From: Alan Cox - Fix theoretical pdc2027x crash if the BIOS didn't assign BAR4 for DMA. (Needs a default modefilter) - Use cable methods - Replace post_set_mode() use with wrapped set_mode() [Removes last use of post_set_mode] - Mode filter Maxtor UDMA133 rule Signed-off-by: Alan Cox Signed-off-by: Andrew Morton --- drivers/ata/pata_pdc2027x.c | 60 ++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 13 deletions(-) diff -puN drivers/ata/pata_pdc2027x.c~pata_pdc2027x-bring-into-line-with-changes-add-the-mode drivers/ata/pata_pdc2027x.c --- a/drivers/ata/pata_pdc2027x.c~pata_pdc2027x-bring-into-line-with-changes-add-the-mode +++ a/drivers/ata/pata_pdc2027x.c @@ -35,7 +35,7 @@ #include #define DRV_NAME "pata_pdc2027x" -#define DRV_VERSION "0.8" +#define DRV_VERSION "0.9" #undef PDC_DEBUG #ifdef PDC_DEBUG @@ -66,8 +66,10 @@ static int pdc2027x_init_one(struct pci_ static void pdc2027x_error_handler(struct ata_port *ap); static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev); static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev); -static void pdc2027x_post_set_mode(struct ata_port *ap); static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc); +static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long mask); +static int pdc2027x_cable_detect(struct ata_port *ap); +static int pdc2027x_set_mode(struct ata_port *ap, struct ata_device **r_failed); /* * ATA Timing Tables based on 133MHz controller clock. @@ -146,6 +148,7 @@ static struct scsi_host_template pdc2027 static struct ata_port_operations pdc2027x_pata100_ops = { .port_disable = ata_port_disable, + .mode_filter = ata_pci_default_filter, .tf_load = ata_tf_load, .tf_read = ata_tf_read, @@ -166,6 +169,7 @@ static struct ata_port_operations pdc202 .thaw = ata_bmdma_thaw, .error_handler = pdc2027x_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = pdc2027x_cable_detect, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -179,7 +183,8 @@ static struct ata_port_operations pdc202 .port_disable = ata_port_disable, .set_piomode = pdc2027x_set_piomode, .set_dmamode = pdc2027x_set_dmamode, - .post_set_mode = pdc2027x_post_set_mode, + .set_mode = pdc2027x_set_mode, + .mode_filter = pdc2027x_mode_filter, .tf_load = ata_tf_load, .tf_read = ata_tf_read, @@ -200,6 +205,7 @@ static struct ata_port_operations pdc202 .thaw = ata_bmdma_thaw, .error_handler = pdc2027x_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = pdc2027x_cable_detect, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -261,7 +267,7 @@ static inline void __iomem *dev_mmio(str } /** - * pdc2027x_pata_cbl_detect - Probe host controller cable detect info + * pdc2027x_pata_cable_detect - Probe host controller cable detect info * @ap: Port for which cable detect info is desired * * Read 80c cable indicator from Promise extended register. @@ -270,7 +276,7 @@ static inline void __iomem *dev_mmio(str * LOCKING: * None (inherited from caller). */ -static void pdc2027x_cbl_detect(struct ata_port *ap) +static int pdc2027x_cable_detect(struct ata_port *ap) { u32 cgcr; @@ -281,13 +287,10 @@ static void pdc2027x_cbl_detect(struct a PDPRINTK("No cable or 80-conductor cable on port %d\n", ap->port_no); - ap->cbl = ATA_CBL_PATA80; - return; - + return ATA_CBL_PATA80; cbl40: printk(KERN_INFO DRV_NAME ": 40-conductor cable detected on port %d\n", ap->port_no); - ap->cbl = ATA_CBL_PATA40; - ap->udma_mask &= ATA_UDMA_MASK_40C; + return ATA_CBL_PATA40; } /** @@ -315,7 +318,6 @@ static int pdc2027x_prereset(struct ata_ /* Check whether port enabled */ if (!pdc2027x_port_enabled(ap)) return -ENOENT; - pdc2027x_cbl_detect(ap); return ata_std_prereset(ap, deadline); } @@ -335,6 +337,32 @@ static void pdc2027x_error_handler(struc } /** + * pdc2720x_mode_filter - mode selection filter + * @adev: ATA device + * @mask: list of modes proposed + * + * Block UDMA on devices that cause trouble with this controller. + */ + +static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long mask) +{ + unsigned char model_num[ATA_ID_PROD_LEN + 1]; + struct ata_device *pair = ata_dev_pair(adev); + + if (adev->class != ATA_DEV_ATA || adev->devno == 0 || pair == NULL) + return ata_pci_default_filter(adev, mask); + + /* Check for slave of a Maxtor at UDMA6 */ + ata_id_c_string(pair->id, model_num, ATA_ID_PROD, + ATA_ID_PROD_LEN + 1); + /* If the master is a maxtor in UDMA6 then the slave should not use UDMA 6 */ + if(strstr(model_num, "Maxtor") == 0 && pair->dma_mode == XFER_UDMA_6) + mask &= ~ (1 << (6 + ATA_SHIFT_UDMA)); + + return ata_pci_default_filter(adev, mask); +} + +/** * pdc2027x_set_piomode - Initialize host controller PATA PIO timings * @ap: Port to configure * @adev: um @@ -445,17 +473,22 @@ static void pdc2027x_set_dmamode(struct } /** - * pdc2027x_post_set_mode - Set the timing registers back to correct values. + * pdc2027x_set_mode - Set the timing registers back to correct values. * @ap: Port to configure + * @r_failed: Returned device for failure * * The pdc2027x hardware will look at "SET FEATURES" and change the timing registers * automatically. The values set by the hardware might be incorrect, under 133Mhz PLL. * This function overwrites the possibly incorrect values set by the hardware to be correct. */ -static void pdc2027x_post_set_mode(struct ata_port *ap) +static int pdc2027x_set_mode(struct ata_port *ap, struct ata_device **r_failed) { int i; + i = ata_do_set_mode(ap, r_failed); + if (i < 0) + return i; + for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; @@ -477,6 +510,7 @@ static void pdc2027x_post_set_mode(struc } } } + return 0; } /** _