GIT 9a1fcdfd4bee27c418424cac47abf7c049541297 git://git.infradead.org/mtd-2.6.git commit 9a1fcdfd4bee27c418424cac47abf7c049541297 Author: Thomas Gleixner Date: Mon May 29 14:56:39 2006 +0200 [MTD] NAND Signal that a bitflip was corrected by ECC Return -EUCLEAN on read when a bitflip was detected and corrected, so the clients can react and eventually copy the affected block to a spare one. Make all in kernel users aware of the change. Signed-off-by: Thomas Gleixner commit 8593fbc68b0df1168995de76d1af38eb62fd6b62 Author: Thomas Gleixner Date: Mon May 29 03:26:58 2006 +0200 [MTD] Rework the out of band handling completely Hopefully the last iteration on this! The handling of out of band data on NAND was accompanied by tons of fruitless discussions and halfarsed patches to make it work for a particular problem. Sufficiently annoyed by I all those "I know it better" mails and the resonable amount of discarded "it solves my problem" patches, I finally decided to go for the big rework. After removing the _ecc variants of mtd read/write functions the solution to satisfy the various requirements was to refactor the read/write _oob functions in mtd. The major change is that read/write_oob now takes a pointer to an operation descriptor structure "struct mtd_oob_ops".instead of having a function with at least seven arguments. read/write_oob which should probably renamed to a more descriptive name, can do the following tasks: - read/write out of band data - read/write data content and out of band data - read/write raw data content and out of band data (ecc disabled) struct mtd_oob_ops has a mode field, which determines the oob handling mode. Aside of the MTD_OOB_RAW mode, which is intended to be especially for diagnostic purposes and some internal functions e.g. bad block table creation, the other two modes are for mtd clients: MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's up to the caller to make sure that the byte positions are not used by the ECC placement algorithms. MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in the out of band area which are described by the oobfree tuples in the ecclayout data structre which is associated to the devicee. The decision whether data plus oob or oob only handling is done depends on the setting of the datbuf member of the data structure. When datbuf == NULL then the internal read/write_oob functions are selected, otherwise the read/write data routines are invoked. Tested on a few platforms with all variants. Please be aware of possible regressions for your particular device / application scenario Disclaimer: Any whining will be ignored from those who just contributed "hot air blurb" and never sat down to tackle the underlying problem of the mess in the NAND driver grown over time and the big chunk of work to fix up the existing users. The problem was not the holiness of the existing MTD interfaces. The problems was the lack of time to go for the big overhaul. It's easy to add more mess to the existing one, but it takes alot of effort to go for a real solution. Improvements and bugfixes are welcome! Signed-off-by: Thomas Gleixner commit f4a43cfcecfcaeeaa40a9dbc1d1378298c22446e Author: Thomas Gleixner Date: Sun May 28 11:01:53 2006 +0200 [MTD] Remove silly MTD_WRITE/READ macros Most of those macros are unused and the used ones just obfuscate the code. Remove them and fixup all users. Signed-off-by: Thomas Gleixner commit 5bd34c091a044d130601370c370f84b1c59f1627 Author: Thomas Gleixner Date: Sat May 27 22:16:10 2006 +0200 [MTD] NAND Replace oobinfo by ecclayout The nand_oobinfo structure is not fitting the newer error correction demands anymore. Replace it by struct nand_ecclayout and fixup the users all over the place. Keep the nand_oobinfo based ioctl for user space compability reasons. Signed-off-by: Thomas Gleixner commit ff268fb8791cf18df536113355d7184007c269d9 Author: Thomas Gleixner Date: Sat May 27 20:36:12 2006 +0200 [MTD] NAND Consolidate oobinfo handling The info structure for out of band data was copied into the mtd structure. Make it a pointer and remove the ability to set it from userspace. The position of ecc bytes is defined by the hardware and should not be changed by software. Signed-off-by: Thomas Gleixner commit 8be834f76291fdcc0614cb84926c6910b9f2ecbc Author: Thomas Gleixner Date: Sat May 27 20:05:26 2006 +0200 [MTD] NAND Fix platform structure and NDFC driver The platform structure was lacking an oobinfo field. The NDFC driver had some remains from another tree. Signed-off-by: Thomas Gleixner commit 19676ff0a64af9d75d48f17cb67bee8110f6ffbf Author: Andrew Morton Date: Mon May 29 11:33:33 2006 +0100 [MTD] Fix debug printk format warning in m25p80 SPI chip driver, again. Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse commit 33280eac704e3e156eef2fa9ed9ddf427a1c223c Author: David Woodhouse Date: Mon May 29 11:24:29 2006 +0100 [MTD] AMD Geode NAND support can depend on X86_32; we won't see it on x86_64 Signed-off-by: David Woodhouse commit a6a8bef722875a95bb73e6de7da924a8d417b52c Author: David Woodhouse Date: Mon May 29 00:41:11 2006 +0100 [JFFS2] Preallocate raw_node_refs in a couple of missing places in scan Signed-off-by: David Woodhouse commit 2ebf09c2491433a499e0ae7723d04e9e810afa84 Author: David Woodhouse Date: Sun May 28 22:13:25 2006 +0100 [JFFS2] Fix oops when marking space dirty in scan, but no previous node exists. Signed-off-by: David Woodhouse commit ddc58bd65ebe58c243e9f609384825df9ffd04ad Author: David Woodhouse Date: Sat May 27 13:15:16 2006 +0100 [JFFS2] Fix wbuf recovery of f->metadata->raw node. A data node might not be in the fraglist; it could be f->metadata. Signed-off-by: David Woodhouse commit ba0251fe87ea560eb377917e06ba0b5b9ab89094 Author: Thomas Gleixner Date: Sat May 27 01:02:13 2006 +0200 [MTD] NAND Consolidate references and add back default name setting We have a type pointer. Make use of it instead of the error prone nand_ids[i] reference. The NAND driver used to set default name settings from the chip ID string for the device. The feature got lost during the rework. Add it back. Signed-off-by: Thomas Gleixner commit cca3b837bbb4c984165f9f9c7c06846bc0425791 Author: Thomas Gleixner Date: Sat May 27 00:47:18 2006 +0200 [MTD] NAND simplify nand_chip_select nCE setting can be done when the first command is issued to the device. We keep the deselect functionality as it makes sense to deassert nCE when the device becomes idle. Signed-off-by: Thomas Gleixner commit 29da9cea46f65cb9488641354fe554e9ef8a3a85 Author: David Woodhouse Date: Fri May 26 23:05:44 2006 +0100 [MTD] Fix thinko in nand_write_page_hwecc() Signed-off-by: Thomas Gleixner Signed-off-by: David Woodhouse commit 9bfeb691e75b21fdaa80ffae719083200b190381 Author: David Woodhouse Date: Fri May 26 21:19:05 2006 +0100 [JFFS2] Switch to using an array of jffs2_raw_node_refs instead of a list. This allows us to drop another pointer from the struct jffs2_raw_node_ref, shrinking it to 8 bytes on 32-bit machines (if the TEST_TOTLEN) paranoia check is turned off, which will be committed soon). Signed-off-by: David Woodhouse commit f75e5097ef298c5a0aa106faa211d1afdc92dc3d Author: Thomas Gleixner Date: Fri May 26 18:52:08 2006 +0200 [MTD] NAND modularize write function Modularize the write function and reorganaize the internal buffer management. Remove obsolete chip options and fixup all affected users. Signed-off-by: Thomas Gleixner commit e4d222ff18bca6322f032088a21e9c4a4c038b85 Author: David Woodhouse Date: Fri May 26 02:06:27 2006 +0100 [MTD] Remove PCI dependency for Geode CS553[56] NAND controller. PCI is faked on these devices by SMM traps. Don't depend on that -- check for the chipset directly instead. Signed-off-by: David Woodhouse commit 89291a9d5b70778e49e2563247c6c7e3efac9b14 Author: David Woodhouse Date: Thu May 25 13:30:24 2006 +0100 [JFFS2] Fix 64-bit size_t problems in XATTR code. Signed-off-by: David Woodhouse commit c5b553cc2c36f770086a37764f7a06dd615eda8f Author: David Woodhouse Date: Thu May 25 13:25:17 2006 +0100 [MTD] Fix NAND_VERIFY_WRITE case to build with tglx's recent changes Bad tglx. No biscuit. Signed-off-by: David Woodhouse commit 8546ac4f84b252fff078fab1a992c70504147914 Author: Thomas Gleixner Date: Thu May 25 13:38:45 2006 +0200 [MTD] Remove the only useless readv implementation Removing readv from struct mtd_info broke block2mtd. Remove the reference and the useless default implementation. Signed-off-by: Thomas Gleixner commit f5bbdacc41939f89d8ccb18dd79cd9b21c0cb75d Author: Thomas Gleixner Date: Thu May 25 10:07:16 2006 +0200 [MTD] NAND Modularize read function Split the core of the read function out and implement seperate handling functions for software and hardware ECC. Signed-off-by: Thomas Gleixner commit 9577f44a899cf4acb9e381c8946307b72153cd15 Author: Thomas Gleixner Date: Thu May 25 10:04:31 2006 +0200 [MTD] NAND Add read/write function pointers to struct nand_ecc_ctrl Add read/write function pointers to struct nand_ecc_ctrl to prepare the modulaization of nand_read/write functions. The current implementation handles every type of ecc mode software/hardware and all kinds of strange ecc placement schemes in one switch/if construct. Thats too complex to maintain and too inflexible to expand. Modularization will also shorten the code pathes of the read/write functions. Signed-off-by: Thomas Gleixner commit 7fac464868ec5d80019fa549b8b4516dd1dc9d5c Author: Thomas Gleixner Date: Thu May 25 09:57:31 2006 +0200 [MTD] Add ECC statistics to struct mtd_info FLASH - especially NAND FLASH - will become less reliable and bit flips more likely. Add an ECC statistics struct to struct mtd_info to keep track of this. Signed-off-by: Thomas Gleixner commit 7314e9e7d57293c58b3e10a25a8a1d9328444187 Author: Thomas Gleixner Date: Thu May 25 09:51:54 2006 +0200 [MTD] NAND Cleanup oob functions Cleanup the code in the oob related functions and make use of the new NO_READRDY flag. Signed-off-by: Thomas Gleixner commit 7a30601b3ac7b02440ffa629fd3d2cca71c1bcd8 Author: Thomas Gleixner Date: Thu May 25 09:50:16 2006 +0200 [MTD] NAND Introduce NAND_NO_READRDY option The nand driver has a superflous read ready / command delay in the read functions. This was added to handle chips which have an automatic read forward. Newer chips do not have this functionality anymore. Add this option to avoid the delay / I/O operation. Mark all large page chips with the new option flag. Signed-off-by: Thomas Gleixner commit 04bbd0eafb0c733c6c7f5d63c5098c615fe0685a Author: Thomas Gleixner Date: Thu May 25 09:45:29 2006 +0200 [MTD] NAND Initialize controller lock and wq only once The lock simplifying patch did not move the lock and waitqueue initialization into the controller allocation patch. This reinitializes waitqueue and spinlocks also for driver supplied controller stuctures. Move it into the allocation path. Signed-off-by: Thomas Gleixner commit 8b9e9fe8c6ee354aa75dc5a33e1575b21aa52084 Author: David Woodhouse Date: Thu May 25 01:53:09 2006 +0100 [JFFS2] Fix and improve debugging output during scan. Print wasted_size in scanned eraseblocks, print range correctly for summary dirent and inode entries. Signed-off-by: David Woodhouse commit 046b8b9808127d63326a33bc6298c90eaee90eeb Author: David Woodhouse Date: Thu May 25 01:50:35 2006 +0100 [JFFS2] Add 'jeb' argument to jffs2_prealloc_raw_node_refs() Preallocation of refs is shortly going to be a per-eraseblock thing, rather than per-filesystem. Add the required argument to the function. Signed-off-by: David Woodhouse commit f61579c33736476e41e296a16c0d4ead4b953187 Author: David Woodhouse Date: Thu May 25 01:42:40 2006 +0100 [JFFS2] Correctly handle wasted space before summary node. Signed-off-by: David Woodhouse commit c38c1b613d742b5fa075071568f44dc8ec9f1cb8 Author: David Woodhouse Date: Thu May 25 01:38:27 2006 +0100 [JFFS2] jffs2_free_all_node_refs() doesn't free them all. Rename it. ... to jffs2_free_jeb_node_refs() since that's what it does. Signed-off-by: David Woodhouse commit f560928baa605e8faaa3de6cc1b11ebb645e97db Author: David Woodhouse Date: Thu May 25 01:37:28 2006 +0100 [JFFS2] Allocate node_ref for wasted space when skipping to page boundary One more place where we were changing the accounting info without actually allocating a ref for the lost space... Signed-off-by: David Woodhouse commit 12efdde3139c568a59561b69865fd14f37c75603 Author: Thomas Gleixner Date: Wed May 24 22:57:09 2006 +0200 [MTD] NAND fix cmd_ctrl breakage The cmd_ctrl rework lacks some state transition flags. Signed-off-by: Thomas Gleixner commit ace4dfee56fff184e07d7248a759b574321afa8b Author: Thomas Gleixner Date: Wed May 24 12:07:37 2006 +0200 [MTD] NAND coding style and namespace cleanup Cleanup the functions which are not going to change in the next steps. Signed-off-by: Thomas Gleixner commit c7c16c8e7604a8974d48562fecf8d9c7e221fced Author: David Woodhouse Date: Wed May 24 14:24:02 2006 +0100 [JFFS2] Revert Artem's Bunkage in debug messages. Random unthinking 'cleanup' caused debug messages like this: Obsoleting node at 0x0006daf4 of len 0x3a4: <7>Dirtying If messages are continuation of an existing line, they don't need to be prefixed with KERN_DEBUG. THINK. Or you will be replaced by a small shell script. Signed-off-by: David Woodhouse commit 99988f7bbd16b861590dda4631c4db6cb17b5091 Author: David Woodhouse Date: Wed May 24 09:04:17 2006 +0100 [JFFS2] Introduce ref_next() macro for finding next physical node Another part of the preparation for switching to an array... Signed-off-by: David Woodhouse commit 2f785402f39b96a077b6e62bf26164bfb8e0c980 Author: David Woodhouse Date: Wed May 24 02:04:45 2006 +0100 [JFFS2] Reduce visibility of raw_node_ref to upper layers of JFFS2 code. As the first step towards eliminating the ref->next_phys member and saving memory by using an _array_ of struct jffs2_raw_node_ref per eraseblock, stop the write functions from allocating their own refs; have them just _reserve_ the appropriate number instead. Then jffs2_link_node_ref() can just fill them in. Use a linked list of pre-allocated refs in the superblock, for now. Once we switch to an array, it'll just be a case of extending that array. Signed-off-by: David Woodhouse commit d470a97c70a43ffafd6e728c913254b6d6fd1219 Author: Thomas Gleixner Date: Tue May 23 23:48:57 2006 +0200 [MTD] NAND LED support cleanup Move the define out of the middle of the code and add an appropriate comment. Signed-off-by: Thomas Gleixner commit cad74f2c380411ae7bee997f3ba18834cfe313a2 Author: Thomas Gleixner Date: Tue May 23 23:28:48 2006 +0200 [MTD] NAND remove write_byte/word function from nand_chip The previous change of the command / hardware control allows to remove the write_byte/word functions completely, as their only user were nand_command and nand_command_lp. Signed-off-by: Thomas Gleixner commit 7abd3ef9875eb2afcdcd4f450680298a2983a55e Author: Thomas Gleixner Date: Tue May 23 23:25:53 2006 +0200 [MTD] Refactor NAND hwcontrol to cmd_ctrl The hwcontrol function enforced a step by step state machine for any kind of hardware chip access. Let the hardware driver know which control bits are set and inform it about a change of the control lines. Let the hardware driver write out the command and address bytes directly. This gives a peformance advantage for address bus controlled chips and simplifies the quirks in the hardware drivers. Signed-off-by: Thomas Gleixner commit 3821720d51b5f304d2c33021a82c8da70f6d6ac9 Author: Thomas Gleixner Date: Tue May 23 22:33:52 2006 +0200 [MTD] Export nand_write_raw The previous _ecc removal / cleanup broke (i)nftl module usage. Export the missing symbol. Signed-off-by: Thomas Gleixner commit 85b85fee0cbb9d22b619a4981f046ca49adbc5cd Author: Thomas Gleixner Date: Tue May 23 22:03:39 2006 +0200 [MTD] Mark NAND drivers TOTO and PPChameleon broken Both drivers can not be fixed and compiled due to missing header files. Signed-off-by: Thomas Gleixner commit 9223a456da8ed357bf7e0b128c853e2c8bd54614 Author: Thomas Gleixner Date: Tue May 23 17:21:03 2006 +0200 [MTD] Remove read/write _ecc variants MTD clients are agnostic of FLASH which needs ECC suppport. Remove the functions and fixup the callers. Signed-off-by: Thomas Gleixner commit 2528e8cdf376d7da24647c442ec1e88c360d76ca Author: Thomas Gleixner Date: Tue May 23 16:10:00 2006 +0200 [MTD] Remove readv/readv_ecc These functions were never implemented and added only bloat to partition and concat code. Signed-off-by: Thomas Gleixner commit 9d8522df37f91621a70c5c0dbbf5bf2220b16798 Author: Thomas Gleixner Date: Tue May 23 16:06:03 2006 +0200 [MTD] Remove nand writev support NAND writev(_ecc) support is not longer necessary. Remove it. Signed-off-by: Thomas Gleixner commit 0cddd6c258b2ed3798d12619c28ed0d2b5a669bc Author: Thomas Gleixner Date: Tue May 23 15:59:58 2006 +0200 [MTD] ECC rework broke diskonchip Fix the diskonchip ecc setup. Signed-off-by: Thomas Gleixner commit 9a57d470fd4a77b9732fee97bed29c565c730af0 Author: Thomas Gleixner Date: Tue May 23 15:58:23 2006 +0200 [MTD] NAND ECC hwctl function has no return value Fix the broken prototype Signed-off-by: Thomas Gleixner commit 6dfc6d250d0b7ebaa6423c44dcd09fcfe68deabd Author: Thomas Gleixner Date: Tue May 23 12:00:46 2006 +0200 [MTD] NAND modularize ECC First step of modularizing ECC support. - Move ECC related functionality into a seperate embedded data structure - Get rid of the hardware dependend constants to simplify new ECC models Signed-off-by: Thomas Gleixner commit 7aa65bfd6793a56cc3bbce8436abbfea3a7bdd1f Author: Thomas Gleixner Date: Tue May 23 11:54:38 2006 +0200 [MTD] NAND cleanup nand_scan Seperate functionality out of nand_scan so the code is more readable. No functional change. First step of simplifying the nand driver. Signed-off-by: Thomas Gleixner commit 58dd8f2bfdcad1b219a4a92a2aadd8ea8c819f79 Author: Thomas Gleixner Date: Tue May 23 11:52:35 2006 +0200 [MTD] NAND consolidate data types The NAND driver used a mix of unsigned char, u_char amd uint8_t data types. Consolidate to uint8_t usage Signed-off-by: Thomas Gleixner commit 2c0a2bed9276ebbec5794edc07f66e21e9a1735c Author: Thomas Gleixner Date: Tue May 23 11:50:56 2006 +0200 [MTD] NAND whitespace and formatting cleanup Signed-off-by: Thomas Gleixner commit dcb0932884b801290efd80fbc37630297b98181f Author: Thomas Gleixner Date: Tue May 23 11:49:14 2006 +0200 [JFFS2] Simplify writebuffer handling The writev based write buffer implementation was far to complex as in most use cases the write buffer had to be handled anyway. Simplify the write buffer handling and use mtd->write instead. From extensive testing no performance impact has been noted. Signed-off-by: Thomas Gleixner commit ce4c61f184864991881ec789f7524f4b332eaafc Author: Thomas Gleixner Date: Tue May 23 11:43:28 2006 +0200 [MTD] Add support for NDFC NAND controller NDFC NAND Flash controller is embedded in PPC EP44x SoCs. Add platform driver based support. Signed-off-by: Thomas Gleixner commit 41796c2ea9b74cdf3bc2c368193d15b8ae8950ca Author: Thomas Gleixner Date: Tue May 23 11:38:59 2006 +0200 [MTD] Add platform support for NAND Add the data structures necessary to provide platform device support for NAND Signed-off-by: Thomas Gleixner commit a36ed2995c56d4f858ecb524a78837473e7115ae Author: Thomas Gleixner Date: Tue May 23 11:37:03 2006 +0200 [MTD] Simplify NAND locking Replace the chip lock by a the controller lock. For simple drivers a dummy controller structure is created by the scan code. This simplifies the locking algorithm in nand_get/release_chip(). Signed-off-by: Thomas Gleixner commit 819d6a32c397534c819d3c72a3947b7e7e4bec4b Author: Thomas Gleixner Date: Tue May 23 11:32:45 2006 +0200 [MTD] Improve software ECC calculation Unrolling the loops produces denser and much faster code. Add a config switch which allows to select the byte order of the resulting ecc code. The current Linux implementation has a byte swap versus the SmartMedia specification Signed-off-by: Thomas Gleixner commit 9fe4854cd1f60273f9a3ece053f4789605f58a5e Author: David Woodhouse Date: Tue May 23 00:38:06 2006 +0100 [JFFS2] Remove flash offset argument from various functions. We don't need the upper layers to deal with the physical offset. It's _always_ c->nextblock->offset + c->sector_size - c->nextblock->free_size so we might as well just let the actual write functions deal with that. Signed-off-by: David Woodhouse commit 5fa433942ba4e399f7e28764c9db4ade89e91d40 Author: Joern Engel Date: Mon May 22 23:18:29 2006 +0200 [MTD] Introduce MTD_BIT_WRITEABLE o Add a flag MTD_BIT_WRITEABLE for devices that allow single bits to be cleared. o Replace MTD_PROGRAM_REGIONS with a cleared MTD_BIT_WRITEABLE flag for STMicro and Intel Sibley flashes with internal ECC. Those flashes disallow clearing of single bits, unlike regular NOR flashes, so the new flag models their behaviour better. o Remove MTD_ECC. After the STMicro/Sibley merge, this flag is only set and never checked. Signed-off-by: Joern Engel commit c8b229de2b05c2b3e8d282ce260935a88ac030ca Author: Joern Engel Date: Mon May 22 23:18:12 2006 +0200 [MTD] Merge STMicro NOR_ECC code with Intel Sibley code In 2002, STMicro started producing NOR flashes with internal ECC protection for small blocks (8 or 16 bytes). Support for those flashes was added by me. In 2005, Intel Sibley flashes copied this strategy and Nico added support for those. Merge the code for both. Signed-off-by: Joern Engel commit 28318776a80bc3261f9af91ef79e6e38bb9f5bec Author: Joern Engel Date: Mon May 22 23:18:05 2006 +0200 [MTD] Introduce writesize At least two flashes exists that have the concept of a minimum write unit, similar to NAND pages, but no other NAND characteristics. Therefore, rename the minimum write unit to "writesize" for all flashes, including NAND. Signed-off-by: Joern Engel commit 8ca9ed5db3aea8d27989c239e8a2f79b839f1e99 Author: Joern Engel Date: Mon May 22 23:17:23 2006 +0200 [MTD] Use single flag to mark writeable devices. Two flags exist to decide whether a device is writeable or not. None of those two flags is checked for independently, so they are clearly redundant, if not an invitation to bugs. This patch removed both of them, replacing them with a single new flag. Signed-off-by: Joern Engel commit 987d47b71a85bd83dc40c870abee3b64f2002163 Author: David Woodhouse Date: Mon May 22 16:32:05 2006 +0100 [JFFS2] Put list of nodes in common part of ic/x_ref/x_datum structure We'll be using a proper list of nodes in the jffs2_xattr_datum and jffs2_xattr_ref structures, because the existing code to overwrite them is just broken. Put it in the common part at the front of the structure which is shared with the jffs2_inode_cache, so that the jffs2_link_node_ref() function can do the right thing. Signed-off-by: David Woodhouse commit 0eac940b8a087576c66ecf8e0f294f2ceb3b607b Author: David Woodhouse Date: Mon May 22 16:29:23 2006 +0100 [JFFS2] Add some preemptive BUG checks for XATTR code In a couple of places, we assume that what's at the end of the ->next_in_ino list is a struct jffs2_inode_cache. Let's check for that, since we expect it to change soon. Signed-off-by: David Woodhouse commit fcb7578719529898aef9edce8e409e457a1c2d15 Author: David Woodhouse Date: Mon May 22 15:23:10 2006 +0100 [JFFS2] Extend jffs2_link_node_ref() to link into per-inode list too. Let's avoid the potential for forgetting to set ref->next_in_ino, by doing it within jffs2_link_node_ref() instead. This highlights the ugliness of what we're currently doing with xattr_datum and xattr_ref structures -- we should find a nicer way of dealing with that. Signed-off-by: David Woodhouse commit a1b563d652b54647ffacb2d6edf7859d3e97a723 Author: David Woodhouse Date: Mon May 22 13:55:46 2006 +0100 [JFFS2] Initialise ref->next_in_ino when marking dirty space in wbuf flush Signed-off-by: David Woodhouse commit 3b79673cfae93d0ed63eceb058bb26aba602a278 Author: David Woodhouse Date: Mon May 22 12:15:47 2006 +0100 [JFFS2] Fix accounting error in jffs2_link_node_ref() When filing REF_OBSOLETE nodes, we'd add their size to the global 'dirty_size' count, but then to the eraseblock's 'used_size' count. That's not clever. Signed-off-by: David Woodhouse commit 06c6764b5830798c39617b24497cade90451592f Author: David Woodhouse Date: Mon May 22 11:27:14 2006 +0100 [JFFS2] Fix dummy jffs2_sum_scan_sumnode() macro for !SUMMARY case. I added an argument to the real function... Signed-off-by: David Woodhouse commit 615191bb1dfc6980e7c7a85225444d860d74b343 Author: David Woodhouse Date: Sun May 21 19:03:21 2006 +0100 [MTD] Account for MODULE_SYMBOL_PREFIX when requesting NOR chip driver Signed-off-by: David Woodhouse commit ecde26313076e5055dcd54d6537632275346203f Author: David Woodhouse Date: Sun May 21 18:38:51 2006 +0100 [MTD] Use symbol_request() in old DiskOnChip probe code to find actual driver The previous code wouldn't work correctly on architectures which have a non-empty MODULE_SYMBOL_PREFIX, and this version is neater if slightly less optimal in the built-in case. Signed-off-by: David Woodhouse commit 3d12c0c75db0cd85beb11c4e2d86a49cabe3cfff Author: Jonathan McDowell Date: Sun May 21 18:11:55 2006 +0100 [MTD] Add Amstrad Delta NAND support The patch below adds support for the NAND device on the Amstrad Delta. This is a 32MiB 8bit Toshiba device, with the data bus connected to the OMAP MPUIO pins and ALE, CLE, NCE, NRE, NWE and NWP all connected to the Delta's latch2 16bit latch. Signed-Off-By: Jonathan McDowell Signed-off-by: David Woodhouse commit ca89a517fa577e6f26621463d3aa4f3c3d530b1e Author: David Woodhouse Date: Sun May 21 13:29:11 2006 +0100 [JFFS2] Finally eliminate __totlen field from struct jffs2_raw_node_ref Well, almost. We'll actually keep a 'TEST_TOTLEN' macro set for now, and keep doing some paranoia checks to make sure it's all working correctly. But if TEST_TOTLEN is unset, the size of struct jffs2_raw_node_ref drops from 16 bytes to 12 on 32-bit machines. That's a saving of about half a megabyte of memory on the OLPC prototype board, with 125K or so nodes in its 512MiB of flash. Signed-off-by: David Woodhouse commit 010b06d6d07d9fa5ea6070aa72bb3e0de1761ab7 Author: David Woodhouse Date: Sun May 21 13:15:59 2006 +0100 [JFFS2] Locking issues in summary write code. We can't use jffs2_scan_dirty_space() because it doesn't do any locking; it's only for use at scan time -- hence the 'scan' in the name. Also, don't allocate refs while we have c->erase_completion_lock held. Signed-off-by: David Woodhouse commit 9167e0f811cbe28564c44a99c2f07b0ce5b368cf Author: David Woodhouse Date: Sun May 21 13:13:45 2006 +0100 [JFFS2] Remove stray kfree of summary info in XATTR code. We don't allocate this locally any more -- it's given to us and owner by our caller. Also improve the debug messages a little. Signed-off-by: David Woodhouse commit 0bcc099d6d1a7b9fa2adf7c19812e4e816915e10 Author: David Woodhouse Date: Sun May 21 13:00:54 2006 +0100 [JFFS2] File node reference for wasted space when flushing wbuf Next step in ongoing campaign to file a struct jffs2_raw_node_ref for every piece of dirty space in the system, so that __totlen can be killed off.... Signed-off-by: David Woodhouse commit b64335f2b740d6f5dbf5d3b04af30d407bf599f5 Author: David Woodhouse Date: Sun May 21 04:36:45 2006 +0100 [JFFS2] Add length argument to jffs2_add_physical_node_ref() If __totlen is going away, we need to pass the length in separately. Also stop callers from needlessly setting ref->next_phys to NULL, since that's done for them... and since that'll also be going away soon. Signed-off-by: David Woodhouse commit 49f11d40751b974f3b829f208eefa6f97a10cac8 Author: David Woodhouse Date: Sun May 21 04:00:01 2006 +0100 [JFFS2] Mark gaps in summary list as dirty space Make sure we allocate a ref for any dirty space which exists between nodes which we find in an eraseblock summary. Signed-off-by: David Woodhouse commit 25090a6b23906552cf3d204aa421f811327e1b15 Author: David Woodhouse Date: Sun May 21 03:57:56 2006 +0100 [JFFS2] Discard remaining free space when filing a dirty block in scan. The incoming ref_totlen() calculation is going to rely on the existence of nodes which cover all dirty space. We can't just tweak the accounting data any more; we have to call jffs2_scan_dirty_space() to do it. Signed-off-by: David Woodhouse commit 68270995f29f1a82b3eaab01df63ea7e721e2fa6 Author: David Woodhouse Date: Sun May 21 03:46:05 2006 +0100 [JFFS2] Introduce jffs2_scan_dirty_space() function. To eliminate the __totlen field from struct jffs2_raw_node_ref, we need to allocate nodes for dirty space instead of just tweaking the accounting data. Introduce jffs2_scan_dirty_space() in preparation for that. Signed-off-by: David Woodhouse commit 7807ef7ba2a41c05f6197381f572dd38baa6c1ce Author: David Woodhouse Date: Sun May 21 03:45:27 2006 +0100 [JFFS2] Fix summary handling of unknown but compatible nodes. For RWCOMPAT and ROCOMPAT nodes, we should still allow the mount to succeed. Just abandon the summary and fall through to the full scan. Signed-off-by: David Woodhouse commit 3560160aa26ebced1944aaa2e7e436d2a1b1bf70 Author: David Woodhouse Date: Sun May 21 01:28:05 2006 +0100 [JFFS2] Fix memory leak in scan code; improve comments. If we had to allocate extra space for the summary node, we weren't correctly freeing it when jffs2_sum_scan_sumnode() returned nonzero -- which is both the success and the failure case. Only when it returned zero, which means fall through to the full scan, were we correctly freeing the buffer. Document the meaning of those return codes while we're at it. Signed-off-by: David Woodhouse commit 6171586a7ae5198988774e8480631e8d15f65dfe Author: David Woodhouse Date: Sun May 21 00:02:06 2006 +0100 [JFFS2] Correct handling of JFFS2_FEATURE_RWCOMPAT_COPY nodes. We should preserve these when we come to garbage collect them, not let them get erased. Use jffs2_garbage_collect_pristine() for this, and make sure the summary code copes -- just refrain from writing a summary for any block which contains a node we don't understand. Signed-off-by: David Woodhouse commit fb9fbbcc9389edabb172ac1b6419c01e32046787 Author: David Woodhouse Date: Sat May 20 20:08:42 2006 +0100 [JFFS2] Correct accounting of erroneous cleanmarkers and failed summaries. It should all be counted as dirty space, not wasted and _definitely_ not unchecked. Signed-off-by: David Woodhouse commit f1f9671bd8f7d2ac6a918bad806ab5bdc0daaf4e Author: David Woodhouse Date: Sat May 20 19:45:26 2006 +0100 [JFFS2] Introduce jffs2_link_node_ref() function to reduce code duplication The same sequence of code was repeated in many places, to add a new struct jffs2_raw_node_ref to an eraseblock and adjust the space accounting accordingly. Move it out-of-line. Signed-off-by: David Woodhouse commit 1417fc44ee923418df3adadeb4846c891bba1ba5 Author: David Woodhouse Date: Sat May 20 16:20:19 2006 +0100 [JFFS2] Reduce calls to ref_totlen() in jffs2_mark_node_obsolete() We were calling ref_totlen() 18 times. Even before that becomes a real function rather than just a dereference, apparently some compilers still suck anyway. It'll _certainly_ suck after ref_totlen() becomes more complicated, so calculate it once and don't rely on CSE. Signed-off-by: David Woodhouse commit 9641b784ff82cf0a48a6c70ef9867f5fd728de67 Author: David Woodhouse Date: Sat May 20 16:13:34 2006 +0100 [JFFS2] Optimise reading of eraseblock summary nodes This improves the time to mount 512MiB of NAND flash on my OLPC prototype by about 4%. We used to read the last page of the eraseblock twice -- once to find the offset of the summary node, and again to actually _read_ the summary node. Now we read the last page only once, and read more only if we need to. We also don't allocate a new buffer just for the summary code -- we use the buffer which was already allocated for the scan. Better still, if the 'buffer' for the scan is actually just a pointer directly into NOR flash, we use that too, avoiding the memcpy() which we used to do. Signed-off-by: David Woodhouse commit 6c8b44abc86a3e23dd1a22c0ee187f06bd7c7f5d Author: Andrew Morton Date: Sat May 20 10:17:21 2006 +0100 [MTD] Avoid 64-bit division in mtdconcat WARNING: "__moddi3" [drivers/mtd/mtdconcat.ko] undefined! Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse commit 5fc3dbc418e01345e25e96b3192a1c46051c3fdc Author: David Woodhouse Date: Sat May 20 02:41:34 2006 +0100 [MTD] Use __symbol_get() instead of symbol_get() in NOR chip probe Signed-off-by: David Woodhouse commit dcb6592d72923123e3e479134f9381e0133d7d9d Author: Andrew Morton Date: Fri May 19 18:06:34 2006 -0700 git-mtd: symbol_get() fix drivers/mtd/devices/docprobe.c: In function `DoC_Probe': drivers/mtd/devices/docprobe.c:338: warning: assignment from incompatible pointer type drivers/mtd/devices/docprobe.c:341: warning: assignment from incompatible pointer type Cc: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse commit 8e4482fba21d15da99f39a13396d3361e810d199 Author: Ferenc Havasi Date: Fri May 19 21:00:36 2006 +0100 [JFFS2] Remove forgotten summary code Remove forgotten lines from jffs2_scan_eraseblock() which were unnecessary and may cause problem in some environments. Thanks to Alexander Belyakov . Signed-off-by: Ferenc Havasi Signed-off-by: David Woodhouse commit aef9ab47841af45888d950baa6448072cc70bdd5 Author: David Woodhouse Date: Fri May 19 00:28:49 2006 +0100 [JFFS2] Support new device nodes Device node major/minor numbers are just stored in the payload of a single data node. Just extend that to 4 bytes and use new_encode_dev() for it. We only use the 4-byte format if we _need_ to, if !old_valid_dev(foo). This preserves backwards compatibility with older code as much as possible. If we do make devices with major or minor numbers above 255, and then mount the file system with the old code, it'll just read the first two bytes and get the numbers wrong. If it comes to garbage-collect it, it'll then write back those wrong numbers. But that's about the best we can expect. Signed-off-by: David Woodhouse commit f6a673b3f4f93c1c50e1b18f29254b0531b722a8 Author: David Woodhouse Date: Wed May 17 22:03:10 2006 +0100 [MTD] Fix printk format error in gen_probe.c Signed-off-by: David Woodhouse commit fd0e5187458041c82fea616575104698397d68d3 Author: David Woodhouse Date: Wed May 17 21:53:58 2006 +0100 [MTD] Fix mtdconcat build. We didn't introduce mtd->writesize yet. Signed-off-by: David Woodhouse commit e8d32937d9f2022c31871ef357a4883f78da1b7f Author: Alexander Belyakov Date: Wed May 17 19:11:16 2006 +0400 MTD: mtdconcat NAND/Sibley support (rev.2) There is a second revision of "mtdconcat NAND/Sibley" patch. I hope the patch will not get damaged as I'm posting it from gmail account, thanks to Jorn. The patch adds previously missing concat_writev(), concat_writev_ecc(), concat_block_isbad(), concat_block_markbad() functions to make concatenation layer compatible with Sibley and NAND chips. Patch has been cleared from whitespaces, fixed some lines of code as requested. Also I have added code for alignment check that should support Jorn's "writesize" patch. Signed-off-by: Alexander Belyakov Signed-off-by: David Woodhouse commit ceb31db11f78935c666c50fe9c99d4560d592fde Author: Martin Michlmayr Date: Mon Mar 20 04:40:46 2006 +0000 LASAT depends on MTD_CFI The following difference was found between the mainline and linux-mips kernel. LASAT depends on MTD_CFI. Signed-off-by: Martin Michlmayr Signed-off-by: David Woodhouse commit be21ce119716f821c595552917ce7c05a3997b6b Author: Martin Michlmayr Date: Mon Mar 20 04:40:26 2006 +0000 Re-add module description for ms02-nv to Kconfig In an unrelated MTD commit, a description about the ms02-nv module got removed from Kconfig. While I personally agree with this removal, the module maintainer (Maciej W. Rozycki) would like to see it added back. In the absense of any consistency regarding Kconfig descriptions his wish should be followed. Signed-off-by: Martin Michlmayr Acked-by: Maciej W. Rozycki Signed-off-by: David Woodhouse commit 683b30c8e78ab363dc8d8c94bdb61b64d1f6f5e2 Author: Sean Young Date: Wed May 17 12:45:34 2006 +0100 [MTD] RFD FTL: Be noisier, and don't assume block without RFD magic are erased Signed-off-by: Sean Young Signed-off-by: David Woodhouse commit ae282d497d5631ce31539717131c760e3872c539 Author: Vitaly Wool Date: Wed May 17 12:34:27 2006 +0100 [MTD] generic: propagate oobavail to MTD partitions 'oobavail' parameter of mtd_info structure is now propagated to the MTD partitions Signed-off-by: Vitaly Wool Signed-off-by: David Woodhouse commit 599fb3298b70d75c12dbdc4dd30f52c5cf04ea2f Author: Sean Young Date: Wed May 17 11:47:48 2006 +0100 [PCMCIA MTD] Fix leak and crash on reboot Signed-off-by: Sean Young Signed-off-by: David Woodhouse commit c172471b78255a5cf6d05383d9ebbf0c6683167a Author: Nicolas Pitre Date: Thu Mar 30 15:52:41 2006 +0100 cfi_cmdset_0001: factorize code to wait for flash status This allows for much better abstraction and separation of the XIP and non-XIP cases with their own specific implementations. This fixes the case where a timeout was tripped on in the XIP case by the code that was meant for the non-XIP case only. This also makes for a nice code reduction. Signed-off-by: Nicolas Pitre CC: "Alexey, Korolev" Signed-off-by: David Woodhouse commit 6e7a6809c555aeb7cb98544df4d446fbd6f123ec Author: Nicolas Pitre Date: Wed Mar 29 23:31:42 2006 +0100 cfi-cmdset-0001: always update the chip status ... otherwise xip_enable() won't do the right thing. Signed-off-by: Nicolas Pitre Signed-off-by: David Woodhouse commit df54b52c411befdcf1d0989f939a49163570ad29 Author: Josh Boyer Date: Tue Dec 6 17:28:19 2005 +0000 CHIPS: Fix potential starvation in cfi_cmdset_0001 The patch below fixes a potential starvation issue that can arise when there is contention on a chip during a period when a process is currently writing to it. The starvation is avoided by conditionally rescheduling when the chip is left in a state usable by other processes. Signed-off-by: Josh Boyer Signed-off-by: Tom Gall Signed-off-by: David Woodhouse commit ba9627b85fcb5ed67285ca0711f0f4d1e965746e Author: David Woodhouse Date: Tue May 16 23:03:08 2006 +0100 [JFFS2] Repack some on-medium structures. ARM is weirder than I thought. We have to pack at least the jint16_t structure, because otherwise it'll be four bytes in size. Thankfully, we can do that and _not_ pack the actual node structures, and the compiler still doesn't emit stupid code. Signed-off-by: David Woodhouse commit 35af68b53a62c98bf551aaae7be179bde248eb34 Author: Sergei Shtylyov Date: Tue May 16 20:52:06 2006 +0400 NAND: Fix NAND ECC errors on AMD Au1550 On AMD Au1550 the static bus controller fails to keep -CE asserted during chip ready delay on read commands and the NAND chip being used requires this. So, the current driver allows nand_base.c to drive -CE manually during the entire sector read. When the PCMCIA driver is enabled however, occasionally the ECC errors occur on NAND reads. This happens because the PCMCIA driver polls sockets periodically and reads one of the board's control/status regs (BCSRs) which are on the same static bus as the NAND flash, and just use another chip select (and the NOR flash also resides on that bus), so as the NAND driver forces NAND chip select asserted and the -RE signal is shared, a contention occurs on the static bus when BCSR or NOR flash is read while we're reading from NAND. So, we either can't keep interrupts enabled during the whole NAND sector read (which is hardly acceptable), or have to implement some interlocking scheme between multiple drivers (which is painful, and makes me shudder :-). There's a third way which has proven to work: to force -CE asserted only while we're waiting for a NAND chip to become ready after a read command, disabling interrupts for a maximum of 25 microseconds (according to Toshiba TC58DVM92A1FT00 datasheet -- this chip is mentioned in the board schematics); for Samsung NAND chip which seems to be actually used this delay is even less, 12 us. Signed-off-by: Konstantin Baydarov Signed-off-by: Sergei Shtylyov Signed-off-by: David Woodhouse commit b020bb7d3b3a8e3568a16eaf98c033bb9ee474eb Author: Ben Dooks Date: Tue May 16 17:31:15 2006 +0100 [MTD] Fix build warnings in RedBoot MTD partition parser. Fix build warnings from drivers/mtd/redboot.c due to use of `unsigned long` in `struct fis_image_desc` for fields being passed to swab32s() which expects __u32 * Change the entries to uint32_t to make them compatible with the swab32s() function Signed-off-by: Ben Dooks Signed-off-by: David Woodhouse commit 155285c4775b7027b01a5b744c721ae43cced798 Author: Sergei Shtylyov Date: Tue May 16 20:16:41 2006 +0400 NAND: AMD Au1550 driver reads write-only register During the last cleanup of the AMD Au1550 NAND driver the old buglet was reintroduced: as the MEM_STNDCTL register is write-only and seem to always read as 0x31, read-modify-write to it done in au1xxx_nand_init() will have the side effect of enabling -RCS0/1 pin override (via bits 4/5 of this reg.), thus possibly causing a contention on the static bus when the NOR flash (using -RCS0) or board control status registers (using -RCS2) are read. Luckily, this goes away with a first NAND access, since au1550_hwcontrol() doesn't try to read this register before writing anymore. Signed-off-by: Sergei Shtylyov Signed-off-by: David Woodhouse commit c41ff6e5f38b02ff927d0d510e28dc1392bb4690 Author: David Woodhouse Date: Tue May 16 17:05:33 2006 +0100 [JFFS2] Fix printk format in jffs2_sum_write_data() error message. fs/jffs2/summary.c: In function ‘jffs2_sum_write_data’: fs/jffs2/summary.c:658: warning: format ‘%zd’ expects type ‘signed size_t’, but argument 4 has type ‘uint32_t’ Signed-off-by: David Woodhouse commit 7d2beb135986477f53da77303356bd04329f8d0e Author: David Brownell Date: Tue May 16 16:08:10 2006 +0100 [JFFS2] Fix section mismatch warnings in JFFS2. Mark certain functions with __init and __exit appropriately. Signed-off-by: David Brownell Signed-off-by: David Woodhouse commit cead4dbc03ba6eb2e35bac04439b76a0cc2286ce Author: David Woodhouse Date: Tue May 16 13:54:50 2006 +0100 [MTD NAND] Make various initfuncs static, remove #ifdef MODULE from exitfuncs We all inherited the same error from the original NAND board driver which got copied and changed. Fix them all at once... Signed-off-by: David Woodhouse commit ce589a0328866228412ea0df2c834688da8f4700 Author: Adrian Bunk Date: Tue May 16 13:46:44 2006 +0200 drivers/mtd/devices/docprobe.c: correct #if's On Mon, May 15, 2006 at 12:56:37AM -0700, Andrew Morton wrote: >... > Changes since 2.6.17-rc3-mm1: >... > git-mtd.patch >... > git trees >... If we correct the names of the config options, the code might actually work as intended... Signed-off-by: Adrian Bunk Signed-off-by: David Woodhouse commit f41a5f804a5862e9b87cf2d4cca1d6a7db7a9e82 Author: David Woodhouse Date: Tue May 16 13:11:47 2006 +0100 [MTD] Add help text for MTD_NAND_CS553X option. Signed-off-by: David Woodhouse commit 5b5ffbc1e6d62d89747f3f59c09b2e488a7d7fce Author: Florin Malita Date: Mon May 15 23:42:31 2006 +0100 [PATCH] jffs2: memory leak in jffs2_scan_medium() If jffs2_scan_eraseblock() fails and the exit path is taken, 's' is not being deallocated. Reported by Coverity, CID: 1258. Signed-off-by: Florin Malita Signed-off-by: David Woodhouse commit 184f565210c6c8a852c53ffc070f9add61e0f331 Author: Andrew Morton Date: Mon May 15 13:45:58 2006 +0100 [JFFS2] Fix printk format in some error messages. fs/jffs2/nodelist.c: In function `check_node_data': fs/jffs2/nodelist.c:441: warning: unsigned int format, different type arg (arg 4) fs/jffs2/nodelist.c:464: warning: int format, different type arg (arg 5) Modified from Andrew's original fix because while his terminal may indeed only have eighty columns, mine only has _TWENTYFOUR_ lines. So the cosmetic fluff is perfectly OK out past column 80 where it was -- the casual reader doesn't _care_ about anything more than the fact that it goes 'if (foo) JFFS2_WARNING...', and there's no point wasting a whole line to display the tail end of the printk which nobody actually cares about. Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse commit 3e68fbb59b3d4e6b47b65e9928b5929e02179759 Author: David Woodhouse Date: Mon May 15 00:49:43 2006 +0100 [JFFS2] Don't pack on-medium structures, because GCC emits crappy code If we use __attribute__((packed)), GCC will _also_ assume that the structures aren't sensibly aligned, and it'll emit code to cope with that instead of straight word load/save. This can be _very_ suboptimal on architectures like ARM. Ideally, we want an attribute which just tells GCC not to do any padding, without the alignment side-effects. In the absense of that, we'll just drop the 'packed' attribute and hope that everything stays as it was (which to be fair is fairly much what we expect). And add some paranoia checks in the initialisation code, which should be optimised away completely in the normal case. Signed-off-by: David Woodhouse commit 52239da1b06ff445bf71d35e04d8ce74e4c6fe7b Author: David Woodhouse Date: Sun May 14 16:54:39 2006 +0100 [MTD NAND] Modify check for modules registering NAND devices without ->owner Make it work even with compilers which lack the wit to notice that THIS_MODULE is always non-NULL. Use #ifdef MODULE instead. It's only a temporary debugging check anyway. Signed-off-by: David Woodhouse commit 0d4e30d26a279f1b6a008a233a6835ad2af571e4 Author: David Woodhouse Date: Sun May 14 12:25:19 2006 +0100 [MTD] Clean up to fix modular build ... and also fix the multiple inclusion guard so it actually _works_ Signed-off-by: David Woodhouse commit 2f206701ae9b5c13719c2be26121b9461f05f87c Author: David Woodhouse Date: Sun May 14 11:59:20 2006 +0100 [MTD] Remove gratuitous inclusion of ARM-only header from physmap.c The physmap platform driver conversion added to physmap.c an include of asm/mach/flash.h which is 1) ARM-specific; and 2) isn't actually necessary. Remove it. Signed-off-by: Lennert Buytenhek Signed-off-by: David Woodhouse commit cf5eba53346fbfdf1b80e05ca3fd7fe2ec841077 Author: David Woodhouse Date: Sun May 14 04:06:24 2006 +0100 [JFFS2] Reduce excessive node count for syslog files. We currently get fairly poor behaviour with files which get many short writes, such as system logs. This is because we end up with many tiny data nodes, and the rbtree gets massive. None of these nodes are actually obsolete, so they are counted as 'clean' space. Eraseblocks can be entirely full of these nodes (which are REF_NORMAL instead of REF_PRISTINE), and still they count entirely towards 'used_size' and the eraseblocks can sit on the clean_list for a long time without being picked for GC. One way to alleviate this in the long term is to account REF_NORMAL space separately from REF_PRISTINE space, rather than counting them both towards used_size. Then these eraseblocks can be picked for GC and the offending nodes will be garbage collected. The short-term fix, though -- which probably makes sense even if we do eventually implement the above -- is to merge these nodes as they're written. When we write the last byte in a page, write the _whole_ page. This obsoletes the earlier nodes in the page _immediately_ and we don't even need to wait for the garbage collection to do it. Original implementation from Ferenc Havasi Signed-off-by: David Woodhouse commit 151e76590f66f5406eb2e1f4270c5323f385d2e8 Author: David Woodhouse Date: Sun May 14 01:51:54 2006 +0100 [MTD] Fix legacy character sets throughout drivers/mtd, include/linux/mtd Signed-off-by: David Woodhouse commit 0f5ae3d2e9f49af55eb2a9b7cb54b4c0c2373017 Author: David Woodhouse Date: Sun May 14 01:40:50 2006 +0100 [MTD] Deal correctly with NOR chips which are smaller than the map window We used to calculate the number of chips to be zero, allocate an array of that size, then nasty things would happen when we attempt to access the first object in that zero-sized array. Now, if the number of _full_ chips that would fit into the map is zero, we allocate an array of one anyway, and then artificially reduce the total size of the resulting MTD device to fit in the map. Signed-off-by: David Woodhouse commit a6550e57f9d074511cf420bdb802ab5e56edc3bb Author: Jesper Juhl Date: Sun May 14 01:42:25 2006 +0200 mtd: fix memory leak in block2mtd_setup() There's a mem leak in drivers/mtd/devices/block2mtd.c::block2mtd_setup() We can leak 'name' allocated with kmalloc in 'parse_name' if leave via the 'parse_err' macro since it contains a return but doesn't do any freeing. Spotted by coverity checker as bug 615. Signed-off-by: Jesper Juhl Signed-off-by: David Woodhouse commit 552d9205186428a1e2a49ed577bcbba9f777af37 Author: David Woodhouse Date: Sun May 14 01:20:46 2006 +0100 [MTD] Fix module refcounting in NAND board drivers. The _board_ driver needs to be mtd->owner, and it in turn pins the nand.ko module. Fix them all to actually do that, and fix nand.ko not to overwrite it -- and also to check that the caller sets it, if the caller is a module. Signed-off-by: David Woodhouse commit 4f678a58d335291ce9213c049bbe16e6d24487ed Author: Jesper Juhl Date: Sun May 14 01:07:18 2006 +0200 mtd: fix memory leaks in phram_setup There are two code paths in drivers/mtd/devices/phram.c::phram_setup() that will leak memory. Memory is allocated to the variable 'name' with kmalloc() by the parse_name() function, but if we leave by way of the parse_err() macro, then that memory is never kfree()'d, nor is it ever used with register_device() so it won't be freed later either - leak. Found by the Coverity checker as #593 - simple fix below. Signed-off-by: Jesper Juhl Signed-off-by: David Woodhouse commit e0c7d7675331140e5186d2d1a0efce1d3877d379 Author: David Woodhouse Date: Sat May 13 18:07:53 2006 +0100 [MTD NAND] Indent all of drivers/mtd/nand/*.c. It was just too painful to deal with. Signed-off-by: David Woodhouse commit 6943f8af7d6583be57d67bba8b2644371f6a10ca Author: David Woodhouse Date: Sat May 13 16:14:26 2006 +0100 [MTD NAND] Reduce paranoia level when scanning for bad blocks on virgin chips We were scanning for 0xFF through the entire chip -- which takes a while when it's a 512MiB device as I have on my current toy. The specs only say we need to check certain bytes -- so do only that. Signed-off-by: David Woodhouse commit 21b9879bf2817aca343cdda11ade6a87f5373e74 Author: KaiGai Kohei Date: Sat May 13 15:22:29 2006 +0900 [JFFS2][XATTR] Fix obvious typo [2/2] jffs2-xattr-v5.2-02-fix_obvious_typo.patch Signed-off-by: KaiGai Kohei commit c8708a9275928cc8e77bd443cd12565dda0a3ded Author: KaiGai Kohei Date: Sat May 13 15:21:38 2006 +0900 [JFFS2][XATTR] Handling the duplicate JFFS2_NODETYPE_XATTR node cases. When jffs2_sum_process_sum_data() found a JFFS2_NODETYPE_XATTR which has duplicate xid and older version, an error was returned without appropriate process. In the result, mounting filesystem is failed. This patch fix this problem. If jffs2_setup_xattr_datum() returned -EEXIST, the caller marks this node as DIRTY_SPACE(). [1/2] jffs2-xattr-v5.2-01-fix-duplicate-xdatum.patch Signed-off-by: KaiGai Kohei commit dea80134dc4d54df52c0c59b0ba2bb5aa999bf30 Author: KaiGai Kohei Date: Sat May 13 15:20:24 2006 +0900 [JFFS2][XATTR] remove redundant pointer cast in acl.c remove redundant pointer cast in acl.c. [10/10] jffs2-xattr-v5.1-10-remove_pointer_cast.patch Signed-off-by: KaiGai Kohei commit 5a14959c0700cd389d9e7ba312e15c8e85255e1f Author: KaiGai Kohei Date: Sat May 13 15:19:36 2006 +0900 [JFFS2][XATTR] remove '__KERNEL__' from acl.h [9/10] jffs2-xattr-v5.1-09-remove__KERNEL__.patch Signed-off-by: KaiGai Kohei commit ee886b5df17f9791a72cf0afe7f6c0c079231ef8 Author: KaiGai Kohei Date: Sat May 13 15:19:03 2006 +0900 [JFFS2][XATTR] remove senseless comment remove senseless comment. [8/10] jffs2-xattr-v5.1-08-remove_senseless_comment.patch Signed-off-by: KaiGai Kohei commit 652ecc20d1f5b4fd745c185c940e5b3afb2a0711 Author: KaiGai Kohei Date: Sat May 13 15:18:27 2006 +0900 [JFFS2][XATTR] Unify each file header part with any jffs2 file. Unify each file header part with any jffs2 file. [7/10] jffs2-xattr-v5.1-07-unify_file_header.patch Signed-off-by: KaiGai Kohei commit 4470d0409bfe093abbf965dcc97e5c1450c80afb Author: KaiGai Kohei Date: Sat May 13 15:17:11 2006 +0900 [JFFS2][XATTR] '#include ' was added into xattr.h. '#include ' was added into xattr.h. because 'struct list_head' is used in this header file. [6/10] jffs2-xattr-v5.1-06-add_list.h.patch Signed-off-by: KaiGai Kohei commit 084702e00111eb9ffb6d8a5c1938b8e5423e40a8 Author: KaiGai Kohei Date: Sat May 13 15:16:13 2006 +0900 [JFFS2][XATTR] Remove jffs2_garbage_collect_xattr(c, ic) Remove jffs2_garbage_collect_xattr(c, ic). jffs2_garbage_collect_xattr_datum/ref() are called from gc.c directly. In original implementation, jffs2_garbage_collect_xattr(c, ic) returns with holding a spinlock if 'ic' is inode_cache. But it returns after releasing a spinlock if 'ic' is xattr_datum/ref. It looks so confusable behavior. Thus, this patch makes caller manage locking/unlocking. [5/10] jffs2-xattr-v5.1-05-update_xattr_gc.patch Signed-off-by: KaiGai Kohei commit 8f2b6f49c656dd4597904f8c20661d6b73cdbbeb Author: KaiGai Kohei Date: Sat May 13 15:15:07 2006 +0900 [JFFS2][XATTR] Remove 'struct list_head ilist' from jffs2_inode_cache. This patch can reduce 4-byte of memory usage per inode_cache. [4/10] jffs2-xattr-v5.1-04-remove_ilist_from_ic.patch Signed-off-by: KaiGai Kohei commit 8b0b339d46ca0105a9936e3caa3bac80b72de7a3 Author: KaiGai Kohei Date: Sat May 13 15:14:14 2006 +0900 [JFFS2][XATTR] Add a description about c->xattr_sem Add a description about the c->xattr_sem read/write semaphore into README.Locking. [3/10] jffs2-xattr-v5.1-03-append_README.Locking.patch Signed-off-by: KaiGai Kohei commit de1f72fab35d2b6215017690c6dc27b8f4aa14bc Author: KaiGai Kohei Date: Sat May 13 15:13:27 2006 +0900 [JFFS2][XATTR] remove typedef from posix_acl related definition. jffs2_acl_header, jffs2_acl_entry and jffs2_acl_entry_short were redefined with using 'struct' instead of 'typedef' in kernel implementation. [1/10] jffs2-xattr-v5.1-01-remove_typedef_kernel.patch Signed-off-by: KaiGai Kohei commit aa98d7cf59b5b0764d3502662053489585faf2fe Author: KaiGai Kohei Date: Sat May 13 15:09:47 2006 +0900 [JFFS2][XATTR] XATTR support on JFFS2 (version. 5) This attached patches provide xattr support including POSIX-ACL and SELinux support on JFFS2 (version.5). There are some significant differences from previous version posted at last December. The biggest change is addition of EBS(Erase Block Summary) support. Currently, both kernel and usermode utility (sumtool) can recognize xattr nodes which have JFFS2_NODETYPE_XATTR/_XREF nodetype. In addition, some bugs are fixed. - A potential race condition was fixed. - Unexpected fail when updating a xattr by same name/value pair was fixed. - A bug when removing xattr name/value pair was fixed. The fundamental structures (such as using two new nodetypes and exclusion mechanism by rwsem) are unchanged. But most of implementation were reviewed and updated if necessary. Espacially, we had to change several internal implementations related to load_xattr_datum() to avoid a potential race condition. [1/2] xattr_on_jffs2.kernel.version-5.patch [2/2] xattr_on_jffs2.utils.version-5.patch Signed-off-by: KaiGai Kohei Signed-off-by: David Woodhouse commit 9d75414b4fa7390975ef0e2b56ff40425657fe52 Author: David Woodhouse Date: Sat May 13 04:12:40 2006 +0100 [MTD NAND] Update CS553x NAND driver: Hardware ECC support, optimisations. - Implement HW ECC support, - Provide read_buf() and write_buf() routines using memcpy - Use on-flash bad block table - Fix module refcounting - Avoid read/modify/write in hwcontrol() - Minor cosmetic fixes Partly based on code and ideas from Tom Sylla Signed-off-by: David Woodhouse commit c3f8abf481c2d2b221b028f7369bc6dd39a9590e Author: David Woodhouse Date: Sat May 13 04:03:42 2006 +0100 [MTD NAND] Use vmalloc for buffer when scanning for bad blocks. These new chips have 128KiB blocks. Don't try to kmalloc that. Signed-off-by: David Woodhouse commit 4992a9e88886b0c5ebc3d27eb74d0344c873eeea Author: Egry Gábor Date: Fri May 12 17:35:02 2006 +0100 Trivial typo fixes in Kconfig files (MTD). Signed-off-by: Egry Gábor Signed-off-by: David Woodhouse commit 752870707f2818b5f0d94ca05e46cb0ffee6cbf9 Author: Kyungmin Park Date: Fri May 12 17:03:23 2006 +0300 OneNAND: fix block command typo We need to check block cmd only instead with comparing with cmd Signed-off-by: Kyungmin Park commit 493c646077ef0b8668ed71b8057f81cb7454af87 Author: Kyungmin Park Date: Fri May 12 17:03:07 2006 +0300 OneNAND: One-Time Programmable (OTP) support One Block of the NAND Flash Array memory is reserved as a One-Time Programmable Block memory area. Also, 1st Block of NAND Flash Array can be used as OTP. The OTP block can be read, programmed and locked using the same operations as any other NAND Flash Array memory block. OTP block cannot be erased. OTP block is fully-guaranteed to be a valid block. Signed-off-by: Kyungmin Park commit 3cecf69ecde22199699c4f0e609dfed2a487b674 Author: Kyungmin Park Date: Fri May 12 17:02:51 2006 +0300 OneNAND: Handle erase correctly in Double Density Package (DDP) There's erase bug in DDP. We need to add DDP select in erase Signed-off-by: Kyungmin Park commit 34c1060959b61a5bb2e97a88411446028cebfa7c Author: Kyungmin Park Date: Fri May 12 17:02:46 2006 +0300 OneNAND: Write oob area with aligned size, mtd->oobsize There's some problem with write oob in serveral platform. So we write oob with oobsize aligned (16bytes) instead of 3 bytes (from {2, 3}) Signed-off-by: Kyungmin Park commit 8e6ec69059ba0eecbb2226d3d9e45c6efe6fb82b Author: Kyungmin Park Date: Fri May 12 17:02:41 2006 +0300 OneNAND: Add write_oob verify function Signed-off-by: Jarkko Lavinen commit d9777f1c42bffff0d21cd029a2415776aa874e96 Author: Jarkko Lavinen Date: Fri May 12 17:02:35 2006 +0300 OneNand: Fix free byte positions. Some free byte positions at onenand_oob_64 were wrong. This was also reported by Christian Lehne. 3 byte slots are at 2+16*i and 2 byte slots at 14+16*i. Signed-off-by: Jarkko Lavinen commit 9c01f87db183403a4f603fe5180c57b82b54b4a1 Author: Kyungmin Park Date: Fri May 12 17:02:31 2006 +0300 OneNAND: handle byte access on BufferRAM Signed-off-by: Kyungmin Park commit 628bee6593107c466e28462f58c5fd5cd4163c7c Author: Kyungmin Park Date: Fri May 12 17:02:24 2006 +0300 OneNAND: Add touch_softlock_watchdog() Signed-off-by: Kyungmin Park commit 20ffdcb00a792073f6e620dc2c644b3c8fbab528 Author: Jesper Juhl Date: Fri May 12 11:55:51 2006 +0100 [JFFS2] Remove number of pointer dereferences in fs/jffs2/summary.c Reduce the nr. of pointer dereferences in fs/jffs2/summary.c Benefits: - micro speed optimization due to fewer pointer derefs - generated code is slightly smaller - better readability (The first two sound like a compiler problem but I'll go with the third. dwmw2). Signed-off-by: Jesper Juhl Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse commit 1867b7e3f85dc69695735ea4a4cd12027c565d89 Author: Jean-Luc Leger Date: Fri May 12 11:53:40 2006 +0100 [MTD] Fix invalid default value of CONFIG_MTD_PCMCIA_ANONYMOUS in Kconfig Default values for boolean and tristate options can only be 'y', 'm' or 'n'. This patch removes wrong default for MTD_PCMCIA_ANONYMOUS. Signed-off-by: Jean-Luc Leger Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse commit 7e59f2ccd7fc2424b2e70132ac613d16acae37da Author: Domen Puncer Date: Fri May 12 11:51:46 2006 +0100 [JFFS2] Remove obsolete histo.h This file hasn't actually been used since the very early days of JFFS2 when Arjan was playing with compression methods. It can go now. Signed-off-by: Domen Puncer Signed-off-by: Alexey Dobriyan Acked-by: Arjan van de Ven Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse commit f0ad11d060c7acf727ead8339432bdd2bfd7f868 Author: David Woodhouse Date: Fri May 12 11:40:13 2006 +0100 [MTD] Fix capitalisation in export of old doc2001.c initfunc Oops. Stupid StudlyCaps. Again. This driver is doubly-deprecated because is was subsumed into doc2000.c and _also_ we want people to start using the new NAND wrapper for these devices anyway. But ISTR there was still one person using it because something didn't work for them. Must chase that up and then I can kill this. Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse commit 179fdc3f8dec5757ddbebd95a1b493d65fa08671 Author: David Woodhouse Date: Thu May 11 22:35:28 2006 +0100 [MTD] Basic NAND driver for AMD/NatSemi CS5535/CS5536 Geode companion chip This lacks hardware ECC support and a few optimisations we're going to want fairly soon, but it works well enough to mount and use JFFS2. Signed-off-by: David Woodhouse commit b04ecae3d62edea2af49fd40ab12435b5ad8a492 Author: David Woodhouse Date: Wed May 10 16:16:13 2006 +0100 [MTD] Fix capitalisation in export of DiskOnChip Millennium initfunc Stupid StudlyCaps. Who did that? Signed-off-by: David Woodhouse commit 83ea4ef213628683e5a63f2987a91044ab868051 Author: David Woodhouse Date: Mon May 8 22:58:25 2006 +0100 Export cfi_cmdset_0020 and cfi_cmdset_0002 with EXPORT_SYMBOL_GPL Signed-off-by: David Woodhouse commit 6f18a022fb311f07f3b32f2c0e1b5c9477dc4439 Author: David Woodhouse Date: Mon May 8 22:40:05 2006 +0100 Finally remove the obnoxious inter_module_xxx() This was already a bad plan when I argued against adding it in the first place. Good riddance. Signed-off-by: David Woodhouse commit a15bdeef108d282e540e202fc3c3e4bdf9692074 Author: David Woodhouse Date: Mon May 8 22:35:05 2006 +0100 Remove use of inter_module_crap in NOR flash chip drivers. Signed-off-by: David Woodhouse commit 396674e58fb9d01b7768ccb8db181aea8ebead0e Author: David Woodhouse Date: Mon May 8 17:10:11 2006 +0100 Fix non-modular case for DiskOnChip probe Signed-off-by: David Woodhouse commit 5e535429a9117b8b6219da0e0cb087f52c0c9597 Author: David Woodhouse Date: Mon May 8 14:05:05 2006 +0100 Remove inter_module_xxx() from DiskOnChip drivers. Finally putting it back how it was before Keith got at it -- yay :) Signed-off-by: David Woodhouse commit 73566edf9b91dd085ddb12033d0ea7288979dd10 Author: Lennert Buytenhek Date: Sun May 7 17:16:36 2006 +0100 [MTD] Convert physmap to platform driver After dwmw2 let me know it ought to be done, I rewrote the physmap map driver to be a platform driver. I know zilch about the driver model, so I probably botched it in some way, but I've done some tests on an ixp23xx board which uses physmap, and it all seems to work. In order to not break existing physmap users, I've added some compat code that will instantiate a platform device iff CONFIG_MTD_PHYSMAP_LEN is defined and != 0. Also, I've changed the default value for CONFIG_MTD_PHYSMAP_LEN to zero, so that people who inadvertently compile in physmap (or new, platform-style, users of physmap) don't get burned. This works pretty well -- the new physmap driver is a drop-in replacement for the old one, and works on said ixp23xx board without any code changes needed. (This should hold as long as users don't touch 'physmap_map' directly.) Once all physmap users have been converted to instantiate their own platform devices, the compat code can go. (Or we decide that we can change all the in-tree users at the same time, and never merge the compat code.) Signed-off-by: Lennert Buytenhek Signed-off-by: David Woodhouse commit 422138dd68202fbd8ca9fb0df65e92d733249374 Author: Dmitry Bazhenov Date: Fri May 5 22:46:49 2006 +0100 [JFFS2] Fix race in setting file attributes It seems like there is a potential race in the function jffs2_do_setattr() in the case when attributes of a symlink are updated. The symlink metadata is read without having f->sem locked. The following patch should fix the race. Signed-off-by: Dmitry Bazhenov Signed-off-by: David Woodhouse commit cbb9a56177b16294ed347ba7fcb1c66c8adb5dc4 Author: David Woodhouse Date: Wed May 3 13:07:27 2006 +0100 Move jffs2_fs_i.h and jffs2_fs_sb.h from include/linux/ to fs/jffs2/ Signed-off-by: David Woodhouse commit 7d532dd50de1c0cd7d15ba06ad7261e13474fef2 Author: Lennert Buytenhek Date: Sun Apr 30 10:36:38 2006 +0200 ts72xx NAND driver The TS-72xx is a series of embedded single board computers from Technologic Systems based on the Cirrus ep93xx (arm920t based) CPU. The TS-7200 uses NOR flash, while all the other models in the series (TS-7250, TS-7260) use NAND flash -- included is a driver for the NAND flash on those boards. Signed-off-by: Lennert Buytenhek Signed-off-by: David Woodhouse commit fbbc21c6a491503e55e08e3f7c4629c1337ea1cc Author: Daniel Drake Date: Sat Apr 29 11:41:44 2006 +0100 mtd: SC520CDP should depend on MTD_CONCAT Toralf Förster found a compile error when CONFIG_MTD_SC520CDP=y and CONFIG_MTD_CONCAT=n: drivers/built-in.o: In function `init_sc520cdp': sc520cdp.c:(.init.text+0xb4de): undefined reference to `mtd_concat_create' drivers/built-in.o: In function `cleanup_sc520cdp': sc520cdp.c:(.exit.text+0x14bc): undefined reference to `mtd_concat_destroy' This patch fixes it. Signed-off-by: Daniel Drake Signed-off-by: Josh Boyer commit 954c24227318c166ec1925e1229db442e1f56f51 Author: Joern Engel Date: Tue Apr 18 21:03:08 2006 -0700 mtd: improve parameter parsing for block2mtd Expand the parameter parsing for block2mtd. It now accepts: Ki, Mi, Gi - the official prefixes for binary multiples, see http://physics.nist.gov/cuu/Units/binary.html, ki - mistake on my side and analog to "k" for decimal multiples, KiB, MiB, GiB - for people that prefer to add a "B" for byte, kiB - combination of the above. There were complaints about not accepting "k" for 1024. This has long been common practice, but is known to lead to confusion. Hence the new SI units and hence block2mtd only accepts units that cannot be confused with decimal units. Diverging from common practice doesn't always please people, even if the change is for the better. Signed-off-by: Joern Engel Cc: David Woodhouse Cc: Thomas Gleixner Signed-off-by: Andrew Morton commit 373d5e71833978fe3d91264d86857762bb92cfe2 Author: Richard Purdie Date: Tue Apr 18 02:05:46 2006 +0100 JFFS2: Return an error for long filenames Return an error if a name is too long for JFFS2 rather than corrupting data. Signed-off-by: Richard Purdie commit 6e62e8c2c7b1e3387d73ecb3f7539314b7a9931e Author: Richard Purdie Date: Tue Apr 18 02:04:18 2006 +0100 MTD: Correct Poodle partition size Correct the MTD NAND partition size for Poodle (Sharp Zaurus SL-5600) Signed-off-by: Richard Purdie commit b802c0741103aa92251d536c115874d51f802ec8 Author: Thago Galesi Date: Mon Apr 17 17:38:15 2006 +0100 [PATCH] Remove unnecessary kmalloc/kfree calls in mtdchar This patch removes repeated calls to kmalloc / kfree in mtd_write / mtd_read functions, replacing them by a single kmalloc / kfree pair. Signed-off-by: Thiago Galesi Signed-off-by: David Woodhouse commit cd2866faaa0efd9af18fe4a86d129cbd99240796 Author: Jörn Engel Date: Thu Apr 13 18:55:09 2006 +0200 Remove unused MTD types Three types are never set or checked for. Remove. Signed-off-by: Jörn Engel Signed-off-by: David Woodhouse commit a6c591eda3078f92e7a3ff3db55f6841e4819fb5 Author: Jörn Engel Date: Thu Apr 13 18:54:34 2006 +0200 Remove unchecked MTD flags Several flags are set by some devices, but never checked. Remove them. Signed-off-by: Jörn Engel Signed-off-by: David Woodhouse commit af63a3bcac77d8c01f3d963bac11a6f3f9b7c473 Author: Jörn Engel Date: Thu Apr 13 18:53:55 2006 +0200 Make mtdblock_ro unconditionally readonly mtdblock_ro is by definition readonly. Remove the silly checks. Signed-off-by: Jörn Engel Signed-off-by: David Woodhouse commit 7f7c08dfdf5bc0a7c906285d9d97b932f83e8979 Author: Jörn Engel Date: Thu Apr 13 18:53:14 2006 +0200 Simplify test for RAM devices mtdblock is the only user of aggregate capabilities in mtd. This is clearly bogus and should be changed. In particular, it tries to determine whether the device in question is a piece of RAM. For every single driver that fits the current criteria, an easier test would be to check for the type being MTD_RAM. Signed-off-by: Jörn Engel Signed-off-by: David Woodhouse commit d96fb997c6174f98a2a0a98200f99ac13b053bd6 Author: David Woodhouse Date: Mon Apr 17 00:19:48 2006 +0100 [JFFS2] Fix race in post-mount node checking For a while now, we've postponed CRC-checking of data nodes to be done by the GC thread, instead of being done while the user is waiting for mount to finish. The GC thread would iterate through all the inodes on the system and check each of their data nodes. It would skip over inodes which had already been used or were already being read in by read_inode(), because their data nodes would have been examined anyway. However, we could sometimes reach the end of the for-each-inode loop and still have some unchecked space left, if an inode we'd skipped was _still_ in the process of being read. This fixes that race by actually waiting for read_inode() to finish rather than just moving on. Thanks to Ladislav Michl for coming up with a reproducible test case and helping to track it down. Signed-off-by: David Woodhouse commit fb6a82c94a9c69adfb6b9f6ce9f84be36884e471 Author: Randy Dunlap Date: Tue Apr 11 20:12:10 2006 -0400 [PATCH] jffs2: fix printk warnings Fix printk format warnings in jffs2. Signed-off-by: Randy Dunlap Signed-off-by: David Woodhouse commit b104513c74d972f09737017394c5abc7e0a6835d Author: Randy Dunlap Date: Tue Apr 11 20:05:20 2006 -0400 [PATCH] MTD: m25p80: fix printk format warning Fix printk format warning: drivers/mtd/devices/m25p80.c:189: warning: format '%zd' expects type 'signed size_t', but argument 6 has type 'u_int32_t' Signed-off-by: Randy Dunlap Signed-off-by: David Woodhouse commit 6cc449c7d0292cb9b993f0df84fd3225e3099492 Author: Jesper Juhl Date: Tue Apr 11 19:42:44 2006 -0400 [PATCH] mtd, nettel: fix build error and implicit declaration I just hit the following error and warning : drivers/mtd/maps/nettel.c: In function `nettel_init': drivers/mtd/maps/nettel.c:418: error: `ROOT_DEV' undeclared (first use in this function) drivers/mtd/maps/nettel.c:418: error: (Each undeclared identifier is reported only once drivers/mtd/maps/nettel.c:418: error: for each function it appears in.) drivers/mtd/maps/nettel.c:418: warning: implicit declaration of function `MKDEV' make[3]: *** [drivers/mtd/maps/nettel.o] Error 1 make[2]: *** [drivers/mtd/maps] Error 2 make[1]: *** [drivers/mtd] Error 2 The patch fixes the missing ROOT_DEV declaration by including linux/root_dev.h and fixes the implicit declaration of MKDEV by including linux/kdev_t.h . Signed-off-by: Jesper Juhl Signed-off-by: David Woodhouse commit f4e9ce66c70c5d08b8a4d2c676924748c8b7550b Author: David Woodhouse Date: Tue Apr 11 19:29:07 2006 -0400 New MTD git tree in MAINTAINERS Signed-off-by: David Woodhouse --- Signed-off-by: Andrew Morton --- MAINTAINERS | 4 drivers/mtd/Kconfig | 4 drivers/mtd/chips/Kconfig | 1 drivers/mtd/chips/Makefile | 7 drivers/mtd/chips/amd_flash.c | 7 drivers/mtd/chips/cfi_cmdset_0001.c | 474 +-- drivers/mtd/chips/cfi_cmdset_0002.c | 21 drivers/mtd/chips/cfi_cmdset_0020.c | 22 drivers/mtd/chips/cfi_probe.c | 8 drivers/mtd/chips/gen_probe.c | 45 drivers/mtd/chips/map_ram.c | 2 drivers/mtd/devices/Kconfig | 6 drivers/mtd/devices/Makefile | 7 drivers/mtd/devices/block2mtd.c | 27 drivers/mtd/devices/doc2000.c | 129 - drivers/mtd/devices/doc2001.c | 60 drivers/mtd/devices/doc2001plus.c | 60 drivers/mtd/devices/docprobe.c | 26 drivers/mtd/devices/phram.c | 16 drivers/mtd/devices/slram.c | 3 drivers/mtd/inftlcore.c | 190 + drivers/mtd/inftlmount.c | 60 drivers/mtd/maps/Kconfig | 11 drivers/mtd/maps/cfi_flagadm.c | 4 drivers/mtd/maps/dbox2-flash.c | 2 drivers/mtd/maps/mtx-1_flash.c | 2 drivers/mtd/maps/nettel.c | 4 drivers/mtd/maps/pcmciamtd.c | 1 drivers/mtd/maps/physmap.c | 255 +- drivers/mtd/mtdblock.c | 16 drivers/mtd/mtdblock_ro.c | 4 drivers/mtd/mtdchar.c | 132 - drivers/mtd/mtdconcat.c | 310 +- drivers/mtd/mtdcore.c | 32 drivers/mtd/mtdpart.c | 136 - drivers/mtd/nand/Kconfig | 47 drivers/mtd/nand/Makefile | 4 drivers/mtd/nand/ams-delta.c | 237 + drivers/mtd/nand/au1550nd.c | 321 +- drivers/mtd/nand/autcpu12.c | 127 - drivers/mtd/nand/cs553x_nand.c | 353 ++ drivers/mtd/nand/diskonchip.c | 530 ++-- drivers/mtd/nand/edb7312.c | 95 drivers/mtd/nand/h1910.c | 96 drivers/mtd/nand/nand_base.c | 3144 +++++++++++--------------- drivers/mtd/nand/nand_bbt.c | 499 ++-- drivers/mtd/nand/nand_ecc.c | 227 - drivers/mtd/nand/nand_ids.c | 177 - drivers/mtd/nand/nandsim.c | 95 drivers/mtd/nand/ndfc.c | 316 ++ drivers/mtd/nand/ppchameleonevb.c | 252 +- drivers/mtd/nand/rtc_from4.c | 347 +- drivers/mtd/nand/s3c2410.c | 163 - drivers/mtd/nand/sharpsl.c | 146 - drivers/mtd/nand/spia.c | 103 drivers/mtd/nand/toto.c | 121 - drivers/mtd/nand/ts7250.c | 206 + drivers/mtd/nftlcore.c | 219 + drivers/mtd/nftlmount.c | 91 drivers/mtd/onenand/Kconfig | 14 drivers/mtd/onenand/onenand_base.c | 718 +++-- drivers/mtd/onenand/onenand_bbt.c | 9 drivers/mtd/redboot.c | 18 drivers/mtd/rfd_ftl.c | 48 fs/Kconfig | 38 fs/jffs/intrep.c | 15 fs/jffs2/Makefile | 3 fs/jffs2/README.Locking | 21 fs/jffs2/acl.c | 485 ++++ fs/jffs2/acl.h | 45 fs/jffs2/build.c | 2 fs/jffs2/compr.c | 4 fs/jffs2/compr.h | 4 fs/jffs2/compr_zlib.c | 4 fs/jffs2/debug.c | 14 fs/jffs2/debug.h | 6 fs/jffs2/dir.c | 121 - fs/jffs2/erase.c | 56 fs/jffs2/file.c | 35 fs/jffs2/fs.c | 63 fs/jffs2/gc.c | 131 - fs/jffs2/histo.h | 3 fs/jffs2/jffs2_fs_i.h | 55 fs/jffs2/jffs2_fs_sb.h | 133 + fs/jffs2/malloc.c | 127 - fs/jffs2/nodelist.c | 183 + fs/jffs2/nodelist.h | 189 - fs/jffs2/nodemgmt.c | 170 - fs/jffs2/os-linux.h | 23 fs/jffs2/readinode.c | 6 fs/jffs2/scan.c | 442 ++- fs/jffs2/security.c | 82 fs/jffs2/summary.c | 479 ++- fs/jffs2/summary.h | 64 fs/jffs2/super.c | 20 fs/jffs2/symlink.c | 7 fs/jffs2/wbuf.c | 976 ++++---- fs/jffs2/write.c | 147 - fs/jffs2/xattr.c | 1238 ++++++++++ fs/jffs2/xattr.h | 116 fs/jffs2/xattr_trusted.c | 52 fs/jffs2/xattr_user.c | 52 include/linux/jffs2.h | 56 include/linux/jffs2_fs_i.h | 50 include/linux/jffs2_fs_sb.h | 122 - include/linux/module.h | 9 include/linux/mtd/inftl.h | 2 include/linux/mtd/mtd.h | 105 include/linux/mtd/nand.h | 344 +- include/linux/mtd/ndfc.h | 67 include/linux/mtd/nftl.h | 2 include/linux/mtd/onenand.h | 11 include/linux/mtd/onenand_regs.h | 8 include/linux/mtd/partitions.h | 2 include/linux/mtd/physmap.h | 2 include/mtd/mtd-abi.h | 60 include/mtd/mtd-user.h | 1 init/Kconfig | 3 kernel/Makefile | 1 kernel/intermodule.c | 184 - 120 files changed, 10690 insertions(+), 6761 deletions(-) diff -puN drivers/mtd/chips/amd_flash.c~git-mtd drivers/mtd/chips/amd_flash.c --- devel/drivers/mtd/chips/amd_flash.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/chips/amd_flash.c 2006-05-29 15:02:34.000000000 -0700 @@ -97,7 +97,6 @@ struct amd_flash_private { int interleave; int numchips; unsigned long chipshift; -// const char *im_name; struct flchip chips[0]; }; @@ -131,12 +130,6 @@ static struct mtd_chip_driver amd_flash_ .module = THIS_MODULE }; - - -static const char im_name[] = "amd_flash"; - - - static inline __u32 wide_read(struct map_info *map, __u32 addr) { if (map->buswidth == 1) { diff -puN drivers/mtd/chips/cfi_cmdset_0001.c~git-mtd drivers/mtd/chips/cfi_cmdset_0001.c --- devel/drivers/mtd/chips/cfi_cmdset_0001.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/chips/cfi_cmdset_0001.c 2006-05-29 15:02:34.000000000 -0700 @@ -331,13 +331,6 @@ read_pri_intelext(struct map_info *map, return extp; } -/* This routine is made available to other mtd code via - * inter_module_register. It must only be accessed through - * inter_module_get which will bump the use count of this module. The - * addresses passed back in cfi are valid as long as the use count of - * this module is non-zero, i.e. between inter_module_get and - * inter_module_put. Keith Owens 29 Oct 2000. - */ struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary) { struct cfi_private *cfi = map->fldrv_priv; @@ -406,7 +399,7 @@ struct mtd_info *cfi_cmdset_0001(struct for (i=0; i< cfi->numchips; i++) { cfi->chips[i].word_write_time = 1<cfiq->WordWriteTimeoutTyp; cfi->chips[i].buffer_write_time = 1<cfiq->BufWriteTimeoutTyp; - cfi->chips[i].erase_time = 1<cfiq->BlockEraseTimeoutTyp; + cfi->chips[i].erase_time = 1000<cfiq->BlockEraseTimeoutTyp; cfi->chips[i].ref_point_counter = 0; init_waitqueue_head(&(cfi->chips[i].wq)); } @@ -415,6 +408,11 @@ struct mtd_info *cfi_cmdset_0001(struct return cfi_intelext_setup(mtd); } +struct mtd_info *cfi_cmdset_0003(struct map_info *map, int primary) __attribute__((alias("cfi_cmdset_0001"))); +struct mtd_info *cfi_cmdset_0200(struct map_info *map, int primary) __attribute__((alias("cfi_cmdset_0001"))); +EXPORT_SYMBOL_GPL(cfi_cmdset_0001); +EXPORT_SYMBOL_GPL(cfi_cmdset_0003); +EXPORT_SYMBOL_GPL(cfi_cmdset_0200); static struct mtd_info *cfi_intelext_setup(struct mtd_info *mtd) { @@ -547,12 +545,12 @@ static int cfi_intelext_partition_fixup( if (extp->MinorVersion >= '4') { struct cfi_intelext_programming_regioninfo *prinfo; prinfo = (struct cfi_intelext_programming_regioninfo *)&extp->extra[offs]; - MTD_PROGREGION_SIZE(mtd) = cfi->interleave << prinfo->ProgRegShift; + mtd->writesize = cfi->interleave << prinfo->ProgRegShift; MTD_PROGREGION_CTRLMODE_VALID(mtd) = cfi->interleave * prinfo->ControlValid; MTD_PROGREGION_CTRLMODE_INVALID(mtd) = cfi->interleave * prinfo->ControlInvalid; - mtd->flags |= MTD_PROGRAM_REGIONS; + mtd->flags &= ~MTD_BIT_WRITEABLE; printk(KERN_DEBUG "%s: program region size/ctrl_valid/ctrl_inval = %d/%d/%d\n", - map->name, MTD_PROGREGION_SIZE(mtd), + map->name, mtd->writesize, MTD_PROGREGION_CTRLMODE_VALID(mtd), MTD_PROGREGION_CTRLMODE_INVALID(mtd)); } @@ -896,26 +894,33 @@ static void __xipram xip_enable(struct m /* * When a delay is required for the flash operation to complete, the - * xip_udelay() function is polling for both the given timeout and pending - * (but still masked) hardware interrupts. Whenever there is an interrupt - * pending then the flash erase or write operation is suspended, array mode - * restored and interrupts unmasked. Task scheduling might also happen at that - * point. The CPU eventually returns from the interrupt or the call to - * schedule() and the suspended flash operation is resumed for the remaining - * of the delay period. + * xip_wait_for_operation() function is polling for both the given timeout + * and pending (but still masked) hardware interrupts. Whenever there is an + * interrupt pending then the flash erase or write operation is suspended, + * array mode restored and interrupts unmasked. Task scheduling might also + * happen at that point. The CPU eventually returns from the interrupt or + * the call to schedule() and the suspended flash operation is resumed for + * the remaining of the delay period. * * Warning: this function _will_ fool interrupt latency tracing tools. */ -static void __xipram xip_udelay(struct map_info *map, struct flchip *chip, - unsigned long adr, int usec) +static int __xipram xip_wait_for_operation( + struct map_info *map, struct flchip *chip, + unsigned long adr, int *chip_op_time ) { struct cfi_private *cfi = map->fldrv_priv; struct cfi_pri_intelext *cfip = cfi->cmdset_priv; map_word status, OK = CMD(0x80); - unsigned long suspended, start = xip_currtime(); + unsigned long usec, suspended, start, done; flstate_t oldstate, newstate; + start = xip_currtime(); + usec = *chip_op_time * 8; + if (usec == 0) + usec = 500000; + done = 0; + do { cpu_relax(); if (xip_irqpending() && cfip && @@ -932,9 +937,9 @@ static void __xipram xip_udelay(struct m * we resume the whole thing at once). Yes, it * can happen! */ + usec -= done; map_write(map, CMD(0xb0), adr); map_write(map, CMD(0x70), adr); - usec -= xip_elapsed_since(start); suspended = xip_currtime(); do { if (xip_elapsed_since(suspended) > 100000) { @@ -944,7 +949,7 @@ static void __xipram xip_udelay(struct m * This is a critical error but there * is not much we can do here. */ - return; + return -EIO; } status = map_read(map, adr); } while (!map_word_andequal(map, status, OK, OK)); @@ -1004,65 +1009,107 @@ static void __xipram xip_udelay(struct m xip_cpu_idle(); } status = map_read(map, adr); + done = xip_elapsed_since(start); } while (!map_word_andequal(map, status, OK, OK) - && xip_elapsed_since(start) < usec); -} + && done < usec); -#define UDELAY(map, chip, adr, usec) xip_udelay(map, chip, adr, usec) + return (done >= usec) ? -ETIME : 0; +} /* * The INVALIDATE_CACHED_RANGE() macro is normally used in parallel while * the flash is actively programming or erasing since we have to poll for * the operation to complete anyway. We can't do that in a generic way with * a XIP setup so do it before the actual flash operation in this case - * and stub it out from INVALIDATE_CACHE_UDELAY. + * and stub it out from INVAL_CACHE_AND_WAIT. */ #define XIP_INVAL_CACHED_RANGE(map, from, size) \ INVALIDATE_CACHED_RANGE(map, from, size) -#define INVALIDATE_CACHE_UDELAY(map, chip, cmd_adr, adr, len, usec) \ - UDELAY(map, chip, cmd_adr, usec) - -/* - * Extra notes: - * - * Activating this XIP support changes the way the code works a bit. For - * example the code to suspend the current process when concurrent access - * happens is never executed because xip_udelay() will always return with the - * same chip state as it was entered with. This is why there is no care for - * the presence of add_wait_queue() or schedule() calls from within a couple - * xip_disable()'d areas of code, like in do_erase_oneblock for example. - * The queueing and scheduling are always happening within xip_udelay(). - * - * Similarly, get_chip() and put_chip() just happen to always be executed - * with chip->state set to FL_READY (or FL_XIP_WHILE_*) where flash state - * is in array mode, therefore never executing many cases therein and not - * causing any problem with XIP. - */ +#define INVAL_CACHE_AND_WAIT(map, chip, cmd_adr, inval_adr, inval_len, p_usec) \ + xip_wait_for_operation(map, chip, cmd_adr, p_usec) #else #define xip_disable(map, chip, adr) #define xip_enable(map, chip, adr) #define XIP_INVAL_CACHED_RANGE(x...) +#define INVAL_CACHE_AND_WAIT inval_cache_and_wait_for_operation -#define UDELAY(map, chip, adr, usec) \ -do { \ - spin_unlock(chip->mutex); \ - cfi_udelay(usec); \ - spin_lock(chip->mutex); \ -} while (0) - -#define INVALIDATE_CACHE_UDELAY(map, chip, cmd_adr, adr, len, usec) \ -do { \ - spin_unlock(chip->mutex); \ - INVALIDATE_CACHED_RANGE(map, adr, len); \ - cfi_udelay(usec); \ - spin_lock(chip->mutex); \ -} while (0) +static int inval_cache_and_wait_for_operation( + struct map_info *map, struct flchip *chip, + unsigned long cmd_adr, unsigned long inval_adr, int inval_len, + int *chip_op_time ) +{ + struct cfi_private *cfi = map->fldrv_priv; + map_word status, status_OK = CMD(0x80); + int z, chip_state = chip->state; + unsigned long timeo; + + spin_unlock(chip->mutex); + if (inval_len) + INVALIDATE_CACHED_RANGE(map, inval_adr, inval_len); + if (*chip_op_time) + cfi_udelay(*chip_op_time); + spin_lock(chip->mutex); + + timeo = *chip_op_time * 8 * HZ / 1000000; + if (timeo < HZ/2) + timeo = HZ/2; + timeo += jiffies; + + z = 0; + for (;;) { + if (chip->state != chip_state) { + /* Someone's suspended the operation: sleep */ + DECLARE_WAITQUEUE(wait, current); + + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + spin_unlock(chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + timeo = jiffies + (HZ / 2); /* FIXME */ + spin_lock(chip->mutex); + continue; + } + + status = map_read(map, cmd_adr); + if (map_word_andequal(map, status, status_OK, status_OK)) + break; + + /* OK Still waiting */ + if (time_after(jiffies, timeo)) { + map_write(map, CMD(0x70), cmd_adr); + chip->state = FL_STATUS; + return -ETIME; + } + + /* Latency issues. Drop the lock, wait a while and retry */ + z++; + spin_unlock(chip->mutex); + cfi_udelay(1); + spin_lock(chip->mutex); + } + + if (!z) { + if (!--(*chip_op_time)) + *chip_op_time = 1; + } else if (z > 1) + ++(*chip_op_time); + + /* Done and happy. */ + chip->state = FL_STATUS; + return 0; +} #endif +#define WAIT_TIMEOUT(map, chip, adr, udelay) \ + ({ int __udelay = (udelay); \ + INVAL_CACHE_AND_WAIT(map, chip, adr, 0, 0, &__udelay); }) + + static int do_point_onechip (struct map_info *map, struct flchip *chip, loff_t adr, size_t len) { unsigned long cmd_addr; @@ -1252,14 +1299,11 @@ static int __xipram do_write_oneword(str unsigned long adr, map_word datum, int mode) { struct cfi_private *cfi = map->fldrv_priv; - map_word status, status_OK, write_cmd; - unsigned long timeo; - int z, ret=0; + map_word status, write_cmd; + int ret=0; adr += chip->start; - /* Let's determine those according to the interleave only once */ - status_OK = CMD(0x80); switch (mode) { case FL_WRITING: write_cmd = (cfi->cfiq->P_ID != 0x0200) ? CMD(0x40) : CMD(0x41); @@ -1285,57 +1329,17 @@ static int __xipram do_write_oneword(str map_write(map, datum, adr); chip->state = mode; - INVALIDATE_CACHE_UDELAY(map, chip, adr, - adr, map_bankwidth(map), - chip->word_write_time); - - timeo = jiffies + (HZ/2); - z = 0; - for (;;) { - if (chip->state != mode) { - /* Someone's suspended the write. Sleep */ - DECLARE_WAITQUEUE(wait, current); - - set_current_state(TASK_UNINTERRUPTIBLE); - add_wait_queue(&chip->wq, &wait); - spin_unlock(chip->mutex); - schedule(); - remove_wait_queue(&chip->wq, &wait); - timeo = jiffies + (HZ / 2); /* FIXME */ - spin_lock(chip->mutex); - continue; - } - - status = map_read(map, adr); - if (map_word_andequal(map, status, status_OK, status_OK)) - break; - - /* OK Still waiting */ - if (time_after(jiffies, timeo)) { - map_write(map, CMD(0x70), adr); - chip->state = FL_STATUS; - xip_enable(map, chip, adr); - printk(KERN_ERR "%s: word write error (status timeout)\n", map->name); - ret = -EIO; - goto out; - } - - /* Latency issues. Drop the lock, wait a while and retry */ - z++; - UDELAY(map, chip, adr, 1); - } - if (!z) { - chip->word_write_time--; - if (!chip->word_write_time) - chip->word_write_time = 1; + ret = INVAL_CACHE_AND_WAIT(map, chip, adr, + adr, map_bankwidth(map), + &chip->word_write_time); + if (ret) { + xip_enable(map, chip, adr); + printk(KERN_ERR "%s: word write error (status timeout)\n", map->name); + goto out; } - if (z > 1) - chip->word_write_time++; - - /* Done and happy. */ - chip->state = FL_STATUS; /* check for errors */ + status = map_read(map, adr); if (map_word_bitsset(map, status, CMD(0x1a))) { unsigned long chipstatus = MERGESTATUS(status); @@ -1452,9 +1456,9 @@ static int __xipram do_write_buffer(stru unsigned long *pvec_seek, int len) { struct cfi_private *cfi = map->fldrv_priv; - map_word status, status_OK, write_cmd, datum; - unsigned long cmd_adr, timeo; - int wbufsize, z, ret=0, word_gap, words; + map_word status, write_cmd, datum; + unsigned long cmd_adr; + int ret, wbufsize, word_gap, words; const struct kvec *vec; unsigned long vec_seek; @@ -1463,7 +1467,6 @@ static int __xipram do_write_buffer(stru cmd_adr = adr & ~(wbufsize-1); /* Let's determine this according to the interleave only once */ - status_OK = CMD(0x80); write_cmd = (cfi->cfiq->P_ID != 0x0200) ? CMD(0xe8) : CMD(0xe9); spin_lock(chip->mutex); @@ -1477,12 +1480,14 @@ static int __xipram do_write_buffer(stru ENABLE_VPP(map); xip_disable(map, chip, cmd_adr); - /* §4.8 of the 28FxxxJ3A datasheet says "Any time SR.4 and/or SR.5 is set + /* §4.8 of the 28FxxxJ3A datasheet says "Any time SR.4 and/or SR.5 is set [...], the device will not accept any more Write to Buffer commands". So we must check here and reset those bits if they're set. Otherwise we're just pissing in the wind */ - if (chip->state != FL_STATUS) + if (chip->state != FL_STATUS) { map_write(map, CMD(0x70), cmd_adr); + chip->state = FL_STATUS; + } status = map_read(map, cmd_adr); if (map_word_bitsset(map, status, CMD(0x30))) { xip_enable(map, chip, cmd_adr); @@ -1493,32 +1498,20 @@ static int __xipram do_write_buffer(stru } chip->state = FL_WRITING_TO_BUFFER; - - z = 0; - for (;;) { - map_write(map, write_cmd, cmd_adr); - + map_write(map, write_cmd, cmd_adr); + ret = WAIT_TIMEOUT(map, chip, cmd_adr, 0); + if (ret) { + /* Argh. Not ready for write to buffer */ + map_word Xstatus = map_read(map, cmd_adr); + map_write(map, CMD(0x70), cmd_adr); + chip->state = FL_STATUS; status = map_read(map, cmd_adr); - if (map_word_andequal(map, status, status_OK, status_OK)) - break; - - UDELAY(map, chip, cmd_adr, 1); - - if (++z > 20) { - /* Argh. Not ready for write to buffer */ - map_word Xstatus; - map_write(map, CMD(0x70), cmd_adr); - chip->state = FL_STATUS; - Xstatus = map_read(map, cmd_adr); - /* Odd. Clear status bits */ - map_write(map, CMD(0x50), cmd_adr); - map_write(map, CMD(0x70), cmd_adr); - xip_enable(map, chip, cmd_adr); - printk(KERN_ERR "%s: Chip not ready for buffer write. status = %lx, Xstatus = %lx\n", - map->name, status.x[0], Xstatus.x[0]); - ret = -EIO; - goto out; - } + map_write(map, CMD(0x50), cmd_adr); + map_write(map, CMD(0x70), cmd_adr); + xip_enable(map, chip, cmd_adr); + printk(KERN_ERR "%s: Chip not ready for buffer write. Xstatus = %lx, status = %lx\n", + map->name, Xstatus.x[0], status.x[0]); + goto out; } /* Figure out the number of words to write */ @@ -1573,56 +1566,19 @@ static int __xipram do_write_buffer(stru map_write(map, CMD(0xd0), cmd_adr); chip->state = FL_WRITING; - INVALIDATE_CACHE_UDELAY(map, chip, cmd_adr, - adr, len, - chip->buffer_write_time); - - timeo = jiffies + (HZ/2); - z = 0; - for (;;) { - if (chip->state != FL_WRITING) { - /* Someone's suspended the write. Sleep */ - DECLARE_WAITQUEUE(wait, current); - set_current_state(TASK_UNINTERRUPTIBLE); - add_wait_queue(&chip->wq, &wait); - spin_unlock(chip->mutex); - schedule(); - remove_wait_queue(&chip->wq, &wait); - timeo = jiffies + (HZ / 2); /* FIXME */ - spin_lock(chip->mutex); - continue; - } - - status = map_read(map, cmd_adr); - if (map_word_andequal(map, status, status_OK, status_OK)) - break; - - /* OK Still waiting */ - if (time_after(jiffies, timeo)) { - map_write(map, CMD(0x70), cmd_adr); - chip->state = FL_STATUS; - xip_enable(map, chip, cmd_adr); - printk(KERN_ERR "%s: buffer write error (status timeout)\n", map->name); - ret = -EIO; - goto out; - } - - /* Latency issues. Drop the lock, wait a while and retry */ - z++; - UDELAY(map, chip, cmd_adr, 1); - } - if (!z) { - chip->buffer_write_time--; - if (!chip->buffer_write_time) - chip->buffer_write_time = 1; + ret = INVAL_CACHE_AND_WAIT(map, chip, cmd_adr, + adr, len, + &chip->buffer_write_time); + if (ret) { + map_write(map, CMD(0x70), cmd_adr); + chip->state = FL_STATUS; + xip_enable(map, chip, cmd_adr); + printk(KERN_ERR "%s: buffer write error (status timeout)\n", map->name); + goto out; } - if (z > 1) - chip->buffer_write_time++; - - /* Done and happy. */ - chip->state = FL_STATUS; /* check for errors */ + status = map_read(map, cmd_adr); if (map_word_bitsset(map, status, CMD(0x1a))) { unsigned long chipstatus = MERGESTATUS(status); @@ -1693,6 +1649,11 @@ static int cfi_intelext_writev (struct m if (chipnum == cfi->numchips) return 0; } + + /* Be nice and reschedule with the chip in a usable state for other + processes. */ + cond_resched(); + } while (len); return 0; @@ -1713,17 +1674,12 @@ static int __xipram do_erase_oneblock(st unsigned long adr, int len, void *thunk) { struct cfi_private *cfi = map->fldrv_priv; - map_word status, status_OK; - unsigned long timeo; + map_word status; int retries = 3; - DECLARE_WAITQUEUE(wait, current); - int ret = 0; + int ret; adr += chip->start; - /* Let's determine this according to the interleave only once */ - status_OK = CMD(0x80); - retry: spin_lock(chip->mutex); ret = get_chip(map, chip, adr, FL_ERASING); @@ -1745,48 +1701,15 @@ static int __xipram do_erase_oneblock(st chip->state = FL_ERASING; chip->erase_suspended = 0; - INVALIDATE_CACHE_UDELAY(map, chip, adr, - adr, len, - chip->erase_time*1000/2); - - /* FIXME. Use a timer to check this, and return immediately. */ - /* Once the state machine's known to be working I'll do that */ - - timeo = jiffies + (HZ*20); - for (;;) { - if (chip->state != FL_ERASING) { - /* Someone's suspended the erase. Sleep */ - set_current_state(TASK_UNINTERRUPTIBLE); - add_wait_queue(&chip->wq, &wait); - spin_unlock(chip->mutex); - schedule(); - remove_wait_queue(&chip->wq, &wait); - spin_lock(chip->mutex); - continue; - } - if (chip->erase_suspended) { - /* This erase was suspended and resumed. - Adjust the timeout */ - timeo = jiffies + (HZ*20); /* FIXME */ - chip->erase_suspended = 0; - } - - status = map_read(map, adr); - if (map_word_andequal(map, status, status_OK, status_OK)) - break; - - /* OK Still waiting */ - if (time_after(jiffies, timeo)) { - map_write(map, CMD(0x70), adr); - chip->state = FL_STATUS; - xip_enable(map, chip, adr); - printk(KERN_ERR "%s: block erase error: (status timeout)\n", map->name); - ret = -EIO; - goto out; - } - - /* Latency issues. Drop the lock, wait a while and retry */ - UDELAY(map, chip, adr, 1000000/HZ); + ret = INVAL_CACHE_AND_WAIT(map, chip, adr, + adr, len, + &chip->erase_time); + if (ret) { + map_write(map, CMD(0x70), adr); + chip->state = FL_STATUS; + xip_enable(map, chip, adr); + printk(KERN_ERR "%s: block erase error: (status timeout)\n", map->name); + goto out; } /* We've broken this before. It doesn't hurt to be safe */ @@ -1815,7 +1738,6 @@ static int __xipram do_erase_oneblock(st ret = -EIO; } else if (chipstatus & 0x20 && retries--) { printk(KERN_DEBUG "block erase failed at 0x%08lx: status 0x%lx. Retrying...\n", adr, chipstatus); - timeo = jiffies + HZ; put_chip(map, chip, adr); spin_unlock(chip->mutex); goto retry; @@ -1921,15 +1843,11 @@ static int __xipram do_xxlock_oneblock(s { struct cfi_private *cfi = map->fldrv_priv; struct cfi_pri_intelext *extp = cfi->cmdset_priv; - map_word status, status_OK; - unsigned long timeo = jiffies + HZ; + int udelay; int ret; adr += chip->start; - /* Let's determine this according to the interleave only once */ - status_OK = CMD(0x80); - spin_lock(chip->mutex); ret = get_chip(map, chip, adr, FL_LOCKING); if (ret) { @@ -1954,41 +1872,21 @@ static int __xipram do_xxlock_oneblock(s * If Instant Individual Block Locking supported then no need * to delay. */ + udelay = (!extp || !(extp->FeatureSupport & (1 << 5))) ? 1000000/HZ : 0; - if (!extp || !(extp->FeatureSupport & (1 << 5))) - UDELAY(map, chip, adr, 1000000/HZ); - - /* FIXME. Use a timer to check this, and return immediately. */ - /* Once the state machine's known to be working I'll do that */ - - timeo = jiffies + (HZ*20); - for (;;) { - - status = map_read(map, adr); - if (map_word_andequal(map, status, status_OK, status_OK)) - break; - - /* OK Still waiting */ - if (time_after(jiffies, timeo)) { - map_write(map, CMD(0x70), adr); - chip->state = FL_STATUS; - xip_enable(map, chip, adr); - printk(KERN_ERR "%s: block unlock error: (status timeout)\n", map->name); - put_chip(map, chip, adr); - spin_unlock(chip->mutex); - return -EIO; - } - - /* Latency issues. Drop the lock, wait a while and retry */ - UDELAY(map, chip, adr, 1); + ret = WAIT_TIMEOUT(map, chip, adr, udelay); + if (ret) { + map_write(map, CMD(0x70), adr); + chip->state = FL_STATUS; + xip_enable(map, chip, adr); + printk(KERN_ERR "%s: block unlock error: (status timeout)\n", map->name); + goto out; } - /* Done and happy. */ - chip->state = FL_STATUS; xip_enable(map, chip, adr); - put_chip(map, chip, adr); +out: put_chip(map, chip, adr); spin_unlock(chip->mutex); - return 0; + return ret; } static int cfi_intelext_lock(struct mtd_info *mtd, loff_t ofs, size_t len) @@ -2445,28 +2343,8 @@ static void cfi_intelext_destroy(struct kfree(mtd->eraseregions); } -static char im_name_0001[] = "cfi_cmdset_0001"; -static char im_name_0003[] = "cfi_cmdset_0003"; -static char im_name_0200[] = "cfi_cmdset_0200"; - -static int __init cfi_intelext_init(void) -{ - inter_module_register(im_name_0001, THIS_MODULE, &cfi_cmdset_0001); - inter_module_register(im_name_0003, THIS_MODULE, &cfi_cmdset_0001); - inter_module_register(im_name_0200, THIS_MODULE, &cfi_cmdset_0001); - return 0; -} - -static void __exit cfi_intelext_exit(void) -{ - inter_module_unregister(im_name_0001); - inter_module_unregister(im_name_0003); - inter_module_unregister(im_name_0200); -} - -module_init(cfi_intelext_init); -module_exit(cfi_intelext_exit); - MODULE_LICENSE("GPL"); MODULE_AUTHOR("David Woodhouse et al."); MODULE_DESCRIPTION("MTD chip driver for Intel/Sharp flash chips"); +MODULE_ALIAS("cfi_cmdset_0003"); +MODULE_ALIAS("cfi_cmdset_0200"); diff -puN drivers/mtd/chips/cfi_cmdset_0002.c~git-mtd drivers/mtd/chips/cfi_cmdset_0002.c --- devel/drivers/mtd/chips/cfi_cmdset_0002.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/chips/cfi_cmdset_0002.c 2006-05-29 15:02:34.000000000 -0700 @@ -326,7 +326,7 @@ struct mtd_info *cfi_cmdset_0002(struct return cfi_amdstd_setup(mtd); } - +EXPORT_SYMBOL_GPL(cfi_cmdset_0002); static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd) { @@ -1758,25 +1758,6 @@ static void cfi_amdstd_destroy(struct mt kfree(mtd->eraseregions); } -static char im_name[]="cfi_cmdset_0002"; - - -static int __init cfi_amdstd_init(void) -{ - inter_module_register(im_name, THIS_MODULE, &cfi_cmdset_0002); - return 0; -} - - -static void __exit cfi_amdstd_exit(void) -{ - inter_module_unregister(im_name); -} - - -module_init(cfi_amdstd_init); -module_exit(cfi_amdstd_exit); - MODULE_LICENSE("GPL"); MODULE_AUTHOR("Crossnet Co. et al."); MODULE_DESCRIPTION("MTD chip driver for AMD/Fujitsu flash chips"); diff -puN drivers/mtd/chips/cfi_cmdset_0020.c~git-mtd drivers/mtd/chips/cfi_cmdset_0020.c --- devel/drivers/mtd/chips/cfi_cmdset_0020.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/chips/cfi_cmdset_0020.c 2006-05-29 15:02:34.000000000 -0700 @@ -162,6 +162,7 @@ struct mtd_info *cfi_cmdset_0020(struct return cfi_staa_setup(map); } +EXPORT_SYMBOL_GPL(cfi_cmdset_0020); static struct mtd_info *cfi_staa_setup(struct map_info *map) { @@ -237,9 +238,8 @@ static struct mtd_info *cfi_staa_setup(s mtd->unlock = cfi_staa_unlock; mtd->suspend = cfi_staa_suspend; mtd->resume = cfi_staa_resume; - mtd->flags = MTD_CAP_NORFLASH; - mtd->flags |= MTD_ECC; /* FIXME: Not all STMicro flashes have this */ - mtd->eccsize = 8; /* FIXME: Should be 0 for STMicro flashes w/out ECC */ + mtd->flags = MTD_CAP_NORFLASH & ~MTD_BIT_WRITEABLE; + mtd->writesize = 8; /* FIXME: Should be 0 for STMicro flashes w/out ECC */ map->fldrv = &cfi_staa_chipdrv; __module_get(THIS_MODULE); mtd->name = map->name; @@ -1410,20 +1410,4 @@ static void cfi_staa_destroy(struct mtd_ kfree(cfi); } -static char im_name[]="cfi_cmdset_0020"; - -static int __init cfi_staa_init(void) -{ - inter_module_register(im_name, THIS_MODULE, &cfi_cmdset_0020); - return 0; -} - -static void __exit cfi_staa_exit(void) -{ - inter_module_unregister(im_name); -} - -module_init(cfi_staa_init); -module_exit(cfi_staa_exit); - MODULE_LICENSE("GPL"); diff -puN drivers/mtd/chips/cfi_probe.c~git-mtd drivers/mtd/chips/cfi_probe.c --- devel/drivers/mtd/chips/cfi_probe.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/chips/cfi_probe.c 2006-05-29 15:02:34.000000000 -0700 @@ -349,12 +349,12 @@ static void print_cfi_ident(struct cfi_i else printk("No Vpp line\n"); - printk("Typical byte/word write timeout: %d µs\n", 1<WordWriteTimeoutTyp); - printk("Maximum byte/word write timeout: %d µs\n", (1<WordWriteTimeoutMax) * (1<WordWriteTimeoutTyp)); + printk("Typical byte/word write timeout: %d µs\n", 1<WordWriteTimeoutTyp); + printk("Maximum byte/word write timeout: %d µs\n", (1<WordWriteTimeoutMax) * (1<WordWriteTimeoutTyp)); if (cfip->BufWriteTimeoutTyp || cfip->BufWriteTimeoutMax) { - printk("Typical full buffer write timeout: %d µs\n", 1<BufWriteTimeoutTyp); - printk("Maximum full buffer write timeout: %d µs\n", (1<BufWriteTimeoutMax) * (1<BufWriteTimeoutTyp)); + printk("Typical full buffer write timeout: %d µs\n", 1<BufWriteTimeoutTyp); + printk("Maximum full buffer write timeout: %d µs\n", (1<BufWriteTimeoutMax) * (1<BufWriteTimeoutTyp)); } else printk("Full buffer write not supported\n"); diff -puN drivers/mtd/chips/gen_probe.c~git-mtd drivers/mtd/chips/gen_probe.c --- devel/drivers/mtd/chips/gen_probe.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/chips/gen_probe.c 2006-05-29 15:02:34.000000000 -0700 @@ -37,8 +37,15 @@ struct mtd_info *mtd_do_chip_probe(struc if (!mtd) mtd = check_cmd_set(map, 0); /* Then the secondary */ - if (mtd) + if (mtd) { + if (mtd->size > map->size) { + printk(KERN_WARNING "Reducing visibility of %ldKiB chip to %ldKiB\n", + (unsigned long)mtd->size >> 10, + (unsigned long)map->size >> 10); + mtd->size = map->size; + } return mtd; + } printk(KERN_WARNING"gen_probe: No supported Vendor Command Set found\n"); @@ -100,7 +107,12 @@ static struct cfi_private *genprobe_iden * Align bitmap storage size to full byte. */ max_chips = map->size >> cfi.chipshift; - mapsize = (max_chips / 8) + ((max_chips % 8) ? 1 : 0); + if (!max_chips) { + printk(KERN_WARNING "NOR chip too large to fit in mapping. Attempting to cope...\n"); + max_chips = 1; + } + + mapsize = (max_chips + BITS_PER_LONG-1) / BITS_PER_LONG; chip_map = kmalloc(mapsize, GFP_KERNEL); if (!chip_map) { printk(KERN_WARNING "%s: kmalloc failed for CFI chip map\n", map->name); @@ -194,25 +206,28 @@ static inline struct mtd_info *cfi_cmdse { struct cfi_private *cfi = map->fldrv_priv; __u16 type = primary?cfi->cfiq->P_ID:cfi->cfiq->A_ID; -#if defined(CONFIG_MODULES) && defined(HAVE_INTER_MODULE) - char probename[32]; +#ifdef CONFIG_MODULES + char probename[16+sizeof(MODULE_SYMBOL_PREFIX)]; cfi_cmdset_fn_t *probe_function; - sprintf(probename, "cfi_cmdset_%4.4X", type); + sprintf(probename, MODULE_SYMBOL_PREFIX "cfi_cmdset_%4.4X", type); - probe_function = inter_module_get_request(probename, probename); + probe_function = __symbol_get(probename); + if (!probe_function) { + request_module(probename + sizeof(MODULE_SYMBOL_PREFIX) - 1); + probe_function = __symbol_get(probename); + } if (probe_function) { struct mtd_info *mtd; mtd = (*probe_function)(map, primary); /* If it was happy, it'll have increased its own use count */ - inter_module_put(probename); + symbol_put_addr(probe_function); return mtd; } #endif - printk(KERN_NOTICE "Support for command set %04X not present\n", - type); + printk(KERN_NOTICE "Support for command set %04X not present\n", type); return NULL; } @@ -226,12 +241,8 @@ static struct mtd_info *check_cmd_set(st return NULL; switch(type){ - /* Urgh. Ifdefs. The version with weak symbols was - * _much_ nicer. Shame it didn't seem to work on - * anything but x86, really. - * But we can't rely in inter_module_get() because - * that'd mean we depend on link order. - */ + /* We need these for the !CONFIG_MODULES case, + because symbol_get() doesn't work there */ #ifdef CONFIG_MTD_CFI_INTELEXT case 0x0001: case 0x0003: @@ -246,9 +257,9 @@ static struct mtd_info *check_cmd_set(st case 0x0020: return cfi_cmdset_0020(map, primary); #endif + default: + return cfi_cmdset_unknown(map, primary); } - - return cfi_cmdset_unknown(map, primary); } MODULE_LICENSE("GPL"); diff -puN drivers/mtd/chips/Kconfig~git-mtd drivers/mtd/chips/Kconfig --- devel/drivers/mtd/chips/Kconfig~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/chips/Kconfig 2006-05-29 15:02:34.000000000 -0700 @@ -30,7 +30,6 @@ config MTD_JEDECPROBE config MTD_GEN_PROBE tristate - select OBSOLETE_INTERMODULE config MTD_CFI_ADV_OPTIONS bool "Flash chip driver advanced configuration options" diff -puN drivers/mtd/chips/Makefile~git-mtd drivers/mtd/chips/Makefile --- devel/drivers/mtd/chips/Makefile~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/chips/Makefile 2006-05-29 15:02:34.000000000 -0700 @@ -3,13 +3,6 @@ # # $Id: Makefile.common,v 1.5 2005/11/07 11:14:22 gleixner Exp $ -# *** BIG UGLY NOTE *** -# -# The removal of get_module_symbol() and replacement with -# inter_module_register() et al has introduced a link order dependency -# here where previously there was none. We now have to ensure that -# the CFI command set drivers are linked before gen_probe.o - obj-$(CONFIG_MTD) += chipreg.o obj-$(CONFIG_MTD_AMDSTD) += amd_flash.o obj-$(CONFIG_MTD_CFI) += cfi_probe.o diff -puN drivers/mtd/chips/map_ram.c~git-mtd drivers/mtd/chips/map_ram.c --- devel/drivers/mtd/chips/map_ram.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/chips/map_ram.c 2006-05-29 15:02:34.000000000 -0700 @@ -70,7 +70,7 @@ static struct mtd_info *map_ram_probe(st mtd->read = mapram_read; mtd->write = mapram_write; mtd->sync = mapram_nop; - mtd->flags = MTD_CAP_RAM | MTD_VOLATILE; + mtd->flags = MTD_CAP_RAM; mtd->erasesize = PAGE_SIZE; while(mtd->size & (mtd->erasesize - 1)) diff -puN drivers/mtd/devices/block2mtd.c~git-mtd drivers/mtd/devices/block2mtd.c --- devel/drivers/mtd/devices/block2mtd.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/devices/block2mtd.c 2006-05-29 15:02:34.000000000 -0700 @@ -4,7 +4,7 @@ * block2mtd.c - create an mtd from a block device * * Copyright (C) 2001,2002 Simon Evans - * Copyright (C) 2004,2005 Jörn Engel + * Copyright (C) 2004-2006 Jörn Engel * * Licence: GPL */ @@ -331,7 +331,6 @@ static struct block2mtd_dev *add_device( dev->mtd.writev = default_mtd_writev; dev->mtd.sync = block2mtd_sync; dev->mtd.read = block2mtd_read; - dev->mtd.readv = default_mtd_readv; dev->mtd.priv = dev; dev->mtd.owner = THIS_MODULE; @@ -351,6 +350,12 @@ devinit_err: } +/* This function works similar to reguler strtoul. In addition, it + * allows some suffixes for a more human-readable number format: + * ki, Ki, kiB, KiB - multiply result with 1024 + * Mi, MiB - multiply result with 1024^2 + * Gi, GiB - multiply result with 1024^3 + */ static int ustrtoul(const char *cp, char **endp, unsigned int base) { unsigned long result = simple_strtoul(cp, endp, base); @@ -359,11 +364,16 @@ static int ustrtoul(const char *cp, char result *= 1024; case 'M': result *= 1024; + case 'K': case 'k': result *= 1024; /* By dwmw2 editorial decree, "ki", "Mi" or "Gi" are to be used. */ - if ((*endp)[1] == 'i') - (*endp) += 2; + if ((*endp)[1] == 'i') { + if ((*endp)[2] == 'B') + (*endp) += 3; + else + (*endp) += 2; + } } return result; } @@ -418,7 +428,8 @@ static inline void kill_final_newline(ch static int block2mtd_setup(const char *val, struct kernel_param *kp) { - char buf[80+12], *str=buf; /* 80 for device, 12 for erase size */ + char buf[80+12]; /* 80 for device, 12 for erase size */ + char *str = buf; char *token[2]; char *name; size_t erase_size = PAGE_SIZE; @@ -430,7 +441,7 @@ static int block2mtd_setup(const char *v strcpy(str, val); kill_final_newline(str); - for (i=0; i<2; i++) + for (i = 0; i < 2; i++) token[i] = strsep(&str, ","); if (str) @@ -449,8 +460,10 @@ static int block2mtd_setup(const char *v if (token[1]) { ret = parse_num(&erase_size, token[1]); - if (ret) + if (ret) { + kfree(name); parse_err("illegal erase size"); + } } add_device(name, erase_size); diff -puN drivers/mtd/devices/doc2000.c~git-mtd drivers/mtd/devices/doc2000.c --- devel/drivers/mtd/devices/doc2000.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/devices/doc2000.c 2006-05-29 15:02:34.000000000 -0700 @@ -59,13 +59,10 @@ static int doc_read_ecc(struct mtd_info size_t *retlen, u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel); static int doc_write_ecc(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel); -static int doc_writev_ecc(struct mtd_info *mtd, const struct kvec *vecs, - unsigned long count, loff_t to, size_t *retlen, - u_char *eccbuf, struct nand_oobinfo *oobsel); -static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, size_t len, - size_t *retlen, u_char *buf); -static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len, - size_t *retlen, const u_char *buf); +static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, + struct mtd_oob_ops *ops); +static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, + struct mtd_oob_ops *ops); static int doc_write_oob_nolock(struct mtd_info *mtd, loff_t ofs, size_t len, size_t *retlen, const u_char *buf); static int doc_erase (struct mtd_info *mtd, struct erase_info *instr); @@ -517,16 +514,9 @@ static int DoC2k_is_alias(struct DiskOnC return retval; } -static const char im_name[] = "DoC2k_init"; - -/* This routine is made available to other mtd code via - * inter_module_register. It must only be accessed through - * inter_module_get which will bump the use count of this module. The - * addresses passed back in mtd are valid as long as the use count of - * this module is non-zero, i.e. between inter_module_get and - * inter_module_put. Keith Owens 29 Oct 2000. - */ -static void DoC2k_init(struct mtd_info *mtd) +/* This routine is found from the docprobe code by symbol_get(), + * which will bump the use count of this module. */ +void DoC2k_init(struct mtd_info *mtd) { struct DiskOnChip *this = mtd->priv; struct DiskOnChip *old = NULL; @@ -586,7 +576,7 @@ static void DoC2k_init(struct mtd_info * mtd->ecctype = MTD_ECC_RS_DiskOnChip; mtd->size = 0; mtd->erasesize = 0; - mtd->oobblock = 512; + mtd->writesize = 512; mtd->oobsize = 16; mtd->owner = THIS_MODULE; mtd->erase = doc_erase; @@ -594,9 +584,6 @@ static void DoC2k_init(struct mtd_info * mtd->unpoint = NULL; mtd->read = doc_read; mtd->write = doc_write; - mtd->read_ecc = doc_read_ecc; - mtd->write_ecc = doc_write_ecc; - mtd->writev_ecc = doc_writev_ecc; mtd->read_oob = doc_read_oob; mtd->write_oob = doc_write_oob; mtd->sync = NULL; @@ -623,6 +610,7 @@ static void DoC2k_init(struct mtd_info * return; } } +EXPORT_SYMBOL_GPL(DoC2k_init); static int doc_read(struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf) @@ -971,72 +959,18 @@ static int doc_write_ecc(struct mtd_info return 0; } -static int doc_writev_ecc(struct mtd_info *mtd, const struct kvec *vecs, - unsigned long count, loff_t to, size_t *retlen, - u_char *eccbuf, struct nand_oobinfo *oobsel) -{ - static char static_buf[512]; - static DEFINE_MUTEX(writev_buf_mutex); - - size_t totretlen = 0; - size_t thisvecofs = 0; - int ret= 0; - - mutex_lock(&writev_buf_mutex); - - while(count) { - size_t thislen, thisretlen; - unsigned char *buf; - - buf = vecs->iov_base + thisvecofs; - thislen = vecs->iov_len - thisvecofs; - - - if (thislen >= 512) { - thislen = thislen & ~(512-1); - thisvecofs += thislen; - } else { - /* Not enough to fill a page. Copy into buf */ - memcpy(static_buf, buf, thislen); - buf = &static_buf[thislen]; - - while(count && thislen < 512) { - vecs++; - count--; - thisvecofs = min((512-thislen), vecs->iov_len); - memcpy(buf, vecs->iov_base, thisvecofs); - thislen += thisvecofs; - buf += thisvecofs; - } - buf = static_buf; - } - if (count && thisvecofs == vecs->iov_len) { - thisvecofs = 0; - vecs++; - count--; - } - ret = doc_write_ecc(mtd, to, thislen, &thisretlen, buf, eccbuf, oobsel); - - totretlen += thisretlen; - - if (ret || thisretlen != thislen) - break; - - to += thislen; - } - - mutex_unlock(&writev_buf_mutex); - *retlen = totretlen; - return ret; -} - - -static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, size_t len, - size_t * retlen, u_char * buf) +static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, + struct mtd_oob_ops *ops) { struct DiskOnChip *this = mtd->priv; int len256 = 0, ret; struct Nand *mychip; + uint8_t *buf = ops->oobbuf; + size_t len = ops->len; + + BUG_ON(ops->mode != MTD_OOB_PLACE); + + ofs += ops->ooboffs; mutex_lock(&this->lock); @@ -1077,7 +1011,7 @@ static int doc_read_oob(struct mtd_info DoC_ReadBuf(this, &buf[len256], len - len256); - *retlen = len; + ops->retlen = len; /* Reading the full OOB data drops us off of the end of the page, * causing the flash device to go into busy mode, so we need * to wait until ready 11.4.1 and Toshiba TC58256FT docs */ @@ -1192,17 +1126,20 @@ static int doc_write_oob_nolock(struct m } -static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len, - size_t * retlen, const u_char * buf) +static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, + struct mtd_oob_ops *ops) { - struct DiskOnChip *this = mtd->priv; - int ret; + struct DiskOnChip *this = mtd->priv; + int ret; - mutex_lock(&this->lock); - ret = doc_write_oob_nolock(mtd, ofs, len, retlen, buf); + BUG_ON(ops->mode != MTD_OOB_PLACE); + + mutex_lock(&this->lock); + ret = doc_write_oob_nolock(mtd, ofs + ops->ooboffs, ops->len, + &ops->retlen, ops->oobbuf); - mutex_unlock(&this->lock); - return ret; + mutex_unlock(&this->lock); + return ret; } static int doc_erase(struct mtd_info *mtd, struct erase_info *instr) @@ -1277,12 +1214,6 @@ static int doc_erase(struct mtd_info *mt * ****************************************************************************/ -static int __init init_doc2000(void) -{ - inter_module_register(im_name, THIS_MODULE, &DoC2k_init); - return 0; -} - static void __exit cleanup_doc2000(void) { struct mtd_info *mtd; @@ -1298,11 +1229,9 @@ static void __exit cleanup_doc2000(void) kfree(this->chips); kfree(mtd); } - inter_module_unregister(im_name); } module_exit(cleanup_doc2000); -module_init(init_doc2000); MODULE_LICENSE("GPL"); MODULE_AUTHOR("David Woodhouse et al."); diff -puN drivers/mtd/devices/doc2001.c~git-mtd drivers/mtd/devices/doc2001.c --- devel/drivers/mtd/devices/doc2001.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/devices/doc2001.c 2006-05-29 15:02:34.000000000 -0700 @@ -43,10 +43,10 @@ static int doc_read_ecc(struct mtd_info static int doc_write_ecc(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel); -static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, size_t len, - size_t *retlen, u_char *buf); -static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len, - size_t *retlen, const u_char *buf); +static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, + struct mtd_oob_ops *ops); +static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, + struct mtd_oob_ops *ops); static int doc_erase (struct mtd_info *mtd, struct erase_info *instr); static struct mtd_info *docmillist = NULL; @@ -324,16 +324,9 @@ static int DoCMil_is_alias(struct DiskOn return retval; } -static const char im_name[] = "DoCMil_init"; - -/* This routine is made available to other mtd code via - * inter_module_register. It must only be accessed through - * inter_module_get which will bump the use count of this module. The - * addresses passed back in mtd are valid as long as the use count of - * this module is non-zero, i.e. between inter_module_get and - * inter_module_put. Keith Owens 29 Oct 2000. - */ -static void DoCMil_init(struct mtd_info *mtd) +/* This routine is found from the docprobe code by symbol_get(), + * which will bump the use count of this module. */ +void DoCMil_init(struct mtd_info *mtd) { struct DiskOnChip *this = mtd->priv; struct DiskOnChip *old = NULL; @@ -368,7 +361,7 @@ static void DoCMil_init(struct mtd_info /* FIXME: erase size is not always 8KiB */ mtd->erasesize = 0x2000; - mtd->oobblock = 512; + mtd->writesize = 512; mtd->oobsize = 16; mtd->owner = THIS_MODULE; mtd->erase = doc_erase; @@ -376,8 +369,6 @@ static void DoCMil_init(struct mtd_info mtd->unpoint = NULL; mtd->read = doc_read; mtd->write = doc_write; - mtd->read_ecc = doc_read_ecc; - mtd->write_ecc = doc_write_ecc; mtd->read_oob = doc_read_oob; mtd->write_oob = doc_write_oob; mtd->sync = NULL; @@ -401,6 +392,7 @@ static void DoCMil_init(struct mtd_info return; } } +EXPORT_SYMBOL_GPL(DoCMil_init); static int doc_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) @@ -670,8 +662,8 @@ static int doc_write_ecc (struct mtd_inf return ret; } -static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, size_t len, - size_t *retlen, u_char *buf) +static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, + struct mtd_oob_ops *ops) { #ifndef USE_MEMCPY int i; @@ -680,6 +672,12 @@ static int doc_read_oob(struct mtd_info struct DiskOnChip *this = mtd->priv; void __iomem *docptr = this->virtadr; struct Nand *mychip = &this->chips[ofs >> this->chipshift]; + uint8_t *buf = ops->oobbuf; + size_t len = ops->len; + + BUG_ON(ops->mode != MTD_OOB_PLACE); + + ofs += ops->ooboffs; /* Find the chip which is to be used and select it */ if (this->curfloor != mychip->floor) { @@ -716,13 +714,13 @@ static int doc_read_oob(struct mtd_info #endif buf[len - 1] = ReadDOC(docptr, LastDataRead); - *retlen = len; + ops->retlen = len; return 0; } -static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len, - size_t *retlen, const u_char *buf) +static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, + struct mtd_oob_ops *ops) { #ifndef USE_MEMCPY int i; @@ -732,6 +730,12 @@ static int doc_write_oob(struct mtd_info struct DiskOnChip *this = mtd->priv; void __iomem *docptr = this->virtadr; struct Nand *mychip = &this->chips[ofs >> this->chipshift]; + uint8_t *buf = ops->oobbuf; + size_t len = ops->len; + + BUG_ON(ops->mode != MTD_OOB_PLACE); + + ofs += ops->ooboffs; /* Find the chip which is to be used and select it */ if (this->curfloor != mychip->floor) { @@ -783,12 +787,12 @@ static int doc_write_oob(struct mtd_info if (ReadDOC(docptr, Mil_CDSN_IO) & 1) { printk("Error programming oob data\n"); /* FIXME: implement Bad Block Replacement (in nftl.c ??) */ - *retlen = 0; + ops->retlen = 0; ret = -EIO; } dummy = ReadDOC(docptr, LastDataRead); - *retlen = len; + ops->retlen = len; return ret; } @@ -856,12 +860,6 @@ int doc_erase (struct mtd_info *mtd, str * ****************************************************************************/ -static int __init init_doc2001(void) -{ - inter_module_register(im_name, THIS_MODULE, &DoCMil_init); - return 0; -} - static void __exit cleanup_doc2001(void) { struct mtd_info *mtd; @@ -877,11 +875,9 @@ static void __exit cleanup_doc2001(void) kfree(this->chips); kfree(mtd); } - inter_module_unregister(im_name); } module_exit(cleanup_doc2001); -module_init(init_doc2001); MODULE_LICENSE("GPL"); MODULE_AUTHOR("David Woodhouse et al."); diff -puN drivers/mtd/devices/doc2001plus.c~git-mtd drivers/mtd/devices/doc2001plus.c --- devel/drivers/mtd/devices/doc2001plus.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/devices/doc2001plus.c 2006-05-29 15:02:34.000000000 -0700 @@ -47,10 +47,10 @@ static int doc_read_ecc(struct mtd_info static int doc_write_ecc(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel); -static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, size_t len, - size_t *retlen, u_char *buf); -static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len, - size_t *retlen, const u_char *buf); +static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, + struct mtd_oob_ops *ops); +static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, + struct mtd_oob_ops *ops); static int doc_erase (struct mtd_info *mtd, struct erase_info *instr); static struct mtd_info *docmilpluslist = NULL; @@ -447,16 +447,9 @@ static int DoCMilPlus_is_alias(struct Di return retval; } -static const char im_name[] = "DoCMilPlus_init"; - -/* This routine is made available to other mtd code via - * inter_module_register. It must only be accessed through - * inter_module_get which will bump the use count of this module. The - * addresses passed back in mtd are valid as long as the use count of - * this module is non-zero, i.e. between inter_module_get and - * inter_module_put. Keith Owens 29 Oct 2000. - */ -static void DoCMilPlus_init(struct mtd_info *mtd) +/* This routine is found from the docprobe code by symbol_get(), + * which will bump the use count of this module. */ +void DoCMilPlus_init(struct mtd_info *mtd) { struct DiskOnChip *this = mtd->priv; struct DiskOnChip *old = NULL; @@ -490,7 +483,7 @@ static void DoCMilPlus_init(struct mtd_i mtd->size = 0; mtd->erasesize = 0; - mtd->oobblock = 512; + mtd->writesize = 512; mtd->oobsize = 16; mtd->owner = THIS_MODULE; mtd->erase = doc_erase; @@ -498,8 +491,6 @@ static void DoCMilPlus_init(struct mtd_i mtd->unpoint = NULL; mtd->read = doc_read; mtd->write = doc_write; - mtd->read_ecc = doc_read_ecc; - mtd->write_ecc = doc_write_ecc; mtd->read_oob = doc_read_oob; mtd->write_oob = doc_write_oob; mtd->sync = NULL; @@ -524,6 +515,7 @@ static void DoCMilPlus_init(struct mtd_i return; } } +EXPORT_SYMBOL_GPL(DoCMilPlus_init); #if 0 static int doc_dumpblk(struct mtd_info *mtd, loff_t from) @@ -876,14 +868,20 @@ static int doc_write_ecc(struct mtd_info return ret; } -static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, size_t len, - size_t *retlen, u_char *buf) +static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, + struct mtd_oob_ops *ops) { loff_t fofs, base; struct DiskOnChip *this = mtd->priv; void __iomem * docptr = this->virtadr; struct Nand *mychip = &this->chips[ofs >> this->chipshift]; size_t i, size, got, want; + uint8_t *buf = ops->oobbuf; + size_t len = ops->len; + + BUG_ON(ops->mode != MTD_OOB_PLACE); + + ofs += ops->ooboffs; DoC_CheckASIC(docptr); @@ -949,12 +947,12 @@ static int doc_read_oob(struct mtd_info /* Disable flash internally */ WriteDOC(0, docptr, Mplus_FlashSelect); - *retlen = len; + ops->retlen = len; return 0; } -static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len, - size_t *retlen, const u_char *buf) +static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, + struct mtd_oob_ops *ops) { volatile char dummy; loff_t fofs, base; @@ -963,6 +961,12 @@ static int doc_write_oob(struct mtd_info struct Nand *mychip = &this->chips[ofs >> this->chipshift]; size_t i, size, got, want; int ret = 0; + uint8_t *buf = ops->oobbuf; + size_t len = ops->len; + + BUG_ON(ops->mode != MTD_OOB_PLACE); + + ofs += ops->ooboffs; DoC_CheckASIC(docptr); @@ -1038,7 +1042,7 @@ static int doc_write_oob(struct mtd_info printk("MTD: Error 0x%x programming oob at 0x%x\n", dummy, (int)ofs); /* FIXME: implement Bad Block Replacement */ - *retlen = 0; + ops->retlen = 0; ret = -EIO; } dummy = ReadDOC(docptr, Mplus_LastDataRead); @@ -1051,7 +1055,7 @@ static int doc_write_oob(struct mtd_info /* Disable flash internally */ WriteDOC(0, docptr, Mplus_FlashSelect); - *retlen = len; + ops->retlen = len; return ret; } @@ -1122,12 +1126,6 @@ int doc_erase(struct mtd_info *mtd, stru * ****************************************************************************/ -static int __init init_doc2001plus(void) -{ - inter_module_register(im_name, THIS_MODULE, &DoCMilPlus_init); - return 0; -} - static void __exit cleanup_doc2001plus(void) { struct mtd_info *mtd; @@ -1143,11 +1141,9 @@ static void __exit cleanup_doc2001plus(v kfree(this->chips); kfree(mtd); } - inter_module_unregister(im_name); } module_exit(cleanup_doc2001plus); -module_init(init_doc2001plus); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Greg Ungerer et al."); diff -puN drivers/mtd/devices/docprobe.c~git-mtd drivers/mtd/devices/docprobe.c --- devel/drivers/mtd/devices/docprobe.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/devices/docprobe.c 2006-05-29 15:02:34.000000000 -0700 @@ -231,6 +231,10 @@ static inline int __init doccheck(void _ static int docfound; +extern void DoC2k_init(struct mtd_info *); +extern void DoCMil_init(struct mtd_info *); +extern void DoCMilPlus_init(struct mtd_info *); + static void __init DoC_Probe(unsigned long physadr) { void __iomem *docptr; @@ -239,8 +243,6 @@ static void __init DoC_Probe(unsigned lo int ChipID; char namebuf[15]; char *name = namebuf; - char *im_funcname = NULL; - char *im_modname = NULL; void (*initroutine)(struct mtd_info *) = NULL; docptr = ioremap(physadr, DOC_IOREMAP_LEN); @@ -278,41 +280,33 @@ static void __init DoC_Probe(unsigned lo switch(ChipID) { case DOC_ChipID_Doc2kTSOP: name="2000 TSOP"; - im_funcname = "DoC2k_init"; - im_modname = "doc2000"; + initroutine = symbol_request(DoC2k_init); break; case DOC_ChipID_Doc2k: name="2000"; - im_funcname = "DoC2k_init"; - im_modname = "doc2000"; + initroutine = symbol_request(DoC2k_init); break; case DOC_ChipID_DocMil: name="Millennium"; #ifdef DOC_SINGLE_DRIVER - im_funcname = "DoC2k_init"; - im_modname = "doc2000"; + initroutine = symbol_request(DoC2k_init); #else - im_funcname = "DoCMil_init"; - im_modname = "doc2001"; + initroutine = symbol_request(DoCMil_init); #endif /* DOC_SINGLE_DRIVER */ break; case DOC_ChipID_DocMilPlus16: case DOC_ChipID_DocMilPlus32: name="MillenniumPlus"; - im_funcname = "DoCMilPlus_init"; - im_modname = "doc2001plus"; + initroutine = symbol_request(DoCMilPlus_init); break; } - if (im_funcname) - initroutine = inter_module_get_request(im_funcname, im_modname); - if (initroutine) { (*initroutine)(mtd); - inter_module_put(im_funcname); + symbol_put_addr(initroutine); return; } printk(KERN_NOTICE "Cannot find driver for DiskOnChip %s at 0x%lX\n", name, physadr); diff -puN drivers/mtd/devices/Kconfig~git-mtd drivers/mtd/devices/Kconfig --- devel/drivers/mtd/devices/Kconfig~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/devices/Kconfig 2006-05-29 15:02:34.000000000 -0700 @@ -47,6 +47,11 @@ config MTD_MS02NV accelerator. Say Y here if you have a DECstation 5000/2x0 or a DECsystem 5900 equipped with such a module. + If you want to compile this driver as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read . The module will + be called ms02-nv.o. + config MTD_DATAFLASH tristate "Support for AT45xxx DataFlash" depends on MTD && SPI_MASTER && EXPERIMENTAL @@ -209,7 +214,6 @@ config MTD_DOC2001PLUS config MTD_DOCPROBE tristate select MTD_DOCECC - select OBSOLETE_INTERMODULE config MTD_DOCECC tristate diff -puN drivers/mtd/devices/Makefile~git-mtd drivers/mtd/devices/Makefile --- devel/drivers/mtd/devices/Makefile~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/devices/Makefile 2006-05-29 15:02:34.000000000 -0700 @@ -3,13 +3,6 @@ # # $Id: Makefile.common,v 1.7 2004/12/22 17:51:15 joern Exp $ -# *** BIG UGLY NOTE *** -# -# The removal of get_module_symbol() and replacement with -# inter_module_register() et al has introduced a link order dependency -# here where previously there was none. We now have to ensure that -# doc200[01].o are linked before docprobe.o - obj-$(CONFIG_MTD_DOC2000) += doc2000.o obj-$(CONFIG_MTD_DOC2001) += doc2001.o obj-$(CONFIG_MTD_DOC2001PLUS) += doc2001plus.o diff -puN drivers/mtd/devices/phram.c~git-mtd drivers/mtd/devices/phram.c --- devel/drivers/mtd/devices/phram.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/devices/phram.c 2006-05-29 15:02:34.000000000 -0700 @@ -1,8 +1,8 @@ /** * $Id: phram.c,v 1.16 2005/11/07 11:14:25 gleixner Exp $ * - * Copyright (c) ???? Jochen Schäuble - * Copyright (c) 2003-2004 Jörn Engel + * Copyright (c) ???? Jochen Schäuble + * Copyright (c) 2003-2004 Jörn Engel * * Usage: * @@ -142,7 +142,7 @@ static int register_device(char *name, u new->mtd.name = name; new->mtd.size = len; - new->mtd.flags = MTD_CAP_RAM | MTD_ERASEABLE | MTD_VOLATILE; + new->mtd.flags = MTD_CAP_RAM; new->mtd.erase = phram_erase; new->mtd.point = phram_point; new->mtd.unpoint = phram_unpoint; @@ -266,12 +266,16 @@ static int phram_setup(const char *val, return 0; ret = parse_num32(&start, token[1]); - if (ret) + if (ret) { + kfree(name); parse_err("illegal start address\n"); + } ret = parse_num32(&len, token[2]); - if (ret) + if (ret) { + kfree(name); parse_err("illegal device length\n"); + } register_device(name, start, len); @@ -296,5 +300,5 @@ module_init(init_phram); module_exit(cleanup_phram); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Jörn Engel "); +MODULE_AUTHOR("Jörn Engel "); MODULE_DESCRIPTION("MTD driver for physical RAM"); diff -puN drivers/mtd/devices/slram.c~git-mtd drivers/mtd/devices/slram.c --- devel/drivers/mtd/devices/slram.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/devices/slram.c 2006-05-29 15:02:34.000000000 -0700 @@ -200,8 +200,7 @@ static int register_device(char *name, u (*curmtd)->mtdinfo->name = name; (*curmtd)->mtdinfo->size = length; - (*curmtd)->mtdinfo->flags = MTD_CLEAR_BITS | MTD_SET_BITS | - MTD_WRITEB_WRITEABLE | MTD_VOLATILE | MTD_CAP_RAM; + (*curmtd)->mtdinfo->flags = MTD_CAP_RAM; (*curmtd)->mtdinfo->erase = slram_erase; (*curmtd)->mtdinfo->point = slram_point; (*curmtd)->mtdinfo->unpoint = slram_unpoint; diff -puN drivers/mtd/inftlcore.c~git-mtd drivers/mtd/inftlcore.c --- devel/drivers/mtd/inftlcore.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/inftlcore.c 2006-05-29 15:02:34.000000000 -0700 @@ -36,6 +36,7 @@ #include #include #include +#include #include #include #include @@ -79,14 +80,12 @@ static void inftl_add_mtd(struct mtd_blk inftl->mbd.devnum = -1; inftl->mbd.blksize = 512; inftl->mbd.tr = tr; - memcpy(&inftl->oobinfo, &mtd->oobinfo, sizeof(struct nand_oobinfo)); - inftl->oobinfo.useecc = MTD_NANDECC_PLACEONLY; - if (INFTL_mount(inftl) < 0) { + if (INFTL_mount(inftl) < 0) { printk(KERN_WARNING "INFTL: could not mount device\n"); kfree(inftl); return; - } + } /* OK, it's a new one. Set up all the data structures. */ @@ -152,6 +151,69 @@ static void inftl_remove_dev(struct mtd_ */ /* + * Read oob data from flash + */ +int inftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len, + size_t *retlen, uint8_t *buf) +{ + struct mtd_oob_ops ops; + int res; + + ops.mode = MTD_OOB_PLACE; + ops.ooboffs = offs & (mtd->writesize - 1); + ops.ooblen = len; + ops.oobbuf = buf; + ops.datbuf = NULL; + ops.len = len; + + res = mtd->read_oob(mtd, offs & ~(mtd->writesize - 1), &ops); + *retlen = ops.retlen; + return res; +} + +/* + * Write oob data to flash + */ +int inftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len, + size_t *retlen, uint8_t *buf) +{ + struct mtd_oob_ops ops; + int res; + + ops.mode = MTD_OOB_PLACE; + ops.ooboffs = offs & (mtd->writesize - 1); + ops.ooblen = len; + ops.oobbuf = buf; + ops.datbuf = NULL; + ops.len = len; + + res = mtd->write_oob(mtd, offs & ~(mtd->writesize - 1), &ops); + *retlen = ops.retlen; + return res; +} + +/* + * Write data and oob to flash + */ +static int inftl_write(struct mtd_info *mtd, loff_t offs, size_t len, + size_t *retlen, uint8_t *buf, uint8_t *oob) +{ + struct mtd_oob_ops ops; + int res; + + ops.mode = MTD_OOB_PLACE; + ops.ooboffs = offs; + ops.ooblen = mtd->oobsize; + ops.oobbuf = oob; + ops.datbuf = buf; + ops.len = len; + + res = mtd->write_oob(mtd, offs & ~(mtd->writesize - 1), &ops); + *retlen = ops.retlen; + return res; +} + +/* * INFTL_findfreeblock: Find a free Erase Unit on the INFTL partition. * This function is used when the give Virtual Unit Chain. */ @@ -198,10 +260,11 @@ static u16 INFTL_foldchain(struct INFTLr u16 BlockMap[MAX_SECTORS_PER_UNIT]; unsigned char BlockDeleted[MAX_SECTORS_PER_UNIT]; unsigned int thisEUN, prevEUN, status; + struct mtd_info *mtd = inftl->mbd.mtd; int block, silly; unsigned int targetEUN; struct inftl_oob oob; - size_t retlen; + size_t retlen; DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_foldchain(inftl=%p,thisVUC=%d," "pending=%d)\n", inftl, thisVUC, pendingblock); @@ -221,18 +284,18 @@ static u16 INFTL_foldchain(struct INFTLr * Scan to find the Erase Unit which holds the actual data for each * 512-byte block within the Chain. */ - silly = MAX_LOOPS; + silly = MAX_LOOPS; while (thisEUN < inftl->nb_blocks) { for (block = 0; block < inftl->EraseSize/SECTORSIZE; block ++) { if ((BlockMap[block] != 0xffff) || BlockDeleted[block]) continue; - if (MTD_READOOB(inftl->mbd.mtd, (thisEUN * inftl->EraseSize) - + (block * SECTORSIZE), 16 , &retlen, - (char *)&oob) < 0) + if (inftl_read_oob(mtd, (thisEUN * inftl->EraseSize) + + (block * SECTORSIZE), 16, &retlen, + (char *)&oob) < 0) status = SECTOR_IGNORE; else - status = oob.b.Status | oob.b.Status1; + status = oob.b.Status | oob.b.Status1; switch(status) { case SECTOR_FREE: @@ -282,29 +345,31 @@ static u16 INFTL_foldchain(struct INFTLr continue; } - /* + /* * Copy only in non free block (free blocks can only * happen in case of media errors or deleted blocks). */ - if (BlockMap[block] == BLOCK_NIL) - continue; + if (BlockMap[block] == BLOCK_NIL) + continue; - ret = MTD_READ(inftl->mbd.mtd, (inftl->EraseSize * - BlockMap[block]) + (block * SECTORSIZE), SECTORSIZE, - &retlen, movebuf); - if (ret < 0) { - ret = MTD_READ(inftl->mbd.mtd, (inftl->EraseSize * - BlockMap[block]) + (block * SECTORSIZE), - SECTORSIZE, &retlen, movebuf); + ret = mtd->read(mtd, (inftl->EraseSize * BlockMap[block]) + + (block * SECTORSIZE), SECTORSIZE, &retlen, + movebuf); + if (ret < 0 && ret != -EUCLEAN) { + ret = mtd->read(mtd, + (inftl->EraseSize * BlockMap[block]) + + (block * SECTORSIZE), SECTORSIZE, + &retlen, movebuf); if (ret != -EIO) - DEBUG(MTD_DEBUG_LEVEL1, "INFTL: error went " - "away on retry?\n"); - } - memset(&oob, 0xff, sizeof(struct inftl_oob)); - oob.b.Status = oob.b.Status1 = SECTOR_USED; - MTD_WRITEECC(inftl->mbd.mtd, (inftl->EraseSize * targetEUN) + - (block * SECTORSIZE), SECTORSIZE, &retlen, - movebuf, (char *)&oob, &inftl->oobinfo); + DEBUG(MTD_DEBUG_LEVEL1, "INFTL: error went " + "away on retry?\n"); + } + memset(&oob, 0xff, sizeof(struct inftl_oob)); + oob.b.Status = oob.b.Status1 = SECTOR_USED; + + inftl_write(inftl->mbd.mtd, (inftl->EraseSize * targetEUN) + + (block * SECTORSIZE), SECTORSIZE, &retlen, + movebuf, (char *)&oob); } /* @@ -329,17 +394,17 @@ static u16 INFTL_foldchain(struct INFTLr if (thisEUN == targetEUN) break; - if (INFTL_formatblock(inftl, thisEUN) < 0) { + if (INFTL_formatblock(inftl, thisEUN) < 0) { /* * Could not erase : mark block as reserved. */ inftl->PUtable[thisEUN] = BLOCK_RESERVED; - } else { + } else { /* Correctly erased : mark it as free */ inftl->PUtable[thisEUN] = BLOCK_FREE; inftl->PUtable[prevEUN] = BLOCK_NIL; inftl->numfreeEUNs++; - } + } } return targetEUN; @@ -415,6 +480,7 @@ static inline u16 INFTL_findwriteunit(st unsigned int thisVUC = block / (inftl->EraseSize / SECTORSIZE); unsigned int thisEUN, writeEUN, prev_block, status; unsigned long blockofs = (block * SECTORSIZE) & (inftl->EraseSize -1); + struct mtd_info *mtd = inftl->mbd.mtd; struct inftl_oob oob; struct inftl_bci bci; unsigned char anac, nacs, parity; @@ -434,10 +500,10 @@ static inline u16 INFTL_findwriteunit(st silly = MAX_LOOPS; while (thisEUN <= inftl->lastEUN) { - MTD_READOOB(inftl->mbd.mtd, (thisEUN * inftl->EraseSize) + - blockofs, 8, &retlen, (char *)&bci); + inftl_read_oob(mtd, (thisEUN * inftl->EraseSize) + + blockofs, 8, &retlen, (char *)&bci); - status = bci.Status | bci.Status1; + status = bci.Status | bci.Status1; DEBUG(MTD_DEBUG_LEVEL3, "INFTL: status of block %d in " "EUN %d is %x\n", block , writeEUN, status); @@ -522,8 +588,8 @@ hitused: nacs = 0; thisEUN = inftl->VUtable[thisVUC]; if (thisEUN != BLOCK_NIL) { - MTD_READOOB(inftl->mbd.mtd, thisEUN * inftl->EraseSize - + 8, 8, &retlen, (char *)&oob.u); + inftl_read_oob(mtd, thisEUN * inftl->EraseSize + + 8, 8, &retlen, (char *)&oob.u); anac = oob.u.a.ANAC + 1; nacs = oob.u.a.NACs + 1; } @@ -544,8 +610,8 @@ hitused: oob.u.a.parityPerField = parity; oob.u.a.discarded = 0xaa; - MTD_WRITEOOB(inftl->mbd.mtd, writeEUN * inftl->EraseSize + 8, 8, - &retlen, (char *)&oob.u); + inftl_write_oob(mtd, writeEUN * inftl->EraseSize + 8, 8, + &retlen, (char *)&oob.u); /* Also back up header... */ oob.u.b.virtualUnitNo = cpu_to_le16(thisVUC); @@ -555,8 +621,8 @@ hitused: oob.u.b.parityPerField = parity; oob.u.b.discarded = 0xaa; - MTD_WRITEOOB(inftl->mbd.mtd, writeEUN * inftl->EraseSize + - SECTORSIZE * 4 + 8, 8, &retlen, (char *)&oob.u); + inftl_write_oob(mtd, writeEUN * inftl->EraseSize + + SECTORSIZE * 4 + 8, 8, &retlen, (char *)&oob.u); inftl->PUtable[writeEUN] = inftl->VUtable[thisVUC]; inftl->VUtable[thisVUC] = writeEUN; @@ -576,6 +642,7 @@ hitused: */ static void INFTL_trydeletechain(struct INFTLrecord *inftl, unsigned thisVUC) { + struct mtd_info *mtd = inftl->mbd.mtd; unsigned char BlockUsed[MAX_SECTORS_PER_UNIT]; unsigned char BlockDeleted[MAX_SECTORS_PER_UNIT]; unsigned int thisEUN, status; @@ -606,9 +673,9 @@ static void INFTL_trydeletechain(struct if (BlockUsed[block] || BlockDeleted[block]) continue; - if (MTD_READOOB(inftl->mbd.mtd, (thisEUN * inftl->EraseSize) - + (block * SECTORSIZE), 8 , &retlen, - (char *)&bci) < 0) + if (inftl_read_oob(mtd, (thisEUN * inftl->EraseSize) + + (block * SECTORSIZE), 8 , &retlen, + (char *)&bci) < 0) status = SECTOR_IGNORE; else status = bci.Status | bci.Status1; @@ -670,12 +737,12 @@ static void INFTL_trydeletechain(struct DEBUG(MTD_DEBUG_LEVEL3, "Deleting EUN %d from VUC %d\n", thisEUN, thisVUC); - if (INFTL_formatblock(inftl, thisEUN) < 0) { + if (INFTL_formatblock(inftl, thisEUN) < 0) { /* * Could not erase : mark block as reserved. */ inftl->PUtable[thisEUN] = BLOCK_RESERVED; - } else { + } else { /* Correctly erased : mark it as free */ inftl->PUtable[thisEUN] = BLOCK_FREE; inftl->numfreeEUNs++; @@ -697,6 +764,7 @@ static int INFTL_deleteblock(struct INFT { unsigned int thisEUN = inftl->VUtable[block / (inftl->EraseSize / SECTORSIZE)]; unsigned long blockofs = (block * SECTORSIZE) & (inftl->EraseSize - 1); + struct mtd_info *mtd = inftl->mbd.mtd; unsigned int status; int silly = MAX_LOOPS; size_t retlen; @@ -706,8 +774,8 @@ static int INFTL_deleteblock(struct INFT "block=%d)\n", inftl, block); while (thisEUN < inftl->nb_blocks) { - if (MTD_READOOB(inftl->mbd.mtd, (thisEUN * inftl->EraseSize) + - blockofs, 8, &retlen, (char *)&bci) < 0) + if (inftl_read_oob(mtd, (thisEUN * inftl->EraseSize) + + blockofs, 8, &retlen, (char *)&bci) < 0) status = SECTOR_IGNORE; else status = bci.Status | bci.Status1; @@ -741,10 +809,10 @@ foundit: if (thisEUN != BLOCK_NIL) { loff_t ptr = (thisEUN * inftl->EraseSize) + blockofs; - if (MTD_READOOB(inftl->mbd.mtd, ptr, 8, &retlen, (char *)&bci) < 0) + if (inftl_read_oob(mtd, ptr, 8, &retlen, (char *)&bci) < 0) return -EIO; bci.Status = bci.Status1 = SECTOR_DELETED; - if (MTD_WRITEOOB(inftl->mbd.mtd, ptr, 8, &retlen, (char *)&bci) < 0) + if (inftl_write_oob(mtd, ptr, 8, &retlen, (char *)&bci) < 0) return -EIO; INFTL_trydeletechain(inftl, block / (inftl->EraseSize / SECTORSIZE)); } @@ -784,9 +852,10 @@ static int inftl_writeblock(struct mtd_b memset(&oob, 0xff, sizeof(struct inftl_oob)); oob.b.Status = oob.b.Status1 = SECTOR_USED; - MTD_WRITEECC(inftl->mbd.mtd, (writeEUN * inftl->EraseSize) + - blockofs, SECTORSIZE, &retlen, (char *)buffer, - (char *)&oob, &inftl->oobinfo); + + inftl_write(inftl->mbd.mtd, (writeEUN * inftl->EraseSize) + + blockofs, SECTORSIZE, &retlen, (char *)buffer, + (char *)&oob); /* * need to write SECTOR_USED flags since they are not written * in mtd_writeecc @@ -804,17 +873,18 @@ static int inftl_readblock(struct mtd_bl struct INFTLrecord *inftl = (void *)mbd; unsigned int thisEUN = inftl->VUtable[block / (inftl->EraseSize / SECTORSIZE)]; unsigned long blockofs = (block * SECTORSIZE) & (inftl->EraseSize - 1); - unsigned int status; + struct mtd_info *mtd = inftl->mbd.mtd; + unsigned int status; int silly = MAX_LOOPS; - struct inftl_bci bci; + struct inftl_bci bci; size_t retlen; DEBUG(MTD_DEBUG_LEVEL3, "INFTL: inftl_readblock(inftl=%p,block=%ld," "buffer=%p)\n", inftl, block, buffer); while (thisEUN < inftl->nb_blocks) { - if (MTD_READOOB(inftl->mbd.mtd, (thisEUN * inftl->EraseSize) + - blockofs, 8, &retlen, (char *)&bci) < 0) + if (inftl_read_oob(mtd, (thisEUN * inftl->EraseSize) + + blockofs, 8, &retlen, (char *)&bci) < 0) status = SECTOR_IGNORE; else status = bci.Status | bci.Status1; @@ -850,10 +920,12 @@ foundit: /* The requested block is not on the media, return all 0x00 */ memset(buffer, 0, SECTORSIZE); } else { - size_t retlen; + size_t retlen; loff_t ptr = (thisEUN * inftl->EraseSize) + blockofs; - if (MTD_READ(inftl->mbd.mtd, ptr, SECTORSIZE, &retlen, - buffer)) + int ret = mtd->read(mtd, ptr, SECTORSIZE, &retlen, buffer); + + /* Handle corrected bit flips gracefully */ + if (ret < 0 && ret != -EUCLEAN) return -EIO; } return 0; diff -puN drivers/mtd/inftlmount.c~git-mtd drivers/mtd/inftlmount.c --- devel/drivers/mtd/inftlmount.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/inftlmount.c 2006-05-29 15:02:34.000000000 -0700 @@ -43,6 +43,11 @@ char inftlmountrev[]="$Revision: 1.18 $"; +extern int inftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len, + size_t *retlen, uint8_t *buf); +extern int inftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len, + size_t *retlen, uint8_t *buf); + /* * find_boot_record: Find the INFTL Media Header and its Spare copy which * contains the various device information of the INFTL partition and @@ -57,6 +62,7 @@ static int find_boot_record(struct INFTL unsigned int i, block; u8 buf[SECTORSIZE]; struct INFTLMediaHeader *mh = &inftl->MediaHdr; + struct mtd_info *mtd = inftl->mbd.mtd; struct INFTLPartition *ip; size_t retlen; @@ -80,8 +86,8 @@ static int find_boot_record(struct INFTL * Check for BNAND header first. Then whinge if it's found * but later checks fail. */ - ret = MTD_READ(inftl->mbd.mtd, block * inftl->EraseSize, - SECTORSIZE, &retlen, buf); + ret = mtd->read(mtd, block * inftl->EraseSize, + SECTORSIZE, &retlen, buf); /* We ignore ret in case the ECC of the MediaHeader is invalid (which is apparently acceptable) */ if (retlen != SECTORSIZE) { @@ -106,8 +112,9 @@ static int find_boot_record(struct INFTL } /* To be safer with BIOS, also use erase mark as discriminant */ - if ((ret = MTD_READOOB(inftl->mbd.mtd, block * inftl->EraseSize + - SECTORSIZE + 8, 8, &retlen, (char *)&h1) < 0)) { + if ((ret = inftl_read_oob(mtd, block * inftl->EraseSize + + SECTORSIZE + 8, 8, &retlen, + (char *)&h1) < 0)) { printk(KERN_WARNING "INFTL: ANAND header found at " "0x%x in mtd%d, but OOB data read failed " "(err %d)\n", block * inftl->EraseSize, @@ -123,8 +130,8 @@ static int find_boot_record(struct INFTL memcpy(mh, buf, sizeof(struct INFTLMediaHeader)); /* Read the spare media header at offset 4096 */ - MTD_READ(inftl->mbd.mtd, block * inftl->EraseSize + 4096, - SECTORSIZE, &retlen, buf); + mtd->read(mtd, block * inftl->EraseSize + 4096, + SECTORSIZE, &retlen, buf); if (retlen != SECTORSIZE) { printk(KERN_WARNING "INFTL: Unable to read spare " "Media Header\n"); @@ -233,7 +240,7 @@ static int find_boot_record(struct INFTL */ instr->addr = ip->Reserved0 * inftl->EraseSize; instr->len = inftl->EraseSize; - MTD_ERASE(inftl->mbd.mtd, instr); + mtd->erase(mtd, instr); } if ((ip->lastUnit - ip->firstUnit + 1) < ip->virtualUnits) { printk(KERN_WARNING "INFTL: Media Header " @@ -350,21 +357,21 @@ static int check_free_sectors(struct INF int len, int check_oob) { u8 buf[SECTORSIZE + inftl->mbd.mtd->oobsize]; + struct mtd_info *mtd = inftl->mbd.mtd; size_t retlen; int i; - DEBUG(MTD_DEBUG_LEVEL3, "INFTL: check_free_sectors(inftl=%p," - "address=0x%x,len=%d,check_oob=%d)\n", inftl, - address, len, check_oob); - for (i = 0; i < len; i += SECTORSIZE) { - if (MTD_READECC(inftl->mbd.mtd, address, SECTORSIZE, &retlen, buf, &buf[SECTORSIZE], &inftl->oobinfo) < 0) + if (mtd->read(mtd, address, SECTORSIZE, &retlen, buf)) return -1; if (memcmpb(buf, 0xff, SECTORSIZE) != 0) return -1; if (check_oob) { - if (memcmpb(buf + SECTORSIZE, 0xff, inftl->mbd.mtd->oobsize) != 0) + if(inftl_read_oob(mtd, address, mtd->oobsize, + &retlen, &buf[SECTORSIZE]) < 0) + return -1; + if (memcmpb(buf + SECTORSIZE, 0xff, mtd->oobsize) != 0) return -1; } address += SECTORSIZE; @@ -387,6 +394,7 @@ int INFTL_formatblock(struct INFTLrecord size_t retlen; struct inftl_unittail uci; struct erase_info *instr = &inftl->instr; + struct mtd_info *mtd = inftl->mbd.mtd; int physblock; DEBUG(MTD_DEBUG_LEVEL3, "INFTL: INFTL_formatblock(inftl=%p," @@ -404,8 +412,9 @@ int INFTL_formatblock(struct INFTLrecord /* Erase one physical eraseblock at a time, even though the NAND api allows us to group them. This way we if we have a failure, we can mark only the failed block in the bbt. */ - for (physblock = 0; physblock < inftl->EraseSize; physblock += instr->len, instr->addr += instr->len) { - MTD_ERASE(inftl->mbd.mtd, instr); + for (physblock = 0; physblock < inftl->EraseSize; + physblock += instr->len, instr->addr += instr->len) { + mtd->erase(inftl->mbd.mtd, instr); if (instr->state == MTD_ERASE_FAILED) { printk(KERN_WARNING "INFTL: error while formatting block %d\n", @@ -414,10 +423,10 @@ int INFTL_formatblock(struct INFTLrecord } /* - * Check the "freeness" of Erase Unit before updating metadata. - * FixMe: is this check really necessary? Since we have check the - * return code after the erase operation. - */ + * Check the "freeness" of Erase Unit before updating metadata. + * FixMe: is this check really necessary? Since we have check + * the return code after the erase operation. + */ if (check_free_sectors(inftl, instr->addr, instr->len, 1) != 0) goto fail; } @@ -429,8 +438,7 @@ int INFTL_formatblock(struct INFTLrecord uci.Reserved[2] = 0; uci.Reserved[3] = 0; instr->addr = block * inftl->EraseSize + SECTORSIZE * 2; - if (MTD_WRITEOOB(inftl->mbd.mtd, instr->addr + - 8, 8, &retlen, (char *)&uci) < 0) + if (inftl_write_oob(mtd, instr->addr + 8, 8, &retlen, (char *)&uci) < 0) goto fail; return 0; fail: @@ -549,6 +557,7 @@ void INFTL_dumpVUchains(struct INFTLreco int INFTL_mount(struct INFTLrecord *s) { + struct mtd_info *mtd = s->mbd.mtd; unsigned int block, first_block, prev_block, last_block; unsigned int first_logical_block, logical_block, erase_mark; int chain_length, do_format_chain; @@ -607,10 +616,11 @@ int INFTL_mount(struct INFTLrecord *s) break; } - if (MTD_READOOB(s->mbd.mtd, block * s->EraseSize + 8, - 8, &retlen, (char *)&h0) < 0 || - MTD_READOOB(s->mbd.mtd, block * s->EraseSize + - 2 * SECTORSIZE + 8, 8, &retlen, (char *)&h1) < 0) { + if (inftl_read_oob(mtd, block * s->EraseSize + 8, + 8, &retlen, (char *)&h0) < 0 || + inftl_read_oob(mtd, block * s->EraseSize + + 2 * SECTORSIZE + 8, 8, &retlen, + (char *)&h1) < 0) { /* Should never happen? */ do_format_chain++; break; diff -puN drivers/mtd/Kconfig~git-mtd drivers/mtd/Kconfig --- devel/drivers/mtd/Kconfig~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/Kconfig 2006-05-29 15:02:34.000000000 -0700 @@ -78,7 +78,7 @@ config MTD_REDBOOT_DIRECTORY_BLOCK option. The option specifies which Flash sectors holds the RedBoot - partition table. A zero or positive value gives an absolete + partition table. A zero or positive value gives an absolute erase block number. A negative value specifies a number of sectors before the end of the device. @@ -103,7 +103,7 @@ config MTD_CMDLINE_PARTS bool "Command line partition table parsing" depends on MTD_PARTITIONS = "y" ---help--- - Allow generic configuration of the MTD paritition tables via the kernel + Allow generic configuration of the MTD partition tables via the kernel command line. Multiple flash resources are supported for hardware where different kinds of flash memory are available. diff -puN drivers/mtd/maps/cfi_flagadm.c~git-mtd drivers/mtd/maps/cfi_flagadm.c --- devel/drivers/mtd/maps/cfi_flagadm.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/maps/cfi_flagadm.c 2006-05-29 15:02:34.000000000 -0700 @@ -1,5 +1,5 @@ /* - * Copyright © 2001 Flaga hf. Medical Devices, Kári Davíðsson + * Copyright © 2001 Flaga hf. Medical Devices, Kári Davíðsson * * $Id: cfi_flagadm.c,v 1.15 2005/11/07 11:14:26 gleixner Exp $ * @@ -135,5 +135,5 @@ module_exit(cleanup_flagadm); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Kári Davíðsson "); +MODULE_AUTHOR("Kári Davíðsson "); MODULE_DESCRIPTION("MTD map driver for Flaga digital module"); diff -puN drivers/mtd/maps/dbox2-flash.c~git-mtd drivers/mtd/maps/dbox2-flash.c --- devel/drivers/mtd/maps/dbox2-flash.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/maps/dbox2-flash.c 2006-05-29 15:02:34.000000000 -0700 @@ -122,5 +122,5 @@ module_exit(cleanup_dbox2_flash); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Kári Davíðsson , Bastian Blank , Alexander Wild "); +MODULE_AUTHOR("Kári Davíðsson , Bastian Blank , Alexander Wild "); MODULE_DESCRIPTION("MTD map driver for D-Box 2 board"); diff -puN drivers/mtd/maps/Kconfig~git-mtd drivers/mtd/maps/Kconfig --- devel/drivers/mtd/maps/Kconfig~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/maps/Kconfig 2006-05-29 15:02:34.000000000 -0700 @@ -37,7 +37,7 @@ config MTD_PHYSMAP_START config MTD_PHYSMAP_LEN hex "Physical length of flash mapping" depends on MTD_PHYSMAP - default "0x4000000" + default "0" help This is the total length of the mapping of the flash chips on your particular board. If there is space, or aliases, in the @@ -78,7 +78,7 @@ config MTD_PNC2000 config MTD_SC520CDP tristate "CFI Flash device mapped on AMD SC520 CDP" - depends on X86 && MTD_CFI + depends on X86 && MTD_CFI && MTD_CONCAT help The SC520 CDP board has two banks of CFI-compliant chips and one Dual-in-line JEDEC chip. This 'mapping' driver supports that @@ -109,7 +109,7 @@ config MTD_TS5500 mtd1 allows you to reprogram your BIOS. BE VERY CAREFUL. Note that jumper 3 ("Write Enable Drive A") must be set - otherwise detection won't succeeed. + otherwise detection won't succeed. config MTD_SBC_GXX tristate "CFI Flash device mapped on Arcom SBC-GXx boards" @@ -200,8 +200,8 @@ config MTD_TSUNAMI Support for the flash chip on Tsunami TIG bus. config MTD_LASAT - tristate "Flash chips on LASAT board" - depends on LASAT + tristate "LASAT flash device" + depends on LASAT && MTD_CFI help Support for the flash chips on the Lasat 100 and 200 boards. @@ -561,7 +561,6 @@ config MTD_PCMCIA config MTD_PCMCIA_ANONYMOUS bool "Use PCMCIA MTD drivers for anonymous PCMCIA cards" depends on MTD_PCMCIA - default N help If this option is enabled, PCMCIA cards which do not report anything about themselves are assumed to be MTD cards. diff -puN drivers/mtd/maps/mtx-1_flash.c~git-mtd drivers/mtd/maps/mtx-1_flash.c --- devel/drivers/mtd/maps/mtx-1_flash.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/maps/mtx-1_flash.c 2006-05-29 15:02:34.000000000 -0700 @@ -4,7 +4,7 @@ * $Id: mtx-1_flash.c,v 1.2 2005/11/07 11:14:27 gleixner Exp $ * * (C) 2005 Bruno Randolf - * (C) 2005 Jörn Engel + * (C) 2005 Jörn Engel * */ diff -puN drivers/mtd/maps/nettel.c~git-mtd drivers/mtd/maps/nettel.c --- devel/drivers/mtd/maps/nettel.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/maps/nettel.c 2006-05-29 15:02:34.000000000 -0700 @@ -20,6 +20,8 @@ #include #include #include +#include +#include #include /****************************************************************************/ @@ -188,7 +190,7 @@ int nettel_eraseconfig(void) set_current_state(TASK_INTERRUPTIBLE); add_wait_queue(&wait_q, &wait); - ret = MTD_ERASE(mtd, &nettel_erase); + ret = mtd->erase(mtd, &nettel_erase); if (ret) { set_current_state(TASK_RUNNING); remove_wait_queue(&wait_q, &wait); diff -puN drivers/mtd/maps/pcmciamtd.c~git-mtd drivers/mtd/maps/pcmciamtd.c --- devel/drivers/mtd/maps/pcmciamtd.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/maps/pcmciamtd.c 2006-05-29 15:02:34.000000000 -0700 @@ -713,6 +713,7 @@ static void pcmciamtd_detach(struct pcmc if(dev->mtd_info) { del_mtd_device(dev->mtd_info); + map_destroy(dev->mtd_info); info("mtd%d: Removed", dev->mtd_info->index); } diff -puN drivers/mtd/maps/physmap.c~git-mtd drivers/mtd/maps/physmap.c --- devel/drivers/mtd/maps/physmap.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/maps/physmap.c 2006-05-29 15:02:34.000000000 -0700 @@ -14,112 +14,229 @@ #include #include #include -#include +#include +#include #include #include #include #include #include +#include -static struct mtd_info *mymtd; - -struct map_info physmap_map = { - .name = "phys_mapped_flash", - .phys = CONFIG_MTD_PHYSMAP_START, - .size = CONFIG_MTD_PHYSMAP_LEN, - .bankwidth = CONFIG_MTD_PHYSMAP_BANKWIDTH, +struct physmap_flash_info { + struct mtd_info *mtd; + struct map_info map; + struct resource *res; +#ifdef CONFIG_MTD_PARTITIONS + int nr_parts; + struct mtd_partition *parts; +#endif }; + +static int physmap_flash_remove(struct platform_device *dev) +{ + struct physmap_flash_info *info; + struct physmap_flash_data *physmap_data; + + info = platform_get_drvdata(dev); + if (info == NULL) + return 0; + platform_set_drvdata(dev, NULL); + + physmap_data = dev->dev.platform_data; + + if (info->mtd != NULL) { #ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition *mtd_parts; -static int mtd_parts_nb; + if (info->nr_parts) { + del_mtd_partitions(info->mtd); + kfree(info->parts); + } else if (physmap_data->nr_parts) { + del_mtd_partitions(info->mtd); + } else { + del_mtd_device(info->mtd); + } +#else + del_mtd_device(info->mtd); +#endif + map_destroy(info->mtd); + } -static int num_physmap_partitions; -static struct mtd_partition *physmap_partitions; + if (info->map.virt != NULL) + iounmap((void *)info->map.virt); -static const char *part_probes[] __initdata = {"cmdlinepart", "RedBoot", NULL}; + if (info->res != NULL) { + release_resource(info->res); + kfree(info->res); + } -void physmap_set_partitions(struct mtd_partition *parts, int num_parts) -{ - physmap_partitions=parts; - num_physmap_partitions=num_parts; + return 0; } -#endif /* CONFIG_MTD_PARTITIONS */ -static int __init init_physmap(void) +static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL }; +#ifdef CONFIG_MTD_PARTITIONS +static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; +#endif + +static int physmap_flash_probe(struct platform_device *dev) { - static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL }; - const char **type; + struct physmap_flash_data *physmap_data; + struct physmap_flash_info *info; + const char **probe_type; + int err; + + physmap_data = dev->dev.platform_data; + if (physmap_data == NULL) + return -ENODEV; + + printk(KERN_NOTICE "physmap platform flash device: %.8lx at %.8lx\n", + dev->resource->end - dev->resource->start + 1, + dev->resource->start); + + info = kmalloc(sizeof(struct physmap_flash_info), GFP_KERNEL); + if (info == NULL) { + err = -ENOMEM; + goto err_out; + } + memset(info, 0, sizeof(*info)); - printk(KERN_NOTICE "physmap flash device: %lx at %lx\n", physmap_map.size, physmap_map.phys); - physmap_map.virt = ioremap(physmap_map.phys, physmap_map.size); + platform_set_drvdata(dev, info); - if (!physmap_map.virt) { - printk("Failed to ioremap\n"); - return -EIO; + info->res = request_mem_region(dev->resource->start, + dev->resource->end - dev->resource->start + 1, + dev->dev.bus_id); + if (info->res == NULL) { + dev_err(&dev->dev, "Could not reserve memory region\n"); + err = -ENOMEM; + goto err_out; } - simple_map_init(&physmap_map); + info->map.name = dev->dev.bus_id; + info->map.phys = dev->resource->start; + info->map.size = dev->resource->end - dev->resource->start + 1; + info->map.bankwidth = physmap_data->width; + info->map.set_vpp = physmap_data->set_vpp; + + info->map.virt = ioremap(info->map.phys, info->map.size); + if (info->map.virt == NULL) { + dev_err(&dev->dev, "Failed to ioremap flash region\n"); + err = EIO; + goto err_out; + } - mymtd = NULL; - type = rom_probe_types; - for(; !mymtd && *type; type++) { - mymtd = do_map_probe(*type, &physmap_map); + simple_map_init(&info->map); + + probe_type = rom_probe_types; + for (; info->mtd == NULL && *probe_type != NULL; probe_type++) + info->mtd = do_map_probe(*probe_type, &info->map); + if (info->mtd == NULL) { + dev_err(&dev->dev, "map_probe failed\n"); + err = -ENXIO; + goto err_out; } - if (mymtd) { - mymtd->owner = THIS_MODULE; + info->mtd->owner = THIS_MODULE; #ifdef CONFIG_MTD_PARTITIONS - mtd_parts_nb = parse_mtd_partitions(mymtd, part_probes, - &mtd_parts, 0); + err = parse_mtd_partitions(info->mtd, part_probe_types, &info->parts, 0); + if (err > 0) { + add_mtd_partitions(info->mtd, info->parts, err); + return 0; + } - if (mtd_parts_nb > 0) - { - add_mtd_partitions (mymtd, mtd_parts, mtd_parts_nb); - return 0; - } + if (physmap_data->nr_parts) { + printk(KERN_NOTICE "Using physmap partition information\n"); + add_mtd_partitions(info->mtd, physmap_data->parts, + physmap_data->nr_parts); + return 0; + } +#endif + + add_mtd_device(info->mtd); + return 0; + +err_out: + physmap_flash_remove(dev); + return err; +} + +static struct platform_driver physmap_flash_driver = { + .probe = physmap_flash_probe, + .remove = physmap_flash_remove, + .driver = { + .name = "physmap-flash", + }, +}; - if (num_physmap_partitions != 0) - { - printk(KERN_NOTICE - "Using physmap partition definition\n"); - add_mtd_partitions (mymtd, physmap_partitions, num_physmap_partitions); - return 0; - } +#ifdef CONFIG_MTD_PHYSMAP_LEN +#if CONFIG_MTD_PHYSMAP_LEN != 0 +#warning using PHYSMAP compat code +#define PHYSMAP_COMPAT +#endif #endif - add_mtd_device(mymtd); - return 0; - } +#ifdef PHYSMAP_COMPAT +static struct physmap_flash_data physmap_flash_data = { + .width = CONFIG_MTD_PHYSMAP_BANKWIDTH, +}; - iounmap(physmap_map.virt); - return -ENXIO; -} +static struct resource physmap_flash_resource = { + .start = CONFIG_MTD_PHYSMAP_START, + .end = CONFIG_MTD_PHYSMAP_START + CONFIG_MTD_PHYSMAP_LEN, + .flags = IORESOURCE_MEM, +}; -static void __exit cleanup_physmap(void) +static struct platform_device physmap_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &physmap_flash_data, + }, + .num_resources = 1, + .resource = &physmap_flash_resource, +}; + +void physmap_configure(unsigned long addr, unsigned long size, + int bankwidth, void (*set_vpp)(struct map_info *, int)) { + physmap_flash_resource.start = addr; + physmap_flash_resource.end = addr + size - 1; + physmap_flash_data.width = bankwidth; + physmap_flash_data.set_vpp = set_vpp; +} + #ifdef CONFIG_MTD_PARTITIONS - if (mtd_parts_nb) { - del_mtd_partitions(mymtd); - kfree(mtd_parts); - } else if (num_physmap_partitions) { - del_mtd_partitions(mymtd); - } else { - del_mtd_device(mymtd); - } -#else - del_mtd_device(mymtd); +void physmap_set_partitions(struct mtd_partition *parts, int num_parts) +{ + physmap_flash_data.nr_parts = num_parts; + physmap_flash_data.parts = parts; +} +#endif #endif - map_destroy(mymtd); - iounmap(physmap_map.virt); - physmap_map.virt = NULL; +static int __init physmap_init(void) +{ + int err; + + err = platform_driver_register(&physmap_flash_driver); +#ifdef PHYSMAP_COMPAT + if (err == 0) + platform_device_register(&physmap_flash); +#endif + + return err; } -module_init(init_physmap); -module_exit(cleanup_physmap); +static void __exit physmap_exit(void) +{ +#ifdef PHYSMAP_COMPAT + platform_device_unregister(&physmap_flash); +#endif + platform_driver_unregister(&physmap_flash_driver); +} +module_init(physmap_init); +module_exit(physmap_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("David Woodhouse "); diff -puN drivers/mtd/mtdblock.c~git-mtd drivers/mtd/mtdblock.c --- devel/drivers/mtd/mtdblock.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/mtdblock.c 2006-05-29 15:02:34.000000000 -0700 @@ -71,7 +71,7 @@ static int erase_write (struct mtd_info set_current_state(TASK_INTERRUPTIBLE); add_wait_queue(&wait_q, &wait); - ret = MTD_ERASE(mtd, &erase); + ret = mtd->erase(mtd, &erase); if (ret) { set_current_state(TASK_RUNNING); remove_wait_queue(&wait_q, &wait); @@ -88,7 +88,7 @@ static int erase_write (struct mtd_info * Next, writhe data to flash. */ - ret = MTD_WRITE (mtd, pos, len, &retlen, buf); + ret = mtd->write(mtd, pos, len, &retlen, buf); if (ret) return ret; if (retlen != len) @@ -138,7 +138,7 @@ static int do_cached_write (struct mtdbl mtd->name, pos, len); if (!sect_size) - return MTD_WRITE (mtd, pos, len, &retlen, buf); + return mtd->write(mtd, pos, len, &retlen, buf); while (len > 0) { unsigned long sect_start = (pos/sect_size)*sect_size; @@ -170,7 +170,8 @@ static int do_cached_write (struct mtdbl mtdblk->cache_offset != sect_start) { /* fill the cache with the current sector */ mtdblk->cache_state = STATE_EMPTY; - ret = MTD_READ(mtd, sect_start, sect_size, &retlen, mtdblk->cache_data); + ret = mtd->read(mtd, sect_start, sect_size, + &retlen, mtdblk->cache_data); if (ret) return ret; if (retlen != sect_size) @@ -207,7 +208,7 @@ static int do_cached_read (struct mtdblk mtd->name, pos, len); if (!sect_size) - return MTD_READ (mtd, pos, len, &retlen, buf); + return mtd->read(mtd, pos, len, &retlen, buf); while (len > 0) { unsigned long sect_start = (pos/sect_size)*sect_size; @@ -226,7 +227,7 @@ static int do_cached_read (struct mtdblk mtdblk->cache_offset == sect_start) { memcpy (buf, mtdblk->cache_data + offset, size); } else { - ret = MTD_READ (mtd, pos, size, &retlen, buf); + ret = mtd->read(mtd, pos, size, &retlen, buf); if (ret) return ret; if (retlen != size) @@ -288,8 +289,7 @@ static int mtdblock_open(struct mtd_blkt mutex_init(&mtdblk->cache_mutex); mtdblk->cache_state = STATE_EMPTY; - if ((mtdblk->mtd->flags & MTD_CAP_RAM) != MTD_CAP_RAM && - mtdblk->mtd->erasesize) { + if (mtdblk->mtd->type != MTD_RAM && mtdblk->mtd->erasesize) { mtdblk->cache_size = mtdblk->mtd->erasesize; mtdblk->cache_data = NULL; } diff -puN drivers/mtd/mtdblock_ro.c~git-mtd drivers/mtd/mtdblock_ro.c --- devel/drivers/mtd/mtdblock_ro.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/mtdblock_ro.c 2006-05-29 15:02:34.000000000 -0700 @@ -45,9 +45,7 @@ static void mtdblock_add_mtd(struct mtd_ dev->blksize = 512; dev->size = mtd->size >> 9; dev->tr = tr; - if ((mtd->flags & (MTD_CLEAR_BITS|MTD_SET_BITS|MTD_WRITEABLE)) != - (MTD_CLEAR_BITS|MTD_SET_BITS|MTD_WRITEABLE)) - dev->readonly = 1; + dev->readonly = 1; add_mtd_blktrans_dev(dev); } diff -puN drivers/mtd/mtdchar.c~git-mtd drivers/mtd/mtdchar.c --- devel/drivers/mtd/mtdchar.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/mtdchar.c 2006-05-29 15:02:34.000000000 -0700 @@ -170,16 +170,22 @@ static ssize_t mtd_read(struct file *fil /* FIXME: Use kiovec in 2.5 to lock down the user's buffers and pass them directly to the MTD functions */ + + if (count > MAX_KMALLOC_SIZE) + kbuf=kmalloc(MAX_KMALLOC_SIZE, GFP_KERNEL); + else + kbuf=kmalloc(count, GFP_KERNEL); + + if (!kbuf) + return -ENOMEM; + while (count) { + if (count > MAX_KMALLOC_SIZE) len = MAX_KMALLOC_SIZE; else len = count; - kbuf=kmalloc(len,GFP_KERNEL); - if (!kbuf) - return -ENOMEM; - switch (MTD_MODE(file)) { case MTD_MODE_OTP_FACT: ret = mtd->read_fact_prot_reg(mtd, *ppos, len, &retlen, kbuf); @@ -188,18 +194,21 @@ static ssize_t mtd_read(struct file *fil ret = mtd->read_user_prot_reg(mtd, *ppos, len, &retlen, kbuf); break; default: - ret = MTD_READ(mtd, *ppos, len, &retlen, kbuf); + ret = mtd->read(mtd, *ppos, len, &retlen, kbuf); } /* Nand returns -EBADMSG on ecc errors, but it returns * the data. For our userspace tools it is important * to dump areas with ecc errors ! + * For kernel internal usage it also might return -EUCLEAN + * to signal the caller that a bitflip has occured and has + * been corrected by the ECC algorithm. * Userspace software which accesses NAND this way * must be aware of the fact that it deals with NAND */ - if (!ret || (ret == -EBADMSG)) { + if (!ret || (ret == -EUCLEAN) || (ret == -EBADMSG)) { *ppos += retlen; if (copy_to_user(buf, kbuf, retlen)) { - kfree(kbuf); + kfree(kbuf); return -EFAULT; } else @@ -215,9 +224,9 @@ static ssize_t mtd_read(struct file *fil return ret; } - kfree(kbuf); } + kfree(kbuf); return total_retlen; } /* mtd_read */ @@ -241,18 +250,21 @@ static ssize_t mtd_write(struct file *fi if (!count) return 0; + if (count > MAX_KMALLOC_SIZE) + kbuf=kmalloc(MAX_KMALLOC_SIZE, GFP_KERNEL); + else + kbuf=kmalloc(count, GFP_KERNEL); + + if (!kbuf) + return -ENOMEM; + while (count) { + if (count > MAX_KMALLOC_SIZE) len = MAX_KMALLOC_SIZE; else len = count; - kbuf=kmalloc(len,GFP_KERNEL); - if (!kbuf) { - printk("kmalloc is null\n"); - return -ENOMEM; - } - if (copy_from_user(kbuf, buf, len)) { kfree(kbuf); return -EFAULT; @@ -282,10 +294,9 @@ static ssize_t mtd_write(struct file *fi kfree(kbuf); return ret; } - - kfree(kbuf); } + kfree(kbuf); return total_retlen; } /* mtd_write */ @@ -400,8 +411,7 @@ static int mtd_ioctl(struct inode *inode case MEMWRITEOOB: { struct mtd_oob_buf buf; - void *databuf; - ssize_t retlen; + struct mtd_oob_ops ops; if(!(file->f_mode & 2)) return -EPERM; @@ -409,7 +419,7 @@ static int mtd_ioctl(struct inode *inode if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf))) return -EFAULT; - if (buf.length > 0x4096) + if (buf.length > 4096) return -EINVAL; if (!mtd->write_oob) @@ -421,21 +431,32 @@ static int mtd_ioctl(struct inode *inode if (ret) return ret; - databuf = kmalloc(buf.length, GFP_KERNEL); - if (!databuf) + ops.len = buf.length; + ops.ooblen = mtd->oobsize; + ops.ooboffs = buf.start & (mtd->oobsize - 1); + ops.datbuf = NULL; + ops.mode = MTD_OOB_PLACE; + + if (ops.ooboffs && ops.len > (ops.ooblen - ops.ooboffs)) + return -EINVAL; + + ops.oobbuf = kmalloc(buf.length, GFP_KERNEL); + if (!ops.oobbuf) return -ENOMEM; - if (copy_from_user(databuf, buf.ptr, buf.length)) { - kfree(databuf); + if (copy_from_user(ops.oobbuf, buf.ptr, buf.length)) { + kfree(ops.oobbuf); return -EFAULT; } - ret = (mtd->write_oob)(mtd, buf.start, buf.length, &retlen, databuf); + buf.start &= ~(mtd->oobsize - 1); + ret = mtd->write_oob(mtd, buf.start, &ops); - if (copy_to_user(argp + sizeof(uint32_t), &retlen, sizeof(uint32_t))) + if (copy_to_user(argp + sizeof(uint32_t), &ops.retlen, + sizeof(uint32_t))) ret = -EFAULT; - kfree(databuf); + kfree(ops.oobbuf); break; } @@ -443,13 +464,12 @@ static int mtd_ioctl(struct inode *inode case MEMREADOOB: { struct mtd_oob_buf buf; - void *databuf; - ssize_t retlen; + struct mtd_oob_ops ops; if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf))) return -EFAULT; - if (buf.length > 0x4096) + if (buf.length > 4096) return -EINVAL; if (!mtd->read_oob) @@ -457,22 +477,32 @@ static int mtd_ioctl(struct inode *inode else ret = access_ok(VERIFY_WRITE, buf.ptr, buf.length) ? 0 : -EFAULT; - if (ret) return ret; - databuf = kmalloc(buf.length, GFP_KERNEL); - if (!databuf) + ops.len = buf.length; + ops.ooblen = mtd->oobsize; + ops.ooboffs = buf.start & (mtd->oobsize - 1); + ops.datbuf = NULL; + ops.mode = MTD_OOB_PLACE; + + if (ops.ooboffs && ops.len > (ops.ooblen - ops.ooboffs)) + return -EINVAL; + + ops.oobbuf = kmalloc(buf.length, GFP_KERNEL); + if (!ops.oobbuf) return -ENOMEM; - ret = (mtd->read_oob)(mtd, buf.start, buf.length, &retlen, databuf); + buf.start &= ~(mtd->oobsize - 1); + ret = mtd->read_oob(mtd, buf.start, &ops); - if (put_user(retlen, (uint32_t __user *)argp)) + if (put_user(ops.retlen, (uint32_t __user *)argp)) ret = -EFAULT; - else if (retlen && copy_to_user(buf.ptr, databuf, retlen)) + else if (ops.retlen && copy_to_user(buf.ptr, ops.oobbuf, + ops.retlen)) ret = -EFAULT; - kfree(databuf); + kfree(ops.oobbuf); break; } @@ -504,19 +534,35 @@ static int mtd_ioctl(struct inode *inode break; } - case MEMSETOOBSEL: + /* Legacy interface */ + case MEMGETOOBSEL: { - if (copy_from_user(&mtd->oobinfo, argp, sizeof(struct nand_oobinfo))) + struct nand_oobinfo oi; + + if (!mtd->ecclayout) + return -EOPNOTSUPP; + if (mtd->ecclayout->eccbytes > ARRAY_SIZE(oi.eccpos)) + return -EINVAL; + + oi.useecc = MTD_NANDECC_AUTOPLACE; + memcpy(&oi.eccpos, mtd->ecclayout->eccpos, sizeof(oi.eccpos)); + memcpy(&oi.oobfree, mtd->ecclayout->oobfree, + sizeof(oi.oobfree)); + + if (copy_to_user(argp, &oi, sizeof(struct nand_oobinfo))) return -EFAULT; break; } - case MEMGETOOBSEL: - { - if (copy_to_user(argp, &(mtd->oobinfo), sizeof(struct nand_oobinfo))) + case ECCGETLAYOUT: + + if (!mtd->ecclayout) + return -EOPNOTSUPP; + + if (copy_to_user(argp, &mtd->ecclayout, + sizeof(struct nand_ecclayout))) return -EFAULT; break; - } case MEMGETBADBLOCK: { @@ -544,7 +590,7 @@ static int mtd_ioctl(struct inode *inode break; } -#ifdef CONFIG_MTD_OTP +#if defined(CONFIG_MTD_OTP) || defined(CONFIG_MTD_ONENAND_OTP) case OTPSELECT: { int mode; diff -puN drivers/mtd/mtdconcat.c~git-mtd drivers/mtd/mtdconcat.c --- devel/drivers/mtd/mtdconcat.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/mtdconcat.c 2006-05-29 15:02:34.000000000 -0700 @@ -19,6 +19,8 @@ #include #include +#include + /* * Our storage structure: * Subdev points to an array of pointers to struct mtd_info objects @@ -54,7 +56,7 @@ concat_read(struct mtd_info *mtd, loff_t size_t * retlen, u_char * buf) { struct mtd_concat *concat = CONCAT(mtd); - int err = -EINVAL; + int ret = 0, err = -EINVAL; int i; *retlen = 0; @@ -78,9 +80,18 @@ concat_read(struct mtd_info *mtd, loff_t err = subdev->read(subdev, from, size, &retsize, buf); - if (err) + if (err && (err != -EBADMSG) && (err != -EUCLEAN)) break; + /* Save information about bitflips! */ + if (err) { + if (err == -EBADMSG) + ret = err; + else if (!ret) + ret = err; + err = 0; + } + *retlen += retsize; len -= size; if (len == 0) @@ -90,7 +101,7 @@ concat_read(struct mtd_info *mtd, loff_t buf += size; from = 0; } - return err; + return err ? err : ret; } static int @@ -141,211 +152,173 @@ concat_write(struct mtd_info *mtd, loff_ } static int -concat_read_ecc(struct mtd_info *mtd, loff_t from, size_t len, - size_t * retlen, u_char * buf, u_char * eccbuf, - struct nand_oobinfo *oobsel) +concat_writev(struct mtd_info *mtd, const struct kvec *vecs, + unsigned long count, loff_t to, size_t * retlen) { struct mtd_concat *concat = CONCAT(mtd); - int err = -EINVAL; + struct kvec *vecs_copy; + unsigned long entry_low, entry_high; + size_t total_len = 0; int i; + int err = -EINVAL; - *retlen = 0; - - for (i = 0; i < concat->num_subdev; i++) { - struct mtd_info *subdev = concat->subdev[i]; - size_t size, retsize; - - if (from >= subdev->size) { - /* Not destined for this subdev */ - size = 0; - from -= subdev->size; - continue; - } - - if (from + len > subdev->size) - /* First part goes into this subdev */ - size = subdev->size - from; - else - /* Entire transaction goes into this subdev */ - size = len; + if (!(mtd->flags & MTD_WRITEABLE)) + return -EROFS; - if (subdev->read_ecc) - err = subdev->read_ecc(subdev, from, size, - &retsize, buf, eccbuf, oobsel); - else - err = -EINVAL; + *retlen = 0; - if (err) - break; + /* Calculate total length of data */ + for (i = 0; i < count; i++) + total_len += vecs[i].iov_len; - *retlen += retsize; - len -= size; - if (len == 0) - break; + /* Do not allow write past end of device */ + if ((to + total_len) > mtd->size) + return -EINVAL; - err = -EINVAL; - buf += size; - if (eccbuf) { - eccbuf += subdev->oobsize; - /* in nand.c at least, eccbufs are - tagged with 2 (int)eccstatus'; we - must account for these */ - eccbuf += 2 * (sizeof (int)); - } - from = 0; + /* Check alignment */ + if (mtd->writesize > 1) { + loff_t __to = to; + if (do_div(__to, mtd->writesize) || (total_len % mtd->writesize)) + return -EINVAL; } - return err; -} - -static int -concat_write_ecc(struct mtd_info *mtd, loff_t to, size_t len, - size_t * retlen, const u_char * buf, u_char * eccbuf, - struct nand_oobinfo *oobsel) -{ - struct mtd_concat *concat = CONCAT(mtd); - int err = -EINVAL; - int i; - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - - *retlen = 0; + /* make a copy of vecs */ + vecs_copy = kmalloc(sizeof(struct kvec) * count, GFP_KERNEL); + if (!vecs_copy) + return -ENOMEM; + memcpy(vecs_copy, vecs, sizeof(struct kvec) * count); + entry_low = 0; for (i = 0; i < concat->num_subdev; i++) { struct mtd_info *subdev = concat->subdev[i]; - size_t size, retsize; + size_t size, wsize, retsize, old_iov_len; if (to >= subdev->size) { - size = 0; to -= subdev->size; continue; } - if (to + len > subdev->size) - size = subdev->size - to; - else - size = len; + + size = min(total_len, (size_t)(subdev->size - to)); + wsize = size; /* store for future use */ + + entry_high = entry_low; + while (entry_high < count) { + if (size <= vecs_copy[entry_high].iov_len) + break; + size -= vecs_copy[entry_high++].iov_len; + } + + old_iov_len = vecs_copy[entry_high].iov_len; + vecs_copy[entry_high].iov_len = size; if (!(subdev->flags & MTD_WRITEABLE)) err = -EROFS; - else if (subdev->write_ecc) - err = subdev->write_ecc(subdev, to, size, - &retsize, buf, eccbuf, oobsel); else - err = -EINVAL; + err = subdev->writev(subdev, &vecs_copy[entry_low], + entry_high - entry_low + 1, to, &retsize); + + vecs_copy[entry_high].iov_len = old_iov_len - size; + vecs_copy[entry_high].iov_base += size; + + entry_low = entry_high; if (err) break; *retlen += retsize; - len -= size; - if (len == 0) + total_len -= wsize; + + if (total_len == 0) break; err = -EINVAL; - buf += size; - if (eccbuf) - eccbuf += subdev->oobsize; to = 0; } + + kfree(vecs_copy); return err; } static int -concat_read_oob(struct mtd_info *mtd, loff_t from, size_t len, - size_t * retlen, u_char * buf) +concat_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) { struct mtd_concat *concat = CONCAT(mtd); - int err = -EINVAL; - int i; + struct mtd_oob_ops devops = *ops; + int i, err; - *retlen = 0; + ops->retlen = 0; for (i = 0; i < concat->num_subdev; i++) { struct mtd_info *subdev = concat->subdev[i]; - size_t size, retsize; if (from >= subdev->size) { - /* Not destined for this subdev */ - size = 0; from -= subdev->size; continue; } - if (from + len > subdev->size) - /* First part goes into this subdev */ - size = subdev->size - from; - else - /* Entire transaction goes into this subdev */ - size = len; - if (subdev->read_oob) - err = subdev->read_oob(subdev, from, size, - &retsize, buf); - else - err = -EINVAL; + /* partial read ? */ + if (from + devops.len > subdev->size) + devops.len = subdev->size - from; + err = subdev->read_oob(subdev, from, &devops); + ops->retlen += devops.retlen; if (err) - break; + return err; - *retlen += retsize; - len -= size; - if (len == 0) - break; + devops.len = ops->len - ops->retlen; + if (!devops.len) + return 0; + + if (devops.datbuf) + devops.datbuf += devops.retlen; + if (devops.oobbuf) + devops.oobbuf += devops.ooblen; - err = -EINVAL; - buf += size; from = 0; } - return err; + return -EINVAL; } static int -concat_write_oob(struct mtd_info *mtd, loff_t to, size_t len, - size_t * retlen, const u_char * buf) +concat_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops) { struct mtd_concat *concat = CONCAT(mtd); - int err = -EINVAL; - int i; + struct mtd_oob_ops devops = *ops; + int i, err; if (!(mtd->flags & MTD_WRITEABLE)) return -EROFS; - *retlen = 0; + ops->retlen = 0; for (i = 0; i < concat->num_subdev; i++) { struct mtd_info *subdev = concat->subdev[i]; - size_t size, retsize; if (to >= subdev->size) { - size = 0; to -= subdev->size; continue; } - if (to + len > subdev->size) - size = subdev->size - to; - else - size = len; - if (!(subdev->flags & MTD_WRITEABLE)) - err = -EROFS; - else if (subdev->write_oob) - err = subdev->write_oob(subdev, to, size, &retsize, - buf); - else - err = -EINVAL; + /* partial write ? */ + if (to + devops.len > subdev->size) + devops.len = subdev->size - to; + err = subdev->write_oob(subdev, to, &devops); + ops->retlen += devops.retlen; if (err) - break; + return err; - *retlen += retsize; - len -= size; - if (len == 0) - break; - - err = -EINVAL; - buf += size; + devops.len = ops->len - ops->retlen; + if (!devops.len) + return 0; + + if (devops.datbuf) + devops.datbuf += devops.retlen; + if (devops.oobbuf) + devops.oobbuf += devops.ooblen; to = 0; } - return err; + return -EINVAL; } static void concat_erase_callback(struct erase_info *instr) @@ -636,6 +609,58 @@ static void concat_resume(struct mtd_inf } } +static int concat_block_isbad(struct mtd_info *mtd, loff_t ofs) +{ + struct mtd_concat *concat = CONCAT(mtd); + int i, res = 0; + + if (!concat->subdev[0]->block_isbad) + return res; + + if (ofs > mtd->size) + return -EINVAL; + + for (i = 0; i < concat->num_subdev; i++) { + struct mtd_info *subdev = concat->subdev[i]; + + if (ofs >= subdev->size) { + ofs -= subdev->size; + continue; + } + + res = subdev->block_isbad(subdev, ofs); + break; + } + + return res; +} + +static int concat_block_markbad(struct mtd_info *mtd, loff_t ofs) +{ + struct mtd_concat *concat = CONCAT(mtd); + int i, err = -EINVAL; + + if (!concat->subdev[0]->block_markbad) + return 0; + + if (ofs > mtd->size) + return -EINVAL; + + for (i = 0; i < concat->num_subdev; i++) { + struct mtd_info *subdev = concat->subdev[i]; + + if (ofs >= subdev->size) { + ofs -= subdev->size; + continue; + } + + err = subdev->block_markbad(subdev, ofs); + break; + } + + return err; +} + /* * This function constructs a virtual MTD device by concatenating * num_devs MTD devices. A pointer to the new device object is @@ -677,18 +702,20 @@ struct mtd_info *mtd_concat_create(struc concat->mtd.flags = subdev[0]->flags; concat->mtd.size = subdev[0]->size; concat->mtd.erasesize = subdev[0]->erasesize; - concat->mtd.oobblock = subdev[0]->oobblock; + concat->mtd.writesize = subdev[0]->writesize; concat->mtd.oobsize = subdev[0]->oobsize; concat->mtd.ecctype = subdev[0]->ecctype; concat->mtd.eccsize = subdev[0]->eccsize; - if (subdev[0]->read_ecc) - concat->mtd.read_ecc = concat_read_ecc; - if (subdev[0]->write_ecc) - concat->mtd.write_ecc = concat_write_ecc; + if (subdev[0]->writev) + concat->mtd.writev = concat_writev; if (subdev[0]->read_oob) concat->mtd.read_oob = concat_read_oob; if (subdev[0]->write_oob) concat->mtd.write_oob = concat_write_oob; + if (subdev[0]->block_isbad) + concat->mtd.block_isbad = concat_block_isbad; + if (subdev[0]->block_markbad) + concat->mtd.block_markbad = concat_block_markbad; concat->subdev[0] = subdev[0]; @@ -717,12 +744,10 @@ struct mtd_info *mtd_concat_create(struc subdev[i]->flags & MTD_WRITEABLE; } concat->mtd.size += subdev[i]->size; - if (concat->mtd.oobblock != subdev[i]->oobblock || + if (concat->mtd.writesize != subdev[i]->writesize || concat->mtd.oobsize != subdev[i]->oobsize || concat->mtd.ecctype != subdev[i]->ecctype || concat->mtd.eccsize != subdev[i]->eccsize || - !concat->mtd.read_ecc != !subdev[i]->read_ecc || - !concat->mtd.write_ecc != !subdev[i]->write_ecc || !concat->mtd.read_oob != !subdev[i]->read_oob || !concat->mtd.write_oob != !subdev[i]->write_oob) { kfree(concat); @@ -734,14 +759,11 @@ struct mtd_info *mtd_concat_create(struc } + concat->mtd.ecclayout = subdev[0]->ecclayout; + concat->num_subdev = num_devs; concat->mtd.name = name; - /* - * NOTE: for now, we do not provide any readv()/writev() methods - * because they are messy to implement and they are not - * used to a great extent anyway. - */ concat->mtd.erase = concat_erase; concat->mtd.read = concat_read; concat->mtd.write = concat_write; diff -puN drivers/mtd/mtdcore.c~git-mtd drivers/mtd/mtdcore.c --- devel/drivers/mtd/mtdcore.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/mtdcore.c 2006-05-29 15:02:34.000000000 -0700 @@ -254,37 +254,6 @@ int default_mtd_writev(struct mtd_info * return ret; } - -/* default_mtd_readv - default mtd readv method for MTD devices that dont - * implement their own - */ - -int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs, - unsigned long count, loff_t from, size_t *retlen) -{ - unsigned long i; - size_t totlen = 0, thislen; - int ret = 0; - - if(!mtd->read) { - ret = -EIO; - } else { - for (i=0; iread(mtd, from, vecs[i].iov_len, &thislen, vecs[i].iov_base); - totlen += thislen; - if (ret || thislen != vecs[i].iov_len) - break; - from += vecs[i].iov_len; - } - } - if (retlen) - *retlen = totlen; - return ret; -} - - EXPORT_SYMBOL(add_mtd_device); EXPORT_SYMBOL(del_mtd_device); EXPORT_SYMBOL(get_mtd_device); @@ -292,7 +261,6 @@ EXPORT_SYMBOL(put_mtd_device); EXPORT_SYMBOL(register_mtd_user); EXPORT_SYMBOL(unregister_mtd_user); EXPORT_SYMBOL(default_mtd_writev); -EXPORT_SYMBOL(default_mtd_readv); #ifdef CONFIG_PROC_FS diff -puN drivers/mtd/mtdpart.c~git-mtd drivers/mtd/mtdpart.c --- devel/drivers/mtd/mtdpart.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/mtdpart.c 2006-05-29 15:02:34.000000000 -0700 @@ -55,12 +55,8 @@ static int part_read (struct mtd_info *m len = 0; else if (from + len > mtd->size) len = mtd->size - from; - if (part->master->read_ecc == NULL) - return part->master->read (part->master, from + part->offset, - len, retlen, buf); - else - return part->master->read_ecc (part->master, from + part->offset, - len, retlen, buf, NULL, &mtd->oobinfo); + return part->master->read (part->master, from + part->offset, + len, retlen, buf); } static int part_point (struct mtd_info *mtd, loff_t from, size_t len, @@ -74,6 +70,7 @@ static int part_point (struct mtd_info * return part->master->point (part->master, from + part->offset, len, retlen, buf); } + static void part_unpoint (struct mtd_info *mtd, u_char *addr, loff_t from, size_t len) { struct mtd_part *part = PART(mtd); @@ -81,31 +78,16 @@ static void part_unpoint (struct mtd_inf part->master->unpoint (part->master, addr, from + part->offset, len); } - -static int part_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel) +static int part_read_oob(struct mtd_info *mtd, loff_t from, + struct mtd_oob_ops *ops) { struct mtd_part *part = PART(mtd); - if (oobsel == NULL) - oobsel = &mtd->oobinfo; - if (from >= mtd->size) - len = 0; - else if (from + len > mtd->size) - len = mtd->size - from; - return part->master->read_ecc (part->master, from + part->offset, - len, retlen, buf, eccbuf, oobsel); -} -static int part_read_oob (struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf) -{ - struct mtd_part *part = PART(mtd); if (from >= mtd->size) - len = 0; - else if (from + len > mtd->size) - len = mtd->size - from; - return part->master->read_oob (part->master, from + part->offset, - len, retlen, buf); + return -EINVAL; + if (from + ops->len > mtd->size) + return -EINVAL; + return part->master->read_oob(part->master, from + part->offset, ops); } static int part_read_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len, @@ -148,44 +130,23 @@ static int part_write (struct mtd_info * len = 0; else if (to + len > mtd->size) len = mtd->size - to; - if (part->master->write_ecc == NULL) - return part->master->write (part->master, to + part->offset, - len, retlen, buf); - else - return part->master->write_ecc (part->master, to + part->offset, - len, retlen, buf, NULL, &mtd->oobinfo); - + return part->master->write (part->master, to + part->offset, + len, retlen, buf); } -static int part_write_ecc (struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf, - u_char *eccbuf, struct nand_oobinfo *oobsel) +static int part_write_oob(struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops) { struct mtd_part *part = PART(mtd); - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - if (oobsel == NULL) - oobsel = &mtd->oobinfo; - if (to >= mtd->size) - len = 0; - else if (to + len > mtd->size) - len = mtd->size - to; - return part->master->write_ecc (part->master, to + part->offset, - len, retlen, buf, eccbuf, oobsel); -} -static int part_write_oob (struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) -{ - struct mtd_part *part = PART(mtd); if (!(mtd->flags & MTD_WRITEABLE)) return -EROFS; + if (to >= mtd->size) - len = 0; - else if (to + len > mtd->size) - len = mtd->size - to; - return part->master->write_oob (part->master, to + part->offset, - len, retlen, buf); + return -EINVAL; + if (to + ops->len > mtd->size) + return -EINVAL; + return part->master->write_oob(part->master, to + part->offset, ops); } static int part_write_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len, @@ -208,52 +169,8 @@ static int part_writev (struct mtd_info struct mtd_part *part = PART(mtd); if (!(mtd->flags & MTD_WRITEABLE)) return -EROFS; - if (part->master->writev_ecc == NULL) - return part->master->writev (part->master, vecs, count, + return part->master->writev (part->master, vecs, count, to + part->offset, retlen); - else - return part->master->writev_ecc (part->master, vecs, count, - to + part->offset, retlen, - NULL, &mtd->oobinfo); -} - -static int part_readv (struct mtd_info *mtd, struct kvec *vecs, - unsigned long count, loff_t from, size_t *retlen) -{ - struct mtd_part *part = PART(mtd); - if (part->master->readv_ecc == NULL) - return part->master->readv (part->master, vecs, count, - from + part->offset, retlen); - else - return part->master->readv_ecc (part->master, vecs, count, - from + part->offset, retlen, - NULL, &mtd->oobinfo); -} - -static int part_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, - unsigned long count, loff_t to, size_t *retlen, - u_char *eccbuf, struct nand_oobinfo *oobsel) -{ - struct mtd_part *part = PART(mtd); - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - if (oobsel == NULL) - oobsel = &mtd->oobinfo; - return part->master->writev_ecc (part->master, vecs, count, - to + part->offset, retlen, - eccbuf, oobsel); -} - -static int part_readv_ecc (struct mtd_info *mtd, struct kvec *vecs, - unsigned long count, loff_t from, size_t *retlen, - u_char *eccbuf, struct nand_oobinfo *oobsel) -{ - struct mtd_part *part = PART(mtd); - if (oobsel == NULL) - oobsel = &mtd->oobinfo; - return part->master->readv_ecc (part->master, vecs, count, - from + part->offset, retlen, - eccbuf, oobsel); } static int part_erase (struct mtd_info *mtd, struct erase_info *instr) @@ -398,7 +315,7 @@ int add_mtd_partitions(struct mtd_info * slave->mtd.type = master->type; slave->mtd.flags = master->flags & ~parts[i].mask_flags; slave->mtd.size = parts[i].size; - slave->mtd.oobblock = master->oobblock; + slave->mtd.writesize = master->writesize; slave->mtd.oobsize = master->oobsize; slave->mtd.ecctype = master->ecctype; slave->mtd.eccsize = master->eccsize; @@ -415,10 +332,6 @@ int add_mtd_partitions(struct mtd_info * slave->mtd.unpoint = part_unpoint; } - if (master->read_ecc) - slave->mtd.read_ecc = part_read_ecc; - if (master->write_ecc) - slave->mtd.write_ecc = part_write_ecc; if (master->read_oob) slave->mtd.read_oob = part_read_oob; if (master->write_oob) @@ -443,12 +356,6 @@ int add_mtd_partitions(struct mtd_info * } if (master->writev) slave->mtd.writev = part_writev; - if (master->readv) - slave->mtd.readv = part_readv; - if (master->writev_ecc) - slave->mtd.writev_ecc = part_writev_ecc; - if (master->readv_ecc) - slave->mtd.readv_ecc = part_readv_ecc; if (master->lock) slave->mtd.lock = part_lock; if (master->unlock) @@ -528,8 +435,7 @@ int add_mtd_partitions(struct mtd_info * parts[i].name); } - /* copy oobinfo from master */ - memcpy(&slave->mtd.oobinfo, &master->oobinfo, sizeof(slave->mtd.oobinfo)); + slave->mtd.ecclayout = master->ecclayout; if(parts[i].mtdp) { /* store the object pointer (caller may or may not register it */ diff -puN /dev/null drivers/mtd/nand/ams-delta.c --- /dev/null 2006-05-29 10:18:53.280907750 -0700 +++ devel-akpm/drivers/mtd/nand/ams-delta.c 2006-05-29 15:02:34.000000000 -0700 @@ -0,0 +1,237 @@ +/* + * drivers/mtd/nand/ams-delta.c + * + * Copyright (C) 2006 Jonathan McDowell + * + * Derived from drivers/mtd/toto.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Overview: + * This is a device driver for the NAND flash device found on the + * Amstrad E3 (Delta). + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * MTD structure for E3 (Delta) + */ +static struct mtd_info *ams_delta_mtd = NULL; + +#define NAND_MASK (AMS_DELTA_LATCH2_NAND_NRE | AMS_DELTA_LATCH2_NAND_NWE | AMS_DELTA_LATCH2_NAND_CLE | AMS_DELTA_LATCH2_NAND_ALE | AMS_DELTA_LATCH2_NAND_NCE | AMS_DELTA_LATCH2_NAND_NWP) + +/* + * Define partitions for flash devices + */ + +static struct mtd_partition partition_info[] = { + { .name = "Kernel", + .offset = 0, + .size = 3 * SZ_1M + SZ_512K }, + { .name = "u-boot", + .offset = 3 * SZ_1M + SZ_512K, + .size = SZ_256K }, + { .name = "u-boot params", + .offset = 3 * SZ_1M + SZ_512K + SZ_256K, + .size = SZ_256K }, + { .name = "Amstrad LDR", + .offset = 4 * SZ_1M, + .size = SZ_256K }, + { .name = "File system", + .offset = 4 * SZ_1M + 1 * SZ_256K, + .size = 27 * SZ_1M }, + { .name = "PBL reserved", + .offset = 32 * SZ_1M - 3 * SZ_256K, + .size = 3 * SZ_256K }, +}; + +static void ams_delta_write_byte(struct mtd_info *mtd, u_char byte) +{ + struct nand_chip *this = mtd->priv; + + omap_writew(0, (OMAP_MPUIO_BASE + OMAP_MPUIO_IO_CNTL)); + omap_writew(byte, this->IO_ADDR_W); + ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NWE, 0); + ndelay(40); + ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NWE, + AMS_DELTA_LATCH2_NAND_NWE); +} + +static u_char ams_delta_read_byte(struct mtd_info *mtd) +{ + u_char res; + struct nand_chip *this = mtd->priv; + + ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NRE, 0); + ndelay(40); + omap_writew(~0, (OMAP_MPUIO_BASE + OMAP_MPUIO_IO_CNTL)); + res = omap_readw(this->IO_ADDR_R); + ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NRE, + AMS_DELTA_LATCH2_NAND_NRE); + + return res; +} + +static void ams_delta_write_buf(struct mtd_info *mtd, const u_char *buf, + int len) +{ + int i; + + for (i=0; i bit 2 + * NAND_CLE: bit 1 -> bit 7 + * NAND_ALE: bit 2 -> bit 6 + */ +static void ams_delta_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + + if (ctrl & NAND_CTRL_CHANGE) { + unsigned long bits; + + bits = (~ctrl & NAND_NCE) << 2; + bits |= (ctrl & NAND_CLE) << 7; + bits |= (ctrl & NAND_ALE) << 6; + + ams_delta_latch2_write(0xC2, bits); + } + + if (cmd != NAND_CMD_NONE) + ams_delta_write_byte(mtd, cmd); +} + +static int ams_delta_nand_ready(struct mtd_info *mtd) +{ + return omap_get_gpio_datain(AMS_DELTA_GPIO_PIN_NAND_RB); +} + +/* + * Main initialization routine + */ +static int __init ams_delta_init(void) +{ + struct nand_chip *this; + int err = 0; + + /* Allocate memory for MTD device structure and private data */ + ams_delta_mtd = kmalloc(sizeof(struct mtd_info) + + sizeof(struct nand_chip), GFP_KERNEL); + if (!ams_delta_mtd) { + printk (KERN_WARNING "Unable to allocate E3 NAND MTD device structure.\n"); + err = -ENOMEM; + goto out; + } + + ams_delta_mtd->owner = THIS_MODULE; + + /* Get pointer to private data */ + this = (struct nand_chip *) (&ams_delta_mtd[1]); + + /* Initialize structures */ + memset(ams_delta_mtd, 0, sizeof(struct mtd_info)); + memset(this, 0, sizeof(struct nand_chip)); + + /* Link the private data with the MTD structure */ + ams_delta_mtd->priv = this; + + /* Set address of NAND IO lines */ + this->IO_ADDR_R = (OMAP_MPUIO_BASE + OMAP_MPUIO_INPUT_LATCH); + this->IO_ADDR_W = (OMAP_MPUIO_BASE + OMAP_MPUIO_OUTPUT); + this->read_byte = ams_delta_read_byte; + this->write_buf = ams_delta_write_buf; + this->read_buf = ams_delta_read_buf; + this->verify_buf = ams_delta_verify_buf; + this->cmd_ctrl = ams_delta_hwcontrol; + if (!omap_request_gpio(AMS_DELTA_GPIO_PIN_NAND_RB)) { + this->dev_ready = ams_delta_nand_ready; + } else { + this->dev_ready = NULL; + printk(KERN_NOTICE "Couldn't request gpio for Delta NAND ready.\n"); + } + /* 25 us command delay time */ + this->chip_delay = 30; + this->ecc.mode = NAND_ECC_SOFT; + + /* Set chip enabled, but */ + ams_delta_latch2_write(NAND_MASK, AMS_DELTA_LATCH2_NAND_NRE | + AMS_DELTA_LATCH2_NAND_NWE | + AMS_DELTA_LATCH2_NAND_NCE | + AMS_DELTA_LATCH2_NAND_NWP); + + /* Scan to find existance of the device */ + if (nand_scan(ams_delta_mtd, 1)) { + err = -ENXIO; + goto out_mtd; + } + + /* Register the partitions */ + add_mtd_partitions(ams_delta_mtd, partition_info, + ARRAY_SIZE(partition_info)); + + goto out; + + out_mtd: + kfree(ams_delta_mtd); + out: + return err; +} + +module_init(ams_delta_init); + +/* + * Clean up routine + */ +static void __exit ams_delta_cleanup(void) +{ + /* Release resources, unregister device */ + nand_release(ams_delta_mtd); + + /* Free the MTD device structure */ + kfree(ams_delta_mtd); +} +module_exit(ams_delta_cleanup); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jonathan McDowell "); +MODULE_DESCRIPTION("Glue layer for NAND flash on Amstrad E3 (Delta)"); diff -puN drivers/mtd/nand/au1550nd.c~git-mtd drivers/mtd/nand/au1550nd.c --- devel/drivers/mtd/nand/au1550nd.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/nand/au1550nd.c 2006-05-29 15:02:34.000000000 -0700 @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -38,22 +39,21 @@ */ static struct mtd_info *au1550_mtd = NULL; static void __iomem *p_nand; -static int nand_width = 1; /* default x8*/ +static int nand_width = 1; /* default x8 */ +static void (*au1550_write_byte)(struct mtd_info *, u_char); /* * Define partitions for flash device */ static const struct mtd_partition partition_info[] = { { - .name = "NAND FS 0", - .offset = 0, - .size = 8*1024*1024 - }, + .name = "NAND FS 0", + .offset = 0, + .size = 8 * 1024 * 1024}, { - .name = "NAND FS 1", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL - } + .name = "NAND FS 1", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL} }; /** @@ -130,21 +130,6 @@ static u16 au_read_word(struct mtd_info } /** - * au_write_word - write one word to the chip - * @mtd: MTD device structure - * @word: data word to write - * - * write function for 16bit buswith without - * endianess conversion - */ -static void au_write_word(struct mtd_info *mtd, u16 word) -{ - struct nand_chip *this = mtd->priv; - writew(word, this->IO_ADDR_W); - au_sync(); -} - -/** * au_write_buf - write buffer to chip * @mtd: MTD device structure * @buf: data buffer @@ -157,7 +142,7 @@ static void au_write_buf(struct mtd_info int i; struct nand_chip *this = mtd->priv; - for (i=0; iIO_ADDR_W); au_sync(); } @@ -176,7 +161,7 @@ static void au_read_buf(struct mtd_info int i; struct nand_chip *this = mtd->priv; - for (i=0; iIO_ADDR_R); au_sync(); } @@ -195,7 +180,7 @@ static int au_verify_buf(struct mtd_info int i; struct nand_chip *this = mtd->priv; - for (i=0; iIO_ADDR_R)) return -EFAULT; au_sync(); @@ -219,7 +204,7 @@ static void au_write_buf16(struct mtd_in u16 *p = (u16 *) buf; len >>= 1; - for (i=0; iIO_ADDR_W); au_sync(); } @@ -241,7 +226,7 @@ static void au_read_buf16(struct mtd_inf u16 *p = (u16 *) buf; len >>= 1; - for (i=0; iIO_ADDR_R); au_sync(); } @@ -262,7 +247,7 @@ static int au_verify_buf16(struct mtd_in u16 *p = (u16 *) buf; len >>= 1; - for (i=0; iIO_ADDR_R)) return -EFAULT; au_sync(); @@ -270,32 +255,52 @@ static int au_verify_buf16(struct mtd_in return 0; } +/* Select the chip by setting nCE to low */ +#define NAND_CTL_SETNCE 1 +/* Deselect the chip by setting nCE to high */ +#define NAND_CTL_CLRNCE 2 +/* Select the command latch by setting CLE to high */ +#define NAND_CTL_SETCLE 3 +/* Deselect the command latch by setting CLE to low */ +#define NAND_CTL_CLRCLE 4 +/* Select the address latch by setting ALE to high */ +#define NAND_CTL_SETALE 5 +/* Deselect the address latch by setting ALE to low */ +#define NAND_CTL_CLRALE 6 static void au1550_hwcontrol(struct mtd_info *mtd, int cmd) { register struct nand_chip *this = mtd->priv; - switch(cmd){ + switch (cmd) { - case NAND_CTL_SETCLE: this->IO_ADDR_W = p_nand + MEM_STNAND_CMD; break; - case NAND_CTL_CLRCLE: this->IO_ADDR_W = p_nand + MEM_STNAND_DATA; break; + case NAND_CTL_SETCLE: + this->IO_ADDR_W = p_nand + MEM_STNAND_CMD; + break; + + case NAND_CTL_CLRCLE: + this->IO_ADDR_W = p_nand + MEM_STNAND_DATA; + break; + + case NAND_CTL_SETALE: + this->IO_ADDR_W = p_nand + MEM_STNAND_ADDR; + break; - case NAND_CTL_SETALE: this->IO_ADDR_W = p_nand + MEM_STNAND_ADDR; break; case NAND_CTL_CLRALE: this->IO_ADDR_W = p_nand + MEM_STNAND_DATA; - /* FIXME: Nobody knows why this is neccecary, + /* FIXME: Nobody knows why this is necessary, * but it works only that way */ udelay(1); break; case NAND_CTL_SETNCE: /* assert (force assert) chip enable */ - au_writel((1<<(4+NAND_CS)) , MEM_STNDCTL); break; + au_writel((1 << (4 + NAND_CS)), MEM_STNDCTL); break; case NAND_CTL_CLRNCE: - /* deassert chip enable */ - au_writel(0, MEM_STNDCTL); break; + /* deassert chip enable */ + au_writel(0, MEM_STNDCTL); break; } @@ -312,69 +317,200 @@ int au1550_device_ready(struct mtd_info return ret; } +/** + * au1550_select_chip - control -CE line + * Forbid driving -CE manually permitting the NAND controller to do this. + * Keeping -CE asserted during the whole sector reads interferes with the + * NOR flash and PCMCIA drivers as it causes contention on the static bus. + * We only have to hold -CE low for the NAND read commands since the flash + * chip needs it to be asserted during chip not ready time but the NAND + * controller keeps it released. + * + * @mtd: MTD device structure + * @chip: chipnumber to select, -1 for deselect + */ +static void au1550_select_chip(struct mtd_info *mtd, int chip) +{ +} + +/** + * au1550_command - Send command to NAND device + * @mtd: MTD device structure + * @command: the command to be sent + * @column: the column address for this command, -1 if none + * @page_addr: the page address for this command, -1 if none + */ +static void au1550_command(struct mtd_info *mtd, unsigned command, int column, int page_addr) +{ + register struct nand_chip *this = mtd->priv; + int ce_override = 0, i; + ulong flags; + + /* Begin command latch cycle */ + au1550_hwcontrol(mtd, NAND_CTL_SETCLE); + /* + * Write out the command to the device. + */ + if (command == NAND_CMD_SEQIN) { + int readcmd; + + if (column >= mtd->writesize) { + /* OOB area */ + column -= mtd->writesize; + readcmd = NAND_CMD_READOOB; + } else if (column < 256) { + /* First 256 bytes --> READ0 */ + readcmd = NAND_CMD_READ0; + } else { + column -= 256; + readcmd = NAND_CMD_READ1; + } + au1550_write_byte(mtd, readcmd); + } + au1550_write_byte(mtd, command); + + /* Set ALE and clear CLE to start address cycle */ + au1550_hwcontrol(mtd, NAND_CTL_CLRCLE); + + if (column != -1 || page_addr != -1) { + au1550_hwcontrol(mtd, NAND_CTL_SETALE); + + /* Serially input address */ + if (column != -1) { + /* Adjust columns for 16 bit buswidth */ + if (this->options & NAND_BUSWIDTH_16) + column >>= 1; + au1550_write_byte(mtd, column); + } + if (page_addr != -1) { + au1550_write_byte(mtd, (u8)(page_addr & 0xff)); + + if (command == NAND_CMD_READ0 || + command == NAND_CMD_READ1 || + command == NAND_CMD_READOOB) { + /* + * NAND controller will release -CE after + * the last address byte is written, so we'll + * have to forcibly assert it. No interrupts + * are allowed while we do this as we don't + * want the NOR flash or PCMCIA drivers to + * steal our precious bytes of data... + */ + ce_override = 1; + local_irq_save(flags); + au1550_hwcontrol(mtd, NAND_CTL_SETNCE); + } + + au1550_write_byte(mtd, (u8)(page_addr >> 8)); + + /* One more address cycle for devices > 32MiB */ + if (this->chipsize > (32 << 20)) + au1550_write_byte(mtd, (u8)((page_addr >> 16) & 0x0f)); + } + /* Latch in address */ + au1550_hwcontrol(mtd, NAND_CTL_CLRALE); + } + + /* + * Program and erase have their own busy handlers. + * Status and sequential in need no delay. + */ + switch (command) { + + case NAND_CMD_PAGEPROG: + case NAND_CMD_ERASE1: + case NAND_CMD_ERASE2: + case NAND_CMD_SEQIN: + case NAND_CMD_STATUS: + return; + + case NAND_CMD_RESET: + break; + + case NAND_CMD_READ0: + case NAND_CMD_READ1: + case NAND_CMD_READOOB: + /* Check if we're really driving -CE low (just in case) */ + if (unlikely(!ce_override)) + break; + + /* Apply a short delay always to ensure that we do wait tWB. */ + ndelay(100); + /* Wait for a chip to become ready... */ + for (i = this->chip_delay; !this->dev_ready(mtd) && i > 0; --i) + udelay(1); + + /* Release -CE and re-enable interrupts. */ + au1550_hwcontrol(mtd, NAND_CTL_CLRNCE); + local_irq_restore(flags); + return; + } + /* Apply this short delay always to ensure that we do wait tWB. */ + ndelay(100); + + while(!this->dev_ready(mtd)); +} + + /* * Main initialization routine */ -int __init au1xxx_nand_init (void) +static int __init au1xxx_nand_init(void) { struct nand_chip *this; - u16 boot_swapboot = 0; /* default value */ + u16 boot_swapboot = 0; /* default value */ int retval; u32 mem_staddr; u32 nand_phys; /* Allocate memory for MTD device structure and private data */ - au1550_mtd = kmalloc (sizeof(struct mtd_info) + - sizeof (struct nand_chip), GFP_KERNEL); + au1550_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); if (!au1550_mtd) { - printk ("Unable to allocate NAND MTD dev structure.\n"); + printk("Unable to allocate NAND MTD dev structure.\n"); return -ENOMEM; } /* Get pointer to private data */ - this = (struct nand_chip *) (&au1550_mtd[1]); + this = (struct nand_chip *)(&au1550_mtd[1]); /* Initialize structures */ - memset((char *) au1550_mtd, 0, sizeof(struct mtd_info)); - memset((char *) this, 0, sizeof(struct nand_chip)); + memset(au1550_mtd, 0, sizeof(struct mtd_info)); + memset(this, 0, sizeof(struct nand_chip)); /* Link the private data with the MTD structure */ au1550_mtd->priv = this; + au1550_mtd->owner = THIS_MODULE; - /* disable interrupts */ - au_writel(au_readl(MEM_STNDCTL) & ~(1<<8), MEM_STNDCTL); - - /* disable NAND boot */ - au_writel(au_readl(MEM_STNDCTL) & ~(1<<0), MEM_STNDCTL); + /* MEM_STNDCTL: disable ints, disable nand boot */ + au_writel(0, MEM_STNDCTL); #ifdef CONFIG_MIPS_PB1550 /* set gpio206 high */ - au_writel(au_readl(GPIO2_DIR) & ~(1<<6), GPIO2_DIR); + au_writel(au_readl(GPIO2_DIR) & ~(1 << 6), GPIO2_DIR); - boot_swapboot = (au_readl(MEM_STSTAT) & (0x7<<1)) | - ((bcsr->status >> 6) & 0x1); + boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | ((bcsr->status >> 6) & 0x1); switch (boot_swapboot) { - case 0: - case 2: - case 8: - case 0xC: - case 0xD: - /* x16 NAND Flash */ - nand_width = 0; - break; - case 1: - case 9: - case 3: - case 0xE: - case 0xF: - /* x8 NAND Flash */ - nand_width = 1; - break; - default: - printk("Pb1550 NAND: bad boot:swap\n"); - retval = -EINVAL; - goto outmem; + case 0: + case 2: + case 8: + case 0xC: + case 0xD: + /* x16 NAND Flash */ + nand_width = 0; + break; + case 1: + case 9: + case 3: + case 0xE: + case 0xF: + /* x8 NAND Flash */ + nand_width = 1; + break; + default: + printk("Pb1550 NAND: bad boot:swap\n"); + retval = -EINVAL; + goto outmem; } #endif @@ -424,21 +560,22 @@ int __init au1xxx_nand_init (void) /* make controller and MTD agree */ if (NAND_CS == 0) - nand_width = au_readl(MEM_STCFG0) & (1<<22); + nand_width = au_readl(MEM_STCFG0) & (1 << 22); if (NAND_CS == 1) - nand_width = au_readl(MEM_STCFG1) & (1<<22); + nand_width = au_readl(MEM_STCFG1) & (1 << 22); if (NAND_CS == 2) - nand_width = au_readl(MEM_STCFG2) & (1<<22); + nand_width = au_readl(MEM_STCFG2) & (1 << 22); if (NAND_CS == 3) - nand_width = au_readl(MEM_STCFG3) & (1<<22); - + nand_width = au_readl(MEM_STCFG3) & (1 << 22); /* Set address of hardware control function */ - this->hwcontrol = au1550_hwcontrol; this->dev_ready = au1550_device_ready; + this->select_chip = au1550_select_chip; + this->cmdfunc = au1550_command; + /* 30 us command delay time */ this->chip_delay = 30; - this->eccmode = NAND_ECC_SOFT; + this->ecc.mode = NAND_ECC_SOFT; this->options = NAND_NO_AUTOINCR; @@ -446,15 +583,14 @@ int __init au1xxx_nand_init (void) this->options |= NAND_BUSWIDTH_16; this->read_byte = (!nand_width) ? au_read_byte16 : au_read_byte; - this->write_byte = (!nand_width) ? au_write_byte16 : au_write_byte; - this->write_word = au_write_word; + au1550_write_byte = (!nand_width) ? au_write_byte16 : au_write_byte; this->read_word = au_read_word; this->write_buf = (!nand_width) ? au_write_buf16 : au_write_buf; this->read_buf = (!nand_width) ? au_read_buf16 : au_read_buf; this->verify_buf = (!nand_width) ? au_verify_buf16 : au_verify_buf; /* Scan to find existence of the device */ - if (nand_scan (au1550_mtd, 1)) { + if (nand_scan(au1550_mtd, 1)) { retval = -ENXIO; goto outio; } @@ -465,10 +601,10 @@ int __init au1xxx_nand_init (void) return 0; outio: - iounmap ((void *)p_nand); + iounmap((void *)p_nand); outmem: - kfree (au1550_mtd); + kfree(au1550_mtd); return retval; } @@ -477,22 +613,21 @@ module_init(au1xxx_nand_init); /* * Clean up routine */ -#ifdef MODULE -static void __exit au1550_cleanup (void) +static void __exit au1550_cleanup(void) { - struct nand_chip *this = (struct nand_chip *) &au1550_mtd[1]; + struct nand_chip *this = (struct nand_chip *)&au1550_mtd[1]; /* Release resources, unregister device */ - nand_release (au1550_mtd); + nand_release(au1550_mtd); /* Free the MTD device structure */ - kfree (au1550_mtd); + kfree(au1550_mtd); /* Unmap */ - iounmap ((void *)p_nand); + iounmap((void *)p_nand); } + module_exit(au1550_cleanup); -#endif MODULE_LICENSE("GPL"); MODULE_AUTHOR("Embedded Edge, LLC"); diff -puN drivers/mtd/nand/autcpu12.c~git-mtd drivers/mtd/nand/autcpu12.c --- devel/drivers/mtd/nand/autcpu12.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/nand/autcpu12.c 2006-05-29 15:02:34.000000000 -0700 @@ -4,7 +4,7 @@ * Copyright (c) 2002 Thomas Gleixner * * Derived from drivers/mtd/spia.c - * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) + * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) * * $Id: autcpu12.c,v 1.23 2005/11/07 11:14:30 gleixner Exp $ * @@ -42,12 +42,7 @@ * MTD structure for AUTCPU12 board */ static struct mtd_info *autcpu12_mtd = NULL; - -static int autcpu12_io_base = CS89712_VIRT_BASE; -static int autcpu12_fio_pbase = AUTCPU12_PHYS_SMC; -static int autcpu12_fio_ctrl = AUTCPU12_SMC_SELECT_OFFSET; -static int autcpu12_pedr = AUTCPU12_SMC_PORT_OFFSET; -static void __iomem * autcpu12_fio_base; +static void __iomem *autcpu12_fio_base; /* * Define partitions for flash devices @@ -94,108 +89,131 @@ static struct mtd_partition partition_in #define NUM_PARTITIONS128K 2 /* * hardware specific access to control-lines -*/ -static void autcpu12_hwcontrol(struct mtd_info *mtd, int cmd) + * + * ALE bit 4 autcpu12_pedr + * CLE bit 5 autcpu12_pedr + * NCE bit 0 fio_ctrl + * + */ +static void autcpu12_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int ctrl) { + struct nand_chip *chip = mtd->priv; - switch(cmd){ - - case NAND_CTL_SETCLE: (*(volatile unsigned char *) (autcpu12_io_base + autcpu12_pedr)) |= AUTCPU12_SMC_CLE; break; - case NAND_CTL_CLRCLE: (*(volatile unsigned char *) (autcpu12_io_base + autcpu12_pedr)) &= ~AUTCPU12_SMC_CLE; break; - - case NAND_CTL_SETALE: (*(volatile unsigned char *) (autcpu12_io_base + autcpu12_pedr)) |= AUTCPU12_SMC_ALE; break; - case NAND_CTL_CLRALE: (*(volatile unsigned char *) (autcpu12_io_base + autcpu12_pedr)) &= ~AUTCPU12_SMC_ALE; break; + if (ctrl & NAND_CTRL_CHANGE) { + void __iomem *addr + unsigned char bits; + + addr = CS89712_VIRT_BASE + AUTCPU12_SMC_PORT_OFFSET; + bits = (ctrl & NAND_CLE) << 4; + bits |= (ctrl & NAND_ALE) << 2; + writeb((readb(addr) & ~0x30) | bits, addr); - case NAND_CTL_SETNCE: (*(volatile unsigned char *) (autcpu12_fio_base + autcpu12_fio_ctrl)) = 0x01; break; - case NAND_CTL_CLRNCE: (*(volatile unsigned char *) (autcpu12_fio_base + autcpu12_fio_ctrl)) = 0x00; break; + addr = autcpu12_fio_base + AUTCPU12_SMC_SELECT_OFFSET; + writeb((readb(addr) & ~0x1) | (ctrl & NAND_NCE), addr); } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, chip->IO_ADDR_W); } /* -* read device ready pin -*/ + * read device ready pin + */ int autcpu12_device_ready(struct mtd_info *mtd) { + void __iomem *addr = CS89712_VIRT_BASE + AUTCPU12_SMC_PORT_OFFSET; - return ( (*(volatile unsigned char *) (autcpu12_io_base + autcpu12_pedr)) & AUTCPU12_SMC_RDY) ? 1 : 0; - + return readb(addr) & AUTCPU12_SMC_RDY; } /* * Main initialization routine */ -int __init autcpu12_init (void) +static int __init autcpu12_init(void) { struct nand_chip *this; int err = 0; /* Allocate memory for MTD device structure and private data */ - autcpu12_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip), - GFP_KERNEL); + autcpu12_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), + GFP_KERNEL); if (!autcpu12_mtd) { - printk ("Unable to allocate AUTCPU12 NAND MTD device structure.\n"); + printk("Unable to allocate AUTCPU12 NAND MTD device structure.\n"); err = -ENOMEM; goto out; } /* map physical adress */ - autcpu12_fio_base = ioremap(autcpu12_fio_pbase,SZ_1K); - if(!autcpu12_fio_base){ + autcpu12_fio_base = ioremap(AUTCPU12_PHYS_SMC, SZ_1K); + if (!autcpu12_fio_base) { printk("Ioremap autcpu12 SmartMedia Card failed\n"); err = -EIO; goto out_mtd; } /* Get pointer to private data */ - this = (struct nand_chip *) (&autcpu12_mtd[1]); + this = (struct nand_chip *)(&autcpu12_mtd[1]); /* Initialize structures */ - memset((char *) autcpu12_mtd, 0, sizeof(struct mtd_info)); - memset((char *) this, 0, sizeof(struct nand_chip)); + memset(autcpu12_mtd, 0, sizeof(struct mtd_info)); + memset(this, 0, sizeof(struct nand_chip)); /* Link the private data with the MTD structure */ autcpu12_mtd->priv = this; + autcpu12_mtd->owner = THIS_MODULE; /* Set address of NAND IO lines */ this->IO_ADDR_R = autcpu12_fio_base; this->IO_ADDR_W = autcpu12_fio_base; - this->hwcontrol = autcpu12_hwcontrol; + this->cmd_ctrl = autcpu12_hwcontrol; this->dev_ready = autcpu12_device_ready; /* 20 us command delay time */ this->chip_delay = 20; - this->eccmode = NAND_ECC_SOFT; + this->ecc.mode = NAND_ECC_SOFT; /* Enable the following for a flash based bad block table */ /* - this->options = NAND_USE_FLASH_BBT; - */ + this->options = NAND_USE_FLASH_BBT; + */ this->options = NAND_USE_FLASH_BBT; /* Scan to find existance of the device */ - if (nand_scan (autcpu12_mtd, 1)) { + if (nand_scan(autcpu12_mtd, 1)) { err = -ENXIO; goto out_ior; } /* Register the partitions */ - switch(autcpu12_mtd->size){ - case SZ_16M: add_mtd_partitions(autcpu12_mtd, partition_info16k, NUM_PARTITIONS16K); break; - case SZ_32M: add_mtd_partitions(autcpu12_mtd, partition_info32k, NUM_PARTITIONS32K); break; - case SZ_64M: add_mtd_partitions(autcpu12_mtd, partition_info64k, NUM_PARTITIONS64K); break; - case SZ_128M: add_mtd_partitions(autcpu12_mtd, partition_info128k, NUM_PARTITIONS128K); break; - default: { - printk ("Unsupported SmartMedia device\n"); + switch (autcpu12_mtd->size) { + case SZ_16M: + add_mtd_partitions(autcpu12_mtd, partition_info16k, + NUM_PARTITIONS16K); + break; + case SZ_32M: + add_mtd_partitions(autcpu12_mtd, partition_info32k, + NUM_PARTITIONS32K); + break; + case SZ_64M: + add_mtd_partitions(autcpu12_mtd, partition_info64k, + NUM_PARTITIONS64K); + break; + case SZ_128M: + add_mtd_partitions(autcpu12_mtd, partition_info128k, + NUM_PARTITIONS128K); + break; + default: + printk("Unsupported SmartMedia device\n"); err = -ENXIO; goto out_ior; - } } goto out; -out_ior: - iounmap((void *)autcpu12_fio_base); -out_mtd: - kfree (autcpu12_mtd); -out: + out_ior: + iounmap(autcpu12_fio_base); + out_mtd: + kfree(autcpu12_mtd); + out: return err; } @@ -204,20 +222,19 @@ module_init(autcpu12_init); /* * Clean up routine */ -#ifdef MODULE -static void __exit autcpu12_cleanup (void) +static void __exit autcpu12_cleanup(void) { /* Release resources, unregister device */ - nand_release (autcpu12_mtd); + nand_release(autcpu12_mtd); /* unmap physical adress */ - iounmap((void *)autcpu12_fio_base); + iounmap(autcpu12_fio_base); /* Free the MTD device structure */ - kfree (autcpu12_mtd); + kfree(autcpu12_mtd); } + module_exit(autcpu12_cleanup); -#endif MODULE_LICENSE("GPL"); MODULE_AUTHOR("Thomas Gleixner "); diff -puN /dev/null drivers/mtd/nand/cs553x_nand.c --- /dev/null 2006-05-29 10:18:53.280907750 -0700 +++ devel-akpm/drivers/mtd/nand/cs553x_nand.c 2006-05-29 15:02:34.000000000 -0700 @@ -0,0 +1,353 @@ +/* + * drivers/mtd/nand/cs553x_nand.c + * + * (C) 2005, 2006 Red Hat Inc. + * + * Author: David Woodhouse + * Tom Sylla + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Overview: + * This is a device driver for the NAND flash controller found on + * the AMD CS5535/CS5536 companion chipsets for the Geode processor. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define NR_CS553X_CONTROLLERS 4 + +#define MSR_DIVIL_GLD_CAP 0x51400000 /* DIVIL capabilitiies */ +#define CAP_CS5535 0x2df000ULL +#define CAP_CS5536 0x5df500ULL + +/* NAND Timing MSRs */ +#define MSR_NANDF_DATA 0x5140001b /* NAND Flash Data Timing MSR */ +#define MSR_NANDF_CTL 0x5140001c /* NAND Flash Control Timing */ +#define MSR_NANDF_RSVD 0x5140001d /* Reserved */ + +/* NAND BAR MSRs */ +#define MSR_DIVIL_LBAR_FLSH0 0x51400010 /* Flash Chip Select 0 */ +#define MSR_DIVIL_LBAR_FLSH1 0x51400011 /* Flash Chip Select 1 */ +#define MSR_DIVIL_LBAR_FLSH2 0x51400012 /* Flash Chip Select 2 */ +#define MSR_DIVIL_LBAR_FLSH3 0x51400013 /* Flash Chip Select 3 */ + /* Each made up of... */ +#define FLSH_LBAR_EN (1ULL<<32) +#define FLSH_NOR_NAND (1ULL<<33) /* 1 for NAND */ +#define FLSH_MEM_IO (1ULL<<34) /* 1 for MMIO */ + /* I/O BARs have BASE_ADDR in bits 15:4, IO_MASK in 47:36 */ + /* MMIO BARs have BASE_ADDR in bits 31:12, MEM_MASK in 63:44 */ + +/* Pin function selection MSR (IDE vs. flash on the IDE pins) */ +#define MSR_DIVIL_BALL_OPTS 0x51400015 +#define PIN_OPT_IDE (1<<0) /* 0 for flash, 1 for IDE */ + +/* Registers within the NAND flash controller BAR -- memory mapped */ +#define MM_NAND_DATA 0x00 /* 0 to 0x7ff, in fact */ +#define MM_NAND_CTL 0x800 /* Any even address 0x800-0x80e */ +#define MM_NAND_IO 0x801 /* Any odd address 0x801-0x80f */ +#define MM_NAND_STS 0x810 +#define MM_NAND_ECC_LSB 0x811 +#define MM_NAND_ECC_MSB 0x812 +#define MM_NAND_ECC_COL 0x813 +#define MM_NAND_LAC 0x814 +#define MM_NAND_ECC_CTL 0x815 + +/* Registers within the NAND flash controller BAR -- I/O mapped */ +#define IO_NAND_DATA 0x00 /* 0 to 3, in fact */ +#define IO_NAND_CTL 0x04 +#define IO_NAND_IO 0x05 +#define IO_NAND_STS 0x06 +#define IO_NAND_ECC_CTL 0x08 +#define IO_NAND_ECC_LSB 0x09 +#define IO_NAND_ECC_MSB 0x0a +#define IO_NAND_ECC_COL 0x0b +#define IO_NAND_LAC 0x0c + +#define CS_NAND_CTL_DIST_EN (1<<4) /* Enable NAND Distract interrupt */ +#define CS_NAND_CTL_RDY_INT_MASK (1<<3) /* Enable RDY/BUSY# interrupt */ +#define CS_NAND_CTL_ALE (1<<2) +#define CS_NAND_CTL_CLE (1<<1) +#define CS_NAND_CTL_CE (1<<0) /* Keep low; 1 to reset */ + +#define CS_NAND_STS_FLASH_RDY (1<<3) +#define CS_NAND_CTLR_BUSY (1<<2) +#define CS_NAND_CMD_COMP (1<<1) +#define CS_NAND_DIST_ST (1<<0) + +#define CS_NAND_ECC_PARITY (1<<2) +#define CS_NAND_ECC_CLRECC (1<<1) +#define CS_NAND_ECC_ENECC (1<<0) + +static void cs553x_read_buf(struct mtd_info *mtd, u_char *buf, int len) +{ + struct nand_chip *this = mtd->priv; + + while (unlikely(len > 0x800)) { + memcpy_fromio(buf, this->IO_ADDR_R, 0x800); + buf += 0x800; + len -= 0x800; + } + memcpy_fromio(buf, this->IO_ADDR_R, len); +} + +static void cs553x_write_buf(struct mtd_info *mtd, const u_char *buf, int len) +{ + struct nand_chip *this = mtd->priv; + + while (unlikely(len > 0x800)) { + memcpy_toio(this->IO_ADDR_R, buf, 0x800); + buf += 0x800; + len -= 0x800; + } + memcpy_toio(this->IO_ADDR_R, buf, len); +} + +static unsigned char cs553x_read_byte(struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + return readb(this->IO_ADDR_R); +} + +static void cs553x_write_byte(struct mtd_info *mtd, u_char byte) +{ + struct nand_chip *this = mtd->priv; + int i = 100000; + + while (i && readb(this->IO_ADDR_R + MM_NAND_STS) & CS_NAND_CTLR_BUSY) { + udelay(1); + i--; + } + writeb(byte, this->IO_ADDR_W + 0x801); +} + +static void cs553x_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + void __iomem *mmio_base = this->IO_ADDR_R; + if (ctrl & NAND_CTRL_CHANGE) { + unsigned char ctl = (ctrl & ~NAND_CTRL_CHANGE ) ^ 0x01; + writeb(ctl, mmio_base + MM_NAND_CTL); + } + if (cmd != NAND_CMD_NONE) + cs553x_write_byte(mtd, cmd); +} + +static int cs553x_device_ready(struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + void __iomem *mmio_base = this->IO_ADDR_R; + unsigned char foo = readb(mmio_base + MM_NAND_STS); + + return (foo & CS_NAND_STS_FLASH_RDY) && !(foo & CS_NAND_CTLR_BUSY); +} + +static void cs_enable_hwecc(struct mtd_info *mtd, int mode) +{ + struct nand_chip *this = mtd->priv; + void __iomem *mmio_base = this->IO_ADDR_R; + + writeb(0x07, mmio_base + MM_NAND_ECC_CTL); +} + +static int cs_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) +{ + uint32_t ecc; + struct nand_chip *this = mtd->priv; + void __iomem *mmio_base = this->IO_ADDR_R; + + ecc = readl(mmio_base + MM_NAND_STS); + + ecc_code[1] = ecc >> 8; + ecc_code[0] = ecc >> 16; + ecc_code[2] = ecc >> 24; + return 0; +} + +static struct mtd_info *cs553x_mtd[4]; + +static int __init cs553x_init_one(int cs, int mmio, unsigned long adr) +{ + int err = 0; + struct nand_chip *this; + struct mtd_info *new_mtd; + + printk(KERN_NOTICE "Probing CS553x NAND controller CS#%d at %sIO 0x%08lx\n", cs, mmio?"MM":"P", adr); + + if (!mmio) { + printk(KERN_NOTICE "PIO mode not yet implemented for CS553X NAND controller\n"); + return -ENXIO; + } + + /* Allocate memory for MTD device structure and private data */ + new_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); + if (!new_mtd) { + printk(KERN_WARNING "Unable to allocate CS553X NAND MTD device structure.\n"); + err = -ENOMEM; + goto out; + } + + /* Get pointer to private data */ + this = (struct nand_chip *)(&new_mtd[1]); + + /* Initialize structures */ + memset(new_mtd, 0, sizeof(struct mtd_info)); + memset(this, 0, sizeof(struct nand_chip)); + + /* Link the private data with the MTD structure */ + new_mtd->priv = this; + new_mtd->owner = THIS_MODULE; + + /* map physical address */ + this->IO_ADDR_R = this->IO_ADDR_W = ioremap(adr, 4096); + if (!this->IO_ADDR_R) { + printk(KERN_WARNING "ioremap cs553x NAND @0x%08lx failed\n", adr); + err = -EIO; + goto out_mtd; + } + + this->cmd_ctrl = cs553x_hwcontrol; + this->dev_ready = cs553x_device_ready; + this->read_byte = cs553x_read_byte; + this->read_buf = cs553x_read_buf; + this->write_buf = cs553x_write_buf; + + this->chip_delay = 0; + + this->ecc.mode = NAND_ECC_HW; + this->ecc.size = 256; + this->ecc.bytes = 3; + this->ecc.hwctl = cs_enable_hwecc; + this->ecc.calculate = cs_calculate_ecc; + this->ecc.correct = nand_correct_data; + + /* Enable the following for a flash based bad block table */ + this->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR; + + /* Scan to find existance of the device */ + if (nand_scan(new_mtd, 1)) { + err = -ENXIO; + goto out_ior; + } + + cs553x_mtd[cs] = new_mtd; + goto out; + +out_ior: + iounmap((void *)this->IO_ADDR_R); +out_mtd: + kfree(new_mtd); +out: + return err; +} + +static int is_geode(void) +{ + /* These are the CPUs which will have a CS553[56] companion chip */ + if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD && + boot_cpu_data.x86 == 5 && + boot_cpu_data.x86_model == 10) + return 1; /* Geode LX */ + + if ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC || + boot_cpu_data.x86_vendor == X86_VENDOR_CYRIX) && + boot_cpu_data.x86 == 5 && + boot_cpu_data.x86_model == 5) + return 1; /* Geode GX (née GX2) */ + + return 0; +} + +static int __init cs553x_init(void) +{ + int err = -ENXIO; + int i; + uint64_t val; + + /* If the CPU isn't a Geode GX or LX, abort */ + if (!is_geode()) + return -ENXIO; + + /* If it doesn't have the CS553[56], abort */ + rdmsrl(MSR_DIVIL_GLD_CAP, val); + val &= ~0xFFULL; + if (val != CAP_CS5535 && val != CAP_CS5536) + return -ENXIO; + + /* If it doesn't have the NAND controller enabled, abort */ + rdmsrl(MSR_DIVIL_BALL_OPTS, val); + if (val & 1) { + printk(KERN_INFO "CS553x NAND controller: Flash I/O not enabled in MSR_DIVIL_BALL_OPTS.\n"); + return -ENXIO; + } + + for (i = 0; i < NR_CS553X_CONTROLLERS; i++) { + rdmsrl(MSR_DIVIL_LBAR_FLSH0 + i, val); + + if ((val & (FLSH_LBAR_EN|FLSH_NOR_NAND)) == (FLSH_LBAR_EN|FLSH_NOR_NAND)) + err = cs553x_init_one(i, !!(val & FLSH_MEM_IO), val & 0xFFFFFFFF); + } + + /* Register all devices together here. This means we can easily hack it to + do mtdconcat etc. if we want to. */ + for (i = 0; i < NR_CS553X_CONTROLLERS; i++) { + if (cs553x_mtd[i]) { + add_mtd_device(cs553x_mtd[i]); + + /* If any devices registered, return success. Else the last error. */ + err = 0; + } + } + + return err; +} + +module_init(cs553x_init); + +static void __exit cs553x_cleanup(void) +{ + int i; + + for (i = 0; i < NR_CS553X_CONTROLLERS; i++) { + struct mtd_info *mtd = cs553x_mtd[i]; + struct nand_chip *this; + void __iomem *mmio_base; + + if (!mtd) + break; + + this = cs553x_mtd[i]->priv; + mmio_base = this->IO_ADDR_R; + + /* Release resources, unregister device */ + nand_release(cs553x_mtd[i]); + cs553x_mtd[i] = NULL; + + /* unmap physical adress */ + iounmap(mmio_base); + + /* Free the MTD device structure */ + kfree(mtd); + } +} + +module_exit(cs553x_cleanup); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Woodhouse "); +MODULE_DESCRIPTION("NAND controller driver for AMD CS5535/CS5536 companion chip"); diff -puN drivers/mtd/nand/diskonchip.c~git-mtd drivers/mtd/nand/diskonchip.c --- devel/drivers/mtd/nand/diskonchip.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/nand/diskonchip.c 2006-05-29 15:02:34.000000000 -0700 @@ -58,10 +58,10 @@ static unsigned long __initdata doc_loca 0xe4000000, #elif defined(CONFIG_MOMENCO_OCELOT) 0x2f000000, - 0xff000000, + 0xff000000, #elif defined(CONFIG_MOMENCO_OCELOT_G) || defined (CONFIG_MOMENCO_OCELOT_C) - 0xff000000, -##else + 0xff000000, +#else #warning Unknown architecture for DiskOnChip. No default probe locations defined #endif 0xffffffff }; @@ -73,7 +73,7 @@ struct doc_priv { unsigned long physadr; u_char ChipID; u_char CDSNControl; - int chips_per_floor; /* The number of chips detected on each floor */ + int chips_per_floor; /* The number of chips detected on each floor */ int curfloor; int curchip; int mh0_page; @@ -84,6 +84,7 @@ struct doc_priv { /* This is the syndrome computed by the HW ecc generator upon reading an empty page, one with all 0xff for data and stored ecc code. */ static u_char empty_read_syndrome[6] = { 0x26, 0xff, 0x6d, 0x47, 0x73, 0x7a }; + /* This is the ecc value computed by the HW ecc generator upon writing an empty page, one with all 0xff for data. */ static u_char empty_write_ecc[6] = { 0x4b, 0x00, 0xe2, 0x0e, 0x93, 0xf7 }; @@ -94,28 +95,29 @@ static u_char empty_write_ecc[6] = { 0x4 #define DoC_is_Millennium(doc) ((doc)->ChipID == DOC_ChipID_DocMil) #define DoC_is_2000(doc) ((doc)->ChipID == DOC_ChipID_Doc2k) -static void doc200x_hwcontrol(struct mtd_info *mtd, int cmd); +static void doc200x_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int bitmask); static void doc200x_select_chip(struct mtd_info *mtd, int chip); -static int debug=0; +static int debug = 0; module_param(debug, int, 0); -static int try_dword=1; +static int try_dword = 1; module_param(try_dword, int, 0); -static int no_ecc_failures=0; +static int no_ecc_failures = 0; module_param(no_ecc_failures, int, 0); -static int no_autopart=0; +static int no_autopart = 0; module_param(no_autopart, int, 0); -static int show_firmware_partition=0; +static int show_firmware_partition = 0; module_param(show_firmware_partition, int, 0); #ifdef MTD_NAND_DISKONCHIP_BBTWRITE -static int inftl_bbt_write=1; +static int inftl_bbt_write = 1; #else -static int inftl_bbt_write=0; +static int inftl_bbt_write = 0; #endif module_param(inftl_bbt_write, int, 0); @@ -123,7 +125,6 @@ static unsigned long doc_config_location module_param(doc_config_location, ulong, 0); MODULE_PARM_DESC(doc_config_location, "Physical memory address at which to probe for DiskOnChip"); - /* Sector size for HW ECC */ #define SECTOR_SIZE 512 /* The sector bytes are packed into NB_DATA 10 bit words */ @@ -147,7 +148,7 @@ static struct rs_control *rs_decoder; * some comments, improved a minor bit and converted it to make use * of the generic Reed-Solomon libary. tglx */ -static int doc_ecc_decode (struct rs_control *rs, uint8_t *data, uint8_t *ecc) +static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc) { int i, j, nerr, errpos[8]; uint8_t parity; @@ -168,18 +169,18 @@ static int doc_ecc_decode (struct rs_con * s[i] = ds[3]x^3 + ds[2]x^2 + ds[1]x^1 + ds[0] * where x = alpha^(FCR + i) */ - for(j = 1; j < NROOTS; j++) { - if(ds[j] == 0) + for (j = 1; j < NROOTS; j++) { + if (ds[j] == 0) continue; tmp = rs->index_of[ds[j]]; - for(i = 0; i < NROOTS; i++) + for (i = 0; i < NROOTS; i++) s[i] ^= rs->alpha_to[rs_modnn(rs, tmp + (FCR + i) * j)]; } /* Calc s[i] = s[i] / alpha^(v + i) */ for (i = 0; i < NROOTS; i++) { if (syn[i]) - syn[i] = rs_modnn(rs, rs->index_of[s[i]] + (NN - FCR - i)); + syn[i] = rs_modnn(rs, rs->index_of[s[i]] + (NN - FCR - i)); } /* Call the decoder library */ nerr = decode_rs16(rs, NULL, NULL, 1019, syn, 0, errpos, 0, errval); @@ -193,7 +194,7 @@ static int doc_ecc_decode (struct rs_con * but they are given by the design of the de/encoder circuit * in the DoC ASIC's. */ - for(i = 0;i < nerr; i++) { + for (i = 0; i < nerr; i++) { int index, bitpos, pos = 1015 - errpos[i]; uint8_t val; if (pos >= NB_DATA && pos < 1019) @@ -205,8 +206,7 @@ static int doc_ecc_decode (struct rs_con can be modified since pos is even */ index = (pos >> 3) ^ 1; bitpos = pos & 7; - if ((index >= 0 && index < SECTOR_SIZE) || - index == (SECTOR_SIZE + 1)) { + if ((index >= 0 && index < SECTOR_SIZE) || index == (SECTOR_SIZE + 1)) { val = (uint8_t) (errval[i] >> (2 + bitpos)); parity ^= val; if (index < SECTOR_SIZE) @@ -216,9 +216,8 @@ static int doc_ecc_decode (struct rs_con bitpos = (bitpos + 10) & 7; if (bitpos == 0) bitpos = 8; - if ((index >= 0 && index < SECTOR_SIZE) || - index == (SECTOR_SIZE + 1)) { - val = (uint8_t)(errval[i] << (8 - bitpos)); + if ((index >= 0 && index < SECTOR_SIZE) || index == (SECTOR_SIZE + 1)) { + val = (uint8_t) (errval[i] << (8 - bitpos)); parity ^= val; if (index < SECTOR_SIZE) data[index] ^= val; @@ -250,10 +249,11 @@ static void DoC_Delay(struct doc_priv *d /* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */ static int _DoC_WaitReady(struct doc_priv *doc) { - void __iomem *docptr = doc->virtadr; + void __iomem *docptr = doc->virtadr; unsigned long timeo = jiffies + (HZ * 10); - if(debug) printk("_DoC_WaitReady...\n"); + if (debug) + printk("_DoC_WaitReady...\n"); /* Out-of-line routine to wait for chip response */ if (DoC_is_MillenniumPlus(doc)) { while ((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) { @@ -280,7 +280,7 @@ static int _DoC_WaitReady(struct doc_pri static inline int DoC_WaitReady(struct doc_priv *doc) { - void __iomem *docptr = doc->virtadr; + void __iomem *docptr = doc->virtadr; int ret = 0; if (DoC_is_MillenniumPlus(doc)) { @@ -298,7 +298,8 @@ static inline int DoC_WaitReady(struct d DoC_Delay(doc, 2); } - if(debug) printk("DoC_WaitReady OK\n"); + if (debug) + printk("DoC_WaitReady OK\n"); return ret; } @@ -306,9 +307,10 @@ static void doc2000_write_byte(struct mt { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; + void __iomem *docptr = doc->virtadr; - if(debug)printk("write_byte %02x\n", datum); + if (debug) + printk("write_byte %02x\n", datum); WriteDOC(datum, docptr, CDSNSlowIO); WriteDOC(datum, docptr, 2k_CDSN_IO); } @@ -317,77 +319,78 @@ static u_char doc2000_read_byte(struct m { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; + void __iomem *docptr = doc->virtadr; u_char ret; ReadDOC(docptr, CDSNSlowIO); DoC_Delay(doc, 2); ret = ReadDOC(docptr, 2k_CDSN_IO); - if (debug) printk("read_byte returns %02x\n", ret); + if (debug) + printk("read_byte returns %02x\n", ret); return ret; } -static void doc2000_writebuf(struct mtd_info *mtd, - const u_char *buf, int len) +static void doc2000_writebuf(struct mtd_info *mtd, const u_char *buf, int len) { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; + void __iomem *docptr = doc->virtadr; int i; - if (debug)printk("writebuf of %d bytes: ", len); - for (i=0; i < len; i++) { + if (debug) + printk("writebuf of %d bytes: ", len); + for (i = 0; i < len; i++) { WriteDOC_(buf[i], docptr, DoC_2k_CDSN_IO + i); if (debug && i < 16) printk("%02x ", buf[i]); } - if (debug) printk("\n"); + if (debug) + printk("\n"); } -static void doc2000_readbuf(struct mtd_info *mtd, - u_char *buf, int len) +static void doc2000_readbuf(struct mtd_info *mtd, u_char *buf, int len) { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; - int i; + void __iomem *docptr = doc->virtadr; + int i; - if (debug)printk("readbuf of %d bytes: ", len); + if (debug) + printk("readbuf of %d bytes: ", len); - for (i=0; i < len; i++) { + for (i = 0; i < len; i++) { buf[i] = ReadDOC(docptr, 2k_CDSN_IO + i); } } -static void doc2000_readbuf_dword(struct mtd_info *mtd, - u_char *buf, int len) +static void doc2000_readbuf_dword(struct mtd_info *mtd, u_char *buf, int len) { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; - int i; + void __iomem *docptr = doc->virtadr; + int i; - if (debug) printk("readbuf_dword of %d bytes: ", len); + if (debug) + printk("readbuf_dword of %d bytes: ", len); - if (unlikely((((unsigned long)buf)|len) & 3)) { - for (i=0; i < len; i++) { - *(uint8_t *)(&buf[i]) = ReadDOC(docptr, 2k_CDSN_IO + i); + if (unlikely((((unsigned long)buf) | len) & 3)) { + for (i = 0; i < len; i++) { + *(uint8_t *) (&buf[i]) = ReadDOC(docptr, 2k_CDSN_IO + i); } } else { - for (i=0; i < len; i+=4) { - *(uint32_t*)(&buf[i]) = readl(docptr + DoC_2k_CDSN_IO + i); + for (i = 0; i < len; i += 4) { + *(uint32_t *) (&buf[i]) = readl(docptr + DoC_2k_CDSN_IO + i); } } } -static int doc2000_verifybuf(struct mtd_info *mtd, - const u_char *buf, int len) +static int doc2000_verifybuf(struct mtd_info *mtd, const u_char *buf, int len) { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; + void __iomem *docptr = doc->virtadr; int i; - for (i=0; i < len; i++) + for (i = 0; i < len; i++) if (buf[i] != ReadDOC(docptr, 2k_CDSN_IO)) return -EFAULT; return 0; @@ -400,12 +403,10 @@ static uint16_t __init doc200x_ident_chi uint16_t ret; doc200x_select_chip(mtd, nr); - doc200x_hwcontrol(mtd, NAND_CTL_SETCLE); - this->write_byte(mtd, NAND_CMD_READID); - doc200x_hwcontrol(mtd, NAND_CTL_CLRCLE); - doc200x_hwcontrol(mtd, NAND_CTL_SETALE); - this->write_byte(mtd, 0); - doc200x_hwcontrol(mtd, NAND_CTL_CLRALE); + doc200x_hwcontrol(mtd, NAND_CMD_READID, + NAND_CTRL_CLE | NAND_CTRL_CHANGE); + doc200x_hwcontrol(mtd, 0, NAND_CTRL_ALE | NAND_CTRL_CHANGE); + doc200x_hwcontrol(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); /* We cant' use dev_ready here, but at least we wait for the * command to complete @@ -423,12 +424,11 @@ static uint16_t __init doc200x_ident_chi } ident; void __iomem *docptr = doc->virtadr; - doc200x_hwcontrol(mtd, NAND_CTL_SETCLE); - doc2000_write_byte(mtd, NAND_CMD_READID); - doc200x_hwcontrol(mtd, NAND_CTL_CLRCLE); - doc200x_hwcontrol(mtd, NAND_CTL_SETALE); - doc2000_write_byte(mtd, 0); - doc200x_hwcontrol(mtd, NAND_CTL_CLRALE); + doc200x_hwcontrol(mtd, NAND_CMD_READID, + NAND_CTRL_CLE | NAND_CTRL_CHANGE); + doc200x_hwcontrol(mtd, 0, NAND_CTRL_ALE | NAND_CTRL_CHANGE); + doc200x_hwcontrol(mtd, NAND_CMD_NONE, + NAND_NCE | NAND_CTRL_CHANGE); udelay(50); @@ -482,7 +482,7 @@ static void doc2001_write_byte(struct mt { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; + void __iomem *docptr = doc->virtadr; WriteDOC(datum, docptr, CDSNSlowIO); WriteDOC(datum, docptr, Mil_CDSN_IO); @@ -493,7 +493,7 @@ static u_char doc2001_read_byte(struct m { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; + void __iomem *docptr = doc->virtadr; //ReadDOC(docptr, CDSNSlowIO); /* 11.4.5 -- delay twice to allow extended length cycle */ @@ -503,50 +503,47 @@ static u_char doc2001_read_byte(struct m return ReadDOC(docptr, LastDataRead); } -static void doc2001_writebuf(struct mtd_info *mtd, - const u_char *buf, int len) +static void doc2001_writebuf(struct mtd_info *mtd, const u_char *buf, int len) { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; + void __iomem *docptr = doc->virtadr; int i; - for (i=0; i < len; i++) + for (i = 0; i < len; i++) WriteDOC_(buf[i], docptr, DoC_Mil_CDSN_IO + i); /* Terminate write pipeline */ WriteDOC(0x00, docptr, WritePipeTerm); } -static void doc2001_readbuf(struct mtd_info *mtd, - u_char *buf, int len) +static void doc2001_readbuf(struct mtd_info *mtd, u_char *buf, int len) { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; + void __iomem *docptr = doc->virtadr; int i; /* Start read pipeline */ ReadDOC(docptr, ReadPipeInit); - for (i=0; i < len-1; i++) + for (i = 0; i < len - 1; i++) buf[i] = ReadDOC(docptr, Mil_CDSN_IO + (i & 0xff)); /* Terminate read pipeline */ buf[i] = ReadDOC(docptr, LastDataRead); } -static int doc2001_verifybuf(struct mtd_info *mtd, - const u_char *buf, int len) +static int doc2001_verifybuf(struct mtd_info *mtd, const u_char *buf, int len) { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; + void __iomem *docptr = doc->virtadr; int i; /* Start read pipeline */ ReadDOC(docptr, ReadPipeInit); - for (i=0; i < len-1; i++) + for (i = 0; i < len - 1; i++) if (buf[i] != ReadDOC(docptr, Mil_CDSN_IO)) { ReadDOC(docptr, LastDataRead); return i; @@ -560,87 +557,90 @@ static u_char doc2001plus_read_byte(stru { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; + void __iomem *docptr = doc->virtadr; u_char ret; - ReadDOC(docptr, Mplus_ReadPipeInit); - ReadDOC(docptr, Mplus_ReadPipeInit); - ret = ReadDOC(docptr, Mplus_LastDataRead); - if (debug) printk("read_byte returns %02x\n", ret); + ReadDOC(docptr, Mplus_ReadPipeInit); + ReadDOC(docptr, Mplus_ReadPipeInit); + ret = ReadDOC(docptr, Mplus_LastDataRead); + if (debug) + printk("read_byte returns %02x\n", ret); return ret; } -static void doc2001plus_writebuf(struct mtd_info *mtd, - const u_char *buf, int len) +static void doc2001plus_writebuf(struct mtd_info *mtd, const u_char *buf, int len) { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; + void __iomem *docptr = doc->virtadr; int i; - if (debug)printk("writebuf of %d bytes: ", len); - for (i=0; i < len; i++) { + if (debug) + printk("writebuf of %d bytes: ", len); + for (i = 0; i < len; i++) { WriteDOC_(buf[i], docptr, DoC_Mil_CDSN_IO + i); if (debug && i < 16) printk("%02x ", buf[i]); } - if (debug) printk("\n"); + if (debug) + printk("\n"); } -static void doc2001plus_readbuf(struct mtd_info *mtd, - u_char *buf, int len) +static void doc2001plus_readbuf(struct mtd_info *mtd, u_char *buf, int len) { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; + void __iomem *docptr = doc->virtadr; int i; - if (debug)printk("readbuf of %d bytes: ", len); + if (debug) + printk("readbuf of %d bytes: ", len); /* Start read pipeline */ ReadDOC(docptr, Mplus_ReadPipeInit); ReadDOC(docptr, Mplus_ReadPipeInit); - for (i=0; i < len-2; i++) { + for (i = 0; i < len - 2; i++) { buf[i] = ReadDOC(docptr, Mil_CDSN_IO); if (debug && i < 16) printk("%02x ", buf[i]); } /* Terminate read pipeline */ - buf[len-2] = ReadDOC(docptr, Mplus_LastDataRead); + buf[len - 2] = ReadDOC(docptr, Mplus_LastDataRead); if (debug && i < 16) - printk("%02x ", buf[len-2]); - buf[len-1] = ReadDOC(docptr, Mplus_LastDataRead); + printk("%02x ", buf[len - 2]); + buf[len - 1] = ReadDOC(docptr, Mplus_LastDataRead); if (debug && i < 16) - printk("%02x ", buf[len-1]); - if (debug) printk("\n"); + printk("%02x ", buf[len - 1]); + if (debug) + printk("\n"); } -static int doc2001plus_verifybuf(struct mtd_info *mtd, - const u_char *buf, int len) +static int doc2001plus_verifybuf(struct mtd_info *mtd, const u_char *buf, int len) { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; + void __iomem *docptr = doc->virtadr; int i; - if (debug)printk("verifybuf of %d bytes: ", len); + if (debug) + printk("verifybuf of %d bytes: ", len); /* Start read pipeline */ ReadDOC(docptr, Mplus_ReadPipeInit); ReadDOC(docptr, Mplus_ReadPipeInit); - for (i=0; i < len-2; i++) + for (i = 0; i < len - 2; i++) if (buf[i] != ReadDOC(docptr, Mil_CDSN_IO)) { ReadDOC(docptr, Mplus_LastDataRead); ReadDOC(docptr, Mplus_LastDataRead); return i; } - if (buf[len-2] != ReadDOC(docptr, Mplus_LastDataRead)) - return len-2; - if (buf[len-1] != ReadDOC(docptr, Mplus_LastDataRead)) - return len-1; + if (buf[len - 2] != ReadDOC(docptr, Mplus_LastDataRead)) + return len - 2; + if (buf[len - 1] != ReadDOC(docptr, Mplus_LastDataRead)) + return len - 1; return 0; } @@ -648,10 +648,11 @@ static void doc2001plus_select_chip(stru { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; + void __iomem *docptr = doc->virtadr; int floor = 0; - if(debug)printk("select chip (%d)\n", chip); + if (debug) + printk("select chip (%d)\n", chip); if (chip == -1) { /* Disable flash internally */ @@ -660,7 +661,7 @@ static void doc2001plus_select_chip(stru } floor = chip / doc->chips_per_floor; - chip -= (floor * doc->chips_per_floor); + chip -= (floor * doc->chips_per_floor); /* Assert ChipEnable and deassert WriteProtect */ WriteDOC((DOC_FLASH_CE), docptr, Mplus_FlashSelect); @@ -674,72 +675,61 @@ static void doc200x_select_chip(struct m { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; + void __iomem *docptr = doc->virtadr; int floor = 0; - if(debug)printk("select chip (%d)\n", chip); + if (debug) + printk("select chip (%d)\n", chip); if (chip == -1) return; floor = chip / doc->chips_per_floor; - chip -= (floor * doc->chips_per_floor); + chip -= (floor * doc->chips_per_floor); /* 11.4.4 -- deassert CE before changing chip */ - doc200x_hwcontrol(mtd, NAND_CTL_CLRNCE); + doc200x_hwcontrol(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE); WriteDOC(floor, docptr, FloorSelect); WriteDOC(chip, docptr, CDSNDeviceSelect); - doc200x_hwcontrol(mtd, NAND_CTL_SETNCE); + doc200x_hwcontrol(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); doc->curchip = chip; doc->curfloor = floor; } -static void doc200x_hwcontrol(struct mtd_info *mtd, int cmd) +#define CDSN_CTRL_MSK (CDSN_CTRL_CE | CDSN_CTRL_CLE | CDSN_CTRL_ALE) + +static void doc200x_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int ctrl) { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; + void __iomem *docptr = doc->virtadr; - switch(cmd) { - case NAND_CTL_SETNCE: - doc->CDSNControl |= CDSN_CTRL_CE; - break; - case NAND_CTL_CLRNCE: - doc->CDSNControl &= ~CDSN_CTRL_CE; - break; - case NAND_CTL_SETCLE: - doc->CDSNControl |= CDSN_CTRL_CLE; - break; - case NAND_CTL_CLRCLE: - doc->CDSNControl &= ~CDSN_CTRL_CLE; - break; - case NAND_CTL_SETALE: - doc->CDSNControl |= CDSN_CTRL_ALE; - break; - case NAND_CTL_CLRALE: - doc->CDSNControl &= ~CDSN_CTRL_ALE; - break; - case NAND_CTL_SETWP: - doc->CDSNControl |= CDSN_CTRL_WP; - break; - case NAND_CTL_CLRWP: - doc->CDSNControl &= ~CDSN_CTRL_WP; - break; + if (ctrl & NAND_CTRL_CHANGE) { + doc->CDSNControl &= ~CDSN_CTRL_MSK; + doc->CDSNControl |= ctrl & CDSN_CTRL_MSK; + if (debug) + printk("hwcontrol(%d): %02x\n", cmd, doc->CDSNControl); + WriteDOC(doc->CDSNControl, docptr, CDSNControl); + /* 11.4.3 -- 4 NOPs after CSDNControl write */ + DoC_Delay(doc, 4); + } + if (cmd != NAND_CMD_NONE) { + if (DoC_is_2000(doc)) + doc2000_write_byte(mtd, cmd); + else + doc2001_write_byte(mtd, cmd); } - if (debug)printk("hwcontrol(%d): %02x\n", cmd, doc->CDSNControl); - WriteDOC(doc->CDSNControl, docptr, CDSNControl); - /* 11.4.3 -- 4 NOPs after CSDNControl write */ - DoC_Delay(doc, 4); } -static void doc2001plus_command (struct mtd_info *mtd, unsigned command, int column, int page_addr) +static void doc2001plus_command(struct mtd_info *mtd, unsigned command, int column, int page_addr) { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; + void __iomem *docptr = doc->virtadr; /* * Must terminate write pipeline before sending any commands @@ -756,9 +746,9 @@ static void doc2001plus_command (struct if (command == NAND_CMD_SEQIN) { int readcmd; - if (column >= mtd->oobblock) { + if (column >= mtd->writesize) { /* OOB area */ - column -= mtd->oobblock; + column -= mtd->writesize; readcmd = NAND_CMD_READOOB; } else if (column < 256) { /* First 256 bytes --> READ0 */ @@ -782,25 +772,26 @@ static void doc2001plus_command (struct WriteDOC(column, docptr, Mplus_FlashAddress); } if (page_addr != -1) { - WriteDOC((unsigned char) (page_addr & 0xff), docptr, Mplus_FlashAddress); - WriteDOC((unsigned char) ((page_addr >> 8) & 0xff), docptr, Mplus_FlashAddress); + WriteDOC((unsigned char)(page_addr & 0xff), docptr, Mplus_FlashAddress); + WriteDOC((unsigned char)((page_addr >> 8) & 0xff), docptr, Mplus_FlashAddress); /* One more address cycle for higher density devices */ if (this->chipsize & 0x0c000000) { - WriteDOC((unsigned char) ((page_addr >> 16) & 0x0f), docptr, Mplus_FlashAddress); + WriteDOC((unsigned char)((page_addr >> 16) & 0x0f), docptr, Mplus_FlashAddress); printk("high density\n"); } } WriteDOC(0, docptr, Mplus_WritePipeTerm); WriteDOC(0, docptr, Mplus_WritePipeTerm); /* deassert ALE */ - if (command == NAND_CMD_READ0 || command == NAND_CMD_READ1 || command == NAND_CMD_READOOB || command == NAND_CMD_READID) + if (command == NAND_CMD_READ0 || command == NAND_CMD_READ1 || + command == NAND_CMD_READOOB || command == NAND_CMD_READID) WriteDOC(0, docptr, Mplus_FlashControl); } /* * program and erase have their own busy handlers * status and sequential in needs no delay - */ + */ switch (command) { case NAND_CMD_PAGEPROG: @@ -817,55 +808,57 @@ static void doc2001plus_command (struct WriteDOC(NAND_CMD_STATUS, docptr, Mplus_FlashCmd); WriteDOC(0, docptr, Mplus_WritePipeTerm); WriteDOC(0, docptr, Mplus_WritePipeTerm); - while ( !(this->read_byte(mtd) & 0x40)); + while (!(this->read_byte(mtd) & 0x40)) ; return; - /* This applies to read commands */ + /* This applies to read commands */ default: /* * If we don't have access to the busy pin, we apply the given * command delay - */ + */ if (!this->dev_ready) { - udelay (this->chip_delay); + udelay(this->chip_delay); return; } } /* Apply this short delay always to ensure that we do wait tWB in * any case on any machine. */ - ndelay (100); + ndelay(100); /* wait until command is processed */ - while (!this->dev_ready(mtd)); + while (!this->dev_ready(mtd)) ; } static int doc200x_dev_ready(struct mtd_info *mtd) { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; + void __iomem *docptr = doc->virtadr; if (DoC_is_MillenniumPlus(doc)) { /* 11.4.2 -- must NOP four times before checking FR/B# */ DoC_Delay(doc, 4); if ((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) { - if(debug) + if (debug) printk("not ready\n"); return 0; } - if (debug)printk("was ready\n"); + if (debug) + printk("was ready\n"); return 1; } else { /* 11.4.2 -- must NOP four times before checking FR/B# */ DoC_Delay(doc, 4); if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) { - if(debug) + if (debug) printk("not ready\n"); return 0; } /* 11.4.2 -- Must NOP twice if it's ready */ DoC_Delay(doc, 2); - if (debug)printk("was ready\n"); + if (debug) + printk("was ready\n"); return 1; } } @@ -881,10 +874,10 @@ static void doc200x_enable_hwecc(struct { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; + void __iomem *docptr = doc->virtadr; /* Prime the ECC engine */ - switch(mode) { + switch (mode) { case NAND_ECC_READ: WriteDOC(DOC_ECC_RESET, docptr, ECCConf); WriteDOC(DOC_ECC_EN, docptr, ECCConf); @@ -900,10 +893,10 @@ static void doc2001plus_enable_hwecc(str { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; + void __iomem *docptr = doc->virtadr; /* Prime the ECC engine */ - switch(mode) { + switch (mode) { case NAND_ECC_READ: WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf); WriteDOC(DOC_ECC_EN, docptr, Mplus_ECCConf); @@ -916,12 +909,11 @@ static void doc2001plus_enable_hwecc(str } /* This code is only called on write */ -static int doc200x_calculate_ecc(struct mtd_info *mtd, const u_char *dat, - unsigned char *ecc_code) +static int doc200x_calculate_ecc(struct mtd_info *mtd, const u_char *dat, unsigned char *ecc_code) { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; + void __iomem *docptr = doc->virtadr; int i; int emptymatch = 1; @@ -961,7 +953,8 @@ static int doc200x_calculate_ecc(struct often. It could be optimized away by examining the data in the writebuf routine, and remembering the result. */ for (i = 0; i < 512; i++) { - if (dat[i] == 0xff) continue; + if (dat[i] == 0xff) + continue; emptymatch = 0; break; } @@ -969,17 +962,20 @@ static int doc200x_calculate_ecc(struct /* If emptymatch still =1, we do have an all-0xff data buffer. Return all-0xff ecc value instead of the computed one, so it'll look just like a freshly-erased page. */ - if (emptymatch) memset(ecc_code, 0xff, 6); + if (emptymatch) + memset(ecc_code, 0xff, 6); #endif return 0; } -static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc) +static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat, + u_char *read_ecc, u_char *isnull) { int i, ret = 0; struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; + void __iomem *docptr = doc->virtadr; + uint8_t calc_ecc[6]; volatile u_char dummy; int emptymatch = 1; @@ -1012,18 +1008,20 @@ static int doc200x_correct_data(struct m all-0xff data and stored ecc block. Check the stored ecc. */ if (emptymatch) { for (i = 0; i < 6; i++) { - if (read_ecc[i] == 0xff) continue; + if (read_ecc[i] == 0xff) + continue; emptymatch = 0; break; } } /* If emptymatch still =1, check the data block. */ if (emptymatch) { - /* Note: this somewhat expensive test should not be triggered - often. It could be optimized away by examining the data in - the readbuf routine, and remembering the result. */ + /* Note: this somewhat expensive test should not be triggered + often. It could be optimized away by examining the data in + the readbuf routine, and remembering the result. */ for (i = 0; i < 512; i++) { - if (dat[i] == 0xff) continue; + if (dat[i] == 0xff) + continue; emptymatch = 0; break; } @@ -1032,7 +1030,8 @@ static int doc200x_correct_data(struct m erased block, in which case the ECC will not come out right. We'll suppress the error and tell the caller everything's OK. Because it is. */ - if (!emptymatch) ret = doc_ecc_decode (rs_decoder, dat, calc_ecc); + if (!emptymatch) + ret = doc_ecc_decode(rs_decoder, dat, calc_ecc); if (ret > 0) printk(KERN_ERR "doc200x_correct_data corrected %d errors\n", ret); } @@ -1059,11 +1058,10 @@ static int doc200x_correct_data(struct m * safer. The only problem with it is that any code that parses oobfree must * be able to handle out-of-order segments. */ -static struct nand_oobinfo doc200x_oobinfo = { - .useecc = MTD_NANDECC_AUTOPLACE, - .eccbytes = 6, - .eccpos = {0, 1, 2, 3, 4, 5}, - .oobfree = { {8, 8}, {6, 2} } +static struct nand_ecclayout doc200x_oobinfo = { + .eccbytes = 6, + .eccpos = {0, 1, 2, 3, 4, 5}, + .oobfree = {{8, 8}, {6, 2}} }; /* Find the (I)NFTL Media Header, and optionally also the mirror media header. @@ -1072,8 +1070,7 @@ static struct nand_oobinfo doc200x_oobin either "ANAND" or "BNAND". If findmirror=1, also look for the mirror media header. The page #s of the found media headers are placed in mh0_page and mh1_page in the DOC private structure. */ -static int __init find_media_headers(struct mtd_info *mtd, u_char *buf, - const char *id, int findmirror) +static int __init find_media_headers(struct mtd_info *mtd, u_char *buf, const char *id, int findmirror) { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; @@ -1082,17 +1079,19 @@ static int __init find_media_headers(str size_t retlen; for (offs = 0; offs < mtd->size; offs += mtd->erasesize) { - ret = mtd->read(mtd, offs, mtd->oobblock, &retlen, buf); - if (retlen != mtd->oobblock) continue; + ret = mtd->read(mtd, offs, mtd->writesize, &retlen, buf); + if (retlen != mtd->writesize) + continue; if (ret) { - printk(KERN_WARNING "ECC error scanning DOC at 0x%x\n", - offs); + printk(KERN_WARNING "ECC error scanning DOC at 0x%x\n", offs); } - if (memcmp(buf, id, 6)) continue; + if (memcmp(buf, id, 6)) + continue; printk(KERN_INFO "Found DiskOnChip %s Media Header at 0x%x\n", id, offs); if (doc->mh0_page == -1) { doc->mh0_page = offs >> this->page_shift; - if (!findmirror) return 1; + if (!findmirror) + return 1; continue; } doc->mh1_page = offs >> this->page_shift; @@ -1105,8 +1104,8 @@ static int __init find_media_headers(str /* Only one mediaheader was found. We want buf to contain a mediaheader on return, so we'll have to re-read the one we found. */ offs = doc->mh0_page << this->page_shift; - ret = mtd->read(mtd, offs, mtd->oobblock, &retlen, buf); - if (retlen != mtd->oobblock) { + ret = mtd->read(mtd, offs, mtd->writesize, &retlen, buf); + if (retlen != mtd->writesize) { /* Insanity. Give up. */ printk(KERN_ERR "Read DiskOnChip Media Header once, but can't reread it???\n"); return 0; @@ -1114,8 +1113,7 @@ static int __init find_media_headers(str return 1; } -static inline int __init nftl_partscan(struct mtd_info *mtd, - struct mtd_partition *parts) +static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partition *parts) { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; @@ -1127,13 +1125,14 @@ static inline int __init nftl_partscan(s unsigned blocks, maxblocks; int offs, numheaders; - buf = kmalloc(mtd->oobblock, GFP_KERNEL); + buf = kmalloc(mtd->writesize, GFP_KERNEL); if (!buf) { printk(KERN_ERR "DiskOnChip mediaheader kmalloc failed!\n"); return 0; } - if (!(numheaders=find_media_headers(mtd, buf, "ANAND", 1))) goto out; - mh = (struct NFTLMediaHeader *) buf; + if (!(numheaders = find_media_headers(mtd, buf, "ANAND", 1))) + goto out; + mh = (struct NFTLMediaHeader *)buf; mh->NumEraseUnits = le16_to_cpu(mh->NumEraseUnits); mh->FirstPhysicalEUN = le16_to_cpu(mh->FirstPhysicalEUN); @@ -1155,8 +1154,8 @@ static inline int __init nftl_partscan(s /* Auto-determine UnitSizeFactor. The constraints are: - There can be at most 32768 virtual blocks. - There can be at most (virtual block size - page size) - virtual blocks (because MediaHeader+BBT must fit in 1). - */ + virtual blocks (because MediaHeader+BBT must fit in 1). + */ mh->UnitSizeFactor = 0xff; while (blocks > maxblocks) { blocks >>= 1; @@ -1211,14 +1210,13 @@ static inline int __init nftl_partscan(s } ret = numparts; -out: + out: kfree(buf); return ret; } /* This is a stripped-down copy of the code in inftlmount.c */ -static inline int __init inftl_partscan(struct mtd_info *mtd, - struct mtd_partition *parts) +static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partition *parts) { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; @@ -1235,15 +1233,16 @@ static inline int __init inftl_partscan( if (inftl_bbt_write) end -= (INFTL_BBT_RESERVED_BLOCKS << this->phys_erase_shift); - buf = kmalloc(mtd->oobblock, GFP_KERNEL); + buf = kmalloc(mtd->writesize, GFP_KERNEL); if (!buf) { printk(KERN_ERR "DiskOnChip mediaheader kmalloc failed!\n"); return 0; } - if (!find_media_headers(mtd, buf, "BNAND", 0)) goto out; + if (!find_media_headers(mtd, buf, "BNAND", 0)) + goto out; doc->mh1_page = doc->mh0_page + (4096 >> this->page_shift); - mh = (struct INFTLMediaHeader *) buf; + mh = (struct INFTLMediaHeader *)buf; mh->NoOfBootImageBlocks = le32_to_cpu(mh->NoOfBootImageBlocks); mh->NoOfBinaryPartitions = le32_to_cpu(mh->NoOfBinaryPartitions); @@ -1319,8 +1318,10 @@ static inline int __init inftl_partscan( parts[numparts].offset = ip->firstUnit << vshift; parts[numparts].size = (1 + ip->lastUnit - ip->firstUnit) << vshift; numparts++; - if (ip->lastUnit > lastvunit) lastvunit = ip->lastUnit; - if (ip->flags & INFTL_LAST) break; + if (ip->lastUnit > lastvunit) + lastvunit = ip->lastUnit; + if (ip->flags & INFTL_LAST) + break; } lastvunit++; if ((lastvunit << vshift) < end) { @@ -1330,7 +1331,7 @@ static inline int __init inftl_partscan( numparts++; } ret = numparts; -out: + out: kfree(buf); return ret; } @@ -1342,11 +1343,12 @@ static int __init nftl_scan_bbt(struct m struct doc_priv *doc = this->priv; struct mtd_partition parts[2]; - memset((char *) parts, 0, sizeof(parts)); + memset((char *)parts, 0, sizeof(parts)); /* On NFTL, we have to find the media headers before we can read the BBTs, since they're stored in the media header eraseblocks. */ numparts = nftl_partscan(mtd, parts); - if (!numparts) return -EIO; + if (!numparts) + return -EIO; this->bbt_td->options = NAND_BBT_ABSPAGE | NAND_BBT_8BIT | NAND_BBT_SAVECONTENT | NAND_BBT_WRITE | NAND_BBT_VERSION; @@ -1393,8 +1395,7 @@ static int __init inftl_scan_bbt(struct this->bbt_td->pages[0] = 2; this->bbt_md = NULL; } else { - this->bbt_td->options = NAND_BBT_LASTBLOCK | NAND_BBT_8BIT | - NAND_BBT_VERSION; + this->bbt_td->options = NAND_BBT_LASTBLOCK | NAND_BBT_8BIT | NAND_BBT_VERSION; if (inftl_bbt_write) this->bbt_td->options |= NAND_BBT_WRITE; this->bbt_td->offs = 8; @@ -1404,8 +1405,7 @@ static int __init inftl_scan_bbt(struct this->bbt_td->reserved_block_code = 0x01; this->bbt_td->pattern = "MSYS_BBT"; - this->bbt_md->options = NAND_BBT_LASTBLOCK | NAND_BBT_8BIT | - NAND_BBT_VERSION; + this->bbt_md->options = NAND_BBT_LASTBLOCK | NAND_BBT_8BIT | NAND_BBT_VERSION; if (inftl_bbt_write) this->bbt_md->options |= NAND_BBT_WRITE; this->bbt_md->offs = 8; @@ -1420,12 +1420,13 @@ static int __init inftl_scan_bbt(struct At least as nand_bbt.c is currently written. */ if ((ret = nand_scan_bbt(mtd, NULL))) return ret; - memset((char *) parts, 0, sizeof(parts)); + memset((char *)parts, 0, sizeof(parts)); numparts = inftl_partscan(mtd, parts); /* At least for now, require the INFTL Media Header. We could probably do without it for non-INFTL use, since all it gives us is autopartitioning, but I want to give it more thought. */ - if (!numparts) return -EIO; + if (!numparts) + return -EIO; add_mtd_device(mtd); #ifdef CONFIG_MTD_PARTITIONS if (!no_autopart) @@ -1439,7 +1440,6 @@ static inline int __init doc2000_init(st struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - this->write_byte = doc2000_write_byte; this->read_byte = doc2000_read_byte; this->write_buf = doc2000_writebuf; this->read_buf = doc2000_readbuf; @@ -1457,7 +1457,6 @@ static inline int __init doc2001_init(st struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - this->write_byte = doc2001_write_byte; this->read_byte = doc2001_read_byte; this->write_buf = doc2001_writebuf; this->read_buf = doc2001_readbuf; @@ -1489,16 +1488,15 @@ static inline int __init doc2001plus_ini struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; - this->write_byte = NULL; this->read_byte = doc2001plus_read_byte; this->write_buf = doc2001plus_writebuf; this->read_buf = doc2001plus_readbuf; this->verify_buf = doc2001plus_verifybuf; this->scan_bbt = inftl_scan_bbt; - this->hwcontrol = NULL; + this->cmd_ctrl = NULL; this->select_chip = doc2001plus_select_chip; this->cmdfunc = doc2001plus_command; - this->enable_hwecc = doc2001plus_enable_hwecc; + this->ecc.hwctl = doc2001plus_enable_hwecc; doc->chips_per_floor = 1; mtd->name = "DiskOnChip Millennium Plus"; @@ -1535,20 +1533,16 @@ static int __init doc_probe(unsigned lon save_control = ReadDOC(virtadr, DOCControl); /* Reset the DiskOnChip ASIC */ - WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET, - virtadr, DOCControl); - WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET, - virtadr, DOCControl); + WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET, virtadr, DOCControl); + WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET, virtadr, DOCControl); /* Enable the DiskOnChip ASIC */ - WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL, - virtadr, DOCControl); - WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL, - virtadr, DOCControl); + WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL, virtadr, DOCControl); + WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL, virtadr, DOCControl); ChipID = ReadDOC(virtadr, ChipID); - switch(ChipID) { + switch (ChipID) { case DOC_ChipID_Doc2k: reg = DoC_2k_ECCStatus; break; @@ -1564,15 +1558,13 @@ static int __init doc_probe(unsigned lon ReadDOC(virtadr, Mplus_Power); /* Reset the Millennium Plus ASIC */ - tmp = DOC_MODE_RESET | DOC_MODE_MDWREN | DOC_MODE_RST_LAT | - DOC_MODE_BDECT; + tmp = DOC_MODE_RESET | DOC_MODE_MDWREN | DOC_MODE_RST_LAT | DOC_MODE_BDECT; WriteDOC(tmp, virtadr, Mplus_DOCControl); WriteDOC(~tmp, virtadr, Mplus_CtrlConfirm); mdelay(1); /* Enable the Millennium Plus ASIC */ - tmp = DOC_MODE_NORMAL | DOC_MODE_MDWREN | DOC_MODE_RST_LAT | - DOC_MODE_BDECT; + tmp = DOC_MODE_NORMAL | DOC_MODE_MDWREN | DOC_MODE_RST_LAT | DOC_MODE_BDECT; WriteDOC(tmp, virtadr, Mplus_DOCControl); WriteDOC(~tmp, virtadr, Mplus_CtrlConfirm); mdelay(1); @@ -1596,7 +1588,7 @@ static int __init doc_probe(unsigned lon goto notfound; } /* Check the TOGGLE bit in the ECC register */ - tmp = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT; + tmp = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT; tmpb = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT; tmpc = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT; if ((tmp == tmpb) || (tmp != tmpc)) { @@ -1626,11 +1618,11 @@ static int __init doc_probe(unsigned lon if (ChipID == DOC_ChipID_DocMilPlus16) { WriteDOC(~newval, virtadr, Mplus_AliasResolution); oldval = ReadDOC(doc->virtadr, Mplus_AliasResolution); - WriteDOC(newval, virtadr, Mplus_AliasResolution); // restore it + WriteDOC(newval, virtadr, Mplus_AliasResolution); // restore it } else { WriteDOC(~newval, virtadr, AliasResolution); oldval = ReadDOC(doc->virtadr, AliasResolution); - WriteDOC(newval, virtadr, AliasResolution); // restore it + WriteDOC(newval, virtadr, AliasResolution); // restore it } newval = ~newval; if (oldval == newval) { @@ -1642,10 +1634,8 @@ static int __init doc_probe(unsigned lon printk(KERN_NOTICE "DiskOnChip found at 0x%lx\n", physadr); len = sizeof(struct mtd_info) + - sizeof(struct nand_chip) + - sizeof(struct doc_priv) + - (2 * sizeof(struct nand_bbt_descr)); - mtd = kmalloc(len, GFP_KERNEL); + sizeof(struct nand_chip) + sizeof(struct doc_priv) + (2 * sizeof(struct nand_bbt_descr)); + mtd = kmalloc(len, GFP_KERNEL); if (!mtd) { printk(KERN_ERR "DiskOnChip kmalloc (%d bytes) failed!\n", len); ret = -ENOMEM; @@ -1663,17 +1653,19 @@ static int __init doc_probe(unsigned lon nand->priv = doc; nand->select_chip = doc200x_select_chip; - nand->hwcontrol = doc200x_hwcontrol; + nand->cmd_ctrl = doc200x_hwcontrol; nand->dev_ready = doc200x_dev_ready; nand->waitfunc = doc200x_wait; nand->block_bad = doc200x_block_bad; - nand->enable_hwecc = doc200x_enable_hwecc; - nand->calculate_ecc = doc200x_calculate_ecc; - nand->correct_data = doc200x_correct_data; - - nand->autooob = &doc200x_oobinfo; - nand->eccmode = NAND_ECC_HW6_512; - nand->options = NAND_USE_FLASH_BBT | NAND_HWECC_SYNDROME; + nand->ecc.hwctl = doc200x_enable_hwecc; + nand->ecc.calculate = doc200x_calculate_ecc; + nand->ecc.correct = doc200x_correct_data; + + nand->ecc.layout = &doc200x_oobinfo; + nand->ecc.mode = NAND_ECC_HW_SYNDROME; + nand->ecc.size = 512; + nand->ecc.bytes = 6; + nand->options = NAND_USE_FLASH_BBT; doc->physadr = physadr; doc->virtadr = virtadr; @@ -1707,18 +1699,18 @@ static int __init doc_probe(unsigned lon doclist = mtd; return 0; -notfound: + notfound: /* Put back the contents of the DOCControl register, in case it's not actually a DiskOnChip. */ WriteDOC(save_control, virtadr, DOCControl); -fail: + fail: iounmap(virtadr); return ret; } static void release_nanddoc(void) { - struct mtd_info *mtd, *nextmtd; + struct mtd_info *mtd, *nextmtd; struct nand_chip *nand; struct doc_priv *doc; @@ -1747,8 +1739,8 @@ static int __init init_nanddoc(void) * generator polinomial degree = 4 */ rs_decoder = init_rs(10, 0x409, FCR, 1, NROOTS); - if (!rs_decoder) { - printk (KERN_ERR "DiskOnChip: Could not create a RS decoder\n"); + if (!rs_decoder) { + printk(KERN_ERR "DiskOnChip: Could not create a RS decoder\n"); return -ENOMEM; } @@ -1758,7 +1750,7 @@ static int __init init_nanddoc(void) if (ret < 0) goto outerr; } else { - for (i=0; (doc_locations[i] != 0xffffffff); i++) { + for (i = 0; (doc_locations[i] != 0xffffffff); i++) { doc_probe(doc_locations[i]); } } @@ -1770,7 +1762,7 @@ static int __init init_nanddoc(void) goto outerr; } return 0; -outerr: + outerr: free_rs(rs_decoder); return ret; } diff -puN drivers/mtd/nand/edb7312.c~git-mtd drivers/mtd/nand/edb7312.c --- devel/drivers/mtd/nand/edb7312.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/nand/edb7312.c 2006-05-29 15:02:34.000000000 -0700 @@ -1,7 +1,7 @@ /* * drivers/mtd/nand/edb7312.c * - * Copyright (C) 2002 Marius Gröger (mag@sysgo.de) + * Copyright (C) 2002 Marius Gröger (mag@sysgo.de) * * Derived from drivers/mtd/nand/autcpu12.c * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de) @@ -25,7 +25,7 @@ #include #include #include -#include /* for CLPS7111_VIRT_BASE */ +#include /* for CLPS7111_VIRT_BASE */ #include #include @@ -54,51 +54,45 @@ static struct mtd_info *ep7312_mtd = NUL */ static unsigned long ep7312_fio_pbase = EP7312_FIO_PBASE; -static void __iomem * ep7312_pxdr = (void __iomem *) EP7312_PXDR; -static void __iomem * ep7312_pxddr = (void __iomem *) EP7312_PXDDR; +static void __iomem *ep7312_pxdr = (void __iomem *)EP7312_PXDR; +static void __iomem *ep7312_pxddr = (void __iomem *)EP7312_PXDDR; #ifdef CONFIG_MTD_PARTITIONS /* * Define static partitions for flash device */ static struct mtd_partition partition_info[] = { - { .name = "EP7312 Nand Flash", - .offset = 0, - .size = 8*1024*1024 } + {.name = "EP7312 Nand Flash", + .offset = 0, + .size = 8 * 1024 * 1024} }; + #define NUM_PARTITIONS 1 #endif - /* * hardware specific access to control-lines + * + * NAND_NCE: bit 0 -> bit 7 + * NAND_CLE: bit 1 -> bit 4 + * NAND_ALE: bit 2 -> bit 5 */ -static void ep7312_hwcontrol(struct mtd_info *mtd, int cmd) +static void ep7312_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) { - switch(cmd) { + struct nand_chip *chip = mtd->priv; - case NAND_CTL_SETCLE: - clps_writeb(clps_readb(ep7312_pxdr) | 0x10, ep7312_pxdr); - break; - case NAND_CTL_CLRCLE: - clps_writeb(clps_readb(ep7312_pxdr) & ~0x10, ep7312_pxdr); - break; - - case NAND_CTL_SETALE: - clps_writeb(clps_readb(ep7312_pxdr) | 0x20, ep7312_pxdr); - break; - case NAND_CTL_CLRALE: - clps_writeb(clps_readb(ep7312_pxdr) & ~0x20, ep7312_pxdr); - break; - - case NAND_CTL_SETNCE: - clps_writeb((clps_readb(ep7312_pxdr) | 0x80) & ~0x40, ep7312_pxdr); - break; - case NAND_CTL_CLRNCE: - clps_writeb((clps_readb(ep7312_pxdr) | 0x80) | 0x40, ep7312_pxdr); - break; + if (ctrl & NAND_CTRL_CHANGE) { + unsigned char bits; + + bits = (ctrl & (NAND_CLE | NAND_ALE)) << 3; + bits = (ctrl & NAND_NCE) << 7; + + clps_writeb((clps_readb(ep7312_pxdr) & 0xB0) | 0x10, + ep7312_pxdr); } + if (cmd != NAND_CMD_NONE) + writeb(cmd, chip->IO_ADDR_W); } /* @@ -108,6 +102,7 @@ static int ep7312_device_ready(struct mt { return 1; } + #ifdef CONFIG_MTD_PARTITIONS const char *part_probes[] = { "cmdlinepart", NULL }; #endif @@ -115,18 +110,16 @@ const char *part_probes[] = { "cmdlinepa /* * Main initialization routine */ -static int __init ep7312_init (void) +static int __init ep7312_init(void) { struct nand_chip *this; const char *part_type = 0; int mtd_parts_nb = 0; struct mtd_partition *mtd_parts = 0; - void __iomem * ep7312_fio_base; + void __iomem *ep7312_fio_base; /* Allocate memory for MTD device structure and private data */ - ep7312_mtd = kmalloc(sizeof(struct mtd_info) + - sizeof(struct nand_chip), - GFP_KERNEL); + ep7312_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); if (!ep7312_mtd) { printk("Unable to allocate EDB7312 NAND MTD device structure.\n"); return -ENOMEM; @@ -134,21 +127,22 @@ static int __init ep7312_init (void) /* map physical adress */ ep7312_fio_base = ioremap(ep7312_fio_pbase, SZ_1K); - if(!ep7312_fio_base) { + if (!ep7312_fio_base) { printk("ioremap EDB7312 NAND flash failed\n"); kfree(ep7312_mtd); return -EIO; } /* Get pointer to private data */ - this = (struct nand_chip *) (&ep7312_mtd[1]); + this = (struct nand_chip *)(&ep7312_mtd[1]); /* Initialize structures */ - memset((char *) ep7312_mtd, 0, sizeof(struct mtd_info)); - memset((char *) this, 0, sizeof(struct nand_chip)); + memset(ep7312_mtd, 0, sizeof(struct mtd_info)); + memset(this, 0, sizeof(struct nand_chip)); /* Link the private data with the MTD structure */ ep7312_mtd->priv = this; + ep7312_mtd->owner = THIS_MODULE; /* * Set GPIO Port B control register so that the pins are configured @@ -159,22 +153,20 @@ static int __init ep7312_init (void) /* insert callbacks */ this->IO_ADDR_R = ep7312_fio_base; this->IO_ADDR_W = ep7312_fio_base; - this->hwcontrol = ep7312_hwcontrol; + this->cmd_ctrl = ep7312_hwcontrol; this->dev_ready = ep7312_device_ready; /* 15 us command delay time */ this->chip_delay = 15; /* Scan to find existence of the device */ - if (nand_scan (ep7312_mtd, 1)) { + if (nand_scan(ep7312_mtd, 1)) { iounmap((void *)ep7312_fio_base); - kfree (ep7312_mtd); + kfree(ep7312_mtd); return -ENXIO; } - #ifdef CONFIG_MTD_PARTITIONS ep7312_mtd->name = "edb7312-nand"; - mtd_parts_nb = parse_mtd_partitions(ep7312_mtd, part_probes, - &mtd_parts, 0); + mtd_parts_nb = parse_mtd_partitions(ep7312_mtd, part_probes, &mtd_parts, 0); if (mtd_parts_nb > 0) part_type = "command line"; else @@ -193,24 +185,23 @@ static int __init ep7312_init (void) /* Return happy */ return 0; } + module_init(ep7312_init); /* * Clean up routine */ -static void __exit ep7312_cleanup (void) +static void __exit ep7312_cleanup(void) { - struct nand_chip *this = (struct nand_chip *) &ep7312_mtd[1]; + struct nand_chip *this = (struct nand_chip *)&ep7312_mtd[1]; /* Release resources, unregister device */ - nand_release (ap7312_mtd); - - /* Free internal data buffer */ - kfree (this->data_buf); + nand_release(ap7312_mtd); /* Free the MTD device structure */ - kfree (ep7312_mtd); + kfree(ep7312_mtd); } + module_exit(ep7312_cleanup); MODULE_LICENSE("GPL"); diff -puN drivers/mtd/nand/h1910.c~git-mtd drivers/mtd/nand/h1910.c --- devel/drivers/mtd/nand/h1910.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/nand/h1910.c 2006-05-29 15:02:34.000000000 -0700 @@ -4,7 +4,7 @@ * Copyright (C) 2003 Joshua Wise (joshua@joshuawise.com) * * Derived from drivers/mtd/nand/edb7312.c - * Copyright (C) 2002 Marius Gröger (mag@sysgo.de) + * Copyright (C) 2002 Marius Gröger (mag@sysgo.de) * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de) * * $Id: h1910.c,v 1.6 2005/11/07 11:14:30 gleixner Exp $ @@ -26,7 +26,7 @@ #include #include #include -#include /* for CLPS7111_VIRT_BASE */ +#include /* for CLPS7111_VIRT_BASE */ #include #include #include @@ -45,47 +45,29 @@ static struct mtd_info *h1910_nand_mtd = * Define static partitions for flash device */ static struct mtd_partition partition_info[] = { - { name: "h1910 NAND Flash", - offset: 0, - size: 16*1024*1024 } + {name:"h1910 NAND Flash", + offset:0, + size:16 * 1024 * 1024} }; + #define NUM_PARTITIONS 1 #endif - /* * hardware specific access to control-lines + * + * NAND_NCE: bit 0 - don't care + * NAND_CLE: bit 1 - address bit 2 + * NAND_ALE: bit 2 - address bit 3 */ -static void h1910_hwcontrol(struct mtd_info *mtd, int cmd) +static void h1910_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int ctrl) { - struct nand_chip* this = (struct nand_chip *) (mtd->priv); - - switch(cmd) { + struct nand_chip *chip = mtd->priv; - case NAND_CTL_SETCLE: - this->IO_ADDR_R |= (1 << 2); - this->IO_ADDR_W |= (1 << 2); - break; - case NAND_CTL_CLRCLE: - this->IO_ADDR_R &= ~(1 << 2); - this->IO_ADDR_W &= ~(1 << 2); - break; - - case NAND_CTL_SETALE: - this->IO_ADDR_R |= (1 << 3); - this->IO_ADDR_W |= (1 << 3); - break; - case NAND_CTL_CLRALE: - this->IO_ADDR_R &= ~(1 << 3); - this->IO_ADDR_W &= ~(1 << 3); - break; - - case NAND_CTL_SETNCE: - break; - case NAND_CTL_CLRNCE: - break; - } + if (cmd != NAND_CMD_NONE) + writeb(cmd, chip->IO_ADDR_W | ((ctrl & 0x6) << 1)); } /* @@ -101,7 +83,7 @@ static int h1910_device_ready(struct mtd /* * Main initialization routine */ -static int __init h1910_init (void) +static int __init h1910_init(void) { struct nand_chip *this; const char *part_type = 0; @@ -119,24 +101,23 @@ static int __init h1910_init (void) } /* Allocate memory for MTD device structure and private data */ - h1910_nand_mtd = kmalloc(sizeof(struct mtd_info) + - sizeof(struct nand_chip), - GFP_KERNEL); + h1910_nand_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); if (!h1910_nand_mtd) { printk("Unable to allocate h1910 NAND MTD device structure.\n"); - iounmap ((void *) nandaddr); + iounmap((void *)nandaddr); return -ENOMEM; } /* Get pointer to private data */ - this = (struct nand_chip *) (&h1910_nand_mtd[1]); + this = (struct nand_chip *)(&h1910_nand_mtd[1]); /* Initialize structures */ - memset((char *) h1910_nand_mtd, 0, sizeof(struct mtd_info)); - memset((char *) this, 0, sizeof(struct nand_chip)); + memset(h1910_nand_mtd, 0, sizeof(struct mtd_info)); + memset(this, 0, sizeof(struct nand_chip)); /* Link the private data with the MTD structure */ h1910_nand_mtd->priv = this; + h1910_nand_mtd->owner = THIS_MODULE; /* * Enable VPEN @@ -146,31 +127,28 @@ static int __init h1910_init (void) /* insert callbacks */ this->IO_ADDR_R = nandaddr; this->IO_ADDR_W = nandaddr; - this->hwcontrol = h1910_hwcontrol; + this->cmd_ctrl = h1910_hwcontrol; this->dev_ready = NULL; /* unknown whether that was correct or not so we will just do it like this */ /* 15 us command delay time */ this->chip_delay = 50; - this->eccmode = NAND_ECC_SOFT; + this->ecc.mode = NAND_ECC_SOFT; this->options = NAND_NO_AUTOINCR; /* Scan to find existence of the device */ - if (nand_scan (h1910_nand_mtd, 1)) { + if (nand_scan(h1910_nand_mtd, 1)) { printk(KERN_NOTICE "No NAND device - returning -ENXIO\n"); - kfree (h1910_nand_mtd); - iounmap ((void *) nandaddr); + kfree(h1910_nand_mtd); + iounmap((void *)nandaddr); return -ENXIO; } - #ifdef CONFIG_MTD_CMDLINE_PARTS - mtd_parts_nb = parse_cmdline_partitions(h1910_nand_mtd, &mtd_parts, - "h1910-nand"); + mtd_parts_nb = parse_cmdline_partitions(h1910_nand_mtd, &mtd_parts, "h1910-nand"); if (mtd_parts_nb > 0) - part_type = "command line"; + part_type = "command line"; else - mtd_parts_nb = 0; + mtd_parts_nb = 0; #endif - if (mtd_parts_nb == 0) - { + if (mtd_parts_nb == 0) { mtd_parts = partition_info; mtd_parts_nb = NUM_PARTITIONS; part_type = "static"; @@ -183,24 +161,26 @@ static int __init h1910_init (void) /* Return happy */ return 0; } + module_init(h1910_init); /* * Clean up routine */ -static void __exit h1910_cleanup (void) +static void __exit h1910_cleanup(void) { - struct nand_chip *this = (struct nand_chip *) &h1910_nand_mtd[1]; + struct nand_chip *this = (struct nand_chip *)&h1910_nand_mtd[1]; /* Release resources, unregister device */ - nand_release (h1910_nand_mtd); + nand_release(h1910_nand_mtd); /* Release io resource */ - iounmap ((void *) this->IO_ADDR_W); + iounmap((void *)this->IO_ADDR_W); /* Free the MTD device structure */ - kfree (h1910_nand_mtd); + kfree(h1910_nand_mtd); } + module_exit(h1910_cleanup); MODULE_LICENSE("GPL"); diff -puN drivers/mtd/nand/Kconfig~git-mtd drivers/mtd/nand/Kconfig --- devel/drivers/mtd/nand/Kconfig~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/nand/Kconfig 2006-05-29 15:02:34.000000000 -0700 @@ -23,6 +23,14 @@ config MTD_NAND_VERIFY_WRITE device thinks the write was successful, a bit could have been flipped accidentaly due to device wear or something else. +config MTD_NAND_ECC_SMC + bool "NAND ECC Smart Media byte order" + depends on MTD_NAND + default n + help + Software ECC according to the Smart Media Specification. + The original Linux implementation had byte 0 and 1 swapped. + config MTD_NAND_AUTCPU12 tristate "SmartMediaCard on autronix autcpu12 board" depends on MTD_NAND && ARCH_AUTCPU12 @@ -49,12 +57,24 @@ config MTD_NAND_SPIA help If you had to ask, you don't have one. Say 'N'. +config MTD_NAND_AMS_DELTA + tristate "NAND Flash device on Amstrad E3" + depends on MACH_AMS_DELTA && MTD_NAND + help + Support for NAND flash on Amstrad E3 (Delta). + config MTD_NAND_TOTO tristate "NAND Flash device on TOTO board" - depends on ARCH_OMAP && MTD_NAND + depends on ARCH_OMAP && MTD_NAND && BROKEN help Support for NAND flash on Texas Instruments Toto platform. +config MTD_NAND_TS7250 + tristate "NAND Flash device on TS-7250 board" + depends on MACH_TS72XX && MTD_NAND + help + Support for NAND flash on Technologic Systems TS-7250 platform. + config MTD_NAND_IDS tristate @@ -76,7 +96,7 @@ config MTD_NAND_RTC_FROM4 config MTD_NAND_PPCHAMELEONEVB tristate "NAND Flash device on PPChameleonEVB board" - depends on PPCHAMELEONEVB && MTD_NAND + depends on PPCHAMELEONEVB && MTD_NAND && BROKEN help This enables the NAND flash driver on the PPChameleon EVB Board. @@ -87,7 +107,7 @@ config MTD_NAND_S3C2410 This enables the NAND flash controller on the S3C2410 and S3C2440 SoCs - No board specfic support is done by this driver, each board + No board specific support is done by this driver, each board must advertise a platform_device for the driver to attach. config MTD_NAND_S3C2410_DEBUG @@ -109,6 +129,12 @@ config MTD_NAND_S3C2410_HWECC currently not be able to switch to software, as there is no implementation for ECC method used by the S3C2410 +config MTD_NAND_NDFC + tristate "NDFC NanD Flash Controller" + depends on MTD_NAND && 44x + help + NDFC Nand Flash Controllers are integrated in EP44x SoCs + config MTD_NAND_DISKONCHIP tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation) (EXPERIMENTAL)" depends on MTD_NAND && EXPERIMENTAL @@ -183,11 +209,24 @@ config MTD_NAND_SHARPSL tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)" depends on MTD_NAND && ARCH_PXA +config MTD_NAND_CS553X + tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)" + depends on MTD_NAND && X86_32 && (X86_PC || X86_GENERICARCH) + help + The CS553x companion chips for the AMD Geode processor + include NAND flash controllers with built-in hardware ECC + capabilities; enabling this option will allow you to use + these. The driver will check the MSRs to verify that the + controller is enabled for NAND, and currently requires that + the controller be in MMIO mode. + + If you say "m", the module will be called "cs553x_nand.ko". + config MTD_NAND_NANDSIM tristate "Support for NAND Flash Simulator" depends on MTD_NAND && MTD_PARTITIONS help - The simulator may simulate verious NAND flash chips for the + The simulator may simulate various NAND flash chips for the MTD nand layer. endmenu diff -puN drivers/mtd/nand/Makefile~git-mtd drivers/mtd/nand/Makefile --- devel/drivers/mtd/nand/Makefile~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/nand/Makefile 2006-05-29 15:02:34.000000000 -0700 @@ -7,6 +7,7 @@ obj-$(CONFIG_MTD_NAND) += nand.o nand_ obj-$(CONFIG_MTD_NAND_IDS) += nand_ids.o obj-$(CONFIG_MTD_NAND_SPIA) += spia.o +obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o obj-$(CONFIG_MTD_NAND_TOTO) += toto.o obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o @@ -17,6 +18,9 @@ obj-$(CONFIG_MTD_NAND_DISKONCHIP) += dis obj-$(CONFIG_MTD_NAND_H1900) += h1910.o obj-$(CONFIG_MTD_NAND_RTC_FROM4) += rtc_from4.o obj-$(CONFIG_MTD_NAND_SHARPSL) += sharpsl.o +obj-$(CONFIG_MTD_NAND_TS7250) += ts7250.o obj-$(CONFIG_MTD_NAND_NANDSIM) += nandsim.o +obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o +obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o nand-objs = nand_base.o nand_bbt.o diff -puN drivers/mtd/nand/nand_base.c~git-mtd drivers/mtd/nand/nand_base.c --- devel/drivers/mtd/nand/nand_base.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/nand/nand_base.c 2006-05-29 15:02:34.000000000 -0700 @@ -10,67 +10,31 @@ * http://www.linux-mtd.infradead.org/tech/nand.html * * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) - * 2002 Thomas Gleixner (tglx@linutronix.de) + * 2002-2006 Thomas Gleixner (tglx@linutronix.de) * - * 02-08-2004 tglx: support for strange chips, which cannot auto increment - * pages on read / read_oob - * - * 03-17-2004 tglx: Check ready before auto increment check. Simon Bayes - * pointed this out, as he marked an auto increment capable chip - * as NOAUTOINCR in the board driver. - * Make reads over block boundaries work too - * - * 04-14-2004 tglx: first working version for 2k page size chips - * - * 05-19-2004 tglx: Basic support for Renesas AG-AND chips - * - * 09-24-2004 tglx: add support for hardware controllers (e.g. ECC) shared - * among multiple independend devices. Suggestions and initial patch - * from Ben Dooks - * - * 12-05-2004 dmarlin: add workaround for Renesas AG-AND chips "disturb" issue. - * Basically, any block not rewritten may lose data when surrounding blocks - * are rewritten many times. JFFS2 ensures this doesn't happen for blocks - * it uses, but the Bad Block Table(s) may not be rewritten. To ensure they - * do not lose data, force them to be rewritten when some of the surrounding - * blocks are erased. Rather than tracking a specific nearby block (which - * could itself go bad), use a page address 'mask' to select several blocks - * in the same area, and rewrite the BBT when any of them are erased. - * - * 01-03-2005 dmarlin: added support for the device recovery command sequence for Renesas - * AG-AND chips. If there was a sudden loss of power during an erase operation, - * a "device recovery" operation must be performed when power is restored - * to ensure correct operation. - * - * 01-20-2005 dmarlin: added support for optional hardware specific callback routine to - * perform extra error status checks on erase and write failures. This required - * adding a wrapper function for nand_read_ecc. - * - * 08-20-2005 vwool: suspend/resume added - * - * Credits: + * Credits: * David Woodhouse for adding multichip support * * Aleph One Ltd. and Toby Churchill Ltd. for supporting the * rework for 2K page size chips * - * TODO: + * TODO: * Enable cached programming for 2k page size chips * Check, if mtd->ecctype should be set to MTD_ECC_HW * if we have HW ecc support. * The AG-AND chips have nice features for speed improvement, * which are not supported yet. Read / program 4 pages in one go. * - * $Id: nand_base.c,v 1.150 2005/09/15 13:58:48 vwool Exp $ - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * */ +#include #include #include +#include #include #include #include @@ -88,75 +52,46 @@ #endif /* Define default oob placement schemes for large and small page devices */ -static struct nand_oobinfo nand_oob_8 = { - .useecc = MTD_NANDECC_AUTOPLACE, +static struct nand_ecclayout nand_oob_8 = { .eccbytes = 3, .eccpos = {0, 1, 2}, - .oobfree = { {3, 2}, {6, 2} } + .oobfree = { + {.offset = 3, + .length = 2}, + {.offset = 6, + .length = 2}} }; -static struct nand_oobinfo nand_oob_16 = { - .useecc = MTD_NANDECC_AUTOPLACE, +static struct nand_ecclayout nand_oob_16 = { .eccbytes = 6, .eccpos = {0, 1, 2, 3, 6, 7}, - .oobfree = { {8, 8} } + .oobfree = { + {.offset = 8, + . length = 8}} }; -static struct nand_oobinfo nand_oob_64 = { - .useecc = MTD_NANDECC_AUTOPLACE, +static struct nand_ecclayout nand_oob_64 = { .eccbytes = 24, .eccpos = { - 40, 41, 42, 43, 44, 45, 46, 47, - 48, 49, 50, 51, 52, 53, 54, 55, - 56, 57, 58, 59, 60, 61, 62, 63}, - .oobfree = { {2, 38} } + 40, 41, 42, 43, 44, 45, 46, 47, + 48, 49, 50, 51, 52, 53, 54, 55, + 56, 57, 58, 59, 60, 61, 62, 63}, + .oobfree = { + {.offset = 2, + .length = 38}} }; -/* This is used for padding purposes in nand_write_oob */ -static u_char ffchars[] = { - 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, - 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, - 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, - 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, - 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, - 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, - 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, - 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, -}; +static int nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, + int new_state); + +static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops); /* - * NAND low-level MTD interface functions + * For devices which display every fart in the system on a seperate LED. Is + * compiled away when LED support is disabled. */ -static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len); -static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len); -static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len); - -static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf); -static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, - size_t * retlen, u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel); -static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf); -static int nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf); -static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len, - size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel); -static int nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char *buf); -static int nand_writev (struct mtd_info *mtd, const struct kvec *vecs, - unsigned long count, loff_t to, size_t * retlen); -static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, - unsigned long count, loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel); -static int nand_erase (struct mtd_info *mtd, struct erase_info *instr); -static void nand_sync (struct mtd_info *mtd); - -/* Some internal functions */ -static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf, - struct nand_oobinfo *oobsel, int mode); -#ifdef CONFIG_MTD_NAND_VERIFY_WRITE -static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages, - u_char *oob_buf, struct nand_oobinfo *oobsel, int chipnr, int oobmode); -#else -#define nand_verify_pages(...) (0) -#endif - -static int nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state); +DEFINE_LED_TRIGGER(nand_led_trigger); /** * nand_release_device - [GENERIC] release chip @@ -164,27 +99,19 @@ static int nand_get_device (struct nand_ * * Deselect, release chip lock and wake up anyone waiting on the device */ -static void nand_release_device (struct mtd_info *mtd) +static void nand_release_device(struct mtd_info *mtd) { - struct nand_chip *this = mtd->priv; + struct nand_chip *chip = mtd->priv; /* De-select the NAND device */ - this->select_chip(mtd, -1); + chip->select_chip(mtd, -1); - if (this->controller) { - /* Release the controller and the chip */ - spin_lock(&this->controller->lock); - this->controller->active = NULL; - this->state = FL_READY; - wake_up(&this->controller->wq); - spin_unlock(&this->controller->lock); - } else { - /* Release the chip */ - spin_lock(&this->chip_lock); - this->state = FL_READY; - wake_up(&this->wq); - spin_unlock(&this->chip_lock); - } + /* Release the controller and the chip */ + spin_lock(&chip->controller->lock); + chip->controller->active = NULL; + chip->state = FL_READY; + wake_up(&chip->controller->wq); + spin_unlock(&chip->controller->lock); } /** @@ -193,23 +120,10 @@ static void nand_release_device (struct * * Default read function for 8bit buswith */ -static u_char nand_read_byte(struct mtd_info *mtd) -{ - struct nand_chip *this = mtd->priv; - return readb(this->IO_ADDR_R); -} - -/** - * nand_write_byte - [DEFAULT] write one byte to the chip - * @mtd: MTD device structure - * @byte: pointer to data byte to write - * - * Default write function for 8it buswith - */ -static void nand_write_byte(struct mtd_info *mtd, u_char byte) +static uint8_t nand_read_byte(struct mtd_info *mtd) { - struct nand_chip *this = mtd->priv; - writeb(byte, this->IO_ADDR_W); + struct nand_chip *chip = mtd->priv; + return readb(chip->IO_ADDR_R); } /** @@ -219,24 +133,10 @@ static void nand_write_byte(struct mtd_i * Default read function for 16bit buswith with * endianess conversion */ -static u_char nand_read_byte16(struct mtd_info *mtd) -{ - struct nand_chip *this = mtd->priv; - return (u_char) cpu_to_le16(readw(this->IO_ADDR_R)); -} - -/** - * nand_write_byte16 - [DEFAULT] write one byte endianess aware to the chip - * @mtd: MTD device structure - * @byte: pointer to data byte to write - * - * Default write function for 16bit buswith with - * endianess conversion - */ -static void nand_write_byte16(struct mtd_info *mtd, u_char byte) +static uint8_t nand_read_byte16(struct mtd_info *mtd) { - struct nand_chip *this = mtd->priv; - writew(le16_to_cpu((u16) byte), this->IO_ADDR_W); + struct nand_chip *chip = mtd->priv; + return (uint8_t) cpu_to_le16(readw(chip->IO_ADDR_R)); } /** @@ -248,22 +148,8 @@ static void nand_write_byte16(struct mtd */ static u16 nand_read_word(struct mtd_info *mtd) { - struct nand_chip *this = mtd->priv; - return readw(this->IO_ADDR_R); -} - -/** - * nand_write_word - [DEFAULT] write one word to the chip - * @mtd: MTD device structure - * @word: data word to write - * - * Default write function for 16bit buswith without - * endianess conversion - */ -static void nand_write_word(struct mtd_info *mtd, u16 word) -{ - struct nand_chip *this = mtd->priv; - writew(word, this->IO_ADDR_W); + struct nand_chip *chip = mtd->priv; + return readw(chip->IO_ADDR_R); } /** @@ -273,15 +159,15 @@ static void nand_write_word(struct mtd_i * * Default select function for 1 chip devices. */ -static void nand_select_chip(struct mtd_info *mtd, int chip) +static void nand_select_chip(struct mtd_info *mtd, int chipnr) { - struct nand_chip *this = mtd->priv; - switch(chip) { + struct nand_chip *chip = mtd->priv; + + switch (chipnr) { case -1: - this->hwcontrol(mtd, NAND_CTL_CLRNCE); + chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE); break; case 0: - this->hwcontrol(mtd, NAND_CTL_SETNCE); break; default: @@ -297,13 +183,13 @@ static void nand_select_chip(struct mtd_ * * Default write function for 8bit buswith */ -static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) +static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) { int i; - struct nand_chip *this = mtd->priv; + struct nand_chip *chip = mtd->priv; - for (i=0; iIO_ADDR_W); + for (i = 0; i < len; i++) + writeb(buf[i], chip->IO_ADDR_W); } /** @@ -314,13 +200,13 @@ static void nand_write_buf(struct mtd_in * * Default read function for 8bit buswith */ -static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) +static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) { int i; - struct nand_chip *this = mtd->priv; + struct nand_chip *chip = mtd->priv; - for (i=0; iIO_ADDR_R); + for (i = 0; i < len; i++) + buf[i] = readb(chip->IO_ADDR_R); } /** @@ -331,15 +217,14 @@ static void nand_read_buf(struct mtd_inf * * Default verify function for 8bit buswith */ -static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) +static int nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len) { int i; - struct nand_chip *this = mtd->priv; + struct nand_chip *chip = mtd->priv; - for (i=0; iIO_ADDR_R)) + for (i = 0; i < len; i++) + if (buf[i] != readb(chip->IO_ADDR_R)) return -EFAULT; - return 0; } @@ -351,15 +236,15 @@ static int nand_verify_buf(struct mtd_in * * Default write function for 16bit buswith */ -static void nand_write_buf16(struct mtd_info *mtd, const u_char *buf, int len) +static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len) { int i; - struct nand_chip *this = mtd->priv; + struct nand_chip *chip = mtd->priv; u16 *p = (u16 *) buf; len >>= 1; - for (i=0; iIO_ADDR_W); + for (i = 0; i < len; i++) + writew(p[i], chip->IO_ADDR_W); } @@ -371,15 +256,15 @@ static void nand_write_buf16(struct mtd_ * * Default read function for 16bit buswith */ -static void nand_read_buf16(struct mtd_info *mtd, u_char *buf, int len) +static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len) { int i; - struct nand_chip *this = mtd->priv; + struct nand_chip *chip = mtd->priv; u16 *p = (u16 *) buf; len >>= 1; - for (i=0; iIO_ADDR_R); + for (i = 0; i < len; i++) + p[i] = readw(chip->IO_ADDR_R); } /** @@ -390,15 +275,15 @@ static void nand_read_buf16(struct mtd_i * * Default verify function for 16bit buswith */ -static int nand_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len) +static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len) { int i; - struct nand_chip *this = mtd->priv; + struct nand_chip *chip = mtd->priv; u16 *p = (u16 *) buf; len >>= 1; - for (i=0; iIO_ADDR_R)) + for (i = 0; i < len; i++) + if (p[i] != readw(chip->IO_ADDR_R)) return -EFAULT; return 0; @@ -415,38 +300,37 @@ static int nand_verify_buf16(struct mtd_ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) { int page, chipnr, res = 0; - struct nand_chip *this = mtd->priv; + struct nand_chip *chip = mtd->priv; u16 bad; if (getchip) { - page = (int)(ofs >> this->page_shift); - chipnr = (int)(ofs >> this->chip_shift); + page = (int)(ofs >> chip->page_shift); + chipnr = (int)(ofs >> chip->chip_shift); - /* Grab the lock and see if the device is available */ - nand_get_device (this, mtd, FL_READING); + nand_get_device(chip, mtd, FL_READING); /* Select the NAND device */ - this->select_chip(mtd, chipnr); + chip->select_chip(mtd, chipnr); } else - page = (int) ofs; + page = (int)ofs; - if (this->options & NAND_BUSWIDTH_16) { - this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos & 0xFE, page & this->pagemask); - bad = cpu_to_le16(this->read_word(mtd)); - if (this->badblockpos & 0x1) + if (chip->options & NAND_BUSWIDTH_16) { + chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos & 0xFE, + page & chip->pagemask); + bad = cpu_to_le16(chip->read_word(mtd)); + if (chip->badblockpos & 0x1) bad >>= 8; if ((bad & 0xFF) != 0xff) res = 1; } else { - this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos, page & this->pagemask); - if (this->read_byte(mtd) != 0xff) + chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos, + page & chip->pagemask); + if (chip->read_byte(mtd) != 0xff) res = 1; } - if (getchip) { - /* Deselect and wake up anyone waiting on the device */ + if (getchip) nand_release_device(mtd); - } return res; } @@ -461,23 +345,27 @@ static int nand_block_bad(struct mtd_inf */ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) { - struct nand_chip *this = mtd->priv; - u_char buf[2] = {0, 0}; - size_t retlen; + struct nand_chip *chip = mtd->priv; + uint8_t buf[2] = { 0, 0 }; int block; /* Get block number */ - block = ((int) ofs) >> this->bbt_erase_shift; - if (this->bbt) - this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); + block = ((int)ofs) >> chip->bbt_erase_shift; + if (chip->bbt) + chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); /* Do we have a flash based bad block table ? */ - if (this->options & NAND_USE_FLASH_BBT) - return nand_update_bbt (mtd, ofs); + if (chip->options & NAND_USE_FLASH_BBT) + return nand_update_bbt(mtd, ofs); /* We write two bytes, so we dont have to mess with 16 bit access */ - ofs += mtd->oobsize + (this->badblockpos & ~0x01); - return nand_write_oob (mtd, ofs , 2, &retlen, buf); + ofs += mtd->oobsize; + chip->ops.len = 2; + chip->ops.datbuf = NULL; + chip->ops.oobbuf = buf; + chip->ops.ooboffs = chip->badblockpos & ~0x01; + + return nand_do_write_oob(mtd, ofs, &chip->ops); } /** @@ -487,12 +375,12 @@ static int nand_default_block_markbad(st * * The function expects, that the device is already selected */ -static int nand_check_wp (struct mtd_info *mtd) +static int nand_check_wp(struct mtd_info *mtd) { - struct nand_chip *this = mtd->priv; + struct nand_chip *chip = mtd->priv; /* Check the WP bit */ - this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1); - return (this->read_byte(mtd) & NAND_STATUS_WP) ? 0 : 1; + chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); + return (chip->read_byte(mtd) & NAND_STATUS_WP) ? 0 : 1; } /** @@ -505,32 +393,31 @@ static int nand_check_wp (struct mtd_inf * Check, if the block is bad. Either by reading the bad block table or * calling of the scan function. */ -static int nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt) +static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip, + int allowbbt) { - struct nand_chip *this = mtd->priv; + struct nand_chip *chip = mtd->priv; - if (!this->bbt) - return this->block_bad(mtd, ofs, getchip); + if (!chip->bbt) + return chip->block_bad(mtd, ofs, getchip); /* Return info from the table */ - return nand_isbad_bbt (mtd, ofs, allowbbt); + return nand_isbad_bbt(mtd, ofs, allowbbt); } -DEFINE_LED_TRIGGER(nand_led_trigger); - /* * Wait for the ready pin, after a command * The timeout is catched later. */ static void nand_wait_ready(struct mtd_info *mtd) { - struct nand_chip *this = mtd->priv; - unsigned long timeo = jiffies + 2; + struct nand_chip *chip = mtd->priv; + unsigned long timeo = jiffies + 2; led_trigger_event(nand_led_trigger, LED_FULL); /* wait until command is processed or timeout occures */ do { - if (this->dev_ready(mtd)) + if (chip->dev_ready(mtd)) break; touch_softlockup_watchdog(); } while (time_before(jiffies, timeo)); @@ -547,21 +434,21 @@ static void nand_wait_ready(struct mtd_i * Send command to NAND device. This function is used for small page * devices (256/512 Bytes per page) */ -static void nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr) +static void nand_command(struct mtd_info *mtd, unsigned int command, + int column, int page_addr) { - register struct nand_chip *this = mtd->priv; + register struct nand_chip *chip = mtd->priv; + int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE; - /* Begin command latch cycle */ - this->hwcontrol(mtd, NAND_CTL_SETCLE); /* * Write out the command to the device. */ if (command == NAND_CMD_SEQIN) { int readcmd; - if (column >= mtd->oobblock) { + if (column >= mtd->writesize) { /* OOB area */ - column -= mtd->oobblock; + column -= mtd->writesize; readcmd = NAND_CMD_READOOB; } else if (column < 256) { /* First 256 bytes --> READ0 */ @@ -570,38 +457,37 @@ static void nand_command (struct mtd_inf column -= 256; readcmd = NAND_CMD_READ1; } - this->write_byte(mtd, readcmd); + chip->cmd_ctrl(mtd, readcmd, ctrl); + ctrl &= ~NAND_CTRL_CHANGE; } - this->write_byte(mtd, command); - - /* Set ALE and clear CLE to start address cycle */ - this->hwcontrol(mtd, NAND_CTL_CLRCLE); - - if (column != -1 || page_addr != -1) { - this->hwcontrol(mtd, NAND_CTL_SETALE); + chip->cmd_ctrl(mtd, command, ctrl); - /* Serially input address */ - if (column != -1) { - /* Adjust columns for 16 bit buswidth */ - if (this->options & NAND_BUSWIDTH_16) - column >>= 1; - this->write_byte(mtd, column); - } - if (page_addr != -1) { - this->write_byte(mtd, (unsigned char) (page_addr & 0xff)); - this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff)); - /* One more address cycle for devices > 32MiB */ - if (this->chipsize > (32 << 20)) - this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0x0f)); - } - /* Latch in address */ - this->hwcontrol(mtd, NAND_CTL_CLRALE); + /* + * Address cycle, when necessary + */ + ctrl = NAND_CTRL_ALE | NAND_CTRL_CHANGE; + /* Serially input address */ + if (column != -1) { + /* Adjust columns for 16 bit buswidth */ + if (chip->options & NAND_BUSWIDTH_16) + column >>= 1; + chip->cmd_ctrl(mtd, column, ctrl); + ctrl &= ~NAND_CTRL_CHANGE; + } + if (page_addr != -1) { + chip->cmd_ctrl(mtd, page_addr, ctrl); + ctrl &= ~NAND_CTRL_CHANGE; + chip->cmd_ctrl(mtd, page_addr >> 8, ctrl); + /* One more address cycle for devices > 32MiB */ + if (chip->chipsize > (32 << 20)) + chip->cmd_ctrl(mtd, page_addr >> 16, ctrl); } + chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); /* * program and erase have their own busy handlers * status and sequential in needs no delay - */ + */ switch (command) { case NAND_CMD_PAGEPROG: @@ -609,32 +495,34 @@ static void nand_command (struct mtd_inf case NAND_CMD_ERASE2: case NAND_CMD_SEQIN: case NAND_CMD_STATUS: + chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE); return; case NAND_CMD_RESET: - if (this->dev_ready) + if (chip->dev_ready) break; - udelay(this->chip_delay); - this->hwcontrol(mtd, NAND_CTL_SETCLE); - this->write_byte(mtd, NAND_CMD_STATUS); - this->hwcontrol(mtd, NAND_CTL_CLRCLE); - while ( !(this->read_byte(mtd) & NAND_STATUS_READY)); + udelay(chip->chip_delay); + chip->cmd_ctrl(mtd, NAND_CMD_STATUS, + NAND_CTRL_CLE | NAND_CTRL_CHANGE); + chip->cmd_ctrl(mtd, + NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); + while (!(chip->read_byte(mtd) & NAND_STATUS_READY)) ; return; - /* This applies to read commands */ + /* This applies to read commands */ default: /* * If we don't have access to the busy pin, we apply the given * command delay - */ - if (!this->dev_ready) { - udelay (this->chip_delay); + */ + if (!chip->dev_ready) { + udelay(chip->chip_delay); return; } } /* Apply this short delay always to ensure that we do wait tWB in * any case on any machine. */ - ndelay (100); + ndelay(100); nand_wait_ready(mtd); } @@ -646,50 +534,49 @@ static void nand_command (struct mtd_inf * @column: the column address for this command, -1 if none * @page_addr: the page address for this command, -1 if none * - * Send command to NAND device. This is the version for the new large page devices - * We dont have the seperate regions as we have in the small page devices. - * We must emulate NAND_CMD_READOOB to keep the code compatible. + * Send command to NAND device. This is the version for the new large page + * devices We dont have the separate regions as we have in the small page + * devices. We must emulate NAND_CMD_READOOB to keep the code compatible. * */ -static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column, int page_addr) +static void nand_command_lp(struct mtd_info *mtd, unsigned int command, + int column, int page_addr) { - register struct nand_chip *this = mtd->priv; + register struct nand_chip *chip = mtd->priv; /* Emulate NAND_CMD_READOOB */ if (command == NAND_CMD_READOOB) { - column += mtd->oobblock; + column += mtd->writesize; command = NAND_CMD_READ0; } - - /* Begin command latch cycle */ - this->hwcontrol(mtd, NAND_CTL_SETCLE); - /* Write out the command to the device. */ - this->write_byte(mtd, (command & 0xff)); - /* End command latch cycle */ - this->hwcontrol(mtd, NAND_CTL_CLRCLE); + /* Command latch cycle */ + chip->cmd_ctrl(mtd, command & 0xff, + NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); if (column != -1 || page_addr != -1) { - this->hwcontrol(mtd, NAND_CTL_SETALE); + int ctrl = NAND_CTRL_CHANGE | NAND_NCE | NAND_ALE; /* Serially input address */ if (column != -1) { /* Adjust columns for 16 bit buswidth */ - if (this->options & NAND_BUSWIDTH_16) + if (chip->options & NAND_BUSWIDTH_16) column >>= 1; - this->write_byte(mtd, column & 0xff); - this->write_byte(mtd, column >> 8); + chip->cmd_ctrl(mtd, column, ctrl); + ctrl &= ~NAND_CTRL_CHANGE; + chip->cmd_ctrl(mtd, column >> 8, ctrl); } if (page_addr != -1) { - this->write_byte(mtd, (unsigned char) (page_addr & 0xff)); - this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff)); + chip->cmd_ctrl(mtd, page_addr, ctrl); + chip->cmd_ctrl(mtd, page_addr >> 8, + NAND_NCE | NAND_ALE); /* One more address cycle for devices > 128MiB */ - if (this->chipsize > (128 << 20)) - this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0xff)); + if (chip->chipsize > (128 << 20)) + chip->cmd_ctrl(mtd, page_addr >> 16, + NAND_NCE | NAND_ALE); } - /* Latch in address */ - this->hwcontrol(mtd, NAND_CTL_CLRALE); } + chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); /* * program and erase have their own busy handlers @@ -706,51 +593,49 @@ static void nand_command_lp (struct mtd_ case NAND_CMD_DEPLETE1: return; - /* - * read error status commands require only a short delay - */ + /* + * read error status commands require only a short delay + */ case NAND_CMD_STATUS_ERROR: case NAND_CMD_STATUS_ERROR0: case NAND_CMD_STATUS_ERROR1: case NAND_CMD_STATUS_ERROR2: case NAND_CMD_STATUS_ERROR3: - udelay(this->chip_delay); + udelay(chip->chip_delay); return; case NAND_CMD_RESET: - if (this->dev_ready) + if (chip->dev_ready) break; - udelay(this->chip_delay); - this->hwcontrol(mtd, NAND_CTL_SETCLE); - this->write_byte(mtd, NAND_CMD_STATUS); - this->hwcontrol(mtd, NAND_CTL_CLRCLE); - while ( !(this->read_byte(mtd) & NAND_STATUS_READY)); + udelay(chip->chip_delay); + chip->cmd_ctrl(mtd, NAND_CMD_STATUS, + NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); + chip->cmd_ctrl(mtd, NAND_CMD_NONE, + NAND_NCE | NAND_CTRL_CHANGE); + while (!(chip->read_byte(mtd) & NAND_STATUS_READY)) ; return; case NAND_CMD_READ0: - /* Begin command latch cycle */ - this->hwcontrol(mtd, NAND_CTL_SETCLE); - /* Write out the start read command */ - this->write_byte(mtd, NAND_CMD_READSTART); - /* End command latch cycle */ - this->hwcontrol(mtd, NAND_CTL_CLRCLE); - /* Fall through into ready check */ + chip->cmd_ctrl(mtd, NAND_CMD_READSTART, + NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); + chip->cmd_ctrl(mtd, NAND_CMD_NONE, + NAND_NCE | NAND_CTRL_CHANGE); - /* This applies to read commands */ + /* This applies to read commands */ default: /* * If we don't have access to the busy pin, we apply the given * command delay - */ - if (!this->dev_ready) { - udelay (this->chip_delay); + */ + if (!chip->dev_ready) { + udelay(chip->chip_delay); return; } } /* Apply this short delay always to ensure that we do wait tWB in * any case on any machine. */ - ndelay (100); + ndelay(100); nand_wait_ready(mtd); } @@ -763,34 +648,28 @@ static void nand_command_lp (struct mtd_ * * Get the device and lock it for exclusive access */ -static int nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state) +static int +nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state) { - struct nand_chip *active; - spinlock_t *lock; - wait_queue_head_t *wq; - DECLARE_WAITQUEUE (wait, current); - - lock = (this->controller) ? &this->controller->lock : &this->chip_lock; - wq = (this->controller) ? &this->controller->wq : &this->wq; -retry: - active = this; + spinlock_t *lock = &chip->controller->lock; + wait_queue_head_t *wq = &chip->controller->wq; + DECLARE_WAITQUEUE(wait, current); + retry: spin_lock(lock); /* Hardware controller shared among independend devices */ - if (this->controller) { - if (this->controller->active) - active = this->controller->active; - else - this->controller->active = this; - } - if (active == this && this->state == FL_READY) { - this->state = new_state; + /* Hardware controller shared among independend devices */ + if (!chip->controller->active) + chip->controller->active = chip; + + if (chip->controller->active == chip && chip->state == FL_READY) { + chip->state = new_state; spin_unlock(lock); return 0; } if (new_state == FL_PM_SUSPENDED) { spin_unlock(lock); - return (this->state == FL_PM_SUSPENDED) ? 0 : -EAGAIN; + return (chip->state == FL_PM_SUSPENDED) ? 0 : -EAGAIN; } set_current_state(TASK_UNINTERRUPTIBLE); add_wait_queue(wq, &wait); @@ -811,533 +690,324 @@ retry: * general NAND and SmartMedia specs * */ -static int nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state) +static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip, int state) { - unsigned long timeo = jiffies; - int status; + unsigned long timeo = jiffies; + int status; if (state == FL_ERASING) - timeo += (HZ * 400) / 1000; + timeo += (HZ * 400) / 1000; else - timeo += (HZ * 20) / 1000; + timeo += (HZ * 20) / 1000; led_trigger_event(nand_led_trigger, LED_FULL); /* Apply this short delay always to ensure that we do wait tWB in * any case on any machine. */ - ndelay (100); + ndelay(100); - if ((state == FL_ERASING) && (this->options & NAND_IS_AND)) - this->cmdfunc (mtd, NAND_CMD_STATUS_MULTI, -1, -1); + if ((state == FL_ERASING) && (chip->options & NAND_IS_AND)) + chip->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1); else - this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1); + chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); while (time_before(jiffies, timeo)) { /* Check, if we were interrupted */ - if (this->state != state) + if (chip->state != state) return 0; - if (this->dev_ready) { - if (this->dev_ready(mtd)) + if (chip->dev_ready) { + if (chip->dev_ready(mtd)) break; } else { - if (this->read_byte(mtd) & NAND_STATUS_READY) + if (chip->read_byte(mtd) & NAND_STATUS_READY) break; } cond_resched(); } led_trigger_event(nand_led_trigger, LED_OFF); - status = (int) this->read_byte(mtd); + status = (int)chip->read_byte(mtd); return status; } /** - * nand_write_page - [GENERIC] write one page - * @mtd: MTD device structure - * @this: NAND chip structure - * @page: startpage inside the chip, must be called with (page & this->pagemask) - * @oob_buf: out of band data buffer - * @oobsel: out of band selecttion structre - * @cached: 1 = enable cached programming if supported by chip - * - * Nand_page_program function is used for write and writev ! - * This function will always program a full page of data - * If you call it with a non page aligned buffer, you're lost :) - * - * Cached programming is not supported yet. - */ -static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, - u_char *oob_buf, struct nand_oobinfo *oobsel, int cached) -{ - int i, status; - u_char ecc_code[32]; - int eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE; - int *oob_config = oobsel->eccpos; - int datidx = 0, eccidx = 0, eccsteps = this->eccsteps; - int eccbytes = 0; - - /* FIXME: Enable cached programming */ - cached = 0; - - /* Send command to begin auto page programming */ - this->cmdfunc (mtd, NAND_CMD_SEQIN, 0x00, page); + * nand_read_page_raw - [Intern] read raw page data without ecc + * @mtd: mtd info structure + * @chip: nand chip info structure + * @buf: buffer to store read data + */ +static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf) +{ + chip->read_buf(mtd, buf, mtd->writesize); + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); + return 0; +} - /* Write out complete page of data, take care of eccmode */ - switch (eccmode) { - /* No ecc, write all */ - case NAND_ECC_NONE: - printk (KERN_WARNING "Writing data without ECC to NAND-FLASH is not recommended\n"); - this->write_buf(mtd, this->data_poi, mtd->oobblock); - break; +/** + * nand_read_page_swecc - {REPLACABLE] software ecc based page read function + * @mtd: mtd info structure + * @chip: nand chip info structure + * @buf: buffer to store read data + */ +static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf) +{ + int i, eccsize = chip->ecc.size; + int eccbytes = chip->ecc.bytes; + int eccsteps = chip->ecc.steps; + uint8_t *p = buf; + uint8_t *ecc_calc = chip->buffers.ecccalc; + uint8_t *ecc_code = chip->buffers.ecccode; + int *eccpos = chip->ecc.layout->eccpos; + + nand_read_page_raw(mtd, chip, buf); + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) + chip->ecc.calculate(mtd, p, &ecc_calc[i]); + + for (i = 0; i < chip->ecc.total; i++) + ecc_code[i] = chip->oob_poi[eccpos[i]]; + + eccsteps = chip->ecc.steps; + p = buf; + + for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + int stat; + + stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); + if (stat == -1) + mtd->ecc_stats.failed++; + else + mtd->ecc_stats.corrected += stat; + } + return 0; +} - /* Software ecc 3/256, write all */ - case NAND_ECC_SOFT: - for (; eccsteps; eccsteps--) { - this->calculate_ecc(mtd, &this->data_poi[datidx], ecc_code); - for (i = 0; i < 3; i++, eccidx++) - oob_buf[oob_config[eccidx]] = ecc_code[i]; - datidx += this->eccsize; - } - this->write_buf(mtd, this->data_poi, mtd->oobblock); - break; - default: - eccbytes = this->eccbytes; - for (; eccsteps; eccsteps--) { - /* enable hardware ecc logic for write */ - this->enable_hwecc(mtd, NAND_ECC_WRITE); - this->write_buf(mtd, &this->data_poi[datidx], this->eccsize); - this->calculate_ecc(mtd, &this->data_poi[datidx], ecc_code); - for (i = 0; i < eccbytes; i++, eccidx++) - oob_buf[oob_config[eccidx]] = ecc_code[i]; - /* If the hardware ecc provides syndromes then - * the ecc code must be written immidiately after - * the data bytes (words) */ - if (this->options & NAND_HWECC_SYNDROME) - this->write_buf(mtd, ecc_code, eccbytes); - datidx += this->eccsize; - } - break; +/** + * nand_read_page_hwecc - {REPLACABLE] hardware ecc based page read function + * @mtd: mtd info structure + * @chip: nand chip info structure + * @buf: buffer to store read data + * + * Not for syndrome calculating ecc controllers which need a special oob layout + */ +static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf) +{ + int i, eccsize = chip->ecc.size; + int eccbytes = chip->ecc.bytes; + int eccsteps = chip->ecc.steps; + uint8_t *p = buf; + uint8_t *ecc_calc = chip->buffers.ecccalc; + uint8_t *ecc_code = chip->buffers.ecccode; + int *eccpos = chip->ecc.layout->eccpos; + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + chip->ecc.hwctl(mtd, NAND_ECC_READ); + chip->read_buf(mtd, p, eccsize); + chip->ecc.calculate(mtd, p, &ecc_calc[i]); + } + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); + + for (i = 0; i < chip->ecc.total; i++) + ecc_code[i] = chip->oob_poi[eccpos[i]]; + + eccsteps = chip->ecc.steps; + p = buf; + + for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + int stat; + + stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); + if (stat == -1) + mtd->ecc_stats.failed++; + else + mtd->ecc_stats.corrected += stat; } + return 0; +} - /* Write out OOB data */ - if (this->options & NAND_HWECC_SYNDROME) - this->write_buf(mtd, &oob_buf[oobsel->eccbytes], mtd->oobsize - oobsel->eccbytes); - else - this->write_buf(mtd, oob_buf, mtd->oobsize); +/** + * nand_read_page_syndrome - {REPLACABLE] hardware ecc syndrom based page read + * @mtd: mtd info structure + * @chip: nand chip info structure + * @buf: buffer to store read data + * + * The hw generator calculates the error syndrome automatically. Therefor + * we need a special oob layout and handling. + */ +static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf) +{ + int i, eccsize = chip->ecc.size; + int eccbytes = chip->ecc.bytes; + int eccsteps = chip->ecc.steps; + uint8_t *p = buf; + uint8_t *oob = chip->oob_poi; - /* Send command to actually program the data */ - this->cmdfunc (mtd, cached ? NAND_CMD_CACHEDPROG : NAND_CMD_PAGEPROG, -1, -1); + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + int stat; - if (!cached) { - /* call wait ready function */ - status = this->waitfunc (mtd, this, FL_WRITING); + chip->ecc.hwctl(mtd, NAND_ECC_READ); + chip->read_buf(mtd, p, eccsize); - /* See if operation failed and additional status checks are available */ - if ((status & NAND_STATUS_FAIL) && (this->errstat)) { - status = this->errstat(mtd, this, FL_WRITING, status, page); + if (chip->ecc.prepad) { + chip->read_buf(mtd, oob, chip->ecc.prepad); + oob += chip->ecc.prepad; } - /* See if device thinks it succeeded */ - if (status & NAND_STATUS_FAIL) { - DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write, page 0x%08x, ", __FUNCTION__, page); - return -EIO; + chip->ecc.hwctl(mtd, NAND_ECC_READSYN); + chip->read_buf(mtd, oob, eccbytes); + stat = chip->ecc.correct(mtd, p, oob, NULL); + + if (stat == -1) + mtd->ecc_stats.failed++; + else + mtd->ecc_stats.corrected += stat; + + oob += eccbytes; + + if (chip->ecc.postpad) { + chip->read_buf(mtd, oob, chip->ecc.postpad); + oob += chip->ecc.postpad; } - } else { - /* FIXME: Implement cached programming ! */ - /* wait until cache is ready*/ - // status = this->waitfunc (mtd, this, FL_CACHEDRPG); } + + /* Calculate remaining oob bytes */ + i = oob - chip->oob_poi; + if (i) + chip->read_buf(mtd, oob, i); + return 0; } -#ifdef CONFIG_MTD_NAND_VERIFY_WRITE /** - * nand_verify_pages - [GENERIC] verify the chip contents after a write - * @mtd: MTD device structure - * @this: NAND chip structure - * @page: startpage inside the chip, must be called with (page & this->pagemask) - * @numpages: number of pages to verify - * @oob_buf: out of band data buffer - * @oobsel: out of band selecttion structre - * @chipnr: number of the current chip - * @oobmode: 1 = full buffer verify, 0 = ecc only - * - * The NAND device assumes that it is always writing to a cleanly erased page. - * Hence, it performs its internal write verification only on bits that - * transitioned from 1 to 0. The device does NOT verify the whole page on a - * byte by byte basis. It is possible that the page was not completely erased - * or the page is becoming unusable due to wear. The read with ECC would catch - * the error later when the ECC page check fails, but we would rather catch - * it early in the page write stage. Better to write no data than invalid data. - */ -static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages, - u_char *oob_buf, struct nand_oobinfo *oobsel, int chipnr, int oobmode) -{ - int i, j, datidx = 0, oobofs = 0, res = -EIO; - int eccsteps = this->eccsteps; - int hweccbytes; - u_char oobdata[64]; - - hweccbytes = (this->options & NAND_HWECC_SYNDROME) ? (oobsel->eccbytes / eccsteps) : 0; - - /* Send command to read back the first page */ - this->cmdfunc (mtd, NAND_CMD_READ0, 0, page); - - for(;;) { - for (j = 0; j < eccsteps; j++) { - /* Loop through and verify the data */ - if (this->verify_buf(mtd, &this->data_poi[datidx], mtd->eccsize)) { - DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page); - goto out; - } - datidx += mtd->eccsize; - /* Have we a hw generator layout ? */ - if (!hweccbytes) - continue; - if (this->verify_buf(mtd, &this->oob_buf[oobofs], hweccbytes)) { - DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page); - goto out; - } - oobofs += hweccbytes; - } - - /* check, if we must compare all data or if we just have to - * compare the ecc bytes - */ - if (oobmode) { - if (this->verify_buf(mtd, &oob_buf[oobofs], mtd->oobsize - hweccbytes * eccsteps)) { - DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page); - goto out; - } - } else { - /* Read always, else autoincrement fails */ - this->read_buf(mtd, oobdata, mtd->oobsize - hweccbytes * eccsteps); + * nand_transfer_oob - [Internal] Transfer oob to client buffer + * @chip: nand chip structure + * @ops: oob ops structure + */ +static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob, + struct mtd_oob_ops *ops) +{ + size_t len = ops->ooblen; - if (oobsel->useecc != MTD_NANDECC_OFF && !hweccbytes) { - int ecccnt = oobsel->eccbytes; + switch(ops->mode) { - for (i = 0; i < ecccnt; i++) { - int idx = oobsel->eccpos[i]; - if (oobdata[idx] != oob_buf[oobofs + idx] ) { - DEBUG (MTD_DEBUG_LEVEL0, - "%s: Failed ECC write " - "verify, page 0x%08x, " "%6i bytes were succesful\n", __FUNCTION__, page, i); - goto out; - } - } - } - } - oobofs += mtd->oobsize - hweccbytes * eccsteps; - page++; - numpages--; - - /* Apply delay or wait for ready/busy pin - * Do this before the AUTOINCR check, so no problems - * arise if a chip which does auto increment - * is marked as NOAUTOINCR by the board driver. - * Do this also before returning, so the chip is - * ready for the next command. - */ - if (!this->dev_ready) - udelay (this->chip_delay); - else - nand_wait_ready(mtd); + case MTD_OOB_PLACE: + case MTD_OOB_RAW: + memcpy(oob, chip->oob_poi + ops->ooboffs, len); + return oob + len; - /* All done, return happy */ - if (!numpages) - return 0; + case MTD_OOB_AUTO: { + struct nand_oobfree *free = chip->ecc.layout->oobfree; + size_t bytes; + for(; free->length && len; free++, len -= bytes) { + bytes = min(len, free->length); - /* Check, if the chip supports auto page increment */ - if (!NAND_CANAUTOINCR(this)) - this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page); + memcpy(oob, chip->oob_poi + free->offset, bytes); + oob += bytes; + } + return oob; } - /* - * Terminate the read command. We come here in case of an error - * So we must issue a reset command. - */ -out: - this->cmdfunc (mtd, NAND_CMD_RESET, -1, -1); - return res; + default: + BUG(); + } + return NULL; } -#endif /** - * nand_read - [MTD Interface] MTD compability function for nand_do_read_ecc - * @mtd: MTD device structure - * @from: offset to read from - * @len: number of bytes to read - * @retlen: pointer to variable to store the number of read bytes - * @buf: the databuffer to put data + * nand_do_read_ops - [Internal] Read data with ECC * - * This function simply calls nand_do_read_ecc with oob buffer and oobsel = NULL - * and flags = 0xff - */ -static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf) -{ - return nand_do_read_ecc (mtd, from, len, retlen, buf, NULL, &mtd->oobinfo, 0xff); -} - - -/** - * nand_read_ecc - [MTD Interface] MTD compability function for nand_do_read_ecc * @mtd: MTD device structure * @from: offset to read from - * @len: number of bytes to read - * @retlen: pointer to variable to store the number of read bytes - * @buf: the databuffer to put data - * @oob_buf: filesystem supplied oob data buffer - * @oobsel: oob selection structure * - * This function simply calls nand_do_read_ecc with flags = 0xff + * Internal function. Called with chip held. */ -static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, - size_t * retlen, u_char * buf, u_char * oob_buf, struct nand_oobinfo *oobsel) +static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, + struct mtd_oob_ops *ops) { - /* use userspace supplied oobinfo, if zero */ - if (oobsel == NULL) - oobsel = &mtd->oobinfo; - return nand_do_read_ecc(mtd, from, len, retlen, buf, oob_buf, oobsel, 0xff); -} - - -/** - * nand_do_read_ecc - [MTD Interface] Read data with ECC - * @mtd: MTD device structure - * @from: offset to read from - * @len: number of bytes to read - * @retlen: pointer to variable to store the number of read bytes - * @buf: the databuffer to put data - * @oob_buf: filesystem supplied oob data buffer (can be NULL) - * @oobsel: oob selection structure - * @flags: flag to indicate if nand_get_device/nand_release_device should be preformed - * and how many corrected error bits are acceptable: - * bits 0..7 - number of tolerable errors - * bit 8 - 0 == do not get/release chip, 1 == get/release chip - * - * NAND read with ECC - */ -int nand_do_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, - size_t * retlen, u_char * buf, u_char * oob_buf, - struct nand_oobinfo *oobsel, int flags) -{ - - int i, j, col, realpage, page, end, ecc, chipnr, sndcmd = 1; - int read = 0, oob = 0, ecc_status = 0, ecc_failed = 0; - struct nand_chip *this = mtd->priv; - u_char *data_poi, *oob_data = oob_buf; - u_char ecc_calc[32]; - u_char ecc_code[32]; - int eccmode, eccsteps; - int *oob_config, datidx; - int blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1; - int eccbytes; - int compareecc = 1; - int oobreadlen; - - - DEBUG (MTD_DEBUG_LEVEL3, "nand_read_ecc: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len); - - /* Do not allow reads past end of device */ - if ((from + len) > mtd->size) { - DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: Attempt read beyond end of device\n"); - *retlen = 0; - return -EINVAL; - } - - /* Grab the lock and see if the device is available */ - if (flags & NAND_GET_DEVICE) - nand_get_device (this, mtd, FL_READING); - - /* Autoplace of oob data ? Use the default placement scheme */ - if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) - oobsel = this->autooob; - - eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE; - oob_config = oobsel->eccpos; - - /* Select the NAND device */ - chipnr = (int)(from >> this->chip_shift); - this->select_chip(mtd, chipnr); - - /* First we calculate the starting page */ - realpage = (int) (from >> this->page_shift); - page = realpage & this->pagemask; - - /* Get raw starting column */ - col = from & (mtd->oobblock - 1); + int chipnr, page, realpage, col, bytes, aligned; + struct nand_chip *chip = mtd->priv; + struct mtd_ecc_stats stats; + int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1; + int sndcmd = 1; + int ret = 0; + uint32_t readlen = ops->len; + uint8_t *bufpoi, *oob, *buf; - end = mtd->oobblock; - ecc = this->eccsize; - eccbytes = this->eccbytes; + stats = mtd->ecc_stats; - if ((eccmode == NAND_ECC_NONE) || (this->options & NAND_HWECC_SYNDROME)) - compareecc = 0; + chipnr = (int)(from >> chip->chip_shift); + chip->select_chip(mtd, chipnr); - oobreadlen = mtd->oobsize; - if (this->options & NAND_HWECC_SYNDROME) - oobreadlen -= oobsel->eccbytes; + realpage = (int)(from >> chip->page_shift); + page = realpage & chip->pagemask; - /* Loop until all data read */ - while (read < len) { + col = (int)(from & (mtd->writesize - 1)); + chip->oob_poi = chip->buffers.oobrbuf; - int aligned = (!col && (len - read) >= end); - /* - * If the read is not page aligned, we have to read into data buffer - * due to ecc, else we read into return buffer direct - */ - if (aligned) - data_poi = &buf[read]; - else - data_poi = this->data_buf; + buf = ops->datbuf; + oob = ops->oobbuf; - /* Check, if we have this page in the buffer - * - * FIXME: Make it work when we must provide oob data too, - * check the usage of data_buf oob field - */ - if (realpage == this->pagebuf && !oob_buf) { - /* aligned read ? */ - if (aligned) - memcpy (data_poi, this->data_buf, end); - goto readdata; - } + while(1) { + bytes = min(mtd->writesize - col, readlen); + aligned = (bytes == mtd->writesize); - /* Check, if we must send the read command */ - if (sndcmd) { - this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page); - sndcmd = 0; - } + /* Is the current page in the buffer ? */ + if (realpage != chip->pagebuf || oob) { + bufpoi = aligned ? buf : chip->buffers.databuf; - /* get oob area, if we have no oob buffer from fs-driver */ - if (!oob_buf || oobsel->useecc == MTD_NANDECC_AUTOPLACE || - oobsel->useecc == MTD_NANDECC_AUTOPL_USR) - oob_data = &this->data_buf[end]; - - eccsteps = this->eccsteps; - - switch (eccmode) { - case NAND_ECC_NONE: { /* No ECC, Read in a page */ - static unsigned long lastwhinge = 0; - if ((lastwhinge / HZ) != (jiffies / HZ)) { - printk (KERN_WARNING "Reading data from NAND FLASH without ECC is not recommended\n"); - lastwhinge = jiffies; + if (likely(sndcmd)) { + chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page); + sndcmd = 0; } - this->read_buf(mtd, data_poi, end); - break; - } - case NAND_ECC_SOFT: /* Software ECC 3/256: Read in a page + oob data */ - this->read_buf(mtd, data_poi, end); - for (i = 0, datidx = 0; eccsteps; eccsteps--, i+=3, datidx += ecc) - this->calculate_ecc(mtd, &data_poi[datidx], &ecc_calc[i]); - break; + /* Now read the page into the buffer */ + ret = chip->ecc.read_page(mtd, chip, bufpoi); + if (ret < 0) + break; - default: - for (i = 0, datidx = 0; eccsteps; eccsteps--, i+=eccbytes, datidx += ecc) { - this->enable_hwecc(mtd, NAND_ECC_READ); - this->read_buf(mtd, &data_poi[datidx], ecc); - - /* HW ecc with syndrome calculation must read the - * syndrome from flash immidiately after the data */ - if (!compareecc) { - /* Some hw ecc generators need to know when the - * syndrome is read from flash */ - this->enable_hwecc(mtd, NAND_ECC_READSYN); - this->read_buf(mtd, &oob_data[i], eccbytes); - /* We calc error correction directly, it checks the hw - * generator for an error, reads back the syndrome and - * does the error correction on the fly */ - ecc_status = this->correct_data(mtd, &data_poi[datidx], &oob_data[i], &ecc_code[i]); - if ((ecc_status == -1) || (ecc_status > (flags && 0xff))) { - DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " - "Failed ECC read, page 0x%08x on chip %d\n", page, chipnr); - ecc_failed++; - } - } else { - this->calculate_ecc(mtd, &data_poi[datidx], &ecc_calc[i]); - } + /* Transfer not aligned data */ + if (!aligned) { + chip->pagebuf = realpage; + memcpy(buf, chip->buffers.databuf + col, bytes); } - break; - } - /* read oobdata */ - this->read_buf(mtd, &oob_data[mtd->oobsize - oobreadlen], oobreadlen); + buf += bytes; - /* Skip ECC check, if not requested (ECC_NONE or HW_ECC with syndromes) */ - if (!compareecc) - goto readoob; - - /* Pick the ECC bytes out of the oob data */ - for (j = 0; j < oobsel->eccbytes; j++) - ecc_code[j] = oob_data[oob_config[j]]; - - /* correct data, if neccecary */ - for (i = 0, j = 0, datidx = 0; i < this->eccsteps; i++, datidx += ecc) { - ecc_status = this->correct_data(mtd, &data_poi[datidx], &ecc_code[j], &ecc_calc[j]); - - /* Get next chunk of ecc bytes */ - j += eccbytes; - - /* Check, if we have a fs supplied oob-buffer, - * This is the legacy mode. Used by YAFFS1 - * Should go away some day - */ - if (oob_buf && oobsel->useecc == MTD_NANDECC_PLACE) { - int *p = (int *)(&oob_data[mtd->oobsize]); - p[i] = ecc_status; + if (unlikely(oob)) { + /* Raw mode does data:oob:data:oob */ + if (ops->mode != MTD_OOB_RAW) + oob = nand_transfer_oob(chip, oob, ops); + else + buf = nand_transfer_oob(chip, buf, ops); } - if ((ecc_status == -1) || (ecc_status > (flags && 0xff))) { - DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " "Failed ECC read, page 0x%08x\n", page); - ecc_failed++; + if (!(chip->options & NAND_NO_READRDY)) { + /* + * Apply delay or wait for ready/busy pin. Do + * this before the AUTOINCR check, so no + * problems arise if a chip which does auto + * increment is marked as NOAUTOINCR by the + * board driver. + */ + if (!chip->dev_ready) + udelay(chip->chip_delay); + else + nand_wait_ready(mtd); } + } else { + memcpy(buf, chip->buffers.databuf + col, bytes); + buf += bytes; } - readoob: - /* check, if we have a fs supplied oob-buffer */ - if (oob_buf) { - /* without autoplace. Legacy mode used by YAFFS1 */ - switch(oobsel->useecc) { - case MTD_NANDECC_AUTOPLACE: - case MTD_NANDECC_AUTOPL_USR: - /* Walk through the autoplace chunks */ - for (i = 0; oobsel->oobfree[i][1]; i++) { - int from = oobsel->oobfree[i][0]; - int num = oobsel->oobfree[i][1]; - memcpy(&oob_buf[oob], &oob_data[from], num); - oob += num; - } - break; - case MTD_NANDECC_PLACE: - /* YAFFS1 legacy mode */ - oob_data += this->eccsteps * sizeof (int); - default: - oob_data += mtd->oobsize; - } - } - readdata: - /* Partial page read, transfer data into fs buffer */ - if (!aligned) { - for (j = col; j < end && read < len; j++) - buf[read++] = data_poi[j]; - this->pagebuf = realpage; - } else - read += mtd->oobblock; - - /* Apply delay or wait for ready/busy pin - * Do this before the AUTOINCR check, so no problems - * arise if a chip which does auto increment - * is marked as NOAUTOINCR by the board driver. - */ - if (!this->dev_ready) - udelay (this->chip_delay); - else - nand_wait_ready(mtd); + readlen -= bytes; - if (read == len) + if (!readlen) break; /* For subsequent reads align to page boundary. */ @@ -1345,701 +1015,670 @@ int nand_do_read_ecc (struct mtd_info *m /* Increment page address */ realpage++; - page = realpage & this->pagemask; + page = realpage & chip->pagemask; /* Check, if we cross a chip boundary */ if (!page) { chipnr++; - this->select_chip(mtd, -1); - this->select_chip(mtd, chipnr); + chip->select_chip(mtd, -1); + chip->select_chip(mtd, chipnr); } + /* Check, if the chip supports auto page increment * or if we have hit a block boundary. - */ - if (!NAND_CANAUTOINCR(this) || !(page & blockcheck)) + */ + if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck)) sndcmd = 1; } - /* Deselect and wake up anyone waiting on the device */ - if (flags & NAND_GET_DEVICE) - nand_release_device(mtd); + ops->retlen = ops->len - (size_t) readlen; - /* - * Return success, if no ECC failures, else -EBADMSG - * fs driver will take care of that, because - * retlen == desired len and result == -EBADMSG - */ - *retlen = read; - return ecc_failed ? -EBADMSG : 0; + if (ret) + return ret; + + if (mtd->ecc_stats.failed - stats.failed) + return -EBADMSG; + + return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0; } /** - * nand_read_oob - [MTD Interface] NAND read out-of-band + * nand_read - [MTD Interface] MTD compability function for nand_do_read_ecc * @mtd: MTD device structure * @from: offset to read from * @len: number of bytes to read * @retlen: pointer to variable to store the number of read bytes * @buf: the databuffer to put data * - * NAND read out-of-band data from the spare area + * Get hold of the chip and call nand_do_read */ -static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf) +static int nand_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, uint8_t *buf) { - int i, col, page, chipnr; - struct nand_chip *this = mtd->priv; - int blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1; - - DEBUG (MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len); - - /* Shift to get page */ - page = (int)(from >> this->page_shift); - chipnr = (int)(from >> this->chip_shift); - - /* Mask to get column */ - col = from & (mtd->oobsize - 1); - - /* Initialize return length value */ - *retlen = 0; + struct nand_chip *chip = mtd->priv; + int ret; /* Do not allow reads past end of device */ - if ((from + len) > mtd->size) { - DEBUG (MTD_DEBUG_LEVEL0, "nand_read_oob: Attempt read beyond end of device\n"); - *retlen = 0; + if ((from + len) > mtd->size) return -EINVAL; - } - - /* Grab the lock and see if the device is available */ - nand_get_device (this, mtd , FL_READING); - - /* Select the NAND device */ - this->select_chip(mtd, chipnr); + if (!len) + return 0; - /* Send the read command */ - this->cmdfunc (mtd, NAND_CMD_READOOB, col, page & this->pagemask); - /* - * Read the data, if we read more than one page - * oob data, let the device transfer the data ! - */ - i = 0; - while (i < len) { - int thislen = mtd->oobsize - col; - thislen = min_t(int, thislen, len); - this->read_buf(mtd, &buf[i], thislen); - i += thislen; - - /* Read more ? */ - if (i < len) { - page++; - col = 0; - - /* Check, if we cross a chip boundary */ - if (!(page & this->pagemask)) { - chipnr++; - this->select_chip(mtd, -1); - this->select_chip(mtd, chipnr); - } + nand_get_device(chip, mtd, FL_READING); - /* Apply delay or wait for ready/busy pin - * Do this before the AUTOINCR check, so no problems - * arise if a chip which does auto increment - * is marked as NOAUTOINCR by the board driver. - */ - if (!this->dev_ready) - udelay (this->chip_delay); - else - nand_wait_ready(mtd); + chip->ops.len = len; + chip->ops.datbuf = buf; + chip->ops.oobbuf = NULL; - /* Check, if the chip supports auto page increment - * or if we have hit a block boundary. - */ - if (!NAND_CANAUTOINCR(this) || !(page & blockcheck)) { - /* For subsequent page reads set offset to 0 */ - this->cmdfunc (mtd, NAND_CMD_READOOB, 0x0, page & this->pagemask); - } - } - } + ret = nand_do_read_ops(mtd, from, &chip->ops); - /* Deselect and wake up anyone waiting on the device */ nand_release_device(mtd); - /* Return happy */ - *retlen = len; - return 0; + *retlen = chip->ops.retlen; + return ret; } /** - * nand_read_raw - [GENERIC] Read raw data including oob into buffer + * nand_do_read_oob - [Intern] NAND read out-of-band * @mtd: MTD device structure - * @buf: temporary buffer * @from: offset to read from - * @len: number of bytes to read - * @ooblen: number of oob data bytes to read + * @ops: oob operations description structure * - * Read raw data including oob into buffer + * NAND read out-of-band data from the spare area */ -int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len, size_t ooblen) +static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, + struct mtd_oob_ops *ops) { - struct nand_chip *this = mtd->priv; - int page = (int) (from >> this->page_shift); - int chip = (int) (from >> this->chip_shift); - int sndcmd = 1; - int cnt = 0; - int pagesize = mtd->oobblock + mtd->oobsize; - int blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1; + int col, page, realpage, chipnr, sndcmd = 1; + struct nand_chip *chip = mtd->priv; + int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1; + int direct, bytes, readlen = ops->len; + uint8_t *bufpoi, *buf = ops->oobbuf; - /* Do not allow reads past end of device */ - if ((from + len) > mtd->size) { - DEBUG (MTD_DEBUG_LEVEL0, "nand_read_raw: Attempt read beyond end of device\n"); - return -EINVAL; - } + DEBUG(MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08x, len = %i\n", + (unsigned int)from, (int)len); - /* Grab the lock and see if the device is available */ - nand_get_device (this, mtd , FL_READING); + chipnr = (int)(from >> chip->chip_shift); + chip->select_chip(mtd, chipnr); - this->select_chip (mtd, chip); + /* Shift to get page */ + realpage = (int)(from >> chip->page_shift); + page = realpage & chip->pagemask; - /* Add requested oob length */ - len += ooblen; + if (ops->mode != MTD_OOB_AUTO) { + col = ops->ooboffs; + direct = 1; + } else { + col = 0; + direct = 0; + } - while (len) { - if (sndcmd) - this->cmdfunc (mtd, NAND_CMD_READ0, 0, page & this->pagemask); - sndcmd = 0; - - this->read_buf (mtd, &buf[cnt], pagesize); - - len -= pagesize; - cnt += pagesize; - page++; + while(1) { + bytes = direct ? ops->ooblen : mtd->oobsize; + bufpoi = direct ? buf : chip->buffers.oobrbuf; - if (!this->dev_ready) - udelay (this->chip_delay); - else - nand_wait_ready(mtd); + if (likely(sndcmd)) { + chip->cmdfunc(mtd, NAND_CMD_READOOB, col, page); + sndcmd = 0; + } - /* Check, if the chip supports auto page increment */ - if (!NAND_CANAUTOINCR(this) || !(page & blockcheck)) - sndcmd = 1; - } + chip->read_buf(mtd, bufpoi, bytes); - /* Deselect and wake up anyone waiting on the device */ - nand_release_device(mtd); - return 0; -} + if (unlikely(!direct)) + buf = nand_transfer_oob(chip, buf, ops); + else + buf += ops->ooblen; + readlen -= ops->ooblen; + if (!readlen) + break; -/** - * nand_prepare_oobbuf - [GENERIC] Prepare the out of band buffer - * @mtd: MTD device structure - * @fsbuf: buffer given by fs driver - * @oobsel: out of band selection structre - * @autoplace: 1 = place given buffer into the oob bytes - * @numpages: number of pages to prepare - * - * Return: - * 1. Filesystem buffer available and autoplacement is off, - * return filesystem buffer - * 2. No filesystem buffer or autoplace is off, return internal - * buffer - * 3. Filesystem buffer is given and autoplace selected - * put data from fs buffer into internal buffer and - * retrun internal buffer - * - * Note: The internal buffer is filled with 0xff. This must - * be done only once, when no autoplacement happens - * Autoplacement sets the buffer dirty flag, which - * forces the 0xff fill before using the buffer again. + if (!(chip->options & NAND_NO_READRDY)) { + /* + * Apply delay or wait for ready/busy pin. Do this + * before the AUTOINCR check, so no problems arise if a + * chip which does auto increment is marked as + * NOAUTOINCR by the board driver. + */ + if (!chip->dev_ready) + udelay(chip->chip_delay); + else + nand_wait_ready(mtd); + } + + /* Increment page address */ + realpage++; + + page = realpage & chip->pagemask; + /* Check, if we cross a chip boundary */ + if (!page) { + chipnr++; + chip->select_chip(mtd, -1); + chip->select_chip(mtd, chipnr); + } + + /* Check, if the chip supports auto page increment + * or if we have hit a block boundary. + */ + if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck)) + sndcmd = 1; + } + + ops->retlen = ops->len; + return 0; +} + +/** + * nand_read_oob - [MTD Interface] NAND read data and/or out-of-band + * @mtd: MTD device structure + * @from: offset to read from + * @ops: oob operation description structure * -*/ -static u_char * nand_prepare_oobbuf (struct mtd_info *mtd, u_char *fsbuf, struct nand_oobinfo *oobsel, - int autoplace, int numpages) + * NAND read data and/or out-of-band data + */ +static int nand_read_oob(struct mtd_info *mtd, loff_t from, + struct mtd_oob_ops *ops) { - struct nand_chip *this = mtd->priv; - int i, len, ofs; + int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf) = NULL; + struct nand_chip *chip = mtd->priv; + int ret = -ENOTSUPP; - /* Zero copy fs supplied buffer */ - if (fsbuf && !autoplace) - return fsbuf; + ops->retlen = 0; - /* Check, if the buffer must be filled with ff again */ - if (this->oobdirty) { - memset (this->oob_buf, 0xff, - mtd->oobsize << (this->phys_erase_shift - this->page_shift)); - this->oobdirty = 0; + /* Do not allow reads past end of device */ + if ((from + ops->len) > mtd->size) { + DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: " + "Attempt read beyond end of device\n"); + return -EINVAL; } - /* If we have no autoplacement or no fs buffer use the internal one */ - if (!autoplace || !fsbuf) - return this->oob_buf; + nand_get_device(chip, mtd, FL_READING); - /* Walk through the pages and place the data */ - this->oobdirty = 1; - ofs = 0; - while (numpages--) { - for (i = 0, len = 0; len < mtd->oobavail; i++) { - int to = ofs + oobsel->oobfree[i][0]; - int num = oobsel->oobfree[i][1]; - memcpy (&this->oob_buf[to], fsbuf, num); - len += num; - fsbuf += num; - } - ofs += mtd->oobavail; + switch(ops->mode) { + case MTD_OOB_PLACE: + case MTD_OOB_AUTO: + break; + + case MTD_OOB_RAW: + /* Replace the read_page algorithm temporary */ + read_page = chip->ecc.read_page; + chip->ecc.read_page = nand_read_page_raw; + break; + + default: + goto out; } - return this->oob_buf; + + if (!ops->datbuf) + ret = nand_do_read_oob(mtd, from, ops); + else + ret = nand_do_read_ops(mtd, from, ops); + + if (unlikely(ops->mode == MTD_OOB_RAW)) + chip->ecc.read_page = read_page; + out: + nand_release_device(mtd); + return ret; } -#define NOTALIGNED(x) (x & (mtd->oobblock-1)) != 0 /** - * nand_write - [MTD Interface] compability function for nand_write_ecc + * nand_write_page_raw - [Intern] raw page write function + * @mtd: mtd info structure + * @chip: nand chip info structure + * @buf: data buffer + */ +static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf) +{ + chip->write_buf(mtd, buf, mtd->writesize); + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); +} + +/** + * nand_write_page_swecc - {REPLACABLE] software ecc based page write function + * @mtd: mtd info structure + * @chip: nand chip info structure + * @buf: data buffer + */ +static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf) +{ + int i, eccsize = chip->ecc.size; + int eccbytes = chip->ecc.bytes; + int eccsteps = chip->ecc.steps; + uint8_t *ecc_calc = chip->buffers.ecccalc; + const uint8_t *p = buf; + int *eccpos = chip->ecc.layout->eccpos; + + /* Software ecc calculation */ + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) + chip->ecc.calculate(mtd, p, &ecc_calc[i]); + + for (i = 0; i < chip->ecc.total; i++) + chip->oob_poi[eccpos[i]] = ecc_calc[i]; + + nand_write_page_raw(mtd, chip, buf); +} + +/** + * nand_write_page_hwecc - {REPLACABLE] hardware ecc based page write function + * @mtd: mtd info structure + * @chip: nand chip info structure + * @buf: data buffer + */ +static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf) +{ + int i, eccsize = chip->ecc.size; + int eccbytes = chip->ecc.bytes; + int eccsteps = chip->ecc.steps; + uint8_t *ecc_calc = chip->buffers.ecccalc; + const uint8_t *p = buf; + int *eccpos = chip->ecc.layout->eccpos; + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + chip->ecc.hwctl(mtd, NAND_ECC_WRITE); + chip->write_buf(mtd, p, eccsize); + chip->ecc.calculate(mtd, p, &ecc_calc[i]); + } + + for (i = 0; i < chip->ecc.total; i++) + chip->oob_poi[eccpos[i]] = ecc_calc[i]; + + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); +} + +/** + * nand_write_page_syndrome - {REPLACABLE] hardware ecc syndrom based page write + * @mtd: mtd info structure + * @chip: nand chip info structure + * @buf: data buffer + * + * The hw generator calculates the error syndrome automatically. Therefor + * we need a special oob layout and handling. + */ +static void nand_write_page_syndrome(struct mtd_info *mtd, + struct nand_chip *chip, const uint8_t *buf) +{ + int i, eccsize = chip->ecc.size; + int eccbytes = chip->ecc.bytes; + int eccsteps = chip->ecc.steps; + const uint8_t *p = buf; + uint8_t *oob = chip->oob_poi; + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + + chip->ecc.hwctl(mtd, NAND_ECC_WRITE); + chip->write_buf(mtd, p, eccsize); + + if (chip->ecc.prepad) { + chip->write_buf(mtd, oob, chip->ecc.prepad); + oob += chip->ecc.prepad; + } + + chip->ecc.calculate(mtd, p, oob); + chip->write_buf(mtd, oob, eccbytes); + oob += eccbytes; + + if (chip->ecc.postpad) { + chip->write_buf(mtd, oob, chip->ecc.postpad); + oob += chip->ecc.postpad; + } + } + + /* Calculate remaining oob bytes */ + i = oob - chip->oob_poi; + if (i) + chip->write_buf(mtd, oob, i); +} + +/** + * nand_write_page - [INTERNAL] write one page * @mtd: MTD device structure - * @to: offset to write to - * @len: number of bytes to write - * @retlen: pointer to variable to store the number of written bytes + * @chip: NAND chip descriptor * @buf: the data to write - * - * This function simply calls nand_write_ecc with oob buffer and oobsel = NULL - * -*/ -static int nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf) + * @page: page number to write + * @cached: cached programming + */ +static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int page, int cached) { - return (nand_write_ecc (mtd, to, len, retlen, buf, NULL, NULL)); + int status; + + chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); + + chip->ecc.write_page(mtd, chip, buf); + + /* + * Cached progamming disabled for now, Not sure if its worth the + * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s) + */ + cached = 0; + + if (!cached || !(chip->options & NAND_CACHEPRG)) { + + chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); + status = chip->waitfunc(mtd, chip, FL_WRITING); + /* + * See if operation failed and additional status checks are + * available + */ + if ((status & NAND_STATUS_FAIL) && (chip->errstat)) + status = chip->errstat(mtd, chip, FL_WRITING, status, + page); + + if (status & NAND_STATUS_FAIL) + return -EIO; + } else { + chip->cmdfunc(mtd, NAND_CMD_CACHEDPROG, -1, -1); + status = chip->waitfunc(mtd, chip, FL_WRITING); + } + +#ifdef CONFIG_MTD_NAND_VERIFY_WRITE + /* Send command to read back the data */ + chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); + + if (chip->verify_buf(mtd, buf, mtd->writesize)) + return -EIO; +#endif + return 0; +} + +/** + * nand_fill_oob - [Internal] Transfer client buffer to oob + * @chip: nand chip structure + * @oob: oob data buffer + * @ops: oob ops structure + */ +static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob, + struct mtd_oob_ops *ops) +{ + size_t len = ops->ooblen; + + switch(ops->mode) { + + case MTD_OOB_PLACE: + case MTD_OOB_RAW: + memcpy(chip->oob_poi + ops->ooboffs, oob, len); + return oob + len; + + case MTD_OOB_AUTO: { + struct nand_oobfree *free = chip->ecc.layout->oobfree; + size_t bytes; + + for(; free->length && len; free++, len -= bytes) { + bytes = min(len, free->length); + memcpy(chip->oob_poi + free->offset, oob, bytes); + oob += bytes; + } + return oob; + } + default: + BUG(); + } + return NULL; } +#define NOTALIGNED(x) (x & (mtd->writesize-1)) != 0 + /** - * nand_write_ecc - [MTD Interface] NAND write with ECC + * nand_do_write_ops - [Internal] NAND write with ECC * @mtd: MTD device structure * @to: offset to write to - * @len: number of bytes to write - * @retlen: pointer to variable to store the number of written bytes - * @buf: the data to write - * @eccbuf: filesystem supplied oob data buffer - * @oobsel: oob selection structure + * @ops: oob operations description structure * * NAND write with ECC */ -static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len, - size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel) +static int nand_do_write_ops(struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops) { - int startpage, page, ret = -EIO, oob = 0, written = 0, chipnr; - int autoplace = 0, numpages, totalpages; - struct nand_chip *this = mtd->priv; - u_char *oobbuf, *bufstart; - int ppblock = (1 << (this->phys_erase_shift - this->page_shift)); - - DEBUG (MTD_DEBUG_LEVEL3, "nand_write_ecc: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len); - - /* Initialize retlen, in case of early exit */ - *retlen = 0; - - /* Do not allow write past end of device */ - if ((to + len) > mtd->size) { - DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Attempt to write past end of page\n"); - return -EINVAL; - } + int chipnr, realpage, page, blockmask; + struct nand_chip *chip = mtd->priv; + uint32_t writelen = ops->len; + uint8_t *oob = ops->oobbuf; + uint8_t *buf = ops->datbuf; + int bytes = mtd->writesize; + int ret; + + ops->retlen = 0; /* reject writes, which are not page aligned */ - if (NOTALIGNED (to) || NOTALIGNED(len)) { - printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n"); + if (NOTALIGNED(to) || NOTALIGNED(ops->len)) { + printk(KERN_NOTICE "nand_write: " + "Attempt to write not page aligned data\n"); return -EINVAL; } - /* Grab the lock and see if the device is available */ - nand_get_device (this, mtd, FL_WRITING); - - /* Calculate chipnr */ - chipnr = (int)(to >> this->chip_shift); - /* Select the NAND device */ - this->select_chip(mtd, chipnr); + if (!writelen) + return 0; /* Check, if it is write protected */ if (nand_check_wp(mtd)) - goto out; + return -EIO; - /* if oobsel is NULL, use chip defaults */ - if (oobsel == NULL) - oobsel = &mtd->oobinfo; - - /* Autoplace of oob data ? Use the default placement scheme */ - if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) { - oobsel = this->autooob; - autoplace = 1; - } - if (oobsel->useecc == MTD_NANDECC_AUTOPL_USR) - autoplace = 1; - - /* Setup variables and oob buffer */ - totalpages = len >> this->page_shift; - page = (int) (to >> this->page_shift); - /* Invalidate the page cache, if we write to the cached page */ - if (page <= this->pagebuf && this->pagebuf < (page + totalpages)) - this->pagebuf = -1; + chipnr = (int)(to >> chip->chip_shift); + chip->select_chip(mtd, chipnr); - /* Set it relative to chip */ - page &= this->pagemask; - startpage = page; - /* Calc number of pages we can write in one go */ - numpages = min (ppblock - (startpage & (ppblock - 1)), totalpages); - oobbuf = nand_prepare_oobbuf (mtd, eccbuf, oobsel, autoplace, numpages); - bufstart = (u_char *)buf; - - /* Loop until all data is written */ - while (written < len) { - - this->data_poi = (u_char*) &buf[written]; - /* Write one page. If this is the last page to write - * or the last page in this block, then use the - * real pageprogram command, else select cached programming - * if supported by the chip. - */ - ret = nand_write_page (mtd, this, page, &oobbuf[oob], oobsel, (--numpages > 0)); - if (ret) { - DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: write_page failed %d\n", ret); - goto out; - } - /* Next oob page */ - oob += mtd->oobsize; - /* Update written bytes count */ - written += mtd->oobblock; - if (written == len) - goto cmp; + realpage = (int)(to >> chip->page_shift); + page = realpage & chip->pagemask; + blockmask = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1; - /* Increment page address */ - page++; + /* Invalidate the page cache, when we write to the cached page */ + if (to <= (chip->pagebuf << chip->page_shift) && + (chip->pagebuf << chip->page_shift) < (to + ops->len)) + chip->pagebuf = -1; - /* Have we hit a block boundary ? Then we have to verify and - * if verify is ok, we have to setup the oob buffer for - * the next pages. - */ - if (!(page & (ppblock - 1))){ - int ofs; - this->data_poi = bufstart; - ret = nand_verify_pages (mtd, this, startpage, - page - startpage, - oobbuf, oobsel, chipnr, (eccbuf != NULL)); - if (ret) { - DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: verify_pages failed %d\n", ret); - goto out; - } - *retlen = written; + chip->oob_poi = chip->buffers.oobwbuf; - ofs = autoplace ? mtd->oobavail : mtd->oobsize; - if (eccbuf) - eccbuf += (page - startpage) * ofs; - totalpages -= page - startpage; - numpages = min (totalpages, ppblock); - page &= this->pagemask; - startpage = page; - oobbuf = nand_prepare_oobbuf (mtd, eccbuf, oobsel, - autoplace, numpages); - oob = 0; - /* Check, if we cross a chip boundary */ - if (!page) { - chipnr++; - this->select_chip(mtd, -1); - this->select_chip(mtd, chipnr); - } + while(1) { + int cached = writelen > bytes && page != blockmask; + + if (unlikely(oob)) + oob = nand_fill_oob(chip, oob, ops); + + ret = nand_write_page(mtd, chip, buf, page, cached); + if (ret) + break; + + writelen -= bytes; + if (!writelen) + break; + + buf += bytes; + realpage++; + + page = realpage & chip->pagemask; + /* Check, if we cross a chip boundary */ + if (!page) { + chipnr++; + chip->select_chip(mtd, -1); + chip->select_chip(mtd, chipnr); } } - /* Verify the remaining pages */ -cmp: - this->data_poi = bufstart; - ret = nand_verify_pages (mtd, this, startpage, totalpages, - oobbuf, oobsel, chipnr, (eccbuf != NULL)); - if (!ret) - *retlen = written; - else - DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: verify_pages failed %d\n", ret); -out: - /* Deselect and wake up anyone waiting on the device */ - nand_release_device(mtd); + if (unlikely(oob)) + memset(chip->oob_poi, 0xff, mtd->oobsize); + ops->retlen = ops->len - writelen; return ret; } - /** - * nand_write_oob - [MTD Interface] NAND write out-of-band + * nand_write - [MTD Interface] NAND write with ECC * @mtd: MTD device structure * @to: offset to write to * @len: number of bytes to write * @retlen: pointer to variable to store the number of written bytes * @buf: the data to write * - * NAND write out-of-band + * NAND write with ECC */ -static int nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf) +static int nand_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const uint8_t *buf) { - int column, page, status, ret = -EIO, chipnr; - struct nand_chip *this = mtd->priv; + struct nand_chip *chip = mtd->priv; + int ret; + + /* Do not allow reads past end of device */ + if ((to + len) > mtd->size) + return -EINVAL; + if (!len) + return 0; - DEBUG (MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len); + nand_get_device(chip, mtd, FL_READING); - /* Shift to get page */ - page = (int) (to >> this->page_shift); - chipnr = (int) (to >> this->chip_shift); + chip->ops.len = len; + chip->ops.datbuf = (uint8_t *)buf; + chip->ops.oobbuf = NULL; + + ret = nand_do_write_ops(mtd, to, &chip->ops); + + nand_release_device(mtd); - /* Mask to get column */ - column = to & (mtd->oobsize - 1); + *retlen = chip->ops.retlen; + return ret; +} + +/** + * nand_do_write_oob - [MTD Interface] NAND write out-of-band + * @mtd: MTD device structure + * @to: offset to write to + * @ops: oob operation description structure + * + * NAND write out-of-band + */ +static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops) +{ + int chipnr, page, status; + struct nand_chip *chip = mtd->priv; - /* Initialize return length value */ - *retlen = 0; + DEBUG(MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n", + (unsigned int)to, (int)ops->len); /* Do not allow write past end of page */ - if ((column + len) > mtd->oobsize) { - DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Attempt to write past end of page\n"); + if ((ops->ooboffs + ops->len) > mtd->oobsize) { + DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: " + "Attempt to write past end of page\n"); return -EINVAL; } - /* Grab the lock and see if the device is available */ - nand_get_device (this, mtd, FL_WRITING); + chipnr = (int)(to >> chip->chip_shift); + chip->select_chip(mtd, chipnr); - /* Select the NAND device */ - this->select_chip(mtd, chipnr); + /* Shift to get page */ + page = (int)(to >> chip->page_shift); - /* Reset the chip. Some chips (like the Toshiba TC5832DC found - in one of my DiskOnChip 2000 test units) will clear the whole - data page too if we don't do this. I have no clue why, but - I seem to have 'fixed' it in the doc2000 driver in - August 1999. dwmw2. */ - this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); + /* + * Reset the chip. Some chips (like the Toshiba TC5832DC found in one + * of my DiskOnChip 2000 test units) will clear the whole data page too + * if we don't do this. I have no clue why, but I seem to have 'fixed' + * it in the doc2000 driver in August 1999. dwmw2. + */ + chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); /* Check, if it is write protected */ if (nand_check_wp(mtd)) - goto out; + return -EROFS; /* Invalidate the page cache, if we write to the cached page */ - if (page == this->pagebuf) - this->pagebuf = -1; + if (page == chip->pagebuf) + chip->pagebuf = -1; - if (NAND_MUST_PAD(this)) { - /* Write out desired data */ - this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock, page & this->pagemask); - /* prepad 0xff for partial programming */ - this->write_buf(mtd, ffchars, column); - /* write data */ - this->write_buf(mtd, buf, len); - /* postpad 0xff for partial programming */ - this->write_buf(mtd, ffchars, mtd->oobsize - (len+column)); + if (ops->mode == MTD_OOB_AUTO || NAND_MUST_PAD(chip)) { + chip->oob_poi = chip->buffers.oobwbuf; + memset(chip->oob_poi, 0xff, mtd->oobsize); + nand_fill_oob(chip, ops->oobbuf, ops); + chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, + page & chip->pagemask); + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); + memset(chip->oob_poi, 0xff, mtd->oobsize); } else { - /* Write out desired data */ - this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock + column, page & this->pagemask); - /* write data */ - this->write_buf(mtd, buf, len); + chip->cmdfunc(mtd, NAND_CMD_SEQIN, + mtd->writesize + ops->ooboffs, + page & chip->pagemask); + chip->write_buf(mtd, ops->oobbuf, ops->len); } + /* Send command to program the OOB data */ - this->cmdfunc (mtd, NAND_CMD_PAGEPROG, -1, -1); + chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); - status = this->waitfunc (mtd, this, FL_WRITING); + status = chip->waitfunc(mtd, chip, FL_WRITING); /* See if device thinks it succeeded */ if (status & NAND_STATUS_FAIL) { - DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write, page 0x%08x\n", page); - ret = -EIO; - goto out; + DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: " + "Failed write, page 0x%08x\n", page); + return -EIO; } - /* Return happy */ - *retlen = len; + ops->retlen = ops->len; #ifdef CONFIG_MTD_NAND_VERIFY_WRITE - /* Send command to read back the data */ - this->cmdfunc (mtd, NAND_CMD_READOOB, column, page & this->pagemask); - - if (this->verify_buf(mtd, buf, len)) { - DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write verify, page 0x%08x\n", page); - ret = -EIO; - goto out; + if (ops->mode != MTD_OOB_AUTO) { + /* Send command to read back the data */ + chip->cmdfunc(mtd, NAND_CMD_READOOB, ops->ooboffs, + page & chip->pagemask); + + if (chip->verify_buf(mtd, ops->oobbuf, ops->len)) { + DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: " + "Failed write verify, page 0x%08x\n", page); + return -EIO; + } } #endif - ret = 0; -out: - /* Deselect and wake up anyone waiting on the device */ - nand_release_device(mtd); - - return ret; -} - - -/** - * nand_writev - [MTD Interface] compabilty function for nand_writev_ecc - * @mtd: MTD device structure - * @vecs: the iovectors to write - * @count: number of vectors - * @to: offset to write to - * @retlen: pointer to variable to store the number of written bytes - * - * NAND write with kvec. This just calls the ecc function - */ -static int nand_writev (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, - loff_t to, size_t * retlen) -{ - return (nand_writev_ecc (mtd, vecs, count, to, retlen, NULL, NULL)); + return 0; } /** - * nand_writev_ecc - [MTD Interface] write with iovec with ecc + * nand_write_oob - [MTD Interface] NAND write data and/or out-of-band * @mtd: MTD device structure - * @vecs: the iovectors to write - * @count: number of vectors - * @to: offset to write to - * @retlen: pointer to variable to store the number of written bytes - * @eccbuf: filesystem supplied oob data buffer - * @oobsel: oob selection structure - * - * NAND write with iovec with ecc + * @from: offset to read from + * @ops: oob operation description structure */ -static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, - loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel) +static int nand_write_oob(struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops) { - int i, page, len, total_len, ret = -EIO, written = 0, chipnr; - int oob, numpages, autoplace = 0, startpage; - struct nand_chip *this = mtd->priv; - int ppblock = (1 << (this->phys_erase_shift - this->page_shift)); - u_char *oobbuf, *bufstart; - - /* Preset written len for early exit */ - *retlen = 0; - - /* Calculate total length of data */ - total_len = 0; - for (i = 0; i < count; i++) - total_len += (int) vecs[i].iov_len; - - DEBUG (MTD_DEBUG_LEVEL3, - "nand_writev: to = 0x%08x, len = %i, count = %ld\n", (unsigned int) to, (unsigned int) total_len, count); - - /* Do not allow write past end of page */ - if ((to + total_len) > mtd->size) { - DEBUG (MTD_DEBUG_LEVEL0, "nand_writev: Attempted write past end of device\n"); + void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf) = NULL; + struct nand_chip *chip = mtd->priv; + int ret = -ENOTSUPP; + + ops->retlen = 0; + + /* Do not allow writes past end of device */ + if ((to + ops->len) > mtd->size) { + DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: " + "Attempt read beyond end of device\n"); return -EINVAL; } - /* reject writes, which are not page aligned */ - if (NOTALIGNED (to) || NOTALIGNED(total_len)) { - printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n"); - return -EINVAL; - } + nand_get_device(chip, mtd, FL_READING); - /* Grab the lock and see if the device is available */ - nand_get_device (this, mtd, FL_WRITING); + switch(ops->mode) { + case MTD_OOB_PLACE: + case MTD_OOB_AUTO: + break; - /* Get the current chip-nr */ - chipnr = (int) (to >> this->chip_shift); - /* Select the NAND device */ - this->select_chip(mtd, chipnr); + case MTD_OOB_RAW: + /* Replace the write_page algorithm temporary */ + write_page = chip->ecc.write_page; + chip->ecc.write_page = nand_write_page_raw; + break; - /* Check, if it is write protected */ - if (nand_check_wp(mtd)) + default: goto out; - - /* if oobsel is NULL, use chip defaults */ - if (oobsel == NULL) - oobsel = &mtd->oobinfo; - - /* Autoplace of oob data ? Use the default placement scheme */ - if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) { - oobsel = this->autooob; - autoplace = 1; } - if (oobsel->useecc == MTD_NANDECC_AUTOPL_USR) - autoplace = 1; - - /* Setup start page */ - page = (int) (to >> this->page_shift); - /* Invalidate the page cache, if we write to the cached page */ - if (page <= this->pagebuf && this->pagebuf < ((to + total_len) >> this->page_shift)) - this->pagebuf = -1; - - startpage = page & this->pagemask; - - /* Loop until all kvec' data has been written */ - len = 0; - while (count) { - /* If the given tuple is >= pagesize then - * write it out from the iov - */ - if ((vecs->iov_len - len) >= mtd->oobblock) { - /* Calc number of pages we can write - * out of this iov in one go */ - numpages = (vecs->iov_len - len) >> this->page_shift; - /* Do not cross block boundaries */ - numpages = min (ppblock - (startpage & (ppblock - 1)), numpages); - oobbuf = nand_prepare_oobbuf (mtd, NULL, oobsel, autoplace, numpages); - bufstart = (u_char *)vecs->iov_base; - bufstart += len; - this->data_poi = bufstart; - oob = 0; - for (i = 1; i <= numpages; i++) { - /* Write one page. If this is the last page to write - * then use the real pageprogram command, else select - * cached programming if supported by the chip. - */ - ret = nand_write_page (mtd, this, page & this->pagemask, - &oobbuf[oob], oobsel, i != numpages); - if (ret) - goto out; - this->data_poi += mtd->oobblock; - len += mtd->oobblock; - oob += mtd->oobsize; - page++; - } - /* Check, if we have to switch to the next tuple */ - if (len >= (int) vecs->iov_len) { - vecs++; - len = 0; - count--; - } - } else { - /* We must use the internal buffer, read data out of each - * tuple until we have a full page to write - */ - int cnt = 0; - while (cnt < mtd->oobblock) { - if (vecs->iov_base != NULL && vecs->iov_len) - this->data_buf[cnt++] = ((u_char *) vecs->iov_base)[len++]; - /* Check, if we have to switch to the next tuple */ - if (len >= (int) vecs->iov_len) { - vecs++; - len = 0; - count--; - } - } - this->pagebuf = page; - this->data_poi = this->data_buf; - bufstart = this->data_poi; - numpages = 1; - oobbuf = nand_prepare_oobbuf (mtd, NULL, oobsel, autoplace, numpages); - ret = nand_write_page (mtd, this, page & this->pagemask, - oobbuf, oobsel, 0); - if (ret) - goto out; - page++; - } - - this->data_poi = bufstart; - ret = nand_verify_pages (mtd, this, startpage, numpages, oobbuf, oobsel, chipnr, 0); - if (ret) - goto out; - written += mtd->oobblock * numpages; - /* All done ? */ - if (!count) - break; + if (!ops->datbuf) + ret = nand_do_write_oob(mtd, to, ops); + else + ret = nand_do_write_ops(mtd, to, ops); - startpage = page & this->pagemask; - /* Check, if we cross a chip boundary */ - if (!startpage) { - chipnr++; - this->select_chip(mtd, -1); - this->select_chip(mtd, chipnr); - } - } - ret = 0; -out: - /* Deselect and wake up anyone waiting on the device */ + if (unlikely(ops->mode == MTD_OOB_RAW)) + chip->ecc.write_page = write_page; + out: nand_release_device(mtd); - - *retlen = written; return ret; } @@ -2050,12 +1689,12 @@ out: * * Standard erase command for NAND chips */ -static void single_erase_cmd (struct mtd_info *mtd, int page) +static void single_erase_cmd(struct mtd_info *mtd, int page) { - struct nand_chip *this = mtd->priv; + struct nand_chip *chip = mtd->priv; /* Send commands to erase a block */ - this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page); - this->cmdfunc (mtd, NAND_CMD_ERASE2, -1, -1); + chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page); + chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1); } /** @@ -2066,15 +1705,15 @@ static void single_erase_cmd (struct mtd * AND multi block erase command function * Erase 4 consecutive blocks */ -static void multi_erase_cmd (struct mtd_info *mtd, int page) +static void multi_erase_cmd(struct mtd_info *mtd, int page) { - struct nand_chip *this = mtd->priv; + struct nand_chip *chip = mtd->priv; /* Send commands to erase a block */ - this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++); - this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++); - this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++); - this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page); - this->cmdfunc (mtd, NAND_CMD_ERASE2, -1, -1); + chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++); + chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++); + chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++); + chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page); + chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1); } /** @@ -2084,79 +1723,82 @@ static void multi_erase_cmd (struct mtd_ * * Erase one ore more blocks */ -static int nand_erase (struct mtd_info *mtd, struct erase_info *instr) +static int nand_erase(struct mtd_info *mtd, struct erase_info *instr) { - return nand_erase_nand (mtd, instr, 0); + return nand_erase_nand(mtd, instr, 0); } #define BBT_PAGE_MASK 0xffffff3f /** - * nand_erase_intern - [NAND Interface] erase block(s) + * nand_erase_nand - [Internal] erase block(s) * @mtd: MTD device structure * @instr: erase instruction * @allowbbt: allow erasing the bbt area * * Erase one ore more blocks */ -int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbbt) +int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, + int allowbbt) { int page, len, status, pages_per_block, ret, chipnr; - struct nand_chip *this = mtd->priv; - int rewrite_bbt[NAND_MAX_CHIPS]={0}; /* flags to indicate the page, if bbt needs to be rewritten. */ - unsigned int bbt_masked_page; /* bbt mask to compare to page being erased. */ - /* It is used to see if the current page is in the same */ - /* 256 block group and the same bank as the bbt. */ + struct nand_chip *chip = mtd->priv; + int rewrite_bbt[NAND_MAX_CHIPS]={0}; + unsigned int bbt_masked_page = 0xffffffff; - DEBUG (MTD_DEBUG_LEVEL3, - "nand_erase: start = 0x%08x, len = %i\n", (unsigned int) instr->addr, (unsigned int) instr->len); + DEBUG(MTD_DEBUG_LEVEL3, "nand_erase: start = 0x%08x, len = %i\n", + (unsigned int)instr->addr, (unsigned int)instr->len); /* Start address must align on block boundary */ - if (instr->addr & ((1 << this->phys_erase_shift) - 1)) { - DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n"); + if (instr->addr & ((1 << chip->phys_erase_shift) - 1)) { + DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n"); return -EINVAL; } /* Length must align on block boundary */ - if (instr->len & ((1 << this->phys_erase_shift) - 1)) { - DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Length not block aligned\n"); + if (instr->len & ((1 << chip->phys_erase_shift) - 1)) { + DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: " + "Length not block aligned\n"); return -EINVAL; } /* Do not allow erase past end of device */ if ((instr->len + instr->addr) > mtd->size) { - DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Erase past end of device\n"); + DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: " + "Erase past end of device\n"); return -EINVAL; } instr->fail_addr = 0xffffffff; /* Grab the lock and see if the device is available */ - nand_get_device (this, mtd, FL_ERASING); + nand_get_device(chip, mtd, FL_ERASING); /* Shift to get first page */ - page = (int) (instr->addr >> this->page_shift); - chipnr = (int) (instr->addr >> this->chip_shift); + page = (int)(instr->addr >> chip->page_shift); + chipnr = (int)(instr->addr >> chip->chip_shift); /* Calculate pages in each block */ - pages_per_block = 1 << (this->phys_erase_shift - this->page_shift); + pages_per_block = 1 << (chip->phys_erase_shift - chip->page_shift); /* Select the NAND device */ - this->select_chip(mtd, chipnr); + chip->select_chip(mtd, chipnr); - /* Check the WP bit */ /* Check, if it is write protected */ if (nand_check_wp(mtd)) { - DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Device is write protected!!!\n"); + DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: " + "Device is write protected!!!\n"); instr->state = MTD_ERASE_FAILED; goto erase_exit; } - /* if BBT requires refresh, set the BBT page mask to see if the BBT should be rewritten */ - if (this->options & BBT_AUTO_REFRESH) { - bbt_masked_page = this->bbt_td->pages[chipnr] & BBT_PAGE_MASK; - } else { - bbt_masked_page = 0xffffffff; /* should not match anything */ - } + /* + * If BBT requires refresh, set the BBT page mask to see if the BBT + * should be rewritten. Otherwise the mask is set to 0xffffffff which + * can not be matched. This is also done when the bbt is actually + * erased to avoid recusrsive updates + */ + if (chip->options & BBT_AUTO_REFRESH && !allowbbt) + bbt_masked_page = chip->bbt_td->pages[chipnr] & BBT_PAGE_MASK; /* Loop through the pages */ len = instr->len; @@ -2164,64 +1806,77 @@ int nand_erase_nand (struct mtd_info *mt instr->state = MTD_ERASING; while (len) { - /* Check if we have a bad block, we do not erase bad blocks ! */ - if (nand_block_checkbad(mtd, ((loff_t) page) << this->page_shift, 0, allowbbt)) { - printk (KERN_WARNING "nand_erase: attempt to erase a bad block at page 0x%08x\n", page); + /* + * heck if we have a bad block, we do not erase bad blocks ! + */ + if (nand_block_checkbad(mtd, ((loff_t) page) << + chip->page_shift, 0, allowbbt)) { + printk(KERN_WARNING "nand_erase: attempt to erase a " + "bad block at page 0x%08x\n", page); instr->state = MTD_ERASE_FAILED; goto erase_exit; } - /* Invalidate the page cache, if we erase the block which contains - the current cached page */ - if (page <= this->pagebuf && this->pagebuf < (page + pages_per_block)) - this->pagebuf = -1; - - this->erase_cmd (mtd, page & this->pagemask); - - status = this->waitfunc (mtd, this, FL_ERASING); - - /* See if operation failed and additional status checks are available */ - if ((status & NAND_STATUS_FAIL) && (this->errstat)) { - status = this->errstat(mtd, this, FL_ERASING, status, page); - } + /* + * Invalidate the page cache, if we erase the block which + * contains the current cached page + */ + if (page <= chip->pagebuf && chip->pagebuf < + (page + pages_per_block)) + chip->pagebuf = -1; + + chip->erase_cmd(mtd, page & chip->pagemask); + + status = chip->waitfunc(mtd, chip, FL_ERASING); + + /* + * See if operation failed and additional status checks are + * available + */ + if ((status & NAND_STATUS_FAIL) && (chip->errstat)) + status = chip->errstat(mtd, chip, FL_ERASING, + status, page); /* See if block erase succeeded */ if (status & NAND_STATUS_FAIL) { - DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: " "Failed erase, page 0x%08x\n", page); + DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: " + "Failed erase, page 0x%08x\n", page); instr->state = MTD_ERASE_FAILED; - instr->fail_addr = (page << this->page_shift); + instr->fail_addr = (page << chip->page_shift); goto erase_exit; } - /* if BBT requires refresh, set the BBT rewrite flag to the page being erased */ - if (this->options & BBT_AUTO_REFRESH) { - if (((page & BBT_PAGE_MASK) == bbt_masked_page) && - (page != this->bbt_td->pages[chipnr])) { - rewrite_bbt[chipnr] = (page << this->page_shift); - } - } + /* + * If BBT requires refresh, set the BBT rewrite flag to the + * page being erased + */ + if (bbt_masked_page != 0xffffffff && + (page & BBT_PAGE_MASK) == bbt_masked_page) + rewrite_bbt[chipnr] = (page << chip->page_shift); /* Increment page address and decrement length */ - len -= (1 << this->phys_erase_shift); + len -= (1 << chip->phys_erase_shift); page += pages_per_block; /* Check, if we cross a chip boundary */ - if (len && !(page & this->pagemask)) { + if (len && !(page & chip->pagemask)) { chipnr++; - this->select_chip(mtd, -1); - this->select_chip(mtd, chipnr); - - /* if BBT requires refresh and BBT-PERCHIP, - * set the BBT page mask to see if this BBT should be rewritten */ - if ((this->options & BBT_AUTO_REFRESH) && (this->bbt_td->options & NAND_BBT_PERCHIP)) { - bbt_masked_page = this->bbt_td->pages[chipnr] & BBT_PAGE_MASK; - } + chip->select_chip(mtd, -1); + chip->select_chip(mtd, chipnr); + /* + * If BBT requires refresh and BBT-PERCHIP, set the BBT + * page mask to see if this BBT should be rewritten + */ + if (bbt_masked_page != 0xffffffff && + (chip->bbt_td->options & NAND_BBT_PERCHIP)) + bbt_masked_page = chip->bbt_td->pages[chipnr] & + BBT_PAGE_MASK; } } instr->state = MTD_ERASE_DONE; -erase_exit: + erase_exit: ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO; /* Do call back function */ @@ -2231,16 +1886,21 @@ erase_exit: /* Deselect and wake up anyone waiting on the device */ nand_release_device(mtd); - /* if BBT requires refresh and erase was successful, rewrite any selected bad block tables */ - if ((this->options & BBT_AUTO_REFRESH) && (!ret)) { - for (chipnr = 0; chipnr < this->numchips; chipnr++) { - if (rewrite_bbt[chipnr]) { - /* update the BBT for chip */ - DEBUG (MTD_DEBUG_LEVEL0, "nand_erase_nand: nand_update_bbt (%d:0x%0x 0x%0x)\n", - chipnr, rewrite_bbt[chipnr], this->bbt_td->pages[chipnr]); - nand_update_bbt (mtd, rewrite_bbt[chipnr]); - } - } + /* + * If BBT requires refresh and erase was successful, rewrite any + * selected bad block tables + */ + if (bbt_masked_page == 0xffffffff || ret) + return ret; + + for (chipnr = 0; chipnr < chip->numchips; chipnr++) { + if (!rewrite_bbt[chipnr]) + continue; + /* update the BBT for chip */ + DEBUG(MTD_DEBUG_LEVEL0, "nand_erase_nand: nand_update_bbt " + "(%d:0x%0x 0x%0x)\n", chipnr, rewrite_bbt[chipnr], + chip->bbt_td->pages[chipnr]); + nand_update_bbt(mtd, rewrite_bbt[chipnr]); } /* Return more or less happy */ @@ -2253,51 +1913,50 @@ erase_exit: * * Sync is actually a wait for chip ready function */ -static void nand_sync (struct mtd_info *mtd) +static void nand_sync(struct mtd_info *mtd) { - struct nand_chip *this = mtd->priv; + struct nand_chip *chip = mtd->priv; - DEBUG (MTD_DEBUG_LEVEL3, "nand_sync: called\n"); + DEBUG(MTD_DEBUG_LEVEL3, "nand_sync: called\n"); /* Grab the lock and see if the device is available */ - nand_get_device (this, mtd, FL_SYNCING); + nand_get_device(chip, mtd, FL_SYNCING); /* Release it and go back */ - nand_release_device (mtd); + nand_release_device(mtd); } - /** - * nand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad + * nand_block_isbad - [MTD Interface] Check if block at offset is bad * @mtd: MTD device structure * @ofs: offset relative to mtd start */ -static int nand_block_isbad (struct mtd_info *mtd, loff_t ofs) +static int nand_block_isbad(struct mtd_info *mtd, loff_t offs) { /* Check for invalid offset */ - if (ofs > mtd->size) + if (offs > mtd->size) return -EINVAL; - return nand_block_checkbad (mtd, ofs, 1, 0); + return nand_block_checkbad(mtd, offs, 1, 0); } /** - * nand_block_markbad - [MTD Interface] Mark the block at the given offset as bad + * nand_block_markbad - [MTD Interface] Mark block at the given offset as bad * @mtd: MTD device structure * @ofs: offset relative to mtd start */ -static int nand_block_markbad (struct mtd_info *mtd, loff_t ofs) +static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs) { - struct nand_chip *this = mtd->priv; + struct nand_chip *chip = mtd->priv; int ret; - if ((ret = nand_block_isbad(mtd, ofs))) { - /* If it was bad already, return success and do nothing. */ + if ((ret = nand_block_isbad(mtd, ofs))) { + /* If it was bad already, return success and do nothing. */ if (ret > 0) return 0; - return ret; - } + return ret; + } - return this->block_markbad(mtd, ofs); + return chip->block_markbad(mtd, ofs); } /** @@ -2306,9 +1965,9 @@ static int nand_block_markbad (struct mt */ static int nand_suspend(struct mtd_info *mtd) { - struct nand_chip *this = mtd->priv; + struct nand_chip *chip = mtd->priv; - return nand_get_device (this, mtd, FL_PM_SUSPENDED); + return nand_get_device(chip, mtd, FL_PM_SUSPENDED); } /** @@ -2317,373 +1976,373 @@ static int nand_suspend(struct mtd_info */ static void nand_resume(struct mtd_info *mtd) { - struct nand_chip *this = mtd->priv; + struct nand_chip *chip = mtd->priv; - if (this->state == FL_PM_SUSPENDED) + if (chip->state == FL_PM_SUSPENDED) nand_release_device(mtd); else - printk(KERN_ERR "resume() called for the chip which is not " - "in suspended state\n"); - + printk(KERN_ERR "nand_resume() called for a chip which is not " + "in suspended state\n"); } - -/** - * nand_scan - [NAND Interface] Scan for the NAND device - * @mtd: MTD device structure - * @maxchips: Number of chips to scan for - * - * This fills out all the not initialized function pointers - * with the defaults. - * The flash ID is read and the mtd/chip structures are - * filled with the appropriate values. Buffers are allocated if - * they are not provided by the board driver - * +/* + * Set default functions */ -int nand_scan (struct mtd_info *mtd, int maxchips) +static void nand_set_defaults(struct nand_chip *chip, int busw) { - int i, nand_maf_id, nand_dev_id, busw, maf_id; - struct nand_chip *this = mtd->priv; - - /* Get buswidth to select the correct functions*/ - busw = this->options & NAND_BUSWIDTH_16; - /* check for proper chip_delay setup, set 20us if not */ - if (!this->chip_delay) - this->chip_delay = 20; + if (!chip->chip_delay) + chip->chip_delay = 20; /* check, if a user supplied command function given */ - if (this->cmdfunc == NULL) - this->cmdfunc = nand_command; + if (chip->cmdfunc == NULL) + chip->cmdfunc = nand_command; /* check, if a user supplied wait function given */ - if (this->waitfunc == NULL) - this->waitfunc = nand_wait; + if (chip->waitfunc == NULL) + chip->waitfunc = nand_wait; + + if (!chip->select_chip) + chip->select_chip = nand_select_chip; + if (!chip->read_byte) + chip->read_byte = busw ? nand_read_byte16 : nand_read_byte; + if (!chip->read_word) + chip->read_word = nand_read_word; + if (!chip->block_bad) + chip->block_bad = nand_block_bad; + if (!chip->block_markbad) + chip->block_markbad = nand_default_block_markbad; + if (!chip->write_buf) + chip->write_buf = busw ? nand_write_buf16 : nand_write_buf; + if (!chip->read_buf) + chip->read_buf = busw ? nand_read_buf16 : nand_read_buf; + if (!chip->verify_buf) + chip->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf; + if (!chip->scan_bbt) + chip->scan_bbt = nand_default_bbt; + + if (!chip->controller) { + chip->controller = &chip->hwcontrol; + spin_lock_init(&chip->controller->lock); + init_waitqueue_head(&chip->controller->wq); + } + +} - if (!this->select_chip) - this->select_chip = nand_select_chip; - if (!this->write_byte) - this->write_byte = busw ? nand_write_byte16 : nand_write_byte; - if (!this->read_byte) - this->read_byte = busw ? nand_read_byte16 : nand_read_byte; - if (!this->write_word) - this->write_word = nand_write_word; - if (!this->read_word) - this->read_word = nand_read_word; - if (!this->block_bad) - this->block_bad = nand_block_bad; - if (!this->block_markbad) - this->block_markbad = nand_default_block_markbad; - if (!this->write_buf) - this->write_buf = busw ? nand_write_buf16 : nand_write_buf; - if (!this->read_buf) - this->read_buf = busw ? nand_read_buf16 : nand_read_buf; - if (!this->verify_buf) - this->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf; - if (!this->scan_bbt) - this->scan_bbt = nand_default_bbt; +/* + * Get the flash and manufacturer id and lookup if the type is supported + */ +static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, + struct nand_chip *chip, + int busw, int *maf_id) +{ + struct nand_flash_dev *type = NULL; + int i, dev_id, maf_idx; /* Select the device */ - this->select_chip(mtd, 0); + chip->select_chip(mtd, 0); /* Send the command for reading device ID */ - this->cmdfunc (mtd, NAND_CMD_READID, 0x00, -1); + chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); /* Read manufacturer and device IDs */ - nand_maf_id = this->read_byte(mtd); - nand_dev_id = this->read_byte(mtd); + *maf_id = chip->read_byte(mtd); + dev_id = chip->read_byte(mtd); - /* Print and store flash device information */ + /* Lookup the flash id */ for (i = 0; nand_flash_ids[i].name != NULL; i++) { + if (dev_id == nand_flash_ids[i].id) { + type = &nand_flash_ids[i]; + break; + } + } - if (nand_dev_id != nand_flash_ids[i].id) - continue; - - if (!mtd->name) mtd->name = nand_flash_ids[i].name; - this->chipsize = nand_flash_ids[i].chipsize << 20; + if (!type) + return ERR_PTR(-ENODEV); - /* New devices have all the information in additional id bytes */ - if (!nand_flash_ids[i].pagesize) { - int extid; - /* The 3rd id byte contains non relevant data ATM */ - extid = this->read_byte(mtd); - /* The 4th id byte is the important one */ - extid = this->read_byte(mtd); - /* Calc pagesize */ - mtd->oobblock = 1024 << (extid & 0x3); - extid >>= 2; - /* Calc oobsize */ - mtd->oobsize = (8 << (extid & 0x01)) * (mtd->oobblock >> 9); - extid >>= 2; - /* Calc blocksize. Blocksize is multiples of 64KiB */ - mtd->erasesize = (64 * 1024) << (extid & 0x03); - extid >>= 2; - /* Get buswidth information */ - busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0; + if (!mtd->name) + mtd->name = type->name; - } else { - /* Old devices have this data hardcoded in the - * device id table */ - mtd->erasesize = nand_flash_ids[i].erasesize; - mtd->oobblock = nand_flash_ids[i].pagesize; - mtd->oobsize = mtd->oobblock / 32; - busw = nand_flash_ids[i].options & NAND_BUSWIDTH_16; - } + chip->chipsize = type->chipsize << 20; - /* Try to identify manufacturer */ - for (maf_id = 0; nand_manuf_ids[maf_id].id != 0x0; maf_id++) { - if (nand_manuf_ids[maf_id].id == nand_maf_id) - break; - } + /* Newer devices have all the information in additional id bytes */ + if (!type->pagesize) { + int extid; + /* The 3rd id byte contains non relevant data ATM */ + extid = chip->read_byte(mtd); + /* The 4th id byte is the important one */ + extid = chip->read_byte(mtd); + /* Calc pagesize */ + mtd->writesize = 1024 << (extid & 0x3); + extid >>= 2; + /* Calc oobsize */ + mtd->oobsize = (8 << (extid & 0x01)) * (mtd->writesize >> 9); + extid >>= 2; + /* Calc blocksize. Blocksize is multiples of 64KiB */ + mtd->erasesize = (64 * 1024) << (extid & 0x03); + extid >>= 2; + /* Get buswidth information */ + busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0; - /* Check, if buswidth is correct. Hardware drivers should set - * this correct ! */ - if (busw != (this->options & NAND_BUSWIDTH_16)) { - printk (KERN_INFO "NAND device: Manufacturer ID:" - " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id, - nand_manuf_ids[maf_id].name , mtd->name); - printk (KERN_WARNING - "NAND bus width %d instead %d bit\n", - (this->options & NAND_BUSWIDTH_16) ? 16 : 8, - busw ? 16 : 8); - this->select_chip(mtd, -1); - return 1; - } - - /* Calculate the address shift from the page size */ - this->page_shift = ffs(mtd->oobblock) - 1; - this->bbt_erase_shift = this->phys_erase_shift = ffs(mtd->erasesize) - 1; - this->chip_shift = ffs(this->chipsize) - 1; - - /* Set the bad block position */ - this->badblockpos = mtd->oobblock > 512 ? - NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS; - - /* Get chip options, preserve non chip based options */ - this->options &= ~NAND_CHIPOPTIONS_MSK; - this->options |= nand_flash_ids[i].options & NAND_CHIPOPTIONS_MSK; - /* Set this as a default. Board drivers can override it, if neccecary */ - this->options |= NAND_NO_AUTOINCR; - /* Check if this is a not a samsung device. Do not clear the options - * for chips which are not having an extended id. + } else { + /* + * Old devices have chip data hardcoded in the device id table */ - if (nand_maf_id != NAND_MFR_SAMSUNG && !nand_flash_ids[i].pagesize) - this->options &= ~NAND_SAMSUNG_LP_OPTIONS; - - /* Check for AND chips with 4 page planes */ - if (this->options & NAND_4PAGE_ARRAY) - this->erase_cmd = multi_erase_cmd; - else - this->erase_cmd = single_erase_cmd; + mtd->erasesize = type->erasesize; + mtd->writesize = type->pagesize; + mtd->oobsize = mtd->writesize / 32; + busw = type->options & NAND_BUSWIDTH_16; + } - /* Do not replace user supplied command function ! */ - if (mtd->oobblock > 512 && this->cmdfunc == nand_command) - this->cmdfunc = nand_command_lp; - - printk (KERN_INFO "NAND device: Manufacturer ID:" - " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id, - nand_manuf_ids[maf_id].name , nand_flash_ids[i].name); - break; + /* Try to identify manufacturer */ + for (maf_idx = 0; nand_manuf_ids[maf_idx].id != 0x0; maf_id++) { + if (nand_manuf_ids[maf_idx].id == *maf_id) + break; } - if (!nand_flash_ids[i].name) { - printk (KERN_WARNING "No NAND device found!!!\n"); - this->select_chip(mtd, -1); - return 1; + /* + * Check, if buswidth is correct. Hardware drivers should set + * chip correct ! + */ + if (busw != (chip->options & NAND_BUSWIDTH_16)) { + printk(KERN_INFO "NAND device: Manufacturer ID:" + " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, + dev_id, nand_manuf_ids[maf_idx].name, mtd->name); + printk(KERN_WARNING "NAND bus width %d instead %d bit\n", + (chip->options & NAND_BUSWIDTH_16) ? 16 : 8, + busw ? 16 : 8); + return ERR_PTR(-EINVAL); } - for (i=1; i < maxchips; i++) { - this->select_chip(mtd, i); + /* Calculate the address shift from the page size */ + chip->page_shift = ffs(mtd->writesize) - 1; + /* Convert chipsize to number of pages per chip -1. */ + chip->pagemask = (chip->chipsize >> chip->page_shift) - 1; - /* Send the command for reading device ID */ - this->cmdfunc (mtd, NAND_CMD_READID, 0x00, -1); + chip->bbt_erase_shift = chip->phys_erase_shift = + ffs(mtd->erasesize) - 1; + chip->chip_shift = ffs(chip->chipsize) - 1; + + /* Set the bad block position */ + chip->badblockpos = mtd->writesize > 512 ? + NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS; + + /* Get chip options, preserve non chip based options */ + chip->options &= ~NAND_CHIPOPTIONS_MSK; + chip->options |= type->options & NAND_CHIPOPTIONS_MSK; + + /* + * Set chip as a default. Board drivers can override it, if necessary + */ + chip->options |= NAND_NO_AUTOINCR; + + /* Check if chip is a not a samsung device. Do not clear the + * options for chips which are not having an extended id. + */ + if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize) + chip->options &= ~NAND_SAMSUNG_LP_OPTIONS; + + /* Check for AND chips with 4 page planes */ + if (chip->options & NAND_4PAGE_ARRAY) + chip->erase_cmd = multi_erase_cmd; + else + chip->erase_cmd = single_erase_cmd; + + /* Do not replace user supplied command function ! */ + if (mtd->writesize > 512 && chip->cmdfunc == nand_command) + chip->cmdfunc = nand_command_lp; + + printk(KERN_INFO "NAND device: Manufacturer ID:" + " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, dev_id, + nand_manuf_ids[maf_idx].name, type->name); + + return type; +} + +/* module_text_address() isn't exported, and it's mostly a pointless + test if this is a module _anyway_ -- they'd have to try _really_ hard + to call us from in-kernel code if the core NAND support is modular. */ +#ifdef MODULE +#define caller_is_module() (1) +#else +#define caller_is_module() \ + module_text_address((unsigned long)__builtin_return_address(0)) +#endif + +/** + * nand_scan - [NAND Interface] Scan for the NAND device + * @mtd: MTD device structure + * @maxchips: Number of chips to scan for + * + * This fills out all the uninitialized function pointers + * with the defaults. + * The flash ID is read and the mtd/chip structures are + * filled with the appropriate values. + * The mtd->owner field must be set to the module of the caller + * + */ +int nand_scan(struct mtd_info *mtd, int maxchips) +{ + int i, busw, nand_maf_id; + struct nand_chip *chip = mtd->priv; + struct nand_flash_dev *type; + /* Many callers got this wrong, so check for it for a while... */ + if (!mtd->owner && caller_is_module()) { + printk(KERN_CRIT "nand_scan() called with NULL mtd->owner!\n"); + BUG(); + } + + /* Get buswidth to select the correct functions */ + busw = chip->options & NAND_BUSWIDTH_16; + /* Set the default functions */ + nand_set_defaults(chip, busw); + + /* Read the flash type */ + type = nand_get_flash_type(mtd, chip, busw, &nand_maf_id); + + if (IS_ERR(type)) { + printk(KERN_WARNING "No NAND device found!!!\n"); + chip->select_chip(mtd, -1); + return PTR_ERR(type); + } + + /* Check for a chip array */ + for (i = 1; i < maxchips; i++) { + chip->select_chip(mtd, i); + /* Send the command for reading device ID */ + chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); /* Read manufacturer and device IDs */ - if (nand_maf_id != this->read_byte(mtd) || - nand_dev_id != this->read_byte(mtd)) + if (nand_maf_id != chip->read_byte(mtd) || + type->id != chip->read_byte(mtd)) break; } if (i > 1) printk(KERN_INFO "%d NAND chips detected\n", i); - /* Allocate buffers, if neccecary */ - if (!this->oob_buf) { - size_t len; - len = mtd->oobsize << (this->phys_erase_shift - this->page_shift); - this->oob_buf = kmalloc (len, GFP_KERNEL); - if (!this->oob_buf) { - printk (KERN_ERR "nand_scan(): Cannot allocate oob_buf\n"); - return -ENOMEM; - } - this->options |= NAND_OOBBUF_ALLOC; - } - - if (!this->data_buf) { - size_t len; - len = mtd->oobblock + mtd->oobsize; - this->data_buf = kmalloc (len, GFP_KERNEL); - if (!this->data_buf) { - if (this->options & NAND_OOBBUF_ALLOC) - kfree (this->oob_buf); - printk (KERN_ERR "nand_scan(): Cannot allocate data_buf\n"); - return -ENOMEM; - } - this->options |= NAND_DATABUF_ALLOC; - } - /* Store the number of chips and calc total size for mtd */ - this->numchips = i; - mtd->size = i * this->chipsize; - /* Convert chipsize to number of pages per chip -1. */ - this->pagemask = (this->chipsize >> this->page_shift) - 1; - /* Preset the internal oob buffer */ - memset(this->oob_buf, 0xff, mtd->oobsize << (this->phys_erase_shift - this->page_shift)); - - /* If no default placement scheme is given, select an - * appropriate one */ - if (!this->autooob) { - /* Select the appropriate default oob placement scheme for - * placement agnostic filesystems */ + chip->numchips = i; + mtd->size = i * chip->chipsize; + + /* Preset the internal oob write buffer */ + memset(chip->buffers.oobwbuf, 0xff, mtd->oobsize); + + /* + * If no default placement scheme is given, select an appropriate one + */ + if (!chip->ecc.layout) { switch (mtd->oobsize) { case 8: - this->autooob = &nand_oob_8; + chip->ecc.layout = &nand_oob_8; break; case 16: - this->autooob = &nand_oob_16; + chip->ecc.layout = &nand_oob_16; break; case 64: - this->autooob = &nand_oob_64; + chip->ecc.layout = &nand_oob_64; break; default: - printk (KERN_WARNING "No oob scheme defined for oobsize %d\n", - mtd->oobsize); + printk(KERN_WARNING "No oob scheme defined for " + "oobsize %d\n", mtd->oobsize); BUG(); } } - /* The number of bytes available for the filesystem to place fs dependend - * oob data */ - mtd->oobavail = 0; - for (i = 0; this->autooob->oobfree[i][1]; i++) - mtd->oobavail += this->autooob->oobfree[i][1]; - /* - * check ECC mode, default to software - * if 3byte/512byte hardware ECC is selected and we have 256 byte pagesize - * fallback to software ECC - */ - this->eccsize = 256; /* set default eccsize */ - this->eccbytes = 3; - - switch (this->eccmode) { - case NAND_ECC_HW12_2048: - if (mtd->oobblock < 2048) { - printk(KERN_WARNING "2048 byte HW ECC not possible on %d byte page size, fallback to SW ECC\n", - mtd->oobblock); - this->eccmode = NAND_ECC_SOFT; - this->calculate_ecc = nand_calculate_ecc; - this->correct_data = nand_correct_data; - } else - this->eccsize = 2048; - break; + * check ECC mode, default to software if 3byte/512byte hardware ECC is + * selected and we have 256 byte pagesize fallback to software ECC + */ + switch (chip->ecc.mode) { + case NAND_ECC_HW: + /* Use standard hwecc read page function ? */ + if (!chip->ecc.read_page) + chip->ecc.read_page = nand_read_page_hwecc; + if (!chip->ecc.write_page) + chip->ecc.write_page = nand_write_page_hwecc; + + case NAND_ECC_HW_SYNDROME: + if (!chip->ecc.calculate || !chip->ecc.correct || + !chip->ecc.hwctl) { + printk(KERN_WARNING "No ECC functions supplied, " + "Hardware ECC not possible\n"); + BUG(); + } + /* Use standard syndrome read/write page function ? */ + if (!chip->ecc.read_page) + chip->ecc.read_page = nand_read_page_syndrome; + if (!chip->ecc.write_page) + chip->ecc.write_page = nand_write_page_syndrome; - case NAND_ECC_HW3_512: - case NAND_ECC_HW6_512: - case NAND_ECC_HW8_512: - if (mtd->oobblock == 256) { - printk (KERN_WARNING "512 byte HW ECC not possible on 256 Byte pagesize, fallback to SW ECC \n"); - this->eccmode = NAND_ECC_SOFT; - this->calculate_ecc = nand_calculate_ecc; - this->correct_data = nand_correct_data; - } else - this->eccsize = 512; /* set eccsize to 512 */ - break; + if (mtd->writesize >= chip->ecc.size) + break; + printk(KERN_WARNING "%d byte HW ECC not possible on " + "%d byte page size, fallback to SW ECC\n", + chip->ecc.size, mtd->writesize); + chip->ecc.mode = NAND_ECC_SOFT; - case NAND_ECC_HW3_256: + case NAND_ECC_SOFT: + chip->ecc.calculate = nand_calculate_ecc; + chip->ecc.correct = nand_correct_data; + chip->ecc.read_page = nand_read_page_swecc; + chip->ecc.write_page = nand_write_page_swecc; + chip->ecc.size = 256; + chip->ecc.bytes = 3; break; case NAND_ECC_NONE: - printk (KERN_WARNING "NAND_ECC_NONE selected by board driver. This is not recommended !!\n"); - this->eccmode = NAND_ECC_NONE; - break; - - case NAND_ECC_SOFT: - this->calculate_ecc = nand_calculate_ecc; - this->correct_data = nand_correct_data; + printk(KERN_WARNING "NAND_ECC_NONE selected by board driver. " + "This is not recommended !!\n"); + chip->ecc.read_page = nand_read_page_raw; + chip->ecc.write_page = nand_write_page_raw; + chip->ecc.size = mtd->writesize; + chip->ecc.bytes = 0; break; - default: - printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode); + printk(KERN_WARNING "Invalid NAND_ECC_MODE %d\n", + chip->ecc.mode); BUG(); } - /* Check hardware ecc function availability and adjust number of ecc bytes per - * calculation step - */ - switch (this->eccmode) { - case NAND_ECC_HW12_2048: - this->eccbytes += 4; - case NAND_ECC_HW8_512: - this->eccbytes += 2; - case NAND_ECC_HW6_512: - this->eccbytes += 3; - case NAND_ECC_HW3_512: - case NAND_ECC_HW3_256: - if (this->calculate_ecc && this->correct_data && this->enable_hwecc) - break; - printk (KERN_WARNING "No ECC functions supplied, Hardware ECC not possible\n"); - BUG(); - } - - mtd->eccsize = this->eccsize; - - /* Set the number of read / write steps for one page to ensure ECC generation */ - switch (this->eccmode) { - case NAND_ECC_HW12_2048: - this->eccsteps = mtd->oobblock / 2048; - break; - case NAND_ECC_HW3_512: - case NAND_ECC_HW6_512: - case NAND_ECC_HW8_512: - this->eccsteps = mtd->oobblock / 512; - break; - case NAND_ECC_HW3_256: - case NAND_ECC_SOFT: - this->eccsteps = mtd->oobblock / 256; - break; + /* + * The number of bytes available for a client to place data into + * the out of band area + */ + chip->ecc.layout->oobavail = 0; + for (i = 0; chip->ecc.layout->oobfree[i].length; i++) + chip->ecc.layout->oobavail += + chip->ecc.layout->oobfree[i].length; - case NAND_ECC_NONE: - this->eccsteps = 1; - break; + /* + * Set the number of read / write steps for one page depending on ECC + * mode + */ + chip->ecc.steps = mtd->writesize / chip->ecc.size; + if(chip->ecc.steps * chip->ecc.size != mtd->writesize) { + printk(KERN_WARNING "Invalid ecc parameters\n"); + BUG(); } + chip->ecc.total = chip->ecc.steps * chip->ecc.bytes; - /* Initialize state, waitqueue and spinlock */ - this->state = FL_READY; - init_waitqueue_head (&this->wq); - spin_lock_init (&this->chip_lock); + /* Initialize state */ + chip->state = FL_READY; /* De-select the device */ - this->select_chip(mtd, -1); + chip->select_chip(mtd, -1); /* Invalidate the pagebuffer reference */ - this->pagebuf = -1; + chip->pagebuf = -1; /* Fill in remaining MTD driver data */ mtd->type = MTD_NANDFLASH; - mtd->flags = MTD_CAP_NANDFLASH | MTD_ECC; + mtd->flags = MTD_CAP_NANDFLASH; mtd->ecctype = MTD_ECC_SW; mtd->erase = nand_erase; mtd->point = NULL; mtd->unpoint = NULL; mtd->read = nand_read; mtd->write = nand_write; - mtd->read_ecc = nand_read_ecc; - mtd->write_ecc = nand_write_ecc; mtd->read_oob = nand_read_oob; mtd->write_oob = nand_write_oob; - mtd->readv = NULL; - mtd->writev = nand_writev; - mtd->writev_ecc = nand_writev_ecc; mtd->sync = nand_sync; mtd->lock = NULL; mtd->unlock = NULL; @@ -2692,47 +2351,38 @@ int nand_scan (struct mtd_info *mtd, int mtd->block_isbad = nand_block_isbad; mtd->block_markbad = nand_block_markbad; - /* and make the autooob the default one */ - memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo)); - - mtd->owner = THIS_MODULE; + /* propagate ecc.layout to mtd_info */ + mtd->ecclayout = chip->ecc.layout; /* Check, if we should skip the bad block table scan */ - if (this->options & NAND_SKIP_BBTSCAN) + if (chip->options & NAND_SKIP_BBTSCAN) return 0; /* Build bad block table */ - return this->scan_bbt (mtd); + return chip->scan_bbt(mtd); } /** * nand_release - [NAND Interface] Free resources held by the NAND device * @mtd: MTD device structure */ -void nand_release (struct mtd_info *mtd) +void nand_release(struct mtd_info *mtd) { - struct nand_chip *this = mtd->priv; + struct nand_chip *chip = mtd->priv; #ifdef CONFIG_MTD_PARTITIONS /* Deregister partitions */ - del_mtd_partitions (mtd); + del_mtd_partitions(mtd); #endif /* Deregister the device */ - del_mtd_device (mtd); + del_mtd_device(mtd); /* Free bad block table memory */ - kfree (this->bbt); - /* Buffer allocated by nand_scan ? */ - if (this->options & NAND_OOBBUF_ALLOC) - kfree (this->oob_buf); - /* Buffer allocated by nand_scan ? */ - if (this->options & NAND_DATABUF_ALLOC) - kfree (this->data_buf); + kfree(chip->bbt); } -EXPORT_SYMBOL_GPL (nand_scan); -EXPORT_SYMBOL_GPL (nand_release); - +EXPORT_SYMBOL_GPL(nand_scan); +EXPORT_SYMBOL_GPL(nand_release); static int __init nand_base_init(void) { @@ -2748,6 +2398,6 @@ static void __exit nand_base_exit(void) module_init(nand_base_init); module_exit(nand_base_exit); -MODULE_LICENSE ("GPL"); -MODULE_AUTHOR ("Steven J. Hill , Thomas Gleixner "); -MODULE_DESCRIPTION ("Generic NAND flash driver code"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Steven J. Hill , Thomas Gleixner "); +MODULE_DESCRIPTION("Generic NAND flash driver code"); diff -puN drivers/mtd/nand/nand_bbt.c~git-mtd drivers/mtd/nand/nand_bbt.c --- devel/drivers/mtd/nand/nand_bbt.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/nand/nand_bbt.c 2006-05-29 15:02:34.000000000 -0700 @@ -48,7 +48,7 @@ * * Following assumptions are made: * - bbts start at a page boundary, if autolocated on a block boundary - * - the space neccecary for a bbt in FLASH does not exceed a block boundary + * - the space necessary for a bbt in FLASH does not exceed a block boundary * */ @@ -60,7 +60,7 @@ #include #include #include - +#include /** * check_pattern - [GENERIC] check if a pattern is in the buffer @@ -75,7 +75,7 @@ * pattern area contain 0xff * */ -static int check_pattern (uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td) +static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td) { int i, end = 0; uint8_t *p = buf; @@ -116,7 +116,7 @@ static int check_pattern (uint8_t *buf, * no optional empty check * */ -static int check_short_pattern (uint8_t *buf, struct nand_bbt_descr *td) +static int check_short_pattern(uint8_t *buf, struct nand_bbt_descr *td) { int i; uint8_t *p = buf; @@ -142,8 +142,8 @@ static int check_short_pattern (uint8_t * Read the bad block table starting from page. * */ -static int read_bbt (struct mtd_info *mtd, uint8_t *buf, int page, int num, - int bits, int offs, int reserved_block_code) +static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num, + int bits, int offs, int reserved_block_code) { int res, i, j, act = 0; struct nand_chip *this = mtd->priv; @@ -152,17 +152,17 @@ static int read_bbt (struct mtd_info *mt uint8_t msk = (uint8_t) ((1 << bits) - 1); totlen = (num * bits) >> 3; - from = ((loff_t)page) << this->page_shift; + from = ((loff_t) page) << this->page_shift; while (totlen) { - len = min (totlen, (size_t) (1 << this->bbt_erase_shift)); - res = mtd->read_ecc (mtd, from, len, &retlen, buf, NULL, this->autooob); + len = min(totlen, (size_t) (1 << this->bbt_erase_shift)); + res = mtd->read(mtd, from, len, &retlen, buf); if (res < 0) { if (retlen != len) { - printk (KERN_INFO "nand_bbt: Error reading bad block table\n"); + printk(KERN_INFO "nand_bbt: Error reading bad block table\n"); return res; } - printk (KERN_WARNING "nand_bbt: ECC error while reading bad block table\n"); + printk(KERN_WARNING "nand_bbt: ECC error while reading bad block table\n"); } /* Analyse data */ @@ -172,17 +172,16 @@ static int read_bbt (struct mtd_info *mt uint8_t tmp = (dat >> j) & msk; if (tmp == msk) continue; - if (reserved_block_code && - (tmp == reserved_block_code)) { - printk (KERN_DEBUG "nand_read_bbt: Reserved block at 0x%08x\n", - ((offs << 2) + (act >> 1)) << this->bbt_erase_shift); + if (reserved_block_code && (tmp == reserved_block_code)) { + printk(KERN_DEBUG "nand_read_bbt: Reserved block at 0x%08x\n", + ((offs << 2) + (act >> 1)) << this->bbt_erase_shift); this->bbt[offs + (act >> 3)] |= 0x2 << (act & 0x06); continue; } /* Leave it for now, if its matured we can move this * message to MTD_DEBUG_LEVEL0 */ - printk (KERN_DEBUG "nand_read_bbt: Bad block at 0x%08x\n", - ((offs << 2) + (act >> 1)) << this->bbt_erase_shift); + printk(KERN_DEBUG "nand_read_bbt: Bad block at 0x%08x\n", + ((offs << 2) + (act >> 1)) << this->bbt_erase_shift); /* Factory marked bad or worn out ? */ if (tmp == 0) this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06); @@ -207,7 +206,7 @@ static int read_bbt (struct mtd_info *mt * Read the bad block table for all chips starting at a given page * We assume that the bbt bits are in consecutive order. */ -static int read_abs_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip) +static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip) { struct nand_chip *this = mtd->priv; int res = 0, i; @@ -231,6 +230,42 @@ static int read_abs_bbt (struct mtd_info return 0; } +/* + * Scan read raw data from flash + */ +static int scan_read_raw(struct mtd_info *mtd, uint8_t *buf, loff_t offs, + size_t len) +{ + struct mtd_oob_ops ops; + + ops.mode = MTD_OOB_RAW; + ops.ooboffs = 0; + ops.ooblen = mtd->oobsize; + ops.oobbuf = buf; + ops.datbuf = buf; + ops.len = len; + + return mtd->read_oob(mtd, offs, &ops); +} + +/* + * Scan write data with oob to flash + */ +static int scan_write_bbt(struct mtd_info *mtd, loff_t offs, size_t len, + uint8_t *buf, uint8_t *oob) +{ + struct mtd_oob_ops ops; + + ops.mode = MTD_OOB_PLACE; + ops.ooboffs = 0; + ops.ooblen = mtd->oobsize; + ops.datbuf = buf; + ops.oobbuf = oob; + ops.len = len; + + return mtd->write_oob(mtd, offs, &ops); +} + /** * read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page * @mtd: MTD device structure @@ -242,28 +277,85 @@ static int read_abs_bbt (struct mtd_info * We assume that the bbt bits are in consecutive order. * */ -static int read_abs_bbts (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, - struct nand_bbt_descr *md) +static int read_abs_bbts(struct mtd_info *mtd, uint8_t *buf, + struct nand_bbt_descr *td, struct nand_bbt_descr *md) { struct nand_chip *this = mtd->priv; /* Read the primary version, if available */ if (td->options & NAND_BBT_VERSION) { - nand_read_raw (mtd, buf, td->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize); - td->version[0] = buf[mtd->oobblock + td->veroffs]; - printk (KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", td->pages[0], td->version[0]); + scan_read_raw(mtd, buf, td->pages[0] << this->page_shift, + mtd->writesize); + td->version[0] = buf[mtd->writesize + td->veroffs]; + printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", + td->pages[0], td->version[0]); } /* Read the mirror version, if available */ if (md && (md->options & NAND_BBT_VERSION)) { - nand_read_raw (mtd, buf, md->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize); - md->version[0] = buf[mtd->oobblock + md->veroffs]; - printk (KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", md->pages[0], md->version[0]); + scan_read_raw(mtd, buf, md->pages[0] << this->page_shift, + mtd->writesize); + md->version[0] = buf[mtd->writesize + md->veroffs]; + printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", + md->pages[0], md->version[0]); } - return 1; } +/* + * Scan a given block full + */ +static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd, + loff_t offs, uint8_t *buf, size_t readlen, + int scanlen, int len) +{ + int ret, j; + + ret = scan_read_raw(mtd, buf, offs, readlen); + if (ret) + return ret; + + for (j = 0; j < len; j++, buf += scanlen) { + if (check_pattern(buf, scanlen, mtd->writesize, bd)) + return 1; + } + return 0; +} + +/* + * Scan a given block partially + */ +static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd, + loff_t offs, uint8_t *buf, int len) +{ + struct mtd_oob_ops ops; + int j, ret; + + ops.len = mtd->oobsize; + ops.ooblen = mtd->oobsize; + ops.oobbuf = buf; + ops.ooboffs = 0; + ops.datbuf = NULL; + ops.mode = MTD_OOB_PLACE; + + for (j = 0; j < len; j++) { + /* + * Read the full oob until read_oob is fixed to + * handle single byte reads for 16 bit + * buswidth + */ + ret = mtd->read_oob(mtd, offs, &ops); + if (ret) + return ret; + + if (check_short_pattern(buf, bd)) + return 1; + + offs += mtd->writesize; + } + return 0; +} + /** * create_bbt - [GENERIC] Create a bad block table by scanning the device * @mtd: MTD device structure @@ -275,15 +367,16 @@ static int read_abs_bbts (struct mtd_inf * Create a bad block table by scanning the device * for the given good/bad block identify pattern */ -static int create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd, int chip) +static int create_bbt(struct mtd_info *mtd, uint8_t *buf, + struct nand_bbt_descr *bd, int chip) { struct nand_chip *this = mtd->priv; - int i, j, numblocks, len, scanlen; + int i, numblocks, len, scanlen; int startblock; loff_t from; - size_t readlen, ooblen; + size_t readlen; - printk (KERN_INFO "Scanning device for bad blocks\n"); + printk(KERN_INFO "Scanning device for bad blocks\n"); if (bd->options & NAND_BBT_SCANALLPAGES) len = 1 << (this->bbt_erase_shift - this->page_shift); @@ -296,25 +389,24 @@ static int create_bbt (struct mtd_info * if (!(bd->options & NAND_BBT_SCANEMPTY)) { /* We need only read few bytes from the OOB area */ - scanlen = ooblen = 0; + scanlen = 0; readlen = bd->len; } else { /* Full page content should be read */ - scanlen = mtd->oobblock + mtd->oobsize; - readlen = len * mtd->oobblock; - ooblen = len * mtd->oobsize; + scanlen = mtd->writesize + mtd->oobsize; + readlen = len * mtd->writesize; } if (chip == -1) { - /* Note that numblocks is 2 * (real numblocks) here, see i+=2 below as it - * makes shifting and masking less painful */ + /* Note that numblocks is 2 * (real numblocks) here, see i+=2 + * below as it makes shifting and masking less painful */ numblocks = mtd->size >> (this->bbt_erase_shift - 1); startblock = 0; from = 0; } else { if (chip >= this->numchips) { - printk (KERN_WARNING "create_bbt(): chipnr (%d) > available chips (%d)\n", - chip + 1, this->numchips); + printk(KERN_WARNING "create_bbt(): chipnr (%d) > available chips (%d)\n", + chip + 1, this->numchips); return -EINVAL; } numblocks = this->chipsize >> (this->bbt_erase_shift - 1); @@ -326,36 +418,21 @@ static int create_bbt (struct mtd_info * for (i = startblock; i < numblocks;) { int ret; - if (bd->options & NAND_BBT_SCANEMPTY) - if ((ret = nand_read_raw (mtd, buf, from, readlen, ooblen))) - return ret; - - for (j = 0; j < len; j++) { - if (!(bd->options & NAND_BBT_SCANEMPTY)) { - size_t retlen; - - /* Read the full oob until read_oob is fixed to - * handle single byte reads for 16 bit buswidth */ - ret = mtd->read_oob(mtd, from + j * mtd->oobblock, - mtd->oobsize, &retlen, buf); - if (ret) - return ret; - - if (check_short_pattern (buf, bd)) { - this->bbt[i >> 3] |= 0x03 << (i & 0x6); - printk (KERN_WARNING "Bad eraseblock %d at 0x%08x\n", - i >> 1, (unsigned int) from); - break; - } - } else { - if (check_pattern (&buf[j * scanlen], scanlen, mtd->oobblock, bd)) { - this->bbt[i >> 3] |= 0x03 << (i & 0x6); - printk (KERN_WARNING "Bad eraseblock %d at 0x%08x\n", - i >> 1, (unsigned int) from); - break; - } - } + if (bd->options & NAND_BBT_SCANALLPAGES) + ret = scan_block_full(mtd, bd, from, buf, readlen, + scanlen, len); + else + ret = scan_block_fast(mtd, bd, from, buf, len); + + if (ret < 0) + return ret; + + if (ret) { + this->bbt[i >> 3] |= 0x03 << (i & 0x6); + printk(KERN_WARNING "Bad eraseblock %d at 0x%08x\n", + i >> 1, (unsigned int)from); } + i += 2; from += (1 << this->bbt_erase_shift); } @@ -374,22 +451,23 @@ static int create_bbt (struct mtd_info * * block. * If the option NAND_BBT_PERCHIP is given, each chip is searched * for a bbt, which contains the bad block information of this chip. - * This is neccecary to provide support for certain DOC devices. + * This is necessary to provide support for certain DOC devices. * * The bbt ident pattern resides in the oob area of the first page * in a block. */ -static int search_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td) +static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td) { struct nand_chip *this = mtd->priv; int i, chips; int bits, startblock, block, dir; - int scanlen = mtd->oobblock + mtd->oobsize; + int scanlen = mtd->writesize + mtd->oobsize; int bbtblocks; + int blocktopage = this->bbt_erase_shift - this->page_shift; /* Search direction top -> down ? */ if (td->options & NAND_BBT_LASTBLOCK) { - startblock = (mtd->size >> this->bbt_erase_shift) -1; + startblock = (mtd->size >> this->bbt_erase_shift) - 1; dir = -1; } else { startblock = 0; @@ -415,13 +493,16 @@ static int search_bbt (struct mtd_info * td->pages[i] = -1; /* Scan the maximum number of blocks */ for (block = 0; block < td->maxblocks; block++) { + int actblock = startblock + dir * block; + loff_t offs = actblock << this->bbt_erase_shift; + /* Read first page */ - nand_read_raw (mtd, buf, actblock << this->bbt_erase_shift, mtd->oobblock, mtd->oobsize); - if (!check_pattern(buf, scanlen, mtd->oobblock, td)) { - td->pages[i] = actblock << (this->bbt_erase_shift - this->page_shift); + scan_read_raw(mtd, buf, offs, mtd->writesize); + if (!check_pattern(buf, scanlen, mtd->writesize, td)) { + td->pages[i] = actblock << blocktopage; if (td->options & NAND_BBT_VERSION) { - td->version[i] = buf[mtd->oobblock + td->veroffs]; + td->version[i] = buf[mtd->writesize + td->veroffs]; } break; } @@ -431,9 +512,10 @@ static int search_bbt (struct mtd_info * /* Check, if we found a bbt for each requested chip */ for (i = 0; i < chips; i++) { if (td->pages[i] == -1) - printk (KERN_WARNING "Bad block table not found for chip %d\n", i); + printk(KERN_WARNING "Bad block table not found for chip %d\n", i); else - printk (KERN_DEBUG "Bad block table found at page %d, version 0x%02X\n", td->pages[i], td->version[i]); + printk(KERN_DEBUG "Bad block table found at page %d, version 0x%02X\n", td->pages[i], + td->version[i]); } return 0; } @@ -447,21 +529,19 @@ static int search_bbt (struct mtd_info * * * Search and read the bad block table(s) */ -static int search_read_bbts (struct mtd_info *mtd, uint8_t *buf, - struct nand_bbt_descr *td, struct nand_bbt_descr *md) +static int search_read_bbts(struct mtd_info *mtd, uint8_t * buf, struct nand_bbt_descr *td, struct nand_bbt_descr *md) { /* Search the primary table */ - search_bbt (mtd, buf, td); + search_bbt(mtd, buf, td); /* Search the mirror table */ if (md) - search_bbt (mtd, buf, md); + search_bbt(mtd, buf, md); /* Force result check */ return 1; } - /** * write_bbt - [GENERIC] (Re)write the bad block table * @@ -474,25 +554,31 @@ static int search_read_bbts (struct mtd_ * (Re)write the bad block table * */ -static int write_bbt (struct mtd_info *mtd, uint8_t *buf, - struct nand_bbt_descr *td, struct nand_bbt_descr *md, int chipsel) +static int write_bbt(struct mtd_info *mtd, uint8_t *buf, + struct nand_bbt_descr *td, struct nand_bbt_descr *md, + int chipsel) { struct nand_chip *this = mtd->priv; - struct nand_oobinfo oobinfo; struct erase_info einfo; int i, j, res, chip = 0; int bits, startblock, dir, page, offs, numblocks, sft, sftmsk; - int nrchips, bbtoffs, pageoffs; + int nrchips, bbtoffs, pageoffs, ooboffs; uint8_t msk[4]; uint8_t rcode = td->reserved_block_code; size_t retlen, len = 0; loff_t to; + struct mtd_oob_ops ops; + + ops.ooblen = mtd->oobsize; + ops.ooboffs = 0; + ops.datbuf = NULL; + ops.mode = MTD_OOB_PLACE; if (!rcode) rcode = 0xff; /* Write bad block table per chip rather than per device ? */ if (td->options & NAND_BBT_PERCHIP) { - numblocks = (int) (this->chipsize >> this->bbt_erase_shift); + numblocks = (int)(this->chipsize >> this->bbt_erase_shift); /* Full device write or specific chip ? */ if (chipsel == -1) { nrchips = this->numchips; @@ -501,7 +587,7 @@ static int write_bbt (struct mtd_info *m chip = chipsel; } } else { - numblocks = (int) (mtd->size >> this->bbt_erase_shift); + numblocks = (int)(mtd->size >> this->bbt_erase_shift); nrchips = 1; } @@ -530,27 +616,38 @@ static int write_bbt (struct mtd_info *m for (i = 0; i < td->maxblocks; i++) { int block = startblock + dir * i; /* Check, if the block is bad */ - switch ((this->bbt[block >> 2] >> (2 * (block & 0x03))) & 0x03) { + switch ((this->bbt[block >> 2] >> + (2 * (block & 0x03))) & 0x03) { case 0x01: case 0x03: continue; } - page = block << (this->bbt_erase_shift - this->page_shift); + page = block << + (this->bbt_erase_shift - this->page_shift); /* Check, if the block is used by the mirror table */ if (!md || md->pages[chip] != page) goto write; } - printk (KERN_ERR "No space left to write bad block table\n"); + printk(KERN_ERR "No space left to write bad block table\n"); return -ENOSPC; -write: + write: /* Set up shift count and masks for the flash table */ bits = td->options & NAND_BBT_NRBITS_MSK; + msk[2] = ~rcode; switch (bits) { - case 1: sft = 3; sftmsk = 0x07; msk[0] = 0x00; msk[1] = 0x01; msk[2] = ~rcode; msk[3] = 0x01; break; - case 2: sft = 2; sftmsk = 0x06; msk[0] = 0x00; msk[1] = 0x01; msk[2] = ~rcode; msk[3] = 0x03; break; - case 4: sft = 1; sftmsk = 0x04; msk[0] = 0x00; msk[1] = 0x0C; msk[2] = ~rcode; msk[3] = 0x0f; break; - case 8: sft = 0; sftmsk = 0x00; msk[0] = 0x00; msk[1] = 0x0F; msk[2] = ~rcode; msk[3] = 0xff; break; + case 1: sft = 3; sftmsk = 0x07; msk[0] = 0x00; msk[1] = 0x01; + msk[3] = 0x01; + break; + case 2: sft = 2; sftmsk = 0x06; msk[0] = 0x00; msk[1] = 0x01; + msk[3] = 0x03; + break; + case 4: sft = 1; sftmsk = 0x04; msk[0] = 0x00; msk[1] = 0x0C; + msk[3] = 0x0f; + break; + case 8: sft = 0; sftmsk = 0x00; msk[0] = 0x00; msk[1] = 0x0F; + msk[3] = 0xff; + break; default: return -EINVAL; } @@ -558,82 +655,92 @@ write: to = ((loff_t) page) << this->page_shift; - memcpy (&oobinfo, this->autooob, sizeof(oobinfo)); - oobinfo.useecc = MTD_NANDECC_PLACEONLY; - /* Must we save the block contents ? */ if (td->options & NAND_BBT_SAVECONTENT) { /* Make it block aligned */ to &= ~((loff_t) ((1 << this->bbt_erase_shift) - 1)); len = 1 << this->bbt_erase_shift; - res = mtd->read_ecc (mtd, to, len, &retlen, buf, &buf[len], &oobinfo); + res = mtd->read(mtd, to, len, &retlen, buf); if (res < 0) { if (retlen != len) { - printk (KERN_INFO "nand_bbt: Error reading block for writing the bad block table\n"); + printk(KERN_INFO "nand_bbt: Error " + "reading block for writing " + "the bad block table\n"); return res; } - printk (KERN_WARNING "nand_bbt: ECC error while reading block for writing bad block table\n"); + printk(KERN_WARNING "nand_bbt: ECC error " + "while reading block for writing " + "bad block table\n"); } + /* Read oob data */ + ops.len = (len >> this->page_shift) * mtd->oobsize; + ops.oobbuf = &buf[len]; + res = mtd->read_oob(mtd, to + mtd->writesize, &ops); + if (res < 0 || ops.retlen != ops.len) + goto outerr; + /* Calc the byte offset in the buffer */ pageoffs = page - (int)(to >> this->page_shift); offs = pageoffs << this->page_shift; /* Preset the bbt area with 0xff */ - memset (&buf[offs], 0xff, (size_t)(numblocks >> sft)); - /* Preset the bbt's oob area with 0xff */ - memset (&buf[len + pageoffs * mtd->oobsize], 0xff, - ((len >> this->page_shift) - pageoffs) * mtd->oobsize); - if (td->options & NAND_BBT_VERSION) { - buf[len + (pageoffs * mtd->oobsize) + td->veroffs] = td->version[chip]; - } + memset(&buf[offs], 0xff, (size_t) (numblocks >> sft)); + ooboffs = len + (pageoffs * mtd->oobsize); + } else { /* Calc length */ len = (size_t) (numblocks >> sft); /* Make it page aligned ! */ - len = (len + (mtd->oobblock-1)) & ~(mtd->oobblock-1); + len = (len + (mtd->writesize - 1)) & + ~(mtd->writesize - 1); /* Preset the buffer with 0xff */ - memset (buf, 0xff, len + (len >> this->page_shift) * mtd->oobsize); + memset(buf, 0xff, len + + (len >> this->page_shift)* mtd->oobsize); offs = 0; + ooboffs = len; /* Pattern is located in oob area of first page */ - memcpy (&buf[len + td->offs], td->pattern, td->len); - if (td->options & NAND_BBT_VERSION) { - buf[len + td->veroffs] = td->version[chip]; - } + memcpy(&buf[ooboffs + td->offs], td->pattern, td->len); } + if (td->options & NAND_BBT_VERSION) + buf[ooboffs + td->veroffs] = td->version[chip]; + /* walk through the memory table */ - for (i = 0; i < numblocks; ) { + for (i = 0; i < numblocks;) { uint8_t dat; dat = this->bbt[bbtoffs + (i >> 2)]; - for (j = 0; j < 4; j++ , i++) { + for (j = 0; j < 4; j++, i++) { int sftcnt = (i << (3 - sft)) & sftmsk; /* Do not store the reserved bbt blocks ! */ - buf[offs + (i >> sft)] &= ~(msk[dat & 0x03] << sftcnt); + buf[offs + (i >> sft)] &= + ~(msk[dat & 0x03] << sftcnt); dat >>= 2; } } - memset (&einfo, 0, sizeof (einfo)); + memset(&einfo, 0, sizeof(einfo)); einfo.mtd = mtd; - einfo.addr = (unsigned long) to; + einfo.addr = (unsigned long)to; einfo.len = 1 << this->bbt_erase_shift; - res = nand_erase_nand (mtd, &einfo, 1); - if (res < 0) { - printk (KERN_WARNING "nand_bbt: Error during block erase: %d\n", res); - return res; - } + res = nand_erase_nand(mtd, &einfo, 1); + if (res < 0) + goto outerr; - res = mtd->write_ecc (mtd, to, len, &retlen, buf, &buf[len], &oobinfo); - if (res < 0) { - printk (KERN_WARNING "nand_bbt: Error while writing bad block table %d\n", res); - return res; - } - printk (KERN_DEBUG "Bad block table written to 0x%08x, version 0x%02X\n", - (unsigned int) to, td->version[chip]); + res = scan_write_bbt(mtd, to, len, buf, &buf[len]); + if (res < 0) + goto outerr; + + printk(KERN_DEBUG "Bad block table written to 0x%08x, version " + "0x%02X\n", (unsigned int)to, td->version[chip]); /* Mark it as used */ td->pages[chip] = page; } return 0; + + outerr: + printk(KERN_WARNING + "nand_bbt: Error while writing bad block table %d\n", res); + return res; } /** @@ -644,27 +751,27 @@ write: * The function creates a memory based bbt by scanning the device * for manufacturer / software marked good / bad blocks */ -static inline int nand_memory_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd) +static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd) { struct nand_chip *this = mtd->priv; bd->options &= ~NAND_BBT_SCANEMPTY; - return create_bbt (mtd, this->data_buf, bd, -1); + return create_bbt(mtd, this->buffers.databuf, bd, -1); } /** - * check_create - [GENERIC] create and write bbt(s) if neccecary + * check_create - [GENERIC] create and write bbt(s) if necessary * @mtd: MTD device structure * @buf: temporary buffer * @bd: descriptor for the good/bad block search pattern * * The function checks the results of the previous call to read_bbt - * and creates / updates the bbt(s) if neccecary - * Creation is neccecary if no bbt was found for the chip/device - * Update is neccecary if one of the tables is missing or the + * and creates / updates the bbt(s) if necessary + * Creation is necessary if no bbt was found for the chip/device + * Update is necessary if one of the tables is missing or the * version nr. of one table is less than the other */ -static int check_create (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd) +static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd) { int i, chips, writeops, chipsel, res; struct nand_chip *this = mtd->priv; @@ -732,35 +839,35 @@ static int check_create (struct mtd_info rd = td; goto writecheck; } -create: + create: /* Create the bad block table by scanning the device ? */ if (!(td->options & NAND_BBT_CREATE)) continue; /* Create the table in memory by scanning the chip(s) */ - create_bbt (mtd, buf, bd, chipsel); + create_bbt(mtd, buf, bd, chipsel); td->version[i] = 1; if (md) md->version[i] = 1; -writecheck: + writecheck: /* read back first ? */ if (rd) - read_abs_bbt (mtd, buf, rd, chipsel); + read_abs_bbt(mtd, buf, rd, chipsel); /* If they weren't versioned, read both. */ if (rd2) - read_abs_bbt (mtd, buf, rd2, chipsel); + read_abs_bbt(mtd, buf, rd2, chipsel); /* Write the bad block table to the device ? */ if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) { - res = write_bbt (mtd, buf, td, md, chipsel); + res = write_bbt(mtd, buf, td, md, chipsel); if (res < 0) return res; } /* Write the mirror bad block table to the device ? */ if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) { - res = write_bbt (mtd, buf, md, td, chipsel); + res = write_bbt(mtd, buf, md, td, chipsel); if (res < 0) return res; } @@ -777,7 +884,7 @@ writecheck: * accidental erasures / writes. The regions are identified by * the mark 0x02. */ -static void mark_bbt_region (struct mtd_info *mtd, struct nand_bbt_descr *td) +static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td) { struct nand_chip *this = mtd->priv; int i, j, chips, block, nrblocks, update; @@ -795,7 +902,8 @@ static void mark_bbt_region (struct mtd_ for (i = 0; i < chips; i++) { if ((td->options & NAND_BBT_ABSPAGE) || !(td->options & NAND_BBT_WRITE)) { - if (td->pages[i] == -1) continue; + if (td->pages[i] == -1) + continue; block = td->pages[i] >> (this->bbt_erase_shift - this->page_shift); block <<= 1; oldval = this->bbt[(block >> 3)]; @@ -815,7 +923,8 @@ static void mark_bbt_region (struct mtd_ oldval = this->bbt[(block >> 3)]; newval = oldval | (0x2 << (block & 0x06)); this->bbt[(block >> 3)] = newval; - if (oldval != newval) update = 1; + if (oldval != newval) + update = 1; block += 2; } /* If we want reserved blocks to be recorded to flash, and some @@ -840,7 +949,7 @@ static void mark_bbt_region (struct mtd_ * by calling the nand_free_bbt function. * */ -int nand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd) +int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd) { struct nand_chip *this = mtd->priv; int len, res = 0; @@ -850,21 +959,21 @@ int nand_scan_bbt (struct mtd_info *mtd, len = mtd->size >> (this->bbt_erase_shift + 2); /* Allocate memory (2bit per block) */ - this->bbt = kmalloc (len, GFP_KERNEL); + this->bbt = kmalloc(len, GFP_KERNEL); if (!this->bbt) { - printk (KERN_ERR "nand_scan_bbt: Out of memory\n"); + printk(KERN_ERR "nand_scan_bbt: Out of memory\n"); return -ENOMEM; } /* Clear the memory bad block table */ - memset (this->bbt, 0x00, len); + memset(this->bbt, 0x00, len); /* If no primary table decriptor is given, scan the device * to build a memory based bad block table */ if (!td) { if ((res = nand_memory_bbt(mtd, bd))) { - printk (KERN_ERR "nand_bbt: Can't scan flash and build the RAM-based BBT\n"); - kfree (this->bbt); + printk(KERN_ERR "nand_bbt: Can't scan flash and build the RAM-based BBT\n"); + kfree(this->bbt); this->bbt = NULL; } return res; @@ -873,35 +982,34 @@ int nand_scan_bbt (struct mtd_info *mtd, /* Allocate a temporary buffer for one eraseblock incl. oob */ len = (1 << this->bbt_erase_shift); len += (len >> this->page_shift) * mtd->oobsize; - buf = kmalloc (len, GFP_KERNEL); + buf = vmalloc(len); if (!buf) { - printk (KERN_ERR "nand_bbt: Out of memory\n"); - kfree (this->bbt); + printk(KERN_ERR "nand_bbt: Out of memory\n"); + kfree(this->bbt); this->bbt = NULL; return -ENOMEM; } /* Is the bbt at a given page ? */ if (td->options & NAND_BBT_ABSPAGE) { - res = read_abs_bbts (mtd, buf, td, md); + res = read_abs_bbts(mtd, buf, td, md); } else { /* Search the bad block table using a pattern in oob */ - res = search_read_bbts (mtd, buf, td, md); + res = search_read_bbts(mtd, buf, td, md); } if (res) - res = check_create (mtd, buf, bd); + res = check_create(mtd, buf, bd); /* Prevent the bbt regions from erasing / writing */ - mark_bbt_region (mtd, td); + mark_bbt_region(mtd, td); if (md) - mark_bbt_region (mtd, md); + mark_bbt_region(mtd, md); - kfree (buf); + vfree(buf); return res; } - /** * nand_update_bbt - [NAND Interface] update bad block table(s) * @mtd: MTD device structure @@ -909,7 +1017,7 @@ int nand_scan_bbt (struct mtd_info *mtd, * * The function updates the bad block table(s) */ -int nand_update_bbt (struct mtd_info *mtd, loff_t offs) +int nand_update_bbt(struct mtd_info *mtd, loff_t offs) { struct nand_chip *this = mtd->priv; int len, res = 0, writeops = 0; @@ -925,9 +1033,9 @@ int nand_update_bbt (struct mtd_info *mt /* Allocate a temporary buffer for one eraseblock incl. oob */ len = (1 << this->bbt_erase_shift); len += (len >> this->page_shift) * mtd->oobsize; - buf = kmalloc (len, GFP_KERNEL); + buf = kmalloc(len, GFP_KERNEL); if (!buf) { - printk (KERN_ERR "nand_update_bbt: Out of memory\n"); + printk(KERN_ERR "nand_update_bbt: Out of memory\n"); return -ENOMEM; } @@ -935,7 +1043,7 @@ int nand_update_bbt (struct mtd_info *mt /* Do we have a bbt per chip ? */ if (td->options & NAND_BBT_PERCHIP) { - chip = (int) (offs >> this->chip_shift); + chip = (int)(offs >> this->chip_shift); chipsel = chip; } else { chip = 0; @@ -948,17 +1056,17 @@ int nand_update_bbt (struct mtd_info *mt /* Write the bad block table to the device ? */ if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) { - res = write_bbt (mtd, buf, td, md, chipsel); + res = write_bbt(mtd, buf, td, md, chipsel); if (res < 0) goto out; } /* Write the mirror bad block table to the device ? */ if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) { - res = write_bbt (mtd, buf, md, td, chipsel); + res = write_bbt(mtd, buf, md, td, chipsel); } -out: - kfree (buf); + out: + kfree(buf); return res; } @@ -981,14 +1089,14 @@ static struct nand_bbt_descr largepage_m }; static struct nand_bbt_descr smallpage_flashbased = { - .options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES, + .options = NAND_BBT_SCAN2NDPAGE, .offs = 5, .len = 1, .pattern = scan_ff_pattern }; static struct nand_bbt_descr largepage_flashbased = { - .options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES, + .options = NAND_BBT_SCAN2NDPAGE, .offs = 0, .len = 2, .pattern = scan_ff_pattern @@ -1036,7 +1144,7 @@ static struct nand_bbt_descr bbt_mirror_ * support for the device and calls the nand_scan_bbt function * */ -int nand_default_bbt (struct mtd_info *mtd) +int nand_default_bbt(struct mtd_info *mtd) { struct nand_chip *this = mtd->priv; @@ -1046,7 +1154,7 @@ int nand_default_bbt (struct mtd_info *m * of the good / bad information, so we _must_ store * this information in a good / bad table during * startup - */ + */ if (this->options & NAND_IS_AND) { /* Use the default pattern descriptors */ if (!this->bbt_td) { @@ -1054,10 +1162,9 @@ int nand_default_bbt (struct mtd_info *m this->bbt_md = &bbt_mirror_descr; } this->options |= NAND_USE_FLASH_BBT; - return nand_scan_bbt (mtd, &agand_flashbased); + return nand_scan_bbt(mtd, &agand_flashbased); } - /* Is a flash based bad block table requested ? */ if (this->options & NAND_USE_FLASH_BBT) { /* Use the default pattern descriptors */ @@ -1066,18 +1173,17 @@ int nand_default_bbt (struct mtd_info *m this->bbt_md = &bbt_mirror_descr; } if (!this->badblock_pattern) { - this->badblock_pattern = (mtd->oobblock > 512) ? - &largepage_flashbased : &smallpage_flashbased; + this->badblock_pattern = (mtd->writesize > 512) ? &largepage_flashbased : &smallpage_flashbased; } } else { this->bbt_td = NULL; this->bbt_md = NULL; if (!this->badblock_pattern) { - this->badblock_pattern = (mtd->oobblock > 512) ? - &largepage_memorybased : &smallpage_memorybased; + this->badblock_pattern = (mtd->writesize > 512) ? + &largepage_memorybased : &smallpage_memorybased; } } - return nand_scan_bbt (mtd, this->badblock_pattern); + return nand_scan_bbt(mtd, this->badblock_pattern); } /** @@ -1087,26 +1193,29 @@ int nand_default_bbt (struct mtd_info *m * @allowbbt: allow access to bad block table region * */ -int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt) +int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt) { struct nand_chip *this = mtd->priv; int block; - uint8_t res; + uint8_t res; /* Get block number * 2 */ - block = (int) (offs >> (this->bbt_erase_shift - 1)); + block = (int)(offs >> (this->bbt_erase_shift - 1)); res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03; - DEBUG (MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n", - (unsigned int)offs, block >> 1, res); + DEBUG(MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n", + (unsigned int)offs, block >> 1, res); switch ((int)res) { - case 0x00: return 0; - case 0x01: return 1; - case 0x02: return allowbbt ? 0 : 1; + case 0x00: + return 0; + case 0x01: + return 1; + case 0x02: + return allowbbt ? 0 : 1; } return 1; } -EXPORT_SYMBOL (nand_scan_bbt); -EXPORT_SYMBOL (nand_default_bbt); +EXPORT_SYMBOL(nand_scan_bbt); +EXPORT_SYMBOL(nand_default_bbt); diff -puN drivers/mtd/nand/nand_ecc.c~git-mtd drivers/mtd/nand/nand_ecc.c --- devel/drivers/mtd/nand/nand_ecc.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/nand/nand_ecc.c 2006-05-29 15:02:34.000000000 -0700 @@ -7,6 +7,8 @@ * Copyright (C) 2000-2004 Steven J. Hill (sjhill@realitydiluted.com) * Toshiba America Electronics Components, Inc. * + * Copyright (C) 2006 Thomas Gleixner + * * $Id: nand_ecc.c,v 1.15 2005/11/07 11:14:30 gleixner Exp $ * * This file is free software; you can redistribute it and/or modify it @@ -62,90 +64,76 @@ static const u_char nand_ecc_precalc_tab 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00 }; - -/** - * nand_trans_result - [GENERIC] create non-inverted ECC - * @reg2: line parity reg 2 - * @reg3: line parity reg 3 - * @ecc_code: ecc - * - * Creates non-inverted ECC code from line parity - */ -static void nand_trans_result(u_char reg2, u_char reg3, - u_char *ecc_code) -{ - u_char a, b, i, tmp1, tmp2; - - /* Initialize variables */ - a = b = 0x80; - tmp1 = tmp2 = 0; - - /* Calculate first ECC byte */ - for (i = 0; i < 4; i++) { - if (reg3 & a) /* LP15,13,11,9 --> ecc_code[0] */ - tmp1 |= b; - b >>= 1; - if (reg2 & a) /* LP14,12,10,8 --> ecc_code[0] */ - tmp1 |= b; - b >>= 1; - a >>= 1; - } - - /* Calculate second ECC byte */ - b = 0x80; - for (i = 0; i < 4; i++) { - if (reg3 & a) /* LP7,5,3,1 --> ecc_code[1] */ - tmp2 |= b; - b >>= 1; - if (reg2 & a) /* LP6,4,2,0 --> ecc_code[1] */ - tmp2 |= b; - b >>= 1; - a >>= 1; - } - - /* Store two of the ECC bytes */ - ecc_code[0] = tmp1; - ecc_code[1] = tmp2; -} - /** - * nand_calculate_ecc - [NAND Interface] Calculate 3 byte ECC code for 256 byte block + * nand_calculate_ecc - [NAND Interface] Calculate 3 byte ECC code + * for 256 byte block * @mtd: MTD block structure * @dat: raw data * @ecc_code: buffer for ECC */ -int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) +int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, + u_char *ecc_code) { - u_char idx, reg1, reg2, reg3; - int j; + uint8_t idx, reg1, reg2, reg3, tmp1, tmp2; + int i; /* Initialize variables */ reg1 = reg2 = reg3 = 0; - ecc_code[0] = ecc_code[1] = ecc_code[2] = 0; /* Build up column parity */ - for(j = 0; j < 256; j++) { - + for(i = 0; i < 256; i++) { /* Get CP0 - CP5 from table */ - idx = nand_ecc_precalc_table[dat[j]]; + idx = nand_ecc_precalc_table[*dat++]; reg1 ^= (idx & 0x3f); /* All bit XOR = 1 ? */ if (idx & 0x40) { - reg3 ^= (u_char) j; - reg2 ^= ~((u_char) j); + reg3 ^= (uint8_t) i; + reg2 ^= ~((uint8_t) i); } } /* Create non-inverted ECC code from line parity */ - nand_trans_result(reg2, reg3, ecc_code); + tmp1 = (reg3 & 0x80) >> 0; /* B7 -> B7 */ + tmp1 |= (reg2 & 0x80) >> 1; /* B7 -> B6 */ + tmp1 |= (reg3 & 0x40) >> 1; /* B6 -> B5 */ + tmp1 |= (reg2 & 0x40) >> 2; /* B6 -> B4 */ + tmp1 |= (reg3 & 0x20) >> 2; /* B5 -> B3 */ + tmp1 |= (reg2 & 0x20) >> 3; /* B5 -> B2 */ + tmp1 |= (reg3 & 0x10) >> 3; /* B4 -> B1 */ + tmp1 |= (reg2 & 0x10) >> 4; /* B4 -> B0 */ + + tmp2 = (reg3 & 0x08) << 4; /* B3 -> B7 */ + tmp2 |= (reg2 & 0x08) << 3; /* B3 -> B6 */ + tmp2 |= (reg3 & 0x04) << 3; /* B2 -> B5 */ + tmp2 |= (reg2 & 0x04) << 2; /* B2 -> B4 */ + tmp2 |= (reg3 & 0x02) << 2; /* B1 -> B3 */ + tmp2 |= (reg2 & 0x02) << 1; /* B1 -> B2 */ + tmp2 |= (reg3 & 0x01) << 1; /* B0 -> B1 */ + tmp2 |= (reg2 & 0x01) << 0; /* B7 -> B0 */ /* Calculate final ECC code */ - ecc_code[0] = ~ecc_code[0]; - ecc_code[1] = ~ecc_code[1]; +#ifdef CONFIG_NAND_ECC_SMC + ecc_code[0] = ~tmp2; + ecc_code[1] = ~tmp1; +#else + ecc_code[0] = ~tmp1; + ecc_code[1] = ~tmp2; +#endif ecc_code[2] = ((~reg1) << 2) | 0x03; + return 0; } +EXPORT_SYMBOL(nand_calculate_ecc); + +static inline int countbits(uint32_t byte) +{ + int res = 0; + + for (;byte; byte >>= 1) + res += byte & 0x01; + return res; +} /** * nand_correct_data - [NAND Interface] Detect and correct bit error(s) @@ -156,93 +144,54 @@ int nand_calculate_ecc(struct mtd_info * * * Detect and correct a 1 bit error for 256 byte block */ -int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc) +int nand_correct_data(struct mtd_info *mtd, u_char *dat, + u_char *read_ecc, u_char *calc_ecc) { - u_char a, b, c, d1, d2, d3, add, bit, i; + uint8_t s0, s1, s2; - /* Do error detection */ - d1 = calc_ecc[0] ^ read_ecc[0]; - d2 = calc_ecc[1] ^ read_ecc[1]; - d3 = calc_ecc[2] ^ read_ecc[2]; - - if ((d1 | d2 | d3) == 0) { - /* No errors */ +#ifdef CONFIG_NAND_ECC_SMC + s0 = calc_ecc[0] ^ read_ecc[0]; + s1 = calc_ecc[1] ^ read_ecc[1]; + s2 = calc_ecc[2] ^ read_ecc[2]; +#else + s1 = calc_ecc[0] ^ read_ecc[0]; + s0 = calc_ecc[1] ^ read_ecc[1]; + s2 = calc_ecc[2] ^ read_ecc[2]; +#endif + if ((s0 | s1 | s2) == 0) return 0; + + /* Check for a single bit error */ + if( ((s0 ^ (s0 >> 1)) & 0x55) == 0x55 && + ((s1 ^ (s1 >> 1)) & 0x55) == 0x55 && + ((s2 ^ (s2 >> 1)) & 0x54) == 0x54) { + + uint32_t byteoffs, bitnum; + + byteoffs = (s1 << 0) & 0x80; + byteoffs |= (s1 << 1) & 0x40; + byteoffs |= (s1 << 2) & 0x20; + byteoffs |= (s1 << 3) & 0x10; + + byteoffs |= (s0 >> 4) & 0x08; + byteoffs |= (s0 >> 3) & 0x04; + byteoffs |= (s0 >> 2) & 0x02; + byteoffs |= (s0 >> 1) & 0x01; + + bitnum = (s2 >> 5) & 0x04; + bitnum |= (s2 >> 4) & 0x02; + bitnum |= (s2 >> 3) & 0x01; + + dat[byteoffs] ^= (1 << bitnum); + + return 1; } - else { - a = (d1 ^ (d1 >> 1)) & 0x55; - b = (d2 ^ (d2 >> 1)) & 0x55; - c = (d3 ^ (d3 >> 1)) & 0x54; - - /* Found and will correct single bit error in the data */ - if ((a == 0x55) && (b == 0x55) && (c == 0x54)) { - c = 0x80; - add = 0; - a = 0x80; - for (i=0; i<4; i++) { - if (d1 & c) - add |= a; - c >>= 2; - a >>= 1; - } - c = 0x80; - for (i=0; i<4; i++) { - if (d2 & c) - add |= a; - c >>= 2; - a >>= 1; - } - bit = 0; - b = 0x04; - c = 0x80; - for (i=0; i<3; i++) { - if (d3 & c) - bit |= b; - c >>= 2; - b >>= 1; - } - b = 0x01; - a = dat[add]; - a ^= (b << bit); - dat[add] = a; - return 1; - } - else { - i = 0; - while (d1) { - if (d1 & 0x01) - ++i; - d1 >>= 1; - } - while (d2) { - if (d2 & 0x01) - ++i; - d2 >>= 1; - } - while (d3) { - if (d3 & 0x01) - ++i; - d3 >>= 1; - } - if (i == 1) { - /* ECC Code Error Correction */ - read_ecc[0] = calc_ecc[0]; - read_ecc[1] = calc_ecc[1]; - read_ecc[2] = calc_ecc[2]; - return 2; - } - else { - /* Uncorrectable Error */ - return -1; - } - } - } - /* Should never happen */ + if(countbits(s0 | ((uint32_t)s1 << 8) | ((uint32_t)s2 <<16)) == 1) + return 1; + return -1; } - -EXPORT_SYMBOL(nand_calculate_ecc); EXPORT_SYMBOL(nand_correct_data); MODULE_LICENSE("GPL"); diff -puN drivers/mtd/nand/nand_ids.c~git-mtd drivers/mtd/nand/nand_ids.c --- devel/drivers/mtd/nand/nand_ids.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/nand/nand_ids.c 2006-05-29 15:02:34.000000000 -0700 @@ -18,99 +18,110 @@ * Name. ID code, pagesize, chipsize in MegaByte, eraseblock size, * options * -* Pagesize; 0, 256, 512 -* 0 get this information from the extended chip ID +* Pagesize; 0, 256, 512 +* 0 get this information from the extended chip ID + 256 256 Byte page size * 512 512 Byte page size */ struct nand_flash_dev nand_flash_ids[] = { - {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, 0}, - {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, 0}, - {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, 0}, - {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, 0}, - {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0}, - {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, 0}, - {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, 0}, - {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, 0}, - {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, 0}, - {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, 0}, - - {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, 0}, - {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, 0}, - {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16}, - {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16}, - - {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, 0}, - {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, 0}, - {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16}, - {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16}, - - {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, 0}, - {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, 0}, - {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16}, - {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16}, - - {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, 0}, - {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, 0}, - {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16}, - {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16}, - - {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0}, - {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, 0}, - {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0}, - {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16}, - {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, NAND_BUSWIDTH_16}, - {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16}, - {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, NAND_BUSWIDTH_16}, - - {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0}, - - /* These are the new chips with large page size. The pagesize - * and the erasesize is determined from the extended id bytes - */ + {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, 0}, + {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, 0}, + {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, 0}, + {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, 0}, + {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0}, + {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, 0}, + {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, 0}, + {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, 0}, + {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, 0}, + {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, 0}, + + {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, 0}, + {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, 0}, + {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16}, + {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16}, + + {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, 0}, + {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, 0}, + {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16}, + {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16}, + + {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, 0}, + {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, 0}, + {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16}, + {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16}, + + {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, 0}, + {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, 0}, + {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16}, + {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16}, + + {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0}, + {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, 0}, + {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0}, + {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16}, + {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, NAND_BUSWIDTH_16}, + {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16}, + {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, NAND_BUSWIDTH_16}, + + {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0}, + + /* + * These are the new chips with large page size. The pagesize and the + * erasesize is determined from the extended id bytes + */ +#define LP_OPTIONS (NAND_SAMSUNG_LP_OPTIONS | NAND_NO_READRDY | NAND_NO_AUTOINCR) +#define LP_OPTIONS16 (LP_OPTIONS | NAND_BUSWIDTH_16) + /*512 Megabit */ - {"NAND 64MiB 1,8V 8-bit", 0xA2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, - {"NAND 64MiB 3,3V 8-bit", 0xF2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, - {"NAND 64MiB 1,8V 16-bit", 0xB2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, - {"NAND 64MiB 3,3V 16-bit", 0xC2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, + {"NAND 64MiB 1,8V 8-bit", 0xA2, 0, 64, 0, LP_OPTIONS}, + {"NAND 64MiB 3,3V 8-bit", 0xF2, 0, 64, 0, LP_OPTIONS}, + {"NAND 64MiB 1,8V 16-bit", 0xB2, 0, 64, 0, LP_OPTIONS16}, + {"NAND 64MiB 3,3V 16-bit", 0xC2, 0, 64, 0, LP_OPTIONS16}, /* 1 Gigabit */ - {"NAND 128MiB 1,8V 8-bit", 0xA1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, - {"NAND 128MiB 3,3V 8-bit", 0xF1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, - {"NAND 128MiB 1,8V 16-bit", 0xB1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, - {"NAND 128MiB 3,3V 16-bit", 0xC1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, + {"NAND 128MiB 1,8V 8-bit", 0xA1, 0, 128, 0, LP_OPTIONS}, + {"NAND 128MiB 3,3V 8-bit", 0xF1, 0, 128, 0, LP_OPTIONS}, + {"NAND 128MiB 1,8V 16-bit", 0xB1, 0, 128, 0, LP_OPTIONS16}, + {"NAND 128MiB 3,3V 16-bit", 0xC1, 0, 128, 0, LP_OPTIONS16}, /* 2 Gigabit */ - {"NAND 256MiB 1,8V 8-bit", 0xAA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, - {"NAND 256MiB 3,3V 8-bit", 0xDA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, - {"NAND 256MiB 1,8V 16-bit", 0xBA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, - {"NAND 256MiB 3,3V 16-bit", 0xCA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, + {"NAND 256MiB 1,8V 8-bit", 0xAA, 0, 256, 0, LP_OPTIONS}, + {"NAND 256MiB 3,3V 8-bit", 0xDA, 0, 256, 0, LP_OPTIONS}, + {"NAND 256MiB 1,8V 16-bit", 0xBA, 0, 256, 0, LP_OPTIONS16}, + {"NAND 256MiB 3,3V 16-bit", 0xCA, 0, 256, 0, LP_OPTIONS16}, /* 4 Gigabit */ - {"NAND 512MiB 1,8V 8-bit", 0xAC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, - {"NAND 512MiB 3,3V 8-bit", 0xDC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, - {"NAND 512MiB 1,8V 16-bit", 0xBC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, - {"NAND 512MiB 3,3V 16-bit", 0xCC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, + {"NAND 512MiB 1,8V 8-bit", 0xAC, 0, 512, 0, LP_OPTIONS}, + {"NAND 512MiB 3,3V 8-bit", 0xDC, 0, 512, 0, LP_OPTIONS}, + {"NAND 512MiB 1,8V 16-bit", 0xBC, 0, 512, 0, LP_OPTIONS16}, + {"NAND 512MiB 3,3V 16-bit", 0xCC, 0, 512, 0, LP_OPTIONS16}, /* 8 Gigabit */ - {"NAND 1GiB 1,8V 8-bit", 0xA3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, - {"NAND 1GiB 3,3V 8-bit", 0xD3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, - {"NAND 1GiB 1,8V 16-bit", 0xB3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, - {"NAND 1GiB 3,3V 16-bit", 0xC3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, + {"NAND 1GiB 1,8V 8-bit", 0xA3, 0, 1024, 0, LP_OPTIONS}, + {"NAND 1GiB 3,3V 8-bit", 0xD3, 0, 1024, 0, LP_OPTIONS}, + {"NAND 1GiB 1,8V 16-bit", 0xB3, 0, 1024, 0, LP_OPTIONS16}, + {"NAND 1GiB 3,3V 16-bit", 0xC3, 0, 1024, 0, LP_OPTIONS16}, /* 16 Gigabit */ - {"NAND 2GiB 1,8V 8-bit", 0xA5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, - {"NAND 2GiB 3,3V 8-bit", 0xD5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, - {"NAND 2GiB 1,8V 16-bit", 0xB5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, - {"NAND 2GiB 3,3V 16-bit", 0xC5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, - - /* Renesas AND 1 Gigabit. Those chips do not support extended id and have a strange page/block layout ! - * The chosen minimum erasesize is 4 * 2 * 2048 = 16384 Byte, as those chips have an array of 4 page planes - * 1 block = 2 pages, but due to plane arrangement the blocks 0-3 consists of page 0 + 4,1 + 5, 2 + 6, 3 + 7 - * Anyway JFFS2 would increase the eraseblock size so we chose a combined one which can be erased in one go - * There are more speed improvements for reads and writes possible, but not implemented now + {"NAND 2GiB 1,8V 8-bit", 0xA5, 0, 2048, 0, LP_OPTIONS}, + {"NAND 2GiB 3,3V 8-bit", 0xD5, 0, 2048, 0, LP_OPTIONS}, + {"NAND 2GiB 1,8V 16-bit", 0xB5, 0, 2048, 0, LP_OPTIONS16}, + {"NAND 2GiB 3,3V 16-bit", 0xC5, 0, 2048, 0, LP_OPTIONS16}, + + /* + * Renesas AND 1 Gigabit. Those chips do not support extended id and + * have a strange page/block layout ! The chosen minimum erasesize is + * 4 * 2 * 2048 = 16384 Byte, as those chips have an array of 4 page + * planes 1 block = 2 pages, but due to plane arrangement the blocks + * 0-3 consists of page 0 + 4,1 + 5, 2 + 6, 3 + 7 Anyway JFFS2 would + * increase the eraseblock size so we chose a combined one which can be + * erased in one go There are more speed improvements for reads and + * writes possible, but not implemented now */ - {"AND 128MiB 3,3V 8-bit", 0x01, 2048, 128, 0x4000, NAND_IS_AND | NAND_NO_AUTOINCR | NAND_4PAGE_ARRAY | BBT_AUTO_REFRESH}, + {"AND 128MiB 3,3V 8-bit", 0x01, 2048, 128, 0x4000, + NAND_IS_AND | NAND_NO_AUTOINCR |NAND_NO_READRDY | NAND_4PAGE_ARRAY | + BBT_AUTO_REFRESH + }, {NULL,} }; @@ -125,13 +136,13 @@ struct nand_manufacturers nand_manuf_ids {NAND_MFR_NATIONAL, "National"}, {NAND_MFR_RENESAS, "Renesas"}, {NAND_MFR_STMICRO, "ST Micro"}, - {NAND_MFR_HYNIX, "Hynix"}, + {NAND_MFR_HYNIX, "Hynix"}, {0x0, "Unknown"} }; -EXPORT_SYMBOL (nand_manuf_ids); -EXPORT_SYMBOL (nand_flash_ids); +EXPORT_SYMBOL(nand_manuf_ids); +EXPORT_SYMBOL(nand_flash_ids); -MODULE_LICENSE ("GPL"); -MODULE_AUTHOR ("Thomas Gleixner "); -MODULE_DESCRIPTION ("Nand device & manufacturer ID's"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Thomas Gleixner "); +MODULE_DESCRIPTION("Nand device & manufacturer IDs"); diff -puN drivers/mtd/nand/nandsim.c~git-mtd drivers/mtd/nand/nandsim.c --- devel/drivers/mtd/nand/nandsim.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/nand/nandsim.c 2006-05-29 15:02:34.000000000 -0700 @@ -369,7 +369,7 @@ init_nandsim(struct mtd_info *mtd) /* Initialize the NAND flash parameters */ ns->busw = chip->options & NAND_BUSWIDTH_16 ? 16 : 8; ns->geom.totsz = mtd->size; - ns->geom.pgsz = mtd->oobblock; + ns->geom.pgsz = mtd->writesize; ns->geom.oobsz = mtd->oobsize; ns->geom.secsz = mtd->erasesize; ns->geom.pgszoob = ns->geom.pgsz + ns->geom.oobsz; @@ -1071,68 +1071,6 @@ switch_state(struct nandsim *ns) } } -static void -ns_hwcontrol(struct mtd_info *mtd, int cmd) -{ - struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv; - - switch (cmd) { - - /* set CLE line high */ - case NAND_CTL_SETCLE: - NS_DBG("ns_hwcontrol: start command latch cycles\n"); - ns->lines.cle = 1; - break; - - /* set CLE line low */ - case NAND_CTL_CLRCLE: - NS_DBG("ns_hwcontrol: stop command latch cycles\n"); - ns->lines.cle = 0; - break; - - /* set ALE line high */ - case NAND_CTL_SETALE: - NS_DBG("ns_hwcontrol: start address latch cycles\n"); - ns->lines.ale = 1; - break; - - /* set ALE line low */ - case NAND_CTL_CLRALE: - NS_DBG("ns_hwcontrol: stop address latch cycles\n"); - ns->lines.ale = 0; - break; - - /* set WP line high */ - case NAND_CTL_SETWP: - NS_DBG("ns_hwcontrol: enable write protection\n"); - ns->lines.wp = 1; - break; - - /* set WP line low */ - case NAND_CTL_CLRWP: - NS_DBG("ns_hwcontrol: disable write protection\n"); - ns->lines.wp = 0; - break; - - /* set CE line low */ - case NAND_CTL_SETNCE: - NS_DBG("ns_hwcontrol: enable chip\n"); - ns->lines.ce = 1; - break; - - /* set CE line high */ - case NAND_CTL_CLRNCE: - NS_DBG("ns_hwcontrol: disable chip\n"); - ns->lines.ce = 0; - break; - - default: - NS_ERR("hwcontrol: unknown command\n"); - } - - return; -} - static u_char ns_nand_read_byte(struct mtd_info *mtd) { @@ -1359,6 +1297,18 @@ ns_nand_write_byte(struct mtd_info *mtd, return; } +static void ns_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int bitmask) +{ + struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv; + + ns->lines.cle = bitmask & NAND_CLE ? 1 : 0; + ns->lines.ale = bitmask & NAND_ALE ? 1 : 0; + ns->lines.ce = bitmask & NAND_NCE ? 1 : 0; + + if (cmd != NAND_CMD_NONE) + ns_nand_write_byte(mtd, cmd); +} + static int ns_device_ready(struct mtd_info *mtd) { @@ -1377,17 +1327,6 @@ ns_nand_read_word(struct mtd_info *mtd) } static void -ns_nand_write_word(struct mtd_info *mtd, uint16_t word) -{ - struct nand_chip *chip = (struct nand_chip *)mtd->priv; - - NS_DBG("write_word\n"); - - chip->write_byte(mtd, word & 0xFF); - chip->write_byte(mtd, word >> 8); -} - -static void ns_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) { struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv; @@ -1514,16 +1453,14 @@ static int __init ns_init_module(void) /* * Register simulator's callbacks. */ - chip->hwcontrol = ns_hwcontrol; + chip->cmd_ctrl = ns_hwcontrol; chip->read_byte = ns_nand_read_byte; chip->dev_ready = ns_device_ready; - chip->write_byte = ns_nand_write_byte; chip->write_buf = ns_nand_write_buf; chip->read_buf = ns_nand_read_buf; chip->verify_buf = ns_nand_verify_buf; - chip->write_word = ns_nand_write_word; chip->read_word = ns_nand_read_word; - chip->eccmode = NAND_ECC_SOFT; + chip->ecc.mode = NAND_ECC_SOFT; chip->options |= NAND_SKIP_BBTSCAN; /* @@ -1546,6 +1483,8 @@ static int __init ns_init_module(void) chip->options |= NAND_BUSWIDTH_16; } + nsmtd->owner = THIS_MODULE; + if ((retval = nand_scan(nsmtd, 1)) != 0) { NS_ERR("can't register NAND Simulator\n"); if (retval > 0) diff -puN /dev/null drivers/mtd/nand/ndfc.c --- /dev/null 2006-05-29 10:18:53.280907750 -0700 +++ devel-akpm/drivers/mtd/nand/ndfc.c 2006-05-29 15:02:34.000000000 -0700 @@ -0,0 +1,316 @@ +/* + * drivers/mtd/ndfc.c + * + * Overview: + * Platform independend driver for NDFC (NanD Flash Controller) + * integrated into EP440 cores + * + * Author: Thomas Gleixner + * + * Copyright 2006 IBM + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +struct ndfc_nand_mtd { + struct mtd_info mtd; + struct nand_chip chip; + struct platform_nand_chip *pl_chip; +}; + +static struct ndfc_nand_mtd ndfc_mtd[NDFC_MAX_BANKS]; + +struct ndfc_controller { + void __iomem *ndfcbase; + struct nand_hw_control ndfc_control; + atomic_t childs_active; +}; + +static struct ndfc_controller ndfc_ctrl; + +static void ndfc_select_chip(struct mtd_info *mtd, int chip) +{ + uint32_t ccr; + struct ndfc_controller *ndfc = &ndfc_ctrl; + struct nand_chip *nandchip = mtd->priv; + struct ndfc_nand_mtd *nandmtd = nandchip->priv; + struct platform_nand_chip *pchip = nandmtd->pl_chip; + + ccr = __raw_readl(ndfc->ndfcbase + NDFC_CCR); + if (chip >= 0) { + ccr &= ~NDFC_CCR_BS_MASK; + ccr |= NDFC_CCR_BS(chip + pchip->chip_offset); + } else + ccr |= NDFC_CCR_RESET_CE; + writel(ccr, ndfc->ndfcbase + NDFC_CCR); +} + +static void ndfc_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *chip = mtd->priv; + + if (cmd == NAND_CMD_NONE) + return; + + if (ctrl & NAND_CLE) + writel(cmd & 0xFF, chip->IO_ADDR_W + NDFC_CMD); + else + writel(cmd & 0xFF, chip->IO_ADDR_W + NDFC_ALE); +} + +static int ndfc_ready(struct mtd_info *mtd) +{ + struct ndfc_controller *ndfc = &ndfc_ctrl; + + return __raw_readl(ndfc->ndfcbase + NDFC_STAT) & NDFC_STAT_IS_READY; +} + +static void ndfc_enable_hwecc(struct mtd_info *mtd, int mode) +{ + uint32_t ccr; + struct ndfc_controller *ndfc = &ndfc_ctrl; + + ccr = __raw_readl(ndfc->ndfcbase + NDFC_CCR); + ccr |= NDFC_CCR_RESET_ECC; + __raw_writel(ccr, ndfc->ndfcbase + NDFC_CCR); + wmb(); +} + +static int ndfc_calculate_ecc(struct mtd_info *mtd, + const u_char *dat, u_char *ecc_code) +{ + struct ndfc_controller *ndfc = &ndfc_ctrl; + uint32_t ecc; + uint8_t *p = (uint8_t *)&ecc; + + wmb(); + ecc = __raw_readl(ndfc->ndfcbase + NDFC_ECC); + ecc_code[0] = p[1]; + ecc_code[1] = p[2]; + ecc_code[2] = p[3]; + + return 0; +} + +/* + * Speedups for buffer read/write/verify + * + * NDFC allows 32bit read/write of data. So we can speed up the buffer + * functions. No further checking, as nand_base will always read/write + * page aligned. + */ +static void ndfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + struct ndfc_controller *ndfc = &ndfc_ctrl; + uint32_t *p = (uint32_t *) buf; + + for(;len > 0; len -= 4) + *p++ = __raw_readl(ndfc->ndfcbase + NDFC_DATA); +} + +static void ndfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) +{ + struct ndfc_controller *ndfc = &ndfc_ctrl; + uint32_t *p = (uint32_t *) buf; + + for(;len > 0; len -= 4) + __raw_writel(*p++, ndfc->ndfcbase + NDFC_DATA); +} + +static int ndfc_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len) +{ + struct ndfc_controller *ndfc = &ndfc_ctrl; + uint32_t *p = (uint32_t *) buf; + + for(;len > 0; len -= 4) + if (*p++ != __raw_readl(ndfc->ndfcbase + NDFC_DATA)) + return -EFAULT; + return 0; +} + +/* + * Initialize chip structure + */ +static void ndfc_chip_init(struct ndfc_nand_mtd *mtd) +{ + struct ndfc_controller *ndfc = &ndfc_ctrl; + struct nand_chip *chip = &mtd->chip; + + chip->IO_ADDR_R = ndfc->ndfcbase + NDFC_DATA; + chip->IO_ADDR_W = ndfc->ndfcbase + NDFC_DATA; + chip->cmd_ctrl = ndfc_hwcontrol; + chip->dev_ready = ndfc_ready; + chip->select_chip = ndfc_select_chip; + chip->chip_delay = 50; + chip->priv = mtd; + chip->options = mtd->pl_chip->options; + chip->controller = &ndfc->ndfc_control; + chip->read_buf = ndfc_read_buf; + chip->write_buf = ndfc_write_buf; + chip->verify_buf = ndfc_verify_buf; + chip->ecc.correct = nand_correct_data; + chip->ecc.hwctl = ndfc_enable_hwecc; + chip->ecc.calculate = ndfc_calculate_ecc; + chip->ecc.mode = NAND_ECC_HW; + chip->ecc.size = 256; + chip->ecc.bytes = 3; + chip->ecclayout = mtd->pl_chip->ecclayout; + mtd->mtd.priv = chip; + mtd->mtd.owner = THIS_MODULE; +} + +static int ndfc_chip_probe(struct platform_device *pdev) +{ + struct platform_nand_chip *nc = pdev->dev.platform_data; + struct ndfc_chip_settings *settings = nc->priv; + struct ndfc_controller *ndfc = &ndfc_ctrl; + struct ndfc_nand_mtd *nandmtd; + + if (nc->chip_offset >= NDFC_MAX_BANKS || nc->nr_chips > NDFC_MAX_BANKS) + return -EINVAL; + + /* Set the bank settings */ + __raw_writel(settings->bank_settings, + ndfc->ndfcbase + NDFC_BCFG0 + (nc->chip_offset << 2)); + + nandmtd = &ndfc_mtd[pdev->id]; + if (nandmtd->pl_chip) + return -EBUSY; + + nandmtd->pl_chip = nc; + ndfc_chip_init(nandmtd); + + /* Scan for chips */ + if (nand_scan(&nandmtd->mtd, nc->nr_chips)) { + nandmtd->pl_chip = NULL; + return -ENODEV; + } + +#ifdef CONFIG_MTD_PARTITIONS + printk("Number of partitions %d\n", nc->nr_partitions); + if (nc->nr_partitions) { + struct mtd_info *mtd_ubi; + nc->partitions[NAND_PARTS_CONTENT_IDX].mtdp = &mtd_ubi; + + add_mtd_device(&nandmtd->mtd); /* for testing */ + add_mtd_partitions(&nandmtd->mtd, + nc->partitions, + nc->nr_partitions); + + add_mtd_device(mtd_ubi); + + } else +#else + add_mtd_device(&nandmtd->mtd); +#endif + + atomic_inc(&ndfc->childs_active); + return 0; +} + +static int ndfc_chip_remove(struct platform_device *pdev) +{ + return 0; +} + +static int ndfc_nand_probe(struct platform_device *pdev) +{ + struct platform_nand_ctrl *nc = pdev->dev.platform_data; + struct ndfc_controller_settings *settings = nc->priv; + struct resource *res = pdev->resource; + struct ndfc_controller *ndfc = &ndfc_ctrl; + unsigned long long phys = setting->erpn | res->start; + + ndfc->ndfcbase = ioremap64(phys, res->end - res->start + 1); + if (!ndfc->ndfcbase) { + printk(KERN_ERR "NDFC: ioremap failed\n"); + return -EIO; + } + + __raw_writel(settings->ccr_settings, ndfc->ndfcbase + NDFC_CCR); + + spin_lock_init(&ndfc->ndfc_control.lock); + init_waitqueue_head(&ndfc->ndfc_control.wq); + + platform_set_drvdata(pdev, ndfc); + + printk("NDFC NAND Driver initialized. Chip-Rev: 0x%08x\n", + __raw_readl(ndfc->ndfcbase + NDFC_REVID)); + + return 0; +} + +static int ndfc_nand_remove(struct platform_device *pdev) +{ + struct ndfc_controller *ndfc = platform_get_drvdata(pdev); + + if (atomic_read(&ndfc->childs_active)) + return -EBUSY; + + if (ndfc) { + platform_set_drvdata(pdev, NULL); + iounmap(ndfc_ctrl.ndfcbase); + ndfc_ctrl.ndfcbase = NULL; + } + return 0; +} + +/* driver device registration */ + +static struct platform_driver ndfc_chip_driver = { + .probe = ndfc_chip_probe, + .remove = ndfc_chip_remove, + .driver = { + .name = "ndfc-chip", + .owner = THIS_MODULE, + }, +}; + +static struct platform_driver ndfc_nand_driver = { + .probe = ndfc_nand_probe, + .remove = ndfc_nand_remove, + .driver = { + .name = "ndfc-nand", + .owner = THIS_MODULE, + }, +}; + +static int __init ndfc_nand_init(void) +{ + int ret; + + spin_lock_init(&ndfc_ctrl.ndfc_control.lock); + init_waitqueue_head(&ndfc_ctrl.ndfc_control.wq); + + ret = platform_driver_register(&ndfc_nand_driver); + if (!ret) + ret = platform_driver_register(&ndfc_chip_driver); + return ret; +} + +static void __exit ndfc_nand_exit(void) +{ + platform_driver_unregister(&ndfc_chip_driver); + platform_driver_unregister(&ndfc_nand_driver); +} + +module_init(ndfc_nand_init); +module_exit(ndfc_nand_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Thomas Gleixner "); +MODULE_DESCRIPTION("Platform driver for NDFC"); diff -puN drivers/mtd/nand/ppchameleonevb.c~git-mtd drivers/mtd/nand/ppchameleonevb.c --- devel/drivers/mtd/nand/ppchameleonevb.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/nand/ppchameleonevb.c 2006-05-29 15:02:34.000000000 -0700 @@ -58,21 +58,21 @@ /* * MTD structure for PPChameleonEVB board */ -static struct mtd_info *ppchameleon_mtd = NULL; +static struct mtd_info *ppchameleon_mtd = NULL; static struct mtd_info *ppchameleonevb_mtd = NULL; /* * Module stuff */ -static unsigned long ppchameleon_fio_pbase = CFG_NAND0_PADDR; +static unsigned long ppchameleon_fio_pbase = CFG_NAND0_PADDR; static unsigned long ppchameleonevb_fio_pbase = CFG_NAND1_PADDR; #ifdef MODULE module_param(ppchameleon_fio_pbase, ulong, 0); module_param(ppchameleonevb_fio_pbase, ulong, 0); #else -__setup("ppchameleon_fio_pbase=",ppchameleon_fio_pbase); -__setup("ppchameleonevb_fio_pbase=",ppchameleonevb_fio_pbase); +__setup("ppchameleon_fio_pbase=", ppchameleon_fio_pbase); +__setup("ppchameleonevb_fio_pbase=", ppchameleonevb_fio_pbase); #endif #ifdef CONFIG_MTD_PARTITIONS @@ -80,82 +80,96 @@ __setup("ppchameleonevb_fio_pbase=",ppch * Define static partitions for flash devices */ static struct mtd_partition partition_info_hi[] = { - { name: "PPChameleon HI Nand Flash", - offset: 0, - size: 128*1024*1024 } + { .name = "PPChameleon HI Nand Flash", + offset = 0, + .size = 128 * 1024 * 1024 + } }; static struct mtd_partition partition_info_me[] = { - { name: "PPChameleon ME Nand Flash", - offset: 0, - size: 32*1024*1024 } + { .name = "PPChameleon ME Nand Flash", + .offset = 0, + .size = 32 * 1024 * 1024 + } }; static struct mtd_partition partition_info_evb[] = { - { name: "PPChameleonEVB Nand Flash", - offset: 0, - size: 32*1024*1024 } + { .name = "PPChameleonEVB Nand Flash", + .offset = 0, + .size = 32 * 1024 * 1024 + } }; #define NUM_PARTITIONS 1 -extern int parse_cmdline_partitions(struct mtd_info *master, - struct mtd_partition **pparts, - const char *mtd_id); +extern int parse_cmdline_partitions(struct mtd_info *master, struct mtd_partition **pparts, const char *mtd_id); #endif - /* * hardware specific access to control-lines */ -static void ppchameleon_hwcontrol(struct mtd_info *mtdinfo, int cmd) +static void ppchameleon_hwcontrol(struct mtd_info *mtdinfo, int cmd, + unsigned int ctrl) { - switch(cmd) { + struct nand_chip *chip = mtd->priv; - case NAND_CTL_SETCLE: - MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND0_PADDR); - break; - case NAND_CTL_CLRCLE: - MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND0_PADDR); - break; - case NAND_CTL_SETALE: - MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND0_PADDR); - break; - case NAND_CTL_CLRALE: - MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND0_PADDR); - break; - case NAND_CTL_SETNCE: + if (ctrl & NAND_CTRL_CHANGE) { +#error Missing headerfiles. No way to fix this. -tglx + switch (cmd) { + case NAND_CTL_SETCLE: + MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND0_PADDR); + break; + case NAND_CTL_CLRCLE: + MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND0_PADDR); + break; + case NAND_CTL_SETALE: + MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND0_PADDR); + break; + case NAND_CTL_CLRALE: + MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND0_PADDR); + break; + case NAND_CTL_SETNCE: MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND0_PADDR); - break; - case NAND_CTL_CLRNCE: + break; + case NAND_CTL_CLRNCE: MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND0_PADDR); - break; + break; + } } + if (cmd != NAND_CMD_NONE) + writeb(cmd, chip->IO_ADDR_W); } -static void ppchameleonevb_hwcontrol(struct mtd_info *mtdinfo, int cmd) +static void ppchameleonevb_hwcontrol(struct mtd_info *mtdinfo, int cmd, + unsigned int ctrl) { - switch(cmd) { + struct nand_chip *chip = mtd->priv; - case NAND_CTL_SETCLE: - MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND1_PADDR); - break; - case NAND_CTL_CLRCLE: - MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND1_PADDR); - break; - case NAND_CTL_SETALE: - MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND1_PADDR); - break; - case NAND_CTL_CLRALE: - MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND1_PADDR); - break; - case NAND_CTL_SETNCE: - MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND1_PADDR); - break; - case NAND_CTL_CLRNCE: - MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND1_PADDR); - break; + if (ctrl & NAND_CTRL_CHANGE) { +#error Missing headerfiles. No way to fix this. -tglx + switch (cmd) { + case NAND_CTL_SETCLE: + MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND1_PADDR); + break; + case NAND_CTL_CLRCLE: + MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND1_PADDR); + break; + case NAND_CTL_SETALE: + MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND1_PADDR); + break; + case NAND_CTL_CLRALE: + MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND1_PADDR); + break; + case NAND_CTL_SETNCE: + MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND1_PADDR); + break; + case NAND_CTL_CLRNCE: + MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND1_PADDR); + break; + } } + if (cmd != NAND_CMD_NONE) + writeb(cmd, chip->IO_ADDR_W); } #ifdef USE_READY_BUSY_PIN @@ -164,15 +178,15 @@ static void ppchameleonevb_hwcontrol(str */ static int ppchameleon_device_ready(struct mtd_info *minfo) { - if (in_be32((volatile unsigned*)GPIO0_IR) & NAND_RB_GPIO_PIN) + if (in_be32((volatile unsigned *)GPIO0_IR) & NAND_RB_GPIO_PIN) return 1; return 0; } static int ppchameleonevb_device_ready(struct mtd_info *minfo) { - if (in_be32((volatile unsigned*)GPIO0_IR) & NAND_EVB_RB_GPIO_PIN) - return 1; + if (in_be32((volatile unsigned *)GPIO0_IR) & NAND_EVB_RB_GPIO_PIN) + return 1; return 0; } #endif @@ -185,7 +199,7 @@ const char *part_probes_evb[] = { "cmdli /* * Main initialization routine */ -static int __init ppchameleonevb_init (void) +static int __init ppchameleonevb_init(void) { struct nand_chip *this; const char *part_type = 0; @@ -194,13 +208,11 @@ static int __init ppchameleonevb_init (v void __iomem *ppchameleon_fio_base; void __iomem *ppchameleonevb_fio_base; - /********************************* * Processor module NAND (if any) * *********************************/ /* Allocate memory for MTD device structure and private data */ - ppchameleon_mtd = kmalloc(sizeof(struct mtd_info) + - sizeof(struct nand_chip), GFP_KERNEL); + ppchameleon_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); if (!ppchameleon_mtd) { printk("Unable to allocate PPChameleon NAND MTD device structure.\n"); return -ENOMEM; @@ -208,63 +220,65 @@ static int __init ppchameleonevb_init (v /* map physical address */ ppchameleon_fio_base = ioremap(ppchameleon_fio_pbase, SZ_4M); - if(!ppchameleon_fio_base) { + if (!ppchameleon_fio_base) { printk("ioremap PPChameleon NAND flash failed\n"); kfree(ppchameleon_mtd); return -EIO; } /* Get pointer to private data */ - this = (struct nand_chip *) (&ppchameleon_mtd[1]); + this = (struct nand_chip *)(&ppchameleon_mtd[1]); /* Initialize structures */ - memset((char *) ppchameleon_mtd, 0, sizeof(struct mtd_info)); - memset((char *) this, 0, sizeof(struct nand_chip)); + memset(ppchameleon_mtd, 0, sizeof(struct mtd_info)); + memset(this, 0, sizeof(struct nand_chip)); /* Link the private data with the MTD structure */ ppchameleon_mtd->priv = this; + ppchameleon_mtd->owner = THIS_MODULE; - /* Initialize GPIOs */ + /* Initialize GPIOs */ /* Pin mapping for NAND chip */ /* - CE GPIO_01 - CLE GPIO_02 - ALE GPIO_03 - R/B GPIO_04 - */ + CE GPIO_01 + CLE GPIO_02 + ALE GPIO_03 + R/B GPIO_04 + */ /* output select */ - out_be32((volatile unsigned*)GPIO0_OSRH, in_be32((volatile unsigned*)GPIO0_OSRH) & 0xC0FFFFFF); + out_be32((volatile unsigned *)GPIO0_OSRH, in_be32((volatile unsigned *)GPIO0_OSRH) & 0xC0FFFFFF); /* three-state select */ - out_be32((volatile unsigned*)GPIO0_TSRH, in_be32((volatile unsigned*)GPIO0_TSRH) & 0xC0FFFFFF); + out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xC0FFFFFF); /* enable output driver */ - out_be32((volatile unsigned*)GPIO0_TCR, in_be32((volatile unsigned*)GPIO0_TCR) | NAND_nCE_GPIO_PIN | NAND_CLE_GPIO_PIN | NAND_ALE_GPIO_PIN); + out_be32((volatile unsigned *)GPIO0_TCR, + in_be32((volatile unsigned *)GPIO0_TCR) | NAND_nCE_GPIO_PIN | NAND_CLE_GPIO_PIN | NAND_ALE_GPIO_PIN); #ifdef USE_READY_BUSY_PIN /* three-state select */ - out_be32((volatile unsigned*)GPIO0_TSRH, in_be32((volatile unsigned*)GPIO0_TSRH) & 0xFF3FFFFF); + out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xFF3FFFFF); /* high-impedecence */ - out_be32((volatile unsigned*)GPIO0_TCR, in_be32((volatile unsigned*)GPIO0_TCR) & (~NAND_RB_GPIO_PIN)); + out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) & (~NAND_RB_GPIO_PIN)); /* input select */ - out_be32((volatile unsigned*)GPIO0_ISR1H, (in_be32((volatile unsigned*)GPIO0_ISR1H) & 0xFF3FFFFF) | 0x00400000); + out_be32((volatile unsigned *)GPIO0_ISR1H, + (in_be32((volatile unsigned *)GPIO0_ISR1H) & 0xFF3FFFFF) | 0x00400000); #endif /* insert callbacks */ this->IO_ADDR_R = ppchameleon_fio_base; this->IO_ADDR_W = ppchameleon_fio_base; - this->hwcontrol = ppchameleon_hwcontrol; + this->cmd_ctrl = ppchameleon_hwcontrol; #ifdef USE_READY_BUSY_PIN this->dev_ready = ppchameleon_device_ready; #endif this->chip_delay = NAND_BIG_DELAY_US; /* ECC mode */ - this->eccmode = NAND_ECC_SOFT; + this->ecc.mode = NAND_ECC_SOFT; /* Scan to find existence of the device (it could not be mounted) */ - if (nand_scan (ppchameleon_mtd, 1)) { + if (nand_scan(ppchameleon_mtd, 1)) { iounmap((void *)ppchameleon_fio_base); - kfree (ppchameleon_mtd); + kfree(ppchameleon_mtd); goto nand_evb_init; } - #ifndef USE_READY_BUSY_PIN /* Adjust delay if necessary */ if (ppchameleon_mtd->size == NAND_SMALL_SIZE) @@ -275,12 +289,11 @@ static int __init ppchameleonevb_init (v ppchameleon_mtd->name = "ppchameleon-nand"; mtd_parts_nb = parse_mtd_partitions(ppchameleon_mtd, part_probes, &mtd_parts, 0); if (mtd_parts_nb > 0) - part_type = "command line"; + part_type = "command line"; else - mtd_parts_nb = 0; + mtd_parts_nb = 0; #endif - if (mtd_parts_nb == 0) - { + if (mtd_parts_nb == 0) { if (ppchameleon_mtd->size == NAND_SMALL_SIZE) mtd_parts = partition_info_me; else @@ -293,13 +306,12 @@ static int __init ppchameleonevb_init (v printk(KERN_NOTICE "Using %s partition definition\n", part_type); add_mtd_partitions(ppchameleon_mtd, mtd_parts, mtd_parts_nb); -nand_evb_init: + nand_evb_init: /**************************** * EVB NAND (always present) * ****************************/ /* Allocate memory for MTD device structure and private data */ - ppchameleonevb_mtd = kmalloc(sizeof(struct mtd_info) + - sizeof(struct nand_chip), GFP_KERNEL); + ppchameleonevb_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); if (!ppchameleonevb_mtd) { printk("Unable to allocate PPChameleonEVB NAND MTD device structure.\n"); return -ENOMEM; @@ -307,77 +319,76 @@ nand_evb_init: /* map physical address */ ppchameleonevb_fio_base = ioremap(ppchameleonevb_fio_pbase, SZ_4M); - if(!ppchameleonevb_fio_base) { + if (!ppchameleonevb_fio_base) { printk("ioremap PPChameleonEVB NAND flash failed\n"); kfree(ppchameleonevb_mtd); return -EIO; } /* Get pointer to private data */ - this = (struct nand_chip *) (&ppchameleonevb_mtd[1]); + this = (struct nand_chip *)(&ppchameleonevb_mtd[1]); /* Initialize structures */ - memset((char *) ppchameleonevb_mtd, 0, sizeof(struct mtd_info)); - memset((char *) this, 0, sizeof(struct nand_chip)); + memset(ppchameleonevb_mtd, 0, sizeof(struct mtd_info)); + memset(this, 0, sizeof(struct nand_chip)); /* Link the private data with the MTD structure */ ppchameleonevb_mtd->priv = this; - /* Initialize GPIOs */ + /* Initialize GPIOs */ /* Pin mapping for NAND chip */ /* - CE GPIO_14 - CLE GPIO_15 - ALE GPIO_16 - R/B GPIO_31 - */ + CE GPIO_14 + CLE GPIO_15 + ALE GPIO_16 + R/B GPIO_31 + */ /* output select */ - out_be32((volatile unsigned*)GPIO0_OSRH, in_be32((volatile unsigned*)GPIO0_OSRH) & 0xFFFFFFF0); - out_be32((volatile unsigned*)GPIO0_OSRL, in_be32((volatile unsigned*)GPIO0_OSRL) & 0x3FFFFFFF); + out_be32((volatile unsigned *)GPIO0_OSRH, in_be32((volatile unsigned *)GPIO0_OSRH) & 0xFFFFFFF0); + out_be32((volatile unsigned *)GPIO0_OSRL, in_be32((volatile unsigned *)GPIO0_OSRL) & 0x3FFFFFFF); /* three-state select */ - out_be32((volatile unsigned*)GPIO0_TSRH, in_be32((volatile unsigned*)GPIO0_TSRH) & 0xFFFFFFF0); - out_be32((volatile unsigned*)GPIO0_TSRL, in_be32((volatile unsigned*)GPIO0_TSRL) & 0x3FFFFFFF); + out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xFFFFFFF0); + out_be32((volatile unsigned *)GPIO0_TSRL, in_be32((volatile unsigned *)GPIO0_TSRL) & 0x3FFFFFFF); /* enable output driver */ - out_be32((volatile unsigned*)GPIO0_TCR, in_be32((volatile unsigned*)GPIO0_TCR) | NAND_EVB_nCE_GPIO_PIN | + out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) | NAND_EVB_nCE_GPIO_PIN | NAND_EVB_CLE_GPIO_PIN | NAND_EVB_ALE_GPIO_PIN); #ifdef USE_READY_BUSY_PIN /* three-state select */ - out_be32((volatile unsigned*)GPIO0_TSRL, in_be32((volatile unsigned*)GPIO0_TSRL) & 0xFFFFFFFC); + out_be32((volatile unsigned *)GPIO0_TSRL, in_be32((volatile unsigned *)GPIO0_TSRL) & 0xFFFFFFFC); /* high-impedecence */ - out_be32((volatile unsigned*)GPIO0_TCR, in_be32((volatile unsigned*)GPIO0_TCR) & (~NAND_EVB_RB_GPIO_PIN)); + out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) & (~NAND_EVB_RB_GPIO_PIN)); /* input select */ - out_be32((volatile unsigned*)GPIO0_ISR1L, (in_be32((volatile unsigned*)GPIO0_ISR1L) & 0xFFFFFFFC) | 0x00000001); + out_be32((volatile unsigned *)GPIO0_ISR1L, + (in_be32((volatile unsigned *)GPIO0_ISR1L) & 0xFFFFFFFC) | 0x00000001); #endif /* insert callbacks */ this->IO_ADDR_R = ppchameleonevb_fio_base; this->IO_ADDR_W = ppchameleonevb_fio_base; - this->hwcontrol = ppchameleonevb_hwcontrol; + this->cmd_ctrl = ppchameleonevb_hwcontrol; #ifdef USE_READY_BUSY_PIN this->dev_ready = ppchameleonevb_device_ready; #endif this->chip_delay = NAND_SMALL_DELAY_US; /* ECC mode */ - this->eccmode = NAND_ECC_SOFT; + this->ecc.mode = NAND_ECC_SOFT; /* Scan to find existence of the device */ - if (nand_scan (ppchameleonevb_mtd, 1)) { + if (nand_scan(ppchameleonevb_mtd, 1)) { iounmap((void *)ppchameleonevb_fio_base); - kfree (ppchameleonevb_mtd); + kfree(ppchameleonevb_mtd); return -ENXIO; } - #ifdef CONFIG_MTD_PARTITIONS ppchameleonevb_mtd->name = NAND_EVB_MTD_NAME; mtd_parts_nb = parse_mtd_partitions(ppchameleonevb_mtd, part_probes_evb, &mtd_parts, 0); if (mtd_parts_nb > 0) - part_type = "command line"; + part_type = "command line"; else - mtd_parts_nb = 0; + mtd_parts_nb = 0; #endif - if (mtd_parts_nb == 0) - { + if (mtd_parts_nb == 0) { mtd_parts = partition_info_evb; mtd_parts_nb = NUM_PARTITIONS; part_type = "static"; @@ -390,18 +401,19 @@ nand_evb_init: /* Return happy */ return 0; } + module_init(ppchameleonevb_init); /* * Clean up routine */ -static void __exit ppchameleonevb_cleanup (void) +static void __exit ppchameleonevb_cleanup(void) { struct nand_chip *this; /* Release resources, unregister device(s) */ - nand_release (ppchameleon_mtd); - nand_release (ppchameleonevb_mtd); + nand_release(ppchameleon_mtd); + nand_release(ppchameleonevb_mtd); /* Release iomaps */ this = (struct nand_chip *) &ppchameleon_mtd[1]; diff -puN drivers/mtd/nand/rtc_from4.c~git-mtd drivers/mtd/nand/rtc_from4.c --- devel/drivers/mtd/nand/rtc_from4.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/nand/rtc_from4.c 2006-05-29 15:02:34.000000000 -0700 @@ -97,12 +97,12 @@ static struct mtd_info *rtc_from4_mtd = static void __iomem *rtc_from4_fio_base = (void *)P2SEGADDR(RTC_FROM4_FIO_BASE); static const struct mtd_partition partition_info[] = { - { - .name = "Renesas flash partition 1", - .offset = 0, - .size = MTDPART_SIZ_FULL - }, + { + .name = "Renesas flash partition 1", + .offset = 0, + .size = MTDPART_SIZ_FULL}, }; + #define NUM_PARTITIONS 1 /* @@ -111,8 +111,8 @@ static const struct mtd_partition partit * NAND_BBT_CREATE and/or NAND_BBT_WRITE * */ -static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' }; -static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' }; +static uint8_t bbt_pattern[] = { 'B', 'b', 't', '0' }; +static uint8_t mirror_pattern[] = { '1', 't', 'b', 'B' }; static struct nand_bbt_descr rtc_from4_bbt_main_descr = { .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE @@ -134,8 +134,6 @@ static struct nand_bbt_descr rtc_from4_b .pattern = mirror_pattern }; - - #ifdef RTC_FROM4_HWECC /* the Reed Solomon control structure */ @@ -144,15 +142,14 @@ static struct rs_control *rs_decoder; /* * hardware specific Out Of Band information */ -static struct nand_oobinfo rtc_from4_nand_oobinfo = { - .useecc = MTD_NANDECC_AUTOPLACE, +static struct nand_ecclayout rtc_from4_nand_oobinfo = { .eccbytes = 32, .eccpos = { - 0, 1, 2, 3, 4, 5, 6, 7, - 8, 9, 10, 11, 12, 13, 14, 15, - 16, 17, 18, 19, 20, 21, 22, 23, - 24, 25, 26, 27, 28, 29, 30, 31}, - .oobfree = { {32, 32} } + 0, 1, 2, 3, 4, 5, 6, 7, + 8, 9, 10, 11, 12, 13, 14, 15, + 16, 17, 18, 19, 20, 21, 22, 23, + 24, 25, 26, 27, 28, 29, 30, 31}, + .oobfree = {{32, 32}} }; /* Aargh. I missed the reversed bit order, when I @@ -162,44 +159,42 @@ static struct nand_oobinfo rtc_from4_nan * of the ecc byte which we get from the FPGA */ static uint8_t revbits[256] = { - 0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0, - 0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0, - 0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8, - 0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8, - 0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4, - 0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4, - 0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec, - 0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc, - 0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2, - 0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2, - 0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea, - 0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa, - 0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6, - 0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6, - 0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee, - 0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe, - 0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1, - 0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1, - 0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9, - 0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9, - 0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5, - 0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5, - 0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed, - 0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd, - 0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3, - 0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3, - 0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb, - 0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb, - 0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7, - 0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7, - 0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef, - 0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff, + 0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0, + 0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0, + 0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8, + 0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8, + 0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4, + 0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4, + 0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec, + 0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc, + 0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2, + 0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2, + 0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea, + 0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa, + 0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6, + 0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6, + 0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee, + 0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe, + 0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1, + 0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1, + 0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9, + 0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9, + 0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5, + 0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5, + 0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed, + 0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd, + 0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3, + 0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3, + 0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb, + 0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb, + 0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7, + 0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7, + 0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef, + 0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff, }; #endif - - /* * rtc_from4_hwcontrol - hardware specific access to control-lines * @mtd: MTD device structure @@ -212,35 +207,20 @@ static uint8_t revbits[256] = { * Address lines (A24-A22), so no action is required here. * */ -static void rtc_from4_hwcontrol(struct mtd_info *mtd, int cmd) +static void rtc_from4_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int ctrl) { - struct nand_chip* this = (struct nand_chip *) (mtd->priv); - - switch(cmd) { - - case NAND_CTL_SETCLE: - this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W | RTC_FROM4_CLE); - break; - case NAND_CTL_CLRCLE: - this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W & ~RTC_FROM4_CLE); - break; - - case NAND_CTL_SETALE: - this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W | RTC_FROM4_ALE); - break; - case NAND_CTL_CLRALE: - this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W & ~RTC_FROM4_ALE); - break; + struct nand_chip *chip = (mtd->priv); - case NAND_CTL_SETNCE: - break; - case NAND_CTL_CLRNCE: - break; + if (cmd == NAND_CMD_NONE) + return; - } + if (ctrl & NAND_CLE) + writeb(cmd, chip->IO_ADDR_W | RTC_FROM4_CLE); + else + writeb(cmd, chip->IO_ADDR_W | RTC_FROM4_ALE); } - /* * rtc_from4_nand_select_chip - hardware specific chip select * @mtd: MTD device structure @@ -252,26 +232,25 @@ static void rtc_from4_hwcontrol(struct m */ static void rtc_from4_nand_select_chip(struct mtd_info *mtd, int chip) { - struct nand_chip *this = mtd->priv; + struct nand_chip *this = mtd->priv; this->IO_ADDR_R = (void __iomem *)((unsigned long)this->IO_ADDR_R & ~RTC_FROM4_NAND_ADDR_MASK); this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W & ~RTC_FROM4_NAND_ADDR_MASK); - switch(chip) { + switch (chip) { - case 0: /* select slot 3 chip */ + case 0: /* select slot 3 chip */ this->IO_ADDR_R = (void __iomem *)((unsigned long)this->IO_ADDR_R | RTC_FROM4_NAND_ADDR_SLOT3); this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W | RTC_FROM4_NAND_ADDR_SLOT3); - break; - case 1: /* select slot 4 chip */ + break; + case 1: /* select slot 4 chip */ this->IO_ADDR_R = (void __iomem *)((unsigned long)this->IO_ADDR_R | RTC_FROM4_NAND_ADDR_SLOT4); this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W | RTC_FROM4_NAND_ADDR_SLOT4); - break; + break; - } + } } - /* * rtc_from4_nand_device_ready - hardware specific ready/busy check * @mtd: MTD device structure @@ -290,7 +269,6 @@ static int rtc_from4_nand_device_ready(s } - /* * deplete - code to perform device recovery in case there was a power loss * @mtd: MTD device structure @@ -306,24 +284,23 @@ static int rtc_from4_nand_device_ready(s */ static void deplete(struct mtd_info *mtd, int chip) { - struct nand_chip *this = mtd->priv; + struct nand_chip *this = mtd->priv; - /* wait until device is ready */ - while (!this->dev_ready(mtd)); + /* wait until device is ready */ + while (!this->dev_ready(mtd)) ; this->select_chip(mtd, chip); /* Send the commands for device recovery, phase 1 */ - this->cmdfunc (mtd, NAND_CMD_DEPLETE1, 0x0000, 0x0000); - this->cmdfunc (mtd, NAND_CMD_DEPLETE2, -1, -1); + this->cmdfunc(mtd, NAND_CMD_DEPLETE1, 0x0000, 0x0000); + this->cmdfunc(mtd, NAND_CMD_DEPLETE2, -1, -1); /* Send the commands for device recovery, phase 2 */ - this->cmdfunc (mtd, NAND_CMD_DEPLETE1, 0x0000, 0x0004); - this->cmdfunc (mtd, NAND_CMD_DEPLETE2, -1, -1); + this->cmdfunc(mtd, NAND_CMD_DEPLETE1, 0x0000, 0x0004); + this->cmdfunc(mtd, NAND_CMD_DEPLETE2, -1, -1); } - #ifdef RTC_FROM4_HWECC /* * rtc_from4_enable_hwecc - hardware specific hardware ECC enable function @@ -335,39 +312,35 @@ static void deplete(struct mtd_info *mtd */ static void rtc_from4_enable_hwecc(struct mtd_info *mtd, int mode) { - volatile unsigned short * rs_ecc_ctl = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC_CTL); + volatile unsigned short *rs_ecc_ctl = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC_CTL); unsigned short status; switch (mode) { - case NAND_ECC_READ : - status = RTC_FROM4_RS_ECC_CTL_CLR - | RTC_FROM4_RS_ECC_CTL_FD_E; + case NAND_ECC_READ: + status = RTC_FROM4_RS_ECC_CTL_CLR | RTC_FROM4_RS_ECC_CTL_FD_E; *rs_ecc_ctl = status; break; - case NAND_ECC_READSYN : - status = 0x00; + case NAND_ECC_READSYN: + status = 0x00; *rs_ecc_ctl = status; break; - case NAND_ECC_WRITE : - status = RTC_FROM4_RS_ECC_CTL_CLR - | RTC_FROM4_RS_ECC_CTL_GEN - | RTC_FROM4_RS_ECC_CTL_FD_E; + case NAND_ECC_WRITE: + status = RTC_FROM4_RS_ECC_CTL_CLR | RTC_FROM4_RS_ECC_CTL_GEN | RTC_FROM4_RS_ECC_CTL_FD_E; *rs_ecc_ctl = status; break; - default: + default: BUG(); break; } } - /* * rtc_from4_calculate_ecc - hardware specific code to read ECC code * @mtd: MTD device structure @@ -383,7 +356,7 @@ static void rtc_from4_enable_hwecc(struc */ static void rtc_from4_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) { - volatile unsigned short * rs_eccn = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECCN); + volatile unsigned short *rs_eccn = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECCN); unsigned short value; int i; @@ -395,7 +368,6 @@ static void rtc_from4_calculate_ecc(stru ecc_code[7] |= 0x0f; /* set the last four bits (not used) */ } - /* * rtc_from4_correct_data - hardware specific code to correct data using ECC code * @mtd: MTD device structure @@ -414,7 +386,7 @@ static int rtc_from4_correct_data(struct unsigned short status; uint16_t par[6], syn[6]; uint8_t ecc[8]; - volatile unsigned short *rs_ecc; + volatile unsigned short *rs_ecc; status = *((volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC_CHK)); @@ -424,23 +396,18 @@ static int rtc_from4_correct_data(struct /* Read the syndrom pattern from the FPGA and correct the bitorder */ rs_ecc = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC); - for (i = 0; i < 8; i++) { - ecc[i] = revbits[(*rs_ecc) & 0xFF]; - rs_ecc++; - } + for (i = 0; i < 8; i++) { + ecc[i] = revbits[(*rs_ecc) & 0xFF]; + rs_ecc++; + } /* convert into 6 10bit syndrome fields */ - par[5] = rs_decoder->index_of[(((uint16_t)ecc[0] >> 0) & 0x0ff) | - (((uint16_t)ecc[1] << 8) & 0x300)]; - par[4] = rs_decoder->index_of[(((uint16_t)ecc[1] >> 2) & 0x03f) | - (((uint16_t)ecc[2] << 6) & 0x3c0)]; - par[3] = rs_decoder->index_of[(((uint16_t)ecc[2] >> 4) & 0x00f) | - (((uint16_t)ecc[3] << 4) & 0x3f0)]; - par[2] = rs_decoder->index_of[(((uint16_t)ecc[3] >> 6) & 0x003) | - (((uint16_t)ecc[4] << 2) & 0x3fc)]; - par[1] = rs_decoder->index_of[(((uint16_t)ecc[5] >> 0) & 0x0ff) | - (((uint16_t)ecc[6] << 8) & 0x300)]; - par[0] = (((uint16_t)ecc[6] >> 2) & 0x03f) | (((uint16_t)ecc[7] << 6) & 0x3c0); + par[5] = rs_decoder->index_of[(((uint16_t) ecc[0] >> 0) & 0x0ff) | (((uint16_t) ecc[1] << 8) & 0x300)]; + par[4] = rs_decoder->index_of[(((uint16_t) ecc[1] >> 2) & 0x03f) | (((uint16_t) ecc[2] << 6) & 0x3c0)]; + par[3] = rs_decoder->index_of[(((uint16_t) ecc[2] >> 4) & 0x00f) | (((uint16_t) ecc[3] << 4) & 0x3f0)]; + par[2] = rs_decoder->index_of[(((uint16_t) ecc[3] >> 6) & 0x003) | (((uint16_t) ecc[4] << 2) & 0x3fc)]; + par[1] = rs_decoder->index_of[(((uint16_t) ecc[5] >> 0) & 0x0ff) | (((uint16_t) ecc[6] << 8) & 0x300)]; + par[0] = (((uint16_t) ecc[6] >> 2) & 0x03f) | (((uint16_t) ecc[7] << 6) & 0x3c0); /* Convert to computable syndrome */ for (i = 0; i < 6; i++) { @@ -453,16 +420,14 @@ static int rtc_from4_correct_data(struct syn[i] = rs_decoder->index_of[syn[i]]; } - /* Let the library code do its magic.*/ - res = decode_rs8(rs_decoder, (uint8_t *)buf, par, 512, syn, 0, NULL, 0xff, NULL); + /* Let the library code do its magic. */ + res = decode_rs8(rs_decoder, (uint8_t *) buf, par, 512, syn, 0, NULL, 0xff, NULL); if (res > 0) { - DEBUG (MTD_DEBUG_LEVEL0, "rtc_from4_correct_data: " - "ECC corrected %d errors on read\n", res); + DEBUG(MTD_DEBUG_LEVEL0, "rtc_from4_correct_data: " "ECC corrected %d errors on read\n", res); } return res; } - /** * rtc_from4_errstat - perform additional error status checks * @mtd: MTD device structure @@ -478,54 +443,66 @@ static int rtc_from4_correct_data(struct * note: see pages 34..37 of data sheet for details. * */ -static int rtc_from4_errstat(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page) +static int rtc_from4_errstat(struct mtd_info *mtd, struct nand_chip *this, + int state, int status, int page) { - int er_stat=0; - int rtn, retlen; - size_t len; + int er_stat = 0; + int rtn, retlen; + size_t len; uint8_t *buf; - int i; + int i; - this->cmdfunc (mtd, NAND_CMD_STATUS_CLEAR, -1, -1); + this->cmdfunc(mtd, NAND_CMD_STATUS_CLEAR, -1, -1); - if (state == FL_ERASING) { - for (i=0; i<4; i++) { - if (status & 1<<(i+1)) { - this->cmdfunc (mtd, (NAND_CMD_STATUS_ERROR + i + 1), -1, -1); - rtn = this->read_byte(mtd); - this->cmdfunc (mtd, NAND_CMD_STATUS_RESET, -1, -1); - if (!(rtn & ERR_STAT_ECC_AVAILABLE)) { - er_stat |= 1<<(i+1); /* err_ecc_not_avail */ - } - } + if (state == FL_ERASING) { + + for (i = 0; i < 4; i++) { + if (!(status & 1 << (i + 1))) + continue; + this->cmdfunc(mtd, (NAND_CMD_STATUS_ERROR + i + 1), + -1, -1); + rtn = this->read_byte(mtd); + this->cmdfunc(mtd, NAND_CMD_STATUS_RESET, -1, -1); + + /* err_ecc_not_avail */ + if (!(rtn & ERR_STAT_ECC_AVAILABLE)) + er_stat |= 1 << (i + 1); } + } else if (state == FL_WRITING) { + + unsigned long corrected = mtd->ecc_stats.corrected; + /* single bank write logic */ - this->cmdfunc (mtd, NAND_CMD_STATUS_ERROR, -1, -1); + this->cmdfunc(mtd, NAND_CMD_STATUS_ERROR, -1, -1); rtn = this->read_byte(mtd); - this->cmdfunc (mtd, NAND_CMD_STATUS_RESET, -1, -1); + this->cmdfunc(mtd, NAND_CMD_STATUS_RESET, -1, -1); + if (!(rtn & ERR_STAT_ECC_AVAILABLE)) { - er_stat |= 1<<1; /* err_ecc_not_avail */ - } else { - len = mtd->oobblock; - buf = kmalloc (len, GFP_KERNEL); - if (!buf) { - printk (KERN_ERR "rtc_from4_errstat: Out of memory!\n"); - er_stat = 1; /* if we can't check, assume failed */ - } else { - /* recovery read */ - /* page read */ - rtn = nand_do_read_ecc (mtd, page, len, &retlen, buf, NULL, this->autooob, 1); - if (rtn) { /* if read failed or > 1-bit error corrected */ - er_stat |= 1<<1; /* ECC read failed */ - } - kfree(buf); - } + /* err_ecc_not_avail */ + er_stat |= 1 << 1; + goto out; } + + len = mtd->writesize; + buf = kmalloc(len, GFP_KERNEL); + if (!buf) { + printk(KERN_ERR "rtc_from4_errstat: Out of memory!\n"); + er_stat = 1; + goto out; + } + + /* recovery read */ + rtn = nand_do_read(mtd, page, len, &retlen, buf); + + /* if read failed or > 1-bit error corrected */ + if (rtn || (mtd->ecc_stats.corrected - corrected) > 1) { + er_stat |= 1 << 1; + kfree(buf); } rtn = status; - if (er_stat == 0) { /* if ECC is available */ + if (er_stat == 0) { /* if ECC is available */ rtn = (status & ~NAND_STATUS_FAIL); /* clear the error bit */ } @@ -533,33 +510,32 @@ static int rtc_from4_errstat(struct mtd_ } #endif - /* * Main initialization routine */ -int __init rtc_from4_init (void) +static int __init rtc_from4_init(void) { struct nand_chip *this; unsigned short bcr1, bcr2, wcr2; int i; /* Allocate memory for MTD device structure and private data */ - rtc_from4_mtd = kmalloc(sizeof(struct mtd_info) + sizeof (struct nand_chip), - GFP_KERNEL); + rtc_from4_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); if (!rtc_from4_mtd) { - printk ("Unable to allocate Renesas NAND MTD device structure.\n"); + printk("Unable to allocate Renesas NAND MTD device structure.\n"); return -ENOMEM; } /* Get pointer to private data */ - this = (struct nand_chip *) (&rtc_from4_mtd[1]); + this = (struct nand_chip *)(&rtc_from4_mtd[1]); /* Initialize structures */ - memset((char *) rtc_from4_mtd, 0, sizeof(struct mtd_info)); - memset((char *) this, 0, sizeof(struct nand_chip)); + memset(rtc_from4_mtd, 0, sizeof(struct mtd_info)); + memset(this, 0, sizeof(struct nand_chip)); /* Link the private data with the MTD structure */ rtc_from4_mtd->priv = this; + rtc_from4_mtd->owner = THIS_MODULE; /* set area 5 as PCMCIA mode to clear the spec of tDH(Data hold time;9ns min) */ bcr1 = *SH77X9_BCR1 & ~0x0002; @@ -580,9 +556,9 @@ int __init rtc_from4_init (void) this->IO_ADDR_R = rtc_from4_fio_base; this->IO_ADDR_W = rtc_from4_fio_base; /* Set address of hardware control function */ - this->hwcontrol = rtc_from4_hwcontrol; + this->cmd_ctrl = rtc_from4_hwcontrol; /* Set address of chip select function */ - this->select_chip = rtc_from4_nand_select_chip; + this->select_chip = rtc_from4_nand_select_chip; /* command delay time (in us) */ this->chip_delay = 100; /* return the status of the Ready/Busy line */ @@ -591,19 +567,20 @@ int __init rtc_from4_init (void) #ifdef RTC_FROM4_HWECC printk(KERN_INFO "rtc_from4_init: using hardware ECC detection.\n"); - this->eccmode = NAND_ECC_HW8_512; - this->options |= NAND_HWECC_SYNDROME; + this->ecc.mode = NAND_ECC_HW_SYNDROME; + this->ecc.size = 512; + this->ecc.bytes = 8; /* return the status of extra status and ECC checks */ this->errstat = rtc_from4_errstat; /* set the nand_oobinfo to support FPGA H/W error detection */ - this->autooob = &rtc_from4_nand_oobinfo; - this->enable_hwecc = rtc_from4_enable_hwecc; - this->calculate_ecc = rtc_from4_calculate_ecc; - this->correct_data = rtc_from4_correct_data; + this->ecc.layout = &rtc_from4_nand_oobinfo; + this->ecc.hwctl = rtc_from4_enable_hwecc; + this->ecc.calculate = rtc_from4_calculate_ecc; + this->ecc.correct = rtc_from4_correct_data; #else printk(KERN_INFO "rtc_from4_init: using software ECC detection.\n"); - this->eccmode = NAND_ECC_SOFT; + this->ecc.mode = NAND_ECC_SOFT; #endif /* set the bad block tables to support debugging */ @@ -617,7 +594,7 @@ int __init rtc_from4_init (void) } /* Perform 'device recovery' for each chip in case there was a power loss. */ - for (i=0; i < this->numchips; i++) { + for (i = 0; i < this->numchips; i++) { deplete(rtc_from4_mtd, i); } @@ -643,7 +620,7 @@ int __init rtc_from4_init (void) */ rs_decoder = init_rs(10, 0x409, 0, 1, 6); if (!rs_decoder) { - printk (KERN_ERR "Could not create a RS decoder\n"); + printk(KERN_ERR "Could not create a RS decoder\n"); nand_release(rtc_from4_mtd); kfree(rtc_from4_mtd); return -ENOMEM; @@ -652,20 +629,19 @@ int __init rtc_from4_init (void) /* Return happy */ return 0; } -module_init(rtc_from4_init); +module_init(rtc_from4_init); /* * Clean up routine */ -#ifdef MODULE -static void __exit rtc_from4_cleanup (void) +static void __exit rtc_from4_cleanup(void) { /* Release resource, unregister partitions */ nand_release(rtc_from4_mtd); /* Free the MTD device structure */ - kfree (rtc_from4_mtd); + kfree(rtc_from4_mtd); #ifdef RTC_FROM4_HWECC /* Free the reed solomon resources */ @@ -674,10 +650,9 @@ static void __exit rtc_from4_cleanup (vo } #endif } + module_exit(rtc_from4_cleanup); -#endif MODULE_LICENSE("GPL"); MODULE_AUTHOR("d.marlin max) { - printk("%d ns is too big for current clock rate %ld\n", - wanted, clk); + printk("%d ns is too big for current clock rate %ld\n", wanted, clk); return -1; } @@ -164,8 +162,7 @@ static int s3c2410_nand_calc_rate(int wa /* controller setup */ -static int s3c2410_nand_inithw(struct s3c2410_nand_info *info, - struct platform_device *pdev) +static int s3c2410_nand_inithw(struct s3c2410_nand_info *info, struct platform_device *pdev) { struct s3c2410_platform_nand *plat = to_nand_plat(pdev); unsigned long clkrate = clk_get_rate(info->clk); @@ -177,7 +174,7 @@ static int s3c2410_nand_inithw(struct s3 clkrate /= 1000; /* turn clock into kHz for ease of use */ if (plat != NULL) { - tacls = s3c2410_nand_calc_rate(plat->tacls, clkrate, 4); + tacls = s3c2410_nand_calc_rate(plat->tacls, clkrate, 4); twrph0 = s3c2410_nand_calc_rate(plat->twrph0, clkrate, 8); twrph1 = s3c2410_nand_calc_rate(plat->twrph1, clkrate, 8); } else { @@ -193,19 +190,17 @@ static int s3c2410_nand_inithw(struct s3 } printk(KERN_INFO PFX "Tacls=%d, %dns Twrph0=%d %dns, Twrph1=%d %dns\n", - tacls, to_ns(tacls, clkrate), - twrph0, to_ns(twrph0, clkrate), - twrph1, to_ns(twrph1, clkrate)); + tacls, to_ns(tacls, clkrate), twrph0, to_ns(twrph0, clkrate), twrph1, to_ns(twrph1, clkrate)); if (!info->is_s3c2440) { - cfg = S3C2410_NFCONF_EN; - cfg |= S3C2410_NFCONF_TACLS(tacls-1); - cfg |= S3C2410_NFCONF_TWRPH0(twrph0-1); - cfg |= S3C2410_NFCONF_TWRPH1(twrph1-1); + cfg = S3C2410_NFCONF_EN; + cfg |= S3C2410_NFCONF_TACLS(tacls - 1); + cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1); + cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1); } else { - cfg = S3C2440_NFCONF_TACLS(tacls-1); - cfg |= S3C2440_NFCONF_TWRPH0(twrph0-1); - cfg |= S3C2440_NFCONF_TWRPH1(twrph1-1); + cfg = S3C2440_NFCONF_TACLS(tacls - 1); + cfg |= S3C2440_NFCONF_TWRPH0(twrph0 - 1); + cfg |= S3C2440_NFCONF_TWRPH1(twrph1 - 1); } pr_debug(PFX "NF_CONF is 0x%lx\n", cfg); @@ -229,7 +224,7 @@ static void s3c2410_nand_select_chip(str info = nmtd->info; bit = (info->is_s3c2440) ? S3C2440_NFCONT_nFCE : S3C2410_NFCONF_nFCE; - reg = info->regs+((info->is_s3c2440) ? S3C2440_NFCONT:S3C2410_NFCONF); + reg = info->regs + ((info->is_s3c2440) ? S3C2440_NFCONT : S3C2410_NFCONF); cur = readl(reg); @@ -243,7 +238,7 @@ static void s3c2410_nand_select_chip(str if (info->platform != NULL) { if (info->platform->select_chip != NULL) - (info->platform->select_chip)(nmtd->set, chip); + (info->platform->select_chip) (nmtd->set, chip); } cur &= ~bit; @@ -260,60 +255,36 @@ static void s3c2410_nand_select_chip(str * */ -static void s3c2410_nand_hwcontrol(struct mtd_info *mtd, int cmd) +static void s3c2410_nand_hwcontrol(struct mtd_info *mtd, int cmd, + unsigend int ctrl) { struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); struct nand_chip *chip = mtd->priv; - switch (cmd) { - case NAND_CTL_SETNCE: - case NAND_CTL_CLRNCE: - printk(KERN_ERR "%s: called for NCE\n", __FUNCTION__); - break; - - case NAND_CTL_SETCLE: - chip->IO_ADDR_W = info->regs + S3C2410_NFCMD; - break; - - case NAND_CTL_SETALE: - chip->IO_ADDR_W = info->regs + S3C2410_NFADDR; - break; - - /* NAND_CTL_CLRCLE: */ - /* NAND_CTL_CLRALE: */ - default: - chip->IO_ADDR_W = info->regs + S3C2410_NFDATA; - break; - } + if (cmd == NAND_CMD_NONE) + return; + + if (cmd & NAND_CLE) + writeb(cmd, info->regs + S3C2410_NFCMD); + else + writeb(cmd, info->regs + S3C2410_NFADDR); } /* command and control functions */ -static void s3c2440_nand_hwcontrol(struct mtd_info *mtd, int cmd) +static void s3c2410_nand_hwcontrol(struct mtd_info *mtd, int cmd, + unsigend int ctrl) { struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); struct nand_chip *chip = mtd->priv; - switch (cmd) { - case NAND_CTL_SETNCE: - case NAND_CTL_CLRNCE: - printk(KERN_ERR "%s: called for NCE\n", __FUNCTION__); - break; - - case NAND_CTL_SETCLE: - chip->IO_ADDR_W = info->regs + S3C2440_NFCMD; - break; - - case NAND_CTL_SETALE: - chip->IO_ADDR_W = info->regs + S3C2440_NFADDR; - break; - - /* NAND_CTL_CLRCLE: */ - /* NAND_CTL_CLRALE: */ - default: - chip->IO_ADDR_W = info->regs + S3C2440_NFDATA; - break; - } + if (cmd == NAND_CMD_NONE) + return; + + if (cmd & NAND_CLE) + writeb(cmd, info->regs + S3C2440_NFCMD); + else + writeb(cmd, info->regs + S3C2440_NFADDR); } /* s3c2410_nand_devready() @@ -330,22 +301,16 @@ static int s3c2410_nand_devready(struct return readb(info->regs + S3C2410_NFSTAT) & S3C2410_NFSTAT_BUSY; } - /* ECC handling functions */ -static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat, - u_char *read_ecc, u_char *calc_ecc) +static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc) { - pr_debug("s3c2410_nand_correct_data(%p,%p,%p,%p)\n", - mtd, dat, read_ecc, calc_ecc); + pr_debug("s3c2410_nand_correct_data(%p,%p,%p,%p)\n", mtd, dat, read_ecc, calc_ecc); pr_debug("eccs: read %02x,%02x,%02x vs calc %02x,%02x,%02x\n", - read_ecc[0], read_ecc[1], read_ecc[2], - calc_ecc[0], calc_ecc[1], calc_ecc[2]); + read_ecc[0], read_ecc[1], read_ecc[2], calc_ecc[0], calc_ecc[1], calc_ecc[2]); - if (read_ecc[0] == calc_ecc[0] && - read_ecc[1] == calc_ecc[1] && - read_ecc[2] == calc_ecc[2]) + if (read_ecc[0] == calc_ecc[0] && read_ecc[1] == calc_ecc[1] && read_ecc[2] == calc_ecc[2]) return 0; /* we curently have no method for correcting the error */ @@ -378,8 +343,7 @@ static void s3c2440_nand_enable_hwecc(st writel(ctrl | S3C2440_NFCONT_INITECC, info->regs + S3C2440_NFCONT); } -static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, - const u_char *dat, u_char *ecc_code) +static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) { struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); @@ -387,15 +351,12 @@ static int s3c2410_nand_calculate_ecc(st ecc_code[1] = readb(info->regs + S3C2410_NFECC + 1); ecc_code[2] = readb(info->regs + S3C2410_NFECC + 2); - pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n", - ecc_code[0], ecc_code[1], ecc_code[2]); + pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n", ecc_code[0], ecc_code[1], ecc_code[2]); return 0; } - -static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd, - const u_char *dat, u_char *ecc_code) +static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) { struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); unsigned long ecc = readl(info->regs + S3C2440_NFMECC0); @@ -404,13 +365,11 @@ static int s3c2440_nand_calculate_ecc(st ecc_code[1] = ecc >> 8; ecc_code[2] = ecc >> 16; - pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n", - ecc_code[0], ecc_code[1], ecc_code[2]); + pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n", ecc_code[0], ecc_code[1], ecc_code[2]); return 0; } - /* over-ride the standard functions for a little more speed. We can * use read/write block to move the data buffers to/from the controller */ @@ -421,8 +380,7 @@ static void s3c2410_nand_read_buf(struct readsb(this->IO_ADDR_R, buf, len); } -static void s3c2410_nand_write_buf(struct mtd_info *mtd, - const u_char *buf, int len) +static void s3c2410_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) { struct nand_chip *this = mtd->priv; writesb(this->IO_ADDR_W, buf, len); @@ -488,9 +446,7 @@ static int s3c2410_nand_add_partition(st return add_mtd_device(&mtd->mtd); if (set->nr_partitions > 0 && set->partitions != NULL) { - return add_mtd_partitions(&mtd->mtd, - set->partitions, - set->nr_partitions); + return add_mtd_partitions(&mtd->mtd, set->partitions, set->nr_partitions); } return add_mtd_device(&mtd->mtd); @@ -517,7 +473,7 @@ static void s3c2410_nand_init_chip(struc chip->IO_ADDR_R = info->regs + S3C2410_NFDATA; chip->IO_ADDR_W = info->regs + S3C2410_NFDATA; - chip->hwcontrol = s3c2410_nand_hwcontrol; + chip->cmd_ctrl = s3c2410_nand_hwcontrol; chip->dev_ready = s3c2410_nand_devready; chip->write_buf = s3c2410_nand_write_buf; chip->read_buf = s3c2410_nand_read_buf; @@ -530,26 +486,29 @@ static void s3c2410_nand_init_chip(struc if (info->is_s3c2440) { chip->IO_ADDR_R = info->regs + S3C2440_NFDATA; chip->IO_ADDR_W = info->regs + S3C2440_NFDATA; - chip->hwcontrol = s3c2440_nand_hwcontrol; + chip->cmd_ctrl = s3c2440_nand_hwcontrol; } nmtd->info = info; nmtd->mtd.priv = chip; + nmtd->mtd.owner = THIS_MODULE; nmtd->set = set; if (hardware_ecc) { - chip->correct_data = s3c2410_nand_correct_data; - chip->enable_hwecc = s3c2410_nand_enable_hwecc; - chip->calculate_ecc = s3c2410_nand_calculate_ecc; - chip->eccmode = NAND_ECC_HW3_512; - chip->autooob = &nand_hw_eccoob; + chip->ecc.correct = s3c2410_nand_correct_data; + chip->ecc.hwctl = s3c2410_nand_enable_hwecc; + chip->ecc.calculate = s3c2410_nand_calculate_ecc; + chip->ecc.mode = NAND_ECC_HW; + chip->ecc.size = 512; + chip->ecc.bytes = 3; + chip->ecc.layout = &nand_hw_eccoob; if (info->is_s3c2440) { - chip->enable_hwecc = s3c2440_nand_enable_hwecc; - chip->calculate_ecc = s3c2440_nand_calculate_ecc; + chip->ecc.hwctl = s3c2440_nand_enable_hwecc; + chip->ecc.calculate = s3c2440_nand_calculate_ecc; } } else { - chip->eccmode = NAND_ECC_SOFT; + chip->ecc.mode = NAND_ECC_SOFT; } } @@ -654,13 +613,11 @@ static int s3c24xx_nand_probe(struct pla nmtd = info->mtds; for (setno = 0; setno < nr_sets; setno++, nmtd++) { - pr_debug("initialising set %d (%p, info %p)\n", - setno, nmtd, info); + pr_debug("initialising set %d (%p, info %p)\n", setno, nmtd, info); s3c2410_nand_init_chip(info, nmtd, sets); - nmtd->scan_res = nand_scan(&nmtd->mtd, - (sets) ? sets->nr_chips : 1); + nmtd->scan_res = nand_scan(&nmtd->mtd, (sets) ? sets->nr_chips : 1); if (nmtd->scan_res == 0) { s3c2410_nand_add_partition(info, nmtd, sets); diff -puN drivers/mtd/nand/sharpsl.c~git-mtd drivers/mtd/nand/sharpsl.c --- devel/drivers/mtd/nand/sharpsl.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/nand/sharpsl.c 2006-05-29 15:02:34.000000000 -0700 @@ -46,7 +46,6 @@ static int sharpsl_phys_base = 0x0C00000 #define FLCLE (1 << 1) #define FLCE0 (1 << 0) - /* * MTD structure for SharpSL */ @@ -60,50 +59,44 @@ static struct mtd_info *sharpsl_mtd = NU static int nr_partitions; static struct mtd_partition sharpsl_nand_default_partition_info[] = { { - .name = "System Area", - .offset = 0, - .size = 7 * 1024 * 1024, - }, + .name = "System Area", + .offset = 0, + .size = 7 * 1024 * 1024, + }, { - .name = "Root Filesystem", - .offset = 7 * 1024 * 1024, - .size = 30 * 1024 * 1024, - }, + .name = "Root Filesystem", + .offset = 7 * 1024 * 1024, + .size = 30 * 1024 * 1024, + }, { - .name = "Home Filesystem", - .offset = MTDPART_OFS_APPEND , - .size = MTDPART_SIZ_FULL , - }, + .name = "Home Filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, }; /* * hardware specific access to control-lines + * ctrl: + * NAND_CNE: bit 0 -> bit 0 & 4 + * NAND_CLE: bit 1 -> bit 1 + * NAND_ALE: bit 2 -> bit 2 + * */ -static void -sharpsl_nand_hwcontrol(struct mtd_info* mtd, int cmd) +static void sharpsl_nand_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int ctrl) { - switch (cmd) { - case NAND_CTL_SETCLE: - writeb(readb(FLASHCTL) | FLCLE, FLASHCTL); - break; - case NAND_CTL_CLRCLE: - writeb(readb(FLASHCTL) & ~FLCLE, FLASHCTL); - break; - - case NAND_CTL_SETALE: - writeb(readb(FLASHCTL) | FLALE, FLASHCTL); - break; - case NAND_CTL_CLRALE: - writeb(readb(FLASHCTL) & ~FLALE, FLASHCTL); - break; - - case NAND_CTL_SETNCE: - writeb(readb(FLASHCTL) & ~(FLCE0|FLCE1), FLASHCTL); - break; - case NAND_CTL_CLRNCE: - writeb(readb(FLASHCTL) | (FLCE0|FLCE1), FLASHCTL); - break; + struct nand_chip *chip = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + unsigned char bits = ctrl & 0x07; + + bits |= (ctrl & 0x01) << 4; + writeb((readb(FLASHCTL) & 0x17) | bits, FLASHCTL); } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, chip->IO_ADDR_W); } static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; @@ -122,31 +115,26 @@ static struct nand_bbt_descr sharpsl_aki .pattern = scan_ff_pattern }; -static struct nand_oobinfo akita_oobinfo = { - .useecc = MTD_NANDECC_AUTOPLACE, +static struct nand_ecclayout akita_oobinfo = { .eccbytes = 24, .eccpos = { - 0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11, - 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23, - 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37}, - .oobfree = { {0x08, 0x09} } + 0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11, + 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23, + 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37}, + .oobfree = {{0x08, 0x09}} }; -static int -sharpsl_nand_dev_ready(struct mtd_info* mtd) +static int sharpsl_nand_dev_ready(struct mtd_info *mtd) { return !((readb(FLASHCTL) & FLRYBY) == 0); } -static void -sharpsl_nand_enable_hwecc(struct mtd_info* mtd, int mode) +static void sharpsl_nand_enable_hwecc(struct mtd_info *mtd, int mode) { - writeb(0 ,ECCCLRR); + writeb(0, ECCCLRR); } -static int -sharpsl_nand_calculate_ecc(struct mtd_info* mtd, const u_char* dat, - u_char* ecc_code) +static int sharpsl_nand_calculate_ecc(struct mtd_info *mtd, const u_char * dat, u_char * ecc_code) { ecc_code[0] = ~readb(ECCLPUB); ecc_code[1] = ~readb(ECCLPLB); @@ -154,47 +142,44 @@ sharpsl_nand_calculate_ecc(struct mtd_in return readb(ECCCNTR) != 0; } - #ifdef CONFIG_MTD_PARTITIONS const char *part_probes[] = { "cmdlinepart", NULL }; #endif - /* * Main initialization routine */ -int __init -sharpsl_nand_init(void) +static int __init sharpsl_nand_init(void) { struct nand_chip *this; - struct mtd_partition* sharpsl_partition_info; + struct mtd_partition *sharpsl_partition_info; int err = 0; /* Allocate memory for MTD device structure and private data */ - sharpsl_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), - GFP_KERNEL); + sharpsl_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); if (!sharpsl_mtd) { - printk ("Unable to allocate SharpSL NAND MTD device structure.\n"); + printk("Unable to allocate SharpSL NAND MTD device structure.\n"); return -ENOMEM; } /* map physical adress */ sharpsl_io_base = ioremap(sharpsl_phys_base, 0x1000); - if(!sharpsl_io_base){ + if (!sharpsl_io_base) { printk("ioremap to access Sharp SL NAND chip failed\n"); kfree(sharpsl_mtd); return -EIO; } /* Get pointer to private data */ - this = (struct nand_chip *) (&sharpsl_mtd[1]); + this = (struct nand_chip *)(&sharpsl_mtd[1]); /* Initialize structures */ - memset((char *) sharpsl_mtd, 0, sizeof(struct mtd_info)); - memset((char *) this, 0, sizeof(struct nand_chip)); + memset(sharpsl_mtd, 0, sizeof(struct mtd_info)); + memset(this, 0, sizeof(struct nand_chip)); /* Link the private data with the MTD structure */ sharpsl_mtd->priv = this; + sharpsl_mtd->owner = THIS_MODULE; /* * PXA initialize @@ -205,23 +190,25 @@ sharpsl_nand_init(void) this->IO_ADDR_R = FLASHIO; this->IO_ADDR_W = FLASHIO; /* Set address of hardware control function */ - this->hwcontrol = sharpsl_nand_hwcontrol; + this->cmd_ctrl = sharpsl_nand_hwcontrol; this->dev_ready = sharpsl_nand_dev_ready; /* 15 us command delay time */ this->chip_delay = 15; /* set eccmode using hardware ECC */ - this->eccmode = NAND_ECC_HW3_256; + this->ecc.mode = NAND_ECC_HW; + this->ecc.size = 256; + this->ecc.bytes = 3; this->badblock_pattern = &sharpsl_bbt; if (machine_is_akita() || machine_is_borzoi()) { this->badblock_pattern = &sharpsl_akita_bbt; - this->autooob = &akita_oobinfo; + this->ecc.layout = &akita_oobinfo; } - this->enable_hwecc = sharpsl_nand_enable_hwecc; - this->calculate_ecc = sharpsl_nand_calculate_ecc; - this->correct_data = nand_correct_data; + this->ecc.hwctl = sharpsl_nand_enable_hwecc; + this->ecc.calculate = sharpsl_nand_calculate_ecc; + this->ecc.correct = nand_correct_data; /* Scan to find existence of the device */ - err=nand_scan(sharpsl_mtd,1); + err = nand_scan(sharpsl_mtd, 1); if (err) { iounmap(sharpsl_io_base); kfree(sharpsl_mtd); @@ -230,24 +217,23 @@ sharpsl_nand_init(void) /* Register the partitions */ sharpsl_mtd->name = "sharpsl-nand"; - nr_partitions = parse_mtd_partitions(sharpsl_mtd, part_probes, - &sharpsl_partition_info, 0); + nr_partitions = parse_mtd_partitions(sharpsl_mtd, part_probes, &sharpsl_partition_info, 0); if (nr_partitions <= 0) { nr_partitions = DEFAULT_NUM_PARTITIONS; sharpsl_partition_info = sharpsl_nand_default_partition_info; if (machine_is_poodle()) { - sharpsl_partition_info[1].size=30 * 1024 * 1024; + sharpsl_partition_info[1].size = 22 * 1024 * 1024; } else if (machine_is_corgi() || machine_is_shepherd()) { - sharpsl_partition_info[1].size=25 * 1024 * 1024; + sharpsl_partition_info[1].size = 25 * 1024 * 1024; } else if (machine_is_husky()) { - sharpsl_partition_info[1].size=53 * 1024 * 1024; + sharpsl_partition_info[1].size = 53 * 1024 * 1024; } else if (machine_is_spitz()) { - sharpsl_partition_info[1].size=5 * 1024 * 1024; + sharpsl_partition_info[1].size = 5 * 1024 * 1024; } else if (machine_is_akita()) { - sharpsl_partition_info[1].size=58 * 1024 * 1024; + sharpsl_partition_info[1].size = 58 * 1024 * 1024; } else if (machine_is_borzoi()) { - sharpsl_partition_info[1].size=32 * 1024 * 1024; + sharpsl_partition_info[1].size = 32 * 1024 * 1024; } } @@ -261,15 +247,15 @@ sharpsl_nand_init(void) /* Return happy */ return 0; } + module_init(sharpsl_nand_init); /* * Clean up routine */ -#ifdef MODULE static void __exit sharpsl_nand_cleanup(void) { - struct nand_chip *this = (struct nand_chip *) &sharpsl_mtd[1]; + struct nand_chip *this = (struct nand_chip *)&sharpsl_mtd[1]; /* Release resources, unregister device */ nand_release(sharpsl_mtd); @@ -279,8 +265,8 @@ static void __exit sharpsl_nand_cleanup( /* Free the MTD device structure */ kfree(sharpsl_mtd); } + module_exit(sharpsl_nand_cleanup); -#endif MODULE_LICENSE("GPL"); MODULE_AUTHOR("Richard Purdie "); diff -puN drivers/mtd/nand/spia.c~git-mtd drivers/mtd/nand/spia.c --- devel/drivers/mtd/nand/spia.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/nand/spia.c 2006-05-29 15:02:34.000000000 -0700 @@ -39,16 +39,16 @@ static struct mtd_info *spia_mtd = NULL; */ #define SPIA_IO_BASE 0xd0000000 /* Start of EP7212 IO address space */ #define SPIA_FIO_BASE 0xf0000000 /* Address where flash is mapped */ -#define SPIA_PEDR 0x0080 /* - * IO offset to Port E data register - * where the CLE, ALE and NCE pins - * are wired to. - */ -#define SPIA_PEDDR 0x00c0 /* - * IO offset to Port E data direction - * register so we can control the IO - * lines. - */ +#define SPIA_PEDR 0x0080 /* + * IO offset to Port E data register + * where the CLE, ALE and NCE pins + * are wired to. + */ +#define SPIA_PEDDR 0x00c0 /* + * IO offset to Port E data direction + * register so we can control the IO + * lines. + */ /* * Module stuff @@ -69,79 +69,84 @@ module_param(spia_peddr, int, 0); */ static const struct mtd_partition partition_info[] = { { - .name = "SPIA flash partition 1", - .offset = 0, - .size = 2*1024*1024 - }, + .name = "SPIA flash partition 1", + .offset = 0, + .size = 2 * 1024 * 1024}, { - .name = "SPIA flash partition 2", - .offset = 2*1024*1024, - .size = 6*1024*1024 - } + .name = "SPIA flash partition 2", + .offset = 2 * 1024 * 1024, + .size = 6 * 1024 * 1024} }; -#define NUM_PARTITIONS 2 +#define NUM_PARTITIONS 2 /* * hardware specific access to control-lines -*/ -static void spia_hwcontrol(struct mtd_info *mtd, int cmd){ - - switch(cmd){ - - case NAND_CTL_SETCLE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) |= 0x01; break; - case NAND_CTL_CLRCLE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) &= ~0x01; break; + * + * ctrl: + * NAND_CNE: bit 0 -> bit 2 + * NAND_CLE: bit 1 -> bit 0 + * NAND_ALE: bit 2 -> bit 1 + */ +static void spia_hwcontrol(struct mtd_info *mtd, int cmd) +{ + struct nand_chip *chip = mtd->priv; - case NAND_CTL_SETALE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) |= 0x02; break; - case NAND_CTL_CLRALE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) &= ~0x02; break; + if (ctrl & NAND_CTRL_CHANGE) { + void __iomem *addr = spia_io_base + spia_pedr; + unsigned char bits; + + bits = (ctrl & NAND_CNE) << 2; + bits |= (ctrl & NAND_CLE | NAND_ALE) >> 1; + writeb((readb(addr) & ~0x7) | bits, addr); + } - case NAND_CTL_SETNCE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) &= ~0x04; break; - case NAND_CTL_CLRNCE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) |= 0x04; break; - } + if (cmd != NAND_CMD_NONE) + writeb(cmd, chip->IO_ADDR_W); } /* * Main initialization routine */ -int __init spia_init (void) +static int __init spia_init(void) { struct nand_chip *this; /* Allocate memory for MTD device structure and private data */ - spia_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip), - GFP_KERNEL); + spia_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); if (!spia_mtd) { - printk ("Unable to allocate SPIA NAND MTD device structure.\n"); + printk("Unable to allocate SPIA NAND MTD device structure.\n"); return -ENOMEM; } /* Get pointer to private data */ - this = (struct nand_chip *) (&spia_mtd[1]); + this = (struct nand_chip *)(&spia_mtd[1]); /* Initialize structures */ - memset((char *) spia_mtd, 0, sizeof(struct mtd_info)); - memset((char *) this, 0, sizeof(struct nand_chip)); + memset(spia_mtd, 0, sizeof(struct mtd_info)); + memset(this, 0, sizeof(struct nand_chip)); /* Link the private data with the MTD structure */ spia_mtd->priv = this; + spia_mtd->owner = THIS_MODULE; /* * Set GPIO Port E control register so that the pins are configured * to be outputs for controlling the NAND flash. */ - (*(volatile unsigned char *) (spia_io_base + spia_peddr)) = 0x07; + (*(volatile unsigned char *)(spia_io_base + spia_peddr)) = 0x07; /* Set address of NAND IO lines */ - this->IO_ADDR_R = (void __iomem *) spia_fio_base; - this->IO_ADDR_W = (void __iomem *) spia_fio_base; + this->IO_ADDR_R = (void __iomem *)spia_fio_base; + this->IO_ADDR_W = (void __iomem *)spia_fio_base; /* Set address of hardware control function */ - this->hwcontrol = spia_hwcontrol; + this->cmd_ctrl = spia_hwcontrol; /* 15 us command delay time */ this->chip_delay = 15; /* Scan to find existence of the device */ - if (nand_scan (spia_mtd, 1)) { - kfree (spia_mtd); + if (nand_scan(spia_mtd, 1)) { + kfree(spia_mtd); return -ENXIO; } @@ -151,22 +156,22 @@ int __init spia_init (void) /* Return happy */ return 0; } + module_init(spia_init); /* * Clean up routine */ -#ifdef MODULE -static void __exit spia_cleanup (void) +static void __exit spia_cleanup(void) { /* Release resources, unregister device */ - nand_release (spia_mtd); + nand_release(spia_mtd); /* Free the MTD device structure */ - kfree (spia_mtd); + kfree(spia_mtd); } + module_exit(spia_cleanup); -#endif MODULE_LICENSE("GPL"); MODULE_AUTHOR("Steven J. Hill #include +#define CONFIG_NAND_WORKAROUND 1 + /* * MTD structure for TOTO board */ @@ -39,25 +41,6 @@ static struct mtd_info *toto_mtd = NULL; static unsigned long toto_io_base = OMAP_FLASH_1_BASE; -#define CONFIG_NAND_WORKAROUND 1 - -#define NAND_NCE 0x4000 -#define NAND_CLE 0x1000 -#define NAND_ALE 0x0002 -#define NAND_MASK (NAND_CLE | NAND_ALE | NAND_NCE) - -#define T_NAND_CTL_CLRALE(iob) gpiosetout(NAND_ALE, 0) -#define T_NAND_CTL_SETALE(iob) gpiosetout(NAND_ALE, NAND_ALE) -#ifdef CONFIG_NAND_WORKAROUND /* "some" dev boards busted, blue wired to rts2 :( */ -#define T_NAND_CTL_CLRCLE(iob) gpiosetout(NAND_CLE, 0); rts2setout(2, 2) -#define T_NAND_CTL_SETCLE(iob) gpiosetout(NAND_CLE, NAND_CLE); rts2setout(2, 0) -#else -#define T_NAND_CTL_CLRCLE(iob) gpiosetout(NAND_CLE, 0) -#define T_NAND_CTL_SETCLE(iob) gpiosetout(NAND_CLE, NAND_CLE) -#endif -#define T_NAND_CTL_SETNCE(iob) gpiosetout(NAND_NCE, 0) -#define T_NAND_CTL_CLRNCE(iob) gpiosetout(NAND_NCE, NAND_NCE) - /* * Define partitions for flash devices */ @@ -91,91 +74,110 @@ static struct mtd_partition partition_in #define NUM_PARTITIONS32M 3 #define NUM_PARTITIONS64M 4 + /* * hardware specific access to control-lines -*/ - -static void toto_hwcontrol(struct mtd_info *mtd, int cmd) + * + * ctrl: + * NAND_NCE: bit 0 -> bit 14 (0x4000) + * NAND_CLE: bit 1 -> bit 12 (0x1000) + * NAND_ALE: bit 2 -> bit 1 (0x0002) + */ +static void toto_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int ctrl) { + struct nand_chip *chip = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + unsigned long bits; - udelay(1); /* hopefully enough time for tc make proceding write to clear */ - switch(cmd){ + /* hopefully enough time for tc make proceding write to clear */ + udelay(1); - case NAND_CTL_SETCLE: T_NAND_CTL_SETCLE(cmd); break; - case NAND_CTL_CLRCLE: T_NAND_CTL_CLRCLE(cmd); break; + bits = (~ctrl & NAND_NCE) << 14; + bits |= (ctrl & NAND_CLE) << 12; + bits |= (ctrl & NAND_ALE) >> 1; - case NAND_CTL_SETALE: T_NAND_CTL_SETALE(cmd); break; - case NAND_CTL_CLRALE: T_NAND_CTL_CLRALE(cmd); break; +#warning Wild guess as gpiosetout() is nowhere defined in the kernel source - tglx + gpiosetout(0x5002, bits); - case NAND_CTL_SETNCE: T_NAND_CTL_SETNCE(cmd); break; - case NAND_CTL_CLRNCE: T_NAND_CTL_CLRNCE(cmd); break; +#ifdef CONFIG_NAND_WORKAROUND + /* "some" dev boards busted, blue wired to rts2 :( */ + rts2setout(2, (ctrl & NAND_CLE) << 1); +#endif + /* allow time to ensure gpio state to over take memory write */ + udelay(1); } - udelay(1); /* allow time to ensure gpio state to over take memory write */ + + if (cmd != NAND_CMD_NONE) + writeb(cmd, chip->IO_ADDR_W); } /* * Main initialization routine */ -int __init toto_init (void) +static int __init toto_init(void) { struct nand_chip *this; int err = 0; /* Allocate memory for MTD device structure and private data */ - toto_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip), - GFP_KERNEL); + toto_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); if (!toto_mtd) { - printk (KERN_WARNING "Unable to allocate toto NAND MTD device structure.\n"); + printk(KERN_WARNING "Unable to allocate toto NAND MTD device structure.\n"); err = -ENOMEM; goto out; } /* Get pointer to private data */ - this = (struct nand_chip *) (&toto_mtd[1]); + this = (struct nand_chip *)(&toto_mtd[1]); /* Initialize structures */ - memset((char *) toto_mtd, 0, sizeof(struct mtd_info)); - memset((char *) this, 0, sizeof(struct nand_chip)); + memset(toto_mtd, 0, sizeof(struct mtd_info)); + memset(this, 0, sizeof(struct nand_chip)); /* Link the private data with the MTD structure */ toto_mtd->priv = this; + toto_mtd->owner = THIS_MODULE; /* Set address of NAND IO lines */ this->IO_ADDR_R = toto_io_base; this->IO_ADDR_W = toto_io_base; - this->hwcontrol = toto_hwcontrol; + this->cmd_ctrl = toto_hwcontrol; this->dev_ready = NULL; /* 25 us command delay time */ this->chip_delay = 30; - this->eccmode = NAND_ECC_SOFT; + this->ecc.mode = NAND_ECC_SOFT; - /* Scan to find existance of the device */ - if (nand_scan (toto_mtd, 1)) { + /* Scan to find existance of the device */ + if (nand_scan(toto_mtd, 1)) { err = -ENXIO; goto out_mtd; } /* Register the partitions */ - switch(toto_mtd->size){ - case SZ_64M: add_mtd_partitions(toto_mtd, partition_info64M, NUM_PARTITIONS64M); break; - case SZ_32M: add_mtd_partitions(toto_mtd, partition_info32M, NUM_PARTITIONS32M); break; - default: { - printk (KERN_WARNING "Unsupported Nand device\n"); + switch (toto_mtd->size) { + case SZ_64M: + add_mtd_partitions(toto_mtd, partition_info64M, NUM_PARTITIONS64M); + break; + case SZ_32M: + add_mtd_partitions(toto_mtd, partition_info32M, NUM_PARTITIONS32M); + break; + default:{ + printk(KERN_WARNING "Unsupported Nand device\n"); err = -ENXIO; goto out_buf; } } - gpioreserve(NAND_MASK); /* claim our gpios */ - archflashwp(0,0); /* open up flash for writing */ + gpioreserve(NAND_MASK); /* claim our gpios */ + archflashwp(0, 0); /* open up flash for writing */ goto out; -out_buf: - kfree (this->data_buf); -out_mtd: - kfree (toto_mtd); -out: + out_mtd: + kfree(toto_mtd); + out: return err; } @@ -184,20 +186,21 @@ module_init(toto_init); /* * Clean up routine */ -static void __exit toto_cleanup (void) +static void __exit toto_cleanup(void) { /* Release resources, unregister device */ - nand_release (toto_mtd); + nand_release(toto_mtd); /* Free the MTD device structure */ - kfree (toto_mtd); + kfree(toto_mtd); /* stop flash writes */ - archflashwp(0,1); + archflashwp(0, 1); /* release gpios to system */ - gpiorelease(NAND_MASK); + gpiorelease(NAND_MASK); } + module_exit(toto_cleanup); MODULE_LICENSE("GPL"); diff -puN /dev/null drivers/mtd/nand/ts7250.c --- /dev/null 2006-05-29 10:18:53.280907750 -0700 +++ devel-akpm/drivers/mtd/nand/ts7250.c 2006-05-29 15:02:34.000000000 -0700 @@ -0,0 +1,206 @@ +/* + * drivers/mtd/nand/ts7250.c + * + * Copyright (C) 2004 Technologic Systems (support@embeddedARM.com) + * + * Derived from drivers/mtd/nand/edb7312.c + * Copyright (C) 2004 Marius Gröger (mag@sysgo.de) + * + * Derived from drivers/mtd/nand/autcpu12.c + * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de) + * + * $Id: ts7250.c,v 1.4 2004/12/30 22:02:07 joff Exp $ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Overview: + * This is a device driver for the NAND flash device found on the + * TS-7250 board which utilizes a Samsung 32 Mbyte part. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * MTD structure for TS7250 board + */ +static struct mtd_info *ts7250_mtd = NULL; + +#ifdef CONFIG_MTD_PARTITIONS +static const char *part_probes[] = { "cmdlinepart", NULL }; + +#define NUM_PARTITIONS 3 + +/* + * Define static partitions for flash device + */ +static struct mtd_partition partition_info32[] = { + { + .name = "TS-BOOTROM", + .offset = 0x00000000, + .size = 0x00004000, + }, { + .name = "Linux", + .offset = 0x00004000, + .size = 0x01d00000, + }, { + .name = "RedBoot", + .offset = 0x01d04000, + .size = 0x002fc000, + }, +}; + +/* + * Define static partitions for flash device + */ +static struct mtd_partition partition_info128[] = { + { + .name = "TS-BOOTROM", + .offset = 0x00000000, + .size = 0x00004000, + }, { + .name = "Linux", + .offset = 0x00004000, + .size = 0x07d00000, + }, { + .name = "RedBoot", + .offset = 0x07d04000, + .size = 0x002fc000, + }, +}; +#endif + + +/* + * hardware specific access to control-lines + * + * ctrl: + * NAND_NCE: bit 0 -> bit 2 + * NAND_CLE: bit 1 -> bit 1 + * NAND_ALE: bit 2 -> bit 0 + */ +static void ts7250_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *chip = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + unsigned long addr = TS72XX_NAND_CONTROL_VIRT_BASE; + unsigned char bits; + + bits = (ctrl & NAND_CNE) << 2; + bits |= ctrl & NAND_CLE; + bits |= (ctrl & NAND_ALE) >> 2; + + __raw_writeb((__raw_readb(addr) & ~0x7) | bits, addr); + } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, chip->IO_ADDR_W); +} + +/* + * read device ready pin + */ +static int ts7250_device_ready(struct mtd_info *mtd) +{ + return __raw_readb(TS72XX_NAND_BUSY_VIRT_BASE) & 0x20; +} + +/* + * Main initialization routine + */ +static int __init ts7250_init(void) +{ + struct nand_chip *this; + const char *part_type = 0; + int mtd_parts_nb = 0; + struct mtd_partition *mtd_parts = 0; + + if (!machine_is_ts72xx() || board_is_ts7200()) + return -ENXIO; + + /* Allocate memory for MTD device structure and private data */ + ts7250_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); + if (!ts7250_mtd) { + printk("Unable to allocate TS7250 NAND MTD device structure.\n"); + return -ENOMEM; + } + + /* Get pointer to private data */ + this = (struct nand_chip *)(&ts7250_mtd[1]); + + /* Initialize structures */ + memset(ts7250_mtd, 0, sizeof(struct mtd_info)); + memset(this, 0, sizeof(struct nand_chip)); + + /* Link the private data with the MTD structure */ + ts7250_mtd->priv = this; + ts7250_mtd->owner = THIS_MODULE; + + /* insert callbacks */ + this->IO_ADDR_R = (void *)TS72XX_NAND_DATA_VIRT_BASE; + this->IO_ADDR_W = (void *)TS72XX_NAND_DATA_VIRT_BASE; + this->cmd_ctrl = ts7250_hwcontrol; + this->dev_ready = ts7250_device_ready; + this->chip_delay = 15; + this->ecc.mode = NAND_ECC_SOFT; + + printk("Searching for NAND flash...\n"); + /* Scan to find existence of the device */ + if (nand_scan(ts7250_mtd, 1)) { + kfree(ts7250_mtd); + return -ENXIO; + } +#ifdef CONFIG_MTD_PARTITIONS + ts7250_mtd->name = "ts7250-nand"; + mtd_parts_nb = parse_mtd_partitions(ts7250_mtd, part_probes, &mtd_parts, 0); + if (mtd_parts_nb > 0) + part_type = "command line"; + else + mtd_parts_nb = 0; +#endif + if (mtd_parts_nb == 0) { + mtd_parts = partition_info32; + if (ts7250_mtd->size >= (128 * 0x100000)) + mtd_parts = partition_info128; + mtd_parts_nb = NUM_PARTITIONS; + part_type = "static"; + } + + /* Register the partitions */ + printk(KERN_NOTICE "Using %s partition definition\n", part_type); + add_mtd_partitions(ts7250_mtd, mtd_parts, mtd_parts_nb); + + /* Return happy */ + return 0; +} + +module_init(ts7250_init); + +/* + * Clean up routine + */ +static void __exit ts7250_cleanup(void) +{ + /* Unregister the device */ + del_mtd_device(ts7250_mtd); + + /* Free the MTD device structure */ + kfree(ts7250_mtd); +} + +module_exit(ts7250_cleanup); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jesse Off "); +MODULE_DESCRIPTION("MTD map driver for Technologic Systems TS-7250 board"); diff -puN drivers/mtd/nftlcore.c~git-mtd drivers/mtd/nftlcore.c --- devel/drivers/mtd/nftlcore.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/nftlcore.c 2006-05-29 15:02:34.000000000 -0700 @@ -70,8 +70,6 @@ static void nftl_add_mtd(struct mtd_blkt nftl->mbd.devnum = -1; nftl->mbd.blksize = 512; nftl->mbd.tr = tr; - memcpy(&nftl->oobinfo, &mtd->oobinfo, sizeof(struct nand_oobinfo)); - nftl->oobinfo.useecc = MTD_NANDECC_PLACEONLY; if (NFTL_mount(nftl) < 0) { printk(KERN_WARNING "NFTL: could not mount device\n"); @@ -136,6 +134,69 @@ static void nftl_remove_dev(struct mtd_b kfree(nftl); } +/* + * Read oob data from flash + */ +int nftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len, + size_t *retlen, uint8_t *buf) +{ + struct mtd_oob_ops ops; + int res; + + ops.mode = MTD_OOB_PLACE; + ops.ooboffs = offs & (mtd->writesize - 1); + ops.ooblen = len; + ops.oobbuf = buf; + ops.datbuf = NULL; + ops.len = len; + + res = mtd->read_oob(mtd, offs & ~(mtd->writesize - 1), &ops); + *retlen = ops.retlen; + return res; +} + +/* + * Write oob data to flash + */ +int nftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len, + size_t *retlen, uint8_t *buf) +{ + struct mtd_oob_ops ops; + int res; + + ops.mode = MTD_OOB_PLACE; + ops.ooboffs = offs & (mtd->writesize - 1); + ops.ooblen = len; + ops.oobbuf = buf; + ops.datbuf = NULL; + ops.len = len; + + res = mtd->write_oob(mtd, offs & ~(mtd->writesize - 1), &ops); + *retlen = ops.retlen; + return res; +} + +/* + * Write data and oob to flash + */ +static int nftl_write(struct mtd_info *mtd, loff_t offs, size_t len, + size_t *retlen, uint8_t *buf, uint8_t *oob) +{ + struct mtd_oob_ops ops; + int res; + + ops.mode = MTD_OOB_PLACE; + ops.ooboffs = offs; + ops.ooblen = mtd->oobsize; + ops.oobbuf = oob; + ops.datbuf = buf; + ops.len = len; + + res = mtd->write_oob(mtd, offs & ~(mtd->writesize - 1), &ops); + *retlen = ops.retlen; + return res; +} + #ifdef CONFIG_NFTL_RW /* Actual NFTL access routines */ @@ -185,6 +246,7 @@ static u16 NFTL_findfreeblock(struct NFT static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned pendingblock ) { + struct mtd_info *mtd = nftl->mbd.mtd; u16 BlockMap[MAX_SECTORS_PER_UNIT]; unsigned char BlockLastState[MAX_SECTORS_PER_UNIT]; unsigned char BlockFreeFound[MAX_SECTORS_PER_UNIT]; @@ -194,7 +256,7 @@ static u16 NFTL_foldchain (struct NFTLre unsigned int targetEUN; struct nftl_oob oob; int inplace = 1; - size_t retlen; + size_t retlen; memset(BlockMap, 0xff, sizeof(BlockMap)); memset(BlockFreeFound, 0, sizeof(BlockFreeFound)); @@ -210,21 +272,21 @@ static u16 NFTL_foldchain (struct NFTLre /* Scan to find the Erase Unit which holds the actual data for each 512-byte block within the Chain. */ - silly = MAX_LOOPS; + silly = MAX_LOOPS; targetEUN = BLOCK_NIL; while (thisEUN <= nftl->lastEUN ) { - unsigned int status, foldmark; + unsigned int status, foldmark; targetEUN = thisEUN; for (block = 0; block < nftl->EraseSize / 512; block ++) { - MTD_READOOB(nftl->mbd.mtd, - (thisEUN * nftl->EraseSize) + (block * 512), - 16 , &retlen, (char *)&oob); + nftl_read_oob(mtd, (thisEUN * nftl->EraseSize) + + (block * 512), 16 , &retlen, + (char *)&oob); if (block == 2) { - foldmark = oob.u.c.FoldMark | oob.u.c.FoldMark1; - if (foldmark == FOLD_MARK_IN_PROGRESS) { - DEBUG(MTD_DEBUG_LEVEL1, - "Write Inhibited on EUN %d\n", thisEUN); + foldmark = oob.u.c.FoldMark | oob.u.c.FoldMark1; + if (foldmark == FOLD_MARK_IN_PROGRESS) { + DEBUG(MTD_DEBUG_LEVEL1, + "Write Inhibited on EUN %d\n", thisEUN); inplace = 0; } else { /* There's no other reason not to do inplace, @@ -233,7 +295,7 @@ static u16 NFTL_foldchain (struct NFTLre inplace = 1; } } - status = oob.b.Status | oob.b.Status1; + status = oob.b.Status | oob.b.Status1; BlockLastState[block] = status; switch(status) { @@ -328,15 +390,15 @@ static u16 NFTL_foldchain (struct NFTLre return BLOCK_NIL; } } else { - /* We put a fold mark in the chain we are folding only if - we fold in place to help the mount check code. If we do - not fold in place, it is possible to find the valid - chain by selecting the longer one */ - oob.u.c.FoldMark = oob.u.c.FoldMark1 = cpu_to_le16(FOLD_MARK_IN_PROGRESS); - oob.u.c.unused = 0xffffffff; - MTD_WRITEOOB(nftl->mbd.mtd, (nftl->EraseSize * targetEUN) + 2 * 512 + 8, - 8, &retlen, (char *)&oob.u); - } + /* We put a fold mark in the chain we are folding only if we + fold in place to help the mount check code. If we do not fold in + place, it is possible to find the valid chain by selecting the + longer one */ + oob.u.c.FoldMark = oob.u.c.FoldMark1 = cpu_to_le16(FOLD_MARK_IN_PROGRESS); + oob.u.c.unused = 0xffffffff; + nftl_write_oob(mtd, (nftl->EraseSize * targetEUN) + 2 * 512 + 8, + 8, &retlen, (char *)&oob.u); + } /* OK. We now know the location of every block in the Virtual Unit Chain, and the Erase Unit into which we are supposed to be copying. @@ -353,33 +415,33 @@ static u16 NFTL_foldchain (struct NFTLre continue; } - /* copy only in non free block (free blocks can only + /* copy only in non free block (free blocks can only happen in case of media errors or deleted blocks) */ - if (BlockMap[block] == BLOCK_NIL) - continue; + if (BlockMap[block] == BLOCK_NIL) + continue; - ret = MTD_READ(nftl->mbd.mtd, (nftl->EraseSize * BlockMap[block]) + (block * 512), - 512, &retlen, movebuf); - if (ret < 0) { - ret = MTD_READ(nftl->mbd.mtd, (nftl->EraseSize * BlockMap[block]) - + (block * 512), 512, &retlen, - movebuf); - if (ret != -EIO) - printk("Error went away on retry.\n"); - } + ret = mtd->read(mtd, (nftl->EraseSize * BlockMap[block]) + (block * 512), + 512, &retlen, movebuf); + if (ret < 0 && ret != -EUCLEAN) { + ret = mtd->read(mtd, (nftl->EraseSize * BlockMap[block]) + + (block * 512), 512, &retlen, + movebuf); + if (ret != -EIO) + printk("Error went away on retry.\n"); + } memset(&oob, 0xff, sizeof(struct nftl_oob)); oob.b.Status = oob.b.Status1 = SECTOR_USED; - MTD_WRITEECC(nftl->mbd.mtd, (nftl->EraseSize * targetEUN) + (block * 512), - 512, &retlen, movebuf, (char *)&oob, &nftl->oobinfo); + + nftl_write(nftl->mbd.mtd, (nftl->EraseSize * targetEUN) + + (block * 512), 512, &retlen, movebuf, (char *)&oob); } - /* add the header so that it is now a valid chain */ - oob.u.a.VirtUnitNum = oob.u.a.SpareVirtUnitNum - = cpu_to_le16(thisVUC); - oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum = 0xffff; + /* add the header so that it is now a valid chain */ + oob.u.a.VirtUnitNum = oob.u.a.SpareVirtUnitNum = cpu_to_le16(thisVUC); + oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum = 0xffff; - MTD_WRITEOOB(nftl->mbd.mtd, (nftl->EraseSize * targetEUN) + 8, - 8, &retlen, (char *)&oob.u); + nftl_write_oob(mtd, (nftl->EraseSize * targetEUN) + 8, + 8, &retlen, (char *)&oob.u); /* OK. We've moved the whole lot into the new block. Now we have to free the original blocks. */ @@ -396,18 +458,18 @@ static u16 NFTL_foldchain (struct NFTLre while (thisEUN <= nftl->lastEUN && thisEUN != targetEUN) { unsigned int EUNtmp; - EUNtmp = nftl->ReplUnitTable[thisEUN]; + EUNtmp = nftl->ReplUnitTable[thisEUN]; - if (NFTL_formatblock(nftl, thisEUN) < 0) { + if (NFTL_formatblock(nftl, thisEUN) < 0) { /* could not erase : mark block as reserved */ nftl->ReplUnitTable[thisEUN] = BLOCK_RESERVED; - } else { + } else { /* correctly erased : mark it as free */ nftl->ReplUnitTable[thisEUN] = BLOCK_FREE; nftl->numfreeEUNs++; - } - thisEUN = EUNtmp; + } + thisEUN = EUNtmp; } /* Make this the new start of chain for thisVUC */ @@ -473,6 +535,7 @@ static inline u16 NFTL_findwriteunit(str { u16 lastEUN; u16 thisVUC = block / (nftl->EraseSize / 512); + struct mtd_info *mtd = nftl->mbd.mtd; unsigned int writeEUN; unsigned long blockofs = (block * 512) & (nftl->EraseSize -1); size_t retlen; @@ -489,21 +552,22 @@ static inline u16 NFTL_findwriteunit(str */ lastEUN = BLOCK_NIL; writeEUN = nftl->EUNtable[thisVUC]; - silly = MAX_LOOPS; + silly = MAX_LOOPS; while (writeEUN <= nftl->lastEUN) { struct nftl_bci bci; size_t retlen; - unsigned int status; + unsigned int status; lastEUN = writeEUN; - MTD_READOOB(nftl->mbd.mtd, (writeEUN * nftl->EraseSize) + blockofs, - 8, &retlen, (char *)&bci); + nftl_read_oob(mtd, + (writeEUN * nftl->EraseSize) + blockofs, + 8, &retlen, (char *)&bci); DEBUG(MTD_DEBUG_LEVEL2, "Status of block %d in EUN %d is %x\n", block , writeEUN, le16_to_cpu(bci.Status)); - status = bci.Status | bci.Status1; + status = bci.Status | bci.Status1; switch(status) { case SECTOR_FREE: return writeEUN; @@ -574,10 +638,10 @@ static inline u16 NFTL_findwriteunit(str /* We've found a free block. Insert it into the chain. */ if (lastEUN != BLOCK_NIL) { - thisVUC |= 0x8000; /* It's a replacement block */ + thisVUC |= 0x8000; /* It's a replacement block */ } else { - /* The first block in a new chain */ - nftl->EUNtable[thisVUC] = writeEUN; + /* The first block in a new chain */ + nftl->EUNtable[thisVUC] = writeEUN; } /* set up the actual EUN we're writing into */ @@ -585,29 +649,29 @@ static inline u16 NFTL_findwriteunit(str nftl->ReplUnitTable[writeEUN] = BLOCK_NIL; /* ... and on the flash itself */ - MTD_READOOB(nftl->mbd.mtd, writeEUN * nftl->EraseSize + 8, 8, - &retlen, (char *)&oob.u); + nftl_read_oob(mtd, writeEUN * nftl->EraseSize + 8, 8, + &retlen, (char *)&oob.u); oob.u.a.VirtUnitNum = oob.u.a.SpareVirtUnitNum = cpu_to_le16(thisVUC); - MTD_WRITEOOB(nftl->mbd.mtd, writeEUN * nftl->EraseSize + 8, 8, - &retlen, (char *)&oob.u); + nftl_write_oob(mtd, writeEUN * nftl->EraseSize + 8, 8, + &retlen, (char *)&oob.u); - /* we link the new block to the chain only after the + /* we link the new block to the chain only after the block is ready. It avoids the case where the chain could point to a free block */ - if (lastEUN != BLOCK_NIL) { + if (lastEUN != BLOCK_NIL) { /* Both in our cache... */ nftl->ReplUnitTable[lastEUN] = writeEUN; /* ... and on the flash itself */ - MTD_READOOB(nftl->mbd.mtd, (lastEUN * nftl->EraseSize) + 8, - 8, &retlen, (char *)&oob.u); + nftl_read_oob(mtd, (lastEUN * nftl->EraseSize) + 8, + 8, &retlen, (char *)&oob.u); oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum = cpu_to_le16(writeEUN); - MTD_WRITEOOB(nftl->mbd.mtd, (lastEUN * nftl->EraseSize) + 8, - 8, &retlen, (char *)&oob.u); + nftl_write_oob(mtd, (lastEUN * nftl->EraseSize) + 8, + 8, &retlen, (char *)&oob.u); } return writeEUN; @@ -639,10 +703,9 @@ static int nftl_writeblock(struct mtd_bl memset(&oob, 0xff, sizeof(struct nftl_oob)); oob.b.Status = oob.b.Status1 = SECTOR_USED; - MTD_WRITEECC(nftl->mbd.mtd, (writeEUN * nftl->EraseSize) + blockofs, - 512, &retlen, (char *)buffer, (char *)&oob, &nftl->oobinfo); - /* need to write SECTOR_USED flags since they are not written in mtd_writeecc */ + nftl_write(nftl->mbd.mtd, (writeEUN * nftl->EraseSize) + blockofs, + 512, &retlen, (char *)buffer, (char *)&oob); return 0; } #endif /* CONFIG_NFTL_RW */ @@ -651,20 +714,22 @@ static int nftl_readblock(struct mtd_blk char *buffer) { struct NFTLrecord *nftl = (void *)mbd; + struct mtd_info *mtd = nftl->mbd.mtd; u16 lastgoodEUN; u16 thisEUN = nftl->EUNtable[block / (nftl->EraseSize / 512)]; unsigned long blockofs = (block * 512) & (nftl->EraseSize - 1); - unsigned int status; + unsigned int status; int silly = MAX_LOOPS; - size_t retlen; - struct nftl_bci bci; + size_t retlen; + struct nftl_bci bci; lastgoodEUN = BLOCK_NIL; - if (thisEUN != BLOCK_NIL) { + if (thisEUN != BLOCK_NIL) { while (thisEUN < nftl->nb_blocks) { - if (MTD_READOOB(nftl->mbd.mtd, (thisEUN * nftl->EraseSize) + blockofs, - 8, &retlen, (char *)&bci) < 0) + if (nftl_read_oob(mtd, (thisEUN * nftl->EraseSize) + + blockofs, 8, &retlen, + (char *)&bci) < 0) status = SECTOR_IGNORE; else status = bci.Status | bci.Status1; @@ -694,7 +759,7 @@ static int nftl_readblock(struct mtd_blk } thisEUN = nftl->ReplUnitTable[thisEUN]; } - } + } the_end: if (lastgoodEUN == BLOCK_NIL) { @@ -703,7 +768,9 @@ static int nftl_readblock(struct mtd_blk } else { loff_t ptr = (lastgoodEUN * nftl->EraseSize) + blockofs; size_t retlen; - if (MTD_READ(nftl->mbd.mtd, ptr, 512, &retlen, buffer)) + int res = mtd->read(mtd, ptr, 512, &retlen, buffer); + + if (res < 0 && res != -EUCLEAN) return -EIO; } return 0; diff -puN drivers/mtd/nftlmount.c~git-mtd drivers/mtd/nftlmount.c --- devel/drivers/mtd/nftlmount.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/nftlmount.c 2006-05-29 15:02:34.000000000 -0700 @@ -33,6 +33,11 @@ char nftlmountrev[]="$Revision: 1.41 $"; +extern int nftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len, + size_t *retlen, uint8_t *buf); +extern int nftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len, + size_t *retlen, uint8_t *buf); + /* find_boot_record: Find the NFTL Media Header and its Spare copy which contains the * various device information of the NFTL partition and Bad Unit Table. Update * the ReplUnitTable[] table accroding to the Bad Unit Table. ReplUnitTable[] @@ -45,6 +50,7 @@ static int find_boot_record(struct NFTLr size_t retlen; u8 buf[SECTORSIZE]; struct NFTLMediaHeader *mh = &nftl->MediaHdr; + struct mtd_info *mtd = nftl->mbd.mtd; unsigned int i; /* Assume logical EraseSize == physical erasesize for starting the scan. @@ -65,7 +71,8 @@ static int find_boot_record(struct NFTLr /* Check for ANAND header first. Then can whinge if it's found but later checks fail */ - ret = MTD_READ(nftl->mbd.mtd, block * nftl->EraseSize, SECTORSIZE, &retlen, buf); + ret = mtd->read(mtd, block * nftl->EraseSize, SECTORSIZE, + &retlen, buf); /* We ignore ret in case the ECC of the MediaHeader is invalid (which is apparently acceptable) */ if (retlen != SECTORSIZE) { @@ -90,8 +97,9 @@ static int find_boot_record(struct NFTLr } /* To be safer with BIOS, also use erase mark as discriminant */ - if ((ret = MTD_READOOB(nftl->mbd.mtd, block * nftl->EraseSize + SECTORSIZE + 8, - 8, &retlen, (char *)&h1) < 0)) { + if ((ret = nftl_read_oob(mtd, block * nftl->EraseSize + + SECTORSIZE + 8, 8, &retlen, + (char *)&h1) < 0)) { printk(KERN_WARNING "ANAND header found at 0x%x in mtd%d, but OOB data read failed (err %d)\n", block * nftl->EraseSize, nftl->mbd.mtd->index, ret); continue; @@ -109,8 +117,8 @@ static int find_boot_record(struct NFTLr } /* Finally reread to check ECC */ - if ((ret = MTD_READECC(nftl->mbd.mtd, block * nftl->EraseSize, SECTORSIZE, - &retlen, buf, (char *)&oob, NULL) < 0)) { + if ((ret = mtd->read(mtd, block * nftl->EraseSize, SECTORSIZE, + &retlen, buf) < 0)) { printk(KERN_NOTICE "ANAND header found at 0x%x in mtd%d, but ECC read failed (err %d)\n", block * nftl->EraseSize, nftl->mbd.mtd->index, ret); continue; @@ -228,9 +236,9 @@ device is already correct. The new DiskOnChip driver already scanned the bad block table. Just query it. if ((i & (SECTORSIZE - 1)) == 0) { /* read one sector for every SECTORSIZE of blocks */ - if ((ret = MTD_READECC(nftl->mbd.mtd, block * nftl->EraseSize + - i + SECTORSIZE, SECTORSIZE, &retlen, buf, - (char *)&oob, NULL)) < 0) { + if ((ret = mtd->read(nftl->mbd.mtd, block * nftl->EraseSize + + i + SECTORSIZE, SECTORSIZE, &retlen, + buf)) < 0) { printk(KERN_NOTICE "Read of bad sector table failed (err %d)\n", ret); kfree(nftl->ReplUnitTable); @@ -268,18 +276,22 @@ static int memcmpb(void *a, int c, int n static int check_free_sectors(struct NFTLrecord *nftl, unsigned int address, int len, int check_oob) { - int i; - size_t retlen; u8 buf[SECTORSIZE + nftl->mbd.mtd->oobsize]; + struct mtd_info *mtd = nftl->mbd.mtd; + size_t retlen; + int i; for (i = 0; i < len; i += SECTORSIZE) { - if (MTD_READECC(nftl->mbd.mtd, address, SECTORSIZE, &retlen, buf, &buf[SECTORSIZE], &nftl->oobinfo) < 0) + if (mtd->read(mtd, address, SECTORSIZE, &retlen, buf)) return -1; if (memcmpb(buf, 0xff, SECTORSIZE) != 0) return -1; if (check_oob) { - if (memcmpb(buf + SECTORSIZE, 0xff, nftl->mbd.mtd->oobsize) != 0) + if(nftl_read_oob(mtd, address, mtd->oobsize, + &retlen, &buf[SECTORSIZE]) < 0) + return -1; + if (memcmpb(buf + SECTORSIZE, 0xff, mtd->oobsize) != 0) return -1; } address += SECTORSIZE; @@ -301,10 +313,11 @@ int NFTL_formatblock(struct NFTLrecord * unsigned int nb_erases, erase_mark; struct nftl_uci1 uci; struct erase_info *instr = &nftl->instr; + struct mtd_info *mtd = nftl->mbd.mtd; /* Read the Unit Control Information #1 for Wear-Leveling */ - if (MTD_READOOB(nftl->mbd.mtd, block * nftl->EraseSize + SECTORSIZE + 8, - 8, &retlen, (char *)&uci) < 0) + if (nftl_read_oob(mtd, block * nftl->EraseSize + SECTORSIZE + 8, + 8, &retlen, (char *)&uci) < 0) goto default_uci1; erase_mark = le16_to_cpu ((uci.EraseMark | uci.EraseMark1)); @@ -321,7 +334,7 @@ int NFTL_formatblock(struct NFTLrecord * instr->mtd = nftl->mbd.mtd; instr->addr = block * nftl->EraseSize; instr->len = nftl->EraseSize; - MTD_ERASE(nftl->mbd.mtd, instr); + mtd->erase(mtd, instr); if (instr->state == MTD_ERASE_FAILED) { printk("Error while formatting block %d\n", block); @@ -343,8 +356,8 @@ int NFTL_formatblock(struct NFTLrecord * goto fail; uci.WearInfo = le32_to_cpu(nb_erases); - if (MTD_WRITEOOB(nftl->mbd.mtd, block * nftl->EraseSize + SECTORSIZE + 8, 8, - &retlen, (char *)&uci) < 0) + if (nftl_write_oob(mtd, block * nftl->EraseSize + SECTORSIZE + + 8, 8, &retlen, (char *)&uci) < 0) goto fail; return 0; fail: @@ -365,6 +378,7 @@ fail: * case. */ static void check_sectors_in_chain(struct NFTLrecord *nftl, unsigned int first_block) { + struct mtd_info *mtd = nftl->mbd.mtd; unsigned int block, i, status; struct nftl_bci bci; int sectors_per_block; @@ -374,8 +388,9 @@ static void check_sectors_in_chain(struc block = first_block; for (;;) { for (i = 0; i < sectors_per_block; i++) { - if (MTD_READOOB(nftl->mbd.mtd, block * nftl->EraseSize + i * SECTORSIZE, - 8, &retlen, (char *)&bci) < 0) + if (nftl_read_oob(mtd, + block * nftl->EraseSize + i * SECTORSIZE, + 8, &retlen, (char *)&bci) < 0) status = SECTOR_IGNORE; else status = bci.Status | bci.Status1; @@ -394,9 +409,10 @@ static void check_sectors_in_chain(struc /* sector not free actually : mark it as SECTOR_IGNORE */ bci.Status = SECTOR_IGNORE; bci.Status1 = SECTOR_IGNORE; - MTD_WRITEOOB(nftl->mbd.mtd, - block * nftl->EraseSize + i * SECTORSIZE, - 8, &retlen, (char *)&bci); + nftl_write_oob(mtd, block * + nftl->EraseSize + + i * SECTORSIZE, 8, + &retlen, (char *)&bci); } break; default: @@ -481,13 +497,14 @@ static void format_chain(struct NFTLreco * 1. */ static int check_and_mark_free_block(struct NFTLrecord *nftl, int block) { + struct mtd_info *mtd = nftl->mbd.mtd; struct nftl_uci1 h1; unsigned int erase_mark; size_t retlen; /* check erase mark. */ - if (MTD_READOOB(nftl->mbd.mtd, block * nftl->EraseSize + SECTORSIZE + 8, 8, - &retlen, (char *)&h1) < 0) + if (nftl_read_oob(mtd, block * nftl->EraseSize + SECTORSIZE + 8, 8, + &retlen, (char *)&h1) < 0) return -1; erase_mark = le16_to_cpu ((h1.EraseMark | h1.EraseMark1)); @@ -501,8 +518,9 @@ static int check_and_mark_free_block(str h1.EraseMark = cpu_to_le16(ERASE_MARK); h1.EraseMark1 = cpu_to_le16(ERASE_MARK); h1.WearInfo = cpu_to_le32(0); - if (MTD_WRITEOOB(nftl->mbd.mtd, block * nftl->EraseSize + SECTORSIZE + 8, 8, - &retlen, (char *)&h1) < 0) + if (nftl_write_oob(mtd, + block * nftl->EraseSize + SECTORSIZE + 8, 8, + &retlen, (char *)&h1) < 0) return -1; } else { #if 0 @@ -513,8 +531,8 @@ static int check_and_mark_free_block(str SECTORSIZE, 0) != 0) return -1; - if (MTD_READOOB(nftl->mbd.mtd, block * nftl->EraseSize + i, - 16, &retlen, buf) < 0) + if (nftl_read_oob(mtd, block * nftl->EraseSize + i, + 16, &retlen, buf) < 0) return -1; if (i == SECTORSIZE) { /* skip erase mark */ @@ -540,11 +558,12 @@ static int check_and_mark_free_block(str */ static int get_fold_mark(struct NFTLrecord *nftl, unsigned int block) { + struct mtd_info *mtd = nftl->mbd.mtd; struct nftl_uci2 uci; size_t retlen; - if (MTD_READOOB(nftl->mbd.mtd, block * nftl->EraseSize + 2 * SECTORSIZE + 8, - 8, &retlen, (char *)&uci) < 0) + if (nftl_read_oob(mtd, block * nftl->EraseSize + 2 * SECTORSIZE + 8, + 8, &retlen, (char *)&uci) < 0) return 0; return le16_to_cpu((uci.FoldMark | uci.FoldMark1)); @@ -558,6 +577,7 @@ int NFTL_mount(struct NFTLrecord *s) int chain_length, do_format_chain; struct nftl_uci0 h0; struct nftl_uci1 h1; + struct mtd_info *mtd = s->mbd.mtd; size_t retlen; /* search for NFTL MediaHeader and Spare NFTL Media Header */ @@ -582,10 +602,13 @@ int NFTL_mount(struct NFTLrecord *s) for (;;) { /* read the block header. If error, we format the chain */ - if (MTD_READOOB(s->mbd.mtd, block * s->EraseSize + 8, 8, - &retlen, (char *)&h0) < 0 || - MTD_READOOB(s->mbd.mtd, block * s->EraseSize + SECTORSIZE + 8, 8, - &retlen, (char *)&h1) < 0) { + if (nftl_read_oob(mtd, + block * s->EraseSize + 8, 8, + &retlen, (char *)&h0) < 0 || + nftl_read_oob(mtd, + block * s->EraseSize + + SECTORSIZE + 8, 8, + &retlen, (char *)&h1) < 0) { s->ReplUnitTable[block] = BLOCK_NIL; do_format_chain = 1; break; diff -puN drivers/mtd/onenand/Kconfig~git-mtd drivers/mtd/onenand/Kconfig --- devel/drivers/mtd/onenand/Kconfig~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/onenand/Kconfig 2006-05-29 15:02:34.000000000 -0700 @@ -29,6 +29,20 @@ config MTD_ONENAND_GENERIC help Support for OneNAND flash via platform device driver. +config MTD_ONENAND_OTP + bool "OneNAND OTP Support" + depends on MTD_ONENAND + help + One Block of the NAND Flash Array memory is reserved as + a One-Time Programmable Block memory area. + Also, 1st Block of NAND Flash Array can be used as OTP. + + The OTP block can be read, programmed and locked using the same + operations as any other NAND Flash Array memory block. + OTP block cannot be erased. + + OTP block is fully-guaranteed to be a valid block. + config MTD_ONENAND_SYNC_READ bool "OneNAND Sync. Burst Read Support" depends on ARCH_OMAP diff -puN drivers/mtd/onenand/onenand_base.c~git-mtd drivers/mtd/onenand/onenand_base.c --- devel/drivers/mtd/onenand/onenand_base.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/onenand/onenand_base.c 2006-05-29 15:02:34.000000000 -0700 @@ -23,8 +23,7 @@ /** * onenand_oob_64 - oob info for large (2KB) page */ -static struct nand_oobinfo onenand_oob_64 = { - .useecc = MTD_NANDECC_AUTOPLACE, +static struct nand_ecclayout onenand_oob_64 = { .eccbytes = 20, .eccpos = { 8, 9, 10, 11, 12, @@ -34,14 +33,14 @@ static struct nand_oobinfo onenand_oob_6 }, .oobfree = { {2, 3}, {14, 2}, {18, 3}, {30, 2}, - {24, 3}, {46, 2}, {40, 3}, {62, 2} } + {34, 3}, {46, 2}, {50, 3}, {62, 2} + } }; /** * onenand_oob_32 - oob info for middle (1KB) page */ -static struct nand_oobinfo onenand_oob_32 = { - .useecc = MTD_NANDECC_AUTOPLACE, +static struct nand_ecclayout onenand_oob_32 = { .eccbytes = 10, .eccpos = { 8, 9, 10, 11, 12, @@ -190,7 +189,7 @@ static int onenand_buffer_address(int da static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t len) { struct onenand_chip *this = mtd->priv; - int value, readcmd = 0; + int value, readcmd = 0, block_cmd = 0; int block, page; /* Now we use page size operation */ int sectors = 4, count = 4; @@ -206,6 +205,8 @@ static int onenand_command(struct mtd_in case ONENAND_CMD_ERASE: case ONENAND_CMD_BUFFERRAM: + case ONENAND_CMD_OTP_ACCESS: + block_cmd = 1; block = (int) (addr >> this->erase_shift); page = -1; break; @@ -233,6 +234,12 @@ static int onenand_command(struct mtd_in /* Write 'DFS, FBA' of Flash */ value = onenand_block_address(this, block); this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1); + + if (block_cmd) { + /* Select DataRAM for DDP */ + value = onenand_bufferram_address(this, block); + this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2); + } } if (page != -1) { @@ -301,6 +308,7 @@ static int onenand_wait(struct mtd_info if (state != FL_READING) cond_resched(); + touch_softlockup_watchdog(); } /* To get correct interrupt status in timeout case */ interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT); @@ -344,7 +352,7 @@ static inline int onenand_bufferram_offs if (ONENAND_CURRENT_BUFFERRAM(this)) { if (area == ONENAND_DATARAM) - return mtd->oobblock; + return mtd->writesize; if (area == ONENAND_SPARERAM) return mtd->oobsize; } @@ -372,6 +380,17 @@ static int onenand_read_bufferram(struct bufferram += onenand_bufferram_offset(mtd, area); + if (ONENAND_CHECK_BYTE_ACCESS(count)) { + unsigned short word; + + /* Align with word(16-bit) size */ + count--; + + /* Read word and save byte */ + word = this->read_word(bufferram + offset + count); + buffer[count] = (word & 0xff); + } + memcpy(buffer, bufferram + offset, count); return 0; @@ -399,6 +418,17 @@ static int onenand_sync_read_bufferram(s this->mmcontrol(mtd, ONENAND_SYS_CFG1_SYNC_READ); + if (ONENAND_CHECK_BYTE_ACCESS(count)) { + unsigned short word; + + /* Align with word(16-bit) size */ + count--; + + /* Read word and save byte */ + word = this->read_word(bufferram + offset + count); + buffer[count] = (word & 0xff); + } + memcpy(buffer, bufferram + offset, count); this->mmcontrol(mtd, 0); @@ -426,6 +456,22 @@ static int onenand_write_bufferram(struc bufferram += onenand_bufferram_offset(mtd, area); + if (ONENAND_CHECK_BYTE_ACCESS(count)) { + unsigned short word; + int byte_offset; + + /* Align with word(16-bit) size */ + count--; + + /* Calculate byte access offset */ + byte_offset = offset + count; + + /* Read word and save byte */ + word = this->read_word(bufferram + byte_offset); + word = (word & ~0xff) | buffer[count]; + this->write_word(word, bufferram + byte_offset); + } + memcpy(bufferram + offset, buffer, count); return 0; @@ -549,31 +595,28 @@ static void onenand_release_device(struc } /** - * onenand_read_ecc - [MTD Interface] Read data with ECC + * onenand_read - [MTD Interface] Read data from flash * @param mtd MTD device structure * @param from offset to read from * @param len number of bytes to read * @param retlen pointer to variable to store the number of read bytes * @param buf the databuffer to put data - * @param oob_buf filesystem supplied oob data buffer - * @param oobsel oob selection structure * - * OneNAND read with ECC - */ -static int onenand_read_ecc(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf, - u_char *oob_buf, struct nand_oobinfo *oobsel) + * Read with ecc +*/ +static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) { struct onenand_chip *this = mtd->priv; int read = 0, column; int thislen; int ret = 0; - DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_ecc: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len); + DEBUG(MTD_DEBUG_LEVEL3, "onenand_read: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len); /* Do not allow reads past end of device */ if ((from + len) > mtd->size) { - DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_ecc: Attempt read beyond end of device\n"); + DEBUG(MTD_DEBUG_LEVEL0, "onenand_read: Attempt read beyond end of device\n"); *retlen = 0; return -EINVAL; } @@ -584,14 +627,14 @@ static int onenand_read_ecc(struct mtd_i /* TODO handling oob */ while (read < len) { - thislen = min_t(int, mtd->oobblock, len - read); + thislen = min_t(int, mtd->writesize, len - read); - column = from & (mtd->oobblock - 1); - if (column + thislen > mtd->oobblock) - thislen = mtd->oobblock - column; + column = from & (mtd->writesize - 1); + if (column + thislen > mtd->writesize) + thislen = mtd->writesize - column; if (!onenand_check_bufferram(mtd, from)) { - this->command(mtd, ONENAND_CMD_READ, from, mtd->oobblock); + this->command(mtd, ONENAND_CMD_READ, from, mtd->writesize); ret = this->wait(mtd, FL_READING); /* First copy data and check return value for ECC handling */ @@ -606,7 +649,7 @@ static int onenand_read_ecc(struct mtd_i break; if (ret) { - DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_ecc: read failed = %d\n", ret); + DEBUG(MTD_DEBUG_LEVEL0, "onenand_read: read failed = %d\n", ret); goto out; } @@ -628,23 +671,7 @@ out: } /** - * onenand_read - [MTD Interface] MTD compability function for onenand_read_ecc - * @param mtd MTD device structure - * @param from offset to read from - * @param len number of bytes to read - * @param retlen pointer to variable to store the number of read bytes - * @param buf the databuffer to put data - * - * This function simply calls onenand_read_ecc with oob buffer and oobsel = NULL -*/ -static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf) -{ - return onenand_read_ecc(mtd, from, len, retlen, buf, NULL, NULL); -} - -/** - * onenand_read_oob - [MTD Interface] OneNAND read out-of-band + * onenand_do_read_oob - [MTD Interface] OneNAND read out-of-band * @param mtd MTD device structure * @param from offset to read from * @param len number of bytes to read @@ -653,8 +680,8 @@ static int onenand_read(struct mtd_info * * OneNAND read out-of-band data from the spare area */ -static int onenand_read_oob(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf) +int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) { struct onenand_chip *this = mtd->priv; int read = 0, thislen, column; @@ -704,7 +731,7 @@ static int onenand_read_oob(struct mtd_i /* Read more? */ if (read < len) { /* Page size */ - from += mtd->oobblock; + from += mtd->writesize; column = 0; } } @@ -717,8 +744,53 @@ out: return ret; } +/** + * onenand_read_oob - [MTD Interface] NAND write data and/or out-of-band + * @mtd: MTD device structure + * @from: offset to read from + * @ops: oob operation description structure + */ +static int onenand_read_oob(struct mtd_info *mtd, loff_t from, + struct mtd_oob_ops *ops) +{ + BUG_ON(ops->mode != MTD_OOB_PLACE); + + return onenand_do_read_oob(mtd, from + ops->ooboffs, ops->len, + &ops->retlen, ops->oobbuf); +} + #ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE /** + * onenand_verify_oob - [GENERIC] verify the oob contents after a write + * @param mtd MTD device structure + * @param buf the databuffer to verify + * @param to offset to read from + * @param len number of bytes to read and compare + * + */ +static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to, int len) +{ + struct onenand_chip *this = mtd->priv; + char *readp = this->page_buf; + int column = to & (mtd->oobsize - 1); + int status, i; + + this->command(mtd, ONENAND_CMD_READOOB, to, mtd->oobsize); + onenand_update_bufferram(mtd, to, 0); + status = this->wait(mtd, FL_READING); + if (status) + return status; + + this->read_bufferram(mtd, ONENAND_SPARERAM, readp, column, len); + + for(i = 0; i < len; i++) + if (buf[i] != 0xFF && buf[i] != readp[i]) + return -EBADMSG; + + return 0; +} + +/** * onenand_verify_page - [GENERIC] verify the chip contents after a write * @param mtd MTD device structure * @param buf the databuffer to verify @@ -731,7 +803,7 @@ static int onenand_verify_page(struct mt void __iomem *dataram0, *dataram1; int ret = 0; - this->command(mtd, ONENAND_CMD_READ, addr, mtd->oobblock); + this->command(mtd, ONENAND_CMD_READ, addr, mtd->writesize); ret = this->wait(mtd, FL_READING); if (ret) @@ -741,53 +813,51 @@ static int onenand_verify_page(struct mt /* Check, if the two dataram areas are same */ dataram0 = this->base + ONENAND_DATARAM; - dataram1 = dataram0 + mtd->oobblock; + dataram1 = dataram0 + mtd->writesize; - if (memcmp(dataram0, dataram1, mtd->oobblock)) + if (memcmp(dataram0, dataram1, mtd->writesize)) return -EBADMSG; return 0; } #else #define onenand_verify_page(...) (0) +#define onenand_verify_oob(...) (0) #endif -#define NOTALIGNED(x) ((x & (mtd->oobblock - 1)) != 0) +#define NOTALIGNED(x) ((x & (mtd->writesize - 1)) != 0) /** - * onenand_write_ecc - [MTD Interface] OneNAND write with ECC + * onenand_write - [MTD Interface] write buffer to FLASH * @param mtd MTD device structure * @param to offset to write to * @param len number of bytes to write * @param retlen pointer to variable to store the number of written bytes * @param buf the data to write - * @param eccbuf filesystem supplied oob data buffer - * @param oobsel oob selection structure * - * OneNAND write with ECC + * Write with ECC */ -static int onenand_write_ecc(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf, - u_char *eccbuf, struct nand_oobinfo *oobsel) +static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) { struct onenand_chip *this = mtd->priv; int written = 0; int ret = 0; - DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_ecc: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len); + DEBUG(MTD_DEBUG_LEVEL3, "onenand_write: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len); /* Initialize retlen, in case of early exit */ *retlen = 0; /* Do not allow writes past end of device */ if (unlikely((to + len) > mtd->size)) { - DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_ecc: Attempt write to past end of device\n"); + DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: Attempt write to past end of device\n"); return -EINVAL; } /* Reject writes, which are not page aligned */ if (unlikely(NOTALIGNED(to)) || unlikely(NOTALIGNED(len))) { - DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_ecc: Attempt to write not page aligned data\n"); + DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: Attempt to write not page aligned data\n"); return -EINVAL; } @@ -796,20 +866,20 @@ static int onenand_write_ecc(struct mtd_ /* Loop until all data write */ while (written < len) { - int thislen = min_t(int, mtd->oobblock, len - written); + int thislen = min_t(int, mtd->writesize, len - written); - this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobblock); + this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->writesize); this->write_bufferram(mtd, ONENAND_DATARAM, buf, 0, thislen); this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, mtd->oobsize); - this->command(mtd, ONENAND_CMD_PROG, to, mtd->oobblock); + this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize); onenand_update_bufferram(mtd, to, 1); ret = this->wait(mtd, FL_WRITING); if (ret) { - DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_ecc: write filaed %d\n", ret); + DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: write filaed %d\n", ret); goto out; } @@ -818,7 +888,7 @@ static int onenand_write_ecc(struct mtd_ /* Only check verify write turn on */ ret = onenand_verify_page(mtd, (u_char *) buf, to); if (ret) { - DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_ecc: verify failed %d\n", ret); + DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: verify failed %d\n", ret); goto out; } @@ -839,24 +909,7 @@ out: } /** - * onenand_write - [MTD Interface] compability function for onenand_write_ecc - * @param mtd MTD device structure - * @param to offset to write to - * @param len number of bytes to write - * @param retlen pointer to variable to store the number of written bytes - * @param buf the data to write - * - * This function simply calls onenand_write_ecc - * with oob buffer and oobsel = NULL - */ -static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) -{ - return onenand_write_ecc(mtd, to, len, retlen, buf, NULL, NULL); -} - -/** - * onenand_write_oob - [MTD Interface] OneNAND write out-of-band + * onenand_do_write_oob - [Internal] OneNAND write out-of-band * @param mtd MTD device structure * @param to offset to write to * @param len number of bytes to write @@ -865,11 +918,11 @@ static int onenand_write(struct mtd_info * * OneNAND write out-of-band */ -static int onenand_write_oob(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) +static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) { struct onenand_chip *this = mtd->priv; - int column, status; + int column, ret = 0; int written = 0; DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len); @@ -894,16 +947,27 @@ static int onenand_write_oob(struct mtd_ this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobsize); - this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, mtd->oobsize); - this->write_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen); + /* We send data to spare ram with oobsize + * to prevent byte access */ + memset(this->page_buf, 0xff, mtd->oobsize); + memcpy(this->page_buf + column, buf, thislen); + this->write_bufferram(mtd, ONENAND_SPARERAM, this->page_buf, 0, mtd->oobsize); this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize); onenand_update_bufferram(mtd, to, 0); - status = this->wait(mtd, FL_WRITING); - if (status) + ret = this->wait(mtd, FL_WRITING); + if (ret) { + DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: write filaed %d\n", ret); goto out; + } + + ret = onenand_verify_oob(mtd, buf, to, thislen); + if (ret) { + DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: verify failed %d\n", ret); + goto out; + } written += thislen; @@ -920,145 +984,22 @@ out: *retlen = written; - return 0; + return ret; } /** - * onenand_writev_ecc - [MTD Interface] write with iovec with ecc - * @param mtd MTD device structure - * @param vecs the iovectors to write - * @param count number of vectors - * @param to offset to write to - * @param retlen pointer to variable to store the number of written bytes - * @param eccbuf filesystem supplied oob data buffer - * @param oobsel oob selection structure - * - * OneNAND write with iovec with ecc + * onenand_write_oob - [MTD Interface] NAND write data and/or out-of-band + * @mtd: MTD device structure + * @from: offset to read from + * @ops: oob operation description structure */ -static int onenand_writev_ecc(struct mtd_info *mtd, const struct kvec *vecs, - unsigned long count, loff_t to, size_t *retlen, - u_char *eccbuf, struct nand_oobinfo *oobsel) +static int onenand_write_oob(struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops) { - struct onenand_chip *this = mtd->priv; - unsigned char *pbuf; - size_t total_len, len; - int i, written = 0; - int ret = 0; - - /* Preset written len for early exit */ - *retlen = 0; + BUG_ON(ops->mode != MTD_OOB_PLACE); - /* Calculate total length of data */ - total_len = 0; - for (i = 0; i < count; i++) - total_len += vecs[i].iov_len; - - DEBUG(MTD_DEBUG_LEVEL3, "onenand_writev_ecc: to = 0x%08x, len = %i, count = %ld\n", (unsigned int) to, (unsigned int) total_len, count); - - /* Do not allow write past end of the device */ - if (unlikely((to + total_len) > mtd->size)) { - DEBUG(MTD_DEBUG_LEVEL0, "onenand_writev_ecc: Attempted write past end of device\n"); - return -EINVAL; - } - - /* Reject writes, which are not page aligned */ - if (unlikely(NOTALIGNED(to)) || unlikely(NOTALIGNED(total_len))) { - DEBUG(MTD_DEBUG_LEVEL0, "onenand_writev_ecc: Attempt to write not page aligned data\n"); - return -EINVAL; - } - - /* Grab the lock and see if the device is available */ - onenand_get_device(mtd, FL_WRITING); - - /* TODO handling oob */ - - /* Loop until all keve's data has been written */ - len = 0; - while (count) { - pbuf = this->page_buf; - /* - * If the given tuple is >= pagesize then - * write it out from the iov - */ - if ((vecs->iov_len - len) >= mtd->oobblock) { - pbuf = vecs->iov_base + len; - - len += mtd->oobblock; - - /* Check, if we have to switch to the next tuple */ - if (len >= (int) vecs->iov_len) { - vecs++; - len = 0; - count--; - } - } else { - int cnt = 0, thislen; - while (cnt < mtd->oobblock) { - thislen = min_t(int, mtd->oobblock - cnt, vecs->iov_len - len); - memcpy(this->page_buf + cnt, vecs->iov_base + len, thislen); - cnt += thislen; - len += thislen; - - /* Check, if we have to switch to the next tuple */ - if (len >= (int) vecs->iov_len) { - vecs++; - len = 0; - count--; - } - } - } - - this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobblock); - - this->write_bufferram(mtd, ONENAND_DATARAM, pbuf, 0, mtd->oobblock); - this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, mtd->oobsize); - - this->command(mtd, ONENAND_CMD_PROG, to, mtd->oobblock); - - onenand_update_bufferram(mtd, to, 1); - - ret = this->wait(mtd, FL_WRITING); - if (ret) { - DEBUG(MTD_DEBUG_LEVEL0, "onenand_writev_ecc: write failed %d\n", ret); - goto out; - } - - - /* Only check verify write turn on */ - ret = onenand_verify_page(mtd, (u_char *) pbuf, to); - if (ret) { - DEBUG(MTD_DEBUG_LEVEL0, "onenand_writev_ecc: verify failed %d\n", ret); - goto out; - } - - written += mtd->oobblock; - - to += mtd->oobblock; - } - -out: - /* Deselect and wakt up anyone waiting on the device */ - onenand_release_device(mtd); - - *retlen = written; - - return 0; -} - -/** - * onenand_writev - [MTD Interface] compabilty function for onenand_writev_ecc - * @param mtd MTD device structure - * @param vecs the iovectors to write - * @param count number of vectors - * @param to offset to write to - * @param retlen pointer to variable to store the number of written bytes - * - * OneNAND write with kvec. This just calls the ecc function - */ -static int onenand_writev(struct mtd_info *mtd, const struct kvec *vecs, - unsigned long count, loff_t to, size_t *retlen) -{ - return onenand_writev_ecc(mtd, vecs, count, to, retlen, NULL, NULL); + return onenand_do_write_oob(mtd, to + ops->ooboffs, ops->len, + &ops->retlen, ops->oobbuf); } /** @@ -1227,7 +1168,7 @@ static int onenand_default_block_markbad /* We write two bytes, so we dont have to mess with 16 bit access */ ofs += mtd->oobsize + (bbm->badblockpos & ~0x01); - return mtd->write_oob(mtd, ofs , 2, &retlen, buf); + return onenand_do_write_oob(mtd, ofs , 2, &retlen, buf); } /** @@ -1324,6 +1265,304 @@ static int onenand_unlock(struct mtd_inf return 0; } +#ifdef CONFIG_MTD_ONENAND_OTP + +/* Interal OTP operation */ +typedef int (*otp_op_t)(struct mtd_info *mtd, loff_t form, size_t len, + size_t *retlen, u_char *buf); + +/** + * do_otp_read - [DEFAULT] Read OTP block area + * @param mtd MTD device structure + * @param from The offset to read + * @param len number of bytes to read + * @param retlen pointer to variable to store the number of readbytes + * @param buf the databuffer to put/get data + * + * Read OTP block area. + */ +static int do_otp_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + struct onenand_chip *this = mtd->priv; + int ret; + + /* Enter OTP access mode */ + this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0); + this->wait(mtd, FL_OTPING); + + ret = mtd->read(mtd, from, len, retlen, buf); + + /* Exit OTP access mode */ + this->command(mtd, ONENAND_CMD_RESET, 0, 0); + this->wait(mtd, FL_RESETING); + + return ret; +} + +/** + * do_otp_write - [DEFAULT] Write OTP block area + * @param mtd MTD device structure + * @param from The offset to write + * @param len number of bytes to write + * @param retlen pointer to variable to store the number of write bytes + * @param buf the databuffer to put/get data + * + * Write OTP block area. + */ +static int do_otp_write(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + struct onenand_chip *this = mtd->priv; + unsigned char *pbuf = buf; + int ret; + + /* Force buffer page aligned */ + if (len < mtd->writesize) { + memcpy(this->page_buf, buf, len); + memset(this->page_buf + len, 0xff, mtd->writesize - len); + pbuf = this->page_buf; + len = mtd->writesize; + } + + /* Enter OTP access mode */ + this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0); + this->wait(mtd, FL_OTPING); + + ret = mtd->write(mtd, from, len, retlen, pbuf); + + /* Exit OTP access mode */ + this->command(mtd, ONENAND_CMD_RESET, 0, 0); + this->wait(mtd, FL_RESETING); + + return ret; +} + +/** + * do_otp_lock - [DEFAULT] Lock OTP block area + * @param mtd MTD device structure + * @param from The offset to lock + * @param len number of bytes to lock + * @param retlen pointer to variable to store the number of lock bytes + * @param buf the databuffer to put/get data + * + * Lock OTP block area. + */ +static int do_otp_lock(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + struct onenand_chip *this = mtd->priv; + int ret; + + /* Enter OTP access mode */ + this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0); + this->wait(mtd, FL_OTPING); + + ret = onenand_do_write_oob(mtd, from, len, retlen, buf); + + /* Exit OTP access mode */ + this->command(mtd, ONENAND_CMD_RESET, 0, 0); + this->wait(mtd, FL_RESETING); + + return ret; +} + +/** + * onenand_otp_walk - [DEFAULT] Handle OTP operation + * @param mtd MTD device structure + * @param from The offset to read/write + * @param len number of bytes to read/write + * @param retlen pointer to variable to store the number of read bytes + * @param buf the databuffer to put/get data + * @param action do given action + * @param mode specify user and factory + * + * Handle OTP operation. + */ +static int onenand_otp_walk(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf, + otp_op_t action, int mode) +{ + struct onenand_chip *this = mtd->priv; + int otp_pages; + int density; + int ret = 0; + + *retlen = 0; + + density = this->device_id >> ONENAND_DEVICE_DENSITY_SHIFT; + if (density < ONENAND_DEVICE_DENSITY_512Mb) + otp_pages = 20; + else + otp_pages = 10; + + if (mode == MTD_OTP_FACTORY) { + from += mtd->writesize * otp_pages; + otp_pages = 64 - otp_pages; + } + + /* Check User/Factory boundary */ + if (((mtd->writesize * otp_pages) - (from + len)) < 0) + return 0; + + while (len > 0 && otp_pages > 0) { + if (!action) { /* OTP Info functions */ + struct otp_info *otpinfo; + + len -= sizeof(struct otp_info); + if (len <= 0) + return -ENOSPC; + + otpinfo = (struct otp_info *) buf; + otpinfo->start = from; + otpinfo->length = mtd->writesize; + otpinfo->locked = 0; + + from += mtd->writesize; + buf += sizeof(struct otp_info); + *retlen += sizeof(struct otp_info); + } else { + size_t tmp_retlen; + int size = len; + + ret = action(mtd, from, len, &tmp_retlen, buf); + + buf += size; + len -= size; + *retlen += size; + + if (ret < 0) + return ret; + } + otp_pages--; + } + + return 0; +} + +/** + * onenand_get_fact_prot_info - [MTD Interface] Read factory OTP info + * @param mtd MTD device structure + * @param buf the databuffer to put/get data + * @param len number of bytes to read + * + * Read factory OTP info. + */ +static int onenand_get_fact_prot_info(struct mtd_info *mtd, + struct otp_info *buf, size_t len) +{ + size_t retlen; + int ret; + + ret = onenand_otp_walk(mtd, 0, len, &retlen, (u_char *) buf, NULL, MTD_OTP_FACTORY); + + return ret ? : retlen; +} + +/** + * onenand_read_fact_prot_reg - [MTD Interface] Read factory OTP area + * @param mtd MTD device structure + * @param from The offset to read + * @param len number of bytes to read + * @param retlen pointer to variable to store the number of read bytes + * @param buf the databuffer to put/get data + * + * Read factory OTP area. + */ +static int onenand_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf) +{ + return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_read, MTD_OTP_FACTORY); +} + +/** + * onenand_get_user_prot_info - [MTD Interface] Read user OTP info + * @param mtd MTD device structure + * @param buf the databuffer to put/get data + * @param len number of bytes to read + * + * Read user OTP info. + */ +static int onenand_get_user_prot_info(struct mtd_info *mtd, + struct otp_info *buf, size_t len) +{ + size_t retlen; + int ret; + + ret = onenand_otp_walk(mtd, 0, len, &retlen, (u_char *) buf, NULL, MTD_OTP_USER); + + return ret ? : retlen; +} + +/** + * onenand_read_user_prot_reg - [MTD Interface] Read user OTP area + * @param mtd MTD device structure + * @param from The offset to read + * @param len number of bytes to read + * @param retlen pointer to variable to store the number of read bytes + * @param buf the databuffer to put/get data + * + * Read user OTP area. + */ +static int onenand_read_user_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf) +{ + return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_read, MTD_OTP_USER); +} + +/** + * onenand_write_user_prot_reg - [MTD Interface] Write user OTP area + * @param mtd MTD device structure + * @param from The offset to write + * @param len number of bytes to write + * @param retlen pointer to variable to store the number of write bytes + * @param buf the databuffer to put/get data + * + * Write user OTP area. + */ +static int onenand_write_user_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf) +{ + return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_write, MTD_OTP_USER); +} + +/** + * onenand_lock_user_prot_reg - [MTD Interface] Lock user OTP area + * @param mtd MTD device structure + * @param from The offset to lock + * @param len number of bytes to unlock + * + * Write lock mark on spare area in page 0 in OTP block + */ +static int onenand_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len) +{ + unsigned char oob_buf[64]; + size_t retlen; + int ret; + + memset(oob_buf, 0xff, mtd->oobsize); + /* + * Note: OTP lock operation + * OTP block : 0xXXFC + * 1st block : 0xXXF3 (If chip support) + * Both : 0xXXF0 (If chip support) + */ + oob_buf[ONENAND_OTP_LOCK_OFFSET] = 0xFC; + + /* + * Write lock mark to 8th word of sector0 of page0 of the spare0. + * We write 16 bytes spare area instead of 2 bytes. + */ + from = 0; + len = 16; + + ret = onenand_otp_walk(mtd, from, len, &retlen, oob_buf, do_otp_lock, MTD_OTP_USER); + + return ret ? : retlen; +} +#endif /* CONFIG_MTD_ONENAND_OTP */ + /** * onenand_print_device_info - Print device ID * @param device device ID @@ -1423,15 +1662,15 @@ static int onenand_probe(struct mtd_info /* OneNAND page size & block size */ /* The data buffer size is equal to page size */ - mtd->oobblock = this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE); - mtd->oobsize = mtd->oobblock >> 5; + mtd->writesize = this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE); + mtd->oobsize = mtd->writesize >> 5; /* Pagers per block is always 64 in OneNAND */ - mtd->erasesize = mtd->oobblock << 6; + mtd->erasesize = mtd->writesize << 6; this->erase_shift = ffs(mtd->erasesize) - 1; - this->page_shift = ffs(mtd->oobblock) - 1; + this->page_shift = ffs(mtd->writesize) - 1; this->ppb_shift = (this->erase_shift - this->page_shift); - this->page_mask = (mtd->erasesize / mtd->oobblock) - 1; + this->page_mask = (mtd->erasesize / mtd->writesize) - 1; /* REVIST: Multichip handling */ @@ -1475,7 +1714,6 @@ static void onenand_resume(struct mtd_in "in suspended state\n"); } - /** * onenand_scan - [OneNAND Interface] Scan for the OneNAND device * @param mtd MTD device structure @@ -1522,7 +1760,7 @@ int onenand_scan(struct mtd_info *mtd, i /* Allocate buffers, if necessary */ if (!this->page_buf) { size_t len; - len = mtd->oobblock + mtd->oobsize; + len = mtd->writesize + mtd->oobsize; this->page_buf = kmalloc(len, GFP_KERNEL); if (!this->page_buf) { printk(KERN_ERR "onenand_scan(): Can't allocate page_buf\n"); @@ -1537,40 +1775,42 @@ int onenand_scan(struct mtd_info *mtd, i switch (mtd->oobsize) { case 64: - this->autooob = &onenand_oob_64; + this->ecclayout = &onenand_oob_64; break; case 32: - this->autooob = &onenand_oob_32; + this->ecclayout = &onenand_oob_32; break; default: printk(KERN_WARNING "No OOB scheme defined for oobsize %d\n", mtd->oobsize); /* To prevent kernel oops */ - this->autooob = &onenand_oob_32; + this->ecclayout = &onenand_oob_32; break; } - memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo)); + mtd->ecclayout = this->ecclayout; /* Fill in remaining MTD driver data */ mtd->type = MTD_NANDFLASH; - mtd->flags = MTD_CAP_NANDFLASH | MTD_ECC; + mtd->flags = MTD_CAP_NANDFLASH; mtd->ecctype = MTD_ECC_SW; mtd->erase = onenand_erase; mtd->point = NULL; mtd->unpoint = NULL; mtd->read = onenand_read; mtd->write = onenand_write; - mtd->read_ecc = onenand_read_ecc; - mtd->write_ecc = onenand_write_ecc; mtd->read_oob = onenand_read_oob; mtd->write_oob = onenand_write_oob; - mtd->readv = NULL; - mtd->readv_ecc = NULL; - mtd->writev = onenand_writev; - mtd->writev_ecc = onenand_writev_ecc; +#ifdef CONFIG_MTD_ONENAND_OTP + mtd->get_fact_prot_info = onenand_get_fact_prot_info; + mtd->read_fact_prot_reg = onenand_read_fact_prot_reg; + mtd->get_user_prot_info = onenand_get_user_prot_info; + mtd->read_user_prot_reg = onenand_read_user_prot_reg; + mtd->write_user_prot_reg = onenand_write_user_prot_reg; + mtd->lock_user_prot_reg = onenand_lock_user_prot_reg; +#endif mtd->sync = onenand_sync; mtd->lock = NULL; mtd->unlock = onenand_unlock; diff -puN drivers/mtd/onenand/onenand_bbt.c~git-mtd drivers/mtd/onenand/onenand_bbt.c --- devel/drivers/mtd/onenand/onenand_bbt.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/onenand/onenand_bbt.c 2006-05-29 15:02:34.000000000 -0700 @@ -17,6 +17,9 @@ #include #include +extern int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf); + /** * check_short_pattern - [GENERIC] check if a pattern is in the buffer * @param buf the buffer to search @@ -87,13 +90,13 @@ static int create_bbt(struct mtd_info *m /* No need to read pages fully, * just read required OOB bytes */ - ret = mtd->read_oob(mtd, from + j * mtd->oobblock + bd->offs, - readlen, &retlen, &buf[0]); + ret = onenand_do_read_oob(mtd, from + j * mtd->writesize + bd->offs, + readlen, &retlen, &buf[0]); if (ret) return ret; - if (check_short_pattern(&buf[j * scanlen], scanlen, mtd->oobblock, bd)) { + if (check_short_pattern(&buf[j * scanlen], scanlen, mtd->writesize, bd)) { bbm->bbt[i >> 3] |= 0x03 << (i & 0x6); printk(KERN_WARNING "Bad eraseblock %d at 0x%08x\n", i >> 1, (unsigned int) from); diff -puN drivers/mtd/redboot.c~git-mtd drivers/mtd/redboot.c --- devel/drivers/mtd/redboot.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/redboot.c 2006-05-29 15:02:34.000000000 -0700 @@ -1,5 +1,5 @@ /* - * $Id: redboot.c,v 1.19 2005/12/01 10:03:51 dwmw2 Exp $ + * $Id: redboot.c,v 1.21 2006/03/30 18:34:37 bjd Exp $ * * Parse RedBoot-style Flash Image System (FIS) tables and * produce a Linux partition array to match. @@ -15,14 +15,14 @@ struct fis_image_desc { unsigned char name[16]; // Null terminated name - unsigned long flash_base; // Address within FLASH of image - unsigned long mem_base; // Address in memory where it executes - unsigned long size; // Length of image - unsigned long entry_point; // Execution entry point - unsigned long data_length; // Length of actual data - unsigned char _pad[256-(16+7*sizeof(unsigned long))]; - unsigned long desc_cksum; // Checksum over image descriptor - unsigned long file_cksum; // Checksum over image data + uint32_t flash_base; // Address within FLASH of image + uint32_t mem_base; // Address in memory where it executes + uint32_t size; // Length of image + uint32_t entry_point; // Execution entry point + uint32_t data_length; // Length of actual data + unsigned char _pad[256-(16+7*sizeof(uint32_t))]; + uint32_t desc_cksum; // Checksum over image descriptor + uint32_t file_cksum; // Checksum over image data }; struct fis_list { diff -puN drivers/mtd/rfd_ftl.c~git-mtd drivers/mtd/rfd_ftl.c --- devel/drivers/mtd/rfd_ftl.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/drivers/mtd/rfd_ftl.c 2006-05-29 15:02:34.000000000 -0700 @@ -3,7 +3,7 @@ * * Copyright (C) 2005 Sean Young * - * $Id: rfd_ftl.c,v 1.5 2005/11/07 11:14:21 gleixner Exp $ + * $Id: rfd_ftl.c,v 1.8 2006/01/15 12:51:44 sean Exp $ * * This type of flash translation layer (FTL) is used by the Embedded BIOS * by General Software. It is known as the Resident Flash Disk (RFD), see: @@ -61,6 +61,7 @@ struct block { BLOCK_OK, BLOCK_ERASING, BLOCK_ERASED, + BLOCK_UNUSED, BLOCK_FAILED } state; int free_sectors; @@ -99,10 +100,8 @@ static int build_block_map(struct partit block->offset = part->block_size * block_no; if (le16_to_cpu(part->header_cache[0]) != RFD_MAGIC) { - block->state = BLOCK_ERASED; /* assumption */ - block->free_sectors = part->data_sectors_per_block; - part->reserved_block = block_no; - return 1; + block->state = BLOCK_UNUSED; + return -ENOENT; } block->state = BLOCK_OK; @@ -124,7 +123,7 @@ static int build_block_map(struct partit entry = 0; if (entry >= part->sector_count) { - printk(KERN_NOTICE PREFIX + printk(KERN_WARNING PREFIX "'%s': unit #%d: entry %d corrupt, " "sector %d out of range\n", part->mbd.mtd->name, block_no, i, entry); @@ -132,7 +131,7 @@ static int build_block_map(struct partit } if (part->sector_map[entry] != -1) { - printk(KERN_NOTICE PREFIX + printk(KERN_WARNING PREFIX "'%s': more than one entry for sector %d\n", part->mbd.mtd->name, entry); part->errors = 1; @@ -167,7 +166,7 @@ static int scan_header(struct partition /* each erase block has three bytes header, followed by the map */ part->header_sectors_per_block = ((HEADER_MAP_OFFSET + sectors_per_block) * - sizeof(u16) + SECTOR_SIZE - 1) / SECTOR_SIZE; + sizeof(u16) + SECTOR_SIZE - 1) / SECTOR_SIZE; part->data_sectors_per_block = sectors_per_block - part->header_sectors_per_block; @@ -226,7 +225,7 @@ static int scan_header(struct partition } if (part->reserved_block == -1) { - printk(KERN_NOTICE PREFIX "'%s': no empty erase unit found\n", + printk(KERN_WARNING PREFIX "'%s': no empty erase unit found\n", part->mbd.mtd->name); part->errors = 1; @@ -315,7 +314,7 @@ static void erase_callback(struct erase_ rc = -EIO; if (rc) { - printk(KERN_NOTICE PREFIX "'%s': unable to write RFD " + printk(KERN_ERR PREFIX "'%s': unable to write RFD " "header at 0x%lx\n", part->mbd.mtd->name, part->blocks[i].offset); @@ -348,7 +347,7 @@ static int erase_block(struct partition rc = part->mbd.mtd->erase(part->mbd.mtd, erase); if (rc) { - printk(KERN_WARNING PREFIX "erase of region %x,%x on '%s' " + printk(KERN_ERR PREFIX "erase of region %x,%x on '%s' " "failed\n", erase->addr, erase->len, part->mbd.mtd->name); kfree(erase); @@ -383,7 +382,7 @@ static int move_block_contents(struct pa rc = -EIO; if (rc) { - printk(KERN_NOTICE PREFIX "error reading '%s' at " + printk(KERN_ERR PREFIX "error reading '%s' at " "0x%lx\n", part->mbd.mtd->name, part->blocks[block_no].offset); @@ -423,7 +422,7 @@ static int move_block_contents(struct pa rc = -EIO; if (rc) { - printk(KERN_NOTICE PREFIX "'%s': Unable to " + printk(KERN_ERR PREFIX "'%s': Unable to " "read sector for relocation\n", part->mbd.mtd->name); @@ -520,7 +519,7 @@ static int reclaim_block(struct partitio * because if we fill that one up first it'll have the most chance of having * the least live sectors at reclaim. */ -static int find_free_block(const struct partition *part) +static int find_free_block(struct partition *part) { int block, stop; @@ -533,6 +532,9 @@ static int find_free_block(const struct block != part->reserved_block) return block; + if (part->blocks[block].state == BLOCK_UNUSED) + erase_block(part, block); + if (++block >= part->total_blocks) block = 0; @@ -541,7 +543,7 @@ static int find_free_block(const struct return -1; } -static int find_writeable_block(struct partition *part, u_long *old_sector) +static int find_writable_block(struct partition *part, u_long *old_sector) { int rc, block; size_t retlen; @@ -570,7 +572,7 @@ static int find_writeable_block(struct p rc = -EIO; if (rc) { - printk(KERN_NOTICE PREFIX "'%s': unable to read header at " + printk(KERN_ERR PREFIX "'%s': unable to read header at " "0x%lx\n", part->mbd.mtd->name, part->blocks[block].offset); goto err; @@ -602,7 +604,7 @@ static int mark_sector_deleted(struct pa rc = -EIO; if (rc) { - printk(KERN_WARNING PREFIX "error writing '%s' at " + printk(KERN_ERR PREFIX "error writing '%s' at " "0x%lx\n", part->mbd.mtd->name, addr); if (rc) goto err; @@ -652,7 +654,7 @@ static int do_writesect(struct mtd_blktr if (part->current_block == -1 || !part->blocks[part->current_block].free_sectors) { - rc = find_writeable_block(part, old_addr); + rc = find_writable_block(part, old_addr); if (rc) goto err; } @@ -675,7 +677,7 @@ static int do_writesect(struct mtd_blktr rc = -EIO; if (rc) { - printk(KERN_WARNING PREFIX "error writing '%s' at 0x%lx\n", + printk(KERN_ERR PREFIX "error writing '%s' at 0x%lx\n", part->mbd.mtd->name, addr); if (rc) goto err; @@ -695,7 +697,7 @@ static int do_writesect(struct mtd_blktr rc = -EIO; if (rc) { - printk(KERN_WARNING PREFIX "error writing '%s' at 0x%lx\n", + printk(KERN_ERR PREFIX "error writing '%s' at 0x%lx\n", part->mbd.mtd->name, addr); if (rc) goto err; @@ -776,7 +778,7 @@ static void rfd_ftl_add_mtd(struct mtd_b part->block_size = block_size; else { if (!mtd->erasesize) { - printk(KERN_NOTICE PREFIX "please provide block_size"); + printk(KERN_WARNING PREFIX "please provide block_size"); return; } else @@ -791,8 +793,8 @@ static void rfd_ftl_add_mtd(struct mtd_b if (!(mtd->flags & MTD_WRITEABLE)) part->mbd.readonly = 1; else if (part->errors) { - printk(KERN_NOTICE PREFIX "'%s': errors found, " - "setting read-only", mtd->name); + printk(KERN_WARNING PREFIX "'%s': errors found, " + "setting read-only\n", mtd->name); part->mbd.readonly = 1; } diff -puN /dev/null fs/jffs2/acl.c --- /dev/null 2006-05-29 10:18:53.280907750 -0700 +++ devel-akpm/fs/jffs2/acl.c 2006-05-29 15:02:34.000000000 -0700 @@ -0,0 +1,485 @@ +/* + * JFFS2 -- Journalling Flash File System, Version 2. + * + * Copyright (C) 2006 NEC Corporation + * + * Created by KaiGai Kohei + * + * For licensing information, see the file 'LICENCE' in this directory. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "nodelist.h" + +static size_t jffs2_acl_size(int count) +{ + if (count <= 4) { + return sizeof(struct jffs2_acl_header) + + count * sizeof(struct jffs2_acl_entry_short); + } else { + return sizeof(struct jffs2_acl_header) + + 4 * sizeof(struct jffs2_acl_entry_short) + + (count - 4) * sizeof(struct jffs2_acl_entry); + } +} + +static int jffs2_acl_count(size_t size) +{ + size_t s; + + size -= sizeof(struct jffs2_acl_header); + s = size - 4 * sizeof(struct jffs2_acl_entry_short); + if (s < 0) { + if (size % sizeof(struct jffs2_acl_entry_short)) + return -1; + return size / sizeof(struct jffs2_acl_entry_short); + } else { + if (s % sizeof(struct jffs2_acl_entry)) + return -1; + return s / sizeof(struct jffs2_acl_entry) + 4; + } +} + +static struct posix_acl *jffs2_acl_from_medium(void *value, size_t size) +{ + void *end = value + size; + struct jffs2_acl_header *header = value; + struct jffs2_acl_entry *entry; + struct posix_acl *acl; + uint32_t ver; + int i, count; + + if (!value) + return NULL; + if (size < sizeof(struct jffs2_acl_header)) + return ERR_PTR(-EINVAL); + ver = je32_to_cpu(header->a_version); + if (ver != JFFS2_ACL_VERSION) { + JFFS2_WARNING("Invalid ACL version. (=%u)\n", ver); + return ERR_PTR(-EINVAL); + } + + value += sizeof(struct jffs2_acl_header); + count = jffs2_acl_count(size); + if (count < 0) + return ERR_PTR(-EINVAL); + if (count == 0) + return NULL; + + acl = posix_acl_alloc(count, GFP_KERNEL); + if (!acl) + return ERR_PTR(-ENOMEM); + + for (i=0; i < count; i++) { + entry = value; + if (value + sizeof(struct jffs2_acl_entry_short) > end) + goto fail; + acl->a_entries[i].e_tag = je16_to_cpu(entry->e_tag); + acl->a_entries[i].e_perm = je16_to_cpu(entry->e_perm); + switch (acl->a_entries[i].e_tag) { + case ACL_USER_OBJ: + case ACL_GROUP_OBJ: + case ACL_MASK: + case ACL_OTHER: + value += sizeof(struct jffs2_acl_entry_short); + acl->a_entries[i].e_id = ACL_UNDEFINED_ID; + break; + + case ACL_USER: + case ACL_GROUP: + value += sizeof(struct jffs2_acl_entry); + if (value > end) + goto fail; + acl->a_entries[i].e_id = je32_to_cpu(entry->e_id); + break; + + default: + goto fail; + } + } + if (value != end) + goto fail; + return acl; + fail: + posix_acl_release(acl); + return ERR_PTR(-EINVAL); +} + +static void *jffs2_acl_to_medium(const struct posix_acl *acl, size_t *size) +{ + struct jffs2_acl_header *header; + struct jffs2_acl_entry *entry; + void *e; + size_t i; + + *size = jffs2_acl_size(acl->a_count); + header = kmalloc(sizeof(*header) + acl->a_count * sizeof(*entry), GFP_KERNEL); + if (!header) + return ERR_PTR(-ENOMEM); + header->a_version = cpu_to_je32(JFFS2_ACL_VERSION); + e = header + 1; + for (i=0; i < acl->a_count; i++) { + entry = e; + entry->e_tag = cpu_to_je16(acl->a_entries[i].e_tag); + entry->e_perm = cpu_to_je16(acl->a_entries[i].e_perm); + switch(acl->a_entries[i].e_tag) { + case ACL_USER: + case ACL_GROUP: + entry->e_id = cpu_to_je32(acl->a_entries[i].e_id); + e += sizeof(struct jffs2_acl_entry); + break; + + case ACL_USER_OBJ: + case ACL_GROUP_OBJ: + case ACL_MASK: + case ACL_OTHER: + e += sizeof(struct jffs2_acl_entry_short); + break; + + default: + goto fail; + } + } + return header; + fail: + kfree(header); + return ERR_PTR(-EINVAL); +} + +static struct posix_acl *jffs2_iget_acl(struct inode *inode, struct posix_acl **i_acl) +{ + struct posix_acl *acl = JFFS2_ACL_NOT_CACHED; + + spin_lock(&inode->i_lock); + if (*i_acl != JFFS2_ACL_NOT_CACHED) + acl = posix_acl_dup(*i_acl); + spin_unlock(&inode->i_lock); + return acl; +} + +static void jffs2_iset_acl(struct inode *inode, struct posix_acl **i_acl, struct posix_acl *acl) +{ + spin_lock(&inode->i_lock); + if (*i_acl != JFFS2_ACL_NOT_CACHED) + posix_acl_release(*i_acl); + *i_acl = posix_acl_dup(acl); + spin_unlock(&inode->i_lock); +} + +static struct posix_acl *jffs2_get_acl(struct inode *inode, int type) +{ + struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode); + struct posix_acl *acl; + char *value = NULL; + int rc, xprefix; + + switch (type) { + case ACL_TYPE_ACCESS: + acl = jffs2_iget_acl(inode, &f->i_acl_access); + if (acl != JFFS2_ACL_NOT_CACHED) + return acl; + xprefix = JFFS2_XPREFIX_ACL_ACCESS; + break; + case ACL_TYPE_DEFAULT: + acl = jffs2_iget_acl(inode, &f->i_acl_default); + if (acl != JFFS2_ACL_NOT_CACHED) + return acl; + xprefix = JFFS2_XPREFIX_ACL_DEFAULT; + break; + default: + return ERR_PTR(-EINVAL); + } + rc = do_jffs2_getxattr(inode, xprefix, "", NULL, 0); + if (rc > 0) { + value = kmalloc(rc, GFP_KERNEL); + if (!value) + return ERR_PTR(-ENOMEM); + rc = do_jffs2_getxattr(inode, xprefix, "", value, rc); + } + if (rc > 0) { + acl = jffs2_acl_from_medium(value, rc); + } else if (rc == -ENODATA || rc == -ENOSYS) { + acl = NULL; + } else { + acl = ERR_PTR(rc); + } + if (value) + kfree(value); + if (!IS_ERR(acl)) { + switch (type) { + case ACL_TYPE_ACCESS: + jffs2_iset_acl(inode, &f->i_acl_access, acl); + break; + case ACL_TYPE_DEFAULT: + jffs2_iset_acl(inode, &f->i_acl_default, acl); + break; + } + } + return acl; +} + +static int jffs2_set_acl(struct inode *inode, int type, struct posix_acl *acl) +{ + struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode); + size_t size = 0; + char *value = NULL; + int rc, xprefix; + + if (S_ISLNK(inode->i_mode)) + return -EOPNOTSUPP; + + switch (type) { + case ACL_TYPE_ACCESS: + xprefix = JFFS2_XPREFIX_ACL_ACCESS; + if (acl) { + mode_t mode = inode->i_mode; + rc = posix_acl_equiv_mode(acl, &mode); + if (rc < 0) + return rc; + if (inode->i_mode != mode) { + inode->i_mode = mode; + jffs2_dirty_inode(inode); + } + if (rc == 0) + acl = NULL; + } + break; + case ACL_TYPE_DEFAULT: + xprefix = JFFS2_XPREFIX_ACL_DEFAULT; + if (!S_ISDIR(inode->i_mode)) + return acl ? -EACCES : 0; + break; + default: + return -EINVAL; + } + if (acl) { + value = jffs2_acl_to_medium(acl, &size); + if (IS_ERR(value)) + return PTR_ERR(value); + } + + rc = do_jffs2_setxattr(inode, xprefix, "", value, size, 0); + if (value) + kfree(value); + if (!rc) { + switch(type) { + case ACL_TYPE_ACCESS: + jffs2_iset_acl(inode, &f->i_acl_access, acl); + break; + case ACL_TYPE_DEFAULT: + jffs2_iset_acl(inode, &f->i_acl_default, acl); + break; + } + } + return rc; +} + +static int jffs2_check_acl(struct inode *inode, int mask) +{ + struct posix_acl *acl; + int rc; + + acl = jffs2_get_acl(inode, ACL_TYPE_ACCESS); + if (IS_ERR(acl)) + return PTR_ERR(acl); + if (acl) { + rc = posix_acl_permission(inode, acl, mask); + posix_acl_release(acl); + return rc; + } + return -EAGAIN; +} + +int jffs2_permission(struct inode *inode, int mask, struct nameidata *nd) +{ + return generic_permission(inode, mask, jffs2_check_acl); +} + +int jffs2_init_acl(struct inode *inode, struct inode *dir) +{ + struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode); + struct posix_acl *acl = NULL, *clone; + mode_t mode; + int rc = 0; + + f->i_acl_access = JFFS2_ACL_NOT_CACHED; + f->i_acl_default = JFFS2_ACL_NOT_CACHED; + if (!S_ISLNK(inode->i_mode)) { + acl = jffs2_get_acl(dir, ACL_TYPE_DEFAULT); + if (IS_ERR(acl)) + return PTR_ERR(acl); + if (!acl) + inode->i_mode &= ~current->fs->umask; + } + if (acl) { + if (S_ISDIR(inode->i_mode)) { + rc = jffs2_set_acl(inode, ACL_TYPE_DEFAULT, acl); + if (rc) + goto cleanup; + } + clone = posix_acl_clone(acl, GFP_KERNEL); + rc = -ENOMEM; + if (!clone) + goto cleanup; + mode = inode->i_mode; + rc = posix_acl_create_masq(clone, &mode); + if (rc >= 0) { + inode->i_mode = mode; + if (rc > 0) + rc = jffs2_set_acl(inode, ACL_TYPE_ACCESS, clone); + } + posix_acl_release(clone); + } + cleanup: + posix_acl_release(acl); + return rc; +} + +void jffs2_clear_acl(struct inode *inode) +{ + struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode); + + if (f->i_acl_access && f->i_acl_access != JFFS2_ACL_NOT_CACHED) { + posix_acl_release(f->i_acl_access); + f->i_acl_access = JFFS2_ACL_NOT_CACHED; + } + if (f->i_acl_default && f->i_acl_default != JFFS2_ACL_NOT_CACHED) { + posix_acl_release(f->i_acl_default); + f->i_acl_default = JFFS2_ACL_NOT_CACHED; + } +} + +int jffs2_acl_chmod(struct inode *inode) +{ + struct posix_acl *acl, *clone; + int rc; + + if (S_ISLNK(inode->i_mode)) + return -EOPNOTSUPP; + acl = jffs2_get_acl(inode, ACL_TYPE_ACCESS); + if (IS_ERR(acl) || !acl) + return PTR_ERR(acl); + clone = posix_acl_clone(acl, GFP_KERNEL); + posix_acl_release(acl); + if (!clone) + return -ENOMEM; + rc = posix_acl_chmod_masq(clone, inode->i_mode); + if (!rc) + rc = jffs2_set_acl(inode, ACL_TYPE_ACCESS, clone); + posix_acl_release(clone); + return rc; +} + +static size_t jffs2_acl_access_listxattr(struct inode *inode, char *list, size_t list_size, + const char *name, size_t name_len) +{ + const int retlen = sizeof(POSIX_ACL_XATTR_ACCESS); + + if (list && retlen <= list_size) + strcpy(list, POSIX_ACL_XATTR_ACCESS); + return retlen; +} + +static size_t jffs2_acl_default_listxattr(struct inode *inode, char *list, size_t list_size, + const char *name, size_t name_len) +{ + const int retlen = sizeof(POSIX_ACL_XATTR_DEFAULT); + + if (list && retlen <= list_size) + strcpy(list, POSIX_ACL_XATTR_DEFAULT); + return retlen; +} + +static int jffs2_acl_getxattr(struct inode *inode, int type, void *buffer, size_t size) +{ + struct posix_acl *acl; + int rc; + + acl = jffs2_get_acl(inode, type); + if (IS_ERR(acl)) + return PTR_ERR(acl); + if (!acl) + return -ENODATA; + rc = posix_acl_to_xattr(acl, buffer, size); + posix_acl_release(acl); + + return rc; +} + +static int jffs2_acl_access_getxattr(struct inode *inode, const char *name, void *buffer, size_t size) +{ + if (name[0] != '\0') + return -EINVAL; + return jffs2_acl_getxattr(inode, ACL_TYPE_ACCESS, buffer, size); +} + +static int jffs2_acl_default_getxattr(struct inode *inode, const char *name, void *buffer, size_t size) +{ + if (name[0] != '\0') + return -EINVAL; + return jffs2_acl_getxattr(inode, ACL_TYPE_DEFAULT, buffer, size); +} + +static int jffs2_acl_setxattr(struct inode *inode, int type, const void *value, size_t size) +{ + struct posix_acl *acl; + int rc; + + if ((current->fsuid != inode->i_uid) && !capable(CAP_FOWNER)) + return -EPERM; + + if (value) { + acl = posix_acl_from_xattr(value, size); + if (IS_ERR(acl)) + return PTR_ERR(acl); + if (acl) { + rc = posix_acl_valid(acl); + if (rc) + goto out; + } + } else { + acl = NULL; + } + rc = jffs2_set_acl(inode, type, acl); + out: + posix_acl_release(acl); + return rc; +} + +static int jffs2_acl_access_setxattr(struct inode *inode, const char *name, + const void *buffer, size_t size, int flags) +{ + if (name[0] != '\0') + return -EINVAL; + return jffs2_acl_setxattr(inode, ACL_TYPE_ACCESS, buffer, size); +} + +static int jffs2_acl_default_setxattr(struct inode *inode, const char *name, + const void *buffer, size_t size, int flags) +{ + if (name[0] != '\0') + return -EINVAL; + return jffs2_acl_setxattr(inode, ACL_TYPE_DEFAULT, buffer, size); +} + +struct xattr_handler jffs2_acl_access_xattr_handler = { + .prefix = POSIX_ACL_XATTR_ACCESS, + .list = jffs2_acl_access_listxattr, + .get = jffs2_acl_access_getxattr, + .set = jffs2_acl_access_setxattr, +}; + +struct xattr_handler jffs2_acl_default_xattr_handler = { + .prefix = POSIX_ACL_XATTR_DEFAULT, + .list = jffs2_acl_default_listxattr, + .get = jffs2_acl_default_getxattr, + .set = jffs2_acl_default_setxattr, +}; diff -puN /dev/null fs/jffs2/acl.h --- /dev/null 2006-05-29 10:18:53.280907750 -0700 +++ devel-akpm/fs/jffs2/acl.h 2006-05-29 15:02:34.000000000 -0700 @@ -0,0 +1,45 @@ +/* + * JFFS2 -- Journalling Flash File System, Version 2. + * + * Copyright (C) 2006 NEC Corporation + * + * Created by KaiGai Kohei + * + * For licensing information, see the file 'LICENCE' in this directory. + * + */ +struct jffs2_acl_entry { + jint16_t e_tag; + jint16_t e_perm; + jint32_t e_id; +}; + +struct jffs2_acl_entry_short { + jint16_t e_tag; + jint16_t e_perm; +}; + +struct jffs2_acl_header { + jint32_t a_version; +}; + +#ifdef CONFIG_JFFS2_FS_POSIX_ACL + +#define JFFS2_ACL_NOT_CACHED ((void *)-1) + +extern int jffs2_permission(struct inode *, int, struct nameidata *); +extern int jffs2_acl_chmod(struct inode *); +extern int jffs2_init_acl(struct inode *, struct inode *); +extern void jffs2_clear_acl(struct inode *); + +extern struct xattr_handler jffs2_acl_access_xattr_handler; +extern struct xattr_handler jffs2_acl_default_xattr_handler; + +#else + +#define jffs2_permission NULL +#define jffs2_acl_chmod(inode) (0) +#define jffs2_init_acl(inode,dir) (0) +#define jffs2_clear_acl(inode) + +#endif /* CONFIG_JFFS2_FS_POSIX_ACL */ diff -puN fs/jffs2/build.c~git-mtd fs/jffs2/build.c --- devel/fs/jffs2/build.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs2/build.c 2006-05-29 15:02:34.000000000 -0700 @@ -160,6 +160,7 @@ static int jffs2_build_filesystem(struct ic->scan_dents = NULL; cond_resched(); } + jffs2_build_xattr_subsystem(c); c->flags &= ~JFFS2_SB_FLAG_BUILDING; dbg_fsbuild("FS build complete\n"); @@ -178,6 +179,7 @@ exit: jffs2_free_full_dirent(fd); } } + jffs2_clear_xattr_subsystem(c); } return ret; diff -puN fs/jffs2/compr.c~git-mtd fs/jffs2/compr.c --- devel/fs/jffs2/compr.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs2/compr.c 2006-05-29 15:02:34.000000000 -0700 @@ -412,7 +412,7 @@ void jffs2_free_comprbuf(unsigned char * kfree(comprbuf); } -int jffs2_compressors_init(void) +int __init jffs2_compressors_init(void) { /* Registering compressors */ #ifdef CONFIG_JFFS2_ZLIB @@ -440,7 +440,7 @@ int jffs2_compressors_init(void) return 0; } -int jffs2_compressors_exit(void) +int __exit jffs2_compressors_exit(void) { /* Unregistering compressors */ #ifdef CONFIG_JFFS2_RUBIN diff -puN fs/jffs2/compr.h~git-mtd fs/jffs2/compr.h --- devel/fs/jffs2/compr.h~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs2/compr.h 2006-05-29 15:02:34.000000000 -0700 @@ -23,8 +23,8 @@ #include #include #include -#include -#include +#include "jffs2_fs_i.h" +#include "jffs2_fs_sb.h" #include "nodelist.h" #define JFFS2_RUBINMIPS_PRIORITY 10 diff -puN fs/jffs2/compr_zlib.c~git-mtd fs/jffs2/compr_zlib.c --- devel/fs/jffs2/compr_zlib.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs2/compr_zlib.c 2006-05-29 15:02:34.000000000 -0700 @@ -60,7 +60,7 @@ static int __init alloc_workspaces(void) return 0; } -static void free_workspaces(void) +static void __exit free_workspaces(void) { vfree(def_strm.workspace); vfree(inf_strm.workspace); @@ -216,7 +216,7 @@ int __init jffs2_zlib_init(void) return ret; } -void jffs2_zlib_exit(void) +void __exit jffs2_zlib_exit(void) { jffs2_unregister_compressor(&jffs2_zlib_comp); free_workspaces(); diff -puN fs/jffs2/debug.c~git-mtd fs/jffs2/debug.c --- devel/fs/jffs2/debug.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs2/debug.c 2006-05-29 15:02:34.000000000 -0700 @@ -192,13 +192,13 @@ __jffs2_dbg_acct_paranoia_check_nolock(s else my_dirty_size += totlen; - if ((!ref2->next_phys) != (ref2 == jeb->last_node)) { - JFFS2_ERROR("node_ref for node at %#08x (mem %p) has next_phys at %#08x (mem %p), last_node is at %#08x (mem %p).\n", - ref_offset(ref2), ref2, ref_offset(ref2->next_phys), ref2->next_phys, - ref_offset(jeb->last_node), jeb->last_node); + if ((!ref_next(ref2)) != (ref2 == jeb->last_node)) { + JFFS2_ERROR("node_ref for node at %#08x (mem %p) has next at %#08x (mem %p), last_node is at %#08x (mem %p).\n", + ref_offset(ref2), ref2, ref_offset(ref_next(ref2)), ref_next(ref2), + ref_offset(jeb->last_node), jeb->last_node); goto error; } - ref2 = ref2->next_phys; + ref2 = ref_next(ref2); } if (my_used_size != jeb->used_size) { @@ -268,9 +268,9 @@ __jffs2_dbg_dump_node_refs_nolock(struct } printk(JFFS2_DBG); - for (ref = jeb->first_node; ; ref = ref->next_phys) { + for (ref = jeb->first_node; ; ref = ref_next(ref)) { printk("%#08x(%#x)", ref_offset(ref), ref->__totlen); - if (ref->next_phys) + if (ref_next(ref)) printk("->"); else break; diff -puN fs/jffs2/debug.h~git-mtd fs/jffs2/debug.h --- devel/fs/jffs2/debug.h~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs2/debug.h 2006-05-29 15:02:34.000000000 -0700 @@ -171,6 +171,12 @@ #define dbg_memalloc(fmt, ...) #endif +/* Watch the XATTR subsystem */ +#ifdef JFFS2_DBG_XATTR_MESSAGES +#define dbg_xattr(fmt, ...) JFFS2_DEBUG(fmt, ##__VA_ARGS__) +#else +#define dbg_xattr(fmt, ...) +#endif /* "Sanity" checks */ void diff -puN fs/jffs2/dir.c~git-mtd fs/jffs2/dir.c --- devel/fs/jffs2/dir.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs2/dir.c 2006-05-29 15:02:34.000000000 -0700 @@ -17,8 +17,8 @@ #include #include #include -#include -#include +#include "jffs2_fs_i.h" +#include "jffs2_fs_sb.h" #include #include "nodelist.h" @@ -57,7 +57,12 @@ struct inode_operations jffs2_dir_inode_ .rmdir = jffs2_rmdir, .mknod = jffs2_mknod, .rename = jffs2_rename, + .permission = jffs2_permission, .setattr = jffs2_setattr, + .setxattr = jffs2_setxattr, + .getxattr = jffs2_getxattr, + .listxattr = jffs2_listxattr, + .removexattr = jffs2_removexattr }; /***********************************************************************/ @@ -78,6 +83,9 @@ static struct dentry *jffs2_lookup(struc D1(printk(KERN_DEBUG "jffs2_lookup()\n")); + if (target->d_name.len > JFFS2_MAX_NAME_LEN) + return ERR_PTR(-ENAMETOOLONG); + dir_f = JFFS2_INODE_INFO(dir_i); c = JFFS2_SB_INFO(dir_i->i_sb); @@ -206,12 +214,15 @@ static int jffs2_create(struct inode *di ret = jffs2_do_create(c, dir_f, f, ri, dentry->d_name.name, dentry->d_name.len); - if (ret) { - make_bad_inode(inode); - iput(inode); - jffs2_free_raw_inode(ri); - return ret; - } + if (ret) + goto fail; + + ret = jffs2_init_security(inode, dir_i); + if (ret) + goto fail; + ret = jffs2_init_acl(inode, dir_i); + if (ret) + goto fail; dir_i->i_mtime = dir_i->i_ctime = ITIME(je32_to_cpu(ri->ctime)); @@ -221,6 +232,12 @@ static int jffs2_create(struct inode *di D1(printk(KERN_DEBUG "jffs2_create: Created ino #%lu with mode %o, nlink %d(%d). nrpages %ld\n", inode->i_ino, inode->i_mode, inode->i_nlink, f->inocache->nlink, inode->i_mapping->nrpages)); return 0; + + fail: + make_bad_inode(inode); + iput(inode); + jffs2_free_raw_inode(ri); + return ret; } /***********************************************************************/ @@ -291,7 +308,7 @@ static int jffs2_symlink (struct inode * struct jffs2_full_dnode *fn; struct jffs2_full_dirent *fd; int namelen; - uint32_t alloclen, phys_ofs; + uint32_t alloclen; int ret, targetlen = strlen(target); /* FIXME: If you care. We'd need to use frags for the target @@ -310,8 +327,8 @@ static int jffs2_symlink (struct inode * * Just the node will do for now, though */ namelen = dentry->d_name.len; - ret = jffs2_reserve_space(c, sizeof(*ri) + targetlen, &phys_ofs, &alloclen, - ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE); + ret = jffs2_reserve_space(c, sizeof(*ri) + targetlen, &alloclen, + ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE); if (ret) { jffs2_free_raw_inode(ri); @@ -339,7 +356,7 @@ static int jffs2_symlink (struct inode * ri->data_crc = cpu_to_je32(crc32(0, target, targetlen)); ri->node_crc = cpu_to_je32(crc32(0, ri, sizeof(*ri)-8)); - fn = jffs2_write_dnode(c, f, ri, target, targetlen, phys_ofs, ALLOC_NORMAL); + fn = jffs2_write_dnode(c, f, ri, target, targetlen, ALLOC_NORMAL); jffs2_free_raw_inode(ri); @@ -371,8 +388,20 @@ static int jffs2_symlink (struct inode * up(&f->sem); jffs2_complete_reservation(c); - ret = jffs2_reserve_space(c, sizeof(*rd)+namelen, &phys_ofs, &alloclen, - ALLOC_NORMAL, JFFS2_SUMMARY_DIRENT_SIZE(namelen)); + + ret = jffs2_init_security(inode, dir_i); + if (ret) { + jffs2_clear_inode(inode); + return ret; + } + ret = jffs2_init_acl(inode, dir_i); + if (ret) { + jffs2_clear_inode(inode); + return ret; + } + + ret = jffs2_reserve_space(c, sizeof(*rd)+namelen, &alloclen, + ALLOC_NORMAL, JFFS2_SUMMARY_DIRENT_SIZE(namelen)); if (ret) { /* Eep. */ jffs2_clear_inode(inode); @@ -404,7 +433,7 @@ static int jffs2_symlink (struct inode * rd->node_crc = cpu_to_je32(crc32(0, rd, sizeof(*rd)-8)); rd->name_crc = cpu_to_je32(crc32(0, dentry->d_name.name, namelen)); - fd = jffs2_write_dirent(c, dir_f, rd, dentry->d_name.name, namelen, phys_ofs, ALLOC_NORMAL); + fd = jffs2_write_dirent(c, dir_f, rd, dentry->d_name.name, namelen, ALLOC_NORMAL); if (IS_ERR(fd)) { /* dirent failed to write. Delete the inode normally @@ -442,7 +471,7 @@ static int jffs2_mkdir (struct inode *di struct jffs2_full_dnode *fn; struct jffs2_full_dirent *fd; int namelen; - uint32_t alloclen, phys_ofs; + uint32_t alloclen; int ret; mode |= S_IFDIR; @@ -457,8 +486,8 @@ static int jffs2_mkdir (struct inode *di * Just the node will do for now, though */ namelen = dentry->d_name.len; - ret = jffs2_reserve_space(c, sizeof(*ri), &phys_ofs, &alloclen, ALLOC_NORMAL, - JFFS2_SUMMARY_INODE_SIZE); + ret = jffs2_reserve_space(c, sizeof(*ri), &alloclen, ALLOC_NORMAL, + JFFS2_SUMMARY_INODE_SIZE); if (ret) { jffs2_free_raw_inode(ri); @@ -483,7 +512,7 @@ static int jffs2_mkdir (struct inode *di ri->data_crc = cpu_to_je32(0); ri->node_crc = cpu_to_je32(crc32(0, ri, sizeof(*ri)-8)); - fn = jffs2_write_dnode(c, f, ri, NULL, 0, phys_ofs, ALLOC_NORMAL); + fn = jffs2_write_dnode(c, f, ri, NULL, 0, ALLOC_NORMAL); jffs2_free_raw_inode(ri); @@ -501,8 +530,20 @@ static int jffs2_mkdir (struct inode *di up(&f->sem); jffs2_complete_reservation(c); - ret = jffs2_reserve_space(c, sizeof(*rd)+namelen, &phys_ofs, &alloclen, - ALLOC_NORMAL, JFFS2_SUMMARY_DIRENT_SIZE(namelen)); + + ret = jffs2_init_security(inode, dir_i); + if (ret) { + jffs2_clear_inode(inode); + return ret; + } + ret = jffs2_init_acl(inode, dir_i); + if (ret) { + jffs2_clear_inode(inode); + return ret; + } + + ret = jffs2_reserve_space(c, sizeof(*rd)+namelen, &alloclen, + ALLOC_NORMAL, JFFS2_SUMMARY_DIRENT_SIZE(namelen)); if (ret) { /* Eep. */ jffs2_clear_inode(inode); @@ -534,7 +575,7 @@ static int jffs2_mkdir (struct inode *di rd->node_crc = cpu_to_je32(crc32(0, rd, sizeof(*rd)-8)); rd->name_crc = cpu_to_je32(crc32(0, dentry->d_name.name, namelen)); - fd = jffs2_write_dirent(c, dir_f, rd, dentry->d_name.name, namelen, phys_ofs, ALLOC_NORMAL); + fd = jffs2_write_dirent(c, dir_f, rd, dentry->d_name.name, namelen, ALLOC_NORMAL); if (IS_ERR(fd)) { /* dirent failed to write. Delete the inode normally @@ -588,12 +629,12 @@ static int jffs2_mknod (struct inode *di struct jffs2_full_dnode *fn; struct jffs2_full_dirent *fd; int namelen; - jint16_t dev; + union jffs2_device_node dev; int devlen = 0; - uint32_t alloclen, phys_ofs; + uint32_t alloclen; int ret; - if (!old_valid_dev(rdev)) + if (!new_valid_dev(rdev)) return -EINVAL; ri = jffs2_alloc_raw_inode(); @@ -602,17 +643,15 @@ static int jffs2_mknod (struct inode *di c = JFFS2_SB_INFO(dir_i->i_sb); - if (S_ISBLK(mode) || S_ISCHR(mode)) { - dev = cpu_to_je16(old_encode_dev(rdev)); - devlen = sizeof(dev); - } + if (S_ISBLK(mode) || S_ISCHR(mode)) + devlen = jffs2_encode_dev(&dev, rdev); /* Try to reserve enough space for both node and dirent. * Just the node will do for now, though */ namelen = dentry->d_name.len; - ret = jffs2_reserve_space(c, sizeof(*ri) + devlen, &phys_ofs, &alloclen, - ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE); + ret = jffs2_reserve_space(c, sizeof(*ri) + devlen, &alloclen, + ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE); if (ret) { jffs2_free_raw_inode(ri); @@ -639,7 +678,7 @@ static int jffs2_mknod (struct inode *di ri->data_crc = cpu_to_je32(crc32(0, &dev, devlen)); ri->node_crc = cpu_to_je32(crc32(0, ri, sizeof(*ri)-8)); - fn = jffs2_write_dnode(c, f, ri, (char *)&dev, devlen, phys_ofs, ALLOC_NORMAL); + fn = jffs2_write_dnode(c, f, ri, (char *)&dev, devlen, ALLOC_NORMAL); jffs2_free_raw_inode(ri); @@ -657,8 +696,20 @@ static int jffs2_mknod (struct inode *di up(&f->sem); jffs2_complete_reservation(c); - ret = jffs2_reserve_space(c, sizeof(*rd)+namelen, &phys_ofs, &alloclen, - ALLOC_NORMAL, JFFS2_SUMMARY_DIRENT_SIZE(namelen)); + + ret = jffs2_init_security(inode, dir_i); + if (ret) { + jffs2_clear_inode(inode); + return ret; + } + ret = jffs2_init_acl(inode, dir_i); + if (ret) { + jffs2_clear_inode(inode); + return ret; + } + + ret = jffs2_reserve_space(c, sizeof(*rd)+namelen, &alloclen, + ALLOC_NORMAL, JFFS2_SUMMARY_DIRENT_SIZE(namelen)); if (ret) { /* Eep. */ jffs2_clear_inode(inode); @@ -693,7 +744,7 @@ static int jffs2_mknod (struct inode *di rd->node_crc = cpu_to_je32(crc32(0, rd, sizeof(*rd)-8)); rd->name_crc = cpu_to_je32(crc32(0, dentry->d_name.name, namelen)); - fd = jffs2_write_dirent(c, dir_f, rd, dentry->d_name.name, namelen, phys_ofs, ALLOC_NORMAL); + fd = jffs2_write_dirent(c, dir_f, rd, dentry->d_name.name, namelen, ALLOC_NORMAL); if (IS_ERR(fd)) { /* dirent failed to write. Delete the inode normally diff -puN fs/jffs2/erase.c~git-mtd fs/jffs2/erase.c --- devel/fs/jffs2/erase.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs2/erase.c 2006-05-29 15:02:34.000000000 -0700 @@ -30,7 +30,6 @@ static void jffs2_erase_callback(struct #endif static void jffs2_erase_failed(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb, uint32_t bad_offset); static void jffs2_erase_succeeded(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb); -static void jffs2_free_all_node_refs(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb); static void jffs2_mark_erased_block(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb); static void jffs2_erase_block(struct jffs2_sb_info *c, @@ -136,7 +135,7 @@ void jffs2_erase_pending_blocks(struct j c->used_size -= jeb->used_size; c->dirty_size -= jeb->dirty_size; jeb->wasted_size = jeb->used_size = jeb->dirty_size = jeb->free_size = 0; - jffs2_free_all_node_refs(c, jeb); + jffs2_free_jeb_node_refs(c, jeb); list_add(&jeb->list, &c->erasing_list); spin_unlock(&c->erase_completion_lock); @@ -231,6 +230,7 @@ static inline void jffs2_remove_node_ref at the end of the linked list. Stash it and continue from the beginning of the list */ ic = (struct jffs2_inode_cache *)(*prev); + BUG_ON(ic->class != RAWNODE_CLASS_INODE_CACHE); prev = &ic->nodes; continue; } @@ -283,22 +283,27 @@ static inline void jffs2_remove_node_ref jffs2_del_ino_cache(c, ic); } -static void jffs2_free_all_node_refs(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb) +void jffs2_free_jeb_node_refs(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb) { - struct jffs2_raw_node_ref *ref; + struct jffs2_raw_node_ref *block, *ref; D1(printk(KERN_DEBUG "Freeing all node refs for eraseblock offset 0x%08x\n", jeb->offset)); - while(jeb->first_node) { - ref = jeb->first_node; - jeb->first_node = ref->next_phys; - /* Remove from the inode-list */ - if (ref->next_in_ino) + block = ref = jeb->first_node; + + while (ref) { + if (ref->flash_offset == REF_LINK_NODE) { + ref = ref->next_in_ino; + jffs2_free_refblock(block); + block = ref; + continue; + } + if (ref->flash_offset != REF_EMPTY_NODE && ref->next_in_ino) jffs2_remove_node_refs_from_ino_list(c, ref, jeb); /* else it was a non-inode node or already removed, so don't bother */ - jffs2_free_raw_node_ref(ref); + ref++; } - jeb->last_node = NULL; + jeb->first_node = jeb->last_node = NULL; } static int jffs2_block_check_erase(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb, uint32_t *bad_offset) @@ -351,7 +356,6 @@ fail: static void jffs2_mark_erased_block(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb) { - struct jffs2_raw_node_ref *marker_ref = NULL; size_t retlen; int ret; uint32_t bad_offset; @@ -373,12 +377,8 @@ static void jffs2_mark_erased_block(stru goto filebad; } - jeb->first_node = jeb->last_node = NULL; + /* Everything else got zeroed before the erase */ jeb->free_size = c->sector_size; - jeb->used_size = 0; - jeb->dirty_size = 0; - jeb->wasted_size = 0; - } else { struct kvec vecs[1]; @@ -388,11 +388,7 @@ static void jffs2_mark_erased_block(stru .totlen = cpu_to_je32(c->cleanmarker_size) }; - marker_ref = jffs2_alloc_raw_node_ref(); - if (!marker_ref) { - printk(KERN_WARNING "Failed to allocate raw node ref for clean marker. Refiling\n"); - goto refile; - } + jffs2_prealloc_raw_node_refs(c, jeb, 1); marker.hdr_crc = cpu_to_je32(crc32(0, &marker, sizeof(struct jffs2_unknown_node)-4)); @@ -408,21 +404,13 @@ static void jffs2_mark_erased_block(stru printk(KERN_WARNING "Short write to newly-erased block at 0x%08x: Wanted %zd, got %zd\n", jeb->offset, sizeof(marker), retlen); - jffs2_free_raw_node_ref(marker_ref); goto filebad; } - marker_ref->next_in_ino = NULL; - marker_ref->next_phys = NULL; - marker_ref->flash_offset = jeb->offset | REF_NORMAL; - marker_ref->__totlen = c->cleanmarker_size; - - jeb->first_node = jeb->last_node = marker_ref; - - jeb->free_size = c->sector_size - c->cleanmarker_size; - jeb->used_size = c->cleanmarker_size; - jeb->dirty_size = 0; - jeb->wasted_size = 0; + /* Everything else got zeroed before the erase */ + jeb->free_size = c->sector_size; + /* FIXME Special case for cleanmarker in empty block */ + jffs2_link_node_ref(c, jeb, jeb->offset | REF_NORMAL, c->cleanmarker_size, NULL); } spin_lock(&c->erase_completion_lock); diff -puN fs/jffs2/file.c~git-mtd fs/jffs2/file.c --- devel/fs/jffs2/file.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs2/file.c 2006-05-29 15:02:34.000000000 -0700 @@ -54,7 +54,12 @@ const struct file_operations jffs2_file_ struct inode_operations jffs2_file_inode_operations = { - .setattr = jffs2_setattr + .permission = jffs2_permission, + .setattr = jffs2_setattr, + .setxattr = jffs2_setxattr, + .getxattr = jffs2_getxattr, + .listxattr = jffs2_listxattr, + .removexattr = jffs2_removexattr }; struct address_space_operations jffs2_file_address_operations = @@ -129,13 +134,13 @@ static int jffs2_prepare_write (struct f struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb); struct jffs2_raw_inode ri; struct jffs2_full_dnode *fn; - uint32_t phys_ofs, alloc_len; + uint32_t alloc_len; D1(printk(KERN_DEBUG "Writing new hole frag 0x%x-0x%x between current EOF and new page\n", (unsigned int)inode->i_size, pageofs)); - ret = jffs2_reserve_space(c, sizeof(ri), &phys_ofs, &alloc_len, - ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE); + ret = jffs2_reserve_space(c, sizeof(ri), &alloc_len, + ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE); if (ret) return ret; @@ -161,7 +166,7 @@ static int jffs2_prepare_write (struct f ri.node_crc = cpu_to_je32(crc32(0, &ri, sizeof(ri)-8)); ri.data_crc = cpu_to_je32(0); - fn = jffs2_write_dnode(c, f, &ri, NULL, 0, phys_ofs, ALLOC_NORMAL); + fn = jffs2_write_dnode(c, f, &ri, NULL, 0, ALLOC_NORMAL); if (IS_ERR(fn)) { ret = PTR_ERR(fn); @@ -215,12 +220,20 @@ static int jffs2_commit_write (struct fi D1(printk(KERN_DEBUG "jffs2_commit_write(): ino #%lu, page at 0x%lx, range %d-%d, flags %lx\n", inode->i_ino, pg->index << PAGE_CACHE_SHIFT, start, end, pg->flags)); - if (!start && end == PAGE_CACHE_SIZE) { - /* We need to avoid deadlock with page_cache_read() in - jffs2_garbage_collect_pass(). So we have to mark the - page up to date, to prevent page_cache_read() from - trying to re-lock it. */ - SetPageUptodate(pg); + if (end == PAGE_CACHE_SIZE) { + if (!start) { + /* We need to avoid deadlock with page_cache_read() in + jffs2_garbage_collect_pass(). So we have to mark the + page up to date, to prevent page_cache_read() from + trying to re-lock it. */ + SetPageUptodate(pg); + } else { + /* When writing out the end of a page, write out the + _whole_ page. This helps to reduce the number of + nodes in files which have many short writes, like + syslog files. */ + start = aligned_start = 0; + } } ri = jffs2_alloc_raw_inode(); diff -puN fs/jffs2/fs.c~git-mtd fs/jffs2/fs.c --- devel/fs/jffs2/fs.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs2/fs.c 2006-05-29 15:02:34.000000000 -0700 @@ -33,11 +33,11 @@ static int jffs2_do_setattr (struct inod struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode); struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb); struct jffs2_raw_inode *ri; - unsigned short dev; + union jffs2_device_node dev; unsigned char *mdata = NULL; int mdatalen = 0; unsigned int ivalid; - uint32_t phys_ofs, alloclen; + uint32_t alloclen; int ret; D1(printk(KERN_DEBUG "jffs2_setattr(): ino #%lu\n", inode->i_ino)); ret = inode_change_ok(inode, iattr); @@ -51,20 +51,24 @@ static int jffs2_do_setattr (struct inod it out again with the appropriate data attached */ if (S_ISBLK(inode->i_mode) || S_ISCHR(inode->i_mode)) { /* For these, we don't actually need to read the old node */ - dev = old_encode_dev(inode->i_rdev); + mdatalen = jffs2_encode_dev(&dev, inode->i_rdev); mdata = (char *)&dev; - mdatalen = sizeof(dev); D1(printk(KERN_DEBUG "jffs2_setattr(): Writing %d bytes of kdev_t\n", mdatalen)); } else if (S_ISLNK(inode->i_mode)) { + down(&f->sem); mdatalen = f->metadata->size; mdata = kmalloc(f->metadata->size, GFP_USER); - if (!mdata) + if (!mdata) { + up(&f->sem); return -ENOMEM; + } ret = jffs2_read_dnode(c, f, f->metadata, mdata, 0, mdatalen); if (ret) { + up(&f->sem); kfree(mdata); return ret; } + up(&f->sem); D1(printk(KERN_DEBUG "jffs2_setattr(): Writing %d bytes of symlink target\n", mdatalen)); } @@ -75,8 +79,8 @@ static int jffs2_do_setattr (struct inod return -ENOMEM; } - ret = jffs2_reserve_space(c, sizeof(*ri) + mdatalen, &phys_ofs, &alloclen, - ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE); + ret = jffs2_reserve_space(c, sizeof(*ri) + mdatalen, &alloclen, + ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE); if (ret) { jffs2_free_raw_inode(ri); if (S_ISLNK(inode->i_mode & S_IFMT)) @@ -127,7 +131,7 @@ static int jffs2_do_setattr (struct inod else ri->data_crc = cpu_to_je32(0); - new_metadata = jffs2_write_dnode(c, f, ri, mdata, mdatalen, phys_ofs, ALLOC_NORMAL); + new_metadata = jffs2_write_dnode(c, f, ri, mdata, mdatalen, ALLOC_NORMAL); if (S_ISLNK(inode->i_mode)) kfree(mdata); @@ -180,7 +184,12 @@ static int jffs2_do_setattr (struct inod int jffs2_setattr(struct dentry *dentry, struct iattr *iattr) { - return jffs2_do_setattr(dentry->d_inode, iattr); + int rc; + + rc = jffs2_do_setattr(dentry->d_inode, iattr); + if (!rc && (iattr->ia_valid & ATTR_MODE)) + rc = jffs2_acl_chmod(dentry->d_inode); + return rc; } int jffs2_statfs(struct super_block *sb, struct kstatfs *buf) @@ -219,6 +228,7 @@ void jffs2_clear_inode (struct inode *in D1(printk(KERN_DEBUG "jffs2_clear_inode(): ino #%lu mode %o\n", inode->i_ino, inode->i_mode)); + jffs2_xattr_delete_inode(c, f->inocache); jffs2_do_clear_inode(c, f); } @@ -227,6 +237,8 @@ void jffs2_read_inode (struct inode *ino struct jffs2_inode_info *f; struct jffs2_sb_info *c; struct jffs2_raw_inode latest_node; + union jffs2_device_node jdev; + dev_t rdev = 0; int ret; D1(printk(KERN_DEBUG "jffs2_read_inode(): inode->i_ino == %lu\n", inode->i_ino)); @@ -258,7 +270,6 @@ void jffs2_read_inode (struct inode *ino inode->i_blocks = (inode->i_size + 511) >> 9; switch (inode->i_mode & S_IFMT) { - jint16_t rdev; case S_IFLNK: inode->i_op = &jffs2_symlink_inode_operations; @@ -292,8 +303,16 @@ void jffs2_read_inode (struct inode *ino case S_IFBLK: case S_IFCHR: /* Read the device numbers from the media */ + if (f->metadata->size != sizeof(jdev.old) && + f->metadata->size != sizeof(jdev.new)) { + printk(KERN_NOTICE "Device node has strange size %d\n", f->metadata->size); + up(&f->sem); + jffs2_do_clear_inode(c, f); + make_bad_inode(inode); + return; + } D1(printk(KERN_DEBUG "Reading device numbers from flash\n")); - if (jffs2_read_dnode(c, f, f->metadata, (char *)&rdev, 0, sizeof(rdev)) < 0) { + if (jffs2_read_dnode(c, f, f->metadata, (char *)&jdev, 0, f->metadata->size) < 0) { /* Eep */ printk(KERN_NOTICE "Read device numbers for inode %lu failed\n", (unsigned long)inode->i_ino); up(&f->sem); @@ -301,12 +320,15 @@ void jffs2_read_inode (struct inode *ino make_bad_inode(inode); return; } + if (f->metadata->size == sizeof(jdev.old)) + rdev = old_decode_dev(je16_to_cpu(jdev.old)); + else + rdev = new_decode_dev(je32_to_cpu(jdev.new)); case S_IFSOCK: case S_IFIFO: inode->i_op = &jffs2_file_inode_operations; - init_special_inode(inode, inode->i_mode, - old_decode_dev((je16_to_cpu(rdev)))); + init_special_inode(inode, inode->i_mode, rdev); break; default: @@ -492,6 +514,8 @@ int jffs2_do_fill_super(struct super_blo } memset(c->inocache_list, 0, INOCACHE_HASHSIZE * sizeof(struct jffs2_inode_cache *)); + jffs2_init_xattr_subsystem(c); + if ((ret = jffs2_do_mount_fs(c))) goto out_inohash; @@ -526,6 +550,7 @@ int jffs2_do_fill_super(struct super_blo else kfree(c->blocks); out_inohash: + jffs2_clear_xattr_subsystem(c); kfree(c->inocache_list); out_wbuf: jffs2_flash_cleanup(c); @@ -639,13 +664,6 @@ static int jffs2_flash_setup(struct jffs return ret; } - /* add setups for other bizarre flashes here... */ - if (jffs2_nor_ecc(c)) { - ret = jffs2_nor_ecc_flash_setup(c); - if (ret) - return ret; - } - /* and Dataflash */ if (jffs2_dataflash(c)) { ret = jffs2_dataflash_setup(c); @@ -669,11 +687,6 @@ void jffs2_flash_cleanup(struct jffs2_sb jffs2_nand_flash_cleanup(c); } - /* add cleanups for other bizarre flashes here... */ - if (jffs2_nor_ecc(c)) { - jffs2_nor_ecc_flash_cleanup(c); - } - /* and DataFlash */ if (jffs2_dataflash(c)) { jffs2_dataflash_cleanup(c); diff -puN fs/jffs2/gc.c~git-mtd fs/jffs2/gc.c --- devel/fs/jffs2/gc.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs2/gc.c 2006-05-29 15:02:34.000000000 -0700 @@ -125,6 +125,7 @@ int jffs2_garbage_collect_pass(struct jf struct jffs2_eraseblock *jeb; struct jffs2_raw_node_ref *raw; int ret = 0, inum, nlink; + int xattr = 0; if (down_interruptible(&c->alloc_sem)) return -EINTR; @@ -138,7 +139,7 @@ int jffs2_garbage_collect_pass(struct jf the node CRCs etc. Do it now. */ /* checked_ino is protected by the alloc_sem */ - if (c->checked_ino > c->highest_ino) { + if (c->checked_ino > c->highest_ino && xattr) { printk(KERN_CRIT "Checked all inodes but still 0x%x bytes of unchecked space?\n", c->unchecked_size); jffs2_dbg_dump_block_lists_nolock(c); @@ -148,6 +149,9 @@ int jffs2_garbage_collect_pass(struct jf spin_unlock(&c->erase_completion_lock); + if (!xattr) + xattr = jffs2_verify_xattr(c); + spin_lock(&c->inocache_lock); ic = jffs2_get_ino_cache(c, c->checked_ino++); @@ -181,6 +185,10 @@ int jffs2_garbage_collect_pass(struct jf and trigger the BUG() above while we haven't yet finished checking all its nodes */ D1(printk(KERN_DEBUG "Waiting for ino #%u to finish reading\n", ic->ino)); + /* We need to come back again for the _same_ inode. We've + made no progress in this case, but that should be OK */ + c->checked_ino--; + up(&c->alloc_sem); sleep_on_spinunlock(&c->inocache_wq, &c->inocache_lock); return 0; @@ -231,7 +239,7 @@ int jffs2_garbage_collect_pass(struct jf while(ref_obsolete(raw)) { D1(printk(KERN_DEBUG "Node at 0x%08x is obsolete... skipping\n", ref_offset(raw))); - raw = raw->next_phys; + raw = ref_next(raw); if (unlikely(!raw)) { printk(KERN_WARNING "eep. End of raw list while still supposedly nodes to GC\n"); printk(KERN_WARNING "erase block at 0x%08x. free_size 0x%08x, dirty_size 0x%08x, used_size 0x%08x\n", @@ -248,16 +256,37 @@ int jffs2_garbage_collect_pass(struct jf if (!raw->next_in_ino) { /* Inode-less node. Clean marker, snapshot or something like that */ - /* FIXME: If it's something that needs to be copied, including something - we don't grok that has JFFS2_NODETYPE_RWCOMPAT_COPY, we should do so */ spin_unlock(&c->erase_completion_lock); - jffs2_mark_node_obsolete(c, raw); + if (ref_flags(raw) == REF_PRISTINE) { + /* It's an unknown node with JFFS2_FEATURE_RWCOMPAT_COPY */ + jffs2_garbage_collect_pristine(c, NULL, raw); + } else { + /* Just mark it obsolete */ + jffs2_mark_node_obsolete(c, raw); + } up(&c->alloc_sem); goto eraseit_lock; } ic = jffs2_raw_ref_to_ic(raw); +#ifdef CONFIG_JFFS2_FS_XATTR + /* When 'ic' refers xattr_datum/xattr_ref, this node is GCed as xattr. + * We can decide whether this node is inode or xattr by ic->class. */ + if (ic->class == RAWNODE_CLASS_XATTR_DATUM + || ic->class == RAWNODE_CLASS_XATTR_REF) { + BUG_ON(raw->next_in_ino != (void *)ic); + spin_unlock(&c->erase_completion_lock); + + if (ic->class == RAWNODE_CLASS_XATTR_DATUM) { + ret = jffs2_garbage_collect_xattr_datum(c, (struct jffs2_xattr_datum *)ic); + } else { + ret = jffs2_garbage_collect_xattr_ref(c, (struct jffs2_xattr_ref *)ic); + } + goto release_sem; + } +#endif + /* We need to hold the inocache. Either the erase_completion_lock or the inocache_lock are sufficient; we trade down since the inocache_lock causes less contention. */ @@ -499,7 +528,6 @@ static int jffs2_garbage_collect_pristin struct jffs2_raw_node_ref *raw) { union jffs2_node_union *node; - struct jffs2_raw_node_ref *nraw; size_t retlen; int ret; uint32_t phys_ofs, alloclen; @@ -508,15 +536,16 @@ static int jffs2_garbage_collect_pristin D1(printk(KERN_DEBUG "Going to GC REF_PRISTINE node at 0x%08x\n", ref_offset(raw))); - rawlen = ref_totlen(c, c->gcblock, raw); + alloclen = rawlen = ref_totlen(c, c->gcblock, raw); /* Ask for a small amount of space (or the totlen if smaller) because we don't want to force wastage of the end of a block if splitting would work. */ - ret = jffs2_reserve_space_gc(c, min_t(uint32_t, sizeof(struct jffs2_raw_inode) + - JFFS2_MIN_DATA_LEN, rawlen), &phys_ofs, &alloclen, rawlen); - /* this is not the exact summary size of it, - it is only an upper estimation */ + if (ic && alloclen > sizeof(struct jffs2_raw_inode) + JFFS2_MIN_DATA_LEN) + alloclen = sizeof(struct jffs2_raw_inode) + JFFS2_MIN_DATA_LEN; + + ret = jffs2_reserve_space_gc(c, alloclen, &alloclen, rawlen); + /* 'rawlen' is not the exact summary size; it is only an upper estimation */ if (ret) return ret; @@ -580,22 +609,17 @@ static int jffs2_garbage_collect_pristin } break; default: - printk(KERN_WARNING "Unknown node type for REF_PRISTINE node at 0x%08x: 0x%04x\n", - ref_offset(raw), je16_to_cpu(node->u.nodetype)); - goto bail; - } - - nraw = jffs2_alloc_raw_node_ref(); - if (!nraw) { - ret = -ENOMEM; - goto out_node; + /* If it's inode-less, we don't _know_ what it is. Just copy it intact */ + if (ic) { + printk(KERN_WARNING "Unknown node type for REF_PRISTINE node at 0x%08x: 0x%04x\n", + ref_offset(raw), je16_to_cpu(node->u.nodetype)); + goto bail; + } } /* OK, all the CRCs are good; this node can just be copied as-is. */ retry: - nraw->flash_offset = phys_ofs; - nraw->__totlen = rawlen; - nraw->next_phys = NULL; + phys_ofs = write_ofs(c); ret = jffs2_flash_write(c, phys_ofs, rawlen, &retlen, (char *)node); @@ -603,17 +627,11 @@ static int jffs2_garbage_collect_pristin printk(KERN_NOTICE "Write of %d bytes at 0x%08x failed. returned %d, retlen %zd\n", rawlen, phys_ofs, ret, retlen); if (retlen) { - /* Doesn't belong to any inode */ - nraw->next_in_ino = NULL; - - nraw->flash_offset |= REF_OBSOLETE; - jffs2_add_physical_node_ref(c, nraw); - jffs2_mark_node_obsolete(c, nraw); + jffs2_add_physical_node_ref(c, phys_ofs | REF_OBSOLETE, rawlen, NULL); } else { - printk(KERN_NOTICE "Not marking the space at 0x%08x as dirty because the flash driver returned retlen zero\n", nraw->flash_offset); - jffs2_free_raw_node_ref(nraw); + printk(KERN_NOTICE "Not marking the space at 0x%08x as dirty because the flash driver returned retlen zero\n", phys_ofs); } - if (!retried && (nraw = jffs2_alloc_raw_node_ref())) { + if (!retried) { /* Try to reallocate space and retry */ uint32_t dummy; struct jffs2_eraseblock *jeb = &c->blocks[phys_ofs / c->sector_size]; @@ -625,7 +643,7 @@ static int jffs2_garbage_collect_pristin jffs2_dbg_acct_sanity_check(c,jeb); jffs2_dbg_acct_paranoia_check(c, jeb); - ret = jffs2_reserve_space_gc(c, rawlen, &phys_ofs, &dummy, rawlen); + ret = jffs2_reserve_space_gc(c, rawlen, &dummy, rawlen); /* this is not the exact summary size of it, it is only an upper estimation */ @@ -638,25 +656,13 @@ static int jffs2_garbage_collect_pristin goto retry; } D1(printk(KERN_DEBUG "Failed to allocate space to retry failed write: %d!\n", ret)); - jffs2_free_raw_node_ref(nraw); } - jffs2_free_raw_node_ref(nraw); if (!ret) ret = -EIO; goto out_node; } - nraw->flash_offset |= REF_PRISTINE; - jffs2_add_physical_node_ref(c, nraw); - - /* Link into per-inode list. This is safe because of the ic - state being INO_STATE_GC. Note that if we're doing this - for an inode which is in-core, the 'nraw' pointer is then - going to be fetched from ic->nodes by our caller. */ - spin_lock(&c->erase_completion_lock); - nraw->next_in_ino = ic->nodes; - ic->nodes = nraw; - spin_unlock(&c->erase_completion_lock); + jffs2_add_physical_node_ref(c, phys_ofs | REF_PRISTINE, rawlen, ic); jffs2_mark_node_obsolete(c, raw); D1(printk(KERN_DEBUG "WHEEE! GC REF_PRISTINE node at 0x%08x succeeded\n", ref_offset(raw))); @@ -675,19 +681,16 @@ static int jffs2_garbage_collect_metadat struct jffs2_full_dnode *new_fn; struct jffs2_raw_inode ri; struct jffs2_node_frag *last_frag; - jint16_t dev; + union jffs2_device_node dev; char *mdata = NULL, mdatalen = 0; - uint32_t alloclen, phys_ofs, ilen; + uint32_t alloclen, ilen; int ret; if (S_ISBLK(JFFS2_F_I_MODE(f)) || S_ISCHR(JFFS2_F_I_MODE(f)) ) { /* For these, we don't actually need to read the old node */ - /* FIXME: for minor or major > 255. */ - dev = cpu_to_je16(((JFFS2_F_I_RDEV_MAJ(f) << 8) | - JFFS2_F_I_RDEV_MIN(f))); + mdatalen = jffs2_encode_dev(&dev, JFFS2_F_I_RDEV(f)); mdata = (char *)&dev; - mdatalen = sizeof(dev); D1(printk(KERN_DEBUG "jffs2_garbage_collect_metadata(): Writing %d bytes of kdev_t\n", mdatalen)); } else if (S_ISLNK(JFFS2_F_I_MODE(f))) { mdatalen = fn->size; @@ -706,7 +709,7 @@ static int jffs2_garbage_collect_metadat } - ret = jffs2_reserve_space_gc(c, sizeof(ri) + mdatalen, &phys_ofs, &alloclen, + ret = jffs2_reserve_space_gc(c, sizeof(ri) + mdatalen, &alloclen, JFFS2_SUMMARY_INODE_SIZE); if (ret) { printk(KERN_WARNING "jffs2_reserve_space_gc of %zd bytes for garbage_collect_metadata failed: %d\n", @@ -744,7 +747,7 @@ static int jffs2_garbage_collect_metadat ri.node_crc = cpu_to_je32(crc32(0, &ri, sizeof(ri)-8)); ri.data_crc = cpu_to_je32(crc32(0, mdata, mdatalen)); - new_fn = jffs2_write_dnode(c, f, &ri, mdata, mdatalen, phys_ofs, ALLOC_GC); + new_fn = jffs2_write_dnode(c, f, &ri, mdata, mdatalen, ALLOC_GC); if (IS_ERR(new_fn)) { printk(KERN_WARNING "Error writing new dnode: %ld\n", PTR_ERR(new_fn)); @@ -765,7 +768,7 @@ static int jffs2_garbage_collect_dirent( { struct jffs2_full_dirent *new_fd; struct jffs2_raw_dirent rd; - uint32_t alloclen, phys_ofs; + uint32_t alloclen; int ret; rd.magic = cpu_to_je16(JFFS2_MAGIC_BITMASK); @@ -787,14 +790,14 @@ static int jffs2_garbage_collect_dirent( rd.node_crc = cpu_to_je32(crc32(0, &rd, sizeof(rd)-8)); rd.name_crc = cpu_to_je32(crc32(0, fd->name, rd.nsize)); - ret = jffs2_reserve_space_gc(c, sizeof(rd)+rd.nsize, &phys_ofs, &alloclen, + ret = jffs2_reserve_space_gc(c, sizeof(rd)+rd.nsize, &alloclen, JFFS2_SUMMARY_DIRENT_SIZE(rd.nsize)); if (ret) { printk(KERN_WARNING "jffs2_reserve_space_gc of %zd bytes for garbage_collect_dirent failed: %d\n", sizeof(rd)+rd.nsize, ret); return ret; } - new_fd = jffs2_write_dirent(c, f, &rd, fd->name, rd.nsize, phys_ofs, ALLOC_GC); + new_fd = jffs2_write_dirent(c, f, &rd, fd->name, rd.nsize, ALLOC_GC); if (IS_ERR(new_fd)) { printk(KERN_WARNING "jffs2_write_dirent in garbage_collect_dirent failed: %ld\n", PTR_ERR(new_fd)); @@ -922,7 +925,7 @@ static int jffs2_garbage_collect_hole(st struct jffs2_raw_inode ri; struct jffs2_node_frag *frag; struct jffs2_full_dnode *new_fn; - uint32_t alloclen, phys_ofs, ilen; + uint32_t alloclen, ilen; int ret; D1(printk(KERN_DEBUG "Writing replacement hole node for ino #%u from offset 0x%x to 0x%x\n", @@ -1001,14 +1004,14 @@ static int jffs2_garbage_collect_hole(st ri.data_crc = cpu_to_je32(0); ri.node_crc = cpu_to_je32(crc32(0, &ri, sizeof(ri)-8)); - ret = jffs2_reserve_space_gc(c, sizeof(ri), &phys_ofs, &alloclen, - JFFS2_SUMMARY_INODE_SIZE); + ret = jffs2_reserve_space_gc(c, sizeof(ri), &alloclen, + JFFS2_SUMMARY_INODE_SIZE); if (ret) { printk(KERN_WARNING "jffs2_reserve_space_gc of %zd bytes for garbage_collect_hole failed: %d\n", sizeof(ri), ret); return ret; } - new_fn = jffs2_write_dnode(c, f, &ri, NULL, 0, phys_ofs, ALLOC_GC); + new_fn = jffs2_write_dnode(c, f, &ri, NULL, 0, ALLOC_GC); if (IS_ERR(new_fn)) { printk(KERN_WARNING "Error writing new hole node: %ld\n", PTR_ERR(new_fn)); @@ -1070,7 +1073,7 @@ static int jffs2_garbage_collect_dnode(s { struct jffs2_full_dnode *new_fn; struct jffs2_raw_inode ri; - uint32_t alloclen, phys_ofs, offset, orig_end, orig_start; + uint32_t alloclen, offset, orig_end, orig_start; int ret = 0; unsigned char *comprbuf = NULL, *writebuf; unsigned long pg; @@ -1227,7 +1230,7 @@ static int jffs2_garbage_collect_dnode(s uint32_t cdatalen; uint16_t comprtype = JFFS2_COMPR_NONE; - ret = jffs2_reserve_space_gc(c, sizeof(ri) + JFFS2_MIN_DATA_LEN, &phys_ofs, + ret = jffs2_reserve_space_gc(c, sizeof(ri) + JFFS2_MIN_DATA_LEN, &alloclen, JFFS2_SUMMARY_INODE_SIZE); if (ret) { @@ -1264,7 +1267,7 @@ static int jffs2_garbage_collect_dnode(s ri.node_crc = cpu_to_je32(crc32(0, &ri, sizeof(ri)-8)); ri.data_crc = cpu_to_je32(crc32(0, comprbuf, cdatalen)); - new_fn = jffs2_write_dnode(c, f, &ri, comprbuf, cdatalen, phys_ofs, ALLOC_GC); + new_fn = jffs2_write_dnode(c, f, &ri, comprbuf, cdatalen, ALLOC_GC); jffs2_free_comprbuf(comprbuf, writebuf); diff -L fs/jffs2/histo.h -puN fs/jffs2/histo.h~git-mtd /dev/null --- devel/fs/jffs2/histo.h +++ /dev/null 2006-05-29 10:18:53.280907750 -0700 @@ -1,3 +0,0 @@ -/* This file provides the bit-probabilities for the input file */ -#define BIT_DIVIDER 629 -static int bits[9] = { 179,167,183,165,159,198,178,119,}; /* ia32 .so files */ diff -puN /dev/null fs/jffs2/jffs2_fs_i.h --- /dev/null 2006-05-29 10:18:53.280907750 -0700 +++ devel-akpm/fs/jffs2/jffs2_fs_i.h 2006-05-29 15:02:34.000000000 -0700 @@ -0,0 +1,55 @@ +/* $Id: jffs2_fs_i.h,v 1.19 2005/11/07 11:14:52 gleixner Exp $ */ + +#ifndef _JFFS2_FS_I +#define _JFFS2_FS_I + +#include +#include +#include +#include + +struct jffs2_inode_info { + /* We need an internal mutex similar to inode->i_mutex. + Unfortunately, we can't used the existing one, because + either the GC would deadlock, or we'd have to release it + before letting GC proceed. Or we'd have to put ugliness + into the GC code so it didn't attempt to obtain the i_mutex + for the inode(s) which are already locked */ + struct semaphore sem; + + /* The highest (datanode) version number used for this ino */ + uint32_t highest_version; + + /* List of data fragments which make up the file */ + struct rb_root fragtree; + + /* There may be one datanode which isn't referenced by any of the + above fragments, if it contains a metadata update but no actual + data - or if this is a directory inode */ + /* This also holds the _only_ dnode for symlinks/device nodes, + etc. */ + struct jffs2_full_dnode *metadata; + + /* Directory entries */ + struct jffs2_full_dirent *dents; + + /* The target path if this is the inode of a symlink */ + unsigned char *target; + + /* Some stuff we just have to keep in-core at all times, for each inode. */ + struct jffs2_inode_cache *inocache; + + uint16_t flags; + uint8_t usercompr; +#if !defined (__ECOS) +#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,2) + struct inode vfs_inode; +#endif +#endif +#ifdef CONFIG_JFFS2_FS_POSIX_ACL + struct posix_acl *i_acl_access; + struct posix_acl *i_acl_default; +#endif +}; + +#endif /* _JFFS2_FS_I */ diff -puN /dev/null fs/jffs2/jffs2_fs_sb.h --- /dev/null 2006-05-29 10:18:53.280907750 -0700 +++ devel-akpm/fs/jffs2/jffs2_fs_sb.h 2006-05-29 15:02:34.000000000 -0700 @@ -0,0 +1,133 @@ +/* $Id: jffs2_fs_sb.h,v 1.54 2005/09/21 13:37:34 dedekind Exp $ */ + +#ifndef _JFFS2_FS_SB +#define _JFFS2_FS_SB + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define JFFS2_SB_FLAG_RO 1 +#define JFFS2_SB_FLAG_SCANNING 2 /* Flash scanning is in progress */ +#define JFFS2_SB_FLAG_BUILDING 4 /* File system building is in progress */ + +struct jffs2_inodirty; + +/* A struct for the overall file system control. Pointers to + jffs2_sb_info structs are named `c' in the source code. + Nee jffs_control +*/ +struct jffs2_sb_info { + struct mtd_info *mtd; + + uint32_t highest_ino; + uint32_t checked_ino; + + unsigned int flags; + + struct task_struct *gc_task; /* GC task struct */ + struct completion gc_thread_start; /* GC thread start completion */ + struct completion gc_thread_exit; /* GC thread exit completion port */ + + struct semaphore alloc_sem; /* Used to protect all the following + fields, and also to protect against + out-of-order writing of nodes. And GC. */ + uint32_t cleanmarker_size; /* Size of an _inline_ CLEANMARKER + (i.e. zero for OOB CLEANMARKER */ + + uint32_t flash_size; + uint32_t used_size; + uint32_t dirty_size; + uint32_t wasted_size; + uint32_t free_size; + uint32_t erasing_size; + uint32_t bad_size; + uint32_t sector_size; + uint32_t unchecked_size; + + uint32_t nr_free_blocks; + uint32_t nr_erasing_blocks; + + /* Number of free blocks there must be before we... */ + uint8_t resv_blocks_write; /* ... allow a normal filesystem write */ + uint8_t resv_blocks_deletion; /* ... allow a normal filesystem deletion */ + uint8_t resv_blocks_gctrigger; /* ... wake up the GC thread */ + uint8_t resv_blocks_gcbad; /* ... pick a block from the bad_list to GC */ + uint8_t resv_blocks_gcmerge; /* ... merge pages when garbage collecting */ + + uint32_t nospc_dirty_size; + + uint32_t nr_blocks; + struct jffs2_eraseblock *blocks; /* The whole array of blocks. Used for getting blocks + * from the offset (blocks[ofs / sector_size]) */ + struct jffs2_eraseblock *nextblock; /* The block we're currently filling */ + + struct jffs2_eraseblock *gcblock; /* The block we're currently garbage-collecting */ + + struct list_head clean_list; /* Blocks 100% full of clean data */ + struct list_head very_dirty_list; /* Blocks with lots of dirty space */ + struct list_head dirty_list; /* Blocks with some dirty space */ + struct list_head erasable_list; /* Blocks which are completely dirty, and need erasing */ + struct list_head erasable_pending_wbuf_list; /* Blocks which need erasing but only after the current wbuf is flushed */ + struct list_head erasing_list; /* Blocks which are currently erasing */ + struct list_head erase_pending_list; /* Blocks which need erasing now */ + struct list_head erase_complete_list; /* Blocks which are erased and need the clean marker written to them */ + struct list_head free_list; /* Blocks which are free and ready to be used */ + struct list_head bad_list; /* Bad blocks. */ + struct list_head bad_used_list; /* Bad blocks with valid data in. */ + + spinlock_t erase_completion_lock; /* Protect free_list and erasing_list + against erase completion handler */ + wait_queue_head_t erase_wait; /* For waiting for erases to complete */ + + wait_queue_head_t inocache_wq; + struct jffs2_inode_cache **inocache_list; + spinlock_t inocache_lock; + + /* Sem to allow jffs2_garbage_collect_deletion_dirent to + drop the erase_completion_lock while it's holding a pointer + to an obsoleted node. I don't like this. Alternatives welcomed. */ + struct semaphore erase_free_sem; + + uint32_t wbuf_pagesize; /* 0 for NOR and other flashes with no wbuf */ + +#ifdef CONFIG_JFFS2_FS_WRITEBUFFER + /* Write-behind buffer for NAND flash */ + unsigned char *wbuf; + unsigned char *oobbuf; + uint32_t wbuf_ofs; + uint32_t wbuf_len; + struct jffs2_inodirty *wbuf_inodes; + + struct rw_semaphore wbuf_sem; /* Protects the write buffer */ + + /* Information about out-of-band area usage... */ + struct nand_ecclayout *ecclayout; + uint32_t badblock_pos; + uint32_t fsdata_pos; + uint32_t fsdata_len; +#endif + + struct jffs2_summary *summary; /* Summary information */ + +#ifdef CONFIG_JFFS2_FS_XATTR +#define XATTRINDEX_HASHSIZE (57) + uint32_t highest_xid; + struct list_head xattrindex[XATTRINDEX_HASHSIZE]; + struct list_head xattr_unchecked; + struct jffs2_xattr_ref *xref_temp; + struct rw_semaphore xattr_sem; + uint32_t xdatum_mem_usage; + uint32_t xdatum_mem_threshold; +#endif + /* OS-private pointer for getting back to master superblock info */ + void *os_priv; +}; + +#endif /* _JFFS2_FB_SB */ diff -puN fs/jffs2/Makefile~git-mtd fs/jffs2/Makefile --- devel/fs/jffs2/Makefile~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs2/Makefile 2006-05-29 15:02:34.000000000 -0700 @@ -12,6 +12,9 @@ jffs2-y += symlink.o build.o erase.o bac jffs2-y += super.o debug.o jffs2-$(CONFIG_JFFS2_FS_WRITEBUFFER) += wbuf.o +jffs2-$(CONFIG_JFFS2_FS_XATTR) += xattr.o xattr_trusted.o xattr_user.o +jffs2-$(CONFIG_JFFS2_FS_SECURITY) += security.o +jffs2-$(CONFIG_JFFS2_FS_POSIX_ACL) += acl.o jffs2-$(CONFIG_JFFS2_RUBIN) += compr_rubin.o jffs2-$(CONFIG_JFFS2_RTIME) += compr_rtime.o jffs2-$(CONFIG_JFFS2_ZLIB) += compr_zlib.o diff -puN fs/jffs2/malloc.c~git-mtd fs/jffs2/malloc.c --- devel/fs/jffs2/malloc.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs2/malloc.c 2006-05-29 15:02:34.000000000 -0700 @@ -26,6 +26,10 @@ static kmem_cache_t *tmp_dnode_info_slab static kmem_cache_t *raw_node_ref_slab; static kmem_cache_t *node_frag_slab; static kmem_cache_t *inode_cache_slab; +#ifdef CONFIG_JFFS2_FS_XATTR +static kmem_cache_t *xattr_datum_cache; +static kmem_cache_t *xattr_ref_cache; +#endif int __init jffs2_create_slab_caches(void) { @@ -53,8 +57,8 @@ int __init jffs2_create_slab_caches(void if (!tmp_dnode_info_slab) goto err; - raw_node_ref_slab = kmem_cache_create("jffs2_raw_node_ref", - sizeof(struct jffs2_raw_node_ref), + raw_node_ref_slab = kmem_cache_create("jffs2_refblock", + sizeof(struct jffs2_raw_node_ref) * (REFS_PER_BLOCK + 1), 0, 0, NULL, NULL); if (!raw_node_ref_slab) goto err; @@ -68,8 +72,24 @@ int __init jffs2_create_slab_caches(void inode_cache_slab = kmem_cache_create("jffs2_inode_cache", sizeof(struct jffs2_inode_cache), 0, 0, NULL, NULL); - if (inode_cache_slab) - return 0; + if (!inode_cache_slab) + goto err; + +#ifdef CONFIG_JFFS2_FS_XATTR + xattr_datum_cache = kmem_cache_create("jffs2_xattr_datum", + sizeof(struct jffs2_xattr_datum), + 0, 0, NULL, NULL); + if (!xattr_datum_cache) + goto err; + + xattr_ref_cache = kmem_cache_create("jffs2_xattr_ref", + sizeof(struct jffs2_xattr_ref), + 0, 0, NULL, NULL); + if (!xattr_ref_cache) + goto err; +#endif + + return 0; err: jffs2_destroy_slab_caches(); return -ENOMEM; @@ -91,6 +111,12 @@ void jffs2_destroy_slab_caches(void) kmem_cache_destroy(node_frag_slab); if(inode_cache_slab) kmem_cache_destroy(inode_cache_slab); +#ifdef CONFIG_JFFS2_FS_XATTR + if (xattr_datum_cache) + kmem_cache_destroy(xattr_datum_cache); + if (xattr_ref_cache) + kmem_cache_destroy(xattr_ref_cache); +#endif } struct jffs2_full_dirent *jffs2_alloc_full_dirent(int namesize) @@ -164,15 +190,65 @@ void jffs2_free_tmp_dnode_info(struct jf kmem_cache_free(tmp_dnode_info_slab, x); } -struct jffs2_raw_node_ref *jffs2_alloc_raw_node_ref(void) +struct jffs2_raw_node_ref *jffs2_alloc_refblock(void) { struct jffs2_raw_node_ref *ret; + ret = kmem_cache_alloc(raw_node_ref_slab, GFP_KERNEL); - dbg_memalloc("%p\n", ret); + if (ret) { + int i = 0; + for (i=0; i < REFS_PER_BLOCK; i++) { + ret[i].flash_offset = REF_EMPTY_NODE; + ret[i].next_in_ino = NULL; + } + ret[i].flash_offset = REF_LINK_NODE; + ret[i].next_in_ino = NULL; + } return ret; } -void jffs2_free_raw_node_ref(struct jffs2_raw_node_ref *x) +int jffs2_prealloc_raw_node_refs(struct jffs2_sb_info *c, + struct jffs2_eraseblock *jeb, int nr) +{ + struct jffs2_raw_node_ref **p, *ref; + int i = nr; + + dbg_memalloc("%d\n", nr); + + p = &jeb->last_node; + ref = *p; + + dbg_memalloc("Reserving %d refs for block @0x%08x\n", nr, jeb->offset); + + /* If jeb->last_node is really a valid node then skip over it */ + if (ref && ref->flash_offset != REF_EMPTY_NODE) + ref++; + + while (i) { + if (!ref) { + dbg_memalloc("Allocating new refblock linked from %p\n", p); + ref = *p = jffs2_alloc_refblock(); + if (!ref) + return -ENOMEM; + } + if (ref->flash_offset == REF_LINK_NODE) { + p = &ref->next_in_ino; + ref = *p; + continue; + } + i--; + ref++; + } + jeb->allocated_refs = nr; + + dbg_memalloc("Reserved %d refs for block @0x%08x, last_node is %p (%08x,%p)\n", + nr, jeb->offset, jeb->last_node, jeb->last_node->flash_offset, + jeb->last_node->next_in_ino); + + return 0; +} + +void jffs2_free_refblock(struct jffs2_raw_node_ref *x) { dbg_memalloc("%p\n", x); kmem_cache_free(raw_node_ref_slab, x); @@ -205,3 +281,40 @@ void jffs2_free_inode_cache(struct jffs2 dbg_memalloc("%p\n", x); kmem_cache_free(inode_cache_slab, x); } + +#ifdef CONFIG_JFFS2_FS_XATTR +struct jffs2_xattr_datum *jffs2_alloc_xattr_datum(void) +{ + struct jffs2_xattr_datum *xd; + xd = kmem_cache_alloc(xattr_datum_cache, GFP_KERNEL); + dbg_memalloc("%p\n", xd); + + memset(xd, 0, sizeof(struct jffs2_xattr_datum)); + xd->class = RAWNODE_CLASS_XATTR_DATUM; + INIT_LIST_HEAD(&xd->xindex); + return xd; +} + +void jffs2_free_xattr_datum(struct jffs2_xattr_datum *xd) +{ + dbg_memalloc("%p\n", xd); + kmem_cache_free(xattr_datum_cache, xd); +} + +struct jffs2_xattr_ref *jffs2_alloc_xattr_ref(void) +{ + struct jffs2_xattr_ref *ref; + ref = kmem_cache_alloc(xattr_ref_cache, GFP_KERNEL); + dbg_memalloc("%p\n", ref); + + memset(ref, 0, sizeof(struct jffs2_xattr_ref)); + ref->class = RAWNODE_CLASS_XATTR_REF; + return ref; +} + +void jffs2_free_xattr_ref(struct jffs2_xattr_ref *ref) +{ + dbg_memalloc("%p\n", ref); + kmem_cache_free(xattr_ref_cache, ref); +} +#endif diff -puN fs/jffs2/nodelist.c~git-mtd fs/jffs2/nodelist.c --- devel/fs/jffs2/nodelist.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs2/nodelist.c 2006-05-29 15:02:34.000000000 -0700 @@ -438,8 +438,7 @@ static int check_node_data(struct jffs2_ if (c->mtd->point) { err = c->mtd->point(c->mtd, ofs, len, &retlen, &buffer); if (!err && retlen < tn->csize) { - JFFS2_WARNING("MTD point returned len too short: %zu " - "instead of %u.\n", retlen, tn->csize); + JFFS2_WARNING("MTD point returned len too short: %zu instead of %u.\n", retlen, tn->csize); c->mtd->unpoint(c->mtd, buffer, ofs, len); } else if (err) JFFS2_WARNING("MTD point failed: error code %d.\n", err); @@ -462,8 +461,7 @@ static int check_node_data(struct jffs2_ } if (retlen != len) { - JFFS2_ERROR("short read at %#08x: %zd instead of %d.\n", - ofs, retlen, len); + JFFS2_ERROR("short read at %#08x: %zd instead of %d.\n", ofs, retlen, len); err = -EIO; goto free_out; } @@ -940,6 +938,7 @@ void jffs2_free_ino_caches(struct jffs2_ this = c->inocache_list[i]; while (this) { next = this->next; + jffs2_xattr_free_inode(c, this); jffs2_free_inode_cache(this); this = next; } @@ -954,9 +953,13 @@ void jffs2_free_raw_node_refs(struct jff for (i=0; inr_blocks; i++) { this = c->blocks[i].first_node; - while(this) { - next = this->next_phys; - jffs2_free_raw_node_ref(this); + while (this) { + if (this[REFS_PER_BLOCK].flash_offset == REF_LINK_NODE) + next = this[REFS_PER_BLOCK].next_in_ino; + else + next = NULL; + + jffs2_free_refblock(this); this = next; } c->blocks[i].first_node = c->blocks[i].last_node = NULL; @@ -1047,3 +1050,169 @@ void jffs2_kill_fragtree(struct rb_root cond_resched(); } } + +struct jffs2_raw_node_ref *jffs2_link_node_ref(struct jffs2_sb_info *c, + struct jffs2_eraseblock *jeb, + uint32_t ofs, uint32_t len, + struct jffs2_inode_cache *ic) +{ + struct jffs2_raw_node_ref *ref; + + BUG_ON(!jeb->allocated_refs); + jeb->allocated_refs--; + + ref = jeb->last_node; + + dbg_noderef("Last node at %p is (%08x,%p)\n", ref, ref->flash_offset, + ref->next_in_ino); + + while (ref->flash_offset != REF_EMPTY_NODE) { + if (ref->flash_offset == REF_LINK_NODE) + ref = ref->next_in_ino; + else + ref++; + } + + dbg_noderef("New ref is %p (%08x becomes %08x,%p) len 0x%x\n", ref, + ref->flash_offset, ofs, ref->next_in_ino, len); + + ref->flash_offset = ofs; + + if (!jeb->first_node) { + jeb->first_node = ref; + BUG_ON(ref_offset(ref) != jeb->offset); + } else if (unlikely(ref_offset(ref) != jeb->offset + c->sector_size - jeb->free_size)) { + uint32_t last_len = ref_totlen(c, jeb, jeb->last_node); + + JFFS2_ERROR("Adding new ref %p at (0x%08x-0x%08x) not immediately after previous (0x%08x-0x%08x)\n", + ref, ref_offset(ref), ref_offset(ref)+len, + ref_offset(jeb->last_node), + ref_offset(jeb->last_node)+last_len); + BUG(); + } + jeb->last_node = ref; + + if (ic) { + ref->next_in_ino = ic->nodes; + ic->nodes = ref; + } else { + ref->next_in_ino = NULL; + } + + switch(ref_flags(ref)) { + case REF_UNCHECKED: + c->unchecked_size += len; + jeb->unchecked_size += len; + break; + + case REF_NORMAL: + case REF_PRISTINE: + c->used_size += len; + jeb->used_size += len; + break; + + case REF_OBSOLETE: + c->dirty_size += len; + jeb->dirty_size += len; + break; + } + c->free_size -= len; + jeb->free_size -= len; + +#ifdef TEST_TOTLEN + /* Set (and test) __totlen field... for now */ + ref->__totlen = len; + ref_totlen(c, jeb, ref); +#endif + return ref; +} + +/* No locking, no reservation of 'ref'. Do not use on a live file system */ +int jffs2_scan_dirty_space(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb, + uint32_t size) +{ + if (!size) + return 0; + if (unlikely(size > jeb->free_size)) { + printk(KERN_CRIT "Dirty space 0x%x larger then free_size 0x%x (wasted 0x%x)\n", + size, jeb->free_size, jeb->wasted_size); + BUG(); + } + /* REF_EMPTY_NODE is !obsolete, so that works OK */ + if (jeb->last_node && ref_obsolete(jeb->last_node)) { +#ifdef TEST_TOTLEN + jeb->last_node->__totlen += size; +#endif + c->dirty_size += size; + c->free_size -= size; + jeb->dirty_size += size; + jeb->free_size -= size; + } else { + uint32_t ofs = jeb->offset + c->sector_size - jeb->free_size; + ofs |= REF_OBSOLETE; + + jffs2_link_node_ref(c, jeb, ofs, size, NULL); + } + + return 0; +} + +/* Calculate totlen from surrounding nodes or eraseblock */ +static inline uint32_t __ref_totlen(struct jffs2_sb_info *c, + struct jffs2_eraseblock *jeb, + struct jffs2_raw_node_ref *ref) +{ + uint32_t ref_end; + struct jffs2_raw_node_ref *next_ref = ref_next(ref); + + if (next_ref) + ref_end = ref_offset(next_ref); + else { + if (!jeb) + jeb = &c->blocks[ref->flash_offset / c->sector_size]; + + /* Last node in block. Use free_space */ + if (unlikely(ref != jeb->last_node)) { + printk(KERN_CRIT "ref %p @0x%08x is not jeb->last_node (%p @0x%08x)\n", + ref, ref_offset(ref), jeb->last_node, jeb->last_node?ref_offset(jeb->last_node):0); + BUG(); + } + ref_end = jeb->offset + c->sector_size - jeb->free_size; + } + return ref_end - ref_offset(ref); +} + +uint32_t __jffs2_ref_totlen(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb, + struct jffs2_raw_node_ref *ref) +{ + uint32_t ret; + + ret = __ref_totlen(c, jeb, ref); + +#ifdef TEST_TOTLEN + if (unlikely(ret != ref->__totlen)) { + if (!jeb) + jeb = &c->blocks[ref->flash_offset / c->sector_size]; + + printk(KERN_CRIT "Totlen for ref at %p (0x%08x-0x%08x) miscalculated as 0x%x instead of %x\n", + ref, ref_offset(ref), ref_offset(ref)+ref->__totlen, + ret, ref->__totlen); + if (ref_next(ref)) { + printk(KERN_CRIT "next %p (0x%08x-0x%08x)\n", ref_next(ref), ref_offset(ref_next(ref)), + ref_offset(ref_next(ref))+ref->__totlen); + } else + printk(KERN_CRIT "No next ref. jeb->last_node is %p\n", jeb->last_node); + + printk(KERN_CRIT "jeb->wasted_size %x, dirty_size %x, used_size %x, free_size %x\n", jeb->wasted_size, jeb->dirty_size, jeb->used_size, jeb->free_size); + +#if defined(JFFS2_DBG_DUMPS) || defined(JFFS2_DBG_PARANOIA_CHECKS) + __jffs2_dbg_dump_node_refs_nolock(c, jeb); +#endif + + WARN_ON(1); + + ret = ref->__totlen; + } +#endif /* TEST_TOTLEN */ + return ret; +} diff -puN fs/jffs2/nodelist.h~git-mtd fs/jffs2/nodelist.h --- devel/fs/jffs2/nodelist.h~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs2/nodelist.h 2006-05-29 15:02:34.000000000 -0700 @@ -18,8 +18,10 @@ #include #include #include -#include -#include +#include "jffs2_fs_sb.h" +#include "jffs2_fs_i.h" +#include "xattr.h" +#include "acl.h" #include "summary.h" #ifdef __ECOS @@ -75,14 +77,50 @@ struct jffs2_raw_node_ref { struct jffs2_raw_node_ref *next_in_ino; /* Points to the next raw_node_ref - for this inode. If this is the last, it points to the inode_cache - for this inode instead. The inode_cache will have NULL in the first - word so you know when you've got there :) */ - struct jffs2_raw_node_ref *next_phys; + for this object. If this _is_ the last, it points to the inode_cache, + xattr_ref or xattr_datum instead. The common part of those structures + has NULL in the first word. See jffs2_raw_ref_to_ic() below */ uint32_t flash_offset; +#define TEST_TOTLEN +#ifdef TEST_TOTLEN uint32_t __totlen; /* This may die; use ref_totlen(c, jeb, ) below */ +#endif }; +#define REF_LINK_NODE ((int32_t)-1) +#define REF_EMPTY_NODE ((int32_t)-2) + +/* Use blocks of about 256 bytes */ +#define REFS_PER_BLOCK ((255/sizeof(struct jffs2_raw_node_ref))-1) + +static inline struct jffs2_raw_node_ref *ref_next(struct jffs2_raw_node_ref *ref) +{ + ref++; + + /* Link to another block of refs */ + if (ref->flash_offset == REF_LINK_NODE) { + ref = ref->next_in_ino; + if (!ref) + return ref; + } + + /* End of chain */ + if (ref->flash_offset == REF_EMPTY_NODE) + return NULL; + + return ref; +} + +static inline struct jffs2_inode_cache *jffs2_raw_ref_to_ic(struct jffs2_raw_node_ref *raw) +{ + while(raw->next_in_ino) + raw = raw->next_in_ino; + + /* NB. This can be a jffs2_xattr_datum or jffs2_xattr_ref and + not actually a jffs2_inode_cache. Check ->class */ + return ((struct jffs2_inode_cache *)raw); +} + /* flash_offset & 3 always has to be zero, because nodes are always aligned at 4 bytes. So we have a couple of extra bits to play with, which indicate the node's status; see below: */ @@ -95,6 +133,11 @@ struct jffs2_raw_node_ref #define ref_obsolete(ref) (((ref)->flash_offset & 3) == REF_OBSOLETE) #define mark_ref_normal(ref) do { (ref)->flash_offset = ref_offset(ref) | REF_NORMAL; } while(0) +/* NB: REF_PRISTINE for an inode-less node (ref->next_in_ino == NULL) indicates + it is an unknown node of type JFFS2_NODETYPE_RWCOMPAT_COPY, so it'll get + copied. If you need to do anything different to GC inode-less nodes, then + you need to modify gc.c accordingly. */ + /* For each inode in the filesystem, we need to keep a record of nlink, because it would be a PITA to scan the whole directory tree at read_inode() time to calculate it, and to keep sufficient information @@ -103,15 +146,27 @@ struct jffs2_raw_node_ref a pointer to the first physical node which is part of this inode, too. */ struct jffs2_inode_cache { + /* First part of structure is shared with other objects which + can terminate the raw node refs' next_in_ino list -- which + currently struct jffs2_xattr_datum and struct jffs2_xattr_ref. */ + struct jffs2_full_dirent *scan_dents; /* Used during scan to hold temporary lists of dirents, and later must be set to NULL to mark the end of the raw_node_ref->next_in_ino chain. */ - struct jffs2_inode_cache *next; struct jffs2_raw_node_ref *nodes; + uint8_t class; /* It's used for identification */ + + /* end of shared structure */ + + uint8_t flags; + uint16_t state; uint32_t ino; + struct jffs2_inode_cache *next; +#ifdef CONFIG_JFFS2_FS_XATTR + struct jffs2_xattr_ref *xref; +#endif int nlink; - int state; }; /* Inode states for 'state' above. We need the 'GC' state to prevent @@ -125,8 +180,16 @@ struct jffs2_inode_cache { #define INO_STATE_READING 5 /* In read_inode() */ #define INO_STATE_CLEARING 6 /* In clear_inode() */ +#define INO_FLAGS_XATTR_CHECKED 0x01 /* has no duplicate xattr_ref */ + +#define RAWNODE_CLASS_INODE_CACHE 0 +#define RAWNODE_CLASS_XATTR_DATUM 1 +#define RAWNODE_CLASS_XATTR_REF 2 + #define INOCACHE_HASHSIZE 128 +#define write_ofs(c) ((c)->nextblock->offset + (c)->sector_size - (c)->nextblock->free_size) + /* Larger representation of a raw node, kept in-core only when the struct inode for this particular ino is instantiated. @@ -192,6 +255,7 @@ struct jffs2_eraseblock uint32_t wasted_size; uint32_t free_size; /* Note that sector_size - free_size is the address of the first free space */ + uint32_t allocated_refs; struct jffs2_raw_node_ref *first_node; struct jffs2_raw_node_ref *last_node; @@ -203,57 +267,7 @@ static inline int jffs2_blocks_use_vmall return ((c->flash_size / c->sector_size) * sizeof (struct jffs2_eraseblock)) > (128 * 1024); } -/* Calculate totlen from surrounding nodes or eraseblock */ -static inline uint32_t __ref_totlen(struct jffs2_sb_info *c, - struct jffs2_eraseblock *jeb, - struct jffs2_raw_node_ref *ref) -{ - uint32_t ref_end; - - if (ref->next_phys) - ref_end = ref_offset(ref->next_phys); - else { - if (!jeb) - jeb = &c->blocks[ref->flash_offset / c->sector_size]; - - /* Last node in block. Use free_space */ - BUG_ON(ref != jeb->last_node); - ref_end = jeb->offset + c->sector_size - jeb->free_size; - } - return ref_end - ref_offset(ref); -} - -static inline uint32_t ref_totlen(struct jffs2_sb_info *c, - struct jffs2_eraseblock *jeb, - struct jffs2_raw_node_ref *ref) -{ - uint32_t ret; - -#if CONFIG_JFFS2_FS_DEBUG > 0 - if (jeb && jeb != &c->blocks[ref->flash_offset / c->sector_size]) { - printk(KERN_CRIT "ref_totlen called with wrong block -- at 0x%08x instead of 0x%08x; ref 0x%08x\n", - jeb->offset, c->blocks[ref->flash_offset / c->sector_size].offset, ref_offset(ref)); - BUG(); - } -#endif - -#if 1 - ret = ref->__totlen; -#else - /* This doesn't actually work yet */ - ret = __ref_totlen(c, jeb, ref); - if (ret != ref->__totlen) { - printk(KERN_CRIT "Totlen for ref at %p (0x%08x-0x%08x) miscalculated as 0x%x instead of %x\n", - ref, ref_offset(ref), ref_offset(ref)+ref->__totlen, - ret, ref->__totlen); - if (!jeb) - jeb = &c->blocks[ref->flash_offset / c->sector_size]; - jffs2_dbg_dump_node_refs_nolock(c, jeb); - BUG(); - } -#endif - return ret; -} +#define ref_totlen(a, b, c) __jffs2_ref_totlen((a), (b), (c)) #define ALLOC_NORMAL 0 /* Normal allocation */ #define ALLOC_DELETION 1 /* Deletion node. Best to allow it */ @@ -268,13 +282,15 @@ static inline uint32_t ref_totlen(struct #define PAD(x) (((x)+3)&~3) -static inline struct jffs2_inode_cache *jffs2_raw_ref_to_ic(struct jffs2_raw_node_ref *raw) +static inline int jffs2_encode_dev(union jffs2_device_node *jdev, dev_t rdev) { - while(raw->next_in_ino) { - raw = raw->next_in_ino; + if (old_valid_dev(rdev)) { + jdev->old = cpu_to_je16(old_encode_dev(rdev)); + return sizeof(jdev->old); + } else { + jdev->new = cpu_to_je32(new_encode_dev(rdev)); + return sizeof(jdev->new); } - - return ((struct jffs2_inode_cache *)raw); } static inline struct jffs2_node_frag *frag_first(struct rb_root *root) @@ -324,28 +340,44 @@ void jffs2_obsolete_node_frag(struct jff int jffs2_add_full_dnode_to_inode(struct jffs2_sb_info *c, struct jffs2_inode_info *f, struct jffs2_full_dnode *fn); void jffs2_truncate_fragtree (struct jffs2_sb_info *c, struct rb_root *list, uint32_t size); int jffs2_add_older_frag_to_fragtree(struct jffs2_sb_info *c, struct jffs2_inode_info *f, struct jffs2_tmp_dnode_info *tn); +struct jffs2_raw_node_ref *jffs2_link_node_ref(struct jffs2_sb_info *c, + struct jffs2_eraseblock *jeb, + uint32_t ofs, uint32_t len, + struct jffs2_inode_cache *ic); +extern uint32_t __jffs2_ref_totlen(struct jffs2_sb_info *c, + struct jffs2_eraseblock *jeb, + struct jffs2_raw_node_ref *ref); /* nodemgmt.c */ int jffs2_thread_should_wake(struct jffs2_sb_info *c); -int jffs2_reserve_space(struct jffs2_sb_info *c, uint32_t minsize, uint32_t *ofs, +int jffs2_reserve_space(struct jffs2_sb_info *c, uint32_t minsize, uint32_t *len, int prio, uint32_t sumsize); -int jffs2_reserve_space_gc(struct jffs2_sb_info *c, uint32_t minsize, uint32_t *ofs, +int jffs2_reserve_space_gc(struct jffs2_sb_info *c, uint32_t minsize, uint32_t *len, uint32_t sumsize); -int jffs2_add_physical_node_ref(struct jffs2_sb_info *c, struct jffs2_raw_node_ref *new); +struct jffs2_raw_node_ref *jffs2_add_physical_node_ref(struct jffs2_sb_info *c, + uint32_t ofs, uint32_t len, + struct jffs2_inode_cache *ic); void jffs2_complete_reservation(struct jffs2_sb_info *c); void jffs2_mark_node_obsolete(struct jffs2_sb_info *c, struct jffs2_raw_node_ref *raw); /* write.c */ int jffs2_do_new_inode(struct jffs2_sb_info *c, struct jffs2_inode_info *f, uint32_t mode, struct jffs2_raw_inode *ri); -struct jffs2_full_dnode *jffs2_write_dnode(struct jffs2_sb_info *c, struct jffs2_inode_info *f, struct jffs2_raw_inode *ri, const unsigned char *data, uint32_t datalen, uint32_t flash_ofs, int alloc_mode); -struct jffs2_full_dirent *jffs2_write_dirent(struct jffs2_sb_info *c, struct jffs2_inode_info *f, struct jffs2_raw_dirent *rd, const unsigned char *name, uint32_t namelen, uint32_t flash_ofs, int alloc_mode); +struct jffs2_full_dnode *jffs2_write_dnode(struct jffs2_sb_info *c, struct jffs2_inode_info *f, + struct jffs2_raw_inode *ri, const unsigned char *data, + uint32_t datalen, int alloc_mode); +struct jffs2_full_dirent *jffs2_write_dirent(struct jffs2_sb_info *c, struct jffs2_inode_info *f, + struct jffs2_raw_dirent *rd, const unsigned char *name, + uint32_t namelen, int alloc_mode); int jffs2_write_inode_range(struct jffs2_sb_info *c, struct jffs2_inode_info *f, struct jffs2_raw_inode *ri, unsigned char *buf, uint32_t offset, uint32_t writelen, uint32_t *retlen); -int jffs2_do_create(struct jffs2_sb_info *c, struct jffs2_inode_info *dir_f, struct jffs2_inode_info *f, struct jffs2_raw_inode *ri, const char *name, int namelen); -int jffs2_do_unlink(struct jffs2_sb_info *c, struct jffs2_inode_info *dir_f, const char *name, int namelen, struct jffs2_inode_info *dead_f, uint32_t time); -int jffs2_do_link (struct jffs2_sb_info *c, struct jffs2_inode_info *dir_f, uint32_t ino, uint8_t type, const char *name, int namelen, uint32_t time); +int jffs2_do_create(struct jffs2_sb_info *c, struct jffs2_inode_info *dir_f, struct jffs2_inode_info *f, + struct jffs2_raw_inode *ri, const char *name, int namelen); +int jffs2_do_unlink(struct jffs2_sb_info *c, struct jffs2_inode_info *dir_f, const char *name, + int namelen, struct jffs2_inode_info *dead_f, uint32_t time); +int jffs2_do_link(struct jffs2_sb_info *c, struct jffs2_inode_info *dir_f, uint32_t ino, + uint8_t type, const char *name, int namelen, uint32_t time); /* readinode.c */ @@ -368,12 +400,19 @@ struct jffs2_raw_inode *jffs2_alloc_raw_ void jffs2_free_raw_inode(struct jffs2_raw_inode *); struct jffs2_tmp_dnode_info *jffs2_alloc_tmp_dnode_info(void); void jffs2_free_tmp_dnode_info(struct jffs2_tmp_dnode_info *); -struct jffs2_raw_node_ref *jffs2_alloc_raw_node_ref(void); -void jffs2_free_raw_node_ref(struct jffs2_raw_node_ref *); +int jffs2_prealloc_raw_node_refs(struct jffs2_sb_info *c, + struct jffs2_eraseblock *jeb, int nr); +void jffs2_free_refblock(struct jffs2_raw_node_ref *); struct jffs2_node_frag *jffs2_alloc_node_frag(void); void jffs2_free_node_frag(struct jffs2_node_frag *); struct jffs2_inode_cache *jffs2_alloc_inode_cache(void); void jffs2_free_inode_cache(struct jffs2_inode_cache *); +#ifdef CONFIG_JFFS2_FS_XATTR +struct jffs2_xattr_datum *jffs2_alloc_xattr_datum(void); +void jffs2_free_xattr_datum(struct jffs2_xattr_datum *); +struct jffs2_xattr_ref *jffs2_alloc_xattr_ref(void); +void jffs2_free_xattr_ref(struct jffs2_xattr_ref *); +#endif /* gc.c */ int jffs2_garbage_collect_pass(struct jffs2_sb_info *c); @@ -393,12 +432,14 @@ int jffs2_fill_scan_buf(struct jffs2_sb_ uint32_t ofs, uint32_t len); struct jffs2_inode_cache *jffs2_scan_make_ino_cache(struct jffs2_sb_info *c, uint32_t ino); int jffs2_scan_classify_jeb(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb); +int jffs2_scan_dirty_space(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb, uint32_t size); /* build.c */ int jffs2_do_mount_fs(struct jffs2_sb_info *c); /* erase.c */ void jffs2_erase_pending_blocks(struct jffs2_sb_info *c, int count); +void jffs2_free_jeb_node_refs(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb); #ifdef CONFIG_JFFS2_FS_WRITEBUFFER /* wbuf.c */ diff -puN fs/jffs2/nodemgmt.c~git-mtd fs/jffs2/nodemgmt.c --- devel/fs/jffs2/nodemgmt.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs2/nodemgmt.c 2006-05-29 15:02:34.000000000 -0700 @@ -23,13 +23,12 @@ * jffs2_reserve_space - request physical space to write nodes to flash * @c: superblock info * @minsize: Minimum acceptable size of allocation - * @ofs: Returned value of node offset * @len: Returned value of allocation length * @prio: Allocation type - ALLOC_{NORMAL,DELETION} * * Requests a block of physical space on the flash. Returns zero for success - * and puts 'ofs' and 'len' into the appriopriate place, or returns -ENOSPC - * or other error if appropriate. + * and puts 'len' into the appropriate place, or returns -ENOSPC or other + * error if appropriate. Doesn't return len since that's * * If it returns zero, jffs2_reserve_space() also downs the per-filesystem * allocation semaphore, to prevent more than one allocation from being @@ -40,9 +39,9 @@ */ static int jffs2_do_reserve_space(struct jffs2_sb_info *c, uint32_t minsize, - uint32_t *ofs, uint32_t *len, uint32_t sumsize); + uint32_t *len, uint32_t sumsize); -int jffs2_reserve_space(struct jffs2_sb_info *c, uint32_t minsize, uint32_t *ofs, +int jffs2_reserve_space(struct jffs2_sb_info *c, uint32_t minsize, uint32_t *len, int prio, uint32_t sumsize) { int ret = -EAGAIN; @@ -132,19 +131,21 @@ int jffs2_reserve_space(struct jffs2_sb_ spin_lock(&c->erase_completion_lock); } - ret = jffs2_do_reserve_space(c, minsize, ofs, len, sumsize); + ret = jffs2_do_reserve_space(c, minsize, len, sumsize); if (ret) { D1(printk(KERN_DEBUG "jffs2_reserve_space: ret is %d\n", ret)); } } spin_unlock(&c->erase_completion_lock); + if (!ret) + ret = jffs2_prealloc_raw_node_refs(c, c->nextblock, 1); if (ret) up(&c->alloc_sem); return ret; } -int jffs2_reserve_space_gc(struct jffs2_sb_info *c, uint32_t minsize, uint32_t *ofs, - uint32_t *len, uint32_t sumsize) +int jffs2_reserve_space_gc(struct jffs2_sb_info *c, uint32_t minsize, + uint32_t *len, uint32_t sumsize) { int ret = -EAGAIN; minsize = PAD(minsize); @@ -153,12 +154,15 @@ int jffs2_reserve_space_gc(struct jffs2_ spin_lock(&c->erase_completion_lock); while(ret == -EAGAIN) { - ret = jffs2_do_reserve_space(c, minsize, ofs, len, sumsize); + ret = jffs2_do_reserve_space(c, minsize, len, sumsize); if (ret) { D1(printk(KERN_DEBUG "jffs2_reserve_space_gc: looping, ret is %d\n", ret)); } } spin_unlock(&c->erase_completion_lock); + if (!ret) + ret = jffs2_prealloc_raw_node_refs(c, c->nextblock, 1); + return ret; } @@ -259,10 +263,11 @@ static int jffs2_find_nextblock(struct j } /* Called with alloc sem _and_ erase_completion_lock */ -static int jffs2_do_reserve_space(struct jffs2_sb_info *c, uint32_t minsize, uint32_t *ofs, uint32_t *len, uint32_t sumsize) +static int jffs2_do_reserve_space(struct jffs2_sb_info *c, uint32_t minsize, + uint32_t *len, uint32_t sumsize) { struct jffs2_eraseblock *jeb = c->nextblock; - uint32_t reserved_size; /* for summary information at the end of the jeb */ + uint32_t reserved_size; /* for summary information at the end of the jeb */ int ret; restart: @@ -349,7 +354,6 @@ static int jffs2_do_reserve_space(struct } /* OK, jeb (==c->nextblock) is now pointing at a block which definitely has enough space */ - *ofs = jeb->offset + (c->sector_size - jeb->free_size); *len = jeb->free_size - reserved_size; if (c->cleanmarker_size && jeb->used_size == c->cleanmarker_size && @@ -365,7 +369,8 @@ static int jffs2_do_reserve_space(struct spin_lock(&c->erase_completion_lock); } - D1(printk(KERN_DEBUG "jffs2_do_reserve_space(): Giving 0x%x bytes at 0x%x\n", *len, *ofs)); + D1(printk(KERN_DEBUG "jffs2_do_reserve_space(): Giving 0x%x bytes at 0x%x\n", + *len, jeb->offset + (c->sector_size - jeb->free_size))); return 0; } @@ -374,7 +379,6 @@ static int jffs2_do_reserve_space(struct * @c: superblock info * @new: new node reference to add * @len: length of this physical node - * @dirty: dirty flag for new node * * Should only be used to report nodes for which space has been allocated * by jffs2_reserve_space. @@ -382,42 +386,30 @@ static int jffs2_do_reserve_space(struct * Must be called with the alloc_sem held. */ -int jffs2_add_physical_node_ref(struct jffs2_sb_info *c, struct jffs2_raw_node_ref *new) +struct jffs2_raw_node_ref *jffs2_add_physical_node_ref(struct jffs2_sb_info *c, + uint32_t ofs, uint32_t len, + struct jffs2_inode_cache *ic) { struct jffs2_eraseblock *jeb; - uint32_t len; + struct jffs2_raw_node_ref *new; - jeb = &c->blocks[new->flash_offset / c->sector_size]; - len = ref_totlen(c, jeb, new); + jeb = &c->blocks[ofs / c->sector_size]; - D1(printk(KERN_DEBUG "jffs2_add_physical_node_ref(): Node at 0x%x(%d), size 0x%x\n", ref_offset(new), ref_flags(new), len)); + D1(printk(KERN_DEBUG "jffs2_add_physical_node_ref(): Node at 0x%x(%d), size 0x%x\n", + ofs & ~3, ofs & 3, len)); #if 1 - /* we could get some obsolete nodes after nextblock was refiled - in wbuf.c */ - if ((c->nextblock || !ref_obsolete(new)) - &&(jeb != c->nextblock || ref_offset(new) != jeb->offset + (c->sector_size - jeb->free_size))) { + /* Allow non-obsolete nodes only to be added at the end of c->nextblock, + if c->nextblock is set. Note that wbuf.c will file obsolete nodes + even after refiling c->nextblock */ + if ((c->nextblock || ((ofs & 3) != REF_OBSOLETE)) + && (jeb != c->nextblock || (ofs & ~3) != jeb->offset + (c->sector_size - jeb->free_size))) { printk(KERN_WARNING "argh. node added in wrong place\n"); - jffs2_free_raw_node_ref(new); - return -EINVAL; + return ERR_PTR(-EINVAL); } #endif spin_lock(&c->erase_completion_lock); - if (!jeb->first_node) - jeb->first_node = new; - if (jeb->last_node) - jeb->last_node->next_phys = new; - jeb->last_node = new; - - jeb->free_size -= len; - c->free_size -= len; - if (ref_obsolete(new)) { - jeb->dirty_size += len; - c->dirty_size += len; - } else { - jeb->used_size += len; - c->used_size += len; - } + new = jffs2_link_node_ref(c, jeb, ofs, len, ic); if (!jeb->free_size && !jeb->dirty_size && !ISDIRTY(jeb->wasted_size)) { /* If it lives on the dirty_list, jffs2_reserve_space will put it there */ @@ -438,7 +430,7 @@ int jffs2_add_physical_node_ref(struct j spin_unlock(&c->erase_completion_lock); - return 0; + return new; } @@ -470,8 +462,9 @@ void jffs2_mark_node_obsolete(struct jff struct jffs2_unknown_node n; int ret, addedsize; size_t retlen; + uint32_t freed_len; - if(!ref) { + if(unlikely(!ref)) { printk(KERN_NOTICE "EEEEEK. jffs2_mark_node_obsolete called with NULL node\n"); return; } @@ -499,32 +492,34 @@ void jffs2_mark_node_obsolete(struct jff spin_lock(&c->erase_completion_lock); + freed_len = ref_totlen(c, jeb, ref); + if (ref_flags(ref) == REF_UNCHECKED) { - D1(if (unlikely(jeb->unchecked_size < ref_totlen(c, jeb, ref))) { + D1(if (unlikely(jeb->unchecked_size < freed_len)) { printk(KERN_NOTICE "raw unchecked node of size 0x%08x freed from erase block %d at 0x%08x, but unchecked_size was already 0x%08x\n", - ref_totlen(c, jeb, ref), blocknr, ref->flash_offset, jeb->used_size); + freed_len, blocknr, ref->flash_offset, jeb->used_size); BUG(); }) - D1(printk(KERN_DEBUG "Obsoleting previously unchecked node at 0x%08x of len %x: ", ref_offset(ref), ref_totlen(c, jeb, ref))); - jeb->unchecked_size -= ref_totlen(c, jeb, ref); - c->unchecked_size -= ref_totlen(c, jeb, ref); + D1(printk(KERN_DEBUG "Obsoleting previously unchecked node at 0x%08x of len %x: ", ref_offset(ref), freed_len)); + jeb->unchecked_size -= freed_len; + c->unchecked_size -= freed_len; } else { - D1(if (unlikely(jeb->used_size < ref_totlen(c, jeb, ref))) { + D1(if (unlikely(jeb->used_size < freed_len)) { printk(KERN_NOTICE "raw node of size 0x%08x freed from erase block %d at 0x%08x, but used_size was already 0x%08x\n", - ref_totlen(c, jeb, ref), blocknr, ref->flash_offset, jeb->used_size); + freed_len, blocknr, ref->flash_offset, jeb->used_size); BUG(); }) - D1(printk(KERN_DEBUG "Obsoleting node at 0x%08x of len %#x: ", ref_offset(ref), ref_totlen(c, jeb, ref))); - jeb->used_size -= ref_totlen(c, jeb, ref); - c->used_size -= ref_totlen(c, jeb, ref); + D1(printk(KERN_DEBUG "Obsoleting node at 0x%08x of len %#x: ", ref_offset(ref), freed_len)); + jeb->used_size -= freed_len; + c->used_size -= freed_len; } // Take care, that wasted size is taken into concern - if ((jeb->dirty_size || ISDIRTY(jeb->wasted_size + ref_totlen(c, jeb, ref))) && jeb != c->nextblock) { - D1(printk(KERN_DEBUG "Dirtying\n")); - addedsize = ref_totlen(c, jeb, ref); - jeb->dirty_size += ref_totlen(c, jeb, ref); - c->dirty_size += ref_totlen(c, jeb, ref); + if ((jeb->dirty_size || ISDIRTY(jeb->wasted_size + freed_len)) && jeb != c->nextblock) { + D1(printk("Dirtying\n")); + addedsize = freed_len; + jeb->dirty_size += freed_len; + c->dirty_size += freed_len; /* Convert wasted space to dirty, if not a bad block */ if (jeb->wasted_size) { @@ -543,10 +538,10 @@ void jffs2_mark_node_obsolete(struct jff } } } else { - D1(printk(KERN_DEBUG "Wasting\n")); + D1(printk("Wasting\n")); addedsize = 0; - jeb->wasted_size += ref_totlen(c, jeb, ref); - c->wasted_size += ref_totlen(c, jeb, ref); + jeb->wasted_size += freed_len; + c->wasted_size += freed_len; } ref->flash_offset = ref_offset(ref) | REF_OBSOLETE; @@ -622,7 +617,7 @@ void jffs2_mark_node_obsolete(struct jff /* The erase_free_sem is locked, and has been since before we marked the node obsolete and potentially put its eraseblock onto the erase_pending_list. Thus, we know that the block hasn't _already_ been erased, and that 'ref' itself hasn't been freed yet - by jffs2_free_all_node_refs() in erase.c. Which is nice. */ + by jffs2_free_jeb_node_refs() in erase.c. Which is nice. */ D1(printk(KERN_DEBUG "obliterating obsoleted node at 0x%08x\n", ref_offset(ref))); ret = jffs2_flash_read(c, ref_offset(ref), sizeof(n), &retlen, (char *)&n); @@ -634,8 +629,8 @@ void jffs2_mark_node_obsolete(struct jff printk(KERN_WARNING "Short read from obsoleted node at 0x%08x: %zd\n", ref_offset(ref), retlen); goto out_erase_sem; } - if (PAD(je32_to_cpu(n.totlen)) != PAD(ref_totlen(c, jeb, ref))) { - printk(KERN_WARNING "Node totlen on flash (0x%08x) != totlen from node ref (0x%08x)\n", je32_to_cpu(n.totlen), ref_totlen(c, jeb, ref)); + if (PAD(je32_to_cpu(n.totlen)) != PAD(freed_len)) { + printk(KERN_WARNING "Node totlen on flash (0x%08x) != totlen from node ref (0x%08x)\n", je32_to_cpu(n.totlen), freed_len); goto out_erase_sem; } if (!(je16_to_cpu(n.nodetype) & JFFS2_NODE_ACCURATE)) { @@ -671,6 +666,10 @@ void jffs2_mark_node_obsolete(struct jff spin_lock(&c->erase_completion_lock); ic = jffs2_raw_ref_to_ic(ref); + /* It seems we should never call jffs2_mark_node_obsolete() for + XATTR nodes.... yet. Make sure we notice if/when we change + that :) */ + BUG_ON(ic->class != RAWNODE_CLASS_INODE_CACHE); for (p = &ic->nodes; (*p) != ref; p = &((*p)->next_in_ino)) ; @@ -683,51 +682,6 @@ void jffs2_mark_node_obsolete(struct jff spin_unlock(&c->erase_completion_lock); } - - /* Merge with the next node in the physical list, if there is one - and if it's also obsolete and if it doesn't belong to any inode */ - if (ref->next_phys && ref_obsolete(ref->next_phys) && - !ref->next_phys->next_in_ino) { - struct jffs2_raw_node_ref *n = ref->next_phys; - - spin_lock(&c->erase_completion_lock); - - ref->__totlen += n->__totlen; - ref->next_phys = n->next_phys; - if (jeb->last_node == n) jeb->last_node = ref; - if (jeb->gc_node == n) { - /* gc will be happy continuing gc on this node */ - jeb->gc_node=ref; - } - spin_unlock(&c->erase_completion_lock); - - jffs2_free_raw_node_ref(n); - } - - /* Also merge with the previous node in the list, if there is one - and that one is obsolete */ - if (ref != jeb->first_node ) { - struct jffs2_raw_node_ref *p = jeb->first_node; - - spin_lock(&c->erase_completion_lock); - - while (p->next_phys != ref) - p = p->next_phys; - - if (ref_obsolete(p) && !ref->next_in_ino) { - p->__totlen += ref->__totlen; - if (jeb->last_node == ref) { - jeb->last_node = p; - } - if (jeb->gc_node == ref) { - /* gc will be happy continuing gc on this node */ - jeb->gc_node=p; - } - p->next_phys = ref->next_phys; - jffs2_free_raw_node_ref(ref); - } - spin_unlock(&c->erase_completion_lock); - } out_erase_sem: up(&c->erase_free_sem); } diff -puN fs/jffs2/os-linux.h~git-mtd fs/jffs2/os-linux.h --- devel/fs/jffs2/os-linux.h~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs2/os-linux.h 2006-05-29 15:02:34.000000000 -0700 @@ -31,9 +31,7 @@ struct kvec; #define JFFS2_F_I_MODE(f) (OFNI_EDONI_2SFFJ(f)->i_mode) #define JFFS2_F_I_UID(f) (OFNI_EDONI_2SFFJ(f)->i_uid) #define JFFS2_F_I_GID(f) (OFNI_EDONI_2SFFJ(f)->i_gid) - -#define JFFS2_F_I_RDEV_MIN(f) (iminor(OFNI_EDONI_2SFFJ(f))) -#define JFFS2_F_I_RDEV_MAJ(f) (imajor(OFNI_EDONI_2SFFJ(f))) +#define JFFS2_F_I_RDEV(f) (OFNI_EDONI_2SFFJ(f)->i_rdev) #define ITIME(sec) ((struct timespec){sec, 0}) #define I_SEC(tv) ((tv).tv_sec) @@ -60,6 +58,10 @@ static inline void jffs2_init_inode_info f->target = NULL; f->flags = 0; f->usercompr = 0; +#ifdef CONFIG_JFFS2_FS_POSIX_ACL + f->i_acl_access = JFFS2_ACL_NOT_CACHED; + f->i_acl_default = JFFS2_ACL_NOT_CACHED; +#endif } @@ -90,13 +92,10 @@ static inline void jffs2_init_inode_info #define jffs2_flash_writev(a,b,c,d,e,f) jffs2_flash_direct_writev(a,b,c,d,e) #define jffs2_wbuf_timeout NULL #define jffs2_wbuf_process NULL -#define jffs2_nor_ecc(c) (0) #define jffs2_dataflash(c) (0) -#define jffs2_nor_wbuf_flash(c) (0) -#define jffs2_nor_ecc_flash_setup(c) (0) -#define jffs2_nor_ecc_flash_cleanup(c) do {} while (0) #define jffs2_dataflash_setup(c) (0) #define jffs2_dataflash_cleanup(c) do {} while (0) +#define jffs2_nor_wbuf_flash(c) (0) #define jffs2_nor_wbuf_flash_setup(c) (0) #define jffs2_nor_wbuf_flash_cleanup(c) do {} while (0) @@ -107,9 +106,7 @@ static inline void jffs2_init_inode_info #ifdef CONFIG_JFFS2_SUMMARY #define jffs2_can_mark_obsolete(c) (0) #else -#define jffs2_can_mark_obsolete(c) \ - ((c->mtd->type == MTD_NORFLASH && !(c->mtd->flags & (MTD_ECC|MTD_PROGRAM_REGIONS))) || \ - c->mtd->type == MTD_RAM) +#define jffs2_can_mark_obsolete(c) (c->mtd->flags & (MTD_BIT_WRITEABLE)) #endif #define jffs2_cleanmarker_oob(c) (c->mtd->type == MTD_NANDFLASH) @@ -133,15 +130,11 @@ int jffs2_flush_wbuf_pad(struct jffs2_sb int jffs2_nand_flash_setup(struct jffs2_sb_info *c); void jffs2_nand_flash_cleanup(struct jffs2_sb_info *c); -#define jffs2_nor_ecc(c) (c->mtd->type == MTD_NORFLASH && (c->mtd->flags & MTD_ECC)) -int jffs2_nor_ecc_flash_setup(struct jffs2_sb_info *c); -void jffs2_nor_ecc_flash_cleanup(struct jffs2_sb_info *c); - #define jffs2_dataflash(c) (c->mtd->type == MTD_DATAFLASH) int jffs2_dataflash_setup(struct jffs2_sb_info *c); void jffs2_dataflash_cleanup(struct jffs2_sb_info *c); -#define jffs2_nor_wbuf_flash(c) (c->mtd->type == MTD_NORFLASH && (c->mtd->flags & MTD_PROGRAM_REGIONS)) +#define jffs2_nor_wbuf_flash(c) (c->mtd->type == MTD_NORFLASH && ! (c->mtd->flags & MTD_BIT_WRITEABLE)) int jffs2_nor_wbuf_flash_setup(struct jffs2_sb_info *c); void jffs2_nor_wbuf_flash_cleanup(struct jffs2_sb_info *c); diff -puN fs/jffs2/readinode.c~git-mtd fs/jffs2/readinode.c --- devel/fs/jffs2/readinode.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs2/readinode.c 2006-05-29 15:02:34.000000000 -0700 @@ -204,7 +204,7 @@ static inline int read_dnode(struct jffs tn = jffs2_alloc_tmp_dnode_info(); if (!tn) { - JFFS2_ERROR("failed to allocate tn (%d bytes).\n", sizeof(*tn)); + JFFS2_ERROR("failed to allocate tn (%zu bytes).\n", sizeof(*tn)); return -ENOMEM; } @@ -434,7 +434,7 @@ static int read_more(struct jffs2_sb_inf } if (retlen < len) { - JFFS2_ERROR("short read at %#08x: %d instead of %d.\n", + JFFS2_ERROR("short read at %#08x: %zu instead of %d.\n", offs, retlen, len); return -EIO; } @@ -542,7 +542,7 @@ static int jffs2_get_inode_nodes(struct } if (retlen < len) { - JFFS2_ERROR("short read at %#08x: %d instead of %d.\n", ref_offset(ref), retlen, len); + JFFS2_ERROR("short read at %#08x: %zu instead of %d.\n", ref_offset(ref), retlen, len); err = -EIO; goto free_out; } diff -puN fs/jffs2/README.Locking~git-mtd fs/jffs2/README.Locking --- devel/fs/jffs2/README.Locking~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs2/README.Locking 2006-05-29 15:02:34.000000000 -0700 @@ -150,3 +150,24 @@ the buffer. Ordering constraints: Lock wbuf_sem last, after the alloc_sem or and f->sem. + + + c->xattr_sem + ------------ + +This read/write semaphore protects against concurrent access to the +xattr related objects which include stuff in superblock and ic->xref. +In read-only path, write-semaphore is too much exclusion. It's enough +by read-semaphore. But you must hold write-semaphore when updating, +creating or deleting any xattr related object. + +Once xattr_sem released, there would be no assurance for the existence +of those objects. Thus, a series of processes is often required to retry, +when updating such a object is necessary under holding read semaphore. +For example, do_jffs2_getxattr() holds read-semaphore to scan xref and +xdatum at first. But it retries this process with holding write-semaphore +after release read-semaphore, if it's necessary to load name/value pair +from medium. + +Ordering constraints: + Lock xattr_sem last, after the alloc_sem. diff -puN fs/jffs2/scan.c~git-mtd fs/jffs2/scan.c --- devel/fs/jffs2/scan.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs2/scan.c 2006-05-29 15:02:34.000000000 -0700 @@ -65,6 +65,28 @@ static inline uint32_t EMPTY_SCAN_SIZE(u return DEFAULT_EMPTY_SCAN_SIZE; } +static int file_dirty(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb) +{ + int ret; + + if ((ret = jffs2_prealloc_raw_node_refs(c, jeb, 1))) + return ret; + if ((ret = jffs2_scan_dirty_space(c, jeb, jeb->free_size))) + return ret; + /* Turned wasted size into dirty, since we apparently + think it's recoverable now. */ + jeb->dirty_size += jeb->wasted_size; + c->dirty_size += jeb->wasted_size; + c->wasted_size -= jeb->wasted_size; + jeb->wasted_size = 0; + if (VERYDIRTY(c, jeb->dirty_size)) { + list_add(&jeb->list, &c->very_dirty_list); + } else { + list_add(&jeb->list, &c->dirty_list); + } + return 0; +} + int jffs2_scan_medium(struct jffs2_sb_info *c) { int i, ret; @@ -170,34 +192,20 @@ int jffs2_scan_medium(struct jffs2_sb_in (!c->nextblock || c->nextblock->free_size < jeb->free_size)) { /* Better candidate for the next writes to go to */ if (c->nextblock) { - c->nextblock->dirty_size += c->nextblock->free_size + c->nextblock->wasted_size; - c->dirty_size += c->nextblock->free_size + c->nextblock->wasted_size; - c->free_size -= c->nextblock->free_size; - c->wasted_size -= c->nextblock->wasted_size; - c->nextblock->free_size = c->nextblock->wasted_size = 0; - if (VERYDIRTY(c, c->nextblock->dirty_size)) { - list_add(&c->nextblock->list, &c->very_dirty_list); - } else { - list_add(&c->nextblock->list, &c->dirty_list); - } + ret = file_dirty(c, c->nextblock); + if (ret) + return ret; /* deleting summary information of the old nextblock */ jffs2_sum_reset_collected(c->summary); } - /* update collected summary infromation for the current nextblock */ + /* update collected summary information for the current nextblock */ jffs2_sum_move_collected(c, s); D1(printk(KERN_DEBUG "jffs2_scan_medium(): new nextblock = 0x%08x\n", jeb->offset)); c->nextblock = jeb; } else { - jeb->dirty_size += jeb->free_size + jeb->wasted_size; - c->dirty_size += jeb->free_size + jeb->wasted_size; - c->free_size -= jeb->free_size; - c->wasted_size -= jeb->wasted_size; - jeb->free_size = jeb->wasted_size = 0; - if (VERYDIRTY(c, jeb->dirty_size)) { - list_add(&jeb->list, &c->very_dirty_list); - } else { - list_add(&jeb->list, &c->dirty_list); - } + ret = file_dirty(c, jeb); + if (ret) + return ret; } break; @@ -222,9 +230,6 @@ int jffs2_scan_medium(struct jffs2_sb_in } } - if (jffs2_sum_active() && s) - kfree(s); - /* Nextblock dirty is always seen as wasted, because we cannot recycle it now */ if (c->nextblock && (c->nextblock->dirty_size)) { c->nextblock->wasted_size += c->nextblock->dirty_size; @@ -242,11 +247,8 @@ int jffs2_scan_medium(struct jffs2_sb_in D1(printk(KERN_DEBUG "jffs2_scan_medium(): Skipping %d bytes in nextblock to ensure page alignment\n", skip)); - c->nextblock->wasted_size += skip; - c->wasted_size += skip; - - c->nextblock->free_size -= skip; - c->free_size -= skip; + jffs2_prealloc_raw_node_refs(c, c->nextblock, 1); + jffs2_scan_dirty_space(c, c->nextblock, skip); } #endif if (c->nr_erasing_blocks) { @@ -266,6 +268,9 @@ int jffs2_scan_medium(struct jffs2_sb_in else c->mtd->unpoint(c->mtd, flashbuf, 0, c->mtd->size); #endif + if (s) + kfree(s); + return ret; } @@ -290,7 +295,7 @@ int jffs2_fill_scan_buf (struct jffs2_sb int jffs2_scan_classify_jeb(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb) { if ((jeb->used_size + jeb->unchecked_size) == PAD(c->cleanmarker_size) && !jeb->dirty_size - && (!jeb->first_node || !jeb->first_node->next_phys) ) + && (!jeb->first_node || !ref_next(jeb->first_node)) ) return BLK_STATE_CLEANMARKER; /* move blocks with max 4 byte dirty space to cleanlist */ @@ -306,11 +311,119 @@ int jffs2_scan_classify_jeb(struct jffs2 return BLK_STATE_ALLDIRTY; } +#ifdef CONFIG_JFFS2_FS_XATTR +static int jffs2_scan_xattr_node(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb, + struct jffs2_raw_xattr *rx, uint32_t ofs, + struct jffs2_summary *s) +{ + struct jffs2_xattr_datum *xd; + uint32_t totlen, crc; + int err; + + crc = crc32(0, rx, sizeof(struct jffs2_raw_xattr) - 4); + if (crc != je32_to_cpu(rx->node_crc)) { + if (je32_to_cpu(rx->node_crc) != 0xffffffff) + JFFS2_WARNING("node CRC failed at %#08x, read=%#08x, calc=%#08x\n", + ofs, je32_to_cpu(rx->node_crc), crc); + if ((err = jffs2_scan_dirty_space(c, jeb, je32_to_cpu(rx->totlen)))) + return err; + return 0; + } + + totlen = PAD(sizeof(*rx) + rx->name_len + 1 + je16_to_cpu(rx->value_len)); + if (totlen != je32_to_cpu(rx->totlen)) { + JFFS2_WARNING("node length mismatch at %#08x, read=%u, calc=%u\n", + ofs, je32_to_cpu(rx->totlen), totlen); + if ((err = jffs2_scan_dirty_space(c, jeb, je32_to_cpu(rx->totlen)))) + return err; + return 0; + } + + xd = jffs2_setup_xattr_datum(c, je32_to_cpu(rx->xid), je32_to_cpu(rx->version)); + if (IS_ERR(xd)) { + if (PTR_ERR(xd) == -EEXIST) { + if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(rx->totlen))))) + return err; + return 0; + } + return PTR_ERR(xd); + } + xd->xprefix = rx->xprefix; + xd->name_len = rx->name_len; + xd->value_len = je16_to_cpu(rx->value_len); + xd->data_crc = je32_to_cpu(rx->data_crc); + + xd->node = jffs2_link_node_ref(c, jeb, ofs | REF_PRISTINE, totlen, NULL); + /* FIXME */ xd->node->next_in_ino = (void *)xd; + + if (jffs2_sum_active()) + jffs2_sum_add_xattr_mem(s, rx, ofs - jeb->offset); + dbg_xattr("scaning xdatum at %#08x (xid=%u, version=%u)\n", + ofs, xd->xid, xd->version); + return 0; +} + +static int jffs2_scan_xref_node(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb, + struct jffs2_raw_xref *rr, uint32_t ofs, + struct jffs2_summary *s) +{ + struct jffs2_xattr_ref *ref; + uint32_t crc; + int err; + + crc = crc32(0, rr, sizeof(*rr) - 4); + if (crc != je32_to_cpu(rr->node_crc)) { + if (je32_to_cpu(rr->node_crc) != 0xffffffff) + JFFS2_WARNING("node CRC failed at %#08x, read=%#08x, calc=%#08x\n", + ofs, je32_to_cpu(rr->node_crc), crc); + if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(rr->totlen))))) + return err; + return 0; + } + + if (PAD(sizeof(struct jffs2_raw_xref)) != je32_to_cpu(rr->totlen)) { + JFFS2_WARNING("node length mismatch at %#08x, read=%u, calc=%zd\n", + ofs, je32_to_cpu(rr->totlen), + PAD(sizeof(struct jffs2_raw_xref))); + if ((err = jffs2_scan_dirty_space(c, jeb, je32_to_cpu(rr->totlen)))) + return err; + return 0; + } + + ref = jffs2_alloc_xattr_ref(); + if (!ref) + return -ENOMEM; + + /* BEFORE jffs2_build_xattr_subsystem() called, + * ref->xid is used to store 32bit xid, xd is not used + * ref->ino is used to store 32bit inode-number, ic is not used + * Thoes variables are declared as union, thus using those + * are exclusive. In a similar way, ref->next is temporarily + * used to chain all xattr_ref object. It's re-chained to + * jffs2_inode_cache in jffs2_build_xattr_subsystem() correctly. + */ + ref->ino = je32_to_cpu(rr->ino); + ref->xid = je32_to_cpu(rr->xid); + ref->next = c->xref_temp; + c->xref_temp = ref; + + ref->node = jffs2_link_node_ref(c, jeb, ofs | REF_PRISTINE, PAD(je32_to_cpu(rr->totlen)), NULL); + /* FIXME */ ref->node->next_in_ino = (void *)ref; + + if (jffs2_sum_active()) + jffs2_sum_add_xref_mem(s, rr, ofs - jeb->offset); + dbg_xattr("scan xref at %#08x (xid=%u, ino=%u)\n", + ofs, ref->xid, ref->ino); + return 0; +} +#endif + +/* Called with 'buf_size == 0' if buf is in fact a pointer _directly_ into + the flash, XIP-style */ static int jffs2_scan_eraseblock (struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb, - unsigned char *buf, uint32_t buf_size, struct jffs2_summary *s) { + unsigned char *buf, uint32_t buf_size, struct jffs2_summary *s) { struct jffs2_unknown_node *node; struct jffs2_unknown_node crcnode; - struct jffs2_sum_marker *sm; uint32_t ofs, prevofs; uint32_t hdr_crc, buf_ofs, buf_len; int err; @@ -344,44 +457,75 @@ static int jffs2_scan_eraseblock (struct #endif if (jffs2_sum_active()) { - sm = kmalloc(sizeof(struct jffs2_sum_marker), GFP_KERNEL); - if (!sm) { - return -ENOMEM; - } - - err = jffs2_fill_scan_buf(c, (unsigned char *) sm, jeb->offset + c->sector_size - - sizeof(struct jffs2_sum_marker), sizeof(struct jffs2_sum_marker)); - if (err) { - kfree(sm); - return err; - } - - if (je32_to_cpu(sm->magic) == JFFS2_SUM_MAGIC ) { - err = jffs2_sum_scan_sumnode(c, jeb, je32_to_cpu(sm->offset), &pseudo_random); - if (err) { - kfree(sm); + struct jffs2_sum_marker *sm; + void *sumptr = NULL; + uint32_t sumlen; + + if (!buf_size) { + /* XIP case. Just look, point at the summary if it's there */ + sm = (void *)buf + jeb->offset - sizeof(*sm); + if (je32_to_cpu(sm->magic) == JFFS2_SUM_MAGIC) { + sumptr = buf + je32_to_cpu(sm->offset); + sumlen = c->sector_size - je32_to_cpu(sm->offset); + } + } else { + /* If NAND flash, read a whole page of it. Else just the end */ + if (c->wbuf_pagesize) + buf_len = c->wbuf_pagesize; + else + buf_len = sizeof(*sm); + + /* Read as much as we want into the _end_ of the preallocated buffer */ + err = jffs2_fill_scan_buf(c, buf + buf_size - buf_len, + jeb->offset + c->sector_size - buf_len, + buf_len); + if (err) return err; + + sm = (void *)buf + buf_size - sizeof(*sm); + if (je32_to_cpu(sm->magic) == JFFS2_SUM_MAGIC) { + sumlen = c->sector_size - je32_to_cpu(sm->offset); + sumptr = buf + buf_size - sumlen; + + /* Now, make sure the summary itself is available */ + if (sumlen > buf_size) { + /* Need to kmalloc for this. */ + sumptr = kmalloc(sumlen, GFP_KERNEL); + if (!sumptr) + return -ENOMEM; + memcpy(sumptr + sumlen - buf_len, buf + buf_size - buf_len, buf_len); + } + if (buf_len < sumlen) { + /* Need to read more so that the entire summary node is present */ + err = jffs2_fill_scan_buf(c, sumptr, + jeb->offset + c->sector_size - sumlen, + sumlen - buf_len); + if (err) + return err; + } } + } - kfree(sm); + if (sumptr) { + err = jffs2_sum_scan_sumnode(c, jeb, sumptr, sumlen, &pseudo_random); - ofs = jeb->offset; - prevofs = jeb->offset - 1; + if (buf_size && sumlen > buf_size) + kfree(sumptr); + /* If it returns with a real error, bail. + If it returns positive, that's a block classification + (i.e. BLK_STATE_xxx) so return that too. + If it returns zero, fall through to full scan. */ + if (err) + return err; + } } buf_ofs = jeb->offset; if (!buf_size) { + /* This is the XIP case -- we're reading _directly_ from the flash chip */ buf_len = c->sector_size; - - if (jffs2_sum_active()) { - /* must reread because of summary test */ - err = jffs2_fill_scan_buf(c, buf, buf_ofs, buf_len); - if (err) - return err; - } - } else { buf_len = EMPTY_SCAN_SIZE(c->sector_size); err = jffs2_fill_scan_buf(c, buf, buf_ofs, buf_len); @@ -418,7 +562,10 @@ static int jffs2_scan_eraseblock (struct if (ofs) { D1(printk(KERN_DEBUG "Free space at %08x ends at %08x\n", jeb->offset, jeb->offset + ofs)); - DIRTY_SPACE(ofs); + if ((err = jffs2_prealloc_raw_node_refs(c, jeb, 1))) + return err; + if ((err = jffs2_scan_dirty_space(c, jeb, ofs))) + return err; } /* Now ofs is a complete physical flash offset as it always was... */ @@ -433,6 +580,11 @@ scan_more: jffs2_dbg_acct_paranoia_check_nolock(c, jeb); + /* Make sure there are node refs available for use */ + err = jffs2_prealloc_raw_node_refs(c, jeb, 2); + if (err) + return err; + cond_resched(); if (ofs & 3) { @@ -442,7 +594,8 @@ scan_more: } if (ofs == prevofs) { printk(KERN_WARNING "ofs 0x%08x has already been seen. Skipping\n", ofs); - DIRTY_SPACE(4); + if ((err = jffs2_scan_dirty_space(c, jeb, 4))) + return err; ofs += 4; continue; } @@ -451,7 +604,8 @@ scan_more: if (jeb->offset + c->sector_size < ofs + sizeof(*node)) { D1(printk(KERN_DEBUG "Fewer than %zd bytes left to end of block. (%x+%x<%x+%zx) Not reading\n", sizeof(struct jffs2_unknown_node), jeb->offset, c->sector_size, ofs, sizeof(*node))); - DIRTY_SPACE((jeb->offset + c->sector_size)-ofs); + if ((err = jffs2_scan_dirty_space(c, jeb, (jeb->offset + c->sector_size)-ofs))) + return err; break; } @@ -481,7 +635,8 @@ scan_more: if (*(uint32_t *)(&buf[inbuf_ofs]) != 0xffffffff) { printk(KERN_WARNING "Empty flash at 0x%08x ends at 0x%08x\n", empty_start, ofs); - DIRTY_SPACE(ofs-empty_start); + if ((err = jffs2_scan_dirty_space(c, jeb, ofs-empty_start))) + return err; goto scan_more; } @@ -494,7 +649,7 @@ scan_more: /* If we're only checking the beginning of a block with a cleanmarker, bail now */ if (buf_ofs == jeb->offset && jeb->used_size == PAD(c->cleanmarker_size) && - c->cleanmarker_size && !jeb->dirty_size && !jeb->first_node->next_phys) { + c->cleanmarker_size && !jeb->dirty_size && !ref_next(jeb->first_node)) { D1(printk(KERN_DEBUG "%d bytes at start of block seems clean... assuming all clean\n", EMPTY_SCAN_SIZE(c->sector_size))); return BLK_STATE_CLEANMARKER; } @@ -518,20 +673,23 @@ scan_more: if (ofs == jeb->offset && je16_to_cpu(node->magic) == KSAMTIB_CIGAM_2SFFJ) { printk(KERN_WARNING "Magic bitmask is backwards at offset 0x%08x. Wrong endian filesystem?\n", ofs); - DIRTY_SPACE(4); + if ((err = jffs2_scan_dirty_space(c, jeb, 4))) + return err; ofs += 4; continue; } if (je16_to_cpu(node->magic) == JFFS2_DIRTY_BITMASK) { D1(printk(KERN_DEBUG "Dirty bitmask at 0x%08x\n", ofs)); - DIRTY_SPACE(4); + if ((err = jffs2_scan_dirty_space(c, jeb, 4))) + return err; ofs += 4; continue; } if (je16_to_cpu(node->magic) == JFFS2_OLD_MAGIC_BITMASK) { printk(KERN_WARNING "Old JFFS2 bitmask found at 0x%08x\n", ofs); printk(KERN_WARNING "You cannot use older JFFS2 filesystems with newer kernels\n"); - DIRTY_SPACE(4); + if ((err = jffs2_scan_dirty_space(c, jeb, 4))) + return err; ofs += 4; continue; } @@ -540,7 +698,8 @@ scan_more: noisy_printk(&noise, "jffs2_scan_eraseblock(): Magic bitmask 0x%04x not found at 0x%08x: 0x%04x instead\n", JFFS2_MAGIC_BITMASK, ofs, je16_to_cpu(node->magic)); - DIRTY_SPACE(4); + if ((err = jffs2_scan_dirty_space(c, jeb, 4))) + return err; ofs += 4; continue; } @@ -557,7 +716,8 @@ scan_more: je32_to_cpu(node->totlen), je32_to_cpu(node->hdr_crc), hdr_crc); - DIRTY_SPACE(4); + if ((err = jffs2_scan_dirty_space(c, jeb, 4))) + return err; ofs += 4; continue; } @@ -568,7 +728,8 @@ scan_more: printk(KERN_WARNING "Node at 0x%08x with length 0x%08x would run over the end of the erase block\n", ofs, je32_to_cpu(node->totlen)); printk(KERN_WARNING "Perhaps the file system was created with the wrong erase size?\n"); - DIRTY_SPACE(4); + if ((err = jffs2_scan_dirty_space(c, jeb, 4))) + return err; ofs += 4; continue; } @@ -576,7 +737,8 @@ scan_more: if (!(je16_to_cpu(node->nodetype) & JFFS2_NODE_ACCURATE)) { /* Wheee. This is an obsoleted node */ D2(printk(KERN_DEBUG "Node at 0x%08x is obsolete. Skipping\n", ofs)); - DIRTY_SPACE(PAD(je32_to_cpu(node->totlen))); + if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(node->totlen))))) + return err; ofs += PAD(je32_to_cpu(node->totlen)); continue; } @@ -614,30 +776,59 @@ scan_more: ofs += PAD(je32_to_cpu(node->totlen)); break; +#ifdef CONFIG_JFFS2_FS_XATTR + case JFFS2_NODETYPE_XATTR: + if (buf_ofs + buf_len < ofs + je32_to_cpu(node->totlen)) { + buf_len = min_t(uint32_t, buf_size, jeb->offset + c->sector_size - ofs); + D1(printk(KERN_DEBUG "Fewer than %d bytes (xattr node)" + " left to end of buf. Reading 0x%x at 0x%08x\n", + je32_to_cpu(node->totlen), buf_len, ofs)); + err = jffs2_fill_scan_buf(c, buf, ofs, buf_len); + if (err) + return err; + buf_ofs = ofs; + node = (void *)buf; + } + err = jffs2_scan_xattr_node(c, jeb, (void *)node, ofs, s); + if (err) + return err; + ofs += PAD(je32_to_cpu(node->totlen)); + break; + case JFFS2_NODETYPE_XREF: + if (buf_ofs + buf_len < ofs + je32_to_cpu(node->totlen)) { + buf_len = min_t(uint32_t, buf_size, jeb->offset + c->sector_size - ofs); + D1(printk(KERN_DEBUG "Fewer than %d bytes (xref node)" + " left to end of buf. Reading 0x%x at 0x%08x\n", + je32_to_cpu(node->totlen), buf_len, ofs)); + err = jffs2_fill_scan_buf(c, buf, ofs, buf_len); + if (err) + return err; + buf_ofs = ofs; + node = (void *)buf; + } + err = jffs2_scan_xref_node(c, jeb, (void *)node, ofs, s); + if (err) + return err; + ofs += PAD(je32_to_cpu(node->totlen)); + break; +#endif /* CONFIG_JFFS2_FS_XATTR */ + case JFFS2_NODETYPE_CLEANMARKER: D1(printk(KERN_DEBUG "CLEANMARKER node found at 0x%08x\n", ofs)); if (je32_to_cpu(node->totlen) != c->cleanmarker_size) { printk(KERN_NOTICE "CLEANMARKER node found at 0x%08x has totlen 0x%x != normal 0x%x\n", ofs, je32_to_cpu(node->totlen), c->cleanmarker_size); - DIRTY_SPACE(PAD(sizeof(struct jffs2_unknown_node))); + if ((err = jffs2_scan_dirty_space(c, jeb, PAD(sizeof(struct jffs2_unknown_node))))) + return err; ofs += PAD(sizeof(struct jffs2_unknown_node)); } else if (jeb->first_node) { printk(KERN_NOTICE "CLEANMARKER node found at 0x%08x, not first node in block (0x%08x)\n", ofs, jeb->offset); - DIRTY_SPACE(PAD(sizeof(struct jffs2_unknown_node))); + if ((err = jffs2_scan_dirty_space(c, jeb, PAD(sizeof(struct jffs2_unknown_node))))) + return err; ofs += PAD(sizeof(struct jffs2_unknown_node)); } else { - struct jffs2_raw_node_ref *marker_ref = jffs2_alloc_raw_node_ref(); - if (!marker_ref) { - printk(KERN_NOTICE "Failed to allocate node ref for clean marker\n"); - return -ENOMEM; - } - marker_ref->next_in_ino = NULL; - marker_ref->next_phys = NULL; - marker_ref->flash_offset = ofs | REF_NORMAL; - marker_ref->__totlen = c->cleanmarker_size; - jeb->first_node = jeb->last_node = marker_ref; + jffs2_link_node_ref(c, jeb, ofs | REF_NORMAL, c->cleanmarker_size, NULL); - USED_SPACE(PAD(c->cleanmarker_size)); ofs += PAD(c->cleanmarker_size); } break; @@ -645,7 +836,8 @@ scan_more: case JFFS2_NODETYPE_PADDING: if (jffs2_sum_active()) jffs2_sum_add_padding_mem(s, je32_to_cpu(node->totlen)); - DIRTY_SPACE(PAD(je32_to_cpu(node->totlen))); + if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(node->totlen))))) + return err; ofs += PAD(je32_to_cpu(node->totlen)); break; @@ -656,7 +848,8 @@ scan_more: c->flags |= JFFS2_SB_FLAG_RO; if (!(jffs2_is_readonly(c))) return -EROFS; - DIRTY_SPACE(PAD(je32_to_cpu(node->totlen))); + if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(node->totlen))))) + return err; ofs += PAD(je32_to_cpu(node->totlen)); break; @@ -666,15 +859,21 @@ scan_more: case JFFS2_FEATURE_RWCOMPAT_DELETE: D1(printk(KERN_NOTICE "Unknown but compatible feature node (0x%04x) found at offset 0x%08x\n", je16_to_cpu(node->nodetype), ofs)); - DIRTY_SPACE(PAD(je32_to_cpu(node->totlen))); + if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(node->totlen))))) + return err; ofs += PAD(je32_to_cpu(node->totlen)); break; - case JFFS2_FEATURE_RWCOMPAT_COPY: + case JFFS2_FEATURE_RWCOMPAT_COPY: { D1(printk(KERN_NOTICE "Unknown but compatible feature node (0x%04x) found at offset 0x%08x\n", je16_to_cpu(node->nodetype), ofs)); - USED_SPACE(PAD(je32_to_cpu(node->totlen))); + + jffs2_link_node_ref(c, jeb, ofs | REF_PRISTINE, PAD(je32_to_cpu(node->totlen)), NULL); + + /* We can't summarise nodes we don't grok */ + jffs2_sum_disable_collecting(s); ofs += PAD(je32_to_cpu(node->totlen)); break; + } } } } @@ -687,9 +886,9 @@ scan_more: } } - D1(printk(KERN_DEBUG "Block at 0x%08x: free 0x%08x, dirty 0x%08x, unchecked 0x%08x, used 0x%08x\n", jeb->offset, - jeb->free_size, jeb->dirty_size, jeb->unchecked_size, jeb->used_size)); - + D1(printk(KERN_DEBUG "Block at 0x%08x: free 0x%08x, dirty 0x%08x, unchecked 0x%08x, used 0x%08x, wasted 0x%08x\n", + jeb->offset,jeb->free_size, jeb->dirty_size, jeb->unchecked_size, jeb->used_size, jeb->wasted_size)); + /* mark_node_obsolete can add to wasted !! */ if (jeb->wasted_size) { jeb->dirty_size += jeb->wasted_size; @@ -730,9 +929,9 @@ struct jffs2_inode_cache *jffs2_scan_mak static int jffs2_scan_inode_node(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb, struct jffs2_raw_inode *ri, uint32_t ofs, struct jffs2_summary *s) { - struct jffs2_raw_node_ref *raw; struct jffs2_inode_cache *ic; uint32_t ino = je32_to_cpu(ri->ino); + int err; D1(printk(KERN_DEBUG "jffs2_scan_inode_node(): Node at 0x%08x\n", ofs)); @@ -745,12 +944,6 @@ static int jffs2_scan_inode_node(struct Which means that the _full_ amount of time to get to proper write mode with GC operational may actually be _longer_ than before. Sucks to be me. */ - raw = jffs2_alloc_raw_node_ref(); - if (!raw) { - printk(KERN_NOTICE "jffs2_scan_inode_node(): allocation of node reference failed\n"); - return -ENOMEM; - } - ic = jffs2_get_ino_cache(c, ino); if (!ic) { /* Inocache get failed. Either we read a bogus ino# or it's just genuinely the @@ -762,30 +955,17 @@ static int jffs2_scan_inode_node(struct printk(KERN_NOTICE "jffs2_scan_inode_node(): CRC failed on node at 0x%08x: Read 0x%08x, calculated 0x%08x\n", ofs, je32_to_cpu(ri->node_crc), crc); /* We believe totlen because the CRC on the node _header_ was OK, just the node itself failed. */ - DIRTY_SPACE(PAD(je32_to_cpu(ri->totlen))); - jffs2_free_raw_node_ref(raw); + if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(ri->totlen))))) + return err; return 0; } ic = jffs2_scan_make_ino_cache(c, ino); - if (!ic) { - jffs2_free_raw_node_ref(raw); + if (!ic) return -ENOMEM; - } } /* Wheee. It worked */ - - raw->flash_offset = ofs | REF_UNCHECKED; - raw->__totlen = PAD(je32_to_cpu(ri->totlen)); - raw->next_phys = NULL; - raw->next_in_ino = ic->nodes; - - ic->nodes = raw; - if (!jeb->first_node) - jeb->first_node = raw; - if (jeb->last_node) - jeb->last_node->next_phys = raw; - jeb->last_node = raw; + jffs2_link_node_ref(c, jeb, ofs | REF_UNCHECKED, PAD(je32_to_cpu(ri->totlen)), ic); D1(printk(KERN_DEBUG "Node is ino #%u, version %d. Range 0x%x-0x%x\n", je32_to_cpu(ri->ino), je32_to_cpu(ri->version), @@ -794,8 +974,6 @@ static int jffs2_scan_inode_node(struct pseudo_random += je32_to_cpu(ri->version); - UNCHECKED_SPACE(PAD(je32_to_cpu(ri->totlen))); - if (jffs2_sum_active()) { jffs2_sum_add_inode_mem(s, ri, ofs - jeb->offset); } @@ -806,10 +984,10 @@ static int jffs2_scan_inode_node(struct static int jffs2_scan_dirent_node(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb, struct jffs2_raw_dirent *rd, uint32_t ofs, struct jffs2_summary *s) { - struct jffs2_raw_node_ref *raw; struct jffs2_full_dirent *fd; struct jffs2_inode_cache *ic; uint32_t crc; + int err; D1(printk(KERN_DEBUG "jffs2_scan_dirent_node(): Node at 0x%08x\n", ofs)); @@ -821,7 +999,8 @@ static int jffs2_scan_dirent_node(struct printk(KERN_NOTICE "jffs2_scan_dirent_node(): Node CRC failed on node at 0x%08x: Read 0x%08x, calculated 0x%08x\n", ofs, je32_to_cpu(rd->node_crc), crc); /* We believe totlen because the CRC on the node _header_ was OK, just the node itself failed. */ - DIRTY_SPACE(PAD(je32_to_cpu(rd->totlen))); + if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(rd->totlen))))) + return err; return 0; } @@ -842,40 +1021,23 @@ static int jffs2_scan_dirent_node(struct jffs2_free_full_dirent(fd); /* FIXME: Why do we believe totlen? */ /* We believe totlen because the CRC on the node _header_ was OK, just the name failed. */ - DIRTY_SPACE(PAD(je32_to_cpu(rd->totlen))); + if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(rd->totlen))))) + return err; return 0; } - raw = jffs2_alloc_raw_node_ref(); - if (!raw) { - jffs2_free_full_dirent(fd); - printk(KERN_NOTICE "jffs2_scan_dirent_node(): allocation of node reference failed\n"); - return -ENOMEM; - } ic = jffs2_scan_make_ino_cache(c, je32_to_cpu(rd->pino)); if (!ic) { jffs2_free_full_dirent(fd); - jffs2_free_raw_node_ref(raw); return -ENOMEM; } - raw->__totlen = PAD(je32_to_cpu(rd->totlen)); - raw->flash_offset = ofs | REF_PRISTINE; - raw->next_phys = NULL; - raw->next_in_ino = ic->nodes; - ic->nodes = raw; - if (!jeb->first_node) - jeb->first_node = raw; - if (jeb->last_node) - jeb->last_node->next_phys = raw; - jeb->last_node = raw; + fd->raw = jffs2_link_node_ref(c, jeb, ofs | REF_PRISTINE, PAD(je32_to_cpu(rd->totlen)), ic); - fd->raw = raw; fd->next = NULL; fd->version = je32_to_cpu(rd->version); fd->ino = je32_to_cpu(rd->ino); fd->nhash = full_name_hash(fd->name, rd->nsize); fd->type = rd->type; - USED_SPACE(PAD(je32_to_cpu(rd->totlen))); jffs2_add_fd_to_list(c, fd, &ic->scan_dents); if (jffs2_sum_active()) { diff -puN /dev/null fs/jffs2/security.c --- /dev/null 2006-05-29 10:18:53.280907750 -0700 +++ devel-akpm/fs/jffs2/security.c 2006-05-29 15:02:34.000000000 -0700 @@ -0,0 +1,82 @@ +/* + * JFFS2 -- Journalling Flash File System, Version 2. + * + * Copyright (C) 2006 NEC Corporation + * + * Created by KaiGai Kohei + * + * For licensing information, see the file 'LICENCE' in this directory. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "nodelist.h" + +/* ---- Initial Security Label Attachment -------------- */ +int jffs2_init_security(struct inode *inode, struct inode *dir) +{ + int rc; + size_t len; + void *value; + char *name; + + rc = security_inode_init_security(inode, dir, &name, &value, &len); + if (rc) { + if (rc == -EOPNOTSUPP) + return 0; + return rc; + } + rc = do_jffs2_setxattr(inode, JFFS2_XPREFIX_SECURITY, name, value, len, 0); + + kfree(name); + kfree(value); + return rc; +} + +/* ---- XATTR Handler for "security.*" ----------------- */ +static int jffs2_security_getxattr(struct inode *inode, const char *name, + void *buffer, size_t size) +{ + if (!strcmp(name, "")) + return -EINVAL; + + return do_jffs2_getxattr(inode, JFFS2_XPREFIX_SECURITY, name, buffer, size); +} + +static int jffs2_security_setxattr(struct inode *inode, const char *name, const void *buffer, + size_t size, int flags) +{ + if (!strcmp(name, "")) + return -EINVAL; + + return do_jffs2_setxattr(inode, JFFS2_XPREFIX_SECURITY, name, buffer, size, flags); +} + +static size_t jffs2_security_listxattr(struct inode *inode, char *list, size_t list_size, + const char *name, size_t name_len) +{ + size_t retlen = XATTR_SECURITY_PREFIX_LEN + name_len + 1; + + if (list && retlen <= list_size) { + strcpy(list, XATTR_SECURITY_PREFIX); + strcpy(list + XATTR_SECURITY_PREFIX_LEN, name); + } + + return retlen; +} + +struct xattr_handler jffs2_security_xattr_handler = { + .prefix = XATTR_SECURITY_PREFIX, + .list = jffs2_security_listxattr, + .set = jffs2_security_setxattr, + .get = jffs2_security_getxattr +}; diff -puN fs/jffs2/summary.c~git-mtd fs/jffs2/summary.c --- devel/fs/jffs2/summary.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs2/summary.c 2006-05-29 15:02:34.000000000 -0700 @@ -5,6 +5,7 @@ * Zoltan Sogor , * Patrik Kluba , * University of Szeged, Hungary + * 2005 KaiGai Kohei * * For licensing information, see the file 'LICENCE' in this directory. * @@ -81,6 +82,19 @@ static int jffs2_sum_add_mem(struct jffs dbg_summary("dirent (%u) added to summary\n", je32_to_cpu(item->d.ino)); break; +#ifdef CONFIG_JFFS2_FS_XATTR + case JFFS2_NODETYPE_XATTR: + s->sum_size += JFFS2_SUMMARY_XATTR_SIZE; + s->sum_num++; + dbg_summary("xattr (xid=%u, version=%u) added to summary\n", + je32_to_cpu(item->x.xid), je32_to_cpu(item->x.version)); + break; + case JFFS2_NODETYPE_XREF: + s->sum_size += JFFS2_SUMMARY_XREF_SIZE; + s->sum_num++; + dbg_summary("xref added to summary\n"); + break; +#endif default: JFFS2_WARNING("UNKNOWN node type %u\n", je16_to_cpu(item->u.nodetype)); @@ -141,6 +155,40 @@ int jffs2_sum_add_dirent_mem(struct jffs return jffs2_sum_add_mem(s, (union jffs2_sum_mem *)temp); } +#ifdef CONFIG_JFFS2_FS_XATTR +int jffs2_sum_add_xattr_mem(struct jffs2_summary *s, struct jffs2_raw_xattr *rx, uint32_t ofs) +{ + struct jffs2_sum_xattr_mem *temp; + + temp = kmalloc(sizeof(struct jffs2_sum_xattr_mem), GFP_KERNEL); + if (!temp) + return -ENOMEM; + + temp->nodetype = rx->nodetype; + temp->xid = rx->xid; + temp->version = rx->version; + temp->offset = cpu_to_je32(ofs); + temp->totlen = rx->totlen; + temp->next = NULL; + + return jffs2_sum_add_mem(s, (union jffs2_sum_mem *)temp); +} + +int jffs2_sum_add_xref_mem(struct jffs2_summary *s, struct jffs2_raw_xref *rr, uint32_t ofs) +{ + struct jffs2_sum_xref_mem *temp; + + temp = kmalloc(sizeof(struct jffs2_sum_xref_mem), GFP_KERNEL); + if (!temp) + return -ENOMEM; + + temp->nodetype = rr->nodetype; + temp->offset = cpu_to_je32(ofs); + temp->next = NULL; + + return jffs2_sum_add_mem(s, (union jffs2_sum_mem *)temp); +} +#endif /* Cleanup every collected summary information */ static void jffs2_sum_clean_collected(struct jffs2_summary *s) @@ -259,7 +307,40 @@ int jffs2_sum_add_kvec(struct jffs2_sb_i return jffs2_sum_add_mem(c->summary, (union jffs2_sum_mem *)temp); } +#ifdef CONFIG_JFFS2_FS_XATTR + case JFFS2_NODETYPE_XATTR: { + struct jffs2_sum_xattr_mem *temp; + if (je32_to_cpu(node->x.version) == 0xffffffff) + return 0; + temp = kmalloc(sizeof(struct jffs2_sum_xattr_mem), GFP_KERNEL); + if (!temp) + goto no_mem; + + temp->nodetype = node->x.nodetype; + temp->xid = node->x.xid; + temp->version = node->x.version; + temp->totlen = node->x.totlen; + temp->offset = cpu_to_je32(ofs); + temp->next = NULL; + + return jffs2_sum_add_mem(c->summary, (union jffs2_sum_mem *)temp); + } + case JFFS2_NODETYPE_XREF: { + struct jffs2_sum_xref_mem *temp; + if (je32_to_cpu(node->r.ino) == 0xffffffff + && je32_to_cpu(node->r.xid) == 0xffffffff) + return 0; + temp = kmalloc(sizeof(struct jffs2_sum_xref_mem), GFP_KERNEL); + if (!temp) + goto no_mem; + temp->nodetype = node->r.nodetype; + temp->offset = cpu_to_je32(ofs); + temp->next = NULL; + + return jffs2_sum_add_mem(c->summary, (union jffs2_sum_mem *)temp); + } +#endif case JFFS2_NODETYPE_PADDING: dbg_summary("node PADDING\n"); c->summary->sum_padded += je32_to_cpu(node->u.totlen); @@ -288,23 +369,41 @@ no_mem: return -ENOMEM; } +static struct jffs2_raw_node_ref *sum_link_node_ref(struct jffs2_sb_info *c, + struct jffs2_eraseblock *jeb, + uint32_t ofs, uint32_t len, + struct jffs2_inode_cache *ic) +{ + /* If there was a gap, mark it dirty */ + if ((ofs & ~3) > c->sector_size - jeb->free_size) { + /* Ew. Summary doesn't actually tell us explicitly about dirty space */ + jffs2_scan_dirty_space(c, jeb, (ofs & ~3) - (c->sector_size - jeb->free_size)); + } + + return jffs2_link_node_ref(c, jeb, jeb->offset + ofs, len, ic); +} /* Process the stored summary information - helper function for jffs2_sum_scan_sumnode() */ static int jffs2_sum_process_sum_data(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb, struct jffs2_raw_summary *summary, uint32_t *pseudo_random) { - struct jffs2_raw_node_ref *raw; struct jffs2_inode_cache *ic; struct jffs2_full_dirent *fd; void *sp; int i, ino; + int err; sp = summary->sum; for (i=0; isum_num); i++) { dbg_summary("processing summary index %d\n", i); + /* Make sure there's a spare ref for dirty space */ + err = jffs2_prealloc_raw_node_refs(c, jeb, 2); + if (err) + return err; + switch (je16_to_cpu(((struct jffs2_sum_unknown_flash *)sp)->nodetype)) { case JFFS2_NODETYPE_INODE: { struct jffs2_sum_inode_flash *spi; @@ -312,38 +411,20 @@ static int jffs2_sum_process_sum_data(st ino = je32_to_cpu(spi->inode); - dbg_summary("Inode at 0x%08x\n", - jeb->offset + je32_to_cpu(spi->offset)); - - raw = jffs2_alloc_raw_node_ref(); - if (!raw) { - JFFS2_NOTICE("allocation of node reference failed\n"); - kfree(summary); - return -ENOMEM; - } + dbg_summary("Inode at 0x%08x-0x%08x\n", + jeb->offset + je32_to_cpu(spi->offset), + jeb->offset + je32_to_cpu(spi->offset) + je32_to_cpu(spi->totlen)); ic = jffs2_scan_make_ino_cache(c, ino); if (!ic) { JFFS2_NOTICE("scan_make_ino_cache failed\n"); - jffs2_free_raw_node_ref(raw); - kfree(summary); return -ENOMEM; } - raw->flash_offset = (jeb->offset + je32_to_cpu(spi->offset)) | REF_UNCHECKED; - raw->__totlen = PAD(je32_to_cpu(spi->totlen)); - raw->next_phys = NULL; - raw->next_in_ino = ic->nodes; - - ic->nodes = raw; - if (!jeb->first_node) - jeb->first_node = raw; - if (jeb->last_node) - jeb->last_node->next_phys = raw; - jeb->last_node = raw; - *pseudo_random += je32_to_cpu(spi->version); + sum_link_node_ref(c, jeb, je32_to_cpu(spi->offset) | REF_UNCHECKED, + PAD(je32_to_cpu(spi->totlen)), ic); - UNCHECKED_SPACE(PAD(je32_to_cpu(spi->totlen))); + *pseudo_random += je32_to_cpu(spi->version); sp += JFFS2_SUMMARY_INODE_SIZE; @@ -354,52 +435,33 @@ static int jffs2_sum_process_sum_data(st struct jffs2_sum_dirent_flash *spd; spd = sp; - dbg_summary("Dirent at 0x%08x\n", - jeb->offset + je32_to_cpu(spd->offset)); + dbg_summary("Dirent at 0x%08x-0x%08x\n", + jeb->offset + je32_to_cpu(spd->offset), + jeb->offset + je32_to_cpu(spd->offset) + je32_to_cpu(spd->totlen)); + fd = jffs2_alloc_full_dirent(spd->nsize+1); - if (!fd) { - kfree(summary); + if (!fd) return -ENOMEM; - } memcpy(&fd->name, spd->name, spd->nsize); fd->name[spd->nsize] = 0; - raw = jffs2_alloc_raw_node_ref(); - if (!raw) { - jffs2_free_full_dirent(fd); - JFFS2_NOTICE("allocation of node reference failed\n"); - kfree(summary); - return -ENOMEM; - } - ic = jffs2_scan_make_ino_cache(c, je32_to_cpu(spd->pino)); if (!ic) { jffs2_free_full_dirent(fd); - jffs2_free_raw_node_ref(raw); - kfree(summary); return -ENOMEM; } - raw->__totlen = PAD(je32_to_cpu(spd->totlen)); - raw->flash_offset = (jeb->offset + je32_to_cpu(spd->offset)) | REF_PRISTINE; - raw->next_phys = NULL; - raw->next_in_ino = ic->nodes; - ic->nodes = raw; - if (!jeb->first_node) - jeb->first_node = raw; - if (jeb->last_node) - jeb->last_node->next_phys = raw; - jeb->last_node = raw; + fd->raw = sum_link_node_ref(c, jeb, je32_to_cpu(spd->offset) | REF_PRISTINE, + PAD(je32_to_cpu(spd->totlen)), ic); - fd->raw = raw; fd->next = NULL; fd->version = je32_to_cpu(spd->version); fd->ino = je32_to_cpu(spd->ino); fd->nhash = full_name_hash(fd->name, spd->nsize); fd->type = spd->type; - USED_SPACE(PAD(je32_to_cpu(spd->totlen))); + jffs2_add_fd_to_list(c, fd, &ic->scan_dents); *pseudo_random += je32_to_cpu(spd->version); @@ -408,48 +470,106 @@ static int jffs2_sum_process_sum_data(st break; } +#ifdef CONFIG_JFFS2_FS_XATTR + case JFFS2_NODETYPE_XATTR: { + struct jffs2_xattr_datum *xd; + struct jffs2_sum_xattr_flash *spx; + + spx = (struct jffs2_sum_xattr_flash *)sp; + dbg_summary("xattr at %#08x-%#08x (xid=%u, version=%u)\n", + jeb->offset + je32_to_cpu(spx->offset), + jeb->offset + je32_to_cpu(spx->offset) + je32_to_cpu(spx->totlen), + je32_to_cpu(spx->xid), je32_to_cpu(spx->version)); + + xd = jffs2_setup_xattr_datum(c, je32_to_cpu(spx->xid), + je32_to_cpu(spx->version)); + if (IS_ERR(xd)) { + if (PTR_ERR(xd) == -EEXIST) { + /* a newer version of xd exists */ + if ((err = jffs2_scan_dirty_space(c, jeb, je32_to_cpu(spx->totlen)))) + return err; + sp += JFFS2_SUMMARY_XATTR_SIZE; + break; + } + JFFS2_NOTICE("allocation of xattr_datum failed\n"); + return PTR_ERR(xd); + } + + xd->node = sum_link_node_ref(c, jeb, je32_to_cpu(spx->offset) | REF_UNCHECKED, + PAD(je32_to_cpu(spx->totlen)), NULL); + /* FIXME */ xd->node->next_in_ino = (void *)xd; + + *pseudo_random += je32_to_cpu(spx->xid); + sp += JFFS2_SUMMARY_XATTR_SIZE; + + break; + } + case JFFS2_NODETYPE_XREF: { + struct jffs2_xattr_ref *ref; + struct jffs2_sum_xref_flash *spr; + + spr = (struct jffs2_sum_xref_flash *)sp; + dbg_summary("xref at %#08x-%#08x\n", + jeb->offset + je32_to_cpu(spr->offset), + jeb->offset + je32_to_cpu(spr->offset) + + (uint32_t)PAD(sizeof(struct jffs2_raw_xref))); + + ref = jffs2_alloc_xattr_ref(); + if (!ref) { + JFFS2_NOTICE("allocation of xattr_datum failed\n"); + return -ENOMEM; + } + ref->ino = 0xfffffffe; + ref->xid = 0xfffffffd; + ref->next = c->xref_temp; + c->xref_temp = ref; + + ref->node = sum_link_node_ref(c, jeb, je32_to_cpu(spr->offset) | REF_UNCHECKED, + PAD(sizeof(struct jffs2_raw_xref)), NULL); + /* FIXME */ ref->node->next_in_ino = (void *)ref; + + *pseudo_random += ref->node->flash_offset; + sp += JFFS2_SUMMARY_XREF_SIZE; + break; + } +#endif default : { - JFFS2_WARNING("Unsupported node type found in summary! Exiting..."); - kfree(summary); - return -EIO; + uint16_t nodetype = je16_to_cpu(((struct jffs2_sum_unknown_flash *)sp)->nodetype); + JFFS2_WARNING("Unsupported node type %x found in summary! Exiting...\n", nodetype); + if ((nodetype & JFFS2_COMPAT_MASK) == JFFS2_FEATURE_INCOMPAT) + return -EIO; + + /* For compatible node types, just fall back to the full scan */ + c->wasted_size -= jeb->wasted_size; + c->free_size += c->sector_size - jeb->free_size; + c->used_size -= jeb->used_size; + c->dirty_size -= jeb->dirty_size; + jeb->wasted_size = jeb->used_size = jeb->dirty_size = 0; + jeb->free_size = c->sector_size; + + jffs2_free_jeb_node_refs(c, jeb); + return -ENOTRECOVERABLE; } } } - - kfree(summary); return 0; } /* Process the summary node - called from jffs2_scan_eraseblock() */ - int jffs2_sum_scan_sumnode(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb, - uint32_t ofs, uint32_t *pseudo_random) + struct jffs2_raw_summary *summary, uint32_t sumsize, + uint32_t *pseudo_random) { struct jffs2_unknown_node crcnode; - struct jffs2_raw_node_ref *cache_ref; - struct jffs2_raw_summary *summary; - int ret, sumsize; + int ret, ofs; uint32_t crc; + int err; - sumsize = c->sector_size - ofs; - ofs += jeb->offset; + ofs = c->sector_size - sumsize; dbg_summary("summary found for 0x%08x at 0x%08x (0x%x bytes)\n", - jeb->offset, ofs, sumsize); - - summary = kmalloc(sumsize, GFP_KERNEL); - - if (!summary) { - return -ENOMEM; - } - - ret = jffs2_fill_scan_buf(c, (unsigned char *)summary, ofs, sumsize); - - if (ret) { - kfree(summary); - return ret; - } + jeb->offset, jeb->offset + ofs, sumsize); /* OK, now check for node validity and CRC */ crcnode.magic = cpu_to_je16(JFFS2_MAGIC_BITMASK); @@ -489,63 +609,42 @@ int jffs2_sum_scan_sumnode(struct jffs2_ if (je32_to_cpu(summary->cln_mkr) != c->cleanmarker_size) { dbg_summary("CLEANMARKER node has totlen 0x%x != normal 0x%x\n", je32_to_cpu(summary->cln_mkr), c->cleanmarker_size); - UNCHECKED_SPACE(PAD(je32_to_cpu(summary->cln_mkr))); + if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(summary->cln_mkr))))) + return err; } else if (jeb->first_node) { dbg_summary("CLEANMARKER node not first node in block " "(0x%08x)\n", jeb->offset); - UNCHECKED_SPACE(PAD(je32_to_cpu(summary->cln_mkr))); + if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(summary->cln_mkr))))) + return err; } else { - struct jffs2_raw_node_ref *marker_ref = jffs2_alloc_raw_node_ref(); - - if (!marker_ref) { - JFFS2_NOTICE("Failed to allocate node ref for clean marker\n"); - kfree(summary); - return -ENOMEM; - } - - marker_ref->next_in_ino = NULL; - marker_ref->next_phys = NULL; - marker_ref->flash_offset = jeb->offset | REF_NORMAL; - marker_ref->__totlen = je32_to_cpu(summary->cln_mkr); - jeb->first_node = jeb->last_node = marker_ref; - - USED_SPACE( PAD(je32_to_cpu(summary->cln_mkr)) ); + jffs2_link_node_ref(c, jeb, jeb->offset | REF_NORMAL, + je32_to_cpu(summary->cln_mkr), NULL); } } - if (je32_to_cpu(summary->padded)) { - DIRTY_SPACE(je32_to_cpu(summary->padded)); - } - ret = jffs2_sum_process_sum_data(c, jeb, summary, pseudo_random); + /* -ENOTRECOVERABLE isn't a fatal error -- it means we should do a full + scan of this eraseblock. So return zero */ + if (ret == -ENOTRECOVERABLE) + return 0; if (ret) - return ret; + return ret; /* real error */ /* for PARANOIA_CHECK */ - cache_ref = jffs2_alloc_raw_node_ref(); + ret = jffs2_prealloc_raw_node_refs(c, jeb, 2); + if (ret) + return ret; - if (!cache_ref) { - JFFS2_NOTICE("Failed to allocate node ref for cache\n"); - return -ENOMEM; - } + sum_link_node_ref(c, jeb, ofs | REF_NORMAL, sumsize, NULL); - cache_ref->next_in_ino = NULL; - cache_ref->next_phys = NULL; - cache_ref->flash_offset = ofs | REF_NORMAL; - cache_ref->__totlen = sumsize; - - if (!jeb->first_node) - jeb->first_node = cache_ref; - if (jeb->last_node) - jeb->last_node->next_phys = cache_ref; - jeb->last_node = cache_ref; - - USED_SPACE(sumsize); - - jeb->wasted_size += jeb->free_size; - c->wasted_size += jeb->free_size; - c->free_size -= jeb->free_size; - jeb->free_size = 0; + if (unlikely(jeb->free_size)) { + JFFS2_WARNING("Free size 0x%x bytes in eraseblock @0x%08x with summary?\n", + jeb->free_size, jeb->offset); + jeb->wasted_size += jeb->free_size; + c->wasted_size += jeb->free_size; + c->free_size -= jeb->free_size; + jeb->free_size = 0; + } return jffs2_scan_classify_jeb(c, jeb); @@ -564,6 +663,7 @@ static int jffs2_sum_write_data(struct j union jffs2_sum_mem *temp; struct jffs2_sum_marker *sm; struct kvec vecs[2]; + uint32_t sum_ofs; void *wpage; int ret; size_t retlen; @@ -581,16 +681,17 @@ static int jffs2_sum_write_data(struct j wpage = c->summary->sum_buf; while (c->summary->sum_num) { + temp = c->summary->sum_list_head; - switch (je16_to_cpu(c->summary->sum_list_head->u.nodetype)) { + switch (je16_to_cpu(temp->u.nodetype)) { case JFFS2_NODETYPE_INODE: { struct jffs2_sum_inode_flash *sino_ptr = wpage; - sino_ptr->nodetype = c->summary->sum_list_head->i.nodetype; - sino_ptr->inode = c->summary->sum_list_head->i.inode; - sino_ptr->version = c->summary->sum_list_head->i.version; - sino_ptr->offset = c->summary->sum_list_head->i.offset; - sino_ptr->totlen = c->summary->sum_list_head->i.totlen; + sino_ptr->nodetype = temp->i.nodetype; + sino_ptr->inode = temp->i.inode; + sino_ptr->version = temp->i.version; + sino_ptr->offset = temp->i.offset; + sino_ptr->totlen = temp->i.totlen; wpage += JFFS2_SUMMARY_INODE_SIZE; @@ -600,30 +701,60 @@ static int jffs2_sum_write_data(struct j case JFFS2_NODETYPE_DIRENT: { struct jffs2_sum_dirent_flash *sdrnt_ptr = wpage; - sdrnt_ptr->nodetype = c->summary->sum_list_head->d.nodetype; - sdrnt_ptr->totlen = c->summary->sum_list_head->d.totlen; - sdrnt_ptr->offset = c->summary->sum_list_head->d.offset; - sdrnt_ptr->pino = c->summary->sum_list_head->d.pino; - sdrnt_ptr->version = c->summary->sum_list_head->d.version; - sdrnt_ptr->ino = c->summary->sum_list_head->d.ino; - sdrnt_ptr->nsize = c->summary->sum_list_head->d.nsize; - sdrnt_ptr->type = c->summary->sum_list_head->d.type; + sdrnt_ptr->nodetype = temp->d.nodetype; + sdrnt_ptr->totlen = temp->d.totlen; + sdrnt_ptr->offset = temp->d.offset; + sdrnt_ptr->pino = temp->d.pino; + sdrnt_ptr->version = temp->d.version; + sdrnt_ptr->ino = temp->d.ino; + sdrnt_ptr->nsize = temp->d.nsize; + sdrnt_ptr->type = temp->d.type; - memcpy(sdrnt_ptr->name, c->summary->sum_list_head->d.name, - c->summary->sum_list_head->d.nsize); + memcpy(sdrnt_ptr->name, temp->d.name, + temp->d.nsize); - wpage += JFFS2_SUMMARY_DIRENT_SIZE(c->summary->sum_list_head->d.nsize); + wpage += JFFS2_SUMMARY_DIRENT_SIZE(temp->d.nsize); break; } +#ifdef CONFIG_JFFS2_FS_XATTR + case JFFS2_NODETYPE_XATTR: { + struct jffs2_sum_xattr_flash *sxattr_ptr = wpage; + + temp = c->summary->sum_list_head; + sxattr_ptr->nodetype = temp->x.nodetype; + sxattr_ptr->xid = temp->x.xid; + sxattr_ptr->version = temp->x.version; + sxattr_ptr->offset = temp->x.offset; + sxattr_ptr->totlen = temp->x.totlen; + wpage += JFFS2_SUMMARY_XATTR_SIZE; + break; + } + case JFFS2_NODETYPE_XREF: { + struct jffs2_sum_xref_flash *sxref_ptr = wpage; + + temp = c->summary->sum_list_head; + sxref_ptr->nodetype = temp->r.nodetype; + sxref_ptr->offset = temp->r.offset; + + wpage += JFFS2_SUMMARY_XREF_SIZE; + break; + } +#endif default : { - BUG(); /* unknown node in summary information */ + if ((je16_to_cpu(temp->u.nodetype) & JFFS2_COMPAT_MASK) + == JFFS2_FEATURE_RWCOMPAT_COPY) { + dbg_summary("Writing unknown RWCOMPAT_COPY node type %x\n", + je16_to_cpu(temp->u.nodetype)); + jffs2_sum_disable_collecting(c->summary); + } else { + BUG(); /* unknown node in summary information */ + } } } - temp = c->summary->sum_list_head; - c->summary->sum_list_head = c->summary->sum_list_head->u.next; + c->summary->sum_list_head = temp->u.next; kfree(temp); c->summary->sum_num--; @@ -645,25 +776,34 @@ static int jffs2_sum_write_data(struct j vecs[1].iov_base = c->summary->sum_buf; vecs[1].iov_len = datasize; - dbg_summary("JFFS2: writing out data to flash to pos : 0x%08x\n", - jeb->offset + c->sector_size - jeb->free_size); + sum_ofs = jeb->offset + c->sector_size - jeb->free_size; - spin_unlock(&c->erase_completion_lock); - ret = jffs2_flash_writev(c, vecs, 2, jeb->offset + c->sector_size - - jeb->free_size, &retlen, 0); - spin_lock(&c->erase_completion_lock); + dbg_summary("JFFS2: writing out data to flash to pos : 0x%08x\n", + sum_ofs); + ret = jffs2_flash_writev(c, vecs, 2, sum_ofs, &retlen, 0); if (ret || (retlen != infosize)) { - JFFS2_WARNING("Write of %zd bytes at 0x%08x failed. returned %d, retlen %zd\n", - infosize, jeb->offset + c->sector_size - jeb->free_size, ret, retlen); + + JFFS2_WARNING("Write of %u bytes at 0x%08x failed. returned %d, retlen %zd\n", + infosize, sum_ofs, ret, retlen); + + if (retlen) { + /* Waste remaining space */ + spin_lock(&c->erase_completion_lock); + jffs2_link_node_ref(c, jeb, sum_ofs | REF_OBSOLETE, infosize, NULL); + spin_unlock(&c->erase_completion_lock); + } c->summary->sum_size = JFFS2_SUMMARY_NOSUM_SIZE; - WASTED_SPACE(infosize); - return 1; + return 0; } + spin_lock(&c->erase_completion_lock); + jffs2_link_node_ref(c, jeb, sum_ofs | REF_NORMAL, infosize, NULL); + spin_unlock(&c->erase_completion_lock); + return 0; } @@ -671,13 +811,16 @@ static int jffs2_sum_write_data(struct j int jffs2_sum_write_sumnode(struct jffs2_sb_info *c) { - struct jffs2_raw_node_ref *summary_ref; - int datasize, infosize, padsize, ret; + int datasize, infosize, padsize; struct jffs2_eraseblock *jeb; + int ret; dbg_summary("called\n"); + spin_unlock(&c->erase_completion_lock); + jeb = c->nextblock; + jffs2_prealloc_raw_node_refs(c, jeb, 1); if (!c->summary->sum_num || !c->summary->sum_list_head) { JFFS2_WARNING("Empty summary info!!!\n"); @@ -696,35 +839,11 @@ int jffs2_sum_write_sumnode(struct jffs2 jffs2_sum_disable_collecting(c->summary); JFFS2_WARNING("Not enough space for summary, padsize = %d\n", padsize); + spin_lock(&c->erase_completion_lock); return 0; } ret = jffs2_sum_write_data(c, jeb, infosize, datasize, padsize); - if (ret) - return 0; /* can't write out summary, block is marked as NOSUM_SIZE */ - - /* for ACCT_PARANOIA_CHECK */ - spin_unlock(&c->erase_completion_lock); - summary_ref = jffs2_alloc_raw_node_ref(); spin_lock(&c->erase_completion_lock); - - if (!summary_ref) { - JFFS2_NOTICE("Failed to allocate node ref for summary\n"); - return -ENOMEM; - } - - summary_ref->next_in_ino = NULL; - summary_ref->next_phys = NULL; - summary_ref->flash_offset = (jeb->offset + c->sector_size - jeb->free_size) | REF_NORMAL; - summary_ref->__totlen = infosize; - - if (!jeb->first_node) - jeb->first_node = summary_ref; - if (jeb->last_node) - jeb->last_node->next_phys = summary_ref; - jeb->last_node = summary_ref; - - USED_SPACE(infosize); - - return 0; + return ret; } diff -puN fs/jffs2/summary.h~git-mtd fs/jffs2/summary.h --- devel/fs/jffs2/summary.h~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs2/summary.h 2006-05-29 15:02:34.000000000 -0700 @@ -18,23 +18,6 @@ #include #include -#define DIRTY_SPACE(x) do { typeof(x) _x = (x); \ - c->free_size -= _x; c->dirty_size += _x; \ - jeb->free_size -= _x ; jeb->dirty_size += _x; \ - }while(0) -#define USED_SPACE(x) do { typeof(x) _x = (x); \ - c->free_size -= _x; c->used_size += _x; \ - jeb->free_size -= _x ; jeb->used_size += _x; \ - }while(0) -#define WASTED_SPACE(x) do { typeof(x) _x = (x); \ - c->free_size -= _x; c->wasted_size += _x; \ - jeb->free_size -= _x ; jeb->wasted_size += _x; \ - }while(0) -#define UNCHECKED_SPACE(x) do { typeof(x) _x = (x); \ - c->free_size -= _x; c->unchecked_size += _x; \ - jeb->free_size -= _x ; jeb->unchecked_size += _x; \ - }while(0) - #define BLK_STATE_ALLFF 0 #define BLK_STATE_CLEAN 1 #define BLK_STATE_PARTDIRTY 2 @@ -45,6 +28,8 @@ #define JFFS2_SUMMARY_NOSUM_SIZE 0xffffffff #define JFFS2_SUMMARY_INODE_SIZE (sizeof(struct jffs2_sum_inode_flash)) #define JFFS2_SUMMARY_DIRENT_SIZE(x) (sizeof(struct jffs2_sum_dirent_flash) + (x)) +#define JFFS2_SUMMARY_XATTR_SIZE (sizeof(struct jffs2_sum_xattr_flash)) +#define JFFS2_SUMMARY_XREF_SIZE (sizeof(struct jffs2_sum_xref_flash)) /* Summary structures used on flash */ @@ -75,11 +60,28 @@ struct jffs2_sum_dirent_flash uint8_t name[0]; /* dirent name */ } __attribute__((packed)); +struct jffs2_sum_xattr_flash +{ + jint16_t nodetype; /* == JFFS2_NODETYPE_XATR */ + jint32_t xid; /* xattr identifier */ + jint32_t version; /* version number */ + jint32_t offset; /* offset on jeb */ + jint32_t totlen; /* node length */ +} __attribute__((packed)); + +struct jffs2_sum_xref_flash +{ + jint16_t nodetype; /* == JFFS2_NODETYPE_XREF */ + jint32_t offset; /* offset on jeb */ +} __attribute__((packed)); + union jffs2_sum_flash { struct jffs2_sum_unknown_flash u; struct jffs2_sum_inode_flash i; struct jffs2_sum_dirent_flash d; + struct jffs2_sum_xattr_flash x; + struct jffs2_sum_xref_flash r; }; /* Summary structures used in the memory */ @@ -114,11 +116,30 @@ struct jffs2_sum_dirent_mem uint8_t name[0]; /* dirent name */ } __attribute__((packed)); +struct jffs2_sum_xattr_mem +{ + union jffs2_sum_mem *next; + jint16_t nodetype; + jint32_t xid; + jint32_t version; + jint32_t offset; + jint32_t totlen; +} __attribute__((packed)); + +struct jffs2_sum_xref_mem +{ + union jffs2_sum_mem *next; + jint16_t nodetype; + jint32_t offset; +} __attribute__((packed)); + union jffs2_sum_mem { struct jffs2_sum_unknown_mem u; struct jffs2_sum_inode_mem i; struct jffs2_sum_dirent_mem d; + struct jffs2_sum_xattr_mem x; + struct jffs2_sum_xref_mem r; }; /* Summary related information stored in superblock */ @@ -159,8 +180,11 @@ int jffs2_sum_write_sumnode(struct jffs2 int jffs2_sum_add_padding_mem(struct jffs2_summary *s, uint32_t size); int jffs2_sum_add_inode_mem(struct jffs2_summary *s, struct jffs2_raw_inode *ri, uint32_t ofs); int jffs2_sum_add_dirent_mem(struct jffs2_summary *s, struct jffs2_raw_dirent *rd, uint32_t ofs); +int jffs2_sum_add_xattr_mem(struct jffs2_summary *s, struct jffs2_raw_xattr *rx, uint32_t ofs); +int jffs2_sum_add_xref_mem(struct jffs2_summary *s, struct jffs2_raw_xref *rr, uint32_t ofs); int jffs2_sum_scan_sumnode(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb, - uint32_t ofs, uint32_t *pseudo_random); + struct jffs2_raw_summary *summary, uint32_t sumlen, + uint32_t *pseudo_random); #else /* SUMMARY DISABLED */ @@ -176,7 +200,9 @@ int jffs2_sum_scan_sumnode(struct jffs2_ #define jffs2_sum_add_padding_mem(a,b) #define jffs2_sum_add_inode_mem(a,b,c) #define jffs2_sum_add_dirent_mem(a,b,c) -#define jffs2_sum_scan_sumnode(a,b,c,d) (0) +#define jffs2_sum_add_xattr_mem(a,b,c) +#define jffs2_sum_add_xref_mem(a,b,c) +#define jffs2_sum_scan_sumnode(a,b,c,d,e) (0) #endif /* CONFIG_JFFS2_SUMMARY */ diff -puN fs/jffs2/super.c~git-mtd fs/jffs2/super.c --- devel/fs/jffs2/super.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs2/super.c 2006-05-29 15:02:34.000000000 -0700 @@ -151,7 +151,10 @@ static struct super_block *jffs2_get_sb_ sb->s_op = &jffs2_super_operations; sb->s_flags = flags | MS_NOATIME; - + sb->s_xattr = jffs2_xattr_handlers; +#ifdef CONFIG_JFFS2_FS_POSIX_ACL + sb->s_flags |= MS_POSIXACL; +#endif ret = jffs2_do_fill_super(sb, data, flags & MS_SILENT ? 1 : 0); if (ret) { @@ -293,6 +296,7 @@ static void jffs2_put_super (struct supe kfree(c->blocks); jffs2_flash_cleanup(c); kfree(c->inocache_list); + jffs2_clear_xattr_subsystem(c); if (c->mtd->sync) c->mtd->sync(c->mtd); @@ -320,6 +324,18 @@ static int __init init_jffs2_fs(void) { int ret; + /* Paranoia checks for on-medium structures. If we ask GCC + to pack them with __attribute__((packed)) then it _also_ + assumes that they're not aligned -- so it emits crappy + code on some architectures. Ideally we want an attribute + which means just 'no padding', without the alignment + thing. But GCC doesn't have that -- we have to just + hope the structs are the right sizes, instead. */ + BUG_ON(sizeof(struct jffs2_unknown_node) != 12); + BUG_ON(sizeof(struct jffs2_raw_dirent) != 40); + BUG_ON(sizeof(struct jffs2_raw_inode) != 68); + BUG_ON(sizeof(struct jffs2_raw_summary) != 32); + printk(KERN_INFO "JFFS2 version 2.2." #ifdef CONFIG_JFFS2_FS_WRITEBUFFER " (NAND)" @@ -327,7 +343,7 @@ static int __init init_jffs2_fs(void) #ifdef CONFIG_JFFS2_SUMMARY " (SUMMARY) " #endif - " (C) 2001-2003 Red Hat, Inc.\n"); + " (C) 2001-2006 Red Hat, Inc.\n"); jffs2_inode_cachep = kmem_cache_create("jffs2_i", sizeof(struct jffs2_inode_info), diff -puN fs/jffs2/symlink.c~git-mtd fs/jffs2/symlink.c --- devel/fs/jffs2/symlink.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs2/symlink.c 2006-05-29 15:02:34.000000000 -0700 @@ -24,7 +24,12 @@ struct inode_operations jffs2_symlink_in { .readlink = generic_readlink, .follow_link = jffs2_follow_link, - .setattr = jffs2_setattr + .permission = jffs2_permission, + .setattr = jffs2_setattr, + .setxattr = jffs2_setxattr, + .getxattr = jffs2_getxattr, + .listxattr = jffs2_listxattr, + .removexattr = jffs2_removexattr }; static void *jffs2_follow_link(struct dentry *dentry, struct nameidata *nd) diff -puN fs/jffs2/wbuf.c~git-mtd fs/jffs2/wbuf.c --- devel/fs/jffs2/wbuf.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs2/wbuf.c 2006-05-29 15:02:34.000000000 -0700 @@ -156,69 +156,130 @@ static void jffs2_block_refile(struct jf jffs2_erase_pending_trigger(c); } - /* Adjust its size counts accordingly */ - c->wasted_size += jeb->free_size; - c->free_size -= jeb->free_size; - jeb->wasted_size += jeb->free_size; - jeb->free_size = 0; + if (!jffs2_prealloc_raw_node_refs(c, jeb, 1)) { + uint32_t oldfree = jeb->free_size; + + jffs2_link_node_ref(c, jeb, + (jeb->offset+c->sector_size-oldfree) | REF_OBSOLETE, + oldfree, NULL); + /* convert to wasted */ + c->wasted_size += oldfree; + jeb->wasted_size += oldfree; + c->dirty_size -= oldfree; + jeb->dirty_size -= oldfree; + } jffs2_dbg_dump_block_lists_nolock(c); jffs2_dbg_acct_sanity_check_nolock(c,jeb); jffs2_dbg_acct_paranoia_check_nolock(c, jeb); } +static struct jffs2_raw_node_ref **jffs2_incore_replace_raw(struct jffs2_sb_info *c, + struct jffs2_inode_info *f, + struct jffs2_raw_node_ref *raw, + union jffs2_node_union *node) +{ + struct jffs2_node_frag *frag; + struct jffs2_full_dirent *fd; + + dbg_noderef("incore_replace_raw: node at %p is {%04x,%04x}\n", + node, je16_to_cpu(node->u.magic), je16_to_cpu(node->u.nodetype)); + + BUG_ON(je16_to_cpu(node->u.magic) != 0x1985 && + je16_to_cpu(node->u.magic) != 0); + + switch (je16_to_cpu(node->u.nodetype)) { + case JFFS2_NODETYPE_INODE: + if (f->metadata && f->metadata->raw == raw) { + dbg_noderef("Will replace ->raw in f->metadata at %p\n", f->metadata); + return &f->metadata->raw; + } + frag = jffs2_lookup_node_frag(&f->fragtree, je32_to_cpu(node->i.offset)); + BUG_ON(!frag); + /* Find a frag which refers to the full_dnode we want to modify */ + while (!frag->node || frag->node->raw != raw) { + frag = frag_next(frag); + BUG_ON(!frag); + } + dbg_noderef("Will replace ->raw in full_dnode at %p\n", frag->node); + return &frag->node->raw; + + case JFFS2_NODETYPE_DIRENT: + for (fd = f->dents; fd; fd = fd->next) { + if (fd->raw == raw) { + dbg_noderef("Will replace ->raw in full_dirent at %p\n", fd); + return &fd->raw; + } + } + BUG(); + + default: + dbg_noderef("Don't care about replacing raw for nodetype %x\n", + je16_to_cpu(node->u.nodetype)); + break; + } + return NULL; +} + /* Recover from failure to write wbuf. Recover the nodes up to the * wbuf, not the one which we were starting to try to write. */ static void jffs2_wbuf_recover(struct jffs2_sb_info *c) { struct jffs2_eraseblock *jeb, *new_jeb; - struct jffs2_raw_node_ref **first_raw, **raw; + struct jffs2_raw_node_ref *raw, *next, *first_raw = NULL; size_t retlen; int ret; + int nr_refile = 0; unsigned char *buf; uint32_t start, end, ofs, len; - spin_lock(&c->erase_completion_lock); - jeb = &c->blocks[c->wbuf_ofs / c->sector_size]; + spin_lock(&c->erase_completion_lock); jffs2_block_refile(c, jeb, REFILE_NOTEMPTY); + spin_unlock(&c->erase_completion_lock); + + BUG_ON(!ref_obsolete(jeb->last_node)); /* Find the first node to be recovered, by skipping over every node which ends before the wbuf starts, or which is obsolete. */ - first_raw = &jeb->first_node; - while (*first_raw && - (ref_obsolete(*first_raw) || - (ref_offset(*first_raw)+ref_totlen(c, jeb, *first_raw)) < c->wbuf_ofs)) { - D1(printk(KERN_DEBUG "Skipping node at 0x%08x(%d)-0x%08x which is either before 0x%08x or obsolete\n", - ref_offset(*first_raw), ref_flags(*first_raw), - (ref_offset(*first_raw) + ref_totlen(c, jeb, *first_raw)), - c->wbuf_ofs)); - first_raw = &(*first_raw)->next_phys; + for (next = raw = jeb->first_node; next; raw = next) { + next = ref_next(raw); + + if (ref_obsolete(raw) || + (next && ref_offset(next) <= c->wbuf_ofs)) { + dbg_noderef("Skipping node at 0x%08x(%d)-0x%08x which is either before 0x%08x or obsolete\n", + ref_offset(raw), ref_flags(raw), + (ref_offset(raw) + ref_totlen(c, jeb, raw)), + c->wbuf_ofs); + continue; + } + dbg_noderef("First node to be recovered is at 0x%08x(%d)-0x%08x\n", + ref_offset(raw), ref_flags(raw), + (ref_offset(raw) + ref_totlen(c, jeb, raw))); + + first_raw = raw; + break; } - if (!*first_raw) { + if (!first_raw) { /* All nodes were obsolete. Nothing to recover. */ D1(printk(KERN_DEBUG "No non-obsolete nodes to be recovered. Just filing block bad\n")); - spin_unlock(&c->erase_completion_lock); + c->wbuf_len = 0; return; } - start = ref_offset(*first_raw); - end = ref_offset(*first_raw) + ref_totlen(c, jeb, *first_raw); - - /* Find the last node to be recovered */ - raw = first_raw; - while ((*raw)) { - if (!ref_obsolete(*raw)) - end = ref_offset(*raw) + ref_totlen(c, jeb, *raw); - - raw = &(*raw)->next_phys; - } - spin_unlock(&c->erase_completion_lock); + start = ref_offset(first_raw); + end = ref_offset(jeb->last_node); + nr_refile = 1; + + /* Count the number of refs which need to be copied */ + while ((raw = ref_next(raw)) != jeb->last_node) + nr_refile++; - D1(printk(KERN_DEBUG "wbuf recover %08x-%08x\n", start, end)); + dbg_noderef("wbuf recover %08x-%08x (%d bytes in %d nodes)\n", + start, end, end - start, nr_refile); buf = NULL; if (start < c->wbuf_ofs) { @@ -233,28 +294,37 @@ static void jffs2_wbuf_recover(struct jf } /* Do the read... */ - if (jffs2_cleanmarker_oob(c)) - ret = c->mtd->read_ecc(c->mtd, start, c->wbuf_ofs - start, &retlen, buf, NULL, c->oobinfo); - else - ret = c->mtd->read(c->mtd, start, c->wbuf_ofs - start, &retlen, buf); + ret = c->mtd->read(c->mtd, start, c->wbuf_ofs - start, &retlen, buf); - if (ret == -EBADMSG && retlen == c->wbuf_ofs - start) { - /* ECC recovered */ + /* ECC recovered ? */ + if ((ret == -EUCLEAN || ret == -EBADMSG) && + (retlen == c->wbuf_ofs - start)) ret = 0; - } + if (ret || retlen != c->wbuf_ofs - start) { printk(KERN_CRIT "Old data are already lost in wbuf recovery. Data loss ensues.\n"); kfree(buf); buf = NULL; read_failed: - first_raw = &(*first_raw)->next_phys; + first_raw = ref_next(first_raw); + nr_refile--; + while (first_raw && ref_obsolete(first_raw)) { + first_raw = ref_next(first_raw); + nr_refile--; + } + /* If this was the only node to be recovered, give up */ - if (!(*first_raw)) + if (!first_raw) { + c->wbuf_len = 0; return; + } /* It wasn't. Go on and try to recover nodes complete in the wbuf */ - start = ref_offset(*first_raw); + start = ref_offset(first_raw); + dbg_noderef("wbuf now recover %08x-%08x (%d bytes in %d nodes)\n", + start, end, end - start, nr_refile); + } else { /* Read succeeded. Copy the remaining data from the wbuf */ memcpy(buf + (c->wbuf_ofs - start), c->wbuf, end - c->wbuf_ofs); @@ -263,14 +333,23 @@ static void jffs2_wbuf_recover(struct jf /* OK... we're to rewrite (end-start) bytes of data from first_raw onwards. Either 'buf' contains the data, or we find it in the wbuf */ - /* ... and get an allocation of space from a shiny new block instead */ - ret = jffs2_reserve_space_gc(c, end-start, &ofs, &len, JFFS2_SUMMARY_NOSUM_SIZE); + ret = jffs2_reserve_space_gc(c, end-start, &len, JFFS2_SUMMARY_NOSUM_SIZE); if (ret) { printk(KERN_WARNING "Failed to allocate space for wbuf recovery. Data loss ensues.\n"); kfree(buf); return; } + + ret = jffs2_prealloc_raw_node_refs(c, c->nextblock, nr_refile); + if (ret) { + printk(KERN_WARNING "Failed to allocate node refs for wbuf recovery. Data loss ensues.\n"); + kfree(buf); + return; + } + + ofs = write_ofs(c); + if (end-start >= c->wbuf_pagesize) { /* Need to do another write immediately, but it's possible that this is just because the wbuf itself is completely @@ -288,36 +367,22 @@ static void jffs2_wbuf_recover(struct jf if (breakme++ == 20) { printk(KERN_NOTICE "Faking write error at 0x%08x\n", ofs); breakme = 0; - c->mtd->write_ecc(c->mtd, ofs, towrite, &retlen, - brokenbuf, NULL, c->oobinfo); + c->mtd->write(c->mtd, ofs, towrite, &retlen, + brokenbuf); ret = -EIO; } else #endif - if (jffs2_cleanmarker_oob(c)) - ret = c->mtd->write_ecc(c->mtd, ofs, towrite, &retlen, - rewrite_buf, NULL, c->oobinfo); - else - ret = c->mtd->write(c->mtd, ofs, towrite, &retlen, rewrite_buf); + ret = c->mtd->write(c->mtd, ofs, towrite, &retlen, + rewrite_buf); if (ret || retlen != towrite) { /* Argh. We tried. Really we did. */ printk(KERN_CRIT "Recovery of wbuf failed due to a second write error\n"); kfree(buf); - if (retlen) { - struct jffs2_raw_node_ref *raw2; - - raw2 = jffs2_alloc_raw_node_ref(); - if (!raw2) - return; - - raw2->flash_offset = ofs | REF_OBSOLETE; - raw2->__totlen = ref_totlen(c, jeb, *first_raw); - raw2->next_phys = NULL; - raw2->next_in_ino = NULL; + if (retlen) + jffs2_add_physical_node_ref(c, ofs | REF_OBSOLETE, ref_totlen(c, jeb, first_raw), NULL); - jffs2_add_physical_node_ref(c, raw2); - } return; } printk(KERN_NOTICE "Recovery of wbuf succeeded to %08x\n", ofs); @@ -326,12 +391,10 @@ static void jffs2_wbuf_recover(struct jf c->wbuf_ofs = ofs + towrite; memmove(c->wbuf, rewrite_buf + towrite, c->wbuf_len); /* Don't muck about with c->wbuf_inodes. False positives are harmless. */ - kfree(buf); } else { /* OK, now we're left with the dregs in whichever buffer we're using */ if (buf) { memcpy(c->wbuf, buf, end-start); - kfree(buf); } else { memmove(c->wbuf, c->wbuf + (start - c->wbuf_ofs), end - start); } @@ -343,62 +406,111 @@ static void jffs2_wbuf_recover(struct jf new_jeb = &c->blocks[ofs / c->sector_size]; spin_lock(&c->erase_completion_lock); - if (new_jeb->first_node) { - /* Odd, but possible with ST flash later maybe */ - new_jeb->last_node->next_phys = *first_raw; - } else { - new_jeb->first_node = *first_raw; - } - - raw = first_raw; - while (*raw) { - uint32_t rawlen = ref_totlen(c, jeb, *raw); + for (raw = first_raw; raw != jeb->last_node; raw = ref_next(raw)) { + uint32_t rawlen = ref_totlen(c, jeb, raw); + struct jffs2_inode_cache *ic; + struct jffs2_raw_node_ref *new_ref; + struct jffs2_raw_node_ref **adjust_ref = NULL; + struct jffs2_inode_info *f = NULL; D1(printk(KERN_DEBUG "Refiling block of %08x at %08x(%d) to %08x\n", - rawlen, ref_offset(*raw), ref_flags(*raw), ofs)); + rawlen, ref_offset(raw), ref_flags(raw), ofs)); - if (ref_obsolete(*raw)) { - /* Shouldn't really happen much */ - new_jeb->dirty_size += rawlen; - new_jeb->free_size -= rawlen; - c->dirty_size += rawlen; - } else { - new_jeb->used_size += rawlen; - new_jeb->free_size -= rawlen; + ic = jffs2_raw_ref_to_ic(raw); + + /* Ick. This XATTR mess should be fixed shortly... */ + if (ic && ic->class == RAWNODE_CLASS_XATTR_DATUM) { + struct jffs2_xattr_datum *xd = (void *)ic; + BUG_ON(xd->node != raw); + adjust_ref = &xd->node; + raw->next_in_ino = NULL; + ic = NULL; + } else if (ic && ic->class == RAWNODE_CLASS_XATTR_REF) { + struct jffs2_xattr_datum *xr = (void *)ic; + BUG_ON(xr->node != raw); + adjust_ref = &xr->node; + raw->next_in_ino = NULL; + ic = NULL; + } else if (ic && ic->class == RAWNODE_CLASS_INODE_CACHE) { + struct jffs2_raw_node_ref **p = &ic->nodes; + + /* Remove the old node from the per-inode list */ + while (*p && *p != (void *)ic) { + if (*p == raw) { + (*p) = (raw->next_in_ino); + raw->next_in_ino = NULL; + break; + } + p = &((*p)->next_in_ino); + } + + if (ic->state == INO_STATE_PRESENT && !ref_obsolete(raw)) { + /* If it's an in-core inode, then we have to adjust any + full_dirent or full_dnode structure to point to the + new version instead of the old */ + f = jffs2_gc_fetch_inode(c, ic->ino, ic->nlink); + if (IS_ERR(f)) { + /* Should never happen; it _must_ be present */ + JFFS2_ERROR("Failed to iget() ino #%u, err %ld\n", + ic->ino, PTR_ERR(f)); + BUG(); + } + /* We don't lock f->sem. There's a number of ways we could + end up in here with it already being locked, and nobody's + going to modify it on us anyway because we hold the + alloc_sem. We're only changing one ->raw pointer too, + which we can get away with without upsetting readers. */ + adjust_ref = jffs2_incore_replace_raw(c, f, raw, + (void *)(buf?:c->wbuf) + (ref_offset(raw) - start)); + } else if (unlikely(ic->state != INO_STATE_PRESENT && + ic->state != INO_STATE_CHECKEDABSENT && + ic->state != INO_STATE_GC)) { + JFFS2_ERROR("Inode #%u is in strange state %d!\n", ic->ino, ic->state); + BUG(); + } + } + + new_ref = jffs2_link_node_ref(c, new_jeb, ofs | ref_flags(raw), rawlen, ic); + + if (adjust_ref) { + BUG_ON(*adjust_ref != raw); + *adjust_ref = new_ref; + } + if (f) + jffs2_gc_release_inode(c, f); + + if (!ref_obsolete(raw)) { jeb->dirty_size += rawlen; jeb->used_size -= rawlen; c->dirty_size += rawlen; + c->used_size -= rawlen; + raw->flash_offset = ref_offset(raw) | REF_OBSOLETE; + BUG_ON(raw->next_in_ino); } - c->free_size -= rawlen; - (*raw)->flash_offset = ofs | ref_flags(*raw); ofs += rawlen; - new_jeb->last_node = *raw; - - raw = &(*raw)->next_phys; } + kfree(buf); + /* Fix up the original jeb now it's on the bad_list */ - *first_raw = NULL; - if (first_raw == &jeb->first_node) { - jeb->last_node = NULL; + if (first_raw == jeb->first_node) { D1(printk(KERN_DEBUG "Failing block at %08x is now empty. Moving to erase_pending_list\n", jeb->offset)); list_del(&jeb->list); list_add(&jeb->list, &c->erase_pending_list); c->nr_erasing_blocks++; jffs2_erase_pending_trigger(c); } - else - jeb->last_node = container_of(first_raw, struct jffs2_raw_node_ref, next_phys); jffs2_dbg_acct_sanity_check_nolock(c, jeb); - jffs2_dbg_acct_paranoia_check_nolock(c, jeb); + jffs2_dbg_acct_paranoia_check_nolock(c, jeb); jffs2_dbg_acct_sanity_check_nolock(c, new_jeb); - jffs2_dbg_acct_paranoia_check_nolock(c, new_jeb); + jffs2_dbg_acct_paranoia_check_nolock(c, new_jeb); spin_unlock(&c->erase_completion_lock); - D1(printk(KERN_DEBUG "wbuf recovery completed OK\n")); + D1(printk(KERN_DEBUG "wbuf recovery completed OK. wbuf_ofs 0x%08x, len 0x%x\n", c->wbuf_ofs, c->wbuf_len)); + } /* Meaning of pad argument: @@ -412,6 +524,7 @@ static void jffs2_wbuf_recover(struct jf static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad) { + struct jffs2_eraseblock *wbuf_jeb; int ret; size_t retlen; @@ -429,6 +542,10 @@ static int __jffs2_flush_wbuf(struct jff if (!c->wbuf_len) /* already checked c->wbuf above */ return 0; + wbuf_jeb = &c->blocks[c->wbuf_ofs / c->sector_size]; + if (jffs2_prealloc_raw_node_refs(c, wbuf_jeb, c->nextblock->allocated_refs + 1)) + return -ENOMEM; + /* claim remaining space on the page this happens, if we have a change to a new block, or if fsync forces us to flush the writebuffer. @@ -458,15 +575,12 @@ static int __jffs2_flush_wbuf(struct jff if (breakme++ == 20) { printk(KERN_NOTICE "Faking write error at 0x%08x\n", c->wbuf_ofs); breakme = 0; - c->mtd->write_ecc(c->mtd, c->wbuf_ofs, c->wbuf_pagesize, - &retlen, brokenbuf, NULL, c->oobinfo); + c->mtd->write(c->mtd, c->wbuf_ofs, c->wbuf_pagesize, &retlen, + brokenbuf); ret = -EIO; } else #endif - if (jffs2_cleanmarker_oob(c)) - ret = c->mtd->write_ecc(c->mtd, c->wbuf_ofs, c->wbuf_pagesize, &retlen, c->wbuf, NULL, c->oobinfo); - else ret = c->mtd->write(c->mtd, c->wbuf_ofs, c->wbuf_pagesize, &retlen, c->wbuf); if (ret || retlen != c->wbuf_pagesize) { @@ -483,32 +597,34 @@ static int __jffs2_flush_wbuf(struct jff return ret; } - spin_lock(&c->erase_completion_lock); - /* Adjust free size of the block if we padded. */ if (pad) { - struct jffs2_eraseblock *jeb; - - jeb = &c->blocks[c->wbuf_ofs / c->sector_size]; + uint32_t waste = c->wbuf_pagesize - c->wbuf_len; D1(printk(KERN_DEBUG "jffs2_flush_wbuf() adjusting free_size of %sblock at %08x\n", - (jeb==c->nextblock)?"next":"", jeb->offset)); + (wbuf_jeb==c->nextblock)?"next":"", wbuf_jeb->offset)); /* wbuf_pagesize - wbuf_len is the amount of space that's to be padded. If there is less free space in the block than that, something screwed up */ - if (jeb->free_size < (c->wbuf_pagesize - c->wbuf_len)) { + if (wbuf_jeb->free_size < waste) { printk(KERN_CRIT "jffs2_flush_wbuf(): Accounting error. wbuf at 0x%08x has 0x%03x bytes, 0x%03x left.\n", - c->wbuf_ofs, c->wbuf_len, c->wbuf_pagesize-c->wbuf_len); + c->wbuf_ofs, c->wbuf_len, waste); printk(KERN_CRIT "jffs2_flush_wbuf(): But free_size for block at 0x%08x is only 0x%08x\n", - jeb->offset, jeb->free_size); + wbuf_jeb->offset, wbuf_jeb->free_size); BUG(); } - jeb->free_size -= (c->wbuf_pagesize - c->wbuf_len); - c->free_size -= (c->wbuf_pagesize - c->wbuf_len); - jeb->wasted_size += (c->wbuf_pagesize - c->wbuf_len); - c->wasted_size += (c->wbuf_pagesize - c->wbuf_len); - } + + spin_lock(&c->erase_completion_lock); + + jffs2_link_node_ref(c, wbuf_jeb, (c->wbuf_ofs + c->wbuf_len) | REF_OBSOLETE, waste, NULL); + /* FIXME: that made it count as dirty. Convert to wasted */ + wbuf_jeb->dirty_size -= waste; + c->dirty_size -= waste; + wbuf_jeb->wasted_size += waste; + c->wasted_size += waste; + } else + spin_lock(&c->erase_completion_lock); /* Stick any now-obsoleted blocks on the erase_pending_list */ jffs2_refile_wbuf_blocks(c); @@ -603,20 +719,30 @@ int jffs2_flush_wbuf_pad(struct jffs2_sb return ret; } -int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *invecs, unsigned long count, loff_t to, size_t *retlen, uint32_t ino) + +static size_t jffs2_fill_wbuf(struct jffs2_sb_info *c, const uint8_t *buf, + size_t len) { - struct kvec outvecs[3]; - uint32_t totlen = 0; - uint32_t split_ofs = 0; - uint32_t old_totlen; - int ret, splitvec = -1; - int invec, outvec; - size_t wbuf_retlen; - unsigned char *wbuf_ptr; - size_t donelen = 0; + if (len && !c->wbuf_len && (len >= c->wbuf_pagesize)) + return 0; + + if (len > (c->wbuf_pagesize - c->wbuf_len)) + len = c->wbuf_pagesize - c->wbuf_len; + memcpy(c->wbuf + c->wbuf_len, buf, len); + c->wbuf_len += (uint32_t) len; + return len; +} + +int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *invecs, + unsigned long count, loff_t to, size_t *retlen, + uint32_t ino) +{ + struct jffs2_eraseblock *jeb; + size_t wbuf_retlen, donelen = 0; uint32_t outvec_to = to; + int ret, invec; - /* If not NAND flash, don't bother */ + /* If not writebuffered flash, don't bother */ if (!jffs2_is_writebuffered(c)) return jffs2_flash_direct_writev(c, invecs, count, to, retlen); @@ -629,34 +755,22 @@ int jffs2_flash_writev(struct jffs2_sb_i memset(c->wbuf,0xff,c->wbuf_pagesize); } - /* Fixup the wbuf if we are moving to a new eraseblock. The checks below - fail for ECC'd NOR because cleanmarker == 16, so a block starts at - xxx0010. */ - if (jffs2_nor_ecc(c)) { - if (((c->wbuf_ofs % c->sector_size) == 0) && !c->wbuf_len) { - c->wbuf_ofs = PAGE_DIV(to); - c->wbuf_len = PAGE_MOD(to); - memset(c->wbuf,0xff,c->wbuf_pagesize); - } - } - - /* Sanity checks on target address. - It's permitted to write at PAD(c->wbuf_len+c->wbuf_ofs), - and it's permitted to write at the beginning of a new - erase block. Anything else, and you die. - New block starts at xxx000c (0-b = block header) - */ + /* + * Sanity checks on target address. It's permitted to write + * at PAD(c->wbuf_len+c->wbuf_ofs), and it's permitted to + * write at the beginning of a new erase block. Anything else, + * and you die. New block starts at xxx000c (0-b = block + * header) + */ if (SECTOR_ADDR(to) != SECTOR_ADDR(c->wbuf_ofs)) { /* It's a write to a new block */ if (c->wbuf_len) { - D1(printk(KERN_DEBUG "jffs2_flash_writev() to 0x%lx causes flush of wbuf at 0x%08x\n", (unsigned long)to, c->wbuf_ofs)); + D1(printk(KERN_DEBUG "jffs2_flash_writev() to 0x%lx " + "causes flush of wbuf at 0x%08x\n", + (unsigned long)to, c->wbuf_ofs)); ret = __jffs2_flush_wbuf(c, PAD_NOACCOUNT); - if (ret) { - /* the underlying layer has to check wbuf_len to do the cleanup */ - D1(printk(KERN_WARNING "jffs2_flush_wbuf() called from jffs2_flash_writev() failed %d\n", ret)); - *retlen = 0; - goto exit; - } + if (ret) + goto outerr; } /* set pointer to new block */ c->wbuf_ofs = PAGE_DIV(to); @@ -665,165 +779,70 @@ int jffs2_flash_writev(struct jffs2_sb_i if (to != PAD(c->wbuf_ofs + c->wbuf_len)) { /* We're not writing immediately after the writebuffer. Bad. */ - printk(KERN_CRIT "jffs2_flash_writev(): Non-contiguous write to %08lx\n", (unsigned long)to); + printk(KERN_CRIT "jffs2_flash_writev(): Non-contiguous write " + "to %08lx\n", (unsigned long)to); if (c->wbuf_len) printk(KERN_CRIT "wbuf was previously %08x-%08x\n", - c->wbuf_ofs, c->wbuf_ofs+c->wbuf_len); - BUG(); - } - - /* Note outvecs[3] above. We know count is never greater than 2 */ - if (count > 2) { - printk(KERN_CRIT "jffs2_flash_writev(): count is %ld\n", count); + c->wbuf_ofs, c->wbuf_ofs+c->wbuf_len); BUG(); } - invec = 0; - outvec = 0; - - /* Fill writebuffer first, if already in use */ - if (c->wbuf_len) { - uint32_t invec_ofs = 0; - - /* adjust alignment offset */ - if (c->wbuf_len != PAGE_MOD(to)) { - c->wbuf_len = PAGE_MOD(to); - /* take care of alignment to next page */ - if (!c->wbuf_len) - c->wbuf_len = c->wbuf_pagesize; - } - - while(c->wbuf_len < c->wbuf_pagesize) { - uint32_t thislen; - - if (invec == count) - goto alldone; - - thislen = c->wbuf_pagesize - c->wbuf_len; - - if (thislen >= invecs[invec].iov_len) - thislen = invecs[invec].iov_len; - - invec_ofs = thislen; - - memcpy(c->wbuf + c->wbuf_len, invecs[invec].iov_base, thislen); - c->wbuf_len += thislen; - donelen += thislen; - /* Get next invec, if actual did not fill the buffer */ - if (c->wbuf_len < c->wbuf_pagesize) - invec++; - } - - /* write buffer is full, flush buffer */ - ret = __jffs2_flush_wbuf(c, NOPAD); - if (ret) { - /* the underlying layer has to check wbuf_len to do the cleanup */ - D1(printk(KERN_WARNING "jffs2_flush_wbuf() called from jffs2_flash_writev() failed %d\n", ret)); - /* Retlen zero to make sure our caller doesn't mark the space dirty. - We've already done everything that's necessary */ - *retlen = 0; - goto exit; - } - outvec_to += donelen; - c->wbuf_ofs = outvec_to; - - /* All invecs done ? */ - if (invec == count) - goto alldone; - - /* Set up the first outvec, containing the remainder of the - invec we partially used */ - if (invecs[invec].iov_len > invec_ofs) { - outvecs[0].iov_base = invecs[invec].iov_base+invec_ofs; - totlen = outvecs[0].iov_len = invecs[invec].iov_len-invec_ofs; - if (totlen > c->wbuf_pagesize) { - splitvec = outvec; - split_ofs = outvecs[0].iov_len - PAGE_MOD(totlen); - } - outvec++; - } - invec++; - } - - /* OK, now we've flushed the wbuf and the start of the bits - we have been asked to write, now to write the rest.... */ - - /* totlen holds the amount of data still to be written */ - old_totlen = totlen; - for ( ; invec < count; invec++,outvec++ ) { - outvecs[outvec].iov_base = invecs[invec].iov_base; - totlen += outvecs[outvec].iov_len = invecs[invec].iov_len; - if (PAGE_DIV(totlen) != PAGE_DIV(old_totlen)) { - splitvec = outvec; - split_ofs = outvecs[outvec].iov_len - PAGE_MOD(totlen); - old_totlen = totlen; + /* adjust alignment offset */ + if (c->wbuf_len != PAGE_MOD(to)) { + c->wbuf_len = PAGE_MOD(to); + /* take care of alignment to next page */ + if (!c->wbuf_len) { + c->wbuf_len = c->wbuf_pagesize; + ret = __jffs2_flush_wbuf(c, NOPAD); + if (ret) + goto outerr; } } - /* Now the outvecs array holds all the remaining data to write */ - /* Up to splitvec,split_ofs is to be written immediately. The rest - goes into the (now-empty) wbuf */ - - if (splitvec != -1) { - uint32_t remainder; - - remainder = outvecs[splitvec].iov_len - split_ofs; - outvecs[splitvec].iov_len = split_ofs; - - /* We did cross a page boundary, so we write some now */ - if (jffs2_cleanmarker_oob(c)) - ret = c->mtd->writev_ecc(c->mtd, outvecs, splitvec+1, outvec_to, &wbuf_retlen, NULL, c->oobinfo); - else - ret = jffs2_flash_direct_writev(c, outvecs, splitvec+1, outvec_to, &wbuf_retlen); + for (invec = 0; invec < count; invec++) { + int vlen = invecs[invec].iov_len; + uint8_t *v = invecs[invec].iov_base; - if (ret < 0 || wbuf_retlen != PAGE_DIV(totlen)) { - /* At this point we have no problem, - c->wbuf is empty. However refile nextblock to avoid - writing again to same address. - */ - struct jffs2_eraseblock *jeb; + wbuf_retlen = jffs2_fill_wbuf(c, v, vlen); - spin_lock(&c->erase_completion_lock); - - jeb = &c->blocks[outvec_to / c->sector_size]; - jffs2_block_refile(c, jeb, REFILE_ANYWAY); - - *retlen = 0; - spin_unlock(&c->erase_completion_lock); - goto exit; + if (c->wbuf_len == c->wbuf_pagesize) { + ret = __jffs2_flush_wbuf(c, NOPAD); + if (ret) + goto outerr; } - + vlen -= wbuf_retlen; + outvec_to += wbuf_retlen; donelen += wbuf_retlen; - c->wbuf_ofs = PAGE_DIV(outvec_to) + PAGE_DIV(totlen); + v += wbuf_retlen; - if (remainder) { - outvecs[splitvec].iov_base += split_ofs; - outvecs[splitvec].iov_len = remainder; - } else { - splitvec++; + if (vlen >= c->wbuf_pagesize) { + ret = c->mtd->write(c->mtd, outvec_to, PAGE_DIV(vlen), + &wbuf_retlen, v); + if (ret < 0 || wbuf_retlen != PAGE_DIV(vlen)) + goto outfile; + + vlen -= wbuf_retlen; + outvec_to += wbuf_retlen; + c->wbuf_ofs = outvec_to; + donelen += wbuf_retlen; + v += wbuf_retlen; + } + + wbuf_retlen = jffs2_fill_wbuf(c, v, vlen); + if (c->wbuf_len == c->wbuf_pagesize) { + ret = __jffs2_flush_wbuf(c, NOPAD); + if (ret) + goto outerr; } - } else { - splitvec = 0; + outvec_to += wbuf_retlen; + donelen += wbuf_retlen; } - /* Now splitvec points to the start of the bits we have to copy - into the wbuf */ - wbuf_ptr = c->wbuf; - - for ( ; splitvec < outvec; splitvec++) { - /* Don't copy the wbuf into itself */ - if (outvecs[splitvec].iov_base == c->wbuf) - continue; - memcpy(wbuf_ptr, outvecs[splitvec].iov_base, outvecs[splitvec].iov_len); - wbuf_ptr += outvecs[splitvec].iov_len; - donelen += outvecs[splitvec].iov_len; - } - c->wbuf_len = wbuf_ptr - c->wbuf; - - /* If there's a remainder in the wbuf and it's a non-GC write, - remember that the wbuf affects this ino */ -alldone: + /* + * If there's a remainder in the wbuf and it's a non-GC write, + * remember that the wbuf affects this ino + */ *retlen = donelen; if (jffs2_sum_active()) { @@ -836,8 +855,24 @@ alldone: jffs2_wbuf_dirties_inode(c, ino); ret = 0; + up_write(&c->wbuf_sem); + return ret; -exit: +outfile: + /* + * At this point we have no problem, c->wbuf is empty. However + * refile nextblock to avoid writing again to same address. + */ + + spin_lock(&c->erase_completion_lock); + + jeb = &c->blocks[outvec_to / c->sector_size]; + jffs2_block_refile(c, jeb, REFILE_ANYWAY); + + spin_unlock(&c->erase_completion_lock); + +outerr: + *retlen = 0; up_write(&c->wbuf_sem); return ret; } @@ -846,7 +881,8 @@ exit: * This is the entry for flash write. * Check, if we work on NAND FLASH, if so build an kvec and write it via vritev */ -int jffs2_flash_write(struct jffs2_sb_info *c, loff_t ofs, size_t len, size_t *retlen, const u_char *buf) +int jffs2_flash_write(struct jffs2_sb_info *c, loff_t ofs, size_t len, + size_t *retlen, const u_char *buf) { struct kvec vecs[1]; @@ -871,25 +907,23 @@ int jffs2_flash_read(struct jffs2_sb_inf /* Read flash */ down_read(&c->wbuf_sem); - if (jffs2_cleanmarker_oob(c)) - ret = c->mtd->read_ecc(c->mtd, ofs, len, retlen, buf, NULL, c->oobinfo); - else - ret = c->mtd->read(c->mtd, ofs, len, retlen, buf); - - if ( (ret == -EBADMSG) && (*retlen == len) ) { - printk(KERN_WARNING "mtd->read(0x%zx bytes from 0x%llx) returned ECC error\n", - len, ofs); + ret = c->mtd->read(c->mtd, ofs, len, retlen, buf); + + if ( (ret == -EBADMSG || ret == -EUCLEAN) && (*retlen == len) ) { + if (ret == -EBADMSG) + printk(KERN_WARNING "mtd->read(0x%zx bytes from 0x%llx)" + " returned ECC error\n", len, ofs); /* - * We have the raw data without ECC correction in the buffer, maybe - * we are lucky and all data or parts are correct. We check the node. - * If data are corrupted node check will sort it out. - * We keep this block, it will fail on write or erase and the we - * mark it bad. Or should we do that now? But we should give him a chance. - * Maybe we had a system crash or power loss before the ecc write or - * a erase was completed. + * We have the raw data without ECC correction in the buffer, + * maybe we are lucky and all data or parts are correct. We + * check the node. If data are corrupted node check will sort + * it out. We keep this block, it will fail on write or erase + * and the we mark it bad. Or should we do that now? But we + * should give him a chance. Maybe we had a system crash or + * power loss before the ecc write or a erase was completed. * So we return success. :) */ - ret = 0; + ret = 0; } /* if no writebuffer available or write buffer empty, return */ @@ -911,7 +945,7 @@ int jffs2_flash_read(struct jffs2_sb_inf orbf = (c->wbuf_ofs - ofs); /* offset in read buffer */ if (orbf > len) /* is write beyond write buffer ? */ goto exit; - lwbf = len - orbf; /* number of bytes to copy */ + lwbf = len - orbf; /* number of bytes to copy */ if (lwbf > c->wbuf_len) lwbf = c->wbuf_len; } @@ -923,158 +957,159 @@ exit: return ret; } +#define NR_OOB_SCAN_PAGES 4 + /* - * Check, if the out of band area is empty + * Check, if the out of band area is empty */ -int jffs2_check_oob_empty( struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb, int mode) +int jffs2_check_oob_empty(struct jffs2_sb_info *c, + struct jffs2_eraseblock *jeb, int mode) { - unsigned char *buf; - int ret = 0; - int i,len,page; - size_t retlen; - int oob_size; - - /* allocate a buffer for all oob data in this sector */ - oob_size = c->mtd->oobsize; - len = 4 * oob_size; - buf = kmalloc(len, GFP_KERNEL); - if (!buf) { - printk(KERN_NOTICE "jffs2_check_oob_empty(): allocation of temporary data buffer for oob check failed\n"); - return -ENOMEM; - } - /* - * if mode = 0, we scan for a total empty oob area, else we have - * to take care of the cleanmarker in the first page of the block - */ - ret = jffs2_flash_read_oob(c, jeb->offset, len , &retlen, buf); + int i, page, ret; + int oobsize = c->mtd->oobsize; + struct mtd_oob_ops ops; + + ops.len = NR_OOB_SCAN_PAGES * oobsize; + ops.ooblen = oobsize; + ops.oobbuf = c->oobbuf; + ops.ooboffs = 0; + ops.datbuf = NULL; + ops.mode = MTD_OOB_PLACE; + + ret = c->mtd->read_oob(c->mtd, jeb->offset, &ops); if (ret) { - D1(printk(KERN_WARNING "jffs2_check_oob_empty(): Read OOB failed %d for block at %08x\n", ret, jeb->offset)); - goto out; + D1(printk(KERN_WARNING "jffs2_check_oob_empty(): Read OOB " + "failed %d for block at %08x\n", ret, jeb->offset)); + return ret; } - if (retlen < len) { - D1(printk(KERN_WARNING "jffs2_check_oob_empty(): Read OOB return short read " - "(%zd bytes not %d) for block at %08x\n", retlen, len, jeb->offset)); - ret = -EIO; - goto out; + if (ops.retlen < ops.len) { + D1(printk(KERN_WARNING "jffs2_check_oob_empty(): Read OOB " + "returned short read (%zd bytes not %d) for block " + "at %08x\n", ops.retlen, ops.len, jeb->offset)); + return -EIO; } /* Special check for first page */ - for(i = 0; i < oob_size ; i++) { + for(i = 0; i < oobsize ; i++) { /* Yeah, we know about the cleanmarker. */ if (mode && i >= c->fsdata_pos && i < c->fsdata_pos + c->fsdata_len) continue; - if (buf[i] != 0xFF) { - D2(printk(KERN_DEBUG "Found %02x at %x in OOB for %08x\n", - buf[i], i, jeb->offset)); - ret = 1; - goto out; + if (ops.oobbuf[i] != 0xFF) { + D2(printk(KERN_DEBUG "Found %02x at %x in OOB for " + "%08x\n", ops.oobbuf[i], i, jeb->offset)); + return 1; } } /* we know, we are aligned :) */ - for (page = oob_size; page < len; page += sizeof(long)) { - unsigned long dat = *(unsigned long *)(&buf[page]); - if(dat != -1) { - ret = 1; - goto out; - } + for (page = oobsize; page < ops.len; page += sizeof(long)) { + long dat = *(long *)(&ops.oobbuf[page]); + if(dat != -1) + return 1; } - -out: - kfree(buf); - - return ret; + return 0; } /* -* Scan for a valid cleanmarker and for bad blocks -* For virtual blocks (concatenated physical blocks) check the cleanmarker -* only in the first page of the first physical block, but scan for bad blocks in all -* physical blocks -*/ -int jffs2_check_nand_cleanmarker (struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb) + * Scan for a valid cleanmarker and for bad blocks + */ +int jffs2_check_nand_cleanmarker (struct jffs2_sb_info *c, + struct jffs2_eraseblock *jeb) { struct jffs2_unknown_node n; - unsigned char buf[2 * NAND_MAX_OOBSIZE]; - unsigned char *p; - int ret, i, cnt, retval = 0; - size_t retlen, offset; - int oob_size; - - offset = jeb->offset; - oob_size = c->mtd->oobsize; - - /* Loop through the physical blocks */ - for (cnt = 0; cnt < (c->sector_size / c->mtd->erasesize); cnt++) { - /* Check first if the block is bad. */ - if (c->mtd->block_isbad (c->mtd, offset)) { - D1 (printk (KERN_WARNING "jffs2_check_nand_cleanmarker(): Bad block at %08x\n", jeb->offset)); - return 2; - } - /* - * We read oob data from page 0 and 1 of the block. - * page 0 contains cleanmarker and badblock info - * page 1 contains failure count of this block - */ - ret = c->mtd->read_oob (c->mtd, offset, oob_size << 1, &retlen, buf); + struct mtd_oob_ops ops; + int oobsize = c->mtd->oobsize; + unsigned char *p,*b; + int i, ret; + size_t offset = jeb->offset; + + /* Check first if the block is bad. */ + if (c->mtd->block_isbad(c->mtd, offset)) { + D1 (printk(KERN_WARNING "jffs2_check_nand_cleanmarker()" + ": Bad block at %08x\n", jeb->offset)); + return 2; + } + + ops.len = oobsize; + ops.ooblen = oobsize; + ops.oobbuf = c->oobbuf; + ops.ooboffs = 0; + ops.datbuf = NULL; + ops.mode = MTD_OOB_PLACE; - if (ret) { - D1 (printk (KERN_WARNING "jffs2_check_nand_cleanmarker(): Read OOB failed %d for block at %08x\n", ret, jeb->offset)); - return ret; - } - if (retlen < (oob_size << 1)) { - D1 (printk (KERN_WARNING "jffs2_check_nand_cleanmarker(): Read OOB return short read (%zd bytes not %d) for block at %08x\n", retlen, oob_size << 1, jeb->offset)); - return -EIO; - } - - /* Check cleanmarker only on the first physical block */ - if (!cnt) { - n.magic = cpu_to_je16 (JFFS2_MAGIC_BITMASK); - n.nodetype = cpu_to_je16 (JFFS2_NODETYPE_CLEANMARKER); - n.totlen = cpu_to_je32 (8); - p = (unsigned char *) &n; - - for (i = 0; i < c->fsdata_len; i++) { - if (buf[c->fsdata_pos + i] != p[i]) { - retval = 1; - } - } - D1(if (retval == 1) { - printk(KERN_WARNING "jffs2_check_nand_cleanmarker(): Cleanmarker node not detected in block at %08x\n", jeb->offset); - printk(KERN_WARNING "OOB at %08x was ", offset); - for (i=0; i < oob_size; i++) { - printk("%02x ", buf[i]); - } - printk("\n"); - }) - } - offset += c->mtd->erasesize; + ret = c->mtd->read_oob(c->mtd, offset, &ops); + if (ret) { + D1 (printk(KERN_WARNING "jffs2_check_nand_cleanmarker(): " + "Read OOB failed %d for block at %08x\n", + ret, jeb->offset)); + return ret; + } + + if (ops.retlen < ops.len) { + D1 (printk (KERN_WARNING "jffs2_check_nand_cleanmarker(): " + "Read OOB return short read (%zd bytes not %d) " + "for block at %08x\n", ops.retlen, ops.len, + jeb->offset)); + return -EIO; + } + + n.magic = cpu_to_je16 (JFFS2_MAGIC_BITMASK); + n.nodetype = cpu_to_je16 (JFFS2_NODETYPE_CLEANMARKER); + n.totlen = cpu_to_je32 (8); + p = (unsigned char *) &n; + b = c->oobbuf + c->fsdata_pos; + + for (i = c->fsdata_len; i; i--) { + if (*b++ != *p++) + ret = 1; } - return retval; + + D1(if (ret == 1) { + printk(KERN_WARNING "jffs2_check_nand_cleanmarker(): " + "Cleanmarker node not detected in block at %08x\n", + offset); + printk(KERN_WARNING "OOB at %08zx was ", offset); + for (i=0; i < oobsize; i++) + printk("%02x ", c->oobbuf[i]); + printk("\n"); + }); + return ret; } -int jffs2_write_nand_cleanmarker(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb) +int jffs2_write_nand_cleanmarker(struct jffs2_sb_info *c, + struct jffs2_eraseblock *jeb) { - struct jffs2_unknown_node n; - int ret; - size_t retlen; + struct jffs2_unknown_node n; + int ret; + struct mtd_oob_ops ops; n.magic = cpu_to_je16(JFFS2_MAGIC_BITMASK); n.nodetype = cpu_to_je16(JFFS2_NODETYPE_CLEANMARKER); n.totlen = cpu_to_je32(8); - ret = jffs2_flash_write_oob(c, jeb->offset + c->fsdata_pos, c->fsdata_len, &retlen, (unsigned char *)&n); + ops.len = c->fsdata_len; + ops.ooblen = c->fsdata_len;; + ops.oobbuf = (uint8_t *)&n; + ops.ooboffs = c->fsdata_pos; + ops.datbuf = NULL; + ops.mode = MTD_OOB_PLACE; + + ret = c->mtd->write_oob(c->mtd, jeb->offset, &ops); if (ret) { - D1(printk(KERN_WARNING "jffs2_write_nand_cleanmarker(): Write failed for block at %08x: error %d\n", jeb->offset, ret)); + D1(printk(KERN_WARNING "jffs2_write_nand_cleanmarker(): " + "Write failed for block at %08x: error %d\n", + jeb->offset, ret)); return ret; } - if (retlen != c->fsdata_len) { - D1(printk(KERN_WARNING "jffs2_write_nand_cleanmarker(): Short write for block at %08x: %zd not %d\n", jeb->offset, retlen, c->fsdata_len)); - return ret; + if (ops.retlen != ops.len) { + D1(printk(KERN_WARNING "jffs2_write_nand_cleanmarker(): " + "Short write for block at %08x: %zd not %d\n", + jeb->offset, ops.retlen, ops.len)); + return -EIO; } return 0; } @@ -1108,18 +1143,9 @@ int jffs2_write_nand_badblock(struct jff return 1; } -#define NAND_JFFS2_OOB16_FSDALEN 8 - -static struct nand_oobinfo jffs2_oobinfo_docecc = { - .useecc = MTD_NANDECC_PLACE, - .eccbytes = 6, - .eccpos = {0,1,2,3,4,5} -}; - - static int jffs2_nand_set_oobinfo(struct jffs2_sb_info *c) { - struct nand_oobinfo *oinfo = &c->mtd->oobinfo; + struct nand_ecclayout *oinfo = c->mtd->ecclayout; /* Do this only, if we have an oob buffer */ if (!c->mtd->oobsize) @@ -1129,33 +1155,23 @@ static int jffs2_nand_set_oobinfo(struct c->cleanmarker_size = 0; /* Should we use autoplacement ? */ - if (oinfo && oinfo->useecc == MTD_NANDECC_AUTOPLACE) { - D1(printk(KERN_DEBUG "JFFS2 using autoplace on NAND\n")); - /* Get the position of the free bytes */ - if (!oinfo->oobfree[0][1]) { - printk (KERN_WARNING "jffs2_nand_set_oobinfo(): Eeep. Autoplacement selected and no empty space in oob\n"); - return -ENOSPC; - } - c->fsdata_pos = oinfo->oobfree[0][0]; - c->fsdata_len = oinfo->oobfree[0][1]; - if (c->fsdata_len > 8) - c->fsdata_len = 8; - } else { - /* This is just a legacy fallback and should go away soon */ - switch(c->mtd->ecctype) { - case MTD_ECC_RS_DiskOnChip: - printk(KERN_WARNING "JFFS2 using DiskOnChip hardware ECC without autoplacement. Fix it!\n"); - c->oobinfo = &jffs2_oobinfo_docecc; - c->fsdata_pos = 6; - c->fsdata_len = NAND_JFFS2_OOB16_FSDALEN; - c->badblock_pos = 15; - break; + if (!oinfo) { + D1(printk(KERN_DEBUG "JFFS2 on NAND. No autoplacment info found\n")); + return -EINVAL; + } + + D1(printk(KERN_DEBUG "JFFS2 using autoplace on NAND\n")); + /* Get the position of the free bytes */ + if (!oinfo->oobfree[0].length) { + printk (KERN_WARNING "jffs2_nand_set_oobinfo(): Eeep." + " Autoplacement selected and no empty space in oob\n"); + return -ENOSPC; + } + c->fsdata_pos = oinfo->oobfree[0].offset; + c->fsdata_len = oinfo->oobfree[0].length; + if (c->fsdata_len > 8) + c->fsdata_len = 8; - default: - D1(printk(KERN_DEBUG "JFFS2 on NAND. No autoplacment info found\n")); - return -EINVAL; - } - } return 0; } @@ -1165,13 +1181,17 @@ int jffs2_nand_flash_setup(struct jffs2_ /* Initialise write buffer */ init_rwsem(&c->wbuf_sem); - c->wbuf_pagesize = c->mtd->oobblock; + c->wbuf_pagesize = c->mtd->writesize; c->wbuf_ofs = 0xFFFFFFFF; c->wbuf = kmalloc(c->wbuf_pagesize, GFP_KERNEL); if (!c->wbuf) return -ENOMEM; + c->oobbuf = kmalloc(NR_OOB_SCAN_PAGES * c->mtd->oobsize, GFP_KERNEL); + if (!c->oobbuf) + return -ENOMEM; + res = jffs2_nand_set_oobinfo(c); #ifdef BREAKME @@ -1189,6 +1209,7 @@ int jffs2_nand_flash_setup(struct jffs2_ void jffs2_nand_flash_cleanup(struct jffs2_sb_info *c) { kfree(c->wbuf); + kfree(c->oobbuf); } int jffs2_dataflash_setup(struct jffs2_sb_info *c) { @@ -1236,33 +1257,14 @@ void jffs2_dataflash_cleanup(struct jffs kfree(c->wbuf); } -int jffs2_nor_ecc_flash_setup(struct jffs2_sb_info *c) { - /* Cleanmarker is actually larger on the flashes */ - c->cleanmarker_size = 16; - - /* Initialize write buffer */ - init_rwsem(&c->wbuf_sem); - c->wbuf_pagesize = c->mtd->eccsize; - c->wbuf_ofs = 0xFFFFFFFF; - - c->wbuf = kmalloc(c->wbuf_pagesize, GFP_KERNEL); - if (!c->wbuf) - return -ENOMEM; - - return 0; -} - -void jffs2_nor_ecc_flash_cleanup(struct jffs2_sb_info *c) { - kfree(c->wbuf); -} - int jffs2_nor_wbuf_flash_setup(struct jffs2_sb_info *c) { - /* Cleanmarker currently occupies a whole programming region */ - c->cleanmarker_size = MTD_PROGREGION_SIZE(c->mtd); + /* Cleanmarker currently occupies whole programming regions, + * either one or 2 for 8Byte STMicro flashes. */ + c->cleanmarker_size = max(16u, c->mtd->writesize); /* Initialize write buffer */ init_rwsem(&c->wbuf_sem); - c->wbuf_pagesize = MTD_PROGREGION_SIZE(c->mtd); + c->wbuf_pagesize = c->mtd->writesize; c->wbuf_ofs = 0xFFFFFFFF; c->wbuf = kmalloc(c->wbuf_pagesize, GFP_KERNEL); diff -puN fs/jffs2/write.c~git-mtd fs/jffs2/write.c --- devel/fs/jffs2/write.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs2/write.c 2006-05-29 15:02:34.000000000 -0700 @@ -37,7 +37,6 @@ int jffs2_do_new_inode(struct jffs2_sb_i f->inocache->nodes = (struct jffs2_raw_node_ref *)f->inocache; f->inocache->state = INO_STATE_PRESENT; - jffs2_add_ino_cache(c, f->inocache); D1(printk(KERN_DEBUG "jffs2_do_new_inode(): Assigned ino# %d\n", f->inocache->ino)); ri->ino = cpu_to_je32(f->inocache->ino); @@ -57,12 +56,14 @@ int jffs2_do_new_inode(struct jffs2_sb_i /* jffs2_write_dnode - given a raw_inode, allocate a full_dnode for it, write it to the flash, link it into the existing inode/fragment list */ -struct jffs2_full_dnode *jffs2_write_dnode(struct jffs2_sb_info *c, struct jffs2_inode_info *f, struct jffs2_raw_inode *ri, const unsigned char *data, uint32_t datalen, uint32_t flash_ofs, int alloc_mode) +struct jffs2_full_dnode *jffs2_write_dnode(struct jffs2_sb_info *c, struct jffs2_inode_info *f, + struct jffs2_raw_inode *ri, const unsigned char *data, + uint32_t datalen, int alloc_mode) { - struct jffs2_raw_node_ref *raw; struct jffs2_full_dnode *fn; size_t retlen; + uint32_t flash_ofs; struct kvec vecs[2]; int ret; int retried = 0; @@ -78,34 +79,21 @@ struct jffs2_full_dnode *jffs2_write_dno vecs[1].iov_base = (unsigned char *)data; vecs[1].iov_len = datalen; - jffs2_dbg_prewrite_paranoia_check(c, flash_ofs, vecs[0].iov_len + vecs[1].iov_len); - if (je32_to_cpu(ri->totlen) != sizeof(*ri) + datalen) { printk(KERN_WARNING "jffs2_write_dnode: ri->totlen (0x%08x) != sizeof(*ri) (0x%08zx) + datalen (0x%08x)\n", je32_to_cpu(ri->totlen), sizeof(*ri), datalen); } - raw = jffs2_alloc_raw_node_ref(); - if (!raw) - return ERR_PTR(-ENOMEM); fn = jffs2_alloc_full_dnode(); - if (!fn) { - jffs2_free_raw_node_ref(raw); + if (!fn) return ERR_PTR(-ENOMEM); - } - - fn->ofs = je32_to_cpu(ri->offset); - fn->size = je32_to_cpu(ri->dsize); - fn->frags = 0; /* check number of valid vecs */ if (!datalen || !data) cnt = 1; retry: - fn->raw = raw; + flash_ofs = write_ofs(c); - raw->flash_offset = flash_ofs; - raw->__totlen = PAD(sizeof(*ri)+datalen); - raw->next_phys = NULL; + jffs2_dbg_prewrite_paranoia_check(c, flash_ofs, vecs[0].iov_len + vecs[1].iov_len); if ((alloc_mode!=ALLOC_GC) && (je32_to_cpu(ri->version) < f->highest_version)) { BUG_ON(!retried); @@ -125,22 +113,16 @@ struct jffs2_full_dnode *jffs2_write_dno /* Mark the space as dirtied */ if (retlen) { - /* Doesn't belong to any inode */ - raw->next_in_ino = NULL; - /* Don't change raw->size to match retlen. We may have written the node header already, and only the data will seem corrupted, in which case the scan would skip over any node we write before the original intended end of this node */ - raw->flash_offset |= REF_OBSOLETE; - jffs2_add_physical_node_ref(c, raw); - jffs2_mark_node_obsolete(c, raw); + jffs2_add_physical_node_ref(c, flash_ofs | REF_OBSOLETE, PAD(sizeof(*ri)+datalen), NULL); } else { - printk(KERN_NOTICE "Not marking the space at 0x%08x as dirty because the flash driver returned retlen zero\n", raw->flash_offset); - jffs2_free_raw_node_ref(raw); + printk(KERN_NOTICE "Not marking the space at 0x%08x as dirty because the flash driver returned retlen zero\n", flash_ofs); } - if (!retried && alloc_mode != ALLOC_NORETRY && (raw = jffs2_alloc_raw_node_ref())) { + if (!retried && alloc_mode != ALLOC_NORETRY) { /* Try to reallocate space and retry */ uint32_t dummy; struct jffs2_eraseblock *jeb = &c->blocks[flash_ofs / c->sector_size]; @@ -153,19 +135,20 @@ struct jffs2_full_dnode *jffs2_write_dno jffs2_dbg_acct_paranoia_check(c, jeb); if (alloc_mode == ALLOC_GC) { - ret = jffs2_reserve_space_gc(c, sizeof(*ri) + datalen, &flash_ofs, - &dummy, JFFS2_SUMMARY_INODE_SIZE); + ret = jffs2_reserve_space_gc(c, sizeof(*ri) + datalen, &dummy, + JFFS2_SUMMARY_INODE_SIZE); } else { /* Locking pain */ up(&f->sem); jffs2_complete_reservation(c); - ret = jffs2_reserve_space(c, sizeof(*ri) + datalen, &flash_ofs, - &dummy, alloc_mode, JFFS2_SUMMARY_INODE_SIZE); + ret = jffs2_reserve_space(c, sizeof(*ri) + datalen, &dummy, + alloc_mode, JFFS2_SUMMARY_INODE_SIZE); down(&f->sem); } if (!ret) { + flash_ofs = write_ofs(c); D1(printk(KERN_DEBUG "Allocated space at 0x%08x to retry failed write.\n", flash_ofs)); jffs2_dbg_acct_sanity_check(c,jeb); @@ -174,7 +157,6 @@ struct jffs2_full_dnode *jffs2_write_dno goto retry; } D1(printk(KERN_DEBUG "Failed to allocate space to retry failed write: %d!\n", ret)); - jffs2_free_raw_node_ref(raw); } /* Release the full_dnode which is now useless, and return */ jffs2_free_full_dnode(fn); @@ -188,20 +170,17 @@ struct jffs2_full_dnode *jffs2_write_dno if ((je32_to_cpu(ri->dsize) >= PAGE_CACHE_SIZE) || ( ((je32_to_cpu(ri->offset)&(PAGE_CACHE_SIZE-1))==0) && (je32_to_cpu(ri->dsize)+je32_to_cpu(ri->offset) == je32_to_cpu(ri->isize)))) { - raw->flash_offset |= REF_PRISTINE; + flash_ofs |= REF_PRISTINE; } else { - raw->flash_offset |= REF_NORMAL; + flash_ofs |= REF_NORMAL; } - jffs2_add_physical_node_ref(c, raw); - - /* Link into per-inode list */ - spin_lock(&c->erase_completion_lock); - raw->next_in_ino = f->inocache->nodes; - f->inocache->nodes = raw; - spin_unlock(&c->erase_completion_lock); + fn->raw = jffs2_add_physical_node_ref(c, flash_ofs, PAD(sizeof(*ri)+datalen), f->inocache); + fn->ofs = je32_to_cpu(ri->offset); + fn->size = je32_to_cpu(ri->dsize); + fn->frags = 0; D1(printk(KERN_DEBUG "jffs2_write_dnode wrote node at 0x%08x(%d) with dsize 0x%x, csize 0x%x, node_crc 0x%08x, data_crc 0x%08x, totlen 0x%08x\n", - flash_ofs, ref_flags(raw), je32_to_cpu(ri->dsize), + flash_ofs & ~3, flash_ofs & 3, je32_to_cpu(ri->dsize), je32_to_cpu(ri->csize), je32_to_cpu(ri->node_crc), je32_to_cpu(ri->data_crc), je32_to_cpu(ri->totlen))); @@ -212,12 +191,14 @@ struct jffs2_full_dnode *jffs2_write_dno return fn; } -struct jffs2_full_dirent *jffs2_write_dirent(struct jffs2_sb_info *c, struct jffs2_inode_info *f, struct jffs2_raw_dirent *rd, const unsigned char *name, uint32_t namelen, uint32_t flash_ofs, int alloc_mode) +struct jffs2_full_dirent *jffs2_write_dirent(struct jffs2_sb_info *c, struct jffs2_inode_info *f, + struct jffs2_raw_dirent *rd, const unsigned char *name, + uint32_t namelen, int alloc_mode) { - struct jffs2_raw_node_ref *raw; struct jffs2_full_dirent *fd; size_t retlen; struct kvec vecs[2]; + uint32_t flash_ofs; int retried = 0; int ret; @@ -228,26 +209,16 @@ struct jffs2_full_dirent *jffs2_write_di D1(if(je32_to_cpu(rd->hdr_crc) != crc32(0, rd, sizeof(struct jffs2_unknown_node)-4)) { printk(KERN_CRIT "Eep. CRC not correct in jffs2_write_dirent()\n"); BUG(); - } - ); + }); vecs[0].iov_base = rd; vecs[0].iov_len = sizeof(*rd); vecs[1].iov_base = (unsigned char *)name; vecs[1].iov_len = namelen; - jffs2_dbg_prewrite_paranoia_check(c, flash_ofs, vecs[0].iov_len + vecs[1].iov_len); - - raw = jffs2_alloc_raw_node_ref(); - - if (!raw) - return ERR_PTR(-ENOMEM); - fd = jffs2_alloc_full_dirent(namelen+1); - if (!fd) { - jffs2_free_raw_node_ref(raw); + if (!fd) return ERR_PTR(-ENOMEM); - } fd->version = je32_to_cpu(rd->version); fd->ino = je32_to_cpu(rd->ino); @@ -257,11 +228,9 @@ struct jffs2_full_dirent *jffs2_write_di fd->name[namelen]=0; retry: - fd->raw = raw; + flash_ofs = write_ofs(c); - raw->flash_offset = flash_ofs; - raw->__totlen = PAD(sizeof(*rd)+namelen); - raw->next_phys = NULL; + jffs2_dbg_prewrite_paranoia_check(c, flash_ofs, vecs[0].iov_len + vecs[1].iov_len); if ((alloc_mode!=ALLOC_GC) && (je32_to_cpu(rd->version) < f->highest_version)) { BUG_ON(!retried); @@ -280,15 +249,11 @@ struct jffs2_full_dirent *jffs2_write_di sizeof(*rd)+namelen, flash_ofs, ret, retlen); /* Mark the space as dirtied */ if (retlen) { - raw->next_in_ino = NULL; - raw->flash_offset |= REF_OBSOLETE; - jffs2_add_physical_node_ref(c, raw); - jffs2_mark_node_obsolete(c, raw); + jffs2_add_physical_node_ref(c, flash_ofs | REF_OBSOLETE, PAD(sizeof(*rd)+namelen), NULL); } else { - printk(KERN_NOTICE "Not marking the space at 0x%08x as dirty because the flash driver returned retlen zero\n", raw->flash_offset); - jffs2_free_raw_node_ref(raw); + printk(KERN_NOTICE "Not marking the space at 0x%08x as dirty because the flash driver returned retlen zero\n", flash_ofs); } - if (!retried && (raw = jffs2_alloc_raw_node_ref())) { + if (!retried) { /* Try to reallocate space and retry */ uint32_t dummy; struct jffs2_eraseblock *jeb = &c->blocks[flash_ofs / c->sector_size]; @@ -301,39 +266,33 @@ struct jffs2_full_dirent *jffs2_write_di jffs2_dbg_acct_paranoia_check(c, jeb); if (alloc_mode == ALLOC_GC) { - ret = jffs2_reserve_space_gc(c, sizeof(*rd) + namelen, &flash_ofs, - &dummy, JFFS2_SUMMARY_DIRENT_SIZE(namelen)); + ret = jffs2_reserve_space_gc(c, sizeof(*rd) + namelen, &dummy, + JFFS2_SUMMARY_DIRENT_SIZE(namelen)); } else { /* Locking pain */ up(&f->sem); jffs2_complete_reservation(c); - ret = jffs2_reserve_space(c, sizeof(*rd) + namelen, &flash_ofs, - &dummy, alloc_mode, JFFS2_SUMMARY_DIRENT_SIZE(namelen)); + ret = jffs2_reserve_space(c, sizeof(*rd) + namelen, &dummy, + alloc_mode, JFFS2_SUMMARY_DIRENT_SIZE(namelen)); down(&f->sem); } if (!ret) { + flash_ofs = write_ofs(c); D1(printk(KERN_DEBUG "Allocated space at 0x%08x to retry failed write.\n", flash_ofs)); jffs2_dbg_acct_sanity_check(c,jeb); jffs2_dbg_acct_paranoia_check(c, jeb); goto retry; } D1(printk(KERN_DEBUG "Failed to allocate space to retry failed write: %d!\n", ret)); - jffs2_free_raw_node_ref(raw); } /* Release the full_dnode which is now useless, and return */ jffs2_free_full_dirent(fd); return ERR_PTR(ret?ret:-EIO); } /* Mark the space used */ - raw->flash_offset |= REF_PRISTINE; - jffs2_add_physical_node_ref(c, raw); - - spin_lock(&c->erase_completion_lock); - raw->next_in_ino = f->inocache->nodes; - f->inocache->nodes = raw; - spin_unlock(&c->erase_completion_lock); + fd->raw = jffs2_add_physical_node_ref(c, flash_ofs | REF_PRISTINE, PAD(sizeof(*rd)+namelen), f->inocache); if (retried) { jffs2_dbg_acct_sanity_check(c,NULL); @@ -359,14 +318,14 @@ int jffs2_write_inode_range(struct jffs2 struct jffs2_full_dnode *fn; unsigned char *comprbuf = NULL; uint16_t comprtype = JFFS2_COMPR_NONE; - uint32_t phys_ofs, alloclen; + uint32_t alloclen; uint32_t datalen, cdatalen; int retried = 0; retry: D2(printk(KERN_DEBUG "jffs2_commit_write() loop: 0x%x to write to 0x%x\n", writelen, offset)); - ret = jffs2_reserve_space(c, sizeof(*ri) + JFFS2_MIN_DATA_LEN, &phys_ofs, + ret = jffs2_reserve_space(c, sizeof(*ri) + JFFS2_MIN_DATA_LEN, &alloclen, ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE); if (ret) { D1(printk(KERN_DEBUG "jffs2_reserve_space returned %d\n", ret)); @@ -394,7 +353,7 @@ int jffs2_write_inode_range(struct jffs2 ri->node_crc = cpu_to_je32(crc32(0, ri, sizeof(*ri)-8)); ri->data_crc = cpu_to_je32(crc32(0, comprbuf, cdatalen)); - fn = jffs2_write_dnode(c, f, ri, comprbuf, cdatalen, phys_ofs, ALLOC_NORETRY); + fn = jffs2_write_dnode(c, f, ri, comprbuf, cdatalen, ALLOC_NORETRY); jffs2_free_comprbuf(comprbuf, buf); @@ -448,13 +407,13 @@ int jffs2_do_create(struct jffs2_sb_info struct jffs2_raw_dirent *rd; struct jffs2_full_dnode *fn; struct jffs2_full_dirent *fd; - uint32_t alloclen, phys_ofs; + uint32_t alloclen; int ret; /* Try to reserve enough space for both node and dirent. * Just the node will do for now, though */ - ret = jffs2_reserve_space(c, sizeof(*ri), &phys_ofs, &alloclen, ALLOC_NORMAL, + ret = jffs2_reserve_space(c, sizeof(*ri), &alloclen, ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE); D1(printk(KERN_DEBUG "jffs2_do_create(): reserved 0x%x bytes\n", alloclen)); if (ret) { @@ -465,7 +424,7 @@ int jffs2_do_create(struct jffs2_sb_info ri->data_crc = cpu_to_je32(0); ri->node_crc = cpu_to_je32(crc32(0, ri, sizeof(*ri)-8)); - fn = jffs2_write_dnode(c, f, ri, NULL, 0, phys_ofs, ALLOC_NORMAL); + fn = jffs2_write_dnode(c, f, ri, NULL, 0, ALLOC_NORMAL); D1(printk(KERN_DEBUG "jffs2_do_create created file with mode 0x%x\n", jemode_to_cpu(ri->mode))); @@ -484,7 +443,7 @@ int jffs2_do_create(struct jffs2_sb_info up(&f->sem); jffs2_complete_reservation(c); - ret = jffs2_reserve_space(c, sizeof(*rd)+namelen, &phys_ofs, &alloclen, + ret = jffs2_reserve_space(c, sizeof(*rd)+namelen, &alloclen, ALLOC_NORMAL, JFFS2_SUMMARY_DIRENT_SIZE(namelen)); if (ret) { @@ -516,7 +475,7 @@ int jffs2_do_create(struct jffs2_sb_info rd->node_crc = cpu_to_je32(crc32(0, rd, sizeof(*rd)-8)); rd->name_crc = cpu_to_je32(crc32(0, name, namelen)); - fd = jffs2_write_dirent(c, dir_f, rd, name, namelen, phys_ofs, ALLOC_NORMAL); + fd = jffs2_write_dirent(c, dir_f, rd, name, namelen, ALLOC_NORMAL); jffs2_free_raw_dirent(rd); @@ -545,7 +504,7 @@ int jffs2_do_unlink(struct jffs2_sb_info { struct jffs2_raw_dirent *rd; struct jffs2_full_dirent *fd; - uint32_t alloclen, phys_ofs; + uint32_t alloclen; int ret; if (1 /* alternative branch needs testing */ || @@ -556,7 +515,7 @@ int jffs2_do_unlink(struct jffs2_sb_info if (!rd) return -ENOMEM; - ret = jffs2_reserve_space(c, sizeof(*rd)+namelen, &phys_ofs, &alloclen, + ret = jffs2_reserve_space(c, sizeof(*rd)+namelen, &alloclen, ALLOC_DELETION, JFFS2_SUMMARY_DIRENT_SIZE(namelen)); if (ret) { jffs2_free_raw_dirent(rd); @@ -580,7 +539,7 @@ int jffs2_do_unlink(struct jffs2_sb_info rd->node_crc = cpu_to_je32(crc32(0, rd, sizeof(*rd)-8)); rd->name_crc = cpu_to_je32(crc32(0, name, namelen)); - fd = jffs2_write_dirent(c, dir_f, rd, name, namelen, phys_ofs, ALLOC_DELETION); + fd = jffs2_write_dirent(c, dir_f, rd, name, namelen, ALLOC_DELETION); jffs2_free_raw_dirent(rd); @@ -659,14 +618,14 @@ int jffs2_do_link (struct jffs2_sb_info { struct jffs2_raw_dirent *rd; struct jffs2_full_dirent *fd; - uint32_t alloclen, phys_ofs; + uint32_t alloclen; int ret; rd = jffs2_alloc_raw_dirent(); if (!rd) return -ENOMEM; - ret = jffs2_reserve_space(c, sizeof(*rd)+namelen, &phys_ofs, &alloclen, + ret = jffs2_reserve_space(c, sizeof(*rd)+namelen, &alloclen, ALLOC_NORMAL, JFFS2_SUMMARY_DIRENT_SIZE(namelen)); if (ret) { jffs2_free_raw_dirent(rd); @@ -692,7 +651,7 @@ int jffs2_do_link (struct jffs2_sb_info rd->node_crc = cpu_to_je32(crc32(0, rd, sizeof(*rd)-8)); rd->name_crc = cpu_to_je32(crc32(0, name, namelen)); - fd = jffs2_write_dirent(c, dir_f, rd, name, namelen, phys_ofs, ALLOC_NORMAL); + fd = jffs2_write_dirent(c, dir_f, rd, name, namelen, ALLOC_NORMAL); jffs2_free_raw_dirent(rd); diff -puN /dev/null fs/jffs2/xattr.c --- /dev/null 2006-05-29 10:18:53.280907750 -0700 +++ devel-akpm/fs/jffs2/xattr.c 2006-05-29 15:02:34.000000000 -0700 @@ -0,0 +1,1238 @@ +/* + * JFFS2 -- Journalling Flash File System, Version 2. + * + * Copyright (C) 2006 NEC Corporation + * + * Created by KaiGai Kohei + * + * For licensing information, see the file 'LICENCE' in this directory. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "nodelist.h" +/* -------- xdatum related functions ---------------- + * xattr_datum_hashkey(xprefix, xname, xvalue, xsize) + * is used to calcurate xdatum hashkey. The reminder of hashkey into XATTRINDEX_HASHSIZE is + * the index of the xattr name/value pair cache (c->xattrindex). + * unload_xattr_datum(c, xd) + * is used to release xattr name/value pair and detach from c->xattrindex. + * reclaim_xattr_datum(c) + * is used to reclaim xattr name/value pairs on the xattr name/value pair cache when + * memory usage by cache is over c->xdatum_mem_threshold. Currentry, this threshold + * is hard coded as 32KiB. + * delete_xattr_datum_node(c, xd) + * is used to delete a jffs2 node is dominated by xdatum. When EBS(Erase Block Summary) is + * enabled, it overwrites the obsolete node by myself. + * delete_xattr_datum(c, xd) + * is used to delete jffs2_xattr_datum object. It must be called with 0-value of reference + * counter. (It means how many jffs2_xattr_ref object refers this xdatum.) + * do_verify_xattr_datum(c, xd) + * is used to load the xdatum informations without name/value pair from the medium. + * It's necessary once, because those informations are not collected during mounting + * process when EBS is enabled. + * 0 will be returned, if success. An negative return value means recoverable error, and + * positive return value means unrecoverable error. Thus, caller must remove this xdatum + * and xref when it returned positive value. + * do_load_xattr_datum(c, xd) + * is used to load name/value pair from the medium. + * The meanings of return value is same as do_verify_xattr_datum(). + * load_xattr_datum(c, xd) + * is used to be as a wrapper of do_verify_xattr_datum() and do_load_xattr_datum(). + * If xd need to call do_verify_xattr_datum() at first, it's called before calling + * do_load_xattr_datum(). The meanings of return value is same as do_verify_xattr_datum(). + * save_xattr_datum(c, xd) + * is used to write xdatum to medium. xd->version will be incremented. + * create_xattr_datum(c, xprefix, xname, xvalue, xsize) + * is used to create new xdatum and write to medium. + * -------------------------------------------------- */ + +static uint32_t xattr_datum_hashkey(int xprefix, const char *xname, const char *xvalue, int xsize) +{ + int name_len = strlen(xname); + + return crc32(xprefix, xname, name_len) ^ crc32(xprefix, xvalue, xsize); +} + +static void unload_xattr_datum(struct jffs2_sb_info *c, struct jffs2_xattr_datum *xd) +{ + /* must be called under down_write(xattr_sem) */ + D1(dbg_xattr("%s: xid=%u, version=%u\n", __FUNCTION__, xd->xid, xd->version)); + if (xd->xname) { + c->xdatum_mem_usage -= (xd->name_len + 1 + xd->value_len); + kfree(xd->xname); + } + + list_del_init(&xd->xindex); + xd->hashkey = 0; + xd->xname = NULL; + xd->xvalue = NULL; +} + +static void reclaim_xattr_datum(struct jffs2_sb_info *c) +{ + /* must be called under down_write(xattr_sem) */ + struct jffs2_xattr_datum *xd, *_xd; + uint32_t target, before; + static int index = 0; + int count; + + if (c->xdatum_mem_threshold > c->xdatum_mem_usage) + return; + + before = c->xdatum_mem_usage; + target = c->xdatum_mem_usage * 4 / 5; /* 20% reduction */ + for (count = 0; count < XATTRINDEX_HASHSIZE; count++) { + list_for_each_entry_safe(xd, _xd, &c->xattrindex[index], xindex) { + if (xd->flags & JFFS2_XFLAGS_HOT) { + xd->flags &= ~JFFS2_XFLAGS_HOT; + } else if (!(xd->flags & JFFS2_XFLAGS_BIND)) { + unload_xattr_datum(c, xd); + } + if (c->xdatum_mem_usage <= target) + goto out; + } + index = (index+1) % XATTRINDEX_HASHSIZE; + } + out: + JFFS2_NOTICE("xdatum_mem_usage from %u byte to %u byte (%u byte reclaimed)\n", + before, c->xdatum_mem_usage, before - c->xdatum_mem_usage); +} + +static void delete_xattr_datum_node(struct jffs2_sb_info *c, struct jffs2_xattr_datum *xd) +{ + /* must be called under down_write(xattr_sem) */ + struct jffs2_raw_xattr rx; + size_t length; + int rc; + + if (!xd->node) { + JFFS2_WARNING("xdatum (xid=%u) is removed twice.\n", xd->xid); + return; + } + if (jffs2_sum_active()) { + memset(&rx, 0xff, sizeof(struct jffs2_raw_xattr)); + rc = jffs2_flash_read(c, ref_offset(xd->node), + sizeof(struct jffs2_unknown_node), + &length, (char *)&rx); + if (rc || length != sizeof(struct jffs2_unknown_node)) { + JFFS2_ERROR("jffs2_flash_read()=%d, req=%zu, read=%zu at %#08x\n", + rc, sizeof(struct jffs2_unknown_node), + length, ref_offset(xd->node)); + } + rc = jffs2_flash_write(c, ref_offset(xd->node), sizeof(rx), + &length, (char *)&rx); + if (rc || length != sizeof(struct jffs2_raw_xattr)) { + JFFS2_ERROR("jffs2_flash_write()=%d, req=%zu, wrote=%zu ar %#08x\n", + rc, sizeof(rx), length, ref_offset(xd->node)); + } + } + spin_lock(&c->erase_completion_lock); + xd->node->next_in_ino = NULL; + spin_unlock(&c->erase_completion_lock); + jffs2_mark_node_obsolete(c, xd->node); + xd->node = NULL; +} + +static void delete_xattr_datum(struct jffs2_sb_info *c, struct jffs2_xattr_datum *xd) +{ + /* must be called under down_write(xattr_sem) */ + BUG_ON(xd->refcnt); + + unload_xattr_datum(c, xd); + if (xd->node) { + delete_xattr_datum_node(c, xd); + xd->node = NULL; + } + jffs2_free_xattr_datum(xd); +} + +static int do_verify_xattr_datum(struct jffs2_sb_info *c, struct jffs2_xattr_datum *xd) +{ + /* must be called under down_write(xattr_sem) */ + struct jffs2_eraseblock *jeb; + struct jffs2_raw_xattr rx; + size_t readlen; + uint32_t crc, totlen; + int rc; + + BUG_ON(!xd->node); + BUG_ON(ref_flags(xd->node) != REF_UNCHECKED); + + rc = jffs2_flash_read(c, ref_offset(xd->node), sizeof(rx), &readlen, (char *)&rx); + if (rc || readlen != sizeof(rx)) { + JFFS2_WARNING("jffs2_flash_read()=%d, req=%zu, read=%zu at %#08x\n", + rc, sizeof(rx), readlen, ref_offset(xd->node)); + return rc ? rc : -EIO; + } + crc = crc32(0, &rx, sizeof(rx) - 4); + if (crc != je32_to_cpu(rx.node_crc)) { + if (je32_to_cpu(rx.node_crc) != 0xffffffff) + JFFS2_ERROR("node CRC failed at %#08x, read=%#08x, calc=%#08x\n", + ref_offset(xd->node), je32_to_cpu(rx.hdr_crc), crc); + return EIO; + } + totlen = PAD(sizeof(rx) + rx.name_len + 1 + je16_to_cpu(rx.value_len)); + if (je16_to_cpu(rx.magic) != JFFS2_MAGIC_BITMASK + || je16_to_cpu(rx.nodetype) != JFFS2_NODETYPE_XATTR + || je32_to_cpu(rx.totlen) != totlen + || je32_to_cpu(rx.xid) != xd->xid + || je32_to_cpu(rx.version) != xd->version) { + JFFS2_ERROR("inconsistent xdatum at %#08x, magic=%#04x/%#04x, " + "nodetype=%#04x/%#04x, totlen=%u/%u, xid=%u/%u, version=%u/%u\n", + ref_offset(xd->node), je16_to_cpu(rx.magic), JFFS2_MAGIC_BITMASK, + je16_to_cpu(rx.nodetype), JFFS2_NODETYPE_XATTR, + je32_to_cpu(rx.totlen), totlen, + je32_to_cpu(rx.xid), xd->xid, + je32_to_cpu(rx.version), xd->version); + return EIO; + } + xd->xprefix = rx.xprefix; + xd->name_len = rx.name_len; + xd->value_len = je16_to_cpu(rx.value_len); + xd->data_crc = je32_to_cpu(rx.data_crc); + + /* This JFFS2_NODETYPE_XATTR node is checked */ + jeb = &c->blocks[ref_offset(xd->node) / c->sector_size]; + totlen = PAD(je32_to_cpu(rx.totlen)); + + spin_lock(&c->erase_completion_lock); + c->unchecked_size -= totlen; c->used_size += totlen; + jeb->unchecked_size -= totlen; jeb->used_size += totlen; + xd->node->flash_offset = ref_offset(xd->node) | REF_PRISTINE; + spin_unlock(&c->erase_completion_lock); + + /* unchecked xdatum is chained with c->xattr_unchecked */ + list_del_init(&xd->xindex); + + dbg_xattr("success on verfying xdatum (xid=%u, version=%u)\n", + xd->xid, xd->version); + + return 0; +} + +static int do_load_xattr_datum(struct jffs2_sb_info *c, struct jffs2_xattr_datum *xd) +{ + /* must be called under down_write(xattr_sem) */ + char *data; + size_t readlen; + uint32_t crc, length; + int i, ret, retry = 0; + + BUG_ON(!xd->node); + BUG_ON(ref_flags(xd->node) != REF_PRISTINE); + BUG_ON(!list_empty(&xd->xindex)); + retry: + length = xd->name_len + 1 + xd->value_len; + data = kmalloc(length, GFP_KERNEL); + if (!data) + return -ENOMEM; + + ret = jffs2_flash_read(c, ref_offset(xd->node)+sizeof(struct jffs2_raw_xattr), + length, &readlen, data); + + if (ret || length!=readlen) { + JFFS2_WARNING("jffs2_flash_read() returned %d, request=%d, readlen=%zu, at %#08x\n", + ret, length, readlen, ref_offset(xd->node)); + kfree(data); + return ret ? ret : -EIO; + } + + data[xd->name_len] = '\0'; + crc = crc32(0, data, length); + if (crc != xd->data_crc) { + JFFS2_WARNING("node CRC failed (JFFS2_NODETYPE_XREF)" + " at %#08x, read: 0x%08x calculated: 0x%08x\n", + ref_offset(xd->node), xd->data_crc, crc); + kfree(data); + return EIO; + } + + xd->flags |= JFFS2_XFLAGS_HOT; + xd->xname = data; + xd->xvalue = data + xd->name_len+1; + + c->xdatum_mem_usage += length; + + xd->hashkey = xattr_datum_hashkey(xd->xprefix, xd->xname, xd->xvalue, xd->value_len); + i = xd->hashkey % XATTRINDEX_HASHSIZE; + list_add(&xd->xindex, &c->xattrindex[i]); + if (!retry) { + retry = 1; + reclaim_xattr_datum(c); + if (!xd->xname) + goto retry; + } + + dbg_xattr("success on loading xdatum (xid=%u, xprefix=%u, xname='%s')\n", + xd->xid, xd->xprefix, xd->xname); + + return 0; +} + +static int load_xattr_datum(struct jffs2_sb_info *c, struct jffs2_xattr_datum *xd) +{ + /* must be called under down_write(xattr_sem); + * rc < 0 : recoverable error, try again + * rc = 0 : success + * rc > 0 : Unrecoverable error, this node should be deleted. + */ + int rc = 0; + BUG_ON(xd->xname); + if (!xd->node) + return EIO; + if (unlikely(ref_flags(xd->node) != REF_PRISTINE)) { + rc = do_verify_xattr_datum(c, xd); + if (rc > 0) { + list_del_init(&xd->xindex); + delete_xattr_datum_node(c, xd); + } + } + if (!rc) + rc = do_load_xattr_datum(c, xd); + return rc; +} + +static int save_xattr_datum(struct jffs2_sb_info *c, struct jffs2_xattr_datum *xd) +{ + /* must be called under down_write(xattr_sem) */ + struct jffs2_raw_node_ref *raw; + struct jffs2_raw_xattr rx; + struct kvec vecs[2]; + size_t length; + int rc, totlen; + uint32_t phys_ofs = write_ofs(c); + + BUG_ON(!xd->xname); + + vecs[0].iov_base = ℞ + vecs[0].iov_len = PAD(sizeof(rx)); + vecs[1].iov_base = xd->xname; + vecs[1].iov_len = xd->name_len + 1 + xd->value_len; + totlen = vecs[0].iov_len + vecs[1].iov_len; + + /* Setup raw-xattr */ + rx.magic = cpu_to_je16(JFFS2_MAGIC_BITMASK); + rx.nodetype = cpu_to_je16(JFFS2_NODETYPE_XATTR); + rx.totlen = cpu_to_je32(PAD(totlen)); + rx.hdr_crc = cpu_to_je32(crc32(0, &rx, sizeof(struct jffs2_unknown_node) - 4)); + + rx.xid = cpu_to_je32(xd->xid); + rx.version = cpu_to_je32(++xd->version); + rx.xprefix = xd->xprefix; + rx.name_len = xd->name_len; + rx.value_len = cpu_to_je16(xd->value_len); + rx.data_crc = cpu_to_je32(crc32(0, vecs[1].iov_base, vecs[1].iov_len)); + rx.node_crc = cpu_to_je32(crc32(0, &rx, sizeof(struct jffs2_raw_xattr) - 4)); + + rc = jffs2_flash_writev(c, vecs, 2, phys_ofs, &length, 0); + if (rc || totlen != length) { + JFFS2_WARNING("jffs2_flash_writev()=%d, req=%u, wrote=%zu, at %#08x\n", + rc, totlen, length, phys_ofs); + rc = rc ? rc : -EIO; + if (length) + jffs2_add_physical_node_ref(c, phys_ofs | REF_OBSOLETE, PAD(totlen), NULL); + + return rc; + } + + /* success */ + raw = jffs2_add_physical_node_ref(c, phys_ofs | REF_PRISTINE, PAD(totlen), NULL); + /* FIXME */ raw->next_in_ino = (void *)xd; + + if (xd->node) + delete_xattr_datum_node(c, xd); + xd->node = raw; + + dbg_xattr("success on saving xdatum (xid=%u, version=%u, xprefix=%u, xname='%s')\n", + xd->xid, xd->version, xd->xprefix, xd->xname); + + return 0; +} + +static struct jffs2_xattr_datum *create_xattr_datum(struct jffs2_sb_info *c, + int xprefix, const char *xname, + const char *xvalue, int xsize) +{ + /* must be called under down_write(xattr_sem) */ + struct jffs2_xattr_datum *xd; + uint32_t hashkey, name_len; + char *data; + int i, rc; + + /* Search xattr_datum has same xname/xvalue by index */ + hashkey = xattr_datum_hashkey(xprefix, xname, xvalue, xsize); + i = hashkey % XATTRINDEX_HASHSIZE; + list_for_each_entry(xd, &c->xattrindex[i], xindex) { + if (xd->hashkey==hashkey + && xd->xprefix==xprefix + && xd->value_len==xsize + && !strcmp(xd->xname, xname) + && !memcmp(xd->xvalue, xvalue, xsize)) { + xd->refcnt++; + return xd; + } + } + + /* Not found, Create NEW XATTR-Cache */ + name_len = strlen(xname); + + xd = jffs2_alloc_xattr_datum(); + if (!xd) + return ERR_PTR(-ENOMEM); + + data = kmalloc(name_len + 1 + xsize, GFP_KERNEL); + if (!data) { + jffs2_free_xattr_datum(xd); + return ERR_PTR(-ENOMEM); + } + strcpy(data, xname); + memcpy(data + name_len + 1, xvalue, xsize); + + xd->refcnt = 1; + xd->xid = ++c->highest_xid; + xd->flags |= JFFS2_XFLAGS_HOT; + xd->xprefix = xprefix; + + xd->hashkey = hashkey; + xd->xname = data; + xd->xvalue = data + name_len + 1; + xd->name_len = name_len; + xd->value_len = xsize; + xd->data_crc = crc32(0, data, xd->name_len + 1 + xd->value_len); + + rc = save_xattr_datum(c, xd); + if (rc) { + kfree(xd->xname); + jffs2_free_xattr_datum(xd); + return ERR_PTR(rc); + } + + /* Insert Hash Index */ + i = hashkey % XATTRINDEX_HASHSIZE; + list_add(&xd->xindex, &c->xattrindex[i]); + + c->xdatum_mem_usage += (xd->name_len + 1 + xd->value_len); + reclaim_xattr_datum(c); + + return xd; +} + +/* -------- xref related functions ------------------ + * verify_xattr_ref(c, ref) + * is used to load xref information from medium. Because summary data does not + * contain xid/ino, it's necessary to verify once while mounting process. + * delete_xattr_ref_node(c, ref) + * is used to delete a jffs2 node is dominated by xref. When EBS is enabled, + * it overwrites the obsolete node by myself. + * delete_xattr_ref(c, ref) + * is used to delete jffs2_xattr_ref object. If the reference counter of xdatum + * is refered by this xref become 0, delete_xattr_datum() is called later. + * save_xattr_ref(c, ref) + * is used to write xref to medium. + * create_xattr_ref(c, ic, xd) + * is used to create a new xref and write to medium. + * jffs2_xattr_delete_inode(c, ic) + * is called to remove xrefs related to obsolete inode when inode is unlinked. + * jffs2_xattr_free_inode(c, ic) + * is called to release xattr related objects when unmounting. + * check_xattr_ref_inode(c, ic) + * is used to confirm inode does not have duplicate xattr name/value pair. + * -------------------------------------------------- */ +static int verify_xattr_ref(struct jffs2_sb_info *c, struct jffs2_xattr_ref *ref) +{ + struct jffs2_eraseblock *jeb; + struct jffs2_raw_xref rr; + size_t readlen; + uint32_t crc, totlen; + int rc; + + BUG_ON(ref_flags(ref->node) != REF_UNCHECKED); + + rc = jffs2_flash_read(c, ref_offset(ref->node), sizeof(rr), &readlen, (char *)&rr); + if (rc || sizeof(rr) != readlen) { + JFFS2_WARNING("jffs2_flash_read()=%d, req=%zu, read=%zu, at %#08x\n", + rc, sizeof(rr), readlen, ref_offset(ref->node)); + return rc ? rc : -EIO; + } + /* obsolete node */ + crc = crc32(0, &rr, sizeof(rr) - 4); + if (crc != je32_to_cpu(rr.node_crc)) { + if (je32_to_cpu(rr.node_crc) != 0xffffffff) + JFFS2_ERROR("node CRC failed at %#08x, read=%#08x, calc=%#08x\n", + ref_offset(ref->node), je32_to_cpu(rr.node_crc), crc); + return EIO; + } + if (je16_to_cpu(rr.magic) != JFFS2_MAGIC_BITMASK + || je16_to_cpu(rr.nodetype) != JFFS2_NODETYPE_XREF + || je32_to_cpu(rr.totlen) != PAD(sizeof(rr))) { + JFFS2_ERROR("inconsistent xref at %#08x, magic=%#04x/%#04x, " + "nodetype=%#04x/%#04x, totlen=%u/%zu\n", + ref_offset(ref->node), je16_to_cpu(rr.magic), JFFS2_MAGIC_BITMASK, + je16_to_cpu(rr.nodetype), JFFS2_NODETYPE_XREF, + je32_to_cpu(rr.totlen), PAD(sizeof(rr))); + return EIO; + } + ref->ino = je32_to_cpu(rr.ino); + ref->xid = je32_to_cpu(rr.xid); + + /* fixup superblock/eraseblock info */ + jeb = &c->blocks[ref_offset(ref->node) / c->sector_size]; + totlen = PAD(sizeof(rr)); + + spin_lock(&c->erase_completion_lock); + c->unchecked_size -= totlen; c->used_size += totlen; + jeb->unchecked_size -= totlen; jeb->used_size += totlen; + ref->node->flash_offset = ref_offset(ref->node) | REF_PRISTINE; + spin_unlock(&c->erase_completion_lock); + + dbg_xattr("success on verifying xref (ino=%u, xid=%u) at %#08x\n", + ref->ino, ref->xid, ref_offset(ref->node)); + return 0; +} + +static void delete_xattr_ref_node(struct jffs2_sb_info *c, struct jffs2_xattr_ref *ref) +{ + struct jffs2_raw_xref rr; + size_t length; + int rc; + + if (jffs2_sum_active()) { + memset(&rr, 0xff, sizeof(rr)); + rc = jffs2_flash_read(c, ref_offset(ref->node), + sizeof(struct jffs2_unknown_node), + &length, (char *)&rr); + if (rc || length != sizeof(struct jffs2_unknown_node)) { + JFFS2_ERROR("jffs2_flash_read()=%d, req=%zu, read=%zu at %#08x\n", + rc, sizeof(struct jffs2_unknown_node), + length, ref_offset(ref->node)); + } + rc = jffs2_flash_write(c, ref_offset(ref->node), sizeof(rr), + &length, (char *)&rr); + if (rc || length != sizeof(struct jffs2_raw_xref)) { + JFFS2_ERROR("jffs2_flash_write()=%d, req=%zu, wrote=%zu at %#08x\n", + rc, sizeof(rr), length, ref_offset(ref->node)); + } + } + spin_lock(&c->erase_completion_lock); + ref->node->next_in_ino = NULL; + spin_unlock(&c->erase_completion_lock); + jffs2_mark_node_obsolete(c, ref->node); + ref->node = NULL; +} + +static void delete_xattr_ref(struct jffs2_sb_info *c, struct jffs2_xattr_ref *ref) +{ + /* must be called under down_write(xattr_sem) */ + struct jffs2_xattr_datum *xd; + + BUG_ON(!ref->node); + delete_xattr_ref_node(c, ref); + + xd = ref->xd; + xd->refcnt--; + if (!xd->refcnt) + delete_xattr_datum(c, xd); + jffs2_free_xattr_ref(ref); +} + +static int save_xattr_ref(struct jffs2_sb_info *c, struct jffs2_xattr_ref *ref) +{ + /* must be called under down_write(xattr_sem) */ + struct jffs2_raw_node_ref *raw; + struct jffs2_raw_xref rr; + size_t length; + uint32_t phys_ofs = write_ofs(c); + int ret; + + rr.magic = cpu_to_je16(JFFS2_MAGIC_BITMASK); + rr.nodetype = cpu_to_je16(JFFS2_NODETYPE_XREF); + rr.totlen = cpu_to_je32(PAD(sizeof(rr))); + rr.hdr_crc = cpu_to_je32(crc32(0, &rr, sizeof(struct jffs2_unknown_node) - 4)); + + rr.ino = cpu_to_je32(ref->ic->ino); + rr.xid = cpu_to_je32(ref->xd->xid); + rr.node_crc = cpu_to_je32(crc32(0, &rr, sizeof(rr) - 4)); + + ret = jffs2_flash_write(c, phys_ofs, sizeof(rr), &length, (char *)&rr); + if (ret || sizeof(rr) != length) { + JFFS2_WARNING("jffs2_flash_write() returned %d, request=%zu, retlen=%zu, at %#08x\n", + ret, sizeof(rr), length, phys_ofs); + ret = ret ? ret : -EIO; + if (length) + jffs2_add_physical_node_ref(c, phys_ofs | REF_OBSOLETE, PAD(sizeof(rr)), NULL); + + return ret; + } + + raw = jffs2_add_physical_node_ref(c, phys_ofs | REF_PRISTINE, PAD(sizeof(rr)), NULL); + /* FIXME */ raw->next_in_ino = (void *)ref; + if (ref->node) + delete_xattr_ref_node(c, ref); + ref->node = raw; + + dbg_xattr("success on saving xref (ino=%u, xid=%u)\n", ref->ic->ino, ref->xd->xid); + + return 0; +} + +static struct jffs2_xattr_ref *create_xattr_ref(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic, + struct jffs2_xattr_datum *xd) +{ + /* must be called under down_write(xattr_sem) */ + struct jffs2_xattr_ref *ref; + int ret; + + ref = jffs2_alloc_xattr_ref(); + if (!ref) + return ERR_PTR(-ENOMEM); + ref->ic = ic; + ref->xd = xd; + + ret = save_xattr_ref(c, ref); + if (ret) { + jffs2_free_xattr_ref(ref); + return ERR_PTR(ret); + } + + /* Chain to inode */ + ref->next = ic->xref; + ic->xref = ref; + + return ref; /* success */ +} + +void jffs2_xattr_delete_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic) +{ + /* It's called from jffs2_clear_inode() on inode removing. + When an inode with XATTR is removed, those XATTRs must be removed. */ + struct jffs2_xattr_ref *ref, *_ref; + + if (!ic || ic->nlink > 0) + return; + + down_write(&c->xattr_sem); + for (ref = ic->xref; ref; ref = _ref) { + _ref = ref->next; + delete_xattr_ref(c, ref); + } + ic->xref = NULL; + up_write(&c->xattr_sem); +} + +void jffs2_xattr_free_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic) +{ + /* It's called from jffs2_free_ino_caches() until unmounting FS. */ + struct jffs2_xattr_datum *xd; + struct jffs2_xattr_ref *ref, *_ref; + + down_write(&c->xattr_sem); + for (ref = ic->xref; ref; ref = _ref) { + _ref = ref->next; + xd = ref->xd; + xd->refcnt--; + if (!xd->refcnt) { + unload_xattr_datum(c, xd); + jffs2_free_xattr_datum(xd); + } + jffs2_free_xattr_ref(ref); + } + ic->xref = NULL; + up_write(&c->xattr_sem); +} + +static int check_xattr_ref_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic) +{ + /* success of check_xattr_ref_inode() means taht inode (ic) dose not have + * duplicate name/value pairs. If duplicate name/value pair would be found, + * one will be removed. + */ + struct jffs2_xattr_ref *ref, *cmp, **pref; + int rc = 0; + + if (likely(ic->flags & INO_FLAGS_XATTR_CHECKED)) + return 0; + down_write(&c->xattr_sem); + retry: + rc = 0; + for (ref=ic->xref, pref=&ic->xref; ref; pref=&ref->next, ref=ref->next) { + if (!ref->xd->xname) { + rc = load_xattr_datum(c, ref->xd); + if (unlikely(rc > 0)) { + *pref = ref->next; + delete_xattr_ref(c, ref); + goto retry; + } else if (unlikely(rc < 0)) + goto out; + } + for (cmp=ref->next, pref=&ref->next; cmp; pref=&cmp->next, cmp=cmp->next) { + if (!cmp->xd->xname) { + ref->xd->flags |= JFFS2_XFLAGS_BIND; + rc = load_xattr_datum(c, cmp->xd); + ref->xd->flags &= ~JFFS2_XFLAGS_BIND; + if (unlikely(rc > 0)) { + *pref = cmp->next; + delete_xattr_ref(c, cmp); + goto retry; + } else if (unlikely(rc < 0)) + goto out; + } + if (ref->xd->xprefix == cmp->xd->xprefix + && !strcmp(ref->xd->xname, cmp->xd->xname)) { + *pref = cmp->next; + delete_xattr_ref(c, cmp); + goto retry; + } + } + } + ic->flags |= INO_FLAGS_XATTR_CHECKED; + out: + up_write(&c->xattr_sem); + + return rc; +} + +/* -------- xattr subsystem functions --------------- + * jffs2_init_xattr_subsystem(c) + * is used to initialize semaphore and list_head, and some variables. + * jffs2_find_xattr_datum(c, xid) + * is used to lookup xdatum while scanning process. + * jffs2_clear_xattr_subsystem(c) + * is used to release any xattr related objects. + * jffs2_build_xattr_subsystem(c) + * is used to associate xdatum and xref while super block building process. + * jffs2_setup_xattr_datum(c, xid, version) + * is used to insert xdatum while scanning process. + * -------------------------------------------------- */ +void jffs2_init_xattr_subsystem(struct jffs2_sb_info *c) +{ + int i; + + for (i=0; i < XATTRINDEX_HASHSIZE; i++) + INIT_LIST_HEAD(&c->xattrindex[i]); + INIT_LIST_HEAD(&c->xattr_unchecked); + c->xref_temp = NULL; + + init_rwsem(&c->xattr_sem); + c->xdatum_mem_usage = 0; + c->xdatum_mem_threshold = 32 * 1024; /* Default 32KB */ +} + +static struct jffs2_xattr_datum *jffs2_find_xattr_datum(struct jffs2_sb_info *c, uint32_t xid) +{ + struct jffs2_xattr_datum *xd; + int i = xid % XATTRINDEX_HASHSIZE; + + /* It's only used in scanning/building process. */ + BUG_ON(!(c->flags & (JFFS2_SB_FLAG_SCANNING|JFFS2_SB_FLAG_BUILDING))); + + list_for_each_entry(xd, &c->xattrindex[i], xindex) { + if (xd->xid==xid) + return xd; + } + return NULL; +} + +void jffs2_clear_xattr_subsystem(struct jffs2_sb_info *c) +{ + struct jffs2_xattr_datum *xd, *_xd; + struct jffs2_xattr_ref *ref, *_ref; + int i; + + for (ref=c->xref_temp; ref; ref = _ref) { + _ref = ref->next; + jffs2_free_xattr_ref(ref); + } + c->xref_temp = NULL; + + for (i=0; i < XATTRINDEX_HASHSIZE; i++) { + list_for_each_entry_safe(xd, _xd, &c->xattrindex[i], xindex) { + list_del(&xd->xindex); + if (xd->xname) + kfree(xd->xname); + jffs2_free_xattr_datum(xd); + } + } +} + +void jffs2_build_xattr_subsystem(struct jffs2_sb_info *c) +{ + struct jffs2_xattr_ref *ref, *_ref; + struct jffs2_xattr_datum *xd, *_xd; + struct jffs2_inode_cache *ic; + int i, xdatum_count =0, xdatum_unchecked_count = 0, xref_count = 0; + + BUG_ON(!(c->flags & JFFS2_SB_FLAG_BUILDING)); + + /* Phase.1 */ + for (ref=c->xref_temp; ref; ref=_ref) { + _ref = ref->next; + /* checking REF_UNCHECKED nodes */ + if (ref_flags(ref->node) != REF_PRISTINE) { + if (verify_xattr_ref(c, ref)) { + delete_xattr_ref_node(c, ref); + jffs2_free_xattr_ref(ref); + continue; + } + } + /* At this point, ref->xid and ref->ino contain XID and inode number. + ref->xd and ref->ic are not valid yet. */ + xd = jffs2_find_xattr_datum(c, ref->xid); + ic = jffs2_get_ino_cache(c, ref->ino); + if (!xd || !ic) { + if (ref_flags(ref->node) != REF_UNCHECKED) + JFFS2_WARNING("xref(ino=%u, xid=%u) is orphan. \n", + ref->ino, ref->xid); + delete_xattr_ref_node(c, ref); + jffs2_free_xattr_ref(ref); + continue; + } + ref->xd = xd; + ref->ic = ic; + xd->refcnt++; + ref->next = ic->xref; + ic->xref = ref; + xref_count++; + } + c->xref_temp = NULL; + /* After this, ref->xid/ino are NEVER used. */ + + /* Phase.2 */ + for (i=0; i < XATTRINDEX_HASHSIZE; i++) { + list_for_each_entry_safe(xd, _xd, &c->xattrindex[i], xindex) { + list_del_init(&xd->xindex); + if (!xd->refcnt) { + if (ref_flags(xd->node) != REF_UNCHECKED) + JFFS2_WARNING("orphan xdatum(xid=%u, version=%u) at %#08x\n", + xd->xid, xd->version, ref_offset(xd->node)); + delete_xattr_datum(c, xd); + continue; + } + if (ref_flags(xd->node) != REF_PRISTINE) { + dbg_xattr("unchecked xdatum(xid=%u) at %#08x\n", + xd->xid, ref_offset(xd->node)); + list_add(&xd->xindex, &c->xattr_unchecked); + xdatum_unchecked_count++; + } + xdatum_count++; + } + } + /* build complete */ + JFFS2_NOTICE("complete building xattr subsystem, %u of xdatum (%u unchecked) and " + "%u of xref found.\n", xdatum_count, xdatum_unchecked_count, xref_count); +} + +struct jffs2_xattr_datum *jffs2_setup_xattr_datum(struct jffs2_sb_info *c, + uint32_t xid, uint32_t version) +{ + struct jffs2_xattr_datum *xd, *_xd; + + _xd = jffs2_find_xattr_datum(c, xid); + if (_xd) { + dbg_xattr("duplicate xdatum (xid=%u, version=%u/%u) at %#08x\n", + xid, version, _xd->version, ref_offset(_xd->node)); + if (version < _xd->version) + return ERR_PTR(-EEXIST); + } + xd = jffs2_alloc_xattr_datum(); + if (!xd) + return ERR_PTR(-ENOMEM); + xd->xid = xid; + xd->version = version; + if (xd->xid > c->highest_xid) + c->highest_xid = xd->xid; + list_add_tail(&xd->xindex, &c->xattrindex[xid % XATTRINDEX_HASHSIZE]); + + if (_xd) { + list_del_init(&_xd->xindex); + delete_xattr_datum_node(c, _xd); + jffs2_free_xattr_datum(_xd); + } + return xd; +} + +/* -------- xattr subsystem functions --------------- + * xprefix_to_handler(xprefix) + * is used to translate xprefix into xattr_handler. + * jffs2_listxattr(dentry, buffer, size) + * is an implementation of listxattr handler on jffs2. + * do_jffs2_getxattr(inode, xprefix, xname, buffer, size) + * is an implementation of getxattr handler on jffs2. + * do_jffs2_setxattr(inode, xprefix, xname, buffer, size, flags) + * is an implementation of setxattr handler on jffs2. + * -------------------------------------------------- */ +struct xattr_handler *jffs2_xattr_handlers[] = { + &jffs2_user_xattr_handler, +#ifdef CONFIG_JFFS2_FS_SECURITY + &jffs2_security_xattr_handler, +#endif +#ifdef CONFIG_JFFS2_FS_POSIX_ACL + &jffs2_acl_access_xattr_handler, + &jffs2_acl_default_xattr_handler, +#endif + &jffs2_trusted_xattr_handler, + NULL +}; + +static struct xattr_handler *xprefix_to_handler(int xprefix) { + struct xattr_handler *ret; + + switch (xprefix) { + case JFFS2_XPREFIX_USER: + ret = &jffs2_user_xattr_handler; + break; +#ifdef CONFIG_JFFS2_FS_SECURITY + case JFFS2_XPREFIX_SECURITY: + ret = &jffs2_security_xattr_handler; + break; +#endif +#ifdef CONFIG_JFFS2_FS_POSIX_ACL + case JFFS2_XPREFIX_ACL_ACCESS: + ret = &jffs2_acl_access_xattr_handler; + break; + case JFFS2_XPREFIX_ACL_DEFAULT: + ret = &jffs2_acl_default_xattr_handler; + break; +#endif + case JFFS2_XPREFIX_TRUSTED: + ret = &jffs2_trusted_xattr_handler; + break; + default: + ret = NULL; + break; + } + return ret; +} + +ssize_t jffs2_listxattr(struct dentry *dentry, char *buffer, size_t size) +{ + struct inode *inode = dentry->d_inode; + struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode); + struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb); + struct jffs2_inode_cache *ic = f->inocache; + struct jffs2_xattr_ref *ref, **pref; + struct jffs2_xattr_datum *xd; + struct xattr_handler *xhandle; + ssize_t len, rc; + int retry = 0; + + rc = check_xattr_ref_inode(c, ic); + if (unlikely(rc)) + return rc; + + down_read(&c->xattr_sem); + retry: + len = 0; + for (ref=ic->xref, pref=&ic->xref; ref; pref=&ref->next, ref=ref->next) { + BUG_ON(ref->ic != ic); + xd = ref->xd; + if (!xd->xname) { + /* xdatum is unchached */ + if (!retry) { + retry = 1; + up_read(&c->xattr_sem); + down_write(&c->xattr_sem); + goto retry; + } else { + rc = load_xattr_datum(c, xd); + if (unlikely(rc > 0)) { + *pref = ref->next; + delete_xattr_ref(c, ref); + goto retry; + } else if (unlikely(rc < 0)) + goto out; + } + } + xhandle = xprefix_to_handler(xd->xprefix); + if (!xhandle) + continue; + if (buffer) { + rc = xhandle->list(inode, buffer+len, size-len, xd->xname, xd->name_len); + } else { + rc = xhandle->list(inode, NULL, 0, xd->xname, xd->name_len); + } + if (rc < 0) + goto out; + len += rc; + } + rc = len; + out: + if (!retry) { + up_read(&c->xattr_sem); + } else { + up_write(&c->xattr_sem); + } + return rc; +} + +int do_jffs2_getxattr(struct inode *inode, int xprefix, const char *xname, + char *buffer, size_t size) +{ + struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode); + struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb); + struct jffs2_inode_cache *ic = f->inocache; + struct jffs2_xattr_datum *xd; + struct jffs2_xattr_ref *ref, **pref; + int rc, retry = 0; + + rc = check_xattr_ref_inode(c, ic); + if (unlikely(rc)) + return rc; + + down_read(&c->xattr_sem); + retry: + for (ref=ic->xref, pref=&ic->xref; ref; pref=&ref->next, ref=ref->next) { + BUG_ON(ref->ic!=ic); + + xd = ref->xd; + if (xd->xprefix != xprefix) + continue; + if (!xd->xname) { + /* xdatum is unchached */ + if (!retry) { + retry = 1; + up_read(&c->xattr_sem); + down_write(&c->xattr_sem); + goto retry; + } else { + rc = load_xattr_datum(c, xd); + if (unlikely(rc > 0)) { + *pref = ref->next; + delete_xattr_ref(c, ref); + goto retry; + } else if (unlikely(rc < 0)) { + goto out; + } + } + } + if (!strcmp(xname, xd->xname)) { + rc = xd->value_len; + if (buffer) { + if (size < rc) { + rc = -ERANGE; + } else { + memcpy(buffer, xd->xvalue, rc); + } + } + goto out; + } + } + rc = -ENODATA; + out: + if (!retry) { + up_read(&c->xattr_sem); + } else { + up_write(&c->xattr_sem); + } + return rc; +} + +int do_jffs2_setxattr(struct inode *inode, int xprefix, const char *xname, + const char *buffer, size_t size, int flags) +{ + struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode); + struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb); + struct jffs2_inode_cache *ic = f->inocache; + struct jffs2_xattr_datum *xd; + struct jffs2_xattr_ref *ref, *newref, **pref; + uint32_t length, request; + int rc; + + rc = check_xattr_ref_inode(c, ic); + if (unlikely(rc)) + return rc; + + request = PAD(sizeof(struct jffs2_raw_xattr) + strlen(xname) + 1 + size); + rc = jffs2_reserve_space(c, request, &length, + ALLOC_NORMAL, JFFS2_SUMMARY_XATTR_SIZE); + if (rc) { + JFFS2_WARNING("jffs2_reserve_space()=%d, request=%u\n", rc, request); + return rc; + } + + /* Find existing xattr */ + down_write(&c->xattr_sem); + retry: + for (ref=ic->xref, pref=&ic->xref; ref; pref=&ref->next, ref=ref->next) { + xd = ref->xd; + if (xd->xprefix != xprefix) + continue; + if (!xd->xname) { + rc = load_xattr_datum(c, xd); + if (unlikely(rc > 0)) { + *pref = ref->next; + delete_xattr_ref(c, ref); + goto retry; + } else if (unlikely(rc < 0)) + goto out; + } + if (!strcmp(xd->xname, xname)) { + if (flags & XATTR_CREATE) { + rc = -EEXIST; + goto out; + } + if (!buffer) { + *pref = ref->next; + delete_xattr_ref(c, ref); + rc = 0; + goto out; + } + goto found; + } + } + /* not found */ + if (flags & XATTR_REPLACE) { + rc = -ENODATA; + goto out; + } + if (!buffer) { + rc = -EINVAL; + goto out; + } + found: + xd = create_xattr_datum(c, xprefix, xname, buffer, size); + if (IS_ERR(xd)) { + rc = PTR_ERR(xd); + goto out; + } + up_write(&c->xattr_sem); + jffs2_complete_reservation(c); + + /* create xattr_ref */ + request = PAD(sizeof(struct jffs2_raw_xref)); + rc = jffs2_reserve_space(c, request, &length, + ALLOC_NORMAL, JFFS2_SUMMARY_XREF_SIZE); + if (rc) { + JFFS2_WARNING("jffs2_reserve_space()=%d, request=%u\n", rc, request); + down_write(&c->xattr_sem); + xd->refcnt--; + if (!xd->refcnt) + delete_xattr_datum(c, xd); + up_write(&c->xattr_sem); + return rc; + } + down_write(&c->xattr_sem); + if (ref) + *pref = ref->next; + newref = create_xattr_ref(c, ic, xd); + if (IS_ERR(newref)) { + if (ref) { + ref->next = ic->xref; + ic->xref = ref; + } + rc = PTR_ERR(newref); + xd->refcnt--; + if (!xd->refcnt) + delete_xattr_datum(c, xd); + } else if (ref) { + delete_xattr_ref(c, ref); + } + out: + up_write(&c->xattr_sem); + jffs2_complete_reservation(c); + return rc; +} + +/* -------- garbage collector functions ------------- + * jffs2_garbage_collect_xattr_datum(c, xd) + * is used to move xdatum into new node. + * jffs2_garbage_collect_xattr_ref(c, ref) + * is used to move xref into new node. + * jffs2_verify_xattr(c) + * is used to call do_verify_xattr_datum() before garbage collecting. + * -------------------------------------------------- */ +int jffs2_garbage_collect_xattr_datum(struct jffs2_sb_info *c, struct jffs2_xattr_datum *xd) +{ + uint32_t totlen, length, old_ofs; + int rc = -EINVAL; + + down_write(&c->xattr_sem); + BUG_ON(!xd->node); + + old_ofs = ref_offset(xd->node); + totlen = ref_totlen(c, c->gcblock, xd->node); + if (totlen < sizeof(struct jffs2_raw_xattr)) + goto out; + + if (!xd->xname) { + rc = load_xattr_datum(c, xd); + if (unlikely(rc > 0)) { + delete_xattr_datum_node(c, xd); + rc = 0; + goto out; + } else if (unlikely(rc < 0)) + goto out; + } + rc = jffs2_reserve_space_gc(c, totlen, &length, JFFS2_SUMMARY_XATTR_SIZE); + if (rc || length < totlen) { + JFFS2_WARNING("jffs2_reserve_space()=%d, request=%u\n", rc, totlen); + rc = rc ? rc : -EBADFD; + goto out; + } + rc = save_xattr_datum(c, xd); + if (!rc) + dbg_xattr("xdatum (xid=%u, version=%u) GC'ed from %#08x to %08x\n", + xd->xid, xd->version, old_ofs, ref_offset(xd->node)); + out: + up_write(&c->xattr_sem); + return rc; +} + + +int jffs2_garbage_collect_xattr_ref(struct jffs2_sb_info *c, struct jffs2_xattr_ref *ref) +{ + uint32_t totlen, length, old_ofs; + int rc = -EINVAL; + + down_write(&c->xattr_sem); + BUG_ON(!ref->node); + + old_ofs = ref_offset(ref->node); + totlen = ref_totlen(c, c->gcblock, ref->node); + if (totlen != sizeof(struct jffs2_raw_xref)) + goto out; + + rc = jffs2_reserve_space_gc(c, totlen, &length, JFFS2_SUMMARY_XREF_SIZE); + if (rc || length < totlen) { + JFFS2_WARNING("%s: jffs2_reserve_space() = %d, request = %u\n", + __FUNCTION__, rc, totlen); + rc = rc ? rc : -EBADFD; + goto out; + } + rc = save_xattr_ref(c, ref); + if (!rc) + dbg_xattr("xref (ino=%u, xid=%u) GC'ed from %#08x to %08x\n", + ref->ic->ino, ref->xd->xid, old_ofs, ref_offset(ref->node)); + out: + up_write(&c->xattr_sem); + return rc; +} + +int jffs2_verify_xattr(struct jffs2_sb_info *c) +{ + struct jffs2_xattr_datum *xd, *_xd; + int rc; + + down_write(&c->xattr_sem); + list_for_each_entry_safe(xd, _xd, &c->xattr_unchecked, xindex) { + rc = do_verify_xattr_datum(c, xd); + if (rc == 0) { + list_del_init(&xd->xindex); + break; + } else if (rc > 0) { + list_del_init(&xd->xindex); + delete_xattr_datum_node(c, xd); + } + } + up_write(&c->xattr_sem); + + return list_empty(&c->xattr_unchecked) ? 1 : 0; +} diff -puN /dev/null fs/jffs2/xattr.h --- /dev/null 2006-05-29 10:18:53.280907750 -0700 +++ devel-akpm/fs/jffs2/xattr.h 2006-05-29 15:02:34.000000000 -0700 @@ -0,0 +1,116 @@ +/* + * JFFS2 -- Journalling Flash File System, Version 2. + * + * Copyright (C) 2006 NEC Corporation + * + * Created by KaiGai Kohei + * + * For licensing information, see the file 'LICENCE' in this directory. + * + */ +#ifndef _JFFS2_FS_XATTR_H_ +#define _JFFS2_FS_XATTR_H_ + +#include +#include + +#define JFFS2_XFLAGS_HOT (0x01) /* This datum is HOT */ +#define JFFS2_XFLAGS_BIND (0x02) /* This datum is not reclaimed */ + +struct jffs2_xattr_datum +{ + void *always_null; + struct jffs2_raw_node_ref *node; + uint8_t class; + uint8_t flags; + uint16_t xprefix; /* see JFFS2_XATTR_PREFIX_* */ + + struct list_head xindex; /* chained from c->xattrindex[n] */ + uint32_t refcnt; /* # of xattr_ref refers this */ + uint32_t xid; + uint32_t version; + + uint32_t data_crc; + uint32_t hashkey; + char *xname; /* XATTR name without prefix */ + uint32_t name_len; /* length of xname */ + char *xvalue; /* XATTR value */ + uint32_t value_len; /* length of xvalue */ +}; + +struct jffs2_inode_cache; +struct jffs2_xattr_ref +{ + void *always_null; + struct jffs2_raw_node_ref *node; + uint8_t class; + uint8_t flags; /* Currently unused */ + u16 unused; + + union { + struct jffs2_inode_cache *ic; /* reference to jffs2_inode_cache */ + uint32_t ino; /* only used in scanning/building */ + }; + union { + struct jffs2_xattr_datum *xd; /* reference to jffs2_xattr_datum */ + uint32_t xid; /* only used in sccanning/building */ + }; + struct jffs2_xattr_ref *next; /* chained from ic->xref_list */ +}; + +#ifdef CONFIG_JFFS2_FS_XATTR + +extern void jffs2_init_xattr_subsystem(struct jffs2_sb_info *c); +extern void jffs2_build_xattr_subsystem(struct jffs2_sb_info *c); +extern void jffs2_clear_xattr_subsystem(struct jffs2_sb_info *c); + +extern struct jffs2_xattr_datum *jffs2_setup_xattr_datum(struct jffs2_sb_info *c, + uint32_t xid, uint32_t version); + +extern void jffs2_xattr_delete_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic); +extern void jffs2_xattr_free_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic); + +extern int jffs2_garbage_collect_xattr_datum(struct jffs2_sb_info *c, struct jffs2_xattr_datum *xd); +extern int jffs2_garbage_collect_xattr_ref(struct jffs2_sb_info *c, struct jffs2_xattr_ref *ref); +extern int jffs2_verify_xattr(struct jffs2_sb_info *c); + +extern int do_jffs2_getxattr(struct inode *inode, int xprefix, const char *xname, + char *buffer, size_t size); +extern int do_jffs2_setxattr(struct inode *inode, int xprefix, const char *xname, + const char *buffer, size_t size, int flags); + +extern struct xattr_handler *jffs2_xattr_handlers[]; +extern struct xattr_handler jffs2_user_xattr_handler; +extern struct xattr_handler jffs2_trusted_xattr_handler; + +extern ssize_t jffs2_listxattr(struct dentry *, char *, size_t); +#define jffs2_getxattr generic_getxattr +#define jffs2_setxattr generic_setxattr +#define jffs2_removexattr generic_removexattr + +#else + +#define jffs2_init_xattr_subsystem(c) +#define jffs2_build_xattr_subsystem(c) +#define jffs2_clear_xattr_subsystem(c) + +#define jffs2_xattr_delete_inode(c, ic) +#define jffs2_xattr_free_inode(c, ic) +#define jffs2_verify_xattr(c) (1) + +#define jffs2_xattr_handlers NULL +#define jffs2_listxattr NULL +#define jffs2_getxattr NULL +#define jffs2_setxattr NULL +#define jffs2_removexattr NULL + +#endif /* CONFIG_JFFS2_FS_XATTR */ + +#ifdef CONFIG_JFFS2_FS_SECURITY +extern int jffs2_init_security(struct inode *inode, struct inode *dir); +extern struct xattr_handler jffs2_security_xattr_handler; +#else +#define jffs2_init_security(inode,dir) (0) +#endif /* CONFIG_JFFS2_FS_SECURITY */ + +#endif /* _JFFS2_FS_XATTR_H_ */ diff -puN /dev/null fs/jffs2/xattr_trusted.c --- /dev/null 2006-05-29 10:18:53.280907750 -0700 +++ devel-akpm/fs/jffs2/xattr_trusted.c 2006-05-29 15:02:34.000000000 -0700 @@ -0,0 +1,52 @@ +/* + * JFFS2 -- Journalling Flash File System, Version 2. + * + * Copyright (C) 2006 NEC Corporation + * + * Created by KaiGai Kohei + * + * For licensing information, see the file 'LICENCE' in this directory. + * + */ +#include +#include +#include +#include +#include +#include "nodelist.h" + +static int jffs2_trusted_getxattr(struct inode *inode, const char *name, + void *buffer, size_t size) +{ + if (!strcmp(name, "")) + return -EINVAL; + return do_jffs2_getxattr(inode, JFFS2_XPREFIX_TRUSTED, name, buffer, size); +} + +static int jffs2_trusted_setxattr(struct inode *inode, const char *name, const void *buffer, + size_t size, int flags) +{ + if (!strcmp(name, "")) + return -EINVAL; + return do_jffs2_setxattr(inode, JFFS2_XPREFIX_TRUSTED, name, buffer, size, flags); +} + +static size_t jffs2_trusted_listxattr(struct inode *inode, char *list, size_t list_size, + const char *name, size_t name_len) +{ + size_t retlen = XATTR_TRUSTED_PREFIX_LEN + name_len + 1; + + if (list && retlen<=list_size) { + strcpy(list, XATTR_TRUSTED_PREFIX); + strcpy(list + XATTR_TRUSTED_PREFIX_LEN, name); + } + + return retlen; +} + +struct xattr_handler jffs2_trusted_xattr_handler = { + .prefix = XATTR_TRUSTED_PREFIX, + .list = jffs2_trusted_listxattr, + .set = jffs2_trusted_setxattr, + .get = jffs2_trusted_getxattr +}; diff -puN /dev/null fs/jffs2/xattr_user.c --- /dev/null 2006-05-29 10:18:53.280907750 -0700 +++ devel-akpm/fs/jffs2/xattr_user.c 2006-05-29 15:02:34.000000000 -0700 @@ -0,0 +1,52 @@ +/* + * JFFS2 -- Journalling Flash File System, Version 2. + * + * Copyright (C) 2006 NEC Corporation + * + * Created by KaiGai Kohei + * + * For licensing information, see the file 'LICENCE' in this directory. + * + */ +#include +#include +#include +#include +#include +#include "nodelist.h" + +static int jffs2_user_getxattr(struct inode *inode, const char *name, + void *buffer, size_t size) +{ + if (!strcmp(name, "")) + return -EINVAL; + return do_jffs2_getxattr(inode, JFFS2_XPREFIX_USER, name, buffer, size); +} + +static int jffs2_user_setxattr(struct inode *inode, const char *name, const void *buffer, + size_t size, int flags) +{ + if (!strcmp(name, "")) + return -EINVAL; + return do_jffs2_setxattr(inode, JFFS2_XPREFIX_USER, name, buffer, size, flags); +} + +static size_t jffs2_user_listxattr(struct inode *inode, char *list, size_t list_size, + const char *name, size_t name_len) +{ + size_t retlen = XATTR_USER_PREFIX_LEN + name_len + 1; + + if (list && retlen <= list_size) { + strcpy(list, XATTR_USER_PREFIX); + strcpy(list + XATTR_USER_PREFIX_LEN, name); + } + + return retlen; +} + +struct xattr_handler jffs2_user_xattr_handler = { + .prefix = XATTR_USER_PREFIX, + .list = jffs2_user_listxattr, + .set = jffs2_user_setxattr, + .get = jffs2_user_getxattr +}; diff -puN fs/jffs/intrep.c~git-mtd fs/jffs/intrep.c --- devel/fs/jffs/intrep.c~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/jffs/intrep.c 2006-05-29 15:02:34.000000000 -0700 @@ -247,7 +247,7 @@ flash_safe_read(struct mtd_info *mtd, lo D3(printk(KERN_NOTICE "flash_safe_read(%p, %08x, %p, %08x)\n", mtd, (unsigned int) from, buf, count)); - res = MTD_READ(mtd, from, count, &retlen, buf); + res = mtd->read(mtd, from, count, &retlen, buf); if (retlen != count) { panic("Didn't read all bytes in flash_safe_read(). Returned %d\n", res); } @@ -262,7 +262,7 @@ flash_read_u32(struct mtd_info *mtd, lof __u32 ret; int res; - res = MTD_READ(mtd, from, 4, &retlen, (unsigned char *)&ret); + res = mtd->read(mtd, from, 4, &retlen, (unsigned char *)&ret); if (retlen != 4) { printk("Didn't read all bytes in flash_read_u32(). Returned %d\n", res); return 0; @@ -282,7 +282,7 @@ flash_safe_write(struct mtd_info *mtd, l D3(printk(KERN_NOTICE "flash_safe_write(%p, %08x, %p, %08x)\n", mtd, (unsigned int) to, buf, count)); - res = MTD_WRITE(mtd, to, count, &retlen, buf); + res = mtd->write(mtd, to, count, &retlen, buf); if (retlen != count) { printk("Didn't write all bytes in flash_safe_write(). Returned %d\n", res); } @@ -300,9 +300,9 @@ flash_safe_writev(struct mtd_info *mtd, D3(printk(KERN_NOTICE "flash_safe_writev(%p, %08x, %p)\n", mtd, (unsigned int) to, vecs)); - + if (mtd->writev) { - res = MTD_WRITEV(mtd, vecs, iovec_cnt, to, &retlen); + res = mtd->writev(mtd, vecs, iovec_cnt, to, &retlen); return res ? res : retlen; } /* Not implemented writev. Repeatedly use write - on the not so @@ -312,7 +312,8 @@ flash_safe_writev(struct mtd_info *mtd, retlen=0; for (i=0; !res && iwrite(mtd, to, vecs[i].iov_len, &retlen_a, + vecs[i].iov_base); if (retlen_a != vecs[i].iov_len) { printk("Didn't write all bytes in flash_safe_writev(). Returned %d\n", res); if (i != iovec_cnt-1) @@ -393,7 +394,7 @@ flash_erase_region(struct mtd_info *mtd, set_current_state(TASK_UNINTERRUPTIBLE); add_wait_queue(&wait_q, &wait); - if (MTD_ERASE(mtd, erase) < 0) { + if (mtd->erase(mtd, erase) < 0) { set_current_state(TASK_RUNNING); remove_wait_queue(&wait_q, &wait); kfree(erase); diff -puN fs/Kconfig~git-mtd fs/Kconfig --- devel/fs/Kconfig~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/fs/Kconfig 2006-05-29 15:02:34.000000000 -0700 @@ -1076,6 +1076,44 @@ config JFFS2_FS_DEBUG If reporting bugs, please try to have available a full dump of the messages at debug level 1 while the misbehaviour was occurring. +config JFFS2_FS_XATTR + bool "JFFS2 XATTR support" + depends on JFFS2_FS + default n + help + Extended attributes are name:value pairs associated with inodes by + the kernel or by users (see the attr(5) manual page, or visit + for details). + + If unsure, say N. + +config JFFS2_FS_POSIX_ACL + bool "JFFS2 POSIX Access Control Lists" + depends on JFFS2_FS_XATTR + default y + select FS_POSIX_ACL + help + Posix Access Control Lists (ACLs) support permissions for users and + groups beyond the owner/group/world scheme. + + To learn more about Access Control Lists, visit the Posix ACLs for + Linux website . + + If you don't know what Access Control Lists are, say N + +config JFFS2_FS_SECURITY + bool "JFFS2 Security Labels" + depends on JFFS2_FS_XATTR + default y + help + Security labels support alternative access control models + implemented by security modules like SELinux. This option + enables an extended attribute handler for file security + labels in the jffs2 filesystem. + + If you are not using a security module that requires using + extended attributes for file security labels, say N. + config JFFS2_FS_WRITEBUFFER bool "JFFS2 write-buffering support" depends on JFFS2_FS diff -L include/linux/jffs2_fs_i.h -puN include/linux/jffs2_fs_i.h~git-mtd /dev/null --- devel/include/linux/jffs2_fs_i.h +++ /dev/null 2006-05-29 10:18:53.280907750 -0700 @@ -1,50 +0,0 @@ -/* $Id: jffs2_fs_i.h,v 1.19 2005/11/07 11:14:52 gleixner Exp $ */ - -#ifndef _JFFS2_FS_I -#define _JFFS2_FS_I - -#include -#include -#include - -struct jffs2_inode_info { - /* We need an internal mutex similar to inode->i_mutex. - Unfortunately, we can't used the existing one, because - either the GC would deadlock, or we'd have to release it - before letting GC proceed. Or we'd have to put ugliness - into the GC code so it didn't attempt to obtain the i_mutex - for the inode(s) which are already locked */ - struct semaphore sem; - - /* The highest (datanode) version number used for this ino */ - uint32_t highest_version; - - /* List of data fragments which make up the file */ - struct rb_root fragtree; - - /* There may be one datanode which isn't referenced by any of the - above fragments, if it contains a metadata update but no actual - data - or if this is a directory inode */ - /* This also holds the _only_ dnode for symlinks/device nodes, - etc. */ - struct jffs2_full_dnode *metadata; - - /* Directory entries */ - struct jffs2_full_dirent *dents; - - /* The target path if this is the inode of a symlink */ - unsigned char *target; - - /* Some stuff we just have to keep in-core at all times, for each inode. */ - struct jffs2_inode_cache *inocache; - - uint16_t flags; - uint8_t usercompr; -#if !defined (__ECOS) -#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,2) - struct inode vfs_inode; -#endif -#endif -}; - -#endif /* _JFFS2_FS_I */ diff -L include/linux/jffs2_fs_sb.h -puN include/linux/jffs2_fs_sb.h~git-mtd /dev/null --- devel/include/linux/jffs2_fs_sb.h +++ /dev/null 2006-05-29 10:18:53.280907750 -0700 @@ -1,122 +0,0 @@ -/* $Id: jffs2_fs_sb.h,v 1.54 2005/09/21 13:37:34 dedekind Exp $ */ - -#ifndef _JFFS2_FS_SB -#define _JFFS2_FS_SB - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define JFFS2_SB_FLAG_RO 1 -#define JFFS2_SB_FLAG_SCANNING 2 /* Flash scanning is in progress */ -#define JFFS2_SB_FLAG_BUILDING 4 /* File system building is in progress */ - -struct jffs2_inodirty; - -/* A struct for the overall file system control. Pointers to - jffs2_sb_info structs are named `c' in the source code. - Nee jffs_control -*/ -struct jffs2_sb_info { - struct mtd_info *mtd; - - uint32_t highest_ino; - uint32_t checked_ino; - - unsigned int flags; - - struct task_struct *gc_task; /* GC task struct */ - struct completion gc_thread_start; /* GC thread start completion */ - struct completion gc_thread_exit; /* GC thread exit completion port */ - - struct semaphore alloc_sem; /* Used to protect all the following - fields, and also to protect against - out-of-order writing of nodes. And GC. */ - uint32_t cleanmarker_size; /* Size of an _inline_ CLEANMARKER - (i.e. zero for OOB CLEANMARKER */ - - uint32_t flash_size; - uint32_t used_size; - uint32_t dirty_size; - uint32_t wasted_size; - uint32_t free_size; - uint32_t erasing_size; - uint32_t bad_size; - uint32_t sector_size; - uint32_t unchecked_size; - - uint32_t nr_free_blocks; - uint32_t nr_erasing_blocks; - - /* Number of free blocks there must be before we... */ - uint8_t resv_blocks_write; /* ... allow a normal filesystem write */ - uint8_t resv_blocks_deletion; /* ... allow a normal filesystem deletion */ - uint8_t resv_blocks_gctrigger; /* ... wake up the GC thread */ - uint8_t resv_blocks_gcbad; /* ... pick a block from the bad_list to GC */ - uint8_t resv_blocks_gcmerge; /* ... merge pages when garbage collecting */ - - uint32_t nospc_dirty_size; - - uint32_t nr_blocks; - struct jffs2_eraseblock *blocks; /* The whole array of blocks. Used for getting blocks - * from the offset (blocks[ofs / sector_size]) */ - struct jffs2_eraseblock *nextblock; /* The block we're currently filling */ - - struct jffs2_eraseblock *gcblock; /* The block we're currently garbage-collecting */ - - struct list_head clean_list; /* Blocks 100% full of clean data */ - struct list_head very_dirty_list; /* Blocks with lots of dirty space */ - struct list_head dirty_list; /* Blocks with some dirty space */ - struct list_head erasable_list; /* Blocks which are completely dirty, and need erasing */ - struct list_head erasable_pending_wbuf_list; /* Blocks which need erasing but only after the current wbuf is flushed */ - struct list_head erasing_list; /* Blocks which are currently erasing */ - struct list_head erase_pending_list; /* Blocks which need erasing now */ - struct list_head erase_complete_list; /* Blocks which are erased and need the clean marker written to them */ - struct list_head free_list; /* Blocks which are free and ready to be used */ - struct list_head bad_list; /* Bad blocks. */ - struct list_head bad_used_list; /* Bad blocks with valid data in. */ - - spinlock_t erase_completion_lock; /* Protect free_list and erasing_list - against erase completion handler */ - wait_queue_head_t erase_wait; /* For waiting for erases to complete */ - - wait_queue_head_t inocache_wq; - struct jffs2_inode_cache **inocache_list; - spinlock_t inocache_lock; - - /* Sem to allow jffs2_garbage_collect_deletion_dirent to - drop the erase_completion_lock while it's holding a pointer - to an obsoleted node. I don't like this. Alternatives welcomed. */ - struct semaphore erase_free_sem; - - uint32_t wbuf_pagesize; /* 0 for NOR and other flashes with no wbuf */ - -#ifdef CONFIG_JFFS2_FS_WRITEBUFFER - /* Write-behind buffer for NAND flash */ - unsigned char *wbuf; - uint32_t wbuf_ofs; - uint32_t wbuf_len; - struct jffs2_inodirty *wbuf_inodes; - - struct rw_semaphore wbuf_sem; /* Protects the write buffer */ - - /* Information about out-of-band area usage... */ - struct nand_oobinfo *oobinfo; - uint32_t badblock_pos; - uint32_t fsdata_pos; - uint32_t fsdata_len; -#endif - - struct jffs2_summary *summary; /* Summary information */ - - /* OS-private pointer for getting back to master superblock info */ - void *os_priv; -}; - -#endif /* _JFFS2_FB_SB */ diff -puN include/linux/jffs2.h~git-mtd include/linux/jffs2.h --- devel/include/linux/jffs2.h~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/include/linux/jffs2.h 2006-05-29 15:02:34.000000000 -0700 @@ -65,6 +65,18 @@ #define JFFS2_NODETYPE_SUMMARY (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 6) +#define JFFS2_NODETYPE_XATTR (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 8) +#define JFFS2_NODETYPE_XREF (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 9) + +/* XATTR Related */ +#define JFFS2_XPREFIX_USER 1 /* for "user." */ +#define JFFS2_XPREFIX_SECURITY 2 /* for "security." */ +#define JFFS2_XPREFIX_ACL_ACCESS 3 /* for "system.posix_acl_access" */ +#define JFFS2_XPREFIX_ACL_DEFAULT 4 /* for "system.posix_acl_default" */ +#define JFFS2_XPREFIX_TRUSTED 5 /* for "trusted.*" */ + +#define JFFS2_ACL_VERSION 0x0001 + // Maybe later... //#define JFFS2_NODETYPE_CHECKPOINT (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 3) //#define JFFS2_NODETYPE_OPTIONS (JFFS2_FEATURE_RWCOMPAT_COPY | JFFS2_NODE_ACCURATE | 4) @@ -82,11 +94,11 @@ typedef struct { uint32_t v32; -} __attribute__((packed)) jint32_t; +} __attribute__((packed)) jint32_t; typedef struct { uint32_t m; -} __attribute__((packed)) jmode_t; +} __attribute__((packed)) jmode_t; typedef struct { uint16_t v16; @@ -99,7 +111,7 @@ struct jffs2_unknown_node jint16_t nodetype; jint32_t totlen; /* So we can skip over nodes we don't grok */ jint32_t hdr_crc; -} __attribute__((packed)); +}; struct jffs2_raw_dirent { @@ -117,7 +129,7 @@ struct jffs2_raw_dirent jint32_t node_crc; jint32_t name_crc; uint8_t name[0]; -} __attribute__((packed)); +}; /* The JFFS2 raw inode structure: Used for storage on physical media. */ /* The uid, gid, atime, mtime and ctime members could be longer, but @@ -149,6 +161,32 @@ struct jffs2_raw_inode jint32_t data_crc; /* CRC for the (compressed) data. */ jint32_t node_crc; /* CRC for the raw inode (excluding data) */ uint8_t data[0]; +}; + +struct jffs2_raw_xattr { + jint16_t magic; + jint16_t nodetype; /* = JFFS2_NODETYPE_XATTR */ + jint32_t totlen; + jint32_t hdr_crc; + jint32_t xid; /* XATTR identifier number */ + jint32_t version; + uint8_t xprefix; + uint8_t name_len; + jint16_t value_len; + jint32_t data_crc; + jint32_t node_crc; + uint8_t data[0]; +} __attribute__((packed)); + +struct jffs2_raw_xref +{ + jint16_t magic; + jint16_t nodetype; /* = JFFS2_NODETYPE_XREF */ + jint32_t totlen; + jint32_t hdr_crc; + jint32_t ino; /* inode number */ + jint32_t xid; /* XATTR identifier number */ + jint32_t node_crc; } __attribute__((packed)); struct jffs2_raw_summary @@ -163,14 +201,22 @@ struct jffs2_raw_summary jint32_t sum_crc; /* summary information crc */ jint32_t node_crc; /* node crc */ jint32_t sum[0]; /* inode summary info */ -} __attribute__((packed)); +}; union jffs2_node_union { struct jffs2_raw_inode i; struct jffs2_raw_dirent d; + struct jffs2_raw_xattr x; + struct jffs2_raw_xref r; struct jffs2_raw_summary s; struct jffs2_unknown_node u; }; +/* Data payload for device nodes. */ +union jffs2_device_node { + jint16_t old; + jint32_t new; +}; + #endif /* __LINUX_JFFS2_H__ */ diff -puN include/linux/module.h~git-mtd include/linux/module.h --- devel/include/linux/module.h~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/include/linux/module.h 2006-05-29 15:02:34.000000000 -0700 @@ -556,13 +556,4 @@ static inline void module_remove_driver( #define __MODULE_STRING(x) __stringify(x) -/* Use symbol_get and symbol_put instead. You'll thank me. */ -#define HAVE_INTER_MODULE -extern void __deprecated inter_module_register(const char *, - struct module *, const void *); -extern void __deprecated inter_module_unregister(const char *); -extern const void * __deprecated inter_module_get_request(const char *, - const char *); -extern void __deprecated inter_module_put(const char *); - #endif /* _LINUX_MODULE_H */ diff -puN include/linux/mtd/inftl.h~git-mtd include/linux/mtd/inftl.h --- devel/include/linux/mtd/inftl.h~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/include/linux/mtd/inftl.h 2006-05-29 15:02:34.000000000 -0700 @@ -46,7 +46,7 @@ struct INFTLrecord { unsigned int nb_blocks; /* number of physical blocks */ unsigned int nb_boot_blocks; /* number of blocks used by the bios */ struct erase_info instr; - struct nand_oobinfo oobinfo; + struct nand_ecclayout oobinfo; }; int INFTL_mount(struct INFTLrecord *s); diff -puN include/linux/mtd/mtd.h~git-mtd include/linux/mtd/mtd.h --- devel/include/linux/mtd/mtd.h~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/include/linux/mtd/mtd.h 2006-05-29 15:02:34.000000000 -0700 @@ -55,18 +55,77 @@ struct mtd_erase_region_info { u_int32_t numblocks; /* Number of blocks of erasesize in this region */ }; +/** + * struct mtd_ecc_stats - error correction status + * + * @corrected: number of corrected bits + * @failed: number of uncorrectable errors + */ +struct mtd_ecc_stats { + unsigned long corrected; + unsigned long failed; +}; + +/* + * oob operation modes + * + * MTD_OOB_PLACE: oob data are placed at the given offset + * MTD_OOB_AUTO: oob data are automatically placed at the free areas + * which are defined by the ecclayout + * MTD_OOB_RAW: mode to read raw data+oob in one chunk. The oob data + * is inserted into the data. Thats a raw image of the + * flash contents. + */ +typedef enum { + MTD_OOB_PLACE, + MTD_OOB_AUTO, + MTD_OOB_RAW, +} mtd_oob_mode_t; + +/** + * struct mtd_oob_ops - oob operation operands + * @mode: operation mode + * + * @len: number of bytes to write/read. When a data buffer is given + * (datbuf != NULL) this is the number of data bytes. When + + no data buffer is available this is the number of oob bytes. + * + * @retlen: number of bytes written/read. When a data buffer is given + * (datbuf != NULL) this is the number of data bytes. When + + no data buffer is available this is the number of oob bytes. + * + * @ooblen: number of oob bytes per page + * @ooboffs: offset of oob data in the oob area (only relevant when + * mode = MTD_OOB_PLACE) + * @datbuf: data buffer - if NULL only oob data are read/written + * @oobbuf: oob data buffer + */ +struct mtd_oob_ops { + mtd_oob_mode_t mode; + size_t len; + size_t retlen; + size_t ooblen; + uint32_t ooboffs; + uint8_t *datbuf; + uint8_t *oobbuf; +}; + struct mtd_info { u_char type; u_int32_t flags; u_int32_t size; // Total size of the MTD - /* "Major" erase size for the device. Naïve users may take this + /* "Major" erase size for the device. Naïve users may take this * to be the only erase size available, or may use the more detailed * information below if they desire */ u_int32_t erasesize; + /* Smallest availlable size for writing to the device. For NAND, + * this is the page size, for some NOR chips, the size of ECC + * covered blocks. + */ + u_int32_t writesize; - u_int32_t oobblock; // Size of OOB blocks (e.g. 512) u_int32_t oobsize; // Amount of OOB data per block (e.g. 16) u_int32_t ecctype; u_int32_t eccsize; @@ -78,7 +137,6 @@ struct mtd_info { * MTD_PROGRAM_REGIONS flag is set. * (Maybe we should have an union for those?) */ -#define MTD_PROGREGION_SIZE(mtd) (mtd)->oobblock #define MTD_PROGREGION_CTRLMODE_VALID(mtd) (mtd)->oobsize #define MTD_PROGREGION_CTRLMODE_INVALID(mtd) (mtd)->ecctype @@ -86,9 +144,8 @@ struct mtd_info { char *name; int index; - // oobinfo is a nand_oobinfo structure, which can be set by iotcl (MEMSETOOBINFO) - struct nand_oobinfo oobinfo; - u_int32_t oobavail; // Number of bytes in OOB area available for fs + /* ecc layout structure pointer - read only ! */ + struct nand_ecclayout *ecclayout; /* Data for variable erase regions. If numeraseregions is zero, * it means that the whole device has erasesize as given above. @@ -111,11 +168,10 @@ struct mtd_info { int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); - int (*read_ecc) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel); - int (*write_ecc) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel); - - int (*read_oob) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); - int (*write_oob) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); + int (*read_oob) (struct mtd_info *mtd, loff_t from, + struct mtd_oob_ops *ops); + int (*write_oob) (struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops); /* * Methods to access the protection register area, present in some @@ -129,17 +185,11 @@ struct mtd_info { int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); int (*lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len); - /* kvec-based read/write methods. We need these especially for NAND flash, - with its limited number of write cycles per erase. + /* kvec-based read/write methods. NB: The 'count' parameter is the number of _vectors_, each of which contains an (ofs, len) tuple. */ - int (*readv) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, size_t *retlen); - int (*readv_ecc) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, - size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel); int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen); - int (*writev_ecc) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, - size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel); /* Sync */ void (*sync) (struct mtd_info *mtd); @@ -158,6 +208,9 @@ struct mtd_info { struct notifier_block reboot_notifier; /* default mode before reboot */ + /* ECC status information */ + struct mtd_ecc_stats ecc_stats; + void *priv; struct module *owner; @@ -191,20 +244,6 @@ int default_mtd_writev(struct mtd_info * int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, size_t *retlen); -#define MTD_ERASE(mtd, args...) (*(mtd->erase))(mtd, args) -#define MTD_POINT(mtd, a,b,c,d) (*(mtd->point))(mtd, a,b,c, (u_char **)(d)) -#define MTD_UNPOINT(mtd, arg) (*(mtd->unpoint))(mtd, (u_char *)arg) -#define MTD_READ(mtd, args...) (*(mtd->read))(mtd, args) -#define MTD_WRITE(mtd, args...) (*(mtd->write))(mtd, args) -#define MTD_READV(mtd, args...) (*(mtd->readv))(mtd, args) -#define MTD_WRITEV(mtd, args...) (*(mtd->writev))(mtd, args) -#define MTD_READECC(mtd, args...) (*(mtd->read_ecc))(mtd, args) -#define MTD_WRITEECC(mtd, args...) (*(mtd->write_ecc))(mtd, args) -#define MTD_READOOB(mtd, args...) (*(mtd->read_oob))(mtd, args) -#define MTD_WRITEOOB(mtd, args...) (*(mtd->write_oob))(mtd, args) -#define MTD_SYNC(mtd) do { if (mtd->sync) (*(mtd->sync))(mtd); } while (0) - - #ifdef CONFIG_MTD_PARTITIONS void mtd_erase_callback(struct erase_info *instr); #else @@ -225,7 +264,7 @@ static inline void mtd_erase_callback(st #ifdef CONFIG_MTD_DEBUG #define DEBUG(n, args...) \ - do { \ + do { \ if (n <= CONFIG_MTD_DEBUG_VERBOSE) \ printk(KERN_INFO args); \ } while(0) diff -puN include/linux/mtd/nand.h~git-mtd include/linux/mtd/nand.h --- devel/include/linux/mtd/nand.h~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/include/linux/mtd/nand.h 2006-05-29 15:02:34.000000000 -0700 @@ -11,47 +11,11 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * Info: - * Contains standard defines and IDs for NAND flash devices + * Info: + * Contains standard defines and IDs for NAND flash devices * - * Changelog: - * 01-31-2000 DMW Created - * 09-18-2000 SJH Moved structure out of the Disk-On-Chip drivers - * so it can be used by other NAND flash device - * drivers. I also changed the copyright since none - * of the original contents of this file are specific - * to DoC devices. David can whack me with a baseball - * bat later if I did something naughty. - * 10-11-2000 SJH Added private NAND flash structure for driver - * 10-24-2000 SJH Added prototype for 'nand_scan' function - * 10-29-2001 TG changed nand_chip structure to support - * hardwarespecific function for accessing control lines - * 02-21-2002 TG added support for different read/write adress and - * ready/busy line access function - * 02-26-2002 TG added chip_delay to nand_chip structure to optimize - * command delay times for different chips - * 04-28-2002 TG OOB config defines moved from nand.c to avoid duplicate - * defines in jffs2/wbuf.c - * 08-07-2002 TG forced bad block location to byte 5 of OOB, even if - * CONFIG_MTD_NAND_ECC_JFFS2 is not set - * 08-10-2002 TG extensions to nand_chip structure to support HW-ECC - * - * 08-29-2002 tglx nand_chip structure: data_poi for selecting - * internal / fs-driver buffer - * support for 6byte/512byte hardware ECC - * read_ecc, write_ecc extended for different oob-layout - * oob layout selections: NAND_NONE_OOB, NAND_JFFS2_OOB, - * NAND_YAFFS_OOB - * 11-25-2002 tglx Added Manufacturer code FUJITSU, NATIONAL - * Split manufacturer and device ID structures - * - * 02-08-2004 tglx added option field to nand structure for chip anomalities - * 05-25-2004 tglx added bad block table support, ST-MICRO manufacturer id - * update of nand_chip structure description - * 01-17-2005 dmarlin added extended commands for AG-AND device and added option - * for BBT_AUTO_REFRESH. - * 01-20-2005 dmarlin added optional pointer to hardware specific callback for - * extra error status checks. + * Changelog: + * See git changelog. */ #ifndef __LINUX_MTD_NAND_H #define __LINUX_MTD_NAND_H @@ -66,10 +30,6 @@ extern int nand_scan (struct mtd_info *m /* Free resources held by the NAND device */ extern void nand_release (struct mtd_info *mtd); -/* Read raw data from the device without ECC */ -extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len, size_t ooblen); - - /* The maximum number of NAND chips in an array */ #define NAND_MAX_CHIPS 8 @@ -78,26 +38,24 @@ extern int nand_read_raw (struct mtd_inf * adjust this accordingly. */ #define NAND_MAX_OOBSIZE 64 +#define NAND_MAX_PAGESIZE 2048 /* * Constants for hardware specific CLE/ALE/NCE function -*/ + * + * These are bits which can be or'ed to set/clear multiple + * bits in one go. + */ /* Select the chip by setting nCE to low */ -#define NAND_CTL_SETNCE 1 -/* Deselect the chip by setting nCE to high */ -#define NAND_CTL_CLRNCE 2 +#define NAND_NCE 0x01 /* Select the command latch by setting CLE to high */ -#define NAND_CTL_SETCLE 3 -/* Deselect the command latch by setting CLE to low */ -#define NAND_CTL_CLRCLE 4 +#define NAND_CLE 0x02 /* Select the address latch by setting ALE to high */ -#define NAND_CTL_SETALE 5 -/* Deselect the address latch by setting ALE to low */ -#define NAND_CTL_CLRALE 6 -/* Set write protection by setting WP to high. Not used! */ -#define NAND_CTL_SETWP 7 -/* Clear write protection by setting WP to low. Not used! */ -#define NAND_CTL_CLRWP 8 +#define NAND_ALE 0x04 + +#define NAND_CTRL_CLE (NAND_NCE | NAND_CLE) +#define NAND_CTRL_ALE (NAND_NCE | NAND_ALE) +#define NAND_CTRL_CHANGE 0x80 /* * Standard NAND flash commands @@ -137,6 +95,8 @@ extern int nand_read_raw (struct mtd_inf #define NAND_CMD_STATUS_RESET 0x7f #define NAND_CMD_STATUS_CLEAR 0xff +#define NAND_CMD_NONE -1 + /* Status bits */ #define NAND_STATUS_FAIL 0x01 #define NAND_STATUS_FAIL_N1 0x02 @@ -147,21 +107,12 @@ extern int nand_read_raw (struct mtd_inf /* * Constants for ECC_MODES */ - -/* No ECC. Usage is not recommended ! */ -#define NAND_ECC_NONE 0 -/* Software ECC 3 byte ECC per 256 Byte data */ -#define NAND_ECC_SOFT 1 -/* Hardware ECC 3 byte ECC per 256 Byte data */ -#define NAND_ECC_HW3_256 2 -/* Hardware ECC 3 byte ECC per 512 Byte data */ -#define NAND_ECC_HW3_512 3 -/* Hardware ECC 3 byte ECC per 512 Byte data */ -#define NAND_ECC_HW6_512 4 -/* Hardware ECC 8 byte ECC per 512 Byte data */ -#define NAND_ECC_HW8_512 6 -/* Hardware ECC 12 byte ECC per 2048 Byte data */ -#define NAND_ECC_HW12_2048 7 +typedef enum { + NAND_ECC_NONE, + NAND_ECC_SOFT, + NAND_ECC_HW, + NAND_ECC_HW_SYNDROME, +} nand_ecc_modes_t; /* * Constants for Hardware ECC @@ -200,6 +151,10 @@ extern int nand_read_raw (struct mtd_inf * bits from adjacent blocks from 'leaking' in altering data. * This happens with the Renesas AG-AND chips, possibly others. */ #define BBT_AUTO_REFRESH 0x00000080 +/* Chip does not require ready check on read. True + * for all large page devices, as they do not support + * autoincrement.*/ +#define NAND_NO_READRDY 0x00000100 /* Options valid for Samsung large page devices */ #define NAND_SAMSUNG_LP_OPTIONS \ @@ -218,18 +173,12 @@ extern int nand_read_raw (struct mtd_inf /* Use a flash based bad block table. This option is passed to the * default bad block table function. */ #define NAND_USE_FLASH_BBT 0x00010000 -/* The hw ecc generator provides a syndrome instead a ecc value on read - * This can only work if we have the ecc bytes directly behind the - * data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */ -#define NAND_HWECC_SYNDROME 0x00020000 /* This option skips the bbt scan during initialization. */ -#define NAND_SKIP_BBTSCAN 0x00040000 +#define NAND_SKIP_BBTSCAN 0x00020000 /* Options set by nand scan */ -/* Nand scan has allocated oob_buf */ -#define NAND_OOBBUF_ALLOC 0x40000000 -/* Nand scan has allocated data_buf */ -#define NAND_DATABUF_ALLOC 0x80000000 +/* Nand scan has allocated controller struct */ +#define NAND_CONTROLLER_ALLOC 0x80000000 /* @@ -263,45 +212,95 @@ struct nand_hw_control { }; /** + * struct nand_ecc_ctrl - Control structure for ecc + * @mode: ecc mode + * @steps: number of ecc steps per page + * @size: data bytes per ecc step + * @bytes: ecc bytes per step + * @total: total number of ecc bytes per page + * @prepad: padding information for syndrome based ecc generators + * @postpad: padding information for syndrome based ecc generators + * @hwctl: function to control hardware ecc generator. Must only + * be provided if an hardware ECC is available + * @calculate: function for ecc calculation or readback from ecc hardware + * @correct: function for ecc correction, matching to ecc generator (sw/hw) + * @read_page: function to read a page according to the ecc generator requirements + * @write_page: function to write a page according to the ecc generator requirements + */ +struct nand_ecc_ctrl { + nand_ecc_modes_t mode; + int steps; + int size; + int bytes; + int total; + int prepad; + int postpad; + struct nand_ecclayout *layout; + void (*hwctl)(struct mtd_info *mtd, int mode); + int (*calculate)(struct mtd_info *mtd, + const uint8_t *dat, + uint8_t *ecc_code); + int (*correct)(struct mtd_info *mtd, uint8_t *dat, + uint8_t *read_ecc, + uint8_t *calc_ecc); + int (*read_page)(struct mtd_info *mtd, + struct nand_chip *chip, + uint8_t *buf); + void (*write_page)(struct mtd_info *mtd, + struct nand_chip *chip, + const uint8_t *buf); +}; + +/** + * struct nand_buffers - buffer structure for read/write + * @ecccalc: buffer for calculated ecc + * @ecccode: buffer for ecc read from flash + * @oobwbuf: buffer for write oob data + * @databuf: buffer for data - dynamically sized + * @oobrbuf: buffer to read oob data + * + * Do not change the order of buffers. databuf and oobrbuf must be in + * consecutive order. + */ +struct nand_buffers { + uint8_t ecccalc[NAND_MAX_OOBSIZE]; + uint8_t ecccode[NAND_MAX_OOBSIZE]; + uint8_t oobwbuf[NAND_MAX_OOBSIZE]; + uint8_t databuf[NAND_MAX_PAGESIZE]; + uint8_t oobrbuf[NAND_MAX_OOBSIZE]; +}; + +/** * struct nand_chip - NAND Private Flash Chip Data * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the flash device * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the flash device * @read_byte: [REPLACEABLE] read one byte from the chip - * @write_byte: [REPLACEABLE] write one byte to the chip * @read_word: [REPLACEABLE] read one word from the chip - * @write_word: [REPLACEABLE] write one word to the chip * @write_buf: [REPLACEABLE] write data from the buffer to the chip * @read_buf: [REPLACEABLE] read data from the chip into the buffer * @verify_buf: [REPLACEABLE] verify buffer contents against the chip data * @select_chip: [REPLACEABLE] select chip nr * @block_bad: [REPLACEABLE] check, if the block is bad * @block_markbad: [REPLACEABLE] mark the block bad - * @hwcontrol: [BOARDSPECIFIC] hardwarespecific function for accesing control-lines + * @cmd_ctrl: [BOARDSPECIFIC] hardwarespecific funtion for controlling + * ALE/CLE/nCE. Also used to write command and address * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing device ready/busy line * If set to NULL no access to ready/busy is available and the ready/busy information * is read from the chip status register * @cmdfunc: [REPLACEABLE] hardwarespecific function for writing commands to the chip * @waitfunc: [REPLACEABLE] hardwarespecific function for wait on ready - * @calculate_ecc: [REPLACEABLE] function for ecc calculation or readback from ecc hardware - * @correct_data: [REPLACEABLE] function for ecc correction, matching to ecc generator (sw/hw) - * @enable_hwecc: [BOARDSPECIFIC] function to enable (reset) hardware ecc generator. Must only - * be provided if a hardware ECC is available + * @ecc: [BOARDSPECIFIC] ecc control ctructure * @erase_cmd: [INTERN] erase command write function, selectable due to AND support * @scan_bbt: [REPLACEABLE] function to scan bad block table - * @eccmode: [BOARDSPECIFIC] mode of ecc, see defines - * @eccsize: [INTERN] databytes used per ecc-calculation - * @eccbytes: [INTERN] number of ecc bytes per ecc-calculation step - * @eccsteps: [INTERN] number of ecc calculation steps per page * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transfering data from array to read regs (tR) - * @chip_lock: [INTERN] spinlock used to protect access to this structure and the chip * @wq: [INTERN] wait queue to sleep on if a NAND operation is in progress - * @state: [INTERN] the current state of the NAND device + * @state: [INTERN] the current state of the NAND device * @page_shift: [INTERN] number of address bits in a page (column address bits) * @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock * @bbt_erase_shift: [INTERN] number of address bits in a bbt entry * @chip_shift: [INTERN] number of address bits in one chip - * @data_buf: [INTERN] internal buffer for one page + oob - * @oob_buf: [INTERN] oob buffer for one eraseblock + * @datbuf: [INTERN] internal buffer for one page + oob + * @oobbuf: [INTERN] oob buffer for one eraseblock * @oobdirty: [INTERN] indicates that oob_buf must be reinitialized * @data_poi: [INTERN] pointer to a data buffer * @options: [BOARDSPECIFIC] various chip options. They can partly be set to inform nand_scan about @@ -311,12 +310,13 @@ struct nand_hw_control { * @chipsize: [INTERN] the size of one chip for multichip arrays * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1 * @pagebuf: [INTERN] holds the pagenumber which is currently in data_buf - * @autooob: [REPLACEABLE] the default (auto)placement scheme + * @ecclayout: [REPLACEABLE] the default ecc placement scheme * @bbt: [INTERN] bad block table pointer * @bbt_td: [REPLACEABLE] bad block table descriptor for flash lookup * @bbt_md: [REPLACEABLE] bad block table mirror descriptor * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial bad block scan - * @controller: [OPTIONAL] a pointer to a hardware controller structure which is shared among multiple independend devices + * @controller: [REPLACEABLE] a pointer to a hardware controller structure + * which is shared among multiple independend devices * @priv: [OPTIONAL] pointer to private chip date * @errstat: [OPTIONAL] hardware specific function to perform additional error status checks * (determine if errors are correctable) @@ -324,58 +324,57 @@ struct nand_hw_control { struct nand_chip { void __iomem *IO_ADDR_R; - void __iomem *IO_ADDR_W; + void __iomem *IO_ADDR_W; - u_char (*read_byte)(struct mtd_info *mtd); - void (*write_byte)(struct mtd_info *mtd, u_char byte); + uint8_t (*read_byte)(struct mtd_info *mtd); u16 (*read_word)(struct mtd_info *mtd); - void (*write_word)(struct mtd_info *mtd, u16 word); - - void (*write_buf)(struct mtd_info *mtd, const u_char *buf, int len); - void (*read_buf)(struct mtd_info *mtd, u_char *buf, int len); - int (*verify_buf)(struct mtd_info *mtd, const u_char *buf, int len); + void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len); + void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len); + int (*verify_buf)(struct mtd_info *mtd, const uint8_t *buf, int len); void (*select_chip)(struct mtd_info *mtd, int chip); int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip); int (*block_markbad)(struct mtd_info *mtd, loff_t ofs); - void (*hwcontrol)(struct mtd_info *mtd, int cmd); - int (*dev_ready)(struct mtd_info *mtd); - void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr); - int (*waitfunc)(struct mtd_info *mtd, struct nand_chip *this, int state); - int (*calculate_ecc)(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code); - int (*correct_data)(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc); - void (*enable_hwecc)(struct mtd_info *mtd, int mode); + void (*cmd_ctrl)(struct mtd_info *mtd, int dat, + unsigned int ctrl); + int (*dev_ready)(struct mtd_info *mtd); + void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr); + int (*waitfunc)(struct mtd_info *mtd, struct nand_chip *this, int state); void (*erase_cmd)(struct mtd_info *mtd, int page); int (*scan_bbt)(struct mtd_info *mtd); - int eccmode; - int eccsize; - int eccbytes; - int eccsteps; - int chip_delay; - spinlock_t chip_lock; - wait_queue_head_t wq; - nand_state_t state; - int page_shift; + int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page); + + int chip_delay; + unsigned int options; + + int page_shift; int phys_erase_shift; int bbt_erase_shift; int chip_shift; - u_char *data_buf; - u_char *oob_buf; - int oobdirty; - u_char *data_poi; - unsigned int options; - int badblockpos; int numchips; unsigned long chipsize; int pagemask; int pagebuf; - struct nand_oobinfo *autooob; + int badblockpos; + + nand_state_t state; + + uint8_t *oob_poi; + struct nand_hw_control *controller; + struct nand_ecclayout *ecclayout; + + struct nand_ecc_ctrl ecc; + struct nand_buffers buffers; + struct nand_hw_control hwcontrol; + + struct mtd_oob_ops ops; + uint8_t *bbt; struct nand_bbt_descr *bbt_td; struct nand_bbt_descr *bbt_md; + struct nand_bbt_descr *badblock_pattern; - struct nand_hw_control *controller; + void *priv; - int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page); }; /* @@ -387,19 +386,19 @@ struct nand_chip { #define NAND_MFR_NATIONAL 0x8f #define NAND_MFR_RENESAS 0x07 #define NAND_MFR_STMICRO 0x20 -#define NAND_MFR_HYNIX 0xad +#define NAND_MFR_HYNIX 0xad /** * struct nand_flash_dev - NAND Flash Device ID Structure * - * @name: Identify the device type - * @id: device ID code - * @pagesize: Pagesize in bytes. Either 256 or 512 or 0 + * @name: Identify the device type + * @id: device ID code + * @pagesize: Pagesize in bytes. Either 256 or 512 or 0 * If the pagesize is 0, then the real pagesize * and the eraseize are determined from the * extended id bytes in the chip - * @erasesize: Size of an erase block in the flash device. - * @chipsize: Total chipsize in Mega Bytes + * @erasesize: Size of an erase block in the flash device. + * @chipsize: Total chipsize in Mega Bytes * @options: Bitfield to store chip relevant options */ struct nand_flash_dev { @@ -414,7 +413,7 @@ struct nand_flash_dev { /** * struct nand_manufacturers - NAND Flash Manufacturer ID Structure * @name: Manufacturer name - * @id: manufacturer ID code of device. + * @id: manufacturer ID code of device. */ struct nand_manufacturers { int id; @@ -454,7 +453,7 @@ struct nand_bbt_descr { int veroffs; uint8_t version[NAND_MAX_CHIPS]; int len; - int maxblocks; + int maxblocks; int reserved_block_code; uint8_t *pattern; }; @@ -493,14 +492,14 @@ struct nand_bbt_descr { /* The maximum number of blocks to scan for a bbt */ #define NAND_BBT_SCAN_MAXBLOCKS 4 -extern int nand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd); -extern int nand_update_bbt (struct mtd_info *mtd, loff_t offs); -extern int nand_default_bbt (struct mtd_info *mtd); -extern int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt); -extern int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbbt); -extern int nand_do_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, - size_t * retlen, u_char * buf, u_char * oob_buf, - struct nand_oobinfo *oobsel, int flags); +extern int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd); +extern int nand_update_bbt(struct mtd_info *mtd, loff_t offs); +extern int nand_default_bbt(struct mtd_info *mtd); +extern int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt); +extern int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, + int allowbbt); +extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t * retlen, uint8_t * buf); /* * Constants for oob configuration @@ -508,4 +507,53 @@ extern int nand_do_read_ecc (struct mtd_ #define NAND_SMALL_BADBLOCK_POS 5 #define NAND_LARGE_BADBLOCK_POS 0 +/** + * struct platform_nand_chip - chip level device structure + * + * @nr_chips: max. number of chips to scan for + * @chip_offs: chip number offset + * @nr_partitions: number of partitions pointed to by partitions (or zero) + * @partitions: mtd partition list + * @chip_delay: R/B delay value in us + * @options: Option flags, e.g. 16bit buswidth + * @ecclayout: ecc layout info structure + * @priv: hardware controller specific settings + */ +struct platform_nand_chip { + int nr_chips; + int chip_offset; + int nr_partitions; + struct mtd_partition *partitions; + struct nand_ecclayout *ecclayout; + int chip_delay; + unsigned int options; + void *priv; +}; + +/** + * struct platform_nand_ctrl - controller level device structure + * + * @hwcontrol: platform specific hardware control structure + * @dev_ready: platform specific function to read ready/busy pin + * @select_chip: platform specific chip select function + * @priv_data: private data to transport driver specific settings + * + * All fields are optional and depend on the hardware driver requirements + */ +struct platform_nand_ctrl { + void (*hwcontrol)(struct mtd_info *mtd, int cmd); + int (*dev_ready)(struct mtd_info *mtd); + void (*select_chip)(struct mtd_info *mtd, int chip); + void *priv; +}; + +/* Some helpers to access the data structures */ +static inline +struct platform_nand_chip *get_platform_nandchip(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd->priv; + + return chip->priv; +} + #endif /* __LINUX_MTD_NAND_H */ diff -puN /dev/null include/linux/mtd/ndfc.h --- /dev/null 2006-05-29 10:18:53.280907750 -0700 +++ devel-akpm/include/linux/mtd/ndfc.h 2006-05-29 15:02:34.000000000 -0700 @@ -0,0 +1,67 @@ +/* + * linux/include/linux/mtd/ndfc.h + * + * Copyright (c) 2006 Thomas Gleixner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Info: + * Contains defines, datastructures for ndfc nand controller + * + */ +#ifndef __LINUX_MTD_NDFC_H +#define __LINUX_MTD_NDFC_H + +/* NDFC Register definitions */ +#define NDFC_CMD 0x00 +#define NDFC_ALE 0x04 +#define NDFC_DATA 0x08 +#define NDFC_ECC 0x10 +#define NDFC_BCFG0 0x30 +#define NDFC_BCFG1 0x34 +#define NDFC_BCFG2 0x38 +#define NDFC_BCFG3 0x3c +#define NDFC_CCR 0x40 +#define NDFC_STAT 0x44 +#define NDFC_HWCTL 0x48 +#define NDFC_REVID 0x50 + +#define NDFC_STAT_IS_READY 0x01000000 + +#define NDFC_CCR_RESET_CE 0x80000000 /* CE Reset */ +#define NDFC_CCR_RESET_ECC 0x40000000 /* ECC Reset */ +#define NDFC_CCR_RIE 0x20000000 /* Interrupt Enable on Device Rdy */ +#define NDFC_CCR_REN 0x10000000 /* Enable wait for Rdy in LinearR */ +#define NDFC_CCR_ROMEN 0x08000000 /* Enable ROM In LinearR */ +#define NDFC_CCR_ARE 0x04000000 /* Auto-Read Enable */ +#define NDFC_CCR_BS(x) (((x) & 0x3) << 24) /* Select Bank on CE[x] */ +#define NDFC_CCR_BS_MASK 0x03000000 /* Select Bank */ +#define NDFC_CCR_ARAC0 0x00000000 /* 3 Addr, 1 Col 2 Row 512b page */ +#define NDFC_CCR_ARAC1 0x00001000 /* 4 Addr, 1 Col 3 Row 512b page */ +#define NDFC_CCR_ARAC2 0x00002000 /* 4 Addr, 2 Col 2 Row 2K page */ +#define NDFC_CCR_ARAC3 0x00003000 /* 5 Addr, 2 Col 3 Row 2K page */ +#define NDFC_CCR_ARAC_MASK 0x00003000 /* Auto-Read mode Addr Cycles */ +#define NDFC_CCR_RPG 0x0000C000 /* Auto-Read Page */ +#define NDFC_CCR_EBCC 0x00000004 /* EBC Configuration Completed */ +#define NDFC_CCR_DHC 0x00000002 /* Direct Hardware Control Enable */ + +#define NDFC_BxCFG_EN 0x80000000 /* Bank Enable */ +#define NDFC_BxCFG_CED 0x40000000 /* nCE Style */ +#define NDFC_BxCFG_SZ_MASK 0x08000000 /* Bank Size */ +#define NDFC_BxCFG_SZ_8BIT 0x00000000 /* 8bit */ +#define NDFC_BxCFG_SZ_16BIT 0x08000000 /* 16bit */ + +#define NDFC_MAX_BANKS 4 + +struct ndfc_controller_settings { + uint32_t ccr_settings; + uint64_t ndfc_erpn; +}; + +struct ndfc_chip_settings { + uint32_t bank_settings; +}; + +#endif diff -puN include/linux/mtd/nftl.h~git-mtd include/linux/mtd/nftl.h --- devel/include/linux/mtd/nftl.h~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/include/linux/mtd/nftl.h 2006-05-29 15:02:34.000000000 -0700 @@ -37,7 +37,7 @@ struct NFTLrecord { unsigned int nb_blocks; /* number of physical blocks */ unsigned int nb_boot_blocks; /* number of blocks used by the bios */ struct erase_info instr; - struct nand_oobinfo oobinfo; + struct nand_ecclayout oobinfo; }; int NFTL_mount(struct NFTLrecord *s); diff -puN include/linux/mtd/onenand.h~git-mtd include/linux/mtd/onenand.h --- devel/include/linux/mtd/onenand.h~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/include/linux/mtd/onenand.h 2006-05-29 15:02:34.000000000 -0700 @@ -35,6 +35,8 @@ typedef enum { FL_SYNCING, FL_UNLOCKING, FL_LOCKING, + FL_RESETING, + FL_OTPING, FL_PM_SUSPENDED, } onenand_state_t; @@ -75,7 +77,7 @@ struct onenand_bufferram { * @param chip_lock [INTERN] spinlock used to protect access to this structure and the chip * @param wq [INTERN] wait queue to sleep on if a OneNAND operation is in progress * @param state [INTERN] the current state of the OneNAND device - * @param autooob [REPLACEABLE] the default (auto)placement scheme + * @param ecclayout [REPLACEABLE] the default ecc placement scheme * @param bbm [REPLACEABLE] pointer to Bad Block Management * @param priv [OPTIONAL] pointer to private chip date */ @@ -111,9 +113,9 @@ struct onenand_chip { onenand_state_t state; unsigned char *page_buf; - struct nand_oobinfo *autooob; + struct nand_ecclayout *ecclayout; - void *bbm; + void *bbm; void *priv; }; @@ -130,6 +132,9 @@ struct onenand_chip { #define ONENAND_SET_SYS_CFG1(v, this) \ (this->write_word(v, this->base + ONENAND_REG_SYS_CFG1)) +/* Check byte access in OneNAND */ +#define ONENAND_CHECK_BYTE_ACCESS(addr) (addr & 0x1) + /* * Options bits */ diff -puN include/linux/mtd/onenand_regs.h~git-mtd include/linux/mtd/onenand_regs.h --- devel/include/linux/mtd/onenand_regs.h~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/include/linux/mtd/onenand_regs.h 2006-05-29 15:02:34.000000000 -0700 @@ -112,6 +112,7 @@ #define ONENAND_CMD_LOCK_TIGHT (0x2C) #define ONENAND_CMD_ERASE (0x94) #define ONENAND_CMD_RESET (0xF0) +#define ONENAND_CMD_OTP_ACCESS (0x65) #define ONENAND_CMD_READID (0x90) /* NOTE: Those are not *REAL* commands */ @@ -152,6 +153,8 @@ #define ONENAND_CTRL_ERASE (1 << 11) #define ONENAND_CTRL_ERROR (1 << 10) #define ONENAND_CTRL_RSTB (1 << 7) +#define ONENAND_CTRL_OTP_L (1 << 6) +#define ONENAND_CTRL_OTP_BL (1 << 5) /* * Interrupt Status Register F241h (R) @@ -177,4 +180,9 @@ #define ONENAND_ECC_2BIT (1 << 1) #define ONENAND_ECC_2BIT_ALL (0xAAAA) +/* + * One-Time Programmable (OTP) + */ +#define ONENAND_OTP_LOCK_OFFSET (14) + #endif /* __ONENAND_REG_H */ diff -puN include/linux/mtd/partitions.h~git-mtd include/linux/mtd/partitions.h --- devel/include/linux/mtd/partitions.h~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/include/linux/mtd/partitions.h 2006-05-29 15:02:34.000000000 -0700 @@ -41,7 +41,7 @@ struct mtd_partition { u_int32_t size; /* partition size */ u_int32_t offset; /* offset within the master MTD space */ u_int32_t mask_flags; /* master MTD flags to mask out for this partition */ - struct nand_oobinfo *oobsel; /* out of band layout for this partition (NAND only)*/ + struct nand_ecclayout *ecclayout; /* out of band layout for this partition (NAND only)*/ struct mtd_info **mtdp; /* pointer to store the MTD object */ }; diff -puN include/linux/mtd/physmap.h~git-mtd include/linux/mtd/physmap.h --- devel/include/linux/mtd/physmap.h~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/include/linux/mtd/physmap.h 2006-05-29 15:02:34.000000000 -0700 @@ -54,7 +54,5 @@ static inline void physmap_configure(uns void physmap_set_partitions(struct mtd_partition *parts, int num_parts); #endif /* defined(CONFIG_MTD_PARTITIONS) */ -#endif /* defined(CONFIG_MTD) */ #endif /* __LINUX_MTD_PHYSMAP__ */ - diff -puN include/mtd/mtd-abi.h~git-mtd include/mtd/mtd-abi.h --- devel/include/mtd/mtd-abi.h~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/include/mtd/mtd-abi.h 2006-05-29 15:02:34.000000000 -0700 @@ -29,28 +29,16 @@ struct mtd_oob_buf { #define MTD_ROM 2 #define MTD_NORFLASH 3 #define MTD_NANDFLASH 4 -#define MTD_PEROM 5 #define MTD_DATAFLASH 6 -#define MTD_OTHER 14 -#define MTD_UNKNOWN 15 -#define MTD_CLEAR_BITS 1 // Bits can be cleared (flash) -#define MTD_SET_BITS 2 // Bits can be set -#define MTD_ERASEABLE 4 // Has an erase function -#define MTD_WRITEB_WRITEABLE 8 // Direct IO is possible -#define MTD_VOLATILE 16 // Set for RAMs -#define MTD_XIP 32 // eXecute-In-Place possible -#define MTD_OOB 64 // Out-of-band data (NAND flash) -#define MTD_ECC 128 // Device capable of automatic ECC -#define MTD_NO_VIRTBLOCKS 256 // Virtual blocks not allowed -#define MTD_PROGRAM_REGIONS 512 // Configurable Programming Regions +#define MTD_WRITEABLE 0x400 /* Device is writeable */ +#define MTD_BIT_WRITEABLE 0x800 /* Single bits can be flipped */ // Some common devices / combinations of capabilities #define MTD_CAP_ROM 0 -#define MTD_CAP_RAM (MTD_CLEAR_BITS|MTD_SET_BITS|MTD_WRITEB_WRITEABLE) -#define MTD_CAP_NORFLASH (MTD_CLEAR_BITS|MTD_ERASEABLE) -#define MTD_CAP_NANDFLASH (MTD_CLEAR_BITS|MTD_ERASEABLE|MTD_OOB) -#define MTD_WRITEABLE (MTD_CLEAR_BITS|MTD_SET_BITS) +#define MTD_CAP_RAM (MTD_WRITEABLE | MTD_BIT_WRITEABLE) +#define MTD_CAP_NORFLASH (MTD_WRITEABLE | MTD_BIT_WRITEABLE) +#define MTD_CAP_NANDFLASH (MTD_WRITEABLE) // Types of automatic ECC/Checksum available @@ -75,7 +63,7 @@ struct mtd_info_user { uint32_t flags; uint32_t size; // Total size of the MTD uint32_t erasesize; - uint32_t oobblock; // Size of OOB blocks (e.g. 512) + uint32_t writesize; uint32_t oobsize; // Amount of OOB data per block (e.g. 16) uint32_t ecctype; uint32_t eccsize; @@ -95,12 +83,12 @@ struct otp_info { uint32_t locked; }; -#define MEMGETINFO _IOR('M', 1, struct mtd_info_user) -#define MEMERASE _IOW('M', 2, struct erase_info_user) -#define MEMWRITEOOB _IOWR('M', 3, struct mtd_oob_buf) -#define MEMREADOOB _IOWR('M', 4, struct mtd_oob_buf) -#define MEMLOCK _IOW('M', 5, struct erase_info_user) -#define MEMUNLOCK _IOW('M', 6, struct erase_info_user) +#define MEMGETINFO _IOR('M', 1, struct mtd_info_user) +#define MEMERASE _IOW('M', 2, struct erase_info_user) +#define MEMWRITEOOB _IOWR('M', 3, struct mtd_oob_buf) +#define MEMREADOOB _IOWR('M', 4, struct mtd_oob_buf) +#define MEMLOCK _IOW('M', 5, struct erase_info_user) +#define MEMUNLOCK _IOW('M', 6, struct erase_info_user) #define MEMGETREGIONCOUNT _IOR('M', 7, int) #define MEMGETREGIONINFO _IOWR('M', 8, struct region_info_user) #define MEMSETOOBSEL _IOW('M', 9, struct nand_oobinfo) @@ -110,8 +98,13 @@ struct otp_info { #define OTPSELECT _IOR('M', 13, int) #define OTPGETREGIONCOUNT _IOW('M', 14, int) #define OTPGETREGIONINFO _IOW('M', 15, struct otp_info) -#define OTPLOCK _IOR('M', 16, struct otp_info) +#define OTPLOCK _IOR('M', 16, struct otp_info) +#define ECCGETLAYOUT _IOR('M', 17, struct nand_ecclayout) +/* + * Obsolete legacy interface. Keep it in order not to break userspace + * interfaces + */ struct nand_oobinfo { uint32_t useecc; uint32_t eccbytes; @@ -119,4 +112,21 @@ struct nand_oobinfo { uint32_t eccpos[32]; }; +struct nand_oobfree { + uint32_t offset; + uint32_t length; +}; + +#define MTD_MAX_OOBFREE_ENTRIES 8 +/* + * ECC layout control structure. Exported to userspace for + * diagnosis and to allow creation of raw images + */ +struct nand_ecclayout { + uint32_t eccbytes; + uint32_t eccpos[64]; + uint32_t oobavail; + struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES]; +}; + #endif /* __MTD_ABI_H__ */ diff -puN include/mtd/mtd-user.h~git-mtd include/mtd/mtd-user.h --- devel/include/mtd/mtd-user.h~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/include/mtd/mtd-user.h 2006-05-29 15:02:34.000000000 -0700 @@ -16,5 +16,6 @@ typedef struct mtd_info_user mtd_info_t; typedef struct erase_info_user erase_info_t; typedef struct region_info_user region_info_t; typedef struct nand_oobinfo nand_oobinfo_t; +typedef struct nand_ecclayout nand_ecclayout_t; #endif /* __MTD_USER_H__ */ diff -puN init/Kconfig~git-mtd init/Kconfig --- devel/init/Kconfig~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/init/Kconfig 2006-05-29 15:02:34.000000000 -0700 @@ -397,9 +397,6 @@ config SLOB default !SLAB bool -config OBSOLETE_INTERMODULE - tristate - menu "Loadable module support" config MODULES diff -L kernel/intermodule.c -puN kernel/intermodule.c~git-mtd /dev/null --- devel/kernel/intermodule.c +++ /dev/null 2006-05-29 10:18:53.280907750 -0700 @@ -1,184 +0,0 @@ -/* Deprecated, do not use. Moved from module.c to here. --RR */ - -/* Written by Keith Owens Oct 2000 */ -#include -#include -#include -#include -#include - -/* inter_module functions are always available, even when the kernel is - * compiled without modules. Consumers of inter_module_xxx routines - * will always work, even when both are built into the kernel, this - * approach removes lots of #ifdefs in mainline code. - */ - -static struct list_head ime_list = LIST_HEAD_INIT(ime_list); -static DEFINE_SPINLOCK(ime_lock); -static int kmalloc_failed; - -struct inter_module_entry { - struct list_head list; - const char *im_name; - struct module *owner; - const void *userdata; -}; - -/** - * inter_module_register - register a new set of inter module data. - * @im_name: an arbitrary string to identify the data, must be unique - * @owner: module that is registering the data, always use THIS_MODULE - * @userdata: pointer to arbitrary userdata to be registered - * - * Description: Check that the im_name has not already been registered, - * complain if it has. For new data, add it to the inter_module_entry - * list. - */ -void inter_module_register(const char *im_name, struct module *owner, const void *userdata) -{ - struct list_head *tmp; - struct inter_module_entry *ime, *ime_new; - - if (!(ime_new = kzalloc(sizeof(*ime), GFP_KERNEL))) { - /* Overloaded kernel, not fatal */ - printk(KERN_ERR - "Aiee, inter_module_register: cannot kmalloc entry for '%s'\n", - im_name); - kmalloc_failed = 1; - return; - } - ime_new->im_name = im_name; - ime_new->owner = owner; - ime_new->userdata = userdata; - - spin_lock(&ime_lock); - list_for_each(tmp, &ime_list) { - ime = list_entry(tmp, struct inter_module_entry, list); - if (strcmp(ime->im_name, im_name) == 0) { - spin_unlock(&ime_lock); - kfree(ime_new); - /* Program logic error, fatal */ - printk(KERN_ERR "inter_module_register: duplicate im_name '%s'", im_name); - BUG(); - } - } - list_add(&(ime_new->list), &ime_list); - spin_unlock(&ime_lock); -} - -/** - * inter_module_unregister - unregister a set of inter module data. - * @im_name: an arbitrary string to identify the data, must be unique - * - * Description: Check that the im_name has been registered, complain if - * it has not. For existing data, remove it from the - * inter_module_entry list. - */ -void inter_module_unregister(const char *im_name) -{ - struct list_head *tmp; - struct inter_module_entry *ime; - - spin_lock(&ime_lock); - list_for_each(tmp, &ime_list) { - ime = list_entry(tmp, struct inter_module_entry, list); - if (strcmp(ime->im_name, im_name) == 0) { - list_del(&(ime->list)); - spin_unlock(&ime_lock); - kfree(ime); - return; - } - } - spin_unlock(&ime_lock); - if (kmalloc_failed) { - printk(KERN_ERR - "inter_module_unregister: no entry for '%s', " - "probably caused by previous kmalloc failure\n", - im_name); - return; - } - else { - /* Program logic error, fatal */ - printk(KERN_ERR "inter_module_unregister: no entry for '%s'", im_name); - BUG(); - } -} - -/** - * inter_module_get - return arbitrary userdata from another module. - * @im_name: an arbitrary string to identify the data, must be unique - * - * Description: If the im_name has not been registered, return NULL. - * Try to increment the use count on the owning module, if that fails - * then return NULL. Otherwise return the userdata. - */ -static const void *inter_module_get(const char *im_name) -{ - struct list_head *tmp; - struct inter_module_entry *ime; - const void *result = NULL; - - spin_lock(&ime_lock); - list_for_each(tmp, &ime_list) { - ime = list_entry(tmp, struct inter_module_entry, list); - if (strcmp(ime->im_name, im_name) == 0) { - if (try_module_get(ime->owner)) - result = ime->userdata; - break; - } - } - spin_unlock(&ime_lock); - return(result); -} - -/** - * inter_module_get_request - im get with automatic request_module. - * @im_name: an arbitrary string to identify the data, must be unique - * @modname: module that is expected to register im_name - * - * Description: If inter_module_get fails, do request_module then retry. - */ -const void *inter_module_get_request(const char *im_name, const char *modname) -{ - const void *result = inter_module_get(im_name); - if (!result) { - request_module("%s", modname); - result = inter_module_get(im_name); - } - return(result); -} - -/** - * inter_module_put - release use of data from another module. - * @im_name: an arbitrary string to identify the data, must be unique - * - * Description: If the im_name has not been registered, complain, - * otherwise decrement the use count on the owning module. - */ -void inter_module_put(const char *im_name) -{ - struct list_head *tmp; - struct inter_module_entry *ime; - - spin_lock(&ime_lock); - list_for_each(tmp, &ime_list) { - ime = list_entry(tmp, struct inter_module_entry, list); - if (strcmp(ime->im_name, im_name) == 0) { - if (ime->owner) - module_put(ime->owner); - spin_unlock(&ime_lock); - return; - } - } - spin_unlock(&ime_lock); - printk(KERN_ERR "inter_module_put: no entry for '%s'", im_name); - BUG(); -} - -EXPORT_SYMBOL(inter_module_register); -EXPORT_SYMBOL(inter_module_unregister); -EXPORT_SYMBOL(inter_module_get_request); -EXPORT_SYMBOL(inter_module_put); - -MODULE_LICENSE("GPL"); - diff -puN kernel/Makefile~git-mtd kernel/Makefile --- devel/kernel/Makefile~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/kernel/Makefile 2006-05-29 15:02:34.000000000 -0700 @@ -20,7 +20,6 @@ obj-$(CONFIG_SMP) += cpu.o spinlock.o obj-$(CONFIG_DEBUG_SPINLOCK) += spinlock.o obj-$(CONFIG_UID16) += uid16.o obj-$(CONFIG_MODULES) += module.o -obj-$(CONFIG_OBSOLETE_INTERMODULE) += intermodule.o obj-$(CONFIG_KALLSYMS) += kallsyms.o obj-$(CONFIG_PM) += power/ obj-$(CONFIG_BSD_PROCESS_ACCT) += acct.o diff -puN MAINTAINERS~git-mtd MAINTAINERS --- MAINTAINERS~git-mtd 2006-05-29 15:02:34.000000000 -0700 +++ devel-akpm/MAINTAINERS 2006-05-29 15:02:34.000000000 -0700 @@ -1850,12 +1850,12 @@ S: linux-scsi@vger.kernel.org W: http://megaraid.lsilogic.com S: Maintained -MEMORY TECHNOLOGY DEVICES +MEMORY TECHNOLOGY DEVICES (MTD) P: David Woodhouse M: dwmw2@infradead.org W: http://www.linux-mtd.infradead.org/ L: linux-mtd@lists.infradead.org -T: git kernel.org:/pub/scm/linux/kernel/git/tglx/mtd-2.6.git +T: git git://git.infradead.org/mtd-2.6.git S: Maintained MICROTEK X6 SCANNER _