From: Aaron Durbin Insert the unclaimed MMCONFIG resources into the resource tree without the IORESOURCE_BUSY flag during late initialization. This allows the MMCONFIG regions to be visible in the iomem resource tree without interfering with other system resources that were discovered during PCI initialization. Signed-off-by: Aaron Durbin Cc: Andi Kleen Signed-off-by: Andrew Morton --- arch/i386/pci/mmconfig-shared.c | 49 +++++++++++++++++++++++++++--- 1 files changed, 45 insertions(+), 4 deletions(-) diff -puN arch/i386/pci/mmconfig-shared.c~mmconfig-x86_64-i386-insert-unclaimed-mmconfig-resources arch/i386/pci/mmconfig-shared.c --- a/arch/i386/pci/mmconfig-shared.c~mmconfig-x86_64-i386-insert-unclaimed-mmconfig-resources +++ a/arch/i386/pci/mmconfig-shared.c @@ -24,6 +24,9 @@ DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS); +/* Indicate if the mmcfg resources have been placed into the resource table. */ +static int __initdata pci_mmcfg_resources_inserted = 0; + /* K8 systems have some devices (typically in the builtin northbridge) that are only accessible using type1 Normally this can be expressed in the MCFG by not listing them @@ -170,7 +173,7 @@ static int __init pci_mmcfg_check_hostbr return name != NULL; } -static void __init pci_mmcfg_insert_resources(void) +static void __init pci_mmcfg_insert_resources(int resource_flags) { #define PCI_MMCFG_RESOURCE_NAME_LEN 19 int i; @@ -194,10 +197,13 @@ static void __init pci_mmcfg_insert_reso cfg->pci_segment); res->start = cfg->address; res->end = res->start + (num_buses << 20) - 1; - res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + res->flags = IORESOURCE_MEM | resource_flags; insert_resource(&iomem_resource, res); names += PCI_MMCFG_RESOURCE_NAME_LEN; } + + /* Mark that the resources have been inserted. */ + pci_mmcfg_resources_inserted = 1; } static void __init pci_mmcfg_reject_broken(int type) @@ -267,7 +273,42 @@ void __init pci_mmcfg_init(int type) if (type == 1) unreachable_devices(); if (known_bridge) - pci_mmcfg_insert_resources(); + pci_mmcfg_insert_resources(IORESOURCE_BUSY); pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; - } + } else + /* + * Signal not to attempt to insert mmcfg resources because + * the architecture mmcfg setup could not initialize. + */ + pci_mmcfg_resources_inserted = 1; +} + +static int __init pci_mmcfg_late_insert_resources(void) +{ + /* + * If resources are already inserted or we are not using MMCONFIG, + * don't insert the resources. + * */ + if ((pci_mmcfg_resources_inserted == 1) || + (pci_probe & PCI_PROBE_MMCONF) == 0 || + (pci_mmcfg_config_num == 0) || + (pci_mmcfg_config == NULL) || + (pci_mmcfg_config[0].address == 0)) + return 1; + + /* + * Attempt to insert the mmcfg resources but not with the busy flag + * marked so it won't cause request errors when __request_region is + * called. + */ + pci_mmcfg_insert_resources(0); + + return 0; } + +/* + * Perform MMCONFIG resource insertion after PCI initialization to allow for + * misprogrammed MCFG tables that state larger sizes but actually conflict + * with other system resources. + */ +late_initcall(pci_mmcfg_late_insert_resources); _