GIT 91614c054c9ffc26b47a5cb3135113aa0f6e6ff0 git+ssh://master.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git commit Author: Kai Makisara Date: Fri Jan 26 00:38:39 2007 +0200 [SCSI] st: A MTIOCTOP/MTWEOF within the early warning will cause the file number to be incorrect On Wed, 24 Jan 2007, Andrew Morton wrote: > On Mon, 22 Jan 2007 13:07:20 -0800 > bugme-daemon@bugzilla.kernel.org wrote: > > > http://bugzilla.kernel.org/show_bug.cgi?id=7864 > > > > Summary: A MTIOCTOP/MTWEOF within the early warning will cause > > the file number to be incorrect > > Kernel Version: 2.6.19.2 > > Status: NEW > > Severity: low > > Owner: io_scsi@kernel-bugs.osdl.org > > Submitter: ce_reisinger@yahoo.com > > > > > > Write records to a SCSI tape until a write fails with a ENOSPC (you have reached > > early warning. > > Now perform a: > > struct mtget before, after; > > ioctl(fd, MTIOCGET, &before); > > struct mtop mtop = { MTWEOF, 1 }; > > ioctl(fd, MTIOCTOP, &mtop); > > ioctl(fd, MTIOCGET, &after); > > > > Check the value of mt_fileno in the before and after structures. Notice the > > after is 2 greater then the before. > > > > The problem appears to be in the block of code starting at line 2817 in st.c. > > This block is entered because the drive did return a CHECK CONDITION with NO > > SENSE and the SENSE_EOM bit set. At lines 2824/5 the fileno is incremented. But > > it has already been increased by the number of filemarks requested by the > > MTIOCTOP. I believe that the residue count in the sense data should be > > subtracted from fileno, not a increment as is done. > > > > Thanks. Could you please send us a tested patch to fix these things, as > per http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt ? > The analysis is basically correct and explains the bug. According to the SCSI standards, the sense code is NO SENSE or RECOVERED ERROR in case writing filemark(s) succeeds. If it fails (partly or completely) the sense code is VOLUME OVERFLOW. The patch below is tested to fix the case when one filemark is successfully written after the EOM early warning. It should also fix the case at real EOM but this has not been tested. Carl, thanks for reporting the bug and providing the analysis for the fix. Signed-off-by: Kai Makisara Signed-off-by: James Bottomley commit 477ffb9d8732f30e7ab2d20f6ed0c22bad37a4a5 Author: David C Somayajulu Date: Mon Jan 22 12:26:11 2007 -0800 [SCSI] qla4xxx: bug fixes The included patch fixes the following issues: 1. qla3xxx/qla4xxx co-existence issue which can result in a lockup when qla3xxx driver is unloaded, or when ifdown; ifup is performed on one of the interfaces correponding to qla3xxx. This is because qla4xxx HBA supports one ethernet and iscsi interfaces per port. Both iscsi and ethernet interfaces share the same state machine. The problem has to do with synchronizing access to the state machine in the event of a reset 2. mutex_lock() is sometimes not followed by mutex_unlock() prior to invoking a msleep() in qla4xxx_mailbox_command() Signed-off-by: James Bottomley commit 938e2ac0b7ac72d264783b0b548eb6078c295294 Author: Matthew Wilcox Date: Mon Jan 15 18:07:09 2007 -0700 [SCSI] Fix scsi_add_device() for async scanning I had thought that all drivers which didn't call scsi_scan_host() called scsi_scan_target(). Some, such as sbp2, mptsas and libata-scsi, call scsi_add_device() or __scsi_add_device(). We just need to wait for the currently executing async scans to complete first. This is the same code that's in scsi_scan_target(), except that we have to return an error instead of void when we're declining to scan at all. Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley drivers/scsi/qla4xxx/ql4_def.h | 1 - drivers/scsi/qla4xxx/ql4_glbl.h | 1 + drivers/scsi/qla4xxx/ql4_init.c | 18 +++++----- drivers/scsi/qla4xxx/ql4_isr.c | 4 +- drivers/scsi/qla4xxx/ql4_mbx.c | 35 ++++++++++++-------- drivers/scsi/qla4xxx/ql4_os.c | 64 ++++++++++++++++++++++-------------- drivers/scsi/qla4xxx/ql4_version.h | 2 + drivers/scsi/scsi_scan.c | 6 +++ drivers/scsi/st.c | 19 ++++++----- 9 files changed, 90 insertions(+), 60 deletions(-) diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index 4249e52..6f4cf2d 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -418,7 +418,6 @@ #define MEM_ALIGN_VALUE \ * concurrently. */ struct mutex mbox_sem; - wait_queue_head_t mailbox_wait_queue; /* temporary mailbox status registers */ volatile uint8_t mbox_status_count; diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h index 2122967..e021eb5 100644 --- a/drivers/scsi/qla4xxx/ql4_glbl.h +++ b/drivers/scsi/qla4xxx/ql4_glbl.h @@ -76,4 +76,5 @@ int qla4xxx_process_ddb_changed(struct s extern int ql4xextended_error_logging; extern int ql4xdiscoverywait; extern int ql4xdontresethba; +extern int ql4_mod_unload; #endif /* _QLA4x_GBL_H */ diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index cc210f2..b907b06 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -958,25 +958,25 @@ static int qla4xxx_start_firmware_from_f return status; } -int ql4xxx_lock_drvr_wait(struct scsi_qla_host *a) +int ql4xxx_lock_drvr_wait(struct scsi_qla_host *ha) { -#define QL4_LOCK_DRVR_WAIT 300 -#define QL4_LOCK_DRVR_SLEEP 100 +#define QL4_LOCK_DRVR_WAIT 30 +#define QL4_LOCK_DRVR_SLEEP 1 int drvr_wait = QL4_LOCK_DRVR_WAIT; while (drvr_wait) { - if (ql4xxx_lock_drvr(a) == 0) { - msleep(QL4_LOCK_DRVR_SLEEP); + if (ql4xxx_lock_drvr(ha) == 0) { + ssleep(QL4_LOCK_DRVR_SLEEP); if (drvr_wait) { DEBUG2(printk("scsi%ld: %s: Waiting for " - "Global Init Semaphore...n", - a->host_no, - __func__)); + "Global Init Semaphore(%d)...n", + ha->host_no, + __func__, drvr_wait)); } drvr_wait -= QL4_LOCK_DRVR_SLEEP; } else { DEBUG2(printk("scsi%ld: %s: Global Init Semaphore " - "acquired.n", a->host_no, __func__)); + "acquired.n", ha->host_no, __func__)); return QLA_SUCCESS; } } diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c index ef975e0..35b9e36 100644 --- a/drivers/scsi/qla4xxx/ql4_isr.c +++ b/drivers/scsi/qla4xxx/ql4_isr.c @@ -433,7 +433,6 @@ static void qla4xxx_isr_decode_mailbox(s readl(&ha->reg->mailbox[i]); set_bit(AF_MBOX_COMMAND_DONE, &ha->flags); - wake_up(&ha->mailbox_wait_queue); } } else if (mbox_status >> 12 == MBOX_ASYNC_EVENT_STATUS) { /* Immediately process the AENs that don't require much work. @@ -686,7 +685,8 @@ irqreturn_t qla4xxx_intr_handler(int irq &ha->reg->ctrl_status); readl(&ha->reg->ctrl_status); - set_bit(DPC_RESET_HA_INTR, &ha->dpc_flags); + if (!ql4_mod_unload) + set_bit(DPC_RESET_HA_INTR, &ha->dpc_flags); break; } else if (intr_status & INTR_PENDING) { diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index b721dc5..7f28657 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -29,18 +29,30 @@ int qla4xxx_mailbox_command(struct scsi_ u_long wait_count; uint32_t intr_status; unsigned long flags = 0; - DECLARE_WAITQUEUE(wait, current); - - mutex_lock(&ha->mbox_sem); - - /* Mailbox code active */ - set_bit(AF_MBOX_COMMAND, &ha->flags); /* Make sure that pointers are valid */ if (!mbx_cmd || !mbx_sts) { DEBUG2(printk("scsi%ld: %s: Invalid mbx_cmd or mbx_sts " "pointer\n", ha->host_no, __func__)); - goto mbox_exit; + return status; + } + /* Mailbox code active */ + wait_count = MBOX_TOV * 100; + + while (wait_count--) { + mutex_lock(&ha->mbox_sem); + if (!test_bit(AF_MBOX_COMMAND, &ha->flags)) { + set_bit(AF_MBOX_COMMAND, &ha->flags); + mutex_unlock(&ha->mbox_sem); + break; + } + mutex_unlock(&ha->mbox_sem); + if (!wait_count) { + DEBUG2(printk("scsi%ld: %s: mbox_sem failed\n", + ha->host_no, __func__)); + return status; + } + msleep(10); } /* To prevent overwriting mailbox registers for a command that has @@ -73,8 +85,6 @@ int qla4xxx_mailbox_command(struct scsi_ spin_unlock_irqrestore(&ha->hardware_lock, flags); /* Wait for completion */ - set_current_state(TASK_UNINTERRUPTIBLE); - add_wait_queue(&ha->mailbox_wait_queue, &wait); /* * If we don't want status, don't wait for the mailbox command to @@ -83,8 +93,6 @@ int qla4xxx_mailbox_command(struct scsi_ */ if (outCount == 0) { status = QLA_SUCCESS; - set_current_state(TASK_RUNNING); - remove_wait_queue(&ha->mailbox_wait_queue, &wait); goto mbox_exit; } /* Wait for command to complete */ @@ -108,8 +116,6 @@ int qla4xxx_mailbox_command(struct scsi_ spin_unlock_irqrestore(&ha->hardware_lock, flags); msleep(10); } - set_current_state(TASK_RUNNING); - remove_wait_queue(&ha->mailbox_wait_queue, &wait); /* Check for mailbox timeout. */ if (!test_bit(AF_MBOX_COMMAND_DONE, &ha->flags)) { @@ -155,9 +161,10 @@ int qla4xxx_mailbox_command(struct scsi_ spin_unlock_irqrestore(&ha->hardware_lock, flags); mbox_exit: + mutex_lock(&ha->mbox_sem); clear_bit(AF_MBOX_COMMAND, &ha->flags); - clear_bit(AF_MBOX_COMMAND_DONE, &ha->flags); mutex_unlock(&ha->mbox_sem); + clear_bit(AF_MBOX_COMMAND_DONE, &ha->flags); return status; } diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 9ef693c..81fb7bd 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -40,6 +40,8 @@ MODULE_PARM_DESC(ql4xextended_error_logg "Option to enable extended error logging, " "Default is 0 - no logging, 1 - debug logging"); +int ql4_mod_unload = 0; + /* * SCSI host template entry points */ @@ -422,6 +424,9 @@ static int qla4xxx_queuecommand(struct s goto qc_host_busy; } + if (test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags)) + goto qc_host_busy; + spin_unlock_irq(ha->host->host_lock); srb = qla4xxx_get_new_srb(ha, ddb_entry, cmd, done); @@ -707,16 +712,12 @@ static int qla4xxx_cmd_wait(struct scsi_ return stat; } -/** - * qla4xxx_soft_reset - performs soft reset. - * @ha: Pointer to host adapter structure. - **/ -int qla4xxx_soft_reset(struct scsi_qla_host *ha) +static void qla4xxx_hw_reset(struct scsi_qla_host *ha) { - uint32_t max_wait_time; - unsigned long flags = 0; - int status = QLA_ERROR; uint32_t ctrl_status; + unsigned long flags = 0; + + DEBUG2(printk(KERN_ERR "scsi%ld: %s\n", ha->host_no, __func__)); spin_lock_irqsave(&ha->hardware_lock, flags); @@ -733,6 +734,20 @@ int qla4xxx_soft_reset(struct scsi_qla_h readl(&ha->reg->ctrl_status); spin_unlock_irqrestore(&ha->hardware_lock, flags); +} + +/** + * qla4xxx_soft_reset - performs soft reset. + * @ha: Pointer to host adapter structure. + **/ +int qla4xxx_soft_reset(struct scsi_qla_host *ha) +{ + uint32_t max_wait_time; + unsigned long flags = 0; + int status = QLA_ERROR; + uint32_t ctrl_status; + + qla4xxx_hw_reset(ha); /* Wait until the Network Reset Intr bit is cleared */ max_wait_time = RESET_INTR_TOV; @@ -966,10 +981,12 @@ static void qla4xxx_do_dpc(struct work_s struct scsi_qla_host *ha = container_of(work, struct scsi_qla_host, dpc_work); struct ddb_entry *ddb_entry, *dtemp; + int status = QLA_ERROR; DEBUG2(printk("scsi%ld: %s: DPC handler waking up." - "flags = 0x%08lx, dpc_flags = 0x%08lx\n", - ha->host_no, __func__, ha->flags, ha->dpc_flags)); + "flags = 0x%08lx, dpc_flags = 0x%08lx ctrl_stat = 0x%08x\n", + ha->host_no, __func__, ha->flags, ha->dpc_flags, + readw(&ha->reg->ctrl_status))); /* Initialization not yet finished. Don't do anything yet. */ if (!test_bit(AF_INIT_DONE, &ha->flags)) @@ -983,31 +1000,28 @@ static void qla4xxx_do_dpc(struct work_s test_bit(DPC_RESET_HA, &ha->dpc_flags)) qla4xxx_recover_adapter(ha, PRESERVE_DDB_LIST); - if (test_and_clear_bit(DPC_RESET_HA_INTR, &ha->dpc_flags)) { + if (test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags)) { uint8_t wait_time = RESET_INTR_TOV; - unsigned long flags = 0; - - qla4xxx_flush_active_srbs(ha); - spin_lock_irqsave(&ha->hardware_lock, flags); while ((readw(&ha->reg->ctrl_status) & (CSR_SOFT_RESET | CSR_FORCE_SOFT_RESET)) != 0) { if (--wait_time == 0) break; - - spin_unlock_irqrestore(&ha->hardware_lock, - flags); - msleep(1000); - - spin_lock_irqsave(&ha->hardware_lock, flags); } - spin_unlock_irqrestore(&ha->hardware_lock, flags); - if (wait_time == 0) DEBUG2(printk("scsi%ld: %s: SR|FSR " "bit not cleared-- resetting\n", ha->host_no, __func__)); + qla4xxx_flush_active_srbs(ha); + if (ql4xxx_lock_drvr_wait(ha) == QLA_SUCCESS) { + qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS); + status = qla4xxx_initialize_adapter(ha, + PRESERVE_DDB_LIST); + } + clear_bit(DPC_RESET_HA_INTR, &ha->dpc_flags); + if (status == QLA_SUCCESS) + qla4xxx_enable_intrs(ha); } } @@ -1062,7 +1076,7 @@ static void qla4xxx_free_adapter(struct /* Issue Soft Reset to put firmware in unknown state */ if (ql4xxx_lock_drvr_wait(ha) == QLA_SUCCESS) - qla4xxx_soft_reset(ha); + qla4xxx_hw_reset(ha); /* Remove timer thread, if present */ if (ha->timer_active) @@ -1198,7 +1212,6 @@ static int __devinit qla4xxx_probe_adapt INIT_LIST_HEAD(&ha->free_srb_q); mutex_init(&ha->mbox_sem); - init_waitqueue_head(&ha->mailbox_wait_queue); spin_lock_init(&ha->hardware_lock); @@ -1665,6 +1678,7 @@ no_srp_cache: static void __exit qla4xxx_module_exit(void) { + ql4_mod_unload = 1; pci_unregister_driver(&qla4xxx_pci_driver); iscsi_unregister_transport(&qla4xxx_iscsi_transport); kmem_cache_destroy(srb_cachep); diff --git a/drivers/scsi/qla4xxx/ql4_version.h b/drivers/scsi/qla4xxx/ql4_version.h index 454e19c..e5183a6 100644 --- a/drivers/scsi/qla4xxx/ql4_version.h +++ b/drivers/scsi/qla4xxx/ql4_version.h @@ -5,4 +5,4 @@ * See LICENSE.qla4xxx for copyright and licensing details. */ -#define QLA4XXX_DRIVER_VERSION "5.00.07-k" +#define QLA4XXX_DRIVER_VERSION "5.00.07-k1" diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index b83d03c..96b7cbd 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -1453,6 +1453,12 @@ struct scsi_device *__scsi_add_device(st struct device *parent = &shost->shost_gendev; struct scsi_target *starget; + if (strncmp(scsi_scan_type, "none", 4) == 0) + return ERR_PTR(-ENODEV); + + if (!shost->async_scan) + scsi_complete_async_scans(); + starget = scsi_alloc_target(parent, channel, id); if (!starget) return ERR_PTR(-ENOMEM); diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index e016e09..488ec79 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -2816,15 +2816,18 @@ static int st_int_ioctl(struct scsi_tape if (cmd_in == MTWEOF && cmdstatp->have_sense && - (cmdstatp->flags & SENSE_EOM) && - (cmdstatp->sense_hdr.sense_key == NO_SENSE || - cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) && - undone == 0) { - ioctl_result = 0; /* EOF written successfully at EOM */ - if (fileno >= 0) - fileno++; + (cmdstatp->flags & SENSE_EOM)) { + if (cmdstatp->sense_hdr.sense_key == NO_SENSE || + cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) { + ioctl_result = 0; /* EOF(s) written successfully at EOM */ + STps->eof = ST_NOEOF; + } else { /* Writing EOF(s) failed */ + if (fileno >= 0) + fileno -= undone; + if (undone < arg) + STps->eof = ST_NOEOF; + } STps->drv_file = fileno; - STps->eof = ST_NOEOF; } else if ((cmd_in == MTFSF) || (cmd_in == MTFSFM)) { if (fileno >= 0) STps->drv_file = fileno - undone;