GIT 916a3d5729c8b710d56acf579f3fdb4de7c03e77 git+ssh://master.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc.git commit ac325acd50013fa8f4953208cbb96504dec9b12a Author: Linas Vepstas Date: Tue Apr 18 21:05:21 2006 -0700 [PATCH] powerpc/pseries: clear PCI failure counter if no new failures The current PCI error recovery system keeps track of the number of PCI card resets, and refuses to bring a card back up if this number is too large. The goal of doing this was to avoid an infinite loop of resets if a card is obviously dead. However, if the failures are rare, but the machine has a high uptime, this mechanism might still be triggered; this is too harsh. This patch will avoids this problem by decrementing the fail count after an hour. Thus, as long as a pci card BSOD's less than 6 times an hour, it will continue to be reset indefinitely. If it's failure rate is greater than that, it will be taken off-line permanently. This patch is larger than it might otherwise be because it changes indentation by removing a pointless while-loop. The while loop is not needed, as the handler is invoked once fo each event (by schedule_work()); the loop is leftover cruft from an earlier implementation. Signed-off-by: Linas Vepstas Signed-off-by: Andrew Morton Signed-off-by: Paul Mackerras commit 4bd174fe1cca738f53cf8bb9ac3cb327b1f516ed Author: Olof Johansson Date: Tue Apr 18 11:25:53 2006 -0500 [PATCH] powerpc: Remove stale iseries global Not even the iSeries maintainer seems to have access to this legendary piranha simulator. It adds a bit of ugliness in the common time init code, and if it's no longer used we might as well be done with it and remove the bloat. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras commit 5e1415c3f7d3ad133edb7ce9ca90641cf0f5fe79 Author: Olof Johansson Date: Wed Apr 12 15:29:00 2006 -0500 [PATCH] powerpc: Quiet oprofile output at boot No need to always print out which performance monitoring type is used on the console at every boot. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras commit 90ddfebec1b450258f85d42f043cfbae450fe47e Author: Olof Johansson Date: Wed Apr 12 15:28:13 2006 -0500 [PATCH] powerpc: Quiet rtasd output at boot Most users won't really know the difference between a started RTAS daemon and a missing event-scan. Move it to debug levels. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras commit e884e9c5f28c747ac2c3e1056e1fd655a79e950d Author: Olof Johansson Date: Wed Apr 12 15:26:59 2006 -0500 [PATCH] powerpc: Quiet PCI init printouts Quiet some of the more debug related output from the pci probe routines. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras commit cc98f70557bd08f2eea7b955dd918692a655d72e Author: Olof Johansson Date: Wed Apr 12 15:26:00 2006 -0500 [PATCH] powerpc: Lack of ISA interrupts on XICS isn't dangerous This isn't really a dangerous thing any more; most systems lack ISA interrupt controllers. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras commit e110b281dc93e3b4587a3d0440bb7ae38daddfde Author: Olof Johansson Date: Wed Apr 12 15:25:01 2006 -0500 [PATCH] powerpc: Less verbose mem configuration output Quieten some of the debug ram config output. we already print out available memory at KERN_INFO level. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras commit 4baaf0cfda7279e1adaedc203d7a09e8e44597ab Author: Olof Johansson Date: Wed Apr 12 15:23:22 2006 -0500 [PATCH] powerpc: Don't print chosen idle loop at every boot No need to write out what idle loop is used on every boot. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras commit f98baffb82710803005c19897f1a55af91da5685 Author: Olof Johansson Date: Wed Apr 12 15:22:29 2006 -0500 [PATCH] powerpc: Quiet VETH version printk ibmveth_printk() is only used to print the driver version when the module initializes, which means on all machines as long as it's compiled in. If it's really only needed for debugging, boot with loglevel=8, or get it from dmesg instead. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras commit f430c02b13f00146106fedcace810e61b4493d8c Author: Olof Johansson Date: Wed Apr 12 15:21:06 2006 -0500 [PATCH] powerpc: Quiet page order output No need to always print page orders. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras commit 224ad80ac0de102d7bede8d36afbd5ef0a64019f Author: Olof Johansson Date: Wed Apr 12 15:20:27 2006 -0500 [PATCH] powerpc: Quiet time init output Move time_init console output to KERN_DEBUG prink level. No need to print it at every boot. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras commit 8b6a7b2ea2ab18d46bc9e0e76b614d8c155291ad Author: Olof Johansson Date: Wed Apr 12 15:19:50 2006 -0500 [PATCH] powerpc: Quiet HVSI boot output There's no real need to print the number of found HVSI devices on the console at every boot. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras commit c256f4b9598c71afd8eb0b7d3d3790a38734cf43 Author: Anton Blanchard Date: Fri Apr 7 15:23:03 2006 +1000 [PATCH] powerpc: remove io_page_mask Cleanup patch which removes the io_page_mask. It fixes the reset on some e1000 devices which is needed for clean kexec reboots. The legacy devices which broke with this patch (parallel port and PC speaker) have now been fixed in Linus' tree. Signed-off-by: Anton Blanchard Acked-by: Michael Neuling Signed-off-by: Paul Mackerras commit 81bbbe92949b069c101e13d3acbd4bc7d088cb79 Author: Haren Myneni Date: Wed Apr 5 21:10:18 2006 -0600 [PATCH] powerpc: clear IPIs on kdump In some crash scenarios, the kexec CPU is not responding to an IPI sent by secondary CPU after init thread is forked, causing the system to drop into xmon during kdump boot. This problem can be reproduced each time when the debugger is enabled and soft-reset is used to invoke kdump boot. The first CPU sends an IPI - setting the IPI priority for all secondary cpus (xics_cause_ipi()). But some CPUs will enter into the xmon via soft-reset, i.e, not executing xics_ipi_action(). Hence, IPI is not cleared. When exited from the debugger, one of these CPUs could become the primary kexec CPU. Since the IPI is not cleared, causing this issue in kdump boot. This patch clears and EOI IPI for kexec CPU as well before the kdump boot started. Signed-off-by: Haren Myneni Signed-off-by: Paul Mackerras commit d6c1a9081080c6c4658acf2a06d851feb2855933 Author: Michael Ellerman Date: Tue Apr 4 13:43:01 2006 +0200 [PATCH] powerpc: Disable and EOI interrupts in machine_crash_shutdown() We've seen several bugs caused by interrupt weirdness in the kdump kernel. Panicking from an interrupt handler means we fail to EOI the interrupt, and so the second kernel never gets that interrupt ever again. We also see hangs on JS20 where we take interrupts in the second kernel early during boot. This patch fixes both those problems, and although it adds more code to the crash path I think it is the best solution. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras commit 591f0a4287d0de243493fd0c133c862e1d1f1c97 Author: Andy Fleming Date: Sun Apr 2 17:42:40 2006 -0500 Add 85xx CDS to arch/powerpc This patch adds support for 85xx CDS support to arch/powerpc Signed-off-by: Andy Fleming Signed-off-by: Kumar Gala --- diff --git a/arch/powerpc/configs/mpc85xx_cds_defconfig b/arch/powerpc/configs/mpc85xx_cds_defconfig new file mode 100644 index 0000000..9bb022a --- /dev/null +++ b/arch/powerpc/configs/mpc85xx_cds_defconfig @@ -0,0 +1,846 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.16 +# Sun Apr 2 11:23:42 2006 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +# CONFIG_DEFAULT_UIMAGE is not set + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_52xx is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +CONFIG_PPC_85xx=y +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_85xx=y +CONFIG_E500=y +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set +CONFIG_SPE=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_MPIC=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +# CONFIG_MPC8540_ADS is not set +CONFIG_MPC85xx_CDS=y +CONFIG_MPC8540=y +CONFIG_PPC_INDIRECT_PCI_BE=y + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=y +CONFIG_MATH_EMULATION=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set +# CONFIG_SECCOMP is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_PPC_I8259=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +# CONFIG_BLK_DEV_IDEDISK is not set +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +# CONFIG_IDEDMA_PCI_AUTO is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +CONFIG_BLK_DEV_VIA82CXXX=y +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +CONFIG_E1000_NAPI=y +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_UNWIND_INFO is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_DEBUGGER is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index 778f22f..dbcb859 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -174,6 +175,8 @@ static void crash_kexec_prepare_cpus(voi void default_machine_crash_shutdown(struct pt_regs *regs) { + unsigned int irq; + /* * This function is only called after the system * has paniced or is otherwise in a critical state. @@ -186,6 +189,16 @@ void default_machine_crash_shutdown(stru */ local_irq_disable(); + for_each_irq(irq) { + struct irq_desc *desc = irq_descp(irq); + + if (desc->status & IRQ_INPROGRESS) + desc->handler->end(irq); + + if (!(desc->status & IRQ_DISABLED)) + desc->handler->disable(irq); + } + if (ppc_md.kexec_cpu_down) ppc_md.kexec_cpu_down(1, 0); diff --git a/arch/powerpc/kernel/iomap.c b/arch/powerpc/kernel/iomap.c index fd8214c..a13a93d 100644 --- a/arch/powerpc/kernel/iomap.c +++ b/arch/powerpc/kernel/iomap.c @@ -106,8 +106,6 @@ EXPORT_SYMBOL(iowrite32_rep); void __iomem *ioport_map(unsigned long port, unsigned int len) { - if (!_IO_IS_VALID(port)) - return NULL; return (void __iomem *) (port+pci_io_base); } diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 4c4449b..e1b3b3e 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -42,14 +42,6 @@ unsigned long pci_probe_only = 1; int pci_assign_all_buses = 0; -/* - * legal IO pages under MAX_ISA_PORT. This is to ensure we don't touch - * devices we don't have access to. - */ -unsigned long io_page_mask; - -EXPORT_SYMBOL(io_page_mask); - #ifdef CONFIG_PPC_MULTIPLATFORM static void fixup_resource(struct resource *res, struct pci_dev *dev); static void do_bus_setup(struct pci_bus *bus); @@ -605,7 +597,7 @@ static int __init pcibios_init(void) iSeries_pcibios_init(); #endif - printk("PCI: Probing PCI hardware\n"); + printk(KERN_DEBUG "PCI: Probing PCI hardware\n"); /* Scan all of the recorded PCI controllers. */ list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { @@ -630,14 +622,14 @@ static int __init pcibios_init(void) /* Cache the location of the ISA bridge (if we have one) */ ppc64_isabridge_dev = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL); if (ppc64_isabridge_dev != NULL) - printk("ISA bridge at %s\n", pci_name(ppc64_isabridge_dev)); + printk(KERN_DEBUG "ISA bridge at %s\n", pci_name(ppc64_isabridge_dev)); #ifdef CONFIG_PPC_MULTIPLATFORM /* map in PCI I/O space */ phbs_remap_io(); #endif - printk("PCI: Probing PCI hardware done\n"); + printk(KERN_DEBUG "PCI: Probing PCI hardware done\n"); return 0; } @@ -804,7 +796,7 @@ static pgprot_t __pci_mmap_set_pgprot(st else prot |= _PAGE_GUARDED; - printk("PCI map for %s:%lx, prot: %lx\n", pci_name(dev), rp->start, + printk(KERN_DEBUG "PCI map for %s:%lx, prot: %lx\n", pci_name(dev), rp->start, prot); return __pgprot(prot); @@ -1104,8 +1096,6 @@ void __init pci_setup_phb_io(struct pci_ pci_process_ISA_OF_ranges(isa_dn, hose->io_base_phys, hose->io_base_virt); of_node_put(isa_dn); - /* Allow all IO */ - io_page_mask = -1; } } @@ -1212,7 +1202,7 @@ int remap_bus_range(struct pci_bus *bus) return 1; if (start_phys == 0) return 1; - printk("mapping IO %lx -> %lx, size: %lx\n", start_phys, start_virt, size); + printk(KERN_DEBUG "mapping IO %lx -> %lx, size: %lx\n", start_phys, start_virt, size); if (__ioremap_explicit(start_phys, start_virt, size, _PAGE_NO_CACHE | _PAGE_GUARDED)) return 1; @@ -1232,27 +1222,13 @@ static void phbs_remap_io(void) static void __devinit fixup_resource(struct resource *res, struct pci_dev *dev) { struct pci_controller *hose = pci_bus_to_host(dev->bus); - unsigned long start, end, mask, offset; + unsigned long offset; if (res->flags & IORESOURCE_IO) { offset = (unsigned long)hose->io_base_virt - pci_io_base; - start = res->start += offset; - end = res->end += offset; - - /* Need to allow IO access to pages that are in the - ISA range */ - if (start < MAX_ISA_PORT) { - if (end > MAX_ISA_PORT) - end = MAX_ISA_PORT; - - start >>= PAGE_SHIFT; - end >>= PAGE_SHIFT; - - /* get the range of pages for the map */ - mask = ((1 << (end+1)) - 1) ^ ((1 << start) - 1); - io_page_mask |= mask; - } + res->start += offset; + res->end += offset; } else if (res->flags & IORESOURCE_MEM) { res->start += hose->pci_mem_offset; res->end += hose->pci_mem_offset; diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 24e3ad7..528e7f8 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -76,7 +76,6 @@ /* keep track of when we need to update the rtc */ time_t last_rtc_update; -extern int piranha_simulator; #ifdef CONFIG_PPC_ISERIES unsigned long iSeries_recal_titan = 0; unsigned long iSeries_recal_tb = 0; @@ -945,9 +944,9 @@ void __init time_init(void) } else { /* Normal PowerPC with timebase register */ ppc_md.calibrate_decr(); - printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n", + printk(KERN_DEBUG "time_init: decrementer frequency = %lu.%.6lu MHz\n", ppc_tb_freq / 1000000, ppc_tb_freq % 1000000); - printk(KERN_INFO "time_init: processor frequency = %lu.%.6lu MHz\n", + printk(KERN_DEBUG "time_init: processor frequency = %lu.%.6lu MHz\n", ppc_proc_freq / 1000000, ppc_proc_freq % 1000000); tb_last_stamp = tb_last_jiffy = get_tb(); } @@ -1010,10 +1009,7 @@ void __init time_init(void) tb_to_ns_scale = scale; tb_to_ns_shift = shift; -#ifdef CONFIG_PPC_ISERIES - if (!piranha_simulator) -#endif - tm = get_boot_time(); + tm = get_boot_time(); write_seqlock_irqsave(&xtime_lock, flags); diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index c006d90..b43ed92 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -319,7 +319,7 @@ static void __init htab_init_page_sizes( mmu_virtual_psize = MMU_PAGE_64K; #endif - printk(KERN_INFO "Page orders: linear mapping = %d, others = %d\n", + printk(KERN_DEBUG "Page orders: linear mapping = %d, others = %d\n", mmu_psize_defs[mmu_linear_psize].shift, mmu_psize_defs[mmu_virtual_psize].shift); diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 741dd88..69f3b9a 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -299,9 +299,9 @@ void __init paging_init(void) kmap_prot = PAGE_KERNEL; #endif /* CONFIG_HIGHMEM */ - printk(KERN_INFO "Top of RAM: 0x%lx, Total RAM: 0x%lx\n", + printk(KERN_DEBUG "Top of RAM: 0x%lx, Total RAM: 0x%lx\n", top_of_ram, total_ram); - printk(KERN_INFO "Memory hole size: %ldMB\n", + printk(KERN_DEBUG "Memory hole size: %ldMB\n", (top_of_ram - total_ram) >> 20); /* * All pages are DMA-able so we put them all in the DMA zone. @@ -380,7 +380,7 @@ void __init mem_init(void) totalhigh_pages++; } totalram_pages += totalhigh_pages; - printk(KERN_INFO "High memory: %luk\n", + printk(KERN_DEBUG "High memory: %luk\n", totalhigh_pages << (PAGE_SHIFT-10)); } #endif /* CONFIG_HIGHMEM */ diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 0a335f3..ea816c6 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -465,9 +465,9 @@ static void __init setup_nonnuma(void) unsigned long total_ram = lmb_phys_mem_size(); unsigned int i; - printk(KERN_INFO "Top of RAM: 0x%lx, Total RAM: 0x%lx\n", + printk(KERN_DEBUG "Top of RAM: 0x%lx, Total RAM: 0x%lx\n", top_of_ram, total_ram); - printk(KERN_INFO "Memory hole size: %ldMB\n", + printk(KERN_DEBUG "Memory hole size: %ldMB\n", (top_of_ram - total_ram) >> 20); for (i = 0; i < lmb.memory.cnt; ++i) @@ -485,7 +485,7 @@ void __init dump_numa_cpu_topology(void) return; for_each_online_node(node) { - printk(KERN_INFO "Node %d CPUs:", node); + printk(KERN_DEBUG "Node %d CPUs:", node); count = 0; /* @@ -521,7 +521,7 @@ static void __init dump_numa_memory_topo for_each_online_node(node) { unsigned long i; - printk(KERN_INFO "Node %d Memory:", node); + printk(KERN_DEBUG "Node %d Memory:", node); count = 0; diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c index 5b1de7e..38a2f9c 100644 --- a/arch/powerpc/oprofile/common.c +++ b/arch/powerpc/oprofile/common.c @@ -162,7 +162,7 @@ int __init oprofile_arch_init(struct opr ops->stop = op_powerpc_stop; ops->backtrace = op_powerpc_backtrace; - printk(KERN_INFO "oprofile: using %s performance monitoring.\n", + printk(KERN_DEBUG "oprofile: using %s performance monitoring.\n", ops->cpu_type); return 0; diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 06e3712..454fc53 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -11,13 +11,20 @@ config MPC8540_ADS help This option enables support for the MPC 8540 ADS board +config MPC85xx_CDS + bool "Freescale MPC85xx CDS" + select DEFAULT_UIMAGE + select PPC_I8259 if PCI + help + This option enables support for the MPC85xx CDS board + endchoice config MPC8540 bool select PPC_UDBG_16550 select PPC_INDIRECT_PCI - default y if MPC8540_ADS + default y if MPC8540_ADS || MPC85xx_CDS config PPC_INDIRECT_PCI_BE bool diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index ffc4139..7615aa5 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_PPC_85xx) += misc.o pci.o obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o +obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c new file mode 100644 index 0000000..18e6e11 --- /dev/null +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -0,0 +1,359 @@ +/* + * MPC85xx setup and early boot code plus other random bits. + * + * Maintained by Kumar Gala (see MAINTAINERS for contact information) + * + * Copyright 2005 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include "mpc85xx.h" + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + +static int cds_pci_slot = 2; +static volatile u8 *cadmus; + +/* + * Internal interrupts are all Level Sensitive, and Positive Polarity + * + * Note: Likely, this table and the following function should be + * obtained and derived from the OF Device Tree. + */ +static u_char mpc85xx_cds_openpic_initsenses[] __initdata = { + MPC85XX_INTERNAL_IRQ_SENSES, +#if defined(CONFIG_PCI) + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Ext 0: PCI slot 0 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 1 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 2 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 3 */ +#else + 0x0, /* External 0: */ + 0x0, /* External 1: */ + 0x0, /* External 2: */ + 0x0, /* External 3: */ +#endif + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */ + 0x0, /* External 6: */ + 0x0, /* External 7: */ + 0x0, /* External 8: */ + 0x0, /* External 9: */ + 0x0, /* External 10: */ +#ifdef CONFIG_PCI + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 11: PCI2 slot 0 */ +#else + 0x0, /* External 11: */ +#endif +}; + + +#ifdef CONFIG_PCI +/* + * interrupt routing + */ +int +mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); + + if (!hose->index) + { + /* Handle PCI1 interrupts */ + char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + + /* Note IRQ assignment for slots is based on which slot the elysium is + * in -- in this setup elysium is in slot #2 (this PIRQA as first + * interrupt on slot */ + { + { 0, 1, 2, 3 }, /* 16 - PMC */ + { 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */ + { 0, 1, 2, 3 }, /* 18 - Slot 1 */ + { 1, 2, 3, 0 }, /* 19 - Slot 2 */ + { 2, 3, 0, 1 }, /* 20 - Slot 3 */ + { 3, 0, 1, 2 }, /* 21 - Slot 4 */ + }; + + const long min_idsel = 16, max_idsel = 21, irqs_per_slot = 4; + int i, j; + + for (i = 0; i < 6; i++) + for (j = 0; j < 4; j++) + pci_irq_table[i][j] = + ((pci_irq_table[i][j] + 5 - + cds_pci_slot) & 0x3) + PIRQ0A; + + return PCI_IRQ_TABLE_LOOKUP; + } else { + /* Handle PCI2 interrupts (if we have one) */ + char pci_irq_table[][4] = + { + /* + * We only have one slot and one interrupt + * going to PIRQA - PIRQD */ + { PIRQ1A, PIRQ1A, PIRQ1A, PIRQ1A }, /* 21 - slot 0 */ + }; + + const long min_idsel = 21, max_idsel = 21, irqs_per_slot = 4; + + return PCI_IRQ_TABLE_LOOKUP; + } +} + +#define ARCADIA_HOST_BRIDGE_IDSEL 17 +#define ARCADIA_2ND_BRIDGE_IDSEL 3 + +extern int mpc85xx_pci2_busno; + +int +mpc85xx_exclude_device(u_char bus, u_char devfn) +{ + if (bus == 0 && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + if (mpc85xx_pci2_busno) + if (bus == (mpc85xx_pci2_busno) && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + /* We explicitly do not go past the Tundra 320 Bridge */ + if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL)) + return PCIBIOS_DEVICE_NOT_FOUND; + if ((bus == 0) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL)) + return PCIBIOS_DEVICE_NOT_FOUND; + else + return PCIBIOS_SUCCESSFUL; +} + +void __init +mpc85xx_cds_pcibios_fixup(void) +{ + struct pci_dev *dev; + u_char c; + + if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_82C586_1, NULL))) { + /* + * U-Boot does not set the enable bits + * for the IDE device. Force them on here. + */ + pci_read_config_byte(dev, 0x40, &c); + c |= 0x03; /* IDE: Chip Enable Bits */ + pci_write_config_byte(dev, 0x40, c); + + /* + * Since only primary interface works, force the + * IDE function to standard primary IDE interrupt + * w/ 8259 offset + */ + dev->irq = 14; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + pci_dev_put(dev); + } + + /* + * Force legacy USB interrupt routing + */ + if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_82C586_2, NULL))) { + dev->irq = 10; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 10); + pci_dev_put(dev); + } + + if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_82C586_2, dev))) { + dev->irq = 11; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11); + pci_dev_put(dev); + } +} +#endif /* CONFIG_PCI */ + +void __init mpc85xx_cds_pic_init(void) +{ + struct mpic *mpic1; + phys_addr_t OpenPIC_PAddr; + + /* Determine the Physical Address of the OpenPIC regs */ + OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET; + + mpic1 = mpic_alloc(OpenPIC_PAddr, + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250, + mpc85xx_cds_openpic_initsenses, + sizeof(mpc85xx_cds_openpic_initsenses), " OpenPIC "); + BUG_ON(mpic1 == NULL); + mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200); + mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280); + mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300); + mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380); + mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400); + mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480); + mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500); + mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580); + + /* dummy mappings to get to 48 */ + mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600); + mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680); + mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700); + mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780); + + /* External ints */ + mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000); + mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080); + mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100); + + mpic_init(mpic1); + +#ifdef CONFIG_PCI + mpic_setup_cascade(PIRQ0A, i8259_irq_cascade, NULL); + + i8259_init(0,0); +#endif +} + + +/* + * Setup the architecture + */ +static void __init +mpc85xx_cds_setup_arch(void) +{ + struct device_node *cpu; +#ifdef CONFIG_PCI + struct device_node *np; +#endif + + if (ppc_md.progress) + ppc_md.progress("mpc85xx_cds_setup_arch()", 0); + + cpu = of_find_node_by_type(NULL, "cpu"); + if (cpu != 0) { + unsigned int *fp; + + fp = (int *)get_property(cpu, "clock-frequency", NULL); + if (fp != 0) + loops_per_jiffy = *fp / HZ; + else + loops_per_jiffy = 500000000 / HZ; + of_node_put(cpu); + } + + cadmus = ioremap(CADMUS_BASE, CADMUS_SIZE); + cds_pci_slot = ((cadmus[CM_CSR] >> 6) & 0x3) + 1; + + if (ppc_md.progress) { + char buf[40]; + snprintf(buf, 40, "CDS Version = 0x%x in slot %d\n", + cadmus[CM_VER], cds_pci_slot); + ppc_md.progress(buf, 0); + } + +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + + ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup; + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_map_irq = mpc85xx_map_irq; + ppc_md.pci_exclude_device = mpc85xx_exclude_device; +#endif + +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif +} + + +void +mpc85xx_cds_show_cpuinfo(struct seq_file *m) +{ + uint pvid, svid, phid1; + uint memsize = total_memory; + + pvid = mfspr(SPRN_PVR); + svid = mfspr(SPRN_SVR); + + seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n"); + seq_printf(m, "Machine\t\t: MPC85xx CDS (0x%x)\n", cadmus[CM_VER]); + seq_printf(m, "PVR\t\t: 0x%x\n", pvid); + seq_printf(m, "SVR\t\t: 0x%x\n", svid); + + /* Display cpu Pll setting */ + phid1 = mfspr(SPRN_HID1); + seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); + + /* Display the amount of memory */ + seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); +} + + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init mpc85xx_cds_probe(void) +{ + /* We always match for now, eventually we should look at + * the flat dev tree to ensure this is the board we are + * supposed to run on + */ + return 1; +} + +define_machine(mpc85xx_cds) { + .name = "MPC85xx CDS", + .probe = mpc85xx_cds_probe, + .setup_arch = mpc85xx_cds_setup_arch, + .init_IRQ = mpc85xx_cds_pic_init, + .show_cpuinfo = mpc85xx_cds_show_cpuinfo, + .get_irq = mpic_get_irq, + .restart = mpc85xx_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.h b/arch/powerpc/platforms/85xx/mpc85xx_cds.h new file mode 100644 index 0000000..671f54f --- /dev/null +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.h @@ -0,0 +1,43 @@ +/* + * arch/ppc/platforms/85xx/mpc85xx_cds_common.h + * + * MPC85xx CDS board definitions + * + * Maintainer: Kumar Gala + * + * Copyright 2004 Freescale Semiconductor, Inc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MACH_MPC85XX_CDS_H__ +#define __MACH_MPC85XX_CDS_H__ + +/* CADMUS info */ +#define CADMUS_BASE (0xf8004000) +#define CADMUS_SIZE (256) +#define CM_VER (0) +#define CM_CSR (1) +#define CM_RST (2) + +/* CDS NVRAM/RTC */ +#define CDS_RTC_ADDR (0xf8000000) +#define CDS_RTC_SIZE (8 * 1024) + +/* PCI interrupt controller */ +#define PIRQ0A MPC85xx_IRQ_EXT0 +#define PIRQ0B MPC85xx_IRQ_EXT1 +#define PIRQ0C MPC85xx_IRQ_EXT2 +#define PIRQ0D MPC85xx_IRQ_EXT3 +#define PIRQ1A MPC85xx_IRQ_EXT11 + +#define NR_8259_INTS 16 +#define CPM_IRQ_OFFSET NR_8259_INTS + +#define MPC85xx_OPENPIC_IRQ_OFFSET 80 + +#endif /* __MACH_MPC85XX_CDS_H__ */ diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c index d771b8e..1a2c2a5 100644 --- a/arch/powerpc/platforms/iseries/mf.c +++ b/arch/powerpc/platforms/iseries/mf.c @@ -45,7 +45,6 @@ #include "setup.h" -extern int piranha_simulator; static int mf_initialized; /* @@ -658,7 +657,7 @@ static void mf_clear_src(void) void __init mf_display_progress(u16 value) { - if (piranha_simulator || !mf_initialized) + if (!mf_initialized) return; if (0xFFFF == value) @@ -1295,9 +1294,6 @@ __initcall(mf_proc_init); */ void iSeries_get_rtc_time(struct rtc_time *rtc_tm) { - if (piranha_simulator) - return; - mf_get_rtc(rtc_tm); rtc_tm->tm_mon--; } @@ -1316,9 +1312,6 @@ unsigned long iSeries_get_boot_time(void { struct rtc_time tm; - if (piranha_simulator) - return 0; - mf_get_boot_rtc(&tm); return mktime(tm.tm_year + 1900, tm.tm_mon, tm.tm_mday, tm.tm_hour, tm.tm_min, tm.tm_sec); diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c index a19833b..5a61c6f 100644 --- a/arch/powerpc/platforms/iseries/pci.c +++ b/arch/powerpc/platforms/iseries/pci.c @@ -45,8 +45,6 @@ #include "call_pci.h" #include "iommu.h" -extern unsigned long io_page_mask; - /* * Forward declares of prototypes. */ @@ -277,7 +275,6 @@ void iSeries_pcibios_init(void) { iomm_table_initialize(); find_and_init_phbs(); - io_page_mask = -1; } /* diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index a6fd9be..3c51448 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -81,9 +81,6 @@ extern void iSeries_pci_final_fixup(void static void iSeries_pci_final_fixup(void) { } #endif -/* Global Variables */ -int piranha_simulator; - extern int rd_size; /* Defined in drivers/block/rd.c */ extern unsigned long embedded_sysmap_start; extern unsigned long embedded_sysmap_end; @@ -340,8 +337,6 @@ static void __init iSeries_init_early(vo #ifdef CONFIG_SMP smp_init_iSeries(); #endif - if (itLpNaca.xPirEnvironMode == 0) - piranha_simulator = 1; /* Associate Lp Event Queue 0 with processor 0 */ HvCallEvent_setLpEventQueueInterruptProc(0, 0); @@ -536,10 +531,10 @@ static void __init iSeries_setup_arch(vo { if (get_lppaca()->shared_proc) { ppc_md.idle_loop = iseries_shared_idle; - printk(KERN_INFO "Using shared processor idle loop\n"); + printk(KERN_DEBUG "Using shared processor idle loop\n"); } else { ppc_md.idle_loop = iseries_dedicated_idle; - printk(KERN_INFO "Using dedicated idle loop\n"); + printk(KERN_DEBUG "Using dedicated idle loop\n"); } /* Setup the Lp Event Queue */ diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index 85d6c93..9a4efc0 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -437,9 +437,6 @@ void __init maple_pci_init(void) /* Tell pci.c to not change any resource allocations. */ pci_probe_only = 1; - - /* Allow all IO */ - io_page_mask = -1; } int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel) diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c index 24c0aef..a0505ea 100644 --- a/arch/powerpc/platforms/maple/setup.c +++ b/arch/powerpc/platforms/maple/setup.c @@ -189,7 +189,7 @@ void __init maple_setup_arch(void) conswitchp = &dummy_con; #endif - printk(KERN_INFO "Using native/NAP idle loop\n"); + printk(KERN_DEBUG "Using native/NAP idle loop\n"); } /* diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index a5063cd..85e00cb 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -2510,7 +2510,7 @@ found: if (get_property(np, "flush-on-lock", NULL)) break; powersave_nap = 1; - printk(KERN_INFO "Processor NAP mode on idle enabled.\n"); + printk(KERN_DEBUG "Processor NAP mode on idle enabled.\n"); break; } diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index f5d8d15..3212618 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -1068,9 +1068,6 @@ void __init pmac_pci_init(void) /* Tell pci.c to not use the common resource allocation mechanism */ pci_probe_only = 1; - /* Allow all IO */ - io_page_mask = -1; - #else /* CONFIG_PPC64 */ init_p2pbridge(); fixup_nec_usb2(); diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c index 1fba695..2a9eb26 100644 --- a/arch/powerpc/platforms/pseries/eeh_driver.c +++ b/arch/powerpc/platforms/pseries/eeh_driver.c @@ -23,9 +23,8 @@ * */ #include -#include #include -#include +#include #include #include #include @@ -250,7 +249,7 @@ static int eeh_reset_device (struct pci_ */ #define MAX_WAIT_FOR_RECOVERY 15 -void handle_eeh_events (struct eeh_event *event) +struct pci_dn * handle_eeh_events (struct eeh_event *event) { struct device_node *frozen_dn; struct pci_dn *frozen_pdn; @@ -265,7 +264,7 @@ void handle_eeh_events (struct eeh_event if (!frozen_dn) { printk(KERN_ERR "EEH: Error: Cannot find partition endpoint for %s\n", pci_name(event->dev)); - return; + return NULL; } /* There are two different styles for coming up with the PE. @@ -280,7 +279,7 @@ void handle_eeh_events (struct eeh_event if (!frozen_bus) { printk(KERN_ERR "EEH: Cannot find PCI bus for %s\n", frozen_dn->full_name); - return; + return NULL; } #if 0 @@ -355,7 +354,7 @@ void handle_eeh_events (struct eeh_event /* Tell all device drivers that they can resume operations */ pci_walk_bus(frozen_bus, eeh_report_resume, NULL); - return; + return frozen_pdn; excess_failures: /* @@ -384,6 +383,8 @@ perm_error: /* Shut down the device drivers for good. */ pcibios_remove_pci_devices(frozen_bus); + + return NULL; } /* ---------- end of file ---------- */ diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c index a1bda6f..a0b3964 100644 --- a/arch/powerpc/platforms/pseries/eeh_event.c +++ b/arch/powerpc/platforms/pseries/eeh_event.c @@ -18,6 +18,7 @@ * Copyright (c) 2005 Linas Vepstas */ +#include #include #include #include @@ -56,38 +57,43 @@ static int eeh_event_handler(void * dumm { unsigned long flags; struct eeh_event *event; + struct pci_dn *pdn; daemonize ("eehd"); + set_current_state(TASK_INTERRUPTIBLE); - while (1) { - set_current_state(TASK_INTERRUPTIBLE); + spin_lock_irqsave(&eeh_eventlist_lock, flags); + event = NULL; + + /* Unqueue the event, get ready to process. */ + if (!list_empty(&eeh_eventlist)) { + event = list_entry(eeh_eventlist.next, struct eeh_event, list); + list_del(&event->list); + } + spin_unlock_irqrestore(&eeh_eventlist_lock, flags); - spin_lock_irqsave(&eeh_eventlist_lock, flags); - event = NULL; + if (event == NULL) + return 0; - /* Unqueue the event, get ready to process. */ - if (!list_empty(&eeh_eventlist)) { - event = list_entry(eeh_eventlist.next, struct eeh_event, list); - list_del(&event->list); - } - spin_unlock_irqrestore(&eeh_eventlist_lock, flags); - - if (event == NULL) - break; - - /* Serialize processing of EEH events */ - mutex_lock(&eeh_event_mutex); - eeh_mark_slot(event->dn, EEH_MODE_RECOVERING); - - printk(KERN_INFO "EEH: Detected PCI bus error on device %s\n", - pci_name(event->dev)); - - handle_eeh_events(event); - - eeh_clear_slot(event->dn, EEH_MODE_RECOVERING); - pci_dev_put(event->dev); - kfree(event); - mutex_unlock(&eeh_event_mutex); + /* Serialize processing of EEH events */ + mutex_lock(&eeh_event_mutex); + eeh_mark_slot(event->dn, EEH_MODE_RECOVERING); + + printk(KERN_INFO "EEH: Detected PCI bus error on device %s\n", + pci_name(event->dev)); + + pdn = handle_eeh_events(event); + + eeh_clear_slot(event->dn, EEH_MODE_RECOVERING); + pci_dev_put(event->dev); + kfree(event); + mutex_unlock(&eeh_event_mutex); + + /* If there are no new errors after an hour, clear the counter. */ + if (pdn && pdn->eeh_freeze_count>0) { + msleep_interruptible (3600*1000); + if (pdn->eeh_freeze_count>0) + pdn->eeh_freeze_count--; } return 0; diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c index e0000ce..2e4e040 100644 --- a/arch/powerpc/platforms/pseries/rtasd.c +++ b/arch/powerpc/platforms/pseries/rtasd.c @@ -348,7 +348,7 @@ static int enable_surveillance(int timeo return 0; if (error == -EINVAL) { - printk(KERN_INFO "rtasd: surveillance not supported\n"); + printk(KERN_DEBUG "rtasd: surveillance not supported\n"); return 0; } @@ -440,7 +440,7 @@ static int rtasd(void *unused) goto error; } - printk(KERN_INFO "RTAS daemon started\n"); + printk(KERN_DEBUG "RTAS daemon started\n"); DEBUG("will sleep for %d milliseconds\n", (30000/rtas_event_scan_rate)); @@ -487,7 +487,7 @@ static int __init rtas_init(void) /* No RTAS */ if (rtas_token("event-scan") == RTAS_UNKNOWN_SERVICE) { - printk(KERN_INFO "rtasd: no event-scan on system\n"); + printk(KERN_DEBUG "rtasd: no event-scan on system\n"); return -ENODEV; } diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 5eb55ef..9118d79 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -235,14 +235,14 @@ static void __init pSeries_setup_arch(vo if (firmware_has_feature(FW_FEATURE_SPLPAR)) { vpa_init(boot_cpuid); if (get_lppaca()->shared_proc) { - printk(KERN_INFO "Using shared processor idle loop\n"); + printk(KERN_DEBUG "Using shared processor idle loop\n"); ppc_md.power_save = pseries_shared_idle_sleep; } else { - printk(KERN_INFO "Using dedicated idle loop\n"); + printk(KERN_DEBUG "Using dedicated idle loop\n"); ppc_md.power_save = pseries_dedicated_idle_sleep; } } else { - printk(KERN_INFO "Using default idle loop\n"); + printk(KERN_DEBUG "Using default idle loop\n"); } if (firmware_has_feature(FW_FEATURE_LPAR)) diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index 2d60ea3..b14f9b5 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -522,7 +522,7 @@ nextnode: np = of_find_node_by_type(NULL, "interrupt-controller"); if (!np) { - printk(KERN_WARNING "xics: no ISA interrupt controller\n"); + printk(KERN_DEBUG "xics: no ISA interrupt controller\n"); xics_irq_8259_cascade_real = -1; xics_irq_8259_cascade = -1; } else { @@ -641,23 +641,26 @@ void xics_teardown_cpu(int secondary) ops->cppr_info(cpu, 0x00); iosync(); + /* Clear IPI */ + ops->qirr_info(cpu, 0xff); + + /* + * we need to EOI the IPI if we got here from kexec down IPI + * + * probably need to check all the other interrupts too + * should we be flagging idle loop instead? + * or creating some task to be scheduled? + */ + ops->xirr_info_set(cpu, XICS_IPI); + /* * Some machines need to have at least one cpu in the GIQ, * so leave the master cpu in the group. */ - if (secondary) { - /* - * we need to EOI the IPI if we got here from kexec down IPI - * - * probably need to check all the other interrupts too - * should we be flagging idle loop instead? - * or creating some task to be scheduled? - */ - ops->xirr_info_set(cpu, XICS_IPI); + if (secondary) rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE, (1UL << interrupt_server_size) - 1 - default_distrib_server, 0); - } } #ifdef CONFIG_HOTPLUG_CPU diff --git a/drivers/char/hvsi.c b/drivers/char/hvsi.c index a952218..a0370ed 100644 --- a/drivers/char/hvsi.c +++ b/drivers/char/hvsi.c @@ -1179,7 +1179,7 @@ static int __init hvsi_init(void) if (tty_register_driver(hvsi_driver)) panic("Couldn't register hvsi console driver\n"); - printk(KERN_INFO "HVSI: registered %i devices\n", hvsi_count); + printk(KERN_DEBUG "HVSI: registered %i devices\n", hvsi_count); return 0; } diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c index 52d0102..37965dc 100644 --- a/drivers/net/ibmveth.c +++ b/drivers/net/ibmveth.c @@ -61,7 +61,7 @@ #undef DEBUG #define ibmveth_printk(fmt, args...) \ - printk(KERN_INFO "%s: " fmt, __FILE__, ## args) + printk(KERN_DEBUG "%s: " fmt, __FILE__, ## args) #define ibmveth_error_printk(fmt, args...) \ printk(KERN_ERR "(%s:%3.3d ua:%x) ERROR: " fmt, __FILE__, __LINE__ , adapter->vdev->unit_address, ## args) diff --git a/include/asm-powerpc/eeh.h b/include/asm-powerpc/eeh.h index 868c713..2c3dc4a 100644 --- a/include/asm-powerpc/eeh.h +++ b/include/asm-powerpc/eeh.h @@ -293,8 +293,6 @@ static inline void eeh_memcpy_toio(volat static inline u8 eeh_inb(unsigned long port) { u8 val; - if (!_IO_IS_VALID(port)) - return ~0; val = in_8((u8 __iomem *)(port+pci_io_base)); if (EEH_POSSIBLE_ERROR(val, u8)) return eeh_check_failure((void __iomem *)(port), val); @@ -303,15 +301,12 @@ static inline u8 eeh_inb(unsigned long p static inline void eeh_outb(u8 val, unsigned long port) { - if (_IO_IS_VALID(port)) - out_8((u8 __iomem *)(port+pci_io_base), val); + out_8((u8 __iomem *)(port+pci_io_base), val); } static inline u16 eeh_inw(unsigned long port) { u16 val; - if (!_IO_IS_VALID(port)) - return ~0; val = in_le16((u16 __iomem *)(port+pci_io_base)); if (EEH_POSSIBLE_ERROR(val, u16)) return eeh_check_failure((void __iomem *)(port), val); @@ -320,15 +315,12 @@ static inline u16 eeh_inw(unsigned long static inline void eeh_outw(u16 val, unsigned long port) { - if (_IO_IS_VALID(port)) - out_le16((u16 __iomem *)(port+pci_io_base), val); + out_le16((u16 __iomem *)(port+pci_io_base), val); } static inline u32 eeh_inl(unsigned long port) { u32 val; - if (!_IO_IS_VALID(port)) - return ~0; val = in_le32((u32 __iomem *)(port+pci_io_base)); if (EEH_POSSIBLE_ERROR(val, u32)) return eeh_check_failure((void __iomem *)(port), val); @@ -337,8 +329,7 @@ static inline u32 eeh_inl(unsigned long static inline void eeh_outl(u32 val, unsigned long port) { - if (_IO_IS_VALID(port)) - out_le32((u32 __iomem *)(port+pci_io_base), val); + out_le32((u32 __iomem *)(port+pci_io_base), val); } /* in-string eeh macros */ diff --git a/include/asm-powerpc/eeh_event.h b/include/asm-powerpc/eeh_event.h index 93d55a2..dc6bf0f 100644 --- a/include/asm-powerpc/eeh_event.h +++ b/include/asm-powerpc/eeh_event.h @@ -18,8 +18,8 @@ * Copyright (c) 2005 Linas Vepstas */ -#ifndef ASM_PPC64_EEH_EVENT_H -#define ASM_PPC64_EEH_EVENT_H +#ifndef ASM_POWERPC_EEH_EVENT_H +#define ASM_POWERPC_EEH_EVENT_H #ifdef __KERNEL__ /** EEH event -- structure holding pci controller data that describes @@ -39,7 +39,7 @@ struct eeh_event { * @dev pci device * * This routine builds a PCI error event which will be delivered - * to all listeners on the peh_notifier_chain. + * to all listeners on the eeh_notifier_chain. * * This routine can be called within an interrupt context; * the actual event will be delivered in a normal context @@ -51,7 +51,7 @@ int eeh_send_failure_event (struct devic int time_unavail); /* Main recovery function */ -void handle_eeh_events (struct eeh_event *); +struct pci_dn * handle_eeh_events (struct eeh_event *); #endif /* __KERNEL__ */ -#endif /* ASM_PPC64_EEH_EVENT_H */ +#endif /* ASM_POWERPC_EEH_EVENT_H */ diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h index 68efbea..4840fbf 100644 --- a/include/asm-powerpc/io.h +++ b/include/asm-powerpc/io.h @@ -37,12 +37,6 @@ extern unsigned long isa_io_base; extern unsigned long pci_io_base; -extern unsigned long io_page_mask; - -#define MAX_ISA_PORT 0x10000 - -#define _IO_IS_VALID(port) ((port) >= MAX_ISA_PORT || (1 << (port>>PAGE_SHIFT)) \ - & io_page_mask) #ifdef CONFIG_PPC_ISERIES /* __raw_* accessors aren't supported on iSeries */ diff --git a/include/asm-ppc/mpc85xx.h b/include/asm-ppc/mpc85xx.h index f47002a..4f844eb 100644 --- a/include/asm-ppc/mpc85xx.h +++ b/include/asm-ppc/mpc85xx.h @@ -28,6 +28,9 @@ #if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS) #include #endif +#ifdef CONFIG_MPC85xx_CDS +#include +#endif #ifdef CONFIG_MPC8560_ADS #include #endif