From: Andrew Morton - Clean up a few little layout things and comments. - Add a WARN_ON to a case which I was wondering about. - Tune up some inlines. Cc: Mingming Cao Cc: Badari Pulavarty Signed-off-by: Andrew Morton --- fs/ext3/inode.c | 239 +++++++++++++++++++++------------------------- 1 files changed, 114 insertions(+), 125 deletions(-) diff -puN fs/ext3/inode.c~ext3-cleanups-and-warn_on fs/ext3/inode.c --- devel/fs/ext3/inode.c~ext3-cleanups-and-warn_on 2006-03-11 02:47:09.000000000 -0800 +++ devel-akpm/fs/ext3/inode.c 2006-03-11 02:47:09.000000000 -0800 @@ -44,16 +44,16 @@ static int ext3_writepage_trans_blocks(s /* * Test whether an inode is a fast symlink. */ -static inline int ext3_inode_is_fast_symlink(struct inode *inode) +static int ext3_inode_is_fast_symlink(struct inode *inode) { int ea_blocks = EXT3_I(inode)->i_file_acl ? (inode->i_sb->s_blocksize >> 9) : 0; - return (S_ISLNK(inode->i_mode) && - inode->i_blocks - ea_blocks == 0); + return (S_ISLNK(inode->i_mode) && inode->i_blocks - ea_blocks == 0); } -/* The ext3 forget function must perform a revoke if we are freeing data +/* + * The ext3 forget function must perform a revoke if we are freeing data * which has been journaled. Metadata (eg. indirect blocks) must be * revoked in all cases. * @@ -61,10 +61,8 @@ static inline int ext3_inode_is_fast_sym * but there may still be a record of it in the journal, and that record * still needs to be revoked. */ - -int ext3_forget(handle_t *handle, int is_metadata, - struct inode *inode, struct buffer_head *bh, - int blocknr) +int ext3_forget(handle_t *handle, int is_metadata, struct inode *inode, + struct buffer_head *bh, int blocknr) { int err; @@ -104,10 +102,9 @@ int ext3_forget(handle_t *handle, int is } /* - * Work out how many blocks we need to progress with the next chunk of a + * Work out how many blocks we need to proceed with the next chunk of a * truncate transaction. */ - static unsigned long blocks_for_truncate(struct inode *inode) { unsigned long needed; @@ -141,7 +138,6 @@ static unsigned long blocks_for_truncate * extend fails, we need to propagate the failure up and restart the * transaction in the top-level truncate loop. --sct */ - static handle_t *start_transaction(struct inode *inode) { handle_t *result; @@ -194,9 +190,11 @@ void ext3_delete_inode (struct inode * i handle = start_transaction(inode); if (IS_ERR(handle)) { - /* If we're going to skip the normal cleanup, we still - * need to make sure that the in-core orphan linked list - * is properly cleaned up. */ + /* + * If we're going to skip the normal cleanup, we still need to + * make sure that the in-core orphan linked list is properly + * cleaned up. + */ ext3_orphan_del(NULL, inode); goto no_delete; } @@ -247,7 +245,7 @@ static inline void add_chain(Indirect *p p->bh = bh; } -static inline int verify_chain(Indirect *from, Indirect *to) +static int verify_chain(Indirect *from, Indirect *to) { while (from <= to && from->key == *from->p) from++; @@ -317,7 +315,7 @@ static int ext3_block_to_path(struct ino offsets[n++] = i_block & (ptrs - 1); final = ptrs; } else { - ext3_warning (inode->i_sb, "ext3_block_to_path", "block > big"); + ext3_warning(inode->i_sb, "ext3_block_to_path", "block > big"); } if (boundary) *boundary = final - 1 - (i_block & (ptrs - 1)); @@ -409,7 +407,6 @@ no_block: * * Caller must make sure that @ind is valid and will stay that way. */ - static unsigned long ext3_find_near(struct inode *inode, Indirect *ind) { struct ext3_inode_info *ei = EXT3_I(inode); @@ -419,17 +416,18 @@ static unsigned long ext3_find_near(stru unsigned long colour; /* Try to find previous block */ - for (p = ind->p - 1; p >= start; p--) + for (p = ind->p - 1; p >= start; p--) { if (*p) return le32_to_cpu(*p); + } /* No such thing, so let's try location of indirect block */ if (ind->bh) return ind->bh->b_blocknr; /* - * It is going to be refered from inode itself? OK, just put it into - * the same cylinder group then. + * It is going to be referred to from the inode itself? OK, just put it + * into the same cylinder group then. */ bg_start = (ei->i_block_group * EXT3_BLOCKS_PER_GROUP(inode->i_sb)) + le32_to_cpu(EXT3_SB(inode->i_sb)->s_es->s_first_data_block); @@ -453,7 +451,9 @@ static unsigned long ext3_find_near(stru static unsigned long ext3_find_goal(struct inode *inode, long block, Indirect chain[4], Indirect *partial) { - struct ext3_block_alloc_info *block_i = EXT3_I(inode)->i_block_alloc_info; + struct ext3_block_alloc_info *block_i; + + block_i = EXT3_I(inode)->i_block_alloc_info; /* * try the heuristic for sequential allocation, @@ -466,6 +466,7 @@ static unsigned long ext3_find_goal(stru return ext3_find_near(inode, partial); } + /** * ext3_blks_to_allocate: Look up the block map and count the number * of direct blocks need to be allocated for the given branch. @@ -478,8 +479,7 @@ static unsigned long ext3_find_goal(stru * return the total number of blocks to be allocate, including the * direct and indirect blocks. */ -static int -ext3_blks_to_allocate(Indirect * branch, int k, unsigned long blks, +static int ext3_blks_to_allocate(Indirect *branch, int k, unsigned long blks, int blocks_to_boundary) { unsigned long count = 0; @@ -489,7 +489,7 @@ ext3_blks_to_allocate(Indirect * branch, * then it's clear blocks on that path have not allocated */ if (k > 0) { - /* right now don't hanel cross boundary allocation */ + /* right now we don't handle cross boundary allocation */ if (blks < blocks_to_boundary + 1) count += blks; else @@ -538,7 +538,7 @@ static int ext3_alloc_blocks(handle_t *h while (1) { count = target; /* allocating blocks for indirect blocks and direct blocks */ - current_block = ext3_new_blocks(handle, inode, goal, &count, err); + current_block = ext3_new_blocks(handle,inode,goal,&count,err); if (*err) goto failed_out; @@ -591,7 +591,6 @@ failed_out: * ext3_alloc_block() (normally -ENOSPC). Otherwise we set the chain * as described above and return 0. */ - static int ext3_alloc_branch(handle_t *handle, struct inode *inode, int indirect_blks, int *blks, unsigned long goal, int *offsets, Indirect *branch) @@ -670,27 +669,28 @@ failed: } /** - * ext3_splice_branch - splice the allocated branch onto inode. - * @inode: owner - * @block: (logical) number of block we are adding - * @chain: chain of indirect blocks (with a missing link - see - * ext3_alloc_branch) - * @where: location of missing link - * @num: number of indirect blocks we are adding - * @blks: number of direct blocks we are adding - * - * This function fills the missing link and does all housekeeping needed in - * inode (->i_blocks, etc.). In case of success we end up with the full - * chain to new block and return 0. + * ext3_splice_branch - splice the allocated branch onto inode. + * @inode: owner + * @block: (logical) number of block we are adding + * @chain: chain of indirect blocks (with a missing link - see + * ext3_alloc_branch) + * @where: location of missing link + * @num: number of indirect blocks we are adding + * @blks: number of direct blocks we are adding + * + * This function fills the missing link and does all housekeeping needed in + * inode (->i_blocks, etc.). In case of success we end up with the full + * chain to new block and return 0. */ - -static int ext3_splice_branch(handle_t *handle, struct inode *inode, long block, - Indirect *where, int num, int blks) +static int ext3_splice_branch(handle_t *handle, struct inode *inode, + long block, Indirect *where, int num, int blks) { int i; int err = 0; - struct ext3_block_alloc_info *block_i = EXT3_I(inode)->i_block_alloc_info; + struct ext3_block_alloc_info *block_i; unsigned long current_block; + + block_i = EXT3_I(inode)->i_block_alloc_info; /* * If we're splicing into a [td]indirect block (as opposed to the * inode) then we need to get write access to the [td]indirect block @@ -705,8 +705,11 @@ static int ext3_splice_branch(handle_t * /* That's it */ *where->p = where->key; - /* update host bufferhead or inode to point to - * more just allocated direct blocks blocks */ + + /* + * Update the host buffer_head or inode to point to more just allocated + * direct blocks blocks + */ if (num == 0 && blks > 1) { current_block = le32_to_cpu(where->key + 1); for (i = 1; i < blks; i++) @@ -720,7 +723,8 @@ static int ext3_splice_branch(handle_t * */ if (block_i) { block_i->last_alloc_logical_block = block + blks - 1; - block_i->last_alloc_physical_block = le32_to_cpu(where[num].key + blks - 1); + block_i->last_alloc_physical_block = + le32_to_cpu(where[num].key + blks - 1); } /* We are done with atomic stuff, now do the rest of housekeeping */ @@ -731,7 +735,7 @@ static int ext3_splice_branch(handle_t * /* had we spliced it onto indirect block? */ if (where->bh) { /* - * akpm: If we spliced it onto an indirect block, we haven't + * If we spliced it onto an indirect block, we haven't * altered the inode. Note however that if it is being spliced * onto an indirect block at the very end of the file (the * file is growing) then we *will* alter the inode to reflect @@ -756,7 +760,7 @@ err_out: for (i = 1; i <= num; i++) { BUFFER_TRACE(where[i].bh, "call journal_forget"); ext3_journal_forget(handle, where[i].bh); - ext3_free_blocks(handle, inode, le32_to_cpu(where[i-1].key), 1); + ext3_free_blocks(handle,inode,le32_to_cpu(where[i-1].key),1); } ext3_free_blocks(handle, inode, le32_to_cpu(where[num].key), blks); @@ -775,17 +779,16 @@ err_out: * allocations is needed - we simply release blocks and do not touch anything * reachable from inode. * - * akpm: `handle' can be NULL if create == 0. + * `handle' can be NULL if create == 0. * * The BKL may not be held on entry here. Be sure to take it early. * return > 0, # of blocks mapped or allocated. * return = 0, if plain lookup failed. * return < 0, error case. */ - -int -ext3_get_blocks_handle(handle_t *handle, struct inode *inode, sector_t iblock, - unsigned long maxblocks, struct buffer_head *bh_result, +int ext3_get_blocks_handle(handle_t *handle, struct inode *inode, + sector_t iblock, unsigned long maxblocks, + struct buffer_head *bh_result, int create, int extend_disksize) { int err = -EIO; @@ -802,7 +805,7 @@ ext3_get_blocks_handle(handle_t *handle, J_ASSERT(handle != NULL || create == 0); - depth = ext3_block_to_path(inode, iblock, offsets, &blocks_to_boundary); + depth = ext3_block_to_path(inode,iblock,offsets,&blocks_to_boundary); if (depth == 0) goto out; @@ -998,8 +1001,8 @@ static int ext3_get_block(struct inode * /* * `handle' can be NULL if create is zero */ -struct buffer_head *ext3_getblk(handle_t *handle, struct inode * inode, - long block, int create, int * errp) +struct buffer_head *ext3_getblk(handle_t *handle, struct inode *inode, + long block, int create, int *errp) { struct buffer_head dummy; int fatal = 0, err; @@ -1029,17 +1032,18 @@ struct buffer_head *ext3_getblk(handle_t J_ASSERT(create != 0); J_ASSERT(handle != 0); - /* Now that we do not always journal data, we - should keep in mind whether this should - always journal the new buffer as metadata. - For now, regular file writes use - ext3_get_block instead, so it's not a - problem. */ + /* + * Now that we do not always journal data, we should + * keep in mind whether this should always journal the + * new buffer as metadata. For now, regular file + * writes use ext3_get_block instead, so it's not a + * problem. + */ lock_buffer(bh); BUFFER_TRACE(bh, "call get_create_access"); fatal = ext3_journal_get_create_access(handle, bh); if (!fatal && !buffer_uptodate(bh)) { - memset(bh->b_data, 0, inode->i_sb->s_blocksize); + memset(bh->b_data,0,inode->i_sb->s_blocksize); set_buffer_uptodate(bh); } unlock_buffer(bh); @@ -1061,7 +1065,7 @@ err: return NULL; } -struct buffer_head *ext3_bread(handle_t *handle, struct inode * inode, +struct buffer_head *ext3_bread(handle_t *handle, struct inode *inode, int block, int create, int *err) { struct buffer_head * bh; @@ -1137,9 +1141,8 @@ static int walk_page_buffers( handle_t * * is elevated. We'll still have enough credits for the tiny quotafile * write. */ - -static int do_journal_get_write_access(handle_t *handle, - struct buffer_head *bh) +static int do_journal_get_write_access(handle_t *handle, + struct buffer_head *bh) { if (!buffer_mapped(bh) || buffer_freed(bh)) return 0; @@ -1180,8 +1183,7 @@ out: return ret; } -int -ext3_journal_dirty_data(handle_t *handle, struct buffer_head *bh) +int ext3_journal_dirty_data(handle_t *handle, struct buffer_head *bh) { int err = journal_dirty_data(handle, bh); if (err) @@ -1206,7 +1208,6 @@ static int commit_write_fn(handle_t *han * ext3 never places buffers on inode->i_mapping->private_list. metadata * buffers are managed internally. */ - static int ext3_ordered_commit_write(struct file *file, struct page *page, unsigned from, unsigned to) { @@ -1416,7 +1417,7 @@ static int journal_dirty_data_fn(handle_ * we don't need to open a transaction here. */ static int ext3_ordered_writepage(struct page *page, - struct writeback_control *wbc) + struct writeback_control *wbc) { struct inode *inode = page->mapping->host; struct buffer_head *page_bufs; @@ -1907,11 +1908,8 @@ static inline int all_zeroes(__le32 *p, * c) free the subtrees growing from the inode past the @chain[0]. * (no partially truncated stuff there). */ -static Indirect *ext3_find_shared(struct inode *inode, - int depth, - int offsets[4], - Indirect chain[4], - __le32 *top) +static Indirect *ext3_find_shared(struct inode *inode, int depth, + int offsets[4], Indirect chain[4], __le32 *top) { Indirect *partial, *p; int k, err; @@ -1950,8 +1948,7 @@ static Indirect *ext3_find_shared(struct } /* Writer: end */ - while(partial > p) - { + while(partial > p) { brelse(partial->bh); partial--; } @@ -1967,10 +1964,9 @@ no_top: * We release `count' blocks on disk, but (last - first) may be greater * than `count' because there can be holes in there. */ -static void -ext3_clear_blocks(handle_t *handle, struct inode *inode, struct buffer_head *bh, - unsigned long block_to_free, unsigned long count, - __le32 *first, __le32 *last) +static void ext3_clear_blocks(handle_t *handle, struct inode *inode, + struct buffer_head *bh, unsigned long block_to_free, + unsigned long count, __le32 *first, __le32 *last) { __le32 *p; if (try_to_extend_transaction(handle, inode)) { @@ -2231,8 +2227,7 @@ static void ext3_free_branches(handle_t * that's fine - as long as they are linked from the inode, the post-crash * ext3_truncate() run will find them and release them. */ - -void ext3_truncate(struct inode * inode) +void ext3_truncate(struct inode *inode) { handle_t *handle; struct ext3_inode_info *ei = EXT3_I(inode); @@ -2356,29 +2351,26 @@ void ext3_truncate(struct inode * inode) do_indirects: /* Kill the remaining (whole) subtrees */ switch (offsets[0]) { - default: - nr = i_data[EXT3_IND_BLOCK]; - if (nr) { - ext3_free_branches(handle, inode, NULL, - &nr, &nr+1, 1); - i_data[EXT3_IND_BLOCK] = 0; - } - case EXT3_IND_BLOCK: - nr = i_data[EXT3_DIND_BLOCK]; - if (nr) { - ext3_free_branches(handle, inode, NULL, - &nr, &nr+1, 2); - i_data[EXT3_DIND_BLOCK] = 0; - } - case EXT3_DIND_BLOCK: - nr = i_data[EXT3_TIND_BLOCK]; - if (nr) { - ext3_free_branches(handle, inode, NULL, - &nr, &nr+1, 3); - i_data[EXT3_TIND_BLOCK] = 0; - } - case EXT3_TIND_BLOCK: - ; + default: + nr = i_data[EXT3_IND_BLOCK]; + if (nr) { + ext3_free_branches(handle, inode, NULL, &nr, &nr+1, 1); + i_data[EXT3_IND_BLOCK] = 0; + } + case EXT3_IND_BLOCK: + nr = i_data[EXT3_DIND_BLOCK]; + if (nr) { + ext3_free_branches(handle, inode, NULL, &nr, &nr+1, 2); + i_data[EXT3_DIND_BLOCK] = 0; + } + case EXT3_DIND_BLOCK: + nr = i_data[EXT3_TIND_BLOCK]; + if (nr) { + ext3_free_branches(handle, inode, NULL, &nr, &nr+1, 3); + i_data[EXT3_TIND_BLOCK] = 0; + } + case EXT3_TIND_BLOCK: + ; } ext3_discard_reservation(inode); @@ -2387,8 +2379,10 @@ do_indirects: inode->i_mtime = inode->i_ctime = CURRENT_TIME_SEC; ext3_mark_inode_dirty(handle, inode); - /* In a multi-transaction truncate, we only make the final - * transaction synchronous */ + /* + * In a multi-transaction truncate, we only make the final transaction + * synchronous + */ if (IS_SYNC(inode)) handle->h_sync = 1; out_stop: @@ -2414,20 +2408,16 @@ static unsigned long ext3_get_inode_bloc struct ext3_group_desc * gdp; - if ((ino != EXT3_ROOT_INO && - ino != EXT3_JOURNAL_INO && - ino != EXT3_RESIZE_INO && - ino < EXT3_FIRST_INO(sb)) || - ino > le32_to_cpu( - EXT3_SB(sb)->s_es->s_inodes_count)) { - ext3_error (sb, "ext3_get_inode_block", + if ((ino != EXT3_ROOT_INO && ino != EXT3_JOURNAL_INO && + ino != EXT3_RESIZE_INO && ino < EXT3_FIRST_INO(sb)) || + ino > le32_to_cpu(EXT3_SB(sb)->s_es->s_inodes_count)) { + ext3_error(sb, "ext3_get_inode_block", "bad inode number: %lu", ino); return 0; } block_group = (ino - 1) / EXT3_INODES_PER_GROUP(sb); if (block_group >= EXT3_SB(sb)->s_groups_count) { - ext3_error (sb, "ext3_get_inode_block", - "group >= groups count"); + ext3_error(sb,"ext3_get_inode_block","group >= groups count"); return 0; } smp_rmb(); @@ -2440,7 +2430,7 @@ static unsigned long ext3_get_inode_bloc return 0; } - gdp = (struct ext3_group_desc *) bh->b_data; + gdp = (struct ext3_group_desc *)bh->b_data; /* * Figure out the offset within the block group inode table */ @@ -2989,7 +2979,7 @@ err_out: /* - * akpm: how many blocks doth make a writepage()? + * How many blocks doth make a writepage()? * * With N blocks per page, it may be: * N data blocks @@ -3079,8 +3069,8 @@ ext3_reserve_inode_write(handle_t *handl } /* - * akpm: What we do here is to mark the in-core inode as clean - * with respect to inode dirtiness (it may still be data-dirty). + * What we do here is to mark the in-core inode as clean with respect to inode + * dirtiness (it may still be data-dirty). * This means that the in-core inode may be reaped by prune_icache * without having to perform any I/O. This is a very good thing, * because *any* task may call prune_icache - even ones which @@ -3112,7 +3102,7 @@ int ext3_mark_inode_dirty(handle_t *hand } /* - * akpm: ext3_dirty_inode() is called from __mark_inode_dirty() + * ext3_dirty_inode() is called from __mark_inode_dirty() * * We're really interested in the case where a file is being extended. * i_size has been changed by generic_commit_write() and we thus need @@ -3148,7 +3138,7 @@ out: return; } -#ifdef AKPM +#if 0 /* * Bind an inode's backing buffer_head into this transaction, to prevent * it from being flushed to disk early. Unlike @@ -3156,8 +3146,7 @@ out: * returns no iloc structure, so the caller needs to repeat the iloc * lookup to mark the inode dirty later. */ -static inline int -ext3_pin_inode(handle_t *handle, struct inode *inode) +static int ext3_pin_inode(handle_t *handle, struct inode *inode) { struct ext3_iloc iloc; _