From khali@linux-fr.org Sun Feb 5 14:24:40 2006 Date: Sun, 5 Feb 2006 23:25:25 +0100 From: Jean Delvare To: Greg KH Subject: [PATCH 06/11] w83781d: Document the alarm and beep bits Message-Id: <20060205232525.4a6377e1.khali@linux-fr.org> Content-Disposition: inline; filename=hwmon-w83781d-document-alarm-bits.patch Document the individual alarm and beep bits of the w83781d driver. Ideally we would offer a chip-independant interface for them, but until it's done, it's only fair that we document the current interface. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- Documentation/hwmon/w83781d | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) --- gregkh-2.6.orig/Documentation/hwmon/w83781d +++ gregkh-2.6/Documentation/hwmon/w83781d @@ -123,6 +123,25 @@ When an alarm goes off, you can be warne your computer speaker. It is possible to enable all beeping globally, or only the beeping for some alarms. +Individual alarm and beep bits: + +0x000001: in0 +0x000002: in1 +0x000004: in2 +0x000008: in3 +0x000010: temp1 +0x000020: temp2 (+temp3 on W83781D) +0x000040: fan1 +0x000080: fan2 +0x000100: in4 +0x000200: in5 +0x000400: in6 +0x000800: fan3 +0x001000: chassis +0x002000: temp3 (W83782D and W83627HF only) +0x010000: in7 (W83782D and W83627HF only) +0x020000: in8 (W83782D and W83627HF only) + If an alarm triggers, it will remain triggered until the hardware register is read at least once. This means that the cause for the alarm may already have disappeared! Note that in the current implementation, all