GIT b29527edccbbc53a908bc34a910df3601061c950 git+ssh://master.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog-mm.git commit b29527edccbbc53a908bc34a910df3601061c950 Author: Wim Van Sebroeck Date: Sun May 21 14:37:44 2006 +0200 [WATCHDOG] iTCO_wdt (Intel TCO Timer) driver Hardware driver for the intel TCO timer based watchdog devices. These drivers are included in the Intel 82801 I/O Controller Hub family 'from ICH0 up to ICH7) and in the Intel 6300ESB controller hub. This driver will replace the i8xx_tco.c driver. Signed-off-by: Wim Van Sebroeck commit 312dea56bd4320e35b1adc0b48418b84e76b2885 Author: Wim Van Sebroeck Date: Sun May 21 12:48:44 2006 +0200 [WATCHDOG] add WDIOC_GETTIMELEFT ioctl Some watchdog drivers have the ability to report the remaining time before the system will reboot. With the WDIOC_GETTIMELEFT ioctl you can now read the time left before the watchdog would reboot your system. The following drivers support this new IOCTL: i8xx_tco.c, pcwd_pci.c and pcwd_usb.c . Signed-off-by: Wim Van Sebroeck commit c06f96636a7c2b77468b63ff5273c75d5e78fe7c Author: Corey Minyard Date: Wed Apr 19 22:40:53 2006 +0200 [WATCHDOG] Pre-Timeout flags Some watchdog timers support the concept of a "pretimeout" which occurs some time before the real timeout. The pretimeout can be delivered via an interrupt or NMI and can be used to panic the system when it occurs (so you get useful information instead of a blind reboot). Signed-off-by: Corey Minyard Signed-off-by: Wim Van Sebroeck --- diff --git a/Documentation/watchdog/watchdog-api.txt b/Documentation/watchdog/watchdog-api.txt index 21ed511..d738ec2 100644 --- a/Documentation/watchdog/watchdog-api.txt +++ b/Documentation/watchdog/watchdog-api.txt @@ -110,7 +110,40 @@ current timeout using the GETTIMEOUT ioc ioctl(fd, WDIOC_GETTIMEOUT, &timeout); printf("The timeout was is %d seconds\n", timeout); -Envinronmental monitoring: +Pretimeouts: + +Some watchdog timers can be set to have a trigger go off before the +actual time they will reset the system. This can be done with an NMI, +interrupt, or other mechanism. This allows Linux to record useful +information (like panic information and kernel coredumps) before it +resets. + + pretimeout = 10; + ioctl(fd, WDIOC_SETPRETIMEOUT, &pretimeout); + +Note that the pretimeout is the number of seconds before the time +when the timeout will go off. It is not the number of seconds until +the pretimeout. So, for instance, if you set the timeout to 60 seconds +and the pretimeout to 10 seconds, the pretimout will go of in 50 +seconds. Setting a pretimeout to zero disables it. + +There is also a get function for getting the pretimeout: + + ioctl(fd, WDIOC_GETPRETIMEOUT, &timeout); + printf("The pretimeout was is %d seconds\n", timeout); + +Not all watchdog drivers will support a pretimeout. + +Get the number of seconds before reboot: + +Some watchdog drivers have the ability to report the remaining time +before the system will reboot. The WDIOC_GETTIMELEFT is the ioctl +that returns the number of seconds before reboot. + + ioctl(fd, WDIOC_GETTIMELEFT, &timeleft); + printf("The timeout was is %d seconds\n", timeleft); + +Environmental monitoring: All watchdog drivers are required return more information about the system, some do temperature, fan and power level monitoring, some can tell you @@ -169,6 +202,10 @@ The watchdog saw a keepalive ping since WDIOF_SETTIMEOUT Can set/get the timeout +The watchdog can do pretimeouts. + + WDIOF_PRETIMEOUT Pretimeout (in seconds), get/set + For those drivers that return any bits set in the option field, the GETSTATUS and GETBOOTSTATUS ioctls can be used to ask for the current diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig index d53f664..1b27674 100644 --- a/drivers/char/watchdog/Kconfig +++ b/drivers/char/watchdog/Kconfig @@ -298,6 +298,27 @@ config I8XX_TCO To compile this driver as a module, choose M here: the module will be called i8xx_tco. +config ITCO_WDT + tristate "Intel TCO Timer/Watchdog (EXPERIMENTAL)" + depends on WATCHDOG && (X86 || IA64) && PCI && EXPERIMENTAL + ---help--- + Hardware driver for the intel TCO timer based watchdog devices. + These drivers are included in the Intel 82801 I/O Controller + Hub family 'from ICH0 up to ICH7) and in the Intel 6300ESB + controller hub. + + The TCO (Total Cost of Ownership) timer is a watchdog timer + that will reboot the machine after its second expiration. The + expiration time can be configured with the "heartbeat" parameter. + + On some motherboards the driver may fail to reset the chipset's + NO_REBOOT flag which prevents the watchdog from rebooting the + machine. If this is the case you will get a kernel message like + "failed to reset NO_REBOOT flag, reboot disabled by hardware". + + To compile this driver as a module, choose M here: the + module will be called iTCO_wdt. + config SC1200_WDT tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog" depends on WATCHDOG && X86 diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile index 6ab77b6..53ddcb2 100644 --- a/drivers/char/watchdog/Makefile +++ b/drivers/char/watchdog/Makefile @@ -45,6 +45,7 @@ obj-$(CONFIG_IBMASR) += ibmasr.o obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o obj-$(CONFIG_I8XX_TCO) += i8xx_tco.o +obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o diff --git a/drivers/char/watchdog/i8xx_tco.c b/drivers/char/watchdog/i8xx_tco.c index fa2ba9e..bfbdbbf 100644 --- a/drivers/char/watchdog/i8xx_tco.c +++ b/drivers/char/watchdog/i8xx_tco.c @@ -205,6 +205,23 @@ static int tco_timer_set_heartbeat (int return 0; } +static int tco_timer_get_timeleft (int *time_left) +{ + unsigned char val; + + spin_lock(&tco_lock); + + /* read the TCO Timer */ + val = inb (TCO1_RLD); + val &= 0x3f; + + spin_unlock(&tco_lock); + + *time_left = (int)((val * 6) / 10); + + return 0; +} + /* * /dev/watchdog handling */ @@ -272,6 +289,7 @@ static int i8xx_tco_ioctl (struct inode { int new_options, retval = -EINVAL; int new_heartbeat; + int time_left; void __user *argp = (void __user *)arg; int __user *p = argp; static struct watchdog_info ident = { @@ -320,7 +338,7 @@ static int i8xx_tco_ioctl (struct inode return -EFAULT; if (tco_timer_set_heartbeat(new_heartbeat)) - return -EINVAL; + return -EINVAL; tco_timer_keepalive (); /* Fall */ @@ -329,6 +347,14 @@ static int i8xx_tco_ioctl (struct inode case WDIOC_GETTIMEOUT: return put_user(heartbeat, p); + case WDIOC_GETTIMELEFT: + { + if (tco_timer_get_timeleft(&time_left)) + return -EINVAL; + + return put_user(time_left, p); + } + default: return -ENOIOCTLCMD; } diff --git a/drivers/char/watchdog/iTCO_wdt.c b/drivers/char/watchdog/iTCO_wdt.c new file mode 100644 index 0000000..c1a5787 --- /dev/null +++ b/drivers/char/watchdog/iTCO_wdt.c @@ -0,0 +1,706 @@ +/* + * intel TCO Watchdog Driver (Used in i82801 and i6300ESB chipsets) + * + * (c) Copyright 2006 Wim Van Sebroeck . + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + * The TCO watchdog is implemented in the following I/O controller hubs: + * (See the intel documentation on http://developer.intel.com.) + * 82801AA (ICH) : document number 290655-003, 290677-014, + * 82801AB (ICHO) : document number 290655-003, 290677-014, + * 82801BA (ICH2) : document number 290687-002, 298242-027, + * 82801BAM (ICH2-M) : document number 290687-002, 298242-027, + * 82801CA (ICH3-S) : document number 290733-003, 290739-013, + * 82801CAM (ICH3-M) : document number 290716-001, 290718-007, + * 82801DB (ICH4) : document number 290744-001, 290745-020, + * 82801DBM (ICH4-M) : document number 252337-001, 252663-005, + * 82801E (C-ICH) : document number 273599-001, 273645-002, + * 82801EB (ICH5) : document number 252516-001, 252517-003, + * 82801ER (ICH5R) : document number 252516-001, 252517-003, + * 82801FB (ICH6) : document number 301473-002, 301474-007, + * 82801FR (ICH6R) : document number 301473-002, 301474-007, + * 82801FBM (ICH6-M) : document number 301473-002, 301474-007, + * 82801FW (ICH6W) : document number 301473-001, 301474-007, + * 82801FRW (ICH6RW) : document number 301473-001, 301474-007, + * 82801GB (ICH7) : document number 307013-002, 307014-009, + * 82801GR (ICH7R) : document number 307013-002, 307014-009, + * 82801GDH (ICH7DH) : document number 307013-002, 307014-009, + * 82801GBM (ICH7-M) : document number 307013-002, 307014-009, + * 82801GHM (ICH7-M DH) : document number 307013-002, 307014-009, + * 6300ESB (6300ESB) : document number 300641-003 + */ + +/* + * Includes, defines, variables, module parameters, ... + */ + +/* Module and version information */ +#define DRV_NAME "iTCO_wdt" +#define DRV_VERSION "1.00" +#define DRV_RELDATE "21-May-2006" +#define PFX DRV_NAME ": " + +/* Includes */ +#include /* For CONFIG_WATCHDOG_NOWAYOUT/... */ +#include /* For module specific items */ +#include /* For new moduleparam's */ +#include /* For standard types (like size_t) */ +#include /* For the -ENODEV/... values */ +#include /* For printk/panic/... */ +#include /* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */ +#include /* For the watchdog specific items */ +#include /* For notifier support */ +#include /* For reboot_notifier stuff */ +#include /* For __init/__exit/... */ +#include /* For file operations */ +#include /* For pci functions */ +#include /* For io-port access */ +#include /* For spin_lock/spin_unlock/... */ + +#include /* For copy_to_user/put_user/... */ +#include /* For inb/outb/... */ + +/* TCO related info */ +enum iTCO_chipsets { + TCO_ICH = 0, /* ICH */ + TCO_ICH0, /* ICH0 */ + TCO_ICH2, /* ICH2 */ + TCO_ICH2M, /* ICH2-M */ + TCO_ICH3, /* ICH3-S */ + TCO_ICH3M, /* ICH3-M */ + TCO_ICH4, /* ICH4 */ + TCO_ICH4M, /* ICH4-M */ + TCO_CICH, /* C-ICH */ + TCO_ICH5, /* ICH5 & ICH5R */ + TCO_6300ESB, /* 6300ESB */ + TCO_ICH6, /* ICH6 & ICH6R */ + TCO_ICH6M, /* ICH6-M */ + TCO_ICH6W, /* ICH6W & ICH6RW */ + TCO_ICH7, /* ICH7 & ICH7R */ + TCO_ICH7M, /* ICH7-M */ + TCO_ICH7MDH, /* ICH7-M DH */ +}; + +static struct { + char *name; + unsigned int iTCO_version; +} iTCO_chipset_info[] __devinitdata = { + {"ICH", 1}, + {"ICH0", 1}, + {"ICH2", 1}, + {"ICH2-M", 1}, + {"ICH3-S", 1}, + {"ICH3-M", 1}, + {"ICH4", 1}, + {"ICH4-M", 1}, + {"C-ICH", 1}, + {"ICH5 or ICH5R", 1}, + {"6300ESB", 1}, + {"ICH6 or ICH6R", 2}, + {"ICH6-M", 2}, + {"ICH6W or ICH6RW", 2}, + {"ICH7 or ICH7R", 2}, + {"ICH7-M", 2}, + {"ICH7-M DH", 2}, + {NULL,0} +}; + +/* + * This data only exists for exporting the supported PCI ids + * via MODULE_DEVICE_TABLE. We do not actually register a + * pci_driver, because the I/O Controller Hub has also other + * functions that probably will be registered by other drivers. + */ +static struct pci_device_id iTCO_wdt_pci_tbl[] = { + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH0 }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH2 }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH2M }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH3 }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH3M }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH4 }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH4M }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801E_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_CICH }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH5 }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_6300ESB }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH6 }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH6M }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH6W }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7 }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7M }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7MDH }, + { 0, }, /* End of list */ +}; +MODULE_DEVICE_TABLE (pci, iTCO_wdt_pci_tbl); + +/* Address definitions for the TCO */ +#define TCOBASE iTCO_wdt_private.ACPIBASE + 0x60 /* TCO base address */ +#define SMI_EN iTCO_wdt_private.ACPIBASE + 0x30 /* SMI Control and Enable Register */ + +#define TCO_RLD TCOBASE + 0x00 /* TCO Timer Reload and Current Value */ +#define TCOv1_TMR TCOBASE + 0x01 /* TCOv1 Timer Initial Value */ +#define TCO_DAT_IN TCOBASE + 0x02 /* TCO Data In Register */ +#define TCO_DAT_OUT TCOBASE + 0x03 /* TCO Data Out Register */ +#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */ +#define TCO2_STS TCOBASE + 0x06 /* TCO2 Status Register */ +#define TCO1_CNT TCOBASE + 0x08 /* TCO1 Control Register */ +#define TCO2_CNT TCOBASE + 0x0a /* TCO2 Control Register */ +#define TCOv2_TMR TCOBASE + 0x12 /* TCOv2 Timer Initial Value */ + +/* internal variables */ +static unsigned long is_active; +static char expect_release; +static struct { /* this is private data for the iTCO_wdt device */ + unsigned int iTCO_version; /* TCO version/generation */ + unsigned long ACPIBASE; /* The cards ACPIBASE address (TCOBASE = ACPIBASE+0x60) */ + unsigned long __iomem *gcs; /* NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2) */ + spinlock_t io_lock; /* the lock for io operations */ + struct pci_dev *pdev; /* the PCI-device */ +} iTCO_wdt_private; + +/* module parameters */ +#define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */ +static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */ +module_param(heartbeat, int, 0); +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2 0 = The TCO timer is enabled to count */ + val = inw(TCO1_CNT); + val &= 0xf7ff; + outw(val, TCO1_CNT); + val = inw(TCO1_CNT); + spin_unlock(&iTCO_wdt_private.io_lock); + + if (val & 0x0800) + return -1; + return 0; +} + +static int iTCO_wdt_stop(void) +{ + unsigned int val; + + spin_lock(&iTCO_wdt_private.io_lock); + + /* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */ + val = inw(TCO1_CNT); + val |= 0x0800; + outw(val, TCO1_CNT); + val = inw(TCO1_CNT); + + /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ + iTCO_wdt_set_NO_REBOOT_bit(); + + spin_unlock(&iTCO_wdt_private.io_lock); + + if ((val & 0x0800) == 0) + return -1; + return 0; +} + +static int iTCO_wdt_keepalive(void) +{ + spin_lock(&iTCO_wdt_private.io_lock); + + /* Reload the timer by writing to the TCO Timer Counter register */ + if (iTCO_wdt_private.iTCO_version == 2) { + outw(0x01, TCO_RLD); + } else if (iTCO_wdt_private.iTCO_version == 1) { + outb(0x01, TCO_RLD); + } + + spin_unlock(&iTCO_wdt_private.io_lock); + return 0; +} + +static int iTCO_wdt_set_heartbeat(int t) +{ + unsigned int val16; + unsigned char val8; + unsigned int tmrval; + + tmrval = seconds_to_ticks(t); + /* from the specs: */ + /* "Values of 0h-3h are ignored and should not be attempted" */ + if (tmrval < 0x04) + return -EINVAL; + if (((iTCO_wdt_private.iTCO_version == 2) && (tmrval > 0x3ff)) || + ((iTCO_wdt_private.iTCO_version == 1) && (tmrval > 0x03f))) + return -EINVAL; + + /* Write new heartbeat to watchdog */ + if (iTCO_wdt_private.iTCO_version == 2) { + spin_lock(&iTCO_wdt_private.io_lock); + val16 = inw(TCOv2_TMR); + val16 &= 0xfc00; + val16 |= tmrval; + outw(val16, TCOv2_TMR); + val16 = inw(TCOv2_TMR); + spin_unlock(&iTCO_wdt_private.io_lock); + + if ((val16 & 0x3ff) != tmrval) + return -EINVAL; + } else if (iTCO_wdt_private.iTCO_version == 1) { + spin_lock(&iTCO_wdt_private.io_lock); + val8 = inb(TCOv1_TMR); + val8 &= 0xc0; + val8 |= (tmrval & 0xff); + outb(val8, TCOv1_TMR); + val8 = inb(TCOv1_TMR); + spin_unlock(&iTCO_wdt_private.io_lock); + + if ((val8 & 0x3f) != tmrval) + return -EINVAL; + } + + heartbeat = t; + return 0; +} + +static int iTCO_wdt_get_timeleft (int *time_left) +{ + unsigned int val16; + unsigned char val8; + + /* read the TCO Timer */ + if (iTCO_wdt_private.iTCO_version == 2) { + spin_lock(&iTCO_wdt_private.io_lock); + val16 = inw(TCO_RLD); + val16 &= 0x3ff; + spin_unlock(&iTCO_wdt_private.io_lock); + + *time_left = (val16 * 6) / 10; + } else if (iTCO_wdt_private.iTCO_version == 1) { + spin_lock(&iTCO_wdt_private.io_lock); + val8 = inb(TCO_RLD); + val8 &= 0x3f; + spin_unlock(&iTCO_wdt_private.io_lock); + + *time_left = (val8 * 6) / 10; + } + return 0; +} + +/* + * /dev/watchdog handling + */ + +static int iTCO_wdt_open (struct inode *inode, struct file *file) +{ + /* /dev/watchdog can only be opened once */ + if (test_and_set_bit(0, &is_active)) + return -EBUSY; + + /* + * Reload and activate timer + */ + iTCO_wdt_keepalive(); + iTCO_wdt_start(); + return nonseekable_open(inode, file); +} + +static int iTCO_wdt_release (struct inode *inode, struct file *file) +{ + /* + * Shut off the timer. + */ + if (expect_release == 42) { + iTCO_wdt_stop(); + } else { + printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); + iTCO_wdt_keepalive(); + } + clear_bit(0, &is_active); + expect_release = 0; + return 0; +} + +static ssize_t iTCO_wdt_write (struct file *file, const char __user *data, + size_t len, loff_t * ppos) +{ + /* See if we got the magic character 'V' and reload the timer */ + if (len) { + if (!nowayout) { + size_t i; + + /* note: just in case someone wrote the magic character + * five months ago... */ + expect_release = 0; + + /* scan to see whether or not we got the magic character */ + for (i = 0; i != len; i++) { + char c; + if (get_user(c, data+i)) + return -EFAULT; + if (c == 'V') + expect_release = 42; + } + } + + /* someone wrote to us, we should reload the timer */ + iTCO_wdt_keepalive(); + } + return len; +} + +static int iTCO_wdt_ioctl (struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + int new_options, retval = -EINVAL; + int new_heartbeat; + int time_left; + void __user *argp = (void __user *)arg; + int __user *p = argp; + static struct watchdog_info ident = { + .options = WDIOF_SETTIMEOUT | + WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, + .firmware_version = 0, + .identity = DRV_NAME, + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, + sizeof (ident)) ? -EFAULT : 0; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + + case WDIOC_KEEPALIVE: + iTCO_wdt_keepalive(); + return 0; + + case WDIOC_SETOPTIONS: + { + if (get_user(new_options, p)) + return -EFAULT; + + if (new_options & WDIOS_DISABLECARD) { + iTCO_wdt_stop(); + retval = 0; + } + + if (new_options & WDIOS_ENABLECARD) { + iTCO_wdt_keepalive(); + iTCO_wdt_start(); + retval = 0; + } + + return retval; + } + + case WDIOC_SETTIMEOUT: + { + if (get_user(new_heartbeat, p)) + return -EFAULT; + + if (iTCO_wdt_set_heartbeat(new_heartbeat)) + return -EINVAL; + + iTCO_wdt_keepalive(); + /* Fall */ + } + + case WDIOC_GETTIMEOUT: + return put_user(heartbeat, p); + + case WDIOC_GETTIMELEFT: + { + if (iTCO_wdt_get_timeleft(&time_left)) + return -EINVAL; + + return put_user(time_left, p); + } + + default: + return -ENOIOCTLCMD; + } +} + +/* + * Notify system + */ + +static int iTCO_wdt_notify_sys (struct notifier_block *this, unsigned long code, void *unused) +{ + if (code==SYS_DOWN || code==SYS_HALT) { + /* Turn the WDT off */ + iTCO_wdt_stop(); + } + + return NOTIFY_DONE; +} + +/* + * Kernel Interfaces + */ + +static struct file_operations iTCO_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = iTCO_wdt_write, + .ioctl = iTCO_wdt_ioctl, + .open = iTCO_wdt_open, + .release = iTCO_wdt_release, +}; + +static struct miscdevice iTCO_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &iTCO_wdt_fops, +}; + +static struct notifier_block iTCO_wdt_notifier = { + .notifier_call = iTCO_wdt_notify_sys, +}; + +/* + * Init & exit routines + */ + +static int __init iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int ret; + u32 base_address; + unsigned long RCBA; + unsigned long val32; + + /* + * Find the ACPI/PM base I/O address which is the base + * for the TCO registers (TCOBASE=ACPIBASE + 0x60) + * ACPIBASE is bits [15:7] from 0x40-0x43 + */ + pci_read_config_dword(pdev, 0x40, &base_address); + base_address &= 0x00007f80; + if (base_address == 0x00000000) { + /* Something's wrong here, ACPIBASE has to be set */ + printk(KERN_ERR PFX "failed to get TCOBASE address\n"); + return -ENODEV; + } + iTCO_wdt_private.iTCO_version = iTCO_chipset_info[ent->driver_data].iTCO_version; + iTCO_wdt_private.ACPIBASE = base_address; + iTCO_wdt_private.pdev = pdev; + + /* Get the Memory-Mapped GCS register, we need it for the NO_REBOOT flag (TCO v2) */ + /* To get access to it you have to read RCBA from PCI Config space 0xf0 + and use it as base. GCS = RCBA + ICH6_GCS(0x3410). */ + if (iTCO_wdt_private.iTCO_version == 2) { + pci_read_config_dword(pdev, 0xf0, &base_address); + RCBA = base_address & 0xffffc000; + iTCO_wdt_private.gcs = ioremap((RCBA + 0x3410),4); + } + + /* Check chipset's NO_REBOOT bit */ + if (iTCO_wdt_unset_NO_REBOOT_bit()) { + printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot disabled by hardware\n"); + ret = -ENODEV; /* Cannot reset NO_REBOOT bit */ + goto out; + } + + /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ + iTCO_wdt_set_NO_REBOOT_bit(); + + /* Set the TCO_EN bit in SMI_EN register */ + if (!request_region(SMI_EN, 4, "iTCO_wdt")) { + printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n", + SMI_EN ); + ret = -EIO; + goto out; + } + val32 = inl(SMI_EN); + val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ + outl(val32, SMI_EN); + release_region(SMI_EN, 4); + + /* The TCO I/O registers reside in a 32-byte range pointed to by the TCOBASE value */ + if (!request_region (TCOBASE, 0x20, "iTCO_wdt")) { + printk (KERN_ERR PFX "I/O address 0x%04lx already in use\n", + TCOBASE); + ret = -EIO; + goto out; + } + + printk(KERN_INFO PFX "Found a %s TCO device (Version=%d, TCOBASE=0x%04lx)\n", + iTCO_chipset_info[ent->driver_data].name, + iTCO_chipset_info[ent->driver_data].iTCO_version, + TCOBASE); + + /* Clear out the (probably old) status */ + outb(0, TCO1_STS); + outb(3, TCO2_STS); + + /* Make sure the watchdog is not running */ + iTCO_wdt_stop(); + + /* Check that the heartbeat value is within it's range ; if not reset to the default */ + if (iTCO_wdt_set_heartbeat(heartbeat)) { + iTCO_wdt_set_heartbeat(WATCHDOG_HEARTBEAT); + printk(KERN_INFO PFX "heartbeat value must be 2"); +MODULE_DESCRIPTION("Intel TCO WatchDog Timer Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); diff --git a/drivers/char/watchdog/pcwd_pci.c b/drivers/char/watchdog/pcwd_pci.c index 2451edb..1f40ece 100644 --- a/drivers/char/watchdog/pcwd_pci.c +++ b/drivers/char/watchdog/pcwd_pci.c @@ -21,7 +21,7 @@ */ /* - * A bells and whistles driver is available from: + * A bells and whistles driver is available from: * http://www.kernel.org/pub/linux/kernel/people/wim/pcwd/pcwd_pci/ * * More info available at http://www.berkprod.com/ or http://www.pcwatchdog.com/ @@ -390,6 +390,24 @@ static int pcipcwd_get_temperature(int * return 0; } +static int pcipcwd_get_timeleft(int *time_left) +{ + int msb; + int lsb; + + /* Read the time that's left before rebooting */ + /* Note: if the board is not yet armed then we will read 0xFFFF */ + send_command(CMD_READ_WATCHDOG_TIMEOUT, &msb, &lsb); + + *time_left = (msb << 8) + lsb; + + if (debug >= VERBOSE) + printk(KERN_DEBUG PFX "Time left before next reboot: %d\n", + *time_left); + + return 0; +} + /* * /dev/watchdog handling */ @@ -512,6 +530,16 @@ static int pcipcwd_ioctl(struct inode *i case WDIOC_GETTIMEOUT: return put_user(heartbeat, p); + case WDIOC_GETTIMELEFT: + { + int time_left; + + if (pcipcwd_get_timeleft(&time_left)) + return -EFAULT; + + return put_user(time_left, p); + } + default: return -ENOIOCTLCMD; } diff --git a/drivers/char/watchdog/pcwd_usb.c b/drivers/char/watchdog/pcwd_usb.c index 3fdfda9..0d072be 100644 --- a/drivers/char/watchdog/pcwd_usb.c +++ b/drivers/char/watchdog/pcwd_usb.c @@ -317,6 +317,19 @@ static int usb_pcwd_get_temperature(stru return 0; } +static int usb_pcwd_get_timeleft(struct usb_pcwd_private *usb_pcwd, int *time_left) +{ + unsigned char msb, lsb; + + /* Read the time that's left before rebooting */ + /* Note: if the board is not yet armed then we will read 0xFFFF */ + usb_pcwd_send_command(usb_pcwd, CMD_READ_WATCHDOG_TIMEOUT, &msb, &lsb); + + *time_left = (msb << 8) + lsb; + + return 0; +} + /* * /dev/watchdog handling */ @@ -422,6 +435,16 @@ static int usb_pcwd_ioctl(struct inode * case WDIOC_GETTIMEOUT: return put_user(heartbeat, p); + case WDIOC_GETTIMELEFT: + { + int time_left; + + if (usb_pcwd_get_timeleft(usb_pcwd_device, &time_left)) + return -EFAULT; + + return put_user(time_left, p); + } + default: return -ENOIOCTLCMD; } diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h index 1192ed8..011bcfe 100644 --- a/include/linux/watchdog.h +++ b/include/linux/watchdog.h @@ -28,6 +28,9 @@ #define WDIOC_SETOPTIONS _IOR(WATCHDOG_I #define WDIOC_KEEPALIVE _IOR(WATCHDOG_IOCTL_BASE, 5, int) #define WDIOC_SETTIMEOUT _IOWR(WATCHDOG_IOCTL_BASE, 6, int) #define WDIOC_GETTIMEOUT _IOR(WATCHDOG_IOCTL_BASE, 7, int) +#define WDIOC_SETPRETIMEOUT _IOWR(WATCHDOG_IOCTL_BASE, 8, int) +#define WDIOC_GETPRETIMEOUT _IOR(WATCHDOG_IOCTL_BASE, 9, int) +#define WDIOC_GETTIMELEFT _IOR(WATCHDOG_IOCTL_BASE, 10, int) #define WDIOF_UNKNOWN -1 /* Unknown flag error */ #define WDIOS_UNKNOWN -1 /* Unknown status error */ @@ -38,9 +41,10 @@ #define WDIOF_EXTERN1 0x0004 /* Externa #define WDIOF_EXTERN2 0x0008 /* External relay 2 */ #define WDIOF_POWERUNDER 0x0010 /* Power bad/power fault */ #define WDIOF_CARDRESET 0x0020 /* Card previously reset the CPU */ -#define WDIOF_POWEROVER 0x0040 /* Power over voltage */ -#define WDIOF_SETTIMEOUT 0x0080 /* Set timeout (in seconds) */ -#define WDIOF_MAGICCLOSE 0x0100 /* Supports magic close char */ +#define WDIOF_POWEROVER 0x0040 /* Power over voltage */ +#define WDIOF_SETTIMEOUT 0x0080 /* Set timeout (in seconds) */ +#define WDIOF_MAGICCLOSE 0x0100 /* Supports magic close char */ +#define WDIOF_PRETIMEOUT 0x0200 /* Pretimeout (in seconds), get/set */ #define WDIOF_KEEPALIVEPING 0x8000 /* Keep alive ping reply */ #define WDIOS_DISABLECARD 0x0001 /* Turn off the watchdog timer */