From: "Huang, Ying" Add a document for EFI x86_64 boot support. The setup and operation guide of EFI based system is documented in Documentation/x86_64/uefi.txt. Signed-off-by: Chandramouli Narayanan Signed-off-by: Huang Ying Cc: Andi Kleen Cc: "Antonino A. Daplas" Signed-off-by: Andrew Morton --- Documentation/x86_64/uefi.txt | 29 +++++++++++++++++++++++++++++ 1 files changed, 29 insertions(+) diff -puN /dev/null Documentation/x86_64/uefi.txt --- /dev/null +++ a/Documentation/x86_64/uefi.txt @@ -0,0 +1,29 @@ +General note on [U]EFI x86_64 support +------------------------------------- + +The nomenclature EFI and UEFI are used interchangeably in this document. + +Although the tools below are _not_ needed for building the kernel, +the needed bootloader support and associated tools for x86_64 platforms +with EFI firmware and specifications are listed below. + +1. UEFI specification: http://www.uefi.org + +2. Booting Linux kernel on UEFI x86_64 platform requires bootloader + support. Elilo with x86_64 support can be used. + +3. x86_64 platform with EFI/UEFI firmware. + +Mechanics: +--------- +- Build the kernel with the following configuration. + CONFIG_FB_EFI=y + CONFIG_FRAMEBUFFER_CONSOLE=y +- Create a VFAT partition on the disk +- Copy the following to the VFAT partition: + elilo bootloader with x86_64 support, elilo configuration file, + kernel image built in first step and corresponding + initrd. Instructions on building elilo and its dependencies + can be found in the elilo sourceforge project. +- Boot to EFI shell and invoke elilo choosing the kernel image built + in first step. _