GIT ddc5d3414593e4d7ad7fbd33e7f7517fcc234544 git+ssh://master.kernel.org/pub/scm/linux/kernel/git/dtor/input.git commit ddc5d3414593e4d7ad7fbd33e7f7517fcc234544 Author: Dmitry Torokhov Date: Wed Apr 26 00:14:19 2006 -0400 Input: move input_device_id to mod_devicetable.h Signed-off-by: Dmitry Torokhov commit 77426d7210430b70a7f5b21c05c4e7505528937d Author: Samuel Thibault Date: Wed Apr 26 00:14:10 2006 -0400 Input: allow using several chords for braille For coping with bad keyboards, permit to type a braille pattern by pressing several chords. By default, only one chord is needed. Signed-off-by: Samuel Thibault Signed-off-by: Dmitry Torokhov commit 1a0ccece05efb8a9c04b1130c24a2652239f3bea Author: Dmitry Torokhov Date: Wed Apr 26 00:13:57 2006 -0400 Input: allow passing NULL to input_free_device() Many drivers rely on input_free_device() behaving like kfree(). Signed-off-by: Dmitry Torokhov commit f11a7c0935637c15416679bd347bbc4eac1ca740 Author: Richard Purdie Date: Wed Apr 26 00:13:42 2006 -0400 Input: spitzkbd - fix the reversed Address and Calender keys Signed-off-by: Richard Purdie Signed-off-by: Dmitry Torokhov commit d5b415c95f0e6510451f1446cea832c1f77bd7ea Author: Imre Deak Date: Wed Apr 26 00:13:18 2006 -0400 Input: ads7846 - improve filtering for thumb press accuracy Providing more accurate coordinates for thumb press requires additional steps in the filtering logic: - Ignore samples found invalid by the debouncing logic, or the ones that have out of bound pressure value. - Add a parameter to repeat debouncing, so that more then two consecutive good readings are required for a valid sample. Signed-off-by: Imre Deak Acked-by: Juha Yrjola Signed-off-by: Dmitry Torokhov commit ae82d5ab05068fccef2329f4607670f24c41606f Author: Imre Deak Date: Wed Apr 26 00:12:14 2006 -0400 Input: ads7846 - report 0 pressure value along with pen up event X touchscreen drivers that don't interpret the designated pen up message assume a pen up event from a pressure value 0. For these we generate a pressure 0 message along with the pen up message. Signed-off-by: Imre Deak Acked-by: Juha Yrjola Signed-off-by: Dmitry Torokhov commit c9e617a563ad646239270fa2222cdb06966cf1fa Author: Imre Deak Date: Tue Apr 11 23:44:05 2006 -0400 Input: ads7846 - handle IRQs that were latched during disabled IRQs The pen down IRQ will toggle during each X,Y,Z measurement cycle. Even though the IRQ is disabled it will be latched and delivered when after enable_irq. Thus in the IRQ handler we must avoid starting a new measurement cycle when such an "unwanted" IRQ happens. Add a get_pendown_state platform function, which will probably determine this by reading the current GPIO level of the pen IRQ pin. Move the IRQ reenabling from the SPI RX function to the timer. After the last power down message the pen IRQ pin is still active for a while and get_pendown_state would report incorrectly a pen down state. When suspending we should check the ts->pending flag instead of ts->pendown, since the timer can be pending regardless of ts->pendown. Also if ts->pending is set we can be sure that the timer is running, so no need to rearm it. Similarly if ts->pending is not set we can be sure that the IRQ is enabled (and the timer is not). Signed-off-by: Imre Deak Signed-off-by: David Brownell Signed-off-by: Dmitry Torokhov commit 7de90a8cb9c51145d7f60d8db17ce0fa07d1b281 Author: Imre Deak Date: Tue Apr 11 23:43:55 2006 -0400 Input: ads7846 - miscellaneous fixes - Add disable attribute to support device locking mode where unintentional touch event shouldn't wake up the system; - Update comments; - Add missing spin_lock_init; - Do device resume with the lock held; - Do cleanup calls / free memory in the reverse order of initialization. Signed-off-by: Imre Deak Signed-off-by: David Brownell Signed-off-by: Dmitry Torokhov commit c4febb94dae915da4423b81c487eabed9cef5cba Author: Juha Yrjola Date: Tue Apr 11 23:42:25 2006 -0400 Input: ads7846 - use msleep() instead of udelay() in suspend Sometimes a polling loop had a hard time changing state without pre-emption enabled. Use msleep instead, it's better anyway. Signed-off-by: Juha Yrjola Signed-off-by: David Brownell Signed-off-by: Dmitry Torokhov commit 0b7018aae7e1798f55f736b9a77c201708aa0e33 Author: Imre Deak Date: Tue Apr 11 23:42:03 2006 -0400 Input: ads7846 - debouncing and rudimentary sample filtering Some touchscreens seem to oscillate heavily for a while after touching the screen.  Implement support for sampling the screen until we get two consecutive values that are close enough. Signed-off-by: Imre Deak Signed-off-by: Juha Yrjola Signed-off-by: David Brownell Signed-off-by: Dmitry Torokhov commit 53a0ef89e95c725f3faab98573770aeb7429c1a3 Author: Imre Deak Date: Tue Apr 11 23:41:49 2006 -0400 Input: ads7846 - power down ADC a bit later Submit a seperate request for powering down the ADC in ads7846, doing it after the last read request. Otherwise some of the read values are incorrect. Signed-off-by: Imre Deak Signed-off-by: Juha Yrjola Signed-off-by: David Brownell Signed-off-by: Dmitry Torokhov commit 438f2a7401ec5d8f85923a7c3e6da444f097a3a1 Author: Imre Deak Date: Tue Apr 11 23:41:32 2006 -0400 Input: ads7846 - add pen_down sysfs attribute It's handy for userspace diagnostics to see the pen down status, to see whether the touchscreen is "stuck" (shortcircuited). Signed-off-by: Imre Deak Signed-off-by: Juha Yrjola Signed-off-by: David Brownell Signed-off-by: Dmitry Torokhov commit e2aa507a837cbaa376faa3d9f8448ff569d34ccf Author: John Reed Riley Date: Wed Apr 5 00:40:01 2006 -0400 Input: wistron - add support for Fujitsu N3510 Signed-off-by: Dmitry Torokhov commit 8a1b170898cd827b24cbf02c43c57f8489e9ccce Author: Stefan Rompf Date: Wed Apr 5 00:39:20 2006 -0400 Input: wistron - add signature for Amilo M7400 Signed-off-by: Dmitry Torokhov --- diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c index 935670a..5755b7e 100644 --- a/drivers/char/keyboard.c +++ b/drivers/char/keyboard.c @@ -860,9 +860,32 @@ static void k_slock(struct vc_data *vc, } /* by default, 300ms interval for combination release */ -static long brl_timeout = 300; -MODULE_PARM_DESC(brl_timeout, "Braille keys release delay in ms (0 for combination on first release, < 0 for dead characters)"); -module_param(brl_timeout, long, 0644); +static unsigned brl_timeout = 300; +MODULE_PARM_DESC(brl_timeout, "Braille keys release delay in ms (0 for commit on first key release)"); +module_param(brl_timeout, uint, 0644); + +static unsigned brl_nbchords = 1; +MODULE_PARM_DESC(brl_nbchords, "Number of chords that produce a braille pattern (0 for dead chords)"); +module_param(brl_nbchords, uint, 0644); + +static void k_brlcommit(struct vc_data *vc, unsigned int pattern, char up_flag, struct pt_regs *regs) +{ + static unsigned long chords; + static unsigned committed; + + if (!brl_nbchords) + k_deadunicode(vc, BRL_UC_ROW | pattern, up_flag, regs); + else { + committed |= pattern; + chords++; + if (chords == brl_nbchords) { + k_unicode(vc, BRL_UC_ROW | committed, up_flag, regs); + chords = 0; + committed = 0; + } + } +} + static void k_brl(struct vc_data *vc, unsigned char value, char up_flag, struct pt_regs *regs) { static unsigned pressed,committing; @@ -882,11 +905,6 @@ static void k_brl(struct vc_data *vc, un if (value > 8) return; - if (brl_timeout < 0) { - k_deadunicode(vc, BRL_UC_ROW | (1 << (value - 1)), up_flag, regs); - return; - } - if (up_flag) { if (brl_timeout) { if (!committing || @@ -897,13 +915,13 @@ static void k_brl(struct vc_data *vc, un pressed &= ~(1 << (value - 1)); if (!pressed) { if (committing) { - k_unicode(vc, BRL_UC_ROW | committing, 0, regs); + k_brlcommit(vc, committing, 0, regs); committing = 0; } } } else { if (committing) { - k_unicode(vc, BRL_UC_ROW | committing, 0, regs); + k_brlcommit(vc, committing, 0, regs); committing = 0; } pressed &= ~(1 << (value - 1)); diff --git a/drivers/input/input.c b/drivers/input/input.c index a935abe..591c70d 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -286,19 +286,19 @@ static struct input_device_id *input_mat for (; id->flags || id->driver_info; id++) { if (id->flags & INPUT_DEVICE_ID_MATCH_BUS) - if (id->id.bustype != dev->id.bustype) + if (id->bustype != dev->id.bustype) continue; if (id->flags & INPUT_DEVICE_ID_MATCH_VENDOR) - if (id->id.vendor != dev->id.vendor) + if (id->vendor != dev->id.vendor) continue; if (id->flags & INPUT_DEVICE_ID_MATCH_PRODUCT) - if (id->id.product != dev->id.product) + if (id->product != dev->id.product) continue; if (id->flags & INPUT_DEVICE_ID_MATCH_VERSION) - if (id->id.version != dev->id.version) + if (id->version != dev->id.version) continue; MATCH_BIT(evbit, EV_MAX); diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c index bc61cf8..1d238a9 100644 --- a/drivers/input/keyboard/spitzkbd.c +++ b/drivers/input/keyboard/spitzkbd.c @@ -53,8 +53,8 @@ static unsigned char spitzkbd_keycode[NR KEY_LEFTCTRL, KEY_1, KEY_3, KEY_5, KEY_6, KEY_7, KEY_9, KEY_0, KEY_BACKSPACE, SPITZ_KEY_EXOK, SPITZ_KEY_EXCANCEL, 0, 0, 0, 0, 0, /* 1-16 */ 0, KEY_2, KEY_4, KEY_R, KEY_Y, KEY_8, KEY_I, KEY_O, KEY_P, SPITZ_KEY_EXJOGDOWN, SPITZ_KEY_EXJOGUP, 0, 0, 0, 0, 0, /* 17-32 */ KEY_TAB, KEY_Q, KEY_E, KEY_T, KEY_G, KEY_U, KEY_J, KEY_K, 0, 0, 0, 0, 0, 0, 0, 0, /* 33-48 */ - SPITZ_KEY_CALENDER, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0, /* 49-64 */ - SPITZ_KEY_ADDRESS, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0, /* 65-80 */ + SPITZ_KEY_ADDRESS, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0, /* 49-64 */ + SPITZ_KEY_CALENDER, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0, /* 65-80 */ SPITZ_KEY_MAIL, KEY_Z, KEY_X, KEY_MINUS, KEY_SPACE, KEY_COMMA, 0, KEY_UP, 0, 0, SPITZ_KEY_FN, 0, 0, 0, 0, 0, /* 81-96 */ KEY_SYSRQ, SPITZ_KEY_JAP1, SPITZ_KEY_JAP2, SPITZ_KEY_CANCEL, SPITZ_KEY_OK, SPITZ_KEY_MENU, KEY_LEFT, KEY_DOWN, KEY_RIGHT, 0, 0, 0, 0, 0, 0, 0 /* 97-112 */ }; diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c index 4b415d9..36cd2e0 100644 --- a/drivers/input/misc/wistron_btns.c +++ b/drivers/input/misc/wistron_btns.c @@ -273,6 +273,18 @@ static struct key_entry keymap_fs_amilo_ { KE_END, 0 } }; +static struct key_entry keymap_fujitsu_n3510[] = { + { KE_KEY, 0x11, KEY_PROG1 }, + { KE_KEY, 0x12, KEY_PROG2 }, + { KE_KEY, 0x36, KEY_WWW }, + { KE_KEY, 0x31, KEY_MAIL }, + { KE_KEY, 0x71, KEY_STOPCD }, + { KE_KEY, 0x72, KEY_PLAYPAUSE }, + { KE_KEY, 0x74, KEY_REWIND }, + { KE_KEY, 0x78, KEY_FORWARD }, + { KE_END, 0 } +}; + static struct key_entry keymap_wistron_ms2141[] = { { KE_KEY, 0x11, KEY_PROG1 }, { KE_KEY, 0x12, KEY_PROG2 }, @@ -323,6 +335,24 @@ static struct dmi_system_id dmi_ids[] = }, { .callback = dmi_matched, + .ident = "Fujitsu-Siemens Amilo M7400", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO M "), + }, + .driver_data = keymap_fs_amilo_pro_v2000 + }, + { + .callback = dmi_matched, + .ident = "Fujitsu N3510", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "N3510"), + }, + .driver_data = keymap_fujitsu_n3510 + }, + { + .callback = dmi_matched, .ident = "Acer Aspire 1500", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 46d1fec..1494175 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -2,6 +2,8 @@ * ADS7846 based touchscreen and sensor driver * * Copyright (c) 2005 David Brownell + * Copyright (c) 2006 Nokia Corporation + * Various changes: Imre Deak * * Using code from: * - corgi_ts.c @@ -34,17 +36,25 @@ /* - * This code has been lightly tested on an ads7846. + * This code has been tested on an ads7846 / N770 device. * Support for ads7843 and ads7845 has only been stubbed in. * - * Not yet done: investigate the values reported. Are x/y/pressure - * event values sane enough for X11? How accurate are the temperature - * and voltage readings? (System-specific calibration should support + * Not yet done: How accurate are the temperature and voltage + * readings? (System-specific calibration should support * accuracy of 0.3 degrees C; otherwise it's 2.0 degrees.) * + * IRQ handling needs a workaround because of a shortcoming in handling + * edge triggered IRQs on some platforms like the OMAP1/2. These + * platforms don't handle the ARM lazy IRQ disabling properly, thus we + * have to maintain our own SW IRQ disabled status. This should be + * removed as soon as the affected platform's IRQ handling is fixed. + * * app note sbaa036 talks in more detail about accurate sampling... * that ought to help in situations like LCDs inducing noise (which * can also be helped by using synch signals) and more generally. + * This driver tries to utilize the measures described in the app + * note. The strength of filtering can be set in the board-* specific + * files. */ #define TS_POLL_PERIOD msecs_to_jiffies(10) @@ -61,6 +71,7 @@ struct ts_event { __be16 x; __be16 y; __be16 z1, z2; + int ignore; }; struct ads7846 { @@ -71,12 +82,23 @@ struct ads7846 { u16 model; u16 vref_delay_usecs; u16 x_plate_ohms; + u16 pressure_max; - u8 read_x, read_y, read_z1, read_z2; + u8 read_x, read_y, read_z1, read_z2, pwrdown; + u16 dummy; /* for the pwrdown read */ struct ts_event tc; - struct spi_transfer xfer[8]; - struct spi_message msg; + struct spi_transfer xfer[10]; + struct spi_message msg[5]; + struct spi_message *last_msg; + int msg_idx; + int read_cnt; + int read_rep; + int last_read; + + u16 debounce_max; + u16 debounce_tol; + u16 debounce_rep; spinlock_t lock; struct timer_list timer; /* P: lock */ @@ -84,6 +106,9 @@ struct ads7846 { unsigned pending:1; /* P: lock */ // FIXME remove "irq_disabled" unsigned irq_disabled:1; /* P: lock */ + unsigned disabled:1; + + int (*get_pendown_state)(void); }; /* leave chip selected when we're done, for quicker re-select? */ @@ -125,7 +150,9 @@ struct ads7846 { #define READ_Y (READ_12BIT_DFR(y) | ADS_PD10_ADC_ON) #define READ_Z1 (READ_12BIT_DFR(z1) | ADS_PD10_ADC_ON) #define READ_Z2 (READ_12BIT_DFR(z2) | ADS_PD10_ADC_ON) -#define READ_X (READ_12BIT_DFR(x) | ADS_PD10_PDOWN) /* LAST */ + +#define READ_X (READ_12BIT_DFR(x) | ADS_PD10_ADC_ON) +#define PWRDOWN (READ_12BIT_DFR(y) | ADS_PD10_PDOWN) /* LAST */ /* single-ended samples need to first power up reference voltage; * we leave both ADC and VREF powered @@ -152,6 +179,15 @@ struct ser_req { struct spi_transfer xfer[6]; }; +static void ads7846_enable(struct ads7846 *ts); +static void ads7846_disable(struct ads7846 *ts); + +static int device_suspended(struct device *dev) +{ + struct ads7846 *ts = dev_get_drvdata(dev); + return dev->power.power_state.event != PM_EVENT_ON || ts->disabled; +} + static int ads7846_read12_ser(struct device *dev, unsigned command) { struct spi_device *spi = to_spi_device(dev); @@ -164,7 +200,7 @@ static int ads7846_read12_ser(struct dev if (!req) return -ENOMEM; - INIT_LIST_HEAD(&req->msg.transfers); + spi_message_init(&req->msg); /* activate reference, so it has time to settle; */ req->ref_on = REF_ON; @@ -204,8 +240,10 @@ static int ads7846_read12_ser(struct dev for (i = 0; i < 6; i++) spi_message_add_tail(&req->xfer[i], &req->msg); + ts->irq_disabled = 1; disable_irq(spi->irq); status = spi_sync(spi, &req->msg); + ts->irq_disabled = 0; enable_irq(spi->irq); if (req->msg.status) @@ -233,6 +271,52 @@ SHOW(temp1) SHOW(vaux) SHOW(vbatt) +static int is_pen_down(struct device *dev) +{ + struct ads7846 *ts = dev_get_drvdata(dev); + + return ts->pendown; +} + +static ssize_t ads7846_pen_down_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%u\n", is_pen_down(dev)); +} + +static DEVICE_ATTR(pen_down, S_IRUGO, ads7846_pen_down_show, NULL); + +static ssize_t ads7846_disable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ads7846 *ts = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", ts->disabled); +} + +static ssize_t ads7846_disable_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ads7846 *ts = dev_get_drvdata(dev); + char *endp; + int i; + + i = simple_strtoul(buf, &endp, 10); + spin_lock_irq(&ts->lock); + + if (i) + ads7846_disable(ts); + else + ads7846_enable(ts); + + spin_unlock_irq(&ts->lock); + + return count; +} + +static DEVICE_ATTR(disable, 0664, ads7846_disable_show, ads7846_disable_store); + /*--------------------------------------------------------------------------*/ /* @@ -264,7 +348,7 @@ static void ads7846_rx(void *ads) if (x == MAX_12BIT) x = 0; - if (x && z1 && ts->spi->dev.power.power_state.event == PM_EVENT_ON) { + if (likely(x && z1 && !device_suspended(&ts->spi->dev))) { /* compute touch pressure resistance using equation #2 */ Rt = z2; Rt -= z1; @@ -275,6 +359,14 @@ static void ads7846_rx(void *ads) } else Rt = 0; + /* Sample found inconsistent by debouncing or pressure is beyond + * the maximum. Don't report it to user space, repeat at least + * once more the measurement */ + if (ts->tc.ignore || Rt > ts->pressure_max) { + mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD); + return; + } + /* NOTE: "pendown" is inferred from pressure; we don't rely on * being able to check nPENIRQ status, or "friendly" trigger modes * (both-edges is much better than just-falling or low-level). @@ -296,11 +388,13 @@ static void ads7846_rx(void *ads) if (Rt) { input_report_abs(input_dev, ABS_X, x); input_report_abs(input_dev, ABS_Y, y); - input_report_abs(input_dev, ABS_PRESSURE, Rt); sync = 1; } - if (sync) + + if (sync) { + input_report_abs(input_dev, ABS_PRESSURE, Rt); input_sync(input_dev); + } #ifdef VERBOSE if (Rt || ts->pendown) @@ -308,80 +402,138 @@ static void ads7846_rx(void *ads) x, y, Rt, Rt ? "" : " UP"); #endif - /* don't retrigger while we're suspended */ spin_lock_irqsave(&ts->lock, flags); ts->pendown = (Rt != 0); - ts->pending = 0; + mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD); + + spin_unlock_irqrestore(&ts->lock, flags); +} + +static void ads7846_debounce(void *ads) +{ + struct ads7846 *ts = ads; + struct spi_message *m; + struct spi_transfer *t; + int val; + int status; + + m = &ts->msg[ts->msg_idx]; + t = list_entry(m->transfers.prev, struct spi_transfer, transfer_list); + val = (*(u16 *)t->rx_buf) >> 3; + if (!ts->read_cnt || (abs(ts->last_read - val) > ts->debounce_tol)) { + /* Repeat it, if this was the first read or the read + * wasn't consistent enough. */ + if (ts->read_cnt < ts->debounce_max) { + ts->last_read = val; + ts->read_cnt++; + } else { + /* Maximum number of debouncing reached and still + * not enough number of consistent readings. Abort + * the whole sample, repeat it in the next sampling + * period. + */ + ts->tc.ignore = 1; + ts->read_cnt = 0; + /* Last message will contain ads7846_rx() as the + * completion function. + */ + m = ts->last_msg; + } + /* Start over collecting consistent readings. */ + ts->read_rep = 0; + } else { + if (++ts->read_rep > ts->debounce_rep) { + /* Got a good reading for this coordinate, + * go for the next one. */ + ts->tc.ignore = 0; + ts->msg_idx++; + ts->read_cnt = 0; + ts->read_rep = 0; + m++; + } else + /* Read more values that are consistent. */ + ts->read_cnt++; + } + status = spi_async(ts->spi, m); + if (status) + dev_err(&ts->spi->dev, "spi_async --> %d\n", + status); +} - if (ts->spi->dev.power.power_state.event == PM_EVENT_ON) { - if (ts->pendown) - mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD); - else if (ts->irq_disabled) { +static void ads7846_timer(unsigned long handle) +{ + struct ads7846 *ts = (void *)handle; + int status = 0; + + spin_lock_irq(&ts->lock); + + if (unlikely(ts->msg_idx && !ts->pendown)) { + /* measurment cycle ended */ + if (!device_suspended(&ts->spi->dev)) { ts->irq_disabled = 0; enable_irq(ts->spi->irq); } + ts->pending = 0; + ts->msg_idx = 0; + } else { + /* pen is still down, continue with the measurement */ + ts->msg_idx = 0; + status = spi_async(ts->spi, &ts->msg[0]); + if (status) + dev_err(&ts->spi->dev, "spi_async --> %d\n", status); } - spin_unlock_irqrestore(&ts->lock, flags); + spin_unlock_irq(&ts->lock); } -static void ads7846_timer(unsigned long handle) +static irqreturn_t ads7846_irq(int irq, void *handle, struct pt_regs *regs) { - struct ads7846 *ts = (void *)handle; - int status = 0; - unsigned long flags; + struct ads7846 *ts = handle; + unsigned long flags; spin_lock_irqsave(&ts->lock, flags); - if (!ts->pending) { - ts->pending = 1; + if (likely(ts->get_pendown_state())) { if (!ts->irq_disabled) { + /* REVISIT irq logic for many ARM chips has cloned a + * bug wherein disabling an irq in its handler won't + * work;(it's disabled lazily, and too late to work. + * until all their irq logic is fixed, we must shadow + * that state here. + */ ts->irq_disabled = 1; disable_irq(ts->spi->irq); + ts->pending = 1; + mod_timer(&ts->timer, jiffies); } - status = spi_async(ts->spi, &ts->msg); - if (status) - dev_err(&ts->spi->dev, "spi_async --> %d\n", - status); } spin_unlock_irqrestore(&ts->lock, flags); -} -static irqreturn_t ads7846_irq(int irq, void *handle, struct pt_regs *regs) -{ - ads7846_timer((unsigned long) handle); return IRQ_HANDLED; } /*--------------------------------------------------------------------------*/ -static int -ads7846_suspend(struct spi_device *spi, pm_message_t message) +/* Must be called with ts->lock held */ +static void ads7846_disable(struct ads7846 *ts) { - struct ads7846 *ts = dev_get_drvdata(&spi->dev); - unsigned long flags; + if (ts->disabled) + return; - spin_lock_irqsave(&ts->lock, flags); - - spi->dev.power.power_state = message; + ts->disabled = 1; /* are we waiting for IRQ, or polling? */ - if (!ts->pendown) { - if (!ts->irq_disabled) { - ts->irq_disabled = 1; - disable_irq(ts->spi->irq); - } + if (!ts->pending) { + ts->irq_disabled = 1; + disable_irq(ts->spi->irq); } else { - /* polling; force a final SPI completion; - * that will clean things up neatly + /* the timer will run at least once more, and + * leave everything in a clean state, IRQ disabled */ - if (!ts->pending) - mod_timer(&ts->timer, jiffies); - - while (ts->pendown || ts->pending) { - spin_unlock_irqrestore(&ts->lock, flags); - udelay(10); - spin_lock_irqsave(&ts->lock, flags); + while (ts->pending) { + spin_unlock_irq(&ts->lock); + msleep(1); + spin_lock_irq(&ts->lock); } } @@ -389,17 +541,45 @@ ads7846_suspend(struct spi_device *spi, * leave it that way after every request */ - spin_unlock_irqrestore(&ts->lock, flags); +} + +/* Must be called with ts->lock held */ +static void ads7846_enable(struct ads7846 *ts) +{ + if (!ts->disabled) + return; + + ts->disabled = 0; + ts->irq_disabled = 0; + enable_irq(ts->spi->irq); +} + +static int ads7846_suspend(struct spi_device *spi, pm_message_t message) +{ + struct ads7846 *ts = dev_get_drvdata(&spi->dev); + + spin_lock_irq(&ts->lock); + + spi->dev.power.power_state = message; + ads7846_disable(ts); + + spin_unlock_irq(&ts->lock); + return 0; + } static int ads7846_resume(struct spi_device *spi) { struct ads7846 *ts = dev_get_drvdata(&spi->dev); - ts->irq_disabled = 0; - enable_irq(ts->spi->irq); + spin_lock_irq(&ts->lock); + spi->dev.power.power_state = PMSG_ON; + ads7846_enable(ts); + + spin_unlock_irq(&ts->lock); + return 0; } @@ -408,6 +588,7 @@ static int __devinit ads7846_probe(struc struct ads7846 *ts; struct input_dev *input_dev; struct ads7846_platform_data *pdata = spi->dev.platform_data; + struct spi_message *m; struct spi_transfer *x; int err; @@ -428,6 +609,11 @@ static int __devinit ads7846_probe(struc return -EINVAL; } + if (pdata->get_pendown_state == NULL) { + dev_dbg(&spi->dev, "no get_pendown_state function?\n"); + return -EINVAL; + } + /* We'd set the wordsize to 12 bits ... except that some controllers * will then treat the 8 bit command words as 12 bits (and drop the * four MSBs of the 12 bit result). Result: inputs must be shifted @@ -451,9 +637,21 @@ static int __devinit ads7846_probe(struc ts->timer.data = (unsigned long) ts; ts->timer.function = ads7846_timer; + spin_lock_init(&ts->lock); + ts->model = pdata->model ? : 7846; ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100; ts->x_plate_ohms = pdata->x_plate_ohms ? : 400; + ts->pressure_max = pdata->pressure_max ? : ~0; + if (pdata->debounce_max) { + ts->debounce_max = pdata->debounce_max; + ts->debounce_tol = pdata->debounce_tol; + ts->debounce_rep = pdata->debounce_rep; + if (ts->debounce_rep > ts->debounce_max + 1) + ts->debounce_rep = ts->debounce_max - 1; + } else + ts->debounce_tol = ~0; + ts->get_pendown_state = pdata->get_pendown_state; snprintf(ts->phys, sizeof(ts->phys), "%s/input0", spi->dev.bus_id); @@ -477,60 +675,100 @@ static int __devinit ads7846_probe(struc /* set up the transfers to read touchscreen state; this assumes we * use formula #2 for pressure, not #3. */ - INIT_LIST_HEAD(&ts->msg.transfers); + m = &ts->msg[0]; x = ts->xfer; + spi_message_init(m); + /* y- still on; turn on only y+ (and ADC) */ ts->read_y = READ_Y; x->tx_buf = &ts->read_y; x->len = 1; - spi_message_add_tail(x, &ts->msg); + spi_message_add_tail(x, m); x++; x->rx_buf = &ts->tc.y; x->len = 2; - spi_message_add_tail(x, &ts->msg); + spi_message_add_tail(x, m); + + m->complete = ads7846_debounce; + m->context = ts; + + m++; + spi_message_init(m); + + /* turn y- off, x+ on, then leave in lowpower */ + x++; + ts->read_x = READ_X; + x->tx_buf = &ts->read_x; + x->len = 1; + spi_message_add_tail(x, m); + + x++; + x->rx_buf = &ts->tc.x; + x->len = 2; + spi_message_add_tail(x, m); + + m->complete = ads7846_debounce; + m->context = ts; /* turn y+ off, x- on; we'll use formula #2 */ if (ts->model == 7846) { + m++; + spi_message_init(m); + x++; ts->read_z1 = READ_Z1; x->tx_buf = &ts->read_z1; x->len = 1; - spi_message_add_tail(x, &ts->msg); + spi_message_add_tail(x, m); x++; x->rx_buf = &ts->tc.z1; x->len = 2; - spi_message_add_tail(x, &ts->msg); + spi_message_add_tail(x, m); + + m->complete = ads7846_debounce; + m->context = ts; + + m++; + spi_message_init(m); x++; ts->read_z2 = READ_Z2; x->tx_buf = &ts->read_z2; x->len = 1; - spi_message_add_tail(x, &ts->msg); + spi_message_add_tail(x, m); x++; x->rx_buf = &ts->tc.z2; x->len = 2; - spi_message_add_tail(x, &ts->msg); + spi_message_add_tail(x, m); + + m->complete = ads7846_debounce; + m->context = ts; } - /* turn y- off, x+ on, then leave in lowpower */ + /* power down */ + m++; + spi_message_init(m); + x++; - ts->read_x = READ_X; - x->tx_buf = &ts->read_x; + ts->pwrdown = PWRDOWN; + x->tx_buf = &ts->pwrdown; x->len = 1; - spi_message_add_tail(x, &ts->msg); + spi_message_add_tail(x, m); x++; - x->rx_buf = &ts->tc.x; + x->rx_buf = &ts->dummy; x->len = 2; CS_CHANGE(*x); - spi_message_add_tail(x, &ts->msg); + spi_message_add_tail(x, m); - ts->msg.complete = ads7846_rx; - ts->msg.context = ts; + m->complete = ads7846_rx; + m->context = ts; + + ts->last_msg = m; if (request_irq(spi->irq, ads7846_irq, SA_SAMPLE_RANDOM | SA_TRIGGER_FALLING, @@ -559,13 +797,27 @@ static int __devinit ads7846_probe(struc device_create_file(&spi->dev, &dev_attr_vbatt); device_create_file(&spi->dev, &dev_attr_vaux); + device_create_file(&spi->dev, &dev_attr_pen_down); + + device_create_file(&spi->dev, &dev_attr_disable); + err = input_register_device(input_dev); if (err) - goto err_free_irq; + goto err_remove_attr; return 0; - err_free_irq: + err_remove_attr: + device_remove_file(&spi->dev, &dev_attr_disable); + device_remove_file(&spi->dev, &dev_attr_pen_down); + if (ts->model == 7846) { + device_remove_file(&spi->dev, &dev_attr_temp1); + device_remove_file(&spi->dev, &dev_attr_temp0); + } + if (ts->model != 7845) + device_remove_file(&spi->dev, &dev_attr_vbatt); + device_remove_file(&spi->dev, &dev_attr_vaux); + free_irq(spi->irq, ts); err_free_mem: input_free_device(input_dev); @@ -577,20 +829,24 @@ static int __devexit ads7846_remove(stru { struct ads7846 *ts = dev_get_drvdata(&spi->dev); + input_unregister_device(ts->input); + ads7846_suspend(spi, PMSG_SUSPEND); - free_irq(ts->spi->irq, ts); - if (ts->irq_disabled) - enable_irq(ts->spi->irq); + device_remove_file(&spi->dev, &dev_attr_disable); + device_remove_file(&spi->dev, &dev_attr_pen_down); if (ts->model == 7846) { - device_remove_file(&spi->dev, &dev_attr_temp0); device_remove_file(&spi->dev, &dev_attr_temp1); + device_remove_file(&spi->dev, &dev_attr_temp0); } if (ts->model != 7845) device_remove_file(&spi->dev, &dev_attr_vbatt); device_remove_file(&spi->dev, &dev_attr_vaux); - input_unregister_device(ts->input); + free_irq(ts->spi->irq, ts); + /* suspend left the IRQ disabled */ + enable_irq(ts->spi->irq); + kfree(ts); dev_dbg(&spi->dev, "unregistered touchscreen\n"); diff --git a/include/linux/input.h b/include/linux/input.h index b0e612d..8298b4b 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -12,8 +12,6 @@ #ifdef __KERNEL__ #include #include -#include -#include #else #include #include @@ -577,15 +575,15 @@ struct input_absinfo { * Switch events */ -#define SW_0 0x00 -#define SW_1 0x01 -#define SW_2 0x02 -#define SW_3 0x03 -#define SW_4 0x04 -#define SW_5 0x05 -#define SW_6 0x06 -#define SW_7 0x07 -#define SW_MAX 0x0f +#define SW_0 0x00 +#define SW_1 0x01 +#define SW_2 0x02 +#define SW_3 0x03 +#define SW_4 0x04 +#define SW_5 0x05 +#define SW_6 0x06 +#define SW_7 0x07 +#define SW_MAX 0x0f /* * Misc events @@ -805,52 +803,16 @@ struct ff_effect { #define FF_MAX 0x7f -struct input_device_id { - - kernel_ulong_t flags; - - struct input_id id; - - kernel_ulong_t evbit[EV_MAX/BITS_PER_LONG+1]; - kernel_ulong_t keybit[KEY_MAX/BITS_PER_LONG+1]; - kernel_ulong_t relbit[REL_MAX/BITS_PER_LONG+1]; - kernel_ulong_t absbit[ABS_MAX/BITS_PER_LONG+1]; - kernel_ulong_t mscbit[MSC_MAX/BITS_PER_LONG+1]; - kernel_ulong_t ledbit[LED_MAX/BITS_PER_LONG+1]; - kernel_ulong_t sndbit[SND_MAX/BITS_PER_LONG+1]; - kernel_ulong_t ffbit[FF_MAX/BITS_PER_LONG+1]; - kernel_ulong_t swbit[SW_MAX/BITS_PER_LONG+1]; - - kernel_ulong_t driver_info; -}; - -/* - * Structure for hotplug & device<->driver matching. - */ - -#define INPUT_DEVICE_ID_MATCH_BUS 1 -#define INPUT_DEVICE_ID_MATCH_VENDOR 2 -#define INPUT_DEVICE_ID_MATCH_PRODUCT 4 -#define INPUT_DEVICE_ID_MATCH_VERSION 8 - -#define INPUT_DEVICE_ID_MATCH_EVBIT 0x010 -#define INPUT_DEVICE_ID_MATCH_KEYBIT 0x020 -#define INPUT_DEVICE_ID_MATCH_RELBIT 0x040 -#define INPUT_DEVICE_ID_MATCH_ABSBIT 0x080 -#define INPUT_DEVICE_ID_MATCH_MSCIT 0x100 -#define INPUT_DEVICE_ID_MATCH_LEDBIT 0x200 -#define INPUT_DEVICE_ID_MATCH_SNDBIT 0x400 -#define INPUT_DEVICE_ID_MATCH_FFBIT 0x800 -#define INPUT_DEVICE_ID_MATCH_SWBIT 0x1000 - #ifdef __KERNEL__ /* * In-kernel definitions. */ +#include #include #include +#include #define NBITS(x) (((x)/BITS_PER_LONG)+1) #define BIT(x) (1UL<<((x)%BITS_PER_LONG)) @@ -951,9 +913,49 @@ struct input_dev { }; #define to_input_dev(d) container_of(d, struct input_dev, cdev) -#define INPUT_DEVICE_ID_MATCH_DEVICE\ +/* + * Verify that we are in sync with input_device_id mod_devicetable.h #defines + */ + +#if EV_MAX != INPUT_DEVICE_ID_EV_MAX +#error "EV_MAX and INPUT_DEVICE_ID_EV_MAX do not match" +#endif + +#if KEY_MAX != INPUT_DEVICE_ID_KEY_MAX +#error "KEY_MAX and INPUT_DEVICE_ID_KEY_MAX do not match" +#endif + +#if REL_MAX != INPUT_DEVICE_ID_REL_MAX +#error "REL_MAX and INPUT_DEVICE_ID_REL_MAX do not match" +#endif + +#if ABS_MAX != INPUT_DEVICE_ID_ABS_MAX +#error "ABS_MAX and INPUT_DEVICE_ID_ABS_MAX do not match" +#endif + +#if MSC_MAX != INPUT_DEVICE_ID_MSC_MAX +#error "MSC_MAX and INPUT_DEVICE_ID_MSC_MAX do not match" +#endif + +#if LED_MAX != INPUT_DEVICE_ID_LED_MAX +#error "LED_MAX and INPUT_DEVICE_ID_LED_MAX do not match" +#endif + +#if SND_MAX != INPUT_DEVICE_ID_SND_MAX +#error "SND_MAX and INPUT_DEVICE_ID_SND_MAX do not match" +#endif + +#if FF_MAX != INPUT_DEVICE_ID_FF_MAX +#error "FF_MAX and INPUT_DEVICE_ID_FF_MAX do not match" +#endif + +#if SW_MAX != INPUT_DEVICE_ID_SW_MAX +#error "SW_MAX and INPUT_DEVICE_ID_SW_MAX do not match" +#endif + +#define INPUT_DEVICE_ID_MATCH_DEVICE \ (INPUT_DEVICE_ID_MATCH_BUS | INPUT_DEVICE_ID_MATCH_VENDOR | INPUT_DEVICE_ID_MATCH_PRODUCT) -#define INPUT_DEVICE_ID_MATCH_DEVICE_AND_VERSION\ +#define INPUT_DEVICE_ID_MATCH_DEVICE_AND_VERSION \ (INPUT_DEVICE_ID_MATCH_DEVICE | INPUT_DEVICE_ID_MATCH_VERSION) struct input_handle; @@ -1016,7 +1018,8 @@ static inline void input_put_device(stru static inline void input_free_device(struct input_dev *dev) { - input_put_device(dev); + if (dev) + input_put_device(dev); } int input_register_device(struct input_dev *); diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 7b08c11..f697770 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -249,4 +249,52 @@ struct i2c_device_id { __u16 id; }; +/* Input */ +#define INPUT_DEVICE_ID_EV_MAX 0x1f +#define INPUT_DEVICE_ID_KEY_MAX 0x1ff +#define INPUT_DEVICE_ID_REL_MAX 0x0f +#define INPUT_DEVICE_ID_ABS_MAX 0x3f +#define INPUT_DEVICE_ID_MSC_MAX 0x07 +#define INPUT_DEVICE_ID_LED_MAX 0x0f +#define INPUT_DEVICE_ID_SND_MAX 0x07 +#define INPUT_DEVICE_ID_FF_MAX 0x7f +#define INPUT_DEVICE_ID_SW_MAX 0x0f + +#define INPUT_DEVICE_ID_MATCH_BUS 1 +#define INPUT_DEVICE_ID_MATCH_VENDOR 2 +#define INPUT_DEVICE_ID_MATCH_PRODUCT 4 +#define INPUT_DEVICE_ID_MATCH_VERSION 8 + +#define INPUT_DEVICE_ID_MATCH_EVBIT 0x0010 +#define INPUT_DEVICE_ID_MATCH_KEYBIT 0x0020 +#define INPUT_DEVICE_ID_MATCH_RELBIT 0x0040 +#define INPUT_DEVICE_ID_MATCH_ABSBIT 0x0080 +#define INPUT_DEVICE_ID_MATCH_MSCIT 0x0100 +#define INPUT_DEVICE_ID_MATCH_LEDBIT 0x0200 +#define INPUT_DEVICE_ID_MATCH_SNDBIT 0x0400 +#define INPUT_DEVICE_ID_MATCH_FFBIT 0x0800 +#define INPUT_DEVICE_ID_MATCH_SWBIT 0x1000 + +struct input_device_id { + + kernel_ulong_t flags; + + __u16 bustype; + __u16 vendor; + __u16 product; + __u16 version; + + kernel_ulong_t evbit[INPUT_DEVICE_ID_EV_MAX / BITS_PER_LONG + 1]; + kernel_ulong_t keybit[INPUT_DEVICE_ID_KEY_MAX / BITS_PER_LONG + 1]; + kernel_ulong_t relbit[INPUT_DEVICE_ID_REL_MAX / BITS_PER_LONG + 1]; + kernel_ulong_t absbit[INPUT_DEVICE_ID_ABS_MAX / BITS_PER_LONG + 1]; + kernel_ulong_t mscbit[INPUT_DEVICE_ID_MSC_MAX / BITS_PER_LONG + 1]; + kernel_ulong_t ledbit[INPUT_DEVICE_ID_LED_MAX / BITS_PER_LONG + 1]; + kernel_ulong_t sndbit[INPUT_DEVICE_ID_SND_MAX / BITS_PER_LONG + 1]; + kernel_ulong_t ffbit[INPUT_DEVICE_ID_FF_MAX / BITS_PER_LONG + 1]; + kernel_ulong_t swbit[INPUT_DEVICE_ID_SW_MAX / BITS_PER_LONG + 1]; + + kernel_ulong_t driver_info; +}; + #endif /* LINUX_MOD_DEVICETABLE_H */ diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h index 72261e0..adb3daf 100644 --- a/include/linux/spi/ads7846.h +++ b/include/linux/spi/ads7846.h @@ -14,5 +14,12 @@ struct ads7846_platform_data { u16 x_min, x_max; u16 y_min, y_max; u16 pressure_min, pressure_max; + + u16 debounce_max; /* max number of additional readings + * per sample */ + u16 debounce_tol; /* tolerance used for filtering */ + u16 debounce_rep; /* additional consecutive good readings + * required after the first two */ + int (*get_pendown_state)(void); }; diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c index 84e2120..37f67c2 100644 --- a/scripts/mod/file2alias.c +++ b/scripts/mod/file2alias.c @@ -374,10 +374,10 @@ static void do_input(char *alias, kernel_ulong_t *arr, unsigned int min, unsigned int max) { unsigned int i; - for (i = min; i < max; i++) { - if (arr[i/BITS_PER_LONG] & (1 << (i%BITS_PER_LONG))) - sprintf(alias+strlen(alias), "%X,*", i); - } + + for (i = min; i < max; i++) + if (arr[i / BITS_PER_LONG] & (1 << (i%BITS_PER_LONG))) + sprintf(alias + strlen(alias), "%X,*", i); } /* input:b0v0p0e0-eXkXrXaXmXlXsXfXwX where X is comma-separated %02X. */ @@ -386,39 +386,37 @@ static int do_input_entry(const char *fi { sprintf(alias, "input:"); - ADD(alias, "b", id->flags&INPUT_DEVICE_ID_MATCH_BUS, id->id.bustype); - ADD(alias, "v", id->flags&INPUT_DEVICE_ID_MATCH_VENDOR, id->id.vendor); - ADD(alias, "p", id->flags&INPUT_DEVICE_ID_MATCH_PRODUCT, - id->id.product); - ADD(alias, "e", id->flags&INPUT_DEVICE_ID_MATCH_VERSION, - id->id.version); + ADD(alias, "b", id->flags & INPUT_DEVICE_ID_MATCH_BUS, id->bustype); + ADD(alias, "v", id->flags & INPUT_DEVICE_ID_MATCH_VENDOR, id->vendor); + ADD(alias, "p", id->flags & INPUT_DEVICE_ID_MATCH_PRODUCT, id->product); + ADD(alias, "e", id->flags & INPUT_DEVICE_ID_MATCH_VERSION, id->version); sprintf(alias + strlen(alias), "-e*"); - if (id->flags&INPUT_DEVICE_ID_MATCH_EVBIT) + if (id->flags & INPUT_DEVICE_ID_MATCH_EVBIT) do_input(alias, id->evbit, 0, EV_MAX); sprintf(alias + strlen(alias), "k*"); - if (id->flags&INPUT_DEVICE_ID_MATCH_KEYBIT) + if (id->flags & INPUT_DEVICE_ID_MATCH_KEYBIT) do_input(alias, id->keybit, KEY_MIN_INTERESTING, KEY_MAX); sprintf(alias + strlen(alias), "r*"); - if (id->flags&INPUT_DEVICE_ID_MATCH_RELBIT) + if (id->flags & INPUT_DEVICE_ID_MATCH_RELBIT) do_input(alias, id->relbit, 0, REL_MAX); sprintf(alias + strlen(alias), "a*"); - if (id->flags&INPUT_DEVICE_ID_MATCH_ABSBIT) + if (id->flags & INPUT_DEVICE_ID_MATCH_ABSBIT) do_input(alias, id->absbit, 0, ABS_MAX); sprintf(alias + strlen(alias), "m*"); - if (id->flags&INPUT_DEVICE_ID_MATCH_MSCIT) + if (id->flags & INPUT_DEVICE_ID_MATCH_MSCIT) do_input(alias, id->mscbit, 0, MSC_MAX); sprintf(alias + strlen(alias), "l*"); - if (id->flags&INPUT_DEVICE_ID_MATCH_LEDBIT) + if (id->flags & INPUT_DEVICE_ID_MATCH_LEDBIT) do_input(alias, id->ledbit, 0, LED_MAX); sprintf(alias + strlen(alias), "s*"); - if (id->flags&INPUT_DEVICE_ID_MATCH_SNDBIT) + if (id->flags & INPUT_DEVICE_ID_MATCH_SNDBIT) do_input(alias, id->sndbit, 0, SND_MAX); sprintf(alias + strlen(alias), "f*"); - if (id->flags&INPUT_DEVICE_ID_MATCH_FFBIT) + if (id->flags & INPUT_DEVICE_ID_MATCH_FFBIT) do_input(alias, id->ffbit, 0, FF_MAX); sprintf(alias + strlen(alias), "w*"); - if (id->flags&INPUT_DEVICE_ID_MATCH_SWBIT) + if (id->flags & INPUT_DEVICE_ID_MATCH_SWBIT) do_input(alias, id->swbit, 0, SW_MAX); return 1; }