Subject: hwmon: Only call vid_which_vrm() when needed Some hardware monitoring drivers create the VID/VRM interface files conditionally depending on the chip model or configuration. We should only call vid_which_vrm() when we are actually going to create the files. Not only it is more logical and efficient that way, but it also prevents printing unnecessary warnings such as the one reported here: http://lists.lm-sensors.org/pipermail/lm-sensors/2007-February/018954.html Signed-off-by: Jean Delvare --- drivers/hwmon/lm87.c | 2 +- drivers/hwmon/w83627hf.c | 9 +++++---- 2 files changed, 6 insertions(+), 5 deletions(-) --- linux-2.6.21-rc1.orig/drivers/hwmon/w83627hf.c 2007-02-25 15:53:06.000000000 +0100 +++ linux-2.6.21-rc1/drivers/hwmon/w83627hf.c 2007-02-27 17:52:49.000000000 +0100 @@ -1181,12 +1181,16 @@ static int w83627hf_detect(struct i2c_ad &dev_attr_temp3_type))) goto ERROR4; - if (kind != w83697hf && data->vid != 0xff) + if (kind != w83697hf && data->vid != 0xff) { + /* Convert VID to voltage based on VRM */ + data->vrm = vid_which_vrm(); + if ((err = device_create_file(&new_client->dev, &dev_attr_cpu0_vid)) || (err = device_create_file(&new_client->dev, &dev_attr_vrm))) goto ERROR4; + } if (kind == w83627thf || kind == w83637hf || kind == w83687thf) if ((err = device_create_file(&new_client->dev, @@ -1420,9 +1424,6 @@ static void w83627hf_init_client(struct w83627hf_read_value(client, W83627THF_REG_VRM_OVT_CFG); } - /* Convert VID to voltage based on VRM */ - data->vrm = vid_which_vrm(); - tmp = w83627hf_read_value(client, W83781D_REG_SCFG1); for (i = 1; i <= 3; i++) { if (!(tmp & BIT_SCFG1[i - 1])) { --- linux-2.6.21-rc1.orig/drivers/hwmon/lm87.c 2007-02-09 09:17:47.000000000 +0100 +++ linux-2.6.21-rc1/drivers/hwmon/lm87.c 2007-02-27 18:10:10.000000000 +0100 @@ -747,6 +747,7 @@ static int lm87_detect(struct i2c_adapte } if (!(data->channel & CHAN_NO_VID)) { + data->vrm = vid_which_vrm(); if ((err = device_create_file(&new_client->dev, &dev_attr_cpu0_vid)) || (err = device_create_file(&new_client->dev, @@ -779,7 +780,6 @@ static void lm87_init_client(struct i2c_ u8 config; data->channel = lm87_read_value(client, LM87_REG_CHANNEL_MODE); - data->vrm = vid_which_vrm(); config = lm87_read_value(client, LM87_REG_CONFIG); if (!(config & 0x01)) {