From pingc@wacom.com Fri Nov 4 11:01:00 2005 Message-ID: <320348265B16DA11968C0060CF213AEB1C814F@wacom-nt2.wacom.com> From: Ping Cheng To: 'Dmitry Torokhov ' Cc: , , Subject: usb wacom tablet driver update Date: Fri, 4 Nov 2005 10:52:28 -0800 This patch adds support for Graphire4, Cintiq 710, Intuos3 6x11, etc. and report Device IDs. Signed-off-by: Ping Cheng Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/wacom.c | 133 ++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 110 insertions(+), 23 deletions(-) --- gregkh-2.6.orig/drivers/usb/input/wacom.c +++ gregkh-2.6/drivers/usb/input/wacom.c @@ -52,8 +52,10 @@ * v1.30.1 (pi) - Added Graphire3 support * v1.40 (pc) - Add support for several new devices, fix eraser reporting, ... * v1.43 (pc) - Added support for Cintiq 21UX - - Fixed a Graphire bug - - Merged wacom_intuos3_irq into wacom_intuos_irq + * - Fixed a Graphire bug + * - Merged wacom_intuos3_irq into wacom_intuos_irq + * v1.44 (pc) - Added support for Graphire4, Cintiq 710, Intuos3 6x11, etc. + * - Report Device IDs */ /* @@ -76,7 +78,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v1.43" +#define DRIVER_VERSION "v1.44" #define DRIVER_AUTHOR "Vojtech Pavlik " #define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver" #define DRIVER_LICENSE "GPL" @@ -86,10 +88,14 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE(DRIVER_LICENSE); #define USB_VENDOR_ID_WACOM 0x056a +#define STYLUS_DEVICE_ID 0x02 +#define CURSOR_DEVICE_ID 0x06 +#define ERASER_DEVICE_ID 0x0A enum { PENPARTNER = 0, GRAPHIRE, + G4, PL, INTUOS, INTUOS3, @@ -116,6 +122,7 @@ struct wacom { struct urb *irq; struct wacom_features *features; int tool[2]; + int id[2]; __u32 serial[2]; char phys[32]; }; @@ -136,7 +143,7 @@ static void wacom_pl_irq(struct urb *urb struct wacom *wacom = urb->context; unsigned char *data = wacom->data; struct input_dev *dev = wacom->dev; - int prox, pressure; + int prox, pressure, id; int retval; switch (urb->status) { @@ -163,6 +170,7 @@ static void wacom_pl_irq(struct urb *urb input_regs(dev, regs); + id = ERASER_DEVICE_ID; if (prox) { pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1)); @@ -177,11 +185,15 @@ static void wacom_pl_irq(struct urb *urb * an out of proximity for previous tool then a in for new tool. */ if (!wacom->tool[0]) { - /* Going into proximity select tool */ - wacom->tool[1] = (data[4] & 0x20)? BTN_TOOL_RUBBER : BTN_TOOL_PEN; + /* Eraser bit set for DTF */ + if (data[1] & 0x10) + wacom->tool[1] = BTN_TOOL_RUBBER; + else + /* Going into proximity select tool */ + wacom->tool[1] = (data[4] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; } else { /* was entered with stylus2 pressed */ - if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20) ) { + if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) { /* report out proximity for previous tool */ input_report_key(dev, wacom->tool[1], 0); input_sync(dev); @@ -192,8 +204,9 @@ static void wacom_pl_irq(struct urb *urb if (wacom->tool[1] != BTN_TOOL_RUBBER) { /* Unknown tool selected default to pen tool */ wacom->tool[1] = BTN_TOOL_PEN; + id = STYLUS_DEVICE_ID; } - input_report_key(dev, wacom->tool[1], prox); /* report in proximity for tool */ + input_report_key(dev, wacom->tool[1], id); /* report in proximity for tool */ input_report_abs(dev, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14)); input_report_abs(dev, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14)); input_report_abs(dev, ABS_PRESSURE, pressure); @@ -250,10 +263,10 @@ static void wacom_ptu_irq(struct urb *ur input_regs(dev, regs); if (data[1] & 0x04) { - input_report_key(dev, BTN_TOOL_RUBBER, data[1] & 0x20); + input_report_key(dev, BTN_TOOL_RUBBER, (data[1] & 0x20) ? ERASER_DEVICE_ID : 0); input_report_key(dev, BTN_TOUCH, data[1] & 0x08); } else { - input_report_key(dev, BTN_TOOL_PEN, data[1] & 0x20); + input_report_key(dev, BTN_TOOL_PEN, (data[1] & 0x20) ? STYLUS_DEVICE_ID : 0); input_report_key(dev, BTN_TOUCH, data[1] & 0x01); } input_report_abs(dev, ABS_X, le16_to_cpu(*(__le16 *) &data[2])); @@ -299,7 +312,7 @@ static void wacom_penpartner_irq(struct } input_regs(dev, regs); - input_report_key(dev, BTN_TOOL_PEN, 1); + input_report_key(dev, BTN_TOOL_PEN, STYLUS_DEVICE_ID); input_report_abs(dev, ABS_X, le16_to_cpu(*(__le16 *) &data[1])); input_report_abs(dev, ABS_Y, le16_to_cpu(*(__le16 *) &data[3])); input_report_abs(dev, ABS_PRESSURE, (signed char)data[6] + 127); @@ -319,7 +332,7 @@ static void wacom_graphire_irq(struct ur struct wacom *wacom = urb->context; unsigned char *data = wacom->data; struct input_dev *dev = wacom->dev; - int x, y; + int x, y, id, rw; int retval; switch (urb->status) { @@ -344,6 +357,7 @@ static void wacom_graphire_irq(struct ur input_regs(dev, regs); + id = STYLUS_DEVICE_ID; if (data[1] & 0x10) { /* in prox */ switch ((data[1] >> 5) & 3) { @@ -354,18 +368,27 @@ static void wacom_graphire_irq(struct ur case 1: /* Rubber */ wacom->tool[0] = BTN_TOOL_RUBBER; + id = ERASER_DEVICE_ID; break; case 2: /* Mouse with wheel */ input_report_key(dev, BTN_MIDDLE, data[1] & 0x04); - input_report_rel(dev, REL_WHEEL, (signed char) data[6]); + if (wacom->features->type == G4) { + rw = data[7] & 0x04 ? -(data[7] & 0x03) : (data[7] & 0x03); + input_report_rel(dev, REL_WHEEL, rw); + } else + input_report_rel(dev, REL_WHEEL, (signed char) data[6]); /* fall through */ case 3: /* Mouse without wheel */ wacom->tool[0] = BTN_TOOL_MOUSE; + id = CURSOR_DEVICE_ID; input_report_key(dev, BTN_LEFT, data[1] & 0x01); input_report_key(dev, BTN_RIGHT, data[1] & 0x02); - input_report_abs(dev, ABS_DISTANCE, data[7]); + if (wacom->features->type == G4) + input_report_abs(dev, ABS_DISTANCE, data[6]); + else + input_report_abs(dev, ABS_DISTANCE, data[7]); break; } } @@ -376,16 +399,50 @@ static void wacom_graphire_irq(struct ur input_report_abs(dev, ABS_X, x); input_report_abs(dev, ABS_Y, y); if (wacom->tool[0] != BTN_TOOL_MOUSE) { - input_report_abs(dev, ABS_PRESSURE, le16_to_cpu(*(__le16 *) &data[6])); + input_report_abs(dev, ABS_PRESSURE, data[6] | ((data[7] & 0x01) << 8)); input_report_key(dev, BTN_TOUCH, data[1] & 0x01); input_report_key(dev, BTN_STYLUS, data[1] & 0x02); input_report_key(dev, BTN_STYLUS2, data[1] & 0x04); } } - input_report_key(dev, wacom->tool[0], data[1] & 0x10); + input_report_key(dev, wacom->tool[0], (data[1] & 0x10) ? id : 0); input_sync(dev); + /* send pad data */ + if (wacom->features->type == G4) { + /* fist time sending pad data */ + if (wacom->tool[1] != BTN_TOOL_FINGER) { + wacom->id[1] = 0; + wacom->serial[1] = (data[7] & 0x38) >> 2; + } + if (data[7] & 0xf8) { + input_report_key(dev, BTN_0, (data[7] & 0x40)); + input_report_key(dev, BTN_4, (data[7] & 0x80)); + if (((data[7] & 0x38) >> 2) == (wacom->serial[1] & 0x0e)) + /* alter REL_WHEEL value so X apps can get it */ + wacom->serial[1] += (wacom->serial[1] & 0x01) ? -1 : 1; + else + wacom->serial[1] = (data[7] & 0x38 ) >> 2; + + /* don't alter the value when there is no wheel event */ + if (wacom->serial[1] == 1) + wacom->serial[1] = 0; + rw = wacom->serial[1]; + rw = (rw & 0x08) ? -(rw & 0x07) : (rw & 0x07); + input_report_rel(dev, REL_WHEEL, rw); + wacom->tool[1] = BTN_TOOL_FINGER; + wacom->id[1] = data[7] & 0xf8; + input_report_key(dev, wacom->tool[1], 0xf0); + input_event(dev, EV_MSC, MSC_SERIAL, 0xf0); + } else if (wacom->id[1]) { + wacom->id[1] = 0; + wacom->serial[1] = 0; + input_report_key(dev, wacom->tool[1], 0); + input_event(dev, EV_MSC, MSC_SERIAL, 0xf0); + } + input_sync(dev); + } exit: retval = usb_submit_urb (urb, GFP_ATOMIC); if (retval) @@ -410,7 +467,8 @@ static int wacom_intuos_inout(struct urb (data[4] << 20) + (data[5] << 12) + (data[6] << 4) + (data[7] >> 4); - switch ((data[2] << 4) | (data[3] >> 4)) { + wacom->id[idx] = (data[2] << 4) | (data[3] >> 4); + switch (wacom->id[idx]) { case 0x812: /* Inking pen */ case 0x801: /* Intuos3 Inking pen */ case 0x012: @@ -458,7 +516,7 @@ static int wacom_intuos_inout(struct urb default: /* Unknown tool */ wacom->tool[idx] = BTN_TOOL_PEN; } - input_report_key(dev, wacom->tool[idx], 1); + input_report_key(dev, wacom->tool[idx], wacom->id[idx]); input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]); input_sync(dev); return 1; @@ -637,7 +695,7 @@ static void wacom_intuos_irq(struct urb } } - input_report_key(dev, wacom->tool[idx], 1); + input_report_key(dev, wacom->tool[idx], wacom->id[idx]); input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]); input_sync(dev); @@ -655,6 +713,13 @@ static struct wacom_features wacom_featu { "Wacom Graphire2 5x7", 8, 13918, 10206, 511, 32, GRAPHIRE, wacom_graphire_irq }, { "Wacom Graphire3", 8, 10208, 7424, 511, 32, GRAPHIRE, wacom_graphire_irq }, { "Wacom Graphire3 6x8", 8, 16704, 12064, 511, 32, GRAPHIRE, wacom_graphire_irq }, + { "Wacom Graphire4 4x5", 8, 10208, 7424, 511, 32, G4, wacom_graphire_irq }, + { "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 32, G4, wacom_graphire_irq }, + { "Wacom Volito", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_graphire_irq }, + { "Wacom PenStation2", 8, 3250, 2320, 255, 32, GRAPHIRE, wacom_graphire_irq }, + { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_graphire_irq }, + { "Wacom Volito2 2x3", 8, 3248, 2320, 511, 32, GRAPHIRE, wacom_graphire_irq }, + { "Wacom PenPartner2", 8, 3250, 2320, 255, 32, GRAPHIRE, wacom_graphire_irq }, { "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 15, INTUOS, wacom_intuos_irq }, { "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_intuos_irq }, { "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 15, INTUOS, wacom_intuos_irq }, @@ -666,16 +731,20 @@ static struct wacom_features wacom_featu { "Wacom PL600SX", 8, 6260, 5016, 255, 32, PL, wacom_pl_irq }, { "Wacom PL550", 8, 6144, 4608, 511, 32, PL, wacom_pl_irq }, { "Wacom PL800", 8, 7220, 5780, 511, 32, PL, wacom_pl_irq }, + { "Wacom PL700", 8, 6758, 5406, 511, 32, PL, wacom_pl_irq }, + { "Wacom PL510", 8, 6282, 4762, 511, 32, PL, wacom_pl_irq }, + { "Wacom PL710", 8, 34080, 27660, 511, 32, PL, wacom_pl_irq }, + { "Wacom DTF720", 8, 6858, 5506, 511, 32, PL, wacom_pl_irq }, + { "Wacom Cintiq Partner",8, 20480, 15360, 511, 32, PL, wacom_ptu_irq }, { "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 15, INTUOS, wacom_intuos_irq }, { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_intuos_irq }, { "Wacom Intuos2 9x12", 10, 30480, 24060, 1023, 15, INTUOS, wacom_intuos_irq }, { "Wacom Intuos2 12x12", 10, 30480, 31680, 1023, 15, INTUOS, wacom_intuos_irq }, { "Wacom Intuos2 12x18", 10, 45720, 31680, 1023, 15, INTUOS, wacom_intuos_irq }, - { "Wacom Volito", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_graphire_irq }, - { "Wacom Cintiq Partner",8, 20480, 15360, 511, 32, PL, wacom_ptu_irq }, { "Wacom Intuos3 4x5", 10, 25400, 20320, 1023, 15, INTUOS3, wacom_intuos_irq }, { "Wacom Intuos3 6x8", 10, 40640, 30480, 1023, 15, INTUOS3, wacom_intuos_irq }, { "Wacom Intuos3 9x12", 10, 60960, 45720, 1023, 15, INTUOS3, wacom_intuos_irq }, + { "Wacom Intuos3 6x11", 10, 54204, 31750, 1023, 15, INTUOS3, wacom_intuos_irq }, { "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 15, CINTIQ, wacom_intuos_irq }, { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_intuos_irq }, { } @@ -688,6 +757,13 @@ static struct usb_device_id wacom_ids[] { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x12) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x13) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x14) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x15) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x63) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x64) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x20) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x21) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x22) }, @@ -699,16 +775,20 @@ static struct usb_device_id wacom_ids[] { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x33) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x34) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x35) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x43) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x44) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x45) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB0) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB1) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB2) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB5) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) }, { } @@ -779,6 +859,13 @@ static int wacom_probe(struct usb_interf input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom->features->pressure_max, 0, 0); switch (wacom->features->type) { + case G4: + input_dev->evbit[0] |= BIT(EV_MSC); + input_dev->mscbit[0] |= BIT(MSC_SERIAL); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER); + input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7); + /* fall through */ + case GRAPHIRE: input_dev->evbit[0] |= BIT(EV_REL); input_dev->relbit[0] |= BIT(REL_WHEEL);