From: Martin Michlmayr <tbm@cyrius.com>

Use the new i2c framework to load rtc-rs5c372 for the Thecus N2100.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Tested-by: Voipio Riku <Riku.Voipio@movial.fi>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 arch/arm/mach-iop32x/n2100.c |    9 +++++++++
 1 file changed, 9 insertions(+)

diff -puN arch/arm/mach-iop32x/n2100.c~thecus-n2100-register-rtc-rs5c372-i2c-device arch/arm/mach-iop32x/n2100.c
--- a/arch/arm/mach-iop32x/n2100.c~thecus-n2100-register-rtc-rs5c372-i2c-device
+++ a/arch/arm/mach-iop32x/n2100.c
@@ -25,6 +25,7 @@
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
 #include <asm/hardware.h>
@@ -199,6 +200,12 @@ static struct platform_device n2100_seri
 	.resource	= &n2100_uart_resource,
 };
 
+static struct i2c_board_info __initdata n2100_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rtc-rs5c372", 0x32),
+		.type = "rs5c372b",
+	},
+};
 
 /*
  * Pull PCA9532 GPIO #8 low to power off the machine.
@@ -245,6 +252,8 @@ static void __init n2100_init_machine(vo
 	platform_device_register(&iop3xx_i2c0_device);
 	platform_device_register(&n2100_flash_device);
 	platform_device_register(&n2100_serial_device);
+	i2c_register_board_info(0, n2100_i2c_devices,
+		ARRAY_SIZE(n2100_i2c_devices));
 
 	pm_power_off = n2100_power_off;
 
_