From: Thomas Gleixner Change __setup_APIC_LVTT so it takes the arguments which are necessary for the later clock events switch. Signed-off-by: Thomas Gleixner Signed-off-by: Chris Wright Signed-off-by: Ingo Molnar Cc: Andi Kleen Cc: john stultz Signed-off-by: Andrew Morton --- arch/x86_64/kernel/apic.c | 23 +++++++++++++++-------- 1 files changed, 15 insertions(+), 8 deletions(-) diff -puN arch/x86_64/kernel/apic.c~x86_64-preparatory-apic-set-lvtt arch/x86_64/kernel/apic.c --- a/arch/x86_64/kernel/apic.c~x86_64-preparatory-apic-set-lvtt +++ a/arch/x86_64/kernel/apic.c @@ -763,14 +763,14 @@ void __init init_apic_mappings(void) #define APIC_DIVISOR 16 -static void __setup_APIC_LVTT(unsigned int clocks) +static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) { unsigned int lvtt_value, tmp_value; - int cpu = smp_processor_id(); - - lvtt_value = APIC_LVT_TIMER_PERIODIC | LOCAL_TIMER_VECTOR; - if (cpu_isset(cpu, timer_interrupt_broadcast_ipi_mask)) + lvtt_value = LOCAL_TIMER_VECTOR; + if (!oneshot) + lvtt_value |= APIC_LVT_TIMER_PERIODIC; + if (!irqen) lvtt_value |= APIC_LVT_MASKED; apic_write(APIC_LVTT, lvtt_value); @@ -783,12 +783,14 @@ static void __setup_APIC_LVTT(unsigned i & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) | APIC_TDR_DIV_16); - apic_write(APIC_TMICT, clocks/APIC_DIVISOR); + if (!oneshot) + apic_write(APIC_TMICT, clocks/APIC_DIVISOR); } static void setup_APIC_timer(unsigned int clocks) { unsigned long flags; + int irqen; local_irq_save(flags); @@ -809,7 +811,10 @@ static void setup_APIC_timer(unsigned in c2 |= inb_p(0x40) << 8; } while (c2 - c1 < 300); } - __setup_APIC_LVTT(clocks); + + irqen = ! cpu_isset(smp_processor_id(), + timer_interrupt_broadcast_ipi_mask); + __setup_APIC_LVTT(clocks, 0, irqen); /* Turn off PIT interrupt if we use APIC timer as main timer. Only works with the PM timer right now TBD fix it for HPET too. */ @@ -847,8 +852,10 @@ static int __init calibrate_APIC_clock(v * Put whatever arbitrary (but long enough) timeout * value into the APIC clock, we just want to get the * counter running for calibration. + * + * No interrupt enable ! */ - __setup_APIC_LVTT(4000000000); + __setup_APIC_LVTT(4000000000, 0, 0); apic_start = apic_read(APIC_TMCCT); #ifdef CONFIG_X86_PM_TIMER _