## Automatically generated incremental diff
## From:   linux-2.6.18-rc1
## To:     linux-2.6.18-rc2
## Robot:  $Id: make-incremental-diff,v 1.12 2004/01/06 07:19:36 hpa Exp $

diff -urN linux-2.6.18-rc1/CREDITS linux-2.6.18-rc2/CREDITS
--- linux-2.6.18-rc1/CREDITS	2006-07-15 22:34:41.344863701 +0000
+++ linux-2.6.18-rc2/CREDITS	2006-07-15 22:34:46.453418225 +0000
@@ -528,11 +528,11 @@
 S: United Kingdom
 
 N: Luiz Fernando N. Capitulino
-E: lcapitulino@terra.com.br
-E: lcapitulino@prefeitura.sp.gov.br
-W: http://www.telecentros.sp.gov.br
-D: Little fixes and a lot of janitorial work
-S: E-GOV Telecentros SP
+E: lcapitulino@mandriva.com.br
+E: lcapitulino@gmail.com
+W: http://www.cpu.eti.br
+D: misc kernel hacking
+S: Mandriva
 S: Brazil
 
 N: Remy Card
diff -urN linux-2.6.18-rc1/Documentation/DMA-mapping.txt linux-2.6.18-rc2/Documentation/DMA-mapping.txt
--- linux-2.6.18-rc1/Documentation/DMA-mapping.txt	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/Documentation/DMA-mapping.txt	2006-07-15 22:34:46.457418659 +0000
@@ -698,12 +698,12 @@
 always going to be SAC addressable.
 
 The first thing your driver needs to do is query the PCI platform
-layer with your devices DAC addressing capabilities:
+layer if it is capable of handling your devices DAC addressing
+capabilities:
 
-	int pci_dac_set_dma_mask(struct pci_dev *pdev, u64 mask);
+	int pci_dac_dma_supported(struct pci_dev *hwdev, u64 mask);
 
-This routine behaves identically to pci_set_dma_mask.  You may not
-use the following interfaces if this routine fails.
+You may not use the following interfaces if this routine fails.
 
 Next, DMA addresses using this API are kept track of using the
 dma64_addr_t type.  It is guaranteed to be big enough to hold any
diff -urN linux-2.6.18-rc1/Documentation/RCU/whatisRCU.txt linux-2.6.18-rc2/Documentation/RCU/whatisRCU.txt
--- linux-2.6.18-rc1/Documentation/RCU/whatisRCU.txt	2006-07-15 22:34:41.352864569 +0000
+++ linux-2.6.18-rc2/Documentation/RCU/whatisRCU.txt	2006-07-15 22:34:46.461419094 +0000
@@ -687,8 +687,9 @@
 	+	spin_lock(&listmutex);
 		list_for_each_entry(p, head, lp) {
 			if (p->key == key) {
-				list_del(&p->list);
+	-			list_del(&p->list);
 	-			write_unlock(&listmutex);
+	+			list_del_rcu(&p->list);
 	+			spin_unlock(&listmutex);
 	+			synchronize_rcu();
 				kfree(p);
@@ -736,7 +737,7 @@
  5   write_lock(&listmutex);            5   spin_lock(&listmutex);
  6   list_for_each_entry(p, head, lp) { 6   list_for_each_entry(p, head, lp) {
  7     if (p->key == key) {             7     if (p->key == key) {
- 8       list_del(&p->list);            8       list_del(&p->list);
+ 8       list_del(&p->list);            8       list_del_rcu(&p->list);
  9       write_unlock(&listmutex);      9       spin_unlock(&listmutex);
                                        10       synchronize_rcu();
 10       kfree(p);                     11       kfree(p);
diff -urN linux-2.6.18-rc1/Documentation/SubmitChecklist linux-2.6.18-rc2/Documentation/SubmitChecklist
--- linux-2.6.18-rc1/Documentation/SubmitChecklist	2006-07-15 22:34:41.352864569 +0000
+++ linux-2.6.18-rc2/Documentation/SubmitChecklist	2006-07-15 22:34:46.461419094 +0000
@@ -1,57 +1,63 @@
 Linux Kernel patch sumbittal checklist
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-Here are some basic things that developers should do if they
-want to see their kernel patch submittals accepted quicker.
+Here are some basic things that developers should do if they want to see their
+kernel patch submissions accepted more quickly.
 
-These are all above and beyond the documentation that is provided
-in Documentation/SubmittingPatches and elsewhere about submitting
-Linux kernel patches.
+These are all above and beyond the documentation that is provided in
+Documentation/SubmittingPatches and elsewhere regarding submitting Linux
+kernel patches.
 
 
 
-- Builds cleanly with applicable or modified CONFIG options =y, =m, and =n.
-  No gcc warnings/errors, no linker warnings/errors.
+1: Builds cleanly with applicable or modified CONFIG options =y, =m, and
+   =n.  No gcc warnings/errors, no linker warnings/errors.
 
-- Passes allnoconfig, allmodconfig
+2: Passes allnoconfig, allmodconfig
 
-- Builds on multiple CPU arch-es by using local cross-compile tools
-  or something like PLM at OSDL.
+3: Builds on multiple CPU architectures by using local cross-compile tools
+   or something like PLM at OSDL.
 
-- ppc64 is a good architecture for cross-compilation checking because it
-  tends to use `unsigned long' for 64-bit quantities.
+4: ppc64 is a good architecture for cross-compilation checking because it
+   tends to use `unsigned long' for 64-bit quantities.
 
-- Matches kernel coding style(!)
+5: Matches kernel coding style(!)
 
-- Any new or modified CONFIG options don't muck up the config menu.
+6: Any new or modified CONFIG options don't muck up the config menu.
 
-- All new Kconfig options have help text.
+7: All new Kconfig options have help text.
 
-- Has been carefully reviewed with respect to relevant Kconfig
-  combinations.  This is very hard to get right with testing --
-  brainpower pays off here.
+8: Has been carefully reviewed with respect to relevant Kconfig
+   combinations.  This is very hard to get right with testing -- brainpower
+   pays off here.
 
-- Check cleanly with sparse.
+9: Check cleanly with sparse.
 
-- Use 'make checkstack' and 'make namespacecheck' and fix any
-  problems that they find.  Note:  checkstack does not point out
-  problems explicitly, but any one function that uses more than
-  512 bytes on the stack is a candidate for change.
+10: Use 'make checkstack' and 'make namespacecheck' and fix any problems
+    that they find.  Note: checkstack does not point out problems explicitly,
+    but any one function that uses more than 512 bytes on the stack is a
+    candidate for change.
 
-- Include kernel-doc to document global kernel APIs.  (Not required
-  for static functions, but OK there also.)  Use 'make htmldocs'
-  or 'make mandocs' to check the kernel-doc and fix any issues.
+11: Include kernel-doc to document global kernel APIs.  (Not required for
+    static functions, but OK there also.) Use 'make htmldocs' or 'make
+    mandocs' to check the kernel-doc and fix any issues.
 
-- Has been tested with CONFIG_PREEMPT, CONFIG_DEBUG_PREEMPT,
-  CONFIG_DEBUG_SLAB, CONFIG_DEBUG_PAGEALLOC, CONFIG_DEBUG_MUTEXES,
-  CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_SPINLOCK_SLEEP all simultaneously
-  enabled.
+12: Has been tested with CONFIG_PREEMPT, CONFIG_DEBUG_PREEMPT,
+    CONFIG_DEBUG_SLAB, CONFIG_DEBUG_PAGEALLOC, CONFIG_DEBUG_MUTEXES,
+    CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_SPINLOCK_SLEEP all simultaneously
+    enabled.
 
-- Has been build- and runtime tested with and without CONFIG_SMP and
-  CONFIG_PREEMPT.
+13: Has been build- and runtime tested with and without CONFIG_SMP and
+    CONFIG_PREEMPT.
 
-- If the patch affects IO/Disk, etc: has been tested with and without
-  CONFIG_LBD.
+14: If the patch affects IO/Disk, etc: has been tested with and without
+    CONFIG_LBD.
 
+15: All codepaths have been exercised with all lockdep features enabled.
 
-2006-APR-27
+16: All new /proc entries are documented under Documentation/
+
+17: All new kernel boot parameters are documented in
+    Documentation/kernel-parameters.txt.
+
+18: All new module parameters are documented with MODULE_PARM_DESC()
diff -urN linux-2.6.18-rc1/Documentation/accounting/delay-accounting.txt linux-2.6.18-rc2/Documentation/accounting/delay-accounting.txt
--- linux-2.6.18-rc1/Documentation/accounting/delay-accounting.txt	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/Documentation/accounting/delay-accounting.txt	2006-07-15 22:34:46.461419094 +0000
@@ -0,0 +1,110 @@
+Delay accounting
+----------------
+
+Tasks encounter delays in execution when they wait
+for some kernel resource to become available e.g. a
+runnable task may wait for a free CPU to run on.
+
+The per-task delay accounting functionality measures
+the delays experienced by a task while
+
+a) waiting for a CPU (while being runnable)
+b) completion of synchronous block I/O initiated by the task
+c) swapping in pages
+
+and makes these statistics available to userspace through
+the taskstats interface.
+
+Such delays provide feedback for setting a task's cpu priority,
+io priority and rss limit values appropriately. Long delays for
+important tasks could be a trigger for raising its corresponding priority.
+
+The functionality, through its use of the taskstats interface, also provides
+delay statistics aggregated for all tasks (or threads) belonging to a
+thread group (corresponding to a traditional Unix process). This is a commonly
+needed aggregation that is more efficiently done by the kernel.
+
+Userspace utilities, particularly resource management applications, can also
+aggregate delay statistics into arbitrary groups. To enable this, delay
+statistics of a task are available both during its lifetime as well as on its
+exit, ensuring continuous and complete monitoring can be done.
+
+
+Interface
+---------
+
+Delay accounting uses the taskstats interface which is described
+in detail in a separate document in this directory. Taskstats returns a
+generic data structure to userspace corresponding to per-pid and per-tgid
+statistics. The delay accounting functionality populates specific fields of
+this structure. See
+     include/linux/taskstats.h
+for a description of the fields pertaining to delay accounting.
+It will generally be in the form of counters returning the cumulative
+delay seen for cpu, sync block I/O, swapin etc.
+
+Taking the difference of two successive readings of a given
+counter (say cpu_delay_total) for a task will give the delay
+experienced by the task waiting for the corresponding resource
+in that interval.
+
+When a task exits, records containing the per-task statistics
+are sent to userspace without requiring a command. If it is the last exiting
+task of a thread group, the per-tgid statistics are also sent. More details
+are given in the taskstats interface description.
+
+The getdelays.c userspace utility in this directory allows simple commands to
+be run and the corresponding delay statistics to be displayed. It also serves
+as an example of using the taskstats interface.
+
+Usage
+-----
+
+Compile the kernel with
+	CONFIG_TASK_DELAY_ACCT=y
+	CONFIG_TASKSTATS=y
+
+Enable the accounting at boot time by adding
+the following to the kernel boot options
+	delayacct
+
+and after the system has booted up, use a utility
+similar to  getdelays.c to access the delays
+seen by a given task or a task group (tgid).
+The utility also allows a given command to be
+executed and the corresponding delays to be
+seen.
+
+General format of the getdelays command
+
+getdelays [-t tgid] [-p pid] [-c cmd...]
+
+
+Get delays, since system boot, for pid 10
+# ./getdelays -p 10
+(output similar to next case)
+
+Get sum of delays, since system boot, for all pids with tgid 5
+# ./getdelays -t 5
+
+
+CPU	count	real total	virtual total	delay total
+	7876	92005750	100000000	24001500
+IO	count	delay total
+	0	0
+MEM	count	delay total
+	0	0
+
+Get delays seen in executing a given simple command
+# ./getdelays -c ls /
+
+bin   data1  data3  data5  dev  home  media  opt   root  srv        sys  usr
+boot  data2  data4  data6  etc  lib   mnt    proc  sbin  subdomain  tmp  var
+
+
+CPU	count	real total	virtual total	delay total
+	6	4000250		4000000		0
+IO	count	delay total
+	0	0
+MEM	count	delay total
+	0	0
diff -urN linux-2.6.18-rc1/Documentation/accounting/getdelays.c linux-2.6.18-rc2/Documentation/accounting/getdelays.c
--- linux-2.6.18-rc1/Documentation/accounting/getdelays.c	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/Documentation/accounting/getdelays.c	2006-07-15 22:34:46.461419094 +0000
@@ -0,0 +1,396 @@
+/* getdelays.c
+ *
+ * Utility to get per-pid and per-tgid delay accounting statistics
+ * Also illustrates usage of the taskstats interface
+ *
+ * Copyright (C) Shailabh Nagar, IBM Corp. 2005
+ * Copyright (C) Balbir Singh, IBM Corp. 2006
+ * Copyright (c) Jay Lan, SGI. 2006
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <unistd.h>
+#include <poll.h>
+#include <string.h>
+#include <fcntl.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/socket.h>
+#include <sys/types.h>
+#include <signal.h>
+
+#include <linux/genetlink.h>
+#include <linux/taskstats.h>
+
+/*
+ * Generic macros for dealing with netlink sockets. Might be duplicated
+ * elsewhere. It is recommended that commercial grade applications use
+ * libnl or libnetlink and use the interfaces provided by the library
+ */
+#define GENLMSG_DATA(glh)	((void *)(NLMSG_DATA(glh) + GENL_HDRLEN))
+#define GENLMSG_PAYLOAD(glh)	(NLMSG_PAYLOAD(glh, 0) - GENL_HDRLEN)
+#define NLA_DATA(na)		((void *)((char*)(na) + NLA_HDRLEN))
+#define NLA_PAYLOAD(len)	(len - NLA_HDRLEN)
+
+#define err(code, fmt, arg...) do { printf(fmt, ##arg); exit(code); } while (0)
+int done = 0;
+int rcvbufsz=0;
+
+    char name[100];
+int dbg=0, print_delays=0;
+__u64 stime, utime;
+#define PRINTF(fmt, arg...) {			\
+	    if (dbg) {				\
+		printf(fmt, ##arg);		\
+	    }					\
+	}
+
+/* Maximum size of response requested or message sent */
+#define MAX_MSG_SIZE	256
+/* Maximum number of cpus expected to be specified in a cpumask */
+#define MAX_CPUS	32
+/* Maximum length of pathname to log file */
+#define MAX_FILENAME	256
+
+struct msgtemplate {
+	struct nlmsghdr n;
+	struct genlmsghdr g;
+	char buf[MAX_MSG_SIZE];
+};
+
+char cpumask[100+6*MAX_CPUS];
+
+/*
+ * Create a raw netlink socket and bind
+ */
+static int create_nl_socket(int protocol)
+{
+	int fd;
+	struct sockaddr_nl local;
+
+	fd = socket(AF_NETLINK, SOCK_RAW, protocol);
+	if (fd < 0)
+		return -1;
+
+	if (rcvbufsz)
+		if (setsockopt(fd, SOL_SOCKET, SO_RCVBUF,
+				&rcvbufsz, sizeof(rcvbufsz)) < 0) {
+			printf("Unable to set socket rcv buf size to %d\n",
+			       rcvbufsz);
+			return -1;
+		}
+
+	memset(&local, 0, sizeof(local));
+	local.nl_family = AF_NETLINK;
+
+	if (bind(fd, (struct sockaddr *) &local, sizeof(local)) < 0)
+		goto error;
+
+	return fd;
+error:
+	close(fd);
+	return -1;
+}
+
+
+int send_cmd(int sd, __u16 nlmsg_type, __u32 nlmsg_pid,
+	     __u8 genl_cmd, __u16 nla_type,
+	     void *nla_data, int nla_len)
+{
+	struct nlattr *na;
+	struct sockaddr_nl nladdr;
+	int r, buflen;
+	char *buf;
+
+	struct msgtemplate msg;
+
+	msg.n.nlmsg_len = NLMSG_LENGTH(GENL_HDRLEN);
+	msg.n.nlmsg_type = nlmsg_type;
+	msg.n.nlmsg_flags = NLM_F_REQUEST;
+	msg.n.nlmsg_seq = 0;
+	msg.n.nlmsg_pid = nlmsg_pid;
+	msg.g.cmd = genl_cmd;
+	msg.g.version = 0x1;
+	na = (struct nlattr *) GENLMSG_DATA(&msg);
+	na->nla_type = nla_type;
+	na->nla_len = nla_len + 1 + NLA_HDRLEN;
+	memcpy(NLA_DATA(na), nla_data, nla_len);
+	msg.n.nlmsg_len += NLMSG_ALIGN(na->nla_len);
+
+	buf = (char *) &msg;
+	buflen = msg.n.nlmsg_len ;
+	memset(&nladdr, 0, sizeof(nladdr));
+	nladdr.nl_family = AF_NETLINK;
+	while ((r = sendto(sd, buf, buflen, 0, (struct sockaddr *) &nladdr,
+			   sizeof(nladdr))) < buflen) {
+		if (r > 0) {
+			buf += r;
+			buflen -= r;
+		} else if (errno != EAGAIN)
+			return -1;
+	}
+	return 0;
+}
+
+
+/*
+ * Probe the controller in genetlink to find the family id
+ * for the TASKSTATS family
+ */
+int get_family_id(int sd)
+{
+	struct {
+		struct nlmsghdr n;
+		struct genlmsghdr g;
+		char buf[256];
+	} ans;
+
+	int id, rc;
+	struct nlattr *na;
+	int rep_len;
+
+	strcpy(name, TASKSTATS_GENL_NAME);
+	rc = send_cmd(sd, GENL_ID_CTRL, getpid(), CTRL_CMD_GETFAMILY,
+			CTRL_ATTR_FAMILY_NAME, (void *)name,
+			strlen(TASKSTATS_GENL_NAME)+1);
+
+	rep_len = recv(sd, &ans, sizeof(ans), 0);
+	if (ans.n.nlmsg_type == NLMSG_ERROR ||
+	    (rep_len < 0) || !NLMSG_OK((&ans.n), rep_len))
+		return 0;
+
+	na = (struct nlattr *) GENLMSG_DATA(&ans);
+	na = (struct nlattr *) ((char *) na + NLA_ALIGN(na->nla_len));
+	if (na->nla_type == CTRL_ATTR_FAMILY_ID) {
+		id = *(__u16 *) NLA_DATA(na);
+	}
+	return id;
+}
+
+void print_delayacct(struct taskstats *t)
+{
+	printf("\n\nCPU   %15s%15s%15s%15s\n"
+	       "      %15llu%15llu%15llu%15llu\n"
+	       "IO    %15s%15s\n"
+	       "      %15llu%15llu\n"
+	       "MEM   %15s%15s\n"
+	       "      %15llu%15llu\n\n",
+	       "count", "real total", "virtual total", "delay total",
+	       t->cpu_count, t->cpu_run_real_total, t->cpu_run_virtual_total,
+	       t->cpu_delay_total,
+	       "count", "delay total",
+	       t->blkio_count, t->blkio_delay_total,
+	       "count", "delay total", t->swapin_count, t->swapin_delay_total);
+}
+
+int main(int argc, char *argv[])
+{
+	int c, rc, rep_len, aggr_len, len2, cmd_type;
+	__u16 id;
+	__u32 mypid;
+
+	struct nlattr *na;
+	int nl_sd = -1;
+	int len = 0;
+	pid_t tid = 0;
+	pid_t rtid = 0;
+
+	int fd = 0;
+	int count = 0;
+	int write_file = 0;
+	int maskset = 0;
+	char logfile[128];
+	int loop = 0;
+
+	struct msgtemplate msg;
+
+	while (1) {
+		c = getopt(argc, argv, "dw:r:m:t:p:v:l");
+		if (c < 0)
+			break;
+
+		switch (c) {
+		case 'd':
+			printf("print delayacct stats ON\n");
+			print_delays = 1;
+			break;
+		case 'w':
+			strncpy(logfile, optarg, MAX_FILENAME);
+			printf("write to file %s\n", logfile);
+			write_file = 1;
+			break;
+		case 'r':
+			rcvbufsz = atoi(optarg);
+			printf("receive buf size %d\n", rcvbufsz);
+			if (rcvbufsz < 0)
+				err(1, "Invalid rcv buf size\n");
+			break;
+		case 'm':
+			strncpy(cpumask, optarg, sizeof(cpumask));
+			maskset = 1;
+			printf("cpumask %s maskset %d\n", cpumask, maskset);
+			break;
+		case 't':
+			tid = atoi(optarg);
+			if (!tid)
+				err(1, "Invalid tgid\n");
+			cmd_type = TASKSTATS_CMD_ATTR_TGID;
+			print_delays = 1;
+			break;
+		case 'p':
+			tid = atoi(optarg);
+			if (!tid)
+				err(1, "Invalid pid\n");
+			cmd_type = TASKSTATS_CMD_ATTR_PID;
+			print_delays = 1;
+			break;
+		case 'v':
+			printf("debug on\n");
+			dbg = 1;
+			break;
+		case 'l':
+			printf("listen forever\n");
+			loop = 1;
+			break;
+		default:
+			printf("Unknown option %d\n", c);
+			exit(-1);
+		}
+	}
+
+	if (write_file) {
+		fd = open(logfile, O_WRONLY | O_CREAT | O_TRUNC,
+			  S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
+		if (fd == -1) {
+			perror("Cannot open output file\n");
+			exit(1);
+		}
+	}
+
+	if ((nl_sd = create_nl_socket(NETLINK_GENERIC)) < 0)
+		err(1, "error creating Netlink socket\n");
+
+
+	mypid = getpid();
+	id = get_family_id(nl_sd);
+	if (!id) {
+		printf("Error getting family id, errno %d", errno);
+		goto err;
+	}
+	PRINTF("family id %d\n", id);
+
+	if (maskset) {
+		rc = send_cmd(nl_sd, id, mypid, TASKSTATS_CMD_GET,
+			      TASKSTATS_CMD_ATTR_REGISTER_CPUMASK,
+			      &cpumask, sizeof(cpumask));
+		PRINTF("Sent register cpumask, retval %d\n", rc);
+		if (rc < 0) {
+			printf("error sending register cpumask\n");
+			goto err;
+		}
+	}
+
+	if (tid) {
+		rc = send_cmd(nl_sd, id, mypid, TASKSTATS_CMD_GET,
+			      cmd_type, &tid, sizeof(__u32));
+		PRINTF("Sent pid/tgid, retval %d\n", rc);
+		if (rc < 0) {
+			printf("error sending tid/tgid cmd\n");
+			goto done;
+		}
+	}
+
+	do {
+		int i;
+
+		rep_len = recv(nl_sd, &msg, sizeof(msg), 0);
+		PRINTF("received %d bytes\n", rep_len);
+
+		if (rep_len < 0) {
+			printf("nonfatal reply error: errno %d\n", errno);
+			continue;
+		}
+		if (msg.n.nlmsg_type == NLMSG_ERROR ||
+		    !NLMSG_OK((&msg.n), rep_len)) {
+			printf("fatal reply error,  errno %d\n", errno);
+			goto done;
+		}
+
+		PRINTF("nlmsghdr size=%d, nlmsg_len=%d, rep_len=%d\n",
+		       sizeof(struct nlmsghdr), msg.n.nlmsg_len, rep_len);
+
+
+		rep_len = GENLMSG_PAYLOAD(&msg.n);
+
+		na = (struct nlattr *) GENLMSG_DATA(&msg);
+		len = 0;
+		i = 0;
+		while (len < rep_len) {
+			len += NLA_ALIGN(na->nla_len);
+			switch (na->nla_type) {
+			case TASKSTATS_TYPE_AGGR_TGID:
+				/* Fall through */
+			case TASKSTATS_TYPE_AGGR_PID:
+				aggr_len = NLA_PAYLOAD(na->nla_len);
+				len2 = 0;
+				/* For nested attributes, na follows */
+				na = (struct nlattr *) NLA_DATA(na);
+				done = 0;
+				while (len2 < aggr_len) {
+					switch (na->nla_type) {
+					case TASKSTATS_TYPE_PID:
+						rtid = *(int *) NLA_DATA(na);
+						if (print_delays)
+							printf("PID\t%d\n", rtid);
+						break;
+					case TASKSTATS_TYPE_TGID:
+						rtid = *(int *) NLA_DATA(na);
+						if (print_delays)
+							printf("TGID\t%d\n", rtid);
+						break;
+					case TASKSTATS_TYPE_STATS:
+						count++;
+						if (print_delays)
+							print_delayacct((struct taskstats *) NLA_DATA(na));
+						if (fd) {
+							if (write(fd, NLA_DATA(na), na->nla_len) < 0) {
+								err(1,"write error\n");
+							}
+						}
+						if (!loop)
+							goto done;
+						break;
+					default:
+						printf("Unknown nested nla_type %d\n", na->nla_type);
+						break;
+					}
+					len2 += NLA_ALIGN(na->nla_len);
+					na = (struct nlattr *) ((char *) na + len2);
+				}
+				break;
+
+			default:
+				printf("Unknown nla_type %d\n", na->nla_type);
+				break;
+			}
+			na = (struct nlattr *) (GENLMSG_DATA(&msg) + len);
+		}
+	} while (loop);
+done:
+	if (maskset) {
+		rc = send_cmd(nl_sd, id, mypid, TASKSTATS_CMD_GET,
+			      TASKSTATS_CMD_ATTR_DEREGISTER_CPUMASK,
+			      &cpumask, sizeof(cpumask));
+		printf("Sent deregister mask, retval %d\n", rc);
+		if (rc < 0)
+			err(rc, "error sending deregister cpumask\n");
+	}
+err:
+	close(nl_sd);
+	if (fd)
+		close(fd);
+	return 0;
+}
diff -urN linux-2.6.18-rc1/Documentation/accounting/taskstats.txt linux-2.6.18-rc2/Documentation/accounting/taskstats.txt
--- linux-2.6.18-rc1/Documentation/accounting/taskstats.txt	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/Documentation/accounting/taskstats.txt	2006-07-15 22:34:46.461419094 +0000
@@ -0,0 +1,181 @@
+Per-task statistics interface
+-----------------------------
+
+
+Taskstats is a netlink-based interface for sending per-task and
+per-process statistics from the kernel to userspace.
+
+Taskstats was designed for the following benefits:
+
+- efficiently provide statistics during lifetime of a task and on its exit
+- unified interface for multiple accounting subsystems
+- extensibility for use by future accounting patches
+
+Terminology
+-----------
+
+"pid", "tid" and "task" are used interchangeably and refer to the standard
+Linux task defined by struct task_struct.  per-pid stats are the same as
+per-task stats.
+
+"tgid", "process" and "thread group" are used interchangeably and refer to the
+tasks that share an mm_struct i.e. the traditional Unix process. Despite the
+use of tgid, there is no special treatment for the task that is thread group
+leader - a process is deemed alive as long as it has any task belonging to it.
+
+Usage
+-----
+
+To get statistics during a task's lifetime, userspace opens a unicast netlink
+socket (NETLINK_GENERIC family) and sends commands specifying a pid or a tgid.
+The response contains statistics for a task (if pid is specified) or the sum of
+statistics for all tasks of the process (if tgid is specified).
+
+To obtain statistics for tasks which are exiting, the userspace listener
+sends a register command and specifies a cpumask. Whenever a task exits on
+one of the cpus in the cpumask, its per-pid statistics are sent to the
+registered listener. Using cpumasks allows the data received by one listener
+to be limited and assists in flow control over the netlink interface and is
+explained in more detail below.
+
+If the exiting task is the last thread exiting its thread group,
+an additional record containing the per-tgid stats is also sent to userspace.
+The latter contains the sum of per-pid stats for all threads in the thread
+group, both past and present.
+
+getdelays.c is a simple utility demonstrating usage of the taskstats interface
+for reporting delay accounting statistics. Users can register cpumasks,
+send commands and process responses, listen for per-tid/tgid exit data,
+write the data received to a file and do basic flow control by increasing
+receive buffer sizes.
+
+Interface
+---------
+
+The user-kernel interface is encapsulated in include/linux/taskstats.h
+
+To avoid this documentation becoming obsolete as the interface evolves, only
+an outline of the current version is given. taskstats.h always overrides the
+description here.
+
+struct taskstats is the common accounting structure for both per-pid and
+per-tgid data. It is versioned and can be extended by each accounting subsystem
+that is added to the kernel. The fields and their semantics are defined in the
+taskstats.h file.
+
+The data exchanged between user and kernel space is a netlink message belonging
+to the NETLINK_GENERIC family and using the netlink attributes interface.
+The messages are in the format
+
+    +----------+- - -+-------------+-------------------+
+    | nlmsghdr | Pad |  genlmsghdr | taskstats payload |
+    +----------+- - -+-------------+-------------------+
+
+
+The taskstats payload is one of the following three kinds:
+
+1. Commands: Sent from user to kernel. Commands to get data on
+a pid/tgid consist of one attribute, of type TASKSTATS_CMD_ATTR_PID/TGID,
+containing a u32 pid or tgid in the attribute payload. The pid/tgid denotes
+the task/process for which userspace wants statistics.
+
+Commands to register/deregister interest in exit data from a set of cpus
+consist of one attribute, of type
+TASKSTATS_CMD_ATTR_REGISTER/DEREGISTER_CPUMASK and contain a cpumask in the
+attribute payload. The cpumask is specified as an ascii string of
+comma-separated cpu ranges e.g. to listen to exit data from cpus 1,2,3,5,7,8
+the cpumask would be "1-3,5,7-8". If userspace forgets to deregister interest
+in cpus before closing the listening socket, the kernel cleans up its interest
+set over time. However, for the sake of efficiency, an explicit deregistration
+is advisable.
+
+2. Response for a command: sent from the kernel in response to a userspace
+command. The payload is a series of three attributes of type:
+
+a) TASKSTATS_TYPE_AGGR_PID/TGID : attribute containing no payload but indicates
+a pid/tgid will be followed by some stats.
+
+b) TASKSTATS_TYPE_PID/TGID: attribute whose payload is the pid/tgid whose stats
+is being returned.
+
+c) TASKSTATS_TYPE_STATS: attribute with a struct taskstsats as payload. The
+same structure is used for both per-pid and per-tgid stats.
+
+3. New message sent by kernel whenever a task exits. The payload consists of a
+   series of attributes of the following type:
+
+a) TASKSTATS_TYPE_AGGR_PID: indicates next two attributes will be pid+stats
+b) TASKSTATS_TYPE_PID: contains exiting task's pid
+c) TASKSTATS_TYPE_STATS: contains the exiting task's per-pid stats
+d) TASKSTATS_TYPE_AGGR_TGID: indicates next two attributes will be tgid+stats
+e) TASKSTATS_TYPE_TGID: contains tgid of process to which task belongs
+f) TASKSTATS_TYPE_STATS: contains the per-tgid stats for exiting task's process
+
+
+per-tgid stats
+--------------
+
+Taskstats provides per-process stats, in addition to per-task stats, since
+resource management is often done at a process granularity and aggregating task
+stats in userspace alone is inefficient and potentially inaccurate (due to lack
+of atomicity).
+
+However, maintaining per-process, in addition to per-task stats, within the
+kernel has space and time overheads. To address this, the taskstats code
+accumalates each exiting task's statistics into a process-wide data structure.
+When the last task of a process exits, the process level data accumalated also
+gets sent to userspace (along with the per-task data).
+
+When a user queries to get per-tgid data, the sum of all other live threads in
+the group is added up and added to the accumalated total for previously exited
+threads of the same thread group.
+
+Extending taskstats
+-------------------
+
+There are two ways to extend the taskstats interface to export more
+per-task/process stats as patches to collect them get added to the kernel
+in future:
+
+1. Adding more fields to the end of the existing struct taskstats. Backward
+   compatibility is ensured by the version number within the
+   structure. Userspace will use only the fields of the struct that correspond
+   to the version its using.
+
+2. Defining separate statistic structs and using the netlink attributes
+   interface to return them. Since userspace processes each netlink attribute
+   independently, it can always ignore attributes whose type it does not
+   understand (because it is using an older version of the interface).
+
+
+Choosing between 1. and 2. is a matter of trading off flexibility and
+overhead. If only a few fields need to be added, then 1. is the preferable
+path since the kernel and userspace don't need to incur the overhead of
+processing new netlink attributes. But if the new fields expand the existing
+struct too much, requiring disparate userspace accounting utilities to
+unnecessarily receive large structures whose fields are of no interest, then
+extending the attributes structure would be worthwhile.
+
+Flow control for taskstats
+--------------------------
+
+When the rate of task exits becomes large, a listener may not be able to keep
+up with the kernel's rate of sending per-tid/tgid exit data leading to data
+loss. This possibility gets compounded when the taskstats structure gets
+extended and the number of cpus grows large.
+
+To avoid losing statistics, userspace should do one or more of the following:
+
+- increase the receive buffer sizes for the netlink sockets opened by
+listeners to receive exit data.
+
+- create more listeners and reduce the number of cpus being listened to by
+each listener. In the extreme case, there could be one listener for each cpu.
+Users may also consider setting the cpu affinity of the listener to the subset
+of cpus to which it listens, especially if they are listening to just one cpu.
+
+Despite these measures, if the userspace receives ENOBUFS error messages
+indicated overflow of receive buffers, it should take measures to handle the
+loss of data.
+
+----
diff -urN linux-2.6.18-rc1/Documentation/drivers/edac/edac.txt linux-2.6.18-rc2/Documentation/drivers/edac/edac.txt
--- linux-2.6.18-rc1/Documentation/drivers/edac/edac.txt	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/Documentation/drivers/edac/edac.txt	2006-07-15 22:34:46.465419528 +0000
@@ -35,15 +35,14 @@
 to generate parity.  Some vendors do not do this, and thus the parity bit
 can "float" giving false positives.
 
-The PCI Parity EDAC device has the ability to "skip" known flaky
-cards during the parity scan. These are set by the parity "blacklist"
-interface in the sysfs for PCI Parity. (See the PCI section in the sysfs
-section below.) There is also a parity "whitelist" which is used as
-an explicit list of devices to scan, while the blacklist is a list
-of devices to skip.
+[There are patches in the kernel queue which will allow for storage of
+quirks of PCI devices reporting false parity positives. The 2.6.18
+kernel should have those patches included. When that becomes available,
+then EDAC will be patched to utilize that information to "skip" such
+devices.]
 
-EDAC will have future error detectors that will be added or integrated
-into EDAC in the following list:
+EDAC will have future error detectors that will be integrated with
+EDAC or added to it, in the following list:
 
 	MCE	Machine Check Exception
 	MCA	Machine Check Architecture
@@ -93,22 +92,24 @@
 there currently reside 2 'edac' components:
 
 	mc	memory controller(s) system
-	pci	PCI status system
+	pci	PCI control and status system
 
 
 ============================================================================
 Memory Controller (mc) Model
 
 First a background on the memory controller's model abstracted in EDAC.
-Each mc device controls a set of DIMM memory modules. These modules are
+Each 'mc' device controls a set of DIMM memory modules. These modules are
 laid out in a Chip-Select Row (csrowX) and Channel table (chX). There can
-be multiple csrows and two channels.
+be multiple csrows and multiple channels.
 
 Memory controllers allow for several csrows, with 8 csrows being a typical value.
 Yet, the actual number of csrows depends on the electrical "loading"
 of a given motherboard, memory controller and DIMM characteristics.
 
 Dual channels allows for 128 bit data transfers to the CPU from memory.
+Some newer chipsets allow for more than 2 channels, like Fully Buffered DIMMs
+(FB-DIMMs). The following example will assume 2 channels:
 
 
 		Channel 0	Channel 1
@@ -234,23 +235,15 @@
 	The time period, in milliseconds, for polling for error information.
 	Too small a value wastes resources.  Too large a value might delay
 	necessary handling of errors and might loose valuable information for
-	locating the error.  1000 milliseconds (once each second) is about
-	right for most uses.
+	locating the error.  1000 milliseconds (once each second) is the current
+	default. Systems which require all the bandwidth they can get, may
+	increase this.
 
 	LOAD TIME: module/kernel parameter: poll_msec=[0|1]
 
 	RUN TIME: echo "1000" >/sys/devices/system/edac/mc/poll_msec
 
 
-Module Version read-only attribute file:
-
-	'mc_version'
-
-	The EDAC CORE module's version and compile date are shown here to
-	indicate what EDAC is running.
-
-
-
 ============================================================================
 'mcX' DIRECTORIES
 
@@ -284,35 +277,6 @@
 
 
 
-DIMM capability attribute file:
-
-	'edac_capability'
-
-	The EDAC (Error Detection and Correction) capabilities/modes of
-	the memory controller hardware.
-
-
-DIMM Current Capability attribute file:
-
-	'edac_current_capability'
-
-	The EDAC capabilities available with the hardware
-	configuration.  This may not be the same as "EDAC capability"
-	if the correct memory is not used.  If a memory controller is
-	capable of EDAC, but DIMMs without check bits are in use, then
-	Parity, SECDED, S4ECD4ED capabilities will not be available
-	even though the memory controller might be capable of those
-	modes with the proper memory loaded.
-
-
-Memory Type supported on this controller attribute file:
-
-	'supported_mem_type'
-
-	This attribute file displays the memory type, usually
-	buffered and unbuffered DIMMs.
-
-
 Memory Controller name attribute file:
 
 	'mc_name'
@@ -321,16 +285,6 @@
 	that is being utilized.
 
 
-Memory Controller Module name attribute file:
-
-	'module_name'
-
-	This attribute file displays the memory controller module name,
-	version and date built.  The name of the memory controller
-	hardware - some drivers work with multiple controllers and
-	this field shows which hardware is present.
-
-
 Total memory managed by this memory controller attribute file:
 
 	'size_mb'
@@ -432,6 +386,9 @@
 
 	This attribute file will display what type of memory is currently
 	on this csrow. Normally, either buffered or unbuffered memory.
+	Examples:
+		Registered-DDR
+		Unbuffered-DDR
 
 
 EDAC Mode of operation attribute file:
@@ -446,8 +403,13 @@
 
 	'dev_type'
 
-	This attribute file will display what type of DIMM device is
-	being utilized. Example:  x4
+	This attribute file will display what type of DRAM device is
+	being utilized on this DIMM.
+	Examples:
+		x1
+		x2
+		x4
+		x8
 
 
 Channel 0 CE Count attribute file:
@@ -522,10 +484,10 @@
 If logging for UEs and CEs are enabled then system logs will have
 error notices indicating errors that have been detected:
 
-MC0: CE page 0x283, offset 0xce0, grain 8, syndrome 0x6ec3, row 0,
+EDAC MC0: CE page 0x283, offset 0xce0, grain 8, syndrome 0x6ec3, row 0,
 channel 1 "DIMM_B1": amd76x_edac
 
-MC0: CE page 0x1e5, offset 0xfb0, grain 8, syndrome 0xb741, row 0,
+EDAC MC0: CE page 0x1e5, offset 0xfb0, grain 8, syndrome 0xb741, row 0,
 channel 1 "DIMM_B1": amd76x_edac
 
 
@@ -610,64 +572,4 @@
 
 
 
-PCI Device Whitelist:
-
-	'pci_parity_whitelist'
-
-	This control file allows for an explicit list of PCI devices to be
-	scanned for parity errors. Only devices found on this list will
-	be examined.  The list is a line of hexadecimal VENDOR and DEVICE
-	ID tuples:
-
-	1022:7450,1434:16a6
-
-	One or more can be inserted, separated by a comma.
-
-	To write the above list doing the following as one command line:
-
-	echo "1022:7450,1434:16a6"
-		> /sys/devices/system/edac/pci/pci_parity_whitelist
-
-
-
-	To display what the whitelist is, simply 'cat' the same file.
-
-
-PCI Device Blacklist:
-
-	'pci_parity_blacklist'
-
-	This control file allows for a list of PCI devices to be
-	skipped for scanning.
-	The list is a line of hexadecimal VENDOR and DEVICE ID tuples:
-
-	1022:7450,1434:16a6
-
-	One or more can be inserted, separated by a comma.
-
-	To write the above list doing the following as one command line:
-
-	echo "1022:7450,1434:16a6"
-		> /sys/devices/system/edac/pci/pci_parity_blacklist
-
-
-	To display what the whitelist currently contains,
-	simply 'cat' the same file.
-
 =======================================================================
-
-PCI Vendor and Devices IDs can be obtained with the lspci command. Using
-the -n option lspci will display the vendor and device IDs. The system
-administrator will have to determine which devices should be scanned or
-skipped.
-
-
-
-The two lists (white and black) are prioritized. blacklist is the lower
-priority and will NOT be utilized when a whitelist has been set.
-Turn OFF a whitelist by an empty echo command:
-
-	echo > /sys/devices/system/edac/pci/pci_parity_whitelist
-
-and any previous blacklist will be utilized.
-
diff -urN linux-2.6.18-rc1/Documentation/feature-removal-schedule.txt linux-2.6.18-rc2/Documentation/feature-removal-schedule.txt
--- linux-2.6.18-rc1/Documentation/feature-removal-schedule.txt	2006-07-15 22:34:41.356865003 +0000
+++ linux-2.6.18-rc2/Documentation/feature-removal-schedule.txt	2006-07-15 22:34:46.465419528 +0000
@@ -55,14 +55,6 @@
 
 ---------------------------
 
-What:	remove EXPORT_SYMBOL(insert_resource)
-When:	April 2006
-Files:	kernel/resource.c
-Why:	No modular usage in the kernel.
-Who:	Adrian Bunk <bunk@stusta.de>
-
----------------------------
-
 What:	PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
 When:	November 2005
 Files:	drivers/pcmcia/: pcmcia_ioctl.c
@@ -166,17 +158,6 @@
 
 ---------------------------
 
-What:	remove EXPORT_SYMBOL(tasklist_lock)
-When:	August 2006
-Files:	kernel/fork.c
-Why:	tasklist_lock protects the kernel internal task list.  Modules have
-	no business looking at it, and all instances in drivers have been due
-	to use of too-lowlevel APIs.  Having this symbol exported prevents
-	moving to more scalable locking schemes for the task list.
-Who:	Christoph Hellwig <hch@lst.de>
-
----------------------------
-
 What:	mount/umount uevents
 When:	February 2007
 Why:	These events are not correct, and do not properly let userspace know
@@ -266,3 +247,14 @@
 Who:	Thomas Gleixner <tglx@linutronix.de>
 
 ---------------------------
+
+What:	i2c-ite and i2c-algo-ite drivers
+When:	September 2006
+Why:	These drivers never compiled since they were added to the kernel
+	tree 5 years ago. This feature removal can be reevaluated if
+	someone shows interest in the drivers, fixes them and takes over
+	maintenance.
+	http://marc.theaimsgroup.com/?l=linux-mips&m=115040510817448
+Who:	Jean Delvare <khali@linux-fr.org>
+
+---------------------------
diff -urN linux-2.6.18-rc1/Documentation/filesystems/Locking linux-2.6.18-rc2/Documentation/filesystems/Locking
--- linux-2.6.18-rc1/Documentation/filesystems/Locking	2006-07-15 22:34:41.356865003 +0000
+++ linux-2.6.18-rc2/Documentation/filesystems/Locking	2006-07-15 22:34:46.465419528 +0000
@@ -142,8 +142,8 @@
 
 --------------------------- file_system_type ---------------------------
 prototypes:
-	struct int (*get_sb) (struct file_system_type *, int,
-			const char *, void *, struct vfsmount *);
+	int (*get_sb) (struct file_system_type *, int,
+		       const char *, void *, struct vfsmount *);
 	void (*kill_sb) (struct super_block *);
 locking rules:
 		may block	BKL
diff -urN linux-2.6.18-rc1/Documentation/filesystems/vfs.txt linux-2.6.18-rc2/Documentation/filesystems/vfs.txt
--- linux-2.6.18-rc1/Documentation/filesystems/vfs.txt	2006-07-15 22:34:41.360865437 +0000
+++ linux-2.6.18-rc2/Documentation/filesystems/vfs.txt	2006-07-15 22:34:46.473420396 +0000
@@ -113,8 +113,8 @@
 struct file_system_type {
 	const char *name;
 	int fs_flags;
-        struct int (*get_sb) (struct file_system_type *, int,
-                              const char *, void *, struct vfsmount *);
+        int (*get_sb) (struct file_system_type *, int,
+                       const char *, void *, struct vfsmount *);
         void (*kill_sb) (struct super_block *);
         struct module *owner;
         struct file_system_type * next;
diff -urN linux-2.6.18-rc1/Documentation/hwmon/abituguru linux-2.6.18-rc2/Documentation/hwmon/abituguru
--- linux-2.6.18-rc1/Documentation/hwmon/abituguru	2006-07-15 22:34:41.364865872 +0000
+++ linux-2.6.18-rc2/Documentation/hwmon/abituguru	2006-07-15 22:34:46.473420396 +0000
@@ -2,13 +2,36 @@
 =======================
 
 Supported chips:
-  * Abit uGuru (Hardware Monitor part only)
+  * Abit uGuru revision 1-3 (Hardware Monitor part only)
     Prefix: 'abituguru'
     Addresses scanned: ISA 0x0E0
     Datasheet: Not available, this driver is based on reverse engineering.
 	A "Datasheet" has been written based on the reverse engineering it
 	should be available in the same dir as this file under the name
 	abituguru-datasheet.
+    Note:
+	The uGuru is a microcontroller with onboard firmware which programs
+	it to behave as a hwmon IC. There are many different revisions of the
+	firmware and thus effectivly many different revisions of the uGuru.
+	Below is an incomplete list with which revisions are used for which
+	Motherboards:
+	uGuru 1.00    ~ 1.24    (AI7, KV8-MAX3, AN7) (1)
+	uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO)
+	uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8)
+	uGuru 2.2.0.0 ~ 2.2.0.6 (AA8 Fatal1ty)
+	uGuru 2.3.0.0 ~ 2.3.0.9 (AN8)
+	uGuru 3.0.0.0 ~ 3.0.1.2 (AW8, AL8, NI8)
+	uGuru 4.xxxxx?          (AT8 32X) (2)
+	1) For revisions 2 and 3 uGuru's the driver can autodetect the
+	   sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's
+	   this doesnot always work. For these uGuru's the autodection can
+	   be overriden with the bank1_types module param. For all 3 known
+	   revison 1 motherboards the correct use of this param is:
+	   bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1
+	   You may also need to specify the fan_sensors option for these boards
+	   fan_sensors=5
+	2) The current version of the abituguru driver is known to NOT work
+	   on these Motherboards
 
 Authors:
 	Hans de Goede <j.w.r.degoede@hhs.nl>,
@@ -22,6 +45,11 @@
 * force: bool		Force detection. Note this parameter only causes the
 			detection to be skipped, if the uGuru can't be read
 			the module initialization (insmod) will still fail.
+* bank1_types: int[]	Bank1 sensortype autodetection override:
+			  -1 autodetect (default)
+			   0 volt sensor
+			   1 temp sensor
+			   2 not connected
 * fan_sensors: int	Tell the driver how many fan speed sensors there are
 			on your motherboard. Default: 0 (autodetect).
 * pwms: int		Tell the driver how many fan speed controls (fan
@@ -29,7 +57,7 @@
 * verbose: int		How verbose should the driver be? (0-3):
 			   0 normal output
 			   1 + verbose error reporting
-			   2 + sensors type probing info\n"
+			   2 + sensors type probing info (default)
 			   3 + retryable error reporting
 			Default: 2 (the driver is still in the testing phase)
 
diff -urN linux-2.6.18-rc1/Documentation/i2c/busses/i2c-sis96x linux-2.6.18-rc2/Documentation/i2c/busses/i2c-sis96x
--- linux-2.6.18-rc1/Documentation/i2c/busses/i2c-sis96x	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/Documentation/i2c/busses/i2c-sis96x	2006-07-15 22:34:46.477420831 +0000
@@ -42,8 +42,8 @@
 chipsets as well: 635, and 635T. If anyone owns a board with those chips
 AND is willing to risk crashing & burning an otherwise well-behaved kernel
 in the name of progress... please contact me at <mhoffman@lightlink.com> or
-via the project's mailing list: <lm-sensors@lm-sensors.org>.  Please
-send bug reports and/or success stories as well.
+via the project's mailing list: <i2c@lm-sensors.org>.  Please send bug
+reports and/or success stories as well.
 
 
 TO DOs
diff -urN linux-2.6.18-rc1/Documentation/kernel-parameters.txt linux-2.6.18-rc2/Documentation/kernel-parameters.txt
--- linux-2.6.18-rc1/Documentation/kernel-parameters.txt	2006-07-15 22:34:41.368866306 +0000
+++ linux-2.6.18-rc2/Documentation/kernel-parameters.txt	2006-07-15 22:34:46.481421265 +0000
@@ -448,6 +448,8 @@
 			Format: <area>[,<node>]
 			See also Documentation/networking/decnet.txt.
 
+	delayacct	[KNL] Enable per-task delay accounting
+
 	dhash_entries=	[KNL]
 			Set number of hash buckets for dentry cache.
 
diff -urN linux-2.6.18-rc1/Documentation/memory-barriers.txt linux-2.6.18-rc2/Documentation/memory-barriers.txt
--- linux-2.6.18-rc1/Documentation/memory-barriers.txt	2006-07-15 22:34:41.368866306 +0000
+++ linux-2.6.18-rc2/Documentation/memory-barriers.txt	2006-07-15 22:34:46.481421265 +0000
@@ -1015,10 +1015,9 @@
 There are some more advanced barrier functions:
 
  (*) set_mb(var, value)
- (*) set_wmb(var, value)
 
-     These assign the value to the variable and then insert at least a write
-     barrier after it, depending on the function.  They aren't guaranteed to
+     This assigns the value to the variable and then inserts at least a write
+     barrier after it, depending on the function.  It isn't guaranteed to
      insert anything more than a compiler barrier in a UP compilation.
 
 
diff -urN linux-2.6.18-rc1/Documentation/mips/time.README linux-2.6.18-rc2/Documentation/mips/time.README
--- linux-2.6.18-rc1/Documentation/mips/time.README	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/Documentation/mips/time.README	2006-07-15 22:34:46.481421265 +0000
@@ -65,7 +65,7 @@
 	1. (optional) set up RTC routines
 	2. (optional) calibrate and set the mips_counter_frequency
 
-  b) board_timer_setup - a function pointer.  Invoked at the end of time_init()
+  b) plat_timer_setup - a function pointer.  Invoked at the end of time_init()
 	1. (optional) over-ride any decisions made in time_init()
 	2. set up the irqaction for timer interrupt.
 	3. enable the timer interrupt
@@ -116,19 +116,17 @@
 
   If you supply board_time_init(), set the function poointer.
 
-  Set the function pointer board_timer_setup() (mandatory)
 
-
-Step 3: implement rtc routines, board_time_init() and board_timer_setup()
+Step 3: implement rtc routines, board_time_init() and plat_timer_setup()
   if needed.
 
-  board_time_init() - 
+  board_time_init() -
   	a) (optional) set up RTC routines, 
         b) (optional) calibrate and set the mips_counter_frequency
  	    (only needed if you intended to use fixed_rate_gettimeoffset
  	     or use cpu counter as timer interrupt source)
 
-  board_timer_setup() - 
+  plat_timer_setup() -
  	a) (optional) over-write any choices made above by time_init().
  	b) machine specific code should setup the timer irqaction.
  	c) enable the timer interrupt
diff -urN linux-2.6.18-rc1/Documentation/nfsroot.txt linux-2.6.18-rc2/Documentation/nfsroot.txt
--- linux-2.6.18-rc1/Documentation/nfsroot.txt	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/Documentation/nfsroot.txt	2006-07-15 22:34:46.485421699 +0000
@@ -4,15 +4,16 @@
 Written 1996 by Gero Kuhlmann <gero@gkminix.han.de>
 Updated 1997 by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
 Updated 2006 by Nico Schottelius <nico-kernel-nfsroot@schottelius.org>
+Updated 2006 by Horms <horms@verge.net.au>
 
 
 
-If you want to use a diskless system, as an X-terminal or printer
-server for example, you have to put your root filesystem onto a
-non-disk device. This can either be a ramdisk (see initrd.txt in
-this directory for further information) or a filesystem mounted
-via NFS. The following text describes on how to use NFS for the
-root filesystem. For the rest of this text 'client' means the
+In order to use a diskless system, such as an X-terminal or printer server
+for example, it is necessary for the root filesystem to be present on a
+non-disk device. This may be an initramfs (see Documentation/filesystems/
+ramfs-rootfs-initramfs.txt), a ramdisk (see Documenation/initrd.txt) or a
+filesystem mounted via NFS. The following text describes on how to use NFS
+for the root filesystem. For the rest of this text 'client' means the
 diskless system, and 'server' means the NFS server.
 
 
@@ -21,11 +22,13 @@
 1.) Enabling nfsroot capabilities
     -----------------------------
 
-In order to use nfsroot you have to select support for NFS during
-kernel configuration. Note that NFS cannot be loaded as a module
-in this case. The configuration script will then ask you whether
-you want to use nfsroot, and if yes what kind of auto configuration
-system you want to use. Selecting both BOOTP and RARP is safe.
+In order to use nfsroot, NFS client support needs to be selected as
+built-in during configuration. Once this has been selected, the nfsroot
+option will become available, which should also be selected.
+
+In the networking options, kernel level autoconfiguration can be selected,
+along with the types of autoconfiguration to support. Selecting all of
+DHCP, BOOTP and RARP is safe.
 
 
 
@@ -33,11 +36,10 @@
 2.) Kernel command line
     -------------------
 
-When the kernel has been loaded by a boot loader (either by loadlin,
-LILO or a network boot program) it has to be told what root fs device
-to use, and where to find the server and the name of the directory
-on the server to mount as root. This can be established by a couple
-of kernel command line parameters:
+When the kernel has been loaded by a boot loader (see below) it needs to be
+told what root fs device to use. And in the case of nfsroot, where to find
+both the server and the name of the directory on the server to mount as root.
+This can be established using the following kernel command line parameters:
 
 
 root=/dev/nfs
@@ -49,23 +51,21 @@
 
 nfsroot=[<server-ip>:]<root-dir>[,<nfs-options>]
 
-  If the `nfsroot' parameter is NOT given on the command line, the default
-  "/tftpboot/%s" will be used.
+  If the `nfsroot' parameter is NOT given on the command line,
+  the default "/tftpboot/%s" will be used.
 
-  <server-ip>	Specifies the IP address of the NFS server. If this field
-		is not given, the default address as determined by the
-		`ip' variable (see below) is used. One use of this
-		parameter is for example to allow using different servers
-		for RARP and NFS. Usually you can leave this blank.
-
-  <root-dir>	Name of the directory on the server to mount as root. If
-		there is a "%s" token in the string, the token will be
-		replaced by the ASCII-representation of the client's IP
-		address.
+  <server-ip>	Specifies the IP address of the NFS server.
+		The default address is determined by the `ip' parameter
+		(see below). This parameter allows the use of different
+		servers for IP autoconfiguration and NFS.
+
+  <root-dir>	Name of the directory on the server to mount as root.
+		If there is a "%s" token in the string, it will be
+		replaced by the ASCII-representation of the client's
+		IP address.
 
   <nfs-options>	Standard NFS options. All options are separated by commas.
-		If the options field is not given, the following defaults
-		will be used:
+		The following defaults are used:
 			port		= as given by server portmap daemon
 			rsize		= 1024
 			wsize		= 1024
@@ -81,129 +81,174 @@
 ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
 
   This parameter tells the kernel how to configure IP addresses of devices
-  and also how to set up the IP routing table. It was originally called `nfsaddrs',
-  but now the boot-time IP configuration works independently of NFS, so it
-  was renamed to `ip' and the old name remained as an alias for compatibility
-  reasons.
+  and also how to set up the IP routing table. It was originally called
+  `nfsaddrs', but now the boot-time IP configuration works independently of
+  NFS, so it was renamed to `ip' and the old name remained as an alias for
+  compatibility reasons.
 
   If this parameter is missing from the kernel command line, all fields are
   assumed to be empty, and the defaults mentioned below apply. In general
-  this means that the kernel tries to configure everything using both
-  RARP and BOOTP (depending on what has been enabled during kernel confi-
-  guration, and if both what protocol answer got in first).
-
-  <client-ip>	IP address of the client. If empty, the address will either
-		be determined by RARP or BOOTP. What protocol is used de-
-		pends on what has been enabled during kernel configuration
-		and on the <autoconf> parameter. If this parameter is not
-		empty, neither RARP nor BOOTP will be used.
+  this means that the kernel tries to configure everything using
+  autoconfiguration.
+
+  The <autoconf> parameter can appear alone as the value to the `ip'
+  parameter (without all the ':' characters before) in which case auto-
+  configuration is used.
+
+  <client-ip>	IP address of the client.
+
+  		Default:  Determined using autoconfiguration.
 
   <server-ip>	IP address of the NFS server. If RARP is used to determine
 		the client address and this parameter is NOT empty only
-		replies from the specified server are accepted. To use
-		different RARP and NFS server, specify your RARP server
-		here (or leave it blank), and specify your NFS server in
-		the `nfsroot' parameter (see above). If this entry is blank
-		the address of the server is used which answered the RARP
-		or BOOTP request.
-
-  <gw-ip>	IP address of a gateway if the server is on a different
-		subnet. If this entry is empty no gateway is used and the
-		server is assumed to be on the local network, unless a
-		value has been received by BOOTP.
+		replies from the specified server are accepted.
+
+		Only required for for NFS root. That is autoconfiguration
+		will not be triggered if it is missing and NFS root is not
+		in operation.
+
+		Default: Determined using autoconfiguration.
+		         The address of the autoconfiguration server is used.
 
-  <netmask>	Netmask for local network interface. If this is empty,
+  <gw-ip>	IP address of a gateway if the server is on a different subnet.
+
+		Default: Determined using autoconfiguration.
+
+  <netmask>	Netmask for local network interface. If unspecified
 		the netmask is derived from the client IP address assuming
-		classful addressing, unless overridden in BOOTP reply.
+		classful addressing.
 
-  <hostname>	Name of the client. If empty, the client IP address is
-		used in ASCII notation, or the value received by BOOTP.
+		Default:  Determined using autoconfiguration.
 
-  <device>	Name of network device to use. If this is empty, all
-		devices are used for RARP and BOOTP requests, and the
-		first one we receive a reply on is configured. If you have
-		only one device, you can safely leave this blank.
-
-  <autoconf>	Method to use for autoconfiguration. If this is either
-		'rarp' or 'bootp', the specified protocol is used.
-		If the value is 'both' or empty, both protocols are used
-		so far as they have been enabled during kernel configura-
-		tion. 'off' means no autoconfiguration.
+  <hostname>	Name of the client. May be supplied by autoconfiguration,
+  		but its absence will not trigger autoconfiguration.
 
-  The <autoconf> parameter can appear alone as the value to the `ip'
-  parameter (without all the ':' characters before) in which case auto-
-  configuration is used.
+  		Default: Client IP address is used in ASCII notation.
+
+  <device>	Name of network device to use.
+
+		Default: If the host only has one device, it is used.
+			 Otherwise the device is determined using
+			 autoconfiguration. This is done by sending
+			 autoconfiguration requests out of all devices,
+			 and using the device that received the first reply.
 
+  <autoconf>	Method to use for autoconfiguration. In the case of options
+                which specify multiple autoconfiguration protocols,
+		requests are sent using all protocols, and the first one
+		to reply is used.
 
+		Only autoconfiguration protocols that have been compiled
+		into the kernel will be used, regardless of the value of
+		this option.
 
+                  off or none: don't use autoconfiguration (default)
+		  on or any:   use any protocol available in the kernel
+		  dhcp:        use DHCP
+		  bootp:       use BOOTP
+		  rarp:        use RARP
+		  both:        use both BOOTP and RARP but not DHCP
+		               (old option kept for backwards compatibility)
 
-3.) Kernel loader
-    -------------
+                Default: any
 
-To get the kernel into memory different approaches can be used. They
-depend on what facilities are available:
 
 
-3.1)  Writing the kernel onto a floppy using dd:
-	As always you can just write the kernel onto a floppy using dd,
-	but then it's not possible to use kernel command lines at all.
-	To substitute the 'root=' parameter, create a dummy device on any
-	linux system with major number 0 and minor number 255 using mknod:
 
-		mknod /dev/boot255 c 0 255
+3.) Boot Loader
+    ----------
 
-	Then copy the kernel zImage file onto a floppy using dd:
+To get the kernel into memory different approaches can be used.
+They depend on various facilities being available:
 
-		dd if=/usr/src/linux/arch/i386/boot/zImage of=/dev/fd0
 
-	And finally use rdev to set the root device:
+3.1)  Booting from a floppy using syslinux
 
-		rdev /dev/fd0 /dev/boot255
+	When building kernels, an easy way to create a boot floppy that uses
+	syslinux is to use the zdisk or bzdisk make targets which use
+      	and bzimage images respectively. Both targets accept the
+     	FDARGS parameter which can be used to set the kernel command line.
 
-	You can then remove the dummy device /dev/boot255 again. There
-	is no real device available for it.
-	The other two kernel command line parameters cannot be substi-
-	tuted with rdev. Therefore, using this method the kernel will
-	by default use RARP and/or BOOTP, and if it gets an answer via
-	RARP will mount the directory /tftpboot/<client-ip>/ as its
-	root. If it got a BOOTP answer the directory name in that answer
-	is used.
+	e.g.
+	   make bzdisk FDARGS="root=/dev/nfs"
+
+   	Note that the user running this command will need to have
+     	access to the floppy drive device, /dev/fd0
+
+     	For more information on syslinux, including how to create bootdisks
+     	for prebuilt kernels, see http://syslinux.zytor.com/
+
+	N.B: Previously it was possible to write a kernel directly to
+	     a floppy using dd, configure the boot device using rdev, and
+	     boot using the resulting floppy. Linux no longer supports this
+	     method of booting.
+
+3.2) Booting from a cdrom using isolinux
+
+     	When building kernels, an easy way to create a bootable cdrom that
+     	uses isolinux is to use the isoimage target which uses a bzimage
+     	image. Like zdisk and bzdisk, this target accepts the FDARGS
+     	parameter which can be used to set the kernel command line.
+
+	e.g.
+	  make isoimage FDARGS="root=/dev/nfs"
+
+     	The resulting iso image will be arch/<ARCH>/boot/image.iso
+     	This can be written to a cdrom using a variety of tools including
+     	cdrecord.
+
+	e.g.
+	  cdrecord dev=ATAPI:1,0,0 arch/i386/boot/image.iso
+
+     	For more information on isolinux, including how to create bootdisks
+     	for prebuilt kernels, see http://syslinux.zytor.com/
 
 3.2) Using LILO
-	When using LILO you can specify all necessary command line
-	parameters with the 'append=' command in the LILO configuration
-	file. However, to use the 'root=' command you also need to
-	set up a dummy device as described in 3.1 above. For how to use
-	LILO and its 'append=' command please refer to the LILO
-	documentation.
+	When using LILO all the necessary command line parameters may be
+	specified using the 'append=' directive in the LILO configuration
+	file.
+
+	However, to use the 'root=' directive you also need to create
+	a dummy root device, which may be removed after LILO is run.
+
+	mknod /dev/boot255 c 0 255
+
+	For information on configuring LILO, please refer to its documentation.
 
 3.3) Using GRUB
-	When you use GRUB, you simply append the parameters after the kernel
-	specification: "kernel <kernel> <parameters>" (without the quotes).
+	When using GRUB, kernel parameter are simply appended after the kernel
+	specification: kernel <kernel> <parameters>
 
 3.4) Using loadlin
-	When you want to boot Linux from a DOS command prompt without
-	having a local hard disk to mount as root, you can use loadlin.
-	I was told that it works, but haven't used it myself yet. In
-	general you should be able to create a kernel command line simi-
-	lar to how LILO is doing it. Please refer to the loadlin docu-
-	mentation for further information.
+	loadlin may be used to boot Linux from a DOS command prompt without
+	requiring a local hard disk to mount as root. This has not been
+	thoroughly tested by the authors of this document, but in general
+	it should be possible configure the kernel command line similarly
+	to the configuration of LILO.
+
+	Please refer to the loadlin documentation for further information.
 
 3.5) Using a boot ROM
-	This is probably the most elegant way of booting a diskless
-	client. With a boot ROM the kernel gets loaded using the TFTP
-	protocol. As far as I know, no commercial boot ROMs yet
-	support booting Linux over the network, but there are two
-	free implementations of a boot ROM available on sunsite.unc.edu
-	and its mirrors. They are called 'netboot-nfs' and 'etherboot'.
-	Both contain everything you need to boot a diskless Linux client.
+	This is probably the most elegant way of booting a diskless client.
+	With a boot ROM the kernel is loaded using the TFTP protocol. The
+	authors of this document are not aware of any no commercial boot
+	ROMs that support booting Linux over the network. However, there
+	are two free implementations of a boot ROM, netboot-nfs and
+	etherboot, both of which are available on sunsite.unc.edu, and both
+	of which contain everything you need to boot a diskless Linux client.
 
 3.6) Using pxelinux
-	Using pxelinux you specify the kernel you built with
+	Pxelinux may be used to boot linux using the PXE boot loader
+	which is present on many modern network cards.
+
+	When using pxelinux, the kernel image is specified using
 	"kernel <relative-path-below /tftpboot>". The nfsroot parameters
 	are passed to the kernel by adding them to the "append" line.
-	You may perhaps also want to fine tune the console output,
-	see Documentation/serial-console.txt for serial console help.
+	It is common to use serial console in conjunction with pxeliunx,
+	see Documentation/serial-console.txt for more information.
+
+	For more information on isolinux, including how to create bootdisks
+	for prebuilt kernels, see http://syslinux.zytor.com/
 
 
 
diff -urN linux-2.6.18-rc1/Documentation/ramdisk.txt linux-2.6.18-rc2/Documentation/ramdisk.txt
--- linux-2.6.18-rc1/Documentation/ramdisk.txt	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/Documentation/ramdisk.txt	2006-07-15 22:34:46.489422133 +0000
@@ -6,7 +6,7 @@
 	1) Overview
 	2) Kernel Command Line Parameters
 	3) Using "rdev -r"
-	4) An Example of Creating a Compressed RAM Disk 
+	4) An Example of Creating a Compressed RAM Disk
 
 
 1) Overview
@@ -34,7 +34,7 @@
 compatibility reasons, but it may be removed in the future.
 
 The new RAM disk also has the ability to load compressed RAM disk images,
-allowing one to squeeze more programs onto an average installation or 
+allowing one to squeeze more programs onto an average installation or
 rescue floppy disk.
 
 
@@ -51,7 +51,7 @@
 	===================
 
 This parameter tells the RAM disk driver how many bytes to use per block.  The
-default is 512.
+default is 1024 (BLOCK_SIZE).
 
 
 3) Using "rdev -r"
@@ -70,7 +70,7 @@
 ./arch/i386/kernel/setup.c:#define RAMDISK_PROMPT_FLAG          0x8000
 ./arch/i386/kernel/setup.c:#define RAMDISK_LOAD_FLAG            0x4000
 
-Consider a typical two floppy disk setup, where you will have the 
+Consider a typical two floppy disk setup, where you will have the
 kernel on disk one, and have already put a RAM disk image onto disk #2.
 
 Hence you want to set bits 0 to 13 as 0, meaning that your RAM disk
@@ -97,12 +97,12 @@
 	append = "load_ramdisk=1"
 
 
-4) An Example of Creating a Compressed RAM Disk 
+4) An Example of Creating a Compressed RAM Disk
 ----------------------------------------------
 
 To create a RAM disk image, you will need a spare block device to
 construct it on. This can be the RAM disk device itself, or an
-unused disk partition (such as an unmounted swap partition). For this 
+unused disk partition (such as an unmounted swap partition). For this
 example, we will use the RAM disk device, "/dev/ram0".
 
 Note: This technique should not be done on a machine with less than 8 MB
diff -urN linux-2.6.18-rc1/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl linux-2.6.18-rc2/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
--- linux-2.6.18-rc1/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl	2006-07-15 22:34:41.380867609 +0000
+++ linux-2.6.18-rc2/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl	2006-07-15 22:34:46.493422568 +0000
@@ -1172,7 +1172,7 @@
   }        
 
   /* PCI IDs */
-  static struct pci_device_id snd_mychip_ids[] __devinitdata = {
+  static struct pci_device_id snd_mychip_ids[] = {
           { PCI_VENDOR_ID_FOO, PCI_DEVICE_ID_BAR,
             PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
           ....
@@ -1565,7 +1565,7 @@
         <informalexample>
           <programlisting>
 <![CDATA[
-  static struct pci_device_id snd_mychip_ids[] __devinitdata = {
+  static struct pci_device_id snd_mychip_ids[] = {
           { PCI_VENDOR_ID_FOO, PCI_DEVICE_ID_BAR,
             PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
           ....
diff -urN linux-2.6.18-rc1/Documentation/usb/usb-serial.txt linux-2.6.18-rc2/Documentation/usb/usb-serial.txt
--- linux-2.6.18-rc1/Documentation/usb/usb-serial.txt	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/Documentation/usb/usb-serial.txt	2006-07-15 22:34:46.497423002 +0000
@@ -399,10 +399,10 @@
 
 Prolific PL2303 Driver
 
-  This driver support any device that has the PL2303 chip from Prolific
+  This driver supports any device that has the PL2303 chip from Prolific
   in it.  This includes a number of single port USB to serial
   converters and USB GPS devices.  Devices from Aten (the UC-232) and
-  IO-Data work with this driver.
+  IO-Data work with this driver, as does the DCU-11 mobile-phone cable.
 
   For any questions or problems with this driver, please contact Greg
   Kroah-Hartman at greg@kroah.com
diff -urN linux-2.6.18-rc1/MAINTAINERS linux-2.6.18-rc2/MAINTAINERS
--- linux-2.6.18-rc1/MAINTAINERS	2006-07-15 22:34:41.388868477 +0000
+++ linux-2.6.18-rc2/MAINTAINERS	2006-07-15 22:34:46.505423870 +0000
@@ -274,7 +274,7 @@
 ALI1563 I2C DRIVER
 P:	Rudolf Marek
 M:	r.marek@sh.cvut.cz
-L:	lm-sensors@lm-sensors.org
+L:	i2c@lm-sensors.org
 S:	Maintained
 
 ALPHA PORT
@@ -601,6 +601,15 @@
 T:	git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
 S:	Maintained
 
+CALGARY x86-64 IOMMU
+P:	Muli Ben-Yehuda
+M:	muli@il.ibm.com
+P:	Jon D. Mason
+M:	jdmason@us.ibm.com
+L:	linux-kernel@vger.kernel.org
+L:	discuss@x86-64.org
+S:	Maintained
+
 COMMON INTERNET FILE SYSTEM (CIFS)
 P:	Steve French
 M:	sfrench@samba.org
@@ -762,6 +771,7 @@
 P:	Jamie Lenehan
 M:	lenehan@twibble.org
 W:	http://twibble.org/dist/dc395x/
+L:	dc395x@twibble.org
 L:	http://lists.twibble.org/mailman/listinfo/dc395x/
 S:	Maintained
 
@@ -1240,7 +1250,7 @@
 I2C SUBSYSTEM
 P:	Jean Delvare
 M:	khali@linux-fr.org
-L:	lm-sensors@lm-sensors.org
+L:	i2c@lm-sensors.org
 W:	http://www.lm-sensors.nu/
 T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:	Maintained
@@ -1492,6 +1502,7 @@
 M:	yi.zhu@intel.com
 P:	James Ketrenos
 M:	jketreno@linux.intel.com
+L:	ipw2100-devel@lists.sourceforge.net
 L:	http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
 W:	http://ipw2100.sourceforge.net
 S:	Supported
@@ -1501,6 +1512,7 @@
 M:	yi.zhu@intel.com
 P:	James Ketrenos
 M:	jketreno@linux.intel.com
+L:	ipw2100-devel@lists.sourceforge.net
 L:	http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
 W:	http://ipw2200.sourceforge.net
 S:	Supported
@@ -2084,7 +2096,7 @@
 OPENCORES I2C BUS DRIVER
 P:	Peter Korsgaard
 M:	jacmet@sunsite.dk
-L:	lm-sensors@lm-sensors.org
+L:	i2c@lm-sensors.org
 S:	Maintained
 
 ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
@@ -2217,6 +2229,7 @@
 
 PCMCIA SUBSYSTEM
 P:	Linux PCMCIA Team
+L:	linux-pcmcia@lists.infradead.org
 L:	http://lists.infradead.org/mailman/listinfo/linux-pcmcia
 T:	git kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
 S:	Maintained
@@ -2227,6 +2240,12 @@
 L:	netdev@vger.kernel.org
 S:	Maintained
 
+PER-TASK DELAY ACCOUNTING
+P:	Shailabh Nagar
+M:	nagar@watson.ibm.com
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+
 PERSONALITY HANDLING
 P:	Christoph Hellwig
 M:	hch@infradead.org
@@ -2666,6 +2685,11 @@
 L:	netdev@vger.kernel.org
 S:	Maintained
 
+SOEKRIS NET48XX LED SUPPORT
+P:	Chris Boot
+M:	bootc@bootc.net
+S:	Maintained
+
 SPARC (sparc32):
 P:	William L. Irwin
 M:	wli@holomorphy.com
@@ -2738,11 +2762,23 @@
 M:	hch@infradead.org
 S:	Maintained
 
+TC CLASSIFIER
+P:	Jamal Hadi Salim
+M:	hadi@cyberus.ca
+L:	netdev@vger.kernel.org
+S:	Maintained
+
 TI OMAP RANDOM NUMBER GENERATOR SUPPORT
 P:	Deepak Saxena
 M:	dsaxena@plexity.net
 S:	Maintained
 
+TASKSTATS STATISTICS INTERFACE
+P:	Shailabh Nagar
+M:	nagar@watson.ibm.com
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+
 TI PARALLEL LINK CABLE DRIVER
 P:     Romain Lievin
 M:     roms@lpg.ticalc.org
@@ -3118,7 +3154,7 @@
 VIAPRO SMBUS DRIVER
 P:	Jean Delvare
 M:	khali@linux-fr.org
-L:	lm-sensors@lm-sensors.org
+L:	i2c@lm-sensors.org
 S:	Maintained
 
 UCLINUX (AND M68KNOMMU)
@@ -3166,6 +3202,11 @@
 W1 DALLAS'S 1-WIRE BUS
 P:	Evgeniy Polyakov
 M:	johnpol@2ka.mipt.ru
+S:	Maintained
+
+W83791D HARDWARE MONITORING DRIVER
+P:	Charles Spirakis
+M:	bezaur@gmail.com
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 
diff -urN linux-2.6.18-rc1/Makefile linux-2.6.18-rc2/Makefile
--- linux-2.6.18-rc1/Makefile	2006-07-15 22:34:41.392868911 +0000
+++ linux-2.6.18-rc2/Makefile	2006-07-15 22:34:46.505423870 +0000
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 18
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME=Crazed Snow-Weasel
 
 # *DOCUMENTATION*
diff -urN linux-2.6.18-rc1/arch/alpha/kernel/alpha_ksyms.c linux-2.6.18-rc2/arch/alpha/kernel/alpha_ksyms.c
--- linux-2.6.18-rc1/arch/alpha/kernel/alpha_ksyms.c	2006-07-15 22:34:41.392868911 +0000
+++ linux-2.6.18-rc2/arch/alpha/kernel/alpha_ksyms.c	2006-07-15 22:34:46.509424305 +0000
@@ -14,6 +14,7 @@
 #include <linux/in.h>
 #include <linux/in6.h>
 #include <linux/pci.h>
+#include <linux/screen_info.h>
 #include <linux/tty.h>
 #include <linux/mm.h>
 #include <linux/delay.h>
diff -urN linux-2.6.18-rc1/arch/alpha/kernel/process.c linux-2.6.18-rc2/arch/alpha/kernel/process.c
--- linux-2.6.18-rc1/arch/alpha/kernel/process.c	2006-07-15 22:34:41.392868911 +0000
+++ linux-2.6.18-rc2/arch/alpha/kernel/process.c	2006-07-15 22:34:46.509424305 +0000
@@ -25,6 +25,7 @@
 #include <linux/time.h>
 #include <linux/major.h>
 #include <linux/stat.h>
+#include <linux/vt.h>
 #include <linux/mman.h>
 #include <linux/elfcore.h>
 #include <linux/reboot.h>
diff -urN linux-2.6.18-rc1/arch/alpha/kernel/setup.c linux-2.6.18-rc2/arch/alpha/kernel/setup.c
--- linux-2.6.18-rc1/arch/alpha/kernel/setup.c	2006-07-15 22:34:41.392868911 +0000
+++ linux-2.6.18-rc2/arch/alpha/kernel/setup.c	2006-07-15 22:34:46.509424305 +0000
@@ -19,7 +19,7 @@
 #include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/a.out.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/delay.h>
 #include <linux/config.h>	/* CONFIG_ALPHA_LCA etc */
 #include <linux/mc146818rtc.h>
diff -urN linux-2.6.18-rc1/arch/alpha/kernel/sys_sio.c linux-2.6.18-rc2/arch/alpha/kernel/sys_sio.c
--- linux-2.6.18-rc1/arch/alpha/kernel/sys_sio.c	2006-07-15 22:34:41.396869346 +0000
+++ linux-2.6.18-rc2/arch/alpha/kernel/sys_sio.c	2006-07-15 22:34:46.513424739 +0000
@@ -16,7 +16,7 @@
 #include <linux/sched.h>
 #include <linux/pci.h>
 #include <linux/init.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 
 #include <asm/compiler.h>
 #include <asm/ptrace.h>
diff -urN linux-2.6.18-rc1/arch/arm/common/locomo.c linux-2.6.18-rc2/arch/arm/common/locomo.c
--- linux-2.6.18-rc1/arch/arm/common/locomo.c	2006-07-15 22:34:41.404870214 +0000
+++ linux-2.6.18-rc2/arch/arm/common/locomo.c	2006-07-15 22:34:46.521425607 +0000
@@ -506,7 +506,7 @@
 		goto out;
 	}
 
-	strncpy(dev->dev.bus_id,info->name,sizeof(dev->dev.bus_id));
+	strncpy(dev->dev.bus_id, info->name, sizeof(dev->dev.bus_id));
 	/*
 	 * If the parent device has a DMA mask associated with it,
 	 * propagate it down to the children.
@@ -729,7 +729,6 @@
 
 	for (i = 0; i < ARRAY_SIZE(locomo_devices); i++)
 		locomo_init_one_child(lchip, &locomo_devices[i]);
-
 	return 0;
 
  out:
diff -urN linux-2.6.18-rc1/arch/arm/common/sharpsl_pm.c linux-2.6.18-rc2/arch/arm/common/sharpsl_pm.c
--- linux-2.6.18-rc1/arch/arm/common/sharpsl_pm.c	2006-07-15 22:34:41.404870214 +0000
+++ linux-2.6.18-rc2/arch/arm/common/sharpsl_pm.c	2006-07-15 22:34:46.521425607 +0000
@@ -412,8 +412,10 @@
 	val = get_select_val(buff);
 
 	dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
-	if (val > sharpsl_pm.machinfo->charge_on_temp)
+	if (val > sharpsl_pm.machinfo->charge_on_temp) {
+		printk(KERN_WARNING "Not charging: temperature out of limits.\n");
 		return -1;
+	}
 
 	return 0;
 }
diff -urN linux-2.6.18-rc1/arch/arm/configs/ep93xx_defconfig linux-2.6.18-rc2/arch/arm/configs/ep93xx_defconfig
--- linux-2.6.18-rc1/arch/arm/configs/ep93xx_defconfig	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/arm/configs/ep93xx_defconfig	2006-07-15 22:34:46.525426042 +0000
@@ -1,14 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Wed Apr 19 21:21:01 2006
+# Linux kernel version: 2.6.18-rc1
+# Sun Jul  9 15:21:30 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -43,14 +47,15 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -83,18 +88,26 @@
 #
 # System Type
 #
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 CONFIG_ARCH_EP93XX=y
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP3XX is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
@@ -102,20 +115,18 @@
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
 
 #
 # Cirrus EP93xx Implementation Options
 #
+CONFIG_CRUNCH=y
 
 #
 # EP93xx Platforms
 #
+CONFIG_MACH_EDB9302=y
+CONFIG_MACH_EDB9315=y
+CONFIG_MACH_EDB9315A=y
 CONFIG_MACH_GESBC9312=y
 CONFIG_MACH_TS72XX=y
 
@@ -166,6 +177,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -233,6 +245,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -240,6 +254,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -294,6 +309,7 @@
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -386,6 +402,8 @@
 #
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_TS7250=y
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
@@ -582,6 +600,7 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -613,6 +632,7 @@
 #
 # I2C Hardware Bus support
 #
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_STUB is not set
 # CONFIG_I2C_PCA_ISA is not set
@@ -641,13 +661,13 @@
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -675,8 +695,10 @@
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
@@ -704,6 +726,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -714,6 +737,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -806,6 +830,7 @@
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
@@ -833,6 +858,7 @@
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
 
 #
@@ -845,10 +871,12 @@
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
 
@@ -880,17 +908,24 @@
 CONFIG_RTC_INTF_SYSFS=y
 CONFIG_RTC_INTF_PROC=y
 CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
 
 #
 # RTC drivers
 #
 # CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
 CONFIG_RTC_DRV_M48T86=y
 CONFIG_RTC_DRV_EP93XX=y
+# CONFIG_RTC_DRV_PL031 is not set
 # CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
 # File systems
@@ -910,6 +945,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -957,6 +993,7 @@
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
 # CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -986,6 +1023,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1066,15 +1104,20 @@
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 CONFIG_DEBUG_SLAB=y
 # CONFIG_DEBUG_SLAB_LEAK is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
@@ -1114,3 +1157,4 @@
 CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/arm/configs/ixp2000_defconfig linux-2.6.18-rc2/arch/arm/configs/ixp2000_defconfig
--- linux-2.6.18-rc1/arch/arm/configs/ixp2000_defconfig	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/arm/configs/ixp2000_defconfig	2006-07-15 22:34:46.525426042 +0000
@@ -1,14 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Wed Apr 19 21:12:49 2006
+# Linux kernel version: 2.6.18-rc1
+# Sun Jul  9 15:28:50 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -43,14 +47,15 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -83,18 +88,26 @@
 #
 # System Type
 #
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP3XX is not set
 # CONFIG_ARCH_IXP4XX is not set
 CONFIG_ARCH_IXP2000=y
 # CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
@@ -102,12 +115,6 @@
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
 
 #
@@ -171,6 +178,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -218,6 +226,8 @@
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -236,6 +246,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -243,6 +255,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -297,6 +310,7 @@
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -525,6 +539,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -542,7 +557,6 @@
 CONFIG_WAN=y
 # CONFIG_DSCC4 is not set
 # CONFIG_LANMEDIA is not set
-# CONFIG_SYNCLINK_SYNCPPP is not set
 CONFIG_HDLC=y
 CONFIG_HDLC_RAW=y
 # CONFIG_HDLC_RAW_ETH is not set
@@ -654,6 +668,7 @@
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -697,6 +712,7 @@
 # CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
@@ -733,13 +749,13 @@
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -768,10 +784,12 @@
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
@@ -799,6 +817,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -808,6 +827,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -866,6 +886,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -910,6 +931,7 @@
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
 # CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -939,6 +961,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -980,14 +1003,19 @@
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
@@ -1027,3 +1055,4 @@
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/arm/configs/ixp23xx_defconfig linux-2.6.18-rc2/arch/arm/configs/ixp23xx_defconfig
--- linux-2.6.18-rc1/arch/arm/configs/ixp23xx_defconfig	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/arm/configs/ixp23xx_defconfig	2006-07-15 22:34:46.525426042 +0000
@@ -1,14 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Wed Apr 19 21:13:50 2006
+# Linux kernel version: 2.6.18-rc1
+# Sun Jul  9 14:13:35 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -43,14 +47,15 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -83,18 +88,26 @@
 #
 # System Type
 #
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP3XX is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
 CONFIG_ARCH_IXP23XX=y
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
@@ -102,12 +115,6 @@
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
 
 #
@@ -165,6 +172,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_RESOURCES_64BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -212,6 +220,8 @@
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -230,6 +240,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -237,6 +249,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -291,6 +304,7 @@
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -520,6 +534,7 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -641,6 +656,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -658,7 +674,6 @@
 CONFIG_WAN=y
 # CONFIG_DSCC4 is not set
 # CONFIG_LANMEDIA is not set
-# CONFIG_SYNCLINK_SYNCPPP is not set
 CONFIG_HDLC=y
 CONFIG_HDLC_RAW=y
 # CONFIG_HDLC_RAW_ETH is not set
@@ -775,6 +790,7 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -817,6 +833,7 @@
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
@@ -853,13 +870,13 @@
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -888,10 +905,12 @@
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
@@ -919,6 +938,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -929,6 +949,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -959,6 +980,7 @@
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
@@ -1050,10 +1072,12 @@
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 
@@ -1100,6 +1124,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -1146,6 +1171,7 @@
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
 # CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -1175,6 +1201,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1255,14 +1282,19 @@
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
@@ -1302,3 +1334,4 @@
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/arm/configs/lpd270_defconfig linux-2.6.18-rc2/arch/arm/configs/lpd270_defconfig
--- linux-2.6.18-rc1/arch/arm/configs/lpd270_defconfig	2006-07-15 22:34:41.408870648 +0000
+++ linux-2.6.18-rc2/arch/arm/configs/lpd270_defconfig	2006-07-15 22:34:46.529426476 +0000
@@ -1,15 +1,19 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-git2
-# Wed Jun 21 22:20:18 2006
+# Linux kernel version: 2.6.18-rc1
+# Sun Jul  9 14:15:23 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -43,10 +47,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -85,7 +91,7 @@
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
@@ -117,6 +123,7 @@
 # CONFIG_MACH_MAINSTONE is not set
 # CONFIG_ARCH_PXA_IDP is not set
 # CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
 CONFIG_PXA27x=y
 CONFIG_IWMMXT=y
 
@@ -161,6 +168,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -194,8 +202,6 @@
 # Power management options
 #
 # CONFIG_PM is not set
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
 # CONFIG_APM is not set
 
 #
@@ -293,6 +299,7 @@
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -561,6 +568,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -588,6 +596,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -617,13 +626,13 @@
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
@@ -658,12 +667,13 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_S1D13XXX is not set
@@ -822,6 +832,7 @@
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
 # CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -849,6 +860,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -914,14 +926,19 @@
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
@@ -961,3 +978,4 @@
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/arm/configs/onearm_defconfig linux-2.6.18-rc2/arch/arm/configs/onearm_defconfig
--- linux-2.6.18-rc1/arch/arm/configs/onearm_defconfig	2006-07-15 22:34:41.412871083 +0000
+++ linux-2.6.18-rc2/arch/arm/configs/onearm_defconfig	2006-07-15 22:34:46.533426910 +0000
@@ -1,14 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-git10
-# Mon Jun 26 13:45:44 2006
+# Linux kernel version: 2.6.18-rc1
+# Sun Jul  9 14:16:20 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -42,10 +46,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -86,7 +92,6 @@
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
@@ -111,8 +116,15 @@
 # CONFIG_ARCH_OMAP is not set
 
 #
-# AT91RM9200 Implementations
+# Atmel AT91 System-on-Chip
+#
+
 #
+# Atmel AT91 Processors
+#
+CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
 
 #
 # AT91RM9200 Board Type
@@ -123,12 +135,12 @@
 # CONFIG_MACH_CSB337 is not set
 # CONFIG_MACH_CSB637 is not set
 # CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_KB9200 is not set
 # CONFIG_MACH_ATEB9200 is not set
+# CONFIG_MACH_KB9200 is not set
 # CONFIG_MACH_KAFA is not set
 
 #
-# AT91RM9200 Feature Selections
+# AT91 Feature Selections
 #
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 
@@ -186,6 +198,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y
 # CONFIG_LEDS_CPU is not set
@@ -600,6 +613,7 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -743,6 +757,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -980,6 +995,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1006,14 +1022,19 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
@@ -1052,3 +1073,4 @@
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/arm/kernel/bios32.c linux-2.6.18-rc2/arch/arm/kernel/bios32.c
--- linux-2.6.18-rc1/arch/arm/kernel/bios32.c	2006-07-15 22:34:41.416871517 +0000
+++ linux-2.6.18-rc2/arch/arm/kernel/bios32.c	2006-07-15 22:34:46.537427344 +0000
@@ -370,17 +370,6 @@
 			features &= ~(PCI_COMMAND_SERR | PCI_COMMAND_PARITY);
 
 		switch (dev->class >> 8) {
-#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
-		case PCI_CLASS_BRIDGE_ISA:
-		case PCI_CLASS_BRIDGE_EISA:
-			/*
-			 * If this device is an ISA bridge, set isa_bridge
-			 * to point at this device.  We will then go looking
-			 * for things like keyboard, etc.
-			 */
-			isa_bridge = dev;
-			break;
-#endif
 		case PCI_CLASS_BRIDGE_PCI:
 			pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &status);
 			status |= PCI_BRIDGE_CTL_PARITY|PCI_BRIDGE_CTL_MASTER_ABORT;
diff -urN linux-2.6.18-rc1/arch/arm/kernel/irq.c linux-2.6.18-rc2/arch/arm/kernel/irq.c
--- linux-2.6.18-rc1/arch/arm/kernel/irq.c	2006-07-15 22:34:41.416871517 +0000
+++ linux-2.6.18-rc2/arch/arm/kernel/irq.c	2006-07-15 22:34:46.541427779 +0000
@@ -167,6 +167,16 @@
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
+
+static void route_irq(struct irqdesc *desc, unsigned int irq, unsigned int cpu)
+{
+	pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", irq, desc->cpu, cpu);
+
+	spin_lock_irq(&desc->lock);
+	desc->chip->set_affinity(irq, cpumask_of_cpu(cpu));
+	spin_unlock_irq(&desc->lock);
+}
+
 /*
  * The CPU has been marked offline.  Migrate IRQs off this CPU.  If
  * the affinity settings do not allow other CPUs, force them onto any
diff -urN linux-2.6.18-rc1/arch/arm/kernel/setup.c linux-2.6.18-rc2/arch/arm/kernel/setup.c
--- linux-2.6.18-rc1/arch/arm/kernel/setup.c	2006-07-15 22:34:41.420871951 +0000
+++ linux-2.6.18-rc2/arch/arm/kernel/setup.c	2006-07-15 22:34:46.541427779 +0000
@@ -17,7 +17,7 @@
 #include <linux/console.h>
 #include <linux/bootmem.h>
 #include <linux/seq_file.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/init.h>
 #include <linux/root_dev.h>
 #include <linux/cpu.h>
diff -urN linux-2.6.18-rc1/arch/arm/mach-sa1100/collie.c linux-2.6.18-rc2/arch/arm/mach-sa1100/collie.c
--- linux-2.6.18-rc1/arch/arm/mach-sa1100/collie.c	2006-07-15 22:34:41.468877162 +0000
+++ linux-2.6.18-rc2/arch/arm/mach-sa1100/collie.c	2006-07-15 22:34:46.597433858 +0000
@@ -83,8 +83,8 @@
 
 
 static struct mcp_plat_data collie_mcp_data = {
-	.mccr0          = MCCR0_ADM,
-	.sclk_rate      = 11981000,
+	.mccr0          = MCCR0_ADM | MCCR0_ExtClk,
+	.sclk_rate      = 9216000,
 };
 
 #ifdef CONFIG_SHARP_LOCOMO
diff -urN linux-2.6.18-rc1/arch/arm/mach-sa1100/collie_pm.c linux-2.6.18-rc2/arch/arm/mach-sa1100/collie_pm.c
--- linux-2.6.18-rc1/arch/arm/mach-sa1100/collie_pm.c	2006-07-15 22:34:41.468877162 +0000
+++ linux-2.6.18-rc2/arch/arm/mach-sa1100/collie_pm.c	2006-07-15 22:34:46.597433858 +0000
@@ -9,6 +9,9 @@
  * Li-ion batteries are angry beasts, and they like to explode. This driver is not finished,
  * and sometimes charges them when it should not. If it makes angry lithium to come your way...
  * ...well, you have been warned.
+ *
+ * Actually, this should be quite safe, it seems sharp leaves charger enabled by default,
+ * and my collie did not explode (yet).
  */
 
 #include <linux/module.h>
@@ -40,9 +43,8 @@
 {
 	int err;
 
-	if (sharpsl_param.adadj != -1) {
+	if (sharpsl_param.adadj != -1)
 		ad_revise = sharpsl_param.adadj;
-	}
 
 	/* Register interrupt handler. */
 	if ((err = request_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr, IRQF_DISABLED,
@@ -72,27 +74,17 @@
 
 static void collie_charge(int on)
 {
-	if (on) {
-		printk("Should start charger\n");
-	} else {
-		printk("Should stop charger\n");
-	}
-#ifdef I_AM_SURE
+	extern struct platform_device colliescoop_device;
 
-	/* Zaurus seems to contain LTC1731 ; it should know when to
+	/* Zaurus seems to contain LTC1731; it should know when to
 	 * stop charging itself, so setting charge on should be
 	 * relatively harmless (as long as it is not done too often).
 	 */
-#define CF_BUF_CTRL_BASE 0xF0800000
-#define        SCOOP_REG(adr) (*(volatile unsigned short*)(CF_BUF_CTRL_BASE+(adr)))
-#define        SCOOP_REG_GPWR    SCOOP_REG(SCOOP_GPWR)
-
 	if (on) {
 		set_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON);
 	} else {
 		reset_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON);
 	}
-#endif
 }
 
 static void collie_discharge(int on)
@@ -127,7 +119,6 @@
 
 	ucb1x00_adc_enable(ucb);
 
-	/* Gives 75..130 */
 	ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_BBAT_ON, 0);
 	voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC);
 
@@ -146,9 +137,8 @@
 	ucb1x00_adc_enable(ucb);
 	ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_BBAT_ON);
 	ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_MBAT_ON, 0);
-	/* gives values 160..255 with battery removed... and
-	   145..255 with battery inserted. (on AC), goes as low as
-	   80 on DC. */
+
+	mdelay(1);
 	voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC);
 
 	ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON);
@@ -192,7 +182,7 @@
 	case SHARPSL_BATT_TEMP:
 		return collie_read_temp();
 	case SHARPSL_ACIN_VOLT:
-		return 0x1;
+		return 500;
 	case SHARPSL_STATUS_ACIN: {
 		int ret = GPLR & COLLIE_GPIO_AC_IN;
 		printk("AC status = %d\n", ret);
@@ -208,10 +198,33 @@
 	}
 }
 
+struct battery_thresh collie_battery_levels_acin[] = {
+	{ 420, 100},
+	{ 417,  95},
+	{ 415,  90},
+	{ 413,  80},
+	{ 411,  75},
+	{ 408,  70},
+	{ 406,  60},
+	{ 403,  50},
+	{ 398,  40},
+	{ 391,  25},
+	{  10,   5},
+	{   0,   0},
+};
+
 struct battery_thresh collie_battery_levels[] = {
-	{ 368, 100},
-	{ 358,  25},
-	{ 356,   5},
+	{ 394, 100},
+	{ 390,  95},
+	{ 380,  90},
+	{ 370,  80},
+	{ 368,  75},	/* From sharp code: battery high with frontlight */
+	{ 366,  70},	/* 60..90 -- fake values invented by me for testing */
+	{ 364,  60},
+	{ 362,  50},
+	{ 360,  40},
+	{ 358,  25},	/* From sharp code: battery low with frontlight */
+	{ 356,   5},	/* From sharp code: battery verylow with frontlight */
 	{   0,   0},
 };
 
@@ -226,13 +239,21 @@
 	.postsuspend      = collie_postsuspend,
 	.charger_wakeup   = collie_charger_wakeup,
 	.should_wakeup    = collie_should_wakeup,
-	.bat_levels       = 3,
+	.bat_levels       = 12,
 	.bat_levels_noac  = collie_battery_levels,
-	.bat_levels_acin  = collie_battery_levels,
+	.bat_levels_acin  = collie_battery_levels_acin,
 	.status_high_acin = 368,
 	.status_low_acin  = 358,
 	.status_high_noac = 368,
 	.status_low_noac  = 358,
+	.charge_on_volt	  = 350,	/* spitz uses 2.90V, but lets play it safe. */
+	.charge_on_temp   = 550,
+	.charge_acin_high = 550,	/* collie does not seem to have sensor for this, anyway */
+	.charge_acin_low  = 450,	/* ignored, too */
+	.fatal_acin_volt  = 356,
+	.fatal_noacin_volt = 356,
+
+	.batfull_irq = 1,		/* We do not want periodical charge restarts */
 };
 
 static int __init collie_pm_ucb_add(struct ucb1x00_dev *pdev)
diff -urN linux-2.6.18-rc1/arch/arm/mach-versatile/core.c linux-2.6.18-rc2/arch/arm/mach-versatile/core.c
--- linux-2.6.18-rc1/arch/arm/mach-versatile/core.c	2006-07-15 22:34:41.472877596 +0000
+++ linux-2.6.18-rc2/arch/arm/mach-versatile/core.c	2006-07-15 22:34:46.601434292 +0000
@@ -35,6 +35,7 @@
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/icst307.h>
 #include <asm/hardware/vic.h>
+#include <asm/mach-types.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
@@ -352,11 +353,7 @@
 static void versatile_oscvco_set(struct clk *clk, struct icst307_vco vco)
 {
 	void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
-#if defined(CONFIG_ARCH_VERSATILE_PB)
-	void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC4_OFFSET;
-#elif defined(CONFIG_MACH_VERSATILE_AB)
-	void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC1_OFFSET;
-#endif
+	void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSCCLCD_OFFSET;
 	u32 val;
 
 	val = readl(sys_osc) & ~0x7ffff;
@@ -529,7 +526,7 @@
 	/*
 	 * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
 	 */
-	if (fb->panel == &sanyo_2_5_in) {
+	if (machine_is_versatile_ab() && fb->panel == &sanyo_2_5_in) {
 		void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
 		unsigned long ctrl;
 
@@ -578,7 +575,7 @@
 	/*
 	 * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
 	 */
-	if (fb->panel == &sanyo_2_5_in) {
+	if (machine_is_versatile_ab() && fb->panel == &sanyo_2_5_in) {
 		void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
 		unsigned long ctrl;
 
diff -urN linux-2.6.18-rc1/arch/arm/nwfpe/softfloat.h linux-2.6.18-rc2/arch/arm/nwfpe/softfloat.h
--- linux-2.6.18-rc1/arch/arm/nwfpe/softfloat.h	2006-07-15 22:34:41.480878465 +0000
+++ linux-2.6.18-rc2/arch/arm/nwfpe/softfloat.h	2006-07-15 22:34:46.613435595 +0000
@@ -61,7 +61,7 @@
     u16 __padding;
 #endif
     u64 low;
-} floatx80;
+}  __attribute__ ((packed,aligned(4))) floatx80;
 
 /*
 -------------------------------------------------------------------------------
diff -urN linux-2.6.18-rc1/arch/arm26/kernel/setup.c linux-2.6.18-rc2/arch/arm26/kernel/setup.c
--- linux-2.6.18-rc1/arch/arm26/kernel/setup.c	2006-07-15 22:34:41.488879333 +0000
+++ linux-2.6.18-rc2/arch/arm26/kernel/setup.c	2006-07-15 22:34:46.621436463 +0000
@@ -17,7 +17,7 @@
 #include <linux/console.h>
 #include <linux/bootmem.h>
 #include <linux/seq_file.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/init.h>
 #include <linux/root_dev.h>
 
diff -urN linux-2.6.18-rc1/arch/cris/arch-v10/drivers/eeprom.c linux-2.6.18-rc2/arch/cris/arch-v10/drivers/eeprom.c
--- linux-2.6.18-rc1/arch/cris/arch-v10/drivers/eeprom.c	2006-07-15 22:34:41.492879767 +0000
+++ linux-2.6.18-rc2/arch/cris/arch-v10/drivers/eeprom.c	2006-07-15 22:34:46.625436898 +0000
@@ -450,9 +450,9 @@
 static int eeprom_open(struct inode * inode, struct file * file)
 {
 
-  if(MINOR(inode->i_rdev) != EEPROM_MINOR_NR)
+  if(iminor(inode) != EEPROM_MINOR_NR)
      return -ENXIO;
-  if(MAJOR(inode->i_rdev) != EEPROM_MAJOR_NR)
+  if(imajor(inode) != EEPROM_MAJOR_NR)
      return -ENXIO;
 
   if( eeprom.size > 0 )
diff -urN linux-2.6.18-rc1/arch/cris/arch-v10/drivers/gpio.c linux-2.6.18-rc2/arch/cris/arch-v10/drivers/gpio.c
--- linux-2.6.18-rc1/arch/cris/arch-v10/drivers/gpio.c	2006-07-15 22:34:41.492879767 +0000
+++ linux-2.6.18-rc2/arch/cris/arch-v10/drivers/gpio.c	2006-07-15 22:34:46.629437332 +0000
@@ -435,7 +435,7 @@
 gpio_open(struct inode *inode, struct file *filp)
 {
 	struct gpio_private *priv;
-	int p = MINOR(inode->i_rdev);
+	int p = iminor(inode);
 
 	if (p > GPIO_MINOR_LAST)
 		return -EINVAL;
diff -urN linux-2.6.18-rc1/arch/cris/arch-v32/drivers/cryptocop.c linux-2.6.18-rc2/arch/cris/arch-v32/drivers/cryptocop.c
--- linux-2.6.18-rc1/arch/cris/arch-v32/drivers/cryptocop.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/cris/arch-v32/drivers/cryptocop.c	2006-07-15 22:34:46.633437766 +0000
@@ -2302,7 +2302,7 @@
 
 static int cryptocop_open(struct inode *inode, struct file *filp)
 {
-	int p = MINOR(inode->i_rdev);
+	int p = iminor(inode);
 
 	if (p != CRYPTOCOP_MINOR) return -EINVAL;
 
diff -urN linux-2.6.18-rc1/arch/cris/arch-v32/drivers/gpio.c linux-2.6.18-rc2/arch/cris/arch-v32/drivers/gpio.c
--- linux-2.6.18-rc1/arch/cris/arch-v32/drivers/gpio.c	2006-07-15 22:34:41.496880202 +0000
+++ linux-2.6.18-rc2/arch/cris/arch-v32/drivers/gpio.c	2006-07-15 22:34:46.633437766 +0000
@@ -418,7 +418,7 @@
 gpio_open(struct inode *inode, struct file *filp)
 {
 	struct gpio_private *priv;
-	int p = MINOR(inode->i_rdev);
+	int p = iminor(inode);
 
 	if (p > GPIO_MINOR_LAST)
 		return -EINVAL;
diff -urN linux-2.6.18-rc1/arch/cris/arch-v32/drivers/pcf8563.c linux-2.6.18-rc2/arch/cris/arch-v32/drivers/pcf8563.c
--- linux-2.6.18-rc1/arch/cris/arch-v32/drivers/pcf8563.c	2006-07-15 22:34:41.496880202 +0000
+++ linux-2.6.18-rc2/arch/cris/arch-v32/drivers/pcf8563.c	2006-07-15 22:34:46.633437766 +0000
@@ -324,14 +324,12 @@
 int
 pcf8563_open(struct inode *inode, struct file *filp)
 {
-	MOD_INC_USE_COUNT;
 	return 0;
 }
 
 int
 pcf8563_release(struct inode *inode, struct file *filp)
 {
-	MOD_DEC_USE_COUNT;
 	return 0;
 }
 
diff -urN linux-2.6.18-rc1/arch/cris/arch-v32/drivers/sync_serial.c linux-2.6.18-rc2/arch/cris/arch-v32/drivers/sync_serial.c
--- linux-2.6.18-rc1/arch/cris/arch-v32/drivers/sync_serial.c	2006-07-15 22:34:41.500880636 +0000
+++ linux-2.6.18-rc2/arch/cris/arch-v32/drivers/sync_serial.c	2006-07-15 22:34:46.633437766 +0000
@@ -340,7 +340,7 @@
 
 static int sync_serial_open(struct inode *inode, struct file *file)
 {
-	int dev = MINOR(inode->i_rdev);
+	int dev = iminor(inode);
 	sync_port* port;
 	reg_dma_rw_cfg cfg = {.en = regk_dma_yes};
 	reg_dma_rw_intr_mask intr_mask = {.data = regk_dma_yes};
@@ -486,7 +486,7 @@
 
 static int sync_serial_release(struct inode *inode, struct file *file)
 {
-	int dev = MINOR(inode->i_rdev);
+	int dev = iminor(inode);
 	sync_port* port;
 
 	if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled)
@@ -504,7 +504,7 @@
 
 static unsigned int sync_serial_poll(struct file *file, poll_table *wait)
 {
-	int dev = MINOR(file->f_dentry->d_inode->i_rdev);
+	int dev = iminor(file->f_dentry->d_inode);
 	unsigned int mask = 0;
 	sync_port* port;
 	DEBUGPOLL( static unsigned int prev_mask = 0; );
@@ -531,7 +531,7 @@
 		  unsigned int cmd, unsigned long arg)
 {
 	int return_val = 0;
-	int dev = MINOR(file->f_dentry->d_inode->i_rdev);
+	int dev = iminor(file->f_dentry->d_inode);
 	sync_port* port;
 	reg_sser_rw_tr_cfg tr_cfg;
 	reg_sser_rw_rec_cfg rec_cfg;
@@ -789,7 +789,7 @@
 static ssize_t sync_serial_write(struct file * file, const char * buf,
                                  size_t count, loff_t *ppos)
 {
-	int dev = MINOR(file->f_dentry->d_inode->i_rdev);
+	int dev = iminor(file->f_dentry->d_inode);
 	DECLARE_WAITQUEUE(wait, current);
 	sync_port *port;
 	unsigned long c, c1;
@@ -919,7 +919,7 @@
 static ssize_t sync_serial_read(struct file * file, char * buf,
 				size_t count, loff_t *ppos)
 {
-	int dev = MINOR(file->f_dentry->d_inode->i_rdev);
+	int dev = iminor(file->f_dentry->d_inode);
 	int avail;
 	sync_port *port;
 	unsigned char* start;
diff -urN linux-2.6.18-rc1/arch/cris/kernel/setup.c linux-2.6.18-rc2/arch/cris/kernel/setup.c
--- linux-2.6.18-rc1/arch/cris/kernel/setup.c	2006-07-15 22:34:41.500880636 +0000
+++ linux-2.6.18-rc2/arch/cris/kernel/setup.c	2006-07-15 22:34:46.637438200 +0000
@@ -15,7 +15,7 @@
 #include <linux/bootmem.h>
 #include <asm/pgtable.h>
 #include <linux/seq_file.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/utsname.h>
 #include <linux/pfn.h>
 
diff -urN linux-2.6.18-rc1/arch/frv/kernel/asm-offsets.c linux-2.6.18-rc2/arch/frv/kernel/asm-offsets.c
--- linux-2.6.18-rc1/arch/frv/kernel/asm-offsets.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/frv/kernel/asm-offsets.c	2006-07-15 22:34:46.637438200 +0000
@@ -1 +1,115 @@
-/* Dummy asm-offsets.c file. Required by kbuild and ready to be used - hint! */
+/*
+ * Generate definitions needed by assembly language modules.
+ * This code generates raw asm output which is post-processed
+ * to extract and format the required data.
+ */
+
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/personality.h>
+#include <asm/registers.h>
+#include <asm/ucontext.h>
+#include <asm/processor.h>
+#include <asm/thread_info.h>
+#include <asm/gdb-stub.h>
+
+#define DEFINE(sym, val) \
+        asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+
+#define DEF_PTREG(sym, reg) \
+        asm volatile("\n->" #sym " %0 offsetof(struct pt_regs, " #reg ")" \
+		     : : "i" (offsetof(struct pt_regs, reg)))
+
+#define DEF_IREG(sym, reg) \
+        asm volatile("\n->" #sym " %0 offsetof(struct user_context, " #reg ")" \
+		     : : "i" (offsetof(struct user_context, reg)))
+
+#define DEF_FREG(sym, reg) \
+        asm volatile("\n->" #sym " %0 offsetof(struct user_context, " #reg ")" \
+		     : : "i" (offsetof(struct user_context, reg)))
+
+#define DEF_0REG(sym, reg) \
+        asm volatile("\n->" #sym " %0 offsetof(struct frv_frame0, " #reg ")" \
+		     : : "i" (offsetof(struct frv_frame0, reg)))
+
+#define BLANK() asm volatile("\n->" : : )
+
+#define OFFSET(sym, str, mem) \
+	DEFINE(sym, offsetof(struct str, mem));
+
+void foo(void)
+{
+	/* offsets into the thread_info structure */
+	OFFSET(TI_TASK,			thread_info, task);
+	OFFSET(TI_EXEC_DOMAIN,		thread_info, exec_domain);
+	OFFSET(TI_FLAGS,		thread_info, flags);
+	OFFSET(TI_STATUS,		thread_info, status);
+	OFFSET(TI_CPU,			thread_info, cpu);
+	OFFSET(TI_PREEMPT_COUNT,	thread_info, preempt_count);
+	OFFSET(TI_ADDR_LIMIT,		thread_info, addr_limit);
+	OFFSET(TI_RESTART_BLOCK,	thread_info, restart_block);
+	BLANK();
+
+	/* offsets into register file storage */
+	DEF_PTREG(REG_PSR,		psr);
+	DEF_PTREG(REG_ISR,		isr);
+	DEF_PTREG(REG_CCR,		ccr);
+	DEF_PTREG(REG_CCCR,		cccr);
+	DEF_PTREG(REG_LR,		lr);
+	DEF_PTREG(REG_LCR,		lcr);
+	DEF_PTREG(REG_PC,		pc);
+	DEF_PTREG(REG__STATUS,		__status);
+	DEF_PTREG(REG_SYSCALLNO,	syscallno);
+	DEF_PTREG(REG_ORIG_GR8,		orig_gr8);
+	DEF_PTREG(REG_GNER0,		gner0);
+	DEF_PTREG(REG_GNER1,		gner1);
+	DEF_PTREG(REG_IACC0,		iacc0);
+	DEF_PTREG(REG_TBR,		tbr);
+	DEF_PTREG(REG_GR0,		tbr);
+	DEFINE(REG__END,		sizeof(struct pt_regs));
+	BLANK();
+
+	DEF_0REG(REG_DCR,		debug.dcr);
+	DEF_0REG(REG_IBAR0,		debug.ibar[0]);
+	DEF_0REG(REG_DBAR0,		debug.dbar[0]);
+	DEF_0REG(REG_DBDR00,		debug.dbdr[0][0]);
+	DEF_0REG(REG_DBMR00,		debug.dbmr[0][0]);
+	BLANK();
+
+	DEF_IREG(__INT_GR0,		i.gr[0]);
+	DEF_FREG(__USER_FPMEDIA,	f);
+	DEF_FREG(__FPMEDIA_FR0,		f.fr[0]);
+	DEF_FREG(__FPMEDIA_FNER0,	f.fner[0]);
+	DEF_FREG(__FPMEDIA_MSR0,	f.msr[0]);
+	DEF_FREG(__FPMEDIA_ACC0,	f.acc[0]);
+	DEF_FREG(__FPMEDIA_ACCG0,	f.accg[0]);
+	DEF_FREG(__FPMEDIA_FSR0,	f.fsr[0]);
+	BLANK();
+
+	DEFINE(NR_PT_REGS,		sizeof(struct pt_regs) / 4);
+	DEFINE(NR_USER_INT_REGS,	sizeof(struct user_int_regs) / 4);
+	DEFINE(NR_USER_FPMEDIA_REGS,	sizeof(struct user_fpmedia_regs) / 4);
+	DEFINE(NR_USER_CONTEXT,		sizeof(struct user_context) / 4);
+	DEFINE(FRV_FRAME0_SIZE,		sizeof(struct frv_frame0));
+	BLANK();
+
+	/* offsets into thread_struct */
+	OFFSET(__THREAD_FRAME,		thread_struct, frame);
+	OFFSET(__THREAD_CURR,		thread_struct, curr);
+	OFFSET(__THREAD_SP,		thread_struct, sp);
+	OFFSET(__THREAD_FP,		thread_struct, fp);
+	OFFSET(__THREAD_LR,		thread_struct, lr);
+	OFFSET(__THREAD_PC,		thread_struct, pc);
+	OFFSET(__THREAD_GR16,		thread_struct, gr[0]);
+	OFFSET(__THREAD_SCHED_LR,	thread_struct, sched_lr);
+	OFFSET(__THREAD_FRAME0,		thread_struct, frame0);
+	OFFSET(__THREAD_USER,		thread_struct, user);
+	BLANK();
+
+	/* offsets into frv_debug_status */
+	OFFSET(DEBUG_BPSR,		frv_debug_status, bpsr);
+	OFFSET(DEBUG_DCR,		frv_debug_status, dcr);
+	OFFSET(DEBUG_BRR,		frv_debug_status, brr);
+	OFFSET(DEBUG_NMAR,		frv_debug_status, nmar);
+	BLANK();
+}
diff -urN linux-2.6.18-rc1/arch/frv/kernel/break.S linux-2.6.18-rc2/arch/frv/kernel/break.S
--- linux-2.6.18-rc1/arch/frv/kernel/break.S	2006-07-15 22:34:41.504881070 +0000
+++ linux-2.6.18-rc2/arch/frv/kernel/break.S	2006-07-15 22:34:46.637438200 +0000
@@ -9,11 +9,11 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-#include <linux/sys.h>
 #include <linux/linkage.h>
 #include <asm/setup.h>
 #include <asm/segment.h>
 #include <asm/ptrace.h>
+#include <asm/thread_info.h>
 #include <asm/spr-regs.h>
 
 #include <asm/errno.h>
@@ -23,13 +23,11 @@
 #
 	.section	.bss.stack
 	.globl		__break_user_context
-	.balign		8192
+	.balign		THREAD_SIZE
 __break_stack:
-	.space		(8192 - (USER_CONTEXT_SIZE + REG__DEBUG_XTRA)) & ~7
-__break_stack_tos:
-	.space		REG__DEBUG_XTRA
-__break_user_context:
-	.space		USER_CONTEXT_SIZE
+	.space		THREAD_SIZE - FRV_FRAME0_SIZE
+__break_frame_0:
+	.space		FRV_FRAME0_SIZE
 
 #
 # miscellaneous variables
@@ -74,8 +72,8 @@
 #endif
 	LEDS		0x1001,gr31
 
-	sethi.p		%hi(__break_user_context),gr31
-	setlo		%lo(__break_user_context),gr31
+	sethi.p		%hi(__break_frame_0),gr31
+	setlo		%lo(__break_frame_0),gr31
 
 	stdi		gr2,@(gr31,#REG_GR(2))
 	movsg		ccr,gr3
@@ -585,8 +583,8 @@
 	# set up the kernel stack pointer
 	sti		sp,@(gr31,#REG_SP)
 
-	sethi.p		%hi(__break_stack_tos),sp
-	setlo		%lo(__break_stack_tos),sp
+	sethi.p		%hi(__break_frame_0),sp
+	setlo		%lo(__break_frame_0),sp
 
 	# finish building the exception frame
 	stdi		gr4 ,@(gr31,#REG_GR(4))
@@ -651,9 +649,12 @@
 	movsg		nmar,gr5
 	movsg		dcr,gr6
 
-	stdi		gr4 ,@(gr31,#REG_BRR)
-	sti		gr19,@(gr31,#REG_BPSR)
-	sti.p		gr6 ,@(gr31,#REG_DCR)
+	sethi.p		%hi(__debug_status),gr7
+	setlo		%lo(__debug_status),gr7
+
+	stdi		gr4 ,@(gr7,#DEBUG_BRR)
+	sti		gr19,@(gr7,#DEBUG_BPSR)
+	sti.p		gr6 ,@(gr7,#DEBUG_DCR)
 
 	# trap exceptions during break handling and disable h/w breakpoints/watchpoints
 	sethi		%hi(DCR_EBE),gr5
@@ -698,7 +699,10 @@
 	lddi		@(gr31,#REG_PSR) ,gr22
 	ldi		@(gr31,#REG_PC)  ,gr21
 	ldi		@(gr31,#REG_TBR) ,gr20
-	ldi.p		@(gr31,#REG_DCR) ,gr6
+
+	sethi.p		%hi(__debug_status),gr6
+	setlo		%lo(__debug_status),gr6
+	ldi.p		@(gr6,#DEBUG_DCR) ,gr6
 
 	andi		gr22,#PSR_S,gr19		/* rebuild BPSR */
 	andi.p		gr22,#PSR_ET,gr5
diff -urN linux-2.6.18-rc1/arch/frv/kernel/debug-stub.c linux-2.6.18-rc2/arch/frv/kernel/debug-stub.c
--- linux-2.6.18-rc1/arch/frv/kernel/debug-stub.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/frv/kernel/debug-stub.c	2006-07-15 22:34:46.641438634 +0000
@@ -39,10 +39,9 @@
 	gdbstub_do_rx();			\
 } while(!FLOWCTL_QUERY(LINE))
 
-static void __init debug_stub_init(void);
+struct frv_debug_status __debug_status;
 
-extern asmlinkage void __break_hijack_kernel_event(void);
-extern asmlinkage void __break_hijack_kernel_event_breaks_here(void);
+static void __init debug_stub_init(void);
 
 /*****************************************************************************/
 /*
@@ -67,7 +66,7 @@
 		__set_HSR(0, hsr0 & ~HSR0_ETMD);
 
 	/* disable single stepping */
-	__debug_regs->dcr &= ~DCR_SE;
+	__debug_status.dcr &= ~DCR_SE;
 
 	/* kernel mode can propose an exception be handled in debug mode by jumping to a special
 	 * location */
@@ -76,8 +75,8 @@
 		 * the top kernel context */
 		*__debug_frame = *__frame;
 		__frame = __debug_frame->next_frame;
-		__debug_regs->brr = (__debug_frame->tbr & TBR_TT) << 12;
-		__debug_regs->brr |= BRR_EB;
+		__debug_status.brr = (__debug_frame->tbr & TBR_TT) << 12;
+		__debug_status.brr |= BRR_EB;
 	}
 
 	if (__debug_frame->pc == (unsigned long) __debug_bug_trap + 4) {
@@ -124,7 +123,7 @@
 		__debug_frame->pc = (unsigned long) start_kernel;
 
 	/* enable the debug events we want to trap */
-	__debug_regs->dcr = DCR_EBE;
+	__debug_status.dcr = DCR_EBE;
 
 #ifdef CONFIG_GDBSTUB
 	gdbstub_init();
diff -urN linux-2.6.18-rc1/arch/frv/kernel/entry.S linux-2.6.18-rc2/arch/frv/kernel/entry.S
--- linux-2.6.18-rc1/arch/frv/kernel/entry.S	2006-07-15 22:34:41.504881070 +0000
+++ linux-2.6.18-rc2/arch/frv/kernel/entry.S	2006-07-15 22:34:46.641438634 +0000
@@ -27,7 +27,6 @@
  *
  */
 
-#include <linux/sys.h>
 #include <linux/linkage.h>
 #include <asm/thread_info.h>
 #include <asm/setup.h>
diff -urN linux-2.6.18-rc1/arch/frv/kernel/gdb-stub.c linux-2.6.18-rc2/arch/frv/kernel/gdb-stub.c
--- linux-2.6.18-rc1/arch/frv/kernel/gdb-stub.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/frv/kernel/gdb-stub.c	2006-07-15 22:34:46.641438634 +0000
@@ -124,6 +124,7 @@
 #include <linux/slab.h>
 #include <linux/nmi.h>
 
+#include <asm/asm-offsets.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
 #include <asm/gdb-stub.h>
@@ -136,7 +137,6 @@
 extern void gdbstub_console_write(struct console *co, const char *p, unsigned n);
 
 extern volatile uint32_t __break_error_detect[3]; /* ESFR1, ESR15, EAR15 */
-extern struct user_context __break_user_context;
 
 struct __debug_amr {
 	unsigned long L, P;
@@ -926,6 +926,7 @@
 		if (!(__debug_regs->dcr & DCR_IBE0)) {
 			//gdbstub_printk("set h/w break 0: %08lx\n", addr);
 			__debug_regs->dcr |= DCR_IBE0;
+			__debug_regs->ibar[0] = addr;
 			asm volatile("movgs %0,ibar0" : : "r"(addr));
 			return 0;
 		}
@@ -933,6 +934,7 @@
 		if (!(__debug_regs->dcr & DCR_IBE1)) {
 			//gdbstub_printk("set h/w break 1: %08lx\n", addr);
 			__debug_regs->dcr |= DCR_IBE1;
+			__debug_regs->ibar[1] = addr;
 			asm volatile("movgs %0,ibar1" : : "r"(addr));
 			return 0;
 		}
@@ -940,6 +942,7 @@
 		if (!(__debug_regs->dcr & DCR_IBE2)) {
 			//gdbstub_printk("set h/w break 2: %08lx\n", addr);
 			__debug_regs->dcr |= DCR_IBE2;
+			__debug_regs->ibar[2] = addr;
 			asm volatile("movgs %0,ibar2" : : "r"(addr));
 			return 0;
 		}
@@ -947,6 +950,7 @@
 		if (!(__debug_regs->dcr & DCR_IBE3)) {
 			//gdbstub_printk("set h/w break 3: %08lx\n", addr);
 			__debug_regs->dcr |= DCR_IBE3;
+			__debug_regs->ibar[3] = addr;
 			asm volatile("movgs %0,ibar3" : : "r"(addr));
 			return 0;
 		}
@@ -971,7 +975,14 @@
 		if (!(__debug_regs->dcr & (DCR_DRBE0|DCR_DWBE0))) {
 			//gdbstub_printk("set h/w watchpoint 0 type %ld: %08lx\n", type, addr);
 			tmp = type==2 ? DCR_DWBE0 : type==3 ? DCR_DRBE0 : DCR_DRBE0|DCR_DWBE0;
+
 			__debug_regs->dcr |= tmp;
+			__debug_regs->dbar[0] = addr;
+			__debug_regs->dbmr[0][0] = dbmr.mask0;
+			__debug_regs->dbmr[0][1] = dbmr.mask1;
+			__debug_regs->dbdr[0][0] = 0;
+			__debug_regs->dbdr[0][1] = 0;
+
 			asm volatile("	movgs	%0,dbar0	\n"
 				     "	movgs	%1,dbmr00	\n"
 				     "	movgs	%2,dbmr01	\n"
@@ -984,7 +995,14 @@
 		if (!(__debug_regs->dcr & (DCR_DRBE1|DCR_DWBE1))) {
 			//gdbstub_printk("set h/w watchpoint 1 type %ld: %08lx\n", type, addr);
 			tmp = type==2 ? DCR_DWBE1 : type==3 ? DCR_DRBE1 : DCR_DRBE1|DCR_DWBE1;
+
 			__debug_regs->dcr |= tmp;
+			__debug_regs->dbar[1] = addr;
+			__debug_regs->dbmr[1][0] = dbmr.mask0;
+			__debug_regs->dbmr[1][1] = dbmr.mask1;
+			__debug_regs->dbdr[1][0] = 0;
+			__debug_regs->dbdr[1][1] = 0;
+
 			asm volatile("	movgs	%0,dbar1	\n"
 				     "	movgs	%1,dbmr10	\n"
 				     "	movgs	%2,dbmr11	\n"
@@ -1047,6 +1065,7 @@
 		if (__debug_regs->dcr & DCR_IBE0 && __get_ibar(0) == addr) {
 			//gdbstub_printk("clear h/w break 0: %08lx\n", addr);
 			__debug_regs->dcr &= ~DCR_IBE0;
+			__debug_regs->ibar[0] = 0;
 			asm volatile("movgs gr0,ibar0");
 			return 0;
 		}
@@ -1054,6 +1073,7 @@
 		if (__debug_regs->dcr & DCR_IBE1 && __get_ibar(1) == addr) {
 			//gdbstub_printk("clear h/w break 1: %08lx\n", addr);
 			__debug_regs->dcr &= ~DCR_IBE1;
+			__debug_regs->ibar[1] = 0;
 			asm volatile("movgs gr0,ibar1");
 			return 0;
 		}
@@ -1061,6 +1081,7 @@
 		if (__debug_regs->dcr & DCR_IBE2 && __get_ibar(2) == addr) {
 			//gdbstub_printk("clear h/w break 2: %08lx\n", addr);
 			__debug_regs->dcr &= ~DCR_IBE2;
+			__debug_regs->ibar[2] = 0;
 			asm volatile("movgs gr0,ibar2");
 			return 0;
 		}
@@ -1068,6 +1089,7 @@
 		if (__debug_regs->dcr & DCR_IBE3 && __get_ibar(3) == addr) {
 			//gdbstub_printk("clear h/w break 3: %08lx\n", addr);
 			__debug_regs->dcr &= ~DCR_IBE3;
+			__debug_regs->ibar[3] = 0;
 			asm volatile("movgs gr0,ibar3");
 			return 0;
 		}
@@ -1104,6 +1126,12 @@
 
 		//gdbstub_printk("clear h/w watchpoint 0 type %ld: %08lx\n", type, addr);
 		__debug_regs->dcr &= ~(DCR_DRBE0|DCR_DWBE0);
+		__debug_regs->dbar[0] = 0;
+		__debug_regs->dbmr[0][0] = 0;
+		__debug_regs->dbmr[0][1] = 0;
+		__debug_regs->dbdr[0][0] = 0;
+		__debug_regs->dbdr[0][1] = 0;
+
 		asm volatile("	movgs	gr0,dbar0	\n"
 			     "	movgs	gr0,dbmr00	\n"
 			     "	movgs	gr0,dbmr01	\n"
@@ -1123,6 +1151,12 @@
 
 		//gdbstub_printk("clear h/w watchpoint 1 type %ld: %08lx\n", type, addr);
 		__debug_regs->dcr &= ~(DCR_DRBE1|DCR_DWBE1);
+		__debug_regs->dbar[1] = 0;
+		__debug_regs->dbmr[1][0] = 0;
+		__debug_regs->dbmr[1][1] = 0;
+		__debug_regs->dbdr[1][0] = 0;
+		__debug_regs->dbdr[1][1] = 0;
+
 		asm volatile("	movgs	gr0,dbar1	\n"
 			     "	movgs	gr0,dbmr10	\n"
 			     "	movgs	gr0,dbmr11	\n"
@@ -1163,7 +1197,7 @@
  */
 static void __attribute__((unused)) gdbstub_show_regs(void)
 {
-	uint32_t *reg;
+	unsigned long *reg;
 	int loop;
 
 	gdbstub_printk("\n");
@@ -1172,11 +1206,11 @@
 		       __debug_frame,
 		       __debug_frame->psr & PSR_S ? "kernel" : "user");
 
-	reg = (uint32_t *) __debug_frame;
-	for (loop = 0; loop < REG__END; loop++) {
-		printk("%s %08x", regnames[loop + 0], reg[loop + 0]);
+	reg = (unsigned long *) __debug_frame;
+	for (loop = 0; loop < NR_PT_REGS; loop++) {
+		printk("%s %08lx", regnames[loop + 0], reg[loop + 0]);
 
-		if (loop == REG__END - 1 || loop % 5 == 4)
+		if (loop == NR_PT_REGS - 1 || loop % 5 == 4)
 			printk("\n");
 		else
 			printk(" | ");
@@ -1191,13 +1225,8 @@
  */
 static void __attribute__((unused)) gdbstub_dump_debugregs(void)
 {
-	unsigned long x;
-
-	x = __debug_regs->dcr;
-	gdbstub_printk("DCR    %08lx  ", x);
-
-	x = __debug_regs->brr;
-	gdbstub_printk("BRR %08lx\n", x);
+	gdbstub_printk("DCR    %08lx  ", __debug_status.dcr);
+	gdbstub_printk("BRR    %08lx\n", __debug_status.brr);
 
 	gdbstub_printk("IBAR0  %08lx  ", __get_ibar(0));
 	gdbstub_printk("IBAR1  %08lx  ", __get_ibar(1));
@@ -1360,7 +1389,7 @@
 #endif
 	}
 
-	save_user_regs(&__break_user_context);
+	save_user_regs(&__debug_frame0->uc);
 
 #if 0
 	gdbstub_printk("--> gdbstub() %08x %p %08x %08x\n",
@@ -1389,8 +1418,8 @@
 		__debug_frame->psr &= ~PSR_S;
 		if (__debug_frame->psr & PSR_PS)
 			__debug_frame->psr |= PSR_S;
-		__debug_regs->brr = (__debug_frame->tbr & TBR_TT) << 12;
-		__debug_regs->brr |= BRR_EB;
+		__debug_status.brr = (__debug_frame->tbr & TBR_TT) << 12;
+		__debug_status.brr |= BRR_EB;
 		sigval = SIGINT;
 	}
 
@@ -1404,15 +1433,15 @@
 		__debug_frame->psr &= ~PSR_S;
 		if (__debug_frame->psr & PSR_PS)
 			__debug_frame->psr |= PSR_S;
-		__debug_regs->brr = (__debug_frame->tbr & TBR_TT) << 12;
-		__debug_regs->brr |= BRR_EB;
+		__debug_status.brr = (__debug_frame->tbr & TBR_TT) << 12;
+		__debug_status.brr |= BRR_EB;
 		sigval = SIGXCPU;
 	}
 
 	LEDS(0x5002);
 
 	/* after a BREAK insn, the PC lands on the far side of it */
-	if (__debug_regs->brr & BRR_SB)
+	if (__debug_status.brr & BRR_SB)
 		gdbstub_check_breakpoint();
 
 	LEDS(0x5003);
@@ -1431,7 +1460,7 @@
 	}
 
 	if (!sigval)
-		sigval = gdbstub_compute_signal(__debug_regs->brr);
+		sigval = gdbstub_compute_signal(__debug_status.brr);
 
 	LEDS(0x5004);
 
@@ -1441,7 +1470,7 @@
 	if (sigval != SIGINT && sigval != SIGTRAP && sigval != SIGILL) {
 		static const char title[] = "Break ";
 		static const char crlf[] = "\r\n";
-		unsigned long brr = __debug_regs->brr;
+		unsigned long brr = __debug_status.brr;
 		char hx;
 
 		ptr = output_buffer;
@@ -1565,28 +1594,24 @@
 			ptr = mem2hex(&zero, ptr, 4, 0);
 
 			for (loop = 1; loop <= 27; loop++)
-				ptr = mem2hex((unsigned long *)__debug_frame + REG_GR(loop),
-					      ptr, 4, 0);
+				ptr = mem2hex(&__debug_user_context->i.gr[loop], ptr, 4, 0);
 			temp = (unsigned long) __frame;
 			ptr = mem2hex(&temp, ptr, 4, 0);
-			ptr = mem2hex((unsigned long *)__debug_frame + REG_GR(29), ptr, 4, 0);
-			ptr = mem2hex((unsigned long *)__debug_frame + REG_GR(30), ptr, 4, 0);
+			ptr = mem2hex(&__debug_user_context->i.gr[29], ptr, 4, 0);
+			ptr = mem2hex(&__debug_user_context->i.gr[30], ptr, 4, 0);
 #ifdef CONFIG_MMU
-			ptr = mem2hex((unsigned long *)__debug_frame + REG_GR(31), ptr, 4, 0);
+			ptr = mem2hex(&__debug_user_context->i.gr[31], ptr, 4, 0);
 #else
 			temp = (unsigned long) __debug_frame;
 			ptr = mem2hex(&temp, ptr, 4, 0);
 #endif
 
 			for (loop = 32; loop <= 63; loop++)
-				ptr = mem2hex((unsigned long *)__debug_frame + REG_GR(loop),
-					      ptr, 4, 0);
+				ptr = mem2hex(&__debug_user_context->i.gr[loop], ptr, 4, 0);
 
 			/* deal with FR0-FR63 */
 			for (loop = 0; loop <= 63; loop++)
-				ptr = mem2hex((unsigned long *)&__break_user_context +
-					      __FPMEDIA_FR(loop),
-					      ptr, 4, 0);
+				ptr = mem2hex(&__debug_user_context->f.fr[loop], ptr, 4, 0);
 
 			/* deal with special registers */
 			ptr = mem2hex(&__debug_frame->pc,    ptr, 4, 0);
@@ -1597,7 +1622,7 @@
 			ptr = mem2hex(&zero, ptr, 4, 0);
 			ptr = mem2hex(&zero, ptr, 4, 0);
 			ptr = mem2hex(&__debug_frame->tbr,   ptr, 4, 0);
-			ptr = mem2hex(&__debug_regs->brr ,   ptr, 4, 0);
+			ptr = mem2hex(&__debug_status.brr ,   ptr, 4, 0);
 
 			asm volatile("movsg dbar0,%0" : "=r"(dbar));
 			ptr = mem2hex(&dbar, ptr, 4, 0);
@@ -1622,21 +1647,21 @@
 
 			ptr = mem2hex(&__debug_frame->iacc0, ptr, 8, 0);
 
-			ptr = mem2hex(&__break_user_context.f.fsr[0], ptr, 4, 0);
+			ptr = mem2hex(&__debug_user_context->f.fsr[0], ptr, 4, 0);
 
 			for (loop = 0; loop <= 7; loop++)
-				ptr = mem2hex(&__break_user_context.f.acc[loop], ptr, 4, 0);
+				ptr = mem2hex(&__debug_user_context->f.acc[loop], ptr, 4, 0);
 
-			ptr = mem2hex(&__break_user_context.f.accg, ptr, 8, 0);
+			ptr = mem2hex(&__debug_user_context->f.accg, ptr, 8, 0);
 
 			for (loop = 0; loop <= 1; loop++)
-				ptr = mem2hex(&__break_user_context.f.msr[loop], ptr, 4, 0);
+				ptr = mem2hex(&__debug_user_context->f.msr[loop], ptr, 4, 0);
 
 			ptr = mem2hex(&__debug_frame->gner0, ptr, 4, 0);
 			ptr = mem2hex(&__debug_frame->gner1, ptr, 4, 0);
 
-			ptr = mem2hex(&__break_user_context.f.fner[0], ptr, 4, 0);
-			ptr = mem2hex(&__break_user_context.f.fner[1], ptr, 4, 0);
+			ptr = mem2hex(&__debug_user_context->f.fner[0], ptr, 4, 0);
+			ptr = mem2hex(&__debug_user_context->f.fner[1], ptr, 4, 0);
 
 			break;
 
@@ -1648,8 +1673,7 @@
 			ptr = hex2mem(ptr, &temp, 4);
 
 			for (loop = 1; loop <= 27; loop++)
-				ptr = hex2mem(ptr, (unsigned long *)__debug_frame + REG_GR(loop),
-					      4);
+				ptr = hex2mem(ptr, &__debug_user_context->i.gr[loop], 4);
 
 			ptr = hex2mem(ptr, &temp, 4);
 			__frame = (struct pt_regs *) temp;
@@ -1662,14 +1686,11 @@
 #endif
 
 			for (loop = 32; loop <= 63; loop++)
-				ptr = hex2mem(ptr, (unsigned long *)__debug_frame + REG_GR(loop),
-					      4);
+				ptr = hex2mem(ptr, &__debug_user_context->i.gr[loop], 4);
 
 			/* deal with FR0-FR63 */
 			for (loop = 0; loop <= 63; loop++)
-				ptr = mem2hex((unsigned long *)&__break_user_context +
-					      __FPMEDIA_FR(loop),
-					      ptr, 4, 0);
+				ptr = mem2hex(&__debug_user_context->f.fr[loop], ptr, 4, 0);
 
 			/* deal with special registers */
 			ptr = hex2mem(ptr, &__debug_frame->pc,  4);
@@ -1694,21 +1715,21 @@
 
 			ptr = hex2mem(ptr, &__debug_frame->iacc0, 8);
 
-			ptr = hex2mem(ptr, &__break_user_context.f.fsr[0], 4);
+			ptr = hex2mem(ptr, &__debug_user_context->f.fsr[0], 4);
 
 			for (loop = 0; loop <= 7; loop++)
-				ptr = hex2mem(ptr, &__break_user_context.f.acc[loop], 4);
+				ptr = hex2mem(ptr, &__debug_user_context->f.acc[loop], 4);
 
-			ptr = hex2mem(ptr, &__break_user_context.f.accg, 8);
+			ptr = hex2mem(ptr, &__debug_user_context->f.accg, 8);
 
 			for (loop = 0; loop <= 1; loop++)
-				ptr = hex2mem(ptr, &__break_user_context.f.msr[loop], 4);
+				ptr = hex2mem(ptr, &__debug_user_context->f.msr[loop], 4);
 
 			ptr = hex2mem(ptr, &__debug_frame->gner0, 4);
 			ptr = hex2mem(ptr, &__debug_frame->gner1, 4);
 
-			ptr = hex2mem(ptr, &__break_user_context.f.fner[0], 4);
-			ptr = hex2mem(ptr, &__break_user_context.f.fner[1], 4);
+			ptr = hex2mem(ptr, &__debug_user_context->f.fner[0], 4);
+			ptr = hex2mem(ptr, &__debug_user_context->f.fner[1], 4);
 
 			gdbstub_strcpy(output_buffer,"OK");
 			break;
@@ -1769,52 +1790,52 @@
 			case GDB_REG_GR(0):
 				break;
 			case GDB_REG_GR(1) ... GDB_REG_GR(63):
-				__break_user_context.i.gr[addr - GDB_REG_GR(0)] = temp;
+				__debug_user_context->i.gr[addr - GDB_REG_GR(0)] = temp;
 				break;
 			case GDB_REG_FR(0) ... GDB_REG_FR(63):
-				__break_user_context.f.fr[addr - GDB_REG_FR(0)] = temp;
+				__debug_user_context->f.fr[addr - GDB_REG_FR(0)] = temp;
 				break;
 			case GDB_REG_PC:
-				__break_user_context.i.pc = temp;
+				__debug_user_context->i.pc = temp;
 				break;
 			case GDB_REG_PSR:
-				__break_user_context.i.psr = temp;
+				__debug_user_context->i.psr = temp;
 				break;
 			case GDB_REG_CCR:
-				__break_user_context.i.ccr = temp;
+				__debug_user_context->i.ccr = temp;
 				break;
 			case GDB_REG_CCCR:
-				__break_user_context.i.cccr = temp;
+				__debug_user_context->i.cccr = temp;
 				break;
 			case GDB_REG_BRR:
-				__debug_regs->brr = temp;
+				__debug_status.brr = temp;
 				break;
 			case GDB_REG_LR:
-				__break_user_context.i.lr = temp;
+				__debug_user_context->i.lr = temp;
 				break;
 			case GDB_REG_LCR:
-				__break_user_context.i.lcr = temp;
+				__debug_user_context->i.lcr = temp;
 				break;
 			case GDB_REG_FSR0:
-				__break_user_context.f.fsr[0] = temp;
+				__debug_user_context->f.fsr[0] = temp;
 				break;
 			case GDB_REG_ACC(0) ... GDB_REG_ACC(7):
-				__break_user_context.f.acc[addr - GDB_REG_ACC(0)] = temp;
+				__debug_user_context->f.acc[addr - GDB_REG_ACC(0)] = temp;
 				break;
 			case GDB_REG_ACCG(0):
-				*(uint32_t *) &__break_user_context.f.accg[0] = temp;
+				*(uint32_t *) &__debug_user_context->f.accg[0] = temp;
 				break;
 			case GDB_REG_ACCG(4):
-				*(uint32_t *) &__break_user_context.f.accg[4] = temp;
+				*(uint32_t *) &__debug_user_context->f.accg[4] = temp;
 				break;
 			case GDB_REG_MSR(0) ... GDB_REG_MSR(1):
-				__break_user_context.f.msr[addr - GDB_REG_MSR(0)] = temp;
+				__debug_user_context->f.msr[addr - GDB_REG_MSR(0)] = temp;
 				break;
 			case GDB_REG_GNER(0) ... GDB_REG_GNER(1):
-				__break_user_context.i.gner[addr - GDB_REG_GNER(0)] = temp;
+				__debug_user_context->i.gner[addr - GDB_REG_GNER(0)] = temp;
 				break;
 			case GDB_REG_FNER(0) ... GDB_REG_FNER(1):
-				__break_user_context.f.fner[addr - GDB_REG_FNER(0)] = temp;
+				__debug_user_context->f.fner[addr - GDB_REG_FNER(0)] = temp;
 				break;
 			default:
 				temp2 = 0;
@@ -1850,6 +1871,7 @@
 			/* step to next instruction */
 		case 's':
 			__debug_regs->dcr |= DCR_SE;
+			__debug_status.dcr |= DCR_SE;
 			goto done;
 
 			/* set baud rate (bBB) */
@@ -1934,7 +1956,7 @@
 	}
 
  done:
-	restore_user_regs(&__break_user_context);
+	restore_user_regs(&__debug_frame0->uc);
 
 	//gdbstub_dump_debugregs();
 	//gdbstub_printk("<-- gdbstub() %08x\n", __debug_frame->pc);
@@ -1966,7 +1988,6 @@
 #endif
 
 	gdbstub_printk("%s", gdbstub_banner);
-	gdbstub_printk("DCR: %x\n", __debug_regs->dcr);
 
 	gdbstub_io_init();
 
diff -urN linux-2.6.18-rc1/arch/frv/kernel/head.S linux-2.6.18-rc2/arch/frv/kernel/head.S
--- linux-2.6.18-rc1/arch/frv/kernel/head.S	2006-07-15 22:34:41.504881070 +0000
+++ linux-2.6.18-rc2/arch/frv/kernel/head.S	2006-07-15 22:34:46.645439069 +0000
@@ -11,6 +11,7 @@
 
 #include <linux/threads.h>
 #include <linux/linkage.h>
+#include <asm/thread_info.h>
 #include <asm/ptrace.h>
 #include <asm/page.h>
 #include <asm/spr-regs.h>
diff -urN linux-2.6.18-rc1/arch/frv/kernel/local.h linux-2.6.18-rc2/arch/frv/kernel/local.h
--- linux-2.6.18-rc1/arch/frv/kernel/local.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/frv/kernel/local.h	2006-07-15 22:34:46.645439069 +0000
@@ -51,6 +51,9 @@
 /* time.c */
 extern void time_divisor_init(void);
 
+/* cmode.S */
+extern asmlinkage void frv_change_cmode(int);
+
 
 #endif /* __ASSEMBLY__ */
 #endif /* _FRV_LOCAL_H */
diff -urN linux-2.6.18-rc1/arch/frv/kernel/pm.c linux-2.6.18-rc2/arch/frv/kernel/pm.c
--- linux-2.6.18-rc1/arch/frv/kernel/pm.c	2006-07-15 22:34:41.504881070 +0000
+++ linux-2.6.18-rc2/arch/frv/kernel/pm.c	2006-07-15 22:34:46.645439069 +0000
@@ -26,11 +26,6 @@
 
 #include "local.h"
 
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
-extern void frv_change_cmode(int);
-
 /*
  * Debug macros
  */
diff -urN linux-2.6.18-rc1/arch/frv/kernel/process.c linux-2.6.18-rc2/arch/frv/kernel/process.c
--- linux-2.6.18-rc1/arch/frv/kernel/process.c	2006-07-15 22:34:41.504881070 +0000
+++ linux-2.6.18-rc2/arch/frv/kernel/process.c	2006-07-15 22:34:46.645439069 +0000
@@ -10,6 +10,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#include <linux/module.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
@@ -25,6 +26,7 @@
 #include <linux/reboot.h>
 #include <linux/interrupt.h>
 
+#include <asm/asm-offsets.h>
 #include <asm/uaccess.h>
 #include <asm/system.h>
 #include <asm/setup.h>
@@ -38,6 +40,9 @@
 
 #include <asm/pgalloc.h>
 
+void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
+
 struct task_struct *alloc_task_struct(void)
 {
 	struct task_struct *p = kmalloc(THREAD_SIZE, GFP_KERNEL);
@@ -203,7 +208,7 @@
 
 	regs0 = __kernel_frame0_ptr;
 	childregs0 = (struct pt_regs *)
-		(task_stack_page(p) + THREAD_SIZE - USER_CONTEXT_SIZE);
+		(task_stack_page(p) + THREAD_SIZE - FRV_FRAME0_SIZE);
 	childregs = childregs0;
 
 	/* set up the userspace frame (the only place that the USP is stored) */
@@ -367,3 +372,11 @@
 
 	return 1;
 }
+
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpregs)
+{
+	memcpy(fpregs,
+	       &current->thread.user->f,
+	       sizeof(current->thread.user->f));
+	return 1;
+}
diff -urN linux-2.6.18-rc1/arch/frv/kernel/switch_to.S linux-2.6.18-rc2/arch/frv/kernel/switch_to.S
--- linux-2.6.18-rc1/arch/frv/kernel/switch_to.S	2006-07-15 22:34:41.508881504 +0000
+++ linux-2.6.18-rc2/arch/frv/kernel/switch_to.S	2006-07-15 22:34:46.649439503 +0000
@@ -11,6 +11,7 @@
 # 2 of the License, or (at your option) any later version.
 #
 ###############################################################################
+
 #include <linux/linkage.h>
 #include <asm/thread_info.h>
 #include <asm/processor.h>
@@ -30,7 +31,7 @@
 	# address of frame 0 (userspace) on current kernel stack
 	.globl		__kernel_frame0_ptr
 __kernel_frame0_ptr:
-	.long		init_thread_union + THREAD_SIZE - USER_CONTEXT_SIZE
+	.long		init_thread_union + THREAD_SIZE - FRV_FRAME0_SIZE
 
 	# address of current task
 	.globl		__kernel_current_task
diff -urN linux-2.6.18-rc1/arch/frv/kernel/traps.c linux-2.6.18-rc2/arch/frv/kernel/traps.c
--- linux-2.6.18-rc1/arch/frv/kernel/traps.c	2006-07-15 22:34:41.508881504 +0000
+++ linux-2.6.18-rc2/arch/frv/kernel/traps.c	2006-07-15 22:34:46.649439503 +0000
@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 
+#include <asm/asm-offsets.h>
 #include <asm/setup.h>
 #include <asm/fpu.h>
 #include <asm/system.h>
@@ -279,20 +280,20 @@
 
 void show_regs(struct pt_regs *regs)
 {
-	uint32_t *reg;
+	unsigned long *reg;
 	int loop;
 
 	printk("\n");
 
-	printk("Frame: @%08x [%s]\n",
-	       (uint32_t) regs,
+	printk("Frame: @%08lx [%s]\n",
+	       (unsigned long) regs,
 	       regs->psr & PSR_S ? "kernel" : "user");
 
-	reg = (uint32_t *) regs;
-	for (loop = 0; loop < REG__END; loop++) {
-		printk("%s %08x", regnames[loop + 0], reg[loop + 0]);
+	reg = (unsigned long *) regs;
+	for (loop = 0; loop < NR_PT_REGS; loop++) {
+		printk("%s %08lx", regnames[loop + 0], reg[loop + 0]);
 
-		if (loop == REG__END - 1 || loop % 5 == 4)
+		if (loop == NR_PT_REGS - 1 || loop % 5 == 4)
 			printk("\n");
 		else
 			printk(" | ");
@@ -328,7 +329,7 @@
  */
 static void show_backtrace_regs(struct pt_regs *frame)
 {
-	uint32_t *reg;
+	unsigned long *reg;
 	int loop;
 
 	/* print the registers for this frame */
@@ -336,11 +337,11 @@
 	       frame->psr & PSR_S ? "Kernel Mode" : "User Mode",
 	       frame);
 
-	reg = (uint32_t *) frame;
-	for (loop = 0; loop < REG__END; loop++) {
-		printk("%s %08x", regnames[loop + 0], reg[loop + 0]);
+	reg = (unsigned long *) frame;
+	for (loop = 0; loop < NR_PT_REGS; loop++) {
+		printk("%s %08lx", regnames[loop + 0], reg[loop + 0]);
 
-		if (loop == REG__END - 1 || loop % 5 == 4)
+		if (loop == NR_PT_REGS - 1 || loop % 5 == 4)
 			printk("\n");
 		else
 			printk(" | ");
diff -urN linux-2.6.18-rc1/arch/frv/mb93090-mb00/pci-vdk.c linux-2.6.18-rc2/arch/frv/mb93090-mb00/pci-vdk.c
--- linux-2.6.18-rc1/arch/frv/mb93090-mb00/pci-vdk.c	2006-07-15 22:34:41.508881504 +0000
+++ linux-2.6.18-rc2/arch/frv/mb93090-mb00/pci-vdk.c	2006-07-15 22:34:46.649439503 +0000
@@ -406,7 +406,9 @@
 	ioport_resource.end	= (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff;
 	ioport_resource.end	+= ioport_resource.start;
 
-	printk("PCI IO window:  %08lx-%08lx\n", ioport_resource.start, ioport_resource.end);
+	printk("PCI IO window:  %08llx-%08llx\n",
+	       (unsigned long long) ioport_resource.start,
+	       (unsigned long long) ioport_resource.end);
 
 	iomem_resource.start	= (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00;
 
@@ -416,8 +418,11 @@
 	iomem_resource.end	= (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff;
 	iomem_resource.end	+= iomem_resource.start;
 
-	printk("PCI MEM window: %08lx-%08lx\n", iomem_resource.start, iomem_resource.end);
-	printk("PCI DMA memory: %08lx-%08lx\n", dma_coherent_mem_start, dma_coherent_mem_end);
+	printk("PCI MEM window: %08llx-%08llx\n",
+	       (unsigned long long) iomem_resource.start,
+	       (unsigned long long) iomem_resource.end);
+	printk("PCI DMA memory: %08lx-%08lx\n",
+	       dma_coherent_mem_start, dma_coherent_mem_end);
 
 	if (!pci_probe)
 		return -ENXIO;
diff -urN linux-2.6.18-rc1/arch/i386/defconfig linux-2.6.18-rc2/arch/i386/defconfig
--- linux-2.6.18-rc1/arch/i386/defconfig	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/i386/defconfig	2006-07-15 22:34:46.657440371 +0000
@@ -197,7 +197,7 @@
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 CONFIG_SOFTWARE_SUSPEND=y
-CONFIG_PM_STD_PARTITION="/dev/hda2"
+CONFIG_PM_STD_PARTITION=""
 
 #
 # ACPI (Advanced Configuration and Power Interface) Support
diff -urN linux-2.6.18-rc1/arch/i386/kernel/crash.c linux-2.6.18-rc2/arch/i386/kernel/crash.c
--- linux-2.6.18-rc1/arch/i386/kernel/crash.c	2006-07-15 22:34:41.524883241 +0000
+++ linux-2.6.18-rc2/arch/i386/kernel/crash.c	2006-07-15 22:34:46.669441674 +0000
@@ -90,7 +90,7 @@
 	crash_save_this_cpu(regs, cpu);
 }
 
-#ifdef CONFIG_SMP
+#if defined(CONFIG_SMP) && defined(CONFIG_X86_LOCAL_APIC)
 static atomic_t waiting_for_crash_ipi;
 
 static int crash_nmi_callback(struct pt_regs *regs, int cpu)
diff -urN linux-2.6.18-rc1/arch/i386/kernel/ioport.c linux-2.6.18-rc2/arch/i386/kernel/ioport.c
--- linux-2.6.18-rc1/arch/i386/kernel/ioport.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/i386/kernel/ioport.c	2006-07-15 22:34:46.673442108 +0000
@@ -79,6 +79,7 @@
 
 		memset(bitmap, 0xff, IO_BITMAP_BYTES);
 		t->io_bitmap_ptr = bitmap;
+		set_thread_flag(TIF_IO_BITMAP);
 	}
 
 	/*
diff -urN linux-2.6.18-rc1/arch/i386/kernel/process.c linux-2.6.18-rc2/arch/i386/kernel/process.c
--- linux-2.6.18-rc1/arch/i386/kernel/process.c	2006-07-15 22:34:41.532884110 +0000
+++ linux-2.6.18-rc2/arch/i386/kernel/process.c	2006-07-15 22:34:46.677442543 +0000
@@ -359,16 +359,16 @@
  */
 void exit_thread(void)
 {
-	struct task_struct *tsk = current;
-	struct thread_struct *t = &tsk->thread;
-
 	/* The process may have allocated an io port bitmap... nuke it. */
-	if (unlikely(NULL != t->io_bitmap_ptr)) {
+	if (unlikely(test_thread_flag(TIF_IO_BITMAP))) {
+		struct task_struct *tsk = current;
+		struct thread_struct *t = &tsk->thread;
 		int cpu = get_cpu();
 		struct tss_struct *tss = &per_cpu(init_tss, cpu);
 
 		kfree(t->io_bitmap_ptr);
 		t->io_bitmap_ptr = NULL;
+		clear_thread_flag(TIF_IO_BITMAP);
 		/*
 		 * Careful, clear this in the TSS too:
 		 */
@@ -387,6 +387,7 @@
 
 	memset(tsk->thread.debugreg, 0, sizeof(unsigned long)*8);
 	memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));	
+	clear_tsk_thread_flag(tsk, TIF_DEBUG);
 	/*
 	 * Forget coprocessor state..
 	 */
@@ -431,7 +432,7 @@
 	savesegment(gs,p->thread.gs);
 
 	tsk = current;
-	if (unlikely(NULL != tsk->thread.io_bitmap_ptr)) {
+	if (unlikely(test_tsk_thread_flag(tsk, TIF_IO_BITMAP))) {
 		p->thread.io_bitmap_ptr = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL);
 		if (!p->thread.io_bitmap_ptr) {
 			p->thread.io_bitmap_max = 0;
@@ -439,6 +440,7 @@
 		}
 		memcpy(p->thread.io_bitmap_ptr, tsk->thread.io_bitmap_ptr,
 			IO_BITMAP_BYTES);
+		set_tsk_thread_flag(p, TIF_IO_BITMAP);
 	}
 
 	/*
@@ -533,10 +535,24 @@
 	return 1;
 }
 
-static inline void
-handle_io_bitmap(struct thread_struct *next, struct tss_struct *tss)
+static noinline void __switch_to_xtra(struct task_struct *next_p,
+				    struct tss_struct *tss)
 {
-	if (!next->io_bitmap_ptr) {
+	struct thread_struct *next;
+
+	next = &next_p->thread;
+
+	if (test_tsk_thread_flag(next_p, TIF_DEBUG)) {
+		set_debugreg(next->debugreg[0], 0);
+		set_debugreg(next->debugreg[1], 1);
+		set_debugreg(next->debugreg[2], 2);
+		set_debugreg(next->debugreg[3], 3);
+		/* no 4 and 5 */
+		set_debugreg(next->debugreg[6], 6);
+		set_debugreg(next->debugreg[7], 7);
+	}
+
+	if (!test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) {
 		/*
 		 * Disable the bitmap via an invalid offset. We still cache
 		 * the previous bitmap owner and the IO bitmap contents:
@@ -544,6 +560,7 @@
 		tss->io_bitmap_base = INVALID_IO_BITMAP_OFFSET;
 		return;
 	}
+
 	if (likely(next == tss->io_bitmap_owner)) {
 		/*
 		 * Previous owner of the bitmap (hence the bitmap content)
@@ -671,20 +688,11 @@
 		set_iopl_mask(next->iopl);
 
 	/*
-	 * Now maybe reload the debug registers
+	 * Now maybe handle debug registers and/or IO bitmaps
 	 */
-	if (unlikely(next->debugreg[7])) {
-		set_debugreg(next->debugreg[0], 0);
-		set_debugreg(next->debugreg[1], 1);
-		set_debugreg(next->debugreg[2], 2);
-		set_debugreg(next->debugreg[3], 3);
-		/* no 4 and 5 */
-		set_debugreg(next->debugreg[6], 6);
-		set_debugreg(next->debugreg[7], 7);
-	}
-
-	if (unlikely(prev->io_bitmap_ptr || next->io_bitmap_ptr))
-		handle_io_bitmap(next, tss);
+	if (unlikely((task_thread_info(next_p)->flags & _TIF_WORK_CTXSW))
+	    || test_tsk_thread_flag(prev_p, TIF_IO_BITMAP))
+		__switch_to_xtra(next_p, tss);
 
 	disable_tsc(prev_p, next_p);
 
diff -urN linux-2.6.18-rc1/arch/i386/kernel/ptrace.c linux-2.6.18-rc2/arch/i386/kernel/ptrace.c
--- linux-2.6.18-rc1/arch/i386/kernel/ptrace.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/i386/kernel/ptrace.c	2006-07-15 22:34:46.677442543 +0000
@@ -468,8 +468,11 @@
 				  for(i=0; i<4; i++)
 					  if ((0x5f54 >> ((data >> (16 + 4*i)) & 0xf)) & 1)
 						  goto out_tsk;
+				  if (data)
+					  set_tsk_thread_flag(child, TIF_DEBUG);
+				  else
+					  clear_tsk_thread_flag(child, TIF_DEBUG);
 			  }
-
 			  addr -= (long) &dummy->u_debugreg;
 			  addr = addr >> 2;
 			  child->thread.debugreg[addr] = data;
diff -urN linux-2.6.18-rc1/arch/i386/kernel/setup.c linux-2.6.18-rc2/arch/i386/kernel/setup.c
--- linux-2.6.18-rc1/arch/i386/kernel/setup.c	2006-07-15 22:34:41.532884110 +0000
+++ linux-2.6.18-rc2/arch/i386/kernel/setup.c	2006-07-15 22:34:46.677442543 +0000
@@ -26,7 +26,7 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/mmzone.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/ioport.h>
 #include <linux/acpi.h>
 #include <linux/apm_bios.h>
@@ -1327,7 +1327,10 @@
 		res->start = e820.map[i].addr;
 		res->end = res->start + e820.map[i].size - 1;
 		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-		request_resource(&iomem_resource, res);
+		if (request_resource(&iomem_resource, res)) {
+			kfree(res);
+			continue;
+		}
 		if (e820.map[i].type == E820_RAM) {
 			/*
 			 *  We don't know which RAM region contains kernel data,
diff -urN linux-2.6.18-rc1/arch/i386/kernel/time.c linux-2.6.18-rc2/arch/i386/kernel/time.c
--- linux-2.6.18-rc1/arch/i386/kernel/time.c	2006-07-15 22:34:41.532884110 +0000
+++ linux-2.6.18-rc2/arch/i386/kernel/time.c	2006-07-15 22:34:46.681442977 +0000
@@ -206,15 +206,16 @@
 unsigned long get_cmos_time(void)
 {
 	unsigned long retval;
+	unsigned long flags;
 
-	spin_lock(&rtc_lock);
+	spin_lock_irqsave(&rtc_lock, flags);
 
 	if (efi_enabled)
 		retval = efi_get_time();
 	else
 		retval = mach_get_cmos_time();
 
-	spin_unlock(&rtc_lock);
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	return retval;
 }
diff -urN linux-2.6.18-rc1/arch/i386/kernel/traps.c linux-2.6.18-rc2/arch/i386/kernel/traps.c
--- linux-2.6.18-rc1/arch/i386/kernel/traps.c	2006-07-15 22:34:41.540884978 +0000
+++ linux-2.6.18-rc2/arch/i386/kernel/traps.c	2006-07-15 22:34:46.689443845 +0000
@@ -100,13 +100,13 @@
 	vmalloc_sync_all();
 	return atomic_notifier_chain_register(&i386die_chain, nb);
 }
-EXPORT_SYMBOL(register_die_notifier);
+EXPORT_SYMBOL(register_die_notifier); /* used modular by kdb */
 
 int unregister_die_notifier(struct notifier_block *nb)
 {
 	return atomic_notifier_chain_unregister(&i386die_chain, nb);
 }
-EXPORT_SYMBOL(unregister_die_notifier);
+EXPORT_SYMBOL(unregister_die_notifier); /* used modular by kdb */
 
 static inline int valid_stack_ptr(struct thread_info *tinfo, void *p)
 {
@@ -324,35 +324,35 @@
 
 static void handle_BUG(struct pt_regs *regs)
 {
+	unsigned long eip = regs->eip;
 	unsigned short ud2;
-	unsigned short line;
-	char *file;
-	char c;
-	unsigned long eip;
-
-	eip = regs->eip;
 
 	if (eip < PAGE_OFFSET)
-		goto no_bug;
+		return;
 	if (__get_user(ud2, (unsigned short __user *)eip))
-		goto no_bug;
+		return;
 	if (ud2 != 0x0b0f)
-		goto no_bug;
-	if (__get_user(line, (unsigned short __user *)(eip + 2)))
-		goto bug;
-	if (__get_user(file, (char * __user *)(eip + 4)) ||
-		(unsigned long)file < PAGE_OFFSET || __get_user(c, file))
-		file = "<bad filename>";
+		return;
 
 	printk(KERN_EMERG "------------[ cut here ]------------\n");
-	printk(KERN_EMERG "kernel BUG at %s:%d!\n", file, line);
 
-no_bug:
-	return;
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+	do {
+		unsigned short line;
+		char *file;
+		char c;
 
-	/* Here we know it was a BUG but file-n-line is unavailable */
-bug:
-	printk(KERN_EMERG "Kernel BUG\n");
+		if (__get_user(line, (unsigned short __user *)(eip + 2)))
+			break;
+		if (__get_user(file, (char * __user *)(eip + 4)) ||
+		    (unsigned long)file < PAGE_OFFSET || __get_user(c, file))
+			file = "<bad filename>";
+
+		printk(KERN_EMERG "kernel BUG at %s:%d!\n", file, line);
+		return;
+	} while (0);
+#endif
+	printk(KERN_EMERG "Kernel BUG at [verbose debug info unavailable]\n");
 }
 
 /* This is gone through when something in the kernel
diff -urN linux-2.6.18-rc1/arch/i386/lib/usercopy.c linux-2.6.18-rc2/arch/i386/lib/usercopy.c
--- linux-2.6.18-rc1/arch/i386/lib/usercopy.c	2006-07-15 22:34:41.544885413 +0000
+++ linux-2.6.18-rc2/arch/i386/lib/usercopy.c	2006-07-15 22:34:46.689443845 +0000
@@ -843,7 +843,6 @@
 unsigned long
 copy_to_user(void __user *to, const void *from, unsigned long n)
 {
-	might_sleep();
 	BUG_ON((long) n < 0);
 	if (access_ok(VERIFY_WRITE, to, n))
 		n = __copy_to_user(to, from, n);
@@ -870,7 +869,6 @@
 unsigned long
 copy_from_user(void *to, const void __user *from, unsigned long n)
 {
-	might_sleep();
 	BUG_ON((long) n < 0);
 	if (access_ok(VERIFY_READ, from, n))
 		n = __copy_from_user(to, from, n);
diff -urN linux-2.6.18-rc1/arch/i386/oprofile/nmi_int.c linux-2.6.18-rc2/arch/i386/oprofile/nmi_int.c
--- linux-2.6.18-rc1/arch/i386/oprofile/nmi_int.c	2006-07-15 22:34:41.548885847 +0000
+++ linux-2.6.18-rc2/arch/i386/oprofile/nmi_int.c	2006-07-15 22:34:46.697444714 +0000
@@ -13,6 +13,7 @@
 #include <linux/oprofile.h>
 #include <linux/sysdev.h>
 #include <linux/slab.h>
+#include <linux/moduleparam.h>
 #include <asm/nmi.h>
 #include <asm/msr.h>
 #include <asm/apic.h>
@@ -296,12 +297,14 @@
 	return 0;
 }
  
+static int p4force;
+module_param(p4force, int, 0);
  
 static int __init p4_init(char ** cpu_type)
 {
 	__u8 cpu_model = boot_cpu_data.x86_model;
 
-	if (cpu_model > 4)
+	if (!p4force && (cpu_model > 6 || cpu_model == 5))
 		return 0;
 
 #ifndef CONFIG_SMP
diff -urN linux-2.6.18-rc1/arch/i386/pci/common.c linux-2.6.18-rc2/arch/i386/pci/common.c
--- linux-2.6.18-rc1/arch/i386/pci/common.c	2006-07-15 22:34:41.548885847 +0000
+++ linux-2.6.18-rc2/arch/i386/pci/common.c	2006-07-15 22:34:46.697444714 +0000
@@ -17,10 +17,6 @@
 
 #include "pci.h"
 
-#ifdef CONFIG_PCI_BIOS
-extern  void pcibios_sort(void);
-#endif
-
 unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
 				PCI_PROBE_MMCONF;
 
diff -urN linux-2.6.18-rc1/arch/i386/pci/pci.h linux-2.6.18-rc2/arch/i386/pci/pci.h
--- linux-2.6.18-rc1/arch/i386/pci/pci.h	2006-07-15 22:34:41.548885847 +0000
+++ linux-2.6.18-rc2/arch/i386/pci/pci.h	2006-07-15 22:34:46.697444714 +0000
@@ -84,4 +84,4 @@
 extern void pci_direct_init(void);
 extern void pci_pcbios_init(void);
 extern void pci_mmcfg_init(void);
-
+extern void pcibios_sort(void);
diff -urN linux-2.6.18-rc1/arch/ia64/dig/setup.c linux-2.6.18-rc2/arch/ia64/dig/setup.c
--- linux-2.6.18-rc1/arch/ia64/dig/setup.c	2006-07-15 22:34:41.552886281 +0000
+++ linux-2.6.18-rc2/arch/ia64/dig/setup.c	2006-07-15 22:34:46.697444714 +0000
@@ -14,7 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/kdev_t.h>
 #include <linux/string.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/console.h>
 #include <linux/timex.h>
 #include <linux/sched.h>
diff -urN linux-2.6.18-rc1/arch/ia64/kernel/efi.c linux-2.6.18-rc2/arch/ia64/kernel/efi.c
--- linux-2.6.18-rc1/arch/ia64/kernel/efi.c	2006-07-15 22:34:41.556886715 +0000
+++ linux-2.6.18-rc2/arch/ia64/kernel/efi.c	2006-07-15 22:34:46.705445582 +0000
@@ -759,7 +759,7 @@
 }
 
 int
-valid_mmap_phys_addr_range (unsigned long phys_addr, unsigned long size)
+valid_mmap_phys_addr_range (unsigned long pfn, unsigned long size)
 {
 	/*
 	 * MMIO regions are often missing from the EFI memory map.
diff -urN linux-2.6.18-rc1/arch/ia64/kernel/setup.c linux-2.6.18-rc2/arch/ia64/kernel/setup.c
--- linux-2.6.18-rc1/arch/ia64/kernel/setup.c	2006-07-15 22:34:41.564887584 +0000
+++ linux-2.6.18-rc2/arch/ia64/kernel/setup.c	2006-07-15 22:34:46.717446885 +0000
@@ -35,7 +35,7 @@
 #include <linux/seq_file.h>
 #include <linux/string.h>
 #include <linux/threads.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/dmi.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
diff -urN linux-2.6.18-rc1/arch/ia64/pci/pci.c linux-2.6.18-rc2/arch/ia64/pci/pci.c
--- linux-2.6.18-rc1/arch/ia64/pci/pci.c	2006-07-15 22:34:41.568888018 +0000
+++ linux-2.6.18-rc2/arch/ia64/pci/pci.c	2006-07-15 22:34:46.721447319 +0000
@@ -650,7 +650,7 @@
 	 * Avoid attribute aliasing.  See Documentation/ia64/aliasing.txt
 	 * for more details.
 	 */
-	if (!valid_mmap_phys_addr_range(vma->vm_pgoff << PAGE_SHIFT, size))
+	if (!valid_mmap_phys_addr_range(vma->vm_pgoff, size))
 		return -EINVAL;
 	prot = phys_mem_access_prot(NULL, vma->vm_pgoff, size,
 				    vma->vm_page_prot);
diff -urN linux-2.6.18-rc1/arch/ia64/sn/kernel/setup.c linux-2.6.18-rc2/arch/ia64/sn/kernel/setup.c
--- linux-2.6.18-rc1/arch/ia64/sn/kernel/setup.c	2006-07-15 22:34:41.572888452 +0000
+++ linux-2.6.18-rc2/arch/ia64/sn/kernel/setup.c	2006-07-15 22:34:46.721447319 +0000
@@ -12,7 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/kdev_t.h>
 #include <linux/string.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/console.h>
 #include <linux/timex.h>
 #include <linux/sched.h>
diff -urN linux-2.6.18-rc1/arch/m32r/kernel/setup.c linux-2.6.18-rc2/arch/m32r/kernel/setup.c
--- linux-2.6.18-rc1/arch/m32r/kernel/setup.c	2006-07-15 22:34:41.580889321 +0000
+++ linux-2.6.18-rc2/arch/m32r/kernel/setup.c	2006-07-15 22:34:46.729448188 +0000
@@ -21,7 +21,7 @@
 #include <linux/root_dev.h>
 #include <linux/seq_file.h>
 #include <linux/timex.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/cpu.h>
 #include <linux/nodemask.h>
 #include <linux/pfn.h>
diff -urN linux-2.6.18-rc1/arch/mips/Kconfig linux-2.6.18-rc2/arch/mips/Kconfig
--- linux-2.6.18-rc1/arch/mips/Kconfig	2006-07-15 22:34:41.612892795 +0000
+++ linux-2.6.18-rc2/arch/mips/Kconfig	2006-07-15 22:34:46.765452096 +0000
@@ -480,6 +480,7 @@
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
+	select ARCH_SPARSEMEM_ENABLE
 	help
 	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
 	  Momentum Computer <http://www.momenco.com/>.
@@ -556,6 +557,7 @@
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
+	select ARCH_SPARSEMEM_ENABLE
 	help
 	  Qemu is a software emulator which among other architectures also
 	  can simulate a MIPS32 4Kc system.  This patch adds support for the
@@ -594,7 +596,6 @@
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_SMP
 	help
 	  This are the SGI Indy, Challenge S and Indigo2, as well as certain
 	  OEM variants like the Tandem CMN B006S. To compile a Linux kernel
@@ -1688,6 +1689,13 @@
 	  or have huge holes in the physical address space for other reasons.
 	  See <file:Documentation/vm/numa> for more.
 
+config ARCH_SPARSEMEM_ENABLE
+	bool
+
+config ARCH_SPARSEMEM_ENABLE
+	bool
+	select SPARSEMEM_STATIC
+
 config NUMA
 	bool "NUMA Support"
 	depends on SYS_SUPPORTS_NUMA
diff -urN linux-2.6.18-rc1/arch/mips/Kconfig.debug linux-2.6.18-rc2/arch/mips/Kconfig.debug
--- linux-2.6.18-rc1/arch/mips/Kconfig.debug	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/mips/Kconfig.debug	2006-07-15 22:34:46.765452096 +0000
@@ -1,5 +1,9 @@
 menu "Kernel hacking"
 
+config TRACE_IRQFLAGS_SUPPORT
+	bool
+	default y
+
 source "lib/Kconfig.debug"
 
 config CROSSCOMPILE
diff -urN linux-2.6.18-rc1/arch/mips/Makefile linux-2.6.18-rc2/arch/mips/Makefile
--- linux-2.6.18-rc1/arch/mips/Makefile	2006-07-15 22:34:41.612892795 +0000
+++ linux-2.6.18-rc2/arch/mips/Makefile	2006-07-15 22:34:46.765452096 +0000
@@ -712,16 +712,14 @@
 vmlinux.bin: $(vmlinux-32)
 	+@$(call makeboot,$@)
 
-vmlinux.ecoff vmlinux.rm200: $(vmlinux-32)
+vmlinux.ecoff: $(vmlinux-32)
 	+@$(call makeboot,$@)
 
 vmlinux.srec: $(vmlinux-32)
 	+@$(call makeboot,$@)
 
 CLEAN_FILES += vmlinux.ecoff \
-	       vmlinux.srec \
-	       vmlinux.rm200.tmp \
-	       vmlinux.rm200
+	       vmlinux.srec
 
 archclean:
 	@$(MAKE) $(clean)=arch/mips/boot
diff -urN linux-2.6.18-rc1/arch/mips/au1000/common/irq.c linux-2.6.18-rc2/arch/mips/au1000/common/irq.c
--- linux-2.6.18-rc1/arch/mips/au1000/common/irq.c	2006-07-15 22:34:41.612892795 +0000
+++ linux-2.6.18-rc2/arch/mips/au1000/common/irq.c	2006-07-15 22:34:46.769452530 +0000
@@ -251,7 +251,7 @@
 }
 
 
-static struct hw_interrupt_type rise_edge_irq_type = {
+static struct irq_chip rise_edge_irq_type = {
 	.typename = "Au1000 Rise Edge",
 	.startup = startup_irq,
 	.shutdown = shutdown_irq,
@@ -261,7 +261,7 @@
 	.end = end_irq,
 };
 
-static struct hw_interrupt_type fall_edge_irq_type = {
+static struct irq_chip fall_edge_irq_type = {
 	.typename = "Au1000 Fall Edge",
 	.startup = startup_irq,
 	.shutdown = shutdown_irq,
@@ -271,7 +271,7 @@
 	.end = end_irq,
 };
 
-static struct hw_interrupt_type either_edge_irq_type = {
+static struct irq_chip either_edge_irq_type = {
 	.typename = "Au1000 Rise or Fall Edge",
 	.startup = startup_irq,
 	.shutdown = shutdown_irq,
@@ -281,7 +281,7 @@
 	.end = end_irq,
 };
 
-static struct hw_interrupt_type level_irq_type = {
+static struct irq_chip level_irq_type = {
 	.typename = "Au1000 Level",
 	.startup = startup_irq,
 	.shutdown = shutdown_irq,
diff -urN linux-2.6.18-rc1/arch/mips/au1000/common/prom.c linux-2.6.18-rc2/arch/mips/au1000/common/prom.c
--- linux-2.6.18-rc1/arch/mips/au1000/common/prom.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/mips/au1000/common/prom.c	2006-07-15 22:34:46.769452530 +0000
@@ -1,7 +1,7 @@
 /*
  *
  * BRIEF MODULE DESCRIPTION
- *    PROM library initialisation code, assuming YAMON is the boot loader.
+ *    PROM library initialisation code, supports YAMON and U-Boot.
  *
  * Copyright 2000, 2001, 2006 MontaVista Software Inc.
  * Author: MontaVista Software, Inc.
@@ -46,12 +46,6 @@
 extern int prom_argc;
 extern char **prom_argv, **prom_envp;
 
-typedef struct
-{
-	char *name;
-	char *val;
-} t_env_var;
-
 
 char * prom_getcmdline(void)
 {
@@ -84,13 +78,21 @@
 {
 	/*
 	 * Return a pointer to the given environment variable.
+	 * YAMON uses "name", "value" pairs, while U-Boot uses "name=value".
 	 */
 
-	t_env_var *env = (t_env_var *)prom_envp;
-
-	while (env->name) {
-		if (strcmp(envname, env->name) == 0)
-			return env->val;
+	char **env = prom_envp;
+	int i = strlen(envname);
+	int yamon = (*env && strchr(*env, '=') == NULL);
+
+	while (*env) {
+		if (yamon) {
+			if (strcmp(envname, *env++) == 0)
+				return *env;
+		} else {
+			if (strncmp(envname, *env, i) == 0 && (*env)[i] == '=')
+				return *env + i + 1;
+		}
 		env++;
 	}
 	return NULL;
diff -urN linux-2.6.18-rc1/arch/mips/au1000/common/setup.c linux-2.6.18-rc2/arch/mips/au1000/common/setup.c
--- linux-2.6.18-rc1/arch/mips/au1000/common/setup.c	2006-07-15 22:34:41.616893229 +0000
+++ linux-2.6.18-rc2/arch/mips/au1000/common/setup.c	2006-07-15 22:34:46.769452530 +0000
@@ -51,7 +51,6 @@
 extern void au1x_time_init(void);
 extern void au1x_timer_setup(struct irqaction *irq);
 extern void au1xxx_time_init(void);
-extern void au1xxx_timer_setup(struct irqaction *irq);
 extern void set_cpuspec(void);
 
 void __init plat_mem_setup(void)
@@ -123,7 +122,6 @@
 	_machine_halt = au1000_halt;
 	pm_power_off = au1000_power_off;
 	board_time_init = au1xxx_time_init;
-	board_timer_setup = au1xxx_timer_setup;
 
 	/* IO/MEM resources. */
 	set_io_port_base(0);
diff -urN linux-2.6.18-rc1/arch/mips/au1000/common/time.c linux-2.6.18-rc2/arch/mips/au1000/common/time.c
--- linux-2.6.18-rc1/arch/mips/au1000/common/time.c	2006-07-15 22:34:41.616893229 +0000
+++ linux-2.6.18-rc2/arch/mips/au1000/common/time.c	2006-07-15 22:34:46.769452530 +0000
@@ -383,7 +383,7 @@
 }
 #endif
 
-void __init au1xxx_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
 	unsigned int est_freq;
 
diff -urN linux-2.6.18-rc1/arch/mips/au1000/csb250/Makefile linux-2.6.18-rc2/arch/mips/au1000/csb250/Makefile
--- linux-2.6.18-rc1/arch/mips/au1000/csb250/Makefile	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/mips/au1000/csb250/Makefile	1970-01-01 00:00:00.000000000 +0000
@@ -1,8 +0,0 @@
-#
-#  Copyright 2002 Cogent Computer Systems
-#     	dan@embeddededge.com
-#
-# Makefile for the Cogent CSB250 Au1500 board.  Copied from Pb1500.
-#
-
-obj-y := init.o board_setup.o irqmap.o
diff -urN linux-2.6.18-rc1/arch/mips/au1000/csb250/board_setup.c linux-2.6.18-rc2/arch/mips/au1000/csb250/board_setup.c
--- linux-2.6.18-rc1/arch/mips/au1000/csb250/board_setup.c	2006-07-15 22:34:41.616893229 +0000
+++ linux-2.6.18-rc2/arch/mips/au1000/csb250/board_setup.c	1970-01-01 00:00:00.000000000 +0000
@@ -1,238 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Cogent CSB250 board setup.
- *
- * Copyright 2002 Cogent Computer Systems, Inc.
- *	dan@embeddededge.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/mc146818rtc.h>
-#include <linux/delay.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/keyboard.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
-#include <asm/au1000.h>
-#include <asm/csb250.h>
-
-extern int (*board_pci_idsel)(unsigned int devsel, int assert);
-int	csb250_pci_idsel(unsigned int devsel, int assert);
-
-void __init board_setup(void)
-{
-	u32 pin_func, pin_val;
-	u32 sys_freqctrl, sys_clksrc;
-
-
-	// set AUX clock to 12MHz * 8 = 96 MHz
-	au_writel(8, SYS_AUXPLL);
-	au_writel(0, SYS_PINSTATERD);
-	udelay(100);
-
-#if defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
-
-	/* GPIO201 is input for PCMCIA card detect */
-	/* GPIO203 is input for PCMCIA interrupt request */
-	au_writel(au_readl(GPIO2_DIR) & (u32)(~((1<<1)|(1<<3))), GPIO2_DIR);
-
-	/* zero and disable FREQ2 */
-	sys_freqctrl = au_readl(SYS_FREQCTRL0);
-	sys_freqctrl &= ~0xFFF00000;
-	au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
-	/* zero and disable USBH/USBD clocks */
-	sys_clksrc = au_readl(SYS_CLKSRC);
-	sys_clksrc &= ~0x00007FE0;
-	au_writel(sys_clksrc, SYS_CLKSRC);
-
-	sys_freqctrl = au_readl(SYS_FREQCTRL0);
-	sys_freqctrl &= ~0xFFF00000;
-
-	sys_clksrc = au_readl(SYS_CLKSRC);
-	sys_clksrc &= ~0x00007FE0;
-
-	// FREQ2 = aux/2 = 48 MHz
-	sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
-	au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
-	/*
-	 * Route 48MHz FREQ2 into USB Host and/or Device
-	 */
-#ifdef CONFIG_USB_OHCI
-	sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
-#endif
-#ifdef CONFIG_AU1X00_USB_DEVICE
-	sys_clksrc |= ((4<<7) | (0<<6) | (0<<5));
-#endif
-	au_writel(sys_clksrc, SYS_CLKSRC);
-
-
-	pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
-#ifndef CONFIG_AU1X00_USB_DEVICE
-	// 2nd USB port is USB host
-	pin_func |= 0x8000;
-#endif
-	au_writel(pin_func, SYS_PINFUNC);
-#endif // defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
-
-	/* Configure GPIO2....it's used by PCI among other things.
-	*/
-
-	/* Make everything but GP200 (PCI RST) an input until we get
-	 * the pins set correctly.
-	 */
-	au_writel(0x00000001, GPIO2_DIR);
-
-	/* Set the pins used for output.
-	 * A zero bit will leave PCI reset, LEDs off, power up USB,
-	 * IDSEL disabled.
-	 */
-	pin_val = ((3 << 30) | (7 << 19) | (1 << 17) | (1 << 16));
-	au_writel(pin_val, GPIO2_OUTPUT);
-
-	/* Set the output direction.
-	*/
-	pin_val = ((3 << 14) | (7 << 3) | (1 << 1) | (1 << 0));
-	au_writel(pin_val, GPIO2_DIR);
-
-#ifdef CONFIG_PCI
-	/* Use FREQ1 for the PCI output clock.  We use the
-	 * CPU clock of 384 MHz divided by 12 to get 32 MHz PCI.
-	 * If Michael changes the CPU speed, we need to adjust
-	 * that here as well :-).
-	 */
-
-	/* zero and disable FREQ1
-	*/
-	sys_freqctrl = au_readl(SYS_FREQCTRL0);
-	sys_freqctrl &= ~0x000ffc00;
-	au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
-	/* zero and disable PCI clock
-	*/
-	sys_clksrc = au_readl(SYS_CLKSRC);
-	sys_clksrc &= ~0x000f8000;
-	au_writel(sys_clksrc, SYS_CLKSRC);
-
-	/* Get current values (which really should match above).
-	*/
-	sys_freqctrl = au_readl(SYS_FREQCTRL0);
-	sys_freqctrl &= ~0x000ffc00;
-
-	sys_clksrc = au_readl(SYS_CLKSRC);
-	sys_clksrc &= ~0x000f8000;
-
-	/* FREQ1 = cpu/12 = 32 MHz
-	*/
-	sys_freqctrl |= ((5<<12) | (1<<11) | (0<<10));
-	au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
-	/* Just connect the clock without further dividing.
-	*/
-	sys_clksrc |= ((3<<17) | (0<<16) | (0<<15));
-	au_writel(sys_clksrc, SYS_CLKSRC);
-
-	udelay(1);
-
-	/* Now that clocks should be running, take PCI out of reset.
-	*/
-	pin_val = au_readl(GPIO2_OUTPUT);
-	pin_val |= ((1 << 16) | 1);
-	au_writel(pin_val, GPIO2_OUTPUT);
-
-	// Setup PCI bus controller
-	au_writel(0, Au1500_PCI_CMEM);
-	au_writel(0x00003fff, Au1500_CFG_BASE);
-
-	/* We run big endian without any of the software byte swapping,
-	 * so configure the PCI bridge to help us out.
-	 */
-	au_writel(0xf | (2<<6) | (1<<5) | (1<<4), Au1500_PCI_CFG);
-
-	au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV);
-	au_writel(0, Au1500_PCI_MWBASE_REV_CCL);
-	au_writel(0x02a00356, Au1500_PCI_STATCMD);
-	au_writel(0x00003c04, Au1500_PCI_HDRTYPE);
-	au_writel(0x00000008, Au1500_PCI_MBAR);
-	au_sync();
-
-	board_pci_idsel = csb250_pci_idsel;
-#endif
-
-	/* Enable sys bus clock divider when IDLE state or no bus activity. */
-	au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
-
-#ifdef CONFIG_RTC
-	// Enable the RTC if not already enabled
-	if (!(au_readl(0xac000028) & 0x20)) {
-		printk("enabling clock ...\n");
-		au_writel((au_readl(0xac000028) | 0x20), 0xac000028);
-	}
-	// Put the clock in BCD mode
-	if (readl(0xac00002C) & 0x4) { /* reg B */
-		au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c);
-		au_sync();
-	}
-#endif
-}
-
-/* The IDSEL is selected in the GPIO2 register.  We will make device
- * 12 appear in slot 0 and device 13 appear in slot 1.
- */
-int
-csb250_pci_idsel(unsigned int devsel, int assert)
-{
-	int		retval;
-	unsigned int	gpio2_pins;
-
-	retval = 1;
-
-	/* First, disable both selects, then assert the one requested.
-	*/
-	au_writel(0xc000c000, GPIO2_OUTPUT);
-	au_sync();
-
-	if (assert) {
-		if (devsel == 12)
-			gpio2_pins = 0x40000000;
-		else if (devsel == 13)
-			gpio2_pins = 0x80000000;
-		else {
-			gpio2_pins = 0xc000c000;
-			retval = 0;
-		}
-		au_writel(gpio2_pins, GPIO2_OUTPUT);
-	}
-	au_sync();
-
-	return retval;
-}
diff -urN linux-2.6.18-rc1/arch/mips/au1000/csb250/init.c linux-2.6.18-rc2/arch/mips/au1000/csb250/init.c
--- linux-2.6.18-rc1/arch/mips/au1000/csb250/init.c	2006-07-15 22:34:41.616893229 +0000
+++ linux-2.6.18-rc2/arch/mips/au1000/csb250/init.c	1970-01-01 00:00:00.000000000 +0000
@@ -1,94 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Cogent CSB250 board setup
- *
- * Copyright 2002 Cogent Computer Systems, Inc.
- * 	dan@embeddededge.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-int prom_argc;
-char **prom_argv, **prom_envp;
-extern void  __init prom_init_cmdline(void);
-extern char *prom_getenv(char *envname);
-
-/* When we get initrd working someday.........
-*/
-int	my_initrd_start, my_initrd_size;
-
-/* Start arguments and environment.
-*/
-static char	*csb_env[2];
-static char	*csb_arg[4];
-static char	*arg1 = "console=ttyS3,38400";
-static char	*arg2 = "root=/dev/nfs rw ip=any";
-static char	*env1 = "ethaddr=00:30:23:50:00:00";
-
-const char *get_system_type(void)
-{
-	return "Cogent CSB250";
-}
-
-int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
-{
-	unsigned char *memsize_str;
-	unsigned long memsize;
-
-	/* We use a0 and a1 to pass initrd start and size.
-	*/
-	if (((unsigned int) argc > 0) && ((uint)argv > 0)) {
-		my_initrd_start = (unsigned int)argc;
-		my_initrd_size = (unsigned int)argv;
-	}
-
-	/* First argv is ignored.
-	*/
-	prom_argc = 3;
-	prom_argv = csb_arg;
-	prom_envp = csb_env;
-	csb_arg[1] = arg1;
-	csb_arg[2] = arg2;
-	csb_env[0] = env1;
-
-	mips_machgroup = MACH_GROUP_ALCHEMY;
-	mips_machtype = MACH_CSB250;
-
-	prom_init_cmdline();
-	memsize_str = prom_getenv("memsize");
-	if (!memsize_str) {
-		memsize = 0x02000000;
-	} else {
-		memsize = simple_strtol(memsize_str, NULL, 0);
-	}
-	add_memory_region(0, memsize, BOOT_MEM_RAM);
-	return 0;
-}
diff -urN linux-2.6.18-rc1/arch/mips/au1000/csb250/irqmap.c linux-2.6.18-rc2/arch/mips/au1000/csb250/irqmap.c
--- linux-2.6.18-rc1/arch/mips/au1000/csb250/irqmap.c	2006-07-15 22:34:41.616893229 +0000
+++ linux-2.6.18-rc2/arch/mips/au1000/csb250/irqmap.c	1970-01-01 00:00:00.000000000 +0000
@@ -1,60 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Au1xxx irq map table
- *
- * Copyright 2003 Embedded Edge, LLC
- *		dan@embeddededge.com
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
-
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-#include <asm/au1000.h>
-
-au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
-
-	{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
-	{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
-};
-
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
diff -urN linux-2.6.18-rc1/arch/mips/au1000/hydrogen3/Makefile linux-2.6.18-rc2/arch/mips/au1000/hydrogen3/Makefile
--- linux-2.6.18-rc1/arch/mips/au1000/hydrogen3/Makefile	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/mips/au1000/hydrogen3/Makefile	1970-01-01 00:00:00.000000000 +0000
@@ -1,9 +0,0 @@
-#
-#  Copyright 2000 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc.
-#     	ppopov@mvista.com or source@mvista.com
-#
-# Makefile for the Alchemy Semiconductor PB1000 board.
-#
-
-obj-y := init.o board_setup.o irqmap.o
diff -urN linux-2.6.18-rc1/arch/mips/au1000/hydrogen3/board_setup.c linux-2.6.18-rc2/arch/mips/au1000/hydrogen3/board_setup.c
--- linux-2.6.18-rc1/arch/mips/au1000/hydrogen3/board_setup.c	2006-07-15 22:34:41.616893229 +0000
+++ linux-2.6.18-rc2/arch/mips/au1000/hydrogen3/board_setup.c	1970-01-01 00:00:00.000000000 +0000
@@ -1,69 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Alchemy Db1x00 board setup.
- *
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@mvista.com or source@mvista.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/mc146818rtc.h>
-#include <linux/delay.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/keyboard.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
-#include <asm/au1000.h>
-
-void board_reset (void)
-{
-}
-
-void __init board_setup(void)
-{
-	u32 pin_func;
-
-#ifdef CONFIG_AU1X00_USB_DEVICE
-	// 2nd USB port is USB device
-	pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
-	au_writel(pin_func, SYS_PINFUNC);
-#endif
-
-#if defined(CONFIG_IRDA) && (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
-	/* set IRFIRSEL instead of GPIO15 */
-	pin_func = au_readl(SYS_PINFUNC) | (u32)((1<<8));
-	au_writel(pin_func, SYS_PINFUNC);
-	au_sync();
-#endif
-
-    printk("AMD Alchemy Hydrogen3 Board\n");
-}
diff -urN linux-2.6.18-rc1/arch/mips/au1000/hydrogen3/init.c linux-2.6.18-rc2/arch/mips/au1000/hydrogen3/init.c
--- linux-2.6.18-rc1/arch/mips/au1000/hydrogen3/init.c	2006-07-15 22:34:41.616893229 +0000
+++ linux-2.6.18-rc2/arch/mips/au1000/hydrogen3/init.c	1970-01-01 00:00:00.000000000 +0000
@@ -1,75 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	PB1000 board setup
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@mvista.com or source@mvista.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-int prom_argc;
-char **prom_argv, **prom_envp;
-extern void  __init prom_init_cmdline(void);
-extern char *prom_getenv(char *envname);
-
-const char *get_system_type(void)
-{
-#ifdef CONFIG_MIPS_BOSPORUS
-	return "Alchemy Bosporus Gateway Reference";
-#else
-	return "Alchemy Db1x00";
-#endif
-}
-
-int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
-{
-	unsigned char *memsize_str;
-	unsigned long memsize;
-
-	prom_argc = argc;
-	prom_argv = argv;
-	prom_envp = envp;
-
-	mips_machgroup = MACH_GROUP_ALCHEMY;
-	mips_machtype = MACH_DB1000;	/* set the platform # */
-	prom_init_cmdline();
-
-	memsize_str = prom_getenv("memsize");
-	if (!memsize_str) {
-		memsize = 0x04000000;
-	} else {
-		memsize = simple_strtol(memsize_str, NULL, 0);
-	}
-	add_memory_region(0, memsize, BOOT_MEM_RAM);
-	return 0;
-}
diff -urN linux-2.6.18-rc1/arch/mips/au1000/hydrogen3/irqmap.c linux-2.6.18-rc2/arch/mips/au1000/hydrogen3/irqmap.c
--- linux-2.6.18-rc1/arch/mips/au1000/hydrogen3/irqmap.c	2006-07-15 22:34:41.616893229 +0000
+++ linux-2.6.18-rc2/arch/mips/au1000/hydrogen3/irqmap.c	1970-01-01 00:00:00.000000000 +0000
@@ -1,56 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Au1xxx irq map table
- *
- * Copyright 2003 Embedded Edge, LLC
- *		dan@embeddededge.com
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
-
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-#include <asm/au1000.h>
-
-au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
-
-	/* { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, */
-	{ AU1000_GPIO_21, INTC_INT_LOW_LEVEL, 0 },
-};
-
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
diff -urN linux-2.6.18-rc1/arch/mips/au1000/pb1200/irqmap.c linux-2.6.18-rc2/arch/mips/au1000/pb1200/irqmap.c
--- linux-2.6.18-rc1/arch/mips/au1000/pb1200/irqmap.c	2006-07-15 22:34:41.616893229 +0000
+++ linux-2.6.18-rc2/arch/mips/au1000/pb1200/irqmap.c	2006-07-15 22:34:46.777453399 +0000
@@ -148,7 +148,7 @@
 	}
 }
 
-static struct hw_interrupt_type external_irq_type =
+static struct irq_chip external_irq_type =
 {
 #ifdef CONFIG_MIPS_PB1200
 	"Pb1200 Ext",
diff -urN linux-2.6.18-rc1/arch/mips/basler/excite/excite_dbg_io.c linux-2.6.18-rc2/arch/mips/basler/excite/excite_dbg_io.c
--- linux-2.6.18-rc1/arch/mips/basler/excite/excite_dbg_io.c	2006-07-15 22:34:41.616893229 +0000
+++ linux-2.6.18-rc2/arch/mips/basler/excite/excite_dbg_io.c	2006-07-15 22:34:46.781453833 +0000
@@ -17,7 +17,6 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/config.h>
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
diff -urN linux-2.6.18-rc1/arch/mips/basler/excite/excite_device.c linux-2.6.18-rc2/arch/mips/basler/excite/excite_device.c
--- linux-2.6.18-rc1/arch/mips/basler/excite/excite_device.c	2006-07-15 22:34:41.620893663 +0000
+++ linux-2.6.18-rc2/arch/mips/basler/excite/excite_device.c	2006-07-15 22:34:46.781453833 +0000
@@ -17,7 +17,6 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
diff -urN linux-2.6.18-rc1/arch/mips/basler/excite/excite_iodev.c linux-2.6.18-rc2/arch/mips/basler/excite/excite_iodev.c
--- linux-2.6.18-rc1/arch/mips/basler/excite/excite_iodev.c	2006-07-15 22:34:41.620893663 +0000
+++ linux-2.6.18-rc2/arch/mips/basler/excite/excite_iodev.c	2006-07-15 22:34:46.781453833 +0000
@@ -17,7 +17,6 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/config.h>
 #include <linux/compiler.h>
 #include <linux/init.h>
 #include <linux/module.h>
diff -urN linux-2.6.18-rc1/arch/mips/basler/excite/excite_procfs.c linux-2.6.18-rc2/arch/mips/basler/excite/excite_procfs.c
--- linux-2.6.18-rc1/arch/mips/basler/excite/excite_procfs.c	2006-07-15 22:34:41.620893663 +0000
+++ linux-2.6.18-rc2/arch/mips/basler/excite/excite_procfs.c	2006-07-15 22:34:46.781453833 +0000
@@ -19,7 +19,6 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/config.h>
 #include <linux/proc_fs.h>
 #include <linux/stat.h>
 #include <asm/page.h>
diff -urN linux-2.6.18-rc1/arch/mips/basler/excite/excite_prom.c linux-2.6.18-rc2/arch/mips/basler/excite/excite_prom.c
--- linux-2.6.18-rc1/arch/mips/basler/excite/excite_prom.c	2006-07-15 22:34:41.620893663 +0000
+++ linux-2.6.18-rc2/arch/mips/basler/excite/excite_prom.c	2006-07-15 22:34:46.781453833 +0000
@@ -18,7 +18,6 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/config.h>
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
diff -urN linux-2.6.18-rc1/arch/mips/basler/excite/excite_setup.c linux-2.6.18-rc2/arch/mips/basler/excite/excite_setup.c
--- linux-2.6.18-rc1/arch/mips/basler/excite/excite_setup.c	2006-07-15 22:34:41.620893663 +0000
+++ linux-2.6.18-rc2/arch/mips/basler/excite/excite_setup.c	2006-07-15 22:34:46.781453833 +0000
@@ -19,7 +19,6 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -79,7 +78,7 @@
 	mips_hpt_frequency = EXCITE_CPU_EXT_CLOCK * mult / div / 2;
 }
 
-static void excite_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
 	/* The eXcite platform uses the alternate timer interrupt */
 	set_c0_intcontrol(0x80);
@@ -263,7 +262,6 @@
 
 	/* Set up timer initialization hooks */
 	board_time_init = excite_timer_init;
-	board_timer_setup = excite_timer_setup;
 
 	/* Set up the peripheral address map */
 	*(boot_ocd_base + (LKB9 / sizeof (u32))) = 0;
diff -urN linux-2.6.18-rc1/arch/mips/cobalt/setup.c linux-2.6.18-rc2/arch/mips/cobalt/setup.c
--- linux-2.6.18-rc1/arch/mips/cobalt/setup.c	2006-07-15 22:34:41.620893663 +0000
+++ linux-2.6.18-rc2/arch/mips/cobalt/setup.c	2006-07-15 22:34:46.781453833 +0000
@@ -49,7 +49,7 @@
 	return "MIPS Cobalt";
 }
 
-static void __init cobalt_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
 	/* Load timer value for 1KHz (TCLK is 50MHz) */
 	GALILEO_OUTL(50*1000*1000 / 1000, GT_TC0_OFS);
@@ -129,8 +129,6 @@
 	_machine_halt = cobalt_machine_halt;
 	pm_power_off = cobalt_machine_power_off;
 
-	board_timer_setup = cobalt_timer_setup;
-
         set_io_port_base(CKSEG1ADDR(GT64111_IO_BASE));
 
 	/* I/O port resource must include UART and LCD/buttons */
diff -urN linux-2.6.18-rc1/arch/mips/configs/atlas_defconfig linux-2.6.18-rc2/arch/mips/configs/atlas_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/atlas_defconfig	2006-07-15 22:34:41.620893663 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/atlas_defconfig	2006-07-15 22:34:46.781453833 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:50:55 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 09:59:39 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 CONFIG_MIPS_ATLAS=y
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -65,6 +68,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_MIPS_BONITO64=y
@@ -125,7 +129,11 @@
 CONFIG_BOARD_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
+CONFIG_SYS_SUPPORTS_MULTITHREADING=y
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -141,6 +149,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 CONFIG_HZ_100=y
 # CONFIG_HZ_128 is not set
@@ -153,6 +162,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -184,10 +194,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -289,6 +301,8 @@
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -336,7 +350,10 @@
 CONFIG_INET6_IPCOMP=m
 CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
+CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 CONFIG_BRIDGE_NETFILTER=y
@@ -353,6 +370,8 @@
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
@@ -368,9 +387,11 @@
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
@@ -380,6 +401,7 @@
 CONFIG_IP_NF_CONNTRACK=m
 CONFIG_IP_NF_CT_ACCT=y
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_SECMARK=y
 CONFIG_IP_NF_CONNTRACK_EVENTS=y
 CONFIG_IP_NF_CONNTRACK_NETLINK=m
 CONFIG_IP_NF_CT_PROTO_SCTP=m
@@ -390,6 +412,7 @@
 CONFIG_IP_NF_AMANDA=m
 CONFIG_IP_NF_PPTP=m
 CONFIG_IP_NF_H323=m
+CONFIG_IP_NF_SIP=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
@@ -420,6 +443,7 @@
 CONFIG_IP_NF_NAT_AMANDA=m
 CONFIG_IP_NF_NAT_PPTP=m
 CONFIG_IP_NF_NAT_H323=m
+CONFIG_IP_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -581,6 +605,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -699,6 +724,7 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -727,9 +753,8 @@
 CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
+CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_RAID6=m
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
@@ -785,6 +810,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -847,6 +874,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -928,6 +956,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -959,6 +988,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -1007,6 +1037,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -1016,6 +1047,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -1079,6 +1111,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1104,7 +1149,6 @@
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
@@ -1113,6 +1157,7 @@
 CONFIG_MINIX_FS=m
 CONFIG_ROMFS_FS=m
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
@@ -1170,6 +1215,8 @@
 # CONFIG_QNX4FS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
 
 #
 # Network File Systems
@@ -1194,6 +1241,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1259,6 +1307,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -1317,3 +1366,10 @@
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_RIO=n
+CONFIG_I2C_OCORES=n
+CONFIG_DEBUG_RT_MUTEXES=n
+CONFIG_RT_MUTEX_TESTER=n
+CONFIG_DEBUG_RWSEMS=n
+CONFIG_DEBUG_LOCKING_API_SELFTESTS=n
diff -urN linux-2.6.18-rc1/arch/mips/configs/bigsur_defconfig linux-2.6.18-rc2/arch/mips/configs/bigsur_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/bigsur_defconfig	2006-07-15 22:34:41.620893663 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/bigsur_defconfig	2006-07-15 22:34:46.785454267 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:50:55 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:02:58 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -81,6 +84,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_COHERENT=y
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
@@ -128,11 +132,15 @@
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_SIBYTE_DMA_PAGEOPS is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -143,6 +151,10 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_SMP=y
+CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_NR_CPUS=4
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -152,12 +164,11 @@
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
 CONFIG_HZ=1000
-CONFIG_SMP=y
-CONFIG_NR_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_PREEMPT_BKL is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -192,10 +203,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -253,7 +266,7 @@
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-CONFIG_BUILD_ELF64=y
+# CONFIG_BUILD_ELF64 is not set
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
 CONFIG_MIPS32_O32=y
@@ -292,6 +305,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -299,6 +314,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
 #
@@ -353,6 +369,7 @@
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -505,6 +522,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -572,6 +590,7 @@
 # CONFIG_N_HDLC is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
+# CONFIG_RIO is not set
 # CONFIG_STALDRV is not set
 CONFIG_SIBYTE_SB1250_DUART=y
 CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
@@ -598,6 +617,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -643,6 +663,7 @@
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
@@ -680,7 +701,6 @@
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -696,6 +716,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -705,6 +726,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -762,6 +784,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -779,6 +814,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -844,6 +880,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -870,14 +907,19 @@
 #
 CONFIG_PRINTK_TIME=y
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
@@ -940,3 +982,4 @@
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/capcella_defconfig linux-2.6.18-rc2/arch/mips/configs/capcella_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/capcella_defconfig	2006-07-15 22:34:41.620893663 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/capcella_defconfig	2006-07-15 22:34:46.785454267 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Tue Apr 25 00:08:06 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:03:24 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 CONFIG_MACH_VR41XX=y
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -73,6 +76,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -117,7 +121,10 @@
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -130,6 +137,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -142,6 +150,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -173,10 +182,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -268,6 +279,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -275,6 +288,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
 #
@@ -328,6 +342,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -446,6 +461,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -512,6 +529,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -581,6 +599,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -609,6 +628,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -658,6 +678,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -667,6 +688,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -738,13 +760,30 @@
 CONFIG_RTC_INTF_SYSFS=y
 CONFIG_RTC_INTF_PROC=y
 CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
 
 #
 # RTC drivers
 #
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 CONFIG_RTC_DRV_VR41XX=y
 # CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
 
 #
 # File systems
@@ -761,6 +800,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -827,6 +867,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -853,6 +894,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -881,3 +923,4 @@
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/cobalt_defconfig linux-2.6.18-rc2/arch/mips/configs/cobalt_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/cobalt_defconfig	2006-07-15 22:34:41.620893663 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/cobalt_defconfig	2006-07-15 22:34:46.785454267 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:50:57 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:03:25 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 CONFIG_MIPS_COBALT=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -66,6 +69,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_I8259=y
@@ -113,7 +117,10 @@
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -127,6 +134,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -139,6 +147,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -170,10 +179,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -256,6 +267,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -263,6 +276,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
 #
@@ -322,6 +336,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -471,6 +486,8 @@
 CONFIG_QSEMI_PHY=y
 CONFIG_LXT_PHY=y
 CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
 
 #
 # Ethernet (10 or 100Mbit)
@@ -522,6 +539,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -599,6 +617,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -630,6 +649,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_RTC=y
 CONFIG_COBALT_LCD=y
 # CONFIG_DTLK is not set
@@ -678,6 +698,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -687,6 +708,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -750,6 +772,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -767,6 +802,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -829,6 +865,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -855,6 +892,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -896,7 +934,6 @@
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -911,3 +948,4 @@
 CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/db1000_defconfig linux-2.6.18-rc2/arch/mips/configs/db1000_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/db1000_defconfig	2006-07-15 22:34:41.620893663 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/db1000_defconfig	2006-07-15 22:34:46.785454267 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:50:57 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:03:33 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -65,6 +68,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -112,7 +116,10 @@
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -128,6 +135,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -140,6 +148,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -171,14 +180,15 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -276,6 +286,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -288,6 +300,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -302,6 +315,7 @@
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
@@ -312,8 +326,10 @@
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
@@ -383,6 +399,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -532,7 +549,7 @@
 #
 # PHY device support
 #
-CONFIG_PHYLIB=m
+CONFIG_PHYLIB=y
 
 #
 # MII PHY device drivers
@@ -542,6 +559,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -653,6 +672,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_AU1X00_GPIO is not set
 # CONFIG_TS_AU1X00_ADS7846 is not set
@@ -686,6 +706,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -739,6 +760,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -748,6 +770,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -810,6 +833,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -837,6 +873,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
@@ -906,6 +943,7 @@
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -971,6 +1009,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -1030,3 +1069,4 @@
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/db1100_defconfig linux-2.6.18-rc2/arch/mips/configs/db1100_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/db1100_defconfig	2006-07-15 22:34:41.624894097 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/db1100_defconfig	2006-07-15 22:34:46.785454267 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:50:58 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:03:34 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -65,6 +68,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -112,7 +116,10 @@
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -128,6 +135,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -140,6 +148,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -171,14 +180,15 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -265,6 +275,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -277,6 +289,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -291,6 +304,7 @@
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
@@ -301,8 +315,10 @@
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
@@ -372,6 +388,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -521,7 +538,7 @@
 #
 # PHY device support
 #
-CONFIG_PHYLIB=m
+CONFIG_PHYLIB=y
 
 #
 # MII PHY device drivers
@@ -531,6 +548,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -629,6 +648,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_AU1X00_GPIO is not set
 # CONFIG_TS_AU1X00_ADS7846 is not set
@@ -661,6 +681,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -707,6 +728,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -716,12 +738,13 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_S1D13XXX is not set
@@ -810,6 +833,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -837,6 +873,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
@@ -906,6 +943,7 @@
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -971,6 +1009,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -1030,3 +1069,4 @@
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/db1200_defconfig linux-2.6.18-rc2/arch/mips/configs/db1200_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/db1200_defconfig	2006-07-15 22:34:41.624894097 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/db1200_defconfig	2006-07-15 22:34:46.785454267 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:50:58 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:03:43 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 CONFIG_MIPS_DB1200=y
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -65,6 +68,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_COHERENT=y
 CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -112,7 +116,10 @@
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -128,6 +135,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -140,6 +148,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -172,14 +181,15 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -272,6 +282,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -284,6 +296,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -296,6 +309,7 @@
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
@@ -306,8 +320,10 @@
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
@@ -371,6 +387,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -451,6 +468,7 @@
 #
 CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_AU1550 is not set
 # CONFIG_MTD_NAND_DISKONCHIP is not set
@@ -691,6 +709,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_AU1X00_GPIO is not set
 # CONFIG_TS_AU1X00_ADS7846 is not set
@@ -724,6 +743,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -761,7 +781,6 @@
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -777,6 +796,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -786,12 +806,13 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_S1D13XXX is not set
@@ -881,6 +902,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -907,6 +941,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -959,6 +994,7 @@
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
 # CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -988,6 +1024,7 @@
 CONFIG_SMB_FS=y
 # CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1053,6 +1090,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -1088,3 +1126,4 @@
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/db1500_defconfig linux-2.6.18-rc2/arch/mips/configs/db1500_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/db1500_defconfig	2006-07-15 22:34:41.624894097 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/db1500_defconfig	2006-07-15 22:34:46.785454267 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:50:59 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:03:56 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -65,6 +68,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
@@ -114,7 +118,10 @@
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -130,6 +137,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -142,6 +150,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -173,14 +182,15 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -283,6 +293,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -295,6 +307,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -309,6 +322,7 @@
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
@@ -319,8 +333,10 @@
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
@@ -390,6 +406,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -576,7 +593,7 @@
 #
 # PHY device support
 #
-CONFIG_PHYLIB=m
+CONFIG_PHYLIB=y
 
 #
 # MII PHY device drivers
@@ -586,6 +603,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -630,6 +649,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -753,6 +773,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -808,6 +829,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -818,6 +840,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -873,6 +896,18 @@
 # CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -916,6 +951,8 @@
 #
 # PCMCIA devices
 #
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
 
 #
 # Open Sound System
@@ -1030,10 +1067,12 @@
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 CONFIG_USB_LD=m
 
 #
@@ -1078,6 +1117,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1105,6 +1157,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
@@ -1174,6 +1227,7 @@
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1239,6 +1293,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -1298,3 +1353,4 @@
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/db1550_defconfig linux-2.6.18-rc2/arch/mips/configs/db1550_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/db1550_defconfig	2006-07-15 22:34:41.624894097 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/db1550_defconfig	2006-07-15 22:34:46.789454701 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:00 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:03:59 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 CONFIG_MIPS_DB1550=y
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -65,6 +68,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
@@ -113,7 +117,10 @@
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -129,6 +136,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -141,6 +149,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -172,14 +181,15 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -282,6 +292,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -294,6 +306,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -308,6 +321,7 @@
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
@@ -318,8 +332,10 @@
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
@@ -389,6 +405,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -470,6 +487,7 @@
 #
 CONFIG_MTD_NAND=m
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
 CONFIG_MTD_NAND_IDS=m
 CONFIG_MTD_NAND_AU1550=m
 # CONFIG_MTD_NAND_DISKONCHIP is not set
@@ -608,7 +626,7 @@
 #
 # PHY device support
 #
-CONFIG_PHYLIB=m
+CONFIG_PHYLIB=y
 
 #
 # MII PHY device drivers
@@ -618,6 +636,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -662,6 +682,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -793,6 +814,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -848,6 +870,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -857,6 +880,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -914,6 +938,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -941,6 +978,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
@@ -1010,6 +1048,7 @@
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1075,6 +1114,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -1134,3 +1174,4 @@
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/ddb5477_defconfig linux-2.6.18-rc2/arch/mips/configs/ddb5477_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/ddb5477_defconfig	2006-07-15 22:34:41.624894097 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/ddb5477_defconfig	2006-07-15 22:34:46.789454701 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:01 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:00 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -66,6 +69,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_I8259=y
@@ -113,7 +117,10 @@
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -127,6 +134,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -139,6 +147,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -170,10 +179,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -259,6 +270,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -266,6 +279,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
 #
@@ -325,6 +339,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -422,6 +437,8 @@
 CONFIG_QSEMI_PHY=y
 CONFIG_LXT_PHY=y
 CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
 
 #
 # Ethernet (10 or 100Mbit)
@@ -484,6 +501,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -561,6 +579,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -592,6 +611,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -640,6 +660,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -649,6 +670,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -712,6 +734,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -726,6 +761,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
@@ -792,6 +828,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -818,6 +855,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -859,7 +897,6 @@
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -874,3 +911,4 @@
 CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/decstation_defconfig linux-2.6.18-rc2/arch/mips/configs/decstation_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/decstation_defconfig	2006-07-15 22:34:41.624894097 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/decstation_defconfig	2006-07-15 22:34:46.789454701 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:01 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:01 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 CONFIG_MACH_DECSTATION=y
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -66,6 +69,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -112,7 +116,10 @@
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_WB=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -126,6 +133,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_128=y
@@ -140,6 +148,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -172,10 +181,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -244,6 +255,8 @@
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -262,6 +275,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -269,6 +284,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
 #
@@ -329,6 +345,7 @@
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -448,6 +465,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -537,6 +556,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -582,6 +602,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -591,12 +612,13 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_S1D13XXX is not set
@@ -669,6 +691,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -686,6 +721,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -732,6 +768,8 @@
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 CONFIG_UFS_FS=y
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
 
 #
 # Network File Systems
@@ -751,6 +789,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -792,14 +831,19 @@
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
@@ -862,3 +906,4 @@
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/e55_defconfig linux-2.6.18-rc2/arch/mips/configs/e55_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/e55_defconfig	2006-07-15 22:34:41.624894097 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/e55_defconfig	2006-07-15 22:34:46.789454701 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Tue Apr 25 00:08:20 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:02 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 CONFIG_MACH_VR41XX=y
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -71,6 +74,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -115,7 +119,10 @@
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -128,6 +135,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -140,6 +148,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -169,10 +178,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -244,6 +255,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -378,6 +390,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -418,6 +431,7 @@
 # CONFIG_PCWATCHDOG is not set
 # CONFIG_MIXCOMWD is not set
 # CONFIG_WDT is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -449,7 +463,6 @@
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -465,6 +478,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -473,6 +487,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -535,6 +550,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -548,6 +576,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -616,6 +645,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -644,3 +674,4 @@
 # CONFIG_CRC16 is not set
 # CONFIG_CRC32 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/emma2rh_defconfig linux-2.6.18-rc2/arch/mips/configs/emma2rh_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/emma2rh_defconfig	2006-07-15 22:34:41.624894097 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/emma2rh_defconfig	2006-07-15 22:34:46.789454701 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17
-# Sun Jun 18 13:46:53 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:05 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -133,6 +134,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -146,6 +148,7 @@
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_PREEMPT_BKL=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -180,14 +183,15 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -283,6 +287,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -300,7 +306,10 @@
 # CONFIG_INET6_IPCOMP is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
 # CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -378,6 +387,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -545,6 +555,7 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -663,6 +674,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -770,6 +782,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_RTC=m
 CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
@@ -814,6 +827,7 @@
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
@@ -850,13 +864,13 @@
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -885,10 +899,12 @@
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
@@ -913,6 +929,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -970,6 +987,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -988,7 +1018,6 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
@@ -997,6 +1026,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
@@ -1047,6 +1077,7 @@
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
 # CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -1086,6 +1117,7 @@
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1151,6 +1183,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -1205,3 +1238,4 @@
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/ev64120_defconfig linux-2.6.18-rc2/arch/mips/configs/ev64120_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/ev64120_defconfig	2006-07-15 22:34:41.628894532 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/ev64120_defconfig	2006-07-15 22:34:46.793455136 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:02 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:05 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 CONFIG_MIPS_EV64120=y
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -66,6 +69,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_CPU_BIG_ENDIAN=y
@@ -114,7 +118,10 @@
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -129,6 +136,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -141,6 +149,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -172,10 +181,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -265,6 +276,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -272,6 +285,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
 #
@@ -331,6 +345,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -427,6 +442,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -469,6 +486,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -554,6 +572,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -585,6 +604,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -633,6 +653,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -642,6 +663,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -705,6 +727,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -719,6 +754,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -782,6 +818,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -808,6 +845,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -863,3 +901,4 @@
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/ev96100_defconfig linux-2.6.18-rc2/arch/mips/configs/ev96100_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/ev96100_defconfig	2006-07-15 22:34:41.628894532 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/ev96100_defconfig	2006-07-15 22:34:46.793455136 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:03 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:05 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -65,6 +68,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_CPU_BIG_ENDIAN=y
@@ -117,7 +121,10 @@
 CONFIG_BOARD_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -133,6 +140,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -145,6 +153,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -176,10 +185,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -268,6 +279,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -275,6 +288,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
 #
@@ -334,6 +348,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -418,6 +433,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -507,6 +524,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -536,6 +554,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -582,6 +601,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -591,6 +611,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -652,6 +673,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -666,6 +700,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -729,6 +764,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -755,6 +791,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -810,3 +847,4 @@
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/excite_defconfig linux-2.6.18-rc2/arch/mips/configs/excite_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/excite_defconfig	2006-07-15 22:34:41.628894532 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/excite_defconfig	2006-07-15 22:34:46.793455136 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc4
-# Thu Feb 23 13:15:27 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:09 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,8 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+CONFIG_BASLER_EXCITE=y
+# CONFIG_BASLER_EXCITE_PROTOTYPE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +34,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -41,14 +44,11 @@
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
-CONFIG_BASLER_EXCITE=y
-# CONFIG_BASLER_EXCITE_PROTOTYPE is not set
-# CONFIG_DDB5074 is not set
-# CONFIG_DDB5476 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -66,9 +66,11 @@
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_COHERENT=y
-CONFIG_SERIAL_RM9000=y
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
@@ -115,9 +117,11 @@
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -132,6 +136,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -141,11 +146,11 @@
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
 CONFIG_HZ=1000
-# CONFIG_SMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_PREEMPT_BKL=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -167,6 +172,7 @@
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_EMBEDDED=y
@@ -177,14 +183,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -195,7 +199,6 @@
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
@@ -204,6 +207,8 @@
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -223,7 +228,6 @@
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
 CONFIG_MMU=y
 
 #
@@ -255,6 +259,8 @@
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -271,12 +277,18 @@
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
 #
@@ -330,6 +342,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -389,7 +402,6 @@
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -404,11 +416,9 @@
 #
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_BASLER_EXCITE=y
-# CONFIG_MTD_NAND_BASLER_EXCITE_RDNBY is not set
-# CONFIG_MTD_NAND_BASLER_EXCITE_PERF is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 
 #
@@ -439,7 +449,7 @@
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
@@ -496,6 +506,7 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -503,7 +514,6 @@
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
@@ -574,8 +584,6 @@
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
-# CONFIG_TITAN_GE is not set
-CONFIG_RM9K_GE=m
 
 #
 # Ethernet (10000 Mbit)
@@ -583,6 +591,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -656,6 +665,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -663,6 +673,7 @@
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 CONFIG_SERIAL_8250_EXTENDED=y
@@ -695,7 +706,6 @@
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_WDT_RM9K_GPI=m
 
 #
 # PCI-based Watchdog Cards
@@ -707,6 +717,7 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -739,7 +750,6 @@
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -752,27 +762,27 @@
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -784,7 +794,6 @@
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
 # CONFIG_FB_RADEON is not set
 # CONFIG_FB_ATY128 is not set
 # CONFIG_FB_ATY is not set
@@ -797,7 +806,6 @@
 # CONFIG_FB_SMIVGX is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_VIRTUAL is not set
-CONFIG_FB_DD=y
 
 #
 # Console display driver support
@@ -826,6 +834,7 @@
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -843,6 +852,7 @@
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
@@ -895,9 +905,7 @@
 # CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -912,15 +920,6 @@
 # CONFIG_USB_MICROTEK is not set
 
 #
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -946,15 +945,15 @@
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
-CONFIG_USB_ARTTFT=m
-# CONFIG_USB_ARTTOUCH is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
@@ -974,23 +973,44 @@
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
 #
+# CONFIG_DMA_ENGINE is not set
 
 #
-# EDAC - error detection and reporting (RAS)
+# DMA Clients
 #
 
 #
-# eXcite frame capture support
+# DMA Devices
 #
-CONFIG_EXCITE_FCAP=m
-CONFIG_EXCITE_FCAP_GPI=m
 
 #
 # File systems
@@ -1007,6 +1027,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
@@ -1038,7 +1059,6 @@
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1056,6 +1076,7 @@
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
 # CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -1085,6 +1106,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1165,8 +1187,10 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -1218,3 +1242,4 @@
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/ip22_defconfig linux-2.6.18-rc2/arch/mips/configs/ip22_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/ip22_defconfig	2006-07-15 22:34:41.628894532 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/ip22_defconfig	2006-07-15 22:34:46.793455136 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:50:54 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:10 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 CONFIG_SGI_IP22=y
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -65,6 +68,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARC=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -119,7 +123,10 @@
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_BOARD_SCACHE=y
 CONFIG_IP22_CPU_SCACHE=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -134,6 +141,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -146,6 +154,7 @@
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -178,10 +187,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -272,6 +283,8 @@
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -319,7 +332,10 @@
 CONFIG_INET6_IPCOMP=m
 CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
+CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -335,6 +351,8 @@
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
@@ -349,9 +367,11 @@
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
@@ -361,6 +381,7 @@
 CONFIG_IP_NF_CONNTRACK=m
 CONFIG_IP_NF_CT_ACCT=y
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_SECMARK=y
 CONFIG_IP_NF_CONNTRACK_EVENTS=y
 CONFIG_IP_NF_CONNTRACK_NETLINK=m
 # CONFIG_IP_NF_CT_PROTO_SCTP is not set
@@ -371,6 +392,7 @@
 CONFIG_IP_NF_AMANDA=m
 CONFIG_IP_NF_PPTP=m
 CONFIG_IP_NF_H323=m
+CONFIG_IP_NF_SIP=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
@@ -401,6 +423,7 @@
 CONFIG_IP_NF_NAT_AMANDA=m
 CONFIG_IP_NF_NAT_PPTP=m
 CONFIG_IP_NF_NAT_H323=m
+CONFIG_IP_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -533,6 +556,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -652,6 +676,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -749,6 +775,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -781,6 +808,7 @@
 #
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_INDYDOG=m
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 CONFIG_SGI_DS1286=m
 # CONFIG_GEN_RTC is not set
@@ -829,6 +857,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -838,6 +867,7 @@
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
 
 #
@@ -910,6 +940,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=m
@@ -926,7 +969,6 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 # CONFIG_XFS_POSIX_ACL is not set
@@ -935,6 +977,7 @@
 CONFIG_MINIX_FS=m
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=m
@@ -991,6 +1034,8 @@
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
 
 #
 # Network File Systems
@@ -1020,7 +1065,9 @@
 CONFIG_SMB_NLS_REMOTE="cp437"
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
 # CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
@@ -1103,6 +1150,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -1162,3 +1210,4 @@
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/ip27_defconfig linux-2.6.18-rc2/arch/mips/configs/ip27_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/ip27_defconfig	2006-07-15 22:34:41.628894532 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/ip27_defconfig	2006-07-15 22:34:46.793455136 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:04 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:10 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 CONFIG_SGI_IP27=y
 # CONFIG_SGI_IP32 is not set
@@ -61,16 +64,17 @@
 # CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_SGI_SN_M_MODE=y
 # CONFIG_SGI_SN_N_MODE is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_NUMA=y
 # CONFIG_MAPPED_KERNEL is not set
 # CONFIG_REPLICATE_KTEXT is not set
 # CONFIG_REPLICATE_EXHANDLERS is not set
+CONFIG_EARLY_PRINTK=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARC=y
 CONFIG_DMA_IP27=y
 CONFIG_CPU_BIG_ENDIAN=y
@@ -117,12 +121,19 @@
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NUMA=y
+CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_NODES_SHIFT=6
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
@@ -133,6 +144,11 @@
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_RESOURCES_64BIT=y
+CONFIG_SMP=y
+CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_NR_CPUS=64
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -142,14 +158,12 @@
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
 CONFIG_HZ=1000
-CONFIG_MIGRATION=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=64
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_PREEMPT_BKL=y
 # CONFIG_MIPS_INSANE_LARGE is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -183,10 +197,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -283,6 +299,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -290,6 +308,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
 #
@@ -387,6 +406,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -479,6 +499,7 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -502,9 +523,8 @@
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
+CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_RAID6=m
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
@@ -560,6 +580,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -567,8 +589,6 @@
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SGI_IOC3_ETH=y
-CONFIG_SGI_IOC3_ETH_HW_RX_CSUM=y
-CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -605,6 +625,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -695,6 +716,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 CONFIG_SGI_IP27_RTC=y
 # CONFIG_GEN_RTC is not set
@@ -744,6 +766,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -753,6 +776,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -810,6 +834,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -836,6 +873,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_QUOTACTL=y
 CONFIG_DNOTIFY=y
@@ -903,6 +941,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -944,6 +983,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=15
 # CONFIG_DEBUG_FS is not set
@@ -999,3 +1039,4 @@
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/ip32_defconfig linux-2.6.18-rc2/arch/mips/configs/ip32_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/ip32_defconfig	2006-07-15 22:34:41.628894532 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/ip32_defconfig	2006-07-15 22:34:46.793455136 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:05 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:11 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 CONFIG_SGI_IP32=y
@@ -65,6 +68,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARC=y
 CONFIG_DMA_IP32=y
 CONFIG_DMA_NONCOHERENT=y
@@ -120,7 +124,10 @@
 CONFIG_BOARD_SCACHE=y
 CONFIG_R5000_CPU_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -134,6 +141,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -146,6 +154,7 @@
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -178,10 +187,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -270,6 +281,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -277,6 +290,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
 #
@@ -336,6 +350,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -434,6 +449,7 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -498,6 +514,8 @@
 CONFIG_QSEMI_PHY=y
 CONFIG_LXT_PHY=y
 CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
 
 #
 # Ethernet (10 or 100Mbit)
@@ -541,6 +559,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -620,6 +639,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -651,6 +671,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -699,6 +720,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -708,6 +730,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -771,6 +794,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -785,6 +821,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -850,6 +887,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -887,6 +925,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -928,7 +967,6 @@
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -943,3 +981,4 @@
 CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/it8172_defconfig linux-2.6.18-rc2/arch/mips/configs/it8172_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/it8172_defconfig	2006-07-15 22:34:41.628894532 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/it8172_defconfig	2006-07-15 22:34:46.797455570 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:05 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:11 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -66,6 +69,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -114,7 +118,10 @@
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -128,6 +135,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -140,6 +148,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -172,14 +181,15 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -266,6 +276,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -273,6 +285,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
 #
@@ -332,6 +345,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -513,6 +527,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -601,6 +617,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_QTRONIX_KEYBOARD is not set
 # CONFIG_IT8172_SCR0 is not set
@@ -634,6 +651,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -680,6 +698,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -689,6 +708,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -763,6 +783,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -777,6 +810,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -842,6 +876,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -868,6 +903,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -923,3 +959,4 @@
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/ivr_defconfig linux-2.6.18-rc2/arch/mips/configs/ivr_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/ivr_defconfig	2006-07-15 22:34:41.628894532 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/ivr_defconfig	2006-07-15 22:34:46.797455570 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:06 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:12 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -65,6 +68,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -111,7 +115,10 @@
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -125,6 +132,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -137,6 +145,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -169,10 +178,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -263,6 +274,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -270,6 +283,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
 #
@@ -329,6 +343,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -447,6 +462,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -489,6 +506,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -566,6 +584,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 CONFIG_QTRONIX_KEYBOARD=y
 CONFIG_IT8172_SCR0=y
@@ -600,6 +619,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -647,6 +667,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -656,6 +677,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -719,6 +741,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -733,6 +768,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -796,6 +832,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -822,6 +859,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -877,3 +915,4 @@
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/jaguar-atx_defconfig linux-2.6.18-rc2/arch/mips/configs/jaguar-atx_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/jaguar-atx_defconfig	2006-07-15 22:34:41.628894532 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/jaguar-atx_defconfig	2006-07-15 22:34:46.797455570 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:06 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:12 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 CONFIG_MOMENCO_JAGUAR_ATX=y
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -66,6 +69,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_LIMITED_DMA=y
@@ -120,7 +124,10 @@
 CONFIG_BOARD_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -134,6 +141,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -143,10 +151,10 @@
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
 CONFIG_HZ=1000
-# CONFIG_SMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -177,10 +185,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -267,6 +277,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -279,7 +291,10 @@
 CONFIG_INET6_IPCOMP=m
 CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -315,6 +330,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -409,6 +425,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -430,6 +448,7 @@
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_DGRS is not set
 CONFIG_EEPRO100=y
@@ -470,6 +489,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -547,6 +567,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -593,6 +614,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -602,6 +624,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -658,6 +681,19 @@
 #
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
@@ -669,6 +705,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -721,6 +758,7 @@
 CONFIG_SUNRPC=y
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 
@@ -740,6 +778,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -795,3 +834,4 @@
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/jmr3927_defconfig linux-2.6.18-rc2/arch/mips/configs/jmr3927_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/jmr3927_defconfig	2006-07-15 22:34:41.628894532 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/jmr3927_defconfig	2006-07-15 22:34:46.797455570 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:07 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:12 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -65,6 +68,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_CPU_BIG_ENDIAN=y
@@ -110,7 +114,10 @@
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -123,6 +130,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -136,6 +144,7 @@
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_RTC_DS1742=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -167,10 +176,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -256,6 +267,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -263,6 +276,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
 #
@@ -322,6 +336,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -419,6 +434,8 @@
 CONFIG_QSEMI_PHY=y
 CONFIG_LXT_PHY=y
 CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
 
 #
 # Ethernet (10 or 100Mbit)
@@ -461,6 +478,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -538,6 +556,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
@@ -582,6 +601,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -630,6 +650,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -639,12 +660,13 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 CONFIG_FB=y
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -737,6 +759,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
@@ -749,6 +784,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -812,6 +848,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -838,6 +875,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -879,7 +917,6 @@
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -894,3 +931,4 @@
 CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/lasat200_defconfig linux-2.6.18-rc2/arch/mips/configs/lasat200_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/lasat200_defconfig	2006-07-15 22:34:41.628894532 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/lasat200_defconfig	2006-07-15 22:34:46.797455570 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:07 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:12 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -69,6 +72,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_MIPS_NILE4=y
@@ -117,7 +121,10 @@
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_BOARD_SCACHE=y
 CONFIG_R5000_CPU_SCACHE=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -132,6 +139,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -144,6 +152,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -175,14 +184,15 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -266,6 +276,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -273,6 +285,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
 #
@@ -332,6 +345,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -555,6 +569,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -597,6 +613,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -674,6 +691,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -705,6 +723,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -753,6 +772,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -762,6 +782,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -825,6 +846,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -845,6 +879,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -911,6 +946,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -937,6 +973,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -992,3 +1029,4 @@
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/malta_defconfig linux-2.6.18-rc2/arch/mips/configs/malta_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/malta_defconfig	2006-07-15 22:34:41.628894532 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/malta_defconfig	2006-07-15 22:34:46.797455570 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:08 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:13 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 CONFIG_MIPS_MALTA=y
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -65,6 +68,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -126,19 +130,21 @@
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_BOARD_SCACHE=y
+CONFIG_MIPS_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT=y
+# CONFIG_MIPS_MT_DISABLED is not set
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
 CONFIG_MIPS_VPE_LOADER=y
+CONFIG_MIPS_MT=y
+CONFIG_SYS_SUPPORTS_MULTITHREADING=y
 CONFIG_MIPS_MT_FPAFF=y
 CONFIG_MIPS_VPE_LOADER_TOM=y
 CONFIG_MIPS_VPE_APSP_API=y
 CONFIG_MIPS_APSP_KSPD=y
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
-# CONFIG_CPU_MIPSR2_IRQ_VI is not set
-# CONFIG_CPU_MIPSR2_IRQ_EI is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -152,6 +158,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 CONFIG_HZ_100=y
 # CONFIG_HZ_128 is not set
@@ -164,6 +171,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -195,10 +203,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -300,6 +310,8 @@
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -347,7 +359,10 @@
 CONFIG_INET6_IPCOMP=m
 CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
+CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 CONFIG_BRIDGE_NETFILTER=y
@@ -364,6 +379,8 @@
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
@@ -379,9 +396,11 @@
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 # CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
@@ -391,6 +410,7 @@
 CONFIG_IP_NF_CONNTRACK=m
 CONFIG_IP_NF_CT_ACCT=y
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_SECMARK=y
 CONFIG_IP_NF_CONNTRACK_EVENTS=y
 CONFIG_IP_NF_CONNTRACK_NETLINK=m
 CONFIG_IP_NF_CT_PROTO_SCTP=m
@@ -401,6 +421,7 @@
 CONFIG_IP_NF_AMANDA=m
 CONFIG_IP_NF_PPTP=m
 CONFIG_IP_NF_H323=m
+CONFIG_IP_NF_SIP=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
@@ -431,6 +452,7 @@
 CONFIG_IP_NF_NAT_AMANDA=m
 CONFIG_IP_NF_NAT_PPTP=m
 CONFIG_IP_NF_NAT_H323=m
+CONFIG_IP_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -592,6 +614,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -746,6 +769,7 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -770,9 +794,8 @@
 CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
+CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_RAID6=m
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
@@ -828,6 +851,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -890,6 +915,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -968,6 +994,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -999,6 +1026,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -1046,6 +1074,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -1055,6 +1084,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -1118,6 +1148,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1143,7 +1186,6 @@
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
@@ -1152,6 +1194,7 @@
 CONFIG_MINIX_FS=m
 CONFIG_ROMFS_FS=m
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
@@ -1209,6 +1252,8 @@
 # CONFIG_QNX4FS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
 
 #
 # Network File Systems
@@ -1233,6 +1278,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1298,6 +1344,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -1356,3 +1403,4 @@
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/mipssim_defconfig linux-2.6.18-rc2/arch/mips/configs/mipssim_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/mipssim_defconfig	2006-07-15 22:34:41.632894966 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/mipssim_defconfig	2006-07-15 22:34:46.797455570 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:09 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:13 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 CONFIG_MIPS_SIM=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -65,6 +68,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -113,14 +117,10 @@
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT=y
+CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
-CONFIG_MIPS_VPE_LOADER=y
-CONFIG_MIPS_MT_FPAFF=y
-CONFIG_MIPS_VPE_LOADER_TOM=y
-CONFIG_MIPS_VPE_APSP_API=y
-CONFIG_MIPS_APSP_KSPD=y
+# CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -136,6 +136,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -148,6 +149,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -180,10 +182,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -279,6 +283,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -286,6 +292,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
 #
@@ -381,6 +388,7 @@
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -565,6 +573,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -595,7 +604,6 @@
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -611,6 +619,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -620,6 +629,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -675,6 +685,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -685,7 +708,6 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=y
 # CONFIG_INOTIFY is not set
@@ -753,6 +775,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -779,14 +802,19 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DETECT_SOFTLOCKUP is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
@@ -844,3 +872,4 @@
 CONFIG_CRC16=y
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/mpc30x_defconfig linux-2.6.18-rc2/arch/mips/configs/mpc30x_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/mpc30x_defconfig	2006-07-15 22:34:41.632894966 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/mpc30x_defconfig	2006-07-15 22:34:46.801456004 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:09 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:15 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 CONFIG_MACH_VR41XX=y
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -73,6 +76,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -117,7 +121,10 @@
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -130,6 +137,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -142,6 +150,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -173,10 +182,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -278,6 +289,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -285,6 +298,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
 #
@@ -345,6 +359,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -483,6 +498,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -531,8 +547,10 @@
 # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
 #
 # CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
 # CONFIG_HOSTAP is not set
 # CONFIG_BCM43XX is not set
+# CONFIG_ZD1211RW is not set
 CONFIG_NET_WIRELESS=y
 
 #
@@ -614,6 +632,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -639,6 +658,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -695,6 +715,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -705,6 +726,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -798,7 +820,6 @@
 CONFIG_USB_PEGASUS=m
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
-# CONFIG_USB_ZD1201 is not set
 # CONFIG_USB_MON is not set
 
 #
@@ -820,10 +841,12 @@
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
 
@@ -869,6 +892,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -883,6 +919,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
@@ -945,6 +982,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -971,6 +1009,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -1026,3 +1065,4 @@
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/ocelot_3_defconfig linux-2.6.18-rc2/arch/mips/configs/ocelot_3_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/ocelot_3_defconfig	2006-07-15 22:34:41.632894966 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/ocelot_3_defconfig	2006-07-15 22:34:46.801456004 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:10 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:15 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -65,6 +68,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_CPU_BIG_ENDIAN=y
@@ -118,7 +122,10 @@
 CONFIG_BOARD_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -134,6 +141,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -143,10 +151,10 @@
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
 CONFIG_HZ=1000
-# CONFIG_SMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -179,10 +187,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -273,6 +283,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -291,7 +303,10 @@
 # CONFIG_INET6_IPCOMP is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
 # CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -306,6 +321,7 @@
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
@@ -316,8 +332,10 @@
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
@@ -393,6 +411,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -483,6 +502,7 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -548,6 +568,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -614,6 +636,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -697,6 +720,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -728,6 +752,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -775,6 +800,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -784,12 +810,13 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 CONFIG_FB=y
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -889,6 +916,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -908,7 +948,6 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
@@ -917,6 +956,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
@@ -988,6 +1028,7 @@
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1053,6 +1094,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -1111,3 +1153,4 @@
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/ocelot_c_defconfig linux-2.6.18-rc2/arch/mips/configs/ocelot_c_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/ocelot_c_defconfig	2006-07-15 22:34:41.632894966 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/ocelot_c_defconfig	2006-07-15 22:34:46.801456004 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:10 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:16 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -65,6 +68,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_CPU_BIG_ENDIAN=y
@@ -116,7 +120,10 @@
 CONFIG_BOARD_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -131,6 +138,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -143,6 +151,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -174,10 +183,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -265,6 +276,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -272,6 +285,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
 #
@@ -331,6 +345,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -428,6 +443,8 @@
 CONFIG_QSEMI_PHY=y
 CONFIG_LXT_PHY=y
 CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
 
 #
 # Ethernet (10 or 100Mbit)
@@ -471,6 +488,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -548,6 +566,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -579,6 +598,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -627,6 +647,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -636,6 +657,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -699,6 +721,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -713,6 +748,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -779,6 +815,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -805,6 +842,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -846,7 +884,6 @@
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -861,3 +898,4 @@
 CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/ocelot_defconfig linux-2.6.18-rc2/arch/mips/configs/ocelot_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/ocelot_defconfig	2006-07-15 22:34:41.632894966 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/ocelot_defconfig	2006-07-15 22:34:46.801456004 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:11 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:16 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 CONFIG_MOMENCO_OCELOT=y
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -65,6 +68,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_CPU_BIG_ENDIAN=y
@@ -119,7 +123,10 @@
 CONFIG_BOARD_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -135,6 +142,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -147,6 +155,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -178,10 +187,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -265,6 +276,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -272,6 +285,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
 #
@@ -331,6 +345,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -416,6 +431,8 @@
 CONFIG_QSEMI_PHY=y
 CONFIG_LXT_PHY=y
 CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
 
 #
 # Ethernet (10 or 100Mbit)
@@ -504,6 +521,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -533,6 +551,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -579,6 +598,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -588,6 +608,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -649,6 +670,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -663,6 +697,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -729,6 +764,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -755,6 +791,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -796,7 +833,6 @@
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -811,3 +847,4 @@
 CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/ocelot_g_defconfig linux-2.6.18-rc2/arch/mips/configs/ocelot_g_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/ocelot_g_defconfig	2006-07-15 22:34:41.632894966 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/ocelot_g_defconfig	2006-07-15 22:34:46.801456004 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:11 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:16 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -65,6 +68,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_CPU_BIG_ENDIAN=y
@@ -119,7 +123,10 @@
 CONFIG_BOARD_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -134,6 +141,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -146,6 +154,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -177,10 +186,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -268,6 +279,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -275,6 +288,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
 #
@@ -334,6 +348,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -431,6 +446,8 @@
 CONFIG_QSEMI_PHY=y
 CONFIG_LXT_PHY=y
 CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
 
 #
 # Ethernet (10 or 100Mbit)
@@ -474,6 +491,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -551,6 +569,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -582,6 +601,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -630,6 +650,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -639,6 +660,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -702,6 +724,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -716,6 +751,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -782,6 +818,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -808,6 +845,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -849,7 +887,6 @@
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -864,3 +901,4 @@
 CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/pb1100_defconfig linux-2.6.18-rc2/arch/mips/configs/pb1100_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/pb1100_defconfig	2006-07-15 22:34:41.632894966 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/pb1100_defconfig	2006-07-15 22:34:46.801456004 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:12 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:17 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -65,6 +68,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -114,7 +118,10 @@
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -130,6 +137,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -142,6 +150,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -173,14 +182,15 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -278,6 +288,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -290,6 +302,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -304,6 +317,7 @@
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
@@ -314,8 +328,10 @@
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
@@ -385,6 +401,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -544,6 +561,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -647,6 +666,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_AU1X00_GPIO is not set
 # CONFIG_TS_AU1X00_ADS7846 is not set
@@ -680,6 +700,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -733,6 +754,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -742,6 +764,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -804,6 +827,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -831,6 +867,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
@@ -900,6 +937,7 @@
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -965,6 +1003,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -1024,3 +1063,4 @@
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/pb1500_defconfig linux-2.6.18-rc2/arch/mips/configs/pb1500_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/pb1500_defconfig	2006-07-15 22:34:41.632894966 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/pb1500_defconfig	2006-07-15 22:34:46.805456438 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:13 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:17 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -65,6 +68,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -113,7 +117,10 @@
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -129,6 +136,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -141,6 +149,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -172,14 +181,15 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -283,6 +293,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -295,6 +307,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -309,6 +322,7 @@
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
@@ -319,8 +333,10 @@
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
@@ -390,6 +406,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -604,7 +621,7 @@
 #
 # PHY device support
 #
-CONFIG_PHYLIB=m
+CONFIG_PHYLIB=y
 
 #
 # MII PHY device drivers
@@ -614,6 +631,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -658,6 +677,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -789,6 +809,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -844,6 +865,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -853,6 +875,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -910,6 +933,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -937,6 +973,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
@@ -1006,6 +1043,7 @@
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1071,6 +1109,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -1130,3 +1169,4 @@
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/pb1550_defconfig linux-2.6.18-rc2/arch/mips/configs/pb1550_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/pb1550_defconfig	2006-07-15 22:34:41.632894966 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/pb1550_defconfig	2006-07-15 22:34:46.805456438 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:13 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:17 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -65,6 +68,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
@@ -113,7 +117,10 @@
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -129,6 +136,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -141,6 +149,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -172,14 +181,15 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -283,6 +293,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -295,6 +307,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -309,6 +322,7 @@
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
@@ -319,8 +333,10 @@
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
@@ -390,6 +406,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -604,7 +621,7 @@
 #
 # PHY device support
 #
-CONFIG_PHYLIB=m
+CONFIG_PHYLIB=y
 
 #
 # MII PHY device drivers
@@ -614,6 +631,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -658,6 +677,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -781,6 +801,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -836,6 +857,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -845,6 +867,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -902,6 +925,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -929,6 +965,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
@@ -998,6 +1035,7 @@
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1063,6 +1101,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -1122,3 +1161,4 @@
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/pnx8550-jbs_defconfig linux-2.6.18-rc2/arch/mips/configs/pnx8550-jbs_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/pnx8550-jbs_defconfig	2006-07-15 22:34:41.632894966 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/pnx8550-jbs_defconfig	2006-07-15 22:34:46.805456438 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:14 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:18 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -40,12 +42,13 @@
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_V2PCI is not set
-CONFIG_PNX8550_JBS=y
+# CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
-# CONFIG_SGI_IP22 is not set
+# CONFIG_MARKEINS is not set
+CONFIG_SGI_IP22=y
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SIBYTE_BIGSUR is not set
@@ -65,19 +68,25 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARC=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_PNX8550=y
-CONFIG_SOC_PNX8550=y
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_ARC32=y
+CONFIG_BOOT_ELF32=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_ARC_CONSOLE is not set
+CONFIG_ARC_PROMLIB=y
 
 #
 # CPU selection
 #
-CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
 # CONFIG_CPU_MIPS64_R2 is not set
@@ -85,7 +94,7 @@
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
 # CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
+CONFIG_CPU_R4X00=y
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
@@ -96,11 +105,12 @@
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_HAS_CPU_R5000=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
 #
 # Kernel type
@@ -111,14 +121,17 @@
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_BOARD_SCACHE=y
+CONFIG_IP22_CPU_SCACHE=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -128,6 +141,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -140,6 +154,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -173,10 +188,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -213,9 +230,8 @@
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-# CONFIG_PCI_DEBUG is not set
+CONFIG_HW_HAS_EISA=y
+# CONFIG_EISA is not set
 CONFIG_MMU=y
 
 #
@@ -226,7 +242,6 @@
 #
 # PCI Hotplug Support
 #
-# CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
@@ -247,6 +262,8 @@
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -265,6 +282,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -272,6 +291,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
 #
@@ -326,6 +346,7 @@
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -349,16 +370,10 @@
 #
 # Block devices
 #
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
@@ -388,38 +403,8 @@
 # IDE chipset support/bugfixes
 #
 CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-CONFIG_BLK_DEV_OFFBOARD=y
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-CONFIG_BLK_DEV_HPT366=y
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
 # CONFIG_IDEDMA_AUTO is not set
 # CONFIG_BLK_DEV_HD is not set
 
@@ -459,31 +444,8 @@
 # SCSI low-level drivers
 #
 CONFIG_ISCSI_TCP=m
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SGIWD93_SCSI is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 
 #
@@ -495,19 +457,14 @@
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
 # I2O device support
 #
-# CONFIG_I2O is not set
 
 #
 # Network device support
@@ -519,11 +476,6 @@
 # CONFIG_TUN is not set
 
 #
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
 # PHY device support
 #
 # CONFIG_PHYLIB is not set
@@ -533,71 +485,20 @@
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
-CONFIG_8139TOO_TUNE_TWISTER=y
-CONFIG_8139TOO_8129=y
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_LAN_SAA9730 is not set
+# CONFIG_SGISEEQ is not set
 
 #
 # Ethernet (1000 Mbit)
 #
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
 
 #
 # Token Ring devices
 #
-# CONFIG_TR is not set
 
 #
 # Wireless LAN (non-hamradio)
@@ -608,11 +509,8 @@
 # Wan interfaces
 #
 # CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
@@ -657,7 +555,6 @@
 CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -668,6 +565,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -678,8 +576,7 @@
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_IP3106 is not set
-# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_IP22_ZILOG is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -693,16 +590,16 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
+# CONFIG_SGI_DS1286 is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
 
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
@@ -725,13 +622,13 @@
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
@@ -743,22 +640,24 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
+# CONFIG_SGI_NEWPORT_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 
 #
@@ -769,126 +668,15 @@
 #
 # USB support
 #
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-
-#
-# USB DSL modem support
-#
-
-#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -914,7 +702,6 @@
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
 
 #
 # EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
@@ -926,6 +713,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -940,6 +740,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
@@ -1011,6 +812,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1021,6 +823,7 @@
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
+CONFIG_SGI_PARTITION=y
 
 #
 # Native Language Support
@@ -1076,15 +879,20 @@
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 CONFIG_DEBUG_SLAB=y
 # CONFIG_DEBUG_SLAB_LEAK is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
@@ -1144,3 +952,4 @@
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/pnx8550-v2pci_defconfig linux-2.6.18-rc2/arch/mips/configs/pnx8550-v2pci_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/pnx8550-v2pci_defconfig	2006-07-15 22:34:41.632894966 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/pnx8550-v2pci_defconfig	2006-07-15 22:34:46.805456438 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:14 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:18 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -39,13 +41,14 @@
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-CONFIG_PNX8550_V2PCI=y
+# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
-# CONFIG_SGI_IP22 is not set
+# CONFIG_MARKEINS is not set
+CONFIG_SGI_IP22=y
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SIBYTE_BIGSUR is not set
@@ -65,19 +68,25 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARC=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_PNX8550=y
-CONFIG_SOC_PNX8550=y
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_ARC32=y
+CONFIG_BOOT_ELF32=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_ARC_CONSOLE is not set
+CONFIG_ARC_PROMLIB=y
 
 #
 # CPU selection
 #
-CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
 # CONFIG_CPU_MIPS64_R2 is not set
@@ -85,7 +94,7 @@
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_VR41XX is not set
 # CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
+CONFIG_CPU_R4X00=y
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
@@ -96,11 +105,12 @@
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_HAS_CPU_R5000=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
 #
 # Kernel type
@@ -111,14 +121,17 @@
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_BOARD_SCACHE=y
+CONFIG_IP22_CPU_SCACHE=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -128,6 +141,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -140,6 +154,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -172,10 +187,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -212,8 +229,8 @@
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
+CONFIG_HW_HAS_EISA=y
+# CONFIG_EISA is not set
 CONFIG_MMU=y
 
 #
@@ -224,7 +241,6 @@
 #
 # PCI Hotplug Support
 #
-# CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
@@ -245,6 +261,8 @@
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -263,6 +281,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -281,7 +301,10 @@
 # CONFIG_INET6_IPCOMP is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
 # CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -294,6 +317,7 @@
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
@@ -301,10 +325,13 @@
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
@@ -374,6 +401,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -397,16 +425,10 @@
 #
 # Block devices
 #
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
@@ -436,40 +458,9 @@
 # IDE chipset support/bugfixes
 #
 CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-CONFIG_BLK_DEV_CMD64X=y
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -508,36 +499,8 @@
 # SCSI low-level drivers
 #
 CONFIG_ISCSI_TCP=m
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-CONFIG_AIC7XXX_DEBUG_MASK=0
-# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SGIWD93_SCSI is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 
 #
@@ -549,19 +512,14 @@
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
 # I2O device support
 #
-# CONFIG_I2O is not set
 
 #
 # Network device support
@@ -573,11 +531,6 @@
 CONFIG_TUN=m
 
 #
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
 # PHY device support
 #
 # CONFIG_PHYLIB is not set
@@ -587,71 +540,20 @@
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-CONFIG_NATSEMI=y
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_LAN_SAA9730 is not set
+# CONFIG_SGISEEQ is not set
 
 #
 # Ethernet (1000 Mbit)
 #
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
 
 #
 # Token Ring devices
 #
-# CONFIG_TR is not set
 
 #
 # Wireless LAN (non-hamradio)
@@ -662,8 +564,6 @@
 # Wan interfaces
 #
 # CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
 # CONFIG_PPP_FILTER is not set
@@ -674,7 +574,6 @@
 CONFIG_PPP_MPPE=m
 # CONFIG_PPPOE is not set
 # CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
@@ -730,7 +629,6 @@
 CONFIG_SERIO=y
 CONFIG_SERIO_I8042=y
 CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -741,6 +639,7 @@
 CONFIG_VT=y
 # CONFIG_VT_CONSOLE is not set
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
@@ -750,7 +649,6 @@
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_RISCOM8 is not set
 # CONFIG_SPECIALIX is not set
@@ -766,8 +664,7 @@
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_IP3106 is not set
-# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_IP22_ZILOG is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -781,16 +678,16 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
+# CONFIG_SGI_DS1286 is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
 
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
@@ -811,29 +708,14 @@
 CONFIG_I2C_ALGOBIT=m
 # CONFIG_I2C_ALGOPCF is not set
 # CONFIG_I2C_ALGOPCA is not set
+# CONFIG_I2C_ALGO_SGI is not set
 
 #
 # I2C Hardware Bus support
 #
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
 # CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
 
 #
@@ -860,13 +742,13 @@
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -893,12 +775,11 @@
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
@@ -913,50 +794,33 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 CONFIG_FB=y
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
 # CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_SMIVGX is not set
-# CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
+# CONFIG_SGI_NEWPORT_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE is not set
 
@@ -974,124 +838,15 @@
 #
 # USB support
 #
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -1117,7 +872,6 @@
 #
 # InfiniBand support
 #
-# CONFIG_INFINIBAND is not set
 
 #
 # EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
@@ -1129,6 +883,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1145,7 +912,6 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
@@ -1154,6 +920,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
@@ -1226,6 +993,7 @@
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1236,6 +1004,7 @@
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
+CONFIG_SGI_PARTITION=y
 
 #
 # Native Language Support
@@ -1291,6 +1060,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -1349,3 +1119,4 @@
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/qemu_defconfig linux-2.6.18-rc2/arch/mips/configs/qemu_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/qemu_defconfig	2006-07-15 22:34:41.632894966 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/qemu_defconfig	2006-07-15 22:34:46.805456438 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:15 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:18 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 CONFIG_QEMU=y
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -65,6 +68,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_COHERENT=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_I8259=y
@@ -113,7 +117,10 @@
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -121,11 +128,12 @@
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_SMP is not set
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 CONFIG_HZ_100=y
 # CONFIG_HZ_128 is not set
@@ -138,6 +146,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -171,6 +180,7 @@
 # CONFIG_EPOLL is not set
 # CONFIG_SHMEM is not set
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
 # CONFIG_SLOB is not set
@@ -235,6 +245,8 @@
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -253,6 +265,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -260,6 +274,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -292,6 +307,7 @@
 CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -473,6 +489,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -502,6 +519,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -546,6 +564,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -555,6 +574,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -617,6 +637,19 @@
 #
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
@@ -628,6 +661,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
@@ -682,6 +716,7 @@
 CONFIG_SUNRPC=y
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 
@@ -701,6 +736,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
diff -urN linux-2.6.18-rc1/arch/mips/configs/rbhma4500_defconfig linux-2.6.18-rc2/arch/mips/configs/rbhma4500_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/rbhma4500_defconfig	2006-07-15 22:34:41.636895400 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/rbhma4500_defconfig	2006-07-15 22:34:46.805456438 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:16 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:19 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -72,6 +75,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_GENERIC_ISA_DMA=y
@@ -122,7 +126,10 @@
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -136,6 +143,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -148,6 +156,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -184,10 +193,10 @@
 # CONFIG_EPOLL is not set
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -255,6 +264,8 @@
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -274,6 +285,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -292,7 +305,10 @@
 # CONFIG_INET6_IPCOMP is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
 # CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -307,6 +323,7 @@
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
@@ -314,10 +331,13 @@
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
@@ -394,6 +414,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -624,6 +645,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -704,6 +727,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -729,7 +753,7 @@
 # CONFIG_IPW2100 is not set
 CONFIG_IPW2200=m
 # CONFIG_IPW2200_MONITOR is not set
-# CONFIG_IPW_QOS is not set
+# CONFIG_IPW2200_QOS is not set
 # CONFIG_IPW2200_DEBUG is not set
 # CONFIG_HERMES is not set
 # CONFIG_ATMEL is not set
@@ -738,8 +762,10 @@
 # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
 #
 # CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
 # CONFIG_HOSTAP is not set
 # CONFIG_BCM43XX is not set
+# CONFIG_ZD1211RW is not set
 CONFIG_NET_WIRELESS=y
 
 #
@@ -827,6 +853,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -856,6 +883,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -895,6 +923,7 @@
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
@@ -906,6 +935,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -916,12 +946,13 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -1045,7 +1076,6 @@
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
-# CONFIG_USB_ZD1201 is not set
 CONFIG_USB_MON=y
 
 #
@@ -1067,10 +1097,12 @@
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
 
 #
@@ -1115,6 +1147,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1134,7 +1179,6 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
@@ -1143,6 +1187,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
@@ -1193,6 +1238,7 @@
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
 # CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -1226,6 +1272,7 @@
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1291,6 +1338,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
diff -urN linux-2.6.18-rc1/arch/mips/configs/rm200_defconfig linux-2.6.18-rc2/arch/mips/configs/rm200_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/rm200_defconfig	2006-07-15 22:34:41.636895400 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/rm200_defconfig	2006-07-15 22:34:46.809456873 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:16 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:19 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -65,6 +68,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARC=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_DMA_NONCOHERENT=y
@@ -106,6 +110,7 @@
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
 CONFIG_SYS_HAS_CPU_R4X00=y
+CONFIG_SYS_HAS_CPU_R5000=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
@@ -120,7 +125,12 @@
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_BOARD_SCACHE=y
+CONFIG_R5000_CPU_SCACHE=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -136,6 +146,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -148,6 +159,7 @@
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -181,10 +193,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -280,6 +294,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -298,7 +314,10 @@
 CONFIG_INET6_IPCOMP=m
 CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
+CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 CONFIG_BRIDGE_NETFILTER=y
@@ -315,6 +334,8 @@
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
@@ -329,9 +350,11 @@
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
@@ -341,6 +364,7 @@
 CONFIG_IP_NF_CONNTRACK=m
 # CONFIG_IP_NF_CT_ACCT is not set
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_SECMARK=y
 CONFIG_IP_NF_CONNTRACK_EVENTS=y
 CONFIG_IP_NF_CONNTRACK_NETLINK=m
 CONFIG_IP_NF_CT_PROTO_SCTP=m
@@ -351,6 +375,7 @@
 CONFIG_IP_NF_AMANDA=m
 CONFIG_IP_NF_PPTP=m
 CONFIG_IP_NF_H323=m
+CONFIG_IP_NF_SIP=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
@@ -381,6 +406,7 @@
 CONFIG_IP_NF_NAT_AMANDA=m
 CONFIG_IP_NF_NAT_PPTP=m
 CONFIG_IP_NF_NAT_H323=m
+CONFIG_IP_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -559,6 +585,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -580,6 +607,7 @@
 # CONFIG_PARPORT_PC_SUPERIO is not set
 CONFIG_PARPORT_NOT_PC=y
 # CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
 CONFIG_PARPORT_1284=y
 
 #
@@ -699,6 +727,7 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -745,9 +774,8 @@
 CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
+CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-# CONFIG_MD_RAID6 is not set
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
@@ -803,6 +831,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -884,6 +914,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -975,6 +1006,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -1012,6 +1044,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_RTC=m
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -1045,12 +1078,13 @@
 # Dallas's 1-wire bus
 #
 CONFIG_W1=m
+CONFIG_W1_CON=y
 
 #
 # 1-wire Bus Masters
 #
 # CONFIG_W1_MASTER_MATROX is not set
-# CONFIG_W1_MASTER_DS9490 is not set
+# CONFIG_W1_MASTER_DS2490 is not set
 
 #
 # 1-wire Slaves
@@ -1073,6 +1107,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -1083,6 +1118,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -1121,6 +1157,7 @@
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
@@ -1219,6 +1256,7 @@
 CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_AIRPRIME=m
 CONFIG_USB_SERIAL_ANYDATA=m
+# CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
 CONFIG_USB_SERIAL_WHITEHEAT=m
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
@@ -1259,6 +1297,7 @@
 # CONFIG_USB_SERIAL_TI is not set
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EZUSB=y
 
@@ -1272,10 +1311,12 @@
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_LED=m
+# CONFIG_USB_CY7C63 is not set
 CONFIG_USB_CYTHERM=m
 CONFIG_USB_PHIDGETKIT=m
 CONFIG_USB_PHIDGETSERVO=m
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 CONFIG_USB_SISUSBVGA=m
 # CONFIG_USB_SISUSBVGA_CON is not set
 CONFIG_USB_LD=m
@@ -1323,6 +1364,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=m
@@ -1344,7 +1398,6 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 # CONFIG_XFS_POSIX_ACL is not set
@@ -1353,6 +1406,7 @@
 CONFIG_MINIX_FS=m
 CONFIG_ROMFS_FS=m
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_QUOTACTL=y
 CONFIG_DNOTIFY=y
@@ -1411,6 +1465,8 @@
 CONFIG_QNX4FS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
 
 #
 # Network File Systems
@@ -1437,7 +1493,9 @@
 # CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
 # CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 CONFIG_NCP_FS=m
 CONFIG_NCPFS_PACKET_SIGNING=y
@@ -1529,6 +1587,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -1588,3 +1647,4 @@
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/sb1250-swarm_defconfig linux-2.6.18-rc2/arch/mips/configs/sb1250-swarm_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/sb1250-swarm_defconfig	2006-07-15 22:34:41.636895400 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/sb1250-swarm_defconfig	2006-07-15 22:34:46.809456873 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:17 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:19 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -82,6 +85,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_COHERENT=y
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
@@ -130,12 +134,16 @@
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_SIBYTE_DMA_PAGEOPS is not set
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_SB1_PASS_1_WORKAROUNDS=y
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_SYS_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
@@ -147,6 +155,10 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_SMP=y
+CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_NR_CPUS=2
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -156,12 +168,11 @@
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
 CONFIG_HZ=1000
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_PREEMPT_BKL=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -194,10 +205,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -292,6 +305,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -299,6 +314,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
 #
@@ -358,6 +374,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -479,6 +496,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -522,6 +541,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -589,6 +609,7 @@
 # CONFIG_N_HDLC is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
+# CONFIG_RIO is not set
 # CONFIG_STALDRV is not set
 CONFIG_SIBYTE_SB1250_DUART=y
 CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
@@ -615,6 +636,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -663,6 +685,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -672,6 +695,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -729,6 +753,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -746,6 +783,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -811,6 +849,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -837,6 +876,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=15
 # CONFIG_DEBUG_FS is not set
@@ -893,3 +933,4 @@
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/sead_defconfig linux-2.6.18-rc2/arch/mips/configs/sead_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/sead_defconfig	2006-07-15 22:34:41.636895400 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/sead_defconfig	2006-07-15 22:34:46.809456873 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:17 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:20 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 CONFIG_MIPS_SEAD=y
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -65,6 +68,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -116,7 +120,10 @@
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -132,6 +139,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -144,6 +152,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -173,10 +182,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -242,6 +253,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -355,6 +367,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -385,7 +398,6 @@
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -401,6 +413,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -409,6 +422,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -464,6 +478,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -477,6 +504,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -556,6 +584,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -585,3 +614,4 @@
 CONFIG_CRC16=y
 # CONFIG_CRC32 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/tb0226_defconfig linux-2.6.18-rc2/arch/mips/configs/tb0226_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/tb0226_defconfig	2006-07-15 22:34:41.636895400 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/tb0226_defconfig	2006-07-15 22:34:46.809456873 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Tue Apr 25 00:08:41 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:20 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 CONFIG_MACH_VR41XX=y
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -75,6 +78,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -119,7 +123,10 @@
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -132,6 +139,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -144,6 +152,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -175,10 +184,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -249,6 +260,8 @@
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -274,6 +287,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -281,6 +296,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
 #
@@ -334,6 +350,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -427,6 +444,7 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -492,6 +510,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -554,6 +574,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -624,6 +645,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -652,6 +674,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -702,6 +725,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -712,6 +736,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -748,6 +773,7 @@
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
@@ -838,10 +864,12 @@
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
@@ -896,13 +924,30 @@
 CONFIG_RTC_INTF_SYSFS=y
 CONFIG_RTC_INTF_PROC=y
 CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
 
 #
 # RTC drivers
 #
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 CONFIG_RTC_DRV_VR41XX=y
 # CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
 
 #
 # File systems
@@ -919,6 +964,7 @@
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=m
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -989,6 +1035,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1015,6 +1062,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -1044,3 +1092,4 @@
 # CONFIG_CRC32 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/tb0229_defconfig linux-2.6.18-rc2/arch/mips/configs/tb0229_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/tb0229_defconfig	2006-07-15 22:34:41.636895400 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/tb0229_defconfig	2006-07-15 22:34:46.809456873 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Tue Apr 25 00:08:59 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:20 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 CONFIG_MACH_VR41XX=y
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -75,6 +78,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -119,7 +123,10 @@
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -132,6 +139,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -144,6 +152,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -175,10 +184,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -249,6 +260,8 @@
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -275,6 +288,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -282,6 +297,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
 #
@@ -335,6 +351,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -433,6 +450,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -476,6 +495,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -545,6 +565,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -573,6 +594,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -607,7 +629,6 @@
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -623,6 +644,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -633,6 +655,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -669,6 +692,7 @@
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
@@ -749,10 +773,12 @@
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
@@ -807,13 +833,30 @@
 CONFIG_RTC_INTF_SYSFS=y
 CONFIG_RTC_INTF_PROC=y
 CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
 
 #
 # RTC drivers
 #
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 CONFIG_RTC_DRV_VR41XX=y
 # CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
 
 #
 # File systems
@@ -830,6 +873,7 @@
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=m
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -900,6 +944,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -926,6 +971,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -955,3 +1001,4 @@
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/tb0287_defconfig linux-2.6.18-rc2/arch/mips/configs/tb0287_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/tb0287_defconfig	2006-07-15 22:34:41.636895400 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/tb0287_defconfig	2006-07-15 22:34:46.809456873 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Tue Apr 25 00:09:17 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:21 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 CONFIG_MACH_VR41XX=y
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -120,7 +123,10 @@
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -133,6 +139,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -145,6 +152,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -176,10 +184,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -250,6 +260,8 @@
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -276,6 +288,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_ADVANCED=y
@@ -291,9 +305,13 @@
 # CONFIG_TCP_CONG_HYBLA is not set
 # CONFIG_TCP_CONG_VEGAS is not set
 # CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_COMPOUND is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
 #
@@ -347,6 +365,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -492,6 +511,7 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -548,7 +568,6 @@
 #
 CONFIG_IEEE1394_VIDEO1394=m
 CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
 CONFIG_IEEE1394_ETH1394=m
 CONFIG_IEEE1394_DV1394=m
 CONFIG_IEEE1394_RAWIO=m
@@ -619,6 +638,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -689,6 +709,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -717,6 +738,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -751,7 +773,6 @@
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -767,6 +788,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -777,12 +799,13 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -848,6 +871,7 @@
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
@@ -943,10 +967,12 @@
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 
@@ -992,6 +1018,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1016,6 +1055,7 @@
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=m
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_QUOTACTL=y
 # CONFIG_DNOTIFY is not set
@@ -1082,6 +1122,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1108,6 +1149,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -1137,3 +1179,4 @@
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/workpad_defconfig linux-2.6.18-rc2/arch/mips/configs/workpad_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/workpad_defconfig	2006-07-15 22:34:41.636895400 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/workpad_defconfig	2006-07-15 22:34:46.813457307 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Tue Apr 25 00:09:33 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:21 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 CONFIG_MACH_VR41XX=y
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -71,6 +74,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -115,7 +119,10 @@
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -128,6 +135,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -140,6 +148,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -171,10 +180,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -273,6 +284,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -280,6 +293,7 @@
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
 #
@@ -334,6 +348,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -452,6 +467,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -586,6 +603,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -613,6 +631,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -667,6 +686,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -676,6 +696,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -738,6 +759,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -755,6 +789,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -820,6 +855,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -846,6 +882,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -874,3 +911,4 @@
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/wrppmc_defconfig linux-2.6.18-rc2/arch/mips/configs/wrppmc_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/wrppmc_defconfig	2006-07-15 22:34:41.636895400 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/wrppmc_defconfig	2006-07-15 22:34:46.813457307 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16.11
-# Fri May  5 17:11:22 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:21 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -46,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -63,7 +65,10 @@
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_CPU_BIG_ENDIAN=y
@@ -119,9 +124,11 @@
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -136,6 +143,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -148,6 +156,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -169,6 +178,7 @@
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -179,14 +189,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -197,7 +205,6 @@
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_KMOD is not set
@@ -206,6 +213,8 @@
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -225,7 +234,6 @@
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
 CONFIG_MMU=y
 
 #
@@ -260,6 +268,8 @@
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -279,12 +289,18 @@
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
 #
@@ -338,6 +354,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -434,6 +451,8 @@
 # CONFIG_QSEMI_PHY is not set
 # CONFIG_LXT_PHY is not set
 # CONFIG_CICADA_PHY is not set
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -496,6 +515,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -552,6 +572,7 @@
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=1
 CONFIG_SERIAL_8250_RUNTIME_UARTS=1
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -575,6 +596,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -606,13 +628,13 @@
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
@@ -621,13 +643,10 @@
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -637,6 +656,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -649,6 +669,7 @@
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -666,6 +687,19 @@
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
@@ -675,6 +709,24 @@
 #
 
 #
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
@@ -687,6 +739,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -715,7 +768,6 @@
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -753,6 +805,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -779,8 +832,10 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="console=ttyS0,115200n8"
 
@@ -806,3 +861,4 @@
 CONFIG_CRC16=y
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/configs/yosemite_defconfig linux-2.6.18-rc2/arch/mips/configs/yosemite_defconfig
--- linux-2.6.18-rc1/arch/mips/configs/yosemite_defconfig	2006-07-15 22:34:41.636895400 +0000
+++ linux-2.6.18-rc2/arch/mips/configs/yosemite_defconfig	2006-07-15 22:34:46.813457307 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:20 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 10:04:21 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 CONFIG_PMC_YOSEMITE=y
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -66,6 +69,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_DMA_COHERENT=y
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
@@ -114,12 +118,16 @@
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_HIGHMEM=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_SYS_SUPPORTS_HIGHMEM=y
@@ -128,6 +136,10 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_SMP=y
+CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_NR_CPUS=2
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -137,12 +149,11 @@
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
 CONFIG_HZ=1000
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_PREEMPT_BKL=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -175,10 +186,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -268,6 +281,8 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -280,7 +295,10 @@
 CONFIG_INET6_IPCOMP=m
 CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
+CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -317,6 +335,7 @@
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -411,6 +430,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
 
 #
 # Ethernet (10 or 100Mbit)
@@ -452,6 +473,7 @@
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -529,6 +551,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 CONFIG_GEN_RTC=y
 CONFIG_GEN_RTC_X=y
@@ -576,6 +599,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -585,6 +609,7 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -641,6 +666,19 @@
 #
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
@@ -652,6 +690,7 @@
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -704,6 +743,7 @@
 CONFIG_SUNRPC=y
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 
@@ -723,14 +763,19 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_INFO is not set
@@ -793,3 +838,4 @@
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/ddb5xxx/ddb5477/irq.c linux-2.6.18-rc2/arch/mips/ddb5xxx/ddb5477/irq.c
--- linux-2.6.18-rc1/arch/mips/ddb5xxx/ddb5477/irq.c	2006-07-15 22:34:41.644896269 +0000
+++ linux-2.6.18-rc2/arch/mips/ddb5xxx/ddb5477/irq.c	2006-07-15 22:34:46.821458175 +0000
@@ -74,7 +74,6 @@
 
 extern void vrc5477_irq_init(u32 base);
 extern void mips_cpu_irq_init(u32 base);
-extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
 static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL };
 
 void __init arch_init_irq(void)
diff -urN linux-2.6.18-rc1/arch/mips/ddb5xxx/ddb5477/irq_5477.c linux-2.6.18-rc2/arch/mips/ddb5xxx/ddb5477/irq_5477.c
--- linux-2.6.18-rc1/arch/mips/ddb5xxx/ddb5477/irq_5477.c	2006-07-15 22:34:41.644896269 +0000
+++ linux-2.6.18-rc2/arch/mips/ddb5xxx/ddb5477/irq_5477.c	2006-07-15 22:34:46.821458175 +0000
@@ -89,7 +89,7 @@
 		ll_vrc5477_irq_enable( irq - vrc5477_irq_base);
 }
 
-hw_irq_controller vrc5477_irq_controller = {
+struct irq_chip vrc5477_irq_controller = {
 	.typename = "vrc5477_irq",
 	.startup = vrc5477_irq_startup,
 	.shutdown = vrc5477_irq_shutdown,
diff -urN linux-2.6.18-rc1/arch/mips/ddb5xxx/ddb5477/setup.c linux-2.6.18-rc2/arch/mips/ddb5xxx/ddb5477/setup.c
--- linux-2.6.18-rc1/arch/mips/ddb5xxx/ddb5477/setup.c	2006-07-15 22:34:41.644896269 +0000
+++ linux-2.6.18-rc2/arch/mips/ddb5xxx/ddb5477/setup.c	2006-07-15 22:34:46.821458175 +0000
@@ -19,6 +19,7 @@
 #include <linux/sched.h>
 #include <linux/pci.h>
 #include <linux/ide.h>
+#include <linux/irq.h>
 #include <linux/fs.h>
 #include <linux/ioport.h>
 #include <linux/param.h>	/* for HZ */
@@ -146,9 +147,7 @@
 	mips_hpt_frequency = bus_frequency*(i+4)/4;
 }
 
-extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
-
-static void __init ddb_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
 #if defined(USE_CPU_COUNTER_TIMER)
 
@@ -178,7 +177,6 @@
 	set_io_port_base(KSEG1ADDR(DDB_PCI_IO_BASE));
 
 	board_time_init = ddb_time_init;
-	board_timer_setup = ddb_timer_setup;
 
 	_machine_restart = ddb_machine_restart;
 	_machine_halt = ddb_machine_halt;
diff -urN linux-2.6.18-rc1/arch/mips/dec/ioasic-irq.c linux-2.6.18-rc2/arch/mips/dec/ioasic-irq.c
--- linux-2.6.18-rc1/arch/mips/dec/ioasic-irq.c	2006-07-15 22:34:41.644896269 +0000
+++ linux-2.6.18-rc2/arch/mips/dec/ioasic-irq.c	2006-07-15 22:34:46.821458175 +0000
@@ -93,7 +93,7 @@
 		enable_ioasic_irq(irq);
 }
 
-static struct hw_interrupt_type ioasic_irq_type = {
+static struct irq_chip ioasic_irq_type = {
 	.typename = "IO-ASIC",
 	.startup = startup_ioasic_irq,
 	.shutdown = shutdown_ioasic_irq,
@@ -121,7 +121,7 @@
 	end_ioasic_irq(irq);
 }
 
-static struct hw_interrupt_type ioasic_dma_irq_type = {
+static struct irq_chip ioasic_dma_irq_type = {
 	.typename = "IO-ASIC-DMA",
 	.startup = startup_ioasic_dma_irq,
 	.shutdown = shutdown_ioasic_dma_irq,
diff -urN linux-2.6.18-rc1/arch/mips/dec/kn02-irq.c linux-2.6.18-rc2/arch/mips/dec/kn02-irq.c
--- linux-2.6.18-rc1/arch/mips/dec/kn02-irq.c	2006-07-15 22:34:41.644896269 +0000
+++ linux-2.6.18-rc2/arch/mips/dec/kn02-irq.c	2006-07-15 22:34:46.821458175 +0000
@@ -94,7 +94,7 @@
 		enable_kn02_irq(irq);
 }
 
-static struct hw_interrupt_type kn02_irq_type = {
+static struct irq_chip kn02_irq_type = {
 	.typename = "KN02-CSR",
 	.startup = startup_kn02_irq,
 	.shutdown = shutdown_kn02_irq,
diff -urN linux-2.6.18-rc1/arch/mips/dec/setup.c linux-2.6.18-rc2/arch/mips/dec/setup.c
--- linux-2.6.18-rc1/arch/mips/dec/setup.c	2006-07-15 22:34:41.644896269 +0000
+++ linux-2.6.18-rc2/arch/mips/dec/setup.c	2006-07-15 22:34:46.821458175 +0000
@@ -145,13 +145,11 @@
 
 
 extern void dec_time_init(void);
-extern void dec_timer_setup(struct irqaction *);
 
 void __init plat_mem_setup(void)
 {
 	board_be_init = dec_be_init;
 	board_time_init = dec_time_init;
-	board_timer_setup = dec_timer_setup;
 
 	wbflush_setup();
 
diff -urN linux-2.6.18-rc1/arch/mips/dec/time.c linux-2.6.18-rc2/arch/mips/dec/time.c
--- linux-2.6.18-rc1/arch/mips/dec/time.c	2006-07-15 22:34:41.644896269 +0000
+++ linux-2.6.18-rc2/arch/mips/dec/time.c	2006-07-15 22:34:46.821458175 +0000
@@ -186,7 +186,7 @@
 
 EXPORT_SYMBOL(do_settimeofday);
 
-void __init dec_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
 	setup_irq(dec_interrupt[DEC_IRQ_RTC], irq);
 
diff -urN linux-2.6.18-rc1/arch/mips/defconfig linux-2.6.18-rc2/arch/mips/defconfig
--- linux-2.6.18-rc1/arch/mips/defconfig	2006-07-15 22:34:41.644896269 +0000
+++ linux-2.6.18-rc2/arch/mips/defconfig	2006-07-15 22:34:46.821458175 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:50:54 2006
+# Linux kernel version: 2.6.18-rc1
+# Thu Jul  6 09:49:33 2006
 #
 CONFIG_MIPS=y
 
@@ -21,6 +21,7 @@
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
+# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
@@ -32,6 +33,7 @@
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
@@ -45,6 +47,7 @@
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
 CONFIG_SGI_IP22=y
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -65,6 +68,7 @@
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARC=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -119,7 +123,10 @@
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_BOARD_SCACHE=y
 CONFIG_IP22_CPU_SCACHE=y
-# CONFIG_MIPS_MT is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -134,6 +141,7 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -146,6 +154,7 @@
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -178,10 +187,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -272,6 +283,8 @@
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -319,7 +332,10 @@
 CONFIG_INET6_IPCOMP=m
 CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
+CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -335,6 +351,8 @@
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
@@ -349,9 +367,11 @@
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
@@ -361,6 +381,7 @@
 CONFIG_IP_NF_CONNTRACK=m
 CONFIG_IP_NF_CT_ACCT=y
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_SECMARK=y
 CONFIG_IP_NF_CONNTRACK_EVENTS=y
 CONFIG_IP_NF_CONNTRACK_NETLINK=m
 # CONFIG_IP_NF_CT_PROTO_SCTP is not set
@@ -371,6 +392,7 @@
 CONFIG_IP_NF_AMANDA=m
 CONFIG_IP_NF_PPTP=m
 CONFIG_IP_NF_H323=m
+CONFIG_IP_NF_SIP=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
@@ -401,6 +423,7 @@
 CONFIG_IP_NF_NAT_AMANDA=m
 CONFIG_IP_NF_NAT_PPTP=m
 CONFIG_IP_NF_NAT_H323=m
+CONFIG_IP_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -533,6 +556,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -652,6 +676,8 @@
 CONFIG_QSEMI_PHY=m
 CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -749,6 +775,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -781,6 +808,7 @@
 #
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_INDYDOG=m
+# CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 CONFIG_SGI_DS1286=m
 # CONFIG_GEN_RTC is not set
@@ -829,6 +857,7 @@
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -838,6 +867,7 @@
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
 
 #
@@ -910,6 +940,19 @@
 # CONFIG_RTC_CLASS is not set
 
 #
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=m
@@ -926,7 +969,6 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 # CONFIG_XFS_POSIX_ACL is not set
@@ -935,6 +977,7 @@
 CONFIG_MINIX_FS=m
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=m
@@ -991,6 +1034,8 @@
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
 
 #
 # Network File Systems
@@ -1020,7 +1065,9 @@
 CONFIG_SMB_NLS_REMOTE="cp437"
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
 # CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
@@ -1103,6 +1150,7 @@
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
@@ -1162,3 +1210,4 @@
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/mips/emma2rh/common/irq.c linux-2.6.18-rc2/arch/mips/emma2rh/common/irq.c
--- linux-2.6.18-rc1/arch/mips/emma2rh/common/irq.c	2006-07-15 22:34:41.644896269 +0000
+++ linux-2.6.18-rc2/arch/mips/emma2rh/common/irq.c	2006-07-15 22:34:46.821458175 +0000
@@ -22,7 +22,6 @@
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#include <linux/config.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
diff -urN linux-2.6.18-rc1/arch/mips/emma2rh/common/irq_emma2rh.c linux-2.6.18-rc2/arch/mips/emma2rh/common/irq_emma2rh.c
--- linux-2.6.18-rc1/arch/mips/emma2rh/common/irq_emma2rh.c	2006-07-15 22:34:41.644896269 +0000
+++ linux-2.6.18-rc2/arch/mips/emma2rh/common/irq_emma2rh.c	2006-07-15 22:34:46.821458175 +0000
@@ -78,7 +78,7 @@
 		ll_emma2rh_irq_enable(irq - emma2rh_irq_base);
 }
 
-hw_irq_controller emma2rh_irq_controller = {
+struct irq_chip emma2rh_irq_controller = {
 	.typename = "emma2rh_irq",
 	.startup = emma2rh_irq_startup,
 	.shutdown = emma2rh_irq_shutdown,
diff -urN linux-2.6.18-rc1/arch/mips/emma2rh/common/prom.c linux-2.6.18-rc2/arch/mips/emma2rh/common/prom.c
--- linux-2.6.18-rc1/arch/mips/emma2rh/common/prom.c	2006-07-15 22:34:41.648896703 +0000
+++ linux-2.6.18-rc2/arch/mips/emma2rh/common/prom.c	2006-07-15 22:34:46.825458610 +0000
@@ -22,7 +22,6 @@
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#include <linux/config.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/sched.h>
diff -urN linux-2.6.18-rc1/arch/mips/emma2rh/markeins/irq.c linux-2.6.18-rc2/arch/mips/emma2rh/markeins/irq.c
--- linux-2.6.18-rc1/arch/mips/emma2rh/markeins/irq.c	2006-07-15 22:34:41.648896703 +0000
+++ linux-2.6.18-rc2/arch/mips/emma2rh/markeins/irq.c	2006-07-15 22:34:46.825458610 +0000
@@ -22,7 +22,6 @@
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#include <linux/config.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
diff -urN linux-2.6.18-rc1/arch/mips/emma2rh/markeins/irq_markeins.c linux-2.6.18-rc2/arch/mips/emma2rh/markeins/irq_markeins.c
--- linux-2.6.18-rc1/arch/mips/emma2rh/markeins/irq_markeins.c	2006-07-15 22:34:41.648896703 +0000
+++ linux-2.6.18-rc2/arch/mips/emma2rh/markeins/irq_markeins.c	2006-07-15 22:34:46.825458610 +0000
@@ -67,7 +67,7 @@
 		ll_emma2rh_sw_irq_enable(irq - emma2rh_sw_irq_base);
 }
 
-hw_irq_controller emma2rh_sw_irq_controller = {
+struct irq_chip emma2rh_sw_irq_controller = {
 	.typename = "emma2rh_sw_irq",
 	.startup = emma2rh_sw_irq_startup,
 	.shutdown = emma2rh_sw_irq_shutdown,
@@ -147,7 +147,7 @@
 		ll_emma2rh_gpio_irq_enable(irq - emma2rh_gpio_irq_base);
 }
 
-hw_irq_controller emma2rh_gpio_irq_controller = {
+struct irq_chip emma2rh_gpio_irq_controller = {
 	.typename = "emma2rh_gpio_irq",
 	.startup = emma2rh_gpio_irq_startup,
 	.shutdown = emma2rh_gpio_irq_shutdown,
diff -urN linux-2.6.18-rc1/arch/mips/emma2rh/markeins/platform.c linux-2.6.18-rc2/arch/mips/emma2rh/markeins/platform.c
--- linux-2.6.18-rc1/arch/mips/emma2rh/markeins/platform.c	2006-07-15 22:34:41.648896703 +0000
+++ linux-2.6.18-rc2/arch/mips/emma2rh/markeins/platform.c	2006-07-15 22:34:46.825458610 +0000
@@ -20,7 +20,6 @@
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#include <linux/config.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
diff -urN linux-2.6.18-rc1/arch/mips/emma2rh/markeins/setup.c linux-2.6.18-rc2/arch/mips/emma2rh/markeins/setup.c
--- linux-2.6.18-rc1/arch/mips/emma2rh/markeins/setup.c	2006-07-15 22:34:41.648896703 +0000
+++ linux-2.6.18-rc2/arch/mips/emma2rh/markeins/setup.c	2006-07-15 22:34:46.825458610 +0000
@@ -22,7 +22,6 @@
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#include <linux/config.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
@@ -105,7 +104,7 @@
 	mips_hpt_frequency = (bus_frequency * (4 + reg)) / 4 / 2;
 }
 
-static void __init emma2rh_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
 	/* we are using the cpu counter for timer interrupts */
 	setup_irq(CPU_IRQ_BASE + 7, irq);
@@ -150,7 +149,6 @@
 	set_io_port_base(KSEG1ADDR(EMMA2RH_PCI_IO_BASE));
 
 	board_time_init = emma2rh_time_init;
-	board_timer_setup = emma2rh_timer_setup;
 
 	_machine_restart = markeins_machine_restart;
 	_machine_halt = markeins_machine_halt;
diff -urN linux-2.6.18-rc1/arch/mips/gt64120/ev64120/irq.c linux-2.6.18-rc2/arch/mips/gt64120/ev64120/irq.c
--- linux-2.6.18-rc1/arch/mips/gt64120/ev64120/irq.c	2006-07-15 22:34:41.648896703 +0000
+++ linux-2.6.18-rc2/arch/mips/gt64120/ev64120/irq.c	2006-07-15 22:34:46.825458610 +0000
@@ -104,7 +104,7 @@
 		enable_ev64120_irq(irq);
 }
 
-static struct hw_interrupt_type ev64120_irq_type = {
+static struct irq_chip ev64120_irq_type = {
 	.typename	= "EV64120",
 	.startup	= startup_ev64120_irq,
 	.shutdown	= shutdown_ev64120_irq,
@@ -138,7 +138,7 @@
 	/*  Let's initialize our IRQ descriptors  */
 	for (i = 0; i < NR_IRQS; i++) {
 		irq_desc[i].status = 0;
-		irq_desc[i].chip = &no_irq_type;
+		irq_desc[i].chip = &no_irq_chip;
 		irq_desc[i].action = NULL;
 		irq_desc[i].depth = 0;
 		spin_lock_init(&irq_desc[i].lock);
diff -urN linux-2.6.18-rc1/arch/mips/gt64120/wrppmc/setup.c linux-2.6.18-rc2/arch/mips/gt64120/wrppmc/setup.c
--- linux-2.6.18-rc1/arch/mips/gt64120/wrppmc/setup.c	2006-07-15 22:34:41.652897137 +0000
+++ linux-2.6.18-rc2/arch/mips/gt64120/wrppmc/setup.c	2006-07-15 22:34:46.829459044 +0000
@@ -8,7 +8,6 @@
  * Copyright (C) 1996, 1997, 2004 by Ralf Baechle (ralf@linux-mips.org)
  * Copyright (C) 2006, Wind River System Inc. Rongkai.zhan <rongkai.zhan@windriver.com>
  */
-#include <linux/config.h>
 #include <linux/init.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
@@ -128,7 +127,6 @@
 void __init plat_mem_setup(void)
 {
 	extern void wrppmc_time_init(void);
-	extern void wrppmc_timer_setup(struct irqaction *);
 	extern void wrppmc_machine_restart(char *command);
 	extern void wrppmc_machine_halt(void);
 	extern void wrppmc_machine_power_off(void);
@@ -139,7 +137,6 @@
 
 	/* Use MIPS Count/Compare Timer */
 	board_time_init   = wrppmc_time_init;
-	board_timer_setup = wrppmc_timer_setup;
 
 	/* This makes the operations of 'in/out[bwl]' to the
 	 * physical address ( < KSEG0) can work via KSEG1
diff -urN linux-2.6.18-rc1/arch/mips/gt64120/wrppmc/time.c linux-2.6.18-rc2/arch/mips/gt64120/wrppmc/time.c
--- linux-2.6.18-rc1/arch/mips/gt64120/wrppmc/time.c	2006-07-15 22:34:41.652897137 +0000
+++ linux-2.6.18-rc2/arch/mips/gt64120/wrppmc/time.c	2006-07-15 22:34:46.829459044 +0000
@@ -10,7 +10,6 @@
  * Copyright (C) 1996, 1997, 2004 by Ralf Baechle (ralf@linux-mips.org)
  * Copyright (C) 2006, Wind River System Inc.
  */
-#include <linux/config.h>
 #include <linux/init.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
@@ -27,7 +26,7 @@
 
 #define WRPPMC_CPU_CLK_FREQ 40000000 /* 40MHZ */
 
-void __init wrppmc_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
 	/* Install ISR for timer interrupt */
 	setup_irq(WRPPMC_MIPS_TIMER_IRQ, irq);
diff -urN linux-2.6.18-rc1/arch/mips/ite-boards/generic/irq.c linux-2.6.18-rc2/arch/mips/ite-boards/generic/irq.c
--- linux-2.6.18-rc1/arch/mips/ite-boards/generic/irq.c	2006-07-15 22:34:41.652897137 +0000
+++ linux-2.6.18-rc2/arch/mips/ite-boards/generic/irq.c	2006-07-15 22:34:46.829459044 +0000
@@ -133,7 +133,7 @@
 		enable_it8172_irq(irq);
 }
 
-static struct hw_interrupt_type it8172_irq_type = {
+static struct irq_chip it8172_irq_type = {
 	.typename = "ITE8172",
 	.startup = startup_ite_irq,
 	.shutdown = shutdown_ite_irq,
@@ -153,7 +153,7 @@
 #define shutdown_none	disable_none
 #define end_none	enable_none
 
-static struct hw_interrupt_type cp0_irq_type = {
+static struct irq_chip cp0_irq_type = {
 	.typename = "CP0 Count",
 	.startup = startup_none,
 	.shutdown = shutdown_none,
diff -urN linux-2.6.18-rc1/arch/mips/ite-boards/generic/it8172_setup.c linux-2.6.18-rc2/arch/mips/ite-boards/generic/it8172_setup.c
--- linux-2.6.18-rc1/arch/mips/ite-boards/generic/it8172_setup.c	2006-07-15 22:34:41.652897137 +0000
+++ linux-2.6.18-rc2/arch/mips/ite-boards/generic/it8172_setup.c	2006-07-15 22:34:46.829459044 +0000
@@ -29,6 +29,7 @@
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/ioport.h>
+#include <linux/irq.h>
 #include <linux/serial_reg.h>
 #include <linux/major.h>
 #include <linux/kdev_t.h>
@@ -58,10 +59,7 @@
 extern void it8172_halt(void);
 extern void it8172_power_off(void);
 
-extern void (*board_time_init)(void);
-extern void (*board_timer_setup)(struct irqaction *irq);
 extern void it8172_time_init(void);
-extern void it8172_timer_setup(struct irqaction *irq);
 
 #ifdef CONFIG_IT8172_REVC
 struct {
@@ -169,7 +167,6 @@
 	clear_c0_status(ST0_FR);
 
 	board_time_init = it8172_time_init;
-	board_timer_setup = it8172_timer_setup;
 
 	_machine_restart = it8172_restart;
 	_machine_halt = it8172_halt;
diff -urN linux-2.6.18-rc1/arch/mips/ite-boards/generic/time.c linux-2.6.18-rc2/arch/mips/ite-boards/generic/time.c
--- linux-2.6.18-rc1/arch/mips/ite-boards/generic/time.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/mips/ite-boards/generic/time.c	2006-07-15 22:34:46.829459044 +0000
@@ -233,7 +233,8 @@
 }
 
 #define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
-void __init it8172_timer_setup(struct irqaction *irq)
+
+void __init plat_timer_setup(struct irqaction *irq)
 {
 	puts("timer_setup\n");
 	put32(NR_IRQS);
diff -urN linux-2.6.18-rc1/arch/mips/jazz/irq.c linux-2.6.18-rc2/arch/mips/jazz/irq.c
--- linux-2.6.18-rc1/arch/mips/jazz/irq.c	2006-07-15 22:34:41.652897137 +0000
+++ linux-2.6.18-rc2/arch/mips/jazz/irq.c	2006-07-15 22:34:46.829459044 +0000
@@ -55,7 +55,7 @@
 		enable_r4030_irq(irq);
 }
 
-static struct hw_interrupt_type r4030_irq_type = {
+static struct irq_chip r4030_irq_type = {
 	.typename = "R4030",
 	.startup = startup_r4030_irq,
 	.shutdown = shutdown_r4030_irq,
diff -urN linux-2.6.18-rc1/arch/mips/jazz/setup.c linux-2.6.18-rc2/arch/mips/jazz/setup.c
--- linux-2.6.18-rc1/arch/mips/jazz/setup.c	2006-07-15 22:34:41.652897137 +0000
+++ linux-2.6.18-rc2/arch/mips/jazz/setup.c	2006-07-15 22:34:46.829459044 +0000
@@ -37,7 +37,7 @@
 extern void jazz_machine_halt(void);
 extern void jazz_machine_power_off(void);
 
-static void __init jazz_time_init(struct irqaction *irq)
+void __init plat_time_init(struct irqaction *irq)
 {
 	/* set the clock to 100 Hz */
 	r4030_write_reg32(JAZZ_TIMER_INTERVAL, 9);
@@ -75,7 +75,6 @@
 	for (i = 0; i < ARRAY_SIZE(jazz_io_resources); i++)
 		request_resource(&ioport_resource, jazz_io_resources + i);
 
-        board_timer_setup = jazz_time_init;
 	/* The RTC is outside the port address space */
 
 	_machine_restart = jazz_machine_restart;
diff -urN linux-2.6.18-rc1/arch/mips/jmr3927/rbhma3100/irq.c linux-2.6.18-rc2/arch/mips/jmr3927/rbhma3100/irq.c
--- linux-2.6.18-rc1/arch/mips/jmr3927/rbhma3100/irq.c	2006-07-15 22:34:41.652897137 +0000
+++ linux-2.6.18-rc2/arch/mips/jmr3927/rbhma3100/irq.c	2006-07-15 22:34:46.829459044 +0000
@@ -416,7 +416,7 @@
 	set_c0_status(ST0_IM);	/* IE bit is still 0. */
 }
 
-static hw_irq_controller jmr3927_irq_controller = {
+static struct irq_chip jmr3927_irq_controller = {
 	.typename = "jmr3927_irq",
 	.startup = jmr3927_irq_startup,
 	.shutdown = jmr3927_irq_shutdown,
diff -urN linux-2.6.18-rc1/arch/mips/jmr3927/rbhma3100/setup.c linux-2.6.18-rc2/arch/mips/jmr3927/rbhma3100/setup.c
--- linux-2.6.18-rc1/arch/mips/jmr3927/rbhma3100/setup.c	2006-07-15 22:34:41.652897137 +0000
+++ linux-2.6.18-rc2/arch/mips/jmr3927/rbhma3100/setup.c	2006-07-15 22:34:46.829459044 +0000
@@ -40,6 +40,7 @@
 #include <linux/sched.h>
 #include <linux/pci.h>
 #include <linux/ide.h>
+#include <linux/irq.h>
 #include <linux/ioport.h>
 #include <linux/param.h>	/* for HZ */
 #include <linux/delay.h>
@@ -183,9 +184,8 @@
 }
 
 unsigned long jmr3927_do_gettimeoffset(void);
-extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
 
-static void __init jmr3927_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
 	do_gettimeoffset = jmr3927_do_gettimeoffset;
 
@@ -244,7 +244,6 @@
 	set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO);
 
 	board_time_init = jmr3927_time_init;
-	board_timer_setup = jmr3927_timer_setup;
 
 	_machine_restart = jmr3927_machine_restart;
 	_machine_halt = jmr3927_machine_halt;
diff -urN linux-2.6.18-rc1/arch/mips/kernel/apm.c linux-2.6.18-rc2/arch/mips/kernel/apm.c
--- linux-2.6.18-rc1/arch/mips/kernel/apm.c	2006-07-15 22:34:41.652897137 +0000
+++ linux-2.6.18-rc2/arch/mips/kernel/apm.c	2006-07-15 22:34:46.829459044 +0000
@@ -10,7 +10,6 @@
  * [This document is available from Microsoft at:
  *    http://www.microsoft.com/hwdev/busbios/amp_12.htm]
  */
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/poll.h>
 #include <linux/timer.h>
diff -urN linux-2.6.18-rc1/arch/mips/kernel/cpu-probe.c linux-2.6.18-rc2/arch/mips/kernel/cpu-probe.c
--- linux-2.6.18-rc1/arch/mips/kernel/cpu-probe.c	2006-07-15 22:34:41.652897137 +0000
+++ linux-2.6.18-rc2/arch/mips/kernel/cpu-probe.c	2006-07-15 22:34:46.833459478 +0000
@@ -459,7 +459,7 @@
 	isa = (config0 & MIPS_CONF_AT) >> 13;
 	switch (isa) {
 	case 0:
-		switch ((config0 >> 10) & 7) {
+		switch ((config0 & MIPS_CONF_AR) >> 10) {
 		case 0:
 			c->isa_level = MIPS_CPU_ISA_M32R1;
 			break;
@@ -471,7 +471,7 @@
 		}
 		break;
 	case 2:
-		switch ((config0 >> 10) & 7) {
+		switch ((config0 & MIPS_CONF_AR) >> 10) {
 		case 0:
 			c->isa_level = MIPS_CPU_ISA_M64R1;
 			break;
@@ -548,7 +548,7 @@
 	return config3 & MIPS_CONF_M;
 }
 
-static inline void decode_configs(struct cpuinfo_mips *c)
+static void __init decode_configs(struct cpuinfo_mips *c)
 {
 	/* MIPS32 or MIPS64 compliant CPU.  */
 	c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER |
diff -urN linux-2.6.18-rc1/arch/mips/kernel/entry.S linux-2.6.18-rc2/arch/mips/kernel/entry.S
--- linux-2.6.18-rc1/arch/mips/kernel/entry.S	2006-07-15 22:34:41.652897137 +0000
+++ linux-2.6.18-rc2/arch/mips/kernel/entry.S	2006-07-15 22:34:46.833459478 +0000
@@ -113,6 +113,21 @@
 	RESTORE_AT
 	RESTORE_STATIC
 FEXPORT(restore_partial)		# restore partial frame
+#ifdef CONFIG_TRACE_IRQFLAGS
+	SAVE_STATIC
+	SAVE_AT
+	SAVE_TEMP
+	LONG_L	v0, PT_STATUS(sp)
+	and	v0, 1
+	beqz	v0, 1f
+	jal	trace_hardirqs_on
+	b	2f
+1:	jal	trace_hardirqs_off
+2:
+	RESTORE_TEMP
+	RESTORE_AT
+	RESTORE_STATIC
+#endif
 	RESTORE_SOME
 	RESTORE_SP_AND_RET
 	.set	at
diff -urN linux-2.6.18-rc1/arch/mips/kernel/gdb-low.S linux-2.6.18-rc2/arch/mips/kernel/gdb-low.S
--- linux-2.6.18-rc1/arch/mips/kernel/gdb-low.S	2006-07-15 22:34:41.652897137 +0000
+++ linux-2.6.18-rc2/arch/mips/kernel/gdb-low.S	2006-07-15 22:34:46.833459478 +0000
@@ -7,6 +7,7 @@
 
 #include <asm/asm.h>
 #include <asm/errno.h>
+#include <asm/irqflags.h>
 #include <asm/mipsregs.h>
 #include <asm/regdef.h>
 #include <asm/stackframe.h>
@@ -120,6 +121,7 @@
 		LONG_S	$31, GDB_FR_REG31(sp)
 
 		CLI				/* disable interrupts */
+		TRACE_IRQS_OFF
 
 /*
  * Followed by the floating point registers
diff -urN linux-2.6.18-rc1/arch/mips/kernel/genex.S linux-2.6.18-rc2/arch/mips/kernel/genex.S
--- linux-2.6.18-rc1/arch/mips/kernel/genex.S	2006-07-15 22:34:41.656897571 +0000
+++ linux-2.6.18-rc2/arch/mips/kernel/genex.S	2006-07-15 22:34:46.833459478 +0000
@@ -13,6 +13,7 @@
 #include <asm/asm.h>
 #include <asm/asmmacro.h>
 #include <asm/cacheops.h>
+#include <asm/irqflags.h>
 #include <asm/regdef.h>
 #include <asm/fpregdef.h>
 #include <asm/mipsregs.h>
@@ -128,6 +129,7 @@
 NESTED(handle_int, PT_SIZE, sp)
 	SAVE_ALL
 	CLI
+	TRACE_IRQS_OFF
 
 	PTR_LA	ra, ret_from_irq
 	move	a0, sp
@@ -216,6 +218,7 @@
 	_ehb
 #endif /* CONFIG_MIPS_MT_SMTC */
 	CLI
+	TRACE_IRQS_OFF
 	move	a0, sp
 	jalr	v0
 	j	ret_from_irq
@@ -288,11 +291,13 @@
 	.endm
 
 	.macro	__build_clear_sti
+	TRACE_IRQS_ON
 	STI
 	.endm
 
 	.macro	__build_clear_cli
 	CLI
+	TRACE_IRQS_OFF
 	.endm
 
 	.macro	__build_clear_fpe
@@ -300,6 +305,7 @@
 	li	a2, ~(0x3f << 12)
 	and	a2, a1
 	ctc1	a2, fcr31
+	TRACE_IRQS_ON
 	STI
 	.endm
 
@@ -365,7 +371,7 @@
 	BUILD_HANDLER mdmx mdmx sti silent		/* #22 */
 	BUILD_HANDLER watch watch sti verbose		/* #23 */
 	BUILD_HANDLER mcheck mcheck cli verbose		/* #24 */
-	BUILD_HANDLER mt mt sti verbose			/* #25 */
+	BUILD_HANDLER mt mt sti silent			/* #25 */
 	BUILD_HANDLER dsp dsp sti silent		/* #26 */
 	BUILD_HANDLER reserved reserved sti verbose	/* others */
 
diff -urN linux-2.6.18-rc1/arch/mips/kernel/head.S linux-2.6.18-rc2/arch/mips/kernel/head.S
--- linux-2.6.18-rc1/arch/mips/kernel/head.S	2006-07-15 22:34:41.656897571 +0000
+++ linux-2.6.18-rc2/arch/mips/kernel/head.S	2006-07-15 22:34:46.833459478 +0000
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 1994, 1995 Waldorf Electronics
  * Written by Ralf Baechle and Andreas Busse
- * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 Ralf Baechle
+ * Copyright (C) 1994 - 99, 2003, 06 Ralf Baechle
  * Copyright (C) 1996 Paul M. Antoine
  * Modified for DECStation and hence R3000 support by Paul M. Antoine
  * Further modifications by David S. Miller and Harald Koerfgen
@@ -18,6 +18,7 @@
 
 #include <asm/asm.h>
 #include <asm/asmmacro.h>
+#include <asm/irqflags.h>
 #include <asm/regdef.h>
 #include <asm/page.h>
 #include <asm/mipsregs.h>
diff -urN linux-2.6.18-rc1/arch/mips/kernel/i8259.c linux-2.6.18-rc2/arch/mips/kernel/i8259.c
--- linux-2.6.18-rc1/arch/mips/kernel/i8259.c	2006-07-15 22:34:41.656897571 +0000
+++ linux-2.6.18-rc2/arch/mips/kernel/i8259.c	2006-07-15 22:34:46.833459478 +0000
@@ -51,7 +51,7 @@
 	return 0; /* never anything pending */
 }
 
-static struct hw_interrupt_type i8259A_irq_type = {
+static struct irq_chip i8259A_irq_type = {
 	.typename = "XT-PIC",
 	.startup = startup_8259A_irq,
 	.shutdown = shutdown_8259A_irq,
diff -urN linux-2.6.18-rc1/arch/mips/kernel/irixelf.c linux-2.6.18-rc2/arch/mips/kernel/irixelf.c
--- linux-2.6.18-rc1/arch/mips/kernel/irixelf.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/mips/kernel/irixelf.c	2006-07-15 22:34:46.833459478 +0000
@@ -999,8 +999,6 @@
 	return 1;
 }
 
-#define roundup(x, y)  ((((x)+((y)-1))/(y))*(y))
-
 /* An ELF note in memory. */
 struct memelfnote
 {
diff -urN linux-2.6.18-rc1/arch/mips/kernel/irq-msc01.c linux-2.6.18-rc2/arch/mips/kernel/irq-msc01.c
--- linux-2.6.18-rc1/arch/mips/kernel/irq-msc01.c	2006-07-15 22:34:41.656897571 +0000
+++ linux-2.6.18-rc2/arch/mips/kernel/irq-msc01.c	2006-07-15 22:34:46.833459478 +0000
@@ -137,7 +137,7 @@
 
 #define shutdown_msc_irq	disable_msc_irq
 
-struct hw_interrupt_type msc_levelirq_type = {
+struct irq_chip msc_levelirq_type = {
 	.typename = "SOC-it-Level",
 	.startup = startup_msc_irq,
 	.shutdown = shutdown_msc_irq,
@@ -147,7 +147,7 @@
 	.end = end_msc_irq,
 };
 
-struct hw_interrupt_type msc_edgeirq_type = {
+struct irq_chip msc_edgeirq_type = {
 	.typename = "SOC-it-Edge",
 	.startup =startup_msc_irq,
 	.shutdown = shutdown_msc_irq,
diff -urN linux-2.6.18-rc1/arch/mips/kernel/irq-mv6434x.c linux-2.6.18-rc2/arch/mips/kernel/irq-mv6434x.c
--- linux-2.6.18-rc1/arch/mips/kernel/irq-mv6434x.c	2006-07-15 22:34:41.656897571 +0000
+++ linux-2.6.18-rc2/arch/mips/kernel/irq-mv6434x.c	2006-07-15 22:34:46.833459478 +0000
@@ -136,7 +136,7 @@
 
 #define shutdown_mv64340_irq	disable_mv64340_irq
 
-struct hw_interrupt_type mv64340_irq_type = {
+struct irq_chip mv64340_irq_type = {
 	.typename = "MV-64340",
 	.startup = startup_mv64340_irq,
 	.shutdown = shutdown_mv64340_irq,
diff -urN linux-2.6.18-rc1/arch/mips/kernel/irq-rm7000.c linux-2.6.18-rc2/arch/mips/kernel/irq-rm7000.c
--- linux-2.6.18-rc1/arch/mips/kernel/irq-rm7000.c	2006-07-15 22:34:41.656897571 +0000
+++ linux-2.6.18-rc2/arch/mips/kernel/irq-rm7000.c	2006-07-15 22:34:46.833459478 +0000
@@ -71,7 +71,7 @@
 		unmask_rm7k_irq(irq);
 }
 
-static hw_irq_controller rm7k_irq_controller = {
+static struct irq_chip rm7k_irq_controller = {
 	.typename = "RM7000",
 	.startup = rm7k_cpu_irq_startup,
 	.shutdown = rm7k_cpu_irq_shutdown,
diff -urN linux-2.6.18-rc1/arch/mips/kernel/irq-rm9000.c linux-2.6.18-rc2/arch/mips/kernel/irq-rm9000.c
--- linux-2.6.18-rc1/arch/mips/kernel/irq-rm9000.c	2006-07-15 22:34:41.656897571 +0000
+++ linux-2.6.18-rc2/arch/mips/kernel/irq-rm9000.c	2006-07-15 22:34:46.833459478 +0000
@@ -105,7 +105,7 @@
 		unmask_rm9k_irq(irq);
 }
 
-static hw_irq_controller rm9k_irq_controller = {
+static struct irq_chip rm9k_irq_controller = {
 	.typename = "RM9000",
 	.startup = rm9k_cpu_irq_startup,
 	.shutdown = rm9k_cpu_irq_shutdown,
@@ -115,7 +115,7 @@
 	.end = rm9k_cpu_irq_end,
 };
 
-static hw_irq_controller rm9k_perfcounter_irq = {
+static struct irq_chip rm9k_perfcounter_irq = {
 	.typename = "RM9000",
 	.startup = rm9k_perfcounter_irq_startup,
 	.shutdown = rm9k_perfcounter_irq_shutdown,
diff -urN linux-2.6.18-rc1/arch/mips/kernel/irq.c linux-2.6.18-rc2/arch/mips/kernel/irq.c
--- linux-2.6.18-rc1/arch/mips/kernel/irq.c	2006-07-15 22:34:41.656897571 +0000
+++ linux-2.6.18-rc2/arch/mips/kernel/irq.c	2006-07-15 22:34:46.833459478 +0000
@@ -136,7 +136,7 @@
 		irq_desc[i].status  = IRQ_DISABLED;
 		irq_desc[i].action  = NULL;
 		irq_desc[i].depth   = 1;
-		irq_desc[i].chip = &no_irq_type;
+		irq_desc[i].chip = &no_irq_chip;
 		spin_lock_init(&irq_desc[i].lock);
 #ifdef CONFIG_MIPS_MT_SMTC
 		irq_hwmask[i] = 0;
diff -urN linux-2.6.18-rc1/arch/mips/kernel/irq_cpu.c linux-2.6.18-rc2/arch/mips/kernel/irq_cpu.c
--- linux-2.6.18-rc1/arch/mips/kernel/irq_cpu.c	2006-07-15 22:34:41.656897571 +0000
+++ linux-2.6.18-rc2/arch/mips/kernel/irq_cpu.c	2006-07-15 22:34:46.833459478 +0000
@@ -94,7 +94,7 @@
 		unmask_mips_irq(irq);
 }
 
-static hw_irq_controller mips_cpu_irq_controller = {
+static struct irq_chip mips_cpu_irq_controller = {
 	.typename	= "MIPS",
 	.startup	= mips_cpu_irq_startup,
 	.shutdown	= mips_cpu_irq_shutdown,
@@ -140,7 +140,7 @@
 
 #define mips_mt_cpu_irq_end mips_cpu_irq_end
 
-static hw_irq_controller mips_mt_cpu_irq_controller = {
+static struct irq_chip mips_mt_cpu_irq_controller = {
 	.typename	= "MIPS",
 	.startup	= mips_mt_cpu_irq_startup,
 	.shutdown	= mips_mt_cpu_irq_shutdown,
diff -urN linux-2.6.18-rc1/arch/mips/kernel/mips-mt.c linux-2.6.18-rc2/arch/mips/kernel/mips-mt.c
--- linux-2.6.18-rc1/arch/mips/kernel/mips-mt.c	2006-07-15 22:34:41.656897571 +0000
+++ linux-2.6.18-rc2/arch/mips/kernel/mips-mt.c	2006-07-15 22:34:46.837459912 +0000
@@ -7,6 +7,7 @@
 #include <linux/sched.h>
 #include <linux/cpumask.h>
 #include <linux/interrupt.h>
+#include <linux/security.h>
 
 #include <asm/cpu.h>
 #include <asm/processor.h>
diff -urN linux-2.6.18-rc1/arch/mips/kernel/scall32-o32.S linux-2.6.18-rc2/arch/mips/kernel/scall32-o32.S
--- linux-2.6.18-rc1/arch/mips/kernel/scall32-o32.S	2006-07-15 22:34:41.660898006 +0000
+++ linux-2.6.18-rc2/arch/mips/kernel/scall32-o32.S	2006-07-15 22:34:46.837459912 +0000
@@ -3,13 +3,14 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 1995, 96, 97, 98, 99, 2000, 01, 02 by Ralf Baechle
+ * Copyright (C) 1995-99, 2000- 02, 06 Ralf Baechle <ralf@linux-mips.org>
  * Copyright (C) 2001 MIPS Technologies, Inc.
  * Copyright (C) 2004 Thiemo Seufer
  */
 #include <linux/errno.h>
 #include <asm/asm.h>
 #include <asm/asmmacro.h>
+#include <asm/irqflags.h>
 #include <asm/mipsregs.h>
 #include <asm/regdef.h>
 #include <asm/stackframe.h>
@@ -27,6 +28,18 @@
 NESTED(handle_sys, PT_SIZE, sp)
 	.set	noat
 	SAVE_SOME
+#ifdef CONFIG_TRACE_IRQFLAGS
+	TRACE_IRQS_ON
+#ifdef CONFIG_64BIT
+	LONG_L	$8, PT_R8(sp)
+	LONG_L	$9, PT_R9(sp)
+#endif
+	LONG_L	$7, PT_R7(sp)
+	LONG_L	$6, PT_R6(sp)
+	LONG_L	$5, PT_R5(sp)
+	LONG_L	$4, PT_R4(sp)
+	LONG_L	$2, PT_R2(sp)
+#endif
 	STI
 	.set	at
 
@@ -647,6 +660,8 @@
 	sys	sys_splice		4
 	sys	sys_sync_file_range	7	/* 4305 */
 	sys	sys_tee			4
+	sys	sys_vmsplice		4
+	sys	sys_move_pages		6
 	.endm
 
 	/* We pre-compute the number of _instruction_ bytes needed to
diff -urN linux-2.6.18-rc1/arch/mips/kernel/scall64-64.S linux-2.6.18-rc2/arch/mips/kernel/scall64-64.S
--- linux-2.6.18-rc1/arch/mips/kernel/scall64-64.S	2006-07-15 22:34:41.660898006 +0000
+++ linux-2.6.18-rc2/arch/mips/kernel/scall64-64.S	2006-07-15 22:34:46.837459912 +0000
@@ -10,6 +10,7 @@
 #include <linux/errno.h>
 #include <asm/asm.h>
 #include <asm/asmmacro.h>
+#include <asm/irqflags.h>
 #include <asm/mipsregs.h>
 #include <asm/regdef.h>
 #include <asm/stackframe.h>
@@ -33,6 +34,7 @@
 	 */
 	.set	noat
 	SAVE_SOME
+	TRACE_IRQS_ON
 	STI
 	.set	at
 #endif
@@ -462,3 +464,5 @@
 	PTR	sys_splice
 	PTR	sys_sync_file_range
 	PTR	sys_tee				/* 5265 */
+	PTR	sys_vmsplice
+	PTR	sys_move_pages
diff -urN linux-2.6.18-rc1/arch/mips/kernel/scall64-n32.S linux-2.6.18-rc2/arch/mips/kernel/scall64-n32.S
--- linux-2.6.18-rc1/arch/mips/kernel/scall64-n32.S	2006-07-15 22:34:41.660898006 +0000
+++ linux-2.6.18-rc2/arch/mips/kernel/scall64-n32.S	2006-07-15 22:34:46.837459912 +0000
@@ -10,6 +10,7 @@
 #include <linux/errno.h>
 #include <asm/asm.h>
 #include <asm/asmmacro.h>
+#include <asm/irqflags.h>
 #include <asm/mipsregs.h>
 #include <asm/regdef.h>
 #include <asm/stackframe.h>
@@ -32,6 +33,7 @@
 #ifndef CONFIG_MIPS32_O32
 	.set	noat
 	SAVE_SOME
+	TRACE_IRQS_ON
 	STI
 	.set	at
 #endif
@@ -388,3 +390,5 @@
 	PTR	sys_splice
 	PTR	sys_sync_file_range
 	PTR	sys_tee
+	PTR	sys_vmsplice			/* 6271 */
+	PTR	sys_move_pages
diff -urN linux-2.6.18-rc1/arch/mips/kernel/scall64-o32.S linux-2.6.18-rc2/arch/mips/kernel/scall64-o32.S
--- linux-2.6.18-rc1/arch/mips/kernel/scall64-o32.S	2006-07-15 22:34:41.660898006 +0000
+++ linux-2.6.18-rc2/arch/mips/kernel/scall64-o32.S	2006-07-15 22:34:46.837459912 +0000
@@ -16,6 +16,7 @@
 #include <linux/errno.h>
 #include <asm/asm.h>
 #include <asm/asmmacro.h>
+#include <asm/irqflags.h>
 #include <asm/mipsregs.h>
 #include <asm/regdef.h>
 #include <asm/stackframe.h>
@@ -27,6 +28,7 @@
 NESTED(handle_sys, PT_SIZE, sp)
 	.set	noat
 	SAVE_SOME
+	TRACE_IRQS_ON
 	STI
 	.set	at
 	ld	t1, PT_EPC(sp)		# skip syscall on return
@@ -510,4 +512,6 @@
 	PTR	sys_splice
 	PTR	sys32_sync_file_range		/* 4305 */
 	PTR	sys_tee
+	PTR	sys_vmsplice
+	PTR	compat_sys_move_pages
 	.size	sys_call_table,.-sys_call_table
diff -urN linux-2.6.18-rc1/arch/mips/kernel/setup.c linux-2.6.18-rc2/arch/mips/kernel/setup.c
--- linux-2.6.18-rc1/arch/mips/kernel/setup.c	2006-07-15 22:34:41.660898006 +0000
+++ linux-2.6.18-rc2/arch/mips/kernel/setup.c	2006-07-15 22:34:46.837459912 +0000
@@ -24,7 +24,7 @@
 #include <linux/user.h>
 #include <linux/utsname.h>
 #include <linux/a.out.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/bootmem.h>
 #include <linux/initrd.h>
 #include <linux/major.h>
diff -urN linux-2.6.18-rc1/arch/mips/kernel/smp.c linux-2.6.18-rc2/arch/mips/kernel/smp.c
--- linux-2.6.18-rc1/arch/mips/kernel/smp.c	2006-07-15 22:34:41.660898006 +0000
+++ linux-2.6.18-rc2/arch/mips/kernel/smp.c	2006-07-15 22:34:46.841460346 +0000
@@ -319,6 +319,32 @@
 }
 
 /*
+ * Special Variant of smp_call_function for use by TLB functions:
+ *
+ *  o No return value
+ *  o collapses to normal function call on UP kernels
+ *  o collapses to normal function call on systems with a single shared
+ *    primary cache.
+ *  o CONFIG_MIPS_MT_SMTC currently implies there is only one physical core.
+ */
+static inline void smp_on_other_tlbs(void (*func) (void *info), void *info)
+{
+#ifndef CONFIG_MIPS_MT_SMTC
+	smp_call_function(func, info, 1, 1);
+#endif
+}
+
+static inline void smp_on_each_tlb(void (*func) (void *info), void *info)
+{
+	preempt_disable();
+
+	smp_on_other_tlbs(func, info);
+	func(info);
+
+	preempt_enable();
+}
+
+/*
  * The following tlb flush calls are invoked when old translations are
  * being torn down, or pte attributes are changing. For single threaded
  * address spaces, a new context is obtained on the current cpu, and tlb
@@ -336,7 +362,7 @@
 	preempt_disable();
 
 	if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) {
-		smp_call_function(flush_tlb_mm_ipi, (void *)mm, 1, 1);
+		smp_on_other_tlbs(flush_tlb_mm_ipi, (void *)mm);
 	} else {
 		int i;
 		for (i = 0; i < num_online_cpus(); i++)
@@ -372,7 +398,7 @@
 		fd.vma = vma;
 		fd.addr1 = start;
 		fd.addr2 = end;
-		smp_call_function(flush_tlb_range_ipi, (void *)&fd, 1, 1);
+		smp_on_other_tlbs(flush_tlb_range_ipi, (void *)&fd);
 	} else {
 		int i;
 		for (i = 0; i < num_online_cpus(); i++)
@@ -414,7 +440,7 @@
 
 		fd.vma = vma;
 		fd.addr1 = page;
-		smp_call_function(flush_tlb_page_ipi, (void *)&fd, 1, 1);
+		smp_on_other_tlbs(flush_tlb_page_ipi, (void *)&fd);
 	} else {
 		int i;
 		for (i = 0; i < num_online_cpus(); i++)
@@ -434,8 +460,7 @@
 
 void flush_tlb_one(unsigned long vaddr)
 {
-	smp_call_function(flush_tlb_one_ipi, (void *) vaddr, 1, 1);
-	local_flush_tlb_one(vaddr);
+	smp_on_each_tlb(flush_tlb_one_ipi, (void *) vaddr);
 }
 
 static DEFINE_PER_CPU(struct cpu, cpu_devices);
diff -urN linux-2.6.18-rc1/arch/mips/kernel/smtc-asm.S linux-2.6.18-rc2/arch/mips/kernel/smtc-asm.S
--- linux-2.6.18-rc1/arch/mips/kernel/smtc-asm.S	2006-07-15 22:34:41.660898006 +0000
+++ linux-2.6.18-rc2/arch/mips/kernel/smtc-asm.S	2006-07-15 22:34:46.841460346 +0000
@@ -96,6 +96,7 @@
 	/* Save all will redundantly recompute the SP, but use it for now */
 	SAVE_ALL
 	CLI
+	TRACE_IRQS_OFF
 	move	a0,sp
 	/* Function to be invoked passed stack pad slot 5 */
 	lw	t0,PT_PADSLOT5(sp)
diff -urN linux-2.6.18-rc1/arch/mips/kernel/smtc.c linux-2.6.18-rc2/arch/mips/kernel/smtc.c
--- linux-2.6.18-rc1/arch/mips/kernel/smtc.c	2006-07-15 22:34:41.660898006 +0000
+++ linux-2.6.18-rc2/arch/mips/kernel/smtc.c	2006-07-15 22:34:46.841460346 +0000
@@ -127,7 +127,7 @@
 static int __init asidmask_set(char *str)
 {
 	get_option(&str, &asidmask);
-	switch(asidmask) {
+	switch (asidmask) {
 	case 0x1:
 	case 0x3:
 	case 0x7:
@@ -249,7 +249,7 @@
 			/*
 			 * Only count if the MMU Type indicated is TLB
 			 */
-			if(((read_vpe_c0_config() & MIPS_CONF_MT) >> 7) == 1) {
+			if (((read_vpe_c0_config() & MIPS_CONF_MT) >> 7) == 1) {
 				config1val = read_vpe_c0_config1();
 				tlbsiz += ((config1val >> 25) & 0x3f) + 1;
 			}
@@ -500,7 +500,7 @@
 	/* Set up coprocessor affinity CPU mask(s) */
 
 	for (tc = 0; tc < ntc; tc++) {
-		if(cpu_data[tc].options & MIPS_CPU_FPU)
+		if (cpu_data[tc].options & MIPS_CPU_FPU)
 			cpu_set(tc, mt_fpu_cpumask);
 	}
 
@@ -577,13 +577,13 @@
 {
 	/*
 	 * Start timer on secondary VPEs if necessary.
-	 * mips_timer_setup should already have been invoked by init/main
+	 * plat_timer_setup has already have been invoked by init/main
 	 * on "boot" TC.  Like per_cpu_trap_init() hack, this assumes that
 	 * SMTC init code assigns TCs consdecutively and in ascending order
 	 * to across available VPEs.
 	 */
-	if(((read_c0_tcbind() & TCBIND_CURTC) != 0)
-	&& ((read_c0_tcbind() & TCBIND_CURVPE)
+	if (((read_c0_tcbind() & TCBIND_CURTC) != 0) &&
+	    ((read_c0_tcbind() & TCBIND_CURVPE)
 	    != cpu_data[smp_processor_id() - 1].vpe_id)){
 		write_c0_compare (read_c0_count() + mips_hpt_frequency/HZ);
 	}
@@ -757,8 +757,8 @@
 			write_tc_c0_tchalt(0);
 			UNLOCK_CORE_PRA();
 			/* Try to reduce redundant timer interrupt messages */
-			if(type == SMTC_CLOCK_TICK) {
-			    if(atomic_postincrement(&ipi_timer_latch[cpu])!=0) {
+			if (type == SMTC_CLOCK_TICK) {
+			    if (atomic_postincrement(&ipi_timer_latch[cpu])!=0){
 				smtc_ipi_nq(&freeIPIq, pipi);
 				return;
 			    }
@@ -797,7 +797,7 @@
 	 * CU bit of Status is indicator that TC was
 	 * already running on a kernel stack...
 	 */
-	if(tcstatus & ST0_CU0)  {
+	if (tcstatus & ST0_CU0)  {
 		/* Note that this "- 1" is pointer arithmetic */
 		kstack = ((struct pt_regs *)read_tc_gpr_sp()) - 1;
 	} else {
@@ -840,31 +840,31 @@
 
 	smtc_ipi_nq(&freeIPIq, pipi);
 	switch (type_copy) {
-		case SMTC_CLOCK_TICK:
-			/* Invoke Clock "Interrupt" */
-			ipi_timer_latch[dest_copy] = 0;
+	case SMTC_CLOCK_TICK:
+		/* Invoke Clock "Interrupt" */
+		ipi_timer_latch[dest_copy] = 0;
 #ifdef SMTC_IDLE_HOOK_DEBUG
-			clock_hang_reported[dest_copy] = 0;
+		clock_hang_reported[dest_copy] = 0;
 #endif /* SMTC_IDLE_HOOK_DEBUG */
-			local_timer_interrupt(0, NULL, regs);
+		local_timer_interrupt(0, NULL, regs);
+		break;
+	case LINUX_SMP_IPI:
+		switch ((int)arg_copy) {
+		case SMP_RESCHEDULE_YOURSELF:
+			ipi_resched_interrupt(regs);
 			break;
-		case LINUX_SMP_IPI:
-			switch ((int)arg_copy) {
-			case SMP_RESCHEDULE_YOURSELF:
-				ipi_resched_interrupt(regs);
-				break;
-			case SMP_CALL_FUNCTION:
-				ipi_call_interrupt(regs);
-				break;
-			default:
-				printk("Impossible SMTC IPI Argument 0x%x\n",
-					(int)arg_copy);
-				break;
-			}
+		case SMP_CALL_FUNCTION:
+			ipi_call_interrupt(regs);
 			break;
 		default:
-			printk("Impossible SMTC IPI Type 0x%x\n", type_copy);
+			printk("Impossible SMTC IPI Argument 0x%x\n",
+				(int)arg_copy);
 			break;
+		}
+		break;
+	default:
+		printk("Impossible SMTC IPI Type 0x%x\n", type_copy);
+		break;
 	}
 }
 
@@ -879,7 +879,7 @@
 	 * Test is not atomic, but much faster than a dequeue,
 	 * and the vast majority of invocations will have a null queue.
 	 */
-	if(IPIQ[q].head != NULL) {
+	if (IPIQ[q].head != NULL) {
 		while((pipi = smtc_ipi_dq(&IPIQ[q])) != NULL) {
 			/* ipi_decode() should be called with interrupts off */
 			local_irq_save(flags);
@@ -1254,7 +1254,7 @@
 		tlb_read();
 		ehb();
 		ehi = read_c0_entryhi();
-		if((ehi & ASID_MASK) == asid) {
+		if ((ehi & ASID_MASK) == asid) {
 		    /*
 		     * Invalidate only entries with specified ASID,
 		     * makiing sure all entries differ.
diff -urN linux-2.6.18-rc1/arch/mips/kernel/time.c linux-2.6.18-rc2/arch/mips/kernel/time.c
--- linux-2.6.18-rc1/arch/mips/kernel/time.c	2006-07-15 22:34:41.660898006 +0000
+++ linux-2.6.18-rc2/arch/mips/kernel/time.c	2006-07-15 22:34:46.841460346 +0000
@@ -566,14 +566,13 @@
  * 2) setup xtime based on rtc_mips_get_time().
  * 3) choose a appropriate gettimeoffset routine.
  * 4) calculate a couple of cached variables for later usage
- * 5) board_timer_setup() -
+ * 5) plat_timer_setup() -
  *	a) (optional) over-write any choices made above by time_init().
  *	b) machine specific code should setup the timer irqaction.
  *	c) enable the timer interrupt
  */
 
 void (*board_time_init)(void);
-void (*board_timer_setup)(struct irqaction *irq);
 
 unsigned int mips_hpt_frequency;
 
@@ -718,7 +717,7 @@
 	 * to be NULL function so that we are sure the high-level code
 	 * is not invoked accidentally.
 	 */
-	board_timer_setup(&timer_irqaction);
+	plat_timer_setup(&timer_irqaction);
 }
 
 #define FEBRUARY		2
diff -urN linux-2.6.18-rc1/arch/mips/kernel/traps.c linux-2.6.18-rc2/arch/mips/kernel/traps.c
--- linux-2.6.18-rc1/arch/mips/kernel/traps.c	2006-07-15 22:34:41.660898006 +0000
+++ linux-2.6.18-rc2/arch/mips/kernel/traps.c	2006-07-15 22:34:46.841460346 +0000
@@ -569,6 +569,8 @@
  */
 asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 {
+	die_if_kernel("FP exception in kernel code", regs);
+
 	if (fcr31 & FPU_CSR_UNI_X) {
 		int sig;
 
@@ -847,31 +849,29 @@
 {
 	int subcode;
 
-	die_if_kernel("MIPS MT Thread exception in kernel", regs);
-
 	subcode = (read_vpe_c0_vpecontrol() & VPECONTROL_EXCPT)
 			>> VPECONTROL_EXCPT_SHIFT;
 	switch (subcode) {
 	case 0:
-		printk(KERN_ERR "Thread Underflow\n");
+		printk(KERN_DEBUG "Thread Underflow\n");
 		break;
 	case 1:
-		printk(KERN_ERR "Thread Overflow\n");
+		printk(KERN_DEBUG "Thread Overflow\n");
 		break;
 	case 2:
-		printk(KERN_ERR "Invalid YIELD Qualifier\n");
+		printk(KERN_DEBUG "Invalid YIELD Qualifier\n");
 		break;
 	case 3:
-		printk(KERN_ERR "Gating Storage Exception\n");
+		printk(KERN_DEBUG "Gating Storage Exception\n");
 		break;
 	case 4:
-		printk(KERN_ERR "YIELD Scheduler Exception\n");
+		printk(KERN_DEBUG "YIELD Scheduler Exception\n");
 		break;
 	case 5:
-		printk(KERN_ERR "Gating Storage Schedulier Exception\n");
+		printk(KERN_DEBUG "Gating Storage Schedulier Exception\n");
 		break;
 	default:
-		printk(KERN_ERR "*** UNKNOWN THREAD EXCEPTION %d ***\n",
+		printk(KERN_DEBUG "*** UNKNOWN THREAD EXCEPTION %d ***\n",
 			subcode);
 		break;
 	}
@@ -980,10 +980,10 @@
 	unsigned long depc, old_epc;
 	unsigned int debug;
 
-	printk("SDBBP EJTAG debug exception - not handled yet, just ignored!\n");
+	printk(KERN_DEBUG "SDBBP EJTAG debug exception - not handled yet, just ignored!\n");
 	depc = read_c0_depc();
 	debug = read_c0_debug();
-	printk("c0_depc = %0*lx, DEBUG = %08x\n", field, depc, debug);
+	printk(KERN_DEBUG "c0_depc = %0*lx, DEBUG = %08x\n", field, depc, debug);
 	if (debug & 0x80000000) {
 		/*
 		 * In branch delay slot.
@@ -1001,7 +1001,7 @@
 	write_c0_depc(depc);
 
 #if 0
-	printk("\n\n----- Enable EJTAG single stepping ----\n\n");
+	printk(KERN_DEBUG "\n\n----- Enable EJTAG single stepping ----\n\n");
 	write_c0_debug(debug | 0x100);
 #endif
 }
diff -urN linux-2.6.18-rc1/arch/mips/kernel/vpe.c linux-2.6.18-rc2/arch/mips/kernel/vpe.c
--- linux-2.6.18-rc1/arch/mips/kernel/vpe.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/mips/kernel/vpe.c	2006-07-15 22:34:46.841460346 +0000
@@ -28,7 +28,6 @@
  * i.e cat spapp >/dev/vpe1.
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/fs.h>
diff -urN linux-2.6.18-rc1/arch/mips/lasat/interrupt.c linux-2.6.18-rc2/arch/mips/lasat/interrupt.c
--- linux-2.6.18-rc1/arch/mips/lasat/interrupt.c	2006-07-15 22:34:41.664898440 +0000
+++ linux-2.6.18-rc2/arch/mips/lasat/interrupt.c	2006-07-15 22:34:46.845460781 +0000
@@ -69,7 +69,7 @@
 		enable_lasat_irq(irq);
 }
 
-static struct hw_interrupt_type lasat_irq_type = {
+static struct irq_chip lasat_irq_type = {
 	.typename = "Lasat",
 	.startup = startup_lasat_irq,
 	.shutdown = shutdown_lasat_irq,
diff -urN linux-2.6.18-rc1/arch/mips/lasat/setup.c linux-2.6.18-rc2/arch/mips/lasat/setup.c
--- linux-2.6.18-rc1/arch/mips/lasat/setup.c	2006-07-15 22:34:41.664898440 +0000
+++ linux-2.6.18-rc2/arch/mips/lasat/setup.c	2006-07-15 22:34:46.845460781 +0000
@@ -115,12 +115,9 @@
 	mips_hpt_frequency = lasat_board_info.li_cpu_hz / 2;
 }
 
-static void lasat_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
-
-	write_c0_compare(
-		read_c0_count() +
-		mips_hpt_frequency / HZ);
+	write_c0_compare( read_c0_count() + mips_hpt_frequency / HZ);
 	change_c0_status(ST0_IM, IE_IRQ0 | IE_IRQ5);
 }
 
@@ -170,7 +167,6 @@
 	lasat_reboot_setup();
 
 	board_time_init = lasat_time_init;
-	board_timer_setup = lasat_timer_setup;
 
 #ifdef CONFIG_DS1603
 	ds1603 = &ds_defs[mips_machtype];
diff -urN linux-2.6.18-rc1/arch/mips/mips-boards/atlas/atlas_int.c linux-2.6.18-rc2/arch/mips/mips-boards/atlas/atlas_int.c
--- linux-2.6.18-rc1/arch/mips/mips-boards/atlas/atlas_int.c	2006-07-15 22:34:41.664898440 +0000
+++ linux-2.6.18-rc2/arch/mips/mips-boards/atlas/atlas_int.c	2006-07-15 22:34:46.845460781 +0000
@@ -73,7 +73,7 @@
 		enable_atlas_irq(irq);
 }
 
-static struct hw_interrupt_type atlas_irq_type = {
+static struct irq_chip atlas_irq_type = {
 	.typename = "Atlas",
 	.startup = startup_atlas_irq,
 	.shutdown = shutdown_atlas_irq,
diff -urN linux-2.6.18-rc1/arch/mips/mips-boards/atlas/atlas_setup.c linux-2.6.18-rc2/arch/mips/mips-boards/atlas/atlas_setup.c
--- linux-2.6.18-rc1/arch/mips/mips-boards/atlas/atlas_setup.c	2006-07-15 22:34:41.664898440 +0000
+++ linux-2.6.18-rc2/arch/mips/mips-boards/atlas/atlas_setup.c	2006-07-15 22:34:46.845460781 +0000
@@ -35,7 +35,6 @@
 
 extern void mips_reboot_setup(void);
 extern void mips_time_init(void);
-extern void mips_timer_setup(struct irqaction *irq);
 extern unsigned long mips_rtc_get_time(void);
 
 #ifdef CONFIG_KGDB
@@ -63,7 +62,6 @@
 	mips_reboot_setup();
 
 	board_time_init = mips_time_init;
-	board_timer_setup = mips_timer_setup;
 	rtc_mips_get_time = mips_rtc_get_time;
 }
 
diff -urN linux-2.6.18-rc1/arch/mips/mips-boards/generic/memory.c linux-2.6.18-rc2/arch/mips/mips-boards/generic/memory.c
--- linux-2.6.18-rc1/arch/mips/mips-boards/generic/memory.c	2006-07-15 22:34:41.664898440 +0000
+++ linux-2.6.18-rc2/arch/mips/mips-boards/generic/memory.c	2006-07-15 22:34:46.845460781 +0000
@@ -47,43 +47,45 @@
 };
 #endif
 
+/* determined physical memory size, not overridden by command line args  */
+unsigned long physical_memsize = 0L;
+
 struct prom_pmemblock * __init prom_getmdesc(void)
 {
 	char *memsize_str;
 	unsigned int memsize;
 	char cmdline[CL_SIZE], *ptr;
 
-	/* Check the command line first for a memsize directive */
-	strcpy(cmdline, arcs_cmdline);
-	ptr = strstr(cmdline, "memsize=");
-	if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
-		ptr = strstr(ptr, " memsize=");
-
-	if (ptr) {
-		memsize = memparse(ptr + 8, &ptr);
-	}
-	else {
-		/* otherwise look in the environment */
-		memsize_str = prom_getenv("memsize");
-		if (!memsize_str) {
-			prom_printf("memsize not set in boot prom, set to default (32Mb)\n");
-			memsize = 0x02000000;
-		} else {
+	/* otherwise look in the environment */
+	memsize_str = prom_getenv("memsize");
+	if (!memsize_str) {
+		prom_printf("memsize not set in boot prom, set to default (32Mb)\n");
+		physical_memsize = 0x02000000;
+	} else {
 #ifdef DEBUG
-			prom_printf("prom_memsize = %s\n", memsize_str);
+		prom_printf("prom_memsize = %s\n", memsize_str);
 #endif
-			memsize = simple_strtol(memsize_str, NULL, 0);
-		}
+		physical_memsize = simple_strtol(memsize_str, NULL, 0);
 	}
 
 #ifdef CONFIG_CPU_BIG_ENDIAN
-	/*
-	 * SOC-it swaps, or perhaps doesn't swap, when DMA'ing the last
-	 * word of physical memory
-	 */
-	memsize -= PAGE_SIZE;
+	/* SOC-it swaps, or perhaps doesn't swap, when DMA'ing the last
+	   word of physical memory */
+	physical_memsize -= PAGE_SIZE;
 #endif
 
+	/* Check the command line for a memsize directive that overrides
+	   the physical/default amount */
+	strcpy(cmdline, arcs_cmdline);
+	ptr = strstr(cmdline, "memsize=");
+	if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
+		ptr = strstr(ptr, " memsize=");
+
+	if (ptr)
+		memsize = memparse(ptr + 8, &ptr);
+	else
+		memsize = physical_memsize;
+
 	memset(mdesc, 0, sizeof(mdesc));
 
 	mdesc[0].type = yamon_dontuse;
diff -urN linux-2.6.18-rc1/arch/mips/mips-boards/generic/time.c linux-2.6.18-rc2/arch/mips/mips-boards/generic/time.c
--- linux-2.6.18-rc1/arch/mips/mips-boards/generic/time.c	2006-07-15 22:34:41.664898440 +0000
+++ linux-2.6.18-rc2/arch/mips/mips-boards/generic/time.c	2006-07-15 22:34:46.849461215 +0000
@@ -228,9 +228,7 @@
 
 void __init mips_time_init(void)
 {
-	unsigned int est_freq, flags;
-
-	local_irq_save(flags);
+	unsigned int est_freq;
 
         /* Set Data mode - binary. */
         CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
@@ -241,11 +239,9 @@
 	       (est_freq%1000000)*100/1000000);
 
         cpu_khz = est_freq / 1000;
-
-	local_irq_restore(flags);
 }
 
-void __init mips_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
 	if (cpu_has_veic) {
 		set_vi_handler (MSC01E_INT_CPUCTR, mips_timer_dispatch);
diff -urN linux-2.6.18-rc1/arch/mips/mips-boards/malta/malta_setup.c linux-2.6.18-rc2/arch/mips/mips-boards/malta/malta_setup.c
--- linux-2.6.18-rc1/arch/mips/mips-boards/malta/malta_setup.c	2006-07-15 22:34:41.668898874 +0000
+++ linux-2.6.18-rc2/arch/mips/mips-boards/malta/malta_setup.c	2006-07-15 22:34:46.849461215 +0000
@@ -19,7 +19,7 @@
 #include <linux/sched.h>
 #include <linux/ioport.h>
 #include <linux/pci.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 
 #ifdef CONFIG_MTD
 #include <linux/mtd/partitions.h>
@@ -44,7 +44,6 @@
 
 extern void mips_reboot_setup(void);
 extern void mips_time_init(void);
-extern void mips_timer_setup(struct irqaction *irq);
 extern unsigned long mips_rtc_get_time(void);
 
 #ifdef CONFIG_KGDB
@@ -223,6 +222,5 @@
 	mips_reboot_setup();
 
 	board_time_init = mips_time_init;
-	board_timer_setup = mips_timer_setup;
 	rtc_mips_get_time = mips_rtc_get_time;
 }
diff -urN linux-2.6.18-rc1/arch/mips/mips-boards/sead/sead_setup.c linux-2.6.18-rc2/arch/mips/mips-boards/sead/sead_setup.c
--- linux-2.6.18-rc1/arch/mips/mips-boards/sead/sead_setup.c	2006-07-15 22:34:41.668898874 +0000
+++ linux-2.6.18-rc2/arch/mips/mips-boards/sead/sead_setup.c	2006-07-15 22:34:46.849461215 +0000
@@ -35,7 +35,6 @@
 
 extern void mips_reboot_setup(void);
 extern void mips_time_init(void);
-extern void mips_timer_setup(struct irqaction *irq);
 
 static void __init serial_init(void);
 
@@ -51,7 +50,6 @@
 	serial_init ();
 
 	board_time_init = mips_time_init;
-	board_timer_setup = mips_timer_setup;
 
 	mips_reboot_setup();
 }
diff -urN linux-2.6.18-rc1/arch/mips/mips-boards/sim/Makefile linux-2.6.18-rc2/arch/mips/mips-boards/sim/Makefile
--- linux-2.6.18-rc1/arch/mips/mips-boards/sim/Makefile	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/mips/mips-boards/sim/Makefile	2006-07-15 22:34:46.849461215 +0000
@@ -15,6 +15,5 @@
 # 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
 #
 
-obj-y := sim_setup.o sim_mem.o sim_time.o sim_printf.o sim_int.o sim_irq.o \
-	sim_cmdline.o
+obj-y := sim_setup.o sim_mem.o sim_time.o sim_printf.o sim_int.o sim_cmdline.o
 obj-$(CONFIG_SMP) += sim_smp.o
diff -urN linux-2.6.18-rc1/arch/mips/mips-boards/sim/sim_IRQ.c linux-2.6.18-rc2/arch/mips/mips-boards/sim/sim_IRQ.c
--- linux-2.6.18-rc1/arch/mips/mips-boards/sim/sim_IRQ.c	2006-07-15 22:34:41.668898874 +0000
+++ linux-2.6.18-rc2/arch/mips/mips-boards/sim/sim_IRQ.c	1970-01-01 00:00:00.000000000 +0000
@@ -1,147 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999, 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Interrupt exception dispatch code.
- */
-
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-/* A lot of complication here is taken away because:
- *
- * 1) We handle one interrupt and return, sitting in a loop and moving across
- *    all the pending IRQ bits in the cause register is _NOT_ the answer, the
- *    common case is one pending IRQ so optimize in that direction.
- *
- * 2) We need not check against bits in the status register IRQ mask, that
- *    would make this routine slow as hell.
- *
- * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in
- *    between like BSD spl() brain-damage.
- *
- * Furthermore, the IRQs on the MIPS board look basically (barring software
- * IRQs which we don't use at all and all external interrupt sources are
- * combined together on hardware interrupt 0 (MIPS IRQ 2)) like:
- *
- *	MIPS IRQ	Source
- *      --------        ------
- *             0	Software (ignored)
- *             1        Software (ignored)
- *             2        Combined hardware interrupt (hw0)
- *             3        Hardware (ignored)
- *             4        Hardware (ignored)
- *             5        Hardware (ignored)
- *             6        Hardware (ignored)
- *             7        R4k timer (what we use)
- *
- * Note: On the SEAD board thing are a little bit different.
- *       Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired
- *       wired to UART1.
- *
- * We handle the IRQ according to _our_ priority which is:
- *
- * Highest ----     R4k Timer
- * Lowest  ----     Combined hardware interrupt
- *
- * then we just return, if multiple IRQs are pending then we will just take
- * another exception, big deal.
- */
-
-	.text
-	.set	noreorder
-	.set	noat
-	.align	5
-	NESTED(mipsIRQ, PT_SIZE, sp)
-	SAVE_ALL
-	CLI
-	.set	at
-
-	mfc0	s0, CP0_CAUSE		# get irq bits
-	mfc0	s1, CP0_STATUS		# get irq mask
-	and	s0, s1
-
-	/* First we check for r4k counter/timer IRQ. */
-	andi	a0, s0, CAUSEF_IP7
-	beq	a0, zero, 1f
-	 andi	a0, s0, CAUSEF_IP2	# delay slot, check hw0 interrupt
-
-	/* Wheee, a timer interrupt. */
-	move	a0, sp
-	jal	mips_timer_interrupt
-	 nop
-
-	j	ret_from_irq
-	 nop
-
-1:
-#if defined(CONFIG_MIPS_SEAD)
-	beq	a0, zero, 1f
-	 andi	a0, s0, CAUSEF_IP3	# delay slot, check hw1 interrupt
-#else
-	beq	a0, zero, 1f		# delay slot, check hw3 interrupt
-	 andi	a0, s0, CAUSEF_IP5
-#endif
-
-	/* Wheee, combined hardware level zero interrupt. */
-#if defined(CONFIG_MIPS_ATLAS)
-	jal	atlas_hw0_irqdispatch
-#elif defined(CONFIG_MIPS_MALTA)
-	jal	malta_hw0_irqdispatch
-#elif defined(CONFIG_MIPS_SEAD)
-	jal	sead_hw0_irqdispatch
-#else
-#error "MIPS board not supported\n"
-#endif
-	 move	a0, sp			# delay slot
-
-	j	ret_from_irq
-	 nop				# delay slot
-
-1:
-#if defined(CONFIG_MIPS_SEAD)
-	beq	a0, zero, 1f
-	 andi	a0, s0, CAUSEF_IP5	# delay slot, check hw3 interrupt
-	jal	sead_hw1_irqdispatch
-	 move	a0, sp			# delay slot
-	j	ret_from_irq
-	 nop				# delay slot
-1:
-#endif
-#if defined(CONFIG_MIPS_MALTA)
-	beq	a0, zero, 1f            # check hw3 (coreHI) interrupt
-	 nop
-	jal	corehi_irqdispatch
-	 move	a0, sp
-	j	ret_from_irq
-	 nop
-1:
-#endif
-	/*
-	 * Here by mistake?  This is possible, what can happen is that by the
-	 * time we take the exception the IRQ pin goes low, so just leave if
-	 * this is the case.
-	 */
-	move	a1,s0
-	PRINT("Got interrupt: c0_cause = %08x\n")
-	mfc0	a1, CP0_EPC
-	PRINT("c0_epc = %08x\n")
-
-	j	ret_from_irq
-	 nop
-	END(mipsIRQ)
diff -urN linux-2.6.18-rc1/arch/mips/mips-boards/sim/sim_irq.S linux-2.6.18-rc2/arch/mips/mips-boards/sim/sim_irq.S
--- linux-2.6.18-rc1/arch/mips/mips-boards/sim/sim_irq.S	2006-07-15 22:34:41.668898874 +0000
+++ linux-2.6.18-rc2/arch/mips/mips-boards/sim/sim_irq.S	1970-01-01 00:00:00.000000000 +0000
@@ -1,100 +0,0 @@
-/*
- * Copyright (C) 1999, 2005 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Interrupt exception dispatch code.
- *
- */
-
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-#include <asm/mips-boards/simint.h>
-
-
-	.text
-	.set	noreorder
-	.set	noat
-	.align	5
-	NESTED(simIRQ, PT_SIZE, sp)
-	SAVE_ALL
-	CLI
-	.set	at
-
-	mfc0	s0, CP0_CAUSE		# get irq bits
-	mfc0	s1, CP0_STATUS		# get irq mask
-	andi	s0, ST0_IM		# CAUSE.CE may be non-zero!
-	and	s0, s1
-
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
-	.set	mips32
-	clz	a0, s0
-	.set	mips0
-	negu	a0
-	addu	a0, 31-CAUSEB_IP
-	bltz	a0, spurious
-#else
-	beqz	s0, spurious
-	 li	a0, 7
-
-	and	t0, s0, 0xf000
-	sltiu	t0, t0, 1
-	sll	t0, 2
-	subu	a0, t0
-	sll	s0, t0
-
-	and	t0, s0, 0xc000
-	sltiu	t0, t0, 1
-	sll	t0, 1
-	subu	a0, t0
-	sll	s0, t0
-
-	and	t0, s0, 0x8000
-	sltiu	t0, t0, 1
-	# sll	t0, 0
-	subu	a0, t0
-	# sll	s0, t0
-#endif
-
-#ifdef CASCADE_IRQ
-	 li	a1, CASCADE_IRQ
-	bne	a0, a1, 1f
-	 addu	a0, MIPSCPU_INT_BASE
-
-	jal	CASCADE_DISPATCH
-	 move	 a0, sp
-
-	j	ret_from_irq
-	 nop
-1:
-#else
-	 addu	a0, MIPSCPU_INT_BASE
-#endif
-
-	jal	do_IRQ
-	 move	a1, sp
-
-	j	ret_from_irq
-	 nop
-
-
-spurious:
-	jal	spurious_interrupt
-	 nop
-	j	ret_from_irq
-	 nop
-	END(simIRQ)
diff -urN linux-2.6.18-rc1/arch/mips/mips-boards/sim/sim_setup.c linux-2.6.18-rc2/arch/mips/mips-boards/sim/sim_setup.c
--- linux-2.6.18-rc1/arch/mips/mips-boards/sim/sim_setup.c	2006-07-15 22:34:41.668898874 +0000
+++ linux-2.6.18-rc2/arch/mips/mips-boards/sim/sim_setup.c	2006-07-15 22:34:46.849461215 +0000
@@ -37,7 +37,6 @@
 
 
 extern void sim_time_init(void);
-extern void sim_timer_setup(struct irqaction *irq);
 static void __init serial_init(void);
 unsigned int _isbonito = 0;
 
@@ -56,7 +55,6 @@
 	serial_init();
 
 	board_time_init = sim_time_init;
-	board_timer_setup = sim_timer_setup;
 	prom_printf("Linux started...\n");
 
 #ifdef CONFIG_MT_SMP
diff -urN linux-2.6.18-rc1/arch/mips/mips-boards/sim/sim_time.c linux-2.6.18-rc2/arch/mips/mips-boards/sim/sim_time.c
--- linux-2.6.18-rc1/arch/mips/mips-boards/sim/sim_time.c	2006-07-15 22:34:41.668898874 +0000
+++ linux-2.6.18-rc2/arch/mips/mips-boards/sim/sim_time.c	2006-07-15 22:34:46.849461215 +0000
@@ -33,8 +33,6 @@
 
 unsigned long cpu_khz;
 
-extern asmlinkage void ll_local_timer_interrupt(int irq, struct pt_regs *regs);
-
 irqreturn_t sim_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
 #ifdef CONFIG_SMP
@@ -185,7 +183,7 @@
 }
 
 
-void __init sim_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
 	if (cpu_has_veic) {
 		set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
diff -urN linux-2.6.18-rc1/arch/mips/mm/c-r4k.c linux-2.6.18-rc2/arch/mips/mm/c-r4k.c
--- linux-2.6.18-rc1/arch/mips/mm/c-r4k.c	2006-07-15 22:34:41.668898874 +0000
+++ linux-2.6.18-rc2/arch/mips/mm/c-r4k.c	2006-07-15 22:34:46.849461215 +0000
@@ -578,7 +578,7 @@
 	 * secondary cache will result in any entries in the primary caches
 	 * also getting invalidated which hopefully is a bit more economical.
 	 */
-	if (cpu_has_subset_pcaches) {
+	if (cpu_has_inclusive_pcaches) {
 		unsigned long addr = (unsigned long) page_address(page);
 
 		r4k_blast_scache_page(addr);
@@ -634,7 +634,7 @@
 	/* Catch bad driver code */
 	BUG_ON(size == 0);
 
-	if (cpu_has_subset_pcaches) {
+	if (cpu_has_inclusive_pcaches) {
 		if (size >= scache_size)
 			r4k_blast_scache();
 		else
@@ -662,7 +662,7 @@
 	/* Catch bad driver code */
 	BUG_ON(size == 0);
 
-	if (cpu_has_subset_pcaches) {
+	if (cpu_has_inclusive_pcaches) {
 		if (size >= scache_size)
 			r4k_blast_scache();
 		else
@@ -862,15 +862,18 @@
 		break;
 
 	case CPU_VR4133:
-		write_c0_config(config & ~CONF_EB);
+		write_c0_config(config & ~VR41_CONF_P4K);
 	case CPU_VR4131:
 		/* Workaround for cache instruction bug of VR4131 */
 		if (c->processor_id == 0x0c80U || c->processor_id == 0x0c81U ||
 		    c->processor_id == 0x0c82U) {
-			config &= ~0x00000030U;
-			config |= 0x00410000U;
+			config |= 0x00400000U;
+			if (c->processor_id == 0x0c80U)
+				config |= VR41_CONF_BP;
 			write_c0_config(config);
-		}
+		} else
+			c->options |= MIPS_CPU_CACHE_CDEX_P;
+
 		icache_size = 1 << (10 + ((config & CONF_IC) >> 9));
 		c->icache.linesz = 16 << ((config & CONF_IB) >> 5);
 		c->icache.ways = 2;
@@ -880,8 +883,6 @@
 		c->dcache.linesz = 16 << ((config & CONF_DB) >> 4);
 		c->dcache.ways = 2;
 		c->dcache.waybit = __ffs(dcache_size/2);
-
-		c->options |= MIPS_CPU_CACHE_CDEX_P;
 		break;
 
 	case CPU_VR41XX:
@@ -1192,7 +1193,7 @@
 	printk("Unified secondary cache %ldkB %s, linesize %d bytes.\n",
 	       scache_size >> 10, way_string[c->scache.ways], c->scache.linesz);
 
-	c->options |= MIPS_CPU_SUBSET_CACHES;
+	c->options |= MIPS_CPU_INCLUSIVE_CACHES;
 }
 
 void au1x00_fixup_config_od(void)
diff -urN linux-2.6.18-rc1/arch/mips/mm/init.c linux-2.6.18-rc2/arch/mips/mm/init.c
--- linux-2.6.18-rc1/arch/mips/mm/init.c	2006-07-15 22:34:41.668898874 +0000
+++ linux-2.6.18-rc2/arch/mips/mm/init.c	2006-07-15 22:34:46.853461649 +0000
@@ -139,10 +139,36 @@
 #ifndef CONFIG_NEED_MULTIPLE_NODES
 extern void pagetable_init(void);
 
+static int __init page_is_ram(unsigned long pagenr)
+{
+	int i;
+
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		unsigned long addr, end;
+
+		if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
+			/* not usable memory */
+			continue;
+
+		addr = PFN_UP(boot_mem_map.map[i].addr);
+		end = PFN_DOWN(boot_mem_map.map[i].addr +
+			       boot_mem_map.map[i].size);
+
+		if (pagenr >= addr && pagenr < end)
+			return 1;
+	}
+
+	return 0;
+}
+
 void __init paging_init(void)
 {
-	unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0};
+	unsigned long zones_size[] = { [0 ... MAX_NR_ZONES - 1] = 0 };
 	unsigned long max_dma, high, low;
+#ifndef CONFIG_FLATMEM
+	unsigned long zholes_size[] = { [0 ... MAX_NR_ZONES - 1] = 0 };
+	unsigned long i, j, pfn;
+#endif
 
 	pagetable_init();
 
@@ -174,29 +200,16 @@
 		zones_size[ZONE_HIGHMEM] = high - low;
 #endif
 
+#ifdef CONFIG_FLATMEM
 	free_area_init(zones_size);
-}
-
-static inline int page_is_ram(unsigned long pagenr)
-{
-	int i;
-
-	for (i = 0; i < boot_mem_map.nr_map; i++) {
-		unsigned long addr, end;
-
-		if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
-			/* not usable memory */
-			continue;
-
-		addr = PFN_UP(boot_mem_map.map[i].addr);
-		end = PFN_DOWN(boot_mem_map.map[i].addr +
-			       boot_mem_map.map[i].size);
-
-		if (pagenr >= addr && pagenr < end)
-			return 1;
-	}
-
-	return 0;
+#else
+	pfn = 0;
+	for (i = 0; i < MAX_NR_ZONES; i++)
+		for (j = 0; j < zones_size[i]; j++, pfn++)
+			if (!page_is_ram(pfn))
+				zholes_size[i]++;
+	free_area_init_node(0, NODE_DATA(0), zones_size, 0, zholes_size);
+#endif
 }
 
 static struct kcore_list kcore_mem, kcore_vmalloc;
@@ -213,9 +226,9 @@
 #ifdef CONFIG_DISCONTIGMEM
 #error "CONFIG_HIGHMEM and CONFIG_DISCONTIGMEM dont work together yet"
 #endif
-	max_mapnr = num_physpages = highend_pfn;
+	max_mapnr = highend_pfn;
 #else
-	max_mapnr = num_physpages = max_low_pfn;
+	max_mapnr = max_low_pfn;
 #endif
 	high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT);
 
@@ -229,6 +242,7 @@
 			if (PageReserved(pfn_to_page(tmp)))
 				reservedpages++;
 		}
+	num_physpages = ram;
 
 #ifdef CONFIG_HIGHMEM
 	for (tmp = highstart_pfn; tmp < highend_pfn; tmp++) {
@@ -247,6 +261,7 @@
 		totalhigh_pages++;
 	}
 	totalram_pages += totalhigh_pages;
+	num_physpages += totalhigh_pages;
 #endif
 
 	codesize =  (unsigned long) &_etext - (unsigned long) &_text;
diff -urN linux-2.6.18-rc1/arch/mips/mm/pgtable.c linux-2.6.18-rc2/arch/mips/mm/pgtable.c
--- linux-2.6.18-rc1/arch/mips/mm/pgtable.c	2006-07-15 22:34:41.668898874 +0000
+++ linux-2.6.18-rc2/arch/mips/mm/pgtable.c	2006-07-15 22:34:46.853461649 +0000
@@ -15,6 +15,8 @@
 	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
 	pfn = max_mapnr;
 	while (pfn-- > 0) {
+		if (!pfn_valid(pfn))
+			continue;
 		page = pfn_to_page(pfn);
 		total++;
 		if (PageHighMem(page))
diff -urN linux-2.6.18-rc1/arch/mips/mm/tlbex.c linux-2.6.18-rc2/arch/mips/mm/tlbex.c
--- linux-2.6.18-rc1/arch/mips/mm/tlbex.c	2006-07-15 22:34:41.672899308 +0000
+++ linux-2.6.18-rc2/arch/mips/mm/tlbex.c	2006-07-15 22:34:46.853461649 +0000
@@ -5,7 +5,7 @@
  *
  * Synthesize TLB refill handlers at runtime.
  *
- * Copyright (C) 2004,2005 by Thiemo Seufer
+ * Copyright (C) 2004,2005,2006 by Thiemo Seufer
  * Copyright (C) 2005  Maciej W. Rozycki
  * Copyright (C) 2006  Ralf Baechle (ralf@linux-mips.org)
  *
@@ -35,8 +35,6 @@
 #include <asm/smp.h>
 #include <asm/war.h>
 
-/* #define DEBUG_TLB */
-
 static __init int __attribute__((unused)) r45k_bvahwbug(void)
 {
 	/* XXX: We should probe for the presence of this bug, but we don't. */
@@ -728,6 +726,7 @@
 {
 	long pgdc = (long)pgd_current;
 	u32 *p;
+	int i;
 
 	memset(tlb_handler, 0, sizeof(tlb_handler));
 	p = tlb_handler;
@@ -753,16 +752,14 @@
 	if (p > tlb_handler + 32)
 		panic("TLB refill handler space exceeded");
 
-	printk("Synthesized TLB refill handler (%u instructions).\n",
-	       (unsigned int)(p - tlb_handler));
-#ifdef DEBUG_TLB
-	{
-		int i;
+	pr_info("Synthesized TLB refill handler (%u instructions).\n",
+		(unsigned int)(p - tlb_handler));
 
-		for (i = 0; i < (p - tlb_handler); i++)
-			printk("%08x\n", tlb_handler[i]);
-	}
-#endif
+	pr_debug("\t.set push\n");
+	pr_debug("\t.set noreorder\n");
+	for (i = 0; i < (p - tlb_handler); i++)
+		pr_debug("\t.word 0x%08x\n", tlb_handler[i]);
+	pr_debug("\t.set pop\n");
 
 	memcpy((void *)ebase, tlb_handler, 0x80);
 }
@@ -1175,6 +1172,7 @@
 	struct reloc *r = relocs;
 	u32 *f;
 	unsigned int final_len;
+	int i;
 
 	memset(tlb_handler, 0, sizeof(tlb_handler));
 	memset(labels, 0, sizeof(labels));
@@ -1272,24 +1270,21 @@
 #endif /* CONFIG_64BIT */
 
 	resolve_relocs(relocs, labels);
-	printk("Synthesized TLB refill handler (%u instructions).\n",
-	       final_len);
-
-#ifdef DEBUG_TLB
-	{
-		int i;
+	pr_info("Synthesized TLB refill handler (%u instructions).\n",
+		final_len);
 
-		f = final_handler;
+	f = final_handler;
 #ifdef CONFIG_64BIT
-		if (final_len > 32)
-			final_len = 64;
-		else
-			f = final_handler + 32;
+	if (final_len > 32)
+		final_len = 64;
+	else
+		f = final_handler + 32;
 #endif /* CONFIG_64BIT */
-		for (i = 0; i < final_len; i++)
-			printk("%08x\n", f[i]);
-	}
-#endif
+	pr_debug("\t.set push\n");
+	pr_debug("\t.set noreorder\n");
+	for (i = 0; i < final_len; i++)
+		pr_debug("\t.word 0x%08x\n", f[i]);
+	pr_debug("\t.set pop\n");
 
 	memcpy((void *)ebase, final_handler, 0x100);
 }
@@ -1522,6 +1517,7 @@
 	u32 *p = handle_tlbl;
 	struct label *l = labels;
 	struct reloc *r = relocs;
+	int i;
 
 	memset(handle_tlbl, 0, sizeof(handle_tlbl));
 	memset(labels, 0, sizeof(labels));
@@ -1541,17 +1537,14 @@
 		panic("TLB load handler fastpath space exceeded");
 
 	resolve_relocs(relocs, labels);
-	printk("Synthesized TLB load handler fastpath (%u instructions).\n",
-	       (unsigned int)(p - handle_tlbl));
-
-#ifdef DEBUG_TLB
-	{
-		int i;
+	pr_info("Synthesized TLB load handler fastpath (%u instructions).\n",
+		(unsigned int)(p - handle_tlbl));
 
-		for (i = 0; i < (p - handle_tlbl); i++)
-			printk("%08x\n", handle_tlbl[i]);
-	}
-#endif
+	pr_debug("\t.set push\n");
+	pr_debug("\t.set noreorder\n");
+	for (i = 0; i < (p - handle_tlbl); i++)
+		pr_debug("\t.word 0x%08x\n", handle_tlbl[i]);
+	pr_debug("\t.set pop\n");
 }
 
 static void __init build_r3000_tlb_store_handler(void)
@@ -1559,6 +1552,7 @@
 	u32 *p = handle_tlbs;
 	struct label *l = labels;
 	struct reloc *r = relocs;
+	int i;
 
 	memset(handle_tlbs, 0, sizeof(handle_tlbs));
 	memset(labels, 0, sizeof(labels));
@@ -1578,17 +1572,14 @@
 		panic("TLB store handler fastpath space exceeded");
 
 	resolve_relocs(relocs, labels);
-	printk("Synthesized TLB store handler fastpath (%u instructions).\n",
-	       (unsigned int)(p - handle_tlbs));
-
-#ifdef DEBUG_TLB
-	{
-		int i;
+	pr_info("Synthesized TLB store handler fastpath (%u instructions).\n",
+		(unsigned int)(p - handle_tlbs));
 
-		for (i = 0; i < (p - handle_tlbs); i++)
-			printk("%08x\n", handle_tlbs[i]);
-	}
-#endif
+	pr_debug("\t.set push\n");
+	pr_debug("\t.set noreorder\n");
+	for (i = 0; i < (p - handle_tlbs); i++)
+		pr_debug("\t.word 0x%08x\n", handle_tlbs[i]);
+	pr_debug("\t.set pop\n");
 }
 
 static void __init build_r3000_tlb_modify_handler(void)
@@ -1596,6 +1587,7 @@
 	u32 *p = handle_tlbm;
 	struct label *l = labels;
 	struct reloc *r = relocs;
+	int i;
 
 	memset(handle_tlbm, 0, sizeof(handle_tlbm));
 	memset(labels, 0, sizeof(labels));
@@ -1615,17 +1607,14 @@
 		panic("TLB modify handler fastpath space exceeded");
 
 	resolve_relocs(relocs, labels);
-	printk("Synthesized TLB modify handler fastpath (%u instructions).\n",
-	       (unsigned int)(p - handle_tlbm));
-
-#ifdef DEBUG_TLB
-	{
-		int i;
+	pr_info("Synthesized TLB modify handler fastpath (%u instructions).\n",
+		(unsigned int)(p - handle_tlbm));
 
-		for (i = 0; i < (p - handle_tlbm); i++)
-			printk("%08x\n", handle_tlbm[i]);
-	}
-#endif
+	pr_debug("\t.set push\n");
+	pr_debug("\t.set noreorder\n");
+	for (i = 0; i < (p - handle_tlbm); i++)
+		pr_debug("\t.word 0x%08x\n", handle_tlbm[i]);
+	pr_debug("\t.set pop\n");
 }
 
 /*
@@ -1677,6 +1666,7 @@
 	u32 *p = handle_tlbl;
 	struct label *l = labels;
 	struct reloc *r = relocs;
+	int i;
 
 	memset(handle_tlbl, 0, sizeof(handle_tlbl));
 	memset(labels, 0, sizeof(labels));
@@ -1704,17 +1694,14 @@
 		panic("TLB load handler fastpath space exceeded");
 
 	resolve_relocs(relocs, labels);
-	printk("Synthesized TLB load handler fastpath (%u instructions).\n",
-	       (unsigned int)(p - handle_tlbl));
+	pr_info("Synthesized TLB load handler fastpath (%u instructions).\n",
+		(unsigned int)(p - handle_tlbl));
 
-#ifdef DEBUG_TLB
-	{
-		int i;
-
-		for (i = 0; i < (p - handle_tlbl); i++)
-			printk("%08x\n", handle_tlbl[i]);
-	}
-#endif
+	pr_debug("\t.set push\n");
+	pr_debug("\t.set noreorder\n");
+	for (i = 0; i < (p - handle_tlbl); i++)
+		pr_debug("\t.word 0x%08x\n", handle_tlbl[i]);
+	pr_debug("\t.set pop\n");
 }
 
 static void __init build_r4000_tlb_store_handler(void)
@@ -1722,6 +1709,7 @@
 	u32 *p = handle_tlbs;
 	struct label *l = labels;
 	struct reloc *r = relocs;
+	int i;
 
 	memset(handle_tlbs, 0, sizeof(handle_tlbs));
 	memset(labels, 0, sizeof(labels));
@@ -1740,17 +1728,14 @@
 		panic("TLB store handler fastpath space exceeded");
 
 	resolve_relocs(relocs, labels);
-	printk("Synthesized TLB store handler fastpath (%u instructions).\n",
-	       (unsigned int)(p - handle_tlbs));
+	pr_info("Synthesized TLB store handler fastpath (%u instructions).\n",
+		(unsigned int)(p - handle_tlbs));
 
-#ifdef DEBUG_TLB
-	{
-		int i;
-
-		for (i = 0; i < (p - handle_tlbs); i++)
-			printk("%08x\n", handle_tlbs[i]);
-	}
-#endif
+	pr_debug("\t.set push\n");
+	pr_debug("\t.set noreorder\n");
+	for (i = 0; i < (p - handle_tlbs); i++)
+		pr_debug("\t.word 0x%08x\n", handle_tlbs[i]);
+	pr_debug("\t.set pop\n");
 }
 
 static void __init build_r4000_tlb_modify_handler(void)
@@ -1758,6 +1743,7 @@
 	u32 *p = handle_tlbm;
 	struct label *l = labels;
 	struct reloc *r = relocs;
+	int i;
 
 	memset(handle_tlbm, 0, sizeof(handle_tlbm));
 	memset(labels, 0, sizeof(labels));
@@ -1777,17 +1763,14 @@
 		panic("TLB modify handler fastpath space exceeded");
 
 	resolve_relocs(relocs, labels);
-	printk("Synthesized TLB modify handler fastpath (%u instructions).\n",
-	       (unsigned int)(p - handle_tlbm));
+	pr_info("Synthesized TLB modify handler fastpath (%u instructions).\n",
+		(unsigned int)(p - handle_tlbm));
 
-#ifdef DEBUG_TLB
-	{
-		int i;
-
-		for (i = 0; i < (p - handle_tlbm); i++)
-			printk("%08x\n", handle_tlbm[i]);
-	}
-#endif
+	pr_debug("\t.set push\n");
+	pr_debug("\t.set noreorder\n");
+	for (i = 0; i < (p - handle_tlbm); i++)
+		pr_debug("\t.word 0x%08x\n", handle_tlbm[i]);
+	pr_debug("\t.set pop\n");
 }
 
 void __init build_tlb_refill_handler(void)
diff -urN linux-2.6.18-rc1/arch/mips/momentum/jaguar_atx/setup.c linux-2.6.18-rc2/arch/mips/momentum/jaguar_atx/setup.c
--- linux-2.6.18-rc1/arch/mips/momentum/jaguar_atx/setup.c	2006-07-15 22:34:41.672899308 +0000
+++ linux-2.6.18-rc2/arch/mips/momentum/jaguar_atx/setup.c	2006-07-15 22:34:46.853461649 +0000
@@ -212,7 +212,7 @@
 	return 0;
 }
 
-void momenco_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
 	setup_irq(8, irq);
 }
@@ -226,7 +226,6 @@
 	wire_stupidity_into_tlb();
 
 	mips_hpt_frequency = cpu_clock / 2;
-	board_timer_setup = momenco_timer_setup;
 
 	rtc_mips_get_time = m48t37y_get_time;
 	rtc_mips_set_time = m48t37y_set_time;
diff -urN linux-2.6.18-rc1/arch/mips/momentum/ocelot_3/setup.c linux-2.6.18-rc2/arch/mips/momentum/ocelot_3/setup.c
--- linux-2.6.18-rc1/arch/mips/momentum/ocelot_3/setup.c	2006-07-15 22:34:41.672899308 +0000
+++ linux-2.6.18-rc2/arch/mips/momentum/ocelot_3/setup.c	2006-07-15 22:34:46.857462083 +0000
@@ -197,7 +197,7 @@
 	return 0;
 }
 
-void momenco_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
 	setup_irq(7, irq);	/* Timer interrupt, unmask status IM7 */
 }
@@ -211,7 +211,6 @@
 	 * the Rm7900 and the Rm7065C
 	 */
 	mips_hpt_frequency = cpu_clock / 2;
-	board_timer_setup = momenco_timer_setup;
 
 	rtc_mips_get_time = m48t37y_get_time;
 	rtc_mips_set_time = m48t37y_set_time;
diff -urN linux-2.6.18-rc1/arch/mips/momentum/ocelot_c/cpci-irq.c linux-2.6.18-rc2/arch/mips/momentum/ocelot_c/cpci-irq.c
--- linux-2.6.18-rc1/arch/mips/momentum/ocelot_c/cpci-irq.c	2006-07-15 22:34:41.672899308 +0000
+++ linux-2.6.18-rc2/arch/mips/momentum/ocelot_c/cpci-irq.c	2006-07-15 22:34:46.857462083 +0000
@@ -128,7 +128,7 @@
 
 #define shutdown_cpci_irq	disable_cpci_irq
 
-struct hw_interrupt_type cpci_irq_type = {
+struct irq_chip cpci_irq_type = {
 	.typename = "CPCI/FPGA",
 	.startup = startup_cpci_irq,
 	.shutdown = shutdown_cpci_irq,
diff -urN linux-2.6.18-rc1/arch/mips/momentum/ocelot_c/setup.c linux-2.6.18-rc2/arch/mips/momentum/ocelot_c/setup.c
--- linux-2.6.18-rc1/arch/mips/momentum/ocelot_c/setup.c	2006-07-15 22:34:41.672899308 +0000
+++ linux-2.6.18-rc2/arch/mips/momentum/ocelot_c/setup.c	2006-07-15 22:34:46.857462083 +0000
@@ -209,7 +209,7 @@
 	return 0;
 }
 
-void momenco_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
 	setup_irq(7, irq);
 }
@@ -224,7 +224,6 @@
 #error Unknown CPU for this board
 #endif
 	printk("momenco_time_init cpu_clock=%d\n", cpu_clock);
-	board_timer_setup = momenco_timer_setup;
 
 	rtc_mips_get_time = m48t37y_get_time;
 	rtc_mips_set_time = m48t37y_set_time;
diff -urN linux-2.6.18-rc1/arch/mips/momentum/ocelot_c/uart-irq.c linux-2.6.18-rc2/arch/mips/momentum/ocelot_c/uart-irq.c
--- linux-2.6.18-rc1/arch/mips/momentum/ocelot_c/uart-irq.c	2006-07-15 22:34:41.672899308 +0000
+++ linux-2.6.18-rc2/arch/mips/momentum/ocelot_c/uart-irq.c	2006-07-15 22:34:46.857462083 +0000
@@ -121,7 +121,7 @@
 
 #define shutdown_uart_irq	disable_uart_irq
 
-struct hw_interrupt_type uart_irq_type = {
+struct irq_chip uart_irq_type = {
 	.typename = "UART/FPGA",
 	.startup = startup_uart_irq,
 	.shutdown = shutdown_uart_irq,
diff -urN linux-2.6.18-rc1/arch/mips/oprofile/op_model_mipsxx.c linux-2.6.18-rc2/arch/mips/oprofile/op_model_mipsxx.c
--- linux-2.6.18-rc1/arch/mips/oprofile/op_model_mipsxx.c	2006-07-15 22:34:41.672899308 +0000
+++ linux-2.6.18-rc2/arch/mips/oprofile/op_model_mipsxx.c	2006-07-15 22:34:46.857462083 +0000
@@ -49,6 +49,7 @@
 	default:							\
 		BUG();							\
 	}								\
+	return 0;							\
 }									\
 									\
 static inline void w_c0_ ## r ## n(unsigned int value)			\
@@ -65,6 +66,7 @@
 	default:							\
 		BUG();							\
 	}								\
+	return;								\
 }									\
 
 __define_perf_accessors(perfcntr, 0, 2)
diff -urN linux-2.6.18-rc1/arch/mips/pci/fixup-emma2rh.c linux-2.6.18-rc2/arch/mips/pci/fixup-emma2rh.c
--- linux-2.6.18-rc1/arch/mips/pci/fixup-emma2rh.c	2006-07-15 22:34:41.676899742 +0000
+++ linux-2.6.18-rc2/arch/mips/pci/fixup-emma2rh.c	2006-07-15 22:34:46.857462083 +0000
@@ -23,7 +23,6 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/types.h>
diff -urN linux-2.6.18-rc1/arch/mips/pci/fixup-mpc30x.c linux-2.6.18-rc2/arch/mips/pci/fixup-mpc30x.c
--- linux-2.6.18-rc1/arch/mips/pci/fixup-mpc30x.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/mips/pci/fixup-mpc30x.c	2006-07-15 22:34:46.857462083 +0000
@@ -21,7 +21,6 @@
 #include <linux/pci.h>
 
 #include <asm/vr41xx/mpc30x.h>
-#include <asm/vr41xx/vrc4173.h>
 
 static const int internal_func_irqs[] __initdata = {
 	VRC4173_CASCADE_IRQ,
diff -urN linux-2.6.18-rc1/arch/mips/pci/ops-emma2rh.c linux-2.6.18-rc2/arch/mips/pci/ops-emma2rh.c
--- linux-2.6.18-rc1/arch/mips/pci/ops-emma2rh.c	2006-07-15 22:34:41.676899742 +0000
+++ linux-2.6.18-rc2/arch/mips/pci/ops-emma2rh.c	2006-07-15 22:34:46.861462518 +0000
@@ -23,7 +23,6 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/config.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
diff -urN linux-2.6.18-rc1/arch/mips/pci/pci-emma2rh.c linux-2.6.18-rc2/arch/mips/pci/pci-emma2rh.c
--- linux-2.6.18-rc1/arch/mips/pci/pci-emma2rh.c	2006-07-15 22:34:41.680900177 +0000
+++ linux-2.6.18-rc2/arch/mips/pci/pci-emma2rh.c	2006-07-15 22:34:46.865462952 +0000
@@ -23,7 +23,6 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/types.h>
diff -urN linux-2.6.18-rc1/arch/mips/philips/pnx8550/common/int.c linux-2.6.18-rc2/arch/mips/philips/pnx8550/common/int.c
--- linux-2.6.18-rc1/arch/mips/philips/pnx8550/common/int.c	2006-07-15 22:34:41.680900177 +0000
+++ linux-2.6.18-rc2/arch/mips/philips/pnx8550/common/int.c	2006-07-15 22:34:46.865462952 +0000
@@ -207,7 +207,7 @@
 	}
 }
 
-static struct hw_interrupt_type level_irq_type = {
+static struct irq_chip level_irq_type = {
 	.typename =	"PNX Level IRQ",
 	.startup =	startup_irq,
 	.shutdown =	shutdown_irq,
diff -urN linux-2.6.18-rc1/arch/mips/philips/pnx8550/common/setup.c linux-2.6.18-rc2/arch/mips/philips/pnx8550/common/setup.c
--- linux-2.6.18-rc1/arch/mips/philips/pnx8550/common/setup.c	2006-07-15 22:34:41.684900611 +0000
+++ linux-2.6.18-rc2/arch/mips/philips/pnx8550/common/setup.c	2006-07-15 22:34:46.869463386 +0000
@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/ioport.h>
+#include <linux/irq.h>
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
@@ -48,10 +49,7 @@
 extern void pnx8550_machine_power_off(void);
 extern struct resource ioport_resource;
 extern struct resource iomem_resource;
-extern void (*board_time_init)(void);
 extern void pnx8550_time_init(void);
-extern void (*board_timer_setup)(struct irqaction *irq);
-extern void pnx8550_timer_setup(struct irqaction *irq);
 extern void rs_kgdb_hook(int tty_no);
 extern void prom_printf(char *fmt, ...);
 extern char *prom_getcmdline(void);
@@ -110,7 +108,6 @@
         pm_power_off = pnx8550_machine_power_off;
 
 	board_time_init = pnx8550_time_init;
-	board_timer_setup = pnx8550_timer_setup;
 
 	/* Clear the Global 2 Register, PCI Inta Output Enable Registers
 	   Bit 1:Enable DAC Powerdown
diff -urN linux-2.6.18-rc1/arch/mips/philips/pnx8550/common/time.c linux-2.6.18-rc2/arch/mips/philips/pnx8550/common/time.c
--- linux-2.6.18-rc1/arch/mips/philips/pnx8550/common/time.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/mips/philips/pnx8550/common/time.c	2006-07-15 22:34:46.869463386 +0000
@@ -70,16 +70,7 @@
 	mips_hpt_frequency = 27UL * ((1000000UL * n)/(m * pow2p));
 }
 
-/*
- * pnx8550_timer_setup() - it does the following things:
- *
- * 5) board_timer_setup() -
- *	a) (optional) over-write any choices made above by time_init().
- *	b) machine specific code should setup the timer irqaction.
- *	c) enable the timer interrupt
- */
-
-void __init pnx8550_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
 	int configPR;
 
diff -urN linux-2.6.18-rc1/arch/mips/pmc-sierra/yosemite/setup.c linux-2.6.18-rc2/arch/mips/pmc-sierra/yosemite/setup.c
--- linux-2.6.18-rc1/arch/mips/pmc-sierra/yosemite/setup.c	2006-07-15 22:34:41.684900611 +0000
+++ linux-2.6.18-rc2/arch/mips/pmc-sierra/yosemite/setup.c	2006-07-15 22:34:46.869463386 +0000
@@ -133,14 +133,13 @@
 	return 0;
 }
 
-void yosemite_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
 	setup_irq(7, irq);
 }
 
 void yosemite_time_init(void)
 {
-	board_timer_setup = yosemite_timer_setup;
 	mips_hpt_frequency = cpu_clock / 2;
 mips_hpt_frequency = 33000000 * 3 * 5;
 }
diff -urN linux-2.6.18-rc1/arch/mips/qemu/q-reset.c linux-2.6.18-rc2/arch/mips/qemu/q-reset.c
--- linux-2.6.18-rc1/arch/mips/qemu/q-reset.c	2006-07-15 22:34:41.684900611 +0000
+++ linux-2.6.18-rc2/arch/mips/qemu/q-reset.c	2006-07-15 22:34:46.869463386 +0000
@@ -1,4 +1,3 @@
-#include <linux/config.h>
 
 #include <asm/io.h>
 #include <asm/reboot.h>
diff -urN linux-2.6.18-rc1/arch/mips/qemu/q-setup.c linux-2.6.18-rc2/arch/mips/qemu/q-setup.c
--- linux-2.6.18-rc1/arch/mips/qemu/q-setup.c	2006-07-15 22:34:41.684900611 +0000
+++ linux-2.6.18-rc2/arch/mips/qemu/q-setup.c	2006-07-15 22:34:46.869463386 +0000
@@ -11,7 +11,7 @@
 	return "Qemu";
 }
 
-static void __init qemu_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
 	/* set the clock to 100 Hz */
 	outb_p(0x34,0x43);		/* binary, mode 2, LSB/MSB, ch 0 */
@@ -23,7 +23,5 @@
 void __init plat_mem_setup(void)
 {
 	set_io_port_base(QEMU_PORT_BASE);
-	board_timer_setup = qemu_timer_setup;
-
 	qemu_reboot_setup();
 }
diff -urN linux-2.6.18-rc1/arch/mips/sgi-ip22/ip22-eisa.c linux-2.6.18-rc2/arch/mips/sgi-ip22/ip22-eisa.c
--- linux-2.6.18-rc1/arch/mips/sgi-ip22/ip22-eisa.c	2006-07-15 22:34:41.684900611 +0000
+++ linux-2.6.18-rc2/arch/mips/sgi-ip22/ip22-eisa.c	2006-07-15 22:34:46.869463386 +0000
@@ -144,7 +144,7 @@
 		enable_eisa1_irq(irq);
 }
 
-static struct hw_interrupt_type ip22_eisa1_irq_type = {
+static struct irq_chip ip22_eisa1_irq_type = {
 	.typename	= "IP22 EISA",
 	.startup	= startup_eisa1_irq,
 	.shutdown	= shutdown_eisa1_irq,
@@ -206,7 +206,7 @@
 		enable_eisa2_irq(irq);
 }
 
-static struct hw_interrupt_type ip22_eisa2_irq_type = {
+static struct irq_chip ip22_eisa2_irq_type = {
 	.typename	= "IP22 EISA",
 	.startup	= startup_eisa2_irq,
 	.shutdown	= shutdown_eisa2_irq,
diff -urN linux-2.6.18-rc1/arch/mips/sgi-ip22/ip22-int.c linux-2.6.18-rc2/arch/mips/sgi-ip22/ip22-int.c
--- linux-2.6.18-rc1/arch/mips/sgi-ip22/ip22-int.c	2006-07-15 22:34:41.684900611 +0000
+++ linux-2.6.18-rc2/arch/mips/sgi-ip22/ip22-int.c	2006-07-15 22:34:46.869463386 +0000
@@ -74,7 +74,7 @@
 		enable_local0_irq(irq);
 }
 
-static struct hw_interrupt_type ip22_local0_irq_type = {
+static struct irq_chip ip22_local0_irq_type = {
 	.typename	= "IP22 local 0",
 	.startup	= startup_local0_irq,
 	.shutdown	= shutdown_local0_irq,
@@ -120,7 +120,7 @@
 		enable_local1_irq(irq);
 }
 
-static struct hw_interrupt_type ip22_local1_irq_type = {
+static struct irq_chip ip22_local1_irq_type = {
 	.typename	= "IP22 local 1",
 	.startup	= startup_local1_irq,
 	.shutdown	= shutdown_local1_irq,
@@ -166,7 +166,7 @@
 		enable_local2_irq(irq);
 }
 
-static struct hw_interrupt_type ip22_local2_irq_type = {
+static struct irq_chip ip22_local2_irq_type = {
 	.typename	= "IP22 local 2",
 	.startup	= startup_local2_irq,
 	.shutdown	= shutdown_local2_irq,
@@ -212,7 +212,7 @@
 		enable_local3_irq(irq);
 }
 
-static struct hw_interrupt_type ip22_local3_irq_type = {
+static struct irq_chip ip22_local3_irq_type = {
 	.typename	= "IP22 local 3",
 	.startup	= startup_local3_irq,
 	.shutdown	= shutdown_local3_irq,
@@ -421,7 +421,7 @@
 	mips_cpu_irq_init(SGINT_CPU);
 
 	for (i = SGINT_LOCAL0; i < SGI_INTERRUPTS; i++) {
-		hw_irq_controller *handler;
+		struct irq_chip *handler;
 
 		if (i < SGINT_LOCAL1)
 			handler		= &ip22_local0_irq_type;
diff -urN linux-2.6.18-rc1/arch/mips/sgi-ip22/ip22-time.c linux-2.6.18-rc2/arch/mips/sgi-ip22/ip22-time.c
--- linux-2.6.18-rc1/arch/mips/sgi-ip22/ip22-time.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/mips/sgi-ip22/ip22-time.c	2006-07-15 22:34:46.869463386 +0000
@@ -7,11 +7,12 @@
  * Ralf Baechle or David S. Miller (sorry guys, i'm really not sure)
  *
  * Copyright (C) 2001 by Ladislav Michl
- * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2003, 06 Ralf Baechle (ralf@linux-mips.org)
  */
 #include <linux/bcd.h>
 #include <linux/ds1286.h>
 #include <linux/init.h>
+#include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/kernel_stat.h>
@@ -76,7 +77,7 @@
 	save_control = hpc3c0->rtcregs[RTC_CMD] & 0xff;
 	hpc3c0->rtcregs[RTC_CMD] = save_control | RTC_TE;
 
-	hpc3c0->rtcregs[RTC_YEAR] = BIN2BCD(tm.tm_sec);
+	hpc3c0->rtcregs[RTC_YEAR] = BIN2BCD(tm.tm_year);
 	hpc3c0->rtcregs[RTC_MONTH] = BIN2BCD(tm.tm_mon);
 	hpc3c0->rtcregs[RTC_DATE] = BIN2BCD(tm.tm_mday);
 	hpc3c0->rtcregs[RTC_HOURS] = BIN2BCD(tm.tm_hour);
@@ -198,9 +199,7 @@
 	irq_exit();
 }
 
-extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
-
-static void indy_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
 	/* over-write the handler, we use our own way */
 	irq->handler = no_action;
@@ -216,5 +215,4 @@
 	rtc_mips_set_time = indy_rtc_set_time;
 
 	board_time_init = indy_time_init;
-	board_timer_setup = indy_timer_setup;
 }
diff -urN linux-2.6.18-rc1/arch/mips/sgi-ip27/ip27-irq.c linux-2.6.18-rc2/arch/mips/sgi-ip27/ip27-irq.c
--- linux-2.6.18-rc1/arch/mips/sgi-ip27/ip27-irq.c	2006-07-15 22:34:41.684900611 +0000
+++ linux-2.6.18-rc2/arch/mips/sgi-ip27/ip27-irq.c	2006-07-15 22:34:46.869463386 +0000
@@ -296,7 +296,6 @@
 	struct bridge_controller *bc = IRQ_TO_BRIDGE(irq);
 	struct hub_data *hub = hub_data(cpu_to_node(bc->irq_cpu));
 	bridge_t *bridge = bc->base;
-	struct slice_data *si = cpu_data[bc->irq_cpu].data;
 	int pin, swlevel;
 	cpuid_t cpu;
 
@@ -311,7 +310,6 @@
 	intr_disconnect_level(cpu, swlevel);
 
 	__clear_bit(swlevel, hub->irq_alloc_mask);
-	si->level_to_irq[swlevel] = -1;
 
 	bridge->b_int_enable &= ~(1 << pin);
 	bridge->b_wid_tflush;
@@ -347,7 +345,7 @@
 		enable_bridge_irq(irq);
 }
 
-static struct hw_interrupt_type bridge_irq_type = {
+static struct irq_chip bridge_irq_type = {
 	.typename	= "bridge",
 	.startup	= startup_bridge_irq,
 	.shutdown	= shutdown_bridge_irq,
diff -urN linux-2.6.18-rc1/arch/mips/sgi-ip27/ip27-timer.c linux-2.6.18-rc2/arch/mips/sgi-ip27/ip27-timer.c
--- linux-2.6.18-rc1/arch/mips/sgi-ip27/ip27-timer.c	2006-07-15 22:34:41.684900611 +0000
+++ linux-2.6.18-rc2/arch/mips/sgi-ip27/ip27-timer.c	2006-07-15 22:34:46.869463386 +0000
@@ -1,5 +1,5 @@
 /*
- * Copytight (C) 1999, 2000, 05 Ralf Baechle (ralf@linux-mips.org)
+ * Copytight (C) 1999, 2000, 05, 06 Ralf Baechle (ralf@linux-mips.org)
  * Copytight (C) 1999, 2000 Silicon Graphics, Inc.
  */
 #include <linux/bcd.h>
@@ -181,8 +181,9 @@
         return mktime(year, month, date, hour, min, sec);
 }
 
-static void startup_rt_irq(unsigned int irq)
+static unsigned int startup_rt_irq(unsigned int irq)
 {
+	return 0;
 }
 
 static void shutdown_rt_irq(unsigned int irq)
@@ -205,7 +206,7 @@
 {
 }
 
-static struct hw_interrupt_type rt_irq_type = {
+static struct irq_chip rt_irq_type = {
 	.typename	= "SN HUB RT timer",
 	.startup	= startup_rt_irq,
 	.shutdown	= shutdown_rt_irq,
@@ -224,17 +225,17 @@
 
 extern int allocate_irqno(void);
 
-static void ip27_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
 	int irqno  = allocate_irqno();
 
 	if (irqno < 0)
 		panic("Can't allocate interrupt number for timer interrupt");
 
-	irq_desc[irqno].status = IRQ_DISABLED;
-	irq_desc[irqno].action = NULL;
-	irq_desc[irqno].depth = 1;
-	irq_desc[irqno].handler = &rt_irq_type;
+	irq_desc[irqno].status	= IRQ_DISABLED;
+	irq_desc[irqno].action	= NULL;
+	irq_desc[irqno].depth	= 1;
+	irq_desc[irqno].chip	= &rt_irq_type;
 
 	/* over-write the handler, we use our own way */
 	irq->handler = no_action;
@@ -243,6 +244,10 @@
 	irq_desc[irqno].status |= IRQ_PER_CPU;
 
 	rt_timer_irq = irqno;
+	/*
+	 * Only needed to get /proc/interrupt to display timer irq stats
+	 */
+	setup_irq(irqno, &rt_irqaction);
 }
 
 void __init ip27_time_init(void)
@@ -251,8 +256,6 @@
 	xtime.tv_nsec = 0;
 
 	do_gettimeoffset = ip27_do_gettimeoffset;
-
-	board_timer_setup = ip27_timer_setup;
 }
 
 void __init cpu_time_init(void)
diff -urN linux-2.6.18-rc1/arch/mips/sgi-ip32/ip32-irq.c linux-2.6.18-rc2/arch/mips/sgi-ip32/ip32-irq.c
--- linux-2.6.18-rc1/arch/mips/sgi-ip32/ip32-irq.c	2006-07-15 22:34:41.684900611 +0000
+++ linux-2.6.18-rc2/arch/mips/sgi-ip32/ip32-irq.c	2006-07-15 22:34:46.873463820 +0000
@@ -160,7 +160,7 @@
 #define shutdown_cpu_irq disable_cpu_irq
 #define mask_and_ack_cpu_irq disable_cpu_irq
 
-static struct hw_interrupt_type ip32_cpu_interrupt = {
+static struct irq_chip ip32_cpu_interrupt = {
 	.typename = "IP32 CPU",
 	.startup = startup_cpu_irq,
 	.shutdown = shutdown_cpu_irq,
@@ -230,7 +230,7 @@
 
 #define shutdown_crime_irq disable_crime_irq
 
-static struct hw_interrupt_type ip32_crime_interrupt = {
+static struct irq_chip ip32_crime_interrupt = {
 	.typename = "IP32 CRIME",
 	.startup = startup_crime_irq,
 	.shutdown = shutdown_crime_irq,
@@ -289,7 +289,7 @@
 #define shutdown_macepci_irq disable_macepci_irq
 #define mask_and_ack_macepci_irq disable_macepci_irq
 
-static struct hw_interrupt_type ip32_macepci_interrupt = {
+static struct irq_chip ip32_macepci_interrupt = {
 	.typename = "IP32 MACE PCI",
 	.startup = startup_macepci_irq,
 	.shutdown = shutdown_macepci_irq,
@@ -316,9 +316,9 @@
 				 MACEISA_KEYB_POLL_INT |	\
 				 MACEISA_MOUSE_INT |		\
 				 MACEISA_MOUSE_POLL_INT |	\
-				 MACEIIRQF_TIMER0_INT |		\
-				 MACEIIRQF_TIMER1_INT |		\
-				 MACEIIRQF_TIMER2_INT)
+				 MACEISA_TIMER0_INT |		\
+				 MACEISA_TIMER1_INT |		\
+				 MACEISA_TIMER2_INT)
 #define MACEISA_SUPERIO_INT	(MACEISA_PARALLEL_INT |		\
 				 MACEISA_PAR_CTXA_INT |		\
 				 MACEISA_PAR_CTXB_INT |		\
@@ -349,7 +349,7 @@
 	case MACEISA_AUDIO_SW_IRQ ... MACEISA_AUDIO3_MERR_IRQ:
 		crime_int = MACE_AUDIO_INT;
 		break;
-	case MACEISA_RTC_IRQ ... MACEIIRQF_TIMER2_IRQ:
+	case MACEISA_RTC_IRQ ... MACEISA_TIMER2_IRQ:
 		crime_int = MACE_MISC_INT;
 		break;
 	case MACEISA_PARALLEL_IRQ ... MACEISA_SERIAL2_RDMAOR_IRQ:
@@ -419,7 +419,7 @@
 
 #define shutdown_maceisa_irq disable_maceisa_irq
 
-static struct hw_interrupt_type ip32_maceisa_interrupt = {
+static struct irq_chip ip32_maceisa_interrupt = {
 	.typename = "IP32 MACE ISA",
 	.startup = startup_maceisa_irq,
 	.shutdown = shutdown_maceisa_irq,
@@ -469,7 +469,7 @@
 #define shutdown_mace_irq disable_mace_irq
 #define mask_and_ack_mace_irq disable_mace_irq
 
-static struct hw_interrupt_type ip32_mace_interrupt = {
+static struct irq_chip ip32_mace_interrupt = {
 	.typename = "IP32 MACE",
 	.startup = startup_mace_irq,
 	.shutdown = shutdown_mace_irq,
@@ -575,7 +575,7 @@
 	mace->perif.ctrl.imask = 0;
 
 	for (irq = 0; irq <= IP32_IRQ_MAX; irq++) {
-		hw_irq_controller *controller;
+		struct irq_chip *controller;
 
 		if (irq == IP32_R4K_TIMER_IRQ)
 			controller = &ip32_cpu_interrupt;
diff -urN linux-2.6.18-rc1/arch/mips/sgi-ip32/ip32-setup.c linux-2.6.18-rc2/arch/mips/sgi-ip32/ip32-setup.c
--- linux-2.6.18-rc1/arch/mips/sgi-ip32/ip32-setup.c	2006-07-15 22:34:41.684900611 +0000
+++ linux-2.6.18-rc2/arch/mips/sgi-ip32/ip32-setup.c	2006-07-15 22:34:46.873463820 +0000
@@ -7,6 +7,7 @@
  *
  * Copyright (C) 2000 Harald Koerfgen
  * Copyright (C) 2002, 2003, 2005 Ilya A. Volynets
+ * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
  */
 #include <linux/console.h>
 #include <linux/init.h>
@@ -80,7 +81,7 @@
 	printk("%d MHz CPU detected\n", mips_hpt_frequency * 2 / 1000000);
 }
 
-void __init ip32_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
 	irq->handler = no_action;
 	setup_irq(IP32_R4K_TIMER_IRQ, irq);
@@ -94,7 +95,6 @@
 	rtc_mips_set_mmss = mc146818_set_rtc_mmss;
 
 	board_time_init = ip32_time_init;
-	board_timer_setup = ip32_timer_setup;
 
 #ifdef CONFIG_SERIAL_8250
 	{
diff -urN linux-2.6.18-rc1/arch/mips/sibyte/bcm1480/irq.c linux-2.6.18-rc2/arch/mips/sibyte/bcm1480/irq.c
--- linux-2.6.18-rc1/arch/mips/sibyte/bcm1480/irq.c	2006-07-15 22:34:41.688901045 +0000
+++ linux-2.6.18-rc2/arch/mips/sibyte/bcm1480/irq.c	2006-07-15 22:34:46.873463820 +0000
@@ -83,7 +83,7 @@
 #endif
 #endif
 
-static struct hw_interrupt_type bcm1480_irq_type = {
+static struct irq_chip bcm1480_irq_type = {
 	.typename = "BCM1480-IMR",
 	.startup = startup_bcm1480_irq,
 	.shutdown = shutdown_bcm1480_irq,
@@ -140,7 +140,7 @@
 {
 	int i = 0, old_cpu, cpu, int_on, k;
 	u64 cur_ints;
-	irq_desc_t *desc = irq_desc + irq;
+	struct irq_desc *desc = irq_desc + irq;
 	unsigned long flags;
 	unsigned int irq_dirty;
 
@@ -278,7 +278,7 @@
 			irq_desc[i].chip = &bcm1480_irq_type;
 			bcm1480_irq_owner[i] = 0;
 		} else {
-			irq_desc[i].chip = &no_irq_type;
+			irq_desc[i].chip = &no_irq_chip;
 		}
 	}
 }
@@ -301,7 +301,7 @@
 
 int bcm1480_steal_irq(int irq)
 {
-	irq_desc_t *desc = irq_desc + irq;
+	struct irq_desc *desc = irq_desc + irq;
 	unsigned long flags;
 	int retval = 0;
 
@@ -502,22 +502,23 @@
 #ifdef CONFIG_SIBYTE_BCM1480_PROF
 	if (pending & CAUSEF_IP7)	/* Cpu performance counter interrupt */
 		sbprof_cpu_intr(exception_epc(regs));
+	else
 #endif
 
 	if (pending & CAUSEF_IP4)
 		bcm1480_timer_interrupt(regs);
 
 #ifdef CONFIG_SMP
-	if (pending & CAUSEF_IP3)
+	else if (pending & CAUSEF_IP3)
 		bcm1480_mailbox_interrupt(regs);
 #endif
 
 #ifdef CONFIG_KGDB
-	if (pending & CAUSEF_IP6)
+	else if (pending & CAUSEF_IP6)
 		bcm1480_kgdb_interrupt(regs);		/* KGDB (uart 1) */
 #endif
 
-	if (pending & CAUSEF_IP2) {
+	else if (pending & CAUSEF_IP2) {
 		unsigned long long mask_h, mask_l;
 		unsigned long base;
 
@@ -533,7 +534,7 @@
 		mask_l = __raw_readq(
 			IOADDR(base + R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L));
 
-		if (!mask_h) {
+		if (mask_h) {
 			if (mask_h ^ 1)
 				do_IRQ(63 - dclz(mask_h), regs);
 			else
diff -urN linux-2.6.18-rc1/arch/mips/sibyte/sb1250/irq.c linux-2.6.18-rc2/arch/mips/sibyte/sb1250/irq.c
--- linux-2.6.18-rc1/arch/mips/sibyte/sb1250/irq.c	2006-07-15 22:34:41.688901045 +0000
+++ linux-2.6.18-rc2/arch/mips/sibyte/sb1250/irq.c	2006-07-15 22:34:46.873463820 +0000
@@ -69,7 +69,7 @@
 #endif
 #endif
 
-static struct hw_interrupt_type sb1250_irq_type = {
+static struct irq_chip sb1250_irq_type = {
 	.typename = "SB1250-IMR",
 	.startup = startup_sb1250_irq,
 	.shutdown = shutdown_sb1250_irq,
@@ -120,7 +120,7 @@
 {
 	int i = 0, old_cpu, cpu, int_on;
 	u64 cur_ints;
-	irq_desc_t *desc = irq_desc + irq;
+	struct irq_desc *desc = irq_desc + irq;
 	unsigned long flags;
 
 	i = first_cpu(mask);
@@ -248,7 +248,7 @@
 			irq_desc[i].chip = &sb1250_irq_type;
 			sb1250_irq_owner[i] = 0;
 		} else {
-			irq_desc[i].chip = &no_irq_type;
+			irq_desc[i].chip = &no_irq_chip;
 		}
 	}
 }
@@ -271,7 +271,7 @@
 
 int sb1250_steal_irq(int irq)
 {
-	irq_desc_t *desc = irq_desc + irq;
+	struct irq_desc *desc = irq_desc + irq;
 	unsigned long flags;
 	int retval = 0;
 
@@ -460,25 +460,25 @@
 	pending = read_c0_cause();
 
 #ifdef CONFIG_SIBYTE_SB1250_PROF
-	if (pending & CAUSEF_IP7) { /* Cpu performance counter interrupt */
+	if (pending & CAUSEF_IP7) /* Cpu performance counter interrupt */
 		sbprof_cpu_intr(exception_epc(regs));
-	}
+	else
 #endif
 
 	if (pending & CAUSEF_IP4)
 		sb1250_timer_interrupt(regs);
 
 #ifdef CONFIG_SMP
-	if (pending & CAUSEF_IP3)
+	else if (pending & CAUSEF_IP3)
 		sb1250_mailbox_interrupt(regs);
 #endif
 
 #ifdef CONFIG_KGDB
-	if (pending & CAUSEF_IP6)			/* KGDB (uart 1) */
+	else if (pending & CAUSEF_IP6)			/* KGDB (uart 1) */
 		sb1250_kgdb_interrupt(regs);
 #endif
 
-	if (pending & CAUSEF_IP2) {
+	else if (pending & CAUSEF_IP2) {
 		unsigned long long mask;
 
 		/*
diff -urN linux-2.6.18-rc1/arch/mips/sibyte/swarm/setup.c linux-2.6.18-rc2/arch/mips/sibyte/swarm/setup.c
--- linux-2.6.18-rc1/arch/mips/sibyte/swarm/setup.c	2006-07-15 22:34:41.688901045 +0000
+++ linux-2.6.18-rc2/arch/mips/sibyte/swarm/setup.c	2006-07-15 22:34:46.873463820 +0000
@@ -27,7 +27,7 @@
 #include <linux/blkdev.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/initrd.h>
 
 #include <asm/irq.h>
@@ -77,7 +77,7 @@
 #endif
 }
 
-void __init swarm_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
         /*
          * we don't set up irqaction, because we will deliver timer
@@ -117,7 +117,6 @@
 	panic_timeout = 5;  /* For debug.  */
 
 	board_time_init = swarm_time_init;
-	board_timer_setup = swarm_timer_setup;
 	board_be_handler = swarm_be_handler;
 
 	if (xicor_probe()) {
diff -urN linux-2.6.18-rc1/arch/mips/sni/irq.c linux-2.6.18-rc2/arch/mips/sni/irq.c
--- linux-2.6.18-rc1/arch/mips/sni/irq.c	2006-07-15 22:34:41.688901045 +0000
+++ linux-2.6.18-rc2/arch/mips/sni/irq.c	2006-07-15 22:34:46.873463820 +0000
@@ -55,7 +55,7 @@
 		enable_pciasic_irq(irq);
 }
 
-static struct hw_interrupt_type pciasic_irq_type = {
+static struct irq_chip pciasic_irq_type = {
 	.typename = "ASIC-PCI",
 	.startup = startup_pciasic_irq,
 	.shutdown = shutdown_pciasic_irq,
diff -urN linux-2.6.18-rc1/arch/mips/sni/setup.c linux-2.6.18-rc2/arch/mips/sni/setup.c
--- linux-2.6.18-rc1/arch/mips/sni/setup.c	2006-07-15 22:34:41.688901045 +0000
+++ linux-2.6.18-rc2/arch/mips/sni/setup.c	2006-07-15 22:34:46.873463820 +0000
@@ -18,7 +18,7 @@
 #include <linux/pci.h>
 #include <linux/console.h>
 #include <linux/fb.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 
 #ifdef CONFIG_ARC
 #include <asm/arc/types.h>
@@ -41,7 +41,7 @@
 extern void sni_machine_halt(void);
 extern void sni_machine_power_off(void);
 
-static void __init sni_rm200_pci_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
 	/* set the clock to 100 Hz */
 	outb_p(0x34,0x43);		/* binary, mode 2, LSB/MSB, ch 0 */
@@ -270,7 +270,6 @@
 #endif
 
 	sni_resource_init();
-	board_timer_setup = sni_rm200_pci_timer_setup;
 
 	_machine_restart = sni_machine_restart;
 	_machine_halt = sni_machine_halt;
diff -urN linux-2.6.18-rc1/arch/mips/tx4927/common/tx4927_irq.c linux-2.6.18-rc2/arch/mips/tx4927/common/tx4927_irq.c
--- linux-2.6.18-rc1/arch/mips/tx4927/common/tx4927_irq.c	2006-07-15 22:34:41.688901045 +0000
+++ linux-2.6.18-rc2/arch/mips/tx4927/common/tx4927_irq.c	2006-07-15 22:34:46.873463820 +0000
@@ -146,7 +146,7 @@
 static DEFINE_SPINLOCK(tx4927_pic_lock);
 
 #define TX4927_CP0_NAME "TX4927-CP0"
-static struct hw_interrupt_type tx4927_irq_cp0_type = {
+static struct irq_chip tx4927_irq_cp0_type = {
 	.typename	= TX4927_CP0_NAME,
 	.startup	= tx4927_irq_cp0_startup,
 	.shutdown	= tx4927_irq_cp0_shutdown,
@@ -158,7 +158,7 @@
 };
 
 #define TX4927_PIC_NAME "TX4927-PIC"
-static struct hw_interrupt_type tx4927_irq_pic_type = {
+static struct irq_chip tx4927_irq_pic_type = {
 	.typename	= TX4927_PIC_NAME,
 	.startup	= tx4927_irq_pic_startup,
 	.shutdown	= tx4927_irq_pic_shutdown,
diff -urN linux-2.6.18-rc1/arch/mips/tx4927/common/tx4927_setup.c linux-2.6.18-rc2/arch/mips/tx4927/common/tx4927_setup.c
--- linux-2.6.18-rc1/arch/mips/tx4927/common/tx4927_setup.c	2006-07-15 22:34:41.688901045 +0000
+++ linux-2.6.18-rc2/arch/mips/tx4927/common/tx4927_setup.c	2006-07-15 22:34:46.877464255 +0000
@@ -50,7 +50,6 @@
 #undef DEBUG
 
 void __init tx4927_time_init(void);
-void __init tx4927_timer_setup(struct irqaction *irq);
 void dump_cp0(char *key);
 
 
@@ -66,7 +65,6 @@
 void __init plat_mem_setup(void)
 {
 	board_time_init = tx4927_time_init;
-	board_timer_setup = tx4927_timer_setup;
 	__wbflush = tx4927_write_buffer_flush;
 
 #ifdef CONFIG_TOSHIBA_RBTX4927
@@ -91,7 +89,7 @@
 }
 
 
-void __init tx4927_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
 	u32 count;
 	u32 c1;
diff -urN linux-2.6.18-rc1/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c linux-2.6.18-rc2/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
--- linux-2.6.18-rc1/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c	2006-07-15 22:34:41.688901045 +0000
+++ linux-2.6.18-rc2/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c	2006-07-15 22:34:46.877464255 +0000
@@ -251,7 +251,7 @@
 
 
 #define TOSHIBA_RBTX4927_IOC_NAME "RBTX4927-IOC"
-static struct hw_interrupt_type toshiba_rbtx4927_irq_ioc_type = {
+static struct irq_chip toshiba_rbtx4927_irq_ioc_type = {
 	.typename = TOSHIBA_RBTX4927_IOC_NAME,
 	.startup = toshiba_rbtx4927_irq_ioc_startup,
 	.shutdown = toshiba_rbtx4927_irq_ioc_shutdown,
@@ -267,7 +267,7 @@
 
 #ifdef CONFIG_TOSHIBA_FPCIB0
 #define TOSHIBA_RBTX4927_ISA_NAME "RBTX4927-ISA"
-static struct hw_interrupt_type toshiba_rbtx4927_irq_isa_type = {
+static struct irq_chip toshiba_rbtx4927_irq_isa_type = {
 	.typename = TOSHIBA_RBTX4927_ISA_NAME,
 	.startup = toshiba_rbtx4927_irq_isa_startup,
 	.shutdown = toshiba_rbtx4927_irq_isa_shutdown,
diff -urN linux-2.6.18-rc1/arch/mips/tx4938/common/irq.c linux-2.6.18-rc2/arch/mips/tx4938/common/irq.c
--- linux-2.6.18-rc1/arch/mips/tx4938/common/irq.c	2006-07-15 22:34:41.692901479 +0000
+++ linux-2.6.18-rc2/arch/mips/tx4938/common/irq.c	2006-07-15 22:34:46.877464255 +0000
@@ -57,7 +57,7 @@
 DEFINE_SPINLOCK(tx4938_pic_lock);
 
 #define TX4938_CP0_NAME "TX4938-CP0"
-static struct hw_interrupt_type tx4938_irq_cp0_type = {
+static struct irq_chip tx4938_irq_cp0_type = {
 	.typename = TX4938_CP0_NAME,
 	.startup = tx4938_irq_cp0_startup,
 	.shutdown = tx4938_irq_cp0_shutdown,
@@ -69,7 +69,7 @@
 };
 
 #define TX4938_PIC_NAME "TX4938-PIC"
-static struct hw_interrupt_type tx4938_irq_pic_type = {
+static struct irq_chip tx4938_irq_pic_type = {
 	.typename = TX4938_PIC_NAME,
 	.startup = tx4938_irq_pic_startup,
 	.shutdown = tx4938_irq_pic_shutdown,
diff -urN linux-2.6.18-rc1/arch/mips/tx4938/common/setup.c linux-2.6.18-rc2/arch/mips/tx4938/common/setup.c
--- linux-2.6.18-rc1/arch/mips/tx4938/common/setup.c	2006-07-15 22:34:41.692901479 +0000
+++ linux-2.6.18-rc2/arch/mips/tx4938/common/setup.c	2006-07-15 22:34:46.877464255 +0000
@@ -39,7 +39,6 @@
 
 void __init tx4938_setup(void);
 void __init tx4938_time_init(void);
-void __init tx4938_timer_setup(struct irqaction *irq);
 void dump_cp0(char *key);
 
 void (*__wbflush) (void);
@@ -64,7 +63,6 @@
 plat_mem_setup(void)
 {
 	board_time_init = tx4938_time_init;
-	board_timer_setup = tx4938_timer_setup;
 	__wbflush = tx4938_write_buffer_flush;
 	toshiba_rbtx4938_setup();
 }
@@ -75,8 +73,7 @@
 	rbtx4938_time_init();
 }
 
-void __init
-tx4938_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
 	u32 count;
 	u32 c1;
diff -urN linux-2.6.18-rc1/arch/mips/tx4938/toshiba_rbtx4938/irq.c linux-2.6.18-rc2/arch/mips/tx4938/toshiba_rbtx4938/irq.c
--- linux-2.6.18-rc1/arch/mips/tx4938/toshiba_rbtx4938/irq.c	2006-07-15 22:34:41.692901479 +0000
+++ linux-2.6.18-rc2/arch/mips/tx4938/toshiba_rbtx4938/irq.c	2006-07-15 22:34:46.877464255 +0000
@@ -97,7 +97,7 @@
 DEFINE_SPINLOCK(toshiba_rbtx4938_ioc_lock);
 
 #define TOSHIBA_RBTX4938_IOC_NAME "RBTX4938-IOC"
-static struct hw_interrupt_type toshiba_rbtx4938_irq_ioc_type = {
+static struct irq_chip toshiba_rbtx4938_irq_ioc_type = {
 	.typename = TOSHIBA_RBTX4938_IOC_NAME,
 	.startup = toshiba_rbtx4938_irq_ioc_startup,
 	.shutdown = toshiba_rbtx4938_irq_ioc_shutdown,
diff -urN linux-2.6.18-rc1/arch/mips/vr41xx/Kconfig linux-2.6.18-rc2/arch/mips/vr41xx/Kconfig
--- linux-2.6.18-rc1/arch/mips/vr41xx/Kconfig	2006-07-15 22:34:41.692901479 +0000
+++ linux-2.6.18-rc2/arch/mips/vr41xx/Kconfig	2006-07-15 22:34:46.877464255 +0000
@@ -86,9 +86,3 @@
 	depends on MACH_VR41XX && HW_HAS_PCI
 	default y
 	select PCI
-
-config VRC4173
-	tristate "Add NEC VRC4173 companion chip support"
-	depends on MACH_VR41XX && PCI_VR41XX
-	help
-	  The NEC VRC4173 is a companion chip for NEC VR4122/VR4131.
diff -urN linux-2.6.18-rc1/arch/mips/vr41xx/casio-e55/setup.c linux-2.6.18-rc2/arch/mips/vr41xx/casio-e55/setup.c
--- linux-2.6.18-rc1/arch/mips/vr41xx/casio-e55/setup.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/mips/vr41xx/casio-e55/setup.c	2006-07-15 22:34:46.877464255 +0000
@@ -1,7 +1,7 @@
 /*
  *  setup.c, Setup for the CASIO CASSIOPEIA E-11/15/55/65.
  *
- *  Copyright (C) 2002-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -21,13 +21,18 @@
 #include <linux/ioport.h>
 
 #include <asm/io.h>
-#include <asm/vr41xx/e55.h>
+
+#define E55_ISA_IO_BASE		0x1400c000
+#define E55_ISA_IO_SIZE		0x03ff4000
+#define E55_ISA_IO_START	0
+#define E55_ISA_IO_END		(E55_ISA_IO_SIZE - 1)
+#define E55_IO_PORT_BASE	KSEG1ADDR(E55_ISA_IO_BASE)
 
 static int __init casio_e55_setup(void)
 {
-	set_io_port_base(IO_PORT_BASE);
-	ioport_resource.start = IO_PORT_RESOURCE_START;
-	ioport_resource.end = IO_PORT_RESOURCE_END;
+	set_io_port_base(E55_IO_PORT_BASE);
+	ioport_resource.start = E55_ISA_IO_START;
+	ioport_resource.end = E55_ISA_IO_END;
 
 	return 0;
 }
diff -urN linux-2.6.18-rc1/arch/mips/vr41xx/common/Makefile linux-2.6.18-rc2/arch/mips/vr41xx/common/Makefile
--- linux-2.6.18-rc1/arch/mips/vr41xx/common/Makefile	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/mips/vr41xx/common/Makefile	2006-07-15 22:34:46.877464255 +0000
@@ -2,7 +2,6 @@
 # Makefile for common code of the NEC VR4100 series.
 #
 
-obj-y				+= bcu.o cmu.o icu.o init.o irq.o pmu.o type.o
-obj-$(CONFIG_VRC4173)		+= vrc4173.o
+obj-y	+= bcu.o cmu.o icu.o init.o irq.o pmu.o type.o
 
 EXTRA_AFLAGS := $(CFLAGS)
diff -urN linux-2.6.18-rc1/arch/mips/vr41xx/common/icu.c linux-2.6.18-rc2/arch/mips/vr41xx/common/icu.c
--- linux-2.6.18-rc1/arch/mips/vr41xx/common/icu.c	2006-07-15 22:34:41.692901479 +0000
+++ linux-2.6.18-rc2/arch/mips/vr41xx/common/icu.c	2006-07-15 22:34:46.877464255 +0000
@@ -38,6 +38,7 @@
 
 #include <asm/cpu.h>
 #include <asm/io.h>
+#include <asm/vr41xx/irq.h>
 #include <asm/vr41xx/vr41xx.h>
 
 static void __iomem *icu1_base;
@@ -152,7 +153,7 @@
 
 void vr41xx_enable_piuint(uint16_t mask)
 {
-	irq_desc_t *desc = irq_desc + PIU_IRQ;
+	struct irq_desc *desc = irq_desc + PIU_IRQ;
 	unsigned long flags;
 
 	if (current_cpu_data.cputype == CPU_VR4111 ||
@@ -167,7 +168,7 @@
 
 void vr41xx_disable_piuint(uint16_t mask)
 {
-	irq_desc_t *desc = irq_desc + PIU_IRQ;
+	struct irq_desc *desc = irq_desc + PIU_IRQ;
 	unsigned long flags;
 
 	if (current_cpu_data.cputype == CPU_VR4111 ||
@@ -182,7 +183,7 @@
 
 void vr41xx_enable_aiuint(uint16_t mask)
 {
-	irq_desc_t *desc = irq_desc + AIU_IRQ;
+	struct irq_desc *desc = irq_desc + AIU_IRQ;
 	unsigned long flags;
 
 	if (current_cpu_data.cputype == CPU_VR4111 ||
@@ -197,7 +198,7 @@
 
 void vr41xx_disable_aiuint(uint16_t mask)
 {
-	irq_desc_t *desc = irq_desc + AIU_IRQ;
+	struct irq_desc *desc = irq_desc + AIU_IRQ;
 	unsigned long flags;
 
 	if (current_cpu_data.cputype == CPU_VR4111 ||
@@ -212,7 +213,7 @@
 
 void vr41xx_enable_kiuint(uint16_t mask)
 {
-	irq_desc_t *desc = irq_desc + KIU_IRQ;
+	struct irq_desc *desc = irq_desc + KIU_IRQ;
 	unsigned long flags;
 
 	if (current_cpu_data.cputype == CPU_VR4111 ||
@@ -227,7 +228,7 @@
 
 void vr41xx_disable_kiuint(uint16_t mask)
 {
-	irq_desc_t *desc = irq_desc + KIU_IRQ;
+	struct irq_desc *desc = irq_desc + KIU_IRQ;
 	unsigned long flags;
 
 	if (current_cpu_data.cputype == CPU_VR4111 ||
@@ -242,7 +243,7 @@
 
 void vr41xx_enable_dsiuint(uint16_t mask)
 {
-	irq_desc_t *desc = irq_desc + DSIU_IRQ;
+	struct irq_desc *desc = irq_desc + DSIU_IRQ;
 	unsigned long flags;
 
 	spin_lock_irqsave(&desc->lock, flags);
@@ -254,7 +255,7 @@
 
 void vr41xx_disable_dsiuint(uint16_t mask)
 {
-	irq_desc_t *desc = irq_desc + DSIU_IRQ;
+	struct irq_desc *desc = irq_desc + DSIU_IRQ;
 	unsigned long flags;
 
 	spin_lock_irqsave(&desc->lock, flags);
@@ -266,7 +267,7 @@
 
 void vr41xx_enable_firint(uint16_t mask)
 {
-	irq_desc_t *desc = irq_desc + FIR_IRQ;
+	struct irq_desc *desc = irq_desc + FIR_IRQ;
 	unsigned long flags;
 
 	spin_lock_irqsave(&desc->lock, flags);
@@ -278,7 +279,7 @@
 
 void vr41xx_disable_firint(uint16_t mask)
 {
-	irq_desc_t *desc = irq_desc + FIR_IRQ;
+	struct irq_desc *desc = irq_desc + FIR_IRQ;
 	unsigned long flags;
 
 	spin_lock_irqsave(&desc->lock, flags);
@@ -290,7 +291,7 @@
 
 void vr41xx_enable_pciint(void)
 {
-	irq_desc_t *desc = irq_desc + PCI_IRQ;
+	struct irq_desc *desc = irq_desc + PCI_IRQ;
 	unsigned long flags;
 
 	if (current_cpu_data.cputype == CPU_VR4122 ||
@@ -306,7 +307,7 @@
 
 void vr41xx_disable_pciint(void)
 {
-	irq_desc_t *desc = irq_desc + PCI_IRQ;
+	struct irq_desc *desc = irq_desc + PCI_IRQ;
 	unsigned long flags;
 
 	if (current_cpu_data.cputype == CPU_VR4122 ||
@@ -322,7 +323,7 @@
 
 void vr41xx_enable_scuint(void)
 {
-	irq_desc_t *desc = irq_desc + SCU_IRQ;
+	struct irq_desc *desc = irq_desc + SCU_IRQ;
 	unsigned long flags;
 
 	if (current_cpu_data.cputype == CPU_VR4122 ||
@@ -338,7 +339,7 @@
 
 void vr41xx_disable_scuint(void)
 {
-	irq_desc_t *desc = irq_desc + SCU_IRQ;
+	struct irq_desc *desc = irq_desc + SCU_IRQ;
 	unsigned long flags;
 
 	if (current_cpu_data.cputype == CPU_VR4122 ||
@@ -354,7 +355,7 @@
 
 void vr41xx_enable_csiint(uint16_t mask)
 {
-	irq_desc_t *desc = irq_desc + CSI_IRQ;
+	struct irq_desc *desc = irq_desc + CSI_IRQ;
 	unsigned long flags;
 
 	if (current_cpu_data.cputype == CPU_VR4122 ||
@@ -370,7 +371,7 @@
 
 void vr41xx_disable_csiint(uint16_t mask)
 {
-	irq_desc_t *desc = irq_desc + CSI_IRQ;
+	struct irq_desc *desc = irq_desc + CSI_IRQ;
 	unsigned long flags;
 
 	if (current_cpu_data.cputype == CPU_VR4122 ||
@@ -386,7 +387,7 @@
 
 void vr41xx_enable_bcuint(void)
 {
-	irq_desc_t *desc = irq_desc + BCU_IRQ;
+	struct irq_desc *desc = irq_desc + BCU_IRQ;
 	unsigned long flags;
 
 	if (current_cpu_data.cputype == CPU_VR4122 ||
@@ -402,7 +403,7 @@
 
 void vr41xx_disable_bcuint(void)
 {
-	irq_desc_t *desc = irq_desc + BCU_IRQ;
+	struct irq_desc *desc = irq_desc + BCU_IRQ;
 	unsigned long flags;
 
 	if (current_cpu_data.cputype == CPU_VR4122 ||
@@ -442,7 +443,7 @@
 		icu1_set(MSYSINT1REG, 1 << SYSINT1_IRQ_TO_PIN(irq));
 }
 
-static struct hw_interrupt_type sysint1_irq_type = {
+static struct irq_chip sysint1_irq_type = {
 	.typename	= "SYSINT1",
 	.startup	= startup_sysint1_irq,
 	.shutdown	= shutdown_sysint1_irq,
@@ -478,7 +479,7 @@
 		icu2_set(MSYSINT2REG, 1 << SYSINT2_IRQ_TO_PIN(irq));
 }
 
-static struct hw_interrupt_type sysint2_irq_type = {
+static struct irq_chip sysint2_irq_type = {
 	.typename	= "SYSINT2",
 	.startup	= startup_sysint2_irq,
 	.shutdown	= shutdown_sysint2_irq,
@@ -490,7 +491,7 @@
 
 static inline int set_sysint1_assign(unsigned int irq, unsigned char assign)
 {
-	irq_desc_t *desc = irq_desc + irq;
+	struct irq_desc *desc = irq_desc + irq;
 	uint16_t intassign0, intassign1;
 	unsigned int pin;
 
@@ -549,7 +550,7 @@
 
 static inline int set_sysint2_assign(unsigned int irq, unsigned char assign)
 {
-	irq_desc_t *desc = irq_desc + irq;
+	struct irq_desc *desc = irq_desc + irq;
 	uint16_t intassign2, intassign3;
 	unsigned int pin;
 
diff -urN linux-2.6.18-rc1/arch/mips/vr41xx/common/init.c linux-2.6.18-rc2/arch/mips/vr41xx/common/init.c
--- linux-2.6.18-rc1/arch/mips/vr41xx/common/init.c	2006-07-15 22:34:41.692901479 +0000
+++ linux-2.6.18-rc2/arch/mips/vr41xx/common/init.c	2006-07-15 22:34:46.877464255 +0000
@@ -24,6 +24,7 @@
 
 #include <asm/bootinfo.h>
 #include <asm/time.h>
+#include <asm/vr41xx/irq.h>
 #include <asm/vr41xx/vr41xx.h>
 
 #define IO_MEM_RESOURCE_START	0UL
@@ -47,7 +48,7 @@
 		mips_hpt_frequency = tclock / 4;
 }
 
-static void __init setup_timer_irq(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
 	setup_irq(TIMER_IRQ, irq);
 }
@@ -55,7 +56,6 @@
 static void __init timer_init(void)
 {
 	board_time_init = setup_timer_frequency;
-	board_timer_setup = setup_timer_irq;
 }
 
 void __init plat_mem_setup(void)
diff -urN linux-2.6.18-rc1/arch/mips/vr41xx/common/irq.c linux-2.6.18-rc2/arch/mips/vr41xx/common/irq.c
--- linux-2.6.18-rc1/arch/mips/vr41xx/common/irq.c	2006-07-15 22:34:41.692901479 +0000
+++ linux-2.6.18-rc2/arch/mips/vr41xx/common/irq.c	2006-07-15 22:34:46.877464255 +0000
@@ -22,7 +22,7 @@
 
 #include <asm/irq_cpu.h>
 #include <asm/system.h>
-#include <asm/vr41xx/vr41xx.h>
+#include <asm/vr41xx/irq.h>
 
 typedef struct irq_cascade {
 	int (*get_irq)(unsigned int, struct pt_regs *);
@@ -62,7 +62,7 @@
 static void irq_dispatch(unsigned int irq, struct pt_regs *regs)
 {
 	irq_cascade_t *cascade;
-	irq_desc_t *desc;
+	struct irq_desc *desc;
 
 	if (irq >= NR_IRQS) {
 		atomic_inc(&irq_err_count);
diff -urN linux-2.6.18-rc1/arch/mips/vr41xx/common/vrc4173.c linux-2.6.18-rc2/arch/mips/vr41xx/common/vrc4173.c
--- linux-2.6.18-rc1/arch/mips/vr41xx/common/vrc4173.c	2006-07-15 22:34:41.692901479 +0000
+++ linux-2.6.18-rc2/arch/mips/vr41xx/common/vrc4173.c	1970-01-01 00:00:00.000000000 +0000
@@ -1,581 +0,0 @@
-/*
- *  vrc4173.c, NEC VRC4173 base driver for NEC VR4122/VR4131.
- *
- *  Copyright (C) 2001-2003  MontaVista Software Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com>
- *  Copyright (C) 2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
- *  Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/spinlock.h>
-#include <linux/types.h>
-
-#include <asm/vr41xx/vr41xx.h>
-#include <asm/vr41xx/vrc4173.h>
-
-MODULE_DESCRIPTION("NEC VRC4173 base driver for NEC VR4122/4131");
-MODULE_AUTHOR("Yoichi Yuasa <yyuasa@mvista.com>");
-MODULE_LICENSE("GPL");
-
-#define VRC4173_CMUCLKMSK	0x040
- #define MSKPIU			0x0001
- #define MSKKIU			0x0002
- #define MSKAIU			0x0004
- #define MSKPS2CH1		0x0008
- #define MSKPS2CH2		0x0010
- #define MSKUSB			0x0020
- #define MSKCARD1		0x0040
- #define MSKCARD2		0x0080
- #define MSKAC97		0x0100
- #define MSK48MUSB		0x0400
- #define MSK48MPIN		0x0800
- #define MSK48MOSC		0x1000
-#define VRC4173_CMUSRST		0x042
- #define USBRST			0x0001
- #define CARD1RST		0x0002
- #define CARD2RST		0x0004
- #define AC97RST		0x0008
-
-#define VRC4173_SYSINT1REG	0x060
-#define VRC4173_MSYSINT1REG	0x06c
-#define VRC4173_MPIUINTREG	0x06e
-#define VRC4173_MAIUINTREG	0x070
-#define VRC4173_MKIUINTREG	0x072
-
-#define VRC4173_SELECTREG	0x09e
- #define SEL3			0x0008
- #define SEL2			0x0004
- #define SEL1			0x0002
- #define SEL0			0x0001
-
-static struct pci_device_id vrc4173_id_table[] __devinitdata = {
-	{	.vendor		= PCI_VENDOR_ID_NEC,
-		.device		= PCI_DEVICE_ID_NEC_VRC4173,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,			},
-	{	.vendor		= 0,				},
-};
-
-unsigned long vrc4173_io_offset = 0;
-
-EXPORT_SYMBOL(vrc4173_io_offset);
-
-static int vrc4173_initialized;
-static uint16_t vrc4173_cmuclkmsk;
-static uint16_t vrc4173_selectreg;
-static DEFINE_SPINLOCK(vrc4173_cmu_lock);
-static DEFINE_SPINLOCK(vrc4173_giu_lock);
-
-static inline void set_cmusrst(uint16_t val)
-{
-	uint16_t cmusrst;
-
-	cmusrst = vrc4173_inw(VRC4173_CMUSRST);
-	cmusrst |= val;
-	vrc4173_outw(cmusrst, VRC4173_CMUSRST);
-}
-
-static inline void clear_cmusrst(uint16_t val)
-{
-	uint16_t cmusrst;
-
-	cmusrst = vrc4173_inw(VRC4173_CMUSRST);
-	cmusrst &= ~val;
-	vrc4173_outw(cmusrst, VRC4173_CMUSRST);
-}
-
-void vrc4173_supply_clock(vrc4173_clock_t clock)
-{
-	if (vrc4173_initialized) {
-		spin_lock_irq(&vrc4173_cmu_lock);
-
-		switch (clock) {
-		case VRC4173_PIU_CLOCK:
-			vrc4173_cmuclkmsk |= MSKPIU;
-			break;
-		case VRC4173_KIU_CLOCK:
-			vrc4173_cmuclkmsk |= MSKKIU;
-			break;
-		case VRC4173_AIU_CLOCK:
-			vrc4173_cmuclkmsk |= MSKAIU;
-			break;
-		case VRC4173_PS2_CH1_CLOCK:
-			vrc4173_cmuclkmsk |= MSKPS2CH1;
-			break;
-		case VRC4173_PS2_CH2_CLOCK:
-			vrc4173_cmuclkmsk |= MSKPS2CH2;
-			break;
-		case VRC4173_USBU_PCI_CLOCK:
-			set_cmusrst(USBRST);
-			vrc4173_cmuclkmsk |= MSKUSB;
-			break;
-		case VRC4173_CARDU1_PCI_CLOCK:
-			set_cmusrst(CARD1RST);
-			vrc4173_cmuclkmsk |= MSKCARD1;
-			break;
-		case VRC4173_CARDU2_PCI_CLOCK:
-			set_cmusrst(CARD2RST);
-			vrc4173_cmuclkmsk |= MSKCARD2;
-			break;
-		case VRC4173_AC97U_PCI_CLOCK:
-			set_cmusrst(AC97RST);
-			vrc4173_cmuclkmsk |= MSKAC97;
-			break;
-		case VRC4173_USBU_48MHz_CLOCK:
-			set_cmusrst(USBRST);
-			vrc4173_cmuclkmsk |= MSK48MUSB;
-			break;
-		case VRC4173_EXT_48MHz_CLOCK:
-			if (vrc4173_cmuclkmsk & MSK48MOSC)
-				vrc4173_cmuclkmsk |= MSK48MPIN;
-			else
-				printk(KERN_WARNING
-				       "vrc4173_supply_clock: "
-				       "Please supply VRC4173_48MHz_CLOCK first "
-				       "rather than VRC4173_EXT_48MHz_CLOCK.\n");
-			break;
-		case VRC4173_48MHz_CLOCK:
-			vrc4173_cmuclkmsk |= MSK48MOSC;
-			break;
-		default:
-			printk(KERN_WARNING
-			       "vrc4173_supply_clock: Invalid CLOCK value %u\n", clock);
-			break;
-		}
-
-		vrc4173_outw(vrc4173_cmuclkmsk, VRC4173_CMUCLKMSK);
-
-		switch (clock) {
-		case VRC4173_USBU_PCI_CLOCK:
-		case VRC4173_USBU_48MHz_CLOCK:
-			clear_cmusrst(USBRST);
-			break;
-		case VRC4173_CARDU1_PCI_CLOCK:
-			clear_cmusrst(CARD1RST);
-			break;
-		case VRC4173_CARDU2_PCI_CLOCK:
-			clear_cmusrst(CARD2RST);
-			break;
-		case VRC4173_AC97U_PCI_CLOCK:
-			clear_cmusrst(AC97RST);
-			break;
-		default:
-			break;
-		}
-
-		spin_unlock_irq(&vrc4173_cmu_lock);
-	}
-}
-
-EXPORT_SYMBOL(vrc4173_supply_clock);
-
-void vrc4173_mask_clock(vrc4173_clock_t clock)
-{
-	if (vrc4173_initialized) {
-		spin_lock_irq(&vrc4173_cmu_lock);
-
-		switch (clock) {
-		case VRC4173_PIU_CLOCK:
-			vrc4173_cmuclkmsk &= ~MSKPIU;
-			break;
-		case VRC4173_KIU_CLOCK:
-			vrc4173_cmuclkmsk &= ~MSKKIU;
-			break;
-		case VRC4173_AIU_CLOCK:
-			vrc4173_cmuclkmsk &= ~MSKAIU;
-			break;
-		case VRC4173_PS2_CH1_CLOCK:
-			vrc4173_cmuclkmsk &= ~MSKPS2CH1;
-			break;
-		case VRC4173_PS2_CH2_CLOCK:
-			vrc4173_cmuclkmsk &= ~MSKPS2CH2;
-			break;
-		case VRC4173_USBU_PCI_CLOCK:
-			set_cmusrst(USBRST);
-			vrc4173_cmuclkmsk &= ~MSKUSB;
-			break;
-		case VRC4173_CARDU1_PCI_CLOCK:
-			set_cmusrst(CARD1RST);
-			vrc4173_cmuclkmsk &= ~MSKCARD1;
-			break;
-		case VRC4173_CARDU2_PCI_CLOCK:
-			set_cmusrst(CARD2RST);
-			vrc4173_cmuclkmsk &= ~MSKCARD2;
-			break;
-		case VRC4173_AC97U_PCI_CLOCK:
-			set_cmusrst(AC97RST);
-			vrc4173_cmuclkmsk &= ~MSKAC97;
-			break;
-		case VRC4173_USBU_48MHz_CLOCK:
-			set_cmusrst(USBRST);
-			vrc4173_cmuclkmsk &= ~MSK48MUSB;
-			break;
-		case VRC4173_EXT_48MHz_CLOCK:
-			vrc4173_cmuclkmsk &= ~MSK48MPIN;
-			break;
-		case VRC4173_48MHz_CLOCK:
-			vrc4173_cmuclkmsk &= ~MSK48MOSC;
-			break;
-		default:
-			printk(KERN_WARNING "vrc4173_mask_clock: Invalid CLOCK value %u\n", clock);
-			break;
-		}
-
-		vrc4173_outw(vrc4173_cmuclkmsk, VRC4173_CMUCLKMSK);
-
-		switch (clock) {
-		case VRC4173_USBU_PCI_CLOCK:
-		case VRC4173_USBU_48MHz_CLOCK:
-			clear_cmusrst(USBRST);
-			break;
-		case VRC4173_CARDU1_PCI_CLOCK:
-			clear_cmusrst(CARD1RST);
-			break;
-		case VRC4173_CARDU2_PCI_CLOCK:
-			clear_cmusrst(CARD2RST);
-			break;
-		case VRC4173_AC97U_PCI_CLOCK:
-			clear_cmusrst(AC97RST);
-			break;
-		default:
-			break;
-		}
-
-		spin_unlock_irq(&vrc4173_cmu_lock);
-	}
-}
-
-EXPORT_SYMBOL(vrc4173_mask_clock);
-
-static inline void vrc4173_cmu_init(void)
-{
-	vrc4173_cmuclkmsk = vrc4173_inw(VRC4173_CMUCLKMSK);
-
-	spin_lock_init(&vrc4173_cmu_lock);
-}
-
-void vrc4173_select_function(vrc4173_function_t function)
-{
-	if (vrc4173_initialized) {
-		spin_lock_irq(&vrc4173_giu_lock);
-
-		switch(function) {
-		case PS2_CHANNEL1:
-			vrc4173_selectreg |= SEL2;
-			break;
-		case PS2_CHANNEL2:
-			vrc4173_selectreg |= SEL1;
-			break;
-		case TOUCHPANEL:
-			vrc4173_selectreg &= SEL2 | SEL1 | SEL0;
-			break;
-		case KEYBOARD_8SCANLINES:
-			vrc4173_selectreg &= SEL3 | SEL2 | SEL1;
-			break;
-		case KEYBOARD_10SCANLINES:
-			vrc4173_selectreg &= SEL3 | SEL2;
-			break;
-		case KEYBOARD_12SCANLINES:
-			vrc4173_selectreg &= SEL3;
-			break;
-		case GPIO_0_15PINS:
-			vrc4173_selectreg |= SEL0;
-			break;
-		case GPIO_16_20PINS:
-			vrc4173_selectreg |= SEL3;
-			break;
-		}
-
-		vrc4173_outw(vrc4173_selectreg, VRC4173_SELECTREG);
-
-		spin_unlock_irq(&vrc4173_giu_lock);
-	}
-}
-
-EXPORT_SYMBOL(vrc4173_select_function);
-
-static inline void vrc4173_giu_init(void)
-{
-	vrc4173_selectreg = vrc4173_inw(VRC4173_SELECTREG);
-
-	spin_lock_init(&vrc4173_giu_lock);
-}
-
-void vrc4173_enable_piuint(uint16_t mask)
-{
-	irq_desc_t *desc = irq_desc + VRC4173_PIU_IRQ;
-	unsigned long flags;
-	uint16_t val;
-
-	spin_lock_irqsave(&desc->lock, flags);
-	val = vrc4173_inw(VRC4173_MPIUINTREG);
-	val |= mask;
-	vrc4173_outw(val, VRC4173_MPIUINTREG);
-	spin_unlock_irqrestore(&desc->lock, flags);
-}
-
-EXPORT_SYMBOL(vrc4173_enable_piuint);
-
-void vrc4173_disable_piuint(uint16_t mask)
-{
-	irq_desc_t *desc = irq_desc + VRC4173_PIU_IRQ;
-	unsigned long flags;
-	uint16_t val;
-
-	spin_lock_irqsave(&desc->lock, flags);
-	val = vrc4173_inw(VRC4173_MPIUINTREG);
-	val &= ~mask;
-	vrc4173_outw(val, VRC4173_MPIUINTREG);
-	spin_unlock_irqrestore(&desc->lock, flags);
-}
-
-EXPORT_SYMBOL(vrc4173_disable_piuint);
-
-void vrc4173_enable_aiuint(uint16_t mask)
-{
-	irq_desc_t *desc = irq_desc + VRC4173_AIU_IRQ;
-	unsigned long flags;
-	uint16_t val;
-
-	spin_lock_irqsave(&desc->lock, flags);
-	val = vrc4173_inw(VRC4173_MAIUINTREG);
-	val |= mask;
-	vrc4173_outw(val, VRC4173_MAIUINTREG);
-	spin_unlock_irqrestore(&desc->lock, flags);
-}
-
-EXPORT_SYMBOL(vrc4173_enable_aiuint);
-
-void vrc4173_disable_aiuint(uint16_t mask)
-{
-	irq_desc_t *desc = irq_desc + VRC4173_AIU_IRQ;
-	unsigned long flags;
-	uint16_t val;
-
-	spin_lock_irqsave(&desc->lock, flags);
-	val = vrc4173_inw(VRC4173_MAIUINTREG);
-	val &= ~mask;
-	vrc4173_outw(val, VRC4173_MAIUINTREG);
-	spin_unlock_irqrestore(&desc->lock, flags);
-}
-
-EXPORT_SYMBOL(vrc4173_disable_aiuint);
-
-void vrc4173_enable_kiuint(uint16_t mask)
-{
-	irq_desc_t *desc = irq_desc + VRC4173_KIU_IRQ;
-	unsigned long flags;
-	uint16_t val;
-
-	spin_lock_irqsave(&desc->lock, flags);
-	val = vrc4173_inw(VRC4173_MKIUINTREG);
-	val |= mask;
-	vrc4173_outw(val, VRC4173_MKIUINTREG);
-	spin_unlock_irqrestore(&desc->lock, flags);
-}
-
-EXPORT_SYMBOL(vrc4173_enable_kiuint);
-
-void vrc4173_disable_kiuint(uint16_t mask)
-{
-	irq_desc_t *desc = irq_desc + VRC4173_KIU_IRQ;
-	unsigned long flags;
-	uint16_t val;
-
-	spin_lock_irqsave(&desc->lock, flags);
-	val = vrc4173_inw(VRC4173_MKIUINTREG);
-	val &= ~mask;
-	vrc4173_outw(val, VRC4173_MKIUINTREG);
-	spin_unlock_irqrestore(&desc->lock, flags);
-}
-
-EXPORT_SYMBOL(vrc4173_disable_kiuint);
-
-static void enable_vrc4173_irq(unsigned int irq)
-{
-	uint16_t val;
-
-	val = vrc4173_inw(VRC4173_MSYSINT1REG);
-	val |= (uint16_t)1 << (irq - VRC4173_IRQ_BASE);
-	vrc4173_outw(val, VRC4173_MSYSINT1REG);
-}
-
-static void disable_vrc4173_irq(unsigned int irq)
-{
-	uint16_t val;
-
-	val = vrc4173_inw(VRC4173_MSYSINT1REG);
-	val &= ~((uint16_t)1 << (irq - VRC4173_IRQ_BASE));
-	vrc4173_outw(val, VRC4173_MSYSINT1REG);
-}
-
-static unsigned int startup_vrc4173_irq(unsigned int irq)
-{
-	enable_vrc4173_irq(irq);
-	return 0; /* never anything pending */
-}
-
-#define shutdown_vrc4173_irq	disable_vrc4173_irq
-#define ack_vrc4173_irq		disable_vrc4173_irq
-
-static void end_vrc4173_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		enable_vrc4173_irq(irq);
-}
-
-static struct hw_interrupt_type vrc4173_irq_type = {
-	.typename	= "VRC4173",
-	.startup	= startup_vrc4173_irq,
-	.shutdown	= shutdown_vrc4173_irq,
-	.enable		= enable_vrc4173_irq,
-	.disable	= disable_vrc4173_irq,
-	.ack		= ack_vrc4173_irq,
-	.end		= end_vrc4173_irq,
-};
-
-static int vrc4173_get_irq_number(int irq)
-{
-	uint16_t status, mask;
-	int i;
-
-        status = vrc4173_inw(VRC4173_SYSINT1REG);
-        mask = vrc4173_inw(VRC4173_MSYSINT1REG);
-
-	status &= mask;
-	if (status) {
-		for (i = 0; i < 16; i++)
-			if (status & (0x0001 << i))
-				return VRC4173_IRQ(i);
-	}
-
-	return -EINVAL;
-}
-
-static inline int vrc4173_icu_init(int cascade_irq)
-{
-	int i;
-
-	if (cascade_irq < GIU_IRQ(0) || cascade_irq > GIU_IRQ(15))
-		return -EINVAL;
-
-	vrc4173_outw(0, VRC4173_MSYSINT1REG);
-
-	vr41xx_set_irq_trigger(GIU_IRQ_TO_PIN(cascade_irq), TRIGGER_LEVEL, SIGNAL_THROUGH);
-	vr41xx_set_irq_level(GIU_IRQ_TO_PIN(cascade_irq), LEVEL_LOW);
-
-	for (i = VRC4173_IRQ_BASE; i <= VRC4173_IRQ_LAST; i++)
-                irq_desc[i].chip = &vrc4173_irq_type;
-
-	return 0;
-}
-
-static int __devinit vrc4173_probe(struct pci_dev *dev,
-                                   const struct pci_device_id *id)
-{
-	unsigned long start, flags;
-	int err;
-
-	err = pci_enable_device(dev);
-	if (err < 0) {
-		printk(KERN_ERR "vrc4173: Failed to enable PCI device, aborting\n");
-		return err;
-	}
-
-	pci_set_master(dev);
-
-	start = pci_resource_start(dev, 0);
-	if (start == 0) {
-		printk(KERN_ERR "vrc4173:No such PCI I/O resource, aborting\n");
-		return -ENXIO;
-	}
-
-	flags = pci_resource_flags(dev, 0);
-	if ((flags & IORESOURCE_IO) == 0) {
-		printk(KERN_ERR "vrc4173: No such PCI I/O resource, aborting\n");
-		return -ENXIO;
-	}
-
-	err = pci_request_regions(dev, "NEC VRC4173");
-	if (err < 0) {
-		printk(KERN_ERR "vrc4173: PCI resources are busy, aborting\n");
-		return err;
-	}
-
-	set_vrc4173_io_offset(start);
-
-	vrc4173_cmu_init();
-	vrc4173_giu_init();
-
-	err = vrc4173_icu_init(dev->irq);
-	if (err < 0) {
-		printk(KERN_ERR "vrc4173: Invalid IRQ %d, aborting\n", dev->irq);
-		return err;
-	}
-
-	err = vr41xx_cascade_irq(dev->irq, vrc4173_get_irq_number);
-	if (err < 0) {
-		printk(KERN_ERR "vrc4173: IRQ resource %d is busy, aborting\n", dev->irq);
-		return err;
-	}
-
-	printk(KERN_INFO
-	       "NEC VRC4173 at 0x%#08lx, IRQ is cascaded to %d\n", start, dev->irq);
-
-	return 0;
-}
-
-static void vrc4173_remove(struct pci_dev *dev)
-{
-	free_irq(dev->irq, NULL);
-
-	pci_release_regions(dev);
-}
-
-static struct pci_driver vrc4173_driver = {
-	.name		= "NEC VRC4173",
-	.probe		= vrc4173_probe,
-	.remove		= vrc4173_remove,
-	.id_table	= vrc4173_id_table,
-};
-
-static int __devinit vrc4173_init(void)
-{
-	int err;
-
-	err = pci_register_driver(&vrc4173_driver);
-	if (err < 0)
-		return err;
-
-	vrc4173_initialized = 1;
-
-	return 0;
-}
-
-static void __devexit vrc4173_exit(void)
-{
-	vrc4173_initialized = 0;
-
-	pci_unregister_driver(&vrc4173_driver);
-}
-
-module_init(vrc4173_init);
-module_exit(vrc4173_exit);
diff -urN linux-2.6.18-rc1/arch/mips/vr41xx/ibm-workpad/setup.c linux-2.6.18-rc2/arch/mips/vr41xx/ibm-workpad/setup.c
--- linux-2.6.18-rc1/arch/mips/vr41xx/ibm-workpad/setup.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/mips/vr41xx/ibm-workpad/setup.c	2006-07-15 22:34:46.881464689 +0000
@@ -1,7 +1,7 @@
 /*
  *  setup.c, Setup for the IBM WorkPad z50.
  *
- *  Copyright (C) 2002-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -21,13 +21,18 @@
 #include <linux/ioport.h>
 
 #include <asm/io.h>
-#include <asm/vr41xx/workpad.h>
+
+#define WORKPAD_ISA_IO_BASE	0x15000000
+#define WORKPAD_ISA_IO_SIZE	0x03000000
+#define WORKPAD_ISA_IO_START	0
+#define WORKPAD_ISA_IO_END	(WORKPAD_ISA_IO_SIZE - 1)
+#define WORKPAD_IO_PORT_BASE	KSEG1ADDR(WORKPAD_ISA_IO_BASE)
 
 static int __init ibm_workpad_setup(void)
 {
-	set_io_port_base(IO_PORT_BASE);
-	ioport_resource.start = IO_PORT_RESOURCE_START;
-	ioport_resource.end = IO_PORT_RESOURCE_END;
+	set_io_port_base(WORKPAD_IO_PORT_BASE);
+	ioport_resource.start = WORKPAD_ISA_IO_START;
+	ioport_resource.end = WORKPAD_ISA_IO_END;
 
 	return 0;
 }
diff -urN linux-2.6.18-rc1/arch/mips/vr41xx/nec-cmbvr4133/irq.c linux-2.6.18-rc2/arch/mips/vr41xx/nec-cmbvr4133/irq.c
--- linux-2.6.18-rc1/arch/mips/vr41xx/nec-cmbvr4133/irq.c	2006-07-15 22:34:41.692901479 +0000
+++ linux-2.6.18-rc2/arch/mips/vr41xx/nec-cmbvr4133/irq.c	2006-07-15 22:34:46.881464689 +0000
@@ -62,7 +62,7 @@
 		enable_8259A_irq(irq - I8259_IRQ_BASE);
 }
 
-static struct hw_interrupt_type i8259_irq_type = {
+static struct irq_chip i8259_irq_type = {
 	.typename       = "XT-PIC",
 	.startup        = startup_i8259_irq,
 	.shutdown       = shutdown_i8259_irq,
diff -urN linux-2.6.18-rc1/arch/parisc/kernel/pdc_cons.c linux-2.6.18-rc2/arch/parisc/kernel/pdc_cons.c
--- linux-2.6.18-rc1/arch/parisc/kernel/pdc_cons.c	2006-07-15 22:34:41.696901914 +0000
+++ linux-2.6.18-rc2/arch/parisc/kernel/pdc_cons.c	2006-07-15 22:34:46.885465123 +0000
@@ -89,6 +89,8 @@
 }
 
 #if defined(CONFIG_PDC_CONSOLE)
+#include <linux/vt_kern.h>
+
 static struct tty_driver * pdc_console_device (struct console *c, int *index)
 {
 	extern struct tty_driver console_driver;
diff -urN linux-2.6.18-rc1/arch/powerpc/kernel/ibmebus.c linux-2.6.18-rc2/arch/powerpc/kernel/ibmebus.c
--- linux-2.6.18-rc1/arch/powerpc/kernel/ibmebus.c	2006-07-15 22:34:41.712903651 +0000
+++ linux-2.6.18-rc2/arch/powerpc/kernel/ibmebus.c	2006-07-15 22:34:46.905467294 +0000
@@ -323,7 +323,7 @@
 			unsigned long irq_flags, const char * devname,
 			void *dev_id)
 {
-	unsigned int irq = irq_create_mapping(NULL, ist, 0);
+	unsigned int irq = irq_create_mapping(NULL, ist);
 	
 	if (irq == NO_IRQ)
 		return -EINVAL;
diff -urN linux-2.6.18-rc1/arch/powerpc/kernel/irq.c linux-2.6.18-rc2/arch/powerpc/kernel/irq.c
--- linux-2.6.18-rc1/arch/powerpc/kernel/irq.c	2006-07-15 22:34:41.716904085 +0000
+++ linux-2.6.18-rc2/arch/powerpc/kernel/irq.c	2006-07-15 22:34:46.905467294 +0000
@@ -391,15 +391,14 @@
 			irq_map[i].host = host;
 			smp_wmb();
 
-			/* Clear some flags */
-			get_irq_desc(i)->status
-				&= ~(IRQ_NOREQUEST | IRQ_LEVEL);
+			/* Clear norequest flags */
+			get_irq_desc(i)->status &= ~IRQ_NOREQUEST;
 
 			/* Legacy flags are left to default at this point,
 			 * one can then use irq_create_mapping() to
 			 * explicitely change them
 			 */
-			ops->map(host, i, i, 0);
+			ops->map(host, i, i);
 		}
 		break;
 	case IRQ_HOST_MAP_LINEAR:
@@ -457,13 +456,11 @@
 }
 
 unsigned int irq_create_mapping(struct irq_host *host,
-				irq_hw_number_t hwirq,
-				unsigned int flags)
+				irq_hw_number_t hwirq)
 {
 	unsigned int virq, hint;
 
-	pr_debug("irq: irq_create_mapping(0x%p, 0x%lx, 0x%x)\n",
-		 host, hwirq, flags);
+	pr_debug("irq: irq_create_mapping(0x%p, 0x%lx)\n", host, hwirq);
 
 	/* Look for default host if nececssary */
 	if (host == NULL)
@@ -482,7 +479,6 @@
 	virq = irq_find_mapping(host, hwirq);
 	if (virq != IRQ_NONE) {
 		pr_debug("irq: -> existing mapping on virq %d\n", virq);
-		host->ops->map(host, virq, hwirq, flags);
 		return virq;
 	}
 
@@ -504,18 +500,18 @@
 	}
 	pr_debug("irq: -> obtained virq %d\n", virq);
 
-	/* Clear some flags */
-	get_irq_desc(virq)->status &= ~(IRQ_NOREQUEST | IRQ_LEVEL);
+	/* Clear IRQ_NOREQUEST flag */
+	get_irq_desc(virq)->status &= ~IRQ_NOREQUEST;
 
 	/* map it */
-	if (host->ops->map(host, virq, hwirq, flags)) {
+	smp_wmb();
+	irq_map[virq].hwirq = hwirq;
+	smp_mb();
+	if (host->ops->map(host, virq, hwirq)) {
 		pr_debug("irq: -> mapping failed, freeing\n");
 		irq_free_virt(virq, 1);
 		return NO_IRQ;
 	}
-	smp_wmb();
-	irq_map[virq].hwirq = hwirq;
-	smp_mb();
 	return virq;
 }
 EXPORT_SYMBOL_GPL(irq_create_mapping);
@@ -525,25 +521,38 @@
 {
 	struct irq_host *host;
 	irq_hw_number_t hwirq;
-	unsigned int flags = IRQ_TYPE_NONE;
+	unsigned int type = IRQ_TYPE_NONE;
+	unsigned int virq;
 
 	if (controller == NULL)
 		host = irq_default_host;
 	else
 		host = irq_find_host(controller);
-	if (host == NULL)
+	if (host == NULL) {
+		printk(KERN_WARNING "irq: no irq host found for %s !\n",
+		       controller->full_name);
 		return NO_IRQ;
+	}
 
 	/* If host has no translation, then we assume interrupt line */
 	if (host->ops->xlate == NULL)
 		hwirq = intspec[0];
 	else {
 		if (host->ops->xlate(host, controller, intspec, intsize,
-				     &hwirq, &flags))
+				     &hwirq, &type))
 			return NO_IRQ;
 	}
 
-	return irq_create_mapping(host, hwirq, flags);
+	/* Create mapping */
+	virq = irq_create_mapping(host, hwirq);
+	if (virq == NO_IRQ)
+		return virq;
+
+	/* Set type if specified and different than the current one */
+	if (type != IRQ_TYPE_NONE &&
+	    type != (get_irq_desc(virq)->status & IRQF_TRIGGER_MASK))
+		set_irq_type(virq, type);
+	return virq;
 }
 EXPORT_SYMBOL_GPL(irq_create_of_mapping);
 
diff -urN linux-2.6.18-rc1/arch/powerpc/kernel/pci_32.c linux-2.6.18-rc2/arch/powerpc/kernel/pci_32.c
--- linux-2.6.18-rc1/arch/powerpc/kernel/pci_32.c	2006-07-15 22:34:41.720904519 +0000
+++ linux-2.6.18-rc2/arch/powerpc/kernel/pci_32.c	2006-07-15 22:34:46.909467729 +0000
@@ -11,6 +11,7 @@
 #include <linux/sched.h>
 #include <linux/errno.h>
 #include <linux/bootmem.h>
+#include <linux/irq.h>
 
 #include <asm/processor.h>
 #include <asm/io.h>
@@ -18,7 +19,6 @@
 #include <asm/sections.h>
 #include <asm/pci-bridge.h>
 #include <asm/byteorder.h>
-#include <asm/irq.h>
 #include <asm/uaccess.h>
 #include <asm/machdep.h>
 
@@ -1420,15 +1420,37 @@
 
 	DBG("Try to map irq for %s...\n", pci_name(pci_dev));
 
+	/* Try to get a mapping from the device-tree */
 	if (of_irq_map_pci(pci_dev, &oirq)) {
-		DBG(" -> failed !\n");
-		return -1;
-	}
+		u8 line, pin;
+
+		/* If that fails, lets fallback to what is in the config
+		 * space and map that through the default controller. We
+		 * also set the type to level low since that's what PCI
+		 * interrupts are. If your platform does differently, then
+		 * either provide a proper interrupt tree or don't use this
+		 * function.
+		 */
+		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin))
+			return -1;
+		if (pin == 0)
+			return -1;
+		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) ||
+		    line == 0xff) {
+			return -1;
+		}
+		DBG(" -> no map ! Using irq line %d from PCI config\n", line);
 
-	DBG(" -> got one, spec %d cells (0x%08x...) on %s\n",
-	    oirq.size, oirq.specifier[0], oirq.controller->full_name);
+		virq = irq_create_mapping(NULL, line);
+		if (virq != NO_IRQ)
+			set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
+	} else {
+		DBG(" -> got one, spec %d cells (0x%08x...) on %s\n",
+		    oirq.size, oirq.specifier[0], oirq.controller->full_name);
 
-	virq = irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size);
+		virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+					     oirq.size);
+	}
 	if(virq == NO_IRQ) {
 		DBG(" -> failed to map !\n");
 		return -1;
diff -urN linux-2.6.18-rc1/arch/powerpc/kernel/pci_64.c linux-2.6.18-rc2/arch/powerpc/kernel/pci_64.c
--- linux-2.6.18-rc1/arch/powerpc/kernel/pci_64.c	2006-07-15 22:34:41.720904519 +0000
+++ linux-2.6.18-rc2/arch/powerpc/kernel/pci_64.c	2006-07-15 22:34:46.913468163 +0000
@@ -21,13 +21,13 @@
 #include <linux/mm.h>
 #include <linux/list.h>
 #include <linux/syscalls.h>
+#include <linux/irq.h>
 
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/pci-bridge.h>
 #include <asm/byteorder.h>
-#include <asm/irq.h>
 #include <asm/machdep.h>
 #include <asm/ppc-pci.h>
 
@@ -1289,15 +1289,37 @@
 
 	DBG("Try to map irq for %s...\n", pci_name(pci_dev));
 
+	/* Try to get a mapping from the device-tree */
 	if (of_irq_map_pci(pci_dev, &oirq)) {
-		DBG(" -> failed !\n");
-		return -1;
-	}
+		u8 line, pin;
 
-	DBG(" -> got one, spec %d cells (0x%08x...) on %s\n",
-	    oirq.size, oirq.specifier[0], oirq.controller->full_name);
+		/* If that fails, lets fallback to what is in the config
+		 * space and map that through the default controller. We
+		 * also set the type to level low since that's what PCI
+		 * interrupts are. If your platform does differently, then
+		 * either provide a proper interrupt tree or don't use this
+		 * function.
+		 */
+		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin))
+			return -1;
+		if (pin == 0)
+			return -1;
+		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) ||
+		    line == 0xff) {
+			return -1;
+		}
+		DBG(" -> no map ! Using irq line %d from PCI config\n", line);
 
-	virq = irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size);
+		virq = irq_create_mapping(NULL, line);
+		if (virq != NO_IRQ)
+			set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
+	} else {
+		DBG(" -> got one, spec %d cells (0x%08x...) on %s\n",
+		    oirq.size, oirq.specifier[0], oirq.controller->full_name);
+
+		virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+					     oirq.size);
+	}
 	if(virq == NO_IRQ) {
 		DBG(" -> failed to map !\n");
 		return -1;
diff -urN linux-2.6.18-rc1/arch/powerpc/kernel/ppc_ksyms.c linux-2.6.18-rc2/arch/powerpc/kernel/ppc_ksyms.c
--- linux-2.6.18-rc1/arch/powerpc/kernel/ppc_ksyms.c	2006-07-15 22:34:41.720904519 +0000
+++ linux-2.6.18-rc2/arch/powerpc/kernel/ppc_ksyms.c	2006-07-15 22:34:46.913468163 +0000
@@ -5,7 +5,7 @@
 #include <linux/elfcore.h>
 #include <linux/string.h>
 #include <linux/interrupt.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/vt_kern.h>
 #include <linux/nvram.h>
 #include <linux/console.h>
diff -urN linux-2.6.18-rc1/arch/powerpc/kernel/prom_parse.c linux-2.6.18-rc2/arch/powerpc/kernel/prom_parse.c
--- linux-2.6.18-rc1/arch/powerpc/kernel/prom_parse.c	2006-07-15 22:34:41.724904953 +0000
+++ linux-2.6.18-rc2/arch/powerpc/kernel/prom_parse.c	2006-07-15 22:34:46.917468597 +0000
@@ -881,7 +881,7 @@
 	intsize = *tmp;
 
 	/* Check index */
-	if (index * intsize >= intlen)
+	if ((index + 1) * intsize > intlen)
 		return -EINVAL;
 
 	/* Get new specifier and map it */
diff -urN linux-2.6.18-rc1/arch/powerpc/kernel/setup-common.c linux-2.6.18-rc2/arch/powerpc/kernel/setup-common.c
--- linux-2.6.18-rc1/arch/powerpc/kernel/setup-common.c	2006-07-15 22:34:41.724904953 +0000
+++ linux-2.6.18-rc2/arch/powerpc/kernel/setup-common.c	2006-07-15 22:34:46.917468597 +0000
@@ -26,7 +26,7 @@
 #include <linux/ioport.h>
 #include <linux/console.h>
 #include <linux/utsname.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/root_dev.h>
 #include <linux/notifier.h>
 #include <linux/cpu.h>
diff -urN linux-2.6.18-rc1/arch/powerpc/platforms/cell/interrupt.c linux-2.6.18-rc2/arch/powerpc/platforms/cell/interrupt.c
--- linux-2.6.18-rc1/arch/powerpc/platforms/cell/interrupt.c	2006-07-15 22:34:41.744907125 +0000
+++ linux-2.6.18-rc2/arch/powerpc/platforms/cell/interrupt.c	2006-07-15 22:34:46.937470768 +0000
@@ -159,7 +159,7 @@
 		if (iic_hosts[node] == NULL)
 			continue;
 		virq = irq_create_mapping(iic_hosts[node],
-					  iic_ipi_to_irq(ipi), 0);
+					  iic_ipi_to_irq(ipi));
 		if (virq == NO_IRQ) {
 			printk(KERN_ERR
 			       "iic: failed to map IPI %s on node %d\n",
@@ -197,7 +197,7 @@
 }
 
 static int iic_host_map(struct irq_host *h, unsigned int virq,
-			irq_hw_number_t hw, unsigned int flags)
+			irq_hw_number_t hw)
 {
 	if (hw < IIC_IRQ_IPI0)
 		set_irq_chip_and_handler(virq, &iic_chip, handle_fasteoi_irq);
diff -urN linux-2.6.18-rc1/arch/powerpc/platforms/cell/spider-pic.c linux-2.6.18-rc2/arch/powerpc/platforms/cell/spider-pic.c
--- linux-2.6.18-rc1/arch/powerpc/platforms/cell/spider-pic.c	2006-07-15 22:34:41.744907125 +0000
+++ linux-2.6.18-rc2/arch/powerpc/platforms/cell/spider-pic.c	2006-07-15 22:34:46.941471202 +0000
@@ -85,9 +85,6 @@
 	struct spider_pic *pic = spider_virq_to_pic(virq);
 	void __iomem *cfg = spider_get_irq_config(pic, irq_map[virq].hwirq);
 
-	/* We use no locking as we should be covered by the descriptor lock
-	 * for access to invidual source configuration registers
-	 */
 	out_be32(cfg, in_be32(cfg) | 0x30000000u);
 }
 
@@ -96,9 +93,6 @@
 	struct spider_pic *pic = spider_virq_to_pic(virq);
 	void __iomem *cfg = spider_get_irq_config(pic, irq_map[virq].hwirq);
 
-	/* We use no locking as we should be covered by the descriptor lock
-	 * for access to invidual source configuration registers
-	 */
 	out_be32(cfg, in_be32(cfg) & ~0x30000000u);
 }
 
@@ -120,26 +114,14 @@
 	out_be32(pic->regs + TIR_EDC, 0x100 | (src & 0xf));
 }
 
-static struct irq_chip spider_pic = {
-	.typename = " SPIDER   ",
-	.unmask = spider_unmask_irq,
-	.mask = spider_mask_irq,
-	.ack = spider_ack_irq,
-};
-
-static int spider_host_match(struct irq_host *h, struct device_node *node)
-{
-	struct spider_pic *pic = h->host_data;
-	return node == pic->of_node;
-}
-
-static int spider_host_map(struct irq_host *h, unsigned int virq,
-			irq_hw_number_t hw, unsigned int flags)
+static int spider_set_irq_type(unsigned int virq, unsigned int type)
 {
-	unsigned int sense = flags & IRQ_TYPE_SENSE_MASK;
-	struct spider_pic *pic = h->host_data;
+	unsigned int sense = type & IRQ_TYPE_SENSE_MASK;
+	struct spider_pic *pic = spider_virq_to_pic(virq);
+	unsigned int hw = irq_map[virq].hwirq;
 	void __iomem *cfg = spider_get_irq_config(pic, hw);
-	int level = 0;
+	struct irq_desc *desc = get_irq_desc(virq);
+	u32 old_mask;
 	u32 ic;
 
 	/* Note that only level high is supported for most interrupts */
@@ -157,29 +139,57 @@
 		break;
 	case IRQ_TYPE_LEVEL_LOW:
 		ic = 0x0;
-		level = 1;
 		break;
 	case IRQ_TYPE_LEVEL_HIGH:
 	case IRQ_TYPE_NONE:
 		ic = 0x1;
-		level = 1;
 		break;
 	default:
 		return -EINVAL;
 	}
 
+	/* Update irq_desc */
+	desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+	desc->status |= type & IRQ_TYPE_SENSE_MASK;
+	if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
+		desc->status |= IRQ_LEVEL;
+
 	/* Configure the source. One gross hack that was there before and
 	 * that I've kept around is the priority to the BE which I set to
 	 * be the same as the interrupt source number. I don't know wether
 	 * that's supposed to make any kind of sense however, we'll have to
 	 * decide that, but for now, I'm not changing the behaviour.
 	 */
-	out_be32(cfg, (ic << 24) | (0x7 << 16) | (pic->node_id << 4) | 0xe);
+	old_mask = in_be32(cfg) & 0x30000000u;
+	out_be32(cfg, old_mask | (ic << 24) | (0x7 << 16) |
+		 (pic->node_id << 4) | 0xe);
 	out_be32(cfg + 4, (0x2 << 16) | (hw & 0xff));
 
-	if (level)
-		get_irq_desc(virq)->status |= IRQ_LEVEL;
+	return 0;
+}
+
+static struct irq_chip spider_pic = {
+	.typename = " SPIDER   ",
+	.unmask = spider_unmask_irq,
+	.mask = spider_mask_irq,
+	.ack = spider_ack_irq,
+	.set_type = spider_set_irq_type,
+};
+
+static int spider_host_match(struct irq_host *h, struct device_node *node)
+{
+	struct spider_pic *pic = h->host_data;
+	return node == pic->of_node;
+}
+
+static int spider_host_map(struct irq_host *h, unsigned int virq,
+			irq_hw_number_t hw)
+{
 	set_irq_chip_and_handler(virq, &spider_pic, handle_level_irq);
+
+	/* Set default irq type */
+	set_irq_type(virq, IRQ_TYPE_NONE);
+
 	return 0;
 }
 
@@ -283,7 +293,7 @@
 	if (iic_host == NULL)
 		return NO_IRQ;
 	/* Manufacture an IIC interrupt number of class 2 */
-	virq = irq_create_mapping(iic_host, 0x20 | unit, 0);
+	virq = irq_create_mapping(iic_host, 0x20 | unit);
 	if (virq == NO_IRQ)
 		printk(KERN_ERR "spider_pic: failed to map cascade !");
 	return virq;
diff -urN linux-2.6.18-rc1/arch/powerpc/platforms/cell/spu_base.c linux-2.6.18-rc2/arch/powerpc/platforms/cell/spu_base.c
--- linux-2.6.18-rc1/arch/powerpc/platforms/cell/spu_base.c	2006-07-15 22:34:41.748907559 +0000
+++ linux-2.6.18-rc2/arch/powerpc/platforms/cell/spu_base.c	2006-07-15 22:34:46.941471202 +0000
@@ -583,9 +583,9 @@
 	spu->isrc = isrc = tmp[0];
 
 	/* Now map interrupts of all 3 classes */
-	spu->irqs[0] = irq_create_mapping(host, 0x00 | isrc, 0);
-	spu->irqs[1] = irq_create_mapping(host, 0x10 | isrc, 0);
-	spu->irqs[2] = irq_create_mapping(host, 0x20 | isrc, 0);
+	spu->irqs[0] = irq_create_mapping(host, 0x00 | isrc);
+	spu->irqs[1] = irq_create_mapping(host, 0x10 | isrc);
+	spu->irqs[2] = irq_create_mapping(host, 0x20 | isrc);
 
 	/* Right now, we only fail if class 2 failed */
 	return spu->irqs[2] == NO_IRQ ? -EINVAL : 0;
diff -urN linux-2.6.18-rc1/arch/powerpc/platforms/iseries/irq.c linux-2.6.18-rc2/arch/powerpc/platforms/iseries/irq.c
--- linux-2.6.18-rc1/arch/powerpc/platforms/iseries/irq.c	2006-07-15 22:34:41.756908427 +0000
+++ linux-2.6.18-rc2/arch/powerpc/platforms/iseries/irq.c	2006-07-15 22:34:46.953472505 +0000
@@ -300,7 +300,7 @@
 	realirq = (((((sub_bus << 8) + (bus - 1)) << 3) + (idsel - 1)) << 3)
 		+ function;
 
-	return irq_create_mapping(NULL, realirq, IRQ_TYPE_NONE);
+	return irq_create_mapping(NULL, realirq);
 }
 
 #endif /* CONFIG_PCI */
@@ -341,7 +341,7 @@
 }
 
 static int iseries_irq_host_map(struct irq_host *h, unsigned int virq,
-				irq_hw_number_t hw, unsigned int flags)
+				irq_hw_number_t hw)
 {
 	set_irq_chip_and_handler(virq, &iseries_pic, handle_fasteoi_irq);
 
diff -urN linux-2.6.18-rc1/arch/powerpc/platforms/powermac/backlight.c linux-2.6.18-rc2/arch/powerpc/platforms/powermac/backlight.c
--- linux-2.6.18-rc1/arch/powerpc/platforms/powermac/backlight.c	2006-07-15 22:34:41.760908862 +0000
+++ linux-2.6.18-rc2/arch/powerpc/platforms/powermac/backlight.c	2006-07-15 22:34:46.957472939 +0000
@@ -15,6 +15,15 @@
 
 #define OLD_BACKLIGHT_MAX 15
 
+static void pmac_backlight_key_worker(void *data);
+static DECLARE_WORK(pmac_backlight_key_work, pmac_backlight_key_worker, NULL);
+
+/* Although this variable is used in interrupt context, it makes no sense to
+ * protect it. No user is able to produce enough key events per second and
+ * notice the errors that might happen.
+ */
+static int pmac_backlight_key_queued;
+
 /* Protect the pmac_backlight variable */
 DEFINE_MUTEX(pmac_backlight_mutex);
 
@@ -71,7 +80,7 @@
 	return level;
 }
 
-static void pmac_backlight_key(int direction)
+static void pmac_backlight_key_worker(void *data)
 {
 	mutex_lock(&pmac_backlight_mutex);
 	if (pmac_backlight) {
@@ -82,7 +91,8 @@
 		props = pmac_backlight->props;
 
 		brightness = props->brightness +
-			((direction?-1:1) * (props->max_brightness / 15));
+			((pmac_backlight_key_queued?-1:1) *
+			 (props->max_brightness / 15));
 
 		if (brightness < 0)
 			brightness = 0;
@@ -97,14 +107,13 @@
 	mutex_unlock(&pmac_backlight_mutex);
 }
 
-void pmac_backlight_key_up()
+void pmac_backlight_key(int direction)
 {
-	pmac_backlight_key(0);
-}
-
-void pmac_backlight_key_down()
-{
-	pmac_backlight_key(1);
+	/* we can receive multiple interrupts here, but the scheduled work
+	 * will run only once, with the last value
+	 */
+	pmac_backlight_key_queued = direction;
+	schedule_work(&pmac_backlight_key_work);
 }
 
 int pmac_backlight_set_legacy_brightness(int brightness)
@@ -157,3 +166,7 @@
 
 	return result;
 }
+
+EXPORT_SYMBOL_GPL(pmac_backlight);
+EXPORT_SYMBOL_GPL(pmac_backlight_mutex);
+EXPORT_SYMBOL_GPL(pmac_has_backlight_type);
diff -urN linux-2.6.18-rc1/arch/powerpc/platforms/powermac/pci.c linux-2.6.18-rc2/arch/powerpc/platforms/powermac/pci.c
--- linux-2.6.18-rc1/arch/powerpc/platforms/powermac/pci.c	2006-07-15 22:34:41.764909296 +0000
+++ linux-2.6.18-rc2/arch/powerpc/platforms/powermac/pci.c	2006-07-15 22:34:46.961473374 +0000
@@ -16,6 +16,7 @@
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
+#include <linux/irq.h>
 
 #include <asm/sections.h>
 #include <asm/io.h>
@@ -24,10 +25,7 @@
 #include <asm/machdep.h>
 #include <asm/pmac_feature.h>
 #include <asm/grackle.h>
-#ifdef CONFIG_PPC64
-//#include <asm/iommu.h>
 #include <asm/ppc-pci.h>
-#endif
 
 #undef DEBUG
 
@@ -46,7 +44,6 @@
 static struct pci_controller *u3_agp;
 static struct pci_controller *u4_pcie;
 static struct pci_controller *u3_ht;
-#define has_second_ohare 0
 #else
 static int has_second_ohare;
 #endif /* CONFIG_PPC64 */
@@ -993,6 +990,7 @@
 		/* Read interrupt from the device-tree */
 		pci_read_irq_line(dev);
 
+#ifdef CONFIG_PPC32
 		/* Fixup interrupt for the modem/ethernet combo controller.
 		 * on machines with a second ohare chip.
 		 * The number in the device tree (27) is bogus (correct for
@@ -1002,8 +1000,11 @@
 		 */
 		if (has_second_ohare &&
 		    dev->vendor == PCI_VENDOR_ID_DEC &&
-		    dev->device == PCI_DEVICE_ID_DEC_TULIP_PLUS)
-			dev->irq = irq_create_mapping(NULL, 60, 0);
+		    dev->device == PCI_DEVICE_ID_DEC_TULIP_PLUS) {
+			dev->irq = irq_create_mapping(NULL, 60);
+			set_irq_type(dev->irq, IRQ_TYPE_LEVEL_LOW);
+		}
+#endif /* CONFIG_PPC32 */
 	}
 }
 
diff -urN linux-2.6.18-rc1/arch/powerpc/platforms/powermac/pic.c linux-2.6.18-rc2/arch/powerpc/platforms/powermac/pic.c
--- linux-2.6.18-rc1/arch/powerpc/platforms/powermac/pic.c	2006-07-15 22:34:41.764909296 +0000
+++ linux-2.6.18-rc2/arch/powerpc/platforms/powermac/pic.c	2006-07-15 22:34:46.965473808 +0000
@@ -291,7 +291,7 @@
 }
 
 static int pmac_pic_host_map(struct irq_host *h, unsigned int virq,
-			     irq_hw_number_t hw, unsigned int flags)
+			     irq_hw_number_t hw)
 {
 	struct irq_desc *desc = get_irq_desc(virq);
 	int level;
@@ -318,6 +318,7 @@
 			       unsigned int *out_flags)
 
 {
+	*out_flags = IRQ_TYPE_NONE;
 	*out_hwirq = *intspec;
 	return 0;
 }
@@ -434,7 +435,7 @@
 
 	printk(KERN_INFO "irq: System has %d possible interrupts\n", max_irqs);
 #ifdef CONFIG_XMON
-	setup_irq(irq_create_mapping(NULL, 20, 0), &xmon_action);
+	setup_irq(irq_create_mapping(NULL, 20), &xmon_action);
 #endif
 }
 #endif /* CONFIG_PPC32 */
@@ -579,9 +580,10 @@
 		flags |= OF_IMAP_OLDWORLD_MAC;
 	if (get_property(of_chosen, "linux,bootx", NULL) != NULL)
 		flags |= OF_IMAP_NO_PHANDLE;
-	of_irq_map_init(flags);
 #endif /* CONFIG_PPC_32 */
 
+	of_irq_map_init(flags);
+
 	/* We first try to detect Apple's new Core99 chipset, since mac-io
 	 * is quite different on those machines and contains an IBM MPIC2.
 	 */
diff -urN linux-2.6.18-rc1/arch/powerpc/platforms/pseries/ras.c linux-2.6.18-rc2/arch/powerpc/platforms/pseries/ras.c
--- linux-2.6.18-rc1/arch/powerpc/platforms/pseries/ras.c	2006-07-15 22:34:41.768909730 +0000
+++ linux-2.6.18-rc2/arch/powerpc/platforms/pseries/ras.c	2006-07-15 22:34:46.969474242 +0000
@@ -93,8 +93,7 @@
 		for (i = 0; i < opicplen; i++) {
 			if (count > 15)
 				break;
-			virqs[count] = irq_create_mapping(NULL, *(opicprop++),
-							 IRQ_TYPE_NONE);
+			virqs[count] = irq_create_mapping(NULL, *(opicprop++));
 			if (virqs[count] == NO_IRQ)
 				printk(KERN_ERR "Unable to allocate interrupt "
 				       "number for %s\n", np->full_name);
diff -urN linux-2.6.18-rc1/arch/powerpc/platforms/pseries/xics.c linux-2.6.18-rc2/arch/powerpc/platforms/pseries/xics.c
--- linux-2.6.18-rc1/arch/powerpc/platforms/pseries/xics.c	2006-07-15 22:34:41.772910164 +0000
+++ linux-2.6.18-rc2/arch/powerpc/platforms/pseries/xics.c	2006-07-15 22:34:46.969474242 +0000
@@ -502,16 +502,9 @@
 }
 
 static int xics_host_map_direct(struct irq_host *h, unsigned int virq,
-				irq_hw_number_t hw, unsigned int flags)
+				irq_hw_number_t hw)
 {
-	unsigned int sense = flags & IRQ_TYPE_SENSE_MASK;
-
-	pr_debug("xics: map_direct virq %d, hwirq 0x%lx, flags: 0x%x\n",
-		 virq, hw, flags);
-
-	if (sense && sense != IRQ_TYPE_LEVEL_LOW)
-		printk(KERN_WARNING "xics: using unsupported sense 0x%x"
-		       " for irq %d (h: 0x%lx)\n", flags, virq, hw);
+	pr_debug("xics: map_direct virq %d, hwirq 0x%lx\n", virq, hw);
 
 	get_irq_desc(virq)->status |= IRQ_LEVEL;
 	set_irq_chip_and_handler(virq, &xics_pic_direct, handle_fasteoi_irq);
@@ -519,16 +512,9 @@
 }
 
 static int xics_host_map_lpar(struct irq_host *h, unsigned int virq,
-			      irq_hw_number_t hw, unsigned int flags)
+			      irq_hw_number_t hw)
 {
-	unsigned int sense = flags & IRQ_TYPE_SENSE_MASK;
-
-	pr_debug("xics: map_lpar virq %d, hwirq 0x%lx, flags: 0x%x\n",
-		 virq, hw, flags);
-
-	if (sense && sense != IRQ_TYPE_LEVEL_LOW)
-		printk(KERN_WARNING "xics: using unsupported sense 0x%x"
-		       " for irq %d (h: 0x%lx)\n", flags, virq, hw);
+	pr_debug("xics: map_direct virq %d, hwirq 0x%lx\n", virq, hw);
 
 	get_irq_desc(virq)->status |= IRQ_LEVEL;
 	set_irq_chip_and_handler(virq, &xics_pic_lpar, handle_fasteoi_irq);
@@ -757,7 +743,7 @@
 {
 	unsigned int ipi;
 
-	ipi = irq_create_mapping(xics_host, XICS_IPI, 0);
+	ipi = irq_create_mapping(xics_host, XICS_IPI);
 	BUG_ON(ipi == NO_IRQ);
 
 	/*
@@ -783,6 +769,14 @@
 	xics_set_cpu_priority(cpu, 0);
 
 	/*
+	 * Clear IPI
+	 */
+	if (firmware_has_feature(FW_FEATURE_LPAR))
+		lpar_qirr_info(cpu, 0xff);
+	else
+		direct_qirr_info(cpu, 0xff);
+
+	/*
 	 * we need to EOI the IPI if we got here from kexec down IPI
 	 *
 	 * probably need to check all the other interrupts too
@@ -795,7 +789,7 @@
 		return;
 	desc = get_irq_desc(ipi);
 	if (desc->chip && desc->chip->eoi)
-		desc->chip->eoi(XICS_IPI);
+		desc->chip->eoi(ipi);
 
 	/*
 	 * Some machines need to have at least one cpu in the GIQ,
diff -urN linux-2.6.18-rc1/arch/powerpc/sysdev/i8259.c linux-2.6.18-rc2/arch/powerpc/sysdev/i8259.c
--- linux-2.6.18-rc1/arch/powerpc/sysdev/i8259.c	2006-07-15 22:34:41.772910164 +0000
+++ linux-2.6.18-rc2/arch/powerpc/sysdev/i8259.c	2006-07-15 22:34:46.973474676 +0000
@@ -169,7 +169,7 @@
 }
 
 static int i8259_host_map(struct irq_host *h, unsigned int virq,
-			  irq_hw_number_t hw, unsigned int flags)
+			  irq_hw_number_t hw)
 {
 	pr_debug("i8259_host_map(%d, 0x%lx)\n", virq, hw);
 
@@ -177,7 +177,7 @@
 	if (hw == 2)
 		get_irq_desc(virq)->status |= IRQ_NOREQUEST;
 
-	/* We use the level stuff only for now, we might want to
+	/* We use the level handler only for now, we might want to
 	 * be more cautious here but that works for now
 	 */
 	get_irq_desc(virq)->status |= IRQ_LEVEL;
diff -urN linux-2.6.18-rc1/arch/powerpc/sysdev/mpic.c linux-2.6.18-rc2/arch/powerpc/sysdev/mpic.c
--- linux-2.6.18-rc1/arch/powerpc/sysdev/mpic.c	2006-07-15 22:34:41.772910164 +0000
+++ linux-2.6.18-rc2/arch/powerpc/sysdev/mpic.c	2006-07-15 22:34:46.973474676 +0000
@@ -204,7 +204,7 @@
 	if (fixup->base == NULL)
 		return;
 
-	DBG("startup_ht_interrupt(%u, %u) index: %d\n",
+	DBG("startup_ht_interrupt(0x%x, 0x%x) index: %d\n",
 	    source, irqflags, fixup->index);
 	spin_lock_irqsave(&mpic->fixup_lock, flags);
 	/* Enable and configure */
@@ -227,7 +227,7 @@
 	if (fixup->base == NULL)
 		return;
 
-	DBG("shutdown_ht_interrupt(%u, %u)\n", source, irqflags);
+	DBG("shutdown_ht_interrupt(0x%x, 0x%x)\n", source, irqflags);
 
 	/* Disable */
 	spin_lock_irqsave(&mpic->fixup_lock, flags);
@@ -337,6 +337,17 @@
 	}
 }
 
+#else /* CONFIG_MPIC_BROKEN_U3 */
+
+static inline int mpic_is_ht_interrupt(struct mpic *mpic, unsigned int source)
+{
+	return 0;
+}
+
+static void __init mpic_scan_ht_pics(struct mpic *mpic)
+{
+}
+
 #endif /* CONFIG_MPIC_BROKEN_U3 */
 
 
@@ -405,11 +416,9 @@
 	unsigned int loops = 100000;
 	struct mpic *mpic = mpic_from_irq(irq);
 	unsigned int src = mpic_irq_to_hw(irq);
-	unsigned long flags;
 
 	DBG("%p: %s: enable_irq: %d (src %d)\n", mpic, mpic->name, irq, src);
 
-	spin_lock_irqsave(&mpic_lock, flags);
 	mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI,
 		       mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) &
 		       ~MPIC_VECPRI_MASK);
@@ -420,7 +429,6 @@
 			break;
 		}
 	} while(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK);
-	spin_unlock_irqrestore(&mpic_lock, flags);
 }
 
 static void mpic_mask_irq(unsigned int irq)
@@ -428,11 +436,9 @@
 	unsigned int loops = 100000;
 	struct mpic *mpic = mpic_from_irq(irq);
 	unsigned int src = mpic_irq_to_hw(irq);
-	unsigned long flags;
 
 	DBG("%s: disable_irq: %d (src %d)\n", mpic->name, irq, src);
 
-	spin_lock_irqsave(&mpic_lock, flags);
 	mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI,
 		       mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) |
 		       MPIC_VECPRI_MASK);
@@ -444,7 +450,6 @@
 			break;
 		}
 	} while(!(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK));
-	spin_unlock_irqrestore(&mpic_lock, flags);
 }
 
 static void mpic_end_irq(unsigned int irq)
@@ -512,8 +517,7 @@
 		mpic_ht_end_irq(mpic, src);
 	mpic_eoi(mpic);
 }
-
-#endif /* CONFIG_MPIC_BROKEN_U3 */
+#endif /* !CONFIG_MPIC_BROKEN_U3 */
 
 #ifdef CONFIG_SMP
 
@@ -560,47 +564,74 @@
 		       mpic_physmask(cpus_addr(tmp)[0]));	
 }
 
-static unsigned int mpic_flags_to_vecpri(unsigned int flags, int *level)
+static unsigned int mpic_type_to_vecpri(unsigned int type)
 {
-	unsigned int vecpri;
-
 	/* Now convert sense value */
-	switch(flags & IRQ_TYPE_SENSE_MASK) {
+	switch(type & IRQ_TYPE_SENSE_MASK) {
 	case IRQ_TYPE_EDGE_RISING:
-		vecpri = MPIC_VECPRI_SENSE_EDGE |
-			MPIC_VECPRI_POLARITY_POSITIVE;
-		*level = 0;
-		break;
+		return MPIC_VECPRI_SENSE_EDGE | MPIC_VECPRI_POLARITY_POSITIVE;
 	case IRQ_TYPE_EDGE_FALLING:
-		vecpri = MPIC_VECPRI_SENSE_EDGE |
-			MPIC_VECPRI_POLARITY_NEGATIVE;
-		*level = 0;
-		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		return MPIC_VECPRI_SENSE_EDGE | MPIC_VECPRI_POLARITY_NEGATIVE;
 	case IRQ_TYPE_LEVEL_HIGH:
-		vecpri = MPIC_VECPRI_SENSE_LEVEL |
-			MPIC_VECPRI_POLARITY_POSITIVE;
-		*level = 1;
-		break;
+		return MPIC_VECPRI_SENSE_LEVEL | MPIC_VECPRI_POLARITY_POSITIVE;
 	case IRQ_TYPE_LEVEL_LOW:
 	default:
-		vecpri = MPIC_VECPRI_SENSE_LEVEL |
-			MPIC_VECPRI_POLARITY_NEGATIVE;
-		*level = 1;
+		return MPIC_VECPRI_SENSE_LEVEL | MPIC_VECPRI_POLARITY_NEGATIVE;
 	}
-	return vecpri;
+}
+
+static int mpic_set_irq_type(unsigned int virq, unsigned int flow_type)
+{
+	struct mpic *mpic = mpic_from_irq(virq);
+	unsigned int src = mpic_irq_to_hw(virq);
+	struct irq_desc *desc = get_irq_desc(virq);
+	unsigned int vecpri, vold, vnew;
+
+	DBG("mpic: set_irq_type(mpic:@%p,virq:%d,src:0x%x,type:0x%x)\n",
+	    mpic, virq, src, flow_type);
+
+	if (src >= mpic->irq_count)
+		return -EINVAL;
+
+	if (flow_type == IRQ_TYPE_NONE)
+		if (mpic->senses && src < mpic->senses_count)
+			flow_type = mpic->senses[src];
+	if (flow_type == IRQ_TYPE_NONE)
+		flow_type = IRQ_TYPE_LEVEL_LOW;
+
+	desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+	desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
+	if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
+		desc->status |= IRQ_LEVEL;
+
+	if (mpic_is_ht_interrupt(mpic, src))
+		vecpri = MPIC_VECPRI_POLARITY_POSITIVE |
+			MPIC_VECPRI_SENSE_EDGE;
+	else
+		vecpri = mpic_type_to_vecpri(flow_type);
+
+	vold = mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI);
+	vnew = vold & ~(MPIC_VECPRI_POLARITY_MASK | MPIC_VECPRI_SENSE_MASK);
+	vnew |= vecpri;
+	if (vold != vnew)
+		mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI, vnew);
+
+	return 0;
 }
 
 static struct irq_chip mpic_irq_chip = {
-	.mask	= mpic_mask_irq,
-	.unmask	= mpic_unmask_irq,
-	.eoi	= mpic_end_irq,
+	.mask		= mpic_mask_irq,
+	.unmask		= mpic_unmask_irq,
+	.eoi		= mpic_end_irq,
+	.set_type	= mpic_set_irq_type,
 };
 
 #ifdef CONFIG_SMP
 static struct irq_chip mpic_ipi_chip = {
-	.mask	= mpic_mask_ipi,
-	.unmask	= mpic_unmask_ipi,
-	.eoi	= mpic_end_ipi,
+	.mask		= mpic_mask_ipi,
+	.unmask		= mpic_unmask_ipi,
+	.eoi		= mpic_end_ipi,
 };
 #endif /* CONFIG_SMP */
 
@@ -611,6 +642,7 @@
 	.mask		= mpic_mask_irq,
 	.unmask		= mpic_unmask_ht_irq,
 	.eoi		= mpic_end_ht_irq,
+	.set_type	= mpic_set_irq_type,
 };
 #endif /* CONFIG_MPIC_BROKEN_U3 */
 
@@ -624,26 +656,21 @@
 }
 
 static int mpic_host_map(struct irq_host *h, unsigned int virq,
-			 irq_hw_number_t hw, unsigned int flags)
+			 irq_hw_number_t hw)
 {
-	struct irq_desc *desc = get_irq_desc(virq);
-	struct irq_chip *chip;
 	struct mpic *mpic = h->host_data;
-	u32 v, vecpri = MPIC_VECPRI_SENSE_LEVEL |
-		MPIC_VECPRI_POLARITY_NEGATIVE;
-	int level;
-	unsigned long iflags;
+	struct irq_chip *chip;
 
-	pr_debug("mpic: map virq %d, hwirq 0x%lx, flags: 0x%x\n",
-		 virq, hw, flags);
+	DBG("mpic: map virq %d, hwirq 0x%lx\n", virq, hw);
 
 	if (hw == MPIC_VEC_SPURRIOUS)
 		return -EINVAL;
+
 #ifdef CONFIG_SMP
 	else if (hw >= MPIC_VEC_IPI_0) {
 		WARN_ON(!(mpic->flags & MPIC_PRIMARY));
 
-		pr_debug("mpic: mapping as IPI\n");
+		DBG("mpic: mapping as IPI\n");
 		set_irq_chip_data(virq, mpic);
 		set_irq_chip_and_handler(virq, &mpic->hc_ipi,
 					 handle_percpu_irq);
@@ -654,44 +681,23 @@
 	if (hw >= mpic->irq_count)
 		return -EINVAL;
 
-	/* If no sense provided, check default sense array */
-	if (((flags & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_NONE) &&
-	    mpic->senses && hw < mpic->senses_count)
-		flags |= mpic->senses[hw];
-
-	vecpri = mpic_flags_to_vecpri(flags, &level);
-	if (level)
-		desc->status |= IRQ_LEVEL;
+	/* Default chip */
 	chip = &mpic->hc_irq;
 
 #ifdef CONFIG_MPIC_BROKEN_U3
 	/* Check for HT interrupts, override vecpri */
-	if (mpic_is_ht_interrupt(mpic, hw)) {
-		vecpri &= ~(MPIC_VECPRI_SENSE_MASK |
-			    MPIC_VECPRI_POLARITY_MASK);
-		vecpri |= MPIC_VECPRI_POLARITY_POSITIVE;
+	if (mpic_is_ht_interrupt(mpic, hw))
 		chip = &mpic->hc_ht_irq;
-	}
-#endif
-
-	/* Reconfigure irq. We must preserve the mask bit as we can be called
-	 * while the interrupt is still active (This may change in the future
-	 * but for now, it is the case).
-	 */
-	spin_lock_irqsave(&mpic_lock, iflags);
-	v = mpic_irq_read(hw, MPIC_IRQ_VECTOR_PRI);
-	vecpri = (v &
-		~(MPIC_VECPRI_POLARITY_MASK | MPIC_VECPRI_SENSE_MASK)) |
-		vecpri;
-	if (vecpri != v)
-		mpic_irq_write(hw, MPIC_IRQ_VECTOR_PRI, vecpri);
-	spin_unlock_irqrestore(&mpic_lock, iflags);
+#endif /* CONFIG_MPIC_BROKEN_U3 */
 
-	pr_debug("mpic: mapping as IRQ, vecpri = 0x%08x (was 0x%08x)\n",
-		 vecpri, v);
+	DBG("mpic: mapping to irq chip @%p\n", chip);
 
 	set_irq_chip_data(virq, mpic);
 	set_irq_chip_and_handler(virq, chip, handle_fasteoi_irq);
+
+	/* Set default irq type */
+	set_irq_type(virq, IRQ_TYPE_NONE);
+
 	return 0;
 }
 
@@ -708,11 +714,28 @@
 	};
 
 	*out_hwirq = intspec[0];
-	if (intsize > 1 && intspec[1] < 4)
-		*out_flags = map_mpic_senses[intspec[1]];
-	else
+	if (intsize > 1) {
+		u32 mask = 0x3;
+
+		/* Apple invented a new race of encoding on machines with
+		 * an HT APIC. They encode, among others, the index within
+		 * the HT APIC. We don't care about it here since thankfully,
+		 * it appears that they have the APIC already properly
+		 * configured, and thus our current fixup code that reads the
+		 * APIC config works fine. However, we still need to mask out
+		 * bits in the specifier to make sure we only get bit 0 which
+		 * is the level/edge bit (the only sense bit exposed by Apple),
+		 * as their bit 1 means something else.
+		 */
+		if (machine_is(powermac))
+			mask = 0x1;
+		*out_flags = map_mpic_senses[intspec[1] & mask];
+	} else
 		*out_flags = IRQ_TYPE_NONE;
 
+	DBG("mpic: xlate (%d cells: 0x%08x 0x%08x) to line 0x%lx sense 0x%x\n",
+	    intsize, intspec[0], intspec[1], *out_hwirq, *out_flags);
+
 	return 0;
 }
 
@@ -906,41 +929,16 @@
 	if (mpic->irq_count == 0)
 		mpic->irq_count = mpic->num_sources;
 
-#ifdef CONFIG_MPIC_BROKEN_U3
 	/* Do the HT PIC fixups on U3 broken mpic */
 	DBG("MPIC flags: %x\n", mpic->flags);
 	if ((mpic->flags & MPIC_BROKEN_U3) && (mpic->flags & MPIC_PRIMARY))
  		mpic_scan_ht_pics(mpic);
-#endif /* CONFIG_MPIC_BROKEN_U3 */
 
 	for (i = 0; i < mpic->num_sources; i++) {
 		/* start with vector = source number, and masked */
-		u32 vecpri = MPIC_VECPRI_MASK | i | (8 << MPIC_VECPRI_PRIORITY_SHIFT);
-		int level = 1;
+		u32 vecpri = MPIC_VECPRI_MASK | i |
+			(8 << MPIC_VECPRI_PRIORITY_SHIFT);
 		
-		/* do senses munging */
-		if (mpic->senses && i < mpic->senses_count)
-			vecpri |= mpic_flags_to_vecpri(mpic->senses[i],
-						       &level);
-		else
-			vecpri |= MPIC_VECPRI_SENSE_LEVEL;
-
-		/* deal with broken U3 */
-		if (mpic->flags & MPIC_BROKEN_U3) {
-#ifdef CONFIG_MPIC_BROKEN_U3
-			if (mpic_is_ht_interrupt(mpic, i)) {
-				vecpri &= ~(MPIC_VECPRI_SENSE_MASK |
-					    MPIC_VECPRI_POLARITY_MASK);
-				vecpri |= MPIC_VECPRI_POLARITY_POSITIVE;
-			}
-#else
-			printk(KERN_ERR "mpic: BROKEN_U3 set, but CONFIG doesn't match\n");
-#endif
-		}
-
-		DBG("setup source %d, vecpri: %08x, level: %d\n", i, vecpri,
-		    (level != 0));
-
 		/* init hw */
 		mpic_irq_write(i, MPIC_IRQ_VECTOR_PRI, vecpri);
 		mpic_irq_write(i, MPIC_IRQ_DESTINATION,
@@ -1154,7 +1152,7 @@
 
 	for (i = 0; i < 4; i++) {
 		unsigned int vipi = irq_create_mapping(mpic->irqhost,
-						       MPIC_VEC_IPI_0 + i, 0);
+						       MPIC_VEC_IPI_0 + i);
 		if (vipi == NO_IRQ) {
 			printk(KERN_ERR "Failed to map IPI %d\n", i);
 			break;
diff -urN linux-2.6.18-rc1/arch/ppc/kernel/ppc_ksyms.c linux-2.6.18-rc2/arch/ppc/kernel/ppc_ksyms.c
--- linux-2.6.18-rc1/arch/ppc/kernel/ppc_ksyms.c	2006-07-15 22:34:41.788911901 +0000
+++ linux-2.6.18-rc2/arch/ppc/kernel/ppc_ksyms.c	2006-07-15 22:34:46.993476848 +0000
@@ -5,7 +5,7 @@
 #include <linux/elfcore.h>
 #include <linux/string.h>
 #include <linux/interrupt.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/vt_kern.h>
 #include <linux/nvram.h>
 #include <linux/console.h>
diff -urN linux-2.6.18-rc1/arch/ppc/kernel/setup.c linux-2.6.18-rc2/arch/ppc/kernel/setup.c
--- linux-2.6.18-rc1/arch/ppc/kernel/setup.c	2006-07-15 22:34:41.788911901 +0000
+++ linux-2.6.18-rc2/arch/ppc/kernel/setup.c	2006-07-15 22:34:46.993476848 +0000
@@ -11,7 +11,7 @@
 #include <linux/delay.h>
 #include <linux/initrd.h>
 #include <linux/ide.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/bootmem.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
diff -urN linux-2.6.18-rc1/arch/ppc/platforms/prep_setup.c linux-2.6.18-rc2/arch/ppc/platforms/prep_setup.c
--- linux-2.6.18-rc1/arch/ppc/platforms/prep_setup.c	2006-07-15 22:34:41.804913638 +0000
+++ linux-2.6.18-rc2/arch/ppc/platforms/prep_setup.c	2006-07-15 22:34:47.013479019 +0000
@@ -23,7 +23,7 @@
 #include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/a.out.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/major.h>
 #include <linux/interrupt.h>
 #include <linux/reboot.h>
diff -urN linux-2.6.18-rc1/arch/s390/Kconfig linux-2.6.18-rc2/arch/s390/Kconfig
--- linux-2.6.18-rc1/arch/s390/Kconfig	2006-07-15 22:34:41.812914507 +0000
+++ linux-2.6.18-rc2/arch/s390/Kconfig	2006-07-15 22:34:47.033481190 +0000
@@ -118,13 +118,6 @@
 	depends on COMPAT && SYSVIPC
 	default y
 
-config BINFMT_ELF32
-	tristate "Kernel support for 31 bit ELF binaries"
-	depends on COMPAT
-	help
-	  This allows you to run 32-bit Linux/ELF binaries on your zSeries
-	  in 64 bit mode. Everybody wants this; say Y.
-
 comment "Code generation options"
 
 choice
diff -urN linux-2.6.18-rc1/arch/s390/hypfs/hypfs_diag.c linux-2.6.18-rc2/arch/s390/hypfs/hypfs_diag.c
--- linux-2.6.18-rc1/arch/s390/hypfs/hypfs_diag.c	2006-07-15 22:34:41.816914941 +0000
+++ linux-2.6.18-rc2/arch/s390/hypfs/hypfs_diag.c	2006-07-15 22:34:47.033481190 +0000
@@ -403,7 +403,7 @@
 		*pages = 1;
 		return diag204_alloc_rbuf();
 	} else {/* INFO_EXT */
-		*pages = diag204(SUBC_RSI | INFO_EXT, 0, 0);
+		*pages = diag204(SUBC_RSI | INFO_EXT, 0, NULL);
 		if (*pages <= 0)
 			return ERR_PTR(-ENOSYS);
 		else
diff -urN linux-2.6.18-rc1/arch/s390/kernel/Makefile linux-2.6.18-rc2/arch/s390/kernel/Makefile
--- linux-2.6.18-rc1/arch/s390/kernel/Makefile	2006-07-15 22:34:41.816914941 +0000
+++ linux-2.6.18-rc2/arch/s390/kernel/Makefile	2006-07-15 22:34:47.037481624 +0000
@@ -17,8 +17,8 @@
 obj-$(CONFIG_SMP)		+= smp.o
 
 obj-$(CONFIG_COMPAT)		+= compat_linux.o compat_signal.o \
-					compat_wrapper.o compat_exec_domain.o
-obj-$(CONFIG_BINFMT_ELF32)	+= binfmt_elf32.o
+					compat_wrapper.o compat_exec_domain.o \
+					binfmt_elf32.o
 
 obj-$(CONFIG_VIRT_TIMER)	+= vtime.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
diff -urN linux-2.6.18-rc1/arch/s390/kernel/compat_linux.c linux-2.6.18-rc2/arch/s390/kernel/compat_linux.c
--- linux-2.6.18-rc1/arch/s390/kernel/compat_linux.c	2006-07-15 22:34:41.816914941 +0000
+++ linux-2.6.18-rc2/arch/s390/kernel/compat_linux.c	2006-07-15 22:34:47.037481624 +0000
@@ -409,7 +409,7 @@
 	mm_segment_t old_fs = get_fs ();
 	
 	set_fs (KERNEL_DS);
-	ret = sys_sysinfo(&s);
+	ret = sys_sysinfo((struct sysinfo __user *) &s);
 	set_fs (old_fs);
 	err = put_user (s.uptime, &info->uptime);
 	err |= __put_user (s.loads[0], &info->loads[0]);
@@ -438,7 +438,7 @@
 	mm_segment_t old_fs = get_fs ();
 	
 	set_fs (KERNEL_DS);
-	ret = sys_sched_rr_get_interval(pid, &t);
+	ret = sys_sched_rr_get_interval(pid, (struct timespec __user *) &t);
 	set_fs (old_fs);
 	if (put_compat_timespec(&t, interval))
 		return -EFAULT;
@@ -464,7 +464,10 @@
 		}
 	}
 	set_fs (KERNEL_DS);
-	ret = sys_rt_sigprocmask(how, set ? &s : NULL, oset ? &s : NULL, sigsetsize);
+	ret = sys_rt_sigprocmask(how,
+				 set ? (sigset_t __user *) &s : NULL,
+				 oset ? (sigset_t __user *) &s : NULL,
+				 sigsetsize);
 	set_fs (old_fs);
 	if (ret) return ret;
 	if (oset) {
@@ -489,7 +492,7 @@
 	mm_segment_t old_fs = get_fs();
 		
 	set_fs (KERNEL_DS);
-	ret = sys_rt_sigpending(&s, sigsetsize);
+	ret = sys_rt_sigpending((sigset_t __user *) &s, sigsetsize);
 	set_fs (old_fs);
 	if (!ret) {
 		switch (_NSIG_WORDS) {
@@ -514,7 +517,7 @@
 	if (copy_siginfo_from_user32(&info, uinfo))
 		return -EFAULT;
 	set_fs (KERNEL_DS);
-	ret = sys_rt_sigqueueinfo(pid, sig, &info);
+	ret = sys_rt_sigqueueinfo(pid, sig, (siginfo_t __user *) &info);
 	set_fs (old_fs);
 	return ret;
 }
@@ -674,7 +677,8 @@
 		return -EFAULT;
 		
 	set_fs(KERNEL_DS);
-	ret = sys_sendfile(out_fd, in_fd, offset ? &of : NULL, count);
+	ret = sys_sendfile(out_fd, in_fd,
+			   offset ? (off_t __user *) &of : NULL, count);
 	set_fs(old_fs);
 	
 	if (offset && put_user(of, offset))
@@ -694,7 +698,8 @@
 		return -EFAULT;
 		
 	set_fs(KERNEL_DS);
-	ret = sys_sendfile64(out_fd, in_fd, offset ? &lof : NULL, count);
+	ret = sys_sendfile64(out_fd, in_fd,
+			     offset ? (loff_t __user *) &lof : NULL, count);
 	set_fs(old_fs);
 	
 	if (offset && put_user(lof, offset))
diff -urN linux-2.6.18-rc1/arch/s390/kernel/machine_kexec.c linux-2.6.18-rc2/arch/s390/kernel/machine_kexec.c
--- linux-2.6.18-rc1/arch/s390/kernel/machine_kexec.c	2006-07-15 22:34:41.820915375 +0000
+++ linux-2.6.18-rc2/arch/s390/kernel/machine_kexec.c	2006-07-15 22:34:47.041482058 +0000
@@ -63,6 +63,7 @@
 machine_kexec(struct kimage *image)
 {
 	clear_all_subchannels();
+	cio_reset_channel_paths();
 
 	/* Disable lowcore protection */
 	ctl_clear_bit(0,28);
diff -urN linux-2.6.18-rc1/arch/s390/kernel/module.c linux-2.6.18-rc2/arch/s390/kernel/module.c
--- linux-2.6.18-rc1/arch/s390/kernel/module.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/s390/kernel/module.c	2006-07-15 22:34:47.041482058 +0000
@@ -119,7 +119,7 @@
 	int nrela, i, j;
 
 	/* Find symbol table and string table. */
-	symtab = 0;
+	symtab = NULL;
 	for (i = 0; i < hdr->e_shnum; i++)
 		switch (sechdrs[i].sh_type) {
 		case SHT_SYMTAB:
diff -urN linux-2.6.18-rc1/arch/s390/kernel/process.c linux-2.6.18-rc2/arch/s390/kernel/process.c
--- linux-2.6.18-rc1/arch/s390/kernel/process.c	2006-07-15 22:34:41.820915375 +0000
+++ linux-2.6.18-rc2/arch/s390/kernel/process.c	2006-07-15 22:34:47.041482058 +0000
@@ -172,7 +172,7 @@
 	show_registers(regs);
 	/* Show stack backtrace if pt_regs is from kernel mode */
 	if (!(regs->psw.mask & PSW_MASK_PSTATE))
-		show_trace(0,(unsigned long *) regs->gprs[15]);
+		show_trace(NULL, (unsigned long *) regs->gprs[15]);
 }
 
 extern void kernel_thread_starter(void);
diff -urN linux-2.6.18-rc1/arch/s390/kernel/profile.c linux-2.6.18-rc2/arch/s390/kernel/profile.c
--- linux-2.6.18-rc1/arch/s390/kernel/profile.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/s390/kernel/profile.c	2006-07-15 22:34:47.041482058 +0000
@@ -13,7 +13,7 @@
 void init_irq_proc(void)
 {
 	/* create /proc/irq */
-	root_irq_dir = proc_mkdir("irq", 0);
+	root_irq_dir = proc_mkdir("irq", NULL);
 
 	/* create /proc/irq/prof_cpu_mask */
 	create_prof_cpu_mask(root_irq_dir);
diff -urN linux-2.6.18-rc1/arch/s390/kernel/s390_ext.c linux-2.6.18-rc2/arch/s390/kernel/s390_ext.c
--- linux-2.6.18-rc1/arch/s390/kernel/s390_ext.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/s390/kernel/s390_ext.c	2006-07-15 22:34:47.041482058 +0000
@@ -24,7 +24,7 @@
  * (0x1202 external call, 0x1004 cpu timer, 0x2401 hwc console, 0x4000
  * iucv and 0x2603 pfault) this is always the first element. 
  */
-ext_int_info_t *ext_int_hash[256] = { 0, };
+ext_int_info_t *ext_int_hash[256] = { NULL, };
 
 static inline int ext_hash(__u16 code)
 {
diff -urN linux-2.6.18-rc1/arch/s390/kernel/time.c linux-2.6.18-rc2/arch/s390/kernel/time.c
--- linux-2.6.18-rc1/arch/s390/kernel/time.c	2006-07-15 22:34:41.824915809 +0000
+++ linux-2.6.18-rc2/arch/s390/kernel/time.c	2006-07-15 22:34:47.041482058 +0000
@@ -379,7 +379,7 @@
                                 -xtime.tv_sec, -xtime.tv_nsec);
 
 	/* request the clock comparator external interrupt */
-        if (register_early_external_interrupt(0x1004, 0,
+	if (register_early_external_interrupt(0x1004, NULL,
 					      &ext_int_info_cc) != 0)
                 panic("Couldn't request external interrupt 0x1004");
 
diff -urN linux-2.6.18-rc1/arch/s390/kernel/traps.c linux-2.6.18-rc2/arch/s390/kernel/traps.c
--- linux-2.6.18-rc1/arch/s390/kernel/traps.c	2006-07-15 22:34:41.824915809 +0000
+++ linux-2.6.18-rc2/arch/s390/kernel/traps.c	2006-07-15 22:34:47.041482058 +0000
@@ -170,7 +170,7 @@
  */
 void dump_stack(void)
 {
-	show_stack(0, 0);
+	show_stack(NULL, NULL);
 }
 
 EXPORT_SYMBOL(dump_stack);
@@ -331,9 +331,9 @@
         }
 }
 
-static inline void *get_check_address(struct pt_regs *regs)
+static inline void __user *get_check_address(struct pt_regs *regs)
 {
-	return (void *)((regs->psw.addr-S390_lowcore.pgm_ilc) & PSW_ADDR_INSN);
+	return (void __user *)((regs->psw.addr-S390_lowcore.pgm_ilc) & PSW_ADDR_INSN);
 }
 
 void do_single_step(struct pt_regs *regs)
@@ -360,7 +360,7 @@
         info.si_signo = signr; \
         info.si_errno = 0; \
         info.si_code = sicode; \
-        info.si_addr = (void *)siaddr; \
+	info.si_addr = siaddr; \
         do_trap(interruption_code, signr, str, regs, &info); \
 }
 
@@ -392,7 +392,7 @@
 	      ILL_ILLOPN, get_check_address(regs))
 
 static inline void
-do_fp_trap(struct pt_regs *regs, void *location,
+do_fp_trap(struct pt_regs *regs, void __user *location,
            int fpc, long interruption_code)
 {
 	siginfo_t si;
@@ -424,10 +424,10 @@
 {
 	siginfo_t info;
         __u8 opcode[6];
-	__u16 *location;
+	__u16 __user *location;
 	int signal = 0;
 
-	location = (__u16 *) get_check_address(regs);
+	location = get_check_address(regs);
 
 	/*
 	 * We got all needed information from the lowcore and can
@@ -559,10 +559,10 @@
 
 asmlinkage void data_exception(struct pt_regs * regs, long interruption_code)
 {
-	__u16 *location;
+	__u16 __user *location;
 	int signal = 0;
 
-	location = (__u16 *) get_check_address(regs);
+	location = get_check_address(regs);
 
 	/*
 	 * We got all needed information from the lowcore and can
diff -urN linux-2.6.18-rc1/arch/s390/lib/string.c linux-2.6.18-rc2/arch/s390/lib/string.c
--- linux-2.6.18-rc1/arch/s390/lib/string.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/s390/lib/string.c	2006-07-15 22:34:47.045482493 +0000
@@ -233,7 +233,7 @@
 		       if (s[len] == (char) c)
 			       return (char *) s + len;
 	       } while (--len > 0);
-       return 0;
+       return NULL;
 }
 EXPORT_SYMBOL(strrchr);
 
@@ -267,7 +267,7 @@
 			return (char *) s1;
 		s1++;
 	}
-	return 0;
+	return NULL;
 }
 EXPORT_SYMBOL(strstr);
 
diff -urN linux-2.6.18-rc1/arch/s390/mm/cmm.c linux-2.6.18-rc2/arch/s390/mm/cmm.c
--- linux-2.6.18-rc1/arch/s390/mm/cmm.c	2006-07-15 22:34:41.824915809 +0000
+++ linux-2.6.18-rc2/arch/s390/mm/cmm.c	2006-07-15 22:34:47.045482493 +0000
@@ -161,7 +161,7 @@
 static void
 cmm_start_thread(void)
 {
-	kernel_thread(cmm_thread, 0, 0);
+	kernel_thread(cmm_thread, NULL, 0);
 }
 
 static void
diff -urN linux-2.6.18-rc1/arch/s390/mm/fault.c linux-2.6.18-rc2/arch/s390/mm/fault.c
--- linux-2.6.18-rc1/arch/s390/mm/fault.c	2006-07-15 22:34:41.824915809 +0000
+++ linux-2.6.18-rc2/arch/s390/mm/fault.c	2006-07-15 22:34:47.045482493 +0000
@@ -144,7 +144,7 @@
 #endif
 	si.si_signo = SIGSEGV;
 	si.si_code = si_code;
-	si.si_addr = (void *) address;
+	si.si_addr = (void __user *) address;
 	force_sig_info(SIGSEGV, &si, current);
 }
 
diff -urN linux-2.6.18-rc1/arch/sh/kernel/setup.c linux-2.6.18-rc2/arch/sh/kernel/setup.c
--- linux-2.6.18-rc1/arch/sh/kernel/setup.c	2006-07-15 22:34:41.836917112 +0000
+++ linux-2.6.18-rc2/arch/sh/kernel/setup.c	2006-07-15 22:34:47.061484230 +0000
@@ -10,7 +10,7 @@
  * This file handles the architecture-dependent parts of initialization
  */
 
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/initrd.h>
diff -urN linux-2.6.18-rc1/arch/sh64/kernel/setup.c linux-2.6.18-rc2/arch/sh64/kernel/setup.c
--- linux-2.6.18-rc1/arch/sh64/kernel/setup.c	2006-07-15 22:34:41.844917981 +0000
+++ linux-2.6.18-rc2/arch/sh64/kernel/setup.c	2006-07-15 22:34:47.065484664 +0000
@@ -36,7 +36,7 @@
 #include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/a.out.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
 #include <linux/init.h>
diff -urN linux-2.6.18-rc1/arch/sh64/kernel/sh_ksyms.c linux-2.6.18-rc2/arch/sh64/kernel/sh_ksyms.c
--- linux-2.6.18-rc1/arch/sh64/kernel/sh_ksyms.c	2006-07-15 22:34:41.844917981 +0000
+++ linux-2.6.18-rc2/arch/sh64/kernel/sh_ksyms.c	2006-07-15 22:34:47.069485098 +0000
@@ -18,7 +18,7 @@
 #include <linux/in6.h>
 #include <linux/interrupt.h>
 #include <linux/smp_lock.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 
 #include <asm/semaphore.h>
 #include <asm/processor.h>
diff -urN linux-2.6.18-rc1/arch/sparc/kernel/of_device.c linux-2.6.18-rc2/arch/sparc/kernel/of_device.c
--- linux-2.6.18-rc1/arch/sparc/kernel/of_device.c	2006-07-15 22:34:41.848918415 +0000
+++ linux-2.6.18-rc2/arch/sparc/kernel/of_device.c	2006-07-15 22:34:47.073485532 +0000
@@ -183,7 +183,7 @@
 };
 EXPORT_SYMBOL(of_bus_type);
 
-static inline u64 of_read_addr(u32 *cell, int size)
+static inline u64 of_read_addr(const u32 *cell, int size)
 {
 	u64 r = 0;
 	while (size--)
@@ -209,8 +209,8 @@
 	int		(*match)(struct device_node *parent);
 	void		(*count_cells)(struct device_node *child,
 				       int *addrc, int *sizec);
-	u64		(*map)(u32 *addr, u32 *range, int na, int ns, int pna);
-	int		(*translate)(u32 *addr, u64 offset, int na);
+	int		(*map)(u32 *addr, const u32 *range,
+			       int na, int ns, int pna);
 	unsigned int	(*get_flags)(u32 *addr);
 };
 
@@ -224,27 +224,49 @@
 	get_cells(dev, addrc, sizec);
 }
 
-static u64 of_bus_default_map(u32 *addr, u32 *range, int na, int ns, int pna)
+/* Make sure the least significant 64-bits are in-range.  Even
+ * for 3 or 4 cell values it is a good enough approximation.
+ */
+static int of_out_of_range(const u32 *addr, const u32 *base,
+			   const u32 *size, int na, int ns)
 {
-	u64 cp, s, da;
+	u64 a = of_read_addr(addr, na);
+	u64 b = of_read_addr(base, na);
+
+	if (a < b)
+		return 1;
 
-	cp = of_read_addr(range, na);
-	s  = of_read_addr(range + na + pna, ns);
-	da = of_read_addr(addr, na);
+	b += of_read_addr(size, ns);
+	if (a >= b)
+		return 1;
 
-	if (da < cp || da >= (cp + s))
-		return OF_BAD_ADDR;
-	return da - cp;
+	return 0;
 }
 
-static int of_bus_default_translate(u32 *addr, u64 offset, int na)
+static int of_bus_default_map(u32 *addr, const u32 *range,
+			      int na, int ns, int pna)
 {
-	u64 a = of_read_addr(addr, na);
-	memset(addr, 0, na * 4);
-	a += offset;
-	if (na > 1)
-		addr[na - 2] = a >> 32;
-	addr[na - 1] = a & 0xffffffffu;
+	u32 result[OF_MAX_ADDR_CELLS];
+	int i;
+
+	if (ns > 2) {
+		printk("of_device: Cannot handle size cells (%d) > 2.", ns);
+		return -EINVAL;
+	}
+
+	if (of_out_of_range(addr, range, range + na + pna, na, ns))
+		return -EINVAL;
+
+	/* Start with the parent range base.  */
+	memcpy(result, range + na, pna * 4);
+
+	/* Add in the child address offset.  */
+	for (i = 0; i < na; i++)
+		result[pna - 1 - i] +=
+			(addr[na - 1 - i] -
+			 range[na - 1 - i]);
+
+	memcpy(addr, result, pna * 4);
 
 	return 0;
 }
@@ -254,14 +276,26 @@
 	return IORESOURCE_MEM;
 }
 
-
 /*
  * PCI bus specific translator
  */
 
 static int of_bus_pci_match(struct device_node *np)
 {
-	return !strcmp(np->type, "pci") || !strcmp(np->type, "pciex");
+	if (!strcmp(np->type, "pci") || !strcmp(np->type, "pciex")) {
+		/* Do not do PCI specific frobbing if the
+		 * PCI bridge lacks a ranges property.  We
+		 * want to pass it through up to the next
+		 * parent as-is, not with the PCI translate
+		 * method which chops off the top address cell.
+		 */
+		if (!of_find_property(np, "ranges", NULL))
+			return 0;
+
+		return 1;
+	}
+
+	return 0;
 }
 
 static void of_bus_pci_count_cells(struct device_node *np,
@@ -273,27 +307,32 @@
 		*sizec = 2;
 }
 
-static u64 of_bus_pci_map(u32 *addr, u32 *range, int na, int ns, int pna)
+static int of_bus_pci_map(u32 *addr, const u32 *range,
+			  int na, int ns, int pna)
 {
-	u64 cp, s, da;
+	u32 result[OF_MAX_ADDR_CELLS];
+	int i;
 
 	/* Check address type match */
 	if ((addr[0] ^ range[0]) & 0x03000000)
-		return OF_BAD_ADDR;
+		return -EINVAL;
 
-	/* Read address values, skipping high cell */
-	cp = of_read_addr(range + 1, na - 1);
-	s  = of_read_addr(range + na + pna, ns);
-	da = of_read_addr(addr + 1, na - 1);
+	if (of_out_of_range(addr + 1, range + 1, range + na + pna,
+			    na - 1, ns))
+		return -EINVAL;
+
+	/* Start with the parent range base.  */
+	memcpy(result, range + na, pna * 4);
+
+	/* Add in the child address offset, skipping high cell.  */
+	for (i = 0; i < na - 1; i++)
+		result[pna - 1 - i] +=
+			(addr[na - 1 - i] -
+			 range[na - 1 - i]);
 
-	if (da < cp || da >= (cp + s))
-		return OF_BAD_ADDR;
-	return da - cp;
-}
+	memcpy(addr, result, pna * 4);
 
-static int of_bus_pci_translate(u32 *addr, u64 offset, int na)
-{
-	return of_bus_default_translate(addr + 1, offset, na - 1);
+	return 0;
 }
 
 static unsigned int of_bus_pci_get_flags(u32 *addr)
@@ -332,16 +371,11 @@
 		*sizec = 1;
 }
 
-static u64 of_bus_sbus_map(u32 *addr, u32 *range, int na, int ns, int pna)
+static int of_bus_sbus_map(u32 *addr, const u32 *range, int na, int ns, int pna)
 {
 	return of_bus_default_map(addr, range, na, ns, pna);
 }
 
-static int of_bus_sbus_translate(u32 *addr, u64 offset, int na)
-{
-	return of_bus_default_translate(addr, offset, na);
-}
-
 static unsigned int of_bus_sbus_get_flags(u32 *addr)
 {
 	return IORESOURCE_MEM;
@@ -360,7 +394,6 @@
 		.match = of_bus_pci_match,
 		.count_cells = of_bus_pci_count_cells,
 		.map = of_bus_pci_map,
-		.translate = of_bus_pci_translate,
 		.get_flags = of_bus_pci_get_flags,
 	},
 	/* SBUS */
@@ -370,7 +403,6 @@
 		.match = of_bus_sbus_match,
 		.count_cells = of_bus_sbus_count_cells,
 		.map = of_bus_sbus_map,
-		.translate = of_bus_sbus_translate,
 		.get_flags = of_bus_sbus_get_flags,
 	},
 	/* Default */
@@ -380,7 +412,6 @@
 		.match = NULL,
 		.count_cells = of_bus_default_count_cells,
 		.map = of_bus_default_map,
-		.translate = of_bus_default_translate,
 		.get_flags = of_bus_default_get_flags,
 	},
 };
@@ -405,33 +436,34 @@
 	u32 *ranges;
 	unsigned int rlen;
 	int rone;
-	u64 offset = OF_BAD_ADDR;
 
 	ranges = of_get_property(parent, "ranges", &rlen);
 	if (ranges == NULL || rlen == 0) {
-		offset = of_read_addr(addr, na);
-		memset(addr, 0, pna * 4);
-		goto finish;
+		u32 result[OF_MAX_ADDR_CELLS];
+		int i;
+
+		memset(result, 0, pna * 4);
+		for (i = 0; i < na; i++)
+			result[pna - 1 - i] =
+				addr[na - 1 - i];
+
+		memcpy(addr, result, pna * 4);
+		return 0;
 	}
 
 	/* Now walk through the ranges */
 	rlen /= 4;
 	rone = na + pna + ns;
 	for (; rlen >= rone; rlen -= rone, ranges += rone) {
-		offset = bus->map(addr, ranges, na, ns, pna);
-		if (offset != OF_BAD_ADDR)
-			break;
+		if (!bus->map(addr, ranges, na, ns, pna))
+			return 0;
 	}
-	if (offset == OF_BAD_ADDR)
-		return 1;
-
-	memcpy(addr, ranges + na, 4 * pna);
 
-finish:
-	/* Translate it into parent bus space */
-	return pbus->translate(addr, offset, pna);
+	return 1;
 }
 
+static int of_resource_verbose;
+
 static void __init build_device_resources(struct of_device *op,
 					  struct device *parent)
 {
@@ -497,7 +529,8 @@
 			pbus = of_match_bus(pp);
 			pbus->count_cells(dp, &pna, &pns);
 
-			if (build_one_resource(dp, bus, pbus, addr, dna, dns, pna))
+			if (build_one_resource(dp, bus, pbus, addr,
+					       dna, dns, pna))
 				break;
 
 			dna = pna;
@@ -507,6 +540,12 @@
 
 	build_res:
 		memset(r, 0, sizeof(*r));
+
+		if (of_resource_verbose)
+			printk("%s reg[%d] -> %llx\n",
+			       op->node->full_name, index,
+			       result);
+
 		if (result != OF_BAD_ADDR) {
 			r->start = result & 0xffffffff;
 			r->end = result + size - 1;
@@ -643,6 +682,18 @@
 
 postcore_initcall(of_bus_driver_init);
 
+static int __init of_debug(char *str)
+{
+	int val = 0;
+
+	get_option(&str, &val);
+	if (val & 1)
+		of_resource_verbose = 1;
+	return 1;
+}
+
+__setup("of_debug=", of_debug);
+
 int of_register_driver(struct of_platform_driver *drv, struct bus_type *bus)
 {
 	/* initialize common driver fields */
@@ -695,9 +746,11 @@
 	if (rc)
 		return rc;
 
-	device_create_file(&ofdev->dev, &dev_attr_devspec);
+	rc = device_create_file(&ofdev->dev, &dev_attr_devspec);
+	if (rc)
+		device_unregister(&ofdev->dev);
 
-	return 0;
+	return rc;
 }
 
 void of_device_unregister(struct of_device *ofdev)
diff -urN linux-2.6.18-rc1/arch/sparc/kernel/setup.c linux-2.6.18-rc2/arch/sparc/kernel/setup.c
--- linux-2.6.18-rc1/arch/sparc/kernel/setup.c	2006-07-15 22:34:41.852918849 +0000
+++ linux-2.6.18-rc2/arch/sparc/kernel/setup.c	2006-07-15 22:34:47.077485967 +0000
@@ -17,7 +17,7 @@
 #include <asm/smp.h>
 #include <linux/user.h>
 #include <linux/a.out.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/delay.h>
 #include <linux/fs.h>
 #include <linux/seq_file.h>
diff -urN linux-2.6.18-rc1/arch/sparc64/Kconfig linux-2.6.18-rc2/arch/sparc64/Kconfig
--- linux-2.6.18-rc1/arch/sparc64/Kconfig	2006-07-15 22:34:41.856919283 +0000
+++ linux-2.6.18-rc2/arch/sparc64/Kconfig	2006-07-15 22:34:47.081486401 +0000
@@ -334,7 +334,7 @@
 	default y
 
 config BINFMT_ELF32
-	tristate "Kernel support for 32-bit ELF binaries"
+	bool "Kernel support for 32-bit ELF binaries"
 	depends on SPARC32_COMPAT
 	help
 	  This allows you to run 32-bit Linux/ELF binaries on your Ultra.
diff -urN linux-2.6.18-rc1/arch/sparc64/defconfig linux-2.6.18-rc2/arch/sparc64/defconfig
--- linux-2.6.18-rc1/arch/sparc64/defconfig	2006-07-15 22:34:41.856919283 +0000
+++ linux-2.6.18-rc2/arch/sparc64/defconfig	2006-07-15 22:34:47.085486835 +0000
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17
-# Fri Jun 23 23:17:09 2006
+# Linux kernel version: 2.6.18-rc1
+# Wed Jul 12 14:00:58 2006
 #
 CONFIG_SPARC=y
 CONFIG_SPARC64=y
@@ -18,6 +18,7 @@
 CONFIG_HZ_250=y
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -51,10 +52,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -127,8 +130,8 @@
 CONFIG_HAVE_MEMORY_PRESENT=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_MEMORY_HOTPLUG=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_SBUS=y
 CONFIG_SBUSCHAR=y
@@ -203,7 +206,6 @@
 CONFIG_TCP_CONG_SCALABLE=m
 CONFIG_TCP_CONG_LP=m
 CONFIG_TCP_CONG_VENO=m
-CONFIG_TCP_CONG_COMPOUND=m
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
@@ -461,9 +463,8 @@
 CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
+CONFIG_MD_RAID456=m
 # CONFIG_MD_RAID5_RESHAPE is not set
-CONFIG_MD_RAID6=m
 CONFIG_MD_MULTIPATH=m
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -663,6 +664,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -693,6 +695,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -839,12 +842,13 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_MACMODES is not set
-# CONFIG_FB_FIRMWARE_EDID is not set
+# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_CIRRUS is not set
@@ -954,6 +958,18 @@
 # CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1263,6 +1279,7 @@
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1331,14 +1348,19 @@
 #
 CONFIG_PRINTK_TIME=y
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=18
 CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHEDSTATS=y
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
@@ -1402,3 +1424,4 @@
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/sparc64/kernel/head.S linux-2.6.18-rc2/arch/sparc64/kernel/head.S
--- linux-2.6.18-rc1/arch/sparc64/kernel/head.S	2006-07-15 22:34:41.860919718 +0000
+++ linux-2.6.18-rc2/arch/sparc64/kernel/head.S	2006-07-15 22:34:47.089487269 +0000
@@ -551,9 +551,10 @@
 	save	%sp, -192, %sp
 
 	/* Force interrupts to be disabled. */
-	rdpr	%pstate, %o1
-	andn	%o1, PSTATE_IE, %o1
+	rdpr	%pstate, %l0
+	andn	%l0, PSTATE_IE, %o1
 	wrpr	%o1, 0x0, %pstate
+	rdpr	%pil, %l1
 	wrpr	%g0, 15, %pil
 
 	/* Make the firmware call to jump over to the Linux trap table.  */
@@ -622,11 +623,9 @@
 	call	init_irqwork_curcpu
 	 nop
 
-	/* Now we can turn interrupts back on. */
-	rdpr	%pstate, %o1
-	or	%o1, PSTATE_IE, %o1
-	wrpr	%o1, 0, %pstate
-	wrpr	%g0, 0x0, %pil
+	/* Now we can restore interrupt state. */
+	wrpr	%l0, 0, %pstate
+	wrpr	%l1, 0x0, %pil
 
 	ret
 	 restore
diff -urN linux-2.6.18-rc1/arch/sparc64/kernel/of_device.c linux-2.6.18-rc2/arch/sparc64/kernel/of_device.c
--- linux-2.6.18-rc1/arch/sparc64/kernel/of_device.c	2006-07-15 22:34:41.864920152 +0000
+++ linux-2.6.18-rc2/arch/sparc64/kernel/of_device.c	2006-07-15 22:34:47.089487269 +0000
@@ -210,7 +210,7 @@
 };
 EXPORT_SYMBOL(of_bus_type);
 
-static inline u64 of_read_addr(u32 *cell, int size)
+static inline u64 of_read_addr(const u32 *cell, int size)
 {
 	u64 r = 0;
 	while (size--)
@@ -236,8 +236,8 @@
 	int		(*match)(struct device_node *parent);
 	void		(*count_cells)(struct device_node *child,
 				       int *addrc, int *sizec);
-	u64		(*map)(u32 *addr, u32 *range, int na, int ns, int pna);
-	int		(*translate)(u32 *addr, u64 offset, int na);
+	int		(*map)(u32 *addr, const u32 *range,
+			       int na, int ns, int pna);
 	unsigned int	(*get_flags)(u32 *addr);
 };
 
@@ -251,27 +251,49 @@
 	get_cells(dev, addrc, sizec);
 }
 
-static u64 of_bus_default_map(u32 *addr, u32 *range, int na, int ns, int pna)
+/* Make sure the least significant 64-bits are in-range.  Even
+ * for 3 or 4 cell values it is a good enough approximation.
+ */
+static int of_out_of_range(const u32 *addr, const u32 *base,
+			   const u32 *size, int na, int ns)
 {
-	u64 cp, s, da;
+	u64 a = of_read_addr(addr, na);
+	u64 b = of_read_addr(base, na);
 
-	cp = of_read_addr(range, na);
-	s  = of_read_addr(range + na + pna, ns);
-	da = of_read_addr(addr, na);
+	if (a < b)
+		return 1;
 
-	if (da < cp || da >= (cp + s))
-		return OF_BAD_ADDR;
-	return da - cp;
+	b += of_read_addr(size, ns);
+	if (a >= b)
+		return 1;
+
+	return 0;
 }
 
-static int of_bus_default_translate(u32 *addr, u64 offset, int na)
+static int of_bus_default_map(u32 *addr, const u32 *range,
+			      int na, int ns, int pna)
 {
-	u64 a = of_read_addr(addr, na);
-	memset(addr, 0, na * 4);
-	a += offset;
-	if (na > 1)
-		addr[na - 2] = a >> 32;
-	addr[na - 1] = a & 0xffffffffu;
+	u32 result[OF_MAX_ADDR_CELLS];
+	int i;
+
+	if (ns > 2) {
+		printk("of_device: Cannot handle size cells (%d) > 2.", ns);
+		return -EINVAL;
+	}
+
+	if (of_out_of_range(addr, range, range + na + pna, na, ns))
+		return -EINVAL;
+
+	/* Start with the parent range base.  */
+	memcpy(result, range + na, pna * 4);
+
+	/* Add in the child address offset.  */
+	for (i = 0; i < na; i++)
+		result[pna - 1 - i] +=
+			(addr[na - 1 - i] -
+			 range[na - 1 - i]);
+
+	memcpy(addr, result, pna * 4);
 
 	return 0;
 }
@@ -287,7 +309,20 @@
 
 static int of_bus_pci_match(struct device_node *np)
 {
-	return !strcmp(np->type, "pci") || !strcmp(np->type, "pciex");
+	if (!strcmp(np->type, "pci") || !strcmp(np->type, "pciex")) {
+		/* Do not do PCI specific frobbing if the
+		 * PCI bridge lacks a ranges property.  We
+		 * want to pass it through up to the next
+		 * parent as-is, not with the PCI translate
+		 * method which chops off the top address cell.
+		 */
+		if (!of_find_property(np, "ranges", NULL))
+			return 0;
+
+		return 1;
+	}
+
+	return 0;
 }
 
 static void of_bus_pci_count_cells(struct device_node *np,
@@ -299,27 +334,32 @@
 		*sizec = 2;
 }
 
-static u64 of_bus_pci_map(u32 *addr, u32 *range, int na, int ns, int pna)
+static int of_bus_pci_map(u32 *addr, const u32 *range,
+			  int na, int ns, int pna)
 {
-	u64 cp, s, da;
+	u32 result[OF_MAX_ADDR_CELLS];
+	int i;
 
 	/* Check address type match */
 	if ((addr[0] ^ range[0]) & 0x03000000)
-		return OF_BAD_ADDR;
+		return -EINVAL;
 
-	/* Read address values, skipping high cell */
-	cp = of_read_addr(range + 1, na - 1);
-	s  = of_read_addr(range + na + pna, ns);
-	da = of_read_addr(addr + 1, na - 1);
+	if (of_out_of_range(addr + 1, range + 1, range + na + pna,
+			    na - 1, ns))
+		return -EINVAL;
+
+	/* Start with the parent range base.  */
+	memcpy(result, range + na, pna * 4);
+
+	/* Add in the child address offset, skipping high cell.  */
+	for (i = 0; i < na - 1; i++)
+		result[pna - 1 - i] +=
+			(addr[na - 1 - i] -
+			 range[na - 1 - i]);
 
-	if (da < cp || da >= (cp + s))
-		return OF_BAD_ADDR;
-	return da - cp;
-}
+	memcpy(addr, result, pna * 4);
 
-static int of_bus_pci_translate(u32 *addr, u64 offset, int na)
-{
-	return of_bus_default_translate(addr + 1, offset, na - 1);
+	return 0;
 }
 
 static unsigned int of_bus_pci_get_flags(u32 *addr)
@@ -340,59 +380,6 @@
 }
 
 /*
- * ISA bus specific translator
- */
-
-static int of_bus_isa_match(struct device_node *np)
-{
-	return !strcmp(np->name, "isa");
-}
-
-static void of_bus_isa_count_cells(struct device_node *child,
-				   int *addrc, int *sizec)
-{
-	if (addrc)
-		*addrc = 2;
-	if (sizec)
-		*sizec = 1;
-}
-
-static u64 of_bus_isa_map(u32 *addr, u32 *range, int na, int ns, int pna)
-{
-	u64 cp, s, da;
-
-	/* Check address type match */
-	if ((addr[0] ^ range[0]) & 0x00000001)
-		return OF_BAD_ADDR;
-
-	/* Read address values, skipping high cell */
-	cp = of_read_addr(range + 1, na - 1);
-	s  = of_read_addr(range + na + pna, ns);
-	da = of_read_addr(addr + 1, na - 1);
-
-	if (da < cp || da >= (cp + s))
-		return OF_BAD_ADDR;
-	return da - cp;
-}
-
-static int of_bus_isa_translate(u32 *addr, u64 offset, int na)
-{
-	return of_bus_default_translate(addr + 1, offset, na - 1);
-}
-
-static unsigned int of_bus_isa_get_flags(u32 *addr)
-{
-	unsigned int flags = 0;
-	u32 w = addr[0];
-
-	if (w & 1)
-		flags |= IORESOURCE_IO;
-	else
-		flags |= IORESOURCE_MEM;
-	return flags;
-}
-
-/*
  * SBUS bus specific translator
  */
 
@@ -411,16 +398,11 @@
 		*sizec = 1;
 }
 
-static u64 of_bus_sbus_map(u32 *addr, u32 *range, int na, int ns, int pna)
+static int of_bus_sbus_map(u32 *addr, const u32 *range, int na, int ns, int pna)
 {
 	return of_bus_default_map(addr, range, na, ns, pna);
 }
 
-static int of_bus_sbus_translate(u32 *addr, u64 offset, int na)
-{
-	return of_bus_default_translate(addr, offset, na);
-}
-
 static unsigned int of_bus_sbus_get_flags(u32 *addr)
 {
 	return IORESOURCE_MEM;
@@ -439,19 +421,8 @@
 		.match = of_bus_pci_match,
 		.count_cells = of_bus_pci_count_cells,
 		.map = of_bus_pci_map,
-		.translate = of_bus_pci_translate,
 		.get_flags = of_bus_pci_get_flags,
 	},
-	/* ISA */
-	{
-		.name = "isa",
-		.addr_prop_name = "reg",
-		.match = of_bus_isa_match,
-		.count_cells = of_bus_isa_count_cells,
-		.map = of_bus_isa_map,
-		.translate = of_bus_isa_translate,
-		.get_flags = of_bus_isa_get_flags,
-	},
 	/* SBUS */
 	{
 		.name = "sbus",
@@ -459,7 +430,6 @@
 		.match = of_bus_sbus_match,
 		.count_cells = of_bus_sbus_count_cells,
 		.map = of_bus_sbus_map,
-		.translate = of_bus_sbus_translate,
 		.get_flags = of_bus_sbus_get_flags,
 	},
 	/* Default */
@@ -469,7 +439,6 @@
 		.match = NULL,
 		.count_cells = of_bus_default_count_cells,
 		.map = of_bus_default_map,
-		.translate = of_bus_default_translate,
 		.get_flags = of_bus_default_get_flags,
 	},
 };
@@ -494,33 +463,62 @@
 	u32 *ranges;
 	unsigned int rlen;
 	int rone;
-	u64 offset = OF_BAD_ADDR;
 
 	ranges = of_get_property(parent, "ranges", &rlen);
 	if (ranges == NULL || rlen == 0) {
-		offset = of_read_addr(addr, na);
-		memset(addr, 0, pna * 4);
-		goto finish;
+		u32 result[OF_MAX_ADDR_CELLS];
+		int i;
+
+		memset(result, 0, pna * 4);
+		for (i = 0; i < na; i++)
+			result[pna - 1 - i] =
+				addr[na - 1 - i];
+
+		memcpy(addr, result, pna * 4);
+		return 0;
 	}
 
 	/* Now walk through the ranges */
 	rlen /= 4;
 	rone = na + pna + ns;
 	for (; rlen >= rone; rlen -= rone, ranges += rone) {
-		offset = bus->map(addr, ranges, na, ns, pna);
-		if (offset != OF_BAD_ADDR)
-			break;
+		if (!bus->map(addr, ranges, na, ns, pna))
+			return 0;
 	}
-	if (offset == OF_BAD_ADDR)
+
+	return 1;
+}
+
+static int __init use_1to1_mapping(struct device_node *pp)
+{
+	char *model;
+
+	/* If this is on the PMU bus, don't try to translate it even
+	 * if a ranges property exists.
+	 */
+	if (!strcmp(pp->name, "pmu"))
 		return 1;
 
-	memcpy(addr, ranges + na, 4 * pna);
+	/* If we have a ranges property in the parent, use it.  */
+	if (of_find_property(pp, "ranges", NULL) != NULL)
+		return 0;
+
+	/* If the parent is the dma node of an ISA bus, pass
+	 * the translation up to the root.
+	 */
+	if (!strcmp(pp->name, "dma"))
+		return 0;
 
-finish:
-	/* Translate it into parent bus space */
-	return pbus->translate(addr, offset, pna);
+	/* Similarly for Simba PCI bridges.  */
+	model = of_get_property(pp, "model", NULL);
+	if (model && !strcmp(model, "SUNW,simba"))
+		return 0;
+
+	return 1;
 }
 
+static int of_resource_verbose;
+
 static void __init build_device_resources(struct of_device *op,
 					  struct device *parent)
 {
@@ -564,15 +562,7 @@
 
 		memcpy(addr, reg, na * 4);
 
-		/* If the immediate parent has no ranges property to apply,
-		 * just use a 1<->1 mapping.  Unless it is the 'dma' child
-		 * of an isa bus, which must be passed up towards the root.
-		 *
-		 * Also, don't try to translate PMU bus device registers.
-		 */
-		if ((of_find_property(pp, "ranges", NULL) == NULL &&
-		     strcmp(pp->name, "dma") != 0) ||
-		    !strcmp(pp->name, "pmu")) {
+		if (use_1to1_mapping(pp)) {
 			result = of_read_addr(addr, na);
 			goto build_res;
 		}
@@ -591,7 +581,8 @@
 			pbus = of_match_bus(pp);
 			pbus->count_cells(dp, &pna, &pns);
 
-			if (build_one_resource(dp, bus, pbus, addr, dna, dns, pna))
+			if (build_one_resource(dp, bus, pbus, addr,
+					       dna, dns, pna))
 				break;
 
 			dna = pna;
@@ -601,6 +592,12 @@
 
 	build_res:
 		memset(r, 0, sizeof(*r));
+
+		if (of_resource_verbose)
+			printk("%s reg[%d] -> %lx\n",
+			       op->node->full_name, index,
+			       result);
+
 		if (result != OF_BAD_ADDR) {
 			if (tlb_type == hypervisor)
 				result &= 0x0fffffffffffffffUL;
@@ -684,6 +681,8 @@
 	return ret;
 }
 
+static int of_irq_verbose;
+
 static unsigned int __init build_one_device_irq(struct of_device *op,
 						struct device *parent,
 						unsigned int irq)
@@ -698,10 +697,11 @@
 	if (dp->irq_trans) {
 		irq = dp->irq_trans->irq_build(dp, irq,
 					       dp->irq_trans->data);
-#if 1
-		printk("%s: direct translate %x --> %x\n",
-		       dp->full_name, orig_irq, irq);
-#endif
+
+		if (of_irq_verbose)
+			printk("%s: direct translate %x --> %x\n",
+			       dp->full_name, orig_irq, irq);
+
 		return irq;
 	}
 
@@ -728,12 +728,13 @@
 			iret = apply_interrupt_map(dp, pp,
 						   imap, imlen, imsk,
 						   &irq);
-#if 1
-			printk("%s: Apply [%s:%x] imap --> [%s:%x]\n",
-			       op->node->full_name,
-			       pp->full_name, this_orig_irq,
-			       (iret ? iret->full_name : "NULL"), irq);
-#endif
+
+			if (of_irq_verbose)
+				printk("%s: Apply [%s:%x] imap --> [%s:%x]\n",
+				       op->node->full_name,
+				       pp->full_name, this_orig_irq,
+				       (iret ? iret->full_name : "NULL"), irq);
+
 			if (!iret)
 				break;
 
@@ -747,11 +748,13 @@
 				unsigned int this_orig_irq = irq;
 
 				irq = pci_irq_swizzle(dp, pp, irq);
-#if 1
-				printk("%s: PCI swizzle [%s] %x --> %x\n",
-				       op->node->full_name,
-				       pp->full_name, this_orig_irq, irq);
-#endif
+				if (of_irq_verbose)
+					printk("%s: PCI swizzle [%s] "
+					       "%x --> %x\n",
+					       op->node->full_name,
+					       pp->full_name, this_orig_irq,
+					       irq);
+
 			}
 
 			if (pp->irq_trans) {
@@ -767,10 +770,9 @@
 
 	irq = ip->irq_trans->irq_build(op->node, irq,
 				       ip->irq_trans->data);
-#if 1
-	printk("%s: Apply IRQ trans [%s] %x --> %x\n",
-	       op->node->full_name, ip->full_name, orig_irq, irq);
-#endif
+	if (of_irq_verbose)
+		printk("%s: Apply IRQ trans [%s] %x --> %x\n",
+		       op->node->full_name, ip->full_name, orig_irq, irq);
 
 	return irq;
 }
@@ -870,6 +872,20 @@
 
 postcore_initcall(of_bus_driver_init);
 
+static int __init of_debug(char *str)
+{
+	int val = 0;
+
+	get_option(&str, &val);
+	if (val & 1)
+		of_resource_verbose = 1;
+	if (val & 2)
+		of_irq_verbose = 1;
+	return 1;
+}
+
+__setup("of_debug=", of_debug);
+
 int of_register_driver(struct of_platform_driver *drv, struct bus_type *bus)
 {
 	/* initialize common driver fields */
@@ -922,9 +938,11 @@
 	if (rc)
 		return rc;
 
-	device_create_file(&ofdev->dev, &dev_attr_devspec);
+	rc = device_create_file(&ofdev->dev, &dev_attr_devspec);
+	if (rc)
+		device_unregister(&ofdev->dev);
 
-	return 0;
+	return rc;
 }
 
 void of_device_unregister(struct of_device *ofdev)
diff -urN linux-2.6.18-rc1/arch/sparc64/kernel/pci_psycho.c linux-2.6.18-rc2/arch/sparc64/kernel/pci_psycho.c
--- linux-2.6.18-rc1/arch/sparc64/kernel/pci_psycho.c	2006-07-15 22:34:41.864920152 +0000
+++ linux-2.6.18-rc2/arch/sparc64/kernel/pci_psycho.c	2006-07-15 22:34:47.093487704 +0000
@@ -1099,9 +1099,6 @@
 {
 	char *name = pbm->name;
 
-	sprintf(name, "PSYCHO%d PBM%c",
-		p->index,
-		(pbm == &p->pbm_A ? 'A' : 'B'));
 	pbm->io_space.name = pbm->mem_space.name = name;
 
 	request_resource(&ioport_resource, &pbm->io_space);
@@ -1203,12 +1200,13 @@
 	pbm->io_space.flags = IORESOURCE_IO;
 	pbm->mem_space.end = pbm->mem_space.start + PSYCHO_MEMSPACE_SIZE;
 	pbm->mem_space.flags = IORESOURCE_MEM;
-	pbm_register_toplevel_resources(p, pbm);
 
 	pbm->parent = p;
 	pbm->prom_node = dp;
 	pbm->name = dp->full_name;
 
+	pbm_register_toplevel_resources(p, pbm);
+
 	printk("%s: PSYCHO PCI Bus Module ver[%x:%x]\n",
 	       pbm->name,
 	       pbm->chip_version, pbm->chip_revision);
diff -urN linux-2.6.18-rc1/arch/sparc64/kernel/prom.c linux-2.6.18-rc2/arch/sparc64/kernel/prom.c
--- linux-2.6.18-rc1/arch/sparc64/kernel/prom.c	2006-07-15 22:34:41.868920586 +0000
+++ linux-2.6.18-rc2/arch/sparc64/kernel/prom.c	2006-07-15 22:34:47.097488138 +0000
@@ -539,6 +539,45 @@
 	((ino & 0x20) ? (SABRE_ICLR_SCSI + (((ino) & 0x1f) << 3)) :  \
 			(SABRE_ICLR_A_SLOT0 + (((ino) & 0x1f)<<3)))
 
+static int sabre_device_needs_wsync(struct device_node *dp)
+{
+	struct device_node *parent = dp->parent;
+	char *parent_model, *parent_compat;
+
+	/* This traversal up towards the root is meant to
+	 * handle two cases:
+	 *
+	 * 1) non-PCI bus sitting under PCI, such as 'ebus'
+	 * 2) the PCI controller interrupts themselves, which
+	 *    will use the sabre_irq_build but do not need
+	 *    the DMA synchronization handling
+	 */
+	while (parent) {
+		if (!strcmp(parent->type, "pci"))
+			break;
+		parent = parent->parent;
+	}
+
+	if (!parent)
+		return 0;
+
+	parent_model = of_get_property(parent,
+				       "model", NULL);
+	if (parent_model &&
+	    (!strcmp(parent_model, "SUNW,sabre") ||
+	     !strcmp(parent_model, "SUNW,simba")))
+		return 0;
+
+	parent_compat = of_get_property(parent,
+					"compatible", NULL);
+	if (parent_compat &&
+	    (!strcmp(parent_compat, "pci108e,a000") ||
+	     !strcmp(parent_compat, "pci108e,a001")))
+		return 0;
+
+	return 1;
+}
+
 static unsigned int sabre_irq_build(struct device_node *dp,
 				    unsigned int ino,
 				    void *_data)
@@ -577,15 +616,17 @@
 
 	virt_irq = build_irq(inofixup, iclr, imap);
 
+	/* If the parent device is a PCI<->PCI bridge other than
+	 * APB, we have to install a pre-handler to ensure that
+	 * all pending DMA is drained before the interrupt handler
+	 * is run.
+	 */
 	regs = of_get_property(dp, "reg", NULL);
-	if (regs &&
-	    ((regs->phys_hi >> 16) & 0xff) != irq_data->pci_first_busno) {
+	if (regs && sabre_device_needs_wsync(dp)) {
 		irq_install_pre_handler(virt_irq,
 					sabre_wsync_handler,
 					(void *) (long) regs->phys_hi,
-					(void *)
-					controller_regs +
-					SABRE_WRSYNC);
+					(void *) irq_data);
 	}
 
 	return virt_irq;
diff -urN linux-2.6.18-rc1/arch/sparc64/kernel/setup.c linux-2.6.18-rc2/arch/sparc64/kernel/setup.c
--- linux-2.6.18-rc1/arch/sparc64/kernel/setup.c	2006-07-15 22:34:41.872921020 +0000
+++ linux-2.6.18-rc2/arch/sparc64/kernel/setup.c	2006-07-15 22:34:47.097488138 +0000
@@ -16,7 +16,7 @@
 #include <asm/smp.h>
 #include <linux/user.h>
 #include <linux/a.out.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/delay.h>
 #include <linux/fs.h>
 #include <linux/seq_file.h>
diff -urN linux-2.6.18-rc1/arch/sparc64/kernel/time.c linux-2.6.18-rc2/arch/sparc64/kernel/time.c
--- linux-2.6.18-rc1/arch/sparc64/kernel/time.c	2006-07-15 22:34:41.876921454 +0000
+++ linux-2.6.18-rc2/arch/sparc64/kernel/time.c	2006-07-15 22:34:47.101488572 +0000
@@ -928,8 +928,6 @@
 	__asm__ __volatile__("wrpr	%0, 0x0, %%pstate"
 			     : /* no outputs */
 			     : "r" (pstate));
-
-	local_irq_enable();
 }
 
 struct freq_table {
diff -urN linux-2.6.18-rc1/arch/um/Kconfig.debug linux-2.6.18-rc2/arch/um/Kconfig.debug
--- linux-2.6.18-rc1/arch/um/Kconfig.debug	2006-07-15 22:34:41.880921889 +0000
+++ linux-2.6.18-rc2/arch/um/Kconfig.debug	2006-07-15 22:34:47.105489006 +0000
@@ -47,13 +47,4 @@
         If you're involved in UML kernel development and want to use gcov,
         say Y.  If you're unsure, say N.
 
-config SYSCALL_DEBUG
-	bool "Enable system call debugging"
-	depends on DEBUG_INFO
-	help
-	This adds some system debugging to UML, including keeping a ring buffer
-	with recent system calls and some global and per-task statistics.
-
-	If unsure, say N
-
 endmenu
diff -urN linux-2.6.18-rc1/arch/um/Makefile-x86_64 linux-2.6.18-rc2/arch/um/Makefile-x86_64
--- linux-2.6.18-rc1/arch/um/Makefile-x86_64	2006-07-15 22:34:41.880921889 +0000
+++ linux-2.6.18-rc2/arch/um/Makefile-x86_64	2006-07-15 22:34:47.105489006 +0000
@@ -11,6 +11,7 @@
 CHECKFLAGS  += -m64
 AFLAGS += -m64
 LDFLAGS += -m elf_x86_64
+CPPFLAGS += -m64
 
 ELF_ARCH := i386:x86-64
 ELF_FORMAT := elf64-x86-64
diff -urN linux-2.6.18-rc1/arch/um/defconfig linux-2.6.18-rc2/arch/um/defconfig
--- linux-2.6.18-rc1/arch/um/defconfig	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/defconfig	2006-07-15 22:34:47.109489441 +0000
@@ -526,4 +526,3 @@
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_GPROF is not set
 # CONFIG_GCOV is not set
-# CONFIG_SYSCALL_DEBUG is not set
diff -urN linux-2.6.18-rc1/arch/um/drivers/mconsole_user.c linux-2.6.18-rc2/arch/um/drivers/mconsole_user.c
--- linux-2.6.18-rc1/arch/um/drivers/mconsole_user.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/drivers/mconsole_user.c	2006-07-15 22:34:47.109489441 +0000
@@ -18,7 +18,12 @@
 #include "umid.h"
 
 static struct mconsole_command commands[] = {
-	{ "version", mconsole_version, MCONSOLE_INTR },
+	/* With uts namespaces, uts information becomes process-specific, so
+	 * we need a process context.  If we try handling this in interrupt
+	 * context, we may hit an exiting process without a valid uts
+	 * namespace.
+	 */
+	{ "version", mconsole_version, MCONSOLE_PROC },
 	{ "halt", mconsole_halt, MCONSOLE_PROC },
 	{ "reboot", mconsole_reboot, MCONSOLE_PROC },
 	{ "config", mconsole_config, MCONSOLE_PROC },
diff -urN linux-2.6.18-rc1/arch/um/drivers/net_user.c linux-2.6.18-rc2/arch/um/drivers/net_user.c
--- linux-2.6.18-rc1/arch/um/drivers/net_user.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/drivers/net_user.c	2006-07-15 22:34:47.109489441 +0000
@@ -22,13 +22,14 @@
 {
 	int tap_addr[4];
 
-	if(gate_addr == NULL) return(0);
+	if(gate_addr == NULL)
+		return 0;
 	if(sscanf(gate_addr, "%d.%d.%d.%d", &tap_addr[0], 
 		  &tap_addr[1], &tap_addr[2], &tap_addr[3]) != 4){
 		printk("Invalid tap IP address - '%s'\n", gate_addr);
-		return(-EINVAL);
+		return -EINVAL;
 	}
-	return(0);
+	return 0;
 }
 
 void tap_check_ips(char *gate_addr, unsigned char *eth_addr)
@@ -94,25 +95,25 @@
 	n = os_read_file(fd,  buf,  len);
 
 	if(n == -EAGAIN)
-		return(0);
+		return 0;
 	else if(n == 0)
-		return(-ENOTCONN);
-	return(n);
+		return -ENOTCONN;
+	return n;
 }
 
 int net_recvfrom(int fd, void *buf, int len)
 {
 	int n;
 
-	while(((n = recvfrom(fd,  buf,  len, 0, NULL, NULL)) < 0) && 
-	      (errno == EINTR)) ;
-
+	CATCH_EINTR(n = recvfrom(fd,  buf,  len, 0, NULL, NULL));
 	if(n < 0){
-		if(errno == EAGAIN) return(0);
-		return(-errno);
+		if(errno == EAGAIN)
+			return 0;
+		return -errno;
 	}
-	else if(n == 0) return(-ENOTCONN);
-	return(n);
+	else if(n == 0)
+		return -ENOTCONN;
+	return n;
 }
 
 int net_write(int fd, void *buf, int len)
@@ -122,37 +123,41 @@
 	n = os_write_file(fd, buf, len);
 
 	if(n == -EAGAIN)
-		return(0);
+		return 0;
 	else if(n == 0)
-		return(-ENOTCONN);
-	return(n);
+		return -ENOTCONN;
+	return n;
 }
 
 int net_send(int fd, void *buf, int len)
 {
 	int n;
 
-	while(((n = send(fd, buf, len, 0)) < 0) && (errno == EINTR)) ;
+	CATCH_EINTR(n = send(fd, buf, len, 0));
 	if(n < 0){
-		if(errno == EAGAIN) return(0);
-		return(-errno);
+		if(errno == EAGAIN)
+			return 0;
+		return -errno;
 	}
-	else if(n == 0) return(-ENOTCONN);
-	return(n);	
+	else if(n == 0)
+		return -ENOTCONN;
+	return n;
 }
 
 int net_sendto(int fd, void *buf, int len, void *to, int sock_len)
 {
 	int n;
 
-	while(((n = sendto(fd, buf, len, 0, (struct sockaddr *) to,
-			   sock_len)) < 0) && (errno == EINTR)) ;
+	CATCH_EINTR(n = sendto(fd, buf, len, 0, (struct sockaddr *) to,
+			       sock_len));
 	if(n < 0){
-		if(errno == EAGAIN) return(0);
-		return(-errno);
+		if(errno == EAGAIN)
+			return 0;
+		return -errno;
 	}
-	else if(n == 0) return(-ENOTCONN);
-	return(n);	
+	else if(n == 0)
+		return -ENOTCONN;
+	return n;
 }
 
 struct change_pre_exec_data {
@@ -176,7 +181,7 @@
 	err = os_pipe(fds, 1, 0);
 	if(err < 0){
 		printk("change_tramp - pipe failed, err = %d\n", -err);
-		return(err);
+		return err;
 	}
 	pe_data.close_me = fds[0];
 	pe_data.stdout = fds[1];
@@ -190,7 +195,7 @@
 
 	if (pid > 0)
 		CATCH_EINTR(err = waitpid(pid, NULL, 0));
-	return(pid);
+	return pid;
 }
 
 static void change(char *dev, char *what, unsigned char *addr,
@@ -241,26 +246,15 @@
 	va_start(ap, str);
 	while((arg = va_arg(ap, char **)) != NULL){
 		if(*str == '\0')
-			return(NULL);
+			return NULL;
 		end = strchr(str, ',');
 		if(end != str)
 			*arg = str;
 		if(end == NULL)
-			return(NULL);
+			return NULL;
 		*end++ = '\0';
 		str = end;
 	}
 	va_end(ap);
-	return(str);
+	return str;
 }
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff -urN linux-2.6.18-rc1/arch/um/drivers/tty.c linux-2.6.18-rc2/arch/um/drivers/tty.c
--- linux-2.6.18-rc1/arch/um/drivers/tty.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/drivers/tty.c	2006-07-15 22:34:47.109489441 +0000
@@ -1,4 +1,4 @@
-/* 
+/*
  * Copyright (C) 2001 Jeff Dike (jdike@karaya.com)
  * Licensed under the GPL
  */
@@ -25,17 +25,17 @@
 	if(*str != ':'){
 		printk("tty_init : channel type 'tty' must specify "
 		       "a device\n");
-		return(NULL);
+		return NULL;
 	}
 	str++;
 
 	data = um_kmalloc(sizeof(*data));
 	if(data == NULL)
-		return(NULL);
+		return NULL;
 	*data = ((struct tty_chan) { .dev 	= str,
 				     .raw 	= opts->raw });
-				     
-	return(data);
+
+	return data;
 }
 
 static int tty_open(int input, int output, int primary, void *d,
@@ -45,19 +45,21 @@
 	int fd, err;
 
 	fd = os_open_file(data->dev, of_set_rw(OPENFLAGS(), input, output), 0);
-	if(fd < 0) return(fd);
+	if(fd < 0)
+		return fd;
+
 	if(data->raw){
 		CATCH_EINTR(err = tcgetattr(fd, &data->tt));
 		if(err)
-			return(err);
+			return err;
 
 		err = raw(fd);
 		if(err)
-			return(err);
+			return err;
 	}
 
 	*dev_out = data->dev;
-	return(fd);
+	return fd;
 }
 
 struct chan_ops tty_ops = {
@@ -72,14 +74,3 @@
 	.free		= generic_free,
 	.winch		= 0,
 };
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff -urN linux-2.6.18-rc1/arch/um/drivers/ubd_kern.c linux-2.6.18-rc2/arch/um/drivers/ubd_kern.c
--- linux-2.6.18-rc1/arch/um/drivers/ubd_kern.c	2006-07-15 22:34:41.880921889 +0000
+++ linux-2.6.18-rc2/arch/um/drivers/ubd_kern.c	2006-07-15 22:34:47.109489441 +0000
@@ -627,7 +627,6 @@
 			
 {
 	struct gendisk *disk;
-	int err;
 
 	disk = alloc_disk(1 << UBD_SHIFT);
 	if(disk == NULL)
diff -urN linux-2.6.18-rc1/arch/um/include/irq_user.h linux-2.6.18-rc2/arch/um/include/irq_user.h
--- linux-2.6.18-rc1/arch/um/include/irq_user.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/include/irq_user.h	2006-07-15 22:34:47.109489441 +0000
@@ -6,6 +6,8 @@
 #ifndef __IRQ_USER_H__
 #define __IRQ_USER_H__
 
+#include "uml-config.h"
+
 struct irq_fd {
 	struct irq_fd *next;
 	void *id;
@@ -26,9 +28,10 @@
 extern void reactivate_fd(int fd, int irqnum);
 extern void deactivate_fd(int fd, int irqnum);
 extern int deactivate_all_fds(void);
-extern void forward_interrupts(int pid);
 extern int activate_ipi(int fd, int pid);
-extern unsigned long irq_lock(void);
-extern void irq_unlock(unsigned long flags);
+
+#ifdef CONFIG_MODE_TT
+extern void forward_interrupts(int pid);
+#endif
 
 #endif
diff -urN linux-2.6.18-rc1/arch/um/include/kern_util.h linux-2.6.18-rc2/arch/um/include/kern_util.h
--- linux-2.6.18-rc1/arch/um/include/kern_util.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/include/kern_util.h	2006-07-15 22:34:47.109489441 +0000
@@ -72,10 +72,8 @@
 extern void *syscall_sp(void *t);
 extern void syscall_trace(union uml_pt_regs *regs, int entryexit);
 extern int hz(void);
-extern void uml_idle_timer(void);
 extern unsigned int do_IRQ(int irq, union uml_pt_regs *regs);
 extern int external_pid(void *t);
-extern void boot_timer_handler(int sig);
 extern void interrupt_end(void);
 extern void initial_thread_cb(void (*proc)(void *), void *arg);
 extern int debugger_signal(int status, int pid);
diff -urN linux-2.6.18-rc1/arch/um/include/longjmp.h linux-2.6.18-rc2/arch/um/include/longjmp.h
--- linux-2.6.18-rc1/arch/um/include/longjmp.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/include/longjmp.h	2006-07-15 22:34:47.109489441 +0000
@@ -8,8 +8,8 @@
 	longjmp(*buf, val);	\
 } while(0)
 
-#define UML_SETJMP(buf, enable) ({ \
-	int n; \
+#define UML_SETJMP(buf) ({ \
+	int n, enable;	   \
 	enable = get_signals(); \
 	n = setjmp(*buf); \
 	if(n != 0) \
diff -urN linux-2.6.18-rc1/arch/um/include/os.h linux-2.6.18-rc2/arch/um/include/os.h
--- linux-2.6.18-rc1/arch/um/include/os.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/include/os.h	2006-07-15 22:34:47.113489875 +0000
@@ -1,4 +1,4 @@
-/* 
+/*
  * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
  * Licensed under the GPL
  */
@@ -15,9 +15,9 @@
 #include "irq_user.h"
 #include "sysdep/tls.h"
 
-#define OS_TYPE_FILE 1 
-#define OS_TYPE_DIR 2 
-#define OS_TYPE_SYMLINK 3 
+#define OS_TYPE_FILE 1
+#define OS_TYPE_DIR 2
+#define OS_TYPE_SYMLINK 3
 #define OS_TYPE_CHARDEV 4
 #define OS_TYPE_BLOCKDEV 5
 #define OS_TYPE_FIFO 6
@@ -61,68 +61,68 @@
 };
 
 #define OPENFLAGS() ((struct openflags) { .r = 0, .w = 0, .s = 0, .c = 0, \
- 					  .t = 0, .a = 0, .e = 0, .cl = 0 })
+					  .t = 0, .a = 0, .e = 0, .cl = 0 })
 
 static inline struct openflags of_read(struct openflags flags)
 {
-	flags.r = 1; 
-	return(flags);
+	flags.r = 1;
+	return flags;
 }
 
 static inline struct openflags of_write(struct openflags flags)
 {
-	flags.w = 1; 
-	return(flags); 
+	flags.w = 1;
+	return flags;
 }
 
 static inline struct openflags of_rdwr(struct openflags flags)
 {
-	return(of_read(of_write(flags)));
+	return of_read(of_write(flags));
 }
 
 static inline struct openflags of_set_rw(struct openflags flags, int r, int w)
 {
 	flags.r = r;
 	flags.w = w;
-	return(flags);
+	return flags;
 }
 
 static inline struct openflags of_sync(struct openflags flags)
-{ 
-	flags.s = 1; 
-	return(flags); 
+{
+	flags.s = 1;
+	return flags;
 }
 
 static inline struct openflags of_create(struct openflags flags)
-{ 
-	flags.c = 1; 
-	return(flags); 
+{
+	flags.c = 1;
+	return flags;
 }
- 
+
 static inline struct openflags of_trunc(struct openflags flags)
-{ 
-	flags.t = 1; 
-	return(flags); 
+{
+	flags.t = 1;
+	return flags;
 }
- 
+
 static inline struct openflags of_append(struct openflags flags)
-{ 
-	flags.a = 1; 
-	return(flags); 
+{
+	flags.a = 1;
+	return flags;
 }
- 
+
 static inline struct openflags of_excl(struct openflags flags)
-{ 
-	flags.e = 1; 
-	return(flags); 
+{
+	flags.e = 1;
+	return flags;
 }
 
 static inline struct openflags of_cloexec(struct openflags flags)
-{ 
-	flags.cl = 1; 
-	return(flags); 
+{
+	flags.cl = 1;
+	return flags;
 }
-  
+
 /* file.c */
 extern int os_stat_file(const char *file_name, struct uml_stat *buf);
 extern int os_stat_fd(const int fd, struct uml_stat *buf);
@@ -199,12 +199,12 @@
 extern int os_getpgrp(void);
 
 extern void init_new_thread_stack(void *sig_stack, void (*usr1_handler)(int));
-extern void init_new_thread_signals(int altstack);
+extern void init_new_thread_signals(void);
 extern int run_kernel_thread(int (*fn)(void *), void *arg, void **jmp_ptr);
 
 extern int os_map_memory(void *virt, int fd, unsigned long long off,
 			 unsigned long len, int r, int w, int x);
-extern int os_protect_memory(void *addr, unsigned long len, 
+extern int os_protect_memory(void *addr, unsigned long len,
 			     int r, int w, int x);
 extern int os_unmap_memory(void *addr, int len);
 extern int os_drop_memory(void *addr, int length);
@@ -318,7 +318,6 @@
 
 /* irq.c */
 extern int os_waiting_for_events(struct irq_fd *active_fds);
-extern int os_isatty(int fd);
 extern int os_create_pollfd(int fd, int events, void *tmp_pfd, int size_tmpfds);
 extern void os_free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg,
 		struct irq_fd *active_fds, struct irq_fd ***last_irq_ptr2);
@@ -330,9 +329,8 @@
 extern void init_irq_signals(int on_sigstack);
 
 /* sigio.c */
-extern void write_sigio_workaround(void);
-extern int add_sigio_fd(int fd, int read);
 extern int ignore_sigio_fd(int fd);
+extern void maybe_sigio_broken(int fd, int read);
 
 /* skas/trap */
 extern void sig_handler_common_skas(int sig, void *sc_ptr);
diff -urN linux-2.6.18-rc1/arch/um/include/skas/mode_kern_skas.h linux-2.6.18-rc2/arch/um/include/skas/mode_kern_skas.h
--- linux-2.6.18-rc1/arch/um/include/skas/mode_kern_skas.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/include/skas/mode_kern_skas.h	2006-07-15 22:34:47.113489875 +0000
@@ -29,8 +29,7 @@
 extern void force_flush_all_skas(void);
 extern long execute_syscall_skas(void *r);
 extern void before_mem_skas(unsigned long unused);
-extern unsigned long set_task_sizes_skas(int arg, unsigned long *host_size_out,
-					 unsigned long *task_size_out);
+extern unsigned long set_task_sizes_skas(unsigned long *task_size_out);
 extern int start_uml_skas(void);
 extern int external_pid_skas(struct task_struct *task);
 extern int thread_pid_skas(struct task_struct *task);
diff -urN linux-2.6.18-rc1/arch/um/include/tt/mode_kern_tt.h linux-2.6.18-rc2/arch/um/include/tt/mode_kern_tt.h
--- linux-2.6.18-rc1/arch/um/include/tt/mode_kern_tt.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/include/tt/mode_kern_tt.h	2006-07-15 22:34:47.113489875 +0000
@@ -30,8 +30,7 @@
 extern void force_flush_all_tt(void);
 extern long execute_syscall_tt(void *r);
 extern void before_mem_tt(unsigned long brk_start);
-extern unsigned long set_task_sizes_tt(int arg, unsigned long *host_size_out,
-				       unsigned long *task_size_out);
+extern unsigned long set_task_sizes_tt(unsigned long *task_size_out);
 extern int start_uml_tt(void);
 extern int external_pid_tt(struct task_struct *task);
 extern int thread_pid_tt(struct task_struct *task);
diff -urN linux-2.6.18-rc1/arch/um/kernel/Makefile linux-2.6.18-rc2/arch/um/kernel/Makefile
--- linux-2.6.18-rc1/arch/um/kernel/Makefile	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/Makefile	2006-07-15 22:34:47.113489875 +0000
@@ -6,16 +6,14 @@
 extra-y := vmlinux.lds
 clean-files :=
 
-obj-y = config.o exec_kern.o exitcode.o \
-	init_task.o irq.o ksyms.o mem.o physmem.o \
-	process_kern.o ptrace.o reboot.o resource.o sigio_kern.o \
-	signal_kern.o smp.o syscall_kern.o sysrq.o \
-	time_kern.o tlb.o trap_kern.o uaccess.o um_arch.o umid.o
+obj-y = config.o exec.o exitcode.o init_task.o irq.o ksyms.o mem.o \
+	physmem.o process_kern.o ptrace.o reboot.o resource.o sigio.o \
+	signal.o smp.o syscall.o sysrq.o time.o tlb.o trap.o uaccess.o \
+	um_arch.o umid.o
 
 obj-$(CONFIG_BLK_DEV_INITRD) += initrd.o
 obj-$(CONFIG_GPROF)	+= gprof_syms.o
 obj-$(CONFIG_GCOV)	+= gmon_syms.o
-obj-$(CONFIG_SYSCALL_DEBUG) += syscall.o
 
 obj-$(CONFIG_MODE_TT) += tt/
 obj-$(CONFIG_MODE_SKAS) += skas/
diff -urN linux-2.6.18-rc1/arch/um/kernel/exec.c linux-2.6.18-rc2/arch/um/kernel/exec.c
--- linux-2.6.18-rc1/arch/um/kernel/exec.c	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/exec.c	2006-07-15 22:34:47.113489875 +0000
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#include "linux/slab.h"
+#include "linux/smp_lock.h"
+#include "linux/ptrace.h"
+#include "asm/ptrace.h"
+#include "asm/pgtable.h"
+#include "asm/tlbflush.h"
+#include "asm/uaccess.h"
+#include "user_util.h"
+#include "kern_util.h"
+#include "mem_user.h"
+#include "kern.h"
+#include "irq_user.h"
+#include "tlb.h"
+#include "os.h"
+#include "choose-mode.h"
+#include "mode_kern.h"
+
+void flush_thread(void)
+{
+	arch_flush_thread(&current->thread.arch);
+	CHOOSE_MODE(flush_thread_tt(), flush_thread_skas());
+}
+
+void start_thread(struct pt_regs *regs, unsigned long eip, unsigned long esp)
+{
+	CHOOSE_MODE_PROC(start_thread_tt, start_thread_skas, regs, eip, esp);
+}
+
+#ifdef CONFIG_TTY_LOG
+extern void log_exec(char **argv, void *tty);
+#endif
+
+static long execve1(char *file, char __user * __user *argv,
+		    char __user *__user *env)
+{
+        long error;
+
+#ifdef CONFIG_TTY_LOG
+	task_lock(current);
+	log_exec(argv, current->signal->tty);
+	task_unlock(current);
+#endif
+        error = do_execve(file, argv, env, &current->thread.regs);
+        if (error == 0){
+		task_lock(current);
+                current->ptrace &= ~PT_DTRACE;
+#ifdef SUBARCH_EXECVE1
+		SUBARCH_EXECVE1(&current->thread.regs.regs);
+#endif
+		task_unlock(current);
+                set_cmdline(current_cmd());
+        }
+        return(error);
+}
+
+long um_execve(char *file, char __user *__user *argv, char __user *__user *env)
+{
+	long err;
+
+	err = execve1(file, argv, env);
+	if(!err)
+		do_longjmp(current->thread.exec_buf, 1);
+	return(err);
+}
+
+long sys_execve(char __user *file, char __user *__user *argv,
+		char __user *__user *env)
+{
+	long error;
+	char *filename;
+
+	lock_kernel();
+	filename = getname(file);
+	error = PTR_ERR(filename);
+	if (IS_ERR(filename)) goto out;
+	error = execve1(filename, argv, env);
+	putname(filename);
+ out:
+	unlock_kernel();
+	return(error);
+}
diff -urN linux-2.6.18-rc1/arch/um/kernel/exec_kern.c linux-2.6.18-rc2/arch/um/kernel/exec_kern.c
--- linux-2.6.18-rc1/arch/um/kernel/exec_kern.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/exec_kern.c	1970-01-01 00:00:00.000000000 +0000
@@ -1,77 +0,0 @@
-/* 
- * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#include "linux/slab.h"
-#include "linux/smp_lock.h"
-#include "linux/ptrace.h"
-#include "asm/ptrace.h"
-#include "asm/pgtable.h"
-#include "asm/tlbflush.h"
-#include "asm/uaccess.h"
-#include "user_util.h"
-#include "kern_util.h"
-#include "mem_user.h"
-#include "kern.h"
-#include "irq_user.h"
-#include "tlb.h"
-#include "os.h"
-#include "choose-mode.h"
-#include "mode_kern.h"
-
-void flush_thread(void)
-{
-	arch_flush_thread(&current->thread.arch);
-	CHOOSE_MODE(flush_thread_tt(), flush_thread_skas());
-}
-
-void start_thread(struct pt_regs *regs, unsigned long eip, unsigned long esp)
-{
-	CHOOSE_MODE_PROC(start_thread_tt, start_thread_skas, regs, eip, esp);
-}
-
-static long execve1(char *file, char __user * __user *argv,
-		    char __user *__user *env)
-{
-        long error;
-
-#ifdef CONFIG_TTY_LOG
-	log_exec(argv, current->tty);
-#endif
-        error = do_execve(file, argv, env, &current->thread.regs);
-        if (error == 0){
-		task_lock(current);
-                current->ptrace &= ~PT_DTRACE;
-		task_unlock(current);
-                set_cmdline(current_cmd());
-        }
-        return(error);
-}
-
-long um_execve(char *file, char __user *__user *argv, char __user *__user *env)
-{
-	long err;
-
-	err = execve1(file, argv, env);
-	if(!err)
-		do_longjmp(current->thread.exec_buf, 1);
-	return(err);
-}
-
-long sys_execve(char __user *file, char __user *__user *argv,
-		char __user *__user *env)
-{
-	long error;
-	char *filename;
-
-	lock_kernel();
-	filename = getname(file);
-	error = PTR_ERR(filename);
-	if (IS_ERR(filename)) goto out;
-	error = execve1(filename, argv, env);
-	putname(filename);
- out:
-	unlock_kernel();
-	return(error);
-}
diff -urN linux-2.6.18-rc1/arch/um/kernel/irq.c linux-2.6.18-rc2/arch/um/kernel/irq.c
--- linux-2.6.18-rc1/arch/um/kernel/irq.c	2006-07-15 22:34:41.880921889 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/irq.c	2006-07-15 22:34:47.113489875 +0000
@@ -110,18 +110,7 @@
 	free_irqs();
 }
 
-static void maybe_sigio_broken(int fd, int type)
-{
-	if (os_isatty(fd)) {
-		if ((type == IRQ_WRITE) && !pty_output_sigio) {
-			write_sigio_workaround();
-			add_sigio_fd(fd, 0);
-		} else if ((type == IRQ_READ) && !pty_close_sigio) {
-			write_sigio_workaround();
-			add_sigio_fd(fd, 1);
-		}
-	}
-}
+static DEFINE_SPINLOCK(irq_lock);
 
 int activate_fd(int irq, int fd, int type, void *dev_id)
 {
@@ -166,7 +155,7 @@
 	 * this is called only from process context, and can be locked with
 	 * a semaphore.
 	 */
-	flags = irq_lock();
+	spin_lock_irqsave(&irq_lock, flags);
 	for (irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next) {
 		if ((irq_fd->fd == fd) && (irq_fd->type == type)) {
 			printk("Registering fd %d twice\n", fd);
@@ -199,7 +188,7 @@
 		 * so we will not be able to put new pollfd struct to pollfds
 		 * then we free the buffer tmp_fds and try again.
 		 */
-		irq_unlock(flags);
+		spin_unlock_irqrestore(&irq_lock, flags);
 		kfree(tmp_pfd);
 		tmp_pfd = NULL;
 
@@ -207,24 +196,24 @@
 		if (tmp_pfd == NULL)
 			goto out_kfree;
 
-		flags = irq_lock();
+		spin_lock_irqsave(&irq_lock, flags);
 	}
 	/*-------------*/
 
 	*last_irq_ptr = new_fd;
 	last_irq_ptr = &new_fd->next;
 
-	irq_unlock(flags);
+	spin_unlock_irqrestore(&irq_lock, flags);
 
 	/* This calls activate_fd, so it has to be outside the critical
 	 * section.
 	 */
-	maybe_sigio_broken(fd, type);
+	maybe_sigio_broken(fd, (type == IRQ_READ));
 
 	return(0);
 
  out_unlock:
-	irq_unlock(flags);
+	spin_unlock_irqrestore(&irq_lock, flags);
  out_kfree:
 	kfree(new_fd);
  out:
@@ -235,9 +224,9 @@
 {
 	unsigned long flags;
 
-	flags = irq_lock();
+	spin_lock_irqsave(&irq_lock, flags);
 	os_free_irq_by_cb(test, arg, active_fds, &last_irq_ptr);
-	irq_unlock(flags);
+	spin_unlock_irqrestore(&irq_lock, flags);
 }
 
 struct irq_and_dev {
@@ -304,19 +293,19 @@
 	unsigned long flags;
 	int i;
 
-	flags = irq_lock();
+	spin_lock_irqsave(&irq_lock, flags);
 	irq = find_irq_by_fd(fd, irqnum, &i);
 	if (irq == NULL) {
-		irq_unlock(flags);
+		spin_unlock_irqrestore(&irq_lock, flags);
 		return;
 	}
 	os_set_pollfd(i, irq->fd);
-	irq_unlock(flags);
+	spin_unlock_irqrestore(&irq_lock, flags);
 
 	/* This calls activate_fd, so it has to be outside the critical
 	 * section.
 	 */
-	maybe_sigio_broken(fd, irq->type);
+	maybe_sigio_broken(fd, (irq->type == IRQ_READ));
 }
 
 void deactivate_fd(int fd, int irqnum)
@@ -325,13 +314,13 @@
 	unsigned long flags;
 	int i;
 
-	flags = irq_lock();
+	spin_lock_irqsave(&irq_lock, flags);
 	irq = find_irq_by_fd(fd, irqnum, &i);
 	if (irq == NULL)
 		goto out;
 	os_set_pollfd(i, -1);
  out:
-	irq_unlock(flags);
+	spin_unlock_irqrestore(&irq_lock, flags);
 }
 
 int deactivate_all_fds(void)
@@ -350,13 +339,14 @@
 	return 0;
 }
 
+#ifdef CONFIG_MODE_TT
 void forward_interrupts(int pid)
 {
 	struct irq_fd *irq;
 	unsigned long flags;
 	int err;
 
-	flags = irq_lock();
+	spin_lock_irqsave(&irq_lock, flags);
 	for (irq = active_fds; irq != NULL; irq = irq->next) {
 		err = os_set_owner(irq->fd, pid);
 		if (err < 0) {
@@ -369,8 +359,9 @@
 
 		irq->pid = pid;
 	}
-	irq_unlock(flags);
+	spin_unlock_irqrestore(&irq_lock, flags);
 }
+#endif
 
 /*
  * do_IRQ handles all normal device IRQ's (the special
@@ -403,21 +394,6 @@
 EXPORT_SYMBOL(um_request_irq);
 EXPORT_SYMBOL(reactivate_fd);
 
-static DEFINE_SPINLOCK(irq_spinlock);
-
-unsigned long irq_lock(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&irq_spinlock, flags);
-	return flags;
-}
-
-void irq_unlock(unsigned long flags)
-{
-	spin_unlock_irqrestore(&irq_spinlock, flags);
-}
-
 /* hw_interrupt_type must define (startup || enable) &&
  * (shutdown || disable) && end */
 static void dummy(unsigned int irq)
diff -urN linux-2.6.18-rc1/arch/um/kernel/ksyms.c linux-2.6.18-rc2/arch/um/kernel/ksyms.c
--- linux-2.6.18-rc1/arch/um/kernel/ksyms.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/ksyms.c	2006-07-15 22:34:47.113489875 +0000
@@ -88,12 +88,6 @@
 EXPORT_SYMBOL(do_gettimeofday);
 EXPORT_SYMBOL(do_settimeofday);
 
-/* This is here because UML expands lseek to sys_lseek, not to a system
- * call instruction.
- */
-EXPORT_SYMBOL(sys_lseek);
-EXPORT_SYMBOL(sys_wait4);
-
 #ifdef CONFIG_SMP
 
 /* required for SMP */
diff -urN linux-2.6.18-rc1/arch/um/kernel/mem.c linux-2.6.18-rc2/arch/um/kernel/mem.c
--- linux-2.6.18-rc1/arch/um/kernel/mem.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/mem.c	2006-07-15 22:34:47.113489875 +0000
@@ -24,8 +24,6 @@
 #include "init.h"
 #include "kern_constants.h"
 
-extern char __binary_start;
-
 /* Changed during early boot */
 unsigned long *empty_zero_page = NULL;
 unsigned long *empty_bad_page = NULL;
@@ -65,8 +63,6 @@
 
 void mem_init(void)
 {
-	unsigned long start;
-
 	max_low_pfn = (high_physmem - uml_physmem) >> PAGE_SHIFT;
 
         /* clear the zero-page */
@@ -81,13 +77,6 @@
 	free_bootmem(__pa(brk_end), uml_reserved - brk_end);
 	uml_reserved = brk_end;
 
-	/* Fill in any hole at the start of the binary */
-	start = (unsigned long) &__binary_start & PAGE_MASK;
-	if(uml_physmem != start){
-		map_memory(uml_physmem, __pa(uml_physmem), start - uml_physmem,
-			   1, 1, 0);
-	}
-
 	/* this will put all low memory onto the freelists */
 	totalram_pages = free_all_bootmem();
 	totalhigh_pages = highmem >> PAGE_SHIFT;
diff -urN linux-2.6.18-rc1/arch/um/kernel/physmem.c linux-2.6.18-rc2/arch/um/kernel/physmem.c
--- linux-2.6.18-rc1/arch/um/kernel/physmem.c	2006-07-15 22:34:41.880921889 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/physmem.c	2006-07-15 22:34:47.113489875 +0000
@@ -317,7 +317,7 @@
 	}
 }
 
-extern int __syscall_stub_start, __binary_start;
+extern int __syscall_stub_start;
 
 void setup_physmem(unsigned long start, unsigned long reserve_end,
 		   unsigned long len, unsigned long long highmem)
diff -urN linux-2.6.18-rc1/arch/um/kernel/sigio.c linux-2.6.18-rc2/arch/um/kernel/sigio.c
--- linux-2.6.18-rc1/arch/um/kernel/sigio.c	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/sigio.c	2006-07-15 22:34:47.113489875 +0000
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2002 - 2003 Jeff Dike (jdike@addtoit.com)
+ * Licensed under the GPL
+ */
+
+#include "linux/kernel.h"
+#include "linux/list.h"
+#include "linux/slab.h"
+#include "linux/signal.h"
+#include "linux/interrupt.h"
+#include "init.h"
+#include "sigio.h"
+#include "irq_user.h"
+#include "irq_kern.h"
+#include "os.h"
+
+/* Protected by sigio_lock() called from write_sigio_workaround */
+static int sigio_irq_fd = -1;
+
+static irqreturn_t sigio_interrupt(int irq, void *data, struct pt_regs *unused)
+{
+	char c;
+
+	os_read_file(sigio_irq_fd, &c, sizeof(c));
+	reactivate_fd(sigio_irq_fd, SIGIO_WRITE_IRQ);
+	return(IRQ_HANDLED);
+}
+
+int write_sigio_irq(int fd)
+{
+	int err;
+
+	err = um_request_irq(SIGIO_WRITE_IRQ, fd, IRQ_READ, sigio_interrupt,
+			     IRQF_DISABLED|IRQF_SAMPLE_RANDOM, "write sigio",
+			     NULL);
+	if(err){
+		printk("write_sigio_irq : um_request_irq failed, err = %d\n",
+		       err);
+		return(-1);
+	}
+	sigio_irq_fd = fd;
+	return(0);
+}
+
+static DEFINE_SPINLOCK(sigio_spinlock);
+
+void sigio_lock(void)
+{
+	spin_lock(&sigio_spinlock);
+}
+
+void sigio_unlock(void)
+{
+	spin_unlock(&sigio_spinlock);
+}
diff -urN linux-2.6.18-rc1/arch/um/kernel/sigio_kern.c linux-2.6.18-rc2/arch/um/kernel/sigio_kern.c
--- linux-2.6.18-rc1/arch/um/kernel/sigio_kern.c	2006-07-15 22:34:41.880921889 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/sigio_kern.c	1970-01-01 00:00:00.000000000 +0000
@@ -1,69 +0,0 @@
-/*
- * Copyright (C) 2002 - 2003 Jeff Dike (jdike@addtoit.com)
- * Licensed under the GPL
- */
-
-#include "linux/kernel.h"
-#include "linux/list.h"
-#include "linux/slab.h"
-#include "linux/signal.h"
-#include "linux/interrupt.h"
-#include "init.h"
-#include "sigio.h"
-#include "irq_user.h"
-#include "irq_kern.h"
-#include "os.h"
-
-/* Protected by sigio_lock() called from write_sigio_workaround */
-static int sigio_irq_fd = -1;
-
-static irqreturn_t sigio_interrupt(int irq, void *data, struct pt_regs *unused)
-{
-	char c;
-
-	os_read_file(sigio_irq_fd, &c, sizeof(c));
-	reactivate_fd(sigio_irq_fd, SIGIO_WRITE_IRQ);
-	return(IRQ_HANDLED);
-}
-
-int write_sigio_irq(int fd)
-{
-	int err;
-
-	err = um_request_irq(SIGIO_WRITE_IRQ, fd, IRQ_READ, sigio_interrupt,
-			     IRQF_DISABLED | IRQF_SAMPLE_RANDOM, "write sigio",
-			     NULL);
-	if(err){
-		printk("write_sigio_irq : um_request_irq failed, err = %d\n",
-		       err);
-		return(-1);
-	}
-	sigio_irq_fd = fd;
-	return(0);
-}
-
-static DEFINE_SPINLOCK(sigio_spinlock);
-
-void sigio_lock(void)
-{
-	spin_lock(&sigio_spinlock);
-}
-
-void sigio_unlock(void)
-{
-	spin_unlock(&sigio_spinlock);
-}
-
-extern void sigio_cleanup(void);
-__uml_exitcall(sigio_cleanup);
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff -urN linux-2.6.18-rc1/arch/um/kernel/signal.c linux-2.6.18-rc2/arch/um/kernel/signal.c
--- linux-2.6.18-rc1/arch/um/kernel/signal.c	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/signal.c	2006-07-15 22:34:47.113489875 +0000
@@ -0,0 +1,191 @@
+/*
+ * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#include "linux/config.h"
+#include "linux/stddef.h"
+#include "linux/sys.h"
+#include "linux/sched.h"
+#include "linux/wait.h"
+#include "linux/kernel.h"
+#include "linux/smp_lock.h"
+#include "linux/module.h"
+#include "linux/slab.h"
+#include "linux/tty.h"
+#include "linux/binfmts.h"
+#include "linux/ptrace.h"
+#include "asm/signal.h"
+#include "asm/uaccess.h"
+#include "asm/unistd.h"
+#include "user_util.h"
+#include "asm/ucontext.h"
+#include "kern_util.h"
+#include "signal_kern.h"
+#include "kern.h"
+#include "frame_kern.h"
+#include "sigcontext.h"
+#include "mode.h"
+
+EXPORT_SYMBOL(block_signals);
+EXPORT_SYMBOL(unblock_signals);
+
+#define _S(nr) (1<<((nr)-1))
+
+#define _BLOCKABLE (~(_S(SIGKILL) | _S(SIGSTOP)))
+
+/*
+ * OK, we're invoking a handler
+ */
+static int handle_signal(struct pt_regs *regs, unsigned long signr,
+			 struct k_sigaction *ka, siginfo_t *info,
+			 sigset_t *oldset)
+{
+	unsigned long sp;
+	int err;
+
+	/* Always make any pending restarted system calls return -EINTR */
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
+	/* Did we come from a system call? */
+	if(PT_REGS_SYSCALL_NR(regs) >= 0){
+		/* If so, check system call restarting.. */
+		switch(PT_REGS_SYSCALL_RET(regs)){
+		case -ERESTART_RESTARTBLOCK:
+		case -ERESTARTNOHAND:
+			PT_REGS_SYSCALL_RET(regs) = -EINTR;
+			break;
+
+		case -ERESTARTSYS:
+			if (!(ka->sa.sa_flags & SA_RESTART)) {
+				PT_REGS_SYSCALL_RET(regs) = -EINTR;
+				break;
+			}
+		/* fallthrough */
+		case -ERESTARTNOINTR:
+			PT_REGS_RESTART_SYSCALL(regs);
+			PT_REGS_ORIG_SYSCALL(regs) = PT_REGS_SYSCALL_NR(regs);
+			break;
+		}
+	}
+
+	sp = PT_REGS_SP(regs);
+	if((ka->sa.sa_flags & SA_ONSTACK) && (sas_ss_flags(sp) == 0))
+		sp = current->sas_ss_sp + current->sas_ss_size;
+
+#ifdef CONFIG_ARCH_HAS_SC_SIGNALS
+	if(!(ka->sa.sa_flags & SA_SIGINFO))
+		err = setup_signal_stack_sc(sp, signr, ka, regs, oldset);
+	else
+#endif
+		err = setup_signal_stack_si(sp, signr, ka, regs, info, oldset);
+
+	if(err){
+		spin_lock_irq(&current->sighand->siglock);
+		current->blocked = *oldset;
+		recalc_sigpending();
+		spin_unlock_irq(&current->sighand->siglock);
+		force_sigsegv(signr, current);
+	} else {
+		spin_lock_irq(&current->sighand->siglock);
+		sigorsets(&current->blocked, &current->blocked,
+			  &ka->sa.sa_mask);
+		 if(!(ka->sa.sa_flags & SA_NODEFER))
+			sigaddset(&current->blocked, signr);
+		recalc_sigpending();
+		spin_unlock_irq(&current->sighand->siglock);
+	}
+
+	return err;
+}
+
+static int kern_do_signal(struct pt_regs *regs)
+{
+	struct k_sigaction ka_copy;
+	siginfo_t info;
+	sigset_t *oldset;
+	int sig, handled_sig = 0;
+
+	if (test_thread_flag(TIF_RESTORE_SIGMASK))
+		oldset = &current->saved_sigmask;
+	else
+		oldset = &current->blocked;
+
+	while((sig = get_signal_to_deliver(&info, &ka_copy, regs, NULL)) > 0){
+		handled_sig = 1;
+		/* Whee!  Actually deliver the signal.  */
+		if(!handle_signal(regs, sig, &ka_copy, &info, oldset)){
+			/* a signal was successfully delivered; the saved
+			 * sigmask will have been stored in the signal frame,
+			 * and will be restored by sigreturn, so we can simply
+			 * clear the TIF_RESTORE_SIGMASK flag */
+			if (test_thread_flag(TIF_RESTORE_SIGMASK))
+				clear_thread_flag(TIF_RESTORE_SIGMASK);
+			break;
+		}
+	}
+
+	/* Did we come from a system call? */
+	if(!handled_sig && (PT_REGS_SYSCALL_NR(regs) >= 0)){
+		/* Restart the system call - no handlers present */
+		switch(PT_REGS_SYSCALL_RET(regs)){
+		case -ERESTARTNOHAND:
+		case -ERESTARTSYS:
+		case -ERESTARTNOINTR:
+			PT_REGS_ORIG_SYSCALL(regs) = PT_REGS_SYSCALL_NR(regs);
+			PT_REGS_RESTART_SYSCALL(regs);
+			break;
+		case -ERESTART_RESTARTBLOCK:
+			PT_REGS_ORIG_SYSCALL(regs) = __NR_restart_syscall;
+			PT_REGS_RESTART_SYSCALL(regs);
+			break;
+ 		}
+	}
+
+	/* This closes a way to execute a system call on the host.  If
+	 * you set a breakpoint on a system call instruction and singlestep
+	 * from it, the tracing thread used to PTRACE_SINGLESTEP the process
+	 * rather than PTRACE_SYSCALL it, allowing the system call to execute
+	 * on the host.  The tracing thread will check this flag and
+	 * PTRACE_SYSCALL if necessary.
+	 */
+	if(current->ptrace & PT_DTRACE)
+		current->thread.singlestep_syscall =
+			is_syscall(PT_REGS_IP(&current->thread.regs));
+
+	/* if there's no signal to deliver, we just put the saved sigmask
+	 * back */
+	if (!handled_sig && test_thread_flag(TIF_RESTORE_SIGMASK)) {
+		clear_thread_flag(TIF_RESTORE_SIGMASK);
+		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+	}
+	return(handled_sig);
+}
+
+int do_signal(void)
+{
+	return(kern_do_signal(&current->thread.regs));
+}
+
+/*
+ * Atomically swap in the new signal mask, and wait for a signal.
+ */
+long sys_sigsuspend(int history0, int history1, old_sigset_t mask)
+{
+	mask &= _BLOCKABLE;
+	spin_lock_irq(&current->sighand->siglock);
+	current->saved_sigmask = current->blocked;
+	siginitset(&current->blocked, mask);
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	current->state = TASK_INTERRUPTIBLE;
+	schedule();
+	set_thread_flag(TIF_RESTORE_SIGMASK);
+	return -ERESTARTNOHAND;
+}
+
+long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss)
+{
+	return(do_sigaltstack(uss, uoss, PT_REGS_SP(&current->thread.regs)));
+}
diff -urN linux-2.6.18-rc1/arch/um/kernel/signal_kern.c linux-2.6.18-rc2/arch/um/kernel/signal_kern.c
--- linux-2.6.18-rc1/arch/um/kernel/signal_kern.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/signal_kern.c	1970-01-01 00:00:00.000000000 +0000
@@ -1,191 +0,0 @@
-/* 
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#include "linux/config.h"
-#include "linux/stddef.h"
-#include "linux/sys.h"
-#include "linux/sched.h"
-#include "linux/wait.h"
-#include "linux/kernel.h"
-#include "linux/smp_lock.h"
-#include "linux/module.h"
-#include "linux/slab.h"
-#include "linux/tty.h"
-#include "linux/binfmts.h"
-#include "linux/ptrace.h"
-#include "asm/signal.h"
-#include "asm/uaccess.h"
-#include "asm/unistd.h"
-#include "user_util.h"
-#include "asm/ucontext.h"
-#include "kern_util.h"
-#include "signal_kern.h"
-#include "kern.h"
-#include "frame_kern.h"
-#include "sigcontext.h"
-#include "mode.h"
-
-EXPORT_SYMBOL(block_signals);
-EXPORT_SYMBOL(unblock_signals);
-
-#define _S(nr) (1<<((nr)-1))
-
-#define _BLOCKABLE (~(_S(SIGKILL) | _S(SIGSTOP)))
-
-/*
- * OK, we're invoking a handler
- */	
-static int handle_signal(struct pt_regs *regs, unsigned long signr,
-			 struct k_sigaction *ka, siginfo_t *info,
-			 sigset_t *oldset)
-{
-	unsigned long sp;
-	int err;
-
-	/* Always make any pending restarted system calls return -EINTR */
-	current_thread_info()->restart_block.fn = do_no_restart_syscall;
-
-	/* Did we come from a system call? */
-	if(PT_REGS_SYSCALL_NR(regs) >= 0){
-		/* If so, check system call restarting.. */
-		switch(PT_REGS_SYSCALL_RET(regs)){
-		case -ERESTART_RESTARTBLOCK:
-		case -ERESTARTNOHAND:
-			PT_REGS_SYSCALL_RET(regs) = -EINTR;
-			break;
-
-		case -ERESTARTSYS:
-			if (!(ka->sa.sa_flags & SA_RESTART)) {
-				PT_REGS_SYSCALL_RET(regs) = -EINTR;
-				break;
-			}
-		/* fallthrough */
-		case -ERESTARTNOINTR:
-			PT_REGS_RESTART_SYSCALL(regs);
-			PT_REGS_ORIG_SYSCALL(regs) = PT_REGS_SYSCALL_NR(regs);
-			break;
-		}
-	}
-
-	sp = PT_REGS_SP(regs);
-	if((ka->sa.sa_flags & SA_ONSTACK) && (sas_ss_flags(sp) == 0))
-		sp = current->sas_ss_sp + current->sas_ss_size;
-
-#ifdef CONFIG_ARCH_HAS_SC_SIGNALS
-	if(!(ka->sa.sa_flags & SA_SIGINFO))
-		err = setup_signal_stack_sc(sp, signr, ka, regs, oldset);
-	else
-#endif
-		err = setup_signal_stack_si(sp, signr, ka, regs, info, oldset);
-
-	if(err){
-		spin_lock_irq(&current->sighand->siglock);
-		current->blocked = *oldset;
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-		force_sigsegv(signr, current);
-	} else {
-		spin_lock_irq(&current->sighand->siglock);
-		sigorsets(&current->blocked, &current->blocked, 
-			  &ka->sa.sa_mask);
-		 if(!(ka->sa.sa_flags & SA_NODEFER))
-			sigaddset(&current->blocked, signr);
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-	}
-
-	return err;
-}
-
-static int kern_do_signal(struct pt_regs *regs)
-{
-	struct k_sigaction ka_copy;
-	siginfo_t info;
-	sigset_t *oldset;
-	int sig, handled_sig = 0;
-
-	if (test_thread_flag(TIF_RESTORE_SIGMASK))
-		oldset = &current->saved_sigmask;
-	else
-		oldset = &current->blocked;
-
-	while((sig = get_signal_to_deliver(&info, &ka_copy, regs, NULL)) > 0){
-		handled_sig = 1;
-		/* Whee!  Actually deliver the signal.  */
-		if(!handle_signal(regs, sig, &ka_copy, &info, oldset)){
-			/* a signal was successfully delivered; the saved
-			 * sigmask will have been stored in the signal frame,
-			 * and will be restored by sigreturn, so we can simply
-			 * clear the TIF_RESTORE_SIGMASK flag */
-			if (test_thread_flag(TIF_RESTORE_SIGMASK))
-				clear_thread_flag(TIF_RESTORE_SIGMASK);
-			break;
-		}
-	}
-
-	/* Did we come from a system call? */
-	if(!handled_sig && (PT_REGS_SYSCALL_NR(regs) >= 0)){
-		/* Restart the system call - no handlers present */
-		switch(PT_REGS_SYSCALL_RET(regs)){
-		case -ERESTARTNOHAND:
-		case -ERESTARTSYS:
-		case -ERESTARTNOINTR:
-			PT_REGS_ORIG_SYSCALL(regs) = PT_REGS_SYSCALL_NR(regs);
-			PT_REGS_RESTART_SYSCALL(regs);
-			break;
-		case -ERESTART_RESTARTBLOCK:
-			PT_REGS_SYSCALL_RET(regs) = __NR_restart_syscall;
-			PT_REGS_RESTART_SYSCALL(regs);
-			break;
- 		}
-	}
-
-	/* This closes a way to execute a system call on the host.  If
-	 * you set a breakpoint on a system call instruction and singlestep
-	 * from it, the tracing thread used to PTRACE_SINGLESTEP the process
-	 * rather than PTRACE_SYSCALL it, allowing the system call to execute
-	 * on the host.  The tracing thread will check this flag and 
-	 * PTRACE_SYSCALL if necessary.
-	 */
-	if(current->ptrace & PT_DTRACE)
-		current->thread.singlestep_syscall =
-			is_syscall(PT_REGS_IP(&current->thread.regs));
-
-	/* if there's no signal to deliver, we just put the saved sigmask
-	 * back */
-	if (!handled_sig && test_thread_flag(TIF_RESTORE_SIGMASK)) {
-		clear_thread_flag(TIF_RESTORE_SIGMASK);
-		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
-	}
-	return(handled_sig);
-}
-
-int do_signal(void)
-{
-	return(kern_do_signal(&current->thread.regs));
-}
-
-/*
- * Atomically swap in the new signal mask, and wait for a signal.
- */
-long sys_sigsuspend(int history0, int history1, old_sigset_t mask)
-{
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
-	current->saved_sigmask = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-	set_thread_flag(TIF_RESTORE_SIGMASK);
-	return -ERESTARTNOHAND;
-}
-
-long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss)
-{
-	return(do_sigaltstack(uss, uoss, PT_REGS_SP(&current->thread.regs)));
-}
diff -urN linux-2.6.18-rc1/arch/um/kernel/skas/mem.c linux-2.6.18-rc2/arch/um/kernel/skas/mem.c
--- linux-2.6.18-rc1/arch/um/kernel/skas/mem.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/skas/mem.c	2006-07-15 22:34:47.117490309 +0000
@@ -9,31 +9,19 @@
 #include "mem_user.h"
 #include "skas.h"
 
-unsigned long set_task_sizes_skas(int arg, unsigned long *host_size_out, 
-				  unsigned long *task_size_out)
+unsigned long set_task_sizes_skas(unsigned long *task_size_out)
 {
 	/* Round up to the nearest 4M */
-	unsigned long top = ROUND_4M((unsigned long) &arg);
+	unsigned long host_task_size = ROUND_4M((unsigned long)
+						&host_task_size);
 
 #ifdef CONFIG_HOST_TASK_SIZE
-	*host_size_out = CONFIG_HOST_TASK_SIZE;
+	*host_size_out = ROUND_4M(CONFIG_HOST_TASK_SIZE);
 	*task_size_out = CONFIG_HOST_TASK_SIZE;
 #else
-	*host_size_out = top;
 	if (!skas_needs_stub)
-		*task_size_out = top;
+		*task_size_out = host_task_size;
 	else *task_size_out = CONFIG_STUB_START & PGDIR_MASK;
 #endif
-	return(((unsigned long) set_task_sizes_skas) & ~0xffffff);
+	return host_task_size;
 }
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff -urN linux-2.6.18-rc1/arch/um/kernel/skas/process_kern.c linux-2.6.18-rc2/arch/um/kernel/skas/process_kern.c
--- linux-2.6.18-rc1/arch/um/kernel/skas/process_kern.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/skas/process_kern.c	2006-07-15 22:34:47.117490309 +0000
@@ -177,7 +177,7 @@
 	if(proc_mm)
 		userspace_pid[0] = start_userspace(0);
 
-	init_new_thread_signals(1);
+	init_new_thread_signals();
 
 	init_task.thread.request.u.thread.proc = start_kernel_proc;
 	init_task.thread.request.u.thread.arg = NULL;
diff -urN linux-2.6.18-rc1/arch/um/kernel/skas/syscall.c linux-2.6.18-rc2/arch/um/kernel/skas/syscall.c
--- linux-2.6.18-rc1/arch/um/kernel/skas/syscall.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/skas/syscall.c	2006-07-15 22:34:47.117490309 +0000
@@ -18,11 +18,7 @@
 	struct pt_regs *regs = container_of(r, struct pt_regs, regs);
 	long result;
 	int syscall;
-#ifdef UML_CONFIG_SYSCALL_DEBUG
-  	int index;
 
-  	index = record_syscall_start(UPT_SYSCALL_NR(r));
-#endif
 	syscall_trace(r, 0);
 
 	current->thread.nsyscalls++;
@@ -44,7 +40,4 @@
 	REGS_SET_SYSCALL_RETURN(r->skas.regs, result);
 
 	syscall_trace(r, 1);
-#ifdef UML_CONFIG_SYSCALL_DEBUG
-  	record_syscall_end(index, result);
-#endif
 }
diff -urN linux-2.6.18-rc1/arch/um/kernel/syscall.c linux-2.6.18-rc2/arch/um/kernel/syscall.c
--- linux-2.6.18-rc1/arch/um/kernel/syscall.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/syscall.c	2006-07-15 22:34:47.117490309 +0000
@@ -1,36 +1,166 @@
 /*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2003 Jeff Dike (jdike@addtoit.com)
  * Licensed under the GPL
  */
 
+#include "linux/sched.h"
+#include "linux/file.h"
+#include "linux/smp_lock.h"
+#include "linux/mm.h"
+#include "linux/utsname.h"
+#include "linux/msg.h"
+#include "linux/shm.h"
+#include "linux/sys.h"
+#include "linux/syscalls.h"
+#include "linux/unistd.h"
+#include "linux/slab.h"
+#include "linux/utime.h"
+#include "asm/mman.h"
+#include "asm/uaccess.h"
 #include "kern_util.h"
-#include "syscall.h"
-#include "os.h"
+#include "user_util.h"
+#include "sysdep/syscalls.h"
+#include "mode_kern.h"
+#include "choose-mode.h"
 
-struct {
-	int syscall;
-	int pid;
-	long result;
-	unsigned long long start;
-	unsigned long long end;
-} syscall_record[1024];
+/*  Unlocked, I don't care if this is a bit off */
+int nsyscalls = 0;
 
-int record_syscall_start(int syscall)
+long sys_fork(void)
 {
-	int max, index;
+	long ret;
 
-	max = sizeof(syscall_record)/sizeof(syscall_record[0]);
-	index = next_syscall_index(max);
+	current->thread.forking = 1;
+	ret = do_fork(SIGCHLD, UPT_SP(&current->thread.regs.regs),
+		      &current->thread.regs, 0, NULL, NULL);
+	current->thread.forking = 0;
+	return(ret);
+}
+
+long sys_vfork(void)
+{
+	long ret;
+
+	current->thread.forking = 1;
+	ret = do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD,
+		      UPT_SP(&current->thread.regs.regs),
+		      &current->thread.regs, 0, NULL, NULL);
+	current->thread.forking = 0;
+	return(ret);
+}
+
+/* common code for old and new mmaps */
+long sys_mmap2(unsigned long addr, unsigned long len,
+	       unsigned long prot, unsigned long flags,
+	       unsigned long fd, unsigned long pgoff)
+{
+	long error = -EBADF;
+	struct file * file = NULL;
 
-	syscall_record[index].syscall = syscall;
-	syscall_record[index].pid = current_pid();
-	syscall_record[index].result = 0xdeadbeef;
-	syscall_record[index].start = os_nsecs();
-	return(index);
+	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+	if (!(flags & MAP_ANONYMOUS)) {
+		file = fget(fd);
+		if (!file)
+			goto out;
+	}
+
+	down_write(&current->mm->mmap_sem);
+	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
+	up_write(&current->mm->mmap_sem);
+
+	if (file)
+		fput(file);
+ out:
+	return error;
 }
 
-void record_syscall_end(int index, long result)
+long old_mmap(unsigned long addr, unsigned long len,
+	      unsigned long prot, unsigned long flags,
+	      unsigned long fd, unsigned long offset)
 {
-	syscall_record[index].result = result;
-	syscall_record[index].end = os_nsecs();
+	long err = -EINVAL;
+	if (offset & ~PAGE_MASK)
+		goto out;
+
+	err = sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
+ out:
+	return err;
+}
+/*
+ * sys_pipe() is the normal C calling standard for creating
+ * a pipe. It's not the way unix traditionally does this, though.
+ */
+long sys_pipe(unsigned long __user * fildes)
+{
+        int fd[2];
+        long error;
+
+        error = do_pipe(fd);
+        if (!error) {
+		if (copy_to_user(fildes, fd, sizeof(fd)))
+                        error = -EFAULT;
+        }
+        return error;
+}
+
+
+long sys_uname(struct old_utsname __user * name)
+{
+	long err;
+	if (!name)
+		return -EFAULT;
+	down_read(&uts_sem);
+	err = copy_to_user(name, &system_utsname, sizeof (*name));
+	up_read(&uts_sem);
+	return err?-EFAULT:0;
+}
+
+long sys_olduname(struct oldold_utsname __user * name)
+{
+	long error;
+
+	if (!name)
+		return -EFAULT;
+	if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname)))
+		return -EFAULT;
+
+  	down_read(&uts_sem);
+
+	error = __copy_to_user(&name->sysname,&system_utsname.sysname,
+			       __OLD_UTS_LEN);
+	error |= __put_user(0,name->sysname+__OLD_UTS_LEN);
+	error |= __copy_to_user(&name->nodename,&system_utsname.nodename,
+				__OLD_UTS_LEN);
+	error |= __put_user(0,name->nodename+__OLD_UTS_LEN);
+	error |= __copy_to_user(&name->release,&system_utsname.release,
+				__OLD_UTS_LEN);
+	error |= __put_user(0,name->release+__OLD_UTS_LEN);
+	error |= __copy_to_user(&name->version,&system_utsname.version,
+				__OLD_UTS_LEN);
+	error |= __put_user(0,name->version+__OLD_UTS_LEN);
+	error |= __copy_to_user(&name->machine,&system_utsname.machine,
+				__OLD_UTS_LEN);
+	error |= __put_user(0,name->machine+__OLD_UTS_LEN);
+
+	up_read(&uts_sem);
+
+	error = error ? -EFAULT : 0;
+
+	return error;
+}
+
+DEFINE_SPINLOCK(syscall_lock);
+
+static int syscall_index = 0;
+
+int next_syscall_index(int limit)
+{
+	int ret;
+
+	spin_lock(&syscall_lock);
+	ret = syscall_index;
+	if(++syscall_index == limit)
+		syscall_index = 0;
+	spin_unlock(&syscall_lock);
+	return(ret);
 }
diff -urN linux-2.6.18-rc1/arch/um/kernel/syscall_kern.c linux-2.6.18-rc2/arch/um/kernel/syscall_kern.c
--- linux-2.6.18-rc1/arch/um/kernel/syscall_kern.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/syscall_kern.c	1970-01-01 00:00:00.000000000 +0000
@@ -1,166 +0,0 @@
-/* 
- * Copyright (C) 2000 - 2003 Jeff Dike (jdike@addtoit.com)
- * Licensed under the GPL
- */
-
-#include "linux/sched.h"
-#include "linux/file.h"
-#include "linux/smp_lock.h"
-#include "linux/mm.h"
-#include "linux/utsname.h"
-#include "linux/msg.h"
-#include "linux/shm.h"
-#include "linux/sys.h"
-#include "linux/syscalls.h"
-#include "linux/unistd.h"
-#include "linux/slab.h"
-#include "linux/utime.h"
-#include "asm/mman.h"
-#include "asm/uaccess.h"
-#include "kern_util.h"
-#include "user_util.h"
-#include "sysdep/syscalls.h"
-#include "mode_kern.h"
-#include "choose-mode.h"
-
-/*  Unlocked, I don't care if this is a bit off */
-int nsyscalls = 0;
-
-long sys_fork(void)
-{
-	long ret;
-
-	current->thread.forking = 1;
-	ret = do_fork(SIGCHLD, UPT_SP(&current->thread.regs.regs),
-		      &current->thread.regs, 0, NULL, NULL);
-	current->thread.forking = 0;
-	return(ret);
-}
-
-long sys_vfork(void)
-{
-	long ret;
-
-	current->thread.forking = 1;
-	ret = do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD,
-		      UPT_SP(&current->thread.regs.regs),
-		      &current->thread.regs, 0, NULL, NULL);
-	current->thread.forking = 0;
-	return(ret);
-}
-
-/* common code for old and new mmaps */
-long sys_mmap2(unsigned long addr, unsigned long len,
-	       unsigned long prot, unsigned long flags,
-	       unsigned long fd, unsigned long pgoff)
-{
-	long error = -EBADF;
-	struct file * file = NULL;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-
-	if (file)
-		fput(file);
- out:
-	return error;
-}
-
-long old_mmap(unsigned long addr, unsigned long len,
-	      unsigned long prot, unsigned long flags,
-	      unsigned long fd, unsigned long offset)
-{
-	long err = -EINVAL;
-	if (offset & ~PAGE_MASK)
-		goto out;
-
-	err = sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
- out:
-	return err;
-}
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way unix traditionally does this, though.
- */
-long sys_pipe(unsigned long __user * fildes)
-{
-        int fd[2];
-        long error;
-
-        error = do_pipe(fd);
-        if (!error) {
-		if (copy_to_user(fildes, fd, sizeof(fd)))
-                        error = -EFAULT;
-        }
-        return error;
-}
-
-
-long sys_uname(struct old_utsname __user * name)
-{
-	long err;
-	if (!name)
-		return -EFAULT;
-	down_read(&uts_sem);
-	err=copy_to_user(name, &system_utsname, sizeof (*name));
-	up_read(&uts_sem);
-	return err?-EFAULT:0;
-}
-
-long sys_olduname(struct oldold_utsname __user * name)
-{
-	long error;
-
-	if (!name)
-		return -EFAULT;
-	if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname)))
-		return -EFAULT;
-  
-  	down_read(&uts_sem);
-	
-	error = __copy_to_user(&name->sysname,&system_utsname.sysname,
-			       __OLD_UTS_LEN);
-	error |= __put_user(0,name->sysname+__OLD_UTS_LEN);
-	error |= __copy_to_user(&name->nodename,&system_utsname.nodename,
-				__OLD_UTS_LEN);
-	error |= __put_user(0,name->nodename+__OLD_UTS_LEN);
-	error |= __copy_to_user(&name->release,&system_utsname.release,
-				__OLD_UTS_LEN);
-	error |= __put_user(0,name->release+__OLD_UTS_LEN);
-	error |= __copy_to_user(&name->version,&system_utsname.version,
-				__OLD_UTS_LEN);
-	error |= __put_user(0,name->version+__OLD_UTS_LEN);
-	error |= __copy_to_user(&name->machine,&system_utsname.machine,
-				__OLD_UTS_LEN);
-	error |= __put_user(0,name->machine+__OLD_UTS_LEN);
-	
-	up_read(&uts_sem);
-	
-	error = error ? -EFAULT : 0;
-
-	return error;
-}
-
-DEFINE_SPINLOCK(syscall_lock);
-
-static int syscall_index = 0;
-
-int next_syscall_index(int limit)
-{
-	int ret;
-
-	spin_lock(&syscall_lock);
-	ret = syscall_index;
-	if(++syscall_index == limit)
-		syscall_index = 0;
-	spin_unlock(&syscall_lock);
-	return(ret);
-}
diff -urN linux-2.6.18-rc1/arch/um/kernel/time.c linux-2.6.18-rc2/arch/um/kernel/time.c
--- linux-2.6.18-rc1/arch/um/kernel/time.c	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/time.c	2006-07-15 22:34:47.117490309 +0000
@@ -0,0 +1,182 @@
+/*
+ * Copyright (C) 2000 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#include "linux/kernel.h"
+#include "linux/module.h"
+#include "linux/unistd.h"
+#include "linux/stddef.h"
+#include "linux/spinlock.h"
+#include "linux/time.h"
+#include "linux/sched.h"
+#include "linux/interrupt.h"
+#include "linux/init.h"
+#include "linux/delay.h"
+#include "linux/hrtimer.h"
+#include "asm/irq.h"
+#include "asm/param.h"
+#include "asm/current.h"
+#include "kern_util.h"
+#include "user_util.h"
+#include "mode.h"
+#include "os.h"
+
+int hz(void)
+{
+	return(HZ);
+}
+
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ */
+unsigned long long sched_clock(void)
+{
+	return (unsigned long long)jiffies_64 * (1000000000 / HZ);
+}
+
+/* Changed at early boot */
+int timer_irq_inited = 0;
+
+static unsigned long long prev_nsecs;
+#ifdef CONFIG_UML_REAL_TIME_CLOCK
+static long long delta;   		/* Deviation per interval */
+#endif
+
+void timer_irq(union uml_pt_regs *regs)
+{
+	unsigned long long ticks = 0;
+
+#ifdef CONFIG_UML_REAL_TIME_CLOCK
+	if(prev_nsecs){
+		/* We've had 1 tick */
+		unsigned long long nsecs = os_nsecs();
+
+		delta += nsecs - prev_nsecs;
+		prev_nsecs = nsecs;
+
+		/* Protect against the host clock being set backwards */
+		if(delta < 0)
+			delta = 0;
+
+		ticks += (delta * HZ) / BILLION;
+		delta -= (ticks * BILLION) / HZ;
+	}
+	else prev_nsecs = os_nsecs();
+#else
+	ticks = 1;
+#endif
+	while(ticks > 0){
+		do_IRQ(TIMER_IRQ, regs);
+		ticks--;
+	}
+}
+
+static DEFINE_SPINLOCK(timer_spinlock);
+
+static unsigned long long local_offset = 0;
+
+static inline unsigned long long get_time(void)
+{
+	unsigned long long nsecs;
+	unsigned long flags;
+
+	spin_lock_irqsave(&timer_spinlock, flags);
+	nsecs = os_nsecs();
+	nsecs += local_offset;
+	spin_unlock_irqrestore(&timer_spinlock, flags);
+
+	return nsecs;
+}
+
+irqreturn_t um_timer(int irq, void *dev, struct pt_regs *regs)
+{
+	unsigned long long nsecs;
+	unsigned long flags;
+
+	write_seqlock_irqsave(&xtime_lock, flags);
+
+	do_timer(regs);
+
+	nsecs = get_time() + local_offset;
+	xtime.tv_sec = nsecs / NSEC_PER_SEC;
+	xtime.tv_nsec = nsecs - xtime.tv_sec * NSEC_PER_SEC;
+
+	write_sequnlock_irqrestore(&xtime_lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static void register_timer(void)
+{
+	int err;
+
+	err = request_irq(TIMER_IRQ, um_timer, IRQF_DISABLED, "timer", NULL);
+	if(err != 0)
+		printk(KERN_ERR "timer_init : request_irq failed - "
+		       "errno = %d\n", -err);
+
+	timer_irq_inited = 1;
+
+	user_time_init();
+}
+
+extern void (*late_time_init)(void);
+
+void time_init(void)
+{
+	long long nsecs;
+
+	nsecs = os_nsecs();
+	set_normalized_timespec(&wall_to_monotonic, -nsecs / BILLION,
+				-nsecs % BILLION);
+	late_time_init = register_timer;
+}
+
+void do_gettimeofday(struct timeval *tv)
+{
+	unsigned long long nsecs = get_time();
+
+	tv->tv_sec = nsecs / NSEC_PER_SEC;
+	/* Careful about calculations here - this was originally done as
+	 * (nsecs - tv->tv_sec * NSEC_PER_SEC) / NSEC_PER_USEC
+	 * which gave bogus (> 1000000) values.  Dunno why, suspect gcc
+	 * (4.0.0) miscompiled it, or there's a subtle 64/32-bit conversion
+	 * problem that I missed.
+	 */
+	nsecs -= tv->tv_sec * NSEC_PER_SEC;
+	tv->tv_usec = (unsigned long) nsecs / NSEC_PER_USEC;
+}
+
+static inline void set_time(unsigned long long nsecs)
+{
+	unsigned long long now;
+	unsigned long flags;
+
+	spin_lock_irqsave(&timer_spinlock, flags);
+	now = os_nsecs();
+	local_offset = nsecs - now;
+	spin_unlock_irqrestore(&timer_spinlock, flags);
+
+	clock_was_set();
+}
+
+int do_settimeofday(struct timespec *tv)
+{
+	set_time((unsigned long long) tv->tv_sec * NSEC_PER_SEC + tv->tv_nsec);
+
+	return 0;
+}
+
+void timer_handler(int sig, union uml_pt_regs *regs)
+{
+	local_irq_disable();
+	irq_enter();
+	update_process_times(CHOOSE_MODE(
+	                     (UPT_SC(regs) && user_context(UPT_SP(regs))),
+			     (regs)->skas.is_user));
+	irq_exit();
+	local_irq_enable();
+	if(current_thread->cpu == 0)
+		timer_irq(regs);
+}
diff -urN linux-2.6.18-rc1/arch/um/kernel/time_kern.c linux-2.6.18-rc2/arch/um/kernel/time_kern.c
--- linux-2.6.18-rc1/arch/um/kernel/time_kern.c	2006-07-15 22:34:41.884922323 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/time_kern.c	1970-01-01 00:00:00.000000000 +0000
@@ -1,206 +0,0 @@
-/*
- * Copyright (C) 2000 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#include "linux/kernel.h"
-#include "linux/module.h"
-#include "linux/unistd.h"
-#include "linux/stddef.h"
-#include "linux/spinlock.h"
-#include "linux/time.h"
-#include "linux/sched.h"
-#include "linux/interrupt.h"
-#include "linux/init.h"
-#include "linux/delay.h"
-#include "linux/hrtimer.h"
-#include "asm/irq.h"
-#include "asm/param.h"
-#include "asm/current.h"
-#include "kern_util.h"
-#include "user_util.h"
-#include "mode.h"
-#include "os.h"
-
-int hz(void)
-{
-	return(HZ);
-}
-
-/*
- * Scheduler clock - returns current time in nanosec units.
- */
-unsigned long long sched_clock(void)
-{
-	return (unsigned long long)jiffies_64 * (1000000000 / HZ);
-}
-
-/* Changed at early boot */
-int timer_irq_inited = 0;
-
-static int first_tick;
-static unsigned long long prev_nsecs;
-#ifdef CONFIG_UML_REAL_TIME_CLOCK
-static long long delta;   		/* Deviation per interval */
-#endif
-
-void timer_irq(union uml_pt_regs *regs)
-{
-	unsigned long long ticks = 0;
-
-	if(!timer_irq_inited){
-		/* This is to ensure that ticks don't pile up when
-		 * the timer handler is suspended */
-		first_tick = 0;
-		return;
-	}
-
-	if(first_tick){
-#ifdef CONFIG_UML_REAL_TIME_CLOCK
-		/* We've had 1 tick */
-		unsigned long long nsecs = os_nsecs();
-
-		delta += nsecs - prev_nsecs;
-		prev_nsecs = nsecs;
-
-		/* Protect against the host clock being set backwards */
-		if(delta < 0)
-			delta = 0;
-
-		ticks += (delta * HZ) / BILLION;
-		delta -= (ticks * BILLION) / HZ;
-#else
-		ticks = 1;
-#endif
-	}
-	else {
-		prev_nsecs = os_nsecs();
-		first_tick = 1;
-	}
-
-	while(ticks > 0){
-		do_IRQ(TIMER_IRQ, regs);
-		ticks--;
-	}
-}
-
-
-void time_init_kern(void)
-{
-	long long nsecs;
-
-	nsecs = os_nsecs();
-	set_normalized_timespec(&wall_to_monotonic, -nsecs / BILLION,
-				-nsecs % BILLION);
-}
-
-void do_boot_timer_handler(struct sigcontext * sc)
-{
-	unsigned long flags;
-	struct pt_regs regs;
-
-	CHOOSE_MODE((void) (UPT_SC(&regs.regs) = sc),
-		    (void) (regs.regs.skas.is_user = 0));
-
-	write_seqlock_irqsave(&xtime_lock, flags);
-	do_timer(&regs);
-	write_sequnlock_irqrestore(&xtime_lock, flags);
-}
-
-static DEFINE_SPINLOCK(timer_spinlock);
-
-static unsigned long long local_offset = 0;
-
-static inline unsigned long long get_time(void)
-{
-	unsigned long long nsecs;
-	unsigned long flags;
-
-	spin_lock_irqsave(&timer_spinlock, flags);
-	nsecs = os_nsecs();
-	nsecs += local_offset;
-	spin_unlock_irqrestore(&timer_spinlock, flags);
-
-	return nsecs;
-}
-
-irqreturn_t um_timer(int irq, void *dev, struct pt_regs *regs)
-{
-	unsigned long long nsecs;
-	unsigned long flags;
-
-	write_seqlock_irqsave(&xtime_lock, flags);
-
-	do_timer(regs);
-
-	nsecs = get_time() + local_offset;
-	xtime.tv_sec = nsecs / NSEC_PER_SEC;
-	xtime.tv_nsec = nsecs - xtime.tv_sec * NSEC_PER_SEC;
-
-	write_sequnlock_irqrestore(&xtime_lock, flags);
-
-	return IRQ_HANDLED;
-}
-
-void do_gettimeofday(struct timeval *tv)
-{
-	unsigned long long nsecs = get_time();
-
-	tv->tv_sec = nsecs / NSEC_PER_SEC;
-	/* Careful about calculations here - this was originally done as
-	 * (nsecs - tv->tv_sec * NSEC_PER_SEC) / NSEC_PER_USEC
-	 * which gave bogus (> 1000000) values.  Dunno why, suspect gcc
-	 * (4.0.0) miscompiled it, or there's a subtle 64/32-bit conversion
-	 * problem that I missed.
-	 */
-	nsecs -= tv->tv_sec * NSEC_PER_SEC;
-	tv->tv_usec = (unsigned long) nsecs / NSEC_PER_USEC;
-}
-
-static inline void set_time(unsigned long long nsecs)
-{
-	unsigned long long now;
-	unsigned long flags;
-
-	spin_lock_irqsave(&timer_spinlock, flags);
-	now = os_nsecs();
-	local_offset = nsecs - now;
-	spin_unlock_irqrestore(&timer_spinlock, flags);
-
-	clock_was_set();
-}
-
-int do_settimeofday(struct timespec *tv)
-{
-	set_time((unsigned long long) tv->tv_sec * NSEC_PER_SEC + tv->tv_nsec);
-
-	return 0;
-}
-
-void timer_handler(int sig, union uml_pt_regs *regs)
-{
-	local_irq_disable();
-	irq_enter();
-	update_process_times(CHOOSE_MODE(
-	                     (UPT_SC(regs) && user_context(UPT_SP(regs))),
-			     (regs)->skas.is_user));
-	irq_exit();
-	local_irq_enable();
-	if(current_thread->cpu == 0)
-		timer_irq(regs);
-}
-
-int __init timer_init(void)
-{
-	int err;
-
-	user_time_init();
-	err = request_irq(TIMER_IRQ, um_timer, IRQF_DISABLED, "timer", NULL);
-	if(err != 0)
-		printk(KERN_ERR "timer_init : request_irq failed - "
-		       "errno = %d\n", -err);
-	timer_irq_inited = 1;
-	return(0);
-}
-
-arch_initcall(timer_init);
diff -urN linux-2.6.18-rc1/arch/um/kernel/trap.c linux-2.6.18-rc2/arch/um/kernel/trap.c
--- linux-2.6.18-rc1/arch/um/kernel/trap.c	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/trap.c	2006-07-15 22:34:47.117490309 +0000
@@ -0,0 +1,251 @@
+/*
+ * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#include "linux/kernel.h"
+#include "asm/errno.h"
+#include "linux/sched.h"
+#include "linux/mm.h"
+#include "linux/spinlock.h"
+#include "linux/config.h"
+#include "linux/init.h"
+#include "linux/ptrace.h"
+#include "asm/semaphore.h"
+#include "asm/pgtable.h"
+#include "asm/pgalloc.h"
+#include "asm/tlbflush.h"
+#include "asm/a.out.h"
+#include "asm/current.h"
+#include "asm/irq.h"
+#include "sysdep/sigcontext.h"
+#include "user_util.h"
+#include "kern_util.h"
+#include "kern.h"
+#include "chan_kern.h"
+#include "mconsole_kern.h"
+#include "mem.h"
+#include "mem_kern.h"
+#include "sysdep/sigcontext.h"
+#include "sysdep/ptrace.h"
+#include "os.h"
+#ifdef CONFIG_MODE_SKAS
+#include "skas.h"
+#endif
+#include "os.h"
+
+/* Note this is constrained to return 0, -EFAULT, -EACCESS, -ENOMEM by segv(). */
+int handle_page_fault(unsigned long address, unsigned long ip,
+		      int is_write, int is_user, int *code_out)
+{
+	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma;
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte;
+	int err = -EFAULT;
+
+	*code_out = SEGV_MAPERR;
+
+	/* If the fault was during atomic operation, don't take the fault, just
+	 * fail. */
+	if (in_atomic())
+		goto out_nosemaphore;
+
+	down_read(&mm->mmap_sem);
+	vma = find_vma(mm, address);
+	if(!vma)
+		goto out;
+	else if(vma->vm_start <= address)
+		goto good_area;
+	else if(!(vma->vm_flags & VM_GROWSDOWN))
+		goto out;
+	else if(is_user && !ARCH_IS_STACKGROW(address))
+		goto out;
+	else if(expand_stack(vma, address))
+		goto out;
+
+good_area:
+	*code_out = SEGV_ACCERR;
+	if(is_write && !(vma->vm_flags & VM_WRITE))
+		goto out;
+
+	/* Don't require VM_READ|VM_EXEC for write faults! */
+        if(!is_write && !(vma->vm_flags & (VM_READ | VM_EXEC)))
+                goto out;
+
+	do {
+survive:
+		switch (handle_mm_fault(mm, vma, address, is_write)){
+		case VM_FAULT_MINOR:
+			current->min_flt++;
+			break;
+		case VM_FAULT_MAJOR:
+			current->maj_flt++;
+			break;
+		case VM_FAULT_SIGBUS:
+			err = -EACCES;
+			goto out;
+		case VM_FAULT_OOM:
+			err = -ENOMEM;
+			goto out_of_memory;
+		default:
+			BUG();
+		}
+		pgd = pgd_offset(mm, address);
+		pud = pud_offset(pgd, address);
+		pmd = pmd_offset(pud, address);
+		pte = pte_offset_kernel(pmd, address);
+	} while(!pte_present(*pte));
+	err = 0;
+	/* The below warning was added in place of
+	 *	pte_mkyoung(); if (is_write) pte_mkdirty();
+	 * If it's triggered, we'd see normally a hang here (a clean pte is
+	 * marked read-only to emulate the dirty bit).
+	 * However, the generic code can mark a PTE writable but clean on a
+	 * concurrent read fault, triggering this harmlessly. So comment it out.
+	 */
+#if 0
+	WARN_ON(!pte_young(*pte) || (is_write && !pte_dirty(*pte)));
+#endif
+	flush_tlb_page(vma, address);
+out:
+	up_read(&mm->mmap_sem);
+out_nosemaphore:
+	return(err);
+
+/*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+out_of_memory:
+	if (current->pid == 1) {
+		up_read(&mm->mmap_sem);
+		yield();
+		down_read(&mm->mmap_sem);
+		goto survive;
+	}
+	goto out;
+}
+
+void segv_handler(int sig, union uml_pt_regs *regs)
+{
+	struct faultinfo * fi = UPT_FAULTINFO(regs);
+
+	if(UPT_IS_USER(regs) && !SEGV_IS_FIXABLE(fi)){
+		bad_segv(*fi, UPT_IP(regs));
+		return;
+	}
+	segv(*fi, UPT_IP(regs), UPT_IS_USER(regs), regs);
+}
+
+struct kern_handlers handlinfo_kern = {
+	.relay_signal = relay_signal,
+	.winch = winch,
+	.bus_handler = relay_signal,
+	.page_fault = segv_handler,
+	.sigio_handler = sigio_handler,
+	.timer_handler = timer_handler
+};
+/*
+ * We give a *copy* of the faultinfo in the regs to segv.
+ * This must be done, since nesting SEGVs could overwrite
+ * the info in the regs. A pointer to the info then would
+ * give us bad data!
+ */
+unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user, void *sc)
+{
+	struct siginfo si;
+	void *catcher;
+	int err;
+        int is_write = FAULT_WRITE(fi);
+        unsigned long address = FAULT_ADDRESS(fi);
+
+        if(!is_user && (address >= start_vm) && (address < end_vm)){
+                flush_tlb_kernel_vm();
+                return(0);
+        }
+	else if(current->mm == NULL)
+		panic("Segfault with no mm");
+
+	if (SEGV_IS_FIXABLE(&fi) || SEGV_MAYBE_FIXABLE(&fi))
+		err = handle_page_fault(address, ip, is_write, is_user, &si.si_code);
+	else {
+		err = -EFAULT;
+		/* A thread accessed NULL, we get a fault, but CR2 is invalid.
+		 * This code is used in __do_copy_from_user() of TT mode. */
+		address = 0;
+	}
+
+	catcher = current->thread.fault_catcher;
+	if(!err)
+		return(0);
+	else if(catcher != NULL){
+		current->thread.fault_addr = (void *) address;
+		do_longjmp(catcher, 1);
+	}
+	else if(current->thread.fault_addr != NULL)
+		panic("fault_addr set but no fault catcher");
+        else if(!is_user && arch_fixup(ip, sc))
+		return(0);
+
+ 	if(!is_user)
+		panic("Kernel mode fault at addr 0x%lx, ip 0x%lx",
+		      address, ip);
+
+	if (err == -EACCES) {
+		si.si_signo = SIGBUS;
+		si.si_errno = 0;
+		si.si_code = BUS_ADRERR;
+		si.si_addr = (void __user *)address;
+                current->thread.arch.faultinfo = fi;
+		force_sig_info(SIGBUS, &si, current);
+	} else if (err == -ENOMEM) {
+		printk("VM: killing process %s\n", current->comm);
+		do_exit(SIGKILL);
+	} else {
+		BUG_ON(err != -EFAULT);
+		si.si_signo = SIGSEGV;
+		si.si_addr = (void __user *) address;
+                current->thread.arch.faultinfo = fi;
+		force_sig_info(SIGSEGV, &si, current);
+	}
+	return(0);
+}
+
+void bad_segv(struct faultinfo fi, unsigned long ip)
+{
+	struct siginfo si;
+
+	si.si_signo = SIGSEGV;
+	si.si_code = SEGV_ACCERR;
+	si.si_addr = (void __user *) FAULT_ADDRESS(fi);
+	current->thread.arch.faultinfo = fi;
+	force_sig_info(SIGSEGV, &si, current);
+}
+
+void relay_signal(int sig, union uml_pt_regs *regs)
+{
+	if(arch_handle_signal(sig, regs)) return;
+	if(!UPT_IS_USER(regs))
+		panic("Kernel mode signal %d", sig);
+        current->thread.arch.faultinfo = *UPT_FAULTINFO(regs);
+	force_sig(sig, current);
+}
+
+void bus_handler(int sig, union uml_pt_regs *regs)
+{
+	if(current->thread.fault_catcher != NULL)
+		do_longjmp(current->thread.fault_catcher, 1);
+	else relay_signal(sig, regs);
+}
+
+void winch(int sig, union uml_pt_regs *regs)
+{
+	do_IRQ(WINCH_IRQ, regs);
+}
+
+void trap_init(void)
+{
+}
diff -urN linux-2.6.18-rc1/arch/um/kernel/trap_kern.c linux-2.6.18-rc2/arch/um/kernel/trap_kern.c
--- linux-2.6.18-rc1/arch/um/kernel/trap_kern.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/trap_kern.c	1970-01-01 00:00:00.000000000 +0000
@@ -1,251 +0,0 @@
-/*
- * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#include "linux/kernel.h"
-#include "asm/errno.h"
-#include "linux/sched.h"
-#include "linux/mm.h"
-#include "linux/spinlock.h"
-#include "linux/config.h"
-#include "linux/init.h"
-#include "linux/ptrace.h"
-#include "asm/semaphore.h"
-#include "asm/pgtable.h"
-#include "asm/pgalloc.h"
-#include "asm/tlbflush.h"
-#include "asm/a.out.h"
-#include "asm/current.h"
-#include "asm/irq.h"
-#include "sysdep/sigcontext.h"
-#include "user_util.h"
-#include "kern_util.h"
-#include "kern.h"
-#include "chan_kern.h"
-#include "mconsole_kern.h"
-#include "mem.h"
-#include "mem_kern.h"
-#include "sysdep/sigcontext.h"
-#include "sysdep/ptrace.h"
-#include "os.h"
-#ifdef CONFIG_MODE_SKAS
-#include "skas.h"
-#endif
-#include "os.h"
-
-/* Note this is constrained to return 0, -EFAULT, -EACCESS, -ENOMEM by segv(). */
-int handle_page_fault(unsigned long address, unsigned long ip, 
-		      int is_write, int is_user, int *code_out)
-{
-	struct mm_struct *mm = current->mm;
-	struct vm_area_struct *vma;
-	pgd_t *pgd;
-	pud_t *pud;
-	pmd_t *pmd;
-	pte_t *pte;
-	int err = -EFAULT;
-
-	*code_out = SEGV_MAPERR;
-
-	/* If the fault was during atomic operation, don't take the fault, just
-	 * fail. */
-	if (in_atomic())
-		goto out_nosemaphore;
-
-	down_read(&mm->mmap_sem);
-	vma = find_vma(mm, address);
-	if(!vma) 
-		goto out;
-	else if(vma->vm_start <= address) 
-		goto good_area;
-	else if(!(vma->vm_flags & VM_GROWSDOWN)) 
-		goto out;
-	else if(is_user && !ARCH_IS_STACKGROW(address))
-		goto out;
-	else if(expand_stack(vma, address)) 
-		goto out;
-
-good_area:
-	*code_out = SEGV_ACCERR;
-	if(is_write && !(vma->vm_flags & VM_WRITE)) 
-		goto out;
-
-	/* Don't require VM_READ|VM_EXEC for write faults! */
-        if(!is_write && !(vma->vm_flags & (VM_READ | VM_EXEC)))
-                goto out;
-
-	do {
-survive:
-		switch (handle_mm_fault(mm, vma, address, is_write)){
-		case VM_FAULT_MINOR:
-			current->min_flt++;
-			break;
-		case VM_FAULT_MAJOR:
-			current->maj_flt++;
-			break;
-		case VM_FAULT_SIGBUS:
-			err = -EACCES;
-			goto out;
-		case VM_FAULT_OOM:
-			err = -ENOMEM;
-			goto out_of_memory;
-		default:
-			BUG();
-		}
-		pgd = pgd_offset(mm, address);
-		pud = pud_offset(pgd, address);
-		pmd = pmd_offset(pud, address);
-		pte = pte_offset_kernel(pmd, address);
-	} while(!pte_present(*pte));
-	err = 0;
-	/* The below warning was added in place of
-	 *	pte_mkyoung(); if (is_write) pte_mkdirty();
-	 * If it's triggered, we'd see normally a hang here (a clean pte is
-	 * marked read-only to emulate the dirty bit).
-	 * However, the generic code can mark a PTE writable but clean on a
-	 * concurrent read fault, triggering this harmlessly. So comment it out.
-	 */
-#if 0
-	WARN_ON(!pte_young(*pte) || (is_write && !pte_dirty(*pte)));
-#endif
-	flush_tlb_page(vma, address);
-out:
-	up_read(&mm->mmap_sem);
-out_nosemaphore:
-	return(err);
-
-/*
- * We ran out of memory, or some other thing happened to us that made
- * us unable to handle the page fault gracefully.
- */
-out_of_memory:
-	if (current->pid == 1) {
-		up_read(&mm->mmap_sem);
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-	goto out;
-}
-
-void segv_handler(int sig, union uml_pt_regs *regs)
-{
-	struct faultinfo * fi = UPT_FAULTINFO(regs);
-
-	if(UPT_IS_USER(regs) && !SEGV_IS_FIXABLE(fi)){
-		bad_segv(*fi, UPT_IP(regs));
-		return;
-	}
-	segv(*fi, UPT_IP(regs), UPT_IS_USER(regs), regs);
-}
-
-struct kern_handlers handlinfo_kern = {
-	.relay_signal = relay_signal,
-	.winch = winch,
-	.bus_handler = relay_signal,
-	.page_fault = segv_handler,
-	.sigio_handler = sigio_handler,
-	.timer_handler = timer_handler
-};
-/*
- * We give a *copy* of the faultinfo in the regs to segv.
- * This must be done, since nesting SEGVs could overwrite
- * the info in the regs. A pointer to the info then would
- * give us bad data!
- */
-unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user, void *sc)
-{
-	struct siginfo si;
-	void *catcher;
-	int err;
-        int is_write = FAULT_WRITE(fi);
-        unsigned long address = FAULT_ADDRESS(fi);
-
-        if(!is_user && (address >= start_vm) && (address < end_vm)){
-                flush_tlb_kernel_vm();
-                return(0);
-        }
-	else if(current->mm == NULL)
-		panic("Segfault with no mm");
-
-	if (SEGV_IS_FIXABLE(&fi) || SEGV_MAYBE_FIXABLE(&fi))
-		err = handle_page_fault(address, ip, is_write, is_user, &si.si_code);
-	else {
-		err = -EFAULT;
-		/* A thread accessed NULL, we get a fault, but CR2 is invalid.
-		 * This code is used in __do_copy_from_user() of TT mode. */
-		address = 0;
-	}
-
-	catcher = current->thread.fault_catcher;
-	if(!err)
-		return(0);
-	else if(catcher != NULL){
-		current->thread.fault_addr = (void *) address;
-		do_longjmp(catcher, 1);
-	} 
-	else if(current->thread.fault_addr != NULL)
-		panic("fault_addr set but no fault catcher");
-        else if(!is_user && arch_fixup(ip, sc))
-		return(0);
-
- 	if(!is_user) 
-		panic("Kernel mode fault at addr 0x%lx, ip 0x%lx", 
-		      address, ip);
-
-	if (err == -EACCES) {
-		si.si_signo = SIGBUS;
-		si.si_errno = 0;
-		si.si_code = BUS_ADRERR;
-		si.si_addr = (void __user *)address;
-                current->thread.arch.faultinfo = fi;
-		force_sig_info(SIGBUS, &si, current);
-	} else if (err == -ENOMEM) {
-		printk("VM: killing process %s\n", current->comm);
-		do_exit(SIGKILL);
-	} else {
-		BUG_ON(err != -EFAULT);
-		si.si_signo = SIGSEGV;
-		si.si_addr = (void __user *) address;
-                current->thread.arch.faultinfo = fi;
-		force_sig_info(SIGSEGV, &si, current);
-	}
-	return(0);
-}
-
-void bad_segv(struct faultinfo fi, unsigned long ip)
-{
-	struct siginfo si;
-
-	si.si_signo = SIGSEGV;
-	si.si_code = SEGV_ACCERR;
-	si.si_addr = (void __user *) FAULT_ADDRESS(fi);
-	current->thread.arch.faultinfo = fi;
-	force_sig_info(SIGSEGV, &si, current);
-}
-
-void relay_signal(int sig, union uml_pt_regs *regs)
-{
-	if(arch_handle_signal(sig, regs)) return;
-	if(!UPT_IS_USER(regs))
-		panic("Kernel mode signal %d", sig);
-        current->thread.arch.faultinfo = *UPT_FAULTINFO(regs);
-	force_sig(sig, current);
-}
-
-void bus_handler(int sig, union uml_pt_regs *regs)
-{
-	if(current->thread.fault_catcher != NULL)
-		do_longjmp(current->thread.fault_catcher, 1);
-	else relay_signal(sig, regs);
-}
-
-void winch(int sig, union uml_pt_regs *regs)
-{
-	do_IRQ(WINCH_IRQ, regs);
-}
-
-void trap_init(void)
-{
-}
diff -urN linux-2.6.18-rc1/arch/um/kernel/tt/exec_kern.c linux-2.6.18-rc2/arch/um/kernel/tt/exec_kern.c
--- linux-2.6.18-rc1/arch/um/kernel/tt/exec_kern.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/tt/exec_kern.c	2006-07-15 22:34:47.121490743 +0000
@@ -21,7 +21,7 @@
 static int exec_tramp(void *sig_stack)
 {
 	init_new_thread_stack(sig_stack, NULL);
-	init_new_thread_signals(1);
+	init_new_thread_signals();
 	os_stop_process(os_getpid());
 	return(0);
 }
diff -urN linux-2.6.18-rc1/arch/um/kernel/tt/mem.c linux-2.6.18-rc2/arch/um/kernel/tt/mem.c
--- linux-2.6.18-rc1/arch/um/kernel/tt/mem.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/tt/mem.c	2006-07-15 22:34:47.121490743 +0000
@@ -24,22 +24,13 @@
 #define SIZE ((CONFIG_NEST_LEVEL + CONFIG_KERNEL_HALF_GIGS) * 0x20000000)
 #define START (CONFIG_TOP_ADDR - SIZE)
 
-unsigned long set_task_sizes_tt(int arg, unsigned long *host_size_out, 
-				unsigned long *task_size_out)
+unsigned long set_task_sizes_tt(unsigned long *task_size_out)
 {
+	unsigned long host_task_size;
+
 	/* Round up to the nearest 4M */
-	*host_size_out = ROUND_4M((unsigned long) &arg);
+	host_task_size = ROUND_4M((unsigned long) &host_task_size);
 	*task_size_out = START;
-	return(START);
-}
 
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
+	return host_task_size;
+}
diff -urN linux-2.6.18-rc1/arch/um/kernel/tt/process_kern.c linux-2.6.18-rc2/arch/um/kernel/tt/process_kern.c
--- linux-2.6.18-rc1/arch/um/kernel/tt/process_kern.c	2006-07-15 22:34:41.884922323 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/tt/process_kern.c	2006-07-15 22:34:47.121490743 +0000
@@ -142,7 +142,7 @@
 		schedule_tail(current->thread.prev_sched);
 	current->thread.prev_sched = NULL;
 
-	init_new_thread_signals(1);
+	init_new_thread_signals();
 	enable_timer();
 	free_page(current->thread.temp_stack);
 	set_cmdline("(kernel thread)");
diff -urN linux-2.6.18-rc1/arch/um/kernel/tt/syscall_kern.c linux-2.6.18-rc2/arch/um/kernel/tt/syscall_kern.c
--- linux-2.6.18-rc1/arch/um/kernel/tt/syscall_kern.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/tt/syscall_kern.c	2006-07-15 22:34:47.121490743 +0000
@@ -21,18 +21,11 @@
 	void *sc;
 	long result;
 	int syscall;
-#ifdef CONFIG_SYSCALL_DEBUG
-	int index;
-#endif
+
 	sc = UPT_SC(&regs->regs);
 	SC_START_SYSCALL(sc);
 
 	syscall = UPT_SYSCALL_NR(&regs->regs);
-
-#ifdef CONFIG_SYSCALL_DEBUG
-	index = record_syscall_start(syscall);
-#endif
-
 	syscall_trace(&regs->regs, 0);
 
 	current->thread.nsyscalls++;
@@ -50,7 +43,4 @@
 	SC_SET_SYSCALL_RETURN(sc, result);
 
 	syscall_trace(&regs->regs, 1);
-#ifdef CONFIG_SYSCALL_DEBUG
-  	record_syscall_end(index, result);
-#endif
 }
diff -urN linux-2.6.18-rc1/arch/um/kernel/tt/tracer.c linux-2.6.18-rc2/arch/um/kernel/tt/tracer.c
--- linux-2.6.18-rc1/arch/um/kernel/tt/tracer.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/tt/tracer.c	2006-07-15 22:34:47.121490743 +0000
@@ -188,10 +188,7 @@
 	int status, pid = 0, sig = 0, cont_type, tracing = 0, op = 0;
 	int proc_id = 0, n, err, old_tracing = 0, strace = 0;
 	int local_using_sysemu = 0;
-#ifdef UML_CONFIG_SYSCALL_DEBUG
-	unsigned long eip = 0;
-	int last_index;
-#endif
+
 	signal(SIGPIPE, SIG_IGN);
 	setup_tracer_winch();
 	tracing_pid = os_getpid();
@@ -282,23 +279,6 @@
 		else if(WIFSTOPPED(status)){
 			proc_id = pid_to_processor_id(pid);
 			sig = WSTOPSIG(status);
-#ifdef UML_CONFIG_SYSCALL_DEBUG
-			if(signal_index[proc_id] == 1024){
-				signal_index[proc_id] = 0;
-				last_index = 1023;
-			}
-			else last_index = signal_index[proc_id] - 1;
-			if(((sig == SIGPROF) || (sig == SIGVTALRM) ||
-			    (sig == SIGALRM)) &&
-			   (signal_record[proc_id][last_index].signal == sig)&&
-			   (signal_record[proc_id][last_index].pid == pid))
-				signal_index[proc_id] = last_index;
-			signal_record[proc_id][signal_index[proc_id]].pid = pid;
-			gettimeofday(&signal_record[proc_id][signal_index[proc_id]].time, NULL);
-			eip = ptrace(PTRACE_PEEKUSR, pid, PT_IP_OFFSET, 0);
-			signal_record[proc_id][signal_index[proc_id]].addr = eip;
-			signal_record[proc_id][signal_index[proc_id]++].signal = sig;
-#endif
 			if(proc_id == -1){
 				sleeping_process_signal(pid, sig);
 				continue;
diff -urN linux-2.6.18-rc1/arch/um/kernel/um_arch.c linux-2.6.18-rc2/arch/um/kernel/um_arch.c
--- linux-2.6.18-rc1/arch/um/kernel/um_arch.c	2006-07-15 22:34:41.884922323 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/um_arch.c	2006-07-15 22:34:47.121490743 +0000
@@ -330,6 +330,8 @@
 
 #define MIN_VMALLOC (32 * 1024 * 1024)
 
+extern char __binary_start;
+
 int linux_main(int argc, char **argv)
 {
 	unsigned long avail, diff;
@@ -374,8 +376,9 @@
 
 	printf("UML running in %s mode\n", mode);
 
-	uml_start = CHOOSE_MODE_PROC(set_task_sizes_tt, set_task_sizes_skas, 0,
-				     &host_task_size, &task_size);
+	uml_start = (unsigned long) &__binary_start;
+	host_task_size = CHOOSE_MODE_PROC(set_task_sizes_tt,
+					  set_task_sizes_skas, &task_size);
 
 	/*
  	 * Setting up handlers to 'sig_info' struct
@@ -395,7 +398,7 @@
 		physmem_size += UML_ROUND_UP(brk_start) - UML_ROUND_UP(&_end);
 	}
 
-	uml_physmem = uml_start;
+	uml_physmem = uml_start & PAGE_MASK;
 
 	/* Reserve up to 4M after the current brk */
 	uml_reserved = ROUND_4M(brk_start) + (1 << 22);
diff -urN linux-2.6.18-rc1/arch/um/kernel/uml.lds.S linux-2.6.18-rc2/arch/um/kernel/uml.lds.S
--- linux-2.6.18-rc1/arch/um/kernel/uml.lds.S	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/uml.lds.S	2006-07-15 22:34:47.121490743 +0000
@@ -7,13 +7,16 @@
 
 SECTIONS
 {
-  /*This must contain the right address - not quite the default ELF one.*/
+  /* This must contain the right address - not quite the default ELF one.*/
   PROVIDE (__executable_start = START);
-  . = START + SIZEOF_HEADERS;
+  /* Static binaries stick stuff here, like the sigreturn trampoline,
+   * invisibly to objdump.  So, just make __binary_start equal to the very
+   * beginning of the executable, and if there are unmapped pages after this,
+   * they are forever unusable.
+   */
+  __binary_start = START;
 
-  /* Used in arch/um/kernel/mem.c. Any memory between START and __binary_start
-   * is remapped.*/
-  __binary_start = .;
+  . = START + SIZEOF_HEADERS;
 
 #ifdef MODE_TT
   .remap_data : { UNMAP_PATH (.data .bss) }
diff -urN linux-2.6.18-rc1/arch/um/kernel/vmlinux.lds.S linux-2.6.18-rc2/arch/um/kernel/vmlinux.lds.S
--- linux-2.6.18-rc1/arch/um/kernel/vmlinux.lds.S	2006-07-15 22:34:41.884922323 +0000
+++ linux-2.6.18-rc2/arch/um/kernel/vmlinux.lds.S	2006-07-15 22:34:47.121490743 +0000
@@ -1,5 +1,3 @@
-/* in case the preprocessor is a 32bit one */
-#undef i386
 #ifdef CONFIG_LD_SCRIPT_STATIC
 #include "uml.lds.S"
 #else
diff -urN linux-2.6.18-rc1/arch/um/os-Linux/file.c linux-2.6.18-rc2/arch/um/os-Linux/file.c
--- linux-2.6.18-rc1/arch/um/os-Linux/file.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/os-Linux/file.c	2006-07-15 22:34:47.121490743 +0000
@@ -1,4 +1,4 @@
-/* 
+/*
  * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
  * Licensed under the GPL
  */
@@ -18,6 +18,7 @@
 #include "os.h"
 #include "user.h"
 #include "kern_util.h"
+#include "user_util.h"
 
 static void copy_stat(struct uml_stat *dst, struct stat64 *src)
 {
@@ -42,16 +43,13 @@
 	struct stat64 sbuf;
 	int err;
 
-	do {
-		err = fstat64(fd, &sbuf);
-	} while((err < 0) && (errno == EINTR)) ;
-
+	CATCH_EINTR(err = fstat64(fd, &sbuf));
 	if(err < 0)
-		return(-errno);
+		return -errno;
 
 	if(ubuf != NULL)
 		copy_stat(ubuf, &sbuf);
-	return(err);
+	return err;
 }
 
 int os_stat_file(const char *file_name, struct uml_stat *ubuf)
@@ -64,11 +62,11 @@
 	} while((err < 0) && (errno == EINTR)) ;
 
 	if(err < 0)
-		return(-errno);
+		return -errno;
 
 	if(ubuf != NULL)
 		copy_stat(ubuf, &sbuf);
-	return(err);
+	return err;
 }
 
 int os_access(const char* file, int mode)
@@ -80,9 +78,9 @@
 
 	err = access(file, amode);
 	if(err < 0)
-		return(-errno);
+		return -errno;
 
-	return(0);
+	return 0;
 }
 
 void os_print_error(int error, const char* str)
@@ -99,9 +97,9 @@
 
 	err = ioctl(fd, cmd, arg);
 	if(err < 0)
-		return(-errno);
+		return -errno;
 
-	return(err);
+	return err;
 }
 
 int os_window_size(int fd, int *rows, int *cols)
@@ -109,12 +107,12 @@
 	struct winsize size;
 
 	if(ioctl(fd, TIOCGWINSZ, &size) < 0)
-		return(-errno);
+		return -errno;
 
 	*rows = size.ws_row;
 	*cols = size.ws_col;
 
-	return(0);
+	return 0;
 }
 
 int os_new_tty_pgrp(int fd, int pid)
@@ -125,16 +123,16 @@
 	if(tcsetpgrp(fd, pid) < 0)
 		return -errno;
 
-	return(0);
+	return 0;
 }
 
 /* FIXME: ensure namebuf in os_get_if_name is big enough */
 int os_get_ifname(int fd, char* namebuf)
 {
 	if(ioctl(fd, SIOCGIFNAME, namebuf) < 0)
-		return(-errno);
+		return -errno;
 
-	return(0);
+	return 0;
 }
 
 int os_set_slip(int fd)
@@ -149,7 +147,7 @@
 	if(ioctl(fd, SIOCSIFENCAP, &sencap) < 0)
 		return -errno;
 
-	return(0);
+	return 0;
 }
 
 int os_set_owner(int fd, int pid)
@@ -158,10 +156,10 @@
 		int save_errno = errno;
 
 		if(fcntl(fd, F_GETOWN, 0) != pid)
-			return(-save_errno);
+			return -save_errno;
 	}
 
-	return(0);
+	return 0;
 }
 
 /* FIXME? moved wholesale from sigio_user.c to get fcntls out of that file */
@@ -192,9 +190,9 @@
 	} while((err < 0) && (errno==EINTR)) ;
 
 	if(err < 0)
-		return(-errno);
+		return -errno;
 
-	return(0);
+	return 0;
 }
 
 int os_file_type(char *file)
@@ -204,15 +202,21 @@
 
 	err = os_stat_file(file, &buf);
 	if(err < 0)
-		return(err);
+		return err;
 
-	if(S_ISDIR(buf.ust_mode)) return(OS_TYPE_DIR);
-	else if(S_ISLNK(buf.ust_mode)) return(OS_TYPE_SYMLINK);
-	else if(S_ISCHR(buf.ust_mode)) return(OS_TYPE_CHARDEV);
-	else if(S_ISBLK(buf.ust_mode)) return(OS_TYPE_BLOCKDEV);
-	else if(S_ISFIFO(buf.ust_mode)) return(OS_TYPE_FIFO);
-	else if(S_ISSOCK(buf.ust_mode)) return(OS_TYPE_SOCK);
-	else return(OS_TYPE_FILE);
+	if(S_ISDIR(buf.ust_mode))
+		return OS_TYPE_DIR;
+	else if(S_ISLNK(buf.ust_mode))
+		return OS_TYPE_SYMLINK;
+	else if(S_ISCHR(buf.ust_mode))
+		return OS_TYPE_CHARDEV;
+	else if(S_ISBLK(buf.ust_mode))
+		return OS_TYPE_BLOCKDEV;
+	else if(S_ISFIFO(buf.ust_mode))
+		return OS_TYPE_FIFO;
+	else if(S_ISSOCK(buf.ust_mode))
+		return OS_TYPE_SOCK;
+	else return OS_TYPE_FILE;
 }
 
 int os_file_mode(char *file, struct openflags *mode_out)
@@ -302,8 +306,8 @@
 
 	actual = lseek64(fd, offset, SEEK_SET);
 	if(actual != offset)
-		return(-errno);
-	return(0);
+		return -errno;
+	return 0;
 }
 
 static int fault_buffer(void *start, int len,
@@ -314,13 +318,13 @@
 
 	for(i = 0; i < len; i += page){
 		if((*copy_proc)(start + i, &c, sizeof(c)))
-			return(-EFAULT);
+			return -EFAULT;
 	}
 	if((len % page) != 0){
 		if((*copy_proc)(start + len - 1, &c, sizeof(c)))
-			return(-EFAULT);
+			return -EFAULT;
 	}
-	return(0);
+	return 0;
 }
 
 static int file_io(int fd, void *buf, int len,
@@ -334,26 +338,26 @@
 		if((n < 0) && (errno == EFAULT)){
 			err = fault_buffer(buf, len, copy_user_proc);
 			if(err)
-				return(err);
+				return err;
 			n = (*io_proc)(fd, buf, len);
 		}
 	} while((n < 0) && (errno == EINTR));
 
 	if(n < 0)
-		return(-errno);
-	return(n);
+		return -errno;
+	return n;
 }
 
 int os_read_file(int fd, void *buf, int len)
 {
-	return(file_io(fd, buf, len, (int (*)(int, void *, int)) read,
-		       copy_from_user_proc));
+	return file_io(fd, buf, len, (int (*)(int, void *, int)) read,
+		       copy_from_user_proc);
 }
 
 int os_write_file(int fd, const void *buf, int len)
 {
-	return(file_io(fd, (void *) buf, len,
-		       (int (*)(int, void *, int)) write, copy_to_user_proc));
+	return file_io(fd, (void *) buf, len,
+		       (int (*)(int, void *, int)) write, copy_to_user_proc);
 }
 
 int os_file_size(char *file, unsigned long long *size_out)
@@ -398,11 +402,11 @@
 	err = os_stat_file(file, &buf);
 	if(err < 0){
 		printk("Couldn't stat \"%s\" : err = %d\n", file, -err);
-		return(err);
+		return err;
 	}
 
 	*modtime = buf.ust_mtime;
-	return(0);
+	return 0;
 }
 
 int os_get_exec_close(int fd, int* close_on_exec)
@@ -455,7 +459,7 @@
 	if(err < 0)
 		goto error;
 
-	return(0);
+	return 0;
 
  error:
 	printk("os_pipe : Setting FD_CLOEXEC failed, err = %d\n", -err);
@@ -486,12 +490,12 @@
 	   (fcntl(fd, F_SETOWN, owner) < 0)){
 		err = -errno;
 		printk("os_set_fd_async : Failed to fcntl F_SETOWN "
-		       "(or F_SETSIG) fd %d to pid %d, errno = %d\n", fd, 
+		       "(or F_SETSIG) fd %d to pid %d, errno = %d\n", fd,
 		       owner, errno);
 		return err;
 	}
 
-	return(0);
+	return 0;
 }
 
 int os_clear_fd_async(int fd)
@@ -500,8 +504,8 @@
 
 	flags &= ~(O_ASYNC | O_NONBLOCK);
 	if(fcntl(fd, F_SETFL, flags) < 0)
-		return(-errno);
-	return(0);
+		return -errno;
+	return 0;
 }
 
 int os_set_fd_block(int fd, int blocking)
@@ -516,7 +520,7 @@
 	if(fcntl(fd, F_SETFL, flags) < 0)
 		return -errno;
 
-	return(0);
+	return 0;
 }
 
 int os_accept_connection(int fd)
@@ -524,9 +528,9 @@
 	int new;
 
 	new = accept(fd, NULL, 0);
-	if(new < 0) 
-		return(-errno);
-	return(new);
+	if(new < 0)
+		return -errno;
+	return new;
 }
 
 #ifndef SHUT_RD
@@ -550,12 +554,12 @@
 	else if(w) what = SHUT_WR;
 	else {
 		printk("os_shutdown_socket : neither r or w was set\n");
-		return(-EINVAL);
+		return -EINVAL;
 	}
 	err = shutdown(fd, what);
 	if(err < 0)
-		return(-errno);
-	return(0);
+		return -errno;
+	return 0;
 }
 
 int os_rcv_fd(int fd, int *helper_pid_out)
@@ -578,7 +582,7 @@
 
 	n = recvmsg(fd, &msg, 0);
 	if(n < 0)
-		return(-errno);
+		return -errno;
 
 	else if(n != sizeof(iov.iov_len))
 		*helper_pid_out = -1;
@@ -586,16 +590,16 @@
 	cmsg = CMSG_FIRSTHDR(&msg);
 	if(cmsg == NULL){
 		printk("rcv_fd didn't receive anything, error = %d\n", errno);
-		return(-1);
+		return -1;
 	}
-	if((cmsg->cmsg_level != SOL_SOCKET) || 
+	if((cmsg->cmsg_level != SOL_SOCKET) ||
 	   (cmsg->cmsg_type != SCM_RIGHTS)){
 		printk("rcv_fd didn't receive a descriptor\n");
-		return(-1);
+		return -1;
 	}
 
 	new = ((int *) CMSG_DATA(cmsg))[0];
-	return(new);
+	return new;
 }
 
 int os_create_unix_socket(char *file, int len, int close_on_exec)
@@ -623,7 +627,7 @@
 	if(err < 0)
 		return -errno;
 
-	return(sock);
+	return sock;
 }
 
 void os_flush_stdout(void)
@@ -654,16 +658,5 @@
 	printk("F_SETLK failed, file already locked by pid %d\n", lock.l_pid);
 	err = save;
  out:
-	return(err);
+	return err;
 }
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff -urN linux-2.6.18-rc1/arch/um/os-Linux/irq.c linux-2.6.18-rc2/arch/um/os-Linux/irq.c
--- linux-2.6.18-rc1/arch/um/os-Linux/irq.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/os-Linux/irq.c	2006-07-15 22:34:47.121490743 +0000
@@ -52,11 +52,6 @@
 	return n;
 }
 
-int os_isatty(int fd)
-{
-	return isatty(fd);
-}
-
 int os_create_pollfd(int fd, int events, void *tmp_pfd, int size_tmpfds)
 {
 	if (pollfds_num == pollfds_size) {
@@ -142,17 +137,14 @@
 
 void init_irq_signals(int on_sigstack)
 {
-	__sighandler_t h;
 	int flags;
 
 	flags = on_sigstack ? SA_ONSTACK : 0;
-	if (timer_irq_inited)
-		h = (__sighandler_t)alarm_handler;
-	else
-		h = boot_timer_handler;
 
-	set_handler(SIGVTALRM, h, flags | SA_RESTART,
-		    SIGUSR1, SIGIO, SIGWINCH, SIGALRM, -1);
+	set_handler(SIGVTALRM, (__sighandler_t) alarm_handler,
+		    flags | SA_RESTART, SIGUSR1, SIGIO, SIGWINCH, SIGALRM, -1);
+	set_handler(SIGALRM, (__sighandler_t) alarm_handler,
+		    flags | SA_RESTART, SIGUSR1, SIGIO, SIGWINCH, SIGALRM, -1);
 	set_handler(SIGIO, (__sighandler_t) sig_handler, flags | SA_RESTART,
 		    SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1);
 	signal(SIGWINCH, SIG_IGN);
diff -urN linux-2.6.18-rc1/arch/um/os-Linux/process.c linux-2.6.18-rc2/arch/um/os-Linux/process.c
--- linux-2.6.18-rc1/arch/um/os-Linux/process.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/os-Linux/process.c	2006-07-15 22:34:47.121490743 +0000
@@ -250,36 +250,35 @@
 	if(usr1_handler) set_handler(SIGUSR1, usr1_handler, flags, -1);
 }
 
-void init_new_thread_signals(int altstack)
+void init_new_thread_signals(void)
 {
-	int flags = altstack ? SA_ONSTACK : 0;
-
-	set_handler(SIGSEGV, (__sighandler_t) sig_handler, flags,
+	set_handler(SIGSEGV, (__sighandler_t) sig_handler, SA_ONSTACK,
 		    SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1);
-	set_handler(SIGTRAP, (__sighandler_t) sig_handler, flags,
+	set_handler(SIGTRAP, (__sighandler_t) sig_handler, SA_ONSTACK,
 		    SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1);
-	set_handler(SIGFPE, (__sighandler_t) sig_handler, flags,
+	set_handler(SIGFPE, (__sighandler_t) sig_handler, SA_ONSTACK,
 		    SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1);
-	set_handler(SIGILL, (__sighandler_t) sig_handler, flags,
+	set_handler(SIGILL, (__sighandler_t) sig_handler, SA_ONSTACK,
 		    SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1);
-	set_handler(SIGBUS, (__sighandler_t) sig_handler, flags,
+	set_handler(SIGBUS, (__sighandler_t) sig_handler, SA_ONSTACK,
 		    SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1);
 	set_handler(SIGUSR2, (__sighandler_t) sig_handler,
-		    flags, SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1);
+		    SA_ONSTACK, SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM,
+		    -1);
 	signal(SIGHUP, SIG_IGN);
 
-	init_irq_signals(altstack);
+	init_irq_signals(1);
 }
 
 int run_kernel_thread(int (*fn)(void *), void *arg, void **jmp_ptr)
 {
 	jmp_buf buf;
-	int n, enable;
+	int n;
 
 	*jmp_ptr = &buf;
-	n = UML_SETJMP(&buf, enable);
+	n = UML_SETJMP(&buf);
 	if(n != 0)
-		return(n);
+		return n;
 	(*fn)(arg);
-	return(0);
+	return 0;
 }
diff -urN linux-2.6.18-rc1/arch/um/os-Linux/sigio.c linux-2.6.18-rc2/arch/um/os-Linux/sigio.c
--- linux-2.6.18-rc1/arch/um/os-Linux/sigio.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/os-Linux/sigio.c	2006-07-15 22:34:47.121490743 +0000
@@ -43,13 +43,13 @@
 /* Protected by sigio_lock().  Used by the sigio thread, but the UML thread
  * synchronizes with it.
  */
-struct pollfds current_poll = {
+static struct pollfds current_poll = {
 	.poll  		= NULL,
 	.size 		= 0,
 	.used 		= 0
 };
 
-struct pollfds next_poll = {
+static struct pollfds next_poll = {
 	.poll  		= NULL,
 	.size 		= 0,
 	.used 		= 0
@@ -156,7 +156,7 @@
 	set_signals(flags);
 }
 
-int add_sigio_fd(int fd, int read)
+static int add_sigio_fd(int fd, int read)
 {
 	int err = 0, i, n, events;
 
@@ -191,6 +191,13 @@
 	struct pollfd *p;
 	int err = 0, i, n = 0;
 
+	/* This is called from exitcalls elsewhere in UML - if
+	 * sigio_cleanup has already run, then update_thread will hang
+	 * or fail because the thread is no longer running.
+	 */
+	if(write_sigio_pid == -1)
+		return -EIO;
+
 	sigio_lock();
 	for(i = 0; i < current_poll.used; i++){
 		if(current_poll.poll[i].fd == fd) break;
@@ -215,7 +222,7 @@
 	update_thread();
  out:
 	sigio_unlock();
-	return(err);
+	return err;
 }
 
 static struct pollfd *setup_initial_poll(int fd)
@@ -233,7 +240,7 @@
 	return p;
 }
 
-void write_sigio_workaround(void)
+static void write_sigio_workaround(void)
 {
 	unsigned long stack;
 	struct pollfd *p;
@@ -314,10 +321,24 @@
 	close(l_write_sigio_fds[1]);
 }
 
-void sigio_cleanup(void)
+void maybe_sigio_broken(int fd, int read)
+{
+	if(!isatty(fd))
+		return;
+
+	if((read || pty_output_sigio) && (!read || pty_close_sigio))
+		return;
+
+	write_sigio_workaround();
+	add_sigio_fd(fd, read);
+}
+
+static void sigio_cleanup(void)
 {
 	if(write_sigio_pid != -1){
 		os_kill_process(write_sigio_pid, 1);
 		write_sigio_pid = -1;
 	}
 }
+
+__uml_exitcall(sigio_cleanup);
diff -urN linux-2.6.18-rc1/arch/um/os-Linux/signal.c linux-2.6.18-rc2/arch/um/os-Linux/signal.c
--- linux-2.6.18-rc1/arch/um/os-Linux/signal.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/os-Linux/signal.c	2006-07-15 22:34:47.121490743 +0000
@@ -106,29 +106,6 @@
 	set_signals(enabled);
 }
 
-extern void do_boot_timer_handler(struct sigcontext * sc);
-
-void boot_timer_handler(ARCH_SIGHDLR_PARAM)
-{
-	struct sigcontext *sc;
-	int enabled;
-
-	ARCH_GET_SIGCONTEXT(sc, sig);
-
-	enabled = signals_enabled;
-	if(!enabled){
-		if(sig == SIGVTALRM)
-			pending |= SIGVTALRM_MASK;
-		else pending |= SIGALRM_MASK;
-		return;
-	}
-
-	block_signals();
-
-	do_boot_timer_handler(sc);
-	set_signals(enabled);
-}
-
 void set_sigstack(void *sig_stack, int size)
 {
 	stack_t stack = ((stack_t) { .ss_flags	= 0,
diff -urN linux-2.6.18-rc1/arch/um/os-Linux/skas/process.c linux-2.6.18-rc2/arch/um/os-Linux/skas/process.c
--- linux-2.6.18-rc1/arch/um/os-Linux/skas/process.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/os-Linux/skas/process.c	2006-07-15 22:34:47.125491177 +0000
@@ -159,7 +159,7 @@
 
 	ptrace(PTRACE_TRACEME, 0, 0, 0);
 
-	init_new_thread_signals(1);
+	init_new_thread_signals();
 	enable_timer();
 
 	if(!proc_mm){
@@ -435,7 +435,6 @@
 {
 	unsigned long flags;
 	jmp_buf switch_buf, fork_buf;
-	int enable;
 
 	*switch_buf_ptr = &switch_buf;
 	*fork_buf_ptr = &fork_buf;
@@ -450,7 +449,7 @@
 	 */
 	flags = get_signals();
 	block_signals();
-	if(UML_SETJMP(&fork_buf, enable) == 0)
+	if(UML_SETJMP(&fork_buf) == 0)
 		new_thread_proc(stack, handler);
 
 	remove_sigstack();
@@ -467,21 +466,19 @@
 void thread_wait(void *sw, void *fb)
 {
 	jmp_buf buf, **switch_buf = sw, *fork_buf;
-	int enable;
 
 	*switch_buf = &buf;
 	fork_buf = fb;
-	if(UML_SETJMP(&buf, enable) == 0)
+	if(UML_SETJMP(&buf) == 0)
 		siglongjmp(*fork_buf, INIT_JMP_REMOVE_SIGSTACK);
 }
 
 void switch_threads(void *me, void *next)
 {
 	jmp_buf my_buf, **me_ptr = me, *next_buf = next;
-	int enable;
 
 	*me_ptr = &my_buf;
-	if(UML_SETJMP(&my_buf, enable) == 0)
+	if(UML_SETJMP(&my_buf) == 0)
 		UML_LONGJMP(next_buf, 1);
 }
 
@@ -495,14 +492,14 @@
 int start_idle_thread(void *stack, void *switch_buf_ptr, void **fork_buf_ptr)
 {
 	jmp_buf **switch_buf = switch_buf_ptr;
-	int n, enable;
+	int n;
 
 	set_handler(SIGWINCH, (__sighandler_t) sig_handler,
 		    SA_ONSTACK | SA_RESTART, SIGUSR1, SIGIO, SIGALRM,
 		    SIGVTALRM, -1);
 
 	*fork_buf_ptr = &initial_jmpbuf;
-	n = UML_SETJMP(&initial_jmpbuf, enable);
+	n = UML_SETJMP(&initial_jmpbuf);
 	switch(n){
 	case INIT_JMP_NEW_THREAD:
 		new_thread_proc((void *) stack, new_thread_handler);
@@ -529,14 +526,13 @@
 void initial_thread_cb_skas(void (*proc)(void *), void *arg)
 {
 	jmp_buf here;
-	int enable;
 
 	cb_proc = proc;
 	cb_arg = arg;
 	cb_back = &here;
 
 	block_signals();
-	if(UML_SETJMP(&here, enable) == 0)
+	if(UML_SETJMP(&here) == 0)
 		UML_LONGJMP(&initial_jmpbuf, INIT_JMP_CALLBACK);
 	unblock_signals();
 
diff -urN linux-2.6.18-rc1/arch/um/os-Linux/time.c linux-2.6.18-rc2/arch/um/os-Linux/time.c
--- linux-2.6.18-rc1/arch/um/os-Linux/time.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/os-Linux/time.c	2006-07-15 22:34:47.125491177 +0000
@@ -17,11 +17,6 @@
 #include "kern_constants.h"
 #include "os.h"
 
-/* XXX This really needs to be declared and initialized in a kernel file since
- * it's in <linux/time.h>
- */
-extern struct timespec wall_to_monotonic;
-
 static void set_interval(int timer_type)
 {
 	int usec = 1000000/hz();
@@ -71,6 +66,7 @@
 		       errno);
 }
 
+#ifdef UML_CONFIG_MODE_TT
 void uml_idle_timer(void)
 {
 	if(signal(SIGVTALRM, SIG_IGN) == SIG_ERR)
@@ -80,14 +76,7 @@
 		    SA_RESTART, SIGUSR1, SIGIO, SIGWINCH, SIGVTALRM, -1);
 	set_interval(ITIMER_REAL);
 }
-
-void time_init(void)
-{
-	if(signal(SIGVTALRM, boot_timer_handler) == SIG_ERR)
-		panic("Couldn't set SIGVTALRM handler");
-	set_interval(ITIMER_VIRTUAL);
-	time_init_kern();
-}
+#endif
 
 unsigned long long os_nsecs(void)
 {
@@ -106,15 +95,7 @@
 	nanosleep(&ts, NULL);
 }
 
-/* XXX This partly duplicates init_irq_signals */
-
 void user_time_init(void)
 {
-	set_handler(SIGVTALRM, (__sighandler_t) alarm_handler,
-		    SA_ONSTACK | SA_RESTART, SIGUSR1, SIGIO, SIGWINCH,
-		    SIGALRM, SIGUSR2, -1);
-	set_handler(SIGALRM, (__sighandler_t) alarm_handler,
-		    SA_ONSTACK | SA_RESTART, SIGUSR1, SIGIO, SIGWINCH,
-		    SIGVTALRM, SIGUSR2, -1);
 	set_interval(ITIMER_VIRTUAL);
 }
diff -urN linux-2.6.18-rc1/arch/um/os-Linux/uaccess.c linux-2.6.18-rc2/arch/um/os-Linux/uaccess.c
--- linux-2.6.18-rc1/arch/um/os-Linux/uaccess.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/um/os-Linux/uaccess.c	2006-07-15 22:34:47.125491177 +0000
@@ -14,11 +14,10 @@
 					int n), int *faulted_out)
 {
 	unsigned long *faddrp = (unsigned long *) fault_addr, ret;
-	int enable;
 
 	jmp_buf jbuf;
 	*fault_catcher = &jbuf;
-	if(UML_SETJMP(&jbuf, enable) == 0){
+	if(UML_SETJMP(&jbuf) == 0){
 		(*op)(to, from, n);
 		ret = 0;
 		*faulted_out = 0;
diff -urN linux-2.6.18-rc1/arch/x86_64/defconfig linux-2.6.18-rc2/arch/x86_64/defconfig
--- linux-2.6.18-rc1/arch/x86_64/defconfig	2006-07-15 22:34:41.892923191 +0000
+++ linux-2.6.18-rc2/arch/x86_64/defconfig	2006-07-15 22:34:47.133492046 +0000
@@ -1,11 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-git6
-# Sat Jun 24 00:52:28 2006
+# Linux kernel version: 2.6.17-git22
+# Tue Jul  4 14:24:40 2006
 #
 CONFIG_X86_64=y
 CONFIG_64BIT=y
 CONFIG_X86=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_SEMAPHORE_SLEEPERS=y
 CONFIG_MMU=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
@@ -17,6 +19,7 @@
 CONFIG_GENERIC_IOMAP=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_DMI=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -52,10 +55,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -136,10 +141,12 @@
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
+CONFIG_RESOURCES_64BIT=y
 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
 CONFIG_OUT_OF_LINE_PFN_TO_PAGE=y
 CONFIG_NR_CPUS=32
 CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_HPET_TIMER=y
 CONFIG_HPET_EMULATE_RTC=y
 CONFIG_IOMMU=y
@@ -186,6 +193,7 @@
 # CONFIG_ACPI_VIDEO is not set
 # CONFIG_ACPI_HOTKEY is not set
 CONFIG_ACPI_FAN=y
+# CONFIG_ACPI_DOCK is not set
 CONFIG_ACPI_PROCESSOR=y
 CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_THERMAL=y
@@ -200,7 +208,7 @@
 CONFIG_ACPI_SYSTEM=y
 CONFIG_X86_PM_TIMER=y
 CONFIG_ACPI_CONTAINER=y
-CONFIG_ACPI_HOTPLUG_MEMORY=y
+# CONFIG_ACPI_SBS is not set
 
 #
 # CPU Frequency scaling
@@ -801,6 +809,7 @@
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -870,6 +879,9 @@
 #
 # CONFIG_USBPCWATCHDOG is not set
 CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_INTEL=y
+CONFIG_HW_RANDOM_AMD=y
+# CONFIG_HW_RANDOM_GEODE is not set
 # CONFIG_NVRAM is not set
 CONFIG_RTC=y
 # CONFIG_DTLK is not set
@@ -886,6 +898,7 @@
 # CONFIG_AGP_VIA is not set
 # CONFIG_DRM is not set
 # CONFIG_MWAVE is not set
+# CONFIG_PC8736x_GPIO is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
 CONFIG_HPET=y
@@ -1030,8 +1043,8 @@
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
-CONFIG_VIDEO_SELECT=y
 
 #
 # Console display driver support
@@ -1039,6 +1052,7 @@
 CONFIG_VGA_CONSOLE=y
 CONFIG_VGACON_SOFT_SCROLLBACK=y
 CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256
+CONFIG_VIDEO_SELECT=y
 CONFIG_DUMMY_CONSOLE=y
 
 #
@@ -1359,6 +1373,7 @@
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1424,16 +1439,24 @@
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=18
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
@@ -1445,6 +1468,8 @@
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUG_RODATA is not set
 # CONFIG_IOMMU_DEBUG is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_DEBUG_STACK_USAGE is not set
 
 #
 # Security options
@@ -1468,3 +1493,4 @@
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
diff -urN linux-2.6.18-rc1/arch/x86_64/ia32/ia32_binfmt.c linux-2.6.18-rc2/arch/x86_64/ia32/ia32_binfmt.c
--- linux-2.6.18-rc1/arch/x86_64/ia32/ia32_binfmt.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/x86_64/ia32/ia32_binfmt.c	2006-07-15 22:34:47.133492046 +0000
@@ -182,7 +182,7 @@
 #define user user32
 
 #define __ASM_X86_64_ELF_H 1
-#define elf_read_implies_exec(ex, have_pt_gnu_stack)	(!(have_pt_gnu_stack))
+#define elf_read_implies_exec(ex, executable_stack)     (executable_stack != EXSTACK_DISABLE_X)
 //#include <asm/ia32.h>
 #include <linux/elf.h>
 
diff -urN linux-2.6.18-rc1/arch/x86_64/ia32/ptrace32.c linux-2.6.18-rc2/arch/x86_64/ia32/ptrace32.c
--- linux-2.6.18-rc1/arch/x86_64/ia32/ptrace32.c	2006-07-15 22:34:41.892923191 +0000
+++ linux-2.6.18-rc2/arch/x86_64/ia32/ptrace32.c	2006-07-15 22:34:47.133492046 +0000
@@ -202,17 +202,24 @@
 {
 	int ret;
 	compat_siginfo_t *si32 = (compat_siginfo_t *)compat_ptr(data);
+	siginfo_t ssi; 
 	siginfo_t *si = compat_alloc_user_space(sizeof(siginfo_t));
 	if (request == PTRACE_SETSIGINFO) {
-		ret = copy_siginfo_from_user32(si, si32);
+		memset(&ssi, 0, sizeof(siginfo_t));
+		ret = copy_siginfo_from_user32(&ssi, si32);
 		if (ret)
 			return ret;
+		if (copy_to_user(si, &ssi, sizeof(siginfo_t)))
+			return -EFAULT;
 	}
 	ret = sys_ptrace(request, pid, addr, (unsigned long)si);
 	if (ret)
 		return ret;
-	if (request == PTRACE_GETSIGINFO)
-		ret = copy_siginfo_to_user32(si32, si);
+	if (request == PTRACE_GETSIGINFO) {
+		if (copy_from_user(&ssi, si, sizeof(siginfo_t)))
+			return -EFAULT;
+		ret = copy_siginfo_to_user32(si32, &ssi);
+	}
 	return ret;
 }
 
diff -urN linux-2.6.18-rc1/arch/x86_64/kernel/e820.c linux-2.6.18-rc2/arch/x86_64/kernel/e820.c
--- linux-2.6.18-rc1/arch/x86_64/kernel/e820.c	2006-07-15 22:34:41.896923626 +0000
+++ linux-2.6.18-rc2/arch/x86_64/kernel/e820.c	2006-07-15 22:34:47.137492480 +0000
@@ -17,6 +17,7 @@
 #include <linux/kexec.h>
 #include <linux/module.h>
 
+#include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/e820.h>
 #include <asm/proto.h>
diff -urN linux-2.6.18-rc1/arch/x86_64/kernel/early_printk.c linux-2.6.18-rc2/arch/x86_64/kernel/early_printk.c
--- linux-2.6.18-rc1/arch/x86_64/kernel/early_printk.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/arch/x86_64/kernel/early_printk.c	2006-07-15 22:34:47.137492480 +0000
@@ -2,7 +2,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/string.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <asm/io.h>
 #include <asm/processor.h>
 #include <asm/fcntl.h>
diff -urN linux-2.6.18-rc1/arch/x86_64/kernel/mce_amd.c linux-2.6.18-rc2/arch/x86_64/kernel/mce_amd.c
--- linux-2.6.18-rc1/arch/x86_64/kernel/mce_amd.c	2006-07-15 22:34:41.900924060 +0000
+++ linux-2.6.18-rc2/arch/x86_64/kernel/mce_amd.c	2006-07-15 22:34:47.141492914 +0000
@@ -597,7 +597,7 @@
 	/* sibling symlink */
 	if (shared_bank[bank] && b->blocks->cpu != cpu) {
 		sysfs_remove_link(&per_cpu(device_mce, cpu).kobj, name);
-		per_cpu(threshold_banks, i)[bank] = NULL;
+		per_cpu(threshold_banks, cpu)[bank] = NULL;
 		return;
 	}
 
diff -urN linux-2.6.18-rc1/arch/x86_64/kernel/pci-calgary.c linux-2.6.18-rc2/arch/x86_64/kernel/pci-calgary.c
--- linux-2.6.18-rc1/arch/x86_64/kernel/pci-calgary.c	2006-07-15 22:34:41.900924060 +0000
+++ linux-2.6.18-rc2/arch/x86_64/kernel/pci-calgary.c	2006-07-15 22:34:47.145493349 +0000
@@ -1,9 +1,11 @@
 /*
  * Derived from arch/powerpc/kernel/iommu.c
  *
- * Copyright (C) 2006 Jon Mason <jdmason@us.ibm.com>, IBM Corporation
- * Copyright (C) 2006 Muli Ben-Yehuda <muli@il.ibm.com>, IBM Corporation
+ * Copyright (C) IBM Corporation, 2006
  *
+ * Author: Jon Mason <jdmason@us.ibm.com>
+ * Author: Muli Ben-Yehuda <muli@il.ibm.com>
+
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
diff -urN linux-2.6.18-rc1/arch/x86_64/kernel/setup.c linux-2.6.18-rc2/arch/x86_64/kernel/setup.c
--- linux-2.6.18-rc1/arch/x86_64/kernel/setup.c	2006-07-15 22:34:41.904924494 +0000
+++ linux-2.6.18-rc2/arch/x86_64/kernel/setup.c	2006-07-15 22:34:47.145493349 +0000
@@ -21,7 +21,7 @@
 #include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/a.out.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
 #include <linux/init.h>
diff -urN linux-2.6.18-rc1/arch/x86_64/kernel/smpboot.c linux-2.6.18-rc2/arch/x86_64/kernel/smpboot.c
--- linux-2.6.18-rc1/arch/x86_64/kernel/smpboot.c	2006-07-15 22:34:41.904924494 +0000
+++ linux-2.6.18-rc2/arch/x86_64/kernel/smpboot.c	2006-07-15 22:34:47.149493783 +0000
@@ -771,12 +771,10 @@
 	unsigned long start_rip;
 	struct create_idle c_idle = {
 		.cpu = cpu,
-		.done = COMPLETION_INITIALIZER(c_idle.done),
+		.done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
 	};
 	DECLARE_WORK(work, do_fork_idle, &c_idle);
 
-	lockdep_set_class(&c_idle.done.wait.lock, &waitqueue_lock_key);
-
 	/* allocate memory for gdts of secondary cpus. Hotplug is considered */
 	if (!cpu_gdt_descr[cpu].address &&
 		!(cpu_gdt_descr[cpu].address = get_zeroed_page(GFP_KERNEL))) {
diff -urN linux-2.6.18-rc1/arch/x86_64/kernel/tce.c linux-2.6.18-rc2/arch/x86_64/kernel/tce.c
--- linux-2.6.18-rc1/arch/x86_64/kernel/tce.c	2006-07-15 22:34:41.908924928 +0000
+++ linux-2.6.18-rc2/arch/x86_64/kernel/tce.c	2006-07-15 22:34:47.149493783 +0000
@@ -1,8 +1,10 @@
 /*
  * Derived from arch/powerpc/platforms/pseries/iommu.c
  *
- * Copyright (C) 2006 Jon Mason <jdmason@us.ibm.com>, IBM Corporation
- * Copyright (C) 2006 Muli Ben-Yehuda <muli@il.ibm.com>, IBM Corporation
+ * Copyright (C) IBM Corporation, 2006
+ *
+ * Author: Jon Mason <jdmason@us.ibm.com>
+ * Author: Muli Ben-Yehuda <muli@il.ibm.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff -urN linux-2.6.18-rc1/arch/x86_64/kernel/traps.c linux-2.6.18-rc2/arch/x86_64/kernel/traps.c
--- linux-2.6.18-rc1/arch/x86_64/kernel/traps.c	2006-07-15 22:34:41.908924928 +0000
+++ linux-2.6.18-rc2/arch/x86_64/kernel/traps.c	2006-07-15 22:34:47.149493783 +0000
@@ -76,13 +76,13 @@
 	vmalloc_sync_all();
 	return atomic_notifier_chain_register(&die_chain, nb);
 }
-EXPORT_SYMBOL(register_die_notifier);
+EXPORT_SYMBOL(register_die_notifier); /* used modular by kdb */
 
 int unregister_die_notifier(struct notifier_block *nb)
 {
 	return atomic_notifier_chain_unregister(&die_chain, nb);
 }
-EXPORT_SYMBOL(unregister_die_notifier);
+EXPORT_SYMBOL(unregister_die_notifier); /* used modular by kdb */
 
 static inline void conditional_sti(struct pt_regs *regs)
 {
diff -urN linux-2.6.18-rc1/arch/xtensa/kernel/setup.c linux-2.6.18-rc2/arch/xtensa/kernel/setup.c
--- linux-2.6.18-rc1/arch/xtensa/kernel/setup.c	2006-07-15 22:34:41.916925797 +0000
+++ linux-2.6.18-rc2/arch/xtensa/kernel/setup.c	2006-07-15 22:34:47.157494651 +0000
@@ -17,7 +17,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/proc_fs.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/bootmem.h>
 #include <linux/kernel.h>
 
diff -urN linux-2.6.18-rc1/block/blktrace.c linux-2.6.18-rc2/block/blktrace.c
--- linux-2.6.18-rc1/block/blktrace.c	2006-07-15 22:34:41.916925797 +0000
+++ linux-2.6.18-rc2/block/blktrace.c	2006-07-15 22:34:47.161495086 +0000
@@ -69,7 +69,7 @@
 /*
  * Bio action bits of interest
  */
-static u32 bio_act[3] __read_mostly = { 0, BLK_TC_ACT(BLK_TC_BARRIER), BLK_TC_ACT(BLK_TC_SYNC) };
+static u32 bio_act[5] __read_mostly = { 0, BLK_TC_ACT(BLK_TC_BARRIER), BLK_TC_ACT(BLK_TC_SYNC), 0, BLK_TC_ACT(BLK_TC_AHEAD) };
 
 /*
  * More could be added as needed, taking care to increment the decrementer
@@ -79,6 +79,8 @@
 	(((rw) & (1 << BIO_RW_BARRIER)) >> (BIO_RW_BARRIER - 0))
 #define trace_sync_bit(rw)	\
 	(((rw) & (1 << BIO_RW_SYNC)) >> (BIO_RW_SYNC - 1))
+#define trace_ahead_bit(rw)	\
+	(((rw) & (1 << BIO_RW_AHEAD)) << (BIO_RW_AHEAD - 0))
 
 /*
  * The worker for the various blk_add_trace*() types. Fills out a
@@ -100,6 +102,7 @@
 	what |= ddir_act[rw & WRITE];
 	what |= bio_act[trace_barrier_bit(rw)];
 	what |= bio_act[trace_sync_bit(rw)];
+	what |= bio_act[trace_ahead_bit(rw)];
 
 	pid = tsk->pid;
 	if (unlikely(act_log_check(bt, what, sector, pid)))
diff -urN linux-2.6.18-rc1/block/ioctl.c linux-2.6.18-rc2/block/ioctl.c
--- linux-2.6.18-rc1/block/ioctl.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/block/ioctl.c	2006-07-15 22:34:47.161495086 +0000
@@ -72,7 +72,7 @@
 			bdevp = bdget_disk(disk, part);
 			if (!bdevp)
 				return -ENOMEM;
-			mutex_lock(&bdevp->bd_mutex);
+			mutex_lock_nested(&bdevp->bd_mutex, BD_MUTEX_PARTITION);
 			if (bdevp->bd_openers) {
 				mutex_unlock(&bdevp->bd_mutex);
 				bdput(bdevp);
@@ -82,7 +82,7 @@
 			fsync_bdev(bdevp);
 			invalidate_bdev(bdevp, 0);
 
-			mutex_lock(&bdev->bd_mutex);
+			mutex_lock_nested(&bdev->bd_mutex, BD_MUTEX_WHOLE);
 			delete_partition(disk, part);
 			mutex_unlock(&bdev->bd_mutex);
 			mutex_unlock(&bdevp->bd_mutex);
diff -urN linux-2.6.18-rc1/block/ll_rw_blk.c linux-2.6.18-rc2/block/ll_rw_blk.c
--- linux-2.6.18-rc1/block/ll_rw_blk.c	2006-07-15 22:34:41.920926231 +0000
+++ linux-2.6.18-rc2/block/ll_rw_blk.c	2006-07-15 22:34:47.165495520 +0000
@@ -3491,8 +3491,8 @@
 
 void blk_rq_bio_prep(request_queue_t *q, struct request *rq, struct bio *bio)
 {
-	/* first three bits are identical in rq->flags and bio->bi_rw */
-	rq->flags |= (bio->bi_rw & 7);
+	/* first two bits are identical in rq->flags and bio->bi_rw */
+	rq->flags |= (bio->bi_rw & 3);
 
 	rq->nr_phys_segments = bio_phys_segments(q, bio);
 	rq->nr_hw_segments = bio_hw_segments(q, bio);
diff -urN linux-2.6.18-rc1/drivers/acpi/Kconfig linux-2.6.18-rc2/drivers/acpi/Kconfig
--- linux-2.6.18-rc1/drivers/acpi/Kconfig	2006-07-15 22:34:41.932927534 +0000
+++ linux-2.6.18-rc2/drivers/acpi/Kconfig	2006-07-15 22:34:47.173496388 +0000
@@ -107,7 +107,6 @@
 config ACPI_VIDEO
 	tristate "Video"
 	depends on X86
-	default y
 	help
 	  This driver implement the ACPI Extensions For Display Adapters
 	  for integrated graphics devices on motherboard, as specified in
@@ -135,8 +134,7 @@
 
 config ACPI_DOCK
 	tristate "Dock"
-	depends on !ACPI_IBM_DOCK
-	default y
+	depends on EXPERIMENTAL
 	help
 	  This driver adds support for ACPI controlled docking stations
 
@@ -214,6 +212,7 @@
 config ACPI_IBM_DOCK
 	bool "Legacy Docking Station Support"
 	depends on ACPI_IBM
+	depends on ACPI_DOCK=n
 	default n
 	---help---
 	  Allows the ibm_acpi driver to handle docking station events.
@@ -357,7 +356,6 @@
 	tristate "Smart Battery System (EXPERIMENTAL)"
 	depends on X86 && I2C
 	depends on EXPERIMENTAL
-	default y
 	help
 	  This driver adds support for the Smart Battery System.
 	  Depends on I2C (Device Drivers ---> I2C support)
diff -urN linux-2.6.18-rc1/drivers/acpi/ac.c linux-2.6.18-rc2/drivers/acpi/ac.c
--- linux-2.6.18-rc1/drivers/acpi/ac.c	2006-07-15 22:34:41.932927534 +0000
+++ linux-2.6.18-rc2/drivers/acpi/ac.c	2006-07-15 22:34:47.173496388 +0000
@@ -72,7 +72,7 @@
 	unsigned long state;
 };
 
-static struct file_operations acpi_ac_fops = {
+static const struct file_operations acpi_ac_fops = {
 	.open = acpi_ac_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
diff -urN linux-2.6.18-rc1/drivers/acpi/battery.c linux-2.6.18-rc2/drivers/acpi/battery.c
--- linux-2.6.18-rc1/drivers/acpi/battery.c	2006-07-15 22:34:41.936927968 +0000
+++ linux-2.6.18-rc2/drivers/acpi/battery.c	2006-07-15 22:34:47.177496823 +0000
@@ -557,7 +557,7 @@
 	return single_open(file, acpi_battery_read_alarm, PDE(inode)->data);
 }
 
-static struct file_operations acpi_battery_info_ops = {
+static const struct file_operations acpi_battery_info_ops = {
 	.open = acpi_battery_info_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
@@ -565,7 +565,7 @@
 	.owner = THIS_MODULE,
 };
 
-static struct file_operations acpi_battery_state_ops = {
+static const struct file_operations acpi_battery_state_ops = {
 	.open = acpi_battery_state_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
@@ -573,7 +573,7 @@
 	.owner = THIS_MODULE,
 };
 
-static struct file_operations acpi_battery_alarm_ops = {
+static const struct file_operations acpi_battery_alarm_ops = {
 	.open = acpi_battery_alarm_open_fs,
 	.read = seq_read,
 	.write = acpi_battery_write_alarm,
diff -urN linux-2.6.18-rc1/drivers/acpi/bus.c linux-2.6.18-rc2/drivers/acpi/bus.c
--- linux-2.6.18-rc1/drivers/acpi/bus.c	2006-07-15 22:34:41.936927968 +0000
+++ linux-2.6.18-rc2/drivers/acpi/bus.c	2006-07-15 22:34:47.177496823 +0000
@@ -192,8 +192,8 @@
 	/* Make sure this is a valid target state */
 
 	if (!device->flags.power_manageable) {
-		printk(KERN_DEBUG "Device `[%s]' is not power manageable",
-				device->kobj.name);
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device `[%s]' is not power manageable",
+				device->kobj.name));
 		return -ENODEV;
 	}
 	/*
diff -urN linux-2.6.18-rc1/drivers/acpi/button.c linux-2.6.18-rc2/drivers/acpi/button.c
--- linux-2.6.18-rc1/drivers/acpi/button.c	2006-07-15 22:34:41.936927968 +0000
+++ linux-2.6.18-rc2/drivers/acpi/button.c	2006-07-15 22:34:47.177496823 +0000
@@ -87,14 +87,14 @@
 	unsigned long pushed;
 };
 
-static struct file_operations acpi_button_info_fops = {
+static const struct file_operations acpi_button_info_fops = {
 	.open = acpi_button_info_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
 	.release = single_release,
 };
 
-static struct file_operations acpi_button_state_fops = {
+static const struct file_operations acpi_button_state_fops = {
 	.open = acpi_button_state_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
diff -urN linux-2.6.18-rc1/drivers/acpi/cm_sbs.c linux-2.6.18-rc2/drivers/acpi/cm_sbs.c
--- linux-2.6.18-rc1/drivers/acpi/cm_sbs.c	2006-07-15 22:34:41.936927968 +0000
+++ linux-2.6.18-rc2/drivers/acpi/cm_sbs.c	2006-07-15 22:34:47.177496823 +0000
@@ -39,50 +39,43 @@
 static struct proc_dir_entry *acpi_ac_dir;
 static struct proc_dir_entry *acpi_battery_dir;
 
-static struct semaphore cm_sbs_sem;
+static DEFINE_MUTEX(cm_sbs_mutex);
 
-static int lock_ac_dir_cnt = 0;
-static int lock_battery_dir_cnt = 0;
+static int lock_ac_dir_cnt;
+static int lock_battery_dir_cnt;
 
 struct proc_dir_entry *acpi_lock_ac_dir(void)
 {
-
-	down(&cm_sbs_sem);
-	if (!acpi_ac_dir) {
+	mutex_lock(&cm_sbs_mutex);
+	if (!acpi_ac_dir)
 		acpi_ac_dir = proc_mkdir(ACPI_AC_CLASS, acpi_root_dir);
-	}
 	if (acpi_ac_dir) {
 		lock_ac_dir_cnt++;
 	} else {
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 				  "Cannot create %s\n", ACPI_AC_CLASS));
 	}
-	up(&cm_sbs_sem);
+	mutex_unlock(&cm_sbs_mutex);
 	return acpi_ac_dir;
 }
-
 EXPORT_SYMBOL(acpi_lock_ac_dir);
 
 void acpi_unlock_ac_dir(struct proc_dir_entry *acpi_ac_dir_param)
 {
-
-	down(&cm_sbs_sem);
-	if (acpi_ac_dir_param) {
+	mutex_lock(&cm_sbs_mutex);
+	if (acpi_ac_dir_param)
 		lock_ac_dir_cnt--;
-	}
 	if (lock_ac_dir_cnt == 0 && acpi_ac_dir_param && acpi_ac_dir) {
 		remove_proc_entry(ACPI_AC_CLASS, acpi_root_dir);
 		acpi_ac_dir = 0;
 	}
-	up(&cm_sbs_sem);
+	mutex_unlock(&cm_sbs_mutex);
 }
-
 EXPORT_SYMBOL(acpi_unlock_ac_dir);
 
 struct proc_dir_entry *acpi_lock_battery_dir(void)
 {
-
-	down(&cm_sbs_sem);
+	mutex_lock(&cm_sbs_mutex);
 	if (!acpi_battery_dir) {
 		acpi_battery_dir =
 		    proc_mkdir(ACPI_BATTERY_CLASS, acpi_root_dir);
@@ -93,39 +86,28 @@
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 				  "Cannot create %s\n", ACPI_BATTERY_CLASS));
 	}
-	up(&cm_sbs_sem);
+	mutex_unlock(&cm_sbs_mutex);
 	return acpi_battery_dir;
 }
-
 EXPORT_SYMBOL(acpi_lock_battery_dir);
 
 void acpi_unlock_battery_dir(struct proc_dir_entry *acpi_battery_dir_param)
 {
-
-	down(&cm_sbs_sem);
-	if (acpi_battery_dir_param) {
+	mutex_lock(&cm_sbs_mutex);
+	if (acpi_battery_dir_param)
 		lock_battery_dir_cnt--;
-	}
 	if (lock_battery_dir_cnt == 0 && acpi_battery_dir_param
 	    && acpi_battery_dir) {
 		remove_proc_entry(ACPI_BATTERY_CLASS, acpi_root_dir);
 		acpi_battery_dir = 0;
 	}
-	up(&cm_sbs_sem);
+	mutex_unlock(&cm_sbs_mutex);
 	return;
 }
-
 EXPORT_SYMBOL(acpi_unlock_battery_dir);
 
 static int __init acpi_cm_sbs_init(void)
 {
-
-	if (acpi_disabled)
-		return 0;
-
-	init_MUTEX(&cm_sbs_sem);
-
 	return 0;
 }
-
 subsys_initcall(acpi_cm_sbs_init);
diff -urN linux-2.6.18-rc1/drivers/acpi/dispatcher/dsinit.c linux-2.6.18-rc2/drivers/acpi/dispatcher/dsinit.c
--- linux-2.6.18-rc1/drivers/acpi/dispatcher/dsinit.c	2006-07-15 22:34:41.936927968 +0000
+++ linux-2.6.18-rc2/drivers/acpi/dispatcher/dsinit.c	2006-07-15 22:34:47.181497257 +0000
@@ -116,16 +116,6 @@
 
 	case ACPI_TYPE_METHOD:
 
-		/*
-		 * Set the execution data width (32 or 64) based upon the
-		 * revision number of the parent ACPI table.
-		 * TBD: This is really for possible future support of integer width
-		 * on a per-table basis. Currently, we just use a global for the width.
-		 */
-		if (info->table_desc->pointer->revision == 1) {
-			node->flags |= ANOBJ_DATA_WIDTH_32;
-		}
-
 		info->method_count++;
 		break;
 
diff -urN linux-2.6.18-rc1/drivers/acpi/dispatcher/dsmethod.c linux-2.6.18-rc2/drivers/acpi/dispatcher/dsmethod.c
--- linux-2.6.18-rc1/drivers/acpi/dispatcher/dsmethod.c	2006-07-15 22:34:41.936927968 +0000
+++ linux-2.6.18-rc2/drivers/acpi/dispatcher/dsmethod.c	2006-07-15 22:34:47.181497257 +0000
@@ -134,7 +134,7 @@
 	union acpi_operand_object *mutex_desc;
 	acpi_status status;
 
-	ACPI_FUNCTION_NAME(ds_create_method_mutex);
+	ACPI_FUNCTION_TRACE(ds_create_method_mutex);
 
 	/* Create the new mutex object */
 
@@ -493,7 +493,7 @@
 
 	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
 			  "****Restart [%4.4s] Op %p ReturnValueFromCallee %p\n",
-			  (char *)&walk_state->method_node->name,
+			  acpi_ut_get_node_name(walk_state->method_node),
 			  walk_state->method_call_op, return_desc));
 
 	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
@@ -610,6 +610,7 @@
 
 			acpi_os_release_mutex(method_desc->method.mutex->mutex.
 					      os_mutex);
+			method_desc->method.mutex->mutex.owner_thread = NULL;
 		}
 	}
 
@@ -620,27 +621,11 @@
 		 */
 		method_node = walk_state->method_node;
 
-		/* Lock namespace for possible update */
-
-		status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
-		if (ACPI_FAILURE(status)) {
-			return_VOID;
-		}
-
-		/*
-		 * Delete any namespace entries created immediately underneath
-		 * the method
-		 */
-		if (method_node && method_node->child) {
-			acpi_ns_delete_namespace_subtree(method_node);
-		}
-
 		/*
-		 * Delete any namespace entries created anywhere else within
+		 * Delete any namespace objects created anywhere within
 		 * the namespace by the execution of this method
 		 */
 		acpi_ns_delete_namespace_by_owner(method_desc->method.owner_id);
-		status = acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
 	}
 
 	/* Decrement the thread count on the method */
diff -urN linux-2.6.18-rc1/drivers/acpi/dispatcher/dswexec.c linux-2.6.18-rc2/drivers/acpi/dispatcher/dswexec.c
--- linux-2.6.18-rc1/drivers/acpi/dispatcher/dswexec.c	2006-07-15 22:34:41.940928402 +0000
+++ linux-2.6.18-rc2/drivers/acpi/dispatcher/dswexec.c	2006-07-15 22:34:47.185497691 +0000
@@ -313,10 +313,10 @@
 	case AML_CLASS_EXECUTE:
 	case AML_CLASS_CREATE:
 		/*
-		 * Most operators with arguments.
+		 * Most operators with arguments (except create_xxx_field operators)
 		 * Start a new result/operand state
 		 */
-		if (walk_state->opcode != AML_CREATE_FIELD_OP) {
+		if (walk_state->op_info->object_type != ACPI_TYPE_BUFFER_FIELD) {
 			status = acpi_ds_result_stack_push(walk_state);
 		}
 		break;
diff -urN linux-2.6.18-rc1/drivers/acpi/dock.c linux-2.6.18-rc2/drivers/acpi/dock.c
--- linux-2.6.18-rc1/drivers/acpi/dock.c	2006-07-15 22:34:41.944928837 +0000
+++ linux-2.6.18-rc2/drivers/acpi/dock.c	2006-07-15 22:34:47.185497691 +0000
@@ -627,6 +627,7 @@
 	INIT_LIST_HEAD(&dock_station->hotplug_devices);
 	spin_lock_init(&dock_station->dd_lock);
 	spin_lock_init(&dock_station->hp_lock);
+	ATOMIC_INIT_NOTIFIER_HEAD(&dock_notifier_list);
 
 	/* Find dependent devices */
 	acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
diff -urN linux-2.6.18-rc1/drivers/acpi/ec.c linux-2.6.18-rc2/drivers/acpi/ec.c
--- linux-2.6.18-rc1/drivers/acpi/ec.c	2006-07-15 22:34:41.944928837 +0000
+++ linux-2.6.18-rc2/drivers/acpi/ec.c	2006-07-15 22:34:47.185497691 +0000
@@ -929,7 +929,7 @@
 	return single_open(file, acpi_ec_read_info, PDE(inode)->data);
 }
 
-static struct file_operations acpi_ec_info_ops = {
+static const struct file_operations acpi_ec_info_ops = {
 	.open = acpi_ec_info_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
diff -urN linux-2.6.18-rc1/drivers/acpi/event.c linux-2.6.18-rc2/drivers/acpi/event.c
--- linux-2.6.18-rc1/drivers/acpi/event.c	2006-07-15 22:34:41.944928837 +0000
+++ linux-2.6.18-rc2/drivers/acpi/event.c	2006-07-15 22:34:47.185497691 +0000
@@ -99,7 +99,7 @@
 	return 0;
 }
 
-static struct file_operations acpi_system_event_ops = {
+static const struct file_operations acpi_system_event_ops = {
 	.open = acpi_system_open_event,
 	.read = acpi_system_read_event,
 	.release = acpi_system_close_event,
diff -urN linux-2.6.18-rc1/drivers/acpi/events/evregion.c linux-2.6.18-rc2/drivers/acpi/events/evregion.c
--- linux-2.6.18-rc1/drivers/acpi/events/evregion.c	2006-07-15 22:34:41.948929271 +0000
+++ linux-2.6.18-rc2/drivers/acpi/events/evregion.c	2006-07-15 22:34:47.189498125 +0000
@@ -528,34 +528,40 @@
 				}
 			}
 
-			/* Call the setup handler with the deactivate notification */
+			/*
+			 * If the region has been activated, call the setup handler
+			 * with the deactivate notification
+			 */
+			if (region_obj->region.flags & AOPOBJ_SETUP_COMPLETE) {
+				region_setup = handler_obj->address_space.setup;
+				status =
+				    region_setup(region_obj,
+						 ACPI_REGION_DEACTIVATE,
+						 handler_obj->address_space.
+						 context, region_context);
+
+				/* Init routine may fail, Just ignore errors */
+
+				if (ACPI_FAILURE(status)) {
+					ACPI_EXCEPTION((AE_INFO, status,
+							"from region handler - deactivate, [%s]",
+							acpi_ut_get_region_name
+							(region_obj->region.
+							 space_id)));
+				}
 
-			region_setup = handler_obj->address_space.setup;
-			status =
-			    region_setup(region_obj, ACPI_REGION_DEACTIVATE,
-					 handler_obj->address_space.context,
-					 region_context);
-
-			/* Init routine may fail, Just ignore errors */
-
-			if (ACPI_FAILURE(status)) {
-				ACPI_EXCEPTION((AE_INFO, status,
-						"from region init, [%s]",
-						acpi_ut_get_region_name
-						(region_obj->region.space_id)));
+				region_obj->region.flags &=
+				    ~(AOPOBJ_SETUP_COMPLETE);
 			}
 
-			region_obj->region.flags &= ~(AOPOBJ_SETUP_COMPLETE);
-
 			/*
 			 * Remove handler reference in the region
 			 *
-			 * NOTE: this doesn't mean that the region goes away
-			 * The region is just inaccessible as indicated to
-			 * the _REG method
+			 * NOTE: this doesn't mean that the region goes away, the region
+			 * is just inaccessible as indicated to the _REG method
 			 *
-			 * If the region is on the handler's list
-			 * this better be the region's handler
+			 * If the region is on the handler's list, this must be the
+			 * region's handler
 			 */
 			region_obj->region.handler = NULL;
 			acpi_ut_remove_reference(handler_obj);
diff -urN linux-2.6.18-rc1/drivers/acpi/events/evxface.c linux-2.6.18-rc2/drivers/acpi/events/evxface.c
--- linux-2.6.18-rc1/drivers/acpi/events/evxface.c	2006-07-15 22:34:41.948929271 +0000
+++ linux-2.6.18-rc2/drivers/acpi/events/evxface.c	2006-07-15 22:34:47.189498125 +0000
@@ -428,7 +428,7 @@
 	node = acpi_ns_map_handle_to_node(device);
 	if (!node) {
 		status = AE_BAD_PARAMETER;
-		goto unlock;
+		goto unlock_and_exit;
 	}
 
 	/* Root Object */
@@ -442,7 +442,7 @@
 		    ((handler_type & ACPI_DEVICE_NOTIFY) &&
 		     !acpi_gbl_device_notify.handler)) {
 			status = AE_NOT_EXIST;
-			goto unlock;
+			goto unlock_and_exit;
 		}
 
 		/* Make sure all deferred tasks are completed */
@@ -474,7 +474,7 @@
 
 		if (!acpi_ev_is_notify_object(node)) {
 			status = AE_TYPE;
-			goto unlock;
+			goto unlock_and_exit;
 		}
 
 		/* Check for an existing internal object */
@@ -482,17 +482,21 @@
 		obj_desc = acpi_ns_get_attached_object(node);
 		if (!obj_desc) {
 			status = AE_NOT_EXIST;
-			goto unlock;
+			goto unlock_and_exit;
 		}
 
 		/* Object exists - make sure there's an existing handler */
 
 		if (handler_type & ACPI_SYSTEM_NOTIFY) {
 			notify_obj = obj_desc->common_notify.system_notify;
-			if ((!notify_obj) ||
-			    (notify_obj->notify.handler != handler)) {
+			if (!notify_obj) {
+				status = AE_NOT_EXIST;
+				goto unlock_and_exit;
+			}
+
+			if (notify_obj->notify.handler != handler) {
 				status = AE_BAD_PARAMETER;
-				goto unlock;
+				goto unlock_and_exit;
 			}
 			/* Make sure all deferred tasks are completed */
 
@@ -510,10 +514,14 @@
 
 		if (handler_type & ACPI_DEVICE_NOTIFY) {
 			notify_obj = obj_desc->common_notify.device_notify;
-			if ((!notify_obj) ||
-			    (notify_obj->notify.handler != handler)) {
+			if (!notify_obj) {
+				status = AE_NOT_EXIST;
+				goto unlock_and_exit;
+			}
+
+			if (notify_obj->notify.handler != handler) {
 				status = AE_BAD_PARAMETER;
-				goto unlock;
+				goto unlock_and_exit;
 			}
 			/* Make sure all deferred tasks are completed */
 
@@ -530,9 +538,9 @@
 		}
 	}
 
-unlock:
+      unlock_and_exit:
 	(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
-exit:
+      exit:
 	if (ACPI_FAILURE(status))
 		ACPI_EXCEPTION((AE_INFO, status, "Removing notify handler"));
 	return_ACPI_STATUS(status);
@@ -586,7 +594,7 @@
 	gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
 	if (!gpe_event_info) {
 		status = AE_BAD_PARAMETER;
-		goto unlock;
+		goto unlock_and_exit;
 	}
 
 	/* Make sure that there isn't a handler there already */
@@ -594,7 +602,7 @@
 	if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
 	    ACPI_GPE_DISPATCH_HANDLER) {
 		status = AE_ALREADY_EXISTS;
-		goto unlock;
+		goto unlock_and_exit;
 	}
 
 	/* Allocate and init handler object */
@@ -602,7 +610,7 @@
 	handler = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_handler_info));
 	if (!handler) {
 		status = AE_NO_MEMORY;
-		goto unlock;
+		goto unlock_and_exit;
 	}
 
 	handler->address = address;
@@ -613,7 +621,7 @@
 
 	status = acpi_ev_disable_gpe(gpe_event_info);
 	if (ACPI_FAILURE(status)) {
-		goto unlock;
+		goto unlock_and_exit;
 	}
 
 	/* Install the handler */
@@ -628,9 +636,9 @@
 
 	acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
 
-unlock:
+      unlock_and_exit:
 	(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
-exit:
+      exit:
 	if (ACPI_FAILURE(status))
 		ACPI_EXCEPTION((AE_INFO, status,
 				"Installing notify handler failed"));
diff -urN linux-2.6.18-rc1/drivers/acpi/events/evxfregn.c linux-2.6.18-rc2/drivers/acpi/events/evxfregn.c
--- linux-2.6.18-rc1/drivers/acpi/events/evxfregn.c	2006-07-15 22:34:41.948929271 +0000
+++ linux-2.6.18-rc2/drivers/acpi/events/evxfregn.c	2006-07-15 22:34:47.193498560 +0000
@@ -155,7 +155,11 @@
 	/* Convert and validate the device handle */
 
 	node = acpi_ns_map_handle_to_node(device);
-	if (!node) {
+	if (!node ||
+	    ((node->type != ACPI_TYPE_DEVICE) &&
+	     (node->type != ACPI_TYPE_PROCESSOR) &&
+	     (node->type != ACPI_TYPE_THERMAL) &&
+	     (node != acpi_gbl_root_node))) {
 		status = AE_BAD_PARAMETER;
 		goto unlock_and_exit;
 	}
@@ -178,6 +182,13 @@
 
 		if (handler_obj->address_space.space_id == space_id) {
 
+			/* Handler must be the same as the installed handler */
+
+			if (handler_obj->address_space.handler != handler) {
+				status = AE_BAD_PARAMETER;
+				goto unlock_and_exit;
+			}
+
 			/* Matched space_id, first dereference this in the Regions */
 
 			ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
diff -urN linux-2.6.18-rc1/drivers/acpi/executer/exconfig.c linux-2.6.18-rc2/drivers/acpi/executer/exconfig.c
--- linux-2.6.18-rc1/drivers/acpi/executer/exconfig.c	2006-07-15 22:34:41.948929271 +0000
+++ linux-2.6.18-rc2/drivers/acpi/executer/exconfig.c	2006-07-15 22:34:47.193498560 +0000
@@ -502,7 +502,6 @@
 	 * (Offset contains the table_id)
 	 */
 	acpi_ns_delete_namespace_by_owner(table_info->owner_id);
-	acpi_ut_release_owner_id(&table_info->owner_id);
 
 	/* Delete the table itself */
 
diff -urN linux-2.6.18-rc1/drivers/acpi/executer/exconvrt.c linux-2.6.18-rc2/drivers/acpi/executer/exconvrt.c
--- linux-2.6.18-rc1/drivers/acpi/executer/exconvrt.c	2006-07-15 22:34:41.952929705 +0000
+++ linux-2.6.18-rc2/drivers/acpi/executer/exconvrt.c	2006-07-15 22:34:47.193498560 +0000
@@ -170,6 +170,9 @@
 		return_ACPI_STATUS(AE_NO_MEMORY);
 	}
 
+	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Converted value: %8.8X%8.8X\n",
+			  ACPI_FORMAT_UINT64(result)));
+
 	/* Save the Result */
 
 	return_desc->integer.value = result;
diff -urN linux-2.6.18-rc1/drivers/acpi/executer/exmutex.c linux-2.6.18-rc2/drivers/acpi/executer/exmutex.c
--- linux-2.6.18-rc1/drivers/acpi/executer/exmutex.c	2006-07-15 22:34:41.952929705 +0000
+++ linux-2.6.18-rc2/drivers/acpi/executer/exmutex.c	2006-07-15 22:34:47.197498994 +0000
@@ -267,9 +267,9 @@
 	    && (obj_desc->mutex.os_mutex != ACPI_GLOBAL_LOCK)) {
 		ACPI_ERROR((AE_INFO,
 			    "Thread %X cannot release Mutex [%4.4s] acquired by thread %X",
-			    walk_state->thread->thread_id,
+			    (u32) walk_state->thread->thread_id,
 			    acpi_ut_get_node_name(obj_desc->mutex.node),
-			    obj_desc->mutex.owner_thread->thread_id));
+			    (u32) obj_desc->mutex.owner_thread->thread_id));
 		return_ACPI_STATUS(AE_AML_NOT_OWNER);
 	}
 
diff -urN linux-2.6.18-rc1/drivers/acpi/executer/exsystem.c linux-2.6.18-rc2/drivers/acpi/executer/exsystem.c
--- linux-2.6.18-rc1/drivers/acpi/executer/exsystem.c	2006-07-15 22:34:41.956930139 +0000
+++ linux-2.6.18-rc2/drivers/acpi/executer/exsystem.c	2006-07-15 22:34:47.201499428 +0000
@@ -60,7 +60,7 @@
  *
  * DESCRIPTION: Implements a semaphore wait with a check to see if the
  *              semaphore is available immediately.  If it is not, the
- *              interpreter is released.
+ *              interpreter is released before waiting.
  *
  ******************************************************************************/
 acpi_status acpi_ex_system_wait_semaphore(acpi_semaphore semaphore, u16 timeout)
@@ -110,9 +110,9 @@
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Implements a semaphore wait with a check to see if the
- *              semaphore is available immediately.  If it is not, the
- *              interpreter is released.
+ * DESCRIPTION: Implements a mutex wait with a check to see if the
+ *              mutex is available immediately.  If it is not, the
+ *              interpreter is released before waiting.
  *
  ******************************************************************************/
 
diff -urN linux-2.6.18-rc1/drivers/acpi/fan.c linux-2.6.18-rc2/drivers/acpi/fan.c
--- linux-2.6.18-rc1/drivers/acpi/fan.c	2006-07-15 22:34:41.960930574 +0000
+++ linux-2.6.18-rc2/drivers/acpi/fan.c	2006-07-15 22:34:47.201499428 +0000
@@ -120,7 +120,7 @@
 	return count;
 }
 
-static struct file_operations acpi_fan_state_ops = {
+static const struct file_operations acpi_fan_state_ops = {
 	.open = acpi_fan_state_open_fs,
 	.read = seq_read,
 	.write = acpi_fan_write_state,
diff -urN linux-2.6.18-rc1/drivers/acpi/hotkey.c linux-2.6.18-rc2/drivers/acpi/hotkey.c
--- linux-2.6.18-rc1/drivers/acpi/hotkey.c	2006-07-15 22:34:41.960930574 +0000
+++ linux-2.6.18-rc2/drivers/acpi/hotkey.c	2006-07-15 22:34:47.205499862 +0000
@@ -184,7 +184,7 @@
 					      *hotkey_list, int event);
 
 /* event based config */
-static struct file_operations hotkey_config_fops = {
+static const struct file_operations hotkey_config_fops = {
 	.open = hotkey_open_config,
 	.read = seq_read,
 	.write = hotkey_write_config,
@@ -193,7 +193,7 @@
 };
 
 /* polling based config */
-static struct file_operations hotkey_poll_config_fops = {
+static const struct file_operations hotkey_poll_config_fops = {
 	.open = hotkey_poll_open_config,
 	.read = seq_read,
 	.write = hotkey_write_config,
@@ -202,7 +202,7 @@
 };
 
 /* hotkey driver info */
-static struct file_operations hotkey_info_fops = {
+static const struct file_operations hotkey_info_fops = {
 	.open = hotkey_info_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
@@ -210,7 +210,7 @@
 };
 
 /* action */
-static struct file_operations hotkey_action_fops = {
+static const struct file_operations hotkey_action_fops = {
 	.open = hotkey_action_open_fs,
 	.read = seq_read,
 	.write = hotkey_execute_aml_method,
@@ -219,7 +219,7 @@
 };
 
 /* polling results */
-static struct file_operations hotkey_polling_fops = {
+static const struct file_operations hotkey_polling_fops = {
 	.open = hotkey_polling_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
diff -urN linux-2.6.18-rc1/drivers/acpi/namespace/nsalloc.c linux-2.6.18-rc2/drivers/acpi/namespace/nsalloc.c
--- linux-2.6.18-rc1/drivers/acpi/namespace/nsalloc.c	2006-07-15 22:34:41.964931008 +0000
+++ linux-2.6.18-rc2/drivers/acpi/namespace/nsalloc.c	2006-07-15 22:34:47.205499862 +0000
@@ -386,14 +386,17 @@
  *              specific ID.  Used to delete entire ACPI tables.  All
  *              reference counts are updated.
  *
+ * MUTEX:       Locks namespace during deletion walk.
+ *
  ******************************************************************************/
 
 void acpi_ns_delete_namespace_by_owner(acpi_owner_id owner_id)
 {
 	struct acpi_namespace_node *child_node;
 	struct acpi_namespace_node *deletion_node;
-	u32 level;
 	struct acpi_namespace_node *parent_node;
+	u32 level;
+	acpi_status status;
 
 	ACPI_FUNCTION_TRACE_U32(ns_delete_namespace_by_owner, owner_id);
 
@@ -401,6 +404,13 @@
 		return_VOID;
 	}
 
+	/* Lock namespace for possible update */
+
+	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
+	if (ACPI_FAILURE(status)) {
+		return_VOID;
+	}
+
 	deletion_node = NULL;
 	parent_node = acpi_gbl_root_node;
 	child_node = NULL;
@@ -469,5 +479,6 @@
 		}
 	}
 
+	(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
 	return_VOID;
 }
diff -urN linux-2.6.18-rc1/drivers/acpi/osl.c linux-2.6.18-rc2/drivers/acpi/osl.c
--- linux-2.6.18-rc1/drivers/acpi/osl.c	2006-07-15 22:34:41.972931876 +0000
+++ linux-2.6.18-rc2/drivers/acpi/osl.c	2006-07-15 22:34:47.213500731 +0000
@@ -36,7 +36,6 @@
 #include <linux/delay.h>
 #include <linux/workqueue.h>
 #include <linux/nmi.h>
-#include <linux/kthread.h>
 #include <acpi/acpi.h>
 #include <asm/io.h>
 #include <acpi/acpi_bus.h>
@@ -136,16 +135,6 @@
 #endif
 }
 
-
-extern int acpi_in_resume;
-void *acpi_os_allocate(acpi_size size)
-{
-	if (acpi_in_resume)
-		return kmalloc(size, GFP_ATOMIC);
-	else
-		return kmalloc(size, GFP_KERNEL);
-}
-
 acpi_status acpi_os_get_root_pointer(u32 flags, struct acpi_pointer *addr)
 {
 	if (efi_enabled) {
@@ -593,16 +582,6 @@
 	return;
 }
 
-static int acpi_os_execute_thread(void *context)
-{
-	struct acpi_os_dpc *dpc = (struct acpi_os_dpc *)context;
-	if (dpc) {
-		dpc->function(dpc->context);
-		kfree(dpc);
-	}
-	do_exit(0);
-}
-
 /*******************************************************************************
  *
  * FUNCTION:    acpi_os_execute
@@ -624,10 +603,16 @@
 	acpi_status status = AE_OK;
 	struct acpi_os_dpc *dpc;
 	struct work_struct *task;
-	struct task_struct *p;
+
+	ACPI_FUNCTION_TRACE("os_queue_for_execution");
+
+	ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+			  "Scheduling function [%p(%p)] for deferred execution.\n",
+			  function, context));
 
 	if (!function)
-		return AE_BAD_PARAMETER;
+		return_ACPI_STATUS(AE_BAD_PARAMETER);
+
 	/*
 	 * Allocate/initialize DPC structure.  Note that this memory will be
 	 * freed by the callee.  The kernel handles the tq_struct list  in a
@@ -638,34 +623,27 @@
 	 * We can save time and code by allocating the DPC and tq_structs
 	 * from the same memory.
 	 */
-	if (type == OSL_NOTIFY_HANDLER) {
-		dpc = kmalloc(sizeof(struct acpi_os_dpc), GFP_KERNEL);
-	} else {
-		dpc = kmalloc(sizeof(struct acpi_os_dpc) +
-				sizeof(struct work_struct), GFP_ATOMIC);
-	}
+
+	dpc =
+	    kmalloc(sizeof(struct acpi_os_dpc) + sizeof(struct work_struct),
+		    GFP_ATOMIC);
 	if (!dpc)
-		return AE_NO_MEMORY;
+		return_ACPI_STATUS(AE_NO_MEMORY);
+
 	dpc->function = function;
 	dpc->context = context;
 
-	if (type == OSL_NOTIFY_HANDLER) {
-		p = kthread_create(acpi_os_execute_thread, dpc, "kacpid_notify");
-		if (!IS_ERR(p)) {
-			wake_up_process(p);
-		} else {
-			status = AE_NO_MEMORY;
-			kfree(dpc);
-		}
-	} else {
-		task = (void *)(dpc + 1);
-		INIT_WORK(task, acpi_os_execute_deferred, (void *)dpc);
-		if (!queue_work(kacpid_wq, task)) {
-			status = AE_ERROR;
-			kfree(dpc);
-		}
+	task = (void *)(dpc + 1);
+	INIT_WORK(task, acpi_os_execute_deferred, (void *)dpc);
+
+	if (!queue_work(kacpid_wq, task)) {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+				  "Call to queue_work() failed.\n"));
+		kfree(dpc);
+		status = AE_ERROR;
 	}
-	return status;
+
+	return_ACPI_STATUS(status);
 }
 
 EXPORT_SYMBOL(acpi_os_execute);
@@ -1115,26 +1093,6 @@
 	return (AE_OK);
 }
 
-/*******************************************************************************
- *
- * FUNCTION:    acpi_os_acquire_object
- *
- * PARAMETERS:  Cache           - Handle to cache object
- *              ReturnObject    - Where the object is returned
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Return a zero-filled object.
- *
- ******************************************************************************/
-
-void *acpi_os_acquire_object(acpi_cache_t * cache)
-{
-	void *object = kmem_cache_zalloc(cache, GFP_KERNEL);
-	WARN_ON(!object);
-	return object;
-}
-
 /******************************************************************************
  *
  * FUNCTION:    acpi_os_validate_interface
diff -urN linux-2.6.18-rc1/drivers/acpi/parser/psutils.c linux-2.6.18-rc2/drivers/acpi/parser/psutils.c
--- linux-2.6.18-rc1/drivers/acpi/parser/psutils.c	2006-07-15 22:34:41.972931876 +0000
+++ linux-2.6.18-rc2/drivers/acpi/parser/psutils.c	2006-07-15 22:34:47.213500731 +0000
@@ -139,12 +139,10 @@
 		/* The generic op (default) is by far the most common (16 to 1) */
 
 		op = acpi_os_acquire_object(acpi_gbl_ps_node_cache);
-		memset(op, 0, sizeof(struct acpi_parse_obj_common));
 	} else {
 		/* Extended parseop */
 
 		op = acpi_os_acquire_object(acpi_gbl_ps_node_ext_cache);
-		memset(op, 0, sizeof(struct acpi_parse_obj_named));
 	}
 
 	/* Initialize the Op */
diff -urN linux-2.6.18-rc1/drivers/acpi/pci_link.c linux-2.6.18-rc2/drivers/acpi/pci_link.c
--- linux-2.6.18-rc1/drivers/acpi/pci_link.c	2006-07-15 22:34:41.976932311 +0000
+++ linux-2.6.18-rc2/drivers/acpi/pci_link.c	2006-07-15 22:34:47.217501165 +0000
@@ -780,11 +780,6 @@
 		return 0;
 }
 
-/*
- * FIXME: this is a workaround to avoid nasty warning.  It will be removed
- * after every device calls pci_disable_device in .resume.
- */
-int acpi_in_resume;
 static int irqrouter_resume(struct sys_device *dev)
 {
 	struct list_head *node = NULL;
@@ -794,7 +789,6 @@
 	/* Make sure SCI is enabled again (Apple firmware bug?) */
 	acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1, ACPI_MTX_DO_NOT_LOCK);
 
-	acpi_in_resume = 1;
 	list_for_each(node, &acpi_link.entries) {
 		link = list_entry(node, struct acpi_pci_link, node);
 		if (!link) {
@@ -803,7 +797,6 @@
 		}
 		acpi_pci_link_resume(link);
 	}
-	acpi_in_resume = 0;
 	return 0;
 }
 
diff -urN linux-2.6.18-rc1/drivers/acpi/power.c linux-2.6.18-rc2/drivers/acpi/power.c
--- linux-2.6.18-rc1/drivers/acpi/power.c	2006-07-15 22:34:41.976932311 +0000
+++ linux-2.6.18-rc2/drivers/acpi/power.c	2006-07-15 22:34:47.217501165 +0000
@@ -80,7 +80,7 @@
 
 static struct list_head acpi_power_resource_list;
 
-static struct file_operations acpi_power_fops = {
+static const struct file_operations acpi_power_fops = {
 	.open = acpi_power_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
diff -urN linux-2.6.18-rc1/drivers/acpi/processor_core.c linux-2.6.18-rc2/drivers/acpi/processor_core.c
--- linux-2.6.18-rc1/drivers/acpi/processor_core.c	2006-07-15 22:34:41.976932311 +0000
+++ linux-2.6.18-rc2/drivers/acpi/processor_core.c	2006-07-15 22:34:47.221501599 +0000
@@ -102,7 +102,7 @@
 #define INSTALL_NOTIFY_HANDLER		1
 #define UNINSTALL_NOTIFY_HANDLER	2
 
-static struct file_operations acpi_processor_info_fops = {
+static const struct file_operations acpi_processor_info_fops = {
 	.open = acpi_processor_info_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
diff -urN linux-2.6.18-rc1/drivers/acpi/processor_idle.c linux-2.6.18-rc2/drivers/acpi/processor_idle.c
--- linux-2.6.18-rc1/drivers/acpi/processor_idle.c	2006-07-15 22:34:41.976932311 +0000
+++ linux-2.6.18-rc2/drivers/acpi/processor_idle.c	2006-07-15 22:34:47.221501599 +0000
@@ -1070,7 +1070,7 @@
 			   PDE(inode)->data);
 }
 
-static struct file_operations acpi_processor_power_fops = {
+static const struct file_operations acpi_processor_power_fops = {
 	.open = acpi_processor_power_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
diff -urN linux-2.6.18-rc1/drivers/acpi/sleep/proc.c linux-2.6.18-rc2/drivers/acpi/sleep/proc.c
--- linux-2.6.18-rc1/drivers/acpi/sleep/proc.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/acpi/sleep/proc.c	2006-07-15 22:34:47.229502468 +0000
@@ -434,7 +434,7 @@
 			   PDE(inode)->data);
 }
 
-static struct file_operations acpi_system_wakeup_device_fops = {
+static const struct file_operations acpi_system_wakeup_device_fops = {
 	.open = acpi_system_wakeup_device_open_fs,
 	.read = seq_read,
 	.write = acpi_system_write_wakeup_device,
@@ -443,7 +443,7 @@
 };
 
 #ifdef	CONFIG_ACPI_SLEEP_PROC_SLEEP
-static struct file_operations acpi_system_sleep_fops = {
+static const struct file_operations acpi_system_sleep_fops = {
 	.open = acpi_system_sleep_open_fs,
 	.read = seq_read,
 	.write = acpi_system_write_sleep,
@@ -452,7 +452,7 @@
 };
 #endif				/* CONFIG_ACPI_SLEEP_PROC_SLEEP */
 
-static struct file_operations acpi_system_alarm_fops = {
+static const struct file_operations acpi_system_alarm_fops = {
 	.open = acpi_system_alarm_open_fs,
 	.read = seq_read,
 	.write = acpi_system_write_alarm,
diff -urN linux-2.6.18-rc1/drivers/acpi/system.c linux-2.6.18-rc2/drivers/acpi/system.c
--- linux-2.6.18-rc1/drivers/acpi/system.c	2006-07-15 22:34:41.984933179 +0000
+++ linux-2.6.18-rc2/drivers/acpi/system.c	2006-07-15 22:34:47.229502468 +0000
@@ -57,7 +57,7 @@
 	return single_open(file, acpi_system_read_info, PDE(inode)->data);
 }
 
-static struct file_operations acpi_system_info_ops = {
+static const struct file_operations acpi_system_info_ops = {
 	.open = acpi_system_info_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
@@ -67,7 +67,7 @@
 static ssize_t acpi_system_read_dsdt(struct file *, char __user *, size_t,
 				     loff_t *);
 
-static struct file_operations acpi_system_dsdt_ops = {
+static const struct file_operations acpi_system_dsdt_ops = {
 	.read = acpi_system_read_dsdt,
 };
 
@@ -94,7 +94,7 @@
 static ssize_t acpi_system_read_fadt(struct file *, char __user *, size_t,
 				     loff_t *);
 
-static struct file_operations acpi_system_fadt_ops = {
+static const struct file_operations acpi_system_fadt_ops = {
 	.read = acpi_system_read_fadt,
 };
 
diff -urN linux-2.6.18-rc1/drivers/acpi/tables/tbget.c linux-2.6.18-rc2/drivers/acpi/tables/tbget.c
--- linux-2.6.18-rc1/drivers/acpi/tables/tbget.c	2006-07-15 22:34:41.988933613 +0000
+++ linux-2.6.18-rc2/drivers/acpi/tables/tbget.c	2006-07-15 22:34:47.229502468 +0000
@@ -320,6 +320,16 @@
 
 	ACPI_FUNCTION_TRACE(tb_get_this_table);
 
+	/* Validate minimum length */
+
+	if (header->length < sizeof(struct acpi_table_header)) {
+		ACPI_ERROR((AE_INFO,
+			    "Table length (%X) is smaller than minimum (%X)",
+			    header->length, sizeof(struct acpi_table_header)));
+
+		return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH);
+	}
+
 	/*
 	 * Flags contains the current processor mode (Virtual or Physical
 	 * addressing) The pointer_type is either Logical or Physical
@@ -356,7 +366,7 @@
 		 */
 		status = acpi_os_map_memory(address->pointer.physical,
 					    (acpi_size) header->length,
-					    (void *)&full_table);
+					    ACPI_CAST_PTR(void, &full_table));
 		if (ACPI_FAILURE(status)) {
 			ACPI_ERROR((AE_INFO,
 				    "Could not map memory for table [%4.4s] at %8.8X%8.8X for length %X",
diff -urN linux-2.6.18-rc1/drivers/acpi/tables/tbinstal.c linux-2.6.18-rc2/drivers/acpi/tables/tbinstal.c
--- linux-2.6.18-rc1/drivers/acpi/tables/tbinstal.c	2006-07-15 22:34:41.988933613 +0000
+++ linux-2.6.18-rc2/drivers/acpi/tables/tbinstal.c	2006-07-15 22:34:47.229502468 +0000
@@ -256,7 +256,7 @@
 
 	status = acpi_ut_allocate_owner_id(&table_desc->owner_id);
 	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
+		goto error_exit1;
 	}
 
 	/* Install the table into the global data structure */
@@ -274,8 +274,8 @@
 		 * at this location, so return an error.
 		 */
 		if (list_head->next) {
-			ACPI_FREE(table_desc);
-			return_ACPI_STATUS(AE_ALREADY_EXISTS);
+			status = AE_ALREADY_EXISTS;
+			goto error_exit2;
 		}
 
 		table_desc->next = list_head->next;
@@ -335,6 +335,17 @@
 	table_info->owner_id = table_desc->owner_id;
 	table_info->installed_desc = table_desc;
 	return_ACPI_STATUS(AE_OK);
+
+	/* Error exit with cleanup */
+
+      error_exit2:
+
+	acpi_ut_release_owner_id(&table_desc->owner_id);
+
+      error_exit1:
+
+	ACPI_FREE(table_desc);
+	return_ACPI_STATUS(status);
 }
 
 /*******************************************************************************
@@ -525,6 +536,10 @@
 
 	acpi_tb_delete_single_table(table_desc);
 
+	/* Free the owner ID associated with this table */
+
+	acpi_ut_release_owner_id(&table_desc->owner_id);
+
 	/* Free the table descriptor */
 
 	next_desc = table_desc->next;
diff -urN linux-2.6.18-rc1/drivers/acpi/tables/tbrsdt.c linux-2.6.18-rc2/drivers/acpi/tables/tbrsdt.c
--- linux-2.6.18-rc1/drivers/acpi/tables/tbrsdt.c	2006-07-15 22:34:41.988933613 +0000
+++ linux-2.6.18-rc2/drivers/acpi/tables/tbrsdt.c	2006-07-15 22:34:47.229502468 +0000
@@ -183,6 +183,17 @@
 
 	ACPI_FUNCTION_ENTRY();
 
+	/* Validate minimum length */
+
+	if (table_ptr->length < sizeof(struct acpi_table_header)) {
+		ACPI_ERROR((AE_INFO,
+			    "RSDT/XSDT length (%X) is smaller than minimum (%X)",
+			    table_ptr->length,
+			    sizeof(struct acpi_table_header)));
+
+		return (AE_INVALID_TABLE_LENGTH);
+	}
+
 	/* Search for appropriate signature, RSDT or XSDT */
 
 	if (acpi_gbl_root_table_type == ACPI_TABLE_TYPE_RSDT) {
@@ -210,7 +221,7 @@
 			ACPI_ERROR((AE_INFO, "Looking for XSDT"));
 		}
 
-		ACPI_DUMP_BUFFER((char *)table_ptr, 48);
+		ACPI_DUMP_BUFFER(ACPI_CAST_PTR(char, table_ptr), 48);
 		return (AE_BAD_SIGNATURE);
 	}
 
@@ -258,7 +269,7 @@
 
 	status = acpi_tb_validate_rsdt(table_info.pointer);
 	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
+		goto error_cleanup;
 	}
 
 	/* Get the number of tables defined in the RSDT or XSDT */
@@ -270,14 +281,14 @@
 
 	status = acpi_tb_convert_to_xsdt(&table_info);
 	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
+		goto error_cleanup;
 	}
 
 	/* Save the table pointers and allocation info */
 
 	status = acpi_tb_init_table_descriptor(ACPI_TABLE_ID_XSDT, &table_info);
 	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
+		goto error_cleanup;
 	}
 
 	acpi_gbl_XSDT =
@@ -285,4 +296,12 @@
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "XSDT located at %p\n", acpi_gbl_XSDT));
 	return_ACPI_STATUS(status);
+
+      error_cleanup:
+
+	/* Free table allocated by acpi_tb_get_table */
+
+	acpi_tb_delete_single_table(&table_info);
+
+	return_ACPI_STATUS(status);
 }
diff -urN linux-2.6.18-rc1/drivers/acpi/tables/tbxface.c linux-2.6.18-rc2/drivers/acpi/tables/tbxface.c
--- linux-2.6.18-rc1/drivers/acpi/tables/tbxface.c	2006-07-15 22:34:41.988933613 +0000
+++ linux-2.6.18-rc2/drivers/acpi/tables/tbxface.c	2006-07-15 22:34:47.233502902 +0000
@@ -134,8 +134,8 @@
  * RETURN:      Status
  *
  * DESCRIPTION: This function is called to load a table from the caller's
- *              buffer.  The buffer must contain an entire ACPI Table including
- *              a valid header.  The header fields will be verified, and if it
+ *              buffer. The buffer must contain an entire ACPI Table including
+ *              a valid header. The header fields will be verified, and if it
  *              is determined that the table is invalid, the call will fail.
  *
  ******************************************************************************/
@@ -245,15 +245,18 @@
 	/* Find all tables of the requested type */
 
 	table_desc = acpi_gbl_table_lists[table_type].next;
+	if (!table_desc) {
+		return_ACPI_STATUS(AE_NOT_EXIST);
+	}
+
 	while (table_desc) {
 		/*
-		 * Delete all namespace entries owned by this table.  Note that these
-		 * entries can appear anywhere in the namespace by virtue of the AML
-		 * "Scope" operator.  Thus, we need to track ownership by an ID, not
+		 * Delete all namespace objects owned by this table. Note that these
+		 * objects can appear anywhere in the namespace by virtue of the AML
+		 * "Scope" operator. Thus, we need to track ownership by an ID, not
 		 * simply a position within the hierarchy
 		 */
 		acpi_ns_delete_namespace_by_owner(table_desc->owner_id);
-		acpi_ut_release_owner_id(&table_desc->owner_id);
 		table_desc = table_desc->next;
 	}
 
@@ -275,12 +278,12 @@
  *                                see acpi_gbl_acpi_table_flag
  *              out_table_header - pointer to the struct acpi_table_header if successful
  *
- * DESCRIPTION: This function is called to get an ACPI table header.  The caller
+ * DESCRIPTION: This function is called to get an ACPI table header. The caller
  *              supplies an pointer to a data area sufficient to contain an ACPI
  *              struct acpi_table_header structure.
  *
  *              The header contains a length field that can be used to determine
- *              the size of the buffer needed to contain the entire table.  This
+ *              the size of the buffer needed to contain the entire table. This
  *              function is not valid for the RSD PTR table since it does not
  *              have a standard header and is fixed length.
  *
@@ -322,7 +325,8 @@
 
 	/* Copy the header to the caller's buffer */
 
-	ACPI_MEMCPY((void *)out_table_header, (void *)tbl_ptr,
+	ACPI_MEMCPY(ACPI_CAST_PTR(void, out_table_header),
+		    ACPI_CAST_PTR(void, tbl_ptr),
 		    sizeof(struct acpi_table_header));
 
 	return_ACPI_STATUS(status);
@@ -344,10 +348,10 @@
  *
  * RETURN:      Status
  *
- * DESCRIPTION: This function is called to get an ACPI table.  The caller
+ * DESCRIPTION: This function is called to get an ACPI table. The caller
  *              supplies an out_buffer large enough to contain the entire ACPI
- *              table.  The caller should call the acpi_get_table_header function
- *              first to determine the buffer size needed.  Upon completion
+ *              table. The caller should call the acpi_get_table_header function
+ *              first to determine the buffer size needed. Upon completion
  *              the out_buffer->Length field will indicate the number of bytes
  *              copied into the out_buffer->buf_ptr buffer. This table will be
  *              a complete table including the header.
@@ -417,7 +421,9 @@
 
 	/* Copy the table to the buffer */
 
-	ACPI_MEMCPY((void *)ret_buffer->pointer, (void *)tbl_ptr, table_length);
+	ACPI_MEMCPY(ACPI_CAST_PTR(void, ret_buffer->pointer),
+		    ACPI_CAST_PTR(void, tbl_ptr), table_length);
+
 	return_ACPI_STATUS(AE_OK);
 }
 
diff -urN linux-2.6.18-rc1/drivers/acpi/thermal.c linux-2.6.18-rc2/drivers/acpi/thermal.c
--- linux-2.6.18-rc1/drivers/acpi/thermal.c	2006-07-15 22:34:41.992934047 +0000
+++ linux-2.6.18-rc2/drivers/acpi/thermal.c	2006-07-15 22:34:47.233502902 +0000
@@ -176,21 +176,21 @@
 	struct timer_list timer;
 };
 
-static struct file_operations acpi_thermal_state_fops = {
+static const struct file_operations acpi_thermal_state_fops = {
 	.open = acpi_thermal_state_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
 	.release = single_release,
 };
 
-static struct file_operations acpi_thermal_temp_fops = {
+static const struct file_operations acpi_thermal_temp_fops = {
 	.open = acpi_thermal_temp_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
 	.release = single_release,
 };
 
-static struct file_operations acpi_thermal_trip_fops = {
+static const struct file_operations acpi_thermal_trip_fops = {
 	.open = acpi_thermal_trip_open_fs,
 	.read = seq_read,
 	.write = acpi_thermal_write_trip_points,
@@ -198,7 +198,7 @@
 	.release = single_release,
 };
 
-static struct file_operations acpi_thermal_cooling_fops = {
+static const struct file_operations acpi_thermal_cooling_fops = {
 	.open = acpi_thermal_cooling_open_fs,
 	.read = seq_read,
 	.write = acpi_thermal_write_cooling_mode,
@@ -206,7 +206,7 @@
 	.release = single_release,
 };
 
-static struct file_operations acpi_thermal_polling_fops = {
+static const struct file_operations acpi_thermal_polling_fops = {
 	.open = acpi_thermal_polling_open_fs,
 	.read = seq_read,
 	.write = acpi_thermal_write_polling,
@@ -1359,13 +1359,28 @@
 static int acpi_thermal_resume(struct acpi_device *device, int state)
 {
 	struct acpi_thermal *tz = NULL;
+	int i;
 
 	if (!device || !acpi_driver_data(device))
 		return -EINVAL;
 
 	tz = (struct acpi_thermal *)acpi_driver_data(device);
 
-	acpi_thermal_check(tz);
+	acpi_thermal_get_temperature(tz);
+
+	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
+		if (tz->trips.active[i].flags.valid) {
+ 			tz->temperature = tz->trips.active[i].temperature;
+			tz->trips.active[i].flags.enabled = 0;
+
+			acpi_thermal_active(tz);
+
+			tz->state.active |= tz->trips.active[i].flags.enabled;
+			tz->state.active_index = i;
+		}
+	}
+
+ 	acpi_thermal_check(tz);
 
 	return AE_OK;
 }
diff -urN linux-2.6.18-rc1/drivers/acpi/utilities/utalloc.c linux-2.6.18-rc2/drivers/acpi/utilities/utalloc.c
--- linux-2.6.18-rc1/drivers/acpi/utilities/utalloc.c	2006-07-15 22:34:41.992934047 +0000
+++ linux-2.6.18-rc2/drivers/acpi/utilities/utalloc.c	2006-07-15 22:34:47.233502902 +0000
@@ -285,6 +285,7 @@
 	return (status);
 }
 
+#ifdef NOT_USED_BY_LINUX
 /*******************************************************************************
  *
  * FUNCTION:    acpi_ut_allocate
@@ -360,3 +361,4 @@
 
 	return (allocation);
 }
+#endif
diff -urN linux-2.6.18-rc1/drivers/acpi/utilities/utdebug.c linux-2.6.18-rc2/drivers/acpi/utilities/utdebug.c
--- linux-2.6.18-rc1/drivers/acpi/utilities/utdebug.c	2006-07-15 22:34:41.992934047 +0000
+++ linux-2.6.18-rc2/drivers/acpi/utilities/utdebug.c	2006-07-15 22:34:47.237503336 +0000
@@ -47,7 +47,7 @@
 ACPI_MODULE_NAME("utdebug")
 
 #ifdef ACPI_DEBUG_OUTPUT
-static u32 acpi_gbl_prev_thread_id = 0xFFFFFFFF;
+static acpi_thread_id acpi_gbl_prev_thread_id;
 static char *acpi_gbl_fn_entry_str = "----Entry";
 static char *acpi_gbl_fn_exit_str = "----Exit-";
 
@@ -181,7 +181,7 @@
 		if (ACPI_LV_THREADS & acpi_dbg_level) {
 			acpi_os_printf
 			    ("\n**** Context Switch from TID %X to TID %X ****\n\n",
-			     acpi_gbl_prev_thread_id, thread_id);
+			     (u32) acpi_gbl_prev_thread_id, (u32) thread_id);
 		}
 
 		acpi_gbl_prev_thread_id = thread_id;
diff -urN linux-2.6.18-rc1/drivers/acpi/utilities/utdelete.c linux-2.6.18-rc2/drivers/acpi/utilities/utdelete.c
--- linux-2.6.18-rc1/drivers/acpi/utilities/utdelete.c	2006-07-15 22:34:41.992934047 +0000
+++ linux-2.6.18-rc2/drivers/acpi/utilities/utdelete.c	2006-07-15 22:34:47.237503336 +0000
@@ -447,11 +447,16 @@
 		 */
 		switch (ACPI_GET_OBJECT_TYPE(object)) {
 		case ACPI_TYPE_DEVICE:
-
-			acpi_ut_update_ref_count(object->device.system_notify,
-						 action);
-			acpi_ut_update_ref_count(object->device.device_notify,
-						 action);
+		case ACPI_TYPE_PROCESSOR:
+		case ACPI_TYPE_POWER:
+		case ACPI_TYPE_THERMAL:
+
+			/* Update the notify objects for these types (if present) */
+
+			acpi_ut_update_ref_count(object->common_notify.
+						 system_notify, action);
+			acpi_ut_update_ref_count(object->common_notify.
+						 device_notify, action);
 			break;
 
 		case ACPI_TYPE_PACKAGE:
diff -urN linux-2.6.18-rc1/drivers/acpi/utilities/utmisc.c linux-2.6.18-rc2/drivers/acpi/utilities/utmisc.c
--- linux-2.6.18-rc1/drivers/acpi/utilities/utmisc.c	2006-07-15 22:34:41.996934482 +0000
+++ linux-2.6.18-rc2/drivers/acpi/utilities/utmisc.c	2006-07-15 22:34:47.237503336 +0000
@@ -65,7 +65,7 @@
 u8 acpi_ut_is_aml_table(struct acpi_table_header *table)
 {
 
-	/* Ignore tables that contain AML */
+	/* These are the only tables that contain executable AML */
 
 	if (ACPI_COMPARE_NAME(table->signature, DSDT_SIG) ||
 	    ACPI_COMPARE_NAME(table->signature, PSDT_SIG) ||
@@ -419,10 +419,15 @@
 {
 
 	if (revision <= 1) {
+
+		/* 32-bit case */
+
 		acpi_gbl_integer_bit_width = 32;
 		acpi_gbl_integer_nybble_width = 8;
 		acpi_gbl_integer_byte_width = 4;
 	} else {
+		/* 64-bit case (ACPI 2.0+) */
+
 		acpi_gbl_integer_bit_width = 64;
 		acpi_gbl_integer_nybble_width = 16;
 		acpi_gbl_integer_byte_width = 8;
@@ -502,6 +507,7 @@
  * FUNCTION:    acpi_ut_valid_acpi_char
  *
  * PARAMETERS:  Char            - The character to be examined
+ *              Position        - Byte position (0-3)
  *
  * RETURN:      TRUE if the character is valid, FALSE otherwise
  *
@@ -609,7 +615,9 @@
  *
  * RETURN:      Status and Converted value
  *
- * DESCRIPTION: Convert a string into an unsigned value.
+ * DESCRIPTION: Convert a string into an unsigned value. Performs either a
+ *              32-bit or 64-bit conversion, depending on the current mode
+ *              of the interpreter.
  *              NOTE: Does not support Octal strings, not needed.
  *
  ******************************************************************************/
@@ -627,7 +635,7 @@
 	u8 sign_of0x = 0;
 	u8 term = 0;
 
-	ACPI_FUNCTION_TRACE(ut_stroul64);
+	ACPI_FUNCTION_TRACE_STR(ut_stroul64, string);
 
 	switch (base) {
 	case ACPI_ANY_BASE:
@@ -675,11 +683,13 @@
 		}
 	}
 
+	/*
+	 * Perform a 32-bit or 64-bit conversion, depending upon the current
+	 * execution mode of the interpreter
+	 */
 	dividend = (mode32) ? ACPI_UINT32_MAX : ACPI_UINT64_MAX;
 
-	/* At least one character in the string here */
-
-	/* Main loop: convert the string to a 64-bit integer */
+	/* Main loop: convert the string to a 32- or 64-bit integer */
 
 	while (*string) {
 		if (ACPI_IS_DIGIT(*string)) {
@@ -754,6 +764,9 @@
 
       all_done:
 
+	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Converted value: %8.8X%8.8X\n",
+			  ACPI_FORMAT_UINT64(return_value)));
+
 	*ret_integer = return_value;
 	return_ACPI_STATUS(AE_OK);
 
diff -urN linux-2.6.18-rc1/drivers/acpi/utilities/utmutex.c linux-2.6.18-rc2/drivers/acpi/utilities/utmutex.c
--- linux-2.6.18-rc1/drivers/acpi/utilities/utmutex.c	2006-07-15 22:34:41.996934482 +0000
+++ linux-2.6.18-rc2/drivers/acpi/utilities/utmutex.c	2006-07-15 22:34:47.241503770 +0000
@@ -244,14 +244,14 @@
 
 	ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
 			  "Thread %X attempting to acquire Mutex [%s]\n",
-			  this_thread_id, acpi_ut_get_mutex_name(mutex_id)));
+			  (u32) this_thread_id, acpi_ut_get_mutex_name(mutex_id)));
 
 	status = acpi_os_acquire_mutex(acpi_gbl_mutex_info[mutex_id].mutex,
 				       ACPI_WAIT_FOREVER);
 	if (ACPI_SUCCESS(status)) {
 		ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
 				  "Thread %X acquired Mutex [%s]\n",
-				  this_thread_id,
+				  (u32) this_thread_id,
 				  acpi_ut_get_mutex_name(mutex_id)));
 
 		acpi_gbl_mutex_info[mutex_id].use_count++;
@@ -259,7 +259,7 @@
 	} else {
 		ACPI_EXCEPTION((AE_INFO, status,
 				"Thread %X could not acquire Mutex [%X]",
-				this_thread_id, mutex_id));
+				(u32) this_thread_id, mutex_id));
 	}
 
 	return (status);
@@ -285,7 +285,7 @@
 
 	this_thread_id = acpi_os_get_thread_id();
 	ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
-			  "Thread %X releasing Mutex [%s]\n", this_thread_id,
+			  "Thread %X releasing Mutex [%s]\n", (u32) this_thread_id,
 			  acpi_ut_get_mutex_name(mutex_id)));
 
 	if (mutex_id > ACPI_MAX_MUTEX) {
diff -urN linux-2.6.18-rc1/drivers/acpi/utilities/utstate.c linux-2.6.18-rc2/drivers/acpi/utilities/utstate.c
--- linux-2.6.18-rc1/drivers/acpi/utilities/utstate.c	2006-07-15 22:34:41.996934482 +0000
+++ linux-2.6.18-rc2/drivers/acpi/utilities/utstate.c	2006-07-15 22:34:47.241503770 +0000
@@ -199,6 +199,13 @@
 	state->common.descriptor_type = ACPI_DESC_TYPE_STATE_THREAD;
 	state->thread.thread_id = acpi_os_get_thread_id();
 
+	/* Check for invalid thread ID - zero is very bad, it will break things */
+
+	if (!state->thread.thread_id) {
+		ACPI_ERROR((AE_INFO, "Invalid zero ID from AcpiOsGetThreadId"));
+		state->thread.thread_id = (acpi_thread_id) 1;
+	}
+
 	return_PTR((struct acpi_thread_state *)state);
 }
 
diff -urN linux-2.6.18-rc1/drivers/atm/Kconfig linux-2.6.18-rc2/drivers/atm/Kconfig
--- linux-2.6.18-rc1/drivers/atm/Kconfig	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/atm/Kconfig	2006-07-15 22:34:47.245504205 +0000
@@ -398,7 +398,7 @@
 	default n
 	help
 	  This defers work to be done by the interrupt handler to a
-	  tasklet instead of hanlding everything at interrupt time.  This
+	  tasklet instead of handling everything at interrupt time.  This
 	  may improve the responsive of the host.
 
 config ATM_FORE200E_TX_RETRY
diff -urN linux-2.6.18-rc1/drivers/base/Kconfig linux-2.6.18-rc2/drivers/base/Kconfig
--- linux-2.6.18-rc1/drivers/base/Kconfig	2006-07-15 22:34:42.012936219 +0000
+++ linux-2.6.18-rc2/drivers/base/Kconfig	2006-07-15 22:34:47.257505507 +0000
@@ -20,7 +20,7 @@
 
 config FW_LOADER
 	tristate "Userspace firmware loading support"
-	select HOTPLUG
+	depends on HOTPLUG
 	---help---
 	  This option is provided for the case where no in-kernel-tree modules
 	  require userspace firmware loading support, but a module built outside
diff -urN linux-2.6.18-rc1/drivers/base/bus.c linux-2.6.18-rc2/drivers/base/bus.c
--- linux-2.6.18-rc1/drivers/base/bus.c	2006-07-15 22:34:42.012936219 +0000
+++ linux-2.6.18-rc2/drivers/base/bus.c	2006-07-15 22:34:47.257505507 +0000
@@ -129,7 +129,7 @@
 
 };
 
-decl_subsys(bus, &ktype_bus, NULL);
+static decl_subsys(bus, &ktype_bus, NULL);
 
 
 #ifdef CONFIG_HOTPLUG
@@ -598,12 +598,13 @@
  *
  *	Note that kset_find_obj increments bus' reference count.
  */
-
+#if 0
 struct bus_type * find_bus(char * name)
 {
 	struct kobject * k = kset_find_obj(&bus_subsys.kset, name);
 	return k ? to_bus(k) : NULL;
 }
+#endif  /*  0  */
 
 
 /**
diff -urN linux-2.6.18-rc1/drivers/base/core.c linux-2.6.18-rc2/drivers/base/core.c
--- linux-2.6.18-rc1/drivers/base/core.c	2006-07-15 22:34:42.016936653 +0000
+++ linux-2.6.18-rc2/drivers/base/core.c	2006-07-15 22:34:47.257505507 +0000
@@ -559,20 +559,20 @@
 
 /**
  * device_create - creates a device and registers it with sysfs
- * @cs: pointer to the struct class that this device should be registered to.
- * @parent: pointer to the parent struct device of this new device, if any.
- * @dev: the dev_t for the char device to be added.
- * @fmt: string for the class device's name
+ * @class: pointer to the struct class that this device should be registered to
+ * @parent: pointer to the parent struct device of this new device, if any
+ * @devt: the dev_t for the char device to be added
+ * @fmt: string for the device's name
+ *
+ * This function can be used by char device classes.  A struct device
+ * will be created in sysfs, registered to the specified class.
  *
- * This function can be used by char device classes.  A struct
- * device will be created in sysfs, registered to the specified
- * class.
  * A "dev" file will be created, showing the dev_t for the device, if
  * the dev_t is not 0,0.
- * If a pointer to a parent struct device is passed in, the newly
- * created struct device will be a child of that device in sysfs.  The
- * pointer to the struct device will be returned from the call.  Any
- * further sysfs files that might be required can be created using this
+ * If a pointer to a parent struct device is passed in, the newly created
+ * struct device will be a child of that device in sysfs.
+ * The pointer to the struct device will be returned from the call.
+ * Any further sysfs files that might be required can be created using this
  * pointer.
  *
  * Note: the struct class passed to this function must have previously
@@ -620,11 +620,11 @@
 
 /**
  * device_destroy - removes a device that was created with device_create()
- * @class: the pointer to the struct class that this device was registered * with.
- * @dev: the dev_t of the device that was previously registered.
+ * @class: pointer to the struct class that this device was registered with
+ * @devt: the dev_t of the device that was previously registered
  *
- * This call unregisters and cleans up a class device that was created with a
- * call to class_device_create()
+ * This call unregisters and cleans up a device that was created with a
+ * call to device_create().
  */
 void device_destroy(struct class *class, dev_t devt)
 {
diff -urN linux-2.6.18-rc1/drivers/block/Kconfig linux-2.6.18-rc2/drivers/block/Kconfig
--- linux-2.6.18-rc1/drivers/block/Kconfig	2006-07-15 22:34:42.020937087 +0000
+++ linux-2.6.18-rc2/drivers/block/Kconfig	2006-07-15 22:34:47.265506376 +0000
@@ -400,6 +400,16 @@
 	  what are you doing. If you are using IBM S/390, then set this to
 	  8192.
 
+config BLK_DEV_RAM_BLOCKSIZE
+	int "Default RAM disk block size (bytes)"
+	depends on BLK_DEV_RAM
+	default "1024"
+	help
+	  The default value is 1024 kilobytes.  PAGE_SIZE is a much more
+	  efficient choice however.  The default is kept to ensure initrd
+	  setups function - apparently needed by the rd_load_image routine
+	  that supposes the filesystem in the image uses a 1024 blocksize.
+
 config BLK_DEV_INITRD
 	bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
 	depends on BROKEN || !FRV
diff -urN linux-2.6.18-rc1/drivers/block/aoe/aoechr.c linux-2.6.18-rc2/drivers/block/aoe/aoechr.c
--- linux-2.6.18-rc1/drivers/block/aoe/aoechr.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/block/aoe/aoechr.c	2006-07-15 22:34:47.265506376 +0000
@@ -162,7 +162,7 @@
 {
 	int n, i;
 
-	n = MINOR(inode->i_rdev);
+	n = iminor(inode);
 	filp->private_data = (void *) (unsigned long) n;
 
 	for (i = 0; i < ARRAY_SIZE(chardevs); ++i)
diff -urN linux-2.6.18-rc1/drivers/block/cpqarray.c linux-2.6.18-rc2/drivers/block/cpqarray.c
--- linux-2.6.18-rc1/drivers/block/cpqarray.c	2006-07-15 22:34:42.028937956 +0000
+++ linux-2.6.18-rc2/drivers/block/cpqarray.c	2006-07-15 22:34:47.273507244 +0000
@@ -1739,8 +1739,6 @@
 	     (log_index < id_ctlr_buf->nr_drvs)
 	     && (log_unit < NWD);
 	     log_unit++) {
-		struct gendisk *disk = ida_gendisk[ctlr][log_unit];
-
 		size = sizeof(sense_log_drv_stat_t);
 
 		/*
diff -urN linux-2.6.18-rc1/drivers/block/rd.c linux-2.6.18-rc2/drivers/block/rd.c
--- linux-2.6.18-rc1/drivers/block/rd.c	2006-07-15 22:34:42.032938390 +0000
+++ linux-2.6.18-rc2/drivers/block/rd.c	2006-07-15 22:34:47.277507679 +0000
@@ -84,7 +84,7 @@
  * behaviour. The default is still BLOCK_SIZE (needed by rd_load_image that
  * supposes the filesystem in the image uses a BLOCK_SIZE blocksize).
  */
-static int rd_blocksize = BLOCK_SIZE;		/* blocksize of the RAM disks */
+static int rd_blocksize = CONFIG_BLK_DEV_RAM_BLOCKSIZE;
 
 /*
  * Copyright (C) 2000 Linus Torvalds.
diff -urN linux-2.6.18-rc1/drivers/bluetooth/bcm203x.c linux-2.6.18-rc2/drivers/bluetooth/bcm203x.c
--- linux-2.6.18-rc1/drivers/bluetooth/bcm203x.c	2006-07-15 22:34:42.036938824 +0000
+++ linux-2.6.18-rc2/drivers/bluetooth/bcm203x.c	2006-07-15 22:34:47.281508113 +0000
@@ -234,6 +234,7 @@
 	data->fw_data = kmalloc(firmware->size, GFP_KERNEL);
 	if (!data->fw_data) {
 		BT_ERR("Can't allocate memory for firmware image");
+		release_firmware(firmware);
 		usb_free_urb(data->urb);
 		kfree(data->buffer);
 		kfree(data);
diff -urN linux-2.6.18-rc1/drivers/bluetooth/hci_ldisc.c linux-2.6.18-rc2/drivers/bluetooth/hci_ldisc.c
--- linux-2.6.18-rc1/drivers/bluetooth/hci_ldisc.c	2006-07-15 22:34:42.040939258 +0000
+++ linux-2.6.18-rc2/drivers/bluetooth/hci_ldisc.c	2006-07-15 22:34:47.285508547 +0000
@@ -191,7 +191,7 @@
 
 	/* Flush any pending characters in the driver and discipline. */
 	tty_ldisc_flush(tty);
-	if (tty->driver->flush_buffer)
+	if (tty->driver && tty->driver->flush_buffer)
 		tty->driver->flush_buffer(tty);
 
 	if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
@@ -290,7 +290,7 @@
 	if (tty->ldisc.flush_buffer)
 		tty->ldisc.flush_buffer(tty);
 
-	if (tty->driver->flush_buffer)
+	if (tty->driver && tty->driver->flush_buffer)
 		tty->driver->flush_buffer(tty);
 
 	return 0;
diff -urN linux-2.6.18-rc1/drivers/cdrom/cdrom.c linux-2.6.18-rc2/drivers/cdrom/cdrom.c
--- linux-2.6.18-rc1/drivers/cdrom/cdrom.c	2006-07-15 22:34:42.044939693 +0000
+++ linux-2.6.18-rc2/drivers/cdrom/cdrom.c	2006-07-15 22:34:47.289508981 +0000
@@ -1837,7 +1837,7 @@
 	init_cdrom_command(&cgc, buf, sizeof(buf), CGC_DATA_READ);
 	cgc.cmd[0] = GPCMD_READ_DVD_STRUCTURE;
 	cgc.cmd[7] = s->type;
-	cgc.cmd[9] = cgc.buflen = 0xff;
+	cgc.cmd[9] = cgc.buflen & 0xff;
 
 	if ((ret = cdo->generic_packet(cdi, &cgc)))
 		return ret;
diff -urN linux-2.6.18-rc1/drivers/char/hvsi.c linux-2.6.18-rc2/drivers/char/hvsi.c
--- linux-2.6.18-rc1/drivers/char/hvsi.c	2006-07-15 22:34:42.072942732 +0000
+++ linux-2.6.18-rc2/drivers/char/hvsi.c	2006-07-15 22:34:47.321512455 +0000
@@ -1299,7 +1299,7 @@
 		hp->inbuf_end = hp->inbuf;
 		hp->state = HVSI_CLOSED;
 		hp->vtermno = *vtermno;
-		hp->virq = irq_create_mapping(NULL, irq[0], 0);
+		hp->virq = irq_create_mapping(NULL, irq[0]);
 		if (hp->virq == NO_IRQ) {
 			printk(KERN_ERR "%s: couldn't create irq mapping for 0x%x\n",
 				__FUNCTION__, irq[0]);
diff -urN linux-2.6.18-rc1/drivers/char/ip2/ip2main.c linux-2.6.18-rc2/drivers/char/ip2/ip2main.c
--- linux-2.6.18-rc1/drivers/char/ip2/ip2main.c	2006-07-15 22:34:42.080943601 +0000
+++ linux-2.6.18-rc2/drivers/char/ip2/ip2main.c	2006-07-15 22:34:47.325512889 +0000
@@ -3186,3 +3186,10 @@
 
 
 MODULE_LICENSE("GPL");
+
+static struct pci_device_id ip2main_pci_tbl[] __devinitdata = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_IP2EX) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(pci, ip2main_pci_tbl);
diff -urN linux-2.6.18-rc1/drivers/char/mem.c linux-2.6.18-rc2/drivers/char/mem.c
--- linux-2.6.18-rc1/drivers/char/mem.c	2006-07-15 22:34:42.092944903 +0000
+++ linux-2.6.18-rc2/drivers/char/mem.c	2006-07-15 22:34:47.337514192 +0000
@@ -95,7 +95,7 @@
 	return 1;
 }
 
-static inline int valid_mmap_phys_addr_range(unsigned long addr, size_t size)
+static inline int valid_mmap_phys_addr_range(unsigned long pfn, size_t size)
 {
 	return 1;
 }
@@ -242,7 +242,7 @@
 {
 	size_t size = vma->vm_end - vma->vm_start;
 
-	if (!valid_mmap_phys_addr_range(vma->vm_pgoff << PAGE_SHIFT, size))
+	if (!valid_mmap_phys_addr_range(vma->vm_pgoff, size))
 		return -EINVAL;
 
 	vma->vm_page_prot = phys_mem_access_prot(file, vma->vm_pgoff,
diff -urN linux-2.6.18-rc1/drivers/char/nsc_gpio.c linux-2.6.18-rc2/drivers/char/nsc_gpio.c
--- linux-2.6.18-rc1/drivers/char/nsc_gpio.c	2006-07-15 22:34:42.096945338 +0000
+++ linux-2.6.18-rc2/drivers/char/nsc_gpio.c	2006-07-15 22:34:47.341514626 +0000
@@ -68,13 +68,11 @@
 			amp->gpio_config(m, ~1, 0);
 			break;
 		case 'T':
-			dev_dbg(dev, "GPIO%d output is push pull\n",
-			       m);
+			dev_dbg(dev, "GPIO%d output is push pull\n", m);
 			amp->gpio_config(m, ~2, 2);
 			break;
 		case 't':
-			dev_dbg(dev, "GPIO%d output is open drain\n",
-			       m);
+			dev_dbg(dev, "GPIO%d output is open drain\n", m);
 			amp->gpio_config(m, ~2, 0);
 			break;
 		case 'P':
diff -urN linux-2.6.18-rc1/drivers/char/pc8736x_gpio.c linux-2.6.18-rc2/drivers/char/pc8736x_gpio.c
--- linux-2.6.18-rc1/drivers/char/pc8736x_gpio.c	2006-07-15 22:34:42.100945772 +0000
+++ linux-2.6.18-rc2/drivers/char/pc8736x_gpio.c	2006-07-15 22:34:47.345515061 +0000
@@ -3,18 +3,18 @@
    National Semiconductor PC8736x GPIO driver.  Allows a user space
    process to play with the GPIO pins.
 
-   Copyright (c) 2005 Jim Cromie <jim.cromie@gmail.com>
+   Copyright (c) 2005,2006 Jim Cromie <jim.cromie@gmail.com>
 
    adapted from linux/drivers/char/scx200_gpio.c
    Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>,
 */
 
-#include <linux/config.h>
 #include <linux/fs.h>
 #include <linux/module.h>
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/cdev.h>
 #include <linux/io.h>
 #include <linux/ioport.h>
 #include <linux/mutex.h>
@@ -25,7 +25,7 @@
 #define DEVNAME "pc8736x_gpio"
 
 MODULE_AUTHOR("Jim Cromie <jim.cromie@gmail.com>");
-MODULE_DESCRIPTION("NatSemi PC-8736x GPIO Pin Driver");
+MODULE_DESCRIPTION("NatSemi/Winbond PC-8736x GPIO Pin Driver");
 MODULE_LICENSE("GPL");
 
 static int major;		/* default to dynamic major */
@@ -38,14 +38,14 @@
 
 #define SIO_BASE1       0x2E	/* 1st command-reg to check */
 #define SIO_BASE2       0x4E	/* alt command-reg to check */
-#define SIO_BASE_OFFSET 0x20
 
 #define SIO_SID		0x20	/* SuperI/O ID Register */
 #define SIO_SID_VALUE	0xe9	/* Expected value in SuperI/O ID Register */
 
 #define SIO_CF1		0x21	/* chip config, bit0 is chip enable */
 
-#define PC8736X_GPIO_SIZE	16
+#define PC8736X_GPIO_RANGE	16 /* ioaddr range */
+#define PC8736X_GPIO_CT		32 /* minors matching 4 8 bit ports */
 
 #define SIO_UNIT_SEL	0x7	/* unit select reg */
 #define SIO_UNIT_ACT	0x30	/* unit enable */
@@ -212,31 +212,30 @@
 	pc8736x_gpio_set(index, !pc8736x_gpio_current(index));
 }
 
-static struct nsc_gpio_ops pc8736x_access = {
+static struct nsc_gpio_ops pc8736x_gpio_ops = {
 	.owner		= THIS_MODULE,
 	.gpio_config	= pc8736x_gpio_configure,
 	.gpio_dump	= nsc_gpio_dump,
 	.gpio_get	= pc8736x_gpio_get,
 	.gpio_set	= pc8736x_gpio_set,
-	.gpio_set_high	= pc8736x_gpio_set_high,
-	.gpio_set_low	= pc8736x_gpio_set_low,
 	.gpio_change	= pc8736x_gpio_change,
 	.gpio_current	= pc8736x_gpio_current
 };
+EXPORT_SYMBOL(pc8736x_gpio_ops);
 
 static int pc8736x_gpio_open(struct inode *inode, struct file *file)
 {
 	unsigned m = iminor(inode);
-	file->private_data = &pc8736x_access;
+	file->private_data = &pc8736x_gpio_ops;
 
 	dev_dbg(&pdev->dev, "open %d\n", m);
 
-	if (m > 63)
+	if (m >= PC8736X_GPIO_CT)
 		return -EINVAL;
 	return nonseekable_open(inode, file);
 }
 
-static const struct file_operations pc8736x_gpio_fops = {
+static const struct file_operations pc8736x_gpio_fileops = {
 	.owner	= THIS_MODULE,
 	.open	= pc8736x_gpio_open,
 	.write	= nsc_gpio_write,
@@ -255,9 +254,12 @@
 
 }
 
+static struct cdev pc8736x_gpio_cdev;
+
 static int __init pc8736x_gpio_init(void)
 {
-	int rc = 0;
+	int rc;
+	dev_t devid;
 
 	pdev = platform_device_alloc(DEVNAME, 0);
 	if (!pdev)
@@ -275,7 +277,7 @@
 		dev_err(&pdev->dev, "no device found\n");
 		goto undo_platform_dev_add;
 	}
-	pc8736x_access.dev = &pdev->dev;
+	pc8736x_gpio_ops.dev = &pdev->dev;
 
 	/* Verify that chip and it's GPIO unit are both enabled.
 	   My BIOS does this, so I take minimum action here
@@ -297,7 +299,7 @@
 	pc8736x_gpio_base = (superio_inb(SIO_BASE_HADDR) << 8
 			     | superio_inb(SIO_BASE_LADDR));
 
-	if (!request_region(pc8736x_gpio_base, 16, DEVNAME)) {
+	if (!request_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE, DEVNAME)) {
 		rc = -ENODEV;
 		dev_err(&pdev->dev, "GPIO ioport %x busy\n",
 			pc8736x_gpio_base);
@@ -305,10 +307,17 @@
 	}
 	dev_info(&pdev->dev, "GPIO ioport %x reserved\n", pc8736x_gpio_base);
 
-	rc = register_chrdev(major, DEVNAME, &pc8736x_gpio_fops);
+	if (major) {
+		devid = MKDEV(major, 0);
+		rc = register_chrdev_region(devid, PC8736X_GPIO_CT, DEVNAME);
+	} else {
+		rc = alloc_chrdev_region(&devid, 0, PC8736X_GPIO_CT, DEVNAME);
+		major = MAJOR(devid);
+	}
+
 	if (rc < 0) {
 		dev_err(&pdev->dev, "register-chrdev failed: %d\n", rc);
-		goto undo_platform_dev_add;
+		goto undo_request_region;
 	}
 	if (!major) {
 		major = rc;
@@ -316,8 +325,15 @@
 	}
 
 	pc8736x_init_shadow();
+
+	/* ignore minor errs, and succeed */
+	cdev_init(&pc8736x_gpio_cdev, &pc8736x_gpio_fileops);
+	cdev_add(&pc8736x_gpio_cdev, devid, PC8736X_GPIO_CT);
+
 	return 0;
 
+undo_request_region:
+	release_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE);
 undo_platform_dev_add:
 	platform_device_del(pdev);
 undo_platform_dev_alloc:
@@ -328,14 +344,15 @@
 
 static void __exit pc8736x_gpio_cleanup(void)
 {
-	dev_dbg(&pdev->dev, " cleanup\n");
+	dev_dbg(&pdev->dev, "cleanup\n");
 
-	release_region(pc8736x_gpio_base, 16);
+	cdev_del(&pc8736x_gpio_cdev);
+	unregister_chrdev_region(MKDEV(major,0), PC8736X_GPIO_CT);
+	release_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE);
 
-	unregister_chrdev(major, DEVNAME);
+	platform_device_del(pdev);
+	platform_device_put(pdev);
 }
 
-EXPORT_SYMBOL(pc8736x_access);
-
 module_init(pc8736x_gpio_init);
 module_exit(pc8736x_gpio_cleanup);
diff -urN linux-2.6.18-rc1/drivers/char/rtc.c linux-2.6.18-rc2/drivers/char/rtc.c
--- linux-2.6.18-rc1/drivers/char/rtc.c	2006-07-15 22:34:42.112947075 +0000
+++ linux-2.6.18-rc2/drivers/char/rtc.c	2006-07-15 22:34:47.357516363 +0000
@@ -46,13 +46,12 @@
  *      1.11a   Daniele Bellucci: Audit create_proc_read_entry in rtc_init
  *	1.12	Venkatesh Pallipadi: Hooks for emulating rtc on HPET base-timer
  *		CONFIG_HPET_EMULATE_RTC
+ *	1.12a	Maciej W. Rozycki: Handle memory-mapped chips properly.
  *	1.12ac	Alan Cox: Allow read access to the day of week register
  */
 
 #define RTC_VERSION		"1.12ac"
 
-#define RTC_IO_EXTENT	0x8
-
 /*
  *	Note that *all* calls to CMOS_READ and CMOS_WRITE are done with
  *	interrupts disabled. Due to the index-port/data-port (0x70/0x71)
@@ -337,7 +336,15 @@
 	if (rtc_has_irq == 0)
 		return -EIO;
 
-	if (count < sizeof(unsigned))
+	/*
+	 * Historically this function used to assume that sizeof(unsigned long)
+	 * is the same in userspace and kernelspace.  This lead to problems
+	 * for configurations with multiple ABIs such a the MIPS o32 and 64
+	 * ABIs supported on the same kernel.  So now we support read of both
+	 * 4 and 8 bytes and assume that's the sizeof(unsigned long) in the
+	 * userspace ABI.
+	 */
+	if (count != sizeof(unsigned int) && count !=  sizeof(unsigned long))
 		return -EINVAL;
 
 	add_wait_queue(&rtc_wait, &wait);
@@ -368,10 +375,12 @@
 		schedule();
 	} while (1);
 
-	if (count < sizeof(unsigned long))
-		retval = put_user(data, (unsigned int __user *)buf) ?: sizeof(int); 
+	if (count == sizeof(unsigned int))
+		retval = put_user(data, (unsigned int __user *)buf) ?: sizeof(int);
 	else
 		retval = put_user(data, (unsigned long __user *)buf) ?: sizeof(long);
+	if (!retval)
+		retval = count;
  out:
 	current->state = TASK_RUNNING;
 	remove_wait_queue(&rtc_wait, &wait);
@@ -923,6 +932,9 @@
 	struct sparc_isa_device *isa_dev;
 #endif
 #endif
+#ifndef __sparc__
+	void *r;
+#endif
 
 #ifdef __sparc__
 	for_each_ebus(ebus) {
@@ -964,8 +976,13 @@
 	}
 no_irq:
 #else
-	if (!request_region(RTC_PORT(0), RTC_IO_EXTENT, "rtc")) {
-		printk(KERN_ERR "rtc: I/O port %d is not free.\n", RTC_PORT (0));
+	if (RTC_IOMAPPED)
+		r = request_region(RTC_PORT(0), RTC_IO_EXTENT, "rtc");
+	else
+		r = request_mem_region(RTC_PORT(0), RTC_IO_EXTENT, "rtc");
+	if (!r) {
+		printk(KERN_ERR "rtc: I/O resource %lx is not free.\n",
+		       (long)(RTC_PORT(0)));
 		return -EIO;
 	}
 
@@ -979,7 +996,10 @@
 	if(request_irq(RTC_IRQ, rtc_int_handler_ptr, IRQF_DISABLED, "rtc", NULL)) {
 		/* Yeah right, seeing as irq 8 doesn't even hit the bus. */
 		printk(KERN_ERR "rtc: IRQ %d is not free.\n", RTC_IRQ);
-		release_region(RTC_PORT(0), RTC_IO_EXTENT);
+		if (RTC_IOMAPPED)
+			release_region(RTC_PORT(0), RTC_IO_EXTENT);
+		else
+			release_mem_region(RTC_PORT(0), RTC_IO_EXTENT);
 		return -EIO;
 	}
 	hpet_rtc_timer_init();
@@ -1079,7 +1099,10 @@
 	if (rtc_has_irq)
 		free_irq (rtc_irq, &rtc_port);
 #else
-	release_region (RTC_PORT (0), RTC_IO_EXTENT);
+	if (RTC_IOMAPPED)
+		release_region(RTC_PORT(0), RTC_IO_EXTENT);
+	else
+		release_mem_region(RTC_PORT(0), RTC_IO_EXTENT);
 #ifdef RTC_IRQ
 	if (rtc_has_irq)
 		free_irq (RTC_IRQ, NULL);
@@ -1222,7 +1245,7 @@
 
 void rtc_get_rtc_time(struct rtc_time *rtc_tm)
 {
-	unsigned long uip_watchdog = jiffies;
+	unsigned long uip_watchdog = jiffies, flags;
 	unsigned char ctrl;
 #ifdef CONFIG_MACH_DECSTATION
 	unsigned int real_year;
@@ -1249,7 +1272,7 @@
 	 * RTC has RTC_DAY_OF_WEEK, we should usually ignore it, as it is
 	 * only updated by the RTC when initially set to a non-zero value.
 	 */
-	spin_lock_irq(&rtc_lock);
+	spin_lock_irqsave(&rtc_lock, flags);
 	rtc_tm->tm_sec = CMOS_READ(RTC_SECONDS);
 	rtc_tm->tm_min = CMOS_READ(RTC_MINUTES);
 	rtc_tm->tm_hour = CMOS_READ(RTC_HOURS);
@@ -1263,7 +1286,7 @@
 	real_year = CMOS_READ(RTC_DEC_YEAR);
 #endif
 	ctrl = CMOS_READ(RTC_CONTROL);
-	spin_unlock_irq(&rtc_lock);
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
 	{
diff -urN linux-2.6.18-rc1/drivers/char/scx200_gpio.c linux-2.6.18-rc2/drivers/char/scx200_gpio.c
--- linux-2.6.18-rc1/drivers/char/scx200_gpio.c	2006-07-15 22:34:42.112947075 +0000
+++ linux-2.6.18-rc2/drivers/char/scx200_gpio.c	2006-07-15 22:34:47.357516363 +0000
@@ -5,7 +5,6 @@
 
    Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com> */
 
-#include <linux/config.h>
 #include <linux/device.h>
 #include <linux/fs.h>
 #include <linux/module.h>
@@ -22,37 +21,37 @@
 #include <linux/scx200_gpio.h>
 #include <linux/nsc_gpio.h>
 
-#define NAME "scx200_gpio"
-#define DEVNAME NAME
+#define DRVNAME "scx200_gpio"
 
 static struct platform_device *pdev;
 
 MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>");
-MODULE_DESCRIPTION("NatSemi SCx200 GPIO Pin Driver");
+MODULE_DESCRIPTION("NatSemi/AMD SCx200 GPIO Pin Driver");
 MODULE_LICENSE("GPL");
 
 static int major = 0;		/* default to dynamic major */
 module_param(major, int, 0);
 MODULE_PARM_DESC(major, "Major device number");
 
-struct nsc_gpio_ops scx200_access = {
+#define MAX_PINS 32		/* 64 later, when known ok */
+
+struct nsc_gpio_ops scx200_gpio_ops = {
 	.owner		= THIS_MODULE,
 	.gpio_config	= scx200_gpio_configure,
 	.gpio_dump	= nsc_gpio_dump,
 	.gpio_get	= scx200_gpio_get,
 	.gpio_set	= scx200_gpio_set,
-	.gpio_set_high	= scx200_gpio_set_high,
-	.gpio_set_low	= scx200_gpio_set_low,
 	.gpio_change	= scx200_gpio_change,
 	.gpio_current	= scx200_gpio_current
 };
+EXPORT_SYMBOL(scx200_gpio_ops);
 
 static int scx200_gpio_open(struct inode *inode, struct file *file)
 {
 	unsigned m = iminor(inode);
-	file->private_data = &scx200_access;
+	file->private_data = &scx200_gpio_ops;
 
-	if (m > 63)
+	if (m >= MAX_PINS)
 		return -EINVAL;
 	return nonseekable_open(inode, file);
 }
@@ -62,8 +61,7 @@
 	return 0;
 }
 
-
-static const struct file_operations scx200_gpio_fops = {
+static const struct file_operations scx200_gpio_fileops = {
 	.owner   = THIS_MODULE,
 	.write   = nsc_gpio_write,
 	.read    = nsc_gpio_read,
@@ -71,21 +69,20 @@
 	.release = scx200_gpio_release,
 };
 
-struct cdev *scx200_devices;
-static int num_pins = 32;
+struct cdev scx200_gpio_cdev;  /* use 1 cdev for all pins */
 
 static int __init scx200_gpio_init(void)
 {
-	int rc, i;
-	dev_t dev = MKDEV(major, 0);
+	int rc;
+	dev_t devid;
 
 	if (!scx200_gpio_present()) {
-		printk(KERN_ERR NAME ": no SCx200 gpio present\n");
+		printk(KERN_ERR DRVNAME ": no SCx200 gpio present\n");
 		return -ENODEV;
 	}
 
 	/* support dev_dbg() with pdev->dev */
-	pdev = platform_device_alloc(DEVNAME, 0);
+	pdev = platform_device_alloc(DRVNAME, 0);
 	if (!pdev)
 		return -ENOMEM;
 
@@ -94,37 +91,25 @@
 		goto undo_malloc;
 
 	/* nsc_gpio uses dev_dbg(), so needs this */
-	scx200_access.dev = &pdev->dev;
+	scx200_gpio_ops.dev = &pdev->dev;
 
-	if (major)
-		rc = register_chrdev_region(dev, num_pins, "scx200_gpio");
-	else {
-		rc = alloc_chrdev_region(&dev, 0, num_pins, "scx200_gpio");
-		major = MAJOR(dev);
+	if (major) {
+		devid = MKDEV(major, 0);
+		rc = register_chrdev_region(devid, MAX_PINS, "scx200_gpio");
+	} else {
+		rc = alloc_chrdev_region(&devid, 0, MAX_PINS, "scx200_gpio");
+		major = MAJOR(devid);
 	}
 	if (rc < 0) {
 		dev_err(&pdev->dev, "SCx200 chrdev_region err: %d\n", rc);
 		goto undo_platform_device_add;
 	}
-	scx200_devices = kzalloc(num_pins * sizeof(struct cdev), GFP_KERNEL);
-	if (!scx200_devices) {
-		rc = -ENOMEM;
-		goto undo_chrdev_region;
-	}
-	for (i = 0; i < num_pins; i++) {
-		struct cdev *cdev = &scx200_devices[i];
-		cdev_init(cdev, &scx200_gpio_fops);
-		cdev->owner = THIS_MODULE;
-		rc = cdev_add(cdev, MKDEV(major, i), 1);
-		/* tolerate 'minor' errors */
-		if (rc)
-			dev_err(&pdev->dev, "Error %d on minor %d", rc, i);
-	}
+
+	cdev_init(&scx200_gpio_cdev, &scx200_gpio_fileops);
+	cdev_add(&scx200_gpio_cdev, devid, MAX_PINS);
 
 	return 0; /* succeed */
 
-undo_chrdev_region:
-	unregister_chrdev_region(dev, num_pins);
 undo_platform_device_add:
 	platform_device_del(pdev);
 undo_malloc:
@@ -135,10 +120,11 @@
 
 static void __exit scx200_gpio_cleanup(void)
 {
-	kfree(scx200_devices);
-	unregister_chrdev_region(MKDEV(major, 0), num_pins);
+	cdev_del(&scx200_gpio_cdev);
+	/* cdev_put(&scx200_gpio_cdev); */
+
+	unregister_chrdev_region(MKDEV(major, 0), MAX_PINS);
 	platform_device_unregister(pdev);
-	/* kfree(pdev); */
 }
 
 module_init(scx200_gpio_init);
diff -urN linux-2.6.18-rc1/drivers/char/snsc_event.c linux-2.6.18-rc2/drivers/char/snsc_event.c
--- linux-2.6.18-rc1/drivers/char/snsc_event.c	2006-07-15 22:34:42.112947075 +0000
+++ linux-2.6.18-rc2/drivers/char/snsc_event.c	2006-07-15 22:34:47.361516798 +0000
@@ -220,20 +220,7 @@
 			       " Sending SIGPWR to init...\n");
 
 		/* give a SIGPWR signal to init proc */
-
-		/* first find init's task */
-		read_lock(&tasklist_lock);
-		for_each_process(p) {
-			if (p->pid == 1)
-				break;
-		}
-		if (p) {
-			force_sig(SIGPWR, p);
-		} else {
-			printk(KERN_ERR "Failed to signal init!\n");
-			snsc_shutting_down = 0; /* so can try again (?) */
-		}
-		read_unlock(&tasklist_lock);
+		kill_proc(1, SIGPWR, 0);
 	} else {
 		/* print to system log */
 		printk("%s|$(0x%x)%s\n", severity, esp_code, desc);
diff -urN linux-2.6.18-rc1/drivers/char/specialix.c linux-2.6.18-rc2/drivers/char/specialix.c
--- linux-2.6.18-rc1/drivers/char/specialix.c	2006-07-15 22:34:42.116947509 +0000
+++ linux-2.6.18-rc2/drivers/char/specialix.c	2006-07-15 22:34:47.361516798 +0000
@@ -2584,6 +2584,12 @@
 	func_exit();
 }
 
+static struct pci_device_id specialx_pci_tbl[] __devinitdata = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_IO8) },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, specialx_pci_tbl);
+
 module_init(specialix_init_module);
 module_exit(specialix_exit_module);
 
diff -urN linux-2.6.18-rc1/drivers/char/tpm/tpm.c linux-2.6.18-rc2/drivers/char/tpm/tpm.c
--- linux-2.6.18-rc1/drivers/char/tpm/tpm.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/char/tpm/tpm.c	2006-07-15 22:34:47.373518100 +0000
@@ -1141,6 +1141,7 @@
 		put_device(dev);
 		clear_bit(chip->dev_num, dev_mask);
 		kfree(chip);
+		kfree(devname);
 		return NULL;
 	}
 
diff -urN linux-2.6.18-rc1/drivers/char/tpm/tpm_tis.c linux-2.6.18-rc2/drivers/char/tpm/tpm_tis.c
--- linux-2.6.18-rc1/drivers/char/tpm/tpm_tis.c	2006-07-15 22:34:42.128948812 +0000
+++ linux-2.6.18-rc2/drivers/char/tpm/tpm_tis.c	2006-07-15 22:34:47.373518100 +0000
@@ -424,6 +424,7 @@
 	iowrite32(interrupt,
 		  chip->vendor.iobase +
 		  TPM_INT_STATUS(chip->vendor.locality));
+	ioread32(chip->vendor.iobase + TPM_INT_STATUS(chip->vendor.locality));
 	return IRQ_HANDLED;
 }
 
@@ -431,23 +432,19 @@
 module_param(interrupts, bool, 0444);
 MODULE_PARM_DESC(interrupts, "Enable interrupts");
 
-static int __devinit tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
-				      const struct pnp_device_id *pnp_id)
+static int tpm_tis_init(struct device *dev, resource_size_t start,
+			resource_size_t len)
 {
 	u32 vendor, intfcaps, intmask;
 	int rc, i;
-	unsigned long start, len;
 	struct tpm_chip *chip;
 
-	start = pnp_mem_start(pnp_dev, 0);
-	len = pnp_mem_len(pnp_dev, 0);
-
 	if (!start)
 		start = TIS_MEM_BASE;
 	if (!len)
 		len = TIS_MEM_LEN;
 
-	if (!(chip = tpm_register_hardware(&pnp_dev->dev, &tpm_tis)))
+	if (!(chip = tpm_register_hardware(dev, &tpm_tis)))
 		return -ENODEV;
 
 	chip->vendor.iobase = ioremap(start, len);
@@ -464,7 +461,7 @@
 	chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
 	chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
 
-	dev_info(&pnp_dev->dev,
+	dev_info(dev,
 		 "1.2 TPM (device-id 0x%X, rev-id %d)\n",
 		 vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
 
@@ -472,26 +469,26 @@
 	intfcaps =
 	    ioread32(chip->vendor.iobase +
 		     TPM_INTF_CAPS(chip->vendor.locality));
-	dev_dbg(&pnp_dev->dev, "TPM interface capabilities (0x%x):\n",
+	dev_dbg(dev, "TPM interface capabilities (0x%x):\n",
 		intfcaps);
 	if (intfcaps & TPM_INTF_BURST_COUNT_STATIC)
-		dev_dbg(&pnp_dev->dev, "\tBurst Count Static\n");
+		dev_dbg(dev, "\tBurst Count Static\n");
 	if (intfcaps & TPM_INTF_CMD_READY_INT)
-		dev_dbg(&pnp_dev->dev, "\tCommand Ready Int Support\n");
+		dev_dbg(dev, "\tCommand Ready Int Support\n");
 	if (intfcaps & TPM_INTF_INT_EDGE_FALLING)
-		dev_dbg(&pnp_dev->dev, "\tInterrupt Edge Falling\n");
+		dev_dbg(dev, "\tInterrupt Edge Falling\n");
 	if (intfcaps & TPM_INTF_INT_EDGE_RISING)
-		dev_dbg(&pnp_dev->dev, "\tInterrupt Edge Rising\n");
+		dev_dbg(dev, "\tInterrupt Edge Rising\n");
 	if (intfcaps & TPM_INTF_INT_LEVEL_LOW)
-		dev_dbg(&pnp_dev->dev, "\tInterrupt Level Low\n");
+		dev_dbg(dev, "\tInterrupt Level Low\n");
 	if (intfcaps & TPM_INTF_INT_LEVEL_HIGH)
-		dev_dbg(&pnp_dev->dev, "\tInterrupt Level High\n");
+		dev_dbg(dev, "\tInterrupt Level High\n");
 	if (intfcaps & TPM_INTF_LOCALITY_CHANGE_INT)
-		dev_dbg(&pnp_dev->dev, "\tLocality Change Int Support\n");
+		dev_dbg(dev, "\tLocality Change Int Support\n");
 	if (intfcaps & TPM_INTF_STS_VALID_INT)
-		dev_dbg(&pnp_dev->dev, "\tSts Valid Int Support\n");
+		dev_dbg(dev, "\tSts Valid Int Support\n");
 	if (intfcaps & TPM_INTF_DATA_AVAIL_INT)
-		dev_dbg(&pnp_dev->dev, "\tData Avail Int Support\n");
+		dev_dbg(dev, "\tData Avail Int Support\n");
 
 	if (request_locality(chip, 0) != 0) {
 		rc = -ENODEV;
@@ -594,6 +591,16 @@
 	return rc;
 }
 
+static int __devinit tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
+				      const struct pnp_device_id *pnp_id)
+{
+	resource_size_t start, len;
+	start = pnp_mem_start(pnp_dev, 0);
+	len = pnp_mem_len(pnp_dev, 0);
+
+	return tpm_tis_init(&pnp_dev->dev, start, len);
+}
+
 static int tpm_tis_pnp_suspend(struct pnp_dev *dev, pm_message_t msg)
 {
 	return tpm_pm_suspend(&dev->dev, msg);
@@ -628,8 +635,36 @@
 		    sizeof(tpm_pnp_tbl[TIS_HID_USR_IDX].id), 0444);
 MODULE_PARM_DESC(hid, "Set additional specific HID for this driver to probe");
 
+static struct device_driver tis_drv = {
+	.name = "tpm_tis",
+	.bus = &platform_bus_type,
+	.owner = THIS_MODULE,
+	.suspend = tpm_pm_suspend,
+	.resume = tpm_pm_resume,
+};
+
+static struct platform_device *pdev;
+
+static int force;
+module_param(force, bool, 0444);
+MODULE_PARM_DESC(force, "Force device probe rather than using ACPI entry");
 static int __init init_tis(void)
 {
+	int rc;
+
+	if (force) {
+		rc = driver_register(&tis_drv);
+		if (rc < 0)
+			return rc;
+		if (IS_ERR(pdev=platform_device_register_simple("tpm_tis", -1, NULL, 0)))
+			return PTR_ERR(pdev);
+		if((rc=tpm_tis_init(&pdev->dev, 0, 0)) != 0) {
+			platform_device_unregister(pdev);
+			driver_unregister(&tis_drv);
+		}
+		return rc;
+	}
+
 	return pnp_register_driver(&tis_pnp_driver);
 }
 
@@ -654,7 +689,11 @@
 		tpm_remove_hardware(chip->dev);
 	}
 	spin_unlock(&tis_lock);
-	pnp_unregister_driver(&tis_pnp_driver);
+	if (force) {
+		platform_device_unregister(pdev);
+		driver_unregister(&tis_drv);
+	} else
+		pnp_unregister_driver(&tis_pnp_driver);
 }
 
 module_init(init_tis);
diff -urN linux-2.6.18-rc1/drivers/char/vr41xx_giu.c linux-2.6.18-rc2/drivers/char/vr41xx_giu.c
--- linux-2.6.18-rc1/drivers/char/vr41xx_giu.c	2006-07-15 22:34:42.128948812 +0000
+++ linux-2.6.18-rc2/drivers/char/vr41xx_giu.c	2006-07-15 22:34:47.377518535 +0000
@@ -33,6 +33,7 @@
 #include <asm/cpu.h>
 #include <asm/io.h>
 #include <asm/vr41xx/giu.h>
+#include <asm/vr41xx/irq.h>
 #include <asm/vr41xx/vr41xx.h>
 
 MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
diff -urN linux-2.6.18-rc1/drivers/cpufreq/cpufreq.c linux-2.6.18-rc2/drivers/cpufreq/cpufreq.c
--- linux-2.6.18-rc1/drivers/cpufreq/cpufreq.c	2006-07-15 22:34:42.144950549 +0000
+++ linux-2.6.18-rc2/drivers/cpufreq/cpufreq.c	2006-07-15 22:34:47.389519837 +0000
@@ -423,6 +423,8 @@
 	if (cpufreq_parse_governor(str_governor, &new_policy.policy, &new_policy.governor))
 		return -EINVAL;
 
+	lock_cpu_hotplug();
+
 	/* Do not use cpufreq_set_policy here or the user_policy.max
 	   will be wrongly overridden */
 	mutex_lock(&policy->lock);
@@ -432,6 +434,8 @@
 	policy->user_policy.governor = policy->governor;
 	mutex_unlock(&policy->lock);
 
+	unlock_cpu_hotplug();
+
 	return ret ? ret : count;
 }
 
diff -urN linux-2.6.18-rc1/drivers/crypto/padlock-aes.c linux-2.6.18-rc2/drivers/crypto/padlock-aes.c
--- linux-2.6.18-rc1/drivers/crypto/padlock-aes.c	2006-07-15 22:34:42.144950549 +0000
+++ linux-2.6.18-rc2/drivers/crypto/padlock-aes.c	2006-07-15 22:34:47.393520272 +0000
@@ -59,6 +59,9 @@
 #define AES_EXTENDED_KEY_SIZE	64	/* in uint32_t units */
 #define AES_EXTENDED_KEY_SIZE_B	(AES_EXTENDED_KEY_SIZE * sizeof(uint32_t))
 
+/* Whenever making any changes to the following
+ * structure *make sure* you keep E, d_data
+ * and cword aligned on 16 Bytes boundaries!!! */
 struct aes_ctx {
 	struct {
 		struct cword encrypt;
@@ -66,8 +69,10 @@
 	} cword;
 	u32 *D;
 	int key_length;
-	u32 E[AES_EXTENDED_KEY_SIZE];
-	u32 d_data[AES_EXTENDED_KEY_SIZE];
+	u32 E[AES_EXTENDED_KEY_SIZE]
+		__attribute__ ((__aligned__(PADLOCK_ALIGNMENT)));
+	u32 d_data[AES_EXTENDED_KEY_SIZE]
+		__attribute__ ((__aligned__(PADLOCK_ALIGNMENT)));
 };
 
 /* ====== Key management routines ====== */
diff -urN linux-2.6.18-rc1/drivers/edac/edac_mc.c linux-2.6.18-rc2/drivers/edac/edac_mc.c
--- linux-2.6.18-rc1/drivers/edac/edac_mc.c	2006-07-15 22:34:42.152951417 +0000
+++ linux-2.6.18-rc2/drivers/edac/edac_mc.c	2006-07-15 22:34:47.397520706 +0000
@@ -1,6 +1,6 @@
 /*
  * edac_mc kernel module
- * (C) 2005 Linux Networx (http://lnxi.com)
+ * (C) 2005, 2006 Linux Networx (http://lnxi.com)
  * This file may be distributed under the terms of the
  * GNU General Public License.
  *
@@ -33,13 +33,8 @@
 #include <asm/edac.h>
 #include "edac_mc.h"
 
-#define EDAC_MC_VERSION "Ver: 2.0.0 " __DATE__
+#define EDAC_MC_VERSION "Ver: 2.0.1 " __DATE__
 
-/* For now, disable the EDAC sysfs code.  The sysfs interface that EDAC
- * presents to user space needs more thought, and is likely to change
- * substantially.
- */
-#define DISABLE_EDAC_SYSFS
 
 #ifdef CONFIG_EDAC_DEBUG
 /* Values of 0 to 4 will generate output */
@@ -64,31 +59,12 @@
 static int panic_on_pci_parity;		/* default no panic on PCI Parity */
 static atomic_t pci_parity_count = ATOMIC_INIT(0);
 
-/* Structure of the whitelist and blacklist arrays */
-struct edac_pci_device_list {
-	unsigned int  vendor;		/* Vendor ID */
-	unsigned int  device;		/* Deviice ID */
-};
-
-#define MAX_LISTED_PCI_DEVICES		32
-
-/* List of PCI devices (vendor-id:device-id) that should be skipped */
-static struct edac_pci_device_list pci_blacklist[MAX_LISTED_PCI_DEVICES];
-static int pci_blacklist_count;
-
-/* List of PCI devices (vendor-id:device-id) that should be scanned */
-static struct edac_pci_device_list pci_whitelist[MAX_LISTED_PCI_DEVICES];
-static int pci_whitelist_count ;
-
-#ifndef DISABLE_EDAC_SYSFS
 static struct kobject edac_pci_kobj; /* /sys/devices/system/edac/pci */
 static struct completion edac_pci_kobj_complete;
-#endif	/* DISABLE_EDAC_SYSFS */
 #endif	/* CONFIG_PCI */
 
 /*  START sysfs data and methods */
 
-#ifndef DISABLE_EDAC_SYSFS
 
 static const char *mem_types[] = {
 	[MEM_EMPTY] = "Empty",
@@ -147,18 +123,10 @@
  * /sys/devices/system/edac/mc;
  *	data structures and methods
  */
-#if 0
-static ssize_t memctrl_string_show(void *ptr, char *buffer)
-{
-	char *value = (char*) ptr;
-	return sprintf(buffer, "%s\n", value);
-}
-#endif
-
 static ssize_t memctrl_int_show(void *ptr, char *buffer)
 {
 	int *value = (int*) ptr;
-	return sprintf(buffer, "%d\n", *value);
+	return sprintf(buffer, "%u\n", *value);
 }
 
 static ssize_t memctrl_int_store(void *ptr, const char *buffer, size_t count)
@@ -224,11 +192,6 @@
 	.store  = _store,					\
 };
 
-/* cwrow<id> attribute f*/
-#if 0
-MEMCTRL_STRING_ATTR(mc_version,EDAC_MC_VERSION,S_IRUGO,memctrl_string_show,NULL);
-#endif
-
 /* csrow<id> control files */
 MEMCTRL_ATTR(panic_on_ue,S_IRUGO|S_IWUSR,memctrl_int_show,memctrl_int_store);
 MEMCTRL_ATTR(log_ue,S_IRUGO|S_IWUSR,memctrl_int_show,memctrl_int_store);
@@ -257,8 +220,6 @@
 	.default_attrs = (struct attribute **) memctrl_attr,
 };
 
-#endif  /* DISABLE_EDAC_SYSFS */
-
 /* Initialize the main sysfs entries for edac:
  *   /sys/devices/system/edac
  *
@@ -268,11 +229,6 @@
  *         !0 FAILURE
  */
 static int edac_sysfs_memctrl_setup(void)
-#ifdef DISABLE_EDAC_SYSFS
-{
-	return 0;
-}
-#else
 {
 	int err=0;
 
@@ -304,7 +260,6 @@
 
 	return err;
 }
-#endif  /* DISABLE_EDAC_SYSFS */
 
 /*
  * MC teardown:
@@ -312,7 +267,6 @@
  */
 static void edac_sysfs_memctrl_teardown(void)
 {
-#ifndef DISABLE_EDAC_SYSFS
 	debugf0("MC: " __FILE__ ": %s()\n", __func__);
 
 	/* Unregister the MC's kobject and wait for reference count to reach
@@ -324,144 +278,9 @@
 
 	/* Unregister the 'edac' object */
 	sysdev_class_unregister(&edac_class);
-#endif  /* DISABLE_EDAC_SYSFS */
 }
 
 #ifdef CONFIG_PCI
-
-#ifndef DISABLE_EDAC_SYSFS
-
-/*
- * /sys/devices/system/edac/pci;
- * 	data structures and methods
- */
-
-struct list_control {
-	struct edac_pci_device_list *list;
-	int *count;
-};
-
-#if 0
-/* Output the list as:  vendor_id:device:id<,vendor_id:device_id> */
-static ssize_t edac_pci_list_string_show(void *ptr, char *buffer)
-{
-	struct list_control *listctl;
-	struct edac_pci_device_list *list;
-	char *p = buffer;
-	int len=0;
-	int i;
-
-	listctl = ptr;
-	list = listctl->list;
-
-	for (i = 0; i < *(listctl->count); i++, list++ ) {
-		if (len > 0)
-			len += snprintf(p + len, (PAGE_SIZE-len), ",");
-
-		len += snprintf(p + len,
-				(PAGE_SIZE-len),
-				"%x:%x",
-				list->vendor,list->device);
-	}
-
-	len += snprintf(p + len,(PAGE_SIZE-len), "\n");
-	return (ssize_t) len;
-}
-
-/**
- *
- * Scan string from **s to **e looking for one 'vendor:device' tuple
- * where each field is a hex value
- *
- * return 0 if an entry is NOT found
- * return 1 if an entry is found
- *	fill in *vendor_id and *device_id with values found
- *
- * In both cases, make sure *s has been moved forward toward *e
- */
-static int parse_one_device(const char **s,const char **e,
-	unsigned int *vendor_id, unsigned int *device_id)
-{
-	const char *runner, *p;
-
-	/* if null byte, we are done */
-	if (!**s) {
-		(*s)++;  /* keep *s moving */
-		return 0;
-	}
-
-	/* skip over newlines & whitespace */
-	if ((**s == '\n') || isspace(**s)) {
-		(*s)++;
-		return 0;
-	}
-
-	if (!isxdigit(**s)) {
-		(*s)++;
-		return 0;
-	}
-
-	/* parse vendor_id */
-	runner = *s;
-
-	while (runner < *e) {
-		/* scan for vendor:device delimiter */
-		if (*runner == ':') {
-			*vendor_id = simple_strtol((char*) *s, (char**) &p, 16);
-			runner = p + 1;
-			break;
-		}
-
-		runner++;
-	}
-
-	if (!isxdigit(*runner)) {
-		*s = ++runner;
-		return 0;
-	}
-
-	/* parse device_id */
-	if (runner < *e) {
-		*device_id = simple_strtol((char*)runner, (char**)&p, 16);
-		runner = p;
-	}
-
-	*s = runner;
-	return 1;
-}
-
-static ssize_t edac_pci_list_string_store(void *ptr, const char *buffer,
-		size_t count)
-{
-	struct list_control *listctl;
-	struct edac_pci_device_list *list;
-	unsigned int vendor_id, device_id;
-	const char *s, *e;
-	int *index;
-
-	s = (char*)buffer;
-	e = s + count;
-	listctl = ptr;
-	list = listctl->list;
-	index = listctl->count;
-	*index = 0;
-
-	while (*index < MAX_LISTED_PCI_DEVICES) {
-		if (parse_one_device(&s,&e,&vendor_id,&device_id)) {
-			list[ *index ].vendor = vendor_id;
-			list[ *index ].device = device_id;
-			(*index)++;
-		}
-
-		/* check for all data consume */
-		if (s >= e)
-			break;
-	}
-
-	return count;
-}
-
-#endif
 static ssize_t edac_pci_int_show(void *ptr, char *buffer)
 {
 	int *value = ptr;
@@ -529,31 +348,6 @@
 	.store  = _store,					\
 };
 
-#if 0
-static struct list_control pci_whitelist_control = {
-	.list = pci_whitelist,
-	.count = &pci_whitelist_count
-};
-
-static struct list_control pci_blacklist_control = {
-	.list = pci_blacklist,
-	.count = &pci_blacklist_count
-};
-
-/* whitelist attribute */
-EDAC_PCI_STRING_ATTR(pci_parity_whitelist,
-	&pci_whitelist_control,
-	S_IRUGO|S_IWUSR,
-	edac_pci_list_string_show,
-	edac_pci_list_string_store);
-
-EDAC_PCI_STRING_ATTR(pci_parity_blacklist,
-	&pci_blacklist_control,
-	S_IRUGO|S_IWUSR,
-	edac_pci_list_string_show,
-	edac_pci_list_string_store);
-#endif
-
 /* PCI Parity control files */
 EDAC_PCI_ATTR(check_pci_parity, S_IRUGO|S_IWUSR, edac_pci_int_show,
 	edac_pci_int_store);
@@ -582,18 +376,11 @@
 	.default_attrs = (struct attribute **) edac_pci_attr,
 };
 
-#endif  /* DISABLE_EDAC_SYSFS */
-
 /**
  * edac_sysfs_pci_setup()
  *
  */
 static int edac_sysfs_pci_setup(void)
-#ifdef DISABLE_EDAC_SYSFS
-{
-	return 0;
-}
-#else
 {
 	int err;
 
@@ -617,16 +404,13 @@
 
 	return err;
 }
-#endif  /* DISABLE_EDAC_SYSFS */
 
 static void edac_sysfs_pci_teardown(void)
 {
-#ifndef DISABLE_EDAC_SYSFS
 	debugf0("%s()\n", __func__);
 	init_completion(&edac_pci_kobj_complete);
 	kobject_unregister(&edac_pci_kobj);
 	wait_for_completion(&edac_pci_kobj_complete);
-#endif
 }
 
 
@@ -756,36 +540,6 @@
 }
 
 /*
- * check_dev_on_list: Scan for a PCI device on a white/black list
- * @list:	an EDAC  &edac_pci_device_list  white/black list pointer
- * @free_index:	index of next free entry on the list
- * @pci_dev:	PCI Device pointer
- *
- * see if list contains the device.
- *
- * Returns:  	0 not found
- *		1 found on list
- */
-static int check_dev_on_list(struct edac_pci_device_list *list,
-		int free_index, struct pci_dev *dev)
-{
-	int i;
-	int rc = 0;     /* Assume not found */
-	unsigned short vendor=dev->vendor;
-	unsigned short device=dev->device;
-
-	/* Scan the list, looking for a vendor/device match */
-	for (i = 0; i < free_index; i++, list++ ) {
-		if ((list->vendor == vendor ) && (list->device == device )) {
-			rc = 1;
-			break;
-		}
-	}
-
-	return rc;
-}
-
-/*
  * pci_dev parity list iterator
  *	Scan the PCI device list for one iteration, looking for SERRORs
  *	Master Parity ERRORS or Parity ERRORs on primary or secondary devices
@@ -799,22 +553,7 @@
 	 * bumped until we are done with it
 	 */
 	while((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
-		/* if whitelist exists then it has priority, so only scan
-		 * those devices on the whitelist
-		 */
-		if (pci_whitelist_count > 0 ) {
-			if (check_dev_on_list(pci_whitelist,
-					pci_whitelist_count, dev))
-				fn(dev);
-		} else {
-			/*
-			 * if no whitelist, then check if this devices is
-			 * blacklisted
-			 */
-			if (!check_dev_on_list(pci_blacklist,
-					pci_blacklist_count, dev))
-				fn(dev);
-		}
+		fn(dev);
 	}
 }
 
@@ -855,154 +594,101 @@
 
 #else	/* CONFIG_PCI */
 
-static inline void do_pci_parity_check(void)
-{
-	/* no-op */
-}
+/* pre-process these away */
+#define	do_pci_parity_check()
+#define	clear_pci_parity_errors()
+#define	edac_sysfs_pci_teardown()
+#define	edac_sysfs_pci_setup()	(0)
 
-static inline void clear_pci_parity_errors(void)
-{
-	/* no-op */
-}
-
-static void edac_sysfs_pci_teardown(void)
-{
-}
-
-static int edac_sysfs_pci_setup(void)
-{
-	return 0;
-}
 #endif	/* CONFIG_PCI */
 
-#ifndef DISABLE_EDAC_SYSFS
-
-/* EDAC sysfs CSROW data structures and methods */
-
-/* Set of more detailed csrow<id> attribute show/store functions */
-static ssize_t csrow_ch0_dimm_label_show(struct csrow_info *csrow, char *data)
-{
-	ssize_t size = 0;
-
-	if (csrow->nr_channels > 0) {
-		size = snprintf(data, EDAC_MC_LABEL_LEN,"%s\n",
-			csrow->channels[0].label);
-	}
-
-	return size;
-}
+/* EDAC sysfs CSROW data structures and methods
+ */
 
-static ssize_t csrow_ch1_dimm_label_show(struct csrow_info *csrow, char *data)
+/* Set of more default csrow<id> attribute show/store functions */
+static ssize_t csrow_ue_count_show(struct csrow_info *csrow, char *data, int private)
 {
-	ssize_t size = 0;
-
-	if (csrow->nr_channels > 0) {
-		size = snprintf(data, EDAC_MC_LABEL_LEN, "%s\n",
-			csrow->channels[1].label);
-	}
-
-	return size;
+	return sprintf(data,"%u\n", csrow->ue_count);
 }
 
-static ssize_t csrow_ch0_dimm_label_store(struct csrow_info *csrow,
-		const char *data, size_t size)
+static ssize_t csrow_ce_count_show(struct csrow_info *csrow, char *data, int private)
 {
-	ssize_t max_size = 0;
-
-	if (csrow->nr_channels > 0) {
-		max_size = min((ssize_t)size,(ssize_t)EDAC_MC_LABEL_LEN-1);
-		strncpy(csrow->channels[0].label, data, max_size);
-		csrow->channels[0].label[max_size] = '\0';
-	}
-
-	return size;
+	return sprintf(data,"%u\n", csrow->ce_count);
 }
 
-static ssize_t csrow_ch1_dimm_label_store(struct csrow_info *csrow,
-		const char *data, size_t size)
+static ssize_t csrow_size_show(struct csrow_info *csrow, char *data, int private)
 {
-	ssize_t max_size = 0;
-
-	if (csrow->nr_channels > 1) {
-		max_size = min((ssize_t)size,(ssize_t)EDAC_MC_LABEL_LEN-1);
-		strncpy(csrow->channels[1].label, data, max_size);
-		csrow->channels[1].label[max_size] = '\0';
-	}
-
-	return max_size;
+	return sprintf(data,"%u\n", PAGES_TO_MiB(csrow->nr_pages));
 }
 
-static ssize_t csrow_ue_count_show(struct csrow_info *csrow, char *data)
+static ssize_t csrow_mem_type_show(struct csrow_info *csrow, char *data, int private)
 {
-	return sprintf(data,"%u\n", csrow->ue_count);
+	return sprintf(data,"%s\n", mem_types[csrow->mtype]);
 }
 
-static ssize_t csrow_ce_count_show(struct csrow_info *csrow, char *data)
+static ssize_t csrow_dev_type_show(struct csrow_info *csrow, char *data, int private)
 {
-	return sprintf(data,"%u\n", csrow->ce_count);
+	return sprintf(data,"%s\n", dev_types[csrow->dtype]);
 }
 
-static ssize_t csrow_ch0_ce_count_show(struct csrow_info *csrow, char *data)
+static ssize_t csrow_edac_mode_show(struct csrow_info *csrow, char *data, int private)
 {
-	ssize_t size = 0;
-
-	if (csrow->nr_channels > 0) {
-		size = sprintf(data,"%u\n", csrow->channels[0].ce_count);
-	}
-
-	return size;
+	return sprintf(data,"%s\n", edac_caps[csrow->edac_mode]);
 }
 
-static ssize_t csrow_ch1_ce_count_show(struct csrow_info *csrow, char *data)
-{
-	ssize_t size = 0;
-
-	if (csrow->nr_channels > 1) {
-		size = sprintf(data,"%u\n", csrow->channels[1].ce_count);
-	}
-
-	return size;
+/* show/store functions for DIMM Label attributes */
+static ssize_t channel_dimm_label_show(struct csrow_info *csrow,
+		char *data, int channel)
+{
+	return snprintf(data, EDAC_MC_LABEL_LEN,"%s",
+			csrow->channels[channel].label);
 }
 
-static ssize_t csrow_size_show(struct csrow_info *csrow, char *data)
+static ssize_t channel_dimm_label_store(struct csrow_info *csrow,
+				const char *data,
+				size_t count,
+				int channel)
 {
-	return sprintf(data,"%u\n", PAGES_TO_MiB(csrow->nr_pages));
-}
+	ssize_t max_size = 0;
 
-static ssize_t csrow_mem_type_show(struct csrow_info *csrow, char *data)
-{
-	return sprintf(data,"%s\n", mem_types[csrow->mtype]);
-}
+	max_size = min((ssize_t)count,(ssize_t)EDAC_MC_LABEL_LEN-1);
+	strncpy(csrow->channels[channel].label, data, max_size);
+	csrow->channels[channel].label[max_size] = '\0';
 
-static ssize_t csrow_dev_type_show(struct csrow_info *csrow, char *data)
-{
-	return sprintf(data,"%s\n", dev_types[csrow->dtype]);
+	return max_size;
 }
 
-static ssize_t csrow_edac_mode_show(struct csrow_info *csrow, char *data)
+/* show function for dynamic chX_ce_count attribute */
+static ssize_t channel_ce_count_show(struct csrow_info *csrow,
+				char *data,
+				int channel)
 {
-	return sprintf(data,"%s\n", edac_caps[csrow->edac_mode]);
+	return sprintf(data, "%u\n", csrow->channels[channel].ce_count);
 }
 
+/* csrow specific attribute structure */
 struct csrowdev_attribute {
 	struct attribute attr;
-	ssize_t (*show)(struct csrow_info *,char *);
-	ssize_t (*store)(struct csrow_info *, const char *,size_t);
+	ssize_t (*show)(struct csrow_info *,char *,int);
+	ssize_t (*store)(struct csrow_info *, const char *,size_t,int);
+	int    private;
 };
 
 #define to_csrow(k) container_of(k, struct csrow_info, kobj)
 #define to_csrowdev_attr(a) container_of(a, struct csrowdev_attribute, attr)
 
-/* Set of show/store higher level functions for csrow objects */
-static ssize_t csrowdev_show(struct kobject *kobj, struct attribute *attr,
-		char *buffer)
+/* Set of show/store higher level functions for default csrow attributes */
+static ssize_t csrowdev_show(struct kobject *kobj,
+			struct attribute *attr,
+			char *buffer)
 {
 	struct csrow_info *csrow = to_csrow(kobj);
 	struct csrowdev_attribute *csrowdev_attr = to_csrowdev_attr(attr);
 
 	if (csrowdev_attr->show)
-		return csrowdev_attr->show(csrow, buffer);
-
+		return csrowdev_attr->show(csrow,
+					buffer,
+					csrowdev_attr->private);
 	return -EIO;
 }
 
@@ -1013,8 +699,10 @@
 	struct csrowdev_attribute * csrowdev_attr = to_csrowdev_attr(attr);
 
 	if (csrowdev_attr->store)
-		return csrowdev_attr->store(csrow, buffer, count);
-
+		return csrowdev_attr->store(csrow,
+					buffer,
+					count,
+					csrowdev_attr->private);
 	return -EIO;
 }
 
@@ -1023,69 +711,157 @@
 	.store  = csrowdev_store
 };
 
-#define CSROWDEV_ATTR(_name,_mode,_show,_store)			\
+#define CSROWDEV_ATTR(_name,_mode,_show,_store,_private)	\
 struct csrowdev_attribute attr_##_name = {			\
 	.attr = {.name = __stringify(_name), .mode = _mode },	\
 	.show   = _show,					\
 	.store  = _store,					\
+	.private = _private,					\
 };
 
-/* cwrow<id>/attribute files */
-CSROWDEV_ATTR(size_mb,S_IRUGO,csrow_size_show,NULL);
-CSROWDEV_ATTR(dev_type,S_IRUGO,csrow_dev_type_show,NULL);
-CSROWDEV_ATTR(mem_type,S_IRUGO,csrow_mem_type_show,NULL);
-CSROWDEV_ATTR(edac_mode,S_IRUGO,csrow_edac_mode_show,NULL);
-CSROWDEV_ATTR(ue_count,S_IRUGO,csrow_ue_count_show,NULL);
-CSROWDEV_ATTR(ce_count,S_IRUGO,csrow_ce_count_show,NULL);
-CSROWDEV_ATTR(ch0_ce_count,S_IRUGO,csrow_ch0_ce_count_show,NULL);
-CSROWDEV_ATTR(ch1_ce_count,S_IRUGO,csrow_ch1_ce_count_show,NULL);
+/* default cwrow<id>/attribute files */
+CSROWDEV_ATTR(size_mb,S_IRUGO,csrow_size_show,NULL,0);
+CSROWDEV_ATTR(dev_type,S_IRUGO,csrow_dev_type_show,NULL,0);
+CSROWDEV_ATTR(mem_type,S_IRUGO,csrow_mem_type_show,NULL,0);
+CSROWDEV_ATTR(edac_mode,S_IRUGO,csrow_edac_mode_show,NULL,0);
+CSROWDEV_ATTR(ue_count,S_IRUGO,csrow_ue_count_show,NULL,0);
+CSROWDEV_ATTR(ce_count,S_IRUGO,csrow_ce_count_show,NULL,0);
 
-/* control/attribute files */
-CSROWDEV_ATTR(ch0_dimm_label,S_IRUGO|S_IWUSR,
-		csrow_ch0_dimm_label_show,
-		csrow_ch0_dimm_label_store);
-CSROWDEV_ATTR(ch1_dimm_label,S_IRUGO|S_IWUSR,
-		csrow_ch1_dimm_label_show,
-		csrow_ch1_dimm_label_store);
-
-/* Attributes of the CSROW<id> object */
-static struct csrowdev_attribute *csrow_attr[] = {
+/* default attributes of the CSROW<id> object */
+static struct csrowdev_attribute *default_csrow_attr[] = {
 	&attr_dev_type,
 	&attr_mem_type,
 	&attr_edac_mode,
 	&attr_size_mb,
 	&attr_ue_count,
 	&attr_ce_count,
-	&attr_ch0_ce_count,
-	&attr_ch1_ce_count,
-	&attr_ch0_dimm_label,
-	&attr_ch1_dimm_label,
 	NULL,
 };
 
-/* No memory to release */
+
+/* possible dynamic channel DIMM Label attribute files */
+CSROWDEV_ATTR(ch0_dimm_label,S_IRUGO|S_IWUSR,
+		channel_dimm_label_show,
+		channel_dimm_label_store,
+		0 );
+CSROWDEV_ATTR(ch1_dimm_label,S_IRUGO|S_IWUSR,
+		channel_dimm_label_show,
+		channel_dimm_label_store,
+		1 );
+CSROWDEV_ATTR(ch2_dimm_label,S_IRUGO|S_IWUSR,
+		channel_dimm_label_show,
+		channel_dimm_label_store,
+		2 );
+CSROWDEV_ATTR(ch3_dimm_label,S_IRUGO|S_IWUSR,
+		channel_dimm_label_show,
+		channel_dimm_label_store,
+		3 );
+CSROWDEV_ATTR(ch4_dimm_label,S_IRUGO|S_IWUSR,
+		channel_dimm_label_show,
+		channel_dimm_label_store,
+		4 );
+CSROWDEV_ATTR(ch5_dimm_label,S_IRUGO|S_IWUSR,
+		channel_dimm_label_show,
+		channel_dimm_label_store,
+		5 );
+
+/* Total possible dynamic DIMM Label attribute file table */
+static struct csrowdev_attribute *dynamic_csrow_dimm_attr[] = {
+		&attr_ch0_dimm_label,
+		&attr_ch1_dimm_label,
+		&attr_ch2_dimm_label,
+		&attr_ch3_dimm_label,
+		&attr_ch4_dimm_label,
+		&attr_ch5_dimm_label
+};
+
+/* possible dynamic channel ce_count attribute files */
+CSROWDEV_ATTR(ch0_ce_count,S_IRUGO|S_IWUSR,
+		channel_ce_count_show,
+		NULL,
+		0 );
+CSROWDEV_ATTR(ch1_ce_count,S_IRUGO|S_IWUSR,
+		channel_ce_count_show,
+		NULL,
+		1 );
+CSROWDEV_ATTR(ch2_ce_count,S_IRUGO|S_IWUSR,
+		channel_ce_count_show,
+		NULL,
+		2 );
+CSROWDEV_ATTR(ch3_ce_count,S_IRUGO|S_IWUSR,
+		channel_ce_count_show,
+		NULL,
+		3 );
+CSROWDEV_ATTR(ch4_ce_count,S_IRUGO|S_IWUSR,
+		channel_ce_count_show,
+		NULL,
+		4 );
+CSROWDEV_ATTR(ch5_ce_count,S_IRUGO|S_IWUSR,
+		channel_ce_count_show,
+		NULL,
+		5 );
+
+/* Total possible dynamic ce_count attribute file table */
+static struct csrowdev_attribute *dynamic_csrow_ce_count_attr[] = {
+		&attr_ch0_ce_count,
+		&attr_ch1_ce_count,
+		&attr_ch2_ce_count,
+		&attr_ch3_ce_count,
+		&attr_ch4_ce_count,
+		&attr_ch5_ce_count
+};
+
+
+#define EDAC_NR_CHANNELS	6
+
+/* Create dynamic CHANNEL files, indexed by 'chan',  under specifed CSROW */
+static int edac_create_channel_files(struct kobject *kobj, int chan)
+{
+	int err=-ENODEV;
+
+	if (chan >= EDAC_NR_CHANNELS)
+		return err;
+
+	/* create the DIMM label attribute file */
+	err = sysfs_create_file(kobj,
+			(struct attribute *) dynamic_csrow_dimm_attr[chan]);
+
+	if (!err) {
+		/* create the CE Count attribute file */
+		err = sysfs_create_file(kobj,
+			(struct attribute *) dynamic_csrow_ce_count_attr[chan]);
+	} else {
+		debugf1("%s()  dimm labels and ce_count files created", __func__);
+	}
+
+	return err;
+}
+
+/* No memory to release for this kobj */
 static void edac_csrow_instance_release(struct kobject *kobj)
 {
 	struct csrow_info *cs;
 
-	debugf1("%s()\n", __func__);
 	cs = container_of(kobj, struct csrow_info, kobj);
 	complete(&cs->kobj_complete);
 }
 
+/* the kobj_type instance for a CSROW */
 static struct kobj_type ktype_csrow = {
 	.release = edac_csrow_instance_release,
 	.sysfs_ops = &csrowfs_ops,
-	.default_attrs = (struct attribute **) csrow_attr,
+	.default_attrs = (struct attribute **) default_csrow_attr,
 };
 
 /* Create a CSROW object under specifed edac_mc_device */
-static int edac_create_csrow_object(struct kobject *edac_mci_kobj,
-		struct csrow_info *csrow, int index)
+static int edac_create_csrow_object(
+		struct kobject *edac_mci_kobj,
+		struct csrow_info *csrow,
+		int index)
 {
 	int err = 0;
+	int chan;
 
-	debugf0("%s()\n", __func__);
 	memset(&csrow->kobj, 0, sizeof(csrow->kobj));
 
 	/* generate ..../edac/mc/mc<id>/csrow<index>   */
@@ -1095,21 +871,27 @@
 
 	/* name this instance of csrow<id> */
 	err = kobject_set_name(&csrow->kobj,"csrow%d",index);
+	if (err)
+		goto error_exit;
 
+	/* Instanstiate the csrow object */
+	err = kobject_register(&csrow->kobj);
 	if (!err) {
-		/* Instanstiate the csrow object */
-		err = kobject_register(&csrow->kobj);
-
-		if (err)
-			debugf0("Failed to register CSROW%d\n",index);
-		else
-			debugf0("Registered CSROW%d\n",index);
+		/* Create the dyanmic attribute files on this csrow,
+		 * namely, the DIMM labels and the channel ce_count
+		 */
+		for (chan = 0; chan < csrow->nr_channels; chan++) {
+			err = edac_create_channel_files(&csrow->kobj,chan);
+			if (err)
+				break;
+		}
 	}
 
+error_exit:
 	return err;
 }
 
-/* sysfs data structures and methods for the MCI kobjects */
+/* default sysfs methods and data structures for the main MCI kobject */
 
 static ssize_t mci_reset_counters_store(struct mem_ctl_info *mci,
 		const char *data, size_t count)
@@ -1135,6 +917,7 @@
 	return count;
 }
 
+/* default attribute files for the MCI object */
 static ssize_t mci_ue_count_show(struct mem_ctl_info *mci, char *data)
 {
 	return sprintf(data,"%d\n", mci->ue_count);
@@ -1160,71 +943,11 @@
 	return sprintf(data,"%ld\n", (jiffies - mci->start_time) / HZ);
 }
 
-static ssize_t mci_mod_name_show(struct mem_ctl_info *mci, char *data)
-{
-	return sprintf(data,"%s %s\n", mci->mod_name, mci->mod_ver);
-}
-
 static ssize_t mci_ctl_name_show(struct mem_ctl_info *mci, char *data)
 {
 	return sprintf(data,"%s\n", mci->ctl_name);
 }
 
-static int mci_output_edac_cap(char *buf, unsigned long edac_cap)
-{
-	char *p = buf;
-	int bit_idx;
-
-	for (bit_idx = 0; bit_idx < 8 * sizeof(edac_cap); bit_idx++) {
-		if ((edac_cap >> bit_idx) & 0x1)
-			p += sprintf(p, "%s ", edac_caps[bit_idx]);
-	}
-
-	return p - buf;
-}
-
-static ssize_t mci_edac_capability_show(struct mem_ctl_info *mci, char *data)
-{
-	char *p = data;
-
-	p += mci_output_edac_cap(p,mci->edac_ctl_cap);
-	p += sprintf(p, "\n");
-	return p - data;
-}
-
-static ssize_t mci_edac_current_capability_show(struct mem_ctl_info *mci,
-		char *data)
-{
-	char *p = data;
-
-	p += mci_output_edac_cap(p,mci->edac_cap);
-	p += sprintf(p, "\n");
-	return p - data;
-}
-
-static int mci_output_mtype_cap(char *buf, unsigned long mtype_cap)
-{
-	char *p = buf;
-	int bit_idx;
-
-	for (bit_idx = 0; bit_idx < 8 * sizeof(mtype_cap); bit_idx++) {
-		if ((mtype_cap >> bit_idx) & 0x1)
-			p += sprintf(p, "%s ", mem_types[bit_idx]);
-	}
-
-	return p - buf;
-}
-
-static ssize_t mci_supported_mem_type_show(struct mem_ctl_info *mci,
-		char *data)
-{
-	char *p = data;
-
-	p += mci_output_mtype_cap(p,mci->mtype_cap);
-	p += sprintf(p, "\n");
-	return p - data;
-}
-
 static ssize_t mci_size_mb_show(struct mem_ctl_info *mci, char *data)
 {
 	int total_pages, csrow_idx;
@@ -1251,6 +974,7 @@
 #define to_mci(k) container_of(k, struct mem_ctl_info, edac_mci_kobj)
 #define to_mcidev_attr(a) container_of(a, struct mcidev_attribute, attr)
 
+/* MCI show/store functions for top most object */
 static ssize_t mcidev_show(struct kobject *kobj, struct attribute *attr,
 		char *buffer)
 {
@@ -1287,31 +1011,21 @@
 	.store  = _store,					\
 };
 
-/* Control file */
+/* default Control file */
 MCIDEV_ATTR(reset_counters,S_IWUSR,NULL,mci_reset_counters_store);
 
-/* Attribute files */
+/* default Attribute files */
 MCIDEV_ATTR(mc_name,S_IRUGO,mci_ctl_name_show,NULL);
-MCIDEV_ATTR(module_name,S_IRUGO,mci_mod_name_show,NULL);
-MCIDEV_ATTR(edac_capability,S_IRUGO,mci_edac_capability_show,NULL);
 MCIDEV_ATTR(size_mb,S_IRUGO,mci_size_mb_show,NULL);
 MCIDEV_ATTR(seconds_since_reset,S_IRUGO,mci_seconds_show,NULL);
 MCIDEV_ATTR(ue_noinfo_count,S_IRUGO,mci_ue_noinfo_show,NULL);
 MCIDEV_ATTR(ce_noinfo_count,S_IRUGO,mci_ce_noinfo_show,NULL);
 MCIDEV_ATTR(ue_count,S_IRUGO,mci_ue_count_show,NULL);
 MCIDEV_ATTR(ce_count,S_IRUGO,mci_ce_count_show,NULL);
-MCIDEV_ATTR(edac_current_capability,S_IRUGO,
-	mci_edac_current_capability_show,NULL);
-MCIDEV_ATTR(supported_mem_type,S_IRUGO,
-	mci_supported_mem_type_show,NULL);
 
 static struct mcidev_attribute *mci_attr[] = {
 	&mci_attr_reset_counters,
-	&mci_attr_module_name,
 	&mci_attr_mc_name,
-	&mci_attr_edac_capability,
-	&mci_attr_edac_current_capability,
-	&mci_attr_supported_mem_type,
 	&mci_attr_size_mb,
 	&mci_attr_seconds_since_reset,
 	&mci_attr_ue_noinfo_count,
@@ -1339,7 +1053,6 @@
 	.default_attrs = (struct attribute **) mci_attr,
 };
 
-#endif  /* DISABLE_EDAC_SYSFS */
 
 #define EDAC_DEVICE_SYMLINK	"device"
 
@@ -1352,11 +1065,6 @@
  *	!0	Failure
  */
 static int edac_create_sysfs_mci_device(struct mem_ctl_info *mci)
-#ifdef DISABLE_EDAC_SYSFS
-{
-	return 0;
-}
-#else
 {
 	int i;
 	int err;
@@ -1368,7 +1076,6 @@
 
 	/* set the name of the mc<id> object */
 	err = kobject_set_name(edac_mci_kobj,"mc%d",mci->mc_idx);
-
 	if (err)
 		return err;
 
@@ -1378,14 +1085,12 @@
 
 	/* register the mc<id> kobject */
 	err = kobject_register(edac_mci_kobj);
-
 	if (err)
 		return err;
 
 	/* create a symlink for the device */
 	err = sysfs_create_link(edac_mci_kobj, &mci->dev->kobj,
 				EDAC_DEVICE_SYMLINK);
-
 	if (err)
 		goto fail0;
 
@@ -1398,7 +1103,6 @@
 		/* Only expose populated CSROWs */
 		if (csrow->nr_pages > 0) {
 			err = edac_create_csrow_object(edac_mci_kobj,csrow,i);
-
 			if (err)
 				goto fail1;
 		}
@@ -1422,14 +1126,12 @@
 	wait_for_completion(&mci->kobj_complete);
 	return err;
 }
-#endif  /* DISABLE_EDAC_SYSFS */
 
 /*
  * remove a Memory Controller instance
  */
 static void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci)
 {
-#ifndef DISABLE_EDAC_SYSFS
 	int i;
 
 	debugf0("%s()\n", __func__);
@@ -1447,7 +1149,6 @@
 	init_completion(&mci->kobj_complete);
 	kobject_unregister(&mci->edac_mci_kobj);
 	wait_for_completion(&mci->kobj_complete);
-#endif  /* DISABLE_EDAC_SYSFS */
 }
 
 /* END OF sysfs data and methods */
diff -urN linux-2.6.18-rc1/drivers/hwmon/abituguru.c linux-2.6.18-rc2/drivers/hwmon/abituguru.c
--- linux-2.6.18-rc1/drivers/hwmon/abituguru.c	2006-07-15 22:34:42.156951851 +0000
+++ linux-2.6.18-rc2/drivers/hwmon/abituguru.c	2006-07-15 22:34:47.405521574 +0000
@@ -142,6 +142,14 @@
 static int force;
 module_param(force, bool, 0);
 MODULE_PARM_DESC(force, "Set to one to force detection.");
+static int bank1_types[ABIT_UGURU_MAX_BANK1_SENSORS] = { -1, -1, -1, -1, -1,
+	-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 };
+module_param_array(bank1_types, int, NULL, 0);
+MODULE_PARM_DESC(bank1_types, "Bank1 sensortype autodetection override:\n"
+	"   -1 autodetect\n"
+	"    0 volt sensor\n"
+	"    1 temp sensor\n"
+	"    2 not connected");
 static int fan_sensors;
 module_param(fan_sensors, int, 0);
 MODULE_PARM_DESC(fan_sensors, "Number of fan sensors on the uGuru "
@@ -397,6 +405,15 @@
 	u8 val, buf[3];
 	int ret = ABIT_UGURU_NC;
 
+	/* If overriden by the user return the user selected type */
+	if (bank1_types[sensor_addr] >= ABIT_UGURU_IN_SENSOR &&
+			bank1_types[sensor_addr] <= ABIT_UGURU_NC) {
+		ABIT_UGURU_DEBUG(2, "assuming sensor type %d for bank1 sensor "
+			"%d because of \"bank1_types\" module param\n",
+			bank1_types[sensor_addr], (int)sensor_addr);
+		return bank1_types[sensor_addr];
+	}
+
 	/* First read the sensor and the current settings */
 	if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK1, sensor_addr, &val,
 			1, ABIT_UGURU_MAX_RETRIES) != 1)
@@ -514,7 +531,7 @@
 {
 	int i;
 
-	if (fan_sensors) {
+	if (fan_sensors > 0 && fan_sensors <= ABIT_UGURU_MAX_BANK2_SENSORS) {
 		data->bank2_sensors = fan_sensors;
 		ABIT_UGURU_DEBUG(2, "assuming %d fan sensors because of "
 			"\"fan_sensors\" module param\n",
@@ -568,7 +585,7 @@
 {
 	int i, j;
 
-	if (pwms) {
+	if (pwms > 0 && pwms <= ABIT_UGURU_MAX_PWMS) {
 		data->pwms = pwms;
 		ABIT_UGURU_DEBUG(2, "assuming %d PWM outputs because of "
 			"\"pwms\" module param\n", (int)data->pwms);
diff -urN linux-2.6.18-rc1/drivers/i2c/algos/i2c-algo-bit.c linux-2.6.18-rc2/drivers/i2c/algos/i2c-algo-bit.c
--- linux-2.6.18-rc1/drivers/i2c/algos/i2c-algo-bit.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/i2c/algos/i2c-algo-bit.c	2006-07-15 22:34:47.413522443 +0000
@@ -372,7 +372,6 @@
 
 	while (count > 0) {
 		inval = i2c_inb(i2c_adap);
-/*printk("%#02x ",inval); if ( ! (count % 16) ) printk("\n"); */
 		if (inval>=0) {
 			*temp = inval;
 			rdcount++;
@@ -544,8 +543,7 @@
 	adap->timeout = 100;	/* default values, should	*/
 	adap->retries = 3;	/* be replaced by defines	*/
 
-	i2c_add_adapter(adap);
-	return 0;
+	return i2c_add_adapter(adap);
 }
 
 
diff -urN linux-2.6.18-rc1/drivers/i2c/algos/i2c-algo-ite.c linux-2.6.18-rc2/drivers/i2c/algos/i2c-algo-ite.c
--- linux-2.6.18-rc1/drivers/i2c/algos/i2c-algo-ite.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/i2c/algos/i2c-algo-ite.c	2006-07-15 22:34:47.413522443 +0000
@@ -742,10 +742,8 @@
 	adap->retries = 3;		/* be replaced by defines	*/
 	adap->flags = 0;
 
-	i2c_add_adapter(adap);
 	iic_init(iic_adap);
-
-	return 0;
+	return i2c_add_adapter(adap);
 }
 
 
diff -urN linux-2.6.18-rc1/drivers/i2c/algos/i2c-algo-pca.c linux-2.6.18-rc2/drivers/i2c/algos/i2c-algo-pca.c
--- linux-2.6.18-rc1/drivers/i2c/algos/i2c-algo-pca.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/i2c/algos/i2c-algo-pca.c	2006-07-15 22:34:47.413522443 +0000
@@ -374,10 +374,10 @@
 	adap->timeout = 100;		/* default values, should	*/
 	adap->retries = 3;		/* be replaced by defines	*/
 
-	rval = pca_init(pca_adap);
+	if ((rval = pca_init(pca_adap)))
+		return rval;
 
-	if (!rval)
-		i2c_add_adapter(adap);
+	rval = i2c_add_adapter(adap);
 
 	return rval;
 }
diff -urN linux-2.6.18-rc1/drivers/i2c/algos/i2c-algo-pcf.c linux-2.6.18-rc2/drivers/i2c/algos/i2c-algo-pcf.c
--- linux-2.6.18-rc1/drivers/i2c/algos/i2c-algo-pcf.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/i2c/algos/i2c-algo-pcf.c	2006-07-15 22:34:47.413522443 +0000
@@ -479,9 +479,11 @@
 	adap->timeout = 100;		/* default values, should	*/
 	adap->retries = 3;		/* be replaced by defines	*/
 
-	rval = pcf_init_8584(pcf_adap);
-	if (!rval)
-		i2c_add_adapter(adap);
+	if ((rval = pcf_init_8584(pcf_adap)))
+		return rval;
+
+	rval = i2c_add_adapter(adap);
+
 	return rval;
 }
 
diff -urN linux-2.6.18-rc1/drivers/i2c/algos/i2c-algo-sibyte.c linux-2.6.18-rc2/drivers/i2c/algos/i2c-algo-sibyte.c
--- linux-2.6.18-rc1/drivers/i2c/algos/i2c-algo-sibyte.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/i2c/algos/i2c-algo-sibyte.c	2006-07-15 22:34:47.413522443 +0000
@@ -173,9 +173,7 @@
 		printk("\n");
 	}
 
-	i2c_add_adapter(i2c_adap);
-
-	return 0;
+	return i2c_add_adapter(i2c_adap);
 }
 
 
diff -urN linux-2.6.18-rc1/drivers/i2c/busses/i2c-iop3xx.c linux-2.6.18-rc2/drivers/i2c/busses/i2c-iop3xx.c
--- linux-2.6.18-rc1/drivers/i2c/busses/i2c-iop3xx.c	2006-07-15 22:34:42.164952720 +0000
+++ linux-2.6.18-rc2/drivers/i2c/busses/i2c-iop3xx.c	2006-07-15 22:34:47.413522443 +0000
@@ -21,6 +21,9 @@
  * - Make it work with IXP46x chips
  * - Cleanup function names, coding style, etc
  *
+ * - writing to slave address causes latchup on iop331.
+ *	fix: driver refuses to address self.
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, version 2.
@@ -73,12 +76,6 @@
 } 
 
 static void 
-iop3xx_i2c_set_slave_addr(struct i2c_algo_iop3xx_data *iop3xx_adap)
-{
-	__raw_writel(MYSAR, iop3xx_adap->ioaddr + SAR_OFFSET);
-}
-
-static void 
 iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap)
 {
 	u32 cr = IOP3XX_ICR_GCD | IOP3XX_ICR_SCLEN | IOP3XX_ICR_UE;
@@ -248,6 +245,13 @@
 	int status;
 	int rc;
 
+	/* avoid writing to my slave address (hangs on 80331),
+	 * forbidden in Intel developer manual
+	 */
+	if (msg->addr == MYSAR) {
+		return -EBUSY;
+	}
+
 	__raw_writel(iic_cook_addr(msg), iop3xx_adap->ioaddr + DBR_OFFSET);
 	
 	cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK);
@@ -498,7 +502,6 @@
 	spin_lock_init(&adapter_data->lock);
 
 	iop3xx_i2c_reset(adapter_data);
-	iop3xx_i2c_set_slave_addr(adapter_data);
 	iop3xx_i2c_enable(adapter_data);
 
 	platform_set_drvdata(pdev, new_adapter);
diff -urN linux-2.6.18-rc1/drivers/i2c/busses/i2c-iop3xx.h linux-2.6.18-rc2/drivers/i2c/busses/i2c-iop3xx.h
--- linux-2.6.18-rc1/drivers/i2c/busses/i2c-iop3xx.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/i2c/busses/i2c-iop3xx.h	2006-07-15 22:34:47.413522443 +0000
@@ -80,7 +80,7 @@
 #define IOP3XX_GPOD_I2C0	0x00c0	/* clear these bits to enable ch0 */
 #define IOP3XX_GPOD_I2C1	0x0030	/* clear these bits to enable ch1 */
 
-#define MYSAR			0x02	/* SWAG a suitable slave address */
+#define MYSAR			0	/* default slave address */
 
 #define I2C_ERR			321
 #define I2C_ERR_BERR		(I2C_ERR+0)
diff -urN linux-2.6.18-rc1/drivers/i2c/busses/i2c-powermac.c linux-2.6.18-rc2/drivers/i2c/busses/i2c-powermac.c
--- linux-2.6.18-rc1/drivers/i2c/busses/i2c-powermac.c	2006-07-15 22:34:42.168953154 +0000
+++ linux-2.6.18-rc2/drivers/i2c/busses/i2c-powermac.c	2006-07-15 22:34:47.417522877 +0000
@@ -148,8 +148,6 @@
 	int			read;
 	int			addrdir;
 
-	if (num != 1)
-		return -EINVAL;
 	if (msgs->flags & I2C_M_TEN)
 		return -EINVAL;
 	read = (msgs->flags & I2C_M_RD) != 0;
@@ -166,7 +164,7 @@
 	rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
  bail:
 	pmac_i2c_close(bus);
-	return rc < 0 ? rc : msgs->len;
+	return rc < 0 ? rc : 1;
 }
 
 static u32 i2c_powermac_func(struct i2c_adapter * adapter)
diff -urN linux-2.6.18-rc1/drivers/i2c/busses/scx200_acb.c linux-2.6.18-rc2/drivers/i2c/busses/scx200_acb.c
--- linux-2.6.18-rc1/drivers/i2c/busses/scx200_acb.c	2006-07-15 22:34:42.168953154 +0000
+++ linux-2.6.18-rc2/drivers/i2c/busses/scx200_acb.c	2006-07-15 22:34:47.417522877 +0000
@@ -184,21 +184,21 @@
 		break;
 
 	case state_read:
-		/* Set ACK if receiving the last byte */
-		if (iface->len == 1)
+		/* Set ACK if _next_ byte will be the last one */
+		if (iface->len == 2)
 			outb(inb(ACBCTL1) | ACBCTL1_ACK, ACBCTL1);
 		else
 			outb(inb(ACBCTL1) & ~ACBCTL1_ACK, ACBCTL1);
 
-		*iface->ptr++ = inb(ACBSDA);
-		--iface->len;
-
-		if (iface->len == 0) {
+		if (iface->len == 1) {
 			iface->result = 0;
 			iface->state = state_idle;
 			outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1);
 		}
 
+		*iface->ptr++ = inb(ACBSDA);
+		--iface->len;
+
 		break;
 
 	case state_write:
@@ -307,8 +307,12 @@
 		buffer = (u8 *)&cur_word;
 		break;
 
-	case I2C_SMBUS_BLOCK_DATA:
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		if (rw == I2C_SMBUS_READ)
+			data->block[0] = I2C_SMBUS_BLOCK_MAX; /* For now */
 		len = data->block[0];
+		if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
+			return -EINVAL;
 		buffer = &data->block[1];
 		break;
 
@@ -372,7 +376,7 @@
 {
 	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
 	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
-	       I2C_FUNC_SMBUS_BLOCK_DATA;
+	       I2C_FUNC_SMBUS_I2C_BLOCK;
 }
 
 /* For now, we only handle combined mode (smbus) */
diff -urN linux-2.6.18-rc1/drivers/i2c/chips/pca9539.c linux-2.6.18-rc2/drivers/i2c/chips/pca9539.c
--- linux-2.6.18-rc1/drivers/i2c/chips/pca9539.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/i2c/chips/pca9539.c	2006-07-15 22:34:47.421523311 +0000
@@ -134,11 +134,13 @@
 	new_client->driver = &pca9539_driver;
 	new_client->flags = 0;
 
-	/* Detection: the pca9539 only has 8 registers (0-7).
-	   A read of 7 should succeed, but a read of 8 should fail. */
-	if ((i2c_smbus_read_byte_data(new_client, 7) < 0) ||
-	    (i2c_smbus_read_byte_data(new_client, 8) >= 0))
-		goto exit_kfree;
+	if (kind < 0) {
+		/* Detection: the pca9539 only has 8 registers (0-7).
+		   A read of 7 should succeed, but a read of 8 should fail. */
+		if ((i2c_smbus_read_byte_data(new_client, 7) < 0) ||
+		    (i2c_smbus_read_byte_data(new_client, 8) >= 0))
+			goto exit_kfree;
+	}
 
 	strlcpy(new_client->name, "pca9539", I2C_NAME_SIZE);
 
diff -urN linux-2.6.18-rc1/drivers/i2c/i2c-core.c linux-2.6.18-rc2/drivers/i2c/i2c-core.c
--- linux-2.6.18-rc1/drivers/i2c/i2c-core.c	2006-07-15 22:34:42.172953588 +0000
+++ linux-2.6.18-rc2/drivers/i2c/i2c-core.c	2006-07-15 22:34:47.421523311 +0000
@@ -756,9 +756,9 @@
 					"parameter for adapter %d, "
 					"addr 0x%02x\n", adap_id,
 					address_data->ignore[j + 1]);
+				ignore = 1;
+				break;
 			}
-			ignore = 1;
-			break;
 		}
 		if (ignore)
 			continue;
diff -urN linux-2.6.18-rc1/drivers/ide/legacy/ide-cs.c linux-2.6.18-rc2/drivers/ide/legacy/ide-cs.c
--- linux-2.6.18-rc1/drivers/ide/legacy/ide-cs.c	2006-07-15 22:34:42.180954457 +0000
+++ linux-2.6.18-rc2/drivers/ide/legacy/ide-cs.c	2006-06-18 01:49:35.000000000 +0000
@@ -146,16 +146,7 @@
     kfree(link->priv);
 } /* ide_detach */
 
-static void idecs_mmio_fixup(ide_hwif_t *hwif)
-{
-	default_hwif_mmiops(hwif);
-	hwif->mmio = 2;
-
-	ide_undecoded_slave(hwif);
-}
-
-static int idecs_register(unsigned long io, unsigned long ctl,
-	unsigned long irq, struct pcmcia_device *handle, int is_mmio)
+static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq, struct pcmcia_device *handle)
 {
     hw_regs_t hw;
     memset(&hw, 0, sizeof(hw));
@@ -163,19 +154,7 @@
     hw.irq = irq;
     hw.chipset = ide_pci;
     hw.dev = &handle->dev;
-
-    if(is_mmio)
-    	return ide_register_hw_with_fixup(&hw, NULL, idecs_mmio_fixup);
-    else
-        return ide_register_hw_with_fixup(&hw, NULL, ide_undecoded_slave);
-}
-
-void outb_io(unsigned char value, unsigned long port) {
-	outb(value, port);
-}
-
-void outb_mem(unsigned char value, unsigned long port) {
-	writeb(value, (void __iomem *) port);
+    return ide_register_hw_with_fixup(&hw, NULL, ide_undecoded_slave);
 }
 
 /*======================================================================
@@ -201,8 +180,7 @@
     } *stk = NULL;
     cistpl_cftable_entry_t *cfg;
     int i, pass, last_ret = 0, last_fn = 0, hd, is_kme = 0;
-    unsigned long io_base, ctl_base, is_mmio, try_slave;
-    void (*my_outb)(unsigned char, unsigned long);
+    unsigned long io_base, ctl_base;
 
     DEBUG(0, "ide_config(0x%p)\n", link);
 
@@ -232,7 +210,7 @@
     /* Not sure if this is right... look up the current Vcc */
     CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &stk->conf));
 
-    pass = io_base = ctl_base = is_mmio = try_slave = 0;
+    pass = io_base = ctl_base = 0;
     tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
     tuple.Attributes = 0;
     CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
@@ -280,45 +258,11 @@
 			goto next_entry;
 		io_base = link->io.BasePort1;
 		ctl_base = link->io.BasePort1 + 0x0e;
-
-		if (io->win[0].len >= 0x20)
-			try_slave = 1;
-
 	    } else goto next_entry;
 	    /* If we've got this far, we're done */
 	    break;
 	}
 
-	if ((cfg->mem.nwin > 0) || (stk->dflt.mem.nwin > 0)) {
-	    win_req_t req;
-	    memreq_t map;
-	    cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &stk->dflt.mem;
-
-	    if (mem->win[0].len < 16)
-	    	goto next_entry;
-
-	    req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
-	    req.Attributes |= WIN_ENABLE;
-	    req.Base = mem->win[0].host_addr;
-	    req.Size = 0;
-
-	    req.AccessSpeed = 0;
-	    if (pcmcia_request_window(&link, &req, &link->win) != 0)
-		goto next_entry;
-	    map.Page = 0; map.CardOffset = mem->win[0].card_addr;
-	    if (pcmcia_map_mem_page(link->win, &map) != 0)
-		goto next_entry;
-
-      	    io_base = (unsigned long) ioremap(req.Base, req.Size);
-    	    ctl_base = io_base + 0x0e;
-    	    is_mmio = 1;
-
-    	    if (mem->win[0].len >= 0x20)
-    	    	try_slave = 1;
-
-	    break;
-	}
-
     next_entry:
 	if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
 	    memcpy(&stk->dflt, cfg, sizeof(stk->dflt));
@@ -334,26 +278,21 @@
     CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
     CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
 
-    if(is_mmio)
-    	my_outb = outb_mem;
-    else
-    	my_outb = outb_io;
-
     /* disable drive interrupts during IDE probe */
-    my_outb(0x02, ctl_base);
+    outb(0x02, ctl_base);
 
     /* special setup for KXLC005 card */
     if (is_kme)
-	my_outb(0x81, ctl_base+1);
+	outb(0x81, ctl_base+1);
 
     /* retry registration in case device is still spinning up */
     for (hd = -1, i = 0; i < 10; i++) {
-	hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link, is_mmio);
+	hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
 	if (hd >= 0) break;
-	if (try_slave) {
-	    my_outb(0x02, ctl_base + 0x10);
+	if (link->io.NumPorts1 == 0x20) {
+	    outb(0x02, ctl_base + 0x10);
 	    hd = idecs_register(io_base + 0x10, ctl_base + 0x10,
-				link->irq.AssignedIRQ, link, is_mmio);
+				link->irq.AssignedIRQ, link);
 	    if (hd >= 0) {
 		io_base += 0x10;
 		ctl_base += 0x10;
diff -urN linux-2.6.18-rc1/drivers/ide/pci/generic.c linux-2.6.18-rc2/drivers/ide/pci/generic.c
--- linux-2.6.18-rc1/drivers/ide/pci/generic.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/ide/pci/generic.c	2006-07-15 22:34:47.437525048 +0000
@@ -212,6 +212,9 @@
 	    (!(PCI_FUNC(dev->devfn) & 1)))
 		goto out;
 
+	if (dev->vendor == PCI_VENDOR_ID_JMICRON && PCI_FUNC(dev->devfn) != 1)
+		goto out;
+
 	pci_read_config_word(dev, PCI_COMMAND, &command);
 	if (!(command & PCI_COMMAND_IO)) {
 		printk(KERN_INFO "Skipping disabled %s IDE controller.\n", d->name);
@@ -239,6 +242,11 @@
 	{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12},
 	{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13},
 	{ PCI_VENDOR_ID_NETCELL,PCI_DEVICE_ID_REVOLUTION,          PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14},
+	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361,	   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 15},
+	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363,	   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 16},
+	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365,	   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 17},
+	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366,	   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 18},
+	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368,	   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 19},
 	/* Must come last. If you add entries adjust this table appropriately and the init_one code */
 	{ PCI_ANY_ID,		PCI_ANY_ID,			   PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 0},
 	{ 0, },
diff -urN linux-2.6.18-rc1/drivers/infiniband/core/cm.c linux-2.6.18-rc2/drivers/infiniband/core/cm.c
--- linux-2.6.18-rc1/drivers/infiniband/core/cm.c	2006-07-15 22:34:42.208957496 +0000
+++ linux-2.6.18-rc2/drivers/infiniband/core/cm.c	2006-07-15 22:34:47.457527219 +0000
@@ -701,7 +701,7 @@
 	}
 }
 
-void ib_destroy_cm_id(struct ib_cm_id *cm_id)
+static void cm_destroy_id(struct ib_cm_id *cm_id, int err)
 {
 	struct cm_id_private *cm_id_priv;
 	struct cm_work *work;
@@ -735,12 +735,22 @@
 			       sizeof cm_id_priv->av.port->cm_dev->ca_guid,
 			       NULL, 0);
 		break;
+	case IB_CM_REQ_RCVD:
+		if (err == -ENOMEM) {
+			/* Do not reject to allow future retries. */
+			cm_reset_to_idle(cm_id_priv);
+			spin_unlock_irqrestore(&cm_id_priv->lock, flags);
+		} else {
+			spin_unlock_irqrestore(&cm_id_priv->lock, flags);
+			ib_send_cm_rej(cm_id, IB_CM_REJ_CONSUMER_DEFINED,
+				       NULL, 0, NULL, 0);
+		}
+		break;
 	case IB_CM_MRA_REQ_RCVD:
 	case IB_CM_REP_SENT:
 	case IB_CM_MRA_REP_RCVD:
 		ib_cancel_mad(cm_id_priv->av.port->mad_agent, cm_id_priv->msg);
 		/* Fall through */
-	case IB_CM_REQ_RCVD:
 	case IB_CM_MRA_REQ_SENT:
 	case IB_CM_REP_RCVD:
 	case IB_CM_MRA_REP_SENT:
@@ -775,6 +785,11 @@
 	kfree(cm_id_priv->private_data);
 	kfree(cm_id_priv);
 }
+
+void ib_destroy_cm_id(struct ib_cm_id *cm_id)
+{
+	cm_destroy_id(cm_id, 0);
+}
 EXPORT_SYMBOL(ib_destroy_cm_id);
 
 int ib_cm_listen(struct ib_cm_id *cm_id, __be64 service_id, __be64 service_mask,
@@ -1163,7 +1178,7 @@
 	}
 	cm_deref_id(cm_id_priv);
 	if (ret)
-		ib_destroy_cm_id(&cm_id_priv->id);
+		cm_destroy_id(&cm_id_priv->id, ret);
 }
 
 static void cm_format_mra(struct cm_mra_msg *mra_msg,
diff -urN linux-2.6.18-rc1/drivers/infiniband/core/cma.c linux-2.6.18-rc2/drivers/infiniband/core/cma.c
--- linux-2.6.18-rc1/drivers/infiniband/core/cma.c	2006-07-15 22:34:42.208957496 +0000
+++ linux-2.6.18-rc2/drivers/infiniband/core/cma.c	2006-07-15 22:34:47.457527219 +0000
@@ -262,14 +262,14 @@
 static int cma_acquire_ib_dev(struct rdma_id_private *id_priv)
 {
 	struct cma_device *cma_dev;
-	union ib_gid *gid;
+	union ib_gid gid;
 	int ret = -ENODEV;
 
-	gid = ib_addr_get_sgid(&id_priv->id.route.addr.dev_addr);
+	ib_addr_get_sgid(&id_priv->id.route.addr.dev_addr, &gid),
 
 	mutex_lock(&lock);
 	list_for_each_entry(cma_dev, &dev_list, list) {
-		ret = ib_find_cached_gid(cma_dev->device, gid,
+		ret = ib_find_cached_gid(cma_dev->device, &gid,
 					 &id_priv->id.port_num, NULL);
 		if (!ret) {
 			cma_attach_to_dev(id_priv, cma_dev);
@@ -812,6 +812,7 @@
 		cma_modify_qp_err(&id_priv->id);
 		status = ib_event->param.rej_rcvd.reason;
 		event = RDMA_CM_EVENT_REJECTED;
+		private_data_len = IB_CM_REJ_PRIVATE_DATA_SIZE;
 		break;
 	default:
 		printk(KERN_ERR "RDMA CMA: unexpected IB CM event: %d",
@@ -1134,8 +1135,8 @@
 	struct ib_sa_path_rec path_rec;
 
 	memset(&path_rec, 0, sizeof path_rec);
-	path_rec.sgid = *ib_addr_get_sgid(addr);
-	path_rec.dgid = *ib_addr_get_dgid(addr);
+	ib_addr_get_sgid(addr, &path_rec.sgid);
+	ib_addr_get_dgid(addr, &path_rec.dgid);
 	path_rec.pkey = cpu_to_be16(ib_addr_get_pkey(addr));
 	path_rec.numb_path = 1;
 
@@ -1263,7 +1264,7 @@
 {
 	struct cma_device *cma_dev;
 	struct ib_port_attr port_attr;
-	union ib_gid *gid;
+	union ib_gid gid;
 	u16 pkey;
 	int ret;
 	u8 p;
@@ -1284,8 +1285,7 @@
 	}
 
 port_found:
-	gid = ib_addr_get_sgid(&id_priv->id.route.addr.dev_addr);
-	ret = ib_get_cached_gid(cma_dev->device, p, 0, gid);
+	ret = ib_get_cached_gid(cma_dev->device, p, 0, &gid);
 	if (ret)
 		goto out;
 
@@ -1293,6 +1293,7 @@
 	if (ret)
 		goto out;
 
+	ib_addr_set_sgid(&id_priv->id.route.addr.dev_addr, &gid);
 	ib_addr_set_pkey(&id_priv->id.route.addr.dev_addr, pkey);
 	id_priv->id.port_num = p;
 	cma_attach_to_dev(id_priv, cma_dev);
@@ -1339,6 +1340,7 @@
 {
 	struct cma_work *work;
 	struct sockaddr_in *src_in, *dst_in;
+	union ib_gid gid;
 	int ret;
 
 	work = kzalloc(sizeof *work, GFP_KERNEL);
@@ -1351,8 +1353,8 @@
 			goto err;
 	}
 
-	ib_addr_set_dgid(&id_priv->id.route.addr.dev_addr,
-			 ib_addr_get_sgid(&id_priv->id.route.addr.dev_addr));
+	ib_addr_get_sgid(&id_priv->id.route.addr.dev_addr, &gid);
+	ib_addr_set_dgid(&id_priv->id.route.addr.dev_addr, &gid);
 
 	if (cma_zero_addr(&id_priv->id.route.addr.src_addr)) {
 		src_in = (struct sockaddr_in *)&id_priv->id.route.addr.src_addr;
diff -urN linux-2.6.18-rc1/drivers/infiniband/core/fmr_pool.c linux-2.6.18-rc2/drivers/infiniband/core/fmr_pool.c
--- linux-2.6.18-rc1/drivers/infiniband/core/fmr_pool.c	2006-07-15 22:34:42.208957496 +0000
+++ linux-2.6.18-rc2/drivers/infiniband/core/fmr_pool.c	2006-07-15 22:34:47.461527654 +0000
@@ -426,7 +426,7 @@
 struct ib_pool_fmr *ib_fmr_pool_map_phys(struct ib_fmr_pool *pool_handle,
 					 u64                *page_list,
 					 int                 list_len,
-					 u64                *io_virtual_address)
+					 u64                 io_virtual_address)
 {
 	struct ib_fmr_pool *pool = pool_handle;
 	struct ib_pool_fmr *fmr;
@@ -440,7 +440,7 @@
 	fmr = ib_fmr_cache_lookup(pool,
 				  page_list,
 				  list_len,
-				  *io_virtual_address);
+				  io_virtual_address);
 	if (fmr) {
 		/* found in cache */
 		++fmr->ref_count;
@@ -464,7 +464,7 @@
 	spin_unlock_irqrestore(&pool->pool_lock, flags);
 
 	result = ib_map_phys_fmr(fmr->fmr, page_list, list_len,
-				 *io_virtual_address);
+				 io_virtual_address);
 
 	if (result) {
 		spin_lock_irqsave(&pool->pool_lock, flags);
@@ -481,7 +481,7 @@
 	fmr->ref_count = 1;
 
 	if (pool->cache_bucket) {
-		fmr->io_virtual_address = *io_virtual_address;
+		fmr->io_virtual_address = io_virtual_address;
 		fmr->page_list_len      = list_len;
 		memcpy(fmr->page_list, page_list, list_len * sizeof(*page_list));
 
diff -urN linux-2.6.18-rc1/drivers/infiniband/core/sa_query.c linux-2.6.18-rc2/drivers/infiniband/core/sa_query.c
--- linux-2.6.18-rc1/drivers/infiniband/core/sa_query.c	2006-07-15 22:34:42.208957496 +0000
+++ linux-2.6.18-rc2/drivers/infiniband/core/sa_query.c	2006-07-15 22:34:47.461527654 +0000
@@ -488,13 +488,13 @@
 	spin_unlock_irqrestore(&tid_lock, flags);
 }
 
-static int send_mad(struct ib_sa_query *query, int timeout_ms)
+static int send_mad(struct ib_sa_query *query, int timeout_ms, gfp_t gfp_mask)
 {
 	unsigned long flags;
 	int ret, id;
 
 retry:
-	if (!idr_pre_get(&query_idr, GFP_ATOMIC))
+	if (!idr_pre_get(&query_idr, gfp_mask))
 		return -ENOMEM;
 	spin_lock_irqsave(&idr_lock, flags);
 	ret = idr_get_new(&query_idr, query, &id);
@@ -630,7 +630,7 @@
 
 	*sa_query = &query->sa_query;
 
-	ret = send_mad(&query->sa_query, timeout_ms);
+	ret = send_mad(&query->sa_query, timeout_ms, gfp_mask);
 	if (ret < 0)
 		goto err2;
 
@@ -752,7 +752,7 @@
 
 	*sa_query = &query->sa_query;
 
-	ret = send_mad(&query->sa_query, timeout_ms);
+	ret = send_mad(&query->sa_query, timeout_ms, gfp_mask);
 	if (ret < 0)
 		goto err2;
 
@@ -844,7 +844,7 @@
 
 	*sa_query = &query->sa_query;
 
-	ret = send_mad(&query->sa_query, timeout_ms);
+	ret = send_mad(&query->sa_query, timeout_ms, gfp_mask);
 	if (ret < 0)
 		goto err2;
 
diff -urN linux-2.6.18-rc1/drivers/infiniband/hw/mthca/mthca_av.c linux-2.6.18-rc2/drivers/infiniband/hw/mthca/mthca_av.c
--- linux-2.6.18-rc1/drivers/infiniband/hw/mthca/mthca_av.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/infiniband/hw/mthca/mthca_av.c	2006-07-15 22:34:47.485530259 +0000
@@ -303,9 +303,10 @@
 	memset(attr, 0, sizeof *attr);
 	attr->dlid          = be16_to_cpu(ah->av->dlid);
 	attr->sl            = be32_to_cpu(ah->av->sl_tclass_flowlabel) >> 28;
-	attr->static_rate   = ah->av->msg_sr & 0x7;
-	attr->src_path_bits = ah->av->g_slid & 0x7F;
 	attr->port_num      = be32_to_cpu(ah->av->port_pd) >> 24;
+	attr->static_rate   = mthca_rate_to_ib(dev, ah->av->msg_sr & 0x7,
+					       attr->port_num);
+	attr->src_path_bits = ah->av->g_slid & 0x7F;
 	attr->ah_flags      = mthca_ah_grh_present(ah) ? IB_AH_GRH : 0;
 
 	if (attr->ah_flags) {
diff -urN linux-2.6.18-rc1/drivers/infiniband/hw/mthca/mthca_qp.c linux-2.6.18-rc2/drivers/infiniband/hw/mthca/mthca_qp.c
--- linux-2.6.18-rc1/drivers/infiniband/hw/mthca/mthca_qp.c	2006-07-15 22:34:42.236960536 +0000
+++ linux-2.6.18-rc2/drivers/infiniband/hw/mthca/mthca_qp.c	2006-07-15 22:34:47.489530693 +0000
@@ -222,9 +222,8 @@
 			 (PAGE_SIZE - 1));
 }
 
-static void mthca_wq_init(struct mthca_wq *wq)
+static void mthca_wq_reset(struct mthca_wq *wq)
 {
-	/* mthca_alloc_qp_common() initializes the locks */
 	wq->next_ind  = 0;
 	wq->last_comp = wq->max - 1;
 	wq->head      = 0;
@@ -845,10 +844,10 @@
 			mthca_cq_clean(dev, to_mcq(qp->ibqp.recv_cq), qp->qpn,
 				       qp->ibqp.srq ? to_msrq(qp->ibqp.srq) : NULL);
 
-		mthca_wq_init(&qp->sq);
+		mthca_wq_reset(&qp->sq);
 		qp->sq.last = get_send_wqe(qp, qp->sq.max - 1);
 
-		mthca_wq_init(&qp->rq);
+		mthca_wq_reset(&qp->rq);
 		qp->rq.last = get_recv_wqe(qp, qp->rq.max - 1);
 
 		if (mthca_is_memfree(dev)) {
@@ -1112,9 +1111,9 @@
 	qp->atomic_rd_en = 0;
 	qp->resp_depth   = 0;
 	qp->sq_policy    = send_policy;
-	mthca_wq_init(&qp->sq);
-	mthca_wq_init(&qp->rq);
-	/* these are initialized separately so lockdep can tell them apart */
+	mthca_wq_reset(&qp->sq);
+	mthca_wq_reset(&qp->rq);
+
 	spin_lock_init(&qp->sq.lock);
 	spin_lock_init(&qp->rq.lock);
 
diff -urN linux-2.6.18-rc1/drivers/infiniband/ulp/iser/iser_verbs.c linux-2.6.18-rc2/drivers/infiniband/ulp/iser/iser_verbs.c
--- linux-2.6.18-rc1/drivers/infiniband/ulp/iser/iser_verbs.c	2006-07-15 22:34:42.240960970 +0000
+++ linux-2.6.18-rc2/drivers/infiniband/ulp/iser/iser_verbs.c	2006-07-15 22:34:47.493531128 +0000
@@ -594,7 +594,7 @@
 	mem  = ib_fmr_pool_map_phys(ib_conn->fmr_pool,
 				    page_list,
 				    page_vec->length,
-				    &io_addr);
+				    io_addr);
 
 	if (IS_ERR(mem)) {
 		status = (int)PTR_ERR(mem);
diff -urN linux-2.6.18-rc1/drivers/infiniband/ulp/srp/ib_srp.c linux-2.6.18-rc2/drivers/infiniband/ulp/srp/ib_srp.c
--- linux-2.6.18-rc1/drivers/infiniband/ulp/srp/ib_srp.c	2006-07-15 22:34:42.244961405 +0000
+++ linux-2.6.18-rc2/drivers/infiniband/ulp/srp/ib_srp.c	2006-07-15 22:34:47.493531128 +0000
@@ -615,9 +615,10 @@
 				(sg_dma_address(&scat[i]) & dev->fmr_page_mask) + j;
 
 	req->fmr = ib_fmr_pool_map_phys(dev->fmr_pool,
-					dma_pages, page_cnt, &io_addr);
+					dma_pages, page_cnt, io_addr);
 	if (IS_ERR(req->fmr)) {
 		ret = PTR_ERR(req->fmr);
+		req->fmr = NULL;
 		goto out;
 	}
 
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/asuscom.c linux-2.6.18-rc2/drivers/isdn/hisax/asuscom.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/asuscom.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/asuscom.c	2006-07-15 22:34:47.521534167 +0000
@@ -297,7 +297,7 @@
 }
 
 #ifdef __ISAPNP__
-static struct isapnp_device_id asus_ids[] __initdata = {
+static struct isapnp_device_id asus_ids[] __devinitdata = {
 	{ ISAPNP_VENDOR('A', 'S', 'U'), ISAPNP_FUNCTION(0x1688),
 	  ISAPNP_VENDOR('A', 'S', 'U'), ISAPNP_FUNCTION(0x1688), 
 	  (unsigned long) "Asus1688 PnP" },
@@ -313,11 +313,11 @@
 	{ 0, }
 };
 
-static struct isapnp_device_id *ipid __initdata = &asus_ids[0];
+static struct isapnp_device_id *ipid __devinitdata = &asus_ids[0];
 static struct pnp_card *pnp_c __devinitdata = NULL;
 #endif
 
-int __init
+int __devinit
 setup_asuscom(struct IsdnCard *card)
 {
 	int bytecnt;
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/avm_a1.c linux-2.6.18-rc2/drivers/isdn/hisax/avm_a1.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/avm_a1.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/avm_a1.c	2006-07-15 22:34:47.521534167 +0000
@@ -178,7 +178,7 @@
 	return(0);
 }
 
-int __init
+int __devinit
 setup_avm_a1(struct IsdnCard *card)
 {
 	u_char val;
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/avm_pci.c linux-2.6.18-rc2/drivers/isdn/hisax/avm_pci.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/avm_pci.c	2006-07-15 22:34:42.268964010 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/avm_pci.c	2006-07-15 22:34:47.521534167 +0000
@@ -639,7 +639,7 @@
 }
 #endif  /*  0  */
 
-static void __init
+static void
 inithdlc(struct IsdnCardState *cs)
 {
 	cs->bcs[0].BC_SetStack = setstack_hdlc;
@@ -727,13 +727,13 @@
 }
 
 #ifdef CONFIG_PCI
-static struct pci_dev *dev_avm __initdata = NULL;
+static struct pci_dev *dev_avm __devinitdata = NULL;
 #endif
 #ifdef __ISAPNP__
-static struct pnp_card *pnp_avm_c __initdata = NULL;
+static struct pnp_card *pnp_avm_c __devinitdata = NULL;
 #endif
 
-int __init
+int __devinit
 setup_avm_pcipnp(struct IsdnCard *card)
 {
 	u_int val, ver;
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/bkm_a4t.c linux-2.6.18-rc2/drivers/isdn/hisax/bkm_a4t.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/bkm_a4t.c	2006-07-15 22:34:42.268964010 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/bkm_a4t.c	2006-07-15 22:34:47.521534167 +0000
@@ -255,9 +255,9 @@
 	return (0);
 }
 
-static struct pci_dev *dev_a4t __initdata = NULL;
+static struct pci_dev *dev_a4t __devinitdata = NULL;
 
-int __init
+int __devinit
 setup_bkm_a4t(struct IsdnCard *card)
 {
 	struct IsdnCardState *cs = card->cs;
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/bkm_a8.c linux-2.6.18-rc2/drivers/isdn/hisax/bkm_a8.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/bkm_a8.c	2006-07-15 22:34:42.268964010 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/bkm_a8.c	2006-07-15 22:34:47.521534167 +0000
@@ -260,7 +260,7 @@
 	return (0);
 }
 
-static int __init
+static int __devinit
 sct_alloc_io(u_int adr, u_int len)
 {
 	if (!request_region(adr, len, "scitel")) {
@@ -272,16 +272,16 @@
 	return(0);
 }
 
-static struct pci_dev *dev_a8 __initdata = NULL;
-static u16  sub_vendor_id __initdata = 0;
-static u16  sub_sys_id __initdata = 0;
-static u_char pci_bus __initdata = 0;
-static u_char pci_device_fn __initdata = 0;
-static u_char pci_irq __initdata = 0;
+static struct pci_dev *dev_a8 __devinitdata = NULL;
+static u16  sub_vendor_id __devinitdata = 0;
+static u16  sub_sys_id __devinitdata = 0;
+static u_char pci_bus __devinitdata = 0;
+static u_char pci_device_fn __devinitdata = 0;
+static u_char pci_irq __devinitdata = 0;
 
 #endif /* CONFIG_PCI */
 
-int __init
+int __devinit
 setup_sct_quadro(struct IsdnCard *card)
 {
 #ifdef CONFIG_PCI
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/config.c linux-2.6.18-rc2/drivers/isdn/hisax/config.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/config.c	2006-07-15 22:34:42.268964010 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/config.c	2006-07-15 22:34:47.521534167 +0000
@@ -1875,7 +1875,7 @@
 #ifdef CONFIG_PCI
 #include <linux/pci.h>
 
-static struct pci_device_id hisax_pci_tbl[] __initdata = {
+static struct pci_device_id hisax_pci_tbl[] __devinitdata = {
 #ifdef CONFIG_HISAX_FRITZPCI
 	{PCI_VENDOR_ID_AVM,      PCI_DEVICE_ID_AVM_A1,           PCI_ANY_ID, PCI_ANY_ID},
 #endif
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/diva.c linux-2.6.18-rc2/drivers/isdn/hisax/diva.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/diva.c	2006-07-15 22:34:42.268964010 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/diva.c	2006-07-15 22:34:47.521534167 +0000
@@ -887,13 +887,13 @@
 	return(0);
 }
 
-static struct pci_dev *dev_diva __initdata = NULL;
-static struct pci_dev *dev_diva_u __initdata = NULL;
-static struct pci_dev *dev_diva201 __initdata = NULL;
-static struct pci_dev *dev_diva202 __initdata = NULL;
+static struct pci_dev *dev_diva __devinitdata = NULL;
+static struct pci_dev *dev_diva_u __devinitdata = NULL;
+static struct pci_dev *dev_diva201 __devinitdata = NULL;
+static struct pci_dev *dev_diva202 __devinitdata = NULL;
 
 #ifdef __ISAPNP__
-static struct isapnp_device_id diva_ids[] __initdata = {
+static struct isapnp_device_id diva_ids[] __devinitdata = {
 	{ ISAPNP_VENDOR('G', 'D', 'I'), ISAPNP_FUNCTION(0x51),
 	  ISAPNP_VENDOR('G', 'D', 'I'), ISAPNP_FUNCTION(0x51), 
 	  (unsigned long) "Diva picola" },
@@ -915,12 +915,12 @@
 	{ 0, }
 };
 
-static struct isapnp_device_id *ipid __initdata = &diva_ids[0];
+static struct isapnp_device_id *ipid __devinitdata = &diva_ids[0];
 static struct pnp_card *pnp_c __devinitdata = NULL;
 #endif
 
 
-int __init
+int __devinit
 setup_diva(struct IsdnCard *card)
 {
 	int bytecnt = 8;
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/enternow_pci.c linux-2.6.18-rc2/drivers/isdn/hisax/enternow_pci.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/enternow_pci.c	2006-07-15 22:34:42.268964010 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/enternow_pci.c	2006-07-15 22:34:47.525534601 +0000
@@ -301,10 +301,10 @@
 }
 
 
-static struct pci_dev *dev_netjet __initdata = NULL;
+static struct pci_dev *dev_netjet __devinitdata = NULL;
 
 /* called by config.c */
-int __init
+int __devinit
 setup_enternow_pci(struct IsdnCard *card)
 {
 	int bytecnt;
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/gazel.c linux-2.6.18-rc2/drivers/isdn/hisax/gazel.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/gazel.c	2006-07-15 22:34:42.268964010 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/gazel.c	2006-07-15 22:34:47.525534601 +0000
@@ -484,7 +484,7 @@
 	return 1;
 }
 
-static int __init
+static int __devinit
 setup_gazelisa(struct IsdnCard *card, struct IsdnCardState *cs)
 {
 	printk(KERN_INFO "Gazel: ISA PnP card automatic recognition\n");
@@ -532,9 +532,9 @@
 	return (0);
 }
 
-static struct pci_dev *dev_tel __initdata = NULL;
+static struct pci_dev *dev_tel __devinitdata = NULL;
 
-static int __init
+static int __devinit
 setup_gazelpci(struct IsdnCardState *cs)
 {
 	u_int pci_ioaddr0 = 0, pci_ioaddr1 = 0;
@@ -621,7 +621,7 @@
 	return (0);
 }
 
-int __init
+int __devinit
 setup_gazel(struct IsdnCard *card)
 {
 	struct IsdnCardState *cs = card->cs;
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/hfc4s8s_l1.c linux-2.6.18-rc2/drivers/isdn/hisax/hfc4s8s_l1.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/hfc4s8s_l1.c	2006-07-15 22:34:42.272964444 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/hfc4s8s_l1.c	2006-07-15 22:34:47.525534601 +0000
@@ -1703,7 +1703,7 @@
 /* driver module exit :              */
 /* release the HFC-4s/8s hardware    */
 /*************************************/
-static void
+static void __exit
 hfc4s8s_module_exit(void)
 {
 	pci_unregister_driver(&hfc4s8s_driver);
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/hfc_2bds0.c linux-2.6.18-rc2/drivers/isdn/hisax/hfc_2bds0.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/hfc_2bds0.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/hfc_2bds0.c	2006-07-15 22:34:47.525534601 +0000
@@ -1015,7 +1015,7 @@
 {
 }
 
-static unsigned int __init
+static unsigned int
 *init_send_hfcd(int cnt)
 {
 	int i, *send;
@@ -1030,7 +1030,7 @@
 	return(send);
 }
 
-void __init
+void
 init2bds0(struct IsdnCardState *cs)
 {
 	cs->setstack_d = setstack_hfcd;
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/hfc_2bs0.c linux-2.6.18-rc2/drivers/isdn/hisax/hfc_2bs0.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/hfc_2bs0.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/hfc_2bs0.c	2006-07-15 22:34:47.525534601 +0000
@@ -551,7 +551,7 @@
 	return (0);
 }
 
-static void __init
+static void
 init_send(struct BCState *bcs)
 {
 	int i;
@@ -565,7 +565,7 @@
 		bcs->hw.hfc.send[i] = 0x1fff;
 }
 
-void __init
+void
 inithfc(struct IsdnCardState *cs)
 {
 	init_send(&cs->bcs[0]);
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/hfc_pci.c linux-2.6.18-rc2/drivers/isdn/hisax/hfc_pci.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/hfc_pci.c	2006-07-15 22:34:42.272964444 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/hfc_pci.c	2006-07-15 22:34:47.525534601 +0000
@@ -1581,7 +1581,7 @@
 /********************************/
 /* called for card init message */
 /********************************/
-static void __init
+static void
 inithfcpci(struct IsdnCardState *cs)
 {
 	cs->bcs[0].BC_SetStack = setstack_2b;
@@ -1638,11 +1638,11 @@
 
 
 /* this variable is used as card index when more than one cards are present */
-static struct pci_dev *dev_hfcpci __initdata = NULL;
+static struct pci_dev *dev_hfcpci __devinitdata = NULL;
 
 #endif				/* CONFIG_PCI */
 
-int __init
+int __devinit
 setup_hfcpci(struct IsdnCard *card)
 {
 	u_long flags;
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/hfcscard.c linux-2.6.18-rc2/drivers/isdn/hisax/hfcscard.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/hfcscard.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/hfcscard.c	2006-07-15 22:34:47.525534601 +0000
@@ -139,7 +139,7 @@
 }
 
 #ifdef __ISAPNP__
-static struct isapnp_device_id hfc_ids[] __initdata = {
+static struct isapnp_device_id hfc_ids[] __devinitdata = {
 	{ ISAPNP_VENDOR('A', 'N', 'X'), ISAPNP_FUNCTION(0x1114),
 	  ISAPNP_VENDOR('A', 'N', 'X'), ISAPNP_FUNCTION(0x1114), 
 	  (unsigned long) "Acer P10" },
@@ -164,11 +164,11 @@
 	{ 0, }
 };
 
-static struct isapnp_device_id *ipid __initdata = &hfc_ids[0];
+static struct isapnp_device_id *ipid __devinitdata = &hfc_ids[0];
 static struct pnp_card *pnp_c __devinitdata = NULL;
 #endif
 
-int __init
+int __devinit
 setup_hfcs(struct IsdnCard *card)
 {
 	struct IsdnCardState *cs = card->cs;
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/icc.c linux-2.6.18-rc2/drivers/isdn/hisax/icc.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/icc.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/icc.c	2006-07-15 22:34:47.529535036 +0000
@@ -24,10 +24,10 @@
 #define DBUSY_TIMER_VALUE 80
 #define ARCOFI_USE 0
 
-static char *ICCVer[] __initdata =
+static char *ICCVer[] =
 {"2070 A1/A3", "2070 B1", "2070 B2/B3", "2070 V2.4"};
 
-void __init
+void
 ICCVersion(struct IsdnCardState *cs, char *s)
 {
 	int val;
@@ -613,7 +613,7 @@
 	}
 }
 
-void __init
+void
 initicc(struct IsdnCardState *cs)
 {
 	cs->setstack_d = setstack_icc;
@@ -646,7 +646,7 @@
 	ph_command(cs, ICC_CMD_DI);
 }
 
-void __init
+void
 clear_pending_icc_ints(struct IsdnCardState *cs)
 {
 	int val, eval;
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/icc.h linux-2.6.18-rc2/drivers/isdn/hisax/icc.h
--- linux-2.6.18-rc1/drivers/isdn/hisax/icc.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/icc.h	2006-07-15 22:34:47.529535036 +0000
@@ -65,7 +65,7 @@
 #define ICC_IND_AIL    0xE
 #define ICC_IND_DC     0xF
 
-extern void __init ICCVersion(struct IsdnCardState *cs, char *s);
+extern void ICCVersion(struct IsdnCardState *cs, char *s);
 extern void initicc(struct IsdnCardState *cs);
 extern void icc_interrupt(struct IsdnCardState *cs, u_char val);
 extern void clear_pending_icc_ints(struct IsdnCardState *cs);
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/ipacx.c linux-2.6.18-rc2/drivers/isdn/hisax/ipacx.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/ipacx.c	2006-07-15 22:34:42.272964444 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/ipacx.c	2006-07-15 22:34:47.529535036 +0000
@@ -38,8 +38,8 @@
 static void dch_empty_fifo(struct IsdnCardState *cs, int count);
 static void dch_fill_fifo(struct IsdnCardState *cs);
 static inline void dch_int(struct IsdnCardState *cs);
-static void __devinit dch_setstack(struct PStack *st, struct IsdnCardState *cs);
-static void __devinit dch_init(struct IsdnCardState *cs);
+static void dch_setstack(struct PStack *st, struct IsdnCardState *cs);
+static void dch_init(struct IsdnCardState *cs);
 static void bch_l2l1(struct PStack *st, int pr, void *arg);
 static void bch_empty_fifo(struct BCState *bcs, int count);
 static void bch_fill_fifo(struct BCState *bcs);
@@ -48,8 +48,8 @@
 static void bch_close_state(struct BCState *bcs);
 static int bch_open_state(struct IsdnCardState *cs, struct BCState *bcs);
 static int bch_setstack(struct PStack *st, struct BCState *bcs);
-static void __devinit bch_init(struct IsdnCardState *cs, int hscx);
-static void __init clear_pending_ints(struct IsdnCardState *cs);
+static void bch_init(struct IsdnCardState *cs, int hscx);
+static void clear_pending_ints(struct IsdnCardState *cs);
 
 //----------------------------------------------------------
 // Issue Layer 1 command to chip
@@ -408,7 +408,7 @@
 
 //----------------------------------------------------------
 //----------------------------------------------------------
-static void __devinit
+static void
 dch_setstack(struct PStack *st, struct IsdnCardState *cs)
 {
 	st->l1.l1hw = dch_l2l1;
@@ -416,7 +416,7 @@
 
 //----------------------------------------------------------
 //----------------------------------------------------------
-static void __devinit
+static void
 dch_init(struct IsdnCardState *cs)
 {
 	printk(KERN_INFO "HiSax: IPACX ISDN driver v0.1.0\n");
@@ -823,7 +823,7 @@
 
 //----------------------------------------------------------
 //----------------------------------------------------------
-static void __devinit
+static void
 bch_init(struct IsdnCardState *cs, int hscx)
 {
 	cs->bcs[hscx].BC_SetStack   = bch_setstack;
@@ -861,7 +861,7 @@
 //----------------------------------------------------------
 // Clears chip interrupt status
 //----------------------------------------------------------
-static void __init
+static void
 clear_pending_ints(struct IsdnCardState *cs)
 {
 	int ista;
@@ -883,7 +883,7 @@
 // Does chip configuration work
 // Work to do depends on bit mask in part
 //----------------------------------------------------------
-void __init
+void
 init_ipacx(struct IsdnCardState *cs, int part)
 {
 	if (part &1) {  // initialise chip
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/isurf.c linux-2.6.18-rc2/drivers/isdn/hisax/isurf.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/isurf.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/isurf.c	2006-07-15 22:34:47.529535036 +0000
@@ -196,10 +196,10 @@
 }
 
 #ifdef __ISAPNP__
-static struct pnp_card *pnp_c __initdata = NULL;
+static struct pnp_card *pnp_c __devinitdata = NULL;
 #endif
 
-int __init
+int __devinit
 setup_isurf(struct IsdnCard *card)
 {
 	int ver;
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/ix1_micro.c linux-2.6.18-rc2/drivers/isdn/hisax/ix1_micro.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/ix1_micro.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/ix1_micro.c	2006-07-15 22:34:47.529535036 +0000
@@ -210,7 +210,7 @@
 }
 
 #ifdef __ISAPNP__
-static struct isapnp_device_id itk_ids[] __initdata = {
+static struct isapnp_device_id itk_ids[] __devinitdata = {
 	{ ISAPNP_VENDOR('I', 'T', 'K'), ISAPNP_FUNCTION(0x25),
 	  ISAPNP_VENDOR('I', 'T', 'K'), ISAPNP_FUNCTION(0x25), 
 	  (unsigned long) "ITK micro 2" },
@@ -220,12 +220,12 @@
 	{ 0, }
 };
 
-static struct isapnp_device_id *ipid __initdata = &itk_ids[0];
+static struct isapnp_device_id *ipid __devinitdata = &itk_ids[0];
 static struct pnp_card *pnp_c __devinitdata = NULL;
 #endif
 
 
-int __init
+int __devinit
 setup_ix1micro(struct IsdnCard *card)
 {
 	struct IsdnCardState *cs = card->cs;
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/jade.c linux-2.6.18-rc2/drivers/isdn/hisax/jade.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/jade.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/jade.c	2006-07-15 22:34:47.529535036 +0000
@@ -19,7 +19,7 @@
 #include <linux/interrupt.h>
 
 
-int __init
+int
 JadeVersion(struct IsdnCardState *cs, char *s)
 {
     int ver,i;
@@ -253,7 +253,7 @@
 	return (0);
 }
 
-void __init
+void
 clear_pending_jade_ints(struct IsdnCardState *cs)
 {
 	int val;
@@ -279,7 +279,7 @@
 	cs->BC_Write_Reg(cs, 1, jade_HDLC_IMR, 0xF8);
 }
 
-void __init
+void
 initjade(struct IsdnCardState *cs)
 {
 	cs->bcs[0].BC_SetStack = setstack_jade;
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/mic.c linux-2.6.18-rc2/drivers/isdn/hisax/mic.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/mic.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/mic.c	2006-07-15 22:34:47.529535036 +0000
@@ -189,7 +189,7 @@
 	return(0);
 }
 
-int __init
+int __devinit
 setup_mic(struct IsdnCard *card)
 {
 	int bytecnt;
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/netjet.c linux-2.6.18-rc2/drivers/isdn/hisax/netjet.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/netjet.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/netjet.c	2006-07-15 22:34:47.529535036 +0000
@@ -909,7 +909,7 @@
 }
 
  
-void __init
+void
 inittiger(struct IsdnCardState *cs)
 {
 	if (!(cs->bcs[0].hw.tiger.send = kmalloc(NETJET_DMA_TXSIZE * sizeof(unsigned int),
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/niccy.c linux-2.6.18-rc2/drivers/isdn/hisax/niccy.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/niccy.c	2006-07-15 22:34:42.276964879 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/niccy.c	2006-07-15 22:34:47.533535470 +0000
@@ -232,12 +232,12 @@
 	return(0);
 }
 
-static struct pci_dev *niccy_dev __initdata = NULL;
+static struct pci_dev *niccy_dev __devinitdata = NULL;
 #ifdef __ISAPNP__
 static struct pnp_card *pnp_c __devinitdata = NULL;
 #endif
 
-int __init
+int __devinit
 setup_niccy(struct IsdnCard *card)
 {
 	struct IsdnCardState *cs = card->cs;
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/nj_s.c linux-2.6.18-rc2/drivers/isdn/hisax/nj_s.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/nj_s.c	2006-07-15 22:34:42.276964879 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/nj_s.c	2006-07-15 22:34:47.533535470 +0000
@@ -148,9 +148,9 @@
 	return(0);
 }
 
-static struct pci_dev *dev_netjet __initdata = NULL;
+static struct pci_dev *dev_netjet __devinitdata = NULL;
 
-int __init
+int __devinit
 setup_netjet_s(struct IsdnCard *card)
 {
 	int bytecnt,cfg;
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/nj_u.c linux-2.6.18-rc2/drivers/isdn/hisax/nj_u.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/nj_u.c	2006-07-15 22:34:42.276964879 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/nj_u.c	2006-07-15 22:34:47.533535470 +0000
@@ -128,9 +128,9 @@
 	return(0);
 }
 
-static struct pci_dev *dev_netjet __initdata = NULL;
+static struct pci_dev *dev_netjet __devinitdata = NULL;
 
-int __init
+int __devinit
 setup_netjet_u(struct IsdnCard *card)
 {
 	int bytecnt;
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/s0box.c linux-2.6.18-rc2/drivers/isdn/hisax/s0box.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/s0box.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/s0box.c	2006-07-15 22:34:47.533535470 +0000
@@ -211,7 +211,7 @@
 	return(0);
 }
 
-int __init
+int __devinit
 setup_s0box(struct IsdnCard *card)
 {
 	struct IsdnCardState *cs = card->cs;
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/saphir.c linux-2.6.18-rc2/drivers/isdn/hisax/saphir.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/saphir.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/saphir.c	2006-07-15 22:34:47.533535470 +0000
@@ -241,7 +241,7 @@
 }
 
 
-int __init
+int __devinit
 setup_saphir(struct IsdnCard *card)
 {
 	struct IsdnCardState *cs = card->cs;
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/sportster.c linux-2.6.18-rc2/drivers/isdn/hisax/sportster.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/sportster.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/sportster.c	2006-07-15 22:34:47.533535470 +0000
@@ -184,7 +184,7 @@
 	return(0);
 }
 
-static int __init
+static int __devinit
 get_io_range(struct IsdnCardState *cs)
 {
 	int i, j, adr;
@@ -209,7 +209,7 @@
 	}
 }
 
-int __init
+int __devinit
 setup_sportster(struct IsdnCard *card)
 {
 	struct IsdnCardState *cs = card->cs;
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/teleint.c linux-2.6.18-rc2/drivers/isdn/hisax/teleint.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/teleint.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/teleint.c	2006-07-15 22:34:47.533535470 +0000
@@ -261,7 +261,7 @@
 	return(0);
 }
 
-int __init
+int __devinit
 setup_TeleInt(struct IsdnCard *card)
 {
 	struct IsdnCardState *cs = card->cs;
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/teles0.c linux-2.6.18-rc2/drivers/isdn/hisax/teles0.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/teles0.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/teles0.c	2006-07-15 22:34:47.533535470 +0000
@@ -265,7 +265,7 @@
 	return(0);
 }
 
-int __init
+int __devinit
 setup_teles0(struct IsdnCard *card)
 {
 	u_char val;
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/telespci.c linux-2.6.18-rc2/drivers/isdn/hisax/telespci.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/telespci.c	2006-07-15 22:34:42.276964879 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/telespci.c	2006-07-15 22:34:47.533535470 +0000
@@ -284,9 +284,9 @@
 	return(0);
 }
 
-static struct pci_dev *dev_tel __initdata = NULL;
+static struct pci_dev *dev_tel __devinitdata = NULL;
 
-int __init
+int __devinit
 setup_telespci(struct IsdnCard *card)
 {
 	struct IsdnCardState *cs = card->cs;
diff -urN linux-2.6.18-rc1/drivers/isdn/hisax/w6692.c linux-2.6.18-rc2/drivers/isdn/hisax/w6692.c
--- linux-2.6.18-rc1/drivers/isdn/hisax/w6692.c	2006-07-15 22:34:42.276964879 +0000
+++ linux-2.6.18-rc2/drivers/isdn/hisax/w6692.c	2006-07-15 22:34:47.533535470 +0000
@@ -44,11 +44,11 @@
 
 #define DBUSY_TIMER_VALUE 80
 
-static char *W6692Ver[] __initdata =
+static char *W6692Ver[] =
 {"W6692 V00", "W6692 V01", "W6692 V10",
  "W6692 V11"};
 
-static void __init
+static void
 W6692Version(struct IsdnCardState *cs, char *s)
 {
 	int val;
@@ -897,7 +897,7 @@
 	}
 }
 
-static void __init initW6692(struct IsdnCardState *cs, int part)
+static void initW6692(struct IsdnCardState *cs, int part)
 {
 	if (part & 1) {
 		cs->setstack_d = setstack_W6692;
@@ -992,9 +992,9 @@
 
 static int id_idx ;
 
-static struct pci_dev *dev_w6692 __initdata = NULL;
+static struct pci_dev *dev_w6692 __devinitdata = NULL;
 
-int __init 
+int __devinit
 setup_w6692(struct IsdnCard *card)
 {
 	struct IsdnCardState *cs = card->cs;
diff -urN linux-2.6.18-rc1/drivers/isdn/i4l/isdn_common.c linux-2.6.18-rc2/drivers/isdn/i4l/isdn_common.c
--- linux-2.6.18-rc1/drivers/isdn/i4l/isdn_common.c	2006-07-15 22:34:42.280965313 +0000
+++ linux-2.6.18-rc2/drivers/isdn/i4l/isdn_common.c	2006-07-15 22:34:47.537535904 +0000
@@ -1059,7 +1059,7 @@
 static ssize_t
 isdn_read(struct file *file, char __user *buf, size_t count, loff_t * off)
 {
-	uint minor = MINOR(file->f_dentry->d_inode->i_rdev);
+	uint minor = iminor(file->f_dentry->d_inode);
 	int len = 0;
 	int drvidx;
 	int chidx;
@@ -1163,7 +1163,7 @@
 static ssize_t
 isdn_write(struct file *file, const char __user *buf, size_t count, loff_t * off)
 {
-	uint minor = MINOR(file->f_dentry->d_inode->i_rdev);
+	uint minor = iminor(file->f_dentry->d_inode);
 	int drvidx;
 	int chidx;
 	int retval;
@@ -1225,7 +1225,7 @@
 isdn_poll(struct file *file, poll_table * wait)
 {
 	unsigned int mask = 0;
-	unsigned int minor = MINOR(file->f_dentry->d_inode->i_rdev);
+	unsigned int minor = iminor(file->f_dentry->d_inode);
 	int drvidx = isdn_minor2drv(minor - ISDN_MINOR_CTRL);
 
 	lock_kernel();
@@ -1266,7 +1266,7 @@
 static int
 isdn_ioctl(struct inode *inode, struct file *file, uint cmd, ulong arg)
 {
-	uint minor = MINOR(inode->i_rdev);
+	uint minor = iminor(inode);
 	isdn_ctrl c;
 	int drvidx;
 	int chidx;
@@ -1717,7 +1717,7 @@
 static int
 isdn_open(struct inode *ino, struct file *filep)
 {
-	uint minor = MINOR(ino->i_rdev);
+	uint minor = iminor(ino);
 	int drvidx;
 	int chidx;
 	int retval = -ENODEV;
@@ -1779,7 +1779,7 @@
 static int
 isdn_close(struct inode *ino, struct file *filep)
 {
-	uint minor = MINOR(ino->i_rdev);
+	uint minor = iminor(ino);
 
 	lock_kernel();
 	if (minor == ISDN_MINOR_STATUS) {
diff -urN linux-2.6.18-rc1/drivers/isdn/i4l/isdn_ppp.c linux-2.6.18-rc2/drivers/isdn/i4l/isdn_ppp.c
--- linux-2.6.18-rc1/drivers/isdn/i4l/isdn_ppp.c	2006-07-15 22:34:42.280965313 +0000
+++ linux-2.6.18-rc2/drivers/isdn/i4l/isdn_ppp.c	2006-07-15 22:34:47.537535904 +0000
@@ -667,7 +667,7 @@
 
 	if (is->debug & 0x2)
 		printk(KERN_DEBUG "isdn_ppp_poll: minor: %d\n",
-				MINOR(file->f_dentry->d_inode->i_rdev));
+				iminor(file->f_dentry->d_inode));
 
 	/* just registers wait_queue hook. This doesn't really wait. */
 	poll_wait(file, &is->wq, wait);
diff -urN linux-2.6.18-rc1/drivers/leds/Kconfig linux-2.6.18-rc2/drivers/leds/Kconfig
--- linux-2.6.18-rc1/drivers/leds/Kconfig	2006-07-15 22:34:42.284965747 +0000
+++ linux-2.6.18-rc2/drivers/leds/Kconfig	2006-07-15 22:34:47.541536338 +0000
@@ -69,6 +69,13 @@
 	help
 	  This option enables support for the LEDs on Amstrad Delta (E3).
 
+config LEDS_NET48XX
+	tristate "LED Support for Soekris net48xx series Error LED"
+	depends on LEDS_CLASS && SCx200_GPIO
+	help
+	  This option enables support for the Soekris net4801 and net4826 error
+	  LED.
+
 comment "LED Triggers"
 
 config LEDS_TRIGGERS
diff -urN linux-2.6.18-rc1/drivers/leds/Makefile linux-2.6.18-rc2/drivers/leds/Makefile
--- linux-2.6.18-rc1/drivers/leds/Makefile	2006-07-15 22:34:42.284965747 +0000
+++ linux-2.6.18-rc2/drivers/leds/Makefile	2006-07-15 22:34:47.541536338 +0000
@@ -12,6 +12,7 @@
 obj-$(CONFIG_LEDS_TOSA)			+= leds-tosa.o
 obj-$(CONFIG_LEDS_S3C24XX)		+= leds-s3c24xx.o
 obj-$(CONFIG_LEDS_AMS_DELTA)		+= leds-ams-delta.o
+obj-$(CONFIG_LEDS_NET48XX)		+= leds-net48xx.o
 
 # LED Triggers
 obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
diff -urN linux-2.6.18-rc1/drivers/leds/leds-net48xx.c linux-2.6.18-rc2/drivers/leds/leds-net48xx.c
--- linux-2.6.18-rc1/drivers/leds/leds-net48xx.c	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/drivers/leds/leds-net48xx.c	2006-07-15 22:34:47.541536338 +0000
@@ -0,0 +1,116 @@
+/*
+ * LEDs driver for Soekris net48xx
+ *
+ * Copyright (C) 2006 Chris Boot <bootc@bootc.net>
+ *
+ * Based on leds-ams-delta.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+#include <asm/io.h>
+#include <linux/scx200_gpio.h>
+
+#define DRVNAME "net48xx-led"
+#define NET48XX_ERROR_LED_GPIO	20
+
+static struct platform_device *pdev;
+
+static void net48xx_error_led_set(struct led_classdev *led_cdev,
+		enum led_brightness value)
+{
+	if (value)
+		scx200_gpio_set_high(NET48XX_ERROR_LED_GPIO);
+	else
+		scx200_gpio_set_low(NET48XX_ERROR_LED_GPIO);
+}
+
+static struct led_classdev net48xx_error_led = {
+	.name		= "net48xx:error",
+	.brightness_set	= net48xx_error_led_set,
+};
+
+#ifdef CONFIG_PM
+static int net48xx_led_suspend(struct platform_device *dev,
+		pm_message_t state)
+{
+	led_classdev_suspend(&net48xx_error_led);
+	return 0;
+}
+
+static int net48xx_led_resume(struct platform_device *dev)
+{
+	led_classdev_resume(&net48xx_error_led);
+	return 0;
+}
+#else
+#define net48xx_led_suspend NULL
+#define net48xx_led_resume NULL
+#endif
+
+static int net48xx_led_probe(struct platform_device *pdev)
+{
+	return led_classdev_register(&pdev->dev, &net48xx_error_led);
+}
+
+static int net48xx_led_remove(struct platform_device *pdev)
+{
+	led_classdev_unregister(&net48xx_error_led);
+	return 0;
+}
+
+static struct platform_driver net48xx_led_driver = {
+	.probe		= net48xx_led_probe,
+	.remove		= net48xx_led_remove,
+	.suspend	= net48xx_led_suspend,
+	.resume		= net48xx_led_resume,
+	.driver		= {
+		.name		= DRVNAME,
+		.owner		= THIS_MODULE,
+	},
+};
+
+static int __init net48xx_led_init(void)
+{
+	int ret;
+
+	if (!scx200_gpio_present()) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	ret = platform_driver_register(&net48xx_led_driver);
+	if (ret < 0)
+		goto out;
+
+	pdev = platform_device_register_simple(DRVNAME, -1, NULL, 0);
+	if (IS_ERR(pdev)) {
+		ret = PTR_ERR(pdev);
+		platform_driver_unregister(&net48xx_led_driver);
+		goto out;
+	}
+
+out:
+	return ret;
+}
+
+static void __exit net48xx_led_exit(void)
+{
+	platform_device_unregister(pdev);
+	platform_driver_unregister(&net48xx_led_driver);
+}
+
+module_init(net48xx_led_init);
+module_exit(net48xx_led_exit);
+
+MODULE_AUTHOR("Chris Boot <bootc@bootc.net>");
+MODULE_DESCRIPTION("Soekris net48xx LED driver");
+MODULE_LICENSE("GPL");
+
diff -urN linux-2.6.18-rc1/drivers/macintosh/Kconfig linux-2.6.18-rc2/drivers/macintosh/Kconfig
--- linux-2.6.18-rc1/drivers/macintosh/Kconfig	2006-07-15 22:34:42.284965747 +0000
+++ linux-2.6.18-rc2/drivers/macintosh/Kconfig	2006-07-15 22:34:47.545536773 +0000
@@ -113,7 +113,10 @@
 
 config PMAC_BACKLIGHT
 	bool "Backlight control for LCD screens"
-	depends on ADB_PMU && (BROKEN || !PPC64)
+	depends on ADB_PMU && FB = y && (BROKEN || !PPC64)
+	select FB_BACKLIGHT
+	select BACKLIGHT_CLASS_DEVICE
+	select BACKLIGHT_LCD_SUPPORT
 	help
 	  Say Y here to enable Macintosh specific extensions of the generic
 	  backlight code. With this enabled, the brightness keys on older
diff -urN linux-2.6.18-rc1/drivers/macintosh/macio_asic.c linux-2.6.18-rc2/drivers/macintosh/macio_asic.c
--- linux-2.6.18-rc1/drivers/macintosh/macio_asic.c	2006-07-15 22:34:42.288966181 +0000
+++ linux-2.6.18-rc2/drivers/macintosh/macio_asic.c	2006-07-15 22:34:47.545536773 +0000
@@ -330,7 +330,7 @@
 {
 	unsigned int irq;
 
-	irq = irq_create_mapping(NULL, line, 0);
+	irq = irq_create_mapping(NULL, line);
 	if (irq != NO_IRQ) {
 		dev->interrupt[index].start = irq;
 		dev->interrupt[index].flags = IORESOURCE_IRQ;
diff -urN linux-2.6.18-rc1/drivers/macintosh/smu.c linux-2.6.18-rc2/drivers/macintosh/smu.c
--- linux-2.6.18-rc1/drivers/macintosh/smu.c	2006-07-15 22:34:42.288966181 +0000
+++ linux-2.6.18-rc2/drivers/macintosh/smu.c	2006-07-15 22:34:47.545536773 +0000
@@ -75,9 +75,11 @@
 	struct of_device	*of_dev;
 	int			doorbell;	/* doorbell gpio */
 	u32 __iomem		*db_buf;	/* doorbell buffer */
-	int			db_irq;
+	struct device_node	*db_node;
+	unsigned int		db_irq;
 	int			msg;
-	int			msg_irq;
+	struct device_node	*msg_node;
+	unsigned int		msg_irq;
 	struct smu_cmd_buf	*cmd_buf;	/* command buffer virtual */
 	u32			cmd_buf_abs;	/* command buffer absolute */
 	struct list_head	cmd_list;
@@ -93,6 +95,7 @@
  */
 static struct smu_device	*smu;
 static DEFINE_MUTEX(smu_part_access);
+static int smu_irq_inited;
 
 static void smu_i2c_retry(unsigned long data);
 
@@ -257,6 +260,10 @@
 		smu_start_cmd();
 	spin_unlock_irqrestore(&smu->lock, flags);
 
+	/* Workaround for early calls when irq isn't available */
+	if (!smu_irq_inited || smu->db_irq == NO_IRQ)
+		smu_spinwait_cmd(cmd);
+
 	return 0;
 }
 EXPORT_SYMBOL(smu_queue_cmd);
@@ -478,14 +485,15 @@
 	smu->cmd_buf_abs = (u32)smu_cmdbuf_abs;
 	smu->cmd_buf = (struct smu_cmd_buf *)abs_to_virt(smu_cmdbuf_abs);
 
-	np = of_find_node_by_name(NULL, "smu-doorbell");
-	if (np == NULL) {
+	smu->db_node = of_find_node_by_name(NULL, "smu-doorbell");
+	if (smu->db_node == NULL) {
 		printk(KERN_ERR "SMU: Can't find doorbell GPIO !\n");
 		goto fail;
 	}
-	data = (u32 *)get_property(np, "reg", NULL);
+	data = (u32 *)get_property(smu->db_node, "reg", NULL);
 	if (data == NULL) {
-		of_node_put(np);
+		of_node_put(smu->db_node);
+		smu->db_node = NULL;
 		printk(KERN_ERR "SMU: Can't find doorbell GPIO address !\n");
 		goto fail;
 	}
@@ -497,25 +505,21 @@
 	smu->doorbell = *data;
 	if (smu->doorbell < 0x50)
 		smu->doorbell += 0x50;
-	smu->db_irq = irq_of_parse_and_map(np, 0);
-
-	of_node_put(np);
 
 	/* Now look for the smu-interrupt GPIO */
 	do {
-		np = of_find_node_by_name(NULL, "smu-interrupt");
-		if (np == NULL)
+		smu->msg_node = of_find_node_by_name(NULL, "smu-interrupt");
+		if (smu->msg_node == NULL)
 			break;
-		data = (u32 *)get_property(np, "reg", NULL);
+		data = (u32 *)get_property(smu->msg_node, "reg", NULL);
 		if (data == NULL) {
-			of_node_put(np);
+			of_node_put(smu->msg_node);
+			smu->msg_node = NULL;
 			break;
 		}
 		smu->msg = *data;
 		if (smu->msg < 0x50)
 			smu->msg += 0x50;
-		smu->msg_irq = irq_of_parse_and_map(np, 0);
-		of_node_put(np);
 	} while(0);
 
 	/* Doorbell buffer is currently hard-coded, I didn't find a proper
@@ -547,6 +551,19 @@
 	smu->i2c_timer.function = smu_i2c_retry;
 	smu->i2c_timer.data = (unsigned long)smu;
 
+	if (smu->db_node) {
+		smu->db_irq = irq_of_parse_and_map(smu->db_node, 0);
+		if (smu->db_irq == NO_IRQ)
+			printk(KERN_ERR "smu: failed to map irq for node %s\n",
+			       smu->db_node->full_name);
+	}
+	if (smu->msg_node) {
+		smu->msg_irq = irq_of_parse_and_map(smu->msg_node, 0);
+		if (smu->msg_irq == NO_IRQ)
+			printk(KERN_ERR "smu: failed to map irq for node %s\n",
+			       smu->msg_node->full_name);
+	}
+
 	/*
 	 * Try to request the interrupts
 	 */
@@ -571,6 +588,7 @@
 		}
 	}
 
+	smu_irq_inited = 1;
 	return 0;
 }
 /* This has to be before arch_initcall as the low i2c stuff relies on the
@@ -742,6 +760,11 @@
 	if (fail && --cmd->retries > 0) {
 		DPRINTK("SMU: i2c failure, starting timer...\n");
 		BUG_ON(cmd != smu->cmd_i2c_cur);
+		if (!smu_irq_inited) {
+			mdelay(5);
+			smu_i2c_retry(0);
+			return;
+		}
 		mod_timer(&smu->i2c_timer, jiffies + msecs_to_jiffies(5));
 		return;
 	}
diff -urN linux-2.6.18-rc1/drivers/md/md.c linux-2.6.18-rc2/drivers/md/md.c
--- linux-2.6.18-rc1/drivers/md/md.c	2006-07-15 22:34:42.304967918 +0000
+++ linux-2.6.18-rc2/drivers/md/md.c	2006-07-15 22:34:47.561538510 +0000
@@ -110,7 +110,7 @@
 		.procname	= "speed_limit_min",
 		.data		= &sysctl_speed_limit_min,
 		.maxlen		= sizeof(int),
-		.mode		= 0644,
+		.mode		= S_IRUGO|S_IWUSR,
 		.proc_handler	= &proc_dointvec,
 	},
 	{
@@ -118,7 +118,7 @@
 		.procname	= "speed_limit_max",
 		.data		= &sysctl_speed_limit_max,
 		.maxlen		= sizeof(int),
-		.mode		= 0644,
+		.mode		= S_IRUGO|S_IWUSR,
 		.proc_handler	= &proc_dointvec,
 	},
 	{ .ctl_name = 0 }
@@ -129,7 +129,7 @@
 		.ctl_name	= DEV_RAID,
 		.procname	= "raid",
 		.maxlen		= 0,
-		.mode		= 0555,
+		.mode		= S_IRUGO|S_IXUGO,
 		.child		= raid_table,
 	},
 	{ .ctl_name = 0 }
@@ -1062,6 +1062,11 @@
 	if (rdev->sb_size & bmask)
 		rdev-> sb_size = (rdev->sb_size | bmask)+1;
 
+	if (sb->level == cpu_to_le32(LEVEL_MULTIPATH))
+		rdev->desc_nr = -1;
+	else
+		rdev->desc_nr = le32_to_cpu(sb->dev_number);
+
 	if (refdev == 0)
 		ret = 1;
 	else {
@@ -1171,7 +1176,6 @@
 	}
 	if (mddev->level != LEVEL_MULTIPATH) {
 		int role;
-		rdev->desc_nr = le32_to_cpu(sb->dev_number);
 		role = le16_to_cpu(sb->dev_roles[rdev->desc_nr]);
 		switch(role) {
 		case 0xffff: /* spare */
@@ -1779,8 +1783,8 @@
 	}
 	return err ? err : len;
 }
-static struct rdev_sysfs_entry
-rdev_state = __ATTR(state, 0644, state_show, state_store);
+static struct rdev_sysfs_entry rdev_state =
+__ATTR(state, S_IRUGO|S_IWUSR, state_show, state_store);
 
 static ssize_t
 super_show(mdk_rdev_t *rdev, char *page)
@@ -1811,7 +1815,7 @@
 	return -EINVAL;
 }
 static struct rdev_sysfs_entry rdev_errors =
-__ATTR(errors, 0644, errors_show, errors_store);
+__ATTR(errors, S_IRUGO|S_IWUSR, errors_show, errors_store);
 
 static ssize_t
 slot_show(mdk_rdev_t *rdev, char *page)
@@ -1845,7 +1849,7 @@
 
 
 static struct rdev_sysfs_entry rdev_slot =
-__ATTR(slot, 0644, slot_show, slot_store);
+__ATTR(slot, S_IRUGO|S_IWUSR, slot_show, slot_store);
 
 static ssize_t
 offset_show(mdk_rdev_t *rdev, char *page)
@@ -1867,7 +1871,7 @@
 }
 
 static struct rdev_sysfs_entry rdev_offset =
-__ATTR(offset, 0644, offset_show, offset_store);
+__ATTR(offset, S_IRUGO|S_IWUSR, offset_show, offset_store);
 
 static ssize_t
 rdev_size_show(mdk_rdev_t *rdev, char *page)
@@ -1891,7 +1895,7 @@
 }
 
 static struct rdev_sysfs_entry rdev_size =
-__ATTR(size, 0644, rdev_size_show, rdev_size_store);
+__ATTR(size, S_IRUGO|S_IWUSR, rdev_size_show, rdev_size_store);
 
 static struct attribute *rdev_default_attrs[] = {
 	&rdev_state.attr,
@@ -1922,6 +1926,8 @@
 
 	if (!entry->store)
 		return -EIO;
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
 	return entry->store(rdev, page, length);
 }
 
@@ -2128,7 +2134,7 @@
 	return len;
 }
 static struct md_sysfs_entry md_safe_delay =
-__ATTR(safe_mode_delay, 0644,safe_delay_show, safe_delay_store);
+__ATTR(safe_mode_delay, S_IRUGO|S_IWUSR,safe_delay_show, safe_delay_store);
 
 static ssize_t
 level_show(mddev_t *mddev, char *page)
@@ -2163,7 +2169,7 @@
 }
 
 static struct md_sysfs_entry md_level =
-__ATTR(level, 0644, level_show, level_store);
+__ATTR(level, S_IRUGO|S_IWUSR, level_show, level_store);
 
 
 static ssize_t
@@ -2188,7 +2194,7 @@
 	return len;
 }
 static struct md_sysfs_entry md_layout =
-__ATTR(layout, 0655, layout_show, layout_store);
+__ATTR(layout, S_IRUGO|S_IWUSR, layout_show, layout_store);
 
 
 static ssize_t
@@ -2219,7 +2225,7 @@
 	return rv ? rv : len;
 }
 static struct md_sysfs_entry md_raid_disks =
-__ATTR(raid_disks, 0644, raid_disks_show, raid_disks_store);
+__ATTR(raid_disks, S_IRUGO|S_IWUSR, raid_disks_show, raid_disks_store);
 
 static ssize_t
 chunk_size_show(mddev_t *mddev, char *page)
@@ -2243,7 +2249,7 @@
 	return len;
 }
 static struct md_sysfs_entry md_chunk_size =
-__ATTR(chunk_size, 0644, chunk_size_show, chunk_size_store);
+__ATTR(chunk_size, S_IRUGO|S_IWUSR, chunk_size_show, chunk_size_store);
 
 static ssize_t
 resync_start_show(mddev_t *mddev, char *page)
@@ -2267,7 +2273,7 @@
 	return len;
 }
 static struct md_sysfs_entry md_resync_start =
-__ATTR(resync_start, 0644, resync_start_show, resync_start_store);
+__ATTR(resync_start, S_IRUGO|S_IWUSR, resync_start_show, resync_start_store);
 
 /*
  * The array state can be:
@@ -2437,7 +2443,8 @@
 	else
 		return len;
 }
-static struct md_sysfs_entry md_array_state = __ATTR(array_state, 0644, array_state_show, array_state_store);
+static struct md_sysfs_entry md_array_state =
+__ATTR(array_state, S_IRUGO|S_IWUSR, array_state_show, array_state_store);
 
 static ssize_t
 null_show(mddev_t *mddev, char *page)
@@ -2497,7 +2504,7 @@
 }
 
 static struct md_sysfs_entry md_new_device =
-__ATTR(new_dev, 0200, null_show, new_dev_store);
+__ATTR(new_dev, S_IWUSR, null_show, new_dev_store);
 
 static ssize_t
 size_show(mddev_t *mddev, char *page)
@@ -2535,7 +2542,7 @@
 }
 
 static struct md_sysfs_entry md_size =
-__ATTR(component_size, 0644, size_show, size_store);
+__ATTR(component_size, S_IRUGO|S_IWUSR, size_show, size_store);
 
 
 /* Metdata version.
@@ -2583,7 +2590,7 @@
 }
 
 static struct md_sysfs_entry md_metadata =
-__ATTR(metadata_version, 0644, metadata_show, metadata_store);
+__ATTR(metadata_version, S_IRUGO|S_IWUSR, metadata_show, metadata_store);
 
 static ssize_t
 action_show(mddev_t *mddev, char *page)
@@ -2651,12 +2658,11 @@
 		       (unsigned long long) mddev->resync_mismatches);
 }
 
-static struct md_sysfs_entry
-md_scan_mode = __ATTR(sync_action, S_IRUGO|S_IWUSR, action_show, action_store);
+static struct md_sysfs_entry md_scan_mode =
+__ATTR(sync_action, S_IRUGO|S_IWUSR, action_show, action_store);
 
 
-static struct md_sysfs_entry
-md_mismatches = __ATTR_RO(mismatch_cnt);
+static struct md_sysfs_entry md_mismatches = __ATTR_RO(mismatch_cnt);
 
 static ssize_t
 sync_min_show(mddev_t *mddev, char *page)
@@ -2715,15 +2721,14 @@
 sync_speed_show(mddev_t *mddev, char *page)
 {
 	unsigned long resync, dt, db;
-	resync = (mddev->curr_resync - atomic_read(&mddev->recovery_active));
+	resync = (mddev->curr_mark_cnt - atomic_read(&mddev->recovery_active));
 	dt = ((jiffies - mddev->resync_mark) / HZ);
 	if (!dt) dt++;
 	db = resync - (mddev->resync_mark_cnt);
 	return sprintf(page, "%ld\n", db/dt/2); /* K/sec */
 }
 
-static struct md_sysfs_entry
-md_sync_speed = __ATTR_RO(sync_speed);
+static struct md_sysfs_entry md_sync_speed = __ATTR_RO(sync_speed);
 
 static ssize_t
 sync_completed_show(mddev_t *mddev, char *page)
@@ -2739,8 +2744,7 @@
 	return sprintf(page, "%lu / %lu\n", resync, max_blocks);
 }
 
-static struct md_sysfs_entry
-md_sync_completed = __ATTR_RO(sync_completed);
+static struct md_sysfs_entry md_sync_completed = __ATTR_RO(sync_completed);
 
 static ssize_t
 suspend_lo_show(mddev_t *mddev, char *page)
@@ -2857,6 +2861,8 @@
 
 	if (!entry->store)
 		return -EIO;
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
 	rv = mddev_lock(mddev);
 	if (!rv) {
 		rv = entry->store(mddev, page, length);
@@ -3091,7 +3097,6 @@
 		}
 	
 	set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
-	md_wakeup_thread(mddev->thread);
 	
 	if (mddev->sb_dirty)
 		md_update_sb(mddev);
@@ -3112,7 +3117,7 @@
 	 * start recovery here.  If we leave it to md_check_recovery,
 	 * it will remove the drives and not do the right thing
 	 */
-	if (mddev->degraded) {
+	if (mddev->degraded && !mddev->sync_thread) {
 		struct list_head *rtmp;
 		int spares = 0;
 		ITERATE_RDEV(mddev,rdev,rtmp)
@@ -3133,10 +3138,11 @@
 				       mdname(mddev));
 				/* leave the spares where they are, it shouldn't hurt */
 				mddev->recovery = 0;
-			} else
-				md_wakeup_thread(mddev->sync_thread);
+			}
 		}
 	}
+	md_wakeup_thread(mddev->thread);
+	md_wakeup_thread(mddev->sync_thread); /* possibly kick off a reshape */
 
 	mddev->changed = 1;
 	md_new_event(mddev);
@@ -4586,6 +4592,8 @@
 		__builtin_return_address(0),__builtin_return_address(1),
 		__builtin_return_address(2),__builtin_return_address(3));
 */
+	if (!mddev->pers)
+		return;
 	if (!mddev->pers->error_handler)
 		return;
 	mddev->pers->error_handler(mddev,rdev);
@@ -4683,12 +4691,13 @@
 	 */
 	dt = ((jiffies - mddev->resync_mark) / HZ);
 	if (!dt) dt++;
-	db = resync - (mddev->resync_mark_cnt/2);
-	rt = (dt * ((unsigned long)(max_blocks-resync) / (db/100+1)))/100;
+	db = (mddev->curr_mark_cnt - atomic_read(&mddev->recovery_active))
+		- mddev->resync_mark_cnt;
+	rt = (dt * ((unsigned long)(max_blocks-resync) / (db/2/100+1)))/100;
 
 	seq_printf(seq, " finish=%lu.%lumin", rt / 60, (rt % 60)/6);
 
-	seq_printf(seq, " speed=%ldK/sec", db/dt);
+	seq_printf(seq, " speed=%ldK/sec", db/2/dt);
 }
 
 static void *md_seq_start(struct seq_file *seq, loff_t *pos)
@@ -5199,6 +5208,7 @@
 
 		j += sectors;
 		if (j>1) mddev->curr_resync = j;
+		mddev->curr_mark_cnt = io_sectors;
 		if (last_check == 0)
 			/* this is the earliers that rebuilt will be
 			 * visible in /proc/mdstat
@@ -5645,8 +5655,8 @@
 	return -EINVAL;
 }
 
-module_param_call(start_ro, set_ro, get_ro, NULL, 0600);
-module_param(start_dirty_degraded, int, 0644);
+module_param_call(start_ro, set_ro, get_ro, NULL, S_IRUSR|S_IWUSR);
+module_param(start_dirty_degraded, int, S_IRUGO|S_IWUSR);
 
 
 EXPORT_SYMBOL(register_md_personality);
diff -urN linux-2.6.18-rc1/drivers/md/raid1.c linux-2.6.18-rc2/drivers/md/raid1.c
--- linux-2.6.18-rc1/drivers/md/raid1.c	2006-07-15 22:34:42.304967918 +0000
+++ linux-2.6.18-rc2/drivers/md/raid1.c	2006-07-15 22:34:47.561538510 +0000
@@ -1145,7 +1145,7 @@
 		long sectors_to_go = r1_bio->sectors;
 		/* make sure these bits doesn't get cleared. */
 		do {
-			bitmap_end_sync(mddev->bitmap, r1_bio->sector,
+			bitmap_end_sync(mddev->bitmap, s,
 					&sync_blocks, 1);
 			s += sync_blocks;
 			sectors_to_go -= sync_blocks;
@@ -1509,6 +1509,9 @@
 									 s<<9, conf->tmppage, READ) == 0)
 								/* Well, this device is dead */
 								md_error(mddev, rdev);
+							else
+								printk(KERN_INFO "raid1:%s: read error corrected (%d sectors at %llu on %s)\n",
+								       mdname(mddev), s, (unsigned long long)(sect + rdev->data_offset), bdevname(rdev->bdev, b));
 						}
 					}
 				} else {
diff -urN linux-2.6.18-rc1/drivers/md/raid10.c linux-2.6.18-rc2/drivers/md/raid10.c
--- linux-2.6.18-rc1/drivers/md/raid10.c	2006-07-15 22:34:42.304967918 +0000
+++ linux-2.6.18-rc2/drivers/md/raid10.c	2006-07-15 22:34:47.565538944 +0000
@@ -1492,6 +1492,10 @@
 									 s<<9, conf->tmppage, READ) == 0)
 								/* Well, this device is dead */
 								md_error(mddev, rdev);
+							else
+								printk(KERN_INFO "raid10:%s: read error corrected (%d sectors at %llu on %s)\n",
+								       mdname(mddev), s, (unsigned long long)(sect+rdev->data_offset), bdevname(rdev->bdev, b));
+
 							rdev_dec_pending(rdev, mddev);
 							rcu_read_lock();
 						}
diff -urN linux-2.6.18-rc1/drivers/md/raid5.c linux-2.6.18-rc2/drivers/md/raid5.c
--- linux-2.6.18-rc1/drivers/md/raid5.c	2006-07-15 22:34:42.308968352 +0000
+++ linux-2.6.18-rc2/drivers/md/raid5.c	2006-07-15 22:34:47.565538944 +0000
@@ -18,6 +18,30 @@
  * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+/*
+ * BITMAP UNPLUGGING:
+ *
+ * The sequencing for updating the bitmap reliably is a little
+ * subtle (and I got it wrong the first time) so it deserves some
+ * explanation.
+ *
+ * We group bitmap updates into batches.  Each batch has a number.
+ * We may write out several batches at once, but that isn't very important.
+ * conf->bm_write is the number of the last batch successfully written.
+ * conf->bm_flush is the number of the last batch that was closed to
+ *    new additions.
+ * When we discover that we will need to write to any block in a stripe
+ * (in add_stripe_bio) we update the in-memory bitmap and record in sh->bm_seq
+ * the number of the batch it will be in. This is bm_flush+1.
+ * When we are ready to do a write, if that batch hasn't been written yet,
+ *   we plug the array and queue the stripe for later.
+ * When an unplug happens, we increment bm_flush, thus closing the current
+ *   batch.
+ * When we notice that bm_flush > bm_write, we write out all pending updates
+ * to the bitmap, and advance bm_write to where bm_flush was.
+ * This may occasionally write a bit out twice, but is sure never to
+ * miss any bits.
+ */
 
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -88,12 +112,14 @@
 		BUG_ON(!list_empty(&sh->lru));
 		BUG_ON(atomic_read(&conf->active_stripes)==0);
 		if (test_bit(STRIPE_HANDLE, &sh->state)) {
-			if (test_bit(STRIPE_DELAYED, &sh->state))
+			if (test_bit(STRIPE_DELAYED, &sh->state)) {
 				list_add_tail(&sh->lru, &conf->delayed_list);
-			else if (test_bit(STRIPE_BIT_DELAY, &sh->state) &&
-				 conf->seq_write == sh->bm_seq)
+				blk_plug_device(conf->mddev->queue);
+			} else if (test_bit(STRIPE_BIT_DELAY, &sh->state) &&
+				   sh->bm_seq - conf->seq_write > 0) {
 				list_add_tail(&sh->lru, &conf->bitmap_list);
-			else {
+				blk_plug_device(conf->mddev->queue);
+			} else {
 				clear_bit(STRIPE_BIT_DELAY, &sh->state);
 				list_add_tail(&sh->lru, &conf->handle_list);
 			}
@@ -270,7 +296,7 @@
 						     < (conf->max_nr_stripes *3/4)
 						     || !conf->inactive_blocked),
 						    conf->device_lock,
-						    unplug_slaves(conf->mddev)
+						    raid5_unplug_device(conf->mddev->queue)
 					);
 				conf->inactive_blocked = 0;
 			} else
@@ -281,7 +307,8 @@
 			} else {
 				if (!test_bit(STRIPE_HANDLE, &sh->state))
 					atomic_inc(&conf->active_stripes);
-				if (list_empty(&sh->lru))
+				if (list_empty(&sh->lru) &&
+				    !test_bit(STRIPE_EXPANDING, &sh->state))
 					BUG();
 				list_del_init(&sh->lru);
 			}
@@ -496,6 +523,8 @@
 	raid5_conf_t *conf = sh->raid_conf;
 	int disks = sh->disks, i;
 	int uptodate = test_bit(BIO_UPTODATE, &bi->bi_flags);
+	char b[BDEVNAME_SIZE];
+	mdk_rdev_t *rdev;
 
 	if (bi->bi_size)
 		return 1;
@@ -543,25 +572,39 @@
 		set_bit(R5_UPTODATE, &sh->dev[i].flags);
 #endif
 		if (test_bit(R5_ReadError, &sh->dev[i].flags)) {
-			printk(KERN_INFO "raid5: read error corrected!!\n");
+			rdev = conf->disks[i].rdev;
+			printk(KERN_INFO "raid5:%s: read error corrected (%lu sectors at %llu on %s)\n",
+			       mdname(conf->mddev), STRIPE_SECTORS,
+			       (unsigned long long)sh->sector + rdev->data_offset,
+			       bdevname(rdev->bdev, b));
 			clear_bit(R5_ReadError, &sh->dev[i].flags);
 			clear_bit(R5_ReWrite, &sh->dev[i].flags);
 		}
 		if (atomic_read(&conf->disks[i].rdev->read_errors))
 			atomic_set(&conf->disks[i].rdev->read_errors, 0);
 	} else {
+		const char *bdn = bdevname(conf->disks[i].rdev->bdev, b);
 		int retry = 0;
+		rdev = conf->disks[i].rdev;
+
 		clear_bit(R5_UPTODATE, &sh->dev[i].flags);
-		atomic_inc(&conf->disks[i].rdev->read_errors);
+		atomic_inc(&rdev->read_errors);
 		if (conf->mddev->degraded)
-			printk(KERN_WARNING "raid5: read error not correctable.\n");
+			printk(KERN_WARNING "raid5:%s: read error not correctable (sector %llu on %s).\n",
+			       mdname(conf->mddev),
+			       (unsigned long long)sh->sector + rdev->data_offset,
+			       bdn);
 		else if (test_bit(R5_ReWrite, &sh->dev[i].flags))
 			/* Oh, no!!! */
-			printk(KERN_WARNING "raid5: read error NOT corrected!!\n");
-		else if (atomic_read(&conf->disks[i].rdev->read_errors)
+			printk(KERN_WARNING "raid5:%s: read error NOT corrected!! (sector %llu on %s).\n",
+			       mdname(conf->mddev),
+			       (unsigned long long)sh->sector + rdev->data_offset,
+			       bdn);
+		else if (atomic_read(&rdev->read_errors)
 			 > conf->max_nr_stripes)
 			printk(KERN_WARNING
-			       "raid5: Too many read errors, failing device.\n");
+			       "raid5:%s: Too many read errors, failing device %s.\n",
+			       mdname(conf->mddev), bdn);
 		else
 			retry = 1;
 		if (retry)
@@ -569,7 +612,7 @@
 		else {
 			clear_bit(R5_ReadError, &sh->dev[i].flags);
 			clear_bit(R5_ReWrite, &sh->dev[i].flags);
-			md_error(conf->mddev, conf->disks[i].rdev);
+			md_error(conf->mddev, rdev);
 		}
 	}
 	rdev_dec_pending(conf->disks[i].rdev, conf->mddev);
@@ -1270,9 +1313,9 @@
 		(unsigned long long)sh->sector, dd_idx);
 
 	if (conf->mddev->bitmap && firstwrite) {
-		sh->bm_seq = conf->seq_write;
 		bitmap_startwrite(conf->mddev->bitmap, sh->sector,
 				  STRIPE_SECTORS, 0);
+		sh->bm_seq = conf->seq_flush+1;
 		set_bit(STRIPE_BIT_DELAY, &sh->state);
 	}
 
@@ -2554,13 +2597,6 @@
 	return ret;
 }
 
-static inline void raid5_plug_device(raid5_conf_t *conf)
-{
-	spin_lock_irq(&conf->device_lock);
-	blk_plug_device(conf->mddev->queue);
-	spin_unlock_irq(&conf->device_lock);
-}
-
 static int make_request(request_queue_t *q, struct bio * bi)
 {
 	mddev_t *mddev = q->queuedata;
@@ -2670,7 +2706,6 @@
 				goto retry;
 			}
 			finish_wait(&conf->wait_for_overlap, &w);
-			raid5_plug_device(conf);
 			handle_stripe(sh, NULL);
 			release_stripe(sh);
 		} else {
@@ -2923,7 +2958,7 @@
 	while (1) {
 		struct list_head *first;
 
-		if (conf->seq_flush - conf->seq_write > 0) {
+		if (conf->seq_flush != conf->seq_write) {
 			int seq = conf->seq_flush;
 			spin_unlock_irq(&conf->device_lock);
 			bitmap_unplug(mddev->bitmap);
@@ -3246,9 +3281,6 @@
 		set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
 		mddev->sync_thread = md_register_thread(md_do_sync, mddev,
 							"%s_reshape");
-		/* FIXME if md_register_thread fails?? */
-		md_wakeup_thread(mddev->sync_thread);
-
 	}
 
 	/* read-ahead size must cover two whole stripes, which is
diff -urN linux-2.6.18-rc1/drivers/media/dvb/frontends/nxt200x.c linux-2.6.18-rc2/drivers/media/dvb/frontends/nxt200x.c
--- linux-2.6.18-rc1/drivers/media/dvb/frontends/nxt200x.c	2006-07-15 22:34:42.336971392 +0000
+++ linux-2.6.18-rc2/drivers/media/dvb/frontends/nxt200x.c	2006-07-15 22:34:47.597542418 +0000
@@ -896,9 +896,9 @@
 	}
 
 	ret = nxt2002_load_firmware(fe, fw);
+	release_firmware(fw);
 	if (ret) {
 		printk("nxt2002: Writing firmware to device failed\n");
-		release_firmware(fw);
 		return ret;
 	}
 	printk("nxt2002: Firmware upload complete\n");
@@ -960,9 +960,9 @@
 	}
 
 	ret = nxt2004_load_firmware(fe, fw);
+	release_firmware(fw);
 	if (ret) {
 		printk("nxt2004: Writing firmware to device failed\n");
-		release_firmware(fw);
 		return ret;
 	}
 	printk("nxt2004: Firmware upload complete\n");
diff -urN linux-2.6.18-rc1/drivers/media/dvb/frontends/or51211.c linux-2.6.18-rc2/drivers/media/dvb/frontends/or51211.c
--- linux-2.6.18-rc1/drivers/media/dvb/frontends/or51211.c	2006-07-15 22:34:42.336971392 +0000
+++ linux-2.6.18-rc2/drivers/media/dvb/frontends/or51211.c	2006-07-15 22:34:47.601542852 +0000
@@ -437,10 +437,10 @@
 		}
 
 		ret = or51211_load_firmware(fe, fw);
+		release_firmware(fw);
 		if (ret) {
 			printk(KERN_WARNING "or51211: Writing firmware to "
 			       "device failed!\n");
-			release_firmware(fw);
 			return ret;
 		}
 		printk(KERN_INFO "or51211: Firmware upload complete.\n");
diff -urN linux-2.6.18-rc1/drivers/media/dvb/frontends/sp8870.c linux-2.6.18-rc2/drivers/media/dvb/frontends/sp8870.c
--- linux-2.6.18-rc1/drivers/media/dvb/frontends/sp8870.c	2006-07-15 22:34:42.336971392 +0000
+++ linux-2.6.18-rc2/drivers/media/dvb/frontends/sp8870.c	2006-07-15 22:34:47.601542852 +0000
@@ -318,7 +318,6 @@
 	printk("sp8870: waiting for firmware upload (%s)...\n", SP8870_DEFAULT_FIRMWARE);
 	if (state->config->request_firmware(fe, &fw, SP8870_DEFAULT_FIRMWARE)) {
 		printk("sp8870: no firmware upload (timeout or file not found?)\n");
-		release_firmware(fw);
 		return -EIO;
 	}
 
@@ -327,6 +326,7 @@
 		release_firmware(fw);
 		return -EIO;
 	}
+	release_firmware(fw);
 	printk("sp8870: firmware upload complete\n");
 
 	/* enable TS output and interface pins */
diff -urN linux-2.6.18-rc1/drivers/media/dvb/frontends/sp887x.c linux-2.6.18-rc2/drivers/media/dvb/frontends/sp887x.c
--- linux-2.6.18-rc1/drivers/media/dvb/frontends/sp887x.c	2006-07-15 22:34:42.336971392 +0000
+++ linux-2.6.18-rc2/drivers/media/dvb/frontends/sp887x.c	2006-07-15 22:34:47.601542852 +0000
@@ -520,9 +520,9 @@
 		}
 
 		ret = sp887x_initial_setup(fe, fw);
+		release_firmware(fw);
 		if (ret) {
 			printk("sp887x: writing firmware to device failed\n");
-			release_firmware(fw);
 			return ret;
 		}
 		printk("sp887x: firmware upload complete\n");
diff -urN linux-2.6.18-rc1/drivers/media/video/cx88/cx88-blackbird.c linux-2.6.18-rc2/drivers/media/video/cx88/cx88-blackbird.c
--- linux-2.6.18-rc1/drivers/media/video/cx88/cx88-blackbird.c	2006-07-15 22:34:42.372975300 +0000
+++ linux-2.6.18-rc2/drivers/media/video/cx88/cx88-blackbird.c	2006-07-15 22:34:47.633546326 +0000
@@ -453,11 +453,13 @@
 	if (firmware->size != BLACKBIRD_FIRM_IMAGE_SIZE) {
 		dprintk(0, "ERROR: Firmware size mismatch (have %zd, expected %d)\n",
 			firmware->size, BLACKBIRD_FIRM_IMAGE_SIZE);
+		release_firmware(firmware);
 		return -1;
 	}
 
 	if (0 != memcmp(firmware->data, magic, 8)) {
 		dprintk(0, "ERROR: Firmware magic mismatch, wrong file?\n");
+		release_firmware(firmware);
 		return -1;
 	}
 
@@ -478,6 +480,7 @@
 	}
 	if (checksum) {
 		dprintk(0, "ERROR: Firmware load failed (checksum mismatch).\n");
+		release_firmware(firmware);
 		return -1;
 	}
 	release_firmware(firmware);
diff -urN linux-2.6.18-rc1/drivers/message/i2o/core.h linux-2.6.18-rc2/drivers/message/i2o/core.h
--- linux-2.6.18-rc1/drivers/message/i2o/core.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/message/i2o/core.h	2006-07-15 22:34:47.717555445 +0000
@@ -38,6 +38,9 @@
 extern void i2o_device_remove(struct i2o_device *);
 extern int i2o_device_parse_lct(struct i2o_controller *);
 
+int i2o_parm_issue(struct i2o_device *i2o_dev, int cmd, void *oplist,
+		   int oplen, void *reslist, int reslen);
+
 /* IOP */
 extern struct i2o_controller *i2o_iop_alloc(void);
 
diff -urN linux-2.6.18-rc1/drivers/message/i2o/i2o_config.c linux-2.6.18-rc2/drivers/message/i2o/i2o_config.c
--- linux-2.6.18-rc1/drivers/message/i2o/i2o_config.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/message/i2o/i2o_config.c	2006-07-15 22:34:47.717555445 +0000
@@ -36,9 +36,9 @@
 
 #include <asm/uaccess.h>
 
-#define SG_TABLESIZE		30
+#include "core.h"
 
-extern int i2o_parm_issue(struct i2o_device *, int, void *, int, void *, int);
+#define SG_TABLESIZE		30
 
 static int i2o_cfg_ioctl(struct inode *, struct file *, unsigned int,
 			 unsigned long);
diff -urN linux-2.6.18-rc1/drivers/mfd/ucb1x00-core.c linux-2.6.18-rc2/drivers/mfd/ucb1x00-core.c
--- linux-2.6.18-rc1/drivers/mfd/ucb1x00-core.c	2006-07-15 22:34:42.456984419 +0000
+++ linux-2.6.18-rc2/drivers/mfd/ucb1x00-core.c	2006-07-15 22:34:47.717555445 +0000
@@ -479,7 +479,7 @@
 	mcp_enable(mcp);
 	id = mcp_reg_read(mcp, UCB_ID);
 
-	if (id != UCB_ID_1200 && id != UCB_ID_1300) {
+	if (id != UCB_ID_1200 && id != UCB_ID_1300 && id != UCB_ID_TC35143) {
 		printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id);
 		goto err_disable;
 	}
diff -urN linux-2.6.18-rc1/drivers/mfd/ucb1x00.h linux-2.6.18-rc2/drivers/mfd/ucb1x00.h
--- linux-2.6.18-rc1/drivers/mfd/ucb1x00.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/mfd/ucb1x00.h	2006-07-15 22:34:47.717555445 +0000
@@ -94,6 +94,7 @@
 #define UCB_ID		0x0c
 #define UCB_ID_1200		0x1004
 #define UCB_ID_1300		0x1005
+#define UCB_ID_TC35143          0x9712
 
 #define UCB_MODE	0x0d
 #define UCB_MODE_DYN_VFLAG_ENA	(1 << 12)
diff -urN linux-2.6.18-rc1/drivers/mmc/sdhci.c linux-2.6.18-rc2/drivers/mmc/sdhci.c
--- linux-2.6.18-rc1/drivers/mmc/sdhci.c	2006-07-15 22:34:42.460984854 +0000
+++ linux-2.6.18-rc2/drivers/mmc/sdhci.c	2006-07-15 22:34:47.725556313 +0000
@@ -565,7 +565,7 @@
 	if (cmd->data)
 		flags |= SDHCI_CMD_DATA;
 
-	writel(SDHCI_MAKE_CMD(cmd->opcode, flags),
+	writew(SDHCI_MAKE_CMD(cmd->opcode, flags),
 		host->ioaddr + SDHCI_COMMAND);
 }
 
@@ -1193,10 +1193,8 @@
 	version = (version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT;
 	if (version != 0) {
 		printk(KERN_ERR "%s: Unknown controller version (%d). "
-			"Cowardly refusing to continue.\n", host->slot_descr,
+			"You may experience problems.\n", host->slot_descr,
 			version);
-		ret = -ENODEV;
-		goto unmap;
 	}
 
 	caps = readl(host->ioaddr + SDHCI_CAPABILITIES);
diff -urN linux-2.6.18-rc1/drivers/net/3c59x.c linux-2.6.18-rc2/drivers/net/3c59x.c
--- linux-2.6.18-rc1/drivers/net/3c59x.c	2006-07-15 22:34:42.508990064 +0000
+++ linux-2.6.18-rc2/drivers/net/3c59x.c	2006-07-15 22:34:47.773561524 +0000
@@ -17,172 +17,6 @@
 	410 Severn Ave., Suite 210
 	Annapolis MD 21403
 
-	Linux Kernel Additions:
-	
- 	0.99H+lk0.9 - David S. Miller - softnet, PCI DMA updates
- 	0.99H+lk1.0 - Jeff Garzik <jgarzik@pobox.com>
-		Remove compatibility defines for kernel versions < 2.2.x.
-		Update for new 2.3.x module interface
-	LK1.1.2 (March 19, 2000)
-	* New PCI interface (jgarzik)
-
-    LK1.1.3 25 April 2000, Andrew Morton <andrewm@uow.edu.au>
-    - Merged with 3c575_cb.c
-    - Don't set RxComplete in boomerang interrupt enable reg
-    - spinlock in vortex_timer to protect mdio functions
-    - disable local interrupts around call to vortex_interrupt in
-      vortex_tx_timeout() (So vortex_interrupt can use spin_lock())
-    - Select window 3 in vortex_timer()'s write to Wn3_MAC_Ctrl
-    - In vortex_start_xmit(), move the lock to _after_ we've altered
-      vp->cur_tx and vp->tx_full.  This defeats the race between
-      vortex_start_xmit() and vortex_interrupt which was identified
-      by Bogdan Costescu.
-    - Merged back support for six new cards from various sources
-    - Set vortex_have_pci if pci_module_init returns zero (fixes cardbus
-      insertion oops)
-    - Tell it that 3c905C has NWAY for 100bT autoneg
-    - Fix handling of SetStatusEnd in 'Too much work..' code, as
-      per 2.3.99's 3c575_cb (Dave Hinds).
-    - Split ISR into two for vortex & boomerang
-    - Fix MOD_INC/DEC races
-    - Handle resource allocation failures.
-    - Fix 3CCFE575CT LED polarity
-    - Make tx_interrupt_mitigation the default
-
-    LK1.1.4 25 April 2000, Andrew Morton <andrewm@uow.edu.au>    
-    - Add extra TxReset to vortex_up() to fix 575_cb hotplug initialisation probs.
-    - Put vortex_info_tbl into __devinitdata
-    - In the vortex_error StatsFull HACK, disable stats in vp->intr_enable as well
-      as in the hardware.
-    - Increased the loop counter in issue_and_wait from 2,000 to 4,000.
-
-    LK1.1.5 28 April 2000, andrewm
-    - Added powerpc defines (John Daniel <jdaniel@etresoft.com> said these work...)
-    - Some extra diagnostics
-    - In vortex_error(), reset the Tx on maxCollisions.  Otherwise most
-      chips usually get a Tx timeout.
-    - Added extra_reset module parm
-    - Replaced some inline timer manip with mod_timer
-      (Franois romieu <Francois.Romieu@nic.fr>)
-    - In vortex_up(), don't make Wn3_config initialisation dependent upon has_nway
-      (this came across from 3c575_cb).
-
-    LK1.1.6 06 Jun 2000, andrewm
-    - Backed out the PPC defines.
-    - Use del_timer_sync(), mod_timer().
-    - Fix wrapped ulong comparison in boomerang_rx()
-    - Add IS_TORNADO, use it to suppress 3c905C checksum error msg
-      (Donald Becker, I Lee Hetherington <ilh@sls.lcs.mit.edu>)
-    - Replace union wn3_config with BFINS/BFEXT manipulation for
-      sparc64 (Pete Zaitcev, Peter Jones)
-    - In vortex_error, do_tx_reset and vortex_tx_timeout(Vortex):
-      do a netif_wake_queue() to better recover from errors. (Anders Pedersen,
-      Donald Becker)
-    - Print a warning on out-of-memory (rate limited to 1 per 10 secs)
-    - Added two more Cardbus 575 NICs: 5b57 and 6564 (Paul Wagland)
-
-    LK1.1.7 2 Jul 2000 andrewm
-    - Better handling of shared IRQs
-    - Reset the transmitter on a Tx reclaim error
-    - Fixed crash under OOM during vortex_open() (Mark Hemment)
-    - Fix Rx cessation problem during OOM (help from Mark Hemment)
-    - The spinlocks around the mdio access were blocking interrupts for 300uS.
-      Fix all this to use spin_lock_bh() within mdio_read/write
-    - Only write to TxFreeThreshold if it's a boomerang - other NICs don't
-      have one.
-    - Added 802.3x MAC-layer flow control support
-
-   LK1.1.8 13 Aug 2000 andrewm
-    - Ignore request_region() return value - already reserved if Cardbus.
-    - Merged some additional Cardbus flags from Don's 0.99Qk
-    - Some fixes for 3c556 (Fred Maciel)
-    - Fix for EISA initialisation (Jan Rekorajski)
-    - Renamed MII_XCVR_PWR and EEPROM_230 to align with 3c575_cb and D. Becker's drivers
-    - Fixed MII_XCVR_PWR for 3CCFE575CT
-    - Added INVERT_LED_PWR, used it.
-    - Backed out the extra_reset stuff
-
-   LK1.1.9 12 Sep 2000 andrewm
-    - Backed out the tx_reset_resume flags.  It was a no-op.
-    - In vortex_error, don't reset the Tx on txReclaim errors
-    - In vortex_error, don't reset the Tx on maxCollisions errors.
-      Hence backed out all the DownListPtr logic here.
-    - In vortex_error, give Tornado cards a partial TxReset on
-      maxCollisions (David Hinds).  Defined MAX_COLLISION_RESET for this.
-    - Redid some driver flags and device names based on pcmcia_cs-3.1.20.
-    - Fixed a bug where, if vp->tx_full is set when the interface
-      is downed, it remains set when the interface is upped.  Bad
-      things happen.
-
-   LK1.1.10 17 Sep 2000 andrewm
-    - Added EEPROM_8BIT for 3c555 (Fred Maciel)
-    - Added experimental support for the 3c556B Laptop Hurricane (Louis Gerbarg)
-    - Add HAS_NWAY to "3c900 Cyclone 10Mbps TPO"
-
-   LK1.1.11 13 Nov 2000 andrewm
-    - Dump MOD_INC/DEC_USE_COUNT, use SET_MODULE_OWNER
-
-   LK1.1.12 1 Jan 2001 andrewm (2.4.0-pre1)
-    - Call pci_enable_device before we request our IRQ (Tobias Ringstrom)
-    - Add 3c590 PCI latency timer hack to vortex_probe1 (from 0.99Ra)
-    - Added extended issue_and_wait for the 3c905CX.
-    - Look for an MII on PHY index 24 first (3c905CX oddity).
-    - Add HAS_NWAY to 3cSOHO100-TX (Brett Frankenberger)
-    - Don't free skbs we don't own on oom path in vortex_open().
-
-   LK1.1.13 27 Jan 2001
-    - Added explicit `medialock' flag so we can truly
-      lock the media type down with `options'.
-    - "check ioremap return and some tidbits" (Arnaldo Carvalho de Melo <acme@conectiva.com.br>)
-    - Added and used EEPROM_NORESET for 3c556B PM resumes.
-    - Fixed leakage of vp->rx_ring.
-    - Break out separate HAS_HWCKSM device capability flag.
-    - Kill vp->tx_full (ANK)
-    - Merge zerocopy fragment handling (ANK?)
-
-   LK1.1.14 15 Feb 2001
-    - Enable WOL.  Can be turned on with `enable_wol' module option.
-    - EISA and PCI initialisation fixes (jgarzik, Manfred Spraul)
-    - If a device's internalconfig register reports it has NWAY,
-      use it, even if autoselect is enabled.
-
-   LK1.1.15 6 June 2001 akpm
-    - Prevent double counting of received bytes (Lars Christensen)
-    - Add ethtool support (jgarzik)
-    - Add module parm descriptions (Andrzej M. Krzysztofowicz)
-    - Implemented alloc_etherdev() API
-    - Special-case the 'Tx error 82' message.
-
-   LK1.1.16 18 July 2001 akpm
-    - Make NETIF_F_SG dependent upon nr_free_highpages(), not on CONFIG_HIGHMEM
-    - Lessen verbosity of bootup messages
-    - Fix WOL - use new PM API functions.
-    - Use netif_running() instead of vp->open in suspend/resume.
-    - Don't reset the interface logic on open/close/rmmod.  It upsets
-      autonegotiation, and hence DHCP (from 0.99T).
-    - Back out EEPROM_NORESET flag because of the above (we do it for all
-      NICs).
-    - Correct 3c982 identification string
-    - Rename wait_for_completion() to issue_and_wait() to avoid completion.h
-      clash.
-
-   LK1.1.17 18Dec01 akpm
-    - PCI ID 9805 is a Python-T, not a dual-port Cyclone.  Apparently.
-      And it has NWAY.
-    - Mask our advertised modes (vp->advertising) with our capabilities
-	  (MII reg5) when deciding which duplex mode to use.
-    - Add `global_options' as default for options[].  Ditto global_enable_wol,
-      global_full_duplex.
-
-   LK1.1.18 01Jul02 akpm
-    - Fix for undocumented transceiver power-up bit on some 3c566B's
-      (Donald Becker, Rahul Karnik)
-
-    - See http://www.zip.com.au/~akpm/linux/#3c59x-2.3 for more details.
-    - Also see Documentation/networking/vortex.txt
-
-   LK1.1.19 10Nov02 Marc Zyngier <maz@wild-wind.fr.eu.org>
-    - EISA sysfs integration.
 */
 
 /*
diff -urN linux-2.6.18-rc1/drivers/net/8139cp.c linux-2.6.18-rc2/drivers/net/8139cp.c
--- linux-2.6.18-rc1/drivers/net/8139cp.c	2006-07-15 22:34:42.508990064 +0000
+++ linux-2.6.18-rc2/drivers/net/8139cp.c	2006-07-15 22:34:47.773561524 +0000
@@ -1916,7 +1916,7 @@
 	regs = ioremap(pciaddr, CP_REGS_SIZE);
 	if (!regs) {
 		rc = -EIO;
-		dev_err(&pdev->dev, "Cannot map PCI MMIO (%lx@%lx)\n",
+		dev_err(&pdev->dev, "Cannot map PCI MMIO (%Lx@%Lx)\n",
 		       (unsigned long long)pci_resource_len(pdev, 1),
 		       (unsigned long long)pciaddr);
 		goto err_out_res;
diff -urN linux-2.6.18-rc1/drivers/net/8139too.c linux-2.6.18-rc2/drivers/net/8139too.c
--- linux-2.6.18-rc1/drivers/net/8139too.c	2006-07-15 22:34:42.508990064 +0000
+++ linux-2.6.18-rc2/drivers/net/8139too.c	2006-07-15 22:34:47.773561524 +0000
@@ -1709,6 +1709,7 @@
 	void __iomem *ioaddr = tp->mmio_addr;
 	unsigned int entry;
 	unsigned int len = skb->len;
+	unsigned long flags;
 
 	/* Calculate the next Tx descriptor entry. */
 	entry = tp->cur_tx % NUM_TX_DESC;
@@ -1725,7 +1726,7 @@
 		return 0;
 	}
 
-	spin_lock_irq(&tp->lock);
+	spin_lock_irqsave(&tp->lock, flags);
 	RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
 		   tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
 
@@ -1736,7 +1737,7 @@
 
 	if ((tp->cur_tx - NUM_TX_DESC) == tp->dirty_tx)
 		netif_stop_queue (dev);
-	spin_unlock_irq(&tp->lock);
+	spin_unlock_irqrestore(&tp->lock, flags);
 
 	if (netif_msg_tx_queued(tp))
 		printk (KERN_DEBUG "%s: Queued Tx packet size %u to slot %d.\n",
diff -urN linux-2.6.18-rc1/drivers/net/bnx2.c linux-2.6.18-rc2/drivers/net/bnx2.c
--- linux-2.6.18-rc1/drivers/net/bnx2.c	2006-07-15 22:34:42.528992236 +0000
+++ linux-2.6.18-rc2/drivers/net/bnx2.c	2006-07-15 22:34:47.793563695 +0000
@@ -1639,7 +1639,7 @@
 		skb = tx_buf->skb;
 #ifdef BCM_TSO 
 		/* partial BD completions possible with TSO packets */
-		if (skb_shinfo(skb)->gso_size) {
+		if (skb_is_gso(skb)) {
 			u16 last_idx, last_ring_idx;
 
 			last_idx = sw_cons +
diff -urN linux-2.6.18-rc1/drivers/net/chelsio/sge.c linux-2.6.18-rc2/drivers/net/chelsio/sge.c
--- linux-2.6.18-rc1/drivers/net/chelsio/sge.c	2006-07-15 22:34:42.548994407 +0000
+++ linux-2.6.18-rc2/drivers/net/chelsio/sge.c	2006-07-15 22:34:47.809565432 +0000
@@ -1417,7 +1417,7 @@
 	struct cpl_tx_pkt *cpl;
 
 #ifdef NETIF_F_TSO
-	if (skb_shinfo(skb)->gso_size) {
+	if (skb_is_gso(skb)) {
 		int eth_type;
 		struct cpl_tx_pkt_lso *hdr;
 
diff -urN linux-2.6.18-rc1/drivers/net/e1000/e1000.h linux-2.6.18-rc2/drivers/net/e1000/e1000.h
--- linux-2.6.18-rc1/drivers/net/e1000/e1000.h	2006-07-15 22:34:42.552994841 +0000
+++ linux-2.6.18-rc2/drivers/net/e1000/e1000.h	2006-07-15 22:34:47.817566301 +0000
@@ -68,7 +68,6 @@
 #ifdef NETIF_F_TSO
 #include <net/checksum.h>
 #endif
-#include <linux/workqueue.h>
 #include <linux/mii.h>
 #include <linux/ethtool.h>
 #include <linux/if_vlan.h>
@@ -143,6 +142,7 @@
 
 #define AUTO_ALL_MODES            0
 #define E1000_EEPROM_82544_APM    0x0004
+#define E1000_EEPROM_ICH8_APME    0x0004
 #define E1000_EEPROM_APME         0x0400
 
 #ifndef E1000_MASTER_SLAVE
@@ -254,7 +254,6 @@
 	spinlock_t tx_queue_lock;
 #endif
 	atomic_t irq_sem;
-	struct work_struct watchdog_task;
 	struct work_struct reset_task;
 	uint8_t fc_autoneg;
 
@@ -339,8 +338,14 @@
 #ifdef NETIF_F_TSO
 	boolean_t tso_force;
 #endif
+	boolean_t smart_power_down;	/* phy smart power down */
+	unsigned long flags;
 };
 
+enum e1000_state_t {
+	__E1000_DRIVER_TESTING,
+	__E1000_RESETTING,
+};
 
 /*  e1000_main.c  */
 extern char e1000_driver_name[];
@@ -348,6 +353,7 @@
 int e1000_up(struct e1000_adapter *adapter);
 void e1000_down(struct e1000_adapter *adapter);
 void e1000_reset(struct e1000_adapter *adapter);
+void e1000_reinit_locked(struct e1000_adapter *adapter);
 int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
 void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
 int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
diff -urN linux-2.6.18-rc1/drivers/net/e1000/e1000_ethtool.c linux-2.6.18-rc2/drivers/net/e1000/e1000_ethtool.c
--- linux-2.6.18-rc1/drivers/net/e1000/e1000_ethtool.c	2006-07-15 22:34:42.556995275 +0000
+++ linux-2.6.18-rc2/drivers/net/e1000/e1000_ethtool.c	2006-07-15 22:34:47.817566301 +0000
@@ -109,7 +109,8 @@
 		                   SUPPORTED_1000baseT_Full|
 		                   SUPPORTED_Autoneg |
 		                   SUPPORTED_TP);
-
+		if (hw->phy_type == e1000_phy_ife)
+			ecmd->supported &= ~SUPPORTED_1000baseT_Full;
 		ecmd->advertising = ADVERTISED_TP;
 
 		if (hw->autoneg == 1) {
@@ -203,11 +204,9 @@
 
 	/* reset the link */
 
-	if (netif_running(adapter->netdev)) {
-		e1000_down(adapter);
-		e1000_reset(adapter);
-		e1000_up(adapter);
-	} else
+	if (netif_running(adapter->netdev))
+		e1000_reinit_locked(adapter);
+	else
 		e1000_reset(adapter);
 
 	return 0;
@@ -254,10 +253,9 @@
 	hw->original_fc = hw->fc;
 
 	if (adapter->fc_autoneg == AUTONEG_ENABLE) {
-		if (netif_running(adapter->netdev)) {
-			e1000_down(adapter);
-			e1000_up(adapter);
-		} else
+		if (netif_running(adapter->netdev))
+			e1000_reinit_locked(adapter);
+		else
 			e1000_reset(adapter);
 	} else
 		return ((hw->media_type == e1000_media_type_fiber) ?
@@ -279,10 +277,9 @@
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	adapter->rx_csum = data;
 
-	if (netif_running(netdev)) {
-		e1000_down(adapter);
-		e1000_up(adapter);
-	} else
+	if (netif_running(netdev))
+		e1000_reinit_locked(adapter);
+	else
 		e1000_reset(adapter);
 	return 0;
 }
@@ -577,6 +574,7 @@
 	case e1000_82572:
 	case e1000_82573:
 	case e1000_80003es2lan:
+	case e1000_ich8lan:
 		sprintf(firmware_version, "%d.%d-%d",
 			(eeprom_data & 0xF000) >> 12,
 			(eeprom_data & 0x0FF0) >> 4,
@@ -631,6 +629,9 @@
 	tx_ring_size = sizeof(struct e1000_tx_ring) * adapter->num_tx_queues;
 	rx_ring_size = sizeof(struct e1000_rx_ring) * adapter->num_rx_queues;
 
+	while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+		msleep(1);
+
 	if (netif_running(adapter->netdev))
 		e1000_down(adapter);
 
@@ -691,9 +692,11 @@
 		adapter->rx_ring = rx_new;
 		adapter->tx_ring = tx_new;
 		if ((err = e1000_up(adapter)))
-			return err;
+			goto err_setup;
 	}
 
+	clear_bit(__E1000_RESETTING, &adapter->flags);
+
 	return 0;
 err_setup_tx:
 	e1000_free_all_rx_resources(adapter);
@@ -701,6 +704,8 @@
 	adapter->rx_ring = rx_old;
 	adapter->tx_ring = tx_old;
 	e1000_up(adapter);
+err_setup:
+	clear_bit(__E1000_RESETTING, &adapter->flags);
 	return err;
 }
 
@@ -754,6 +759,7 @@
 		toggle = 0x7FFFF3FF;
 		break;
 	case e1000_82573:
+	case e1000_ich8lan:
 		toggle = 0x7FFFF033;
 		break;
 	default:
@@ -773,11 +779,12 @@
 	}
 	/* restore previous status */
 	E1000_WRITE_REG(&adapter->hw, STATUS, before);
-
-	REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
-	REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF);
-	REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF);
-	REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF);
+	if (adapter->hw.mac_type != e1000_ich8lan) {
+		REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
+		REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF);
+		REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF);
+		REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF);
+	}
 	REG_PATTERN_TEST(RDTR, 0x0000FFFF, 0xFFFFFFFF);
 	REG_PATTERN_TEST(RDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
 	REG_PATTERN_TEST(RDLEN, 0x000FFF80, 0x000FFFFF);
@@ -790,20 +797,22 @@
 	REG_PATTERN_TEST(TDLEN, 0x000FFF80, 0x000FFFFF);
 
 	REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000);
-	REG_SET_AND_CHECK(RCTL, 0x06DFB3FE, 0x003FFFFB);
+	before = (adapter->hw.mac_type == e1000_ich8lan ?
+			0x06C3B33E : 0x06DFB3FE);
+	REG_SET_AND_CHECK(RCTL, before, 0x003FFFFB);
 	REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000);
 
 	if (adapter->hw.mac_type >= e1000_82543) {
 
-		REG_SET_AND_CHECK(RCTL, 0x06DFB3FE, 0xFFFFFFFF);
+		REG_SET_AND_CHECK(RCTL, before, 0xFFFFFFFF);
 		REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
-		REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF);
+		if (adapter->hw.mac_type != e1000_ich8lan)
+			REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF);
 		REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
 		REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF);
-
-		for (i = 0; i < E1000_RAR_ENTRIES; i++) {
-			REG_PATTERN_TEST(RA + ((i << 1) << 2), 0xFFFFFFFF,
-					 0xFFFFFFFF);
+		value = (adapter->hw.mac_type == e1000_ich8lan ?
+				E1000_RAR_ENTRIES_ICH8LAN : E1000_RAR_ENTRIES);
+		for (i = 0; i < value; i++) {
 			REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF,
 					 0xFFFFFFFF);
 		}
@@ -817,7 +826,9 @@
 
 	}
 
-	for (i = 0; i < E1000_MC_TBL_SIZE; i++)
+	value = (adapter->hw.mac_type == e1000_ich8lan ?
+			E1000_MC_TBL_SIZE_ICH8LAN : E1000_MC_TBL_SIZE);
+	for (i = 0; i < value; i++)
 		REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF);
 
 	*data = 0;
@@ -889,6 +900,8 @@
 	/* Test each interrupt */
 	for (; i < 10; i++) {
 
+		if (adapter->hw.mac_type == e1000_ich8lan && i == 8)
+			continue;
 		/* Interrupt to test */
 		mask = 1 << i;
 
@@ -1246,18 +1259,33 @@
 	} else if (adapter->hw.phy_type == e1000_phy_gg82563) {
 		e1000_write_phy_reg(&adapter->hw,
 		                    GG82563_PHY_KMRN_MODE_CTRL,
-		                    0x1CE);
+		                    0x1CC);
 	}
-	/* force 1000, set loopback */
-	e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x4140);
 
-	/* Now set up the MAC to the same speed/duplex as the PHY. */
 	ctrl_reg = E1000_READ_REG(&adapter->hw, CTRL);
-	ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
-	ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
-		     E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
-		     E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
-		     E1000_CTRL_FD);	 /* Force Duplex to FULL */
+
+	if (adapter->hw.phy_type == e1000_phy_ife) {
+		/* force 100, set loopback */
+		e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x6100);
+
+		/* Now set up the MAC to the same speed/duplex as the PHY. */
+		ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+		ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+			     E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+			     E1000_CTRL_SPD_100 |/* Force Speed to 100 */
+			     E1000_CTRL_FD);	 /* Force Duplex to FULL */
+	} else {
+		/* force 1000, set loopback */
+		e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x4140);
+
+		/* Now set up the MAC to the same speed/duplex as the PHY. */
+		ctrl_reg = E1000_READ_REG(&adapter->hw, CTRL);
+		ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+		ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+			     E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+			     E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
+			     E1000_CTRL_FD);	 /* Force Duplex to FULL */
+	}
 
 	if (adapter->hw.media_type == e1000_media_type_copper &&
 	   adapter->hw.phy_type == e1000_phy_m88) {
@@ -1317,6 +1345,7 @@
 	case e1000_82572:
 	case e1000_82573:
 	case e1000_80003es2lan:
+	case e1000_ich8lan:
 		return e1000_integrated_phy_loopback(adapter);
 		break;
 
@@ -1568,6 +1597,7 @@
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	boolean_t if_running = netif_running(netdev);
 
+	set_bit(__E1000_DRIVER_TESTING, &adapter->flags);
 	if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
 		/* Offline tests */
 
@@ -1582,7 +1612,8 @@
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
 		if (if_running)
-			e1000_down(adapter);
+			/* indicate we're in test mode */
+			dev_close(netdev);
 		else
 			e1000_reset(adapter);
 
@@ -1607,8 +1638,9 @@
 		adapter->hw.autoneg = autoneg;
 
 		e1000_reset(adapter);
+		clear_bit(__E1000_DRIVER_TESTING, &adapter->flags);
 		if (if_running)
-			e1000_up(adapter);
+			dev_open(netdev);
 	} else {
 		/* Online tests */
 		if (e1000_link_test(adapter, &data[4]))
@@ -1619,6 +1651,8 @@
 		data[1] = 0;
 		data[2] = 0;
 		data[3] = 0;
+
+		clear_bit(__E1000_DRIVER_TESTING, &adapter->flags);
 	}
 	msleep_interruptible(4 * 1000);
 }
@@ -1778,21 +1812,18 @@
 		mod_timer(&adapter->blink_timer, jiffies);
 		msleep_interruptible(data * 1000);
 		del_timer_sync(&adapter->blink_timer);
-	} else if (adapter->hw.mac_type < e1000_82573) {
-		E1000_WRITE_REG(&adapter->hw, LEDCTL,
-			(E1000_LEDCTL_LED2_BLINK_RATE |
-			 E1000_LEDCTL_LED0_BLINK | E1000_LEDCTL_LED2_BLINK |
-			 (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) |
-			 (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED0_MODE_SHIFT) |
-			 (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED1_MODE_SHIFT)));
+	} else if (adapter->hw.phy_type == e1000_phy_ife) {
+		if (!adapter->blink_timer.function) {
+			init_timer(&adapter->blink_timer);
+			adapter->blink_timer.function = e1000_led_blink_callback;
+			adapter->blink_timer.data = (unsigned long) adapter;
+		}
+		mod_timer(&adapter->blink_timer, jiffies);
 		msleep_interruptible(data * 1000);
+		del_timer_sync(&adapter->blink_timer);
+		e1000_write_phy_reg(&(adapter->hw), IFE_PHY_SPECIAL_CONTROL_LED, 0);
 	} else {
-		E1000_WRITE_REG(&adapter->hw, LEDCTL,
-			(E1000_LEDCTL_LED2_BLINK_RATE |
-			 E1000_LEDCTL_LED1_BLINK | E1000_LEDCTL_LED2_BLINK |
-			 (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) |
-			 (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED1_MODE_SHIFT) |
-			 (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED0_MODE_SHIFT)));
+		e1000_blink_led_start(&adapter->hw);
 		msleep_interruptible(data * 1000);
 	}
 
@@ -1807,10 +1838,8 @@
 e1000_nway_reset(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
-	if (netif_running(netdev)) {
-		e1000_down(adapter);
-		e1000_up(adapter);
-	}
+	if (netif_running(netdev))
+		e1000_reinit_locked(adapter);
 	return 0;
 }
 
diff -urN linux-2.6.18-rc1/drivers/net/e1000/e1000_hw.c linux-2.6.18-rc2/drivers/net/e1000/e1000_hw.c
--- linux-2.6.18-rc1/drivers/net/e1000/e1000_hw.c	2006-07-15 22:34:42.556995275 +0000
+++ linux-2.6.18-rc2/drivers/net/e1000/e1000_hw.c	2006-07-15 22:34:47.825567169 +0000
@@ -101,7 +101,8 @@
 
 #define E1000_WRITE_REG_IO(a, reg, val) \
 	    e1000_write_reg_io((a), E1000_##reg, val)
-static int32_t e1000_configure_kmrn_for_10_100(struct e1000_hw *hw);
+static int32_t e1000_configure_kmrn_for_10_100(struct e1000_hw *hw,
+                                               uint16_t duplex);
 static int32_t e1000_configure_kmrn_for_1000(struct e1000_hw *hw);
 
 /* IGP cable length table */
@@ -156,6 +157,14 @@
             hw->phy_type = e1000_phy_igp;
             break;
         }
+    case IGP03E1000_E_PHY_ID:
+        hw->phy_type = e1000_phy_igp_3;
+        break;
+    case IFE_E_PHY_ID:
+    case IFE_PLUS_E_PHY_ID:
+    case IFE_C_E_PHY_ID:
+        hw->phy_type = e1000_phy_ife;
+        break;
     case GG82563_E_PHY_ID:
         if (hw->mac_type == e1000_80003es2lan) {
             hw->phy_type = e1000_phy_gg82563;
@@ -332,6 +341,7 @@
         break;
     case E1000_DEV_ID_82541EI:
     case E1000_DEV_ID_82541EI_MOBILE:
+    case E1000_DEV_ID_82541ER_LOM:
         hw->mac_type = e1000_82541;
         break;
     case E1000_DEV_ID_82541ER:
@@ -341,6 +351,7 @@
         hw->mac_type = e1000_82541_rev_2;
         break;
     case E1000_DEV_ID_82547EI:
+    case E1000_DEV_ID_82547EI_MOBILE:
         hw->mac_type = e1000_82547;
         break;
     case E1000_DEV_ID_82547GI:
@@ -354,6 +365,7 @@
     case E1000_DEV_ID_82572EI_COPPER:
     case E1000_DEV_ID_82572EI_FIBER:
     case E1000_DEV_ID_82572EI_SERDES:
+    case E1000_DEV_ID_82572EI:
         hw->mac_type = e1000_82572;
         break;
     case E1000_DEV_ID_82573E:
@@ -361,16 +373,29 @@
     case E1000_DEV_ID_82573L:
         hw->mac_type = e1000_82573;
         break;
+    case E1000_DEV_ID_80003ES2LAN_COPPER_SPT:
+    case E1000_DEV_ID_80003ES2LAN_SERDES_SPT:
     case E1000_DEV_ID_80003ES2LAN_COPPER_DPT:
     case E1000_DEV_ID_80003ES2LAN_SERDES_DPT:
         hw->mac_type = e1000_80003es2lan;
         break;
+    case E1000_DEV_ID_ICH8_IGP_M_AMT:
+    case E1000_DEV_ID_ICH8_IGP_AMT:
+    case E1000_DEV_ID_ICH8_IGP_C:
+    case E1000_DEV_ID_ICH8_IFE:
+    case E1000_DEV_ID_ICH8_IGP_M:
+        hw->mac_type = e1000_ich8lan;
+        break;
     default:
         /* Should never have loaded on this device */
         return -E1000_ERR_MAC_TYPE;
     }
 
     switch(hw->mac_type) {
+    case e1000_ich8lan:
+        hw->swfwhw_semaphore_present = TRUE;
+        hw->asf_firmware_present = TRUE;
+        break;
     case e1000_80003es2lan:
         hw->swfw_sync_present = TRUE;
         /* fall through */
@@ -423,6 +448,7 @@
         case e1000_82542_rev2_1:
             hw->media_type = e1000_media_type_fiber;
             break;
+        case e1000_ich8lan:
         case e1000_82573:
             /* The STATUS_TBIMODE bit is reserved or reused for the this
              * device.
@@ -527,6 +553,14 @@
         } while(timeout);
     }
 
+    /* Workaround for ICH8 bit corruption issue in FIFO memory */
+    if (hw->mac_type == e1000_ich8lan) {
+        /* Set Tx and Rx buffer allocation to 8k apiece. */
+        E1000_WRITE_REG(hw, PBA, E1000_PBA_8K);
+        /* Set Packet Buffer Size to 16k. */
+        E1000_WRITE_REG(hw, PBS, E1000_PBS_16K);
+    }
+
     /* Issue a global reset to the MAC.  This will reset the chip's
      * transmit, receive, DMA, and link units.  It will not effect
      * the current PCI configuration.  The global reset bit is self-
@@ -550,6 +584,20 @@
             /* Reset is performed on a shadow of the control register */
             E1000_WRITE_REG(hw, CTRL_DUP, (ctrl | E1000_CTRL_RST));
             break;
+        case e1000_ich8lan:
+            if (!hw->phy_reset_disable &&
+                e1000_check_phy_reset_block(hw) == E1000_SUCCESS) {
+                /* e1000_ich8lan PHY HW reset requires MAC CORE reset
+                 * at the same time to make sure the interface between
+                 * MAC and the external PHY is reset.
+                 */
+                ctrl |= E1000_CTRL_PHY_RST;
+            }
+
+            e1000_get_software_flag(hw);
+            E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_RST));
+            msec_delay(5);
+            break;
         default:
             E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_RST));
             break;
@@ -591,6 +639,7 @@
             /* fall through */
         case e1000_82571:
         case e1000_82572:
+        case e1000_ich8lan:
         case e1000_80003es2lan:
             ret_val = e1000_get_auto_rd_done(hw);
             if(ret_val)
@@ -633,6 +682,12 @@
             e1000_pci_set_mwi(hw);
     }
 
+    if (hw->mac_type == e1000_ich8lan) {
+        uint32_t kab = E1000_READ_REG(hw, KABGTXD);
+        kab |= E1000_KABGTXD_BGSQLBIAS;
+        E1000_WRITE_REG(hw, KABGTXD, kab);
+    }
+
     return E1000_SUCCESS;
 }
 
@@ -675,9 +730,12 @@
 
     /* Disabling VLAN filtering. */
     DEBUGOUT("Initializing the IEEE VLAN\n");
-    if (hw->mac_type < e1000_82545_rev_3)
-        E1000_WRITE_REG(hw, VET, 0);
-    e1000_clear_vfta(hw);
+    /* VET hardcoded to standard value and VFTA removed in ICH8 LAN */
+    if (hw->mac_type != e1000_ich8lan) {
+        if (hw->mac_type < e1000_82545_rev_3)
+            E1000_WRITE_REG(hw, VET, 0);
+        e1000_clear_vfta(hw);
+    }
 
     /* For 82542 (rev 2.0), disable MWI and put the receiver into reset */
     if(hw->mac_type == e1000_82542_rev2_0) {
@@ -705,8 +763,14 @@
     /* Zero out the Multicast HASH table */
     DEBUGOUT("Zeroing the MTA\n");
     mta_size = E1000_MC_TBL_SIZE;
-    for(i = 0; i < mta_size; i++)
+    if (hw->mac_type == e1000_ich8lan)
+        mta_size = E1000_MC_TBL_SIZE_ICH8LAN;
+    for(i = 0; i < mta_size; i++) {
         E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
+        /* use write flush to prevent Memory Write Block (MWB) from
+         * occuring when accessing our register space */
+        E1000_WRITE_FLUSH(hw);
+    }
 
     /* Set the PCI priority bit correctly in the CTRL register.  This
      * determines if the adapter gives priority to receives, or if it
@@ -744,6 +808,10 @@
         break;
     }
 
+    /* More time needed for PHY to initialize */
+    if (hw->mac_type == e1000_ich8lan)
+        msec_delay(15);
+
     /* Call a subroutine to configure the link and setup flow control. */
     ret_val = e1000_setup_link(hw);
 
@@ -757,6 +825,7 @@
         case e1000_82571:
         case e1000_82572:
         case e1000_82573:
+        case e1000_ich8lan:
         case e1000_80003es2lan:
             ctrl |= E1000_TXDCTL_COUNT_DESC;
             break;
@@ -795,6 +864,7 @@
         /* Fall through */
     case e1000_82571:
     case e1000_82572:
+    case e1000_ich8lan:
         ctrl = E1000_READ_REG(hw, TXDCTL1);
         ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB;
         if(hw->mac_type >= e1000_82571)
@@ -818,6 +888,11 @@
      */
     e1000_clear_hw_cntrs(hw);
 
+    /* ICH8 No-snoop bits are opposite polarity.
+     * Set to snoop by default after reset. */
+    if (hw->mac_type == e1000_ich8lan)
+        e1000_set_pci_ex_no_snoop(hw, PCI_EX_82566_SNOOP_ALL);
+
     if (hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER ||
         hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3) {
         ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
@@ -905,6 +980,7 @@
      */
     if (hw->fc == e1000_fc_default) {
         switch (hw->mac_type) {
+        case e1000_ich8lan:
         case e1000_82573:
             hw->fc = e1000_fc_full;
             break;
@@ -971,9 +1047,12 @@
      */
     DEBUGOUT("Initializing the Flow Control address, type and timer regs\n");
 
-    E1000_WRITE_REG(hw, FCAL, FLOW_CONTROL_ADDRESS_LOW);
-    E1000_WRITE_REG(hw, FCAH, FLOW_CONTROL_ADDRESS_HIGH);
-    E1000_WRITE_REG(hw, FCT, FLOW_CONTROL_TYPE);
+    /* FCAL/H and FCT are hardcoded to standard values in e1000_ich8lan. */
+    if (hw->mac_type != e1000_ich8lan) {
+        E1000_WRITE_REG(hw, FCT, FLOW_CONTROL_TYPE);
+        E1000_WRITE_REG(hw, FCAH, FLOW_CONTROL_ADDRESS_HIGH);
+        E1000_WRITE_REG(hw, FCAL, FLOW_CONTROL_ADDRESS_LOW);
+    }
 
     E1000_WRITE_REG(hw, FCTTV, hw->fc_pause_time);
 
@@ -1237,12 +1316,13 @@
 
     /* Wait 10ms for MAC to configure PHY from eeprom settings */
     msec_delay(15);
-
+    if (hw->mac_type != e1000_ich8lan) {
     /* Configure activity LED after PHY reset */
     led_ctrl = E1000_READ_REG(hw, LEDCTL);
     led_ctrl &= IGP_ACTIVITY_LED_MASK;
     led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
     E1000_WRITE_REG(hw, LEDCTL, led_ctrl);
+    }
 
     /* disable lplu d3 during driver init */
     ret_val = e1000_set_d3_lplu_state(hw, FALSE);
@@ -1478,8 +1558,7 @@
             if (ret_val)
                 return ret_val;
 
-            /* Enable Pass False Carrier on the PHY */
-            phy_data |= GG82563_KMCR_PASS_FALSE_CARRIER;
+            phy_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
 
             ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,
                                           phy_data);
@@ -1561,28 +1640,40 @@
     phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
     if(hw->disable_polarity_correction == 1)
         phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
-        ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
-        if(ret_val)
-            return ret_val;
-
-    /* Force TX_CLK in the Extended PHY Specific Control Register
-     * to 25MHz clock.
-     */
-    ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
-    if(ret_val)
+    ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+    if (ret_val)
         return ret_val;
 
-    phy_data |= M88E1000_EPSCR_TX_CLK_25;
-
     if (hw->phy_revision < M88E1011_I_REV_4) {
-        /* Configure Master and Slave downshift values */
-        phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
+        /* Force TX_CLK in the Extended PHY Specific Control Register
+         * to 25MHz clock.
+         */
+        ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
+        if (ret_val)
+            return ret_val;
+
+        phy_data |= M88E1000_EPSCR_TX_CLK_25;
+
+        if ((hw->phy_revision == E1000_REVISION_2) &&
+            (hw->phy_id == M88E1111_I_PHY_ID)) {
+            /* Vidalia Phy, set the downshift counter to 5x */
+            phy_data &= ~(M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK);
+            phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
+            ret_val = e1000_write_phy_reg(hw,
+                                        M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+            if (ret_val)
+                return ret_val;
+        } else {
+            /* Configure Master and Slave downshift values */
+            phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
                               M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
-        phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
+            phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
                              M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
-        ret_val = e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
-        if(ret_val)
-            return ret_val;
+            ret_val = e1000_write_phy_reg(hw,
+                                        M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+            if (ret_val)
+               return ret_val;
+        }
     }
 
     /* SW Reset the PHY so all changes take effect */
@@ -1620,6 +1711,10 @@
     if(hw->autoneg_advertised == 0)
         hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT;
 
+    /* IFE phy only supports 10/100 */
+    if (hw->phy_type == e1000_phy_ife)
+        hw->autoneg_advertised &= AUTONEG_ADVERTISE_10_100_ALL;
+
     DEBUGOUT("Reconfiguring auto-neg advertisement params\n");
     ret_val = e1000_phy_setup_autoneg(hw);
     if(ret_val) {
@@ -1717,6 +1812,26 @@
 
     DEBUGFUNC("e1000_setup_copper_link");
 
+    switch (hw->mac_type) {
+    case e1000_80003es2lan:
+    case e1000_ich8lan:
+        /* Set the mac to wait the maximum time between each
+         * iteration and increase the max iterations when
+         * polling the phy; this fixes erroneous timeouts at 10Mbps. */
+        ret_val = e1000_write_kmrn_reg(hw, GG82563_REG(0x34, 4), 0xFFFF);
+        if (ret_val)
+            return ret_val;
+        ret_val = e1000_read_kmrn_reg(hw, GG82563_REG(0x34, 9), &reg_data);
+        if (ret_val)
+            return ret_val;
+        reg_data |= 0x3F;
+        ret_val = e1000_write_kmrn_reg(hw, GG82563_REG(0x34, 9), reg_data);
+        if (ret_val)
+            return ret_val;
+    default:
+        break;
+    }
+
     /* Check if it is a valid PHY and set PHY mode if necessary. */
     ret_val = e1000_copper_link_preconfig(hw);
     if(ret_val)
@@ -1724,10 +1839,8 @@
 
     switch (hw->mac_type) {
     case e1000_80003es2lan:
-        ret_val = e1000_read_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_INB_CTRL,
-                                      &reg_data);
-        if (ret_val)
-            return ret_val;
+        /* Kumeran registers are written-only */
+        reg_data = E1000_KUMCTRLSTA_INB_CTRL_LINK_STATUS_TX_TIMEOUT_DEFAULT;
         reg_data |= E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING;
         ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_INB_CTRL,
                                        reg_data);
@@ -1739,6 +1852,7 @@
     }
 
     if (hw->phy_type == e1000_phy_igp ||
+        hw->phy_type == e1000_phy_igp_3 ||
         hw->phy_type == e1000_phy_igp_2) {
         ret_val = e1000_copper_link_igp_setup(hw);
         if(ret_val)
@@ -1803,7 +1917,7 @@
 * hw - Struct containing variables accessed by shared code
 ******************************************************************************/
 static int32_t
-e1000_configure_kmrn_for_10_100(struct e1000_hw *hw)
+e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, uint16_t duplex)
 {
     int32_t ret_val = E1000_SUCCESS;
     uint32_t tipg;
@@ -1823,6 +1937,18 @@
     tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_10_100;
     E1000_WRITE_REG(hw, TIPG, tipg);
 
+    ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data);
+
+    if (ret_val)
+        return ret_val;
+
+    if (duplex == HALF_DUPLEX)
+        reg_data |= GG82563_KMCR_PASS_FALSE_CARRIER;
+    else
+        reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
+
+    ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
+
     return ret_val;
 }
 
@@ -1847,6 +1973,14 @@
     tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_1000;
     E1000_WRITE_REG(hw, TIPG, tipg);
 
+    ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data);
+
+    if (ret_val)
+        return ret_val;
+
+    reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
+    ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
+
     return ret_val;
 }
 
@@ -1869,10 +2003,13 @@
     if(ret_val)
         return ret_val;
 
-    /* Read the MII 1000Base-T Control Register (Address 9). */
-    ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg);
-    if(ret_val)
-        return ret_val;
+    if (hw->phy_type != e1000_phy_ife) {
+        /* Read the MII 1000Base-T Control Register (Address 9). */
+        ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg);
+        if (ret_val)
+            return ret_val;
+    } else
+        mii_1000t_ctrl_reg=0;
 
     /* Need to parse both autoneg_advertised and fc and set up
      * the appropriate PHY registers.  First we will parse for
@@ -1923,6 +2060,9 @@
     if(hw->autoneg_advertised & ADVERTISE_1000_FULL) {
         DEBUGOUT("Advertise 1000mb Full duplex\n");
         mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
+        if (hw->phy_type == e1000_phy_ife) {
+            DEBUGOUT("e1000_phy_ife is a 10/100 PHY. Gigabit speed is not supported.\n");
+        }
     }
 
     /* Check for a software override of the flow control settings, and
@@ -1984,9 +2124,11 @@
 
     DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
 
-    ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
-    if(ret_val)
-        return ret_val;
+    if (hw->phy_type != e1000_phy_ife) {
+        ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
+        if (ret_val)
+            return ret_val;
+    }
 
     return E1000_SUCCESS;
 }
@@ -2089,6 +2231,18 @@
 
         /* Need to reset the PHY or these changes will be ignored */
         mii_ctrl_reg |= MII_CR_RESET;
+    /* Disable MDI-X support for 10/100 */
+    } else if (hw->phy_type == e1000_phy_ife) {
+        ret_val = e1000_read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, &phy_data);
+        if (ret_val)
+            return ret_val;
+
+        phy_data &= ~IFE_PMC_AUTO_MDIX;
+        phy_data &= ~IFE_PMC_FORCE_MDIX;
+
+        ret_val = e1000_write_phy_reg(hw, IFE_PHY_MDIX_CONTROL, phy_data);
+        if (ret_val)
+            return ret_val;
     } else {
         /* Clear Auto-Crossover to force MDI manually.  IGP requires MDI
          * forced whenever speed or duplex are forced.
@@ -2721,8 +2875,12 @@
          */
         if(hw->tbi_compatibility_en) {
             uint16_t speed, duplex;
-            e1000_get_speed_and_duplex(hw, &speed, &duplex);
-            if(speed != SPEED_1000) {
+            ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
+            if (ret_val) {
+                DEBUGOUT("Error getting link speed and duplex\n");
+                return ret_val;
+            }
+            if (speed != SPEED_1000) {
                 /* If link speed is not set to gigabit speed, we do not need
                  * to enable TBI compatibility.
                  */
@@ -2889,7 +3047,13 @@
         if (*speed == SPEED_1000)
             ret_val = e1000_configure_kmrn_for_1000(hw);
         else
-            ret_val = e1000_configure_kmrn_for_10_100(hw);
+            ret_val = e1000_configure_kmrn_for_10_100(hw, *duplex);
+        if (ret_val)
+            return ret_val;
+    }
+
+    if ((hw->phy_type == e1000_phy_igp_3) && (*speed == SPEED_1000)) {
+        ret_val = e1000_kumeran_lock_loss_workaround(hw);
         if (ret_val)
             return ret_val;
     }
@@ -3079,6 +3243,9 @@
 
     DEBUGFUNC("e1000_swfw_sync_acquire");
 
+    if (hw->swfwhw_semaphore_present)
+        return e1000_get_software_flag(hw);
+
     if (!hw->swfw_sync_present)
         return e1000_get_hw_eeprom_semaphore(hw);
 
@@ -3118,6 +3285,11 @@
 
     DEBUGFUNC("e1000_swfw_sync_release");
 
+    if (hw->swfwhw_semaphore_present) {
+        e1000_release_software_flag(hw);
+        return;
+    }
+
     if (!hw->swfw_sync_present) {
         e1000_put_hw_eeprom_semaphore(hw);
         return;
@@ -3160,7 +3332,8 @@
     if (e1000_swfw_sync_acquire(hw, swfw))
         return -E1000_ERR_SWFW_SYNC;
 
-    if((hw->phy_type == e1000_phy_igp ||
+    if ((hw->phy_type == e1000_phy_igp ||
+        hw->phy_type == e1000_phy_igp_3 ||
         hw->phy_type == e1000_phy_igp_2) &&
        (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
         ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
@@ -3299,7 +3472,8 @@
     if (e1000_swfw_sync_acquire(hw, swfw))
         return -E1000_ERR_SWFW_SYNC;
 
-    if((hw->phy_type == e1000_phy_igp ||
+    if ((hw->phy_type == e1000_phy_igp ||
+        hw->phy_type == e1000_phy_igp_3 ||
         hw->phy_type == e1000_phy_igp_2) &&
        (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
         ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
@@ -3514,7 +3688,7 @@
         E1000_WRITE_FLUSH(hw);
 
         if (hw->mac_type >= e1000_82571)
-            msec_delay(10);
+            msec_delay_irq(10);
         e1000_swfw_sync_release(hw, swfw);
     } else {
         /* Read the Extended Device Control Register, assert the PHY_RESET_DIR
@@ -3544,6 +3718,12 @@
     ret_val = e1000_get_phy_cfg_done(hw);
     e1000_release_software_semaphore(hw);
 
+        if ((hw->mac_type == e1000_ich8lan) &&
+            (hw->phy_type == e1000_phy_igp_3)) {
+            ret_val = e1000_init_lcd_from_nvm(hw);
+            if (ret_val)
+                return ret_val;
+        }
     return ret_val;
 }
 
@@ -3572,9 +3752,11 @@
     case e1000_82541_rev_2:
     case e1000_82571:
     case e1000_82572:
+    case e1000_ich8lan:
         ret_val = e1000_phy_hw_reset(hw);
         if(ret_val)
             return ret_val;
+
         break;
     default:
         ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
@@ -3597,11 +3779,120 @@
 }
 
 /******************************************************************************
+* Work-around for 82566 power-down: on D3 entry-
+* 1) disable gigabit link
+* 2) write VR power-down enable
+* 3) read it back
+* if successful continue, else issue LCD reset and repeat
+*
+* hw - struct containing variables accessed by shared code
+******************************************************************************/
+void
+e1000_phy_powerdown_workaround(struct e1000_hw *hw)
+{
+    int32_t reg;
+    uint16_t phy_data;
+    int32_t retry = 0;
+
+    DEBUGFUNC("e1000_phy_powerdown_workaround");
+
+    if (hw->phy_type != e1000_phy_igp_3)
+        return;
+
+    do {
+        /* Disable link */
+        reg = E1000_READ_REG(hw, PHY_CTRL);
+        E1000_WRITE_REG(hw, PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE |
+                        E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
+
+        /* Write VR power-down enable */
+        e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data);
+        e1000_write_phy_reg(hw, IGP3_VR_CTRL, phy_data |
+                            IGP3_VR_CTRL_MODE_SHUT);
+
+        /* Read it back and test */
+        e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data);
+        if ((phy_data & IGP3_VR_CTRL_MODE_SHUT) || retry)
+            break;
+
+        /* Issue PHY reset and repeat at most one more time */
+        reg = E1000_READ_REG(hw, CTRL);
+        E1000_WRITE_REG(hw, CTRL, reg | E1000_CTRL_PHY_RST);
+        retry++;
+    } while (retry);
+
+    return;
+
+}
+
+/******************************************************************************
+* Work-around for 82566 Kumeran PCS lock loss:
+* On link status change (i.e. PCI reset, speed change) and link is up and
+* speed is gigabit-
+* 0) if workaround is optionally disabled do nothing
+* 1) wait 1ms for Kumeran link to come up
+* 2) check Kumeran Diagnostic register PCS lock loss bit
+* 3) if not set the link is locked (all is good), otherwise...
+* 4) reset the PHY
+* 5) repeat up to 10 times
+* Note: this is only called for IGP3 copper when speed is 1gb.
+*
+* hw - struct containing variables accessed by shared code
+******************************************************************************/
+int32_t
+e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw)
+{
+    int32_t ret_val;
+    int32_t reg;
+    int32_t cnt;
+    uint16_t phy_data;
+
+    if (hw->kmrn_lock_loss_workaround_disabled)
+        return E1000_SUCCESS;
+
+    /* Make sure link is up before proceeding. If not just return.
+     * Attempting this while link is negotiating fouls up link
+     * stability */
+    ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+    ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+
+    if (phy_data & MII_SR_LINK_STATUS) {
+        for (cnt = 0; cnt < 10; cnt++) {
+            /* read once to clear */
+            ret_val = e1000_read_phy_reg(hw, IGP3_KMRN_DIAG, &phy_data);
+            if (ret_val)
+                return ret_val;
+            /* and again to get new status */
+            ret_val = e1000_read_phy_reg(hw, IGP3_KMRN_DIAG, &phy_data);
+            if (ret_val)
+                return ret_val;
+
+            /* check for PCS lock */
+            if (!(phy_data & IGP3_KMRN_DIAG_PCS_LOCK_LOSS))
+                return E1000_SUCCESS;
+
+            /* Issue PHY reset */
+            e1000_phy_hw_reset(hw);
+            msec_delay_irq(5);
+        }
+        /* Disable GigE link negotiation */
+        reg = E1000_READ_REG(hw, PHY_CTRL);
+        E1000_WRITE_REG(hw, PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE |
+                        E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
+
+        /* unable to acquire PCS lock */
+        return E1000_ERR_PHY;
+    }
+
+    return E1000_SUCCESS;
+}
+
+/******************************************************************************
 * Probes the expected PHY address for known PHY IDs
 *
 * hw - Struct containing variables accessed by shared code
 ******************************************************************************/
-static int32_t
+int32_t
 e1000_detect_gig_phy(struct e1000_hw *hw)
 {
     int32_t phy_init_status, ret_val;
@@ -3613,8 +3904,8 @@
     /* The 82571 firmware may still be configuring the PHY.  In this
      * case, we cannot access the PHY until the configuration is done.  So
      * we explicitly set the PHY values. */
-    if(hw->mac_type == e1000_82571 ||
-       hw->mac_type == e1000_82572) {
+    if (hw->mac_type == e1000_82571 ||
+        hw->mac_type == e1000_82572) {
         hw->phy_id = IGP01E1000_I_PHY_ID;
         hw->phy_type = e1000_phy_igp_2;
         return E1000_SUCCESS;
@@ -3631,7 +3922,7 @@
 
     /* Read the PHY ID Registers to identify which PHY is onboard. */
     ret_val = e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high);
-    if(ret_val)
+    if (ret_val)
         return ret_val;
 
     hw->phy_id = (uint32_t) (phy_id_high << 16);
@@ -3669,6 +3960,12 @@
     case e1000_80003es2lan:
         if (hw->phy_id == GG82563_E_PHY_ID) match = TRUE;
         break;
+    case e1000_ich8lan:
+        if (hw->phy_id == IGP03E1000_E_PHY_ID) match = TRUE;
+        if (hw->phy_id == IFE_E_PHY_ID) match = TRUE;
+        if (hw->phy_id == IFE_PLUS_E_PHY_ID) match = TRUE;
+        if (hw->phy_id == IFE_C_E_PHY_ID) match = TRUE;
+        break;
     default:
         DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type);
         return -E1000_ERR_CONFIG;
@@ -3784,6 +4081,53 @@
 }
 
 /******************************************************************************
+* Get PHY information from various PHY registers for ife PHY only.
+*
+* hw - Struct containing variables accessed by shared code
+* phy_info - PHY information structure
+******************************************************************************/
+int32_t
+e1000_phy_ife_get_info(struct e1000_hw *hw,
+                       struct e1000_phy_info *phy_info)
+{
+    int32_t ret_val;
+    uint16_t phy_data, polarity;
+
+    DEBUGFUNC("e1000_phy_ife_get_info");
+
+    phy_info->downshift = (e1000_downshift)hw->speed_downgraded;
+    phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal;
+
+    ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data);
+    if (ret_val)
+        return ret_val;
+    phy_info->polarity_correction =
+                        (phy_data & IFE_PSC_AUTO_POLARITY_DISABLE) >>
+                        IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT;
+
+    if (phy_info->polarity_correction == e1000_polarity_reversal_enabled) {
+        ret_val = e1000_check_polarity(hw, &polarity);
+        if (ret_val)
+            return ret_val;
+    } else {
+        /* Polarity is forced. */
+        polarity = (phy_data & IFE_PSC_FORCE_POLARITY) >>
+                       IFE_PSC_FORCE_POLARITY_SHIFT;
+    }
+    phy_info->cable_polarity = polarity;
+
+    ret_val = e1000_read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, &phy_data);
+    if (ret_val)
+        return ret_val;
+
+    phy_info->mdix_mode =
+                     (phy_data & (IFE_PMC_AUTO_MDIX | IFE_PMC_FORCE_MDIX)) >>
+                     IFE_PMC_MDIX_MODE_SHIFT;
+
+    return E1000_SUCCESS;
+}
+
+/******************************************************************************
 * Get PHY information from various PHY registers fot m88 PHY only.
 *
 * hw - Struct containing variables accessed by shared code
@@ -3898,9 +4242,12 @@
         return -E1000_ERR_CONFIG;
     }
 
-    if(hw->phy_type == e1000_phy_igp ||
+    if (hw->phy_type == e1000_phy_igp ||
+        hw->phy_type == e1000_phy_igp_3 ||
         hw->phy_type == e1000_phy_igp_2)
         return e1000_phy_igp_get_info(hw, phy_info);
+    else if (hw->phy_type == e1000_phy_ife)
+        return e1000_phy_ife_get_info(hw, phy_info);
     else
         return e1000_phy_m88_get_info(hw, phy_info);
 }
@@ -4049,6 +4396,35 @@
         eeprom->use_eerd = TRUE;
         eeprom->use_eewr = FALSE;
         break;
+    case e1000_ich8lan:
+    {
+        int32_t  i = 0;
+        uint32_t flash_size = E1000_READ_ICH8_REG(hw, ICH8_FLASH_GFPREG);
+
+        eeprom->type = e1000_eeprom_ich8;
+        eeprom->use_eerd = FALSE;
+        eeprom->use_eewr = FALSE;
+        eeprom->word_size = E1000_SHADOW_RAM_WORDS;
+
+        /* Zero the shadow RAM structure. But don't load it from NVM
+         * so as to save time for driver init */
+        if (hw->eeprom_shadow_ram != NULL) {
+            for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) {
+                hw->eeprom_shadow_ram[i].modified = FALSE;
+                hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF;
+            }
+        }
+
+        hw->flash_base_addr = (flash_size & ICH8_GFPREG_BASE_MASK) *
+                              ICH8_FLASH_SECTOR_SIZE;
+
+        hw->flash_bank_size = ((flash_size >> 16) & ICH8_GFPREG_BASE_MASK) + 1;
+        hw->flash_bank_size -= (flash_size & ICH8_GFPREG_BASE_MASK);
+        hw->flash_bank_size *= ICH8_FLASH_SECTOR_SIZE;
+        hw->flash_bank_size /= 2 * sizeof(uint16_t);
+
+        break;
+    }
     default:
         break;
     }
@@ -4469,7 +4845,10 @@
         return ret_val;
     }
 
-    if(eeprom->type == e1000_eeprom_spi) {
+    if (eeprom->type == e1000_eeprom_ich8)
+        return e1000_read_eeprom_ich8(hw, offset, words, data);
+
+    if (eeprom->type == e1000_eeprom_spi) {
         uint16_t word_in;
         uint8_t read_opcode = EEPROM_READ_OPCODE_SPI;
 
@@ -4636,7 +5015,10 @@
 
     DEBUGFUNC("e1000_is_onboard_nvm_eeprom");
 
-    if(hw->mac_type == e1000_82573) {
+    if (hw->mac_type == e1000_ich8lan)
+        return FALSE;
+
+    if (hw->mac_type == e1000_82573) {
         eecd = E1000_READ_REG(hw, EECD);
 
         /* Isolate bits 15 & 16 */
@@ -4686,8 +5068,22 @@
         }
     }
 
-    for(i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
-        if(e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
+    if (hw->mac_type == e1000_ich8lan) {
+        /* Drivers must allocate the shadow ram structure for the
+         * EEPROM checksum to be updated.  Otherwise, this bit as well
+         * as the checksum must both be set correctly for this
+         * validation to pass.
+         */
+        e1000_read_eeprom(hw, 0x19, 1, &eeprom_data);
+        if ((eeprom_data & 0x40) == 0) {
+            eeprom_data |= 0x40;
+            e1000_write_eeprom(hw, 0x19, 1, &eeprom_data);
+            e1000_update_eeprom_checksum(hw);
+        }
+    }
+
+    for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
+        if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
             DEBUGOUT("EEPROM Read Error\n");
             return -E1000_ERR_EEPROM;
         }
@@ -4713,6 +5109,7 @@
 int32_t
 e1000_update_eeprom_checksum(struct e1000_hw *hw)
 {
+    uint32_t ctrl_ext;
     uint16_t checksum = 0;
     uint16_t i, eeprom_data;
 
@@ -4731,6 +5128,14 @@
         return -E1000_ERR_EEPROM;
     } else if (hw->eeprom.type == e1000_eeprom_flash) {
         e1000_commit_shadow_ram(hw);
+    } else if (hw->eeprom.type == e1000_eeprom_ich8) {
+        e1000_commit_shadow_ram(hw);
+        /* Reload the EEPROM, or else modifications will not appear
+         * until after next adapter reset. */
+        ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+        ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+        E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
+        msec_delay(10);
     }
     return E1000_SUCCESS;
 }
@@ -4770,6 +5175,9 @@
     if(eeprom->use_eewr == TRUE)
         return e1000_write_eeprom_eewr(hw, offset, words, data);
 
+    if (eeprom->type == e1000_eeprom_ich8)
+        return e1000_write_eeprom_ich8(hw, offset, words, data);
+
     /* Prepare the EEPROM for writing  */
     if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
         return -E1000_ERR_EEPROM;
@@ -4957,11 +5365,17 @@
     uint32_t flop = 0;
     uint32_t i = 0;
     int32_t error = E1000_SUCCESS;
-
-    /* The flop register will be used to determine if flash type is STM */
-    flop = E1000_READ_REG(hw, FLOP);
+    uint32_t old_bank_offset = 0;
+    uint32_t new_bank_offset = 0;
+    uint32_t sector_retries = 0;
+    uint8_t low_byte = 0;
+    uint8_t high_byte = 0;
+    uint8_t temp_byte = 0;
+    boolean_t sector_write_failed = FALSE;
 
     if (hw->mac_type == e1000_82573) {
+        /* The flop register will be used to determine if flash type is STM */
+        flop = E1000_READ_REG(hw, FLOP);
         for (i=0; i < attempts; i++) {
             eecd = E1000_READ_REG(hw, EECD);
             if ((eecd & E1000_EECD_FLUPD) == 0) {
@@ -4995,6 +5409,106 @@
         }
     }
 
+    if (hw->mac_type == e1000_ich8lan && hw->eeprom_shadow_ram != NULL) {
+        /* We're writing to the opposite bank so if we're on bank 1,
+         * write to bank 0 etc.  We also need to erase the segment that
+         * is going to be written */
+        if (!(E1000_READ_REG(hw, EECD) & E1000_EECD_SEC1VAL)) {
+            new_bank_offset = hw->flash_bank_size * 2;
+            old_bank_offset = 0;
+            e1000_erase_ich8_4k_segment(hw, 1);
+        } else {
+            old_bank_offset = hw->flash_bank_size * 2;
+            new_bank_offset = 0;
+            e1000_erase_ich8_4k_segment(hw, 0);
+        }
+
+        do {
+            sector_write_failed = FALSE;
+            /* Loop for every byte in the shadow RAM,
+             * which is in units of words. */
+            for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) {
+                /* Determine whether to write the value stored
+                 * in the other NVM bank or a modified value stored
+                 * in the shadow RAM */
+                if (hw->eeprom_shadow_ram[i].modified == TRUE) {
+                    low_byte = (uint8_t)hw->eeprom_shadow_ram[i].eeprom_word;
+                    e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset,
+                                         &temp_byte);
+                    udelay(100);
+                    error = e1000_verify_write_ich8_byte(hw,
+                                                 (i << 1) + new_bank_offset,
+                                                 low_byte);
+                    if (error != E1000_SUCCESS)
+                        sector_write_failed = TRUE;
+                    high_byte =
+                        (uint8_t)(hw->eeprom_shadow_ram[i].eeprom_word >> 8);
+                    e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset + 1,
+                                         &temp_byte);
+                    udelay(100);
+                } else {
+                    e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset,
+                                         &low_byte);
+                    udelay(100);
+                    error = e1000_verify_write_ich8_byte(hw,
+                                 (i << 1) + new_bank_offset, low_byte);
+                    if (error != E1000_SUCCESS)
+                        sector_write_failed = TRUE;
+                    e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset + 1,
+                                         &high_byte);
+                }
+
+                /* If the word is 0x13, then make sure the signature bits
+                 * (15:14) are 11b until the commit has completed.
+                 * This will allow us to write 10b which indicates the
+                 * signature is valid.  We want to do this after the write
+                 * has completed so that we don't mark the segment valid
+                 * while the write is still in progress */
+                if (i == E1000_ICH8_NVM_SIG_WORD)
+                    high_byte = E1000_ICH8_NVM_SIG_MASK | high_byte;
+
+                error = e1000_verify_write_ich8_byte(hw,
+                             (i << 1) + new_bank_offset + 1, high_byte);
+                if (error != E1000_SUCCESS)
+                    sector_write_failed = TRUE;
+
+                if (sector_write_failed == FALSE) {
+                    /* Clear the now not used entry in the cache */
+                    hw->eeprom_shadow_ram[i].modified = FALSE;
+                    hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF;
+                }
+            }
+
+            /* Don't bother writing the segment valid bits if sector
+             * programming failed. */
+            if (sector_write_failed == FALSE) {
+                /* Finally validate the new segment by setting bit 15:14
+                 * to 10b in word 0x13 , this can be done without an
+                 * erase as well since these bits are 11 to start with
+                 * and we need to change bit 14 to 0b */
+                e1000_read_ich8_byte(hw,
+                    E1000_ICH8_NVM_SIG_WORD * 2 + 1 + new_bank_offset,
+                    &high_byte);
+                high_byte &= 0xBF;
+                error = e1000_verify_write_ich8_byte(hw,
+                            E1000_ICH8_NVM_SIG_WORD * 2 + 1 + new_bank_offset,
+                            high_byte);
+                if (error != E1000_SUCCESS)
+                    sector_write_failed = TRUE;
+
+                /* And invalidate the previously valid segment by setting
+                 * its signature word (0x13) high_byte to 0b. This can be
+                 * done without an erase because flash erase sets all bits
+                 * to 1's. We can write 1's to 0's without an erase */
+                error = e1000_verify_write_ich8_byte(hw,
+                            E1000_ICH8_NVM_SIG_WORD * 2 + 1 + old_bank_offset,
+                            0);
+                if (error != E1000_SUCCESS)
+                    sector_write_failed = TRUE;
+            }
+        } while (++sector_retries < 10 && sector_write_failed == TRUE);
+    }
+
     return error;
 }
 
@@ -5102,15 +5616,19 @@
      * the other port. */
     if ((hw->mac_type == e1000_82571) && (hw->laa_is_present == TRUE))
         rar_num -= 1;
+    if (hw->mac_type == e1000_ich8lan)
+        rar_num = E1000_RAR_ENTRIES_ICH8LAN;
+
     /* Zero out the other 15 receive addresses. */
     DEBUGOUT("Clearing RAR[1-15]\n");
     for(i = 1; i < rar_num; i++) {
         E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
+        E1000_WRITE_FLUSH(hw);
         E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
+        E1000_WRITE_FLUSH(hw);
     }
 }
 
-#if 0
 /******************************************************************************
  * Updates the MAC's list of multicast addresses.
  *
@@ -5145,6 +5663,8 @@
     /* Clear RAR[1-15] */
     DEBUGOUT(" Clearing RAR[1-15]\n");
     num_rar_entry = E1000_RAR_ENTRIES;
+    if (hw->mac_type == e1000_ich8lan)
+        num_rar_entry = E1000_RAR_ENTRIES_ICH8LAN;
     /* Reserve a spot for the Locally Administered Address to work around
      * an 82571 issue in which a reset on one port will reload the MAC on
      * the other port. */
@@ -5153,14 +5673,19 @@
 
     for(i = rar_used_count; i < num_rar_entry; i++) {
         E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
+        E1000_WRITE_FLUSH(hw);
         E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
+        E1000_WRITE_FLUSH(hw);
     }
 
     /* Clear the MTA */
     DEBUGOUT(" Clearing MTA\n");
     num_mta_entry = E1000_NUM_MTA_REGISTERS;
+    if (hw->mac_type == e1000_ich8lan)
+        num_mta_entry = E1000_NUM_MTA_REGISTERS_ICH8LAN;
     for(i = 0; i < num_mta_entry; i++) {
         E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
+        E1000_WRITE_FLUSH(hw);
     }
 
     /* Add the new addresses */
@@ -5194,7 +5719,6 @@
     }
     DEBUGOUT("MC Update Complete\n");
 }
-#endif  /*  0  */
 
 /******************************************************************************
  * Hashes an address to determine its location in the multicast table
@@ -5217,24 +5741,46 @@
      * LSB                 MSB
      */
     case 0:
-        /* [47:36] i.e. 0x563 for above example address */
-        hash_value = ((mc_addr[4] >> 4) | (((uint16_t) mc_addr[5]) << 4));
+        if (hw->mac_type == e1000_ich8lan) {
+            /* [47:38] i.e. 0x158 for above example address */
+            hash_value = ((mc_addr[4] >> 6) | (((uint16_t) mc_addr[5]) << 2));
+        } else {
+            /* [47:36] i.e. 0x563 for above example address */
+            hash_value = ((mc_addr[4] >> 4) | (((uint16_t) mc_addr[5]) << 4));
+        }
         break;
     case 1:
-        /* [46:35] i.e. 0xAC6 for above example address */
-        hash_value = ((mc_addr[4] >> 3) | (((uint16_t) mc_addr[5]) << 5));
+        if (hw->mac_type == e1000_ich8lan) {
+            /* [46:37] i.e. 0x2B1 for above example address */
+            hash_value = ((mc_addr[4] >> 5) | (((uint16_t) mc_addr[5]) << 3));
+        } else {
+            /* [46:35] i.e. 0xAC6 for above example address */
+            hash_value = ((mc_addr[4] >> 3) | (((uint16_t) mc_addr[5]) << 5));
+        }
         break;
     case 2:
-        /* [45:34] i.e. 0x5D8 for above example address */
-        hash_value = ((mc_addr[4] >> 2) | (((uint16_t) mc_addr[5]) << 6));
+        if (hw->mac_type == e1000_ich8lan) {
+            /*[45:36] i.e. 0x163 for above example address */
+            hash_value = ((mc_addr[4] >> 4) | (((uint16_t) mc_addr[5]) << 4));
+        } else {
+            /* [45:34] i.e. 0x5D8 for above example address */
+            hash_value = ((mc_addr[4] >> 2) | (((uint16_t) mc_addr[5]) << 6));
+        }
         break;
     case 3:
-        /* [43:32] i.e. 0x634 for above example address */
-        hash_value = ((mc_addr[4]) | (((uint16_t) mc_addr[5]) << 8));
+        if (hw->mac_type == e1000_ich8lan) {
+            /* [43:34] i.e. 0x18D for above example address */
+            hash_value = ((mc_addr[4] >> 2) | (((uint16_t) mc_addr[5]) << 6));
+        } else {
+            /* [43:32] i.e. 0x634 for above example address */
+            hash_value = ((mc_addr[4]) | (((uint16_t) mc_addr[5]) << 8));
+        }
         break;
     }
 
     hash_value &= 0xFFF;
+    if (hw->mac_type == e1000_ich8lan)
+        hash_value &= 0x3FF;
 
     return hash_value;
 }
@@ -5262,6 +5808,8 @@
      * register are determined by the lower 5 bits of the value.
      */
     hash_reg = (hash_value >> 5) & 0x7F;
+    if (hw->mac_type == e1000_ich8lan)
+        hash_reg &= 0x1F;
     hash_bit = hash_value & 0x1F;
 
     mta = E1000_READ_REG_ARRAY(hw, MTA, hash_reg);
@@ -5275,9 +5823,12 @@
     if((hw->mac_type == e1000_82544) && ((hash_reg & 0x1) == 1)) {
         temp = E1000_READ_REG_ARRAY(hw, MTA, (hash_reg - 1));
         E1000_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta);
+        E1000_WRITE_FLUSH(hw);
         E1000_WRITE_REG_ARRAY(hw, MTA, (hash_reg - 1), temp);
+        E1000_WRITE_FLUSH(hw);
     } else {
         E1000_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta);
+        E1000_WRITE_FLUSH(hw);
     }
 }
 
@@ -5334,7 +5885,9 @@
     }
 
     E1000_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low);
+    E1000_WRITE_FLUSH(hw);
     E1000_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high);
+    E1000_WRITE_FLUSH(hw);
 }
 
 /******************************************************************************
@@ -5351,12 +5904,18 @@
 {
     uint32_t temp;
 
-    if((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) {
+    if (hw->mac_type == e1000_ich8lan)
+        return;
+
+    if ((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) {
         temp = E1000_READ_REG_ARRAY(hw, VFTA, (offset - 1));
         E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
+        E1000_WRITE_FLUSH(hw);
         E1000_WRITE_REG_ARRAY(hw, VFTA, (offset - 1), temp);
+        E1000_WRITE_FLUSH(hw);
     } else {
         E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
+        E1000_WRITE_FLUSH(hw);
     }
 }
 
@@ -5373,6 +5932,9 @@
     uint32_t vfta_offset = 0;
     uint32_t vfta_bit_in_reg = 0;
 
+    if (hw->mac_type == e1000_ich8lan)
+        return;
+
     if (hw->mac_type == e1000_82573) {
         if (hw->mng_cookie.vlan_id != 0) {
             /* The VFTA is a 4096b bit-field, each identifying a single VLAN
@@ -5392,6 +5954,7 @@
          * manageability unit */
         vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0;
         E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value);
+        E1000_WRITE_FLUSH(hw);
     }
 }
 
@@ -5421,9 +5984,18 @@
         DEBUGOUT("EEPROM Read Error\n");
         return -E1000_ERR_EEPROM;
     }
-    if((eeprom_data== ID_LED_RESERVED_0000) ||
-       (eeprom_data == ID_LED_RESERVED_FFFF)) eeprom_data = ID_LED_DEFAULT;
-    for(i = 0; i < 4; i++) {
+
+    if ((hw->mac_type == e1000_82573) &&
+        (eeprom_data == ID_LED_RESERVED_82573))
+        eeprom_data = ID_LED_DEFAULT_82573;
+    else if ((eeprom_data == ID_LED_RESERVED_0000) ||
+            (eeprom_data == ID_LED_RESERVED_FFFF)) {
+        if (hw->mac_type == e1000_ich8lan)
+            eeprom_data = ID_LED_DEFAULT_ICH8LAN;
+        else
+            eeprom_data = ID_LED_DEFAULT;
+    }
+    for (i = 0; i < 4; i++) {
         temp = (eeprom_data >> (i << 2)) & led_mask;
         switch(temp) {
         case ID_LED_ON1_DEF2:
@@ -5519,6 +6091,44 @@
 }
 
 /******************************************************************************
+ * Used on 82571 and later Si that has LED blink bits.
+ * Callers must use their own timer and should have already called
+ * e1000_id_led_init()
+ * Call e1000_cleanup led() to stop blinking
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+int32_t
+e1000_blink_led_start(struct e1000_hw *hw)
+{
+    int16_t  i;
+    uint32_t ledctl_blink = 0;
+
+    DEBUGFUNC("e1000_id_led_blink_on");
+
+    if (hw->mac_type < e1000_82571) {
+        /* Nothing to do */
+        return E1000_SUCCESS;
+    }
+    if (hw->media_type == e1000_media_type_fiber) {
+        /* always blink LED0 for PCI-E fiber */
+        ledctl_blink = E1000_LEDCTL_LED0_BLINK |
+                     (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT);
+    } else {
+        /* set the blink bit for each LED that's "on" (0x0E) in ledctl_mode2 */
+        ledctl_blink = hw->ledctl_mode2;
+        for (i=0; i < 4; i++)
+            if (((hw->ledctl_mode2 >> (i * 8)) & 0xFF) ==
+                E1000_LEDCTL_MODE_LED_ON)
+                ledctl_blink |= (E1000_LEDCTL_LED0_BLINK << (i * 8));
+    }
+
+    E1000_WRITE_REG(hw, LEDCTL, ledctl_blink);
+
+    return E1000_SUCCESS;
+}
+
+/******************************************************************************
  * Restores the saved state of the SW controlable LED.
  *
  * hw - Struct containing variables accessed by shared code
@@ -5548,6 +6158,10 @@
             return ret_val;
         /* Fall Through */
     default:
+        if (hw->phy_type == e1000_phy_ife) {
+            e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0);
+            break;
+        }
         /* Restore LEDCTL settings */
         E1000_WRITE_REG(hw, LEDCTL, hw->ledctl_default);
         break;
@@ -5592,7 +6206,10 @@
             /* Clear SW Defineable Pin 0 to turn on the LED */
             ctrl &= ~E1000_CTRL_SWDPIN0;
             ctrl |= E1000_CTRL_SWDPIO0;
-        } else if(hw->media_type == e1000_media_type_copper) {
+        } else if (hw->phy_type == e1000_phy_ife) {
+            e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED,
+                 (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_ON));
+        } else if (hw->media_type == e1000_media_type_copper) {
             E1000_WRITE_REG(hw, LEDCTL, hw->ledctl_mode2);
             return E1000_SUCCESS;
         }
@@ -5640,7 +6257,10 @@
             /* Set SW Defineable Pin 0 to turn off the LED */
             ctrl |= E1000_CTRL_SWDPIN0;
             ctrl |= E1000_CTRL_SWDPIO0;
-        } else if(hw->media_type == e1000_media_type_copper) {
+        } else if (hw->phy_type == e1000_phy_ife) {
+            e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED,
+                 (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_OFF));
+        } else if (hw->media_type == e1000_media_type_copper) {
             E1000_WRITE_REG(hw, LEDCTL, hw->ledctl_mode1);
             return E1000_SUCCESS;
         }
@@ -5678,12 +6298,16 @@
     temp = E1000_READ_REG(hw, XOFFRXC);
     temp = E1000_READ_REG(hw, XOFFTXC);
     temp = E1000_READ_REG(hw, FCRUC);
+
+    if (hw->mac_type != e1000_ich8lan) {
     temp = E1000_READ_REG(hw, PRC64);
     temp = E1000_READ_REG(hw, PRC127);
     temp = E1000_READ_REG(hw, PRC255);
     temp = E1000_READ_REG(hw, PRC511);
     temp = E1000_READ_REG(hw, PRC1023);
     temp = E1000_READ_REG(hw, PRC1522);
+    }
+
     temp = E1000_READ_REG(hw, GPRC);
     temp = E1000_READ_REG(hw, BPRC);
     temp = E1000_READ_REG(hw, MPRC);
@@ -5703,12 +6327,16 @@
     temp = E1000_READ_REG(hw, TOTH);
     temp = E1000_READ_REG(hw, TPR);
     temp = E1000_READ_REG(hw, TPT);
+
+    if (hw->mac_type != e1000_ich8lan) {
     temp = E1000_READ_REG(hw, PTC64);
     temp = E1000_READ_REG(hw, PTC127);
     temp = E1000_READ_REG(hw, PTC255);
     temp = E1000_READ_REG(hw, PTC511);
     temp = E1000_READ_REG(hw, PTC1023);
     temp = E1000_READ_REG(hw, PTC1522);
+    }
+
     temp = E1000_READ_REG(hw, MPTC);
     temp = E1000_READ_REG(hw, BPTC);
 
@@ -5731,6 +6359,9 @@
 
     temp = E1000_READ_REG(hw, IAC);
     temp = E1000_READ_REG(hw, ICRXOC);
+
+    if (hw->mac_type == e1000_ich8lan) return;
+
     temp = E1000_READ_REG(hw, ICRXPTC);
     temp = E1000_READ_REG(hw, ICRXATC);
     temp = E1000_READ_REG(hw, ICTXPTC);
@@ -5911,6 +6542,7 @@
         hw->bus_width = e1000_bus_width_pciex_1;
         break;
     case e1000_82571:
+    case e1000_ich8lan:
     case e1000_80003es2lan:
         hw->bus_type = e1000_bus_type_pci_express;
         hw->bus_speed = e1000_bus_speed_2500;
@@ -5948,8 +6580,6 @@
         break;
     }
 }
-
-#if 0
 /******************************************************************************
  * Reads a value from one of the devices registers using port I/O (as opposed
  * memory mapped I/O). Only 82544 and newer devices support port I/O.
@@ -5967,7 +6597,6 @@
     e1000_io_write(hw, io_addr, offset);
     return e1000_io_read(hw, io_data);
 }
-#endif  /*  0  */
 
 /******************************************************************************
  * Writes a value to one of the devices registers using port I/O (as opposed to
@@ -6012,8 +6641,6 @@
 {
     int32_t ret_val;
     uint16_t agc_value = 0;
-    uint16_t cur_agc, min_agc = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
-    uint16_t max_agc = 0;
     uint16_t i, phy_data;
     uint16_t cable_length;
 
@@ -6086,6 +6713,8 @@
             break;
         }
     } else if(hw->phy_type == e1000_phy_igp) { /* For IGP PHY */
+        uint16_t cur_agc_value;
+        uint16_t min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
         uint16_t agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
                                                          {IGP01E1000_PHY_AGC_A,
                                                           IGP01E1000_PHY_AGC_B,
@@ -6098,23 +6727,23 @@
             if(ret_val)
                 return ret_val;
 
-            cur_agc = phy_data >> IGP01E1000_AGC_LENGTH_SHIFT;
+            cur_agc_value = phy_data >> IGP01E1000_AGC_LENGTH_SHIFT;
 
-            /* Array bound check. */
-            if((cur_agc >= IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1) ||
-               (cur_agc == 0))
+            /* Value bound check. */
+            if ((cur_agc_value >= IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1) ||
+                (cur_agc_value == 0))
                 return -E1000_ERR_PHY;
 
-            agc_value += cur_agc;
+            agc_value += cur_agc_value;
 
             /* Update minimal AGC value. */
-            if(min_agc > cur_agc)
-                min_agc = cur_agc;
+            if (min_agc_value > cur_agc_value)
+                min_agc_value = cur_agc_value;
         }
 
         /* Remove the minimal AGC result for length < 50m */
-        if(agc_value < IGP01E1000_PHY_CHANNEL_NUM * e1000_igp_cable_length_50) {
-            agc_value -= min_agc;
+        if (agc_value < IGP01E1000_PHY_CHANNEL_NUM * e1000_igp_cable_length_50) {
+            agc_value -= min_agc_value;
 
             /* Get the average length of the remaining 3 channels */
             agc_value /= (IGP01E1000_PHY_CHANNEL_NUM - 1);
@@ -6130,7 +6759,10 @@
                        IGP01E1000_AGC_RANGE) : 0;
         *max_length = e1000_igp_cable_length_table[agc_value] +
                       IGP01E1000_AGC_RANGE;
-    } else if (hw->phy_type == e1000_phy_igp_2) {
+    } else if (hw->phy_type == e1000_phy_igp_2 ||
+               hw->phy_type == e1000_phy_igp_3) {
+        uint16_t cur_agc_index, max_agc_index = 0;
+        uint16_t min_agc_index = IGP02E1000_AGC_LENGTH_TABLE_SIZE - 1;
         uint16_t agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] =
                                                          {IGP02E1000_PHY_AGC_A,
                                                           IGP02E1000_PHY_AGC_B,
@@ -6145,19 +6777,27 @@
 	    /* Getting bits 15:9, which represent the combination of course and
              * fine gain values.  The result is a number that can be put into
              * the lookup table to obtain the approximate cable length. */
-            cur_agc = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
-                      IGP02E1000_AGC_LENGTH_MASK;
+            cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
+                            IGP02E1000_AGC_LENGTH_MASK;
+
+            /* Array index bound check. */
+            if ((cur_agc_index >= IGP02E1000_AGC_LENGTH_TABLE_SIZE) ||
+                (cur_agc_index == 0))
+                return -E1000_ERR_PHY;
 
             /* Remove min & max AGC values from calculation. */
-            if (e1000_igp_2_cable_length_table[min_agc] > e1000_igp_2_cable_length_table[cur_agc])
-                min_agc = cur_agc;
-	    if (e1000_igp_2_cable_length_table[max_agc] < e1000_igp_2_cable_length_table[cur_agc])
-                max_agc = cur_agc;
+            if (e1000_igp_2_cable_length_table[min_agc_index] >
+                e1000_igp_2_cable_length_table[cur_agc_index])
+                min_agc_index = cur_agc_index;
+            if (e1000_igp_2_cable_length_table[max_agc_index] <
+                e1000_igp_2_cable_length_table[cur_agc_index])
+                max_agc_index = cur_agc_index;
 
-            agc_value += e1000_igp_2_cable_length_table[cur_agc];
+            agc_value += e1000_igp_2_cable_length_table[cur_agc_index];
         }
 
-        agc_value -= (e1000_igp_2_cable_length_table[min_agc] + e1000_igp_2_cable_length_table[max_agc]);
+        agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] +
+                      e1000_igp_2_cable_length_table[max_agc_index]);
         agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2);
 
         /* Calculate cable length with the error range of +/- 10 meters. */
@@ -6203,7 +6843,8 @@
             return ret_val;
         *polarity = (phy_data & M88E1000_PSSR_REV_POLARITY) >>
                     M88E1000_PSSR_REV_POLARITY_SHIFT;
-    } else if(hw->phy_type == e1000_phy_igp ||
+    } else if (hw->phy_type == e1000_phy_igp ||
+              hw->phy_type == e1000_phy_igp_3 ||
               hw->phy_type == e1000_phy_igp_2) {
         /* Read the Status register to check the speed */
         ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS,
@@ -6229,6 +6870,13 @@
              * 100 Mbps this bit is always 0) */
             *polarity = phy_data & IGP01E1000_PSSR_POLARITY_REVERSED;
         }
+    } else if (hw->phy_type == e1000_phy_ife) {
+        ret_val = e1000_read_phy_reg(hw, IFE_PHY_EXTENDED_STATUS_CONTROL,
+                                     &phy_data);
+        if (ret_val)
+            return ret_val;
+        *polarity = (phy_data & IFE_PESC_POLARITY_REVERSED) >>
+                           IFE_PESC_POLARITY_REVERSED_SHIFT;
     }
     return E1000_SUCCESS;
 }
@@ -6256,7 +6904,8 @@
 
     DEBUGFUNC("e1000_check_downshift");
 
-    if(hw->phy_type == e1000_phy_igp ||
+    if (hw->phy_type == e1000_phy_igp ||
+        hw->phy_type == e1000_phy_igp_3 ||
         hw->phy_type == e1000_phy_igp_2) {
         ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH,
                                      &phy_data);
@@ -6273,6 +6922,9 @@
 
         hw->speed_downgraded = (phy_data & M88E1000_PSSR_DOWNSHIFT) >>
                                M88E1000_PSSR_DOWNSHIFT_SHIFT;
+    } else if (hw->phy_type == e1000_phy_ife) {
+        /* e1000_phy_ife supports 10/100 speed only */
+        hw->speed_downgraded = FALSE;
     }
 
     return E1000_SUCCESS;
@@ -6317,7 +6969,9 @@
 
         if(speed == SPEED_1000) {
 
-            e1000_get_cable_length(hw, &min_length, &max_length);
+            ret_val = e1000_get_cable_length(hw, &min_length, &max_length);
+            if (ret_val)
+                return ret_val;
 
             if((hw->dsp_config_state == e1000_dsp_config_enabled) &&
                 min_length >= e1000_igp_cable_length_50) {
@@ -6525,20 +7179,27 @@
 e1000_set_d3_lplu_state(struct e1000_hw *hw,
                         boolean_t active)
 {
+    uint32_t phy_ctrl = 0;
     int32_t ret_val;
     uint16_t phy_data;
     DEBUGFUNC("e1000_set_d3_lplu_state");
 
-    if(hw->phy_type != e1000_phy_igp && hw->phy_type != e1000_phy_igp_2)
+    if (hw->phy_type != e1000_phy_igp && hw->phy_type != e1000_phy_igp_2
+        && hw->phy_type != e1000_phy_igp_3)
         return E1000_SUCCESS;
 
     /* During driver activity LPLU should not be used or it will attain link
      * from the lowest speeds starting from 10Mbps. The capability is used for
      * Dx transitions and states */
-    if(hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) {
+    if (hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) {
         ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data);
-        if(ret_val)
+        if (ret_val)
             return ret_val;
+    } else if (hw->mac_type == e1000_ich8lan) {
+        /* MAC writes into PHY register based on the state transition
+         * and start auto-negotiation. SW driver can overwrite the settings
+         * in CSR PHY power control E1000_PHY_CTRL register. */
+        phy_ctrl = E1000_READ_REG(hw, PHY_CTRL);
     } else {
         ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
         if(ret_val)
@@ -6553,11 +7214,16 @@
             if(ret_val)
                 return ret_val;
         } else {
+            if (hw->mac_type == e1000_ich8lan) {
+                phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU;
+                E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl);
+            } else {
                 phy_data &= ~IGP02E1000_PM_D3_LPLU;
                 ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
                                               phy_data);
                 if (ret_val)
                     return ret_val;
+            }
         }
 
         /* LPLU and SmartSpeed are mutually exclusive.  LPLU is used during
@@ -6593,17 +7259,22 @@
               (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_100_ALL)) {
 
         if(hw->mac_type == e1000_82541_rev_2 ||
-           hw->mac_type == e1000_82547_rev_2) {
+            hw->mac_type == e1000_82547_rev_2) {
             phy_data |= IGP01E1000_GMII_FLEX_SPD;
             ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data);
             if(ret_val)
                 return ret_val;
         } else {
+            if (hw->mac_type == e1000_ich8lan) {
+                phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU;
+                E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl);
+            } else {
                 phy_data |= IGP02E1000_PM_D3_LPLU;
                 ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
                                               phy_data);
                 if (ret_val)
                     return ret_val;
+            }
         }
 
         /* When LPLU is enabled we should disable SmartSpeed */
@@ -6638,6 +7309,7 @@
 e1000_set_d0_lplu_state(struct e1000_hw *hw,
                         boolean_t active)
 {
+    uint32_t phy_ctrl = 0;
     int32_t ret_val;
     uint16_t phy_data;
     DEBUGFUNC("e1000_set_d0_lplu_state");
@@ -6645,15 +7317,24 @@
     if(hw->mac_type <= e1000_82547_rev_2)
         return E1000_SUCCESS;
 
+    if (hw->mac_type == e1000_ich8lan) {
+        phy_ctrl = E1000_READ_REG(hw, PHY_CTRL);
+    } else {
         ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
         if(ret_val)
             return ret_val;
+    }
 
     if (!active) {
+        if (hw->mac_type == e1000_ich8lan) {
+            phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU;
+            E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl);
+        } else {
             phy_data &= ~IGP02E1000_PM_D0_LPLU;
             ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
             if (ret_val)
                 return ret_val;
+        }
 
         /* LPLU and SmartSpeed are mutually exclusive.  LPLU is used during
          * Dx states where the power conservation is most important.  During
@@ -6686,10 +7367,15 @@
 
     } else {
 
+        if (hw->mac_type == e1000_ich8lan) {
+            phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU;
+            E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl);
+        } else {
             phy_data |= IGP02E1000_PM_D0_LPLU;
             ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
             if (ret_val)
                 return ret_val;
+        }
 
         /* When LPLU is enabled we should disable SmartSpeed */
         ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data);
@@ -6928,8 +7614,10 @@
 
     length >>= 2;
     /* The device driver writes the relevant command block into the ram area. */
-    for (i = 0; i < length; i++)
+    for (i = 0; i < length; i++) {
         E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, i, *((uint32_t *) hdr + i));
+        E1000_WRITE_FLUSH(hw);
+    }
 
     return E1000_SUCCESS;
 }
@@ -6961,15 +7649,18 @@
  * returns  - TRUE when the mode is IAMT or FALSE.
  ****************************************************************************/
 boolean_t
-e1000_check_mng_mode(
-    struct e1000_hw *hw)
+e1000_check_mng_mode(struct e1000_hw *hw)
 {
     uint32_t fwsm;
 
     fwsm = E1000_READ_REG(hw, FWSM);
 
-    if((fwsm & E1000_FWSM_MODE_MASK) ==
-        (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT))
+    if (hw->mac_type == e1000_ich8lan) {
+        if ((fwsm & E1000_FWSM_MODE_MASK) ==
+            (E1000_MNG_ICH_IAMT_MODE << E1000_FWSM_MODE_SHIFT))
+            return TRUE;
+    } else if ((fwsm & E1000_FWSM_MODE_MASK) ==
+               (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT))
         return TRUE;
 
     return FALSE;
@@ -7209,7 +7900,6 @@
     E1000_WRITE_REG(hw, CTRL, ctrl);
 }
 
-#if 0
 /***************************************************************************
  *
  * Enables PCI-Express master access.
@@ -7233,7 +7923,6 @@
     ctrl &= ~E1000_CTRL_GIO_MASTER_DISABLE;
     E1000_WRITE_REG(hw, CTRL, ctrl);
 }
-#endif  /*  0  */
 
 /*******************************************************************************
  *
@@ -7299,8 +7988,10 @@
     case e1000_82572:
     case e1000_82573:
     case e1000_80003es2lan:
-        while(timeout) {
-            if (E1000_READ_REG(hw, EECD) & E1000_EECD_AUTO_RD) break;
+    case e1000_ich8lan:
+        while (timeout) {
+            if (E1000_READ_REG(hw, EECD) & E1000_EECD_AUTO_RD)
+                break;
             else msec_delay(1);
             timeout--;
         }
@@ -7340,7 +8031,7 @@
 
     switch (hw->mac_type) {
     default:
-        msec_delay(10);
+        msec_delay_irq(10);
         break;
     case e1000_80003es2lan:
         /* Separate *_CFG_DONE_* bit for each port */
@@ -7523,6 +8214,13 @@
 e1000_check_phy_reset_block(struct e1000_hw *hw)
 {
     uint32_t manc = 0;
+    uint32_t fwsm = 0;
+
+    if (hw->mac_type == e1000_ich8lan) {
+        fwsm = E1000_READ_REG(hw, FWSM);
+        return (fwsm & E1000_FWSM_RSPCIPHY) ? E1000_SUCCESS
+                                            : E1000_BLK_PHY_RESET;
+    }
 
     if (hw->mac_type > e1000_82547_rev_2)
         manc = E1000_READ_REG(hw, MANC);
@@ -7549,6 +8247,8 @@
         if((fwsm & E1000_FWSM_MODE_MASK) != 0)
             return TRUE;
         break;
+    case e1000_ich8lan:
+        return TRUE;
     default:
         break;
     }
@@ -7556,4 +8256,846 @@
 }
 
 
+/******************************************************************************
+ * Configure PCI-Ex no-snoop
+ *
+ * hw - Struct containing variables accessed by shared code.
+ * no_snoop - Bitmap of no-snoop events.
+ *
+ * returns: E1000_SUCCESS
+ *
+ *****************************************************************************/
+int32_t
+e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop)
+{
+    uint32_t gcr_reg = 0;
+
+    DEBUGFUNC("e1000_set_pci_ex_no_snoop");
+
+    if (hw->bus_type == e1000_bus_type_unknown)
+        e1000_get_bus_info(hw);
+
+    if (hw->bus_type != e1000_bus_type_pci_express)
+        return E1000_SUCCESS;
+
+    if (no_snoop) {
+        gcr_reg = E1000_READ_REG(hw, GCR);
+        gcr_reg &= ~(PCI_EX_NO_SNOOP_ALL);
+        gcr_reg |= no_snoop;
+        E1000_WRITE_REG(hw, GCR, gcr_reg);
+    }
+    if (hw->mac_type == e1000_ich8lan) {
+        uint32_t ctrl_ext;
+
+        E1000_WRITE_REG(hw, GCR, PCI_EX_82566_SNOOP_ALL);
+
+        ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
+        ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
+        E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
+    }
+
+    return E1000_SUCCESS;
+}
+
+/***************************************************************************
+ *
+ * Get software semaphore FLAG bit (SWFLAG).
+ * SWFLAG is used to synchronize the access to all shared resource between
+ * SW, FW and HW.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ ***************************************************************************/
+int32_t
+e1000_get_software_flag(struct e1000_hw *hw)
+{
+    int32_t timeout = PHY_CFG_TIMEOUT;
+    uint32_t extcnf_ctrl;
+
+    DEBUGFUNC("e1000_get_software_flag");
+
+    if (hw->mac_type == e1000_ich8lan) {
+        while (timeout) {
+            extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL);
+            extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
+            E1000_WRITE_REG(hw, EXTCNF_CTRL, extcnf_ctrl);
+
+            extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL);
+            if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
+                break;
+            msec_delay_irq(1);
+            timeout--;
+        }
+
+        if (!timeout) {
+            DEBUGOUT("FW or HW locks the resource too long.\n");
+            return -E1000_ERR_CONFIG;
+        }
+    }
+
+    return E1000_SUCCESS;
+}
+
+/***************************************************************************
+ *
+ * Release software semaphore FLAG bit (SWFLAG).
+ * SWFLAG is used to synchronize the access to all shared resource between
+ * SW, FW and HW.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ ***************************************************************************/
+void
+e1000_release_software_flag(struct e1000_hw *hw)
+{
+    uint32_t extcnf_ctrl;
+
+    DEBUGFUNC("e1000_release_software_flag");
+
+    if (hw->mac_type == e1000_ich8lan) {
+        extcnf_ctrl= E1000_READ_REG(hw, EXTCNF_CTRL);
+        extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
+        E1000_WRITE_REG(hw, EXTCNF_CTRL, extcnf_ctrl);
+    }
+
+    return;
+}
+
+/***************************************************************************
+ *
+ * Disable dynamic power down mode in ife PHY.
+ * It can be used to workaround band-gap problem.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ ***************************************************************************/
+int32_t
+e1000_ife_disable_dynamic_power_down(struct e1000_hw *hw)
+{
+    uint16_t phy_data;
+    int32_t ret_val = E1000_SUCCESS;
+
+    DEBUGFUNC("e1000_ife_disable_dynamic_power_down");
+
+    if (hw->phy_type == e1000_phy_ife) {
+        ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data);
+        if (ret_val)
+            return ret_val;
+
+        phy_data |=  IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN;
+        ret_val = e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, phy_data);
+    }
+
+    return ret_val;
+}
+
+/***************************************************************************
+ *
+ * Enable dynamic power down mode in ife PHY.
+ * It can be used to workaround band-gap problem.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ ***************************************************************************/
+int32_t
+e1000_ife_enable_dynamic_power_down(struct e1000_hw *hw)
+{
+    uint16_t phy_data;
+    int32_t ret_val = E1000_SUCCESS;
+
+    DEBUGFUNC("e1000_ife_enable_dynamic_power_down");
+
+    if (hw->phy_type == e1000_phy_ife) {
+        ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data);
+        if (ret_val)
+            return ret_val;
+
+        phy_data &=  ~IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN;
+        ret_val = e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, phy_data);
+    }
+
+    return ret_val;
+}
+
+/******************************************************************************
+ * Reads a 16 bit word or words from the EEPROM using the ICH8's flash access
+ * register.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of word in the EEPROM to read
+ * data - word read from the EEPROM
+ * words - number of words to read
+ *****************************************************************************/
+int32_t
+e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words,
+                       uint16_t *data)
+{
+    int32_t  error = E1000_SUCCESS;
+    uint32_t flash_bank = 0;
+    uint32_t act_offset = 0;
+    uint32_t bank_offset = 0;
+    uint16_t word = 0;
+    uint16_t i = 0;
+
+    /* We need to know which is the valid flash bank.  In the event
+     * that we didn't allocate eeprom_shadow_ram, we may not be
+     * managing flash_bank.  So it cannot be trusted and needs
+     * to be updated with each read.
+     */
+    /* Value of bit 22 corresponds to the flash bank we're on. */
+    flash_bank = (E1000_READ_REG(hw, EECD) & E1000_EECD_SEC1VAL) ? 1 : 0;
+
+    /* Adjust offset appropriately if we're on bank 1 - adjust for word size */
+    bank_offset = flash_bank * (hw->flash_bank_size * 2);
+
+    error = e1000_get_software_flag(hw);
+    if (error != E1000_SUCCESS)
+        return error;
+
+    for (i = 0; i < words; i++) {
+        if (hw->eeprom_shadow_ram != NULL &&
+            hw->eeprom_shadow_ram[offset+i].modified == TRUE) {
+            data[i] = hw->eeprom_shadow_ram[offset+i].eeprom_word;
+        } else {
+            /* The NVM part needs a byte offset, hence * 2 */
+            act_offset = bank_offset + ((offset + i) * 2);
+            error = e1000_read_ich8_word(hw, act_offset, &word);
+            if (error != E1000_SUCCESS)
+                break;
+            data[i] = word;
+        }
+    }
+
+    e1000_release_software_flag(hw);
+
+    return error;
+}
+
+/******************************************************************************
+ * Writes a 16 bit word or words to the EEPROM using the ICH8's flash access
+ * register.  Actually, writes are written to the shadow ram cache in the hw
+ * structure hw->e1000_shadow_ram.  e1000_commit_shadow_ram flushes this to
+ * the NVM, which occurs when the NVM checksum is updated.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of word in the EEPROM to write
+ * words - number of words to write
+ * data - words to write to the EEPROM
+ *****************************************************************************/
+int32_t
+e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words,
+                        uint16_t *data)
+{
+    uint32_t i = 0;
+    int32_t error = E1000_SUCCESS;
+
+    error = e1000_get_software_flag(hw);
+    if (error != E1000_SUCCESS)
+        return error;
+
+    /* A driver can write to the NVM only if it has eeprom_shadow_ram
+     * allocated.  Subsequent reads to the modified words are read from
+     * this cached structure as well.  Writes will only go into this
+     * cached structure unless it's followed by a call to
+     * e1000_update_eeprom_checksum() where it will commit the changes
+     * and clear the "modified" field.
+     */
+    if (hw->eeprom_shadow_ram != NULL) {
+        for (i = 0; i < words; i++) {
+            if ((offset + i) < E1000_SHADOW_RAM_WORDS) {
+                hw->eeprom_shadow_ram[offset+i].modified = TRUE;
+                hw->eeprom_shadow_ram[offset+i].eeprom_word = data[i];
+            } else {
+                error = -E1000_ERR_EEPROM;
+                break;
+            }
+        }
+    } else {
+        /* Drivers have the option to not allocate eeprom_shadow_ram as long
+         * as they don't perform any NVM writes.  An attempt in doing so
+         * will result in this error.
+         */
+        error = -E1000_ERR_EEPROM;
+    }
+
+    e1000_release_software_flag(hw);
+
+    return error;
+}
+
+/******************************************************************************
+ * This function does initial flash setup so that a new read/write/erase cycle
+ * can be started.
+ *
+ * hw - The pointer to the hw structure
+ ****************************************************************************/
+int32_t
+e1000_ich8_cycle_init(struct e1000_hw *hw)
+{
+    union ich8_hws_flash_status hsfsts;
+    int32_t error = E1000_ERR_EEPROM;
+    int32_t i     = 0;
+
+    DEBUGFUNC("e1000_ich8_cycle_init");
+
+    hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+
+    /* May be check the Flash Des Valid bit in Hw status */
+    if (hsfsts.hsf_status.fldesvalid == 0) {
+        DEBUGOUT("Flash descriptor invalid.  SW Sequencing must be used.");
+        return error;
+    }
+
+    /* Clear FCERR in Hw status by writing 1 */
+    /* Clear DAEL in Hw status by writing a 1 */
+    hsfsts.hsf_status.flcerr = 1;
+    hsfsts.hsf_status.dael = 1;
+
+    E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval);
+
+    /* Either we should have a hardware SPI cycle in progress bit to check
+     * against, in order to start a new cycle or FDONE bit should be changed
+     * in the hardware so that it is 1 after harware reset, which can then be
+     * used as an indication whether a cycle is in progress or has been
+     * completed .. we should also have some software semaphore mechanism to
+     * guard FDONE or the cycle in progress bit so that two threads access to
+     * those bits can be sequentiallized or a way so that 2 threads dont
+     * start the cycle at the same time */
+
+    if (hsfsts.hsf_status.flcinprog == 0) {
+        /* There is no cycle running at present, so we can start a cycle */
+        /* Begin by setting Flash Cycle Done. */
+        hsfsts.hsf_status.flcdone = 1;
+        E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval);
+        error = E1000_SUCCESS;
+    } else {
+        /* otherwise poll for sometime so the current cycle has a chance
+         * to end before giving up. */
+        for (i = 0; i < ICH8_FLASH_COMMAND_TIMEOUT; i++) {
+            hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+            if (hsfsts.hsf_status.flcinprog == 0) {
+                error = E1000_SUCCESS;
+                break;
+            }
+            udelay(1);
+        }
+        if (error == E1000_SUCCESS) {
+            /* Successful in waiting for previous cycle to timeout,
+             * now set the Flash Cycle Done. */
+            hsfsts.hsf_status.flcdone = 1;
+            E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval);
+        } else {
+            DEBUGOUT("Flash controller busy, cannot get access");
+        }
+    }
+    return error;
+}
+
+/******************************************************************************
+ * This function starts a flash cycle and waits for its completion
+ *
+ * hw - The pointer to the hw structure
+ ****************************************************************************/
+int32_t
+e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout)
+{
+    union ich8_hws_flash_ctrl hsflctl;
+    union ich8_hws_flash_status hsfsts;
+    int32_t error = E1000_ERR_EEPROM;
+    uint32_t i = 0;
+
+    /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */
+    hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL);
+    hsflctl.hsf_ctrl.flcgo = 1;
+    E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval);
+
+    /* wait till FDONE bit is set to 1 */
+    do {
+        hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+        if (hsfsts.hsf_status.flcdone == 1)
+            break;
+        udelay(1);
+        i++;
+    } while (i < timeout);
+    if (hsfsts.hsf_status.flcdone == 1 && hsfsts.hsf_status.flcerr == 0) {
+        error = E1000_SUCCESS;
+    }
+    return error;
+}
+
+/******************************************************************************
+ * Reads a byte or word from the NVM using the ICH8 flash access registers.
+ *
+ * hw - The pointer to the hw structure
+ * index - The index of the byte or word to read.
+ * size - Size of data to read, 1=byte 2=word
+ * data - Pointer to the word to store the value read.
+ *****************************************************************************/
+int32_t
+e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index,
+                     uint32_t size, uint16_t* data)
+{
+    union ich8_hws_flash_status hsfsts;
+    union ich8_hws_flash_ctrl hsflctl;
+    uint32_t flash_linear_address;
+    uint32_t flash_data = 0;
+    int32_t error = -E1000_ERR_EEPROM;
+    int32_t count = 0;
+
+    DEBUGFUNC("e1000_read_ich8_data");
+
+    if (size < 1  || size > 2 || data == 0x0 ||
+        index > ICH8_FLASH_LINEAR_ADDR_MASK)
+        return error;
+
+    flash_linear_address = (ICH8_FLASH_LINEAR_ADDR_MASK & index) +
+                           hw->flash_base_addr;
+
+    do {
+        udelay(1);
+        /* Steps */
+        error = e1000_ich8_cycle_init(hw);
+        if (error != E1000_SUCCESS)
+            break;
+
+        hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL);
+        /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
+        hsflctl.hsf_ctrl.fldbcount = size - 1;
+        hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_READ;
+        E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval);
+
+        /* Write the last 24 bits of index into Flash Linear address field in
+         * Flash Address */
+        /* TODO: TBD maybe check the index against the size of flash */
+
+        E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address);
+
+        error = e1000_ich8_flash_cycle(hw, ICH8_FLASH_COMMAND_TIMEOUT);
+
+        /* Check if FCERR is set to 1, if set to 1, clear it and try the whole
+         * sequence a few more times, else read in (shift in) the Flash Data0,
+         * the order is least significant byte first msb to lsb */
+        if (error == E1000_SUCCESS) {
+            flash_data = E1000_READ_ICH8_REG(hw, ICH8_FLASH_FDATA0);
+            if (size == 1) {
+                *data = (uint8_t)(flash_data & 0x000000FF);
+            } else if (size == 2) {
+                *data = (uint16_t)(flash_data & 0x0000FFFF);
+            }
+            break;
+        } else {
+            /* If we've gotten here, then things are probably completely hosed,
+             * but if the error condition is detected, it won't hurt to give
+             * it another try...ICH8_FLASH_CYCLE_REPEAT_COUNT times.
+             */
+            hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+            if (hsfsts.hsf_status.flcerr == 1) {
+                /* Repeat for some time before giving up. */
+                continue;
+            } else if (hsfsts.hsf_status.flcdone == 0) {
+                DEBUGOUT("Timeout error - flash cycle did not complete.");
+                break;
+            }
+        }
+    } while (count++ < ICH8_FLASH_CYCLE_REPEAT_COUNT);
+
+    return error;
+}
+
+/******************************************************************************
+ * Writes One /two bytes to the NVM using the ICH8 flash access registers.
+ *
+ * hw - The pointer to the hw structure
+ * index - The index of the byte/word to read.
+ * size - Size of data to read, 1=byte 2=word
+ * data - The byte(s) to write to the NVM.
+ *****************************************************************************/
+int32_t
+e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size,
+                      uint16_t data)
+{
+    union ich8_hws_flash_status hsfsts;
+    union ich8_hws_flash_ctrl hsflctl;
+    uint32_t flash_linear_address;
+    uint32_t flash_data = 0;
+    int32_t error = -E1000_ERR_EEPROM;
+    int32_t count = 0;
+
+    DEBUGFUNC("e1000_write_ich8_data");
+
+    if (size < 1  || size > 2 || data > size * 0xff ||
+        index > ICH8_FLASH_LINEAR_ADDR_MASK)
+        return error;
+
+    flash_linear_address = (ICH8_FLASH_LINEAR_ADDR_MASK & index) +
+                           hw->flash_base_addr;
+
+    do {
+        udelay(1);
+        /* Steps */
+        error = e1000_ich8_cycle_init(hw);
+        if (error != E1000_SUCCESS)
+            break;
+
+        hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL);
+        /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
+        hsflctl.hsf_ctrl.fldbcount = size -1;
+        hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_WRITE;
+        E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval);
+
+        /* Write the last 24 bits of index into Flash Linear address field in
+         * Flash Address */
+        E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address);
+
+        if (size == 1)
+            flash_data = (uint32_t)data & 0x00FF;
+        else
+            flash_data = (uint32_t)data;
+
+        E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FDATA0, flash_data);
+
+        /* check if FCERR is set to 1 , if set to 1, clear it and try the whole
+         * sequence a few more times else done */
+        error = e1000_ich8_flash_cycle(hw, ICH8_FLASH_COMMAND_TIMEOUT);
+        if (error == E1000_SUCCESS) {
+            break;
+        } else {
+            /* If we're here, then things are most likely completely hosed,
+             * but if the error condition is detected, it won't hurt to give
+             * it another try...ICH8_FLASH_CYCLE_REPEAT_COUNT times.
+             */
+            hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+            if (hsfsts.hsf_status.flcerr == 1) {
+                /* Repeat for some time before giving up. */
+                continue;
+            } else if (hsfsts.hsf_status.flcdone == 0) {
+                DEBUGOUT("Timeout error - flash cycle did not complete.");
+                break;
+            }
+        }
+    } while (count++ < ICH8_FLASH_CYCLE_REPEAT_COUNT);
+
+    return error;
+}
+
+/******************************************************************************
+ * Reads a single byte from the NVM using the ICH8 flash access registers.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The index of the byte to read.
+ * data - Pointer to a byte to store the value read.
+ *****************************************************************************/
+int32_t
+e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t* data)
+{
+    int32_t status = E1000_SUCCESS;
+    uint16_t word = 0;
+
+    status = e1000_read_ich8_data(hw, index, 1, &word);
+    if (status == E1000_SUCCESS) {
+        *data = (uint8_t)word;
+    }
+
+    return status;
+}
+
+/******************************************************************************
+ * Writes a single byte to the NVM using the ICH8 flash access registers.
+ * Performs verification by reading back the value and then going through
+ * a retry algorithm before giving up.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The index of the byte to write.
+ * byte - The byte to write to the NVM.
+ *****************************************************************************/
+int32_t
+e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte)
+{
+    int32_t error = E1000_SUCCESS;
+    int32_t program_retries;
+    uint8_t temp_byte;
+
+    e1000_write_ich8_byte(hw, index, byte);
+    udelay(100);
+
+    for (program_retries = 0; program_retries < 100; program_retries++) {
+        e1000_read_ich8_byte(hw, index, &temp_byte);
+        if (temp_byte == byte)
+            break;
+        udelay(10);
+        e1000_write_ich8_byte(hw, index, byte);
+        udelay(100);
+    }
+    if (program_retries == 100)
+        error = E1000_ERR_EEPROM;
+
+    return error;
+}
+
+/******************************************************************************
+ * Writes a single byte to the NVM using the ICH8 flash access registers.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The index of the byte to read.
+ * data - The byte to write to the NVM.
+ *****************************************************************************/
+int32_t
+e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t data)
+{
+    int32_t status = E1000_SUCCESS;
+    uint16_t word = (uint16_t)data;
+
+    status = e1000_write_ich8_data(hw, index, 1, word);
+
+    return status;
+}
+
+/******************************************************************************
+ * Reads a word from the NVM using the ICH8 flash access registers.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The starting byte index of the word to read.
+ * data - Pointer to a word to store the value read.
+ *****************************************************************************/
+int32_t
+e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data)
+{
+    int32_t status = E1000_SUCCESS;
+    status = e1000_read_ich8_data(hw, index, 2, data);
+    return status;
+}
+
+/******************************************************************************
+ * Writes a word to the NVM using the ICH8 flash access registers.
+ *
+ * hw - pointer to e1000_hw structure
+ * index - The starting byte index of the word to read.
+ * data - The word to write to the NVM.
+ *****************************************************************************/
+int32_t
+e1000_write_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t data)
+{
+    int32_t status = E1000_SUCCESS;
+    status = e1000_write_ich8_data(hw, index, 2, data);
+    return status;
+}
+
+/******************************************************************************
+ * Erases the bank specified. Each bank is a 4k block. Segments are 0 based.
+ * segment N is 4096 * N + flash_reg_addr.
+ *
+ * hw - pointer to e1000_hw structure
+ * segment - 0 for first segment, 1 for second segment, etc.
+ *****************************************************************************/
+int32_t
+e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment)
+{
+    union ich8_hws_flash_status hsfsts;
+    union ich8_hws_flash_ctrl hsflctl;
+    uint32_t flash_linear_address;
+    int32_t  count = 0;
+    int32_t  error = E1000_ERR_EEPROM;
+    int32_t  iteration, seg_size;
+    int32_t  sector_size;
+    int32_t  j = 0;
+    int32_t  error_flag = 0;
+
+    hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+
+    /* Determine HW Sector size: Read BERASE bits of Hw flash Status register */
+    /* 00: The Hw sector is 256 bytes, hence we need to erase 16
+     *     consecutive sectors.  The start index for the nth Hw sector can be
+     *     calculated as = segment * 4096 + n * 256
+     * 01: The Hw sector is 4K bytes, hence we need to erase 1 sector.
+     *     The start index for the nth Hw sector can be calculated
+     *     as = segment * 4096
+     * 10: Error condition
+     * 11: The Hw sector size is much bigger than the size asked to
+     *     erase...error condition */
+    if (hsfsts.hsf_status.berasesz == 0x0) {
+        /* Hw sector size 256 */
+        sector_size = seg_size = ICH8_FLASH_SEG_SIZE_256;
+        iteration = ICH8_FLASH_SECTOR_SIZE / ICH8_FLASH_SEG_SIZE_256;
+    } else if (hsfsts.hsf_status.berasesz == 0x1) {
+        sector_size = seg_size = ICH8_FLASH_SEG_SIZE_4K;
+        iteration = 1;
+    } else if (hsfsts.hsf_status.berasesz == 0x3) {
+        sector_size = seg_size = ICH8_FLASH_SEG_SIZE_64K;
+        iteration = 1;
+    } else {
+        return error;
+    }
+
+    for (j = 0; j < iteration ; j++) {
+        do {
+            count++;
+            /* Steps */
+            error = e1000_ich8_cycle_init(hw);
+            if (error != E1000_SUCCESS) {
+                error_flag = 1;
+                break;
+            }
+
+            /* Write a value 11 (block Erase) in Flash Cycle field in Hw flash
+             * Control */
+            hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL);
+            hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_ERASE;
+            E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval);
+
+            /* Write the last 24 bits of an index within the block into Flash
+             * Linear address field in Flash Address.  This probably needs to
+             * be calculated here based off the on-chip segment size and the
+             * software segment size assumed (4K) */
+            /* TBD */
+            flash_linear_address = segment * sector_size + j * seg_size;
+            flash_linear_address &= ICH8_FLASH_LINEAR_ADDR_MASK;
+            flash_linear_address += hw->flash_base_addr;
+
+            E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address);
+
+            error = e1000_ich8_flash_cycle(hw, 1000000);
+            /* Check if FCERR is set to 1.  If 1, clear it and try the whole
+             * sequence a few more times else Done */
+            if (error == E1000_SUCCESS) {
+                break;
+            } else {
+                hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS);
+                if (hsfsts.hsf_status.flcerr == 1) {
+                    /* repeat for some time before giving up */
+                    continue;
+                } else if (hsfsts.hsf_status.flcdone == 0) {
+                    error_flag = 1;
+                    break;
+                }
+            }
+        } while ((count < ICH8_FLASH_CYCLE_REPEAT_COUNT) && !error_flag);
+        if (error_flag == 1)
+            break;
+    }
+    if (error_flag != 1)
+        error = E1000_SUCCESS;
+    return error;
+}
+
+/******************************************************************************
+ *
+ * Reverse duplex setting without breaking the link.
+ *
+ * hw: Struct containing variables accessed by shared code
+ *
+ *****************************************************************************/
+int32_t
+e1000_duplex_reversal(struct e1000_hw *hw)
+{
+    int32_t ret_val;
+    uint16_t phy_data;
+
+    if (hw->phy_type != e1000_phy_igp_3)
+        return E1000_SUCCESS;
+
+    ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
+    if (ret_val)
+        return ret_val;
+
+    phy_data ^= MII_CR_FULL_DUPLEX;
+
+    ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
+    if (ret_val)
+        return ret_val;
+
+    ret_val = e1000_read_phy_reg(hw, IGP3E1000_PHY_MISC_CTRL, &phy_data);
+    if (ret_val)
+        return ret_val;
+
+    phy_data |= IGP3_PHY_MISC_DUPLEX_MANUAL_SET;
+    ret_val = e1000_write_phy_reg(hw, IGP3E1000_PHY_MISC_CTRL, phy_data);
+
+    return ret_val;
+}
+
+int32_t
+e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw,
+                                      uint32_t cnf_base_addr, uint32_t cnf_size)
+{
+    uint32_t ret_val = E1000_SUCCESS;
+    uint16_t word_addr, reg_data, reg_addr;
+    uint16_t i;
+
+    /* cnf_base_addr is in DWORD */
+    word_addr = (uint16_t)(cnf_base_addr << 1);
+
+    /* cnf_size is returned in size of dwords */
+    for (i = 0; i < cnf_size; i++) {
+        ret_val = e1000_read_eeprom(hw, (word_addr + i*2), 1, &reg_data);
+        if (ret_val)
+            return ret_val;
+
+        ret_val = e1000_read_eeprom(hw, (word_addr + i*2 + 1), 1, &reg_addr);
+        if (ret_val)
+            return ret_val;
+
+        ret_val = e1000_get_software_flag(hw);
+        if (ret_val != E1000_SUCCESS)
+            return ret_val;
+
+        ret_val = e1000_write_phy_reg_ex(hw, (uint32_t)reg_addr, reg_data);
+
+        e1000_release_software_flag(hw);
+    }
+
+    return ret_val;
+}
+
+
+int32_t
+e1000_init_lcd_from_nvm(struct e1000_hw *hw)
+{
+    uint32_t reg_data, cnf_base_addr, cnf_size, ret_val, loop;
+
+    if (hw->phy_type != e1000_phy_igp_3)
+          return E1000_SUCCESS;
+
+    /* Check if SW needs configure the PHY */
+    reg_data = E1000_READ_REG(hw, FEXTNVM);
+    if (!(reg_data & FEXTNVM_SW_CONFIG))
+        return E1000_SUCCESS;
+
+    /* Wait for basic configuration completes before proceeding*/
+    loop = 0;
+    do {
+        reg_data = E1000_READ_REG(hw, STATUS) & E1000_STATUS_LAN_INIT_DONE;
+        udelay(100);
+        loop++;
+    } while ((!reg_data) && (loop < 50));
+
+    /* Clear the Init Done bit for the next init event */
+    reg_data = E1000_READ_REG(hw, STATUS);
+    reg_data &= ~E1000_STATUS_LAN_INIT_DONE;
+    E1000_WRITE_REG(hw, STATUS, reg_data);
+
+    /* Make sure HW does not configure LCD from PHY extended configuration
+       before SW configuration */
+    reg_data = E1000_READ_REG(hw, EXTCNF_CTRL);
+    if ((reg_data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) == 0x0000) {
+        reg_data = E1000_READ_REG(hw, EXTCNF_SIZE);
+        cnf_size = reg_data & E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH;
+        cnf_size >>= 16;
+        if (cnf_size) {
+            reg_data = E1000_READ_REG(hw, EXTCNF_CTRL);
+            cnf_base_addr = reg_data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER;
+            /* cnf_base_addr is in DWORD */
+            cnf_base_addr >>= 16;
+
+            /* Configure LCD from extended configuration region. */
+            ret_val = e1000_init_lcd_from_nvm_config_region(hw, cnf_base_addr,
+                                                            cnf_size);
+            if (ret_val)
+                return ret_val;
+        }
+    }
+
+    return E1000_SUCCESS;
+}
+
+
 
diff -urN linux-2.6.18-rc1/drivers/net/e1000/e1000_hw.h linux-2.6.18-rc2/drivers/net/e1000/e1000_hw.h
--- linux-2.6.18-rc1/drivers/net/e1000/e1000_hw.h	2006-07-15 22:34:42.560995710 +0000
+++ linux-2.6.18-rc2/drivers/net/e1000/e1000_hw.h	2006-07-15 22:34:47.829567604 +0000
@@ -62,6 +62,7 @@
     e1000_82572,
     e1000_82573,
     e1000_80003es2lan,
+    e1000_ich8lan,
     e1000_num_macs
 } e1000_mac_type;
 
@@ -70,6 +71,7 @@
     e1000_eeprom_spi,
     e1000_eeprom_microwire,
     e1000_eeprom_flash,
+    e1000_eeprom_ich8,
     e1000_eeprom_none, /* No NVM support */
     e1000_num_eeprom_types
 } e1000_eeprom_type;
@@ -98,6 +100,11 @@
     e1000_fc_default = 0xFF
 } e1000_fc_type;
 
+struct e1000_shadow_ram {
+    uint16_t    eeprom_word;
+    boolean_t   modified;
+};
+
 /* PCI bus types */
 typedef enum {
     e1000_bus_type_unknown = 0,
@@ -218,6 +225,8 @@
     e1000_phy_igp,
     e1000_phy_igp_2,
     e1000_phy_gg82563,
+    e1000_phy_igp_3,
+    e1000_phy_ife,
     e1000_phy_undefined = 0xFF
 } e1000_phy_type;
 
@@ -313,6 +322,10 @@
 int32_t e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data);
 int32_t e1000_phy_hw_reset(struct e1000_hw *hw);
 int32_t e1000_phy_reset(struct e1000_hw *hw);
+void e1000_phy_powerdown_workaround(struct e1000_hw *hw);
+int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw);
+int32_t e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, uint32_t cnf_base_addr, uint32_t cnf_size);
+int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw);
 int32_t e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
 int32_t e1000_validate_mdi_setting(struct e1000_hw *hw);
 int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *data);
@@ -331,6 +344,7 @@
 #define E1000_MNG_DHCP_COOKIE_OFFSET	0x6F0   /* Cookie offset */
 #define E1000_MNG_DHCP_COOKIE_LENGTH	0x10    /* Cookie length */
 #define E1000_MNG_IAMT_MODE		0x3
+#define E1000_MNG_ICH_IAMT_MODE         0x2
 #define E1000_IAMT_SIGNATURE            0x544D4149 /* Intel(R) Active Management Technology signature */
 
 #define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1 /* DHCP parsing enabled */
@@ -388,6 +402,8 @@
 int32_t e1000_read_mac_addr(struct e1000_hw * hw);
 int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask);
 void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask);
+void e1000_release_software_flag(struct e1000_hw *hw);
+int32_t e1000_get_software_flag(struct e1000_hw *hw);
 
 /* Filters (multicast, vlan, receive) */
 void e1000_mc_addr_list_update(struct e1000_hw *hw, uint8_t * mc_addr_list, uint32_t mc_addr_count, uint32_t pad, uint32_t rar_used_count);
@@ -401,6 +417,7 @@
 int32_t e1000_cleanup_led(struct e1000_hw *hw);
 int32_t e1000_led_on(struct e1000_hw *hw);
 int32_t e1000_led_off(struct e1000_hw *hw);
+int32_t e1000_blink_led_start(struct e1000_hw *hw);
 
 /* Adaptive IFS Functions */
 
@@ -422,6 +439,29 @@
 int32_t e1000_get_software_semaphore(struct e1000_hw *hw);
 void e1000_release_software_semaphore(struct e1000_hw *hw);
 int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
+int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop);
+
+int32_t e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index,
+                             uint8_t *data);
+int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index,
+                                     uint8_t byte);
+int32_t e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index,
+                              uint8_t byte);
+int32_t e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index,
+                             uint16_t *data);
+int32_t e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index,
+                             uint32_t size, uint16_t *data);
+int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset,
+                               uint16_t words, uint16_t *data);
+int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset,
+                                uint16_t words, uint16_t *data);
+int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment);
+
+
+#define E1000_READ_REG_IO(a, reg) \
+    e1000_read_reg_io((a), E1000_##reg)
+#define E1000_WRITE_REG_IO(a, reg, val) \
+    e1000_write_reg_io((a), E1000_##reg, val)
 
 /* PCI Device IDs */
 #define E1000_DEV_ID_82542               0x1000
@@ -446,6 +486,7 @@
 #define E1000_DEV_ID_82546EB_QUAD_COPPER 0x101D
 #define E1000_DEV_ID_82541EI             0x1013
 #define E1000_DEV_ID_82541EI_MOBILE      0x1018
+#define E1000_DEV_ID_82541ER_LOM         0x1014
 #define E1000_DEV_ID_82541ER             0x1078
 #define E1000_DEV_ID_82547GI             0x1075
 #define E1000_DEV_ID_82541GI             0x1076
@@ -457,18 +498,28 @@
 #define E1000_DEV_ID_82546GB_PCIE        0x108A
 #define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099
 #define E1000_DEV_ID_82547EI             0x1019
+#define E1000_DEV_ID_82547EI_MOBILE      0x101A
 #define E1000_DEV_ID_82571EB_COPPER      0x105E
 #define E1000_DEV_ID_82571EB_FIBER       0x105F
 #define E1000_DEV_ID_82571EB_SERDES      0x1060
 #define E1000_DEV_ID_82572EI_COPPER      0x107D
 #define E1000_DEV_ID_82572EI_FIBER       0x107E
 #define E1000_DEV_ID_82572EI_SERDES      0x107F
+#define E1000_DEV_ID_82572EI             0x10B9
 #define E1000_DEV_ID_82573E              0x108B
 #define E1000_DEV_ID_82573E_IAMT         0x108C
 #define E1000_DEV_ID_82573L              0x109A
 #define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5
 #define E1000_DEV_ID_80003ES2LAN_COPPER_DPT     0x1096
 #define E1000_DEV_ID_80003ES2LAN_SERDES_DPT     0x1098
+#define E1000_DEV_ID_80003ES2LAN_COPPER_SPT     0x10BA
+#define E1000_DEV_ID_80003ES2LAN_SERDES_SPT     0x10BB
+
+#define E1000_DEV_ID_ICH8_IGP_M_AMT      0x1049
+#define E1000_DEV_ID_ICH8_IGP_AMT        0x104A
+#define E1000_DEV_ID_ICH8_IGP_C          0x104B
+#define E1000_DEV_ID_ICH8_IFE            0x104C
+#define E1000_DEV_ID_ICH8_IGP_M          0x104D
 
 
 #define NODE_ADDRESS_SIZE 6
@@ -539,6 +590,14 @@
     E1000_IMS_RXSEQ  |    \
     E1000_IMS_LSC)
 
+/* Additional interrupts need to be handled for e1000_ich8lan:
+    DSW = The FW changed the status of the DISSW bit in FWSM
+    PHYINT = The LAN connected device generates an interrupt
+    EPRST = Manageability reset event */
+#define IMS_ICH8LAN_ENABLE_MASK (\
+    E1000_IMS_DSW   | \
+    E1000_IMS_PHYINT | \
+    E1000_IMS_EPRST)
 
 /* Number of high/low register pairs in the RAR. The RAR (Receive Address
  * Registers) holds the directed and multicast addresses that we monitor. We
@@ -546,6 +605,7 @@
  * E1000_RAR_ENTRIES - 1 multicast addresses.
  */
 #define E1000_RAR_ENTRIES 15
+#define E1000_RAR_ENTRIES_ICH8LAN  7
 
 #define MIN_NUMBER_OF_DESCRIPTORS 8
 #define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8
@@ -767,6 +827,9 @@
 #define E1000_MC_TBL_SIZE          128  /* Multicast Filter Table (4096 bits) */
 #define E1000_VLAN_FILTER_TBL_SIZE 128  /* VLAN Filter Table (4096 bits) */
 
+#define E1000_NUM_UNICAST_ICH8LAN  7
+#define E1000_MC_TBL_SIZE_ICH8LAN  32
+
 
 /* Receive Address Register */
 struct e1000_rar {
@@ -776,6 +839,7 @@
 
 /* Number of entries in the Multicast Table Array (MTA). */
 #define E1000_NUM_MTA_REGISTERS 128
+#define E1000_NUM_MTA_REGISTERS_ICH8LAN 32
 
 /* IPv4 Address Table Entry */
 struct e1000_ipv4_at_entry {
@@ -786,6 +850,7 @@
 /* Four wakeup IP addresses are supported */
 #define E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 4
 #define E1000_IP4AT_SIZE                  E1000_WAKEUP_IP_ADDRESS_COUNT_MAX
+#define E1000_IP4AT_SIZE_ICH8LAN          3
 #define E1000_IP6AT_SIZE                  1
 
 /* IPv6 Address Table Entry */
@@ -844,6 +909,7 @@
 #define E1000_FLA      0x0001C  /* Flash Access - RW */
 #define E1000_MDIC     0x00020  /* MDI Control - RW */
 #define E1000_SCTL     0x00024  /* SerDes Control - RW */
+#define E1000_FEXTNVM  0x00028  /* Future Extended NVM register */
 #define E1000_FCAL     0x00028  /* Flow Control Address Low - RW */
 #define E1000_FCAH     0x0002C  /* Flow Control Address High -RW */
 #define E1000_FCT      0x00030  /* Flow Control Type - RW */
@@ -872,6 +938,8 @@
 #define E1000_LEDCTL   0x00E00  /* LED Control - RW */
 #define E1000_EXTCNF_CTRL  0x00F00  /* Extended Configuration Control */
 #define E1000_EXTCNF_SIZE  0x00F08  /* Extended Configuration Size */
+#define E1000_PHY_CTRL     0x00F10  /* PHY Control Register in CSR */
+#define FEXTNVM_SW_CONFIG  0x0001
 #define E1000_PBA      0x01000  /* Packet Buffer Allocation - RW */
 #define E1000_PBS      0x01008  /* Packet Buffer Size */
 #define E1000_EEMNGCTL 0x01010  /* MNG EEprom Control */
@@ -899,11 +967,13 @@
 #define E1000_RDH0     E1000_RDH   /* RX Desc Head (0) - RW */
 #define E1000_RDT0     E1000_RDT   /* RX Desc Tail (0) - RW */
 #define E1000_RDTR0    E1000_RDTR  /* RX Delay Timer (0) - RW */
-#define E1000_RXDCTL   0x02828  /* RX Descriptor Control - RW */
+#define E1000_RXDCTL   0x02828  /* RX Descriptor Control queue 0 - RW */
+#define E1000_RXDCTL1  0x02928  /* RX Descriptor Control queue 1 - RW */
 #define E1000_RADV     0x0282C  /* RX Interrupt Absolute Delay Timer - RW */
 #define E1000_RSRPD    0x02C00  /* RX Small Packet Detect - RW */
 #define E1000_RAID     0x02C08  /* Receive Ack Interrupt Delay - RW */
 #define E1000_TXDMAC   0x03000  /* TX DMA Control - RW */
+#define E1000_KABGTXD  0x03004  /* AFE Band Gap Transmit Ref Data */
 #define E1000_TDFH     0x03410  /* TX Data FIFO Head - RW */
 #define E1000_TDFT     0x03418  /* TX Data FIFO Tail - RW */
 #define E1000_TDFHS    0x03420  /* TX Data FIFO Head Saved - RW */
@@ -1050,6 +1120,7 @@
 #define E1000_82542_FLA      E1000_FLA
 #define E1000_82542_MDIC     E1000_MDIC
 #define E1000_82542_SCTL     E1000_SCTL
+#define E1000_82542_FEXTNVM  E1000_FEXTNVM
 #define E1000_82542_FCAL     E1000_FCAL
 #define E1000_82542_FCAH     E1000_FCAH
 #define E1000_82542_FCT      E1000_FCT
@@ -1073,6 +1144,19 @@
 #define E1000_82542_RDLEN0   E1000_82542_RDLEN
 #define E1000_82542_RDH0     E1000_82542_RDH
 #define E1000_82542_RDT0     E1000_82542_RDT
+#define E1000_82542_SRRCTL(_n) (0x280C + ((_n) << 8)) /* Split and Replication
+                                                       * RX Control - RW */
+#define E1000_82542_DCA_RXCTRL(_n) (0x02814 + ((_n) << 8))
+#define E1000_82542_RDBAH3   0x02B04 /* RX Desc Base High Queue 3 - RW */
+#define E1000_82542_RDBAL3   0x02B00 /* RX Desc Low Queue 3 - RW */
+#define E1000_82542_RDLEN3   0x02B08 /* RX Desc Length Queue 3 - RW */
+#define E1000_82542_RDH3     0x02B10 /* RX Desc Head Queue 3 - RW */
+#define E1000_82542_RDT3     0x02B18 /* RX Desc Tail Queue 3 - RW */
+#define E1000_82542_RDBAL2   0x02A00 /* RX Desc Base Low Queue 2 - RW */
+#define E1000_82542_RDBAH2   0x02A04 /* RX Desc Base High Queue 2 - RW */
+#define E1000_82542_RDLEN2   0x02A08 /* RX Desc Length Queue 2 - RW */
+#define E1000_82542_RDH2     0x02A10 /* RX Desc Head Queue 2 - RW */
+#define E1000_82542_RDT2     0x02A18 /* RX Desc Tail Queue 2 - RW */
 #define E1000_82542_RDTR1    0x00130
 #define E1000_82542_RDBAL1   0x00138
 #define E1000_82542_RDBAH1   0x0013C
@@ -1110,11 +1194,14 @@
 #define E1000_82542_FLOP     E1000_FLOP
 #define E1000_82542_EXTCNF_CTRL  E1000_EXTCNF_CTRL
 #define E1000_82542_EXTCNF_SIZE  E1000_EXTCNF_SIZE
+#define E1000_82542_PHY_CTRL E1000_PHY_CTRL
 #define E1000_82542_ERT      E1000_ERT
 #define E1000_82542_RXDCTL   E1000_RXDCTL
+#define E1000_82542_RXDCTL1  E1000_RXDCTL1
 #define E1000_82542_RADV     E1000_RADV
 #define E1000_82542_RSRPD    E1000_RSRPD
 #define E1000_82542_TXDMAC   E1000_TXDMAC
+#define E1000_82542_KABGTXD  E1000_KABGTXD
 #define E1000_82542_TDFHS    E1000_TDFHS
 #define E1000_82542_TDFTS    E1000_TDFTS
 #define E1000_82542_TDFPC    E1000_TDFPC
@@ -1310,13 +1397,16 @@
 
 /* Structure containing variables used by the shared code (e1000_hw.c) */
 struct e1000_hw {
-    uint8_t __iomem *hw_addr;
+    uint8_t *hw_addr;
     uint8_t *flash_address;
     e1000_mac_type mac_type;
     e1000_phy_type phy_type;
     uint32_t phy_init_script;
     e1000_media_type media_type;
     void *back;
+    struct e1000_shadow_ram *eeprom_shadow_ram;
+    uint32_t flash_bank_size;
+    uint32_t flash_base_addr;
     e1000_fc_type fc;
     e1000_bus_speed bus_speed;
     e1000_bus_width bus_width;
@@ -1328,6 +1418,7 @@
     uint32_t asf_firmware_present;
     uint32_t eeprom_semaphore_present;
     uint32_t swfw_sync_present;
+    uint32_t swfwhw_semaphore_present;
     unsigned long io_base;
     uint32_t phy_id;
     uint32_t phy_revision;
@@ -1387,6 +1478,7 @@
     boolean_t in_ifs_mode;
     boolean_t mng_reg_access_disabled;
     boolean_t leave_av_bit_off;
+    boolean_t kmrn_lock_loss_workaround_disabled;
 };
 
 
@@ -1435,6 +1527,7 @@
 #define E1000_CTRL_RTE      0x20000000  /* Routing tag enable */
 #define E1000_CTRL_VME      0x40000000  /* IEEE VLAN mode enable */
 #define E1000_CTRL_PHY_RST  0x80000000  /* PHY Reset */
+#define E1000_CTRL_SW2FW_INT 0x02000000  /* Initiate an interrupt to manageability engine */
 
 /* Device Status */
 #define E1000_STATUS_FD         0x00000001      /* Full duplex.0=half,1=full */
@@ -1449,6 +1542,8 @@
 #define E1000_STATUS_SPEED_10   0x00000000      /* Speed 10Mb/s */
 #define E1000_STATUS_SPEED_100  0x00000040      /* Speed 100Mb/s */
 #define E1000_STATUS_SPEED_1000 0x00000080      /* Speed 1000Mb/s */
+#define E1000_STATUS_LAN_INIT_DONE 0x00000200   /* Lan Init Completion
+                                                   by EEPROM/Flash */
 #define E1000_STATUS_ASDV       0x00000300      /* Auto speed detect value */
 #define E1000_STATUS_DOCK_CI    0x00000800      /* Change in Dock/Undock state. Clear on write '0'. */
 #define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
@@ -1506,6 +1601,10 @@
 #define E1000_STM_OPCODE     0xDB00
 #define E1000_HICR_FW_RESET  0xC0
 
+#define E1000_SHADOW_RAM_WORDS     2048
+#define E1000_ICH8_NVM_SIG_WORD    0x13
+#define E1000_ICH8_NVM_SIG_MASK    0xC0
+
 /* EEPROM Read */
 #define E1000_EERD_START      0x00000001 /* Start Read */
 #define E1000_EERD_DONE       0x00000010 /* Read Done */
@@ -1551,7 +1650,6 @@
 #define E1000_CTRL_EXT_WR_WMARK_320   0x01000000
 #define E1000_CTRL_EXT_WR_WMARK_384   0x02000000
 #define E1000_CTRL_EXT_WR_WMARK_448   0x03000000
-#define E1000_CTRL_EXT_CANC           0x04000000  /* Interrupt delay cancellation */
 #define E1000_CTRL_EXT_DRV_LOAD       0x10000000  /* Driver loaded bit for FW */
 #define E1000_CTRL_EXT_IAME           0x08000000  /* Interrupt acknowledge Auto-mask */
 #define E1000_CTRL_EXT_INT_TIMER_CLR  0x20000000  /* Clear Interrupt timers after IMS clear */
@@ -1591,12 +1689,31 @@
 #define E1000_KUMCTRLSTA_FIFO_CTRL_TX_BYPASS   0x00000800
 
 /* In-Band Control */
+#define E1000_KUMCTRLSTA_INB_CTRL_LINK_STATUS_TX_TIMEOUT_DEFAULT    0x00000500
 #define E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING  0x00000010
 
 /* Half-Duplex Control */
 #define E1000_KUMCTRLSTA_HD_CTRL_10_100_DEFAULT 0x00000004
 #define E1000_KUMCTRLSTA_HD_CTRL_1000_DEFAULT  0x00000000
 
+#define E1000_KUMCTRLSTA_OFFSET_K0S_CTRL       0x0000001E
+
+#define E1000_KUMCTRLSTA_DIAG_FELPBK           0x2000
+#define E1000_KUMCTRLSTA_DIAG_NELPBK           0x1000
+
+#define E1000_KUMCTRLSTA_K0S_100_EN            0x2000
+#define E1000_KUMCTRLSTA_K0S_GBE_EN            0x1000
+#define E1000_KUMCTRLSTA_K0S_ENTRY_LATENCY_MASK   0x0003
+
+#define E1000_KABGTXD_BGSQLBIAS                0x00050000
+
+#define E1000_PHY_CTRL_SPD_EN                  0x00000001
+#define E1000_PHY_CTRL_D0A_LPLU                0x00000002
+#define E1000_PHY_CTRL_NOND0A_LPLU             0x00000004
+#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE      0x00000008
+#define E1000_PHY_CTRL_GBE_DISABLE             0x00000040
+#define E1000_PHY_CTRL_B2B_EN                  0x00000080
+
 /* LED Control */
 #define E1000_LEDCTL_LED0_MODE_MASK       0x0000000F
 #define E1000_LEDCTL_LED0_MODE_SHIFT      0
@@ -1666,6 +1783,9 @@
 #define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* queue 1 Rx descriptor FIFO parity error */
 #define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* queue 1 Tx descriptor FIFO parity error */
 #define E1000_ICR_ALL_PARITY    0x03F00000 /* all parity error bits */
+#define E1000_ICR_DSW           0x00000020 /* FW changed the status of DISSW bit in the FWSM */
+#define E1000_ICR_PHYINT        0x00001000 /* LAN connected device generates an interrupt */
+#define E1000_ICR_EPRST         0x00100000 /* ME handware reset occurs */
 
 /* Interrupt Cause Set */
 #define E1000_ICS_TXDW      E1000_ICR_TXDW      /* Transmit desc written back */
@@ -1692,6 +1812,9 @@
 #define E1000_ICS_PB_PAR        E1000_ICR_PB_PAR        /* packet buffer parity error */
 #define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
 #define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_ICS_DSW       E1000_ICR_DSW
+#define E1000_ICS_PHYINT    E1000_ICR_PHYINT
+#define E1000_ICS_EPRST     E1000_ICR_EPRST
 
 /* Interrupt Mask Set */
 #define E1000_IMS_TXDW      E1000_ICR_TXDW      /* Transmit desc written back */
@@ -1718,6 +1841,9 @@
 #define E1000_IMS_PB_PAR        E1000_ICR_PB_PAR        /* packet buffer parity error */
 #define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
 #define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_IMS_DSW       E1000_ICR_DSW
+#define E1000_IMS_PHYINT    E1000_ICR_PHYINT
+#define E1000_IMS_EPRST     E1000_ICR_EPRST
 
 /* Interrupt Mask Clear */
 #define E1000_IMC_TXDW      E1000_ICR_TXDW      /* Transmit desc written back */
@@ -1744,6 +1870,9 @@
 #define E1000_IMC_PB_PAR        E1000_ICR_PB_PAR        /* packet buffer parity error */
 #define E1000_IMC_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
 #define E1000_IMC_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_IMC_DSW       E1000_ICR_DSW
+#define E1000_IMC_PHYINT    E1000_ICR_PHYINT
+#define E1000_IMC_EPRST     E1000_ICR_EPRST
 
 /* Receive Control */
 #define E1000_RCTL_RST            0x00000001    /* Software reset */
@@ -1918,9 +2047,10 @@
 #define E1000_MRQC_RSS_FIELD_MASK           0xFFFF0000
 #define E1000_MRQC_RSS_FIELD_IPV4_TCP       0x00010000
 #define E1000_MRQC_RSS_FIELD_IPV4           0x00020000
-#define E1000_MRQC_RSS_FIELD_IPV6_TCP       0x00040000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX    0x00040000
 #define E1000_MRQC_RSS_FIELD_IPV6_EX        0x00080000
 #define E1000_MRQC_RSS_FIELD_IPV6           0x00100000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP       0x00200000
 
 /* Definitions for power management and wakeup registers */
 /* Wake Up Control */
@@ -2010,6 +2140,15 @@
 #define E1000_FWSM_MODE_SHIFT            1
 #define E1000_FWSM_FW_VALID     0x00008000 /* FW established a valid mode */
 
+#define E1000_FWSM_RSPCIPHY        0x00000040 /* Reset PHY on PCI reset */
+#define E1000_FWSM_DISSW           0x10000000 /* FW disable SW Write Access */
+#define E1000_FWSM_SKUSEL_MASK     0x60000000 /* LAN SKU select */
+#define E1000_FWSM_SKUEL_SHIFT     29
+#define E1000_FWSM_SKUSEL_EMB      0x0 /* Embedded SKU */
+#define E1000_FWSM_SKUSEL_CONS     0x1 /* Consumer SKU */
+#define E1000_FWSM_SKUSEL_PERF_100 0x2 /* Perf & Corp 10/100 SKU */
+#define E1000_FWSM_SKUSEL_PERF_GBE 0x3 /* Perf & Copr GbE SKU */
+
 /* FFLT Debug Register */
 #define E1000_FFLT_DBG_INVC     0x00100000 /* Invalid /C/ code handling */
 
@@ -2082,6 +2221,8 @@
                              E1000_GCR_TXDSCW_NO_SNOOP      | \
                              E1000_GCR_TXDSCR_NO_SNOOP)
 
+#define PCI_EX_82566_SNOOP_ALL PCI_EX_NO_SNOOP_ALL
+
 #define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
 /* Function Active and Power State to MNG */
 #define E1000_FACTPS_FUNC0_POWER_STATE_MASK         0x00000003
@@ -2140,8 +2281,10 @@
 #define EEPROM_PHY_CLASS_WORD         0x0007
 #define EEPROM_INIT_CONTROL1_REG      0x000A
 #define EEPROM_INIT_CONTROL2_REG      0x000F
+#define EEPROM_SWDEF_PINS_CTRL_PORT_1 0x0010
 #define EEPROM_INIT_CONTROL3_PORT_B   0x0014
 #define EEPROM_INIT_3GIO_3            0x001A
+#define EEPROM_SWDEF_PINS_CTRL_PORT_0 0x0020
 #define EEPROM_INIT_CONTROL3_PORT_A   0x0024
 #define EEPROM_CFG                    0x0012
 #define EEPROM_FLASH_VERSION          0x0032
@@ -2153,10 +2296,16 @@
 /* Word definitions for ID LED Settings */
 #define ID_LED_RESERVED_0000 0x0000
 #define ID_LED_RESERVED_FFFF 0xFFFF
+#define ID_LED_RESERVED_82573  0xF746
+#define ID_LED_DEFAULT_82573   0x1811
 #define ID_LED_DEFAULT       ((ID_LED_OFF1_ON2 << 12) | \
                               (ID_LED_OFF1_OFF2 << 8) | \
                               (ID_LED_DEF1_DEF2 << 4) | \
                               (ID_LED_DEF1_DEF2))
+#define ID_LED_DEFAULT_ICH8LAN  ((ID_LED_DEF1_DEF2 << 12) | \
+                                 (ID_LED_DEF1_OFF2 <<  8) | \
+                                 (ID_LED_DEF1_ON2  <<  4) | \
+                                 (ID_LED_DEF1_DEF2))
 #define ID_LED_DEF1_DEF2     0x1
 #define ID_LED_DEF1_ON2      0x2
 #define ID_LED_DEF1_OFF2     0x3
@@ -2191,6 +2340,11 @@
 #define EEPROM_WORD0F_ASM_DIR    0x2000
 #define EEPROM_WORD0F_ANE        0x0800
 #define EEPROM_WORD0F_SWPDIO_EXT 0x00F0
+#define EEPROM_WORD0F_LPLU       0x0001
+
+/* Mask bits for fields in Word 0x10/0x20 of the EEPROM */
+#define EEPROM_WORD1020_GIGA_DISABLE         0x0010
+#define EEPROM_WORD1020_GIGA_DISABLE_NON_D0A 0x0008
 
 /* Mask bits for fields in Word 0x1a of the EEPROM */
 #define EEPROM_WORD1A_ASPM_MASK  0x000C
@@ -2265,23 +2419,29 @@
 #define E1000_EXTCNF_CTRL_D_UD_OWNER        0x00000010
 #define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020
 #define E1000_EXTCNF_CTRL_MDIO_HW_OWNERSHIP 0x00000040
-#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER   0x1FFF0000
+#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER   0x0FFF0000
 
 #define E1000_EXTCNF_SIZE_EXT_PHY_LENGTH    0x000000FF
 #define E1000_EXTCNF_SIZE_EXT_DOCK_LENGTH   0x0000FF00
 #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH   0x00FF0000
+#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE  0x00000001
+#define E1000_EXTCNF_CTRL_SWFLAG            0x00000020
 
 /* PBA constants */
+#define E1000_PBA_8K 0x0008    /* 8KB, default Rx allocation */
 #define E1000_PBA_12K 0x000C    /* 12KB, default Rx allocation */
 #define E1000_PBA_16K 0x0010    /* 16KB, default TX allocation */
 #define E1000_PBA_22K 0x0016
 #define E1000_PBA_24K 0x0018
 #define E1000_PBA_30K 0x001E
 #define E1000_PBA_32K 0x0020
+#define E1000_PBA_34K 0x0022
 #define E1000_PBA_38K 0x0026
 #define E1000_PBA_40K 0x0028
 #define E1000_PBA_48K 0x0030    /* 48KB, default RX allocation */
 
+#define E1000_PBS_16K E1000_PBA_16K
+
 /* Flow Control Constants */
 #define FLOW_CONTROL_ADDRESS_LOW  0x00C28001
 #define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
@@ -2336,7 +2496,7 @@
 /* Number of milliseconds we wait for Eeprom auto read bit done after MAC reset */
 #define AUTO_READ_DONE_TIMEOUT      10
 /* Number of milliseconds we wait for PHY configuration done after MAC reset */
-#define PHY_CFG_TIMEOUT             40
+#define PHY_CFG_TIMEOUT             100
 
 #define E1000_TX_BUFFER_SIZE ((uint32_t)1514)
 
@@ -2764,6 +2924,17 @@
 #define M88E1000_EPSCR_TX_CLK_25      0x0070 /* 25  MHz TX_CLK */
 #define M88E1000_EPSCR_TX_CLK_0       0x0000 /* NO  TX_CLK */
 
+/* M88EC018 Rev 2 specific DownShift settings */
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK  0x0E00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_1X    0x0000
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_2X    0x0200
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_3X    0x0400
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_4X    0x0600
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X    0x0800
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_6X    0x0A00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_7X    0x0C00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_8X    0x0E00
+
 /* IGP01E1000 Specific Port Config Register - R/W */
 #define IGP01E1000_PSCFR_AUTO_MDIX_PAR_DETECT  0x0010
 #define IGP01E1000_PSCFR_PRE_EN                0x0020
@@ -2990,6 +3161,221 @@
 #define L1LXT971A_PHY_ID   0x001378E0
 #define GG82563_E_PHY_ID   0x01410CA0
 
+
+/* Bits...
+ * 15-5: page
+ * 4-0: register offset
+ */
+#define PHY_PAGE_SHIFT        5
+#define PHY_REG(page, reg)    \
+        (((page) << PHY_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
+
+#define IGP3_PHY_PORT_CTRL           \
+        PHY_REG(769, 17) /* Port General Configuration */
+#define IGP3_PHY_RATE_ADAPT_CTRL \
+        PHY_REG(769, 25) /* Rate Adapter Control Register */
+
+#define IGP3_KMRN_FIFO_CTRL_STATS \
+        PHY_REG(770, 16) /* KMRN FIFO's control/status register */
+#define IGP3_KMRN_POWER_MNG_CTRL \
+        PHY_REG(770, 17) /* KMRN Power Management Control Register */
+#define IGP3_KMRN_INBAND_CTRL \
+        PHY_REG(770, 18) /* KMRN Inband Control Register */
+#define IGP3_KMRN_DIAG \
+        PHY_REG(770, 19) /* KMRN Diagnostic register */
+#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 /* RX PCS is not synced */
+#define IGP3_KMRN_ACK_TIMEOUT \
+        PHY_REG(770, 20) /* KMRN Acknowledge Timeouts register */
+
+#define IGP3_VR_CTRL \
+        PHY_REG(776, 18) /* Voltage regulator control register */
+#define IGP3_VR_CTRL_MODE_SHUT       0x0200 /* Enter powerdown, shutdown VRs */
+
+#define IGP3_CAPABILITY \
+        PHY_REG(776, 19) /* IGP3 Capability Register */
+
+/* Capabilities for SKU Control  */
+#define IGP3_CAP_INITIATE_TEAM       0x0001 /* Able to initiate a team */
+#define IGP3_CAP_WFM                 0x0002 /* Support WoL and PXE */
+#define IGP3_CAP_ASF                 0x0004 /* Support ASF */
+#define IGP3_CAP_LPLU                0x0008 /* Support Low Power Link Up */
+#define IGP3_CAP_DC_AUTO_SPEED       0x0010 /* Support AC/DC Auto Link Speed */
+#define IGP3_CAP_SPD                 0x0020 /* Support Smart Power Down */
+#define IGP3_CAP_MULT_QUEUE          0x0040 /* Support 2 tx & 2 rx queues */
+#define IGP3_CAP_RSS                 0x0080 /* Support RSS */
+#define IGP3_CAP_8021PQ              0x0100 /* Support 802.1Q & 802.1p */
+#define IGP3_CAP_AMT_CB              0x0200 /* Support active manageability and circuit breaker */
+
+#define IGP3_PPC_JORDAN_EN           0x0001
+#define IGP3_PPC_JORDAN_GIGA_SPEED   0x0002
+
+#define IGP3_KMRN_PMC_EE_IDLE_LINK_DIS         0x0001
+#define IGP3_KMRN_PMC_K0S_ENTRY_LATENCY_MASK   0x001E
+#define IGP3_KMRN_PMC_K0S_MODE1_EN_GIGA        0x0020
+#define IGP3_KMRN_PMC_K0S_MODE1_EN_100         0x0040
+
+#define IGP3E1000_PHY_MISC_CTRL                0x1B   /* Misc. Ctrl register */
+#define IGP3_PHY_MISC_DUPLEX_MANUAL_SET        0x1000 /* Duplex Manual Set */
+
+#define IGP3_KMRN_EXT_CTRL  PHY_REG(770, 18)
+#define IGP3_KMRN_EC_DIS_INBAND    0x0080
+
+#define IGP03E1000_E_PHY_ID  0x02A80390
+#define IFE_E_PHY_ID         0x02A80330 /* 10/100 PHY */
+#define IFE_PLUS_E_PHY_ID    0x02A80320
+#define IFE_C_E_PHY_ID       0x02A80310
+
+#define IFE_PHY_EXTENDED_STATUS_CONTROL   0x10  /* 100BaseTx Extended Status, Control and Address */
+#define IFE_PHY_SPECIAL_CONTROL           0x11  /* 100BaseTx PHY special control register */
+#define IFE_PHY_RCV_FALSE_CARRIER         0x13  /* 100BaseTx Receive False Carrier Counter */
+#define IFE_PHY_RCV_DISCONNECT            0x14  /* 100BaseTx Receive Disconnet Counter */
+#define IFE_PHY_RCV_ERROT_FRAME           0x15  /* 100BaseTx Receive Error Frame Counter */
+#define IFE_PHY_RCV_SYMBOL_ERR            0x16  /* Receive Symbol Error Counter */
+#define IFE_PHY_PREM_EOF_ERR              0x17  /* 100BaseTx Receive Premature End Of Frame Error Counter */
+#define IFE_PHY_RCV_EOF_ERR               0x18  /* 10BaseT Receive End Of Frame Error Counter */
+#define IFE_PHY_TX_JABBER_DETECT          0x19  /* 10BaseT Transmit Jabber Detect Counter */
+#define IFE_PHY_EQUALIZER                 0x1A  /* PHY Equalizer Control and Status */
+#define IFE_PHY_SPECIAL_CONTROL_LED       0x1B  /* PHY special control and LED configuration */
+#define IFE_PHY_MDIX_CONTROL              0x1C  /* MDI/MDI-X Control register */
+#define IFE_PHY_HWI_CONTROL               0x1D  /* Hardware Integrity Control (HWI) */
+
+#define IFE_PESC_REDUCED_POWER_DOWN_DISABLE  0x2000  /* Defaut 1 = Disable auto reduced power down */
+#define IFE_PESC_100BTX_POWER_DOWN           0x0400  /* Indicates the power state of 100BASE-TX */
+#define IFE_PESC_10BTX_POWER_DOWN            0x0200  /* Indicates the power state of 10BASE-T */
+#define IFE_PESC_POLARITY_REVERSED           0x0100  /* Indicates 10BASE-T polarity */
+#define IFE_PESC_PHY_ADDR_MASK               0x007C  /* Bit 6:2 for sampled PHY address */
+#define IFE_PESC_SPEED                       0x0002  /* Auto-negotiation speed result 1=100Mbs, 0=10Mbs */
+#define IFE_PESC_DUPLEX                      0x0001  /* Auto-negotiation duplex result 1=Full, 0=Half */
+#define IFE_PESC_POLARITY_REVERSED_SHIFT     8
+
+#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN   0x0100  /* 1 = Dyanmic Power Down disabled */
+#define IFE_PSC_FORCE_POLARITY               0x0020  /* 1=Reversed Polarity, 0=Normal */
+#define IFE_PSC_AUTO_POLARITY_DISABLE        0x0010  /* 1=Auto Polarity Disabled, 0=Enabled */
+#define IFE_PSC_JABBER_FUNC_DISABLE          0x0001  /* 1=Jabber Disabled, 0=Normal Jabber Operation */
+#define IFE_PSC_FORCE_POLARITY_SHIFT         5
+#define IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT  4
+
+#define IFE_PMC_AUTO_MDIX                    0x0080  /* 1=enable MDI/MDI-X feature, default 0=disabled */
+#define IFE_PMC_FORCE_MDIX                   0x0040  /* 1=force MDIX-X, 0=force MDI */
+#define IFE_PMC_MDIX_STATUS                  0x0020  /* 1=MDI-X, 0=MDI */
+#define IFE_PMC_AUTO_MDIX_COMPLETE           0x0010  /* Resolution algorthm is completed */
+#define IFE_PMC_MDIX_MODE_SHIFT              6
+#define IFE_PHC_MDIX_RESET_ALL_MASK          0x0000  /* Disable auto MDI-X */
+
+#define IFE_PHC_HWI_ENABLE                   0x8000  /* Enable the HWI feature */
+#define IFE_PHC_ABILITY_CHECK                0x4000  /* 1= Test Passed, 0=failed */
+#define IFE_PHC_TEST_EXEC                    0x2000  /* PHY launch test pulses on the wire */
+#define IFE_PHC_HIGHZ                        0x0200  /* 1 = Open Circuit */
+#define IFE_PHC_LOWZ                         0x0400  /* 1 = Short Circuit */
+#define IFE_PHC_LOW_HIGH_Z_MASK              0x0600  /* Mask for indication type of problem on the line */
+#define IFE_PHC_DISTANCE_MASK                0x01FF  /* Mask for distance to the cable problem, in 80cm granularity */
+#define IFE_PHC_RESET_ALL_MASK               0x0000  /* Disable HWI */
+#define IFE_PSCL_PROBE_MODE                  0x0020  /* LED Probe mode */
+#define IFE_PSCL_PROBE_LEDS_OFF              0x0006  /* Force LEDs 0 and 2 off */
+#define IFE_PSCL_PROBE_LEDS_ON               0x0007  /* Force LEDs 0 and 2 on */
+
+#define ICH8_FLASH_COMMAND_TIMEOUT           500   /* 500 ms , should be adjusted */
+#define ICH8_FLASH_CYCLE_REPEAT_COUNT        10    /* 10 cycles , should be adjusted */
+#define ICH8_FLASH_SEG_SIZE_256              256
+#define ICH8_FLASH_SEG_SIZE_4K               4096
+#define ICH8_FLASH_SEG_SIZE_64K              65536
+
+#define ICH8_CYCLE_READ                      0x0
+#define ICH8_CYCLE_RESERVED                  0x1
+#define ICH8_CYCLE_WRITE                     0x2
+#define ICH8_CYCLE_ERASE                     0x3
+
+#define ICH8_FLASH_GFPREG   0x0000
+#define ICH8_FLASH_HSFSTS   0x0004
+#define ICH8_FLASH_HSFCTL   0x0006
+#define ICH8_FLASH_FADDR    0x0008
+#define ICH8_FLASH_FDATA0   0x0010
+#define ICH8_FLASH_FRACC    0x0050
+#define ICH8_FLASH_FREG0    0x0054
+#define ICH8_FLASH_FREG1    0x0058
+#define ICH8_FLASH_FREG2    0x005C
+#define ICH8_FLASH_FREG3    0x0060
+#define ICH8_FLASH_FPR0     0x0074
+#define ICH8_FLASH_FPR1     0x0078
+#define ICH8_FLASH_SSFSTS   0x0090
+#define ICH8_FLASH_SSFCTL   0x0092
+#define ICH8_FLASH_PREOP    0x0094
+#define ICH8_FLASH_OPTYPE   0x0096
+#define ICH8_FLASH_OPMENU   0x0098
+
+#define ICH8_FLASH_REG_MAPSIZE      0x00A0
+#define ICH8_FLASH_SECTOR_SIZE      4096
+#define ICH8_GFPREG_BASE_MASK       0x1FFF
+#define ICH8_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF
+
+/* ICH8 GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
+/* Offset 04h HSFSTS */
+union ich8_hws_flash_status {
+    struct ich8_hsfsts {
+#ifdef E1000_BIG_ENDIAN
+        uint16_t reserved2      :6;
+        uint16_t fldesvalid     :1;
+        uint16_t flockdn        :1;
+        uint16_t flcdone        :1;
+        uint16_t flcerr         :1;
+        uint16_t dael           :1;
+        uint16_t berasesz       :2;
+        uint16_t flcinprog      :1;
+        uint16_t reserved1      :2;
+#else
+        uint16_t flcdone        :1;   /* bit 0 Flash Cycle Done */
+        uint16_t flcerr         :1;   /* bit 1 Flash Cycle Error */
+        uint16_t dael           :1;   /* bit 2 Direct Access error Log */
+        uint16_t berasesz       :2;   /* bit 4:3 Block/Sector Erase Size */
+        uint16_t flcinprog      :1;   /* bit 5 flash SPI cycle in Progress */
+        uint16_t reserved1      :2;   /* bit 13:6 Reserved */
+        uint16_t reserved2      :6;   /* bit 13:6 Reserved */
+        uint16_t fldesvalid     :1;   /* bit 14 Flash Descriptor Valid */
+        uint16_t flockdn        :1;   /* bit 15 Flash Configuration Lock-Down */
+#endif
+    } hsf_status;
+    uint16_t regval;
+};
+
+/* ICH8 GbE Flash Hardware Sequencing Flash control Register bit breakdown */
+/* Offset 06h FLCTL */
+union ich8_hws_flash_ctrl {
+    struct ich8_hsflctl {
+#ifdef E1000_BIG_ENDIAN
+        uint16_t fldbcount      :2;
+        uint16_t flockdn        :6;
+        uint16_t flcgo          :1;
+        uint16_t flcycle        :2;
+        uint16_t reserved       :5;
+#else
+        uint16_t flcgo          :1;   /* 0 Flash Cycle Go */
+        uint16_t flcycle        :2;   /* 2:1 Flash Cycle */
+        uint16_t reserved       :5;   /* 7:3 Reserved  */
+        uint16_t fldbcount      :2;   /* 9:8 Flash Data Byte Count */
+        uint16_t flockdn        :6;   /* 15:10 Reserved */
+#endif
+    } hsf_ctrl;
+    uint16_t regval;
+};
+
+/* ICH8 Flash Region Access Permissions */
+union ich8_hws_flash_regacc {
+    struct ich8_flracc {
+#ifdef E1000_BIG_ENDIAN
+        uint32_t gmwag          :8;
+        uint32_t gmrag          :8;
+        uint32_t grwa           :8;
+        uint32_t grra           :8;
+#else
+        uint32_t grra           :8;   /* 0:7 GbE region Read Access */
+        uint32_t grwa           :8;   /* 8:15 GbE region Write Access */
+        uint32_t gmrag          :8;   /* 23:16 GbE Master Read Access Grant  */
+        uint32_t gmwag          :8;   /* 31:24 GbE Master Write Access Grant */
+#endif
+    } hsf_flregacc;
+    uint16_t regval;
+};
+
 /* Miscellaneous PHY bit definitions. */
 #define PHY_PREAMBLE        0xFFFFFFFF
 #define PHY_SOF             0x01
diff -urN linux-2.6.18-rc1/drivers/net/e1000/e1000_main.c linux-2.6.18-rc2/drivers/net/e1000/e1000_main.c
--- linux-2.6.18-rc1/drivers/net/e1000/e1000_main.c	2006-07-15 22:34:42.560995710 +0000
+++ linux-2.6.18-rc2/drivers/net/e1000/e1000_main.c	2006-07-15 22:34:47.829567604 +0000
@@ -36,7 +36,7 @@
 #else
 #define DRIVERNAPI "-NAPI"
 #endif
-#define DRV_VERSION "7.0.38-k4"DRIVERNAPI
+#define DRV_VERSION "7.1.9-k2"DRIVERNAPI
 char e1000_driver_version[] = DRV_VERSION;
 static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
 
@@ -73,6 +73,11 @@
 	INTEL_E1000_ETHERNET_DEVICE(0x1026),
 	INTEL_E1000_ETHERNET_DEVICE(0x1027),
 	INTEL_E1000_ETHERNET_DEVICE(0x1028),
+	INTEL_E1000_ETHERNET_DEVICE(0x1049),
+	INTEL_E1000_ETHERNET_DEVICE(0x104A),
+	INTEL_E1000_ETHERNET_DEVICE(0x104B),
+	INTEL_E1000_ETHERNET_DEVICE(0x104C),
+	INTEL_E1000_ETHERNET_DEVICE(0x104D),
 	INTEL_E1000_ETHERNET_DEVICE(0x105E),
 	INTEL_E1000_ETHERNET_DEVICE(0x105F),
 	INTEL_E1000_ETHERNET_DEVICE(0x1060),
@@ -96,6 +101,8 @@
 	INTEL_E1000_ETHERNET_DEVICE(0x109A),
 	INTEL_E1000_ETHERNET_DEVICE(0x10B5),
 	INTEL_E1000_ETHERNET_DEVICE(0x10B9),
+	INTEL_E1000_ETHERNET_DEVICE(0x10BA),
+	INTEL_E1000_ETHERNET_DEVICE(0x10BB),
 	/* required last entry */
 	{0,}
 };
@@ -133,7 +140,6 @@
 static void e1000_set_multi(struct net_device *netdev);
 static void e1000_update_phy_info(unsigned long data);
 static void e1000_watchdog(unsigned long data);
-static void e1000_watchdog_task(struct e1000_adapter *adapter);
 static void e1000_82547_tx_fifo_stall(unsigned long data);
 static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
 static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
@@ -178,8 +184,8 @@
 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
 static void e1000_restore_vlan(struct e1000_adapter *adapter);
 
-#ifdef CONFIG_PM
 static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
+#ifdef CONFIG_PM
 static int e1000_resume(struct pci_dev *pdev);
 #endif
 static void e1000_shutdown(struct pci_dev *pdev);
@@ -206,8 +212,8 @@
 	.probe    = e1000_probe,
 	.remove   = __devexit_p(e1000_remove),
 	/* Power Managment Hooks */
-#ifdef CONFIG_PM
 	.suspend  = e1000_suspend,
+#ifdef CONFIG_PM
 	.resume   = e1000_resume,
 #endif
 	.shutdown = e1000_shutdown,
@@ -261,6 +267,44 @@
 
 module_exit(e1000_exit_module);
 
+static int e1000_request_irq(struct e1000_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	int flags, err = 0;
+
+	flags = IRQF_SHARED;
+#ifdef CONFIG_PCI_MSI
+	if (adapter->hw.mac_type > e1000_82547_rev_2) {
+		adapter->have_msi = TRUE;
+		if ((err = pci_enable_msi(adapter->pdev))) {
+			DPRINTK(PROBE, ERR,
+			 "Unable to allocate MSI interrupt Error: %d\n", err);
+			adapter->have_msi = FALSE;
+		}
+	}
+	if (adapter->have_msi)
+		flags &= ~IRQF_SHARED;
+#endif
+	if ((err = request_irq(adapter->pdev->irq, &e1000_intr, flags,
+	                       netdev->name, netdev)))
+		DPRINTK(PROBE, ERR,
+		        "Unable to allocate interrupt Error: %d\n", err);
+
+	return err;
+}
+
+static void e1000_free_irq(struct e1000_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+
+	free_irq(adapter->pdev->irq, netdev);
+
+#ifdef CONFIG_PCI_MSI
+	if (adapter->have_msi)
+		pci_disable_msi(adapter->pdev);
+#endif
+}
+
 /**
  * e1000_irq_disable - Mask off interrupt generation on the NIC
  * @adapter: board private structure
@@ -329,6 +373,7 @@
 {
 	uint32_t ctrl_ext;
 	uint32_t swsm;
+	uint32_t extcnf;
 
 	/* Let firmware taken over control of h/w */
 	switch (adapter->hw.mac_type) {
@@ -343,6 +388,11 @@
 		swsm = E1000_READ_REG(&adapter->hw, SWSM);
 		E1000_WRITE_REG(&adapter->hw, SWSM,
 				swsm & ~E1000_SWSM_DRV_LOAD);
+	case e1000_ich8lan:
+		extcnf = E1000_READ_REG(&adapter->hw, CTRL_EXT);
+		E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
+				extcnf & ~E1000_CTRL_EXT_DRV_LOAD);
+		break;
 	default:
 		break;
 	}
@@ -364,6 +414,7 @@
 {
 	uint32_t ctrl_ext;
 	uint32_t swsm;
+	uint32_t extcnf;
 	/* Let firmware know the driver has taken over */
 	switch (adapter->hw.mac_type) {
 	case e1000_82571:
@@ -378,6 +429,11 @@
 		E1000_WRITE_REG(&adapter->hw, SWSM,
 				swsm | E1000_SWSM_DRV_LOAD);
 		break;
+	case e1000_ich8lan:
+		extcnf = E1000_READ_REG(&adapter->hw, EXTCNF_CTRL);
+		E1000_WRITE_REG(&adapter->hw, EXTCNF_CTRL,
+				extcnf | E1000_EXTCNF_CTRL_SWFLAG);
+		break;
 	default:
 		break;
 	}
@@ -387,18 +443,10 @@
 e1000_up(struct e1000_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
-	int i, err;
+	int i;
 
 	/* hardware has been reset, we need to reload some things */
 
-	/* Reset the PHY if it was previously powered down */
-	if (adapter->hw.media_type == e1000_media_type_copper) {
-		uint16_t mii_reg;
-		e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
-		if (mii_reg & MII_CR_POWER_DOWN)
-			e1000_phy_hw_reset(&adapter->hw);
-	}
-
 	e1000_set_multi(netdev);
 
 	e1000_restore_vlan(adapter);
@@ -415,24 +463,6 @@
 		                      E1000_DESC_UNUSED(ring));
 	}
 
-#ifdef CONFIG_PCI_MSI
-	if (adapter->hw.mac_type > e1000_82547_rev_2) {
-		adapter->have_msi = TRUE;
-		if ((err = pci_enable_msi(adapter->pdev))) {
-			DPRINTK(PROBE, ERR,
-			 "Unable to allocate MSI interrupt Error: %d\n", err);
-			adapter->have_msi = FALSE;
-		}
-	}
-#endif
-	if ((err = request_irq(adapter->pdev->irq, &e1000_intr,
-		              IRQF_SHARED | IRQF_SAMPLE_RANDOM,
-		              netdev->name, netdev))) {
-		DPRINTK(PROBE, ERR,
-		    "Unable to allocate interrupt Error: %d\n", err);
-		return err;
-	}
-
 	adapter->tx_queue_len = netdev->tx_queue_len;
 
 	mod_timer(&adapter->watchdog_timer, jiffies);
@@ -445,21 +475,60 @@
 	return 0;
 }
 
+/**
+ * e1000_power_up_phy - restore link in case the phy was powered down
+ * @adapter: address of board private structure
+ *
+ * The phy may be powered down to save power and turn off link when the
+ * driver is unloaded and wake on lan is not enabled (among others)
+ * *** this routine MUST be followed by a call to e1000_reset ***
+ *
+ **/
+
+static void e1000_power_up_phy(struct e1000_adapter *adapter)
+{
+	uint16_t mii_reg = 0;
+
+	/* Just clear the power down bit to wake the phy back up */
+	if (adapter->hw.media_type == e1000_media_type_copper) {
+		/* according to the manual, the phy will retain its
+		 * settings across a power-down/up cycle */
+		e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
+		mii_reg &= ~MII_CR_POWER_DOWN;
+		e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
+	}
+}
+
+static void e1000_power_down_phy(struct e1000_adapter *adapter)
+{
+	boolean_t mng_mode_enabled = (adapter->hw.mac_type >= e1000_82571) &&
+	                              e1000_check_mng_mode(&adapter->hw);
+	/* Power down the PHY so no link is implied when interface is down
+	 * The PHY cannot be powered down if any of the following is TRUE
+	 * (a) WoL is enabled
+	 * (b) AMT is active
+	 * (c) SoL/IDER session is active */
+	if (!adapter->wol && adapter->hw.mac_type >= e1000_82540 &&
+	    adapter->hw.mac_type != e1000_ich8lan &&
+	    adapter->hw.media_type == e1000_media_type_copper &&
+	    !(E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN) &&
+	    !mng_mode_enabled &&
+	    !e1000_check_phy_reset_block(&adapter->hw)) {
+		uint16_t mii_reg = 0;
+		e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
+		mii_reg |= MII_CR_POWER_DOWN;
+		e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
+		mdelay(1);
+	}
+}
+
 void
 e1000_down(struct e1000_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
-	boolean_t mng_mode_enabled = (adapter->hw.mac_type >= e1000_82571) &&
-				     e1000_check_mng_mode(&adapter->hw);
 
 	e1000_irq_disable(adapter);
 
-	free_irq(adapter->pdev->irq, netdev);
-#ifdef CONFIG_PCI_MSI
-	if (adapter->hw.mac_type > e1000_82547_rev_2 &&
-	   adapter->have_msi == TRUE)
-		pci_disable_msi(adapter->pdev);
-#endif
 	del_timer_sync(&adapter->tx_fifo_stall_timer);
 	del_timer_sync(&adapter->watchdog_timer);
 	del_timer_sync(&adapter->phy_info_timer);
@@ -476,23 +545,17 @@
 	e1000_reset(adapter);
 	e1000_clean_all_tx_rings(adapter);
 	e1000_clean_all_rx_rings(adapter);
+}
 
-	/* Power down the PHY so no link is implied when interface is down *
-	 * The PHY cannot be powered down if any of the following is TRUE *
-	 * (a) WoL is enabled
-	 * (b) AMT is active
-	 * (c) SoL/IDER session is active */
-	if (!adapter->wol && adapter->hw.mac_type >= e1000_82540 &&
-	   adapter->hw.media_type == e1000_media_type_copper &&
-	   !(E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN) &&
-	   !mng_mode_enabled &&
-	   !e1000_check_phy_reset_block(&adapter->hw)) {
-		uint16_t mii_reg;
-		e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
-		mii_reg |= MII_CR_POWER_DOWN;
-		e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
-		mdelay(1);
-	}
+void
+e1000_reinit_locked(struct e1000_adapter *adapter)
+{
+	WARN_ON(in_interrupt());
+	while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+		msleep(1);
+	e1000_down(adapter);
+	e1000_up(adapter);
+	clear_bit(__E1000_RESETTING, &adapter->flags);
 }
 
 void
@@ -518,6 +581,9 @@
 	case e1000_82573:
 		pba = E1000_PBA_12K;
 		break;
+	case e1000_ich8lan:
+		pba = E1000_PBA_8K;
+		break;
 	default:
 		pba = E1000_PBA_48K;
 		break;
@@ -542,6 +608,12 @@
 	/* Set the FC high water mark to 90% of the FIFO size.
 	 * Required to clear last 3 LSB */
 	fc_high_water_mark = ((pba * 9216)/10) & 0xFFF8;
+	/* We can't use 90% on small FIFOs because the remainder
+	 * would be less than 1 full frame.  In this case, we size
+	 * it to allow at least a full frame above the high water
+	 *  mark. */
+	if (pba < E1000_PBA_16K)
+		fc_high_water_mark = (pba * 1024) - 1600;
 
 	adapter->hw.fc_high_water = fc_high_water_mark;
 	adapter->hw.fc_low_water = fc_high_water_mark - 8;
@@ -564,6 +636,23 @@
 
 	e1000_reset_adaptive(&adapter->hw);
 	e1000_phy_get_info(&adapter->hw, &adapter->phy_info);
+
+	if (!adapter->smart_power_down &&
+	    (adapter->hw.mac_type == e1000_82571 ||
+	     adapter->hw.mac_type == e1000_82572)) {
+		uint16_t phy_data = 0;
+		/* speed up time to link by disabling smart power down, ignore
+		 * the return value of this function because there is nothing
+		 * different we would do if it failed */
+		e1000_read_phy_reg(&adapter->hw, IGP02E1000_PHY_POWER_MGMT,
+		                   &phy_data);
+		phy_data &= ~IGP02E1000_PM_SPD;
+		e1000_write_phy_reg(&adapter->hw, IGP02E1000_PHY_POWER_MGMT,
+		                    phy_data);
+	}
+
+	if (adapter->hw.mac_type < e1000_ich8lan)
+	/* FIXME: this code is duplicate and wrong for PCI Express */
 	if (adapter->en_mng_pt) {
 		manc = E1000_READ_REG(&adapter->hw, MANC);
 		manc |= (E1000_MANC_ARP_EN | E1000_MANC_EN_MNG2HOST);
@@ -590,6 +679,7 @@
 	struct net_device *netdev;
 	struct e1000_adapter *adapter;
 	unsigned long mmio_start, mmio_len;
+	unsigned long flash_start, flash_len;
 
 	static int cards_found = 0;
 	static int e1000_ksp3_port_a = 0; /* global ksp3 port a indication */
@@ -599,10 +689,12 @@
 	if ((err = pci_enable_device(pdev)))
 		return err;
 
-	if (!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) {
+	if (!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK)) &&
+	    !(err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))) {
 		pci_using_dac = 1;
 	} else {
-		if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) {
+		if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) &&
+		    (err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK))) {
 			E1000_ERR("No usable DMA configuration, aborting\n");
 			return err;
 		}
@@ -682,6 +774,19 @@
 	if ((err = e1000_sw_init(adapter)))
 		goto err_sw_init;
 
+	/* Flash BAR mapping must happen after e1000_sw_init
+	 * because it depends on mac_type */
+	if ((adapter->hw.mac_type == e1000_ich8lan) &&
+	   (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
+		flash_start = pci_resource_start(pdev, 1);
+		flash_len = pci_resource_len(pdev, 1);
+		adapter->hw.flash_address = ioremap(flash_start, flash_len);
+		if (!adapter->hw.flash_address) {
+			err = -EIO;
+			goto err_flashmap;
+		}
+	}
+
 	if ((err = e1000_check_phy_reset_block(&adapter->hw)))
 		DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
 
@@ -700,6 +805,8 @@
 				   NETIF_F_HW_VLAN_TX |
 				   NETIF_F_HW_VLAN_RX |
 				   NETIF_F_HW_VLAN_FILTER;
+		if (adapter->hw.mac_type == e1000_ich8lan)
+			netdev->features &= ~NETIF_F_HW_VLAN_FILTER;
 	}
 
 #ifdef NETIF_F_TSO
@@ -715,11 +822,17 @@
 	if (pci_using_dac)
 		netdev->features |= NETIF_F_HIGHDMA;
 
-	/* hard_start_xmit is safe against parallel locking */
 	netdev->features |= NETIF_F_LLTX;
 
 	adapter->en_mng_pt = e1000_enable_mng_pass_thru(&adapter->hw);
 
+	/* initialize eeprom parameters */
+
+	if (e1000_init_eeprom_params(&adapter->hw)) {
+		E1000_ERR("EEPROM initialization failed\n");
+		return -EIO;
+	}
+
 	/* before reading the EEPROM, reset the controller to
 	 * put the device in a known good starting state */
 
@@ -758,9 +871,6 @@
 	adapter->watchdog_timer.function = &e1000_watchdog;
 	adapter->watchdog_timer.data = (unsigned long) adapter;
 
-	INIT_WORK(&adapter->watchdog_task,
-		(void (*)(void *))e1000_watchdog_task, adapter);
-
 	init_timer(&adapter->phy_info_timer);
 	adapter->phy_info_timer.function = &e1000_update_phy_info;
 	adapter->phy_info_timer.data = (unsigned long) adapter;
@@ -790,6 +900,11 @@
 			EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
 		eeprom_apme_mask = E1000_EEPROM_82544_APM;
 		break;
+	case e1000_ich8lan:
+		e1000_read_eeprom(&adapter->hw,
+			EEPROM_INIT_CONTROL1_REG, 1, &eeprom_data);
+		eeprom_apme_mask = E1000_EEPROM_ICH8_APME;
+		break;
 	case e1000_82546:
 	case e1000_82546_rev_3:
 	case e1000_82571:
@@ -849,6 +964,9 @@
 	return 0;
 
 err_register:
+	if (adapter->hw.flash_address)
+		iounmap(adapter->hw.flash_address);
+err_flashmap:
 err_sw_init:
 err_eeprom:
 	iounmap(adapter->hw.hw_addr);
@@ -882,6 +1000,7 @@
 	flush_scheduled_work();
 
 	if (adapter->hw.mac_type >= e1000_82540 &&
+	   adapter->hw.mac_type != e1000_ich8lan &&
 	   adapter->hw.media_type == e1000_media_type_copper) {
 		manc = E1000_READ_REG(&adapter->hw, MANC);
 		if (manc & E1000_MANC_SMBUS_EN) {
@@ -910,6 +1029,8 @@
 #endif
 
 	iounmap(adapter->hw.hw_addr);
+	if (adapter->hw.flash_address)
+		iounmap(adapter->hw.flash_address);
 	pci_release_regions(pdev);
 
 	free_netdev(netdev);
@@ -960,13 +1081,6 @@
 		return -EIO;
 	}
 
-	/* initialize eeprom parameters */
-
-	if (e1000_init_eeprom_params(hw)) {
-		E1000_ERR("EEPROM initialization failed\n");
-		return -EIO;
-	}
-
 	switch (hw->mac_type) {
 	default:
 		break;
@@ -1078,6 +1192,10 @@
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	int err;
 
+	/* disallow open during test */
+	if (test_bit(__E1000_DRIVER_TESTING, &adapter->flags))
+		return -EBUSY;
+
 	/* allocate transmit descriptors */
 
 	if ((err = e1000_setup_all_tx_resources(adapter)))
@@ -1088,6 +1206,12 @@
 	if ((err = e1000_setup_all_rx_resources(adapter)))
 		goto err_setup_rx;
 
+	err = e1000_request_irq(adapter);
+	if (err)
+		goto err_up;
+
+	e1000_power_up_phy(adapter);
+
 	if ((err = e1000_up(adapter)))
 		goto err_up;
 	adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
@@ -1131,7 +1255,10 @@
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 
+	WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
 	e1000_down(adapter);
+	e1000_power_down_phy(adapter);
+	e1000_free_irq(adapter);
 
 	e1000_free_all_tx_resources(adapter);
 	e1000_free_all_rx_resources(adapter);
@@ -1189,8 +1316,7 @@
 	int size;
 
 	size = sizeof(struct e1000_buffer) * txdr->count;
-
-	txdr->buffer_info = vmalloc_node(size, pcibus_to_node(pdev->bus));
+	txdr->buffer_info = vmalloc(size);
 	if (!txdr->buffer_info) {
 		DPRINTK(PROBE, ERR,
 		"Unable to allocate memory for the transmit descriptor ring\n");
@@ -1302,11 +1428,11 @@
 		tdba = adapter->tx_ring[0].dma;
 		tdlen = adapter->tx_ring[0].count *
 			sizeof(struct e1000_tx_desc);
-		E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
-		E1000_WRITE_REG(hw, TDBAH, (tdba >> 32));
 		E1000_WRITE_REG(hw, TDLEN, tdlen);
-		E1000_WRITE_REG(hw, TDH, 0);
+		E1000_WRITE_REG(hw, TDBAH, (tdba >> 32));
+		E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
 		E1000_WRITE_REG(hw, TDT, 0);
+		E1000_WRITE_REG(hw, TDH, 0);
 		adapter->tx_ring[0].tdh = E1000_TDH;
 		adapter->tx_ring[0].tdt = E1000_TDT;
 		break;
@@ -1418,7 +1544,7 @@
 	int size, desc_len;
 
 	size = sizeof(struct e1000_buffer) * rxdr->count;
-	rxdr->buffer_info = vmalloc_node(size, pcibus_to_node(pdev->bus));
+	rxdr->buffer_info = vmalloc(size);
 	if (!rxdr->buffer_info) {
 		DPRINTK(PROBE, ERR,
 		"Unable to allocate memory for the receive descriptor ring\n");
@@ -1560,9 +1686,6 @@
 		E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
 		(adapter->hw.mc_filter_type << E1000_RCTL_MO_SHIFT);
 
-	if (adapter->hw.mac_type > e1000_82543)
-		rctl |= E1000_RCTL_SECRC;
-
 	if (adapter->hw.tbi_compatibility_on == 1)
 		rctl |= E1000_RCTL_SBP;
 	else
@@ -1628,7 +1751,7 @@
 		rfctl |= E1000_RFCTL_IPV6_DIS;
 		E1000_WRITE_REG(&adapter->hw, RFCTL, rfctl);
 
-		rctl |= E1000_RCTL_DTYP_PS | E1000_RCTL_SECRC;
+		rctl |= E1000_RCTL_DTYP_PS;
 
 		psrctl |= adapter->rx_ps_bsize0 >>
 			E1000_PSRCTL_BSIZE0_SHIFT;
@@ -1712,11 +1835,11 @@
 	case 1:
 	default:
 		rdba = adapter->rx_ring[0].dma;
-		E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
-		E1000_WRITE_REG(hw, RDBAH, (rdba >> 32));
 		E1000_WRITE_REG(hw, RDLEN, rdlen);
-		E1000_WRITE_REG(hw, RDH, 0);
+		E1000_WRITE_REG(hw, RDBAH, (rdba >> 32));
+		E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
 		E1000_WRITE_REG(hw, RDT, 0);
+		E1000_WRITE_REG(hw, RDH, 0);
 		adapter->rx_ring[0].rdh = E1000_RDH;
 		adapter->rx_ring[0].rdt = E1000_RDT;
 		break;
@@ -1741,9 +1864,6 @@
 		E1000_WRITE_REG(hw, RXCSUM, rxcsum);
 	}
 
-	if (hw->mac_type == e1000_82573)
-		E1000_WRITE_REG(hw, ERT, 0x0100);
-
 	/* Enable Receives */
 	E1000_WRITE_REG(hw, RCTL, rctl);
 }
@@ -2083,6 +2203,12 @@
 	uint32_t rctl;
 	uint32_t hash_value;
 	int i, rar_entries = E1000_RAR_ENTRIES;
+	int mta_reg_count = (hw->mac_type == e1000_ich8lan) ?
+				E1000_NUM_MTA_REGISTERS_ICH8LAN :
+				E1000_NUM_MTA_REGISTERS;
+
+	if (adapter->hw.mac_type == e1000_ich8lan)
+		rar_entries = E1000_RAR_ENTRIES_ICH8LAN;
 
 	/* reserve RAR[14] for LAA over-write work-around */
 	if (adapter->hw.mac_type == e1000_82571)
@@ -2121,14 +2247,18 @@
 			mc_ptr = mc_ptr->next;
 		} else {
 			E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0);
+			E1000_WRITE_FLUSH(hw);
 			E1000_WRITE_REG_ARRAY(hw, RA, (i << 1) + 1, 0);
+			E1000_WRITE_FLUSH(hw);
 		}
 	}
 
 	/* clear the old settings from the multicast hash table */
 
-	for (i = 0; i < E1000_NUM_MTA_REGISTERS; i++)
+	for (i = 0; i < mta_reg_count; i++) {
 		E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
+		E1000_WRITE_FLUSH(hw);
+	}
 
 	/* load any remaining addresses into the hash table */
 
@@ -2201,19 +2331,19 @@
 e1000_watchdog(unsigned long data)
 {
 	struct e1000_adapter *adapter = (struct e1000_adapter *) data;
-
-	/* Do the rest outside of interrupt context */
-	schedule_work(&adapter->watchdog_task);
-}
-
-static void
-e1000_watchdog_task(struct e1000_adapter *adapter)
-{
 	struct net_device *netdev = adapter->netdev;
 	struct e1000_tx_ring *txdr = adapter->tx_ring;
 	uint32_t link, tctl;
+	int32_t ret_val;
 
-	e1000_check_for_link(&adapter->hw);
+	ret_val = e1000_check_for_link(&adapter->hw);
+	if ((ret_val == E1000_ERR_PHY) &&
+	    (adapter->hw.phy_type == e1000_phy_igp_3) &&
+	    (E1000_READ_REG(&adapter->hw, CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
+		/* See e1000_kumeran_lock_loss_workaround() */
+		DPRINTK(LINK, INFO,
+			"Gigabit has been disabled, downgrading speed\n");
+	}
 	if (adapter->hw.mac_type == e1000_82573) {
 		e1000_enable_tx_pkt_filtering(&adapter->hw);
 		if (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id)
@@ -2394,7 +2524,7 @@
 	uint8_t ipcss, ipcso, tucss, tucso, hdr_len;
 	int err;
 
-	if (skb_shinfo(skb)->gso_size) {
+	if (skb_is_gso(skb)) {
 		if (skb_header_cloned(skb)) {
 			err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
 			if (err)
@@ -2519,7 +2649,7 @@
 		 * tso gets written back prematurely before the data is fully
 		 * DMA'd to the controller */
 		if (!skb->data_len && tx_ring->last_tx_tso &&
-		    !skb_shinfo(skb)->gso_size) {
+		    !skb_is_gso(skb)) {
 			tx_ring->last_tx_tso = 0;
 			size -= 4;
 		}
@@ -2779,9 +2909,10 @@
 			case e1000_82571:
 			case e1000_82572:
 			case e1000_82573:
+			case e1000_ich8lan:
 				pull_size = min((unsigned int)4, skb->data_len);
 				if (!__pskb_pull_tail(skb, pull_size)) {
-					printk(KERN_ERR
+					DPRINTK(DRV, ERR,
 						"__pskb_pull_tail failed.\n");
 					dev_kfree_skb_any(skb);
 					return NETDEV_TX_OK;
@@ -2806,8 +2937,7 @@
 
 #ifdef NETIF_F_TSO
 	/* Controller Erratum workaround */
-	if (!skb->data_len && tx_ring->last_tx_tso &&
-	    !skb_shinfo(skb)->gso_size)
+	if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb))
 		count++;
 #endif
 
@@ -2919,8 +3049,7 @@
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 
-	e1000_down(adapter);
-	e1000_up(adapter);
+	e1000_reinit_locked(adapter);
 }
 
 /**
@@ -2964,6 +3093,7 @@
 	/* Adapter-specific max frame size limits. */
 	switch (adapter->hw.mac_type) {
 	case e1000_undefined ... e1000_82542_rev2_1:
+	case e1000_ich8lan:
 		if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
 			DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n");
 			return -EINVAL;
@@ -3026,10 +3156,8 @@
 
 	netdev->mtu = new_mtu;
 
-	if (netif_running(netdev)) {
-		e1000_down(adapter);
-		e1000_up(adapter);
-	}
+	if (netif_running(netdev))
+		e1000_reinit_locked(adapter);
 
 	adapter->hw.max_frame_size = max_frame;
 
@@ -3074,12 +3202,15 @@
 	adapter->stats.bprc += E1000_READ_REG(hw, BPRC);
 	adapter->stats.mprc += E1000_READ_REG(hw, MPRC);
 	adapter->stats.roc += E1000_READ_REG(hw, ROC);
+
+	if (adapter->hw.mac_type != e1000_ich8lan) {
 	adapter->stats.prc64 += E1000_READ_REG(hw, PRC64);
 	adapter->stats.prc127 += E1000_READ_REG(hw, PRC127);
 	adapter->stats.prc255 += E1000_READ_REG(hw, PRC255);
 	adapter->stats.prc511 += E1000_READ_REG(hw, PRC511);
 	adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023);
 	adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522);
+	}
 
 	adapter->stats.symerrs += E1000_READ_REG(hw, SYMERRS);
 	adapter->stats.mpc += E1000_READ_REG(hw, MPC);
@@ -3107,12 +3238,16 @@
 	adapter->stats.totl += E1000_READ_REG(hw, TOTL);
 	adapter->stats.toth += E1000_READ_REG(hw, TOTH);
 	adapter->stats.tpr += E1000_READ_REG(hw, TPR);
+
+	if (adapter->hw.mac_type != e1000_ich8lan) {
 	adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64);
 	adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127);
 	adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255);
 	adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511);
 	adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023);
 	adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522);
+	}
+
 	adapter->stats.mptc += E1000_READ_REG(hw, MPTC);
 	adapter->stats.bptc += E1000_READ_REG(hw, BPTC);
 
@@ -3134,6 +3269,8 @@
 	if (hw->mac_type > e1000_82547_rev_2) {
 		adapter->stats.iac += E1000_READ_REG(hw, IAC);
 		adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC);
+
+		if (adapter->hw.mac_type != e1000_ich8lan) {
 		adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC);
 		adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC);
 		adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC);
@@ -3141,6 +3278,7 @@
 		adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC);
 		adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC);
 		adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC);
+		}
 	}
 
 	/* Fill out the OS statistics structure */
@@ -3547,7 +3685,8 @@
 			/* All receives must fit into a single buffer */
 			E1000_DBG("%s: Receive packet consumed multiple"
 				  " buffers\n", netdev->name);
-			dev_kfree_skb_irq(skb);
+			/* recycle */
+			buffer_info-> skb = skb;
 			goto next_desc;
 		}
 
@@ -3675,7 +3814,6 @@
 	buffer_info = &rx_ring->buffer_info[i];
 
 	while (staterr & E1000_RXD_STAT_DD) {
-		buffer_info = &rx_ring->buffer_info[i];
 		ps_page = &rx_ring->ps_page[i];
 		ps_page_dma = &rx_ring->ps_page_dma[i];
 #ifdef CONFIG_E1000_NAPI
@@ -4180,10 +4318,9 @@
 						return retval;
 					}
 				}
-				if (netif_running(adapter->netdev)) {
-					e1000_down(adapter);
-					e1000_up(adapter);
-				} else
+				if (netif_running(adapter->netdev))
+					e1000_reinit_locked(adapter);
+				else
 					e1000_reset(adapter);
 				break;
 			case M88E1000_PHY_SPEC_CTRL:
@@ -4200,10 +4337,9 @@
 			case PHY_CTRL:
 				if (mii_reg & MII_CR_POWER_DOWN)
 					break;
-				if (netif_running(adapter->netdev)) {
-					e1000_down(adapter);
-					e1000_up(adapter);
-				} else
+				if (netif_running(adapter->netdev))
+					e1000_reinit_locked(adapter);
+				else
 					e1000_reset(adapter);
 				break;
 			}
@@ -4277,18 +4413,21 @@
 		ctrl |= E1000_CTRL_VME;
 		E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
 
+		if (adapter->hw.mac_type != e1000_ich8lan) {
 		/* enable VLAN receive filtering */
 		rctl = E1000_READ_REG(&adapter->hw, RCTL);
 		rctl |= E1000_RCTL_VFE;
 		rctl &= ~E1000_RCTL_CFIEN;
 		E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
 		e1000_update_mng_vlan(adapter);
+		}
 	} else {
 		/* disable VLAN tag insert/strip */
 		ctrl = E1000_READ_REG(&adapter->hw, CTRL);
 		ctrl &= ~E1000_CTRL_VME;
 		E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
 
+		if (adapter->hw.mac_type != e1000_ich8lan) {
 		/* disable VLAN filtering */
 		rctl = E1000_READ_REG(&adapter->hw, RCTL);
 		rctl &= ~E1000_RCTL_VFE;
@@ -4297,6 +4436,7 @@
 			e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
 			adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
 		}
+		}
 	}
 
 	e1000_irq_enable(adapter);
@@ -4458,12 +4598,16 @@
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	uint32_t ctrl, ctrl_ext, rctl, manc, status;
 	uint32_t wufc = adapter->wol;
+#ifdef CONFIG_PM
 	int retval = 0;
+#endif
 
 	netif_device_detach(netdev);
 
-	if (netif_running(netdev))
+	if (netif_running(netdev)) {
+		WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
 		e1000_down(adapter);
+	}
 
 #ifdef CONFIG_PM
 	/* Implement our own version of pci_save_state(pdev) because pci-
@@ -4521,7 +4665,9 @@
 		pci_enable_wake(pdev, PCI_D3cold, 0);
 	}
 
+	/* FIXME: this code is incorrect for PCI Express */
 	if (adapter->hw.mac_type >= e1000_82540 &&
+	   adapter->hw.mac_type != e1000_ich8lan &&
 	   adapter->hw.media_type == e1000_media_type_copper) {
 		manc = E1000_READ_REG(&adapter->hw, MANC);
 		if (manc & E1000_MANC_SMBUS_EN) {
@@ -4532,6 +4678,9 @@
 		}
 	}
 
+	if (adapter->hw.phy_type == e1000_phy_igp_3)
+		e1000_phy_powerdown_workaround(&adapter->hw);
+
 	/* Release control of h/w to f/w.  If f/w is AMT enabled, this
 	 * would have already happened in close and is redundant. */
 	e1000_release_hw_control(adapter);
@@ -4567,7 +4716,9 @@
 
 	netif_device_attach(netdev);
 
+	/* FIXME: this code is incorrect for PCI Express */
 	if (adapter->hw.mac_type >= e1000_82540 &&
+	   adapter->hw.mac_type != e1000_ich8lan &&
 	   adapter->hw.media_type == e1000_media_type_copper) {
 		manc = E1000_READ_REG(&adapter->hw, MANC);
 		manc &= ~(E1000_MANC_ARP_EN);
diff -urN linux-2.6.18-rc1/drivers/net/e1000/e1000_osdep.h linux-2.6.18-rc2/drivers/net/e1000/e1000_osdep.h
--- linux-2.6.18-rc1/drivers/net/e1000/e1000_osdep.h	2006-07-15 22:34:42.560995710 +0000
+++ linux-2.6.18-rc2/drivers/net/e1000/e1000_osdep.h	2006-07-15 22:34:47.829567604 +0000
@@ -127,4 +127,17 @@
 
 #define E1000_WRITE_FLUSH(a) E1000_READ_REG(a, STATUS)
 
+#define E1000_WRITE_ICH8_REG(a, reg, value) ( \
+    writel((value), ((a)->flash_address + reg)))
+
+#define E1000_READ_ICH8_REG(a, reg) ( \
+    readl((a)->flash_address + reg))
+
+#define E1000_WRITE_ICH8_REG16(a, reg, value) ( \
+    writew((value), ((a)->flash_address + reg)))
+
+#define E1000_READ_ICH8_REG16(a, reg) ( \
+    readw((a)->flash_address + reg))
+
+
 #endif /* _E1000_OSDEP_H_ */
diff -urN linux-2.6.18-rc1/drivers/net/e1000/e1000_param.c linux-2.6.18-rc2/drivers/net/e1000/e1000_param.c
--- linux-2.6.18-rc1/drivers/net/e1000/e1000_param.c	2006-07-15 22:34:42.560995710 +0000
+++ linux-2.6.18-rc2/drivers/net/e1000/e1000_param.c	2006-07-15 22:34:47.833568038 +0000
@@ -45,6 +45,16 @@
  */
 
 #define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
+/* Module Parameters are always initialized to -1, so that the driver
+ * can tell the difference between no user specified value or the
+ * user asking for the default value.
+ * The true default values are loaded in when e1000_check_options is called.
+ *
+ * This is a GCC extension to ANSI C.
+ * See the item "Labeled Elements in Initializers" in the section
+ * "Extensions to the C Language Family" of the GCC documentation.
+ */
+
 #define E1000_PARAM(X, desc) \
 	static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \
 	static int num_##X = 0; \
@@ -183,6 +193,24 @@
 
 E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
 
+/* Enable Smart Power Down of the PHY
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 0 (disabled)
+ */
+
+E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
+
+/* Enable Kumeran Lock Loss workaround
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 1 (enabled)
+ */
+
+E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
+
 #define AUTONEG_ADV_DEFAULT  0x2F
 #define AUTONEG_ADV_MASK     0x2F
 #define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL
@@ -296,6 +324,7 @@
 		DPRINTK(PROBE, NOTICE,
 		       "Warning: no configuration for board #%i\n", bd);
 		DPRINTK(PROBE, NOTICE, "Using defaults for all values\n");
+		bd = E1000_MAX_NIC;
 	}
 
 	{ /* Transmit Descriptor Count */
@@ -313,14 +342,9 @@
 		opt.arg.r.max = mac_type < e1000_82544 ?
 			E1000_MAX_TXD : E1000_MAX_82544_TXD;
 
-		if (num_TxDescriptors > bd) {
-			tx_ring->count = TxDescriptors[bd];
-			e1000_validate_option(&tx_ring->count, &opt, adapter);
-			E1000_ROUNDUP(tx_ring->count,
-						REQ_TX_DESCRIPTOR_MULTIPLE);
-		} else {
-			tx_ring->count = opt.def;
-		}
+		tx_ring->count = TxDescriptors[bd];
+		e1000_validate_option(&tx_ring->count, &opt, adapter);
+		E1000_ROUNDUP(tx_ring->count, REQ_TX_DESCRIPTOR_MULTIPLE);
 		for (i = 0; i < adapter->num_tx_queues; i++)
 			tx_ring[i].count = tx_ring->count;
 	}
@@ -339,14 +363,9 @@
 		opt.arg.r.max = mac_type < e1000_82544 ? E1000_MAX_RXD :
 			E1000_MAX_82544_RXD;
 
-		if (num_RxDescriptors > bd) {
-			rx_ring->count = RxDescriptors[bd];
-			e1000_validate_option(&rx_ring->count, &opt, adapter);
-			E1000_ROUNDUP(rx_ring->count,
-						REQ_RX_DESCRIPTOR_MULTIPLE);
-		} else {
-			rx_ring->count = opt.def;
-		}
+		rx_ring->count = RxDescriptors[bd];
+		e1000_validate_option(&rx_ring->count, &opt, adapter);
+		E1000_ROUNDUP(rx_ring->count, REQ_RX_DESCRIPTOR_MULTIPLE);
 		for (i = 0; i < adapter->num_rx_queues; i++)
 			rx_ring[i].count = rx_ring->count;
 	}
@@ -358,13 +377,9 @@
 			.def  = OPTION_ENABLED
 		};
 
-		if (num_XsumRX > bd) {
-			int rx_csum = XsumRX[bd];
-			e1000_validate_option(&rx_csum, &opt, adapter);
-			adapter->rx_csum = rx_csum;
-		} else {
-			adapter->rx_csum = opt.def;
-		}
+		int rx_csum = XsumRX[bd];
+		e1000_validate_option(&rx_csum, &opt, adapter);
+		adapter->rx_csum = rx_csum;
 	}
 	{ /* Flow Control */
 
@@ -384,13 +399,9 @@
 					 .p = fc_list }}
 		};
 
-		if (num_FlowControl > bd) {
-			int fc = FlowControl[bd];
-			e1000_validate_option(&fc, &opt, adapter);
-			adapter->hw.fc = adapter->hw.original_fc = fc;
-		} else {
-			adapter->hw.fc = adapter->hw.original_fc = opt.def;
-		}
+		int fc = FlowControl[bd];
+		e1000_validate_option(&fc, &opt, adapter);
+		adapter->hw.fc = adapter->hw.original_fc = fc;
 	}
 	{ /* Transmit Interrupt Delay */
 		struct e1000_option opt = {
@@ -402,13 +413,8 @@
 					 .max = MAX_TXDELAY }}
 		};
 
-		if (num_TxIntDelay > bd) {
-			adapter->tx_int_delay = TxIntDelay[bd];
-			e1000_validate_option(&adapter->tx_int_delay, &opt,
-								adapter);
-		} else {
-			adapter->tx_int_delay = opt.def;
-		}
+		adapter->tx_int_delay = TxIntDelay[bd];
+		e1000_validate_option(&adapter->tx_int_delay, &opt, adapter);
 	}
 	{ /* Transmit Absolute Interrupt Delay */
 		struct e1000_option opt = {
@@ -420,13 +426,9 @@
 					 .max = MAX_TXABSDELAY }}
 		};
 
-		if (num_TxAbsIntDelay > bd) {
-			adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
-			e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
-								adapter);
-		} else {
-			adapter->tx_abs_int_delay = opt.def;
-		}
+		adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
+		e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
+		                      adapter);
 	}
 	{ /* Receive Interrupt Delay */
 		struct e1000_option opt = {
@@ -438,13 +440,8 @@
 					 .max = MAX_RXDELAY }}
 		};
 
-		if (num_RxIntDelay > bd) {
-			adapter->rx_int_delay = RxIntDelay[bd];
-			e1000_validate_option(&adapter->rx_int_delay, &opt,
-								adapter);
-		} else {
-			adapter->rx_int_delay = opt.def;
-		}
+		adapter->rx_int_delay = RxIntDelay[bd];
+		e1000_validate_option(&adapter->rx_int_delay, &opt, adapter);
 	}
 	{ /* Receive Absolute Interrupt Delay */
 		struct e1000_option opt = {
@@ -456,13 +453,9 @@
 					 .max = MAX_RXABSDELAY }}
 		};
 
-		if (num_RxAbsIntDelay > bd) {
-			adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
-			e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
-								adapter);
-		} else {
-			adapter->rx_abs_int_delay = opt.def;
-		}
+		adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
+		e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
+		                      adapter);
 	}
 	{ /* Interrupt Throttling Rate */
 		struct e1000_option opt = {
@@ -474,26 +467,44 @@
 					 .max = MAX_ITR }}
 		};
 
-		if (num_InterruptThrottleRate > bd) {
-			adapter->itr = InterruptThrottleRate[bd];
-			switch (adapter->itr) {
-			case 0:
-				DPRINTK(PROBE, INFO, "%s turned off\n",
-					opt.name);
-				break;
-			case 1:
-				DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
-					opt.name);
-				break;
-			default:
-				e1000_validate_option(&adapter->itr, &opt,
-					adapter);
-				break;
-			}
-		} else {
-			adapter->itr = opt.def;
+		adapter->itr = InterruptThrottleRate[bd];
+		switch (adapter->itr) {
+		case 0:
+			DPRINTK(PROBE, INFO, "%s turned off\n", opt.name);
+			break;
+		case 1:
+			DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
+				opt.name);
+			break;
+		default:
+			e1000_validate_option(&adapter->itr, &opt, adapter);
+			break;
 		}
 	}
+	{ /* Smart Power Down */
+		struct e1000_option opt = {
+			.type = enable_option,
+			.name = "PHY Smart Power Down",
+			.err  = "defaulting to Disabled",
+			.def  = OPTION_DISABLED
+		};
+
+		int spd = SmartPowerDownEnable[bd];
+		e1000_validate_option(&spd, &opt, adapter);
+		adapter->smart_power_down = spd;
+	}
+	{ /* Kumeran Lock Loss Workaround */
+		struct e1000_option opt = {
+			.type = enable_option,
+			.name = "Kumeran Lock Loss Workaround",
+			.err  = "defaulting to Enabled",
+			.def  = OPTION_ENABLED
+		};
+
+			int kmrn_lock_loss = KumeranLockLoss[bd];
+			e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
+			adapter->hw.kmrn_lock_loss_workaround_disabled = !kmrn_lock_loss;
+	}
 
 	switch (adapter->hw.media_type) {
 	case e1000_media_type_fiber:
@@ -519,17 +530,18 @@
 e1000_check_fiber_options(struct e1000_adapter *adapter)
 {
 	int bd = adapter->bd_number;
-	if (num_Speed > bd) {
+	bd = bd > E1000_MAX_NIC ? E1000_MAX_NIC : bd;
+	if ((Speed[bd] != OPTION_UNSET)) {
 		DPRINTK(PROBE, INFO, "Speed not valid for fiber adapters, "
 		       "parameter ignored\n");
 	}
 
-	if (num_Duplex > bd) {
+	if ((Duplex[bd] != OPTION_UNSET)) {
 		DPRINTK(PROBE, INFO, "Duplex not valid for fiber adapters, "
 		       "parameter ignored\n");
 	}
 
-	if ((num_AutoNeg > bd) && (AutoNeg[bd] != 0x20)) {
+	if ((AutoNeg[bd] != OPTION_UNSET) && (AutoNeg[bd] != 0x20)) {
 		DPRINTK(PROBE, INFO, "AutoNeg other than 1000/Full is "
 				 "not valid for fiber adapters, "
 				 "parameter ignored\n");
@@ -548,6 +560,7 @@
 {
 	int speed, dplx, an;
 	int bd = adapter->bd_number;
+	bd = bd > E1000_MAX_NIC ? E1000_MAX_NIC : bd;
 
 	{ /* Speed */
 		struct e1000_opt_list speed_list[] = {{          0, "" },
@@ -564,12 +577,8 @@
 					 .p = speed_list }}
 		};
 
-		if (num_Speed > bd) {
-			speed = Speed[bd];
-			e1000_validate_option(&speed, &opt, adapter);
-		} else {
-			speed = opt.def;
-		}
+		speed = Speed[bd];
+		e1000_validate_option(&speed, &opt, adapter);
 	}
 	{ /* Duplex */
 		struct e1000_opt_list dplx_list[] = {{           0, "" },
@@ -591,15 +600,11 @@
 			        "Speed/Duplex/AutoNeg parameter ignored.\n");
 			return;
 		}
-		if (num_Duplex > bd) {
-			dplx = Duplex[bd];
-			e1000_validate_option(&dplx, &opt, adapter);
-		} else {
-			dplx = opt.def;
-		}
+		dplx = Duplex[bd];
+		e1000_validate_option(&dplx, &opt, adapter);
 	}
 
-	if ((num_AutoNeg > bd) && (speed != 0 || dplx != 0)) {
+	if (AutoNeg[bd] != OPTION_UNSET && (speed != 0 || dplx != 0)) {
 		DPRINTK(PROBE, INFO,
 		       "AutoNeg specified along with Speed or Duplex, "
 		       "parameter ignored\n");
@@ -648,19 +653,15 @@
 					 .p = an_list }}
 		};
 
-		if (num_AutoNeg > bd) {
-			an = AutoNeg[bd];
-			e1000_validate_option(&an, &opt, adapter);
-		} else {
-			an = opt.def;
-		}
+		an = AutoNeg[bd];
+		e1000_validate_option(&an, &opt, adapter);
 		adapter->hw.autoneg_advertised = an;
 	}
 
 	switch (speed + dplx) {
 	case 0:
 		adapter->hw.autoneg = adapter->fc_autoneg = 1;
-		if ((num_Speed > bd) && (speed != 0 || dplx != 0))
+		if (Speed[bd] != OPTION_UNSET || Duplex[bd] != OPTION_UNSET)
 			DPRINTK(PROBE, INFO,
 			       "Speed and duplex autonegotiation enabled\n");
 		break;
diff -urN linux-2.6.18-rc1/drivers/net/forcedeth.c linux-2.6.18-rc2/drivers/net/forcedeth.c
--- linux-2.6.18-rc1/drivers/net/forcedeth.c	2006-07-15 22:34:42.572997012 +0000
+++ linux-2.6.18-rc2/drivers/net/forcedeth.c	2006-07-15 22:34:47.841568906 +0000
@@ -240,10 +240,12 @@
 #define NVREG_RNDSEED_FORCE2	0x2d00
 #define NVREG_RNDSEED_FORCE3	0x7400
 
-	NvRegUnknownSetupReg1 = 0xA0,
-#define NVREG_UNKSETUP1_VAL	0x16070f
-	NvRegUnknownSetupReg2 = 0xA4,
-#define NVREG_UNKSETUP2_VAL	0x16
+	NvRegTxDeferral = 0xA0,
+#define NVREG_TX_DEFERRAL_DEFAULT	0x15050f
+#define NVREG_TX_DEFERRAL_RGMII_10_100	0x16070f
+#define NVREG_TX_DEFERRAL_RGMII_1000	0x14050f
+	NvRegRxDeferral = 0xA4,
+#define NVREG_RX_DEFERRAL_DEFAULT	0x16
 	NvRegMacAddrA = 0xA8,
 	NvRegMacAddrB = 0xAC,
 	NvRegMulticastAddrA = 0xB0,
@@ -269,8 +271,10 @@
 #define NVREG_LINKSPEED_MASK	(0xFFF)
 	NvRegUnknownSetupReg5 = 0x130,
 #define NVREG_UNKSETUP5_BIT31	(1<<31)
-	NvRegUnknownSetupReg3 = 0x13c,
-#define NVREG_UNKSETUP3_VAL1	0x200010
+	NvRegTxWatermark = 0x13c,
+#define NVREG_TX_WM_DESC1_DEFAULT	0x0200010
+#define NVREG_TX_WM_DESC2_3_DEFAULT	0x1e08000
+#define NVREG_TX_WM_DESC2_3_1000	0xfe08000
 	NvRegTxRxControl = 0x144,
 #define NVREG_TXRXCTL_KICK	0x0001
 #define NVREG_TXRXCTL_BIT1	0x0002
@@ -658,7 +662,7 @@
 	{ NvRegMisc1, 0x03c },
 	{ NvRegOffloadConfig, 0x03ff },
 	{ NvRegMulticastAddrA, 0xffffffff },
-	{ NvRegUnknownSetupReg3, 0x0ff },
+	{ NvRegTxWatermark, 0x0ff },
 	{ NvRegWakeUpFlags, 0x07777 },
 	{ 0,0 }
 };
@@ -1495,7 +1499,7 @@
 	np->tx_skbuff[nr] = skb;
 
 #ifdef NETIF_F_TSO
-	if (skb_shinfo(skb)->gso_size)
+	if (skb_is_gso(skb))
 		tx_flags_extra = NV_TX2_TSO | (skb_shinfo(skb)->gso_size << NV_TX2_TSO_SHIFT);
 	else
 #endif
@@ -2127,7 +2131,7 @@
 	int newdup = np->duplex;
 	int mii_status;
 	int retval = 0;
-	u32 control_1000, status_1000, phyreg, pause_flags;
+	u32 control_1000, status_1000, phyreg, pause_flags, txreg;
 
 	/* BMSR_LSTATUS is latched, read it twice:
 	 * we want the current value.
@@ -2245,6 +2249,26 @@
 		phyreg |= PHY_1000;
 	writel(phyreg, base + NvRegPhyInterface);
 
+	if (phyreg & PHY_RGMII) {
+		if ((np->linkspeed & NVREG_LINKSPEED_MASK) == NVREG_LINKSPEED_1000)
+			txreg = NVREG_TX_DEFERRAL_RGMII_1000;
+		else
+			txreg = NVREG_TX_DEFERRAL_RGMII_10_100;
+	} else {
+		txreg = NVREG_TX_DEFERRAL_DEFAULT;
+	}
+	writel(txreg, base + NvRegTxDeferral);
+
+	if (np->desc_ver == DESC_VER_1) {
+		txreg = NVREG_TX_WM_DESC1_DEFAULT;
+	} else {
+		if ((np->linkspeed & NVREG_LINKSPEED_MASK) == NVREG_LINKSPEED_1000)
+			txreg = NVREG_TX_WM_DESC2_3_1000;
+		else
+			txreg = NVREG_TX_WM_DESC2_3_DEFAULT;
+	}
+	writel(txreg, base + NvRegTxWatermark);
+
 	writel(NVREG_MISC1_FORCE | ( np->duplex ? 0 : NVREG_MISC1_HD),
 		base + NvRegMisc1);
 	pci_push(base);
@@ -3910,7 +3934,10 @@
 
 	/* 5) continue setup */
 	writel(np->linkspeed, base + NvRegLinkSpeed);
-	writel(NVREG_UNKSETUP3_VAL1, base + NvRegUnknownSetupReg3);
+	if (np->desc_ver == DESC_VER_1)
+		writel(NVREG_TX_WM_DESC1_DEFAULT, base + NvRegTxWatermark);
+	else
+		writel(NVREG_TX_WM_DESC2_3_DEFAULT, base + NvRegTxWatermark);
 	writel(np->txrxctl_bits, base + NvRegTxRxControl);
 	writel(np->vlanctl_bits, base + NvRegVlanControl);
 	pci_push(base);
@@ -3932,8 +3959,8 @@
 	writel(readl(base + NvRegReceiverStatus), base + NvRegReceiverStatus);
 	get_random_bytes(&i, sizeof(i));
 	writel(NVREG_RNDSEED_FORCE | (i&NVREG_RNDSEED_MASK), base + NvRegRandomSeed);
-	writel(NVREG_UNKSETUP1_VAL, base + NvRegUnknownSetupReg1);
-	writel(NVREG_UNKSETUP2_VAL, base + NvRegUnknownSetupReg2);
+	writel(NVREG_TX_DEFERRAL_DEFAULT, base + NvRegTxDeferral);
+	writel(NVREG_RX_DEFERRAL_DEFAULT, base + NvRegRxDeferral);
 	if (poll_interval == -1) {
 		if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT)
 			writel(NVREG_POLL_DEFAULT_THROUGHPUT, base + NvRegPollingInterval);
diff -urN linux-2.6.18-rc1/drivers/net/hamradio/bpqether.c linux-2.6.18-rc2/drivers/net/hamradio/bpqether.c
--- linux-2.6.18-rc1/drivers/net/hamradio/bpqether.c	2006-07-15 22:34:42.576997447 +0000
+++ linux-2.6.18-rc2/drivers/net/hamradio/bpqether.c	2006-07-15 22:34:47.849569775 +0000
@@ -122,6 +122,12 @@
 
 static LIST_HEAD(bpq_devices);
 
+/*
+ * bpqether network devices are paired with ethernet devices below them, so
+ * form a special "super class" of normal ethernet devices; split their locks
+ * off into a separate class since they always nest.
+ */
+static struct lock_class_key bpq_netdev_xmit_lock_key;
 
 /* ------------------------------------------------------------------------ */
 
@@ -528,6 +534,7 @@
 	err = register_netdevice(ndev);
 	if (err)
 		goto error;
+	lockdep_set_class(&ndev->_xmit_lock, &bpq_netdev_xmit_lock_key);
 
 	/* List protected by RTNL */
 	list_add_rcu(&bpq->bpq_list, &bpq_devices);
diff -urN linux-2.6.18-rc1/drivers/net/irda/ali-ircc.c linux-2.6.18-rc2/drivers/net/irda/ali-ircc.c
--- linux-2.6.18-rc1/drivers/net/irda/ali-ircc.c	2006-07-15 22:34:42.588998749 +0000
+++ linux-2.6.18-rc2/drivers/net/irda/ali-ircc.c	2006-07-15 22:34:47.857570643 +0000
@@ -146,7 +146,7 @@
 {
 	ali_chip_t *chip;
 	chipio_t info;
-	int ret = -ENODEV;
+	int ret;
 	int cfg, cfg_base;
 	int reg, revision;
 	int i = 0;
@@ -160,6 +160,7 @@
                 return ret;
         }
 
+	ret = -ENODEV;
 	
 	/* Probe for all the ALi chipsets we know about */
 	for (chip= chips; chip->name; chip++, i++) 
diff -urN linux-2.6.18-rc1/drivers/net/irda/smsc-ircc2.c linux-2.6.18-rc2/drivers/net/irda/smsc-ircc2.c
--- linux-2.6.18-rc1/drivers/net/irda/smsc-ircc2.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/net/irda/smsc-ircc2.c	2006-07-15 22:34:47.865571512 +0000
@@ -2353,7 +2353,7 @@
 #ifdef CONFIG_PCI
 #define PCIID_VENDOR_INTEL 0x8086
 #define PCIID_VENDOR_ALI 0x10b9
-static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __devinitdata = {
+static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __initdata = {
 	{
 		.vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
 		.device = 0x24cc,
diff -urN linux-2.6.18-rc1/drivers/net/ixgb/ixgb_main.c linux-2.6.18-rc2/drivers/net/ixgb/ixgb_main.c
--- linux-2.6.18-rc1/drivers/net/ixgb/ixgb_main.c	2006-07-15 22:34:42.601000052 +0000
+++ linux-2.6.18-rc2/drivers/net/ixgb/ixgb_main.c	2006-07-15 22:34:47.869571946 +0000
@@ -1173,7 +1173,7 @@
 	uint16_t ipcse, tucse, mss;
 	int err;
 
-	if(likely(skb_shinfo(skb)->gso_size)) {
+	if (likely(skb_is_gso(skb))) {
 		if (skb_header_cloned(skb)) {
 			err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
 			if (err)
@@ -1281,7 +1281,7 @@
 
 	while(len) {
 		buffer_info = &tx_ring->buffer_info[i];
-		size = min(len, IXGB_MAX_JUMBO_FRAME_SIZE);
+		size = min(len, IXGB_MAX_DATA_PER_TXD);
 		buffer_info->length = size;
 		buffer_info->dma =
 			pci_map_single(adapter->pdev,
@@ -1306,7 +1306,7 @@
 
 		while(len) {
 			buffer_info = &tx_ring->buffer_info[i];
-			size = min(len, IXGB_MAX_JUMBO_FRAME_SIZE);
+			size = min(len, IXGB_MAX_DATA_PER_TXD);
 			buffer_info->length = size;
 			buffer_info->dma =
 				pci_map_page(adapter->pdev,
diff -urN linux-2.6.18-rc1/drivers/net/loopback.c linux-2.6.18-rc2/drivers/net/loopback.c
--- linux-2.6.18-rc1/drivers/net/loopback.c	2006-07-15 22:34:42.601000052 +0000
+++ linux-2.6.18-rc2/drivers/net/loopback.c	2006-07-15 22:34:47.873572380 +0000
@@ -139,7 +139,7 @@
 #endif
 
 #ifdef LOOPBACK_TSO
-	if (skb_shinfo(skb)->gso_size) {
+	if (skb_is_gso(skb)) {
 		BUG_ON(skb->protocol != htons(ETH_P_IP));
 		BUG_ON(skb->nh.iph->protocol != IPPROTO_TCP);
 
diff -urN linux-2.6.18-rc1/drivers/net/myri10ge/myri10ge.c linux-2.6.18-rc2/drivers/net/myri10ge/myri10ge.c
--- linux-2.6.18-rc1/drivers/net/myri10ge/myri10ge.c	2006-07-15 22:34:42.605000486 +0000
+++ linux-2.6.18-rc2/drivers/net/myri10ge/myri10ge.c	2006-07-15 22:34:47.877572815 +0000
@@ -2116,7 +2116,7 @@
 		}
 		idx = (idx + 1) & tx->mask;
 	} while (idx != last_idx);
-	if (skb_shinfo(skb)->gso_size) {
+	if (skb_is_gso(skb)) {
 		printk(KERN_ERR
 		       "myri10ge: %s: TSO but wanted to linearize?!?!?\n",
 		       mgp->dev->name);
@@ -2412,14 +2412,20 @@
 		return -EIO;
 	}
 	myri10ge_restore_state(mgp);
-	pci_enable_device(pdev);
+
+	status = pci_enable_device(pdev);
+	if (status < 0) {
+		dev_err(&pdev->dev, "failed to enable device\n");
+		return -EIO;
+	}
+
 	pci_set_master(pdev);
 
 	status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
 			     netdev->name, mgp);
 	if (status != 0) {
 		dev_err(&pdev->dev, "failed to allocate IRQ\n");
-		goto abort_with_msi;
+		goto abort_with_enabled;
 	}
 
 	myri10ge_reset(mgp);
@@ -2438,7 +2444,8 @@
 
 	return 0;
 
-abort_with_msi:
+abort_with_enabled:
+	pci_disable_device(pdev);
 	return -EIO;
 
 }
diff -urN linux-2.6.18-rc1/drivers/net/s2io.c linux-2.6.18-rc2/drivers/net/s2io.c
--- linux-2.6.18-rc1/drivers/net/s2io.c	2006-07-15 22:34:42.629003092 +0000
+++ linux-2.6.18-rc2/drivers/net/s2io.c	2006-07-15 22:34:47.897574986 +0000
@@ -1976,7 +1976,6 @@
 	XENA_dev_config_t __iomem *bar0 = nic->bar0;
 	struct net_device *dev = nic->dev;
 	register u64 val64 = 0;
-	u16 interruptible;
 	u16 subid, i;
 	mac_info_t *mac_control;
 	struct config_param *config;
@@ -2047,16 +2046,6 @@
 		return FAILURE;
 	}
 
-	/*  Enable select interrupts */
-	if (nic->intr_type != INTA)
-		en_dis_able_nic_intrs(nic, ENA_ALL_INTRS, DISABLE_INTRS);
-	else {
-		interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
-		interruptible |= TX_PIC_INTR | RX_PIC_INTR;
-		interruptible |= TX_MAC_INTR | RX_MAC_INTR;
-		en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS);
-	}
-
 	/*
 	 * With some switches, link might be already up at this point.
 	 * Because of this weird behavior, when we enable laser,
@@ -3749,101 +3738,19 @@
 	if (err) {
 		DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
 			  dev->name);
-		if (err == -ENODEV)
-			goto hw_init_failed;
-		else
-			goto hw_enable_failed;
-	}
-
-	/* Store the values of the MSIX table in the nic_t structure */
-	store_xmsi_data(sp);
-
-	/* After proper initialization of H/W, register ISR */
-	if (sp->intr_type == MSI) {
-		err = request_irq((int) sp->pdev->irq, s2io_msi_handle, 
-			IRQF_SHARED, sp->name, dev);
-		if (err) {
-			DBG_PRINT(ERR_DBG, "%s: MSI registration \
-failed\n", dev->name);
-			goto isr_registration_failed;
-		}
-	}
-	if (sp->intr_type == MSI_X) {
-		int i;
-
-		for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) {
-			if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) {
-				sprintf(sp->desc1, "%s:MSI-X-%d-TX",
-					dev->name, i);
-				err = request_irq(sp->entries[i].vector,
-					  s2io_msix_fifo_handle, 0, sp->desc1,
-					  sp->s2io_entries[i].arg);
-				DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc1, 
-				    (unsigned long long)sp->msix_info[i].addr);
-			} else {
-				sprintf(sp->desc2, "%s:MSI-X-%d-RX",
-					dev->name, i);
-				err = request_irq(sp->entries[i].vector,
-					  s2io_msix_ring_handle, 0, sp->desc2,
-					  sp->s2io_entries[i].arg);
-				DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc2, 
-				     (unsigned long long)sp->msix_info[i].addr);
-			}
-			if (err) {
-				DBG_PRINT(ERR_DBG, "%s: MSI-X-%d registration \
-failed\n", dev->name, i);
-				DBG_PRINT(ERR_DBG, "Returned: %d\n", err);
-				goto isr_registration_failed;
-			}
-			sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS;
-		}
-	}
-	if (sp->intr_type == INTA) {
-		err = request_irq((int) sp->pdev->irq, s2io_isr, IRQF_SHARED,
-				sp->name, dev);
-		if (err) {
-			DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
-				  dev->name);
-			goto isr_registration_failed;
-		}
+		goto hw_init_failed;
 	}
 
 	if (s2io_set_mac_addr(dev, dev->dev_addr) == FAILURE) {
 		DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n");
+		s2io_card_down(sp);
 		err = -ENODEV;
-		goto setting_mac_address_failed;
+		goto hw_init_failed;
 	}
 
 	netif_start_queue(dev);
 	return 0;
 
-setting_mac_address_failed:
-	if (sp->intr_type != MSI_X)
-		free_irq(sp->pdev->irq, dev);
-isr_registration_failed:
-	del_timer_sync(&sp->alarm_timer);
-	if (sp->intr_type == MSI_X) {
-		int i;
-		u16 msi_control; /* Temp variable */
-
-		for (i=1; (sp->s2io_entries[i].in_use == 
-				MSIX_REGISTERED_SUCCESS); i++) {
-			int vector = sp->entries[i].vector;
-			void *arg = sp->s2io_entries[i].arg;
-
-			free_irq(vector, arg);
-		}
-		pci_disable_msix(sp->pdev);
-
-		/* Temp */
-		pci_read_config_word(sp->pdev, 0x42, &msi_control);
-		msi_control &= 0xFFFE; /* Disable MSI */
-		pci_write_config_word(sp->pdev, 0x42, msi_control);
-	}
-	else if (sp->intr_type == MSI)
-		pci_disable_msi(sp->pdev);
-hw_enable_failed:
-	s2io_reset(sp);
 hw_init_failed:
 	if (sp->intr_type == MSI_X) {
 		if (sp->entries)
@@ -3874,7 +3781,7 @@
 	flush_scheduled_work();
 	netif_stop_queue(dev);
 	/* Reset card, kill tasklet and free Tx and Rx buffers. */
-	s2io_card_down(sp, 1);
+	s2io_card_down(sp);
 
 	sp->device_close_flag = TRUE;	/* Device is shut down. */
 	return 0;
@@ -5919,7 +5826,7 @@
 
 	dev->mtu = new_mtu;
 	if (netif_running(dev)) {
-		s2io_card_down(sp, 0);
+		s2io_card_down(sp);
 		netif_stop_queue(dev);
 		if (s2io_card_up(sp)) {
 			DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
@@ -6216,43 +6123,106 @@
 
 }
 
-static void s2io_card_down(nic_t * sp, int flag)
+static int s2io_add_isr(nic_t * sp)
 {
-	int cnt = 0;
-	XENA_dev_config_t __iomem *bar0 = sp->bar0;
-	unsigned long flags;
-	register u64 val64 = 0;
+	int ret = 0;
 	struct net_device *dev = sp->dev;
+	int err = 0;
 
-	del_timer_sync(&sp->alarm_timer);
-	/* If s2io_set_link task is executing, wait till it completes. */
-	while (test_and_set_bit(0, &(sp->link_state))) {
-		msleep(50);
+	if (sp->intr_type == MSI)
+		ret = s2io_enable_msi(sp);
+	else if (sp->intr_type == MSI_X)
+		ret = s2io_enable_msi_x(sp);
+	if (ret) {
+		DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);
+		sp->intr_type = INTA;
 	}
-	atomic_set(&sp->card_state, CARD_DOWN);
 
-	/* disable Tx and Rx traffic on the NIC */
-	stop_nic(sp);
-	if (flag) {
-		if (sp->intr_type == MSI_X) {
-			int i;
-			u16 msi_control;
-
-			for (i=1; (sp->s2io_entries[i].in_use ==
-				MSIX_REGISTERED_SUCCESS); i++) {
-				int vector = sp->entries[i].vector;
-				void *arg = sp->s2io_entries[i].arg;
+	/* Store the values of the MSIX table in the nic_t structure */
+	store_xmsi_data(sp);
+
+	/* After proper initialization of H/W, register ISR */
+	if (sp->intr_type == MSI) {
+		err = request_irq((int) sp->pdev->irq, s2io_msi_handle,
+			IRQF_SHARED, sp->name, dev);
+		if (err) {
+			pci_disable_msi(sp->pdev);
+			DBG_PRINT(ERR_DBG, "%s: MSI registration failed\n",
+				  dev->name);
+			return -1;
+		}
+	}
+	if (sp->intr_type == MSI_X) {
+		int i;
 
-				free_irq(vector, arg);
+		for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) {
+			if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) {
+				sprintf(sp->desc[i], "%s:MSI-X-%d-TX",
+					dev->name, i);
+				err = request_irq(sp->entries[i].vector,
+					  s2io_msix_fifo_handle, 0, sp->desc[i],
+						  sp->s2io_entries[i].arg);
+				DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc[i],
+				(unsigned long long)sp->msix_info[i].addr);
+			} else {
+				sprintf(sp->desc[i], "%s:MSI-X-%d-RX",
+					dev->name, i);
+				err = request_irq(sp->entries[i].vector,
+					  s2io_msix_ring_handle, 0, sp->desc[i],
+						  sp->s2io_entries[i].arg);
+				DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc[i],
+				(unsigned long long)sp->msix_info[i].addr);
 			}
-			pci_read_config_word(sp->pdev, 0x42, &msi_control);
-			msi_control &= 0xFFFE; /* Disable MSI */
-			pci_write_config_word(sp->pdev, 0x42, msi_control);
-			pci_disable_msix(sp->pdev);
-		} else {
-			free_irq(sp->pdev->irq, dev);
-			if (sp->intr_type == MSI)
-				pci_disable_msi(sp->pdev);
+			if (err) {
+				DBG_PRINT(ERR_DBG,"%s:MSI-X-%d registration "
+					  "failed\n", dev->name, i);
+				DBG_PRINT(ERR_DBG, "Returned: %d\n", err);
+				return -1;
+			}
+			sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS;
+		}
+	}
+	if (sp->intr_type == INTA) {
+		err = request_irq((int) sp->pdev->irq, s2io_isr, IRQF_SHARED,
+				sp->name, dev);
+		if (err) {
+			DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
+				  dev->name);
+			return -1;
+		}
+	}
+	return 0;
+}
+static void s2io_rem_isr(nic_t * sp)
+{
+	int cnt = 0;
+	struct net_device *dev = sp->dev;
+
+	if (sp->intr_type == MSI_X) {
+		int i;
+		u16 msi_control;
+
+		for (i=1; (sp->s2io_entries[i].in_use ==
+			MSIX_REGISTERED_SUCCESS); i++) {
+			int vector = sp->entries[i].vector;
+			void *arg = sp->s2io_entries[i].arg;
+
+			free_irq(vector, arg);
+		}
+		pci_read_config_word(sp->pdev, 0x42, &msi_control);
+		msi_control &= 0xFFFE; /* Disable MSI */
+		pci_write_config_word(sp->pdev, 0x42, msi_control);
+
+		pci_disable_msix(sp->pdev);
+	} else {
+		free_irq(sp->pdev->irq, dev);
+		if (sp->intr_type == MSI) {
+			u16 val;
+
+			pci_disable_msi(sp->pdev);
+			pci_read_config_word(sp->pdev, 0x4c, &val);
+			val ^= 0x1;
+			pci_write_config_word(sp->pdev, 0x4c, val);
 		}
 	}
 	/* Waiting till all Interrupt handlers are complete */
@@ -6263,6 +6233,26 @@
 			break;
 		cnt++;
 	} while(cnt < 5);
+}
+
+static void s2io_card_down(nic_t * sp)
+{
+	int cnt = 0;
+	XENA_dev_config_t __iomem *bar0 = sp->bar0;
+	unsigned long flags;
+	register u64 val64 = 0;
+
+	del_timer_sync(&sp->alarm_timer);
+	/* If s2io_set_link task is executing, wait till it completes. */
+	while (test_and_set_bit(0, &(sp->link_state))) {
+		msleep(50);
+	}
+	atomic_set(&sp->card_state, CARD_DOWN);
+
+	/* disable Tx and Rx traffic on the NIC */
+	stop_nic(sp);
+
+	s2io_rem_isr(sp);
 
 	/* Kill tasklet. */
 	tasklet_kill(&sp->task);
@@ -6314,23 +6304,16 @@
 	mac_info_t *mac_control;
 	struct config_param *config;
 	struct net_device *dev = (struct net_device *) sp->dev;
+	u16 interruptible;
 
 	/* Initialize the H/W I/O registers */
 	if (init_nic(sp) != 0) {
 		DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
 			  dev->name);
+		s2io_reset(sp);
 		return -ENODEV;
 	}
 
-	if (sp->intr_type == MSI)
-		ret = s2io_enable_msi(sp);
-	else if (sp->intr_type == MSI_X)
-		ret = s2io_enable_msi_x(sp);
-	if (ret) {
-		DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);
-		sp->intr_type = INTA;
-	}
-
 	/*
 	 * Initializing the Rx buffers. For now we are considering only 1
 	 * Rx ring and initializing buffers into 30 Rx blocks
@@ -6361,21 +6344,39 @@
 			sp->lro_max_aggr_per_sess = lro_max_pkts;
 	}
 
-	/* Enable tasklet for the device */
-	tasklet_init(&sp->task, s2io_tasklet, (unsigned long) dev);
-
 	/* Enable Rx Traffic and interrupts on the NIC */
 	if (start_nic(sp)) {
 		DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name);
-		tasklet_kill(&sp->task);
 		s2io_reset(sp);
-		free_irq(dev->irq, dev);
+		free_rx_buffers(sp);
+		return -ENODEV;
+	}
+
+	/* Add interrupt service routine */
+	if (s2io_add_isr(sp) != 0) {
+		if (sp->intr_type == MSI_X)
+			s2io_rem_isr(sp);
+		s2io_reset(sp);
 		free_rx_buffers(sp);
 		return -ENODEV;
 	}
 
 	S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2));
 
+	/* Enable tasklet for the device */
+	tasklet_init(&sp->task, s2io_tasklet, (unsigned long) dev);
+
+	/*  Enable select interrupts */
+	if (sp->intr_type != INTA)
+		en_dis_able_nic_intrs(sp, ENA_ALL_INTRS, DISABLE_INTRS);
+	else {
+		interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
+		interruptible |= TX_PIC_INTR | RX_PIC_INTR;
+		interruptible |= TX_MAC_INTR | RX_MAC_INTR;
+		en_dis_able_nic_intrs(sp, interruptible, ENABLE_INTRS);
+	}
+
+
 	atomic_set(&sp->card_state, CARD_UP);
 	return 0;
 }
@@ -6395,7 +6396,7 @@
 	struct net_device *dev = (struct net_device *) data;
 	nic_t *sp = dev->priv;
 
-	s2io_card_down(sp, 0);
+	s2io_card_down(sp);
 	if (s2io_card_up(sp)) {
 		DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
 			  dev->name);
diff -urN linux-2.6.18-rc1/drivers/net/s2io.h linux-2.6.18-rc2/drivers/net/s2io.h
--- linux-2.6.18-rc1/drivers/net/s2io.h	2006-07-15 22:34:42.629003092 +0000
+++ linux-2.6.18-rc2/drivers/net/s2io.h	2006-07-15 22:34:47.897574986 +0000
@@ -829,8 +829,7 @@
 #define MSIX_FLG                0xA5
 	struct msix_entry *entries;
 	struct s2io_msix_entry *s2io_entries;
-	char desc1[35];
-	char desc2[35];
+	char desc[MAX_REQUESTED_MSI_X][25];
 
 	int avail_msix_vectors; /* No. of MSI-X vectors granted by system */
 
@@ -1002,7 +1001,7 @@
 static struct ethtool_ops netdev_ethtool_ops;
 static void s2io_set_link(unsigned long data);
 static int s2io_set_swapper(nic_t * sp);
-static void s2io_card_down(nic_t *nic, int flag);
+static void s2io_card_down(nic_t *nic);
 static int s2io_card_up(nic_t *nic);
 static int get_xena_rev_id(struct pci_dev *pdev);
 static void restore_xmsi_data(nic_t *nic);
diff -urN linux-2.6.18-rc1/drivers/net/sk98lin/h/xmac_ii.h linux-2.6.18-rc2/drivers/net/sk98lin/h/xmac_ii.h
--- linux-2.6.18-rc1/drivers/net/sk98lin/h/xmac_ii.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/net/sk98lin/h/xmac_ii.h	2006-07-15 22:34:47.901575420 +0000
@@ -1473,7 +1473,7 @@
 #define GM_TXCR_FORCE_JAM	(1<<15)	/* Bit 15:	Force Jam / Flow-Control */
 #define GM_TXCR_CRC_DIS		(1<<14)	/* Bit 14:	Disable insertion of CRC */
 #define GM_TXCR_PAD_DIS		(1<<13)	/* Bit 13:	Disable padding of packets */
-#define GM_TXCR_COL_THR_MSK	(1<<10)	/* Bit 12..10:	Collision Threshold */
+#define GM_TXCR_COL_THR_MSK	(7<<10)	/* Bit 12..10:	Collision Threshold */
 
 #define TX_COL_THR(x)		(SHIFT10(x) & GM_TXCR_COL_THR_MSK)
 
diff -urN linux-2.6.18-rc1/drivers/net/skge.h linux-2.6.18-rc2/drivers/net/skge.h
--- linux-2.6.18-rc1/drivers/net/skge.h	2006-07-15 22:34:42.637003960 +0000
+++ linux-2.6.18-rc2/drivers/net/skge.h	2006-07-15 22:34:47.909576288 +0000
@@ -1734,11 +1734,11 @@
 	GM_TXCR_FORCE_JAM	= 1<<15, /* Bit 15:	Force Jam / Flow-Control */
 	GM_TXCR_CRC_DIS		= 1<<14, /* Bit 14:	Disable insertion of CRC */
 	GM_TXCR_PAD_DIS		= 1<<13, /* Bit 13:	Disable padding of packets */
-	GM_TXCR_COL_THR_MSK	= 1<<10, /* Bit 12..10:	Collision Threshold */
+	GM_TXCR_COL_THR_MSK	= 7<<10, /* Bit 12..10:	Collision Threshold */
 };
 
 #define TX_COL_THR(x)		(((x)<<10) & GM_TXCR_COL_THR_MSK)
-#define TX_COL_DEF		0x04
+#define TX_COL_DEF		0x04	/* late collision after 64 byte */
 
 /*	GM_RX_CTRL			16 bit r/w	Receive Control Register */
 enum {
diff -urN linux-2.6.18-rc1/drivers/net/sky2.c linux-2.6.18-rc2/drivers/net/sky2.c
--- linux-2.6.18-rc1/drivers/net/sky2.c	2006-07-15 22:34:42.641004394 +0000
+++ linux-2.6.18-rc2/drivers/net/sky2.c	2006-07-15 22:34:47.909576288 +0000
@@ -65,6 +65,7 @@
 #define RX_MAX_PENDING		(RX_LE_SIZE/2 - 2)
 #define RX_DEF_PENDING		RX_MAX_PENDING
 #define RX_SKB_ALIGN		8
+#define RX_BUF_WRITE		16
 
 #define TX_RING_SIZE		512
 #define TX_DEF_PENDING		(TX_RING_SIZE - 1)
@@ -234,7 +235,6 @@
 		}
 
 		if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
-			sky2_write16(hw, B0_CTST, Y2_HW_WOL_ON);
 			sky2_pci_write32(hw, PCI_DEV_REG3, 0);
 			reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
 			reg1 &= P_ASPM_CONTROL_MSK;
@@ -243,6 +243,7 @@
 		}
 
 		sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+		udelay(100);
 
 		break;
 
@@ -255,6 +256,7 @@
 		else
 			reg1 |= (PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
 		sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+		udelay(100);
 
 		if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
 			sky2_write8(hw, B2_Y2_CLK_GATE, 0);
@@ -1159,7 +1161,7 @@
 	count = sizeof(dma_addr_t) / sizeof(u32);
 	count += skb_shinfo(skb)->nr_frags * count;
 
-	if (skb_shinfo(skb)->gso_size)
+	if (skb_is_gso(skb))
 		++count;
 
 	if (skb->ip_summed == CHECKSUM_HW)
@@ -1389,7 +1391,7 @@
 	}
 
 	sky2->tx_cons = put;
-	if (tx_avail(sky2) > MAX_SKB_TX_LE)
+	if (tx_avail(sky2) > MAX_SKB_TX_LE + 4)
 		netif_wake_queue(dev);
 }
 
@@ -1888,9 +1890,6 @@
 	re->skb->ip_summed = CHECKSUM_NONE;
 	sky2_rx_add(sky2, re->mapaddr);
 
-	/* Tell receiver about new buffers. */
-	sky2_put_idx(sky2->hw, rxqaddr[sky2->port], sky2->rx_put);
-
 	return skb;
 
 oversize:
@@ -1937,7 +1936,9 @@
 /* Process status response ring */
 static int sky2_status_intr(struct sky2_hw *hw, int to_do)
 {
+	struct sky2_port *sky2;
 	int work_done = 0;
+	unsigned buf_write[2] = { 0, 0 };
 	u16 hwidx = sky2_read16(hw, STAT_PUT_IDX);
 
 	rmb();
@@ -1945,7 +1946,6 @@
 	while (hw->st_idx != hwidx) {
 		struct sky2_status_le *le  = hw->st_le + hw->st_idx;
 		struct net_device *dev;
-		struct sky2_port *sky2;
 		struct sk_buff *skb;
 		u32 status;
 		u16 length;
@@ -1978,6 +1978,14 @@
 #endif
 				netif_receive_skb(skb);
 
+			/* Update receiver after 16 frames */
+			if (++buf_write[le->link] == RX_BUF_WRITE) {
+				sky2_put_idx(hw, rxqaddr[le->link],
+					     sky2->rx_put);
+				buf_write[le->link] = 0;
+			}
+
+			/* Stop after net poll weight */
 			if (++work_done >= to_do)
 				goto exit_loop;
 			break;
@@ -2016,6 +2024,16 @@
 	}
 
 exit_loop:
+	if (buf_write[0]) {
+		sky2 = netdev_priv(hw->dev[0]);
+		sky2_put_idx(hw, Q_R1, sky2->rx_put);
+	}
+
+	if (buf_write[1]) {
+		sky2 = netdev_priv(hw->dev[1]);
+		sky2_put_idx(hw, Q_R2, sky2->rx_put);
+	}
+
 	return work_done;
 }
 
@@ -2286,7 +2304,7 @@
 }
 
 
-static int __devinit sky2_reset(struct sky2_hw *hw)
+static int sky2_reset(struct sky2_hw *hw)
 {
 	u16 status;
 	u8 t8, pmd_type;
@@ -3437,17 +3455,14 @@
 		return -EINVAL;
 
 	del_timer_sync(&hw->idle_timer);
+	netif_poll_disable(hw->dev[0]);
 
 	for (i = 0; i < hw->ports; i++) {
 		struct net_device *dev = hw->dev[i];
 
-		if (dev) {
-			if (!netif_running(dev))
-				continue;
-
+		if (netif_running(dev)) {
 			sky2_down(dev);
 			netif_device_detach(dev);
-			netif_poll_disable(dev);
 		}
 	}
 
@@ -3474,9 +3489,8 @@
 
 	for (i = 0; i < hw->ports; i++) {
 		struct net_device *dev = hw->dev[i];
-		if (dev && netif_running(dev)) {
+		if (netif_running(dev)) {
 			netif_device_attach(dev);
-			netif_poll_enable(dev);
 
 			err = sky2_up(dev);
 			if (err) {
@@ -3488,6 +3502,7 @@
 		}
 	}
 
+	netif_poll_enable(hw->dev[0]);
 	sky2_idle_start(hw);
 out:
 	return err;
diff -urN linux-2.6.18-rc1/drivers/net/sky2.h linux-2.6.18-rc2/drivers/net/sky2.h
--- linux-2.6.18-rc1/drivers/net/sky2.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/net/sky2.h	2006-07-15 22:34:47.909576288 +0000
@@ -1480,7 +1480,7 @@
 	GM_TXCR_FORCE_JAM	= 1<<15, /* Bit 15:	Force Jam / Flow-Control */
 	GM_TXCR_CRC_DIS		= 1<<14, /* Bit 14:	Disable insertion of CRC */
 	GM_TXCR_PAD_DIS		= 1<<13, /* Bit 13:	Disable padding of packets */
-	GM_TXCR_COL_THR_MSK	= 1<<10, /* Bit 12..10:	Collision Threshold */
+	GM_TXCR_COL_THR_MSK	= 7<<10, /* Bit 12..10:	Collision Threshold */
 };
 
 #define TX_COL_THR(x)		(((x)<<10) & GM_TXCR_COL_THR_MSK)
diff -urN linux-2.6.18-rc1/drivers/net/smc91x.h linux-2.6.18-rc2/drivers/net/smc91x.h
--- linux-2.6.18-rc1/drivers/net/smc91x.h	2006-07-15 22:34:42.645004829 +0000
+++ linux-2.6.18-rc2/drivers/net/smc91x.h	2006-07-15 22:34:47.917577157 +0000
@@ -354,6 +354,24 @@
 
 #define SMC_IRQ_FLAGS		(0)
 
+#elif	defined(CONFIG_ARCH_VERSATILE)
+
+#define SMC_CAN_USE_8BIT	1
+#define SMC_CAN_USE_16BIT	1
+#define SMC_CAN_USE_32BIT	1
+#define SMC_NOWAIT		1
+
+#define SMC_inb(a, r)		readb((a) + (r))
+#define SMC_inw(a, r)		readw((a) + (r))
+#define SMC_inl(a, r)		readl((a) + (r))
+#define SMC_outb(v, a, r)	writeb(v, (a) + (r))
+#define SMC_outw(v, a, r)	writew(v, (a) + (r))
+#define SMC_outl(v, a, r)	writel(v, (a) + (r))
+#define SMC_insl(a, r, p, l)	readsl((a) + (r), p, l)
+#define SMC_outsl(a, r, p, l)	writesl((a) + (r), p, l)
+
+#define SMC_IRQ_FLAGS		(0)
+
 #else
 
 #define SMC_CAN_USE_8BIT	1
diff -urN linux-2.6.18-rc1/drivers/net/tg3.c linux-2.6.18-rc2/drivers/net/tg3.c
--- linux-2.6.18-rc1/drivers/net/tg3.c	2006-07-15 22:34:42.657006131 +0000
+++ linux-2.6.18-rc2/drivers/net/tg3.c	2006-07-15 22:34:47.929578460 +0000
@@ -10078,6 +10078,8 @@
 	static struct pci_device_id write_reorder_chipsets[] = {
 		{ PCI_DEVICE(PCI_VENDOR_ID_AMD,
 		             PCI_DEVICE_ID_AMD_FE_GATE_700C) },
+		{ PCI_DEVICE(PCI_VENDOR_ID_AMD,
+		             PCI_DEVICE_ID_AMD_8131_BRIDGE) },
 		{ PCI_DEVICE(PCI_VENDOR_ID_VIA,
 			     PCI_DEVICE_ID_VIA_8385_0) },
 		{ },
diff -urN linux-2.6.18-rc1/drivers/net/typhoon.c linux-2.6.18-rc2/drivers/net/typhoon.c
--- linux-2.6.18-rc1/drivers/net/typhoon.c	2006-07-15 22:34:42.681008737 +0000
+++ linux-2.6.18-rc2/drivers/net/typhoon.c	2006-07-15 22:34:47.953581065 +0000
@@ -805,7 +805,7 @@
 	 * If problems develop with TSO, check this first.
 	 */
 	numDesc = skb_shinfo(skb)->nr_frags + 1;
-	if(skb_tso_size(skb))
+	if (skb_is_gso(skb))
 		numDesc++;
 
 	/* When checking for free space in the ring, we need to also
@@ -845,7 +845,7 @@
 				TYPHOON_TX_PF_VLAN_TAG_SHIFT);
 	}
 
-	if(skb_tso_size(skb)) {
+	if (skb_is_gso(skb)) {
 		first_txd->processFlags |= TYPHOON_TX_PF_TCP_SEGMENT;
 		first_txd->numDesc++;
 
diff -urN linux-2.6.18-rc1/drivers/net/wan/c101.c linux-2.6.18-rc2/drivers/net/wan/c101.c
--- linux-2.6.18-rc1/drivers/net/wan/c101.c	2006-07-15 22:34:42.681008737 +0000
+++ linux-2.6.18-rc2/drivers/net/wan/c101.c	2006-07-15 22:34:47.957581499 +0000
@@ -116,27 +116,33 @@
 #include "hd6457x.c"
 
 
+static inline void set_carrier(port_t *port)
+{
+	if (!sca_in(MSCI1_OFFSET + ST3, port) & ST3_DCD)
+		netif_carrier_on(port_to_dev(port));
+	else
+		netif_carrier_off(port_to_dev(port));
+}
+
+
 static void sca_msci_intr(port_t *port)
 {
-	struct net_device *dev = port_to_dev(port);
-	card_t* card = port_to_card(port);
-	u8 stat = sca_in(MSCI1_OFFSET + ST1, card); /* read MSCI ST1 status */
+	u8 stat = sca_in(MSCI1_OFFSET + ST1, port); /* read MSCI ST1 status */
 
 	/* Reset MSCI TX underrun status bit */
-	sca_out(stat & ST1_UDRN, MSCI0_OFFSET + ST1, card);
+	sca_out(stat & ST1_UDRN, MSCI0_OFFSET + ST1, port);
 
 	if (stat & ST1_UDRN) {
-		struct net_device_stats *stats = hdlc_stats(dev);
+		struct net_device_stats *stats = hdlc_stats(port_to_dev(port));
 		stats->tx_errors++; /* TX Underrun error detected */
 		stats->tx_fifo_errors++;
 	}
 
 	/* Reset MSCI CDCD status bit - uses ch#2 DCD input */
-	sca_out(stat & ST1_CDCD, MSCI1_OFFSET + ST1, card);
+	sca_out(stat & ST1_CDCD, MSCI1_OFFSET + ST1, port);
 
 	if (stat & ST1_CDCD)
-		hdlc_set_carrier(!(sca_in(MSCI1_OFFSET + ST3, card) & ST3_DCD),
-				 dev);
+		set_carrier(port);
 }
 
 
@@ -190,7 +196,7 @@
 	sca_out(IE1_UDRN, MSCI0_OFFSET + IE1, port);
 	sca_out(IE0_TXINT, MSCI0_OFFSET + IE0, port);
 
-	hdlc_set_carrier(!(sca_in(MSCI1_OFFSET + ST3, port) & ST3_DCD), dev);
+	set_carrier(port);
 	printk(KERN_DEBUG "0x%X\n", sca_in(MSCI1_OFFSET + ST3, port));
 
 	/* enable MSCI1 CDCD interrupt */
@@ -378,7 +384,7 @@
 	}
 
 	sca_init_sync_port(card); /* Set up C101 memory */
-	hdlc_set_carrier(!(sca_in(MSCI1_OFFSET + ST3, card) & ST3_DCD), dev);
+	set_carrier(card);
 
 	printk(KERN_INFO "%s: Moxa C101 on IRQ%u,"
 	       " using %u TX + %u RX packets rings\n",
diff -urN linux-2.6.18-rc1/drivers/net/wan/hd6457x.c linux-2.6.18-rc2/drivers/net/wan/hd6457x.c
--- linux-2.6.18-rc1/drivers/net/wan/hd6457x.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/net/wan/hd6457x.c	2006-07-15 22:34:47.961581934 +0000
@@ -168,6 +168,23 @@
 }
 
 
+static inline void sca_set_carrier(port_t *port)
+{
+	if (!(sca_in(get_msci(port) + ST3, port_to_card(port)) & ST3_DCD)) {
+#ifdef DEBUG_LINK
+		printk(KERN_DEBUG "%s: sca_set_carrier on\n",
+		       port_to_dev(port)->name);
+#endif
+		netif_carrier_on(port_to_dev(port));
+	} else {
+#ifdef DEBUG_LINK
+		printk(KERN_DEBUG "%s: sca_set_carrier off\n",
+		       port_to_dev(port)->name);
+#endif
+		netif_carrier_off(port_to_dev(port));
+	}
+}
+
 
 static void sca_init_sync_port(port_t *port)
 {
@@ -237,9 +254,7 @@
 			sca_out(DIR_BOFE, DIR_TX(phy_node(port)), card);
 		}
 	}
-
-	hdlc_set_carrier(!(sca_in(get_msci(port) + ST3, card) & ST3_DCD),
-			 port_to_dev(port));
+	sca_set_carrier(port);
 }
 
 
@@ -262,8 +277,7 @@
 	}
 
 	if (stat & ST1_CDCD)
-		hdlc_set_carrier(!(sca_in(msci + ST3, card) & ST3_DCD),
-				 port_to_dev(port));
+		sca_set_carrier(port);
 }
 #endif
 
@@ -566,7 +580,7 @@
    - all DMA interrupts
 */
 
-	hdlc_set_carrier(!(sca_in(msci + ST3, card) & ST3_DCD), dev);
+	sca_set_carrier(port);
 
 #ifdef __HD64570_H
 	/* MSCI TX INT and RX INT A IRQ enable */
diff -urN linux-2.6.18-rc1/drivers/net/wan/hdlc_cisco.c linux-2.6.18-rc2/drivers/net/wan/hdlc_cisco.c
--- linux-2.6.18-rc1/drivers/net/wan/hdlc_cisco.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/net/wan/hdlc_cisco.c	2006-07-15 22:34:47.961581934 +0000
@@ -192,9 +192,7 @@
 					       "uptime %ud%uh%um%us)\n",
 					       dev->name, days, hrs,
 					       min, sec);
-#if 0
-					netif_carrier_on(dev);
-#endif
+					netif_dormant_off(dev);
 					hdlc->state.cisco.up = 1;
 				}
 			}
@@ -227,9 +225,7 @@
 		       hdlc->state.cisco.settings.timeout * HZ)) {
 		hdlc->state.cisco.up = 0;
 		printk(KERN_INFO "%s: Link down\n", dev->name);
-#if 0
-		netif_carrier_off(dev);
-#endif
+		netif_dormant_on(dev);
 	}
 
 	cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ,
@@ -265,10 +261,7 @@
 {
 	hdlc_device *hdlc = dev_to_hdlc(dev);
 	del_timer_sync(&hdlc->state.cisco.timer);
-#if 0
-	if (netif_carrier_ok(dev))
-		netif_carrier_off(dev);
-#endif
+	netif_dormant_on(dev);
 	hdlc->state.cisco.up = 0;
 	hdlc->state.cisco.request_sent = 0;
 }
@@ -328,6 +321,7 @@
 		dev->type = ARPHRD_CISCO;
 		dev->flags = IFF_POINTOPOINT | IFF_NOARP;
 		dev->addr_len = 0;
+		netif_dormant_on(dev);
 		return 0;
 	}
 
diff -urN linux-2.6.18-rc1/drivers/net/wan/hdlc_fr.c linux-2.6.18-rc2/drivers/net/wan/hdlc_fr.c
--- linux-2.6.18-rc1/drivers/net/wan/hdlc_fr.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/net/wan/hdlc_fr.c	2006-07-15 22:34:47.961581934 +0000
@@ -301,7 +301,7 @@
 	if (pvc->open_count++ == 0) {
 		hdlc_device *hdlc = dev_to_hdlc(pvc->master);
 		if (hdlc->state.fr.settings.lmi == LMI_NONE)
-			pvc->state.active = hdlc->carrier;
+			pvc->state.active = netif_carrier_ok(pvc->master);
 
 		pvc_carrier(pvc->state.active, pvc);
 		hdlc->state.fr.dce_changed = 1;
@@ -545,11 +545,7 @@
 
 	hdlc->state.fr.reliable = reliable;
 	if (reliable) {
-#if 0
-		if (!netif_carrier_ok(dev))
-			netif_carrier_on(dev);
-#endif
-
+		netif_dormant_off(dev);
 		hdlc->state.fr.n391cnt = 0; /* Request full status */
 		hdlc->state.fr.dce_changed = 1;
 
@@ -562,11 +558,7 @@
 			}
 		}
 	} else {
-#if 0
-		if (netif_carrier_ok(dev))
-			netif_carrier_off(dev);
-#endif
-
+		netif_dormant_on(dev);
 		while (pvc) {		/* Deactivate all PVCs */
 			pvc_carrier(0, pvc);
 			pvc->state.exist = pvc->state.active = 0;
diff -urN linux-2.6.18-rc1/drivers/net/wan/hdlc_generic.c linux-2.6.18-rc2/drivers/net/wan/hdlc_generic.c
--- linux-2.6.18-rc1/drivers/net/wan/hdlc_generic.c	2006-07-15 22:34:42.685009171 +0000
+++ linux-2.6.18-rc2/drivers/net/wan/hdlc_generic.c	2006-07-15 22:34:47.961581934 +0000
@@ -34,10 +34,11 @@
 #include <linux/inetdevice.h>
 #include <linux/lapb.h>
 #include <linux/rtnetlink.h>
+#include <linux/notifier.h>
 #include <linux/hdlc.h>
 
 
-static const char* version = "HDLC support module revision 1.18";
+static const char* version = "HDLC support module revision 1.19";
 
 #undef DEBUG_LINK
 
@@ -73,57 +74,51 @@
 
 
 
-static void __hdlc_set_carrier_on(struct net_device *dev)
+static inline void hdlc_proto_start(struct net_device *dev)
 {
 	hdlc_device *hdlc = dev_to_hdlc(dev);
 	if (hdlc->proto.start)
 		return hdlc->proto.start(dev);
-#if 0
-#ifdef DEBUG_LINK
-	if (netif_carrier_ok(dev))
-		printk(KERN_ERR "hdlc_set_carrier_on(): already on\n");
-#endif
-	netif_carrier_on(dev);
-#endif
 }
 
 
 
-static void __hdlc_set_carrier_off(struct net_device *dev)
+static inline void hdlc_proto_stop(struct net_device *dev)
 {
 	hdlc_device *hdlc = dev_to_hdlc(dev);
 	if (hdlc->proto.stop)
 		return hdlc->proto.stop(dev);
-
-#if 0
-#ifdef DEBUG_LINK
-	if (!netif_carrier_ok(dev))
-		printk(KERN_ERR "hdlc_set_carrier_off(): already off\n");
-#endif
-	netif_carrier_off(dev);
-#endif
 }
 
 
 
-void hdlc_set_carrier(int on, struct net_device *dev)
+static int hdlc_device_event(struct notifier_block *this, unsigned long event,
+			     void *ptr)
 {
-	hdlc_device *hdlc = dev_to_hdlc(dev);
+	struct net_device *dev = ptr;
+	hdlc_device *hdlc;
 	unsigned long flags;
-	on = on ? 1 : 0;
+	int on;
+ 
+	if (dev->get_stats != hdlc_get_stats)
+		return NOTIFY_DONE; /* not an HDLC device */
+ 
+	if (event != NETDEV_CHANGE)
+		return NOTIFY_DONE; /* Only interrested in carrier changes */
+
+	on = netif_carrier_ok(dev);
 
 #ifdef DEBUG_LINK
-	printk(KERN_DEBUG "hdlc_set_carrier %i\n", on);
+	printk(KERN_DEBUG "%s: hdlc_device_event NETDEV_CHANGE, carrier %i\n",
+	       dev->name, on);
 #endif
 
+	hdlc = dev_to_hdlc(dev);
 	spin_lock_irqsave(&hdlc->state_lock, flags);
 
 	if (hdlc->carrier == on)
 		goto carrier_exit; /* no change in DCD line level */
 
-#ifdef DEBUG_LINK
-	printk(KERN_INFO "%s: carrier %s\n", dev->name, on ? "ON" : "off");
-#endif
 	hdlc->carrier = on;
 
 	if (!hdlc->open)
@@ -131,14 +126,15 @@
 
 	if (hdlc->carrier) {
 		printk(KERN_INFO "%s: Carrier detected\n", dev->name);
-		__hdlc_set_carrier_on(dev);
+		hdlc_proto_start(dev);
 	} else {
 		printk(KERN_INFO "%s: Carrier lost\n", dev->name);
-		__hdlc_set_carrier_off(dev);
+		hdlc_proto_stop(dev);
 	}
 
 carrier_exit:
 	spin_unlock_irqrestore(&hdlc->state_lock, flags);
+	return NOTIFY_DONE;
 }
 
 
@@ -165,7 +161,7 @@
 
 	if (hdlc->carrier) {
 		printk(KERN_INFO "%s: Carrier detected\n", dev->name);
-		__hdlc_set_carrier_on(dev);
+		hdlc_proto_start(dev);
 	} else
 		printk(KERN_INFO "%s: No carrier\n", dev->name);
 
@@ -190,7 +186,7 @@
 
 	hdlc->open = 0;
 	if (hdlc->carrier)
-		__hdlc_set_carrier_off(dev);
+		hdlc_proto_stop(dev);
 
 	spin_unlock_irq(&hdlc->state_lock);
 
@@ -303,7 +299,6 @@
 
 EXPORT_SYMBOL(hdlc_open);
 EXPORT_SYMBOL(hdlc_close);
-EXPORT_SYMBOL(hdlc_set_carrier);
 EXPORT_SYMBOL(hdlc_ioctl);
 EXPORT_SYMBOL(hdlc_setup);
 EXPORT_SYMBOL(alloc_hdlcdev);
@@ -315,9 +310,18 @@
 };
 
 
+static struct notifier_block hdlc_notifier = {
+        .notifier_call = hdlc_device_event,
+};
+
+
 static int __init hdlc_module_init(void)
 {
+	int result;
+
 	printk(KERN_INFO "%s\n", version);
+	if ((result = register_netdevice_notifier(&hdlc_notifier)) != 0)
+                return result;
         dev_add_pack(&hdlc_packet_type);
 	return 0;
 }
@@ -327,6 +331,7 @@
 static void __exit hdlc_module_exit(void)
 {
 	dev_remove_pack(&hdlc_packet_type);
+	unregister_netdevice_notifier(&hdlc_notifier);
 }
 
 
diff -urN linux-2.6.18-rc1/drivers/net/wan/wanxl.c linux-2.6.18-rc2/drivers/net/wan/wanxl.c
--- linux-2.6.18-rc1/drivers/net/wan/wanxl.c	2006-07-15 22:34:42.689009605 +0000
+++ linux-2.6.18-rc2/drivers/net/wan/wanxl.c	2006-07-15 22:34:47.965582368 +0000
@@ -149,7 +149,10 @@
 	printk(KERN_INFO "%s: %s%s module, %s cable%s%s\n",
 	       port->dev->name, pm, dte, cable, dsr, dcd);
 
-	hdlc_set_carrier(value & STATUS_CABLE_DCD, port->dev);
+	if (value & STATUS_CABLE_DCD)
+		netif_carrier_on(port->dev);
+	else
+		netif_carrier_off(port->dev);
 }
 
 
diff -urN linux-2.6.18-rc1/drivers/net/wireless/bcm43xx/bcm43xx_main.c linux-2.6.18-rc2/drivers/net/wireless/bcm43xx/bcm43xx_main.c
--- linux-2.6.18-rc1/drivers/net/wireless/bcm43xx/bcm43xx_main.c	2006-07-15 22:34:42.701010908 +0000
+++ linux-2.6.18-rc2/drivers/net/wireless/bcm43xx/bcm43xx_main.c	2006-07-15 22:34:47.977583670 +0000
@@ -1547,7 +1547,7 @@
 		goto generate_new;
 
 	/* Get the noise samples. */
-	assert(bcm->noisecalc.nr_samples <= 8);
+	assert(bcm->noisecalc.nr_samples < 8);
 	i = bcm->noisecalc.nr_samples;
 	noise[0] = limit_value(noise[0], 0, ARRAY_SIZE(radio->nrssi_lt) - 1);
 	noise[1] = limit_value(noise[1], 0, ARRAY_SIZE(radio->nrssi_lt) - 1);
diff -urN linux-2.6.18-rc1/drivers/net/wireless/spectrum_cs.c linux-2.6.18-rc2/drivers/net/wireless/spectrum_cs.c
--- linux-2.6.18-rc1/drivers/net/wireless/spectrum_cs.c	2006-07-15 22:34:42.725013513 +0000
+++ linux-2.6.18-rc2/drivers/net/wireless/spectrum_cs.c	2006-07-15 22:34:48.001586276 +0000
@@ -34,8 +34,6 @@
 
 #include "orinoco.h"
 
-static unsigned char *primsym;
-static unsigned char *secsym;
 static const char primary_fw_name[] = "symbol_sp24t_prim_fw";
 static const char secondary_fw_name[] = "symbol_sp24t_sec_fw";
 
@@ -440,7 +438,7 @@
  */
 static int
 spectrum_dl_image(hermes_t *hw, struct pcmcia_device *link,
-		  const unsigned char *image)
+		  const unsigned char *image, int secondary)
 {
 	int ret;
 	const unsigned char *ptr;
@@ -455,7 +453,7 @@
 	first_block = (const struct dblock *) ptr;
 
 	/* Read the PDA */
-	if (image != primsym) {
+	if (secondary) {
 		ret = spectrum_read_pda(hw, pda, sizeof(pda));
 		if (ret)
 			return ret;
@@ -472,7 +470,7 @@
 		return ret;
 
 	/* Write the PDA to the adapter */
-	if (image != primsym) {
+	if (secondary) {
 		ret = spectrum_apply_pda(hw, first_block, pda);
 		if (ret)
 			return ret;
@@ -487,7 +485,7 @@
 	ret = hermes_init(hw);
 
 	/* hermes_reset() should return 0 with the secondary firmware */
-	if (image != primsym && ret != 0)
+	if (secondary && ret != 0)
 		return -ENODEV;
 
 	/* And this should work with any firmware */
@@ -509,33 +507,30 @@
 	const struct firmware *fw_entry;
 
 	if (request_firmware(&fw_entry, primary_fw_name,
-			     &handle_to_dev(link)) == 0) {
-		primsym = fw_entry->data;
-	} else {
+			     &handle_to_dev(link)) != 0) {
 		printk(KERN_ERR PFX "Cannot find firmware: %s\n",
 		       primary_fw_name);
 		return -ENOENT;
 	}
 
-	if (request_firmware(&fw_entry, secondary_fw_name,
-			     &handle_to_dev(link)) == 0) {
-		secsym = fw_entry->data;
-	} else {
-		printk(KERN_ERR PFX "Cannot find firmware: %s\n",
-		       secondary_fw_name);
-		return -ENOENT;
-	}
-
 	/* Load primary firmware */
-	ret = spectrum_dl_image(hw, link, primsym);
+	ret = spectrum_dl_image(hw, link, fw_entry->data, 0);
+	release_firmware(fw_entry);
 	if (ret) {
 		printk(KERN_ERR PFX "Primary firmware download failed\n");
 		return ret;
 	}
 
-	/* Load secondary firmware */
-	ret = spectrum_dl_image(hw, link, secsym);
+	if (request_firmware(&fw_entry, secondary_fw_name,
+			     &handle_to_dev(link)) != 0) {
+		printk(KERN_ERR PFX "Cannot find firmware: %s\n",
+		       secondary_fw_name);
+		return -ENOENT;
+	}
 
+	/* Load secondary firmware */
+	ret = spectrum_dl_image(hw, link, fw_entry->data, 1);
+	release_firmware(fw_entry);
 	if (ret) {
 		printk(KERN_ERR PFX "Secondary firmware download failed\n");
 	}
diff -urN linux-2.6.18-rc1/drivers/net/wireless/zd1211rw/zd_usb.c linux-2.6.18-rc2/drivers/net/wireless/zd1211rw/zd_usb.c
--- linux-2.6.18-rc1/drivers/net/wireless/zd1211rw/zd_usb.c	2006-07-15 22:34:42.737014816 +0000
+++ linux-2.6.18-rc2/drivers/net/wireless/zd1211rw/zd_usb.c	2006-07-15 22:34:48.013587579 +0000
@@ -375,10 +375,8 @@
 	case -ENODEV:
 	case -ENOENT:
 	case -ECONNRESET:
-		goto kfree;
 	case -EPIPE:
-		usb_clear_halt(urb->dev, EP_INT_IN);
-		/* FALL-THROUGH */
+		goto kfree;
 	default:
 		goto resubmit;
 	}
@@ -580,10 +578,8 @@
 	case -ENODEV:
 	case -ENOENT:
 	case -ECONNRESET:
-		return;
 	case -EPIPE:
-		usb_clear_halt(urb->dev, EP_DATA_IN);
-		/* FALL-THROUGH */
+		return;
 	default:
 		dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
 		goto resubmit;
@@ -749,11 +745,9 @@
 	case -ENODEV:
 	case -ENOENT:
 	case -ECONNRESET:
+	case -EPIPE:
 		dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
 		break;
-	case -EPIPE:
-		usb_clear_halt(urb->dev, EP_DATA_OUT);
-		/* FALL-THROUGH */
 	default:
 		dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status);
 		goto resubmit;
diff -urN linux-2.6.18-rc1/drivers/pci/hotplug/Kconfig linux-2.6.18-rc2/drivers/pci/hotplug/Kconfig
--- linux-2.6.18-rc1/drivers/pci/hotplug/Kconfig	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/pci/hotplug/Kconfig	2006-07-15 22:34:48.025588881 +0000
@@ -6,8 +6,7 @@
 
 config HOTPLUG_PCI
 	tristate "Support for PCI Hotplug (EXPERIMENTAL)"
-	depends on PCI && EXPERIMENTAL
-	select HOTPLUG
+	depends on PCI && EXPERIMENTAL && HOTPLUG
 	---help---
 	  Say Y here if you have a motherboard with a PCI Hotplug controller.
 	  This allows you to add and remove PCI cards while the machine is
@@ -77,7 +76,7 @@
 
 config HOTPLUG_PCI_ACPI
 	tristate "ACPI PCI Hotplug driver"
-	depends on ACPI && HOTPLUG_PCI
+	depends on ACPI_DOCK && HOTPLUG_PCI
 	help
 	  Say Y here if you have a system that supports PCI Hotplug using
 	  ACPI.
diff -urN linux-2.6.18-rc1/drivers/pci/msi.c linux-2.6.18-rc2/drivers/pci/msi.c
--- linux-2.6.18-rc1/drivers/pci/msi.c	2006-07-15 22:34:42.765017856 +0000
+++ linux-2.6.18-rc2/drivers/pci/msi.c	2006-07-15 22:34:48.041590618 +0000
@@ -47,13 +47,13 @@
 
 static void msi_cache_ctor(void *p, kmem_cache_t *cache, unsigned long flags)
 {
-	memset(p, 0, NR_IRQS * sizeof(struct msi_desc));
+	memset(p, 0, sizeof(struct msi_desc));
 }
 
 static int msi_cache_init(void)
 {
 	msi_cachep = kmem_cache_create("msi_cache",
-			NR_IRQS * sizeof(struct msi_desc),
+			sizeof(struct msi_desc),
 		       	0, SLAB_HWCACHE_ALIGN, msi_cache_ctor, NULL);
 	if (!msi_cachep)
 		return -ENOMEM;
diff -urN linux-2.6.18-rc1/drivers/pci/pci.c linux-2.6.18-rc2/drivers/pci/pci.c
--- linux-2.6.18-rc1/drivers/pci/pci.c	2006-07-15 22:34:42.765017856 +0000
+++ linux-2.6.18-rc2/drivers/pci/pci.c	2006-07-15 22:34:48.041590618 +0000
@@ -19,6 +19,7 @@
 #include <asm/dma.h>	/* isa_dma_bridge_buggy */
 #include "pci.h"
 
+unsigned int pci_pm_d3_delay = 10;
 
 /**
  * pci_bus_max_busnr - returns maximum PCI bus number of given bus' children
@@ -313,6 +314,14 @@
 	} else if (dev->current_state == state)
 		return 0;        /* we're already there */
 
+	/*
+	 * If the device or the parent bridge can't support PCI PM, ignore
+	 * the request if we're doing anything besides putting it into D0
+	 * (which would only happen on boot).
+	 */
+	if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
+		return 0;
+
 	/* find PCI PM capability in list */
 	pm = pci_find_capability(dev, PCI_CAP_ID_PM);
 	
@@ -363,7 +372,7 @@
 	/* Mandatory power management transition delays */
 	/* see PCI PM 1.1 5.6.1 table 18 */
 	if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
-		msleep(10);
+		msleep(pci_pm_d3_delay);
 	else if (state == PCI_D2 || dev->current_state == PCI_D2)
 		udelay(200);
 
diff -urN linux-2.6.18-rc1/drivers/pci/pci.h linux-2.6.18-rc2/drivers/pci/pci.h
--- linux-2.6.18-rc1/drivers/pci/pci.h	2006-07-15 22:34:42.765017856 +0000
+++ linux-2.6.18-rc2/drivers/pci/pci.h	2006-07-15 22:34:48.041590618 +0000
@@ -47,7 +47,7 @@
 #else
 #define pci_msi_quirk 0
 #endif
-
+extern unsigned int pci_pm_d3_delay;
 #ifdef CONFIG_PCI_MSI
 void disable_msi_mode(struct pci_dev *dev, int pos, int type);
 void pci_no_msi(void);
@@ -66,7 +66,15 @@
 static inline void pci_restore_msi_state(struct pci_dev *dev) {}
 static inline void pci_restore_msix_state(struct pci_dev *dev) {}
 #endif
+static inline int pci_no_d1d2(struct pci_dev *dev)
+{
+	unsigned int parent_dstates = 0;
 
+	if (dev->bus->self)
+		parent_dstates = dev->bus->self->no_d1d2;
+	return (dev->no_d1d2 || parent_dstates);
+
+}
 extern int pcie_mch_quirk;
 extern struct device_attribute pci_dev_attrs[];
 extern struct class_device_attribute class_device_attr_cpuaffinity;
diff -urN linux-2.6.18-rc1/drivers/pci/probe.c linux-2.6.18-rc2/drivers/pci/probe.c
--- linux-2.6.18-rc1/drivers/pci/probe.c	2006-07-15 22:34:42.765017856 +0000
+++ linux-2.6.18-rc2/drivers/pci/probe.c	2006-07-15 22:34:48.041590618 +0000
@@ -815,6 +815,7 @@
 	dev->vendor = l & 0xffff;
 	dev->device = (l >> 16) & 0xffff;
 	dev->cfg_size = pci_cfg_space_size(dev);
+	dev->error_state = pci_channel_io_normal;
 
 	/* Assume 32-bit PCI; let 64-bit PCI cards (which are far rarer)
 	   set this higher, assuming the system even supports it.  */
diff -urN linux-2.6.18-rc1/drivers/pci/quirks.c linux-2.6.18-rc2/drivers/pci/quirks.c
--- linux-2.6.18-rc1/drivers/pci/quirks.c	2006-07-15 22:34:42.769018290 +0000
+++ linux-2.6.18-rc2/drivers/pci/quirks.c	2006-07-15 22:34:48.045591053 +0000
@@ -400,6 +400,7 @@
 	piix4_io_quirk(dev, "PIIX4 devres J", 0x7c, 1 << 20);
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82371AB_3,	quirk_piix4_acpi );
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82443MX_3,	quirk_piix4_acpi );
 
 /*
  * ICH4, ICH4-M, ICH5, ICH5-M ACPI: Three IO regions pointed to by longwords at
@@ -682,6 +683,33 @@
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C597_0,	quirk_vt82c598_id );
 
+#ifdef CONFIG_ACPI_SLEEP
+
+/*
+ * Some VIA systems boot with the abnormal status flag set. This can cause
+ * the BIOS to re-POST the system on resume rather than passing control
+ * back to the OS.  Clear the flag on boot
+ */
+static void __devinit quirk_via_abnormal_poweroff(struct pci_dev *dev)
+{
+	u32 reg;
+
+	acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1_STATUS,
+				&reg);
+
+	if (reg & 0x800) {
+		printk("Clearing abnormal poweroff flag\n");
+		acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
+					ACPI_REGISTER_PM1_STATUS,
+					(u16)0x800);
+	}
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_abnormal_poweroff);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_abnormal_poweroff);
+
+#endif
+
 /*
  * CardBus controllers have a legacy base address that enables them
  * to respond as i82365 pcmcia controllers.  We don't want them to
@@ -1174,6 +1202,55 @@
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_963,		quirk_sis_96x_smbus );
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_LPC,		quirk_sis_96x_smbus );
 
+#if defined(CONFIG_SCSI_SATA) || defined(CONFIG_SCSI_SATA_MODULE)
+
+/*
+ *	If we are using libata we can drive this chip properly but must
+ *	do this early on to make the additional device appear during
+ *	the PCI scanning.
+ */
+
+static void __devinit quirk_jmicron_dualfn(struct pci_dev *pdev)
+{
+	u32 conf;
+	u8 hdr;
+
+	/* Only poke fn 0 */
+	if (PCI_FUNC(pdev->devfn))
+		return;
+
+	switch(pdev->device) {
+		case PCI_DEVICE_ID_JMICRON_JMB365:
+		case PCI_DEVICE_ID_JMICRON_JMB366:
+			/* Redirect IDE second PATA port to the right spot */
+			pci_read_config_dword(pdev, 0x80, &conf);
+			conf |= (1 << 24);
+			/* Fall through */
+			pci_write_config_dword(pdev, 0x80, conf);
+		case PCI_DEVICE_ID_JMICRON_JMB361:
+		case PCI_DEVICE_ID_JMICRON_JMB363:
+			pci_read_config_dword(pdev, 0x40, &conf);
+			/* Enable dual function mode, AHCI on fn 0, IDE fn1 */
+			/* Set the class codes correctly and then direct IDE 0 */
+			conf &= ~0x000F0200;	/* Clear bit 9 and 16-19 */
+			conf |=  0x00C20002;	/* Set bit 1, 17, 22, 23 */
+			pci_write_config_dword(pdev, 0x40, conf);
+
+			/* Reconfigure so that the PCI scanner discovers the
+			   device is now multifunction */
+
+			pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr);
+			pdev->hdr_type = hdr & 0x7f;
+			pdev->multifunction = !!(hdr & 0x80);
+
+			break;
+	}
+}
+
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, quirk_jmicron_dualfn);
+
+#endif
+
 #ifdef CONFIG_X86_IO_APIC
 static void __init quirk_alder_ioapic(struct pci_dev *pdev)
 {
@@ -1341,6 +1418,37 @@
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_PXH_1,	quirk_pcie_pxh);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_PXHV,	quirk_pcie_pxh);
 
+/*
+ * Some Intel PCI Express chipsets have trouble with downstream
+ * device power management.
+ */
+static void quirk_intel_pcie_pm(struct pci_dev * dev)
+{
+	pci_pm_d3_delay = 120;
+	dev->no_d1d2 = 1;
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x25e2, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x25e3, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x25e4, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x25e5, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x25e6, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x25e7, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x25f7, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x25f8, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x25f9, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x25fa, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x2601, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x2602, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x2603, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x2604, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x2605, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x2606, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x2607, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x2608, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x2609, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x260a, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x260b, quirk_intel_pcie_pm);
 
 /*
  * Fixup the cardbus bridges on the IBM Dock II docking station
diff -urN linux-2.6.18-rc1/drivers/pcmcia/Kconfig linux-2.6.18-rc2/drivers/pcmcia/Kconfig
--- linux-2.6.18-rc1/drivers/pcmcia/Kconfig	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/pcmcia/Kconfig	2006-07-15 22:34:48.045591053 +0000
@@ -6,7 +6,7 @@
 
 config PCCARD
 	tristate "PCCard (PCMCIA/CardBus) support"
-	select HOTPLUG
+	depends on HOTPLUG
 	---help---
 	  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
 	  computer.  These are credit-card size devices such as network cards,
diff -urN linux-2.6.18-rc1/drivers/rtc/Kconfig linux-2.6.18-rc2/drivers/rtc/Kconfig
--- linux-2.6.18-rc1/drivers/rtc/Kconfig	2006-07-15 22:34:42.781019593 +0000
+++ linux-2.6.18-rc2/drivers/rtc/Kconfig	2006-07-15 22:34:48.057592355 +0000
@@ -121,6 +121,16 @@
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-ds1553.
 
+config RTC_DRV_ISL1208
+	tristate "Intersil 1208"
+	depends on RTC_CLASS && I2C
+	help
+	  If you say yes here you get support for the
+	  Intersil 1208 RTC chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-isl1208.
+
 config RTC_DRV_DS1672
 	tristate "Dallas/Maxim DS1672"
 	depends on RTC_CLASS && I2C
diff -urN linux-2.6.18-rc1/drivers/rtc/Makefile linux-2.6.18-rc2/drivers/rtc/Makefile
--- linux-2.6.18-rc1/drivers/rtc/Makefile	2006-07-15 22:34:42.781019593 +0000
+++ linux-2.6.18-rc2/drivers/rtc/Makefile	2006-07-15 22:34:48.057592355 +0000
@@ -12,6 +12,7 @@
 obj-$(CONFIG_RTC_INTF_DEV)	+= rtc-dev.o
 
 obj-$(CONFIG_RTC_DRV_X1205)	+= rtc-x1205.o
+obj-$(CONFIG_RTC_DRV_ISL1208)	+= rtc-isl1208.o
 obj-$(CONFIG_RTC_DRV_TEST)	+= rtc-test.o
 obj-$(CONFIG_RTC_DRV_DS1307)	+= rtc-ds1307.o
 obj-$(CONFIG_RTC_DRV_DS1672)	+= rtc-ds1672.o
diff -urN linux-2.6.18-rc1/drivers/rtc/rtc-isl1208.c linux-2.6.18-rc2/drivers/rtc/rtc-isl1208.c
--- linux-2.6.18-rc1/drivers/rtc/rtc-isl1208.c	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/drivers/rtc/rtc-isl1208.c	2006-07-15 22:34:48.061592790 +0000
@@ -0,0 +1,591 @@
+/*
+ * Intersil ISL1208 rtc class driver
+ *
+ * Copyright 2005,2006 Hebert Valerio Riedel <hvr@gnu.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+
+#define DRV_NAME "isl1208"
+#define DRV_VERSION "0.2"
+
+/* Register map */
+/* rtc section */
+#define ISL1208_REG_SC  0x00
+#define ISL1208_REG_MN  0x01
+#define ISL1208_REG_HR  0x02
+#define ISL1208_REG_HR_MIL     (1<<7) /* 24h/12h mode */
+#define ISL1208_REG_HR_PM      (1<<5) /* PM/AM bit in 12h mode */
+#define ISL1208_REG_DT  0x03
+#define ISL1208_REG_MO  0x04
+#define ISL1208_REG_YR  0x05
+#define ISL1208_REG_DW  0x06
+#define ISL1208_RTC_SECTION_LEN 7
+
+/* control/status section */
+#define ISL1208_REG_SR  0x07
+#define ISL1208_REG_SR_ARST    (1<<7) /* auto reset */
+#define ISL1208_REG_SR_XTOSCB  (1<<6) /* crystal oscillator */
+#define ISL1208_REG_SR_WRTC    (1<<4) /* write rtc */
+#define ISL1208_REG_SR_ALM     (1<<2) /* alarm */
+#define ISL1208_REG_SR_BAT     (1<<1) /* battery */
+#define ISL1208_REG_SR_RTCF    (1<<0) /* rtc fail */
+#define ISL1208_REG_INT 0x08
+#define ISL1208_REG_09  0x09 /* reserved */
+#define ISL1208_REG_ATR 0x0a
+#define ISL1208_REG_DTR 0x0b
+
+/* alarm section */
+#define ISL1208_REG_SCA 0x0c
+#define ISL1208_REG_MNA 0x0d
+#define ISL1208_REG_HRA 0x0e
+#define ISL1208_REG_DTA 0x0f
+#define ISL1208_REG_MOA 0x10
+#define ISL1208_REG_DWA 0x11
+#define ISL1208_ALARM_SECTION_LEN 6
+
+/* user section */
+#define ISL1208_REG_USR1 0x12
+#define ISL1208_REG_USR2 0x13
+#define ISL1208_USR_SECTION_LEN 2
+
+/* i2c configuration */
+#define ISL1208_I2C_ADDR 0xde
+
+static unsigned short normal_i2c[] = {
+	ISL1208_I2C_ADDR>>1, I2C_CLIENT_END
+};
+I2C_CLIENT_INSMOD; /* defines addr_data */
+
+static int isl1208_attach_adapter(struct i2c_adapter *adapter);
+static int isl1208_detach_client(struct i2c_client *client);
+
+static struct i2c_driver isl1208_driver = {
+	.driver		= {
+		.name	= DRV_NAME,
+	},
+	.id		= I2C_DRIVERID_ISL1208,
+	.attach_adapter = &isl1208_attach_adapter,
+	.detach_client	= &isl1208_detach_client,
+};
+
+/* block read */
+static int
+isl1208_i2c_read_regs(struct i2c_client *client, u8 reg, u8 buf[],
+		       unsigned len)
+{
+	u8 reg_addr[1] = { reg };
+	struct i2c_msg msgs[2] = {
+		{ client->addr, client->flags, sizeof(reg_addr), reg_addr },
+		{ client->addr, client->flags | I2C_M_RD, len, buf }
+	};
+	int ret;
+
+	BUG_ON(len == 0);
+	BUG_ON(reg > ISL1208_REG_USR2);
+	BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
+
+	ret = i2c_transfer(client->adapter, msgs, 2);
+	if (ret > 0)
+		ret = 0;
+	return ret;
+}
+
+/* block write */
+static int
+isl1208_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[],
+		       unsigned len)
+{
+	u8 i2c_buf[ISL1208_REG_USR2 + 2];
+	struct i2c_msg msgs[1] = {
+		{ client->addr, client->flags, len + 1, i2c_buf }
+	};
+	int ret;
+
+	BUG_ON(len == 0);
+	BUG_ON(reg > ISL1208_REG_USR2);
+	BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
+
+	i2c_buf[0] = reg;
+	memcpy(&i2c_buf[1], &buf[0], len);
+
+	ret = i2c_transfer(client->adapter, msgs, 1);
+	if (ret > 0)
+		ret = 0;
+	return ret;
+}
+
+/* simple check to see wether we have a isl1208 */
+static int isl1208_i2c_validate_client(struct i2c_client *client)
+{
+	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
+	u8 zero_mask[ISL1208_RTC_SECTION_LEN] = {
+		0x80, 0x80, 0x40, 0xc0, 0xe0, 0x00, 0xf8
+	};
+	int i;
+	int ret;
+
+	ret = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < ISL1208_RTC_SECTION_LEN; ++i) {
+		if (regs[i] & zero_mask[i]) /* check if bits are cleared */
+			return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int isl1208_i2c_get_sr(struct i2c_client *client)
+{
+	return i2c_smbus_read_byte_data(client, ISL1208_REG_SR) == -1 ? -EIO:0;
+}
+
+static int isl1208_i2c_get_atr(struct i2c_client *client)
+{
+	int atr = i2c_smbus_read_byte_data(client, ISL1208_REG_ATR);
+
+	if (atr < 0)
+		return -EIO;
+
+	/* The 6bit value in the ATR register controls the load
+	 * capacitance C_load * in steps of 0.25pF
+	 *
+	 * bit (1<<5) of the ATR register is inverted
+	 *
+	 * C_load(ATR=0x20) =  4.50pF
+	 * C_load(ATR=0x00) = 12.50pF
+	 * C_load(ATR=0x1f) = 20.25pF
+	 *
+	 */
+
+	atr &= 0x3f; /* mask out lsb */
+	atr ^= 1<<5; /* invert 6th bit */
+	atr += 2*9; /* add offset of 4.5pF; unit[atr] = 0.25pF */
+
+	return atr;
+}
+
+static int isl1208_i2c_get_dtr(struct i2c_client *client)
+{
+	int dtr = i2c_smbus_read_byte_data(client, ISL1208_REG_DTR);
+
+	if (dtr < 0)
+		return -EIO;
+
+	/* dtr encodes adjustments of {-60,-40,-20,0,20,40,60} ppm */
+	dtr = ((dtr & 0x3) * 20) * (dtr & (1<<2) ? -1 : 1);
+
+	return dtr;
+}
+
+static int isl1208_i2c_get_usr(struct i2c_client *client)
+{
+	u8 buf[ISL1208_USR_SECTION_LEN] = { 0, };
+	int ret;
+
+	ret = isl1208_i2c_read_regs (client, ISL1208_REG_USR1, buf,
+				   ISL1208_USR_SECTION_LEN);
+	if (ret < 0)
+		return ret;
+
+	return (buf[1] << 8) | buf[0];
+}
+
+static int isl1208_i2c_set_usr(struct i2c_client *client, u16 usr)
+{
+	u8 buf[ISL1208_USR_SECTION_LEN];
+
+	buf[0] = usr & 0xff;
+	buf[1] = (usr >> 8) & 0xff;
+
+	return isl1208_i2c_set_regs (client, ISL1208_REG_USR1, buf,
+				     ISL1208_USR_SECTION_LEN);
+}
+
+static int isl1208_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+	struct i2c_client *const client = to_i2c_client(dev);
+	int sr, dtr, atr, usr;
+
+	sr = isl1208_i2c_get_sr(client);
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
+		return sr;
+	}
+
+	seq_printf(seq, "status_reg\t:%s%s%s%s%s%s (0x%.2x)\n",
+		   (sr & ISL1208_REG_SR_RTCF) ? " RTCF" : "",
+		   (sr & ISL1208_REG_SR_BAT) ? " BAT" : "",
+		   (sr & ISL1208_REG_SR_ALM) ? " ALM" : "",
+		   (sr & ISL1208_REG_SR_WRTC) ? " WRTC" : "",
+		   (sr & ISL1208_REG_SR_XTOSCB) ? " XTOSCB" : "",
+		   (sr & ISL1208_REG_SR_ARST) ? " ARST" : "",
+		   sr);
+
+	seq_printf(seq, "batt_status\t: %s\n",
+		   (sr & ISL1208_REG_SR_RTCF) ? "bad" : "okay");
+
+	dtr = isl1208_i2c_get_dtr(client);
+	if (dtr >= 0 -1)
+		seq_printf(seq, "digital_trim\t: %d ppm\n", dtr);
+
+	atr = isl1208_i2c_get_atr(client);
+	if (atr >= 0)
+		seq_printf(seq, "analog_trim\t: %d.%.2d pF\n",
+			   atr>>2, (atr&0x3)*25);
+
+	usr = isl1208_i2c_get_usr(client);
+	if (usr >= 0)
+		seq_printf(seq, "user_data\t: 0x%.4x\n", usr);
+
+	return 0;
+}
+
+
+static int isl1208_i2c_read_time(struct i2c_client *client,
+				 struct rtc_time *tm)
+{
+	int sr;
+	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
+
+	sr = isl1208_i2c_get_sr(client);
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
+		return -EIO;
+	}
+
+	sr = isl1208_i2c_read_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: reading RTC section failed\n",
+			__func__);
+		return sr;
+	}
+
+	tm->tm_sec = BCD2BIN(regs[ISL1208_REG_SC]);
+	tm->tm_min = BCD2BIN(regs[ISL1208_REG_MN]);
+	{ /* HR field has a more complex interpretation */
+		const u8 _hr = regs[ISL1208_REG_HR];
+		if (_hr & ISL1208_REG_HR_MIL) /* 24h format */
+			tm->tm_hour = BCD2BIN(_hr & 0x3f);
+		else { // 12h format
+			tm->tm_hour = BCD2BIN(_hr & 0x1f);
+			if (_hr & ISL1208_REG_HR_PM) /* PM flag set */
+				tm->tm_hour += 12;
+		}
+	}
+
+	tm->tm_mday = BCD2BIN(regs[ISL1208_REG_DT]);
+	tm->tm_mon = BCD2BIN(regs[ISL1208_REG_MO]) - 1; /* rtc starts at 1 */
+	tm->tm_year = BCD2BIN(regs[ISL1208_REG_YR]) + 100;
+	tm->tm_wday = BCD2BIN(regs[ISL1208_REG_DW]);
+
+	return 0;
+}
+
+static int isl1208_i2c_read_alarm(struct i2c_client *client,
+				  struct rtc_wkalrm *alarm)
+{
+	struct rtc_time *const tm = &alarm->time;
+	u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
+	int sr;
+
+	sr = isl1208_i2c_get_sr(client);
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
+		return sr;
+	}
+
+	sr = isl1208_i2c_read_regs(client, ISL1208_REG_SCA, regs,
+				  ISL1208_ALARM_SECTION_LEN);
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: reading alarm section failed\n",
+			__func__);
+		return sr;
+	}
+
+	/* MSB of each alarm register is an enable bit */
+	tm->tm_sec  = BCD2BIN(regs[ISL1208_REG_SCA-ISL1208_REG_SCA] & 0x7f);
+	tm->tm_min  = BCD2BIN(regs[ISL1208_REG_MNA-ISL1208_REG_SCA] & 0x7f);
+	tm->tm_hour = BCD2BIN(regs[ISL1208_REG_HRA-ISL1208_REG_SCA] & 0x3f);
+	tm->tm_mday = BCD2BIN(regs[ISL1208_REG_DTA-ISL1208_REG_SCA] & 0x3f);
+	tm->tm_mon  = BCD2BIN(regs[ISL1208_REG_MOA-ISL1208_REG_SCA] & 0x1f)-1;
+	tm->tm_wday = BCD2BIN(regs[ISL1208_REG_DWA-ISL1208_REG_SCA] & 0x03);
+
+	return 0;
+}
+
+static int isl1208_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	return isl1208_i2c_read_time(to_i2c_client(dev), tm);
+}
+
+static int isl1208_i2c_set_time(struct i2c_client *client,
+				struct rtc_time const *tm)
+{
+	int sr;
+	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
+
+	regs[ISL1208_REG_SC] = BIN2BCD(tm->tm_sec);
+	regs[ISL1208_REG_MN] = BIN2BCD(tm->tm_min);
+	regs[ISL1208_REG_HR] = BIN2BCD(tm->tm_hour) | ISL1208_REG_HR_MIL;
+
+	regs[ISL1208_REG_DT] = BIN2BCD(tm->tm_mday);
+	regs[ISL1208_REG_MO] = BIN2BCD(tm->tm_mon + 1);
+	regs[ISL1208_REG_YR] = BIN2BCD(tm->tm_year - 100);
+
+	regs[ISL1208_REG_DW] = BIN2BCD(tm->tm_wday & 7);
+
+	sr = isl1208_i2c_get_sr(client);
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: reading SR failed\n", __func__);
+		return sr;
+	}
+
+	/* set WRTC */
+	sr = i2c_smbus_write_byte_data (client, ISL1208_REG_SR,
+				       sr | ISL1208_REG_SR_WRTC);
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: writing SR failed\n", __func__);
+		return sr;
+	}
+
+	/* write RTC registers */
+	sr = isl1208_i2c_set_regs(client, 0, regs, ISL1208_RTC_SECTION_LEN);
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: writing RTC section failed\n",
+			__func__);
+		return sr;
+	}
+
+	/* clear WRTC again */
+	sr = i2c_smbus_write_byte_data (client, ISL1208_REG_SR,
+				       sr & ~ISL1208_REG_SR_WRTC);
+	if (sr < 0) {
+		dev_err(&client->dev, "%s: writing SR failed\n", __func__);
+		return sr;
+	}
+
+	return 0;
+}
+
+
+static int isl1208_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	return isl1208_i2c_set_time(to_i2c_client(dev), tm);
+}
+
+static int isl1208_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	return isl1208_i2c_read_alarm(to_i2c_client(dev), alarm);
+}
+
+static struct rtc_class_ops isl1208_rtc_ops = {
+	.proc		= isl1208_rtc_proc,
+	.read_time	= isl1208_rtc_read_time,
+	.set_time	= isl1208_rtc_set_time,
+	.read_alarm	= isl1208_rtc_read_alarm,
+	//.set_alarm	= isl1208_rtc_set_alarm,
+};
+
+/* sysfs interface */
+
+static ssize_t isl1208_sysfs_show_atrim(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	int atr;
+
+	atr = isl1208_i2c_get_atr(to_i2c_client(dev));
+	if (atr < 0)
+		return atr;
+
+	return sprintf(buf, "%d.%.2d pF\n", atr>>2, (atr&0x3)*25);
+}
+static DEVICE_ATTR(atrim, S_IRUGO, isl1208_sysfs_show_atrim, NULL);
+
+static ssize_t isl1208_sysfs_show_dtrim(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	int dtr;
+
+	dtr = isl1208_i2c_get_dtr(to_i2c_client(dev));
+	if (dtr < 0)
+		return dtr;
+
+	return sprintf(buf, "%d ppm\n", dtr);
+}
+static DEVICE_ATTR(dtrim, S_IRUGO, isl1208_sysfs_show_dtrim, NULL);
+
+static ssize_t isl1208_sysfs_show_usr(struct device *dev,
+				       struct device_attribute *attr,
+				       char *buf)
+{
+	int usr;
+
+	usr = isl1208_i2c_get_usr(to_i2c_client(dev));
+	if (usr < 0)
+		return usr;
+
+	return sprintf(buf, "0x%.4x\n", usr);
+}
+
+static ssize_t isl1208_sysfs_store_usr(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf, size_t count)
+{
+	int usr = -1;
+
+	if (buf[0] == '0' && (buf[1] == 'x' || buf[1] == 'X')) {
+		if (sscanf(buf, "%x", &usr) != 1)
+			return -EINVAL;
+	} else {
+		if (sscanf(buf, "%d", &usr) != 1)
+			return -EINVAL;
+	}
+
+	if (usr < 0 || usr > 0xffff)
+		return -EINVAL;
+
+	return isl1208_i2c_set_usr(to_i2c_client(dev), usr) ? -EIO : count;
+}
+static DEVICE_ATTR(usr, S_IRUGO | S_IWUSR, isl1208_sysfs_show_usr,
+		   isl1208_sysfs_store_usr);
+
+static int
+isl1208_probe(struct i2c_adapter *adapter, int addr, int kind)
+{
+	int rc = 0;
+	struct i2c_client *new_client = NULL;
+	struct rtc_device *rtc = NULL;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
+		rc = -ENODEV;
+		goto failout;
+	}
+
+	new_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
+	if (new_client == NULL) {
+		rc = -ENOMEM;
+		goto failout;
+	}
+
+	new_client->addr = addr;
+	new_client->adapter = adapter;
+	new_client->driver = &isl1208_driver;
+	new_client->flags = 0;
+	strcpy(new_client->name, DRV_NAME);
+
+	if (kind < 0) {
+		rc = isl1208_i2c_validate_client(new_client);
+		if (rc < 0)
+			goto failout;
+	}
+
+	rc = i2c_attach_client(new_client);
+	if (rc < 0)
+		goto failout;
+
+	dev_info(&new_client->dev,
+		 "chip found, driver version " DRV_VERSION "\n");
+
+	rtc = rtc_device_register(isl1208_driver.driver.name,
+				  &new_client->dev,
+				  &isl1208_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(rtc)) {
+		rc = PTR_ERR(rtc);
+		goto failout_detach;
+	}
+
+	i2c_set_clientdata(new_client, rtc);
+
+	rc = isl1208_i2c_get_sr(new_client);
+	if (rc < 0) {
+		dev_err(&new_client->dev, "reading status failed\n");
+		goto failout_unregister;
+	}
+
+	if (rc & ISL1208_REG_SR_RTCF)
+		dev_warn(&new_client->dev, "rtc power failure detected, "
+			 "please set clock.\n");
+
+	rc = device_create_file(&new_client->dev, &dev_attr_atrim);
+	if (rc < 0)
+		goto failout_unregister;
+	rc = device_create_file(&new_client->dev, &dev_attr_dtrim);
+	if (rc < 0)
+		goto failout_atrim;
+	rc = device_create_file(&new_client->dev, &dev_attr_usr);
+	if (rc < 0)
+		goto failout_dtrim;
+
+	return 0;
+
+ failout_dtrim:
+	device_remove_file(&new_client->dev, &dev_attr_dtrim);
+ failout_atrim:
+	device_remove_file(&new_client->dev, &dev_attr_atrim);
+ failout_unregister:
+	rtc_device_unregister(rtc);
+ failout_detach:
+	i2c_detach_client(new_client);
+ failout:
+	kfree(new_client);
+	return rc;
+}
+
+static int
+isl1208_attach_adapter (struct i2c_adapter *adapter)
+{
+	return i2c_probe(adapter, &addr_data, isl1208_probe);
+}
+
+static int
+isl1208_detach_client(struct i2c_client *client)
+{
+	int rc;
+	struct rtc_device *const rtc = i2c_get_clientdata(client);
+
+	if (rtc)
+		rtc_device_unregister(rtc); /* do we need to kfree? */
+
+	rc = i2c_detach_client(client);
+	if (rc)
+		return rc;
+
+	kfree(client);
+
+	return 0;
+}
+
+/* module management */
+
+static int __init isl1208_init(void)
+{
+	return i2c_add_driver(&isl1208_driver);
+}
+
+static void __exit isl1208_exit(void)
+{
+	i2c_del_driver(&isl1208_driver);
+}
+
+MODULE_AUTHOR("Herbert Valerio Riedel <hvr@gnu.org>");
+MODULE_DESCRIPTION("Intersil ISL1208 RTC driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+module_init(isl1208_init);
+module_exit(isl1208_exit);
diff -urN linux-2.6.18-rc1/drivers/rtc/rtc-vr41xx.c linux-2.6.18-rc2/drivers/rtc/rtc-vr41xx.c
--- linux-2.6.18-rc1/drivers/rtc/rtc-vr41xx.c	2006-07-15 22:34:42.785020027 +0000
+++ linux-2.6.18-rc2/drivers/rtc/rtc-vr41xx.c	2006-07-15 22:34:48.065593224 +0000
@@ -30,7 +30,7 @@
 #include <asm/div64.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
-#include <asm/vr41xx/vr41xx.h>
+#include <asm/vr41xx/irq.h>
 
 MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
 MODULE_DESCRIPTION("NEC VR4100 series RTC driver");
diff -urN linux-2.6.18-rc1/drivers/s390/block/dasd_devmap.c linux-2.6.18-rc2/drivers/s390/block/dasd_devmap.c
--- linux-2.6.18-rc1/drivers/s390/block/dasd_devmap.c	2006-07-15 22:34:42.789020461 +0000
+++ linux-2.6.18-rc2/drivers/s390/block/dasd_devmap.c	2006-07-15 22:34:48.065593224 +0000
@@ -394,7 +394,7 @@
 	if (!new)
 		return ERR_PTR(-ENOMEM);
 	spin_lock(&dasd_devmap_lock);
-	devmap = 0;
+	devmap = NULL;
 	hash = dasd_hash_busid(bus_id);
 	list_for_each_entry(tmp, &dasd_hashlists[hash], list)
 		if (strncmp(tmp->bus_id, bus_id, BUS_ID_SIZE) == 0) {
@@ -406,10 +406,10 @@
 		new->devindex = dasd_max_devindex++;
 		strncpy(new->bus_id, bus_id, BUS_ID_SIZE);
 		new->features = features;
-		new->device = 0;
+		new->device = NULL;
 		list_add(&new->list, &dasd_hashlists[hash]);
 		devmap = new;
-		new = 0;
+		new = NULL;
 	}
 	spin_unlock(&dasd_devmap_lock);
 	kfree(new);
@@ -479,7 +479,7 @@
 	int i;
 
 	spin_lock(&dasd_devmap_lock);
-	devmap = 0;
+	devmap = NULL;
 	for (i = 0; (i < 256) && !devmap; i++)
 		list_for_each_entry(tmp, &dasd_hashlists[i], list)
 			if (tmp->devindex == devindex) {
diff -urN linux-2.6.18-rc1/drivers/s390/block/dasd_eckd.c linux-2.6.18-rc2/drivers/s390/block/dasd_eckd.c
--- linux-2.6.18-rc1/drivers/s390/block/dasd_eckd.c	2006-07-15 22:34:42.793020896 +0000
+++ linux-2.6.18-rc2/drivers/s390/block/dasd_eckd.c	2006-07-15 22:34:48.069593658 +0000
@@ -65,16 +65,16 @@
 /* The ccw bus type uses this table to find devices that it sends to
  * dasd_eckd_probe */
 static struct ccw_device_id dasd_eckd_ids[] = {
-	{ CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3390, 0), driver_info: 0x1},
-	{ CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3390, 0), driver_info: 0x2},
-	{ CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3390, 0), driver_info: 0x3},
-	{ CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3380, 0), driver_info: 0x4},
-	{ CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3380, 0), driver_info: 0x5},
-	{ CCW_DEVICE_DEVTYPE (0x9343, 0, 0x9345, 0), driver_info: 0x6},
-	{ CCW_DEVICE_DEVTYPE (0x2107, 0, 0x3390, 0), driver_info: 0x7},
-	{ CCW_DEVICE_DEVTYPE (0x2107, 0, 0x3380, 0), driver_info: 0x8},
-	{ CCW_DEVICE_DEVTYPE (0x1750, 0, 0x3390, 0), driver_info: 0x9},
-	{ CCW_DEVICE_DEVTYPE (0x1750, 0, 0x3380, 0), driver_info: 0xa},
+	{ CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3390, 0), .driver_info = 0x1},
+	{ CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3390, 0), .driver_info = 0x2},
+	{ CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3390, 0), .driver_info = 0x3},
+	{ CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3380, 0), .driver_info = 0x4},
+	{ CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3380, 0), .driver_info = 0x5},
+	{ CCW_DEVICE_DEVTYPE (0x9343, 0, 0x9345, 0), .driver_info = 0x6},
+	{ CCW_DEVICE_DEVTYPE (0x2107, 0, 0x3390, 0), .driver_info = 0x7},
+	{ CCW_DEVICE_DEVTYPE (0x2107, 0, 0x3380, 0), .driver_info = 0x8},
+	{ CCW_DEVICE_DEVTYPE (0x1750, 0, 0x3390, 0), .driver_info = 0x9},
+	{ CCW_DEVICE_DEVTYPE (0x1750, 0, 0x3380, 0), .driver_info = 0xa},
 	{ /* end of list */ },
 };
 
diff -urN linux-2.6.18-rc1/drivers/s390/block/dasd_fba.c linux-2.6.18-rc2/drivers/s390/block/dasd_fba.c
--- linux-2.6.18-rc1/drivers/s390/block/dasd_fba.c	2006-07-15 22:34:42.793020896 +0000
+++ linux-2.6.18-rc2/drivers/s390/block/dasd_fba.c	2006-07-15 22:34:48.069593658 +0000
@@ -44,8 +44,8 @@
 };
 
 static struct ccw_device_id dasd_fba_ids[] = {
-	{ CCW_DEVICE_DEVTYPE (0x6310, 0, 0x9336, 0), driver_info: 0x1},
-	{ CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3370, 0), driver_info: 0x2},
+	{ CCW_DEVICE_DEVTYPE (0x6310, 0, 0x9336, 0), .driver_info = 0x1},
+	{ CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3370, 0), .driver_info = 0x2},
 	{ /* end of list */ },
 };
 
diff -urN linux-2.6.18-rc1/drivers/s390/block/dasd_genhd.c linux-2.6.18-rc2/drivers/s390/block/dasd_genhd.c
--- linux-2.6.18-rc1/drivers/s390/block/dasd_genhd.c	2006-07-15 22:34:42.793020896 +0000
+++ linux-2.6.18-rc2/drivers/s390/block/dasd_genhd.c	2006-07-15 22:34:48.069593658 +0000
@@ -84,9 +84,9 @@
 dasd_gendisk_free(struct dasd_device *device)
 {
 	del_gendisk(device->gdp);
-	device->gdp->queue = 0;
+	device->gdp->queue = NULL;
 	put_disk(device->gdp);
-	device->gdp = 0;
+	device->gdp = NULL;
 }
 
 /*
@@ -136,7 +136,7 @@
 	 * device->bdev to lower the offline open_count limit again.
 	 */
 	bdev = device->bdev;
-	device->bdev = 0;
+	device->bdev = NULL;
 
 	/*
 	 * See fs/partition/check.c:delete_partition
@@ -145,7 +145,7 @@
 	 */
 	memset(&bpart, 0, sizeof(struct blkpg_partition));
 	memset(&barg, 0, sizeof(struct blkpg_ioctl_arg));
-	barg.data = &bpart;
+	barg.data = (void __user *) &bpart;
 	barg.op = BLKPG_DEL_PARTITION;
 	for (bpart.pno = device->gdp->minors - 1; bpart.pno > 0; bpart.pno--)
 		ioctl_by_bdev(bdev, BLKPG, (unsigned long) &barg);
diff -urN linux-2.6.18-rc1/drivers/s390/block/dasd_ioctl.c linux-2.6.18-rc2/drivers/s390/block/dasd_ioctl.c
--- linux-2.6.18-rc1/drivers/s390/block/dasd_ioctl.c	2006-07-15 22:34:42.793020896 +0000
+++ linux-2.6.18-rc2/drivers/s390/block/dasd_ioctl.c	2006-07-15 22:34:48.069593658 +0000
@@ -345,7 +345,7 @@
 	if (bdev != bdev->bd_contains)
 		// ro setting is not allowed for partitions
 		return -EINVAL;
-	if (get_user(intval, (int *)argp))
+	if (get_user(intval, (int __user *)argp))
 		return -EFAULT;
 
 	set_disk_ro(bdev->bd_disk, intval);
diff -urN linux-2.6.18-rc1/drivers/s390/block/xpram.c linux-2.6.18-rc2/drivers/s390/block/xpram.c
--- linux-2.6.18-rc1/drivers/s390/block/xpram.c	2006-07-15 22:34:42.793020896 +0000
+++ linux-2.6.18-rc2/drivers/s390/block/xpram.c	2006-07-15 22:34:48.069593658 +0000
@@ -71,11 +71,11 @@
 /*
  * Parameter parsing functions.
  */
-static int devs = XPRAM_DEVS;
-static unsigned int sizes[XPRAM_MAX_DEVS];
+static int __initdata devs = XPRAM_DEVS;
+static char __initdata *sizes[XPRAM_MAX_DEVS];
 
 module_param(devs, int, 0);
-module_param_array(sizes, int, NULL, 0);
+module_param_array(sizes, charp, NULL, 0);
 
 MODULE_PARM_DESC(devs, "number of devices (\"partitions\"), " \
 		 "the default is " __MODULE_STRING(XPRAM_DEVS) "\n");
@@ -86,59 +86,6 @@
 		 "claimed by explicit sizes\n");
 MODULE_LICENSE("GPL");
 
-#ifndef MODULE
-/*
- * Parses the kernel parameters given in the kernel parameter line.
- * The expected format is
- *           <number_of_partitions>[","<partition_size>]*
- * where
- *           devices is a positive integer that initializes xpram_devs
- *           each size is a non-negative integer possibly followed by a
- *           magnitude (k,K,m,M,g,G), the list of sizes initialises
- *           xpram_sizes
- *
- * Arguments
- *           str: substring of kernel parameter line that contains xprams
- *                kernel parameters.
- *
- * Result    0 on success, -EINVAL else -- only for Version > 2.3
- *
- * Side effects
- *           the global variabls devs is set to the value of
- *           <number_of_partitions> and sizes[i] is set to the i-th
- *           partition size (if provided). A parsing error of a value
- *           results in this value being set to -EINVAL.
- */
-static int __init xpram_setup (char *str)
-{
-	char *cp;
-	int i;
-
-	devs = simple_strtoul(str, &cp, 10);
-	if (cp <= str || devs > XPRAM_MAX_DEVS)
-		return 0;
-	for (i = 0; (i < devs) && (*cp++ == ','); i++) {
-		sizes[i] = simple_strtoul(cp, &cp, 10);
-		if (*cp == 'g' || *cp == 'G') {
-			sizes[i] <<= 20;
-			cp++;
-		} else if (*cp == 'm' || *cp == 'M') {
-			sizes[i] <<= 10;
-			cp++;
-		} else if (*cp == 'k' || *cp == 'K')
-			cp++;
-		while (isspace(*cp)) cp++;
-	}
-	if (*cp == ',' && i >= devs)
-		PRINT_WARN("partition sizes list has too many entries.\n");
-	else if (*cp != 0)
-		PRINT_WARN("ignored '%s' at end of parameter string.\n", cp);
-	return 1;
-}
-
-__setup("xpram_parts=", xpram_setup);
-#endif
-
 /*
  * Copy expanded memory page (4kB) into main memory                  
  * Arguments                                                         
@@ -374,7 +321,9 @@
 	mem_needed = 0;
 	mem_auto_no = 0;
 	for (i = 0; i < xpram_devs; i++) {
-		xpram_sizes[i] = (sizes[i] + 3) & -4UL;
+		if (sizes[i])
+			xpram_sizes[i] =
+				(memparse(sizes[i], &sizes[i]) + 3) & -4UL;
 		if (xpram_sizes[i])
 			mem_needed += xpram_sizes[i];
 		else
diff -urN linux-2.6.18-rc1/drivers/s390/char/con3215.c linux-2.6.18-rc2/drivers/s390/char/con3215.c
--- linux-2.6.18-rc1/drivers/s390/char/con3215.c	2006-07-15 22:34:42.793020896 +0000
+++ linux-2.6.18-rc2/drivers/s390/char/con3215.c	2006-07-15 22:34:48.073594092 +0000
@@ -693,7 +693,7 @@
 				       GFP_KERNEL|GFP_DMA);
 	if (raw->buffer == NULL) {
 		spin_lock(&raw3215_device_lock);
-		raw3215[line] = 0;
+		raw3215[line] = NULL;
 		spin_unlock(&raw3215_device_lock);
 		kfree(raw);
 		return -ENOMEM;
diff -urN linux-2.6.18-rc1/drivers/s390/char/ctrlchar.c linux-2.6.18-rc2/drivers/s390/char/ctrlchar.c
--- linux-2.6.18-rc1/drivers/s390/char/ctrlchar.c	2006-07-15 22:34:42.793020896 +0000
+++ linux-2.6.18-rc2/drivers/s390/char/ctrlchar.c	2006-07-15 22:34:48.073594092 +0000
@@ -23,7 +23,7 @@
 	handle_sysrq(ctrlchar_sysrq_key, NULL, (struct tty_struct *) tty);
 }
 
-static DECLARE_WORK(ctrlchar_work, ctrlchar_handle_sysrq, 0);
+static DECLARE_WORK(ctrlchar_work, ctrlchar_handle_sysrq, NULL);
 #endif
 
 
diff -urN linux-2.6.18-rc1/drivers/s390/char/defkeymap.c linux-2.6.18-rc2/drivers/s390/char/defkeymap.c
--- linux-2.6.18-rc1/drivers/s390/char/defkeymap.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/s390/char/defkeymap.c	2006-07-15 22:34:48.073594092 +0000
@@ -83,8 +83,8 @@
 };
 
 ushort *key_maps[MAX_NR_KEYMAPS] = {
-	plain_map, shift_map, 0, 0,
-	ctrl_map, shift_ctrl_map,	0
+	plain_map, shift_map, NULL, NULL,
+	ctrl_map, shift_ctrl_map, NULL,
 };
 
 unsigned int keymap_count = 4;
@@ -145,7 +145,7 @@
 	func_buf + 97,
 	func_buf + 103,
 	func_buf + 109,
-	0,
+	NULL,
 };
 
 struct kbdiacr accent_table[MAX_DIACR] = {
diff -urN linux-2.6.18-rc1/drivers/s390/char/fs3270.c linux-2.6.18-rc2/drivers/s390/char/fs3270.c
--- linux-2.6.18-rc1/drivers/s390/char/fs3270.c	2006-07-15 22:34:42.793020896 +0000
+++ linux-2.6.18-rc2/drivers/s390/char/fs3270.c	2006-07-15 22:34:48.073594092 +0000
@@ -236,7 +236,7 @@
  * Process reads from fullscreen 3270.
  */
 static ssize_t
-fs3270_read(struct file *filp, char *data, size_t count, loff_t *off)
+fs3270_read(struct file *filp, char __user *data, size_t count, loff_t *off)
 {
 	struct fs3270 *fp;
 	struct raw3270_request *rq;
@@ -281,7 +281,7 @@
  * Process writes to fullscreen 3270.
  */
 static ssize_t
-fs3270_write(struct file *filp, const char *data, size_t count, loff_t *off)
+fs3270_write(struct file *filp, const char __user *data, size_t count, loff_t *off)
 {
 	struct fs3270 *fp;
 	struct raw3270_request *rq;
@@ -338,10 +338,10 @@
 		fp->write_command = arg;
 		break;
 	case TUBGETI:
-		rc = put_user(fp->read_command, (char *) arg);
+		rc = put_user(fp->read_command, (char __user *) arg);
 		break;
 	case TUBGETO:
-		rc = put_user(fp->write_command,(char *) arg);
+		rc = put_user(fp->write_command,(char __user *) arg);
 		break;
 	case TUBGETMOD:
 		iocb.model = fp->view.model;
@@ -350,7 +350,7 @@
 		iocb.pf_cnt = 24;
 		iocb.re_cnt = 20;
 		iocb.map = 0;
-		if (copy_to_user((char *) arg, &iocb,
+		if (copy_to_user((char __user *) arg, &iocb,
 				 sizeof(struct raw3270_iocb)))
 			rc = -EFAULT;
 		break;
@@ -479,7 +479,7 @@
 	struct fs3270 *fp;
 
 	fp = filp->private_data;
-	filp->private_data = 0;
+	filp->private_data = NULL;
 	if (fp) {
 		fp->fs_pid = 0;
 		raw3270_reset(&fp->view);
diff -urN linux-2.6.18-rc1/drivers/s390/char/keyboard.c linux-2.6.18-rc2/drivers/s390/char/keyboard.c
--- linux-2.6.18-rc1/drivers/s390/char/keyboard.c	2006-07-15 22:34:42.793020896 +0000
+++ linux-2.6.18-rc2/drivers/s390/char/keyboard.c	2006-07-15 22:34:48.073594092 +0000
@@ -103,7 +103,7 @@
 out_kbd:
 	kfree(kbd);
 out:
-	return 0;
+	return NULL;
 }
 
 void
@@ -304,7 +304,7 @@
 		if (kbd->sysrq) {
 			if (kbd->sysrq == K(KT_LATIN, '-')) {
 				kbd->sysrq = 0;
-				handle_sysrq(value, 0, kbd->tty);
+				handle_sysrq(value, NULL, kbd->tty);
 				return;
 			}
 			if (value == '-') {
@@ -363,7 +363,7 @@
 			/* disallocate map */
 			key_map = kbd->key_maps[tmp.kb_table];
 			if (key_map) {
-			    kbd->key_maps[tmp.kb_table] = 0;
+			    kbd->key_maps[tmp.kb_table] = NULL;
 			    kfree(key_map);
 			}
 			break;
diff -urN linux-2.6.18-rc1/drivers/s390/char/raw3270.c linux-2.6.18-rc2/drivers/s390/char/raw3270.c
--- linux-2.6.18-rc1/drivers/s390/char/raw3270.c	2006-07-15 22:34:42.797021330 +0000
+++ linux-2.6.18-rc2/drivers/s390/char/raw3270.c	2006-07-15 22:34:48.073594092 +0000
@@ -555,7 +555,7 @@
 #ifdef CONFIG_TN3270_CONSOLE
 	if (raw3270_registered == 0) {
 		spin_lock_irqsave(get_ccwdev_lock(view->dev->cdev), flags);
-		rq->callback = 0;
+		rq->callback = NULL;
 		rc = __raw3270_start(rp, view, rq);
 		if (rc == 0)
 			while (!raw3270_request_final(rq)) {
@@ -719,8 +719,8 @@
 		rc = __raw3270_size_device_vm(rp);
 	else
 		rc = __raw3270_size_device(rp);
-	raw3270_init_view.dev = 0;
-	rp->view = 0;
+	raw3270_init_view.dev = NULL;
+	rp->view = NULL;
 	up(&raw3270_init_sem);
 	if (rc == 0) {	/* Found something. */
 		/* Try to find a model. */
@@ -761,8 +761,8 @@
 	rp->view = &raw3270_init_view;
 	raw3270_init_view.dev = rp;
 	rc = raw3270_start_init(rp, &raw3270_init_view, &rp->init_request);
-	raw3270_init_view.dev = 0;
-	rp->view = 0;
+	raw3270_init_view.dev = NULL;
+	rp->view = NULL;
 	up(&raw3270_init_sem);
 	return rc;
 }
@@ -934,7 +934,7 @@
 	else if (!test_bit(RAW3270_FLAGS_READY, &rp->flags))
 		rc = -ENODEV;
 	else {
-		oldview = 0;
+		oldview = NULL;
 		if (rp->view) {
 			oldview = rp->view;
 			oldview->fn->deactivate(oldview);
@@ -951,7 +951,7 @@
 						rp->view = nv;
 						if (nv->fn->activate(nv) == 0)
 							break;
-						rp->view = 0;
+						rp->view = NULL;
 					}
 			}
 		}
@@ -975,7 +975,7 @@
 	spin_lock_irqsave(get_ccwdev_lock(rp->cdev), flags);
 	if (rp->view == view) {
 		view->fn->deactivate(view);
-		rp->view = 0;
+		rp->view = NULL;
 		/* Move deactivated view to end of list. */
 		list_del_init(&view->list);
 		list_add_tail(&view->list, &rp->view_list);
@@ -985,7 +985,7 @@
 				rp->view = view;
 				if (view->fn->activate(view) == 0)
 					break;
-				rp->view = 0;
+				rp->view = NULL;
 			}
 		}
 	}
@@ -1076,7 +1076,7 @@
 	spin_lock_irqsave(get_ccwdev_lock(rp->cdev), flags);
 	if (rp->view == view) {
 		view->fn->deactivate(view);
-		rp->view = 0;
+		rp->view = NULL;
 	}
 	list_del_init(&view->list);
 	if (!rp->view && test_bit(RAW3270_FLAGS_READY, &rp->flags)) {
@@ -1117,9 +1117,9 @@
 
 	/* Disconnect from ccw_device. */
 	cdev = rp->cdev;
-	rp->cdev = 0;
-	cdev->dev.driver_data = 0;
-	cdev->handler = 0;
+	rp->cdev = NULL;
+	cdev->dev.driver_data = NULL;
+	cdev->handler = NULL;
 
 	/* Put ccw_device structure. */
 	put_device(&cdev->dev);
@@ -1144,7 +1144,7 @@
 	return snprintf(buf, PAGE_SIZE, "%i\n",
 			((struct raw3270 *) dev->driver_data)->model);
 }
-static DEVICE_ATTR(model, 0444, raw3270_model_show, 0);
+static DEVICE_ATTR(model, 0444, raw3270_model_show, NULL);
 
 static ssize_t
 raw3270_rows_show(struct device *dev, struct device_attribute *attr, char *buf)
@@ -1152,7 +1152,7 @@
 	return snprintf(buf, PAGE_SIZE, "%i\n",
 			((struct raw3270 *) dev->driver_data)->rows);
 }
-static DEVICE_ATTR(rows, 0444, raw3270_rows_show, 0);
+static DEVICE_ATTR(rows, 0444, raw3270_rows_show, NULL);
 
 static ssize_t
 raw3270_columns_show(struct device *dev, struct device_attribute *attr, char *buf)
@@ -1160,7 +1160,7 @@
 	return snprintf(buf, PAGE_SIZE, "%i\n",
 			((struct raw3270 *) dev->driver_data)->cols);
 }
-static DEVICE_ATTR(columns, 0444, raw3270_columns_show, 0);
+static DEVICE_ATTR(columns, 0444, raw3270_columns_show, NULL);
 
 static struct attribute * raw3270_attrs[] = {
 	&dev_attr_model.attr,
@@ -1296,7 +1296,7 @@
 	spin_lock_irqsave(get_ccwdev_lock(cdev), flags);
 	if (rp->view) {
 		rp->view->fn->deactivate(rp->view);
-		rp->view = 0;
+		rp->view = NULL;
 	}
 	while (!list_empty(&rp->view_list)) {
 		v = list_entry(rp->view_list.next, struct raw3270_view, list);
diff -urN linux-2.6.18-rc1/drivers/s390/char/raw3270.h linux-2.6.18-rc2/drivers/s390/char/raw3270.h
--- linux-2.6.18-rc1/drivers/s390/char/raw3270.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/s390/char/raw3270.h	2006-07-15 22:34:48.073594092 +0000
@@ -231,7 +231,7 @@
 		INIT_LIST_HEAD(&cs->update);
 		return cs;
 	}
-	return 0;
+	return NULL;
 }
 
 static inline unsigned long
diff -urN linux-2.6.18-rc1/drivers/s390/char/tape_34xx.c linux-2.6.18-rc2/drivers/s390/char/tape_34xx.c
--- linux-2.6.18-rc1/drivers/s390/char/tape_34xx.c	2006-07-15 22:34:42.797021330 +0000
+++ linux-2.6.18-rc2/drivers/s390/char/tape_34xx.c	2006-07-15 22:34:48.077594526 +0000
@@ -1309,9 +1309,9 @@
 };
 
 static struct ccw_device_id tape_34xx_ids[] = {
-	{ CCW_DEVICE_DEVTYPE(0x3480, 0, 0x3480, 0), driver_info: tape_3480},
-	{ CCW_DEVICE_DEVTYPE(0x3490, 0, 0x3490, 0), driver_info: tape_3490},
-	{ /* end of list */ }
+	{ CCW_DEVICE_DEVTYPE(0x3480, 0, 0x3480, 0), .driver_info = tape_3480},
+	{ CCW_DEVICE_DEVTYPE(0x3490, 0, 0x3490, 0), .driver_info = tape_3490},
+	{ /* end of list */ },
 };
 
 static int
diff -urN linux-2.6.18-rc1/drivers/s390/char/tty3270.c linux-2.6.18-rc2/drivers/s390/char/tty3270.c
--- linux-2.6.18-rc1/drivers/s390/char/tty3270.c	2006-07-15 22:34:42.801021764 +0000
+++ linux-2.6.18-rc2/drivers/s390/char/tty3270.c	2006-07-15 22:34:48.077594526 +0000
@@ -437,7 +437,7 @@
 {
 	struct string *s;
 
-	tp->rcl_walk = 0;
+	tp->rcl_walk = NULL;
 	if (len <= 0)
 		return;
 	if (tp->rcl_nr >= tp->rcl_max) {
@@ -466,12 +466,12 @@
 		else if (!list_empty(&tp->rcl_lines))
 			tp->rcl_walk = tp->rcl_lines.prev;
 		s = tp->rcl_walk ? 
-			list_entry(tp->rcl_walk, struct string, list) : 0;
+			list_entry(tp->rcl_walk, struct string, list) : NULL;
 		if (tp->rcl_walk) {
 			s = list_entry(tp->rcl_walk, struct string, list);
 			tty3270_update_prompt(tp, s->string, s->len);
 		} else
-			tty3270_update_prompt(tp, 0, 0);
+			tty3270_update_prompt(tp, NULL, 0);
 		tty3270_set_timer(tp, 1);
 	}
 	spin_unlock_bh(&tp->view.lock);
@@ -553,7 +553,7 @@
 	 * has to be emitted to the tty and for 0x6d the screen
 	 * needs to be redrawn.
 	 */
-	input = 0;
+	input = NULL;
 	len = 0;
 	if (tp->input->string[0] == 0x7d) {
 		/* Enter: write input to tty. */
@@ -567,7 +567,7 @@
 			tty3270_update_status(tp);
 		}
 		/* Clear input area. */
-		tty3270_update_prompt(tp, 0, 0);
+		tty3270_update_prompt(tp, NULL, 0);
 		tty3270_set_timer(tp, 1);
 	} else if (tp->input->string[0] == 0x6d) {
 		/* Display has been cleared. Redraw. */
@@ -808,8 +808,8 @@
 	tp = (struct tty3270 *) view;
 	tty = tp->tty;
 	if (tty) {
-		tty->driver_data = 0;
-		tp->tty = tp->kbd->tty = 0;
+		tty->driver_data = NULL;
+		tp->tty = tp->kbd->tty = NULL;
 		tty_hangup(tty);
 		raw3270_put_view(&tp->view);
 	}
@@ -948,8 +948,8 @@
 		return;
 	tp = (struct tty3270 *) tty->driver_data;
 	if (tp) {
-		tty->driver_data = 0;
-		tp->tty = tp->kbd->tty = 0;
+		tty->driver_data = NULL;
+		tp->tty = tp->kbd->tty = NULL;
 		raw3270_put_view(&tp->view);
 	}
 }
@@ -1673,7 +1673,7 @@
 		new = L_ECHO(tty) ? TF_INPUT: TF_INPUTN;
 		if (new != tp->inattr) {
 			tp->inattr = new;
-			tty3270_update_prompt(tp, 0, 0);
+			tty3270_update_prompt(tp, NULL, 0);
 			tty3270_set_timer(tp, 1);
 		}
 	}
@@ -1759,7 +1759,7 @@
 tty3270_notifier(int index, int active)
 {
 	if (active)
-		tty_register_device(tty3270_driver, index, 0);
+		tty_register_device(tty3270_driver, index, NULL);
 	else
 		tty_unregister_device(tty3270_driver, index);
 }
@@ -1818,7 +1818,7 @@
 
 	raw3270_unregister_notifier(tty3270_notifier);
 	driver = tty3270_driver;
-	tty3270_driver = 0;
+	tty3270_driver = NULL;
 	tty_unregister_driver(driver);
 	tty3270_del_views();
 }
diff -urN linux-2.6.18-rc1/drivers/s390/char/vmlogrdr.c linux-2.6.18-rc2/drivers/s390/char/vmlogrdr.c
--- linux-2.6.18-rc1/drivers/s390/char/vmlogrdr.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/s390/char/vmlogrdr.c	2006-07-15 22:34:48.077594526 +0000
@@ -86,8 +86,8 @@
  */
 static int vmlogrdr_open(struct inode *, struct file *);
 static int vmlogrdr_release(struct inode *, struct file *);
-static ssize_t vmlogrdr_read (struct file *filp, char *data, size_t count,
-			       loff_t * ppos);
+static ssize_t vmlogrdr_read (struct file *filp, char __user *data,
+			      size_t count, loff_t * ppos);
 
 static struct file_operations vmlogrdr_fops = {
 	.owner   = THIS_MODULE,
@@ -515,7 +515,7 @@
 
 
 static ssize_t
-vmlogrdr_read (struct file *filp, char *data, size_t count, loff_t * ppos)
+vmlogrdr_read(struct file *filp, char __user *data, size_t count, loff_t * ppos)
 {
 	int rc;
 	struct vmlogrdr_priv_t * priv = filp->private_data;
diff -urN linux-2.6.18-rc1/drivers/s390/char/vmwatchdog.c linux-2.6.18-rc2/drivers/s390/char/vmwatchdog.c
--- linux-2.6.18-rc1/drivers/s390/char/vmwatchdog.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/s390/char/vmwatchdog.c	2006-07-15 22:34:48.077594526 +0000
@@ -193,7 +193,7 @@
 		return 0;
 	case WDIOC_GETSTATUS:
 	case WDIOC_GETBOOTSTATUS:
-		return put_user(0, (int *)arg);
+		return put_user(0, (int __user *)arg);
 	case WDIOC_GETTEMP:
 		return -EINVAL;
 	case WDIOC_SETOPTIONS:
diff -urN linux-2.6.18-rc1/drivers/s390/cio/ccwgroup.c linux-2.6.18-rc2/drivers/s390/cio/ccwgroup.c
--- linux-2.6.18-rc1/drivers/s390/cio/ccwgroup.c	2006-07-15 22:34:42.801021764 +0000
+++ linux-2.6.18-rc2/drivers/s390/cio/ccwgroup.c	2006-07-15 22:34:48.081594961 +0000
@@ -319,7 +319,7 @@
 	if (!try_module_get(gdrv->owner))
 		return -EINVAL;
 
-	value = simple_strtoul(buf, 0, 0);
+	value = simple_strtoul(buf, NULL, 0);
 	ret = count;
 	if (value == 1)
 		ccwgroup_set_online(gdev);
diff -urN linux-2.6.18-rc1/drivers/s390/cio/chsc.c linux-2.6.18-rc2/drivers/s390/cio/chsc.c
--- linux-2.6.18-rc1/drivers/s390/cio/chsc.c	2006-07-15 22:34:42.801021764 +0000
+++ linux-2.6.18-rc2/drivers/s390/cio/chsc.c	2006-07-15 22:34:48.081594961 +0000
@@ -1464,6 +1464,40 @@
 	return desc;
 }
 
+static int reset_channel_path(struct channel_path *chp)
+{
+	int cc;
+
+	cc = rchp(chp->id);
+	switch (cc) {
+	case 0:
+		return 0;
+	case 2:
+		return -EBUSY;
+	default:
+		return -ENODEV;
+	}
+}
+
+static void reset_channel_paths_css(struct channel_subsystem *css)
+{
+	int i;
+
+	for (i = 0; i <= __MAX_CHPID; i++) {
+		if (css->chps[i])
+			reset_channel_path(css->chps[i]);
+	}
+}
+
+void cio_reset_channel_paths(void)
+{
+	int i;
+
+	for (i = 0; i <= __MAX_CSSID; i++) {
+		if (css[i] && css[i]->valid)
+			reset_channel_paths_css(css[i]);
+	}
+}
 
 static int __init
 chsc_alloc_sei_area(void)
diff -urN linux-2.6.18-rc1/drivers/s390/cio/cio.c linux-2.6.18-rc2/drivers/s390/cio/cio.c
--- linux-2.6.18-rc1/drivers/s390/cio/cio.c	2006-07-15 22:34:42.801021764 +0000
+++ linux-2.6.18-rc2/drivers/s390/cio/cio.c	2006-07-15 22:34:48.081594961 +0000
@@ -519,6 +519,7 @@
 	memset(sch, 0, sizeof(struct subchannel));
 
 	spin_lock_init(&sch->lock);
+	mutex_init(&sch->reg_mutex);
 
 	/* Set a name for the subchannel */
 	snprintf (sch->dev.bus_id, BUS_ID_SIZE, "0.%x.%04x", schid.ssid,
@@ -797,7 +798,7 @@
 cio_get_console_subchannel(void)
 {
 	if (!console_subchannel_in_use)
-		return 0;
+		return NULL;
 	return &console_subchannel;
 }
 
@@ -875,5 +876,6 @@
 reipl(unsigned long devno)
 {
 	clear_all_subchannels();
+	cio_reset_channel_paths();
 	do_reipl(devno);
 }
diff -urN linux-2.6.18-rc1/drivers/s390/cio/cio.h linux-2.6.18-rc2/drivers/s390/cio/cio.h
--- linux-2.6.18-rc1/drivers/s390/cio/cio.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/s390/cio/cio.h	2006-07-15 22:34:48.081594961 +0000
@@ -2,6 +2,7 @@
 #define S390_CIO_H
 
 #include "schid.h"
+#include <linux/mutex.h>
 
 /*
  * where we put the ssd info
@@ -87,7 +88,7 @@
 struct subchannel {
 	struct subchannel_id schid;
 	spinlock_t lock;	/* subchannel lock */
-
+	struct mutex reg_mutex;
 	enum {
 		SUBCHANNEL_TYPE_IO = 0,
 		SUBCHANNEL_TYPE_CHSC = 1,
diff -urN linux-2.6.18-rc1/drivers/s390/cio/cmf.c linux-2.6.18-rc2/drivers/s390/cio/cmf.c
--- linux-2.6.18-rc1/drivers/s390/cio/cmf.c	2006-07-15 22:34:42.801021764 +0000
+++ linux-2.6.18-rc2/drivers/s390/cio/cmf.c	2006-07-15 22:34:48.081594961 +0000
@@ -1140,7 +1140,7 @@
 	&dev_attr_avg_device_disconnect_time.attr,
 	&dev_attr_avg_control_unit_queuing_time.attr,
 	&dev_attr_avg_device_active_only_time.attr,
-	0,
+	NULL,
 };
 
 static struct attribute_group cmf_attr_group = {
@@ -1160,7 +1160,7 @@
 	&dev_attr_avg_device_active_only_time.attr,
 	&dev_attr_avg_device_busy_time.attr,
 	&dev_attr_avg_initial_command_response_time.attr,
-	0,
+	NULL,
 };
 
 static struct attribute_group cmf_attr_group_ext = {
diff -urN linux-2.6.18-rc1/drivers/s390/cio/css.c linux-2.6.18-rc2/drivers/s390/cio/css.c
--- linux-2.6.18-rc1/drivers/s390/cio/css.c	2006-07-15 22:34:42.805022198 +0000
+++ linux-2.6.18-rc2/drivers/s390/cio/css.c	2006-07-15 22:34:48.081594961 +0000
@@ -108,6 +108,24 @@
 
 extern int css_get_ssd_info(struct subchannel *sch);
 
+
+int css_sch_device_register(struct subchannel *sch)
+{
+	int ret;
+
+	mutex_lock(&sch->reg_mutex);
+	ret = device_register(&sch->dev);
+	mutex_unlock(&sch->reg_mutex);
+	return ret;
+}
+
+void css_sch_device_unregister(struct subchannel *sch)
+{
+	mutex_lock(&sch->reg_mutex);
+	device_unregister(&sch->dev);
+	mutex_unlock(&sch->reg_mutex);
+}
+
 static int
 css_register_subchannel(struct subchannel *sch)
 {
@@ -119,7 +137,7 @@
 	sch->dev.release = &css_subchannel_release;
 	
 	/* make it known to the system */
-	ret = device_register(&sch->dev);
+	ret = css_sch_device_register(sch);
 	if (ret)
 		printk (KERN_WARNING "%s: could not register %s\n",
 			__func__, sch->dev.bus_id);
@@ -250,7 +268,7 @@
 		 * The device will be killed automatically.
 		 */
 		cio_disable_subchannel(sch);
-		device_unregister(&sch->dev);
+		css_sch_device_unregister(sch);
 		/* Reset intparm to zeroes. */
 		sch->schib.pmcw.intparm = 0;
 		cio_modify(sch);
@@ -264,7 +282,7 @@
 		 * away in any case.
 		 */
 		if (!disc) {
-			device_unregister(&sch->dev);
+			css_sch_device_unregister(sch);
 			/* Reset intparm to zeroes. */
 			sch->schib.pmcw.intparm = 0;
 			cio_modify(sch);
@@ -605,9 +623,13 @@
 		ret = device_register(&css[i]->device);
 		if (ret)
 			goto out_free;
-		if (css_characteristics_avail && css_chsc_characteristics.secm)
-			device_create_file(&css[i]->device,
-					   &dev_attr_cm_enable);
+		if (css_characteristics_avail &&
+		    css_chsc_characteristics.secm) {
+			ret = device_create_file(&css[i]->device,
+						 &dev_attr_cm_enable);
+			if (ret)
+				goto out_device;
+		}
 	}
 	css_init_done = 1;
 
@@ -615,6 +637,8 @@
 
 	for_each_subchannel(__init_channel_subsystem, NULL);
 	return 0;
+out_device:
+	device_unregister(&css[i]->device);
 out_free:
 	kfree(css[i]);
 out_unregister:
diff -urN linux-2.6.18-rc1/drivers/s390/cio/css.h linux-2.6.18-rc2/drivers/s390/cio/css.h
--- linux-2.6.18-rc1/drivers/s390/cio/css.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/s390/cio/css.h	2006-07-15 22:34:48.081594961 +0000
@@ -100,7 +100,7 @@
 	struct qdio_irq *qdio_data;
 	struct irb irb;		/* device status */
 	struct senseid senseid;	/* SenseID info */
-	struct pgid pgid;	/* path group ID */
+	struct pgid pgid[8];	/* path group IDs per chpid*/
 	struct ccw1 iccws[2];	/* ccws for SNID/SID/SPGID commands */
 	struct work_struct kick_work;
 	wait_queue_head_t wait_q;
@@ -136,6 +136,8 @@
 extern struct css_driver io_subchannel_driver;
 
 extern int css_probe_device(struct subchannel_id);
+extern int css_sch_device_register(struct subchannel *);
+extern void css_sch_device_unregister(struct subchannel *);
 extern struct subchannel * get_subchannel_by_schid(struct subchannel_id);
 extern int css_init_done;
 extern int for_each_subchannel(int(*fn)(struct subchannel_id, void *), void *);
diff -urN linux-2.6.18-rc1/drivers/s390/cio/device.c linux-2.6.18-rc2/drivers/s390/cio/device.c
--- linux-2.6.18-rc1/drivers/s390/cio/device.c	2006-07-15 22:34:42.805022198 +0000
+++ linux-2.6.18-rc2/drivers/s390/cio/device.c	2006-07-15 22:34:48.081594961 +0000
@@ -100,7 +100,7 @@
 	if ((buffer_size - length <= 0) || (i >= num_envp))
 		return -ENOMEM;
 
-	envp[i] = 0;
+	envp[i] = NULL;
 
 	return 0;
 }
@@ -280,7 +280,7 @@
 	 * 'throw away device'.
 	 */
 	sch = to_subchannel(cdev->dev.parent);
-	device_unregister(&sch->dev);
+	css_sch_device_unregister(sch);
 	/* Reset intparm to zeroes. */
 	sch->schib.pmcw.intparm = 0;
 	cio_modify(sch);
@@ -625,7 +625,7 @@
 					other_sch->schib.pmcw.intparm = 0;
 					cio_modify(other_sch);
 				}
-				device_unregister(&other_sch->dev);
+				css_sch_device_unregister(other_sch);
 			}
 		}
 		/* Update ssd info here. */
@@ -709,7 +709,7 @@
 	struct subchannel *sch;
 
 	sch = to_subchannel(cdev->dev.parent);
-	device_unregister(&sch->dev);
+	css_sch_device_unregister(sch);
 	/* Reset intparm to zeroes. */
 	sch->schib.pmcw.intparm = 0;
 	cio_modify(sch);
@@ -1057,7 +1057,7 @@
 				 __ccwdev_check_busid);
 	put_driver(drv);
 
-	return dev ? to_ccwdev(dev) : 0;
+	return dev ? to_ccwdev(dev) : NULL;
 }
 
 /************************** device driver handling ************************/
@@ -1082,7 +1082,7 @@
 	ret = cdrv->probe ? cdrv->probe(cdev) : -ENODEV;
 
 	if (ret) {
-		cdev->drv = 0;
+		cdev->drv = NULL;
 		return ret;
 	}
 
@@ -1113,7 +1113,7 @@
 				 ret, cdev->dev.bus_id);
 	}
 	ccw_device_set_timeout(cdev, 0);
-	cdev->drv = 0;
+	cdev->drv = NULL;
 	return 0;
 }
 
diff -urN linux-2.6.18-rc1/drivers/s390/cio/device_fsm.c linux-2.6.18-rc2/drivers/s390/cio/device_fsm.c
--- linux-2.6.18-rc1/drivers/s390/cio/device_fsm.c	2006-07-15 22:34:42.805022198 +0000
+++ linux-2.6.18-rc2/drivers/s390/cio/device_fsm.c	2006-07-15 22:34:48.085595395 +0000
@@ -378,6 +378,56 @@
 		put_device (&cdev->dev);
 }
 
+static inline int cmp_pgid(struct pgid *p1, struct pgid *p2)
+{
+	char *c1;
+	char *c2;
+
+	c1 = (char *)p1;
+	c2 = (char *)p2;
+
+	return memcmp(c1 + 1, c2 + 1, sizeof(struct pgid) - 1);
+}
+
+static void __ccw_device_get_common_pgid(struct ccw_device *cdev)
+{
+	int i;
+	int last;
+
+	last = 0;
+	for (i = 0; i < 8; i++) {
+		if (cdev->private->pgid[i].inf.ps.state1 == SNID_STATE1_RESET)
+			/* No PGID yet */
+			continue;
+		if (cdev->private->pgid[last].inf.ps.state1 ==
+		    SNID_STATE1_RESET) {
+			/* First non-zero PGID */
+			last = i;
+			continue;
+		}
+		if (cmp_pgid(&cdev->private->pgid[i],
+			     &cdev->private->pgid[last]) == 0)
+			/* Non-conflicting PGIDs */
+			continue;
+
+		/* PGID mismatch, can't pathgroup. */
+		CIO_MSG_EVENT(0, "SNID - pgid mismatch for device "
+			      "0.%x.%04x, can't pathgroup\n",
+			      cdev->private->ssid, cdev->private->devno);
+		cdev->private->options.pgroup = 0;
+		return;
+	}
+	if (cdev->private->pgid[last].inf.ps.state1 ==
+	    SNID_STATE1_RESET)
+		/* No previous pgid found */
+		memcpy(&cdev->private->pgid[0], &css[0]->global_pgid,
+		       sizeof(struct pgid));
+	else
+		/* Use existing pgid */
+		memcpy(&cdev->private->pgid[0], &cdev->private->pgid[last],
+		       sizeof(struct pgid));
+}
+
 /*
  * Function called from device_pgid.c after sense path ground has completed.
  */
@@ -388,24 +438,26 @@
 
 	sch = to_subchannel(cdev->dev.parent);
 	switch (err) {
-	case 0:
-		/* Start Path Group verification. */
-		sch->vpm = 0;	/* Start with no path groups set. */
-		cdev->private->state = DEV_STATE_VERIFY;
-		ccw_device_verify_start(cdev);
+	case -EOPNOTSUPP: /* path grouping not supported, use nop instead. */
+		cdev->private->options.pgroup = 0;
+		break;
+	case 0: /* success */
+	case -EACCES: /* partial success, some paths not operational */
+		/* Check if all pgids are equal or 0. */
+		__ccw_device_get_common_pgid(cdev);
 		break;
 	case -ETIME:		/* Sense path group id stopped by timeout. */
 	case -EUSERS:		/* device is reserved for someone else. */
 		ccw_device_done(cdev, DEV_STATE_BOXED);
-		break;
-	case -EOPNOTSUPP: /* path grouping not supported, just set online. */
-		cdev->private->options.pgroup = 0;
-		ccw_device_done(cdev, DEV_STATE_ONLINE);
-		break;
+		return;
 	default:
 		ccw_device_done(cdev, DEV_STATE_NOT_OPER);
-		break;
+		return;
 	}
+	/* Start Path Group verification. */
+	sch->vpm = 0;	/* Start with no path groups set. */
+	cdev->private->state = DEV_STATE_VERIFY;
+	ccw_device_verify_start(cdev);
 }
 
 /*
@@ -562,8 +614,9 @@
 	}
 	/* Do we want to do path grouping? */
 	if (!cdev->private->options.pgroup) {
-		/* No, set state online immediately. */
-		ccw_device_done(cdev, DEV_STATE_ONLINE);
+		/* Start initial path verification. */
+		cdev->private->state = DEV_STATE_VERIFY;
+		ccw_device_verify_start(cdev);
 		return 0;
 	}
 	/* Do a SensePGID first. */
@@ -609,6 +662,7 @@
 	/* Are we doing path grouping? */
 	if (!cdev->private->options.pgroup) {
 		/* No, set state offline immediately. */
+		sch->vpm = 0;
 		ccw_device_done(cdev, DEV_STATE_OFFLINE);
 		return 0;
 	}
@@ -705,8 +759,6 @@
 {
 	struct subchannel *sch;
 
-	if (!cdev->private->options.pgroup)
-		return;
 	if (cdev->private->state == DEV_STATE_W4SENSE) {
 		cdev->private->flags.doverify = 1;
 		return;
@@ -995,8 +1047,7 @@
 ccw_device_wait4io_verify(struct ccw_device *cdev, enum dev_event dev_event)
 {
 	/* When the I/O has terminated, we have to start verification. */
-	if (cdev->private->options.pgroup)
-		cdev->private->flags.doverify = 1;
+	cdev->private->flags.doverify = 1;
 }
 
 static void
diff -urN linux-2.6.18-rc1/drivers/s390/cio/device_pgid.c linux-2.6.18-rc2/drivers/s390/cio/device_pgid.c
--- linux-2.6.18-rc1/drivers/s390/cio/device_pgid.c	2006-07-15 22:34:42.805022198 +0000
+++ linux-2.6.18-rc2/drivers/s390/cio/device_pgid.c	2006-07-15 22:34:48.085595395 +0000
@@ -33,12 +33,17 @@
 	struct subchannel *sch;
 	struct ccw1 *ccw;
 	int ret;
+	int i;
 
 	sch = to_subchannel(cdev->dev.parent);
+	/* Return if we already checked on all paths. */
+	if (cdev->private->imask == 0)
+		return (sch->lpm == 0) ? -ENODEV : -EACCES;
+	i = 8 - ffs(cdev->private->imask);
+
 	/* Setup sense path group id channel program. */
 	ccw = cdev->private->iccws;
 	ccw->cmd_code = CCW_CMD_SENSE_PGID;
-	ccw->cda = (__u32) __pa (&cdev->private->pgid);
 	ccw->count = sizeof (struct pgid);
 	ccw->flags = CCW_FLAG_SLI;
 
@@ -48,6 +53,7 @@
 	ret = -ENODEV;
 	while (cdev->private->imask != 0) {
 		/* Try every path multiple times. */
+		ccw->cda = (__u32) __pa (&cdev->private->pgid[i]);
 		if (cdev->private->iretry > 0) {
 			cdev->private->iretry--;
 			ret = cio_start (sch, cdev->private->iccws, 
@@ -64,7 +70,9 @@
 		}
 		cdev->private->imask >>= 1;
 		cdev->private->iretry = 5;
+		i++;
 	}
+
 	return ret;
 }
 
@@ -76,7 +84,7 @@
 	cdev->private->state = DEV_STATE_SENSE_PGID;
 	cdev->private->imask = 0x80;
 	cdev->private->iretry = 5;
-	memset (&cdev->private->pgid, 0, sizeof (struct pgid));
+	memset (&cdev->private->pgid, 0, sizeof (cdev->private->pgid));
 	ret = __ccw_device_sense_pgid_start(cdev);
 	if (ret && ret != -EBUSY)
 		ccw_device_sense_pgid_done(cdev, ret);
@@ -91,6 +99,7 @@
 {
 	struct subchannel *sch;
 	struct irb *irb;
+	int i;
 
 	sch = to_subchannel(cdev->dev.parent);
 	irb = &cdev->private->irb;
@@ -124,7 +133,8 @@
 			      sch->schid.sch_no, sch->orb.lpm);
 		return -EACCES;
 	}
-	if (cdev->private->pgid.inf.ps.state2 == SNID_STATE2_RESVD_ELSE) {
+	i = 8 - ffs(cdev->private->imask);
+	if (cdev->private->pgid[i].inf.ps.state2 == SNID_STATE2_RESVD_ELSE) {
 		CIO_MSG_EVENT(2, "SNID - Device %04x on Subchannel 0.%x.%04x "
 			      "is reserved by someone else\n",
 			      cdev->private->devno, sch->schid.ssid,
@@ -162,12 +172,6 @@
 	memset(&cdev->private->irb, 0, sizeof(struct irb));
 	switch (ret) {
 	/* 0, -ETIME, -EOPNOTSUPP, -EAGAIN, -EACCES or -EUSERS */
-	case 0:			/* Sense Path Group ID successful. */
-		if (cdev->private->pgid.inf.ps.state1 == SNID_STATE1_RESET)
-			memcpy(&cdev->private->pgid, &css[0]->global_pgid,
-			       sizeof(struct pgid));
-		ccw_device_sense_pgid_done(cdev, 0);
-		break;
 	case -EOPNOTSUPP:	/* Sense Path Group ID not supported */
 		ccw_device_sense_pgid_done(cdev, -EOPNOTSUPP);
 		break;
@@ -176,13 +180,15 @@
 		break;
 	case -EACCES:		/* channel is not operational. */
 		sch->lpm &= ~cdev->private->imask;
+		/* Fall through. */
+	case 0:			/* Sense Path Group ID successful. */
 		cdev->private->imask >>= 1;
 		cdev->private->iretry = 5;
 		/* Fall through. */
 	case -EAGAIN:		/* Try again. */
 		ret = __ccw_device_sense_pgid_start(cdev);
 		if (ret != 0 && ret != -EBUSY)
-			ccw_device_sense_pgid_done(cdev, -ENODEV);
+			ccw_device_sense_pgid_done(cdev, ret);
 		break;
 	case -EUSERS:		/* device is reserved for someone else. */
 		ccw_device_sense_pgid_done(cdev, -EUSERS);
@@ -203,20 +209,20 @@
 	sch = to_subchannel(cdev->dev.parent);
 
 	/* Setup sense path group id channel program. */
-	cdev->private->pgid.inf.fc = func;
+	cdev->private->pgid[0].inf.fc = func;
 	ccw = cdev->private->iccws;
 	if (!cdev->private->flags.pgid_single) {
-		cdev->private->pgid.inf.fc |= SPID_FUNC_MULTI_PATH;
+		cdev->private->pgid[0].inf.fc |= SPID_FUNC_MULTI_PATH;
 		ccw->cmd_code = CCW_CMD_SUSPEND_RECONN;
 		ccw->cda = 0;
 		ccw->count = 0;
 		ccw->flags = CCW_FLAG_SLI | CCW_FLAG_CC;
 		ccw++;
 	} else
-		cdev->private->pgid.inf.fc |= SPID_FUNC_SINGLE_PATH;
+		cdev->private->pgid[0].inf.fc |= SPID_FUNC_SINGLE_PATH;
 
 	ccw->cmd_code = CCW_CMD_SET_PGID;
-	ccw->cda = (__u32) __pa (&cdev->private->pgid);
+	ccw->cda = (__u32) __pa (&cdev->private->pgid[0]);
 	ccw->count = sizeof (struct pgid);
 	ccw->flags = CCW_FLAG_SLI;
 
@@ -244,6 +250,48 @@
 }
 
 /*
+ * Helper function to send a nop ccw down a path.
+ */
+static int __ccw_device_do_nop(struct ccw_device *cdev)
+{
+	struct subchannel *sch;
+	struct ccw1 *ccw;
+	int ret;
+
+	sch = to_subchannel(cdev->dev.parent);
+
+	/* Setup nop channel program. */
+	ccw = cdev->private->iccws;
+	ccw->cmd_code = CCW_CMD_NOOP;
+	ccw->cda = 0;
+	ccw->count = 0;
+	ccw->flags = CCW_FLAG_SLI;
+
+	/* Reset device status. */
+	memset(&cdev->private->irb, 0, sizeof(struct irb));
+
+	/* Try multiple times. */
+	ret = -ENODEV;
+	if (cdev->private->iretry > 0) {
+		cdev->private->iretry--;
+		ret = cio_start (sch, cdev->private->iccws,
+				 cdev->private->imask);
+		/* ret is 0, -EBUSY, -EACCES or -ENODEV */
+		if ((ret != -EACCES) && (ret != -ENODEV))
+			return ret;
+	}
+	/* nop command failed on this path. Switch it off. */
+	sch->lpm &= ~cdev->private->imask;
+	sch->vpm &= ~cdev->private->imask;
+	CIO_MSG_EVENT(2, "NOP - Device %04x on Subchannel "
+		      "0.%x.%04x, lpm %02X, became 'not operational'\n",
+		      cdev->private->devno, sch->schid.ssid,
+		      sch->schid.sch_no, cdev->private->imask);
+	return ret;
+}
+
+
+/*
  * Called from interrupt context to check if a valid answer
  * to Set Path Group ID was received.
  */
@@ -282,6 +330,29 @@
 	return 0;
 }
 
+/*
+ * Called from interrupt context to check the path status after a nop has
+ * been send.
+ */
+static int __ccw_device_check_nop(struct ccw_device *cdev)
+{
+	struct subchannel *sch;
+	struct irb *irb;
+
+	sch = to_subchannel(cdev->dev.parent);
+	irb = &cdev->private->irb;
+	if (irb->scsw.fctl & (SCSW_FCTL_HALT_FUNC | SCSW_FCTL_CLEAR_FUNC))
+		return -ETIME;
+	if (irb->scsw.cc == 3) {
+		CIO_MSG_EVENT(2, "NOP - Device %04x on Subchannel 0.%x.%04x,"
+			      " lpm %02X, became 'not operational'\n",
+			      cdev->private->devno, sch->schid.ssid,
+			      sch->schid.sch_no, cdev->private->imask);
+		return -EACCES;
+	}
+	return 0;
+}
+
 static void
 __ccw_device_verify_start(struct ccw_device *cdev)
 {
@@ -296,9 +367,12 @@
 			if ((sch->vpm & imask) != (sch->lpm & imask))
 				break;
 		cdev->private->imask = imask;
-		func = (sch->vpm & imask) ?
-			SPID_FUNC_RESIGN : SPID_FUNC_ESTABLISH;
-		ret = __ccw_device_do_pgid(cdev, func);
+		if (cdev->private->options.pgroup) {
+			func = (sch->vpm & imask) ?
+				SPID_FUNC_RESIGN : SPID_FUNC_ESTABLISH;
+			ret = __ccw_device_do_pgid(cdev, func);
+		} else
+			ret = __ccw_device_do_nop(cdev);
 		if (ret == 0 || ret == -EBUSY)
 			return;
 		cdev->private->iretry = 5;
@@ -327,7 +401,10 @@
 	if (ccw_device_accumulate_and_sense(cdev, irb) != 0)
 		return;
 	sch = to_subchannel(cdev->dev.parent);
-	ret = __ccw_device_check_pgid(cdev);
+	if (cdev->private->options.pgroup)
+		ret = __ccw_device_check_pgid(cdev);
+	else
+		ret = __ccw_device_check_nop(cdev);
 	memset(&cdev->private->irb, 0, sizeof(struct irb));
 	switch (ret) {
 	/* 0, -ETIME, -EAGAIN, -EOPNOTSUPP or -EACCES */
@@ -345,11 +422,10 @@
 		 * One of those strange devices which claim to be able
 		 * to do multipathing but not for Set Path Group ID.
 		 */
-		if (cdev->private->flags.pgid_single) {
-			ccw_device_verify_done(cdev, -EOPNOTSUPP);
-			break;
-		}
-		cdev->private->flags.pgid_single = 1;
+		if (cdev->private->flags.pgid_single)
+			cdev->private->options.pgroup = 0;
+		else
+			cdev->private->flags.pgid_single = 1;
 		/* fall through. */
 	case -EAGAIN:		/* Try again. */
 		__ccw_device_verify_start(cdev);
diff -urN linux-2.6.18-rc1/drivers/s390/cio/device_status.c linux-2.6.18-rc2/drivers/s390/cio/device_status.c
--- linux-2.6.18-rc1/drivers/s390/cio/device_status.c	2006-07-15 22:34:42.805022198 +0000
+++ linux-2.6.18-rc2/drivers/s390/cio/device_status.c	2006-07-15 22:34:48.085595395 +0000
@@ -67,8 +67,7 @@
 		      sch->schib.pmcw.pnom);
 
 	sch->lpm &= ~sch->schib.pmcw.pnom;
-	if (cdev->private->options.pgroup)
-		cdev->private->flags.doverify = 1;
+	cdev->private->flags.doverify = 1;
 }
 
 /*
@@ -180,7 +179,7 @@
 	cdev_irb->esw.esw0.erw.auth = irb->esw.esw0.erw.auth;
 	/* Copy path verification required flag. */
 	cdev_irb->esw.esw0.erw.pvrf = irb->esw.esw0.erw.pvrf;
-	if (irb->esw.esw0.erw.pvrf && cdev->private->options.pgroup)
+	if (irb->esw.esw0.erw.pvrf)
 		cdev->private->flags.doverify = 1;
 	/* Copy concurrent sense bit. */
 	cdev_irb->esw.esw0.erw.cons = irb->esw.esw0.erw.cons;
@@ -354,7 +353,7 @@
 	}
 	/* Check if path verification is required. */
 	if (ccw_device_accumulate_esw_valid(irb) &&
-	    irb->esw.esw0.erw.pvrf && cdev->private->options.pgroup) 
+	    irb->esw.esw0.erw.pvrf)
 		cdev->private->flags.doverify = 1;
 }
 
diff -urN linux-2.6.18-rc1/drivers/s390/cio/qdio.c linux-2.6.18-rc2/drivers/s390/cio/qdio.c
--- linux-2.6.18-rc1/drivers/s390/cio/qdio.c	2006-07-15 22:34:42.805022198 +0000
+++ linux-2.6.18-rc2/drivers/s390/cio/qdio.c	2006-07-15 22:34:48.085595395 +0000
@@ -2735,7 +2735,7 @@
 	QDIO_DBF_TEXT1(0,trace,dbf_text);
 	QDIO_DBF_TEXT0(0,setup,dbf_text);
 
-	cdev->private->qdio_data = 0;
+	cdev->private->qdio_data = NULL;
 
 	up(&irq_ptr->setting_up_sema);
 
diff -urN linux-2.6.18-rc1/drivers/s390/net/claw.c linux-2.6.18-rc2/drivers/s390/net/claw.c
--- linux-2.6.18-rc1/drivers/s390/net/claw.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/s390/net/claw.c	2006-07-15 22:34:48.089595829 +0000
@@ -529,7 +529,7 @@
         printk(KERN_INFO "%s:%s Enter  \n",dev->name,__FUNCTION__);
 #endif
 	CLAW_DBF_TEXT(4,trace,"open");
-	if (!dev | (dev->name[0] == 0x00)) {
+	if (!dev || (dev->name[0] == 0x00)) {
 		CLAW_DBF_TEXT(2,trace,"BadDev");
 	 	printk(KERN_WARNING "claw: Bad device at open failing \n");
 		return -ENODEV;
diff -urN linux-2.6.18-rc1/drivers/s390/net/iucv.c linux-2.6.18-rc2/drivers/s390/net/iucv.c
--- linux-2.6.18-rc1/drivers/s390/net/iucv.c	2006-07-15 22:34:42.813023067 +0000
+++ linux-2.6.18-rc2/drivers/s390/net/iucv.c	2006-07-15 22:34:48.093596263 +0000
@@ -692,7 +692,7 @@
 	iucv_debug(1, "entering");
 	if (iucv_cpuid != -1) {
 		smp_call_function_on(iucv_retrieve_buffer_cpuid,
-				     0, 0, 1, iucv_cpuid);
+				     NULL, 0, 1, iucv_cpuid);
 		/* Release the cpu reserved by iucv_declare_buffer. */
 		smp_put_cpu(iucv_cpuid);
 		iucv_cpuid = -1;
diff -urN linux-2.6.18-rc1/drivers/s390/net/netiucv.c linux-2.6.18-rc2/drivers/s390/net/netiucv.c
--- linux-2.6.18-rc1/drivers/s390/net/netiucv.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/s390/net/netiucv.c	2006-07-15 22:34:48.097596698 +0000
@@ -2029,7 +2029,7 @@
                 count = IFNAMSIZ-1;
 
         for (i=0, p=(char *)buf; i<count && *p; i++, p++) {
-                if ((*p == '\n') | (*p == ' ')) {
+                if ((*p == '\n') || (*p == ' ')) {
                         /* trailing lf, grr */
                         break;
                 } else {
diff -urN linux-2.6.18-rc1/drivers/s390/net/qeth_main.c linux-2.6.18-rc2/drivers/s390/net/qeth_main.c
--- linux-2.6.18-rc1/drivers/s390/net/qeth_main.c	2006-07-15 22:34:42.817023501 +0000
+++ linux-2.6.18-rc2/drivers/s390/net/qeth_main.c	2006-07-15 22:34:48.097596698 +0000
@@ -4420,8 +4420,10 @@
 	enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO;
 	struct qeth_eddp_context *ctx = NULL;
 	int tx_bytes = skb->len;
+#ifdef CONFIG_QETH_PERF_STATS
 	unsigned short nr_frags = skb_shinfo(skb)->nr_frags;
 	unsigned short tso_size = skb_shinfo(skb)->gso_size;
+#endif
 	int rc;
 
 	QETH_DBF_TEXT(trace, 6, "sendpkt");
@@ -4457,7 +4459,7 @@
 	queue = card->qdio.out_qs
 		[qeth_get_priority_queue(card, skb, ipv, cast_type)];
 
-	if (skb_shinfo(skb)->gso_size)
+	if (skb_is_gso(skb))
 		large_send = card->options.large_send;
 
 	/*are we able to do TSO ? If so ,prepare and send it from here */
@@ -4802,7 +4804,7 @@
 qeth_get_setassparms_cmd(struct qeth_card *, enum qeth_ipa_funcs,
 			 __u16, __u16, enum qeth_prot_versions);
 static int
-qeth_arp_query(struct qeth_card *card, char *udata)
+qeth_arp_query(struct qeth_card *card, char __user *udata)
 {
 	struct qeth_cmd_buffer *iob;
 	struct qeth_arp_query_info qinfo = {0, };
@@ -4935,7 +4937,7 @@
  * function to send SNMP commands to OSA-E card
  */
 static int
-qeth_snmp_command(struct qeth_card *card, char *udata)
+qeth_snmp_command(struct qeth_card *card, char __user *udata)
 {
 	struct qeth_cmd_buffer *iob;
 	struct qeth_ipa_cmd *cmd;
@@ -7907,9 +7909,9 @@
 }
 
 static struct ccw_device_id qeth_ids[] = {
-	{CCW_DEVICE(0x1731, 0x01), driver_info:QETH_CARD_TYPE_OSAE},
-	{CCW_DEVICE(0x1731, 0x05), driver_info:QETH_CARD_TYPE_IQD},
-	{CCW_DEVICE(0x1731, 0x06), driver_info:QETH_CARD_TYPE_OSN},
+	{CCW_DEVICE(0x1731, 0x01), .driver_info = QETH_CARD_TYPE_OSAE},
+	{CCW_DEVICE(0x1731, 0x05), .driver_info = QETH_CARD_TYPE_IQD},
+	{CCW_DEVICE(0x1731, 0x06), .driver_info = QETH_CARD_TYPE_OSN},
 	{},
 };
 MODULE_DEVICE_TABLE(ccw, qeth_ids);
@@ -8378,7 +8380,7 @@
 
 static struct notifier_block qeth_ip_notifier = {
 	qeth_ip_event,
-	0
+	NULL,
 };
 
 #ifdef CONFIG_QETH_IPV6
@@ -8431,7 +8433,7 @@
 
 static struct notifier_block qeth_ip6_notifier = {
 	qeth_ip6_event,
-	0
+	NULL,
 };
 #endif
 
@@ -8458,7 +8460,7 @@
 
 static struct notifier_block qeth_reboot_notifier = {
 	qeth_reboot_event,
-	0
+	NULL,
 };
 
 static int
diff -urN linux-2.6.18-rc1/drivers/s390/net/qeth_sys.c linux-2.6.18-rc2/drivers/s390/net/qeth_sys.c
--- linux-2.6.18-rc1/drivers/s390/net/qeth_sys.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/s390/net/qeth_sys.c	2006-07-15 22:34:48.101597132 +0000
@@ -1755,7 +1755,7 @@
 }
 
 
-static DRIVER_ATTR(group, 0200, 0, qeth_driver_group_store);
+static DRIVER_ATTR(group, 0200, NULL, qeth_driver_group_store);
 
 static ssize_t
 qeth_driver_notifier_register_store(struct device_driver *ddrv, const char *buf,
@@ -1783,7 +1783,7 @@
 	return count;
 }
 
-static DRIVER_ATTR(notifier_register, 0200, 0,
+static DRIVER_ATTR(notifier_register, 0200, NULL,
 		   qeth_driver_notifier_register_store);
 
 int
diff -urN linux-2.6.18-rc1/drivers/s390/net/smsgiucv.c linux-2.6.18-rc2/drivers/s390/net/smsgiucv.c
--- linux-2.6.18-rc1/drivers/s390/net/smsgiucv.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/s390/net/smsgiucv.c	2006-07-15 22:34:48.101597132 +0000
@@ -66,7 +66,7 @@
 		return;
 	}
 	rc = iucv_receive(eib->ippathid, eib->ipmsgid, eib->iptrgcls,
-			  msg, len, 0, 0, 0);
+			  msg, len, NULL, NULL, NULL);
 	if (rc == 0) {
 		msg[len] = 0;
 		EBCASC(msg, len);
@@ -122,7 +122,7 @@
 	struct smsg_callback *cb, *tmp;
 
 	spin_lock(&smsg_list_lock);
-	cb = 0;
+	cb = NULL;
 	list_for_each_entry(tmp, &smsg_list, list)
 		if (tmp->callback == callback &&
 		    strcmp(tmp->prefix, prefix) == 0) {
@@ -139,7 +139,7 @@
 {
 	if (smsg_handle > 0) {
 		cpcmd("SET SMSG OFF", NULL, 0, NULL);
-		iucv_sever(smsg_pathid, 0);
+		iucv_sever(smsg_pathid, NULL);
 		iucv_unregister_program(smsg_handle);
 		driver_unregister(&smsg_driver);
 	}
@@ -162,19 +162,19 @@
 		return rc;
 	}
 	smsg_handle = iucv_register_program("SMSGIUCV        ", "*MSG    ",
-					    pgmmask, &smsg_ops, 0);
+					    pgmmask, &smsg_ops, NULL);
 	if (!smsg_handle) {
 		printk(KERN_ERR "SMSGIUCV: failed to register to iucv");
 		driver_unregister(&smsg_driver);
 		return -EIO;	/* better errno ? */
 	}
-	rc = iucv_connect (&smsg_pathid, 255, 0, "*MSG    ", 0, 0, 0, 0,
-			   smsg_handle, 0);
+	rc = iucv_connect (&smsg_pathid, 255, NULL, "*MSG    ", NULL, 0,
+			   NULL, NULL, smsg_handle, NULL);
 	if (rc) {
 		printk(KERN_ERR "SMSGIUCV: failed to connect to *MSG");
 		iucv_unregister_program(smsg_handle);
 		driver_unregister(&smsg_driver);
-		smsg_handle = 0;
+		smsg_handle = NULL;
 		return -EIO;
 	}
 	cpcmd("SET SMSG IUCV", NULL, 0, NULL);
diff -urN linux-2.6.18-rc1/drivers/s390/s390mach.c linux-2.6.18-rc2/drivers/s390/s390mach.c
--- linux-2.6.18-rc1/drivers/s390/s390mach.c	2006-07-15 22:34:42.817023501 +0000
+++ linux-2.6.18-rc2/drivers/s390/s390mach.c	2006-07-15 22:34:48.101597132 +0000
@@ -111,6 +111,16 @@
 			break;
 		case CRW_RSC_CPATH:
 			pr_debug("source is channel path %02X\n", crw[0].rsid);
+			/*
+			 * Check for solicited machine checks. These are
+			 * created by reset channel path and need not be
+			 * reported to the common I/O layer.
+			 */
+			if (crw[chain].slct) {
+				DBG(KERN_INFO"solicited machine check for "
+				    "channel path %02X\n", crw[0].rsid);
+				break;
+			}
 			switch (crw[0].erc) {
 			case CRW_ERC_IPARM: /* Path has come. */
 				ret = chp_process_crw(crw[0].rsid, 1);
diff -urN linux-2.6.18-rc1/drivers/s390/scsi/zfcp_fsf.c linux-2.6.18-rc2/drivers/s390/scsi/zfcp_fsf.c
--- linux-2.6.18-rc1/drivers/s390/scsi/zfcp_fsf.c	2006-07-15 22:34:42.821023935 +0000
+++ linux-2.6.18-rc2/drivers/s390/scsi/zfcp_fsf.c	2006-07-15 22:34:48.105597566 +0000
@@ -2227,7 +2227,7 @@
 	/* setup new FSF request */
 	retval = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA,
 				     erp_action ? ZFCP_REQ_AUTO_CLEANUP : 0,
-				     0, &lock_flags, &fsf_req);
+				     NULL, &lock_flags, &fsf_req);
 	if (retval < 0) {
 		ZFCP_LOG_INFO("error: Out of resources. Could not create an "
                               "exchange port data request for"
diff -urN linux-2.6.18-rc1/drivers/s390/scsi/zfcp_scsi.c linux-2.6.18-rc2/drivers/s390/scsi/zfcp_scsi.c
--- linux-2.6.18-rc1/drivers/s390/scsi/zfcp_scsi.c	2006-07-15 22:34:42.825024369 +0000
+++ linux-2.6.18-rc2/drivers/s390/scsi/zfcp_scsi.c	2006-07-15 22:34:48.109598000 +0000
@@ -44,30 +44,29 @@
 
 struct zfcp_data zfcp_data = {
 	.scsi_host_template = {
-	      name:	               ZFCP_NAME,
-	      proc_name:               "zfcp",
-	      proc_info:               NULL,
-	      detect:	               NULL,
-	      slave_alloc:             zfcp_scsi_slave_alloc,
-	      slave_configure:         zfcp_scsi_slave_configure,
-	      slave_destroy:           zfcp_scsi_slave_destroy,
-	      queuecommand:            zfcp_scsi_queuecommand,
-	      eh_abort_handler:        zfcp_scsi_eh_abort_handler,
-	      eh_device_reset_handler: zfcp_scsi_eh_device_reset_handler,
-	      eh_bus_reset_handler:    zfcp_scsi_eh_bus_reset_handler,
-	      eh_host_reset_handler:   zfcp_scsi_eh_host_reset_handler,
-			               /* FIXME(openfcp): Tune */
-	      can_queue:               4096,
-	      this_id:	               -1,
-	      /*
-	       * FIXME:
-	       * one less? can zfcp_create_sbale cope with it?
-	       */
-	      sg_tablesize:            ZFCP_MAX_SBALES_PER_REQ,
-	      cmd_per_lun:             1,
-	      unchecked_isa_dma:       0,
-	      use_clustering:          1,
-	      sdev_attrs:              zfcp_sysfs_sdev_attrs,
+		.name			= ZFCP_NAME,
+		.proc_name		= "zfcp",
+		.proc_info		= NULL,
+		.detect			= NULL,
+		.slave_alloc		= zfcp_scsi_slave_alloc,
+		.slave_configure	= zfcp_scsi_slave_configure,
+		.slave_destroy		= zfcp_scsi_slave_destroy,
+		.queuecommand		= zfcp_scsi_queuecommand,
+		.eh_abort_handler	= zfcp_scsi_eh_abort_handler,
+		.eh_device_reset_handler = zfcp_scsi_eh_device_reset_handler,
+		.eh_bus_reset_handler	= zfcp_scsi_eh_bus_reset_handler,
+		.eh_host_reset_handler	= zfcp_scsi_eh_host_reset_handler,
+		.can_queue		= 4096,
+		.this_id		= -1,
+		/*
+		 * FIXME:
+		 * one less? can zfcp_create_sbale cope with it?
+		 */
+		.sg_tablesize		= ZFCP_MAX_SBALES_PER_REQ,
+		.cmd_per_lun		= 1,
+		.unchecked_isa_dma	= 0,
+		.use_clustering		= 1,
+		.sdev_attrs		= zfcp_sysfs_sdev_attrs,
 	},
 	.driver_version = ZFCP_VERSION,
 	/* rest initialised with zeros */
diff -urN linux-2.6.18-rc1/drivers/scsi/aic7xxx/aic79xx_osm.h linux-2.6.18-rc2/drivers/scsi/aic7xxx/aic79xx_osm.h
--- linux-2.6.18-rc1/drivers/scsi/aic7xxx/aic79xx_osm.h	2006-07-15 22:34:42.865028712 +0000
+++ linux-2.6.18-rc2/drivers/scsi/aic7xxx/aic79xx_osm.h	2006-07-15 22:34:48.149602343 +0000
@@ -93,7 +93,6 @@
 #endif
 
 /********************************** Misc Macros *******************************/
-#define	roundup(x, y)   ((((x)+((y)-1))/(y))*(y))
 #define	powerof2(x)	((((x)-1)&(x))==0)
 
 /************************* Forward Declarations *******************************/
diff -urN linux-2.6.18-rc1/drivers/serial/8250.c linux-2.6.18-rc2/drivers/serial/8250.c
--- linux-2.6.18-rc1/drivers/serial/8250.c	2006-07-15 22:34:43.065050424 +0000
+++ linux-2.6.18-rc2/drivers/serial/8250.c	2006-07-15 22:34:48.349624055 +0000
@@ -299,6 +299,7 @@
 
 static unsigned int serial_in(struct uart_8250_port *up, int offset)
 {
+	unsigned int tmp;
 	offset = map_8250_in_reg(up, offset) << up->port.regshift;
 
 	switch (up->port.iotype) {
@@ -317,6 +318,13 @@
 		return __raw_readl(up->port.membase + offset);
 #endif
 
+	case UPIO_TSI:
+		if (offset == UART_IIR) {
+			tmp = readl((u32 *)(up->port.membase + UART_RX));
+			return (cpu_to_le32(tmp) >> 8) & 0xff;
+		} else
+			return readb(up->port.membase + offset);
+
 	default:
 		return inb(up->port.iobase + offset);
 	}
@@ -346,6 +354,10 @@
 		__raw_writel(value, up->port.membase + offset);
 		break;
 #endif
+	case UPIO_TSI:
+		if (!((offset == UART_IER) && (value & UART_IER_UUE)))
+			writeb(value, up->port.membase + offset);
+		break;
 
 	default:
 		outb(value, up->port.iobase + offset);
@@ -2240,10 +2252,14 @@
 
 	touch_nmi_watchdog();
 
-	if (oops_in_progress) {
-		locked = spin_trylock_irqsave(&up->port.lock, flags);
+	local_irq_save(flags);
+	if (up->port.sysrq) {
+		/* serial8250_handle_port() already took the lock */
+		locked = 0;
+	} else if (oops_in_progress) {
+		locked = spin_trylock(&up->port.lock);
 	} else
-		spin_lock_irqsave(&up->port.lock, flags);
+		spin_lock(&up->port.lock);
 
 	/*
 	 *	First save the IER then disable the interrupts
@@ -2265,7 +2281,8 @@
 	serial_out(up, UART_IER, ier);
 
 	if (locked)
-		spin_unlock_irqrestore(&up->port.lock, flags);
+		spin_unlock(&up->port.lock);
+	local_irq_restore(flags);
 }
 
 static int serial8250_console_setup(struct console *co, char *options)
diff -urN linux-2.6.18-rc1/drivers/serial/dz.c linux-2.6.18-rc2/drivers/serial/dz.c
--- linux-2.6.18-rc1/drivers/serial/dz.c	2006-07-15 22:34:43.073051292 +0000
+++ linux-2.6.18-rc2/drivers/serial/dz.c	2006-07-15 22:34:48.353624489 +0000
@@ -673,7 +673,7 @@
 }
 
 #ifdef CONFIG_SERIAL_DZ_CONSOLE
-static void dz_console_putchar(struct uart_port *port, int ch)
+static void dz_console_putchar(struct uart_port *uport, int ch)
 {
 	struct dz_port *dport = (struct dz_port *)uport;
 	unsigned long flags;
diff -urN linux-2.6.18-rc1/drivers/serial/ip22zilog.c linux-2.6.18-rc2/drivers/serial/ip22zilog.c
--- linux-2.6.18-rc1/drivers/serial/ip22zilog.c	2006-07-15 22:34:43.077051727 +0000
+++ linux-2.6.18-rc2/drivers/serial/ip22zilog.c	2006-07-15 22:34:48.357624923 +0000
@@ -1143,9 +1143,8 @@
 		up[(chip * 2) + 1].port.fifosize = 1;
 		up[(chip * 2) + 1].port.ops = &ip22zilog_pops;
 		up[(chip * 2) + 1].port.type = PORT_IP22ZILOG;
-		up[(chip * 2) + 1].port.flags |= IP22ZILOG_FLAG_IS_CHANNEL_A;
 		up[(chip * 2) + 1].port.line = (chip * 2) + 1;
-		up[(chip * 2) + 1].flags = 0;
+		up[(chip * 2) + 1].flags |= IP22ZILOG_FLAG_IS_CHANNEL_A;
 	}
 }
 
diff -urN linux-2.6.18-rc1/drivers/serial/serial_core.c linux-2.6.18-rc2/drivers/serial/serial_core.c
--- linux-2.6.18-rc1/drivers/serial/serial_core.c	2006-07-15 22:34:43.081052161 +0000
+++ linux-2.6.18-rc2/drivers/serial/serial_core.c	2006-07-15 22:34:48.365625792 +0000
@@ -2036,6 +2036,7 @@
 	case UPIO_MEM:
 	case UPIO_MEM32:
 	case UPIO_AU:
+	case UPIO_TSI:
 		snprintf(address, sizeof(address),
 			 "MMIO 0x%lx", port->mapbase);
 		break;
diff -urN linux-2.6.18-rc1/drivers/serial/sunsab.c linux-2.6.18-rc2/drivers/serial/sunsab.c
--- linux-2.6.18-rc1/drivers/serial/sunsab.c	2006-07-15 22:34:43.085052595 +0000
+++ linux-2.6.18-rc2/drivers/serial/sunsab.c	2006-07-15 22:34:48.365625792 +0000
@@ -1052,7 +1052,7 @@
 	if (err)
 		return err;
 
-	err = sunsab_init_one(&up[0], op, 0,
+	err = sunsab_init_one(&up[1], op, 0,
 			      (inst * 2) + 1);
 	if (err) {
 		of_iounmap(up[0].port.membase,
diff -urN linux-2.6.18-rc1/drivers/serial/sunsu.c linux-2.6.18-rc2/drivers/serial/sunsu.c
--- linux-2.6.18-rc1/drivers/serial/sunsu.c	2006-07-15 22:34:43.085052595 +0000
+++ linux-2.6.18-rc2/drivers/serial/sunsu.c	2006-07-15 22:34:48.369626226 +0000
@@ -1200,6 +1200,11 @@
 	if (up->port.type == PORT_UNKNOWN)
 		return -ENODEV;
 
+	printk("%s: %s port at %lx, irq %u\n",
+	       to_of_device(up->port.dev)->node->full_name,
+	       (up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse",
+	       up->port.mapbase, up->port.irq);
+
 #ifdef CONFIG_SERIO
 	serio = &up->serio;
 	serio->port_data = up;
@@ -1406,25 +1411,35 @@
 	struct device_node *dp = op->node;
 	struct uart_sunsu_port *up;
 	struct resource *rp;
+	enum su_type type;
 	int err;
 
-	if (inst >= UART_NR)
-		return -EINVAL;
+	type = su_get_type(dp);
+	if (type == SU_PORT_PORT) {
+		if (inst >= UART_NR)
+			return -EINVAL;
+		up = &sunsu_ports[inst];
+	} else {
+		up = kzalloc(sizeof(*up), GFP_KERNEL);
+		if (!up)
+			return -ENOMEM;
+	}
 
-	up = &sunsu_ports[inst];
 	up->port.line = inst;
 
 	spin_lock_init(&up->port.lock);
 
-	up->su_type = su_get_type(dp);
+	up->su_type = type;
 
 	rp = &op->resource[0];
-	up->port.mapbase = op->resource[0].start;
-
+	up->port.mapbase = rp->start;
 	up->reg_size = (rp->end - rp->start) + 1;
 	up->port.membase = of_ioremap(rp, 0, up->reg_size, "su");
-	if (!up->port.membase)
+	if (!up->port.membase) {
+		if (type != SU_PORT_PORT)
+			kfree(up);
 		return -ENOMEM;
+	}
 
 	up->port.irq = op->irqs[0];
 
@@ -1436,8 +1451,11 @@
 	err = 0;
 	if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) {
 		err = sunsu_kbd_ms_init(up);
-		if (err)
+		if (err) {
+			kfree(up);
 			goto out_unmap;
+		}
+		dev_set_drvdata(&op->dev, up);
 
 		return 0;
 	}
@@ -1476,8 +1494,12 @@
 #ifdef CONFIG_SERIO
 		serio_unregister_port(&up->serio);
 #endif
-	} else if (up->port.type != PORT_UNKNOWN)
+		kfree(up);
+	} else if (up->port.type != PORT_UNKNOWN) {
 		uart_remove_one_port(&sunsu_reg, &up->port);
+	}
+
+	dev_set_drvdata(&dev->dev, NULL);
 
 	return 0;
 }
diff -urN linux-2.6.18-rc1/drivers/serial/vr41xx_siu.c linux-2.6.18-rc2/drivers/serial/vr41xx_siu.c
--- linux-2.6.18-rc1/drivers/serial/vr41xx_siu.c	2006-07-15 22:34:43.089053029 +0000
+++ linux-2.6.18-rc2/drivers/serial/vr41xx_siu.c	2006-07-15 22:34:48.369626226 +0000
@@ -38,6 +38,7 @@
 #include <linux/tty_flip.h>
 
 #include <asm/io.h>
+#include <asm/vr41xx/irq.h>
 #include <asm/vr41xx/siu.h>
 #include <asm/vr41xx/vr41xx.h>
 
diff -urN linux-2.6.18-rc1/drivers/usb/Kconfig linux-2.6.18-rc2/drivers/usb/Kconfig
--- linux-2.6.18-rc1/drivers/usb/Kconfig	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/usb/Kconfig	2006-07-15 22:34:48.377627094 +0000
@@ -23,6 +23,7 @@
 	default y if ARCH_LH7A404
 	default y if ARCH_S3C2410
 	default y if PXA27x
+	default y if ARCH_EP93XX
 	default y if ARCH_AT91RM9200
 	# PPC:
 	default y if STB03xxx
diff -urN linux-2.6.18-rc1/drivers/usb/Makefile linux-2.6.18-rc2/drivers/usb/Makefile
--- linux-2.6.18-rc1/drivers/usb/Makefile	2006-07-15 22:34:43.093053464 +0000
+++ linux-2.6.18-rc2/drivers/usb/Makefile	2006-07-15 22:34:48.377627094 +0000
@@ -48,7 +48,7 @@
 obj-$(CONFIG_USB_SERIAL)	+= serial/
 
 obj-$(CONFIG_USB_AUERSWALD)	+= misc/
-obj-$(CONFIG_USB_CY7C63)	+= misc/
+obj-$(CONFIG_USB_CYPRESS_CY7C63)+= misc/
 obj-$(CONFIG_USB_CYTHERM)	+= misc/
 obj-$(CONFIG_USB_EMI26)		+= misc/
 obj-$(CONFIG_USB_EMI62)		+= misc/
diff -urN linux-2.6.18-rc1/drivers/usb/class/cdc-acm.c linux-2.6.18-rc2/drivers/usb/class/cdc-acm.c
--- linux-2.6.18-rc1/drivers/usb/class/cdc-acm.c	2006-07-15 22:34:43.097053898 +0000
+++ linux-2.6.18-rc2/drivers/usb/class/cdc-acm.c	2006-07-15 22:34:48.377627094 +0000
@@ -291,13 +291,13 @@
 	struct acm_ru *rcv = urb->context;
 	struct acm *acm = rcv->instance;
 	int status = urb->status;
-	dbg("Entering acm_read_bulk with status %d\n", urb->status);
+	dbg("Entering acm_read_bulk with status %d", urb->status);
 
 	if (!ACM_READY(acm))
 		return;
 
 	if (status)
-		dev_dbg(&acm->data->dev, "bulk rx status %d\n", status);
+		dev_dbg(&acm->data->dev, "bulk rx status %d", status);
 
 	buf = rcv->buffer;
 	buf->size = urb->actual_length;
@@ -343,7 +343,7 @@
 	list_del(&buf->list);
 	spin_unlock(&acm->read_lock);
 
-	dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d\n", buf, buf->size);
+	dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d", buf, buf->size);
 
 	tty_buffer_request_room(tty, buf->size);
 	if (!acm->throttle)
@@ -394,7 +394,7 @@
 		rcv->urb->transfer_dma = buf->dma;
 		rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
-		dbg("acm_rx_tasklet: sending urb 0x%p, rcv 0x%p, buf 0x%p\n", rcv->urb, rcv, buf);
+		dbg("acm_rx_tasklet: sending urb 0x%p, rcv 0x%p, buf 0x%p", rcv->urb, rcv, buf);
 
 		/* This shouldn't kill the driver as unsuccessful URBs are returned to the
 		   free-urbs-pool and resubmited ASAP */
@@ -413,7 +413,7 @@
 {
 	struct acm *acm = (struct acm *)urb->context;
 
-	dbg("Entering acm_write_bulk with status %d\n", urb->status);
+	dbg("Entering acm_write_bulk with status %d", urb->status);
 
 	acm_write_done(acm);
 	acm_write_start(acm);
@@ -424,7 +424,7 @@
 static void acm_softint(void *private)
 {
 	struct acm *acm = private;
-	dbg("Entering acm_softint.\n");
+	dbg("Entering acm_softint.");
 	
 	if (!ACM_READY(acm))
 		return;
@@ -440,7 +440,7 @@
 	struct acm *acm;
 	int rv = -EINVAL;
 	int i;
-	dbg("Entering acm_tty_open.\n");
+	dbg("Entering acm_tty_open.");
 
 	mutex_lock(&open_mutex);
 
@@ -541,7 +541,7 @@
 	int wbn;
 	struct acm_wb *wb;
 
-	dbg("Entering acm_tty_write to write %d bytes,\n", count);
+	dbg("Entering acm_tty_write to write %d bytes,", count);
 
 	if (!ACM_READY(acm))
 		return -EINVAL;
@@ -793,7 +793,7 @@
 
 	if (!buflen) {
 		if (intf->cur_altsetting->endpoint->extralen && intf->cur_altsetting->endpoint->extra) {
-			dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint\n");
+			dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint");
 			buflen = intf->cur_altsetting->endpoint->extralen;
 			buffer = intf->cur_altsetting->endpoint->extra;
 		} else {
@@ -842,24 +842,24 @@
 
 	if (!union_header) {
 		if (call_interface_num > 0) {
-			dev_dbg(&intf->dev,"No union descriptor, using call management descriptor\n");
+			dev_dbg(&intf->dev,"No union descriptor, using call management descriptor");
 			data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = call_interface_num));
 			control_interface = intf;
 		} else {
-			dev_dbg(&intf->dev,"No union descriptor, giving up\n");
+			dev_dbg(&intf->dev,"No union descriptor, giving up");
 			return -ENODEV;
 		}
 	} else {
 		control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
 		data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = union_header->bSlaveInterface0));
 		if (!control_interface || !data_interface) {
-			dev_dbg(&intf->dev,"no interfaces\n");
+			dev_dbg(&intf->dev,"no interfaces");
 			return -ENODEV;
 		}
 	}
 	
 	if (data_interface_num != call_interface_num)
-		dev_dbg(&intf->dev,"Seperate call control interface. That is not fully supported.\n");
+		dev_dbg(&intf->dev,"Seperate call control interface. That is not fully supported.");
 
 skip_normal_probe:
 
@@ -867,7 +867,7 @@
 	if (data_interface->cur_altsetting->desc.bInterfaceClass != CDC_DATA_INTERFACE_TYPE) {
 		if (control_interface->cur_altsetting->desc.bInterfaceClass == CDC_DATA_INTERFACE_TYPE) {
 			struct usb_interface *t;
-			dev_dbg(&intf->dev,"Your device has switched interfaces.\n");
+			dev_dbg(&intf->dev,"Your device has switched interfaces.");
 
 			t = control_interface;
 			control_interface = data_interface;
@@ -878,7 +878,7 @@
 	}
 	
 	if (usb_interface_claimed(data_interface)) { /* valid in this context */
-		dev_dbg(&intf->dev,"The data interface isn't available\n");
+		dev_dbg(&intf->dev,"The data interface isn't available");
 		return -EBUSY;
 	}
 
@@ -895,7 +895,7 @@
 	if ((epread->bEndpointAddress & USB_DIR_IN) != USB_DIR_IN) {
 		/* descriptors are swapped */
 		struct usb_endpoint_descriptor *t;
-		dev_dbg(&intf->dev,"The data interface has switched endpoints\n");
+		dev_dbg(&intf->dev,"The data interface has switched endpoints");
 		
 		t = epread;
 		epread = epwrite;
@@ -910,7 +910,7 @@
 	}
 
 	if (!(acm = kzalloc(sizeof(struct acm), GFP_KERNEL))) {
-		dev_dbg(&intf->dev, "out of memory (acm kzalloc)\n");
+		dev_dbg(&intf->dev, "out of memory (acm kzalloc)");
 		goto alloc_fail;
 	}
 
@@ -936,26 +936,26 @@
 
 	buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
 	if (!buf) {
-		dev_dbg(&intf->dev, "out of memory (ctrl buffer alloc)\n");
+		dev_dbg(&intf->dev, "out of memory (ctrl buffer alloc)");
 		goto alloc_fail2;
 	}
 	acm->ctrl_buffer = buf;
 
 	if (acm_write_buffers_alloc(acm) < 0) {
-		dev_dbg(&intf->dev, "out of memory (write buffer alloc)\n");
+		dev_dbg(&intf->dev, "out of memory (write buffer alloc)");
 		goto alloc_fail4;
 	}
 
 	acm->ctrlurb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!acm->ctrlurb) {
-		dev_dbg(&intf->dev, "out of memory (ctrlurb kmalloc)\n");
+		dev_dbg(&intf->dev, "out of memory (ctrlurb kmalloc)");
 		goto alloc_fail5;
 	}
 	for (i = 0; i < num_rx_buf; i++) {
 		struct acm_ru *rcv = &(acm->ru[i]);
 
 		if (!(rcv->urb = usb_alloc_urb(0, GFP_KERNEL))) {
-			dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)\n");
+			dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)");
 			goto alloc_fail7;
 		}
 
@@ -966,13 +966,13 @@
 		struct acm_rb *buf = &(acm->rb[i]);
 
 		if (!(buf->base = usb_buffer_alloc(acm->dev, readsize, GFP_KERNEL, &buf->dma))) {
-			dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)\n");
+			dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)");
 			goto alloc_fail7;
 		}
 	}
 	acm->writeurb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!acm->writeurb) {
-		dev_dbg(&intf->dev, "out of memory (writeurb kmalloc)\n");
+		dev_dbg(&intf->dev, "out of memory (writeurb kmalloc)");
 		goto alloc_fail7;
 	}
 
@@ -1086,6 +1086,9 @@
 	{ USB_DEVICE(0x0ace, 0x1608), /* ZyDAS 56K USB MODEM */
 	.driver_info = SINGLE_RX_URB, /* firmware bug */
 	},
+	{ USB_DEVICE(0x0ace, 0x1611), /* ZyDAS 56K USB MODEM - new version */
+	.driver_info = SINGLE_RX_URB, /* firmware bug */
+	},
 	/* control interfaces with various AT-command sets */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
 		USB_CDC_ACM_PROTO_AT_V25TER) },
diff -urN linux-2.6.18-rc1/drivers/usb/core/Kconfig linux-2.6.18-rc2/drivers/usb/core/Kconfig
--- linux-2.6.18-rc1/drivers/usb/core/Kconfig	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/usb/core/Kconfig	2006-07-15 22:34:48.377627094 +0000
@@ -31,9 +31,6 @@
 	  For the format of the various /proc/bus/usb/ files, please read
 	  <file:Documentation/usb/proc_usb_info.txt>.
 
-	  Please note that this code is completely unrelated to devfs, the
-	  "/dev file system support".
-
 	  Most users want to say Y here.
 
 config USB_BANDWIDTH
diff -urN linux-2.6.18-rc1/drivers/usb/core/hub.c linux-2.6.18-rc2/drivers/usb/core/hub.c
--- linux-2.6.18-rc1/drivers/usb/core/hub.c	2006-07-15 22:34:43.101054332 +0000
+++ linux-2.6.18-rc2/drivers/usb/core/hub.c	2006-07-15 22:34:48.381627529 +0000
@@ -1790,7 +1790,10 @@
 	 * and device drivers will know about any resume quirks.
 	 */
 	status = usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
-	if (status < 2)
+	if (status >= 0)
+		status = (status == 2 ? 0 : -ENODEV);
+
+	if (status)
 		dev_dbg(&udev->dev,
 			"gone after usb resume? status %d\n",
 			status);
@@ -1879,7 +1882,12 @@
 			dev_dbg(hub->intfdev,
 				"port %d status %04x.%04x after resume, %d\n",
 				port1, portchange, devstatus, status);
+			if (status >= 0)
+				status = -ENODEV;
 		} else {
+			if (portchange & USB_PORT_STAT_C_SUSPEND)
+				clear_port_feature(hub->hdev, port1,
+						USB_PORT_FEAT_C_SUSPEND);
 			/* TRSMRCY = 10 msec */
 			msleep(10);
 			if (udev)
diff -urN linux-2.6.18-rc1/drivers/usb/core/inode.c linux-2.6.18-rc2/drivers/usb/core/inode.c
--- linux-2.6.18-rc1/drivers/usb/core/inode.c	2006-07-15 22:34:43.101054332 +0000
+++ linux-2.6.18-rc2/drivers/usb/core/inode.c	2006-07-15 22:34:48.381627529 +0000
@@ -695,7 +695,7 @@
 		wake_up_all(&ds->wait);
 		list_del_init(&ds->list);
 		if (ds->discsignr) {
-			sinfo.si_signo = SIGPIPE;
+			sinfo.si_signo = ds->discsignr;
 			sinfo.si_errno = EPIPE;
 			sinfo.si_code = SI_ASYNCIO;
 			sinfo.si_addr = ds->disccontext;
diff -urN linux-2.6.18-rc1/drivers/usb/gadget/epautoconf.c linux-2.6.18-rc2/drivers/usb/gadget/epautoconf.c
--- linux-2.6.18-rc1/drivers/usb/gadget/epautoconf.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/usb/gadget/epautoconf.c	2006-07-15 22:34:48.385627963 +0000
@@ -34,12 +34,12 @@
 
 
 /* we must assign addresses for configurable endpoints (like net2280) */
-static __initdata unsigned epnum;
+static __devinitdata unsigned epnum;
 
 // #define MANY_ENDPOINTS
 #ifdef MANY_ENDPOINTS
 /* more than 15 configurable endpoints */
-static __initdata unsigned in_epnum;
+static __devinitdata unsigned in_epnum;
 #endif
 
 
@@ -59,7 +59,7 @@
  * NOTE:  each endpoint is unidirectional, as specified by its USB
  * descriptor; and isn't specific to a configuration or altsetting.
  */
-static int __init
+static int __devinit
 ep_matches (
 	struct usb_gadget		*gadget,
 	struct usb_ep			*ep,
@@ -73,7 +73,7 @@
 	/* endpoint already claimed? */
 	if (0 != ep->driver_data)
 		return 0;
-		
+
 	/* only support ep0 for portable CONTROL traffic */
 	type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
 	if (USB_ENDPOINT_XFER_CONTROL == type)
@@ -186,7 +186,7 @@
 	return 1;
 }
 
-static struct usb_ep * __init
+static struct usb_ep * __devinit
 find_ep (struct usb_gadget *gadget, const char *name)
 {
 	struct usb_ep	*ep;
@@ -228,7 +228,7 @@
  *
  * On failure, this returns a null endpoint descriptor.
  */
-struct usb_ep * __init usb_ep_autoconfig (
+struct usb_ep * __devinit usb_ep_autoconfig (
 	struct usb_gadget		*gadget,
 	struct usb_endpoint_descriptor	*desc
 )
@@ -276,7 +276,7 @@
 			return ep;
 	}
 
-	/* Second, look at endpoints until an unclaimed one looks usable */ 
+	/* Second, look at endpoints until an unclaimed one looks usable */
 	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
 		if (ep_matches (gadget, ep, desc))
 			return ep;
@@ -295,7 +295,7 @@
  * state such as ep->driver_data and the record of assigned endpoints
  * used by usb_ep_autoconfig().
  */
-void __init usb_ep_autoconfig_reset (struct usb_gadget *gadget)
+void __devinit usb_ep_autoconfig_reset (struct usb_gadget *gadget)
 {
 	struct usb_ep	*ep;
 
diff -urN linux-2.6.18-rc1/drivers/usb/gadget/ether.c linux-2.6.18-rc2/drivers/usb/gadget/ether.c
--- linux-2.6.18-rc1/drivers/usb/gadget/ether.c	2006-07-15 22:34:43.105054766 +0000
+++ linux-2.6.18-rc2/drivers/usb/gadget/ether.c	2006-07-15 22:34:48.385627963 +0000
@@ -2131,7 +2131,7 @@
 }
 
 
-static void __exit
+static void /* __init_or_exit */
 eth_unbind (struct usb_gadget *gadget)
 {
 	struct eth_dev		*dev = get_gadget_data (gadget);
@@ -2158,7 +2158,7 @@
 	set_gadget_data (gadget, NULL);
 }
 
-static u8 __init nibble (unsigned char c)
+static u8 __devinit nibble (unsigned char c)
 {
 	if (likely (isdigit (c)))
 		return c - '0';
@@ -2168,7 +2168,7 @@
 	return 0;
 }
 
-static int __init get_ether_addr(const char *str, u8 *dev_addr)
+static int __devinit get_ether_addr(const char *str, u8 *dev_addr)
 {
 	if (str) {
 		unsigned	i;
@@ -2189,7 +2189,7 @@
 	return 1;
 }
 
-static int __init
+static int __devinit
 eth_bind (struct usb_gadget *gadget)
 {
 	struct eth_dev		*dev;
diff -urN linux-2.6.18-rc1/drivers/usb/gadget/file_storage.c linux-2.6.18-rc2/drivers/usb/gadget/file_storage.c
--- linux-2.6.18-rc1/drivers/usb/gadget/file_storage.c	2006-07-15 22:34:43.105054766 +0000
+++ linux-2.6.18-rc2/drivers/usb/gadget/file_storage.c	2006-07-15 22:34:48.389628397 +0000
@@ -3691,7 +3691,7 @@
 	kref_put(&fsg->ref, fsg_release);
 }
 
-static void __exit fsg_unbind(struct usb_gadget *gadget)
+static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget)
 {
 	struct fsg_dev		*fsg = get_gadget_data(gadget);
 	int			i;
diff -urN linux-2.6.18-rc1/drivers/usb/gadget/rndis.c linux-2.6.18-rc2/drivers/usb/gadget/rndis.c
--- linux-2.6.18-rc1/drivers/usb/gadget/rndis.c	2006-07-15 22:34:43.113055635 +0000
+++ linux-2.6.18-rc2/drivers/usb/gadget/rndis.c	2006-07-15 22:34:48.393628831 +0000
@@ -1398,7 +1398,7 @@
 #endif	/* CONFIG_USB_GADGET_DEBUG_FILES */
 
 
-int __init rndis_init (void)
+int __devinit rndis_init (void)
 {
 	u8 i;
 
diff -urN linux-2.6.18-rc1/drivers/usb/gadget/rndis.h linux-2.6.18-rc2/drivers/usb/gadget/rndis.h
--- linux-2.6.18-rc1/drivers/usb/gadget/rndis.h	2006-07-15 22:34:43.113055635 +0000
+++ linux-2.6.18-rc2/drivers/usb/gadget/rndis.h	2006-07-15 22:34:48.393628831 +0000
@@ -264,7 +264,7 @@
 int  rndis_state (int configNr);
 extern void rndis_set_host_mac (int configNr, const u8 *addr);
 
-int __init rndis_init (void);
+int __devinit rndis_init (void);
 void rndis_exit (void);
 
 #endif  /* _LINUX_RNDIS_H */
diff -urN linux-2.6.18-rc1/drivers/usb/gadget/serial.c linux-2.6.18-rc2/drivers/usb/gadget/serial.c
--- linux-2.6.18-rc1/drivers/usb/gadget/serial.c	2006-07-15 22:34:43.113055635 +0000
+++ linux-2.6.18-rc2/drivers/usb/gadget/serial.c	2006-07-15 22:34:48.397629266 +0000
@@ -1473,7 +1473,7 @@
  * Called on module unload.  Frees the control request and device
  * structure.
  */
-static void __exit gs_unbind(struct usb_gadget *gadget)
+static void /* __init_or_exit */ gs_unbind(struct usb_gadget *gadget)
 {
 	struct gs_dev *dev = get_gadget_data(gadget);
 
diff -urN linux-2.6.18-rc1/drivers/usb/gadget/zero.c linux-2.6.18-rc2/drivers/usb/gadget/zero.c
--- linux-2.6.18-rc1/drivers/usb/gadget/zero.c	2006-07-15 22:34:43.113055635 +0000
+++ linux-2.6.18-rc2/drivers/usb/gadget/zero.c	2006-07-15 22:34:48.397629266 +0000
@@ -1121,7 +1121,7 @@
 
 /*-------------------------------------------------------------------------*/
 
-static void __exit
+static void /* __init_or_exit */
 zero_unbind (struct usb_gadget *gadget)
 {
 	struct zero_dev		*dev = get_gadget_data (gadget);
diff -urN linux-2.6.18-rc1/drivers/usb/host/ehci-au1xxx.c linux-2.6.18-rc2/drivers/usb/host/ehci-au1xxx.c
--- linux-2.6.18-rc1/drivers/usb/host/ehci-au1xxx.c	2006-07-15 22:34:43.113055635 +0000
+++ linux-2.6.18-rc2/drivers/usb/host/ehci-au1xxx.c	2006-07-15 22:34:48.397629266 +0000
@@ -41,8 +41,6 @@
 #endif
 #define USBH_DISABLE      (USB_MCFG_EBMEN | USB_MCFG_EMEMEN)
 
-#endif				/* Au1200 */
-
 extern int usb_disabled(void);
 
 /*-------------------------------------------------------------------------*/
@@ -107,9 +105,9 @@
 
 	/* Au1200 AB USB does not support coherent memory */
 	if (!(read_c0_prid() & 0xff)) {
-		pr_info("%s: this is chip revision AB!\n", dev->dev.name);
+		pr_info("%s: this is chip revision AB!\n", dev->name);
 		pr_info("%s: update your board or re-configure the kernel\n",
-			dev->dev.name);
+			dev->name);
 		return -ENODEV;
 	}
 #endif
@@ -228,9 +226,8 @@
 
 /*-------------------------------------------------------------------------*/
 
-static int ehci_hcd_au1xxx_drv_probe(struct device *dev)
+static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
 	struct usb_hcd *hcd = NULL;
 	int ret;
 
@@ -243,10 +240,9 @@
 	return ret;
 }
 
-static int ehci_hcd_au1xxx_drv_remove(struct device *dev)
+static int ehci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
 
 	usb_ehci_au1xxx_remove(hcd, pdev);
 	return 0;
@@ -269,12 +265,13 @@
 }
 */
 MODULE_ALIAS("au1xxx-ehci");
-/* FIXME use "struct platform_driver" */
-static struct device_driver ehci_hcd_au1xxx_driver = {
-	.name = "au1xxx-ehci",
-	.bus = &platform_bus_type,
+static struct platform_driver ehci_hcd_au1xxx_driver = {
 	.probe = ehci_hcd_au1xxx_drv_probe,
 	.remove = ehci_hcd_au1xxx_drv_remove,
 	/*.suspend      = ehci_hcd_au1xxx_drv_suspend, */
 	/*.resume       = ehci_hcd_au1xxx_drv_resume, */
+	.driver = {
+		.name = "au1xxx-ehci",
+		.bus = &platform_bus_type
+	}
 };
diff -urN linux-2.6.18-rc1/drivers/usb/host/ehci-hcd.c linux-2.6.18-rc2/drivers/usb/host/ehci-hcd.c
--- linux-2.6.18-rc1/drivers/usb/host/ehci-hcd.c	2006-07-15 22:34:43.117056069 +0000
+++ linux-2.6.18-rc2/drivers/usb/host/ehci-hcd.c	2006-07-15 22:34:48.397629266 +0000
@@ -625,10 +625,11 @@
 			writel (status | CMD_RUN, &ehci->regs->command);
 
 		while (i--) {
-			status = readl (&ehci->regs->port_status [i]);
-			if (status & PORT_OWNER)
+			int pstatus = readl (&ehci->regs->port_status [i]);
+
+			if (pstatus & PORT_OWNER)
 				continue;
-			if (!(status & PORT_RESUME)
+			if (!(pstatus & PORT_RESUME)
 					|| ehci->reset_done [i] != 0)
 				continue;
 
diff -urN linux-2.6.18-rc1/drivers/usb/host/ohci-au1xxx.c linux-2.6.18-rc2/drivers/usb/host/ohci-au1xxx.c
--- linux-2.6.18-rc1/drivers/usb/host/ohci-au1xxx.c	2006-07-15 22:34:43.121056503 +0000
+++ linux-2.6.18-rc2/drivers/usb/host/ohci-au1xxx.c	2006-07-15 22:34:48.401629700 +0000
@@ -101,13 +101,16 @@
 
 #endif  /* Au1200 */
 
+#ifndef CONFIG_SOC_AU1200
 	/* wait for reset complete (read register twice; see au1500 errata) */
 	while (au_readl(USB_HOST_CONFIG),
 		!(au_readl(USB_HOST_CONFIG) & USBH_ENABLE_RD))
+#endif
 		udelay(1000);
 
 	printk(KERN_DEBUG __FILE__
 	": Clock to USB host has been enabled \n");
+#endif
 }
 
 static void au1xxx_stop_ohc(struct platform_device *dev)
@@ -157,9 +160,9 @@
 	/* Au1200 AB USB does not support coherent memory */
 	if (!(read_c0_prid() & 0xff)) {
 		pr_info("%s: this is chip revision AB !!\n",
-			dev->dev.name);
+			dev->name);
 		pr_info("%s: update your board or re-configure the kernel\n",
-			dev->dev.name);
+			dev->name);
 		return -ENODEV;
 	}
 #endif
diff -urN linux-2.6.18-rc1/drivers/usb/host/ohci-ep93xx.c linux-2.6.18-rc2/drivers/usb/host/ohci-ep93xx.c
--- linux-2.6.18-rc1/drivers/usb/host/ohci-ep93xx.c	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/drivers/usb/host/ohci-ep93xx.c	2006-07-15 22:34:48.401629700 +0000
@@ -0,0 +1,225 @@
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ * (C) Copyright 2002 Hewlett-Packard Company
+ *
+ * Bus Glue for ep93xx.
+ *
+ * Written by Christopher Hoover <ch@hpl.hp.com>
+ * Based on fragments of previous driver by Russell King et al.
+ *
+ * Modified for LH7A404 from ohci-sa1111.c
+ *  by Durgesh Pattamatta <pattamattad@sharpsec.com>
+ *
+ * Modified for pxa27x from ohci-lh7a404.c
+ *  by Nick Bane <nick@cecomputing.co.uk> 26-8-2004
+ *
+ * Modified for ep93xx from ohci-pxa27x.c
+ *  by Lennert Buytenhek <buytenh@wantstofly.org> 28-2-2006
+ *  Based on an earlier driver by Ray Lehtiniemi
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/signal.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+
+static struct clk *usb_host_clock;
+
+static void ep93xx_start_hc(struct device *dev)
+{
+	clk_enable(usb_host_clock);
+}
+
+static void ep93xx_stop_hc(struct device *dev)
+{
+	clk_disable(usb_host_clock);
+}
+
+static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
+			 struct platform_device *pdev)
+{
+	int retval;
+	struct usb_hcd *hcd;
+
+	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
+		pr_debug("resource[1] is not IORESOURCE_IRQ");
+		return -ENOMEM;
+	}
+
+	hcd = usb_create_hcd(driver, &pdev->dev, "ep93xx");
+	if (hcd == NULL)
+		return -ENOMEM;
+
+	hcd->rsrc_start = pdev->resource[0].start;
+	hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+		usb_put_hcd(hcd);
+		retval = -EBUSY;
+		goto err1;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (hcd->regs == NULL) {
+		pr_debug("ioremap failed");
+		retval = -ENOMEM;
+		goto err2;
+	}
+
+	usb_host_clock = clk_get(&pdev->dev, "usb_host");
+	ep93xx_start_hc(&pdev->dev);
+
+	ohci_hcd_init(hcd_to_ohci(hcd));
+
+	retval = usb_add_hcd(hcd, pdev->resource[1].start, SA_INTERRUPT);
+	if (retval == 0)
+		return retval;
+
+	ep93xx_stop_hc(&pdev->dev);
+	iounmap(hcd->regs);
+err2:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+	usb_put_hcd(hcd);
+
+	return retval;
+}
+
+static void usb_hcd_ep93xx_remove(struct usb_hcd *hcd,
+			struct platform_device *pdev)
+{
+	usb_remove_hcd(hcd);
+	ep93xx_stop_hc(&pdev->dev);
+	clk_put(usb_host_clock);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+}
+
+static int __devinit ohci_ep93xx_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	int ret;
+
+	if ((ret = ohci_init(ohci)) < 0)
+		return ret;
+
+	if ((ret = ohci_run(ohci)) < 0) {
+		err("can't start %s", hcd->self.bus_name);
+		ohci_stop(hcd);
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct hc_driver ohci_ep93xx_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "EP93xx OHCI",
+	.hcd_priv_size		= sizeof(struct ohci_hcd),
+	.irq			= ohci_irq,
+	.flags			= HCD_USB11 | HCD_MEMORY,
+	.start			= ohci_ep93xx_start,
+	.stop			= ohci_stop,
+	.urb_enqueue		= ohci_urb_enqueue,
+	.urb_dequeue		= ohci_urb_dequeue,
+	.endpoint_disable	= ohci_endpoint_disable,
+	.get_frame_number	= ohci_get_frame,
+	.hub_status_data	= ohci_hub_status_data,
+	.hub_control		= ohci_hub_control,
+#ifdef CONFIG_PM
+	.bus_suspend		= ohci_bus_suspend,
+	.bus_resume		= ohci_bus_resume,
+#endif
+	.start_port_reset	= ohci_start_port_reset,
+};
+
+extern int usb_disabled(void);
+
+static int ohci_hcd_ep93xx_drv_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = -ENODEV;
+	if (!usb_disabled())
+		ret = usb_hcd_ep93xx_probe(&ohci_ep93xx_hc_driver, pdev);
+
+	return ret;
+}
+
+static int ohci_hcd_ep93xx_drv_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_hcd_ep93xx_remove(hcd, pdev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ohci_hcd_ep93xx_drv_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct ochi_hcd *ohci = hcd_to_ohci(hcd);
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	ep93xx_stop_hc(&pdev->dev);
+	hcd->state = HC_STATE_SUSPENDED;
+	pdev->dev.power.power_state = PMSG_SUSPEND;
+
+	return 0;
+}
+
+static int ohci_hcd_ep93xx_drv_resume(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	int status;
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	ep93xx_start_hc(&pdev->dev);
+	pdev->dev.power.power_state = PMSG_ON;
+	usb_hcd_resume_root_hub(hcd);
+
+	return 0;
+}
+#endif
+
+
+static struct platform_driver ohci_hcd_ep93xx_driver = {
+	.probe		= ohci_hcd_ep93xx_drv_probe,
+	.remove		= ohci_hcd_ep93xx_drv_remove,
+#ifdef CONFIG_PM
+	.suspend	= ohci_hcd_ep93xx_drv_suspend,
+	.resume		= ohci_hcd_ep93xx_drv_resume,
+#endif
+	.driver		= {
+		.name	= "ep93xx-ohci",
+	},
+};
+
+static int __init ohci_hcd_ep93xx_init(void)
+{
+	return platform_driver_register(&ohci_hcd_ep93xx_driver);
+}
+
+static void __exit ohci_hcd_ep93xx_cleanup(void)
+{
+	platform_driver_unregister(&ohci_hcd_ep93xx_driver);
+}
+
+module_init(ohci_hcd_ep93xx_init);
+module_exit(ohci_hcd_ep93xx_cleanup);
diff -urN linux-2.6.18-rc1/drivers/usb/host/ohci-hcd.c linux-2.6.18-rc2/drivers/usb/host/ohci-hcd.c
--- linux-2.6.18-rc1/drivers/usb/host/ohci-hcd.c	2006-07-15 22:34:43.121056503 +0000
+++ linux-2.6.18-rc2/drivers/usb/host/ohci-hcd.c	2006-07-15 22:34:48.401629700 +0000
@@ -901,6 +901,10 @@
 #include "ohci-pxa27x.c"
 #endif
 
+#ifdef CONFIG_ARCH_EP93XX
+#include "ohci-ep93xx.c"
+#endif
+
 #ifdef CONFIG_SOC_AU1X00
 #include "ohci-au1xxx.c"
 #endif
@@ -919,6 +923,7 @@
       || defined(CONFIG_ARCH_OMAP) \
       || defined (CONFIG_ARCH_LH7A404) \
       || defined (CONFIG_PXA27x) \
+      || defined (CONFIG_ARCH_EP93XX) \
       || defined (CONFIG_SOC_AU1X00) \
       || defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
       || defined (CONFIG_ARCH_AT91RM9200) \
diff -urN linux-2.6.18-rc1/drivers/usb/host/ohci-hub.c linux-2.6.18-rc2/drivers/usb/host/ohci-hub.c
--- linux-2.6.18-rc1/drivers/usb/host/ohci-hub.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/usb/host/ohci-hub.c	2006-07-15 22:34:48.401629700 +0000
@@ -581,14 +581,14 @@
 		break;
 	case GetHubStatus:
 		temp = roothub_status (ohci) & ~(RH_HS_CRWE | RH_HS_DRWE);
-		*(__le32 *) buf = cpu_to_le32 (temp);
+		put_unaligned(cpu_to_le32 (temp), (__le32 *) buf);
 		break;
 	case GetPortStatus:
 		if (!wIndex || wIndex > ports)
 			goto error;
 		wIndex--;
 		temp = roothub_portstatus (ohci, wIndex);
-		*(__le32 *) buf = cpu_to_le32 (temp);
+		put_unaligned(cpu_to_le32 (temp), (__le32 *) buf);
 
 #ifndef	OHCI_VERBOSE_DEBUG
 	if (*(u16*)(buf+2))	/* only if wPortChange is interesting */
diff -urN linux-2.6.18-rc1/drivers/usb/host/pci-quirks.c linux-2.6.18-rc2/drivers/usb/host/pci-quirks.c
--- linux-2.6.18-rc1/drivers/usb/host/pci-quirks.c	2006-07-15 22:34:43.121056503 +0000
+++ linux-2.6.18-rc2/drivers/usb/host/pci-quirks.c	2006-07-15 22:34:48.405630134 +0000
@@ -167,8 +167,6 @@
 static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
 {
 	void __iomem *base;
-	int wait_time;
-	u32 control;
 
 	if (!mmio_resource_enabled(pdev, 0))
 		return;
@@ -179,9 +177,10 @@
 
 /* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
 #ifndef __hppa__
-	control = readl(base + OHCI_CONTROL);
+{
+	u32 control = readl(base + OHCI_CONTROL);
 	if (control & OHCI_CTRL_IR) {
-		wait_time = 500; /* arbitrary; 5 seconds */
+		int wait_time = 500; /* arbitrary; 5 seconds */
 		writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
 		writel(OHCI_OCR, base + OHCI_CMDSTATUS);
 		while (wait_time > 0 &&
@@ -198,6 +197,7 @@
 		/* reset controller, preserving RWC */
 		writel(control & OHCI_CTRL_RWC, base + OHCI_CONTROL);
 	}
+}
 #endif
 
 	/*
diff -urN linux-2.6.18-rc1/drivers/usb/input/hid-core.c linux-2.6.18-rc2/drivers/usb/input/hid-core.c
--- linux-2.6.18-rc1/drivers/usb/input/hid-core.c	2006-07-15 22:34:43.129057372 +0000
+++ linux-2.6.18-rc2/drivers/usb/input/hid-core.c	2006-07-15 22:34:48.409630568 +0000
@@ -1507,6 +1507,9 @@
 #define USB_DEVICE_ID_4_PHIDGETSERVO_20	0x8104
 #define USB_DEVICE_ID_DUAL_USB_JOYPAD   0x8866
 
+#define USB_VENDOR_ID_WISEGROUP_LTD	0x6677
+#define USB_DEVICE_ID_SMARTJOY_DUAL_PLUS 0x8802
+
 #define USB_VENDOR_ID_CODEMERCS		0x07c0
 #define USB_DEVICE_ID_CODEMERCS_IOW40	0x1500
 #define USB_DEVICE_ID_CODEMERCS_IOW24	0x1501
@@ -1670,6 +1673,7 @@
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
+	{ USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SMARTJOY_DUAL_PLUS, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
 
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE, HID_QUIRK_MIGHTYMOUSE | HID_QUIRK_INVERT_HWHEEL },
 	{ USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU, HID_QUIRK_2WHEEL_MOUSE_HACK_7 },
diff -urN linux-2.6.18-rc1/drivers/usb/misc/Kconfig linux-2.6.18-rc2/drivers/usb/misc/Kconfig
--- linux-2.6.18-rc1/drivers/usb/misc/Kconfig	2006-07-15 22:34:43.137058240 +0000
+++ linux-2.6.18-rc2/drivers/usb/misc/Kconfig	2006-07-15 22:34:48.413631003 +0000
@@ -88,19 +88,19 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called usbled.
 
-config USB_CY7C63
+config USB_CYPRESS_CY7C63
 	tristate "Cypress CY7C63xxx USB driver support"
 	depends on USB
 	help
 	  Say Y here if you want to connect a Cypress CY7C63xxx
-	  micro controller to your computer's USB port. This driver
-	  supports the pre-programmed devices (incl. firmware) by
-	  AK Modul-Bus Computer GmbH.
+	  micro controller to your computer's USB port. Currently this
+	  driver supports the pre-programmed devices (incl. firmware)
+	  by AK Modul-Bus Computer GmbH.
 
 	  Please see: http://www.ak-modul-bus.de/stat/mikrocontroller.html
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called cy7c63.
+	  module will be called cypress_cy7c63.
 
 config USB_CYTHERM
 	tristate "Cypress USB thermometer driver support"
diff -urN linux-2.6.18-rc1/drivers/usb/misc/Makefile linux-2.6.18-rc2/drivers/usb/misc/Makefile
--- linux-2.6.18-rc1/drivers/usb/misc/Makefile	2006-07-15 22:34:43.137058240 +0000
+++ linux-2.6.18-rc2/drivers/usb/misc/Makefile	2006-07-15 22:34:48.413631003 +0000
@@ -4,7 +4,7 @@
 #
 
 obj-$(CONFIG_USB_AUERSWALD)	+= auerswald.o
-obj-$(CONFIG_USB_CY7C63)	+= cy7c63.o
+obj-$(CONFIG_USB_CYPRESS_CY7C63)+= cypress_cy7c63.o
 obj-$(CONFIG_USB_CYTHERM)	+= cytherm.o
 obj-$(CONFIG_USB_EMI26)		+= emi26.o
 obj-$(CONFIG_USB_EMI62)		+= emi62.o
diff -urN linux-2.6.18-rc1/drivers/usb/misc/cy7c63.c linux-2.6.18-rc2/drivers/usb/misc/cy7c63.c
--- linux-2.6.18-rc1/drivers/usb/misc/cy7c63.c	2006-07-15 22:34:43.137058240 +0000
+++ linux-2.6.18-rc2/drivers/usb/misc/cy7c63.c	1970-01-01 00:00:00.000000000 +0000
@@ -1,244 +0,0 @@
-/*
-* cy7c63.c
-*
-* Copyright (c) 2006 Oliver Bock (bock@fh-wolfenbuettel.de)
-*
-*	This driver is based on the Cypress Thermometer USB Driver by
-*	Marcus Maul and the 2.0 version of Greg Kroah-Hartman's
-*	USB Skeleton driver.
-*
-*	Is is a generic driver for the Cypress CY7C63000 family.
-*	For the time being it enables you to toggle the single I/O ports
-*	of the device.
-*
-*	Supported vendors:	AK Modul-Bus Computer GmbH
-*	Supported devices:	CY7C63001A-PC (to be continued...)
-*	Supported functions:	Read/Write Ports (to be continued...)
-*
-*	Chipsets families:	CY7C63000, CY7C63001, CY7C63100, CY7C63101
-*
-*
-*	This program is free software; you can redistribute it and/or
-*	modify it under the terms of the GNU General Public License as
-*	published by the Free Software Foundation, version 2.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/usb.h>
-
-#define DRIVER_AUTHOR		"Oliver Bock (bock@fh-wolfenbuettel.de)"
-#define DRIVER_DESC		"Cypress CY7C63xxx USB driver"
-
-#define CY7C63_VENDOR_ID	0xa2c
-#define CY7C63_PRODUCT_ID	0x8
-
-#define CY7C63_READ_PORT	0x4
-#define CY7C63_WRITE_PORT	0x5
-#define CY7C63_READ_RAM		0x2
-#define CY7C63_WRITE_RAM	0x3
-#define CY7C63_READ_ROM		0x1
-
-#define CY7C63_READ_PORT_ID0	0
-#define CY7C63_WRITE_PORT_ID0	0
-#define CY7C63_READ_PORT_ID1	0x2
-#define CY7C63_WRITE_PORT_ID1	1
-
-#define CY7C63_MAX_REQSIZE	8
-
-
-/* table of devices that work with this driver */
-static struct usb_device_id cy7c63_table [] = {
-	{ USB_DEVICE(CY7C63_VENDOR_ID, CY7C63_PRODUCT_ID) },
-	{ }
-};
-MODULE_DEVICE_TABLE(usb, cy7c63_table);
-
-/* structure to hold all of our device specific stuff */
-struct cy7c63 {
-	struct usb_device *	udev;
-	char 			port0;
-	char			port1;
-};
-
-/* used to send usb control messages to device */
-int vendor_command(struct cy7c63 *dev, unsigned char request,
-			 unsigned char address, unsigned char data) {
-
-	int retval = 0;
-	unsigned int pipe;
-	unsigned char *iobuf;
-
-	/* allocate some memory for the i/o buffer*/
-	iobuf = kzalloc(CY7C63_MAX_REQSIZE, GFP_KERNEL);
-	if (!iobuf) {
-		dev_err(&dev->udev->dev, "Out of memory!\n");
-		retval = -ENOMEM;
-		goto error;
-	}
-
-	dev_dbg(&dev->udev->dev, "Sending usb_control_msg (data: %d)\n", data);
-
-	/* prepare usb control message and send it upstream */
-	pipe = usb_rcvctrlpipe(dev->udev, 0);
-	retval = usb_control_msg(dev->udev, pipe, request,
-				USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
-				address, data, iobuf, CY7C63_MAX_REQSIZE,
-				USB_CTRL_GET_TIMEOUT);
-
-	/* store returned data (more READs to be added!) */
-	switch (request) {
-		case CY7C63_READ_PORT:
-			if (address == CY7C63_READ_PORT_ID0) {
-				dev->port0 = iobuf[1];
-				dev_dbg(&dev->udev->dev,
-					"READ_PORT0 returned: %d\n",dev->port0);
-			}
-			else if (address == CY7C63_READ_PORT_ID1) {
-				dev->port1 = iobuf[1];
-				dev_dbg(&dev->udev->dev,
-					"READ_PORT1 returned: %d\n",dev->port1);
-			}
-			break;
-	}
-
-	kfree(iobuf);
-error:
-	return retval;
-}
-
-#define get_set_port(num,read_id,write_id) \
-static ssize_t set_port##num(struct device *dev, struct device_attribute *attr,	\
-					const char *buf, size_t count) {	\
-										\
-	int value;								\
-	int result = 0;								\
-										\
-	struct usb_interface *intf = to_usb_interface(dev);			\
-	struct cy7c63 *cyp = usb_get_intfdata(intf);				\
-										\
-	dev_dbg(&cyp->udev->dev, "WRITE_PORT%d called\n", num);			\
-										\
-	/* validate input data */						\
-	if (sscanf(buf, "%d", &value) < 1) {					\
-		result = -EINVAL;						\
-		goto error;							\
-	}									\
-	if (value>255 || value<0) {						\
-		result = -EINVAL;						\
-		goto error;							\
-	}									\
-										\
-	result = vendor_command(cyp, CY7C63_WRITE_PORT, write_id,		\
-					 (unsigned char)value);			\
-										\
-	dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n",result);	\
-error:										\
-	return result < 0 ? result : count;					\
-}										\
-										\
-static ssize_t get_port##num(struct device *dev,				\
-				 struct device_attribute *attr, char *buf) {	\
-										\
-	int result = 0;								\
-										\
-	struct usb_interface *intf = to_usb_interface(dev);			\
-	struct cy7c63 *cyp = usb_get_intfdata(intf);				\
-										\
-	dev_dbg(&cyp->udev->dev, "READ_PORT%d called\n", num);			\
-										\
-	result = vendor_command(cyp, CY7C63_READ_PORT, read_id, 0);		\
-										\
-	dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result);	\
-										\
-	return sprintf(buf, "%d", cyp->port##num);				\
-}										\
-static DEVICE_ATTR(port##num, S_IWUGO | S_IRUGO, get_port##num, set_port##num);
-
-get_set_port(0, CY7C63_READ_PORT_ID0, CY7C63_WRITE_PORT_ID0);
-get_set_port(1, CY7C63_READ_PORT_ID1, CY7C63_WRITE_PORT_ID1);
-
-static int cy7c63_probe(struct usb_interface *interface,
-			const struct usb_device_id *id) {
-
-	struct cy7c63 *dev = NULL;
-	int retval = -ENOMEM;
-
-	/* allocate memory for our device state and initialize it */
-	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-	if (dev == NULL) {
-		dev_err(&dev->udev->dev, "Out of memory!\n");
-		goto error;
-	}
-
-	dev->udev = usb_get_dev(interface_to_usbdev(interface));
-
-	/* save our data pointer in this interface device */
-	usb_set_intfdata(interface, dev);
-
-	/* create device attribute files */
-	device_create_file(&interface->dev, &dev_attr_port0);
-	device_create_file(&interface->dev, &dev_attr_port1);
-
-	/* let the user know what node this device is now attached to */
-	dev_info(&interface->dev,
-		"Cypress CY7C63xxx device now attached\n");
-
-	retval = 0;
-error:
-	return retval;
-}
-
-static void cy7c63_disconnect(struct usb_interface *interface) {
-
-	struct cy7c63 *dev;
-
-	dev = usb_get_intfdata(interface);
-	usb_set_intfdata(interface, NULL);
-
-	/* remove device attribute files */
-	device_remove_file(&interface->dev, &dev_attr_port0);
-	device_remove_file(&interface->dev, &dev_attr_port1);
-
-	usb_put_dev(dev->udev);
-
-	dev_info(&interface->dev,
-		"Cypress CY7C63xxx device now disconnected\n");
-
-	kfree(dev);
-}
-
-static struct usb_driver cy7c63_driver = {
-	.name = "cy7c63",
-	.probe = cy7c63_probe,
-	.disconnect = cy7c63_disconnect,
-	.id_table = cy7c63_table,
-};
-
-static int __init cy7c63_init(void) {
-
-	int result;
-
-	/* register this driver with the USB subsystem */
-	result = usb_register(&cy7c63_driver);
-	if (result) {
-		err("Function usb_register failed! Error number: %d\n", result);
-	}
-
-	return result;
-}
-
-static void __exit cy7c63_exit(void) {
-
-	/* deregister this driver with the USB subsystem */
-	usb_deregister(&cy7c63_driver);
-}
-
-module_init(cy7c63_init);
-module_exit(cy7c63_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-
-MODULE_LICENSE("GPL");
diff -urN linux-2.6.18-rc1/drivers/usb/misc/cypress_cy7c63.c linux-2.6.18-rc2/drivers/usb/misc/cypress_cy7c63.c
--- linux-2.6.18-rc1/drivers/usb/misc/cypress_cy7c63.c	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/drivers/usb/misc/cypress_cy7c63.c	2006-07-15 22:34:48.417631437 +0000
@@ -0,0 +1,279 @@
+/*
+* cypress_cy7c63.c
+*
+* Copyright (c) 2006 Oliver Bock (o.bock@fh-wolfenbuettel.de)
+*
+*	This driver is based on the Cypress USB Driver by Marcus Maul
+*	(cyport) and the 2.0 version of Greg Kroah-Hartman's
+*	USB Skeleton driver.
+*
+*	This is a generic driver for the Cypress CY7C63xxx family.
+*	For the time being it enables you to read from and write to
+*	the single I/O ports of the device.
+*
+*	Supported vendors:	AK Modul-Bus Computer GmbH
+*	Supported devices:	CY7C63001A-PC (to be continued...)
+*	Supported functions:	Read/Write Ports (to be continued...)
+*
+*
+*	This program is free software; you can redistribute it and/or
+*	modify it under the terms of the GNU General Public License as
+*	published by the Free Software Foundation, version 2.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/usb.h>
+
+#define DRIVER_AUTHOR		"Oliver Bock (o.bock@fh-wolfenbuettel.de)"
+#define DRIVER_DESC		"Cypress CY7C63xxx USB driver"
+
+#define CYPRESS_VENDOR_ID	0xa2c
+#define CYPRESS_PRODUCT_ID	0x8
+
+#define CYPRESS_READ_PORT	0x4
+#define CYPRESS_WRITE_PORT	0x5
+
+#define CYPRESS_READ_RAM	0x2
+#define CYPRESS_WRITE_RAM	0x3
+#define CYPRESS_READ_ROM	0x1
+
+#define CYPRESS_READ_PORT_ID0	0
+#define CYPRESS_WRITE_PORT_ID0	0
+#define CYPRESS_READ_PORT_ID1	0x2
+#define CYPRESS_WRITE_PORT_ID1	1
+
+#define CYPRESS_MAX_REQSIZE	8
+
+
+/* table of devices that work with this driver */
+static struct usb_device_id cypress_table [] = {
+	{ USB_DEVICE(CYPRESS_VENDOR_ID, CYPRESS_PRODUCT_ID) },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, cypress_table);
+
+/* structure to hold all of our device specific stuff */
+struct cypress {
+	struct usb_device *	udev;
+	unsigned char		port[2];
+};
+
+/* used to send usb control messages to device */
+static int vendor_command(struct cypress *dev, unsigned char request,
+			  unsigned char address, unsigned char data)
+{
+	int retval = 0;
+	unsigned int pipe;
+	unsigned char *iobuf;
+
+	/* allocate some memory for the i/o buffer*/
+	iobuf = kzalloc(CYPRESS_MAX_REQSIZE, GFP_KERNEL);
+	if (!iobuf) {
+		dev_err(&dev->udev->dev, "Out of memory!\n");
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	dev_dbg(&dev->udev->dev, "Sending usb_control_msg (data: %d)\n", data);
+
+	/* prepare usb control message and send it upstream */
+	pipe = usb_rcvctrlpipe(dev->udev, 0);
+	retval = usb_control_msg(dev->udev, pipe, request,
+				 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
+				 address, data, iobuf, CYPRESS_MAX_REQSIZE,
+				 USB_CTRL_GET_TIMEOUT);
+
+	/* store returned data (more READs to be added) */
+	switch (request) {
+		case CYPRESS_READ_PORT:
+			if (address == CYPRESS_READ_PORT_ID0) {
+				dev->port[0] = iobuf[1];
+				dev_dbg(&dev->udev->dev,
+					"READ_PORT0 returned: %d\n",
+					dev->port[0]);
+			}
+			else if (address == CYPRESS_READ_PORT_ID1) {
+				dev->port[1] = iobuf[1];
+				dev_dbg(&dev->udev->dev,
+					"READ_PORT1 returned: %d\n",
+					dev->port[1]);
+			}
+			break;
+	}
+
+	kfree(iobuf);
+error:
+	return retval;
+}
+
+/* write port value */
+static ssize_t write_port(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count,
+			  int port_num, int write_id)
+{
+	int value = -1;
+	int result = 0;
+
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct cypress *cyp = usb_get_intfdata(intf);
+
+	dev_dbg(&cyp->udev->dev, "WRITE_PORT%d called\n", port_num);
+
+	/* validate input data */
+	if (sscanf(buf, "%d", &value) < 1) {
+		result = -EINVAL;
+		goto error;
+	}
+	if (value < 0 || value > 255) {
+		result = -EINVAL;
+		goto error;
+	}
+
+	result = vendor_command(cyp, CYPRESS_WRITE_PORT, write_id,
+				(unsigned char)value);
+
+	dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result);
+error:
+	return result < 0 ? result : count;
+}
+
+/* attribute callback handler (write) */
+static ssize_t set_port0_handler(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	return write_port(dev, attr, buf, count, 0, CYPRESS_WRITE_PORT_ID0);
+}
+
+/* attribute callback handler (write) */
+static ssize_t set_port1_handler(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	return write_port(dev, attr, buf, count, 1, CYPRESS_WRITE_PORT_ID1);
+}
+
+/* read port value */
+static ssize_t read_port(struct device *dev, struct device_attribute *attr,
+			 char *buf, int port_num, int read_id)
+{
+	int result = 0;
+
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct cypress *cyp = usb_get_intfdata(intf);
+
+	dev_dbg(&cyp->udev->dev, "READ_PORT%d called\n", port_num);
+
+	result = vendor_command(cyp, CYPRESS_READ_PORT, read_id, 0);
+
+	dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result);
+
+	return sprintf(buf, "%d", cyp->port[port_num]);
+}
+
+/* attribute callback handler (read) */
+static ssize_t get_port0_handler(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	return read_port(dev, attr, buf, 0, CYPRESS_READ_PORT_ID0);
+}
+
+/* attribute callback handler (read) */
+static ssize_t get_port1_handler(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	return read_port(dev, attr, buf, 1, CYPRESS_READ_PORT_ID1);
+}
+
+static DEVICE_ATTR(port0, S_IWUGO | S_IRUGO,
+		   get_port0_handler, set_port0_handler);
+
+static DEVICE_ATTR(port1, S_IWUGO | S_IRUGO,
+		   get_port1_handler, set_port1_handler);
+
+
+static int cypress_probe(struct usb_interface *interface,
+			 const struct usb_device_id *id)
+{
+	struct cypress *dev = NULL;
+	int retval = -ENOMEM;
+
+	/* allocate memory for our device state and initialize it */
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (dev == NULL) {
+		dev_err(&dev->udev->dev, "Out of memory!\n");
+		goto error;
+	}
+
+	dev->udev = usb_get_dev(interface_to_usbdev(interface));
+
+	/* save our data pointer in this interface device */
+	usb_set_intfdata(interface, dev);
+
+	/* create device attribute files */
+	device_create_file(&interface->dev, &dev_attr_port0);
+	device_create_file(&interface->dev, &dev_attr_port1);
+
+	/* let the user know that the device is now attached */
+	dev_info(&interface->dev,
+		 "Cypress CY7C63xxx device now attached\n");
+
+	retval = 0;
+error:
+	return retval;
+}
+
+static void cypress_disconnect(struct usb_interface *interface)
+{
+	struct cypress *dev;
+
+	dev = usb_get_intfdata(interface);
+	usb_set_intfdata(interface, NULL);
+
+	/* remove device attribute files */
+	device_remove_file(&interface->dev, &dev_attr_port0);
+	device_remove_file(&interface->dev, &dev_attr_port1);
+
+	usb_put_dev(dev->udev);
+
+	dev_info(&interface->dev,
+		 "Cypress CY7C63xxx device now disconnected\n");
+
+	kfree(dev);
+}
+
+static struct usb_driver cypress_driver = {
+	.name = "cypress_cy7c63",
+	.probe = cypress_probe,
+	.disconnect = cypress_disconnect,
+	.id_table = cypress_table,
+};
+
+static int __init cypress_init(void)
+{
+	int result;
+
+	/* register this driver with the USB subsystem */
+	result = usb_register(&cypress_driver);
+	if (result) {
+		err("Function usb_register failed! Error number: %d\n", result);
+	}
+
+	return result;
+}
+
+static void __exit cypress_exit(void)
+{
+	/* deregister this driver with the USB subsystem */
+	usb_deregister(&cypress_driver);
+}
+
+module_init(cypress_init);
+module_exit(cypress_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+
+MODULE_LICENSE("GPL");
diff -urN linux-2.6.18-rc1/drivers/usb/misc/usblcd.c linux-2.6.18-rc2/drivers/usb/misc/usblcd.c
--- linux-2.6.18-rc1/drivers/usb/misc/usblcd.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/usb/misc/usblcd.c	2006-07-15 22:34:48.421631871 +0000
@@ -200,10 +200,8 @@
 
 	/* create a urb, and a buffer for it, and copy the data to the urb */
 	urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!urb) {
-		retval = -ENOMEM;
-		goto error;
-	}
+	if (!urb)
+		return -ENOMEM;
 	
 	buf = usb_buffer_alloc(dev->udev, count, GFP_KERNEL, &urb->transfer_dma);
 	if (!buf) {
diff -urN linux-2.6.18-rc1/drivers/usb/mon/mon_text.c linux-2.6.18-rc2/drivers/usb/mon/mon_text.c
--- linux-2.6.18-rc1/drivers/usb/mon/mon_text.c	2006-07-15 22:34:43.145059109 +0000
+++ linux-2.6.18-rc2/drivers/usb/mon/mon_text.c	2006-07-15 22:34:48.425632305 +0000
@@ -64,7 +64,6 @@
 };
 
 static void mon_text_ctor(void *, kmem_cache_t *, unsigned long);
-static void mon_text_dtor(void *, kmem_cache_t *, unsigned long);
 
 /*
  * mon_text_submit
@@ -268,7 +267,7 @@
 	    (long)rp);
 	rp->e_slab = kmem_cache_create(rp->slab_name,
 	    sizeof(struct mon_event_text), sizeof(long), 0,
-	    mon_text_ctor, mon_text_dtor);
+	    mon_text_ctor, NULL);
 	if (rp->e_slab == NULL) {
 		rc = -ENOMEM;
 		goto err_slab;
@@ -459,7 +458,3 @@
 	memset(mem, 0xe5, sizeof(struct mon_event_text));
 }
 
-static void mon_text_dtor(void *mem, kmem_cache_t *slab, unsigned long sflags)
-{
-	;
-}
diff -urN linux-2.6.18-rc1/drivers/usb/net/rtl8150.c linux-2.6.18-rc2/drivers/usb/net/rtl8150.c
--- linux-2.6.18-rc1/drivers/usb/net/rtl8150.c	2006-07-15 22:34:43.149059543 +0000
+++ linux-2.6.18-rc2/drivers/usb/net/rtl8150.c	2006-07-15 22:34:48.425632305 +0000
@@ -128,11 +128,13 @@
 #define	VENDOR_ID_MELCO			0x0411
 #define VENDOR_ID_MICRONET		0x3980
 #define	VENDOR_ID_LONGSHINE		0x07b8
+#define	VENDOR_ID_ZYXEL			0x0586
 
 #define PRODUCT_ID_RTL8150		0x8150
 #define	PRODUCT_ID_LUAKTX		0x0012
 #define	PRODUCT_ID_LCS8138TX		0x401a
 #define PRODUCT_ID_SP128AR		0x0003
+#define	PRODUCT_ID_PRESTIGE		0x401a
 
 #undef	EEPROM_WRITE
 
@@ -142,6 +144,7 @@
 	{USB_DEVICE(VENDOR_ID_MELCO, PRODUCT_ID_LUAKTX)},
 	{USB_DEVICE(VENDOR_ID_MICRONET, PRODUCT_ID_SP128AR)},
 	{USB_DEVICE(VENDOR_ID_LONGSHINE, PRODUCT_ID_LCS8138TX)},
+	{USB_DEVICE(VENDOR_ID_ZYXEL, PRODUCT_ID_PRESTIGE)},
 	{}
 };
 
diff -urN linux-2.6.18-rc1/drivers/usb/serial/Kconfig linux-2.6.18-rc2/drivers/usb/serial/Kconfig
--- linux-2.6.18-rc1/drivers/usb/serial/Kconfig	2006-07-15 22:34:43.153059977 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/Kconfig	2006-07-15 22:34:48.429632740 +0000
@@ -456,6 +456,17 @@
 	bool "USB Secure Encapsulated Driver - Padded"
 	depends on USB_SERIAL_SAFE
 
+config USB_SERIAL_SIERRAWIRELESS
+	tristate "USB Sierra Wireless Driver"
+	depends on USB_SERIAL
+	help
+	  Say M here if you want to use a Sierra Wireless device (if
+	  using an PC 5220 or AC580 please use the Airprime driver
+	  instead).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sierra.
+
 config USB_SERIAL_TI
 	tristate "USB TI 3410/5052 Serial Driver"
 	depends on USB_SERIAL
diff -urN linux-2.6.18-rc1/drivers/usb/serial/Makefile linux-2.6.18-rc2/drivers/usb/serial/Makefile
--- linux-2.6.18-rc1/drivers/usb/serial/Makefile	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/Makefile	2006-07-15 22:34:48.429632740 +0000
@@ -39,6 +39,7 @@
 obj-$(CONFIG_USB_SERIAL_OPTION)			+= option.o
 obj-$(CONFIG_USB_SERIAL_PL2303)			+= pl2303.o
 obj-$(CONFIG_USB_SERIAL_SAFE)			+= safe_serial.o
+obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS)		+= sierra.o
 obj-$(CONFIG_USB_SERIAL_TI)			+= ti_usb_3410_5052.o
 obj-$(CONFIG_USB_SERIAL_VISOR)			+= visor.o
 obj-$(CONFIG_USB_SERIAL_WHITEHEAT)		+= whiteheat.o
diff -urN linux-2.6.18-rc1/drivers/usb/serial/airprime.c linux-2.6.18-rc2/drivers/usb/serial/airprime.c
--- linux-2.6.18-rc1/drivers/usb/serial/airprime.c	2006-07-15 22:34:43.153059977 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/airprime.c	2006-07-15 22:34:48.429632740 +0000
@@ -13,7 +13,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */
diff -urN linux-2.6.18-rc1/drivers/usb/serial/anydata.c linux-2.6.18-rc2/drivers/usb/serial/anydata.c
--- linux-2.6.18-rc1/drivers/usb/serial/anydata.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/anydata.c	2006-07-15 22:34:48.429632740 +0000
@@ -13,7 +13,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x16d5, 0x6501) },	/* AirData CDMA device */
@@ -71,7 +71,7 @@
 				  	  port->bulk_in_endpointAddress),
 			  port->read_urb->transfer_buffer,
 			  port->read_urb->transfer_buffer_length,
-			  usb_serial_generic_write_bulk_callback, port);
+			  usb_serial_generic_read_bulk_callback, port);
 	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (result)
 		dev_err(&port->dev,
diff -urN linux-2.6.18-rc1/drivers/usb/serial/ark3116.c linux-2.6.18-rc2/drivers/usb/serial/ark3116.c
--- linux-2.6.18-rc1/drivers/usb/serial/ark3116.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/ark3116.c	2006-07-15 22:34:48.429632740 +0000
@@ -21,7 +21,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 
 static int debug;
diff -urN linux-2.6.18-rc1/drivers/usb/serial/belkin_sa.c linux-2.6.18-rc2/drivers/usb/serial/belkin_sa.c
--- linux-2.6.18-rc1/drivers/usb/serial/belkin_sa.c	2006-07-15 22:34:43.153059977 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/belkin_sa.c	2006-07-15 22:34:48.433633174 +0000
@@ -74,7 +74,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "belkin_sa.h"
 
 static int debug;
diff -urN linux-2.6.18-rc1/drivers/usb/serial/bus.c linux-2.6.18-rc2/drivers/usb/serial/bus.c
--- linux-2.6.18-rc1/drivers/usb/serial/bus.c	2006-07-15 22:34:43.153059977 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/bus.c	2006-07-15 22:34:48.433633174 +0000
@@ -13,7 +13,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static int usb_serial_device_match (struct device *dev, struct device_driver *drv)
 {
diff -urN linux-2.6.18-rc1/drivers/usb/serial/console.c linux-2.6.18-rc2/drivers/usb/serial/console.c
--- linux-2.6.18-rc1/drivers/usb/serial/console.c	2006-07-15 22:34:43.153059977 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/console.c	2006-07-15 22:34:48.433633174 +0000
@@ -17,11 +17,10 @@
 #include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 
 static int debug;
 
-#include "usb-serial.h"
-
 struct usbcons_info {
 	int			magic;
 	int			break_flag;
diff -urN linux-2.6.18-rc1/drivers/usb/serial/cp2101.c linux-2.6.18-rc2/drivers/usb/serial/cp2101.c
--- linux-2.6.18-rc1/drivers/usb/serial/cp2101.c	2006-07-15 22:34:43.153059977 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/cp2101.c	2006-07-15 22:34:48.433633174 +0000
@@ -26,7 +26,7 @@
 #include <linux/moduleparam.h>
 #include <linux/usb.h>
 #include <asm/uaccess.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 /*
  * Version Information
diff -urN linux-2.6.18-rc1/drivers/usb/serial/cyberjack.c linux-2.6.18-rc2/drivers/usb/serial/cyberjack.c
--- linux-2.6.18-rc1/drivers/usb/serial/cyberjack.c	2006-07-15 22:34:43.153059977 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/cyberjack.c	2006-07-15 22:34:48.433633174 +0000
@@ -39,7 +39,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 #define CYBERJACK_LOCAL_BUF_SIZE 32
 
diff -urN linux-2.6.18-rc1/drivers/usb/serial/cypress_m8.c linux-2.6.18-rc2/drivers/usb/serial/cypress_m8.c
--- linux-2.6.18-rc1/drivers/usb/serial/cypress_m8.c	2006-07-15 22:34:43.153059977 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/cypress_m8.c	2006-07-15 22:34:48.433633174 +0000
@@ -59,11 +59,11 @@
 #include <linux/moduleparam.h>
 #include <linux/spinlock.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 #include <linux/serial.h>
 #include <linux/delay.h>
 #include <asm/uaccess.h>
 
-#include "usb-serial.h"
 #include "cypress_m8.h"
 
 
diff -urN linux-2.6.18-rc1/drivers/usb/serial/digi_acceleport.c linux-2.6.18-rc2/drivers/usb/serial/digi_acceleport.c
--- linux-2.6.18-rc1/drivers/usb/serial/digi_acceleport.c	2006-07-15 22:34:43.153059977 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/digi_acceleport.c	2006-07-15 22:34:48.433633174 +0000
@@ -246,7 +246,7 @@
 #include <asm/uaccess.h>
 #include <linux/usb.h>
 #include <linux/wait.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 /* Defines */
 
diff -urN linux-2.6.18-rc1/drivers/usb/serial/empeg.c linux-2.6.18-rc2/drivers/usb/serial/empeg.c
--- linux-2.6.18-rc1/drivers/usb/serial/empeg.c	2006-07-15 22:34:43.153059977 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/empeg.c	2006-07-15 22:34:48.433633174 +0000
@@ -62,7 +62,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static int debug;
 
diff -urN linux-2.6.18-rc1/drivers/usb/serial/ezusb.c linux-2.6.18-rc2/drivers/usb/serial/ezusb.c
--- linux-2.6.18-rc1/drivers/usb/serial/ezusb.c	2006-07-15 22:34:43.153059977 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/ezusb.c	2006-07-15 22:34:48.433633174 +0000
@@ -15,7 +15,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 /* EZ-USB Control and Status Register.  Bit 0 controls 8051 reset */
 #define CPUCS_REG    0x7F92
diff -urN linux-2.6.18-rc1/drivers/usb/serial/ftdi_sio.c linux-2.6.18-rc2/drivers/usb/serial/ftdi_sio.c
--- linux-2.6.18-rc1/drivers/usb/serial/ftdi_sio.c	2006-07-15 22:34:43.153059977 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/ftdi_sio.c	2006-07-15 22:34:48.433633174 +0000
@@ -257,7 +257,7 @@
 #include <asm/uaccess.h>
 #include <linux/usb.h>
 #include <linux/serial.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "ftdi_sio.h"
 
 /*
@@ -313,6 +313,7 @@
 	{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
@@ -500,6 +501,8 @@
 	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
+	{ USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
@@ -548,11 +551,17 @@
 	spinlock_t rx_lock;	/* spinlock for receive state */
 	struct work_struct rx_work;
 	int rx_processed;
+	unsigned long rx_bytes;
 
 	__u16 interface;	/* FT2232C port interface (0 for FT232/245) */
 
 	int force_baud;		/* if non-zero, force the baud rate to this value */
 	int force_rtscts;	/* if non-zero, force RTS-CTS to always be enabled */
+
+	spinlock_t tx_lock;	/* spinlock for transmit state */
+	unsigned long tx_bytes;
+	unsigned long tx_outstanding_bytes;
+	unsigned long tx_outstanding_urbs;
 };
 
 /* Used for TIOCMIWAIT */
@@ -626,6 +635,9 @@
 #define HIGH 1
 #define LOW 0
 
+/* number of outstanding urbs to prevent userspace DoS from happening */
+#define URB_UPPER_LIMIT	42
+
 /*
  * ***************************************************************************
  * Utlity functions
@@ -1156,6 +1168,7 @@
 	}
 
 	spin_lock_init(&priv->rx_lock);
+	spin_lock_init(&priv->tx_lock);
         init_waitqueue_head(&priv->delta_msr_wait);
 	/* This will push the characters through immediately rather
 	   than queue a task to deliver them */
@@ -1270,6 +1283,13 @@
 
 	dbg("%s", __FUNCTION__);
 
+	spin_lock_irqsave(&priv->tx_lock, flags);
+	priv->tx_bytes = 0;
+	spin_unlock_irqrestore(&priv->tx_lock, flags);
+	spin_lock_irqsave(&priv->rx_lock, flags);
+	priv->rx_bytes = 0;
+	spin_unlock_irqrestore(&priv->rx_lock, flags);
+
 	if (port->tty)
 		port->tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
@@ -1372,6 +1392,7 @@
 	int data_offset ;       /* will be 1 for the SIO and 0 otherwise */
 	int status;
 	int transfer_size;
+	unsigned long flags;
 
 	dbg("%s port %d, %d bytes", __FUNCTION__, port->number, count);
 
@@ -1379,6 +1400,13 @@
 		dbg("write request of 0 bytes");
 		return 0;
 	}
+	spin_lock_irqsave(&priv->tx_lock, flags);
+	if (priv->tx_outstanding_urbs > URB_UPPER_LIMIT) {
+		spin_unlock_irqrestore(&priv->tx_lock, flags);
+		dbg("%s - write limit hit\n", __FUNCTION__);
+		return 0;
+	}
+	spin_unlock_irqrestore(&priv->tx_lock, flags);
 	
 	data_offset = priv->write_offset;
         dbg("data_offset set to %d",data_offset);
@@ -1445,6 +1473,12 @@
 		err("%s - failed submitting write urb, error %d", __FUNCTION__, status);
 		count = status;
 		kfree (buffer);
+	} else {
+		spin_lock_irqsave(&priv->tx_lock, flags);
+		++priv->tx_outstanding_urbs;
+		priv->tx_outstanding_bytes += count;
+		priv->tx_bytes += count;
+		spin_unlock_irqrestore(&priv->tx_lock, flags);
 	}
 
 	/* we are done with this urb, so let the host driver
@@ -1460,7 +1494,11 @@
 
 static void ftdi_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
 {
+	unsigned long flags;
 	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
+	struct ftdi_private *priv;
+	int data_offset;       /* will be 1 for the SIO and 0 otherwise */
+	unsigned long countback;
 
 	/* free up the transfer buffer, as usb_free_urb() does not do this */
 	kfree (urb->transfer_buffer);
@@ -1472,34 +1510,67 @@
 		return;
 	}
 
+	priv = usb_get_serial_port_data(port);
+	if (!priv) {
+		dbg("%s - bad port private data pointer - exiting", __FUNCTION__);
+		return;
+	}
+	/* account for transferred data */
+	countback = urb->actual_length;
+	data_offset = priv->write_offset;
+	if (data_offset > 0) {
+		/* Subtract the control bytes */
+		countback -= (data_offset * ((countback + (PKTSZ - 1)) / PKTSZ));
+	}
+	spin_lock_irqsave(&priv->tx_lock, flags);
+	--priv->tx_outstanding_urbs;
+	priv->tx_outstanding_bytes -= countback;
+	spin_unlock_irqrestore(&priv->tx_lock, flags);
+
 	usb_serial_port_softint(port);
 } /* ftdi_write_bulk_callback */
 
 
 static int ftdi_write_room( struct usb_serial_port *port )
 {
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	int room;
+	unsigned long flags;
+
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
-	/*
-	 * We really can take anything the user throws at us
-	 * but let's pick a nice big number to tell the tty
-	 * layer that we have lots of free space
-	 */
-	return 2048;
+	spin_lock_irqsave(&priv->tx_lock, flags);
+	if (priv->tx_outstanding_urbs < URB_UPPER_LIMIT) {
+		/*
+		 * We really can take anything the user throws at us
+		 * but let's pick a nice big number to tell the tty
+		 * layer that we have lots of free space
+		 */
+		room = 2048;
+	} else {
+		room = 0;
+	}
+	spin_unlock_irqrestore(&priv->tx_lock, flags);
+	return room;
 } /* ftdi_write_room */
 
 
 static int ftdi_chars_in_buffer (struct usb_serial_port *port)
 { /* ftdi_chars_in_buffer */
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	int buffered;
+	unsigned long flags;
+
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
-	/* 
-	 * We can't really account for how much data we
-	 * have sent out, but hasn't made it through to the
-	 * device, so just tell the tty layer that everything
-	 * is flushed.
-	 */
-	return 0;
+	spin_lock_irqsave(&priv->tx_lock, flags);
+	buffered = (int)priv->tx_outstanding_bytes;
+	spin_unlock_irqrestore(&priv->tx_lock, flags);
+	if (buffered < 0) {
+		err("%s outstanding tx bytes is negative!", __FUNCTION__);
+		buffered = 0;
+	}
+	return buffered;
 } /* ftdi_chars_in_buffer */
 
 
@@ -1509,6 +1580,8 @@
 	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
 	struct tty_struct *tty;
 	struct ftdi_private *priv;
+	unsigned long countread;
+	unsigned long flags;
 
 	if (urb->number_of_packets > 0) {
 		err("%s transfer_buffer_length %d actual_length %d number of packets %d",__FUNCTION__,
@@ -1543,6 +1616,13 @@
 		return;
 	}
 
+	/* count data bytes, but not status bytes */
+	countread = urb->actual_length;
+	countread -= 2 * ((countread + (PKTSZ - 1)) / PKTSZ);
+	spin_lock_irqsave(&priv->rx_lock, flags);
+	priv->rx_bytes += countread;
+	spin_unlock_irqrestore(&priv->rx_lock, flags);
+
 	ftdi_process_read(port);
 
 } /* ftdi_read_bulk_callback */
diff -urN linux-2.6.18-rc1/drivers/usb/serial/ftdi_sio.h linux-2.6.18-rc2/drivers/usb/serial/ftdi_sio.h
--- linux-2.6.18-rc1/drivers/usb/serial/ftdi_sio.h	2006-07-15 22:34:43.157060411 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/ftdi_sio.h	2006-07-15 22:34:48.437633608 +0000
@@ -36,6 +36,9 @@
 #define FTDI_ACTZWAVE_PID	0xF2D0
 
 
+/* www.starting-point-systems.com µChameleon device */
+#define FTDI_MICRO_CHAMELEON_PID	0xCAA0	/* Product Id */
+
 /* www.irtrans.de device */
 #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
 
@@ -442,6 +445,18 @@
  */
 #define FTDI_YEI_SERVOCENTER31_PID	0xE050	/* YEI ServoCenter3.1 USB */
 
+/*
+ * ThorLabs USB motor drivers
+ */
+#define FTDI_THORLABS_PID		0xfaf0 /* ThorLabs USB motor drivers */
+
+/*
+ * Testo products (http://www.testo.com/)
+ * Submitted by Colin Leroy
+ */
+#define TESTO_VID			0x128D
+#define TESTO_USB_INTERFACE_PID		0x0001
+
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */
diff -urN linux-2.6.18-rc1/drivers/usb/serial/funsoft.c linux-2.6.18-rc2/drivers/usb/serial/funsoft.c
--- linux-2.6.18-rc1/drivers/usb/serial/funsoft.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/funsoft.c	2006-07-15 22:34:48.437633608 +0000
@@ -13,7 +13,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1404, 0xcddc) },
diff -urN linux-2.6.18-rc1/drivers/usb/serial/garmin_gps.c linux-2.6.18-rc2/drivers/usb/serial/garmin_gps.c
--- linux-2.6.18-rc1/drivers/usb/serial/garmin_gps.c	2006-07-15 22:34:43.157060411 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/garmin_gps.c	2006-07-15 22:34:48.437633608 +0000
@@ -35,6 +35,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 
 /* the mode to be set when the port ist opened */
 static int initial_mode = 1;
@@ -42,8 +43,6 @@
 /* debug flag */
 static int debug = 0;
 
-#include "usb-serial.h"
-
 #define GARMIN_VENDOR_ID             0x091E
 
 /*
diff -urN linux-2.6.18-rc1/drivers/usb/serial/generic.c linux-2.6.18-rc2/drivers/usb/serial/generic.c
--- linux-2.6.18-rc1/drivers/usb/serial/generic.c	2006-07-15 22:34:43.157060411 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/generic.c	2006-07-15 22:34:48.437633608 +0000
@@ -17,8 +17,8 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 #include <asm/uaccess.h>
-#include "usb-serial.h"
 
 static int debug;
 
@@ -285,6 +285,7 @@
 	if (result)
 		dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
 }
+EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback);
 
 void usb_serial_generic_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
 {
diff -urN linux-2.6.18-rc1/drivers/usb/serial/hp4x.c linux-2.6.18-rc2/drivers/usb/serial/hp4x.c
--- linux-2.6.18-rc1/drivers/usb/serial/hp4x.c	2006-07-15 22:34:43.157060411 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/hp4x.c	2006-07-15 22:34:48.437633608 +0000
@@ -17,7 +17,7 @@
 #include <linux/tty.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 /*
  * Version Information
diff -urN linux-2.6.18-rc1/drivers/usb/serial/io_edgeport.c linux-2.6.18-rc2/drivers/usb/serial/io_edgeport.c
--- linux-2.6.18-rc1/drivers/usb/serial/io_edgeport.c	2006-07-15 22:34:43.157060411 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/io_edgeport.c	2006-07-15 22:34:48.437633608 +0000
@@ -44,7 +44,7 @@
 #include <linux/wait.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "io_edgeport.h"
 #include "io_ionsp.h"		/* info for the iosp messages */
 #include "io_16654.h"		/* 16654 UART defines */
diff -urN linux-2.6.18-rc1/drivers/usb/serial/io_ti.c linux-2.6.18-rc2/drivers/usb/serial/io_ti.c
--- linux-2.6.18-rc1/drivers/usb/serial/io_ti.c	2006-07-15 22:34:43.157060411 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/io_ti.c	2006-07-15 22:34:48.437633608 +0000
@@ -39,8 +39,8 @@
 #include <asm/uaccess.h>
 #include <asm/semaphore.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 
-#include "usb-serial.h"
 #include "io_16654.h"
 #include "io_usbvend.h"
 #include "io_ti.h"
diff -urN linux-2.6.18-rc1/drivers/usb/serial/ipaq.c linux-2.6.18-rc2/drivers/usb/serial/ipaq.c
--- linux-2.6.18-rc1/drivers/usb/serial/ipaq.c	2006-07-15 22:34:43.157060411 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/ipaq.c	2006-07-15 22:34:48.437633608 +0000
@@ -55,7 +55,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "ipaq.h"
 
 #define KP_RETRIES	100
@@ -70,6 +70,8 @@
 
 static __u16 product, vendor;
 static int debug;
+static int connect_retries = KP_RETRIES;
+static int initial_wait;
 
 /* Function prototypes for an ipaq */
 static int  ipaq_open (struct usb_serial_port *port, struct file *filp);
@@ -582,7 +584,7 @@
 	struct ipaq_private	*priv;
 	struct ipaq_packet	*pkt;
 	int			i, result = 0;
-	int			retries = KP_RETRIES;
+	int			retries = connect_retries;
 
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
@@ -646,16 +648,12 @@
 	port->read_urb->transfer_buffer_length = URBDATA_SIZE;
 	port->bulk_out_size = port->write_urb->transfer_buffer_length = URBDATA_SIZE;
 	
+	msleep(1000*initial_wait);
 	/* Start reading from the device */
 	usb_fill_bulk_urb(port->read_urb, serial->dev, 
 		      usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress),
 		      port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
 		      ipaq_read_bulk_callback, port);
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (result) {
-		err("%s - failed submitting read urb, error %d", __FUNCTION__, result);
-		goto error;
-	}
 
 	/*
 	 * Send out control message observed in win98 sniffs. Not sure what
@@ -670,8 +668,14 @@
 				usb_sndctrlpipe(serial->dev, 0), 0x22, 0x21,
 				0x1, 0, NULL, 0, 100);
 		if (result == 0) {
+			result = usb_submit_urb(port->read_urb, GFP_KERNEL);
+			if (result) {
+				err("%s - failed submitting read urb, error %d", __FUNCTION__, result);
+				goto error;
+			}
 			return 0;
 		}
+		msleep(1000);
 	}
 	err("%s - failed doing control urb, error %d", __FUNCTION__, result);
 	goto error;
@@ -854,6 +858,7 @@
 	
 	if (urb->status) {
 		dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
+		return;
 	}
 
 	spin_lock_irqsave(&write_list_lock, flags);
@@ -966,3 +971,9 @@
 
 module_param(product, ushort, 0);
 MODULE_PARM_DESC(product, "User specified USB idProduct");
+
+module_param(connect_retries, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(connect_retries, "Maximum number of connect retries (one second each)");
+
+module_param(initial_wait, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(initial_wait, "Time to wait before attempting a connection (in seconds)");
diff -urN linux-2.6.18-rc1/drivers/usb/serial/ipw.c linux-2.6.18-rc2/drivers/usb/serial/ipw.c
--- linux-2.6.18-rc1/drivers/usb/serial/ipw.c	2006-07-15 22:34:43.157060411 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/ipw.c	2006-07-15 22:34:48.441634042 +0000
@@ -46,8 +46,8 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 #include <asm/uaccess.h>
-#include "usb-serial.h"
 
 /*
  * Version Information
@@ -373,6 +373,8 @@
 
 	dbg("%s", __FUNCTION__);
 
+	port->write_urb_busy = 0;
+
 	if (urb->status)
 		dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
 
diff -urN linux-2.6.18-rc1/drivers/usb/serial/ir-usb.c linux-2.6.18-rc2/drivers/usb/serial/ir-usb.c
--- linux-2.6.18-rc1/drivers/usb/serial/ir-usb.c	2006-07-15 22:34:43.161060846 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/ir-usb.c	2006-07-15 22:34:48.441634042 +0000
@@ -57,7 +57,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 /*
  * Version Information
diff -urN linux-2.6.18-rc1/drivers/usb/serial/keyspan.c linux-2.6.18-rc2/drivers/usb/serial/keyspan.c
--- linux-2.6.18-rc1/drivers/usb/serial/keyspan.c	2006-07-15 22:34:43.161060846 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/keyspan.c	2006-07-15 22:34:48.441634042 +0000
@@ -107,7 +107,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "keyspan.h"
 
 static int debug;
diff -urN linux-2.6.18-rc1/drivers/usb/serial/keyspan_pda.c linux-2.6.18-rc2/drivers/usb/serial/keyspan_pda.c
--- linux-2.6.18-rc1/drivers/usb/serial/keyspan_pda.c	2006-07-15 22:34:43.161060846 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/keyspan_pda.c	2006-07-15 22:34:48.441634042 +0000
@@ -78,6 +78,7 @@
 #include <linux/workqueue.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 
 static int debug;
 
@@ -107,8 +108,6 @@
 #include "xircom_pgs_fw.h"
 #endif
 
-#include "usb-serial.h"
-
 /*
  * Version Information
  */
diff -urN linux-2.6.18-rc1/drivers/usb/serial/kl5kusb105.c linux-2.6.18-rc2/drivers/usb/serial/kl5kusb105.c
--- linux-2.6.18-rc1/drivers/usb/serial/kl5kusb105.c	2006-07-15 22:34:43.161060846 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/kl5kusb105.c	2006-07-15 22:34:48.441634042 +0000
@@ -55,7 +55,7 @@
 #include <linux/module.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "kl5kusb105.h"
 
 static int debug;
diff -urN linux-2.6.18-rc1/drivers/usb/serial/kobil_sct.c linux-2.6.18-rc2/drivers/usb/serial/kobil_sct.c
--- linux-2.6.18-rc1/drivers/usb/serial/kobil_sct.c	2006-07-15 22:34:43.161060846 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/kobil_sct.c	2006-07-15 22:34:48.441634042 +0000
@@ -46,8 +46,8 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 #include <linux/ioctl.h>
-#include "usb-serial.h"
 #include "kobil_sct.h"
 
 static int debug;
diff -urN linux-2.6.18-rc1/drivers/usb/serial/mct_u232.c linux-2.6.18-rc2/drivers/usb/serial/mct_u232.c
--- linux-2.6.18-rc1/drivers/usb/serial/mct_u232.c	2006-07-15 22:34:43.161060846 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/mct_u232.c	2006-07-15 22:34:48.441634042 +0000
@@ -75,7 +75,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "mct_u232.h"
 
 /*
diff -urN linux-2.6.18-rc1/drivers/usb/serial/navman.c linux-2.6.18-rc2/drivers/usb/serial/navman.c
--- linux-2.6.18-rc1/drivers/usb/serial/navman.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/navman.c	2006-07-15 22:34:48.441634042 +0000
@@ -14,7 +14,7 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static int debug;
 
diff -urN linux-2.6.18-rc1/drivers/usb/serial/omninet.c linux-2.6.18-rc2/drivers/usb/serial/omninet.c
--- linux-2.6.18-rc1/drivers/usb/serial/omninet.c	2006-07-15 22:34:43.161060846 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/omninet.c	2006-07-15 22:34:48.441634042 +0000
@@ -46,7 +46,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 static int debug;
 
diff -urN linux-2.6.18-rc1/drivers/usb/serial/option.c linux-2.6.18-rc2/drivers/usb/serial/option.c
--- linux-2.6.18-rc1/drivers/usb/serial/option.c	2006-07-15 22:34:43.161060846 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/option.c	2006-07-15 22:34:48.441634042 +0000
@@ -35,6 +35,7 @@
   2006-06-01  v0.6.2 add backwards-compatibility stuff
   2006-06-01  v0.6.3 add Novatel Wireless
   2006-06-01  v0.7   Option => GSM
+  2006-06-01  v0.7.1 add COBRA2
 
   Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
 
@@ -53,7 +54,7 @@
   device features.
 */
 
-#define DRIVER_VERSION "v0.7.0"
+#define DRIVER_VERSION "v0.7.1"
 #define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
 #define DRIVER_DESC "USB Driver for GSM modems"
 
@@ -64,7 +65,7 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 /* Function prototypes */
 static int  option_open(struct usb_serial_port *port, struct file *filp);
@@ -102,6 +103,7 @@
 #define OPTION_PRODUCT_FUSION           0x6000
 #define OPTION_PRODUCT_FUSION2          0x6300
 #define OPTION_PRODUCT_COBRA            0x6500
+#define OPTION_PRODUCT_COBRA2           0x6600
 #define HUAWEI_PRODUCT_E600             0x1001
 #define AUDIOVOX_PRODUCT_AIRCARD        0x0112
 #define SIERRAWIRELESS_PRODUCT_MC8755   0x6802
@@ -112,6 +114,7 @@
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
 	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
 	{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
 	{ USB_DEVICE(SIERRAWIRELESS_VENDOR_ID, SIERRAWIRELESS_PRODUCT_MC8755) },
@@ -124,6 +127,7 @@
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
 	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
 	{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
diff -urN linux-2.6.18-rc1/drivers/usb/serial/pl2303.c linux-2.6.18-rc2/drivers/usb/serial/pl2303.c
--- linux-2.6.18-rc1/drivers/usb/serial/pl2303.c	2006-07-15 22:34:43.161060846 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/pl2303.c	2006-07-15 22:34:48.441634042 +0000
@@ -27,7 +27,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "pl2303.h"
 
 /*
@@ -52,6 +52,7 @@
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
@@ -79,6 +80,7 @@
 	{ USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) },
 	{ USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },
 	{ USB_DEVICE(OTI_VENDOR_ID, OTI_PRODUCT_ID) },
+	{ USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 
diff -urN linux-2.6.18-rc1/drivers/usb/serial/pl2303.h linux-2.6.18-rc2/drivers/usb/serial/pl2303.h
--- linux-2.6.18-rc1/drivers/usb/serial/pl2303.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/pl2303.h	2006-07-15 22:34:48.445634477 +0000
@@ -10,6 +10,7 @@
 #define PL2303_VENDOR_ID	0x067b
 #define PL2303_PRODUCT_ID	0x2303
 #define PL2303_PRODUCT_ID_RSAQ2		0x04bb
+#define PL2303_PRODUCT_ID_DCU11		0x1234
 #define PL2303_PRODUCT_ID_PHAROS	0xaaa0
 #define PL2303_PRODUCT_ID_RSAQ3		0xaaa2
 
@@ -84,3 +85,7 @@
 /* Ours Technology Inc DKU-5 clone, chipset: Prolific Technology Inc */
 #define OTI_VENDOR_ID	0x0ea0
 #define OTI_PRODUCT_ID	0x6858
+
+/* DATAPILOT Universal-2 Phone Cable */
+#define DATAPILOT_U2_VENDOR_ID	0x0731
+#define DATAPILOT_U2_PRODUCT_ID	0x2003
diff -urN linux-2.6.18-rc1/drivers/usb/serial/safe_serial.c linux-2.6.18-rc2/drivers/usb/serial/safe_serial.c
--- linux-2.6.18-rc1/drivers/usb/serial/safe_serial.c	2006-07-15 22:34:43.161060846 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/safe_serial.c	2006-07-15 22:34:48.445634477 +0000
@@ -71,7 +71,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 
 
 #ifndef CONFIG_USB_SAFE_PADDED
diff -urN linux-2.6.18-rc1/drivers/usb/serial/sierra.c linux-2.6.18-rc2/drivers/usb/serial/sierra.c
--- linux-2.6.18-rc1/drivers/usb/serial/sierra.c	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/sierra.c	2006-07-15 22:34:48.445634477 +0000
@@ -0,0 +1,75 @@
+/*
+ * Sierra Wireless CDMA Wireless Serial USB driver
+ *
+ * Current Copy modified by: Kevin Lloyd <linux@sierrawireless.com>
+ * Original Copyright (C) 2005-2006 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License version
+ *	2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+static struct usb_device_id id_table [] = {
+	{ USB_DEVICE(0x1199, 0x0018) },	/* Sierra Wireless MC5720 */
+	{ USB_DEVICE(0x1199, 0x0020) },	/* Sierra Wireless MC5725 */
+	{ USB_DEVICE(0x1199, 0x0017) },	/* Sierra Wireless EM5625 */
+	{ USB_DEVICE(0x1199, 0x0019) },	/* Sierra Wireless AirCard 595 */
+	{ USB_DEVICE(0x1199, 0x6802) },	/* Sierra Wireless MC8755 */
+	{ USB_DEVICE(0x1199, 0x6803) },	/* Sierra Wireless MC8765 */
+	{ USB_DEVICE(0x1199, 0x6812) },	/* Sierra Wireless MC8775 */
+	{ USB_DEVICE(0x1199, 0x6820) },	/* Sierra Wireless AirCard 875 */
+	/* Following devices are supported in the airprime.c driver */
+	/* { USB_DEVICE(0x1199, 0x0112) }, */	/* Sierra Wireless AirCard 580 */
+	/* { USB_DEVICE(0x0F3D, 0x0112) }, */	/* AirPrime/Sierra PC 5220 */
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver sierra_driver = {
+	.name =		"sierra_wireless",
+	.probe =	usb_serial_probe,
+	.disconnect =	usb_serial_disconnect,
+	.id_table =	id_table,
+};
+
+static struct usb_serial_driver sierra_device = {
+	.driver = {
+	.owner =		THIS_MODULE,
+	.name =			"Sierra_Wireless",
+	},
+	.id_table =		id_table,
+	.num_interrupt_in =	NUM_DONT_CARE,
+	.num_bulk_in =		NUM_DONT_CARE,
+	.num_bulk_out =		NUM_DONT_CARE,
+	.num_ports =		3,
+};
+
+static int __init sierra_init(void)
+{
+	int retval;
+
+	retval = usb_serial_register(&sierra_device);
+	if (retval)
+		return retval;
+	retval = usb_register(&sierra_driver);
+	if (retval)
+		usb_serial_deregister(&sierra_device);
+	return retval;
+}
+
+static void __exit sierra_exit(void)
+{
+	usb_deregister(&sierra_driver);
+	usb_serial_deregister(&sierra_device);
+}
+
+module_init(sierra_init);
+module_exit(sierra_exit);
+MODULE_LICENSE("GPL");
diff -urN linux-2.6.18-rc1/drivers/usb/serial/ti_usb_3410_5052.c linux-2.6.18-rc2/drivers/usb/serial/ti_usb_3410_5052.c
--- linux-2.6.18-rc1/drivers/usb/serial/ti_usb_3410_5052.c	2006-07-15 22:34:43.165061280 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/ti_usb_3410_5052.c	2006-07-15 22:34:48.445634477 +0000
@@ -83,8 +83,8 @@
 #include <asm/uaccess.h>
 #include <asm/semaphore.h>
 #include <linux/usb.h>
+#include <linux/usb/serial.h>
 
-#include "usb-serial.h"
 #include "ti_usb_3410_5052.h"
 #include "ti_fw_3410.h"		/* firmware image for 3410 */
 #include "ti_fw_5052.h"		/* firmware image for 5052 */
diff -urN linux-2.6.18-rc1/drivers/usb/serial/usb-serial.c linux-2.6.18-rc2/drivers/usb/serial/usb-serial.c
--- linux-2.6.18-rc1/drivers/usb/serial/usb-serial.c	2006-07-15 22:34:43.165061280 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/usb-serial.c	2006-07-15 22:34:48.445634477 +0000
@@ -31,7 +31,7 @@
 #include <linux/smp_lock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "pl2303.h"
 
 /*
@@ -40,6 +40,8 @@
 #define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/"
 #define DRIVER_DESC "USB Serial Driver core"
 
+static void port_free(struct usb_serial_port *port);
+
 /* Driver structure we register with the USB core */
 static struct usb_driver usb_serial_driver = {
 	.name =		"usbserial",
@@ -146,23 +148,10 @@
 			port = serial->port[i];
 			if (!port)
 				continue;
-			usb_kill_urb(port->read_urb);
-			usb_free_urb(port->read_urb);
-			usb_kill_urb(port->write_urb);
-			usb_free_urb(port->write_urb);
-			usb_kill_urb(port->interrupt_in_urb);
-			usb_free_urb(port->interrupt_in_urb);
-			usb_kill_urb(port->interrupt_out_urb);
-			usb_free_urb(port->interrupt_out_urb);
-			kfree(port->bulk_in_buffer);
-			kfree(port->bulk_out_buffer);
-			kfree(port->interrupt_in_buffer);
-			kfree(port->interrupt_out_buffer);
+			port_free(port);
 		}
 	}
 
-	flush_scheduled_work();		/* port->work */
-
 	usb_put_dev(serial->dev);
 
 	/* free up any memory that we allocated */
@@ -564,6 +553,11 @@
 	struct usb_serial_port *port = to_usb_serial_port(dev);
 
 	dbg ("%s - %s", __FUNCTION__, dev->bus_id);
+	port_free(port);
+}
+
+static void port_free(struct usb_serial_port *port)
+{
 	usb_kill_urb(port->read_urb);
 	usb_free_urb(port->read_urb);
 	usb_kill_urb(port->write_urb);
@@ -576,6 +570,7 @@
 	kfree(port->bulk_out_buffer);
 	kfree(port->interrupt_in_buffer);
 	kfree(port->interrupt_out_buffer);
+	flush_scheduled_work();		/* port->work */
 	kfree(port);
 }
 
diff -urN linux-2.6.18-rc1/drivers/usb/serial/usb-serial.h linux-2.6.18-rc2/drivers/usb/serial/usb-serial.h
--- linux-2.6.18-rc1/drivers/usb/serial/usb-serial.h	2006-07-15 22:34:43.165061280 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/usb-serial.h	1970-01-01 00:00:00.000000000 +0000
@@ -1,300 +0,0 @@
-/*
- * USB Serial Converter driver
- *
- *	Copyright (C) 1999 - 2005
- *	    Greg Kroah-Hartman (greg@kroah.com)
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License.
- *
- */
-
-
-#ifndef __LINUX_USB_SERIAL_H
-#define __LINUX_USB_SERIAL_H
-
-#include <linux/kref.h>
-#include <linux/mutex.h>
-
-#define SERIAL_TTY_MAJOR	188	/* Nice legal number now */
-#define SERIAL_TTY_MINORS	255	/* loads of devices :) */
-
-#define MAX_NUM_PORTS		8	/* The maximum number of ports one device can grab at once */
-
-/* parity check flag */
-#define RELEVANT_IFLAG(iflag)	(iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
-
-/**
- * usb_serial_port: structure for the specific ports of a device.
- * @serial: pointer back to the struct usb_serial owner of this port.
- * @tty: pointer to the corresponding tty for this port.
- * @lock: spinlock to grab when updating portions of this structure.
- * @mutex: mutex used to synchronize serial_open() and serial_close()
- *	access for this port.
- * @number: the number of the port (the minor number).
- * @interrupt_in_buffer: pointer to the interrupt in buffer for this port.
- * @interrupt_in_urb: pointer to the interrupt in struct urb for this port.
- * @interrupt_in_endpointAddress: endpoint address for the interrupt in pipe
- *	for this port.
- * @interrupt_out_buffer: pointer to the interrupt out buffer for this port.
- * @interrupt_out_size: the size of the interrupt_out_buffer, in bytes.
- * @interrupt_out_urb: pointer to the interrupt out struct urb for this port.
- * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe
- * 	for this port.
- * @bulk_in_buffer: pointer to the bulk in buffer for this port.
- * @read_urb: pointer to the bulk in struct urb for this port.
- * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this
- *	port.
- * @bulk_out_buffer: pointer to the bulk out buffer for this port.
- * @bulk_out_size: the size of the bulk_out_buffer, in bytes.
- * @write_urb: pointer to the bulk out struct urb for this port.
- * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this
- *	port.
- * @write_wait: a wait_queue_head_t used by the port.
- * @work: work queue entry for the line discipline waking up.
- * @open_count: number of times this port has been opened.
- *
- * This structure is used by the usb-serial core and drivers for the specific
- * ports of a device.
- */
-struct usb_serial_port {
-	struct usb_serial *	serial;
-	struct tty_struct *	tty;
-	spinlock_t		lock;
-	struct mutex            mutex;
-	unsigned char		number;
-
-	unsigned char *		interrupt_in_buffer;
-	struct urb *		interrupt_in_urb;
-	__u8			interrupt_in_endpointAddress;
-
-	unsigned char *		interrupt_out_buffer;
-	int			interrupt_out_size;
-	struct urb *		interrupt_out_urb;
-	__u8			interrupt_out_endpointAddress;
-
-	unsigned char *		bulk_in_buffer;
-	int			bulk_in_size;
-	struct urb *		read_urb;
-	__u8			bulk_in_endpointAddress;
-
-	unsigned char *		bulk_out_buffer;
-	int			bulk_out_size;
-	struct urb *		write_urb;
-	int			write_urb_busy;
-	__u8			bulk_out_endpointAddress;
-
-	wait_queue_head_t	write_wait;
-	struct work_struct	work;
-	int			open_count;
-	struct device		dev;
-};
-#define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev)
-
-/* get and set the port private data pointer helper functions */
-static inline void *usb_get_serial_port_data (struct usb_serial_port *port)
-{
-	return dev_get_drvdata(&port->dev);
-}
-
-static inline void usb_set_serial_port_data (struct usb_serial_port *port, void *data)
-{
-	dev_set_drvdata(&port->dev, data);
-}
-
-/**
- * usb_serial - structure used by the usb-serial core for a device
- * @dev: pointer to the struct usb_device for this device
- * @type: pointer to the struct usb_serial_driver for this device
- * @interface: pointer to the struct usb_interface for this device
- * @minor: the starting minor number for this device
- * @num_ports: the number of ports this device has
- * @num_interrupt_in: number of interrupt in endpoints we have
- * @num_interrupt_out: number of interrupt out endpoints we have
- * @num_bulk_in: number of bulk in endpoints we have
- * @num_bulk_out: number of bulk out endpoints we have
- * @port: array of struct usb_serial_port structures for the different ports.
- * @private: place to put any driver specific information that is needed.  The
- *	usb-serial driver is required to manage this data, the usb-serial core
- *	will not touch this.  Use usb_get_serial_data() and
- *	usb_set_serial_data() to access this.
- */
-struct usb_serial {
-	struct usb_device *		dev;
-	struct usb_serial_driver *	type;
-	struct usb_interface *		interface;
-	unsigned char			minor;
-	unsigned char			num_ports;
-	unsigned char			num_port_pointers;
-	char				num_interrupt_in;
-	char				num_interrupt_out;
-	char				num_bulk_in;
-	char				num_bulk_out;
-	struct usb_serial_port *	port[MAX_NUM_PORTS];
-	struct kref			kref;
-	void *				private;
-};
-#define to_usb_serial(d) container_of(d, struct usb_serial, kref)
-
-#define NUM_DONT_CARE	(-1)
-
-/* get and set the serial private data pointer helper functions */
-static inline void *usb_get_serial_data (struct usb_serial *serial)
-{
-	return serial->private;
-}
-
-static inline void usb_set_serial_data (struct usb_serial *serial, void *data)
-{
-	serial->private = data;
-}
-
-/**
- * usb_serial_driver - describes a usb serial driver
- * @description: pointer to a string that describes this driver.  This string used
- *	in the syslog messages when a device is inserted or removed.
- * @id_table: pointer to a list of usb_device_id structures that define all
- *	of the devices this structure can support.
- * @num_interrupt_in: the number of interrupt in endpoints this device will
- *	have.
- * @num_interrupt_out: the number of interrupt out endpoints this device will
- *	have.
- * @num_bulk_in: the number of bulk in endpoints this device will have.
- * @num_bulk_out: the number of bulk out endpoints this device will have.
- * @num_ports: the number of different ports this device will have.
- * @calc_num_ports: pointer to a function to determine how many ports this
- *	device has dynamically.  It will be called after the probe()
- *	callback is called, but before attach()
- * @probe: pointer to the driver's probe function.
- *	This will be called when the device is inserted into the system,
- *	but before the device has been fully initialized by the usb_serial
- *	subsystem.  Use this function to download any firmware to the device,
- *	or any other early initialization that might be needed.
- *	Return 0 to continue on with the initialization sequence.  Anything 
- *	else will abort it.
- * @attach: pointer to the driver's attach function.
- *	This will be called when the struct usb_serial structure is fully set
- *	set up.  Do any local initialization of the device, or any private
- *	memory structure allocation at this point in time.
- * @shutdown: pointer to the driver's shutdown function.  This will be
- *	called when the device is removed from the system.
- *
- * This structure is defines a USB Serial driver.  It provides all of
- * the information that the USB serial core code needs.  If the function
- * pointers are defined, then the USB serial core code will call them when
- * the corresponding tty port functions are called.  If they are not
- * called, the generic serial function will be used instead.
- *
- * The driver.owner field should be set to the module owner of this driver.
- * The driver.name field should be set to the name of this driver (remember
- * it will show up in sysfs, so it needs to be short and to the point.
- * Useing the module name is a good idea.)
- */
-struct usb_serial_driver {
-	const char *description;
-	const struct usb_device_id *id_table;
-	char	num_interrupt_in;
-	char	num_interrupt_out;
-	char	num_bulk_in;
-	char	num_bulk_out;
-	char	num_ports;
-
-	struct list_head	driver_list;
-	struct device_driver	driver;
-
-	int (*probe) (struct usb_serial *serial, const struct usb_device_id *id);
-	int (*attach) (struct usb_serial *serial);
-	int (*calc_num_ports) (struct usb_serial *serial);
-
-	void (*shutdown) (struct usb_serial *serial);
-
-	int (*port_probe) (struct usb_serial_port *port);
-	int (*port_remove) (struct usb_serial_port *port);
-
-	/* serial function calls */
-	int  (*open)		(struct usb_serial_port *port, struct file * filp);
-	void (*close)		(struct usb_serial_port *port, struct file * filp);
-	int  (*write)		(struct usb_serial_port *port, const unsigned char *buf, int count);
-	int  (*write_room)	(struct usb_serial_port *port);
-	int  (*ioctl)		(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
-	void (*set_termios)	(struct usb_serial_port *port, struct termios * old);
-	void (*break_ctl)	(struct usb_serial_port *port, int break_state);
-	int  (*chars_in_buffer)	(struct usb_serial_port *port);
-	void (*throttle)	(struct usb_serial_port *port);
-	void (*unthrottle)	(struct usb_serial_port *port);
-	int  (*tiocmget)	(struct usb_serial_port *port, struct file *file);
-	int  (*tiocmset)	(struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
-
-	void (*read_int_callback)(struct urb *urb, struct pt_regs *regs);
-	void (*write_int_callback)(struct urb *urb, struct pt_regs *regs);
-	void (*read_bulk_callback)(struct urb *urb, struct pt_regs *regs);
-	void (*write_bulk_callback)(struct urb *urb, struct pt_regs *regs);
-};
-#define to_usb_serial_driver(d) container_of(d, struct usb_serial_driver, driver)
-
-extern int  usb_serial_register(struct usb_serial_driver *driver);
-extern void usb_serial_deregister(struct usb_serial_driver *driver);
-extern void usb_serial_port_softint(struct usb_serial_port *port);
-
-extern int usb_serial_probe(struct usb_interface *iface, const struct usb_device_id *id);
-extern void usb_serial_disconnect(struct usb_interface *iface);
-
-extern int ezusb_writememory (struct usb_serial *serial, int address, unsigned char *data, int length, __u8 bRequest);
-extern int ezusb_set_reset (struct usb_serial *serial, unsigned char reset_bit);
-
-/* USB Serial console functions */
-#ifdef CONFIG_USB_SERIAL_CONSOLE
-extern void usb_serial_console_init (int debug, int minor);
-extern void usb_serial_console_exit (void);
-extern void usb_serial_console_disconnect(struct usb_serial *serial);
-#else
-static inline void usb_serial_console_init (int debug, int minor) { }
-static inline void usb_serial_console_exit (void) { }
-static inline void usb_serial_console_disconnect(struct usb_serial *serial) {}
-#endif
-
-/* Functions needed by other parts of the usbserial core */
-extern struct usb_serial *usb_serial_get_by_index (unsigned int minor);
-extern void usb_serial_put(struct usb_serial *serial);
-extern int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp);
-extern int usb_serial_generic_write (struct usb_serial_port *port, const unsigned char *buf, int count);
-extern void usb_serial_generic_close (struct usb_serial_port *port, struct file *filp);
-extern int usb_serial_generic_write_room (struct usb_serial_port *port);
-extern int usb_serial_generic_chars_in_buffer (struct usb_serial_port *port);
-extern void usb_serial_generic_read_bulk_callback (struct urb *urb, struct pt_regs *regs);
-extern void usb_serial_generic_write_bulk_callback (struct urb *urb, struct pt_regs *regs);
-extern void usb_serial_generic_shutdown (struct usb_serial *serial);
-extern int usb_serial_generic_register (int debug);
-extern void usb_serial_generic_deregister (void);
-
-extern int usb_serial_bus_register (struct usb_serial_driver *device);
-extern void usb_serial_bus_deregister (struct usb_serial_driver *device);
-
-extern struct usb_serial_driver usb_serial_generic_device;
-extern struct bus_type usb_serial_bus_type;
-extern struct tty_driver *usb_serial_tty_driver;
-
-static inline void usb_serial_debug_data(int debug,
-					 struct device *dev,
-					 const char *function, int size,
-					 const unsigned char *data)
-{
-	int i;
-
-	if (debug) {
-		dev_printk(KERN_DEBUG, dev, "%s - length = %d, data = ", function, size);
-		for (i = 0; i < size; ++i)
-			printk ("%.2x ", data[i]);
-		printk ("\n");
-	}
-}
-
-/* Use our own dbg macro */
-#undef dbg
-#define dbg(format, arg...) do { if (debug) printk(KERN_DEBUG "%s: " format "\n" , __FILE__ , ## arg); } while (0)
-
-
-
-#endif	/* ifdef __LINUX_USB_SERIAL_H */
-
diff -urN linux-2.6.18-rc1/drivers/usb/serial/visor.c linux-2.6.18-rc2/drivers/usb/serial/visor.c
--- linux-2.6.18-rc1/drivers/usb/serial/visor.c	2006-07-15 22:34:43.165061280 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/visor.c	2006-07-15 22:34:48.445634477 +0000
@@ -25,7 +25,7 @@
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <linux/usb.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "visor.h"
 
 /*
@@ -302,7 +302,6 @@
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->bytes_in = 0;
 	priv->bytes_out = 0;
-	priv->outstanding_urbs = 0;
 	priv->throttled = 0;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
@@ -435,13 +434,25 @@
 
 static int visor_write_room (struct usb_serial_port *port)
 {
+	struct visor_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
 	/*
 	 * We really can take anything the user throws at us
 	 * but let's pick a nice big number to tell the tty
-	 * layer that we have lots of free space
+	 * layer that we have lots of free space, unless we don't.
 	 */
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) {
+		spin_unlock_irqrestore(&priv->lock, flags);
+		dbg("%s - write limit hit\n", __FUNCTION__);
+		return 0;
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+
 	return 2048;
 }
 
@@ -758,15 +769,22 @@
 
 static int generic_startup(struct usb_serial *serial)
 {
+	struct usb_serial_port **ports = serial->port;
 	struct visor_private *priv;
 	int i;
 
 	for (i = 0; i < serial->num_ports; ++i) {
 		priv = kzalloc (sizeof(*priv), GFP_KERNEL);
-		if (!priv)
+		if (!priv) {
+			while (i-- != 0) {
+				priv = usb_get_serial_port_data(ports[i]);
+				usb_set_serial_port_data(ports[i], NULL);
+				kfree(priv);
+			}
 			return -ENOMEM;
+		}
 		spin_lock_init(&priv->lock);
-		usb_set_serial_port_data(serial->port[i], priv);
+		usb_set_serial_port_data(ports[i], priv);
 	}
 	return 0;
 }
@@ -876,7 +894,18 @@
 
 static void visor_shutdown (struct usb_serial *serial)
 {
+	struct visor_private *priv;
+	int i;
+
 	dbg("%s", __FUNCTION__);
+
+	for (i = 0; i < serial->num_ports; i++) {
+		priv = usb_get_serial_port_data(serial->port[i]);
+		if (priv) {
+			usb_set_serial_port_data(serial->port[i], NULL);
+			kfree(priv);
+		}
+	}
 }
 
 static int visor_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
diff -urN linux-2.6.18-rc1/drivers/usb/serial/whiteheat.c linux-2.6.18-rc2/drivers/usb/serial/whiteheat.c
--- linux-2.6.18-rc1/drivers/usb/serial/whiteheat.c	2006-07-15 22:34:43.165061280 +0000
+++ linux-2.6.18-rc2/drivers/usb/serial/whiteheat.c	2006-07-15 22:34:48.449634911 +0000
@@ -79,7 +79,7 @@
 #include <linux/usb.h>
 #include <linux/serial_reg.h>
 #include <linux/serial.h>
-#include "usb-serial.h"
+#include <linux/usb/serial.h>
 #include "whiteheat_fw.h"		/* firmware for the ConnectTech WhiteHEAT device */
 #include "whiteheat.h"			/* WhiteHEAT specific commands */
 
diff -urN linux-2.6.18-rc1/drivers/usb/storage/scsiglue.c linux-2.6.18-rc2/drivers/usb/storage/scsiglue.c
--- linux-2.6.18-rc1/drivers/usb/storage/scsiglue.c	2006-07-15 22:34:43.165061280 +0000
+++ linux-2.6.18-rc2/drivers/usb/storage/scsiglue.c	2006-07-15 22:34:48.449634911 +0000
@@ -112,13 +112,11 @@
 	if (sdev->scsi_level < SCSI_2)
 		sdev->scsi_level = sdev->sdev_target->scsi_level = SCSI_2;
 
-	/* According to the technical support people at Genesys Logic,
-	 * devices using their chips have problems transferring more than
-	 * 32 KB at a time.  In practice people have found that 64 KB
-	 * works okay and that's what Windows does.  But we'll be
-	 * conservative; people can always use the sysfs interface to
-	 * increase max_sectors. */
-	if (le16_to_cpu(us->pusb_dev->descriptor.idVendor) == USB_VENDOR_ID_GENESYS &&
+	/* Many devices have trouble transfering more than 32KB at a time,
+	 * while others have trouble with more than 64K. At this time we
+	 * are limiting both to 32K (64 sectores).
+	 */
+	if ((us->flags & US_FL_MAX_SECTORS_64) &&
 			sdev->request_queue->max_sectors > 64)
 		blk_queue_max_sectors(sdev->request_queue, 64);
 
diff -urN linux-2.6.18-rc1/drivers/usb/storage/transport.c linux-2.6.18-rc2/drivers/usb/storage/transport.c
--- linux-2.6.18-rc1/drivers/usb/storage/transport.c	2006-07-15 22:34:43.169061714 +0000
+++ linux-2.6.18-rc2/drivers/usb/storage/transport.c	2006-07-15 22:34:48.449634911 +0000
@@ -180,7 +180,7 @@
 	if (timeleft <= 0) {
 		US_DEBUGP("%s -- cancelling URB\n",
 			  timeleft == 0 ? "Timeout" : "Signal");
-		usb_unlink_urb(us->current_urb);
+		usb_kill_urb(us->current_urb);
 	}
 
 	/* return the URB status */
diff -urN linux-2.6.18-rc1/drivers/usb/storage/unusual_devs.h linux-2.6.18-rc2/drivers/usb/storage/unusual_devs.h
--- linux-2.6.18-rc1/drivers/usb/storage/unusual_devs.h	2006-07-15 22:34:43.169061714 +0000
+++ linux-2.6.18-rc2/drivers/usb/storage/unusual_devs.h	2006-07-15 22:34:48.449634911 +0000
@@ -112,6 +112,19 @@
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
+/* Submitted by Ernestas Vaiciukevicius <ernisv@gmail.com> */
+UNUSUAL_DEV(  0x0419, 0x0100, 0x0100, 0x0100,
+                "Samsung Info. Systems America, Inc.",
+                "MP3 Player",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_IGNORE_RESIDUE ),
+
+/* Reported by Orgad Shaneh <orgads@gmail.com> */
+UNUSUAL_DEV(  0x0419, 0xaace, 0x0100, 0x0100,
+		"Samsung", "MP3 Player",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
 /* Reported by Christian Leber <christian@leber.de> */
 UNUSUAL_DEV(  0x0419, 0xaaf5, 0x0100, 0x0100,
 		"TrekStor",
@@ -132,6 +145,14 @@
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
+/* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and
+ * Einar Th. Einarsson <einarthered@gmail.com> */
+UNUSUAL_DEV(  0x0421, 0x0444, 0x0100, 0x0100,
+		"Nokia",
+		"N91",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
 /* Reported by Jiri Slaby <jirislaby@gmail.com> and
  * Rene C. Castberg <Rene@Castberg.org> */
 UNUSUAL_DEV(  0x0421, 0x0446, 0x0100, 0x0100,
@@ -140,6 +161,13 @@
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
 
+/* Reported by Matthew Bloch <matthew@bytemark.co.uk> */
+UNUSUAL_DEV(  0x0421, 0x044e, 0x0100, 0x0100,
+		"Nokia",
+		"E61",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
+
 /* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
 UNUSUAL_DEV(  0x0424, 0x0fdc, 0x0210, 0x0210,
 		"SMSC",
@@ -473,10 +501,11 @@
 		US_SC_SCSI, US_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ),
 
-/* This entry is needed because the device reports Sub=ff */
-UNUSUAL_DEV(  0x054c, 0x0010, 0x0500, 0x0600,
+/* Submitted by Lars Jacob <jacob.lars@googlemail.com>
+ * This entry is needed because the device reports Sub=ff */
+UNUSUAL_DEV(  0x054c, 0x0010, 0x0500, 0x0610,
 		"Sony",
-		"DSC-T1/T5",
+		"DSC-T1/T5/H5",
 		US_SC_8070, US_PR_DEVICE, NULL,
 		US_FL_SINGLE_LUN ),
 
@@ -708,18 +737,22 @@
  * They were originally reported by Alexander Oltu
  * <alexander@all-2.com> and Peter Marks <peter.marks@turner.com>
  * respectively.
+ *
+ * US_FL_GO_SLOW and US_FL_MAX_SECTORS_64 added by Phil Dibowitz
+ * <phil@ipom.com> as these flags were made and hard-coded
+ * special-cases were pulled from scsiglue.c.
  */
 UNUSUAL_DEV(  0x05e3, 0x0701, 0x0000, 0xffff,
 		"Genesys Logic",
 		"USB to IDE Optical",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_GO_SLOW ),
+		US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
 
 UNUSUAL_DEV(  0x05e3, 0x0702, 0x0000, 0xffff,
 		"Genesys Logic",
 		"USB to IDE Disk",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_GO_SLOW ),
+		US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
 
 /* Reported by Hanno Boeck <hanno@gmx.de>
  * Taken from the Lycoris Kernel */
@@ -1196,6 +1229,14 @@
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
+/* Reported by Benjamin Schiller <sbenni@gmx.de>
+ * It is also sold by Easylite as DJ 20 */
+UNUSUAL_DEV(  0x0ed1, 0x7636, 0x0103, 0x0103,
+		"Typhoon",
+		"My DJ 1820",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64),
+
 /* Reported by Michael Stattmann <michael@stattmann.com> */
 UNUSUAL_DEV(  0x0fce, 0xd008, 0x0000, 0x0000,
 		"Sony Ericsson",
@@ -1227,6 +1268,15 @@
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
+/* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
+ * and Renato Perini <rperini@email.it>
+ */
+UNUSUAL_DEV(  0x22b8, 0x3010, 0x0001, 0x0001,
+		"Motorola",
+		"RAZR V3x",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
+
 /* Reported by Radovan Garabik <garabik@kassiopeia.juls.savba.sk> */
 UNUSUAL_DEV(  0x2735, 0x100b, 0x0000, 0x9999,
 		"MPIO",
diff -urN linux-2.6.18-rc1/drivers/usb/storage/usb.c linux-2.6.18-rc2/drivers/usb/storage/usb.c
--- linux-2.6.18-rc1/drivers/usb/storage/usb.c	2006-07-15 22:34:43.169061714 +0000
+++ linux-2.6.18-rc2/drivers/usb/storage/usb.c	2006-07-15 22:34:48.449634911 +0000
@@ -55,6 +55,7 @@
 #include <linux/slab.h>
 #include <linux/kthread.h>
 #include <linux/mutex.h>
+#include <linux/utsrelease.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
@@ -373,8 +374,12 @@
 		/* lock access to the state */
 		scsi_lock(host);
 
+		/* did the command already complete because of a disconnect? */
+		if (!us->srb)
+			;		/* nothing to do */
+
 		/* indicate that the command is done */
-		if (us->srb->result != DID_ABORT << 16) {
+		else if (us->srb->result != DID_ABORT << 16) {
 			US_DEBUGP("scsi cmd done, result=0x%x\n", 
 				   us->srb->result);
 			us->srb->scsi_done(us->srb);
@@ -524,7 +529,8 @@
 		if (msg >= 0 && !(us->flags & US_FL_NEED_OVERRIDE))
 			printk(KERN_NOTICE USB_STORAGE "This device "
 				"(%04x,%04x,%04x S %02x P %02x)"
-				" has %s in unusual_devs.h\n"
+				" has %s in unusual_devs.h (kernel"
+				" %s)\n"
 				"   Please send a copy of this message to "
 				"<linux-usb-devel@lists.sourceforge.net>\n",
 				le16_to_cpu(ddesc->idVendor),
@@ -532,7 +538,8 @@
 				le16_to_cpu(ddesc->bcdDevice),
 				idesc->bInterfaceSubClass,
 				idesc->bInterfaceProtocol,
-				msgs[msg]);
+				msgs[msg],
+				UTS_RELEASE);
 	}
 }
 
@@ -836,32 +843,34 @@
  * the host */
 static void quiesce_and_remove_host(struct us_data *us)
 {
+	struct Scsi_Host *host = us_to_host(us);
+
 	/* Prevent new USB transfers, stop the current command, and
 	 * interrupt a SCSI-scan or device-reset delay */
+	scsi_lock(host);
 	set_bit(US_FLIDX_DISCONNECTING, &us->flags);
+	scsi_unlock(host);
 	usb_stor_stop_transport(us);
 	wake_up(&us->delay_wait);
 
 	/* It doesn't matter if the SCSI-scanning thread is still running.
 	 * The thread will exit when it sees the DISCONNECTING flag. */
 
-	/* Wait for the current command to finish, then remove the host */
-	mutex_lock(&us->dev_mutex);
-	mutex_unlock(&us->dev_mutex);
-
 	/* queuecommand won't accept any new commands and the control
 	 * thread won't execute a previously-queued command.  If there
 	 * is such a command pending, complete it with an error. */
+	mutex_lock(&us->dev_mutex);
 	if (us->srb) {
 		us->srb->result = DID_NO_CONNECT << 16;
-		scsi_lock(us_to_host(us));
+		scsi_lock(host);
 		us->srb->scsi_done(us->srb);
 		us->srb = NULL;
-		scsi_unlock(us_to_host(us));
+		scsi_unlock(host);
 	}
+	mutex_unlock(&us->dev_mutex);
 
 	/* Now we own no commands so it's safe to remove the SCSI host */
-	scsi_remove_host(us_to_host(us));
+	scsi_remove_host(host);
 }
 
 /* Second stage of disconnect processing: deallocate all resources */
diff -urN linux-2.6.18-rc1/drivers/usb/storage/usb.h linux-2.6.18-rc2/drivers/usb/storage/usb.h
--- linux-2.6.18-rc1/drivers/usb/storage/usb.h	2006-07-15 22:34:43.169061714 +0000
+++ linux-2.6.18-rc2/drivers/usb/storage/usb.h	2006-07-15 22:34:48.453635345 +0000
@@ -176,8 +176,4 @@
 #define scsi_unlock(host)	spin_unlock_irq(host->host_lock)
 #define scsi_lock(host)		spin_lock_irq(host->host_lock)
 
-
-/* Vendor ID list for devices that require special handling */
-#define USB_VENDOR_ID_GENESYS		0x05e3	/* Genesys Logic */
-
 #endif
diff -urN linux-2.6.18-rc1/drivers/video/68328fb.c linux-2.6.18-rc2/drivers/video/68328fb.c
--- linux-2.6.18-rc1/drivers/video/68328fb.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/video/68328fb.c	2006-07-15 22:34:48.453635345 +0000
@@ -32,7 +32,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff -urN linux-2.6.18-rc1/drivers/video/Kconfig linux-2.6.18-rc2/drivers/video/Kconfig
--- linux-2.6.18-rc1/drivers/video/Kconfig	2006-07-15 22:34:43.169061714 +0000
+++ linux-2.6.18-rc2/drivers/video/Kconfig	2006-07-15 22:34:48.453635345 +0000
@@ -1518,6 +1518,26 @@
 
 	  <file:Documentation/fb/pxafb.txt> describes the available parameters.
 
+config FB_MBX
+	tristate "2700G LCD framebuffer support"
+	depends on FB && ARCH_PXA
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Framebuffer driver for the Intel 2700G (Marathon) Graphics
+	  Accelerator
+
+config FB_MBX_DEBUG
+       bool "Enable debugging info via debugfs"
+       depends on FB_MBX && DEBUG_FS
+       default n
+       ---help---
+         Enable this if you want debugging information using the debug
+         filesystem (debugfs)
+
+         If unsure, say N.
+
 config FB_W100
 	tristate "W100 frame buffer support"
 	depends on FB && PXA_SHARPSL
diff -urN linux-2.6.18-rc1/drivers/video/Makefile linux-2.6.18-rc2/drivers/video/Makefile
--- linux-2.6.18-rc1/drivers/video/Makefile	2006-07-15 22:34:43.169061714 +0000
+++ linux-2.6.18-rc2/drivers/video/Makefile	2006-07-15 22:34:48.453635345 +0000
@@ -38,6 +38,7 @@
 obj-$(CONFIG_FB_KYRO)             += kyro/
 obj-$(CONFIG_FB_SAVAGE)		  += savage/
 obj-$(CONFIG_FB_GEODE)		  += geode/
+obj-$(CONFIG_FB_MBX)		  += mbx/
 obj-$(CONFIG_FB_I810)             += vgastate.o
 obj-$(CONFIG_FB_NEOMAGIC)         += neofb.o vgastate.o
 obj-$(CONFIG_FB_VIRGE)            += virgefb.o
diff -urN linux-2.6.18-rc1/drivers/video/S3triofb.c linux-2.6.18-rc2/drivers/video/S3triofb.c
--- linux-2.6.18-rc1/drivers/video/S3triofb.c	2006-07-15 22:34:43.169061714 +0000
+++ linux-2.6.18-rc2/drivers/video/S3triofb.c	2006-07-15 22:34:48.453635345 +0000
@@ -28,7 +28,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff -urN linux-2.6.18-rc1/drivers/video/amifb.c linux-2.6.18-rc2/drivers/video/amifb.c
--- linux-2.6.18-rc1/drivers/video/amifb.c	2006-07-15 22:34:43.173062148 +0000
+++ linux-2.6.18-rc2/drivers/video/amifb.c	2006-07-15 22:34:48.453635345 +0000
@@ -45,7 +45,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
diff -urN linux-2.6.18-rc1/drivers/video/arcfb.c linux-2.6.18-rc2/drivers/video/arcfb.c
--- linux-2.6.18-rc1/drivers/video/arcfb.c	2006-07-15 22:34:43.173062148 +0000
+++ linux-2.6.18-rc2/drivers/video/arcfb.c	2006-07-15 22:34:48.453635345 +0000
@@ -39,7 +39,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff -urN linux-2.6.18-rc1/drivers/video/asiliantfb.c linux-2.6.18-rc2/drivers/video/asiliantfb.c
--- linux-2.6.18-rc1/drivers/video/asiliantfb.c	2006-07-15 22:34:43.173062148 +0000
+++ linux-2.6.18-rc2/drivers/video/asiliantfb.c	2006-07-15 22:34:48.457635779 +0000
@@ -34,7 +34,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff -urN linux-2.6.18-rc1/drivers/video/atafb.c linux-2.6.18-rc2/drivers/video/atafb.c
--- linux-2.6.18-rc1/drivers/video/atafb.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/video/atafb.c	2006-07-15 22:34:48.457635779 +0000
@@ -53,7 +53,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/init.h>
diff -urN linux-2.6.18-rc1/drivers/video/aty/aty128fb.c linux-2.6.18-rc2/drivers/video/aty/aty128fb.c
--- linux-2.6.18-rc1/drivers/video/aty/aty128fb.c	2006-07-15 22:34:43.173062148 +0000
+++ linux-2.6.18-rc2/drivers/video/aty/aty128fb.c	2006-07-15 22:34:48.457635779 +0000
@@ -52,7 +52,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
@@ -456,6 +455,7 @@
 static void wait_for_fifo(u16 entries, struct aty128fb_par *par);
 static void wait_for_idle(struct aty128fb_par *par);
 static u32 depth_to_dst(u32 depth);
+static void aty128_bl_set_power(struct fb_info *info, int power);
 
 #define BIOS_IN8(v)  	(readb(bios + (v)))
 #define BIOS_IN16(v) 	(readb(bios + (v)) | \
@@ -1258,25 +1258,11 @@
 		reg &= ~LVDS_DISPLAY_DIS;
 		aty_st_le32(LVDS_GEN_CNTL, reg);
 #ifdef CONFIG_FB_ATY128_BACKLIGHT
-		mutex_lock(&info->bl_mutex);
-		if (info->bl_dev) {
-			down(&info->bl_dev->sem);
-			info->bl_dev->props->update_status(info->bl_dev);
-			up(&info->bl_dev->sem);
-		}
-		mutex_unlock(&info->bl_mutex);
+		aty128_bl_set_power(info, FB_BLANK_UNBLANK);
 #endif	
 	} else {
 #ifdef CONFIG_FB_ATY128_BACKLIGHT
-		mutex_lock(&info->bl_mutex);
-		if (info->bl_dev) {
-			down(&info->bl_dev->sem);
-			info->bl_dev->props->brightness = 0;
-			info->bl_dev->props->power = FB_BLANK_POWERDOWN;
-			info->bl_dev->props->update_status(info->bl_dev);
-			up(&info->bl_dev->sem);
-		}
-		mutex_unlock(&info->bl_mutex);
+		aty128_bl_set_power(info, FB_BLANK_POWERDOWN);
 #endif	
 		reg = aty_ld_le32(LVDS_GEN_CNTL);
 		reg |= LVDS_DISPLAY_DIS;
@@ -1703,6 +1689,7 @@
 
 static struct backlight_properties aty128_bl_data;
 
+/* Call with fb_info->bl_mutex held */
 static int aty128_bl_get_level_brightness(struct aty128fb_par *par,
 		int level)
 {
@@ -1710,10 +1697,8 @@
 	int atylevel;
 
 	/* Get and convert the value */
-	mutex_lock(&info->bl_mutex);
 	atylevel = MAX_LEVEL -
 		(info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL);
-	mutex_unlock(&info->bl_mutex);
 
 	if (atylevel < 0)
 		atylevel = 0;
@@ -1731,7 +1716,8 @@
 /* That one prevents proper CRT output with LCD off */
 #undef BACKLIGHT_DAC_OFF
 
-static int aty128_bl_update_status(struct backlight_device *bd)
+/* Call with fb_info->bl_mutex held */
+static int __aty128_bl_update_status(struct backlight_device *bd)
 {
 	struct aty128fb_par *par = class_get_devdata(&bd->class_dev);
 	unsigned int reg = aty_ld_le32(LVDS_GEN_CNTL);
@@ -1784,6 +1770,19 @@
 	return 0;
 }
 
+static int aty128_bl_update_status(struct backlight_device *bd)
+{
+	struct aty128fb_par *par = class_get_devdata(&bd->class_dev);
+	struct fb_info *info = pci_get_drvdata(par->pdev);
+	int ret;
+
+	mutex_lock(&info->bl_mutex);
+	ret = __aty128_bl_update_status(bd);
+	mutex_unlock(&info->bl_mutex);
+
+	return ret;
+}
+
 static int aty128_bl_get_brightness(struct backlight_device *bd)
 {
 	return bd->props->brightness;
@@ -1796,6 +1795,16 @@
 	.max_brightness	= (FB_BACKLIGHT_LEVELS - 1),
 };
 
+static void aty128_bl_set_power(struct fb_info *info, int power)
+{
+	mutex_lock(&info->bl_mutex);
+	up(&info->bl_dev->sem);
+	info->bl_dev->props->power = power;
+	__aty128_bl_update_status(info->bl_dev);
+	down(&info->bl_dev->sem);
+	mutex_unlock(&info->bl_mutex);
+}
+
 static void aty128_bl_init(struct aty128fb_par *par)
 {
 	struct fb_info *info = pci_get_drvdata(par->pdev);
@@ -2198,12 +2207,8 @@
 		return 0;
 
 #ifdef CONFIG_FB_ATY128_BACKLIGHT
-	if (machine_is(powermac) && blank) {
-		down(&fb->bl_dev->sem);
-		fb->bl_dev->props->power = FB_BLANK_POWERDOWN;
-		fb->bl_dev->props->update_status(fb->bl_dev);
-		up(&fb->bl_dev->sem);
-	}
+	if (machine_is(powermac) && blank)
+		aty128_bl_set_power(fb, FB_BLANK_POWERDOWN);
 #endif
 
 	if (blank & FB_BLANK_VSYNC_SUSPEND)
@@ -2219,14 +2224,12 @@
 		aty128_set_crt_enable(par, par->crt_on && !blank);
 		aty128_set_lcd_enable(par, par->lcd_on && !blank);
 	}
+
 #ifdef CONFIG_FB_ATY128_BACKLIGHT
-	if (machine_is(powermac) && !blank) {
-		down(&fb->bl_dev->sem);
-		fb->bl_dev->props->power = FB_BLANK_UNBLANK;
-		fb->bl_dev->props->update_status(fb->bl_dev);
-		up(&fb->bl_dev->sem);
-	}
+	if (machine_is(powermac) && !blank)
+		aty128_bl_set_power(fb, FB_BLANK_UNBLANK);
 #endif
+
 	return 0;
 }
 
diff -urN linux-2.6.18-rc1/drivers/video/aty/atyfb_base.c linux-2.6.18-rc2/drivers/video/aty/atyfb_base.c
--- linux-2.6.18-rc1/drivers/video/aty/atyfb_base.c	2006-07-15 22:34:43.177062583 +0000
+++ linux-2.6.18-rc2/drivers/video/aty/atyfb_base.c	2006-07-15 22:34:48.461636213 +0000
@@ -2129,15 +2129,14 @@
 
 static struct backlight_properties aty_bl_data;
 
+/* Call with fb_info->bl_mutex held */
 static int aty_bl_get_level_brightness(struct atyfb_par *par, int level)
 {
 	struct fb_info *info = pci_get_drvdata(par->pdev);
 	int atylevel;
 
 	/* Get and convert the value */
-	mutex_lock(&info->bl_mutex);
 	atylevel = info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL;
-	mutex_unlock(&info->bl_mutex);
 
 	if (atylevel < 0)
 		atylevel = 0;
@@ -2147,7 +2146,8 @@
 	return atylevel;
 }
 
-static int aty_bl_update_status(struct backlight_device *bd)
+/* Call with fb_info->bl_mutex held */
+static int __aty_bl_update_status(struct backlight_device *bd)
 {
 	struct atyfb_par *par = class_get_devdata(&bd->class_dev);
 	unsigned int reg = aty_ld_lcd(LCD_MISC_CNTL, par);
@@ -2172,6 +2172,19 @@
 	return 0;
 }
 
+static int aty_bl_update_status(struct backlight_device *bd)
+{
+	struct atyfb_par *par = class_get_devdata(&bd->class_dev);
+	struct fb_info *info = pci_get_drvdata(par->pdev);
+	int ret;
+
+	mutex_lock(&info->bl_mutex);
+	ret = __aty_bl_update_status(bd);
+	mutex_unlock(&info->bl_mutex);
+
+	return ret;
+}
+
 static int aty_bl_get_brightness(struct backlight_device *bd)
 {
 	return bd->props->brightness;
@@ -2184,6 +2197,16 @@
 	.max_brightness = (FB_BACKLIGHT_LEVELS - 1),
 };
 
+static void aty_bl_set_power(struct fb_info *info, int power)
+{
+	mutex_lock(&info->bl_mutex);
+	up(&info->bl_dev->sem);
+	info->bl_dev->props->power = power;
+	__aty_bl_update_status(info->bl_dev);
+	down(&info->bl_dev->sem);
+	mutex_unlock(&info->bl_mutex);
+}
+
 static void aty_bl_init(struct atyfb_par *par)
 {
 	struct fb_info *info = pci_get_drvdata(par->pdev);
@@ -2790,16 +2813,8 @@
 		return 0;
 
 #ifdef CONFIG_PMAC_BACKLIGHT
-	if (machine_is(powermac) && blank > FB_BLANK_NORMAL) {
-		mutex_lock(&info->bl_mutex);
-		if (info->bl_dev) {
-			down(&info->bl_dev->sem);
-			info->bl_dev->props->power = FB_BLANK_POWERDOWN;
-			info->bl_dev->props->update_status(info->bl_dev);
-			up(&info->bl_dev->sem);
-		}
-		mutex_unlock(&info->bl_mutex);
-	}
+	if (machine_is(powermac) && blank > FB_BLANK_NORMAL)
+		aty_bl_set_power(info, FB_BLANK_POWERDOWN);
 #elif defined(CONFIG_FB_ATY_GENERIC_LCD)
 	if (par->lcd_table && blank > FB_BLANK_NORMAL &&
 	    (aty_ld_lcd(LCD_GEN_CNTL, par) & LCD_ON)) {
@@ -2830,16 +2845,8 @@
 	aty_st_le32(CRTC_GEN_CNTL, gen_cntl, par);
 
 #ifdef CONFIG_PMAC_BACKLIGHT
-	if (machine_is(powermac) && blank <= FB_BLANK_NORMAL) {
-		mutex_lock(&info->bl_mutex);
-		if (info->bl_dev) {
-			down(&info->bl_dev->sem);
-			info->bl_dev->props->power = FB_BLANK_UNBLANK;
-			info->bl_dev->props->update_status(info->bl_dev);
-			up(&info->bl_dev->sem);
-		}
-		mutex_unlock(&info->bl_mutex);
-	}
+	if (machine_is(powermac) && blank <= FB_BLANK_NORMAL)
+		aty_bl_set_power(info, FB_BLANK_UNBLANK);
 #elif defined(CONFIG_FB_ATY_GENERIC_LCD)
 	if (par->lcd_table && blank <= FB_BLANK_NORMAL &&
 	    (aty_ld_lcd(LCD_GEN_CNTL, par) & LCD_ON)) {
diff -urN linux-2.6.18-rc1/drivers/video/aty/radeon_base.c linux-2.6.18-rc2/drivers/video/aty/radeon_base.c
--- linux-2.6.18-rc1/drivers/video/aty/radeon_base.c	2006-07-15 22:34:43.177062583 +0000
+++ linux-2.6.18-rc2/drivers/video/aty/radeon_base.c	2006-07-15 22:34:48.461636213 +0000
@@ -58,7 +58,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/time.h>
diff -urN linux-2.6.18-rc1/drivers/video/chipsfb.c linux-2.6.18-rc2/drivers/video/chipsfb.c
--- linux-2.6.18-rc1/drivers/video/chipsfb.c	2006-07-15 22:34:43.181063017 +0000
+++ linux-2.6.18-rc2/drivers/video/chipsfb.c	2006-07-15 22:34:48.465636648 +0000
@@ -19,7 +19,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
@@ -150,12 +149,11 @@
 	mutex_lock(&pmac_backlight_mutex);
 
 	if (pmac_backlight) {
-		down(&pmac_backlight->sem);
-
 		/* used to disable backlight only for blank > 1, but it seems
 		 * useful at blank = 1 too (saves battery, extends backlight
 		 * life)
 	 	 */
+		down(&pmac_backlight->sem);
 		if (blank)
 			pmac_backlight->props->power = FB_BLANK_POWERDOWN;
 		else
diff -urN linux-2.6.18-rc1/drivers/video/cirrusfb.c linux-2.6.18-rc2/drivers/video/cirrusfb.c
--- linux-2.6.18-rc1/drivers/video/cirrusfb.c	2006-07-15 22:34:43.185063451 +0000
+++ linux-2.6.18-rc2/drivers/video/cirrusfb.c	2006-07-15 22:34:48.469637082 +0000
@@ -41,7 +41,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff -urN linux-2.6.18-rc1/drivers/video/console/dummycon.c linux-2.6.18-rc2/drivers/video/console/dummycon.c
--- linux-2.6.18-rc1/drivers/video/console/dummycon.c	2006-07-15 22:34:43.185063451 +0000
+++ linux-2.6.18-rc2/drivers/video/console/dummycon.c	2006-07-15 22:34:48.469637082 +0000
@@ -7,9 +7,9 @@
 
 #include <linux/types.h>
 #include <linux/kdev_t.h>
-#include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/vt_kern.h>
+#include <linux/screen_info.h>
 #include <linux/init.h>
 #include <linux/module.h>
 
diff -urN linux-2.6.18-rc1/drivers/video/console/fbcon.c linux-2.6.18-rc2/drivers/video/console/fbcon.c
--- linux-2.6.18-rc1/drivers/video/console/fbcon.c	2006-07-15 22:34:43.185063451 +0000
+++ linux-2.6.18-rc2/drivers/video/console/fbcon.c	2006-07-15 22:34:48.469637082 +0000
@@ -64,7 +64,6 @@
 #include <linux/fs.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>	/* MSch: for IRQ probe */
-#include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/string.h>
 #include <linux/kd.h>
diff -urN linux-2.6.18-rc1/drivers/video/console/mdacon.c linux-2.6.18-rc2/drivers/video/console/mdacon.c
--- linux-2.6.18-rc1/drivers/video/console/mdacon.c	2006-07-15 22:34:43.185063451 +0000
+++ linux-2.6.18-rc2/drivers/video/console/mdacon.c	2006-07-15 22:34:48.473637516 +0000
@@ -31,7 +31,6 @@
 #include <linux/fs.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/string.h>
 #include <linux/kd.h>
diff -urN linux-2.6.18-rc1/drivers/video/console/newport_con.c linux-2.6.18-rc2/drivers/video/console/newport_con.c
--- linux-2.6.18-rc1/drivers/video/console/newport_con.c	2006-07-15 22:34:43.189063885 +0000
+++ linux-2.6.18-rc2/drivers/video/console/newport_con.c	2006-07-15 22:34:48.473637516 +0000
@@ -12,7 +12,6 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
-#include <linux/tty.h>
 #include <linux/kd.h>
 #include <linux/selection.h>
 #include <linux/console.h>
diff -urN linux-2.6.18-rc1/drivers/video/console/promcon.c linux-2.6.18-rc2/drivers/video/console/promcon.c
--- linux-2.6.18-rc1/drivers/video/console/promcon.c	2006-07-15 22:34:43.189063885 +0000
+++ linux-2.6.18-rc2/drivers/video/console/promcon.c	2006-07-15 22:34:48.473637516 +0000
@@ -10,7 +10,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/console.h>
diff -urN linux-2.6.18-rc1/drivers/video/console/softcursor.c linux-2.6.18-rc2/drivers/video/console/softcursor.c
--- linux-2.6.18-rc1/drivers/video/console/softcursor.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/video/console/softcursor.c	2006-07-15 22:34:48.473637516 +0000
@@ -10,7 +10,6 @@
 
 #include <linux/module.h>
 #include <linux/string.h>
-#include <linux/tty.h>
 #include <linux/fb.h>
 #include <linux/slab.h>
 
diff -urN linux-2.6.18-rc1/drivers/video/console/sticon.c linux-2.6.18-rc2/drivers/video/console/sticon.c
--- linux-2.6.18-rc1/drivers/video/console/sticon.c	2006-07-15 22:34:43.189063885 +0000
+++ linux-2.6.18-rc2/drivers/video/console/sticon.c	2006-07-15 22:34:48.473637516 +0000
@@ -37,7 +37,6 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/errno.h>
 #include <linux/vt_kern.h>
diff -urN linux-2.6.18-rc1/drivers/video/console/vgacon.c linux-2.6.18-rc2/drivers/video/console/vgacon.c
--- linux-2.6.18-rc1/drivers/video/console/vgacon.c	2006-07-15 22:34:43.189063885 +0000
+++ linux-2.6.18-rc2/drivers/video/console/vgacon.c	2006-07-15 22:34:48.473637516 +0000
@@ -38,7 +38,6 @@
 #include <linux/sched.h>
 #include <linux/fs.h>
 #include <linux/kernel.h>
-#include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/string.h>
 #include <linux/kd.h>
@@ -48,6 +47,7 @@
 #include <linux/spinlock.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
+#include <linux/screen_info.h>
 #include <linux/smp_lock.h>
 #include <video/vga.h>
 #include <asm/io.h>
diff -urN linux-2.6.18-rc1/drivers/video/controlfb.c linux-2.6.18-rc2/drivers/video/controlfb.c
--- linux-2.6.18-rc1/drivers/video/controlfb.c	2006-07-15 22:34:43.189063885 +0000
+++ linux-2.6.18-rc2/drivers/video/controlfb.c	2006-07-15 22:34:48.473637516 +0000
@@ -36,7 +36,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff -urN linux-2.6.18-rc1/drivers/video/cyber2000fb.c linux-2.6.18-rc2/drivers/video/cyber2000fb.c
--- linux-2.6.18-rc1/drivers/video/cyber2000fb.c	2006-07-15 22:34:43.189063885 +0000
+++ linux-2.6.18-rc2/drivers/video/cyber2000fb.c	2006-07-15 22:34:48.473637516 +0000
@@ -41,7 +41,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff -urN linux-2.6.18-rc1/drivers/video/cyberfb.c linux-2.6.18-rc2/drivers/video/cyberfb.c
--- linux-2.6.18-rc1/drivers/video/cyberfb.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/video/cyberfb.c	2006-07-15 22:34:48.477637950 +0000
@@ -81,7 +81,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/zorro.h>
diff -urN linux-2.6.18-rc1/drivers/video/dnfb.c linux-2.6.18-rc2/drivers/video/dnfb.c
--- linux-2.6.18-rc1/drivers/video/dnfb.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/video/dnfb.c	2006-07-15 22:34:48.477637950 +0000
@@ -2,7 +2,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
diff -urN linux-2.6.18-rc1/drivers/video/epson1355fb.c linux-2.6.18-rc2/drivers/video/epson1355fb.c
--- linux-2.6.18-rc1/drivers/video/epson1355fb.c	2006-07-15 22:34:43.189063885 +0000
+++ linux-2.6.18-rc2/drivers/video/epson1355fb.c	2006-07-15 22:34:48.477637950 +0000
@@ -48,7 +48,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff -urN linux-2.6.18-rc1/drivers/video/fbcmap.c linux-2.6.18-rc2/drivers/video/fbcmap.c
--- linux-2.6.18-rc1/drivers/video/fbcmap.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/video/fbcmap.c	2006-07-15 22:34:48.477637950 +0000
@@ -13,7 +13,6 @@
 
 #include <linux/string.h>
 #include <linux/module.h>
-#include <linux/tty.h>
 #include <linux/fb.h>
 #include <linux/slab.h>
 
diff -urN linux-2.6.18-rc1/drivers/video/fbmem.c linux-2.6.18-rc2/drivers/video/fbmem.c
--- linux-2.6.18-rc1/drivers/video/fbmem.c	2006-07-15 22:34:43.193064320 +0000
+++ linux-2.6.18-rc2/drivers/video/fbmem.c	2006-07-15 22:34:48.477637950 +0000
@@ -23,7 +23,7 @@
 #include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/mman.h>
-#include <linux/tty.h>
+#include <linux/vt.h>
 #include <linux/init.h>
 #include <linux/linux_logo.h>
 #include <linux/proc_fs.h>
diff -urN linux-2.6.18-rc1/drivers/video/fbmon.c linux-2.6.18-rc2/drivers/video/fbmon.c
--- linux-2.6.18-rc1/drivers/video/fbmon.c	2006-07-15 22:34:43.193064320 +0000
+++ linux-2.6.18-rc2/drivers/video/fbmon.c	2006-07-15 22:34:48.477637950 +0000
@@ -26,7 +26,6 @@
  * for more details.
  *
  */
-#include <linux/tty.h>
 #include <linux/fb.h>
 #include <linux/module.h>
 #include <linux/pci.h>
diff -urN linux-2.6.18-rc1/drivers/video/g364fb.c linux-2.6.18-rc2/drivers/video/g364fb.c
--- linux-2.6.18-rc1/drivers/video/g364fb.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/video/g364fb.c	2006-07-15 22:34:48.481638385 +0000
@@ -21,7 +21,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff -urN linux-2.6.18-rc1/drivers/video/geode/gx1fb_core.c linux-2.6.18-rc2/drivers/video/geode/gx1fb_core.c
--- linux-2.6.18-rc1/drivers/video/geode/gx1fb_core.c	2006-07-15 22:34:43.193064320 +0000
+++ linux-2.6.18-rc2/drivers/video/geode/gx1fb_core.c	2006-07-15 22:34:48.481638385 +0000
@@ -15,7 +15,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff -urN linux-2.6.18-rc1/drivers/video/geode/gxfb_core.c linux-2.6.18-rc2/drivers/video/geode/gxfb_core.c
--- linux-2.6.18-rc1/drivers/video/geode/gxfb_core.c	2006-07-15 22:34:43.193064320 +0000
+++ linux-2.6.18-rc2/drivers/video/geode/gxfb_core.c	2006-07-15 22:34:48.481638385 +0000
@@ -25,7 +25,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff -urN linux-2.6.18-rc1/drivers/video/hgafb.c linux-2.6.18-rc2/drivers/video/hgafb.c
--- linux-2.6.18-rc1/drivers/video/hgafb.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/video/hgafb.c	2006-07-15 22:34:48.481638385 +0000
@@ -36,7 +36,6 @@
 #include <linux/spinlock.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff -urN linux-2.6.18-rc1/drivers/video/hitfb.c linux-2.6.18-rc2/drivers/video/hitfb.c
--- linux-2.6.18-rc1/drivers/video/hitfb.c	2006-07-15 22:34:43.193064320 +0000
+++ linux-2.6.18-rc2/drivers/video/hitfb.c	2006-07-15 22:34:48.481638385 +0000
@@ -17,7 +17,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/init.h>
diff -urN linux-2.6.18-rc1/drivers/video/hpfb.c linux-2.6.18-rc2/drivers/video/hpfb.c
--- linux-2.6.18-rc1/drivers/video/hpfb.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/video/hpfb.c	2006-07-15 22:34:48.481638385 +0000
@@ -11,7 +11,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/init.h>
diff -urN linux-2.6.18-rc1/drivers/video/i810/i810_main.c linux-2.6.18-rc2/drivers/video/i810/i810_main.c
--- linux-2.6.18-rc1/drivers/video/i810/i810_main.c	2006-07-15 22:34:43.197064754 +0000
+++ linux-2.6.18-rc2/drivers/video/i810/i810_main.c	2006-07-15 22:34:48.481638385 +0000
@@ -33,7 +33,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/fb.h>
 #include <linux/init.h>
diff -urN linux-2.6.18-rc1/drivers/video/igafb.c linux-2.6.18-rc2/drivers/video/igafb.c
--- linux-2.6.18-rc1/drivers/video/igafb.c	2006-07-15 22:34:43.197064754 +0000
+++ linux-2.6.18-rc2/drivers/video/igafb.c	2006-07-15 22:34:48.481638385 +0000
@@ -33,7 +33,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff -urN linux-2.6.18-rc1/drivers/video/imacfb.c linux-2.6.18-rc2/drivers/video/imacfb.c
--- linux-2.6.18-rc1/drivers/video/imacfb.c	2006-07-15 22:34:43.197064754 +0000
+++ linux-2.6.18-rc2/drivers/video/imacfb.c	2006-07-15 22:34:48.485638819 +0000
@@ -15,9 +15,9 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/screen_info.h>
 #include <linux/slab.h>
 #include <linux/string.h>
-#include <linux/tty.h>
 
 #include <asm/io.h>
 
diff -urN linux-2.6.18-rc1/drivers/video/imsttfb.c linux-2.6.18-rc2/drivers/video/imsttfb.c
--- linux-2.6.18-rc1/drivers/video/imsttfb.c	2006-07-15 22:34:43.197064754 +0000
+++ linux-2.6.18-rc2/drivers/video/imsttfb.c	2006-07-15 22:34:48.485638819 +0000
@@ -21,7 +21,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff -urN linux-2.6.18-rc1/drivers/video/intelfb/intelfbdrv.c linux-2.6.18-rc2/drivers/video/intelfb/intelfbdrv.c
--- linux-2.6.18-rc1/drivers/video/intelfb/intelfbdrv.c	2006-07-15 22:34:43.197064754 +0000
+++ linux-2.6.18-rc2/drivers/video/intelfb/intelfbdrv.c	2006-07-15 22:34:48.485638819 +0000
@@ -113,7 +113,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
@@ -122,6 +121,7 @@
 #include <linux/pci.h>
 #include <linux/vmalloc.h>
 #include <linux/pagemap.h>
+#include <linux/screen_info.h>
 
 #include <asm/io.h>
 
diff -urN linux-2.6.18-rc1/drivers/video/intelfb/intelfbhw.c linux-2.6.18-rc2/drivers/video/intelfb/intelfbhw.c
--- linux-2.6.18-rc1/drivers/video/intelfb/intelfbhw.c	2006-07-15 22:34:43.201065188 +0000
+++ linux-2.6.18-rc2/drivers/video/intelfb/intelfbhw.c	2006-07-15 22:34:48.485638819 +0000
@@ -24,7 +24,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff -urN linux-2.6.18-rc1/drivers/video/kyro/fbdev.c linux-2.6.18-rc2/drivers/video/kyro/fbdev.c
--- linux-2.6.18-rc1/drivers/video/kyro/fbdev.c	2006-07-15 22:34:43.201065188 +0000
+++ linux-2.6.18-rc2/drivers/video/kyro/fbdev.c	2006-07-15 22:34:48.485638819 +0000
@@ -16,7 +16,6 @@
 #include <linux/mm.h>
 #include <linux/errno.h>
 #include <linux/string.h>
-#include <linux/tty.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
 #include <linux/ioctl.h>
diff -urN linux-2.6.18-rc1/drivers/video/macfb.c linux-2.6.18-rc2/drivers/video/macfb.c
--- linux-2.6.18-rc1/drivers/video/macfb.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/video/macfb.c	2006-07-15 22:34:48.489639253 +0000
@@ -24,7 +24,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/nubus.h>
diff -urN linux-2.6.18-rc1/drivers/video/matrox/matroxfb_base.h linux-2.6.18-rc2/drivers/video/matrox/matroxfb_base.h
--- linux-2.6.18-rc1/drivers/video/matrox/matroxfb_base.h	2006-07-15 22:34:43.205065622 +0000
+++ linux-2.6.18-rc2/drivers/video/matrox/matroxfb_base.h	2006-07-15 22:34:48.489639253 +0000
@@ -30,7 +30,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff -urN linux-2.6.18-rc1/drivers/video/maxinefb.c linux-2.6.18-rc2/drivers/video/maxinefb.c
--- linux-2.6.18-rc1/drivers/video/maxinefb.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/video/maxinefb.c	2006-07-15 22:34:48.493639687 +0000
@@ -29,7 +29,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/init.h>
diff -urN linux-2.6.18-rc1/drivers/video/mbx/Makefile linux-2.6.18-rc2/drivers/video/mbx/Makefile
--- linux-2.6.18-rc1/drivers/video/mbx/Makefile	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/drivers/video/mbx/Makefile	2006-07-15 22:34:48.493639687 +0000
@@ -0,0 +1,4 @@
+# Makefile for the 2700G controller driver.
+
+obj-$(CONFIG_FB_MBX)	   += mbxfb.o
+obj-$(CONFIG_FB_MBX_DEBUG) += mbxfbdebugfs.o
diff -urN linux-2.6.18-rc1/drivers/video/mbx/mbxdebugfs.c linux-2.6.18-rc2/drivers/video/mbx/mbxdebugfs.c
--- linux-2.6.18-rc1/drivers/video/mbx/mbxdebugfs.c	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/drivers/video/mbx/mbxdebugfs.c	2006-07-15 22:34:48.493639687 +0000
@@ -0,0 +1,188 @@
+#include <linux/debugfs.h>
+
+#define BIG_BUFFER_SIZE	(1024)
+
+static char big_buffer[BIG_BUFFER_SIZE];
+
+struct mbxfb_debugfs_data {
+	struct dentry *dir;
+	struct dentry *sysconf;
+	struct dentry *clock;
+	struct dentry *display;
+	struct dentry *gsctl;
+};
+
+static int open_file_generic(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->u.generic_ip;
+	return 0;
+}
+
+static ssize_t write_file_dummy(struct file *file, const char __user *buf,
+				size_t count, loff_t *ppos)
+{
+	return count;
+}
+
+static ssize_t sysconf_read_file(struct file *file, char __user *userbuf,
+				 size_t count, loff_t *ppos)
+{
+	char * s = big_buffer;
+
+	s += sprintf(s, "SYSCFG = %08lx\n", SYSCFG);
+	s += sprintf(s, "PFBASE = %08lx\n", PFBASE);
+	s += sprintf(s, "PFCEIL = %08lx\n", PFCEIL);
+	s += sprintf(s, "POLLFLAG = %08lx\n", POLLFLAG);
+	s += sprintf(s, "SYSRST = %08lx\n", SYSRST);
+
+	return  simple_read_from_buffer(userbuf, count, ppos,
+					big_buffer, s-big_buffer);
+}
+
+
+static ssize_t gsctl_read_file(struct file *file, char __user *userbuf,
+			       size_t count, loff_t *ppos)
+{
+	char * s = big_buffer;
+
+	s += sprintf(s, "GSCTRL = %08lx\n", GSCTRL);
+	s += sprintf(s, "VSCTRL = %08lx\n", VSCTRL);
+	s += sprintf(s, "GBBASE = %08lx\n", GBBASE);
+	s += sprintf(s, "VBBASE = %08lx\n", VBBASE);
+	s += sprintf(s, "GDRCTRL = %08lx\n", GDRCTRL);
+	s += sprintf(s, "VCMSK = %08lx\n", VCMSK);
+	s += sprintf(s, "GSCADR = %08lx\n", GSCADR);
+	s += sprintf(s, "VSCADR = %08lx\n", VSCADR);
+	s += sprintf(s, "VUBASE = %08lx\n", VUBASE);
+	s += sprintf(s, "VVBASE = %08lx\n", VVBASE);
+	s += sprintf(s, "GSADR = %08lx\n", GSADR);
+	s += sprintf(s, "VSADR = %08lx\n", VSADR);
+	s += sprintf(s, "HCCTRL = %08lx\n", HCCTRL);
+	s += sprintf(s, "HCSIZE = %08lx\n", HCSIZE);
+	s += sprintf(s, "HCPOS = %08lx\n", HCPOS);
+	s += sprintf(s, "HCBADR = %08lx\n", HCBADR);
+	s += sprintf(s, "HCCKMSK = %08lx\n", HCCKMSK);
+	s += sprintf(s, "GPLUT = %08lx\n", GPLUT);
+
+	return  simple_read_from_buffer(userbuf, count, ppos,
+					big_buffer, s-big_buffer);
+}
+
+static ssize_t display_read_file(struct file *file, char __user *userbuf,
+				 size_t count, loff_t *ppos)
+{
+	char * s = big_buffer;
+
+	s += sprintf(s, "DSCTRL = %08lx\n", DSCTRL);
+	s += sprintf(s, "DHT01 = %08lx\n", DHT01);
+	s += sprintf(s, "DHT02 = %08lx\n", DHT02);
+	s += sprintf(s, "DHT03 = %08lx\n", DHT03);
+	s += sprintf(s, "DVT01 = %08lx\n", DVT01);
+	s += sprintf(s, "DVT02 = %08lx\n", DVT02);
+	s += sprintf(s, "DVT03 = %08lx\n", DVT03);
+	s += sprintf(s, "DBCOL = %08lx\n", DBCOL);
+	s += sprintf(s, "BGCOLOR = %08lx\n", BGCOLOR);
+	s += sprintf(s, "DINTRS = %08lx\n", DINTRS);
+	s += sprintf(s, "DINTRE = %08lx\n", DINTRE);
+	s += sprintf(s, "DINTRCNT = %08lx\n", DINTRCNT);
+	s += sprintf(s, "DSIG = %08lx\n", DSIG);
+	s += sprintf(s, "DMCTRL = %08lx\n", DMCTRL);
+	s += sprintf(s, "CLIPCTRL = %08lx\n", CLIPCTRL);
+	s += sprintf(s, "SPOCTRL = %08lx\n", SPOCTRL);
+	s += sprintf(s, "SVCTRL = %08lx\n", SVCTRL);
+	s += sprintf(s, "DLSTS = %08lx\n", DLSTS);
+	s += sprintf(s, "DLLCTRL = %08lx\n", DLLCTRL);
+	s += sprintf(s, "DVLNUM = %08lx\n", DVLNUM);
+	s += sprintf(s, "DUCTRL = %08lx\n", DUCTRL);
+	s += sprintf(s, "DVECTRL = %08lx\n", DVECTRL);
+	s += sprintf(s, "DHDET = %08lx\n", DHDET);
+	s += sprintf(s, "DVDET = %08lx\n", DVDET);
+	s += sprintf(s, "DODMSK = %08lx\n", DODMSK);
+	s += sprintf(s, "CSC01 = %08lx\n", CSC01);
+	s += sprintf(s, "CSC02 = %08lx\n", CSC02);
+	s += sprintf(s, "CSC03 = %08lx\n", CSC03);
+	s += sprintf(s, "CSC04 = %08lx\n", CSC04);
+	s += sprintf(s, "CSC05 = %08lx\n", CSC05);
+
+	return  simple_read_from_buffer(userbuf, count, ppos,
+					big_buffer, s-big_buffer);
+}
+
+static ssize_t clock_read_file(struct file *file, char __user *userbuf,
+			       size_t count, loff_t *ppos)
+{
+	char * s = big_buffer;
+
+	s += sprintf(s, "SYSCLKSRC = %08lx\n", SYSCLKSRC);
+	s += sprintf(s, "PIXCLKSRC = %08lx\n", PIXCLKSRC);
+	s += sprintf(s, "CLKSLEEP = %08lx\n", CLKSLEEP);
+	s += sprintf(s, "COREPLL = %08lx\n", COREPLL);
+	s += sprintf(s, "DISPPLL = %08lx\n", DISPPLL);
+	s += sprintf(s, "PLLSTAT = %08lx\n", PLLSTAT);
+	s += sprintf(s, "VOVRCLK = %08lx\n", VOVRCLK);
+	s += sprintf(s, "PIXCLK = %08lx\n", PIXCLK);
+	s += sprintf(s, "MEMCLK = %08lx\n", MEMCLK);
+	s += sprintf(s, "M24CLK = %08lx\n", M24CLK);
+	s += sprintf(s, "MBXCLK = %08lx\n", MBXCLK);
+	s += sprintf(s, "SDCLK = %08lx\n", SDCLK);
+	s += sprintf(s, "PIXCLKDIV = %08lx\n", PIXCLKDIV);
+
+	return  simple_read_from_buffer(userbuf, count, ppos,
+					big_buffer, s-big_buffer);
+}
+
+static struct file_operations sysconf_fops = {
+	.read = sysconf_read_file,
+	.write = write_file_dummy,
+	.open = open_file_generic,
+};
+
+static struct file_operations clock_fops = {
+	.read = clock_read_file,
+	.write = write_file_dummy,
+	.open = open_file_generic,
+};
+
+static struct file_operations display_fops = {
+	.read = display_read_file,
+	.write = write_file_dummy,
+	.open = open_file_generic,
+};
+
+static struct file_operations gsctl_fops = {
+	.read = gsctl_read_file,
+	.write = write_file_dummy,
+	.open = open_file_generic,
+};
+
+
+static void __devinit mbxfb_debugfs_init(struct fb_info *fbi)
+{
+	struct mbxfb_info *mfbi = fbi->par;
+	struct mbxfb_debugfs_data *dbg;
+
+	dbg = kzalloc(sizeof(struct mbxfb_debugfs_data), GFP_KERNEL);
+	mfbi->debugfs_data = dbg;
+
+	dbg->dir = debugfs_create_dir("mbxfb", NULL);
+	dbg->sysconf = debugfs_create_file("sysconf", 0444, dbg->dir,
+				      fbi, &sysconf_fops);
+	dbg->clock = debugfs_create_file("clock", 0444, dbg->dir,
+				    fbi, &clock_fops);
+	dbg->display = debugfs_create_file("display", 0444, dbg->dir,
+				      fbi, &display_fops);
+	dbg->gsctl = debugfs_create_file("gsctl", 0444, dbg->dir,
+				    fbi, &gsctl_fops);
+}
+
+static void __devexit mbxfb_debugfs_remove(struct fb_info *fbi)
+{
+	struct mbxfb_info *mfbi = fbi->par;
+	struct mbxfb_debugfs_data *dbg = mfbi->debugfs_data;
+
+	debugfs_remove(dbg->gsctl);
+	debugfs_remove(dbg->display);
+	debugfs_remove(dbg->clock);
+	debugfs_remove(dbg->sysconf);
+	debugfs_remove(dbg->dir);
+}
diff -urN linux-2.6.18-rc1/drivers/video/mbx/mbxfb.c linux-2.6.18-rc2/drivers/video/mbx/mbxfb.c
--- linux-2.6.18-rc1/drivers/video/mbx/mbxfb.c	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/drivers/video/mbx/mbxfb.c	2006-07-15 22:34:48.493639687 +0000
@@ -0,0 +1,683 @@
+/*
+ *  linux/drivers/video/mbx/mbxfb.c
+ *
+ *  Copyright (C) 2006 Compulab, Ltd.
+ *  Mike Rapoport <mike@compulab.co.il>
+ *
+ *   Based on pxafb.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ *   Intel 2700G (Marathon) Graphics Accelerator Frame Buffer Driver
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+
+#include <video/mbxfb.h>
+
+#include "regs.h"
+#include "reg_bits.h"
+
+static unsigned long virt_base_2700;
+
+#define MIN_XRES	16
+#define MIN_YRES	16
+#define MAX_XRES	2048
+#define MAX_YRES	2048
+
+#define MAX_PALETTES	16
+
+/* FIXME: take care of different chip revisions with different sizes
+   of ODFB */
+#define MEMORY_OFFSET	0x60000
+
+struct mbxfb_info {
+	struct device *dev;
+
+	struct resource *fb_res;
+	struct resource *fb_req;
+
+	struct resource *reg_res;
+	struct resource *reg_req;
+
+	void __iomem *fb_virt_addr;
+	unsigned long fb_phys_addr;
+
+	void __iomem *reg_virt_addr;
+	unsigned long reg_phys_addr;
+
+	int (*platform_probe) (struct fb_info * fb);
+	int (*platform_remove) (struct fb_info * fb);
+
+	u32 pseudo_palette[MAX_PALETTES];
+#ifdef CONFIG_FB_MBX_DEBUG
+	void *debugfs_data;
+#endif
+
+};
+
+static struct fb_var_screeninfo mbxfb_default __devinitdata = {
+	.xres = 640,
+	.yres = 480,
+	.xres_virtual = 640,
+	.yres_virtual = 480,
+	.bits_per_pixel = 16,
+	.red = {11, 5, 0},
+	.green = {5, 6, 0},
+	.blue = {0, 5, 0},
+	.activate = FB_ACTIVATE_TEST,
+	.height = -1,
+	.width = -1,
+	.pixclock = 40000,
+	.left_margin = 48,
+	.right_margin = 16,
+	.upper_margin = 33,
+	.lower_margin = 10,
+	.hsync_len = 96,
+	.vsync_len = 2,
+	.vmode = FB_VMODE_NONINTERLACED,
+	.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct fb_fix_screeninfo mbxfb_fix  __devinitdata = {
+	.id = "MBX",
+	.type = FB_TYPE_PACKED_PIXELS,
+	.visual = FB_VISUAL_TRUECOLOR,
+	.xpanstep = 0,
+	.ypanstep = 0,
+	.ywrapstep = 0,
+	.accel = FB_ACCEL_NONE,
+};
+
+struct pixclock_div {
+	u8 m;
+	u8 n;
+	u8 p;
+};
+
+static unsigned int mbxfb_get_pixclock(unsigned int pixclock_ps,
+				       struct pixclock_div *div)
+{
+	u8 m, n, p;
+	unsigned int err = 0;
+	unsigned int min_err = ~0x0;
+	unsigned int clk;
+	unsigned int best_clk = 0;
+	unsigned int ref_clk = 13000;	/* FIXME: take from platform data */
+	unsigned int pixclock;
+
+	/* convert pixclock to KHz */
+	pixclock = PICOS2KHZ(pixclock_ps);
+
+	for (m = 1; m < 64; m++) {
+		for (n = 1; n < 8; n++) {
+			for (p = 0; p < 8; p++) {
+				clk = (ref_clk * m) / (n * (1 << p));
+				err = (clk > pixclock) ? (clk - pixclock) :
+					(pixclock - clk);
+				if (err < min_err) {
+					min_err = err;
+					best_clk = clk;
+					div->m = m;
+					div->n = n;
+					div->p = p;
+				}
+			}
+		}
+	}
+	return KHZ2PICOS(best_clk);
+}
+
+static int mbxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+			   u_int trans, struct fb_info *info)
+{
+	u32 val, ret = 1;
+
+	if (regno < MAX_PALETTES) {
+		u32 *pal = info->pseudo_palette;
+
+		val = (red & 0xf800) | ((green & 0xfc00) >> 5) |
+			((blue & 0xf800) >> 11);
+		pal[regno] = val;
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static int mbxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+	struct pixclock_div div;
+
+	var->pixclock = mbxfb_get_pixclock(var->pixclock, &div);
+
+	if (var->xres < MIN_XRES)
+		var->xres = MIN_XRES;
+	if (var->yres < MIN_YRES)
+		var->yres = MIN_YRES;
+	if (var->xres > MAX_XRES)
+		return -EINVAL;
+	if (var->yres > MAX_YRES)
+		return -EINVAL;
+	var->xres_virtual = max(var->xres_virtual, var->xres);
+	var->yres_virtual = max(var->yres_virtual, var->yres);
+
+	switch (var->bits_per_pixel) {
+		/* 8 bits-per-pixel is not supported yet */
+	case 8:
+		return -EINVAL;
+	case 16:
+		var->green.length = (var->green.length == 5) ? 5 : 6;
+		var->red.length = 5;
+		var->blue.length = 5;
+		var->transp.length = 6 - var->green.length;
+		var->blue.offset = 0;
+		var->green.offset = 5;
+		var->red.offset = 5 + var->green.length;
+		var->transp.offset = (5 + var->red.offset) & 15;
+		break;
+	case 24:		/* RGB 888   */
+	case 32:		/* RGBA 8888 */
+		var->red.offset = 16;
+		var->red.length = 8;
+		var->green.offset = 8;
+		var->green.length = 8;
+		var->blue.offset = 0;
+		var->blue.length = 8;
+		var->transp.length = var->bits_per_pixel - 24;
+		var->transp.offset = (var->transp.length) ? 24 : 0;
+		break;
+	}
+	var->red.msb_right = 0;
+	var->green.msb_right = 0;
+	var->blue.msb_right = 0;
+	var->transp.msb_right = 0;
+
+	return 0;
+}
+
+static int mbxfb_set_par(struct fb_info *info)
+{
+	struct fb_var_screeninfo *var = &info->var;
+	struct pixclock_div div;
+	ushort hbps, ht, hfps, has;
+	ushort vbps, vt, vfps, vas;
+	u32 gsctrl = readl(GSCTRL);
+	u32 gsadr = readl(GSADR);
+
+	info->fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
+
+	/* setup color mode */
+	gsctrl &= ~(FMsk(GSCTRL_GPIXFMT));
+	/* FIXME: add *WORKING* support for 8-bits per color */
+	if (info->var.bits_per_pixel == 8) {
+		return -EINVAL;
+	} else {
+		fb_dealloc_cmap(&info->cmap);
+		gsctrl &= ~GSCTRL_LUT_EN;
+
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+		switch (info->var.bits_per_pixel) {
+		case 16:
+			if (info->var.green.length == 5)
+				gsctrl |= GSCTRL_GPIXFMT_ARGB1555;
+			else
+				gsctrl |= GSCTRL_GPIXFMT_RGB565;
+			break;
+		case 24:
+			gsctrl |= GSCTRL_GPIXFMT_RGB888;
+			break;
+		case 32:
+			gsctrl |= GSCTRL_GPIXFMT_ARGB8888;
+			break;
+		}
+	}
+
+	/* setup resolution */
+	gsctrl &= ~(FMsk(GSCTRL_GSWIDTH) | FMsk(GSCTRL_GSHEIGHT));
+	gsctrl |= Gsctrl_Width(info->var.xres - 1) |
+		Gsctrl_Height(info->var.yres - 1);
+	writel(gsctrl, GSCTRL);
+	udelay(1000);
+
+	gsadr &= ~(FMsk(GSADR_SRCSTRIDE));
+	gsadr |= Gsadr_Srcstride(info->var.xres * info->var.bits_per_pixel /
+				 (8 * 16) - 1);
+	writel(gsadr, GSADR);
+	udelay(1000);
+
+	/* setup timings */
+	var->pixclock = mbxfb_get_pixclock(info->var.pixclock, &div);
+
+	writel((Disp_Pll_M(div.m) | Disp_Pll_N(div.n) |
+		Disp_Pll_P(div.p) | DISP_PLL_EN), DISPPLL);
+
+	hbps = var->hsync_len;
+	has = hbps + var->left_margin;
+	hfps = has + var->xres;
+	ht = hfps + var->right_margin;
+
+	vbps = var->vsync_len;
+	vas = vbps + var->upper_margin;
+	vfps = vas + var->yres;
+	vt = vfps + var->lower_margin;
+
+	writel((Dht01_Hbps(hbps) | Dht01_Ht(ht)), DHT01);
+	writel((Dht02_Hlbs(has) | Dht02_Has(has)), DHT02);
+	writel((Dht03_Hfps(hfps) | Dht03_Hrbs(hfps)), DHT03);
+	writel((Dhdet_Hdes(has) | Dhdet_Hdef(hfps)), DHDET);
+
+	writel((Dvt01_Vbps(vbps) | Dvt01_Vt(vt)), DVT01);
+	writel((Dvt02_Vtbs(vas) | Dvt02_Vas(vas)), DVT02);
+	writel((Dvt03_Vfps(vfps) | Dvt03_Vbbs(vfps)), DVT03);
+	writel((Dvdet_Vdes(vas) | Dvdet_Vdef(vfps)), DVDET);
+	writel((Dvectrl_Vevent(vfps) | Dvectrl_Vfetch(vbps)), DVECTRL);
+
+	writel((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
+
+	return 0;
+}
+
+static int mbxfb_blank(int blank, struct fb_info *info)
+{
+	switch (blank) {
+	case FB_BLANK_POWERDOWN:
+	case FB_BLANK_VSYNC_SUSPEND:
+	case FB_BLANK_HSYNC_SUSPEND:
+	case FB_BLANK_NORMAL:
+		writel((readl(DSCTRL) & ~DSCTRL_SYNCGEN_EN), DSCTRL);
+		udelay(1000);
+		writel((readl(PIXCLK) & ~PIXCLK_EN), PIXCLK);
+		udelay(1000);
+		writel((readl(VOVRCLK) & ~VOVRCLK_EN), VOVRCLK);
+		udelay(1000);
+		break;
+	case FB_BLANK_UNBLANK:
+		writel((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
+		udelay(1000);
+		writel((readl(PIXCLK) | PIXCLK_EN), PIXCLK);
+		udelay(1000);
+		break;
+	}
+	return 0;
+}
+
+static struct fb_ops mbxfb_ops = {
+	.owner = THIS_MODULE,
+	.fb_check_var = mbxfb_check_var,
+	.fb_set_par = mbxfb_set_par,
+	.fb_setcolreg = mbxfb_setcolreg,
+	.fb_fillrect = cfb_fillrect,
+	.fb_copyarea = cfb_copyarea,
+	.fb_imageblit = cfb_imageblit,
+	.fb_blank = mbxfb_blank,
+};
+
+/*
+  Enable external SDRAM controller. Assume that all clocks are active
+  by now.
+*/
+static void __devinit setup_memc(struct fb_info *fbi)
+{
+	struct mbxfb_info *mfbi = fbi->par;
+	unsigned long tmp;
+	int i;
+
+	/* FIXME: use platfrom specific parameters */
+	/* setup SDRAM controller */
+	writel((LMCFG_LMC_DS | LMCFG_LMC_TS | LMCFG_LMD_TS |
+		LMCFG_LMA_TS),
+	       LMCFG);
+	udelay(1000);
+
+	writel(LMPWR_MC_PWR_ACT, LMPWR);
+	udelay(1000);
+
+	/* setup SDRAM timings */
+	writel((Lmtim_Tras(7) | Lmtim_Trp(3) | Lmtim_Trcd(3) |
+		Lmtim_Trc(9) | Lmtim_Tdpl(2)),
+	       LMTIM);
+	udelay(1000);
+	/* setup SDRAM refresh rate */
+	writel(0xc2b, LMREFRESH);
+	udelay(1000);
+	/* setup SDRAM type parameters */
+	writel((LMTYPE_CASLAT_3 | LMTYPE_BKSZ_2 | LMTYPE_ROWSZ_11 |
+		LMTYPE_COLSZ_8),
+	       LMTYPE);
+	udelay(1000);
+	/* enable memory controller */
+	writel(LMPWR_MC_PWR_ACT, LMPWR);
+	udelay(1000);
+
+	/* perform dummy reads */
+	for ( i = 0; i < 16; i++ ) {
+		tmp = readl(fbi->screen_base);
+	}
+}
+
+static void enable_clocks(struct fb_info *fbi)
+{
+	/* enable clocks */
+	writel(SYSCLKSRC_PLL_2, SYSCLKSRC);
+	udelay(1000);
+	writel(PIXCLKSRC_PLL_1, PIXCLKSRC);
+	udelay(1000);
+	writel(0x00000000, CLKSLEEP);
+	udelay(1000);
+	writel((Core_Pll_M(0x17) | Core_Pll_N(0x3) | Core_Pll_P(0x0) |
+		CORE_PLL_EN),
+	       COREPLL);
+	udelay(1000);
+	writel((Disp_Pll_M(0x1b) | Disp_Pll_N(0x7) | Disp_Pll_P(0x1) |
+		DISP_PLL_EN),
+	       DISPPLL);
+
+	writel(0x00000000, VOVRCLK);
+	udelay(1000);
+	writel(PIXCLK_EN, PIXCLK);
+	udelay(1000);
+	writel(MEMCLK_EN, MEMCLK);
+	udelay(1000);
+	writel(0x00000006, M24CLK);
+	udelay(1000);
+	writel(0x00000006, MBXCLK);
+	udelay(1000);
+	writel(SDCLK_EN, SDCLK);
+	udelay(1000);
+	writel(0x00000001, PIXCLKDIV);
+	udelay(1000);
+}
+
+static void __devinit setup_graphics(struct fb_info *fbi)
+{
+	unsigned long gsctrl;
+
+	gsctrl = GSCTRL_GAMMA_EN | Gsctrl_Width(fbi->var.xres - 1) |
+		Gsctrl_Height(fbi->var.yres - 1);
+	switch (fbi->var.bits_per_pixel) {
+	case 16:
+		if (fbi->var.green.length == 5)
+			gsctrl |= GSCTRL_GPIXFMT_ARGB1555;
+		else
+			gsctrl |= GSCTRL_GPIXFMT_RGB565;
+		break;
+	case 24:
+		gsctrl |= GSCTRL_GPIXFMT_RGB888;
+		break;
+	case 32:
+		gsctrl |= GSCTRL_GPIXFMT_ARGB8888;
+		break;
+	}
+
+	writel(gsctrl, GSCTRL);
+	udelay(1000);
+	writel(0x00000000, GBBASE);
+	udelay(1000);
+	writel(0x00ffffff, GDRCTRL);
+	udelay(1000);
+	writel((GSCADR_STR_EN | Gscadr_Gbase_Adr(0x6000)), GSCADR);
+	udelay(1000);
+	writel(0x00000000, GPLUT);
+	udelay(1000);
+}
+
+static void __devinit setup_display(struct fb_info *fbi)
+{
+	unsigned long dsctrl = 0;
+
+	dsctrl = DSCTRL_BLNK_POL;
+	if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT)
+		dsctrl |= DSCTRL_HS_POL;
+	if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
+		dsctrl |= DSCTRL_VS_POL;
+	writel(dsctrl, DSCTRL);
+	udelay(1000);
+	writel(0xd0303010, DMCTRL);
+	udelay(1000);
+	writel((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
+}
+
+static void __devinit enable_controller(struct fb_info *fbi)
+{
+	writel(SYSRST_RST, SYSRST);
+	udelay(1000);
+
+
+	enable_clocks(fbi);
+	setup_memc(fbi);
+	setup_graphics(fbi);
+	setup_display(fbi);
+}
+
+#ifdef CONFIG_PM
+/*
+ * Power management hooks.  Note that we won't be called from IRQ context,
+ * unlike the blank functions above, so we may sleep.
+ */
+static int mbxfb_suspend(struct platform_device *dev, pm_message_t state)
+{
+	/* make frame buffer memory enter self-refresh mode */
+	writel(LMPWR_MC_PWR_SRM, LMPWR);
+	while (LMPWRSTAT != LMPWRSTAT_MC_PWR_SRM)
+		; /* empty statement */
+
+	/* reset the device, since it's initial state is 'mostly sleeping' */
+	writel(SYSRST_RST, SYSRST);
+	return 0;
+}
+
+static int mbxfb_resume(struct platform_device *dev)
+{
+	struct fb_info *fbi = platform_get_drvdata(dev);
+
+	enable_clocks(fbi);
+/* 	setup_graphics(fbi); */
+/* 	setup_display(fbi); */
+
+	writel((readl(DSCTRL) | DSCTRL_SYNCGEN_EN), DSCTRL);
+	return 0;
+}
+#else
+#define mbxfb_suspend	NULL
+#define mbxfb_resume	NULL
+#endif
+
+/* debugfs entries */
+#ifndef CONFIG_FB_MBX_DEBUG
+#define mbxfb_debugfs_init(x)	do {} while(0)
+#define mbxfb_debugfs_remove(x)	do {} while(0)
+#endif
+
+#define res_size(_r) (((_r)->end - (_r)->start) + 1)
+
+static int __devinit mbxfb_probe(struct platform_device *dev)
+{
+	int ret;
+	struct fb_info *fbi;
+	struct mbxfb_info *mfbi;
+	struct mbxfb_platform_data *pdata;
+
+	dev_dbg(dev, "mbxfb_probe\n");
+
+	fbi = framebuffer_alloc(sizeof(struct mbxfb_info), &dev->dev);
+	if (fbi == NULL) {
+		dev_err(&dev->dev, "framebuffer_alloc failed\n");
+		return -ENOMEM;
+	}
+
+	mfbi = fbi->par;
+	fbi->pseudo_palette = mfbi->pseudo_palette;
+	pdata = dev->dev.platform_data;
+	if (pdata->probe)
+		mfbi->platform_probe = pdata->probe;
+	if (pdata->remove)
+		mfbi->platform_remove = pdata->remove;
+
+	mfbi->fb_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	mfbi->reg_res = platform_get_resource(dev, IORESOURCE_MEM, 1);
+
+	if (!mfbi->fb_res || !mfbi->reg_res) {
+		dev_err(&dev->dev, "no resources found\n");
+		ret = -ENODEV;
+		goto err1;
+	}
+
+	mfbi->fb_req = request_mem_region(mfbi->fb_res->start,
+					  res_size(mfbi->fb_res), dev->name);
+	if (mfbi->fb_req == NULL) {
+		dev_err(&dev->dev, "failed to claim framebuffer memory\n");
+		ret = -EINVAL;
+		goto err1;
+	}
+	mfbi->fb_phys_addr = mfbi->fb_res->start;
+
+	mfbi->reg_req = request_mem_region(mfbi->reg_res->start,
+					   res_size(mfbi->reg_res), dev->name);
+	if (mfbi->reg_req == NULL) {
+		dev_err(&dev->dev, "failed to claim Marathon registers\n");
+		ret = -EINVAL;
+		goto err2;
+	}
+	mfbi->reg_phys_addr = mfbi->reg_res->start;
+
+	mfbi->reg_virt_addr = ioremap_nocache(mfbi->reg_phys_addr,
+					      res_size(mfbi->reg_req));
+	if (!mfbi->reg_virt_addr) {
+		dev_err(&dev->dev, "failed to ioremap Marathon registers\n");
+		ret = -EINVAL;
+		goto err3;
+	}
+	virt_base_2700 = (unsigned long)mfbi->reg_virt_addr;
+
+	mfbi->fb_virt_addr = ioremap_nocache(mfbi->fb_phys_addr,
+					     res_size(mfbi->fb_req));
+	if (!mfbi->reg_virt_addr) {
+		dev_err(&dev->dev, "failed to ioremap frame buffer\n");
+		ret = -EINVAL;
+		goto err4;
+	}
+
+	/* FIXME: get from platform */
+	fbi->screen_base = (char __iomem *)(mfbi->fb_virt_addr + 0x60000);
+	fbi->screen_size = 8 * 1024 * 1024;	/* 8 Megs */
+	fbi->fbops = &mbxfb_ops;
+
+	fbi->var = mbxfb_default;
+	fbi->fix = mbxfb_fix;
+	fbi->fix.smem_start = mfbi->fb_phys_addr + 0x60000;
+	fbi->fix.smem_len = 8 * 1024 * 1024;
+	fbi->fix.line_length = 640 * 2;
+
+	ret = fb_alloc_cmap(&fbi->cmap, 256, 0);
+	if (ret < 0) {
+		dev_err(&dev->dev, "fb_alloc_cmap failed\n");
+		ret = -EINVAL;
+		goto err5;
+	}
+
+	platform_set_drvdata(dev, fbi);
+
+	printk(KERN_INFO "fb%d: mbx frame buffer device\n", fbi->node);
+
+	if (mfbi->platform_probe)
+		mfbi->platform_probe(fbi);
+
+	enable_controller(fbi);
+
+	mbxfb_debugfs_init(fbi);
+
+	ret = register_framebuffer(fbi);
+	if (ret < 0) {
+		dev_err(&dev->dev, "register_framebuffer failed\n");
+		ret = -EINVAL;
+		goto err6;
+	}
+
+	return 0;
+
+err6:
+	fb_dealloc_cmap(&fbi->cmap);
+err5:
+	iounmap(mfbi->fb_virt_addr);
+err4:
+	iounmap(mfbi->reg_virt_addr);
+err3:
+	release_mem_region(mfbi->reg_res->start, res_size(mfbi->reg_res));
+err2:
+	release_mem_region(mfbi->fb_res->start, res_size(mfbi->fb_res));
+err1:
+	framebuffer_release(fbi);
+
+	return ret;
+}
+
+static int __devexit mbxfb_remove(struct platform_device *dev)
+{
+	struct fb_info *fbi = platform_get_drvdata(dev);
+
+	writel(SYSRST_RST, SYSRST);
+	udelay(1000);
+
+	mbxfb_debugfs_remove(fbi);
+
+	if (fbi) {
+		struct mbxfb_info *mfbi = fbi->par;
+
+		unregister_framebuffer(fbi);
+		if (mfbi) {
+			if (mfbi->platform_remove)
+				mfbi->platform_remove(fbi);
+
+			if (mfbi->fb_virt_addr)
+				iounmap(mfbi->fb_virt_addr);
+			if (mfbi->reg_virt_addr)
+				iounmap(mfbi->reg_virt_addr);
+			if (mfbi->reg_req)
+				release_mem_region(mfbi->reg_req->start,
+						   res_size(mfbi->reg_req));
+			if (mfbi->fb_req)
+				release_mem_region(mfbi->fb_req->start,
+						   res_size(mfbi->fb_req));
+		}
+		framebuffer_release(fbi);
+	}
+
+	return 0;
+}
+
+static struct platform_driver mbxfb_driver = {
+	.probe = mbxfb_probe,
+	.remove = mbxfb_remove,
+	.suspend = mbxfb_suspend,
+	.resume = mbxfb_resume,
+	.driver = {
+		.name = "mbx-fb",
+	},
+};
+
+int __devinit mbxfb_init(void)
+{
+	return platform_driver_register(&mbxfb_driver);
+}
+
+static void __devexit mbxfb_exit(void)
+{
+	platform_driver_unregister(&mbxfb_driver);
+}
+
+module_init(mbxfb_init);
+module_exit(mbxfb_exit);
+
+MODULE_DESCRIPTION("loadable framebuffer driver for Marathon device");
+MODULE_AUTHOR("Mike Rapoport, Compulab");
+MODULE_LICENSE("GPL");
diff -urN linux-2.6.18-rc1/drivers/video/mbx/reg_bits.h linux-2.6.18-rc2/drivers/video/mbx/reg_bits.h
--- linux-2.6.18-rc1/drivers/video/mbx/reg_bits.h	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/drivers/video/mbx/reg_bits.h	2006-07-15 22:34:48.493639687 +0000
@@ -0,0 +1,418 @@
+#ifndef __REG_BITS_2700G_
+#define __REG_BITS_2700G_
+
+/* use defines from asm-arm/arch-pxa/bitfields.h for bit fields access */
+#define UData(Data)	((unsigned long) (Data))
+#define Fld(Size, Shft)	(((Size) << 16) + (Shft))
+#define FSize(Field)	((Field) >> 16)
+#define FShft(Field)	((Field) & 0x0000FFFF)
+#define FMsk(Field)	(((UData (1) << FSize (Field)) - 1) << FShft (Field))
+#define FAlnMsk(Field)	((UData (1) << FSize (Field)) - 1)
+#define F1stBit(Field)	(UData (1) << FShft (Field))
+
+#define SYSRST_RST	(1 << 0)
+
+/* SYSCLKSRC - SYSCLK Source Control Register */
+#define SYSCLKSRC_SEL	Fld(2,0)
+#define SYSCLKSRC_REF	((0x0) << FShft(SYSCLKSRC_SEL))
+#define SYSCLKSRC_PLL_1	((0x1) << FShft(SYSCLKSRC_SEL))
+#define SYSCLKSRC_PLL_2	((0x2) << FShft(SYSCLKSRC_SEL))
+
+/* PIXCLKSRC - PIXCLK Source Control Register */
+#define PIXCLKSRC_SEL	Fld(2,0)
+#define PIXCLKSRC_REF	((0x0) << FShft(PIXCLKSRC_SEL))
+#define PIXCLKSRC_PLL_1	((0x1) << FShft(PIXCLKSRC_SEL))
+#define PIXCLKSRC_PLL_2	((0x2) << FShft(PIXCLKSRC_SEL))
+
+/* Clock Disable Register */
+#define CLKSLEEP_SLP	(1 << 0)
+
+/* Core PLL Control Register */
+#define CORE_PLL_M	Fld(6,7)
+#define Core_Pll_M(x)	((x) << FShft(CORE_PLL_M))
+#define CORE_PLL_N	Fld(3,4)
+#define Core_Pll_N(x)	((x) << FShft(CORE_PLL_N))
+#define CORE_PLL_P	Fld(3,1)
+#define Core_Pll_P(x)	((x) << FShft(CORE_PLL_P))
+#define CORE_PLL_EN	(1 << 0)
+
+/* Display PLL Control Register */
+#define DISP_PLL_M	Fld(6,7)
+#define Disp_Pll_M(x)	((x) << FShft(DISP_PLL_M))
+#define DISP_PLL_N	Fld(3,4)
+#define Disp_Pll_N(x)	((x) << FShft(DISP_PLL_N))
+#define DISP_PLL_P	Fld(3,1)
+#define Disp_Pll_P(x)	((x) << FShft(DISP_PLL_P))
+#define DISP_PLL_EN	(1 << 0)
+
+/* PLL status register */
+#define PLLSTAT_CORE_PLL_LOST_L	(1 << 3)
+#define PLLSTAT_CORE_PLL_LSTS	(1 << 2)
+#define PLLSTAT_DISP_PLL_LOST_L	(1 << 1)
+#define PLLSTAT_DISP_PLL_LSTS	(1 << 0)
+
+/* Video and scale clock control register */
+#define VOVRCLK_EN	(1 << 0)
+
+/* Pixel clock control register */
+#define PIXCLK_EN	(1 << 0)
+
+/* Memory clock control register */
+#define MEMCLK_EN	(1 << 0)
+
+/* MBX clock control register */
+#define MBXCLK_DIV	Fld(2,2)
+#define MBXCLK_DIV_1	((0x0) << FShft(MBXCLK_DIV))
+#define MBXCLK_DIV_2	((0x1) << FShft(MBXCLK_DIV))
+#define MBXCLK_DIV_3	((0x2) << FShft(MBXCLK_DIV))
+#define MBXCLK_DIV_4	((0x3) << FShft(MBXCLK_DIV))
+#define MBXCLK_EN	Fld(2,0)
+#define MBXCLK_EN_NONE	((0x0) << FShft(MBXCLK_EN))
+#define MBXCLK_EN_2D	((0x1) << FShft(MBXCLK_EN))
+#define MBXCLK_EN_BOTH	((0x2) << FShft(MBXCLK_EN))
+
+/* M24 clock control register */
+#define M24CLK_DIV	Fld(2,1)
+#define M24CLK_DIV_1	((0x0) << FShft(M24CLK_DIV))
+#define M24CLK_DIV_2	((0x1) << FShft(M24CLK_DIV))
+#define M24CLK_DIV_3	((0x2) << FShft(M24CLK_DIV))
+#define M24CLK_DIV_4	((0x3) << FShft(M24CLK_DIV))
+#define M24CLK_EN	(1 << 0)
+
+/* SDRAM clock control register */
+#define SDCLK_EN	(1 << 0)
+
+/* PixClk Divisor Register */
+#define PIXCLKDIV_PD	Fld(9,0)
+#define Pixclkdiv_Pd(x)	((x) << FShft(PIXCLKDIV_PD))
+
+/* LCD Config control register */
+#define LCDCFG_IN_FMT	Fld(3,28)
+#define Lcdcfg_In_Fmt(x)	((x) << FShft(LCDCFG_IN_FMT))
+#define LCDCFG_LCD1DEN_POL	(1 << 27)
+#define LCDCFG_LCD1FCLK_POL	(1 << 26)
+#define LCDCFG_LCD1LCLK_POL	(1 << 25)
+#define LCDCFG_LCD1D_POL	(1 << 24)
+#define LCDCFG_LCD2DEN_POL	(1 << 23)
+#define LCDCFG_LCD2FCLK_POL	(1 << 22)
+#define LCDCFG_LCD2LCLK_POL	(1 << 21)
+#define LCDCFG_LCD2D_POL	(1 << 20)
+#define LCDCFG_LCD1_TS		(1 << 19)
+#define LCDCFG_LCD1D_DS		(1 << 18)
+#define LCDCFG_LCD1C_DS		(1 << 17)
+#define LCDCFG_LCD1_IS_IN	(1 << 16)
+#define LCDCFG_LCD2_TS		(1 << 3)
+#define LCDCFG_LCD2D_DS		(1 << 2)
+#define LCDCFG_LCD2C_DS		(1 << 1)
+#define LCDCFG_LCD2_IS_IN	(1 << 0)
+
+/* On-Die Frame Buffer Power Control Register */
+#define ODFBPWR_SLOW	(1 << 2)
+#define ODFBPWR_MODE	Fld(2,0)
+#define ODFBPWR_MODE_ACT	((0x0) << FShft(ODFBPWR_MODE))
+#define ODFBPWR_MODE_ACT_LP	((0x1) << FShft(ODFBPWR_MODE))
+#define ODFBPWR_MODE_SLEEP	((0x2) << FShft(ODFBPWR_MODE))
+#define ODFBPWR_MODE_SHUTD	((0x3) << FShft(ODFBPWR_MODE))
+
+/* On-Die Frame Buffer Power State Status Register */
+#define ODFBSTAT_ACT	(1 << 2)
+#define ODFBSTAT_SLP	(1 << 1)
+#define ODFBSTAT_SDN	(1 << 0)
+
+/* LMRST - Local Memory (SDRAM) Reset */
+#define LMRST_MC_RST	(1 << 0)
+
+/* LMCFG - Local Memory (SDRAM) Configuration Register */
+#define LMCFG_LMC_DS	(1 << 5)
+#define LMCFG_LMD_DS	(1 << 4)
+#define LMCFG_LMA_DS	(1 << 3)
+#define LMCFG_LMC_TS	(1 << 2)
+#define LMCFG_LMD_TS	(1 << 1)
+#define LMCFG_LMA_TS	(1 << 0)
+
+/* LMPWR - Local Memory (SDRAM) Power Control Register */
+#define LMPWR_MC_PWR_CNT	Fld(2,0)
+#define LMPWR_MC_PWR_ACT	((0x0) << FShft(LMPWR_MC_PWR_CNT)) /* Active */
+#define LMPWR_MC_PWR_SRM	((0x1) << FShft(LMPWR_MC_PWR_CNT)) /* Self-refresh */
+#define LMPWR_MC_PWR_DPD	((0x3) << FShft(LMPWR_MC_PWR_CNT)) /* deep power down */
+
+/* LMPWRSTAT - Local Memory (SDRAM) Power Status Register */
+#define LMPWRSTAT_MC_PWR_CNT	Fld(2,0)
+#define LMPWRSTAT_MC_PWR_ACT	((0x0) << FShft(LMPWRSTAT_MC_PWR_CNT)) /* Active */
+#define LMPWRSTAT_MC_PWR_SRM	((0x1) << FShft(LMPWRSTAT_MC_PWR_CNT)) /* Self-refresh */
+#define LMPWRSTAT_MC_PWR_DPD	((0x3) << FShft(LMPWRSTAT_MC_PWR_CNT)) /* deep power down */
+
+/* LMTYPE - Local Memory (SDRAM) Type Register */
+#define LMTYPE_CASLAT	Fld(3,10)
+#define LMTYPE_CASLAT_1	((0x1) << FShft(LMTYPE_CASLAT))
+#define LMTYPE_CASLAT_2	((0x2) << FShft(LMTYPE_CASLAT))
+#define LMTYPE_CASLAT_3	((0x3) << FShft(LMTYPE_CASLAT))
+#define LMTYPE_BKSZ	Fld(2,8)
+#define LMTYPE_BKSZ_1	((0x1) << FShft(LMTYPE_BKSZ))
+#define LMTYPE_BKSZ_2	((0x2) << FShft(LMTYPE_BKSZ))
+#define LMTYPE_ROWSZ	Fld(4,4)
+#define LMTYPE_ROWSZ_11	((0xb) << FShft(LMTYPE_ROWSZ))
+#define LMTYPE_ROWSZ_12	((0xc) << FShft(LMTYPE_ROWSZ))
+#define LMTYPE_ROWSZ_13	((0xd) << FShft(LMTYPE_ROWSZ))
+#define LMTYPE_COLSZ	Fld(4,0)
+#define LMTYPE_COLSZ_7	((0x7) << FShft(LMTYPE_COLSZ))
+#define LMTYPE_COLSZ_8	((0x8) << FShft(LMTYPE_COLSZ))
+#define LMTYPE_COLSZ_9	((0x9) << FShft(LMTYPE_COLSZ))
+#define LMTYPE_COLSZ_10	((0xa) << FShft(LMTYPE_COLSZ))
+#define LMTYPE_COLSZ_11	((0xb) << FShft(LMTYPE_COLSZ))
+#define LMTYPE_COLSZ_12	((0xc) << FShft(LMTYPE_COLSZ))
+
+/* LMTIM - Local Memory (SDRAM) Timing Register */
+#define LMTIM_TRAS	Fld(4,16)
+#define Lmtim_Tras(x)	((x) << FShft(LMTIM_TRAS))
+#define LMTIM_TRP	Fld(4,12)
+#define Lmtim_Trp(x)	((x) << FShft(LMTIM_TRP))
+#define LMTIM_TRCD	Fld(4,8)
+#define Lmtim_Trcd(x)	((x) << FShft(LMTIM_TRCD))
+#define LMTIM_TRC	Fld(4,4)
+#define Lmtim_Trc(x)	((x) << FShft(LMTIM_TRC))
+#define LMTIM_TDPL	Fld(4,0)
+#define Lmtim_Tdpl(x)	((x) << FShft(LMTIM_TDPL))
+
+/* LMREFRESH - Local Memory (SDRAM) tREF Control Register */
+#define LMREFRESH_TREF	Fld(2,0)
+#define Lmrefresh_Tref(x)	((x) << FShft(LMREFRESH_TREF))
+
+/* GSCTRL - Graphics surface control register */
+#define GSCTRL_LUT_EN	(1 << 31)
+#define GSCTRL_GPIXFMT	Fld(4,27)
+#define GSCTRL_GPIXFMT_INDEXED	((0x0) << FShft(GSCTRL_GPIXFMT))
+#define GSCTRL_GPIXFMT_ARGB4444	((0x4) << FShft(GSCTRL_GPIXFMT))
+#define GSCTRL_GPIXFMT_ARGB1555	((0x5) << FShft(GSCTRL_GPIXFMT))
+#define GSCTRL_GPIXFMT_RGB888	((0x6) << FShft(GSCTRL_GPIXFMT))
+#define GSCTRL_GPIXFMT_RGB565	((0x7) << FShft(GSCTRL_GPIXFMT))
+#define GSCTRL_GPIXFMT_ARGB8888	((0x8) << FShft(GSCTRL_GPIXFMT))
+#define GSCTRL_GAMMA_EN	(1 << 26)
+
+#define GSCTRL_GSWIDTH Fld(11,11)
+#define Gsctrl_Width(Pixel)	/* Display Width [1..2048 pix.]  */ \
+                        (((Pixel) - 1) << FShft(GSCTRL_GSWIDTH))
+
+#define GSCTRL_GSHEIGHT Fld(11,0)
+#define Gsctrl_Height(Pixel)	/* Display Height [1..2048 pix.]  */ \
+                        (((Pixel) - 1) << FShft(GSCTRL_GSHEIGHT))
+
+/* GBBASE fileds */
+#define GBBASE_GLALPHA Fld(8,24)
+#define Gbbase_Glalpha(x)	((x) << FShft(GBBASE_GLALPHA))
+
+#define GBBASE_COLKEY Fld(24,0)
+#define Gbbase_Colkey(x)	((x) << FShft(GBBASE_COLKEY))
+
+/* GDRCTRL fields */
+#define GDRCTRL_PIXDBL	(1 << 31)
+#define GDRCTRL_PIXHLV	(1 << 30)
+#define GDRCTRL_LNDBL	(1 << 29)
+#define GDRCTRL_LNHLV	(1 << 28)
+#define GDRCTRL_COLKEYM	Fld(24,0)
+#define Gdrctrl_Colkeym(x)	((x) << FShft(GDRCTRL_COLKEYM))
+
+/* GSCADR graphics stream control address register fields */
+#define GSCADR_STR_EN	(1 << 31)
+#define GSCADR_COLKEY_EN	(1 << 30)
+#define GSCADR_COLKEYSCR	(1 << 29)
+#define GSCADR_BLEND_M	Fld(2,27)
+#define GSCADR_BLEND_NONE	((0x0) << FShft(GSCADR_BLEND_M))
+#define GSCADR_BLEND_INV	((0x1) << FShft(GSCADR_BLEND_M))
+#define GSCADR_BLEND_GLOB	((0x2) << FShft(GSCADR_BLEND_M))
+#define GSCADR_BLEND_PIX	((0x3) << FShft(GSCADR_BLEND_M))
+#define GSCADR_BLEND_POS	Fld(2,24)
+#define GSCADR_BLEND_GFX	((0x0) << FShft(GSCADR_BLEND_POS))
+#define GSCADR_BLEND_VID	((0x1) << FShft(GSCADR_BLEND_POS))
+#define GSCADR_BLEND_CUR	((0x2) << FShft(GSCADR_BLEND_POS))
+#define GSCADR_GBASE_ADR	Fld(23,0)
+#define Gscadr_Gbase_Adr(x)	((x) << FShft(GSCADR_GBASE_ADR))
+
+/* GSADR graphics stride address register fields */
+#define GSADR_SRCSTRIDE	Fld(10,22)
+#define Gsadr_Srcstride(x)	((x) << FShft(GSADR_SRCSTRIDE))
+#define GSADR_XSTART	Fld(11,11)
+#define Gsadr_Xstart(x)		((x) << FShft(GSADR_XSTART))
+#define GSADR_YSTART	Fld(11,0)
+#define Gsadr_Ystart(y)		((y) << FShft(GSADR_YSTART))
+
+/* GPLUT graphics palette register fields */
+#define GPLUT_LUTADR	Fld(8,24)
+#define Gplut_Lutadr(x)	((x) << FShft(GPLUT_LUTADR))
+#define GPLUT_LUTDATA	Fld(24,0)
+#define Gplut_Lutdata(x)	((x) << FShft(GPLUT_LUTDATA))
+
+/* HCCTRL - Hardware Cursor Register fields */
+#define HCCTRL_CUR_EN	(1 << 31)
+#define HCCTRL_COLKEY_EN	(1 << 29)
+#define HCCTRL_COLKEYSRC	(1 << 28)
+#define HCCTRL_BLEND_M	Fld(2,26)
+#define HCCTRL_BLEND_NONE	((0x0) << FShft(HCCTRL_BLEND_M))
+#define HCCTRL_BLEND_INV	((0x1) << FShft(HCCTRL_BLEND_M))
+#define HCCTRL_BLEND_GLOB	((0x2) << FShft(HCCTRL_BLEND_M))
+#define HCCTRL_BLEND_PIX	((0x3) << FShft(HCCTRL_BLEND_M))
+#define HCCTRL_CPIXFMT	Fld(3,23)
+#define HCCTRL_CPIXFMT_RGB332	((0x3) << FShft(HCCTRL_CPIXFMT))
+#define HCCTRL_CPIXFMT_ARGB4444	((0x4) << FShft(HCCTRL_CPIXFMT))
+#define HCCTRL_CPIXFMT_ARGB1555	((0x5) << FShft(HCCTRL_CPIXFMT))
+#define HCCTRL_CBASE_ADR	Fld(23,0)
+#define Hcctrl_Cbase_Adr(x)	((x) << FShft(HCCTRL_CBASE_ADR))
+
+/* HCSIZE Hardware Cursor Size Register fields */
+#define HCSIZE_BLEND_POS	Fld(2,29)
+#define HCSIZE_BLEND_GFX	((0x0) << FShft(HCSIZE_BLEND_POS))
+#define HCSIZE_BLEND_VID	((0x1) << FShft(HCSIZE_BLEND_POS))
+#define HCSIZE_BLEND_CUR	((0x2) << FShft(HCSIZE_BLEND_POS))
+#define HCSIZE_CWIDTH	Fld(3,16)
+#define Hcsize_Cwidth(x)	((x) << FShft(HCSIZE_CWIDTH))
+#define HCSIZE_CHEIGHT	Fld(3,0)
+#define Hcsize_Cheight(x)	((x) << FShft(HCSIZE_CHEIGHT))
+
+/* HCPOS Hardware Cursor Position Register fields */
+#define HCPOS_SWITCHSRC	(1 << 30)
+#define HCPOS_CURBLINK	Fld(6,24)
+#define Hcpos_Curblink(x)	((x) << FShft(HCPOS_CURBLINK))
+#define HCPOS_XSTART	Fld(12,12)
+#define Hcpos_Xstart(x)	((x) << FShft(HCPOS_XSTART))
+#define HCPOS_YSTART	Fld(12,0)
+#define Hcpos_Ystart(y)	((y) << FShft(HCPOS_YSTART))
+
+/* HCBADR Hardware Cursor Blend Address Register */
+#define HCBADR_GLALPHA	Fld(8,24)
+#define Hcbadr_Glalpha(x)	((x) << FShft(HCBADR_GLALPHA))
+#define HCBADR_COLKEY	Fld(24,0)
+#define Hcbadr_Colkey(x)	((x) << FShft(HCBADR_COLKEY))
+
+/* HCCKMSK - Hardware Cursor Color Key Mask Register */
+#define HCCKMSK_COLKEY_M	Fld(24,0)
+#define Hcckmsk_Colkey_M(x)	((x) << FShft(HCCKMSK_COLKEY_M))
+
+/* DSCTRL - Display sync control register */
+#define DSCTRL_SYNCGEN_EN	(1 << 31)
+#define DSCTRL_DPL_RST		(1 << 29)
+#define DSCTRL_PWRDN_M		(1 << 28)
+#define DSCTRL_UPDSYNCCNT	(1 << 26)
+#define DSCTRL_UPDINTCNT	(1 << 25)
+#define DSCTRL_UPDCNT		(1 << 24)
+#define DSCTRL_UPDWAIT	Fld(4,16)
+#define Dsctrl_Updwait(x)	((x) << FShft(DSCTRL_UPDWAIT))
+#define DSCTRL_CLKPOL		(1 << 11)
+#define DSCTRL_CSYNC_EN		(1 << 10)
+#define DSCTRL_VS_SLAVE		(1 << 7)
+#define DSCTRL_HS_SLAVE		(1 << 6)
+#define DSCTRL_BLNK_POL		(1 << 5)
+#define DSCTRL_BLNK_DIS		(1 << 4)
+#define DSCTRL_VS_POL		(1 << 3)
+#define DSCTRL_VS_DIS		(1 << 2)
+#define DSCTRL_HS_POL		(1 << 1)
+#define DSCTRL_HS_DIS		(1 << 0)
+
+/* DHT01 - Display horizontal timing register 01 */
+#define DHT01_HBPS	Fld(12,16)
+#define Dht01_Hbps(x)	((x) << FShft(DHT01_HBPS))
+#define DHT01_HT	Fld(12,0)
+#define Dht01_Ht(x)	((x) << FShft(DHT01_HT))
+
+/* DHT02 - Display horizontal timing register 02 */
+#define DHT02_HAS	Fld(12,16)
+#define Dht02_Has(x)	((x) << FShft(DHT02_HAS))
+#define DHT02_HLBS	Fld(12,0)
+#define Dht02_Hlbs(x)	((x) << FShft(DHT02_HLBS))
+
+/* DHT03 - Display horizontal timing register 03 */
+#define DHT03_HFPS	Fld(12,16)
+#define Dht03_Hfps(x)	((x) << FShft(DHT03_HFPS))
+#define DHT03_HRBS	Fld(12,0)
+#define Dht03_Hrbs(x)	((x) << FShft(DHT03_HRBS))
+
+/* DVT01 - Display vertical timing register 01 */
+#define DVT01_VBPS	Fld(12,16)
+#define Dvt01_Vbps(x)	((x) << FShft(DVT01_VBPS))
+#define DVT01_VT	Fld(12,0)
+#define Dvt01_Vt(x)	((x) << FShft(DVT01_VT))
+
+/* DVT02 - Display vertical timing register 02 */
+#define DVT02_VAS	Fld(12,16)
+#define Dvt02_Vas(x)	((x) << FShft(DVT02_VAS))
+#define DVT02_VTBS	Fld(12,0)
+#define Dvt02_Vtbs(x)	((x) << FShft(DVT02_VTBS))
+
+/* DVT03 - Display vertical timing register 03 */
+#define DVT03_VFPS	Fld(12,16)
+#define Dvt03_Vfps(x)	((x) << FShft(DVT03_VFPS))
+#define DVT03_VBBS	Fld(12,0)
+#define Dvt03_Vbbs(x)	((x) << FShft(DVT03_VBBS))
+
+/* DVECTRL - display vertical event control register */
+#define DVECTRL_VEVENT	Fld(12,16)
+#define Dvectrl_Vevent(x)	((x) << FShft(DVECTRL_VEVENT))
+#define DVECTRL_VFETCH	Fld(12,0)
+#define Dvectrl_Vfetch(x)	((x) << FShft(DVECTRL_VFETCH))
+
+/* DHDET - display horizontal DE timing register */
+#define DHDET_HDES	Fld(12,16)
+#define Dhdet_Hdes(x)	((x) << FShft(DHDET_HDES))
+#define DHDET_HDEF	Fld(12,0)
+#define Dhdet_Hdef(x)	((x) << FShft(DHDET_HDEF))
+
+/* DVDET - display vertical DE timing register */
+#define DVDET_VDES	Fld(12,16)
+#define Dvdet_Vdes(x)	((x) << FShft(DVDET_VDES))
+#define DVDET_VDEF	Fld(12,0)
+#define Dvdet_Vdef(x)	((x) << FShft(DVDET_VDEF))
+
+/* DODMSK - display output data mask register */
+#define DODMSK_MASK_LVL	(1 << 31)
+#define DODMSK_BLNK_LVL	(1 << 30)
+#define DODMSK_MASK_B	Fld(8,16)
+#define Dodmsk_Mask_B(x)	((x) << FShft(DODMSK_MASK_B))
+#define DODMSK_MASK_G	Fld(8,8)
+#define Dodmsk_Mask_G(x)	((x) << FShft(DODMSK_MASK_G))
+#define DODMSK_MASK_R	Fld(8,0)
+#define Dodmsk_Mask_R(x)	((x) << FShft(DODMSK_MASK_R))
+
+/* DBCOL - display border color control register */
+#define DBCOL_BORDCOL	Fld(24,0)
+#define Dbcol_Bordcol(x)	((x) << FShft(DBCOL_BORDCOL))
+
+/* DVLNUM - display vertical line number register */
+#define DVLNUM_VLINE	Fld(12,0)
+#define Dvlnum_Vline(x)	((x) << FShft(DVLNUM_VLINE))
+
+/* DMCTRL - Display Memory Control Register */
+#define DMCTRL_MEM_REF	Fld(2,30)
+#define DMCTRL_MEM_REF_ACT	((0x0) << FShft(DMCTRL_MEM_REF))
+#define DMCTRL_MEM_REF_HB	((0x1) << FShft(DMCTRL_MEM_REF))
+#define DMCTRL_MEM_REF_VB	((0x2) << FShft(DMCTRL_MEM_REF))
+#define DMCTRL_MEM_REF_BOTH	((0x3) << FShft(DMCTRL_MEM_REF))
+#define DMCTRL_UV_THRHLD	Fld(6,24)
+#define Dmctrl_Uv_Thrhld(x)	((x) << FShft(DMCTRL_UV_THRHLD))
+#define DMCTRL_V_THRHLD		Fld(7,16)
+#define Dmctrl_V_Thrhld(x)	((x) << FShft(DMCTRL_V_THRHLD))
+#define DMCTRL_D_THRHLD		Fld(7,8)
+#define Dmctrl_D_Thrhld(x)	((x) << FShft(DMCTRL_D_THRHLD))
+#define DMCTRL_BURSTLEN	Fld(6,0)
+#define Dmctrl_Burstlen(x)	((x) << FShft(DMCTRL_BURSTLEN))
+
+
+/* DLSTS - display load status register */
+#define DLSTS_RLD_ADONE	(1 << 23)
+/* #define DLSTS_RLD_ADOUT	Fld(23,0) */
+
+/* DLLCTRL - display list load control register */
+#define DLLCTRL_RLD_ADRLN	Fld(8,24)
+#define Dllctrl_Rld_Adrln(x)	((x) << FShft(DLLCTRL_RLD_ADRLN))
+
+/* SPOCTRL - Scale Pitch/Order Control Register */
+#define SPOCTRL_H_SC_BP		(1 << 31)
+#define SPOCTRL_V_SC_BP		(1 << 30)
+#define SPOCTRL_HV_SC_OR	(1 << 29)
+#define SPOCTRL_VS_UR_C		(1 << 27)
+#define SPOCTRL_VORDER	Fld(2,16)
+#define SPOCTRL_VORDER_1TAP	((0x0) << FShft(SPOCTRL_VORDER))
+#define SPOCTRL_VORDER_2TAP	((0x1) << FShft(SPOCTRL_VORDER))
+#define SPOCTRL_VORDER_4TAP	((0x3) << FShft(SPOCTRL_VORDER))
+#define SPOCTRL_VPITCH	Fld(16,0)
+#define Spoctrl_Vpitch(x)	((x) << FShft(SPOCTRL_VPITCH))
+
+#endif /* __REG_BITS_2700G_ */
diff -urN linux-2.6.18-rc1/drivers/video/mbx/regs.h linux-2.6.18-rc2/drivers/video/mbx/regs.h
--- linux-2.6.18-rc1/drivers/video/mbx/regs.h	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/drivers/video/mbx/regs.h	2006-07-15 22:34:48.493639687 +0000
@@ -0,0 +1,195 @@
+#ifndef __REGS_2700G_
+#define __REGS_2700G_
+
+/* extern unsigned long virt_base_2700; */
+/* #define __REG_2700G(x)	(*(volatile unsigned long*)((x)+virt_base_2700)) */
+#define __REG_2700G(x)	((x)+virt_base_2700)
+
+/* System Configuration Registers (0x0000_0000  0x0000_0010) */
+#define SYSCFG		__REG_2700G(0x00000000)
+#define PFBASE		__REG_2700G(0x00000004)
+#define PFCEIL		__REG_2700G(0x00000008)
+#define POLLFLAG	__REG_2700G(0x0000000c)
+#define SYSRST		__REG_2700G(0x00000010)
+
+/* Interrupt Control Registers (0x0000_0014  0x0000_002F) */
+#define NINTPW		__REG_2700G(0x00000014)
+#define MINTENABLE	__REG_2700G(0x00000018)
+#define MINTSTAT	__REG_2700G(0x0000001c)
+#define SINTENABLE	__REG_2700G(0x00000020)
+#define SINTSTAT	__REG_2700G(0x00000024)
+#define SINTCLR		__REG_2700G(0x00000028)
+
+/* Clock Control Registers (0x0000_002C  0x0000_005F) */
+#define SYSCLKSRC	__REG_2700G(0x0000002c)
+#define PIXCLKSRC	__REG_2700G(0x00000030)
+#define CLKSLEEP	__REG_2700G(0x00000034)
+#define COREPLL		__REG_2700G(0x00000038)
+#define DISPPLL		__REG_2700G(0x0000003c)
+#define PLLSTAT		__REG_2700G(0x00000040)
+#define VOVRCLK		__REG_2700G(0x00000044)
+#define PIXCLK		__REG_2700G(0x00000048)
+#define MEMCLK		__REG_2700G(0x0000004c)
+#define M24CLK		__REG_2700G(0x00000054)
+#define MBXCLK		__REG_2700G(0x00000054)
+#define SDCLK		__REG_2700G(0x00000058)
+#define PIXCLKDIV	__REG_2700G(0x0000005c)
+
+/* LCD Port Control Register (0x0000_0060  0x0000_006F) */
+#define LCD_CONFIG	__REG_2700G(0x00000060)
+
+/* On-Die Frame Buffer Registers (0x0000_0064  0x0000_006B) */
+#define ODFBPWR		__REG_2700G(0x00000064)
+#define ODFBSTAT	__REG_2700G(0x00000068)
+
+/* GPIO Registers (0x0000_006C  0x0000_007F) */
+#define GPIOCGF		__REG_2700G(0x0000006c)
+#define GPIOHI		__REG_2700G(0x00000070)
+#define GPIOLO		__REG_2700G(0x00000074)
+#define GPIOSTAT	__REG_2700G(0x00000078)
+
+/* Pulse Width Modulator (PWM) Registers (0x0000_0200  0x0000_02FF) */
+#define PWMRST		__REG_2700G(0x00000200)
+#define PWMCFG		__REG_2700G(0x00000204)
+#define PWM0DIV		__REG_2700G(0x00000210)
+#define PWM0DUTY	__REG_2700G(0x00000214)
+#define PWM0PER		__REG_2700G(0x00000218)
+#define PWM1DIV		__REG_2700G(0x00000220)
+#define PWM1DUTY	__REG_2700G(0x00000224)
+#define PWM1PER		__REG_2700G(0x00000228)
+
+/* Identification (ID) Registers (0x0000_0300  0x0000_0FFF) */
+#define ID		__REG_2700G(0x00000FF0)
+
+/* Local Memory (SDRAM) Interface Registers (0x0000_1000  0x0000_1FFF) */
+#define LMRST		__REG_2700G(0x00001000)
+#define LMCFG		__REG_2700G(0x00001004)
+#define LMPWR		__REG_2700G(0x00001008)
+#define LMPWRSTAT	__REG_2700G(0x0000100c)
+#define LMCEMR		__REG_2700G(0x00001010)
+#define LMTYPE		__REG_2700G(0x00001014)
+#define LMTIM		__REG_2700G(0x00001018)
+#define LMREFRESH	__REG_2700G(0x0000101c)
+#define LMPROTMIN	__REG_2700G(0x00001020)
+#define LMPROTMAX	__REG_2700G(0x00001024)
+#define LMPROTCFG	__REG_2700G(0x00001028)
+#define LMPROTERR	__REG_2700G(0x0000102c)
+
+/* Plane Controller Registers (0x0000_2000  0x0000_2FFF) */
+#define GSCTRL		__REG_2700G(0x00002000)
+#define VSCTRL		__REG_2700G(0x00002004)
+#define GBBASE		__REG_2700G(0x00002020)
+#define VBBASE		__REG_2700G(0x00002024)
+#define GDRCTRL		__REG_2700G(0x00002040)
+#define VCMSK		__REG_2700G(0x00002044)
+#define GSCADR		__REG_2700G(0x00002060)
+#define VSCADR		__REG_2700G(0x00002064)
+#define VUBASE		__REG_2700G(0x00002084)
+#define VVBASE		__REG_2700G(0x000020a4)
+#define GSADR		__REG_2700G(0x000020c0)
+#define VSADR		__REG_2700G(0x000020c4)
+#define HCCTRL		__REG_2700G(0x00002100)
+#define HCSIZE		__REG_2700G(0x00002110)
+#define HCPOS		__REG_2700G(0x00002120)
+#define HCBADR		__REG_2700G(0x00002130)
+#define HCCKMSK		__REG_2700G(0x00002140)
+#define GPLUT		__REG_2700G(0x00002150)
+#define DSCTRL		__REG_2700G(0x00002154)
+#define DHT01		__REG_2700G(0x00002158)
+#define DHT02		__REG_2700G(0x0000215c)
+#define DHT03		__REG_2700G(0x00002160)
+#define DVT01		__REG_2700G(0x00002164)
+#define DVT02		__REG_2700G(0x00002168)
+#define DVT03		__REG_2700G(0x0000216c)
+#define DBCOL		__REG_2700G(0x00002170)
+#define BGCOLOR		__REG_2700G(0x00002174)
+#define DINTRS		__REG_2700G(0x00002178)
+#define DINTRE		__REG_2700G(0x0000217c)
+#define DINTRCNT	__REG_2700G(0x00002180)
+#define DSIG		__REG_2700G(0x00002184)
+#define DMCTRL		__REG_2700G(0x00002188)
+#define CLIPCTRL	__REG_2700G(0x0000218c)
+#define SPOCTRL		__REG_2700G(0x00002190)
+#define SVCTRL		__REG_2700G(0x00002194)
+
+/* 0x0000_2198 */
+/* 0x0000_21A8 VSCOEFF[0:4] Video Scalar Vertical Coefficient [0:4] 4.14.5 */
+#define VSCOEFF0	__REG_2700G(0x00002198)
+#define VSCOEFF1	__REG_2700G(0x0000219c)
+#define VSCOEFF2	__REG_2700G(0x000021a0)
+#define VSCOEFF3	__REG_2700G(0x000021a4)
+#define VSCOEFF4	__REG_2700G(0x000021a8)
+
+#define SHCTRL		__REG_2700G(0x000021b0)
+
+/* 0x0000_21B4 */
+/* 0x0000_21D4 HSCOEFF[0:8] Video Scalar Horizontal Coefficient [0:8] 4.14.7 */
+#define HSCOEFF0	__REG_2700G(0x000021b4)
+#define HSCOEFF1	__REG_2700G(0x000021b8)
+#define HSCOEFF2	__REG_2700G(0x000021bc)
+#define HSCOEFF3	__REG_2700G(0x000021b0)
+#define HSCOEFF4	__REG_2700G(0x000021c4)
+#define HSCOEFF5	__REG_2700G(0x000021c8)
+#define HSCOEFF6	__REG_2700G(0x000021cc)
+#define HSCOEFF7	__REG_2700G(0x000021d0)
+#define HSCOEFF8	__REG_2700G(0x000021d4)
+
+#define SSSIZE		__REG_2700G(0x000021D8)
+
+/* 0x0000_2200 */
+/* 0x0000_2240 VIDGAM[0:16] Video Gamma LUT Index [0:16] 4.15.2 */
+#define VIDGAM0		__REG_2700G(0x00002200)
+#define VIDGAM1		__REG_2700G(0x00002204)
+#define VIDGAM2		__REG_2700G(0x00002208)
+#define VIDGAM3		__REG_2700G(0x0000220c)
+#define VIDGAM4		__REG_2700G(0x00002210)
+#define VIDGAM5		__REG_2700G(0x00002214)
+#define VIDGAM6		__REG_2700G(0x00002218)
+#define VIDGAM7		__REG_2700G(0x0000221c)
+#define VIDGAM8		__REG_2700G(0x00002220)
+#define VIDGAM9		__REG_2700G(0x00002224)
+#define VIDGAM10	__REG_2700G(0x00002228)
+#define VIDGAM11	__REG_2700G(0x0000222c)
+#define VIDGAM12	__REG_2700G(0x00002230)
+#define VIDGAM13	__REG_2700G(0x00002234)
+#define VIDGAM14	__REG_2700G(0x00002238)
+#define VIDGAM15	__REG_2700G(0x0000223c)
+#define VIDGAM16	__REG_2700G(0x00002240)
+
+/* 0x0000_2250 */
+/* 0x0000_2290 GFXGAM[0:16] Graphics Gamma LUT Index [0:16] 4.15.3 */
+#define GFXGAM0		__REG_2700G(0x00002250)
+#define GFXGAM1		__REG_2700G(0x00002254)
+#define GFXGAM2		__REG_2700G(0x00002258)
+#define GFXGAM3		__REG_2700G(0x0000225c)
+#define GFXGAM4		__REG_2700G(0x00002260)
+#define GFXGAM5		__REG_2700G(0x00002264)
+#define GFXGAM6		__REG_2700G(0x00002268)
+#define GFXGAM7		__REG_2700G(0x0000226c)
+#define GFXGAM8		__REG_2700G(0x00002270)
+#define GFXGAM9		__REG_2700G(0x00002274)
+#define GFXGAM10	__REG_2700G(0x00002278)
+#define GFXGAM11	__REG_2700G(0x0000227c)
+#define GFXGAM12	__REG_2700G(0x00002280)
+#define GFXGAM13	__REG_2700G(0x00002284)
+#define GFXGAM14	__REG_2700G(0x00002288)
+#define GFXGAM15	__REG_2700G(0x0000228c)
+#define GFXGAM16	__REG_2700G(0x00002290)
+
+#define DLSTS		__REG_2700G(0x00002300)
+#define DLLCTRL		__REG_2700G(0x00002304)
+#define DVLNUM		__REG_2700G(0x00002308)
+#define DUCTRL		__REG_2700G(0x0000230c)
+#define DVECTRL		__REG_2700G(0x00002310)
+#define DHDET		__REG_2700G(0x00002314)
+#define DVDET		__REG_2700G(0x00002318)
+#define DODMSK		__REG_2700G(0x0000231c)
+#define CSC01		__REG_2700G(0x00002330)
+#define CSC02		__REG_2700G(0x00002334)
+#define CSC03		__REG_2700G(0x00002338)
+#define CSC04		__REG_2700G(0x0000233c)
+#define CSC05		__REG_2700G(0x00002340)
+
+#define FB_MEMORY_START	__REG_2700G(0x00060000)
+
+#endif /* __REGS_2700G_ */
diff -urN linux-2.6.18-rc1/drivers/video/modedb.c linux-2.6.18-rc2/drivers/video/modedb.c
--- linux-2.6.18-rc1/drivers/video/modedb.c	2006-07-15 22:34:43.205065622 +0000
+++ linux-2.6.18-rc2/drivers/video/modedb.c	2006-07-15 22:34:48.493639687 +0000
@@ -12,7 +12,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/tty.h>
 #include <linux/fb.h>
 #include <linux/sched.h>
 
diff -urN linux-2.6.18-rc1/drivers/video/neofb.c linux-2.6.18-rc2/drivers/video/neofb.c
--- linux-2.6.18-rc1/drivers/video/neofb.c	2006-07-15 22:34:43.205065622 +0000
+++ linux-2.6.18-rc2/drivers/video/neofb.c	2006-07-15 22:34:48.493639687 +0000
@@ -59,7 +59,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff -urN linux-2.6.18-rc1/drivers/video/nvidia/nv_backlight.c linux-2.6.18-rc2/drivers/video/nvidia/nv_backlight.c
--- linux-2.6.18-rc1/drivers/video/nvidia/nv_backlight.c	2006-07-15 22:34:43.205065622 +0000
+++ linux-2.6.18-rc2/drivers/video/nvidia/nv_backlight.c	2006-07-15 22:34:48.493639687 +0000
@@ -26,9 +26,11 @@
  */
 #define MIN_LEVEL 0x158
 #define MAX_LEVEL 0x534
+#define LEVEL_STEP ((MAX_LEVEL - MIN_LEVEL) / FB_BACKLIGHT_MAX)
 
 static struct backlight_properties nvidia_bl_data;
 
+/* Call with fb_info->bl_mutex held */
 static int nvidia_bl_get_level_brightness(struct nvidia_par *par,
 		int level)
 {
@@ -36,9 +38,7 @@
 	int nlevel;
 
 	/* Get and convert the value */
-	mutex_lock(&info->bl_mutex);
-	nlevel = info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL;
-	mutex_unlock(&info->bl_mutex);
+	nlevel = MIN_LEVEL + info->bl_curve[level] * LEVEL_STEP;
 
 	if (nlevel < 0)
 		nlevel = 0;
@@ -50,7 +50,8 @@
 	return nlevel;
 }
 
-static int nvidia_bl_update_status(struct backlight_device *bd)
+/* Call with fb_info->bl_mutex held */
+static int __nvidia_bl_update_status(struct backlight_device *bd)
 {
 	struct nvidia_par *par = class_get_devdata(&bd->class_dev);
 	u32 tmp_pcrt, tmp_pmc, fpcontrol;
@@ -84,6 +85,19 @@
 	return 0;
 }
 
+static int nvidia_bl_update_status(struct backlight_device *bd)
+{
+	struct nvidia_par *par = class_get_devdata(&bd->class_dev);
+	struct fb_info *info = pci_get_drvdata(par->pci_dev);
+	int ret;
+
+	mutex_lock(&info->bl_mutex);
+	ret = __nvidia_bl_update_status(bd);
+	mutex_unlock(&info->bl_mutex);
+
+	return ret;
+}
+
 static int nvidia_bl_get_brightness(struct backlight_device *bd)
 {
 	return bd->props->brightness;
@@ -96,6 +110,16 @@
 	.max_brightness = (FB_BACKLIGHT_LEVELS - 1),
 };
 
+void nvidia_bl_set_power(struct fb_info *info, int power)
+{
+	mutex_lock(&info->bl_mutex);
+	up(&info->bl_dev->sem);
+	info->bl_dev->props->power = power;
+	__nvidia_bl_update_status(info->bl_dev);
+	down(&info->bl_dev->sem);
+	mutex_unlock(&info->bl_mutex);
+}
+
 void nvidia_bl_init(struct nvidia_par *par)
 {
 	struct fb_info *info = pci_get_drvdata(par->pci_dev);
diff -urN linux-2.6.18-rc1/drivers/video/nvidia/nv_proto.h linux-2.6.18-rc2/drivers/video/nvidia/nv_proto.h
--- linux-2.6.18-rc1/drivers/video/nvidia/nv_proto.h	2006-07-15 22:34:43.205065622 +0000
+++ linux-2.6.18-rc2/drivers/video/nvidia/nv_proto.h	2006-07-15 22:34:48.497640122 +0000
@@ -68,9 +68,11 @@
 #ifdef CONFIG_FB_NVIDIA_BACKLIGHT
 extern void nvidia_bl_init(struct nvidia_par *par);
 extern void nvidia_bl_exit(struct nvidia_par *par);
+extern void nvidia_bl_set_power(struct fb_info *info, int power);
 #else
 static inline void nvidia_bl_init(struct nvidia_par *par) {}
 static inline void nvidia_bl_exit(struct nvidia_par *par) {}
+static inline void nvidia_bl_set_power(struct fb_info *info, int power) {}
 #endif
 
 #endif				/* __NV_PROTO_H__ */
diff -urN linux-2.6.18-rc1/drivers/video/nvidia/nvidia.c linux-2.6.18-rc2/drivers/video/nvidia/nvidia.c
--- linux-2.6.18-rc1/drivers/video/nvidia/nvidia.c	2006-07-15 22:34:43.209066057 +0000
+++ linux-2.6.18-rc2/drivers/video/nvidia/nvidia.c	2006-07-15 22:34:48.497640122 +0000
@@ -14,7 +14,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
@@ -933,16 +932,7 @@
 	NVWriteSeq(par, 0x01, tmp);
 	NVWriteCrtc(par, 0x1a, vesa);
 
-#ifdef CONFIG_FB_NVIDIA_BACKLIGHT
-	mutex_lock(&info->bl_mutex);
-	if (info->bl_dev) {
-		down(&info->bl_dev->sem);
-		info->bl_dev->props->power = blank;
-		info->bl_dev->props->update_status(info->bl_dev);
-		up(&info->bl_dev->sem);
-	}
-	mutex_unlock(&info->bl_mutex);
-#endif
+	nvidia_bl_set_power(info, blank);
 
 	NVTRACE_LEAVE();
 
diff -urN linux-2.6.18-rc1/drivers/video/offb.c linux-2.6.18-rc2/drivers/video/offb.c
--- linux-2.6.18-rc1/drivers/video/offb.c	2006-07-15 22:34:43.209066057 +0000
+++ linux-2.6.18-rc2/drivers/video/offb.c	2006-07-15 22:34:48.497640122 +0000
@@ -17,7 +17,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff -urN linux-2.6.18-rc1/drivers/video/platinumfb.c linux-2.6.18-rc2/drivers/video/platinumfb.c
--- linux-2.6.18-rc1/drivers/video/platinumfb.c	2006-07-15 22:34:43.209066057 +0000
+++ linux-2.6.18-rc2/drivers/video/platinumfb.c	2006-07-15 22:34:48.497640122 +0000
@@ -22,7 +22,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff -urN linux-2.6.18-rc1/drivers/video/pm2fb.c linux-2.6.18-rc2/drivers/video/pm2fb.c
--- linux-2.6.18-rc1/drivers/video/pm2fb.c	2006-07-15 22:34:43.209066057 +0000
+++ linux-2.6.18-rc2/drivers/video/pm2fb.c	2006-07-15 22:34:48.497640122 +0000
@@ -33,7 +33,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff -urN linux-2.6.18-rc1/drivers/video/pm3fb.c linux-2.6.18-rc2/drivers/video/pm3fb.c
--- linux-2.6.18-rc1/drivers/video/pm3fb.c	2006-07-15 22:34:43.209066057 +0000
+++ linux-2.6.18-rc2/drivers/video/pm3fb.c	2006-07-15 22:34:48.501640556 +0000
@@ -57,7 +57,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff -urN linux-2.6.18-rc1/drivers/video/pmag-aa-fb.c linux-2.6.18-rc2/drivers/video/pmag-aa-fb.c
--- linux-2.6.18-rc1/drivers/video/pmag-aa-fb.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/video/pmag-aa-fb.c	2006-07-15 22:34:48.501640556 +0000
@@ -29,7 +29,6 @@
 #include <linux/string.h>
 #include <linux/timer.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/init.h>
diff -urN linux-2.6.18-rc1/drivers/video/pvr2fb.c linux-2.6.18-rc2/drivers/video/pvr2fb.c
--- linux-2.6.18-rc1/drivers/video/pvr2fb.c	2006-07-15 22:34:43.213066491 +0000
+++ linux-2.6.18-rc2/drivers/video/pvr2fb.c	2006-07-15 22:34:48.501640556 +0000
@@ -53,7 +53,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
diff -urN linux-2.6.18-rc1/drivers/video/q40fb.c linux-2.6.18-rc2/drivers/video/q40fb.c
--- linux-2.6.18-rc1/drivers/video/q40fb.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/video/q40fb.c	2006-07-15 22:34:48.505640990 +0000
@@ -14,7 +14,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
diff -urN linux-2.6.18-rc1/drivers/video/retz3fb.c linux-2.6.18-rc2/drivers/video/retz3fb.c
--- linux-2.6.18-rc1/drivers/video/retz3fb.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/video/retz3fb.c	2006-07-15 22:34:48.505640990 +0000
@@ -25,7 +25,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff -urN linux-2.6.18-rc1/drivers/video/riva/fbdev.c linux-2.6.18-rc2/drivers/video/riva/fbdev.c
--- linux-2.6.18-rc1/drivers/video/riva/fbdev.c	2006-07-15 22:34:43.213066491 +0000
+++ linux-2.6.18-rc2/drivers/video/riva/fbdev.c	2006-07-15 22:34:48.505640990 +0000
@@ -34,7 +34,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
@@ -278,9 +277,11 @@
  */
 #define MIN_LEVEL 0x158
 #define MAX_LEVEL 0x534
+#define LEVEL_STEP ((MAX_LEVEL - MIN_LEVEL) / FB_BACKLIGHT_MAX)
 
 static struct backlight_properties riva_bl_data;
 
+/* Call with fb_info->bl_mutex held */
 static int riva_bl_get_level_brightness(struct riva_par *par,
 		int level)
 {
@@ -288,9 +289,7 @@
 	int nlevel;
 
 	/* Get and convert the value */
-	mutex_lock(&info->bl_mutex);
-	nlevel = info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL;
-	mutex_unlock(&info->bl_mutex);
+	nlevel = MIN_LEVEL + info->bl_curve[level] * LEVEL_STEP;
 
 	if (nlevel < 0)
 		nlevel = 0;
@@ -302,7 +301,8 @@
 	return nlevel;
 }
 
-static int riva_bl_update_status(struct backlight_device *bd)
+/* Call with fb_info->bl_mutex held */
+static int __riva_bl_update_status(struct backlight_device *bd)
 {
 	struct riva_par *par = class_get_devdata(&bd->class_dev);
 	U032 tmp_pcrt, tmp_pmc;
@@ -327,6 +327,19 @@
 	return 0;
 }
 
+static int riva_bl_update_status(struct backlight_device *bd)
+{
+	struct riva_par *par = class_get_devdata(&bd->class_dev);
+	struct fb_info *info = pci_get_drvdata(par->pdev);
+	int ret;
+
+	mutex_lock(&info->bl_mutex);
+	ret = __riva_bl_update_status(bd);
+	mutex_unlock(&info->bl_mutex);
+
+	return ret;
+}
+
 static int riva_bl_get_brightness(struct backlight_device *bd)
 {
 	return bd->props->brightness;
@@ -339,6 +352,16 @@
 	.max_brightness = (FB_BACKLIGHT_LEVELS - 1),
 };
 
+static void riva_bl_set_power(struct fb_info *info, int power)
+{
+	mutex_lock(&info->bl_mutex);
+	up(&info->bl_dev->sem);
+	info->bl_dev->props->power = power;
+	__riva_bl_update_status(info->bl_dev);
+	down(&info->bl_dev->sem);
+	mutex_unlock(&info->bl_mutex);
+}
+
 static void riva_bl_init(struct riva_par *par)
 {
 	struct fb_info *info = pci_get_drvdata(par->pdev);
@@ -419,6 +442,7 @@
 #else
 static inline void riva_bl_init(struct riva_par *par) {}
 static inline void riva_bl_exit(struct riva_par *par) {}
+static inline void riva_bl_set_power(struct fb_info *info, int power) {}
 #endif /* CONFIG_FB_RIVA_BACKLIGHT */
 
 /* ------------------------------------------------------------------------- *
@@ -1337,16 +1361,7 @@
 	SEQout(par, 0x01, tmp);
 	CRTCout(par, 0x1a, vesa);
 
-#ifdef CONFIG_FB_RIVA_BACKLIGHT
-	mutex_lock(&info->bl_mutex);
-	if (info->bl_dev) {
-		down(&info->bl_dev->sem);
-		info->bl_dev->props->power = blank;
-		info->bl_dev->props->update_status(info->bl_dev);
-		up(&info->bl_dev->sem);
-	}
-	mutex_unlock(&info->bl_mutex);
-#endif
+	riva_bl_set_power(info, blank);
 
 	NVTRACE_LEAVE();
 
diff -urN linux-2.6.18-rc1/drivers/video/s3c2410fb.c linux-2.6.18-rc2/drivers/video/s3c2410fb.c
--- linux-2.6.18-rc1/drivers/video/s3c2410fb.c	2006-07-15 22:34:43.213066491 +0000
+++ linux-2.6.18-rc2/drivers/video/s3c2410fb.c	2006-07-15 22:34:48.505640990 +0000
@@ -76,7 +76,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff -urN linux-2.6.18-rc1/drivers/video/savage/savagefb_driver.c linux-2.6.18-rc2/drivers/video/savage/savagefb_driver.c
--- linux-2.6.18-rc1/drivers/video/savage/savagefb_driver.c	2006-07-15 22:34:43.217066925 +0000
+++ linux-2.6.18-rc2/drivers/video/savage/savagefb_driver.c	2006-07-15 22:34:48.509641424 +0000
@@ -46,7 +46,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff -urN linux-2.6.18-rc1/drivers/video/sis/sis_main.c linux-2.6.18-rc2/drivers/video/sis/sis_main.c
--- linux-2.6.18-rc1/drivers/video/sis/sis_main.c	2006-07-15 22:34:43.225067794 +0000
+++ linux-2.6.18-rc2/drivers/video/sis/sis_main.c	2006-07-15 22:34:48.517642293 +0000
@@ -44,7 +44,13 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17)
 #include <linux/tty.h>
+#else
+#include <linux/screen_info.h>
+#endif
+
 #include <linux/slab.h>
 #include <linux/fb.h>
 #include <linux/selection.h>
diff -urN linux-2.6.18-rc1/drivers/video/skeletonfb.c linux-2.6.18-rc2/drivers/video/skeletonfb.c
--- linux-2.6.18-rc1/drivers/video/skeletonfb.c	2006-07-15 22:34:43.225067794 +0000
+++ linux-2.6.18-rc2/drivers/video/skeletonfb.c	2006-07-15 22:34:48.517642293 +0000
@@ -47,7 +47,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
diff -urN linux-2.6.18-rc1/drivers/video/sun3fb.c linux-2.6.18-rc2/drivers/video/sun3fb.c
--- linux-2.6.18-rc1/drivers/video/sun3fb.c	2006-07-15 22:34:43.229068228 +0000
+++ linux-2.6.18-rc2/drivers/video/sun3fb.c	2006-07-15 22:34:48.517642293 +0000
@@ -30,7 +30,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff -urN linux-2.6.18-rc1/drivers/video/tdfxfb.c linux-2.6.18-rc2/drivers/video/tdfxfb.c
--- linux-2.6.18-rc1/drivers/video/tdfxfb.c	2006-07-15 22:34:43.229068228 +0000
+++ linux-2.6.18-rc2/drivers/video/tdfxfb.c	2006-07-15 22:34:48.521642727 +0000
@@ -63,7 +63,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
diff -urN linux-2.6.18-rc1/drivers/video/tgafb.c linux-2.6.18-rc2/drivers/video/tgafb.c
--- linux-2.6.18-rc1/drivers/video/tgafb.c	2006-07-15 22:34:43.229068228 +0000
+++ linux-2.6.18-rc2/drivers/video/tgafb.c	2006-07-15 22:34:48.521642727 +0000
@@ -17,7 +17,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/init.h>
diff -urN linux-2.6.18-rc1/drivers/video/tx3912fb.c linux-2.6.18-rc2/drivers/video/tx3912fb.c
--- linux-2.6.18-rc1/drivers/video/tx3912fb.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/video/tx3912fb.c	2006-07-15 22:34:48.521642727 +0000
@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/string.h>
-#include <linux/tty.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
diff -urN linux-2.6.18-rc1/drivers/video/valkyriefb.c linux-2.6.18-rc2/drivers/video/valkyriefb.c
--- linux-2.6.18-rc1/drivers/video/valkyriefb.c	2006-07-15 22:34:43.229068228 +0000
+++ linux-2.6.18-rc2/drivers/video/valkyriefb.c	2006-07-15 22:34:48.521642727 +0000
@@ -44,7 +44,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff -urN linux-2.6.18-rc1/drivers/video/vesafb.c linux-2.6.18-rc2/drivers/video/vesafb.c
--- linux-2.6.18-rc1/drivers/video/vesafb.c	2006-07-15 22:34:43.229068228 +0000
+++ linux-2.6.18-rc2/drivers/video/vesafb.c	2006-07-15 22:34:48.521642727 +0000
@@ -13,13 +13,13 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/screen_info.h>
 
 #include <video/vga.h>
 #include <asm/io.h>
diff -urN linux-2.6.18-rc1/drivers/video/vfb.c linux-2.6.18-rc2/drivers/video/vfb.c
--- linux-2.6.18-rc1/drivers/video/vfb.c	2006-07-15 22:34:43.229068228 +0000
+++ linux-2.6.18-rc2/drivers/video/vfb.c	2006-07-15 22:34:48.521642727 +0000
@@ -15,7 +15,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
diff -urN linux-2.6.18-rc1/drivers/video/vga16fb.c linux-2.6.18-rc2/drivers/video/vga16fb.c
--- linux-2.6.18-rc1/drivers/video/vga16fb.c	2006-07-15 22:34:43.233068662 +0000
+++ linux-2.6.18-rc2/drivers/video/vga16fb.c	2006-07-15 22:34:48.525643161 +0000
@@ -15,13 +15,13 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/fb.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/screen_info.h>
 
 #include <asm/io.h>
 #include <video/vga.h>
diff -urN linux-2.6.18-rc1/drivers/video/virgefb.c linux-2.6.18-rc2/drivers/video/virgefb.c
--- linux-2.6.18-rc1/drivers/video/virgefb.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/drivers/video/virgefb.c	2006-07-15 22:34:48.525643161 +0000
@@ -39,7 +39,6 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
-#include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/zorro.h>
diff -urN linux-2.6.18-rc1/drivers/w1/masters/ds2482.c linux-2.6.18-rc2/drivers/w1/masters/ds2482.c
--- linux-2.6.18-rc1/drivers/w1/masters/ds2482.c	2006-07-15 22:34:43.233068662 +0000
+++ linux-2.6.18-rc2/drivers/w1/masters/ds2482.c	2006-07-15 22:34:48.525643161 +0000
@@ -218,7 +218,7 @@
 		do {
 			temp = i2c_smbus_read_byte(&pdev->client);
 		} while ((temp >= 0) && (temp & DS2482_REG_STS_1WB) &&
-			 (++retries > DS2482_WAIT_IDLE_TIMEOUT));
+			 (++retries < DS2482_WAIT_IDLE_TIMEOUT));
 	}
 
 	if (retries > DS2482_WAIT_IDLE_TIMEOUT)
diff -urN linux-2.6.18-rc1/drivers/w1/w1_io.h linux-2.6.18-rc2/drivers/w1/w1_io.h
--- linux-2.6.18-rc1/drivers/w1/w1_io.h	2006-07-15 22:34:43.237069096 +0000
+++ linux-2.6.18-rc2/drivers/w1/w1_io.h	1970-01-01 00:00:00.000000000 +0000
@@ -1,36 +0,0 @@
-/*
- *	w1_io.h
- *
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __W1_IO_H
-#define __W1_IO_H
-
-#include "w1.h"
-
-u8 w1_triplet(struct w1_master *dev, int bdir);
-void w1_write_8(struct w1_master *, u8);
-int w1_reset_bus(struct w1_master *);
-u8 w1_calc_crc8(u8 *, int);
-void w1_write_block(struct w1_master *, const u8 *, int);
-u8 w1_read_block(struct w1_master *, u8 *, int);
-void w1_search_devices(struct w1_master *dev, w1_slave_found_callback cb);
-int w1_reset_select_slave(struct w1_slave *sl);
-
-#endif /* __W1_IO_H */
diff -urN linux-2.6.18-rc1/fs/Kconfig linux-2.6.18-rc2/fs/Kconfig
--- linux-2.6.18-rc1/fs/Kconfig	2006-07-15 22:34:43.241069530 +0000
+++ linux-2.6.18-rc2/fs/Kconfig	2006-07-15 22:34:48.537644464 +0000
@@ -1801,6 +1801,7 @@
 
 config CIFS_DEBUG2
 	bool "Enable additional CIFS debugging routines"
+	depends on CIFS
 	help
 	   Enabling this option adds a few more debugging routines
 	   to the cifs code which slightly increases the size of
diff -urN linux-2.6.18-rc1/fs/binfmt_elf.c linux-2.6.18-rc2/fs/binfmt_elf.c
--- linux-2.6.18-rc1/fs/binfmt_elf.c	2006-07-15 22:34:43.249070399 +0000
+++ linux-2.6.18-rc2/fs/binfmt_elf.c	2006-07-15 22:34:48.545645333 +0000
@@ -1185,8 +1185,6 @@
 	return 1;
 }
 
-#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
-
 /* An ELF note in memory */
 struct memelfnote
 {
diff -urN linux-2.6.18-rc1/fs/binfmt_elf_fdpic.c linux-2.6.18-rc2/fs/binfmt_elf_fdpic.c
--- linux-2.6.18-rc1/fs/binfmt_elf_fdpic.c	2006-07-15 22:34:43.249070399 +0000
+++ linux-2.6.18-rc2/fs/binfmt_elf_fdpic.c	2006-07-15 22:34:48.549645767 +0000
@@ -1,6 +1,6 @@
 /* binfmt_elf_fdpic.c: FDPIC ELF binary format
  *
- * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved.
+ * Copyright (C) 2003, 2004, 2006 Red Hat, Inc. All Rights Reserved.
  * Written by David Howells (dhowells@redhat.com)
  * Derived from binfmt_elf.c
  *
@@ -24,7 +24,9 @@
 #include <linux/file.h>
 #include <linux/fcntl.h>
 #include <linux/slab.h>
+#include <linux/pagemap.h>
 #include <linux/highmem.h>
+#include <linux/highuid.h>
 #include <linux/personality.h>
 #include <linux/ptrace.h>
 #include <linux/init.h>
@@ -48,45 +50,59 @@
 #define kdebug(fmt, ...) do {} while(0)
 #endif
 
+#if 0
+#define kdcore(fmt, ...) printk("FDPIC "fmt"\n" ,##__VA_ARGS__ )
+#else
+#define kdcore(fmt, ...) do {} while(0)
+#endif
+
 MODULE_LICENSE("GPL");
 
-static int load_elf_fdpic_binary(struct linux_binprm *bprm, struct pt_regs *regs);
-//static int load_elf_fdpic_library(struct file *);
-static int elf_fdpic_fetch_phdrs(struct elf_fdpic_params *params, struct file *file);
-static int elf_fdpic_map_file(struct elf_fdpic_params *params,
-			      struct file *file,
-			      struct mm_struct *mm,
-			      const char *what);
-
-static int create_elf_fdpic_tables(struct linux_binprm *bprm,
-				   struct mm_struct *mm,
-				   struct elf_fdpic_params *exec_params,
-				   struct elf_fdpic_params *interp_params);
+static int load_elf_fdpic_binary(struct linux_binprm *, struct pt_regs *);
+static int elf_fdpic_fetch_phdrs(struct elf_fdpic_params *, struct file *);
+static int elf_fdpic_map_file(struct elf_fdpic_params *, struct file *,
+			      struct mm_struct *, const char *);
+
+static int create_elf_fdpic_tables(struct linux_binprm *, struct mm_struct *,
+				   struct elf_fdpic_params *,
+				   struct elf_fdpic_params *);
 
 #ifndef CONFIG_MMU
-static int elf_fdpic_transfer_args_to_stack(struct linux_binprm *bprm, unsigned long *_sp);
-static int elf_fdpic_map_file_constdisp_on_uclinux(struct elf_fdpic_params *params,
-						   struct file *file,
-						   struct mm_struct *mm);
+static int elf_fdpic_transfer_args_to_stack(struct linux_binprm *,
+					    unsigned long *);
+static int elf_fdpic_map_file_constdisp_on_uclinux(struct elf_fdpic_params *,
+						   struct file *,
+						   struct mm_struct *);
 #endif
 
-static int elf_fdpic_map_file_by_direct_mmap(struct elf_fdpic_params *params,
-					     struct file *file,
-					     struct mm_struct *mm);
+static int elf_fdpic_map_file_by_direct_mmap(struct elf_fdpic_params *,
+					     struct file *, struct mm_struct *);
+
+#if defined(USE_ELF_CORE_DUMP) && defined(CONFIG_ELF_CORE)
+static int elf_fdpic_core_dump(long, struct pt_regs *, struct file *);
+#endif
 
 static struct linux_binfmt elf_fdpic_format = {
 	.module		= THIS_MODULE,
 	.load_binary	= load_elf_fdpic_binary,
-//	.load_shlib	= load_elf_fdpic_library,
-//	.core_dump	= elf_fdpic_core_dump,
+#if defined(USE_ELF_CORE_DUMP) && defined(CONFIG_ELF_CORE)
+	.core_dump	= elf_fdpic_core_dump,
+#endif
 	.min_coredump	= ELF_EXEC_PAGESIZE,
 };
 
-static int __init init_elf_fdpic_binfmt(void)  { return register_binfmt(&elf_fdpic_format); }
-static void __exit exit_elf_fdpic_binfmt(void) { unregister_binfmt(&elf_fdpic_format); }
+static int __init init_elf_fdpic_binfmt(void)
+{
+	return register_binfmt(&elf_fdpic_format);
+}
+
+static void __exit exit_elf_fdpic_binfmt(void)
+{
+	unregister_binfmt(&elf_fdpic_format);
+}
 
-module_init(init_elf_fdpic_binfmt)
-module_exit(exit_elf_fdpic_binfmt)
+core_initcall(init_elf_fdpic_binfmt);
+module_exit(exit_elf_fdpic_binfmt);
 
 static int is_elf_fdpic(struct elfhdr *hdr, struct file *file)
 {
@@ -105,7 +121,8 @@
 /*
  * read the program headers table into memory
  */
-static int elf_fdpic_fetch_phdrs(struct elf_fdpic_params *params, struct file *file)
+static int elf_fdpic_fetch_phdrs(struct elf_fdpic_params *params,
+				 struct file *file)
 {
 	struct elf32_phdr *phdr;
 	unsigned long size;
@@ -121,7 +138,8 @@
 	if (!params->phdrs)
 		return -ENOMEM;
 
-	retval = kernel_read(file, params->hdr.e_phoff, (char *) params->phdrs, size);
+	retval = kernel_read(file, params->hdr.e_phoff,
+			     (char *) params->phdrs, size);
 	if (retval < 0)
 		return retval;
 
@@ -141,17 +159,24 @@
 	}
 
 	return 0;
-} /* end elf_fdpic_fetch_phdrs() */
+}
 
 /*****************************************************************************/
 /*
  * load an fdpic binary into various bits of memory
  */
-static int load_elf_fdpic_binary(struct linux_binprm *bprm, struct pt_regs *regs)
+static int load_elf_fdpic_binary(struct linux_binprm *bprm,
+				 struct pt_regs *regs)
 {
 	struct elf_fdpic_params exec_params, interp_params;
 	struct elf_phdr *phdr;
-	unsigned long stack_size;
+	unsigned long stack_size, entryaddr;
+#ifndef CONFIG_MMU
+	unsigned long fullsize;
+#endif
+#ifdef ELF_FDPIC_PLAT_INIT
+	unsigned long dynaddr;
+#endif
 	struct file *interpreter = NULL; /* to shut gcc up */
 	char *interpreter_name = NULL;
 	int executable_stack;
@@ -212,7 +237,8 @@
 				goto error;
 			}
 
-			retval = kernel_read(interpreter, 0, bprm->buf, BINPRM_BUF_SIZE);
+			retval = kernel_read(interpreter, 0, bprm->buf,
+					     BINPRM_BUF_SIZE);
 			if (retval < 0)
 				goto error;
 
@@ -295,7 +321,8 @@
 				  &current->mm->start_stack,
 				  &current->mm->start_brk);
 
-	retval = setup_arg_pages(bprm, current->mm->start_stack, executable_stack);
+	retval = setup_arg_pages(bprm, current->mm->start_stack,
+				 executable_stack);
 	if (retval < 0) {
 		send_sig(SIGKILL, current, 0);
 		goto error_kill;
@@ -303,7 +330,8 @@
 #endif
 
 	/* load the executable and interpreter into memory */
-	retval = elf_fdpic_map_file(&exec_params, bprm->file, current->mm, "executable");
+	retval = elf_fdpic_map_file(&exec_params, bprm->file, current->mm,
+				    "executable");
 	if (retval < 0)
 		goto error_kill;
 
@@ -324,7 +352,8 @@
 	if (!current->mm->start_brk)
 		current->mm->start_brk = current->mm->end_data;
 
-	current->mm->brk = current->mm->start_brk = PAGE_ALIGN(current->mm->start_brk);
+	current->mm->brk = current->mm->start_brk =
+		PAGE_ALIGN(current->mm->start_brk);
 
 #else
 	/* create a stack and brk area big enough for everyone
@@ -336,47 +365,45 @@
 		stack_size = PAGE_SIZE * 2;
 
 	down_write(&current->mm->mmap_sem);
-	current->mm->start_brk = do_mmap(NULL,
-					 0,
-					 stack_size,
+	current->mm->start_brk = do_mmap(NULL, 0, stack_size,
 					 PROT_READ | PROT_WRITE | PROT_EXEC,
 					 MAP_PRIVATE | MAP_ANON | MAP_GROWSDOWN,
 					 0);
 
-	if (IS_ERR((void *) current->mm->start_brk)) {
+	if (IS_ERR_VALUE(current->mm->start_brk)) {
 		up_write(&current->mm->mmap_sem);
 		retval = current->mm->start_brk;
 		current->mm->start_brk = 0;
 		goto error_kill;
 	}
 
-	if (do_mremap(current->mm->start_brk,
-		      stack_size,
-		      ksize((char *) current->mm->start_brk),
-		      0, 0
-		      ) == current->mm->start_brk
-	    )
-		stack_size = ksize((char *) current->mm->start_brk);
+	/* expand the stack mapping to use up the entire allocation granule */
+	fullsize = ksize((char *) current->mm->start_brk);
+	if (!IS_ERR_VALUE(do_mremap(current->mm->start_brk, stack_size,
+				    fullsize, 0, 0)))
+		stack_size = fullsize;
 	up_write(&current->mm->mmap_sem);
 
 	current->mm->brk = current->mm->start_brk;
 	current->mm->context.end_brk = current->mm->start_brk;
-	current->mm->context.end_brk += (stack_size > PAGE_SIZE) ? (stack_size - PAGE_SIZE) : 0;
+	current->mm->context.end_brk +=
+		(stack_size > PAGE_SIZE) ? (stack_size - PAGE_SIZE) : 0;
 	current->mm->start_stack = current->mm->start_brk + stack_size;
 #endif
 
 	compute_creds(bprm);
 	current->flags &= ~PF_FORKNOEXEC;
-	if (create_elf_fdpic_tables(bprm, current->mm, &exec_params, &interp_params) < 0)
+	if (create_elf_fdpic_tables(bprm, current->mm,
+				    &exec_params, &interp_params) < 0)
 		goto error_kill;
 
-	kdebug("- start_code  %lx",	(long) current->mm->start_code);
-	kdebug("- end_code    %lx",	(long) current->mm->end_code);
-	kdebug("- start_data  %lx",	(long) current->mm->start_data);
-	kdebug("- end_data    %lx",	(long) current->mm->end_data);
-	kdebug("- start_brk   %lx",	(long) current->mm->start_brk);
-	kdebug("- brk         %lx",	(long) current->mm->brk);
-	kdebug("- start_stack %lx",	(long) current->mm->start_stack);
+	kdebug("- start_code  %lx", current->mm->start_code);
+	kdebug("- end_code    %lx", current->mm->end_code);
+	kdebug("- start_data  %lx", current->mm->start_data);
+	kdebug("- end_data    %lx", current->mm->end_data);
+	kdebug("- start_brk   %lx", current->mm->start_brk);
+	kdebug("- brk         %lx", current->mm->brk);
+	kdebug("- start_stack %lx", current->mm->start_stack);
 
 #ifdef ELF_FDPIC_PLAT_INIT
 	/*
@@ -385,21 +412,18 @@
 	 * example.  This macro performs whatever initialization to
 	 * the regs structure is required.
 	 */
-	ELF_FDPIC_PLAT_INIT(regs,
-			    exec_params.map_addr,
-			    interp_params.map_addr,
-			    interp_params.dynamic_addr ?: exec_params.dynamic_addr
-			    );
+	dynaddr = interp_params.dynamic_addr ?: exec_params.dynamic_addr;
+	ELF_FDPIC_PLAT_INIT(regs, exec_params.map_addr, interp_params.map_addr,
+			    dynaddr);
 #endif
 
 	/* everything is now ready... get the userspace context ready to roll */
-	start_thread(regs,
-		     interp_params.entry_addr ?: exec_params.entry_addr,
-		     current->mm->start_stack);
+	entryaddr = interp_params.entry_addr ?: exec_params.entry_addr;
+	start_thread(regs, entryaddr, current->mm->start_stack);
 
 	if (unlikely(current->ptrace & PT_PTRACED)) {
 		if (current->ptrace & PT_TRACE_EXEC)
-			ptrace_notify ((PTRACE_EVENT_EXEC << 8) | SIGTRAP);
+			ptrace_notify((PTRACE_EVENT_EXEC << 8) | SIGTRAP);
 		else
 			send_sig(SIGTRAP, current, 0);
 	}
@@ -419,11 +443,11 @@
 	return retval;
 
 	/* unrecoverable error - kill the process */
- error_kill:
+error_kill:
 	send_sig(SIGSEGV, current, 0);
 	goto error;
 
-} /* end load_elf_fdpic_binary() */
+}
 
 /*****************************************************************************/
 /*
@@ -459,6 +483,7 @@
 	 */
 	hwcap = ELF_HWCAP;
 	k_platform = ELF_PLATFORM;
+	u_platform = NULL;
 
 	if (k_platform) {
 		platform_len = strlen(k_platform) + 1;
@@ -470,11 +495,11 @@
 
 #if defined(__i386__) && defined(CONFIG_SMP)
 	/* in some cases (e.g. Hyper-Threading), we want to avoid L1 evictions
-	 * by the processes running on the same package. One thing we can do
-	 * is to shuffle the initial stack for them.
+	 * by the processes running on the same package. One thing we can do is
+	 * to shuffle the initial stack for them.
 	 *
-	 * the conditionals here are unneeded, but kept in to make the
-	 * code behaviour the same as pre change unless we have hyperthreaded
+	 * the conditionals here are unneeded, but kept in to make the code
+	 * behaviour the same as pre change unless we have hyperthreaded
 	 * processors. This keeps Mr Marcelo Person happier but should be
 	 * removed for 2.5
 	 */
@@ -497,11 +522,13 @@
 
 	if (interp_params->loadmap) {
 		len = sizeof(struct elf32_fdpic_loadmap);
-		len += sizeof(struct elf32_fdpic_loadseg) * interp_params->loadmap->nsegs;
+		len += sizeof(struct elf32_fdpic_loadseg) *
+			interp_params->loadmap->nsegs;
 		sp = (sp - len) & ~7UL;
 		interp_params->map_addr = sp;
 
-		if (copy_to_user((void __user *) sp, interp_params->loadmap, len) != 0)
+		if (copy_to_user((void __user *) sp, interp_params->loadmap,
+				 len) != 0)
 			return -EFAULT;
 
 		current->mm->context.interp_fdpic_loadmap = (unsigned long) sp;
@@ -525,34 +552,37 @@
 	sp -= sp & 15UL;
 
 	/* put the ELF interpreter info on the stack */
-#define NEW_AUX_ENT(nr, id, val)						\
-	do {									\
-		struct { unsigned long _id, _val; } __user *ent = (void __user *) csp;	\
-		__put_user((id), &ent[nr]._id);					\
-		__put_user((val), &ent[nr]._val);				\
+#define NEW_AUX_ENT(nr, id, val)					\
+	do {								\
+		struct { unsigned long _id, _val; } __user *ent;	\
+									\
+		ent = (void __user *) csp;				\
+		__put_user((id), &ent[nr]._id);				\
+		__put_user((val), &ent[nr]._val);			\
 	} while (0)
 
 	csp -= 2 * sizeof(unsigned long);
 	NEW_AUX_ENT(0, AT_NULL, 0);
 	if (k_platform) {
 		csp -= 2 * sizeof(unsigned long);
-		NEW_AUX_ENT(0, AT_PLATFORM, (elf_addr_t)(unsigned long) u_platform);
+		NEW_AUX_ENT(0, AT_PLATFORM,
+			    (elf_addr_t) (unsigned long) u_platform);
 	}
 
 	csp -= DLINFO_ITEMS * 2 * sizeof(unsigned long);
-	NEW_AUX_ENT( 0, AT_HWCAP,		hwcap);
-	NEW_AUX_ENT( 1, AT_PAGESZ,		PAGE_SIZE);
-	NEW_AUX_ENT( 2, AT_CLKTCK,		CLOCKS_PER_SEC);
-	NEW_AUX_ENT( 3, AT_PHDR,		exec_params->ph_addr);
-	NEW_AUX_ENT( 4, AT_PHENT,		sizeof(struct elf_phdr));
-	NEW_AUX_ENT( 5, AT_PHNUM,		exec_params->hdr.e_phnum);
-	NEW_AUX_ENT( 6,	AT_BASE,		interp_params->elfhdr_addr);
-	NEW_AUX_ENT( 7, AT_FLAGS,		0);
-	NEW_AUX_ENT( 8, AT_ENTRY,		exec_params->entry_addr);
-	NEW_AUX_ENT( 9, AT_UID,			(elf_addr_t) current->uid);
-	NEW_AUX_ENT(10, AT_EUID,		(elf_addr_t) current->euid);
-	NEW_AUX_ENT(11, AT_GID,			(elf_addr_t) current->gid);
-	NEW_AUX_ENT(12, AT_EGID,		(elf_addr_t) current->egid);
+	NEW_AUX_ENT( 0, AT_HWCAP,	hwcap);
+	NEW_AUX_ENT( 1, AT_PAGESZ,	PAGE_SIZE);
+	NEW_AUX_ENT( 2, AT_CLKTCK,	CLOCKS_PER_SEC);
+	NEW_AUX_ENT( 3, AT_PHDR,	exec_params->ph_addr);
+	NEW_AUX_ENT( 4, AT_PHENT,	sizeof(struct elf_phdr));
+	NEW_AUX_ENT( 5, AT_PHNUM,	exec_params->hdr.e_phnum);
+	NEW_AUX_ENT( 6,	AT_BASE,	interp_params->elfhdr_addr);
+	NEW_AUX_ENT( 7, AT_FLAGS,	0);
+	NEW_AUX_ENT( 8, AT_ENTRY,	exec_params->entry_addr);
+	NEW_AUX_ENT( 9, AT_UID,		(elf_addr_t) current->uid);
+	NEW_AUX_ENT(10, AT_EUID,	(elf_addr_t) current->euid);
+	NEW_AUX_ENT(11, AT_GID,		(elf_addr_t) current->gid);
+	NEW_AUX_ENT(12, AT_EGID,	(elf_addr_t) current->egid);
 
 #ifdef ARCH_DLINFO
 	/* ARCH_DLINFO must come last so platform specific code can enforce
@@ -578,7 +608,8 @@
 #ifdef CONFIG_MMU
 	current->mm->arg_start = bprm->p;
 #else
-	current->mm->arg_start = current->mm->start_stack - (MAX_ARG_PAGES * PAGE_SIZE - bprm->p);
+	current->mm->arg_start = current->mm->start_stack -
+		(MAX_ARG_PAGES * PAGE_SIZE - bprm->p);
 #endif
 
 	p = (char __user *) current->mm->arg_start;
@@ -606,7 +637,7 @@
 
 	mm->start_stack = (unsigned long) sp;
 	return 0;
-} /* end create_elf_fdpic_tables() */
+}
 
 /*****************************************************************************/
 /*
@@ -614,7 +645,8 @@
  * the stack
  */
 #ifndef CONFIG_MMU
-static int elf_fdpic_transfer_args_to_stack(struct linux_binprm *bprm, unsigned long *_sp)
+static int elf_fdpic_transfer_args_to_stack(struct linux_binprm *bprm,
+					    unsigned long *_sp)
 {
 	unsigned long index, stop, sp;
 	char *src;
@@ -635,9 +667,9 @@
 
 	*_sp = (*_sp - (MAX_ARG_PAGES * PAGE_SIZE - bprm->p)) & ~15;
 
- out:
+out:
 	return ret;
-} /* end elf_fdpic_transfer_args_to_stack() */
+}
 #endif
 
 /*****************************************************************************/
@@ -712,17 +744,18 @@
 		seg = loadmap->segs;
 		for (loop = loadmap->nsegs; loop > 0; loop--, seg++) {
 			if (params->hdr.e_entry >= seg->p_vaddr &&
-			    params->hdr.e_entry < seg->p_vaddr + seg->p_memsz
-			    ) {
+			    params->hdr.e_entry < seg->p_vaddr + seg->p_memsz) {
 				params->entry_addr =
-					(params->hdr.e_entry - seg->p_vaddr) + seg->addr;
+					(params->hdr.e_entry - seg->p_vaddr) +
+					seg->addr;
 				break;
 			}
 		}
 	}
 
 	/* determine where the program header table has wound up if mapped */
-	stop = params->hdr.e_phoff + params->hdr.e_phnum * sizeof (struct elf_phdr);
+	stop = params->hdr.e_phoff;
+	stop += params->hdr.e_phnum * sizeof (struct elf_phdr);
 	phdr = params->phdrs;
 
 	for (loop = 0; loop < params->hdr.e_phnum; loop++, phdr++) {
@@ -736,9 +769,11 @@
 		seg = loadmap->segs;
 		for (loop = loadmap->nsegs; loop > 0; loop--, seg++) {
 			if (phdr->p_vaddr >= seg->p_vaddr &&
-			    phdr->p_vaddr + phdr->p_filesz <= seg->p_vaddr + seg->p_memsz
-			    ) {
-				params->ph_addr = (phdr->p_vaddr - seg->p_vaddr) + seg->addr +
+			    phdr->p_vaddr + phdr->p_filesz <=
+			    seg->p_vaddr + seg->p_memsz) {
+				params->ph_addr =
+					(phdr->p_vaddr - seg->p_vaddr) +
+					seg->addr +
 					params->hdr.e_phoff - phdr->p_offset;
 				break;
 			}
@@ -755,18 +790,22 @@
 		seg = loadmap->segs;
 		for (loop = loadmap->nsegs; loop > 0; loop--, seg++) {
 			if (phdr->p_vaddr >= seg->p_vaddr &&
-			    phdr->p_vaddr + phdr->p_memsz <= seg->p_vaddr + seg->p_memsz
-			    ) {
-				params->dynamic_addr = (phdr->p_vaddr - seg->p_vaddr) + seg->addr;
-
-				/* check the dynamic section contains at least one item, and that
-				 * the last item is a NULL entry */
+			    phdr->p_vaddr + phdr->p_memsz <=
+			    seg->p_vaddr + seg->p_memsz) {
+				params->dynamic_addr =
+					(phdr->p_vaddr - seg->p_vaddr) +
+					seg->addr;
+
+				/* check the dynamic section contains at least
+				 * one item, and that the last item is a NULL
+				 * entry */
 				if (phdr->p_memsz == 0 ||
 				    phdr->p_memsz % sizeof(Elf32_Dyn) != 0)
 					goto dynamic_error;
 
 				tmp = phdr->p_memsz / sizeof(Elf32_Dyn);
-				if (((Elf32_Dyn *) params->dynamic_addr)[tmp - 1].d_tag != 0)
+				if (((Elf32_Dyn *)
+				     params->dynamic_addr)[tmp - 1].d_tag != 0)
 					goto dynamic_error;
 				break;
 			}
@@ -775,8 +814,8 @@
 	}
 
 	/* now elide adjacent segments in the load map on MMU linux
-	 * - on uClinux the holes between may actually be filled with system stuff or stuff from
-	 *   other processes
+	 * - on uClinux the holes between may actually be filled with system
+	 *   stuff or stuff from other processes
 	 */
 #ifdef CONFIG_MMU
 	nloads = loadmap->nsegs;
@@ -787,7 +826,9 @@
 		if (seg->p_vaddr - mseg->p_vaddr == seg->addr - mseg->addr) {
 			load_addr = PAGE_ALIGN(mseg->addr + mseg->p_memsz);
 			if (load_addr == (seg->addr & PAGE_MASK)) {
-				mseg->p_memsz += load_addr - (mseg->addr + mseg->p_memsz);
+				mseg->p_memsz +=
+					load_addr -
+					(mseg->addr + mseg->p_memsz);
 				mseg->p_memsz += seg->addr & ~PAGE_MASK;
 				mseg->p_memsz += seg->p_memsz;
 				loadmap->nsegs--;
@@ -815,20 +856,21 @@
 
 	return 0;
 
- dynamic_error:
+dynamic_error:
 	printk("ELF FDPIC %s with invalid DYNAMIC section (inode=%lu)\n",
 	       what, file->f_dentry->d_inode->i_ino);
 	return -ELIBBAD;
-} /* end elf_fdpic_map_file() */
+}
 
 /*****************************************************************************/
 /*
  * map a file with constant displacement under uClinux
  */
 #ifndef CONFIG_MMU
-static int elf_fdpic_map_file_constdisp_on_uclinux(struct elf_fdpic_params *params,
-						   struct file *file,
-						   struct mm_struct *mm)
+static int elf_fdpic_map_file_constdisp_on_uclinux(
+	struct elf_fdpic_params *params,
+	struct file *file,
+	struct mm_struct *mm)
 {
 	struct elf32_fdpic_loadseg *seg;
 	struct elf32_phdr *phdr;
@@ -839,7 +881,8 @@
 	load_addr = params->load_addr;
 	seg = params->loadmap->segs;
 
-	/* determine the bounds of the contiguous overall allocation we must make */
+	/* determine the bounds of the contiguous overall allocation we must
+	 * make */
 	phdr = params->phdrs;
 	for (loop = 0; loop < params->hdr.e_phnum; loop++, phdr++) {
 		if (params->phdrs[loop].p_type != PT_LOAD)
@@ -860,7 +903,7 @@
 	maddr = do_mmap(NULL, load_addr, top - base,
 			PROT_READ | PROT_WRITE | PROT_EXEC, mflags, 0);
 	up_write(&mm->mmap_sem);
-	if (IS_ERR((void *) maddr))
+	if (IS_ERR_VALUE(maddr))
 		return (int) maddr;
 
 	if (load_addr != 0)
@@ -878,7 +921,8 @@
 		seg->p_vaddr = phdr->p_vaddr;
 		seg->p_memsz = phdr->p_memsz;
 
-		ret = file->f_op->read(file, (void *) seg->addr, phdr->p_filesz, &fpos);
+		ret = file->f_op->read(file, (void *) seg->addr,
+				       phdr->p_filesz, &fpos);
 		if (ret < 0)
 			return ret;
 
@@ -895,8 +939,7 @@
 			if (phdr->p_flags & PF_X) {
 				mm->start_code = seg->addr;
 				mm->end_code = seg->addr + phdr->p_memsz;
-			}
-			else if (!mm->start_data) {
+			} else if (!mm->start_data) {
 				mm->start_data = seg->addr;
 #ifndef CONFIG_MMU
 				mm->end_data = seg->addr + phdr->p_memsz;
@@ -913,7 +956,7 @@
 	}
 
 	return 0;
-} /* end elf_fdpic_map_file_constdisp_on_uclinux() */
+}
 #endif
 
 /*****************************************************************************/
@@ -974,14 +1017,14 @@
 
 		case ELF_FDPIC_FLAG_CONSTDISP:
 			/* constant displacement
-			 * - can be mapped anywhere, but must be mapped as a unit
+			 * - can be mapped anywhere, but must be mapped as a
+			 *   unit
 			 */
 			if (!dvset) {
 				maddr = load_addr;
 				delta_vaddr = phdr->p_vaddr;
 				dvset = 1;
-			}
-			else {
+			} else {
 				maddr = load_addr + phdr->p_vaddr - delta_vaddr;
 				flags |= MAP_FIXED;
 			}
@@ -1005,13 +1048,14 @@
 		up_write(&mm->mmap_sem);
 
 		kdebug("mmap[%d] <file> sz=%lx pr=%x fl=%x of=%lx --> %08lx",
-		       loop, phdr->p_memsz + disp, prot, flags, phdr->p_offset - disp,
-		       maddr);
+		       loop, phdr->p_memsz + disp, prot, flags,
+		       phdr->p_offset - disp, maddr);
 
-		if (IS_ERR((void *) maddr))
+		if (IS_ERR_VALUE(maddr))
 			return (int) maddr;
 
-		if ((params->flags & ELF_FDPIC_FLAG_ARRANGEMENT) == ELF_FDPIC_FLAG_CONTIGUOUS)
+		if ((params->flags & ELF_FDPIC_FLAG_ARRANGEMENT) ==
+		    ELF_FDPIC_FLAG_CONTIGUOUS)
 			load_addr += PAGE_ALIGN(phdr->p_memsz + disp);
 
 		seg->addr = maddr + disp;
@@ -1022,7 +1066,8 @@
 		if (phdr->p_offset == 0)
 			params->elfhdr_addr = seg->addr;
 
-		/* clear the bit between beginning of mapping and beginning of PT_LOAD */
+		/* clear the bit between beginning of mapping and beginning of
+		 * PT_LOAD */
 		if (prot & PROT_WRITE && disp > 0) {
 			kdebug("clear[%d] ad=%lx sz=%lx", loop, maddr, disp);
 			clear_user((void __user *) maddr, disp);
@@ -1038,19 +1083,20 @@
 		excess1 = PAGE_SIZE - ((maddr + phdr->p_filesz) & ~PAGE_MASK);
 
 #ifdef CONFIG_MMU
-
 		if (excess > excess1) {
 			unsigned long xaddr = maddr + phdr->p_filesz + excess1;
 			unsigned long xmaddr;
 
 			flags |= MAP_FIXED | MAP_ANONYMOUS;
 			down_write(&mm->mmap_sem);
-			xmaddr = do_mmap(NULL, xaddr, excess - excess1, prot, flags, 0);
+			xmaddr = do_mmap(NULL, xaddr, excess - excess1,
+					 prot, flags, 0);
 			up_write(&mm->mmap_sem);
 
 			kdebug("mmap[%d] <anon>"
 			       " ad=%lx sz=%lx pr=%x fl=%x of=0 --> %08lx",
-			       loop, xaddr, excess - excess1, prot, flags, xmaddr);
+			       loop, xaddr, excess - excess1, prot, flags,
+			       xmaddr);
 
 			if (xmaddr != xaddr)
 				return -ENOMEM;
@@ -1059,7 +1105,8 @@
 		if (prot & PROT_WRITE && excess1 > 0) {
 			kdebug("clear[%d] ad=%lx sz=%lx",
 			       loop, maddr + phdr->p_filesz, excess1);
-			clear_user((void __user *) maddr + phdr->p_filesz, excess1);
+			clear_user((void __user *) maddr + phdr->p_filesz,
+				   excess1);
 		}
 
 #else
@@ -1074,8 +1121,7 @@
 			if (phdr->p_flags & PF_X) {
 				mm->start_code = maddr;
 				mm->end_code = maddr + phdr->p_memsz;
-			}
-			else if (!mm->start_data) {
+			} else if (!mm->start_data) {
 				mm->start_data = maddr;
 				mm->end_data = maddr + phdr->p_memsz;
 			}
@@ -1085,4 +1131,662 @@
 	}
 
 	return 0;
-} /* end elf_fdpic_map_file_by_direct_mmap() */
+}
+
+/*****************************************************************************/
+/*
+ * ELF-FDPIC core dumper
+ *
+ * Modelled on fs/exec.c:aout_core_dump()
+ * Jeremy Fitzhardinge <jeremy@sw.oz.au>
+ *
+ * Modelled on fs/binfmt_elf.c core dumper
+ */
+#if defined(USE_ELF_CORE_DUMP) && defined(CONFIG_ELF_CORE)
+
+/*
+ * These are the only things you should do on a core-file: use only these
+ * functions to write out all the necessary info.
+ */
+static int dump_write(struct file *file, const void *addr, int nr)
+{
+	return file->f_op->write(file, addr, nr, &file->f_pos) == nr;
+}
+
+static int dump_seek(struct file *file, loff_t off)
+{
+	if (file->f_op->llseek) {
+		if (file->f_op->llseek(file, off, SEEK_SET) != off)
+			return 0;
+	} else {
+		file->f_pos = off;
+	}
+	return 1;
+}
+
+/*
+ * Decide whether a segment is worth dumping; default is yes to be
+ * sure (missing info is worse than too much; etc).
+ * Personally I'd include everything, and use the coredump limit...
+ *
+ * I think we should skip something. But I am not sure how. H.J.
+ */
+static int maydump(struct vm_area_struct *vma)
+{
+	/* Do not dump I/O mapped devices or special mappings */
+	if (vma->vm_flags & (VM_IO | VM_RESERVED)) {
+		kdcore("%08lx: %08lx: no (IO)", vma->vm_start, vma->vm_flags);
+		return 0;
+	}
+
+	/* If we may not read the contents, don't allow us to dump
+	 * them either. "dump_write()" can't handle it anyway.
+	 */
+	if (!(vma->vm_flags & VM_READ)) {
+		kdcore("%08lx: %08lx: no (!read)", vma->vm_start, vma->vm_flags);
+		return 0;
+	}
+
+	/* Dump shared memory only if mapped from an anonymous file. */
+	if (vma->vm_flags & VM_SHARED) {
+		if (vma->vm_file->f_dentry->d_inode->i_nlink == 0) {
+			kdcore("%08lx: %08lx: no (share)", vma->vm_start, vma->vm_flags);
+			return 1;
+		}
+
+		kdcore("%08lx: %08lx: no (share)", vma->vm_start, vma->vm_flags);
+		return 0;
+	}
+
+#ifdef CONFIG_MMU
+	/* If it hasn't been written to, don't write it out */
+	if (!vma->anon_vma) {
+		kdcore("%08lx: %08lx: no (!anon)", vma->vm_start, vma->vm_flags);
+		return 0;
+	}
+#endif
+
+	kdcore("%08lx: %08lx: yes", vma->vm_start, vma->vm_flags);
+	return 1;
+}
+
+/* An ELF note in memory */
+struct memelfnote
+{
+	const char *name;
+	int type;
+	unsigned int datasz;
+	void *data;
+};
+
+static int notesize(struct memelfnote *en)
+{
+	int sz;
+
+	sz = sizeof(struct elf_note);
+	sz += roundup(strlen(en->name) + 1, 4);
+	sz += roundup(en->datasz, 4);
+
+	return sz;
+}
+
+/* #define DEBUG */
+
+#define DUMP_WRITE(addr, nr)	\
+	do { if (!dump_write(file, (addr), (nr))) return 0; } while(0)
+#define DUMP_SEEK(off)	\
+	do { if (!dump_seek(file, (off))) return 0; } while(0)
+
+static int writenote(struct memelfnote *men, struct file *file)
+{
+	struct elf_note en;
+
+	en.n_namesz = strlen(men->name) + 1;
+	en.n_descsz = men->datasz;
+	en.n_type = men->type;
+
+	DUMP_WRITE(&en, sizeof(en));
+	DUMP_WRITE(men->name, en.n_namesz);
+	/* XXX - cast from long long to long to avoid need for libgcc.a */
+	DUMP_SEEK(roundup((unsigned long)file->f_pos, 4));	/* XXX */
+	DUMP_WRITE(men->data, men->datasz);
+	DUMP_SEEK(roundup((unsigned long)file->f_pos, 4));	/* XXX */
+
+	return 1;
+}
+#undef DUMP_WRITE
+#undef DUMP_SEEK
+
+#define DUMP_WRITE(addr, nr)	\
+	if ((size += (nr)) > limit || !dump_write(file, (addr), (nr))) \
+		goto end_coredump;
+#define DUMP_SEEK(off)	\
+	if (!dump_seek(file, (off))) \
+		goto end_coredump;
+
+static inline void fill_elf_fdpic_header(struct elfhdr *elf, int segs)
+{
+	memcpy(elf->e_ident, ELFMAG, SELFMAG);
+	elf->e_ident[EI_CLASS] = ELF_CLASS;
+	elf->e_ident[EI_DATA] = ELF_DATA;
+	elf->e_ident[EI_VERSION] = EV_CURRENT;
+	elf->e_ident[EI_OSABI] = ELF_OSABI;
+	memset(elf->e_ident+EI_PAD, 0, EI_NIDENT-EI_PAD);
+
+	elf->e_type = ET_CORE;
+	elf->e_machine = ELF_ARCH;
+	elf->e_version = EV_CURRENT;
+	elf->e_entry = 0;
+	elf->e_phoff = sizeof(struct elfhdr);
+	elf->e_shoff = 0;
+	elf->e_flags = ELF_FDPIC_CORE_EFLAGS;
+	elf->e_ehsize = sizeof(struct elfhdr);
+	elf->e_phentsize = sizeof(struct elf_phdr);
+	elf->e_phnum = segs;
+	elf->e_shentsize = 0;
+	elf->e_shnum = 0;
+	elf->e_shstrndx = 0;
+	return;
+}
+
+static inline void fill_elf_note_phdr(struct elf_phdr *phdr, int sz, loff_t offset)
+{
+	phdr->p_type = PT_NOTE;
+	phdr->p_offset = offset;
+	phdr->p_vaddr = 0;
+	phdr->p_paddr = 0;
+	phdr->p_filesz = sz;
+	phdr->p_memsz = 0;
+	phdr->p_flags = 0;
+	phdr->p_align = 0;
+	return;
+}
+
+static inline void fill_note(struct memelfnote *note, const char *name, int type,
+		unsigned int sz, void *data)
+{
+	note->name = name;
+	note->type = type;
+	note->datasz = sz;
+	note->data = data;
+	return;
+}
+
+/*
+ * fill up all the fields in prstatus from the given task struct, except
+ * registers which need to be filled up seperately.
+ */
+static void fill_prstatus(struct elf_prstatus *prstatus,
+			  struct task_struct *p, long signr)
+{
+	prstatus->pr_info.si_signo = prstatus->pr_cursig = signr;
+	prstatus->pr_sigpend = p->pending.signal.sig[0];
+	prstatus->pr_sighold = p->blocked.sig[0];
+	prstatus->pr_pid = p->pid;
+	prstatus->pr_ppid = p->parent->pid;
+	prstatus->pr_pgrp = process_group(p);
+	prstatus->pr_sid = p->signal->session;
+	if (thread_group_leader(p)) {
+		/*
+		 * This is the record for the group leader.  Add in the
+		 * cumulative times of previous dead threads.  This total
+		 * won't include the time of each live thread whose state
+		 * is included in the core dump.  The final total reported
+		 * to our parent process when it calls wait4 will include
+		 * those sums as well as the little bit more time it takes
+		 * this and each other thread to finish dying after the
+		 * core dump synchronization phase.
+		 */
+		cputime_to_timeval(cputime_add(p->utime, p->signal->utime),
+				   &prstatus->pr_utime);
+		cputime_to_timeval(cputime_add(p->stime, p->signal->stime),
+				   &prstatus->pr_stime);
+	} else {
+		cputime_to_timeval(p->utime, &prstatus->pr_utime);
+		cputime_to_timeval(p->stime, &prstatus->pr_stime);
+	}
+	cputime_to_timeval(p->signal->cutime, &prstatus->pr_cutime);
+	cputime_to_timeval(p->signal->cstime, &prstatus->pr_cstime);
+
+	prstatus->pr_exec_fdpic_loadmap = p->mm->context.exec_fdpic_loadmap;
+	prstatus->pr_interp_fdpic_loadmap = p->mm->context.interp_fdpic_loadmap;
+}
+
+static int fill_psinfo(struct elf_prpsinfo *psinfo, struct task_struct *p,
+		       struct mm_struct *mm)
+{
+	unsigned int i, len;
+
+	/* first copy the parameters from user space */
+	memset(psinfo, 0, sizeof(struct elf_prpsinfo));
+
+	len = mm->arg_end - mm->arg_start;
+	if (len >= ELF_PRARGSZ)
+		len = ELF_PRARGSZ - 1;
+	if (copy_from_user(&psinfo->pr_psargs,
+		           (const char __user *) mm->arg_start, len))
+		return -EFAULT;
+	for (i = 0; i < len; i++)
+		if (psinfo->pr_psargs[i] == 0)
+			psinfo->pr_psargs[i] = ' ';
+	psinfo->pr_psargs[len] = 0;
+
+	psinfo->pr_pid = p->pid;
+	psinfo->pr_ppid = p->parent->pid;
+	psinfo->pr_pgrp = process_group(p);
+	psinfo->pr_sid = p->signal->session;
+
+	i = p->state ? ffz(~p->state) + 1 : 0;
+	psinfo->pr_state = i;
+	psinfo->pr_sname = (i > 5) ? '.' : "RSDTZW"[i];
+	psinfo->pr_zomb = psinfo->pr_sname == 'Z';
+	psinfo->pr_nice = task_nice(p);
+	psinfo->pr_flag = p->flags;
+	SET_UID(psinfo->pr_uid, p->uid);
+	SET_GID(psinfo->pr_gid, p->gid);
+	strncpy(psinfo->pr_fname, p->comm, sizeof(psinfo->pr_fname));
+
+	return 0;
+}
+
+/* Here is the structure in which status of each thread is captured. */
+struct elf_thread_status
+{
+	struct list_head list;
+	struct elf_prstatus prstatus;	/* NT_PRSTATUS */
+	elf_fpregset_t fpu;		/* NT_PRFPREG */
+	struct task_struct *thread;
+#ifdef ELF_CORE_COPY_XFPREGS
+	elf_fpxregset_t xfpu;		/* NT_PRXFPREG */
+#endif
+	struct memelfnote notes[3];
+	int num_notes;
+};
+
+/*
+ * In order to add the specific thread information for the elf file format,
+ * we need to keep a linked list of every thread's pr_status and then create
+ * a single section for them in the final core file.
+ */
+static int elf_dump_thread_status(long signr, struct elf_thread_status *t)
+{
+	struct task_struct *p = t->thread;
+	int sz = 0;
+
+	t->num_notes = 0;
+
+	fill_prstatus(&t->prstatus, p, signr);
+	elf_core_copy_task_regs(p, &t->prstatus.pr_reg);
+
+	fill_note(&t->notes[0], "CORE", NT_PRSTATUS, sizeof(t->prstatus),
+		  &t->prstatus);
+	t->num_notes++;
+	sz += notesize(&t->notes[0]);
+
+	t->prstatus.pr_fpvalid = elf_core_copy_task_fpregs(p, NULL, &t->fpu);
+	if (t->prstatus.pr_fpvalid) {
+		fill_note(&t->notes[1], "CORE", NT_PRFPREG, sizeof(t->fpu),
+			  &t->fpu);
+		t->num_notes++;
+		sz += notesize(&t->notes[1]);
+	}
+
+#ifdef ELF_CORE_COPY_XFPREGS
+	if (elf_core_copy_task_xfpregs(p, &t->xfpu)) {
+		fill_note(&t->notes[2], "LINUX", NT_PRXFPREG, sizeof(t->xfpu),
+			  &t->xfpu);
+		t->num_notes++;
+		sz += notesize(&t->notes[2]);
+	}
+#endif
+	return sz;
+}
+
+/*
+ * dump the segments for an MMU process
+ */
+#ifdef CONFIG_MMU
+static int elf_fdpic_dump_segments(struct file *file, struct mm_struct *mm,
+				   size_t *size, unsigned long *limit)
+{
+	struct vm_area_struct *vma;
+
+	for (vma = current->mm->mmap; vma; vma = vma->vm_next) {
+		unsigned long addr;
+
+		if (!maydump(vma))
+			continue;
+
+		for (addr = vma->vm_start;
+		     addr < vma->vm_end;
+		     addr += PAGE_SIZE
+		     ) {
+			struct vm_area_struct *vma;
+			struct page *page;
+
+			if (get_user_pages(current, current->mm, addr, 1, 0, 1,
+					   &page, &vma) <= 0) {
+				DUMP_SEEK(file->f_pos + PAGE_SIZE);
+			}
+			else if (page == ZERO_PAGE(addr)) {
+				DUMP_SEEK(file->f_pos + PAGE_SIZE);
+				page_cache_release(page);
+			}
+			else {
+				void *kaddr;
+
+				flush_cache_page(vma, addr, page_to_pfn(page));
+				kaddr = kmap(page);
+				if ((*size += PAGE_SIZE) > *limit ||
+				    !dump_write(file, kaddr, PAGE_SIZE)
+				    ) {
+					kunmap(page);
+					page_cache_release(page);
+					return -EIO;
+				}
+				kunmap(page);
+				page_cache_release(page);
+			}
+		}
+	}
+
+	return 0;
+
+end_coredump:
+	return -EFBIG;
+}
+#endif
+
+/*
+ * dump the segments for a NOMMU process
+ */
+#ifndef CONFIG_MMU
+static int elf_fdpic_dump_segments(struct file *file, struct mm_struct *mm,
+				   size_t *size, unsigned long *limit)
+{
+	struct vm_list_struct *vml;
+
+	for (vml = current->mm->context.vmlist; vml; vml = vml->next) {
+	struct vm_area_struct *vma = vml->vma;
+
+		if (!maydump(vma))
+			continue;
+
+		if ((*size += PAGE_SIZE) > *limit)
+			return -EFBIG;
+
+		if (!dump_write(file, (void *) vma->vm_start,
+				vma->vm_end - vma->vm_start))
+			return -EIO;
+	}
+
+	return 0;
+}
+#endif
+
+/*
+ * Actual dumper
+ *
+ * This is a two-pass process; first we find the offsets of the bits,
+ * and then they are actually written out.  If we run out of core limit
+ * we just truncate.
+ */
+static int elf_fdpic_core_dump(long signr, struct pt_regs *regs,
+			       struct file *file)
+{
+#define	NUM_NOTES	6
+	int has_dumped = 0;
+	mm_segment_t fs;
+	int segs;
+	size_t size = 0;
+	int i;
+	struct vm_area_struct *vma;
+	struct elfhdr *elf = NULL;
+	loff_t offset = 0, dataoff;
+	unsigned long limit = current->signal->rlim[RLIMIT_CORE].rlim_cur;
+	int numnote;
+	struct memelfnote *notes = NULL;
+	struct elf_prstatus *prstatus = NULL;	/* NT_PRSTATUS */
+	struct elf_prpsinfo *psinfo = NULL;	/* NT_PRPSINFO */
+ 	struct task_struct *g, *p;
+ 	LIST_HEAD(thread_list);
+ 	struct list_head *t;
+	elf_fpregset_t *fpu = NULL;
+#ifdef ELF_CORE_COPY_XFPREGS
+	elf_fpxregset_t *xfpu = NULL;
+#endif
+	int thread_status_size = 0;
+#ifndef CONFIG_MMU
+	struct vm_list_struct *vml;
+#endif
+	elf_addr_t *auxv;
+
+	/*
+	 * We no longer stop all VM operations.
+	 *
+	 * This is because those proceses that could possibly change map_count
+	 * or the mmap / vma pages are now blocked in do_exit on current
+	 * finishing this core dump.
+	 *
+	 * Only ptrace can touch these memory addresses, but it doesn't change
+	 * the map_count or the pages allocated. So no possibility of crashing
+	 * exists while dumping the mm->vm_next areas to the core file.
+	 */
+
+	/* alloc memory for large data structures: too large to be on stack */
+	elf = kmalloc(sizeof(*elf), GFP_KERNEL);
+	if (!elf)
+		goto cleanup;
+	prstatus = kzalloc(sizeof(*prstatus), GFP_KERNEL);
+	if (!prstatus)
+		goto cleanup;
+	psinfo = kmalloc(sizeof(*psinfo), GFP_KERNEL);
+	if (!psinfo)
+		goto cleanup;
+	notes = kmalloc(NUM_NOTES * sizeof(struct memelfnote), GFP_KERNEL);
+	if (!notes)
+		goto cleanup;
+	fpu = kmalloc(sizeof(*fpu), GFP_KERNEL);
+	if (!fpu)
+		goto cleanup;
+#ifdef ELF_CORE_COPY_XFPREGS
+	xfpu = kmalloc(sizeof(*xfpu), GFP_KERNEL);
+	if (!xfpu)
+		goto cleanup;
+#endif
+
+	if (signr) {
+		struct elf_thread_status *tmp;
+		read_lock(&tasklist_lock);
+		do_each_thread(g,p)
+			if (current->mm == p->mm && current != p) {
+				tmp = kzalloc(sizeof(*tmp), GFP_ATOMIC);
+				if (!tmp) {
+					read_unlock(&tasklist_lock);
+					goto cleanup;
+				}
+				INIT_LIST_HEAD(&tmp->list);
+				tmp->thread = p;
+				list_add(&tmp->list, &thread_list);
+			}
+		while_each_thread(g,p);
+		read_unlock(&tasklist_lock);
+		list_for_each(t, &thread_list) {
+			struct elf_thread_status *tmp;
+			int sz;
+
+			tmp = list_entry(t, struct elf_thread_status, list);
+			sz = elf_dump_thread_status(signr, tmp);
+			thread_status_size += sz;
+		}
+	}
+
+	/* now collect the dump for the current */
+	fill_prstatus(prstatus, current, signr);
+	elf_core_copy_regs(&prstatus->pr_reg, regs);
+
+#ifdef CONFIG_MMU
+	segs = current->mm->map_count;
+#else
+	segs = 0;
+	for (vml = current->mm->context.vmlist; vml; vml = vml->next)
+	    segs++;
+#endif
+#ifdef ELF_CORE_EXTRA_PHDRS
+	segs += ELF_CORE_EXTRA_PHDRS;
+#endif
+
+	/* Set up header */
+	fill_elf_fdpic_header(elf, segs + 1);	/* including notes section */
+
+	has_dumped = 1;
+	current->flags |= PF_DUMPCORE;
+
+	/*
+	 * Set up the notes in similar form to SVR4 core dumps made
+	 * with info from their /proc.
+	 */
+
+	fill_note(notes + 0, "CORE", NT_PRSTATUS, sizeof(*prstatus), prstatus);
+	fill_psinfo(psinfo, current->group_leader, current->mm);
+	fill_note(notes + 1, "CORE", NT_PRPSINFO, sizeof(*psinfo), psinfo);
+
+	numnote = 2;
+
+	auxv = (elf_addr_t *) current->mm->saved_auxv;
+
+	i = 0;
+	do
+		i += 2;
+	while (auxv[i - 2] != AT_NULL);
+	fill_note(&notes[numnote++], "CORE", NT_AUXV,
+		  i * sizeof(elf_addr_t), auxv);
+
+  	/* Try to dump the FPU. */
+	if ((prstatus->pr_fpvalid =
+	     elf_core_copy_task_fpregs(current, regs, fpu)))
+		fill_note(notes + numnote++,
+			  "CORE", NT_PRFPREG, sizeof(*fpu), fpu);
+#ifdef ELF_CORE_COPY_XFPREGS
+	if (elf_core_copy_task_xfpregs(current, xfpu))
+		fill_note(notes + numnote++,
+			  "LINUX", NT_PRXFPREG, sizeof(*xfpu), xfpu);
+#endif
+
+	fs = get_fs();
+	set_fs(KERNEL_DS);
+
+	DUMP_WRITE(elf, sizeof(*elf));
+	offset += sizeof(*elf);				/* Elf header */
+	offset += (segs+1) * sizeof(struct elf_phdr);	/* Program headers */
+
+	/* Write notes phdr entry */
+	{
+		struct elf_phdr phdr;
+		int sz = 0;
+
+		for (i = 0; i < numnote; i++)
+			sz += notesize(notes + i);
+
+		sz += thread_status_size;
+
+		fill_elf_note_phdr(&phdr, sz, offset);
+		offset += sz;
+		DUMP_WRITE(&phdr, sizeof(phdr));
+	}
+
+	/* Page-align dumped data */
+	dataoff = offset = roundup(offset, ELF_EXEC_PAGESIZE);
+
+	/* write program headers for segments dump */
+	for (
+#ifdef CONFIG_MMU
+		vma = current->mm->mmap; vma; vma = vma->vm_next
+#else
+			vml = current->mm->context.vmlist; vml; vml = vml->next
+#endif
+	     ) {
+		struct elf_phdr phdr;
+		size_t sz;
+
+#ifndef CONFIG_MMU
+		vma = vml->vma;
+#endif
+
+		sz = vma->vm_end - vma->vm_start;
+
+		phdr.p_type = PT_LOAD;
+		phdr.p_offset = offset;
+		phdr.p_vaddr = vma->vm_start;
+		phdr.p_paddr = 0;
+		phdr.p_filesz = maydump(vma) ? sz : 0;
+		phdr.p_memsz = sz;
+		offset += phdr.p_filesz;
+		phdr.p_flags = vma->vm_flags & VM_READ ? PF_R : 0;
+		if (vma->vm_flags & VM_WRITE)
+			phdr.p_flags |= PF_W;
+		if (vma->vm_flags & VM_EXEC)
+			phdr.p_flags |= PF_X;
+		phdr.p_align = ELF_EXEC_PAGESIZE;
+
+		DUMP_WRITE(&phdr, sizeof(phdr));
+	}
+
+#ifdef ELF_CORE_WRITE_EXTRA_PHDRS
+	ELF_CORE_WRITE_EXTRA_PHDRS;
+#endif
+
+ 	/* write out the notes section */
+	for (i = 0; i < numnote; i++)
+		if (!writenote(notes + i, file))
+			goto end_coredump;
+
+	/* write out the thread status notes section */
+	list_for_each(t, &thread_list) {
+		struct elf_thread_status *tmp =
+				list_entry(t, struct elf_thread_status, list);
+
+		for (i = 0; i < tmp->num_notes; i++)
+			if (!writenote(&tmp->notes[i], file))
+				goto end_coredump;
+	}
+
+	DUMP_SEEK(dataoff);
+
+	if (elf_fdpic_dump_segments(file, current->mm, &size, &limit) < 0)
+		goto end_coredump;
+
+#ifdef ELF_CORE_WRITE_EXTRA_DATA
+	ELF_CORE_WRITE_EXTRA_DATA;
+#endif
+
+	if (file->f_pos != offset) {
+		/* Sanity check */
+		printk(KERN_WARNING
+		       "elf_core_dump: file->f_pos (%lld) != offset (%lld)\n",
+		       file->f_pos, offset);
+	}
+
+end_coredump:
+	set_fs(fs);
+
+cleanup:
+	while (!list_empty(&thread_list)) {
+		struct list_head *tmp = thread_list.next;
+		list_del(tmp);
+		kfree(list_entry(tmp, struct elf_thread_status, list));
+	}
+
+	kfree(elf);
+	kfree(prstatus);
+	kfree(psinfo);
+	kfree(notes);
+	kfree(fpu);
+#ifdef ELF_CORE_COPY_XFPREGS
+	kfree(xfpu);
+#endif
+	return has_dumped;
+#undef NUM_NOTES
+}
+
+#endif		/* USE_ELF_CORE_DUMP */
diff -urN linux-2.6.18-rc1/fs/char_dev.c linux-2.6.18-rc2/fs/char_dev.c
--- linux-2.6.18-rc1/fs/char_dev.c	2006-07-15 22:34:43.253070833 +0000
+++ linux-2.6.18-rc2/fs/char_dev.c	2006-07-15 22:34:48.549645767 +0000
@@ -182,6 +182,28 @@
 	return 0;
 }
 
+/**
+ * register_chrdev() - Register a major number for character devices.
+ * @major: major device number or 0 for dynamic allocation
+ * @name: name of this range of devices
+ * @fops: file operations associated with this devices
+ *
+ * If @major == 0 this functions will dynamically allocate a major and return
+ * its number.
+ *
+ * If @major > 0 this function will attempt to reserve a device with the given
+ * major number and will return zero on success.
+ *
+ * Returns a -ve errno on failure.
+ *
+ * The name of this device has nothing to do with the name of the device in
+ * /dev. It only helps to keep track of the different owners of devices. If
+ * your module name has only one type of devices it's ok to use e.g. the name
+ * of the module here.
+ *
+ * This function registers a range of 256 minor numbers. The first minor number
+ * is 0.
+ */
 int register_chrdev(unsigned int major, const char *name,
 		    const struct file_operations *fops)
 {
diff -urN linux-2.6.18-rc1/fs/ext3/acl.h linux-2.6.18-rc2/fs/ext3/acl.h
--- linux-2.6.18-rc1/fs/ext3/acl.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/fs/ext3/acl.h	2006-07-15 22:34:48.581649241 +0000
@@ -62,9 +62,6 @@
 extern int ext3_acl_chmod (struct inode *);
 extern int ext3_init_acl (handle_t *, struct inode *, struct inode *);
 
-extern int init_ext3_acl(void);
-extern void exit_ext3_acl(void);
-
 #else  /* CONFIG_EXT3_FS_POSIX_ACL */
 #include <linux/sched.h>
 #define ext3_permission NULL
diff -urN linux-2.6.18-rc1/fs/file.c linux-2.6.18-rc2/fs/file.c
--- linux-2.6.18-rc1/fs/file.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/fs/file.c	2006-07-15 22:34:48.585649675 +0000
@@ -240,13 +240,9 @@
 	if (!fdt)
   		goto out;
 
-	nfds = 8 * L1_CACHE_BYTES;
-  	/* Expand to the max in easy steps */
-  	while (nfds <= nr) {
-		nfds = nfds * 2;
-		if (nfds > NR_OPEN)
-			nfds = NR_OPEN;
-	}
+	nfds = max_t(int, 8 * L1_CACHE_BYTES, roundup_pow_of_two(nr + 1));
+	if (nfds > NR_OPEN)
+		nfds = NR_OPEN;
 
   	new_openset = alloc_fdset(nfds);
   	new_execset = alloc_fdset(nfds);
@@ -277,11 +273,13 @@
 	} while (nfds <= nr);
 	new_fds = alloc_fd_array(nfds);
 	if (!new_fds)
-		goto out;
+		goto out2;
 	fdt->fd = new_fds;
 	fdt->max_fds = nfds;
 	fdt->free_files = NULL;
 	return fdt;
+out2:
+	nfds = fdt->max_fdset;
 out:
   	if (new_openset)
   		free_fdset(new_openset, nfds);
diff -urN linux-2.6.18-rc1/fs/hugetlbfs/inode.c linux-2.6.18-rc2/fs/hugetlbfs/inode.c
--- linux-2.6.18-rc1/fs/hugetlbfs/inode.c	2006-07-15 22:34:43.301076044 +0000
+++ linux-2.6.18-rc2/fs/hugetlbfs/inode.c	2006-07-15 22:34:48.597650978 +0000
@@ -83,8 +83,6 @@
 
 	ret = -ENOMEM;
 	len = vma_len + ((loff_t)vma->vm_pgoff << PAGE_SHIFT);
-	if (!(vma->vm_flags & VM_WRITE) && len > inode->i_size)
-		goto out;
 
 	if (vma->vm_flags & VM_MAYSHARE &&
 	    hugetlb_reserve_pages(inode, vma->vm_pgoff >> (HPAGE_SHIFT-PAGE_SHIFT),
@@ -93,7 +91,7 @@
 
 	ret = 0;
 	hugetlb_prefault_arch_hook(vma->vm_mm);
-	if (inode->i_size < len)
+	if (vma->vm_flags & VM_WRITE && inode->i_size < len)
 		inode->i_size = len;
 out:
 	mutex_unlock(&inode->i_mutex);
diff -urN linux-2.6.18-rc1/fs/jfs/jfs_txnmgr.c linux-2.6.18-rc2/fs/jfs/jfs_txnmgr.c
--- linux-2.6.18-rc1/fs/jfs/jfs_txnmgr.c	2006-07-15 22:34:43.325078650 +0000
+++ linux-2.6.18-rc2/fs/jfs/jfs_txnmgr.c	2006-07-15 22:34:48.625654017 +0000
@@ -2944,7 +2944,7 @@
 				 * Inode is being freed
 				 */
 				list_del_init(&jfs_ip->anon_inode_list);
-			} else if (! !mutex_trylock(&jfs_ip->commit_mutex)) {
+			} else if (mutex_trylock(&jfs_ip->commit_mutex)) {
 				/*
 				 * inode will be removed from anonymous list
 				 * when it is committed
diff -urN linux-2.6.18-rc1/fs/jfs/namei.c linux-2.6.18-rc2/fs/jfs/namei.c
--- linux-2.6.18-rc1/fs/jfs/namei.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/fs/jfs/namei.c	2006-07-15 22:34:48.625654017 +0000
@@ -165,8 +165,8 @@
 
       out3:
 	txEnd(tid);
-	mutex_unlock(&JFS_IP(dip)->commit_mutex);
 	mutex_unlock(&JFS_IP(ip)->commit_mutex);
+	mutex_unlock(&JFS_IP(dip)->commit_mutex);
 	if (rc) {
 		free_ea_wmap(ip);
 		ip->i_nlink = 0;
@@ -300,8 +300,8 @@
 
       out3:
 	txEnd(tid);
-	mutex_unlock(&JFS_IP(dip)->commit_mutex);
 	mutex_unlock(&JFS_IP(ip)->commit_mutex);
+	mutex_unlock(&JFS_IP(dip)->commit_mutex);
 	if (rc) {
 		free_ea_wmap(ip);
 		ip->i_nlink = 0;
@@ -384,8 +384,8 @@
 		if (rc == -EIO)
 			txAbort(tid, 1);
 		txEnd(tid);
-		mutex_unlock(&JFS_IP(dip)->commit_mutex);
 		mutex_unlock(&JFS_IP(ip)->commit_mutex);
+		mutex_unlock(&JFS_IP(dip)->commit_mutex);
 
 		goto out2;
 	}
@@ -422,8 +422,8 @@
 
 	txEnd(tid);
 
-	mutex_unlock(&JFS_IP(dip)->commit_mutex);
 	mutex_unlock(&JFS_IP(ip)->commit_mutex);
+	mutex_unlock(&JFS_IP(dip)->commit_mutex);
 
 	/*
 	 * Truncating the directory index table is not guaranteed.  It
@@ -503,8 +503,8 @@
 		if (rc == -EIO)
 			txAbort(tid, 1);	/* Marks FS Dirty */
 		txEnd(tid);
-		mutex_unlock(&JFS_IP(dip)->commit_mutex);
 		mutex_unlock(&JFS_IP(ip)->commit_mutex);
+		mutex_unlock(&JFS_IP(dip)->commit_mutex);
 		IWRITE_UNLOCK(ip);
 		goto out1;
 	}
@@ -527,8 +527,8 @@
 		if ((new_size = commitZeroLink(tid, ip)) < 0) {
 			txAbort(tid, 1);	/* Marks FS Dirty */
 			txEnd(tid);
-			mutex_unlock(&JFS_IP(dip)->commit_mutex);
 			mutex_unlock(&JFS_IP(ip)->commit_mutex);
+			mutex_unlock(&JFS_IP(dip)->commit_mutex);
 			IWRITE_UNLOCK(ip);
 			rc = new_size;
 			goto out1;
@@ -556,9 +556,8 @@
 
 	txEnd(tid);
 
-	mutex_unlock(&JFS_IP(dip)->commit_mutex);
 	mutex_unlock(&JFS_IP(ip)->commit_mutex);
-
+	mutex_unlock(&JFS_IP(dip)->commit_mutex);
 
 	while (new_size && (rc == 0)) {
 		tid = txBegin(dip->i_sb, 0);
@@ -847,8 +846,8 @@
       out:
 	txEnd(tid);
 
-	mutex_unlock(&JFS_IP(dir)->commit_mutex);
 	mutex_unlock(&JFS_IP(ip)->commit_mutex);
+	mutex_unlock(&JFS_IP(dir)->commit_mutex);
 
 	jfs_info("jfs_link: rc:%d", rc);
 	return rc;
@@ -1037,8 +1036,8 @@
 
       out3:
 	txEnd(tid);
-	mutex_unlock(&JFS_IP(dip)->commit_mutex);
 	mutex_unlock(&JFS_IP(ip)->commit_mutex);
+	mutex_unlock(&JFS_IP(dip)->commit_mutex);
 	if (rc) {
 		free_ea_wmap(ip);
 		ip->i_nlink = 0;
@@ -1160,10 +1159,11 @@
 		if (S_ISDIR(new_ip->i_mode)) {
 			new_ip->i_nlink--;
 			if (new_ip->i_nlink) {
-				mutex_unlock(&JFS_IP(new_dir)->commit_mutex);
-				mutex_unlock(&JFS_IP(old_ip)->commit_mutex);
+				mutex_unlock(&JFS_IP(new_ip)->commit_mutex);
 				if (old_dir != new_dir)
 					mutex_unlock(&JFS_IP(old_dir)->commit_mutex);
+				mutex_unlock(&JFS_IP(old_ip)->commit_mutex);
+				mutex_unlock(&JFS_IP(new_dir)->commit_mutex);
 				if (!S_ISDIR(old_ip->i_mode) && new_ip)
 					IWRITE_UNLOCK(new_ip);
 				jfs_error(new_ip->i_sb,
@@ -1281,13 +1281,12 @@
 
       out4:
 	txEnd(tid);
-
-	mutex_unlock(&JFS_IP(new_dir)->commit_mutex);
-	mutex_unlock(&JFS_IP(old_ip)->commit_mutex);
-	if (old_dir != new_dir)
-		mutex_unlock(&JFS_IP(old_dir)->commit_mutex);
 	if (new_ip)
 		mutex_unlock(&JFS_IP(new_ip)->commit_mutex);
+	if (old_dir != new_dir)
+		mutex_unlock(&JFS_IP(old_dir)->commit_mutex);
+	mutex_unlock(&JFS_IP(old_ip)->commit_mutex);
+	mutex_unlock(&JFS_IP(new_dir)->commit_mutex);
 
 	while (new_size && (rc == 0)) {
 		tid = txBegin(new_ip->i_sb, 0);
diff -urN linux-2.6.18-rc1/fs/namei.c linux-2.6.18-rc2/fs/namei.c
--- linux-2.6.18-rc1/fs/namei.c	2006-07-15 22:34:43.329079084 +0000
+++ linux-2.6.18-rc2/fs/namei.c	2006-07-15 22:34:48.629654452 +0000
@@ -1712,8 +1712,14 @@
 	if (error)
 		goto exit_dput;
 	error = __do_follow_link(&path, nd);
-	if (error)
+	if (error) {
+		/* Does someone understand code flow here? Or it is only
+		 * me so stupid? Anathema to whoever designed this non-sense
+		 * with "intent.open".
+		 */
+		release_open_intent(nd);
 		return error;
+	}
 	nd->flags &= ~LOOKUP_PARENT;
 	if (nd->last_type == LAST_BIND)
 		goto ok;
diff -urN linux-2.6.18-rc1/fs/nfsd/nfs4proc.c linux-2.6.18-rc2/fs/nfsd/nfs4proc.c
--- linux-2.6.18-rc1/fs/nfsd/nfs4proc.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/fs/nfsd/nfs4proc.c	2006-07-15 22:34:48.649656623 +0000
@@ -721,6 +721,12 @@
 	return nfs_ok;
 }
 
+static inline void nfsd4_increment_op_stats(u32 opnum)
+{
+	if (opnum >= FIRST_NFS4_OP && opnum <= LAST_NFS4_OP)
+		nfsdstats.nfs4_opcount[opnum]++;
+}
+
 
 /*
  * COMPOUND call.
@@ -930,6 +936,8 @@
 		/* XXX Ugh, we need to get rid of this kind of special case: */
 		if (op->opnum == OP_READ && op->u.read.rd_filp)
 			fput(op->u.read.rd_filp);
+
+		nfsd4_increment_op_stats(op->opnum);
 	}
 
 out:
diff -urN linux-2.6.18-rc1/fs/nfsd/stats.c linux-2.6.18-rc2/fs/nfsd/stats.c
--- linux-2.6.18-rc1/fs/nfsd/stats.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/fs/nfsd/stats.c	2006-07-15 22:34:48.653657057 +0000
@@ -72,6 +72,16 @@
 	/* show my rpc info */
 	svc_seq_show(seq, &nfsd_svcstats);
 
+#ifdef CONFIG_NFSD_V4
+	/* Show count for individual nfsv4 operations */
+	/* Writing operation numbers 0 1 2 also for maintaining uniformity */
+	seq_printf(seq,"proc4ops %u", LAST_NFS4_OP + 1);
+	for (i = 0; i <= LAST_NFS4_OP; i++)
+		seq_printf(seq, " %u", nfsdstats.nfs4_opcount[i]);
+
+	seq_putc(seq, '\n');
+#endif
+
 	return 0;
 }
 
diff -urN linux-2.6.18-rc1/fs/partitions/check.c linux-2.6.18-rc2/fs/partitions/check.c
--- linux-2.6.18-rc1/fs/partitions/check.c	2006-07-15 22:34:43.373083860 +0000
+++ linux-2.6.18-rc2/fs/partitions/check.c	2006-07-15 22:34:48.673659228 +0000
@@ -339,6 +339,7 @@
 	p->start_sect = start;
 	p->nr_sects = len;
 	p->partno = part;
+	p->policy = disk->policy;
 
 	if (isdigit(disk->kobj.name[strlen(disk->kobj.name)-1]))
 		snprintf(p->kobj.name,KOBJ_NAME_LEN,"%sp%d",disk->kobj.name,part);
diff -urN linux-2.6.18-rc1/fs/proc/array.c linux-2.6.18-rc2/fs/proc/array.c
--- linux-2.6.18-rc1/fs/proc/array.c	2006-07-15 22:34:43.377084295 +0000
+++ linux-2.6.18-rc2/fs/proc/array.c	2006-07-15 22:34:48.677659662 +0000
@@ -74,6 +74,7 @@
 #include <linux/times.h>
 #include <linux/cpuset.h>
 #include <linux/rcupdate.h>
+#include <linux/delayacct.h>
 
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -411,7 +412,7 @@
 
 	res = sprintf(buffer,"%d (%s) %c %d %d %d %d %d %lu %lu \
 %lu %lu %lu %lu %lu %ld %ld %ld %ld %d 0 %llu %lu %ld %lu %lu %lu %lu %lu \
-%lu %lu %lu %lu %lu %lu %lu %lu %d %d %lu %lu\n",
+%lu %lu %lu %lu %lu %lu %lu %lu %d %d %lu %lu %llu\n",
 		task->pid,
 		tcomm,
 		state,
@@ -455,7 +456,8 @@
 		task->exit_signal,
 		task_cpu(task),
 		task->rt_priority,
-		task->policy);
+		task->policy,
+		(unsigned long long)delayacct_blkio_ticks(task));
 	if(mm)
 		mmput(mm);
 	return res;
diff -urN linux-2.6.18-rc1/fs/proc/base.c linux-2.6.18-rc2/fs/proc/base.c
--- linux-2.6.18-rc1/fs/proc/base.c	2006-07-15 22:34:43.377084295 +0000
+++ linux-2.6.18-rc2/fs/proc/base.c	2006-07-15 22:34:48.677659662 +0000
@@ -551,6 +551,27 @@
 	return allowed;
 }
 
+static int proc_setattr(struct dentry *dentry, struct iattr *attr)
+{
+	int error;
+	struct inode *inode = dentry->d_inode;
+
+	if (attr->ia_valid & ATTR_MODE)
+		return -EPERM;
+
+	error = inode_change_ok(inode, attr);
+	if (!error) {
+		error = security_inode_setattr(dentry, attr);
+		if (!error)
+			error = inode_setattr(inode, attr);
+	}
+	return error;
+}
+
+static struct inode_operations proc_def_inode_operations = {
+	.setattr	= proc_setattr,
+};
+
 extern struct seq_operations mounts_op;
 struct proc_mounts {
 	struct seq_file m;
@@ -1111,7 +1132,8 @@
 
 static struct inode_operations proc_pid_link_inode_operations = {
 	.readlink	= proc_pid_readlink,
-	.follow_link	= proc_pid_follow_link
+	.follow_link	= proc_pid_follow_link,
+	.setattr	= proc_setattr,
 };
 
 static int proc_readfd(struct file * filp, void * dirent, filldir_t filldir)
@@ -1285,6 +1307,7 @@
 	ei = PROC_I(inode);
 	inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
 	inode->i_ino = fake_ino(task->pid, ino);
+	inode->i_op = &proc_def_inode_operations;
 
 	/*
 	 * grab the reference to task.
@@ -1339,6 +1362,7 @@
 			inode->i_uid = 0;
 			inode->i_gid = 0;
 		}
+		inode->i_mode &= ~(S_ISUID | S_ISGID);
 		security_task_to_inode(task, inode);
 		put_task_struct(task);
 		return 1;
@@ -1389,6 +1413,7 @@
 					inode->i_uid = 0;
 					inode->i_gid = 0;
 				}
+				inode->i_mode &= ~(S_ISUID | S_ISGID);
 				security_task_to_inode(task, inode);
 				put_task_struct(task);
 				return 1;
@@ -1527,11 +1552,13 @@
  */
 static struct inode_operations proc_fd_inode_operations = {
 	.lookup		= proc_lookupfd,
+	.setattr	= proc_setattr,
 };
 
 static struct inode_operations proc_task_inode_operations = {
 	.lookup		= proc_task_lookup,
 	.getattr	= proc_task_getattr,
+	.setattr	= proc_setattr,
 };
 
 #ifdef CONFIG_SECURITY
@@ -1845,11 +1872,13 @@
 static struct inode_operations proc_tgid_base_inode_operations = {
 	.lookup		= proc_tgid_base_lookup,
 	.getattr	= pid_getattr,
+	.setattr	= proc_setattr,
 };
 
 static struct inode_operations proc_tid_base_inode_operations = {
 	.lookup		= proc_tid_base_lookup,
 	.getattr	= pid_getattr,
+	.setattr	= proc_setattr,
 };
 
 #ifdef CONFIG_SECURITY
@@ -1892,11 +1921,13 @@
 static struct inode_operations proc_tgid_attr_inode_operations = {
 	.lookup		= proc_tgid_attr_lookup,
 	.getattr	= pid_getattr,
+	.setattr	= proc_setattr,
 };
 
 static struct inode_operations proc_tid_attr_inode_operations = {
 	.lookup		= proc_tid_attr_lookup,
 	.getattr	= pid_getattr,
+	.setattr	= proc_setattr,
 };
 #endif
 
diff -urN linux-2.6.18-rc1/fs/proc/inode.c linux-2.6.18-rc2/fs/proc/inode.c
--- linux-2.6.18-rc1/fs/proc/inode.c	2006-07-15 22:34:43.377084295 +0000
+++ linux-2.6.18-rc2/fs/proc/inode.c	2006-07-15 22:34:48.677659662 +0000
@@ -192,7 +192,7 @@
 {
 	struct inode * root_inode;
 
-	s->s_flags |= MS_NODIRATIME;
+	s->s_flags |= MS_NODIRATIME | MS_NOSUID | MS_NOEXEC;
 	s->s_blocksize = 1024;
 	s->s_blocksize_bits = 10;
 	s->s_magic = PROC_SUPER_MAGIC;
diff -urN linux-2.6.18-rc1/fs/proc/kcore.c linux-2.6.18-rc2/fs/proc/kcore.c
--- linux-2.6.18-rc1/fs/proc/kcore.c	2006-07-15 22:34:43.377084295 +0000
+++ linux-2.6.18-rc2/fs/proc/kcore.c	2006-07-15 22:34:48.677659662 +0000
@@ -42,8 +42,6 @@
 #define	kc_offset_to_vaddr(o) ((o) + PAGE_OFFSET)
 #endif
 
-#define roundup(x, y)  ((((x)+((y)-1))/(y))*(y))
-
 /* An ELF note in memory */
 struct memelfnote
 {
@@ -384,7 +382,7 @@
 				 */
 				if (n) { 
 					if (clear_user(buffer + tsz - n,
-								tsz - n))
+								n))
 						return -EFAULT;
 				}
 			} else {
diff -urN linux-2.6.18-rc1/fs/ramfs/file-nommu.c linux-2.6.18-rc2/fs/ramfs/file-nommu.c
--- linux-2.6.18-rc1/fs/ramfs/file-nommu.c	2006-07-15 22:34:43.381084729 +0000
+++ linux-2.6.18-rc2/fs/ramfs/file-nommu.c	2006-07-15 22:34:48.681660097 +0000
@@ -283,9 +283,9 @@
 
 /*****************************************************************************/
 /*
- * set up a mapping
+ * set up a mapping for shared memory segments
  */
 int ramfs_nommu_mmap(struct file *file, struct vm_area_struct *vma)
 {
-	return 0;
+	return vma->vm_flags & VM_SHARED ? 0 : -ENOSYS;
 }
diff -urN linux-2.6.18-rc1/fs/read_write.c linux-2.6.18-rc2/fs/read_write.c
--- linux-2.6.18-rc1/fs/read_write.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/fs/read_write.c	2006-07-15 22:34:48.681660097 +0000
@@ -436,7 +436,7 @@
 	return seg;
 }
 
-EXPORT_SYMBOL(iov_shorten);
+EXPORT_UNUSED_SYMBOL(iov_shorten);  /*  June 2006  */
 
 /* A write operation does a read from user space and vice versa */
 #define vrfy_dir(type) ((type) == READ ? VERIFY_WRITE : VERIFY_READ)
diff -urN linux-2.6.18-rc1/fs/reiserfs/file.c linux-2.6.18-rc2/fs/reiserfs/file.c
--- linux-2.6.18-rc1/fs/reiserfs/file.c	2006-07-15 22:34:43.385085163 +0000
+++ linux-2.6.18-rc2/fs/reiserfs/file.c	2006-07-15 22:34:48.685660531 +0000
@@ -860,8 +860,12 @@
 			// this sets the proper flags for O_SYNC to trigger a commit
 			mark_inode_dirty(inode);
 			reiserfs_write_unlock(inode->i_sb);
-		} else
+		} else {
+			reiserfs_write_lock(inode->i_sb);
+			reiserfs_update_inode_transaction(inode);
 			mark_inode_dirty(inode);
+			reiserfs_write_unlock(inode->i_sb);
+		}
 
 		sd_update = 1;
 	}
diff -urN linux-2.6.18-rc1/fs/reiserfs/procfs.c linux-2.6.18-rc2/fs/reiserfs/procfs.c
--- linux-2.6.18-rc1/fs/reiserfs/procfs.c	2006-07-15 22:34:43.389085597 +0000
+++ linux-2.6.18-rc2/fs/reiserfs/procfs.c	2006-07-15 22:34:48.689660965 +0000
@@ -492,9 +492,17 @@
 
 int reiserfs_proc_info_init(struct super_block *sb)
 {
+	char b[BDEVNAME_SIZE];
+	char *s;
+
+	/* Some block devices use /'s */
+	strlcpy(b, reiserfs_bdevname(sb), BDEVNAME_SIZE);
+	s = strchr(b, '/');
+	if (s)
+		*s = '!';
+
 	spin_lock_init(&__PINFO(sb).lock);
-	REISERFS_SB(sb)->procdir =
-	    proc_mkdir(reiserfs_bdevname(sb), proc_info_root);
+	REISERFS_SB(sb)->procdir = proc_mkdir(b, proc_info_root);
 	if (REISERFS_SB(sb)->procdir) {
 		REISERFS_SB(sb)->procdir->owner = THIS_MODULE;
 		REISERFS_SB(sb)->procdir->data = sb;
@@ -508,13 +516,22 @@
 		return 0;
 	}
 	reiserfs_warning(sb, "reiserfs: cannot create /proc/%s/%s",
-			 proc_info_root_name, reiserfs_bdevname(sb));
+			 proc_info_root_name, b);
 	return 1;
 }
 
 int reiserfs_proc_info_done(struct super_block *sb)
 {
 	struct proc_dir_entry *de = REISERFS_SB(sb)->procdir;
+	char b[BDEVNAME_SIZE];
+	char *s;
+
+	/* Some block devices use /'s */
+	strlcpy(b, reiserfs_bdevname(sb), BDEVNAME_SIZE);
+	s = strchr(b, '/');
+	if (s)
+		*s = '!';
+
 	if (de) {
 		remove_proc_entry("journal", de);
 		remove_proc_entry("oidmap", de);
@@ -528,7 +545,7 @@
 	__PINFO(sb).exiting = 1;
 	spin_unlock(&__PINFO(sb).lock);
 	if (proc_info_root) {
-		remove_proc_entry(reiserfs_bdevname(sb), proc_info_root);
+		remove_proc_entry(b, proc_info_root);
 		REISERFS_SB(sb)->procdir = NULL;
 	}
 	return 0;
diff -urN linux-2.6.18-rc1/fs/splice.c linux-2.6.18-rc2/fs/splice.c
--- linux-2.6.18-rc1/fs/splice.c	2006-07-15 22:34:43.393086032 +0000
+++ linux-2.6.18-rc2/fs/splice.c	2006-07-15 22:34:48.697661834 +0000
@@ -1307,6 +1307,85 @@
 }
 
 /*
+ * Make sure there's data to read. Wait for input if we can, otherwise
+ * return an appropriate error.
+ */
+static int link_ipipe_prep(struct pipe_inode_info *pipe, unsigned int flags)
+{
+	int ret;
+
+	/*
+	 * Check ->nrbufs without the inode lock first. This function
+	 * is speculative anyways, so missing one is ok.
+	 */
+	if (pipe->nrbufs)
+		return 0;
+
+	ret = 0;
+	mutex_lock(&pipe->inode->i_mutex);
+
+	while (!pipe->nrbufs) {
+		if (signal_pending(current)) {
+			ret = -ERESTARTSYS;
+			break;
+		}
+		if (!pipe->writers)
+			break;
+		if (!pipe->waiting_writers) {
+			if (flags & SPLICE_F_NONBLOCK) {
+				ret = -EAGAIN;
+				break;
+			}
+		}
+		pipe_wait(pipe);
+	}
+
+	mutex_unlock(&pipe->inode->i_mutex);
+	return ret;
+}
+
+/*
+ * Make sure there's writeable room. Wait for room if we can, otherwise
+ * return an appropriate error.
+ */
+static int link_opipe_prep(struct pipe_inode_info *pipe, unsigned int flags)
+{
+	int ret;
+
+	/*
+	 * Check ->nrbufs without the inode lock first. This function
+	 * is speculative anyways, so missing one is ok.
+	 */
+	if (pipe->nrbufs < PIPE_BUFFERS)
+		return 0;
+
+	ret = 0;
+	mutex_lock(&pipe->inode->i_mutex);
+
+	while (pipe->nrbufs >= PIPE_BUFFERS) {
+		if (!pipe->readers) {
+			send_sig(SIGPIPE, current, 0);
+			ret = -EPIPE;
+			break;
+		}
+		if (flags & SPLICE_F_NONBLOCK) {
+			ret = -EAGAIN;
+			break;
+		}
+		if (signal_pending(current)) {
+			ret = -ERESTARTSYS;
+			break;
+		}
+		pipe->waiting_writers++;
+		pipe_wait(pipe);
+		pipe->waiting_writers--;
+	}
+
+	mutex_unlock(&pipe->inode->i_mutex);
+	return ret;
+}
+
+/*
  * Link contents of ipipe to opipe.
  */
 static int link_pipe(struct pipe_inode_info *ipipe,
@@ -1314,9 +1393,7 @@
 		     size_t len, unsigned int flags)
 {
 	struct pipe_buffer *ibuf, *obuf;
-	int ret, do_wakeup, i, ipipe_first;
-
-	ret = do_wakeup = ipipe_first = 0;
+	int ret = 0, i = 0, nbuf;
 
 	/*
 	 * Potential ABBA deadlock, work around it by ordering lock
@@ -1324,126 +1401,62 @@
 	 * could deadlock (one doing tee from A -> B, the other from B -> A).
 	 */
 	if (ipipe->inode < opipe->inode) {
-		ipipe_first = 1;
-		mutex_lock(&ipipe->inode->i_mutex);
-		mutex_lock(&opipe->inode->i_mutex);
+		mutex_lock_nested(&ipipe->inode->i_mutex, I_MUTEX_PARENT);
+		mutex_lock_nested(&opipe->inode->i_mutex, I_MUTEX_CHILD);
 	} else {
-		mutex_lock(&opipe->inode->i_mutex);
-		mutex_lock(&ipipe->inode->i_mutex);
+		mutex_lock_nested(&opipe->inode->i_mutex, I_MUTEX_PARENT);
+		mutex_lock_nested(&ipipe->inode->i_mutex, I_MUTEX_CHILD);
 	}
 
-	for (i = 0;; i++) {
+	do {
 		if (!opipe->readers) {
 			send_sig(SIGPIPE, current, 0);
 			if (!ret)
 				ret = -EPIPE;
 			break;
 		}
-		if (ipipe->nrbufs - i) {
-			ibuf = ipipe->bufs + ((ipipe->curbuf + i) & (PIPE_BUFFERS - 1));
 
-			/*
-			 * If we have room, fill this buffer
-			 */
-			if (opipe->nrbufs < PIPE_BUFFERS) {
-				int nbuf = (opipe->curbuf + opipe->nrbufs) & (PIPE_BUFFERS - 1);
-
-				/*
-				 * Get a reference to this pipe buffer,
-				 * so we can copy the contents over.
-				 */
-				ibuf->ops->get(ipipe, ibuf);
-
-				obuf = opipe->bufs + nbuf;
-				*obuf = *ibuf;
-
-				/*
-				 * Don't inherit the gift flag, we need to
-				 * prevent multiple steals of this page.
-				 */
-				obuf->flags &= ~PIPE_BUF_FLAG_GIFT;
-
-				if (obuf->len > len)
-					obuf->len = len;
-
-				opipe->nrbufs++;
-				do_wakeup = 1;
-				ret += obuf->len;
-				len -= obuf->len;
-
-				if (!len)
-					break;
-				if (opipe->nrbufs < PIPE_BUFFERS)
-					continue;
-			}
-
-			/*
-			 * We have input available, but no output room.
-			 * If we already copied data, return that. If we
-			 * need to drop the opipe lock, it must be ordered
-			 * last to avoid deadlocks.
-			 */
-			if ((flags & SPLICE_F_NONBLOCK) || !ipipe_first) {
-				if (!ret)
-					ret = -EAGAIN;
-				break;
-			}
-			if (signal_pending(current)) {
-				if (!ret)
-					ret = -ERESTARTSYS;
-				break;
-			}
-			if (do_wakeup) {
-				smp_mb();
-				if (waitqueue_active(&opipe->wait))
-					wake_up_interruptible(&opipe->wait);
-				kill_fasync(&opipe->fasync_readers, SIGIO, POLL_IN);
-				do_wakeup = 0;
-			}
+		/*
+		 * If we have iterated all input buffers or ran out of
+		 * output room, break.
+		 */
+		if (i >= ipipe->nrbufs || opipe->nrbufs >= PIPE_BUFFERS)
+			break;
 
-			opipe->waiting_writers++;
-			pipe_wait(opipe);
-			opipe->waiting_writers--;
-			continue;
-		}
+		ibuf = ipipe->bufs + ((ipipe->curbuf + i) & (PIPE_BUFFERS - 1));
+		nbuf = (opipe->curbuf + opipe->nrbufs) & (PIPE_BUFFERS - 1);
 
 		/*
-		 * No input buffers, do the usual checks for available
-		 * writers and blocking and wait if necessary
+		 * Get a reference to this pipe buffer,
+		 * so we can copy the contents over.
 		 */
-		if (!ipipe->writers)
-			break;
-		if (!ipipe->waiting_writers) {
-			if (ret)
-				break;
-		}
+		ibuf->ops->get(ipipe, ibuf);
+
+		obuf = opipe->bufs + nbuf;
+		*obuf = *ibuf;
+
 		/*
-		 * pipe_wait() drops the ipipe mutex. To avoid deadlocks
-		 * with another process, we can only safely do that if
-		 * the ipipe lock is ordered last.
+		 * Don't inherit the gift flag, we need to
+		 * prevent multiple steals of this page.
 		 */
-		if ((flags & SPLICE_F_NONBLOCK) || ipipe_first) {
-			if (!ret)
-				ret = -EAGAIN;
-			break;
-		}
-		if (signal_pending(current)) {
-			if (!ret)
-				ret = -ERESTARTSYS;
-			break;
-		}
+		obuf->flags &= ~PIPE_BUF_FLAG_GIFT;
 
-		if (waitqueue_active(&ipipe->wait))
-			wake_up_interruptible_sync(&ipipe->wait);
-		kill_fasync(&ipipe->fasync_writers, SIGIO, POLL_OUT);
+		if (obuf->len > len)
+			obuf->len = len;
 
-		pipe_wait(ipipe);
-	}
+		opipe->nrbufs++;
+		ret += obuf->len;
+		len -= obuf->len;
+		i++;
+	} while (len);
 
 	mutex_unlock(&ipipe->inode->i_mutex);
 	mutex_unlock(&opipe->inode->i_mutex);
 
-	if (do_wakeup) {
+	/*
+	 * If we put data in the output pipe, wakeup any potential readers.
+	 */
+	if (ret > 0) {
 		smp_mb();
 		if (waitqueue_active(&opipe->wait))
 			wake_up_interruptible(&opipe->wait);
@@ -1464,14 +1477,29 @@
 {
 	struct pipe_inode_info *ipipe = in->f_dentry->d_inode->i_pipe;
 	struct pipe_inode_info *opipe = out->f_dentry->d_inode->i_pipe;
+	int ret = -EINVAL;
 
 	/*
-	 * Link ipipe to the two output pipes, consuming as we go along.
+	 * Duplicate the contents of ipipe to opipe without actually
+	 * copying the data.
 	 */
-	if (ipipe && opipe)
-		return link_pipe(ipipe, opipe, len, flags);
+	if (ipipe && opipe && ipipe != opipe) {
+		/*
+		 * Keep going, unless we encounter an error. The ipipe/opipe
+		 * ordering doesn't really matter.
+		 */
+		ret = link_ipipe_prep(ipipe, flags);
+		if (!ret) {
+			ret = link_opipe_prep(opipe, flags);
+			if (!ret) {
+				ret = link_pipe(ipipe, opipe, len, flags);
+				if (!ret && (flags & SPLICE_F_NONBLOCK))
+					ret = -EAGAIN;
+			}
+		}
+	}
 
-	return -EINVAL;
+	return ret;
 }
 
 asmlinkage long sys_tee(int fdin, int fdout, size_t len, unsigned int flags)
diff -urN linux-2.6.18-rc1/fs/sysfs/inode.c linux-2.6.18-rc2/fs/sysfs/inode.c
--- linux-2.6.18-rc1/fs/sysfs/inode.c	2006-07-15 22:34:43.397086466 +0000
+++ linux-2.6.18-rc2/fs/sysfs/inode.c	2006-07-15 22:34:48.697661834 +0000
@@ -109,6 +109,17 @@
 	inode->i_ctime = iattr->ia_ctime;
 }
 
+
+/*
+ * sysfs has a different i_mutex lock order behavior for i_mutex than other
+ * filesystems; sysfs i_mutex is called in many places with subsystem locks
+ * held. At the same time, many of the VFS locking rules do not apply to
+ * sysfs at all (cross directory rename for example). To untangle this mess
+ * (which gives false positives in lockdep), we're giving sysfs inodes their
+ * own class for i_mutex.
+ */
+static struct lock_class_key sysfs_inode_imutex_key;
+
 struct inode * sysfs_new_inode(mode_t mode, struct sysfs_dirent * sd)
 {
 	struct inode * inode = new_inode(sysfs_sb);
@@ -118,6 +129,7 @@
 		inode->i_mapping->a_ops = &sysfs_aops;
 		inode->i_mapping->backing_dev_info = &sysfs_backing_dev_info;
 		inode->i_op = &sysfs_inode_operations;
+		lockdep_set_class(&inode->i_mutex, &sysfs_inode_imutex_key);
 
 		if (sd->s_iattr) {
 			/* sysfs_dirent has non-default attributes
diff -urN linux-2.6.18-rc1/fs/xfs/linux-2.6/xfs_linux.h linux-2.6.18-rc2/fs/xfs/linux-2.6/xfs_linux.h
--- linux-2.6.18-rc1/fs/xfs/linux-2.6/xfs_linux.h	2006-07-15 22:34:43.413088203 +0000
+++ linux-2.6.18-rc2/fs/xfs/linux-2.6/xfs_linux.h	2006-07-15 22:34:48.713663571 +0000
@@ -215,7 +215,6 @@
 #define MIN(a,b)	(min(a,b))
 #define MAX(a,b)	(max(a,b))
 #define howmany(x, y)	(((x)+((y)-1))/(y))
-#define roundup(x, y)	((((x)+((y)-1))/(y))*(y))
 
 /*
  * Various platform dependent calls that don't fit anywhere else
diff -urN linux-2.6.18-rc1/include/acpi/acconfig.h linux-2.6.18-rc2/include/acpi/acconfig.h
--- linux-2.6.18-rc1/include/acpi/acconfig.h	2006-07-15 22:34:43.461093414 +0000
+++ linux-2.6.18-rc2/include/acpi/acconfig.h	2006-07-15 22:34:48.761668781 +0000
@@ -63,7 +63,7 @@
 
 /* Current ACPICA subsystem version in YYYYMMDD format */
 
-#define ACPI_CA_VERSION                 0x20060623
+#define ACPI_CA_VERSION                 0x20060707
 
 /*
  * OS name, used for the _OS object.  The _OS object is essentially obsolete,
diff -urN linux-2.6.18-rc1/include/acpi/acinterp.h linux-2.6.18-rc2/include/acpi/acinterp.h
--- linux-2.6.18-rc1/include/acpi/acinterp.h	2006-07-15 22:34:43.461093414 +0000
+++ linux-2.6.18-rc2/include/acpi/acinterp.h	2006-07-15 22:34:48.765669216 +0000
@@ -53,10 +53,14 @@
 #define ACPI_EXD_TABLE_SIZE(name)   (sizeof(name) / sizeof (struct acpi_exdump_info))
 
 /*
- * If possible, pack the following structure to byte alignment, since we
- * don't care about performance for debug output
+ * If possible, pack the following structures to byte alignment, since we
+ * don't care about performance for debug output. Two cases where we cannot
+ * pack the structures:
+ *
+ * 1) Hardware does not support misaligned memory transfers
+ * 2) Compiler does not support pointers within packed structures
  */
-#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
+#if (!defined(ACPI_MISALIGNMENT_NOT_SUPPORTED) && !defined(ACPI_PACKED_POINTERS_NOT_SUPPORTED))
 #pragma pack(1)
 #endif
 
diff -urN linux-2.6.18-rc1/include/acpi/aclocal.h linux-2.6.18-rc2/include/acpi/aclocal.h
--- linux-2.6.18-rc1/include/acpi/aclocal.h	2006-07-15 22:34:43.465093848 +0000
+++ linux-2.6.18-rc2/include/acpi/aclocal.h	2006-07-15 22:34:48.765669216 +0000
@@ -127,7 +127,7 @@
 
 /* This Thread ID means that the mutex is not in use (unlocked) */
 
-#define ACPI_MUTEX_NOT_ACQUIRED         (u32) -1
+#define ACPI_MUTEX_NOT_ACQUIRED         (acpi_thread_id) 0
 
 /* Table for the global mutexes */
 
@@ -204,7 +204,7 @@
 /* Namespace Node flags */
 
 #define ANOBJ_END_OF_PEER_LIST          0x01	/* End-of-list, Peer field points to parent */
-#define ANOBJ_DATA_WIDTH_32             0x02	/* Parent table uses 32-bit math */
+#define ANOBJ_RESERVED                  0x02	/* Available for future use */
 #define ANOBJ_METHOD_ARG                0x04	/* Node is a method argument */
 #define ANOBJ_METHOD_LOCAL              0x08	/* Node is a method local */
 #define ANOBJ_SUBTREE_HAS_INI           0x10	/* Used to optimize device initialization */
diff -urN linux-2.6.18-rc1/include/acpi/acmacros.h linux-2.6.18-rc2/include/acpi/acmacros.h
--- linux-2.6.18-rc1/include/acpi/acmacros.h	2006-07-15 22:34:43.465093848 +0000
+++ linux-2.6.18-rc2/include/acpi/acmacros.h	2006-07-15 22:34:48.765669216 +0000
@@ -724,9 +724,15 @@
 
 /* Memory allocation */
 
+#ifndef ACPI_ALLOCATE
 #define ACPI_ALLOCATE(a)            acpi_ut_allocate((acpi_size)(a),_COMPONENT,_acpi_module_name,__LINE__)
+#endif
+#ifndef ACPI_ALLOCATE_ZEROED
 #define ACPI_ALLOCATE_ZEROED(a)     acpi_ut_allocate_zeroed((acpi_size)(a), _COMPONENT,_acpi_module_name,__LINE__)
-#define ACPI_FREE(a)                kfree(a)
+#endif
+#ifndef ACPI_FREE
+#define ACPI_FREE(a)                acpio_os_free(a)
+#endif
 #define ACPI_MEM_TRACKING(a)
 
 #else
diff -urN linux-2.6.18-rc1/include/acpi/acresrc.h linux-2.6.18-rc2/include/acpi/acresrc.h
--- linux-2.6.18-rc1/include/acpi/acresrc.h	2006-07-15 22:34:43.465093848 +0000
+++ linux-2.6.18-rc2/include/acpi/acresrc.h	2006-07-15 22:34:48.769669650 +0000
@@ -50,9 +50,13 @@
 
 /*
  * If possible, pack the following structures to byte alignment, since we
- * don't care about performance for debug output
+ * don't care about performance for debug output. Two cases where we cannot
+ * pack the structures:
+ *
+ * 1) Hardware does not support misaligned memory transfers
+ * 2) Compiler does not support pointers within packed structures
  */
-#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
+#if (!defined(ACPI_MISALIGNMENT_NOT_SUPPORTED) && !defined(ACPI_PACKED_POINTERS_NOT_SUPPORTED))
 #pragma pack(1)
 #endif
 
diff -urN linux-2.6.18-rc1/include/acpi/platform/aclinux.h linux-2.6.18-rc2/include/acpi/platform/aclinux.h
--- linux-2.6.18-rc1/include/acpi/platform/aclinux.h	2006-07-15 22:34:43.473094716 +0000
+++ linux-2.6.18-rc2/include/acpi/platform/aclinux.h	2006-07-15 22:34:48.773670084 +0000
@@ -59,6 +59,7 @@
 #include <asm/acpi.h>
 #include <linux/slab.h>
 #include <linux/spinlock_types.h>
+#include <asm/current.h>
 
 /* Host-dependent types and defines */
 
@@ -100,8 +101,30 @@
 
 #define acpi_cpu_flags unsigned long
 
-#define acpi_thread_id u32
+#define acpi_thread_id struct task_struct *
 
-static inline acpi_thread_id acpi_os_get_thread_id(void) { return 0; }
+static inline acpi_thread_id acpi_os_get_thread_id(void) { return current; }
+
+/*
+ * The irqs_disabled() check is for resume from RAM.
+ * Interrupts are off during resume, just like they are for boot.
+ * However, boot has  (system_state != SYSTEM_RUNNING)
+ * to quiet __might_sleep() in kmalloc() and resume does not.
+ */
+#include <acpi/actypes.h>
+static inline void *acpi_os_allocate(acpi_size size) {
+	return kmalloc(size, irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL);
+}
+static inline void *acpi_os_allocate_zeroed(acpi_size size) {
+	return kzalloc(size, irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL);
+}
+
+static inline void *acpi_os_acquire_object(acpi_cache_t * cache) {
+        return kmem_cache_zalloc(cache, irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL);
+}
+
+#define ACPI_ALLOCATE(a)	acpi_os_allocate(a)
+#define ACPI_ALLOCATE_ZEROED(a)	acpi_os_allocate_zeroed(a)
+#define ACPI_FREE(a)		kfree(a)
 
 #endif				/* __ACLINUX_H__ */
diff -urN linux-2.6.18-rc1/include/asm-alpha/barrier.h linux-2.6.18-rc2/include/asm-alpha/barrier.h
--- linux-2.6.18-rc1/include/asm-alpha/barrier.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-alpha/barrier.h	2006-07-15 22:34:48.773670084 +0000
@@ -30,7 +30,4 @@
 #define set_mb(var, value) \
 do { var = value; mb(); } while (0)
 
-#define set_wmb(var, value) \
-do { var = value; wmb(); } while (0)
-
 #endif		/* __BARRIER_H */
diff -urN linux-2.6.18-rc1/include/asm-arm/arch-versatile/platform.h linux-2.6.18-rc2/include/asm-arm/arch-versatile/platform.h
--- linux-2.6.18-rc1/include/asm-arm/arch-versatile/platform.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-arm/arch-versatile/platform.h	2006-07-15 22:34:48.801673124 +0000
@@ -65,6 +65,8 @@
 #define VERSATILE_SYS_OSC1_OFFSET             0x1C
 #endif
 
+#define VERSATILE_SYS_OSCCLCD_OFFSET          0x1c
+
 #define VERSATILE_SYS_LOCK_OFFSET             0x20
 #define VERSATILE_SYS_100HZ_OFFSET            0x24
 #define VERSATILE_SYS_CFGDATA1_OFFSET         0x28
diff -urN linux-2.6.18-rc1/include/asm-arm/system.h linux-2.6.18-rc2/include/asm-arm/system.h
--- linux-2.6.18-rc1/include/asm-arm/system.h	2006-07-15 22:34:43.509098625 +0000
+++ linux-2.6.18-rc2/include/asm-arm/system.h	2006-07-15 22:34:48.809673992 +0000
@@ -176,7 +176,6 @@
 #define wmb() mb()
 #define read_barrier_depends() do { } while(0)
 #define set_mb(var, value)  do { var = value; mb(); } while (0)
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
 #define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
 
 /*
diff -urN linux-2.6.18-rc1/include/asm-arm26/system.h linux-2.6.18-rc2/include/asm-arm26/system.h
--- linux-2.6.18-rc1/include/asm-arm26/system.h	2006-07-15 22:34:43.513099059 +0000
+++ linux-2.6.18-rc2/include/asm-arm26/system.h	2006-07-15 22:34:48.817674861 +0000
@@ -90,7 +90,6 @@
 
 #define read_barrier_depends() do { } while(0)
 #define set_mb(var, value)  do { var = value; mb(); } while (0)
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
 
 /*
  * We assume knowledge of how
diff -urN linux-2.6.18-rc1/include/asm-cris/system.h linux-2.6.18-rc2/include/asm-cris/system.h
--- linux-2.6.18-rc1/include/asm-cris/system.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-cris/system.h	2006-07-15 22:34:48.821675295 +0000
@@ -17,7 +17,6 @@
 #define wmb() mb()
 #define read_barrier_depends() do { } while(0)
 #define set_mb(var, value)  do { var = value; mb(); } while (0)
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
 
 #ifdef CONFIG_SMP
 #define smp_mb()        mb()
diff -urN linux-2.6.18-rc1/include/asm-frv/elf.h linux-2.6.18-rc2/include/asm-frv/elf.h
--- linux-2.6.18-rc1/include/asm-frv/elf.h	2006-07-15 22:34:43.517099493 +0000
+++ linux-2.6.18-rc2/include/asm-frv/elf.h	2006-07-15 22:34:48.821675295 +0000
@@ -64,7 +64,7 @@
 #define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
 typedef elf_greg_t elf_gregset_t[ELF_NGREG];
 
-typedef struct fpmedia_struct elf_fpregset_t;
+typedef struct user_fpmedia_regs elf_fpregset_t;
 
 /*
  * This is used to ensure we don't load something for the wrong architecture.
@@ -116,6 +116,7 @@
 } while(0)
 
 #define USE_ELF_CORE_DUMP
+#define ELF_FDPIC_CORE_EFLAGS	EF_FRV_FDPIC
 #define ELF_EXEC_PAGESIZE	16384
 
 /* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
@@ -125,9 +126,6 @@
 
 #define ELF_ET_DYN_BASE         0x08000000UL
 
-#define ELF_CORE_COPY_REGS(pr_reg, regs)				\
-	memcpy(&pr_reg[0], &regs->sp, 31 * sizeof(uint32_t));
-
 /* This yields a mask that user programs can use to figure out what
    instruction set this cpu supports.  */
 
diff -urN linux-2.6.18-rc1/include/asm-frv/gdb-stub.h linux-2.6.18-rc2/include/asm-frv/gdb-stub.h
--- linux-2.6.18-rc1/include/asm-frv/gdb-stub.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-frv/gdb-stub.h	2006-07-15 22:34:48.821675295 +0000
@@ -89,6 +89,7 @@
 
 extern asmlinkage void __debug_stub_init_break(void);
 extern asmlinkage void __break_hijack_kernel_event(void);
+extern asmlinkage void __break_hijack_kernel_event_breaks_here(void);
 extern asmlinkage void start_kernel(void);
 
 extern asmlinkage void gdbstub_rx_handler(void);
@@ -114,5 +115,26 @@
 #define gdbstub_proto(FMT,...) ({ 0; })
 #endif
 
+/*
+ * we dedicate GR31 to keeping a pointer to the gdbstub exception frame
+ * - gr31 is destroyed on entry to the gdbstub if !MMU
+ * - gr31 is saved in scr3 on entry to the gdbstub if in !MMU
+ */
+register struct frv_frame0 *__debug_frame0 asm("gr31");
+
+#define __debug_frame		(&__debug_frame0->regs)
+#define __debug_user_context	(&__debug_frame0->uc)
+#define __debug_regs		(&__debug_frame0->debug)
+#define __debug_reg(X)		((unsigned long *) ((unsigned long) &__debug_frame0 + (X)))
+
+struct frv_debug_status {
+	unsigned long		bpsr;
+	unsigned long		dcr;
+	unsigned long		brr;
+	unsigned long		nmar;
+};
+
+extern struct frv_debug_status __debug_status;
+
 #endif /* _LANGUAGE_ASSEMBLY */
 #endif /* __ASM_GDB_STUB_H */
diff -urN linux-2.6.18-rc1/include/asm-frv/processor.h linux-2.6.18-rc2/include/asm-frv/processor.h
--- linux-2.6.18-rc1/include/asm-frv/processor.h	2006-07-15 22:34:43.517099493 +0000
+++ linux-2.6.18-rc2/include/asm-frv/processor.h	2006-07-15 22:34:48.825675729 +0000
@@ -21,6 +21,7 @@
  */
 #define current_text_addr() ({ __label__ _l; _l: &&_l;})
 
+#include <linux/compiler.h>
 #include <linux/linkage.h>
 #include <asm/sections.h>
 #include <asm/segment.h>
@@ -139,7 +140,7 @@
 extern struct task_struct *alloc_task_struct(void);
 extern void free_task_struct(struct task_struct *p);
 
-#define cpu_relax()    do { } while (0)
+#define cpu_relax()    barrier()
 
 /* data cache prefetch */
 #define ARCH_HAS_PREFETCH
diff -urN linux-2.6.18-rc1/include/asm-frv/ptrace.h linux-2.6.18-rc2/include/asm-frv/ptrace.h
--- linux-2.6.18-rc1/include/asm-frv/ptrace.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-frv/ptrace.h	2006-07-15 22:34:48.825675729 +0000
@@ -62,18 +62,10 @@
 #ifndef __ASSEMBLY__
 
 /*
- * dedicate GR28; to keeping the a pointer to the current exception frame
+ * we dedicate GR28 to keeping a pointer to the current exception frame
+ * - gr28 is destroyed on entry to the kernel from userspace
  */
 register struct pt_regs *__frame asm("gr28");
-register struct pt_regs *__debug_frame asm("gr31");
-
-#ifndef container_of
-#define container_of(ptr, type, member) ({			\
-        const typeof( ((type *)0)->member ) *__mptr = (ptr);	\
-        (type *)( (char *)__mptr - offsetof(type,member) );})
-#endif
-
-#define __debug_regs container_of(__debug_frame, struct pt_debug_regs, normal_regs)
 
 #define user_mode(regs)			(!((regs)->psr & PSR_S))
 #define instruction_pointer(regs)	((regs)->pc)
diff -urN linux-2.6.18-rc1/include/asm-frv/registers.h linux-2.6.18-rc2/include/asm-frv/registers.h
--- linux-2.6.18-rc1/include/asm-frv/registers.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-frv/registers.h	2006-07-15 22:34:48.825675729 +0000
@@ -23,7 +23,13 @@
  *
  *	+0x2000	+----------------------
  *		| union {
- *		|	struct user_context
+ *		|	struct frv_frame0 {
+ *		|		struct user_context {
+ *		|			struct user_int_regs
+ *		|			struct user_fpmedia_regs
+ *		|		}
+ *		|		struct frv_debug_regs
+ *		|	}
  *		|	struct pt_regs [user exception]
  *		| }
  *		+---------------------- <-- __kernel_frame0_ptr (maybe GR28)
@@ -51,11 +57,11 @@
 #define _ASM_REGISTERS_H
 
 #ifndef __ASSEMBLY__
-#define __OFFSET(X)	(X)
+#define __OFFSET(X,N)	((X)+(N)*4)
 #define __OFFSETC(X,N)	xxxxxxxxxxxxxxxxxxxxxxxx
 #else
-#define __OFFSET(X)	((X)*4)
-#define __OFFSETC(X,N)	((X)*4+(N))
+#define __OFFSET(X,N)	((X)+(N)*4)
+#define __OFFSETC(X,N)	((X)+(N))
 #endif
 
 /*****************************************************************************/
@@ -117,30 +123,13 @@
 
 #endif
 
-#define REG_PSR		__OFFSET( 0)	/* Processor Status Register */
-#define REG_ISR		__OFFSET( 1)	/* Integer Status Register */
-#define REG_CCR		__OFFSET( 2)	/* Condition Code Register */
-#define REG_CCCR	__OFFSET( 3)	/* Condition Code for Conditional Insns Register */
-#define REG_LR		__OFFSET( 4)	/* Link Register */
-#define REG_LCR		__OFFSET( 5)	/* Loop Count Register */
-#define REG_PC		__OFFSET( 6)	/* Program Counter */
-
-#define REG__STATUS	__OFFSET( 7)	/* exception status */
 #define REG__STATUS_STEP	0x00000001	/* - reenable single stepping on return */
 #define REG__STATUS_STEPPED	0x00000002	/* - single step caused exception */
 #define REG__STATUS_BROKE	0x00000004	/* - BREAK insn caused exception */
 #define REG__STATUS_SYSC_ENTRY	0x40000000	/* - T on syscall entry (ptrace.c only) */
 #define REG__STATUS_SYSC_EXIT	0x80000000	/* - T on syscall exit (ptrace.c only) */
 
-#define REG_SYSCALLNO	__OFFSET( 8)	/* syscall number or -1 */
-#define REG_ORIG_GR8	__OFFSET( 9)	/* saved GR8 for signal handling */
-#define REG_GNER0	__OFFSET(10)
-#define REG_GNER1	__OFFSET(11)
-#define REG_IACC0	__OFFSET(12)
-
-#define REG_TBR		__OFFSET(14)	/* Trap Vector Register */
-#define REG_GR(R)	__OFFSET((14+(R)))
-#define REG__END	REG_GR(32)
+#define REG_GR(R)	__OFFSET(REG_GR0, (R))
 
 #define REG_SP		REG_GR(1)
 #define REG_FP		REG_GR(2)
@@ -149,27 +138,21 @@
 
 /*****************************************************************************/
 /*
- * extension tacked in front of the exception frame in debug mode
+ * debugging registers
  */
 #ifndef __ASSEMBLY__
 
-struct pt_debug_regs
+struct frv_debug_regs
 {
-	unsigned long		bpsr;
 	unsigned long		dcr;
-	unsigned long		brr;
-	unsigned long		nmar;
-	struct pt_regs		normal_regs;
+	unsigned long		ibar[4] __attribute__((aligned(8)));
+	unsigned long		dbar[4] __attribute__((aligned(8)));
+	unsigned long		dbdr[4][4] __attribute__((aligned(8)));
+	unsigned long		dbmr[4][4] __attribute__((aligned(8)));
 } __attribute__((aligned(8)));
 
 #endif
 
-#define REG_NMAR		__OFFSET(-1)
-#define REG_BRR			__OFFSET(-2)
-#define REG_DCR			__OFFSET(-3)
-#define REG_BPSR		__OFFSET(-4)
-#define REG__DEBUG_XTRA		__OFFSET(4)
-
 /*****************************************************************************/
 /*
  * userspace registers
@@ -223,33 +206,27 @@
 	void *extension;
 } __attribute__((aligned(8)));
 
+struct frv_frame0 {
+	union {
+		struct pt_regs		regs;
+		struct user_context	uc;
+	};
+
+	struct frv_debug_regs		debug;
+
+} __attribute__((aligned(32)));
+
 #endif
 
-#define NR_USER_INT_REGS	(14 + 64)
-#define NR_USER_FPMEDIA_REGS	(64 + 2 + 2 + 8 + 8/4 + 1)
-#define NR_USER_CONTEXT		(NR_USER_INT_REGS + NR_USER_FPMEDIA_REGS + 1)
-
-#define USER_CONTEXT_SIZE	(((NR_USER_CONTEXT + 1) & ~1) * 4)
-
-#define __THREAD_FRAME		__OFFSET(0)
-#define __THREAD_CURR		__OFFSET(1)
-#define __THREAD_SP		__OFFSET(2)
-#define __THREAD_FP		__OFFSET(3)
-#define __THREAD_LR		__OFFSET(4)
-#define __THREAD_PC		__OFFSET(5)
-#define __THREAD_GR(R)		__OFFSET(6 + (R) - 16)
-#define __THREAD_FRAME0		__OFFSET(19)
-#define __THREAD_USER		__OFFSET(19)
-
-#define __USER_INT		__OFFSET(0)
-#define __INT_GR(R)		__OFFSET(14 + (R))
-
-#define __USER_FPMEDIA		__OFFSET(NR_USER_INT_REGS)
-#define __FPMEDIA_FR(R)		__OFFSET(NR_USER_INT_REGS + (R))
-#define __FPMEDIA_FNER(R)	__OFFSET(NR_USER_INT_REGS + 64 + (R))
-#define __FPMEDIA_MSR(R)	__OFFSET(NR_USER_INT_REGS + 66 + (R))
-#define __FPMEDIA_ACC(R)	__OFFSET(NR_USER_INT_REGS + 68 + (R))
-#define __FPMEDIA_ACCG(R)	__OFFSETC(NR_USER_INT_REGS + 76, (R))
-#define __FPMEDIA_FSR(R)	__OFFSET(NR_USER_INT_REGS + 78 + (R))
+#define __INT_GR(R)		__OFFSET(__INT_GR0,		(R))
+
+#define __FPMEDIA_FR(R)		__OFFSET(__FPMEDIA_FR0,		(R))
+#define __FPMEDIA_FNER(R)	__OFFSET(__FPMEDIA_FNER0,	(R))
+#define __FPMEDIA_MSR(R)	__OFFSET(__FPMEDIA_MSR0,	(R))
+#define __FPMEDIA_ACC(R)	__OFFSET(__FPMEDIA_ACC0,	(R))
+#define __FPMEDIA_ACCG(R)	__OFFSETC(__FPMEDIA_ACCG0,	(R))
+#define __FPMEDIA_FSR(R)	__OFFSET(__FPMEDIA_FSR0,	(R))
+
+#define __THREAD_GR(R)		__OFFSET(__THREAD_GR16,		(R) - 16)
 
 #endif /* _ASM_REGISTERS_H */
diff -urN linux-2.6.18-rc1/include/asm-frv/system.h linux-2.6.18-rc2/include/asm-frv/system.h
--- linux-2.6.18-rc1/include/asm-frv/system.h	2006-07-15 22:34:43.517099493 +0000
+++ linux-2.6.18-rc2/include/asm-frv/system.h	2006-07-15 22:34:48.825675729 +0000
@@ -179,7 +179,6 @@
 #define rmb()			asm volatile ("membar" : : :"memory")
 #define wmb()			asm volatile ("membar" : : :"memory")
 #define set_mb(var, value)	do { var = value; mb(); } while (0)
-#define set_wmb(var, value)	do { var = value; wmb(); } while (0)
 
 #define smp_mb()		mb()
 #define smp_rmb()		rmb()
diff -urN linux-2.6.18-rc1/include/asm-frv/thread_info.h linux-2.6.18-rc2/include/asm-frv/thread_info.h
--- linux-2.6.18-rc1/include/asm-frv/thread_info.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-frv/thread_info.h	2006-07-15 22:34:48.825675729 +0000
@@ -19,6 +19,8 @@
 #include <asm/processor.h>
 #endif
 
+#define THREAD_SIZE		8192
+
 /*
  * low level task data that entry.S needs immediate access to
  * - this struct should fit entirely inside of one cache line
@@ -46,15 +48,7 @@
 
 #else /* !__ASSEMBLY__ */
 
-/* offsets into the thread_info struct for assembly code access */
-#define TI_TASK			0x00000000
-#define TI_EXEC_DOMAIN		0x00000004
-#define TI_FLAGS		0x00000008
-#define TI_STATUS		0x0000000C
-#define TI_CPU			0x00000010
-#define TI_PRE_COUNT		0x00000014
-#define TI_ADDR_LIMIT		0x00000018
-#define TI_RESTART_BLOCK	0x0000001C
+#include <asm/asm-offsets.h>
 
 #endif
 
@@ -83,12 +77,6 @@
 #define init_thread_info	(init_thread_union.thread_info)
 #define init_stack		(init_thread_union.stack)
 
-#ifdef CONFIG_SMALL_TASKS
-#define THREAD_SIZE		4096
-#else
-#define THREAD_SIZE		8192
-#endif
-
 /* how to get the thread information struct from C */
 register struct thread_info *__current_thread_info asm("gr15");
 
@@ -111,11 +99,7 @@
 
 #define free_thread_info(info)	kfree(info)
 
-#else /* !__ASSEMBLY__ */
-
-#define THREAD_SIZE	8192
-
-#endif
+#endif /* __ASSEMBLY__ */
 
 /*
  * thread information flags
diff -urN linux-2.6.18-rc1/include/asm-generic/Kbuild.asm linux-2.6.18-rc2/include/asm-generic/Kbuild.asm
--- linux-2.6.18-rc1/include/asm-generic/Kbuild.asm	2006-07-15 22:34:43.521099927 +0000
+++ linux-2.6.18-rc2/include/asm-generic/Kbuild.asm	2006-07-15 22:34:48.825675729 +0000
@@ -1,11 +1,8 @@
 unifdef-y += a.out.h auxvec.h byteorder.h errno.h fcntl.h ioctl.h	\
-	ioctls.h ipcbuf.h irq.h mman.h msgbuf.h param.h poll.h		\
+	ioctls.h ipcbuf.h mman.h msgbuf.h param.h poll.h		\
 	posix_types.h ptrace.h resource.h sembuf.h shmbuf.h shmparam.h	\
 	sigcontext.h siginfo.h signal.h socket.h sockios.h stat.h	\
 	statfs.h termbits.h termios.h timex.h types.h unistd.h user.h
 
-# These really shouldn't be exported
-unifdef-y += atomic.h io.h
-
 # These probably shouldn't be exported
 unifdef-y += elf.h page.h
diff -urN linux-2.6.18-rc1/include/asm-h8300/page.h linux-2.6.18-rc2/include/asm-h8300/page.h
--- linux-2.6.18-rc1/include/asm-h8300/page.h	2006-07-15 22:34:43.525100362 +0000
+++ linux-2.6.18-rc2/include/asm-h8300/page.h	2006-07-15 22:34:48.829676164 +0000
@@ -66,7 +66,6 @@
 
 #define MAP_NR(addr)		(((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)
 #define virt_to_page(addr)	(mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
-#define virt_to_page(addr)	(mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
 #define page_to_virt(page)	((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
 #define pfn_valid(page)	        (page < max_mapnr)
 
diff -urN linux-2.6.18-rc1/include/asm-h8300/processor.h linux-2.6.18-rc2/include/asm-h8300/processor.h
--- linux-2.6.18-rc1/include/asm-h8300/processor.h	2006-07-15 22:34:43.525100362 +0000
+++ linux-2.6.18-rc2/include/asm-h8300/processor.h	2006-07-15 22:34:48.829676164 +0000
@@ -17,6 +17,7 @@
  */
 #define current_text_addr() ({ __label__ _l; _l: &&_l;})
 
+#include <linux/compiler.h>
 #include <asm/segment.h>
 #include <asm/fpu.h>
 #include <asm/ptrace.h>
@@ -129,6 +130,6 @@
 	eip; })
 #define	KSTK_ESP(tsk)	((tsk) == current ? rdusp() : (tsk)->thread.usp)
 
-#define cpu_relax()    do { } while (0)
+#define cpu_relax()    barrier()
 
 #endif
diff -urN linux-2.6.18-rc1/include/asm-h8300/system.h linux-2.6.18-rc2/include/asm-h8300/system.h
--- linux-2.6.18-rc1/include/asm-h8300/system.h	2006-07-15 22:34:43.525100362 +0000
+++ linux-2.6.18-rc2/include/asm-h8300/system.h	2006-07-15 22:34:48.833676598 +0000
@@ -84,7 +84,6 @@
 #define wmb()  asm volatile (""   : : :"memory")
 #define set_rmb(var, value)    do { xchg(&var, value); } while (0)
 #define set_mb(var, value)     set_rmb(var, value)
-#define set_wmb(var, value)    do { var = value; wmb(); } while (0)
 
 #ifdef CONFIG_SMP
 #define smp_mb()	mb()
diff -urN linux-2.6.18-rc1/include/asm-i386/atomic.h linux-2.6.18-rc2/include/asm-i386/atomic.h
--- linux-2.6.18-rc1/include/asm-i386/atomic.h	2006-07-15 22:34:43.525100362 +0000
+++ linux-2.6.18-rc2/include/asm-i386/atomic.h	2006-07-15 22:34:48.833676598 +0000
@@ -46,8 +46,8 @@
 {
 	__asm__ __volatile__(
 		LOCK_PREFIX "addl %1,%0"
-		:"=m" (v->counter)
-		:"ir" (i), "m" (v->counter));
+		:"+m" (v->counter)
+		:"ir" (i));
 }
 
 /**
@@ -61,8 +61,8 @@
 {
 	__asm__ __volatile__(
 		LOCK_PREFIX "subl %1,%0"
-		:"=m" (v->counter)
-		:"ir" (i), "m" (v->counter));
+		:"+m" (v->counter)
+		:"ir" (i));
 }
 
 /**
@@ -80,8 +80,8 @@
 
 	__asm__ __volatile__(
 		LOCK_PREFIX "subl %2,%0; sete %1"
-		:"=m" (v->counter), "=qm" (c)
-		:"ir" (i), "m" (v->counter) : "memory");
+		:"+m" (v->counter), "=qm" (c)
+		:"ir" (i) : "memory");
 	return c;
 }
 
@@ -95,8 +95,7 @@
 {
 	__asm__ __volatile__(
 		LOCK_PREFIX "incl %0"
-		:"=m" (v->counter)
-		:"m" (v->counter));
+		:"+m" (v->counter));
 }
 
 /**
@@ -109,8 +108,7 @@
 {
 	__asm__ __volatile__(
 		LOCK_PREFIX "decl %0"
-		:"=m" (v->counter)
-		:"m" (v->counter));
+		:"+m" (v->counter));
 }
 
 /**
@@ -127,8 +125,8 @@
 
 	__asm__ __volatile__(
 		LOCK_PREFIX "decl %0; sete %1"
-		:"=m" (v->counter), "=qm" (c)
-		:"m" (v->counter) : "memory");
+		:"+m" (v->counter), "=qm" (c)
+		: : "memory");
 	return c != 0;
 }
 
@@ -146,8 +144,8 @@
 
 	__asm__ __volatile__(
 		LOCK_PREFIX "incl %0; sete %1"
-		:"=m" (v->counter), "=qm" (c)
-		:"m" (v->counter) : "memory");
+		:"+m" (v->counter), "=qm" (c)
+		: : "memory");
 	return c != 0;
 }
 
@@ -166,8 +164,8 @@
 
 	__asm__ __volatile__(
 		LOCK_PREFIX "addl %2,%0; sets %1"
-		:"=m" (v->counter), "=qm" (c)
-		:"ir" (i), "m" (v->counter) : "memory");
+		:"+m" (v->counter), "=qm" (c)
+		:"ir" (i) : "memory");
 	return c;
 }
 
diff -urN linux-2.6.18-rc1/include/asm-i386/futex.h linux-2.6.18-rc2/include/asm-i386/futex.h
--- linux-2.6.18-rc1/include/asm-i386/futex.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-i386/futex.h	2006-07-15 22:34:48.837677032 +0000
@@ -20,8 +20,8 @@
 	.align	8\n\
 	.long	1b,3b\n\
 	.previous"						\
-	: "=r" (oldval), "=r" (ret), "=m" (*uaddr)		\
-	: "i" (-EFAULT), "m" (*uaddr), "0" (oparg), "1" (0))
+	: "=r" (oldval), "=r" (ret), "+m" (*uaddr)		\
+	: "i" (-EFAULT), "0" (oparg), "1" (0))
 
 #define __futex_atomic_op2(insn, ret, oldval, uaddr, oparg) \
   __asm__ __volatile (						\
@@ -38,9 +38,9 @@
 	.align	8\n\
 	.long	1b,4b,2b,4b\n\
 	.previous"						\
-	: "=&a" (oldval), "=&r" (ret), "=m" (*uaddr),		\
+	: "=&a" (oldval), "=&r" (ret), "+m" (*uaddr),		\
 	  "=&r" (tem)						\
-	: "r" (oparg), "i" (-EFAULT), "m" (*uaddr), "1" (0))
+	: "r" (oparg), "i" (-EFAULT), "1" (0))
 
 static inline int
 futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
@@ -123,7 +123,7 @@
 		"	.long   1b,3b				\n"
 		"	.previous				\n"
 
-		: "=a" (oldval), "=m" (*uaddr)
+		: "=a" (oldval), "+m" (*uaddr)
 		: "i" (-EFAULT), "r" (newval), "0" (oldval)
 		: "memory"
 	);
diff -urN linux-2.6.18-rc1/include/asm-i386/local.h linux-2.6.18-rc2/include/asm-i386/local.h
--- linux-2.6.18-rc1/include/asm-i386/local.h	2006-07-15 22:34:43.529100796 +0000
+++ linux-2.6.18-rc2/include/asm-i386/local.h	2006-07-15 22:34:48.837677032 +0000
@@ -17,32 +17,30 @@
 {
 	__asm__ __volatile__(
 		"incl %0"
-		:"=m" (v->counter)
-		:"m" (v->counter));
+		:"+m" (v->counter));
 }
 
 static __inline__ void local_dec(local_t *v)
 {
 	__asm__ __volatile__(
 		"decl %0"
-		:"=m" (v->counter)
-		:"m" (v->counter));
+		:"+m" (v->counter));
 }
 
 static __inline__ void local_add(long i, local_t *v)
 {
 	__asm__ __volatile__(
 		"addl %1,%0"
-		:"=m" (v->counter)
-		:"ir" (i), "m" (v->counter));
+		:"+m" (v->counter)
+		:"ir" (i));
 }
 
 static __inline__ void local_sub(long i, local_t *v)
 {
 	__asm__ __volatile__(
 		"subl %1,%0"
-		:"=m" (v->counter)
-		:"ir" (i), "m" (v->counter));
+		:"+m" (v->counter)
+		:"ir" (i));
 }
 
 /* On x86, these are no better than the atomic variants. */
diff -urN linux-2.6.18-rc1/include/asm-i386/posix_types.h linux-2.6.18-rc2/include/asm-i386/posix_types.h
--- linux-2.6.18-rc1/include/asm-i386/posix_types.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-i386/posix_types.h	2006-07-15 22:34:48.845677900 +0000
@@ -51,12 +51,12 @@
 #undef	__FD_SET
 #define __FD_SET(fd,fdsetp) \
 		__asm__ __volatile__("btsl %1,%0": \
-			"=m" (*(__kernel_fd_set *) (fdsetp)):"r" ((int) (fd)))
+			"+m" (*(__kernel_fd_set *) (fdsetp)):"r" ((int) (fd)))
 
 #undef	__FD_CLR
 #define __FD_CLR(fd,fdsetp) \
 		__asm__ __volatile__("btrl %1,%0": \
-			"=m" (*(__kernel_fd_set *) (fdsetp)):"r" ((int) (fd)))
+			"+m" (*(__kernel_fd_set *) (fdsetp)):"r" ((int) (fd)))
 
 #undef	__FD_ISSET
 #define __FD_ISSET(fd,fdsetp) (__extension__ ({ \
diff -urN linux-2.6.18-rc1/include/asm-i386/rwlock.h linux-2.6.18-rc2/include/asm-i386/rwlock.h
--- linux-2.6.18-rc1/include/asm-i386/rwlock.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-i386/rwlock.h	2006-07-15 22:34:48.845677900 +0000
@@ -37,7 +37,7 @@
 			"popl %%eax\n\t" \
 			"1:\n", \
 			"subl $1,%0\n\t", \
-			"=m" (*(volatile int *)rw) : : "memory")
+			"+m" (*(volatile int *)rw) : : "memory")
 
 #define __build_read_lock(rw, helper)	do { \
 						if (__builtin_constant_p(rw)) \
@@ -63,7 +63,7 @@
 			"popl %%eax\n\t" \
 			"1:\n", \
 			"subl $" RW_LOCK_BIAS_STR ",%0\n\t", \
-			"=m" (*(volatile int *)rw) : : "memory")
+			"+m" (*(volatile int *)rw) : : "memory")
 
 #define __build_write_lock(rw, helper)	do { \
 						if (__builtin_constant_p(rw)) \
diff -urN linux-2.6.18-rc1/include/asm-i386/rwsem.h linux-2.6.18-rc2/include/asm-i386/rwsem.h
--- linux-2.6.18-rc1/include/asm-i386/rwsem.h	2006-07-15 22:34:43.537101664 +0000
+++ linux-2.6.18-rc2/include/asm-i386/rwsem.h	2006-07-15 22:34:48.845677900 +0000
@@ -111,8 +111,8 @@
 		"  jmp       1b\n"
 		LOCK_SECTION_END
 		"# ending down_read\n\t"
-		: "=m"(sem->count)
-		: "a"(sem), "m"(sem->count)
+		: "+m" (sem->count)
+		: "a" (sem)
 		: "memory", "cc");
 }
 
@@ -133,8 +133,8 @@
 		"  jnz	     1b\n\t"
 		"2:\n\t"
 		"# ending __down_read_trylock\n\t"
-		: "+m"(sem->count), "=&a"(result), "=&r"(tmp)
-		: "i"(RWSEM_ACTIVE_READ_BIAS)
+		: "+m" (sem->count), "=&a" (result), "=&r" (tmp)
+		: "i" (RWSEM_ACTIVE_READ_BIAS)
 		: "memory", "cc");
 	return result>=0 ? 1 : 0;
 }
@@ -161,8 +161,8 @@
 		"  jmp       1b\n"
 		LOCK_SECTION_END
 		"# ending down_write"
-		: "=m"(sem->count), "=d"(tmp)
-		: "a"(sem), "1"(tmp), "m"(sem->count)
+		: "+m" (sem->count), "=d" (tmp)
+		: "a" (sem), "1" (tmp)
 		: "memory", "cc");
 }
 
@@ -205,8 +205,8 @@
 		"  jmp       1b\n"
 		LOCK_SECTION_END
 		"# ending __up_read\n"
-		: "=m"(sem->count), "=d"(tmp)
-		: "a"(sem), "1"(tmp), "m"(sem->count)
+		: "+m" (sem->count), "=d" (tmp)
+		: "a" (sem), "1" (tmp)
 		: "memory", "cc");
 }
 
@@ -231,8 +231,8 @@
 		"  jmp       1b\n"
 		LOCK_SECTION_END
 		"# ending __up_write\n"
-		: "=m"(sem->count)
-		: "a"(sem), "i"(-RWSEM_ACTIVE_WRITE_BIAS), "m"(sem->count)
+		: "+m" (sem->count)
+		: "a" (sem), "i" (-RWSEM_ACTIVE_WRITE_BIAS)
 		: "memory", "cc", "edx");
 }
 
@@ -256,8 +256,8 @@
 		"  jmp       1b\n"
 		LOCK_SECTION_END
 		"# ending __downgrade_write\n"
-		: "=m"(sem->count)
-		: "a"(sem), "i"(-RWSEM_WAITING_BIAS), "m"(sem->count)
+		: "+m" (sem->count)
+		: "a" (sem), "i" (-RWSEM_WAITING_BIAS)
 		: "memory", "cc");
 }
 
@@ -268,8 +268,8 @@
 {
 	__asm__ __volatile__(
 LOCK_PREFIX	"addl %1,%0"
-		: "=m"(sem->count)
-		: "ir"(delta), "m"(sem->count));
+		: "+m" (sem->count)
+		: "ir" (delta));
 }
 
 /*
@@ -280,10 +280,9 @@
 	int tmp = delta;
 
 	__asm__ __volatile__(
-LOCK_PREFIX	"xadd %0,(%2)"
-		: "+r"(tmp), "=m"(sem->count)
-		: "r"(sem), "m"(sem->count)
-		: "memory");
+LOCK_PREFIX	"xadd %0,%1"
+		: "+r" (tmp), "+m" (sem->count)
+		: : "memory");
 
 	return tmp+delta;
 }
diff -urN linux-2.6.18-rc1/include/asm-i386/semaphore.h linux-2.6.18-rc2/include/asm-i386/semaphore.h
--- linux-2.6.18-rc1/include/asm-i386/semaphore.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-i386/semaphore.h	2006-07-15 22:34:48.845677900 +0000
@@ -107,7 +107,7 @@
 		"call __down_failed\n\t"
 		"jmp 1b\n"
 		LOCK_SECTION_END
-		:"=m" (sem->count)
+		:"+m" (sem->count)
 		:
 		:"memory","ax");
 }
@@ -132,7 +132,7 @@
 		"call __down_failed_interruptible\n\t"
 		"jmp 1b\n"
 		LOCK_SECTION_END
-		:"=a" (result), "=m" (sem->count)
+		:"=a" (result), "+m" (sem->count)
 		:
 		:"memory");
 	return result;
@@ -157,7 +157,7 @@
 		"call __down_failed_trylock\n\t"
 		"jmp 1b\n"
 		LOCK_SECTION_END
-		:"=a" (result), "=m" (sem->count)
+		:"=a" (result), "+m" (sem->count)
 		:
 		:"memory");
 	return result;
@@ -182,7 +182,7 @@
 		"jmp 1b\n"
 		LOCK_SECTION_END
 		".subsection 0\n"
-		:"=m" (sem->count)
+		:"+m" (sem->count)
 		:
 		:"memory","ax");
 }
diff -urN linux-2.6.18-rc1/include/asm-i386/spinlock.h linux-2.6.18-rc2/include/asm-i386/spinlock.h
--- linux-2.6.18-rc1/include/asm-i386/spinlock.h	2006-07-15 22:34:43.537101664 +0000
+++ linux-2.6.18-rc2/include/asm-i386/spinlock.h	2006-07-15 22:34:48.845677900 +0000
@@ -65,7 +65,7 @@
 	alternative_smp(
 		__raw_spin_lock_string,
 		__raw_spin_lock_string_up,
-		"=m" (lock->slock) : : "memory");
+		"+m" (lock->slock) : : "memory");
 }
 
 /*
@@ -79,7 +79,7 @@
 	alternative_smp(
 		__raw_spin_lock_string_flags,
 		__raw_spin_lock_string_up,
-		"=m" (lock->slock) : "r" (flags) : "memory");
+		"+m" (lock->slock) : "r" (flags) : "memory");
 }
 #endif
 
@@ -88,7 +88,7 @@
 	char oldval;
 	__asm__ __volatile__(
 		"xchgb %b0,%1"
-		:"=q" (oldval), "=m" (lock->slock)
+		:"=q" (oldval), "+m" (lock->slock)
 		:"0" (0) : "memory");
 	return oldval > 0;
 }
@@ -104,7 +104,7 @@
 
 #define __raw_spin_unlock_string \
 	"movb $1,%0" \
-		:"=m" (lock->slock) : : "memory"
+		:"+m" (lock->slock) : : "memory"
 
 
 static inline void __raw_spin_unlock(raw_spinlock_t *lock)
@@ -118,7 +118,7 @@
 
 #define __raw_spin_unlock_string \
 	"xchgb %b0, %1" \
-		:"=q" (oldval), "=m" (lock->slock) \
+		:"=q" (oldval), "+m" (lock->slock) \
 		:"0" (oldval) : "memory"
 
 static inline void __raw_spin_unlock(raw_spinlock_t *lock)
@@ -199,13 +199,13 @@
 
 static inline void __raw_read_unlock(raw_rwlock_t *rw)
 {
-	asm volatile(LOCK_PREFIX "incl %0" :"=m" (rw->lock) : : "memory");
+	asm volatile(LOCK_PREFIX "incl %0" :"+m" (rw->lock) : : "memory");
 }
 
 static inline void __raw_write_unlock(raw_rwlock_t *rw)
 {
 	asm volatile(LOCK_PREFIX "addl $" RW_LOCK_BIAS_STR ", %0"
-				 : "=m" (rw->lock) : : "memory");
+				 : "+m" (rw->lock) : : "memory");
 }
 
 #endif /* __ASM_SPINLOCK_H */
diff -urN linux-2.6.18-rc1/include/asm-i386/system.h linux-2.6.18-rc2/include/asm-i386/system.h
--- linux-2.6.18-rc1/include/asm-i386/system.h	2006-07-15 22:34:43.537101664 +0000
+++ linux-2.6.18-rc2/include/asm-i386/system.h	2006-07-15 22:34:48.845677900 +0000
@@ -82,10 +82,6 @@
 #define savesegment(seg, value) \
 	asm volatile("mov %%" #seg ",%0":"=rm" (value))
 
-/*
- * Clear and set 'TS' bit respectively
- */
-#define clts() __asm__ __volatile__ ("clts")
 #define read_cr0() ({ \
 	unsigned int __dummy; \
 	__asm__ __volatile__( \
@@ -94,7 +90,7 @@
 	__dummy; \
 })
 #define write_cr0(x) \
-	__asm__ __volatile__("movl %0,%%cr0": :"r" (x));
+	__asm__ __volatile__("movl %0,%%cr0": :"r" (x))
 
 #define read_cr2() ({ \
 	unsigned int __dummy; \
@@ -104,7 +100,7 @@
 	__dummy; \
 })
 #define write_cr2(x) \
-	__asm__ __volatile__("movl %0,%%cr2": :"r" (x));
+	__asm__ __volatile__("movl %0,%%cr2": :"r" (x))
 
 #define read_cr3() ({ \
 	unsigned int __dummy; \
@@ -114,7 +110,7 @@
 	__dummy; \
 })
 #define write_cr3(x) \
-	__asm__ __volatile__("movl %0,%%cr3": :"r" (x));
+	__asm__ __volatile__("movl %0,%%cr3": :"r" (x))
 
 #define read_cr4() ({ \
 	unsigned int __dummy; \
@@ -123,7 +119,6 @@
 		:"=r" (__dummy)); \
 	__dummy; \
 })
-
 #define read_cr4_safe() ({			      \
 	unsigned int __dummy;			      \
 	/* This could fault if %cr4 does not exist */ \
@@ -135,15 +130,19 @@
 		: "=r" (__dummy): "0" (0));	      \
 	__dummy;				      \
 })
-
 #define write_cr4(x) \
-	__asm__ __volatile__("movl %0,%%cr4": :"r" (x));
+	__asm__ __volatile__("movl %0,%%cr4": :"r" (x))
+
+/*
+ * Clear and set 'TS' bit respectively
+ */
+#define clts() __asm__ __volatile__ ("clts")
 #define stts() write_cr0(8 | read_cr0())
 
 #endif	/* __KERNEL__ */
 
 #define wbinvd() \
-	__asm__ __volatile__ ("wbinvd": : :"memory");
+	__asm__ __volatile__ ("wbinvd": : :"memory")
 
 static inline unsigned long get_limit(unsigned long segment)
 {
@@ -454,8 +453,6 @@
 #define set_mb(var, value) do { var = value; barrier(); } while (0)
 #endif
 
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
-
 #include <linux/irqflags.h>
 
 /*
diff -urN linux-2.6.18-rc1/include/asm-i386/thread_info.h linux-2.6.18-rc2/include/asm-i386/thread_info.h
--- linux-2.6.18-rc1/include/asm-i386/thread_info.h	2006-07-15 22:34:43.537101664 +0000
+++ linux-2.6.18-rc2/include/asm-i386/thread_info.h	2006-07-15 22:34:48.845677900 +0000
@@ -140,6 +140,8 @@
 #define TIF_SECCOMP		8	/* secure computing */
 #define TIF_RESTORE_SIGMASK	9	/* restore signal mask in do_signal() */
 #define TIF_MEMDIE		16
+#define TIF_DEBUG		17	/* uses debug registers */
+#define TIF_IO_BITMAP		18	/* uses I/O bitmap */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
@@ -151,6 +153,8 @@
 #define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
 #define _TIF_SECCOMP		(1<<TIF_SECCOMP)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
+#define _TIF_DEBUG		(1<<TIF_DEBUG)
+#define _TIF_IO_BITMAP		(1<<TIF_IO_BITMAP)
 
 /* work to do on interrupt/exception return */
 #define _TIF_WORK_MASK \
@@ -159,6 +163,9 @@
 /* work to do on any return to u-space */
 #define _TIF_ALLWORK_MASK	(0x0000FFFF & ~_TIF_SECCOMP)
 
+/* flags to check in __switch_to() */
+#define _TIF_WORK_CTXSW (_TIF_DEBUG|_TIF_IO_BITMAP)
+
 /*
  * Thread-synchronous status.
  *
diff -urN linux-2.6.18-rc1/include/asm-ia64/io.h linux-2.6.18-rc2/include/asm-ia64/io.h
--- linux-2.6.18-rc1/include/asm-ia64/io.h	2006-07-15 22:34:43.541102099 +0000
+++ linux-2.6.18-rc2/include/asm-ia64/io.h	2006-07-15 22:34:48.849678335 +0000
@@ -90,7 +90,7 @@
 #define ARCH_HAS_VALID_PHYS_ADDR_RANGE
 extern u64 kern_mem_attribute (unsigned long phys_addr, unsigned long size);
 extern int valid_phys_addr_range (unsigned long addr, size_t count); /* efi.c */
-extern int valid_mmap_phys_addr_range (unsigned long addr, size_t count);
+extern int valid_mmap_phys_addr_range (unsigned long pfn, size_t count);
 
 /*
  * The following two macros are deprecated and scheduled for removal.
diff -urN linux-2.6.18-rc1/include/asm-ia64/system.h linux-2.6.18-rc2/include/asm-ia64/system.h
--- linux-2.6.18-rc1/include/asm-ia64/system.h	2006-07-15 22:34:43.549102967 +0000
+++ linux-2.6.18-rc2/include/asm-ia64/system.h	2006-07-15 22:34:48.857679203 +0000
@@ -98,12 +98,11 @@
 #endif
 
 /*
- * XXX check on these---I suspect what Linus really wants here is
+ * XXX check on this ---I suspect what Linus really wants here is
  * acquire vs release semantics but we can't discuss this stuff with
  * Linus just yet.  Grrr...
  */
 #define set_mb(var, value)	do { (var) = (value); mb(); } while (0)
-#define set_wmb(var, value)	do { (var) = (value); mb(); } while (0)
 
 #define safe_halt()         ia64_pal_halt_light()    /* PAL_HALT_LIGHT */
 
diff -urN linux-2.6.18-rc1/include/asm-m32r/system.h linux-2.6.18-rc2/include/asm-m32r/system.h
--- linux-2.6.18-rc1/include/asm-m32r/system.h	2006-07-15 22:34:43.553103401 +0000
+++ linux-2.6.18-rc2/include/asm-m32r/system.h	2006-07-15 22:34:48.861679637 +0000
@@ -336,7 +336,6 @@
 #endif
 
 #define set_mb(var, value) do { xchg(&var, value); } while (0)
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
 
 #define arch_align_stack(x) (x)
 
diff -urN linux-2.6.18-rc1/include/asm-m68k/system.h linux-2.6.18-rc2/include/asm-m68k/system.h
--- linux-2.6.18-rc1/include/asm-m68k/system.h	2006-07-15 22:34:43.561104270 +0000
+++ linux-2.6.18-rc2/include/asm-m68k/system.h	2006-07-15 22:34:48.869680506 +0000
@@ -80,7 +80,6 @@
 #define wmb()		barrier()
 #define read_barrier_depends()	do { } while(0)
 #define set_mb(var, value)    do { xchg(&var, value); } while (0)
-#define set_wmb(var, value)    do { var = value; wmb(); } while (0)
 
 #define smp_mb()	barrier()
 #define smp_rmb()	barrier()
diff -urN linux-2.6.18-rc1/include/asm-m68knommu/processor.h linux-2.6.18-rc2/include/asm-m68knommu/processor.h
--- linux-2.6.18-rc1/include/asm-m68knommu/processor.h	2006-07-15 22:34:43.573105572 +0000
+++ linux-2.6.18-rc2/include/asm-m68knommu/processor.h	2006-07-15 22:34:48.881681809 +0000
@@ -13,6 +13,7 @@
  */
 #define current_text_addr() ({ __label__ _l; _l: &&_l;})
 
+#include <linux/compiler.h>
 #include <linux/threads.h>
 #include <asm/types.h>
 #include <asm/segment.h>
@@ -137,6 +138,6 @@
 	eip; })
 #define	KSTK_ESP(tsk)	((tsk) == current ? rdusp() : (tsk)->thread.usp)
 
-#define cpu_relax()    do { } while (0)
+#define cpu_relax()    barrier()
 
 #endif
diff -urN linux-2.6.18-rc1/include/asm-m68knommu/system.h linux-2.6.18-rc2/include/asm-m68knommu/system.h
--- linux-2.6.18-rc1/include/asm-m68knommu/system.h	2006-07-15 22:34:43.573105572 +0000
+++ linux-2.6.18-rc2/include/asm-m68knommu/system.h	2006-07-15 22:34:48.881681809 +0000
@@ -106,7 +106,6 @@
 #define wmb()  asm volatile (""   : : :"memory")
 #define set_rmb(var, value)    do { xchg(&var, value); } while (0)
 #define set_mb(var, value)     set_rmb(var, value)
-#define set_wmb(var, value)    do { var = value; wmb(); } while (0)
 
 #ifdef CONFIG_SMP
 #define smp_mb()	mb()
diff -urN linux-2.6.18-rc1/include/asm-m68knommu/uaccess.h linux-2.6.18-rc2/include/asm-m68knommu/uaccess.h
--- linux-2.6.18-rc1/include/asm-m68knommu/uaccess.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-m68knommu/uaccess.h	2006-07-15 22:34:48.881681809 +0000
@@ -93,7 +93,7 @@
 #define get_user(x, ptr)					\
 ({								\
     int __gu_err = 0;						\
-    typeof(*(ptr)) __gu_val = 0;				\
+    typeof(x) __gu_val = 0;					\
     switch (sizeof(*(ptr))) {					\
     case 1:							\
 	__get_user_asm(__gu_err, __gu_val, ptr, b, "=d");	\
@@ -105,23 +105,23 @@
 	__get_user_asm(__gu_err, __gu_val, ptr, l, "=r");	\
 	break;							\
     case 8:							\
-	memcpy(&__gu_val, ptr, sizeof (*(ptr))); \
+	memcpy((void *) &__gu_val, ptr, sizeof (*(ptr)));	\
 	break;							\
     default:							\
 	__gu_val = 0;						\
 	__gu_err = __get_user_bad();				\
 	break;							\
     }								\
-    (x) = __gu_val;						\
+    (x) = (typeof(*(ptr))) __gu_val;				\
     __gu_err;							\
 })
 #define __get_user(x, ptr) get_user(x, ptr)
 
 extern int __get_user_bad(void);
 
-#define __get_user_asm(err,x,ptr,bwl,reg)	\
-	__asm__ ("move" #bwl " %1,%0"			\
-		 : "=d" (x)							\
+#define __get_user_asm(err,x,ptr,bwl,reg)			\
+	__asm__ ("move" #bwl " %1,%0"				\
+		 : "=d" (x)					\
 		 : "m" (*__ptr(ptr)))
 
 #define copy_from_user(to, from, n)		(memcpy(to, from, n), 0)
diff -urN linux-2.6.18-rc1/include/asm-mips/apm.h linux-2.6.18-rc2/include/asm-mips/apm.h
--- linux-2.6.18-rc1/include/asm-mips/apm.h	2006-07-15 22:34:43.573105572 +0000
+++ linux-2.6.18-rc2/include/asm-mips/apm.h	2006-07-15 22:34:48.881681809 +0000
@@ -13,7 +13,6 @@
 #ifndef MIPS_ASM_SA1100_APM_H
 #define MIPS_ASM_SA1100_APM_H
 
-#include <linux/config.h>
 #include <linux/apm_bios.h>
 
 /*
diff -urN linux-2.6.18-rc1/include/asm-mips/atomic.h linux-2.6.18-rc2/include/asm-mips/atomic.h
--- linux-2.6.18-rc1/include/asm-mips/atomic.h	2006-07-15 22:34:43.573105572 +0000
+++ linux-2.6.18-rc2/include/asm-mips/atomic.h	2006-07-15 22:34:48.885682243 +0000
@@ -22,8 +22,8 @@
 #ifndef _ASM_ATOMIC_H
 #define _ASM_ATOMIC_H
 
+#include <linux/irqflags.h>
 #include <asm/cpu-features.h>
-#include <asm/interrupt.h>
 #include <asm/war.h>
 
 typedef struct { volatile int counter; } atomic_t;
diff -urN linux-2.6.18-rc1/include/asm-mips/bitops.h linux-2.6.18-rc2/include/asm-mips/bitops.h
--- linux-2.6.18-rc1/include/asm-mips/bitops.h	2006-07-15 22:34:43.573105572 +0000
+++ linux-2.6.18-rc2/include/asm-mips/bitops.h	2006-07-15 22:34:48.885682243 +0000
@@ -31,7 +31,7 @@
 
 #ifdef __KERNEL__
 
-#include <asm/interrupt.h>
+#include <linux/irqflags.h>
 #include <asm/sgidefs.h>
 #include <asm/war.h>
 
diff -urN linux-2.6.18-rc1/include/asm-mips/cpu-features.h linux-2.6.18-rc2/include/asm-mips/cpu-features.h
--- linux-2.6.18-rc1/include/asm-mips/cpu-features.h	2006-07-15 22:34:43.577106007 +0000
+++ linux-2.6.18-rc2/include/asm-mips/cpu-features.h	2006-07-15 22:34:48.885682243 +0000
@@ -143,12 +143,8 @@
 #define cpu_has_dsp		(cpu_data[0].ases & MIPS_ASE_DSP)
 #endif
 
-#ifdef CONFIG_MIPS_MT
 #ifndef cpu_has_mipsmt
-# define cpu_has_mipsmt		(cpu_data[0].ases & MIPS_ASE_MIPSMT)
-#endif
-#else
-# define cpu_has_mipsmt		0
+#define cpu_has_mipsmt		(cpu_data[0].ases & MIPS_ASE_MIPSMT)
 #endif
 
 #ifdef CONFIG_32BIT
@@ -199,8 +195,8 @@
 # define cpu_has_veic			0
 #endif
 
-#ifndef cpu_has_subset_pcaches
-#define cpu_has_subset_pcaches	(cpu_data[0].options & MIPS_CPU_SUBSET_CACHES)
+#ifndef cpu_has_inclusive_pcaches
+#define cpu_has_inclusive_pcaches	(cpu_data[0].options & MIPS_CPU_INCLUSIVE_CACHES)
 #endif
 
 #ifndef cpu_dcache_line_size
diff -urN linux-2.6.18-rc1/include/asm-mips/cpu.h linux-2.6.18-rc2/include/asm-mips/cpu.h
--- linux-2.6.18-rc1/include/asm-mips/cpu.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-mips/cpu.h	2006-07-15 22:34:48.885682243 +0000
@@ -242,7 +242,7 @@
 #define MIPS_CPU_EJTAG		0x00008000 /* EJTAG exception */
 #define MIPS_CPU_NOFPUEX	0x00010000 /* no FPU exception */
 #define MIPS_CPU_LLSC		0x00020000 /* CPU has ll/sc instructions */
-#define MIPS_CPU_SUBSET_CACHES	0x00040000 /* P-cache subset enforced */
+#define MIPS_CPU_INCLUSIVE_CACHES	0x00040000 /* P-cache subset enforced */
 #define MIPS_CPU_PREFETCH	0x00080000 /* CPU has usable prefetch */
 #define MIPS_CPU_VINT		0x00100000 /* CPU supports MIPSR2 vectored interrupts */
 #define MIPS_CPU_VEIC		0x00200000 /* CPU supports MIPSR2 external interrupt controller mode */
diff -urN linux-2.6.18-rc1/include/asm-mips/inst.h linux-2.6.18-rc2/include/asm-mips/inst.h
--- linux-2.6.18-rc1/include/asm-mips/inst.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-mips/inst.h	2006-07-15 22:34:48.889682677 +0000
@@ -74,7 +74,7 @@
 	ins_op, dinsm_op, dinsu_op, dins_op,
 	bshfl_op = 0x20,
 	dbshfl_op = 0x24,
-	rdhwr_op = 0x3f
+	rdhwr_op = 0x3b
 };
 
 /*
diff -urN linux-2.6.18-rc1/include/asm-mips/interrupt.h linux-2.6.18-rc2/include/asm-mips/interrupt.h
--- linux-2.6.18-rc1/include/asm-mips/interrupt.h	2006-07-15 22:34:43.585106875 +0000
+++ linux-2.6.18-rc2/include/asm-mips/interrupt.h	1970-01-01 00:00:00.000000000 +0000
@@ -1,221 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle
- * Copyright (C) 1996 by Paul M. Antoine
- * Copyright (C) 1999 Silicon Graphics
- * Copyright (C) 2000 MIPS Technologies, Inc.
- */
-#ifndef _ASM_INTERRUPT_H
-#define _ASM_INTERRUPT_H
-
-#include <asm/hazards.h>
-
-__asm__ (
-	"	.macro	local_irq_enable				\n"
-	"	.set	push						\n"
-	"	.set	reorder						\n"
-	"	.set	noat						\n"
-#ifdef CONFIG_MIPS_MT_SMTC
-	"	mfc0	$1, $2, 1	# SMTC - clear TCStatus.IXMT	\n"
-	"	ori	$1, 0x400					\n"
-	"	xori	$1, 0x400					\n"
-	"	mtc0	$1, $2, 1					\n"
-#elif defined(CONFIG_CPU_MIPSR2)
-	"	ei							\n"
-#else
-	"	mfc0	$1,$12						\n"
-	"	ori	$1,0x1f						\n"
-	"	xori	$1,0x1e						\n"
-	"	mtc0	$1,$12						\n"
-#endif
-	"	irq_enable_hazard					\n"
-	"	.set	pop						\n"
-	"	.endm");
-
-static inline void local_irq_enable(void)
-{
-	__asm__ __volatile__(
-		"local_irq_enable"
-		: /* no outputs */
-		: /* no inputs */
-		: "memory");
-}
-
-/*
- * For cli() we have to insert nops to make sure that the new value
- * has actually arrived in the status register before the end of this
- * macro.
- * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
- * no nops at all.
- */
-/*
- * For TX49, operating only IE bit is not enough.
- *
- * If mfc0 $12 follows store and the mfc0 is last instruction of a
- * page and fetching the next instruction causes TLB miss, the result
- * of the mfc0 might wrongly contain EXL bit.
- *
- * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008
- *
- * Workaround: mask EXL bit of the result or place a nop before mfc0.
- */
-__asm__ (
-	"	.macro	local_irq_disable\n"
-	"	.set	push						\n"
-	"	.set	noat						\n"
-#ifdef CONFIG_MIPS_MT_SMTC
-	"	mfc0	$1, $2, 1					\n"
-	"	ori	$1, 0x400					\n"
-	"	.set	noreorder					\n"
-	"	mtc0	$1, $2, 1					\n"
-#elif defined(CONFIG_CPU_MIPSR2)
-	"	di							\n"
-#else
-	"	mfc0	$1,$12						\n"
-	"	ori	$1,0x1f						\n"
-	"	xori	$1,0x1f						\n"
-	"	.set	noreorder					\n"
-	"	mtc0	$1,$12						\n"
-#endif
-	"	irq_disable_hazard					\n"
-	"	.set	pop						\n"
-	"	.endm							\n");
-
-static inline void local_irq_disable(void)
-{
-	__asm__ __volatile__(
-		"local_irq_disable"
-		: /* no outputs */
-		: /* no inputs */
-		: "memory");
-}
-
-__asm__ (
-	"	.macro	local_save_flags flags				\n"
-	"	.set	push						\n"
-	"	.set	reorder						\n"
-#ifdef CONFIG_MIPS_MT_SMTC
-	"	mfc0	\\flags, $2, 1					\n"
-#else
-	"	mfc0	\\flags, $12					\n"
-#endif
-	"	.set	pop						\n"
-	"	.endm							\n");
-
-#define local_save_flags(x)						\
-__asm__ __volatile__(							\
-	"local_save_flags %0"						\
-	: "=r" (x))
-
-__asm__ (
-	"	.macro	local_irq_save result				\n"
-	"	.set	push						\n"
-	"	.set	reorder						\n"
-	"	.set	noat						\n"
-#ifdef CONFIG_MIPS_MT_SMTC
-	"	mfc0	\\result, $2, 1					\n"
-	"	ori	$1, \\result, 0x400				\n"
-	"	.set	noreorder					\n"
-	"	mtc0	$1, $2, 1					\n"
-	"	andi	\\result, \\result, 0x400			\n"
-#elif defined(CONFIG_CPU_MIPSR2)
-	"	di	\\result					\n"
-	"	andi	\\result, 1					\n"
-#else
-	"	mfc0	\\result, $12					\n"
-	"	ori	$1, \\result, 0x1f				\n"
-	"	xori	$1, 0x1f					\n"
-	"	.set	noreorder					\n"
-	"	mtc0	$1, $12						\n"
-#endif
-	"	irq_disable_hazard					\n"
-	"	.set	pop						\n"
-	"	.endm							\n");
-
-#define local_irq_save(x)						\
-__asm__ __volatile__(							\
-	"local_irq_save\t%0"						\
-	: "=r" (x)							\
-	: /* no inputs */						\
-	: "memory")
-
-__asm__ (
-	"	.macro	local_irq_restore flags				\n"
-	"	.set	push						\n"
-	"	.set	noreorder					\n"
-	"	.set	noat						\n"
-#ifdef CONFIG_MIPS_MT_SMTC
-	"mfc0	$1, $2, 1						\n"
-	"andi	\\flags, 0x400						\n"
-	"ori	$1, 0x400						\n"
-	"xori	$1, 0x400						\n"
-	"or	\\flags, $1						\n"
-	"mtc0	\\flags, $2, 1						\n"
-#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
-	/*
-	 * Slow, but doesn't suffer from a relativly unlikely race
-	 * condition we're having since days 1.
-	 */
-	"	beqz	\\flags, 1f					\n"
-	"	 di							\n"
-	"	ei							\n"
-	"1:								\n"
-#elif defined(CONFIG_CPU_MIPSR2)
-	/*
-	 * Fast, dangerous.  Life is fun, life is good.
-	 */
-	"	mfc0	$1, $12						\n"
-	"	ins	$1, \\flags, 0, 1				\n"
-	"	mtc0	$1, $12						\n"
-#else
-	"	mfc0	$1, $12						\n"
-	"	andi	\\flags, 1					\n"
-	"	ori	$1, 0x1f					\n"
-	"	xori	$1, 0x1f					\n"
-	"	or	\\flags, $1					\n"
-	"	mtc0	\\flags, $12					\n"
-#endif
-	"	irq_disable_hazard					\n"
-	"	.set	pop						\n"
-	"	.endm							\n");
-
-#define local_irq_restore(flags)					\
-do {									\
-	unsigned long __tmp1;						\
-									\
-	__asm__ __volatile__(						\
-		"local_irq_restore\t%0"					\
-		: "=r" (__tmp1)						\
-		: "0" (flags)						\
-		: "memory");						\
-} while(0)
-
-static inline int irqs_disabled(void)
-{
-#ifdef CONFIG_MIPS_MT_SMTC
-	/*
-	 * SMTC model uses TCStatus.IXMT to disable interrupts for a thread/CPU
-	 */
-	unsigned long __result;
-
-	__asm__ __volatile__(
-	"	.set	noreorder					\n"
-	"	mfc0	%0, $2, 1					\n"
-	"	andi	%0, 0x400					\n"
-	"	slt	%0, $0, %0					\n"
-	"	.set	reorder						\n"
-	: "=r" (__result));
-
-	return __result;
-#else
-	unsigned long flags;
-	local_save_flags(flags);
-
-	return !(flags & 1);
-#endif
-}
-
-#endif /* _ASM_INTERRUPT_H */
diff -urN linux-2.6.18-rc1/include/asm-mips/irqflags.h linux-2.6.18-rc2/include/asm-mips/irqflags.h
--- linux-2.6.18-rc1/include/asm-mips/irqflags.h	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-mips/irqflags.h	2006-07-15 22:34:48.893683111 +0000
@@ -0,0 +1,225 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle
+ * Copyright (C) 1996 by Paul M. Antoine
+ * Copyright (C) 1999 Silicon Graphics
+ * Copyright (C) 2000 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm/hazards.h>
+
+__asm__ (
+	"	.macro	raw_local_irq_enable				\n"
+	"	.set	push						\n"
+	"	.set	reorder						\n"
+	"	.set	noat						\n"
+#ifdef CONFIG_MIPS_MT_SMTC
+	"	mfc0	$1, $2, 1	# SMTC - clear TCStatus.IXMT	\n"
+	"	ori	$1, 0x400					\n"
+	"	xori	$1, 0x400					\n"
+	"	mtc0	$1, $2, 1					\n"
+#elif defined(CONFIG_CPU_MIPSR2)
+	"	ei							\n"
+#else
+	"	mfc0	$1,$12						\n"
+	"	ori	$1,0x1f						\n"
+	"	xori	$1,0x1e						\n"
+	"	mtc0	$1,$12						\n"
+#endif
+	"	irq_enable_hazard					\n"
+	"	.set	pop						\n"
+	"	.endm");
+
+static inline void raw_local_irq_enable(void)
+{
+	__asm__ __volatile__(
+		"raw_local_irq_enable"
+		: /* no outputs */
+		: /* no inputs */
+		: "memory");
+}
+
+/*
+ * For cli() we have to insert nops to make sure that the new value
+ * has actually arrived in the status register before the end of this
+ * macro.
+ * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
+ * no nops at all.
+ */
+/*
+ * For TX49, operating only IE bit is not enough.
+ *
+ * If mfc0 $12 follows store and the mfc0 is last instruction of a
+ * page and fetching the next instruction causes TLB miss, the result
+ * of the mfc0 might wrongly contain EXL bit.
+ *
+ * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008
+ *
+ * Workaround: mask EXL bit of the result or place a nop before mfc0.
+ */
+__asm__ (
+	"	.macro	raw_local_irq_disable\n"
+	"	.set	push						\n"
+	"	.set	noat						\n"
+#ifdef CONFIG_MIPS_MT_SMTC
+	"	mfc0	$1, $2, 1					\n"
+	"	ori	$1, 0x400					\n"
+	"	.set	noreorder					\n"
+	"	mtc0	$1, $2, 1					\n"
+#elif defined(CONFIG_CPU_MIPSR2)
+	"	di							\n"
+#else
+	"	mfc0	$1,$12						\n"
+	"	ori	$1,0x1f						\n"
+	"	xori	$1,0x1f						\n"
+	"	.set	noreorder					\n"
+	"	mtc0	$1,$12						\n"
+#endif
+	"	irq_disable_hazard					\n"
+	"	.set	pop						\n"
+	"	.endm							\n");
+
+static inline void raw_local_irq_disable(void)
+{
+	__asm__ __volatile__(
+		"raw_local_irq_disable"
+		: /* no outputs */
+		: /* no inputs */
+		: "memory");
+}
+
+__asm__ (
+	"	.macro	raw_local_save_flags flags			\n"
+	"	.set	push						\n"
+	"	.set	reorder						\n"
+#ifdef CONFIG_MIPS_MT_SMTC
+	"	mfc0	\\flags, $2, 1					\n"
+#else
+	"	mfc0	\\flags, $12					\n"
+#endif
+	"	.set	pop						\n"
+	"	.endm							\n");
+
+#define raw_local_save_flags(x)						\
+__asm__ __volatile__(							\
+	"raw_local_save_flags %0"					\
+	: "=r" (x))
+
+__asm__ (
+	"	.macro	raw_local_irq_save result			\n"
+	"	.set	push						\n"
+	"	.set	reorder						\n"
+	"	.set	noat						\n"
+#ifdef CONFIG_MIPS_MT_SMTC
+	"	mfc0	\\result, $2, 1					\n"
+	"	ori	$1, \\result, 0x400				\n"
+	"	.set	noreorder					\n"
+	"	mtc0	$1, $2, 1					\n"
+	"	andi	\\result, \\result, 0x400			\n"
+#elif defined(CONFIG_CPU_MIPSR2)
+	"	di	\\result					\n"
+	"	andi	\\result, 1					\n"
+#else
+	"	mfc0	\\result, $12					\n"
+	"	ori	$1, \\result, 0x1f				\n"
+	"	xori	$1, 0x1f					\n"
+	"	.set	noreorder					\n"
+	"	mtc0	$1, $12						\n"
+#endif
+	"	irq_disable_hazard					\n"
+	"	.set	pop						\n"
+	"	.endm							\n");
+
+#define raw_local_irq_save(x)						\
+__asm__ __volatile__(							\
+	"raw_local_irq_save\t%0"					\
+	: "=r" (x)							\
+	: /* no inputs */						\
+	: "memory")
+
+__asm__ (
+	"	.macro	raw_local_irq_restore flags			\n"
+	"	.set	push						\n"
+	"	.set	noreorder					\n"
+	"	.set	noat						\n"
+#ifdef CONFIG_MIPS_MT_SMTC
+	"mfc0	$1, $2, 1						\n"
+	"andi	\\flags, 0x400						\n"
+	"ori	$1, 0x400						\n"
+	"xori	$1, 0x400						\n"
+	"or	\\flags, $1						\n"
+	"mtc0	\\flags, $2, 1						\n"
+#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
+	/*
+	 * Slow, but doesn't suffer from a relativly unlikely race
+	 * condition we're having since days 1.
+	 */
+	"	beqz	\\flags, 1f					\n"
+	"	 di							\n"
+	"	ei							\n"
+	"1:								\n"
+#elif defined(CONFIG_CPU_MIPSR2)
+	/*
+	 * Fast, dangerous.  Life is fun, life is good.
+	 */
+	"	mfc0	$1, $12						\n"
+	"	ins	$1, \\flags, 0, 1				\n"
+	"	mtc0	$1, $12						\n"
+#else
+	"	mfc0	$1, $12						\n"
+	"	andi	\\flags, 1					\n"
+	"	ori	$1, 0x1f					\n"
+	"	xori	$1, 0x1f					\n"
+	"	or	\\flags, $1					\n"
+	"	mtc0	\\flags, $12					\n"
+#endif
+	"	irq_disable_hazard					\n"
+	"	.set	pop						\n"
+	"	.endm							\n");
+
+#define raw_local_irq_restore(flags)					\
+do {									\
+	unsigned long __tmp1;						\
+									\
+	__asm__ __volatile__(						\
+		"raw_local_irq_restore\t%0"				\
+		: "=r" (__tmp1)						\
+		: "0" (flags)						\
+		: "memory");						\
+} while(0)
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * SMTC model uses TCStatus.IXMT to disable interrupts for a thread/CPU
+	 */
+	return flags & 0x400;
+#else
+	return !(flags & 1);
+#endif
+}
+
+#endif
+
+/*
+ * Do the CPU's IRQ-state tracing from assembly code.
+ */
+#ifdef CONFIG_TRACE_IRQFLAGS
+# define TRACE_IRQS_ON							\
+	jal	trace_hardirqs_on
+# define TRACE_IRQS_OFF							\
+	jal	trace_hardirqs_off
+#else
+# define TRACE_IRQS_ON
+# define TRACE_IRQS_OFF
+#endif
+
+#endif /* _ASM_IRQFLAGS_H */
diff -urN linux-2.6.18-rc1/include/asm-mips/mach-cobalt/cpu-feature-overrides.h linux-2.6.18-rc2/include/asm-mips/mach-cobalt/cpu-feature-overrides.h
--- linux-2.6.18-rc1/include/asm-mips/mach-cobalt/cpu-feature-overrides.h	2006-07-15 22:34:43.589107309 +0000
+++ linux-2.6.18-rc2/include/asm-mips/mach-cobalt/cpu-feature-overrides.h	2006-07-15 22:34:48.897683546 +0000
@@ -27,7 +27,7 @@
 #define cpu_has_mcheck		0
 #define cpu_has_ejtag		0
 
-#define cpu_has_subset_pcaches	0
+#define cpu_has_inclusive_pcaches	0
 #define cpu_dcache_line_size()	32
 #define cpu_icache_line_size()	32
 #define cpu_scache_line_size()	0
diff -urN linux-2.6.18-rc1/include/asm-mips/mach-dec/mc146818rtc.h linux-2.6.18-rc2/include/asm-mips/mach-dec/mc146818rtc.h
--- linux-2.6.18-rc1/include/asm-mips/mach-dec/mc146818rtc.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-mips/mach-dec/mc146818rtc.h	2006-07-15 22:34:48.897683546 +0000
@@ -19,6 +19,8 @@
 
 extern volatile u8 *dec_rtc_base;
 
+#define ARCH_RTC_LOCATION
+
 #define RTC_PORT(x)	CPHYSADDR((long)dec_rtc_base)
 #define RTC_IO_EXTENT	dec_kn_slot_size
 #define RTC_IOMAPPED	0
diff -urN linux-2.6.18-rc1/include/asm-mips/mach-excite/cpu-feature-overrides.h linux-2.6.18-rc2/include/asm-mips/mach-excite/cpu-feature-overrides.h
--- linux-2.6.18-rc1/include/asm-mips/mach-excite/cpu-feature-overrides.h	2006-07-15 22:34:43.589107309 +0000
+++ linux-2.6.18-rc2/include/asm-mips/mach-excite/cpu-feature-overrides.h	2006-07-15 22:34:48.897683546 +0000
@@ -31,7 +31,7 @@
 #define cpu_has_nofpuex		0
 #define cpu_has_64bits		1
 
-#define cpu_has_subset_pcaches	0
+#define cpu_has_inclusive_pcaches	0
 
 #define cpu_dcache_line_size()	32
 #define cpu_icache_line_size()	32
diff -urN linux-2.6.18-rc1/include/asm-mips/mach-excite/excite.h linux-2.6.18-rc2/include/asm-mips/mach-excite/excite.h
--- linux-2.6.18-rc1/include/asm-mips/mach-excite/excite.h	2006-07-15 22:34:43.589107309 +0000
+++ linux-2.6.18-rc2/include/asm-mips/mach-excite/excite.h	2006-07-15 22:34:48.897683546 +0000
@@ -1,7 +1,6 @@
 #ifndef __EXCITE_H__
 #define __EXCITE_H__
 
-#include <linux/config.h>
 #include <linux/init.h>
 #include <asm/addrspace.h>
 #include <asm/types.h>
diff -urN linux-2.6.18-rc1/include/asm-mips/mach-ip27/cpu-feature-overrides.h linux-2.6.18-rc2/include/asm-mips/mach-ip27/cpu-feature-overrides.h
--- linux-2.6.18-rc1/include/asm-mips/mach-ip27/cpu-feature-overrides.h	2006-07-15 22:34:43.589107309 +0000
+++ linux-2.6.18-rc2/include/asm-mips/mach-ip27/cpu-feature-overrides.h	2006-07-15 22:34:48.901683980 +0000
@@ -34,7 +34,7 @@
 #define cpu_has_4kex		1
 #define cpu_has_4k_cache	1
 
-#define cpu_has_subset_pcaches	1
+#define cpu_has_inclusive_pcaches	1
 
 #define cpu_dcache_line_size()	32
 #define cpu_icache_line_size()	64
diff -urN linux-2.6.18-rc1/include/asm-mips/mach-ja/cpu-feature-overrides.h linux-2.6.18-rc2/include/asm-mips/mach-ja/cpu-feature-overrides.h
--- linux-2.6.18-rc1/include/asm-mips/mach-ja/cpu-feature-overrides.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-mips/mach-ja/cpu-feature-overrides.h	2006-07-15 22:34:48.901683980 +0000
@@ -31,7 +31,7 @@
 #define cpu_has_nofpuex		0
 #define cpu_has_64bits		1
 
-#define cpu_has_subset_pcaches	0
+#define cpu_has_inclusive_pcaches	0
 
 #define cpu_dcache_line_size()	32
 #define cpu_icache_line_size()	32
diff -urN linux-2.6.18-rc1/include/asm-mips/mach-mips/cpu-feature-overrides.h linux-2.6.18-rc2/include/asm-mips/mach-mips/cpu-feature-overrides.h
--- linux-2.6.18-rc1/include/asm-mips/mach-mips/cpu-feature-overrides.h	2006-07-15 22:34:43.593107744 +0000
+++ linux-2.6.18-rc2/include/asm-mips/mach-mips/cpu-feature-overrides.h	2006-07-15 22:34:48.905684414 +0000
@@ -39,7 +39,7 @@
 #define cpu_has_nofpuex		0
 /* #define cpu_has_64bits	? */
 /* #define cpu_has_64bit_zero_reg ? */
-/* #define cpu_has_subset_pcaches ? */
+/* #define cpu_has_inclusive_pcaches ? */
 #define cpu_icache_snoops_remote_store 1
 #endif
 
@@ -65,7 +65,7 @@
 #define cpu_has_nofpuex		0
 /* #define cpu_has_64bits	? */
 /* #define cpu_has_64bit_zero_reg ? */
-/* #define cpu_has_subset_pcaches ? */
+/* #define cpu_has_inclusive_pcaches ? */
 #define cpu_icache_snoops_remote_store 1
 #endif
 
diff -urN linux-2.6.18-rc1/include/asm-mips/mach-ocelot3/cpu-feature-overrides.h linux-2.6.18-rc2/include/asm-mips/mach-ocelot3/cpu-feature-overrides.h
--- linux-2.6.18-rc1/include/asm-mips/mach-ocelot3/cpu-feature-overrides.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-mips/mach-ocelot3/cpu-feature-overrides.h	2006-07-15 22:34:48.905684414 +0000
@@ -34,7 +34,7 @@
 #define cpu_has_nofpuex 	0
 #define cpu_has_64bits		1
 
-#define cpu_has_subset_pcaches	0
+#define cpu_has_inclusive_pcaches	0
 
 #define cpu_dcache_line_size()	32
 #define cpu_icache_line_size()	32
diff -urN linux-2.6.18-rc1/include/asm-mips/mach-sibyte/cpu-feature-overrides.h linux-2.6.18-rc2/include/asm-mips/mach-sibyte/cpu-feature-overrides.h
--- linux-2.6.18-rc1/include/asm-mips/mach-sibyte/cpu-feature-overrides.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-mips/mach-sibyte/cpu-feature-overrides.h	2006-07-15 22:34:48.905684414 +0000
@@ -31,7 +31,7 @@
 #define cpu_has_nofpuex		0
 #define cpu_has_64bits		1
 
-#define cpu_has_subset_pcaches	0
+#define cpu_has_inclusive_pcaches	0
 
 #define cpu_dcache_line_size()	32
 #define cpu_icache_line_size()	32
diff -urN linux-2.6.18-rc1/include/asm-mips/mach-sim/cpu-feature-overrides.h linux-2.6.18-rc2/include/asm-mips/mach-sim/cpu-feature-overrides.h
--- linux-2.6.18-rc1/include/asm-mips/mach-sim/cpu-feature-overrides.h	2006-07-15 22:34:43.593107744 +0000
+++ linux-2.6.18-rc2/include/asm-mips/mach-sim/cpu-feature-overrides.h	2006-07-15 22:34:48.905684414 +0000
@@ -34,7 +34,7 @@
 #define cpu_has_nofpuex		0
 /* #define cpu_has_64bits	? */
 /* #define cpu_has_64bit_zero_reg ? */
-/* #define cpu_has_subset_pcaches ? */
+/* #define cpu_has_inclusive_pcaches ? */
 #endif
 
 #ifdef CONFIG_CPU_MIPS64
@@ -59,7 +59,7 @@
 #define cpu_has_nofpuex		0
 /* #define cpu_has_64bits	? */
 /* #define cpu_has_64bit_zero_reg ? */
-/* #define cpu_has_subset_pcaches ? */
+/* #define cpu_has_inclusive_pcaches ? */
 #endif
 
 #endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */
diff -urN linux-2.6.18-rc1/include/asm-mips/mach-yosemite/cpu-feature-overrides.h linux-2.6.18-rc2/include/asm-mips/mach-yosemite/cpu-feature-overrides.h
--- linux-2.6.18-rc1/include/asm-mips/mach-yosemite/cpu-feature-overrides.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-mips/mach-yosemite/cpu-feature-overrides.h	2006-07-15 22:34:48.905684414 +0000
@@ -31,7 +31,7 @@
 #define cpu_has_nofpuex		0
 #define cpu_has_64bits		1
 
-#define cpu_has_subset_pcaches	0
+#define cpu_has_inclusive_pcaches	0
 
 #define cpu_dcache_line_size()	32
 #define cpu_icache_line_size()	32
diff -urN linux-2.6.18-rc1/include/asm-mips/mipsregs.h linux-2.6.18-rc2/include/asm-mips/mipsregs.h
--- linux-2.6.18-rc1/include/asm-mips/mipsregs.h	2006-07-15 22:34:43.593107744 +0000
+++ linux-2.6.18-rc2/include/asm-mips/mipsregs.h	2006-07-15 22:34:48.905684414 +0000
@@ -470,6 +470,8 @@
 
 /* Bits specific to the VR41xx.  */
 #define VR41_CONF_CS		(_ULCAST_(1) << 12)
+#define VR41_CONF_P4K		(_ULCAST_(1) << 13)
+#define VR41_CONF_BP		(_ULCAST_(1) << 16)
 #define VR41_CONF_M16		(_ULCAST_(1) << 20)
 #define VR41_CONF_AD		(_ULCAST_(1) << 23)
 
@@ -1416,7 +1418,7 @@
 
 #else /* SMTC versions that manage MT scheduling */
 
-#include <asm/interrupt.h>
+#include <linux/irqflags.h>
 
 /*
  * This is a duplicate of dmt() in mipsmtregs.h to avoid problems with
diff -urN linux-2.6.18-rc1/include/asm-mips/page.h linux-2.6.18-rc2/include/asm-mips/page.h
--- linux-2.6.18-rc1/include/asm-mips/page.h	2006-07-15 22:34:43.597108178 +0000
+++ linux-2.6.18-rc2/include/asm-mips/page.h	2006-07-15 22:34:48.905684414 +0000
@@ -138,16 +138,14 @@
 
 #define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
 
-#ifndef CONFIG_SPARSEMEM
-#ifndef CONFIG_NEED_MULTIPLE_NODES
-#define pfn_valid(pfn)		((pfn) < max_mapnr)
-#endif
-#endif
-
 #ifdef CONFIG_FLATMEM
 
 #define pfn_valid(pfn)		((pfn) < max_mapnr)
 
+#elif defined(CONFIG_SPARSEMEM)
+
+/* pfn_valid is defined in linux/mmzone.h */
+
 #elif defined(CONFIG_NEED_MULTIPLE_NODES)
 
 #define pfn_valid(pfn)							\
@@ -159,8 +157,6 @@
 	            : 0);						\
 })
 
-#else
-#error Provide a definition of pfn_valid
 #endif
 
 #define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
diff -urN linux-2.6.18-rc1/include/asm-mips/system.h linux-2.6.18-rc2/include/asm-mips/system.h
--- linux-2.6.18-rc1/include/asm-mips/system.h	2006-07-15 22:34:43.605109046 +0000
+++ linux-2.6.18-rc2/include/asm-mips/system.h	2006-07-15 22:34:48.917685717 +0000
@@ -13,13 +13,13 @@
 #define _ASM_SYSTEM_H
 
 #include <linux/types.h>
+#include <linux/irqflags.h>
 
 #include <asm/addrspace.h>
 #include <asm/cpu-features.h>
 #include <asm/dsp.h>
 #include <asm/ptrace.h>
 #include <asm/war.h>
-#include <asm/interrupt.h>
 
 /*
  * read_barrier_depends - Flush all pending reads that subsequents reads
@@ -143,9 +143,6 @@
 #define set_mb(var, value) \
 do { var = value; mb(); } while (0)
 
-#define set_wmb(var, value) \
-do { var = value; wmb(); } while (0)
-
 /*
  * switch_to(n) should switch tasks to task nr n, first
  * checking that n isn't the current task, in which case it does nothing.
diff -urN linux-2.6.18-rc1/include/asm-mips/time.h linux-2.6.18-rc2/include/asm-mips/time.h
--- linux-2.6.18-rc1/include/asm-mips/time.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-mips/time.h	2006-07-15 22:34:48.917685717 +0000
@@ -83,11 +83,11 @@
 /*
  * board specific routines required by time_init().
  * board_time_init is defaulted to NULL and can remain so.
- * board_timer_setup must be setup properly in machine setup routine.
+ * plat_timer_setup must be setup properly in machine setup routine.
  */
 struct irqaction;
 extern void (*board_time_init)(void);
-extern void (*board_timer_setup)(struct irqaction *irq);
+extern void plat_timer_setup(struct irqaction *irq);
 
 /*
  * mips_hpt_frequency - must be set if you intend to use an R4k-compatible
diff -urN linux-2.6.18-rc1/include/asm-mips/unistd.h linux-2.6.18-rc2/include/asm-mips/unistd.h
--- linux-2.6.18-rc1/include/asm-mips/unistd.h	2006-07-15 22:34:43.605109046 +0000
+++ linux-2.6.18-rc2/include/asm-mips/unistd.h	2006-07-15 22:34:48.917685717 +0000
@@ -327,16 +327,18 @@
 #define __NR_splice			(__NR_Linux + 304)
 #define __NR_sync_file_range		(__NR_Linux + 305)
 #define __NR_tee			(__NR_Linux + 306)
+#define __NR_vmsplice			(__NR_Linux + 307)
+#define __NR_move_pages			(__NR_Linux + 308)
 
 /*
  * Offset of the last Linux o32 flavoured syscall
  */
-#define __NR_Linux_syscalls		306
+#define __NR_Linux_syscalls		308
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
 #define __NR_O32_Linux			4000
-#define __NR_O32_Linux_syscalls		306
+#define __NR_O32_Linux_syscalls		308
 
 #if _MIPS_SIM == _MIPS_SIM_ABI64
 
@@ -610,16 +612,18 @@
 #define __NR_splice			(__NR_Linux + 263)
 #define __NR_sync_file_range		(__NR_Linux + 264)
 #define __NR_tee			(__NR_Linux + 265)
+#define __NR_vmsplice			(__NR_Linux + 266)
+#define __NR_move_pages			(__NR_Linux + 267)
 
 /*
  * Offset of the last Linux 64-bit flavoured syscall
  */
-#define __NR_Linux_syscalls		265
+#define __NR_Linux_syscalls		267
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
 
 #define __NR_64_Linux			5000
-#define __NR_64_Linux_syscalls		265
+#define __NR_64_Linux_syscalls		267
 
 #if _MIPS_SIM == _MIPS_SIM_NABI32
 
@@ -897,16 +901,18 @@
 #define __NR_splice			(__NR_Linux + 267)
 #define __NR_sync_file_range		(__NR_Linux + 268)
 #define __NR_tee			(__NR_Linux + 269)
+#define __NR_vmsplice			(__NR_Linux + 270)
+#define __NR_move_pages			(__NR_Linux + 271)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		269
+#define __NR_Linux_syscalls		271
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		269
+#define __NR_N32_Linux_syscalls		271
 
 #ifdef __KERNEL__
 
diff -urN linux-2.6.18-rc1/include/asm-mips/vr41xx/capcella.h linux-2.6.18-rc2/include/asm-mips/vr41xx/capcella.h
--- linux-2.6.18-rc1/include/asm-mips/vr41xx/capcella.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-mips/vr41xx/capcella.h	2006-07-15 22:34:48.917685717 +0000
@@ -20,7 +20,7 @@
 #ifndef __ZAO_CAPCELLA_H
 #define __ZAO_CAPCELLA_H
 
-#include <asm/vr41xx/vr41xx.h>
+#include <asm/vr41xx/irq.h>
 
 /*
  * General-Purpose I/O Pin Number
diff -urN linux-2.6.18-rc1/include/asm-mips/vr41xx/cmbvr4133.h linux-2.6.18-rc2/include/asm-mips/vr41xx/cmbvr4133.h
--- linux-2.6.18-rc1/include/asm-mips/vr41xx/cmbvr4133.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-mips/vr41xx/cmbvr4133.h	2006-07-15 22:34:48.917685717 +0000
@@ -15,8 +15,7 @@
 #ifndef __NEC_CMBVR4133_H
 #define __NEC_CMBVR4133_H
 
-#include <asm/addrspace.h>
-#include <asm/vr41xx/vr41xx.h>
+#include <asm/vr41xx/irq.h>
 
 /*
  * General-Purpose I/O Pin Number
@@ -55,7 +54,4 @@
 #define IDE_SECONDARY_IRQ		I8259_IRQ(15)
 #define I8259_IRQ_LAST			IDE_SECONDARY_IRQ
 
-#define RTC_PORT(x)	(0xaf000100 + (x))
-#define RTC_IO_EXTENT	0x140
-
 #endif /* __NEC_CMBVR4133_H */
diff -urN linux-2.6.18-rc1/include/asm-mips/vr41xx/e55.h linux-2.6.18-rc2/include/asm-mips/vr41xx/e55.h
--- linux-2.6.18-rc1/include/asm-mips/vr41xx/e55.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-mips/vr41xx/e55.h	1970-01-01 00:00:00.000000000 +0000
@@ -1,43 +0,0 @@
-/*
- *  e55.h, Include file for CASIO CASSIOPEIA E-10/15/55/65.
- *
- *  Copyright (C) 2002-2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __CASIO_E55_H
-#define __CASIO_E55_H
-
-#include <asm/addrspace.h>
-#include <asm/vr41xx/vr41xx.h>
-
-/*
- * Board specific address mapping
- */
-#define VR41XX_ISA_MEM_BASE		0x10000000
-#define VR41XX_ISA_MEM_SIZE		0x04000000
-
-/* VR41XX_ISA_IO_BASE includes offset from real base. */
-#define VR41XX_ISA_IO_BASE		0x1400c000
-#define VR41XX_ISA_IO_SIZE		0x03ff4000
-
-#define ISA_BUS_IO_BASE			0
-#define ISA_BUS_IO_SIZE			VR41XX_ISA_IO_SIZE
-
-#define IO_PORT_BASE			KSEG1ADDR(VR41XX_ISA_IO_BASE)
-#define IO_PORT_RESOURCE_START		ISA_BUS_IO_BASE
-#define IO_PORT_RESOURCE_END		(ISA_BUS_IO_BASE + ISA_BUS_IO_SIZE - 1)
-
-#endif /* __CASIO_E55_H */
diff -urN linux-2.6.18-rc1/include/asm-mips/vr41xx/irq.h linux-2.6.18-rc2/include/asm-mips/vr41xx/irq.h
--- linux-2.6.18-rc1/include/asm-mips/vr41xx/irq.h	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-mips/vr41xx/irq.h	2006-07-15 22:34:48.917685717 +0000
@@ -0,0 +1,101 @@
+/*
+ * include/asm-mips/vr41xx/irq.h
+ *
+ * Interrupt numbers for NEC VR4100 series.
+ *
+ * Copyright (C) 1999 Michael Klar
+ * Copyright (C) 2001, 2002 Paul Mundt
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ * Copyright (C) 2002 TimeSys Corp.
+ * Copyright (C) 2003-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __NEC_VR41XX_IRQ_H
+#define __NEC_VR41XX_IRQ_H
+
+/*
+ * CPU core Interrupt Numbers
+ */
+#define MIPS_CPU_IRQ_BASE	0
+#define MIPS_CPU_IRQ(x)		(MIPS_CPU_IRQ_BASE + (x))
+#define MIPS_SOFTINT0_IRQ	MIPS_CPU_IRQ(0)
+#define MIPS_SOFTINT1_IRQ	MIPS_CPU_IRQ(1)
+#define INT0_IRQ		MIPS_CPU_IRQ(2)
+#define INT1_IRQ		MIPS_CPU_IRQ(3)
+#define INT2_IRQ		MIPS_CPU_IRQ(4)
+#define INT3_IRQ		MIPS_CPU_IRQ(5)
+#define INT4_IRQ		MIPS_CPU_IRQ(6)
+#define TIMER_IRQ		MIPS_CPU_IRQ(7)
+
+/*
+ * SYINT1 Interrupt Numbers
+ */
+#define SYSINT1_IRQ_BASE	8
+#define SYSINT1_IRQ(x)		(SYSINT1_IRQ_BASE + (x))
+#define BATTRY_IRQ		SYSINT1_IRQ(0)
+#define POWER_IRQ		SYSINT1_IRQ(1)
+#define RTCLONG1_IRQ		SYSINT1_IRQ(2)
+#define ELAPSEDTIME_IRQ		SYSINT1_IRQ(3)
+/* RFU */
+#define PIU_IRQ			SYSINT1_IRQ(5)
+#define AIU_IRQ			SYSINT1_IRQ(6)
+#define KIU_IRQ			SYSINT1_IRQ(7)
+#define GIUINT_IRQ		SYSINT1_IRQ(8)
+#define SIU_IRQ			SYSINT1_IRQ(9)
+#define BUSERR_IRQ		SYSINT1_IRQ(10)
+#define SOFTINT_IRQ		SYSINT1_IRQ(11)
+#define CLKRUN_IRQ		SYSINT1_IRQ(12)
+#define DOZEPIU_IRQ		SYSINT1_IRQ(13)
+#define SYSINT1_IRQ_LAST	DOZEPIU_IRQ
+
+/*
+ * SYSINT2 Interrupt Numbers
+ */
+#define SYSINT2_IRQ_BASE	24
+#define SYSINT2_IRQ(x)		(SYSINT2_IRQ_BASE + (x))
+#define RTCLONG2_IRQ		SYSINT2_IRQ(0)
+#define LED_IRQ			SYSINT2_IRQ(1)
+#define HSP_IRQ			SYSINT2_IRQ(2)
+#define TCLOCK_IRQ		SYSINT2_IRQ(3)
+#define FIR_IRQ			SYSINT2_IRQ(4)
+#define CEU_IRQ			SYSINT2_IRQ(4)	/* same number as FIR_IRQ */
+#define DSIU_IRQ		SYSINT2_IRQ(5)
+#define PCI_IRQ			SYSINT2_IRQ(6)
+#define SCU_IRQ			SYSINT2_IRQ(7)
+#define CSI_IRQ			SYSINT2_IRQ(8)
+#define BCU_IRQ			SYSINT2_IRQ(9)
+#define ETHERNET_IRQ		SYSINT2_IRQ(10)
+#define SYSINT2_IRQ_LAST	ETHERNET_IRQ
+
+/*
+ * GIU Interrupt Numbers
+ */
+#define GIU_IRQ_BASE		40
+#define GIU_IRQ(x)		(GIU_IRQ_BASE + (x))	/* IRQ 40-71 */
+#define GIU_IRQ_LAST		GIU_IRQ(31)
+
+/*
+ * VRC4173 Interrupt Numbers
+ */
+#define VRC4173_IRQ_BASE	72
+#define VRC4173_IRQ(x)		(VRC4173_IRQ_BASE + (x))
+#define VRC4173_USB_IRQ		VRC4173_IRQ(0)
+#define VRC4173_PCMCIA2_IRQ	VRC4173_IRQ(1)
+#define VRC4173_PCMCIA1_IRQ	VRC4173_IRQ(2)
+#define VRC4173_PS2CH2_IRQ	VRC4173_IRQ(3)
+#define VRC4173_PS2CH1_IRQ	VRC4173_IRQ(4)
+#define VRC4173_PIU_IRQ		VRC4173_IRQ(5)
+#define VRC4173_AIU_IRQ		VRC4173_IRQ(6)
+#define VRC4173_KIU_IRQ		VRC4173_IRQ(7)
+#define VRC4173_GIU_IRQ		VRC4173_IRQ(8)
+#define VRC4173_AC97_IRQ	VRC4173_IRQ(9)
+#define VRC4173_AC97INT1_IRQ	VRC4173_IRQ(10)
+/* RFU */
+#define VRC4173_DOZEPIU_IRQ	VRC4173_IRQ(13)
+#define VRC4173_IRQ_LAST	VRC4173_DOZEPIU_IRQ
+
+#endif /* __NEC_VR41XX_IRQ_H */
diff -urN linux-2.6.18-rc1/include/asm-mips/vr41xx/mpc30x.h linux-2.6.18-rc2/include/asm-mips/vr41xx/mpc30x.h
--- linux-2.6.18-rc1/include/asm-mips/vr41xx/mpc30x.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-mips/vr41xx/mpc30x.h	2006-07-15 22:34:48.921686151 +0000
@@ -20,7 +20,7 @@
 #ifndef __VICTOR_MPC30X_H
 #define __VICTOR_MPC30X_H
 
-#include <asm/vr41xx/vr41xx.h>
+#include <asm/vr41xx/irq.h>
 
 /*
  * General-Purpose I/O Pin Number
diff -urN linux-2.6.18-rc1/include/asm-mips/vr41xx/tb0219.h linux-2.6.18-rc2/include/asm-mips/vr41xx/tb0219.h
--- linux-2.6.18-rc1/include/asm-mips/vr41xx/tb0219.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-mips/vr41xx/tb0219.h	2006-07-15 22:34:48.921686151 +0000
@@ -23,7 +23,7 @@
 #ifndef __TANBAC_TB0219_H
 #define __TANBAC_TB0219_H
 
-#include <asm/vr41xx/vr41xx.h>
+#include <asm/vr41xx/irq.h>
 
 /*
  * General-Purpose I/O Pin Number
diff -urN linux-2.6.18-rc1/include/asm-mips/vr41xx/tb0226.h linux-2.6.18-rc2/include/asm-mips/vr41xx/tb0226.h
--- linux-2.6.18-rc1/include/asm-mips/vr41xx/tb0226.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-mips/vr41xx/tb0226.h	2006-07-15 22:34:48.921686151 +0000
@@ -20,7 +20,7 @@
 #ifndef __TANBAC_TB0226_H
 #define __TANBAC_TB0226_H
 
-#include <asm/vr41xx/vr41xx.h>
+#include <asm/vr41xx/irq.h>
 
 /*
  * General-Purpose I/O Pin Number
diff -urN linux-2.6.18-rc1/include/asm-mips/vr41xx/tb0287.h linux-2.6.18-rc2/include/asm-mips/vr41xx/tb0287.h
--- linux-2.6.18-rc1/include/asm-mips/vr41xx/tb0287.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-mips/vr41xx/tb0287.h	2006-07-15 22:34:48.921686151 +0000
@@ -22,7 +22,7 @@
 #ifndef __TANBAC_TB0287_H
 #define __TANBAC_TB0287_H
 
-#include <asm/vr41xx/vr41xx.h>
+#include <asm/vr41xx/irq.h>
 
 /*
  * General-Purpose I/O Pin Number
diff -urN linux-2.6.18-rc1/include/asm-mips/vr41xx/vr41xx.h linux-2.6.18-rc2/include/asm-mips/vr41xx/vr41xx.h
--- linux-2.6.18-rc1/include/asm-mips/vr41xx/vr41xx.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-mips/vr41xx/vr41xx.h	2006-07-15 22:34:48.921686151 +0000
@@ -74,59 +74,6 @@
 /*
  * Interrupt Control Unit
  */
-/* CPU core Interrupt Numbers */
-#define MIPS_CPU_IRQ_BASE	0
-#define MIPS_CPU_IRQ(x)		(MIPS_CPU_IRQ_BASE + (x))
-#define MIPS_SOFTINT0_IRQ	MIPS_CPU_IRQ(0)
-#define MIPS_SOFTINT1_IRQ	MIPS_CPU_IRQ(1)
-#define INT0_IRQ		MIPS_CPU_IRQ(2)
-#define INT1_IRQ		MIPS_CPU_IRQ(3)
-#define INT2_IRQ		MIPS_CPU_IRQ(4)
-#define INT3_IRQ		MIPS_CPU_IRQ(5)
-#define INT4_IRQ		MIPS_CPU_IRQ(6)
-#define TIMER_IRQ		MIPS_CPU_IRQ(7)
-
-/* SYINT1 Interrupt Numbers */
-#define SYSINT1_IRQ_BASE	8
-#define SYSINT1_IRQ(x)		(SYSINT1_IRQ_BASE + (x))
-#define BATTRY_IRQ		SYSINT1_IRQ(0)
-#define POWER_IRQ		SYSINT1_IRQ(1)
-#define RTCLONG1_IRQ		SYSINT1_IRQ(2)
-#define ELAPSEDTIME_IRQ		SYSINT1_IRQ(3)
-/* RFU */
-#define PIU_IRQ			SYSINT1_IRQ(5)
-#define AIU_IRQ			SYSINT1_IRQ(6)
-#define KIU_IRQ			SYSINT1_IRQ(7)
-#define GIUINT_IRQ		SYSINT1_IRQ(8)
-#define SIU_IRQ			SYSINT1_IRQ(9)
-#define BUSERR_IRQ		SYSINT1_IRQ(10)
-#define SOFTINT_IRQ		SYSINT1_IRQ(11)
-#define CLKRUN_IRQ		SYSINT1_IRQ(12)
-#define DOZEPIU_IRQ		SYSINT1_IRQ(13)
-#define SYSINT1_IRQ_LAST	DOZEPIU_IRQ
-
-/* SYSINT2 Interrupt Numbers */
-#define SYSINT2_IRQ_BASE	24
-#define SYSINT2_IRQ(x)		(SYSINT2_IRQ_BASE + (x))
-#define RTCLONG2_IRQ		SYSINT2_IRQ(0)
-#define LED_IRQ			SYSINT2_IRQ(1)
-#define HSP_IRQ			SYSINT2_IRQ(2)
-#define TCLOCK_IRQ		SYSINT2_IRQ(3)
-#define FIR_IRQ			SYSINT2_IRQ(4)
-#define CEU_IRQ			SYSINT2_IRQ(4)	/* same number as FIR_IRQ */
-#define DSIU_IRQ		SYSINT2_IRQ(5)
-#define PCI_IRQ			SYSINT2_IRQ(6)
-#define SCU_IRQ			SYSINT2_IRQ(7)
-#define CSI_IRQ			SYSINT2_IRQ(8)
-#define BCU_IRQ			SYSINT2_IRQ(9)
-#define ETHERNET_IRQ		SYSINT2_IRQ(10)
-#define SYSINT2_IRQ_LAST	ETHERNET_IRQ
-
-/* GIU Interrupt Numbers */
-#define GIU_IRQ_BASE		40
-#define GIU_IRQ(x)		(GIU_IRQ_BASE + (x))	/* IRQ 40-71 */
-#define GIU_IRQ_LAST		GIU_IRQ(31)
-
 extern int vr41xx_set_intassign(unsigned int irq, unsigned char intassign);
 extern int cascade_irq(unsigned int irq, int (*get_irq)(unsigned int, struct pt_regs *));
 
diff -urN linux-2.6.18-rc1/include/asm-mips/vr41xx/vrc4173.h linux-2.6.18-rc2/include/asm-mips/vr41xx/vrc4173.h
--- linux-2.6.18-rc1/include/asm-mips/vr41xx/vrc4173.h	2006-07-15 22:34:43.605109046 +0000
+++ linux-2.6.18-rc2/include/asm-mips/vr41xx/vrc4173.h	1970-01-01 00:00:00.000000000 +0000
@@ -1,221 +0,0 @@
-/*
- *  vrc4173.h, Include file for NEC VRC4173.
- *
- *  Copyright (C) 2000  Michael R. McDonald
- *  Copyright (C) 2001-2003 Montavista Software Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com>
- *  Copyright (C) 2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
- *  Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __NEC_VRC4173_H
-#define __NEC_VRC4173_H
-
-#include <asm/io.h>
-
-/*
- * Interrupt Number
- */
-#define VRC4173_IRQ_BASE	72
-#define VRC4173_IRQ(x)		(VRC4173_IRQ_BASE + (x))
-#define VRC4173_USB_IRQ		VRC4173_IRQ(0)
-#define VRC4173_PCMCIA2_IRQ	VRC4173_IRQ(1)
-#define VRC4173_PCMCIA1_IRQ	VRC4173_IRQ(2)
-#define VRC4173_PS2CH2_IRQ	VRC4173_IRQ(3)
-#define VRC4173_PS2CH1_IRQ	VRC4173_IRQ(4)
-#define VRC4173_PIU_IRQ		VRC4173_IRQ(5)
-#define VRC4173_AIU_IRQ		VRC4173_IRQ(6)
-#define VRC4173_KIU_IRQ		VRC4173_IRQ(7)
-#define VRC4173_GIU_IRQ		VRC4173_IRQ(8)
-#define VRC4173_AC97_IRQ	VRC4173_IRQ(9)
-#define VRC4173_AC97INT1_IRQ	VRC4173_IRQ(10)
-/* RFU */
-#define VRC4173_DOZEPIU_IRQ	VRC4173_IRQ(13)
-#define VRC4173_IRQ_LAST	VRC4173_DOZEPIU_IRQ
-
-/*
- * PCI I/O accesses
- */
-#ifdef CONFIG_VRC4173
-
-extern unsigned long vrc4173_io_offset;
-
-#define set_vrc4173_io_offset(offset)	do { vrc4173_io_offset = (offset); } while (0)
-
-#define vrc4173_outb(val,port)		outb((val), vrc4173_io_offset+(port))
-#define vrc4173_outw(val,port)		outw((val), vrc4173_io_offset+(port))
-#define vrc4173_outl(val,port)		outl((val), vrc4173_io_offset+(port))
-#define vrc4173_outb_p(val,port)	outb_p((val), vrc4173_io_offset+(port))
-#define vrc4173_outw_p(val,port)	outw_p((val), vrc4173_io_offset+(port))
-#define vrc4173_outl_p(val,port)	outl_p((val), vrc4173_io_offset+(port))
-
-#define vrc4173_inb(port)		inb(vrc4173_io_offset+(port))
-#define vrc4173_inw(port)		inw(vrc4173_io_offset+(port))
-#define vrc4173_inl(port)		inl(vrc4173_io_offset+(port))
-#define vrc4173_inb_p(port)		inb_p(vrc4173_io_offset+(port))
-#define vrc4173_inw_p(port)		inw_p(vrc4173_io_offset+(port))
-#define vrc4173_inl_p(port)		inl_p(vrc4173_io_offset+(port))
-
-#define vrc4173_outsb(port,addr,count)	outsb(vrc4173_io_offset+(port),(addr),(count))
-#define vrc4173_outsw(port,addr,count)	outsw(vrc4173_io_offset+(port),(addr),(count))
-#define vrc4173_outsl(port,addr,count)	outsl(vrc4173_io_offset+(port),(addr),(count))
-
-#define vrc4173_insb(port,addr,count)	insb(vrc4173_io_offset+(port),(addr),(count))
-#define vrc4173_insw(port,addr,count)	insw(vrc4173_io_offset+(port),(addr),(count))
-#define vrc4173_insl(port,addr,count)	insl(vrc4173_io_offset+(port),(addr),(count))
-
-#else
-
-#define set_vrc4173_io_offset(offset)	do {} while (0)
-
-#define vrc4173_outb(val,port)		do {} while (0)
-#define vrc4173_outw(val,port)		do {} while (0)
-#define vrc4173_outl(val,port)		do {} while (0)
-#define vrc4173_outb_p(val,port)	do {} while (0)
-#define vrc4173_outw_p(val,port)	do {} while (0)
-#define vrc4173_outl_p(val,port)	do {} while (0)
-
-#define vrc4173_inb(port)		0
-#define vrc4173_inw(port)		0
-#define vrc4173_inl(port)		0
-#define vrc4173_inb_p(port)		0
-#define vrc4173_inw_p(port)		0
-#define vrc4173_inl_p(port)		0
-
-#define vrc4173_outsb(port,addr,count)	do {} while (0)
-#define vrc4173_outsw(port,addr,count)	do {} while (0)
-#define vrc4173_outsl(port,addr,count)	do {} while (0)
-
-#define vrc4173_insb(port,addr,count)	do {} while (0)
-#define vrc4173_insw(port,addr,count)	do {} while (0)
-#define vrc4173_insl(port,addr,count)	do {} while (0)
-
-#endif
-
-/*
- * Clock Mask Unit
- */
-typedef enum vrc4173_clock {
-	VRC4173_PIU_CLOCK,
-	VRC4173_KIU_CLOCK,
-	VRC4173_AIU_CLOCK,
-	VRC4173_PS2_CH1_CLOCK,
-	VRC4173_PS2_CH2_CLOCK,
-	VRC4173_USBU_PCI_CLOCK,
-	VRC4173_CARDU1_PCI_CLOCK,
-	VRC4173_CARDU2_PCI_CLOCK,
-	VRC4173_AC97U_PCI_CLOCK,
-	VRC4173_USBU_48MHz_CLOCK,
-	VRC4173_EXT_48MHz_CLOCK,
-	VRC4173_48MHz_CLOCK,
-} vrc4173_clock_t;
-
-#ifdef CONFIG_VRC4173
-
-extern void vrc4173_supply_clock(vrc4173_clock_t clock);
-extern void vrc4173_mask_clock(vrc4173_clock_t clock);
-
-#else
-
-static inline void vrc4173_supply_clock(vrc4173_clock_t clock) {}
-static inline void vrc4173_mask_clock(vrc4173_clock_t clock) {}
-
-#endif
-
-/*
- * Interupt Control Unit
- */
-
-#define VRC4173_PIUINT_COMMAND		0x0040
-#define VRC4173_PIUINT_DATA		0x0020
-#define VRC4173_PIUINT_PAGE1		0x0010
-#define VRC4173_PIUINT_PAGE0		0x0008
-#define VRC4173_PIUINT_DATALOST		0x0004
-#define VRC4173_PIUINT_STATUSCHANGE	0x0001
-
-#ifdef CONFIG_VRC4173
-
-extern void vrc4173_enable_piuint(uint16_t mask);
-extern void vrc4173_disable_piuint(uint16_t mask);
-
-#else
-
-static inline void vrc4173_enable_piuint(uint16_t mask) {}
-static inline void vrc4173_disable_piuint(uint16_t mask) {}
-
-#endif
-
-#define VRC4173_AIUINT_INPUT_DMAEND	0x0800
-#define VRC4173_AIUINT_INPUT_DMAHALT	0x0400
-#define VRC4173_AIUINT_INPUT_DATALOST	0x0200
-#define VRC4173_AIUINT_INPUT_DATA	0x0100
-#define VRC4173_AIUINT_OUTPUT_DMAEND	0x0008
-#define VRC4173_AIUINT_OUTPUT_DMAHALT	0x0004
-#define VRC4173_AIUINT_OUTPUT_NODATA	0x0002
-
-#ifdef CONFIG_VRC4173
-
-extern void vrc4173_enable_aiuint(uint16_t mask);
-extern void vrc4173_disable_aiuint(uint16_t mask);
-
-#else
-
-static inline void vrc4173_enable_aiuint(uint16_t mask) {}
-static inline void vrc4173_disable_aiuint(uint16_t mask) {}
-
-#endif
-
-#define VRC4173_KIUINT_DATALOST		0x0004
-#define VRC4173_KIUINT_DATAREADY	0x0002
-#define VRC4173_KIUINT_SCAN		0x0001
-
-#ifdef CONFIG_VRC4173
-
-extern void vrc4173_enable_kiuint(uint16_t mask);
-extern void vrc4173_disable_kiuint(uint16_t mask);
-
-#else
-
-static inline void vrc4173_enable_kiuint(uint16_t mask) {}
-static inline void vrc4173_disable_kiuint(uint16_t mask) {}
-
-#endif
-
-/*
- * General-Purpose I/O Unit
- */
-typedef enum vrc4173_function {
-	PS2_CHANNEL1,
-	PS2_CHANNEL2,
-	TOUCHPANEL,
-	KEYBOARD_8SCANLINES,
-	KEYBOARD_10SCANLINES,
-	KEYBOARD_12SCANLINES,
-	GPIO_0_15PINS,
-	GPIO_16_20PINS,
-} vrc4173_function_t;
-
-#ifdef CONFIG_VRC4173
-
-extern void vrc4173_select_function(vrc4173_function_t function);
-
-#else
-
-static inline void vrc4173_select_function(vrc4173_function_t function) {}
-
-#endif
-
-#endif /* __NEC_VRC4173_H */
diff -urN linux-2.6.18-rc1/include/asm-mips/vr41xx/workpad.h linux-2.6.18-rc2/include/asm-mips/vr41xx/workpad.h
--- linux-2.6.18-rc1/include/asm-mips/vr41xx/workpad.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-mips/vr41xx/workpad.h	1970-01-01 00:00:00.000000000 +0000
@@ -1,43 +0,0 @@
-/*
- *  workpad.h, Include file for IBM WorkPad z50.
- *
- *  Copyright (C) 2002-2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __IBM_WORKPAD_H
-#define __IBM_WORKPAD_H
-
-#include <asm/addrspace.h>
-#include <asm/vr41xx/vr41xx.h>
-
-/*
- * Board specific address mapping
- */
-#define VR41XX_ISA_MEM_BASE		0x10000000
-#define VR41XX_ISA_MEM_SIZE		0x04000000
-
-/* VR41XX_ISA_IO_BASE includes offset from real base. */
-#define VR41XX_ISA_IO_BASE		0x15000000
-#define VR41XX_ISA_IO_SIZE		0x03000000
-
-#define ISA_BUS_IO_BASE			0
-#define ISA_BUS_IO_SIZE			VR41XX_ISA_IO_SIZE
-
-#define IO_PORT_BASE			KSEG1ADDR(VR41XX_ISA_IO_BASE)
-#define IO_PORT_RESOURCE_START		ISA_BUS_IO_BASE
-#define IO_PORT_RESOURCE_END		(ISA_BUS_IO_BASE + ISA_BUS_IO_SIZE - 1)
-
-#endif /* __IBM_WORKPAD_H */
diff -urN linux-2.6.18-rc1/include/asm-parisc/system.h linux-2.6.18-rc2/include/asm-parisc/system.h
--- linux-2.6.18-rc1/include/asm-parisc/system.h	2006-07-15 22:34:43.609109481 +0000
+++ linux-2.6.18-rc2/include/asm-parisc/system.h	2006-07-15 22:34:48.925686585 +0000
@@ -143,8 +143,6 @@
 #define read_barrier_depends()		do { } while(0)
 
 #define set_mb(var, value)		do { var = value; mb(); } while (0)
-#define set_wmb(var, value)		do { var = value; wmb(); } while (0)
-
 
 #ifndef CONFIG_PA20
 /* Because kmalloc only guarantees 8-byte alignment for kmalloc'd data,
diff -urN linux-2.6.18-rc1/include/asm-powerpc/atomic.h linux-2.6.18-rc2/include/asm-powerpc/atomic.h
--- linux-2.6.18-rc1/include/asm-powerpc/atomic.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-powerpc/atomic.h	2006-07-15 22:34:48.925686585 +0000
@@ -27,8 +27,8 @@
 	PPC405_ERR77(0,%3)
 "	stwcx.	%0,0,%3 \n\
 	bne-	1b"
-	: "=&r" (t), "=m" (v->counter)
-	: "r" (a), "r" (&v->counter), "m" (v->counter)
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (a), "r" (&v->counter)
 	: "cc");
 }
 
@@ -63,8 +63,8 @@
 	PPC405_ERR77(0,%3)
 "	stwcx.	%0,0,%3 \n\
 	bne-	1b"
-	: "=&r" (t), "=m" (v->counter)
-	: "r" (a), "r" (&v->counter), "m" (v->counter)
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (a), "r" (&v->counter)
 	: "cc");
 }
 
@@ -97,8 +97,8 @@
 	PPC405_ERR77(0,%2)
 "	stwcx.	%0,0,%2 \n\
 	bne-	1b"
-	: "=&r" (t), "=m" (v->counter)
-	: "r" (&v->counter), "m" (v->counter)
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (&v->counter)
 	: "cc");
 }
 
@@ -141,8 +141,8 @@
 	PPC405_ERR77(0,%2)\
 "	stwcx.	%0,0,%2\n\
 	bne-	1b"
-	: "=&r" (t), "=m" (v->counter)
-	: "r" (&v->counter), "m" (v->counter)
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (&v->counter)
 	: "cc");
 }
 
@@ -253,8 +253,8 @@
 	add	%0,%2,%0\n\
 	stdcx.	%0,0,%3 \n\
 	bne-	1b"
-	: "=&r" (t), "=m" (v->counter)
-	: "r" (a), "r" (&v->counter), "m" (v->counter)
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (a), "r" (&v->counter)
 	: "cc");
 }
 
@@ -287,8 +287,8 @@
 	subf	%0,%2,%0\n\
 	stdcx.	%0,0,%3 \n\
 	bne-	1b"
-	: "=&r" (t), "=m" (v->counter)
-	: "r" (a), "r" (&v->counter), "m" (v->counter)
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (a), "r" (&v->counter)
 	: "cc");
 }
 
@@ -319,8 +319,8 @@
 	addic	%0,%0,1\n\
 	stdcx.	%0,0,%2 \n\
 	bne-	1b"
-	: "=&r" (t), "=m" (v->counter)
-	: "r" (&v->counter), "m" (v->counter)
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (&v->counter)
 	: "cc");
 }
 
@@ -361,8 +361,8 @@
 	addic	%0,%0,-1\n\
 	stdcx.	%0,0,%2\n\
 	bne-	1b"
-	: "=&r" (t), "=m" (v->counter)
-	: "r" (&v->counter), "m" (v->counter)
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (&v->counter)
 	: "cc");
 }
 
diff -urN linux-2.6.18-rc1/include/asm-powerpc/backlight.h linux-2.6.18-rc2/include/asm-powerpc/backlight.h
--- linux-2.6.18-rc1/include/asm-powerpc/backlight.h	2006-07-15 22:34:43.613109915 +0000
+++ linux-2.6.18-rc2/include/asm-powerpc/backlight.h	2006-07-15 22:34:48.925686585 +0000
@@ -16,13 +16,19 @@
 extern struct backlight_device *pmac_backlight;
 extern struct mutex pmac_backlight_mutex;
 
-extern void pmac_backlight_calc_curve(struct fb_info*);
 extern int pmac_backlight_curve_lookup(struct fb_info *info, int value);
 
 extern int pmac_has_backlight_type(const char *type);
 
-extern void pmac_backlight_key_up(void);
-extern void pmac_backlight_key_down(void);
+extern void pmac_backlight_key(int direction);
+static inline void pmac_backlight_key_up(void)
+{
+	pmac_backlight_key(0);
+}
+static inline void pmac_backlight_key_down(void)
+{
+	pmac_backlight_key(1);
+}
 
 extern int pmac_backlight_set_legacy_brightness(int brightness);
 extern int pmac_backlight_get_legacy_brightness(void);
diff -urN linux-2.6.18-rc1/include/asm-powerpc/bitops.h linux-2.6.18-rc2/include/asm-powerpc/bitops.h
--- linux-2.6.18-rc1/include/asm-powerpc/bitops.h	2006-07-15 22:34:43.613109915 +0000
+++ linux-2.6.18-rc2/include/asm-powerpc/bitops.h	2006-07-15 22:34:48.929687019 +0000
@@ -65,8 +65,8 @@
 	PPC405_ERR77(0,%3)
 	PPC_STLCX "%0,0,%3\n"
 	"bne-	1b"
-	: "=&r"(old), "=m"(*p)
-	: "r"(mask), "r"(p), "m"(*p)
+	: "=&r" (old), "+m" (*p)
+	: "r" (mask), "r" (p)
 	: "cc" );
 }
 
@@ -82,8 +82,8 @@
 	PPC405_ERR77(0,%3)
 	PPC_STLCX "%0,0,%3\n"
 	"bne-	1b"
-	: "=&r"(old), "=m"(*p)
-	: "r"(mask), "r"(p), "m"(*p)
+	: "=&r" (old), "+m" (*p)
+	: "r" (mask), "r" (p)
 	: "cc" );
 }
 
@@ -99,8 +99,8 @@
 	PPC405_ERR77(0,%3)
 	PPC_STLCX "%0,0,%3\n"
 	"bne-	1b"
-	: "=&r"(old), "=m"(*p)
-	: "r"(mask), "r"(p), "m"(*p)
+	: "=&r" (old), "+m" (*p)
+	: "r" (mask), "r" (p)
 	: "cc" );
 }
 
@@ -179,8 +179,8 @@
 	"or	%0,%0,%2\n"
 	PPC_STLCX "%0,0,%3\n"
 	"bne-	1b"
-	: "=&r" (old), "=m" (*addr)
-	: "r" (mask), "r" (addr), "m" (*addr)
+	: "=&r" (old), "+m" (*addr)
+	: "r" (mask), "r" (addr)
 	: "cc");
 }
 
diff -urN linux-2.6.18-rc1/include/asm-powerpc/irq.h linux-2.6.18-rc2/include/asm-powerpc/irq.h
--- linux-2.6.18-rc1/include/asm-powerpc/irq.h	2006-07-15 22:34:43.617110349 +0000
+++ linux-2.6.18-rc2/include/asm-powerpc/irq.h	2006-07-15 22:34:48.933687454 +0000
@@ -83,25 +83,24 @@
 	int (*match)(struct irq_host *h, struct device_node *node);
 
 	/* Create or update a mapping between a virtual irq number and a hw
-	 * irq number. This can be called several times for the same mapping
-	 * but with different flags, though unmap shall always be called
-	 * before the virq->hw mapping is changed.
+	 * irq number. This is called only once for a given mapping.
 	 */
-	int (*map)(struct irq_host *h, unsigned int virq,
-		   irq_hw_number_t hw, unsigned int flags);
+	int (*map)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);
 
 	/* Dispose of such a mapping */
 	void (*unmap)(struct irq_host *h, unsigned int virq);
 
 	/* Translate device-tree interrupt specifier from raw format coming
 	 * from the firmware to a irq_hw_number_t (interrupt line number) and
-	 * trigger flags that can be passed to irq_create_mapping().
-	 * If no translation is provided, raw format is assumed to be one cell
-	 * for interrupt line and default sense.
+	 * type (sense) that can be passed to set_irq_type(). In the absence
+	 * of this callback, irq_create_of_mapping() and irq_of_parse_and_map()
+	 * will return the hw number in the first cell and IRQ_TYPE_NONE for
+	 * the type (which amount to keeping whatever default value the
+	 * interrupt controller has for that line)
 	 */
 	int (*xlate)(struct irq_host *h, struct device_node *ctrler,
 		     u32 *intspec, unsigned int intsize,
-		     irq_hw_number_t *out_hwirq, unsigned int *out_flags);
+		     irq_hw_number_t *out_hwirq, unsigned int *out_type);
 };
 
 struct irq_host {
@@ -193,25 +192,14 @@
  * irq_create_mapping - Map a hardware interrupt into linux virq space
  * @host: host owning this hardware interrupt or NULL for default host
  * @hwirq: hardware irq number in that host space
- * @flags: flags passed to the controller. contains the trigger type among
- *         others. Use IRQ_TYPE_* defined in include/linux/irq.h
  *
  * Only one mapping per hardware interrupt is permitted. Returns a linux
- * virq number. The flags can be used to provide sense information to the
- * controller (typically extracted from the device-tree). If no information
- * is passed, the controller defaults will apply (for example, xics can only
- * do edge so flags are irrelevant for some pseries specific irqs).
- *
- * The device-tree generally contains the trigger info in an encoding that is
- * specific to a given type of controller. In that case, you can directly use
- * host->ops->trigger_xlate() to translate that.
- *
- * It is recommended that new PICs that don't have existing OF bindings chose
- * to use a representation of triggers identical to linux.
+ * virq number.
+ * If the sense/trigger is to be specified, set_irq_type() should be called
+ * on the number returned from that call.
  */
 extern unsigned int irq_create_mapping(struct irq_host *host,
-				       irq_hw_number_t hwirq,
-				       unsigned int flags);
+				       irq_hw_number_t hwirq);
 
 
 /***
@@ -295,7 +283,7 @@
  *
  * This function is identical to irq_create_mapping except that it takes
  * as input informations straight from the device-tree (typically the results
- * of the of_irq_map_*() functions
+ * of the of_irq_map_*() functions.
  */
 extern unsigned int irq_create_of_mapping(struct device_node *controller,
 					  u32 *intspec, unsigned int intsize);
diff -urN linux-2.6.18-rc1/include/asm-powerpc/system.h linux-2.6.18-rc2/include/asm-powerpc/system.h
--- linux-2.6.18-rc1/include/asm-powerpc/system.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-powerpc/system.h	2006-07-15 22:34:48.941688322 +0000
@@ -39,7 +39,6 @@
 #define read_barrier_depends()  do { } while(0)
 
 #define set_mb(var, value)	do { var = value; mb(); } while (0)
-#define set_wmb(var, value)	do { var = value; wmb(); } while (0)
 
 #ifdef __KERNEL__
 #ifdef CONFIG_SMP
@@ -220,8 +219,8 @@
 "	stwcx.	%3,0,%2 \n\
 	bne-	1b"
 	ISYNC_ON_SMP
-	: "=&r" (prev), "=m" (*(volatile unsigned int *)p)
-	: "r" (p), "r" (val), "m" (*(volatile unsigned int *)p)
+	: "=&r" (prev), "+m" (*(volatile unsigned int *)p)
+	: "r" (p), "r" (val)
 	: "cc", "memory");
 
 	return prev;
@@ -240,8 +239,8 @@
 "	stdcx.	%3,0,%2 \n\
 	bne-	1b"
 	ISYNC_ON_SMP
-	: "=&r" (prev), "=m" (*(volatile unsigned long *)p)
-	: "r" (p), "r" (val), "m" (*(volatile unsigned long *)p)
+	: "=&r" (prev), "+m" (*(volatile unsigned long *)p)
+	: "r" (p), "r" (val)
 	: "cc", "memory");
 
 	return prev;
@@ -299,8 +298,8 @@
 	ISYNC_ON_SMP
 	"\n\
 2:"
-	: "=&r" (prev), "=m" (*p)
-	: "r" (p), "r" (old), "r" (new), "m" (*p)
+	: "=&r" (prev), "+m" (*p)
+	: "r" (p), "r" (old), "r" (new)
 	: "cc", "memory");
 
 	return prev;
@@ -322,8 +321,8 @@
 	ISYNC_ON_SMP
 	"\n\
 2:"
-	: "=&r" (prev), "=m" (*p)
-	: "r" (p), "r" (old), "r" (new), "m" (*p)
+	: "=&r" (prev), "+m" (*p)
+	: "r" (p), "r" (old), "r" (new)
 	: "cc", "memory");
 
 	return prev;
diff -urN linux-2.6.18-rc1/include/asm-ppc/system.h linux-2.6.18-rc2/include/asm-ppc/system.h
--- linux-2.6.18-rc1/include/asm-ppc/system.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-ppc/system.h	2006-07-15 22:34:48.949689191 +0000
@@ -33,7 +33,6 @@
 #define read_barrier_depends()  do { } while(0)
 
 #define set_mb(var, value)	do { var = value; mb(); } while (0)
-#define set_wmb(var, value)	do { var = value; wmb(); } while (0)
 
 #ifdef CONFIG_SMP
 #define smp_mb()	mb()
diff -urN linux-2.6.18-rc1/include/asm-s390/bug.h linux-2.6.18-rc2/include/asm-s390/bug.h
--- linux-2.6.18-rc1/include/asm-s390/bug.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-s390/bug.h	2006-07-15 22:34:48.949689191 +0000
@@ -5,9 +5,18 @@
 
 #ifdef CONFIG_BUG
 
+static inline __attribute__((noreturn)) void __do_illegal_op(void)
+{
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 3)
+	__builtin_trap();
+#else
+	asm volatile(".long 0");
+#endif
+}
+
 #define BUG() do { \
 	printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \
-	__builtin_trap(); \
+	__do_illegal_op(); \
 } while (0)
 
 #define HAVE_ARCH_BUG
diff -urN linux-2.6.18-rc1/include/asm-s390/ccwdev.h linux-2.6.18-rc2/include/asm-s390/ccwdev.h
--- linux-2.6.18-rc1/include/asm-s390/ccwdev.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-s390/ccwdev.h	2006-07-15 22:34:48.949689191 +0000
@@ -63,7 +63,7 @@
 		return id;
 	}
 
-	return 0;
+	return NULL;
 }
 
 /* The struct ccw device is our replacement for the globally accessible
diff -urN linux-2.6.18-rc1/include/asm-s390/cio.h linux-2.6.18-rc2/include/asm-s390/cio.h
--- linux-2.6.18-rc1/include/asm-s390/cio.h	2006-07-15 22:34:43.633112086 +0000
+++ linux-2.6.18-rc2/include/asm-s390/cio.h	2006-07-15 22:34:48.949689191 +0000
@@ -276,6 +276,8 @@
 
 extern void clear_all_subchannels(void);
 
+extern void cio_reset_channel_paths(void);
+
 extern void css_schedule_reprobe(void);
 
 #endif
diff -urN linux-2.6.18-rc1/include/asm-s390/futex.h linux-2.6.18-rc2/include/asm-s390/futex.h
--- linux-2.6.18-rc1/include/asm-s390/futex.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-s390/futex.h	2006-07-15 22:34:48.949689191 +0000
@@ -98,9 +98,10 @@
 
 	if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
 		return -EFAULT;
-	asm volatile("   cs   %1,%4,0(%5)\n"
+	asm volatile("   sacf 256\n"
+		     "   cs   %1,%4,0(%5)\n"
 		     "0: lr   %0,%1\n"
-		     "1:\n"
+		     "1: sacf 0\n"
 #ifndef __s390x__
 		     ".section __ex_table,\"a\"\n"
 		     "   .align 4\n"
diff -urN linux-2.6.18-rc1/include/asm-s390/irqflags.h linux-2.6.18-rc2/include/asm-s390/irqflags.h
--- linux-2.6.18-rc1/include/asm-s390/irqflags.h	2006-07-15 22:34:43.633112086 +0000
+++ linux-2.6.18-rc2/include/asm-s390/irqflags.h	2006-07-15 22:34:48.949689191 +0000
@@ -25,16 +25,22 @@
 	__flags; \
 	})
 
-#define raw_local_save_flags(x) \
-	__asm__ __volatile__("stosm 0(%1),0" : "=m" (x) : "a" (&x), "m" (x) )
-
-#define raw_local_irq_restore(x) \
-	__asm__ __volatile__("ssm   0(%0)" : : "a" (&x), "m" (x) : "memory")
+#define raw_local_save_flags(x)							\
+do {										\
+	typecheck(unsigned long, x);						\
+	__asm__ __volatile__("stosm 0(%1),0" : "=m" (x) : "a" (&x), "m" (x) );	\
+} while (0)
+
+#define raw_local_irq_restore(x)						\
+do {										\
+	typecheck(unsigned long, x);						\
+	__asm__ __volatile__("ssm   0(%0)" : : "a" (&x), "m" (x) : "memory");	\
+} while (0)
 
 #define raw_irqs_disabled()		\
 ({					\
 	unsigned long flags;		\
-	local_save_flags(flags);	\
+	raw_local_save_flags(flags);	\
 	!((flags >> __FLAG_SHIFT) & 3);	\
 })
 
diff -urN linux-2.6.18-rc1/include/asm-s390/pgalloc.h linux-2.6.18-rc2/include/asm-s390/pgalloc.h
--- linux-2.6.18-rc1/include/asm-s390/pgalloc.h	2006-07-15 22:34:43.633112086 +0000
+++ linux-2.6.18-rc2/include/asm-s390/pgalloc.h	2006-07-15 22:34:48.949689191 +0000
@@ -142,7 +142,7 @@
 	pte_t *pte = pte_alloc_one_kernel(mm, vmaddr);
 	if (pte)
 		return virt_to_page(pte);
-	return 0;
+	return NULL;
 }
 
 static inline void pte_free_kernel(pte_t *pte)
diff -urN linux-2.6.18-rc1/include/asm-s390/processor.h linux-2.6.18-rc2/include/asm-s390/processor.h
--- linux-2.6.18-rc1/include/asm-s390/processor.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-s390/processor.h	2006-07-15 22:34:48.953689625 +0000
@@ -199,15 +199,13 @@
 /*
  * Give up the time slice of the virtual PU.
  */
-#ifndef __s390x__
-# define cpu_relax()	asm volatile ("diag 0,0,68" : : : "memory")
-#else /* __s390x__ */
-# define cpu_relax() \
-	do { \
-		if (MACHINE_HAS_DIAG44) \
-			asm volatile ("diag 0,0,68" : : : "memory"); \
-	} while (0)
-#endif /* __s390x__ */
+static inline void cpu_relax(void)
+{
+	if (MACHINE_HAS_DIAG44)
+		asm volatile ("diag 0,0,68" : : : "memory");
+	else
+		barrier();
+}
 
 /*
  * Set PSW to specified value.
diff -urN linux-2.6.18-rc1/include/asm-s390/setup.h linux-2.6.18-rc2/include/asm-s390/setup.h
--- linux-2.6.18-rc1/include/asm-s390/setup.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-s390/setup.h	2006-07-15 22:34:48.953689625 +0000
@@ -40,15 +40,16 @@
 #define MACHINE_IS_VM		(machine_flags & 1)
 #define MACHINE_IS_P390		(machine_flags & 4)
 #define MACHINE_HAS_MVPG	(machine_flags & 16)
-#define MACHINE_HAS_DIAG44	(machine_flags & 32)
 #define MACHINE_HAS_IDTE	(machine_flags & 128)
 
 #ifndef __s390x__
 #define MACHINE_HAS_IEEE	(machine_flags & 2)
 #define MACHINE_HAS_CSP		(machine_flags & 8)
+#define MACHINE_HAS_DIAG44	(1)
 #else /* __s390x__ */
 #define MACHINE_HAS_IEEE	(1)
 #define MACHINE_HAS_CSP		(1)
+#define MACHINE_HAS_DIAG44	(machine_flags & 32)
 #endif /* __s390x__ */
 
 
diff -urN linux-2.6.18-rc1/include/asm-s390/system.h linux-2.6.18-rc2/include/asm-s390/system.h
--- linux-2.6.18-rc1/include/asm-s390/system.h	2006-07-15 22:34:43.637112520 +0000
+++ linux-2.6.18-rc2/include/asm-s390/system.h	2006-07-15 22:34:48.953689625 +0000
@@ -299,7 +299,6 @@
 
 
 #define set_mb(var, value)      do { var = value; mb(); } while (0)
-#define set_wmb(var, value)     do { var = value; wmb(); } while (0)
 
 #ifdef __s390x__
 
diff -urN linux-2.6.18-rc1/include/asm-sh/processor.h linux-2.6.18-rc2/include/asm-sh/processor.h
--- linux-2.6.18-rc1/include/asm-sh/processor.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-sh/processor.h	2006-07-15 22:34:48.957690059 +0000
@@ -9,6 +9,7 @@
 #define __ASM_SH_PROCESSOR_H
 #ifdef __KERNEL__
 
+#include <linux/compiler.h>
 #include <asm/page.h>
 #include <asm/types.h>
 #include <asm/cache.h>
@@ -263,7 +264,7 @@
 #define KSTK_ESP(tsk)  ((tsk)->thread.sp)
 
 #define cpu_sleep()	__asm__ __volatile__ ("sleep" : : : "memory")
-#define cpu_relax()	do { } while (0)
+#define cpu_relax()	barrier()
 
 #endif /* __KERNEL__ */
 #endif /* __ASM_SH_PROCESSOR_H */
diff -urN linux-2.6.18-rc1/include/asm-sh/system.h linux-2.6.18-rc2/include/asm-sh/system.h
--- linux-2.6.18-rc1/include/asm-sh/system.h	2006-07-15 22:34:43.641112955 +0000
+++ linux-2.6.18-rc2/include/asm-sh/system.h	2006-07-15 22:34:48.957690059 +0000
@@ -101,7 +101,6 @@
 #endif
 
 #define set_mb(var, value) do { xchg(&var, value); } while (0)
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
 
 /* Interrupt Control */
 static __inline__ void local_irq_enable(void)
diff -urN linux-2.6.18-rc1/include/asm-sh64/processor.h linux-2.6.18-rc2/include/asm-sh64/processor.h
--- linux-2.6.18-rc1/include/asm-sh64/processor.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-sh64/processor.h	2006-07-15 22:34:48.961690493 +0000
@@ -22,6 +22,7 @@
 #include <asm/cache.h>
 #include <asm/registers.h>
 #include <linux/threads.h>
+#include <linux/compiler.h>
 
 /*
  * Default implementation of macro that returns current
@@ -279,7 +280,7 @@
 #define KSTK_EIP(tsk)  ((tsk)->thread.pc)
 #define KSTK_ESP(tsk)  ((tsk)->thread.sp)
 
-#define cpu_relax()	do { } while (0)
+#define cpu_relax()	barrier()
 
 #endif	/* __ASSEMBLY__ */
 #endif /* __ASM_SH64_PROCESSOR_H */
diff -urN linux-2.6.18-rc1/include/asm-sh64/system.h linux-2.6.18-rc2/include/asm-sh64/system.h
--- linux-2.6.18-rc1/include/asm-sh64/system.h	2006-07-15 22:34:43.645113389 +0000
+++ linux-2.6.18-rc2/include/asm-sh64/system.h	2006-07-15 22:34:48.961690493 +0000
@@ -66,7 +66,6 @@
 
 #define set_rmb(var, value) do { xchg(&var, value); } while (0)
 #define set_mb(var, value) set_rmb(var, value)
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
 
 /* Interrupt Control */
 #ifndef HARD_CLI
diff -urN linux-2.6.18-rc1/include/asm-sparc/system.h linux-2.6.18-rc2/include/asm-sparc/system.h
--- linux-2.6.18-rc1/include/asm-sparc/system.h	2006-07-15 22:34:43.649113823 +0000
+++ linux-2.6.18-rc2/include/asm-sparc/system.h	2006-07-15 22:34:48.965690928 +0000
@@ -199,7 +199,6 @@
 #define wmb()	mb()
 #define read_barrier_depends()	do { } while(0)
 #define set_mb(__var, __value)  do { __var = __value; mb(); } while(0)
-#define set_wmb(__var, __value) set_mb(__var, __value)
 #define smp_mb()	__asm__ __volatile__("":::"memory")
 #define smp_rmb()	__asm__ __volatile__("":::"memory")
 #define smp_wmb()	__asm__ __volatile__("":::"memory")
diff -urN linux-2.6.18-rc1/include/asm-sparc64/Kbuild linux-2.6.18-rc2/include/asm-sparc64/Kbuild
--- linux-2.6.18-rc1/include/asm-sparc64/Kbuild	2006-07-15 22:34:43.649113823 +0000
+++ linux-2.6.18-rc2/include/asm-sparc64/Kbuild	2006-07-15 22:34:48.965690928 +0000
@@ -4,7 +4,7 @@
 ARCHDEF := defined __sparc__ && defined __arch64__
 ALTARCHDEF := defined __sparc__ && !defined __arch64__
 
-unifdef-y := fbio.h perfctr.h
+unifdef-y += fbio.h perfctr.h
 header-y += apb.h asi.h bbc.h bpp.h display7seg.h envctrl.h floppy.h	\
 	ipc.h kdebug.h mostek.h openprom.h openpromio.h parport.h	\
 	pconf.h psrcompat.h pstate.h reg.h uctx.h utrap.h watchdog.h
diff -urN linux-2.6.18-rc1/include/asm-sparc64/system.h linux-2.6.18-rc2/include/asm-sparc64/system.h
--- linux-2.6.18-rc1/include/asm-sparc64/system.h	2006-07-15 22:34:43.657114692 +0000
+++ linux-2.6.18-rc2/include/asm-sparc64/system.h	2006-07-15 22:34:48.973691796 +0000
@@ -123,8 +123,6 @@
 #define read_barrier_depends()		do { } while(0)
 #define set_mb(__var, __value) \
 	do { __var = __value; membar_storeload_storestore(); } while(0)
-#define set_wmb(__var, __value) \
-	do { __var = __value; wmb(); } while(0)
 
 #ifdef CONFIG_SMP
 #define smp_mb()	mb()
diff -urN linux-2.6.18-rc1/include/asm-v850/processor.h linux-2.6.18-rc2/include/asm-v850/processor.h
--- linux-2.6.18-rc1/include/asm-v850/processor.h	2006-07-15 22:34:43.661115126 +0000
+++ linux-2.6.18-rc2/include/asm-v850/processor.h	2006-07-15 22:34:48.977692230 +0000
@@ -18,6 +18,7 @@
 #include <linux/thread_info.h>
 #endif
 
+#include <linux/compiler.h>
 #include <asm/ptrace.h>
 #include <asm/entry.h>
 
@@ -106,7 +107,7 @@
 #define KSTK_ESP(task)	task_sp (task)
 
 
-#define cpu_relax()    ((void)0)
+#define cpu_relax()    barrier()
 
 
 #else /* __ASSEMBLY__ */
diff -urN linux-2.6.18-rc1/include/asm-v850/system.h linux-2.6.18-rc2/include/asm-v850/system.h
--- linux-2.6.18-rc1/include/asm-v850/system.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-v850/system.h	2006-07-15 22:34:48.977692230 +0000
@@ -68,7 +68,6 @@
 #define read_barrier_depends()	((void)0)
 #define set_rmb(var, value)	do { xchg (&var, value); } while (0)
 #define set_mb(var, value)	set_rmb (var, value)
-#define set_wmb(var, value)	do { var = value; wmb (); } while (0)
 
 #define smp_mb()	mb ()
 #define smp_rmb()	rmb ()
diff -urN linux-2.6.18-rc1/include/asm-x86_64/calgary.h linux-2.6.18-rc2/include/asm-x86_64/calgary.h
--- linux-2.6.18-rc1/include/asm-x86_64/calgary.h	2006-07-15 22:34:43.661115126 +0000
+++ linux-2.6.18-rc2/include/asm-x86_64/calgary.h	2006-07-15 22:34:48.981692665 +0000
@@ -1,8 +1,10 @@
 /*
  * Derived from include/asm-powerpc/iommu.h
  *
- * Copyright (C) 2006 Jon Mason <jdmason@us.ibm.com>, IBM Corporation
- * Copyright (C) 2006 Muli Ben-Yehuda <muli@il.ibm.com>, IBM Corporation
+ * Copyright (C) IBM Corporation, 2006
+ *
+ * Author: Jon Mason <jdmason@us.ibm.com>
+ * Author: Muli Ben-Yehuda <muli@il.ibm.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff -urN linux-2.6.18-rc1/include/asm-x86_64/system.h linux-2.6.18-rc2/include/asm-x86_64/system.h
--- linux-2.6.18-rc1/include/asm-x86_64/system.h	2006-07-15 22:34:43.669115994 +0000
+++ linux-2.6.18-rc2/include/asm-x86_64/system.h	2006-07-15 22:34:48.989693533 +0000
@@ -240,7 +240,6 @@
 #endif
 #define read_barrier_depends()	do {} while(0)
 #define set_mb(var, value) do { (void) xchg(&var, value); } while (0)
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
 
 #define warn_if_not_ulong(x) do { unsigned long foo; (void) (&(x) == &foo); } while (0)
 
diff -urN linux-2.6.18-rc1/include/asm-x86_64/tce.h linux-2.6.18-rc2/include/asm-x86_64/tce.h
--- linux-2.6.18-rc1/include/asm-x86_64/tce.h	2006-07-15 22:34:43.673116428 +0000
+++ linux-2.6.18-rc2/include/asm-x86_64/tce.h	2006-07-15 22:34:48.989693533 +0000
@@ -1,9 +1,11 @@
 /*
- * Copyright (C) 2006 Muli Ben-Yehuda <muli@il.ibm.com>, IBM Corporation
- * Copyright (C) 2006 Jon Mason <jdmason@us.ibm.com>, IBM Corporation
- *
  * This file is derived from asm-powerpc/tce.h.
  *
+ * Copyright (C) IBM Corporation, 2006
+ *
+ * Author: Muli Ben-Yehuda <muli@il.ibm.com>
+ * Author: Jon Mason <jdmason@us.ibm.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
diff -urN linux-2.6.18-rc1/include/asm-xtensa/processor.h linux-2.6.18-rc2/include/asm-xtensa/processor.h
--- linux-2.6.18-rc1/include/asm-xtensa/processor.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/asm-xtensa/processor.h	2006-07-15 22:34:48.993693967 +0000
@@ -20,6 +20,7 @@
 #include <xtensa/config/tie.h>
 #include <xtensa/config/system.h>
 
+#include <linux/compiler.h>
 #include <asm/ptrace.h>
 #include <asm/types.h>
 #include <asm/coprocessor.h>
@@ -191,7 +192,7 @@
 #define KSTK_EIP(tsk)		(task_pt_regs(tsk)->pc)
 #define KSTK_ESP(tsk)		(task_pt_regs(tsk)->areg[1])
 
-#define cpu_relax()  do { } while (0)
+#define cpu_relax()  barrier()
 
 /* Special register access. */
 
diff -urN linux-2.6.18-rc1/include/asm-xtensa/system.h linux-2.6.18-rc2/include/asm-xtensa/system.h
--- linux-2.6.18-rc1/include/asm-xtensa/system.h	2006-07-15 22:34:43.673116428 +0000
+++ linux-2.6.18-rc2/include/asm-xtensa/system.h	2006-07-15 22:34:48.993693967 +0000
@@ -99,7 +99,6 @@
 #endif
 
 #define set_mb(var, value)	do { var = value; mb(); } while (0)
-#define set_wmb(var, value)	do { var = value; wmb(); } while (0)
 
 #if !defined (__ASSEMBLY__)
 
diff -urN linux-2.6.18-rc1/include/linux/blktrace_api.h linux-2.6.18-rc2/include/linux/blktrace_api.h
--- linux-2.6.18-rc1/include/linux/blktrace_api.h	2006-07-15 22:34:43.681117297 +0000
+++ linux-2.6.18-rc2/include/linux/blktrace_api.h	2006-07-15 22:34:48.997694402 +0000
@@ -11,7 +11,7 @@
 	BLK_TC_READ	= 1 << 0,	/* reads */
 	BLK_TC_WRITE	= 1 << 1,	/* writes */
 	BLK_TC_BARRIER	= 1 << 2,	/* barrier */
-	BLK_TC_SYNC	= 1 << 3,	/* barrier */
+	BLK_TC_SYNC	= 1 << 3,	/* sync IO */
 	BLK_TC_QUEUE	= 1 << 4,	/* queueing/merging */
 	BLK_TC_REQUEUE	= 1 << 5,	/* requeueing */
 	BLK_TC_ISSUE	= 1 << 6,	/* issue */
@@ -19,6 +19,7 @@
 	BLK_TC_FS	= 1 << 8,	/* fs requests */
 	BLK_TC_PC	= 1 << 9,	/* pc requests */
 	BLK_TC_NOTIFY	= 1 << 10,	/* special message */
+	BLK_TC_AHEAD	= 1 << 11,	/* readahead */
 
 	BLK_TC_END	= 1 << 15,	/* only 16-bits, reminder */
 };
@@ -147,7 +148,7 @@
 				    u32 what)
 {
 	struct blk_trace *bt = q->blk_trace;
-	int rw = rq->flags & 0x07;
+	int rw = rq->flags & 0x03;
 
 	if (likely(!bt))
 		return;
diff -urN linux-2.6.18-rc1/include/linux/bootmem.h linux-2.6.18-rc2/include/linux/bootmem.h
--- linux-2.6.18-rc1/include/linux/bootmem.h	2006-07-15 22:34:43.681117297 +0000
+++ linux-2.6.18-rc2/include/linux/bootmem.h	2006-07-15 22:34:48.997694402 +0000
@@ -91,7 +91,7 @@
 }
 #endif
 
-extern unsigned long nr_kernel_pages;
+extern unsigned long __meminitdata nr_kernel_pages;
 extern unsigned long nr_all_pages;
 
 extern void *__init alloc_large_system_hash(const char *tablename,
diff -urN linux-2.6.18-rc1/include/linux/completion.h linux-2.6.18-rc2/include/linux/completion.h
--- linux-2.6.18-rc1/include/linux/completion.h	2006-07-15 22:34:43.681117297 +0000
+++ linux-2.6.18-rc2/include/linux/completion.h	2006-07-15 22:34:49.001694836 +0000
@@ -18,6 +18,9 @@
 #define COMPLETION_INITIALIZER(work) \
 	{ 0, __WAIT_QUEUE_HEAD_INITIALIZER((work).wait) }
 
+#define COMPLETION_INITIALIZER_ONSTACK(work) \
+	({ init_completion(&work); work; })
+
 #define DECLARE_COMPLETION(work) \
 	struct completion work = COMPLETION_INITIALIZER(work)
 
@@ -28,7 +31,7 @@
  */
 #ifdef CONFIG_LOCKDEP
 # define DECLARE_COMPLETION_ONSTACK(work) \
-	struct completion work = ({ init_completion(&work); work; })
+	struct completion work = COMPLETION_INITIALIZER_ONSTACK(work)
 #else
 # define DECLARE_COMPLETION_ONSTACK(work) DECLARE_COMPLETION(work)
 #endif
diff -urN linux-2.6.18-rc1/include/linux/console_struct.h linux-2.6.18-rc2/include/linux/console_struct.h
--- linux-2.6.18-rc1/include/linux/console_struct.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/linux/console_struct.h	2006-07-15 22:34:49.001694836 +0000
@@ -9,6 +9,7 @@
  * to achieve effects such as fast scrolling by changing the origin.
  */
 
+#include <linux/wait.h>
 #include <linux/vt.h>
 
 struct vt_struct;
diff -urN linux-2.6.18-rc1/include/linux/delayacct.h linux-2.6.18-rc2/include/linux/delayacct.h
--- linux-2.6.18-rc1/include/linux/delayacct.h	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/include/linux/delayacct.h	2006-07-15 22:34:49.001694836 +0000
@@ -0,0 +1,119 @@
+/* delayacct.h - per-task delay accounting
+ *
+ * Copyright (C) Shailabh Nagar, IBM Corp. 2006
+ *
+ * This program is free software;  you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY;  without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ * the GNU General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_DELAYACCT_H
+#define _LINUX_DELAYACCT_H
+
+#include <linux/sched.h>
+#include <linux/taskstats_kern.h>
+
+/*
+ * Per-task flags relevant to delay accounting
+ * maintained privately to avoid exhausting similar flags in sched.h:PF_*
+ * Used to set current->delays->flags
+ */
+#define DELAYACCT_PF_SWAPIN	0x00000001	/* I am doing a swapin */
+
+#ifdef CONFIG_TASK_DELAY_ACCT
+
+extern int delayacct_on;	/* Delay accounting turned on/off */
+extern kmem_cache_t *delayacct_cache;
+extern void delayacct_init(void);
+extern void __delayacct_tsk_init(struct task_struct *);
+extern void __delayacct_tsk_exit(struct task_struct *);
+extern void __delayacct_blkio_start(void);
+extern void __delayacct_blkio_end(void);
+extern int __delayacct_add_tsk(struct taskstats *, struct task_struct *);
+extern __u64 __delayacct_blkio_ticks(struct task_struct *);
+
+static inline void delayacct_set_flag(int flag)
+{
+	if (current->delays)
+		current->delays->flags |= flag;
+}
+
+static inline void delayacct_clear_flag(int flag)
+{
+	if (current->delays)
+		current->delays->flags &= ~flag;
+}
+
+static inline void delayacct_tsk_init(struct task_struct *tsk)
+{
+	/* reinitialize in case parent's non-null pointer was dup'ed*/
+	tsk->delays = NULL;
+	if (unlikely(delayacct_on))
+		__delayacct_tsk_init(tsk);
+}
+
+static inline void delayacct_tsk_exit(struct task_struct *tsk)
+{
+	if (tsk->delays)
+		__delayacct_tsk_exit(tsk);
+}
+
+static inline void delayacct_blkio_start(void)
+{
+	if (current->delays)
+		__delayacct_blkio_start();
+}
+
+static inline void delayacct_blkio_end(void)
+{
+	if (current->delays)
+		__delayacct_blkio_end();
+}
+
+static inline int delayacct_add_tsk(struct taskstats *d,
+					struct task_struct *tsk)
+{
+	if (likely(!delayacct_on))
+		return -EINVAL;
+	if (!tsk->delays)
+		return 0;
+	return __delayacct_add_tsk(d, tsk);
+}
+
+static inline __u64 delayacct_blkio_ticks(struct task_struct *tsk)
+{
+	if (tsk->delays)
+		return __delayacct_blkio_ticks(tsk);
+	return 0;
+}
+
+#else
+static inline void delayacct_set_flag(int flag)
+{}
+static inline void delayacct_clear_flag(int flag)
+{}
+static inline void delayacct_init(void)
+{}
+static inline void delayacct_tsk_init(struct task_struct *tsk)
+{}
+static inline void delayacct_tsk_exit(struct task_struct *tsk)
+{}
+static inline void delayacct_blkio_start(void)
+{}
+static inline void delayacct_blkio_end(void)
+{}
+static inline int delayacct_add_tsk(struct taskstats *d,
+					struct task_struct *tsk)
+{ return 0; }
+static inline __u64 delayacct_blkio_ticks(struct task_struct *tsk)
+{ return 0; }
+#endif /* CONFIG_TASK_DELAY_ACCT */
+
+#endif
diff -urN linux-2.6.18-rc1/include/linux/elfcore.h linux-2.6.18-rc2/include/linux/elfcore.h
--- linux-2.6.18-rc1/include/linux/elfcore.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/linux/elfcore.h	2006-07-15 22:34:49.005695270 +0000
@@ -60,6 +60,16 @@
 	long	pr_instr;		/* Current instruction */
 #endif
 	elf_gregset_t pr_reg;	/* GP registers */
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+	/* When using FDPIC, the loadmap addresses need to be communicated
+	 * to GDB in order for GDB to do the necessary relocations.  The
+	 * fields (below) used to communicate this information are placed
+	 * immediately after ``pr_reg'', so that the loadmap addresses may
+	 * be viewed as part of the register set if so desired.
+	 */
+	unsigned long pr_exec_fdpic_loadmap;
+	unsigned long pr_interp_fdpic_loadmap;
+#endif
 	int pr_fpvalid;		/* True if math co-processor being used.  */
 };
 
diff -urN linux-2.6.18-rc1/include/linux/fb.h linux-2.6.18-rc2/include/linux/fb.h
--- linux-2.6.18-rc1/include/linux/fb.h	2006-07-15 22:34:43.689118165 +0000
+++ linux-2.6.18-rc2/include/linux/fb.h	2006-07-15 22:34:49.009695704 +0000
@@ -377,7 +377,6 @@
 
 #include <linux/fs.h>
 #include <linux/init.h>
-#include <linux/tty.h>
 #include <linux/device.h>
 #include <linux/workqueue.h>
 #include <linux/notifier.h>
diff -urN linux-2.6.18-rc1/include/linux/fs.h linux-2.6.18-rc2/include/linux/fs.h
--- linux-2.6.18-rc1/include/linux/fs.h	2006-07-15 22:34:43.693118600 +0000
+++ linux-2.6.18-rc2/include/linux/fs.h	2006-07-15 22:34:49.009695704 +0000
@@ -27,6 +27,10 @@
 #define BLOCK_SIZE_BITS 10
 #define BLOCK_SIZE (1<<BLOCK_SIZE_BITS)
 
+#define SEEK_SET	0	/* seek relative to beginning of file */
+#define SEEK_CUR	1	/* seek relative to current file position */
+#define SEEK_END	2	/* seek relative to end of file */
+
 /* And dynamically-tunable limits and defaults: */
 struct files_stat_struct {
 	int nr_files;		/* read only */
diff -urN linux-2.6.18-rc1/include/linux/hdlc.h linux-2.6.18-rc2/include/linux/hdlc.h
--- linux-2.6.18-rc1/include/linux/hdlc.h	2006-07-15 22:34:43.697119034 +0000
+++ linux-2.6.18-rc2/include/linux/hdlc.h	2006-07-15 22:34:49.013696139 +0000
@@ -224,8 +224,6 @@
 int hdlc_open(struct net_device *dev);
 /* Must be called by hardware driver when HDLC device is being closed */
 void hdlc_close(struct net_device *dev);
-/* Called by hardware driver when DCD line level changes */
-void hdlc_set_carrier(int on, struct net_device *dev);
 
 /* May be used by hardware driver to gain control over HDLC device */
 static __inline__ void hdlc_proto_detach(hdlc_device *hdlc)
diff -urN linux-2.6.18-rc1/include/linux/i2c-id.h linux-2.6.18-rc2/include/linux/i2c-id.h
--- linux-2.6.18-rc1/include/linux/i2c-id.h	2006-07-15 22:34:43.697119034 +0000
+++ linux-2.6.18-rc2/include/linux/i2c-id.h	2006-07-15 22:34:49.013696139 +0000
@@ -115,6 +115,7 @@
 #define I2C_DRIVERID_BT866	85	/* Conexant bt866 video encoder */
 #define I2C_DRIVERID_KS0127	86	/* Samsung ks0127 video decoder */
 #define I2C_DRIVERID_TLV320AIC23B 87	/* TI TLV320AIC23B audio codec  */
+#define I2C_DRIVERID_ISL1208	88	/* Intersil ISL1208 RTC		*/
 
 #define I2C_DRIVERID_I2CDEV	900
 #define I2C_DRIVERID_ARP        902    /* SMBus ARP Client              */
diff -urN linux-2.6.18-rc1/include/linux/i2c.h linux-2.6.18-rc2/include/linux/i2c.h
--- linux-2.6.18-rc1/include/linux/i2c.h	2006-07-15 22:34:43.697119034 +0000
+++ linux-2.6.18-rc2/include/linux/i2c.h	2006-07-15 22:34:49.013696139 +0000
@@ -193,6 +193,8 @@
 	   to NULL. If an adapter algorithm can do SMBus access, set 
 	   smbus_xfer. If set to NULL, the SMBus protocol is simulated
 	   using common I2C messages */
+	/* master_xfer should return the number of messages successfully
+	   processed, or a negative value on error */
 	int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs, 
 	                   int num);
 	int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr, 
diff -urN linux-2.6.18-rc1/include/linux/if_vlan.h linux-2.6.18-rc2/include/linux/if_vlan.h
--- linux-2.6.18-rc1/include/linux/if_vlan.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/linux/if_vlan.h	2006-07-15 22:34:49.017696573 +0000
@@ -23,8 +23,8 @@
 struct vlan_dev_info;
 struct hlist_node;
 
-#include <linux/proc_fs.h> /* for proc_dir_entry */
 #include <linux/netdevice.h>
+#include <linux/etherdevice.h>
 
 #define VLAN_HLEN	4		/* The additional bytes (on top of the Ethernet header)
 					 * that VLAN requires.
@@ -185,7 +185,8 @@
 		 * This allows the VLAN to have a different MAC than the underlying
 		 * device, and still route correctly.
 		 */
-		if (!memcmp(eth_hdr(skb)->h_dest, skb->dev->dev_addr, ETH_ALEN))
+		if (!compare_ether_addr(eth_hdr(skb)->h_dest,
+				       	skb->dev->dev_addr))
 			skb->pkt_type = PACKET_HOST;
 		break;
 	};
diff -urN linux-2.6.18-rc1/include/linux/ioport.h linux-2.6.18-rc2/include/linux/ioport.h
--- linux-2.6.18-rc1/include/linux/ioport.h	2006-07-15 22:34:43.701119468 +0000
+++ linux-2.6.18-rc2/include/linux/ioport.h	2006-07-15 22:34:49.017696573 +0000
@@ -97,7 +97,7 @@
 extern int request_resource(struct resource *root, struct resource *new);
 extern struct resource * ____request_resource(struct resource *root, struct resource *new);
 extern int release_resource(struct resource *new);
-extern __deprecated_for_modules int insert_resource(struct resource *parent, struct resource *new);
+extern int insert_resource(struct resource *parent, struct resource *new);
 extern int allocate_resource(struct resource *root, struct resource *new,
 			     resource_size_t size, resource_size_t min,
 			     resource_size_t max, resource_size_t align,
diff -urN linux-2.6.18-rc1/include/linux/kernel.h linux-2.6.18-rc2/include/linux/kernel.h
--- linux-2.6.18-rc1/include/linux/kernel.h	2006-07-15 22:34:43.709120337 +0000
+++ linux-2.6.18-rc2/include/linux/kernel.h	2006-07-15 22:34:49.025697441 +0000
@@ -33,6 +33,7 @@
 #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
 #define ALIGN(x,a) (((x)+(a)-1)&~((a)-1))
 #define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f))
+#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
 
 #define	KERN_EMERG	"<0>"	/* system is unusable			*/
 #define	KERN_ALERT	"<1>"	/* action must be taken immediately	*/
diff -urN linux-2.6.18-rc1/include/linux/kthread.h linux-2.6.18-rc2/include/linux/kthread.h
--- linux-2.6.18-rc1/include/linux/kthread.h	2006-07-15 22:34:43.709120337 +0000
+++ linux-2.6.18-rc2/include/linux/kthread.h	2006-07-15 22:34:49.025697441 +0000
@@ -28,7 +28,6 @@
 
 void kthread_bind(struct task_struct *k, unsigned int cpu);
 int kthread_stop(struct task_struct *k);
-int kthread_stop_sem(struct task_struct *k, struct semaphore *s);
 int kthread_should_stop(void);
 
 #endif /* _LINUX_KTHREAD_H */
diff -urN linux-2.6.18-rc1/include/linux/list.h linux-2.6.18-rc2/include/linux/list.h
--- linux-2.6.18-rc1/include/linux/list.h	2006-07-15 22:34:43.713120771 +0000
+++ linux-2.6.18-rc2/include/linux/list.h	2006-07-15 22:34:49.029697875 +0000
@@ -265,6 +265,17 @@
 }
 
 /**
+ * list_is_last - tests whether @list is the last entry in list @head
+ * @list: the entry to test
+ * @head: the head of the list
+ */
+static inline int list_is_last(const struct list_head *list,
+				const struct list_head *head)
+{
+	return list->next == head;
+}
+
+/**
  * list_empty - tests whether a list is empty
  * @head: the list to test.
  */
diff -urN linux-2.6.18-rc1/include/linux/lockdep.h linux-2.6.18-rc2/include/linux/lockdep.h
--- linux-2.6.18-rc1/include/linux/lockdep.h	2006-07-15 22:34:43.713120771 +0000
+++ linux-2.6.18-rc2/include/linux/lockdep.h	2006-07-15 22:34:49.029697875 +0000
@@ -120,7 +120,7 @@
  */
 struct lockdep_map {
 	struct lock_class_key		*key;
-	struct lock_class		*class[MAX_LOCKDEP_SUBCLASSES];
+	struct lock_class		*class_cache;
 	const char			*name;
 };
 
diff -urN linux-2.6.18-rc1/include/linux/mc146818rtc.h linux-2.6.18-rc2/include/linux/mc146818rtc.h
--- linux-2.6.18-rc1/include/linux/mc146818rtc.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/linux/mc146818rtc.h	2006-07-15 22:34:49.029697875 +0000
@@ -89,4 +89,11 @@
 # define RTC_VRT 0x80		/* valid RAM and time */
 /**********************************************************************/
 
+#ifndef ARCH_RTC_LOCATION	/* Override by <asm/mc146818rtc.h>? */
+
+#define RTC_IO_EXTENT	0x8
+#define RTC_IOMAPPED	1	/* Default to I/O mapping. */
+
+#endif /* ARCH_RTC_LOCATION */
+
 #endif /* _MC146818RTC_H */
diff -urN linux-2.6.18-rc1/include/linux/module.h linux-2.6.18-rc2/include/linux/module.h
--- linux-2.6.18-rc1/include/linux/module.h	2006-07-15 22:34:43.713120771 +0000
+++ linux-2.6.18-rc2/include/linux/module.h	2006-07-15 22:34:49.029697875 +0000
@@ -362,10 +362,8 @@
 
 /* Returns module and fills in value, defined and namebuf, or NULL if
    symnum out of range. */
-struct module *module_get_kallsym(unsigned int symnum,
-				  unsigned long *value,
-				  char *type,
-				  char namebuf[128]);
+struct module *module_get_kallsym(unsigned int symnum, unsigned long *value,
+				char *type, char *name, size_t namelen);
 
 /* Look for this name: can be of form module:name. */
 unsigned long module_kallsyms_lookup_name(const char *name);
@@ -535,8 +533,8 @@
 
 static inline struct module *module_get_kallsym(unsigned int symnum,
 						unsigned long *value,
-						char *type,
-						char namebuf[128])
+						char *type, char *name,
+						size_t namelen)
 {
 	return NULL;
 }
diff -urN linux-2.6.18-rc1/include/linux/namei.h linux-2.6.18-rc2/include/linux/namei.h
--- linux-2.6.18-rc1/include/linux/namei.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/linux/namei.h	2006-07-15 22:34:49.033698310 +0000
@@ -11,7 +11,7 @@
 	struct file *file;
 };
 
-enum { MAX_NESTED_LINKS = 5 };
+enum { MAX_NESTED_LINKS = 8 };
 
 struct nameidata {
 	struct dentry	*dentry;
diff -urN linux-2.6.18-rc1/include/linux/netdevice.h linux-2.6.18-rc2/include/linux/netdevice.h
--- linux-2.6.18-rc1/include/linux/netdevice.h	2006-07-15 22:34:43.721121639 +0000
+++ linux-2.6.18-rc2/include/linux/netdevice.h	2006-07-15 22:34:49.037698744 +0000
@@ -549,6 +549,7 @@
 					 struct net_device *);
 	struct sk_buff		*(*gso_segment)(struct sk_buff *skb,
 						int features);
+	int			(*gso_send_check)(struct sk_buff *skb);
 	void			*af_packet_priv;
 	struct list_head	list;
 };
@@ -1001,13 +1002,14 @@
 
 static inline int skb_gso_ok(struct sk_buff *skb, int features)
 {
-	return net_gso_ok(features, skb_shinfo(skb)->gso_size ?
-				    skb_shinfo(skb)->gso_type : 0);
+	return net_gso_ok(features, skb_shinfo(skb)->gso_type);
 }
 
 static inline int netif_needs_gso(struct net_device *dev, struct sk_buff *skb)
 {
-	return !skb_gso_ok(skb, dev->features);
+	return skb_is_gso(skb) &&
+	       (!skb_gso_ok(skb, dev->features) ||
+		unlikely(skb->ip_summed != CHECKSUM_HW));
 }
 
 #endif /* __KERNEL__ */
diff -urN linux-2.6.18-rc1/include/linux/nfs4.h linux-2.6.18-rc2/include/linux/nfs4.h
--- linux-2.6.18-rc1/include/linux/nfs4.h	2006-07-15 22:34:43.725122074 +0000
+++ linux-2.6.18-rc2/include/linux/nfs4.h	2006-07-15 22:34:49.041699178 +0000
@@ -157,6 +157,12 @@
 	OP_ILLEGAL = 10044,
 };
 
+/*Defining first and last NFS4 operations implemented.
+Needs to be updated if more operations are defined in future.*/
+
+#define FIRST_NFS4_OP	OP_ACCESS
+#define LAST_NFS4_OP 	OP_RELEASE_LOCKOWNER
+
 enum nfsstat4 {
 	NFS4_OK = 0,
 	NFS4ERR_PERM = 1,
diff -urN linux-2.6.18-rc1/include/linux/nfsd/stats.h linux-2.6.18-rc2/include/linux/nfsd/stats.h
--- linux-2.6.18-rc1/include/linux/nfsd/stats.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/linux/nfsd/stats.h	2006-07-15 22:34:49.041699178 +0000
@@ -9,6 +9,8 @@
 #ifndef LINUX_NFSD_STATS_H
 #define LINUX_NFSD_STATS_H
 
+#include <linux/nfs4.h>
+
 struct nfsd_stats {
 	unsigned int	rchits;		/* repcache hits */
 	unsigned int	rcmisses;	/* repcache hits */
@@ -27,6 +29,10 @@
 	unsigned int	ra_size;	/* size of ra cache */
 	unsigned int	ra_depth[11];	/* number of times ra entry was found that deep
 					 * in the cache (10percentiles). [10] = not found */
+#ifdef CONFIG_NFSD_V4
+	unsigned int	nfs4_opcount[LAST_NFS4_OP + 1];	/* count of individual nfsv4 operations */
+#endif
+
 };
 
 /* thread usage wraps very million seconds (approx one fortnight) */
diff -urN linux-2.6.18-rc1/include/linux/nsc_gpio.h linux-2.6.18-rc2/include/linux/nsc_gpio.h
--- linux-2.6.18-rc1/include/linux/nsc_gpio.h	2006-07-15 22:34:43.725122074 +0000
+++ linux-2.6.18-rc2/include/linux/nsc_gpio.h	2006-07-15 22:34:49.041699178 +0000
@@ -25,8 +25,6 @@
 	void	(*gpio_dump)	(struct nsc_gpio_ops *amp, unsigned iminor);
 	int	(*gpio_get)	(unsigned iminor);
 	void	(*gpio_set)	(unsigned iminor, int state);
-	void	(*gpio_set_high)(unsigned iminor);
-	void	(*gpio_set_low)	(unsigned iminor);
 	void	(*gpio_change)	(unsigned iminor);
 	int	(*gpio_current)	(unsigned iminor);
 	struct device*	dev;	/* for dev_dbg() support, set in init  */
diff -urN linux-2.6.18-rc1/include/linux/pci.h linux-2.6.18-rc2/include/linux/pci.h
--- linux-2.6.18-rc1/include/linux/pci.h	2006-07-15 22:34:43.729122508 +0000
+++ linux-2.6.18-rc2/include/linux/pci.h	2006-07-15 22:34:49.045699612 +0000
@@ -161,6 +161,7 @@
 	unsigned int	is_enabled:1;	/* pci_enable_device has been called */
 	unsigned int	is_busmaster:1; /* device is busmaster */
 	unsigned int	no_msi:1;	/* device may not use msi */
+	unsigned int	no_d1d2:1;   /* only allow d0 or d3 */
 	unsigned int	block_ucfg_access:1;	/* userspace config space access is blocked */
 	unsigned int	broken_parity_status:1;	/* Device generates false positive parity */
 	unsigned int 	msi_enabled:1;
diff -urN linux-2.6.18-rc1/include/linux/pci_regs.h linux-2.6.18-rc2/include/linux/pci_regs.h
--- linux-2.6.18-rc1/include/linux/pci_regs.h	2006-07-15 22:34:43.729122508 +0000
+++ linux-2.6.18-rc2/include/linux/pci_regs.h	2006-07-15 22:34:49.045699612 +0000
@@ -422,7 +422,23 @@
 #define  PCI_ERR_CAP_ECRC_CHKE	0x00000100	/* ECRC Check Enable */
 #define PCI_ERR_HEADER_LOG	28	/* Header Log Register (16 bytes) */
 #define PCI_ERR_ROOT_COMMAND	44	/* Root Error Command */
+/* Correctable Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_COR_EN		0x00000001
+/* Non-fatal Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_NONFATAL_EN	0x00000002
+/* Fatal Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_FATAL_EN	0x00000004
 #define PCI_ERR_ROOT_STATUS	48
+#define PCI_ERR_ROOT_COR_RCV		0x00000001	/* ERR_COR Received */
+/* Multi ERR_COR Received */
+#define PCI_ERR_ROOT_MULTI_COR_RCV	0x00000002
+/* ERR_FATAL/NONFATAL Recevied */
+#define PCI_ERR_ROOT_UNCOR_RCV		0x00000004
+/* Multi ERR_FATAL/NONFATAL Recevied */
+#define PCI_ERR_ROOT_MULTI_UNCOR_RCV	0x00000008
+#define PCI_ERR_ROOT_FIRST_FATAL	0x00000010	/* First Fatal */
+#define PCI_ERR_ROOT_NONFATAL_RCV	0x00000020	/* Non-Fatal Received */
+#define PCI_ERR_ROOT_FATAL_RCV		0x00000040	/* Fatal Received */
 #define PCI_ERR_ROOT_COR_SRC	52
 #define PCI_ERR_ROOT_SRC	54
 
diff -urN linux-2.6.18-rc1/include/linux/pm_legacy.h linux-2.6.18-rc2/include/linux/pm_legacy.h
--- linux-2.6.18-rc1/include/linux/pm_legacy.h	2006-07-15 22:34:43.729122508 +0000
+++ linux-2.6.18-rc2/include/linux/pm_legacy.h	2006-07-15 22:34:49.045699612 +0000
@@ -15,11 +15,6 @@
 pm_register(pm_dev_t type, unsigned long id, pm_callback callback);
 
 /*
- * Unregister all devices with matching callback
- */
-void __deprecated pm_unregister_all(pm_callback callback);
-
-/*
  * Send a request to all devices
  */
 int __deprecated pm_send_all(pm_request_t rqst, void *data);
@@ -35,8 +30,6 @@
 	return NULL;
 }
 
-static inline void pm_unregister_all(pm_callback callback) {}
-
 static inline int pm_send_all(pm_request_t rqst, void *data)
 {
 	return 0;
diff -urN linux-2.6.18-rc1/include/linux/raid/md_k.h linux-2.6.18-rc2/include/linux/raid/md_k.h
--- linux-2.6.18-rc1/include/linux/raid/md_k.h	2006-07-15 22:34:43.733122942 +0000
+++ linux-2.6.18-rc2/include/linux/raid/md_k.h	2006-07-15 22:34:49.049700047 +0000
@@ -148,9 +148,10 @@
 
 	struct mdk_thread_s		*thread;	/* management thread */
 	struct mdk_thread_s		*sync_thread;	/* doing resync or reconstruct */
-	sector_t			curr_resync;	/* blocks scheduled */
+	sector_t			curr_resync;	/* last block scheduled */
 	unsigned long			resync_mark;	/* a recent timestamp */
 	sector_t			resync_mark_cnt;/* blocks written at resync_mark */
+	sector_t			curr_mark_cnt; /* blocks scheduled now */
 
 	sector_t			resync_max_sectors; /* may be set by personality */
 
diff -urN linux-2.6.18-rc1/include/linux/root_dev.h linux-2.6.18-rc2/include/linux/root_dev.h
--- linux-2.6.18-rc1/include/linux/root_dev.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/linux/root_dev.h	2006-07-15 22:34:49.053700481 +0000
@@ -2,6 +2,8 @@
 #define _ROOT_DEV_H_
 
 #include <linux/major.h>
+#include <linux/types.h>
+#include <linux/kdev_t.h>
 
 enum {
 	Root_NFS = MKDEV(UNNAMED_MAJOR, 255),
diff -urN linux-2.6.18-rc1/include/linux/rwsem.h linux-2.6.18-rc2/include/linux/rwsem.h
--- linux-2.6.18-rc1/include/linux/rwsem.h	2006-07-15 22:34:43.737123376 +0000
+++ linux-2.6.18-rc2/include/linux/rwsem.h	2006-07-15 22:34:49.053700481 +0000
@@ -61,12 +61,25 @@
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 /*
- * nested locking:
+ * nested locking. NOTE: rwsems are not allowed to recurse
+ * (which occurs if the same task tries to acquire the same
+ * lock instance multiple times), but multiple locks of the
+ * same lock class might be taken, if the order of the locks
+ * is always the same. This ordering rule can be expressed
+ * to lockdep via the _nested() APIs, but enumerating the
+ * subclasses that are used. (If the nesting relationship is
+ * static then another method for expressing nested locking is
+ * the explicit definition of lock class keys and the use of
+ * lockdep_set_class() at lock initialization time.
+ * See Documentation/lockdep-design.txt for more details.)
  */
 extern void down_read_nested(struct rw_semaphore *sem, int subclass);
 extern void down_write_nested(struct rw_semaphore *sem, int subclass);
 /*
- * Take/release a lock when not the owner will release it:
+ * Take/release a lock when not the owner will release it.
+ *
+ * [ This API should be avoided as much as possible - the
+ *   proper abstraction for this case is completions. ]
  */
 extern void down_read_non_owner(struct rw_semaphore *sem);
 extern void up_read_non_owner(struct rw_semaphore *sem);
diff -urN linux-2.6.18-rc1/include/linux/sched.h linux-2.6.18-rc2/include/linux/sched.h
--- linux-2.6.18-rc1/include/linux/sched.h	2006-07-15 22:34:43.737123376 +0000
+++ linux-2.6.18-rc2/include/linux/sched.h	2006-07-15 22:34:49.053700481 +0000
@@ -463,6 +463,10 @@
 #ifdef CONFIG_BSD_PROCESS_ACCT
 	struct pacct_struct pacct;	/* per-process accounting information */
 #endif
+#ifdef CONFIG_TASKSTATS
+	spinlock_t stats_lock;
+	struct taskstats *stats;
+#endif
 };
 
 /* Context switch must be unlocked if interrupts are to be enabled */
@@ -537,7 +541,7 @@
 struct backing_dev_info;
 struct reclaim_state;
 
-#ifdef CONFIG_SCHEDSTATS
+#if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
 struct sched_info {
 	/* cumulative counters */
 	unsigned long	cpu_time,	/* time spent on the cpu */
@@ -548,9 +552,53 @@
 	unsigned long	last_arrival,	/* when we last ran on a cpu */
 			last_queued;	/* when we were last queued to run */
 };
+#endif /* defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT) */
 
+#ifdef CONFIG_SCHEDSTATS
 extern struct file_operations proc_schedstat_operations;
+#endif /* CONFIG_SCHEDSTATS */
+
+#ifdef CONFIG_TASK_DELAY_ACCT
+struct task_delay_info {
+	spinlock_t	lock;
+	unsigned int	flags;	/* Private per-task flags */
+
+	/* For each stat XXX, add following, aligned appropriately
+	 *
+	 * struct timespec XXX_start, XXX_end;
+	 * u64 XXX_delay;
+	 * u32 XXX_count;
+	 *
+	 * Atomicity of updates to XXX_delay, XXX_count protected by
+	 * single lock above (split into XXX_lock if contention is an issue).
+	 */
+
+	/*
+	 * XXX_count is incremented on every XXX operation, the delay
+	 * associated with the operation is added to XXX_delay.
+	 * XXX_delay contains the accumulated delay time in nanoseconds.
+	 */
+	struct timespec blkio_start, blkio_end;	/* Shared by blkio, swapin */
+	u64 blkio_delay;	/* wait for sync block io completion */
+	u64 swapin_delay;	/* wait for swapin block io completion */
+	u32 blkio_count;	/* total count of the number of sync block */
+				/* io operations performed */
+	u32 swapin_count;	/* total count of the number of swapin block */
+				/* io operations performed */
+};
+#endif	/* CONFIG_TASK_DELAY_ACCT */
+
+static inline int sched_info_on(void)
+{
+#ifdef CONFIG_SCHEDSTATS
+	return 1;
+#elif defined(CONFIG_TASK_DELAY_ACCT)
+	extern int delayacct_on;
+	return delayacct_on;
+#else
+	return 0;
 #endif
+}
 
 enum idle_type
 {
@@ -747,7 +795,7 @@
 	cpumask_t cpus_allowed;
 	unsigned int time_slice, first_time_slice;
 
-#ifdef CONFIG_SCHEDSTATS
+#if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
 	struct sched_info sched_info;
 #endif
 
@@ -945,6 +993,10 @@
 	 * cache last used pipe for splice
 	 */
 	struct pipe_inode_info *splice_pipe;
+#ifdef	CONFIG_TASK_DELAY_ACCT
+	spinlock_t delays_lock;
+	struct task_delay_info *delays;
+#endif
 };
 
 static inline pid_t process_group(struct task_struct *tsk)
diff -urN linux-2.6.18-rc1/include/linux/serial_core.h linux-2.6.18-rc2/include/linux/serial_core.h
--- linux-2.6.18-rc1/include/linux/serial_core.h	2006-07-15 22:34:43.741123811 +0000
+++ linux-2.6.18-rc2/include/linux/serial_core.h	2006-07-15 22:34:49.057700915 +0000
@@ -227,6 +227,7 @@
 #define UPIO_MEM		(2)
 #define UPIO_MEM32		(3)
 #define UPIO_AU			(4)			/* Au1x00 type IO */
+#define UPIO_TSI		(5)			/* Tsi108/109 type IO */
 
 	unsigned int		read_status_mask;	/* driver specific */
 	unsigned int		ignore_status_mask;	/* driver specific */
diff -urN linux-2.6.18-rc1/include/linux/skbuff.h linux-2.6.18-rc2/include/linux/skbuff.h
--- linux-2.6.18-rc1/include/linux/skbuff.h	2006-07-15 22:34:43.741123811 +0000
+++ linux-2.6.18-rc2/include/linux/skbuff.h	2006-07-15 22:34:49.057700915 +0000
@@ -1455,5 +1455,10 @@
 { }
 #endif
 
+static inline int skb_is_gso(const struct sk_buff *skb)
+{
+	return skb_shinfo(skb)->gso_size;
+}
+
 #endif	/* __KERNEL__ */
 #endif	/* _LINUX_SKBUFF_H */
diff -urN linux-2.6.18-rc1/include/linux/taskstats.h linux-2.6.18-rc2/include/linux/taskstats.h
--- linux-2.6.18-rc1/include/linux/taskstats.h	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/include/linux/taskstats.h	2006-07-15 22:34:49.065701784 +0000
@@ -0,0 +1,137 @@
+/* taskstats.h - exporting per-task statistics
+ *
+ * Copyright (C) Shailabh Nagar, IBM Corp. 2006
+ *           (C) Balbir Singh,   IBM Corp. 2006
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _LINUX_TASKSTATS_H
+#define _LINUX_TASKSTATS_H
+
+/* Format for per-task data returned to userland when
+ *	- a task exits
+ *	- listener requests stats for a task
+ *
+ * The struct is versioned. Newer versions should only add fields to
+ * the bottom of the struct to maintain backward compatibility.
+ *
+ *
+ * To add new fields
+ *	a) bump up TASKSTATS_VERSION
+ *	b) add comment indicating new version number at end of struct
+ *	c) add new fields after version comment; maintain 64-bit alignment
+ */
+
+#define TASKSTATS_VERSION	1
+
+struct taskstats {
+
+	/* Version 1 */
+	__u16	version;
+	__u16	padding[3];	/* Userspace should not interpret the padding
+				 * field which can be replaced by useful
+				 * fields if struct taskstats is extended.
+				 */
+
+	/* Delay accounting fields start
+	 *
+	 * All values, until comment "Delay accounting fields end" are
+	 * available only if delay accounting is enabled, even though the last
+	 * few fields are not delays
+	 *
+	 * xxx_count is the number of delay values recorded
+	 * xxx_delay_total is the corresponding cumulative delay in nanoseconds
+	 *
+	 * xxx_delay_total wraps around to zero on overflow
+	 * xxx_count incremented regardless of overflow
+	 */
+
+	/* Delay waiting for cpu, while runnable
+	 * count, delay_total NOT updated atomically
+	 */
+	__u64	cpu_count;
+	__u64	cpu_delay_total;
+
+	/* Following four fields atomically updated using task->delays->lock */
+
+	/* Delay waiting for synchronous block I/O to complete
+	 * does not account for delays in I/O submission
+	 */
+	__u64	blkio_count;
+	__u64	blkio_delay_total;
+
+	/* Delay waiting for page fault I/O (swap in only) */
+	__u64	swapin_count;
+	__u64	swapin_delay_total;
+
+	/* cpu "wall-clock" running time
+	 * On some architectures, value will adjust for cpu time stolen
+	 * from the kernel in involuntary waits due to virtualization.
+	 * Value is cumulative, in nanoseconds, without a corresponding count
+	 * and wraps around to zero silently on overflow
+	 */
+	__u64	cpu_run_real_total;
+
+	/* cpu "virtual" running time
+	 * Uses time intervals seen by the kernel i.e. no adjustment
+	 * for kernel's involuntary waits due to virtualization.
+	 * Value is cumulative, in nanoseconds, without a corresponding count
+	 * and wraps around to zero silently on overflow
+	 */
+	__u64	cpu_run_virtual_total;
+	/* Delay accounting fields end */
+	/* version 1 ends here */
+};
+
+
+/*
+ * Commands sent from userspace
+ * Not versioned. New commands should only be inserted at the enum's end
+ * prior to __TASKSTATS_CMD_MAX
+ */
+
+enum {
+	TASKSTATS_CMD_UNSPEC = 0,	/* Reserved */
+	TASKSTATS_CMD_GET,		/* user->kernel request/get-response */
+	TASKSTATS_CMD_NEW,		/* kernel->user event */
+	__TASKSTATS_CMD_MAX,
+};
+
+#define TASKSTATS_CMD_MAX (__TASKSTATS_CMD_MAX - 1)
+
+enum {
+	TASKSTATS_TYPE_UNSPEC = 0,	/* Reserved */
+	TASKSTATS_TYPE_PID,		/* Process id */
+	TASKSTATS_TYPE_TGID,		/* Thread group id */
+	TASKSTATS_TYPE_STATS,		/* taskstats structure */
+	TASKSTATS_TYPE_AGGR_PID,	/* contains pid + stats */
+	TASKSTATS_TYPE_AGGR_TGID,	/* contains tgid + stats */
+	__TASKSTATS_TYPE_MAX,
+};
+
+#define TASKSTATS_TYPE_MAX (__TASKSTATS_TYPE_MAX - 1)
+
+enum {
+	TASKSTATS_CMD_ATTR_UNSPEC = 0,
+	TASKSTATS_CMD_ATTR_PID,
+	TASKSTATS_CMD_ATTR_TGID,
+	TASKSTATS_CMD_ATTR_REGISTER_CPUMASK,
+	TASKSTATS_CMD_ATTR_DEREGISTER_CPUMASK,
+	__TASKSTATS_CMD_ATTR_MAX,
+};
+
+#define TASKSTATS_CMD_ATTR_MAX (__TASKSTATS_CMD_ATTR_MAX - 1)
+
+/* NETLINK_GENERIC related info */
+
+#define TASKSTATS_GENL_NAME	"TASKSTATS"
+#define TASKSTATS_GENL_VERSION	0x1
+
+#endif /* _LINUX_TASKSTATS_H */
diff -urN linux-2.6.18-rc1/include/linux/taskstats_kern.h linux-2.6.18-rc2/include/linux/taskstats_kern.h
--- linux-2.6.18-rc1/include/linux/taskstats_kern.h	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/include/linux/taskstats_kern.h	2006-07-15 22:34:49.065701784 +0000
@@ -0,0 +1,89 @@
+/* taskstats_kern.h - kernel header for per-task statistics interface
+ *
+ * Copyright (C) Shailabh Nagar, IBM Corp. 2006
+ *           (C) Balbir Singh,   IBM Corp. 2006
+ */
+
+#ifndef _LINUX_TASKSTATS_KERN_H
+#define _LINUX_TASKSTATS_KERN_H
+
+#include <linux/taskstats.h>
+#include <linux/sched.h>
+#include <net/genetlink.h>
+
+#ifdef CONFIG_TASKSTATS
+extern kmem_cache_t *taskstats_cache;
+extern struct mutex taskstats_exit_mutex;
+
+static inline void taskstats_exit_free(struct taskstats *tidstats)
+{
+	if (tidstats)
+		kmem_cache_free(taskstats_cache, tidstats);
+}
+
+static inline void taskstats_tgid_init(struct signal_struct *sig)
+{
+	spin_lock_init(&sig->stats_lock);
+	sig->stats = NULL;
+}
+
+static inline void taskstats_tgid_alloc(struct signal_struct *sig)
+{
+	struct taskstats *stats;
+	unsigned long flags;
+
+	stats = kmem_cache_zalloc(taskstats_cache, SLAB_KERNEL);
+	if (!stats)
+		return;
+
+	spin_lock_irqsave(&sig->stats_lock, flags);
+	if (!sig->stats) {
+		sig->stats = stats;
+		stats = NULL;
+	}
+	spin_unlock_irqrestore(&sig->stats_lock, flags);
+
+	if (stats)
+		kmem_cache_free(taskstats_cache, stats);
+}
+
+static inline void taskstats_tgid_free(struct signal_struct *sig)
+{
+	struct taskstats *stats = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sig->stats_lock, flags);
+	if (sig->stats) {
+		stats = sig->stats;
+		sig->stats = NULL;
+	}
+	spin_unlock_irqrestore(&sig->stats_lock, flags);
+	if (stats)
+		kmem_cache_free(taskstats_cache, stats);
+}
+
+extern void taskstats_exit_alloc(struct taskstats **, unsigned int *);
+extern void taskstats_exit_send(struct task_struct *, struct taskstats *, int, unsigned int);
+extern void taskstats_init_early(void);
+extern void taskstats_tgid_alloc(struct signal_struct *);
+#else
+static inline void taskstats_exit_alloc(struct taskstats **ptidstats, unsigned int *mycpu)
+{}
+static inline void taskstats_exit_free(struct taskstats *ptidstats)
+{}
+static inline void taskstats_exit_send(struct task_struct *tsk,
+				       struct taskstats *tidstats,
+				       int group_dead, unsigned int cpu)
+{}
+static inline void taskstats_tgid_init(struct signal_struct *sig)
+{}
+static inline void taskstats_tgid_alloc(struct signal_struct *sig)
+{}
+static inline void taskstats_tgid_free(struct signal_struct *sig)
+{}
+static inline void taskstats_init_early(void)
+{}
+#endif /* CONFIG_TASKSTATS */
+
+#endif
+
diff -urN linux-2.6.18-rc1/include/linux/time.h linux-2.6.18-rc2/include/linux/time.h
--- linux-2.6.18-rc1/include/linux/time.h	2006-07-15 22:34:43.749124679 +0000
+++ linux-2.6.18-rc2/include/linux/time.h	2006-07-15 22:34:49.065701784 +0000
@@ -71,6 +71,18 @@
 extern void set_normalized_timespec(struct timespec *ts, time_t sec, long nsec);
 
 /*
+ * sub = lhs - rhs, in normalized form
+ */
+static inline struct timespec timespec_sub(struct timespec lhs,
+						struct timespec rhs)
+{
+	struct timespec ts_delta;
+	set_normalized_timespec(&ts_delta, lhs.tv_sec - rhs.tv_sec,
+				lhs.tv_nsec - rhs.tv_nsec);
+	return ts_delta;
+}
+
+/*
  * Returns true if the timespec is norm, false if denorm:
  */
 #define timespec_valid(ts) \
diff -urN linux-2.6.18-rc1/include/linux/tty.h linux-2.6.18-rc2/include/linux/tty.h
--- linux-2.6.18-rc1/include/linux/tty.h	2006-07-15 22:34:43.749124679 +0000
+++ linux-2.6.18-rc2/include/linux/tty.h	2006-07-15 22:34:49.065701784 +0000
@@ -5,16 +5,6 @@
  * 'tty.h' defines some structures used by tty_io.c and some defines.
  */
 
-/*
- * These constants are also useful for user-level apps (e.g., VC
- * resizing).
- */
-#define MIN_NR_CONSOLES 1       /* must be at least 1 */
-#define MAX_NR_CONSOLES	63	/* serial lines start at 64 */
-#define MAX_NR_USER_CONSOLES 63	/* must be root to allocate above this */
-		/* Note: the ioctl VT_GETSTATE does not work for
-		   consoles 16 and higher (since it returns a short) */
-
 #ifdef __KERNEL__
 #include <linux/fs.h>
 #include <linux/major.h>
@@ -22,7 +12,6 @@
 #include <linux/workqueue.h>
 #include <linux/tty_driver.h>
 #include <linux/tty_ldisc.h>
-#include <linux/screen_info.h>
 #include <linux/mutex.h>
 
 #include <asm/system.h>
@@ -270,7 +259,6 @@
 extern void tty_write_flush(struct tty_struct *);
 
 extern struct termios tty_std_termios;
-extern int fg_console, last_console, want_console;
 
 extern int kmsg_redirect;
 
diff -urN linux-2.6.18-rc1/include/linux/usb/serial.h linux-2.6.18-rc2/include/linux/usb/serial.h
--- linux-2.6.18-rc1/include/linux/usb/serial.h	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/include/linux/usb/serial.h	2006-07-15 22:34:49.069702218 +0000
@@ -0,0 +1,300 @@
+/*
+ * USB Serial Converter stuff
+ *
+ *	Copyright (C) 1999 - 2005
+ *	    Greg Kroah-Hartman (greg@kroah.com)
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; version 2 of the License.
+ *
+ */
+
+
+#ifndef __LINUX_USB_SERIAL_H
+#define __LINUX_USB_SERIAL_H
+
+#include <linux/kref.h>
+#include <linux/mutex.h>
+
+#define SERIAL_TTY_MAJOR	188	/* Nice legal number now */
+#define SERIAL_TTY_MINORS	255	/* loads of devices :) */
+
+#define MAX_NUM_PORTS		8	/* The maximum number of ports one device can grab at once */
+
+/* parity check flag */
+#define RELEVANT_IFLAG(iflag)	(iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+/**
+ * usb_serial_port: structure for the specific ports of a device.
+ * @serial: pointer back to the struct usb_serial owner of this port.
+ * @tty: pointer to the corresponding tty for this port.
+ * @lock: spinlock to grab when updating portions of this structure.
+ * @mutex: mutex used to synchronize serial_open() and serial_close()
+ *	access for this port.
+ * @number: the number of the port (the minor number).
+ * @interrupt_in_buffer: pointer to the interrupt in buffer for this port.
+ * @interrupt_in_urb: pointer to the interrupt in struct urb for this port.
+ * @interrupt_in_endpointAddress: endpoint address for the interrupt in pipe
+ *	for this port.
+ * @interrupt_out_buffer: pointer to the interrupt out buffer for this port.
+ * @interrupt_out_size: the size of the interrupt_out_buffer, in bytes.
+ * @interrupt_out_urb: pointer to the interrupt out struct urb for this port.
+ * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe
+ * 	for this port.
+ * @bulk_in_buffer: pointer to the bulk in buffer for this port.
+ * @read_urb: pointer to the bulk in struct urb for this port.
+ * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this
+ *	port.
+ * @bulk_out_buffer: pointer to the bulk out buffer for this port.
+ * @bulk_out_size: the size of the bulk_out_buffer, in bytes.
+ * @write_urb: pointer to the bulk out struct urb for this port.
+ * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this
+ *	port.
+ * @write_wait: a wait_queue_head_t used by the port.
+ * @work: work queue entry for the line discipline waking up.
+ * @open_count: number of times this port has been opened.
+ *
+ * This structure is used by the usb-serial core and drivers for the specific
+ * ports of a device.
+ */
+struct usb_serial_port {
+	struct usb_serial *	serial;
+	struct tty_struct *	tty;
+	spinlock_t		lock;
+	struct mutex            mutex;
+	unsigned char		number;
+
+	unsigned char *		interrupt_in_buffer;
+	struct urb *		interrupt_in_urb;
+	__u8			interrupt_in_endpointAddress;
+
+	unsigned char *		interrupt_out_buffer;
+	int			interrupt_out_size;
+	struct urb *		interrupt_out_urb;
+	__u8			interrupt_out_endpointAddress;
+
+	unsigned char *		bulk_in_buffer;
+	int			bulk_in_size;
+	struct urb *		read_urb;
+	__u8			bulk_in_endpointAddress;
+
+	unsigned char *		bulk_out_buffer;
+	int			bulk_out_size;
+	struct urb *		write_urb;
+	int			write_urb_busy;
+	__u8			bulk_out_endpointAddress;
+
+	wait_queue_head_t	write_wait;
+	struct work_struct	work;
+	int			open_count;
+	struct device		dev;
+};
+#define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev)
+
+/* get and set the port private data pointer helper functions */
+static inline void *usb_get_serial_port_data (struct usb_serial_port *port)
+{
+	return dev_get_drvdata(&port->dev);
+}
+
+static inline void usb_set_serial_port_data (struct usb_serial_port *port, void *data)
+{
+	dev_set_drvdata(&port->dev, data);
+}
+
+/**
+ * usb_serial - structure used by the usb-serial core for a device
+ * @dev: pointer to the struct usb_device for this device
+ * @type: pointer to the struct usb_serial_driver for this device
+ * @interface: pointer to the struct usb_interface for this device
+ * @minor: the starting minor number for this device
+ * @num_ports: the number of ports this device has
+ * @num_interrupt_in: number of interrupt in endpoints we have
+ * @num_interrupt_out: number of interrupt out endpoints we have
+ * @num_bulk_in: number of bulk in endpoints we have
+ * @num_bulk_out: number of bulk out endpoints we have
+ * @port: array of struct usb_serial_port structures for the different ports.
+ * @private: place to put any driver specific information that is needed.  The
+ *	usb-serial driver is required to manage this data, the usb-serial core
+ *	will not touch this.  Use usb_get_serial_data() and
+ *	usb_set_serial_data() to access this.
+ */
+struct usb_serial {
+	struct usb_device *		dev;
+	struct usb_serial_driver *	type;
+	struct usb_interface *		interface;
+	unsigned char			minor;
+	unsigned char			num_ports;
+	unsigned char			num_port_pointers;
+	char				num_interrupt_in;
+	char				num_interrupt_out;
+	char				num_bulk_in;
+	char				num_bulk_out;
+	struct usb_serial_port *	port[MAX_NUM_PORTS];
+	struct kref			kref;
+	void *				private;
+};
+#define to_usb_serial(d) container_of(d, struct usb_serial, kref)
+
+#define NUM_DONT_CARE	(-1)
+
+/* get and set the serial private data pointer helper functions */
+static inline void *usb_get_serial_data (struct usb_serial *serial)
+{
+	return serial->private;
+}
+
+static inline void usb_set_serial_data (struct usb_serial *serial, void *data)
+{
+	serial->private = data;
+}
+
+/**
+ * usb_serial_driver - describes a usb serial driver
+ * @description: pointer to a string that describes this driver.  This string used
+ *	in the syslog messages when a device is inserted or removed.
+ * @id_table: pointer to a list of usb_device_id structures that define all
+ *	of the devices this structure can support.
+ * @num_interrupt_in: the number of interrupt in endpoints this device will
+ *	have.
+ * @num_interrupt_out: the number of interrupt out endpoints this device will
+ *	have.
+ * @num_bulk_in: the number of bulk in endpoints this device will have.
+ * @num_bulk_out: the number of bulk out endpoints this device will have.
+ * @num_ports: the number of different ports this device will have.
+ * @calc_num_ports: pointer to a function to determine how many ports this
+ *	device has dynamically.  It will be called after the probe()
+ *	callback is called, but before attach()
+ * @probe: pointer to the driver's probe function.
+ *	This will be called when the device is inserted into the system,
+ *	but before the device has been fully initialized by the usb_serial
+ *	subsystem.  Use this function to download any firmware to the device,
+ *	or any other early initialization that might be needed.
+ *	Return 0 to continue on with the initialization sequence.  Anything
+ *	else will abort it.
+ * @attach: pointer to the driver's attach function.
+ *	This will be called when the struct usb_serial structure is fully set
+ *	set up.  Do any local initialization of the device, or any private
+ *	memory structure allocation at this point in time.
+ * @shutdown: pointer to the driver's shutdown function.  This will be
+ *	called when the device is removed from the system.
+ *
+ * This structure is defines a USB Serial driver.  It provides all of
+ * the information that the USB serial core code needs.  If the function
+ * pointers are defined, then the USB serial core code will call them when
+ * the corresponding tty port functions are called.  If they are not
+ * called, the generic serial function will be used instead.
+ *
+ * The driver.owner field should be set to the module owner of this driver.
+ * The driver.name field should be set to the name of this driver (remember
+ * it will show up in sysfs, so it needs to be short and to the point.
+ * Useing the module name is a good idea.)
+ */
+struct usb_serial_driver {
+	const char *description;
+	const struct usb_device_id *id_table;
+	char	num_interrupt_in;
+	char	num_interrupt_out;
+	char	num_bulk_in;
+	char	num_bulk_out;
+	char	num_ports;
+
+	struct list_head	driver_list;
+	struct device_driver	driver;
+
+	int (*probe) (struct usb_serial *serial, const struct usb_device_id *id);
+	int (*attach) (struct usb_serial *serial);
+	int (*calc_num_ports) (struct usb_serial *serial);
+
+	void (*shutdown) (struct usb_serial *serial);
+
+	int (*port_probe) (struct usb_serial_port *port);
+	int (*port_remove) (struct usb_serial_port *port);
+
+	/* serial function calls */
+	int  (*open)		(struct usb_serial_port *port, struct file * filp);
+	void (*close)		(struct usb_serial_port *port, struct file * filp);
+	int  (*write)		(struct usb_serial_port *port, const unsigned char *buf, int count);
+	int  (*write_room)	(struct usb_serial_port *port);
+	int  (*ioctl)		(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
+	void (*set_termios)	(struct usb_serial_port *port, struct termios * old);
+	void (*break_ctl)	(struct usb_serial_port *port, int break_state);
+	int  (*chars_in_buffer)	(struct usb_serial_port *port);
+	void (*throttle)	(struct usb_serial_port *port);
+	void (*unthrottle)	(struct usb_serial_port *port);
+	int  (*tiocmget)	(struct usb_serial_port *port, struct file *file);
+	int  (*tiocmset)	(struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
+
+	void (*read_int_callback)(struct urb *urb, struct pt_regs *regs);
+	void (*write_int_callback)(struct urb *urb, struct pt_regs *regs);
+	void (*read_bulk_callback)(struct urb *urb, struct pt_regs *regs);
+	void (*write_bulk_callback)(struct urb *urb, struct pt_regs *regs);
+};
+#define to_usb_serial_driver(d) container_of(d, struct usb_serial_driver, driver)
+
+extern int  usb_serial_register(struct usb_serial_driver *driver);
+extern void usb_serial_deregister(struct usb_serial_driver *driver);
+extern void usb_serial_port_softint(struct usb_serial_port *port);
+
+extern int usb_serial_probe(struct usb_interface *iface, const struct usb_device_id *id);
+extern void usb_serial_disconnect(struct usb_interface *iface);
+
+extern int ezusb_writememory (struct usb_serial *serial, int address, unsigned char *data, int length, __u8 bRequest);
+extern int ezusb_set_reset (struct usb_serial *serial, unsigned char reset_bit);
+
+/* USB Serial console functions */
+#ifdef CONFIG_USB_SERIAL_CONSOLE
+extern void usb_serial_console_init (int debug, int minor);
+extern void usb_serial_console_exit (void);
+extern void usb_serial_console_disconnect(struct usb_serial *serial);
+#else
+static inline void usb_serial_console_init (int debug, int minor) { }
+static inline void usb_serial_console_exit (void) { }
+static inline void usb_serial_console_disconnect(struct usb_serial *serial) {}
+#endif
+
+/* Functions needed by other parts of the usbserial core */
+extern struct usb_serial *usb_serial_get_by_index (unsigned int minor);
+extern void usb_serial_put(struct usb_serial *serial);
+extern int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp);
+extern int usb_serial_generic_write (struct usb_serial_port *port, const unsigned char *buf, int count);
+extern void usb_serial_generic_close (struct usb_serial_port *port, struct file *filp);
+extern int usb_serial_generic_write_room (struct usb_serial_port *port);
+extern int usb_serial_generic_chars_in_buffer (struct usb_serial_port *port);
+extern void usb_serial_generic_read_bulk_callback (struct urb *urb, struct pt_regs *regs);
+extern void usb_serial_generic_write_bulk_callback (struct urb *urb, struct pt_regs *regs);
+extern void usb_serial_generic_shutdown (struct usb_serial *serial);
+extern int usb_serial_generic_register (int debug);
+extern void usb_serial_generic_deregister (void);
+
+extern int usb_serial_bus_register (struct usb_serial_driver *device);
+extern void usb_serial_bus_deregister (struct usb_serial_driver *device);
+
+extern struct usb_serial_driver usb_serial_generic_device;
+extern struct bus_type usb_serial_bus_type;
+extern struct tty_driver *usb_serial_tty_driver;
+
+static inline void usb_serial_debug_data(int debug,
+					 struct device *dev,
+					 const char *function, int size,
+					 const unsigned char *data)
+{
+	int i;
+
+	if (debug) {
+		dev_printk(KERN_DEBUG, dev, "%s - length = %d, data = ", function, size);
+		for (i = 0; i < size; ++i)
+			printk ("%.2x ", data[i]);
+		printk ("\n");
+	}
+}
+
+/* Use our own dbg macro */
+#undef dbg
+#define dbg(format, arg...) do { if (debug) printk(KERN_DEBUG "%s: " format "\n" , __FILE__ , ## arg); } while (0)
+
+
+
+#endif	/* ifdef __LINUX_USB_SERIAL_H */
+
diff -urN linux-2.6.18-rc1/include/linux/usb.h linux-2.6.18-rc2/include/linux/usb.h
--- linux-2.6.18-rc1/include/linux/usb.h	2006-07-15 22:34:43.753125113 +0000
+++ linux-2.6.18-rc2/include/linux/usb.h	2006-07-15 22:34:49.069702218 +0000
@@ -48,7 +48,7 @@
  * @urb_list: urbs queued to this endpoint; maintained by usbcore
  * @hcpriv: for use by HCD; typically holds hardware dma queue head (QH)
  *	with one or more transfer descriptors (TDs) per urb
- * @kobj: kobject for sysfs info
+ * @ep_dev: ep_device for sysfs info
  * @extra: descriptors following this endpoint in the configuration
  * @extralen: how many bytes of "extra" are valid
  *
diff -urN linux-2.6.18-rc1/include/linux/usb_ch9.h linux-2.6.18-rc2/include/linux/usb_ch9.h
--- linux-2.6.18-rc1/include/linux/usb_ch9.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/linux/usb_ch9.h	2006-07-15 22:34:49.069702218 +0000
@@ -51,6 +51,9 @@
 #define USB_RECIP_INTERFACE		0x01
 #define USB_RECIP_ENDPOINT		0x02
 #define USB_RECIP_OTHER			0x03
+/* From Wireless USB 1.0 */
+#define USB_RECIP_PORT 			0x04
+#define USB_RECIP_RPIPE 		0x05
 
 /*
  * Standard requests, for the bRequest field of a SETUP packet.
@@ -73,7 +76,9 @@
 
 #define USB_REQ_SET_ENCRYPTION		0x0D	/* Wireless USB */
 #define USB_REQ_GET_ENCRYPTION		0x0E
+#define USB_REQ_RPIPE_ABORT		0x0E
 #define USB_REQ_SET_HANDSHAKE		0x0F
+#define USB_REQ_RPIPE_RESET		0x0F
 #define USB_REQ_GET_HANDSHAKE		0x10
 #define USB_REQ_SET_CONNECTION		0x11
 #define USB_REQ_SET_SECURITY_DATA	0x12
@@ -159,6 +164,8 @@
 #define USB_DT_BOS			0x0f
 #define USB_DT_DEVICE_CAPABILITY	0x10
 #define USB_DT_WIRELESS_ENDPOINT_COMP	0x11
+#define USB_DT_WIRE_ADAPTER		0x21
+#define USB_DT_RPIPE			0x22
 
 /* conventional codes for class-specific descriptors */
 #define USB_DT_CS_DEVICE		0x21
diff -urN linux-2.6.18-rc1/include/linux/usb_gadget.h linux-2.6.18-rc2/include/linux/usb_gadget.h
--- linux-2.6.18-rc1/include/linux/usb_gadget.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/linux/usb_gadget.h	2006-07-15 22:34:49.069702218 +0000
@@ -872,9 +872,9 @@
 /* utility wrapping a simple endpoint selection policy */
 
 extern struct usb_ep *usb_ep_autoconfig (struct usb_gadget *,
-			struct usb_endpoint_descriptor *) __init;
+			struct usb_endpoint_descriptor *) __devinit;
 
-extern void usb_ep_autoconfig_reset (struct usb_gadget *) __init;
+extern void usb_ep_autoconfig_reset (struct usb_gadget *) __devinit;
 
 #endif  /* __KERNEL__ */
 
diff -urN linux-2.6.18-rc1/include/linux/usb_usual.h linux-2.6.18-rc2/include/linux/usb_usual.h
--- linux-2.6.18-rc1/include/linux/usb_usual.h	2006-07-15 22:34:43.757125548 +0000
+++ linux-2.6.18-rc2/include/linux/usb_usual.h	2006-07-15 22:34:49.073702652 +0000
@@ -43,6 +43,8 @@
 		/* Need delay after Command phase */		\
 	US_FLAG(NO_WP_DETECT,	0x00000200)			\
 		/* Don't check for write-protect */		\
+	US_FLAG(MAX_SECTORS_64,	0x00000400)			\
+		/* Sets max_sectors to 64    */
 
 #define US_FLAG(name, value)	US_FL_##name = value ,
 enum { US_DO_ALL_FLAGS };
diff -urN linux-2.6.18-rc1/include/linux/vmalloc.h linux-2.6.18-rc2/include/linux/vmalloc.h
--- linux-2.6.18-rc1/include/linux/vmalloc.h	2006-07-15 22:34:43.757125548 +0000
+++ linux-2.6.18-rc2/include/linux/vmalloc.h	2006-07-15 22:34:49.073702652 +0000
@@ -11,6 +11,7 @@
 #define VM_ALLOC	0x00000002	/* vmalloc() */
 #define VM_MAP		0x00000004	/* vmap()ed pages */
 #define VM_USERMAP	0x00000008	/* suitable for remap_vmalloc_range */
+#define VM_VPAGES	0x00000010	/* buffer for pages was vmalloc'ed */
 /* bits [20..32] reserved for arch specific ioremap internals */
 
 /*
diff -urN linux-2.6.18-rc1/include/linux/vmstat.h linux-2.6.18-rc2/include/linux/vmstat.h
--- linux-2.6.18-rc1/include/linux/vmstat.h	2006-07-15 22:34:43.757125548 +0000
+++ linux-2.6.18-rc2/include/linux/vmstat.h	2006-07-15 22:34:49.073702652 +0000
@@ -57,7 +57,7 @@
 
 static inline void count_vm_events(enum vm_event_item item, long delta)
 {
-	get_cpu_var(vm_event_states.event[item])++;
+	get_cpu_var(vm_event_states.event[item]) += delta;
 	put_cpu();
 }
 
@@ -186,11 +186,16 @@
 	zone_page_state_add(delta, zone, item);
 }
 
+static inline void __inc_zone_state(struct zone *zone, enum zone_stat_item item)
+{
+	atomic_long_inc(&zone->vm_stat[item]);
+	atomic_long_inc(&vm_stat[item]);
+}
+
 static inline void __inc_zone_page_state(struct page *page,
 			enum zone_stat_item item)
 {
-	atomic_long_inc(&page_zone(page)->vm_stat[item]);
-	atomic_long_inc(&vm_stat[item]);
+	__inc_zone_state(page_zone(page), item);
 }
 
 static inline void __dec_zone_page_state(struct page *page,
diff -urN linux-2.6.18-rc1/include/linux/vt.h linux-2.6.18-rc2/include/linux/vt.h
--- linux-2.6.18-rc1/include/linux/vt.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/linux/vt.h	2006-07-15 22:34:49.073702652 +0000
@@ -1,6 +1,16 @@
 #ifndef _LINUX_VT_H
 #define _LINUX_VT_H
 
+/*
+ * These constants are also useful for user-level apps (e.g., VC
+ * resizing).
+ */
+#define MIN_NR_CONSOLES 1       /* must be at least 1 */
+#define MAX_NR_CONSOLES	63	/* serial lines start at 64 */
+#define MAX_NR_USER_CONSOLES 63	/* must be root to allocate above this */
+		/* Note: the ioctl VT_GETSTATE does not work for
+		   consoles 16 and higher (since it returns a short) */
+
 /* 0x56 is 'V', to avoid collision with termios and kd */
 
 #define VT_OPENQRY	0x5600	/* find available vt */
diff -urN linux-2.6.18-rc1/include/linux/vt_kern.h linux-2.6.18-rc2/include/linux/vt_kern.h
--- linux-2.6.18-rc1/include/linux/vt_kern.h	2006-07-15 22:34:43.757125548 +0000
+++ linux-2.6.18-rc2/include/linux/vt_kern.h	2006-07-15 22:34:49.073702652 +0000
@@ -26,6 +26,7 @@
 
 extern void kd_mksound(unsigned int hz, unsigned int ticks);
 extern int kbd_rate(struct kbd_repeat *rep);
+extern int fg_console, last_console, want_console;
 
 /* console.c */
 
diff -urN linux-2.6.18-rc1/include/linux/wait.h linux-2.6.18-rc2/include/linux/wait.h
--- linux-2.6.18-rc1/include/linux/wait.h	2006-07-15 22:34:43.757125548 +0000
+++ linux-2.6.18-rc2/include/linux/wait.h	2006-07-15 22:34:49.073702652 +0000
@@ -77,17 +77,7 @@
 #define __WAIT_BIT_KEY_INITIALIZER(word, bit)				\
 	{ .flags = word, .bit_nr = bit, }
 
-/*
- * lockdep: we want one lock-class for all waitqueue locks.
- */
-extern struct lock_class_key waitqueue_lock_key;
-
-static inline void init_waitqueue_head(wait_queue_head_t *q)
-{
-	spin_lock_init(&q->lock);
-	lockdep_set_class(&q->lock, &waitqueue_lock_key);
-	INIT_LIST_HEAD(&q->task_list);
-}
+extern void init_waitqueue_head(wait_queue_head_t *q);
 
 static inline void init_waitqueue_entry(wait_queue_t *q, struct task_struct *p)
 {
diff -urN linux-2.6.18-rc1/include/net/genetlink.h linux-2.6.18-rc2/include/net/genetlink.h
--- linux-2.6.18-rc1/include/net/genetlink.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/net/genetlink.h	2006-07-15 22:34:49.081703521 +0000
@@ -150,4 +150,24 @@
 	return nlmsg_unicast(genl_sock, skb, pid);
 }
 
+/**
+ * gennlmsg_data - head of message payload
+ * @gnlh: genetlink messsage header
+ */
+static inline void *genlmsg_data(const struct genlmsghdr *gnlh)
+{
+	return ((unsigned char *) gnlh + GENL_HDRLEN);
+}
+
+/**
+ * genlmsg_len - length of message payload
+ * @gnlh: genetlink message header
+ */
+static inline int genlmsg_len(const struct genlmsghdr *gnlh)
+{
+	struct nlmsghdr *nlh = (struct nlmsghdr *)((unsigned char *)gnlh -
+							NLMSG_HDRLEN);
+	return (nlh->nlmsg_len - GENL_HDRLEN - NLMSG_HDRLEN);
+}
+
 #endif	/* __NET_GENERIC_NETLINK_H */
diff -urN linux-2.6.18-rc1/include/net/protocol.h linux-2.6.18-rc2/include/net/protocol.h
--- linux-2.6.18-rc1/include/net/protocol.h	2006-07-15 22:34:43.769126850 +0000
+++ linux-2.6.18-rc2/include/net/protocol.h	2006-07-15 22:34:49.089704389 +0000
@@ -36,6 +36,7 @@
 struct net_protocol {
 	int			(*handler)(struct sk_buff *skb);
 	void			(*err_handler)(struct sk_buff *skb, u32 info);
+	int			(*gso_send_check)(struct sk_buff *skb);
 	struct sk_buff	       *(*gso_segment)(struct sk_buff *skb,
 					       int features);
 	int			no_policy;
@@ -51,6 +52,7 @@
 			       int type, int code, int offset,
 			       __u32 info);
 
+	int	(*gso_send_check)(struct sk_buff *skb);
 	struct sk_buff *(*gso_segment)(struct sk_buff *skb,
 				       int features);
 
diff -urN linux-2.6.18-rc1/include/net/tcp.h linux-2.6.18-rc2/include/net/tcp.h
--- linux-2.6.18-rc1/include/net/tcp.h	2006-07-15 22:34:43.773127284 +0000
+++ linux-2.6.18-rc2/include/net/tcp.h	2006-07-15 22:34:49.089704389 +0000
@@ -1086,6 +1086,7 @@
 
 extern int tcp_v4_destroy_sock(struct sock *sk);
 
+extern int tcp_v4_gso_send_check(struct sk_buff *skb);
 extern struct sk_buff *tcp_tso_segment(struct sk_buff *skb, int features);
 
 #ifdef CONFIG_PROC_FS
diff -urN linux-2.6.18-rc1/include/rdma/ib_addr.h linux-2.6.18-rc2/include/rdma/ib_addr.h
--- linux-2.6.18-rc1/include/rdma/ib_addr.h	2006-07-15 22:34:43.773127284 +0000
+++ linux-2.6.18-rc2/include/rdma/ib_addr.h	2006-07-15 22:34:49.093704823 +0000
@@ -89,9 +89,10 @@
 	dev_addr->broadcast[9] = (unsigned char) pkey;
 }
 
-static inline union ib_gid *ib_addr_get_sgid(struct rdma_dev_addr *dev_addr)
+static inline void ib_addr_get_sgid(struct rdma_dev_addr *dev_addr,
+				    union ib_gid *gid)
 {
-	return 	(union ib_gid *) (dev_addr->src_dev_addr + 4);
+	memcpy(gid, dev_addr->src_dev_addr + 4, sizeof *gid);
 }
 
 static inline void ib_addr_set_sgid(struct rdma_dev_addr *dev_addr,
@@ -100,9 +101,10 @@
 	memcpy(dev_addr->src_dev_addr + 4, gid, sizeof *gid);
 }
 
-static inline union ib_gid *ib_addr_get_dgid(struct rdma_dev_addr *dev_addr)
+static inline void ib_addr_get_dgid(struct rdma_dev_addr *dev_addr,
+				    union ib_gid *gid)
 {
-	return 	(union ib_gid *) (dev_addr->dst_dev_addr + 4);
+	memcpy(gid, dev_addr->dst_dev_addr + 4, sizeof *gid);
 }
 
 static inline void ib_addr_set_dgid(struct rdma_dev_addr *dev_addr,
diff -urN linux-2.6.18-rc1/include/rdma/ib_fmr_pool.h linux-2.6.18-rc2/include/rdma/ib_fmr_pool.h
--- linux-2.6.18-rc1/include/rdma/ib_fmr_pool.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/rdma/ib_fmr_pool.h	2006-07-15 22:34:49.093704823 +0000
@@ -88,7 +88,7 @@
 struct ib_pool_fmr *ib_fmr_pool_map_phys(struct ib_fmr_pool *pool_handle,
 					 u64                *page_list,
 					 int                 list_len,
-					 u64                *io_virtual_address);
+					 u64                 io_virtual_address);
 
 int ib_fmr_pool_unmap(struct ib_pool_fmr *fmr);
 
diff -urN linux-2.6.18-rc1/include/sound/core.h linux-2.6.18-rc2/include/sound/core.h
--- linux-2.6.18-rc1/include/sound/core.h	2006-07-15 22:34:43.781128153 +0000
+++ linux-2.6.18-rc2/include/sound/core.h	2006-07-15 22:34:49.101705692 +0000
@@ -188,8 +188,6 @@
 	int device;			/* device number */
 	const struct file_operations *f_ops;	/* file operations */
 	void *private_data;		/* private data for f_ops->open */
-	char name[0];			/* device name (keep at the end of
-								structure) */
 };
 
 /* sound.c */
diff -urN linux-2.6.18-rc1/include/sound/cs46xx.h linux-2.6.18-rc2/include/sound/cs46xx.h
--- linux-2.6.18-rc1/include/sound/cs46xx.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/include/sound/cs46xx.h	2006-07-15 22:34:49.101705692 +0000
@@ -1704,6 +1704,7 @@
 	int acpi_port;
 	struct snd_kcontrol *eapd_switch; /* for amplifier hack */
 	int accept_valid;	/* accept mmap valid (for OSS) */
+	int in_suspend;
 
 	struct gameport *gameport;
 
diff -urN linux-2.6.18-rc1/include/video/mbxfb.h linux-2.6.18-rc2/include/video/mbxfb.h
--- linux-2.6.18-rc1/include/video/mbxfb.h	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/include/video/mbxfb.h	2006-07-15 22:34:49.105706126 +0000
@@ -0,0 +1,28 @@
+#ifndef __MBX_FB_H
+#define __MBX_FB_H
+
+struct mbxfb_val {
+	unsigned int	defval;
+	unsigned int	min;
+	unsigned int	max;
+};
+
+struct fb_info;
+
+struct mbxfb_platform_data {
+		/* Screen info */
+		struct mbxfb_val xres;
+		struct mbxfb_val yres;
+		struct mbxfb_val bpp;
+
+		/* Memory info */
+		unsigned long memsize; /* if 0 use ODFB? */
+		unsigned long timings1;
+		unsigned long timings2;
+		unsigned long timings3;
+
+		int (*probe)(struct fb_info *fb);
+		int (*remove)(struct fb_info *fb);
+};
+
+#endif /* __MBX_FB_H */
diff -urN linux-2.6.18-rc1/init/Kconfig linux-2.6.18-rc2/init/Kconfig
--- linux-2.6.18-rc1/init/Kconfig	2006-07-15 22:34:43.785128587 +0000
+++ linux-2.6.18-rc2/init/Kconfig	2006-07-15 22:34:49.105706126 +0000
@@ -158,6 +158,30 @@
 	  for processing it. A preliminary version of these tools is available
 	  at <http://www.physik3.uni-rostock.de/tim/kernel/utils/acct/>.
 
+config TASKSTATS
+	bool "Export task/process statistics through netlink (EXPERIMENTAL)"
+	depends on NET
+	default n
+	help
+	  Export selected statistics for tasks/processes through the
+	  generic netlink interface. Unlike BSD process accounting, the
+	  statistics are available during the lifetime of tasks/processes as
+	  responses to commands. Like BSD accounting, they are sent to user
+	  space on task exit.
+
+	  Say N if unsure.
+
+config TASK_DELAY_ACCT
+	bool "Enable per-task delay accounting (EXPERIMENTAL)"
+	depends on TASKSTATS
+	help
+	  Collect information on time spent by a task waiting for system
+	  resources like cpu, synchronous block I/O completion and swapping
+	  in pages. Such statistics can help in setting a task's priorities
+	  relative to other tasks for cpu, io, rss limits etc.
+
+	  Say N if unsure.
+
 config SYSCTL
 	bool "Sysctl support" if EMBEDDED
 	default y
diff -urN linux-2.6.18-rc1/init/main.c linux-2.6.18-rc2/init/main.c
--- linux-2.6.18-rc1/init/main.c	2006-07-15 22:34:43.789129021 +0000
+++ linux-2.6.18-rc2/init/main.c	2006-07-15 22:34:49.109706560 +0000
@@ -41,6 +41,8 @@
 #include <linux/cpu.h>
 #include <linux/cpuset.h>
 #include <linux/efi.h>
+#include <linux/taskstats_kern.h>
+#include <linux/delayacct.h>
 #include <linux/unistd.h>
 #include <linux/rmap.h>
 #include <linux/mempolicy.h>
@@ -574,6 +576,8 @@
 	proc_root_init();
 #endif
 	cpuset_init();
+	taskstats_init_early();
+	delayacct_init();
 
 	check_bugs();
 
diff -urN linux-2.6.18-rc1/kernel/Makefile linux-2.6.18-rc2/kernel/Makefile
--- linux-2.6.18-rc1/kernel/Makefile	2006-07-15 22:34:43.789129021 +0000
+++ linux-2.6.18-rc2/kernel/Makefile	2006-07-15 22:34:49.109706560 +0000
@@ -48,6 +48,8 @@
 obj-$(CONFIG_SECCOMP) += seccomp.o
 obj-$(CONFIG_RCU_TORTURE_TEST) += rcutorture.o
 obj-$(CONFIG_RELAY) += relay.o
+obj-$(CONFIG_TASK_DELAY_ACCT) += delayacct.o
+obj-$(CONFIG_TASKSTATS) += taskstats.o
 
 ifneq ($(CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER),y)
 # According to Alan Modra <alan@linuxcare.com.au>, the -fno-omit-frame-pointer is
diff -urN linux-2.6.18-rc1/kernel/acct.c linux-2.6.18-rc2/kernel/acct.c
--- linux-2.6.18-rc1/kernel/acct.c	2006-07-15 22:34:43.793129456 +0000
+++ linux-2.6.18-rc2/kernel/acct.c	2006-07-15 22:34:49.109706560 +0000
@@ -488,7 +488,7 @@
 		old_encode_dev(tty_devnum(current->signal->tty)) : 0;
 	read_unlock(&tasklist_lock);
 
-	spin_lock(&current->sighand->siglock);
+	spin_lock_irq(&current->sighand->siglock);
 	ac.ac_utime = encode_comp_t(jiffies_to_AHZ(cputime_to_jiffies(pacct->ac_utime)));
 	ac.ac_stime = encode_comp_t(jiffies_to_AHZ(cputime_to_jiffies(pacct->ac_stime)));
 	ac.ac_flag = pacct->ac_flag;
@@ -496,7 +496,7 @@
 	ac.ac_minflt = encode_comp_t(pacct->ac_minflt);
 	ac.ac_majflt = encode_comp_t(pacct->ac_majflt);
 	ac.ac_exitcode = pacct->ac_exitcode;
-	spin_unlock(&current->sighand->siglock);
+	spin_unlock_irq(&current->sighand->siglock);
 	ac.ac_io = encode_comp_t(0 /* current->io_usage */);	/* %% */
 	ac.ac_rw = encode_comp_t(ac.ac_io / 1024);
 	ac.ac_swaps = encode_comp_t(0);
diff -urN linux-2.6.18-rc1/kernel/delayacct.c linux-2.6.18-rc2/kernel/delayacct.c
--- linux-2.6.18-rc1/kernel/delayacct.c	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/kernel/delayacct.c	2006-07-15 22:34:49.117707429 +0000
@@ -0,0 +1,178 @@
+/* delayacct.c - per-task delay accounting
+ *
+ * Copyright (C) Shailabh Nagar, IBM Corp. 2006
+ *
+ * This program is free software;  you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+#include <linux/sysctl.h>
+#include <linux/delayacct.h>
+
+int delayacct_on __read_mostly;	/* Delay accounting turned on/off */
+kmem_cache_t *delayacct_cache;
+
+static int __init delayacct_setup_enable(char *str)
+{
+	delayacct_on = 1;
+	return 1;
+}
+__setup("delayacct", delayacct_setup_enable);
+
+void delayacct_init(void)
+{
+	delayacct_cache = kmem_cache_create("delayacct_cache",
+					sizeof(struct task_delay_info),
+					0,
+					SLAB_PANIC,
+					NULL, NULL);
+	delayacct_tsk_init(&init_task);
+}
+
+void __delayacct_tsk_init(struct task_struct *tsk)
+{
+	spin_lock_init(&tsk->delays_lock);
+	/* No need to acquire tsk->delays_lock for allocation here unless
+	   __delayacct_tsk_init called after tsk is attached to tasklist
+	*/
+	tsk->delays = kmem_cache_zalloc(delayacct_cache, SLAB_KERNEL);
+	if (tsk->delays)
+		spin_lock_init(&tsk->delays->lock);
+}
+
+void __delayacct_tsk_exit(struct task_struct *tsk)
+{
+	struct task_delay_info *delays = tsk->delays;
+	spin_lock(&tsk->delays_lock);
+	tsk->delays = NULL;
+	spin_unlock(&tsk->delays_lock);
+	kmem_cache_free(delayacct_cache, delays);
+}
+
+/*
+ * Start accounting for a delay statistic using
+ * its starting timestamp (@start)
+ */
+
+static inline void delayacct_start(struct timespec *start)
+{
+	do_posix_clock_monotonic_gettime(start);
+}
+
+/*
+ * Finish delay accounting for a statistic using
+ * its timestamps (@start, @end), accumalator (@total) and @count
+ */
+
+static void delayacct_end(struct timespec *start, struct timespec *end,
+				u64 *total, u32 *count)
+{
+	struct timespec ts;
+	s64 ns;
+
+	do_posix_clock_monotonic_gettime(end);
+	ts = timespec_sub(*end, *start);
+	ns = timespec_to_ns(&ts);
+	if (ns < 0)
+		return;
+
+	spin_lock(&current->delays->lock);
+	*total += ns;
+	(*count)++;
+	spin_unlock(&current->delays->lock);
+}
+
+void __delayacct_blkio_start(void)
+{
+	delayacct_start(&current->delays->blkio_start);
+}
+
+void __delayacct_blkio_end(void)
+{
+	if (current->delays->flags & DELAYACCT_PF_SWAPIN)
+		/* Swapin block I/O */
+		delayacct_end(&current->delays->blkio_start,
+			&current->delays->blkio_end,
+			&current->delays->swapin_delay,
+			&current->delays->swapin_count);
+	else	/* Other block I/O */
+		delayacct_end(&current->delays->blkio_start,
+			&current->delays->blkio_end,
+			&current->delays->blkio_delay,
+			&current->delays->blkio_count);
+}
+
+int __delayacct_add_tsk(struct taskstats *d, struct task_struct *tsk)
+{
+	s64 tmp;
+	struct timespec ts;
+	unsigned long t1,t2,t3;
+
+	spin_lock(&tsk->delays_lock);
+
+	/* Though tsk->delays accessed later, early exit avoids
+	 * unnecessary returning of other data
+	 */
+	if (!tsk->delays)
+		goto done;
+
+	tmp = (s64)d->cpu_run_real_total;
+	cputime_to_timespec(tsk->utime + tsk->stime, &ts);
+	tmp += timespec_to_ns(&ts);
+	d->cpu_run_real_total = (tmp < (s64)d->cpu_run_real_total) ? 0 : tmp;
+
+	/*
+	 * No locking available for sched_info (and too expensive to add one)
+	 * Mitigate by taking snapshot of values
+	 */
+	t1 = tsk->sched_info.pcnt;
+	t2 = tsk->sched_info.run_delay;
+	t3 = tsk->sched_info.cpu_time;
+
+	d->cpu_count += t1;
+
+	jiffies_to_timespec(t2, &ts);
+	tmp = (s64)d->cpu_delay_total + timespec_to_ns(&ts);
+	d->cpu_delay_total = (tmp < (s64)d->cpu_delay_total) ? 0 : tmp;
+
+	tmp = (s64)d->cpu_run_virtual_total + (s64)jiffies_to_usecs(t3) * 1000;
+	d->cpu_run_virtual_total =
+		(tmp < (s64)d->cpu_run_virtual_total) ?	0 : tmp;
+
+	/* zero XXX_total, non-zero XXX_count implies XXX stat overflowed */
+
+	spin_lock(&tsk->delays->lock);
+	tmp = d->blkio_delay_total + tsk->delays->blkio_delay;
+	d->blkio_delay_total = (tmp < d->blkio_delay_total) ? 0 : tmp;
+	tmp = d->swapin_delay_total + tsk->delays->swapin_delay;
+	d->swapin_delay_total = (tmp < d->swapin_delay_total) ? 0 : tmp;
+	d->blkio_count += tsk->delays->blkio_count;
+	d->swapin_count += tsk->delays->swapin_count;
+	spin_unlock(&tsk->delays->lock);
+
+done:
+	spin_unlock(&tsk->delays_lock);
+	return 0;
+}
+
+__u64 __delayacct_blkio_ticks(struct task_struct *tsk)
+{
+	__u64 ret;
+
+	spin_lock(&tsk->delays->lock);
+	ret = nsec_to_clock_t(tsk->delays->blkio_delay +
+				tsk->delays->swapin_delay);
+	spin_unlock(&tsk->delays->lock);
+	return ret;
+}
+
diff -urN linux-2.6.18-rc1/kernel/exit.c linux-2.6.18-rc2/kernel/exit.c
--- linux-2.6.18-rc1/kernel/exit.c	2006-07-15 22:34:43.797129890 +0000
+++ linux-2.6.18-rc2/kernel/exit.c	2006-07-15 22:34:49.117707429 +0000
@@ -25,6 +25,8 @@
 #include <linux/mount.h>
 #include <linux/proc_fs.h>
 #include <linux/mempolicy.h>
+#include <linux/taskstats_kern.h>
+#include <linux/delayacct.h>
 #include <linux/cpuset.h>
 #include <linux/syscalls.h>
 #include <linux/signal.h>
@@ -843,7 +845,9 @@
 fastcall NORET_TYPE void do_exit(long code)
 {
 	struct task_struct *tsk = current;
+	struct taskstats *tidstats;
 	int group_dead;
+	unsigned int mycpu;
 
 	profile_task_exit(tsk);
 
@@ -881,6 +885,8 @@
 				current->comm, current->pid,
 				preempt_count());
 
+	taskstats_exit_alloc(&tidstats, &mycpu);
+
 	acct_update_integrals(tsk);
 	if (tsk->mm) {
 		update_hiwater_rss(tsk->mm);
@@ -900,6 +906,10 @@
 #endif
 	if (unlikely(tsk->audit_context))
 		audit_free(tsk);
+	taskstats_exit_send(tsk, tidstats, group_dead, mycpu);
+	taskstats_exit_free(tidstats);
+	delayacct_tsk_exit(tsk);
+
 	exit_mm(tsk);
 
 	if (group_dead)
diff -urN linux-2.6.18-rc1/kernel/fork.c linux-2.6.18-rc2/kernel/fork.c
--- linux-2.6.18-rc1/kernel/fork.c	2006-07-15 22:34:43.797129890 +0000
+++ linux-2.6.18-rc2/kernel/fork.c	2006-07-15 22:34:49.117707429 +0000
@@ -43,6 +43,8 @@
 #include <linux/rmap.h>
 #include <linux/acct.h>
 #include <linux/cn_proc.h>
+#include <linux/delayacct.h>
+#include <linux/taskstats_kern.h>
 
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
@@ -61,9 +63,7 @@
 
 DEFINE_PER_CPU(unsigned long, process_counts) = 0;
 
- __cacheline_aligned DEFINE_RWLOCK(tasklist_lock);  /* outer */
-
-EXPORT_SYMBOL(tasklist_lock);
+__cacheline_aligned DEFINE_RWLOCK(tasklist_lock);  /* outer */
 
 int nr_processes(void)
 {
@@ -820,6 +820,7 @@
 	if (clone_flags & CLONE_THREAD) {
 		atomic_inc(&current->signal->count);
 		atomic_inc(&current->signal->live);
+		taskstats_tgid_alloc(current->signal);
 		return 0;
 	}
 	sig = kmem_cache_alloc(signal_cachep, GFP_KERNEL);
@@ -864,6 +865,7 @@
 	INIT_LIST_HEAD(&sig->cpu_timers[0]);
 	INIT_LIST_HEAD(&sig->cpu_timers[1]);
 	INIT_LIST_HEAD(&sig->cpu_timers[2]);
+	taskstats_tgid_init(sig);
 
 	task_lock(current->group_leader);
 	memcpy(sig->rlim, current->signal->rlim, sizeof sig->rlim);
@@ -885,6 +887,7 @@
 void __cleanup_signal(struct signal_struct *sig)
 {
 	exit_thread_group_keys(sig);
+	taskstats_tgid_free(sig);
 	kmem_cache_free(signal_cachep, sig);
 }
 
@@ -1002,6 +1005,7 @@
 		goto bad_fork_cleanup_put_domain;
 
 	p->did_exec = 0;
+	delayacct_tsk_init(p);	/* Must remain after dup_task_struct() */
 	copy_flags(clone_flags, p);
 	p->pid = pid;
 	retval = -EFAULT;
diff -urN linux-2.6.18-rc1/kernel/futex.c linux-2.6.18-rc2/kernel/futex.c
--- linux-2.6.18-rc1/kernel/futex.c	2006-07-15 22:34:43.801130324 +0000
+++ linux-2.6.18-rc2/kernel/futex.c	2006-07-15 22:34:49.121707863 +0000
@@ -476,6 +476,12 @@
 			 * the refcount and return its pi_state:
 			 */
 			pi_state = this->pi_state;
+			/*
+			 * Userspace might have messed up non PI and PI futexes
+			 */
+			if (unlikely(!pi_state))
+				return -EINVAL;
+
 			atomic_inc(&pi_state->refcount);
 			me->pi_state = pi_state;
 
diff -urN linux-2.6.18-rc1/kernel/kallsyms.c linux-2.6.18-rc2/kernel/kallsyms.c
--- linux-2.6.18-rc1/kernel/kallsyms.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/kernel/kallsyms.c	2006-07-15 22:34:49.125708297 +0000
@@ -275,8 +275,8 @@
 static int get_ksymbol_mod(struct kallsym_iter *iter)
 {
 	iter->owner = module_get_kallsym(iter->pos - kallsyms_num_syms,
-					 &iter->value,
-					 &iter->type, iter->name);
+					 &iter->value, &iter->type,
+					 iter->name, sizeof(iter->name));
 	if (iter->owner == NULL)
 		return 0;
 
diff -urN linux-2.6.18-rc1/kernel/kthread.c linux-2.6.18-rc2/kernel/kthread.c
--- linux-2.6.18-rc1/kernel/kthread.c	2006-07-15 22:34:43.805130758 +0000
+++ linux-2.6.18-rc2/kernel/kthread.c	2006-07-15 22:34:49.125708297 +0000
@@ -216,23 +216,6 @@
  */
 int kthread_stop(struct task_struct *k)
 {
-	return kthread_stop_sem(k, NULL);
-}
-EXPORT_SYMBOL(kthread_stop);
-
-/**
- * kthread_stop_sem - stop a thread created by kthread_create().
- * @k: thread created by kthread_create().
- * @s: semaphore that @k waits on while idle.
- *
- * Does essentially the same thing as kthread_stop() above, but wakes
- * @k by calling up(@s).
- *
- * Returns the result of threadfn(), or %-EINTR if wake_up_process()
- * was never called.
- */
-int kthread_stop_sem(struct task_struct *k, struct semaphore *s)
-{
 	int ret;
 
 	mutex_lock(&kthread_stop_lock);
@@ -246,10 +229,7 @@
 
 	/* Now set kthread_should_stop() to true, and wake it up. */
 	kthread_stop_info.k = k;
-	if (s)
-		up(s);
-	else
-		wake_up_process(k);
+	wake_up_process(k);
 	put_task_struct(k);
 
 	/* Once it dies, reset stop ptr, gather result and we're done. */
@@ -260,7 +240,7 @@
 
 	return ret;
 }
-EXPORT_SYMBOL(kthread_stop_sem);
+EXPORT_SYMBOL(kthread_stop);
 
 static __init int helper_init(void)
 {
diff -urN linux-2.6.18-rc1/kernel/lockdep.c linux-2.6.18-rc2/kernel/lockdep.c
--- linux-2.6.18-rc1/kernel/lockdep.c	2006-07-15 22:34:43.809131193 +0000
+++ linux-2.6.18-rc2/kernel/lockdep.c	2006-07-15 22:34:49.125708297 +0000
@@ -169,22 +169,17 @@
  */
 static int class_filter(struct lock_class *class)
 {
+#if 0
+	/* Example */
 	if (class->name_version == 1 &&
-			!strcmp(class->name, "&rl->lock"))
+			!strcmp(class->name, "lockname"))
 		return 1;
 	if (class->name_version == 1 &&
-			!strcmp(class->name, "&ni->mrec_lock"))
+			!strcmp(class->name, "&struct->lockfield"))
 		return 1;
-	if (class->name_version == 1 &&
-			!strcmp(class->name, "mft_ni_runlist_lock"))
-		return 1;
-	if (class->name_version == 1 &&
-			!strcmp(class->name, "mft_ni_mrec_lock"))
-		return 1;
-	if (class->name_version == 1 &&
-			!strcmp(class->name, "&vol->lcnbmp_lock"))
-		return 1;
-	return 0;
+#endif
+	/* Allow everything else. 0 would be filter everything else */
+	return 1;
 }
 #endif
 
@@ -408,23 +403,12 @@
 		print_lock(curr->held_locks + i);
 	}
 }
-/*
- * Helper to print a nice hierarchy of lock dependencies:
- */
-static void print_spaces(int nr)
-{
-	int i;
-
-	for (i = 0; i < nr; i++)
-		printk("  ");
-}
 
 static void print_lock_class_header(struct lock_class *class, int depth)
 {
 	int bit;
 
-	print_spaces(depth);
-	printk("->");
+	printk("%*s->", depth, "");
 	print_lock_name(class);
 	printk(" ops: %lu", class->ops);
 	printk(" {\n");
@@ -433,17 +417,14 @@
 		if (class->usage_mask & (1 << bit)) {
 			int len = depth;
 
-			print_spaces(depth);
-			len += printk("   %s", usage_str[bit]);
+			len += printk("%*s   %s", depth, "", usage_str[bit]);
 			len += printk(" at:\n");
 			print_stack_trace(class->usage_traces + bit, len);
 		}
 	}
-	print_spaces(depth);
-	printk(" }\n");
+	printk("%*s }\n", depth, "");
 
-	print_spaces(depth);
-	printk(" ... key      at: ");
+	printk("%*s ... key      at: ",depth,"");
 	print_ip_sym((unsigned long)class->key);
 }
 
@@ -463,8 +444,7 @@
 		DEBUG_LOCKS_WARN_ON(!entry->class);
 		print_lock_dependencies(entry->class, depth + 1);
 
-		print_spaces(depth);
-		printk(" ... acquired at:\n");
+		printk("%*s ... acquired at:\n",depth,"");
 		print_stack_trace(&entry->trace, 2);
 		printk("\n");
 	}
@@ -1124,7 +1104,7 @@
  * itself, so actual lookup of the hash should be once per lock object.
  */
 static inline struct lock_class *
-register_lock_class(struct lockdep_map *lock, unsigned int subclass)
+look_up_lock_class(struct lockdep_map *lock, unsigned int subclass)
 {
 	struct lockdep_subclass_key *key;
 	struct list_head *hash_head;
@@ -1168,7 +1148,26 @@
 	 */
 	list_for_each_entry(class, hash_head, hash_entry)
 		if (class->key == key)
-			goto out_set;
+			return class;
+
+	return NULL;
+}
+
+/*
+ * Register a lock's class in the hash-table, if the class is not present
+ * yet. Otherwise we look it up. We cache the result in the lock object
+ * itself, so actual lookup of the hash should be once per lock object.
+ */
+static inline struct lock_class *
+register_lock_class(struct lockdep_map *lock, unsigned int subclass)
+{
+	struct lockdep_subclass_key *key;
+	struct list_head *hash_head;
+	struct lock_class *class;
+
+	class = look_up_lock_class(lock, subclass);
+	if (likely(class))
+		return class;
 
 	/*
 	 * Debug-check: all keys must be persistent!
@@ -1183,6 +1182,9 @@
 		return NULL;
 	}
 
+	key = lock->key->subkeys + subclass;
+	hash_head = classhashentry(key);
+
 	__raw_spin_lock(&hash_lock);
 	/*
 	 * We have to do the hash-walk again, to avoid races
@@ -1229,8 +1231,8 @@
 out_unlock_set:
 	__raw_spin_unlock(&hash_lock);
 
-out_set:
-	lock->class[subclass] = class;
+	if (!subclass)
+		lock->class_cache = class;
 
 	DEBUG_LOCKS_WARN_ON(class->subclass != subclass);
 
@@ -1934,7 +1936,7 @@
 	}
 	lock->name = name;
 	lock->key = key;
-	memset(lock->class, 0, sizeof(lock->class[0])*MAX_LOCKDEP_SUBCLASSES);
+	lock->class_cache = NULL;
 }
 
 EXPORT_SYMBOL_GPL(lockdep_init_map);
@@ -1948,8 +1950,8 @@
 			  unsigned long ip)
 {
 	struct task_struct *curr = current;
+	struct lock_class *class = NULL;
 	struct held_lock *hlock;
-	struct lock_class *class;
 	unsigned int depth, id;
 	int chain_head = 0;
 	u64 chain_key;
@@ -1967,8 +1969,11 @@
 		return 0;
 	}
 
-	class = lock->class[subclass];
-	/* not cached yet? */
+	if (!subclass)
+		class = lock->class_cache;
+	/*
+	 * Not cached yet or subclass?
+	 */
 	if (unlikely(!class)) {
 		class = register_lock_class(lock, subclass);
 		if (!class)
@@ -2469,48 +2474,44 @@
 
 void lockdep_reset_lock(struct lockdep_map *lock)
 {
-	struct lock_class *class, *next, *entry;
+	struct lock_class *class, *next;
 	struct list_head *head;
 	unsigned long flags;
 	int i, j;
 
 	raw_local_irq_save(flags);
-	__raw_spin_lock(&hash_lock);
 
 	/*
-	 * Remove all classes this lock has:
+	 * Remove all classes this lock might have:
+	 */
+	for (j = 0; j < MAX_LOCKDEP_SUBCLASSES; j++) {
+		/*
+		 * If the class exists we look it up and zap it:
+		 */
+		class = look_up_lock_class(lock, j);
+		if (class)
+			zap_class(class);
+	}
+	/*
+	 * Debug check: in the end all mapped classes should
+	 * be gone.
 	 */
+	__raw_spin_lock(&hash_lock);
 	for (i = 0; i < CLASSHASH_SIZE; i++) {
 		head = classhash_table + i;
 		if (list_empty(head))
 			continue;
 		list_for_each_entry_safe(class, next, head, hash_entry) {
-			for (j = 0; j < MAX_LOCKDEP_SUBCLASSES; j++) {
-				entry = lock->class[j];
-				if (class == entry) {
-					zap_class(class);
-					lock->class[j] = NULL;
-					break;
-				}
+			if (unlikely(class == lock->class_cache)) {
+				__raw_spin_unlock(&hash_lock);
+				DEBUG_LOCKS_WARN_ON(1);
+				goto out_restore;
 			}
 		}
 	}
-
-	/*
-	 * Debug check: in the end all mapped classes should
-	 * be gone.
-	 */
-	for (j = 0; j < MAX_LOCKDEP_SUBCLASSES; j++) {
-		entry = lock->class[j];
-		if (!entry)
-			continue;
-		__raw_spin_unlock(&hash_lock);
-		DEBUG_LOCKS_WARN_ON(1);
-		raw_local_irq_restore(flags);
-		return;
-	}
-
 	__raw_spin_unlock(&hash_lock);
+
+out_restore:
 	raw_local_irq_restore(flags);
 }
 
@@ -2571,7 +2572,7 @@
 
 static void
 print_freed_lock_bug(struct task_struct *curr, const void *mem_from,
-		     const void *mem_to)
+		     const void *mem_to, struct held_lock *hlock)
 {
 	if (!debug_locks_off())
 		return;
@@ -2583,6 +2584,7 @@
 	printk(  "-------------------------\n");
 	printk("%s/%d is freeing memory %p-%p, with a lock still held there!\n",
 		curr->comm, curr->pid, mem_from, mem_to-1);
+	print_lock(hlock);
 	lockdep_print_held_locks(curr);
 
 	printk("\nstack backtrace:\n");
@@ -2616,7 +2618,7 @@
 					!in_range(mem_from, lock_to, mem_to))
 			continue;
 
-		print_freed_lock_bug(curr, mem_from, mem_to);
+		print_freed_lock_bug(curr, mem_from, mem_to, hlock);
 		break;
 	}
 	local_irq_restore(flags);
diff -urN linux-2.6.18-rc1/kernel/module.c linux-2.6.18-rc2/kernel/module.c
--- linux-2.6.18-rc1/kernel/module.c	2006-07-15 22:34:43.809131193 +0000
+++ linux-2.6.18-rc2/kernel/module.c	2006-07-15 22:34:49.129708731 +0000
@@ -2019,10 +2019,8 @@
 	return NULL;
 }
 
-struct module *module_get_kallsym(unsigned int symnum,
-				  unsigned long *value,
-				  char *type,
-				  char namebuf[128])
+struct module *module_get_kallsym(unsigned int symnum, unsigned long *value,
+				char *type, char *name, size_t namelen)
 {
 	struct module *mod;
 
@@ -2031,9 +2029,8 @@
 		if (symnum < mod->num_symtab) {
 			*value = mod->symtab[symnum].st_value;
 			*type = mod->symtab[symnum].st_info;
-			strncpy(namebuf,
-				mod->strtab + mod->symtab[symnum].st_name,
-				127);
+			strlcpy(name, mod->strtab + mod->symtab[symnum].st_name,
+				namelen);
 			mutex_unlock(&module_mutex);
 			return mod;
 		}
diff -urN linux-2.6.18-rc1/kernel/panic.c linux-2.6.18-rc2/kernel/panic.c
--- linux-2.6.18-rc1/kernel/panic.c	2006-07-15 22:34:43.809131193 +0000
+++ linux-2.6.18-rc2/kernel/panic.c	2006-07-15 22:34:49.129708731 +0000
@@ -172,6 +172,7 @@
 
 void add_taint(unsigned flag)
 {
+	debug_locks_off(); /* can't trust the integrity of the kernel anymore */
 	tainted |= flag;
 }
 EXPORT_SYMBOL(add_taint);
@@ -256,6 +257,7 @@
  */
 void oops_enter(void)
 {
+	debug_locks_off(); /* can't trust the integrity of the kernel anymore */
 	do_oops_enter_exit();
 }
 
diff -urN linux-2.6.18-rc1/kernel/power/pm.c linux-2.6.18-rc2/kernel/power/pm.c
--- linux-2.6.18-rc1/kernel/power/pm.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/kernel/power/pm.c	2006-07-15 22:34:49.133709166 +0000
@@ -75,42 +75,6 @@
 	return dev;
 }
 
-static void __pm_unregister(struct pm_dev *dev)
-{
-	if (dev) {
-		list_del(&dev->entry);
-		kfree(dev);
-	}
-}
-
-/**
- *	pm_unregister_all - unregister all devices with matching callback
- *	@callback: callback function pointer
- *
- *	Unregister every device that would call the callback passed. This
- *	is primarily meant as a helper function for loadable modules. It
- *	enables a module to give up all its managed devices without keeping
- *	its own private list.
- */
- 
-void pm_unregister_all(pm_callback callback)
-{
-	struct list_head *entry;
-
-	if (!callback)
-		return;
-
-	mutex_lock(&pm_devs_lock);
-	entry = pm_devs.next;
-	while (entry != &pm_devs) {
-		struct pm_dev *dev = list_entry(entry, struct pm_dev, entry);
-		entry = entry->next;
-		if (dev->callback == callback)
-			__pm_unregister(dev);
-	}
-	mutex_unlock(&pm_devs_lock);
-}
-
 /**
  *	pm_send - send request to a single device
  *	@dev: device to send to
@@ -239,7 +203,6 @@
 }
 
 EXPORT_SYMBOL(pm_register);
-EXPORT_SYMBOL(pm_unregister_all);
 EXPORT_SYMBOL(pm_send_all);
 EXPORT_SYMBOL(pm_active);
 
diff -urN linux-2.6.18-rc1/kernel/power/snapshot.c linux-2.6.18-rc2/kernel/power/snapshot.c
--- linux-2.6.18-rc1/kernel/power/snapshot.c	2006-07-15 22:34:43.813131627 +0000
+++ linux-2.6.18-rc2/kernel/power/snapshot.c	2006-07-15 22:34:49.133709166 +0000
@@ -227,11 +227,17 @@
 		for (zone_pfn = 0; zone_pfn < zone->spanned_pages; ++zone_pfn) {
 			if (saveable(zone, &zone_pfn)) {
 				struct page *page;
+				long *src, *dst;
+				int n;
+
 				page = pfn_to_page(zone_pfn + zone->zone_start_pfn);
 				BUG_ON(!pbe);
 				pbe->orig_address = (unsigned long)page_address(page);
-				/* copy_page is not usable for copying task structs. */
-				memcpy((void *)pbe->address, (void *)pbe->orig_address, PAGE_SIZE);
+				/* copy_page and memcpy are not usable for copying task structs. */
+				dst = (long *)pbe->address;
+				src = (long *)pbe->orig_address;
+				for (n = PAGE_SIZE / sizeof(long); n; n--)
+					*dst++ = *src++;
 				pbe = pbe->next;
 			}
 		}
diff -urN linux-2.6.18-rc1/kernel/power/swap.c linux-2.6.18-rc2/kernel/power/swap.c
--- linux-2.6.18-rc1/kernel/power/swap.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/kernel/power/swap.c	2006-07-15 22:34:49.133709166 +0000
@@ -263,7 +263,6 @@
 	struct swap_map_handle handle;
 	struct snapshot_handle snapshot;
 	struct swsusp_info *header;
-	unsigned long start;
 	int error;
 
 	if ((error = swsusp_swap_check())) {
@@ -281,16 +280,17 @@
 	}
 	error = get_swap_writer(&handle);
 	if (!error) {
-		start = handle.cur_swap;
+		unsigned long start = handle.cur_swap;
 		error = swap_write_page(&handle, header);
-	}
-	if (!error)
-		error = save_image(&handle, &snapshot, header->pages - 1);
-	if (!error) {
-		flush_swap_writer(&handle);
-		printk("S");
-		error = mark_swapfiles(swp_entry(root_swap, start));
-		printk("|\n");
+		if (!error)
+			error = save_image(&handle, &snapshot,
+					header->pages - 1);
+		if (!error) {
+			flush_swap_writer(&handle);
+			printk("S");
+			error = mark_swapfiles(swp_entry(root_swap, start));
+			printk("|\n");
+		}
 	}
 	if (error)
 		free_all_swap_pages(root_swap, handle.bitmap);
@@ -311,8 +311,10 @@
 
 static int end_io(struct bio *bio, unsigned int num, int err)
 {
-	if (!test_bit(BIO_UPTODATE, &bio->bi_flags))
-		panic("I/O error reading memory image");
+	if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) {
+		printk(KERN_ERR "I/O error reading swsusp image.\n");
+		return -EIO;
+	}
 	atomic_set(&io_done, 0);
 	return 0;
 }
diff -urN linux-2.6.18-rc1/kernel/printk.c linux-2.6.18-rc2/kernel/printk.c
--- linux-2.6.18-rc1/kernel/printk.c	2006-07-15 22:34:43.813131627 +0000
+++ linux-2.6.18-rc2/kernel/printk.c	2006-07-15 22:34:49.133709166 +0000
@@ -52,7 +52,7 @@
 	DEFAULT_CONSOLE_LOGLEVEL,	/* default_console_loglevel */
 };
 
-EXPORT_SYMBOL(console_printk);
+EXPORT_UNUSED_SYMBOL(console_printk);  /*  June 2006  */
 
 /*
  * Low lever drivers may need that to know if they can schedule in
@@ -773,7 +773,7 @@
 {
 	return console_locked;
 }
-EXPORT_SYMBOL(is_console_locked);
+EXPORT_UNUSED_SYMBOL(is_console_locked);  /*  June 2006  */
 
 /**
  * release_console_sem - unlock the console system
diff -urN linux-2.6.18-rc1/kernel/resource.c linux-2.6.18-rc2/kernel/resource.c
--- linux-2.6.18-rc1/kernel/resource.c	2006-07-15 22:34:43.813131627 +0000
+++ linux-2.6.18-rc2/kernel/resource.c	2006-07-15 22:34:49.133709166 +0000
@@ -404,8 +404,6 @@
 	return result;
 }
 
-EXPORT_SYMBOL(insert_resource);
-
 /*
  * Given an existing resource, change its start and size to match the
  * arguments.  Returns -EBUSY if it can't fit.  Existing children of
diff -urN linux-2.6.18-rc1/kernel/rtmutex-tester.c linux-2.6.18-rc2/kernel/rtmutex-tester.c
--- linux-2.6.18-rc1/kernel/rtmutex-tester.c	2006-07-15 22:34:43.817132061 +0000
+++ linux-2.6.18-rc2/kernel/rtmutex-tester.c	2006-07-15 22:34:49.137709600 +0000
@@ -275,6 +275,7 @@
 
 		/* Wait for the next command to be executed */
 		schedule();
+		try_to_freeze();
 
 		if (signal_pending(current))
 			flush_signals(current);
diff -urN linux-2.6.18-rc1/kernel/sched.c linux-2.6.18-rc2/kernel/sched.c
--- linux-2.6.18-rc1/kernel/sched.c	2006-07-15 22:34:43.821132495 +0000
+++ linux-2.6.18-rc2/kernel/sched.c	2006-07-15 22:34:49.141710034 +0000
@@ -51,6 +51,7 @@
 #include <linux/times.h>
 #include <linux/acct.h>
 #include <linux/kprobes.h>
+#include <linux/delayacct.h>
 #include <asm/tlb.h>
 
 #include <asm/unistd.h>
@@ -501,9 +502,36 @@
 	.release = single_release,
 };
 
+/*
+ * Expects runqueue lock to be held for atomicity of update
+ */
+static inline void
+rq_sched_info_arrive(struct rq *rq, unsigned long delta_jiffies)
+{
+	if (rq) {
+		rq->rq_sched_info.run_delay += delta_jiffies;
+		rq->rq_sched_info.pcnt++;
+	}
+}
+
+/*
+ * Expects runqueue lock to be held for atomicity of update
+ */
+static inline void
+rq_sched_info_depart(struct rq *rq, unsigned long delta_jiffies)
+{
+	if (rq)
+		rq->rq_sched_info.cpu_time += delta_jiffies;
+}
 # define schedstat_inc(rq, field)	do { (rq)->field++; } while (0)
 # define schedstat_add(rq, field, amt)	do { (rq)->field += (amt); } while (0)
 #else /* !CONFIG_SCHEDSTATS */
+static inline void
+rq_sched_info_arrive(struct rq *rq, unsigned long delta_jiffies)
+{}
+static inline void
+rq_sched_info_depart(struct rq *rq, unsigned long delta_jiffies)
+{}
 # define schedstat_inc(rq, field)	do { } while (0)
 # define schedstat_add(rq, field, amt)	do { } while (0)
 #endif
@@ -523,7 +551,7 @@
 	return rq;
 }
 
-#ifdef CONFIG_SCHEDSTATS
+#if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
 /*
  * Called when a process is dequeued from the active array and given
  * the cpu.  We should note that with the exception of interactive
@@ -551,21 +579,16 @@
  */
 static void sched_info_arrive(struct task_struct *t)
 {
-	unsigned long now = jiffies, diff = 0;
-	struct rq *rq = task_rq(t);
+	unsigned long now = jiffies, delta_jiffies = 0;
 
 	if (t->sched_info.last_queued)
-		diff = now - t->sched_info.last_queued;
+		delta_jiffies = now - t->sched_info.last_queued;
 	sched_info_dequeued(t);
-	t->sched_info.run_delay += diff;
+	t->sched_info.run_delay += delta_jiffies;
 	t->sched_info.last_arrival = now;
 	t->sched_info.pcnt++;
 
-	if (!rq)
-		return;
-
-	rq->rq_sched_info.run_delay += diff;
-	rq->rq_sched_info.pcnt++;
+	rq_sched_info_arrive(task_rq(t), delta_jiffies);
 }
 
 /*
@@ -585,8 +608,9 @@
  */
 static inline void sched_info_queued(struct task_struct *t)
 {
-	if (!t->sched_info.last_queued)
-		t->sched_info.last_queued = jiffies;
+	if (unlikely(sched_info_on()))
+		if (!t->sched_info.last_queued)
+			t->sched_info.last_queued = jiffies;
 }
 
 /*
@@ -595,13 +619,10 @@
  */
 static inline void sched_info_depart(struct task_struct *t)
 {
-	struct rq *rq = task_rq(t);
-	unsigned long diff = jiffies - t->sched_info.last_arrival;
+	unsigned long delta_jiffies = jiffies - t->sched_info.last_arrival;
 
-	t->sched_info.cpu_time += diff;
-
-	if (rq)
-		rq->rq_sched_info.cpu_time += diff;
+	t->sched_info.cpu_time += delta_jiffies;
+	rq_sched_info_depart(task_rq(t), delta_jiffies);
 }
 
 /*
@@ -610,7 +631,7 @@
  * the idle task.)  We are only called when prev != next.
  */
 static inline void
-sched_info_switch(struct task_struct *prev, struct task_struct *next)
+__sched_info_switch(struct task_struct *prev, struct task_struct *next)
 {
 	struct rq *rq = task_rq(prev);
 
@@ -625,10 +646,16 @@
 	if (next != rq->idle)
 		sched_info_arrive(next);
 }
+static inline void
+sched_info_switch(struct task_struct *prev, struct task_struct *next)
+{
+	if (unlikely(sched_info_on()))
+		__sched_info_switch(prev, next);
+}
 #else
 #define sched_info_queued(t)		do { } while (0)
 #define sched_info_switch(t, next)	do { } while (0)
-#endif /* CONFIG_SCHEDSTATS */
+#endif /* CONFIG_SCHEDSTATS || CONFIG_TASK_DELAY_ACCT */
 
 /*
  * Adding/removing a task to/from a priority array:
@@ -1530,8 +1557,9 @@
 
 	INIT_LIST_HEAD(&p->run_list);
 	p->array = NULL;
-#ifdef CONFIG_SCHEDSTATS
-	memset(&p->sched_info, 0, sizeof(p->sched_info));
+#if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
+	if (unlikely(sched_info_on()))
+		memset(&p->sched_info, 0, sizeof(p->sched_info));
 #endif
 #if defined(CONFIG_SMP) && defined(__ARCH_WANT_UNLOCKED_CTXSW)
 	p->oncpu = 0;
@@ -1788,7 +1816,15 @@
 		WARN_ON(rq->prev_mm);
 		rq->prev_mm = oldmm;
 	}
+	/*
+	 * Since the runqueue lock will be released by the next
+	 * task (which is an invalid locking op but in the case
+	 * of the scheduler it's an obvious special-case), so we
+	 * do an early lockdep release here:
+	 */
+#ifndef __ARCH_WANT_UNLOCKED_CTXSW
 	spin_release(&rq->lock.dep_map, 1, _THIS_IP_);
+#endif
 
 	/* Here we just switch the register state and the stack. */
 	switch_to(prev, next, prev);
@@ -3384,7 +3420,7 @@
 
 #ifdef CONFIG_PREEMPT
 /*
- * this is is the entry point to schedule() from in-kernel preemption
+ * this is the entry point to schedule() from in-kernel preemption
  * off of preempt_enable.  Kernel preemptions off return from interrupt
  * occur there and call schedule directly.
  */
@@ -3427,7 +3463,7 @@
 EXPORT_SYMBOL(preempt_schedule);
 
 /*
- * this is is the entry point to schedule() from kernel preemption
+ * this is the entry point to schedule() from kernel preemption
  * off of irq context.
  * Note, that this is called and return with irqs disabled. This will
  * protect us against recursive calling from irq.
@@ -3439,7 +3475,7 @@
 	struct task_struct *task = current;
 	int saved_lock_depth;
 #endif
-	/* Catch callers which need to be fixed*/
+	/* Catch callers which need to be fixed */
 	BUG_ON(ti->preempt_count || !irqs_disabled());
 
 need_resched:
@@ -4526,9 +4562,11 @@
 {
 	struct rq *rq = &__raw_get_cpu_var(runqueues);
 
+	delayacct_blkio_start();
 	atomic_inc(&rq->nr_iowait);
 	schedule();
 	atomic_dec(&rq->nr_iowait);
+	delayacct_blkio_end();
 }
 EXPORT_SYMBOL(io_schedule);
 
@@ -4537,9 +4575,11 @@
 	struct rq *rq = &__raw_get_cpu_var(runqueues);
 	long ret;
 
+	delayacct_blkio_start();
 	atomic_inc(&rq->nr_iowait);
 	ret = schedule_timeout(timeout);
 	atomic_dec(&rq->nr_iowait);
+	delayacct_blkio_end();
 	return ret;
 }
 
@@ -4650,7 +4690,7 @@
 	return list_entry(p->sibling.next,struct task_struct,sibling);
 }
 
-static const char *stat_nam[] = { "R", "S", "D", "T", "t", "Z", "X" };
+static const char stat_nam[] = "RSDTtZX";
 
 static void show_task(struct task_struct *p)
 {
@@ -4658,12 +4698,9 @@
 	unsigned long free = 0;
 	unsigned state;
 
-	printk("%-13.13s ", p->comm);
 	state = p->state ? __ffs(p->state) + 1 : 0;
-	if (state < ARRAY_SIZE(stat_nam))
-		printk(stat_nam[state]);
-	else
-		printk("?");
+	printk("%-13.13s %c", p->comm,
+		state < sizeof(stat_nam) - 1 ? stat_nam[state] : '?');
 #if (BITS_PER_LONG == 32)
 	if (state == TASK_RUNNING)
 		printk(" running ");
@@ -4877,7 +4914,7 @@
 		p->timestamp = p->timestamp - rq_src->timestamp_last_tick
 				+ rq_dest->timestamp_last_tick;
 		deactivate_task(p, rq_src);
-		activate_task(p, rq_dest, 0);
+		__activate_task(p, rq_dest);
 		if (TASK_PREEMPTS_CURR(p, rq_dest))
 			resched_task(rq_dest->curr);
 	}
@@ -5776,7 +5813,7 @@
 	cache = vmalloc(max_size);
 	if (!cache) {
 		printk("could not vmalloc %d bytes for cache!\n", 2*max_size);
-		return 1000000; // return 1 msec on very small boxen
+		return 1000000; /* return 1 msec on very small boxen */
 	}
 
 	while (size <= max_size) {
diff -urN linux-2.6.18-rc1/kernel/softirq.c linux-2.6.18-rc2/kernel/softirq.c
--- linux-2.6.18-rc1/kernel/softirq.c	2006-07-15 22:34:43.825132930 +0000
+++ linux-2.6.18-rc2/kernel/softirq.c	2006-07-15 22:34:49.145710468 +0000
@@ -311,8 +311,6 @@
 	softirq_vec[nr].action = action;
 }
 
-EXPORT_SYMBOL(open_softirq);
-
 /* Tasklets */
 struct tasklet_head
 {
diff -urN linux-2.6.18-rc1/kernel/sys.c linux-2.6.18-rc2/kernel/sys.c
--- linux-2.6.18-rc1/kernel/sys.c	2006-07-15 22:34:43.825132930 +0000
+++ linux-2.6.18-rc2/kernel/sys.c	2006-07-15 22:34:49.145710468 +0000
@@ -1983,7 +1983,7 @@
 			error = current->mm->dumpable;
 			break;
 		case PR_SET_DUMPABLE:
-			if (arg2 < 0 || arg2 > 2) {
+			if (arg2 < 0 || arg2 > 1) {
 				error = -EINVAL;
 				break;
 			}
diff -urN linux-2.6.18-rc1/kernel/taskstats.c linux-2.6.18-rc2/kernel/taskstats.c
--- linux-2.6.18-rc1/kernel/taskstats.c	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/kernel/taskstats.c	2006-07-15 22:34:49.149710903 +0000
@@ -0,0 +1,568 @@
+/*
+ * taskstats.c - Export per-task statistics to userland
+ *
+ * Copyright (C) Shailabh Nagar, IBM Corp. 2006
+ *           (C) Balbir Singh,   IBM Corp. 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/taskstats_kern.h>
+#include <linux/delayacct.h>
+#include <linux/cpumask.h>
+#include <linux/percpu.h>
+#include <net/genetlink.h>
+#include <asm/atomic.h>
+
+/*
+ * Maximum length of a cpumask that can be specified in
+ * the TASKSTATS_CMD_ATTR_REGISTER/DEREGISTER_CPUMASK attribute
+ */
+#define TASKSTATS_CPUMASK_MAXLEN	(100+6*NR_CPUS)
+
+static DEFINE_PER_CPU(__u32, taskstats_seqnum) = { 0 };
+static int family_registered;
+kmem_cache_t *taskstats_cache;
+
+static struct genl_family family = {
+	.id		= GENL_ID_GENERATE,
+	.name		= TASKSTATS_GENL_NAME,
+	.version	= TASKSTATS_GENL_VERSION,
+	.maxattr	= TASKSTATS_CMD_ATTR_MAX,
+};
+
+static struct nla_policy taskstats_cmd_get_policy[TASKSTATS_CMD_ATTR_MAX+1]
+__read_mostly = {
+	[TASKSTATS_CMD_ATTR_PID]  = { .type = NLA_U32 },
+	[TASKSTATS_CMD_ATTR_TGID] = { .type = NLA_U32 },
+	[TASKSTATS_CMD_ATTR_REGISTER_CPUMASK] = { .type = NLA_STRING },
+	[TASKSTATS_CMD_ATTR_DEREGISTER_CPUMASK] = { .type = NLA_STRING },};
+
+struct listener {
+	struct list_head list;
+	pid_t pid;
+	char valid;
+};
+
+struct listener_list {
+	struct rw_semaphore sem;
+	struct list_head list;
+};
+static DEFINE_PER_CPU(struct listener_list, listener_array);
+
+enum actions {
+	REGISTER,
+	DEREGISTER,
+	CPU_DONT_CARE
+};
+
+static int prepare_reply(struct genl_info *info, u8 cmd, struct sk_buff **skbp,
+			void **replyp, size_t size)
+{
+	struct sk_buff *skb;
+	void *reply;
+
+	/*
+	 * If new attributes are added, please revisit this allocation
+	 */
+	skb = nlmsg_new(size);
+	if (!skb)
+		return -ENOMEM;
+
+	if (!info) {
+		int seq = get_cpu_var(taskstats_seqnum)++;
+		put_cpu_var(taskstats_seqnum);
+
+		reply = genlmsg_put(skb, 0, seq,
+				family.id, 0, 0,
+				cmd, family.version);
+	} else
+		reply = genlmsg_put(skb, info->snd_pid, info->snd_seq,
+				family.id, 0, 0,
+				cmd, family.version);
+	if (reply == NULL) {
+		nlmsg_free(skb);
+		return -EINVAL;
+	}
+
+	*skbp = skb;
+	*replyp = reply;
+	return 0;
+}
+
+/*
+ * Send taskstats data in @skb to listener with nl_pid @pid
+ */
+static int send_reply(struct sk_buff *skb, pid_t pid)
+{
+	struct genlmsghdr *genlhdr = nlmsg_data((struct nlmsghdr *)skb->data);
+	void *reply = genlmsg_data(genlhdr);
+	int rc;
+
+	rc = genlmsg_end(skb, reply);
+	if (rc < 0) {
+		nlmsg_free(skb);
+		return rc;
+	}
+
+	return genlmsg_unicast(skb, pid);
+}
+
+/*
+ * Send taskstats data in @skb to listeners registered for @cpu's exit data
+ */
+static int send_cpu_listeners(struct sk_buff *skb, unsigned int cpu)
+{
+	struct genlmsghdr *genlhdr = nlmsg_data((struct nlmsghdr *)skb->data);
+	struct listener_list *listeners;
+	struct listener *s, *tmp;
+	struct sk_buff *skb_next, *skb_cur = skb;
+	void *reply = genlmsg_data(genlhdr);
+	int rc, ret, delcount = 0;
+
+	rc = genlmsg_end(skb, reply);
+	if (rc < 0) {
+		nlmsg_free(skb);
+		return rc;
+	}
+
+	rc = 0;
+	listeners = &per_cpu(listener_array, cpu);
+	down_read(&listeners->sem);
+	list_for_each_entry_safe(s, tmp, &listeners->list, list) {
+		skb_next = NULL;
+		if (!list_is_last(&s->list, &listeners->list)) {
+			skb_next = skb_clone(skb_cur, GFP_KERNEL);
+			if (!skb_next) {
+				nlmsg_free(skb_cur);
+				rc = -ENOMEM;
+				break;
+			}
+		}
+		ret = genlmsg_unicast(skb_cur, s->pid);
+		if (ret == -ECONNREFUSED) {
+			s->valid = 0;
+			delcount++;
+			rc = ret;
+		}
+		skb_cur = skb_next;
+	}
+	up_read(&listeners->sem);
+
+	if (!delcount)
+		return rc;
+
+	/* Delete invalidated entries */
+	down_write(&listeners->sem);
+	list_for_each_entry_safe(s, tmp, &listeners->list, list) {
+		if (!s->valid) {
+			list_del(&s->list);
+			kfree(s);
+		}
+	}
+	up_write(&listeners->sem);
+	return rc;
+}
+
+static int fill_pid(pid_t pid, struct task_struct *pidtsk,
+		struct taskstats *stats)
+{
+	int rc;
+	struct task_struct *tsk = pidtsk;
+
+	if (!pidtsk) {
+		read_lock(&tasklist_lock);
+		tsk = find_task_by_pid(pid);
+		if (!tsk) {
+			read_unlock(&tasklist_lock);
+			return -ESRCH;
+		}
+		get_task_struct(tsk);
+		read_unlock(&tasklist_lock);
+	} else
+		get_task_struct(tsk);
+
+	/*
+	 * Each accounting subsystem adds calls to its functions to
+	 * fill in relevant parts of struct taskstsats as follows
+	 *
+	 *	rc = per-task-foo(stats, tsk);
+	 *	if (rc)
+	 *		goto err;
+	 */
+
+	rc = delayacct_add_tsk(stats, tsk);
+	stats->version = TASKSTATS_VERSION;
+
+	/* Define err: label here if needed */
+	put_task_struct(tsk);
+	return rc;
+
+}
+
+static int fill_tgid(pid_t tgid, struct task_struct *tgidtsk,
+		struct taskstats *stats)
+{
+	struct task_struct *tsk, *first;
+	unsigned long flags;
+
+	/*
+	 * Add additional stats from live tasks except zombie thread group
+	 * leaders who are already counted with the dead tasks
+	 */
+	first = tgidtsk;
+	if (!first) {
+		read_lock(&tasklist_lock);
+		first = find_task_by_pid(tgid);
+		if (!first) {
+			read_unlock(&tasklist_lock);
+			return -ESRCH;
+		}
+		get_task_struct(first);
+		read_unlock(&tasklist_lock);
+	} else
+		get_task_struct(first);
+
+	/* Start with stats from dead tasks */
+	spin_lock_irqsave(&first->signal->stats_lock, flags);
+	if (first->signal->stats)
+		memcpy(stats, first->signal->stats, sizeof(*stats));
+	spin_unlock_irqrestore(&first->signal->stats_lock, flags);
+
+	tsk = first;
+	read_lock(&tasklist_lock);
+	do {
+		if (tsk->exit_state == EXIT_ZOMBIE && thread_group_leader(tsk))
+			continue;
+		/*
+		 * Accounting subsystem can call its functions here to
+		 * fill in relevant parts of struct taskstsats as follows
+		 *
+		 *	per-task-foo(stats, tsk);
+		 */
+		delayacct_add_tsk(stats, tsk);
+
+	} while_each_thread(first, tsk);
+	read_unlock(&tasklist_lock);
+	stats->version = TASKSTATS_VERSION;
+
+	/*
+	 * Accounting subsytems can also add calls here to modify
+	 * fields of taskstats.
+	 */
+
+	return 0;
+}
+
+
+static void fill_tgid_exit(struct task_struct *tsk)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&tsk->signal->stats_lock, flags);
+	if (!tsk->signal->stats)
+		goto ret;
+
+	/*
+	 * Each accounting subsystem calls its functions here to
+	 * accumalate its per-task stats for tsk, into the per-tgid structure
+	 *
+	 *	per-task-foo(tsk->signal->stats, tsk);
+	 */
+	delayacct_add_tsk(tsk->signal->stats, tsk);
+ret:
+	spin_unlock_irqrestore(&tsk->signal->stats_lock, flags);
+	return;
+}
+
+static int add_del_listener(pid_t pid, cpumask_t *maskp, int isadd)
+{
+	struct listener_list *listeners;
+	struct listener *s, *tmp;
+	unsigned int cpu;
+	cpumask_t mask = *maskp;
+
+	if (!cpus_subset(mask, cpu_possible_map))
+		return -EINVAL;
+
+	if (isadd == REGISTER) {
+		for_each_cpu_mask(cpu, mask) {
+			s = kmalloc_node(sizeof(struct listener), GFP_KERNEL,
+					 cpu_to_node(cpu));
+			if (!s)
+				goto cleanup;
+			s->pid = pid;
+			INIT_LIST_HEAD(&s->list);
+			s->valid = 1;
+
+			listeners = &per_cpu(listener_array, cpu);
+			down_write(&listeners->sem);
+			list_add(&s->list, &listeners->list);
+			up_write(&listeners->sem);
+		}
+		return 0;
+	}
+
+	/* Deregister or cleanup */
+cleanup:
+	for_each_cpu_mask(cpu, mask) {
+		listeners = &per_cpu(listener_array, cpu);
+		down_write(&listeners->sem);
+		list_for_each_entry_safe(s, tmp, &listeners->list, list) {
+			if (s->pid == pid) {
+				list_del(&s->list);
+				kfree(s);
+				break;
+			}
+		}
+		up_write(&listeners->sem);
+	}
+	return 0;
+}
+
+static int parse(struct nlattr *na, cpumask_t *mask)
+{
+	char *data;
+	int len;
+	int ret;
+
+	if (na == NULL)
+		return 1;
+	len = nla_len(na);
+	if (len > TASKSTATS_CPUMASK_MAXLEN)
+		return -E2BIG;
+	if (len < 1)
+		return -EINVAL;
+	data = kmalloc(len, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+	nla_strlcpy(data, na, len);
+	ret = cpulist_parse(data, *mask);
+	kfree(data);
+	return ret;
+}
+
+static int taskstats_user_cmd(struct sk_buff *skb, struct genl_info *info)
+{
+	int rc = 0;
+	struct sk_buff *rep_skb;
+	struct taskstats stats;
+	void *reply;
+	size_t size;
+	struct nlattr *na;
+	cpumask_t mask;
+
+	rc = parse(info->attrs[TASKSTATS_CMD_ATTR_REGISTER_CPUMASK], &mask);
+	if (rc < 0)
+		return rc;
+	if (rc == 0)
+		return add_del_listener(info->snd_pid, &mask, REGISTER);
+
+	rc = parse(info->attrs[TASKSTATS_CMD_ATTR_DEREGISTER_CPUMASK], &mask);
+	if (rc < 0)
+		return rc;
+	if (rc == 0)
+		return add_del_listener(info->snd_pid, &mask, DEREGISTER);
+
+	/*
+	 * Size includes space for nested attributes
+	 */
+	size = nla_total_size(sizeof(u32)) +
+		nla_total_size(sizeof(struct taskstats)) + nla_total_size(0);
+
+	memset(&stats, 0, sizeof(stats));
+	rc = prepare_reply(info, TASKSTATS_CMD_NEW, &rep_skb, &reply, size);
+	if (rc < 0)
+		return rc;
+
+	if (info->attrs[TASKSTATS_CMD_ATTR_PID]) {
+		u32 pid = nla_get_u32(info->attrs[TASKSTATS_CMD_ATTR_PID]);
+		rc = fill_pid(pid, NULL, &stats);
+		if (rc < 0)
+			goto err;
+
+		na = nla_nest_start(rep_skb, TASKSTATS_TYPE_AGGR_PID);
+		NLA_PUT_U32(rep_skb, TASKSTATS_TYPE_PID, pid);
+		NLA_PUT_TYPE(rep_skb, struct taskstats, TASKSTATS_TYPE_STATS,
+				stats);
+	} else if (info->attrs[TASKSTATS_CMD_ATTR_TGID]) {
+		u32 tgid = nla_get_u32(info->attrs[TASKSTATS_CMD_ATTR_TGID]);
+		rc = fill_tgid(tgid, NULL, &stats);
+		if (rc < 0)
+			goto err;
+
+		na = nla_nest_start(rep_skb, TASKSTATS_TYPE_AGGR_TGID);
+		NLA_PUT_U32(rep_skb, TASKSTATS_TYPE_TGID, tgid);
+		NLA_PUT_TYPE(rep_skb, struct taskstats, TASKSTATS_TYPE_STATS,
+				stats);
+	} else {
+		rc = -EINVAL;
+		goto err;
+	}
+
+	nla_nest_end(rep_skb, na);
+
+	return send_reply(rep_skb, info->snd_pid);
+
+nla_put_failure:
+	return genlmsg_cancel(rep_skb, reply);
+err:
+	nlmsg_free(rep_skb);
+	return rc;
+}
+
+void taskstats_exit_alloc(struct taskstats **ptidstats, unsigned int *mycpu)
+{
+	struct listener_list *listeners;
+	struct taskstats *tmp;
+	/*
+	 * This is the cpu on which the task is exiting currently and will
+	 * be the one for which the exit event is sent, even if the cpu
+	 * on which this function is running changes later.
+	 */
+	*mycpu = raw_smp_processor_id();
+
+	*ptidstats = NULL;
+	tmp = kmem_cache_zalloc(taskstats_cache, SLAB_KERNEL);
+	if (!tmp)
+		return;
+
+	listeners = &per_cpu(listener_array, *mycpu);
+	down_read(&listeners->sem);
+	if (!list_empty(&listeners->list)) {
+		*ptidstats = tmp;
+		tmp = NULL;
+	}
+	up_read(&listeners->sem);
+	kfree(tmp);
+}
+
+/* Send pid data out on exit */
+void taskstats_exit_send(struct task_struct *tsk, struct taskstats *tidstats,
+			int group_dead, unsigned int mycpu)
+{
+	int rc;
+	struct sk_buff *rep_skb;
+	void *reply;
+	size_t size;
+	int is_thread_group;
+	struct nlattr *na;
+	unsigned long flags;
+
+	if (!family_registered || !tidstats)
+		return;
+
+	spin_lock_irqsave(&tsk->signal->stats_lock, flags);
+	is_thread_group = tsk->signal->stats ? 1 : 0;
+	spin_unlock_irqrestore(&tsk->signal->stats_lock, flags);
+
+	rc = 0;
+	/*
+	 * Size includes space for nested attributes
+	 */
+	size = nla_total_size(sizeof(u32)) +
+		nla_total_size(sizeof(struct taskstats)) + nla_total_size(0);
+
+	if (is_thread_group)
+		size = 2 * size;	/* PID + STATS + TGID + STATS */
+
+	rc = prepare_reply(NULL, TASKSTATS_CMD_NEW, &rep_skb, &reply, size);
+	if (rc < 0)
+		goto ret;
+
+	rc = fill_pid(tsk->pid, tsk, tidstats);
+	if (rc < 0)
+		goto err_skb;
+
+	na = nla_nest_start(rep_skb, TASKSTATS_TYPE_AGGR_PID);
+	NLA_PUT_U32(rep_skb, TASKSTATS_TYPE_PID, (u32)tsk->pid);
+	NLA_PUT_TYPE(rep_skb, struct taskstats, TASKSTATS_TYPE_STATS,
+			*tidstats);
+	nla_nest_end(rep_skb, na);
+
+	if (!is_thread_group)
+		goto send;
+
+	/*
+	 * tsk has/had a thread group so fill the tsk->signal->stats structure
+	 * Doesn't matter if tsk is the leader or the last group member leaving
+	 */
+
+	fill_tgid_exit(tsk);
+	if (!group_dead)
+		goto send;
+
+	na = nla_nest_start(rep_skb, TASKSTATS_TYPE_AGGR_TGID);
+	NLA_PUT_U32(rep_skb, TASKSTATS_TYPE_TGID, (u32)tsk->tgid);
+	/* No locking needed for tsk->signal->stats since group is dead */
+	NLA_PUT_TYPE(rep_skb, struct taskstats, TASKSTATS_TYPE_STATS,
+			*tsk->signal->stats);
+	nla_nest_end(rep_skb, na);
+
+send:
+	send_cpu_listeners(rep_skb, mycpu);
+	return;
+
+nla_put_failure:
+	genlmsg_cancel(rep_skb, reply);
+	goto ret;
+err_skb:
+	nlmsg_free(rep_skb);
+ret:
+	return;
+}
+
+static struct genl_ops taskstats_ops = {
+	.cmd		= TASKSTATS_CMD_GET,
+	.doit		= taskstats_user_cmd,
+	.policy		= taskstats_cmd_get_policy,
+};
+
+/* Needed early in initialization */
+void __init taskstats_init_early(void)
+{
+	unsigned int i;
+
+	taskstats_cache = kmem_cache_create("taskstats_cache",
+						sizeof(struct taskstats),
+						0, SLAB_PANIC, NULL, NULL);
+	for_each_possible_cpu(i) {
+		INIT_LIST_HEAD(&(per_cpu(listener_array, i).list));
+		init_rwsem(&(per_cpu(listener_array, i).sem));
+	}
+}
+
+static int __init taskstats_init(void)
+{
+	int rc;
+
+	rc = genl_register_family(&family);
+	if (rc)
+		return rc;
+
+	rc = genl_register_ops(&family, &taskstats_ops);
+	if (rc < 0)
+		goto err;
+
+	family_registered = 1;
+	return 0;
+err:
+	genl_unregister_family(&family);
+	return rc;
+}
+
+/*
+ * late initcall ensures initialization of statistics collection
+ * mechanisms precedes initialization of the taskstats interface
+ */
+late_initcall(taskstats_init);
diff -urN linux-2.6.18-rc1/kernel/timer.c linux-2.6.18-rc2/kernel/timer.c
--- linux-2.6.18-rc1/kernel/timer.c	2006-07-15 22:34:43.829133364 +0000
+++ linux-2.6.18-rc2/kernel/timer.c	2006-07-15 22:34:49.149710903 +0000
@@ -374,6 +374,7 @@
 		int ret = try_to_del_timer_sync(timer);
 		if (ret >= 0)
 			return ret;
+		cpu_relax();
 	}
 }
 
@@ -891,6 +892,7 @@
 	set_normalized_timespec(&xtime, sec, nsec);
 	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
 
+	clock->error = 0;
 	ntp_clear();
 
 	write_sequnlock_irqrestore(&xtime_lock, flags);
@@ -967,6 +969,7 @@
 }
 
 
+static int timekeeping_suspended;
 /*
  * timekeeping_resume - Resumes the generic timekeeping subsystem.
  * @dev:	unused
@@ -982,6 +985,18 @@
 	write_seqlock_irqsave(&xtime_lock, flags);
 	/* restart the last cycle value */
 	clock->cycle_last = clocksource_read(clock);
+	clock->error = 0;
+	timekeeping_suspended = 0;
+	write_sequnlock_irqrestore(&xtime_lock, flags);
+	return 0;
+}
+
+static int timekeeping_suspend(struct sys_device *dev, pm_message_t state)
+{
+	unsigned long flags;
+
+	write_seqlock_irqsave(&xtime_lock, flags);
+	timekeeping_suspended = 1;
 	write_sequnlock_irqrestore(&xtime_lock, flags);
 	return 0;
 }
@@ -989,6 +1004,7 @@
 /* sysfs resume/suspend bits for timekeeping */
 static struct sysdev_class timekeeping_sysclass = {
 	.resume		= timekeeping_resume,
+	.suspend	= timekeeping_suspend,
 	set_kset_name("timekeeping"),
 };
 
@@ -1008,52 +1024,52 @@
 device_initcall(timekeeping_init_device);
 
 /*
- * If the error is already larger, we look ahead another tick,
+ * If the error is already larger, we look ahead even further
  * to compensate for late or lost adjustments.
  */
-static __always_inline int clocksource_bigadjust(int sign, s64 error, s64 *interval, s64 *offset)
+static __always_inline int clocksource_bigadjust(s64 error, s64 *interval, s64 *offset)
 {
-	int adj;
+	s64 tick_error, i;
+	u32 look_ahead, adj;
+	s32 error2, mult;
 
 	/*
-	 * As soon as the machine is synchronized to the external time
-	 * source this should be the common case.
+	 * Use the current error value to determine how much to look ahead.
+	 * The larger the error the slower we adjust for it to avoid problems
+	 * with losing too many ticks, otherwise we would overadjust and
+	 * produce an even larger error.  The smaller the adjustment the
+	 * faster we try to adjust for it, as lost ticks can do less harm
+	 * here.  This is tuned so that an error of about 1 msec is adusted
+	 * within about 1 sec (or 2^20 nsec in 2^SHIFT_HZ ticks).
 	 */
-	error >>= 2;
-	if (likely(sign > 0 ? error <= *interval : error >= *interval))
-		return sign;
+	error2 = clock->error >> (TICK_LENGTH_SHIFT + 22 - 2 * SHIFT_HZ);
+	error2 = abs(error2);
+	for (look_ahead = 0; error2 > 0; look_ahead++)
+		error2 >>= 2;
 
 	/*
-	 * An extra look ahead dampens the effect of the current error,
-	 * which can grow quite large with continously late updates, as
-	 * it would dominate the adjustment value and can lead to
-	 * oscillation.
+	 * Now calculate the error in (1 << look_ahead) ticks, but first
+	 * remove the single look ahead already included in the error.
 	 */
-	error += current_tick_length() >> (TICK_LENGTH_SHIFT - clock->shift + 1);
-	error -= clock->xtime_interval >> 1;
-
-	adj = 0;
-	while (1) {
-		error >>= 1;
-		if (sign > 0 ? error <= *interval : error >= *interval)
-			break;
-		adj++;
+	tick_error = current_tick_length() >> (TICK_LENGTH_SHIFT - clock->shift + 1);
+	tick_error -= clock->xtime_interval >> 1;
+	error = ((error - tick_error) >> look_ahead) + tick_error;
+
+	/* Finally calculate the adjustment shift value.  */
+	i = *interval;
+	mult = 1;
+	if (error < 0) {
+		error = -error;
+		*interval = -*interval;
+		*offset = -*offset;
+		mult = -1;
 	}
-
-	/*
-	 * Add the current adjustments to the error and take the offset
-	 * into account, the latter can cause the error to be hardly
-	 * reduced at the next tick. Check the error again if there's
-	 * room for another adjustment, thus further reducing the error
-	 * which otherwise had to be corrected at the next update.
-	 */
-	error = (error << 1) - *interval + *offset;
-	if (sign > 0 ? error > *interval : error < *interval)
-		adj++;
+	for (adj = 0; error > i; adj++)
+		error >>= 1;
 
 	*interval <<= adj;
 	*offset <<= adj;
-	return sign << adj;
+	return mult << adj;
 }
 
 /*
@@ -1068,11 +1084,19 @@
 
 	error = clock->error >> (TICK_LENGTH_SHIFT - clock->shift - 1);
 	if (error > interval) {
-		adj = clocksource_bigadjust(1, error, &interval, &offset);
+		error >>= 2;
+		if (likely(error <= interval))
+			adj = 1;
+		else
+			adj = clocksource_bigadjust(error, &interval, &offset);
 	} else if (error < -interval) {
-		interval = -interval;
-		offset = -offset;
-		adj = clocksource_bigadjust(-1, error, &interval, &offset);
+		error >>= 2;
+		if (likely(error >= -interval)) {
+			adj = -1;
+			interval = -interval;
+			offset = -offset;
+		} else
+			adj = clocksource_bigadjust(error, &interval, &offset);
 	} else
 		return;
 
@@ -1091,13 +1115,16 @@
 {
 	cycle_t offset;
 
-	clock->xtime_nsec += (s64)xtime.tv_nsec << clock->shift;
+	/* Make sure we're fully resumed: */
+	if (unlikely(timekeeping_suspended))
+		return;
 
 #ifdef CONFIG_GENERIC_TIME
 	offset = (clocksource_read(clock) - clock->cycle_last) & clock->mask;
 #else
 	offset = clock->cycle_interval;
 #endif
+	clock->xtime_nsec += (s64)xtime.tv_nsec << clock->shift;
 
 	/* normally this loop will run just once, however in the
 	 * case of lost or late ticks, it will accumulate correctly.
@@ -1129,7 +1156,7 @@
 	clocksource_adjust(clock, offset);
 
 	/* store full nanoseconds into xtime */
-	xtime.tv_nsec = clock->xtime_nsec >> clock->shift;
+	xtime.tv_nsec = (s64)clock->xtime_nsec >> clock->shift;
 	clock->xtime_nsec -= (s64)xtime.tv_nsec << clock->shift;
 
 	/* check to see if there is a new clocksource to use */
diff -urN linux-2.6.18-rc1/kernel/wait.c linux-2.6.18-rc2/kernel/wait.c
--- linux-2.6.18-rc1/kernel/wait.c	2006-07-15 22:34:43.829133364 +0000
+++ linux-2.6.18-rc2/kernel/wait.c	2006-07-15 22:34:49.149710903 +0000
@@ -10,9 +10,13 @@
 #include <linux/wait.h>
 #include <linux/hash.h>
 
-struct lock_class_key waitqueue_lock_key;
+void init_waitqueue_head(wait_queue_head_t *q)
+{
+	spin_lock_init(&q->lock);
+	INIT_LIST_HEAD(&q->task_list);
+}
 
-EXPORT_SYMBOL(waitqueue_lock_key);
+EXPORT_SYMBOL(init_waitqueue_head);
 
 void fastcall add_wait_queue(wait_queue_head_t *q, wait_queue_t *wait)
 {
diff -urN linux-2.6.18-rc1/lib/Kconfig.debug linux-2.6.18-rc2/lib/Kconfig.debug
--- linux-2.6.18-rc1/lib/Kconfig.debug	2006-07-15 22:34:43.829133364 +0000
+++ linux-2.6.18-rc2/lib/Kconfig.debug	2006-07-15 22:34:49.153711337 +0000
@@ -158,7 +158,7 @@
 
 config DEBUG_LOCK_ALLOC
 	bool "Lock debugging: detect incorrect freeing of live locks"
-	depends on TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
+	depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
 	select DEBUG_SPINLOCK
 	select DEBUG_MUTEXES
 	select DEBUG_RWSEMS
@@ -173,7 +173,7 @@
 
 config PROVE_LOCKING
 	bool "Lock debugging: prove locking correctness"
-	depends on TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
+	depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
 	select LOCKDEP
 	select DEBUG_SPINLOCK
 	select DEBUG_MUTEXES
@@ -216,7 +216,7 @@
 
 config LOCKDEP
 	bool
-	depends on TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
+	depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
 	select STACKTRACE
 	select FRAME_POINTER
 	select KALLSYMS
@@ -224,13 +224,14 @@
 
 config DEBUG_LOCKDEP
 	bool "Lock dependency engine debugging"
-	depends on LOCKDEP
+	depends on DEBUG_KERNEL && LOCKDEP
 	help
 	  If you say Y here, the lock dependency engine will do
 	  additional runtime checks to debug itself, at the price
 	  of more runtime overhead.
 
 config TRACE_IRQFLAGS
+	depends on DEBUG_KERNEL
 	bool
 	default y
 	depends on TRACE_IRQFLAGS_SUPPORT
@@ -256,6 +257,7 @@
 
 config STACKTRACE
 	bool
+	depends on DEBUG_KERNEL
 	depends on STACKTRACE_SUPPORT
 
 config DEBUG_KOBJECT
diff -urN linux-2.6.18-rc1/lib/idr.c linux-2.6.18-rc2/lib/idr.c
--- linux-2.6.18-rc1/lib/idr.c	2006-07-15 22:34:43.833133798 +0000
+++ linux-2.6.18-rc2/lib/idr.c	2006-07-15 22:34:49.153711337 +0000
@@ -38,14 +38,15 @@
 static struct idr_layer *alloc_layer(struct idr *idp)
 {
 	struct idr_layer *p;
+	unsigned long flags;
 
-	spin_lock(&idp->lock);
+	spin_lock_irqsave(&idp->lock, flags);
 	if ((p = idp->id_free)) {
 		idp->id_free = p->ary[0];
 		idp->id_free_cnt--;
 		p->ary[0] = NULL;
 	}
-	spin_unlock(&idp->lock);
+	spin_unlock_irqrestore(&idp->lock, flags);
 	return(p);
 }
 
@@ -59,12 +60,14 @@
 
 static void free_layer(struct idr *idp, struct idr_layer *p)
 {
+	unsigned long flags;
+
 	/*
 	 * Depends on the return element being zeroed.
 	 */
-	spin_lock(&idp->lock);
+	spin_lock_irqsave(&idp->lock, flags);
 	__free_layer(idp, p);
-	spin_unlock(&idp->lock);
+	spin_unlock_irqrestore(&idp->lock, flags);
 }
 
 /**
@@ -168,6 +171,7 @@
 {
 	struct idr_layer *p, *new;
 	int layers, v, id;
+	unsigned long flags;
 
 	id = starting_id;
 build_up:
@@ -191,14 +195,14 @@
 			 * The allocation failed.  If we built part of
 			 * the structure tear it down.
 			 */
-			spin_lock(&idp->lock);
+			spin_lock_irqsave(&idp->lock, flags);
 			for (new = p; p && p != idp->top; new = p) {
 				p = p->ary[0];
 				new->ary[0] = NULL;
 				new->bitmap = new->count = 0;
 				__free_layer(idp, new);
 			}
-			spin_unlock(&idp->lock);
+			spin_unlock_irqrestore(&idp->lock, flags);
 			return -1;
 		}
 		new->ary[0] = p;
diff -urN linux-2.6.18-rc1/mm/bootmem.c linux-2.6.18-rc2/mm/bootmem.c
--- linux-2.6.18-rc1/mm/bootmem.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/mm/bootmem.c	2006-07-15 22:34:49.165712640 +0000
@@ -29,9 +29,7 @@
 unsigned long min_low_pfn;
 unsigned long max_pfn;
 
-EXPORT_SYMBOL(max_pfn);		/* This is exported so
-				 * dma_get_required_mask(), which uses
-				 * it, can be an inline function */
+EXPORT_UNUSED_SYMBOL(max_pfn);  /*  June 2006  */
 
 static LIST_HEAD(bdata_list);
 #ifdef CONFIG_CRASH_DUMP
diff -urN linux-2.6.18-rc1/mm/fadvise.c linux-2.6.18-rc2/mm/fadvise.c
--- linux-2.6.18-rc1/mm/fadvise.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/mm/fadvise.c	2006-07-15 22:34:49.169713074 +0000
@@ -23,18 +23,6 @@
 /*
  * POSIX_FADV_WILLNEED could set PG_Referenced, and POSIX_FADV_NOREUSE could
  * deactivate the pages and clear PG_Referenced.
- *
- * LINUX_FADV_ASYNC_WRITE: start async writeout of any dirty pages between file
- * offsets `offset' and `offset+len' inclusive.  Any pages which are currently
- * under writeout are skipped, whether or not they are dirty.
- *
- * LINUX_FADV_WRITE_WAIT: wait upon writeout of any dirty pages between file
- * offsets `offset' and `offset+len'.
- *
- * By combining these two operations the application may do several things:
- *
- * LINUX_FADV_ASYNC_WRITE: push some or all of the dirty pages at the disk.
- *
  */
 asmlinkage long sys_fadvise64_64(int fd, loff_t offset, loff_t len, int advice)
 {
diff -urN linux-2.6.18-rc1/mm/memory.c linux-2.6.18-rc2/mm/memory.c
--- linux-2.6.18-rc1/mm/memory.c	2006-07-15 22:34:43.849135535 +0000
+++ linux-2.6.18-rc2/mm/memory.c	2006-07-15 22:34:49.169713074 +0000
@@ -47,6 +47,7 @@
 #include <linux/pagemap.h>
 #include <linux/rmap.h>
 #include <linux/module.h>
+#include <linux/delayacct.h>
 #include <linux/init.h>
 
 #include <asm/pgalloc.h>
@@ -1549,9 +1550,9 @@
 		flush_cache_page(vma, address, pte_pfn(orig_pte));
 		entry = mk_pte(new_page, vma->vm_page_prot);
 		entry = maybe_mkwrite(pte_mkdirty(entry), vma);
+		lazy_mmu_prot_update(entry);
 		ptep_establish(vma, address, page_table, entry);
 		update_mmu_cache(vma, address, entry);
-		lazy_mmu_prot_update(entry);
 		lru_cache_add_active(new_page);
 		page_add_new_anon_rmap(new_page, vma, address);
 
@@ -1853,7 +1854,7 @@
 
 	return 0;
 }
-EXPORT_SYMBOL(vmtruncate_range);
+EXPORT_UNUSED_SYMBOL(vmtruncate_range);  /*  June 2006  */
 
 /* 
  * Primitive swap readahead code. We simply read an aligned block of
@@ -1934,6 +1935,7 @@
 		migration_entry_wait(mm, pmd, address);
 		goto out;
 	}
+	delayacct_set_flag(DELAYACCT_PF_SWAPIN);
 	page = lookup_swap_cache(entry);
 	if (!page) {
  		swapin_readahead(entry, address, vma);
@@ -1946,6 +1948,7 @@
 			page_table = pte_offset_map_lock(mm, pmd, address, &ptl);
 			if (likely(pte_same(*page_table, orig_pte)))
 				ret = VM_FAULT_OOM;
+			delayacct_clear_flag(DELAYACCT_PF_SWAPIN);
 			goto unlock;
 		}
 
@@ -1955,6 +1958,7 @@
 		grab_swap_token();
 	}
 
+	delayacct_clear_flag(DELAYACCT_PF_SWAPIN);
 	mark_page_accessed(page);
 	lock_page(page);
 
diff -urN linux-2.6.18-rc1/mm/mmzone.c linux-2.6.18-rc2/mm/mmzone.c
--- linux-2.6.18-rc1/mm/mmzone.c	2006-07-15 22:34:43.853135969 +0000
+++ linux-2.6.18-rc2/mm/mmzone.c	2006-07-15 22:34:49.173713508 +0000
@@ -14,7 +14,7 @@
 	return NODE_DATA(first_online_node);
 }
 
-EXPORT_SYMBOL(first_online_pgdat);
+EXPORT_UNUSED_SYMBOL(first_online_pgdat);  /*  June 2006  */
 
 struct pglist_data *next_online_pgdat(struct pglist_data *pgdat)
 {
@@ -24,7 +24,7 @@
 		return NULL;
 	return NODE_DATA(nid);
 }
-EXPORT_SYMBOL(next_online_pgdat);
+EXPORT_UNUSED_SYMBOL(next_online_pgdat);  /*  June 2006  */
 
 
 /*
@@ -45,5 +45,5 @@
 	}
 	return zone;
 }
-EXPORT_SYMBOL(next_zone);
+EXPORT_UNUSED_SYMBOL(next_zone);  /*  June 2006  */
 
diff -urN linux-2.6.18-rc1/mm/nommu.c linux-2.6.18-rc2/mm/nommu.c
--- linux-2.6.18-rc1/mm/nommu.c	2006-07-15 22:34:43.853135969 +0000
+++ linux-2.6.18-rc2/mm/nommu.c	2006-07-15 22:34:49.173713508 +0000
@@ -1070,6 +1070,7 @@
 	vma->vm_start = vma->vm_pgoff << PAGE_SHIFT;
 	return 0;
 }
+EXPORT_SYMBOL(remap_pfn_range);
 
 void swap_unplug_io_fn(struct backing_dev_info *bdi, struct page *page)
 {
@@ -1090,6 +1091,7 @@
 			 int even_cows)
 {
 }
+EXPORT_SYMBOL(unmap_mapping_range);
 
 /*
  * Check that a process has enough memory to allocate a new virtual
diff -urN linux-2.6.18-rc1/mm/slab.c linux-2.6.18-rc2/mm/slab.c
--- linux-2.6.18-rc1/mm/slab.c	2006-07-15 22:34:43.861136838 +0000
+++ linux-2.6.18-rc2/mm/slab.c	2006-07-15 22:34:49.181714377 +0000
@@ -674,6 +674,37 @@
 #endif
 };
 
+#ifdef CONFIG_LOCKDEP
+
+/*
+ * Slab sometimes uses the kmalloc slabs to store the slab headers
+ * for other slabs "off slab".
+ * The locking for this is tricky in that it nests within the locks
+ * of all other slabs in a few places; to deal with this special
+ * locking we put on-slab caches into a separate lock-class.
+ */
+static struct lock_class_key on_slab_key;
+
+static inline void init_lock_keys(struct cache_sizes *s)
+{
+	int q;
+
+	for (q = 0; q < MAX_NUMNODES; q++) {
+		if (!s->cs_cachep->nodelists[q] || OFF_SLAB(s->cs_cachep))
+			continue;
+		lockdep_set_class(&s->cs_cachep->nodelists[q]->list_lock,
+				  &on_slab_key);
+	}
+}
+
+#else
+static inline void init_lock_keys(struct cache_sizes *s)
+{
+}
+#endif
+
+
+
 /* Guard access to the cache-chain. */
 static DEFINE_MUTEX(cache_chain_mutex);
 static struct list_head cache_chain;
@@ -1021,8 +1052,7 @@
 	}
 }
 
-static inline int cache_free_alien(struct kmem_cache *cachep, void *objp,
-				   int nesting)
+static inline int cache_free_alien(struct kmem_cache *cachep, void *objp)
 {
 	struct slab *slabp = virt_to_slab(objp);
 	int nodeid = slabp->nodeid;
@@ -1040,7 +1070,7 @@
 	STATS_INC_NODEFREES(cachep);
 	if (l3->alien && l3->alien[nodeid]) {
 		alien = l3->alien[nodeid];
-		spin_lock_nested(&alien->lock, nesting);
+		spin_lock(&alien->lock);
 		if (unlikely(alien->avail == alien->limit)) {
 			STATS_INC_ACOVERFLOW(cachep);
 			__drain_alien_cache(cachep, alien, nodeid);
@@ -1069,8 +1099,7 @@
 {
 }
 
-static inline int cache_free_alien(struct kmem_cache *cachep, void *objp,
-				   int nesting)
+static inline int cache_free_alien(struct kmem_cache *cachep, void *objp)
 {
 	return 0;
 }
@@ -1393,6 +1422,7 @@
 					ARCH_KMALLOC_FLAGS|SLAB_PANIC,
 					NULL, NULL);
 		}
+		init_lock_keys(sizes);
 
 		sizes->cs_dmacachep = kmem_cache_create(names->name_dma,
 					sizes->cs_size,
@@ -1760,8 +1790,6 @@
 }
 #endif
 
-static void __cache_free(struct kmem_cache *cachep, void *objp, int nesting);
-
 /**
  * slab_destroy - destroy and release all objects in a slab
  * @cachep: cache pointer being destroyed
@@ -1785,17 +1813,8 @@
 		call_rcu(&slab_rcu->head, kmem_rcu_free);
 	} else {
 		kmem_freepages(cachep, addr);
-		if (OFF_SLAB(cachep)) {
-			unsigned long flags;
-
-			/*
-		 	 * lockdep: we may nest inside an already held
-			 * ac->lock, so pass in a nesting flag:
-			 */
-			local_irq_save(flags);
-			__cache_free(cachep->slabp_cache, slabp, 1);
-			local_irq_restore(flags);
-		}
+		if (OFF_SLAB(cachep))
+			kmem_cache_free(cachep->slabp_cache, slabp);
 	}
 }
 
@@ -3100,16 +3119,7 @@
 		if (slabp->inuse == 0) {
 			if (l3->free_objects > l3->free_limit) {
 				l3->free_objects -= cachep->num;
-				/*
-				 * It is safe to drop the lock. The slab is
-				 * no longer linked to the cache. cachep
-				 * cannot disappear - we are using it and
-				 * all destruction of caches must be
-				 * serialized properly by the user.
-				 */
-				spin_unlock(&l3->list_lock);
 				slab_destroy(cachep, slabp);
-				spin_lock(&l3->list_lock);
 			} else {
 				list_add(&slabp->list, &l3->slabs_free);
 			}
@@ -3135,7 +3145,7 @@
 #endif
 	check_irq_off();
 	l3 = cachep->nodelists[node];
-	spin_lock_nested(&l3->list_lock, SINGLE_DEPTH_NESTING);
+	spin_lock(&l3->list_lock);
 	if (l3->shared) {
 		struct array_cache *shared_array = l3->shared;
 		int max = shared_array->limit - shared_array->avail;
@@ -3178,14 +3188,14 @@
  * Release an obj back to its cache. If the obj has a constructed state, it must
  * be in this state _before_ it is released.  Called with disabled ints.
  */
-static void __cache_free(struct kmem_cache *cachep, void *objp, int nesting)
+static inline void __cache_free(struct kmem_cache *cachep, void *objp)
 {
 	struct array_cache *ac = cpu_cache_get(cachep);
 
 	check_irq_off();
 	objp = cache_free_debugcheck(cachep, objp, __builtin_return_address(0));
 
-	if (cache_free_alien(cachep, objp, nesting))
+	if (cache_free_alien(cachep, objp))
 		return;
 
 	if (likely(ac->avail < ac->limit)) {
@@ -3424,7 +3434,7 @@
 	BUG_ON(virt_to_cache(objp) != cachep);
 
 	local_irq_save(flags);
-	__cache_free(cachep, objp, 0);
+	__cache_free(cachep, objp);
 	local_irq_restore(flags);
 }
 EXPORT_SYMBOL(kmem_cache_free);
@@ -3449,7 +3459,7 @@
 	kfree_debugcheck(objp);
 	c = virt_to_cache(objp);
 	debug_check_no_locks_freed(objp, obj_size(c));
-	__cache_free(c, (void *)objp, 0);
+	__cache_free(c, (void *)objp);
 	local_irq_restore(flags);
 }
 EXPORT_SYMBOL(kfree);
diff -urN linux-2.6.18-rc1/mm/vmalloc.c linux-2.6.18-rc2/mm/vmalloc.c
--- linux-2.6.18-rc1/mm/vmalloc.c	2006-07-15 22:34:43.861136838 +0000
+++ linux-2.6.18-rc2/mm/vmalloc.c	2006-07-15 22:34:49.185714811 +0000
@@ -340,7 +340,7 @@
 			__free_page(area->pages[i]);
 		}
 
-		if (area->nr_pages > PAGE_SIZE/sizeof(struct page *))
+		if (area->flags & VM_VPAGES)
 			vfree(area->pages);
 		else
 			kfree(area->pages);
@@ -427,9 +427,10 @@
 
 	area->nr_pages = nr_pages;
 	/* Please note that the recursion is strictly bounded. */
-	if (array_size > PAGE_SIZE)
+	if (array_size > PAGE_SIZE) {
 		pages = __vmalloc_node(array_size, gfp_mask, PAGE_KERNEL, node);
-	else
+		area->flags |= VM_VPAGES;
+	} else
 		pages = kmalloc_node(array_size, (gfp_mask & ~__GFP_HIGHMEM), node);
 	area->pages = pages;
 	if (!area->pages) {
diff -urN linux-2.6.18-rc1/mm/vmstat.c linux-2.6.18-rc2/mm/vmstat.c
--- linux-2.6.18-rc1/mm/vmstat.c	2006-07-15 22:34:43.865137272 +0000
+++ linux-2.6.18-rc2/mm/vmstat.c	2006-07-15 22:34:49.185714811 +0000
@@ -81,6 +81,7 @@
 {
 	sum_vm_events(ret, &cpu_online_map);
 }
+EXPORT_SYMBOL_GPL(all_vm_events);
 
 #ifdef CONFIG_HOTPLUG
 /*
diff -urN linux-2.6.18-rc1/net/atm/clip.c linux-2.6.18-rc2/net/atm/clip.c
--- linux-2.6.18-rc1/net/atm/clip.c	2006-07-15 22:34:43.869137706 +0000
+++ linux-2.6.18-rc2/net/atm/clip.c	2006-07-15 22:34:49.189715245 +0000
@@ -962,7 +962,6 @@
 
 static int __init atm_clip_init(void)
 {
-	struct proc_dir_entry *p;
 	neigh_table_init_no_netlink(&clip_tbl);
 
 	clip_tbl_hook = &clip_tbl;
@@ -972,9 +971,15 @@
 
 	setup_timer(&idle_timer, idle_timer_check, 0);
 
-	p = create_proc_entry("arp", S_IRUGO, atm_proc_root);
-	if (p)
-		p->proc_fops = &arp_seq_fops;
+#ifdef CONFIG_PROC_FS
+	{
+		struct proc_dir_entry *p;
+
+		p = create_proc_entry("arp", S_IRUGO, atm_proc_root);
+		if (p)
+			p->proc_fops = &arp_seq_fops;
+	}
+#endif
 
 	return 0;
 }
diff -urN linux-2.6.18-rc1/net/atm/ipcommon.c linux-2.6.18-rc2/net/atm/ipcommon.c
--- linux-2.6.18-rc1/net/atm/ipcommon.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/net/atm/ipcommon.c	2006-07-15 22:34:49.189715245 +0000
@@ -25,22 +25,27 @@
 /*
  * skb_migrate appends the list at "from" to "to", emptying "from" in the
  * process. skb_migrate is atomic with respect to all other skb operations on
- * "from" and "to". Note that it locks both lists at the same time, so beware
- * of potential deadlocks.
+ * "from" and "to". Note that it locks both lists at the same time, so to deal
+ * with the lock ordering, the locks are taken in address order.
  *
  * This function should live in skbuff.c or skbuff.h.
  */
 
 
-void skb_migrate(struct sk_buff_head *from,struct sk_buff_head *to)
+void skb_migrate(struct sk_buff_head *from, struct sk_buff_head *to)
 {
 	unsigned long flags;
 	struct sk_buff *skb_from = (struct sk_buff *) from;
 	struct sk_buff *skb_to = (struct sk_buff *) to;
 	struct sk_buff *prev;
 
-	spin_lock_irqsave(&from->lock,flags);
-	spin_lock(&to->lock);
+	if ((unsigned long) from < (unsigned long) to) {
+		spin_lock_irqsave(&from->lock, flags);
+		spin_lock_nested(&to->lock, SINGLE_DEPTH_NESTING);
+	} else {
+		spin_lock_irqsave(&to->lock, flags);
+		spin_lock_nested(&from->lock, SINGLE_DEPTH_NESTING);
+	}
 	prev = from->prev;
 	from->next->prev = to->prev;
 	prev->next = skb_to;
@@ -51,7 +56,7 @@
 	from->prev = skb_from;
 	from->next = skb_from;
 	from->qlen = 0;
-	spin_unlock_irqrestore(&from->lock,flags);
+	spin_unlock_irqrestore(&from->lock, flags);
 }
 
 
diff -urN linux-2.6.18-rc1/net/ax25/af_ax25.c linux-2.6.18-rc2/net/ax25/af_ax25.c
--- linux-2.6.18-rc1/net/ax25/af_ax25.c	2006-07-15 22:34:43.873138140 +0000
+++ linux-2.6.18-rc2/net/ax25/af_ax25.c	2006-07-15 22:34:49.197716114 +0000
@@ -145,7 +145,7 @@
 	ax25_cb *s;
 	struct hlist_node *node;
 
-	spin_lock_bh(&ax25_list_lock);
+	spin_lock(&ax25_list_lock);
 	ax25_for_each(s, node, &ax25_list) {
 		if ((s->iamdigi && !digi) || (!s->iamdigi && digi))
 			continue;
@@ -154,12 +154,12 @@
 			/* If device is null we match any device */
 			if (s->ax25_dev == NULL || s->ax25_dev->dev == dev) {
 				sock_hold(s->sk);
-				spin_unlock_bh(&ax25_list_lock);
+				spin_unlock(&ax25_list_lock);
 				return s->sk;
 			}
 		}
 	}
-	spin_unlock_bh(&ax25_list_lock);
+	spin_unlock(&ax25_list_lock);
 
 	return NULL;
 }
@@ -174,7 +174,7 @@
 	ax25_cb *s;
 	struct hlist_node *node;
 
-	spin_lock_bh(&ax25_list_lock);
+	spin_lock(&ax25_list_lock);
 	ax25_for_each(s, node, &ax25_list) {
 		if (s->sk && !ax25cmp(&s->source_addr, my_addr) &&
 		    !ax25cmp(&s->dest_addr, dest_addr) &&
@@ -185,7 +185,7 @@
 		}
 	}
 
-	spin_unlock_bh(&ax25_list_lock);
+	spin_unlock(&ax25_list_lock);
 
 	return sk;
 }
@@ -235,7 +235,7 @@
 	struct sk_buff *copy;
 	struct hlist_node *node;
 
-	spin_lock_bh(&ax25_list_lock);
+	spin_lock(&ax25_list_lock);
 	ax25_for_each(s, node, &ax25_list) {
 		if (s->sk != NULL && ax25cmp(&s->source_addr, addr) == 0 &&
 		    s->sk->sk_type == SOCK_RAW &&
@@ -248,7 +248,7 @@
 				kfree_skb(copy);
 		}
 	}
-	spin_unlock_bh(&ax25_list_lock);
+	spin_unlock(&ax25_list_lock);
 }
 
 /*
@@ -486,10 +486,9 @@
 {
 	ax25_cb *ax25;
 
-	if ((ax25 = kmalloc(sizeof(*ax25), GFP_ATOMIC)) == NULL)
+	if ((ax25 = kzalloc(sizeof(*ax25), GFP_ATOMIC)) == NULL)
 		return NULL;
 
-	memset(ax25, 0x00, sizeof(*ax25));
 	atomic_set(&ax25->refcount, 1);
 
 	skb_queue_head_init(&ax25->write_queue);
diff -urN linux-2.6.18-rc1/net/ax25/ax25_dev.c linux-2.6.18-rc2/net/ax25/ax25_dev.c
--- linux-2.6.18-rc1/net/ax25/ax25_dev.c	2006-07-15 22:34:43.873138140 +0000
+++ linux-2.6.18-rc2/net/ax25/ax25_dev.c	2006-07-15 22:34:49.197716114 +0000
@@ -55,15 +55,13 @@
 {
 	ax25_dev *ax25_dev;
 
-	if ((ax25_dev = kmalloc(sizeof(*ax25_dev), GFP_ATOMIC)) == NULL) {
+	if ((ax25_dev = kzalloc(sizeof(*ax25_dev), GFP_ATOMIC)) == NULL) {
 		printk(KERN_ERR "AX.25: ax25_dev_device_up - out of memory\n");
 		return;
 	}
 
 	ax25_unregister_sysctl();
 
-	memset(ax25_dev, 0x00, sizeof(*ax25_dev));
-
 	dev->ax25_ptr     = ax25_dev;
 	ax25_dev->dev     = dev;
 	dev_hold(dev);
diff -urN linux-2.6.18-rc1/net/ax25/ax25_ds_subr.c linux-2.6.18-rc2/net/ax25/ax25_ds_subr.c
--- linux-2.6.18-rc1/net/ax25/ax25_ds_subr.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/net/ax25/ax25_ds_subr.c	2006-07-15 22:34:49.197716114 +0000
@@ -80,7 +80,7 @@
 	ax25_start_t3timer(ax25);
 	ax25_ds_set_timer(ax25->ax25_dev);
 
-	spin_lock_bh(&ax25_list_lock);
+	spin_lock(&ax25_list_lock);
 	ax25_for_each(ax25o, node, &ax25_list) {
 		if (ax25o == ax25)
 			continue;
@@ -106,7 +106,7 @@
 		if (ax25o->state != AX25_STATE_0)
 			ax25_start_t3timer(ax25o);
 	}
-	spin_unlock_bh(&ax25_list_lock);
+	spin_unlock(&ax25_list_lock);
 }
 
 void ax25_ds_establish_data_link(ax25_cb *ax25)
@@ -162,13 +162,13 @@
 	int res = 0;
 	struct hlist_node *node;
 
-	spin_lock_bh(&ax25_list_lock);
+	spin_lock(&ax25_list_lock);
 	ax25_for_each(ax25, node, &ax25_list)
 		if (ax25->ax25_dev == ax25_dev && (ax25->condition & AX25_COND_DAMA_MODE) && ax25->state > AX25_STATE_1) {
 			res = 1;
 			break;
 		}
-	spin_unlock_bh(&ax25_list_lock);
+	spin_unlock(&ax25_list_lock);
 
 	return res;
 }
diff -urN linux-2.6.18-rc1/net/ax25/ax25_ds_timer.c linux-2.6.18-rc2/net/ax25/ax25_ds_timer.c
--- linux-2.6.18-rc1/net/ax25/ax25_ds_timer.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/net/ax25/ax25_ds_timer.c	2006-07-15 22:34:49.197716114 +0000
@@ -85,7 +85,7 @@
 		return;
 	}
 
-	spin_lock_bh(&ax25_list_lock);
+	spin_lock(&ax25_list_lock);
 	ax25_for_each(ax25, node, &ax25_list) {
 		if (ax25->ax25_dev != ax25_dev || !(ax25->condition & AX25_COND_DAMA_MODE))
 			continue;
@@ -93,7 +93,7 @@
 		ax25_send_control(ax25, AX25_DISC, AX25_POLLON, AX25_COMMAND);
 		ax25_disconnect(ax25, ETIMEDOUT);
 	}
-	spin_unlock_bh(&ax25_list_lock);
+	spin_unlock(&ax25_list_lock);
 
 	ax25_dev_dama_off(ax25_dev);
 }
diff -urN linux-2.6.18-rc1/net/ax25/ax25_iface.c linux-2.6.18-rc2/net/ax25/ax25_iface.c
--- linux-2.6.18-rc1/net/ax25/ax25_iface.c	2006-07-15 22:34:43.873138140 +0000
+++ linux-2.6.18-rc2/net/ax25/ax25_iface.c	2006-07-15 22:34:49.197716114 +0000
@@ -66,10 +66,10 @@
 	protocol->pid  = pid;
 	protocol->func = func;
 
-	write_lock(&protocol_list_lock);
+	write_lock_bh(&protocol_list_lock);
 	protocol->next = protocol_list;
 	protocol_list  = protocol;
-	write_unlock(&protocol_list_lock);
+	write_unlock_bh(&protocol_list_lock);
 
 	return 1;
 }
@@ -80,16 +80,16 @@
 {
 	struct protocol_struct *s, *protocol;
 
-	write_lock(&protocol_list_lock);
+	write_lock_bh(&protocol_list_lock);
 	protocol = protocol_list;
 	if (protocol == NULL) {
-		write_unlock(&protocol_list_lock);
+		write_unlock_bh(&protocol_list_lock);
 		return;
 	}
 
 	if (protocol->pid == pid) {
 		protocol_list = protocol->next;
-		write_unlock(&protocol_list_lock);
+		write_unlock_bh(&protocol_list_lock);
 		kfree(protocol);
 		return;
 	}
@@ -98,14 +98,14 @@
 		if (protocol->next->pid == pid) {
 			s = protocol->next;
 			protocol->next = protocol->next->next;
-			write_unlock(&protocol_list_lock);
+			write_unlock_bh(&protocol_list_lock);
 			kfree(s);
 			return;
 		}
 
 		protocol = protocol->next;
 	}
-	write_unlock(&protocol_list_lock);
+	write_unlock_bh(&protocol_list_lock);
 }
 
 EXPORT_SYMBOL(ax25_protocol_release);
@@ -266,13 +266,13 @@
 	struct protocol_struct *protocol;
 	int res = 0;
 
-	read_lock(&protocol_list_lock);
+	read_lock_bh(&protocol_list_lock);
 	for (protocol = protocol_list; protocol != NULL; protocol = protocol->next)
 		if (protocol->pid == pid) {
 			res = 1;
 			break;
 		}
-	read_unlock(&protocol_list_lock);
+	read_unlock_bh(&protocol_list_lock);
 
 	return res;
 }
diff -urN linux-2.6.18-rc1/net/ax25/ax25_in.c linux-2.6.18-rc2/net/ax25/ax25_in.c
--- linux-2.6.18-rc1/net/ax25/ax25_in.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/net/ax25/ax25_in.c	2006-07-15 22:34:49.197716114 +0000
@@ -102,8 +102,8 @@
 int ax25_rx_iframe(ax25_cb *ax25, struct sk_buff *skb)
 {
 	int (*func)(struct sk_buff *, ax25_cb *);
-	volatile int queued = 0;
 	unsigned char pid;
+	int queued = 0;
 
 	if (skb == NULL) return 0;
 
diff -urN linux-2.6.18-rc1/net/bluetooth/cmtp/capi.c linux-2.6.18-rc2/net/bluetooth/cmtp/capi.c
--- linux-2.6.18-rc1/net/bluetooth/cmtp/capi.c	2006-07-15 22:34:43.873138140 +0000
+++ linux-2.6.18-rc2/net/bluetooth/cmtp/capi.c	2006-07-15 22:34:49.197716114 +0000
@@ -75,15 +75,13 @@
 
 static struct cmtp_application *cmtp_application_add(struct cmtp_session *session, __u16 appl)
 {
-	struct cmtp_application *app = kmalloc(sizeof(*app), GFP_KERNEL);
+	struct cmtp_application *app = kzalloc(sizeof(*app), GFP_KERNEL);
 
 	BT_DBG("session %p application %p appl %d", session, app, appl);
 
 	if (!app)
 		return NULL;
 
-	memset(app, 0, sizeof(*app));
-
 	app->state = BT_OPEN;
 	app->appl = appl;
 
diff -urN linux-2.6.18-rc1/net/bluetooth/cmtp/core.c linux-2.6.18-rc2/net/bluetooth/cmtp/core.c
--- linux-2.6.18-rc1/net/bluetooth/cmtp/core.c	2006-07-15 22:34:43.873138140 +0000
+++ linux-2.6.18-rc2/net/bluetooth/cmtp/core.c	2006-07-15 22:34:49.197716114 +0000
@@ -335,10 +335,9 @@
 	baswap(&src, &bt_sk(sock->sk)->src);
 	baswap(&dst, &bt_sk(sock->sk)->dst);
 
-	session = kmalloc(sizeof(struct cmtp_session), GFP_KERNEL);
+	session = kzalloc(sizeof(struct cmtp_session), GFP_KERNEL);
 	if (!session) 
 		return -ENOMEM;
-	memset(session, 0, sizeof(struct cmtp_session));
 
 	down_write(&cmtp_session_sem);
 
diff -urN linux-2.6.18-rc1/net/bluetooth/hci_core.c linux-2.6.18-rc2/net/bluetooth/hci_core.c
--- linux-2.6.18-rc1/net/bluetooth/hci_core.c	2006-07-15 22:34:43.877138575 +0000
+++ linux-2.6.18-rc2/net/bluetooth/hci_core.c	2006-07-15 22:34:49.201716548 +0000
@@ -336,9 +336,8 @@
 
 	if (!(e = hci_inquiry_cache_lookup(hdev, &data->bdaddr))) {
 		/* Entry not in the cache. Add new one. */
-		if (!(e = kmalloc(sizeof(struct inquiry_entry), GFP_ATOMIC)))
+		if (!(e = kzalloc(sizeof(struct inquiry_entry), GFP_ATOMIC)))
 			return;
-		memset(e, 0, sizeof(struct inquiry_entry));
 		e->next     = cache->list;
 		cache->list = e;
 	}
@@ -800,12 +799,10 @@
 {
 	struct hci_dev *hdev;
 
-	hdev = kmalloc(sizeof(struct hci_dev), GFP_KERNEL);
+	hdev = kzalloc(sizeof(struct hci_dev), GFP_KERNEL);
 	if (!hdev)
 		return NULL;
 
-	memset(hdev, 0, sizeof(struct hci_dev));
-
 	skb_queue_head_init(&hdev->driver_init);
 
 	return hdev;
diff -urN linux-2.6.18-rc1/net/bluetooth/hidp/Kconfig linux-2.6.18-rc2/net/bluetooth/hidp/Kconfig
--- linux-2.6.18-rc1/net/bluetooth/hidp/Kconfig	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/net/bluetooth/hidp/Kconfig	2006-07-15 22:34:49.201716548 +0000
@@ -1,7 +1,6 @@
 config BT_HIDP
 	tristate "HIDP protocol support"
-	depends on BT && BT_L2CAP && (BROKEN || !S390)
-	select INPUT
+	depends on BT && BT_L2CAP && INPUT
 	help
 	  HIDP (Human Interface Device Protocol) is a transport layer
 	  for HID reports.  HIDP is required for the Bluetooth Human
diff -urN linux-2.6.18-rc1/net/bluetooth/hidp/core.c linux-2.6.18-rc2/net/bluetooth/hidp/core.c
--- linux-2.6.18-rc1/net/bluetooth/hidp/core.c	2006-07-15 22:34:43.877138575 +0000
+++ linux-2.6.18-rc2/net/bluetooth/hidp/core.c	2006-07-15 22:34:49.201716548 +0000
@@ -582,10 +582,9 @@
 			bacmp(&bt_sk(ctrl_sock->sk)->dst, &bt_sk(intr_sock->sk)->dst))
 		return -ENOTUNIQ;
 
-	session = kmalloc(sizeof(struct hidp_session), GFP_KERNEL);
+	session = kzalloc(sizeof(struct hidp_session), GFP_KERNEL);
 	if (!session)
 		return -ENOMEM;
-	memset(session, 0, sizeof(struct hidp_session));
 
 	session->input = input_allocate_device();
 	if (!session->input) {
diff -urN linux-2.6.18-rc1/net/bluetooth/l2cap.c linux-2.6.18-rc2/net/bluetooth/l2cap.c
--- linux-2.6.18-rc1/net/bluetooth/l2cap.c	2006-07-15 22:34:43.877138575 +0000
+++ linux-2.6.18-rc2/net/bluetooth/l2cap.c	2006-07-15 22:34:49.201716548 +0000
@@ -185,7 +185,7 @@
 {
 	struct sock *next = l2cap_pi(sk)->next_c, *prev = l2cap_pi(sk)->prev_c;
 
-	write_lock(&l->lock);
+	write_lock_bh(&l->lock);
 	if (sk == l->head)
 		l->head = next;
 
@@ -193,7 +193,7 @@
 		l2cap_pi(next)->prev_c = prev;
 	if (prev)
 		l2cap_pi(prev)->next_c = next;
-	write_unlock(&l->lock);
+	write_unlock_bh(&l->lock);
 
 	__sock_put(sk);
 }
@@ -313,9 +313,9 @@
 static inline void l2cap_chan_add(struct l2cap_conn *conn, struct sock *sk, struct sock *parent)
 {
 	struct l2cap_chan_list *l = &conn->chan_list;
-	write_lock(&l->lock);
+	write_lock_bh(&l->lock);
 	__l2cap_chan_add(conn, sk, parent);
-	write_unlock(&l->lock);
+	write_unlock_bh(&l->lock);
 }
 
 static inline u8 l2cap_get_ident(struct l2cap_conn *conn)
@@ -328,14 +328,14 @@
 	 *  200 - 254 are used by utilities like l2ping, etc.
 	 */
 
-	spin_lock(&conn->lock);
+	spin_lock_bh(&conn->lock);
 
 	if (++conn->tx_ident > 128)
 		conn->tx_ident = 1;
 
 	id = conn->tx_ident;
 
-	spin_unlock(&conn->lock);
+	spin_unlock_bh(&conn->lock);
 
 	return id;
 }
@@ -1416,11 +1416,11 @@
 	if (!sk)
 		goto response;
 
-	write_lock(&list->lock);
+	write_lock_bh(&list->lock);
 
 	/* Check if we already have channel with that dcid */
 	if (__l2cap_get_chan_by_dcid(list, scid)) {
-		write_unlock(&list->lock);
+		write_unlock_bh(&list->lock);
 		sock_set_flag(sk, SOCK_ZAPPED);
 		l2cap_sock_kill(sk);
 		goto response;
@@ -1458,7 +1458,7 @@
 	result = status = 0;
 
 done:
-	write_unlock(&list->lock);
+	write_unlock_bh(&list->lock);
 
 response:
 	bh_unlock_sock(parent);
diff -urN linux-2.6.18-rc1/net/bluetooth/rfcomm/core.c linux-2.6.18-rc2/net/bluetooth/rfcomm/core.c
--- linux-2.6.18-rc1/net/bluetooth/rfcomm/core.c	2006-07-15 22:34:43.881139009 +0000
+++ linux-2.6.18-rc2/net/bluetooth/rfcomm/core.c	2006-07-15 22:34:49.205716982 +0000
@@ -273,10 +273,10 @@
 
 struct rfcomm_dlc *rfcomm_dlc_alloc(gfp_t prio)
 {
-	struct rfcomm_dlc *d = kmalloc(sizeof(*d), prio);
+	struct rfcomm_dlc *d = kzalloc(sizeof(*d), prio);
+
 	if (!d)
 		return NULL;
-	memset(d, 0, sizeof(*d));
 
 	init_timer(&d->timer);
 	d->timer.function = rfcomm_dlc_timeout;
@@ -289,6 +289,7 @@
 	rfcomm_dlc_clear_state(d);
 	
 	BT_DBG("%p", d);
+
 	return d;
 }
 
@@ -522,10 +523,10 @@
 /* ---- RFCOMM sessions ---- */
 static struct rfcomm_session *rfcomm_session_add(struct socket *sock, int state)
 {
-	struct rfcomm_session *s = kmalloc(sizeof(*s), GFP_KERNEL);
+	struct rfcomm_session *s = kzalloc(sizeof(*s), GFP_KERNEL);
+
 	if (!s)
 		return NULL;
-	memset(s, 0, sizeof(*s));
 
 	BT_DBG("session %p sock %p", s, sock);
 
diff -urN linux-2.6.18-rc1/net/bluetooth/rfcomm/tty.c linux-2.6.18-rc2/net/bluetooth/rfcomm/tty.c
--- linux-2.6.18-rc1/net/bluetooth/rfcomm/tty.c	2006-07-15 22:34:43.881139009 +0000
+++ linux-2.6.18-rc2/net/bluetooth/rfcomm/tty.c	2006-07-15 22:34:49.205716982 +0000
@@ -169,10 +169,9 @@
 
 	BT_DBG("id %d channel %d", req->dev_id, req->channel);
 	
-	dev = kmalloc(sizeof(struct rfcomm_dev), GFP_KERNEL);
+	dev = kzalloc(sizeof(struct rfcomm_dev), GFP_KERNEL);
 	if (!dev)
 		return -ENOMEM;
-	memset(dev, 0, sizeof(struct rfcomm_dev));
 
 	write_lock_bh(&rfcomm_dev_lock);
 
diff -urN linux-2.6.18-rc1/net/bluetooth/sco.c linux-2.6.18-rc2/net/bluetooth/sco.c
--- linux-2.6.18-rc1/net/bluetooth/sco.c	2006-07-15 22:34:43.881139009 +0000
+++ linux-2.6.18-rc2/net/bluetooth/sco.c	2006-07-15 22:34:49.205716982 +0000
@@ -108,17 +108,14 @@
 static struct sco_conn *sco_conn_add(struct hci_conn *hcon, __u8 status)
 {
 	struct hci_dev *hdev = hcon->hdev;
-	struct sco_conn *conn;
-
-	if ((conn = hcon->sco_data))
-		return conn;
+	struct sco_conn *conn = hcon->sco_data;
 
-	if (status)
+	if (conn || status)
 		return conn;
 
-	if (!(conn = kmalloc(sizeof(struct sco_conn), GFP_ATOMIC)))
+	conn = kzalloc(sizeof(struct sco_conn), GFP_ATOMIC);
+	if (!conn)
 		return NULL;
-	memset(conn, 0, sizeof(struct sco_conn));
 
 	spin_lock_init(&conn->lock);
 
@@ -134,6 +131,7 @@
 		conn->mtu = 60;
 
 	BT_DBG("hcon %p conn %p", hcon, conn);
+
 	return conn;
 }
 
diff -urN linux-2.6.18-rc1/net/bridge/br_forward.c linux-2.6.18-rc2/net/bridge/br_forward.c
--- linux-2.6.18-rc1/net/bridge/br_forward.c	2006-07-15 22:34:43.881139009 +0000
+++ linux-2.6.18-rc2/net/bridge/br_forward.c	2006-07-15 22:34:49.205716982 +0000
@@ -35,7 +35,7 @@
 int br_dev_queue_push_xmit(struct sk_buff *skb)
 {
 	/* drop mtu oversized packets except gso */
-	if (packet_length(skb) > skb->dev->mtu && !skb_shinfo(skb)->gso_size)
+	if (packet_length(skb) > skb->dev->mtu && !skb_is_gso(skb))
 		kfree_skb(skb);
 	else {
 #ifdef CONFIG_BRIDGE_NETFILTER
diff -urN linux-2.6.18-rc1/net/bridge/br_netfilter.c linux-2.6.18-rc2/net/bridge/br_netfilter.c
--- linux-2.6.18-rc1/net/bridge/br_netfilter.c	2006-07-15 22:34:43.881139009 +0000
+++ linux-2.6.18-rc2/net/bridge/br_netfilter.c	2006-07-15 22:34:49.205716982 +0000
@@ -761,7 +761,7 @@
 {
 	if (skb->protocol == htons(ETH_P_IP) &&
 	    skb->len > skb->dev->mtu &&
-	    !skb_shinfo(skb)->gso_size)
+	    !skb_is_gso(skb))
 		return ip_fragment(skb, br_dev_queue_push_xmit);
 	else
 		return br_dev_queue_push_xmit(skb);
diff -urN linux-2.6.18-rc1/net/core/dev.c linux-2.6.18-rc2/net/core/dev.c
--- linux-2.6.18-rc1/net/core/dev.c	2006-07-15 22:34:43.885139443 +0000
+++ linux-2.6.18-rc2/net/core/dev.c	2006-07-15 22:34:49.209717416 +0000
@@ -1162,9 +1162,17 @@
 	unsigned int csum;
 	int ret = 0, offset = skb->h.raw - skb->data;
 
-	if (inward) {
-		skb->ip_summed = CHECKSUM_NONE;
-		goto out;
+	if (inward)
+		goto out_set_summed;
+
+	if (unlikely(skb_shinfo(skb)->gso_size)) {
+		static int warned;
+
+		WARN_ON(!warned);
+		warned = 1;
+
+		/* Let GSO fix up the checksum. */
+		goto out_set_summed;
 	}
 
 	if (skb_cloned(skb)) {
@@ -1181,6 +1189,8 @@
 	BUG_ON(skb->csum + 2 > offset);
 
 	*(u16*)(skb->h.raw + skb->csum) = csum_fold(csum);
+
+out_set_summed:
 	skb->ip_summed = CHECKSUM_NONE;
 out:	
 	return ret;
@@ -1201,17 +1211,35 @@
 	struct sk_buff *segs = ERR_PTR(-EPROTONOSUPPORT);
 	struct packet_type *ptype;
 	int type = skb->protocol;
+	int err;
 
 	BUG_ON(skb_shinfo(skb)->frag_list);
-	BUG_ON(skb->ip_summed != CHECKSUM_HW);
 
 	skb->mac.raw = skb->data;
 	skb->mac_len = skb->nh.raw - skb->data;
 	__skb_pull(skb, skb->mac_len);
 
+	if (unlikely(skb->ip_summed != CHECKSUM_HW)) {
+		static int warned;
+
+		WARN_ON(!warned);
+		warned = 1;
+
+		if (skb_header_cloned(skb) &&
+		    (err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC)))
+			return ERR_PTR(err);
+	}
+
 	rcu_read_lock();
 	list_for_each_entry_rcu(ptype, &ptype_base[ntohs(type) & 15], list) {
 		if (ptype->type == type && !ptype->dev && ptype->gso_segment) {
+			if (unlikely(skb->ip_summed != CHECKSUM_HW)) {
+				err = ptype->gso_send_check(skb);
+				segs = ERR_PTR(err);
+				if (err || skb_gso_ok(skb, features))
+					break;
+				__skb_push(skb, skb->data - skb->nh.raw);
+			}
 			segs = ptype->gso_segment(skb, features);
 			break;
 		}
@@ -1727,7 +1755,7 @@
 	if (dev->qdisc_ingress) {
 		__u32 ttl = (__u32) G_TC_RTTL(skb->tc_verd);
 		if (MAX_RED_LOOP < ttl++) {
-			printk("Redir loop detected Dropping packet (%s->%s)\n",
+			printk(KERN_WARNING "Redir loop detected Dropping packet (%s->%s)\n",
 				skb->input_dev->name, skb->dev->name);
 			return TC_ACT_SHOT;
 		}
@@ -2922,7 +2950,7 @@
 	/* Fix illegal SG+CSUM combinations. */
 	if ((dev->features & NETIF_F_SG) &&
 	    !(dev->features & NETIF_F_ALL_CSUM)) {
-		printk("%s: Dropping NETIF_F_SG since no checksum feature.\n",
+		printk(KERN_NOTICE "%s: Dropping NETIF_F_SG since no checksum feature.\n",
 		       dev->name);
 		dev->features &= ~NETIF_F_SG;
 	}
@@ -2930,7 +2958,7 @@
 	/* TSO requires that SG is present as well. */
 	if ((dev->features & NETIF_F_TSO) &&
 	    !(dev->features & NETIF_F_SG)) {
-		printk("%s: Dropping NETIF_F_TSO since no SG feature.\n",
+		printk(KERN_NOTICE "%s: Dropping NETIF_F_TSO since no SG feature.\n",
 		       dev->name);
 		dev->features &= ~NETIF_F_TSO;
 	}
diff -urN linux-2.6.18-rc1/net/core/skbuff.c linux-2.6.18-rc2/net/core/skbuff.c
--- linux-2.6.18-rc1/net/core/skbuff.c	2006-07-15 22:34:43.889139877 +0000
+++ linux-2.6.18-rc2/net/core/skbuff.c	2006-07-15 22:34:49.213717850 +0000
@@ -257,11 +257,11 @@
 }
 
 
-static void skb_drop_fraglist(struct sk_buff *skb)
+static void skb_drop_list(struct sk_buff **listp)
 {
-	struct sk_buff *list = skb_shinfo(skb)->frag_list;
+	struct sk_buff *list = *listp;
 
-	skb_shinfo(skb)->frag_list = NULL;
+	*listp = NULL;
 
 	do {
 		struct sk_buff *this = list;
@@ -270,6 +270,11 @@
 	} while (list);
 }
 
+static inline void skb_drop_fraglist(struct sk_buff *skb)
+{
+	skb_drop_list(&skb_shinfo(skb)->frag_list);
+}
+
 static void skb_clone_fraglist(struct sk_buff *skb)
 {
 	struct sk_buff *list;
@@ -830,41 +835,75 @@
 
 int ___pskb_trim(struct sk_buff *skb, unsigned int len)
 {
+	struct sk_buff **fragp;
+	struct sk_buff *frag;
 	int offset = skb_headlen(skb);
 	int nfrags = skb_shinfo(skb)->nr_frags;
 	int i;
+	int err;
+
+	if (skb_cloned(skb) &&
+	    unlikely((err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC))))
+		return err;
 
 	for (i = 0; i < nfrags; i++) {
 		int end = offset + skb_shinfo(skb)->frags[i].size;
-		if (end > len) {
-			if (skb_cloned(skb)) {
-				if (pskb_expand_head(skb, 0, 0, GFP_ATOMIC))
-					return -ENOMEM;
-			}
-			if (len <= offset) {
-				put_page(skb_shinfo(skb)->frags[i].page);
-				skb_shinfo(skb)->nr_frags--;
-			} else {
-				skb_shinfo(skb)->frags[i].size = len - offset;
-			}
+
+		if (end < len) {
+			offset = end;
+			continue;
 		}
-		offset = end;
+
+		if (len > offset)
+			skb_shinfo(skb)->frags[i++].size = len - offset;
+
+		skb_shinfo(skb)->nr_frags = i;
+
+		for (; i < nfrags; i++)
+			put_page(skb_shinfo(skb)->frags[i].page);
+
+		if (skb_shinfo(skb)->frag_list)
+			skb_drop_fraglist(skb);
+		break;
 	}
 
-	if (offset < len) {
+	for (fragp = &skb_shinfo(skb)->frag_list; (frag = *fragp);
+	     fragp = &frag->next) {
+		int end = offset + frag->len;
+
+		if (skb_shared(frag)) {
+			struct sk_buff *nfrag;
+
+			nfrag = skb_clone(frag, GFP_ATOMIC);
+			if (unlikely(!nfrag))
+				return -ENOMEM;
+
+			nfrag->next = frag->next;
+			frag = nfrag;
+			*fragp = frag;
+		}
+
+		if (end < len) {
+			offset = end;
+			continue;
+		}
+
+		if (end > len &&
+		    unlikely((err = pskb_trim(frag, len - offset))))
+			return err;
+
+		if (frag->next)
+			skb_drop_list(&frag->next);
+		break;
+	}
+
+	if (len > skb_headlen(skb)) {
 		skb->data_len -= skb->len - len;
 		skb->len       = len;
 	} else {
-		if (len <= skb_headlen(skb)) {
-			skb->len      = len;
-			skb->data_len = 0;
-			skb->tail     = skb->data + len;
-			if (skb_shinfo(skb)->frag_list && !skb_cloned(skb))
-				skb_drop_fraglist(skb);
-		} else {
-			skb->data_len -= skb->len - len;
-			skb->len       = len;
-		}
+		skb->len       = len;
+		skb->data_len  = 0;
+		skb->tail      = skb->data + len;
 	}
 
 	return 0;
diff -urN linux-2.6.18-rc1/net/core/stream.c linux-2.6.18-rc2/net/core/stream.c
--- linux-2.6.18-rc1/net/core/stream.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/net/core/stream.c	2006-07-15 22:34:49.213717850 +0000
@@ -196,15 +196,13 @@
 
 void __sk_stream_mem_reclaim(struct sock *sk)
 {
-	if (sk->sk_forward_alloc >= SK_STREAM_MEM_QUANTUM) {
-		atomic_sub(sk->sk_forward_alloc / SK_STREAM_MEM_QUANTUM,
-			   sk->sk_prot->memory_allocated);
-		sk->sk_forward_alloc &= SK_STREAM_MEM_QUANTUM - 1;
-		if (*sk->sk_prot->memory_pressure &&
-		    (atomic_read(sk->sk_prot->memory_allocated) <
-		     sk->sk_prot->sysctl_mem[0]))
-			*sk->sk_prot->memory_pressure = 0;
-	}
+	atomic_sub(sk->sk_forward_alloc / SK_STREAM_MEM_QUANTUM,
+		   sk->sk_prot->memory_allocated);
+	sk->sk_forward_alloc &= SK_STREAM_MEM_QUANTUM - 1;
+	if (*sk->sk_prot->memory_pressure &&
+	    (atomic_read(sk->sk_prot->memory_allocated) <
+	     sk->sk_prot->sysctl_mem[0]))
+		*sk->sk_prot->memory_pressure = 0;
 }
 
 EXPORT_SYMBOL(__sk_stream_mem_reclaim);
diff -urN linux-2.6.18-rc1/net/dccp/proto.c linux-2.6.18-rc2/net/dccp/proto.c
--- linux-2.6.18-rc1/net/dccp/proto.c	2006-07-15 22:34:43.893140312 +0000
+++ linux-2.6.18-rc2/net/dccp/proto.c	2006-07-15 22:34:49.221718719 +0000
@@ -484,7 +484,7 @@
 			err = -EINVAL;
 		else
 			err = dccp_setsockopt_change(sk, DCCPO_CHANGE_L,
-					             (struct dccp_so_feat *)
+					             (struct dccp_so_feat __user *)
 						     optval);
 		break;
 
@@ -493,7 +493,7 @@
 			err = -EINVAL;
 		else
 			err = dccp_setsockopt_change(sk, DCCPO_CHANGE_R,
-						     (struct dccp_so_feat *)
+						     (struct dccp_so_feat __user *)
 						     optval);
 		break;
 
diff -urN linux-2.6.18-rc1/net/decnet/dn_rules.c linux-2.6.18-rc2/net/decnet/dn_rules.c
--- linux-2.6.18-rc1/net/decnet/dn_rules.c	2006-07-15 22:34:43.897140746 +0000
+++ linux-2.6.18-rc2/net/decnet/dn_rules.c	2006-07-15 22:34:49.221718719 +0000
@@ -399,9 +399,10 @@
 	rcu_read_lock();
 	hlist_for_each_entry(r, node, &dn_fib_rules, r_hlist) {
 		if (idx < s_idx)
-			continue;
+			goto next;
 		if (dn_fib_fill_rule(skb, r, cb, NLM_F_MULTI) < 0)
 			break;
+next:
 		idx++;
 	}
 	rcu_read_unlock();
diff -urN linux-2.6.18-rc1/net/ipv4/Kconfig linux-2.6.18-rc2/net/ipv4/Kconfig
--- linux-2.6.18-rc1/net/ipv4/Kconfig	2006-07-15 22:34:43.905141614 +0000
+++ linux-2.6.18-rc2/net/ipv4/Kconfig	2006-07-15 22:34:49.229719587 +0000
@@ -572,16 +572,6 @@
 	loss packets.
 	See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf
 
-config TCP_CONG_COMPOUND
-	tristate "TCP Compound"
-	depends on EXPERIMENTAL
-	default n
-	---help---
-	TCP Compound is a sender-side only change to TCP that uses
-	a mixed Reno/Vegas approach to calculate the cwnd.
-	For further details look here:
-	  ftp://ftp.research.microsoft.com/pub/tr/TR-2005-86.pdf
-
 endmenu
 
 config TCP_CONG_BIC
diff -urN linux-2.6.18-rc1/net/ipv4/Makefile linux-2.6.18-rc2/net/ipv4/Makefile
--- linux-2.6.18-rc1/net/ipv4/Makefile	2006-07-15 22:34:43.905141614 +0000
+++ linux-2.6.18-rc2/net/ipv4/Makefile	2006-07-15 22:34:49.229719587 +0000
@@ -47,7 +47,6 @@
 obj-$(CONFIG_TCP_CONG_VENO) += tcp_veno.o
 obj-$(CONFIG_TCP_CONG_SCALABLE) += tcp_scalable.o
 obj-$(CONFIG_TCP_CONG_LP) += tcp_lp.o
-obj-$(CONFIG_TCP_CONG_COMPOUND) += tcp_compound.o
 
 obj-$(CONFIG_XFRM) += xfrm4_policy.o xfrm4_state.o xfrm4_input.o \
 		      xfrm4_output.o
diff -urN linux-2.6.18-rc1/net/ipv4/af_inet.c linux-2.6.18-rc2/net/ipv4/af_inet.c
--- linux-2.6.18-rc1/net/ipv4/af_inet.c	2006-07-15 22:34:43.905141614 +0000
+++ linux-2.6.18-rc2/net/ipv4/af_inet.c	2006-07-15 22:34:49.229719587 +0000
@@ -1097,6 +1097,40 @@
 
 EXPORT_SYMBOL(inet_sk_rebuild_header);
 
+static int inet_gso_send_check(struct sk_buff *skb)
+{
+	struct iphdr *iph;
+	struct net_protocol *ops;
+	int proto;
+	int ihl;
+	int err = -EINVAL;
+
+	if (unlikely(!pskb_may_pull(skb, sizeof(*iph))))
+		goto out;
+
+	iph = skb->nh.iph;
+	ihl = iph->ihl * 4;
+	if (ihl < sizeof(*iph))
+		goto out;
+
+	if (unlikely(!pskb_may_pull(skb, ihl)))
+		goto out;
+
+	skb->h.raw = __skb_pull(skb, ihl);
+	iph = skb->nh.iph;
+	proto = iph->protocol & (MAX_INET_PROTOS - 1);
+	err = -EPROTONOSUPPORT;
+
+	rcu_read_lock();
+	ops = rcu_dereference(inet_protos[proto]);
+	if (likely(ops && ops->gso_send_check))
+		err = ops->gso_send_check(skb);
+	rcu_read_unlock();
+
+out:
+	return err;
+}
+
 static struct sk_buff *inet_gso_segment(struct sk_buff *skb, int features)
 {
 	struct sk_buff *segs = ERR_PTR(-EINVAL);
@@ -1162,6 +1196,7 @@
 static struct net_protocol tcp_protocol = {
 	.handler =	tcp_v4_rcv,
 	.err_handler =	tcp_v4_err,
+	.gso_send_check = tcp_v4_gso_send_check,
 	.gso_segment =	tcp_tso_segment,
 	.no_policy =	1,
 };
@@ -1208,6 +1243,7 @@
 static struct packet_type ip_packet_type = {
 	.type = __constant_htons(ETH_P_IP),
 	.func = ip_rcv,
+	.gso_send_check = inet_gso_send_check,
 	.gso_segment = inet_gso_segment,
 };
 
diff -urN linux-2.6.18-rc1/net/ipv4/fib_rules.c linux-2.6.18-rc2/net/ipv4/fib_rules.c
--- linux-2.6.18-rc1/net/ipv4/fib_rules.c	2006-07-15 22:34:43.905141614 +0000
+++ linux-2.6.18-rc2/net/ipv4/fib_rules.c	2006-07-15 22:34:49.233720022 +0000
@@ -457,13 +457,13 @@
 
 	rcu_read_lock();
 	hlist_for_each_entry(r, node, &fib_rules, hlist) {
-
 		if (idx < s_idx)
-			continue;
+			goto next;
 		if (inet_fill_rule(skb, r, NETLINK_CB(cb->skb).pid,
 				   cb->nlh->nlmsg_seq,
 				   RTM_NEWRULE, NLM_F_MULTI) < 0)
 			break;
+next:
 		idx++;
 	}
 	rcu_read_unlock();
diff -urN linux-2.6.18-rc1/net/ipv4/fib_trie.c linux-2.6.18-rc2/net/ipv4/fib_trie.c
--- linux-2.6.18-rc1/net/ipv4/fib_trie.c	2006-07-15 22:34:43.909142049 +0000
+++ linux-2.6.18-rc2/net/ipv4/fib_trie.c	2006-07-15 22:34:49.233720022 +0000
@@ -1252,8 +1252,8 @@
 	 */
 
 	if (!fa_head) {
-		fa_head = fib_insert_node(t, &err, key, plen);
 		err = 0;
+		fa_head = fib_insert_node(t, &err, key, plen);
 		if (err)
 			goto out_free_new_fa;
 	}
diff -urN linux-2.6.18-rc1/net/ipv4/inetpeer.c linux-2.6.18-rc2/net/ipv4/inetpeer.c
--- linux-2.6.18-rc1/net/ipv4/inetpeer.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/net/ipv4/inetpeer.c	2006-07-15 22:34:49.237720456 +0000
@@ -86,7 +86,7 @@
 static DEFINE_RWLOCK(peer_pool_lock);
 #define PEER_MAXDEPTH 40 /* sufficient for about 2^27 nodes */
 
-static volatile int peer_total;
+static int peer_total;
 /* Exported for sysctl_net_ipv4.  */
 int inet_peer_threshold = 65536 + 128;	/* start to throw entries more
 					 * aggressively at this stage */
diff -urN linux-2.6.18-rc1/net/ipv4/ip_input.c linux-2.6.18-rc2/net/ipv4/ip_input.c
--- linux-2.6.18-rc1/net/ipv4/ip_input.c	2006-07-15 22:34:43.913142483 +0000
+++ linux-2.6.18-rc2/net/ipv4/ip_input.c	2006-07-15 22:34:49.237720456 +0000
@@ -428,6 +428,9 @@
 		goto drop;
 	}
 
+	/* Remove any debris in the socket control block */
+	memset(&(IPCB(skb)->opt), 0, sizeof(struct ip_options));
+
 	return NF_HOOK(PF_INET, NF_IP_PRE_ROUTING, skb, dev, NULL,
 		       ip_rcv_finish);
 
diff -urN linux-2.6.18-rc1/net/ipv4/ip_output.c linux-2.6.18-rc2/net/ipv4/ip_output.c
--- linux-2.6.18-rc1/net/ipv4/ip_output.c	2006-07-15 22:34:43.913142483 +0000
+++ linux-2.6.18-rc2/net/ipv4/ip_output.c	2006-07-15 22:34:49.237720456 +0000
@@ -209,7 +209,7 @@
 		return dst_output(skb);
 	}
 #endif
-	if (skb->len > dst_mtu(skb->dst) && !skb_shinfo(skb)->gso_size)
+	if (skb->len > dst_mtu(skb->dst) && !skb_is_gso(skb))
 		return ip_fragment(skb, ip_finish_output2);
 	else
 		return ip_finish_output2(skb);
@@ -1095,7 +1095,7 @@
 	while (size > 0) {
 		int i;
 
-		if (skb_shinfo(skb)->gso_size)
+		if (skb_is_gso(skb))
 			len = size;
 		else {
 
diff -urN linux-2.6.18-rc1/net/ipv4/ipcomp.c linux-2.6.18-rc2/net/ipv4/ipcomp.c
--- linux-2.6.18-rc1/net/ipv4/ipcomp.c	2006-07-15 22:34:43.913142483 +0000
+++ linux-2.6.18-rc2/net/ipv4/ipcomp.c	2006-07-15 22:34:49.237720456 +0000
@@ -70,7 +70,8 @@
 	if (err)
 		goto out;
 		
-	skb_put(skb, dlen - plen);
+	skb->truesize += dlen - plen;
+	__skb_put(skb, dlen - plen);
 	memcpy(skb->data, scratch, dlen);
 out:	
 	put_cpu();
diff -urN linux-2.6.18-rc1/net/ipv4/tcp_compound.c linux-2.6.18-rc2/net/ipv4/tcp_compound.c
--- linux-2.6.18-rc1/net/ipv4/tcp_compound.c	2006-07-15 22:34:43.929144220 +0000
+++ linux-2.6.18-rc2/net/ipv4/tcp_compound.c	1970-01-01 00:00:00.000000000 +0000
@@ -1,448 +0,0 @@
-/*
- * TCP Vegas congestion control
- *
- * This is based on the congestion detection/avoidance scheme described in
- *    Lawrence S. Brakmo and Larry L. Peterson.
- *    "TCP Vegas: End to end congestion avoidance on a global internet."
- *    IEEE Journal on Selected Areas in Communication, 13(8):1465--1480,
- *    October 1995. Available from:
- *	ftp://ftp.cs.arizona.edu/xkernel/Papers/jsac.ps
- *
- * See http://www.cs.arizona.edu/xkernel/ for their implementation.
- * The main aspects that distinguish this implementation from the
- * Arizona Vegas implementation are:
- *   o We do not change the loss detection or recovery mechanisms of
- *     Linux in any way. Linux already recovers from losses quite well,
- *     using fine-grained timers, NewReno, and FACK.
- *   o To avoid the performance penalty imposed by increasing cwnd
- *     only every-other RTT during slow start, we increase during
- *     every RTT during slow start, just like Reno.
- *   o Largely to allow continuous cwnd growth during slow start,
- *     we use the rate at which ACKs come back as the "actual"
- *     rate, rather than the rate at which data is sent.
- *   o To speed convergence to the right rate, we set the cwnd
- *     to achieve the right ("actual") rate when we exit slow start.
- *   o To filter out the noise caused by delayed ACKs, we use the
- *     minimum RTT sample observed during the last RTT to calculate
- *     the actual rate.
- *   o When the sender re-starts from idle, it waits until it has
- *     received ACKs for an entire flight of new data before making
- *     a cwnd adjustment decision. The original Vegas implementation
- *     assumed senders never went idle.
- *
- *
- *   TCP Compound based on TCP Vegas
- *
- *   further details can be found here:
- *      ftp://ftp.research.microsoft.com/pub/tr/TR-2005-86.pdf
- */
-
-#include <linux/config.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/skbuff.h>
-#include <linux/inet_diag.h>
-
-#include <net/tcp.h>
-
-/* Default values of the Vegas variables, in fixed-point representation
- * with V_PARAM_SHIFT bits to the right of the binary point.
- */
-#define V_PARAM_SHIFT 1
-
-#define TCP_COMPOUND_ALPHA          3U
-#define TCP_COMPOUND_BETA           1U
-#define TCP_COMPOUND_GAMMA         30
-#define TCP_COMPOUND_ZETA           1
-
-/* TCP compound variables */
-struct compound {
-	u32 beg_snd_nxt;	/* right edge during last RTT */
-	u32 beg_snd_una;	/* left edge  during last RTT */
-	u32 beg_snd_cwnd;	/* saves the size of the cwnd */
-	u8 doing_vegas_now;	/* if true, do vegas for this RTT */
-	u16 cntRTT;		/* # of RTTs measured within last RTT */
-	u32 minRTT;		/* min of RTTs measured within last RTT (in usec) */
-	u32 baseRTT;		/* the min of all Vegas RTT measurements seen (in usec) */
-
-	u32 cwnd;
-	u32 dwnd;
-};
-
-/* There are several situations when we must "re-start" Vegas:
- *
- *  o when a connection is established
- *  o after an RTO
- *  o after fast recovery
- *  o when we send a packet and there is no outstanding
- *    unacknowledged data (restarting an idle connection)
- *
- * In these circumstances we cannot do a Vegas calculation at the
- * end of the first RTT, because any calculation we do is using
- * stale info -- both the saved cwnd and congestion feedback are
- * stale.
- *
- * Instead we must wait until the completion of an RTT during
- * which we actually receive ACKs.
- */
-static inline void vegas_enable(struct sock *sk)
-{
-	const struct tcp_sock *tp = tcp_sk(sk);
-	struct compound *vegas = inet_csk_ca(sk);
-
-	/* Begin taking Vegas samples next time we send something. */
-	vegas->doing_vegas_now = 1;
-
-	/* Set the beginning of the next send window. */
-	vegas->beg_snd_nxt = tp->snd_nxt;
-
-	vegas->cntRTT = 0;
-	vegas->minRTT = 0x7fffffff;
-}
-
-/* Stop taking Vegas samples for now. */
-static inline void vegas_disable(struct sock *sk)
-{
-	struct compound *vegas = inet_csk_ca(sk);
-
-	vegas->doing_vegas_now = 0;
-}
-
-static void tcp_compound_init(struct sock *sk)
-{
-	struct compound *vegas = inet_csk_ca(sk);
-	const struct tcp_sock *tp = tcp_sk(sk);
-
-	vegas->baseRTT = 0x7fffffff;
-	vegas_enable(sk);
-
-	vegas->dwnd = 0;
-	vegas->cwnd = tp->snd_cwnd;
-}
-
-/* Do RTT sampling needed for Vegas.
- * Basically we:
- *   o min-filter RTT samples from within an RTT to get the current
- *     propagation delay + queuing delay (we are min-filtering to try to
- *     avoid the effects of delayed ACKs)
- *   o min-filter RTT samples from a much longer window (forever for now)
- *     to find the propagation delay (baseRTT)
- */
-static void tcp_compound_rtt_calc(struct sock *sk, u32 usrtt)
-{
-	struct compound *vegas = inet_csk_ca(sk);
-	u32 vrtt = usrtt + 1;	/* Never allow zero rtt or baseRTT */
-
-	/* Filter to find propagation delay: */
-	if (vrtt < vegas->baseRTT)
-		vegas->baseRTT = vrtt;
-
-	/* Find the min RTT during the last RTT to find
-	 * the current prop. delay + queuing delay:
-	 */
-
-	vegas->minRTT = min(vegas->minRTT, vrtt);
-	vegas->cntRTT++;
-}
-
-static void tcp_compound_state(struct sock *sk, u8 ca_state)
-{
-
-	if (ca_state == TCP_CA_Open)
-		vegas_enable(sk);
-	else
-		vegas_disable(sk);
-}
-
-
-/* 64bit divisor, dividend and result. dynamic precision */
-static inline u64 div64_64(u64 dividend, u64 divisor)
-{
-	u32 d = divisor;
-
-	if (divisor > 0xffffffffULL) {
-		unsigned int shift = fls(divisor >> 32);
-
-		d = divisor >> shift;
-		dividend >>= shift;
-	}
-
-	/* avoid 64 bit division if possible */
-	if (dividend >> 32)
-		do_div(dividend, d);
-	else
-		dividend = (u32) dividend / d;
-
-	return dividend;
-}
-
-/* calculate the quartic root of "a" using Newton-Raphson */
-static u32 qroot(u64 a)
-{
-	u32 x, x1;
-
-	/* Initial estimate is based on:
-	 * qrt(x) = exp(log(x) / 4)
-	 */
-	x = 1u << (fls64(a) >> 2);
-
-	/*
-	 * Iteration based on:
-	 *                         3
-	 * x    = ( 3 * x  +  a / x  ) / 4
-	 *  k+1          k         k
-	 */
-	do {
-		u64 x3 = x;
-
-		x1 = x;
-		x3 *= x;
-		x3 *= x;
-
-		x = (3 * x + (u32) div64_64(a, x3)) / 4;
-	} while (abs(x1 - x) > 1);
-
-	return x;
-}
-
-
-/*
- * If the connection is idle and we are restarting,
- * then we don't want to do any Vegas calculations
- * until we get fresh RTT samples.  So when we
- * restart, we reset our Vegas state to a clean
- * slate. After we get acks for this flight of
- * packets, _then_ we can make Vegas calculations
- * again.
- */
-static void tcp_compound_cwnd_event(struct sock *sk, enum tcp_ca_event event)
-{
-	if (event == CA_EVENT_CWND_RESTART || event == CA_EVENT_TX_START)
-		tcp_compound_init(sk);
-}
-
-static void tcp_compound_cong_avoid(struct sock *sk, u32 ack,
-				    u32 seq_rtt, u32 in_flight, int flag)
-{
-	struct tcp_sock *tp = tcp_sk(sk);
-	struct compound *vegas = inet_csk_ca(sk);
-	u8 inc = 0;
-
-	if (vegas->cwnd + vegas->dwnd > tp->snd_cwnd) {
-		if (vegas->cwnd > tp->snd_cwnd || vegas->dwnd > tp->snd_cwnd) {
-			vegas->cwnd = tp->snd_cwnd;
-			vegas->dwnd = 0;
-		} else
-			vegas->cwnd = tp->snd_cwnd - vegas->dwnd;
-
-	}
-
-	if (!tcp_is_cwnd_limited(sk, in_flight))
-		return;
-
-	if (vegas->cwnd <= tp->snd_ssthresh)
-		inc = 1;
-	else if (tp->snd_cwnd_cnt < tp->snd_cwnd)
-		tp->snd_cwnd_cnt++;
-
-	if (tp->snd_cwnd_cnt >= tp->snd_cwnd) {
-		inc = 1;
-		tp->snd_cwnd_cnt = 0;
-	}
-
-	if (inc && tp->snd_cwnd < tp->snd_cwnd_clamp)
-		vegas->cwnd++;
-
-	/* The key players are v_beg_snd_una and v_beg_snd_nxt.
-	 *
-	 * These are so named because they represent the approximate values
-	 * of snd_una and snd_nxt at the beginning of the current RTT. More
-	 * precisely, they represent the amount of data sent during the RTT.
-	 * At the end of the RTT, when we receive an ACK for v_beg_snd_nxt,
-	 * we will calculate that (v_beg_snd_nxt - v_beg_snd_una) outstanding
-	 * bytes of data have been ACKed during the course of the RTT, giving
-	 * an "actual" rate of:
-	 *
-	 *     (v_beg_snd_nxt - v_beg_snd_una) / (rtt duration)
-	 *
-	 * Unfortunately, v_beg_snd_una is not exactly equal to snd_una,
-	 * because delayed ACKs can cover more than one segment, so they
-	 * don't line up nicely with the boundaries of RTTs.
-	 *
-	 * Another unfortunate fact of life is that delayed ACKs delay the
-	 * advance of the left edge of our send window, so that the number
-	 * of bytes we send in an RTT is often less than our cwnd will allow.
-	 * So we keep track of our cwnd separately, in v_beg_snd_cwnd.
-	 */
-
-	if (after(ack, vegas->beg_snd_nxt)) {
-		/* Do the Vegas once-per-RTT cwnd adjustment. */
-		u32 old_wnd, old_snd_cwnd;
-
-		/* Here old_wnd is essentially the window of data that was
-		 * sent during the previous RTT, and has all
-		 * been acknowledged in the course of the RTT that ended
-		 * with the ACK we just received. Likewise, old_snd_cwnd
-		 * is the cwnd during the previous RTT.
-		 */
-		if (!tp->mss_cache)
-			return;
-
-		old_wnd = (vegas->beg_snd_nxt - vegas->beg_snd_una) /
-		    tp->mss_cache;
-		old_snd_cwnd = vegas->beg_snd_cwnd;
-
-		/* Save the extent of the current window so we can use this
-		 * at the end of the next RTT.
-		 */
-		vegas->beg_snd_una = vegas->beg_snd_nxt;
-		vegas->beg_snd_nxt = tp->snd_nxt;
-		vegas->beg_snd_cwnd = tp->snd_cwnd;
-
-		/* We do the Vegas calculations only if we got enough RTT
-		 * samples that we can be reasonably sure that we got
-		 * at least one RTT sample that wasn't from a delayed ACK.
-		 * If we only had 2 samples total,
-		 * then that means we're getting only 1 ACK per RTT, which
-		 * means they're almost certainly delayed ACKs.
-		 * If  we have 3 samples, we should be OK.
-		 */
-
-		if (vegas->cntRTT > 2) {
-			u32 rtt, target_cwnd, diff;
-			u32 brtt, dwnd;
-
-			/* We have enough RTT samples, so, using the Vegas
-			 * algorithm, we determine if we should increase or
-			 * decrease cwnd, and by how much.
-			 */
-
-			/* Pluck out the RTT we are using for the Vegas
-			 * calculations. This is the min RTT seen during the
-			 * last RTT. Taking the min filters out the effects
-			 * of delayed ACKs, at the cost of noticing congestion
-			 * a bit later.
-			 */
-			rtt = vegas->minRTT;
-
-			/* Calculate the cwnd we should have, if we weren't
-			 * going too fast.
-			 *
-			 * This is:
-			 *     (actual rate in segments) * baseRTT
-			 * We keep it as a fixed point number with
-			 * V_PARAM_SHIFT bits to the right of the binary point.
-			 */
-			if (!rtt)
-				return;
-
-			brtt = vegas->baseRTT;
-			target_cwnd = ((old_wnd * brtt)
-				       << V_PARAM_SHIFT) / rtt;
-
-			/* Calculate the difference between the window we had,
-			 * and the window we would like to have. This quantity
-			 * is the "Diff" from the Arizona Vegas papers.
-			 *
-			 * Again, this is a fixed point number with
-			 * V_PARAM_SHIFT bits to the right of the binary
-			 * point.
-			 */
-
-			diff = (old_wnd << V_PARAM_SHIFT) - target_cwnd;
-
-			dwnd = vegas->dwnd;
-
-			if (diff < (TCP_COMPOUND_GAMMA << V_PARAM_SHIFT)) {
-				u64 v;
-				u32 x;
-
-				/*
-				 * The TCP Compound paper describes the choice
-				 * of "k" determines the agressiveness,
-				 * ie. slope of the response function.
-				 *
-				 * For same value as HSTCP would be 0.8
-				 * but for computaional reasons, both the
-				 * original authors and this implementation
-				 * use 0.75.
-				 */
-				v = old_wnd;
-				x = qroot(v * v * v) >> TCP_COMPOUND_ALPHA;
-				if (x > 1)
-					dwnd = x - 1;
-				else
-					dwnd = 0;
-
-				dwnd += vegas->dwnd;
-
-			} else if ((dwnd << V_PARAM_SHIFT) <
-				   (diff * TCP_COMPOUND_BETA))
-				dwnd = 0;
-			else
-				dwnd =
-				    ((dwnd << V_PARAM_SHIFT) -
-				     (diff *
-				      TCP_COMPOUND_BETA)) >> V_PARAM_SHIFT;
-
-			vegas->dwnd = dwnd;
-
-		}
-
-		/* Wipe the slate clean for the next RTT. */
-		vegas->cntRTT = 0;
-		vegas->minRTT = 0x7fffffff;
-	}
-
-	tp->snd_cwnd = vegas->cwnd + vegas->dwnd;
-}
-
-/* Extract info for Tcp socket info provided via netlink. */
-static void tcp_compound_get_info(struct sock *sk, u32 ext, struct sk_buff *skb)
-{
-	const struct compound *ca = inet_csk_ca(sk);
-	if (ext & (1 << (INET_DIAG_VEGASINFO - 1))) {
-		struct tcpvegas_info *info;
-
-		info = RTA_DATA(__RTA_PUT(skb, INET_DIAG_VEGASINFO,
-					  sizeof(*info)));
-
-		info->tcpv_enabled = ca->doing_vegas_now;
-		info->tcpv_rttcnt = ca->cntRTT;
-		info->tcpv_rtt = ca->baseRTT;
-		info->tcpv_minrtt = ca->minRTT;
-	rtattr_failure:;
-	}
-}
-
-static struct tcp_congestion_ops tcp_compound = {
-	.init		= tcp_compound_init,
-	.ssthresh	= tcp_reno_ssthresh,
-	.cong_avoid	= tcp_compound_cong_avoid,
-	.rtt_sample	= tcp_compound_rtt_calc,
-	.set_state	= tcp_compound_state,
-	.cwnd_event	= tcp_compound_cwnd_event,
-	.get_info	= tcp_compound_get_info,
-
-	.owner		= THIS_MODULE,
-	.name		= "compound",
-};
-
-static int __init tcp_compound_register(void)
-{
-	BUG_ON(sizeof(struct compound) > ICSK_CA_PRIV_SIZE);
-	tcp_register_congestion_control(&tcp_compound);
-	return 0;
-}
-
-static void __exit tcp_compound_unregister(void)
-{
-	tcp_unregister_congestion_control(&tcp_compound);
-}
-
-module_init(tcp_compound_register);
-module_exit(tcp_compound_unregister);
-
-MODULE_AUTHOR("Angelo P. Castellani, Stephen Hemminger");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("TCP Compound");
diff -urN linux-2.6.18-rc1/net/ipv4/tcp_highspeed.c linux-2.6.18-rc2/net/ipv4/tcp_highspeed.c
--- linux-2.6.18-rc1/net/ipv4/tcp_highspeed.c	2006-07-15 22:34:43.933144654 +0000
+++ linux-2.6.18-rc2/net/ipv4/tcp_highspeed.c	2006-07-15 22:34:49.257722627 +0000
@@ -139,14 +139,19 @@
 				tp->snd_cwnd++;
 		}
 	} else {
-		/* Update AIMD parameters */
+		/* Update AIMD parameters.
+		 *
+		 * We want to guarantee that:
+		 *     hstcp_aimd_vals[ca->ai-1].cwnd <
+		 *     snd_cwnd <=
+		 *     hstcp_aimd_vals[ca->ai].cwnd
+		 */
 		if (tp->snd_cwnd > hstcp_aimd_vals[ca->ai].cwnd) {
 			while (tp->snd_cwnd > hstcp_aimd_vals[ca->ai].cwnd &&
 			       ca->ai < HSTCP_AIMD_MAX - 1)
 				ca->ai++;
-		} else if (tp->snd_cwnd < hstcp_aimd_vals[ca->ai].cwnd) {
-			while (tp->snd_cwnd > hstcp_aimd_vals[ca->ai].cwnd &&
-			       ca->ai > 0)
+		} else if (ca->ai && tp->snd_cwnd <= hstcp_aimd_vals[ca->ai-1].cwnd) {
+			while (ca->ai && tp->snd_cwnd <= hstcp_aimd_vals[ca->ai-1].cwnd)
 				ca->ai--;
 		}
 
diff -urN linux-2.6.18-rc1/net/ipv4/tcp_ipv4.c linux-2.6.18-rc2/net/ipv4/tcp_ipv4.c
--- linux-2.6.18-rc1/net/ipv4/tcp_ipv4.c	2006-07-15 22:34:43.933144654 +0000
+++ linux-2.6.18-rc2/net/ipv4/tcp_ipv4.c	2006-07-15 22:34:49.261723061 +0000
@@ -496,6 +496,24 @@
 	}
 }
 
+int tcp_v4_gso_send_check(struct sk_buff *skb)
+{
+	struct iphdr *iph;
+	struct tcphdr *th;
+
+	if (!pskb_may_pull(skb, sizeof(*th)))
+		return -EINVAL;
+
+	iph = skb->nh.iph;
+	th = skb->h.th;
+
+	th->check = 0;
+	th->check = ~tcp_v4_check(th, skb->len, iph->saddr, iph->daddr, 0);
+	skb->csum = offsetof(struct tcphdr, check);
+	skb->ip_summed = CHECKSUM_HW;
+	return 0;
+}
+
 /*
  *	This routine will send an RST to the other tcp.
  *
diff -urN linux-2.6.18-rc1/net/ipv4/xfrm4_output.c linux-2.6.18-rc2/net/ipv4/xfrm4_output.c
--- linux-2.6.18-rc1/net/ipv4/xfrm4_output.c	2006-07-15 22:34:43.937145088 +0000
+++ linux-2.6.18-rc2/net/ipv4/xfrm4_output.c	2006-07-15 22:34:49.265723496 +0000
@@ -134,7 +134,7 @@
 	}
 #endif
 
-	if (!skb_shinfo(skb)->gso_size)
+	if (!skb_is_gso(skb))
 		return xfrm4_output_finish2(skb);
 
 	skb->protocol = htons(ETH_P_IP);
diff -urN linux-2.6.18-rc1/net/ipv6/addrconf.c linux-2.6.18-rc2/net/ipv6/addrconf.c
--- linux-2.6.18-rc1/net/ipv6/addrconf.c	2006-07-15 22:34:43.941145523 +0000
+++ linux-2.6.18-rc2/net/ipv6/addrconf.c	2006-07-15 22:34:49.265723496 +0000
@@ -508,6 +508,26 @@
 	kfree(ifp);
 }
 
+static void
+ipv6_link_dev_addr(struct inet6_dev *idev, struct inet6_ifaddr *ifp)
+{
+	struct inet6_ifaddr *ifa, **ifap;
+	int ifp_scope = ipv6_addr_src_scope(&ifp->addr);
+
+	/*
+	 * Each device address list is sorted in order of scope -
+	 * global before linklocal.
+	 */
+	for (ifap = &idev->addr_list; (ifa = *ifap) != NULL;
+	     ifap = &ifa->if_next) {
+		if (ifp_scope >= ipv6_addr_src_scope(&ifa->addr))
+			break;
+	}
+
+	ifp->if_next = *ifap;
+	*ifap = ifp;
+}
+
 /* On success it returns ifp with increased reference count */
 
 static struct inet6_ifaddr *
@@ -573,8 +593,7 @@
 
 	write_lock(&idev->lock);
 	/* Add to inet6_dev unicast addr list. */
-	ifa->if_next = idev->addr_list;
-	idev->addr_list = ifa;
+	ipv6_link_dev_addr(idev, ifa);
 
 #ifdef CONFIG_IPV6_PRIVACY
 	if (ifa->flags&IFA_F_TEMPORARY) {
@@ -987,7 +1006,7 @@
 					continue;
 			} else if (score.scope < hiscore.scope) {
 				if (score.scope < daddr_scope)
-					continue;
+					break; /* addresses sorted by scope */
 				else {
 					score.rule = 2;
 					goto record_it;
diff -urN linux-2.6.18-rc1/net/ipv6/ip6_output.c linux-2.6.18-rc2/net/ipv6/ip6_output.c
--- linux-2.6.18-rc1/net/ipv6/ip6_output.c	2006-07-15 22:34:43.945145957 +0000
+++ linux-2.6.18-rc2/net/ipv6/ip6_output.c	2006-07-15 22:34:49.269723930 +0000
@@ -147,7 +147,7 @@
 
 int ip6_output(struct sk_buff *skb)
 {
-	if ((skb->len > dst_mtu(skb->dst) && !skb_shinfo(skb)->gso_size) ||
+	if ((skb->len > dst_mtu(skb->dst) && !skb_is_gso(skb)) ||
 				dst_allfrag(skb->dst))
 		return ip6_fragment(skb, ip6_output2);
 	else
@@ -229,7 +229,7 @@
 	skb->priority = sk->sk_priority;
 
 	mtu = dst_mtu(dst);
-	if ((skb->len <= mtu) || ipfragok || skb_shinfo(skb)->gso_size) {
+	if ((skb->len <= mtu) || ipfragok || skb_is_gso(skb)) {
 		IP6_INC_STATS(IPSTATS_MIB_OUTREQUESTS);
 		return NF_HOOK(PF_INET6, NF_IP6_LOCAL_OUT, skb, NULL, dst->dev,
 				dst_output);
diff -urN linux-2.6.18-rc1/net/ipv6/ipcomp6.c linux-2.6.18-rc2/net/ipv6/ipcomp6.c
--- linux-2.6.18-rc1/net/ipv6/ipcomp6.c	2006-07-15 22:34:43.945145957 +0000
+++ linux-2.6.18-rc2/net/ipv6/ipcomp6.c	2006-07-15 22:34:49.269723930 +0000
@@ -109,7 +109,8 @@
 		goto out_put_cpu;
 	}
 
-	skb_put(skb, dlen - plen);
+	skb->truesize += dlen - plen;
+	__skb_put(skb, dlen - plen);
 	memcpy(skb->data, scratch, dlen);
 	err = ipch->nexthdr;
 
diff -urN linux-2.6.18-rc1/net/ipv6/ipv6_sockglue.c linux-2.6.18-rc2/net/ipv6/ipv6_sockglue.c
--- linux-2.6.18-rc1/net/ipv6/ipv6_sockglue.c	2006-07-15 22:34:43.945145957 +0000
+++ linux-2.6.18-rc2/net/ipv6/ipv6_sockglue.c	2006-07-15 22:34:49.273724364 +0000
@@ -57,29 +57,11 @@
 
 DEFINE_SNMP_STAT(struct ipstats_mib, ipv6_statistics) __read_mostly;
 
-static struct sk_buff *ipv6_gso_segment(struct sk_buff *skb, int features)
+static struct inet6_protocol *ipv6_gso_pull_exthdrs(struct sk_buff *skb,
+						    int proto)
 {
-	struct sk_buff *segs = ERR_PTR(-EINVAL);
-	struct ipv6hdr *ipv6h;
-	struct inet6_protocol *ops;
-	int proto;
+	struct inet6_protocol *ops = NULL;
 
-	if (unlikely(skb_shinfo(skb)->gso_type &
-		     ~(SKB_GSO_UDP |
-		       SKB_GSO_DODGY |
-		       SKB_GSO_TCP_ECN |
-		       SKB_GSO_TCPV6 |
-		       0)))
-		goto out;
-
-	if (unlikely(!pskb_may_pull(skb, sizeof(*ipv6h))))
-		goto out;
-
-	ipv6h = skb->nh.ipv6h;
-	proto = ipv6h->nexthdr;
-	__skb_pull(skb, sizeof(*ipv6h));
-
-	rcu_read_lock();
 	for (;;) {
 		struct ipv6_opt_hdr *opth;
 		int len;
@@ -88,30 +70,80 @@
 			ops = rcu_dereference(inet6_protos[proto]);
 
 			if (unlikely(!ops))
-				goto unlock;
+				break;
 
 			if (!(ops->flags & INET6_PROTO_GSO_EXTHDR))
 				break;
 		}
 
 		if (unlikely(!pskb_may_pull(skb, 8)))
-			goto unlock;
+			break;
 
 		opth = (void *)skb->data;
 		len = opth->hdrlen * 8 + 8;
 
 		if (unlikely(!pskb_may_pull(skb, len)))
-			goto unlock;
+			break;
 
 		proto = opth->nexthdr;
 		__skb_pull(skb, len);
 	}
 
-	skb->h.raw = skb->data;
-	if (likely(ops->gso_segment))
-		segs = ops->gso_segment(skb, features);
+	return ops;
+}
+
+static int ipv6_gso_send_check(struct sk_buff *skb)
+{
+	struct ipv6hdr *ipv6h;
+	struct inet6_protocol *ops;
+	int err = -EINVAL;
+
+	if (unlikely(!pskb_may_pull(skb, sizeof(*ipv6h))))
+		goto out;
 
-unlock:
+	ipv6h = skb->nh.ipv6h;
+	__skb_pull(skb, sizeof(*ipv6h));
+	err = -EPROTONOSUPPORT;
+
+	rcu_read_lock();
+	ops = ipv6_gso_pull_exthdrs(skb, ipv6h->nexthdr);
+	if (likely(ops && ops->gso_send_check)) {
+		skb->h.raw = skb->data;
+		err = ops->gso_send_check(skb);
+	}
+	rcu_read_unlock();
+
+out:
+	return err;
+}
+
+static struct sk_buff *ipv6_gso_segment(struct sk_buff *skb, int features)
+{
+	struct sk_buff *segs = ERR_PTR(-EINVAL);
+	struct ipv6hdr *ipv6h;
+	struct inet6_protocol *ops;
+
+	if (unlikely(skb_shinfo(skb)->gso_type &
+		     ~(SKB_GSO_UDP |
+		       SKB_GSO_DODGY |
+		       SKB_GSO_TCP_ECN |
+		       SKB_GSO_TCPV6 |
+		       0)))
+		goto out;
+
+	if (unlikely(!pskb_may_pull(skb, sizeof(*ipv6h))))
+		goto out;
+
+	ipv6h = skb->nh.ipv6h;
+	__skb_pull(skb, sizeof(*ipv6h));
+	segs = ERR_PTR(-EPROTONOSUPPORT);
+
+	rcu_read_lock();
+	ops = ipv6_gso_pull_exthdrs(skb, ipv6h->nexthdr);
+	if (likely(ops && ops->gso_segment)) {
+		skb->h.raw = skb->data;
+		segs = ops->gso_segment(skb, features);
+	}
 	rcu_read_unlock();
 
 	if (unlikely(IS_ERR(segs)))
@@ -130,6 +162,7 @@
 static struct packet_type ipv6_packet_type = {
 	.type = __constant_htons(ETH_P_IPV6), 
 	.func = ipv6_rcv,
+	.gso_send_check = ipv6_gso_send_check,
 	.gso_segment = ipv6_gso_segment,
 };
 
diff -urN linux-2.6.18-rc1/net/ipv6/tcp_ipv6.c linux-2.6.18-rc2/net/ipv6/tcp_ipv6.c
--- linux-2.6.18-rc1/net/ipv6/tcp_ipv6.c	2006-07-15 22:34:43.949146391 +0000
+++ linux-2.6.18-rc2/net/ipv6/tcp_ipv6.c	2006-07-15 22:34:49.277724798 +0000
@@ -552,6 +552,24 @@
 	}
 }
 
+static int tcp_v6_gso_send_check(struct sk_buff *skb)
+{
+	struct ipv6hdr *ipv6h;
+	struct tcphdr *th;
+
+	if (!pskb_may_pull(skb, sizeof(*th)))
+		return -EINVAL;
+
+	ipv6h = skb->nh.ipv6h;
+	th = skb->h.th;
+
+	th->check = 0;
+	th->check = ~csum_ipv6_magic(&ipv6h->saddr, &ipv6h->daddr, skb->len,
+				     IPPROTO_TCP, 0);
+	skb->csum = offsetof(struct tcphdr, check);
+	skb->ip_summed = CHECKSUM_HW;
+	return 0;
+}
 
 static void tcp_v6_send_reset(struct sk_buff *skb)
 {
@@ -1603,6 +1621,7 @@
 static struct inet6_protocol tcpv6_protocol = {
 	.handler	=	tcp_v6_rcv,
 	.err_handler	=	tcp_v6_err,
+	.gso_send_check	=	tcp_v6_gso_send_check,
 	.gso_segment	=	tcp_tso_segment,
 	.flags		=	INET6_PROTO_NOPOLICY|INET6_PROTO_FINAL,
 };
diff -urN linux-2.6.18-rc1/net/ipv6/xfrm6_output.c linux-2.6.18-rc2/net/ipv6/xfrm6_output.c
--- linux-2.6.18-rc1/net/ipv6/xfrm6_output.c	2006-07-15 22:34:43.949146391 +0000
+++ linux-2.6.18-rc2/net/ipv6/xfrm6_output.c	2006-07-15 22:34:49.277724798 +0000
@@ -122,7 +122,7 @@
 {
 	struct sk_buff *segs;
 
-	if (!skb_shinfo(skb)->gso_size)
+	if (!skb_is_gso(skb))
 		return xfrm6_output_finish2(skb);
 
 	skb->protocol = htons(ETH_P_IP);
diff -urN linux-2.6.18-rc1/net/netrom/af_netrom.c linux-2.6.18-rc2/net/netrom/af_netrom.c
--- linux-2.6.18-rc1/net/netrom/af_netrom.c	2006-07-15 22:34:43.969148562 +0000
+++ linux-2.6.18-rc2/net/netrom/af_netrom.c	2006-07-15 22:34:49.297726970 +0000
@@ -66,6 +66,14 @@
 static const struct proto_ops nr_proto_ops;
 
 /*
+ * NETROM network devices are virtual network devices encapsulating NETROM
+ * frames into AX.25 which will be sent through an AX.25 device, so form a
+ * special "super class" of normal net devices; split their locks off into a
+ * separate class since they always nest.
+ */
+static struct lock_class_key nr_netdev_xmit_lock_key;
+
+/*
  *	Socket removal during an interrupt is now safe.
  */
 static void nr_remove_socket(struct sock *sk)
@@ -986,18 +994,18 @@
 	nr_make->vl        = 0;
 	nr_make->state     = NR_STATE_3;
 	sk_acceptq_added(sk);
-
-	nr_insert_socket(make);
-
 	skb_queue_head(&sk->sk_receive_queue, skb);
 
-	nr_start_heartbeat(make);
-	nr_start_idletimer(make);
-
 	if (!sock_flag(sk, SOCK_DEAD))
 		sk->sk_data_ready(sk, skb->len);
 
 	bh_unlock_sock(sk);
+
+	nr_insert_socket(make);
+
+	nr_start_heartbeat(make);
+	nr_start_idletimer(make);
+
 	return 1;
 }
 
@@ -1382,14 +1390,12 @@
 		return -1;
 	}
 
-	dev_nr = kmalloc(nr_ndevs * sizeof(struct net_device *), GFP_KERNEL);
+	dev_nr = kzalloc(nr_ndevs * sizeof(struct net_device *), GFP_KERNEL);
 	if (dev_nr == NULL) {
 		printk(KERN_ERR "NET/ROM: nr_proto_init - unable to allocate device array\n");
 		return -1;
 	}
 
-	memset(dev_nr, 0x00, nr_ndevs * sizeof(struct net_device *));
-
 	for (i = 0; i < nr_ndevs; i++) {
 		char name[IFNAMSIZ];
 		struct net_device *dev;
@@ -1407,6 +1413,7 @@
 			free_netdev(dev);
 			goto fail;
 		}
+		lockdep_set_class(&dev->_xmit_lock, &nr_netdev_xmit_lock_key);
 		dev_nr[i] = dev;
 	}
 
diff -urN linux-2.6.18-rc1/net/netrom/nr_timer.c linux-2.6.18-rc2/net/netrom/nr_timer.c
--- linux-2.6.18-rc1/net/netrom/nr_timer.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/net/netrom/nr_timer.c	2006-07-15 22:34:49.301727404 +0000
@@ -138,8 +138,8 @@
 		if (sock_flag(sk, SOCK_DESTROY) ||
 		    (sk->sk_state == TCP_LISTEN && sock_flag(sk, SOCK_DEAD))) {
 			sock_hold(sk);
-			nr_destroy_socket(sk);
 			bh_unlock_sock(sk);
+			nr_destroy_socket(sk);
 			sock_put(sk);
 			return;
 		}
diff -urN linux-2.6.18-rc1/net/rose/af_rose.c linux-2.6.18-rc2/net/rose/af_rose.c
--- linux-2.6.18-rc1/net/rose/af_rose.c	2006-07-15 22:34:43.973148996 +0000
+++ linux-2.6.18-rc2/net/rose/af_rose.c	2006-07-15 22:34:49.301727404 +0000
@@ -67,6 +67,14 @@
 ax25_address rose_callsign;
 
 /*
+ * ROSE network devices are virtual network devices encapsulating ROSE
+ * frames into AX.25 which will be sent through an AX.25 device, so form a
+ * special "super class" of normal net devices; split their locks off into a
+ * separate class since they always nest.
+ */
+static struct lock_class_key rose_netdev_xmit_lock_key;
+
+/*
  *	Convert a ROSE address into text.
  */
 const char *rose2asc(const rose_address *addr)
@@ -1490,14 +1498,13 @@
 
 	rose_callsign = null_ax25_address;
 
-	dev_rose = kmalloc(rose_ndevs * sizeof(struct net_device *), GFP_KERNEL);
+	dev_rose = kzalloc(rose_ndevs * sizeof(struct net_device *), GFP_KERNEL);
 	if (dev_rose == NULL) {
 		printk(KERN_ERR "ROSE: rose_proto_init - unable to allocate device structure\n");
 		rc = -ENOMEM;
 		goto out_proto_unregister;
 	}
 
-	memset(dev_rose, 0x00, rose_ndevs * sizeof(struct net_device*));
 	for (i = 0; i < rose_ndevs; i++) {
 		struct net_device *dev;
 		char name[IFNAMSIZ];
@@ -1516,6 +1523,7 @@
 			free_netdev(dev);
 			goto fail;
 		}
+		lockdep_set_class(&dev->_xmit_lock, &rose_netdev_xmit_lock_key);
 		dev_rose[i] = dev;
 	}
 
diff -urN linux-2.6.18-rc1/net/sched/act_api.c linux-2.6.18-rc2/net/sched/act_api.c
--- linux-2.6.18-rc1/net/sched/act_api.c	2006-07-15 22:34:43.973148996 +0000
+++ linux-2.6.18-rc2/net/sched/act_api.c	2006-07-15 22:34:49.301727404 +0000
@@ -602,8 +602,8 @@
 	return err;
 
 rtattr_failure:
-	module_put(a->ops->owner);
 nlmsg_failure:
+	module_put(a->ops->owner);
 err_out:
 	kfree_skb(skb);
 	kfree(a);
@@ -884,8 +884,6 @@
 		link_p[RTM_GETACTION-RTM_BASE].dumpit = tc_dump_action;
 	}
 
-	printk("TC classifier action (bugs to netdev@vger.kernel.org cc "
-	       "hadi@cyberus.ca)\n");
 	return 0;
 }
 
diff -urN linux-2.6.18-rc1/net/sched/sch_htb.c linux-2.6.18-rc2/net/sched/sch_htb.c
--- linux-2.6.18-rc1/net/sched/sch_htb.c	2006-07-15 22:34:43.981149865 +0000
+++ linux-2.6.18-rc2/net/sched/sch_htb.c	2006-07-15 22:34:49.309728272 +0000
@@ -196,7 +196,7 @@
     struct qdisc_rate_table *rate;	/* rate table of the class itself */
     struct qdisc_rate_table *ceil;	/* ceiling rate (limits borrows too) */
     long buffer,cbuffer;		/* token bucket depth/rate */
-    long mbuffer;			/* max wait time */
+    psched_tdiff_t mbuffer;		/* max wait time */
     long tokens,ctokens;		/* current number of tokens */
     psched_time_t t_c;			/* checkpoint time */
 };
@@ -1601,7 +1601,7 @@
 		/* set class to be in HTB_CAN_SEND state */
 		cl->tokens = hopt->buffer;
 		cl->ctokens = hopt->cbuffer;
-		cl->mbuffer = 60000000; /* 1min */
+		cl->mbuffer = PSCHED_JIFFIE2US(HZ*60); /* 1min */
 		PSCHED_GET_TIME(cl->t_c);
 		cl->cmode = HTB_CAN_SEND;
 
diff -urN linux-2.6.18-rc1/security/selinux/hooks.c linux-2.6.18-rc2/security/selinux/hooks.c
--- linux-2.6.18-rc1/security/selinux/hooks.c	2006-07-15 22:34:44.033155510 +0000
+++ linux-2.6.18-rc2/security/selinux/hooks.c	2006-07-15 22:34:49.365734352 +0000
@@ -246,6 +246,7 @@
 	sbsec->sb = sb;
 	sbsec->sid = SECINITSID_UNLABELED;
 	sbsec->def_sid = SECINITSID_FILE;
+	sbsec->mntpoint_sid = SECINITSID_UNLABELED;
 	sb->s_security = sbsec;
 
 	return 0;
@@ -319,19 +320,53 @@
 	Opt_context = 1,
 	Opt_fscontext = 2,
 	Opt_defcontext = 4,
+	Opt_rootcontext = 8,
 };
 
 static match_table_t tokens = {
 	{Opt_context, "context=%s"},
 	{Opt_fscontext, "fscontext=%s"},
 	{Opt_defcontext, "defcontext=%s"},
+	{Opt_rootcontext, "rootcontext=%s"},
 };
 
 #define SEL_MOUNT_FAIL_MSG "SELinux:  duplicate or incompatible mount options\n"
 
+static int may_context_mount_sb_relabel(u32 sid,
+			struct superblock_security_struct *sbsec,
+			struct task_security_struct *tsec)
+{
+	int rc;
+
+	rc = avc_has_perm(tsec->sid, sbsec->sid, SECCLASS_FILESYSTEM,
+			  FILESYSTEM__RELABELFROM, NULL);
+	if (rc)
+		return rc;
+
+	rc = avc_has_perm(tsec->sid, sid, SECCLASS_FILESYSTEM,
+			  FILESYSTEM__RELABELTO, NULL);
+	return rc;
+}
+
+static int may_context_mount_inode_relabel(u32 sid,
+			struct superblock_security_struct *sbsec,
+			struct task_security_struct *tsec)
+{
+	int rc;
+	rc = avc_has_perm(tsec->sid, sbsec->sid, SECCLASS_FILESYSTEM,
+			  FILESYSTEM__RELABELFROM, NULL);
+	if (rc)
+		return rc;
+
+	rc = avc_has_perm(sid, sbsec->sid, SECCLASS_FILESYSTEM,
+			  FILESYSTEM__ASSOCIATE, NULL);
+	return rc;
+}
+
 static int try_context_mount(struct super_block *sb, void *data)
 {
 	char *context = NULL, *defcontext = NULL;
+	char *fscontext = NULL, *rootcontext = NULL;
 	const char *name;
 	u32 sid;
 	int alloc = 0, rc = 0, seen = 0;
@@ -374,7 +409,7 @@
 
 			switch (token) {
 			case Opt_context:
-				if (seen) {
+				if (seen & (Opt_context|Opt_defcontext)) {
 					rc = -EINVAL;
 					printk(KERN_WARNING SEL_MOUNT_FAIL_MSG);
 					goto out_free;
@@ -390,13 +425,13 @@
 				break;
 
 			case Opt_fscontext:
-				if (seen & (Opt_context|Opt_fscontext)) {
+				if (seen & Opt_fscontext) {
 					rc = -EINVAL;
 					printk(KERN_WARNING SEL_MOUNT_FAIL_MSG);
 					goto out_free;
 				}
-				context = match_strdup(&args[0]);
-				if (!context) {
+				fscontext = match_strdup(&args[0]);
+				if (!fscontext) {
 					rc = -ENOMEM;
 					goto out_free;
 				}
@@ -405,6 +440,22 @@
 				seen |= Opt_fscontext;
 				break;
 
+			case Opt_rootcontext:
+				if (seen & Opt_rootcontext) {
+					rc = -EINVAL;
+					printk(KERN_WARNING SEL_MOUNT_FAIL_MSG);
+					goto out_free;
+				}
+				rootcontext = match_strdup(&args[0]);
+				if (!rootcontext) {
+					rc = -ENOMEM;
+					goto out_free;
+				}
+				if (!alloc)
+					alloc = 1;
+				seen |= Opt_rootcontext;
+				break;
+
 			case Opt_defcontext:
 				if (sbsec->behavior != SECURITY_FS_USE_XATTR) {
 					rc = -EINVAL;
@@ -441,6 +492,28 @@
 	if (!seen)
 		goto out;
 
+	/* sets the context of the superblock for the fs being mounted. */
+	if (fscontext) {
+		rc = security_context_to_sid(fscontext, strlen(fscontext), &sid);
+		if (rc) {
+			printk(KERN_WARNING "SELinux: security_context_to_sid"
+			       "(%s) failed for (dev %s, type %s) errno=%d\n",
+			       fscontext, sb->s_id, name, rc);
+			goto out_free;
+		}
+
+		rc = may_context_mount_sb_relabel(sid, sbsec, tsec);
+		if (rc)
+			goto out_free;
+
+		sbsec->sid = sid;
+	}
+
+	/*
+	 * Switch to using mount point labeling behavior.
+	 * sets the label used on all file below the mountpoint, and will set
+	 * the superblock context if not already set.
+	 */
 	if (context) {
 		rc = security_context_to_sid(context, strlen(context), &sid);
 		if (rc) {
@@ -450,20 +523,38 @@
 			goto out_free;
 		}
 
-		rc = avc_has_perm(tsec->sid, sbsec->sid, SECCLASS_FILESYSTEM,
-		                  FILESYSTEM__RELABELFROM, NULL);
-		if (rc)
+		if (!fscontext) {
+			rc = may_context_mount_sb_relabel(sid, sbsec, tsec);
+			if (rc)
+				goto out_free;
+			sbsec->sid = sid;
+		} else {
+			rc = may_context_mount_inode_relabel(sid, sbsec, tsec);
+			if (rc)
+				goto out_free;
+		}
+		sbsec->mntpoint_sid = sid;
+
+		sbsec->behavior = SECURITY_FS_USE_MNTPOINT;
+	}
+
+	if (rootcontext) {
+		struct inode *inode = sb->s_root->d_inode;
+		struct inode_security_struct *isec = inode->i_security;
+		rc = security_context_to_sid(rootcontext, strlen(rootcontext), &sid);
+		if (rc) {
+			printk(KERN_WARNING "SELinux: security_context_to_sid"
+			       "(%s) failed for (dev %s, type %s) errno=%d\n",
+			       rootcontext, sb->s_id, name, rc);
 			goto out_free;
+		}
 
-		rc = avc_has_perm(tsec->sid, sid, SECCLASS_FILESYSTEM,
-		                  FILESYSTEM__RELABELTO, NULL);
+		rc = may_context_mount_inode_relabel(sid, sbsec, tsec);
 		if (rc)
 			goto out_free;
 
-		sbsec->sid = sid;
-
-		if (seen & Opt_context)
-			sbsec->behavior = SECURITY_FS_USE_MNTPOINT;
+		isec->sid = sid;
+		isec->initialized = 1;
 	}
 
 	if (defcontext) {
@@ -478,13 +569,7 @@
 		if (sid == sbsec->def_sid)
 			goto out_free;
 
-		rc = avc_has_perm(tsec->sid, sbsec->sid, SECCLASS_FILESYSTEM,
-				  FILESYSTEM__RELABELFROM, NULL);
-		if (rc)
-			goto out_free;
-
-		rc = avc_has_perm(sid, sbsec->sid, SECCLASS_FILESYSTEM,
-				  FILESYSTEM__ASSOCIATE, NULL);
+		rc = may_context_mount_inode_relabel(sid, sbsec, tsec);
 		if (rc)
 			goto out_free;
 
@@ -495,6 +580,8 @@
 	if (alloc) {
 		kfree(context);
 		kfree(defcontext);
+		kfree(fscontext);
+		kfree(rootcontext);
 	}
 out:
 	return rc;
@@ -876,8 +963,11 @@
 			goto out;
 		isec->sid = sid;
 		break;
+	case SECURITY_FS_USE_MNTPOINT:
+		isec->sid = sbsec->mntpoint_sid;
+		break;
 	default:
-		/* Default to the fs SID. */
+		/* Default to the fs superblock SID. */
 		isec->sid = sbsec->sid;
 
 		if (sbsec->proc) {
@@ -1843,7 +1933,8 @@
 {
 	return (match_prefix("context=", sizeof("context=")-1, option, len) ||
 	        match_prefix("fscontext=", sizeof("fscontext=")-1, option, len) ||
-	        match_prefix("defcontext=", sizeof("defcontext=")-1, option, len));
+	        match_prefix("defcontext=", sizeof("defcontext=")-1, option, len) ||
+		match_prefix("rootcontext=", sizeof("rootcontext=")-1, option, len));
 }
 
 static inline void take_option(char **to, char *from, int *first, int len)
diff -urN linux-2.6.18-rc1/security/selinux/include/objsec.h linux-2.6.18-rc2/security/selinux/include/objsec.h
--- linux-2.6.18-rc1/security/selinux/include/objsec.h	2006-07-15 22:34:44.037155944 +0000
+++ linux-2.6.18-rc2/security/selinux/include/objsec.h	2006-07-15 22:34:49.365734352 +0000
@@ -57,8 +57,9 @@
 struct superblock_security_struct {
 	struct super_block *sb;         /* back pointer to sb object */
 	struct list_head list;          /* list of superblock_security_struct */
-	u32 sid;              /* SID of file system */
+	u32 sid;			/* SID of file system superblock */
 	u32 def_sid;			/* default SID for labeling */
+	u32 mntpoint_sid;		/* SECURITY_FS_USE_MNTPOINT context for files */
 	unsigned int behavior;          /* labeling behavior */
 	unsigned char initialized;      /* initialization flag */
 	unsigned char proc;             /* proc fs */
diff -urN linux-2.6.18-rc1/sound/aoa/Makefile linux-2.6.18-rc2/sound/aoa/Makefile
--- linux-2.6.18-rc1/sound/aoa/Makefile	2006-07-15 22:34:44.037155944 +0000
+++ linux-2.6.18-rc2/sound/aoa/Makefile	2006-07-15 22:34:49.369734786 +0000
@@ -1,4 +1,4 @@
 obj-$(CONFIG_SND_AOA) += core/
-obj-$(CONFIG_SND_AOA) += codecs/
-obj-$(CONFIG_SND_AOA) += fabrics/
 obj-$(CONFIG_SND_AOA_SOUNDBUS) += soundbus/
+obj-$(CONFIG_SND_AOA) += fabrics/
+obj-$(CONFIG_SND_AOA) += codecs/
diff -urN linux-2.6.18-rc1/sound/aoa/codecs/snd-aoa-codec-tas-basstreble.h linux-2.6.18-rc2/sound/aoa/codecs/snd-aoa-codec-tas-basstreble.h
--- linux-2.6.18-rc1/sound/aoa/codecs/snd-aoa-codec-tas-basstreble.h	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.18-rc2/sound/aoa/codecs/snd-aoa-codec-tas-basstreble.h	2006-07-15 22:34:49.369734786 +0000
@@ -0,0 +1,134 @@
+/*
+ * This file is only included exactly once!
+ *
+ * The tables here are derived from the tas3004 datasheet,
+ * modulo typo corrections and some smoothing...
+ */
+
+#define TAS3004_TREBLE_MIN	0
+#define TAS3004_TREBLE_MAX	72
+#define TAS3004_BASS_MIN	0
+#define TAS3004_BASS_MAX	72
+#define TAS3004_TREBLE_ZERO	36
+#define TAS3004_BASS_ZERO	36
+
+static u8 tas3004_treble_table[] = {
+	150, /* -18 dB */
+	149,
+	148,
+	147,
+	146,
+	145,
+	144,
+	143,
+	142,
+	141,
+	140,
+	139,
+	138,
+	137,
+	136,
+	135,
+	134,
+	133,
+	132,
+	131,
+	130,
+	129,
+	128,
+	127,
+	126,
+	125,
+	124,
+	123,
+	122,
+	121,
+	120,
+	119,
+	118,
+	117,
+	116,
+	115,
+	114, /* 0 dB */
+	113,
+	112,
+	111,
+	109,
+	108,
+	107,
+	105,
+	104,
+	103,
+	101,
+	99,
+	98,
+	96,
+	93,
+	91,
+	89,
+	86,
+	83,
+	81,
+	77,
+	74,
+	71,
+	67,
+	63,
+	59,
+	54,
+	49,
+	44,
+	38,
+	32,
+	26,
+	19,
+	10,
+	4,
+	2,
+	1, /* +18 dB */
+};
+
+static inline u8 tas3004_treble(int idx)
+{
+	return tas3004_treble_table[idx];
+}
+
+/* I only save the difference here to the treble table
+ * so that the binary is smaller...
+ * I have also ignored completely differences of
+ * +/- 1
+ */
+static s8 tas3004_bass_diff_to_treble[] = {
+	2, /* 7 dB, offset 50 */
+	2,
+	2,
+	2,
+	2,
+	1,
+	2,
+	2,
+	2,
+	3,
+	4,
+	4,
+	5,
+	6,
+	7,
+	8,
+	9,
+	10,
+	11,
+	14,
+	13,
+	8,
+	1, /* 18 dB */
+};
+
+static inline u8 tas3004_bass(int idx)
+{
+	u8 result = tas3004_treble_table[idx];
+
+	if (idx >= 50)
+		result += tas3004_bass_diff_to_treble[idx-50];
+	return result;
+}
diff -urN linux-2.6.18-rc1/sound/aoa/codecs/snd-aoa-codec-tas.c linux-2.6.18-rc2/sound/aoa/codecs/snd-aoa-codec-tas.c
--- linux-2.6.18-rc1/sound/aoa/codecs/snd-aoa-codec-tas.c	2006-07-15 22:34:44.041156379 +0000
+++ linux-2.6.18-rc2/sound/aoa/codecs/snd-aoa-codec-tas.c	2006-07-15 22:34:49.373735220 +0000
@@ -72,22 +72,29 @@
 
 #include "snd-aoa-codec-tas.h"
 #include "snd-aoa-codec-tas-gain-table.h"
+#include "snd-aoa-codec-tas-basstreble.h"
 #include "../aoa.h"
 #include "../soundbus/soundbus.h"
 
-
 #define PFX "snd-aoa-codec-tas: "
 
+
 struct tas {
 	struct aoa_codec	codec;
 	struct i2c_client	i2c;
-	u32			muted_l:1, muted_r:1,
-				controls_created:1;
+	u32			mute_l:1, mute_r:1 ,
+				controls_created:1 ,
+				drc_enabled:1,
+				hw_enabled:1;
 	u8			cached_volume_l, cached_volume_r;
 	u8			mixer_l[3], mixer_r[3];
+	u8			bass, treble;
 	u8			acr;
+	int			drc_range;
 };
 
+static int tas_reset_init(struct tas *tas);
+
 static struct tas *codec_to_tas(struct aoa_codec *codec)
 {
 	return container_of(codec, struct tas, codec);
@@ -101,6 +108,44 @@
 		return i2c_smbus_write_i2c_block_data(&tas->i2c, reg, len, data);
 }
 
+static void tas3004_set_drc(struct tas *tas)
+{
+	unsigned char val[6];
+
+	if (tas->drc_enabled)
+		val[0] = 0x50; /* 3:1 above threshold */
+	else
+		val[0] = 0x51; /* disabled */
+	val[1] = 0x02; /* 1:1 below threshold */
+	if (tas->drc_range > 0xef)
+		val[2] = 0xef;
+	else if (tas->drc_range < 0)
+		val[2] = 0x00;
+	else
+		val[2] = tas->drc_range;
+	val[3] = 0xb0;
+	val[4] = 0x60;
+	val[5] = 0xa0;
+
+	tas_write_reg(tas, TAS_REG_DRC, 6, val);
+}
+
+static void tas_set_treble(struct tas *tas)
+{
+	u8 tmp;
+
+	tmp = tas3004_treble(tas->treble);
+	tas_write_reg(tas, TAS_REG_TREBLE, 1, &tmp);
+}
+
+static void tas_set_bass(struct tas *tas)
+{
+	u8 tmp;
+
+	tmp = tas3004_bass(tas->bass);
+	tas_write_reg(tas, TAS_REG_BASS, 1, &tmp);
+}
+
 static void tas_set_volume(struct tas *tas)
 {
 	u8 block[6];
@@ -113,8 +158,8 @@
 	if (left > 177) left = 177;
 	if (right > 177) right = 177;
 
-	if (tas->muted_l) left = 0;
-	if (tas->muted_r) right = 0;
+	if (tas->mute_l) left = 0;
+	if (tas->mute_r) right = 0;
 
 	/* analysing the volume and mixer tables shows
 	 * that they are similar enough when we shift
@@ -202,7 +247,8 @@
 
 	tas->cached_volume_l = ucontrol->value.integer.value[0];
 	tas->cached_volume_r = ucontrol->value.integer.value[1];
-	tas_set_volume(tas);
+	if (tas->hw_enabled)
+		tas_set_volume(tas);
 	return 1;
 }
 
@@ -230,8 +276,8 @@
 {
 	struct tas *tas = snd_kcontrol_chip(kcontrol);
 
-	ucontrol->value.integer.value[0] = !tas->muted_l;
-	ucontrol->value.integer.value[1] = !tas->muted_r;
+	ucontrol->value.integer.value[0] = !tas->mute_l;
+	ucontrol->value.integer.value[1] = !tas->mute_r;
 	return 0;
 }
 
@@ -240,13 +286,14 @@
 {
 	struct tas *tas = snd_kcontrol_chip(kcontrol);
 
-	if (tas->muted_l == !ucontrol->value.integer.value[0]
-	 && tas->muted_r == !ucontrol->value.integer.value[1])
+	if (tas->mute_l == !ucontrol->value.integer.value[0]
+	 && tas->mute_r == !ucontrol->value.integer.value[1])
 		return 0;
 
-	tas->muted_l = !ucontrol->value.integer.value[0];
-	tas->muted_r = !ucontrol->value.integer.value[1];
-	tas_set_volume(tas);
+	tas->mute_l = !ucontrol->value.integer.value[0];
+	tas->mute_r = !ucontrol->value.integer.value[1];
+	if (tas->hw_enabled)
+		tas_set_volume(tas);
 	return 1;
 }
 
@@ -294,7 +341,8 @@
 	tas->mixer_l[idx] = ucontrol->value.integer.value[0];
 	tas->mixer_r[idx] = ucontrol->value.integer.value[1];
 
-	tas_set_mixer(tas);
+	if (tas->hw_enabled)
+		tas_set_mixer(tas);
 	return 1;
 }
 
@@ -309,9 +357,93 @@
 	.private_value = idx,				\
 }
 
-MIXER_CONTROL(pcm1, "PCM1", 0);
+MIXER_CONTROL(pcm1, "PCM", 0);
 MIXER_CONTROL(monitor, "Monitor", 2);
 
+static int tas_snd_drc_range_info(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = TAS3004_DRC_MAX;
+	return 0;
+}
+
+static int tas_snd_drc_range_get(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct tas *tas = snd_kcontrol_chip(kcontrol);
+
+	ucontrol->value.integer.value[0] = tas->drc_range;
+	return 0;
+}
+
+static int tas_snd_drc_range_put(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct tas *tas = snd_kcontrol_chip(kcontrol);
+
+	if (tas->drc_range == ucontrol->value.integer.value[0])
+		return 0;
+
+	tas->drc_range = ucontrol->value.integer.value[0];
+	if (tas->hw_enabled)
+		tas3004_set_drc(tas);
+	return 1;
+}
+
+static struct snd_kcontrol_new drc_range_control = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "DRC Range",
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.info = tas_snd_drc_range_info,
+	.get = tas_snd_drc_range_get,
+	.put = tas_snd_drc_range_put,
+};
+
+static int tas_snd_drc_switch_info(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 1;
+	return 0;
+}
+
+static int tas_snd_drc_switch_get(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct tas *tas = snd_kcontrol_chip(kcontrol);
+
+	ucontrol->value.integer.value[0] = tas->drc_enabled;
+	return 0;
+}
+
+static int tas_snd_drc_switch_put(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct tas *tas = snd_kcontrol_chip(kcontrol);
+
+	if (tas->drc_enabled == ucontrol->value.integer.value[0])
+		return 0;
+
+	tas->drc_enabled = ucontrol->value.integer.value[0];
+	if (tas->hw_enabled)
+		tas3004_set_drc(tas);
+	return 1;
+}
+
+static struct snd_kcontrol_new drc_switch_control = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "DRC Range Switch",
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.info = tas_snd_drc_switch_info,
+	.get = tas_snd_drc_switch_get,
+	.put = tas_snd_drc_switch_put,
+};
+
 static int tas_snd_capture_source_info(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_info *uinfo)
 {
@@ -346,7 +478,8 @@
 		tas->acr |= TAS_ACR_INPUT_B;
 	if (oldacr == tas->acr)
 		return 0;
-	tas_write_reg(tas, TAS_REG_ACR, 1, &tas->acr);
+	if (tas->hw_enabled)
+		tas_write_reg(tas, TAS_REG_ACR, 1, &tas->acr);
 	return 1;
 }
 
@@ -370,6 +503,89 @@
 	.put = tas_snd_capture_source_put,
 };
 
+static int tas_snd_treble_info(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = TAS3004_TREBLE_MIN;
+	uinfo->value.integer.max = TAS3004_TREBLE_MAX;
+	return 0;
+}
+
+static int tas_snd_treble_get(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct tas *tas = snd_kcontrol_chip(kcontrol);
+
+	ucontrol->value.integer.value[0] = tas->treble;
+	return 0;
+}
+
+static int tas_snd_treble_put(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct tas *tas = snd_kcontrol_chip(kcontrol);
+
+	if (tas->treble == ucontrol->value.integer.value[0])
+		return 0;
+
+	tas->treble = ucontrol->value.integer.value[0];
+	if (tas->hw_enabled)
+		tas_set_treble(tas);
+	return 1;
+}
+
+static struct snd_kcontrol_new treble_control = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Treble",
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.info = tas_snd_treble_info,
+	.get = tas_snd_treble_get,
+	.put = tas_snd_treble_put,
+};
+
+static int tas_snd_bass_info(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = TAS3004_BASS_MIN;
+	uinfo->value.integer.max = TAS3004_BASS_MAX;
+	return 0;
+}
+
+static int tas_snd_bass_get(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct tas *tas = snd_kcontrol_chip(kcontrol);
+
+	ucontrol->value.integer.value[0] = tas->bass;
+	return 0;
+}
+
+static int tas_snd_bass_put(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct tas *tas = snd_kcontrol_chip(kcontrol);
+
+	if (tas->bass == ucontrol->value.integer.value[0])
+		return 0;
+
+	tas->bass = ucontrol->value.integer.value[0];
+	if (tas->hw_enabled)
+		tas_set_bass(tas);
+	return 1;
+}
+
+static struct snd_kcontrol_new bass_control = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Bass",
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.info = tas_snd_bass_info,
+	.get = tas_snd_bass_get,
+	.put = tas_snd_bass_put,
+};
 
 static struct transfer_info tas_transfers[] = {
 	{
@@ -399,26 +615,67 @@
 static int tas_reset_init(struct tas *tas)
 {
 	u8 tmp;
+
+	tas->codec.gpio->methods->all_amps_off(tas->codec.gpio);
+	msleep(5);
 	tas->codec.gpio->methods->set_hw_reset(tas->codec.gpio, 0);
-	msleep(1);
+	msleep(5);
 	tas->codec.gpio->methods->set_hw_reset(tas->codec.gpio, 1);
-	msleep(1);
+	msleep(20);
 	tas->codec.gpio->methods->set_hw_reset(tas->codec.gpio, 0);
-	msleep(1);
-
-	tas->acr &= ~TAS_ACR_ANALOG_PDOWN;
-	tas->acr |= TAS_ACR_B_MONAUREAL | TAS_ACR_B_MON_SEL_RIGHT;
-	if (tas_write_reg(tas, TAS_REG_ACR, 1, &tas->acr))
-		return -ENODEV;
+	msleep(10);
+	tas->codec.gpio->methods->all_amps_restore(tas->codec.gpio);
 
 	tmp = TAS_MCS_SCLK64 | TAS_MCS_SPORT_MODE_I2S | TAS_MCS_SPORT_WL_24BIT;
 	if (tas_write_reg(tas, TAS_REG_MCS, 1, &tmp))
 		return -ENODEV;
 
+	tas->acr |= TAS_ACR_ANALOG_PDOWN | TAS_ACR_B_MONAUREAL |
+		TAS_ACR_B_MON_SEL_RIGHT;
+	if (tas_write_reg(tas, TAS_REG_ACR, 1, &tas->acr))
+		return -ENODEV;
+
 	tmp = 0;
 	if (tas_write_reg(tas, TAS_REG_MCS2, 1, &tmp))
 		return -ENODEV;
 
+	tas3004_set_drc(tas);
+
+	/* Set treble & bass to 0dB */
+	tas->treble = TAS3004_TREBLE_ZERO;
+	tas->bass = TAS3004_BASS_ZERO;
+	tas_set_treble(tas);
+	tas_set_bass(tas);
+
+	tas->acr &= ~TAS_ACR_ANALOG_PDOWN;
+	if (tas_write_reg(tas, TAS_REG_ACR, 1, &tas->acr))
+		return -ENODEV;
+
+	return 0;
+}
+
+static int tas_switch_clock(struct codec_info_item *cii, enum clock_switch clock)
+{
+	struct tas *tas = cii->codec_data;
+
+	switch(clock) {
+	case CLOCK_SWITCH_PREPARE_SLAVE:
+		/* Clocks are going away, mute mute mute */
+		tas->codec.gpio->methods->all_amps_off(tas->codec.gpio);
+		tas->hw_enabled = 0;
+		break;
+	case CLOCK_SWITCH_SLAVE:
+		/* Clocks are back, re-init the codec */
+		tas_reset_init(tas);
+		tas_set_volume(tas);
+		tas_set_mixer(tas);
+		tas->hw_enabled = 1;
+		tas->codec.gpio->methods->all_amps_restore(tas->codec.gpio);
+		break;
+	default:
+		/* doesn't happen as of now */
+		return -EINVAL;
+	}
 	return 0;
 }
 
@@ -427,6 +684,7 @@
  * our i2c device is suspended, and then take note of that! */
 static int tas_suspend(struct tas *tas)
 {
+	tas->hw_enabled = 0;
 	tas->acr |= TAS_ACR_ANALOG_PDOWN;
 	tas_write_reg(tas, TAS_REG_ACR, 1, &tas->acr);
 	return 0;
@@ -438,6 +696,7 @@
 	tas_reset_init(tas);
 	tas_set_volume(tas);
 	tas_set_mixer(tas);
+	tas->hw_enabled = 1;
 	return 0;
 }
 
@@ -463,6 +722,7 @@
 	.bus_factor = 64,
 	.owner = THIS_MODULE,
 	.usable = tas_usable,
+	.switch_clock = tas_switch_clock,
 #ifdef CONFIG_PM
 	.suspend = _tas_suspend,
 	.resume = _tas_resume,
@@ -483,6 +743,7 @@
 		printk(KERN_ERR PFX "tas failed to initialise\n");
 		return -ENXIO;
 	}
+	tas->hw_enabled = 1;
 
 	if (tas->codec.soundbus_dev->attach_codec(tas->codec.soundbus_dev,
 						   aoa_get_card(),
@@ -515,6 +776,22 @@
 	if (err)
 		goto error;
 
+	err = aoa_snd_ctl_add(snd_ctl_new1(&drc_range_control, tas));
+	if (err)
+		goto error;
+
+	err = aoa_snd_ctl_add(snd_ctl_new1(&drc_switch_control, tas));
+	if (err)
+		goto error;
+
+	err = aoa_snd_ctl_add(snd_ctl_new1(&treble_control, tas));
+	if (err)
+		goto error;
+
+	err = aoa_snd_ctl_add(snd_ctl_new1(&bass_control, tas));
+	if (err)
+		goto error;
+
 	return 0;
  error:
 	tas->codec.soundbus_dev->detach_codec(tas->codec.soundbus_dev, tas);
@@ -548,6 +825,8 @@
 	tas->i2c.driver = &tas_driver;
 	tas->i2c.adapter = adapter;
 	tas->i2c.addr = addr;
+	/* seems that half is a saner default */
+	tas->drc_range = TAS3004_DRC_MAX / 2;
 	strlcpy(tas->i2c.name, "tas audio codec", I2C_NAME_SIZE-1);
 
 	if (i2c_attach_client(&tas->i2c)) {
@@ -564,7 +843,9 @@
 	if (aoa_codec_register(&tas->codec)) {
 		goto detach;
 	}
-	printk(KERN_DEBUG "snd-aoa-codec-tas: created and attached tas instance\n");
+	printk(KERN_DEBUG
+	       "snd-aoa-codec-tas: tas found, addr 0x%02x on %s\n",
+	       addr, node->full_name);
 	return 0;
  detach:
 	i2c_detach_client(&tas->i2c);
diff -urN linux-2.6.18-rc1/sound/aoa/codecs/snd-aoa-codec-tas.h linux-2.6.18-rc2/sound/aoa/codecs/snd-aoa-codec-tas.h
--- linux-2.6.18-rc1/sound/aoa/codecs/snd-aoa-codec-tas.h	2006-07-15 22:34:44.041156379 +0000
+++ linux-2.6.18-rc2/sound/aoa/codecs/snd-aoa-codec-tas.h	2006-07-15 22:34:49.373735220 +0000
@@ -44,4 +44,12 @@
 #define TAS_REG_LEFT_BIQUAD6	0x10
 #define TAS_REG_RIGHT_BIQUAD6	0x19
 
+#define TAS_REG_LEFT_LOUDNESS		0x21
+#define TAS_REG_RIGHT_LOUDNESS		0x22
+#define TAS_REG_LEFT_LOUDNESS_GAIN	0x23
+#define TAS_REG_RIGHT_LOUDNESS_GAIN	0x24
+
+#define TAS3001_DRC_MAX		0x5f
+#define TAS3004_DRC_MAX		0xef
+
 #endif /* __SND_AOA_CODECTASH */
diff -urN linux-2.6.18-rc1/sound/aoa/core/snd-aoa-gpio-pmf.c linux-2.6.18-rc2/sound/aoa/core/snd-aoa-gpio-pmf.c
--- linux-2.6.18-rc1/sound/aoa/core/snd-aoa-gpio-pmf.c	2006-07-15 22:34:44.041156379 +0000
+++ linux-2.6.18-rc2/sound/aoa/core/snd-aoa-gpio-pmf.c	2006-07-15 22:34:49.373735220 +0000
@@ -14,9 +14,13 @@
 static void pmf_gpio_set_##name(struct gpio_runtime *rt, int on)\
 {								\
 	struct pmf_args args = { .count = 1, .u[0].v = !on };	\
-								\
+	int rc;							\
+							\
 	if (unlikely(!rt)) return;				\
-	pmf_call_function(rt->node, #name "-mute", &args);	\
+	rc = pmf_call_function(rt->node, #name "-mute", &args);	\
+	if (rc)							\
+		printk(KERN_WARNING "pmf_gpio_set_" #name	\
+		" failed, rc: %d\n", rc);			\
 	rt->implementation_private &= ~(1<<bit);		\
 	rt->implementation_private |= (!!on << bit);		\
 }								\
@@ -33,9 +37,13 @@
 static void pmf_gpio_set_hw_reset(struct gpio_runtime *rt, int on)
 {
 	struct pmf_args args = { .count = 1, .u[0].v = !!on };
+	int rc;
 
 	if (unlikely(!rt)) return;
-	pmf_call_function(rt->node, "hw-reset", &args);
+	rc = pmf_call_function(rt->node, "hw-reset", &args);
+	if (rc)
+		printk(KERN_WARNING "pmf_gpio_set_hw_reset"
+		       " failed, rc: %d\n", rc);
 }
 
 static void pmf_gpio_all_amps_off(struct gpio_runtime *rt)
diff -urN linux-2.6.18-rc1/sound/aoa/fabrics/snd-aoa-fabric-layout.c linux-2.6.18-rc2/sound/aoa/fabrics/snd-aoa-fabric-layout.c
--- linux-2.6.18-rc1/sound/aoa/fabrics/snd-aoa-fabric-layout.c	2006-07-15 22:34:44.045156813 +0000
+++ linux-2.6.18-rc2/sound/aoa/fabrics/snd-aoa-fabric-layout.c	2006-07-15 22:34:49.373735220 +0000
@@ -77,24 +77,39 @@
 	int pcmid;
 };
 
+MODULE_ALIAS("sound-layout-36");
 MODULE_ALIAS("sound-layout-41");
 MODULE_ALIAS("sound-layout-45");
+MODULE_ALIAS("sound-layout-47");
+MODULE_ALIAS("sound-layout-48");
+MODULE_ALIAS("sound-layout-49");
+MODULE_ALIAS("sound-layout-50");
 MODULE_ALIAS("sound-layout-51");
+MODULE_ALIAS("sound-layout-56");
+MODULE_ALIAS("sound-layout-57");
 MODULE_ALIAS("sound-layout-58");
 MODULE_ALIAS("sound-layout-60");
 MODULE_ALIAS("sound-layout-61");
+MODULE_ALIAS("sound-layout-62");
 MODULE_ALIAS("sound-layout-64");
 MODULE_ALIAS("sound-layout-65");
+MODULE_ALIAS("sound-layout-66");
+MODULE_ALIAS("sound-layout-67");
 MODULE_ALIAS("sound-layout-68");
 MODULE_ALIAS("sound-layout-69");
 MODULE_ALIAS("sound-layout-70");
 MODULE_ALIAS("sound-layout-72");
+MODULE_ALIAS("sound-layout-76");
 MODULE_ALIAS("sound-layout-80");
 MODULE_ALIAS("sound-layout-82");
 MODULE_ALIAS("sound-layout-84");
 MODULE_ALIAS("sound-layout-86");
+MODULE_ALIAS("sound-layout-90");
 MODULE_ALIAS("sound-layout-92");
+MODULE_ALIAS("sound-layout-94");
 MODULE_ALIAS("sound-layout-96");
+MODULE_ALIAS("sound-layout-98");
+MODULE_ALIAS("sound-layout-100");
 
 /* onyx with all but microphone connected */
 static struct codec_connection onyx_connections_nomic[] = {
@@ -950,11 +965,12 @@
 	layout_id = (unsigned int *) get_property(sound, "layout-id", NULL);
 	if (!layout_id)
 		goto outnodev;
-	printk(KERN_INFO "snd-aoa-fabric-layout: found bus with layout %d ", *layout_id);
+	printk(KERN_INFO "snd-aoa-fabric-layout: found bus with layout %d\n",
+	       *layout_id);
 
 	layout = find_layout_by_id(*layout_id);
 	if (!layout) {
-		printk("(no idea how to handle)\n");
+		printk(KERN_ERR "snd-aoa-fabric-layout: unknown layout\n");
 		goto outnodev;
 	}
 
@@ -972,15 +988,17 @@
 	case 51: /* PowerBook5,4 */
 	case 58: /* Mac Mini */
 		ldev->gpio.methods = ftr_gpio_methods;
+		printk(KERN_DEBUG
+		       "snd-aoa-fabric-layout: Using direct GPIOs\n");
 		break;
 	default:
 		ldev->gpio.methods = pmf_gpio_methods;
+		printk(KERN_DEBUG
+		       "snd-aoa-fabric-layout: Using PMF GPIOs\n");
 	}
 	ldev->selfptr_headphone.ptr = ldev;
 	ldev->selfptr_lineout.ptr = ldev;
 	sdev->ofdev.dev.driver_data = ldev;
-
-	printk("(using)\n");
 	list_add(&ldev->list, &layouts_list);
 	layouts_list_items++;
 
diff -urN linux-2.6.18-rc1/sound/aoa/soundbus/core.c linux-2.6.18-rc2/sound/aoa/soundbus/core.c
--- linux-2.6.18-rc1/sound/aoa/soundbus/core.c	2006-07-15 22:34:44.045156813 +0000
+++ linux-2.6.18-rc2/sound/aoa/soundbus/core.c	2006-07-15 22:34:49.373735220 +0000
@@ -194,16 +194,6 @@
 	.dev_attrs	= soundbus_dev_attrs,
 };
 
-static int __init soundbus_init(void)
-{
-	return bus_register(&soundbus_bus_type);
-}
-
-static void __exit soundbus_exit(void)
-{
-	bus_unregister(&soundbus_bus_type);
-}
-
 int soundbus_add_one(struct soundbus_dev *dev)
 {
 	static int devcount;
@@ -246,5 +236,15 @@
 }
 EXPORT_SYMBOL_GPL(soundbus_unregister_driver);
 
-module_init(soundbus_init);
+static int __init soundbus_init(void)
+{
+	return bus_register(&soundbus_bus_type);
+}
+
+static void __exit soundbus_exit(void)
+{
+	bus_unregister(&soundbus_bus_type);
+}
+
+subsys_initcall(soundbus_init);
 module_exit(soundbus_exit);
diff -urN linux-2.6.18-rc1/sound/aoa/soundbus/i2sbus/i2sbus-control.c linux-2.6.18-rc2/sound/aoa/soundbus/i2sbus/i2sbus-control.c
--- linux-2.6.18-rc1/sound/aoa/soundbus/i2sbus/i2sbus-control.c	2006-07-15 22:34:44.045156813 +0000
+++ linux-2.6.18-rc2/sound/aoa/soundbus/i2sbus/i2sbus-control.c	2006-07-15 22:34:49.377735654 +0000
@@ -6,12 +6,16 @@
  * GPL v2, can be found in COPYING.
  */
 
-#include <asm/io.h>
+#include <linux/kernel.h>
 #include <linux/delay.h>
+
+#include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/macio.h>
 #include <asm/pmac_feature.h>
 #include <asm/pmac_pfunc.h>
+#include <asm/keylargo.h>
+
 #include "i2sbus.h"
 
 int i2sbus_control_init(struct macio_dev* dev, struct i2sbus_control **c)
@@ -22,26 +26,12 @@
 
 	INIT_LIST_HEAD(&(*c)->list);
 
-	if (of_address_to_resource(dev->ofdev.node, 0, &(*c)->rsrc))
-		goto err;
-	/* we really should be using feature calls instead of mapping
-	 * these registers. It's safe for now since no one else is
-	 * touching them... */
-	(*c)->controlregs = ioremap((*c)->rsrc.start,
-				    sizeof(struct i2s_control_regs));
-	if (!(*c)->controlregs)
-		goto err;
-
+	(*c)->macio = dev->bus->chip;
 	return 0;
- err:
-	kfree(*c);
-	*c = NULL;
-	return -ENODEV;
 }
 
 void i2sbus_control_destroy(struct i2sbus_control *c)
 {
-	iounmap(c->controlregs);
 	kfree(c);
 }
 
@@ -93,19 +83,22 @@
 			  struct i2sbus_dev *i2sdev)
 {
 	struct pmf_args args = { .count = 0 };
-	int cc;
+	struct macio_chip *macio = c->macio;
 
 	if (i2sdev->enable)
 		return pmf_call_one(i2sdev->enable, &args);
 
+	if (macio == NULL || macio->base == NULL)
+		return -ENODEV;
+
 	switch (i2sdev->bus_number) {
 	case 0:
-		cc = in_le32(&c->controlregs->cell_control);
-		out_le32(&c->controlregs->cell_control, cc | CTRL_CLOCK_INTF_0_ENABLE);
+		/* these need to be locked or done through
+		 * newly created feature calls! */
+		MACIO_BIS(KEYLARGO_FCR1, KL1_I2S0_ENABLE);
 		break;
 	case 1:
-		cc = in_le32(&c->controlregs->cell_control);
-		out_le32(&c->controlregs->cell_control, cc | CTRL_CLOCK_INTF_1_ENABLE);
+		MACIO_BIS(KEYLARGO_FCR1, KL1_I2S1_ENABLE);
 		break;
 	default:
 		return -ENODEV;
@@ -118,7 +111,7 @@
 			int enable)
 {
 	struct pmf_args args = { .count = 0 };
-	int cc;
+	struct macio_chip *macio = c->macio;
 
 	switch (enable) {
 	case 0:
@@ -133,18 +126,22 @@
 		printk(KERN_ERR "i2sbus: INVALID CELL ENABLE VALUE\n");
 		return -ENODEV;
 	}
+
+	if (macio == NULL || macio->base == NULL)
+		return -ENODEV;
+
 	switch (i2sdev->bus_number) {
 	case 0:
-		cc = in_le32(&c->controlregs->cell_control);
-		cc &= ~CTRL_CLOCK_CELL_0_ENABLE;
-		cc |= enable * CTRL_CLOCK_CELL_0_ENABLE;
-		out_le32(&c->controlregs->cell_control, cc);
+		if (enable)
+			MACIO_BIS(KEYLARGO_FCR1, KL1_I2S0_CELL_ENABLE);
+		else
+			MACIO_BIC(KEYLARGO_FCR1, KL1_I2S0_CELL_ENABLE);
 		break;
 	case 1:
-		cc = in_le32(&c->controlregs->cell_control);
-		cc &= ~CTRL_CLOCK_CELL_1_ENABLE;
-		cc |= enable * CTRL_CLOCK_CELL_1_ENABLE;
-		out_le32(&c->controlregs->cell_control, cc);
+		if (enable)
+			MACIO_BIS(KEYLARGO_FCR1, KL1_I2S1_CELL_ENABLE);
+		else
+			MACIO_BIC(KEYLARGO_FCR1, KL1_I2S1_CELL_ENABLE);
 		break;
 	default:
 		return -ENODEV;
@@ -157,7 +154,7 @@
 			 int enable)
 {
 	struct pmf_args args = { .count = 0 };
-	int cc;
+	struct macio_chip *macio = c->macio;
 
 	switch (enable) {
 	case 0:
@@ -172,18 +169,22 @@
 		printk(KERN_ERR "i2sbus: INVALID CLOCK ENABLE VALUE\n");
 		return -ENODEV;
 	}
+
+	if (macio == NULL || macio->base == NULL)
+		return -ENODEV;
+
 	switch (i2sdev->bus_number) {
 	case 0:
-		cc = in_le32(&c->controlregs->cell_control);
-		cc &= ~CTRL_CLOCK_CLOCK_0_ENABLE;
-		cc |= enable * CTRL_CLOCK_CLOCK_0_ENABLE;
-		out_le32(&c->controlregs->cell_control, cc);
+		if (enable)
+			MACIO_BIS(KEYLARGO_FCR1, KL1_I2S0_CLK_ENABLE_BIT);
+		else
+			MACIO_BIC(KEYLARGO_FCR1, KL1_I2S0_CLK_ENABLE_BIT);
 		break;
 	case 1:
-		cc = in_le32(&c->controlregs->cell_control);
-		cc &= ~CTRL_CLOCK_CLOCK_1_ENABLE;
-		cc |= enable * CTRL_CLOCK_CLOCK_1_ENABLE;
-		out_le32(&c->controlregs->cell_control, cc);
+		if (enable)
+			MACIO_BIS(KEYLARGO_FCR1, KL1_I2S1_CLK_ENABLE_BIT);
+		else
+			MACIO_BIC(KEYLARGO_FCR1, KL1_I2S1_CLK_ENABLE_BIT);
 		break;
 	default:
 		return -ENODEV;
diff -urN linux-2.6.18-rc1/sound/aoa/soundbus/i2sbus/i2sbus-control.h linux-2.6.18-rc2/sound/aoa/soundbus/i2sbus/i2sbus-control.h
--- linux-2.6.18-rc1/sound/aoa/soundbus/i2sbus/i2sbus-control.h	2006-07-15 22:34:44.045156813 +0000
+++ linux-2.6.18-rc2/sound/aoa/soundbus/i2sbus/i2sbus-control.h	1970-01-01 00:00:00.000000000 +0000
@@ -1,37 +0,0 @@
-/*
- * i2sbus driver -- bus register definitions
- *
- * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
- *
- * GPL v2, can be found in COPYING.
- */
-#ifndef __I2SBUS_CONTROLREGS_H
-#define __I2SBUS_CONTROLREGS_H
-
-/* i2s control registers, at least what we know about them */
-
-#define __PAD(m,n) u8 __pad##m[n]
-#define _PAD(line, n) __PAD(line, n)
-#define PAD(n) _PAD(__LINE__, (n))
-struct i2s_control_regs {
-	PAD(0x38);
-	__le32 fcr0;		/* 0x38 (unknown) */
-	__le32 cell_control;	/* 0x3c (fcr1) */
-	__le32 fcr2;		/* 0x40 (unknown) */
-	__le32 fcr3;		/* 0x44 (fcr3) */
-	__le32 clock_control;	/* 0x48 (unknown) */
-	PAD(4);
-	/* total size: 0x50 bytes */
-}  __attribute__((__packed__));
-
-#define CTRL_CLOCK_CELL_0_ENABLE	(1<<10)
-#define CTRL_CLOCK_CLOCK_0_ENABLE	(1<<12)
-#define CTRL_CLOCK_SWRESET_0		(1<<11)
-#define CTRL_CLOCK_INTF_0_ENABLE	(1<<13)
-
-#define CTRL_CLOCK_CELL_1_ENABLE	(1<<17)
-#define CTRL_CLOCK_CLOCK_1_ENABLE	(1<<18)
-#define CTRL_CLOCK_SWRESET_1		(1<<19)
-#define CTRL_CLOCK_INTF_1_ENABLE	(1<<20)
-
-#endif /* __I2SBUS_CONTROLREGS_H */
diff -urN linux-2.6.18-rc1/sound/aoa/soundbus/i2sbus/i2sbus-core.c linux-2.6.18-rc2/sound/aoa/soundbus/i2sbus/i2sbus-core.c
--- linux-2.6.18-rc1/sound/aoa/soundbus/i2sbus/i2sbus-core.c	2006-07-15 22:34:44.045156813 +0000
+++ linux-2.6.18-rc2/sound/aoa/soundbus/i2sbus/i2sbus-core.c	2006-07-15 22:34:49.377735654 +0000
@@ -7,13 +7,16 @@
  */
 
 #include <linux/module.h>
-#include <asm/macio.h>
-#include <asm/dbdma.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+
 #include <sound/driver.h>
 #include <sound/core.h>
-#include <linux/dma-mapping.h>
+
+#include <asm/macio.h>
+#include <asm/dbdma.h>
+
 #include "../soundbus.h"
 #include "i2sbus.h"
 
@@ -24,6 +27,11 @@
  * string that macio puts into the relevant device */
 MODULE_ALIAS("of:Ni2sTi2sC");
 
+static int force;
+module_param(force, int, 0444);
+MODULE_PARM_DESC(force, "Force loading i2sbus even when"
+			" no layout-id property is present");
+
 static struct of_device_id i2sbus_match[] = {
 	{ .name = "i2s" },
 	{ }
@@ -73,12 +81,12 @@
  	if (i2sdev->intfregs) iounmap(i2sdev->intfregs);
  	if (i2sdev->out.dbdma) iounmap(i2sdev->out.dbdma);
  	if (i2sdev->in.dbdma) iounmap(i2sdev->in.dbdma);
-	for (i=0;i<3;i++)
+	for (i = aoa_resource_i2smmio; i <= aoa_resource_rxdbdma; i++)
 		if (i2sdev->allocated_resource[i])
 			release_and_free_resource(i2sdev->allocated_resource[i]);
 	free_dbdma_descriptor_ring(i2sdev, &i2sdev->out.dbdma_ring);
 	free_dbdma_descriptor_ring(i2sdev, &i2sdev->in.dbdma_ring);
-	for (i=0;i<3;i++)
+	for (i = aoa_resource_i2smmio; i <= aoa_resource_rxdbdma; i++)
 		free_irq(i2sdev->interrupts[i], i2sdev);
 	i2sbus_control_remove_dev(i2sdev->control, i2sdev);
 	mutex_destroy(&i2sdev->lock);
@@ -101,10 +109,49 @@
 	return IRQ_HANDLED;
 }
 
-static int force;
-module_param(force, int, 0444);
-MODULE_PARM_DESC(force, "Force loading i2sbus even when"
-			" no layout-id property is present");
+
+/*
+ * XXX FIXME: We test the layout_id's here to get the proper way of
+ * mapping in various registers, thanks to bugs in Apple device-trees.
+ * We could instead key off the machine model and the name of the i2s
+ * node (i2s-a). This we'll do when we move it all to macio_asic.c
+ * and have that export items for each sub-node too.
+ */
+static int i2sbus_get_and_fixup_rsrc(struct device_node *np, int index,
+				     int layout, struct resource *res)
+{
+	struct device_node *parent;
+	int pindex, rc = -ENXIO;
+	u32 *reg;
+
+	/* Machines with layout 76 and 36 (K2 based) have a weird device
+	 * tree what we need to special case.
+	 * Normal machines just fetch the resource from the i2s-X node.
+	 * Darwin further divides normal machines into old and new layouts
+	 * with a subtely different code path but that doesn't seem necessary
+	 * in practice, they just bloated it. In addition, even on our K2
+	 * case the i2s-modem node, if we ever want to handle it, uses the
+	 * normal layout
+	 */
+	if (layout != 76 && layout != 36)
+		return of_address_to_resource(np, index, res);
+
+	parent = of_get_parent(np);
+	pindex = (index == aoa_resource_i2smmio) ? 0 : 1;
+	rc = of_address_to_resource(parent, pindex, res);
+	if (rc)
+		goto bail;
+	reg = (u32 *)get_property(np, "reg", NULL);
+	if (reg == NULL) {
+		rc = -ENXIO;
+		goto bail;
+	}
+	res->start += reg[index * 2];
+	res->end = res->start + reg[index * 2 + 1] - 1;
+ bail:
+	of_node_put(parent);
+	return rc;
+}
 
 /* FIXME: look at device node refcounting */
 static int i2sbus_add_dev(struct macio_dev *macio,
@@ -113,7 +160,8 @@
 {
 	struct i2sbus_dev *dev;
 	struct device_node *child = NULL, *sound = NULL;
-	int i;
+	struct resource *r;
+	int i, layout = 0, rlen;
 	static const char *rnames[] = { "i2sbus: %s (control)",
 					"i2sbus: %s (tx)",
 					"i2sbus: %s (rx)" };
@@ -129,9 +177,6 @@
 	if (strncmp(np->name, "i2s-", 4))
 		return 0;
 
-	if (macio_irq_count(macio) != 3)
-		return 0;
-
 	dev = kzalloc(sizeof(struct i2sbus_dev), GFP_KERNEL);
 	if (!dev)
 		return 0;
@@ -147,8 +192,9 @@
 		u32 *layout_id;
 		layout_id = (u32*) get_property(sound, "layout-id", NULL);
 		if (layout_id) {
+			layout = *layout_id;
 			snprintf(dev->sound.modalias, 32,
-				 "sound-layout-%d", *layout_id);
+				 "sound-layout-%d", layout);
 			force = 1;
 		}
 	}
@@ -178,23 +224,32 @@
 	dev->bus_number = np->name[4] - 'a';
 	INIT_LIST_HEAD(&dev->sound.codec_list);
 
-	for (i=0;i<3;i++) {
+	for (i = aoa_resource_i2smmio; i <= aoa_resource_rxdbdma; i++) {
 		dev->interrupts[i] = -1;
-		snprintf(dev->rnames[i], sizeof(dev->rnames[i]), rnames[i], np->name);
+		snprintf(dev->rnames[i], sizeof(dev->rnames[i]),
+			 rnames[i], np->name);
 	}
-	for (i=0;i<3;i++) {
-		if (request_irq(macio_irq(macio, i), ints[i], 0,
-				dev->rnames[i], dev))
+	for (i = aoa_resource_i2smmio; i <= aoa_resource_rxdbdma; i++) {
+		int irq = irq_of_parse_and_map(np, i);
+		if (request_irq(irq, ints[i], 0, dev->rnames[i], dev))
 			goto err;
-		dev->interrupts[i] = macio_irq(macio, i);
+		dev->interrupts[i] = irq;
 	}
 
-	for (i=0;i<3;i++) {
-		if (of_address_to_resource(np, i, &dev->resources[i]))
+
+	/* Resource handling is problematic as some device-trees contain
+	 * useless crap (ugh ugh ugh). We work around that here by calling
+	 * specific functions for calculating the appropriate resources.
+	 *
+	 * This will all be moved to macio_asic.c at one point
+	 */
+	for (i = aoa_resource_i2smmio; i <= aoa_resource_rxdbdma; i++) {
+		if (i2sbus_get_and_fixup_rsrc(np,i,layout,&dev->resources[i]))
 			goto err;
-		/* if only we could use our resource dev->resources[i]...
+		/* If only we could use our resource dev->resources[i]...
 		 * but request_resource doesn't know about parents and
-		 * contained resources... */
+		 * contained resources...
+		 */
 		dev->allocated_resource[i] = 
 			request_mem_region(dev->resources[i].start,
 					   dev->resources[i].end -
@@ -205,13 +260,25 @@
 			goto err;
 		}
 	}
-	/* should do sanity checking here about length of them */
-	dev->intfregs = ioremap(dev->resources[0].start,
-				dev->resources[0].end-dev->resources[0].start+1);
-	dev->out.dbdma = ioremap(dev->resources[1].start,
-			 	 dev->resources[1].end-dev->resources[1].start+1);
-	dev->in.dbdma = ioremap(dev->resources[2].start,
-				dev->resources[2].end-dev->resources[2].start+1);
+
+	r = &dev->resources[aoa_resource_i2smmio];
+	rlen = r->end - r->start + 1;
+	if (rlen < sizeof(struct i2s_interface_regs))
+		goto err;
+	dev->intfregs = ioremap(r->start, rlen);
+
+	r = &dev->resources[aoa_resource_txdbdma];
+	rlen = r->end - r->start + 1;
+	if (rlen < sizeof(struct dbdma_regs))
+		goto err;
+	dev->out.dbdma = ioremap(r->start, rlen);
+
+	r = &dev->resources[aoa_resource_rxdbdma];
+	rlen = r->end - r->start + 1;
+	if (rlen < sizeof(struct dbdma_regs))
+		goto err;
+	dev->in.dbdma = ioremap(r->start, rlen);
+
 	if (!dev->intfregs || !dev->out.dbdma || !dev->in.dbdma)
 		goto err;
 
diff -urN linux-2.6.18-rc1/sound/aoa/soundbus/i2sbus/i2sbus.h linux-2.6.18-rc2/sound/aoa/soundbus/i2sbus/i2sbus.h
--- linux-2.6.18-rc1/sound/aoa/soundbus/i2sbus/i2sbus.h	2006-07-15 22:34:44.045156813 +0000
+++ linux-2.6.18-rc2/sound/aoa/soundbus/i2sbus/i2sbus.h	2006-07-15 22:34:49.377735654 +0000
@@ -7,20 +7,22 @@
  */
 #ifndef __I2SBUS_H
 #define __I2SBUS_H
-#include <asm/dbdma.h>
 #include <linux/interrupt.h>
-#include <sound/pcm.h>
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
+
+#include <sound/pcm.h>
+
 #include <asm/prom.h>
+#include <asm/pmac_feature.h>
+#include <asm/dbdma.h>
+
 #include "i2sbus-interface.h"
-#include "i2sbus-control.h"
 #include "../soundbus.h"
 
 struct i2sbus_control {
-	volatile struct i2s_control_regs __iomem *controlregs;
-	struct resource rsrc;
 	struct list_head list;
+	struct macio_chip *macio;
 };
 
 #define MAX_DBDMA_COMMANDS	32
@@ -45,6 +47,12 @@
 	volatile struct dbdma_regs __iomem *dbdma;
 };
 
+enum {
+	aoa_resource_i2smmio = 0,
+	aoa_resource_txdbdma,
+	aoa_resource_rxdbdma,
+};
+
 struct i2sbus_dev {
 	struct soundbus_dev sound;
 	struct macio_dev *macio;
diff -urN linux-2.6.18-rc1/sound/core/sound.c linux-2.6.18-rc2/sound/core/sound.c
--- linux-2.6.18-rc1/sound/core/sound.c	2006-07-15 22:34:44.061158550 +0000
+++ linux-2.6.18-rc2/sound/core/sound.c	2006-07-15 22:34:49.393737391 +0000
@@ -244,7 +244,7 @@
 	struct device *device = NULL;
 
 	snd_assert(name, return -EINVAL);
-	preg = kmalloc(sizeof(struct snd_minor) + strlen(name) + 1, GFP_KERNEL);
+	preg = kmalloc(sizeof *preg, GFP_KERNEL);
 	if (preg == NULL)
 		return -ENOMEM;
 	preg->type = type;
@@ -252,7 +252,6 @@
 	preg->device = dev;
 	preg->f_ops = f_ops;
 	preg->private_data = private_data;
-	strcpy(preg->name, name);
 	mutex_lock(&sound_mutex);
 #ifdef CONFIG_SND_DYNAMIC_MINORS
 	minor = snd_find_free_minor();
diff -urN linux-2.6.18-rc1/sound/core/timer.c linux-2.6.18-rc2/sound/core/timer.c
--- linux-2.6.18-rc1/sound/core/timer.c	2006-07-15 22:34:44.061158550 +0000
+++ linux-2.6.18-rc2/sound/core/timer.c	2006-07-15 22:34:49.393737391 +0000
@@ -628,8 +628,9 @@
 	struct snd_timer_instance *ti;
 	struct list_head *p;
 	unsigned long resolution, ticks;
+	unsigned long flags;
 
-	spin_lock(&timer->lock);
+	spin_lock_irqsave(&timer->lock, flags);
 	/* now process all callbacks */
 	while (!list_empty(&timer->sack_list_head)) {
 		p = timer->sack_list_head.next;		/* get first item */
@@ -649,7 +650,7 @@
 		spin_lock(&timer->lock);
 		ti->flags &= ~SNDRV_TIMER_IFLG_CALLBACK;
 	}
-	spin_unlock(&timer->lock);
+	spin_unlock_irqrestore(&timer->lock, flags);
 }
 
 /*
diff -urN linux-2.6.18-rc1/sound/i2c/cs8427.c linux-2.6.18-rc2/sound/i2c/cs8427.c
--- linux-2.6.18-rc1/sound/i2c/cs8427.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/sound/i2c/cs8427.c	2006-07-15 22:34:49.397737826 +0000
@@ -76,23 +76,28 @@
 	buf[0] = reg & 0x7f;
 	buf[1] = val;
 	if ((err = snd_i2c_sendbytes(device, buf, 2)) != 2) {
-		snd_printk(KERN_ERR "unable to send bytes 0x%02x:0x%02x to CS8427 (%i)\n", buf[0], buf[1], err);
+		snd_printk(KERN_ERR "unable to send bytes 0x%02x:0x%02x "
+			   "to CS8427 (%i)\n", buf[0], buf[1], err);
 		return err < 0 ? err : -EIO;
 	}
 	return 0;
 }
 
+EXPORT_SYMBOL(snd_cs8427_reg_write);
+
 static int snd_cs8427_reg_read(struct snd_i2c_device *device, unsigned char reg)
 {
 	int err;
 	unsigned char buf;
 
 	if ((err = snd_i2c_sendbytes(device, &reg, 1)) != 1) {
-		snd_printk(KERN_ERR "unable to send register 0x%x byte to CS8427\n", reg);
+		snd_printk(KERN_ERR "unable to send register 0x%x byte "
+			   "to CS8427\n", reg);
 		return err < 0 ? err : -EIO;
 	}
 	if ((err = snd_i2c_readbytes(device, &buf, 1)) != 1) {
-		snd_printk(KERN_ERR "unable to read register 0x%x byte from CS8427\n", reg);
+		snd_printk(KERN_ERR "unable to read register 0x%x byte "
+			   "from CS8427\n", reg);
 		return err < 0 ? err : -EIO;
 	}
 	return buf;
@@ -121,7 +126,8 @@
 				    int count)
 {
 	struct cs8427 *chip = device->private_data;
-	char *hw_data = udata ? chip->playback.hw_udata : chip->playback.hw_status;
+	char *hw_data = udata ?
+		chip->playback.hw_udata : chip->playback.hw_status;
 	char data[32];
 	int err, idx;
 
@@ -134,11 +140,11 @@
 		memset(data, 0, sizeof(data));
 		if (memcmp(hw_data, data, count) == 0) {
 			chip->regmap[CS8427_REG_UDATABUF] &= ~CS8427_UBMMASK;
-			chip->regmap[CS8427_REG_UDATABUF] |= CS8427_UBMZEROS | CS8427_EFTUI;
-			if ((err = snd_cs8427_reg_write(device, CS8427_REG_UDATABUF,
-							chip->regmap[CS8427_REG_UDATABUF])) < 0)
-				return err;
-			return 0;
+			chip->regmap[CS8427_REG_UDATABUF] |= CS8427_UBMZEROS |
+				CS8427_EFTUI;
+			err = snd_cs8427_reg_write(device, CS8427_REG_UDATABUF,
+						   chip->regmap[CS8427_REG_UDATABUF]);
+			return err < 0 ? err : 0;
 		}
 	}
 	data[0] = CS8427_REG_AUTOINC | CS8427_REG_CORU_DATABUF;
@@ -161,24 +167,32 @@
 {
 	static unsigned char initvals1[] = {
 	  CS8427_REG_CONTROL1 | CS8427_REG_AUTOINC,
-	  /* CS8427_REG_CONTROL1: RMCK to OMCK, valid PCM audio, disable mutes, TCBL=output */
+	  /* CS8427_REG_CONTROL1: RMCK to OMCK, valid PCM audio, disable mutes,
+	     TCBL=output */
 	  CS8427_SWCLK | CS8427_TCBLDIR,
-	  /* CS8427_REG_CONTROL2: hold last valid audio sample, RMCK=256*Fs, normal stereo operation */
+	  /* CS8427_REG_CONTROL2: hold last valid audio sample, RMCK=256*Fs,
+	     normal stereo operation */
 	  0x00,
-	  /* CS8427_REG_DATAFLOW: output drivers normal operation, Tx<=serial, Rx=>serial */
+	  /* CS8427_REG_DATAFLOW: output drivers normal operation, Tx<=serial,
+	     Rx=>serial */
 	  CS8427_TXDSERIAL | CS8427_SPDAES3RECEIVER,
-	  /* CS8427_REG_CLOCKSOURCE: Run off, CMCK=256*Fs, output time base = OMCK, input time base =
-	     recovered input clock, recovered input clock source is ILRCK changed to AES3INPUT (workaround, see snd_cs8427_reset) */
+	  /* CS8427_REG_CLOCKSOURCE: Run off, CMCK=256*Fs,
+	     output time base = OMCK, input time base = recovered input clock,
+	     recovered input clock source is ILRCK changed to AES3INPUT
+	     (workaround, see snd_cs8427_reset) */
 	  CS8427_RXDILRCK,
-	  /* CS8427_REG_SERIALINPUT: Serial audio input port data format = I2S, 24-bit, 64*Fsi */
+	  /* CS8427_REG_SERIALINPUT: Serial audio input port data format = I2S,
+	     24-bit, 64*Fsi */
 	  CS8427_SIDEL | CS8427_SILRPOL,
-	  /* CS8427_REG_SERIALOUTPUT: Serial audio output port data format = I2S, 24-bit, 64*Fsi */
+	  /* CS8427_REG_SERIALOUTPUT: Serial audio output port data format
+	     = I2S, 24-bit, 64*Fsi */
 	  CS8427_SODEL | CS8427_SOLRPOL,
 	};
 	static unsigned char initvals2[] = {
 	  CS8427_REG_RECVERRMASK | CS8427_REG_AUTOINC,
-	  /* CS8427_REG_RECVERRMASK: unmask the input PLL clock, V, confidence, biphase, parity status bits */
-	  /* CS8427_UNLOCK | CS8427_V | CS8427_CONF | CS8427_BIP | CS8427_PAR, */
+	  /* CS8427_REG_RECVERRMASK: unmask the input PLL clock, V, confidence,
+	     biphase, parity status bits */
+	  /* CS8427_UNLOCK | CS8427_V | CS8427_CONF | CS8427_BIP | CS8427_PAR,*/
 	  0xff, /* set everything */
 	  /* CS8427_REG_CSDATABUF:
 	     Registers 32-55 window to CS buffer
@@ -201,7 +215,8 @@
 	struct snd_i2c_device *device;
 	unsigned char buf[24];
 
-	if ((err = snd_i2c_device_create(bus, "CS8427", CS8427_ADDR | (addr & 7),
+	if ((err = snd_i2c_device_create(bus, "CS8427",
+					 CS8427_ADDR | (addr & 7),
 					 &device)) < 0)
 		return err;
 	chip = device->private_data = kzalloc(sizeof(*chip), GFP_KERNEL);
@@ -212,8 +227,8 @@
 	device->private_free = snd_cs8427_free;
 	
 	snd_i2c_lock(bus);
-	if ((err = snd_cs8427_reg_read(device, CS8427_REG_ID_AND_VER)) !=
-	    CS8427_VER8427A) {
+	err = snd_cs8427_reg_read(device, CS8427_REG_ID_AND_VER);
+	if (err != CS8427_VER8427A) {
 		snd_i2c_unlock(bus);
 		snd_printk(KERN_ERR "unable to find CS8427 signature "
 			   "(expected 0x%x, read 0x%x),\n",
@@ -222,7 +237,8 @@
 		return -EFAULT;
 	}
 	/* turn off run bit while making changes to configuration */
-	if ((err = snd_cs8427_reg_write(device, CS8427_REG_CLOCKSOURCE, 0x00)) < 0)
+	err = snd_cs8427_reg_write(device, CS8427_REG_CLOCKSOURCE, 0x00);
+	if (err < 0)
 		goto __fail;
 	/* send initial values */
 	memcpy(chip->regmap + (initvals1[0] & 0x7f), initvals1 + 1, 6);
@@ -282,6 +298,8 @@
       	return err < 0 ? err : -EIO;
 }
 
+EXPORT_SYMBOL(snd_cs8427_create);
+
 /*
  * Reset the chip using run bit, also lock PLL using ILRCK and
  * put back AES3INPUT. This workaround is described in latest
@@ -296,7 +314,8 @@
 	snd_assert(cs8427, return);
 	chip = cs8427->private_data;
 	snd_i2c_lock(cs8427->bus);
-	if ((chip->regmap[CS8427_REG_CLOCKSOURCE] & CS8427_RXDAES3INPUT) == CS8427_RXDAES3INPUT)  /* AES3 bit is set */
+	if ((chip->regmap[CS8427_REG_CLOCKSOURCE] & CS8427_RXDAES3INPUT) ==
+	    CS8427_RXDAES3INPUT)  /* AES3 bit is set */
 		aes3input = 1;
 	chip->regmap[CS8427_REG_CLOCKSOURCE] &= ~(CS8427_RUN | CS8427_RXDMASK);
 	snd_cs8427_reg_write(cs8427, CS8427_REG_CLOCKSOURCE,
@@ -367,12 +386,15 @@
 
 	snd_i2c_lock(device->bus);
 	if ((err = snd_i2c_sendbytes(device, &reg, 1)) != 1) {
-		snd_printk(KERN_ERR "unable to send register 0x%x byte to CS8427\n", reg);
+		snd_printk(KERN_ERR "unable to send register 0x%x byte "
+			   "to CS8427\n", reg);
 		snd_i2c_unlock(device->bus);
 		return err < 0 ? err : -EIO;
 	}
-	if ((err = snd_i2c_readbytes(device, ucontrol->value.bytes.data, 10)) != 10) {
-		snd_printk(KERN_ERR "unable to read Q-subcode bytes from CS8427\n");
+	err = snd_i2c_readbytes(device, ucontrol->value.bytes.data, 10);
+	if (err != 10) {
+		snd_printk(KERN_ERR "unable to read Q-subcode bytes "
+			   "from CS8427\n");
 		snd_i2c_unlock(device->bus);
 		return err < 0 ? err : -EIO;
 	}
@@ -380,7 +402,8 @@
 	return 0;
 }
 
-static int snd_cs8427_spdif_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
+static int snd_cs8427_spdif_info(struct snd_kcontrol *kcontrol,
+				 struct snd_ctl_elem_info *uinfo)
 {
 	uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
 	uinfo->count = 1;
@@ -413,7 +436,8 @@
 	snd_i2c_lock(device->bus);
 	change = memcmp(ucontrol->value.iec958.status, status, 24) != 0;
 	memcpy(status, ucontrol->value.iec958.status, 24);
-	if (change && (kcontrol->private_value ? runtime != NULL : runtime == NULL)) {
+	if (change && (kcontrol->private_value ?
+		       runtime != NULL : runtime == NULL)) {
 		err = snd_cs8427_send_corudata(device, 0, status, 24);
 		if (err < 0)
 			change = err;
@@ -442,7 +466,8 @@
 	.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
 	.info =		snd_cs8427_in_status_info,
 	.name =		"IEC958 CS8427 Input Status",
-	.access =	SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+	.access =	(SNDRV_CTL_ELEM_ACCESS_READ |
+			 SNDRV_CTL_ELEM_ACCESS_VOLATILE),
 	.get =		snd_cs8427_in_status_get,
 	.private_value = 15,
 },
@@ -450,7 +475,8 @@
 	.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
 	.info =		snd_cs8427_in_status_info,
 	.name =		"IEC958 CS8427 Error Status",
-	.access =	SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+	.access =	(SNDRV_CTL_ELEM_ACCESS_READ |
+			 SNDRV_CTL_ELEM_ACCESS_VOLATILE),
 	.get =		snd_cs8427_in_status_get,
 	.private_value = 16,
 },
@@ -470,7 +496,8 @@
 	.private_value = 0
 },
 {
-	.access =	SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_INACTIVE,
+	.access =	(SNDRV_CTL_ELEM_ACCESS_READWRITE |
+			 SNDRV_CTL_ELEM_ACCESS_INACTIVE),
 	.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
 	.name =		SNDRV_CTL_NAME_IEC958("",PLAYBACK,PCM_STREAM),
 	.info =		snd_cs8427_spdif_info,
@@ -482,7 +509,8 @@
 	.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
 	.info =		snd_cs8427_qsubcode_info,
 	.name =		"IEC958 Q-subcode Capture Default",
-	.access =	SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+	.access =	(SNDRV_CTL_ELEM_ACCESS_READ |
+			 SNDRV_CTL_ELEM_ACCESS_VOLATILE),
 	.get =		snd_cs8427_qsubcode_get
 }};
 
@@ -505,7 +533,8 @@
 		err = snd_ctl_add(cs8427->bus->card, kctl);
 		if (err < 0)
 			return err;
-		if (!strcmp(kctl->id.name, SNDRV_CTL_NAME_IEC958("",PLAYBACK,PCM_STREAM)))
+		if (! strcmp(kctl->id.name,
+			     SNDRV_CTL_NAME_IEC958("",PLAYBACK,PCM_STREAM)))
 			chip->playback.pcm_ctl = kctl;
 	}
 
@@ -515,6 +544,8 @@
 	return 0;
 }
 
+EXPORT_SYMBOL(snd_cs8427_iec958_build);
+
 int snd_cs8427_iec958_active(struct snd_i2c_device *cs8427, int active)
 {
 	struct cs8427 *chip;
@@ -522,13 +553,17 @@
 	snd_assert(cs8427, return -ENXIO);
 	chip = cs8427->private_data;
 	if (active)
-		memcpy(chip->playback.pcm_status, chip->playback.def_status, 24);
+		memcpy(chip->playback.pcm_status,
+		       chip->playback.def_status, 24);
 	chip->playback.pcm_ctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_INACTIVE;
-	snd_ctl_notify(cs8427->bus->card, SNDRV_CTL_EVENT_MASK_VALUE |
-					  SNDRV_CTL_EVENT_MASK_INFO, &chip->playback.pcm_ctl->id);
+	snd_ctl_notify(cs8427->bus->card,
+		       SNDRV_CTL_EVENT_MASK_VALUE | SNDRV_CTL_EVENT_MASK_INFO,
+		       &chip->playback.pcm_ctl->id);
 	return 0;
 }
 
+EXPORT_SYMBOL(snd_cs8427_iec958_active);
+
 int snd_cs8427_iec958_pcm(struct snd_i2c_device *cs8427, unsigned int rate)
 {
 	struct cs8427 *chip;
@@ -568,6 +603,8 @@
 	return err < 0 ? err : 0;
 }
 
+EXPORT_SYMBOL(snd_cs8427_iec958_pcm);
+
 static int __init alsa_cs8427_module_init(void)
 {
 	return 0;
@@ -579,10 +616,3 @@
 
 module_init(alsa_cs8427_module_init)
 module_exit(alsa_cs8427_module_exit)
-
-EXPORT_SYMBOL(snd_cs8427_create);
-EXPORT_SYMBOL(snd_cs8427_reset);
-EXPORT_SYMBOL(snd_cs8427_reg_write);
-EXPORT_SYMBOL(snd_cs8427_iec958_build);
-EXPORT_SYMBOL(snd_cs8427_iec958_active);
-EXPORT_SYMBOL(snd_cs8427_iec958_pcm);
diff -urN linux-2.6.18-rc1/sound/isa/cs423x/Makefile linux-2.6.18-rc2/sound/isa/cs423x/Makefile
--- linux-2.6.18-rc1/sound/isa/cs423x/Makefile	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/sound/isa/cs423x/Makefile	2006-07-15 22:34:49.401738260 +0000
@@ -11,6 +11,7 @@
 
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_AZT2320) += snd-cs4231-lib.o
+obj-$(CONFIG_SND_MIRO) += snd-cs4231-lib.o
 obj-$(CONFIG_SND_OPL3SA2) += snd-cs4231-lib.o
 obj-$(CONFIG_SND_CS4231) += snd-cs4231.o snd-cs4231-lib.o
 obj-$(CONFIG_SND_CS4232) += snd-cs4232.o snd-cs4231-lib.o
diff -urN linux-2.6.18-rc1/sound/isa/gus/gusextreme.c linux-2.6.18-rc2/sound/isa/gus/gusextreme.c
--- linux-2.6.18-rc1/sound/isa/gus/gusextreme.c	2006-07-15 22:34:44.073159853 +0000
+++ linux-2.6.18-rc2/sound/isa/gus/gusextreme.c	2006-07-15 22:34:49.405738694 +0000
@@ -87,7 +87,7 @@
 module_param_array(pcm_channels, int, NULL, 0444);
 MODULE_PARM_DESC(pcm_channels, "Reserved PCM channels for GUS Extreme driver.");
 
-struct platform_device *devices[SNDRV_CARDS];
+static struct platform_device *devices[SNDRV_CARDS];
 
 
 #define PFX	"gusextreme: "
diff -urN linux-2.6.18-rc1/sound/isa/wavefront/wavefront_fx.c linux-2.6.18-rc2/sound/isa/wavefront/wavefront_fx.c
--- linux-2.6.18-rc1/sound/isa/wavefront/wavefront_fx.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/sound/isa/wavefront/wavefront_fx.c	2006-07-15 22:34:49.409739128 +0000
@@ -34,7 +34,7 @@
 
 /* weird stuff, derived from port I/O tracing with dosemu */
 
-static unsigned char page_zero[] __initdata = {
+static unsigned char page_zero[] __devinitdata = {
 0x01, 0x7c, 0x00, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf5, 0x00,
 0x11, 0x00, 0x20, 0x00, 0x32, 0x00, 0x40, 0x00, 0x13, 0x00, 0x00,
 0x00, 0x14, 0x02, 0x76, 0x00, 0x60, 0x00, 0x80, 0x02, 0x00, 0x00,
@@ -61,7 +61,7 @@
 0x1d, 0x02, 0xdf
 };
 
-static unsigned char page_one[] __initdata = {
+static unsigned char page_one[] __devinitdata = {
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x19, 0x00,
 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0xd8, 0x00, 0x00,
 0x02, 0x20, 0x00, 0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x01,
@@ -88,7 +88,7 @@
 0x60, 0x00, 0x1b
 };
 
-static unsigned char page_two[] __initdata = {
+static unsigned char page_two[] __devinitdata = {
 0xc4, 0x00, 0x44, 0x07, 0x44, 0x00, 0x40, 0x25, 0x01, 0x06, 0xc4,
 0x07, 0x40, 0x25, 0x01, 0x00, 0x46, 0x46, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
@@ -103,7 +103,7 @@
 0x46, 0x05, 0x46, 0x07, 0x46, 0x07, 0x44
 };
 
-static unsigned char page_three[] __initdata = {
+static unsigned char page_three[] __devinitdata = {
 0x07, 0x40, 0x00, 0x00, 0x00, 0x47, 0x00, 0x40, 0x00, 0x40, 0x06,
 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
@@ -118,7 +118,7 @@
 0x02, 0x00, 0x42, 0x00, 0xc0, 0x00, 0x40
 };
 
-static unsigned char page_four[] __initdata = {
+static unsigned char page_four[] __devinitdata = {
 0x63, 0x03, 0x26, 0x02, 0x2c, 0x00, 0x24, 0x00, 0x2e, 0x02, 0x02,
 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
@@ -133,7 +133,7 @@
 0x02, 0x62, 0x02, 0x20, 0x01, 0x21, 0x01
 };
 
-static unsigned char page_six[] __initdata = {
+static unsigned char page_six[] __devinitdata = {
 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x04, 0x00, 0x00, 0x06, 0x00,
 0x00, 0x08, 0x00, 0x00, 0x0a, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x0e,
 0x00, 0x00, 0x10, 0x00, 0x00, 0x12, 0x00, 0x00, 0x14, 0x00, 0x00,
@@ -154,7 +154,7 @@
 0x80, 0x00, 0x7e, 0x80, 0x80
 };
 
-static unsigned char page_seven[] __initdata = {
+static unsigned char page_seven[] __devinitdata = {
 0x0f, 0xff, 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, 0x02, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x0f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00,
 0x08, 0x00, 0x00, 0x00, 0x0f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x0f,
@@ -181,7 +181,7 @@
 0x00, 0x02, 0x00
 };
 
-static unsigned char page_zero_v2[] __initdata = {
+static unsigned char page_zero_v2[] __devinitdata = {
 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
@@ -193,7 +193,7 @@
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 };
 
-static unsigned char page_one_v2[] __initdata = {
+static unsigned char page_one_v2[] __devinitdata = {
 0x01, 0xc0, 0x01, 0xfa, 0x00, 0x1a, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
@@ -205,21 +205,21 @@
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 };
 
-static unsigned char page_two_v2[] __initdata = {
+static unsigned char page_two_v2[] __devinitdata = {
 0x46, 0x46, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00
 };
-static unsigned char page_three_v2[] __initdata = {
+static unsigned char page_three_v2[] __devinitdata = {
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00
 };
-static unsigned char page_four_v2[] __initdata = {
+static unsigned char page_four_v2[] __devinitdata = {
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
@@ -227,7 +227,7 @@
 0x00, 0x00, 0x00, 0x00
 };
 
-static unsigned char page_seven_v2[] __initdata = {
+static unsigned char page_seven_v2[] __devinitdata = {
 0x0f, 0xff, 0x0f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
@@ -239,7 +239,7 @@
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 };
 
-static unsigned char mod_v2[] __initdata = {
+static unsigned char mod_v2[] __devinitdata = {
 0x01, 0x00, 0x02, 0x00, 0x01, 0x01, 0x02, 0x00, 0x01, 0x02, 0x02,
 0x00, 0x01, 0x03, 0x02, 0x00, 0x01, 0x04, 0x02, 0x00, 0x01, 0x05,
 0x02, 0x00, 0x01, 0x06, 0x02, 0x00, 0x01, 0x07, 0x02, 0x00, 0xb0,
@@ -269,7 +269,7 @@
 0x02, 0x01, 0x01, 0x04, 0x02, 0x01, 0x01, 0x05, 0x02, 0x01, 0x01,
 0x06, 0x02, 0x01, 0x01, 0x07, 0x02, 0x01
 };
-static unsigned char coefficients[] __initdata = {
+static unsigned char coefficients[] __devinitdata = {
 0x07, 0x46, 0x00, 0x00, 0x07, 0x49, 0x00, 0x00, 0x00, 0x4b, 0x03,
 0x11, 0x00, 0x4d, 0x01, 0x32, 0x07, 0x46, 0x00, 0x00, 0x07, 0x49,
 0x00, 0x00, 0x07, 0x40, 0x00, 0x00, 0x07, 0x41, 0x00, 0x00, 0x01,
@@ -305,14 +305,14 @@
 0x06, 0x6c, 0x4c, 0x6c, 0x06, 0x50, 0x52, 0xe2, 0x06, 0x42, 0x02,
 0xba
 };
-static unsigned char coefficients2[] __initdata = {
+static unsigned char coefficients2[] __devinitdata = {
 0x07, 0x46, 0x00, 0x00, 0x07, 0x49, 0x00, 0x00, 0x07, 0x45, 0x0f,
 0xff, 0x07, 0x48, 0x0f, 0xff, 0x07, 0x7b, 0x04, 0xcc, 0x07, 0x7d,
 0x04, 0xcc, 0x07, 0x7c, 0x00, 0x00, 0x07, 0x7e, 0x00, 0x00, 0x07,
 0x46, 0x00, 0x00, 0x07, 0x49, 0x00, 0x00, 0x07, 0x47, 0x00, 0x00,
 0x07, 0x4a, 0x00, 0x00, 0x07, 0x4c, 0x00, 0x00, 0x07, 0x4e, 0x00, 0x00
 };
-static unsigned char coefficients3[] __initdata = {
+static unsigned char coefficients3[] __devinitdata = {
 0x00, 0x00, 0x00, 0x00, 0x00, 0x28, 0x00, 0x28, 0x00, 0x51, 0x00,
 0x51, 0x00, 0x7a, 0x00, 0x7a, 0x00, 0xa3, 0x00, 0xa3, 0x00, 0xcc,
 0x00, 0xcc, 0x00, 0xf5, 0x00, 0xf5, 0x01, 0x1e, 0x01, 0x1e, 0x01,
@@ -563,7 +563,7 @@
 */
 
 
-int __init
+int __devinit
 snd_wavefront_fx_start (snd_wavefront_t *dev)
 
 {
diff -urN linux-2.6.18-rc1/sound/isa/wavefront/wavefront_midi.c linux-2.6.18-rc2/sound/isa/wavefront/wavefront_midi.c
--- linux-2.6.18-rc1/sound/isa/wavefront/wavefront_midi.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/sound/isa/wavefront/wavefront_midi.c	2006-07-15 22:34:49.409739128 +0000
@@ -474,7 +474,7 @@
 	spin_unlock_irqrestore (&card->wavefront.midi.virtual, flags);
 }
 
-int __init
+int __devinit
 snd_wavefront_midi_start (snd_wavefront_card_t *card)
 
 {
diff -urN linux-2.6.18-rc1/sound/isa/wavefront/wavefront_synth.c linux-2.6.18-rc2/sound/isa/wavefront/wavefront_synth.c
--- linux-2.6.18-rc1/sound/isa/wavefront/wavefront_synth.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/sound/isa/wavefront/wavefront_synth.c	2006-07-15 22:34:49.413739562 +0000
@@ -1738,7 +1738,7 @@
 7 Unused
 */
 
-static int __init
+static int __devinit
 snd_wavefront_interrupt_bits (int irq)
 
 {
@@ -1766,7 +1766,7 @@
 	return bits;
 }
 
-static void __init
+static void __devinit
 wavefront_should_cause_interrupt (snd_wavefront_t *dev, 
 				  int val, int port, int timeout)
 
@@ -1787,7 +1787,7 @@
 	}
 }
 
-static int __init
+static int __devinit
 wavefront_reset_to_cleanliness (snd_wavefront_t *dev)
 
 {
@@ -1946,7 +1946,7 @@
 #include <asm/uaccess.h>
 
 
-static int __init
+static int __devinit
 wavefront_download_firmware (snd_wavefront_t *dev, char *path)
 
 {
@@ -2047,7 +2047,7 @@
 }
 
 
-static int __init
+static int __devinit
 wavefront_do_reset (snd_wavefront_t *dev)
 
 {
@@ -2136,7 +2136,7 @@
 	return 1;
 }
 
-int __init
+int __devinit
 snd_wavefront_start (snd_wavefront_t *dev)
 
 {
@@ -2178,7 +2178,7 @@
 	return (0);
 }
 
-int __init
+int __devinit
 snd_wavefront_detect (snd_wavefront_card_t *card)
 
 {
diff -urN linux-2.6.18-rc1/sound/pci/Kconfig linux-2.6.18-rc2/sound/pci/Kconfig
--- linux-2.6.18-rc1/sound/pci/Kconfig	2006-07-15 22:34:44.113164195 +0000
+++ linux-2.6.18-rc2/sound/pci/Kconfig	2006-07-15 22:34:49.449743471 +0000
@@ -460,17 +460,19 @@
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-fm801.
 
-config SND_FM801_TEA575X
-	tristate "ForteMedia FM801 + TEA5757 tuner"
+config SND_FM801_TEA575X_BOOL
+	bool "ForteMedia FM801 + TEA5757 tuner"
 	depends on SND_FM801
-        select VIDEO_DEV
 	help
 	  Say Y here to include support for soundcards based on the ForteMedia
 	  FM801 chip with a TEA5757 tuner connected to GPIO1-3 pins (Media
-	  Forte SF256-PCS-02).
+	  Forte SF256-PCS-02) into the snd-fm801 driver.
 
-	  To compile this driver as a module, choose M here: the module
-	  will be called snd-fm801-tea575x.
+config SND_FM801_TEA575X
+	tristate
+	depends on SND_FM801_TEA575X_BOOL
+	default SND_FM801
+	select VIDEO_DEV
 
 config SND_HDA_INTEL
 	tristate "Intel HD Audio"
diff -urN linux-2.6.18-rc1/sound/pci/ad1889.c linux-2.6.18-rc2/sound/pci/ad1889.c
--- linux-2.6.18-rc1/sound/pci/ad1889.c	2006-07-15 22:34:44.117164629 +0000
+++ linux-2.6.18-rc2/sound/pci/ad1889.c	2006-07-15 22:34:49.449743471 +0000
@@ -241,14 +241,14 @@
 	}
 }
 
-static inline u16
+static u16
 snd_ad1889_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
 {
 	struct snd_ad1889 *chip = ac97->private_data;
 	return ad1889_readw(chip, AD_AC97_BASE + reg);
 }
 
-static inline void
+static void
 snd_ad1889_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned short val)
 {
 	struct snd_ad1889 *chip = ac97->private_data;
@@ -873,7 +873,7 @@
 	return 0;
 }
 
-static inline int
+static int
 snd_ad1889_dev_free(struct snd_device *device) 
 {
 	struct snd_ad1889 *chip = device->device_data;
@@ -1051,7 +1051,7 @@
 	pci_set_drvdata(pci, NULL);
 }
 
-static struct pci_device_id snd_ad1889_ids[] __devinitdata = {
+static struct pci_device_id snd_ad1889_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ANALOG_DEVICES, PCI_DEVICE_ID_AD1889JS) },
 	{ 0, },
 };
diff -urN linux-2.6.18-rc1/sound/pci/ali5451/ali5451.c linux-2.6.18-rc2/sound/pci/ali5451/ali5451.c
--- linux-2.6.18-rc1/sound/pci/ali5451/ali5451.c	2006-07-15 22:34:44.117164629 +0000
+++ linux-2.6.18-rc2/sound/pci/ali5451/ali5451.c	2006-07-15 22:34:49.453743905 +0000
@@ -279,7 +279,7 @@
 #endif
 };
 
-static struct pci_device_id snd_ali_ids[] __devinitdata = {
+static struct pci_device_id snd_ali_ids[] = {
 	{PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5451), 0, 0, 0},
 	{0, }
 };
diff -urN linux-2.6.18-rc1/sound/pci/als300.c linux-2.6.18-rc2/sound/pci/als300.c
--- linux-2.6.18-rc1/sound/pci/als300.c	2006-07-15 22:34:44.121165063 +0000
+++ linux-2.6.18-rc2/sound/pci/als300.c	2006-07-15 22:34:49.453743905 +0000
@@ -146,7 +146,7 @@
 	int block_counter_register;
 };
 
-static struct pci_device_id snd_als300_ids[] __devinitdata = {
+static struct pci_device_id snd_als300_ids[] = {
 	{ 0x4005, 0x0300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_ALS300 },
 	{ 0x4005, 0x0308, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_ALS300_PLUS },
 	{ 0, }
diff -urN linux-2.6.18-rc1/sound/pci/als4000.c linux-2.6.18-rc2/sound/pci/als4000.c
--- linux-2.6.18-rc1/sound/pci/als4000.c	2006-07-15 22:34:44.121165063 +0000
+++ linux-2.6.18-rc2/sound/pci/als4000.c	2006-07-15 22:34:49.453743905 +0000
@@ -116,7 +116,7 @@
 #endif
 };
 
-static struct pci_device_id snd_als4000_ids[] __devinitdata = {
+static struct pci_device_id snd_als4000_ids[] = {
 	{ 0x4005, 0x4000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* ALS4000 */
 	{ 0, }
 };
diff -urN linux-2.6.18-rc1/sound/pci/atiixp.c linux-2.6.18-rc2/sound/pci/atiixp.c
--- linux-2.6.18-rc1/sound/pci/atiixp.c	2006-07-15 22:34:44.121165063 +0000
+++ linux-2.6.18-rc2/sound/pci/atiixp.c	2006-07-15 22:34:49.453743905 +0000
@@ -284,7 +284,7 @@
 
 /*
  */
-static struct pci_device_id snd_atiixp_ids[] __devinitdata = {
+static struct pci_device_id snd_atiixp_ids[] = {
 	{ 0x1002, 0x4341, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB200 */
 	{ 0x1002, 0x4361, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB300 */
 	{ 0x1002, 0x4370, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB400 */
diff -urN linux-2.6.18-rc1/sound/pci/atiixp_modem.c linux-2.6.18-rc2/sound/pci/atiixp_modem.c
--- linux-2.6.18-rc1/sound/pci/atiixp_modem.c	2006-07-15 22:34:44.121165063 +0000
+++ linux-2.6.18-rc2/sound/pci/atiixp_modem.c	2006-07-15 22:34:49.453743905 +0000
@@ -262,7 +262,7 @@
 
 /*
  */
-static struct pci_device_id snd_atiixp_ids[] __devinitdata = {
+static struct pci_device_id snd_atiixp_ids[] = {
 	{ 0x1002, 0x434d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB200 */
 	{ 0x1002, 0x4378, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB400 */
 	{ 0, }
diff -urN linux-2.6.18-rc1/sound/pci/au88x0/au8810.c linux-2.6.18-rc2/sound/pci/au88x0/au8810.c
--- linux-2.6.18-rc1/sound/pci/au88x0/au8810.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/sound/pci/au88x0/au8810.c	2006-07-15 22:34:49.453743905 +0000
@@ -1,6 +1,6 @@
 #include "au8810.h"
 #include "au88x0.h"
-static struct pci_device_id snd_vortex_ids[] __devinitdata = {
+static struct pci_device_id snd_vortex_ids[] = {
 	{PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_ADVANTAGE,
 	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1,},
 	{0,}
diff -urN linux-2.6.18-rc1/sound/pci/au88x0/au8820.c linux-2.6.18-rc2/sound/pci/au88x0/au8820.c
--- linux-2.6.18-rc1/sound/pci/au88x0/au8820.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/sound/pci/au88x0/au8820.c	2006-07-15 22:34:49.453743905 +0000
@@ -1,6 +1,6 @@
 #include "au8820.h"
 #include "au88x0.h"
-static struct pci_device_id snd_vortex_ids[] __devinitdata = {
+static struct pci_device_id snd_vortex_ids[] = {
 	{PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_1,
 	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
 	{0,}
diff -urN linux-2.6.18-rc1/sound/pci/au88x0/au8830.c linux-2.6.18-rc2/sound/pci/au88x0/au8830.c
--- linux-2.6.18-rc1/sound/pci/au88x0/au8830.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/sound/pci/au88x0/au8830.c	2006-07-15 22:34:49.453743905 +0000
@@ -1,6 +1,6 @@
 #include "au8830.h"
 #include "au88x0.h"
-static struct pci_device_id snd_vortex_ids[] __devinitdata = {
+static struct pci_device_id snd_vortex_ids[] = {
 	{PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_2,
 	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
 	{0,}
diff -urN linux-2.6.18-rc1/sound/pci/au88x0/au88x0.h linux-2.6.18-rc2/sound/pci/au88x0/au88x0.h
--- linux-2.6.18-rc1/sound/pci/au88x0/au88x0.h	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/sound/pci/au88x0/au88x0.h	2006-07-15 22:34:49.453743905 +0000
@@ -270,7 +270,8 @@
 
 /* A3D functions. */
 #ifndef CHIP_AU8820
-static void vortex_Vort3D(vortex_t * v, int en);
+static void vortex_Vort3D_enable(vortex_t * v);
+static void vortex_Vort3D_disable(vortex_t * v);
 static void vortex_Vort3D_connect(vortex_t * vortex, int en);
 static void vortex_Vort3D_InitializeSource(a3dsrc_t * a, int en);
 #endif
diff -urN linux-2.6.18-rc1/sound/pci/au88x0/au88x0_a3d.c linux-2.6.18-rc2/sound/pci/au88x0/au88x0_a3d.c
--- linux-2.6.18-rc1/sound/pci/au88x0/au88x0_a3d.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/sound/pci/au88x0/au88x0_a3d.c	2006-07-15 22:34:49.453743905 +0000
@@ -593,24 +593,23 @@
 static int vortex_a3d_register_controls(vortex_t * vortex);
 static void vortex_a3d_unregister_controls(vortex_t * vortex);
 /* A3D base support init/shudown */
-static void vortex_Vort3D(vortex_t * v, int en)
+static void __devinit vortex_Vort3D_enable(vortex_t * v)
 {
 	int i;
-	if (en) {
-		Vort3DRend_Initialize(v, XT_HEADPHONE);
-		for (i = 0; i < NR_A3D; i++) {
-			vortex_A3dSourceHw_Initialize(v, i % 4, i >> 2);
-			a3dsrc_ZeroStateA3D(&(v->a3d[0]));
-		}
-	} else {
-		vortex_XtalkHw_Disable(v);
+
+	Vort3DRend_Initialize(v, XT_HEADPHONE);
+	for (i = 0; i < NR_A3D; i++) {
+		vortex_A3dSourceHw_Initialize(v, i % 4, i >> 2);
+		a3dsrc_ZeroStateA3D(&(v->a3d[0]));
 	}
 	/* Register ALSA controls */
-	if (en) {
-		vortex_a3d_register_controls(v);
-	} else {
-		vortex_a3d_unregister_controls(v);
-	}
+	vortex_a3d_register_controls(v);
+}
+
+static void vortex_Vort3D_disable(vortex_t * v)
+{
+	vortex_XtalkHw_Disable(v);
+	vortex_a3d_unregister_controls(v);
 }
 
 /* Make A3D subsystem connections. */
@@ -855,7 +854,7 @@
 };
 
 /* Control (un)registration. */
-static int vortex_a3d_register_controls(vortex_t * vortex)
+static int __devinit vortex_a3d_register_controls(vortex_t * vortex)
 {
 	struct snd_kcontrol *kcontrol;
 	int err, i;
diff -urN linux-2.6.18-rc1/sound/pci/au88x0/au88x0_core.c linux-2.6.18-rc2/sound/pci/au88x0/au88x0_core.c
--- linux-2.6.18-rc1/sound/pci/au88x0/au88x0_core.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/sound/pci/au88x0/au88x0_core.c	2006-07-15 22:34:49.457744339 +0000
@@ -2690,7 +2690,7 @@
 #ifndef CHIP_AU8820
 	vortex_eq_init(vortex);
 	vortex_spdif_init(vortex, 48000, 1);
-	vortex_Vort3D(vortex, 1);
+	vortex_Vort3D_enable(vortex);
 #endif
 #ifndef CHIP_AU8810
 	vortex_wt_init(vortex);
@@ -2718,7 +2718,7 @@
 	printk(KERN_INFO "Vortex: shutdown...");
 #ifndef CHIP_AU8820
 	vortex_eq_free(vortex);
-	vortex_Vort3D(vortex, 0);
+	vortex_Vort3D_disable(vortex);
 #endif
 	//vortex_disable_timer_int(vortex);
 	vortex_disable_int(vortex);
diff -urN linux-2.6.18-rc1/sound/pci/azt3328.c linux-2.6.18-rc2/sound/pci/azt3328.c
--- linux-2.6.18-rc1/sound/pci/azt3328.c	2006-07-15 22:34:44.121165063 +0000
+++ linux-2.6.18-rc2/sound/pci/azt3328.c	2006-07-15 22:34:49.457744339 +0000
@@ -238,7 +238,7 @@
 #endif
 };
 
-static const struct pci_device_id snd_azf3328_ids[] __devinitdata = {
+static const struct pci_device_id snd_azf3328_ids[] = {
 	{ 0x122D, 0x50DC, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },   /* PCI168/3328 */
 	{ 0x122D, 0x80DA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },   /* 3328 */
 	{ 0, }
diff -urN linux-2.6.18-rc1/sound/pci/bt87x.c linux-2.6.18-rc2/sound/pci/bt87x.c
--- linux-2.6.18-rc1/sound/pci/bt87x.c	2006-07-15 22:34:44.125165498 +0000
+++ linux-2.6.18-rc2/sound/pci/bt87x.c	2006-07-15 22:34:49.457744339 +0000
@@ -774,7 +774,7 @@
 	  .driver_data = rate }
 
 /* driver_data is the default digital_rate value for that device */
-static struct pci_device_id snd_bt87x_ids[] __devinitdata = {
+static struct pci_device_id snd_bt87x_ids[] = {
 	/* Hauppauge WinTV series */
 	BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x0070, 0x13eb, 32000),
 	/* Hauppauge WinTV series */
diff -urN linux-2.6.18-rc1/sound/pci/ca0106/ca0106_main.c linux-2.6.18-rc2/sound/pci/ca0106/ca0106_main.c
--- linux-2.6.18-rc1/sound/pci/ca0106/ca0106_main.c	2006-07-15 22:34:44.125165498 +0000
+++ linux-2.6.18-rc2/sound/pci/ca0106/ca0106_main.c	2006-07-15 22:34:49.457744339 +0000
@@ -1602,7 +1602,7 @@
 }
 
 // PCI IDs
-static struct pci_device_id snd_ca0106_ids[] __devinitdata = {
+static struct pci_device_id snd_ca0106_ids[] = {
 	{ 0x1102, 0x0007, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },	/* Audigy LS or Live 24bit */
 	{ 0, }
 };
diff -urN linux-2.6.18-rc1/sound/pci/cmipci.c linux-2.6.18-rc2/sound/pci/cmipci.c
--- linux-2.6.18-rc1/sound/pci/cmipci.c	2006-07-15 22:34:44.125165498 +0000
+++ linux-2.6.18-rc2/sound/pci/cmipci.c	2006-07-15 22:34:49.461744773 +0000
@@ -2609,7 +2609,7 @@
 #endif
 
 
-static struct pci_device_id snd_cmipci_ids[] __devinitdata = {
+static struct pci_device_id snd_cmipci_ids[] = {
 	{PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8738, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
diff -urN linux-2.6.18-rc1/sound/pci/cs4281.c linux-2.6.18-rc2/sound/pci/cs4281.c
--- linux-2.6.18-rc1/sound/pci/cs4281.c	2006-07-15 22:34:44.125165498 +0000
+++ linux-2.6.18-rc2/sound/pci/cs4281.c	2006-07-15 22:34:49.461744773 +0000
@@ -494,7 +494,7 @@
 
 static irqreturn_t snd_cs4281_interrupt(int irq, void *dev_id, struct pt_regs *regs);
 
-static struct pci_device_id snd_cs4281_ids[] __devinitdata = {
+static struct pci_device_id snd_cs4281_ids[] = {
 	{ 0x1013, 0x6005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },	/* CS4281 */
 	{ 0, }
 };
diff -urN linux-2.6.18-rc1/sound/pci/cs46xx/cs46xx.c linux-2.6.18-rc2/sound/pci/cs46xx/cs46xx.c
--- linux-2.6.18-rc1/sound/pci/cs46xx/cs46xx.c	2006-07-15 22:34:44.129165932 +0000
+++ linux-2.6.18-rc2/sound/pci/cs46xx/cs46xx.c	2006-07-15 22:34:49.461744773 +0000
@@ -65,7 +65,7 @@
 module_param_array(mmap_valid, bool, NULL, 0444);
 MODULE_PARM_DESC(mmap_valid, "Support OSS mmap.");
 
-static struct pci_device_id snd_cs46xx_ids[] __devinitdata = {
+static struct pci_device_id snd_cs46xx_ids[] = {
         { 0x1013, 0x6001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* CS4280 */
         { 0x1013, 0x6003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* CS4612 */
         { 0x1013, 0x6004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* CS4615 */
diff -urN linux-2.6.18-rc1/sound/pci/cs46xx/cs46xx_lib.c linux-2.6.18-rc2/sound/pci/cs46xx/cs46xx_lib.c
--- linux-2.6.18-rc1/sound/pci/cs46xx/cs46xx_lib.c	2006-07-15 22:34:44.129165932 +0000
+++ linux-2.6.18-rc2/sound/pci/cs46xx/cs46xx_lib.c	2006-07-15 22:34:49.461744773 +0000
@@ -2317,7 +2317,7 @@
 
 #ifdef CONFIG_SND_CS46XX_NEW_DSP
 /* Only available on the Hercules Game Theater XP soundcard */
-static struct snd_kcontrol_new snd_hercules_controls[] __devinitdata = {
+static struct snd_kcontrol_new snd_hercules_controls[] = {
 {
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	.name = "Optical/Coaxial SPDIF Input Switch",
@@ -3458,6 +3458,9 @@
 	snd_printdd ("initializing Hercules mixer\n");
 
 #ifdef CONFIG_SND_CS46XX_NEW_DSP
+	if (chip->in_suspend)
+		return;
+
 	for (idx = 0 ; idx < ARRAY_SIZE(snd_hercules_controls); idx++) {
 		struct snd_kcontrol *kctl;
 
@@ -3669,6 +3672,7 @@
 	int amp_saved;
 
 	snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
+	chip->in_suspend = 1;
 	snd_pcm_suspend_all(chip->pcm);
 	// chip->ac97_powerdown = snd_cs46xx_codec_read(chip, AC97_POWER_CONTROL);
 	// chip->ac97_general_purpose = snd_cs46xx_codec_read(chip, BA0_AC97_GENERAL_PURPOSE);
@@ -3722,6 +3726,7 @@
 	else
 		chip->active_ctrl(chip, -1); /* disable CLKRUN */
 	chip->amplifier = amp_saved;
+	chip->in_suspend = 0;
 	snd_power_change_state(card, SNDRV_CTL_POWER_D0);
 	return 0;
 }
diff -urN linux-2.6.18-rc1/sound/pci/cs5535audio/cs5535audio.c linux-2.6.18-rc2/sound/pci/cs5535audio/cs5535audio.c
--- linux-2.6.18-rc1/sound/pci/cs5535audio/cs5535audio.c	2006-07-15 22:34:44.129165932 +0000
+++ linux-2.6.18-rc2/sound/pci/cs5535audio/cs5535audio.c	2006-07-15 22:34:49.465745208 +0000
@@ -67,7 +67,7 @@
 module_param_array(enable, bool, NULL, 0444);
 MODULE_PARM_DESC(enable, "Enable " DRIVER_NAME);
 
-static struct pci_device_id snd_cs5535audio_ids[] __devinitdata = {
+static struct pci_device_id snd_cs5535audio_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_AUDIO) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_AUDIO) },
 	{}
diff -urN linux-2.6.18-rc1/sound/pci/emu10k1/emu10k1.c linux-2.6.18-rc2/sound/pci/emu10k1/emu10k1.c
--- linux-2.6.18-rc1/sound/pci/emu10k1/emu10k1.c	2006-07-15 22:34:44.141167235 +0000
+++ linux-2.6.18-rc2/sound/pci/emu10k1/emu10k1.c	2006-07-15 22:34:49.477746510 +0000
@@ -77,7 +77,7 @@
 /*
  * Class 0401: 1102:0008 (rev 00) Subsystem: 1102:1001 -> Audigy2 Value  Model:SB0400
  */
-static struct pci_device_id snd_emu10k1_ids[] __devinitdata = {
+static struct pci_device_id snd_emu10k1_ids[] = {
 	{ 0x1102, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },	/* EMU10K1 */
 	{ 0x1102, 0x0004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },	/* Audigy */
 	{ 0x1102, 0x0008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },	/* Audigy 2 Value SB0400 */
diff -urN linux-2.6.18-rc1/sound/pci/emu10k1/emu10k1_main.c linux-2.6.18-rc2/sound/pci/emu10k1/emu10k1_main.c
--- linux-2.6.18-rc1/sound/pci/emu10k1/emu10k1_main.c	2006-07-15 22:34:44.141167235 +0000
+++ linux-2.6.18-rc2/sound/pci/emu10k1/emu10k1_main.c	2006-07-15 22:34:49.477746510 +0000
@@ -531,7 +531,7 @@
 	snd_emu10k1_ecard_write(emu, emu->ecard_ctrl);
 }
 
-static int __devinit snd_emu10k1_ecard_init(struct snd_emu10k1 * emu)
+static int snd_emu10k1_ecard_init(struct snd_emu10k1 * emu)
 {
 	unsigned int hc_value;
 
@@ -571,7 +571,7 @@
 	return 0;
 }
 
-static int __devinit snd_emu10k1_cardbus_init(struct snd_emu10k1 * emu)
+static int snd_emu10k1_cardbus_init(struct snd_emu10k1 * emu)
 {
 	unsigned long special_port;
 	unsigned int value;
@@ -633,7 +633,7 @@
 	return 0;
 }
 
-static int __devinit snd_emu10k1_emu1212m_init(struct snd_emu10k1 * emu)
+static int snd_emu10k1_emu1212m_init(struct snd_emu10k1 * emu)
 {
 	unsigned int i;
 	int tmp;
@@ -1430,6 +1430,10 @@
 {
 	if (emu->card_capabilities->ecard)
 		snd_emu10k1_ecard_init(emu);
+	else if (emu->card_capabilities->ca_cardbus_chip)
+		snd_emu10k1_cardbus_init(emu);
+	else if (emu->card_capabilities->emu1212m)
+ 		snd_emu10k1_emu1212m_init(emu);
 	else
 		snd_emu10k1_ptr_write(emu, AC97SLOT, 0, AC97SLOT_CNTR|AC97SLOT_LFE);
 	snd_emu10k1_init(emu, emu->enable_ir, 1);
diff -urN linux-2.6.18-rc1/sound/pci/emu10k1/emu10k1x.c linux-2.6.18-rc2/sound/pci/emu10k1/emu10k1x.c
--- linux-2.6.18-rc1/sound/pci/emu10k1/emu10k1x.c	2006-07-15 22:34:44.145167669 +0000
+++ linux-2.6.18-rc2/sound/pci/emu10k1/emu10k1x.c	2006-07-15 22:34:49.477746510 +0000
@@ -1286,7 +1286,7 @@
 	do_emu10k1x_midi_interrupt(emu, &emu->midi, status);
 }
 
-static void snd_emu10k1x_midi_cmd(struct emu10k1x * emu,
+static int snd_emu10k1x_midi_cmd(struct emu10k1x * emu,
 				  struct emu10k1x_midi *midi, unsigned char cmd, int ack)
 {
 	unsigned long flags;
@@ -1312,11 +1312,14 @@
 		ok = 1;
 	}
 	spin_unlock_irqrestore(&midi->input_lock, flags);
-	if (!ok)
+	if (!ok) {
 		snd_printk(KERN_ERR "midi_cmd: 0x%x failed at 0x%lx (status = 0x%x, data = 0x%x)!!!\n",
 			   cmd, emu->port,
 			   mpu401_read_stat(emu, midi),
 			   mpu401_read_data(emu, midi));
+		return 1;
+	}
+	return 0;
 }
 
 static int snd_emu10k1x_midi_input_open(struct snd_rawmidi_substream *substream)
@@ -1332,12 +1335,17 @@
 	midi->substream_input = substream;
 	if (!(midi->midi_mode & EMU10K1X_MIDI_MODE_OUTPUT)) {
 		spin_unlock_irqrestore(&midi->open_lock, flags);
-		snd_emu10k1x_midi_cmd(emu, midi, MPU401_RESET, 1);
-		snd_emu10k1x_midi_cmd(emu, midi, MPU401_ENTER_UART, 1);
+		if (snd_emu10k1x_midi_cmd(emu, midi, MPU401_RESET, 1))
+			goto error_out;
+		if (snd_emu10k1x_midi_cmd(emu, midi, MPU401_ENTER_UART, 1))
+			goto error_out;
 	} else {
 		spin_unlock_irqrestore(&midi->open_lock, flags);
 	}
 	return 0;
+
+error_out:
+	return -EIO;
 }
 
 static int snd_emu10k1x_midi_output_open(struct snd_rawmidi_substream *substream)
@@ -1353,12 +1361,17 @@
 	midi->substream_output = substream;
 	if (!(midi->midi_mode & EMU10K1X_MIDI_MODE_INPUT)) {
 		spin_unlock_irqrestore(&midi->open_lock, flags);
-		snd_emu10k1x_midi_cmd(emu, midi, MPU401_RESET, 1);
-		snd_emu10k1x_midi_cmd(emu, midi, MPU401_ENTER_UART, 1);
+		if (snd_emu10k1x_midi_cmd(emu, midi, MPU401_RESET, 1))
+			goto error_out;
+		if (snd_emu10k1x_midi_cmd(emu, midi, MPU401_ENTER_UART, 1))
+			goto error_out;
 	} else {
 		spin_unlock_irqrestore(&midi->open_lock, flags);
 	}
 	return 0;
+
+error_out:
+	return -EIO;
 }
 
 static int snd_emu10k1x_midi_input_close(struct snd_rawmidi_substream *substream)
@@ -1366,6 +1379,7 @@
 	struct emu10k1x *emu;
 	struct emu10k1x_midi *midi = substream->rmidi->private_data;
 	unsigned long flags;
+	int err = 0;
 
 	emu = midi->emu;
 	snd_assert(emu, return -ENXIO);
@@ -1375,11 +1389,11 @@
 	midi->substream_input = NULL;
 	if (!(midi->midi_mode & EMU10K1X_MIDI_MODE_OUTPUT)) {
 		spin_unlock_irqrestore(&midi->open_lock, flags);
-		snd_emu10k1x_midi_cmd(emu, midi, MPU401_RESET, 0);
+		err = snd_emu10k1x_midi_cmd(emu, midi, MPU401_RESET, 0);
 	} else {
 		spin_unlock_irqrestore(&midi->open_lock, flags);
 	}
-	return 0;
+	return err;
 }
 
 static int snd_emu10k1x_midi_output_close(struct snd_rawmidi_substream *substream)
@@ -1387,6 +1401,7 @@
 	struct emu10k1x *emu;
 	struct emu10k1x_midi *midi = substream->rmidi->private_data;
 	unsigned long flags;
+	int err = 0;
 
 	emu = midi->emu;
 	snd_assert(emu, return -ENXIO);
@@ -1396,11 +1411,11 @@
 	midi->substream_output = NULL;
 	if (!(midi->midi_mode & EMU10K1X_MIDI_MODE_INPUT)) {
 		spin_unlock_irqrestore(&midi->open_lock, flags);
-		snd_emu10k1x_midi_cmd(emu, midi, MPU401_RESET, 0);
+		err = snd_emu10k1x_midi_cmd(emu, midi, MPU401_RESET, 0);
 	} else {
 		spin_unlock_irqrestore(&midi->open_lock, flags);
 	}
-	return 0;
+	return err;
 }
 
 static void snd_emu10k1x_midi_input_trigger(struct snd_rawmidi_substream *substream, int up)
@@ -1594,7 +1609,7 @@
 }
 
 // PCI IDs
-static struct pci_device_id snd_emu10k1x_ids[] __devinitdata = {
+static struct pci_device_id snd_emu10k1x_ids[] = {
 	{ 0x1102, 0x0006, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },	/* Dell OEM version (EMU10K1) */
 	{ 0, }
 };
diff -urN linux-2.6.18-rc1/sound/pci/emu10k1/emumpu401.c linux-2.6.18-rc2/sound/pci/emu10k1/emumpu401.c
--- linux-2.6.18-rc1/sound/pci/emu10k1/emumpu401.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/sound/pci/emu10k1/emumpu401.c	2006-07-15 22:34:49.477746510 +0000
@@ -116,7 +116,7 @@
 	do_emu10k1_midi_interrupt(emu, &emu->midi2, status);
 }
 
-static void snd_emu10k1_midi_cmd(struct snd_emu10k1 * emu, struct snd_emu10k1_midi *midi, unsigned char cmd, int ack)
+static int snd_emu10k1_midi_cmd(struct snd_emu10k1 * emu, struct snd_emu10k1_midi *midi, unsigned char cmd, int ack)
 {
 	unsigned long flags;
 	int timeout, ok;
@@ -141,11 +141,14 @@
 		ok = 1;
 	}
 	spin_unlock_irqrestore(&midi->input_lock, flags);
-	if (!ok)
+	if (!ok) {
 		snd_printk(KERN_ERR "midi_cmd: 0x%x failed at 0x%lx (status = 0x%x, data = 0x%x)!!!\n",
 			   cmd, emu->port,
 			   mpu401_read_stat(emu, midi),
 			   mpu401_read_data(emu, midi));
+		return 1;
+	}
+	return 0;
 }
 
 static int snd_emu10k1_midi_input_open(struct snd_rawmidi_substream *substream)
@@ -161,12 +164,17 @@
 	midi->substream_input = substream;
 	if (!(midi->midi_mode & EMU10K1_MIDI_MODE_OUTPUT)) {
 		spin_unlock_irqrestore(&midi->open_lock, flags);
-		snd_emu10k1_midi_cmd(emu, midi, MPU401_RESET, 1);
-		snd_emu10k1_midi_cmd(emu, midi, MPU401_ENTER_UART, 1);
+		if (snd_emu10k1_midi_cmd(emu, midi, MPU401_RESET, 1))
+			goto error_out;
+		if (snd_emu10k1_midi_cmd(emu, midi, MPU401_ENTER_UART, 1))
+			goto error_out;
 	} else {
 		spin_unlock_irqrestore(&midi->open_lock, flags);
 	}
 	return 0;
+
+error_out:
+	return -EIO;
 }
 
 static int snd_emu10k1_midi_output_open(struct snd_rawmidi_substream *substream)
@@ -182,12 +190,17 @@
 	midi->substream_output = substream;
 	if (!(midi->midi_mode & EMU10K1_MIDI_MODE_INPUT)) {
 		spin_unlock_irqrestore(&midi->open_lock, flags);
-		snd_emu10k1_midi_cmd(emu, midi, MPU401_RESET, 1);
-		snd_emu10k1_midi_cmd(emu, midi, MPU401_ENTER_UART, 1);
+		if (snd_emu10k1_midi_cmd(emu, midi, MPU401_RESET, 1))
+			goto error_out;
+		if (snd_emu10k1_midi_cmd(emu, midi, MPU401_ENTER_UART, 1))
+			goto error_out;
 	} else {
 		spin_unlock_irqrestore(&midi->open_lock, flags);
 	}
 	return 0;
+
+error_out:
+	return -EIO;
 }
 
 static int snd_emu10k1_midi_input_close(struct snd_rawmidi_substream *substream)
@@ -195,6 +208,7 @@
 	struct snd_emu10k1 *emu;
 	struct snd_emu10k1_midi *midi = (struct snd_emu10k1_midi *)substream->rmidi->private_data;
 	unsigned long flags;
+	int err = 0;
 
 	emu = midi->emu;
 	snd_assert(emu, return -ENXIO);
@@ -204,11 +218,11 @@
 	midi->substream_input = NULL;
 	if (!(midi->midi_mode & EMU10K1_MIDI_MODE_OUTPUT)) {
 		spin_unlock_irqrestore(&midi->open_lock, flags);
-		snd_emu10k1_midi_cmd(emu, midi, MPU401_RESET, 0);
+		err = snd_emu10k1_midi_cmd(emu, midi, MPU401_RESET, 0);
 	} else {
 		spin_unlock_irqrestore(&midi->open_lock, flags);
 	}
-	return 0;
+	return err;
 }
 
 static int snd_emu10k1_midi_output_close(struct snd_rawmidi_substream *substream)
@@ -216,6 +230,7 @@
 	struct snd_emu10k1 *emu;
 	struct snd_emu10k1_midi *midi = (struct snd_emu10k1_midi *)substream->rmidi->private_data;
 	unsigned long flags;
+	int err = 0;
 
 	emu = midi->emu;
 	snd_assert(emu, return -ENXIO);
@@ -225,11 +240,11 @@
 	midi->substream_output = NULL;
 	if (!(midi->midi_mode & EMU10K1_MIDI_MODE_INPUT)) {
 		spin_unlock_irqrestore(&midi->open_lock, flags);
-		snd_emu10k1_midi_cmd(emu, midi, MPU401_RESET, 0);
+		err = snd_emu10k1_midi_cmd(emu, midi, MPU401_RESET, 0);
 	} else {
 		spin_unlock_irqrestore(&midi->open_lock, flags);
 	}
-	return 0;
+	return err;
 }
 
 static void snd_emu10k1_midi_input_trigger(struct snd_rawmidi_substream *substream, int up)
diff -urN linux-2.6.18-rc1/sound/pci/ens1370.c linux-2.6.18-rc2/sound/pci/ens1370.c
--- linux-2.6.18-rc1/sound/pci/ens1370.c	2006-07-15 22:34:44.145167669 +0000
+++ linux-2.6.18-rc2/sound/pci/ens1370.c	2006-07-15 22:34:49.481746945 +0000
@@ -446,7 +446,7 @@
 
 static irqreturn_t snd_audiopci_interrupt(int irq, void *dev_id, struct pt_regs *regs);
 
-static struct pci_device_id snd_audiopci_ids[] __devinitdata = {
+static struct pci_device_id snd_audiopci_ids[] = {
 #ifdef CHIP1370
 	{ 0x1274, 0x5000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },	/* ES1370 */
 #endif
diff -urN linux-2.6.18-rc1/sound/pci/es1938.c linux-2.6.18-rc2/sound/pci/es1938.c
--- linux-2.6.18-rc1/sound/pci/es1938.c	2006-07-15 22:34:44.145167669 +0000
+++ linux-2.6.18-rc2/sound/pci/es1938.c	2006-07-15 22:34:49.481746945 +0000
@@ -242,7 +242,7 @@
 
 static irqreturn_t snd_es1938_interrupt(int irq, void *dev_id, struct pt_regs *regs);
 
-static struct pci_device_id snd_es1938_ids[] __devinitdata = {
+static struct pci_device_id snd_es1938_ids[] = {
         { 0x125d, 0x1969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* Solo-1 */
 	{ 0, }
 };
diff -urN linux-2.6.18-rc1/sound/pci/es1968.c linux-2.6.18-rc2/sound/pci/es1968.c
--- linux-2.6.18-rc1/sound/pci/es1968.c	2006-07-15 22:34:44.149168103 +0000
+++ linux-2.6.18-rc2/sound/pci/es1968.c	2006-07-15 22:34:49.481746945 +0000
@@ -592,7 +592,7 @@
 
 static irqreturn_t snd_es1968_interrupt(int irq, void *dev_id, struct pt_regs *regs);
 
-static struct pci_device_id snd_es1968_ids[] __devinitdata = {
+static struct pci_device_id snd_es1968_ids[] = {
 	/* Maestro 1 */
         { 0x1285, 0x0100, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, TYPE_MAESTRO },
 	/* Maestro 2 */
diff -urN linux-2.6.18-rc1/sound/pci/fm801.c linux-2.6.18-rc2/sound/pci/fm801.c
--- linux-2.6.18-rc1/sound/pci/fm801.c	2006-07-15 22:34:44.149168103 +0000
+++ linux-2.6.18-rc2/sound/pci/fm801.c	2006-07-15 22:34:49.481746945 +0000
@@ -35,7 +35,7 @@
 
 #include <asm/io.h>
 
-#if (defined(CONFIG_SND_FM801_TEA575X) || defined(CONFIG_SND_FM801_TEA575X_MODULE)) && (defined(CONFIG_VIDEO_DEV) || defined(CONFIG_VIDEO_DEV_MODULE))
+#ifdef CONFIG_SND_FM801_TEA575X_BOOL
 #include <sound/tea575x-tuner.h>
 #define TEA575X_RADIO 1
 #endif
@@ -199,7 +199,7 @@
 #endif
 };
 
-static struct pci_device_id snd_fm801_ids[] __devinitdata = {
+static struct pci_device_id snd_fm801_ids[] = {
 	{ 0x1319, 0x0801, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, 0, },   /* FM801 */
 	{ 0x5213, 0x0510, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, 0, },   /* Gallant Odyssey Sound 4 */
 	{ 0, }
diff -urN linux-2.6.18-rc1/sound/pci/hda/hda_intel.c linux-2.6.18-rc2/sound/pci/hda/hda_intel.c
--- linux-2.6.18-rc1/sound/pci/hda/hda_intel.c	2006-07-15 22:34:44.149168103 +0000
+++ linux-2.6.18-rc2/sound/pci/hda/hda_intel.c	2006-07-15 22:34:49.485747379 +0000
@@ -1629,7 +1629,7 @@
 }
 
 /* PCI IDs */
-static struct pci_device_id azx_ids[] __devinitdata = {
+static struct pci_device_id azx_ids[] = {
 	{ 0x8086, 0x2668, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ICH6 */
 	{ 0x8086, 0x27d8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ICH7 */
 	{ 0x8086, 0x269a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ESB2 */
diff -urN linux-2.6.18-rc1/sound/pci/hda/patch_analog.c linux-2.6.18-rc2/sound/pci/hda/patch_analog.c
--- linux-2.6.18-rc1/sound/pci/hda/patch_analog.c	2006-07-15 22:34:44.153168537 +0000
+++ linux-2.6.18-rc2/sound/pci/hda/patch_analog.c	2006-07-15 22:34:49.485747379 +0000
@@ -1545,6 +1545,9 @@
 /* reivision id to check workarounds */
 #define AD1988A_REV2		0x100200
 
+#define is_rev2(codec) \
+	((codec)->vendor_id == 0x11d41988 && \
+	 (codec)->revision_id == AD1988A_REV2)
 
 /*
  * mixers
@@ -1636,6 +1639,7 @@
 	HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x05, 1, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x05, 2, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Side Playback Volume", 0x0a, 0x0, HDA_OUTPUT),
+	{ } /* end */
 };
 
 static struct snd_kcontrol_new ad1988_6stack_mixers1_rev2[] = {
@@ -1644,6 +1648,7 @@
 	HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0a, 2, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Side Playback Volume", 0x06, 0x0, HDA_OUTPUT),
+	{ } /* end */
 };
 
 static struct snd_kcontrol_new ad1988_6stack_mixers2[] = {
@@ -1682,6 +1687,7 @@
 	HDA_CODEC_VOLUME("Surround Playback Volume", 0x0a, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x05, 1, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x05, 2, 0x0, HDA_OUTPUT),
+	{ } /* end */
 };
 
 static struct snd_kcontrol_new ad1988_3stack_mixers1_rev2[] = {
@@ -1689,6 +1695,7 @@
 	HDA_CODEC_VOLUME("Surround Playback Volume", 0x0a, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x06, 1, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x06, 2, 0x0, HDA_OUTPUT),
+	{ } /* end */
 };
 
 static struct snd_kcontrol_new ad1988_3stack_mixers2[] = {
@@ -2195,7 +2202,7 @@
 		/* A     B     C     D     E     F     G     H */
 		0x04, 0x05, 0x0a, 0x04, 0x06, 0x05, 0x0a, 0x06
 	};
-	if (codec->revision_id == AD1988A_REV2)
+	if (is_rev2(codec))
 		return idx_to_dac_rev2[idx];
 	else
 		return idx_to_dac[idx];
@@ -2564,7 +2571,7 @@
 	mutex_init(&spec->amp_mutex);
 	codec->spec = spec;
 
-	if (codec->revision_id == AD1988A_REV2)
+	if (is_rev2(codec))
 		snd_printk(KERN_INFO "patch_analog: AD1988A rev.2 is detected, enable workarounds\n");
 
 	board_config = snd_hda_check_board_config(codec, ad1988_cfg_tbl);
@@ -2590,13 +2597,13 @@
 	case AD1988_6STACK_DIG:
 		spec->multiout.max_channels = 8;
 		spec->multiout.num_dacs = 4;
-		if (codec->revision_id == AD1988A_REV2)
+		if (is_rev2(codec))
 			spec->multiout.dac_nids = ad1988_6stack_dac_nids_rev2;
 		else
 			spec->multiout.dac_nids = ad1988_6stack_dac_nids;
 		spec->input_mux = &ad1988_6stack_capture_source;
 		spec->num_mixers = 2;
-		if (codec->revision_id == AD1988A_REV2)
+		if (is_rev2(codec))
 			spec->mixers[0] = ad1988_6stack_mixers1_rev2;
 		else
 			spec->mixers[0] = ad1988_6stack_mixers1;
@@ -2612,7 +2619,7 @@
 	case AD1988_3STACK_DIG:
 		spec->multiout.max_channels = 6;
 		spec->multiout.num_dacs = 3;
-		if (codec->revision_id == AD1988A_REV2)
+		if (is_rev2(codec))
 			spec->multiout.dac_nids = ad1988_3stack_dac_nids_rev2;
 		else
 			spec->multiout.dac_nids = ad1988_3stack_dac_nids;
@@ -2620,7 +2627,7 @@
 		spec->channel_mode = ad1988_3stack_modes;
 		spec->num_channel_mode = ARRAY_SIZE(ad1988_3stack_modes);
 		spec->num_mixers = 2;
-		if (codec->revision_id == AD1988A_REV2)
+		if (is_rev2(codec))
 			spec->mixers[0] = ad1988_3stack_mixers1_rev2;
 		else
 			spec->mixers[0] = ad1988_3stack_mixers1;
diff -urN linux-2.6.18-rc1/sound/pci/hda/patch_sigmatel.c linux-2.6.18-rc2/sound/pci/hda/patch_sigmatel.c
--- linux-2.6.18-rc1/sound/pci/hda/patch_sigmatel.c	2006-07-15 22:34:44.157168972 +0000
+++ linux-2.6.18-rc2/sound/pci/hda/patch_sigmatel.c	2006-07-15 22:34:49.489747813 +0000
@@ -351,6 +351,7 @@
 	[STAC_REF] =	ref922x_pin_configs,
 	[STAC_D945GTP3] = d945gtp3_pin_configs,
 	[STAC_D945GTP5] = d945gtp5_pin_configs,
+	[STAC_MACMINI] = d945gtp5_pin_configs,
 	[STAC_D965_2112] = d965_2112_pin_configs,
 };
 
diff -urN linux-2.6.18-rc1/sound/pci/ice1712/aureon.c linux-2.6.18-rc2/sound/pci/ice1712/aureon.c
--- linux-2.6.18-rc1/sound/pci/ice1712/aureon.c	2006-07-15 22:34:44.157168972 +0000
+++ linux-2.6.18-rc2/sound/pci/ice1712/aureon.c	2006-07-15 22:34:49.493748247 +0000
@@ -2131,7 +2131,7 @@
  		.build_controls = aureon_add_controls,
  		.eeprom_size = sizeof(aureon71_eeprom),
  		.eeprom_data = aureon71_eeprom,
-		.driver = "Aureon71Universe",
+		.driver = "Aureon71Univ", /* keep in 15 letters */
 	},
 	{
 		.subvendor = VT1724_SUBDEVICE_PRODIGY71,
diff -urN linux-2.6.18-rc1/sound/pci/ice1712/ice1712.c linux-2.6.18-rc2/sound/pci/ice1712/ice1712.c
--- linux-2.6.18-rc1/sound/pci/ice1712/ice1712.c	2006-07-15 22:34:44.161169406 +0000
+++ linux-2.6.18-rc2/sound/pci/ice1712/ice1712.c	2006-07-15 22:34:49.493748247 +0000
@@ -106,7 +106,7 @@
 MODULE_PARM_DESC(dxr_enable, "Enable DXR support for Terratec DMX6FIRE.");
 
 
-static struct pci_device_id snd_ice1712_ids[] __devinitdata = {
+static struct pci_device_id snd_ice1712_ids[] = {
 	{ PCI_VENDOR_ID_ICE, PCI_DEVICE_ID_ICE_1712, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },   /* ICE1712 */
 	{ 0, }
 };
diff -urN linux-2.6.18-rc1/sound/pci/ice1712/ice1724.c linux-2.6.18-rc2/sound/pci/ice1712/ice1724.c
--- linux-2.6.18-rc1/sound/pci/ice1712/ice1724.c	2006-07-15 22:34:44.161169406 +0000
+++ linux-2.6.18-rc2/sound/pci/ice1712/ice1724.c	2006-07-15 22:34:49.493748247 +0000
@@ -86,7 +86,7 @@
 
 
 /* Both VT1720 and VT1724 have the same PCI IDs */
-static struct pci_device_id snd_vt1724_ids[] __devinitdata = {
+static struct pci_device_id snd_vt1724_ids[] = {
 	{ PCI_VENDOR_ID_ICE, PCI_DEVICE_ID_VT1724, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	{ 0, }
 };
diff -urN linux-2.6.18-rc1/sound/pci/intel8x0.c linux-2.6.18-rc2/sound/pci/intel8x0.c
--- linux-2.6.18-rc1/sound/pci/intel8x0.c	2006-07-15 22:34:44.161169406 +0000
+++ linux-2.6.18-rc2/sound/pci/intel8x0.c	2006-07-15 22:34:49.497748682 +0000
@@ -413,7 +413,7 @@
 	u32 int_sta_mask;		/* interrupt status mask */
 };
 
-static struct pci_device_id snd_intel8x0_ids[] __devinitdata = {
+static struct pci_device_id snd_intel8x0_ids[] = {
 	{ 0x8086, 0x2415, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 82801AA */
 	{ 0x8086, 0x2425, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 82901AB */
 	{ 0x8086, 0x2445, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 82801BA */
@@ -1956,6 +1956,12 @@
 		.type = AC97_TUNE_HP_ONLY
 	},
 	{
+		.subvendor = 0x10f1,
+		.subdevice = 0x2895,
+		.name = "Tyan Thunder K8WE",
+		.type = AC97_TUNE_HP_ONLY
+	},
+	{
 		.subvendor = 0x110a,
 		.subdevice = 0x0056,
 		.name = "Fujitsu-Siemens Scenic",	/* AD1981? */
diff -urN linux-2.6.18-rc1/sound/pci/intel8x0m.c linux-2.6.18-rc2/sound/pci/intel8x0m.c
--- linux-2.6.18-rc1/sound/pci/intel8x0m.c	2006-07-15 22:34:44.165169840 +0000
+++ linux-2.6.18-rc2/sound/pci/intel8x0m.c	2006-07-15 22:34:49.497748682 +0000
@@ -224,7 +224,7 @@
 	unsigned int pcm_pos_shift;
 };
 
-static struct pci_device_id snd_intel8x0m_ids[] __devinitdata = {
+static struct pci_device_id snd_intel8x0m_ids[] = {
 	{ 0x8086, 0x2416, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 82801AA */
 	{ 0x8086, 0x2426, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 82901AB */
 	{ 0x8086, 0x2446, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 82801BA */
diff -urN linux-2.6.18-rc1/sound/pci/korg1212/korg1212.c linux-2.6.18-rc2/sound/pci/korg1212/korg1212.c
--- linux-2.6.18-rc1/sound/pci/korg1212/korg1212.c	2006-07-15 22:34:44.165169840 +0000
+++ linux-2.6.18-rc2/sound/pci/korg1212/korg1212.c	2006-07-15 22:34:49.497748682 +0000
@@ -424,7 +424,7 @@
 MODULE_PARM_DESC(enable, "Enable Korg 1212 soundcard.");
 MODULE_AUTHOR("Haroldo Gamal <gamal@alternex.com.br>");
 
-static struct pci_device_id snd_korg1212_ids[] __devinitdata = {
+static struct pci_device_id snd_korg1212_ids[] = {
 	{
 		.vendor	   = 0x10b5,
 		.device	   = 0x906d,
diff -urN linux-2.6.18-rc1/sound/pci/maestro3.c linux-2.6.18-rc2/sound/pci/maestro3.c
--- linux-2.6.18-rc1/sound/pci/maestro3.c	2006-07-15 22:34:44.165169840 +0000
+++ linux-2.6.18-rc2/sound/pci/maestro3.c	2006-07-15 22:34:49.497748682 +0000
@@ -869,7 +869,7 @@
 /*
  * pci ids
  */
-static struct pci_device_id snd_m3_ids[] __devinitdata = {
+static struct pci_device_id snd_m3_ids[] = {
 	{PCI_VENDOR_ID_ESS, PCI_DEVICE_ID_ESS_ALLEGRO_1, PCI_ANY_ID, PCI_ANY_ID,
 	 PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, 0},
 	{PCI_VENDOR_ID_ESS, PCI_DEVICE_ID_ESS_ALLEGRO, PCI_ANY_ID, PCI_ANY_ID,
@@ -2137,7 +2137,7 @@
  * DSP Code images
  */
 
-static const u16 assp_kernel_image[] __devinitdata = {
+static const u16 assp_kernel_image[] = {
     0x7980, 0x0030, 0x7980, 0x03B4, 0x7980, 0x03B4, 0x7980, 0x00FB, 0x7980, 0x00DD, 0x7980, 0x03B4, 
     0x7980, 0x0332, 0x7980, 0x0287, 0x7980, 0x03B4, 0x7980, 0x03B4, 0x7980, 0x03B4, 0x7980, 0x03B4, 
     0x7980, 0x031A, 0x7980, 0x03B4, 0x7980, 0x022F, 0x7980, 0x03B4, 0x7980, 0x03B4, 0x7980, 0x03B4, 
@@ -2224,7 +2224,7 @@
  * Mini sample rate converter code image
  * that is to be loaded at 0x400 on the DSP.
  */
-static const u16 assp_minisrc_image[] __devinitdata = {
+static const u16 assp_minisrc_image[] = {
 
     0xBF80, 0x101E, 0x906E, 0x006E, 0x8B88, 0x6980, 0xEF88, 0x906F, 0x0D6F, 0x6900, 0xEB08, 0x0412, 
     0xBC20, 0x696E, 0xB801, 0x906E, 0x7980, 0x0403, 0xB90E, 0x8807, 0xBE43, 0xBF01, 0xBE47, 0xBE41, 
@@ -2267,12 +2267,12 @@
  */
 
 #define MINISRC_LPF_LEN 10
-static const u16 minisrc_lpf[MINISRC_LPF_LEN] __devinitdata = {
+static const u16 minisrc_lpf[MINISRC_LPF_LEN] = {
 	0X0743, 0X1104, 0X0A4C, 0XF88D, 0X242C,
 	0X1023, 0X1AA9, 0X0B60, 0XEFDD, 0X186F
 };
 
-static void __devinit snd_m3_assp_init(struct snd_m3 *chip)
+static void snd_m3_assp_init(struct snd_m3 *chip)
 {
 	unsigned int i;
 
diff -urN linux-2.6.18-rc1/sound/pci/mixart/mixart.c linux-2.6.18-rc2/sound/pci/mixart/mixart.c
--- linux-2.6.18-rc1/sound/pci/mixart/mixart.c	2006-07-15 22:34:44.165169840 +0000
+++ linux-2.6.18-rc2/sound/pci/mixart/mixart.c	2006-07-15 22:34:49.497748682 +0000
@@ -61,7 +61,7 @@
 /*
  */
 
-static struct pci_device_id snd_mixart_ids[] __devinitdata = {
+static struct pci_device_id snd_mixart_ids[] = {
 	{ 0x1057, 0x0003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* MC8240 */
 	{ 0, }
 };
diff -urN linux-2.6.18-rc1/sound/pci/nm256/nm256.c linux-2.6.18-rc2/sound/pci/nm256/nm256.c
--- linux-2.6.18-rc1/sound/pci/nm256/nm256.c	2006-07-15 22:34:44.165169840 +0000
+++ linux-2.6.18-rc2/sound/pci/nm256/nm256.c	2006-07-15 22:34:49.501749116 +0000
@@ -263,7 +263,7 @@
 /*
  * PCI ids
  */
-static struct pci_device_id snd_nm256_ids[] __devinitdata = {
+static struct pci_device_id snd_nm256_ids[] = {
 	{PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
diff -urN linux-2.6.18-rc1/sound/pci/pcxhr/pcxhr.c linux-2.6.18-rc2/sound/pci/pcxhr/pcxhr.c
--- linux-2.6.18-rc1/sound/pci/pcxhr/pcxhr.c	2006-07-15 22:34:44.165169840 +0000
+++ linux-2.6.18-rc2/sound/pci/pcxhr/pcxhr.c	2006-07-15 22:34:49.501749116 +0000
@@ -73,7 +73,7 @@
 	PCI_ID_LAST
 };
 
-static struct pci_device_id pcxhr_ids[] __devinitdata = {
+static struct pci_device_id pcxhr_ids[] = {
 	{ 0x10b5, 0x9656, 0x1369, 0xb001, 0, 0, PCI_ID_VX882HR, },   /* VX882HR */
 	{ 0x10b5, 0x9656, 0x1369, 0xb101, 0, 0, PCI_ID_PCX882HR, },  /* PCX882HR */
 	{ 0x10b5, 0x9656, 0x1369, 0xb201, 0, 0, PCI_ID_VX881HR, },   /* VX881HR */
diff -urN linux-2.6.18-rc1/sound/pci/riptide/riptide.c linux-2.6.18-rc2/sound/pci/riptide/riptide.c
--- linux-2.6.18-rc1/sound/pci/riptide/riptide.c	2006-07-15 22:34:44.169170274 +0000
+++ linux-2.6.18-rc2/sound/pci/riptide/riptide.c	2006-07-15 22:34:49.501749116 +0000
@@ -506,7 +506,7 @@
 /*
  */
 
-static struct pci_device_id snd_riptide_ids[] __devinitdata = {
+static struct pci_device_id snd_riptide_ids[] = {
 	{
 	 .vendor = 0x127a,.device = 0x4310,
 	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
diff -urN linux-2.6.18-rc1/sound/pci/rme32.c linux-2.6.18-rc2/sound/pci/rme32.c
--- linux-2.6.18-rc1/sound/pci/rme32.c	2006-07-15 22:34:44.169170274 +0000
+++ linux-2.6.18-rc2/sound/pci/rme32.c	2006-07-15 22:34:49.501749116 +0000
@@ -227,7 +227,7 @@
 	struct snd_kcontrol *spdif_ctl;
 };
 
-static struct pci_device_id snd_rme32_ids[] __devinitdata = {
+static struct pci_device_id snd_rme32_ids[] = {
 	{PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_RME_DIGI32,
 	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
 	{PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_8,
diff -urN linux-2.6.18-rc1/sound/pci/rme96.c linux-2.6.18-rc2/sound/pci/rme96.c
--- linux-2.6.18-rc1/sound/pci/rme96.c	2006-07-15 22:34:44.169170274 +0000
+++ linux-2.6.18-rc2/sound/pci/rme96.c	2006-07-15 22:34:49.501749116 +0000
@@ -232,7 +232,7 @@
 	struct snd_kcontrol   *spdif_ctl;
 };
 
-static struct pci_device_id snd_rme96_ids[] __devinitdata = {
+static struct pci_device_id snd_rme96_ids[] = {
 	{ PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
 	{ PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96_8,
diff -urN linux-2.6.18-rc1/sound/pci/rme9652/hdsp.c linux-2.6.18-rc2/sound/pci/rme9652/hdsp.c
--- linux-2.6.18-rc1/sound/pci/rme9652/hdsp.c	2006-07-15 22:34:44.169170274 +0000
+++ linux-2.6.18-rc2/sound/pci/rme9652/hdsp.c	2006-07-15 22:34:49.505749550 +0000
@@ -568,7 +568,7 @@
 }
 
 
-static struct pci_device_id snd_hdsp_ids[] __devinitdata = {
+static struct pci_device_id snd_hdsp_ids[] = {
 	{
 		.vendor = PCI_VENDOR_ID_XILINX,
 		.device = PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP, 
@@ -1356,7 +1356,7 @@
 	.trigger =	snd_hdsp_midi_input_trigger,
 };
 
-static int __devinit snd_hdsp_create_midi (struct snd_card *card, struct hdsp *hdsp, int id)
+static int snd_hdsp_create_midi (struct snd_card *card, struct hdsp *hdsp, int id)
 {
 	char buf[32];
 
diff -urN linux-2.6.18-rc1/sound/pci/rme9652/rme9652.c linux-2.6.18-rc2/sound/pci/rme9652/rme9652.c
--- linux-2.6.18-rc1/sound/pci/rme9652/rme9652.c	2006-07-15 22:34:44.173170709 +0000
+++ linux-2.6.18-rc2/sound/pci/rme9652/rme9652.c	2006-07-15 22:34:49.505749550 +0000
@@ -315,7 +315,7 @@
 }
 
 
-static struct pci_device_id snd_rme9652_ids[] __devinitdata = {
+static struct pci_device_id snd_rme9652_ids[] = {
 	{
 		.vendor	   = 0x10ee,
 		.device	   = 0x3fc4,
diff -urN linux-2.6.18-rc1/sound/pci/sonicvibes.c linux-2.6.18-rc2/sound/pci/sonicvibes.c
--- linux-2.6.18-rc1/sound/pci/sonicvibes.c	2006-07-15 22:34:44.173170709 +0000
+++ linux-2.6.18-rc2/sound/pci/sonicvibes.c	2006-07-15 22:34:49.505749550 +0000
@@ -243,7 +243,7 @@
 #endif
 };
 
-static struct pci_device_id snd_sonic_ids[] __devinitdata = {
+static struct pci_device_id snd_sonic_ids[] = {
 	{ 0x5333, 0xca00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
         { 0, }
 };
diff -urN linux-2.6.18-rc1/sound/pci/trident/trident.c linux-2.6.18-rc2/sound/pci/trident/trident.c
--- linux-2.6.18-rc1/sound/pci/trident/trident.c	2006-07-15 22:34:44.173170709 +0000
+++ linux-2.6.18-rc2/sound/pci/trident/trident.c	2006-07-15 22:34:49.505749550 +0000
@@ -63,7 +63,7 @@
 module_param_array(wavetable_size, int, NULL, 0444);
 MODULE_PARM_DESC(wavetable_size, "Maximum memory size in kB for wavetable synth.");
 
-static struct pci_device_id snd_trident_ids[] __devinitdata = {
+static struct pci_device_id snd_trident_ids[] = {
 	{PCI_DEVICE(PCI_VENDOR_ID_TRIDENT, PCI_DEVICE_ID_TRIDENT_4DWAVE_DX), 
 		PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, 0},
 	{PCI_DEVICE(PCI_VENDOR_ID_TRIDENT, PCI_DEVICE_ID_TRIDENT_4DWAVE_NX), 
diff -urN linux-2.6.18-rc1/sound/pci/via82xx.c linux-2.6.18-rc2/sound/pci/via82xx.c
--- linux-2.6.18-rc1/sound/pci/via82xx.c	2006-07-15 22:34:44.177171143 +0000
+++ linux-2.6.18-rc2/sound/pci/via82xx.c	2006-07-15 22:34:49.509749984 +0000
@@ -396,7 +396,7 @@
 #endif
 };
 
-static struct pci_device_id snd_via82xx_ids[] __devinitdata = {
+static struct pci_device_id snd_via82xx_ids[] = {
 	/* 0x1106, 0x3058 */
 	{ PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA686, },	/* 686A */
 	/* 0x1106, 0x3059 */
diff -urN linux-2.6.18-rc1/sound/pci/via82xx_modem.c linux-2.6.18-rc2/sound/pci/via82xx_modem.c
--- linux-2.6.18-rc1/sound/pci/via82xx_modem.c	2006-07-15 22:34:44.177171143 +0000
+++ linux-2.6.18-rc2/sound/pci/via82xx_modem.c	2006-07-15 22:34:49.509749984 +0000
@@ -261,7 +261,7 @@
 	struct snd_info_entry *proc_entry;
 };
 
-static struct pci_device_id snd_via82xx_modem_ids[] __devinitdata = {
+static struct pci_device_id snd_via82xx_modem_ids[] = {
 	{ 0x1106, 0x3068, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA82XX_MODEM, },
 	{ 0, }
 };
diff -urN linux-2.6.18-rc1/sound/pci/vx222/vx222.c linux-2.6.18-rc2/sound/pci/vx222/vx222.c
--- linux-2.6.18-rc1/sound/pci/vx222/vx222.c	2006-07-15 22:34:44.177171143 +0000
+++ linux-2.6.18-rc2/sound/pci/vx222/vx222.c	2006-07-15 22:34:49.509749984 +0000
@@ -60,7 +60,7 @@
 	VX_PCI_VX222_NEW
 };
 
-static struct pci_device_id snd_vx222_ids[] __devinitdata = {
+static struct pci_device_id snd_vx222_ids[] = {
 	{ 0x10b5, 0x9050, 0x1369, PCI_ANY_ID, 0, 0, VX_PCI_VX222_OLD, },   /* PLX */
 	{ 0x10b5, 0x9030, 0x1369, PCI_ANY_ID, 0, 0, VX_PCI_VX222_NEW, },   /* PLX */
 	{ 0, }
diff -urN linux-2.6.18-rc1/sound/pci/ymfpci/ymfpci.c linux-2.6.18-rc2/sound/pci/ymfpci/ymfpci.c
--- linux-2.6.18-rc1/sound/pci/ymfpci/ymfpci.c	2006-07-15 22:34:44.177171143 +0000
+++ linux-2.6.18-rc2/sound/pci/ymfpci/ymfpci.c	2006-07-15 22:34:49.509749984 +0000
@@ -70,7 +70,7 @@
 module_param_array(rear_swap, bool, NULL, 0444);
 MODULE_PARM_DESC(rear_swap, "Swap rear channels (must be enabled for correct IEC958 (S/PDIF)) output");
 
-static struct pci_device_id snd_ymfpci_ids[] __devinitdata = {
+static struct pci_device_id snd_ymfpci_ids[] = {
         { 0x1073, 0x0004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* YMF724 */
         { 0x1073, 0x000d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* YMF724F */
         { 0x1073, 0x000a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* YMF740 */
diff -urN linux-2.6.18-rc1/sound/pcmcia/pdaudiocf/pdaudiocf.c linux-2.6.18-rc2/sound/pcmcia/pdaudiocf/pdaudiocf.c
--- linux-2.6.18-rc1/sound/pcmcia/pdaudiocf/pdaudiocf.c	2006-06-18 01:49:35.000000000 +0000
+++ linux-2.6.18-rc2/sound/pcmcia/pdaudiocf/pdaudiocf.c	2006-07-15 22:34:49.513750418 +0000
@@ -241,12 +241,13 @@
 	CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, parse));
 	link->conf.ConfigBase = parse->config.base;
 	link->conf.ConfigIndex = 0x5;
-	kfree(parse);
 
 	CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
 	CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
 	CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
 
+	kfree(parse);
+
 	if (snd_pdacf_assign_resources(pdacf, link->io.BasePort1, link->irq.AssignedIRQ) < 0)
 		goto failed;
 
@@ -254,6 +255,7 @@
 	return 0;
 
 cs_failed:
+	kfree(parse);
 	cs_error(link, last_fn, last_ret);
 failed:
 	pcmcia_disable_device(link);