From: Rudolf Marek Content-Disposition: inline; filename=hwmon-k8temp-documentation-update.patch Update the documentation for the k8temp driver. Signed-off-by: Rudolf Marek Signed-off-by: Jean Delvare --- Documentation/hwmon/k8temp | 13 ++++++++----- MAINTAINERS | 6 ++++++ drivers/hwmon/Kconfig | 6 ++++-- 3 files changed, 18 insertions(+), 7 deletions(-) --- linux-2.6.19-rc2.orig/Documentation/hwmon/k8temp 2006-10-14 09:44:34.000000000 +0200 +++ linux-2.6.19-rc2/Documentation/hwmon/k8temp 2006-10-14 09:53:18.000000000 +0200 @@ -2,7 +2,7 @@ ==================== Supported chips: - * AMD K8 CPU + * AMD Athlon64/FX or Opteron CPUs Prefix: 'k8temp' Addresses scanned: PCI space Datasheet: http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf @@ -13,10 +13,13 @@ Description ----------- -This driver permits reading temperature sensor(s) embedded inside AMD K8 CPUs. -Official documentation says that it works from revision F of K8 core, but -in fact it seems to be implemented for all revisions of K8 except the first -two revisions (SH-B0 and SH-B3). +This driver permits reading temperature sensor(s) embedded inside AMD K8 +family CPUs (Athlon64/FX, Opteron). Official documentation says that it works +from revision F of K8 core, but in fact it seems to be implemented for all +revisions of K8 except the first two revisions (SH-B0 and SH-B3). + +Please note that you will need at least lm-sensors 2.10.1 for proper userspace +support. There can be up to four temperature sensors inside single CPU. The driver will auto-detect the sensors and will display only temperatures from --- linux-2.6.19-rc2.orig/drivers/hwmon/Kconfig 2006-10-14 09:53:17.000000000 +0200 +++ linux-2.6.19-rc2/drivers/hwmon/Kconfig 2006-10-14 09:53:18.000000000 +0200 @@ -95,11 +95,13 @@ will be called adm9240. config SENSORS_K8TEMP - tristate "AMD K8 processor sensor" + tristate "AMD Athlon64/FX or Opteron temperature sensor" depends on HWMON && X86 && PCI && EXPERIMENTAL help If you say yes here you get support for the temperature - sensor(s) inside your AMD K8 CPU. + sensor(s) inside your CPU. Supported is whole AMD K8 + microarchitecture. Please note that you will need at least + lm-sensors 2.10.1 for proper userspace support. This driver can also be built as a module. If so, the module will be called k8temp. --- linux-2.6.19-rc2.orig/MAINTAINERS 2006-10-14 09:47:24.000000000 +0200 +++ linux-2.6.19-rc2/MAINTAINERS 2006-10-14 09:53:18.000000000 +0200 @@ -1668,6 +1668,12 @@ L: ext2-devel@lists.sourceforge.net S: Maintained +K8TEMP HARDWARE MONITORING DRIVER +P: Rudolf Marek +M: r.marek@assembler.cz +L: lm-sensors@lm-sensors.org +S: Maintained + KCONFIG P: Roman Zippel M: zippel@linux-m68k.org