From: Arnaud Patard Here are some cleanups for the s3c2410fb drivers. It : * Removes a buggy call to s3c2410fb_init_registers. There was two calls to this function but the first was done without all initialisations done. No oops but it may confuse some LCDs. * Makes two functions static. Signed-Off-By: Arnaud Patard Signed-Off-By: Antonino Daplas Signed-off-by: Andrew Morton --- drivers/video/s3c2410fb.c | 10 ++++------ 1 files changed, 4 insertions(+), 6 deletions(-) diff -puN drivers/video/s3c2410fb.c~s3c2410fb-cleanup-and-fix drivers/video/s3c2410fb.c --- devel/drivers/video/s3c2410fb.c~s3c2410fb-cleanup-and-fix 2006-01-03 20:00:11.000000000 -0800 +++ devel-akpm/drivers/video/s3c2410fb.c 2006-01-03 20:00:11.000000000 -0800 @@ -552,7 +552,7 @@ static inline void modify_gpio(void __io * s3c2410fb_init_registers - Initialise all LCD-related registers */ -int s3c2410fb_init_registers(struct s3c2410fb_info *fbi) +static int s3c2410fb_init_registers(struct s3c2410fb_info *fbi) { unsigned long flags; @@ -634,7 +634,7 @@ static irqreturn_t s3c2410fb_irq(int irq static char driver_name[]="s3c2410fb"; -int __init s3c2410fb_probe(struct platform_device *pdev) +static int __init s3c2410fb_probe(struct platform_device *pdev) { struct s3c2410fb_info *info; struct fb_info *fbinfo; @@ -667,8 +667,6 @@ int __init s3c2410fb_probe(struct platfo info->fb = fbinfo; platform_set_drvdata(pdev, fbinfo); - s3c2410fb_init_registers(info); - dprintk("devinit\n"); strcpy(fbinfo->fix.id, driver_name); @@ -701,8 +699,8 @@ int __init s3c2410fb_probe(struct platfo fbinfo->var.yres_virtual = mach_info->yres.defval; fbinfo->var.bits_per_pixel = mach_info->bpp.defval; - fbinfo->var.upper_margin = S3C2410_LCDCON2_GET_VBPD(mregs->lcdcon2) +1; - fbinfo->var.lower_margin = S3C2410_LCDCON2_GET_VFPD(mregs->lcdcon2) +1; + fbinfo->var.upper_margin = S3C2410_LCDCON2_GET_VBPD(mregs->lcdcon2) + 1; + fbinfo->var.lower_margin = S3C2410_LCDCON2_GET_VFPD(mregs->lcdcon2) + 1; fbinfo->var.vsync_len = S3C2410_LCDCON2_GET_VSPW(mregs->lcdcon2) + 1; fbinfo->var.left_margin = S3C2410_LCDCON3_GET_HFPD(mregs->lcdcon3) + 1; _