From: "Yinghai Lu" So we use the same code with Quad core cpu as old opteron. this patch is usfull when acpi=off or _PXM is not there in DSDT Signed-off-by: Yinghai Lu Cc: Andi Kleen Cc: Andy Whitcroft Cc: Greg KH Cc: Christoph Lameter Signed-off-by: Andrew Morton --- arch/x86_64/pci/k8-bus.c | 88 ++++++++++++++++++++----------------- 1 file changed, 48 insertions(+), 40 deletions(-) diff -puN arch/x86_64/pci/k8-bus.c~x86_64-use-bus-conf-in-nb-conf-fun1-to-get-bus-range-on-node arch/x86_64/pci/k8-bus.c --- a/arch/x86_64/pci/k8-bus.c~x86_64-use-bus-conf-in-nb-conf-fun1-to-get-bus-range-on-node +++ a/arch/x86_64/pci/k8-bus.c @@ -12,15 +12,18 @@ * RED-PEN empty cpus get reported wrong */ -#define NODE_ID_REGISTER 0x60 -#define NODE_ID(dword) (dword & 0x07) -#define LDT_BUS_NUMBER_REGISTER_0 0x94 -#define LDT_BUS_NUMBER_REGISTER_1 0xB4 -#define LDT_BUS_NUMBER_REGISTER_2 0xD4 -#define NR_LDT_BUS_NUMBER_REGISTERS 3 -#define SECONDARY_LDT_BUS_NUMBER(dword) ((dword >> 8) & 0xFF) -#define SUBORDINATE_LDT_BUS_NUMBER(dword) ((dword >> 16) & 0xFF) +#define NODE_ID(dword) ((dword>>4) & 0x07) +#define LDT_BUS_NUMBER_REGISTER_0 0xE0 +#define LDT_BUS_NUMBER_REGISTER_1 0xE4 +#define LDT_BUS_NUMBER_REGISTER_2 0xE8 +#define LDT_BUS_NUMBER_REGISTER_3 0xEC +#define NR_LDT_BUS_NUMBER_REGISTERS 4 +#define SECONDARY_LDT_BUS_NUMBER(dword) ((dword >> 16) & 0xFF) +#define SUBORDINATE_LDT_BUS_NUMBER(dword) ((dword >> 24) & 0xFF) + #define PCI_DEVICE_ID_K8HTCONFIG 0x1100 +#define PCI_DEVICE_ID_K8_10H_HTCONFIG 0x1200 +#define PCI_DEVICE_ID_K8_11H_HTCONFIG 0x1300 #define BUS_NR 256 @@ -60,12 +63,19 @@ early_fill_mp_bus_to_node(void) { int i, j; unsigned slot; - u32 ldtbus, nid; + u32 ldtbus; u32 id; - static int lbnr[3] = { + int node; + u16 deviceid; + u16 vendorid; + int min_bus; + int max_bus; + + static int lbnr[NR_LDT_BUS_NUMBER_REGISTERS] = { LDT_BUS_NUMBER_REGISTER_0, LDT_BUS_NUMBER_REGISTER_1, - LDT_BUS_NUMBER_REGISTER_2 + LDT_BUS_NUMBER_REGISTER_2, + LDT_BUS_NUMBER_REGISTER_3 }; memset(mp_bus_to_node, 0, BUS_NR); @@ -73,38 +83,36 @@ early_fill_mp_bus_to_node(void) if (!early_pci_allowed()) return -1; - for (slot = 0x18; slot < 0x20; slot++) { - id = read_pci_config(0, slot, 0, PCI_VENDOR_ID); - if (id != (PCI_VENDOR_ID_AMD | (PCI_DEVICE_ID_K8HTCONFIG<<16))) - break; - nid = read_pci_config(0, slot, 0, NODE_ID_REGISTER); - - for (i = 0; i < NR_LDT_BUS_NUMBER_REGISTERS; i++) { - ldtbus = read_pci_config(0, slot, 0, lbnr[i]); - /* - * if there are no busses hanging off of the current - * ldt link then both the secondary and subordinate - * bus number fields are set to 0. - * - * RED-PEN - * This is slightly broken because it assumes - * HT node IDs == Linux node ids, which is not always - * true. However it is probably mostly true. - */ - if (!(SECONDARY_LDT_BUS_NUMBER(ldtbus) == 0 - && SUBORDINATE_LDT_BUS_NUMBER(ldtbus) == 0)) { - for (j = SECONDARY_LDT_BUS_NUMBER(ldtbus); - j <= SUBORDINATE_LDT_BUS_NUMBER(ldtbus); - j++) { - int node = NODE_ID(nid); - mp_bus_to_node[j] = (unsigned char)node; - } - } - } + slot = 0x18; + id = read_pci_config(0, slot, 0, PCI_VENDOR_ID); + + vendorid = id & 0xffff; + if (vendorid != PCI_VENDOR_ID_AMD) + goto out; + + deviceid = (id>>16) & 0xffff; + if ((deviceid != PCI_DEVICE_ID_K8HTCONFIG) && + (deviceid != PCI_DEVICE_ID_K8_10H_HTCONFIG) && + (deviceid != PCI_DEVICE_ID_K8_11H_HTCONFIG)) + goto out; + + for (i = 0; i < NR_LDT_BUS_NUMBER_REGISTERS; i++) { + ldtbus = read_pci_config(0, slot, 1, lbnr[i]); + + /* Check if that register is enabled for bus range */ + if ((ldtbus & 7) != 3) + continue; + + min_bus = SECONDARY_LDT_BUS_NUMBER(ldtbus); + max_bus = SUBORDINATE_LDT_BUS_NUMBER(ldtbus); + node = NODE_ID(ldtbus); + for (j = min_bus; j <= max_bus; j++) + mp_bus_to_node[j] = (unsigned char) node; } +out: for (i = 0; i < BUS_NR; i++) { - int node = mp_bus_to_node[i]; + node = mp_bus_to_node[i]; if (node) printk(KERN_DEBUG "bus: %02x to node: %02x\n", i, node); } _