From: Robert Hancock This adds human-readable decoding of the ATA status and error registers (similar to what drivers/ide does) as well as the SATA Serror register to libata error handling output. This prevents the need to pore through standards documents to figure out the meaning of the bits in these registers when looking at error reports. Some bits that drivers/ide decoded are not decoded here, since the bits are either command-dependent or obsolete, and properly parsing them would add too much complexity. Signed-off-by: Robert Hancock Signed-off-by: Andrew Morton --- drivers/ata/libata-eh.c | 44 ++++++++++++++++++++++++++++++++++++++ include/linux/ata.h | 9 +++++++ 2 files changed, 53 insertions(+) diff -puN drivers/ata/libata-eh.c~libata-add-human-readable-error-value-decoding drivers/ata/libata-eh.c --- a/drivers/ata/libata-eh.c~libata-add-human-readable-error-value-decoding +++ a/drivers/ata/libata-eh.c @@ -1533,6 +1533,27 @@ static void ata_eh_report(struct ata_por ata_port_printk(ap, KERN_ERR, "(%s)\n", desc); } + if (ehc->i.serror) + ata_port_printk(ap, KERN_ERR, + "SError: {%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s}\n", + ehc->i.serror & SERR_DATA_RECOVERED ? "RecovData " : "", + ehc->i.serror & SERR_COMM_RECOVERED ? "RecovComm " : "", + ehc->i.serror & SERR_DATA ? "UnrecovData " : "", + ehc->i.serror & SERR_PERSISTENT ? "Persist " : "", + ehc->i.serror & SERR_PROTOCOL ? "Proto " : "", + ehc->i.serror & SERR_INTERNAL ? "HostInt " : "", + ehc->i.serror & SERR_PHYRDY_CHG ? "PHYRdyChg " : "", + ehc->i.serror & SERR_PHY_INT_ERR ? "PHYInt " : "", + ehc->i.serror & SERR_COMM_WAKE ? "CommWake " : "", + ehc->i.serror & SERR_10B_8B_ERR ? "10B8B " : "", + ehc->i.serror & SERR_DISPARITY ? "Dispar " : "", + ehc->i.serror & SERR_CRC ? "BadCRC " : "", + ehc->i.serror & SERR_HANDSHAKE ? "Handshk " : "", + ehc->i.serror & SERR_LINK_SEQ_ERR ? "LinkSeq " : "", + ehc->i.serror & SERR_TRANS_ST_ERROR ? "TrStaTrns " : "", + ehc->i.serror & SERR_UNRECOG_FIS ? "UnrecFIS " : "", + ehc->i.serror & SERR_DEV_XCHG ? "DevExch " : "" ); + for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { static const char *dma_str[] = { [DMA_BIDIRECTIONAL] = "bidi", @@ -1562,6 +1583,29 @@ static void ata_eh_report(struct ata_por res->hob_feature, res->hob_nsect, res->hob_lbal, res->hob_lbam, res->hob_lbah, res->device, qc->err_mask, ata_err_string(qc->err_mask)); + + if (res->command & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ | + ATA_ERR) ) { + if (res->command & ATA_BUSY) + ata_dev_printk(qc->dev, KERN_ERR, + "status: {Busy}\n" ); + else + ata_dev_printk(qc->dev, KERN_ERR, + "status: {%s%s%s%s}\n", + res->command & ATA_DRDY ? "DRDY " : "", + res->command & ATA_DF ? "DF " : "", + res->command & ATA_DRQ ? "DRQ " : "", + res->command & ATA_ERR ? "ERR " : "" ); + } + + if (cmd->command != ATA_CMD_PACKET && + (res->feature & (ATA_ICRC | ATA_UNC | ATA_IDNF | ATA_ABORTED))) + ata_dev_printk(qc->dev, KERN_ERR, + "error: {%s%s%s%s}\n", + res->feature & ATA_ICRC ? "ICRC " : "", + res->feature & ATA_UNC ? "UNC " : "", + res->feature & ATA_IDNF ? "IDNF " : "", + res->feature & ATA_ABORTED ? "ABRT " : "" ); } } diff -puN include/linux/ata.h~libata-add-human-readable-error-value-decoding include/linux/ata.h --- a/include/linux/ata.h~libata-add-human-readable-error-value-decoding +++ a/include/linux/ata.h @@ -240,6 +240,15 @@ enum { SERR_PROTOCOL = (1 << 10), /* protocol violation */ SERR_INTERNAL = (1 << 11), /* host internal error */ SERR_PHYRDY_CHG = (1 << 16), /* PHY RDY changed */ + SERR_PHY_INT_ERR = (1 << 17), /* PHY internal error */ + SERR_COMM_WAKE = (1 << 18), /* Comm wake */ + SERR_10B_8B_ERR = (1 << 19), /* 10b to 8b decode error */ + SERR_DISPARITY = (1 << 20), /* Disparity */ + SERR_CRC = (1 << 21), /* CRC error */ + SERR_HANDSHAKE = (1 << 22), /* Handshake error */ + SERR_LINK_SEQ_ERR = (1 << 23), /* Link sequence error */ + SERR_TRANS_ST_ERROR = (1 << 24), /* Transport state transition error */ + SERR_UNRECOG_FIS = (1 << 25), /* Unrecognized FIS */ SERR_DEV_XCHG = (1 << 26), /* device exchanged */ /* struct ata_taskfile flags */ _