GIT fbb8f337c44872bb9be650fefe5e14319720da6e git+ssh://master.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git#ALL commit 987dfa93c178c697c4ea100b299ed7f8230795c2 Author: Kristen Carlson Accardi Date: Fri Nov 10 16:14:47 2006 -0800 [PATCH] libata: change order of _SDD/_GTF execution (resend #3) Make the sdd call come before gtf. _SDD is used to provide input to the _GTF file, so it should be executed first. Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jeff Garzik (cherry picked from 89d74215e1e5b79ea084385b5c83d0e33cf2d655 commit) commit 81e3f80a96ffa091f9d0d3248350e0862d90aff4 Author: Kristen Carlson Accardi Date: Thu Sep 28 11:29:12 2006 -0700 [PATCH] libata: ACPI _SDD support _SDD (Set Device Data) is an ACPI method that is used to tell the firmware what the identify data is of the device that is attached to the port. It is an optional method, and it's ok for it to be missing. Because of this, we always return success from the routine that calls this method, even if the execution fails. Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jeff Garzik (cherry picked from 39aa79e0a1f5f2e28aa341f035940746a98b45b1 commit) commit f84300edf365526b3e4580839ba05ec527473928 Author: Kristen Carlson Accardi Date: Thu Sep 28 11:29:01 2006 -0700 [PATCH] libata: ACPI and _GTF support _GTF is an acpi method that is used to reinitialize the drive. It returns a task file containing ata commands that are sent back to the drive to restore it to boot up defaults. Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jeff Garzik (cherry picked from 9c69cab24b51a89664f4c0dfaf8a436d32117624 commit) commit 91b7ac514ff688e9552feccab6e5f50d7488ee25 Author: Jeff Garzik Date: Fri Dec 1 23:00:32 2006 -0500 [libata sata_promise] support PATA ports on SATA controllers Author: Erik Benada Date: Tue Aug 29 18:07:19 2006 -0400 Add support for PATA port on Promise PDC2037x controllers. I tried to minimize changes to libata code. I just added flags for each port to ata_probe_ent structure and modified ata_host_init() function. Promise SATA driver was changed to use new ata_probe_ent->port_flags, check for presence of PATA port and pdc_phy_reset will use different reset code for PATA and SATA ports. Signed-off-by: Jeff Garzik Documentation/kernel-parameters.txt | 8 drivers/ata/Kconfig | 13 + drivers/ata/Makefile | 2 drivers/ata/libata-acpi.c | 698 +++++++++++++++++++++++++++++++++++ drivers/ata/libata-core.c | 18 + drivers/ata/libata.h | 15 + drivers/ata/sata_promise.c | 35 +- include/linux/libata.h | 6 8 files changed, 785 insertions(+), 10 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index d8323b8..5ea488a 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -48,6 +48,7 @@ parameter is applicable: ISAPNP ISA PnP code is enabled. ISDN Appropriate ISDN support is enabled. JOY Appropriate joystick support is enabled. + LIBATA Libata driver is enabled LP Printer support is enabled. LOOP Loopback device support is enabled. M68k M68k architecture is enabled. @@ -1026,10 +1027,17 @@ and is between 256 and 4096 characters. emulation library even if a 387 maths coprocessor is present. +<<<<<<< HEAD/Documentation/kernel-parameters.txt noaliencache [MM, NUMA] Disables the allcoation of alien caches in the slab allocator. Saves per-node memory, but will impact performance on real NUMA hardware. +======= + noacpi [LIBATA] Disables use of ACPI in libata suspend/resume + when set. + Format: + +>>>>>>> /Documentation/kernel-parameters.txt noalign [KNL,ARM] noapic [SMP,APIC] Tells the kernel to not make use of any diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 984ab28..6fbb09e 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -148,6 +148,19 @@ config SATA_INTEL_COMBINED depends on IDE=y && !BLK_DEV_IDE_SATA && (SATA_AHCI || ATA_PIIX) default y +config SATA_ACPI + bool + depends on ACPI && PCI + default y + help + This option adds support for SATA-related ACPI objects. + These ACPI objects add the ability to retrieve taskfiles + from the ACPI BIOS and write them to the disk controller. + These objects may be related to performance, security, + power management, or other areas. + You can disable this at kernel boot time by using the + option libata.noacpi=1 + config PATA_ALI tristate "ALi PATA support (Experimental)" depends on PCI && EXPERIMENTAL diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index bc3d81a..f91b291 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -63,4 +63,4 @@ # Should be last libata driver obj-$(CONFIG_PATA_LEGACY) += pata_legacy.o libata-objs := libata-core.o libata-scsi.o libata-sff.o libata-eh.o - +libata-$(CONFIG_SATA_ACPI) += libata-acpi.o diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c new file mode 100644 index 0000000..f2fd0dd --- /dev/null +++ b/drivers/ata/libata-acpi.c @@ -0,0 +1,698 @@ +/* + * libata-acpi.c + * Provides ACPI support for PATA/SATA. + * + * Copyright (C) 2006 Intel Corp. + * Copyright (C) 2006 Randy Dunlap + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "libata.h" + +#include +#include +#include +#include +#include +#include +#include + +#define SATA_ROOT_PORT(x) (((x) >> 16) & 0xffff) +#define SATA_PORT_NUMBER(x) ((x) & 0xffff) /* or NO_PORT_MULT */ +#define NO_PORT_MULT 0xffff +#define SATA_ADR_RSVD 0xffffffff + +#define REGS_PER_GTF 7 +struct taskfile_array { + u8 tfa[REGS_PER_GTF]; /* regs. 0x1f1 - 0x1f7 */ +}; + + +/** + * sata_get_dev_handle - finds acpi_handle and PCI device.function + * @dev: device to locate + * @handle: returned acpi_handle for @dev + * @pcidevfn: return PCI device.func for @dev + * + * This function is somewhat SATA-specific. Or at least the + * PATA & SATA versions of this function are different, + * so it's not entirely generic code. + * + * Returns 0 on success, <0 on error. + */ +static int sata_get_dev_handle(struct device *dev, acpi_handle *handle, + acpi_integer *pcidevfn) +{ + struct pci_dev *pci_dev; + acpi_integer addr; + + pci_dev = to_pci_dev(dev); /* NOTE: PCI-specific */ + /* Please refer to the ACPI spec for the syntax of _ADR. */ + addr = (PCI_SLOT(pci_dev->devfn) << 16) | PCI_FUNC(pci_dev->devfn); + *pcidevfn = addr; + *handle = acpi_get_child(DEVICE_ACPI_HANDLE(dev->parent), addr); + if (!*handle) + return -ENODEV; + return 0; +} + +/** + * pata_get_dev_handle - finds acpi_handle and PCI device.function + * @dev: device to locate + * @handle: returned acpi_handle for @dev + * @pcidevfn: return PCI device.func for @dev + * + * The PATA and SATA versions of this function are different. + * + * Returns 0 on success, <0 on error. + */ +static int pata_get_dev_handle(struct device *dev, acpi_handle *handle, + acpi_integer *pcidevfn) +{ + unsigned int bus, devnum, func; + acpi_integer addr; + acpi_handle dev_handle, parent_handle; + struct acpi_buffer buffer = {.length = ACPI_ALLOCATE_BUFFER, + .pointer = NULL}; + acpi_status status; + struct acpi_device_info *dinfo = NULL; + int ret = -ENODEV; + struct pci_dev *pdev = to_pci_dev(dev); + + bus = pdev->bus->number; + devnum = PCI_SLOT(pdev->devfn); + func = PCI_FUNC(pdev->devfn); + + dev_handle = DEVICE_ACPI_HANDLE(dev); + parent_handle = DEVICE_ACPI_HANDLE(dev->parent); + + status = acpi_get_object_info(parent_handle, &buffer); + if (ACPI_FAILURE(status)) + goto err; + + dinfo = buffer.pointer; + if (dinfo && (dinfo->valid & ACPI_VALID_ADR) && + dinfo->address == bus) { + /* ACPI spec for _ADR for PCI bus: */ + addr = (acpi_integer)(devnum << 16 | func); + *pcidevfn = addr; + *handle = dev_handle; + } else { + goto err; + } + + if (!*handle) + goto err; + ret = 0; +err: + kfree(dinfo); + return ret; +} + +struct walk_info { /* can be trimmed some */ + struct device *dev; + struct acpi_device *adev; + acpi_handle handle; + acpi_integer pcidevfn; + unsigned int drivenum; + acpi_handle obj_handle; + struct ata_port *ataport; + struct ata_device *atadev; + u32 sata_adr; + int status; + char basepath[ACPI_PATHNAME_MAX]; + int basepath_len; +}; + +static acpi_status get_devices(acpi_handle handle, + u32 level, void *context, void **return_value) +{ + acpi_status status; + struct walk_info *winfo = context; + struct acpi_buffer namebuf = {ACPI_ALLOCATE_BUFFER, NULL}; + char *pathname; + struct acpi_buffer buffer; + struct acpi_device_info *dinfo; + + status = acpi_get_name(handle, ACPI_FULL_PATHNAME, &namebuf); + if (status) + goto ret; + pathname = namebuf.pointer; + + buffer.length = ACPI_ALLOCATE_BUFFER; + buffer.pointer = NULL; + status = acpi_get_object_info(handle, &buffer); + if (ACPI_FAILURE(status)) + goto out2; + + dinfo = buffer.pointer; + + /* find full device path name for pcidevfn */ + if (dinfo && (dinfo->valid & ACPI_VALID_ADR) && + dinfo->address == winfo->pcidevfn) { + if (ata_msg_probe(winfo->ataport)) + ata_dev_printk(winfo->atadev, KERN_DEBUG, + ":%s: matches pcidevfn (0x%llx)\n", + pathname, winfo->pcidevfn); + strlcpy(winfo->basepath, pathname, + sizeof(winfo->basepath)); + winfo->basepath_len = strlen(pathname); + goto out; + } + + /* if basepath is not yet known, ignore this object */ + if (!winfo->basepath_len) + goto out; + + /* if this object is in scope of basepath, maybe use it */ + if (strncmp(pathname, winfo->basepath, + winfo->basepath_len) == 0) { + if (!(dinfo->valid & ACPI_VALID_ADR)) + goto out; + if (ata_msg_probe(winfo->ataport)) + ata_dev_printk(winfo->atadev, KERN_DEBUG, + "GOT ONE: (%s) root_port = 0x%llx," + " port_num = 0x%llx\n", pathname, + SATA_ROOT_PORT(dinfo->address), + SATA_PORT_NUMBER(dinfo->address)); + /* heuristics: */ + if (SATA_PORT_NUMBER(dinfo->address) != NO_PORT_MULT) + if (ata_msg_probe(winfo->ataport)) + ata_dev_printk(winfo->atadev, + KERN_DEBUG, "warning: don't" + " know how to handle SATA port" + " multiplier\n"); + if (SATA_ROOT_PORT(dinfo->address) == + winfo->ataport->port_no && + SATA_PORT_NUMBER(dinfo->address) == NO_PORT_MULT) { + if (ata_msg_probe(winfo->ataport)) + ata_dev_printk(winfo->atadev, + KERN_DEBUG, + "THIS ^^^^^ is the requested" + " SATA drive (handle = 0x%p)\n", + handle); + winfo->sata_adr = dinfo->address; + winfo->obj_handle = handle; + } + } +out: + kfree(dinfo); +out2: + kfree(pathname); + +ret: + return status; +} + +/* Get the SATA drive _ADR object. */ +static int get_sata_adr(struct device *dev, acpi_handle handle, + acpi_integer pcidevfn, unsigned int drive, + struct ata_port *ap, + struct ata_device *atadev, u32 *dev_adr) +{ + acpi_status status; + struct walk_info *winfo; + int err = -ENOMEM; + + winfo = kzalloc(sizeof(struct walk_info), GFP_KERNEL); + if (!winfo) + goto out; + + winfo->dev = dev; + winfo->atadev = atadev; + winfo->ataport = ap; + if (acpi_bus_get_device(handle, &winfo->adev) < 0) + if (ata_msg_probe(ap)) + ata_dev_printk(winfo->atadev, KERN_DEBUG, + "acpi_bus_get_device failed\n"); + winfo->handle = handle; + winfo->pcidevfn = pcidevfn; + winfo->drivenum = drive; + + status = acpi_get_devices(NULL, get_devices, winfo, NULL); + if (ACPI_FAILURE(status)) { + if (ata_msg_probe(ap)) + ata_dev_printk(winfo->atadev, KERN_DEBUG, + "%s: acpi_get_devices failed\n", + __FUNCTION__); + err = -ENODEV; + } else { + *dev_adr = winfo->sata_adr; + atadev->obj_handle = winfo->obj_handle; + err = 0; + } + kfree(winfo); +out: + return err; +} + +/** + * do_drive_get_GTF - get the drive bootup default taskfile settings + * @ap: the ata_port for the drive + * @ix: target ata_device (drive) index + * @gtf_length: number of bytes of _GTF data returned at @gtf_address + * @gtf_address: buffer containing _GTF taskfile arrays + * + * This applies to both PATA and SATA drives. + * + * The _GTF method has no input parameters. + * It returns a variable number of register set values (registers + * hex 1F1..1F7, taskfiles). + * The is not known in advance, so have ACPI-CA + * allocate the buffer as needed and return it, then free it later. + * + * The returned @gtf_length and @gtf_address are only valid if the + * function return value is 0. + */ +static int do_drive_get_GTF(struct ata_port *ap, int ix, + unsigned int *gtf_length, unsigned long *gtf_address, + unsigned long *obj_loc) +{ + acpi_status status; + acpi_handle dev_handle = NULL; + acpi_handle chan_handle, drive_handle; + acpi_integer pcidevfn = 0; + u32 dev_adr; + struct acpi_buffer output; + union acpi_object *out_obj; + struct device *dev = ap->host->dev; + struct ata_device *atadev = &ap->device[ix]; + int err = -ENODEV; + + *gtf_length = 0; + *gtf_address = 0UL; + *obj_loc = 0UL; + + if (noacpi) + return 0; + + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, + "%s: ENTER: ap->id: %d, port#: %d\n", + __FUNCTION__, ap->id, ap->port_no); + + if (!ata_dev_enabled(atadev) || (ap->flags & ATA_FLAG_DISABLED)) { + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, "%s: ERR: " + "ata_dev_present: %d, PORT_DISABLED: %lu\n", + __FUNCTION__, ata_dev_enabled(atadev), + ap->flags & ATA_FLAG_DISABLED); + goto out; + } + + /* Don't continue if device has no _ADR method. + * _GTF is intended for known motherboard devices. */ + if (!(ap->cbl == ATA_CBL_SATA)) { + err = pata_get_dev_handle(dev, &dev_handle, &pcidevfn); + if (err < 0) { + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, + "%s: pata_get_dev_handle failed (%d)\n", + __FUNCTION__, err); + goto out; + } + } else { + err = sata_get_dev_handle(dev, &dev_handle, &pcidevfn); + if (err < 0) { + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, + "%s: sata_get_dev_handle failed (%d\n", + __FUNCTION__, err); + goto out; + } + } + + /* Get this drive's _ADR info. if not already known. */ + if (!atadev->obj_handle) { + if (!(ap->cbl == ATA_CBL_SATA)) { + /* get child objects of dev_handle == channel objects, + * + _their_ children == drive objects */ + /* channel is ap->port_no */ + chan_handle = acpi_get_child(dev_handle, + ap->port_no); + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, + "%s: chan adr=%d: chan_handle=0x%p\n", + __FUNCTION__, ap->port_no, + chan_handle); + if (!chan_handle) { + err = -ENODEV; + goto out; + } + /* TBD: could also check ACPI object VALID bits */ + drive_handle = acpi_get_child(chan_handle, ix); + if (!drive_handle) { + err = -ENODEV; + goto out; + } + dev_adr = ix; + atadev->obj_handle = drive_handle; + } else { /* for SATA mode */ + dev_adr = SATA_ADR_RSVD; + err = get_sata_adr(dev, dev_handle, pcidevfn, 0, + ap, atadev, &dev_adr); + } + if (err < 0 || dev_adr == SATA_ADR_RSVD || + !atadev->obj_handle) { + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, + "%s: get_sata/pata_adr failed: " + "err=%d, dev_adr=%u, obj_handle=0x%p\n", + __FUNCTION__, err, dev_adr, + atadev->obj_handle); + goto out; + } + } + + /* Setting up output buffer */ + output.length = ACPI_ALLOCATE_BUFFER; + output.pointer = NULL; /* ACPI-CA sets this; save/free it later */ + + /* _GTF has no input parameters */ + err = -EIO; + status = acpi_evaluate_object(atadev->obj_handle, "_GTF", + NULL, &output); + if (ACPI_FAILURE(status)) { + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, + "%s: Run _GTF error: status = 0x%x\n", + __FUNCTION__, status); + goto out; + } + + if (!output.length || !output.pointer) { + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, "%s: Run _GTF: " + "length or ptr is NULL (0x%llx, 0x%p)\n", + __FUNCTION__, + (unsigned long long)output.length, + output.pointer); + kfree(output.pointer); + goto out; + } + + out_obj = output.pointer; + if (out_obj->type != ACPI_TYPE_BUFFER) { + kfree(output.pointer); + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, "%s: Run _GTF: " + "error: expected object type of " + " ACPI_TYPE_BUFFER, got 0x%x\n", + __FUNCTION__, out_obj->type); + err = -ENOENT; + goto out; + } + + if (!out_obj->buffer.length || !out_obj->buffer.pointer || + out_obj->buffer.length % REGS_PER_GTF) { + if (ata_msg_drv(ap)) + ata_dev_printk(atadev, KERN_ERR, + "%s: unexpected GTF length (%d) or addr (0x%p)\n", + __FUNCTION__, out_obj->buffer.length, + out_obj->buffer.pointer); + err = -ENOENT; + goto out; + } + + *gtf_length = out_obj->buffer.length; + *gtf_address = (unsigned long)out_obj->buffer.pointer; + *obj_loc = (unsigned long)out_obj; + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, "%s: returning " + "gtf_length=%d, gtf_address=0x%lx, obj_loc=0x%lx\n", + __FUNCTION__, *gtf_length, *gtf_address, *obj_loc); + err = 0; +out: + return err; +} + +/** + * taskfile_load_raw - send taskfile registers to host controller + * @ap: Port to which output is sent + * @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7) + * + * Outputs ATA taskfile to standard ATA host controller using MMIO + * or PIO as indicated by the ATA_FLAG_MMIO flag. + * Writes the control, feature, nsect, lbal, lbam, and lbah registers. + * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect, + * hob_lbal, hob_lbam, and hob_lbah. + * + * This function waits for idle (!BUSY and !DRQ) after writing + * registers. If the control register has a new value, this + * function also waits for idle after writing control and before + * writing the remaining registers. + * + * LOCKING: TBD: + * Inherited from caller. + */ +static void taskfile_load_raw(struct ata_port *ap, + struct ata_device *atadev, + const struct taskfile_array *gtf) +{ + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, "%s: (0x1f1-1f7): hex: " + "%02x %02x %02x %02x %02x %02x %02x\n", + __FUNCTION__, + gtf->tfa[0], gtf->tfa[1], gtf->tfa[2], + gtf->tfa[3], gtf->tfa[4], gtf->tfa[5], gtf->tfa[6]); + + if ((gtf->tfa[0] == 0) && (gtf->tfa[1] == 0) && (gtf->tfa[2] == 0) + && (gtf->tfa[3] == 0) && (gtf->tfa[4] == 0) && (gtf->tfa[5] == 0) + && (gtf->tfa[6] == 0)) + return; + + if (ap->ops->qc_issue) { + struct ata_taskfile tf; + unsigned int err; + + ata_tf_init(atadev, &tf); + + /* convert gtf to tf */ + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; /* TBD */ + tf.protocol = atadev->class == ATA_DEV_ATAPI ? + ATA_PROT_ATAPI_NODATA : ATA_PROT_NODATA; + tf.feature = gtf->tfa[0]; /* 0x1f1 */ + tf.nsect = gtf->tfa[1]; /* 0x1f2 */ + tf.lbal = gtf->tfa[2]; /* 0x1f3 */ + tf.lbam = gtf->tfa[3]; /* 0x1f4 */ + tf.lbah = gtf->tfa[4]; /* 0x1f5 */ + tf.device = gtf->tfa[5]; /* 0x1f6 */ + tf.command = gtf->tfa[6]; /* 0x1f7 */ + + err = ata_exec_internal(atadev, &tf, NULL, DMA_NONE, NULL, 0); + if (err && ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_ERR, + "%s: ata_exec_internal failed: %u\n", + __FUNCTION__, err); + } else + if (ata_msg_warn(ap)) + ata_dev_printk(atadev, KERN_WARNING, + "%s: SATA driver is missing qc_issue function" + " entry points\n", + __FUNCTION__); +} + +/** + * do_drive_set_taskfiles - write the drive taskfile settings from _GTF + * @ap: the ata_port for the drive + * @atadev: target ata_device + * @gtf_length: total number of bytes of _GTF taskfiles + * @gtf_address: location of _GTF taskfile arrays + * + * This applies to both PATA and SATA drives. + * + * Write {gtf_address, length gtf_length} in groups of + * REGS_PER_GTF bytes. + */ +static int do_drive_set_taskfiles(struct ata_port *ap, + struct ata_device *atadev, unsigned int gtf_length, + unsigned long gtf_address) +{ + int err = -ENODEV; + int gtf_count = gtf_length / REGS_PER_GTF; + int ix; + struct taskfile_array *gtf; + + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, + "%s: ENTER: ap->id: %d, port#: %d\n", + __FUNCTION__, ap->id, ap->port_no); + + if (noacpi || !(ap->cbl == ATA_CBL_SATA)) + return 0; + + if (!ata_dev_enabled(atadev) || (ap->flags & ATA_FLAG_DISABLED)) + goto out; + if (!gtf_count) /* shouldn't be here */ + goto out; + + if (gtf_length % REGS_PER_GTF) { + if (ata_msg_drv(ap)) + ata_dev_printk(atadev, KERN_ERR, + "%s: unexpected GTF length (%d)\n", + __FUNCTION__, gtf_length); + goto out; + } + + for (ix = 0; ix < gtf_count; ix++) { + gtf = (struct taskfile_array *) + (gtf_address + ix * REGS_PER_GTF); + + /* send all TaskFile registers (0x1f1-0x1f7) *in*that*order* */ + taskfile_load_raw(ap, atadev, gtf); + } + + err = 0; +out: + return err; +} + +/** + * ata_acpi_exec_tfs - get then write drive taskfile settings + * @ap: the ata_port for the drive + * + * This applies to both PATA and SATA drives. + */ +int ata_acpi_exec_tfs(struct ata_port *ap) +{ + int ix; + int ret =0; + unsigned int gtf_length; + unsigned long gtf_address; + unsigned long obj_loc; + + if (noacpi) + return 0; + + for (ix = 0; ix < ATA_MAX_DEVICES; ix++) { + if (!ata_dev_enabled(&ap->device[ix])) + continue; + + ret = do_drive_get_GTF(ap, ix, + >f_length, >f_address, &obj_loc); + if (ret < 0) { + if (ata_msg_probe(ap)) + ata_port_printk(ap, KERN_DEBUG, + "%s: get_GTF error (%d)\n", + __FUNCTION__, ret); + break; + } + + ret = do_drive_set_taskfiles(ap, &ap->device[ix], + gtf_length, gtf_address); + kfree((void *)obj_loc); + if (ret < 0) { + if (ata_msg_probe(ap)) + ata_port_printk(ap, KERN_DEBUG, + "%s: set_taskfiles error (%d)\n", + __FUNCTION__, ret); + break; + } + } + + return ret; +} + +/** + * ata_acpi_push_id - send Identify data to drive + * @ap: the ata_port for the drive + * @ix: drive index + * + * _SDD ACPI object: for SATA mode only + * Must be after Identify (Packet) Device -- uses its data + * ATM this function never returns a failure. It is an optional + * method and if it fails for whatever reason, we should still + * just keep going. + */ +int ata_acpi_push_id(struct ata_port *ap, unsigned int ix) +{ + acpi_handle handle; + acpi_integer pcidevfn; + int err; + struct device *dev = ap->host->dev; + struct ata_device *atadev = &ap->device[ix]; + u32 dev_adr; + acpi_status status; + struct acpi_object_list input; + union acpi_object in_params[1]; + + if (noacpi) + return 0; + + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, + "%s: ap->id: %d, ix = %d, port#: %d\n", + __FUNCTION__, ap->id, ix, ap->port_no); + + /* Don't continue if not a SATA device. */ + if (!(ap->cbl == ATA_CBL_SATA)) { + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, + "%s: Not a SATA device\n", __FUNCTION__); + goto out; + } + + /* Don't continue if device has no _ADR method. + * _SDD is intended for known motherboard devices. */ + err = sata_get_dev_handle(dev, &handle, &pcidevfn); + if (err < 0) { + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, + "%s: sata_get_dev_handle failed (%d\n", + __FUNCTION__, err); + goto out; + } + + /* Get this drive's _ADR info, if not already known */ + if (!atadev->obj_handle) { + dev_adr = SATA_ADR_RSVD; + err = get_sata_adr(dev, handle, pcidevfn, ix, ap, atadev, + &dev_adr); + if (err < 0 || dev_adr == SATA_ADR_RSVD || + !atadev->obj_handle) { + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, + "%s: get_sata_adr failed: " + "err=%d, dev_adr=%u, obj_handle=0x%p\n", + __FUNCTION__, err, dev_adr, + atadev->obj_handle); + goto out; + } + } + + /* Give the drive Identify data to the drive via the _SDD method */ + /* _SDD: set up input parameters */ + input.count = 1; + input.pointer = in_params; + in_params[0].type = ACPI_TYPE_BUFFER; + in_params[0].buffer.length = sizeof(atadev->id[0] * ATA_ID_WORDS); + in_params[0].buffer.pointer = (u8 *)atadev->id; + /* Output buffer: _SDD has no output */ + + /* It's OK for _SDD to be missing too. */ + swap_buf_le16(atadev->id, ATA_ID_WORDS); + status = acpi_evaluate_object(atadev->obj_handle, "_SDD", &input, NULL); + swap_buf_le16(atadev->id, ATA_ID_WORDS); + + err = ACPI_FAILURE(status) ? -EIO : 0; + if (err < 0) { + if (ata_msg_probe(ap)) + ata_dev_printk(atadev, KERN_DEBUG, + "ata%u(%u): %s _SDD error: status = 0x%x\n", + ap->id, ap->device->devno, + __FUNCTION__, status); + } + + /* always return success */ +out: + return 0; +} + + diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 011c0a8..f15c840 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -90,6 +90,10 @@ static int ata_probe_timeout = ATA_TMOUT module_param(ata_probe_timeout, int, 0444); MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)"); +int noacpi; +module_param(noacpi, int, 0444); +MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in suspend/resume when set"); + MODULE_AUTHOR("Jeff Garzik"); MODULE_DESCRIPTION("Library module for ATA devices"); MODULE_LICENSE("GPL"); @@ -1614,6 +1618,16 @@ int ata_dev_configure(struct ata_device ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n", __FUNCTION__, ap->id, dev->devno); + /* set _SDD */ + rc = ata_acpi_push_id(ap, dev->devno); + if (rc) { + ata_dev_printk(dev, KERN_WARNING, "failed to set _SDD(%d)\n", + rc); + } + + /* retrieve and execute the ATA task file of _GTF */ + ata_acpi_exec_tfs(ap); + /* print device capabilities */ if (ata_msg_probe(ap)) ata_dev_printk(dev, KERN_DEBUG, @@ -5613,13 +5627,13 @@ void ata_port_init(struct ata_port *ap, ap->pio_mask = ent->pinfo2->pio_mask; ap->mwdma_mask = ent->pinfo2->mwdma_mask; ap->udma_mask = ent->pinfo2->udma_mask; - ap->flags |= ent->pinfo2->flags; + ap->flags |= ent->pinfo2->flags | ent->_port_flags[port_no]; ap->ops = ent->pinfo2->port_ops; } else { ap->pio_mask = ent->pio_mask; ap->mwdma_mask = ent->mwdma_mask; ap->udma_mask = ent->udma_mask; - ap->flags |= ent->port_flags; + ap->flags |= ent->port_flags | ent->_port_flags[port_no]; ap->ops = ent->port_ops; } ap->hw_sata_spd_limit = UINT_MAX; diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 81ae41d..d91ac92 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -48,6 +48,7 @@ extern struct workqueue_struct *ata_aux_ extern int atapi_enabled; extern int atapi_dmadir; extern int libata_fua; +extern int noacpi; extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev); extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, u64 block, u32 n_block, unsigned int tf_flags, @@ -88,6 +89,20 @@ extern void ata_port_init(struct ata_por extern struct ata_probe_ent *ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port); +/* libata-acpi.c */ +#ifdef CONFIG_SATA_ACPI +extern int ata_acpi_exec_tfs(struct ata_port *ap); +extern int ata_acpi_push_id(struct ata_port *ap, unsigned int ix); +#else +static inline int ata_acpi_exec_tfs(struct ata_port *ap) +{ + return 0; +} +static inline int ata_acpi_push_id(struct ata_port *ap, unsigned int ix) +{ + return 0; +} +#endif /* libata-scsi.c */ extern struct scsi_transport_template ata_scsi_transport_template; diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index f055874..ff0ebc0 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -183,7 +183,7 @@ static const struct ata_port_info pdc_po /* board_2037x */ { .sht = &pdc_ata_sht, - .flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA, + .flags = PDC_COMMON_FLAGS /* | ATA_FLAG_SATA */, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ @@ -356,17 +356,18 @@ static void pdc_reset_port(struct ata_po static void pdc_pata_cbl_detect(struct ata_port *ap) { u8 tmp; - void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr + PDC_CTLSTAT + 0x03; + void __iomem *mmio = + (void __iomem *) ap->ioaddr.cmd_addr + PDC_CTLSTAT + 0x03; tmp = readb(mmio); - + if (tmp & 0x01) { ap->cbl = ATA_CBL_PATA40; ap->udma_mask &= ATA_UDMA_MASK_40C; } else ap->cbl = ATA_CBL_PATA80; } - + static void pdc_pata_phy_reset(struct ata_port *ap) { pdc_pata_cbl_detect(ap); @@ -377,7 +378,7 @@ static void pdc_pata_phy_reset(struct at static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) { - if (sc_reg > SCR_CONTROL) + if ((sc_reg > SCR_CONTROL) || (ap->flags & ATA_FLAG_SLAVE_POSS)) return 0xffffffffU; return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } @@ -386,7 +387,7 @@ static u32 pdc_sata_scr_read (struct ata static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) { - if (sc_reg > SCR_CONTROL) + if ((sc_reg > SCR_CONTROL) || (ap->flags & ATA_FLAG_SLAVE_POSS)) return; writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } @@ -740,6 +741,7 @@ static int pdc_ata_init_one (struct pci_ unsigned int board_idx = (unsigned int) ent->driver_data; int pci_dev_busy = 0; int rc; + u8 tmp; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); @@ -802,6 +804,9 @@ static int pdc_ata_init_one (struct pci_ probe_ent->port[0].scr_addr = base + 0x400; probe_ent->port[1].scr_addr = base + 0x500; + probe_ent->_port_flags[0] = ATA_FLAG_SATA; + probe_ent->_port_flags[1] = ATA_FLAG_SATA; + /* notice 4-port boards */ switch (board_idx) { case board_40518: @@ -815,12 +820,28 @@ static int pdc_ata_init_one (struct pci_ probe_ent->port[2].scr_addr = base + 0x600; probe_ent->port[3].scr_addr = base + 0x700; + + probe_ent->_port_flags[2] = ATA_FLAG_SATA; + probe_ent->_port_flags[3] = ATA_FLAG_SATA; break; case board_2057x: hp->flags |= PDC_FLAG_GEN_II; /* Fall through */ case board_2037x: - probe_ent->n_ports = 2; + /* Some boards have also PATA port */ + tmp = readb(mmio_base + PDC_FLASH_CTL+1); + if (!(tmp & 0x80)) + { + probe_ent->n_ports = 3; + + pdc_ata_setup_port(&probe_ent->port[2], base + 0x300); + + probe_ent->_port_flags[2] = ATA_FLAG_SLAVE_POSS; + + printk(KERN_INFO DRV_NAME " PATA port found\n"); + } + else + probe_ent->n_ports = 2; break; case board_20619: probe_ent->n_ports = 4; diff --git a/include/linux/libata.h b/include/linux/libata.h index ab27548..68417e0 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -35,6 +35,7 @@ #include #include #include #include +#include /* * Define if arch has non-standard setup. This is a _PCI_ standard @@ -384,6 +385,7 @@ struct ata_probe_ent { unsigned int irq_flags; unsigned long port_flags; unsigned long _host_flags; + unsigned long _port_flags[ATA_MAX_PORTS]; void __iomem *mmio_base; void *private_data; @@ -502,6 +504,10 @@ struct ata_device { /* error history */ struct ata_ering ering; unsigned int horkage; /* List of broken features */ +#ifdef CONFIG_SATA_ACPI + /* ACPI objects info */ + acpi_handle obj_handle; +#endif }; /* Offset into struct ata_device. Fields above it are maintained