GIT 1a442fe02d205d6980202b07f799ab9336e72ad7 git+ssh://master.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git commit Author: Paul Mundt Date: Fri Sep 21 19:16:05 2007 +0900 sh: Initial SH-X3 SMP support. This adds basic support for SH-X3 SMP (4 CPUs). More IPI and cache debugging is necessary, mostly interfacing the d-cache coherency and the I-cache broadcast invalidates. Only for testing at present! Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit 0016a126accb32f1663eaeba966eb76c98f8929b Author: Paul Mundt Date: Fri Sep 21 18:39:49 2007 +0900 sh: Plug plat_smp_setup() in to generic setup path. Now that the SMP stubs are in place, call in to the setup code to be defined by the platform. Signed-off-by: Paul Mundt commit ceb9b974513de6bd0ee86c30e84c34dd6e974fb5 Author: Magnus Damm Date: Fri Sep 21 18:34:48 2007 +0900 sh: Hook up the SH-X3 SMP intc register groups. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit aba1030a7e529ec9fe47a8cfc06d12a39180fa71 Author: Paul Mundt Date: Fri Sep 21 18:32:32 2007 +0900 sh: Bring SMP support back from the dead. There was a very preliminary bunch of SMP code scattered around for the SH7604 microcontrollers from way back when, and it has mostly suffered bitrot since then. With the tree already having been slowly getting prepped for SMP, this plugs in most of the remaining platform-independent bits. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit f18d533e3cd476aedf41fe1e6e9dc3e0a2446bba Author: Magnus Damm Date: Fri Sep 21 18:16:42 2007 +0900 sh: intc - initial SMP support. This implements initial support for the SMP INTC (particularly INTC2) controllers. These are largely implemented as conventional blocks, with register sets grouped together at fixed strides relative to the CPU id. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit 9964fa8bf952c5c4df9676223fab4cd886d18200 Author: Paul Mundt Date: Fri Sep 21 18:09:55 2007 +0900 sh: Add SMP tlbflush variants. This adds the TLB flushing routines for SMP systems, based on the MIPS implementation, with some additional SH-specific flush routines. Signed-off-by: Paul Mundt commit 7ec9d6f8c0e6932d380da1964021fbebf2311f04 Author: Paul Mundt Date: Fri Sep 21 18:05:20 2007 +0900 sh: Avoid smp_processor_id() in cache desc paths. current_cpu_data uses smp_processor_id() in order to find the corresponding cpu_data. As the cache descs are all currently identical, just have this look at probed results from the boot CPU. Signed-off-by: Paul Mundt commit 2d4a73d5b91528322631830784f4eb7897fb5e41 Author: Paul Mundt Date: Fri Sep 21 18:01:40 2007 +0900 sh: Kill off special boot_cpu_data. This consolidates the cpu_data definitions and gets rid of the special boot_cpu_data. It's made a wrapper to the boot CPU, in order to keep the existing in-tree users happy. Signed-off-by: Paul Mundt commit 00765c816a6396e2bb3c6588019bda1508b62f6a Author: Paul Mundt Date: Fri Sep 21 17:53:26 2007 +0900 sh: Make cpufreq driver less noisy on SMP. The cpufreq driver banner is currently printed for each CPU, move it down so it's not as noisy and it's only printed once. Signed-off-by: Paul Mundt commit c1a069f960f32ff1721b1de12c875855133fe9e4 Author: Paul Mundt Date: Fri Sep 21 15:56:51 2007 +0900 sh: Enable maple by default for the Dreamcast. Signed-off-by: Paul Mundt commit 17be2d2b1c333e1e4c378369ba90ab2dd11c589a Author: Adrian McMenamin Date: Fri Sep 21 15:55:55 2007 +0900 sh: Add maple bus support for the SEGA Dreamcast. The Maple bus is SEGA's proprietary serial bus for peripherals (keyboard, mouse, controller etc). The bus is capable of some (limited) hotplugging and operates at up to 2 M/bits. Drivers of one sort or another existed/exist for 2.4 and a rudimentary port, which didn't support the 2.6 device driver model was also in existence. This driver - for the bus logic itself and for the keyboard (other drivers will follow) are based on the code and concepts of those old drivers but have lots of completely rewritten parts. I have the maple bus code as a built in now as that seems the sane and rational way to handle something like that - you either want the bus or you don't. Signed-off-by: Adrian McMenamin Signed-off-by: Paul Mundt commit e87ab0c43c30faa0f4b337bfa87bce7923e67485 Author: Markus Brunner Date: Fri Sep 21 15:27:35 2007 +0900 sh: Magic Panel MTD mapping update. This update moves the flash mapping for the Magic Panel into the board setup. It also removes references to the old MTD mapping option in the defconfig. Signed-off by: Markus Brunner Signed-off by: Mark Jonas Signed-off-by: Paul Mundt commit 02353f5d2a317861536b8c38fea44196bdd5787c Author: Paul Mundt Date: Fri Sep 21 15:21:55 2007 +0900 sh: rts7751r2d: Fix up trivial build failure. Signed-off-by: Paul Mundt commit 43f4b8c7578b928892b6f01d374346ae14e5eb70 Author: Aoi Shinkai Date: Fri Sep 21 15:18:33 2007 +0900 sh: rts7751r2d cf_ide rework Support CF IDE on R2D-1 boards. Signed-off-by: Aoi Shinkai Signed-off-by: Paul Mundt commit d04a0f79f502a87bb17b147afc4b3e39e75275c3 Author: Paul Mundt Date: Fri Sep 21 11:55:03 2007 +0900 sh: Fix up extended mode TLB for SH-X2+ cores. The extended mode TLB requires both 64-bit PTEs and a 64-bit pgprot, correspondingly, the PGD also has to be 64-bits, so fix that up. The kernel and user permission bits really are decoupled in early cuts of the silicon, which means that we also have to set corresponding kernel permissions on user pages or we end up with user pages that the kernel simply can't touch (!). Finally, with those things corrected, really enable MMUCR.ME and correct the PTEA value (this simply needs to be the upper 32-bits of the PTE, with the size and protection bit encoding). Signed-off-by: Paul Mundt commit db2504966ceb9f08557b6ea3ab7e367016fcaba9 Author: Paul Mundt Date: Fri Sep 21 11:34:31 2007 +0900 sh: Wire up URAM node on SH7785. Add SH7785 URAM as node 1, follows the SH-X3 change. Signed-off-by: Paul Mundt commit 0e01059c3db95b638aa0cc75be4b0e7a134fe904 Author: Paul Mundt Date: Tue Sep 18 15:58:45 2007 +0900 sh: se7206: update defconfig. Signed-off-by: Paul Mundt commit 8f3dc1371efb5fd5f1dc02b2a01da589f2d220a0 Author: Paul Mundt Date: Tue Sep 18 15:41:39 2007 +0900 sh: se7206: Handle non-SuperIO I/O ports. This fixes up the port calculation logic for non-SuperIO accesses, before these were always matching the MRSHPC base, now just make sure the original port is handed back if it's not in the I/O port range. Signed-off-by: Paul Mundt commit c3fae6d163f4647e9390eac3f2a1201e91cd6669 Author: Paul Mundt Date: Fri Sep 14 09:26:07 2007 +0900 sh: r7780rp: irq-r7780rp needs linux/io.h. Trivial build fix. Signed-off-by: Paul Mundt commit 2f0ae55f394a0d38ca3eb2fffac3f4d45c32eb97 Author: Paul Mundt Date: Thu Sep 13 16:36:52 2007 +0900 sh: hp6xx: Trivial build fixes for INTC changes. Get the IRL->IRQ stuff building. Signed-off-by: Paul Mundt commit 7216ddc6b61040d7bfdf44713ea94f6d845553b2 Author: Paul Mundt Date: Thu Sep 13 13:01:15 2007 +0900 sh: se7206: heartbeat needs 32-bit writes. Most boards use 8 or 16-bit access for the LED bank, se7206 needs 32. There's only 8 individual LEDs however, each with a 'special' value in terms of logical ordering. Go FPGA, go! Signed-off-by: Paul Mundt commit dfcb76089ada89a5520ad8544440799e75f01227 Author: Paul Mundt Date: Thu Sep 13 12:59:32 2007 +0900 sh: se7206: Make the I/O port routines less stupid. The port routines were logically inverted, and the MRSHPC range had no upper bound, causing 8 and 16-bit port I/O to get mangled. Signed-off-by: Paul Mundt commit ded5431ff311d963888ac951131a04fe7633aa79 Author: Markus Brunner Date: Wed Sep 12 11:54:58 2007 +0900 sh: Magic Panel R2 board support. This adds support for the SH7720 (SH3-DSP) based Magic Panel R2 board. Signed-off-by: Markus Brunner Signed-off by: Mark Jonas Signed-off-by: Paul Mundt commit 18d18ba8ef147f9d0d97da1da1253ce5c982bb91 Author: Kristoffer Ericson Date: Wed Sep 12 11:36:34 2007 +0900 sh: hp6xx: Enable pata_platform in defconfig. Signed-off-by: Kristoffer Ericson Signed-off-by: Paul Mundt commit aedb598631885c54e1bd61b19a373cd1b97aa568 Author: Kristoffer Ericson Date: Wed Sep 12 11:35:55 2007 +0900 sh: hp6xx: Enable touchscreen and powerbutton IRQs. IRQ0->IRQ3 need to be an IRQ mode for these to work, fix them up. Signed-off-by: Kristoffer Ericson Signed-off-by: Paul Mundt commit 1db4e9bb5682fd3fd3f37f7fe9c322e7c5bb7578 Author: Paul Mundt Date: Tue Sep 11 18:10:23 2007 +0900 sh: Don't enable FPU for SH4AL-DSP. This leads to invalid configurations where both FPU and DSP support can be enabled in the same kernel, resulting in build failure. Signed-off-by: Paul Mundt commit d581593388e39d77acd643b1d7427c5ecbb85a03 Author: Paul Mundt Date: Tue Sep 11 17:55:36 2007 +0900 sh: dma: Fix CONFIG_SYSFS=n build. Trivial build fix for when sysfs is disabled. Signed-off-by: Paul Mundt commit 35f3abe97696e7563b0dbd7c825acdaab423d330 Author: Paul Mundt Date: Tue Sep 11 15:28:32 2007 +0900 sh: INTC stubs for SH7343 and SH7770 builds. Get the SH7343 and SH7770 stuff linking again. Both of these still require proper INTC support. Signed-off-by: Paul Mundt commit 68362e0857ecf8a9da1ac5f7abceafbcfaa969d7 Author: Paul Mundt Date: Tue Sep 11 15:27:29 2007 +0900 serial: sh-sci: kgdb console build fixes. The kgdb console code requires uart_set_options() and friends, which are only provided by the serial core when console support is enabled. These were sitting under CONFIG_SH_KGDB and resulted in a link error when console support wasn't enabled, work that by rolling the console routines under CONFIG_SH_KGDB_CONSOLE, which they should have been all along. Signed-off-by: Paul Mundt commit c9eaaa9763702bdeac5ac5f790dcebafbada44bb Author: Kristoffer Ericson Date: Tue Sep 11 12:51:02 2007 +0900 sh: hp6xx: Update CF IRQ for INTC changes. The vector changed, so follow the INTC changes for the new vector. Signed-off-by: Kristoffer Ericson Signed-off-by: Paul Mundt commit 4f247e84bdb81aab8880f556882a449782a1ea8b Author: Kristoffer Ericson Date: Tue Sep 11 12:49:59 2007 +0900 sh: dma: Fix up build for SH7709 support. Trivial build fixes for SH7709. Signed-off-by: Kristoffer Ericson Signed-off-by: Paul Mundt commit f1382305b9357c8152852d6fcf0d84570d83987a Author: Kristoffer Ericson Date: Tue Sep 11 12:48:45 2007 +0900 sh: hd64461: Trivial build fixes for SH7709. Some trivial fixes to get SH7709 + HD64461 building again. Signed-off-by: Kristoffer Ericson Signed-off-by: Paul Mundt commit eb650d67d8ad0fa16c0c61674d980adb25155358 Author: Kristoffer Ericson Date: Tue Sep 11 12:44:38 2007 +0900 backlight: Fix up hp680_bl build. Trivial build fixes. Signed-off-by: Kristoffer Ericson Signed-off-by: Paul Mundt commit 8c8ee8254767d517907418d88492d4d91f10aca1 Author: Kristoffer Ericson Date: Tue Sep 11 12:43:33 2007 +0900 sh: hp6xx: APM build fix and new battery values. Build fixes for the hp6xx APM code, as well as some adjustments for the battery values. Signed-off-by: Kristoffer Ericson Signed-off-by: Paul Mundt commit 9dd3f2205330a52674d7c015109813f639af0f14 Author: Kristoffer Ericson Date: Tue Sep 11 12:41:18 2007 +0900 sh: update hp6xx defconfig. hp6xx_defconfig resync. Signed-off-by: Kristoffer Ericson Signed-off-by: Paul Mundt commit f12468a6fd9edc43c7beb8be461ca6927a371540 Author: Kristoffer Ericson Date: Tue Sep 11 12:37:30 2007 +0900 sh: Fix OFFCHIP_IRQ_BASE compile error. HP6xx uses OFFCHIP_IRQ_BASE to know the base irq number where non cpu interrupts should start. This define was in irq.h before, but since rework got lost. It really belongs inside hd64461.h since the hp6xx wont work without it. Signed-off-by: Kristoffer Ericson Signed-off-by: Paul Mundt commit 3d73e53870e5045eebe32b9b7d46e72b02adc4d9 Author: Paul Mundt Date: Tue Sep 11 12:35:51 2007 +0900 sh: nommu fault handler needs signal.h. Trivial build fix. Signed-off-by: Paul Mundt commit aa0e77dc21d73057208b8683114b400c898cf53a Author: Paul Mundt Date: Tue Sep 11 12:35:09 2007 +0900 sh: Fix up se7751 build. Trivial compile fix. Signed-off-by: Paul Mundt commit da6b003adc73011fd441a89c30d4f896667e24ba Author: Magnus Damm Date: Mon Sep 10 12:08:42 2007 +0900 sh: add writesb(), readsb(), writesw() and readsw() to io.h This patch adds inline versions of writesb(), readsb(), writesw() and readsw() to include/asm-sh/io.h. Stolen from include/asm-avr32/io.h. These functions are needed to compile certain device drivers such as ax88796. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit 9d4c82625914c31fd21e341765d476784cc74f14 Author: Magnus Damm Date: Mon Sep 10 12:06:44 2007 +0900 sh: remove sh7780 interrupt controller hack from pci code This patch removes the sh778x specific pci code that pokes in the interrupt controller and overwrites things. The new and improved IRL code manages this in plat_irq_setup() and plat_irq_setup_pins() instead. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit 897cfcd878ccc9c2b0f1b3bb00a2368c43feafc0 Author: Magnus Damm Date: Mon Sep 10 12:06:03 2007 +0900 sh: intc - rework higlander irq code for r7780mp and r7785rp This patch reworks the highlander irq code for r7780mp and r7785rp. The same strategy as for the new R2D code is used here - the board specific interrupts are now starting from HL_FPGA_IRQ_BASE. The code for r7780rp is not touched due to lack of hardware. Tested with CF, AX88796 on r7780mp and r7785rp. The touch switch interrupt has also been tested on r7780mp. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit 5cbc3af521a85aab8ae72c25afcf2698a7547cbd Author: Magnus Damm Date: Mon Sep 10 12:05:10 2007 +0900 sh: minor fixes This patch contains the following fixes: - Adds sh7785 support to CONFIG_EARLY_SCIF_CONSOLE_PORT. - Removes duplicate include from rts7751r2d irq code. - Removes CONFIG_CPU_HAS_INTC from sh7720 Kconfig entry. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit 953c8ef250fc6c329d1607cf9cd7fac1d72d7579 Author: Magnus Damm Date: Mon Sep 10 12:03:50 2007 +0900 sh: intc - irl mode update for sh7780 and sh7785 This patch contains the following fixes and improvements: - Fix address typo for INTMSK2 / INTMSKCLR2 registers on sh7780. - Adds IRQ_MODE_IRLnnnn_MASK using intc controller for IRL masking. - Good old IRQ_MODE_IRLnnnn should not register any intc controller. - plat_irq_setup_pins() now selects IRL or IRQ mode. - the holding function is now disabled using ICR0. By default all external pin interrupts are disabled. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit 123f5f188638bfc673aca22ade64b863ec3a2804 Author: Adrian McMenamin Date: Mon Sep 10 12:01:42 2007 +0900 fb: pvr2fb: Shared IRQ for dreamcast pvr2. The maple bus driver (http://lkml.org/lkml/2007/9/4/165) uses hardware synchronisation between the maple bus and the VBLANK to poll the maple bus. This patch makes the interrupt shareable. By definition the interrupt is for both devices. Signed-off by: Adrian McMenamin Signed-off-by: Paul Mundt commit 1254d1db11d8528558613fde5b89eb09306f50a3 Author: Magnus Damm Date: Thu Aug 23 15:19:40 2007 +0900 sh: remove CONFIG_CPU_HAS_INTC_IRQ All processor specific interrupt code is now converted to make use of the new intc code. The config option CONFIG_CPU_HAS_INTC_IRQ is because of that pointless. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit a1fd306b887f06d648f45a2c722e9036dced9590 Author: Paul Mundt Date: Thu Aug 23 15:11:44 2007 +0900 sh: Fix up heartbeat build and resource size. We were abusing the resource size for the number of bits, this has been reworked using proper platform data, so this can be tidied up now. Boards in general only have a 1-byte wide resource, which the ioremap_nocache() case already handles. Signed-off-by: Paul Mundt commit b8996e49e8d777abd64833095a1cd291b749df18 Author: Magnus Damm Date: Wed Aug 22 13:36:23 2007 +0900 sh: defconfigs for R2D-PLUS and for R2D-1 This patch removes the old r2d config file named rts7751r2d_defconfig and adds separate config files for the two r2d board versions. The two new defconfigs are identical with the exception of board selection: - rts7751r2dplus_defconfig selects CONFIG_RTS7751R2D_PLUS=y - rts7751r2d1_defconfig selects CONFIG_RTS7751R2D_1=y Please remember to update both files with r2d changes in the future. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit 8a467a529f01c3471b195a0e8989c6177fe145ef Author: Paul Mundt Date: Wed Aug 22 10:34:31 2007 +0900 sh: Overhaul spinlocks and rwlocks for SH-4A SMP. This rips out some of the old spinlock and rwlock behaviour that the SH-2 parts were using and reworks them for LL/SC semantics on the SH-4A. This is primarily only useful for SH-X3 multi-cores, but can also be used for building CONFIG_SMP=y testing kernels on SH-4A UP. Signed-off-by: Paul Mundt commit b05d1865b46ea72c66ba082598ba370582bb590e Author: Paul Mundt Date: Tue Aug 21 12:25:09 2007 +0900 sh: Kill off volatile silliness in sq_flush_range(). CC arch/sh/kernel/cpu/sh4/sq.o arch/sh/kernel/cpu/sh4/sq.c: In function 'sq_flush_range': arch/sh/kernel/cpu/sh4/sq.c:65: warning: passing argument 1 of 'prefetch' discards qualifiers from pointer target type This didn't actually need to be volatile in the first place, so just kill off the qualifier entirely. Signed-off-by: Paul Mundt commit 2d009328db0951d5eec77a5fe0df3c3e64b35851 Author: Paul Mundt Date: Mon Aug 20 13:15:51 2007 +0900 sh: More license string silliness. 'GPL v2' vs 'GPLv2'. Signed-off-by: Paul Mundt commit 8786c952c1682a132e99b736beae4523e409b13d Author: Paul Mundt Date: Mon Aug 20 13:03:41 2007 +0900 sh: heartbeat driver update. Add some flags for the heartbeat driver, and kill off some duplication in the bit positions for the boards that don't have special cases. This also allows for variable access widths and inversion. Signed-off-by: Paul Mundt commit 2eb0303c2cd536d7f15c7f3bafc848b850a447f0 Author: Magnus Damm Date: Fri Aug 17 00:53:41 2007 +0900 sh: intc - add support for sh7206 This patch converts the cpu specific interrupt setup code for sh7206 from ipr to intc. New vectors are also added to match the information provided by the datasheet. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit 0dc3fc04dd0251aa95b49ca7048e9e8f24291166 Author: Magnus Damm Date: Fri Aug 17 00:53:07 2007 +0900 sh: intc - add support for sh7619 This patch converts the cpu specific interrupt setup code for sh7619 from ipr to intc. New vectors are also added to match the information provided by the datasheet. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit c4773bc2a011efa9abe2027f6959106d6f911889 Author: Magnus Damm Date: Fri Aug 17 00:51:47 2007 +0900 sh: fix irqs for the second serial port on sh7206 This patch makes sure the serial port interrupt irqs matches the datasheet. Only irqs for SCIF1 are changed. While at some cosmetic spaces are added. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit 3d37d94e5aab669f5a492bb3cda67bbbbbca50b8 Author: Magnus Damm Date: Fri Aug 17 00:50:44 2007 +0900 sh: intc - primary priority masking fixes This patch contains various intc fixes for problems reported by Markus Brunner on the linuxsh-dev mailing list: http://marc.info/?l=linuxsh-dev&m=118701948224991&w=1 Apart from added comments, the fixes are: - add intc_set_priority() function prototype to hw_irq.h - fix off-by-one error in intc_set_priority() - make sure _INTC_WIDTH() is set for primary priority masking Big thanks to Markus for finding these problems. Version two fixes a compile error and an inverted primary check. Signed-off-by: Magnus Damm Acked-by: Markus Brunner Signed-off-by: Paul Mundt commit 5c37e025352b993d8726b0207ff2270b2f2bc7d6 Author: Magnus Damm Date: Fri Aug 17 00:45:35 2007 +0900 sh: intc - mark data structures as __initdata With the intc core improved it is now possible to put the intc data structures in the initdata section. Version two of this patch puts the __initdata inside DECLARE_INTC_DESC() and removes the __initdata included in the board specific r2d code. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit 46420e49c9fd76defecfb3f048ab20c5a72dfd0a Author: Magnus Damm Date: Sun Aug 12 15:31:29 2007 +0900 sh: x3 - add ipi vectors With the intc dual prio register support in place it is now possible to add the ipi vectors to x3. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit f8b40d8ce86035b126a27a57ed9139c08ae3ebf1 Author: Magnus Damm Date: Sun Aug 12 15:30:40 2007 +0900 sh: replace sh specific CONFIG_VOYAGERGX with CONFIG_MFD_SM501 This patch replaces all instances of CONFIG_VOYAGERGX with CONFIG_MFD_SM501. While at it we make sure the r2d code compiles both with and without SM501. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit 2eeec85638cebcb6fbcb2abfe182a32252f3456d Author: Magnus Damm Date: Sun Aug 12 15:29:16 2007 +0900 sh: intc - convert board specific r2d code This patch converts the board specific interrupt code for r2d to make use of intc. While at it we improve the Kconfig to avoid confusion. - Two sets of interrupt tables exist - one for R2D-1 and one for R2D-PLUS. - R2D-1 and R2D-PLUS use the same irq constants. - R2D-1 has AX88796 support, R2D-PLUS does not hook up that IRQ. - R2D-PLUS has KEY support, R2D-1 does not hook up that IRQ. - The number and order of IRQ values are disconnected from register bits. - Interrupt sources now start from IRQ 100. - The machvec demux function converts from irlm IRQ 0-14 to IRQ 100++. Tested on R2D-1 and R2D-PLUS boards. Version 2 adds CONFIG_RTS7751R2D_1 and CONFIG_RTS7751R2D_PLUS together with intc structured as __initdata. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit 73505b445dbb8ad12df468404c4dd5cde9c40c65 Author: Magnus Damm Date: Sun Aug 12 15:26:12 2007 +0900 sh: intc - rework core code This patch reworks the intc core, implementing the following features: - Support dual priority registers - one set and one clear register - All 8/16/32 bit register combinations are now supported - Both single mask and single enable bitmap register are supported - Add code to set interrupt priority - Speedup sense and priority configuration code - Allocate data using bootmem, allows intc data structures to be __initdata - Save memory - allocated memory footprint is smaller than intc structures Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit 6ef5fb2cfcedaab4a43493c8f2305a67c0ce1af6 Author: Magnus Damm Date: Sun Aug 12 15:22:02 2007 +0900 sh: intc - add a clear register to struct intc_prio_reg We need a secondary register member in struct intc_prio_reg to support dual priority registers used by ipi on x3. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit d6aee69ca11550f3ca325ceaa020ea74e173478f Author: Magnus Damm Date: Sun Aug 12 15:18:33 2007 +0900 sh: x3 - fix setup_bootmem_node() compile error with shx3_defconfig This makes sure the function prototype for setup_bootmem_node() gets included. The file setup-shx3.c does not compile otherwise for CONFIG_NUMA=n. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit 3ea6bc3de4f15fcae84fb31eeea4d420685a3da2 Author: Markus Brunner Date: Mon Aug 20 08:59:33 2007 +0900 sh: Add SH7720 CPU support. This adds support for the SH7720 (SH3-DSP) CPU. Signed-off by: Markus Brunner Signed-off by: Mark Jonas Signed-off-by: Paul Mundt commit dfc5ed2a939baf08f9385a8c6249b719cac63665 Author: Markus Brunner Date: Mon Aug 20 08:58:12 2007 +0900 sh: Add gpio.h stubs for PFC definitions. This adds the PFC definitions for SH-3, as well as consolidating the gpio.h mess within sh-sci. Stub in sh64, as it's the odd one out between the sh-sci architectures (sh, sh64, h8300) in this capacity. Signed-off by: Markus Brunner Signed-off by: Mark Jonas Signed-off-by: Paul Mundt commit f7f86345fd0cf951613e76e4d00f1f6e8cd11f81 Author: Paul Mundt Date: Wed Aug 8 18:11:26 2007 +0900 sh: Kill off duplicate symbol exports on SMP. synchronize_irq() was being exported twice, kill off the duplicate export. Signed-off-by: Paul Mundt commit e289fd972c9943e51c46929e9dbec3cc4558a6b8 Author: Paul Mundt Date: Wed Aug 8 18:09:13 2007 +0900 serial: sh-sci: Tidy cpufreq printk. This was a bit more verbose than it needed to be. Signed-off-by: Paul Mundt commit d3428e91017f2ecf5655b3ffdf6ed65f5430ade1 Author: Paul Mundt Date: Wed Aug 8 17:06:54 2007 +0900 sh: Wire up CSM node for SH-X3. Now that NODES_SHIFT is bumped up, we can plug in the CSM block as a separate node, too. Signed-off-by: Paul Mundt commit 1760b7d760b2804a87affcb8ec74edde8812a1ea Author: Paul Mundt Date: Wed Aug 8 16:57:05 2007 +0900 serial: sh-sci: Shut up compiler warning for SH-X3 SCIF. Signed-off-by: Paul Mundt commit 9904494d6a5303f6eebf6fe95a37bf1f952a3f5d Author: Paul Mundt Date: Wed Aug 8 16:45:07 2007 +0900 sh: Bump up NODES_SHIFT for SH-X3. This was at 1, which is where most subtypes want it. SH-X3 has more nodes, so bump it up to 3. Signed-off-by: Paul Mundt commit af24fdc1685ff8b27075afbc12d7f6b35b385ae1 Author: Paul Mundt Date: Wed Aug 8 16:31:38 2007 +0900 sh: x3proto: Trivial ILSEL build fix. Signed-off-by: Paul Mundt commit e7109a96e6e2a1f7c4b778146902d86c4f558949 Author: Paul Mundt Date: Wed Aug 8 15:27:55 2007 +0900 sh: x3proto: Hook up ethernet and USB platform devices. Now that we have a way of enabling the IRQs, hook up the platform devices and wrap in to ILSEL for mapping the vectors. Signed-off-by: Paul Mundt commit fef96086270e8d3c99fb2bfc72eef94d95ab2240 Author: Paul Mundt Date: Wed Aug 8 15:26:51 2007 +0900 sh: x3proto: ILSEL IRQ support. This adds functionality for the on-board ILSEL IRQs that chain IRL mode events. Many on-board devices (ethernet, usb, etc.) rely on ILSEL IRQs directly. Signed-off-by: Paul Mundt commit 94807a33dc4aaf522d3eab62db225361e5a97b2a Author: Paul Mundt Date: Wed Aug 8 15:22:04 2007 +0900 sh: Initial support for SH-X3 prototype board. This adds initial support for the SH-X3 prototype board. Only simple logic for the IRQ controller and the heartbeat driver for now. Signed-off-by: Paul Mundt commit 8d797cd191397b2a92b190228f07c7715c1c832a Author: Paul Mundt Date: Tue Aug 7 18:52:29 2007 +0900 sh: Plug in SH-X3 SCIF0 for sercon earlyprintk. Signed-off-by: Paul Mundt commit 6d64d4256cccd3a452ebd8c37a1d41e2d5dab8c6 Author: Paul Mundt Date: Tue Aug 7 18:51:19 2007 +0900 sh: intc: Fix sense regs oops for IRL IRQs. IRL doesn't always define sense registers, so don't bother trying to iterate through the table. This ended up causing an oops on SH-X3 when using IRL mode. Signed-off-by: Paul Mundt commit 96290d808fa4c9b8e744dc1cd032b005179f4710 Author: Magnus Damm Date: Fri Aug 3 14:29:20 2007 +0900 sh: remove intc2 code There is no point in keeping around the now unused intc2 code. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit 48180cab3adf4cb290c28b70e44e958b7fb8a5b0 Author: Magnus Damm Date: Fri Aug 3 14:27:20 2007 +0900 sh: intc - convert voyagergx code This patch converts the sh-specific voyagergx interrupt code to make use of intc. A lot of "interesting" old cruft gets replaced with intc tables and some simple demux code. - All interrupt sources in the sm501 data sheet are now in the header. - The number and order of IRQ values are disconnected from register bits. - Interrupt sources now start from IRQ 200. - set_irq_chained_handler() is now used to hook up the demux function. In the future it would probably make sense to move the interrupt demuxer into into the mfd driver, but this is probably a nice step in the right direction until that happens. Tested on a R2D-1 board using the serial port hooked up to the sm501. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit 51da64264b8d59a1e5fceebd94a975690b70b086 Author: Magnus Damm Date: Fri Aug 3 14:25:32 2007 +0900 sh: intc - add single bitmap register support This patch adds single bitmap register support to intc. The current code only handles 16 and 32 bit registers where a set bit means interrupt enabled, but this is easy to extend in the future. The INTC_IRQ() macro is also added to provide a way to hook in interrupt controllers for FPGAs in boards or companion chips. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit 2635e8558a7ec0002724e3da8c0a221d2c08af33 Author: Magnus Damm Date: Fri Aug 3 14:24:29 2007 +0900 sh: intc - remove redundant irq code for shmin This patch removes redundant interrupt code for the shmin board which is using a sh770x processor and 4 IRQ lines as individual interrupts (IRQ-mode). Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit d59645d6ba67337ff09369d9da4fc47f7dc361cc Author: Magnus Damm Date: Fri Aug 3 14:23:35 2007 +0900 sh: intc - remove redundant irq code for sh03, snapgear and titan This patch removes redundant board specific interrupt code for boards using sh775x processors and 4 IRQ lines in "Individual Interrupt Mode" aka IRLM. Three boards are affected: sh03, snapgear and titan. The right way to do this is to use cpu specific code provided by intc. A nice side effect is that sh03 now compiles, board not BROKEN any more. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit ad89f87a84040a57c4a78ca2759b364f72f423ab Author: Paul Mundt Date: Fri Aug 3 14:19:58 2007 +0900 rtc: rtc-sh: Support 4-digit year on SH7705/SH7710/SH7712. All SH-4 parts have a 4-digit year, while the SH-3 parts typically only use a 2-digit one. The SH7705, SH7710, and SH7712 SH-3 parts however opted to extend it to 4-digit and still look and act like an SH-3 RTC in all other ways. This adds a capability flag (RTC_CAP_4_DIGIT_YEAR) that these corner-case CPU subtypes can set in their platform data and cleans up some of the ifdef mess in the driver as a result. Reported-by: Markus Brunner Signed-off-by: Paul Mundt commit 7da3b8ef662af6252aa17c55cc0aa6d74cbf02e4 Author: Paul Mundt Date: Wed Aug 1 17:52:47 2007 +0900 sh: Initial multiple-node support for SH-X3. Wire up CPU#0 URAM as node 1 on SH-X3. Signed-off-by: Paul Mundt commit 1ee010087e2d26f0d8182bb189d5606e3586253c Author: Magnus Damm Date: Wed Aug 1 17:02:22 2007 +0900 sh: intc - add support for x3 This patch converts the cpu specific interrupt setup code for x3 from intc2 to intc. New vectors are also added to match the preliminary information. Use plat_irq_setup_pins() to select between IRQ and IRL mode for IRQ0-3. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit 137b53b71cd421e0f59f7c4a3767c0fa9e49260a Author: Magnus Damm Date: Wed Aug 1 16:50:42 2007 +0900 sh: intc - fix IRQ4 and IRQ5 typo on sh3 The intc tables for sh3 currently contain a typo where the bit fields in IPRD are mixed up for IRQ4 and IRQ5. This patch makes sure the correct bit fields are used - all according to the datasheets. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit ac38e4d33d8da3c3c402d2b4858d107273287f43 Author: Paul Mundt Date: Tue Jul 31 18:52:12 2007 +0900 sh: Fix cache disabling build failures on nommu. The cache disabling stuff screwed up some of the sh4 nommu builds, fix it up again. Signed-off-by: Paul Mundt commit c9d03d9a80c4bcc571efd93fe80ed40973030422 Author: Magnus Damm Date: Tue Jul 31 17:13:39 2007 +0900 sh: simplify se7780 IRQ code The new intc code handles IRQ3 and IRQ7 in the cpu specific code already, so there is no reason to duplicate that here. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit e29bfbc44332ee2233d87d5adfd1824fd8a1c73b Author: Magnus Damm Date: Tue Jul 31 17:12:34 2007 +0900 sh: intc - add support for SH7760 This patch converts the cpu specific interrupt setup code for sh7760 from ipr + intc2 to intc. New vectors are also added to match the information provided by the datasheet. Vectors for IRQ4-IRQ7 are enabled by default. Use plat_irq_setup_pins() if pins IRL0-3 should be used in IRLM mode. The patch also adds the SIM block to the serial port platform data. Version two of this patch fixes MMCIF problems reported by Manuel Lauss. Signed-off-by: Magnus Damm Acked-by: Manuel Lauss Signed-off-by: Paul Mundt commit a0e23267d4c57cdaa88114c3d88e25c87ee32d84 Author: Magnus Damm Date: Tue Jul 31 17:11:21 2007 +0900 sh: intc - add support for SH7785 This patch converts the cpu specific interrupt setup code for sh7785 from intc2 to intc. New vectors are also added to match the information provided by the datasheet. No IRQ/IRL pin vectors are enabled by default. Use plat_irq_setup_pins() to select between IRL and IRQ mode. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit e7bd34a15b85655f24d1b45edbe3bdfebf9d027e Author: Paul Mundt Date: Tue Jul 31 17:07:28 2007 +0900 sh: Support explicit L1 cache disabling. This reworks the cache mode configuration in Kconfig, and allows for explicit selection of write-back/write-through/off configurations. All of the cache flushing routines are optimized away for the off case. Signed-off-by: Paul Mundt commit ac919986d7dfc5d1d9f5585521307f222a8ebeaf Author: Magnus Damm Date: Thu Jul 26 10:13:21 2007 +0900 sh: intc - avoid SH7710 specific vector on SH7712 This patch makes sure that the sh7710 specific ipsec vector is missing if building for a sh7712. All according to the datasheet. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit 1301e71562acc301a39fd363010c971aade8511a Author: Magnus Damm Date: Thu Jul 26 10:12:50 2007 +0900 sh: intc - add missing vectors for SH7707 This patch adds a few missing vectors for sh7707. The only interrupt controller differences between sh7707 and sh7709 seem to be added vectors for one LCD controller and two PCMCIA slots. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit ec58f1f32de0b6f9e83aada94c857a8fa9b00070 Author: Magnus Damm Date: Wed Jul 25 17:50:01 2007 +0900 sh: intc - add support for SH7706, SH7707, SH7708, SH7709 This patch unifies the cpu specific interrupt setup code for sh7706, sh7707, sh7708 and sh7709 and moves the code into a new file called setup-sh770x.c. It makes sense to share the setup code between these processors because most hardware blocks are identical from a software point of view. With this patch the sh770x processors now have a complete set of vectors that match with the information provided by the data sheets. This is a big improvement for sh7708. Vectors for IRQ4 and IRQ5 are enabled by default. Use plat_irq_setup_pins() if pins IRQ0-3 should be used in IRQ mode. This patch also unifies the platform device setup code which means that the rtc driver now has platform data for all sh770x processors. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit 28b146c84ed571043f473d2ac2f2a27e48fda7d1 Author: Magnus Damm Date: Wed Jul 25 17:47:07 2007 +0900 sh: intc - add support for SH7710 This patch converts the cpu specific interrupt setup code for sh7710 from ipr to intc. While at it new vectors are added to match the information provided by the datasheet. Version two simplifies the Kconfig part. Vectors for IRQ4 and IRQ5 are enabled by default. Use plat_irq_setup_pins() if pins IRQ0-3 should be used in IRQ mode. This patch also adds sh7710 specific platform data for the rtc driver. The base address of SCIF1 is adjusted to match the datasheet. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt commit 70e8be0a4e21f71e654bea2e5ec4789e976a796b Author: Magnus Damm Date: Wed Jul 25 10:50:42 2007 +0900 sh: intc - add support for SH7705 This patch converts the cpu specific interrupt setup code for sh7705 from ipr to intc. While at it new vectors are added to match the information provided by the datasheet. Vectors for IRQ4 and IRQ5 are enabled by default. Use plat_irq_setup_pins() if pins IRQ0-3 should be used in IRQ mode. This patch also adds sh7705 specific platform data for the rtc driver. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt arch/sh/Kconfig | 36 + arch/sh/Kconfig.debug | 6 arch/sh/Makefile | 4 arch/sh/boards/hp6xx/hp6xx_apm.c | 9 arch/sh/boards/hp6xx/setup.c | 35 - arch/sh/boards/magicpanelr2/Kconfig | 13 arch/sh/boards/magicpanelr2/Makefile | 5 arch/sh/boards/magicpanelr2/setup.c | 394 ++++++++ arch/sh/boards/mpc1211/setup.c | 2 arch/sh/boards/renesas/r7780rp/Makefile | 5 arch/sh/boards/renesas/r7780rp/irq-r7780mp.c | 61 + arch/sh/boards/renesas/r7780rp/irq-r7780rp.c | 6 arch/sh/boards/renesas/r7780rp/irq-r7785rp.c | 46 + arch/sh/boards/renesas/r7780rp/setup.c | 70 + arch/sh/boards/renesas/rts7751r2d/Kconfig | 24 arch/sh/boards/renesas/rts7751r2d/irq.c | 176 ++- arch/sh/boards/renesas/rts7751r2d/setup.c | 95 +- arch/sh/boards/renesas/x3proto/Makefile | 1 arch/sh/boards/renesas/x3proto/ilsel.c | 151 +++ arch/sh/boards/renesas/x3proto/setup.c | 136 +++ arch/sh/boards/se/7206/io.c | 31 - arch/sh/boards/se/7206/setup.c | 19 arch/sh/boards/se/7343/setup.c | 2 arch/sh/boards/se/770x/setup.c | 10 arch/sh/boards/se/7722/setup.c | 9 arch/sh/boards/se/7751/setup.c | 11 arch/sh/boards/se/7780/irq.c | 28 - arch/sh/boards/se/7780/setup.c | 7 arch/sh/boards/sh03/setup.c | 28 - arch/sh/boards/shmin/setup.c | 26 arch/sh/boards/snapgear/setup.c | 30 - arch/sh/boards/titan/setup.c | 30 - arch/sh/cchips/Kconfig | 13 arch/sh/cchips/hd6446x/hd64461.c | 6 arch/sh/cchips/voyagergx/irq.c | 188 +--- arch/sh/configs/dreamcast_defconfig | 155 +-- arch/sh/configs/hp6xx_defconfig | 559 +++++------ arch/sh/configs/magicpanelr2_defconfig | 925 ++++++++++++++++++ arch/sh/configs/rts7751r2d1_defconfig | 1167 ++++++++++++++++++++++ arch/sh/configs/rts7751r2d_defconfig | 1353 -------------------------- arch/sh/configs/rts7751r2dplus_defconfig | 1167 ++++++++++++++++++++++ arch/sh/configs/se7206_defconfig | 223 ++-- arch/sh/configs/shx3_defconfig | 456 +++++---- arch/sh/drivers/dma/Kconfig | 1 arch/sh/drivers/dma/dma-sh.c | 13 arch/sh/drivers/heartbeat.c | 70 + arch/sh/drivers/pci/ops-rts7751r2d.c | 8 arch/sh/drivers/pci/pci-sh7780.c | 13 arch/sh/drivers/push-switch.c | 2 arch/sh/kernel/cpu/init.c | 27 - arch/sh/kernel/cpu/irq/Makefile | 4 arch/sh/kernel/cpu/irq/intc.c | 562 ++++++++--- arch/sh/kernel/cpu/irq/intc2.c | 86 -- arch/sh/kernel/cpu/sh2/setup-sh7619.c | 93 +- arch/sh/kernel/cpu/sh2a/setup-sh7206.c | 217 +++- arch/sh/kernel/cpu/sh3/Makefile | 10 arch/sh/kernel/cpu/sh3/probe.c | 3 arch/sh/kernel/cpu/sh3/setup-sh7705.c | 172 ++- arch/sh/kernel/cpu/sh3/setup-sh7708.c | 43 - arch/sh/kernel/cpu/sh3/setup-sh7709.c | 145 --- arch/sh/kernel/cpu/sh3/setup-sh770x.c | 224 ++++ arch/sh/kernel/cpu/sh3/setup-sh7710.c | 200 +++- arch/sh/kernel/cpu/sh3/setup-sh7720.c | 210 ++++ arch/sh/kernel/cpu/sh4/setup-sh7750.c | 54 + arch/sh/kernel/cpu/sh4/setup-sh7760.c | 253 +++-- arch/sh/kernel/cpu/sh4/sq.c | 4 arch/sh/kernel/cpu/sh4a/Makefile | 6 arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 4 arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 38 - arch/sh/kernel/cpu/sh4a/setup-sh7770.c | 4 arch/sh/kernel/cpu/sh4a/setup-sh7780.c | 91 +- arch/sh/kernel/cpu/sh4a/setup-sh7785.c | 308 +++++- arch/sh/kernel/cpu/sh4a/setup-shx3.c | 234 ++++ arch/sh/kernel/cpu/sh4a/smp-shx3.c | 120 ++ arch/sh/kernel/cpufreq.c | 3 arch/sh/kernel/early_printk.c | 38 + arch/sh/kernel/head.S | 18 arch/sh/kernel/setup.c | 15 arch/sh/kernel/sh_ksyms.c | 15 arch/sh/kernel/smp.c | 307 ++++-- arch/sh/kernel/timers/timer-tmu.c | 3 arch/sh/kernel/traps.c | 5 arch/sh/mm/Kconfig | 54 + arch/sh/mm/Makefile | 21 arch/sh/mm/cache-debugfs.c | 2 arch/sh/mm/cache-sh4.c | 62 + arch/sh/mm/fault-nommu.c | 1 arch/sh/mm/pmb.c | 2 arch/sh/mm/tlb-sh4.c | 55 + drivers/rtc/rtc-sh.c | 51 + drivers/serial/sh-sci.c | 39 + drivers/serial/sh-sci.h | 34 - drivers/sh/Makefile | 4 drivers/sh/maple/Makefile | 3 drivers/sh/maple/maple.c | 735 ++++++++++++++ drivers/video/backlight/hp680_bl.c | 4 drivers/video/pvr2fb.c | 2 include/asm-sh/cacheflush.h | 33 + include/asm-sh/cpu-sh3/cache.h | 4 include/asm-sh/cpu-sh3/dma.h | 13 include/asm-sh/cpu-sh3/gpio.h | 66 + include/asm-sh/cpu-sh3/mmu_context.h | 9 include/asm-sh/cpu-sh3/timer.h | 9 include/asm-sh/cpu-sh3/ubc.h | 3 include/asm-sh/cpu-sh4/mmu_context.h | 14 include/asm-sh/dma.h | 5 include/asm-sh/dreamcast/maple.h | 37 + include/asm-sh/gpio.h | 19 include/asm-sh/hd64461.h | 1 include/asm-sh/heartbeat.h | 17 include/asm-sh/hw_irq.h | 53 - include/asm-sh/ilsel.h | 45 + include/asm-sh/io.h | 26 include/asm-sh/magicpanelr2.h | 67 + include/asm-sh/page.h | 10 include/asm-sh/pgtable.h | 115 +- include/asm-sh/processor.h | 11 include/asm-sh/r7780rp.h | 33 - include/asm-sh/rtc.h | 6 include/asm-sh/rts7751r2d.h | 65 + include/asm-sh/sh03/io.h | 9 include/asm-sh/smp.h | 34 - include/asm-sh/snapgear.h | 12 include/asm-sh/spinlock.h | 181 +++ include/asm-sh/spinlock_types.h | 11 include/asm-sh/system.h | 1 include/asm-sh/voyagergx.h | 39 + include/asm-sh64/gpio.h | 8 include/linux/maple.h | 80 ++ 129 files changed, 9465 insertions(+), 3981 deletions(-) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 54878f0..51bccbc 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -118,7 +118,7 @@ endchoice config SH_FPU bool "FPU support" - depends on CPU_SH4 + depends on CPU_HAS_FPU default y help Selecting this option will enable support for SH processors that @@ -178,12 +178,6 @@ config CPU_HAS_INTEVT config CPU_HAS_MASKREG_IRQ bool -config CPU_HAS_INTC_IRQ - bool - -config CPU_HAS_INTC2_IRQ - bool - config CPU_HAS_IPR_IRQ bool @@ -205,6 +199,9 @@ config CPU_HAS_PTEA config CPU_HAS_DSP bool +config CPU_HAS_FPU + bool + endmenu menu "Board support" @@ -258,7 +255,6 @@ config SH_7780_SOLUTION_ENGINE bool "SolutionEngine7780" select SOLUTION_ENGINE select SYS_SUPPORTS_PCI - select CPU_HAS_INTC2_IRQ depends on CPU_SUBTYPE_SH7780 help Select 7780 SolutionEngine if configuring for a Renesas SH7780 @@ -309,7 +305,7 @@ config SH_MPC1211 config SH_SH03 bool "Interface CTP/PCI-SH03" - depends on CPU_SUBTYPE_SH7751 && BROKEN + depends on CPU_SUBTYPE_SH7751 select CPU_HAS_IPR_IRQ select SYS_SUPPORTS_PCI help @@ -395,11 +391,22 @@ config SH_LBOX_RE2 help Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2. +config SH_X3PROTO + bool "SH-X3 Prototype board" + depends on CPU_SUBTYPE_SHX3 + +config SH_MAGIC_PANEL_R2 + bool "Magic Panel R2" + depends on CPU_SUBTYPE_SH7720 + help + Select Magic Panel R2 if configuring for Magic Panel R2. + endmenu source "arch/sh/boards/renesas/hs7751rvoip/Kconfig" source "arch/sh/boards/renesas/rts7751r2d/Kconfig" source "arch/sh/boards/renesas/r7780rp/Kconfig" +source "arch/sh/boards/magicpanelr2/Kconfig" menu "Timer and clock configuration" @@ -659,6 +666,17 @@ config SUPERHYWAY tristate "SuperHyway Bus support" depends on CPU_SUBTYPE_SH4_202 +config MAPLE + bool "Maple Bus support" + depends on SH_DREAMCAST + help + The Maple Bus is SEGA's serial communication bus for peripherals + on the Dreamcast. Without this bus support you won't be able to + get your Dreamcast keyboard etc to work, so most users + probably want to say 'Y' here, unless you are only using the + Dreamcast with a serial line terminal or a remote network + connection. + config CF_ENABLER bool "Compact Flash Enabler support" depends on SOLUTION_ENGINE || SH_SH03 diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 52f6a99..b507b50 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -28,13 +28,17 @@ config EARLY_SCIF_CONSOLE serial I/O. config EARLY_SCIF_CONSOLE_PORT - hex "SCIF port for early console" + hex depends on EARLY_SCIF_CONSOLE default "0xffe00000" if CPU_SUBTYPE_SH7780 + default "0xffea0000" if CPU_SUBTYPE_SH7785 default "0xfffe9800" if CPU_SUBTYPE_SH7206 default "0xf8420000" if CPU_SUBTYPE_SH7619 default "0xa4400000" if CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7705 + default "0xa4430000" if CPU_SUBTYPE_SH7720 + default "0xffc30000" if CPU_SUBTYPE_SHX3 default "0xffe80000" if CPU_SH4 + default "0x00000000" config EARLY_PRINTK bool "Early printk support" diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 97ac586..a0a2083 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -118,6 +118,7 @@ machdir-$(CONFIG_SH_7751_SYSTEMH) += re machdir-$(CONFIG_SH_EDOSK7705) += renesas/edosk7705 machdir-$(CONFIG_SH_HIGHLANDER) += renesas/r7780rp machdir-$(CONFIG_SH_7710VOIPGW) += renesas/sh7710voipgw +machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev machdir-$(CONFIG_SH_LANDISK) += landisk machdir-$(CONFIG_SH_TITAN) += titan @@ -125,6 +126,7 @@ machdir-$(CONFIG_SH_SHMIN) += shmin machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) += se/7206 machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) += se/7619 machdir-$(CONFIG_SH_LBOX_RE2) += lboxre2 +machdir-$(CONFIG_SH_MAGIC_PANEL_R2) += magicpanelr2 incdir-y := $(notdir $(machdir-y)) @@ -135,7 +137,7 @@ endif # Companion chips core-$(CONFIG_HD6446X_SERIES) += arch/sh/cchips/hd6446x/ -core-$(CONFIG_VOYAGERGX) += arch/sh/cchips/voyagergx/ +core-$(CONFIG_MFD_SM501) += arch/sh/cchips/voyagergx/ cpuincdir-$(CONFIG_CPU_SH2) := cpu-sh2 cpuincdir-$(CONFIG_CPU_SH2A) := cpu-sh2a diff --git a/arch/sh/boards/hp6xx/hp6xx_apm.c b/arch/sh/boards/hp6xx/hp6xx_apm.c index d1c1460..640ca2a 100644 --- a/arch/sh/boards/hp6xx/hp6xx_apm.c +++ b/arch/sh/boards/hp6xx/hp6xx_apm.c @@ -20,9 +20,9 @@ #define SH7709_PGDR 0xa400012c #define APM_CRITICAL 10 #define APM_LOW 30 -#define HP680_BATTERY_MAX 875 -#define HP680_BATTERY_MIN 600 -#define HP680_BATTERY_AC_ON 900 +#define HP680_BATTERY_MAX 898 +#define HP680_BATTERY_MIN 486 +#define HP680_BATTERY_AC_ON 1023 #define MODNAME "hp6x0_apm" @@ -65,7 +65,7 @@ static void hp6x0_apm_get_power_status(s static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev) { - if (!apm_suspended) + if (!APM_DISABLED) apm_queue_event(APM_USER_SUSPEND); return IRQ_HANDLED; @@ -91,7 +91,6 @@ static int __init hp6x0_apm_init(void) static void __exit hp6x0_apm_exit(void) { free_irq(HP680_BTN_IRQ, 0); - apm_get_info = NULL; } module_init(hp6x0_apm_init); diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/hp6xx/setup.c index 7ae7089..2f414ac 100644 --- a/arch/sh/boards/hp6xx/setup.c +++ b/arch/sh/boards/hp6xx/setup.c @@ -7,7 +7,7 @@ * May be copied or modified under the terms of the GNU General Public * License. See linux/COPYING for more information. * - * Setup code for an HP680 (internal peripherials only) + * Setup code for HP620/HP660/HP680/HP690 (internal peripherials only) */ #include #include @@ -19,7 +19,7 @@ #include #include #define SCPCR 0xa4000116 -#define SCPDR 0xa4000136 +#define SCPDR 0xa4000136 /* CF Slot */ static struct resource cf_ide_resources[] = { @@ -34,7 +34,7 @@ static struct resource cf_ide_resources[ .flags = IORESOURCE_MEM, }, [2] = { - .start = 93, + .start = 77, .flags = IORESOURCE_IRQ, }, }; @@ -46,10 +46,22 @@ static struct platform_device cf_ide_dev .resource = cf_ide_resources, }; +static struct platform_device jornadakbd_device = { + .name = "jornada680_kbd", + .id = -1, +}; + static struct platform_device *hp6xx_devices[] __initdata = { - &cf_ide_device, + &cf_ide_device, + &jornadakbd_device, }; +static void __init hp6xx_init_irq(void) +{ + /* Gets touchscreen and powerbutton IRQ working */ + plat_irq_setup_pins(IRQ_MODE_IRQ); +} + static int __init hp6xx_devices_setup(void) { return platform_add_devices(hp6xx_devices, ARRAY_SIZE(hp6xx_devices)); @@ -61,11 +73,11 @@ static void __init hp6xx_setup(char **cm u16 v; v = inw(HD64461_STBCR); - v |= HD64461_STBCR_SURTST | HD64461_STBCR_SIRST | - HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST | - HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST | - HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST | - HD64461_STBCR_SAFECKE_IST; + v |= HD64461_STBCR_SURTST | HD64461_STBCR_SIRST | + HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST | + HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST | + HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST| + HD64461_STBCR_SAFECKE_IST; #ifndef CONFIG_HD64461_ENABLER v |= HD64461_STBCR_SPC1ST; #endif @@ -101,6 +113,9 @@ device_initcall(hp6xx_devices_setup); static struct sh_machine_vector mv_hp6xx __initmv = { .mv_name = "hp6xx", .mv_setup = hp6xx_setup, - .mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM, + /* IRQ's : CPU(64) + CCHIP(16) + FREE_TO_USE(6) */ + .mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM + 6, .mv_irq_demux = hd64461_irq_demux, + /* Enable IRQ0 -> IRQ3 in IRQ_MODE */ + .mv_init_irq = hp6xx_init_irq, }; diff --git a/arch/sh/boards/magicpanelr2/Kconfig b/arch/sh/boards/magicpanelr2/Kconfig new file mode 100644 index 0000000..b0abddc --- /dev/null +++ b/arch/sh/boards/magicpanelr2/Kconfig @@ -0,0 +1,13 @@ +if SH_MAGIC_PANEL_R2 + +menu "Magic Panel R2 options" + +config SH_MAGIC_PANEL_R2_VERSION + int SH_MAGIC_PANEL_R2_VERSION + default "3" + help + Set the version of the Magic Panel R2 + +endmenu + +endif diff --git a/arch/sh/boards/magicpanelr2/Makefile b/arch/sh/boards/magicpanelr2/Makefile new file mode 100644 index 0000000..7a6d586 --- /dev/null +++ b/arch/sh/boards/magicpanelr2/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Magic Panel specific parts +# + +obj-y := setup.o \ No newline at end of file diff --git a/arch/sh/boards/magicpanelr2/setup.c b/arch/sh/boards/magicpanelr2/setup.c new file mode 100644 index 0000000..f3b8b07 --- /dev/null +++ b/arch/sh/boards/magicpanelr2/setup.c @@ -0,0 +1,394 @@ +/* + * linux/arch/sh/boards/magicpanel/setup.c + * + * Copyright (C) 2007 Markus Brunner, Mark Jonas + * + * Magic Panel Release 2 board setup + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define LAN9115_READY (ctrl_inl(0xA8000084UL) & 0x00000001UL) + +/* Prefer cmdline over RedBoot */ +static const char *probes[] = { "cmdlinepart", "RedBoot", NULL }; + +/* Wait until reset finished. Timeout is 100ms. */ +static int __init ethernet_reset_finished(void) +{ + int i; + + if (LAN9115_READY) + return 1; + + for (i = 0; i < 10; ++i) { + mdelay(10); + if (LAN9115_READY) + return 1; + } + + return 0; +} + +static void __init reset_ethernet(void) +{ + /* PMDR: LAN_RESET=on */ + CLRBITS_OUTB(0x10, PORT_PMDR); + + udelay(200); + + /* PMDR: LAN_RESET=off */ + SETBITS_OUTB(0x10, PORT_PMDR); +} + +static void __init setup_chip_select(void) +{ + /* CS2: LAN (0x08000000 - 0x0bffffff) */ + /* no idle cycles, normal space, 8 bit data bus */ + ctrl_outl(0x36db0400, CS2BCR); + /* (SW:1.5 WR:3 HW:1.5), ext. wait */ + ctrl_outl(0x000003c0, CS2WCR); + + /* CS4: CAN1 (0xb0000000 - 0xb3ffffff) */ + /* no idle cycles, normal space, 8 bit data bus */ + ctrl_outl(0x00000200, CS4BCR); + /* (SW:1.5 WR:3 HW:1.5), ext. wait */ + ctrl_outl(0x00100981, CS4WCR); + + /* CS5a: CAN2 (0xb4000000 - 0xb5ffffff) */ + /* no idle cycles, normal space, 8 bit data bus */ + ctrl_outl(0x00000200, CS5ABCR); + /* (SW:1.5 WR:3 HW:1.5), ext. wait */ + ctrl_outl(0x00100981, CS5AWCR); + + /* CS5b: CAN3 (0xb6000000 - 0xb7ffffff) */ + /* no idle cycles, normal space, 8 bit data bus */ + ctrl_outl(0x00000200, CS5BBCR); + /* (SW:1.5 WR:3 HW:1.5), ext. wait */ + ctrl_outl(0x00100981, CS5BWCR); + + /* CS6a: Rotary (0xb8000000 - 0xb9ffffff) */ + /* no idle cycles, normal space, 8 bit data bus */ + ctrl_outl(0x00000200, CS6ABCR); + /* (SW:1.5 WR:3 HW:1.5), no ext. wait */ + ctrl_outl(0x001009C1, CS6AWCR); +} + +static void __init setup_port_multiplexing(void) +{ + /* A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5); + * A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1); + */ + ctrl_outw(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */ + + /* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1); + * B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0); + */ + ctrl_outw(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */ + + /* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4); + * C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0; + */ + ctrl_outw(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */ + + /* D7 GPO(PD7); D6 GPO(PD6); D5 GPO(PD5); D4 GPO(PD4); + * D3 GPO(PD3); D2 GPO(PD2); D1 GPO(PD1); D0 GPO(PD0); + */ + ctrl_outw(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */ + + /* E7 (x); E6 GPI(nu); E5 GPI(nu); E4 LCD_M_DISP; + * E3 LCD_CL1; E2 LCD_CL2; E1 LCD_DON; E0 LCD_FLM; + */ + ctrl_outw(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */ + + /* F7 (x); F6 DA1(VLCD); F5 DA0(nc); F4 AN3; + * F3 AN2(MID_AD); F2 AN1(EARTH_AD); F1 AN0(TEMP); F0 GPI+(nc); + */ + ctrl_outw(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */ + + /* G7 (x); G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ); G4 GPI(KEY2); + * G3 GPI(KEY1); G2 GPO(LED11); G1 GPO(LED10); G0 GPO(LED9); + */ + ctrl_outw(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */ + + /* H7 (x); H6 /RAS(BRAS); H5 /CAS(BCAS); H4 CKE(BCKE); + * H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR; H0 USB1_PWR; + */ + ctrl_outw(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */ + + /* J7 (x); J6 AUDCK; J5 ASEBRKAK; J4 AUDATA3; + * J3 AUDATA2; J2 AUDATA1; J1 AUDATA0; J0 AUDSYNC; + */ + ctrl_outw(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */ + + /* K7 (x); K6 (x); K5 (x); K4 (x); + * K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nu); K0 PINT4(FLASH_READY) + */ + ctrl_outw(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */ + + /* L7 TRST; L6 TMS; L5 TDO; L4 TDI; + * L3 TCK; L2 (x); L1 (x); L0 (x); + */ + ctrl_outw(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */ + + /* M7 GPO(CURRENT_SINK); M6 GPO(PWR_SWITCH); M5 GPO(LAN_SPEED); + * M4 GPO(LAN_RESET); M3 GPO(BUZZER); M2 GPO(LCD_BL); + * M1 CS5B(CAN3_CS); M0 GPI+(nc); + */ + ctrl_outw(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */ + + /* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit, + * LAN_RESET=off, BUZZER=off, LCD_BL=off + */ +#if CONFIG_SH_MAGIC_PANEL_R2_VERSION == 2 + ctrl_outb(0x30, PORT_PMDR); +#elif CONFIG_SH_MAGIC_PANEL_R2_VERSION == 3 + ctrl_outb(0xF0, PORT_PMDR); +#else +#error Unknown revision of PLATFORM_MP_R2 +#endif + + /* P7 (x); P6 (x); P5 (x); + * P4 GPO(nu); P3 IRQ3(LAN_IRQ); P2 IRQ2(CAN3_IRQ); + * P1 IRQ1(CAN2_IRQ); P0 IRQ0(CAN1_IRQ) + */ + ctrl_outw(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */ + ctrl_outb(0x10, PORT_PPDR); + + /* R7 A25; R6 A24; R5 A23; R4 A22; + * R3 A21; R2 A20; R1 A19; R0 A0; + */ + ctrl_outw(0x0000, PORT_PRCR); /* 00 00 00 00 00 00 00 00 */ + + /* S7 (x); S6 (x); S5 (x); S4 GPO(EEPROM_CS2); + * S3 GPO(EEPROM_CS1); S2 SIOF0_TXD; S1 SIOF0_RXD; S0 SIOF0_SCK; + */ + ctrl_outw(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */ + + /* T7 (x); T6 (x); T5 (x); T4 COM1_CTS; + * T3 COM1_RTS; T2 COM1_TXD; T1 COM1_RXD; T0 GPO(WDOG) + */ + ctrl_outw(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */ + + /* U7 (x); U6 (x); U5 (x); U4 GPI+(/AC_FAULT); + * U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD; U0 TOUCH_SCK; + */ + ctrl_outw(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */ + + /* V7 (x); V6 (x); V5 (x); V4 GPO(MID2); + * V3 GPO(MID1); V2 CARD_TxD; V1 CARD_RxD; V0 GPI+(/BAT_FAULT); + */ + ctrl_outw(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */ +} + +static void __init mpr2_setup(char **cmdline_p) +{ + __set_io_port_base(0xa0000000); + + /* set Pin Select Register A: + * /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2, + * /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND + */ + ctrl_outw(0xAABC, PORT_PSELA); + /* set Pin Select Register B: + * /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC, + * LCD_VEPWC, IIC_SDA, IIC_SCL, Reserved + */ + ctrl_outw(0x3C00, PORT_PSELB); + /* set Pin Select Register C: + * SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved + */ + ctrl_outw(0x0000, PORT_PSELC); + /* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK, + * Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved + */ + ctrl_outw(0x0000, PORT_PSELD); + /* set USB TxRx Control: Reserved, DRV, Reserved, USB_TRANS, USB_SEL */ + ctrl_outw(0x0101, PORT_UTRCTL); + /* set USB Clock Control: USSCS, USSTB, Reserved (HighByte always A5) */ + ctrl_outw(0xA5C0, PORT_UCLKCR_W); + + setup_chip_select(); + + setup_port_multiplexing(); + + reset_ethernet(); + + printk(KERN_INFO "Magic Panel Release 2 A.%i\n", + CONFIG_SH_MAGIC_PANEL_R2_VERSION); + + if (ethernet_reset_finished() == 0) + printk(KERN_WARNING "Ethernet not ready\n"); +} + +static struct resource smc911x_resources[] = { + [0] = { + .start = 0xa8000000, + .end = 0xabffffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 35, + .end = 35, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc911x_device = { + .name = "smc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smc911x_resources), + .resource = smc911x_resources, +}; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED, + .flags = IORESOURCE_MEM, + }, +}; + +static struct heartbeat_data heartbeat_data = { + .flags = HEARTBEAT_INVERTED, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct mtd_partition *parsed_partitions; + +static struct mtd_partition mpr2_partitions[] = { + /* Reserved for bootloader, read-only */ + { + .name = "Bootloader", + .offset = 0x00000000UL, + .size = MPR2_MTD_BOOTLOADER_SIZE, + .mask_flags = MTD_WRITEABLE, + }, + /* Reserved for kernel image */ + { + .name = "Kernel", + .offset = MTDPART_OFS_NXTBLK, + .size = MPR2_MTD_KERNEL_SIZE, + }, + /* Rest is used for Flash FS */ + { + .name = "Flash_FS", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct physmap_flash_data flash_data = { + .width = 2, +}; + +static struct resource flash_resource = { + .start = 0x00000000, + .end = 0x2000000UL, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device flash_device = { + .name = "physmap-flash", + .id = -1, + .resource = &flash_resource, + .num_resources = 1, + .dev = { + .platform_data = &flash_data, + }, +}; + +static struct mtd_info *flash_mtd; + +static struct map_info mpr2_flash_map = { + .name = "Magic Panel R2 Flash", + .size = 0x2000000UL, + .bankwidth = 2, +}; + +static void __init set_mtd_partitions(void) +{ + int nr_parts = 0; + + simple_map_init(&mpr2_flash_map); + flash_mtd = do_map_probe("cfi_probe", &mpr2_flash_map); + nr_parts = parse_mtd_partitions(flash_mtd, probes, + &parsed_partitions, 0); + /* If there is no partition table, used the hard coded table */ + if (nr_parts <= 0) { + flash_data.parts = mpr2_partitions; + flash_data.nr_parts = ARRAY_SIZE(mpr2_partitions); + } else { + flash_data.nr_parts = nr_parts; + flash_data.parts = parsed_partitions; + } +} + +/* + * Add all resources to the platform_device + */ + +static struct platform_device *mpr2_devices[] __initdata = { + &heartbeat_device, + &smc911x_device, + &flash_device, +}; + + +static int __init mpr2_devices_setup(void) +{ + set_mtd_partitions(); + return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices)); +} +device_initcall(mpr2_devices_setup); + +/* + * Initialize IRQ setting + */ +static void __init init_mpr2_IRQ(void) +{ + plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-5 */ + + set_irq_type(32, IRQ_TYPE_LEVEL_LOW); /* IRQ0 CAN1 */ + set_irq_type(33, IRQ_TYPE_LEVEL_LOW); /* IRQ1 CAN2 */ + set_irq_type(34, IRQ_TYPE_LEVEL_LOW); /* IRQ2 CAN3 */ + set_irq_type(35, IRQ_TYPE_LEVEL_LOW); /* IRQ3 SMSC9115 */ + set_irq_type(36, IRQ_TYPE_EDGE_RISING); /* IRQ4 touchscreen */ + set_irq_type(37, IRQ_TYPE_EDGE_FALLING); /* IRQ5 touchscreen */ + + intc_set_priority(32, 13); /* IRQ0 CAN1 */ + intc_set_priority(33, 13); /* IRQ0 CAN2 */ + intc_set_priority(34, 13); /* IRQ0 CAN3 */ + intc_set_priority(35, 6); /* IRQ3 SMSC9115 */ +} + +/* + * The Machine Vector + */ + +static struct sh_machine_vector mv_mpr2 __initmv = { + .mv_name = "mpr2", + .mv_setup = mpr2_setup, + .mv_init_irq = init_mpr2_IRQ, +}; diff --git a/arch/sh/boards/mpc1211/setup.c b/arch/sh/boards/mpc1211/setup.c index 8ce03e0..fede363 100644 --- a/arch/sh/boards/mpc1211/setup.c +++ b/arch/sh/boards/mpc1211/setup.c @@ -285,7 +285,7 @@ static int put_smb_blk(unsigned char *p, static struct resource heartbeat_resources[] = { [0] = { .start = 0xa2000000, - .end = 0xa2000000 + 8 - 1, + .end = 0xa2000000, .flags = IORESOURCE_MEM, }, }; diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/renesas/r7780rp/Makefile index b1d20af..dd26182 100644 --- a/arch/sh/boards/renesas/r7780rp/Makefile +++ b/arch/sh/boards/renesas/r7780rp/Makefile @@ -1,9 +1,10 @@ # # Makefile for the R7780RP-1 specific parts of the kernel # -irqinit-y := irq-r7780rp.o +irqinit-$(CONFIG_SH_R7780MP) := irq-r7780mp.o irqinit-$(CONFIG_SH_R7785RP) := irq-r7785rp.o -obj-y := setup.o irq.o $(irqinit-y) +irqinit-$(CONFIG_SH_R7780RP) := irq-r7780rp.o irq.o +obj-y := setup.o $(irqinit-y) ifneq ($(CONFIG_SH_R7785RP),y) obj-$(CONFIG_PUSH_SWITCH) += psw.o diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c b/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c new file mode 100644 index 0000000..59b47fe --- /dev/null +++ b/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c @@ -0,0 +1,61 @@ +/* + * Renesas Solutions Highlander R7780MP Support. + * + * Copyright (C) 2002 Atom Create Engineering Co., Ltd. + * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2007 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include + +enum { + UNUSED = 0, + + /* board specific interrupt sources */ + AX88796, /* Ethernet controller */ + CF, /* Compact Flash */ + PSW, /* Push Switch */ + EXT1, /* EXT1n IRQ */ + EXT4, /* EXT4n IRQ */ +}; + +static struct intc_vect vectors[] __initdata = { + INTC_IRQ(CF, IRQ_CF), + INTC_IRQ(PSW, IRQ_PSW), + INTC_IRQ(AX88796, IRQ_AX88796), + INTC_IRQ(EXT1, IRQ_EXT1), + INTC_IRQ(EXT4, IRQ_EXT4), +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xa4000000, 0, 16, /* IRLMSK */ + { 0, 0, 0, 0, CF, 0, 0, 0, + 0, 0, 0, EXT4, 0, EXT1, PSW, AX88796 } }, +}; + +static unsigned char irl2irq[HL_NR_IRL] __initdata = { + 0, IRQ_CF, 0, 0, + 0, 0, 0, 0, + 0, IRQ_EXT4, 0, IRQ_EXT1, + 0, IRQ_AX88796, IRQ_PSW, +}; + +static DECLARE_INTC_DESC(intc_desc, "r7780mp", vectors, + NULL, NULL, mask_registers, NULL, NULL); + +unsigned char * __init highlander_init_irq_r7780mp(void) +{ + if ((ctrl_inw(0xa4000700) & 0xf000) == 0x2000) { + printk(KERN_INFO "Using r7780mp interrupt controller.\n"); + register_intc_controller(&intc_desc); + return irl2irq; + } + + return NULL; +} diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c index f5f3587..fa4a534 100644 --- a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c +++ b/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c @@ -9,13 +9,15 @@ * for more details. */ #include -#include +#include #include -void __init highlander_init_irq(void) +unsigned char * __init highlander_init_irq_r7780rp(void) { int i; for (i = 0; i < 15; i++) make_r7780rp_irq(i); + + return NULL; } diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c index dd6ec4c..b2c6a84 100644 --- a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c +++ b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c @@ -1,19 +1,55 @@ /* - * Renesas Solutions Highlander R7780RP-1 Support. + * Renesas Solutions Highlander R7785RP Support. * * Copyright (C) 2002 Atom Create Engineering Co., Ltd. * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2007 Magnus Damm * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ #include -#include +#include +#include #include -void __init highlander_init_irq(void) +enum { + UNUSED = 0, + + /* board specific interrupt sources */ + AX88796, /* Ethernet controller */ + CF, /* Compact Flash */ +}; + +static struct intc_vect vectors[] __initdata = { + INTC_IRQ(CF, IRQ_CF), + INTC_IRQ(AX88796, IRQ_AX88796), +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xa4000010, 0, 16, /* IRLMCR1 */ + { 0, 0, 0, 0, CF, AX88796, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0 } }, +}; + +static unsigned char irl2irq[HL_NR_IRL] __initdata = { + 0, IRQ_CF, 0, 0, + 0, 0, 0, 0, + 0, 0, IRQ_AX88796, 0, + 0, 0, 0, +}; + +static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors, + NULL, NULL, mask_registers, NULL, NULL); + +unsigned char * __init highlander_init_irq_r7785rp(void) { + if ((ctrl_inw(0xa4000158) & 0xf000) != 0x1000) + return NULL; + + printk(KERN_INFO "Using r7785rp interrupt controller.\n"); + ctrl_outw(0x0000, PA_IRLSSR1); /* FPGA IRLSSR1(CF_CD clear) */ /* Setup the FPGA IRL */ @@ -24,6 +60,6 @@ void __init highlander_init_irq(void) ctrl_outw(0x4321, PA_IRLPRE); /* FPGA IRLE */ ctrl_outw(0x0000, PA_IRLPRF); /* FPGA IRLF */ - make_r7780rp_irq(1); /* CF card */ - make_r7780rp_irq(10); /* On-board ethernet */ + register_intc_controller(&intc_desc); + return irl2irq; } diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c index adb529d..afe9de7 100644 --- a/arch/sh/boards/renesas/r7780rp/setup.c +++ b/arch/sh/boards/renesas/r7780rp/setup.c @@ -19,6 +19,7 @@ #include #include #include #include +#include #include static struct resource r8a66597_usb_host_resources[] = { @@ -30,8 +31,8 @@ static struct resource r8a66597_usb_host }, [1] = { .name = "r8a66597_hcd", - .start = 11, /* irq number */ - .end = 11, + .start = IRQ_EXT1, /* irq number */ + .end = IRQ_EXT1, .flags = IORESOURCE_IRQ, }, }; @@ -56,8 +57,8 @@ static struct resource m66592_usb_periph }, [1] = { .name = "m66592_udc", - .start = 9, /* irq number */ - .end = 9, + .start = IRQ_EXT4, /* irq number */ + .end = IRQ_EXT4, .flags = IORESOURCE_IRQ, }, }; @@ -85,11 +86,7 @@ static struct resource cf_ide_resources[ .flags = IORESOURCE_MEM, }, [2] = { -#ifdef CONFIG_SH_R7780RP - .start = 4, -#else - .start = 1, -#endif + .start = IRQ_CF, .flags = IORESOURCE_IRQ, }, }; @@ -108,16 +105,23 @@ static struct platform_device cf_ide_dev }, }; -static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 }; - static struct resource heartbeat_resources[] = { [0] = { .start = PA_OBLED, - .end = PA_OBLED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .end = PA_OBLED, .flags = IORESOURCE_MEM, }, }; +#ifndef CONFIG_SH_R7785RP +static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 }; + +static struct heartbeat_data heartbeat_data = { + .bit_pos = heartbeat_bit_pos, + .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), +}; +#endif + static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, @@ -125,7 +129,7 @@ static struct platform_device heartbeat_ /* R7785RP has a slightly more sensible FPGA.. */ #ifndef CONFIG_SH_R7785RP .dev = { - .platform_data = heartbeat_bit_pos, + .platform_data = &heartbeat_data, }, #endif .num_resources = ARRAY_SIZE(heartbeat_resources), @@ -217,12 +221,50 @@ static void __init highlander_setup(char pm_power_off = r7780rp_power_off; } +static unsigned char irl2irq[HL_NR_IRL]; + +int highlander_irq_demux(int irq) +{ + if (irq >= HL_NR_IRL || !irl2irq[irq]) + return irq; + + return irl2irq[irq]; +} + +void __init highlander_init_irq(void) +{ + unsigned char *ucp = NULL; + + do { +#ifdef CONFIG_SH_R7780MP + ucp = highlander_init_irq_r7780mp(); + if (ucp) + break; +#endif +#ifdef CONFIG_SH_R7785RP + ucp = highlander_init_irq_r7785rp(); + if (ucp) + break; +#endif +#ifdef CONFIG_SH_R7780RP + highlander_init_irq_r7780rp(); + ucp = irl2irq; + break; +#endif + } while (0); + + if (ucp) { + plat_irq_setup_pins(IRQ_MODE_IRL3210); + memcpy(irl2irq, ucp, HL_NR_IRL); + } +} + /* * The Machine Vector */ static struct sh_machine_vector mv_highlander __initmv = { .mv_name = "Highlander", - .mv_nr_irqs = 109, .mv_setup = highlander_setup, .mv_init_irq = highlander_init_irq, + .mv_irq_demux = highlander_irq_demux, }; diff --git a/arch/sh/boards/renesas/rts7751r2d/Kconfig b/arch/sh/boards/renesas/rts7751r2d/Kconfig index 7780d1f..925a7aa 100644 --- a/arch/sh/boards/renesas/rts7751r2d/Kconfig +++ b/arch/sh/boards/renesas/rts7751r2d/Kconfig @@ -2,10 +2,28 @@ if SH_RTS7751R2D menu "RTS7751R2D options" -config RTS7751R2D_REV11 - bool "RTS7751R2D Rev. 1.1 board support" +choice + prompt "R2D Board Revision" + default RTS7751R2D_PLUS + +config RTS7751R2D_PLUS + bool "R2D-PLUS" + help + Selecting this option will configure the kernel for R2D-PLUS. + + R2D-PLUS is the smaller of the two R2D board versions, equipped + with a single PCI slot. + +config RTS7751R2D_1 + bool "R2D-1" help - Selecting this option will support version rev. 1.1. + Selecting this option will configure the kernel for R2D-1. + + R2D-1 is the larger of the two R2D board versions, equipped + with two PCI slots. + +endchoice + endmenu endif diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/renesas/rts7751r2d/irq.c index 0bae904..dadc4aa 100644 --- a/arch/sh/boards/renesas/rts7751r2d/irq.c +++ b/arch/sh/boards/renesas/rts7751r2d/irq.c @@ -1,84 +1,156 @@ /* * linux/arch/sh/boards/renesas/rts7751r2d/irq.c * + * Copyright (C) 2007 Magnus Damm * Copyright (C) 2000 Kazumoto Kojima * - * Renesas Technology Sales RTS7751R2D Support. + * Renesas Technology Sales RTS7751R2D Support, R2D-PLUS and R2D-1. * * Modified for RTS7751R2D by * Atom Create Engineering Co., Ltd. 2002. */ #include -#include #include #include #include +#include #include -#if defined(CONFIG_RTS7751R2D_REV11) -static int mask_pos[] = {11, 9, 8, 12, 10, 6, 5, 4, 7, 14, 13, 0, 0, 0, 0}; -#else -static int mask_pos[] = {6, 11, 9, 8, 12, 10, 5, 4, 7, 14, 13, 0, 0, 0, 0}; -#endif +#define R2D_NR_IRL 13 -extern int voyagergx_irq_demux(int irq); -extern void setup_voyagergx_irq(void); +enum { + UNUSED = 0, -static void enable_rts7751r2d_irq(unsigned int irq) -{ - /* Set priority in IPR back to original value */ - ctrl_outw(ctrl_inw(IRLCNTR1) | (1 << mask_pos[irq]), IRLCNTR1); -} + /* board specific interrupt sources (R2D-1 and R2D-PLUS) */ + EXT, /* EXT_INT0-3 */ + RTC_T, RTC_A, /* Real Time Clock */ + AX88796, /* Ethernet controller (R2D-1 board) */ + KEY, /* Key input (R2D-PLUS board) */ + SDCARD, /* SD Card */ + CF_CD, CF_IDE, /* CF Card Detect + CF IDE */ + SM501, /* SM501 aka Voyager */ + PCI_INTD_RTL8139, /* Ethernet controller */ + PCI_INTC_PCI1520, /* Cardbus/PCMCIA bridge */ + PCI_INTB_RTL8139, /* Ethernet controller with HUB (R2D-PLUS board) */ + PCI_INTB_SLOT, /* PCI Slot 3.3v (R2D-1 board) */ + PCI_INTA_SLOT, /* PCI Slot 3.3v */ + TP, /* Touch Panel */ +}; -static void disable_rts7751r2d_irq(unsigned int irq) -{ - /* Set the priority in IPR to 0 */ - ctrl_outw(ctrl_inw(IRLCNTR1) & (0xffff ^ (1 << mask_pos[irq])), - IRLCNTR1); -} +#ifdef CONFIG_RTS7751R2D_1 + +/* Vectors for R2D-1 */ +static struct intc_vect vectors_r2d_1[] __initdata = { + INTC_IRQ(EXT, IRQ_EXT), + INTC_IRQ(RTC_T, IRQ_RTC_T), INTC_IRQ(RTC_A, IRQ_RTC_A), + INTC_IRQ(AX88796, IRQ_AX88796), INTC_IRQ(SDCARD, IRQ_SDCARD), + INTC_IRQ(CF_CD, IRQ_CF_CD), INTC_IRQ(CF_IDE, IRQ_CF_IDE), /* ng */ + INTC_IRQ(SM501, IRQ_VOYAGER), + INTC_IRQ(PCI_INTD_RTL8139, IRQ_PCI_INTD), + INTC_IRQ(PCI_INTC_PCI1520, IRQ_PCI_INTC), + INTC_IRQ(PCI_INTB_SLOT, IRQ_PCI_INTB), + INTC_IRQ(PCI_INTA_SLOT, IRQ_PCI_INTA), + INTC_IRQ(TP, IRQ_TP), +}; + +/* IRLMSK mask register layout for R2D-1 */ +static struct intc_mask_reg mask_registers_r2d_1[] __initdata = { + { 0xa4000000, 0, 16, /* IRLMSK */ + { TP, PCI_INTA_SLOT, PCI_INTB_SLOT, + PCI_INTC_PCI1520, PCI_INTD_RTL8139, + SM501, CF_IDE, CF_CD, SDCARD, AX88796, + RTC_A, RTC_T, 0, 0, 0, EXT } }, +}; + +/* IRLn to IRQ table for R2D-1 */ +static unsigned char irl2irq_r2d_1[R2D_NR_IRL] __initdata = { + IRQ_PCI_INTD, IRQ_CF_IDE, IRQ_CF_CD, IRQ_PCI_INTC, + IRQ_VOYAGER, IRQ_AX88796, IRQ_RTC_A, IRQ_RTC_T, + IRQ_SDCARD, IRQ_PCI_INTA, IRQ_PCI_INTB, IRQ_EXT, + IRQ_TP, +}; + +static DECLARE_INTC_DESC(intc_desc_r2d_1, "r2d-1", vectors_r2d_1, + NULL, NULL, mask_registers_r2d_1, NULL, NULL); + +#endif /* CONFIG_RTS7751R2D_1 */ + +#ifdef CONFIG_RTS7751R2D_PLUS + +/* Vectors for R2D-PLUS */ +static struct intc_vect vectors_r2d_plus[] __initdata = { + INTC_IRQ(EXT, IRQ_EXT), + INTC_IRQ(RTC_T, IRQ_RTC_T), INTC_IRQ(RTC_A, IRQ_RTC_A), + INTC_IRQ(KEY, IRQ_KEY), INTC_IRQ(SDCARD, IRQ_SDCARD), + INTC_IRQ(CF_CD, IRQ_CF_CD), INTC_IRQ(CF_IDE, IRQ_CF_IDE), + INTC_IRQ(SM501, IRQ_VOYAGER), + INTC_IRQ(PCI_INTD_RTL8139, IRQ_PCI_INTD), + INTC_IRQ(PCI_INTC_PCI1520, IRQ_PCI_INTC), + INTC_IRQ(PCI_INTB_RTL8139, IRQ_PCI_INTB), + INTC_IRQ(PCI_INTA_SLOT, IRQ_PCI_INTA), + INTC_IRQ(TP, IRQ_TP), +}; + +/* IRLMSK mask register layout for R2D-PLUS */ +static struct intc_mask_reg mask_registers_r2d_plus[] __initdata = { + { 0xa4000000, 0, 16, /* IRLMSK */ + { TP, PCI_INTA_SLOT, PCI_INTB_RTL8139, + PCI_INTC_PCI1520, PCI_INTD_RTL8139, + SM501, CF_IDE, CF_CD, SDCARD, KEY, + RTC_A, RTC_T, 0, 0, 0, EXT } }, +}; + +/* IRLn to IRQ table for R2D-PLUS */ +static unsigned char irl2irq_r2d_plus[R2D_NR_IRL] __initdata = { + IRQ_PCI_INTD, IRQ_CF_IDE, IRQ_CF_CD, IRQ_PCI_INTC, + IRQ_VOYAGER, IRQ_KEY, IRQ_RTC_A, IRQ_RTC_T, + IRQ_SDCARD, IRQ_PCI_INTA, IRQ_PCI_INTB, IRQ_EXT, + IRQ_TP, +}; + +static DECLARE_INTC_DESC(intc_desc_r2d_plus, "r2d-plus", vectors_r2d_plus, + NULL, NULL, mask_registers_r2d_plus, NULL, NULL); + +#endif /* CONFIG_RTS7751R2D_PLUS */ + +static unsigned char irl2irq[R2D_NR_IRL]; int rts7751r2d_irq_demux(int irq) { - return voyagergx_irq_demux(irq); -} + if (irq >= R2D_NR_IRL || !irl2irq[irq]) + return irq; -static struct irq_chip rts7751r2d_irq_chip __read_mostly = { - .name = "rts7751r2d", - .mask = disable_rts7751r2d_irq, - .unmask = enable_rts7751r2d_irq, - .mask_ack = disable_rts7751r2d_irq, -}; + return irl2irq[irq]; +} /* * Initialize IRQ setting */ void __init init_rts7751r2d_IRQ(void) { - int i; - - /* IRL0=KEY Input - * IRL1=Ethernet - * IRL2=CF Card - * IRL3=CF Card Insert - * IRL4=PCMCIA - * IRL5=VOYAGER - * IRL6=RTC Alarm - * IRL7=RTC Timer - * IRL8=SD Card - * IRL9=PCI Slot #1 - * IRL10=PCI Slot #2 - * IRL11=Extention #0 - * IRL12=Extention #1 - * IRL13=Extention #2 - * IRL14=Extention #3 - */ - - for (i=0; i<15; i++) { - disable_irq_nosync(i); - set_irq_chip_and_handler_name(i, &rts7751r2d_irq_chip, - handle_level_irq, "level"); - enable_rts7751r2d_irq(i); + struct intc_desc *d; + + switch (ctrl_inw(PA_BVERREG)) { +#ifdef CONFIG_RTS7751R2D_PLUS + case 0x10: + printk(KERN_INFO "Using R2D-PLUS interrupt controller.\n"); + d = &intc_desc_r2d_plus; + memcpy(irl2irq, irl2irq_r2d_plus, R2D_NR_IRL); + break; +#endif +#ifdef CONFIG_RTS7751R2D_1 + case 0x11: + printk(KERN_INFO "Using R2D-1 interrupt controller.\n"); + d = &intc_desc_r2d_1; + memcpy(irl2irq, irl2irq_r2d_1, R2D_NR_IRL); + break; +#endif + default: + return; } + register_intc_controller(d); +#ifdef CONFIG_MFD_SM501 setup_voyagergx_irq(); +#endif } diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c index 6f7029d..37f2c0b 100644 --- a/arch/sh/boards/renesas/rts7751r2d/setup.c +++ b/arch/sh/boards/renesas/rts7751r2d/setup.c @@ -45,20 +45,16 @@ static void __init voyagergx_serial_init static struct resource cf_ide_resources[] = { [0] = { .start = PA_AREA5_IO + 0x1000, - .end = PA_AREA5_IO + 0x1000 + 0x08 - 1, + .end = PA_AREA5_IO + 0x1000 + 0x10 - 0x2, .flags = IORESOURCE_MEM, }, [1] = { .start = PA_AREA5_IO + 0x80c, - .end = PA_AREA5_IO + 0x80c + 0x16 - 1, + .end = PA_AREA5_IO + 0x80c, .flags = IORESOURCE_MEM, }, [2] = { -#ifdef CONFIG_RTS7751R2D_REV11 - .start = 1, -#else - .start = 2, -#endif + .start = IRQ_CF_IDE, .flags = IORESOURCE_IRQ, }, }; @@ -77,12 +73,28 @@ static struct platform_device cf_ide_dev }, }; +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_OUTPORT, + .end = PA_OUTPORT, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +#ifdef CONFIG_MFD_SM501 static struct plat_serial8250_port uart_platform_data[] = { { .membase = (void __iomem *)VOYAGER_UART_BASE, .mapbase = VOYAGER_UART_BASE, .iotype = UPIO_MEM, - .irq = VOYAGER_UART0_IRQ, + .irq = IRQ_SM501_U0, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, .regshift = 2, .uartclk = (9600 * 16), @@ -98,21 +110,6 @@ static struct platform_device uart_devic }, }; -static struct resource heartbeat_resources[] = { - [0] = { - .start = PA_OUTPORT, - .end = PA_OUTPORT + 8 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device heartbeat_device = { - .name = "heartbeat", - .id = -1, - .num_resources = ARRAY_SIZE(heartbeat_resources), - .resource = heartbeat_resources, -}; - static struct resource sm501_resources[] = { [0] = { .start = 0x10000000, @@ -125,7 +122,7 @@ static struct resource sm501_resources[] .flags = IORESOURCE_MEM, }, [2] = { - .start = 32, + .start = IRQ_SM501_CV, .flags = IORESOURCE_IRQ, }, }; @@ -137,22 +134,19 @@ static struct platform_device sm501_devi .resource = sm501_resources, }; +#endif /* CONFIG_MFD_SM501 */ + static struct platform_device *rts7751r2d_devices[] __initdata = { +#ifdef CONFIG_MFD_SM501 &uart_device, - &heartbeat_device, &sm501_device, +#endif + &cf_ide_device, + &heartbeat_device, }; static int __init rts7751r2d_devices_setup(void) { - int ret; - - if (ctrl_inw(PA_BVERREG) == 0x10) { /* only working on R2D-PLUS */ - ret = platform_device_register(&cf_ide_device); - if (ret) - return ret; - } - return platform_add_devices(rts7751r2d_devices, ARRAY_SIZE(rts7751r2d_devices)); } @@ -163,6 +157,34 @@ static void rts7751r2d_power_off(void) ctrl_outw(0x0001, PA_POWOFF); } +static inline unsigned char is_ide_ioaddr(unsigned long addr) +{ + return ((cf_ide_resources[0].start <= addr && + addr <= cf_ide_resources[0].end) || + (cf_ide_resources[1].start <= addr && + addr <= cf_ide_resources[1].end)); +} + +void rts7751r2d_writeb(u8 b, void __iomem *addr) +{ + unsigned long tmp = (unsigned long __force)addr; + + if (is_ide_ioaddr(tmp)) + ctrl_outw((u16)b, tmp); + else + ctrl_outb(b, tmp); +} + +u8 rts7751r2d_readb(void __iomem *addr) +{ + unsigned long tmp = (unsigned long __force)addr; + + if (is_ide_ioaddr(tmp)) + return ctrl_inw(tmp) & 0xff; + else + return ctrl_inb(tmp); +} + /* * Initialize the board */ @@ -187,12 +209,11 @@ static void __init rts7751r2d_setup(char static struct sh_machine_vector mv_rts7751r2d __initmv = { .mv_name = "RTS7751R2D", .mv_setup = rts7751r2d_setup, - .mv_nr_irqs = 72, - .mv_init_irq = init_rts7751r2d_IRQ, .mv_irq_demux = rts7751r2d_irq_demux, - -#ifdef CONFIG_USB_SM501 + .mv_writeb = rts7751r2d_writeb, + .mv_readb = rts7751r2d_readb, +#if defined(CONFIG_MFD_SM501) && defined(CONFIG_USB_OHCI_HCD) .mv_consistent_alloc = voyagergx_consistent_alloc, .mv_consistent_free = voyagergx_consistent_free, #endif diff --git a/arch/sh/boards/renesas/x3proto/Makefile b/arch/sh/boards/renesas/x3proto/Makefile new file mode 100644 index 0000000..983e455 --- /dev/null +++ b/arch/sh/boards/renesas/x3proto/Makefile @@ -0,0 +1 @@ +obj-y += setup.o ilsel.o diff --git a/arch/sh/boards/renesas/x3proto/ilsel.c b/arch/sh/boards/renesas/x3proto/ilsel.c new file mode 100644 index 0000000..6d4454f --- /dev/null +++ b/arch/sh/boards/renesas/x3proto/ilsel.c @@ -0,0 +1,151 @@ +/* + * arch/sh/boards/renesas/x3proto/ilsel.c + * + * Helper routines for SH-X3 proto board ILSEL. + * + * Copyright (C) 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include + +/* + * ILSEL is split across: + * + * ILSEL0 - 0xb8100004 [ Levels 1 - 4 ] + * ILSEL1 - 0xb8100006 [ Levels 5 - 8 ] + * ILSEL2 - 0xb8100008 [ Levels 9 - 12 ] + * ILSEL3 - 0xb810000a [ Levels 13 - 15 ] + * + * With each level being relative to an ilsel_source_t. + */ +#define ILSEL_BASE 0xb8100004 +#define ILSEL_LEVELS 15 + +/* + * ILSEL level map, in descending order from the highest level down. + * + * Supported levels are 1 - 15 spread across ILSEL0 - ILSEL4, mapping + * directly to IRLs. As the IRQs are numbered in reverse order relative + * to the interrupt level, the level map is carefully managed to ensure a + * 1:1 mapping between the bit position and the IRQ number. + * + * This careful constructions allows ilsel_enable*() to be referenced + * directly for hooking up an ILSEL set and getting back an IRQ which can + * subsequently be used for internal accounting in the (optional) disable + * path. + */ +static unsigned long ilsel_level_map; + +static inline unsigned int ilsel_offset(unsigned int bit) +{ + return ILSEL_LEVELS - bit - 1; +} + +static inline unsigned long mk_ilsel_addr(unsigned int bit) +{ + return ILSEL_BASE + ((ilsel_offset(bit) >> 1) & ~0x1); +} + +static inline unsigned int mk_ilsel_shift(unsigned int bit) +{ + return (ilsel_offset(bit) & 0x3) << 2; +} + +static void __ilsel_enable(ilsel_source_t set, unsigned int bit) +{ + unsigned int tmp, shift; + unsigned long addr; + + addr = mk_ilsel_addr(bit); + shift = mk_ilsel_shift(bit); + + pr_debug("%s: bit#%d: addr - 0x%08lx (shift %d, set %d)\n", + __FUNCTION__, bit, addr, shift, set); + + tmp = ctrl_inw(addr); + tmp &= ~(0xf << shift); + tmp |= set << shift; + ctrl_outw(tmp, addr); +} + +/** + * ilsel_enable - Enable an ILSEL set. + * @set: ILSEL source (see ilsel_source_t enum in include/asm-sh/ilsel.h). + * + * Enables a given non-aliased ILSEL source (<= ILSEL_KEY) at the highest + * available interrupt level. Callers should take care to order callsites + * noting descending interrupt levels. Aliasing FPGA and external board + * IRQs need to use ilsel_enable_fixed(). + * + * The return value is an IRQ number that can later be taken down with + * ilsel_disable(). + */ +int ilsel_enable(ilsel_source_t set) +{ + unsigned int bit; + + /* Aliased sources must use ilsel_enable_fixed() */ + BUG_ON(set > ILSEL_KEY); + + do { + bit = find_first_zero_bit(&ilsel_level_map, ILSEL_LEVELS); + } while (test_and_set_bit(bit, &ilsel_level_map)); + + __ilsel_enable(set, bit); + + return bit; +} +EXPORT_SYMBOL_GPL(ilsel_enable); + +/** + * ilsel_enable_fixed - Enable an ILSEL set at a fixed interrupt level + * @set: ILSEL source (see ilsel_source_t enum in include/asm-sh/ilsel.h). + * @level: Interrupt level (1 - 15) + * + * Enables a given ILSEL source at a fixed interrupt level. Necessary + * both for level reservation as well as for aliased sources that only + * exist on special ILSEL#s. + * + * Returns an IRQ number (as ilsel_enable()). + */ +int ilsel_enable_fixed(ilsel_source_t set, unsigned int level) +{ + unsigned int bit = ilsel_offset(level - 1); + + if (test_and_set_bit(bit, &ilsel_level_map)) + return -EBUSY; + + __ilsel_enable(set, bit); + + return bit; +} +EXPORT_SYMBOL_GPL(ilsel_enable_fixed); + +/** + * ilsel_disable - Disable an ILSEL set + * @irq: Bit position for ILSEL set value (retval from enable routines) + * + * Disable a previously enabled ILSEL set. + */ +void ilsel_disable(unsigned int irq) +{ + unsigned long addr; + unsigned int tmp; + + addr = mk_ilsel_addr(irq); + + tmp = ctrl_inw(addr); + tmp &= ~(0xf << mk_ilsel_shift(irq)); + ctrl_outw(tmp, addr); + + clear_bit(irq, &ilsel_level_map); +} +EXPORT_SYMBOL_GPL(ilsel_disable); diff --git a/arch/sh/boards/renesas/x3proto/setup.c b/arch/sh/boards/renesas/x3proto/setup.c new file mode 100644 index 0000000..abc5b6d --- /dev/null +++ b/arch/sh/boards/renesas/x3proto/setup.c @@ -0,0 +1,136 @@ +/* + * arch/sh/boards/renesas/x3proto/setup.c + * + * Renesas SH-X3 Prototype Board Support. + * + * Copyright (C) 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include + +static struct resource heartbeat_resources[] = { + [0] = { + .start = 0xb8140020, + .end = 0xb8140020, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct resource smc91x_resources[] = { + [0] = { + .start = 0x18000300, + .end = 0x18000300 + 0x10 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* Filled in by ilsel */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = -1, + .resource = smc91x_resources, + .num_resources = ARRAY_SIZE(smc91x_resources), +}; + +static struct resource r8a66597_usb_host_resources[] = { + [0] = { + .name = "r8a66597_hcd", + .start = 0x18040000, + .end = 0x18080000 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "r8a66597_hcd", + /* Filled in by ilsel */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device r8a66597_usb_host_device = { + .name = "r8a66597_hcd", + .id = -1, + .dev = { + .dma_mask = NULL, /* don't use dma */ + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources), + .resource = r8a66597_usb_host_resources, +}; + +static struct resource m66592_usb_peripheral_resources[] = { + [0] = { + .name = "m66592_udc", + .start = 0x18080000, + .end = 0x180c0000 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "m66592_udc", + /* Filled in by ilsel */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device m66592_usb_peripheral_device = { + .name = "m66592_udc", + .id = -1, + .dev = { + .dma_mask = NULL, /* don't use dma */ + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(m66592_usb_peripheral_resources), + .resource = m66592_usb_peripheral_resources, +}; + +static struct platform_device *x3proto_devices[] __initdata = { + &heartbeat_device, + &smc91x_device, + &r8a66597_usb_host_device, + &m66592_usb_peripheral_device, +}; + +static int __init x3proto_devices_setup(void) +{ + r8a66597_usb_host_resources[1].start = + r8a66597_usb_host_resources[1].end = ilsel_enable(ILSEL_USBH_I); + + m66592_usb_peripheral_resources[1].start = + m66592_usb_peripheral_resources[1].end = ilsel_enable(ILSEL_USBP_I); + + smc91x_resources[1].start = + smc91x_resources[1].end = ilsel_enable(ILSEL_LAN); + + return platform_add_devices(x3proto_devices, + ARRAY_SIZE(x3proto_devices)); +} +device_initcall(x3proto_devices_setup); + +static void __init x3proto_init_irq(void) +{ + plat_irq_setup_pins(IRQ_MODE_IRL3210); + + /* Set ICR0.LVLMODE */ + ctrl_outl(ctrl_inl(0xfe410000) | (1 << 21), 0xfe410000); +} + +static struct sh_machine_vector mv_x3proto __initmv = { + .mv_name = "x3proto", + .mv_init_irq = x3proto_init_irq, +}; diff --git a/arch/sh/boards/se/7206/io.c b/arch/sh/boards/se/7206/io.c index b557273..1308e61 100644 --- a/arch/sh/boards/se/7206/io.c +++ b/arch/sh/boards/se/7206/io.c @@ -26,22 +26,24 @@ static inline void delay(void) static inline volatile __u16 * port2adr(unsigned int port) { - if (port >= 0x2000) + if (port >= 0x2000 && port < 0x2020) return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); - else if (port >= 0x300 || port < 0x310) + else if (port >= 0x300 && port < 0x310) return (volatile __u16 *) (PA_SMSC + (port - 0x300)); + + return (volatile __u16 *)port; } unsigned char se7206_inb(unsigned long port) { - return (*port2adr(port))&0xff; + return (*port2adr(port)) & 0xff; } unsigned char se7206_inb_p(unsigned long port) { unsigned long v; - v = (*port2adr(port))&0xff; + v = (*port2adr(port)) & 0xff; delay(); return v; } @@ -51,12 +53,6 @@ unsigned short se7206_inw(unsigned long return *port2adr(port);; } -unsigned int se7206_inl(unsigned long port) -{ - maybebadio(port); - return 0; -} - void se7206_outb(unsigned char value, unsigned long port) { *(port2adr(port)) = value; @@ -73,11 +69,6 @@ void se7206_outw(unsigned short value, u *port2adr(port) = value; } -void se7206_outl(unsigned int value, unsigned long port) -{ - maybebadio(port); -} - void se7206_insb(unsigned long port, void *addr, unsigned long count) { volatile __u16 *p = port2adr(port); @@ -95,11 +86,6 @@ void se7206_insw(unsigned long port, voi *ap++ = *p; } -void se7206_insl(unsigned long port, void *addr, unsigned long count) -{ - maybebadio(port); -} - void se7206_outsb(unsigned long port, const void *addr, unsigned long count) { volatile __u16 *p = port2adr(port); @@ -116,8 +102,3 @@ void se7206_outsw(unsigned long port, co while (count--) *p = *ap++; } - -void se7206_outsl(unsigned long port, const void *addr, unsigned long count) -{ - maybebadio(port); -} diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/se/7206/setup.c index a074b62..5b3ee08 100644 --- a/arch/sh/boards/se/7206/setup.c +++ b/arch/sh/boards/se/7206/setup.c @@ -6,14 +6,13 @@ * Copyright (C) 2007 Paul Mundt * * Hitachi 7206 SolutionEngine Support. - * */ - #include #include #include #include #include +#include static struct resource smc91x_resources[] = { [0] = { @@ -37,10 +36,16 @@ static struct platform_device smc91x_dev static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; +static struct heartbeat_data heartbeat_data = { + .bit_pos = heartbeat_bit_pos, + .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), + .regsize = 32, +}; + static struct resource heartbeat_resources[] = { [0] = { .start = PA_LED, - .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .end = PA_LED, .flags = IORESOURCE_MEM, }, }; @@ -49,7 +54,7 @@ static struct platform_device heartbeat_ .name = "heartbeat", .id = -1, .dev = { - .platform_data = heartbeat_bit_pos, + .platform_data = &heartbeat_data, }, .num_resources = ARRAY_SIZE(heartbeat_resources), .resource = heartbeat_resources, @@ -75,24 +80,18 @@ static struct sh_machine_vector mv_se __ .mv_nr_irqs = 256, .mv_inb = se7206_inb, .mv_inw = se7206_inw, - .mv_inl = se7206_inl, .mv_outb = se7206_outb, .mv_outw = se7206_outw, - .mv_outl = se7206_outl, .mv_inb_p = se7206_inb_p, .mv_inw_p = se7206_inw, - .mv_inl_p = se7206_inl, .mv_outb_p = se7206_outb_p, .mv_outw_p = se7206_outw, - .mv_outl_p = se7206_outl, .mv_insb = se7206_insb, .mv_insw = se7206_insw, - .mv_insl = se7206_insl, .mv_outsb = se7206_outsb, .mv_outsw = se7206_outsw, - .mv_outsl = se7206_outsl, .mv_init_irq = init_se7206_IRQ, }; diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c index 8fec155..c9431b3 100644 --- a/arch/sh/boards/se/7343/setup.c +++ b/arch/sh/boards/se/7343/setup.c @@ -33,7 +33,7 @@ static struct platform_device smc91x_dev static struct resource heartbeat_resources[] = { [0] = { .start = PA_LED, - .end = PA_LED + 8 - 1, + .end = PA_LED, .flags = IORESOURCE_MEM, }, }; diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c index 2962da1..d07a336 100644 --- a/arch/sh/boards/se/770x/setup.c +++ b/arch/sh/boards/se/770x/setup.c @@ -12,6 +12,7 @@ #include #include #include #include +#include void init_se_IRQ(void); @@ -90,10 +91,15 @@ static struct platform_device cf_ide_dev static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; +static struct heartbeat_data heartbeat_data = { + .bit_pos = heartbeat_bit_pos, + .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), +}; + static struct resource heartbeat_resources[] = { [0] = { .start = PA_LED, - .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .end = PA_LED, .flags = IORESOURCE_MEM, }, }; @@ -102,7 +108,7 @@ static struct platform_device heartbeat_ .name = "heartbeat", .id = -1, .dev = { - .platform_data = heartbeat_bit_pos, + .platform_data = &heartbeat_data, }, .num_resources = ARRAY_SIZE(heartbeat_resources), .resource = heartbeat_resources, diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c index 495fc7e..03b6345 100644 --- a/arch/sh/boards/se/7722/setup.c +++ b/arch/sh/boards/se/7722/setup.c @@ -18,12 +18,10 @@ #include #include /* Heartbeat */ -static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3, 4, 5, 6, 7 }; - static struct resource heartbeat_resources[] = { [0] = { .start = PA_LED, - .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .end = PA_LED, .flags = IORESOURCE_MEM, }, }; @@ -31,9 +29,6 @@ static struct resource heartbeat_resourc static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, - .dev = { - .platform_data = heartbeat_bit_pos, - }, .num_resources = ARRAY_SIZE(heartbeat_resources), .resource = heartbeat_resources, }; @@ -109,7 +104,7 @@ static void __init se7722_setup(char **c ctrl_outl(0x00051001, MSTPCR0); ctrl_outl(0x00000000, MSTPCR1); /* KEYSC, VOU, BEU, CEU, VEU, VPU, LCDC */ - ctrl_outl(0xffffbfC0, MSTPCR2); + ctrl_outl(0xffffbfC0, MSTPCR2); ctrl_outw(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */ ctrl_outw(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */ diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c index 7873d07..deefbfd 100644 --- a/arch/sh/boards/se/7751/setup.c +++ b/arch/sh/boards/se/7751/setup.c @@ -13,13 +13,19 @@ #include #include #include #include +#include static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; +static struct heartbeat_data heartbeat_data = { + .bit_pos = heartbeat_bit_pos, + .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), +}; + static struct resource heartbeat_resources[] = { [0] = { .start = PA_LED, - .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .end = PA_LED, .flags = IORESOURCE_MEM, }, }; @@ -28,14 +34,13 @@ static struct platform_device heartbeat_ .name = "heartbeat", .id = -1, .dev = { - .platform_data = heartbeat_bit_pos, + .platform_data = &heartbeat_data, }, .num_resources = ARRAY_SIZE(heartbeat_resources), .resource = heartbeat_resources, }; static struct platform_device *se7751_devices[] __initdata = { - &smc91x_device, &heartbeat_device, }; diff --git a/arch/sh/boards/se/7780/irq.c b/arch/sh/boards/se/7780/irq.c index 8749147..6bd70da 100644 --- a/arch/sh/boards/se/7780/irq.c +++ b/arch/sh/boards/se/7780/irq.c @@ -16,32 +16,6 @@ #include #include #include -static struct intc2_data intc2_irq_table[] = { - { 2, 0, 31, 0, 31, 3 }, /* daughter board EXTINT1 */ - { 4, 0, 30, 0, 30, 3 }, /* daughter board EXTINT2 */ - { 6, 0, 29, 0, 29, 3 }, /* daughter board EXTINT3 */ - { 8, 0, 28, 0, 28, 3 }, /* SMC 91C111 (LAN) */ - { 10, 0, 27, 0, 27, 3 }, /* daughter board EXTINT4 */ - { 4, 0, 30, 0, 30, 3 }, /* daughter board EXTINT5 */ - { 2, 0, 31, 0, 31, 3 }, /* daughter board EXTINT6 */ - { 2, 0, 31, 0, 31, 3 }, /* daughter board EXTINT7 */ - { 2, 0, 31, 0, 31, 3 }, /* daughter board EXTINT8 */ - { 0 , 0, 24, 0, 24, 3 }, /* SM501 */ -}; - -static struct intc2_desc intc2_irq_desc __read_mostly = { - .prio_base = 0, /* N/A */ - .msk_base = 0xffd00044, - .mskclr_base = 0xffd00064, - - .intc2_data = intc2_irq_table, - .nr_irqs = ARRAY_SIZE(intc2_irq_table), - - .chip = { - .name = "INTC2-se7780", - }, -}; - /* * Initialize IRQ setting */ @@ -68,5 +42,5 @@ void __init init_se7780_IRQ(void) /* FPGA + 0x0A */ ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3); - register_intc2_controller(&intc2_irq_desc); + plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */ } diff --git a/arch/sh/boards/se/7780/setup.c b/arch/sh/boards/se/7780/setup.c index 723f2fd..76e53b2 100644 --- a/arch/sh/boards/se/7780/setup.c +++ b/arch/sh/boards/se/7780/setup.c @@ -16,12 +16,10 @@ #include #include /* Heartbeat */ -static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3, 4, 5, 6, 7 }; - static struct resource heartbeat_resources[] = { [0] = { .start = PA_LED, - .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .end = PA_LED, .flags = IORESOURCE_MEM, }, }; @@ -29,9 +27,6 @@ static struct resource heartbeat_resourc static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, - .dev = { - .platform_data = heartbeat_bit_pos, - }, .num_resources = ARRAY_SIZE(heartbeat_resources), .resource = heartbeat_resources, }; diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/sh03/setup.c index 9c031a8..934ac4f 100644 --- a/arch/sh/boards/sh03/setup.c +++ b/arch/sh/boards/sh03/setup.c @@ -15,33 +15,9 @@ #include #include #include -static struct ipr_data ipr_irq_table[] = { - { IRL0_IRQ, 0, IRL0_IPR_POS, IRL0_PRIORITY }, - { IRL1_IRQ, 0, IRL1_IPR_POS, IRL1_PRIORITY }, - { IRL2_IRQ, 0, IRL2_IPR_POS, IRL2_PRIORITY }, - { IRL3_IRQ, 0, IRL3_IPR_POS, IRL3_PRIORITY }, -}; - -static unsigned long ipr_offsets[] = { - INTC_IPRD, -}; - -static struct ipr_desc ipr_irq_desc = { - .ipr_offsets = ipr_offsets, - .nr_offsets = ARRAY_SIZE(ipr_offsets), - - .ipr_data = ipr_irq_table, - .nr_irqs = ARRAY_SIZE(ipr_irq_table), - - .chip = { - .name = "IPR-sh03", - }, -}; - static void __init init_sh03_IRQ(void) { - ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); - register_ipr_controller(&ipr_irq_desc); + plat_irq_setup_pins(IRQ_MODE_IRQ); } extern void *cf_io_base; @@ -68,7 +44,7 @@ static void __init sh03_setup(char **cmd static struct resource heartbeat_resources[] = { [0] = { .start = 0xa0800000, - .end = 0xa0800000 + 8 - 1, + .end = 0xa0800000, .flags = IORESOURCE_MEM, }, }; diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/shmin/setup.c index dfd1245..16e5dae 100644 --- a/arch/sh/boards/shmin/setup.c +++ b/arch/sh/boards/shmin/setup.c @@ -14,36 +14,12 @@ #include #define PFC_PHCR 0xa400010eUL #define INTC_ICR1 0xa4000010UL -#define INTC_IPRC 0xa4000016UL - -static struct ipr_data ipr_irq_table[] = { - { 32, 0, 0, 0 }, - { 33, 0, 4, 0 }, - { 34, 0, 8, 8 }, - { 35, 0, 12, 0 }, -}; - -static unsigned long ipr_offsets[] = { - INTC_IPRC, -}; - -static struct ipr_desc ipr_irq_desc = { - .ipr_offsets = ipr_offsets, - .nr_offsets = ARRAY_SIZE(ipr_offsets), - - .ipr_data = ipr_irq_table, - .nr_irqs = ARRAY_SIZE(ipr_irq_table), - - .chip = { - .name = "IPR-shmin", - }, -}; static void __init init_shmin_irq(void) { ctrl_outw(0x2a00, PFC_PHCR); // IRQ0-3=IRQ ctrl_outw(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active. - register_ipr_controller(&ipr_irq_desc); + plat_irq_setup_pins(IRQ_MODE_IRQ); } static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size) diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c index 84271d8..2b594f6 100644 --- a/arch/sh/boards/snapgear/setup.c +++ b/arch/sh/boards/snapgear/setup.c @@ -68,37 +68,11 @@ module_init(eraseconfig_init); * IRL3 = crypto */ -static struct ipr_data ipr_irq_table[] = { - { IRL0_IRQ, 0, IRL0_IPR_POS, IRL0_PRIORITY }, - { IRL1_IRQ, 0, IRL1_IPR_POS, IRL1_PRIORITY }, - { IRL2_IRQ, 0, IRL2_IPR_POS, IRL2_PRIORITY }, - { IRL3_IRQ, 0, IRL3_IPR_POS, IRL3_PRIORITY }, -}; - -static unsigned long ipr_offsets[] = { - INTC_IPRD, -}; - -static struct ipr_desc ipr_irq_desc = { - .ipr_offsets = ipr_offsets, - .nr_offsets = ARRAY_SIZE(ipr_offsets), - - .ipr_data = ipr_irq_table, - .nr_irqs = ARRAY_SIZE(ipr_irq_table), - - .chip = { - .name = "IPR-snapgear", - }, -}; - static void __init init_snapgear_IRQ(void) { - /* enable individual interrupt mode for externals */ - ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); - printk("Setup SnapGear IRQ/IPR ...\n"); - - register_ipr_controller(&ipr_irq_desc); + /* enable individual interrupt mode for externals */ + plat_irq_setup_pins(IRQ_MODE_IRQ); } /* diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/titan/setup.c index 606d25a..5de3b2a 100644 --- a/arch/sh/boards/titan/setup.c +++ b/arch/sh/boards/titan/setup.c @@ -12,38 +12,10 @@ #include #include #include -static struct ipr_data ipr_irq_table[] = { - /* IRQ, IPR idx, shift, prio */ - { TITAN_IRQ_WAN, 3, 12, 8 }, /* eth0 (WAN) */ - { TITAN_IRQ_LAN, 3, 8, 8 }, /* eth1 (LAN) */ - { TITAN_IRQ_MPCIA, 3, 4, 8 }, /* mPCI A (top) */ - { TITAN_IRQ_USB, 3, 0, 8 }, /* mPCI B (bottom), USB */ -}; - -static unsigned long ipr_offsets[] = { /* stolen from setup-sh7750.c */ - 0xffd00004UL, /* 0: IPRA */ - 0xffd00008UL, /* 1: IPRB */ - 0xffd0000cUL, /* 2: IPRC */ - 0xffd00010UL, /* 3: IPRD */ -}; - -static struct ipr_desc ipr_irq_desc = { - .ipr_offsets = ipr_offsets, - .nr_offsets = ARRAY_SIZE(ipr_offsets), - - .ipr_data = ipr_irq_table, - .nr_irqs = ARRAY_SIZE(ipr_irq_table), - - .chip = { - .name = "IPR-titan", - }, -}; static void __init init_titan_irq(void) { /* enable individual interrupt mode for externals */ - ipr_irq_enable_irlm(); - /* register ipr irqs */ - register_ipr_controller(&ipr_irq_desc); + plat_irq_setup_pins(IRQ_MODE_IRQ); } static struct sh_machine_vector mv_titan __initmv = { diff --git a/arch/sh/cchips/Kconfig b/arch/sh/cchips/Kconfig index 2e516e9..7892361 100644 --- a/arch/sh/cchips/Kconfig +++ b/arch/sh/cchips/Kconfig @@ -1,18 +1,5 @@ menu "Companion Chips" -config VOYAGERGX - bool "VoyagerGX chip support" - depends on SH_RTS7751R2D - help - Selecting this option will support Silicon Motion, Inc. SM501. - Designed to complement needs for the embedded industry, it - provides video and 2D capability. To reduce system cost a - wide variety of include I/O is supported, including analog RGB - and digital LCD Panel interface, 8-bit parallel interface, USB, - UART, IrDA, Zoom Video, AC97 or I2S, SSP, PWM, and I2C. There - are additional GPIO bits that can be used to interface to - external as well. - config HD6446X_SERIES bool diff --git a/arch/sh/cchips/hd6446x/hd64461.c b/arch/sh/cchips/hd6446x/hd64461.c index 97f6512..b77754d 100644 --- a/arch/sh/cchips/hd6446x/hd64461.c +++ b/arch/sh/cchips/hd6446x/hd64461.c @@ -14,6 +14,9 @@ #include #include #include +/* This belongs in cpu specific */ +#define INTC_ICR1 0xA4140010UL + static void disable_hd64461_irq(unsigned int irq) { unsigned short nimr; @@ -121,7 +124,7 @@ int hd64461_irq_demux(int irq) } } } - return __irq_demux(irq); + return irq; } static struct irqaction irq0 = { hd64461_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "HD64461", NULL, NULL }; @@ -143,6 +146,7 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7709) / #endif outw(0xffff, HD64461_NIMR); + /* IRQ 80 -> 95 belongs to HD64461 */ for (i = HD64461_IRQBASE; i < HD64461_IRQBASE + 16; i++) { irq_desc[i].chip = &hd64461_irq_type; } diff --git a/arch/sh/cchips/voyagergx/irq.c b/arch/sh/cchips/voyagergx/irq.c index d70e5c8..ade3038 100644 --- a/arch/sh/cchips/voyagergx/irq.c +++ b/arch/sh/cchips/voyagergx/irq.c @@ -23,149 +23,79 @@ #include #include #include -static void disable_voyagergx_irq(unsigned int irq) -{ - unsigned long val; - unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE); - - pr_debug("disable_voyagergx_irq(%d): mask=%lx\n", irq, mask); - val = readl((void __iomem *)VOYAGER_INT_MASK); - val &= ~mask; - writel(val, (void __iomem *)VOYAGER_INT_MASK); -} - -static void enable_voyagergx_irq(unsigned int irq) -{ - unsigned long val; - unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE); - - pr_debug("disable_voyagergx_irq(%d): mask=%lx\n", irq, mask); - val = readl((void __iomem *)VOYAGER_INT_MASK); - val |= mask; - writel(val, (void __iomem *)VOYAGER_INT_MASK); -} - -static void mask_and_ack_voyagergx(unsigned int irq) -{ - disable_voyagergx_irq(irq); -} - -static void end_voyagergx_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_voyagergx_irq(irq); -} - -static unsigned int startup_voyagergx_irq(unsigned int irq) -{ - enable_voyagergx_irq(irq); - return 0; -} - -static void shutdown_voyagergx_irq(unsigned int irq) -{ - disable_voyagergx_irq(irq); -} - -static struct hw_interrupt_type voyagergx_irq_type = { - .typename = "VOYAGERGX-IRQ", - .startup = startup_voyagergx_irq, - .shutdown = shutdown_voyagergx_irq, - .enable = enable_voyagergx_irq, - .disable = disable_voyagergx_irq, - .ack = mask_and_ack_voyagergx, - .end = end_voyagergx_irq, +enum { + UNUSED = 0, + + /* voyager specific interrupt sources */ + UP, G54, G53, G52, G51, G50, G49, G48, + I2C, PW, DMA, PCI, I2S, AC, US, + U1, U0, CV, MC, S1, S0, + UH, TWOD, ZD, PV, CI, }; -static irqreturn_t voyagergx_interrupt(int irq, void *dev_id) -{ - printk(KERN_INFO - "VoyagerGX: spurious interrupt, status: 0x%x\n", - (unsigned int)readl((void __iomem *)INT_STATUS)); - return IRQ_HANDLED; -} - -static struct { - int (*func)(int, void *); - void *dev; -} voyagergx_demux[VOYAGER_IRQ_NUM]; +static struct intc_vect vectors[] __initdata = { + INTC_IRQ(UP, IRQ_SM501_UP), INTC_IRQ(G54, IRQ_SM501_G54), + INTC_IRQ(G53, IRQ_SM501_G53), INTC_IRQ(G52, IRQ_SM501_G52), + INTC_IRQ(G51, IRQ_SM501_G51), INTC_IRQ(G50, IRQ_SM501_G50), + INTC_IRQ(G49, IRQ_SM501_G49), INTC_IRQ(G48, IRQ_SM501_G48), + INTC_IRQ(I2C, IRQ_SM501_I2C), INTC_IRQ(PW, IRQ_SM501_PW), + INTC_IRQ(DMA, IRQ_SM501_DMA), INTC_IRQ(PCI, IRQ_SM501_PCI), + INTC_IRQ(I2S, IRQ_SM501_I2S), INTC_IRQ(AC, IRQ_SM501_AC), + INTC_IRQ(US, IRQ_SM501_US), INTC_IRQ(U1, IRQ_SM501_U1), + INTC_IRQ(U0, IRQ_SM501_U0), INTC_IRQ(CV, IRQ_SM501_CV), + INTC_IRQ(MC, IRQ_SM501_MC), INTC_IRQ(S1, IRQ_SM501_S1), + INTC_IRQ(S0, IRQ_SM501_S0), INTC_IRQ(UH, IRQ_SM501_UH), + INTC_IRQ(TWOD, IRQ_SM501_2D), INTC_IRQ(ZD, IRQ_SM501_ZD), + INTC_IRQ(PV, IRQ_SM501_PV), INTC_IRQ(CI, IRQ_SM501_CI), +}; -void voyagergx_register_irq_demux(int irq, - int (*demux)(int irq, void *dev), void *dev) -{ - voyagergx_demux[irq - VOYAGER_IRQ_BASE].func = demux; - voyagergx_demux[irq - VOYAGER_IRQ_BASE].dev = dev; -} +static struct intc_mask_reg mask_registers[] __initdata = { + { VOYAGER_INT_MASK, 0, 32, /* "Interrupt Mask", MMIO_base + 0x30 */ + { UP, G54, G53, G52, G51, G50, G49, G48, + I2C, PW, 0, DMA, PCI, I2S, AC, US, + 0, 0, U1, U0, CV, MC, S1, S0, + 0, UH, 0, 0, TWOD, ZD, PV, CI } }, +}; -void voyagergx_unregister_irq_demux(int irq) -{ - voyagergx_demux[irq - VOYAGER_IRQ_BASE].func = 0; -} +static DECLARE_INTC_DESC(intc_desc, "voyagergx", vectors, + NULL, NULL, mask_registers, NULL, NULL); + +static unsigned int voyagergx_stat2irq[32] = { + IRQ_SM501_CI, IRQ_SM501_PV, IRQ_SM501_ZD, IRQ_SM501_2D, + 0, 0, IRQ_SM501_UH, 0, + IRQ_SM501_S0, IRQ_SM501_S1, IRQ_SM501_MC, IRQ_SM501_CV, + IRQ_SM501_U0, IRQ_SM501_U1, 0, 0, + IRQ_SM501_US, IRQ_SM501_AC, IRQ_SM501_I2S, IRQ_SM501_PCI, + IRQ_SM501_DMA, 0, IRQ_SM501_PW, IRQ_SM501_I2C, + IRQ_SM501_G48, IRQ_SM501_G49, IRQ_SM501_G50, IRQ_SM501_G51, + IRQ_SM501_G52, IRQ_SM501_G53, IRQ_SM501_G54, IRQ_SM501_UP +}; -int voyagergx_irq_demux(int irq) +static void voyagergx_irq_demux(unsigned int irq, struct irq_desc *desc) { - - if (irq == IRQ_VOYAGER ) { - unsigned long i = 0, bit __attribute__ ((unused)); - unsigned long val = readl((void __iomem *)INT_STATUS); - - if (val & (1 << 1)) - i = 1; - else if (val & (1 << 2)) - i = 2; - else if (val & (1 << 6)) - i = 6; - else if (val & (1 << 10)) - i = 10; - else if (val & (1 << 11)) - i = 11; - else if (val & (1 << 12)) - i = 12; - else if (val & (1 << 17)) - i = 17; - else - printk("Unexpected IRQ irq = %d status = 0x%08lx\n", irq, val); - pr_debug("voyagergx_irq_demux %ld \n", i); - if (i < VOYAGER_IRQ_NUM) { - irq = VOYAGER_IRQ_BASE + i; - if (voyagergx_demux[i].func != 0) - irq = voyagergx_demux[i].func(irq, - voyagergx_demux[i].dev); + unsigned long intv = ctrl_inl(INT_STATUS); + struct irq_desc *ext_desc; + unsigned int ext_irq; + unsigned int k = 0; + + while (intv) { + ext_irq = voyagergx_stat2irq[k]; + if (ext_irq && (intv & 1)) { + ext_desc = irq_desc + ext_irq; + handle_level_irq(ext_irq, ext_desc); } + intv >>= 1; + k++; } - return irq; } -static struct irqaction irq0 = { - .name = "voyagergx", - .handler = voyagergx_interrupt, - .flags = IRQF_DISABLED, - .mask = CPU_MASK_NONE, -}; - void __init setup_voyagergx_irq(void) { - int i, flag; - - printk(KERN_INFO "VoyagerGX configured at 0x%x on irq %d(mapped into %d to %d)\n", - VOYAGER_BASE, + printk(KERN_INFO "VoyagerGX on irq %d (mapped into %d to %d)\n", IRQ_VOYAGER, VOYAGER_IRQ_BASE, VOYAGER_IRQ_BASE + VOYAGER_IRQ_NUM - 1); - for (i=0; i kernelspace linker -# - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# # CONFIG_PNP is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y +# CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=y -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set -# CONFIG_IDE_CHIPSETS is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_SCSI_AHA152X is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_IN2000 is not set +# CONFIG_SCSI_DTC3280 is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GENERIC_NCR5380 is not set +# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set +# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_PAS16 is not set +# CONFIG_SCSI_PSI240I is not set +# CONFIG_SCSI_QLOGIC_FAS is not set +# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_T128 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_PATA_LEGACY is not set +# CONFIG_PATA_PCMCIA is not set +# CONFIG_PATA_QDI is not set +# CONFIG_PATA_WINBOND_VLB is not set +CONFIG_PATA_PLATFORM=y # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# ISDN subsystem -# - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -411,19 +363,17 @@ # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_POLLDEV=y # # Userland interfaces # -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_TSDEV=y CONFIG_INPUT_TSDEV_SCREEN_X=240 CONFIG_INPUT_TSDEV_SCREEN_Y=320 -# CONFIG_INPUT_EVDEV is not set +CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # @@ -436,9 +386,12 @@ # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_HP6XX=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set @@ -447,6 +400,7 @@ CONFIG_TOUCHSCREEN_HP600=y # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set # CONFIG_INPUT_MISC is not set # @@ -476,46 +430,29 @@ # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -# CONFIG_SERIAL_SH_SCI is not set +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=3 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# +CONFIG_LEGACY_PTY_COUNT=64 # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # -# Ftape, the floppy tape device driver -# - -# # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -523,48 +460,55 @@ # SPI support # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set # -# Dallas's 1-wire bus -# - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_HP680=y # -# Graphics support +# Display device support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_EPSON1355 is not set + +# +# Frame buffer hardware drivers +# # CONFIG_FB_S1D13XXX is not set CONFIG_FB_HIT=y # CONFIG_FB_VIRTUAL is not set @@ -575,6 +519,7 @@ # # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y # CONFIG_FONT_8x8 is not set @@ -587,79 +532,49 @@ # CONFIG_FONT_MINI_4x6 is not set # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set - -# -# Logo configuration -# # CONFIG_LOGO is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # -CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# -# CONFIG_SND is not set - -# -# Open Sound System -# -CONFIG_SOUND_PRIME=y -# CONFIG_OSS_OBSOLETE_DRIVER is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -CONFIG_SOUND_SH_DAC_AUDIO=y -CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL=1 - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# LED drivers -# - -# -# LED Triggers +# RTC interfaces # +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# InfiniBand support +# SPI RTC drivers # # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# Platform RTC drivers # +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Real Time Clock +# on-CPU RTC drivers # -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_DRV_SH=y # # DMA Engine support @@ -675,16 +590,23 @@ # DMA Devices # # +# Userspace I/O +# +# CONFIG_UIO is not set + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -705,7 +627,7 @@ # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y -# CONFIG_MSDOS_FS is not set +CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" @@ -755,7 +677,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set +CONFIG_NLS_CODEPAGE_850=y # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set @@ -799,34 +721,73 @@ # CONFIG_PROFILING is not set # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_UNWIND_INFO is not set # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_KGDB is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_SH_KGDB is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_HW is not set # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=y +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig new file mode 100644 index 0000000..f8398a5 --- /dev/null +++ b/arch/sh/configs/magicpanelr2_defconfig @@ -0,0 +1,925 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc2 +# Fri Aug 17 12:15:16 2007 +# +CONFIG_SUPERH=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +CONFIG_AUDIT=y +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_SYSFS_DEPRECATED=y +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" + +# +# System type +# +CONFIG_CPU_SH3=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +CONFIG_CPU_SUBTYPE_SH7720=y +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x0C000000 +CONFIG_MEMORY_SIZE=0x03F00000 +CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +# CONFIG_SH_FPU_EMU is not set +CONFIG_SH_DSP=y +CONFIG_SH_ADC=y +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_INTC_IRQ=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_DSP=y + +# +# Board support +# +CONFIG_SH_MAGIC_PANEL_R2=y + +# +# Magic Panel R2 options +# +CONFIG_SH_MAGIC_PANEL_R2_VERSION=3 + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_PCLK_FREQ=24000000 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +CONFIG_SH_DMA_API=y +CONFIG_SH_DMA=y +CONFIG_NR_ONCHIP_DMA_CHANNELS=6 +# CONFIG_NR_DMA_CHANNELS_BOOL is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_CMDLINE_BOOL is not set + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0000000 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_SOLUTIONENGINE is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_STNIC is not set +# CONFIG_SMC91X is not set +CONFIG_SMC911X=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_INPUT_MOUSE=y +# CONFIG_MOUSE_PS2 is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=48 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=2 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SH=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +# CONFIG_JFFS2_FS_WRITEBUFFER is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_BIND34=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_DEBUG_KOBJECT=y +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +# CONFIG_FORCED_INLINING is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SH_STANDARD_BIOS is not set +CONFIG_EARLY_SCIF_CONSOLE=y +CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000 +CONFIG_EARLY_PRINTK=y +# CONFIG_DEBUG_BOOTMEM is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_4KSTACKS is not set +CONFIG_SH_KGDB=y + +# +# KGDB configuration options +# +# CONFIG_MORE_COMPILE_OPTIONS is not set +# CONFIG_KGDB_NMI is not set +CONFIG_KGDB_SYSRQ=y + +# +# Serial port setup +# +CONFIG_KGDB_DEFPORT=0 +CONFIG_KGDB_DEFBAUD=115200 +CONFIG_KGDB_DEFPARITY_N=y +# CONFIG_KGDB_DEFPARITY_E is not set +# CONFIG_KGDB_DEFPARITY_O is not set +CONFIG_KGDB_DEFBITS_8=y +# CONFIG_KGDB_DEFBITS_7 is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig new file mode 100644 index 0000000..2dc754e --- /dev/null +++ b/arch/sh/configs/rts7751r2d1_defconfig @@ -0,0 +1,1167 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc2 +# Tue Aug 14 18:04:44 2007 +# +CONFIG_SUPERH=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System type +# +CONFIG_CPU_SH4=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +CONFIG_CPU_SUBTYPE_SH7751R=y +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +# CONFIG_SH_STORE_QUEUES is not set +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_INTC_IRQ=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y + +# +# Board support +# +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +CONFIG_SH_RTS7751R2D=y +# CONFIG_SH_LANDISK is not set +# CONFIG_SH_TITAN is not set +# CONFIG_SH_LBOX_RE2 is not set + +# +# RTS7751R2D options +# +# CONFIG_RTS7751R2D_PLUS is not set +CONFIG_RTS7751R2D_1=y + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_PCLK_FREQ=60000000 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00010000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_UBC_WAKEUP is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=serial" + +# +# Bus options +# +CONFIG_PCI=y +CONFIG_SH_PCIDMA_NONCOHERENT=y +CONFIG_PCI_AUTO=y +CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set +CONFIG_HOTPLUG_PCI=y +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +CONFIG_PATA_PLATFORM=y +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_STNIC is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=y +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_CONSOLE is not set +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=1 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_SM501=y + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +CONFIG_FB_SM501=y +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +# CONFIG_LOGO_SUPERH_MONO is not set +# CONFIG_LOGO_SUPERH_VGA16 is not set +CONFIG_LOGO_SUPERH_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_MPU401_UART=m +CONFIG_SND_OPL3_LIB=m +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +CONFIG_SND_YMFPCI=m +CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y +# CONFIG_SND_AC97_POWER_SAVE is not set + +# +# SUPERH devices +# + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# SoC Audio support for SuperH +# + +# +# Open Sound System +# +CONFIG_SOUND_PRIME=m +# CONFIG_SOUND_TRIDENT is not set +# CONFIG_SOUND_MSNDCLAS is not set +# CONFIG_SOUND_MSNDPIN is not set +CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SH=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=y +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SH_STANDARD_BIOS is not set +CONFIG_EARLY_SCIF_CONSOLE=y +CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000 +CONFIG_EARLY_PRINTK=y +# CONFIG_SH_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/rts7751r2d_defconfig b/arch/sh/configs/rts7751r2d_defconfig deleted file mode 100644 index b64f73b..0000000 --- a/arch/sh/configs/rts7751r2d_defconfig +++ /dev/null @@ -1,1353 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-rc1 -# Thu Mar 1 16:42:40 2007 -# -CONFIG_SUPERH=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -# CONFIG_GENERIC_TIME is not set -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODULE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System type -# -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -CONFIG_SH_RTS7751R2D=y -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_7206_SOLUTION_ENGINE is not set -# CONFIG_SH_7619_SOLUTION_ENGINE is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# -CONFIG_CPU_SH4=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set -# CONFIG_CPU_SUBTYPE_SH7619 is not set - -# -# SH-2A Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7206 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set -# CONFIG_CPU_SUBTYPE_SH7705 is not set -# CONFIG_CPU_SUBTYPE_SH7706 is not set -# CONFIG_CPU_SUBTYPE_SH7707 is not set -# CONFIG_CPU_SUBTYPE_SH7708 is not set -# CONFIG_CPU_SUBTYPE_SH7709 is not set -# CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7750 is not set -# CONFIG_CPU_SUBTYPE_SH7091 is not set -# CONFIG_CPU_SUBTYPE_SH7750R is not set -# CONFIG_CPU_SUBTYPE_SH7750S is not set -# CONFIG_CPU_SUBTYPE_SH7751 is not set -CONFIG_CPU_SUBTYPE_SH7751R=y -# CONFIG_CPU_SUBTYPE_SH7760 is not set -# CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7770 is not set -# CONFIG_CPU_SUBTYPE_SH7780 is not set -# CONFIG_CPU_SUBTYPE_SH7785 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set -# CONFIG_CPU_SUBTYPE_SH7343 is not set -# CONFIG_CPU_SUBTYPE_SH7722 is not set - -# -# Memory management options -# -CONFIG_MMU=y -CONFIG_PAGE_OFFSET=0x80000000 -CONFIG_MEMORY_START=0x0c000000 -CONFIG_MEMORY_SIZE=0x04000000 -CONFIG_VSYSCALL=y -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=0 - -# -# Cache configuration -# -# CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set - -# -# Processor features -# -CONFIG_CPU_LITTLE_ENDIAN=y -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_SH_FPU=y -# CONFIG_SH_DSP is not set -# CONFIG_SH_STORE_QUEUES is not set -CONFIG_CPU_HAS_INTEVT=y -CONFIG_CPU_HAS_INTC_IRQ=y -CONFIG_CPU_HAS_SR_RB=y -CONFIG_CPU_HAS_PTEA=y - -# -# Timer support -# -CONFIG_SH_TMU=y - -# -# RTS7751R2D options -# -CONFIG_RTS7751R2D_REV11=y -CONFIG_SH_TIMER_IRQ=16 -# CONFIG_NO_IDLE_HZ is not set -CONFIG_SH_PCLK_FREQ=60000000 - -# -# CPU Frequency scaling -# -# CONFIG_CPU_FREQ is not set - -# -# DMA support -# -# CONFIG_SH_DMA is not set -# CONFIG_NR_ONCHIP_DMA_CHANNELS is not set -# CONFIG_NR_DMA_CHANNELS_BOOL is not set - -# -# Companion Chips -# -CONFIG_VOYAGERGX=y -# CONFIG_HD6446X_SERIES is not set -CONFIG_HEARTBEAT=y - -# -# Additional SuperH Device Drivers -# -# CONFIG_PUSH_SWITCH is not set - -# -# Kernel features -# -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -# CONFIG_KEXEC is not set -# CONFIG_SMP is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set - -# -# Boot options -# -CONFIG_ZERO_PAGE_OFFSET=0x00010000 -CONFIG_BOOT_LINK_OFFSET=0x00800000 -# CONFIG_UBC_WAKEUP is not set -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=serial" - -# -# Bus options -# -CONFIG_PCI=y -CONFIG_SH_PCIDMA_NONCOHERENT=y -CONFIG_PCI_AUTO=y -CONFIG_PCI_AUTO_UPDATE_RESOURCES=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -CONFIG_HOTPLUG_PCI=y -# CONFIG_HOTPLUG_PCI_FAKE is not set -# CONFIG_HOTPLUG_PCI_CPCI is not set -# CONFIG_HOTPLUG_PCI_SHPC is not set - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set -CONFIG_WIRELESS_EXT=y - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -CONFIG_ATA=y -# CONFIG_ATA_NONSTANDARD is not set -# CONFIG_SATA_AHCI is not set -# CONFIG_SATA_SVW is not set -# CONFIG_ATA_PIIX is not set -# CONFIG_SATA_MV is not set -# CONFIG_SATA_NV is not set -# CONFIG_PDC_ADMA is not set -# CONFIG_SATA_QSTOR is not set -# CONFIG_SATA_PROMISE is not set -# CONFIG_SATA_SX4 is not set -# CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set -# CONFIG_SATA_SIS is not set -# CONFIG_SATA_ULI is not set -# CONFIG_SATA_VIA is not set -# CONFIG_SATA_VITESSE is not set -# CONFIG_SATA_INIC162X is not set -# CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set -# CONFIG_PATA_ARTOP is not set -# CONFIG_PATA_ATIIXP is not set -# CONFIG_PATA_CMD64X is not set -# CONFIG_PATA_CS5520 is not set -# CONFIG_PATA_CS5530 is not set -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_ATA_GENERIC is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IT821X is not set -# CONFIG_PATA_IT8213 is not set -# CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_MARVELL is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_NETCELL is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_OPTI is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_RADISYS is not set -# CONFIG_PATA_RZ1000 is not set -# CONFIG_PATA_SC1200 is not set -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_SIL680 is not set -# CONFIG_PATA_SIS is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set -CONFIG_PATA_PLATFORM=y - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_STNIC is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_SMC91X is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -CONFIG_8139TOO=y -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -# CONFIG_8139TOO_8129 is not set -# CONFIG_8139_OLD_RX_RESET is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_SC92031 is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -# CONFIG_NET_WIRELESS_RTNETLINK is not set - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_IPW2100 is not set -# CONFIG_IPW2200 is not set -CONFIG_HERMES=m -# CONFIG_PLX_HERMES is not set -# CONFIG_TMD_HERMES is not set -# CONFIG_NORTEL_HERMES is not set -# CONFIG_PCI_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support -# -# CONFIG_PRISM54 is not set -# CONFIG_HOSTAP is not set -CONFIG_NET_WIRELESS=y - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_CONSOLE is not set -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=1 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Multifunction device drivers -# -CONFIG_MFD_SM501=y - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB_DDC is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set - -# -# Frambuffer hardware drivers -# -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_EPSON1355 is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_S3 is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -CONFIG_FB_SM501=y -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -# CONFIG_LOGO_SUPERH_MONO is not set -# CONFIG_LOGO_SUPERH_VGA16 is not set -CONFIG_LOGO_SUPERH_CLUT224=y - -# -# Sound -# -CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_RAWMIDI=m -# CONFIG_SND_SEQUENCER is not set -# CONFIG_SND_MIXER_OSS is not set -# CONFIG_SND_PCM_OSS is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -CONFIG_SND_MPU401_UART=m -CONFIG_SND_OPL3_LIB=m -CONFIG_SND_AC97_CODEC=m -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# PCI devices -# -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS300 is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_DARLA20 is not set -# CONFIG_SND_GINA20 is not set -# CONFIG_SND_LAYLA20 is not set -# CONFIG_SND_DARLA24 is not set -# CONFIG_SND_GINA24 is not set -# CONFIG_SND_LAYLA24 is not set -# CONFIG_SND_MONA is not set -# CONFIG_SND_MIA is not set -# CONFIG_SND_ECHO3G is not set -# CONFIG_SND_INDIGO is not set -# CONFIG_SND_INDIGOIO is not set -# CONFIG_SND_INDIGODJ is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDA_INTEL is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -# CONFIG_SND_INTEL8X0 is not set -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_RIPTIDE is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VX222 is not set -CONFIG_SND_YMFPCI=m -# CONFIG_SND_AC97_POWER_SAVE is not set - -# -# SoC audio support -# -# CONFIG_SND_SOC is not set - -# -# Open Sound System -# -CONFIG_SOUND_PRIME=m -# CONFIG_OBSOLETE_OSS is not set -# CONFIG_SOUND_BT878 is not set -# CONFIG_SOUND_ICH is not set -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_VIA82CXXX is not set -CONFIG_AC97_BUS=m - -# -# HID Devices -# -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set - -# -# RTC drivers -# -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_M48T86 is not set -CONFIG_RTC_DRV_SH=y -# CONFIG_RTC_DRV_TEST is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -CONFIG_MINIX_FS=y -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLBFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -CONFIG_NLS_CODEPAGE_932=y -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# -# CONFIG_DLM is not set - -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=y - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_SH_STANDARD_BIOS is not set -CONFIG_EARLY_SCIF_CONSOLE=y -CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000 -CONFIG_EARLY_PRINTK=y -# CONFIG_SH_KGDB is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig new file mode 100644 index 0000000..4ff5a75 --- /dev/null +++ b/arch/sh/configs/rts7751r2dplus_defconfig @@ -0,0 +1,1167 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc2 +# Tue Aug 14 16:33:08 2007 +# +CONFIG_SUPERH=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System type +# +CONFIG_CPU_SH4=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +CONFIG_CPU_SUBTYPE_SH7751R=y +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +# CONFIG_SH_STORE_QUEUES is not set +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_INTC_IRQ=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y + +# +# Board support +# +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +CONFIG_SH_RTS7751R2D=y +# CONFIG_SH_LANDISK is not set +# CONFIG_SH_TITAN is not set +# CONFIG_SH_LBOX_RE2 is not set + +# +# RTS7751R2D options +# +CONFIG_RTS7751R2D_PLUS=y +# CONFIG_RTS7751R2D_1 is not set + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_PCLK_FREQ=60000000 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00010000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_UBC_WAKEUP is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=serial" + +# +# Bus options +# +CONFIG_PCI=y +CONFIG_SH_PCIDMA_NONCOHERENT=y +CONFIG_PCI_AUTO=y +CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set +CONFIG_HOTPLUG_PCI=y +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +CONFIG_PATA_PLATFORM=y +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_STNIC is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=y +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_CONSOLE is not set +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=1 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_SM501=y + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +CONFIG_FB_SM501=y +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +# CONFIG_LOGO_SUPERH_MONO is not set +# CONFIG_LOGO_SUPERH_VGA16 is not set +CONFIG_LOGO_SUPERH_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_MPU401_UART=m +CONFIG_SND_OPL3_LIB=m +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +CONFIG_SND_YMFPCI=m +CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y +# CONFIG_SND_AC97_POWER_SAVE is not set + +# +# SUPERH devices +# + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# SoC Audio support for SuperH +# + +# +# Open Sound System +# +CONFIG_SOUND_PRIME=m +# CONFIG_SOUND_TRIDENT is not set +# CONFIG_SOUND_MSNDCLAS is not set +# CONFIG_SOUND_MSNDPIN is not set +CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SH=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=y +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SH_STANDARD_BIOS is not set +CONFIG_EARLY_SCIF_CONSOLE=y +CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000 +CONFIG_EARLY_PRINTK=y +# CONFIG_SH_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig index f2f2a3c..0d0cda9 100644 --- a/arch/sh/configs/se7206_defconfig +++ b/arch/sh/configs/se7206_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc4 -# Fri Jun 15 19:37:46 2007 +# Linux kernel version: 2.6.23-rc4 +# Thu Sep 13 16:40:16 2007 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -17,25 +17,22 @@ CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SYSVIPC is not set # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 @@ -60,23 +57,17 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y # CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=1 - -# -# Loadable module support -# # CONFIG_MODULES is not set - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -98,7 +89,6 @@ CONFIG_CPU_SH2=y CONFIG_CPU_SH2A=y # CONFIG_CPU_SUBTYPE_SH7619 is not set CONFIG_CPU_SUBTYPE_SH7206=y -# CONFIG_CPU_SUBTYPE_SH7300 is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -106,6 +96,7 @@ # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -119,7 +110,7 @@ # CONFIG_CPU_SUBTYPE_ST40GX1 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set @@ -136,15 +127,16 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_MAX_ACTIVE_REGIONS=1 CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y +# CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set @@ -155,7 +147,9 @@ # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features @@ -163,8 +157,6 @@ # # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_CPU_BIG_ENDIAN=y # CONFIG_SH_FPU_EMU is not set -# CONFIG_SH_DSP is not set -CONFIG_CPU_HAS_IPR_IRQ=y # # Board support @@ -185,12 +177,23 @@ # CONFIG_TICK_ONESHOT is not set # # CPU Frequency scaling # -# CONFIG_CPU_FREQ is not set +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +# CONFIG_SH_CPU_FREQ is not set # # DMA support # -# CONFIG_SH_DMA is not set # # Companion Chips @@ -199,17 +202,17 @@ # # # Additional SuperH Device Drivers # -# CONFIG_HEARTBEAT is not set +CONFIG_HEARTBEAT=y # CONFIG_PUSH_SWITCH is not set # # Kernel features # -CONFIG_HZ_100=y +# CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=100 +CONFIG_HZ_1000=y +CONFIG_HZ=1000 # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y @@ -221,11 +224,13 @@ # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 -# CONFIG_CMDLINE_BOOL is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC3,115200 earlyprintk=serial ignore_loglevel" # # Bus options # +# CONFIG_CF_ENABLER is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # @@ -315,6 +320,7 @@ # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -325,11 +331,9 @@ # Generic Driver Options # # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set @@ -411,31 +415,16 @@ # # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_BLINK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set # CONFIG_IDE is not set # @@ -443,27 +432,18 @@ # SCSI device support # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_STNIC is not set @@ -483,15 +463,7 @@ # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -499,6 +471,7 @@ # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -546,19 +519,11 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_UNIX98_PTYS is not set # CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set @@ -567,11 +532,8 @@ # SPI support # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # @@ -596,25 +558,21 @@ # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_FB is not set # # Sound # # CONFIG_SOUND is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -625,31 +583,7 @@ # USB Gadget Support # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# # CONFIG_RTC_CLASS is not set # @@ -666,6 +600,11 @@ # DMA Devices # # +# Userspace I/O +# +# CONFIG_UIO is not set + +# # File systems # # CONFIG_EXT2_FS is not set @@ -736,7 +675,6 @@ # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -752,12 +690,12 @@ # CONFIG_NLS is not set # # Distributed Lock Manager # -# CONFIG_DLM is not set # # Profiling support # -# CONFIG_PROFILING is not set +CONFIG_PROFILING=y +# CONFIG_OPROFILE is not set # # Kernel hacking @@ -768,19 +706,41 @@ # CONFIG_ENABLE_MUST_CHECK is not set # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +CONFIG_SLUB_DEBUG_ON=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_FAULT_INJECTION is not set # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set +CONFIG_EARLY_SCIF_CONSOLE=y +CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe9800 +CONFIG_EARLY_PRINTK=y +# CONFIG_DEBUG_BOOTMEM is not set +CONFIG_DEBUG_STACKOVERFLOW=y +CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_4KSTACKS is not set # # Security options # # CONFIG_KEYS is not set - -# -# Cryptographic options -# # CONFIG_CRYPTO is not set # @@ -791,6 +751,7 @@ # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_HAS_IOMEM=y diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig index 219bad5..a794c08 100644 --- a/arch/sh/configs/shx3_defconfig +++ b/arch/sh/configs/shx3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc4 -# Wed Jun 20 14:09:27 2007 +# Linux kernel version: 2.6.23-rc7 +# Fri Sep 21 19:07:30 2007 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -13,32 +13,33 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_SMP=y +CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_UTS_NS is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -63,34 +64,26 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y +# CONFIG_SLAB is not set # CONFIG_SLUB is not set -# CONFIG_SLOB is not set +CONFIG_SLOB=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -113,7 +106,6 @@ CONFIG_CPU_SH4A=y CONFIG_CPU_SHX3=y # CONFIG_CPU_SUBTYPE_SH7619 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set -# CONFIG_CPU_SUBTYPE_SH7300 is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -121,6 +113,7 @@ # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -135,7 +128,6 @@ # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set CONFIG_CPU_SUBTYPE_SHX3=y -# CONFIG_CPU_SUBTYPE_SH73180 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set @@ -148,12 +140,15 @@ CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_VSYSCALL=y +# CONFIG_NUMA is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y -CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_MAX_ACTIVE_REGIONS=6 CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_MEMORY_PROBE=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_64KB is not set @@ -163,12 +158,14 @@ # CONFIG_HUGETLB_PAGE_SIZE_1MB is not se # CONFIG_HUGETLB_PAGE_SIZE_4MB is not set # CONFIG_HUGETLB_PAGE_SIZE_64MB is not set CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y +# CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y +CONFIG_MEMORY_HOTPLUG=y +CONFIG_MEMORY_HOTPLUG_SPARSE=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -178,24 +175,25 @@ # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_CACHE_WRITEBACK is not set +# CONFIG_CACHE_WRITETHROUGH is not set +CONFIG_CACHE_OFF=y # # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y # CONFIG_CPU_BIG_ENDIAN is not set -# CONFIG_SH_FPU is not set -# CONFIG_SH_FPU_EMU is not set -CONFIG_SH_DSP=y +CONFIG_SH_FPU=y CONFIG_SH_STORE_QUEUES=y CONFIG_CPU_HAS_INTEVT=y -CONFIG_CPU_HAS_INTC2_IRQ=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_FPU=y # # Board support # +CONFIG_SH_X3PROTO=y # # Timer and clock configuration @@ -204,13 +202,25 @@ CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=50000000 CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y +# CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y # # CPU Frequency scaling # -# CONFIG_CPU_FREQ is not set +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=m +CONFIG_CPU_FREQ_GOV_USERSPACE=m +CONFIG_CPU_FREQ_GOV_ONDEMAND=m +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m +CONFIG_SH_CPU_FREQ=y # # DMA support @@ -237,6 +247,7 @@ # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set +# CONFIG_SMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y @@ -249,7 +260,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 # CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttySC0,115200 ip=192.168.1.2:::255.255.255.0 root=/dev/nfs nfsroot=192.168.1.1:/exports/devel/rfs/mobiler noaliencache earlyprintk=bios ignore_loglevel" +CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=bios ignore_loglevel" # # Bus options @@ -265,12 +276,106 @@ # # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set +CONFIG_BINFMT_MISC=y # # Networking # -# CONFIG_NET is not set +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +# CONFIG_UNIX is not set +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -285,37 +390,21 @@ # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# +# CONFIG_CONNECTOR is not set # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set - -# -# Misc devices -# -# CONFIG_BLINK is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set # CONFIG_IDE is not set # @@ -323,6 +412,7 @@ # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -351,73 +441,54 @@ # SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_PATA_PLATFORM=y - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# ISDN subsystem -# - -# -# Telephony Support -# +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_STNIC is not set +CONFIG_SMC91X=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +# CONFIG_INPUT is not set # # Hardware I/O ports # -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # @@ -442,19 +513,18 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set # -# IPMI +# Watchdog Device Drivers # -# CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set -CONFIG_HW_RANDOM=y +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_SH_WDT is not set +# CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set @@ -463,11 +533,8 @@ # SPI support # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # @@ -479,6 +546,7 @@ # # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set # CONFIG_DAB is not set # @@ -491,24 +559,18 @@ # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_FB is not set # # Sound # # CONFIG_SOUND is not set - -# -# HID Devices -# -# CONFIG_HID is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -517,68 +579,32 @@ # # # USB Gadget Support # -# CONFIG_USB_GADGET is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +CONFIG_USB_GADGET_M66592=y +CONFIG_USB_M66592=y +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_SH=y +# CONFIG_RTC_CLASS is not set # # DMA Engine support @@ -594,6 +620,11 @@ # DMA Devices # # +# Userspace I/O +# +CONFIG_UIO=m + +# # File systems # CONFIG_EXT2_FS=y @@ -612,6 +643,7 @@ # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -667,6 +699,17 @@ # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# # Partition Types # # CONFIG_PARTITION_ADVANCED is not set @@ -678,6 +721,11 @@ # # CONFIG_NLS is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # CONFIG_PROFILING=y @@ -687,31 +735,28 @@ # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_PRINTK_TIME=y +# CONFIG_PRINTK_TIME is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set -CONFIG_DEBUG_SLAB=y -CONFIG_DEBUG_SLAB_LEAK=y CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_LOCK_ALLOC=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set -CONFIG_LOCKDEP=y -CONFIG_DEBUG_LOCKDEP=y +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set @@ -735,10 +780,6 @@ # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# # CONFIG_CRYPTO is not set # @@ -749,6 +790,7 @@ # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y CONFIG_HAS_IOMEM=y diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig index ee71143..4e711a0 100644 --- a/arch/sh/drivers/dma/Kconfig +++ b/arch/sh/drivers/dma/Kconfig @@ -12,6 +12,7 @@ config SH_DMA config NR_ONCHIP_DMA_CHANNELS int depends on SH_DMA + default "6" if CPU_SUBTYPE_SH7720 default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R default "12" if CPU_SUBTYPE_SH7780 default "4" diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index 06ed060..958bac1 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -24,13 +24,19 @@ static int dmte_irq_map[] = { DMTE1_IRQ, DMTE2_IRQ, DMTE3_IRQ, -#if defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ +#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ defined(CONFIG_CPU_SUBTYPE_SH7760) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) DMTE4_IRQ, DMTE5_IRQ, +#endif +#if defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7760) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) DMTE6_IRQ, - DMTE7_IRQ, + DMTE7_IRQ, #endif }; @@ -196,7 +202,8 @@ static int sh_dmac_get_dma_residue(struc return ctrl_inl(DMATCR[chan->chan]) << calc_xmit_shift(chan); } -#ifdef CONFIG_CPU_SUBTYPE_SH7780 +#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) #define dmaor_read_reg() ctrl_inw(DMAOR) #define dmaor_write_reg(data) ctrl_outw(data, DMAOR) #else diff --git a/arch/sh/drivers/heartbeat.c b/arch/sh/drivers/heartbeat.c index 10c1828..b76a14f 100644 --- a/arch/sh/drivers/heartbeat.c +++ b/arch/sh/drivers/heartbeat.c @@ -24,24 +24,44 @@ #include #include #include #include +#include #define DRV_NAME "heartbeat" -#define DRV_VERSION "0.1.0" +#define DRV_VERSION "0.1.1" -struct heartbeat_data { - void __iomem *base; - unsigned char bit_pos[8]; - struct timer_list timer; -}; +static unsigned char default_bit_pos[] = { 0, 1, 2, 3, 4, 5, 6, 7 }; + +static inline void heartbeat_toggle_bit(struct heartbeat_data *hd, + unsigned bit, unsigned int inverted) +{ + unsigned int new; + + new = (1 << hd->bit_pos[bit]); + if (inverted) + new = ~new; + + switch (hd->regsize) { + case 32: + iowrite32(new, hd->base); + break; + case 16: + iowrite16(new, hd->base); + break; + default: + iowrite8(new, hd->base); + break; + } +} static void heartbeat_timer(unsigned long data) { struct heartbeat_data *hd = (struct heartbeat_data *)data; static unsigned bit = 0, up = 1; - ctrl_outw(1 << hd->bit_pos[bit], (unsigned long)hd->base); + heartbeat_toggle_bit(hd, bit, hd->flags & HEARTBEAT_INVERTED); + bit += up; - if ((bit == 0) || (bit == ARRAY_SIZE(hd->bit_pos)-1)) + if ((bit == 0) || (bit == (hd->nr_bits)-1)) up = -up; mod_timer(&hd->timer, jiffies + (110 - ((300 << FSHIFT) / @@ -64,21 +84,31 @@ static int heartbeat_drv_probe(struct pl return -EINVAL; } - hd = kmalloc(sizeof(struct heartbeat_data), GFP_KERNEL); - if (unlikely(!hd)) - return -ENOMEM; - if (pdev->dev.platform_data) { - memcpy(hd->bit_pos, pdev->dev.platform_data, - ARRAY_SIZE(hd->bit_pos)); + hd = pdev->dev.platform_data; } else { - int i; + hd = kzalloc(sizeof(struct heartbeat_data), GFP_KERNEL); + if (unlikely(!hd)) + return -ENOMEM; + } + + hd->base = ioremap_nocache(res->start, res->end - res->start + 1); + if (!unlikely(hd->base)) { + dev_err(&pdev->dev, "ioremap failed\n"); + + if (!pdev->dev.platform_data) + kfree(hd); + + return -ENXIO; + } - for (i = 0; i < ARRAY_SIZE(hd->bit_pos); i++) - hd->bit_pos[i] = i; + if (!hd->nr_bits) { + hd->bit_pos = default_bit_pos; + hd->nr_bits = ARRAY_SIZE(default_bit_pos); } - hd->base = (void __iomem *)(unsigned long)res->start; + if (!hd->regsize) + hd->regsize = 8; /* default access size */ setup_timer(&hd->timer, heartbeat_timer, (unsigned long)hd); platform_set_drvdata(pdev, hd); @@ -91,10 +121,12 @@ static int heartbeat_drv_remove(struct p struct heartbeat_data *hd = platform_get_drvdata(pdev); del_timer_sync(&hd->timer); + iounmap(hd->base); platform_set_drvdata(pdev, NULL); - kfree(hd); + if (!pdev->dev.platform_data) + kfree(hd); return 0; } diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c index 4a518d9..ec8430c 100644 --- a/arch/sh/drivers/pci/ops-rts7751r2d.c +++ b/arch/sh/drivers/pci/ops-rts7751r2d.c @@ -19,10 +19,10 @@ #include #include "pci-sh4.h" static u8 rts7751r2d_irq_tab[] __initdata = { - IRQ_PCISLOT1, - IRQ_PCISLOT2, - IRQ_PCMCIA, - IRQ_PCIETH, + IRQ_PCI_INTA, + IRQ_PCI_INTB, + IRQ_PCI_INTC, + IRQ_PCI_INTD, }; int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 5508e45..e516087 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -79,19 +79,6 @@ static int __init sh7780_pci_init(void) ctrl_outl(0xAAAA0000, INTC_ICR1); /* INTPRI: priority=3(all) */ ctrl_outl(0x33333333, INTC_INTPRI); - } else { - /* INTC SH-4 Mode */ - ctrl_outl(0x00200000, INTC_ICR0); - /* enable PCIINTA - PCIINTD */ - ctrl_outl(0x00078000, INTC_INT2MSKCR); - /* disable IRL4-7 Interrupt */ - ctrl_outl(0x40000000, INTC_INTMSK1); - /* disable IRL4-7 Interrupt */ - ctrl_outl(0x0000fffe, INTC_INTMSK2); - /* enable IRL0-3 Interrupt */ - ctrl_outl(0x80000000, INTC_INTMSKCLR1); - /* enable IRL0-3 Interrupt */ - ctrl_outl(0xfffe0000, INTC_INTMSKCLR2); } if ((ret = sh4_pci_check_direct()) != 0) diff --git a/arch/sh/drivers/push-switch.c b/arch/sh/drivers/push-switch.c index 725be6d..b3d20c0 100644 --- a/arch/sh/drivers/push-switch.c +++ b/arch/sh/drivers/push-switch.c @@ -138,4 +138,4 @@ module_exit(switch_exit); MODULE_VERSION(DRV_VERSION); MODULE_AUTHOR("Paul Mundt"); -MODULE_LICENSE("GPL v2"); +MODULE_LICENSE("GPLv2"); diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c index 9172e97..c217c4b 100644 --- a/arch/sh/kernel/cpu/init.c +++ b/arch/sh/kernel/cpu/init.c @@ -22,6 +22,7 @@ #include #include #include #include +#include /* * Generic wrapper for command line arguments to disable on-chip @@ -143,12 +144,15 @@ #ifdef CCR_CACHE_EMODE flags &= ~CCR_CACHE_EMODE; #endif -#ifdef CONFIG_SH_WRITETHROUGH - /* Turn on Write-through caching */ +#if defined(CONFIG_CACHE_WRITETHROUGH) + /* Write-through */ flags |= CCR_CACHE_WT; -#else - /* .. or default to Write-back */ +#elif defined(CONFIG_CACHE_WRITEBACK) + /* Write-back */ flags |= CCR_CACHE_CB; +#else + /* Off */ + flags &= ~CCR_CACHE_ENABLE; #endif ctrl_outl(flags, CCR); @@ -213,8 +217,11 @@ #endif /* CONFIG_SH_DSP */ * Each processor family is still responsible for doing its own probing * and cache configuration in detect_cpu_and_cache_system(). */ -asmlinkage void __init sh_cpu_init(void) + +asmlinkage void __cpuinit sh_cpu_init(void) { + current_thread_info()->cpu = hard_smp_processor_id(); + /* First, probe the CPU */ detect_cpu_and_cache_system(); @@ -224,9 +231,10 @@ asmlinkage void __init sh_cpu_init(void) /* Init the cache */ cache_init(); - shm_align_mask = max_t(unsigned long, - current_cpu_data.dcache.way_size - 1, - PAGE_SIZE - 1); + if (raw_smp_processor_id() == 0) + shm_align_mask = max_t(unsigned long, + current_cpu_data.dcache.way_size - 1, + PAGE_SIZE - 1); /* Disable the FPU */ if (fpu_disabled) { @@ -265,6 +273,7 @@ #endif * like PTRACE_SINGLESTEP or doing hardware watchpoints in GDB. So .. * we wake it up and hope that all is well. */ - ubc_wakeup(); + if (raw_smp_processor_id() == 0) + ubc_wakeup(); speculative_execution_init(); } diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile index 60bfc05..8da8e17 100644 --- a/arch/sh/kernel/cpu/irq/Makefile +++ b/arch/sh/kernel/cpu/irq/Makefile @@ -1,9 +1,7 @@ # # Makefile for the Linux/SuperH CPU-specifc IRQ handlers. # -obj-y += imask.o +obj-y += imask.o intc.o obj-$(CONFIG_CPU_HAS_IPR_IRQ) += ipr.o obj-$(CONFIG_CPU_HAS_MASKREG_IRQ) += maskreg.o -obj-$(CONFIG_CPU_HAS_INTC_IRQ) += intc.o -obj-$(CONFIG_CPU_HAS_INTC2_IRQ) += intc2.o diff --git a/arch/sh/kernel/cpu/irq/intc.c b/arch/sh/kernel/cpu/irq/intc.c index 9345a71..6ac018c 100644 --- a/arch/sh/kernel/cpu/irq/intc.c +++ b/arch/sh/kernel/cpu/irq/intc.c @@ -20,145 +20,258 @@ #include #include #include #include +#include + +#define _INTC_MK(fn, mode, addr_e, addr_d, width, shift) \ + ((shift) | ((width) << 5) | ((fn) << 9) | ((mode) << 13) | \ + ((addr_e) << 16) | ((addr_d << 24))) + +#define _INTC_SHIFT(h) (h & 0x1f) +#define _INTC_WIDTH(h) ((h >> 5) & 0xf) +#define _INTC_FN(h) ((h >> 9) & 0xf) +#define _INTC_MODE(h) ((h >> 13) & 0x7) +#define _INTC_ADDR_E(h) ((h >> 16) & 0xff) +#define _INTC_ADDR_D(h) ((h >> 24) & 0xff) + +struct intc_handle_int { + unsigned int irq; + unsigned long handle; +}; + +struct intc_desc_int { + unsigned long *reg; +#ifdef CONFIG_SMP + unsigned long *smp; +#endif + unsigned int nr_reg; + struct intc_handle_int *prio; + unsigned int nr_prio; + struct intc_handle_int *sense; + unsigned int nr_sense; + struct irq_chip chip; +}; -#define _INTC_MK(fn, idx, bit, value) \ - ((fn) << 24 | ((value) << 16) | ((idx) << 8) | (bit)) -#define _INTC_FN(h) (h >> 24) -#define _INTC_VALUE(h) ((h >> 16) & 0xff) -#define _INTC_IDX(h) ((h >> 8) & 0xff) -#define _INTC_BIT(h) (h & 0xff) +#ifdef CONFIG_SMP +#define IS_SMP(x) x.smp +#define INTC_REG(d, x, c) (d->reg[(x)] + ((d->smp[(x)] & 0xff) * c)) +#define SMP_NR(d, x) ((d->smp[(x)] >> 8) ? (d->smp[(x)] >> 8) : 1) +#else +#define IS_SMP(x) 0 +#define INTC_REG(d, x, c) (d->reg[(x)]) +#define SMP_NR(d, x) 1 +#endif -#define _INTC_PTR(desc, member, data) \ - (desc->member + _INTC_IDX(data)) +static unsigned int intc_prio_level[NR_IRQS]; /* for now */ -static inline struct intc_desc *get_intc_desc(unsigned int irq) +static inline struct intc_desc_int *get_intc_desc(unsigned int irq) { struct irq_chip *chip = get_irq_chip(irq); - return (void *)((char *)chip - offsetof(struct intc_desc, chip)); + return (void *)((char *)chip - offsetof(struct intc_desc_int, chip)); } static inline unsigned int set_field(unsigned int value, unsigned int field_value, - unsigned int width, - unsigned int shift) + unsigned int handle) { + unsigned int width = _INTC_WIDTH(handle); + unsigned int shift = _INTC_SHIFT(handle); + value &= ~(((1 << width) - 1) << shift); value |= field_value << shift; return value; } -static inline unsigned int set_prio_field(struct intc_desc *desc, - unsigned int value, - unsigned int priority, - unsigned int data) +static void write_8(unsigned long addr, unsigned long h, unsigned long data) { - unsigned int width = _INTC_PTR(desc, prio_regs, data)->field_width; - - return set_field(value, priority, width, _INTC_BIT(data)); + ctrl_outb(set_field(0, data, h), addr); } -static void disable_prio_16(struct intc_desc *desc, unsigned int data) +static void write_16(unsigned long addr, unsigned long h, unsigned long data) { - unsigned long addr = _INTC_PTR(desc, prio_regs, data)->reg; - - ctrl_outw(set_prio_field(desc, ctrl_inw(addr), 0, data), addr); + ctrl_outw(set_field(0, data, h), addr); } -static void enable_prio_16(struct intc_desc *desc, unsigned int data) +static void write_32(unsigned long addr, unsigned long h, unsigned long data) { - unsigned long addr = _INTC_PTR(desc, prio_regs, data)->reg; - unsigned int prio = _INTC_VALUE(data); - - ctrl_outw(set_prio_field(desc, ctrl_inw(addr), prio, data), addr); + ctrl_outl(set_field(0, data, h), addr); } -static void disable_prio_32(struct intc_desc *desc, unsigned int data) +static void modify_8(unsigned long addr, unsigned long h, unsigned long data) { - unsigned long addr = _INTC_PTR(desc, prio_regs, data)->reg; - - ctrl_outl(set_prio_field(desc, ctrl_inl(addr), 0, data), addr); + ctrl_outb(set_field(ctrl_inb(addr), data, h), addr); } -static void enable_prio_32(struct intc_desc *desc, unsigned int data) +static void modify_16(unsigned long addr, unsigned long h, unsigned long data) { - unsigned long addr = _INTC_PTR(desc, prio_regs, data)->reg; - unsigned int prio = _INTC_VALUE(data); - - ctrl_outl(set_prio_field(desc, ctrl_inl(addr), prio, data), addr); + ctrl_outw(set_field(ctrl_inw(addr), data, h), addr); } -static void disable_mask_8(struct intc_desc *desc, unsigned int data) +static void modify_32(unsigned long addr, unsigned long h, unsigned long data) { - ctrl_outb(1 << _INTC_BIT(data), - _INTC_PTR(desc, mask_regs, data)->set_reg); + ctrl_outl(set_field(ctrl_inl(addr), data, h), addr); } -static void enable_mask_8(struct intc_desc *desc, unsigned int data) +enum { REG_FN_ERR = 0, REG_FN_WRITE_BASE = 1, REG_FN_MODIFY_BASE = 5 }; + +static void (*intc_reg_fns[])(unsigned long addr, + unsigned long h, + unsigned long data) = { + [REG_FN_WRITE_BASE + 0] = write_8, + [REG_FN_WRITE_BASE + 1] = write_16, + [REG_FN_WRITE_BASE + 3] = write_32, + [REG_FN_MODIFY_BASE + 0] = modify_8, + [REG_FN_MODIFY_BASE + 1] = modify_16, + [REG_FN_MODIFY_BASE + 3] = modify_32, +}; + +enum { MODE_ENABLE_REG = 0, /* Bit(s) set -> interrupt enabled */ + MODE_MASK_REG, /* Bit(s) set -> interrupt disabled */ + MODE_DUAL_REG, /* Two registers, set bit to enable / disable */ + MODE_PRIO_REG, /* Priority value written to enable interrupt */ + MODE_PCLR_REG, /* Above plus all bits set to disable interrupt */ +}; + +static void intc_mode_field(unsigned long addr, + unsigned long handle, + void (*fn)(unsigned long, + unsigned long, + unsigned long), + unsigned int irq) { - ctrl_outb(1 << _INTC_BIT(data), - _INTC_PTR(desc, mask_regs, data)->clr_reg); + fn(addr, handle, ((1 << _INTC_WIDTH(handle)) - 1)); } -static void disable_mask_32(struct intc_desc *desc, unsigned int data) +static void intc_mode_zero(unsigned long addr, + unsigned long handle, + void (*fn)(unsigned long, + unsigned long, + unsigned long), + unsigned int irq) { - ctrl_outl(1 << _INTC_BIT(data), - _INTC_PTR(desc, mask_regs, data)->set_reg); + fn(addr, handle, 0); } -static void enable_mask_32(struct intc_desc *desc, unsigned int data) +static void intc_mode_prio(unsigned long addr, + unsigned long handle, + void (*fn)(unsigned long, + unsigned long, + unsigned long), + unsigned int irq) { - ctrl_outl(1 << _INTC_BIT(data), - _INTC_PTR(desc, mask_regs, data)->clr_reg); + fn(addr, handle, intc_prio_level[irq]); } -enum { REG_FN_ERROR=0, - REG_FN_MASK_8, REG_FN_MASK_32, - REG_FN_PRIO_16, REG_FN_PRIO_32 }; - -static struct { - void (*enable)(struct intc_desc *, unsigned int); - void (*disable)(struct intc_desc *, unsigned int); -} intc_reg_fns[] = { - [REG_FN_MASK_8] = { enable_mask_8, disable_mask_8 }, - [REG_FN_MASK_32] = { enable_mask_32, disable_mask_32 }, - [REG_FN_PRIO_16] = { enable_prio_16, disable_prio_16 }, - [REG_FN_PRIO_32] = { enable_prio_32, disable_prio_32 }, +static void (*intc_enable_fns[])(unsigned long addr, + unsigned long handle, + void (*fn)(unsigned long, + unsigned long, + unsigned long), + unsigned int irq) = { + [MODE_ENABLE_REG] = intc_mode_field, + [MODE_MASK_REG] = intc_mode_zero, + [MODE_DUAL_REG] = intc_mode_field, + [MODE_PRIO_REG] = intc_mode_prio, + [MODE_PCLR_REG] = intc_mode_prio, }; -static void intc_enable(unsigned int irq) +static void (*intc_disable_fns[])(unsigned long addr, + unsigned long handle, + void (*fn)(unsigned long, + unsigned long, + unsigned long), + unsigned int irq) = { + [MODE_ENABLE_REG] = intc_mode_zero, + [MODE_MASK_REG] = intc_mode_field, + [MODE_DUAL_REG] = intc_mode_field, + [MODE_PRIO_REG] = intc_mode_zero, + [MODE_PCLR_REG] = intc_mode_field, +}; + +static inline void _intc_enable(unsigned int irq, unsigned long handle) { - struct intc_desc *desc = get_intc_desc(irq); - unsigned int data = (unsigned int) get_irq_chip_data(irq); + struct intc_desc_int *d = get_intc_desc(irq); + unsigned long addr; + unsigned int cpu; + + for (cpu = 0; cpu < SMP_NR(d, _INTC_ADDR_E(handle)); cpu++) { + addr = INTC_REG(d, _INTC_ADDR_E(handle), cpu); + intc_enable_fns[_INTC_MODE(handle)](addr, handle, intc_reg_fns\ + [_INTC_FN(handle)], irq); + } +} - intc_reg_fns[_INTC_FN(data)].enable(desc, data); +static void intc_enable(unsigned int irq) +{ + _intc_enable(irq, (unsigned long)get_irq_chip_data(irq)); } static void intc_disable(unsigned int irq) { - struct intc_desc *desc = get_intc_desc(irq); - unsigned int data = (unsigned int) get_irq_chip_data(irq); - - intc_reg_fns[_INTC_FN(data)].disable(desc, data); + struct intc_desc_int *d = get_intc_desc(irq); + unsigned long handle = (unsigned long) get_irq_chip_data(irq); + unsigned long addr; + unsigned int cpu; + + for (cpu = 0; cpu < SMP_NR(d, _INTC_ADDR_D(handle)); cpu++) { + addr = INTC_REG(d, _INTC_ADDR_D(handle), cpu); + intc_disable_fns[_INTC_MODE(handle)](addr, handle,intc_reg_fns\ + [_INTC_FN(handle)], irq); + } } -static void set_sense_16(struct intc_desc *desc, unsigned int data) +static struct intc_handle_int *intc_find_irq(struct intc_handle_int *hp, + unsigned int nr_hp, + unsigned int irq) { - unsigned long addr = _INTC_PTR(desc, sense_regs, data)->reg; - unsigned int width = _INTC_PTR(desc, sense_regs, data)->field_width; - unsigned int bit = _INTC_BIT(data); - unsigned int value = _INTC_VALUE(data); + int i; + + /* this doesn't scale well, but... + * + * this function should only be used for cerain uncommon + * operations such as intc_set_priority() and intc_set_sense() + * and in those rare cases performance doesn't matter that much. + * keeping the memory footprint low is more important. + * + * one rather simple way to speed this up and still keep the + * memory footprint down is to make sure the array is sorted + * and then perform a bisect to lookup the irq. + */ - ctrl_outw(set_field(ctrl_inw(addr), value, width, bit), addr); + for (i = 0; i < nr_hp; i++) { + if ((hp + i)->irq != irq) + continue; + + return hp + i; + } + + return NULL; } -static void set_sense_32(struct intc_desc *desc, unsigned int data) +int intc_set_priority(unsigned int irq, unsigned int prio) { - unsigned long addr = _INTC_PTR(desc, sense_regs, data)->reg; - unsigned int width = _INTC_PTR(desc, sense_regs, data)->field_width; - unsigned int bit = _INTC_BIT(data); - unsigned int value = _INTC_VALUE(data); + struct intc_desc_int *d = get_intc_desc(irq); + struct intc_handle_int *ihp; + + if (!intc_prio_level[irq] || prio <= 1) + return -EINVAL; + + ihp = intc_find_irq(d->prio, d->nr_prio, irq); + if (ihp) { + if (prio >= (1 << _INTC_WIDTH(ihp->handle))) + return -EINVAL; - ctrl_outl(set_field(ctrl_inl(addr), value, width, bit), addr); + intc_prio_level[irq] = prio; + + /* + * only set secondary masking method directly + * primary masking method is using intc_prio_level[irq] + * priority level will be set during next enable() + */ + + if (_INTC_FN(ihp->handle) != REG_FN_ERR) + _intc_enable(irq, ihp->handle); + } + return 0; } #define VALID(x) (x | 0x80) @@ -172,79 +285,38 @@ static unsigned char intc_irq_sense_tabl static int intc_set_sense(unsigned int irq, unsigned int type) { - struct intc_desc *desc = get_intc_desc(irq); + struct intc_desc_int *d = get_intc_desc(irq); unsigned char value = intc_irq_sense_table[type & IRQ_TYPE_SENSE_MASK]; - unsigned int i, j, data, bit; - intc_enum enum_id = 0; - - for (i = 0; i < desc->nr_vectors; i++) { - struct intc_vect *vect = desc->vectors + i; - - if (evt2irq(vect->vect) != irq) - continue; + struct intc_handle_int *ihp; + unsigned long addr; - enum_id = vect->enum_id; - break; - } - - if (!enum_id || !value) + if (!value) return -EINVAL; - value ^= VALID(0); - - for (i = 0; i < desc->nr_sense_regs; i++) { - struct intc_sense_reg *sr = desc->sense_regs + i; - - for (j = 0; j < ARRAY_SIZE(sr->enum_ids); j++) { - if (sr->enum_ids[j] != enum_id) - continue; - - bit = sr->reg_width - ((j + 1) * sr->field_width); - data = _INTC_MK(0, i, bit, value); - - switch(sr->reg_width) { - case 16: - set_sense_16(desc, data); - break; - case 32: - set_sense_32(desc, data); - break; - } - - return 0; - } + ihp = intc_find_irq(d->sense, d->nr_sense, irq); + if (ihp) { + addr = INTC_REG(d, _INTC_ADDR_E(ihp->handle), 0); + intc_reg_fns[_INTC_FN(ihp->handle)](addr, ihp->handle, value); } - - return -EINVAL; + return 0; } -static unsigned int __init intc_find_mask_handler(unsigned int width) +static unsigned int __init intc_get_reg(struct intc_desc_int *d, + unsigned long address) { - switch (width) { - case 8: - return REG_FN_MASK_8; - case 32: - return REG_FN_MASK_32; - } + unsigned int k; - BUG(); - return REG_FN_ERROR; -} - -static unsigned int __init intc_find_prio_handler(unsigned int width) -{ - switch (width) { - case 16: - return REG_FN_PRIO_16; - case 32: - return REG_FN_PRIO_32; + for (k = 0; k < d->nr_reg; k++) { + if (d->reg[k] == address) + return k; } BUG(); - return REG_FN_ERROR; + return 0; } -static intc_enum __init intc_grp_id(struct intc_desc *desc, intc_enum enum_id) +static intc_enum __init intc_grp_id(struct intc_desc *desc, + intc_enum enum_id) { struct intc_group *g = desc->groups; unsigned int i, j; @@ -289,10 +361,12 @@ static unsigned int __init intc_prio_val } static unsigned int __init intc_mask_data(struct intc_desc *desc, + struct intc_desc_int *d, intc_enum enum_id, int do_grps) { struct intc_mask_reg *mr = desc->mask_regs; - unsigned int i, j, fn; + unsigned int i, j, fn, mode; + unsigned long reg_e, reg_d; for (i = 0; mr && enum_id && i < desc->nr_mask_regs; i++) { mr = desc->mask_regs + i; @@ -301,25 +375,46 @@ static unsigned int __init intc_mask_dat if (mr->enum_ids[j] != enum_id) continue; - fn = intc_find_mask_handler(mr->reg_width); - if (fn == REG_FN_ERROR) - return 0; + if (mr->set_reg && mr->clr_reg) { + fn = REG_FN_WRITE_BASE; + mode = MODE_DUAL_REG; + reg_e = mr->clr_reg; + reg_d = mr->set_reg; + } else { + fn = REG_FN_MODIFY_BASE; + if (mr->set_reg) { + mode = MODE_ENABLE_REG; + reg_e = mr->set_reg; + reg_d = mr->set_reg; + } else { + mode = MODE_MASK_REG; + reg_e = mr->clr_reg; + reg_d = mr->clr_reg; + } + } - return _INTC_MK(fn, i, (mr->reg_width - 1) - j, 0); + fn += (mr->reg_width >> 3) - 1; + return _INTC_MK(fn, mode, + intc_get_reg(d, reg_e), + intc_get_reg(d, reg_d), + 1, + (mr->reg_width - 1) - j); } } if (do_grps) - return intc_mask_data(desc, intc_grp_id(desc, enum_id), 0); + return intc_mask_data(desc, d, intc_grp_id(desc, enum_id), 0); return 0; } static unsigned int __init intc_prio_data(struct intc_desc *desc, + struct intc_desc_int *d, intc_enum enum_id, int do_grps) { struct intc_prio_reg *pr = desc->prio_regs; - unsigned int i, j, fn, bit, prio; + unsigned int i, j, fn, mode, bit; + unsigned long reg_e, reg_d; for (i = 0; pr && enum_id && i < desc->nr_prio_regs; i++) { pr = desc->prio_regs + i; @@ -328,28 +423,72 @@ static unsigned int __init intc_prio_dat if (pr->enum_ids[j] != enum_id) continue; - fn = intc_find_prio_handler(pr->reg_width); - if (fn == REG_FN_ERROR) - return 0; + if (pr->set_reg && pr->clr_reg) { + fn = REG_FN_WRITE_BASE; + mode = MODE_PCLR_REG; + reg_e = pr->set_reg; + reg_d = pr->clr_reg; + } else { + fn = REG_FN_MODIFY_BASE; + mode = MODE_PRIO_REG; + if (!pr->set_reg) + BUG(); + reg_e = pr->set_reg; + reg_d = pr->set_reg; + } - prio = intc_prio_value(desc, enum_id, 1); + fn += (pr->reg_width >> 3) - 1; bit = pr->reg_width - ((j + 1) * pr->field_width); BUG_ON(bit < 0); - return _INTC_MK(fn, i, bit, prio); + return _INTC_MK(fn, mode, + intc_get_reg(d, reg_e), + intc_get_reg(d, reg_d), + pr->field_width, bit); } } if (do_grps) - return intc_prio_data(desc, intc_grp_id(desc, enum_id), 0); + return intc_prio_data(desc, d, intc_grp_id(desc, enum_id), 0); return 0; } -static void __init intc_register_irq(struct intc_desc *desc, intc_enum enum_id, +static unsigned int __init intc_sense_data(struct intc_desc *desc, + struct intc_desc_int *d, + intc_enum enum_id) +{ + struct intc_sense_reg *sr = desc->sense_regs; + unsigned int i, j, fn, bit; + + for (i = 0; sr && enum_id && i < desc->nr_sense_regs; i++) { + sr = desc->sense_regs + i; + + for (j = 0; j < ARRAY_SIZE(sr->enum_ids); j++) { + if (sr->enum_ids[j] != enum_id) + continue; + + fn = REG_FN_MODIFY_BASE; + fn += (sr->reg_width >> 3) - 1; + bit = sr->reg_width - ((j + 1) * sr->field_width); + + BUG_ON(bit < 0); + + return _INTC_MK(fn, 0, intc_get_reg(d, sr->reg), + 0, sr->field_width, bit); + } + } + + return 0; +} + +static void __init intc_register_irq(struct intc_desc *desc, + struct intc_desc_int *d, + intc_enum enum_id, unsigned int irq) { + struct intc_handle_int *hp; unsigned int data[2], primary; /* Prefer single interrupt source bitmap over other combinations: @@ -359,15 +498,15 @@ static void __init intc_register_irq(str * 4. priority, multiple interrupt sources (groups) */ - data[0] = intc_mask_data(desc, enum_id, 0); - data[1] = intc_prio_data(desc, enum_id, 0); + data[0] = intc_mask_data(desc, d, enum_id, 0); + data[1] = intc_prio_data(desc, d, enum_id, 0); primary = 0; if (!data[0] && data[1]) primary = 1; - data[0] = data[0] ? data[0] : intc_mask_data(desc, enum_id, 1); - data[1] = data[1] ? data[1] : intc_prio_data(desc, enum_id, 1); + data[0] = data[0] ? data[0] : intc_mask_data(desc, d, enum_id, 1); + data[1] = data[1] ? data[1] : intc_prio_data(desc, d, enum_id, 1); if (!data[primary]) primary ^= 1; @@ -375,31 +514,118 @@ static void __init intc_register_irq(str BUG_ON(!data[primary]); /* must have primary masking method */ disable_irq_nosync(irq); - set_irq_chip_and_handler_name(irq, &desc->chip, + set_irq_chip_and_handler_name(irq, &d->chip, handle_level_irq, "level"); set_irq_chip_data(irq, (void *)data[primary]); + /* record the desired priority level */ + intc_prio_level[irq] = intc_prio_value(desc, enum_id, 1); + /* enable secondary masking method if present */ if (data[!primary]) - intc_reg_fns[_INTC_FN(data[!primary])].enable(desc, - data[!primary]); + _intc_enable(irq, data[!primary]); + + /* add irq to d->prio list if priority is available */ + if (data[1]) { + hp = d->prio + d->nr_prio; + hp->irq = irq; + hp->handle = data[1]; + + if (primary) { + /* + * only secondary priority should access registers, so + * set _INTC_FN(h) = REG_FN_ERR for intc_set_priority() + */ + + hp->handle &= ~_INTC_MK(0x0f, 0, 0, 0, 0, 0); + hp->handle |= _INTC_MK(REG_FN_ERR, 0, 0, 0, 0, 0); + } + d->nr_prio++; + } + + /* add irq to d->sense list if sense is available */ + data[0] = intc_sense_data(desc, d, enum_id); + if (data[0]) { + (d->sense + d->nr_sense)->irq = irq; + (d->sense + d->nr_sense)->handle = data[0]; + d->nr_sense++; + } /* irq should be disabled by default */ - desc->chip.mask(irq); + d->chip.mask(irq); } +static unsigned int __init save_reg(struct intc_desc_int *d, + unsigned int cnt, + unsigned long value, + unsigned int smp) +{ + if (value) { + d->reg[cnt] = value; +#ifdef CONFIG_SMP + d->smp[cnt] = smp; +#endif + return 1; + } + + return 0; +} + + void __init register_intc_controller(struct intc_desc *desc) { - unsigned int i; + unsigned int i, k, smp; + struct intc_desc_int *d; + + d = alloc_bootmem(sizeof(*d)); + + d->nr_reg = desc->mask_regs ? desc->nr_mask_regs * 2 : 0; + d->nr_reg += desc->prio_regs ? desc->nr_prio_regs * 2 : 0; + d->nr_reg += desc->sense_regs ? desc->nr_sense_regs : 0; + + d->reg = alloc_bootmem(d->nr_reg * sizeof(*d->reg)); +#ifdef CONFIG_SMP + d->smp = alloc_bootmem(d->nr_reg * sizeof(*d->smp)); +#endif + k = 0; + + if (desc->mask_regs) { + for (i = 0; i < desc->nr_mask_regs; i++) { + smp = IS_SMP(desc->mask_regs[i]); + k += save_reg(d, k, desc->mask_regs[i].set_reg, smp); + k += save_reg(d, k, desc->mask_regs[i].clr_reg, smp); + } + } + + if (desc->prio_regs) { + d->prio = alloc_bootmem(desc->nr_vectors * sizeof(*d->prio)); + + for (i = 0; i < desc->nr_prio_regs; i++) { + smp = IS_SMP(desc->prio_regs[i]); + k += save_reg(d, k, desc->prio_regs[i].set_reg, smp); + k += save_reg(d, k, desc->prio_regs[i].clr_reg, smp); + } + } + + if (desc->sense_regs) { + d->sense = alloc_bootmem(desc->nr_vectors * sizeof(*d->sense)); + + for (i = 0; i < desc->nr_sense_regs; i++) { + k += save_reg(d, k, desc->sense_regs[i].reg, 0); + } + } + + BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */ - desc->chip.mask = intc_disable; - desc->chip.unmask = intc_enable; - desc->chip.mask_ack = intc_disable; - desc->chip.set_type = intc_set_sense; + d->chip.name = desc->name; + d->chip.mask = intc_disable; + d->chip.unmask = intc_enable; + d->chip.mask_ack = intc_disable; + d->chip.set_type = intc_set_sense; for (i = 0; i < desc->nr_vectors; i++) { struct intc_vect *vect = desc->vectors + i; - intc_register_irq(desc, vect->enum_id, evt2irq(vect->vect)); + intc_register_irq(desc, d, vect->enum_id, evt2irq(vect->vect)); } } diff --git a/arch/sh/kernel/cpu/irq/intc2.c b/arch/sh/kernel/cpu/irq/intc2.c deleted file mode 100644 index cc52213..0000000 --- a/arch/sh/kernel/cpu/irq/intc2.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Interrupt handling for INTC2-based IRQ. - * - * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) - * Copyright (C) 2005, 2006 Paul Mundt (lethal@linux-sh.org) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * These are the "new Hitachi style" interrupts, as present on the - * Hitachi 7751, the STM ST40 STB1, SH7760, and SH7780. - */ -#include -#include -#include -#include - -static inline struct intc2_desc *get_intc2_desc(unsigned int irq) -{ - struct irq_chip *chip = get_irq_chip(irq); - return (void *)((char *)chip - offsetof(struct intc2_desc, chip)); -} - -static void disable_intc2_irq(unsigned int irq) -{ - struct intc2_data *p = get_irq_chip_data(irq); - struct intc2_desc *d = get_intc2_desc(irq); - - ctrl_outl(1 << p->msk_shift, d->msk_base + p->msk_offset + - (hard_smp_processor_id() * 4)); -} - -static void enable_intc2_irq(unsigned int irq) -{ - struct intc2_data *p = get_irq_chip_data(irq); - struct intc2_desc *d = get_intc2_desc(irq); - - ctrl_outl(1 << p->msk_shift, d->mskclr_base + p->msk_offset + - (hard_smp_processor_id() * 4)); -} - -/* - * Setup an INTC2 style interrupt. - * NOTE: Unlike IPR interrupts, parameters are not shifted by this code, - * allowing the use of the numbers straight out of the datasheet. - * For example: - * PIO1 which is INTPRI00[19,16] and INTMSK00[13] - * would be: ^ ^ ^ ^ - * | | | | - * { 84, 0, 16, 0, 13 }, - * - * in the intc2_data table. - */ -void register_intc2_controller(struct intc2_desc *desc) -{ - int i; - - desc->chip.mask = disable_intc2_irq; - desc->chip.unmask = enable_intc2_irq; - desc->chip.mask_ack = disable_intc2_irq; - - for (i = 0; i < desc->nr_irqs; i++) { - unsigned long ipr, flags; - struct intc2_data *p = desc->intc2_data + i; - - disable_irq_nosync(p->irq); - - if (desc->prio_base) { - /* Set the priority level */ - local_irq_save(flags); - - ipr = ctrl_inl(desc->prio_base + p->ipr_offset); - ipr &= ~(0xf << p->ipr_shift); - ipr |= p->priority << p->ipr_shift; - ctrl_outl(ipr, desc->prio_base + p->ipr_offset); - - local_irq_restore(flags); - } - - set_irq_chip_and_handler_name(p->irq, &desc->chip, - handle_level_irq, "level"); - set_irq_chip_data(p->irq, p); - - disable_intc2_irq(p->irq); - } -} diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c index a979b98..ec6adc3 100644 --- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -12,6 +12,61 @@ #include #include #include +enum { + UNUSED = 0, + + /* interrupt sources */ + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, + WDT, EDMAC, CMT0, CMT1, + SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, + SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI, + SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI, + HIF_HIFI, HIF_HIFBI, + DMAC0, DMAC1, DMAC2, DMAC3, + SIOF, + + /* interrupt groups */ + SCIF0, SCIF1, SCIF2, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65), + INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67), + INTC_IRQ(IRQ4, 80), INTC_IRQ(IRQ5, 81), + INTC_IRQ(IRQ6, 82), INTC_IRQ(IRQ7, 83), + INTC_IRQ(WDT, 84), INTC_IRQ(EDMAC, 85), + INTC_IRQ(CMT0, 86), INTC_IRQ(CMT1, 87), + INTC_IRQ(SCIF0_ERI, 88), INTC_IRQ(SCIF0_RXI, 89), + INTC_IRQ(SCIF0_BRI, 90), INTC_IRQ(SCIF0_TXI, 91), + INTC_IRQ(SCIF1_ERI, 92), INTC_IRQ(SCIF1_RXI, 93), + INTC_IRQ(SCIF1_BRI, 94), INTC_IRQ(SCIF1_TXI, 95), + INTC_IRQ(SCIF2_ERI, 96), INTC_IRQ(SCIF2_RXI, 97), + INTC_IRQ(SCIF2_BRI, 98), INTC_IRQ(SCIF2_TXI, 99), + INTC_IRQ(HIF_HIFI, 100), INTC_IRQ(HIF_HIFBI, 101), + INTC_IRQ(DMAC0, 104), INTC_IRQ(DMAC1, 105), + INTC_IRQ(DMAC2, 106), INTC_IRQ(DMAC3, 107), + INTC_IRQ(SIOF, 108), +}; + +static struct intc_group groups[] __initdata = { + INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), + INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI), + INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI), +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xf8140006, 0, 16, 4, /* IPRA */ { IRQ0, IRQ1, IRQ2, IRQ3 } }, + { 0xf8140008, 0, 16, 4, /* IPRB */ { IRQ4, IRQ5, IRQ6, IRQ7 } }, + { 0xf8080000, 0, 16, 4, /* IPRC */ { WDT, EDMAC, CMT0, CMT1 } }, + { 0xf8080002, 0, 16, 4, /* IPRD */ { SCIF0, SCIF1, SCIF2 } }, + { 0xf8080004, 0, 16, 4, /* IPRE */ { HIF_HIFI, HIF_HIFBI } }, + { 0xf8080006, 0, 16, 4, /* IPRF */ { DMAC0, DMAC1, DMAC2, DMAC3 } }, + { 0xf8080008, 0, 16, 4, /* IPRG */ { SIOF } }, +}; + +static DECLARE_INTC_DESC(intc_desc, "sh7619", vectors, groups, + NULL, NULL, prio_registers, NULL); + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xf8400000, @@ -52,43 +107,7 @@ static int __init sh7619_devices_setup(v } __initcall(sh7619_devices_setup); -static struct ipr_data ipr_irq_table[] = { - { 86, 0, 4, 2 }, /* CMI0 */ - { 88, 1, 12, 3 }, /* SCIF0_ERI */ - { 89, 1, 12, 3 }, /* SCIF0_RXI */ - { 90, 1, 12, 3 }, /* SCIF0_BRI */ - { 91, 1, 12, 3 }, /* SCIF0_TXI */ - { 92, 1, 8, 3 }, /* SCIF1_ERI */ - { 93, 1, 8, 3 }, /* SCIF1_RXI */ - { 94, 1, 8, 3 }, /* SCIF1_BRI */ - { 95, 1, 8, 3 }, /* SCIF1_TXI */ - { 96, 1, 4, 3 }, /* SCIF2_ERI */ - { 97, 1, 4, 3 }, /* SCIF2_RXI */ - { 98, 1, 4, 3 }, /* SCIF2_BRI */ - { 99, 1, 4, 3 }, /* SCIF2_TXI */ -}; - -static unsigned long ipr_offsets[] = { - 0xf8080000, /* IPRC */ - 0xf8080002, /* IPRD */ - 0xf8080004, /* IPRE */ - 0xf8080006, /* IPRF */ - 0xf8080008, /* IPRG */ -}; - -static struct ipr_desc ipr_irq_desc = { - .ipr_offsets = ipr_offsets, - .nr_offsets = ARRAY_SIZE(ipr_offsets), - - .ipr_data = ipr_irq_table, - .nr_irqs = ARRAY_SIZE(ipr_irq_table), - - .chip = { - .name = "IPR-sh7619", - }, -}; - void __init plat_irq_setup(void) { - register_ipr_controller(&ipr_irq_desc); + register_intc_controller(&intc_desc); } diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c index deab165..bd745aa 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c @@ -12,27 +12,184 @@ #include #include #include +enum { + UNUSED = 0, + + /* interrupt sources */ + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, + PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7, + ADC_ADI0, ADC_ADI1, + DMAC0_DEI, DMAC0_HEI, DMAC1_DEI, DMAC1_HEI, + DMAC2_DEI, DMAC2_HEI, DMAC3_DEI, DMAC3_HEI, + DMAC4_DEI, DMAC4_HEI, DMAC5_DEI, DMAC5_HEI, + DMAC6_DEI, DMAC6_HEI, DMAC7_DEI, DMAC7_HEI, + CMT0, CMT1, BSC, WDT, + MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D, + MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F, + MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U, + MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U, + MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V, + MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V, + MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W, + POE2_OEI1, POE2_OEI2, + MTU2S_TGI3A, MTU2S_TGI3B, MTU2S_TGI3C, MTU2S_TGI3D, MTU2S_TCI3V, + MTU2S_TGI4A, MTU2S_TGI4B, MTU2S_TGI4C, MTU2S_TGI4D, MTU2S_TCI4V, + MTU2S_TGI5U, MTU2S_TGI5V, MTU2S_TGI5W, + POE2_OEI3, + IIC3_STPI, IIC3_NAKI, IIC3_RXI, IIC3_TXI, IIC3_TEI, + SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI, + SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI, + SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI, + SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI, + + /* interrupt groups */ + PINT, DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7, + MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU, + MTU3_ABCD, MTU4_ABCD, MTU5, POE2_12, MTU3S_ABCD, MTU4S_ABCD, MTU5S, + IIC3, SCIF0, SCIF1, SCIF2, SCIF3, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65), + INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67), + INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69), + INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71), + INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81), + INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83), + INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85), + INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87), + INTC_IRQ(ADC_ADI0, 92), INTC_IRQ(ADC_ADI1, 96), + INTC_IRQ(DMAC0_DEI, 108), INTC_IRQ(DMAC0_HEI, 109), + INTC_IRQ(DMAC1_DEI, 112), INTC_IRQ(DMAC1_HEI, 113), + INTC_IRQ(DMAC2_DEI, 116), INTC_IRQ(DMAC2_HEI, 117), + INTC_IRQ(DMAC3_DEI, 120), INTC_IRQ(DMAC3_HEI, 121), + INTC_IRQ(DMAC4_DEI, 124), INTC_IRQ(DMAC4_HEI, 125), + INTC_IRQ(DMAC5_DEI, 128), INTC_IRQ(DMAC5_HEI, 129), + INTC_IRQ(DMAC6_DEI, 132), INTC_IRQ(DMAC6_HEI, 133), + INTC_IRQ(DMAC7_DEI, 136), INTC_IRQ(DMAC7_HEI, 137), + INTC_IRQ(CMT0, 140), INTC_IRQ(CMT1, 144), + INTC_IRQ(BSC, 148), INTC_IRQ(WDT, 152), + INTC_IRQ(MTU2_TGI0A, 156), INTC_IRQ(MTU2_TGI0B, 157), + INTC_IRQ(MTU2_TGI0C, 158), INTC_IRQ(MTU2_TGI0D, 159), + INTC_IRQ(MTU2_TCI0V, 160), + INTC_IRQ(MTU2_TGI0E, 161), INTC_IRQ(MTU2_TGI0F, 162), + INTC_IRQ(MTU2_TGI1A, 164), INTC_IRQ(MTU2_TGI1B, 165), + INTC_IRQ(MTU2_TCI1V, 168), INTC_IRQ(MTU2_TCI1U, 169), + INTC_IRQ(MTU2_TGI2A, 172), INTC_IRQ(MTU2_TGI2B, 173), + INTC_IRQ(MTU2_TCI2V, 176), INTC_IRQ(MTU2_TCI2U, 177), + INTC_IRQ(MTU2_TGI3A, 180), INTC_IRQ(MTU2_TGI3B, 181), + INTC_IRQ(MTU2_TGI3C, 182), INTC_IRQ(MTU2_TGI3D, 183), + INTC_IRQ(MTU2_TCI3V, 184), + INTC_IRQ(MTU2_TGI4A, 188), INTC_IRQ(MTU2_TGI4B, 189), + INTC_IRQ(MTU2_TGI4C, 190), INTC_IRQ(MTU2_TGI4D, 191), + INTC_IRQ(MTU2_TCI4V, 192), + INTC_IRQ(MTU2_TGI5U, 196), INTC_IRQ(MTU2_TGI5V, 197), + INTC_IRQ(MTU2_TGI5W, 198), + INTC_IRQ(POE2_OEI1, 200), INTC_IRQ(POE2_OEI2, 201), + INTC_IRQ(MTU2S_TGI3A, 204), INTC_IRQ(MTU2S_TGI3B, 205), + INTC_IRQ(MTU2S_TGI3C, 206), INTC_IRQ(MTU2S_TGI3D, 207), + INTC_IRQ(MTU2S_TCI3V, 208), + INTC_IRQ(MTU2S_TGI4A, 212), INTC_IRQ(MTU2S_TGI4B, 213), + INTC_IRQ(MTU2S_TGI4C, 214), INTC_IRQ(MTU2S_TGI4D, 215), + INTC_IRQ(MTU2S_TCI4V, 216), + INTC_IRQ(MTU2S_TGI5U, 220), INTC_IRQ(MTU2S_TGI5V, 221), + INTC_IRQ(MTU2S_TGI5W, 222), + INTC_IRQ(POE2_OEI3, 224), + INTC_IRQ(IIC3_STPI, 228), INTC_IRQ(IIC3_NAKI, 229), + INTC_IRQ(IIC3_RXI, 230), INTC_IRQ(IIC3_TXI, 231), + INTC_IRQ(IIC3_TEI, 232), + INTC_IRQ(SCIF0_BRI, 240), INTC_IRQ(SCIF0_ERI, 241), + INTC_IRQ(SCIF0_RXI, 242), INTC_IRQ(SCIF0_TXI, 243), + INTC_IRQ(SCIF1_BRI, 244), INTC_IRQ(SCIF1_ERI, 245), + INTC_IRQ(SCIF1_RXI, 246), INTC_IRQ(SCIF1_TXI, 247), + INTC_IRQ(SCIF2_BRI, 248), INTC_IRQ(SCIF2_ERI, 249), + INTC_IRQ(SCIF2_RXI, 250), INTC_IRQ(SCIF2_TXI, 251), + INTC_IRQ(SCIF3_BRI, 252), INTC_IRQ(SCIF3_ERI, 253), + INTC_IRQ(SCIF3_RXI, 254), INTC_IRQ(SCIF3_TXI, 255), +}; + +static struct intc_group groups[] __initdata = { + INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3, + PINT4, PINT5, PINT6, PINT7), + INTC_GROUP(DMAC0, DMAC0_DEI, DMAC0_HEI), + INTC_GROUP(DMAC1, DMAC1_DEI, DMAC1_HEI), + INTC_GROUP(DMAC2, DMAC2_DEI, DMAC2_HEI), + INTC_GROUP(DMAC3, DMAC3_DEI, DMAC3_HEI), + INTC_GROUP(DMAC4, DMAC4_DEI, DMAC4_HEI), + INTC_GROUP(DMAC5, DMAC5_DEI, DMAC5_HEI), + INTC_GROUP(DMAC6, DMAC6_DEI, DMAC6_HEI), + INTC_GROUP(DMAC7, DMAC7_DEI, DMAC7_HEI), + INTC_GROUP(MTU0_ABCD, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D), + INTC_GROUP(MTU0_VEF, MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F), + INTC_GROUP(MTU1_AB, MTU2_TGI1A, MTU2_TGI1B), + INTC_GROUP(MTU1_VU, MTU2_TCI1V, MTU2_TCI1U), + INTC_GROUP(MTU2_AB, MTU2_TGI2A, MTU2_TGI2B), + INTC_GROUP(MTU2_VU, MTU2_TCI2V, MTU2_TCI2U), + INTC_GROUP(MTU3_ABCD, MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D), + INTC_GROUP(MTU4_ABCD, MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D), + INTC_GROUP(MTU5, MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W), + INTC_GROUP(POE2_12, POE2_OEI1, POE2_OEI2), + INTC_GROUP(MTU3S_ABCD, MTU2S_TGI3A, MTU2S_TGI3B, + MTU2S_TGI3C, MTU2S_TGI3D), + INTC_GROUP(MTU4S_ABCD, MTU2S_TGI4A, MTU2S_TGI4B, + MTU2S_TGI4C, MTU2S_TGI4D), + INTC_GROUP(MTU5S, MTU2S_TGI5U, MTU2S_TGI5V, MTU2S_TGI5W), + INTC_GROUP(IIC3, IIC3_STPI, IIC3_NAKI, IIC3_RXI, IIC3_TXI, IIC3_TEI), + INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI), + INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI), + INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI), + INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI), +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xfffe0818, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } }, + { 0xfffe081a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } }, + { 0xfffe0820, 0, 16, 4, /* IPR05 */ { PINT, 0, ADC_ADI0, ADC_ADI1 } }, + { 0xfffe0c00, 0, 16, 4, /* IPR06 */ { DMAC0, DMAC1, DMAC2, DMAC3 } }, + { 0xfffe0c02, 0, 16, 4, /* IPR07 */ { DMAC4, DMAC5, DMAC6, DMAC7 } }, + { 0xfffe0c04, 0, 16, 4, /* IPR08 */ { CMT0, CMT1, BSC, WDT } }, + { 0xfffe0c06, 0, 16, 4, /* IPR09 */ { MTU0_ABCD, MTU0_VEF, + MTU1_AB, MTU1_VU } }, + { 0xfffe0c08, 0, 16, 4, /* IPR10 */ { MTU2_AB, MTU2_VU, + MTU3_ABCD, MTU2_TCI3V } }, + { 0xfffe0c0a, 0, 16, 4, /* IPR11 */ { MTU4_ABCD, MTU2_TCI4V, + MTU5, POE2_12 } }, + { 0xfffe0c0c, 0, 16, 4, /* IPR12 */ { MTU3S_ABCD, MTU2S_TCI3V, + MTU4S_ABCD, MTU2S_TCI4V } }, + { 0xfffe0c0e, 0, 16, 4, /* IPR13 */ { MTU5S, POE2_OEI3, IIC3, 0 } }, + { 0xfffe0c10, 0, 16, 4, /* IPR14 */ { SCIF0, SCIF1, SCIF2, SCIF3 } }, +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xfffe0808, 0, 16, /* PINTER */ + { 0, 0, 0, 0, 0, 0, 0, 0, + PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } }, +}; + +static DECLARE_INTC_DESC(intc_desc, "sh7206", vectors, groups, + NULL, mask_registers, prio_registers, NULL); + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xfffe8000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 241, 242, 243, 240}, + .irqs = { 241, 242, 243, 240 }, }, { .mapbase = 0xfffe8800, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 247, 244, 245, 246}, + .irqs = { 245, 246, 247, 244 }, }, { .mapbase = 0xfffe9000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 249, 250, 251, 248}, + .irqs = { 249, 250, 251, 248 }, }, { .mapbase = 0xfffe9800, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 253, 254, 255, 252}, + .irqs = { 253, 254, 255, 252 }, }, { .flags = 0, } @@ -57,57 +214,7 @@ static int __init sh7206_devices_setup(v } __initcall(sh7206_devices_setup); -static struct ipr_data ipr_irq_table[] = { - { 140, 7, 12, 2 }, /* CMI0 */ - { 164, 8, 4, 2 }, /* MTU2_TGI1A */ - { 240, 13, 12, 3 }, /* SCIF0_BRI */ - { 241, 13, 12, 3 }, /* SCIF0_ERI */ - { 242, 13, 12, 3 }, /* SCIF0_RXI */ - { 243, 13, 12, 3 }, /* SCIF0_TXI */ - { 244, 13, 8, 3 }, /* SCIF1_BRI */ - { 245, 13, 8, 3 }, /* SCIF1_ERI */ - { 246, 13, 8, 3 }, /* SCIF1_RXI */ - { 247, 13, 8, 3 }, /* SCIF1_TXI */ - { 248, 13, 4, 3 }, /* SCIF2_BRI */ - { 249, 13, 4, 3 }, /* SCIF2_ERI */ - { 250, 13, 4, 3 }, /* SCIF2_RXI */ - { 251, 13, 4, 3 }, /* SCIF2_TXI */ - { 252, 13, 0, 3 }, /* SCIF3_BRI */ - { 253, 13, 0, 3 }, /* SCIF3_ERI */ - { 254, 13, 0, 3 }, /* SCIF3_RXI */ - { 255, 13, 0, 3 }, /* SCIF3_TXI */ -}; - -static unsigned long ipr_offsets[] = { - 0xfffe0818, /* IPR01 */ - 0xfffe081a, /* IPR02 */ - 0, /* unused */ - 0, /* unused */ - 0xfffe0820, /* IPR05 */ - 0xfffe0c00, /* IPR06 */ - 0xfffe0c02, /* IPR07 */ - 0xfffe0c04, /* IPR08 */ - 0xfffe0c06, /* IPR09 */ - 0xfffe0c08, /* IPR10 */ - 0xfffe0c0a, /* IPR11 */ - 0xfffe0c0c, /* IPR12 */ - 0xfffe0c0e, /* IPR13 */ - 0xfffe0c10, /* IPR14 */ -}; - -static struct ipr_desc ipr_irq_desc = { - .ipr_offsets = ipr_offsets, - .nr_offsets = ARRAY_SIZE(ipr_offsets), - - .ipr_data = ipr_irq_table, - .nr_irqs = ARRAY_SIZE(ipr_irq_table), - - .chip = { - .name = "IPR-sh7206", - }, -}; - void __init plat_irq_setup(void) { - register_ipr_controller(&ipr_irq_desc); + register_intc_controller(&intc_desc); } diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile index 55b7507..646eb69 100644 --- a/arch/sh/kernel/cpu/sh3/Makefile +++ b/arch/sh/kernel/cpu/sh3/Makefile @@ -6,12 +6,13 @@ obj-y := ex.o probe.o entry.o # CPU subtype setup obj-$(CONFIG_CPU_SUBTYPE_SH7705) += setup-sh7705.o -obj-$(CONFIG_CPU_SUBTYPE_SH7706) += setup-sh7709.o -obj-$(CONFIG_CPU_SUBTYPE_SH7707) += setup-sh7709.o -obj-$(CONFIG_CPU_SUBTYPE_SH7708) += setup-sh7708.o -obj-$(CONFIG_CPU_SUBTYPE_SH7709) += setup-sh7709.o +obj-$(CONFIG_CPU_SUBTYPE_SH7706) += setup-sh770x.o +obj-$(CONFIG_CPU_SUBTYPE_SH7707) += setup-sh770x.o +obj-$(CONFIG_CPU_SUBTYPE_SH7708) += setup-sh770x.o +obj-$(CONFIG_CPU_SUBTYPE_SH7709) += setup-sh770x.o obj-$(CONFIG_CPU_SUBTYPE_SH7710) += setup-sh7710.o obj-$(CONFIG_CPU_SUBTYPE_SH7712) += setup-sh7710.o +obj-$(CONFIG_CPU_SUBTYPE_SH7720) += setup-sh7720.o # Primary on-chip clocks (common) clock-$(CONFIG_CPU_SH3) := clock-sh3.o @@ -19,5 +20,6 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7705) := cl clock-$(CONFIG_CPU_SUBTYPE_SH7706) := clock-sh7706.o clock-$(CONFIG_CPU_SUBTYPE_SH7709) := clock-sh7709.o clock-$(CONFIG_CPU_SUBTYPE_SH7710) := clock-sh7710.o +clock-$(CONFIG_CPU_SUBTYPE_SH7720) := clock-sh7710.o obj-y += $(clock-y) diff --git a/arch/sh/kernel/cpu/sh3/probe.c b/arch/sh/kernel/cpu/sh3/probe.c index 647623b..1a66cf6 100644 --- a/arch/sh/kernel/cpu/sh3/probe.c +++ b/arch/sh/kernel/cpu/sh3/probe.c @@ -81,6 +81,9 @@ #endif #if defined(CONFIG_CPU_SUBTYPE_SH7712) current_cpu_data.type = CPU_SH7712; #endif +#if defined(CONFIG_CPU_SUBTYPE_SH7720) + current_cpu_data.type = CPU_SH7720; +#endif #if defined(CONFIG_CPU_SUBTYPE_SH7705) current_cpu_data.type = CPU_SH7705; diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c index ebd9d06..f6c65f2 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c @@ -1,7 +1,7 @@ /* * SH7705 Setup * - * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2006, 2007 Paul Mundt * Copyright (C) 2007 Nobuhiro Iwamatsu * * This file is subject to the terms and conditions of the GNU General Public @@ -10,8 +10,90 @@ */ #include #include +#include #include #include +#include + +enum { + UNUSED = 0, + + /* interrupt sources */ + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, + PINT07, PINT815, + DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3, + SCIF0_ERI, SCIF0_RXI, SCIF0_TXI, + SCIF2_ERI, SCIF2_RXI, SCIF2_TXI, + ADC_ADI, + USB_USI0, USB_USI1, + TPU0, TPU1, TPU2, TPU3, + TMU0, TMU1, TMU2_TUNI, TMU2_TICPI, + RTC_ATI, RTC_PRI, RTC_CUI, + WDT, + REF_RCMI, + + /* interrupt groups */ + RTC, TMU2, DMAC, USB, SCIF2, SCIF0, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0), + INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720), + INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820), + INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860), + INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0), + INTC_VECT(SCIF0_TXI, 0x8e0), + INTC_VECT(SCIF2_ERI, 0x900), INTC_VECT(SCIF2_RXI, 0x920), + INTC_VECT(SCIF2_TXI, 0x960), + INTC_VECT(ADC_ADI, 0x980), + INTC_VECT(USB_USI0, 0xa20), INTC_VECT(USB_USI1, 0xa40), + INTC_VECT(TPU0, 0xc00), INTC_VECT(TPU1, 0xc20), + INTC_VECT(TPU3, 0xc80), INTC_VECT(TPU1, 0xca0), + INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), + INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460), + INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0), + INTC_VECT(RTC_CUI, 0x4c0), + INTC_VECT(WDT, 0x560), + INTC_VECT(REF_RCMI, 0x580), +}; + +static struct intc_group groups[] __initdata = { + INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), + INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI), + INTC_GROUP(DMAC, DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3), + INTC_GROUP(USB, USB_USI0, USB_USI1), + INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI), + INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI), +}; + +static struct intc_prio priorities[] __initdata = { + INTC_PRIO(DMAC, 7), + INTC_PRIO(SCIF2, 3), + INTC_PRIO(SCIF0, 3), +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, + { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, 0, 0 } }, + { 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } }, + { 0xa4000018, 0, 16, 4, /* IPRD */ { PINT07, PINT815, IRQ5, IRQ4 } }, + { 0xa400001a, 0, 16, 4, /* IPRE */ { DMAC, SCIF0, SCIF2, ADC_ADI } }, + { 0xa4080000, 0, 16, 4, /* IPRF */ { 0, 0, USB } }, + { 0xa4080002, 0, 16, 4, /* IPRG */ { TPU0, TPU1 } }, + { 0xa4080004, 0, 16, 4, /* IPRH */ { TPU2, TPU3 } }, + +}; + +static DECLARE_INTC_DESC(intc_desc, "sh7705", vectors, groups, + priorities, NULL, prio_registers, NULL); + +static struct intc_vect vectors_irq[] __initdata = { + INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), + INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660), +}; + +static DECLARE_INTC_DESC(intc_desc_irq, "sh7705-irq", vectors_irq, NULL, + priorities, NULL, prio_registers, NULL); static struct plat_sci_port sci_platform_data[] = { { @@ -37,8 +119,43 @@ static struct platform_device sci_device }, }; +static struct resource rtc_resources[] = { + [0] = { + .start = 0xfffffec0, + .end = 0xfffffec0 + 0x1e, + .flags = IORESOURCE_IO, + }, + [1] = { + .start = 20, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = 21, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = 22, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sh_rtc_platform_info rtc_info = { + .capabilities = RTC_CAP_4_DIGIT_YEAR, +}; + +static struct platform_device rtc_device = { + .name = "sh-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(rtc_resources), + .resource = rtc_resources, + .dev = { + .platform_data = &rtc_info, + }, +}; + static struct platform_device *sh7705_devices[] __initdata = { &sci_device, + &rtc_device, }; static int __init sh7705_devices_setup(void) @@ -48,51 +165,16 @@ static int __init sh7705_devices_setup(v } __initcall(sh7705_devices_setup); -static struct ipr_data ipr_irq_table[] = { - /* IRQ, IPR-idx, shift, priority */ - { 16, 0, 12, 2 }, /* TMU0 TUNI*/ - { 17, 0, 8, 2 }, /* TMU1 TUNI */ - { 18, 0, 4, 2 }, /* TMU2 TUNI */ - { 27, 1, 12, 2 }, /* WDT ITI */ - { 20, 0, 0, 2 }, /* RTC ATI (alarm) */ - { 21, 0, 0, 2 }, /* RTC PRI (period) */ - { 22, 0, 0, 2 }, /* RTC CUI (carry) */ - { 48, 4, 12, 7 }, /* DMAC DMTE0 */ - { 49, 4, 12, 7 }, /* DMAC DMTE1 */ - { 50, 4, 12, 7 }, /* DMAC DMTE2 */ - { 51, 4, 12, 7 }, /* DMAC DMTE3 */ - { 52, 4, 8, 3 }, /* SCIF0 ERI */ - { 53, 4, 8, 3 }, /* SCIF0 RXI */ - { 55, 4, 8, 3 }, /* SCIF0 TXI */ - { 56, 4, 4, 3 }, /* SCIF1 ERI */ - { 57, 4, 4, 3 }, /* SCIF1 RXI */ - { 59, 4, 4, 3 }, /* SCIF1 TXI */ -}; - -static unsigned long ipr_offsets[] = { - 0xFFFFFEE2, /* 0: IPRA */ - 0xFFFFFEE4, /* 1: IPRB */ - 0xA4000016, /* 2: IPRC */ - 0xA4000018, /* 3: IPRD */ - 0xA400001A, /* 4: IPRE */ - 0xA4080000, /* 5: IPRF */ - 0xA4080002, /* 6: IPRG */ - 0xA4080004, /* 7: IPRH */ -}; - -static struct ipr_desc ipr_irq_desc = { - .ipr_offsets = ipr_offsets, - .nr_offsets = ARRAY_SIZE(ipr_offsets), - - .ipr_data = ipr_irq_table, - .nr_irqs = ARRAY_SIZE(ipr_irq_table), - - .chip = { - .name = "IPR-sh7705", - }, -}; +void __init plat_irq_setup_pins(int mode) +{ + if (mode == IRQ_MODE_IRQ) { + register_intc_controller(&intc_desc_irq); + return; + } + BUG(); +} void __init plat_irq_setup(void) { - register_ipr_controller(&ipr_irq_desc); + register_intc_controller(&intc_desc); } diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7708.c b/arch/sh/kernel/cpu/sh3/setup-sh7708.c deleted file mode 100644 index f933723..0000000 --- a/arch/sh/kernel/cpu/sh3/setup-sh7708.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * SH7708 Setup - * - * Copyright (C) 2006 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include - -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xfffffe80, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCI, - .irqs = { 23, 24, 25, 0 }, - }, { - .flags = 0, - } -}; - -static struct platform_device sci_device = { - .name = "sh-sci", - .id = -1, - .dev = { - .platform_data = sci_platform_data, - }, -}; - -static struct platform_device *sh7708_devices[] __initdata = { - &sci_device, -}; - -static int __init sh7708_devices_setup(void) -{ - return platform_add_devices(sh7708_devices, - ARRAY_SIZE(sh7708_devices)); -} -__initcall(sh7708_devices_setup); diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7709.c b/arch/sh/kernel/cpu/sh3/setup-sh7709.c deleted file mode 100644 index 086f8e2..0000000 --- a/arch/sh/kernel/cpu/sh3/setup-sh7709.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - * SH7707/SH7709 Setup - * - * Copyright (C) 2006 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include - -static struct resource rtc_resources[] = { - [0] = { - .start = 0xfffffec0, - .end = 0xfffffec0 + 0x1e, - .flags = IORESOURCE_IO, - }, - [1] = { - .start = 20, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = 21, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = 22, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xfffffe80, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCI, - .irqs = { 23, 24, 25, 0 }, - }, { - .mapbase = 0xa4000150, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 56, 57, 59, 58 }, - }, { - .mapbase = 0xa4000140, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_IRDA, - .irqs = { 52, 53, 55, 54 }, - }, { - .flags = 0, - } -}; - -static struct platform_device sci_device = { - .name = "sh-sci", - .id = -1, - .dev = { - .platform_data = sci_platform_data, - }, -}; - -static struct platform_device rtc_device = { - .name = "sh-rtc", - .id = -1, - .num_resources = ARRAY_SIZE(rtc_resources), - .resource = rtc_resources, -}; - -static struct platform_device *sh7709_devices[] __initdata = { - &sci_device, - &rtc_device, -}; - -static int __init sh7709_devices_setup(void) -{ - return platform_add_devices(sh7709_devices, - ARRAY_SIZE(sh7709_devices)); -} -__initcall(sh7709_devices_setup); - -static struct ipr_data ipr_irq_table[] = { - { 16, 0, 12, 2 }, /* TMU TUNI0 */ - { 17, 0, 8, 4 }, /* TMU TUNI1 */ - { 18, 0, 4, 1 }, /* TMU TUNI1 */ - { 19, 0, 4, 1 }, /* TMU TUNI1 */ - { 20, 0, 0, 2 }, /* RTC CUI */ - { 21, 0, 0, 2 }, /* RTC CUI */ - { 22, 0, 0, 2 }, /* RTC CUI */ - - { 23, 1, 4, 3 }, /* SCI */ - { 24, 1, 4, 3 }, /* SCI */ - { 25, 1, 4, 3 }, /* SCI */ - { 26, 1, 4, 3 }, /* SCI */ - { 27, 1, 12, 3 }, /* WDT ITI */ - - { 32, 2, 0, 1 }, /* IRQ 0 */ - { 33, 2, 4, 1 }, /* IRQ 1 */ - { 34, 2, 8, 1 }, /* IRQ 2 APM */ - { 35, 2, 12, 1 }, /* IRQ 3 TOUCHSCREEN */ - - { 36, 3, 0, 1 }, /* IRQ 4 */ - { 37, 3, 4, 1 }, /* IRQ 5 */ - - { 48, 4, 12, 7 }, /* DMA */ - { 49, 4, 12, 7 }, /* DMA */ - { 50, 4, 12, 7 }, /* DMA */ - { 51, 4, 12, 7 }, /* DMA */ - - { 52, 4, 8, 3 }, /* IRDA */ - { 53, 4, 8, 3 }, /* IRDA */ - { 54, 4, 8, 3 }, /* IRDA */ - { 55, 4, 8, 3 }, /* IRDA */ - - { 56, 4, 4, 3 }, /* SCIF */ - { 57, 4, 4, 3 }, /* SCIF */ - { 58, 4, 4, 3 }, /* SCIF */ - { 59, 4, 4, 3 }, /* SCIF */ -}; - -static unsigned long ipr_offsets[] = { - 0xfffffee2, /* 0: IPRA */ - 0xfffffee4, /* 1: IPRB */ - 0xa4000016, /* 2: IPRC */ - 0xa4000018, /* 3: IPRD */ - 0xa400001a, /* 4: IPRE */ -}; - -static struct ipr_desc ipr_irq_desc = { - .ipr_offsets = ipr_offsets, - .nr_offsets = ARRAY_SIZE(ipr_offsets), - - .ipr_data = ipr_irq_table, - .nr_irqs = ARRAY_SIZE(ipr_irq_table), - - .chip = { - .name = "IPR-sh7709", - }, -}; - -void __init plat_irq_setup(void) -{ - register_ipr_controller(&ipr_irq_desc); -} diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c new file mode 100644 index 0000000..60b04b1 --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -0,0 +1,224 @@ +/* + * SH3 Setup code for SH7706, SH7707, SH7708, SH7709 + * + * Copyright (C) 2007 Magnus Damm + * + * Based on setup-sh7709.c + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include + +enum { + UNUSED = 0, + + /* interrupt sources */ + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, + PINT07, PINT815, + DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3, + SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, + SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI, + SCI_ERI, SCI_RXI, SCI_TXI, SCI_TEI, + ADC_ADI, + LCDC, PCC0, PCC1, + TMU0, TMU1, TMU2_TUNI, TMU2_TICPI, + RTC_ATI, RTC_PRI, RTC_CUI, + WDT, + REF_RCMI, REF_ROVI, + + /* interrupt groups */ + RTC, REF, TMU2, DMAC, SCI, SCIF2, SCIF0, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), + INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460), + INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0), + INTC_VECT(RTC_CUI, 0x4c0), + INTC_VECT(SCI_ERI, 0x4e0), INTC_VECT(SCI_RXI, 0x500), + INTC_VECT(SCI_TXI, 0x520), INTC_VECT(SCI_TEI, 0x540), + INTC_VECT(WDT, 0x560), + INTC_VECT(REF_RCMI, 0x580), + INTC_VECT(REF_ROVI, 0x5a0), +#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ + defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) + INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0), + INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820), + INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860), + INTC_VECT(ADC_ADI, 0x980), + INTC_VECT(SCIF2_ERI, 0x900), INTC_VECT(SCIF2_RXI, 0x920), + INTC_VECT(SCIF2_BRI, 0x940), INTC_VECT(SCIF2_TXI, 0x960), +#endif +#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) + INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720), + INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0), + INTC_VECT(SCIF0_BRI, 0x8c0), INTC_VECT(SCIF0_TXI, 0x8e0), +#endif +#if defined(CONFIG_CPU_SUBTYPE_SH7707) + INTC_VECT(LCDC, 0x9a0), + INTC_VECT(PCC0, 0x9c0), INTC_VECT(PCC1, 0x9e0), +#endif +}; + +static struct intc_group groups[] __initdata = { + INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), + INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI), + INTC_GROUP(REF, REF_RCMI, REF_ROVI), + INTC_GROUP(DMAC, DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3), + INTC_GROUP(SCI, SCI_ERI, SCI_RXI, SCI_TXI, SCI_TEI), + INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), + INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI), +}; + +static struct intc_prio priorities[] __initdata = { + INTC_PRIO(DMAC, 7), + INTC_PRIO(SCI, 3), + INTC_PRIO(SCIF2, 3), + INTC_PRIO(SCIF0, 3), +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, + { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF, SCI, 0 } }, +#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ + defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) + { 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } }, + { 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } }, + { 0xa400001a, 0, 16, 4, /* IPRE */ { DMAC, 0, SCIF2, ADC_ADI } }, +#endif +#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) + { 0xa4000018, 0, 16, 4, /* IPRD */ { PINT07, PINT815, } }, + { 0xa400001a, 0, 16, 4, /* IPRE */ { 0, SCIF0 } }, +#endif +#if defined(CONFIG_CPU_SUBTYPE_SH7707) + { 0xa400001c, 0, 16, 4, /* IPRF */ { 0, LCDC, PCC0, PCC1, } }, +#endif +}; + +static DECLARE_INTC_DESC(intc_desc, "sh770x", vectors, groups, + priorities, NULL, prio_registers, NULL); + +#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ + defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) +static struct intc_vect vectors_irq[] __initdata = { + INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), + INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660), +}; + +static DECLARE_INTC_DESC(intc_desc_irq, "sh770x-irq", vectors_irq, NULL, + priorities, NULL, prio_registers, NULL); +#endif + +static struct resource rtc_resources[] = { + [0] = { + .start = 0xfffffec0, + .end = 0xfffffec0 + 0x1e, + .flags = IORESOURCE_IO, + }, + [1] = { + .start = 20, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = 21, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = 22, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device rtc_device = { + .name = "sh-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(rtc_resources), + .resource = rtc_resources, +}; + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xfffffe80, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCI, + .irqs = { 23, 24, 25, 0 }, + }, +#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ + defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) + { + .mapbase = 0xa4000150, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 56, 57, 59, 58 }, + }, +#endif +#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) + { + .mapbase = 0xa4000140, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_IRDA, + .irqs = { 52, 53, 55, 54 }, + }, +#endif + { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *sh770x_devices[] __initdata = { + &sci_device, + &rtc_device, +}; + +static int __init sh770x_devices_setup(void) +{ + return platform_add_devices(sh770x_devices, + ARRAY_SIZE(sh770x_devices)); +} +__initcall(sh770x_devices_setup); + +#define INTC_ICR1 0xa4000010UL +#define INTC_ICR1_IRQLVL (1<<14) + +void __init plat_irq_setup_pins(int mode) +{ + if (mode == IRQ_MODE_IRQ) { +#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ + defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) + ctrl_outw(ctrl_inw(INTC_ICR1) & ~INTC_ICR1_IRQLVL, INTC_ICR1); + register_intc_controller(&intc_desc_irq); + return; +#endif + } + BUG(); +} + +void __init plat_irq_setup(void) +{ + register_intc_controller(&intc_desc); +} diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c index 1322848..84e5629 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c @@ -1,7 +1,7 @@ /* - * SH7710 Setup + * SH3 Setup code for SH7710, SH7712 * - * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2006, 2007 Paul Mundt * Copyright (C) 2007 Nobuhiro Iwamatsu * * This file is subject to the terms and conditions of the GNU General Public @@ -10,8 +10,140 @@ */ #include #include +#include #include #include +#include + +enum { + UNUSED = 0, + + /* interrupt sources */ + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, + DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3, + SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, + SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI, + DMAC_DEI4, DMAC_DEI5, + IPSEC, + EDMAC0, EDMAC1, EDMAC2, + SIOF0_ERI, SIOF0_TXI, SIOF0_RXI, SIOF0_CCI, + SIOF1_ERI, SIOF1_TXI, SIOF1_RXI, SIOF1_CCI, + TMU0, TMU1, TMU2, + RTC_ATI, RTC_PRI, RTC_CUI, + WDT, + REF, + + /* interrupt groups */ + RTC, DMAC1, SCIF0, SCIF1, DMAC2, SIOF0, SIOF1, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0), + INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820), + INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860), + INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0), + INTC_VECT(SCIF0_BRI, 0x8c0), INTC_VECT(SCIF0_TXI, 0x8e0), + INTC_VECT(SCIF1_ERI, 0x900), INTC_VECT(SCIF1_RXI, 0x920), + INTC_VECT(SCIF1_BRI, 0x940), INTC_VECT(SCIF1_TXI, 0x960), + INTC_VECT(DMAC_DEI4, 0xb80), INTC_VECT(DMAC_DEI5, 0xba0), +#ifdef CONFIG_CPU_SUBTYPE_SH7710 + INTC_VECT(IPSEC, 0xbe0), +#endif + INTC_VECT(EDMAC0, 0xc00), INTC_VECT(EDMAC1, 0xc20), + INTC_VECT(EDMAC2, 0xc40), + INTC_VECT(SIOF0_ERI, 0xe00), INTC_VECT(SIOF0_TXI, 0xe20), + INTC_VECT(SIOF0_RXI, 0xe40), INTC_VECT(SIOF0_CCI, 0xe60), + INTC_VECT(SIOF1_ERI, 0xe80), INTC_VECT(SIOF1_TXI, 0xea0), + INTC_VECT(SIOF1_RXI, 0xec0), INTC_VECT(SIOF1_CCI, 0xee0), + INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), + INTC_VECT(TMU2, 0x440), + INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0), + INTC_VECT(RTC_CUI, 0x4c0), + INTC_VECT(WDT, 0x560), + INTC_VECT(REF, 0x580), +}; + +static struct intc_group groups[] __initdata = { + INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), + INTC_GROUP(DMAC1, DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3), + INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), + INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI), + INTC_GROUP(DMAC2, DMAC_DEI4, DMAC_DEI5), + INTC_GROUP(SIOF0, SIOF0_ERI, SIOF0_TXI, SIOF0_RXI, SIOF0_CCI), + INTC_GROUP(SIOF1, SIOF1_ERI, SIOF1_TXI, SIOF1_RXI, SIOF1_CCI), +}; + +static struct intc_prio priorities[] __initdata = { + INTC_PRIO(DMAC1, 7), + INTC_PRIO(DMAC2, 7), + INTC_PRIO(SCIF0, 3), + INTC_PRIO(SCIF1, 3), + INTC_PRIO(SIOF0, 3), + INTC_PRIO(SIOF1, 3), + INTC_PRIO(EDMAC0, 5), + INTC_PRIO(EDMAC1, 5), + INTC_PRIO(EDMAC2, 5), +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, + { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF, 0, 0 } }, + { 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } }, + { 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } }, + { 0xa400001a, 0, 16, 4, /* IPRE */ { DMAC1, SCIF0, SCIF1 } }, + { 0xa4080000, 0, 16, 4, /* IPRF */ { 0, DMAC2 } }, +#ifdef CONFIG_CPU_SUBTYPE_SH7710 + { 0xa4080000, 0, 16, 4, /* IPRF */ { IPSEC } }, +#endif + { 0xa4080002, 0, 16, 4, /* IPRG */ { EDMAC0, EDMAC1, EDMAC2 } }, + { 0xa4080004, 0, 16, 4, /* IPRH */ { 0, 0, 0, SIOF0 } }, + { 0xa4080006, 0, 16, 4, /* IPRI */ { 0, 0, SIOF1 } }, +}; + +static DECLARE_INTC_DESC(intc_desc, "sh7710", vectors, groups, + priorities, NULL, prio_registers, NULL); + +static struct intc_vect vectors_irq[] __initdata = { + INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), + INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660), +}; + +static DECLARE_INTC_DESC(intc_desc_irq, "sh7710-irq", vectors_irq, NULL, + priorities, NULL, prio_registers, NULL); + +static struct resource rtc_resources[] = { + [0] = { + .start = 0xa413fec0, + .end = 0xa413fec0 + 0x1e, + .flags = IORESOURCE_IO, + }, + [1] = { + .start = 20, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = 21, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = 22, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sh_rtc_platform_info rtc_info = { + .capabilities = RTC_CAP_4_DIGIT_YEAR, +}; + +static struct platform_device rtc_device = { + .name = "sh-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(rtc_resources), + .resource = rtc_resources, + .dev = { + .platform_data = &rtc_info, + }, +}; static struct plat_sci_port sci_platform_data[] = { { @@ -20,7 +152,7 @@ static struct plat_sci_port sci_platform .type = PORT_SCIF, .irqs = { 52, 53, 55, 54 }, }, { - .mapbase = 0xa4420000, + .mapbase = 0xa4410000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, .irqs = { 56, 57, 59, 58 }, @@ -40,6 +172,7 @@ static struct platform_device sci_device static struct platform_device *sh7710_devices[] __initdata = { &sci_device, + &rtc_device, }; static int __init sh7710_devices_setup(void) @@ -49,59 +182,16 @@ static int __init sh7710_devices_setup(v } __initcall(sh7710_devices_setup); -static struct ipr_data ipr_irq_table[] = { - /* IRQ, IPR-idx, shift, priority */ - { 16, 0, 12, 2 }, /* TMU0 TUNI*/ - { 17, 0, 8, 2 }, /* TMU1 TUNI */ - { 18, 0, 4, 2 }, /* TMU2 TUNI */ - { 27, 1, 12, 2 }, /* WDT ITI */ - { 20, 0, 0, 2 }, /* RTC ATI (alarm) */ - { 21, 0, 0, 2 }, /* RTC PRI (period) */ - { 22, 0, 0, 2 }, /* RTC CUI (carry) */ - { 48, 4, 12, 7 }, /* DMAC DMTE0 */ - { 49, 4, 12, 7 }, /* DMAC DMTE1 */ - { 50, 4, 12, 7 }, /* DMAC DMTE2 */ - { 51, 4, 12, 7 }, /* DMAC DMTE3 */ - { 52, 4, 8, 3 }, /* SCIF0 ERI */ - { 53, 4, 8, 3 }, /* SCIF0 RXI */ - { 54, 4, 8, 3 }, /* SCIF0 BRI */ - { 55, 4, 8, 3 }, /* SCIF0 TXI */ - { 56, 4, 4, 3 }, /* SCIF1 ERI */ - { 57, 4, 4, 3 }, /* SCIF1 RXI */ - { 58, 4, 4, 3 }, /* SCIF1 BRI */ - { 59, 4, 4, 3 }, /* SCIF1 TXI */ - { 76, 5, 8, 7 }, /* DMAC DMTE4 */ - { 77, 5, 8, 7 }, /* DMAC DMTE5 */ - { 80, 6, 12, 5 }, /* EDMAC EINT0 */ - { 81, 6, 8, 5 }, /* EDMAC EINT1 */ - { 82, 6, 4, 5 }, /* EDMAC EINT2 */ -}; - -static unsigned long ipr_offsets[] = { - 0xA414FEE2, /* 0: IPRA */ - 0xA414FEE4, /* 1: IPRB */ - 0xA4140016, /* 2: IPRC */ - 0xA4140018, /* 3: IPRD */ - 0xA414001A, /* 4: IPRE */ - 0xA4080000, /* 5: IPRF */ - 0xA4080002, /* 6: IPRG */ - 0xA4080004, /* 7: IPRH */ - 0xA4080006, /* 8: IPRI */ -}; - -static struct ipr_desc ipr_irq_desc = { - .ipr_offsets = ipr_offsets, - .nr_offsets = ARRAY_SIZE(ipr_offsets), - - .ipr_data = ipr_irq_table, - .nr_irqs = ARRAY_SIZE(ipr_irq_table), - - .chip = { - .name = "IPR-sh7710", - }, -}; +void __init plat_irq_setup_pins(int mode) +{ + if (mode == IRQ_MODE_IRQ) { + register_intc_controller(&intc_desc_irq); + return; + } + BUG(); +} void __init plat_irq_setup(void) { - register_ipr_controller(&ipr_irq_desc); + register_intc_controller(&intc_desc); } diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c new file mode 100644 index 0000000..a0929b8 --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c @@ -0,0 +1,210 @@ +/* + * SH7720 Setup + * + * Copyright (C) 2007 Markus Brunner, Mark Jonas + * + * Based on arch/sh/kernel/cpu/sh4/setup-sh7750.c: + * + * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2006 Jamie Lenehan + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include + +#define INTC_ICR1 0xA4140010UL +#define INTC_ICR_IRLM 0x4000 +#define INTC_ICR_IRQ (~INTC_ICR_IRLM) + +static struct resource rtc_resources[] = { + [0] = { + .start = 0xa413fec0, + .end = 0xa413fec0 + 0x28 - 1, + .flags = IORESOURCE_IO, + }, + [1] = { + /* Period IRQ */ + .start = 21, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* Carry IRQ */ + .start = 22, + .flags = IORESOURCE_IRQ, + }, + [3] = { + /* Alarm IRQ */ + .start = 20, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sh_rtc_platform_info rtc_info = { + .capabilities = RTC_CAP_4_DIGIT_YEAR, +}; + +static struct platform_device rtc_device = { + .name = "sh-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(rtc_resources), + .resource = rtc_resources, + .dev = { + .platform_data = &rtc_info, + }, +}; + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xa4430000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 80, 80, 80, 80 }, + }, { + .mapbase = 0xa4438000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 81, 81, 81, 81 }, + }, { + + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *sh7720_devices[] __initdata = { + &rtc_device, + &sci_device, +}; + +static int __init sh7720_devices_setup(void) +{ + return platform_add_devices(sh7720_devices, + ARRAY_SIZE(sh7720_devices)); +} +__initcall(sh7720_devices_setup); + +enum { + UNUSED = 0, + + /* interrupt sources */ + TMU0, TMU1, TMU2, RTC_ATI, RTC_PRI, RTC_CUI, + WDT, REF_RCMI, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND, + IRQ0, IRQ1, IRQ2, IRQ3, + USBF_SPD, TMU_SUNI, IRQ5, IRQ4, + DMAC1_DEI0, DMAC1_DEI1, DMAC1_DEI2, DMAC1_DEI3, LCDC, SSL, + ADC, DMAC2_DEI4, DMAC2_DEI5, USBFI0, USBFI1, CMT, + SCIF0, SCIF1, + PINT07, PINT815, TPU0, TPU1, TPU2, TPU3, IIC, + SIOF0, SIOF1, MMCI0, MMCI1, MMCI2, MMCI3, PCC, + USBHI, AFEIF, + H_UDI, + /* interrupt groups */ + TMU, RTC, SIM, DMAC1, USBFI, DMAC2, USB, TPU, MMC, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), + INTC_VECT(TMU2, 0x440), INTC_VECT(RTC_ATI, 0x480), + INTC_VECT(RTC_PRI, 0x4a0), INTC_VECT(RTC_CUI, 0x4c0), + INTC_VECT(SIM_ERI, 0x4e0), INTC_VECT(SIM_RXI, 0x500), + INTC_VECT(SIM_TXI, 0x520), INTC_VECT(SIM_TEND, 0x540), + INTC_VECT(WDT, 0x560), INTC_VECT(REF_RCMI, 0x580), + /* H_UDI cannot be masked */ INTC_VECT(TMU_SUNI, 0x6c0), + INTC_VECT(USBF_SPD, 0x6e0), INTC_VECT(DMAC1_DEI0, 0x800), + INTC_VECT(DMAC1_DEI1, 0x820), INTC_VECT(DMAC1_DEI2, 0x840), + INTC_VECT(DMAC1_DEI3, 0x860), INTC_VECT(LCDC, 0x900), + INTC_VECT(SSL, 0x980), INTC_VECT(USBFI0, 0xa20), + INTC_VECT(USBFI1, 0xa40), INTC_VECT(USBHI, 0xa60), + INTC_VECT(DMAC2_DEI4, 0xb80), INTC_VECT(DMAC2_DEI5, 0xba0), + INTC_VECT(ADC, 0xbe0), INTC_VECT(SCIF0, 0xc00), + INTC_VECT(SCIF1, 0xc20), INTC_VECT(PINT07, 0xc80), + INTC_VECT(PINT815, 0xca0), INTC_VECT(SIOF0, 0xd00), + INTC_VECT(SIOF1, 0xd20), INTC_VECT(TPU0, 0xd80), + INTC_VECT(TPU1, 0xda0), INTC_VECT(TPU2, 0xdc0), + INTC_VECT(TPU3, 0xde0), INTC_VECT(IIC, 0xe00), + INTC_VECT(MMCI0, 0xe80), INTC_VECT(MMCI1, 0xea0), + INTC_VECT(MMCI2, 0xec0), INTC_VECT(MMCI3, 0xee0), + INTC_VECT(CMT, 0xf00), INTC_VECT(PCC, 0xf60), + INTC_VECT(AFEIF, 0xfe0), +}; + +static struct intc_group groups[] __initdata = { + INTC_GROUP(TMU, TMU0, TMU1, TMU2), + INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), + INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND), + INTC_GROUP(DMAC1, DMAC1_DEI0, DMAC1_DEI1, DMAC1_DEI2, DMAC1_DEI3), + INTC_GROUP(USBFI, USBFI0, USBFI1), + INTC_GROUP(DMAC2, DMAC2_DEI4, DMAC2_DEI5), + INTC_GROUP(TPU, TPU0, TPU1, TPU2, TPU3), + INTC_GROUP(MMC, MMCI0, MMCI1, MMCI2, MMCI3), +}; + +static struct intc_prio priorities[] __initdata = { + INTC_PRIO(SCIF0, 2), + INTC_PRIO(SCIF1, 2), + INTC_PRIO(DMAC1, 1), + INTC_PRIO(DMAC2, 1), + INTC_PRIO(RTC, 2), + INTC_PRIO(TMU, 2), + INTC_PRIO(TPU, 2), +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xA414FEE2UL, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, + { 0xA414FEE4UL, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, SIM, 0 } }, + { 0xA4140016UL, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } }, + { 0xA4140018UL, 0, 16, 4, /* IPRD */ { USBF_SPD, TMU_SUNI, IRQ5, IRQ4 } }, + { 0xA414001AUL, 0, 16, 4, /* IPRE */ { DMAC1, 0, LCDC, SSL } }, + { 0xA4080000UL, 0, 16, 4, /* IPRF */ { ADC, DMAC2, USBFI, CMT } }, + { 0xA4080002UL, 0, 16, 4, /* IPRG */ { SCIF0, SCIF1, 0, 0 } }, + { 0xA4080004UL, 0, 16, 4, /* IPRH */ { PINT07, PINT815, TPU, IIC } }, + { 0xA4080006UL, 0, 16, 4, /* IPRI */ { SIOF0, SIOF1, MMC, PCC } }, + { 0xA4080008UL, 0, 16, 4, /* IPRJ */ { 0, USBHI, 0, AFEIF } }, +}; + +static DECLARE_INTC_DESC(intc_desc, "sh7720", vectors, groups, + priorities, NULL, prio_registers, NULL); + +static struct intc_sense_reg sense_registers[] __initdata = { + { INTC_ICR1, 16, 2, { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } }, +}; + +static struct intc_vect vectors_irq[] __initdata = { + INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), + INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660), + INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0), +}; + +static DECLARE_INTC_DESC(intc_irq_desc, "sh7720-irq", vectors_irq, + NULL, priorities, NULL, prio_registers, sense_registers); + +void __init plat_irq_setup_pins(int mode) +{ + switch (mode) { + case IRQ_MODE_IRQ: + ctrl_outw(ctrl_inw(INTC_ICR1) & INTC_ICR_IRQ, INTC_ICR1); + register_intc_controller(&intc_irq_desc); + break; + default: + BUG(); + } +} + +void __init plat_irq_setup(void) +{ + register_intc_controller(&intc_desc); +} diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index f2286de..523f68a 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -104,7 +104,7 @@ enum { DMAC, PCIC1, TMU2, RTC, SCI1, SCIF, REF, }; -static struct intc_vect vectors[] = { +static struct intc_vect vectors[] __initdata = { INTC_VECT(HUDI, 0x600), INTC_VECT(GPIOI, 0x620), INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460), @@ -118,7 +118,7 @@ static struct intc_vect vectors[] = { INTC_VECT(REF_RCMI, 0x580), INTC_VECT(REF_ROVI, 0x5a0), }; -static struct intc_group groups[] = { +static struct intc_group groups[] __initdata = { INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI), INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), INTC_GROUP(SCI1, SCI1_ERI, SCI1_RXI, SCI1_TXI, SCI1_TEI), @@ -126,20 +126,20 @@ static struct intc_group groups[] = { INTC_GROUP(REF, REF_RCMI, REF_ROVI), }; -static struct intc_prio priorities[] = { +static struct intc_prio priorities[] __initdata = { INTC_PRIO(SCIF, 3), INTC_PRIO(SCI1, 3), INTC_PRIO(DMAC, 7), }; -static struct intc_prio_reg prio_registers[] = { - { 0xffd00004, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, - { 0xffd00008, 16, 4, /* IPRB */ { WDT, REF, SCI1, 0 } }, - { 0xffd0000c, 16, 4, /* IPRC */ { GPIOI, DMAC, SCIF, HUDI } }, - { 0xffd00010, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } }, - { 0xfe080000, 32, 4, /* INTPRI00 */ { 0, 0, 0, 0, - TMU4, TMU3, - PCIC1, PCIC0_PCISERR } }, +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xffd00004, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, + { 0xffd00008, 0, 16, 4, /* IPRB */ { WDT, REF, SCI1, 0 } }, + { 0xffd0000c, 0, 16, 4, /* IPRC */ { GPIOI, DMAC, SCIF, HUDI } }, + { 0xffd00010, 0, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } }, + { 0xfe080000, 0, 32, 4, /* INTPRI00 */ { 0, 0, 0, 0, + TMU4, TMU3, + PCIC1, PCIC0_PCISERR } }, }; static DECLARE_INTC_DESC(intc_desc, "sh7750", vectors, groups, @@ -150,13 +150,13 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7750) | defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ defined(CONFIG_CPU_SUBTYPE_SH7751) || \ defined(CONFIG_CPU_SUBTYPE_SH7091) -static struct intc_vect vectors_dma4[] = { +static struct intc_vect vectors_dma4[] __initdata = { INTC_VECT(DMAC_DMTE0, 0x640), INTC_VECT(DMAC_DMTE1, 0x660), INTC_VECT(DMAC_DMTE2, 0x680), INTC_VECT(DMAC_DMTE3, 0x6a0), INTC_VECT(DMAC_DMAE, 0x6c0), }; -static struct intc_group groups_dma4[] = { +static struct intc_group groups_dma4[] __initdata = { INTC_GROUP(DMAC, DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2, DMAC_DMTE3, DMAC_DMAE), }; @@ -168,7 +168,7 @@ #endif /* SH7750R and SH7751R both have 8-channel DMA controllers */ #if defined(CONFIG_CPU_SUBTYPE_SH7750R) || defined(CONFIG_CPU_SUBTYPE_SH7751R) -static struct intc_vect vectors_dma8[] = { +static struct intc_vect vectors_dma8[] __initdata = { INTC_VECT(DMAC_DMTE0, 0x640), INTC_VECT(DMAC_DMTE1, 0x660), INTC_VECT(DMAC_DMTE2, 0x680), INTC_VECT(DMAC_DMTE3, 0x6a0), INTC_VECT(DMAC_DMTE4, 0x780), INTC_VECT(DMAC_DMTE5, 0x7a0), @@ -176,7 +176,7 @@ static struct intc_vect vectors_dma8[] = INTC_VECT(DMAC_DMAE, 0x6c0), }; -static struct intc_group groups_dma8[] = { +static struct intc_group groups_dma8[] __initdata = { INTC_GROUP(DMAC, DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2, DMAC_DMTE3, DMAC_DMTE4, DMAC_DMTE5, DMAC_DMTE6, DMAC_DMTE7, DMAC_DMAE), @@ -191,11 +191,11 @@ #endif #if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ defined(CONFIG_CPU_SUBTYPE_SH7751) || \ defined(CONFIG_CPU_SUBTYPE_SH7751R) -static struct intc_vect vectors_tmu34[] = { +static struct intc_vect vectors_tmu34[] __initdata = { INTC_VECT(TMU3, 0xb00), INTC_VECT(TMU4, 0xb80), }; -static struct intc_mask_reg mask_registers[] = { +static struct intc_mask_reg mask_registers[] __initdata = { { 0xfe080040, 0xfe080060, 32, /* INTMSK00 / INTMSKCLR00 */ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, TMU4, TMU3, @@ -210,7 +210,7 @@ static DECLARE_INTC_DESC(intc_desc_tmu34 #endif /* SH7750S, SH7750R, SH7751 and SH7751R all have IRLM priority registers */ -static struct intc_vect vectors_irlm[] = { +static struct intc_vect vectors_irlm[] __initdata = { INTC_VECT(IRL0, 0x240), INTC_VECT(IRL1, 0x2a0), INTC_VECT(IRL2, 0x300), INTC_VECT(IRL3, 0x360), }; @@ -220,14 +220,14 @@ static DECLARE_INTC_DESC(intc_desc_irlm, /* SH7751 and SH7751R both have PCI */ #if defined(CONFIG_CPU_SUBTYPE_SH7751) || defined(CONFIG_CPU_SUBTYPE_SH7751R) -static struct intc_vect vectors_pci[] = { +static struct intc_vect vectors_pci[] __initdata = { INTC_VECT(PCIC0_PCISERR, 0xa00), INTC_VECT(PCIC1_PCIERR, 0xae0), INTC_VECT(PCIC1_PCIPWDWN, 0xac0), INTC_VECT(PCIC1_PCIPWON, 0xaa0), INTC_VECT(PCIC1_PCIDMA0, 0xa80), INTC_VECT(PCIC1_PCIDMA1, 0xa60), INTC_VECT(PCIC1_PCIDMA2, 0xa40), INTC_VECT(PCIC1_PCIDMA3, 0xa20), }; -static struct intc_group groups_pci[] = { +static struct intc_group groups_pci[] __initdata = { INTC_GROUP(PCIC1, PCIC1_PCIERR, PCIC1_PCIPWDWN, PCIC1_PCIPWON, PCIC1_PCIDMA0, PCIC1_PCIDMA1, PCIC1_PCIDMA2, PCIC1_PCIDMA3), }; @@ -282,13 +282,19 @@ #endif #define INTC_ICR 0xffd00000UL #define INTC_ICR_IRLM (1<<7) -/* enable individual interrupt mode for external interupts */ -void __init ipr_irq_enable_irlm(void) +void __init plat_irq_setup_pins(int mode) { #if defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7091) BUG(); /* impossible to mask interrupts on SH7750 and SH7091 */ + return; #endif - register_intc_controller(&intc_desc_irlm); - ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); + switch (mode) { + case IRQ_MODE_IRQ: /* individual interrupt mode for IRL3-0 */ + ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); + register_intc_controller(&intc_desc_irlm); + break; + default: + BUG(); + } } diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c index 47fa270..7a898cb 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c @@ -12,6 +12,136 @@ #include #include #include +enum { + UNUSED = 0, + + /* interrupt sources */ + IRL0, IRL1, IRL2, IRL3, + HUDI, GPIOI, + DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2, DMAC_DMTE3, + DMAC_DMTE4, DMAC_DMTE5, DMAC_DMTE6, DMAC_DMTE7, + DMAC_DMAE, + IRQ4, IRQ5, IRQ6, IRQ7, + HCAN20, HCAN21, + SSI0, SSI1, + HAC0, HAC1, + I2C0, I2C1, + USB, LCDC, + DMABRG0, DMABRG1, DMABRG2, + SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, + SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI, + SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI, + SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI, + HSPI, + MMCIF0, MMCIF1, MMCIF2, MMCIF3, + MFI, ADC, CMT, + TMU0, TMU1, TMU2_TUNI, TMU2_TICPI, + WDT, + REF_RCMI, REF_ROVI, + + /* interrupt groups */ + DMAC, DMABRG, SCIF0, SCIF1, SCIF2, SIM, MMCIF, TMU2, REF, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_VECT(HUDI, 0x600), INTC_VECT(GPIOI, 0x620), + INTC_VECT(DMAC_DMTE0, 0x640), INTC_VECT(DMAC_DMTE1, 0x660), + INTC_VECT(DMAC_DMTE2, 0x680), INTC_VECT(DMAC_DMTE3, 0x6a0), + INTC_VECT(DMAC_DMTE4, 0x780), INTC_VECT(DMAC_DMTE5, 0x7a0), + INTC_VECT(DMAC_DMTE6, 0x7c0), INTC_VECT(DMAC_DMTE7, 0x7e0), + INTC_VECT(DMAC_DMAE, 0x6c0), + INTC_VECT(IRQ4, 0x800), INTC_VECT(IRQ5, 0x820), + INTC_VECT(IRQ6, 0x840), INTC_VECT(IRQ6, 0x860), + INTC_VECT(HCAN20, 0x900), INTC_VECT(HCAN21, 0x920), + INTC_VECT(SSI0, 0x940), INTC_VECT(SSI1, 0x960), + INTC_VECT(HAC0, 0x980), INTC_VECT(HAC1, 0x9a0), + INTC_VECT(I2C0, 0x9c0), INTC_VECT(I2C1, 0x9e0), + INTC_VECT(USB, 0xa00), INTC_VECT(LCDC, 0xa20), + INTC_VECT(DMABRG0, 0xa80), INTC_VECT(DMABRG1, 0xaa0), + INTC_VECT(DMABRG2, 0xac0), + INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0), + INTC_VECT(SCIF0_BRI, 0x8c0), INTC_VECT(SCIF0_TXI, 0x8e0), + INTC_VECT(SCIF1_ERI, 0xb00), INTC_VECT(SCIF1_RXI, 0xb20), + INTC_VECT(SCIF1_BRI, 0xb40), INTC_VECT(SCIF1_TXI, 0xb60), + INTC_VECT(SCIF2_ERI, 0xb80), INTC_VECT(SCIF2_RXI, 0xba0), + INTC_VECT(SCIF2_BRI, 0xbc0), INTC_VECT(SCIF2_TXI, 0xbe0), + INTC_VECT(SIM_ERI, 0xc00), INTC_VECT(SIM_RXI, 0xc20), + INTC_VECT(SIM_TXI, 0xc40), INTC_VECT(SIM_TEI, 0xc60), + INTC_VECT(HSPI, 0xc80), + INTC_VECT(MMCIF0, 0xd00), INTC_VECT(MMCIF1, 0xd20), + INTC_VECT(MMCIF2, 0xd40), INTC_VECT(MMCIF3, 0xd60), + INTC_VECT(MFI, 0xe80), /* 0xf80 according to data sheet */ + INTC_VECT(ADC, 0xf80), INTC_VECT(CMT, 0xfa0), + INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), + INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460), + INTC_VECT(WDT, 0x560), + INTC_VECT(REF_RCMI, 0x580), INTC_VECT(REF_ROVI, 0x5a0), +}; + +static struct intc_group groups[] __initdata = { + INTC_GROUP(DMAC, DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2, + DMAC_DMTE3, DMAC_DMTE4, DMAC_DMTE5, + DMAC_DMTE6, DMAC_DMTE7, DMAC_DMAE), + INTC_GROUP(DMABRG, DMABRG0, DMABRG1, DMABRG2), + INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), + INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI), + INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI), + INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI), + INTC_GROUP(MMCIF, MMCIF0, MMCIF1, MMCIF2, MMCIF3), + INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI), + INTC_GROUP(REF, REF_RCMI, REF_ROVI), +}; + +static struct intc_prio priorities[] __initdata = { + INTC_PRIO(SCIF0, 3), + INTC_PRIO(SCIF1, 3), + INTC_PRIO(SCIF2, 3), + INTC_PRIO(SIM, 3), + INTC_PRIO(DMAC, 7), + INTC_PRIO(DMABRG, 13), +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xfe080040, 0xfe080060, 32, /* INTMSK00 / INTMSKCLR00 */ + { IRQ4, IRQ5, IRQ6, IRQ7, 0, 0, HCAN20, HCAN21, + SSI0, SSI1, HAC0, HAC1, I2C0, I2C1, USB, LCDC, + 0, DMABRG0, DMABRG1, DMABRG2, + SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, + SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI, + SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI, } }, + { 0xfe080044, 0xfe080064, 32, /* INTMSK04 / INTMSKCLR04 */ + { 0, 0, 0, 0, 0, 0, 0, 0, + SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI, + HSPI, MMCIF0, MMCIF1, MMCIF2, + MMCIF3, 0, 0, 0, 0, 0, 0, 0, + 0, MFI, 0, 0, 0, 0, ADC, CMT, } }, +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xffd00004, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } }, + { 0xffd00008, 0, 16, 4, /* IPRB */ { WDT, REF, 0, 0 } }, + { 0xffd0000c, 0, 16, 4, /* IPRC */ { GPIOI, DMAC, 0, HUDI } }, + { 0xffd00010, 0, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } }, + { 0xfe080000, 0, 32, 4, /* INTPRI00 */ { IRQ4, IRQ5, IRQ6, IRQ7 } }, + { 0xfe080004, 0, 32, 4, /* INTPRI04 */ { HCAN20, HCAN21, SSI0, SSI1, + HAC0, HAC1, I2C0, I2C1 } }, + { 0xfe080008, 0, 32, 4, /* INTPRI08 */ { USB, LCDC, DMABRG, SCIF0, + SCIF1, SCIF2, SIM, HSPI } }, + { 0xfe08000c, 0, 32, 4, /* INTPRI0C */ { 0, 0, MMCIF, 0, + MFI, 0, ADC, CMT } }, +}; + +static DECLARE_INTC_DESC(intc_desc, "sh7760", vectors, groups, + priorities, mask_registers, prio_registers, NULL); + +static struct intc_vect vectors_irq[] __initdata = { + INTC_VECT(IRL0, 0x240), INTC_VECT(IRL1, 0x2a0), + INTC_VECT(IRL2, 0x300), INTC_VECT(IRL3, 0x360), +}; + +static DECLARE_INTC_DESC(intc_desc_irq, "sh7760-irq", vectors_irq, groups, + priorities, mask_registers, prio_registers, NULL); + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xfe600000, @@ -29,6 +159,11 @@ static struct plat_sci_port sci_platform .type = PORT_SCIF, .irqs = { 76, 77, 79, 78 }, }, { + .mapbase = 0xfe480000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCI, + .irqs = { 80, 81, 82, 0 }, + }, { .flags = 0, } }; @@ -52,114 +187,18 @@ static int __init sh7760_devices_setup(v } __initcall(sh7760_devices_setup); -static struct intc2_data intc2_irq_table[] = { - {48, 0, 28, 0, 31, 3}, /* IRQ 4 */ - {49, 0, 24, 0, 30, 3}, /* IRQ 3 */ - {50, 0, 20, 0, 29, 3}, /* IRQ 2 */ - {51, 0, 16, 0, 28, 3}, /* IRQ 1 */ - {56, 4, 28, 0, 25, 3}, /* HCAN2_CHAN0 */ - {57, 4, 24, 0, 24, 3}, /* HCAN2_CHAN1 */ - {58, 4, 20, 0, 23, 3}, /* I2S_CHAN0 */ - {59, 4, 16, 0, 22, 3}, /* I2S_CHAN1 */ - {60, 4, 12, 0, 21, 3}, /* AC97_CHAN0 */ - {61, 4, 8, 0, 20, 3}, /* AC97_CHAN1 */ - {62, 4, 4, 0, 19, 3}, /* I2C_CHAN0 */ - {63, 4, 0, 0, 18, 3}, /* I2C_CHAN1 */ - {52, 8, 16, 0, 11, 3}, /* SCIF0_ERI_IRQ */ - {53, 8, 16, 0, 10, 3}, /* SCIF0_RXI_IRQ */ - {54, 8, 16, 0, 9, 3}, /* SCIF0_BRI_IRQ */ - {55, 8, 16, 0, 8, 3}, /* SCIF0_TXI_IRQ */ - {64, 8, 28, 0, 17, 3}, /* USBHI_IRQ */ - {65, 8, 24, 0, 16, 3}, /* LCDC */ - {68, 8, 20, 0, 14, 13}, /* DMABRGI0_IRQ */ - {69, 8, 20, 0, 13, 13}, /* DMABRGI1_IRQ */ - {70, 8, 20, 0, 12, 13}, /* DMABRGI2_IRQ */ - {72, 8, 12, 0, 7, 3}, /* SCIF1_ERI_IRQ */ - {73, 8, 12, 0, 6, 3}, /* SCIF1_RXI_IRQ */ - {74, 8, 12, 0, 5, 3}, /* SCIF1_BRI_IRQ */ - {75, 8, 12, 0, 4, 3}, /* SCIF1_TXI_IRQ */ - {76, 8, 8, 0, 3, 3}, /* SCIF2_ERI_IRQ */ - {77, 8, 8, 0, 2, 3}, /* SCIF2_RXI_IRQ */ - {78, 8, 8, 0, 1, 3}, /* SCIF2_BRI_IRQ */ - {79, 8, 8, 0, 0, 3}, /* SCIF2_TXI_IRQ */ - {80, 8, 4, 4, 23, 3}, /* SIM_ERI */ - {81, 8, 4, 4, 22, 3}, /* SIM_RXI */ - {82, 8, 4, 4, 21, 3}, /* SIM_TXI */ - {83, 8, 4, 4, 20, 3}, /* SIM_TEI */ - {84, 8, 0, 4, 19, 3}, /* HSPII */ - {88, 12, 20, 4, 18, 3}, /* MMCI0 */ - {89, 12, 20, 4, 17, 3}, /* MMCI1 */ - {90, 12, 20, 4, 16, 3}, /* MMCI2 */ - {91, 12, 20, 4, 15, 3}, /* MMCI3 */ - {92, 12, 12, 4, 6, 3}, /* MFI */ - {108,12, 4, 4, 1, 3}, /* ADC */ - {109,12, 0, 4, 0, 3}, /* CMTI */ -}; - -static struct intc2_desc intc2_irq_desc __read_mostly = { - .prio_base = 0xfe080000, - .msk_base = 0xfe080040, - .mskclr_base = 0xfe080060, - - .intc2_data = intc2_irq_table, - .nr_irqs = ARRAY_SIZE(intc2_irq_table), - - .chip = { - .name = "INTC2-sh7760", - }, -}; - -static struct ipr_data ipr_irq_table[] = { - /* IRQ, IPR-idx, shift, priority */ - { 16, 0, 12, 2 }, /* TMU0 TUNI*/ - { 17, 0, 8, 2 }, /* TMU1 TUNI */ - { 18, 0, 4, 2 }, /* TMU2 TUNI */ - { 19, 0, 4, 2 }, /* TMU2 TIPCI */ - { 27, 1, 12, 2 }, /* WDT ITI */ - { 28, 1, 8, 2 }, /* REF RCMI */ - { 29, 1, 8, 2 }, /* REF ROVI */ - { 32, 2, 0, 7 }, /* HUDI */ - { 33, 2, 12, 7 }, /* GPIOI */ - { 34, 2, 8, 7 }, /* DMAC DMTE0 */ - { 35, 2, 8, 7 }, /* DMAC DMTE1 */ - { 36, 2, 8, 7 }, /* DMAC DMTE2 */ - { 37, 2, 8, 7 }, /* DMAC DMTE3 */ - { 38, 2, 8, 7 }, /* DMAC DMAE */ - { 44, 2, 8, 7 }, /* DMAC DMTE4 */ - { 45, 2, 8, 7 }, /* DMAC DMTE5 */ - { 46, 2, 8, 7 }, /* DMAC DMTE6 */ - { 47, 2, 8, 7 }, /* DMAC DMTE7 */ -/* these here are only valid if INTC_ICR bit 7 is set to 1! - * XXX: maybe CONFIG_SH_IRLMODE symbol? SH7751 could use it too */ -#if 0 - { 2, 3, 12, 3 }, /* IRL0 */ - { 5, 3, 8, 3 }, /* IRL1 */ - { 8, 3, 4, 3 }, /* IRL2 */ - { 11, 3, 0, 3 }, /* IRL3 */ -#endif -}; - -static unsigned long ipr_offsets[] = { - 0xffd00004UL, /* 0: IPRA */ - 0xffd00008UL, /* 1: IPRB */ - 0xffd0000cUL, /* 2: IPRC */ - 0xffd00010UL, /* 3: IPRD */ -}; - -static struct ipr_desc ipr_irq_desc = { - .ipr_offsets = ipr_offsets, - .nr_offsets = ARRAY_SIZE(ipr_offsets), - - .ipr_data = ipr_irq_table, - .nr_irqs = ARRAY_SIZE(ipr_irq_table), - - .chip = { - .name = "IPR-sh7760", - }, -}; +void __init plat_irq_setup_pins(int mode) +{ + switch (mode) { + case IRQ_MODE_IRQ: + register_intc_controller(&intc_desc_irq); + break; + default: + BUG(); + } +} void __init plat_irq_setup(void) { - register_intc2_controller(&intc2_irq_desc); - register_ipr_controller(&ipr_irq_desc); + register_intc_controller(&intc_desc); } diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c index c21512c..b22a78c 100644 --- a/arch/sh/kernel/cpu/sh4/sq.c +++ b/arch/sh/kernel/cpu/sh4/sq.c @@ -58,11 +58,11 @@ do { \ */ void sq_flush_range(unsigned long start, unsigned int len) { - volatile unsigned long *sq = (unsigned long *)start; + unsigned long *sq = (unsigned long *)start; /* Flush the queues */ for (len >>= 5; len--; sq += 8) - prefetchw((void *)sq); + prefetchw(sq); /* Wait for completion */ store_queue_barrier(); diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile index e6a1fb5..2453987 100644 --- a/arch/sh/kernel/cpu/sh4a/Makefile +++ b/arch/sh/kernel/cpu/sh4a/Makefile @@ -10,6 +10,9 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setu obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o +# SMP setup +smp-$(CONFIG_CPU_SUBTYPE_SHX3) := smp-shx3.o + # Primary on-chip clocks (common) clock-$(CONFIG_CPU_SUBTYPE_SH7770) := clock-sh7770.o clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o @@ -18,4 +21,5 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7343) := cl clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o clock-$(CONFIG_CPU_SUBTYPE_SHX3) := clock-shx3.o -obj-y += $(clock-y) +obj-y += $(clock-y) +obj-$(CONFIG_SMP) += $(smp-y) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index 91d61cf..c0a3f07 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -41,3 +41,7 @@ static int __init sh7343_devices_setup(v ARRAY_SIZE(sh7343_devices)); } __initcall(sh7343_devices_setup); + +void __init plat_irq_setup(void) +{ +} diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 25b913e..55f6610 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -84,7 +84,7 @@ enum { SIM, RTC, DMAC0123, VIOVOU, USB, DMAC45, FLCTL, I2C, SDHI, }; -static struct intc_vect vectors[] = { +static struct intc_vect vectors[] __initdata = { INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660), INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0), @@ -117,7 +117,7 @@ static struct intc_vect vectors[] = { INTC_VECT(JPU, 0x560), INTC_VECT(LCDC, 0x580), }; -static struct intc_group groups[] = { +static struct intc_group groups[] __initdata = { INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI), INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3), @@ -130,7 +130,7 @@ static struct intc_group groups[] = { INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2, SDHI3), }; -static struct intc_prio priorities[] = { +static struct intc_prio priorities[] __initdata = { INTC_PRIO(SCIF0, 3), INTC_PRIO(SCIF1, 3), INTC_PRIO(SCIF2, 3), @@ -138,7 +138,7 @@ static struct intc_prio priorities[] = { INTC_PRIO(TMU1, 2), }; -static struct intc_mask_reg mask_registers[] = { +static struct intc_mask_reg mask_registers[] __initdata = { { 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */ { } }, { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */ @@ -168,24 +168,24 @@ static struct intc_mask_reg mask_registe { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static struct intc_prio_reg prio_registers[] = { - { 0xa4080000, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, IRDA } }, - { 0xa4080004, 16, 4, /* IPRB */ { JPU, LCDC, SIM } }, - { 0xa4080008, 16, 4, /* IPRC */ { } }, - { 0xa408000c, 16, 4, /* IPRD */ { } }, - { 0xa4080010, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, 0, VPU } }, - { 0xa4080014, 16, 4, /* IPRF */ { KEYSC, DMAC45, USB, CMT } }, - { 0xa4080018, 16, 4, /* IPRG */ { SCIF0, SCIF1, SCIF2 } }, - { 0xa408001c, 16, 4, /* IPRH */ { SIOF0, SIOF1, FLCTL, I2C } }, - { 0xa4080020, 16, 4, /* IPRI */ { SIO, 0, TSIF, RTC } }, - { 0xa4080024, 16, 4, /* IPRJ */ { 0, 0, SIU } }, - { 0xa4080028, 16, 4, /* IPRK */ { 0, 0, 0, SDHI } }, - { 0xa408002c, 16, 4, /* IPRL */ { TWODG, 0, TPU } }, - { 0xa4140010, 32, 4, /* INTPRI00 */ +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, IRDA } }, + { 0xa4080004, 0, 16, 4, /* IPRB */ { JPU, LCDC, SIM } }, + { 0xa4080008, 0, 16, 4, /* IPRC */ { } }, + { 0xa408000c, 0, 16, 4, /* IPRD */ { } }, + { 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, 0, VPU } }, + { 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC, DMAC45, USB, CMT } }, + { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF0, SCIF1, SCIF2 } }, + { 0xa408001c, 0, 16, 4, /* IPRH */ { SIOF0, SIOF1, FLCTL, I2C } }, + { 0xa4080020, 0, 16, 4, /* IPRI */ { SIO, 0, TSIF, RTC } }, + { 0xa4080024, 0, 16, 4, /* IPRJ */ { 0, 0, SIU } }, + { 0xa4080028, 0, 16, 4, /* IPRK */ { 0, 0, 0, SDHI } }, + { 0xa408002c, 0, 16, 4, /* IPRL */ { TWODG, 0, TPU } }, + { 0xa4140010, 0, 32, 4, /* INTPRI00 */ { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static struct intc_sense_reg sense_registers[] = { +static struct intc_sense_reg sense_registers[] __initdata = { { 0xa414001c, 16, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, }; diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c index 6a04cc5..32f4f59 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c @@ -51,3 +51,7 @@ static int __init sh7770_devices_setup(v ARRAY_SIZE(sh7770_devices)); } __initcall(sh7770_devices_setup); + +void __init plat_irq_setup(void) +{ +} diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c index a4127ec..e8fd33f 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c @@ -10,6 +10,7 @@ #include #include #include +#include #include static struct resource rtc_resources[] = { @@ -114,7 +115,7 @@ enum { PCIC5, SCIF1, MMCIF, TMU345, FLCTL, GPIO, }; -static struct intc_vect vectors[] = { +static struct intc_vect vectors[] __initdata = { INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0), INTC_VECT(RTC_CUI, 0x4c0), INTC_VECT(WDT, 0x560), @@ -150,7 +151,7 @@ static struct intc_vect vectors[] = { INTC_VECT(GPIOI2, 0xfc0), INTC_VECT(GPIOI3, 0xfe0), }; -static struct intc_group groups[] = { +static struct intc_group groups[] __initdata = { INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI), INTC_GROUP(DMAC0, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, @@ -167,12 +168,12 @@ static struct intc_group groups[] = { INTC_GROUP(GPIO, GPIOI0, GPIOI1, GPIOI2, GPIOI3), }; -static struct intc_prio priorities[] = { +static struct intc_prio priorities[] __initdata = { INTC_PRIO(SCIF0, 3), INTC_PRIO(SCIF1, 3), }; -static struct intc_mask_reg mask_registers[] = { +static struct intc_mask_reg mask_registers[] __initdata = { { 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */ { 0, 0, 0, 0, 0, 0, GPIO, FLCTL, SSI, MMCIF, HSPI, SIOF, PCIC5, PCIINTD, PCIINTC, PCIINTB, @@ -180,16 +181,18 @@ static struct intc_mask_reg mask_registe HUDI, 0, WDT, SCIF1, SCIF0, RTC, TMU345, TMU012 } }, }; -static struct intc_prio_reg prio_registers[] = { - { 0xffd40000, 32, 8, /* INT2PRI0 */ { TMU0, TMU1, TMU2, TMU2_TICPI } }, - { 0xffd40004, 32, 8, /* INT2PRI1 */ { TMU3, TMU4, TMU5, RTC } }, - { 0xffd40008, 32, 8, /* INT2PRI2 */ { SCIF0, SCIF1, WDT } }, - { 0xffd4000c, 32, 8, /* INT2PRI3 */ { HUDI, DMAC0, DMAC1 } }, - { 0xffd40010, 32, 8, /* INT2PRI4 */ { CMT, HAC, PCISERR, PCIINTA, } }, - { 0xffd40014, 32, 8, /* INT2PRI5 */ { PCIINTB, PCIINTC, - PCIINTD, PCIC5 } }, - { 0xffd40018, 32, 8, /* INT2PRI6 */ { SIOF, HSPI, MMCIF, SSI } }, - { 0xffd4001c, 32, 8, /* INT2PRI7 */ { FLCTL, GPIO } }, +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xffd40000, 0, 32, 8, /* INT2PRI0 */ { TMU0, TMU1, + TMU2, TMU2_TICPI } }, + { 0xffd40004, 0, 32, 8, /* INT2PRI1 */ { TMU3, TMU4, TMU5, RTC } }, + { 0xffd40008, 0, 32, 8, /* INT2PRI2 */ { SCIF0, SCIF1, WDT } }, + { 0xffd4000c, 0, 32, 8, /* INT2PRI3 */ { HUDI, DMAC0, DMAC1 } }, + { 0xffd40010, 0, 32, 8, /* INT2PRI4 */ { CMT, HAC, + PCISERR, PCIINTA, } }, + { 0xffd40014, 0, 32, 8, /* INT2PRI5 */ { PCIINTB, PCIINTC, + PCIINTD, PCIC5 } }, + { 0xffd40018, 0, 32, 8, /* INT2PRI6 */ { SIOF, HSPI, MMCIF, SSI } }, + { 0xffd4001c, 0, 32, 8, /* INT2PRI7 */ { FLCTL, GPIO } }, }; static DECLARE_INTC_DESC(intc_desc, "sh7780", vectors, groups, priorities, @@ -197,24 +200,24 @@ static DECLARE_INTC_DESC(intc_desc, "sh7 /* Support for external interrupt pins in IRQ mode */ -static struct intc_vect irq_vectors[] = { +static struct intc_vect irq_vectors[] __initdata = { INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280), INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300), INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380), INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200), }; -static struct intc_mask_reg irq_mask_registers[] = { +static struct intc_mask_reg irq_mask_registers[] __initdata = { { 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */ { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static struct intc_prio_reg irq_prio_registers[] = { - { 0xffd00010, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3, - IRQ4, IRQ5, IRQ6, IRQ7 } }, +static struct intc_prio_reg irq_prio_registers[] __initdata = { + { 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3, + IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static struct intc_sense_reg irq_sense_registers[] = { +static struct intc_sense_reg irq_sense_registers[] __initdata = { { 0xffd0001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, }; @@ -225,7 +228,7 @@ static DECLARE_INTC_DESC(intc_irq_desc, /* External interrupt pins in IRL mode */ -static struct intc_vect irl_vectors[] = { +static struct intc_vect irl_vectors[] __initdata = { INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220), INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260), INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0), @@ -236,16 +239,16 @@ static struct intc_vect irl_vectors[] = INTC_VECT(IRL_HHHL, 0x3c0), }; -static struct intc_mask_reg irl3210_mask_registers[] = { - { 0xffd00080, 0xffd00084, 32, /* INTMSK2 / INTMSKCLR2 */ +static struct intc_mask_reg irl3210_mask_registers[] __initdata = { + { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */ { IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH, IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH, IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH, IRL_HHLL, IRL_HHLH, IRL_HHHL, } }, }; -static struct intc_mask_reg irl7654_mask_registers[] = { - { 0xffd00080, 0xffd00084, 32, /* INTMSK2 / INTMSKCLR2 */ +static struct intc_mask_reg irl7654_mask_registers[] __initdata = { + { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH, IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH, @@ -259,8 +262,28 @@ static DECLARE_INTC_DESC(intc_irl7654_de static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7780-irl3210", irl_vectors, NULL, NULL, irl3210_mask_registers, NULL, NULL); +#define INTC_ICR0 0xffd00000 +#define INTC_INTMSK0 0xffd00044 +#define INTC_INTMSK1 0xffd00048 +#define INTC_INTMSK2 0xffd40080 +#define INTC_INTMSKCLR1 0xffd00068 +#define INTC_INTMSKCLR2 0xffd40084 + void __init plat_irq_setup(void) { + /* disable IRQ7-0 */ + ctrl_outl(0xff000000, INTC_INTMSK0); + + /* disable IRL3-0 + IRL7-4 */ + ctrl_outl(0xc0000000, INTC_INTMSK1); + ctrl_outl(0xfffefffe, INTC_INTMSK2); + + /* select IRL mode for IRL3-0 + IRL7-4 */ + ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0); + + /* disable holding function, ie enable "SH-4 Mode" */ + ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00200000, INTC_ICR0); + register_intc_controller(&intc_desc); } @@ -268,12 +291,28 @@ void __init plat_irq_setup_pins(int mode { switch (mode) { case IRQ_MODE_IRQ: + /* select IRQ mode for IRL3-0 + IRL7-4 */ + ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00c00000, INTC_ICR0); register_intc_controller(&intc_irq_desc); break; case IRQ_MODE_IRL7654: - register_intc_controller(&intc_irl7654_desc); + /* enable IRL7-4 but don't provide any masking */ + ctrl_outl(0x40000000, INTC_INTMSKCLR1); + ctrl_outl(0x0000fffe, INTC_INTMSKCLR2); break; case IRQ_MODE_IRL3210: + /* enable IRL0-3 but don't provide any masking */ + ctrl_outl(0x80000000, INTC_INTMSKCLR1); + ctrl_outl(0xfffe0000, INTC_INTMSKCLR2); + break; + case IRQ_MODE_IRL7654_MASK: + /* enable IRL7-4 and mask using cpu intc controller */ + ctrl_outl(0x40000000, INTC_INTMSKCLR1); + register_intc_controller(&intc_irl7654_desc); + break; + case IRQ_MODE_IRL3210_MASK: + /* enable IRL0-3 and mask using cpu intc controller */ + ctrl_outl(0x80000000, INTC_INTMSKCLR1); register_intc_controller(&intc_irl3210_desc); break; default: diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c index cf04756..267114d 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c @@ -10,6 +10,9 @@ #include #include #include +#include +#include +#include #include static struct plat_sci_port sci_platform_data[] = { @@ -72,46 +75,285 @@ static int __init sh7785_devices_setup(v } __initcall(sh7785_devices_setup); -static struct intc2_data intc2_irq_table[] = { - { 28, 0, 24, 0, 0, 2 }, /* TMU0 */ - - { 40, 8, 24, 0, 2, 3 }, /* SCIF0 ERI */ - { 41, 8, 24, 0, 2, 3 }, /* SCIF0 RXI */ - { 42, 8, 24, 0, 2, 3 }, /* SCIF0 BRI */ - { 43, 8, 24, 0, 2, 3 }, /* SCIF0 TXI */ - - { 44, 8, 16, 0, 3, 3 }, /* SCIF1 ERI */ - { 45, 8, 16, 0, 3, 3 }, /* SCIF1 RXI */ - { 46, 8, 16, 0, 3, 3 }, /* SCIF1 BRI */ - { 47, 8, 16, 0, 3, 3 }, /* SCIF1 TXI */ - - { 64, 0x14, 8, 0, 14, 2 }, /* PCIC0 */ - { 65, 0x14, 0, 0, 15, 2 }, /* PCIC1 */ - { 66, 0x18, 24, 0, 16, 2 }, /* PCIC2 */ - { 67, 0x18, 16, 0, 17, 2 }, /* PCIC3 */ - { 68, 0x18, 8, 0, 18, 2 }, /* PCIC4 */ - - { 60, 8, 8, 0, 4, 3 }, /* SCIF2 ERI, RXI, BRI, TXI */ - { 60, 8, 0, 0, 5, 3 }, /* SCIF3 ERI, RXI, BRI, TXI */ - { 60, 12, 24, 0, 6, 3 }, /* SCIF4 ERI, RXI, BRI, TXI */ - { 60, 12, 16, 0, 7, 3 }, /* SCIF5 ERI, RXI, BRI, TXI */ +enum { + UNUSED = 0, + + /* interrupt sources */ + + IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH, + IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH, + IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH, + IRL0_HHLL, IRL0_HHLH, IRL0_HHHL, + + IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH, + IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH, + IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH, + IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, + + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, + WDT, + TMU0, TMU1, TMU2, TMU2_TICPI, + HUDI, + DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3, + DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE, + SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, + SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI, + DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8, DMAC1_DMINT9, + DMAC1_DMINT10, DMAC1_DMINT11, DMAC1_DMAE, + HSPI, + SCIF2, SCIF3, SCIF4, SCIF5, + PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, + PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0, + SIOF, + MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY, + DU, + GDTA_GACLI, GDTA_GAMCI, GDTA_GAERI, + TMU3, TMU4, TMU5, + SSI0, SSI1, + HAC0, HAC1, + FLCTL_FLSTE, FLCTL_FLEND, FLCTL_FLTRQ0, FLCTL_FLTRQ1, + GPIOI0, GPIOI1, GPIOI2, GPIOI3, + + /* interrupt groups */ + + TMU012, DMAC0, SCIF0, SCIF1, DMAC1, + PCIC5, MMCIF, GDTA, TMU345, FLCTL, GPIO }; -static struct intc2_desc intc2_irq_desc __read_mostly = { - .prio_base = 0xffd40000, - .msk_base = 0xffd40038, - .mskclr_base = 0xffd4003c, +static struct intc_vect vectors[] __initdata = { + INTC_VECT(WDT, 0x560), + INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0), + INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0), + INTC_VECT(HUDI, 0x600), + INTC_VECT(DMAC0_DMINT0, 0x620), INTC_VECT(DMAC0_DMINT1, 0x640), + INTC_VECT(DMAC0_DMINT2, 0x660), INTC_VECT(DMAC0_DMINT3, 0x680), + INTC_VECT(DMAC0_DMINT4, 0x6a0), INTC_VECT(DMAC0_DMINT5, 0x6c0), + INTC_VECT(DMAC0_DMAE, 0x6e0), + INTC_VECT(SCIF0_ERI, 0x700), INTC_VECT(SCIF0_RXI, 0x720), + INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760), + INTC_VECT(SCIF1_ERI, 0x780), INTC_VECT(SCIF1_RXI, 0x7a0), + INTC_VECT(SCIF1_BRI, 0x7c0), INTC_VECT(SCIF1_TXI, 0x7e0), + INTC_VECT(DMAC1_DMINT6, 0x880), INTC_VECT(DMAC1_DMINT7, 0x8a0), + INTC_VECT(DMAC1_DMINT8, 0x8c0), INTC_VECT(DMAC1_DMINT9, 0x8e0), + INTC_VECT(DMAC1_DMINT10, 0x900), INTC_VECT(DMAC1_DMINT11, 0x920), + INTC_VECT(DMAC1_DMAE, 0x940), + INTC_VECT(HSPI, 0x960), + INTC_VECT(SCIF2, 0x980), INTC_VECT(SCIF3, 0x9a0), + INTC_VECT(SCIF4, 0x9c0), INTC_VECT(SCIF5, 0x9e0), + INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20), + INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60), + INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIERR, 0xaa0), + INTC_VECT(PCIPWD3, 0xac0), INTC_VECT(PCIPWD2, 0xae0), + INTC_VECT(PCIPWD1, 0xb00), INTC_VECT(PCIPWD0, 0xb20), + INTC_VECT(SIOF, 0xc00), + INTC_VECT(MMCIF_FSTAT, 0xd00), INTC_VECT(MMCIF_TRAN, 0xd20), + INTC_VECT(MMCIF_ERR, 0xd40), INTC_VECT(MMCIF_FRDY, 0xd60), + INTC_VECT(DU, 0xd80), + INTC_VECT(GDTA_GACLI, 0xda0), INTC_VECT(GDTA_GAMCI, 0xdc0), + INTC_VECT(GDTA_GAERI, 0xde0), + INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20), + INTC_VECT(TMU5, 0xe40), + INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0), + INTC_VECT(HAC0, 0xec0), INTC_VECT(HAC1, 0xee0), + INTC_VECT(FLCTL_FLSTE, 0xf00), INTC_VECT(FLCTL_FLEND, 0xf20), + INTC_VECT(FLCTL_FLTRQ0, 0xf40), INTC_VECT(FLCTL_FLTRQ1, 0xf60), + INTC_VECT(GPIOI0, 0xf80), INTC_VECT(GPIOI1, 0xfa0), + INTC_VECT(GPIOI2, 0xfc0), INTC_VECT(GPIOI3, 0xfe0), +}; - .intc2_data = intc2_irq_table, - .nr_irqs = ARRAY_SIZE(intc2_irq_table), +static struct intc_group groups[] __initdata = { + INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI), + INTC_GROUP(DMAC0, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, + DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE), + INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), + INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI), + INTC_GROUP(DMAC1, DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8, + DMAC1_DMINT9, DMAC1_DMINT10, DMAC1_DMINT11, DMAC1_DMAE), + INTC_GROUP(PCIC5, PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0), + INTC_GROUP(MMCIF, MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY), + INTC_GROUP(GDTA, GDTA_GACLI, GDTA_GAMCI, GDTA_GAERI), + INTC_GROUP(TMU345, TMU3, TMU4, TMU5), + INTC_GROUP(FLCTL, FLCTL_FLSTE, FLCTL_FLEND, + FLCTL_FLTRQ0, FLCTL_FLTRQ1), + INTC_GROUP(GPIO, GPIOI0, GPIOI1, GPIOI2, GPIOI3), +}; - .chip = { - .name = "INTC2-sh7785", - }, +static struct intc_prio priorities[] __initdata = { + INTC_PRIO(SCIF0, 3), + INTC_PRIO(SCIF1, 3), + INTC_PRIO(SCIF2, 3), + INTC_PRIO(SCIF3, 3), + INTC_PRIO(SCIF4, 3), + INTC_PRIO(SCIF5, 3), +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, + + { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */ + { IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH, + IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH, + IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH, + IRL0_HHLL, IRL0_HHLH, IRL0_HHHL, 0, + IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH, + IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH, + IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH, + IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, 0, } }, + + { 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */ + { 0, 0, 0, GDTA, DU, SSI0, SSI1, GPIO, + FLCTL, MMCIF, HSPI, SIOF, PCIC5, PCIINTD, PCIINTC, PCIINTB, + PCIINTA, PCISERR, HAC1, HAC0, DMAC1, DMAC0, HUDI, WDT, + SCIF5, SCIF4, SCIF3, SCIF2, SCIF1, SCIF0, TMU345, TMU012 } }, +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3, + IRQ4, IRQ5, IRQ6, IRQ7 } }, + { 0xffd40000, 0, 32, 8, /* INT2PRI0 */ { TMU0, TMU1, + TMU2, TMU2_TICPI } }, + { 0xffd40004, 0, 32, 8, /* INT2PRI1 */ { TMU3, TMU4, TMU5, } }, + { 0xffd40008, 0, 32, 8, /* INT2PRI2 */ { SCIF0, SCIF1, + SCIF2, SCIF3 } }, + { 0xffd4000c, 0, 32, 8, /* INT2PRI3 */ { SCIF4, SCIF5, WDT, } }, + { 0xffd40010, 0, 32, 8, /* INT2PRI4 */ { HUDI, DMAC0, DMAC1, } }, + { 0xffd40014, 0, 32, 8, /* INT2PRI5 */ { HAC0, HAC1, + PCISERR, PCIINTA } }, + { 0xffd40018, 0, 32, 8, /* INT2PRI6 */ { PCIINTB, PCIINTC, + PCIINTD, PCIC5 } }, + { 0xffd4001c, 0, 32, 8, /* INT2PRI7 */ { SIOF, HSPI, MMCIF, } }, + { 0xffd40020, 0, 32, 8, /* INT2PRI8 */ { FLCTL, GPIO, SSI0, SSI1, } }, + { 0xffd40024, 0, 32, 8, /* INT2PRI9 */ { DU, GDTA, } }, +}; + +static DECLARE_INTC_DESC(intc_desc, "sh7785", vectors, groups, priorities, + mask_registers, prio_registers, NULL); + +/* Support for external interrupt pins in IRQ mode */ + +static struct intc_vect vectors_irq0123[] __initdata = { + INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280), + INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300), +}; + +static struct intc_vect vectors_irq4567[] __initdata = { + INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380), + INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200), +}; + +static struct intc_sense_reg sense_registers[] __initdata = { + { 0xffd0001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3, + IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC(intc_desc_irq0123, "sh7785-irq0123", vectors_irq0123, + NULL, NULL, mask_registers, prio_registers, + sense_registers); + +static DECLARE_INTC_DESC(intc_desc_irq4567, "sh7785-irq4567", vectors_irq4567, + NULL, NULL, mask_registers, prio_registers, + sense_registers); + +/* External interrupt pins in IRL mode */ + +static struct intc_vect vectors_irl0123[] __initdata = { + INTC_VECT(IRL0_LLLL, 0x200), INTC_VECT(IRL0_LLLH, 0x220), + INTC_VECT(IRL0_LLHL, 0x240), INTC_VECT(IRL0_LLHH, 0x260), + INTC_VECT(IRL0_LHLL, 0x280), INTC_VECT(IRL0_LHLH, 0x2a0), + INTC_VECT(IRL0_LHHL, 0x2c0), INTC_VECT(IRL0_LHHH, 0x2e0), + INTC_VECT(IRL0_HLLL, 0x300), INTC_VECT(IRL0_HLLH, 0x320), + INTC_VECT(IRL0_HLHL, 0x340), INTC_VECT(IRL0_HLHH, 0x360), + INTC_VECT(IRL0_HHLL, 0x380), INTC_VECT(IRL0_HHLH, 0x3a0), + INTC_VECT(IRL0_HHHL, 0x3c0), }; +static struct intc_vect vectors_irl4567[] __initdata = { + INTC_VECT(IRL4_LLLL, 0xb00), INTC_VECT(IRL4_LLLH, 0xb20), + INTC_VECT(IRL4_LLHL, 0xb40), INTC_VECT(IRL4_LLHH, 0xb60), + INTC_VECT(IRL4_LHLL, 0xb80), INTC_VECT(IRL4_LHLH, 0xba0), + INTC_VECT(IRL4_LHHL, 0xbc0), INTC_VECT(IRL4_LHHH, 0xbe0), + INTC_VECT(IRL4_HLLL, 0xc00), INTC_VECT(IRL4_HLLH, 0xc20), + INTC_VECT(IRL4_HLHL, 0xc40), INTC_VECT(IRL4_HLHH, 0xc60), + INTC_VECT(IRL4_HHLL, 0xc80), INTC_VECT(IRL4_HHLH, 0xca0), + INTC_VECT(IRL4_HHHL, 0xcc0), +}; + +static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7785-irl0123", vectors_irl0123, + NULL, NULL, mask_registers, NULL, NULL); + +static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7785-irl4567", vectors_irl4567, + NULL, NULL, mask_registers, NULL, NULL); + +#define INTC_ICR0 0xffd00000 +#define INTC_INTMSK0 0xffd00044 +#define INTC_INTMSK1 0xffd00048 +#define INTC_INTMSK2 0xffd40080 +#define INTC_INTMSKCLR1 0xffd00068 +#define INTC_INTMSKCLR2 0xffd40084 + void __init plat_irq_setup(void) { - register_intc2_controller(&intc2_irq_desc); + /* disable IRQ3-0 + IRQ7-4 */ + ctrl_outl(0xff000000, INTC_INTMSK0); + + /* disable IRL3-0 + IRL7-4 */ + ctrl_outl(0xc0000000, INTC_INTMSK1); + ctrl_outl(0xfffefffe, INTC_INTMSK2); + + /* select IRL mode for IRL3-0 + IRL7-4 */ + ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0); + + /* disable holding function, ie enable "SH-4 Mode" */ + ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00200000, INTC_ICR0); + + register_intc_controller(&intc_desc); } +void __init plat_irq_setup_pins(int mode) +{ + ctrl_outl(0xc0000000, INTC_INTMSKCLR1); + ctrl_outl(0xfffefffe, INTC_INTMSKCLR2); + return; + + switch (mode) { + case IRQ_MODE_IRQ7654: + /* select IRQ mode for IRL7-4 */ + ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00400000, INTC_ICR0); + register_intc_controller(&intc_desc_irq4567); + break; + case IRQ_MODE_IRQ3210: + /* select IRQ mode for IRL3-0 */ + ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00800000, INTC_ICR0); + register_intc_controller(&intc_desc_irq0123); + break; + case IRQ_MODE_IRL7654: + /* enable IRL7-4 but don't provide any masking */ + ctrl_outl(0x40000000, INTC_INTMSKCLR1); + ctrl_outl(0x0000fffe, INTC_INTMSKCLR2); + break; + case IRQ_MODE_IRL3210: + /* enable IRL0-3 but don't provide any masking */ + ctrl_outl(0x80000000, INTC_INTMSKCLR1); + ctrl_outl(0xfffe0000, INTC_INTMSKCLR2); + break; + case IRQ_MODE_IRL7654_MASK: + /* enable IRL7-4 and mask using cpu intc controller */ + ctrl_outl(0x40000000, INTC_INTMSKCLR1); + register_intc_controller(&intc_desc_irl4567); + break; + case IRQ_MODE_IRL3210_MASK: + /* enable IRL0-3 and mask using cpu intc controller */ + ctrl_outl(0x80000000, INTC_INTMSKCLR1); + register_intc_controller(&intc_desc_irl0123); + break; + default: + BUG(); + } +} + +void __init plat_mem_setup(void) +{ + /* Register the URAM space as Node 1 */ + setup_bootmem_node(1, 0x055f0000, 0x05610000); +} diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c index 704c064..c6cdd7e 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c +++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c @@ -11,6 +11,7 @@ #include #include #include #include +#include #include static struct plat_sci_port sci_platform_data[] = { @@ -58,28 +59,229 @@ static int __init shx3_devices_setup(voi } __initcall(shx3_devices_setup); -static struct intc2_data intc2_irq_table[] = { - { 16, 0, 0, 0, 1, 2 }, /* TMU0 */ - { 40, 4, 0, 0x20, 0, 3 }, /* SCIF0 ERI */ - { 41, 4, 0, 0x20, 1, 3 }, /* SCIF0 RXI */ - { 42, 4, 0, 0x20, 2, 3 }, /* SCIF0 BRI */ - { 43, 4, 0, 0x20, 3, 3 }, /* SCIF0 TXI */ +enum { + UNUSED = 0, + + /* interrupt sources */ + IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH, + IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH, + IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH, + IRL_HHLL, IRL_HHLH, IRL_HHHL, + IRQ0, IRQ1, IRQ2, IRQ3, + HUDII, + TMU0, TMU1, TMU2, TMU3, TMU4, TMU5, + PCII0, PCII1, PCII2, PCII3, PCII4, + PCII5, PCII6, PCII7, PCII8, PCII9, + SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, + SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI, + SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI, + SCIF3_ERI, SCIF3_RXI, SCIF3_BRI, SCIF3_TXI, + DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3, + DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE, + DU, + DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8, DMAC1_DMINT9, + DMAC1_DMINT10, DMAC1_DMINT11, DMAC1_DMAE, + IIC, VIN0, VIN1, VCORE0, ATAPI, + DTU0_TEND, DTU0_AE, DTU0_TMISS, + DTU1_TEND, DTU1_AE, DTU1_TMISS, + DTU2_TEND, DTU2_AE, DTU2_TMISS, + DTU3_TEND, DTU3_AE, DTU3_TMISS, + FE0, FE1, + GPIO0, GPIO1, GPIO2, GPIO3, + PAM, IRM, + INTICI0, INTICI1, INTICI2, INTICI3, + INTICI4, INTICI5, INTICI6, INTICI7, + + /* interrupt groups */ + IRL, PCII56789, SCIF0, SCIF1, SCIF2, SCIF3, + DMAC0, DMAC1, DTU0, DTU1, DTU2, DTU3, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_VECT(HUDII, 0x3e0), + INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), + INTC_VECT(TMU2, 0x440), INTC_VECT(TMU3, 0x460), + INTC_VECT(TMU4, 0x480), INTC_VECT(TMU5, 0x4a0), + INTC_VECT(PCII0, 0x500), INTC_VECT(PCII1, 0x520), + INTC_VECT(PCII2, 0x540), INTC_VECT(PCII3, 0x560), + INTC_VECT(PCII4, 0x580), INTC_VECT(PCII5, 0x5a0), + INTC_VECT(PCII6, 0x5c0), INTC_VECT(PCII7, 0x5e0), + INTC_VECT(PCII8, 0x600), INTC_VECT(PCII9, 0x620), + INTC_VECT(SCIF0_ERI, 0x700), INTC_VECT(SCIF0_RXI, 0x720), + INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760), + INTC_VECT(SCIF1_ERI, 0x780), INTC_VECT(SCIF1_RXI, 0x7a0), + INTC_VECT(SCIF1_BRI, 0x7c0), INTC_VECT(SCIF1_TXI, 0x7e0), + INTC_VECT(SCIF2_ERI, 0x800), INTC_VECT(SCIF2_RXI, 0x820), + INTC_VECT(SCIF2_BRI, 0x840), INTC_VECT(SCIF2_TXI, 0x860), + INTC_VECT(SCIF3_ERI, 0x880), INTC_VECT(SCIF3_RXI, 0x8a0), + INTC_VECT(SCIF3_BRI, 0x8c0), INTC_VECT(SCIF3_TXI, 0x8e0), + INTC_VECT(DMAC0_DMINT0, 0x900), INTC_VECT(DMAC0_DMINT1, 0x920), + INTC_VECT(DMAC0_DMINT2, 0x940), INTC_VECT(DMAC0_DMINT3, 0x960), + INTC_VECT(DMAC0_DMINT4, 0x980), INTC_VECT(DMAC0_DMINT5, 0x9a0), + INTC_VECT(DMAC0_DMAE, 0x9c0), + INTC_VECT(DU, 0x9e0), + INTC_VECT(DMAC1_DMINT6, 0xa00), INTC_VECT(DMAC1_DMINT7, 0xa20), + INTC_VECT(DMAC1_DMINT8, 0xa40), INTC_VECT(DMAC1_DMINT9, 0xa60), + INTC_VECT(DMAC1_DMINT10, 0xa80), INTC_VECT(DMAC1_DMINT11, 0xaa0), + INTC_VECT(DMAC1_DMAE, 0xac0), + INTC_VECT(IIC, 0xae0), + INTC_VECT(VIN0, 0xb00), INTC_VECT(VIN1, 0xb20), + INTC_VECT(VCORE0, 0xb00), INTC_VECT(ATAPI, 0xb60), + INTC_VECT(DTU0_TEND, 0xc00), INTC_VECT(DTU0_AE, 0xc20), + INTC_VECT(DTU0_TMISS, 0xc40), + INTC_VECT(DTU1_TEND, 0xc60), INTC_VECT(DTU1_AE, 0xc80), + INTC_VECT(DTU1_TMISS, 0xca0), + INTC_VECT(DTU2_TEND, 0xcc0), INTC_VECT(DTU2_AE, 0xce0), + INTC_VECT(DTU2_TMISS, 0xd00), + INTC_VECT(DTU3_TEND, 0xd20), INTC_VECT(DTU3_AE, 0xd40), + INTC_VECT(DTU3_TMISS, 0xd60), + INTC_VECT(FE0, 0xe00), INTC_VECT(FE1, 0xe20), + INTC_VECT(GPIO0, 0xe40), INTC_VECT(GPIO1, 0xe60), + INTC_VECT(GPIO2, 0xe80), INTC_VECT(GPIO3, 0xea0), + INTC_VECT(PAM, 0xec0), INTC_VECT(IRM, 0xee0), + INTC_VECT(INTICI0, 0xf00), INTC_VECT(INTICI1, 0xf20), + INTC_VECT(INTICI2, 0xf40), INTC_VECT(INTICI3, 0xf60), + INTC_VECT(INTICI4, 0xf80), INTC_VECT(INTICI5, 0xfa0), + INTC_VECT(INTICI6, 0xfc0), INTC_VECT(INTICI7, 0xfe0), }; -static struct intc2_desc intc2_irq_desc __read_mostly = { - .prio_base = 0xfe410000, - .msk_base = 0xfe410820, - .mskclr_base = 0xfe410850, +static struct intc_group groups[] __initdata = { + INTC_GROUP(IRL, IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH, + IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH, + IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH, + IRL_HHLL, IRL_HHLH, IRL_HHHL), + INTC_GROUP(PCII56789, PCII5, PCII6, PCII7, PCII8, PCII9), + INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), + INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI), + INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI), + INTC_GROUP(SCIF3, SCIF3_ERI, SCIF3_RXI, SCIF3_BRI, SCIF3_TXI), + INTC_GROUP(DMAC0, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, + DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE), + INTC_GROUP(DMAC1, DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8, + DMAC1_DMINT9, DMAC1_DMINT10, DMAC1_DMINT11), + INTC_GROUP(DTU0, DTU0_TEND, DTU0_AE, DTU0_TMISS), + INTC_GROUP(DTU1, DTU1_TEND, DTU1_AE, DTU1_TMISS), + INTC_GROUP(DTU2, DTU2_TEND, DTU2_AE, DTU2_TMISS), + INTC_GROUP(DTU3, DTU3_TEND, DTU3_AE, DTU3_TMISS), +}; - .intc2_data = intc2_irq_table, - .nr_irqs = ARRAY_SIZE(intc2_irq_table), +static struct intc_prio priorities[] __initdata = { + INTC_PRIO(SCIF0, 3), + INTC_PRIO(SCIF1, 3), + INTC_PRIO(SCIF2, 3), + INTC_PRIO(SCIF3, 3), +}; - .chip = { - .name = "INTC2-SHX3", - }, +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xfe410030, 0xfe410050, 32, /* CnINTMSK0 / CnINTMSKCLR0 */ + { IRQ0, IRQ1, IRQ2, IRQ3 } }, + { 0xfe410040, 0xfe410060, 32, /* CnINTMSK1 / CnINTMSKCLR1 */ + { IRL } }, + { 0xfe410820, 0xfe410850, 32, /* CnINT2MSK0 / CnINT2MSKCLR0 */ + { FE1, FE0, 0, ATAPI, VCORE0, VIN1, VIN0, IIC, + DU, GPIO3, GPIO2, GPIO1, GPIO0, PAM, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, /* HUDI bits ignored */ + 0, TMU5, TMU4, TMU3, TMU2, TMU1, TMU0, 0, } }, + { 0xfe410830, 0xfe410860, 32, /* CnINT2MSK1 / CnINT2MSKCLR1 */ + { 0, 0, 0, 0, DTU3, DTU2, DTU1, DTU0, /* IRM bits ignored */ + PCII9, PCII8, PCII7, PCII6, PCII5, PCII4, PCII3, PCII2, + PCII1, PCII0, DMAC1_DMAE, DMAC1_DMINT11, + DMAC1_DMINT10, DMAC1_DMINT9, DMAC1_DMINT8, DMAC1_DMINT7, + DMAC1_DMINT6, DMAC0_DMAE, DMAC0_DMINT5, DMAC0_DMINT4, + DMAC0_DMINT3, DMAC0_DMINT2, DMAC0_DMINT1, DMAC0_DMINT0 } }, + { 0xfe410840, 0xfe410870, 32, /* CnINT2MSK2 / CnINT2MSKCLR2 */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + SCIF3_TXI, SCIF3_BRI, SCIF3_RXI, SCIF3_ERI, + SCIF2_TXI, SCIF2_BRI, SCIF2_RXI, SCIF2_ERI, + SCIF1_TXI, SCIF1_BRI, SCIF1_RXI, SCIF1_ERI, + SCIF0_TXI, SCIF0_BRI, SCIF0_RXI, SCIF0_ERI } }, +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xfe410010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3 } }, + + { 0xfe410800, 0, 32, 4, /* INT2PRI0 */ { 0, HUDII, TMU5, TMU4, + TMU3, TMU2, TMU1, TMU0 } }, + { 0xfe410804, 0, 32, 4, /* INT2PRI1 */ { DTU3, DTU2, DTU1, DTU0, + SCIF3, SCIF2, + SCIF1, SCIF0 } }, + { 0xfe410808, 0, 32, 4, /* INT2PRI2 */ { DMAC1, DMAC0, + PCII56789, PCII4, + PCII3, PCII2, + PCII1, PCII0 } }, + { 0xfe41080c, 0, 32, 4, /* INT2PRI3 */ { FE1, FE0, ATAPI, VCORE0, + VIN1, VIN0, IIC, DU} }, + { 0xfe410810, 0, 32, 4, /* INT2PRI4 */ { 0, 0, PAM, GPIO3, + GPIO2, GPIO1, GPIO0, IRM } }, + { 0xfe410090, 0xfe4100a0, 32, 4, /* CnICIPRI / CnICIPRICLR */ + { INTICI7, INTICI6, INTICI5, INTICI4, + INTICI3, INTICI2, INTICI1, INTICI0 }, INTC_SMP(4, 4) }, +}; + +static DECLARE_INTC_DESC(intc_desc, "shx3", vectors, groups, priorities, + mask_registers, prio_registers, NULL); + +/* Support for external interrupt pins in IRQ mode */ +static struct intc_vect vectors_irq[] __initdata = { + INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280), + INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300), +}; + +static struct intc_sense_reg sense_registers[] __initdata = { + { 0xfe41001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3 } }, }; +static DECLARE_INTC_DESC(intc_desc_irq, "shx3-irq", vectors_irq, groups, + priorities, mask_registers, prio_registers, + sense_registers); + +/* External interrupt pins in IRL mode */ +static struct intc_vect vectors_irl[] __initdata = { + INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220), + INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260), + INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0), + INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0), + INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320), + INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360), + INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0), + INTC_VECT(IRL_HHHL, 0x3c0), +}; + +static DECLARE_INTC_DESC(intc_desc_irl, "shx3-irl", vectors_irl, groups, + priorities, mask_registers, prio_registers, NULL); + +void __init plat_irq_setup_pins(int mode) +{ + switch (mode) { + case IRQ_MODE_IRQ: + register_intc_controller(&intc_desc_irq); + break; + case IRQ_MODE_IRL3210: + register_intc_controller(&intc_desc_irl); + break; + default: + BUG(); + } +} + void __init plat_irq_setup(void) { - register_intc2_controller(&intc2_irq_desc); + register_intc_controller(&intc_desc); +} + +void __init plat_mem_setup(void) +{ + unsigned int nid = 1; + + /* Register CPU#0 URAM space as Node 1 */ + setup_bootmem_node(nid++, 0x145f0000, 0x14610000); /* CPU0 */ + +#if 0 + /* XXX: Not yet.. */ + setup_bootmem_node(nid++, 0x14df0000, 0x14e10000); /* CPU1 */ + setup_bootmem_node(nid++, 0x155f0000, 0x15610000); /* CPU2 */ + setup_bootmem_node(nid++, 0x15df0000, 0x15e10000); /* CPU3 */ +#endif + + setup_bootmem_node(nid++, 0x16000000, 0x16020000); /* CSM */ } diff --git a/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/arch/sh/kernel/cpu/sh4a/smp-shx3.c new file mode 100644 index 0000000..e5e0684 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/smp-shx3.c @@ -0,0 +1,120 @@ +/* + * SH-X3 SMP + * + * Copyright (C) 2007 Paul Mundt + * Copyright (C) 2007 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include + +void __init plat_smp_setup(void) +{ + unsigned int cpu = 0; + int i, num; + + cpus_clear(cpu_possible_map); + cpu_set(cpu, cpu_possible_map); + + __cpu_number_map[0] = 0; + __cpu_logical_map[0] = 0; + + /* + * Do this stupidly for now.. we don't have an easy way to probe + * for the total number of cores. + */ + for (i = 1, num = 0; i < NR_CPUS; i++) { + cpu_set(i, cpu_possible_map); + __cpu_number_map[i] = ++num; + __cpu_logical_map[num] = i; + } + + printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num); +} + +void __init plat_prepare_cpus(unsigned int max_cpus) +{ +} + +#define STBCR_REG(phys_id) (0xfe400004 | (phys_id << 12)) +#define RESET_REG(phys_id) (0xfe400008 | (phys_id << 12)) + +#define STBCR_MSTP 0x00000001 +#define STBCR_RESET 0x00000002 +#define STBCR_LTSLP 0x80000000 + +#define STBCR_AP_VAL (STBCR_RESET | STBCR_LTSLP) + +void plat_start_cpu(unsigned int cpu, unsigned long entry_point) +{ + ctrl_outl(entry_point, RESET_REG(cpu)); + + if (!(ctrl_inl(STBCR_REG(cpu)) & STBCR_MSTP)) + ctrl_outl(STBCR_MSTP, STBCR_REG(cpu)); + + while (!(ctrl_inl(STBCR_REG(cpu)) & STBCR_MSTP)) + ; + + /* Start up secondary processor by sending a reset */ + ctrl_outl(STBCR_AP_VAL, STBCR_REG(cpu)); +} + +int plat_smp_processor_id(void) +{ + return ctrl_inl(0xff000048); /* CPIDR */ +} + +void plat_send_ipi(unsigned int cpu, unsigned int message) +{ + unsigned long addr = 0xfe410070 + (cpu * 4); + + BUG_ON(cpu >= 4); + BUG_ON(message >= SMP_MSG_NR); + + ctrl_outl(1 << (message << 2), addr); /* C0INTICI..CnINTICI */ +} + +struct ipi_data { + void (*handler)(void *); + void *arg; + unsigned int message; +}; + +static irqreturn_t ipi_interrupt_handler(int irq, void *arg) +{ + struct ipi_data *id = arg; + unsigned int cpu = hard_smp_processor_id(); + unsigned int offs = 4 * cpu; + unsigned int x; + + x = ctrl_inl(0xfe410070 + offs); /* C0INITICI..CnINTICI */ + x &= (1 << (id->message << 2)); + ctrl_outl(x, 0xfe410080 + offs); /* C0INTICICLR..CnINTICICLR */ + + id->handler(id->arg); + + return IRQ_HANDLED; +} + +static struct ipi_data ipi_handlers[SMP_MSG_NR]; + +int plat_register_ipi_handler(unsigned int message, + void (*handler)(void *), void *arg) +{ + struct ipi_data *id = &ipi_handlers[message]; + + BUG_ON(SMP_MSG_NR >= 8); + BUG_ON(message >= SMP_MSG_NR); + + id->handler = handler; + id->arg = arg; + id->message = message; + + return request_irq(104 + message, ipi_interrupt_handler, 0, "IPI", id); +} diff --git a/arch/sh/kernel/cpufreq.c b/arch/sh/kernel/cpufreq.c index e618902..c766897 100644 --- a/arch/sh/kernel/cpufreq.c +++ b/arch/sh/kernel/cpufreq.c @@ -77,8 +77,6 @@ static int sh_cpufreq_target(struct cpuf static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy) { - printk(KERN_INFO "cpufreq: SuperH CPU frequency driver.\n"); - if (!cpu_online(policy->cpu)) return -ENODEV; @@ -144,6 +142,7 @@ static struct cpufreq_driver sh_cpufreq_ static int __init sh_cpufreq_module_init(void) { + printk(KERN_INFO "cpufreq: SuperH CPU frequency driver.\n"); return cpufreq_register_driver(&sh_cpufreq_driver); } diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c index 80b637c..85ed5b7 100644 --- a/arch/sh/kernel/early_printk.c +++ b/arch/sh/kernel/early_printk.c @@ -13,6 +13,7 @@ #include #include #include #include +#include #ifdef CONFIG_SH_STANDARD_BIOS #include @@ -62,6 +63,18 @@ #ifdef CONFIG_EARLY_SCIF_CONSOLE #include #include "../../../drivers/serial/sh-sci.h" +#if defined(CONFIG_CPU_SUBTYPE_SH7720) +#define EPK_SCSMR_VALUE 0x000 +#define EPK_SCBRR_VALUE 0x00C +#define EPK_FIFO_SIZE 64 +#define EPK_FIFO_BITS (0x7f00 >> 8) +#else +#define EPK_FIFO_SIZE 16 +#define EPK_FIFO_BITS (0x1f00 >> 8) +#endif + + + static struct uart_port scif_port = { .mapbase = CONFIG_EARLY_SCIF_CONSOLE_PORT, .membase = (char __iomem *)CONFIG_EARLY_SCIF_CONSOLE_PORT, @@ -69,7 +82,7 @@ static struct uart_port scif_port = { static void scif_sercon_putc(int c) { - while (((sci_in(&scif_port, SCFDR) & 0x1f00 >> 8) == 16)) + while (((sci_in(&scif_port, SCFDR) & EPK_FIFO_BITS) >= EPK_FIFO_SIZE)) ; sci_out(&scif_port, SCxTDR, c); @@ -105,7 +118,22 @@ static struct console scif_console = { .index = -1, }; -#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS) +#if !defined(CONFIG_SH_STANDARD_BIOS) +#if defined(CONFIG_CPU_SUBTYPE_SH7720) +static void scif_sercon_init(char *s) +{ + sci_out(&scif_port, SCSCR, 0x0000); /* clear TE and RE */ + sci_out(&scif_port, SCFCR, 0x4006); /* reset */ + sci_out(&scif_port, SCSCR, 0x0000); /* select internal clock */ + sci_out(&scif_port, SCSMR, EPK_SCSMR_VALUE); + sci_out(&scif_port, SCBRR, EPK_SCBRR_VALUE); + + mdelay(1); /* wait 1-bit time */ + + sci_out(&scif_port, SCFCR, 0x0030); /* TTRG=b'11 */ + sci_out(&scif_port, SCSCR, 0x0030); /* TE, RE */ +} +#elif defined(CONFIG_CPU_SH4) #define DEFAULT_BAUD 115200 /* * Simple SCIF init, primarily aimed at SH7750 and other similar SH-4 @@ -146,7 +174,8 @@ static void scif_sercon_init(char *s) ctrl_outw(0, scif_port.mapbase + 36); ctrl_outw(0x30, scif_port.mapbase + 8); } -#endif /* CONFIG_CPU_SH4 && !CONFIG_SH_STANDARD_BIOS */ +#endif /* defined(CONFIG_CPU_SUBTYPE_SH7720) */ +#endif /* !defined(CONFIG_SH_STANDARD_BIOS) */ #endif /* CONFIG_EARLY_SCIF_CONSOLE */ /* @@ -186,7 +215,8 @@ #if defined(CONFIG_EARLY_SCIF_CONSOLE) if (!strncmp(buf, "serial", 6)) { early_console = &scif_console; -#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS) +#if (defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SUBTYPE_SH7720)) && \ + !defined(CONFIG_SH_STANDARD_BIOS) scif_sercon_init(buf + 6); #endif } diff --git a/arch/sh/kernel/head.S b/arch/sh/kernel/head.S index 0bccc0c..3338239 100644 --- a/arch/sh/kernel/head.S +++ b/arch/sh/kernel/head.S @@ -54,8 +54,8 @@ ENTRY(_stext) mov.l 1f, r0 ! MD=1, RB=0, BL=0, IMASK=0xF ldc r0, sr ! Initialize global interrupt mask - mov #0, r0 #ifdef CONFIG_CPU_HAS_SR_RB + mov #0, r0 ldc r0, r6_bank #endif @@ -72,15 +72,18 @@ #endif ! mov.l 2f, r0 mov r0, r15 ! Set initial r15 (stack pointer) - mov #(THREAD_SIZE >> 10), r1 - shll8 r1 ! r1 = THREAD_SIZE - shll2 r1 - sub r1, r0 ! #ifdef CONFIG_CPU_HAS_SR_RB + mov.l 7f, r0 ldc r0, r7_bank ! ... and initial thread_info #endif ! Clear BSS area +#ifdef CONFIG_SMP + mov.l 3f, r0 + cmp/eq #0, r0 ! skip clear if set to zero + bt 10f +#endif + mov.l 3f, r1 add #4, r1 mov.l 4f, r2 @@ -89,13 +92,14 @@ #endif bf/s 9b ! while (r1 < r2) mov.l r0,@-r2 +10: ! Additional CPU initialization mov.l 6f, r0 jsr @r0 nop SYNCO() ! Wait for pending instructions.. - + ! Start kernel mov.l 5f, r0 jmp @r0 @@ -107,8 +111,10 @@ #if defined(CONFIG_CPU_SH2) #else 1: .long 0x400080F0 ! MD=1, RB=0, BL=0, FD=1, IMASK=0xF #endif +ENTRY(stack_start) 2: .long init_thread_union+THREAD_SIZE 3: .long __bss_start 4: .long _end 5: .long start_kernel 6: .long sh_cpu_init +7: .long init_thread_union diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 2cf7dec..b3027a6 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -22,6 +22,7 @@ #include #include #include #include +#include #include #include #include @@ -42,7 +43,13 @@ extern void * __rd_start, * __rd_end; * This value will be used at the very early stage of serial setup. * The bigger value means no problem. */ -struct sh_cpuinfo boot_cpu_data = { CPU_SH_NONE, 10000000, }; +struct sh_cpuinfo cpu_data[NR_CPUS] __read_mostly = { + [0] = { + .type = CPU_SH_NONE, + .loops_per_jiffy = 10000000, + }, +}; +EXPORT_SYMBOL(cpu_data); /* * The machine vector. First entry in .machvec.init, or clobbered by @@ -272,6 +279,10 @@ #endif sh_mv.mv_setup(cmdline_p); paging_init(); + +#ifdef CONFIG_SMP + plat_smp_setup(); +#endif } static const char *cpu_name[] = { @@ -279,7 +290,7 @@ static const char *cpu_name[] = { [CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706", [CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708", [CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710", - [CPU_SH7712] = "SH7712", + [CPU_SH7712] = "SH7712", [CPU_SH7720] = "SH7720", [CPU_SH7729] = "SH7729", [CPU_SH7750] = "SH7750", [CPU_SH7750S] = "SH7750S", [CPU_SH7750R] = "SH7750R", [CPU_SH7751] = "SH7751", [CPU_SH7751R] = "SH7751R", diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c index 37aef0a..cac7380 100644 --- a/arch/sh/kernel/sh_ksyms.c +++ b/arch/sh/kernel/sh_ksyms.c @@ -43,7 +43,6 @@ EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(memset); EXPORT_SYMBOL(memmove); EXPORT_SYMBOL(__copy_user); -EXPORT_SYMBOL(boot_cpu_data); #ifdef CONFIG_MMU EXPORT_SYMBOL(get_vm_area); @@ -53,6 +52,7 @@ #endif EXPORT_SYMBOL(__up); EXPORT_SYMBOL(__down); EXPORT_SYMBOL(__down_interruptible); +EXPORT_SYMBOL(__down_trylock); EXPORT_SYMBOL(__udelay); EXPORT_SYMBOL(__ndelay); @@ -128,7 +128,8 @@ DECLARE_EXPORT(__movstrSI12_i4); #endif /* __GNUC__ == 4 */ #endif -#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB) +#if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \ + defined(CONFIG_SH7705_CACHE_32KB)) /* needed by some modules */ EXPORT_SYMBOL(flush_cache_all); EXPORT_SYMBOL(flush_cache_range); @@ -136,17 +137,11 @@ EXPORT_SYMBOL(flush_dcache_page); EXPORT_SYMBOL(__flush_purge_region); #endif -#if defined(CONFIG_MMU) && (defined(CONFIG_CPU_SH4) || \ - defined(CONFIG_SH7705_CACHE_32KB)) +#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \ + (defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)) EXPORT_SYMBOL(clear_user_page); #endif -EXPORT_SYMBOL(__down_trylock); - -#ifdef CONFIG_SMP -EXPORT_SYMBOL(synchronize_irq); -#endif - EXPORT_SYMBOL(csum_partial); EXPORT_SYMBOL(csum_partial_copy_generic); #ifdef CONFIG_IPV6 diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c index 283e142..94075e1 100644 --- a/arch/sh/kernel/smp.c +++ b/arch/sh/kernel/smp.c @@ -3,68 +3,40 @@ * * SMP support for the SuperH processors. * - * Copyright (C) 2002, 2003 Paul Mundt + * Copyright (C) 2002 - 2007 Paul Mundt + * Copyright (C) 2006 - 2007 Akio Idehara * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ - #include #include #include #include #include -#include #include -#include +#include #include -#include -#include -#include -#include - +#include #include #include #include #include #include +#include +#include -/* - * This was written with the Sega Saturn (SMP SH-2 7604) in mind, - * but is designed to be usable regardless if there's an MMU - * present or not. - */ -struct sh_cpuinfo cpu_data[NR_CPUS]; - -extern void per_cpu_trap_init(void); +int __cpu_number_map[NR_CPUS]; /* Map physical to logical */ +int __cpu_logical_map[NR_CPUS]; /* Map logical to physical */ cpumask_t cpu_possible_map; EXPORT_SYMBOL(cpu_possible_map); cpumask_t cpu_online_map; EXPORT_SYMBOL(cpu_online_map); -static atomic_t cpus_booted = ATOMIC_INIT(0); -/* These are defined by the board-specific code. */ - -/* - * Cause the function described by call_data to be executed on the passed - * cpu. When the function has finished, increment the finished field of - * call_data. - */ -void __smp_send_ipi(unsigned int cpu, unsigned int action); - -/* - * Find the number of available processors - */ -unsigned int __smp_probe_cpus(void); - -/* - * Start a particular processor - */ -void __smp_slave_init(unsigned int cpu); +static atomic_t cpus_booted = ATOMIC_INIT(0); /* * Run specified function on a particular processor. @@ -73,74 +45,123 @@ void __smp_call_function(unsigned int cp static inline void __init smp_store_cpu_info(unsigned int cpu) { - cpu_data[cpu].loops_per_jiffy = loops_per_jiffy; + struct sh_cpuinfo *c = cpu_data + cpu; + + c->loops_per_jiffy = loops_per_jiffy; } void __init smp_prepare_cpus(unsigned int max_cpus) { unsigned int cpu = smp_processor_id(); - int i; - atomic_set(&cpus_booted, 1); - smp_store_cpu_info(cpu); - - for (i = 0; i < __smp_probe_cpus(); i++) - cpu_set(i, cpu_possible_map); + init_new_context(current, &init_mm); + current_thread_info()->cpu = cpu; + plat_prepare_cpus(max_cpus); + +#ifndef CONFIG_HOTPLUG_CPU + cpu_present_map = cpu_possible_map; +#endif } void __devinit smp_prepare_boot_cpu(void) { unsigned int cpu = smp_processor_id(); + __cpu_number_map[0] = cpu; + __cpu_logical_map[0] = cpu; + cpu_set(cpu, cpu_online_map); cpu_set(cpu, cpu_possible_map); } -int __cpu_up(unsigned int cpu) +asmlinkage void __cpuinit start_secondary(void) { - struct task_struct *tsk; + unsigned int cpu; + struct mm_struct *mm = &init_mm; - tsk = fork_idle(cpu); + atomic_inc(&mm->mm_count); + atomic_inc(&mm->mm_users); + current->active_mm = mm; + BUG_ON(current->mm); + enter_lazy_tlb(mm, current); - if (IS_ERR(tsk)) - panic("Failed forking idle task for cpu %d\n", cpu); - - task_thread_info(tsk)->cpu = cpu; + per_cpu_trap_init(); + + preempt_disable(); + + local_irq_enable(); + + calibrate_delay(); + + cpu = smp_processor_id(); + smp_store_cpu_info(cpu); cpu_set(cpu, cpu_online_map); - return 0; + cpu_idle(); } -int start_secondary(void *unused) +extern struct { + unsigned long sp; + unsigned long bss_start; + unsigned long bss_end; + void *start_kernel_fn; + void *cpu_init_fn; + void *thread_info; +} stack_start; + +int __cpuinit __cpu_up(unsigned int cpu) { - unsigned int cpu; + struct task_struct *tsk; + unsigned long timeout; - cpu = smp_processor_id(); + tsk = fork_idle(cpu); + if (IS_ERR(tsk)) { + printk(KERN_ERR "Failed forking idle task for cpu %d\n", cpu); + return PTR_ERR(tsk); + } - atomic_inc(&init_mm.mm_count); - current->active_mm = &init_mm; + /* Fill in data in head.S for secondary cpus */ + stack_start.sp = tsk->thread.sp; + stack_start.thread_info = tsk->stack; + stack_start.bss_start = 0; /* don't clear bss for secondary cpus */ + stack_start.start_kernel_fn = start_secondary; - smp_store_cpu_info(cpu); + flush_cache_all(); - __smp_slave_init(cpu); - preempt_disable(); - per_cpu_trap_init(); - - atomic_inc(&cpus_booted); + plat_start_cpu(cpu, (unsigned long)_stext); - cpu_idle(); - return 0; + timeout = jiffies + HZ; + while (time_before(jiffies, timeout)) { + if (cpu_online(cpu)) + break; + + udelay(10); + } + + if (cpu_online(cpu)) + return 0; + + return -ENOENT; } void __init smp_cpus_done(unsigned int max_cpus) { - smp_mb(); + unsigned long bogosum = 0; + int cpu; + + for_each_online_cpu(cpu) + bogosum += cpu_data[cpu].loops_per_jiffy; + + printk(KERN_INFO "SMP: Total of %d processors activated " + "(%lu.%02lu BogoMIPS).\n", num_online_cpus(), + bogosum / (500000/HZ), + (bogosum / (5000/HZ)) % 100); } void smp_send_reschedule(int cpu) { - __smp_send_ipi(cpu, SMP_MSG_RESCHEDULE); + plat_send_ipi(cpu, SMP_MSG_RESCHEDULE); } static void stop_this_cpu(void *unused) @@ -157,7 +178,6 @@ void smp_send_stop(void) smp_call_function(stop_this_cpu, 0, 1, 0); } - struct smp_fn_call_struct smp_fn_call = { .lock = SPIN_LOCK_UNLOCKED, .finished = ATOMIC_INIT(0), @@ -175,9 +195,6 @@ int smp_call_function(void (*func)(void unsigned int nr_cpus = atomic_read(&cpus_booted); int i; - if (nr_cpus < 2) - return 0; - /* Can deadlock when called with interrupts disabled */ WARN_ON(irqs_disabled()); @@ -189,7 +206,7 @@ int smp_call_function(void (*func)(void for (i = 0; i < nr_cpus; i++) if (i != smp_processor_id()) - __smp_call_function(i); + plat_send_ipi(i, SMP_MSG_FUNCTION); if (wait) while (atomic_read(&smp_fn_call.finished) != (nr_cpus - 1)); @@ -205,3 +222,143 @@ int setup_profiling_timer(unsigned int m return 0; } +static void flush_tlb_all_ipi(void *info) +{ + local_flush_tlb_all(); +} + +void flush_tlb_all(void) +{ + on_each_cpu(flush_tlb_all_ipi, 0, 1, 1); +} + +static void flush_tlb_mm_ipi(void *mm) +{ + local_flush_tlb_mm((struct mm_struct *)mm); +} + +/* + * The following tlb flush calls are invoked when old translations are + * being torn down, or pte attributes are changing. For single threaded + * address spaces, a new context is obtained on the current cpu, and tlb + * context on other cpus are invalidated to force a new context allocation + * at switch_mm time, should the mm ever be used on other cpus. For + * multithreaded address spaces, intercpu interrupts have to be sent. + * Another case where intercpu interrupts are required is when the target + * mm might be active on another cpu (eg debuggers doing the flushes on + * behalf of debugees, kswapd stealing pages from another process etc). + * Kanoj 07/00. + */ + +void flush_tlb_mm(struct mm_struct *mm) +{ + preempt_disable(); + + if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) { + smp_call_function(flush_tlb_mm_ipi, (void *)mm, 1, 1); + } else { + int i; + for (i = 0; i < num_online_cpus(); i++) + if (smp_processor_id() != i) + cpu_context(i, mm) = 0; + } + local_flush_tlb_mm(mm); + + preempt_enable(); +} + +struct flush_tlb_data { + struct vm_area_struct *vma; + unsigned long addr1; + unsigned long addr2; +}; + +static void flush_tlb_range_ipi(void *info) +{ + struct flush_tlb_data *fd = (struct flush_tlb_data *)info; + + local_flush_tlb_range(fd->vma, fd->addr1, fd->addr2); +} + +void flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ + struct mm_struct *mm = vma->vm_mm; + + preempt_disable(); + if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) { + struct flush_tlb_data fd; + + fd.vma = vma; + fd.addr1 = start; + fd.addr2 = end; + smp_call_function(flush_tlb_range_ipi, (void *)&fd, 1, 1); + } else { + int i; + for (i = 0; i < num_online_cpus(); i++) + if (smp_processor_id() != i) + cpu_context(i, mm) = 0; + } + local_flush_tlb_range(vma, start, end); + preempt_enable(); +} + +static void flush_tlb_kernel_range_ipi(void *info) +{ + struct flush_tlb_data *fd = (struct flush_tlb_data *)info; + + local_flush_tlb_kernel_range(fd->addr1, fd->addr2); +} + +void flush_tlb_kernel_range(unsigned long start, unsigned long end) +{ + struct flush_tlb_data fd; + + fd.addr1 = start; + fd.addr2 = end; + on_each_cpu(flush_tlb_kernel_range_ipi, (void *)&fd, 1, 1); +} + +static void flush_tlb_page_ipi(void *info) +{ + struct flush_tlb_data *fd = (struct flush_tlb_data *)info; + + local_flush_tlb_page(fd->vma, fd->addr1); +} + +void flush_tlb_page(struct vm_area_struct *vma, unsigned long page) +{ + preempt_disable(); + if ((atomic_read(&vma->vm_mm->mm_users) != 1) || + (current->mm != vma->vm_mm)) { + struct flush_tlb_data fd; + + fd.vma = vma; + fd.addr1 = page; + smp_call_function(flush_tlb_page_ipi, (void *)&fd, 1, 1); + } else { + int i; + for (i = 0; i < num_online_cpus(); i++) + if (smp_processor_id() != i) + cpu_context(i, vma->vm_mm) = 0; + } + local_flush_tlb_page(vma, page); + preempt_enable(); +} + +static void flush_tlb_one_ipi(void *info) +{ + struct flush_tlb_data *fd = (struct flush_tlb_data *)info; + local_flush_tlb_one(fd->addr1, fd->addr2); +} + +void flush_tlb_one(unsigned long asid, unsigned long vaddr) +{ + struct flush_tlb_data fd; + + fd.addr1 = asid; + fd.addr2 = vaddr; + + smp_call_function(flush_tlb_one_ipi, (void *)&fd, 1, 1); + local_flush_tlb_one(asid, vaddr); +} diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index 8a545d5..628ec9a 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -173,7 +173,8 @@ static int tmu_timer_init(void) tmu_timer_stop(); -#if !defined(CONFIG_CPU_SUBTYPE_SH7760) && \ +#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && \ + !defined(CONFIG_CPU_SUBTYPE_SH7760) && \ !defined(CONFIG_CPU_SUBTYPE_SH7785) && \ !defined(CONFIG_CPU_SUBTYPE_SHX3) ctrl_outb(TMU_TOCR_INIT, TMU_TOCR); diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index 6701504..dcb46e7 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -807,12 +807,13 @@ static inline void __init gdb_vbr_init(v } #endif -void __init per_cpu_trap_init(void) +void __cpuinit per_cpu_trap_init(void) { extern void *vbr_base; #ifdef CONFIG_SH_STANDARD_BIOS - gdb_vbr_init(); + if (raw_smp_processor_id() == 0) + gdb_vbr_init(); #endif /* NOTE: The VBR value should be at P1 diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 43f3972..a953989 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -2,7 +2,6 @@ # # Processor families # config CPU_SH2 - select SH_WRITETHROUGH if !CPU_SH2A bool config CPU_SH2A @@ -19,6 +18,7 @@ config CPU_SH4 select CPU_HAS_INTEVT select CPU_HAS_SR_RB select CPU_HAS_PTEA if (!CPU_SUBTYPE_ST40 && !CPU_SH4A) || CPU_SHX2 + select CPU_HAS_FPU if !CPU_SH4AL_DSP config CPU_SH4A bool @@ -32,7 +32,6 @@ config CPU_SH4AL_DSP config CPU_SUBTYPE_ST40 bool select CPU_SH4 - select CPU_HAS_INTC2_IRQ config CPU_SHX2 bool @@ -52,26 +51,22 @@ # SH-2 Processor Support config CPU_SUBTYPE_SH7619 bool "Support SH7619 processor" select CPU_SH2 - select CPU_HAS_IPR_IRQ # SH-2A Processor Support config CPU_SUBTYPE_SH7206 bool "Support SH7206 processor" select CPU_SH2A - select CPU_HAS_IPR_IRQ # SH-3 Processor Support config CPU_SUBTYPE_SH7705 bool "Support SH7705 processor" select CPU_SH3 - select CPU_HAS_IPR_IRQ config CPU_SUBTYPE_SH7706 bool "Support SH7706 processor" select CPU_SH3 - select CPU_HAS_IPR_IRQ help Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU. @@ -91,14 +86,12 @@ config CPU_SUBTYPE_SH7708 config CPU_SUBTYPE_SH7709 bool "Support SH7709 processor" select CPU_SH3 - select CPU_HAS_IPR_IRQ help Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU. config CPU_SUBTYPE_SH7710 bool "Support SH7710 processor" select CPU_SH3 - select CPU_HAS_IPR_IRQ select CPU_HAS_DSP help Select SH7710 if you have a SH3-DSP SH7710 CPU. @@ -106,24 +99,28 @@ config CPU_SUBTYPE_SH7710 config CPU_SUBTYPE_SH7712 bool "Support SH7712 processor" select CPU_SH3 - select CPU_HAS_IPR_IRQ select CPU_HAS_DSP help Select SH7712 if you have a SH3-DSP SH7712 CPU. +config CPU_SUBTYPE_SH7720 + bool "Support SH7720 processor" + select CPU_SH3 + select CPU_HAS_DSP + help + Select SH7720 if you have a SH3-DSP SH7720 CPU. + # SH-4 Processor Support config CPU_SUBTYPE_SH7750 bool "Support SH7750 processor" select CPU_SH4 - select CPU_HAS_INTC_IRQ help Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU. config CPU_SUBTYPE_SH7091 bool "Support SH7091 processor" select CPU_SH4 - select CPU_HAS_INTC_IRQ help Select SH7091 if you have an SH-4 based Sega device (such as the Dreamcast, Naomi, and Naomi 2). @@ -131,17 +128,14 @@ config CPU_SUBTYPE_SH7091 config CPU_SUBTYPE_SH7750R bool "Support SH7750R processor" select CPU_SH4 - select CPU_HAS_INTC_IRQ config CPU_SUBTYPE_SH7750S bool "Support SH7750S processor" select CPU_SH4 - select CPU_HAS_INTC_IRQ config CPU_SUBTYPE_SH7751 bool "Support SH7751 processor" select CPU_SH4 - select CPU_HAS_INTC_IRQ help Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU, or if you have a HD6417751R CPU. @@ -149,13 +143,10 @@ config CPU_SUBTYPE_SH7751 config CPU_SUBTYPE_SH7751R bool "Support SH7751R processor" select CPU_SH4 - select CPU_HAS_INTC_IRQ config CPU_SUBTYPE_SH7760 bool "Support SH7760 processor" select CPU_SH4 - select CPU_HAS_INTC2_IRQ - select CPU_HAS_IPR_IRQ config CPU_SUBTYPE_SH4_202 bool "Support SH4-202 processor" @@ -185,19 +176,21 @@ config CPU_SUBTYPE_SH7770 config CPU_SUBTYPE_SH7780 bool "Support SH7780 processor" select CPU_SH4A - select CPU_HAS_INTC_IRQ config CPU_SUBTYPE_SH7785 bool "Support SH7785 processor" select CPU_SH4A select CPU_SHX2 - select CPU_HAS_INTC2_IRQ + select ARCH_SPARSEMEM_ENABLE + select SYS_SUPPORTS_NUMA config CPU_SUBTYPE_SHX3 bool "Support SH-X3 processor" select CPU_SH4A select CPU_SHX3 - select CPU_HAS_INTC2_IRQ + select ARCH_SPARSEMEM_ENABLE + select SYS_SUPPORTS_NUMA + select SYS_SUPPORTS_SMP # SH4AL-DSP Processor Support @@ -209,7 +202,6 @@ config CPU_SUBTYPE_SH7722 bool "Support SH7722 processor" select CPU_SH4AL_DSP select CPU_SHX2 - select CPU_HAS_INTC_IRQ select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_NUMA @@ -307,6 +299,7 @@ config NUMA config NODES_SHIFT int + default "3" if CPU_SUBTYPE_SHX3 default "1" depends on NEED_MULTIPLE_NODES @@ -323,6 +316,7 @@ config ARCH_SPARSEMEM_DEFAULT config MAX_ACTIVE_REGIONS int + default "6" if (CPU_SUBTYPE_SHX3 && SPARSEMEM) default "2" if (CPU_SUBTYPE_SH7722 && SPARSEMEM) default "1" @@ -412,8 +406,17 @@ config SH_DIRECT_MAPPED Turn this option off for platforms that do not have a direct-mapped cache, and you have no need to run the caches in such a configuration. -config SH_WRITETHROUGH - bool "Use write-through caching" +choice + prompt "Cache mode" + default CACHE_WRITEBACK if CPU_SH2A || CPU_SH3 || CPU_SH4 + default CACHE_WRITETHROUGH if (CPU_SH2 && !CPU_SH2A) + +config CACHE_WRITEBACK + bool "Write-back" + depends on CPU_SH2A || CPU_SH3 || CPU_SH4 + +config CACHE_WRITETHROUGH + bool "Write-through" help Selecting this option will configure the caches in write-through mode, as opposed to the default write-back configuration. @@ -424,4 +427,9 @@ config SH_WRITETHROUGH If unsure, say N. +config CACHE_OFF + bool "Off" + +endchoice + endmenu diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile index 4061e89..6fbca50 100644 --- a/arch/sh/mm/Makefile +++ b/arch/sh/mm/Makefile @@ -4,9 +4,12 @@ # obj-y := init.o extable.o consistent.o -obj-$(CONFIG_CPU_SH2) += cache-sh2.o -obj-$(CONFIG_CPU_SH3) += cache-sh3.o -obj-$(CONFIG_CPU_SH4) += cache-sh4.o +ifndef CONFIG_CACHE_OFF +obj-$(CONFIG_CPU_SH2) += cache-sh2.o +obj-$(CONFIG_CPU_SH3) += cache-sh3.o +obj-$(CONFIG_CPU_SH4) += cache-sh4.o +obj-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o +endif mmu-y := tlb-nommu.o pg-nommu.o mmu-$(CONFIG_CPU_SH3) += fault-nommu.o @@ -17,16 +20,18 @@ mmu-$(CONFIG_MMU) := fault.o clear_page. obj-y += $(mmu-y) ifdef CONFIG_DEBUG_FS -obj-$(CONFIG_CPU_SH4) += cache-debugfs.o +obj-$(CONFIG_CPU_SH4) += cache-debugfs.o endif ifdef CONFIG_MMU -obj-$(CONFIG_CPU_SH3) += tlb-sh3.o -obj-$(CONFIG_CPU_SH4) += tlb-sh4.o pg-sh4.o -obj-$(CONFIG_SH7705_CACHE_32KB) += pg-sh7705.o +obj-$(CONFIG_CPU_SH3) += tlb-sh3.o +obj-$(CONFIG_CPU_SH4) += tlb-sh4.o +ifndef CONFIG_CACHE_OFF +obj-$(CONFIG_CPU_SH4) += pg-sh4.o +obj-$(CONFIG_SH7705_CACHE_32KB) += pg-sh7705.o +endif endif obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o -obj-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o obj-$(CONFIG_32BIT) += pmb.o obj-$(CONFIG_NUMA) += numa.o diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c index de6d2c9..9c1b4ad 100644 --- a/arch/sh/mm/cache-debugfs.c +++ b/arch/sh/mm/cache-debugfs.c @@ -144,4 +144,4 @@ static int __init cache_debugfs_init(voi } module_init(cache_debugfs_init); -MODULE_LICENSE("GPL v2"); +MODULE_LICENSE("GPLv2"); diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c index 8648632..bbc2264 100644 --- a/arch/sh/mm/cache-sh4.c +++ b/arch/sh/mm/cache-sh4.c @@ -54,21 +54,21 @@ static void __init emit_cache_params(voi ctrl_inl(CCN_CVR), ctrl_inl(CCN_PRR)); printk("I-cache : n_ways=%d n_sets=%d way_incr=%d\n", - current_cpu_data.icache.ways, - current_cpu_data.icache.sets, - current_cpu_data.icache.way_incr); + boot_cpu_data.icache.ways, + boot_cpu_data.icache.sets, + boot_cpu_data.icache.way_incr); printk("I-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n", - current_cpu_data.icache.entry_mask, - current_cpu_data.icache.alias_mask, - current_cpu_data.icache.n_aliases); + boot_cpu_data.icache.entry_mask, + boot_cpu_data.icache.alias_mask, + boot_cpu_data.icache.n_aliases); printk("D-cache : n_ways=%d n_sets=%d way_incr=%d\n", - current_cpu_data.dcache.ways, - current_cpu_data.dcache.sets, - current_cpu_data.dcache.way_incr); + boot_cpu_data.dcache.ways, + boot_cpu_data.dcache.sets, + boot_cpu_data.dcache.way_incr); printk("D-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n", - current_cpu_data.dcache.entry_mask, - current_cpu_data.dcache.alias_mask, - current_cpu_data.dcache.n_aliases); + boot_cpu_data.dcache.entry_mask, + boot_cpu_data.dcache.alias_mask, + boot_cpu_data.dcache.n_aliases); if (!__flush_dcache_segment_fn) panic("unknown number of cache ways\n"); @@ -79,10 +79,10 @@ static void __init emit_cache_params(voi */ void __init p3_cache_init(void) { - compute_alias(¤t_cpu_data.icache); - compute_alias(¤t_cpu_data.dcache); + compute_alias(&boot_cpu_data.icache); + compute_alias(&boot_cpu_data.dcache); - switch (current_cpu_data.dcache.ways) { + switch (boot_cpu_data.dcache.ways) { case 1: __flush_dcache_segment_fn = __flush_dcache_segment_1way; break; @@ -187,13 +187,13 @@ void flush_cache_sigtramp(unsigned long : "m" (__m(v))); index = CACHE_IC_ADDRESS_ARRAY | - (v & current_cpu_data.icache.entry_mask); + (v & boot_cpu_data.icache.entry_mask); local_irq_save(flags); jump_to_P2(); - for (i = 0; i < current_cpu_data.icache.ways; - i++, index += current_cpu_data.icache.way_incr) + for (i = 0; i < boot_cpu_data.icache.ways; + i++, index += boot_cpu_data.icache.way_incr) ctrl_outl(0, index); /* Clear out Valid-bit */ back_to_P1(); @@ -210,7 +210,7 @@ static inline void flush_cache_4096(unsi * All types of SH-4 require PC to be in P2 to operate on the I-cache. * Some types of SH-4 require PC to be in P2 to operate on the D-cache. */ - if ((current_cpu_data.flags & CPU_HAS_P2_FLUSH_BUG) || + if ((boot_cpu_data.flags & CPU_HAS_P2_FLUSH_BUG) || (start < CACHE_OC_ADDRESS_ARRAY)) exec_offset = 0x20000000; @@ -232,7 +232,7 @@ void flush_dcache_page(struct page *page int i, n; /* Loop all the D-cache */ - n = current_cpu_data.dcache.n_aliases; + n = boot_cpu_data.dcache.n_aliases; for (i = 0; i < n; i++, addr += 4096) flush_cache_4096(addr, phys); } @@ -264,7 +264,7 @@ static inline void flush_icache_all(void void flush_dcache_all(void) { - (*__flush_dcache_segment_fn)(0UL, current_cpu_data.dcache.way_size); + (*__flush_dcache_segment_fn)(0UL, boot_cpu_data.dcache.way_size); wmb(); } @@ -278,8 +278,8 @@ static void __flush_cache_mm(struct mm_s unsigned long end) { unsigned long d = 0, p = start & PAGE_MASK; - unsigned long alias_mask = current_cpu_data.dcache.alias_mask; - unsigned long n_aliases = current_cpu_data.dcache.n_aliases; + unsigned long alias_mask = boot_cpu_data.dcache.alias_mask; + unsigned long n_aliases = boot_cpu_data.dcache.n_aliases; unsigned long select_bit; unsigned long all_aliases_mask; unsigned long addr_offset; @@ -366,7 +366,7 @@ void flush_cache_mm(struct mm_struct *mm * If cache is only 4k-per-way, there are never any 'aliases'. Since * the cache is physically tagged, the data can just be left in there. */ - if (current_cpu_data.dcache.n_aliases == 0) + if (boot_cpu_data.dcache.n_aliases == 0) return; /* @@ -403,7 +403,7 @@ void flush_cache_page(struct vm_area_str unsigned long phys = pfn << PAGE_SHIFT; unsigned int alias_mask; - alias_mask = current_cpu_data.dcache.alias_mask; + alias_mask = boot_cpu_data.dcache.alias_mask; /* We only need to flush D-cache when we have alias */ if ((address^phys) & alias_mask) { @@ -417,7 +417,7 @@ void flush_cache_page(struct vm_area_str phys); } - alias_mask = current_cpu_data.icache.alias_mask; + alias_mask = boot_cpu_data.icache.alias_mask; if (vma->vm_flags & VM_EXEC) { /* * Evict entries from the portion of the cache from which code @@ -449,7 +449,7 @@ void flush_cache_range(struct vm_area_st * If cache is only 4k-per-way, there are never any 'aliases'. Since * the cache is physically tagged, the data can just be left in there. */ - if (current_cpu_data.dcache.n_aliases == 0) + if (boot_cpu_data.dcache.n_aliases == 0) return; /* @@ -510,7 +510,7 @@ static void __flush_cache_4096(unsigned unsigned long a, ea, p; unsigned long temp_pc; - dcache = ¤t_cpu_data.dcache; + dcache = &boot_cpu_data.dcache; /* Write this way for better assembly. */ way_count = dcache->ways; way_incr = dcache->way_incr; @@ -585,7 +585,7 @@ static void __flush_dcache_segment_1way( base_addr = ((base_addr >> 16) << 16); base_addr |= start; - dcache = ¤t_cpu_data.dcache; + dcache = &boot_cpu_data.dcache; linesz = dcache->linesz; way_incr = dcache->way_incr; way_size = dcache->way_size; @@ -627,7 +627,7 @@ static void __flush_dcache_segment_2way( base_addr = ((base_addr >> 16) << 16); base_addr |= start; - dcache = ¤t_cpu_data.dcache; + dcache = &boot_cpu_data.dcache; linesz = dcache->linesz; way_incr = dcache->way_incr; way_size = dcache->way_size; @@ -686,7 +686,7 @@ static void __flush_dcache_segment_4way( base_addr = ((base_addr >> 16) << 16); base_addr |= start; - dcache = ¤t_cpu_data.dcache; + dcache = &boot_cpu_data.dcache; linesz = dcache->linesz; way_incr = dcache->way_incr; way_size = dcache->way_size; diff --git a/arch/sh/mm/fault-nommu.c b/arch/sh/mm/fault-nommu.c index c6f5b51..c7217c3 100644 --- a/arch/sh/mm/fault-nommu.c +++ b/arch/sh/mm/fault-nommu.c @@ -12,6 +12,7 @@ #include #include #include #include +#include #include #include #include diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c index a08a4a9..7d43758 100644 --- a/arch/sh/mm/pmb.c +++ b/arch/sh/mm/pmb.c @@ -145,7 +145,7 @@ repeat: ctrl_outl(vpn | PMB_V, mk_pmb_addr(pos)); -#ifdef CONFIG_SH_WRITETHROUGH +#ifdef CONFIG_CACHE_WRITETHROUGH /* * When we are in 32-bit address extended mode, CCR.CB becomes * invalid, so care must be taken to manually adjust cacheable diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c index f74cf66..2d1dd60 100644 --- a/arch/sh/mm/tlb-sh4.c +++ b/arch/sh/mm/tlb-sh4.c @@ -4,27 +4,14 @@ * SH-4 specific TLB operations * * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2002 Paul Mundt + * Copyright (C) 2002 - 2007 Paul Mundt * * Released under the terms of the GNU GPL v2.0. */ -#include -#include #include -#include -#include -#include -#include -#include #include -#include -#include -#include - +#include #include -#include -#include -#include #include #include @@ -34,22 +21,27 @@ void update_mmu_cache(struct vm_area_str unsigned long flags; unsigned long pteval; unsigned long vpn; - struct page *page; - unsigned long pfn; /* Ptrace may call this routine. */ if (vma && current->active_mm != vma->vm_mm) return; - pfn = pte_pfn(pte); - if (pfn_valid(pfn)) { - page = pfn_to_page(pfn); - if (!test_bit(PG_mapped, &page->flags)) { - unsigned long phys = pte_val(pte) & PTE_PHYS_MASK; - __flush_wback_region((void *)P1SEGADDR(phys), PAGE_SIZE); - __set_bit(PG_mapped, &page->flags); +#ifndef CONFIG_CACHE_OFF + { + unsigned long pfn = pte_pfn(pte); + + if (pfn_valid(pfn)) { + struct page *page = pfn_to_page(pfn); + + if (!test_bit(PG_mapped, &page->flags)) { + unsigned long phys = pte_val(pte) & PTE_PHYS_MASK; + __flush_wback_region((void *)P1SEGADDR(phys), + PAGE_SIZE); + __set_bit(PG_mapped, &page->flags); + } } } +#endif local_irq_save(flags); @@ -57,16 +49,26 @@ void update_mmu_cache(struct vm_area_str vpn = (address & MMU_VPN_MASK) | get_asid(); ctrl_outl(vpn, MMU_PTEH); - pteval = pte_val(pte); + pteval = pte.pte_low; /* Set PTEA register */ +#ifdef CONFIG_X2TLB + /* + * For the extended mode TLB this is trivial, only the ESZ and + * EPR bits need to be written out to PTEA, with the remainder of + * the protection bits (with the exception of the compat-mode SZ + * and PR bits, which are cleared) being written out in PTEL. + */ + ctrl_outl(pte.pte_high, MMU_PTEA); +#else if (cpu_data->flags & CPU_HAS_PTEA) /* TODO: make this look less hacky */ ctrl_outl(((pteval >> 28) & 0xe) | (pteval & 0x1), MMU_PTEA); +#endif /* Set PTEL register */ pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */ -#ifdef CONFIG_SH_WRITETHROUGH +#ifdef CONFIG_CACHE_WRITETHROUGH pteval |= _PAGE_WT; #endif /* conveniently, we want all the software flags to be 0 anyway */ @@ -93,4 +95,3 @@ void local_flush_tlb_one(unsigned long a ctrl_outl(data, addr); back_to_P1(); } - diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c index 93ee05e..78277a1 100644 --- a/drivers/rtc/rtc-sh.c +++ b/drivers/rtc/rtc-sh.c @@ -1,7 +1,7 @@ /* * SuperH On-Chip RTC Support * - * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2006, 2007 Paul Mundt * Copyright (C) 2006 Jamie Lenehan * * Based on the old arch/sh/kernel/cpu/rtc.c by: @@ -23,16 +23,19 @@ #include #include #include #include +#include #define DRV_NAME "sh-rtc" -#define DRV_VERSION "0.1.2" +#define DRV_VERSION "0.1.3" #ifdef CONFIG_CPU_SH3 #define rtc_reg_size sizeof(u16) #define RTC_BIT_INVERTED 0 /* No bug on SH7708, SH7709A */ +#define RTC_DEF_CAPABILITIES 0UL #elif defined(CONFIG_CPU_SH4) #define rtc_reg_size sizeof(u32) #define RTC_BIT_INVERTED 0x40 /* bug on SH7750, SH7750S */ +#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR #endif #define RTC_REG(r) ((r) * rtc_reg_size) @@ -80,6 +83,7 @@ struct sh_rtc { struct rtc_device *rtc_dev; spinlock_t lock; int rearm_aie; + unsigned long capabilities; /* See asm-sh/rtc.h for cap bits */ }; static irqreturn_t sh_rtc_interrupt(int irq, void *dev_id) @@ -319,14 +323,14 @@ static int sh_rtc_read_time(struct devic tm->tm_mday = BCD2BIN(readb(rtc->regbase + RDAYCNT)); tm->tm_mon = BCD2BIN(readb(rtc->regbase + RMONCNT)) - 1; -#if defined(CONFIG_CPU_SH4) - yr = readw(rtc->regbase + RYRCNT); - yr100 = BCD2BIN(yr >> 8); - yr &= 0xff; -#else - yr = readb(rtc->regbase + RYRCNT); - yr100 = BCD2BIN((yr == 0x99) ? 0x19 : 0x20); -#endif + if (rtc->capabilities & RTC_CAP_4_DIGIT_YEAR) { + yr = readw(rtc->regbase + RYRCNT); + yr100 = BCD2BIN(yr >> 8); + yr &= 0xff; + } else { + yr = readb(rtc->regbase + RYRCNT); + yr100 = BCD2BIN((yr == 0x99) ? 0x19 : 0x20); + } tm->tm_year = (yr100 * 100 + BCD2BIN(yr)) - 1900; @@ -375,14 +379,14 @@ static int sh_rtc_set_time(struct device writeb(BIN2BCD(tm->tm_mday), rtc->regbase + RDAYCNT); writeb(BIN2BCD(tm->tm_mon + 1), rtc->regbase + RMONCNT); -#ifdef CONFIG_CPU_SH3 - year = tm->tm_year % 100; - writeb(BIN2BCD(year), rtc->regbase + RYRCNT); -#else - year = (BIN2BCD((tm->tm_year + 1900) / 100) << 8) | - BIN2BCD(tm->tm_year % 100); - writew(year, rtc->regbase + RYRCNT); -#endif + if (rtc->capabilities & RTC_CAP_4_DIGIT_YEAR) { + year = (BIN2BCD((tm->tm_year + 1900) / 100) << 8) | + BIN2BCD(tm->tm_year % 100); + writew(year, rtc->regbase + RYRCNT); + } else { + year = tm->tm_year % 100; + writeb(BIN2BCD(year), rtc->regbase + RYRCNT); + } /* Start RTC */ tmp = readb(rtc->regbase + RCR2); @@ -589,6 +593,17 @@ static int __devinit sh_rtc_probe(struct goto err_badmap; } + rtc->capabilities = RTC_DEF_CAPABILITIES; + if (pdev->dev.platform_data) { + struct sh_rtc_platform_info *pinfo = pdev->dev.platform_data; + + /* + * Some CPUs have special capabilities in addition to the + * default set. Add those in here. + */ + rtc->capabilities |= pinfo->capabilities; + } + platform_set_drvdata(pdev, rtc); return 0; diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 053fca4..73440e2 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -4,6 +4,7 @@ * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO) * * Copyright (C) 2002 - 2006 Paul Mundt + * Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007). * * based off of the old drivers/char/sh-sci.c by: * @@ -301,6 +302,38 @@ static void sci_init_pins_scif(struct ua } sci_out(port, SCFCR, fcr_val); } +#elif defined(CONFIG_CPU_SUBTYPE_SH7720) +static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) +{ + unsigned int fcr_val = 0; + unsigned short data; + + if (cflag & CRTSCTS) { + /* enable RTS/CTS */ + if (port->mapbase == 0xa4430000) { /* SCIF0 */ + /* Clear PTCR bit 9-2; enable all scif pins but sck */ + data = ctrl_inw(PORT_PTCR); + ctrl_outw((data & 0xfc03), PORT_PTCR); + } else if (port->mapbase == 0xa4438000) { /* SCIF1 */ + /* Clear PVCR bit 9-2 */ + data = ctrl_inw(PORT_PVCR); + ctrl_outw((data & 0xfc03), PORT_PVCR); + } + fcr_val |= SCFCR_MCE; + } else { + if (port->mapbase == 0xa4430000) { /* SCIF0 */ + /* Clear PTCR bit 5-2; enable only tx and rx */ + data = ctrl_inw(PORT_PTCR); + ctrl_outw((data & 0xffc3), PORT_PTCR); + } else if (port->mapbase == 0xa4438000) { /* SCIF1 */ + /* Clear PVCR bit 5-2 */ + data = ctrl_inw(PORT_PVCR); + ctrl_outw((data & 0xffc3), PORT_PVCR); + } + } + sci_out(port, SCFCR, fcr_val); +} + #elif defined(CONFIG_CPU_SH3) /* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) @@ -1276,7 +1309,7 @@ static int __init sci_console_init(void) console_initcall(sci_console_init); #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ -#ifdef CONFIG_SH_KGDB +#ifdef CONFIG_SH_KGDB_CONSOLE /* * FIXME: Most of this can go away.. at the moment, we rely on * arch/sh/kernel/setup.c to do the command line parsing for kgdb, though @@ -1334,9 +1367,7 @@ int __init kgdb_console_setup(struct con return uart_set_options(port, co, baud, parity, bits, flow); } -#endif /* CONFIG_SH_KGDB */ -#ifdef CONFIG_SH_KGDB_CONSOLE static struct console kgdb_console = { .name = "ttySC", .device = uart_console_device, @@ -1432,7 +1463,7 @@ #endif #ifdef CONFIG_CPU_FREQ cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER); - dev_info(&dev->dev, "sci: CPU frequency notifier registered\n"); + dev_info(&dev->dev, "CPU frequency notifier registered\n"); #endif #ifdef CONFIG_SH_STANDARD_BIOS diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index cf75466..e89ae29 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -10,19 +10,19 @@ * Modified to support SH7300(SH-Mobile) SCIF. Takashi Kusuda (Jun 2003). * Modified to support H8/300 Series Yoshinori Sato (Feb 2004). * Removed SH7300 support (Jul 2007). + * Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Aug 2007). */ #include #include -#if defined(__H8300H__) || defined(__H8300S__) #include + #if defined(CONFIG_H83007) || defined(CONFIG_H83068) #include #endif #if defined(CONFIG_H8S2678) #include #endif -#endif #if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ defined(CONFIG_CPU_SUBTYPE_SH7707) || \ @@ -46,6 +46,10 @@ # define SCPDR 0xA4000136 */ # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0 # define SCIF_ONLY +#elif defined(CONFIG_CPU_SUBTYPE_SH7720) +# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ +# define SCIF_ONLY +#define SCIF_ORER 0x0200 /* overrun error bit */ #elif defined(CONFIG_SH_RTS7751R2D) # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ @@ -217,7 +221,8 @@ #define SCIF_PER 0x0004 /* 7705 SCIF, #define SCIF_RDF 0x0002 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ #define SCIF_DR 0x0001 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#if defined(CONFIG_CPU_SUBTYPE_SH7705) +#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) #define SCIF_ORER 0x0200 #define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER) #define SCIF_RFDC_MASK 0x007f @@ -254,7 +259,8 @@ #endif # define SCxSR_FER(port) SCIF_FER # define SCxSR_PER(port) SCIF_PER # define SCxSR_BRK(port) SCIF_BRK -#if defined(CONFIG_CPU_SUBTYPE_SH7705) +#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) # define SCxSR_RDxF_CLEAR(port) (sci_in(port,SCxSR)&0xfffc) # define SCxSR_ERROR_CLEAR(port) (sci_in(port,SCxSR)&0xfd73) # define SCxSR_TDxE_CLEAR(port) (sci_in(port,SCxSR)&0xffdf) @@ -362,7 +368,8 @@ #define SCIx_FNS(name, sh3_sci_offset, s CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size) #define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) -#elif defined(CONFIG_CPU_SUBTYPE_SH7705) +#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) #define SCIF_FNS(name, scif_offset, scif_size) \ CPU_SCIF_FNS(name, scif_offset, scif_size) #else @@ -388,7 +395,8 @@ #define SCIF_FNS(name, sh3_scif_offset, CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) #endif -#if defined(CONFIG_CPU_SUBTYPE_SH7705) +#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) SCIF_FNS(SCSMR, 0x00, 16) SCIF_FNS(SCBRR, 0x04, 8) @@ -510,7 +518,15 @@ static inline void set_sh771x_scif_pfc(s return; } } - +#elif defined(CONFIG_CPU_SUBTYPE_SH7720) +static inline int sci_rxd_in(struct uart_port *port) +{ + if (port->mapbase == 0xa4430000) + return sci_in(port, SCxSR) & 0x0003 ? 1 : 0; + else if (port->mapbase == 0xa4438000) + return sci_in(port, SCxSR) & 0x0003 ? 1 : 0; + return 1; +} #elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ defined(CONFIG_CPU_SUBTYPE_SH7751) || \ defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ @@ -653,6 +669,7 @@ static inline int sci_rxd_in(struct uart return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffc60000) return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return 1; } #endif @@ -691,7 +708,8 @@ #endif #if defined(CONFIG_CPU_SUBTYPE_SH7780) || \ defined(CONFIG_CPU_SUBTYPE_SH7785) #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1) -#elif defined(CONFIG_CPU_SUBTYPE_SH7705) +#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) #define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) #elif defined(__H8300H__) || defined(__H8300S__) #define SCBRR_VALUE(bps) (((CONFIG_CPU_CLOCK*1000/32)/bps)-1) diff --git a/drivers/sh/Makefile b/drivers/sh/Makefile index 8a14389..a96f4a8 100644 --- a/drivers/sh/Makefile +++ b/drivers/sh/Makefile @@ -2,5 +2,5 @@ # # Makefile for the SuperH specific drivers. # -obj-$(CONFIG_SUPERHYWAY) += superhyway/ - +obj-$(CONFIG_SUPERHYWAY) += superhyway/ +obj-$(CONFIG_MAPLE) += maple/ diff --git a/drivers/sh/maple/Makefile b/drivers/sh/maple/Makefile new file mode 100644 index 0000000..65dfeeb --- /dev/null +++ b/drivers/sh/maple/Makefile @@ -0,0 +1,3 @@ +# Makefile for Maple Bus + +obj-$(CONFIG_MAPLE) := maple.o diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c new file mode 100644 index 0000000..161d102 --- /dev/null +++ b/drivers/sh/maple/maple.c @@ -0,0 +1,735 @@ +/* + * Core maple bus functionality + * + * Copyright (C) 2007 Adrian McMenamin + * + * Based on 2.4 code by: + * + * Copyright (C) 2000-2001 YAEGASHI Takeshi + * Copyright (C) 2001 M. R. Brown + * Copyright (C) 2001 Paul Mundt + * + * and others. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_AUTHOR("Yaegshi Takeshi, Paul Mundt, M.R. Brown, Adrian McMenamin"); +MODULE_DESCRIPTION("Maple bus driver for Dreamcast"); +MODULE_LICENSE("GPL v2"); +MODULE_SUPPORTED_DEVICE("{{SEGA, Dreamcast/Maple}}"); + +static void maple_dma_handler(struct work_struct *work); +static void maple_vblank_handler(struct work_struct *work); + +static DECLARE_WORK(maple_dma_process, maple_dma_handler); +static DECLARE_WORK(maple_vblank_process, maple_vblank_handler); + +static LIST_HEAD(maple_waitq); +static LIST_HEAD(maple_sentq); + +static DEFINE_MUTEX(maple_list_lock); + +static struct maple_driver maple_dummy_driver; +static struct device maple_bus; +static int subdevice_map[MAPLE_PORTS]; +static unsigned long *maple_sendbuf, *maple_sendptr, *maple_lastptr; +static unsigned long maple_pnp_time; +static int started, scanning, liststatus; +static struct kmem_cache *maple_queue_cache; + +struct maple_device_specify { + int port; + int unit; +}; + +/** + * maple_driver_register - register a device driver + * automatically makes the driver bus a maple bus + * @drv: the driver to be registered + */ +int maple_driver_register(struct device_driver *drv) +{ + if (!drv) + return -EINVAL; + drv->bus = &maple_bus_type; + return driver_register(drv); +} +EXPORT_SYMBOL_GPL(maple_driver_register); + +/* set hardware registers to enable next round of dma */ +static void maplebus_dma_reset(void) +{ + ctrl_outl(MAPLE_MAGIC, MAPLE_RESET); + /* set trig type to 0 for software trigger, 1 for hardware (VBLANK) */ + ctrl_outl(1, MAPLE_TRIGTYPE); + ctrl_outl(MAPLE_2MBPS | MAPLE_TIMEOUT(50000), MAPLE_SPEED); + ctrl_outl(PHYSADDR(maple_sendbuf), MAPLE_DMAADDR); + ctrl_outl(1, MAPLE_ENABLE); +} + +/** + * maple_getcond_callback - setup handling MAPLE_COMMAND_GETCOND + * @dev: device responding + * @callback: handler callback + * @interval: interval in jiffies between callbacks + * @function: the function code for the device + */ +void maple_getcond_callback(struct maple_device *dev, + void (*callback) (struct mapleq * mq), + unsigned long interval, unsigned long function) +{ + dev->callback = callback; + dev->interval = interval; + dev->function = cpu_to_be32(function); + dev->when = jiffies; +} +EXPORT_SYMBOL_GPL(maple_getcond_callback); + +static int maple_dma_done(void) +{ + return (ctrl_inl(MAPLE_STATE) & 1) == 0; +} + +static void maple_release_device(struct device *dev) +{ + if (dev->type) { + kfree(dev->type->name); + kfree(dev->type); + } +} + +/** + * maple_add_packet - add a single instruction to the queue + * @mq: instruction to add to waiting queue + */ +void maple_add_packet(struct mapleq *mq) +{ + mutex_lock(&maple_list_lock); + list_add(&mq->list, &maple_waitq); + mutex_unlock(&maple_list_lock); +} +EXPORT_SYMBOL_GPL(maple_add_packet); + +static struct mapleq *maple_allocq(struct maple_device *dev) +{ + struct mapleq *mq; + + mq = kmalloc(sizeof(*mq), GFP_KERNEL); + if (!mq) + return NULL; + + mq->dev = dev; + mq->recvbufdcsp = kmem_cache_zalloc(maple_queue_cache, GFP_KERNEL); + mq->recvbuf = (void *) P2SEGADDR(mq->recvbufdcsp); + if (!mq->recvbuf) { + kfree(mq); + return NULL; + } + + return mq; +} + +static struct maple_device *maple_alloc_dev(int port, int unit) +{ + struct maple_device *dev; + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) + return NULL; + + dev->port = port; + dev->unit = unit; + dev->mq = maple_allocq(dev); + + if (!dev->mq) { + kfree(dev); + return NULL; + } + + return dev; +} + +static void maple_free_dev(struct maple_device *mdev) +{ + if (!mdev) + return; + if (mdev->mq) { + kmem_cache_free(maple_queue_cache, mdev->mq->recvbufdcsp); + kfree(mdev->mq); + } + kfree(mdev); +} + +/* process the command queue into a maple command block + * terminating command has bit 32 of first long set to 0 + */ +static void maple_build_block(struct mapleq *mq) +{ + int port, unit, from, to, len; + unsigned long *lsendbuf = mq->sendbuf; + + port = mq->dev->port & 3; + unit = mq->dev->unit; + len = mq->length; + from = port << 6; + to = (port << 6) | (unit > 0 ? (1 << (unit - 1)) & 0x1f : 0x20); + + *maple_lastptr &= 0x7fffffff; + maple_lastptr = maple_sendptr; + + *maple_sendptr++ = (port << 16) | len | 0x80000000; + *maple_sendptr++ = PHYSADDR(mq->recvbuf); + *maple_sendptr++ = + mq->command | (to << 8) | (from << 16) | (len << 24); + + while (len-- > 0) + *maple_sendptr++ = *lsendbuf++; +} + +/* build up command queue */ +static void maple_send(void) +{ + int i; + int maple_packets; + struct mapleq *mq, *nmq; + + if (!list_empty(&maple_sentq)) + return; + if (list_empty(&maple_waitq) || !maple_dma_done()) + return; + maple_packets = 0; + maple_sendptr = maple_lastptr = maple_sendbuf; + list_for_each_entry_safe(mq, nmq, &maple_waitq, list) { + maple_build_block(mq); + list_move(&mq->list, &maple_sentq); + if (maple_packets++ > MAPLE_MAXPACKETS) + break; + } + if (maple_packets > 0) { + for (i = 0; i < (1 << MAPLE_DMA_PAGES); i++) + dma_cache_sync(0, maple_sendbuf + i * PAGE_SIZE, + PAGE_SIZE, DMA_BIDIRECTIONAL); + } +} + +static int attach_matching_maple_driver(struct device_driver *driver, + void *devptr) +{ + struct maple_driver *maple_drv; + struct maple_device *mdev; + + mdev = devptr; + maple_drv = to_maple_driver(driver); + if (mdev->devinfo.function & be32_to_cpu(maple_drv->function)) { + if (maple_drv->connect(mdev) == 0) { + mdev->driver = maple_drv; + return 1; + } + } + return 0; +} + +static void maple_detach_driver(struct maple_device *mdev) +{ + if (!mdev) + return; + if (mdev->driver) { + if (mdev->driver->disconnect) + mdev->driver->disconnect(mdev); + } + mdev->driver = NULL; + if (mdev->registered) { + maple_release_device(&mdev->dev); + device_unregister(&mdev->dev); + } + mdev->registered = 0; + maple_free_dev(mdev); +} + +/* process initial MAPLE_COMMAND_DEVINFO for each device or port */ +static void maple_attach_driver(struct maple_device *dev) +{ + char *p; + + char *recvbuf; + unsigned long function; + int matched, retval; + + recvbuf = dev->mq->recvbuf; + memcpy(&dev->devinfo, recvbuf + 4, sizeof(dev->devinfo)); + memcpy(dev->product_name, dev->devinfo.product_name, 30); + memcpy(dev->product_licence, dev->devinfo.product_licence, 60); + dev->product_name[30] = '\0'; + dev->product_licence[60] = '\0'; + + for (p = dev->product_name + 29; dev->product_name <= p; p--) + if (*p == ' ') + *p = '\0'; + else + break; + + for (p = dev->product_licence + 59; dev->product_licence <= p; p--) + if (*p == ' ') + *p = '\0'; + else + break; + + function = be32_to_cpu(dev->devinfo.function); + + if (function > 0x200) { + /* Do this silently - as not a real device */ + function = 0; + dev->driver = &maple_dummy_driver; + sprintf(dev->dev.bus_id, "%d:0.port", dev->port); + } else { + printk(KERN_INFO + "Maple bus at (%d, %d): Connected function 0x%lX\n", + dev->port, dev->unit, function); + + matched = + bus_for_each_drv(&maple_bus_type, NULL, dev, + attach_matching_maple_driver); + + if (matched == 0) { + /* Driver does not exist yet */ + printk(KERN_INFO + "No maple driver found for this device\n"); + dev->driver = &maple_dummy_driver; + } + + sprintf(dev->dev.bus_id, "%d:0%d.%lX", dev->port, + dev->unit, function); + } + dev->function = function; + dev->dev.bus = &maple_bus_type; + dev->dev.parent = &maple_bus; + dev->dev.release = &maple_release_device; + retval = device_register(&dev->dev); + if (retval) { + printk(KERN_INFO + "Maple bus: Attempt to register device (%x, %x) failed.\n", + dev->port, dev->unit); + maple_free_dev(dev); + } + dev->registered = 1; +} + +/* + * if device has been registered for the given + * port and unit then return 1 - allows identification + * of which devices need to be attached or detached + */ +static int detach_maple_device(struct device *device, void *portptr) +{ + struct maple_device_specify *ds; + struct maple_device *mdev; + + ds = portptr; + mdev = to_maple_dev(device); + if (mdev->port == ds->port && mdev->unit == ds->unit) + return 1; + return 0; +} + +static int setup_maple_commands(struct device *device, void *ignored) +{ + struct maple_device *maple_dev = to_maple_dev(device); + + if ((maple_dev->interval > 0) + && time_after(jiffies, maple_dev->when)) { + maple_dev->when = jiffies + maple_dev->interval; + maple_dev->mq->command = MAPLE_COMMAND_GETCOND; + maple_dev->mq->sendbuf = &maple_dev->function; + maple_dev->mq->length = 1; + maple_add_packet(maple_dev->mq); + liststatus++; + } else { + if (time_after(jiffies, maple_pnp_time)) { + maple_dev->mq->command = MAPLE_COMMAND_DEVINFO; + maple_dev->mq->length = 0; + maple_add_packet(maple_dev->mq); + liststatus++; + } + } + + return 0; +} + +/* VBLANK bottom half - implemented via workqueue */ +static void maple_vblank_handler(struct work_struct *work) +{ + if (!maple_dma_done()) + return; + if (!list_empty(&maple_sentq)) + return; + ctrl_outl(0, MAPLE_ENABLE); + liststatus = 0; + bus_for_each_dev(&maple_bus_type, NULL, NULL, + setup_maple_commands); + if (time_after(jiffies, maple_pnp_time)) + maple_pnp_time = jiffies + MAPLE_PNP_INTERVAL; + if (liststatus && list_empty(&maple_sentq)) { + INIT_LIST_HEAD(&maple_sentq); + maple_send(); + } + maplebus_dma_reset(); +} + +/* handle devices added via hotplugs - placing them on queue for DEVINFO*/ +static void maple_map_subunits(struct maple_device *mdev, int submask) +{ + int retval, k, devcheck; + struct maple_device *mdev_add; + struct maple_device_specify ds; + + for (k = 0; k < 5; k++) { + ds.port = mdev->port; + ds.unit = k + 1; + retval = + bus_for_each_dev(&maple_bus_type, NULL, &ds, + detach_maple_device); + if (retval) { + submask = submask >> 1; + continue; + } + devcheck = submask & 0x01; + if (devcheck) { + mdev_add = maple_alloc_dev(mdev->port, k + 1); + if (!mdev_add) + return; + mdev_add->mq->command = MAPLE_COMMAND_DEVINFO; + mdev_add->mq->length = 0; + maple_add_packet(mdev_add->mq); + scanning = 1; + } + submask = submask >> 1; + } +} + +/* mark a device as removed */ +static void maple_clean_submap(struct maple_device *mdev) +{ + int killbit; + + killbit = (mdev->unit > 0 ? (1 << (mdev->unit - 1)) & 0x1f : 0x20); + killbit = ~killbit; + killbit &= 0xFF; + subdevice_map[mdev->port] = subdevice_map[mdev->port] & killbit; +} + +/* handle empty port or hotplug removal */ +static void maple_response_none(struct maple_device *mdev, + struct mapleq *mq) +{ + if (mdev->unit != 0) { + list_del(&mq->list); + maple_clean_submap(mdev); + printk(KERN_INFO + "Maple bus device detaching at (%d, %d)\n", + mdev->port, mdev->unit); + maple_detach_driver(mdev); + return; + } + if (!started) { + printk(KERN_INFO "No maple devices attached to port %d\n", + mdev->port); + return; + } + maple_clean_submap(mdev); +} + +/* preprocess hotplugs or scans */ +static void maple_response_devinfo(struct maple_device *mdev, + char *recvbuf) +{ + char submask; + if ((!started) || (scanning == 2)) { + maple_attach_driver(mdev); + return; + } + if (mdev->unit == 0) { + submask = recvbuf[2] & 0x1F; + if (submask ^ subdevice_map[mdev->port]) { + maple_map_subunits(mdev, submask); + subdevice_map[mdev->port] = submask; + } + } +} + +/* maple dma end bottom half - implemented via workqueue */ +static void maple_dma_handler(struct work_struct *work) +{ + struct mapleq *mq, *nmq; + struct maple_device *dev; + char *recvbuf; + enum maple_code code; + + if (!maple_dma_done()) + return; + ctrl_outl(0, MAPLE_ENABLE); + if (!list_empty(&maple_sentq)) { + list_for_each_entry_safe(mq, nmq, &maple_sentq, list) { + recvbuf = mq->recvbuf; + code = recvbuf[0]; + dev = mq->dev; + switch (code) { + case MAPLE_RESPONSE_NONE: + maple_response_none(dev, mq); + break; + + case MAPLE_RESPONSE_DEVINFO: + maple_response_devinfo(dev, recvbuf); + break; + + case MAPLE_RESPONSE_DATATRF: + if (dev->callback) + dev->callback(mq); + break; + + case MAPLE_RESPONSE_FILEERR: + case MAPLE_RESPONSE_AGAIN: + case MAPLE_RESPONSE_BADCMD: + case MAPLE_RESPONSE_BADFUNC: + printk(KERN_DEBUG + "Maple non-fatal error 0x%X\n", + code); + break; + + case MAPLE_RESPONSE_ALLINFO: + printk(KERN_DEBUG + "Maple - extended device information not supported\n"); + break; + + case MAPLE_RESPONSE_OK: + break; + + default: + break; + } + } + INIT_LIST_HEAD(&maple_sentq); + if (scanning == 1) { + maple_send(); + scanning = 2; + } else + scanning = 0; + + if (started == 0) + started = 1; + } + maplebus_dma_reset(); +} + +static irqreturn_t maplebus_dma_interrupt(int irq, void *dev_id) +{ + /* Load everything into the bottom half */ + schedule_work(&maple_dma_process); + return IRQ_HANDLED; +} + +static irqreturn_t maplebus_vblank_interrupt(int irq, void *dev_id) +{ + schedule_work(&maple_vblank_process); + return IRQ_HANDLED; +} + +static struct irqaction maple_dma_irq = { + .name = "maple bus DMA handler", + .handler = maplebus_dma_interrupt, + .flags = IRQF_SHARED, +}; + +static struct irqaction maple_vblank_irq = { + .name = "maple bus VBLANK handler", + .handler = maplebus_vblank_interrupt, + .flags = IRQF_SHARED, +}; + +static int maple_set_dma_interrupt_handler(void) +{ + return setup_irq(HW_EVENT_MAPLE_DMA, &maple_dma_irq); +} + +static int maple_set_vblank_interrupt_handler(void) +{ + return setup_irq(HW_EVENT_VSYNC, &maple_vblank_irq); +} + +static int maple_get_dma_buffer(void) +{ + maple_sendbuf = + (void *) __get_free_pages(GFP_KERNEL | __GFP_ZERO, + MAPLE_DMA_PAGES); + if (!maple_sendbuf) + return -ENOMEM; + return 0; +} + +static int match_maple_bus_driver(struct device *devptr, + struct device_driver *drvptr) +{ + struct maple_driver *maple_drv; + struct maple_device *maple_dev; + + maple_drv = container_of(drvptr, struct maple_driver, drv); + maple_dev = container_of(devptr, struct maple_device, dev); + /* Trap empty port case */ + if (maple_dev->devinfo.function == 0xFFFFFFFF) + return 0; + else if (maple_dev->devinfo.function & + be32_to_cpu(maple_drv->function)) + return 1; + return 0; +} + +static int maple_bus_uevent(struct device *dev, char **envp, + int num_envp, char *buffer, int buffer_size) +{ + return 0; +} + +static void maple_bus_release(struct device *dev) +{ +} + +static struct maple_driver maple_dummy_driver = { + .drv = { + .name = "maple_dummy_driver", + .bus = &maple_bus_type, + }, +}; + +struct bus_type maple_bus_type = { + .name = "maple", + .match = match_maple_bus_driver, + .uevent = maple_bus_uevent, +}; +EXPORT_SYMBOL_GPL(maple_bus_type); + +static struct device maple_bus = { + .bus_id = "maple", + .release = maple_bus_release, +}; + +static int __init maple_bus_init(void) +{ + int retval, i; + struct maple_device *mdev[MAPLE_PORTS]; + ctrl_outl(0, MAPLE_STATE); + + retval = device_register(&maple_bus); + if (retval) + goto cleanup; + + retval = bus_register(&maple_bus_type); + if (retval) + goto cleanup_device; + + retval = driver_register(&maple_dummy_driver.drv); + + if (retval) + goto cleanup_bus; + + /* allocate memory for maple bus dma */ + retval = maple_get_dma_buffer(); + if (retval) { + printk(KERN_INFO + "Maple bus: Failed to allocate Maple DMA buffers\n"); + goto cleanup_basic; + } + + /* set up DMA interrupt handler */ + retval = maple_set_dma_interrupt_handler(); + if (retval) { + printk(KERN_INFO + "Maple bus: Failed to grab maple DMA IRQ\n"); + goto cleanup_dma; + } + + /* set up VBLANK interrupt handler */ + retval = maple_set_vblank_interrupt_handler(); + if (retval) { + printk(KERN_INFO "Maple bus: Failed to grab VBLANK IRQ\n"); + goto cleanup_irq; + } + + maple_queue_cache = + kmem_cache_create("maple_queue_cache", 0x400, 0, + SLAB_HWCACHE_ALIGN, NULL); + + if (!maple_queue_cache) + goto cleanup_bothirqs; + + /* setup maple ports */ + for (i = 0; i < MAPLE_PORTS; i++) { + mdev[i] = maple_alloc_dev(i, 0); + if (!mdev[i]) { + while (i-- > 0) + maple_free_dev(mdev[i]); + goto cleanup_cache; + } + mdev[i]->registered = 0; + mdev[i]->mq->command = MAPLE_COMMAND_DEVINFO; + mdev[i]->mq->length = 0; + maple_attach_driver(mdev[i]); + maple_add_packet(mdev[i]->mq); + subdevice_map[i] = 0; + } + + /* setup maplebus hardware */ + maplebus_dma_reset(); + + /* initial detection */ + maple_send(); + + maple_pnp_time = jiffies; + + printk(KERN_INFO "Maple bus core now registered.\n"); + + return 0; + +cleanup_cache: + kmem_cache_destroy(maple_queue_cache); + +cleanup_bothirqs: + free_irq(HW_EVENT_VSYNC, 0); + +cleanup_irq: + free_irq(HW_EVENT_MAPLE_DMA, 0); + +cleanup_dma: + free_pages((unsigned long) maple_sendbuf, MAPLE_DMA_PAGES); + +cleanup_basic: + driver_unregister(&maple_dummy_driver.drv); + +cleanup_bus: + bus_unregister(&maple_bus_type); + +cleanup_device: + device_unregister(&maple_bus); + +cleanup: + printk(KERN_INFO "Maple bus registration failed\n"); + return retval; +} +subsys_initcall(maple_bus_init); diff --git a/drivers/video/backlight/hp680_bl.c b/drivers/video/backlight/hp680_bl.c index 0899fcc..fbea2bd 100644 --- a/drivers/video/backlight/hp680_bl.c +++ b/drivers/video/backlight/hp680_bl.c @@ -125,8 +125,8 @@ static int hp680bl_remove(struct platfor { struct backlight_device *bd = platform_get_drvdata(pdev); - hp680bl_data.brightness = 0; - hp680bl_data.power = 0; + bd->props.brightness = 0; + bd->props.power = 0; hp680bl_send_intensity(bd); backlight_device_unregister(bd); diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c index 7d6c298..13de07f 100644 --- a/drivers/video/pvr2fb.c +++ b/drivers/video/pvr2fb.c @@ -890,7 +890,7 @@ static int __init pvr2fb_dc_init(void) pvr2_fix.mmio_start = 0xa05f8000; /* registers start here */ pvr2_fix.mmio_len = 0x2000; - if (request_irq(HW_EVENT_VSYNC, pvr2fb_interrupt, 0, + if (request_irq(HW_EVENT_VSYNC, pvr2fb_interrupt, IRQF_SHARED, "pvr2 VBL handler", fb_info)) { return -EBUSY; } diff --git a/include/asm-sh/cacheflush.h b/include/asm-sh/cacheflush.h index 07f62ec..aa558da 100644 --- a/include/asm-sh/cacheflush.h +++ b/include/asm-sh/cacheflush.h @@ -1,16 +1,47 @@ #ifndef __ASM_SH_CACHEFLUSH_H #define __ASM_SH_CACHEFLUSH_H + #ifdef __KERNEL__ -#include +#ifdef CONFIG_CACHE_OFF +/* + * Nothing to do when the cache is disabled, initial flush and explicit + * disabling is handled at CPU init time. + * + * See arch/sh/kernel/cpu/init.c:cache_init(). + */ +#define p3_cache_init() do { } while (0) +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_icache_range(start, end) do { } while (0) +#define flush_icache_page(vma,pg) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +#define flush_cache_sigtramp(vaddr) do { } while (0) +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) +#define __flush_wback_region(start, size) do { (void)(start); } while (0) +#define __flush_purge_region(start, size) do { (void)(start); } while (0) +#define __flush_invalidate_region(start, size) do { (void)(start); } while (0) +#else #include +/* + * Consistent DMA requires that the __flush_xxx() primitives must be set + * for any of the enabled non-coherent caches (most of the UP CPUs), + * regardless of PIPT or VIPT cache configurations. + */ + /* Flush (write-back only) a region (smaller than a page) */ extern void __flush_wback_region(void *start, int size); /* Flush (write-back & invalidate) a region (smaller than a page) */ extern void __flush_purge_region(void *start, int size); /* Flush (invalidate only) a region (smaller than a page) */ extern void __flush_invalidate_region(void *start, int size); +#endif #define flush_cache_vmap(start, end) flush_cache_all() #define flush_cache_vunmap(start, end) flush_cache_all() diff --git a/include/asm-sh/cpu-sh3/cache.h b/include/asm-sh/cpu-sh3/cache.h index ffe08d2..255016f 100644 --- a/include/asm-sh/cpu-sh3/cache.h +++ b/include/asm-sh/cpu-sh3/cache.h @@ -26,7 +26,9 @@ #define CACHE_PHYSADDR_MASK 0x1ffffc00 #define CCR_CACHE_ENABLE CCR_CACHE_CE #define CCR_CACHE_INVALIDATE CCR_CACHE_CF -#if defined(CONFIG_CPU_SUBTYPE_SH7705) || defined(CONFIG_CPU_SUBTYPE_SH7710) +#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7710) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) #define CCR3 0xa40000b4 #define CCR_CACHE_16KB 0x00010000 #define CCR_CACHE_32KB 0x00020000 diff --git a/include/asm-sh/cpu-sh3/dma.h b/include/asm-sh/cpu-sh3/dma.h index 3a66dc4..54bfece 100644 --- a/include/asm-sh/cpu-sh3/dma.h +++ b/include/asm-sh/cpu-sh3/dma.h @@ -1,7 +1,20 @@ #ifndef __ASM_CPU_SH3_DMA_H #define __ASM_CPU_SH3_DMA_H + +#if defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7709) +#define SH_DMAC_BASE 0xa4010020 + +#define DMTE0_IRQ 48 +#define DMTE1_IRQ 49 +#define DMTE2_IRQ 50 +#define DMTE3_IRQ 51 +#define DMTE4_IRQ 76 +#define DMTE5_IRQ 77 + +#else #define SH_DMAC_BASE 0xa4000020 +#endif /* Definitions for the SuperH DMAC */ #define TM_BURST 0x00000020 diff --git a/include/asm-sh/cpu-sh3/gpio.h b/include/asm-sh/cpu-sh3/gpio.h new file mode 100644 index 0000000..48770c1 --- /dev/null +++ b/include/asm-sh/cpu-sh3/gpio.h @@ -0,0 +1,66 @@ +/* + * include/asm-sh/cpu-sh3/gpio.h + * + * Copyright (C) 2007 Markus Brunner, Mark Jonas + * + * Addresses for the Pin Function Controller + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef _CPU_SH3_GPIO_H +#define _CPU_SH3_GPIO_H + +#if defined(CONFIG_CPU_SUBTYPE_SH7720) + +/* Control registers */ +#define PORT_PACR 0xA4050100UL +#define PORT_PBCR 0xA4050102UL +#define PORT_PCCR 0xA4050104UL +#define PORT_PDCR 0xA4050106UL +#define PORT_PECR 0xA4050108UL +#define PORT_PFCR 0xA405010AUL +#define PORT_PGCR 0xA405010CUL +#define PORT_PHCR 0xA405010EUL +#define PORT_PJCR 0xA4050110UL +#define PORT_PKCR 0xA4050112UL +#define PORT_PLCR 0xA4050114UL +#define PORT_PMCR 0xA4050116UL +#define PORT_PPCR 0xA4050118UL +#define PORT_PRCR 0xA405011AUL +#define PORT_PSCR 0xA405011CUL +#define PORT_PTCR 0xA405011EUL +#define PORT_PUCR 0xA4050120UL +#define PORT_PVCR 0xA4050122UL + +/* Data registers */ +#define PORT_PADR 0xA4050140UL +/* Address of PORT_PBDR is wrong in the datasheet, see errata 2005-09-21 */ +#define PORT_PBDR 0xA4050142UL +#define PORT_PCDR 0xA4050144UL +#define PORT_PDDR 0xA4050146UL +#define PORT_PEDR 0xA4050148UL +#define PORT_PFDR 0xA405014AUL +#define PORT_PGDR 0xA405014CUL +#define PORT_PHDR 0xA405014EUL +#define PORT_PJDR 0xA4050150UL +#define PORT_PKDR 0xA4050152UL +#define PORT_PLDR 0xA4050154UL +#define PORT_PMDR 0xA4050156UL +#define PORT_PPDR 0xA4050158UL +#define PORT_PRDR 0xA405015AUL +#define PORT_PSDR 0xA405015CUL +#define PORT_PTDR 0xA405015EUL +#define PORT_PUDR 0xA4050160UL +#define PORT_PVDR 0xA4050162UL + +/* Pin Select Registers */ +#define PORT_PSELA 0xA4050124UL +#define PORT_PSELB 0xA4050126UL +#define PORT_PSELC 0xA4050128UL +#define PORT_PSELD 0xA405012AUL + +#endif + +#endif diff --git a/include/asm-sh/cpu-sh3/mmu_context.h b/include/asm-sh/cpu-sh3/mmu_context.h index b20786d..16c2d63 100644 --- a/include/asm-sh/cpu-sh3/mmu_context.h +++ b/include/asm-sh/cpu-sh3/mmu_context.h @@ -27,12 +27,13 @@ #define MMU_CONTROL_INIT 0x007 /* SV=0, #define TRA 0xffffffd0 #define EXPEVT 0xffffffd4 -#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) || \ +#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7706) || \ - defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) || \ + defined(CONFIG_CPU_SUBTYPE_SH7710) || \ defined(CONFIG_CPU_SUBTYPE_SH7712) || \ - defined(CONFIG_CPU_SUBTYPE_SH7710) + defined(CONFIG_CPU_SUBTYPE_SH7720) #define INTEVT 0xa4000000 /* INTEVTE2(0xa4000000) */ #else #define INTEVT 0xffffffd8 diff --git a/include/asm-sh/cpu-sh3/timer.h b/include/asm-sh/cpu-sh3/timer.h index b6c2020..3880ce0 100644 --- a/include/asm-sh/cpu-sh3/timer.h +++ b/include/asm-sh/cpu-sh3/timer.h @@ -23,11 +23,13 @@ #define __ASM_CPU_SH3_TIMER_H * --------------------------------------------------------------------------- */ -#if !defined(CONFIG_CPU_SUBTYPE_SH7727) +#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && \ + !defined(CONFIG_CPU_SUBTYPE_SH7727) #define TMU_TOCR 0xfffffe90 /* Byte access */ #endif -#if defined(CONFIG_CPU_SUBTYPE_SH7710) +#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) #define TMU_012_TSTR 0xa412fe92 /* Byte access */ #define TMU0_TCOR 0xa412fe94 /* Long access */ @@ -56,7 +58,8 @@ #define TMU1_TCR 0xfffffea8 /* Word acce #define TMU2_TCOR 0xfffffeac /* Long access */ #define TMU2_TCNT 0xfffffeb0 /* Long access */ #define TMU2_TCR 0xfffffeb4 /* Word access */ -#if !defined(CONFIG_CPU_SUBTYPE_SH7727) +#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && \ + !defined(CONFIG_CPU_SUBTYPE_SH7727) #define TMU2_TCPR2 0xfffffeb8 /* Long access */ #endif #endif diff --git a/include/asm-sh/cpu-sh3/ubc.h b/include/asm-sh/cpu-sh3/ubc.h index 9d308cb..18467c5 100644 --- a/include/asm-sh/cpu-sh3/ubc.h +++ b/include/asm-sh/cpu-sh3/ubc.h @@ -11,7 +11,8 @@ #ifndef __ASM_CPU_SH3_UBC_H #define __ASM_CPU_SH3_UBC_H -#if defined(CONFIG_CPU_SUBTYPE_SH7710) +#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) #define UBC_BARA 0xa4ffffb0 #define UBC_BAMRA 0xa4ffffb4 #define UBC_BBRA 0xa4ffffb8 diff --git a/include/asm-sh/cpu-sh4/mmu_context.h b/include/asm-sh/cpu-sh4/mmu_context.h index ff4c5fb..979acdd 100644 --- a/include/asm-sh/cpu-sh4/mmu_context.h +++ b/include/asm-sh/cpu-sh4/mmu_context.h @@ -22,13 +22,21 @@ #define MMU_ITLB_ADDRESS_ARRAY 0xF200000 #define MMU_UTLB_ADDRESS_ARRAY 0xF6000000 #define MMU_PAGE_ASSOC_BIT 0x80 -#define MMU_NTLB_ENTRIES 64 /* for 7750 */ +#ifdef CONFIG_X2TLB +#define MMUCR_ME (1 << 7) +#else +#define MMUCR_ME (0) +#endif + #ifdef CONFIG_SH_STORE_QUEUES -#define MMU_CONTROL_INIT 0x05 /* SQMD=0, SV=0, TI=1, AT=1 */ +#define MMUCR_SQMD (1 << 9) #else -#define MMU_CONTROL_INIT 0x205 /* SQMD=1, SV=0, TI=1, AT=1 */ +#define MMUCR_SQMD (0) #endif +#define MMU_NTLB_ENTRIES 64 +#define MMU_CONTROL_INIT (0x05|MMUCR_SQMD|MMUCR_ME) + #define MMU_ITLB_DATA_ARRAY 0xF3000000 #define MMU_UTLB_DATA_ARRAY 0xF7000000 diff --git a/include/asm-sh/dma.h b/include/asm-sh/dma.h index 4c75b70..a65b02f 100644 --- a/include/asm-sh/dma.h +++ b/include/asm-sh/dma.h @@ -152,14 +152,9 @@ extern struct dma_info *get_dma_info_by_ extern int dma_extend(unsigned int chan, unsigned long op, void *param); extern int register_chan_caps(const char *dmac, struct dma_chan_caps *capslist); -#ifdef CONFIG_SYSFS /* arch/sh/drivers/dma/dma-sysfs.c */ extern int dma_create_sysfs_files(struct dma_channel *, struct dma_info *); extern void dma_remove_sysfs_files(struct dma_channel *, struct dma_info *); -#else -#define dma_create_sysfs_file(channel, info) do { } while (0) -#define dma_remove_sysfs_file(channel, info) do { } while (0) -#endif #ifdef CONFIG_PCI extern int isa_dma_bridge_buggy; diff --git a/include/asm-sh/dreamcast/maple.h b/include/asm-sh/dreamcast/maple.h new file mode 100644 index 0000000..51f6a87 --- /dev/null +++ b/include/asm-sh/dreamcast/maple.h @@ -0,0 +1,37 @@ +#ifndef __ASM_MAPLE_H +#define __ASM_MAPLE_H + +#define MAPLE_PORTS 4 +#define MAPLE_PNP_INTERVAL HZ +#define MAPLE_MAXPACKETS 8 +#define MAPLE_DMA_ORDER 14 +#define MAPLE_DMA_SIZE (1 << MAPLE_DMA_ORDER) +#define MAPLE_DMA_PAGES ((MAPLE_DMA_ORDER > PAGE_SHIFT) ? \ + MAPLE_DMA_ORDER - PAGE_SHIFT : 0) + +/* Maple Bus registers */ +#define MAPLE_BASE 0xa05f6c00 +#define MAPLE_DMAADDR (MAPLE_BASE+0x04) +#define MAPLE_TRIGTYPE (MAPLE_BASE+0x10) +#define MAPLE_ENABLE (MAPLE_BASE+0x14) +#define MAPLE_STATE (MAPLE_BASE+0x18) +#define MAPLE_SPEED (MAPLE_BASE+0x80) +#define MAPLE_RESET (MAPLE_BASE+0x8c) + +#define MAPLE_MAGIC 0x6155404f +#define MAPLE_2MBPS 0 +#define MAPLE_TIMEOUT(n) ((n)<<15) + +/* Function codes */ +#define MAPLE_FUNC_CONTROLLER 0x001 +#define MAPLE_FUNC_MEMCARD 0x002 +#define MAPLE_FUNC_LCD 0x004 +#define MAPLE_FUNC_CLOCK 0x008 +#define MAPLE_FUNC_MICROPHONE 0x010 +#define MAPLE_FUNC_ARGUN 0x020 +#define MAPLE_FUNC_KEYBOARD 0x040 +#define MAPLE_FUNC_LIGHTGUN 0x080 +#define MAPLE_FUNC_PURUPURU 0x100 +#define MAPLE_FUNC_MOUSE 0x200 + +#endif /* __ASM_MAPLE_H */ diff --git a/include/asm-sh/gpio.h b/include/asm-sh/gpio.h new file mode 100644 index 0000000..9bb27e0 --- /dev/null +++ b/include/asm-sh/gpio.h @@ -0,0 +1,19 @@ +/* + * include/asm-sh/gpio.h + * + * Copyright (C) 2007 Markus Brunner, Mark Jonas + * + * Addresses for the Pin Function Controller + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_SH_GPIO_H +#define __ASM_SH_GPIO_H + +#if defined(CONFIG_CPU_SH3) +#include +#endif + +#endif /* __ASM_SH_GPIO_H */ diff --git a/include/asm-sh/hd64461.h b/include/asm-sh/hd64461.h index 4dd8592..342ca55 100644 --- a/include/asm-sh/hd64461.h +++ b/include/asm-sh/hd64461.h @@ -226,6 +226,7 @@ #define HD64461_NIRR (CONFIG_HD64461_IO #define HD64461_NIMR (CONFIG_HD64461_IOBASE + 0x5002) #define HD64461_IRQBASE OFFCHIP_IRQ_BASE +#define OFFCHIP_IRQ_BASE 64 #define HD64461_IRQ_NUM 16 #define HD64461_IRQ_UART (HD64461_IRQBASE+5) diff --git a/include/asm-sh/heartbeat.h b/include/asm-sh/heartbeat.h new file mode 100644 index 0000000..724a43e --- /dev/null +++ b/include/asm-sh/heartbeat.h @@ -0,0 +1,17 @@ +#ifndef __ASM_SH_HEARTBEAT_H +#define __ASM_SH_HEARTBEAT_H + +#include + +#define HEARTBEAT_INVERTED (1 << 0) + +struct heartbeat_data { + void __iomem *base; + unsigned char *bit_pos; + unsigned int nr_bits; + struct timer_list timer; + unsigned int regsize; + unsigned long flags; +}; + +#endif /* __ASM_SH_HEARTBEAT_H */ diff --git a/include/asm-sh/hw_irq.h b/include/asm-sh/hw_irq.h index 20d4295..cb0b6c9 100644 --- a/include/asm-sh/hw_irq.h +++ b/include/asm-sh/hw_irq.h @@ -6,24 +6,6 @@ #include extern atomic_t irq_err_count; -struct intc2_data { - unsigned short irq; - unsigned char ipr_offset, ipr_shift; - unsigned char msk_offset, msk_shift; - unsigned char priority; -}; - -struct intc2_desc { - unsigned long prio_base; - unsigned long msk_base; - unsigned long mskclr_base; - struct intc2_data *intc2_data; - unsigned int nr_irqs; - struct irq_chip chip; -}; - -void register_intc2_controller(struct intc2_desc *); - struct ipr_data { unsigned char irq; unsigned char ipr_idx; /* Index for the IPR registered */ @@ -41,11 +23,6 @@ struct ipr_desc { void register_ipr_controller(struct ipr_desc *); -/* - * Enable individual interrupt mode for external IPR IRQs. - */ -void __init ipr_irq_enable_irlm(void); - typedef unsigned char intc_enum; struct intc_vect { @@ -54,6 +31,7 @@ struct intc_vect { }; #define INTC_VECT(enum_id, vect) { enum_id, vect } +#define INTC_IRQ(enum_id, irq) INTC_VECT(enum_id, irq2evt(irq)) struct intc_prio { intc_enum enum_id; @@ -64,19 +42,25 @@ #define INTC_PRIO(enum_id, prio) { enum_ struct intc_group { intc_enum enum_id; - intc_enum *enum_ids; + intc_enum enum_ids[32]; }; -#define INTC_GROUP(enum_id, ids...) { enum_id, (intc_enum []) { ids, 0 } } +#define INTC_GROUP(enum_id, ids...) { enum_id, { ids } } struct intc_mask_reg { unsigned long set_reg, clr_reg, reg_width; intc_enum enum_ids[32]; +#ifdef CONFIG_SMP + unsigned long smp; +#endif }; struct intc_prio_reg { - unsigned long reg, reg_width, field_width; + unsigned long set_reg, clr_reg, reg_width, field_width; intc_enum enum_ids[16]; +#ifdef CONFIG_SMP + unsigned long smp; +#endif }; struct intc_sense_reg { @@ -84,6 +68,12 @@ struct intc_sense_reg { intc_enum enum_ids[16]; }; +#ifdef CONFIG_SMP +#define INTC_SMP(stride, nr) .smp = (stride) | ((nr) << 8) +#else +#define INTC_SMP(stride, nr) +#endif + struct intc_desc { struct intc_vect *vectors; unsigned int nr_vectors; @@ -97,25 +87,28 @@ struct intc_desc { unsigned int nr_prio_regs; struct intc_sense_reg *sense_regs; unsigned int nr_sense_regs; - struct irq_chip chip; + char *name; }; #define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a) #define DECLARE_INTC_DESC(symbol, chipname, vectors, groups, \ priorities, mask_regs, prio_regs, sense_regs) \ -struct intc_desc symbol = { \ +struct intc_desc symbol __initdata = { \ _INTC_ARRAY(vectors), _INTC_ARRAY(groups), \ _INTC_ARRAY(priorities), \ _INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs), \ _INTC_ARRAY(sense_regs), \ - .chip.name = chipname, \ + chipname, \ } void __init register_intc_controller(struct intc_desc *desc); +int intc_set_priority(unsigned int irq, unsigned int prio); void __init plat_irq_setup(void); -enum { IRQ_MODE_IRQ, IRQ_MODE_IRL7654, IRQ_MODE_IRL3210 }; +enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210, + IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK, + IRQ_MODE_IRL7654, IRQ_MODE_IRL3210 }; void __init plat_irq_setup_pins(int mode); #endif /* __ASM_SH_HW_IRQ_H */ diff --git a/include/asm-sh/ilsel.h b/include/asm-sh/ilsel.h new file mode 100644 index 0000000..e3d304b --- /dev/null +++ b/include/asm-sh/ilsel.h @@ -0,0 +1,45 @@ +#ifndef __ASM_SH_ILSEL_H +#define __ASM_SH_ILSEL_H + +typedef enum { + ILSEL_NONE, + ILSEL_LAN, + ILSEL_USBH_I, + ILSEL_USBH_S, + ILSEL_USBH_V, + ILSEL_RTC, + ILSEL_USBP_I, + ILSEL_USBP_S, + ILSEL_USBP_V, + ILSEL_KEY, + + /* + * ILSEL Aliases - corner cases for interleaved level tables. + * + * Someone thought this was a good idea and less hassle than + * demuxing a shared vector, really. + */ + + /* ILSEL0 and 2 */ + ILSEL_FPGA0, + ILSEL_FPGA1, + ILSEL_EX1, + ILSEL_EX2, + ILSEL_EX3, + ILSEL_EX4, + + /* ILSEL1 and 3 */ + ILSEL_FPGA2 = ILSEL_FPGA0, + ILSEL_FPGA3 = ILSEL_FPGA1, + ILSEL_EX5 = ILSEL_EX1, + ILSEL_EX6 = ILSEL_EX2, + ILSEL_EX7 = ILSEL_EX3, + ILSEL_EX8 = ILSEL_EX4, +} ilsel_source_t; + +/* arch/sh/boards/renesas/x3proto/ilsel.c */ +int ilsel_enable(ilsel_source_t set); +int ilsel_enable_fixed(ilsel_source_t set, unsigned int level); +void ilsel_disable(unsigned int irq); + +#endif /* __ASM_SH_ILSEL_H */ diff --git a/include/asm-sh/io.h b/include/asm-sh/io.h index e6a1877..1a336cd 100644 --- a/include/asm-sh/io.h +++ b/include/asm-sh/io.h @@ -135,6 +135,32 @@ #ifdef __raw_writel # define writel(v,a) ({ __raw_writel((v),(a)); mb(); }) #endif +#define __BUILD_MEMORY_STRING(bwlq, type) \ + \ +static inline void writes##bwlq(volatile void __iomem *mem, \ + const void *addr, unsigned int count) \ +{ \ + const volatile type *__addr = addr; \ + \ + while (count--) { \ + __raw_write##bwlq(*__addr, mem); \ + __addr++; \ + } \ +} \ + \ +static inline void reads##bwlq(volatile void __iomem *mem, void *addr, \ + unsigned int count) \ +{ \ + volatile type *__addr = addr; \ + \ + while (count--) { \ + *__addr = __raw_read##bwlq(mem); \ + __addr++; \ + } \ +} + +__BUILD_MEMORY_STRING(b, u8) +__BUILD_MEMORY_STRING(w, u16) #define writesl __raw_writesl #define readsl __raw_readsl diff --git a/include/asm-sh/magicpanelr2.h b/include/asm-sh/magicpanelr2.h new file mode 100644 index 0000000..c644a77 --- /dev/null +++ b/include/asm-sh/magicpanelr2.h @@ -0,0 +1,67 @@ +/* + * include/asm-sh/magicpanelr2.h + * + * Copyright (C) 2007 Markus Brunner, Mark Jonas + * + * I/O addresses and bitmasks for Magic Panel Release 2 board + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef __ASM_SH_MAGICPANELR2_H +#define __ASM_SH_MAGICPANELR2_H + +#include + +#define __IO_PREFIX mpr2 +#include + + +#define SETBITS_OUTB(mask, reg) ctrl_outb(ctrl_inb(reg) | mask, reg) +#define SETBITS_OUTW(mask, reg) ctrl_outw(ctrl_inw(reg) | mask, reg) +#define SETBITS_OUTL(mask, reg) ctrl_outl(ctrl_inl(reg) | mask, reg) +#define CLRBITS_OUTB(mask, reg) ctrl_outb(ctrl_inb(reg) & ~mask, reg) +#define CLRBITS_OUTW(mask, reg) ctrl_outw(ctrl_inw(reg) & ~mask, reg) +#define CLRBITS_OUTL(mask, reg) ctrl_outl(ctrl_inl(reg) & ~mask, reg) + + +#define PA_LED PORT_PADR /* LED */ + + +/* BSC */ +#define CMNCR 0xA4FD0000UL +#define CS0BCR 0xA4FD0004UL +#define CS2BCR 0xA4FD0008UL +#define CS3BCR 0xA4FD000CUL +#define CS4BCR 0xA4FD0010UL +#define CS5ABCR 0xA4FD0014UL +#define CS5BBCR 0xA4FD0018UL +#define CS6ABCR 0xA4FD001CUL +#define CS6BBCR 0xA4FD0020UL +#define CS0WCR 0xA4FD0024UL +#define CS2WCR 0xA4FD0028UL +#define CS3WCR 0xA4FD002CUL +#define CS4WCR 0xA4FD0030UL +#define CS5AWCR 0xA4FD0034UL +#define CS5BWCR 0xA4FD0038UL +#define CS6AWCR 0xA4FD003CUL +#define CS6BWCR 0xA4FD0040UL + + +/* usb */ + +#define PORT_UTRCTL 0xA405012CUL +#define PORT_UCLKCR_W 0xA40A0008UL + +#define INTC_ICR0 0xA414FEE0UL +#define INTC_ICR1 0xA4140010UL +#define INTC_ICR2 0xA4140012UL + +/* MTD */ + +#define MPR2_MTD_BOOTLOADER_SIZE 0x00060000UL +#define MPR2_MTD_KERNEL_SIZE 0x00200000UL + +#endif /* __ASM_SH_MAGICPANELR2_H */ diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h index 6bc9bba..cb3d46c 100644 --- a/include/asm-sh/page.h +++ b/include/asm-sh/page.h @@ -70,14 +70,14 @@ extern void clear_page_nommu(void *to); extern void copy_page_nommu(void *to, void *from); #endif -#if defined(CONFIG_MMU) && (defined(CONFIG_CPU_SH4) || \ - defined(CONFIG_SH7705_CACHE_32KB)) +#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \ + (defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)) struct page; extern void clear_user_page(void *to, unsigned long address, struct page *pg); extern void copy_user_page(void *to, void *from, unsigned long address, struct page *pg); extern void __clear_user_page(void *to, void *orig_to); extern void __copy_user_page(void *to, void *from, void *orig_to); -#elif defined(CONFIG_CPU_SH2) || defined(CONFIG_CPU_SH3) || !defined(CONFIG_MMU) +#else #define clear_user_page(page, vaddr, pg) clear_page(page) #define copy_user_page(to, from, vaddr, pg) copy_page(to, from) #endif @@ -88,6 +88,7 @@ #endif #ifdef CONFIG_X2TLB typedef struct { unsigned long pte_low, pte_high; } pte_t; typedef struct { unsigned long long pgprot; } pgprot_t; +typedef struct { unsigned long long pgd; } pgd_t; #define pte_val(x) \ ((x).pte_low | ((unsigned long long)(x).pte_high << 32)) #define __pte(x) \ @@ -95,12 +96,11 @@ #define __pte(x) \ #else typedef struct { unsigned long pte_low; } pte_t; typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct { unsigned long pgd; } pgd_t; #define pte_val(x) ((x).pte_low) #define __pte(x) ((pte_t) { (x) } ) #endif -typedef struct { unsigned long pgd; } pgd_t; - #define pgd_val(x) ((x).pgd) #define pgprot_val(x) ((x).pgprot) diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h index e3fae12..cf0dd2b 100644 --- a/include/asm-sh/pgtable.h +++ b/include/asm-sh/pgtable.h @@ -42,13 +42,12 @@ #define PTE_BITS (PTE_SHIFT - PTE_MAGNIT /* PGD bits */ #define PGDIR_SHIFT (PTE_SHIFT + PTE_BITS) -#define PGDIR_BITS (32 - PGDIR_SHIFT) #define PGDIR_SIZE (1UL << PGDIR_SHIFT) #define PGDIR_MASK (~(PGDIR_SIZE-1)) /* Entries per level */ #define PTRS_PER_PTE (PAGE_SIZE / (1 << PTE_MAGNITUDE)) -#define PTRS_PER_PGD (PAGE_SIZE / 4) +#define PTRS_PER_PGD (PAGE_SIZE / sizeof(pgd_t)) #define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE) #define FIRST_USER_ADDRESS 0 @@ -100,17 +99,18 @@ #define _PAGE_WT 0x001 /* WT-bit on SH- #define _PAGE_HW_SHARED 0x002 /* SH-bit : shared among processes */ #define _PAGE_DIRTY 0x004 /* D-bit : page changed */ #define _PAGE_CACHABLE 0x008 /* C-bit : cachable */ -#ifndef CONFIG_X2TLB -# define _PAGE_SZ0 0x010 /* SZ0-bit : Size of page */ -# define _PAGE_RW 0x020 /* PR0-bit : write access allowed */ -# define _PAGE_USER 0x040 /* PR1-bit : user space access allowed*/ -# define _PAGE_SZ1 0x080 /* SZ1-bit : Size of page (on SH-4) */ -#endif +#define _PAGE_SZ0 0x010 /* SZ0-bit : Size of page */ +#define _PAGE_RW 0x020 /* PR0-bit : write access allowed */ +#define _PAGE_USER 0x040 /* PR1-bit : user space access allowed*/ +#define _PAGE_SZ1 0x080 /* SZ1-bit : Size of page (on SH-4) */ #define _PAGE_PRESENT 0x100 /* V-bit : page is valid */ #define _PAGE_PROTNONE 0x200 /* software: if not present */ #define _PAGE_ACCESSED 0x400 /* software: page referenced */ #define _PAGE_FILE _PAGE_WT /* software: pagecache or swap? */ +#define _PAGE_SZ_MASK (_PAGE_SZ0 | _PAGE_SZ1) +#define _PAGE_PR_MASK (_PAGE_RW | _PAGE_USER) + /* Extended mode bits */ #define _PAGE_EXT_ESZ0 0x0010 /* ESZ0-bit: Size of page */ #define _PAGE_EXT_ESZ1 0x0020 /* ESZ1-bit: Size of page */ @@ -126,11 +126,7 @@ #define _PAGE_EXT_KERN_WRITE 0x1000 /* E #define _PAGE_EXT_KERN_READ 0x2000 /* EPR5-bit: Kernel space readable */ /* Wrapper for extended mode pgprot twiddling */ -#ifdef CONFIG_X2TLB -# define _PAGE_EXT(x) ((unsigned long long)(x) << 32) -#else -# define _PAGE_EXT(x) (0) -#endif +#define _PAGE_EXT(x) ((unsigned long long)(x) << 32) /* software: moves to PTEA.TC (Timing Control) */ #define _PAGE_PCC_AREA5 0x00000000 /* use BSC registers for area5 */ @@ -146,10 +142,14 @@ #define _PAGE_PCC_ATR8 0x60000000 /* Att #define _PAGE_PCC_ATR16 0x60000001 /* Attribute Memory space, 6 bit bus */ /* Mask which drops unused bits from the PTEL value */ -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) #define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED| \ _PAGE_FILE | _PAGE_SZ1 | \ _PAGE_HW_SHARED) +#elif defined(CONFIG_X2TLB) +/* Get rid of the legacy PR/SZ bits when using extended mode */ +#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED | \ + _PAGE_FILE | _PAGE_PR_MASK | _PAGE_SZ_MASK) #else #define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED | _PAGE_FILE) #endif @@ -212,27 +212,36 @@ #define PAGE_NONE __pgprot(_PAGE_PROTNON #define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_USER_READ | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_USER_READ | \ _PAGE_EXT_USER_WRITE)) #define PAGE_EXECREAD __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_USER_EXEC | \ + _PAGE_EXT(_PAGE_EXT_KERN_EXEC | \ + _PAGE_EXT_KERN_READ | \ + _PAGE_EXT_USER_EXEC | \ _PAGE_EXT_USER_READ)) #define PAGE_COPY PAGE_EXECREAD #define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_USER_READ)) + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_USER_READ)) #define PAGE_WRITEONLY __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_USER_WRITE)) + _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_USER_WRITE)) #define PAGE_RWX __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_USER_WRITE | \ + _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_EXEC | \ + _PAGE_EXT_USER_WRITE | \ _PAGE_EXT_USER_READ | \ _PAGE_EXT_USER_EXEC)) @@ -373,11 +382,15 @@ #define set_pte_at(mm,addr,ptep,pteval) #define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) #define pte_pfn(x) ((unsigned long)(((x).pte_low >> PAGE_SHIFT))) -#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) -#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) -#define pte_none(x) (!pte_val(x)) -#define pte_present(x) (pte_val(x) & (_PAGE_PRESENT | _PAGE_PROTNONE)) +#define pfn_pte(pfn, prot) \ + __pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#define pfn_pmd(pfn, prot) \ + __pmd(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot)) + +#define pte_none(x) (!pte_val(x)) +#define pte_present(x) ((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE)) + #define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0) #define pmd_none(x) (!pmd_val(x)) @@ -392,15 +405,15 @@ #define pte_page(x) phys_to_page(pte_val * The following only work if pte_present() is true. * Undefined behaviour if not.. */ -#define pte_not_present(pte) (!(pte_val(pte) & _PAGE_PRESENT)) -#define pte_dirty(pte) (pte_val(pte) & _PAGE_DIRTY) -#define pte_young(pte) (pte_val(pte) & _PAGE_ACCESSED) -#define pte_file(pte) (pte_val(pte) & _PAGE_FILE) +#define pte_not_present(pte) (!((pte).pte_low & _PAGE_PRESENT)) +#define pte_dirty(pte) ((pte).pte_low & _PAGE_DIRTY) +#define pte_young(pte) ((pte).pte_low & _PAGE_ACCESSED) +#define pte_file(pte) ((pte).pte_low & _PAGE_FILE) #ifdef CONFIG_X2TLB #define pte_write(pte) ((pte).pte_high & _PAGE_EXT_USER_WRITE) #else -#define pte_write(pte) (pte_val(pte) & _PAGE_RW) +#define pte_write(pte) ((pte).pte_low & _PAGE_RW) #endif #define PTE_BIT_FUNC(h,fn,op) \ @@ -429,17 +442,10 @@ PTE_BIT_FUNC(low, mkyoung, |= _PAGE_ACCE /* * Macro and implementation to make a page protection as uncachable. */ -#define pgprot_noncached pgprot_noncached +#define pgprot_writecombine(prot) \ + __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE) -static inline pgprot_t pgprot_noncached(pgprot_t _prot) -{ - unsigned long prot = pgprot_val(_prot); - - prot &= ~_PAGE_CACHABLE; - return __pgprot(prot); -} - -#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE) +#define pgprot_noncached pgprot_writecombine /* * Conversion functions: convert a page and protection to a page entry, @@ -451,28 +457,33 @@ #define mk_pte(page, pgprot) pfn_pte(pag static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) { - set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) | - pgprot_val(newprot))); + pte.pte_low &= _PAGE_CHG_MASK; + pte.pte_low |= pgprot_val(newprot); + +#ifdef CONFIG_X2TLB + pte.pte_high |= pgprot_val(newprot) >> 32; +#endif + return pte; } -#define pmd_page_vaddr(pmd) pmd_val(pmd) +#define pmd_page_vaddr(pmd) ((unsigned long)pmd_val(pmd)) #define pmd_page(pmd) (virt_to_page(pmd_val(pmd))) /* to find an entry in a page-table-directory. */ -#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) -#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address)) +#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) +#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address)) /* to find an entry in a kernel page-table-directory */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) +#define pgd_offset_k(address) pgd_offset(&init_mm, address) /* Find an entry in the third-level page table.. */ -#define pte_index(address) \ - ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) +#define pte_index(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) #define pte_offset_kernel(dir, address) \ ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address)) -#define pte_offset_map(dir, address) pte_offset_kernel(dir, address) -#define pte_offset_map_nested(dir, address) pte_offset_kernel(dir, address) +#define pte_offset_map(dir, address) pte_offset_kernel(dir, address) +#define pte_offset_map_nested(dir, address) pte_offset_kernel(dir, address) + #define pte_unmap(pte) do { } while (0) #define pte_unmap_nested(pte) do { } while (0) @@ -480,13 +491,14 @@ #ifdef CONFIG_X2TLB #define pte_ERROR(e) \ printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, \ &(e), (e).pte_high, (e).pte_low) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %016llx.\n", __FILE__, __LINE__, pgd_val(e)) #else #define pte_ERROR(e) \ printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) -#endif - #define pgd_ERROR(e) \ printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) +#endif struct vm_area_struct; extern void update_mmu_cache(struct vm_area_struct * vma, @@ -563,7 +575,8 @@ #ifndef CONFIG_MMU extern unsigned int kobjsize(const void *objp); #endif /* !CONFIG_MMU */ -#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB) +#if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \ + defined(CONFIG_SH7705_CACHE_32KB)) #define __HAVE_ARCH_PTEP_GET_AND_CLEAR extern pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep); #endif diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index 26d5217..4f2922a 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -45,7 +45,7 @@ enum cpu_type { CPU_SH7705, CPU_SH7706, CPU_SH7707, CPU_SH7708, CPU_SH7708S, CPU_SH7708R, CPU_SH7709, CPU_SH7709A, CPU_SH7710, CPU_SH7712, - CPU_SH7729, + CPU_SH7720, CPU_SH7729, /* SH-4 types */ CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R, @@ -73,15 +73,10 @@ struct sh_cpuinfo { unsigned long flags; } __attribute__ ((aligned(SMP_CACHE_BYTES))); -extern struct sh_cpuinfo boot_cpu_data; - -#ifdef CONFIG_SMP extern struct sh_cpuinfo cpu_data[]; +#define boot_cpu_data cpu_data[0] #define current_cpu_data cpu_data[smp_processor_id()] -#else -#define cpu_data (&boot_cpu_data) -#define current_cpu_data boot_cpu_data -#endif +#define raw_current_cpu_data cpu_data[raw_smp_processor_id()] /* * User space process size: 2GB. diff --git a/include/asm-sh/r7780rp.h b/include/asm-sh/r7780rp.h index 4083b59..de37f93 100644 --- a/include/asm-sh/r7780rp.h +++ b/include/asm-sh/r7780rp.h @@ -65,24 +65,6 @@ #define PA_POFF (PA_BCR+0x0800) #define PA_PMR (PA_BCR+0x0900) /* */ #define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ - -#define IRQ_PCISLOT1 65 /* PCI Slot #1 IRQ */ -#define IRQ_PCISLOT2 66 /* PCI Slot #2 IRQ */ -#define IRQ_PCISLOT3 67 /* PCI Slot #3 IRQ */ -#define IRQ_PCISLOT4 68 /* PCI Slot #4 IRQ */ -#define IRQ_TP 2 /* Touch Panel IRQ */ -#define IRQ_SCI1 3 /* SCI1 IRQ */ -#define IRQ_SCI0 4 /* SCI0 IRQ */ -#define IRQ_2SERIAL 5 /* Serial IRQ */ -#define IRQ_RTC 6 /* RTC A / B IRQ */ -#define IRQ_EXTENTION6 7 /* EXT6n IRQ */ -#define IRQ_EXTENTION5 8 /* EXT5n IRQ */ -#define IRQ_EXTENTION4 9 /* EXT4n IRQ */ -#define IRQ_EXTENTION2 10 /* EXT2n IRQ */ -#define IRQ_EXTENTION1 11 /* EXT1n IRQ */ -#define IRQ_ONETH 13 /* On board Ethernet IRQ */ -#define IRQ_PSW 14 /* Push Switch IRQ */ - #define IVDR_CK_ON 8 /* iVDR Clock ON */ #elif defined(CONFIG_SH_R7780RP) @@ -203,11 +185,24 @@ #define PA_CU5MDR (PA_BCR+0x0302) #define PA_MMSR (PA_BCR+0x0400) #define IVDR_CK_ON 4 /* iVDR Clock ON */ +#endif +#define HL_FPGA_IRQ_BASE 200 +#define HL_NR_IRL 15 + +#define IRQ_AX88796 (HL_FPGA_IRQ_BASE + 0) +#define IRQ_CF (HL_FPGA_IRQ_BASE + 1) +#ifndef IRQ_PSW +#define IRQ_PSW (HL_FPGA_IRQ_BASE + 2) #endif +#define IRQ_EXT1 (HL_FPGA_IRQ_BASE + 3) +#define IRQ_EXT4 (HL_FPGA_IRQ_BASE + 4) void make_r7780rp_irq(unsigned int irq); -void highlander_init_irq(void); + +unsigned char *highlander_init_irq_r7780mp(void); +unsigned char *highlander_init_irq_r7780rp(void); +unsigned char *highlander_init_irq_r7785rp(void); #define __IO_PREFIX r7780rp #include diff --git a/include/asm-sh/rtc.h b/include/asm-sh/rtc.h index 91aacc9..858da99 100644 --- a/include/asm-sh/rtc.h +++ b/include/asm-sh/rtc.h @@ -5,4 +5,10 @@ extern void (*board_time_init)(void); extern void (*rtc_sh_get_time)(struct timespec *); extern int (*rtc_sh_set_time)(const time_t); +#define RTC_CAP_4_DIGIT_YEAR (1 << 0) + +struct sh_rtc_platform_info { + unsigned long capabilities; +}; + #endif /* _ASM_RTC_H */ diff --git a/include/asm-sh/rts7751r2d.h b/include/asm-sh/rts7751r2d.h index 5d7800a..83b9c11 100644 --- a/include/asm-sh/rts7751r2d.h +++ b/include/asm-sh/rts7751r2d.h @@ -9,7 +9,7 @@ #define __ASM_SH_RENESAS_RTS7751R2D_H * Renesas Technology Sales RTS7751R2D support */ -/* Box specific addresses. */ +/* Board specific addresses. */ #define PA_BCR 0xa4000000 /* FPGA */ #define PA_IRLMON 0xa4000002 /* Interrupt Status control */ @@ -20,19 +20,19 @@ #define PA_SDMPOW 0xa400000a /* SD Power #define PA_RTCCE 0xa400000c /* RTC(9701) Enable control */ #define PA_PCICD 0xa400000e /* PCI Extention detect control */ #define PA_VOYAGERRTS 0xa4000020 /* VOYAGER Reset control */ -#if defined(CONFIG_RTS7751R2D_REV11) -#define PA_AXRST 0xa4000022 /* AX_LAN Reset control */ -#define PA_CFRST 0xa4000024 /* CF Reset control */ -#define PA_ADMRTS 0xa4000026 /* SD Reset control */ -#define PA_EXTRST 0xa4000028 /* Extention Reset control */ -#define PA_CFCDINTCLR 0xa400002a /* CF Insert Interrupt clear */ -#else -#define PA_CFRST 0xa4000022 /* CF Reset control */ -#define PA_ADMRTS 0xa4000024 /* SD Reset control */ -#define PA_EXTRST 0xa4000026 /* Extention Reset control */ -#define PA_CFCDINTCLR 0xa4000028 /* CF Insert Interrupt clear */ -#define PA_KEYCTLCLR 0xa400002a /* Key Interrupt clear */ -#endif + +#define PA_R2D1_AXRST 0xa4000022 /* AX_LAN Reset control */ +#define PA_R2D1_CFRST 0xa4000024 /* CF Reset control */ +#define PA_R2D1_ADMRTS 0xa4000026 /* SD Reset control */ +#define PA_R2D1_EXTRST 0xa4000028 /* Extention Reset control */ +#define PA_R2D1_CFCDINTCLR 0xa400002a /* CF Insert Interrupt clear */ + +#define PA_R2DPLUS_CFRST 0xa4000022 /* CF Reset control */ +#define PA_R2DPLUS_ADMRTS 0xa4000024 /* SD Reset control */ +#define PA_R2DPLUS_EXTRST 0xa4000026 /* Extention Reset control */ +#define PA_R2DPLUS_CFCDINTCLR 0xa4000028 /* CF Insert Interrupt clear */ +#define PA_R2DPLUS_KEYCTLCLR 0xa400002a /* Key Interrupt clear */ + #define PA_POWOFF 0xa4000030 /* Board Power OFF control */ #define PA_VERREG 0xa4000032 /* FPGA Version Register */ #define PA_INPORT 0xa4000034 /* KEY Input Port control */ @@ -46,27 +46,22 @@ #define AX88796L_IO_BASE 0x1000 /* AX887 #define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ -#if defined(CONFIG_RTS7751R2D_REV11) -#define IRQ_PCIETH 0 /* PCI Ethernet IRQ */ -#define IRQ_CFCARD 1 /* CF Card IRQ */ -#define IRQ_CFINST 2 /* CF Card Insert IRQ */ -#define IRQ_PCMCIA 3 /* PCMCIA IRQ */ -#define IRQ_VOYAGER 4 /* VOYAGER IRQ */ -#define IRQ_ONETH 5 /* On board Ethernet IRQ */ -#else -#define IRQ_KEYIN 0 /* Key Input IRQ */ -#define IRQ_PCIETH 1 /* PCI Ethernet IRQ */ -#define IRQ_CFCARD 2 /* CF Card IRQ */ -#define IRQ_CFINST 3 /* CF Card Insert IRQ */ -#define IRQ_PCMCIA 4 /* PCMCIA IRQ */ -#define IRQ_VOYAGER 5 /* VOYAGER IRQ */ -#endif -#define IRQ_RTCALM 6 /* RTC Alarm IRQ */ -#define IRQ_RTCTIME 7 /* RTC Timer IRQ */ -#define IRQ_SDCARD 8 /* SD Card IRQ */ -#define IRQ_PCISLOT1 9 /* PCI Slot #1 IRQ */ -#define IRQ_PCISLOT2 10 /* PCI Slot #2 IRQ */ -#define IRQ_EXTENTION 11 /* EXTn IRQ */ +#define R2D_FPGA_IRQ_BASE 100 + +#define IRQ_VOYAGER (R2D_FPGA_IRQ_BASE + 0) +#define IRQ_EXT (R2D_FPGA_IRQ_BASE + 1) +#define IRQ_TP (R2D_FPGA_IRQ_BASE + 2) +#define IRQ_RTC_T (R2D_FPGA_IRQ_BASE + 3) +#define IRQ_RTC_A (R2D_FPGA_IRQ_BASE + 4) +#define IRQ_SDCARD (R2D_FPGA_IRQ_BASE + 5) +#define IRQ_CF_CD (R2D_FPGA_IRQ_BASE + 6) +#define IRQ_CF_IDE (R2D_FPGA_IRQ_BASE + 7) +#define IRQ_AX88796 (R2D_FPGA_IRQ_BASE + 8) +#define IRQ_KEY (R2D_FPGA_IRQ_BASE + 9) +#define IRQ_PCI_INTA (R2D_FPGA_IRQ_BASE + 10) +#define IRQ_PCI_INTB (R2D_FPGA_IRQ_BASE + 11) +#define IRQ_PCI_INTC (R2D_FPGA_IRQ_BASE + 12) +#define IRQ_PCI_INTD (R2D_FPGA_IRQ_BASE + 13) /* arch/sh/boards/renesas/rts7751r2d/irq.c */ void init_rts7751r2d_IRQ(void); diff --git a/include/asm-sh/sh03/io.h b/include/asm-sh/sh03/io.h index 4ff1eb9..c39c785 100644 --- a/include/asm-sh/sh03/io.h +++ b/include/asm-sh/sh03/io.h @@ -11,22 +11,13 @@ #define _ASM_SH_IO_SH03_H #include -#define INTC_IPRD 0xffd00010UL - #define IRL0_IRQ 2 -#define IRL0_IPR_POS 3 #define IRL0_PRIORITY 13 - #define IRL1_IRQ 5 -#define IRL1_IPR_POS 2 #define IRL1_PRIORITY 10 - #define IRL2_IRQ 8 -#define IRL2_IPR_POS 1 #define IRL2_PRIORITY 7 - #define IRL3_IRQ 11 -#define IRL3_IPR_POS 0 #define IRL3_PRIORITY 4 void heartbeat_sh03(void); diff --git a/include/asm-sh/smp.h b/include/asm-sh/smp.h index b99ca78..9c8d34b 100644 --- a/include/asm-sh/smp.h +++ b/include/asm-sh/smp.h @@ -1,12 +1,3 @@ -/* - * include/asm-sh/smp.h - * - * Copyright (C) 2002, 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive for - * more details. - */ #ifndef __ASM_SH_SMP_H #define __ASM_SH_SMP_H @@ -20,6 +11,15 @@ #include #include #define raw_smp_processor_id() (current_thread_info()->cpu) +#define hard_smp_processor_id() plat_smp_processor_id() + +/* Map from cpu id to sequential logical cpu number. */ +extern int __cpu_number_map[NR_CPUS]; +#define cpu_number_map(cpu) __cpu_number_map[cpu] + +/* The reverse map from sequential logical cpu number to cpu id. */ +extern int __cpu_logical_map[NR_CPUS]; +#define cpu_logical_map(cpu) __cpu_logical_map[cpu] /* I've no idea what the real meaning of this is */ #define PROC_CHANGE_PENALTY 20 @@ -35,10 +35,22 @@ struct smp_fn_call_struct { extern struct smp_fn_call_struct smp_fn_call; -#define SMP_MSG_RESCHEDULE 0x0001 +#define SMP_MSG_FUNCTION 0 +#define SMP_MSG_RESCHEDULE 1 +#define SMP_MSG_NR 2 -#endif /* CONFIG_SMP */ +void plat_smp_setup(void); +void plat_prepare_cpus(unsigned int max_cpus); +int plat_smp_processor_id(void); +void plat_start_cpu(unsigned int cpu, unsigned long entry_point); +void plat_send_ipi(unsigned int cpu, unsigned int message); +int plat_register_ipi_handler(unsigned int message, + void (*handler)(void *), void *arg); + +#else #define hard_smp_processor_id() (0) +#endif /* CONFIG_SMP */ + #endif /* __ASM_SH_SMP_H */ diff --git a/include/asm-sh/snapgear.h b/include/asm-sh/snapgear.h index 3554e3a..042d95f 100644 --- a/include/asm-sh/snapgear.h +++ b/include/asm-sh/snapgear.h @@ -19,20 +19,16 @@ #if defined(CONFIG_CPU_SH4) * is the interrupt :-) */ -#define IRL0_IRQ 2 -#define IRL0_IPR_POS 3 +#define IRL0_IRQ 2 #define IRL0_PRIORITY 13 -#define IRL1_IRQ 5 -#define IRL1_IPR_POS 2 +#define IRL1_IRQ 5 #define IRL1_PRIORITY 10 -#define IRL2_IRQ 8 -#define IRL2_IPR_POS 1 +#define IRL2_IRQ 8 #define IRL2_PRIORITY 7 -#define IRL3_IRQ 11 -#define IRL3_IPR_POS 0 +#define IRL3_IRQ 11 #define IRL3_PRIORITY 4 #endif diff --git a/include/asm-sh/spinlock.h b/include/asm-sh/spinlock.h index 92f6e20..e793181 100644 --- a/include/asm-sh/spinlock.h +++ b/include/asm-sh/spinlock.h @@ -2,6 +2,7 @@ * include/asm-sh/spinlock.h * * Copyright (C) 2002, 2003 Paul Mundt + * Copyright (C) 2006, 2007 Akio Idehara * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -10,17 +11,22 @@ #ifndef __ASM_SH_SPINLOCK_H #define __ASM_SH_SPINLOCK_H -#include -#include +/* + * The only locking implemented here uses SH-4A opcodes. For others, + * split this out as per atomic-*.h. + */ +#ifndef CONFIG_CPU_SH4A +#error "Need movli.l/movco.l for spinlocks" +#endif /* * Your basic SMP spinlocks, allowing only a single CPU anywhere */ -#define __raw_spin_is_locked(x) ((x)->lock != 0) +#define __raw_spin_is_locked(x) ((x)->lock <= 0) #define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) #define __raw_spin_unlock_wait(x) \ - do { cpu_relax(); } while (__raw_spin_is_locked(x)) + do { cpu_relax(); } while ((x)->lock) /* * Simple spin lock operations. There are two variants, one clears IRQ's @@ -30,12 +36,19 @@ #define __raw_spin_unlock_wait(x) \ */ static inline void __raw_spin_lock(raw_spinlock_t *lock) { + unsigned long tmp; + unsigned long oldval; + __asm__ __volatile__ ( - "1:\n\t" - "tas.b @%0\n\t" - "bf/s 1b\n\t" - "nop\n\t" - : "=r" (lock->lock) + "1: \n\t" + "movli.l @%2, %0 ! __raw_spin_lock \n\t" + "mov %0, %1 \n\t" + "mov #0, %0 \n\t" + "movco.l %0, @%2 \n\t" + "bf 1b \n\t" + "cmp/pl %1 \n\t" + "bf 1b \n\t" + : "=&z" (tmp), "=&r" (oldval) : "r" (&lock->lock) : "t", "memory" ); @@ -43,12 +56,36 @@ static inline void __raw_spin_lock(raw_s static inline void __raw_spin_unlock(raw_spinlock_t *lock) { - //assert_spin_locked(lock); + unsigned long tmp; - lock->lock = 0; + __asm__ __volatile__ ( + "mov #1, %0 ! __raw_spin_unlock \n\t" + "mov.l %0, @%1 \n\t" + : "=&z" (tmp) + : "r" (&lock->lock) + : "t", "memory" + ); } -#define __raw_spin_trylock(x) (!test_and_set_bit(0, &(x)->lock)) +static inline int __raw_spin_trylock(raw_spinlock_t *lock) +{ + unsigned long tmp, oldval; + + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%2, %0 ! __raw_spin_trylock \n\t" + "mov %0, %1 \n\t" + "mov #0, %0 \n\t" + "movco.l %0, @%2 \n\t" + "bf 1b \n\t" + "synco \n\t" + : "=&z" (tmp), "=&r" (oldval) + : "r" (&lock->lock) + : "t", "memory" + ); + + return oldval; +} /* * Read-write spinlocks, allowing multiple readers but only one writer. @@ -59,58 +96,124 @@ #define __raw_spin_trylock(x) (!test_and * read-locks. */ +/** + * read_can_lock - would read_trylock() succeed? + * @lock: the rwlock in question. + */ +#define __raw_read_can_lock(x) ((x)->lock > 0) + +/** + * write_can_lock - would write_trylock() succeed? + * @lock: the rwlock in question. + */ +#define __raw_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS) + static inline void __raw_read_lock(raw_rwlock_t *rw) { - __raw_spin_lock(&rw->lock); - - atomic_inc(&rw->counter); + unsigned long tmp; - __raw_spin_unlock(&rw->lock); + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%1, %0 ! __raw_read_lock \n\t" + "cmp/pl %0 \n\t" + "bf 1b \n\t" + "add #-1, %0 \n\t" + "movco.l %0, @%1 \n\t" + "bf 1b \n\t" + : "=&z" (tmp) + : "r" (&rw->lock) + : "t", "memory" + ); } static inline void __raw_read_unlock(raw_rwlock_t *rw) { - __raw_spin_lock(&rw->lock); - - atomic_dec(&rw->counter); + unsigned long tmp; - __raw_spin_unlock(&rw->lock); + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%1, %0 ! __raw_read_unlock \n\t" + "add #1, %0 \n\t" + "movco.l %0, @%1 \n\t" + "bf 1b \n\t" + : "=&z" (tmp) + : "r" (&rw->lock) + : "t", "memory" + ); } static inline void __raw_write_lock(raw_rwlock_t *rw) { - __raw_spin_lock(&rw->lock); - atomic_set(&rw->counter, -1); + unsigned long tmp; + + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%1, %0 ! __raw_write_lock \n\t" + "cmp/hs %2, %0 \n\t" + "bf 1b \n\t" + "sub %2, %0 \n\t" + "movco.l %0, @%1 \n\t" + "bf 1b \n\t" + : "=&z" (tmp) + : "r" (&rw->lock), "r" (RW_LOCK_BIAS) + : "t", "memory" + ); } static inline void __raw_write_unlock(raw_rwlock_t *rw) { - atomic_set(&rw->counter, 0); - __raw_spin_unlock(&rw->lock); + __asm__ __volatile__ ( + "mov.l %1, @%0 ! __raw_write_unlock \n\t" + : + : "r" (&rw->lock), "r" (RW_LOCK_BIAS) + : "t", "memory" + ); } -static inline int __raw_write_can_lock(raw_rwlock_t *rw) +static inline int __raw_read_trylock(raw_rwlock_t *rw) { - return (atomic_read(&rw->counter) == RW_LOCK_BIAS); -} + unsigned long tmp, oldval; -static inline int __raw_read_trylock(raw_rwlock_t *lock) -{ - atomic_t *count = (atomic_t*)lock; - if (atomic_dec_return(count) >= 0) - return 1; - atomic_inc(count); - return 0; + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%2, %0 ! __raw_read_trylock \n\t" + "mov %0, %1 \n\t" + "cmp/pl %0 \n\t" + "bf 2f \n\t" + "add #-1, %0 \n\t" + "movco.l %0, @%2 \n\t" + "bf 1b \n\t" + "2: \n\t" + "synco \n\t" + : "=&z" (tmp), "=&r" (oldval) + : "r" (&rw->lock) + : "t", "memory" + ); + + return (oldval > 0); } static inline int __raw_write_trylock(raw_rwlock_t *rw) { - if (atomic_sub_and_test(RW_LOCK_BIAS, &rw->counter)) - return 1; - - atomic_add(RW_LOCK_BIAS, &rw->counter); + unsigned long tmp, oldval; + + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%2, %0 ! __raw_write_trylock \n\t" + "mov %0, %1 \n\t" + "cmp/hs %3, %0 \n\t" + "bf 2f \n\t" + "sub %3, %0 \n\t" + "2: \n\t" + "movco.l %0, @%2 \n\t" + "bf 1b \n\t" + "synco \n\t" + : "=&z" (tmp), "=&r" (oldval) + : "r" (&rw->lock), "r" (RW_LOCK_BIAS) + : "t", "memory" + ); - return 0; + return (oldval > (RW_LOCK_BIAS - 1)); } #define _raw_spin_relax(lock) cpu_relax() diff --git a/include/asm-sh/spinlock_types.h b/include/asm-sh/spinlock_types.h index 5c58134..b4d244e 100644 --- a/include/asm-sh/spinlock_types.h +++ b/include/asm-sh/spinlock_types.h @@ -6,19 +6,16 @@ # error "please don't include this file #endif typedef struct { - volatile unsigned long lock; + volatile unsigned int lock; } raw_spinlock_t; -#define __RAW_SPIN_LOCK_UNLOCKED { 1 } - -#include +#define __RAW_SPIN_LOCK_UNLOCKED { 1 } typedef struct { - raw_spinlock_t lock; - atomic_t counter; + volatile unsigned int lock; } raw_rwlock_t; #define RW_LOCK_BIAS 0x01000000 -#define __RAW_RW_LOCK_UNLOCKED { { 0 }, { RW_LOCK_BIAS } } +#define __RAW_RW_LOCK_UNLOCKED { RW_LOCK_BIAS } #endif diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h index 2450425..9d849e6 100644 --- a/include/asm-sh/system.h +++ b/include/asm-sh/system.h @@ -266,6 +266,7 @@ void disable_hlt(void); void enable_hlt(void); void default_idle(void); +void per_cpu_trap_init(void); asmlinkage void break_point_trap(void); asmlinkage void debug_trap_handler(unsigned long r4, unsigned long r5, diff --git a/include/asm-sh/voyagergx.h b/include/asm-sh/voyagergx.h index 64c936b..d825596 100644 --- a/include/asm-sh/voyagergx.h +++ b/include/asm-sh/voyagergx.h @@ -27,13 +27,35 @@ #define VOYAGER_USBH_BASE (0x40000 + VO #define VOYAGER_UART_BASE (0x30000 + VOYAGER_BASE) #define VOYAGER_AC97_BASE (0xa0000 + VOYAGER_BASE) -#define VOYAGER_IRQ_NUM 32 -#define VOYAGER_IRQ_BASE 50 -#define VOYAGER_USBH_IRQ VOYAGER_IRQ_BASE + 6 -#define VOYAGER_8051_IRQ VOYAGER_IRQ_BASE + 10 -#define VOYAGER_UART0_IRQ VOYAGER_IRQ_BASE + 12 -#define VOYAGER_UART1_IRQ VOYAGER_IRQ_BASE + 13 -#define VOYAGER_AC97_IRQ VOYAGER_IRQ_BASE + 17 +#define VOYAGER_IRQ_NUM 26 +#define VOYAGER_IRQ_BASE 200 + +#define IRQ_SM501_UP (VOYAGER_IRQ_BASE + 0) +#define IRQ_SM501_G54 (VOYAGER_IRQ_BASE + 1) +#define IRQ_SM501_G53 (VOYAGER_IRQ_BASE + 2) +#define IRQ_SM501_G52 (VOYAGER_IRQ_BASE + 3) +#define IRQ_SM501_G51 (VOYAGER_IRQ_BASE + 4) +#define IRQ_SM501_G50 (VOYAGER_IRQ_BASE + 5) +#define IRQ_SM501_G49 (VOYAGER_IRQ_BASE + 6) +#define IRQ_SM501_G48 (VOYAGER_IRQ_BASE + 7) +#define IRQ_SM501_I2C (VOYAGER_IRQ_BASE + 8) +#define IRQ_SM501_PW (VOYAGER_IRQ_BASE + 9) +#define IRQ_SM501_DMA (VOYAGER_IRQ_BASE + 10) +#define IRQ_SM501_PCI (VOYAGER_IRQ_BASE + 11) +#define IRQ_SM501_I2S (VOYAGER_IRQ_BASE + 12) +#define IRQ_SM501_AC (VOYAGER_IRQ_BASE + 13) +#define IRQ_SM501_US (VOYAGER_IRQ_BASE + 14) +#define IRQ_SM501_U1 (VOYAGER_IRQ_BASE + 15) +#define IRQ_SM501_U0 (VOYAGER_IRQ_BASE + 16) +#define IRQ_SM501_CV (VOYAGER_IRQ_BASE + 17) +#define IRQ_SM501_MC (VOYAGER_IRQ_BASE + 18) +#define IRQ_SM501_S1 (VOYAGER_IRQ_BASE + 19) +#define IRQ_SM501_S0 (VOYAGER_IRQ_BASE + 20) +#define IRQ_SM501_UH (VOYAGER_IRQ_BASE + 21) +#define IRQ_SM501_2D (VOYAGER_IRQ_BASE + 22) +#define IRQ_SM501_ZD (VOYAGER_IRQ_BASE + 23) +#define IRQ_SM501_PV (VOYAGER_IRQ_BASE + 24) +#define IRQ_SM501_CI (VOYAGER_IRQ_BASE + 25) /* ----- MISC controle register ------------------------------ */ #define MISC_CTRL (0x000004 + VOYAGER_BASE) @@ -313,4 +335,7 @@ #define AC97C_INDEX_MASK 0x7f void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t); int voyagergx_consistent_free(struct device *, size_t, void *, dma_addr_t); +/* arch/sh/cchips/voyagergx/irq.c */ +void setup_voyagergx_irq(void); + #endif /* _VOYAGER_GX_REG_H */ diff --git a/include/asm-sh64/gpio.h b/include/asm-sh64/gpio.h new file mode 100644 index 0000000..6bc5a13 --- /dev/null +++ b/include/asm-sh64/gpio.h @@ -0,0 +1,8 @@ +#ifndef __ASM_SH64_GPIO_H +#define __ASM_SH64_GPIO_H + +/* + * This is just a stub, so that every arch using sh-sci has a gpio.h + */ + +#endif /* __ASM_SH64_GPIO_H */ diff --git a/include/linux/maple.h b/include/linux/maple.h new file mode 100644 index 0000000..bad9a7b --- /dev/null +++ b/include/linux/maple.h @@ -0,0 +1,80 @@ +#ifndef __LINUX_MAPLE_H +#define __LINUX_MAPLE_H + +#include + +extern struct bus_type maple_bus_type; + +/* Maple Bus command and response codes */ +enum maple_code { + MAPLE_RESPONSE_FILEERR = -5, + MAPLE_RESPONSE_AGAIN = -4, /* request should be retransmitted */ + MAPLE_RESPONSE_BADCMD = -3, + MAPLE_RESPONSE_BADFUNC = -2, + MAPLE_RESPONSE_NONE = -1, /* unit didn't respond at all */ + MAPLE_COMMAND_DEVINFO = 1, + MAPLE_COMMAND_ALLINFO = 2, + MAPLE_COMMAND_RESET = 3, + MAPLE_COMMAND_KILL = 4, + MAPLE_RESPONSE_DEVINFO = 5, + MAPLE_RESPONSE_ALLINFO = 6, + MAPLE_RESPONSE_OK = 7, + MAPLE_RESPONSE_DATATRF = 8, + MAPLE_COMMAND_GETCOND = 9, + MAPLE_COMMAND_GETMINFO = 10, + MAPLE_COMMAND_BREAD = 11, + MAPLE_COMMAND_BWRITE = 12, + MAPLE_COMMAND_SETCOND = 14 +}; + +struct mapleq { + struct list_head list; + struct maple_device *dev; + void *sendbuf, *recvbuf, *recvbufdcsp; + unsigned char length; + enum maple_code command; +}; + +struct maple_devinfo { + unsigned long function; + unsigned long function_data[3]; + unsigned char area_code; + unsigned char connector_directon; + char product_name[31]; + char product_licence[61]; + unsigned short standby_power; + unsigned short max_power; +}; + +struct maple_device { + struct maple_driver *driver; + struct mapleq *mq; + void *private_data; + void (*callback) (struct mapleq * mq); + unsigned long when, interval, function; + struct maple_devinfo devinfo; + unsigned char port, unit; + char product_name[32]; + char product_licence[64]; + int registered; + struct device dev; +}; + +struct maple_driver { + unsigned long function; + int (*connect) (struct maple_device * dev); + void (*disconnect) (struct maple_device * dev); + struct device_driver drv; +}; + +void maple_getcond_callback(struct maple_device *dev, + void (*callback) (struct mapleq * mq), + unsigned long interval, + unsigned long function); +int maple_driver_register(struct device_driver *drv); +void maple_add_packet(struct mapleq *mq); + +#define to_maple_dev(n) container_of(n, struct maple_device, dev) +#define to_maple_driver(n) container_of(n, struct maple_driver, drv) + +#endif /* __LINUX_MAPLE_H */