From: Bartlomiej Zolnierkiewicz Subject: [PATCH] Staging: rt28x0: fix comments in *.h files Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/staging/rt2860/ap.h | 6 drivers/staging/rt2860/chip/mac_pci.h | 1 drivers/staging/rt2860/chip/mac_usb.h | 140 +- drivers/staging/rt2860/chip/rt2860.h | 12 drivers/staging/rt2860/chip/rt2870.h | 6 drivers/staging/rt2860/chip/rt3070.h | 10 drivers/staging/rt2860/chip/rt3090.h | 16 drivers/staging/rt2860/chip/rt30xx.h | 4 drivers/staging/rt2860/chip/rtmp_mac.h | 1002 ++++++++++---------- drivers/staging/rt2860/chip/rtmp_phy.h | 84 - drivers/staging/rt2860/chlist.h | 10 drivers/staging/rt2860/eeprom.h | 10 drivers/staging/rt2860/mlme.h | 560 +++++------ drivers/staging/rt2860/oid.h | 380 +++---- drivers/staging/rt2860/rt_config.h | 4 drivers/staging/rt2860/rt_linux.h | 108 +- drivers/staging/rt2860/rtmp.h | 1628 ++++++++++++++++----------------- drivers/staging/rt2860/rtmp_chip.h | 196 +-- drivers/staging/rt2860/rtmp_ckipmic.h | 2 drivers/staging/rt2860/rtmp_def.h | 792 ++++++++-------- drivers/staging/rt2860/rtmp_dot11.h | 60 - drivers/staging/rt2860/rtmp_iface.h | 12 drivers/staging/rt2860/rtmp_mcu.h | 2 drivers/staging/rt2860/rtmp_os.h | 6 drivers/staging/rt2860/rtmp_timer.h | 32 drivers/staging/rt2860/rtmp_type.h | 26 drivers/staging/rt2860/rtusb_io.h | 118 +- drivers/staging/rt2860/spectrum.h | 2 drivers/staging/rt2860/spectrum_def.h | 4 drivers/staging/rt2860/wpa.h | 120 +- 30 files changed, 2676 insertions(+), 2677 deletions(-) Index: b/drivers/staging/rt2860/ap.h =================================================================== --- a/drivers/staging/rt2860/ap.h +++ b/drivers/staging/rt2860/ap.h @@ -40,7 +40,7 @@ #ifndef __AP_H__ #define __AP_H__ -// ap_wpa.c +/* ap_wpa.c */ VOID WpaStateMachineInit(IN PRTMP_ADAPTER pAd, IN STATE_MACHINE * Sm, OUT STATE_MACHINE_FUNC Trans[]); @@ -48,7 +48,7 @@ VOID WpaStateMachineInit(IN PRTMP_ADAPTE VOID BeaconUpdateExec(IN PVOID SystemSpecific1, IN PVOID FunctionContext, IN PVOID SystemSpecific2, IN PVOID SystemSpecific3); -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ VOID RTMPSetPiggyBack(IN PRTMP_ADAPTER pAd, IN BOOLEAN bPiggyBack); @@ -63,4 +63,4 @@ BOOLEAN MacTableDeleteEntry(IN PRTMP_ADA MAC_TABLE_ENTRY *MacTableLookup(IN PRTMP_ADAPTER pAd, IN PUCHAR pAddr); -#endif // __AP_H__ +#endif /* __AP_H__ */ Index: b/drivers/staging/rt2860/chip/mac_pci.h =================================================================== --- a/drivers/staging/rt2860/chip/mac_pci.h +++ b/drivers/staging/rt2860/chip/mac_pci.h @@ -178,7 +178,6 @@ typedef union _TX_ATTENUATION_CTRL_STRUC #define NEED_QUEUE_BACK_FOR_AGG(pAd, QueIdx, freeNum, _TxFrameType) \ (((freeNum != (TX_RING_SIZE-1)) && (pAd->TxSwQueue[QueIdx].Number == 0)) || (freeNum<3)) - /*(((freeNum) != (TX_RING_SIZE-1)) && (pAd->TxSwQueue[QueIdx].Number == 1 /*0*/)) */ #define HAL_KickOutMgmtTx(_pAd, _QueIdx, _pPacket, _pSrcBufVA, _SrcBufLen) \ RtmpPCIMgmtKickOut(_pAd, _QueIdx, _pPacket, _pSrcBufVA, _SrcBufLen) Index: b/drivers/staging/rt2860/chip/mac_usb.h =================================================================== --- a/drivers/staging/rt2860/chip/mac_usb.h +++ b/drivers/staging/rt2860/chip/mac_usb.h @@ -46,18 +46,18 @@ #define USB_CYC_CFG 0x02a4 #define BEACON_RING_SIZE 2 -#define MGMTPIPEIDX 0 // EP6 is highest priority +#define MGMTPIPEIDX 0 /* EP6 is highest priority */ -#define RTMP_PKT_TAIL_PADDING 11 // 3(max 4 byte padding) + 4 (last packet padding) + 4 (MaxBulkOutsize align padding) +#define RTMP_PKT_TAIL_PADDING 11 /* 3(max 4 byte padding) + 4 (last packet padding) + 4 (MaxBulkOutsize align padding) */ #define fRTMP_ADAPTER_NEED_STOP_TX \ (fRTMP_ADAPTER_NIC_NOT_EXIST | fRTMP_ADAPTER_HALT_IN_PROGRESS | \ fRTMP_ADAPTER_RESET_IN_PROGRESS | fRTMP_ADAPTER_BULKOUT_RESET | \ fRTMP_ADAPTER_RADIO_OFF | fRTMP_ADAPTER_REMOVE_IN_PROGRESS) -// -// RXINFO appends at the end of each rx packet. -// +/* */ +/* RXINFO appends at the end of each rx packet. */ +/* */ #define RXINFO_SIZE 4 #define RT2870_RXDMALEN_FIELD_SIZE 4 @@ -66,17 +66,17 @@ typedef struct PACKED _RXINFO_STRUC { UINT32 DATA:1; UINT32 NULLDATA:1; UINT32 FRAG:1; - UINT32 U2M:1; // 1: this RX frame is unicast to me - UINT32 Mcast:1; // 1: this is a multicast frame - UINT32 Bcast:1; // 1: this is a broadcast frame - UINT32 MyBss:1; // 1: this frame belongs to the same BSSID - UINT32 Crc:1; // 1: CRC error - UINT32 CipherErr:2; // 0: decryption okay, 1:ICV error, 2:MIC error, 3:KEY not valid - UINT32 AMSDU:1; // rx with 802.3 header, not 802.11 header. + UINT32 U2M:1; /* 1: this RX frame is unicast to me */ + UINT32 Mcast:1; /* 1: this is a multicast frame */ + UINT32 Bcast:1; /* 1: this is a broadcast frame */ + UINT32 MyBss:1; /* 1: this frame belongs to the same BSSID */ + UINT32 Crc:1; /* 1: CRC error */ + UINT32 CipherErr:2; /* 0: decryption okay, 1:ICV error, 2:MIC error, 3:KEY not valid */ + UINT32 AMSDU:1; /* rx with 802.3 header, not 802.11 header. */ UINT32 HTC:1; UINT32 RSSI:1; UINT32 L2PAD:1; - UINT32 AMPDU:1; // To be moved + UINT32 AMPDU:1; /* To be moved */ UINT32 Decrypted:1; UINT32 PlcpRssil:1; UINT32 CipherAlg:1; @@ -84,35 +84,35 @@ typedef struct PACKED _RXINFO_STRUC { UINT32 PlcpSignal:12; } RXINFO_STRUC, *PRXINFO_STRUC, RT28XX_RXD_STRUC, *PRT28XX_RXD_STRUC; -// -// TXINFO -// +/* */ +/* TXINFO */ +/* */ #define TXINFO_SIZE 4 typedef struct _TXINFO_STRUC { - // Word 0 - UINT32 USBDMATxPktLen:16; //used ONLY in USB bulk Aggregation, Total byte counts of all sub-frame. + /* Word 0 */ + UINT32 USBDMATxPktLen:16; /*used ONLY in USB bulk Aggregation, Total byte counts of all sub-frame. */ UINT32 rsv:8; - UINT32 WIV:1; // Wireless Info Valid. 1 if Driver already fill WI, o if DMA needs to copy WI to correctposition - UINT32 QSEL:2; // select on-chip FIFO ID for 2nd-stage output scheduler.0:MGMT, 1:HCCA 2:EDCA - UINT32 SwUseLastRound:1; // Software use. - UINT32 rsv2:2; // Software use. - UINT32 USBDMANextVLD:1; //used ONLY in USB bulk Aggregation, NextValid - UINT32 USBDMATxburst:1; //used ONLY in USB bulk Aggre. Force USB DMA transmit frame from current selected endpoint + UINT32 WIV:1; /* Wireless Info Valid. 1 if Driver already fill WI, o if DMA needs to copy WI to correctposition */ + UINT32 QSEL:2; /* select on-chip FIFO ID for 2nd-stage output scheduler.0:MGMT, 1:HCCA 2:EDCA */ + UINT32 SwUseLastRound:1; /* Software use. */ + UINT32 rsv2:2; /* Software use. */ + UINT32 USBDMANextVLD:1; /*used ONLY in USB bulk Aggregation, NextValid */ + UINT32 USBDMATxburst:1; /*used ONLY in USB bulk Aggre. Force USB DMA transmit frame from current selected endpoint */ } TXINFO_STRUC, *PTXINFO_STRUC; -// -// Management ring buffer format -// +/* */ +/* Management ring buffer format */ +/* */ typedef struct _MGMT_STRUC { BOOLEAN Valid; PUCHAR pBuffer; ULONG Length; } MGMT_STRUC, *PMGMT_STRUC; -//////////////////////////////////////////////////////////////////////////// -// The TX_BUFFER structure forms the transmitted USB packet to the device -//////////////////////////////////////////////////////////////////////////// +/*////////////////////////////////////////////////////////////////////////// */ +/* The TX_BUFFER structure forms the transmitted USB packet to the device */ +/*////////////////////////////////////////////////////////////////////////// */ typedef struct __TX_BUFFER { union { UCHAR WirelessPacket[TX_BUFFER_NORMSIZE]; @@ -120,7 +120,7 @@ typedef struct __TX_BUFFER { PSPOLL_FRAME PsPollPacket; RTS_FRAME RTSFrame; } field; - UCHAR Aggregation[4]; //Buffer for save Aggregation size. + UCHAR Aggregation[4]; /*Buffer for save Aggregation size. */ } TX_BUFFER, *PTX_BUFFER; typedef struct __HTTX_BUFFER { @@ -130,22 +130,22 @@ typedef struct __HTTX_BUFFER { PSPOLL_FRAME PsPollPacket; RTS_FRAME RTSFrame; } field; - UCHAR Aggregation[4]; //Buffer for save Aggregation size. + UCHAR Aggregation[4]; /*Buffer for save Aggregation size. */ } HTTX_BUFFER, *PHTTX_BUFFER; -// used to track driver-generated write irps +/* used to track driver-generated write irps */ typedef struct _TX_CONTEXT { - PVOID pAd; //Initialized in MiniportInitialize - PURB pUrb; //Initialized in MiniportInitialize - PIRP pIrp; //used to cancel pending bulk out. - //Initialized in MiniportInitialize - PTX_BUFFER TransferBuffer; //Initialized in MiniportInitialize + PVOID pAd; /*Initialized in MiniportInitialize */ + PURB pUrb; /*Initialized in MiniportInitialize */ + PIRP pIrp; /*used to cancel pending bulk out. */ + /*Initialized in MiniportInitialize */ + PTX_BUFFER TransferBuffer; /*Initialized in MiniportInitialize */ ULONG BulkOutSize; UCHAR BulkOutPipeId; UCHAR SelfIdx; BOOLEAN InUse; - BOOLEAN bWaitingBulkOut; // at least one packet is in this TxContext, ready for making IRP anytime. - BOOLEAN bFullForBulkOut; // all tx buffer are full , so waiting for tx bulkout. + BOOLEAN bWaitingBulkOut; /* at least one packet is in this TxContext, ready for making IRP anytime. */ + BOOLEAN bFullForBulkOut; /* all tx buffer are full , so waiting for tx bulkout. */ BOOLEAN IRPPending; BOOLEAN LastOne; BOOLEAN bAggregatible; @@ -153,18 +153,18 @@ typedef struct _TX_CONTEXT { UCHAR Rsv[2]; ULONG DataOffset; UINT TxRate; - dma_addr_t data_dma; // urb dma on linux + dma_addr_t data_dma; /* urb dma on linux */ } TX_CONTEXT, *PTX_CONTEXT, **PPTX_CONTEXT; -// used to track driver-generated write irps +/* used to track driver-generated write irps */ typedef struct _HT_TX_CONTEXT { - PVOID pAd; //Initialized in MiniportInitialize - PURB pUrb; //Initialized in MiniportInitialize - PIRP pIrp; //used to cancel pending bulk out. - //Initialized in MiniportInitialize - PHTTX_BUFFER TransferBuffer; //Initialized in MiniportInitialize - ULONG BulkOutSize; // Indicate the total bulk-out size in bytes in one bulk-transmission + PVOID pAd; /*Initialized in MiniportInitialize */ + PURB pUrb; /*Initialized in MiniportInitialize */ + PIRP pIrp; /*used to cancel pending bulk out. */ + /*Initialized in MiniportInitialize */ + PHTTX_BUFFER TransferBuffer; /*Initialized in MiniportInitialize */ + ULONG BulkOutSize; /* Indicate the total bulk-out size in bytes in one bulk-transmission */ UCHAR BulkOutPipeId; BOOLEAN IRPPending; BOOLEAN LastOne; @@ -173,33 +173,33 @@ typedef struct _HT_TX_CONTEXT { BOOLEAN bCopySavePad; UCHAR SavedPad[8]; UCHAR Header_802_3[LENGTH_802_3]; - ULONG CurWritePosition; // Indicate the buffer offset which packet will be inserted start from. - ULONG CurWriteRealPos; // Indicate the buffer offset which packet now are writing to. - ULONG NextBulkOutPosition; // Indicate the buffer start offset of a bulk-transmission - ULONG ENextBulkOutPosition; // Indicate the buffer end offset of a bulk-transmission + ULONG CurWritePosition; /* Indicate the buffer offset which packet will be inserted start from. */ + ULONG CurWriteRealPos; /* Indicate the buffer offset which packet now are writing to. */ + ULONG NextBulkOutPosition; /* Indicate the buffer start offset of a bulk-transmission */ + ULONG ENextBulkOutPosition; /* Indicate the buffer end offset of a bulk-transmission */ UINT TxRate; - dma_addr_t data_dma; // urb dma on linux + dma_addr_t data_dma; /* urb dma on linux */ } HT_TX_CONTEXT, *PHT_TX_CONTEXT, **PPHT_TX_CONTEXT; -// -// Structure to keep track of receive packets and buffers to indicate -// receive data to the protocol. -// +/* */ +/* Structure to keep track of receive packets and buffers to indicate */ +/* receive data to the protocol. */ +/* */ typedef struct _RX_CONTEXT { PUCHAR TransferBuffer; PVOID pAd; - PIRP pIrp; //used to cancel pending bulk in. + PIRP pIrp; /*used to cancel pending bulk in. */ PURB pUrb; - //These 2 Boolean shouldn't both be 1 at the same time. - ULONG BulkInOffset; // number of packets waiting for reordering . -// BOOLEAN ReorderInUse; // At least one packet in this buffer are in reordering buffer and wait for receive indication - BOOLEAN bRxHandling; // Notify this packet is being process now. - BOOLEAN InUse; // USB Hardware Occupied. Wait for USB HW to put packet. - BOOLEAN Readable; // Receive Complete back. OK for driver to indicate receiving packet. - BOOLEAN IRPPending; // TODO: To be removed + /*These 2 Boolean shouldn't both be 1 at the same time. */ + ULONG BulkInOffset; /* number of packets waiting for reordering . */ +/* BOOLEAN ReorderInUse; // At least one packet in this buffer are in reordering buffer and wait for receive indication */ + BOOLEAN bRxHandling; /* Notify this packet is being process now. */ + BOOLEAN InUse; /* USB Hardware Occupied. Wait for USB HW to put packet. */ + BOOLEAN Readable; /* Receive Complete back. OK for driver to indicate receiving packet. */ + BOOLEAN IRPPending; /* TODO: To be removed */ atomic_t IrpLock; NDIS_SPIN_LOCK RxContextLock; - dma_addr_t data_dma; // urb dma on linux + dma_addr_t data_dma; /* urb dma on linux */ } RX_CONTEXT, *PRX_CONTEXT; /****************************************************************************** @@ -207,9 +207,9 @@ typedef struct _RX_CONTEXT { USB Frimware Related MACRO ******************************************************************************/ -// 8051 firmware image for usb - use last-half base address = 0x3000 +/* 8051 firmware image for usb - use last-half base address = 0x3000 */ #define FIRMWARE_IMAGE_BASE 0x3000 -#define MAX_FIRMWARE_IMAGE_SIZE 0x1000 // 4kbyte +#define MAX_FIRMWARE_IMAGE_SIZE 0x1000 /* 4kbyte */ #define RTMP_WRITE_FIRMWARE(_pAd, _pFwImage, _FwLen) \ RTUSBFirmwareWrite(_pAd, _pFwImage, _FwLen) @@ -278,7 +278,7 @@ typedef struct _RX_CONTEXT { #define HAL_KickOutNullFrameTx(_pAd, _QueIdx, _pNullFrame, _frameLen) \ RtmpUSBNullFrameKickOut(_pAd, _QueIdx, _pNullFrame, _frameLen) -#define GET_TXRING_FREENO(_pAd, _QueIdx) (_QueIdx) //(_pAd->TxRing[_QueIdx].TxSwFreeIdx) +#define GET_TXRING_FREENO(_pAd, _QueIdx) (_QueIdx) /*(_pAd->TxRing[_QueIdx].TxSwFreeIdx) */ #define GET_MGMTRING_FREENO(_pAd) (_pAd->MgmtRing.TxSwFreeIdx) /* ----------------- RX Related MACRO ----------------- */ @@ -344,4 +344,4 @@ typedef struct _RX_CONTEXT { #define RTMP_MLME_RADIO_OFF(pAd) \ RT28xxUsbMlmeRadioOFF(pAd); -#endif //__MAC_USB_H__ // +#endif /*__MAC_USB_H__ // */ Index: b/drivers/staging/rt2860/chip/rt2860.h =================================================================== --- a/drivers/staging/rt2860/chip/rt2860.h +++ b/drivers/staging/rt2860/chip/rt2860.h @@ -38,17 +38,17 @@ #error "For RT2880, you should define the compile flag -DRTMP_MAC_PCI" #endif -// -// Device ID & Vendor ID, these values should match EEPROM value -// +/* */ +/* Device ID & Vendor ID, these values should match EEPROM value */ +/* */ #define NIC2860_PCI_DEVICE_ID 0x0601 #define NIC2860_PCIe_DEVICE_ID 0x0681 -#define NIC2760_PCI_DEVICE_ID 0x0701 // 1T/2R Cardbus ??? -#define NIC2790_PCIe_DEVICE_ID 0x0781 // 1T/2R miniCard +#define NIC2760_PCI_DEVICE_ID 0x0701 /* 1T/2R Cardbus ??? */ +#define NIC2790_PCIe_DEVICE_ID 0x0781 /* 1T/2R miniCard */ #define VEN_AWT_PCIe_DEVICE_ID 0x1059 #define VEN_AWT_PCI_VENDOR_ID 0x1A3B #define EDIMAX_PCI_VENDOR_ID 0x1432 -#endif //__RT2860_H__ // +#endif /*__RT2860_H__ // */ Index: b/drivers/staging/rt2860/chip/rt2870.h =================================================================== --- a/drivers/staging/rt2860/chip/rt2870.h +++ b/drivers/staging/rt2860/chip/rt2870.h @@ -40,7 +40,7 @@ #include "../rtmp_type.h" #include "mac_usb.h" -//#define RTMP_CHIP_NAME "RT2870" +/*#define RTMP_CHIP_NAME "RT2870" */ -#endif // RT2870 // -#endif //__RT2870_H__ // +#endif /* RT2870 // */ +#endif /*__RT2870_H__ // */ Index: b/drivers/staging/rt2860/chip/rt3070.h =================================================================== --- a/drivers/staging/rt2860/chip/rt3070.h +++ b/drivers/staging/rt2860/chip/rt3070.h @@ -58,10 +58,10 @@ #include "mac_usb.h" #include "rt30xx.h" -// -// Device ID & Vendor ID, these values should match EEPROM value -// +/* */ +/* Device ID & Vendor ID, these values should match EEPROM value */ +/* */ -#endif // RT3070 // +#endif /* RT3070 // */ -#endif //__RT3070_H__ // +#endif /*__RT3070_H__ // */ Index: b/drivers/staging/rt2860/chip/rt3090.h =================================================================== --- a/drivers/staging/rt2860/chip/rt3090.h +++ b/drivers/staging/rt2860/chip/rt3090.h @@ -60,13 +60,13 @@ #include "mac_pci.h" #include "rt30xx.h" -// -// Device ID & Vendor ID, these values should match EEPROM value -// -#define NIC3090_PCIe_DEVICE_ID 0x3090 // 1T/1R miniCard -#define NIC3091_PCIe_DEVICE_ID 0x3091 // 1T/2R miniCard -#define NIC3092_PCIe_DEVICE_ID 0x3092 // 2T/2R miniCard +/* */ +/* Device ID & Vendor ID, these values should match EEPROM value */ +/* */ +#define NIC3090_PCIe_DEVICE_ID 0x3090 /* 1T/1R miniCard */ +#define NIC3091_PCIe_DEVICE_ID 0x3091 /* 1T/2R miniCard */ +#define NIC3092_PCIe_DEVICE_ID 0x3092 /* 2T/2R miniCard */ -#endif // RT3090 // +#endif /* RT3090 // */ -#endif //__RT3090_H__ // +#endif /*__RT3090_H__ // */ Index: b/drivers/staging/rt2860/chip/rt30xx.h =================================================================== --- a/drivers/staging/rt2860/chip/rt30xx.h +++ b/drivers/staging/rt2860/chip/rt30xx.h @@ -42,6 +42,6 @@ extern REG_PAIR RT30xx_RFRegTable[]; extern UCHAR NUM_RF_REG_PARMS; -#endif // RT30xx // +#endif /* RT30xx // */ -#endif //__RT30XX_H__ // +#endif /*__RT30XX_H__ // */ Index: b/drivers/staging/rt2860/chip/rtmp_mac.h =================================================================== --- a/drivers/staging/rt2860/chip/rtmp_mac.h +++ b/drivers/staging/rt2860/chip/rtmp_mac.h @@ -38,70 +38,70 @@ #ifndef __RTMP_MAC_H__ #define __RTMP_MAC_H__ -// ================================================================================= -// TX / RX ring descriptor format -// ================================================================================= +/* ================================================================================= */ +/* TX / RX ring descriptor format */ +/* ================================================================================= */ -// the first 24-byte in TXD is called TXINFO and will be DMAed to MAC block through TXFIFO. -// MAC block use this TXINFO to control the transmission behavior of this frame. +/* the first 24-byte in TXD is called TXINFO and will be DMAed to MAC block through TXFIFO. */ +/* MAC block use this TXINFO to control the transmission behavior of this frame. */ #define FIFO_MGMT 0 #define FIFO_HCCA 1 #define FIFO_EDCA 2 -// -// TXD Wireless Information format for Tx ring and Mgmt Ring -// -//txop : for txop mode -// 0:txop for the MPDU frame will be handles by ASIC by register -// 1/2/3:the MPDU frame is send after PIFS/backoff/SIFS +/* */ +/* TXD Wireless Information format for Tx ring and Mgmt Ring */ +/* */ +/*txop : for txop mode */ +/* 0:txop for the MPDU frame will be handles by ASIC by register */ +/* 1/2/3:the MPDU frame is send after PIFS/backoff/SIFS */ typedef struct PACKED _TXWI_STRUC { - // Word 0 - // ex: 00 03 00 40 means txop = 3, PHYMODE = 1 - UINT32 FRAG:1; // 1 to inform TKIP engine this is a fragment. - UINT32 MIMOps:1; // the remote peer is in dynamic MIMO-PS mode + /* Word 0 */ + /* ex: 00 03 00 40 means txop = 3, PHYMODE = 1 */ + UINT32 FRAG:1; /* 1 to inform TKIP engine this is a fragment. */ + UINT32 MIMOps:1; /* the remote peer is in dynamic MIMO-PS mode */ UINT32 CFACK:1; UINT32 TS:1; UINT32 AMPDU:1; UINT32 MpduDensity:3; - UINT32 txop:2; //FOR "THIS" frame. 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs only when previous frame exchange is successful. + UINT32 txop:2; /*FOR "THIS" frame. 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs only when previous frame exchange is successful. */ UINT32 rsv:6; UINT32 MCS:7; - UINT32 BW:1; //channel bandwidth 20MHz or 40 MHz + UINT32 BW:1; /*channel bandwidth 20MHz or 40 MHz */ UINT32 ShortGI:1; - UINT32 STBC:2; // 1: STBC support MCS =0-7, 2,3 : RESERVE - UINT32 Ifs:1; // -// UINT32 rsv2:2; //channel bandwidth 20MHz or 40 MHz + UINT32 STBC:2; /* 1: STBC support MCS =0-7, 2,3 : RESERVE */ + UINT32 Ifs:1; /* */ +/* UINT32 rsv2:2; //channel bandwidth 20MHz or 40 MHz */ UINT32 rsv2:1; - UINT32 TxBF:1; // 3*3 + UINT32 TxBF:1; /* 3*3 */ UINT32 PHYMODE:2; - // Word1 - // ex: 1c ff 38 00 means ACK=0, BAWinSize=7, MPDUtotalByteCount = 0x38 + /* Word1 */ + /* ex: 1c ff 38 00 means ACK=0, BAWinSize=7, MPDUtotalByteCount = 0x38 */ UINT32 ACK:1; UINT32 NSEQ:1; UINT32 BAWinSize:6; UINT32 WirelessCliID:8; UINT32 MPDUtotalByteCount:12; UINT32 PacketId:4; - //Word2 + /*Word2 */ UINT32 IV; - //Word3 + /*Word3 */ UINT32 EIV; } TXWI_STRUC, *PTXWI_STRUC; -// -// RXWI wireless information format, in PBF. invisible in driver. -// +/* */ +/* RXWI wireless information format, in PBF. invisible in driver. */ +/* */ typedef struct PACKED _RXWI_STRUC { - // Word 0 + /* Word 0 */ UINT32 WirelessCliID:8; UINT32 KeyIndex:2; UINT32 BSSID:3; UINT32 UDF:3; UINT32 MPDUtotalByteCount:12; UINT32 TID:4; - // Word 1 + /* Word 1 */ UINT32 FRAG:4; UINT32 SEQUENCE:12; UINT32 MCS:7; @@ -109,29 +109,29 @@ typedef struct PACKED _RXWI_STRUC { UINT32 ShortGI:1; UINT32 STBC:2; UINT32 rsv:3; - UINT32 PHYMODE:2; // 1: this RX frame is unicast to me - //Word2 + UINT32 PHYMODE:2; /* 1: this RX frame is unicast to me */ + /*Word2 */ UINT32 RSSI0:8; UINT32 RSSI1:8; UINT32 RSSI2:8; UINT32 rsv1:8; - //Word3 + /*Word3 */ UINT32 SNR0:8; UINT32 SNR1:8; - UINT32 FOFFSET:8; // RT35xx + UINT32 FOFFSET:8; /* RT35xx */ UINT32 rsv2:8; /*UINT32 rsv2:16; */ } RXWI_STRUC, *PRXWI_STRUC; -// ================================================================================= -// Register format -// ================================================================================= - -// -// SCH/DMA registers - base address 0x0200 -// -// INT_SOURCE_CSR: Interrupt source register. Write one to clear corresponding bit -// +/* ================================================================================= */ +/* Register format */ +/* ================================================================================= */ + +/* */ +/* SCH/DMA registers - base address 0x0200 */ +/* */ +/* INT_SOURCE_CSR: Interrupt source register. Write one to clear corresponding bit */ +/* */ #define DMA_CSR0 0x200 #define INT_SOURCE_CSR 0x200 typedef union _INT_SOURCE_CSR_STRUC { @@ -139,29 +139,29 @@ typedef union _INT_SOURCE_CSR_STRUC { UINT32 RxDelayINT:1; UINT32 TxDelayINT:1; UINT32 RxDone:1; - UINT32 Ac0DmaDone:1; //4 + UINT32 Ac0DmaDone:1; /*4 */ UINT32 Ac1DmaDone:1; UINT32 Ac2DmaDone:1; UINT32 Ac3DmaDone:1; - UINT32 HccaDmaDone:1; // bit7 + UINT32 HccaDmaDone:1; /* bit7 */ UINT32 MgmtDmaDone:1; - UINT32 MCUCommandINT:1; //bit 9 + UINT32 MCUCommandINT:1; /*bit 9 */ UINT32 RxTxCoherent:1; UINT32 TBTTInt:1; UINT32 PreTBTT:1; - UINT32 TXFifoStatusInt:1; //FIFO Statistics is full, sw should read 0x171c - UINT32 AutoWakeup:1; //bit14 + UINT32 TXFifoStatusInt:1; /*FIFO Statistics is full, sw should read 0x171c */ + UINT32 AutoWakeup:1; /*bit14 */ UINT32 GPTimer:1; - UINT32 RxCoherent:1; //bit16 + UINT32 RxCoherent:1; /*bit16 */ UINT32 TxCoherent:1; UINT32:14; } field; UINT32 word; } INT_SOURCE_CSR_STRUC, *PINT_SOURCE_CSR_STRUC; -// -// INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF -// +/* */ +/* INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF */ +/* */ #define INT_MASK_CSR 0x204 typedef union _INT_MASK_CSR_STRUC { struct { @@ -228,99 +228,99 @@ typedef union _DELAY_INT_CFG_STRUC { #define WMM_AIFSN_CFG 0x0214 typedef union _AIFSN_CSR_STRUC { struct { - UINT32 Aifsn0:4; // for AC_BE - UINT32 Aifsn1:4; // for AC_BK - UINT32 Aifsn2:4; // for AC_VI - UINT32 Aifsn3:4; // for AC_VO + UINT32 Aifsn0:4; /* for AC_BE */ + UINT32 Aifsn1:4; /* for AC_BK */ + UINT32 Aifsn2:4; /* for AC_VI */ + UINT32 Aifsn3:4; /* for AC_VO */ UINT32 Rsv:16; } field; UINT32 word; } AIFSN_CSR_STRUC, *PAIFSN_CSR_STRUC; -// -// CWMIN_CSR: CWmin for each EDCA AC -// +/* */ +/* CWMIN_CSR: CWmin for each EDCA AC */ +/* */ #define WMM_CWMIN_CFG 0x0218 typedef union _CWMIN_CSR_STRUC { struct { - UINT32 Cwmin0:4; // for AC_BE - UINT32 Cwmin1:4; // for AC_BK - UINT32 Cwmin2:4; // for AC_VI - UINT32 Cwmin3:4; // for AC_VO + UINT32 Cwmin0:4; /* for AC_BE */ + UINT32 Cwmin1:4; /* for AC_BK */ + UINT32 Cwmin2:4; /* for AC_VI */ + UINT32 Cwmin3:4; /* for AC_VO */ UINT32 Rsv:16; } field; UINT32 word; } CWMIN_CSR_STRUC, *PCWMIN_CSR_STRUC; -// -// CWMAX_CSR: CWmin for each EDCA AC -// +/* */ +/* CWMAX_CSR: CWmin for each EDCA AC */ +/* */ #define WMM_CWMAX_CFG 0x021c typedef union _CWMAX_CSR_STRUC { struct { - UINT32 Cwmax0:4; // for AC_BE - UINT32 Cwmax1:4; // for AC_BK - UINT32 Cwmax2:4; // for AC_VI - UINT32 Cwmax3:4; // for AC_VO + UINT32 Cwmax0:4; /* for AC_BE */ + UINT32 Cwmax1:4; /* for AC_BK */ + UINT32 Cwmax2:4; /* for AC_VI */ + UINT32 Cwmax3:4; /* for AC_VO */ UINT32 Rsv:16; } field; UINT32 word; } CWMAX_CSR_STRUC, *PCWMAX_CSR_STRUC; -// -// AC_TXOP_CSR0: AC_BK/AC_BE TXOP register -// +/* */ +/* AC_TXOP_CSR0: AC_BK/AC_BE TXOP register */ +/* */ #define WMM_TXOP0_CFG 0x0220 typedef union _AC_TXOP_CSR0_STRUC { struct { - USHORT Ac0Txop; // for AC_BK, in unit of 32us - USHORT Ac1Txop; // for AC_BE, in unit of 32us + USHORT Ac0Txop; /* for AC_BK, in unit of 32us */ + USHORT Ac1Txop; /* for AC_BE, in unit of 32us */ } field; UINT32 word; } AC_TXOP_CSR0_STRUC, *PAC_TXOP_CSR0_STRUC; -// -// AC_TXOP_CSR1: AC_VO/AC_VI TXOP register -// +/* */ +/* AC_TXOP_CSR1: AC_VO/AC_VI TXOP register */ +/* */ #define WMM_TXOP1_CFG 0x0224 typedef union _AC_TXOP_CSR1_STRUC { struct { - USHORT Ac2Txop; // for AC_VI, in unit of 32us - USHORT Ac3Txop; // for AC_VO, in unit of 32us + USHORT Ac2Txop; /* for AC_VI, in unit of 32us */ + USHORT Ac3Txop; /* for AC_VO, in unit of 32us */ } field; UINT32 word; } AC_TXOP_CSR1_STRUC, *PAC_TXOP_CSR1_STRUC; #define RINGREG_DIFF 0x10 -#define GPIO_CTRL_CFG 0x0228 //MAC_CSR13 +#define GPIO_CTRL_CFG 0x0228 /*MAC_CSR13 */ #define MCU_CMD_CFG 0x022c -#define TX_BASE_PTR0 0x0230 //AC_BK base address +#define TX_BASE_PTR0 0x0230 /*AC_BK base address */ #define TX_MAX_CNT0 0x0234 #define TX_CTX_IDX0 0x0238 #define TX_DTX_IDX0 0x023c -#define TX_BASE_PTR1 0x0240 //AC_BE base address +#define TX_BASE_PTR1 0x0240 /*AC_BE base address */ #define TX_MAX_CNT1 0x0244 #define TX_CTX_IDX1 0x0248 #define TX_DTX_IDX1 0x024c -#define TX_BASE_PTR2 0x0250 //AC_VI base address +#define TX_BASE_PTR2 0x0250 /*AC_VI base address */ #define TX_MAX_CNT2 0x0254 #define TX_CTX_IDX2 0x0258 #define TX_DTX_IDX2 0x025c -#define TX_BASE_PTR3 0x0260 //AC_VO base address +#define TX_BASE_PTR3 0x0260 /*AC_VO base address */ #define TX_MAX_CNT3 0x0264 #define TX_CTX_IDX3 0x0268 #define TX_DTX_IDX3 0x026c -#define TX_BASE_PTR4 0x0270 //HCCA base address +#define TX_BASE_PTR4 0x0270 /*HCCA base address */ #define TX_MAX_CNT4 0x0274 #define TX_CTX_IDX4 0x0278 #define TX_DTX_IDX4 0x027c -#define TX_BASE_PTR5 0x0280 //MGMT base address +#define TX_BASE_PTR5 0x0280 /*MGMT base address */ #define TX_MAX_CNT5 0x0284 #define TX_CTX_IDX5 0x0288 #define TX_DTX_IDX5 0x028c #define TX_MGMTMAX_CNT TX_MAX_CNT5 #define TX_MGMTCTX_IDX TX_CTX_IDX5 #define TX_MGMTDTX_IDX TX_DTX_IDX5 -#define RX_BASE_PTR 0x0290 //RX base address +#define RX_BASE_PTR 0x0290 /*RX base address */ #define RX_MAX_CNT 0x0294 #define RX_CRX_IDX 0x0298 #define RX_DRX_IDX 0x029c @@ -328,27 +328,27 @@ typedef union _AC_TXOP_CSR1_STRUC { #define USB_DMA_CFG 0x02a0 typedef union _USB_DMA_CFG_STRUC { struct { - UINT32 RxBulkAggTOut:8; //Rx Bulk Aggregation TimeOut in unit of 33ns - UINT32 RxBulkAggLmt:8; //Rx Bulk Aggregation Limit in unit of 256 bytes - UINT32 phyclear:1; //phy watch dog enable. write 1 + UINT32 RxBulkAggTOut:8; /*Rx Bulk Aggregation TimeOut in unit of 33ns */ + UINT32 RxBulkAggLmt:8; /*Rx Bulk Aggregation Limit in unit of 256 bytes */ + UINT32 phyclear:1; /*phy watch dog enable. write 1 */ UINT32 rsv:2; - UINT32 TxClear:1; //Clear USB DMA TX path - UINT32 TxopHalt:1; //Halt TXOP count down when TX buffer is full. - UINT32 RxBulkAggEn:1; //Enable Rx Bulk Aggregation - UINT32 RxBulkEn:1; //Enable USB DMA Rx - UINT32 TxBulkEn:1; //Enable USB DMA Tx - UINT32 EpoutValid:6; //OUT endpoint data valid - UINT32 RxBusy:1; //USB DMA RX FSM busy - UINT32 TxBusy:1; //USB DMA TX FSM busy + UINT32 TxClear:1; /*Clear USB DMA TX path */ + UINT32 TxopHalt:1; /*Halt TXOP count down when TX buffer is full. */ + UINT32 RxBulkAggEn:1; /*Enable Rx Bulk Aggregation */ + UINT32 RxBulkEn:1; /*Enable USB DMA Rx */ + UINT32 TxBulkEn:1; /*Enable USB DMA Tx */ + UINT32 EpoutValid:6; /*OUT endpoint data valid */ + UINT32 RxBusy:1; /*USB DMA RX FSM busy */ + UINT32 TxBusy:1; /*USB DMA TX FSM busy */ } field; UINT32 word; } USB_DMA_CFG_STRUC, *PUSB_DMA_CFG_STRUC; -// -// 3 PBF registers -// -// -// Most are for debug. Driver doesn't touch PBF register. +/* */ +/* 3 PBF registers */ +/* */ +/* */ +/* Most are for debug. Driver doesn't touch PBF register. */ #define PBF_SYS_CTRL 0x0400 #define PBF_CFG 0x0408 #define PBF_MAX_PCNT 0x040C @@ -361,224 +361,224 @@ typedef union _USB_DMA_CFG_STRUC { #ifdef RT30xx #ifdef RTMP_EFUSE_SUPPORT -// eFuse registers +/* eFuse registers */ #define EFUSE_CTRL 0x0580 #define EFUSE_DATA0 0x0590 #define EFUSE_DATA1 0x0594 #define EFUSE_DATA2 0x0598 #define EFUSE_DATA3 0x059c -#endif // RTMP_EFUSE_SUPPORT // -#endif // RT30xx // +#endif /* RTMP_EFUSE_SUPPORT // */ +#endif /* RT30xx // */ #define OSC_CTRL 0x5a4 #define PCIE_PHY_TX_ATTENUATION_CTRL 0x05C8 #define LDO_CFG0 0x05d4 #define GPIO_SWITCH 0x05dc -// -// 4 MAC registers -// -// -// 4.1 MAC SYSTEM configuration registers (offset:0x1000) -// +/* */ +/* 4 MAC registers */ +/* */ +/* */ +/* 4.1 MAC SYSTEM configuration registers (offset:0x1000) */ +/* */ #define MAC_CSR0 0x1000 typedef union _ASIC_VER_ID_STRUC { struct { - USHORT ASICRev; // reversion : 0 - USHORT ASICVer; // version : 2860 + USHORT ASICRev; /* reversion : 0 */ + USHORT ASICVer; /* version : 2860 */ } field; UINT32 word; } ASIC_VER_ID_STRUC, *PASIC_VER_ID_STRUC; -#define MAC_SYS_CTRL 0x1004 //MAC_CSR1 -#define MAC_ADDR_DW0 0x1008 // MAC ADDR DW0 -#define MAC_ADDR_DW1 0x100c // MAC ADDR DW1 -// -// MAC_CSR2: STA MAC register 0 -// +#define MAC_SYS_CTRL 0x1004 /*MAC_CSR1 */ +#define MAC_ADDR_DW0 0x1008 /* MAC ADDR DW0 */ +#define MAC_ADDR_DW1 0x100c /* MAC ADDR DW1 */ +/* */ +/* MAC_CSR2: STA MAC register 0 */ +/* */ typedef union _MAC_DW0_STRUC { struct { - UCHAR Byte0; // MAC address byte 0 - UCHAR Byte1; // MAC address byte 1 - UCHAR Byte2; // MAC address byte 2 - UCHAR Byte3; // MAC address byte 3 + UCHAR Byte0; /* MAC address byte 0 */ + UCHAR Byte1; /* MAC address byte 1 */ + UCHAR Byte2; /* MAC address byte 2 */ + UCHAR Byte3; /* MAC address byte 3 */ } field; UINT32 word; } MAC_DW0_STRUC, *PMAC_DW0_STRUC; -// -// MAC_CSR3: STA MAC register 1 -// +/* */ +/* MAC_CSR3: STA MAC register 1 */ +/* */ typedef union _MAC_DW1_STRUC { struct { - UCHAR Byte4; // MAC address byte 4 - UCHAR Byte5; // MAC address byte 5 + UCHAR Byte4; /* MAC address byte 4 */ + UCHAR Byte5; /* MAC address byte 5 */ UCHAR U2MeMask; UCHAR Rsvd1; } field; UINT32 word; } MAC_DW1_STRUC, *PMAC_DW1_STRUC; -#define MAC_BSSID_DW0 0x1010 // MAC BSSID DW0 -#define MAC_BSSID_DW1 0x1014 // MAC BSSID DW1 +#define MAC_BSSID_DW0 0x1010 /* MAC BSSID DW0 */ +#define MAC_BSSID_DW1 0x1014 /* MAC BSSID DW1 */ -// -// MAC_CSR5: BSSID register 1 -// +/* */ +/* MAC_CSR5: BSSID register 1 */ +/* */ typedef union _MAC_CSR5_STRUC { struct { - UCHAR Byte4; // BSSID byte 4 - UCHAR Byte5; // BSSID byte 5 - USHORT BssIdMask:2; // 0: one BSSID, 10: 4 BSSID, 01: 2 BSSID , 11: 8BSSID + UCHAR Byte4; /* BSSID byte 4 */ + UCHAR Byte5; /* BSSID byte 5 */ + USHORT BssIdMask:2; /* 0: one BSSID, 10: 4 BSSID, 01: 2 BSSID , 11: 8BSSID */ USHORT MBssBcnNum:3; USHORT Rsvd:11; } field; UINT32 word; } MAC_CSR5_STRUC, *PMAC_CSR5_STRUC; -#define MAX_LEN_CFG 0x1018 // rt2860b max 16k bytes. bit12:13 Maximum PSDU length (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16 -#define BBP_CSR_CFG 0x101c // -// -// BBP_CSR_CFG: BBP serial control register -// +#define MAX_LEN_CFG 0x1018 /* rt2860b max 16k bytes. bit12:13 Maximum PSDU length (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16 */ +#define BBP_CSR_CFG 0x101c /* */ +/* */ +/* BBP_CSR_CFG: BBP serial control register */ +/* */ typedef union _BBP_CSR_CFG_STRUC { struct { - UINT32 Value:8; // Register value to program into BBP - UINT32 RegNum:8; // Selected BBP register - UINT32 fRead:1; // 0: Write BBP, 1: Read BBP - UINT32 Busy:1; // 1: ASIC is busy execute BBP programming. - UINT32 BBP_PAR_DUR:1; // 0: 4 MAC clock cycles 1: 8 MAC clock cycles - UINT32 BBP_RW_MODE:1; // 0: use serial mode 1:parallel + UINT32 Value:8; /* Register value to program into BBP */ + UINT32 RegNum:8; /* Selected BBP register */ + UINT32 fRead:1; /* 0: Write BBP, 1: Read BBP */ + UINT32 Busy:1; /* 1: ASIC is busy execute BBP programming. */ + UINT32 BBP_PAR_DUR:1; /* 0: 4 MAC clock cycles 1: 8 MAC clock cycles */ + UINT32 BBP_RW_MODE:1; /* 0: use serial mode 1:parallel */ UINT32:12; } field; UINT32 word; } BBP_CSR_CFG_STRUC, *PBBP_CSR_CFG_STRUC; #define RF_CSR_CFG0 0x1020 -// -// RF_CSR_CFG: RF control register -// +/* */ +/* RF_CSR_CFG: RF control register */ +/* */ typedef union _RF_CSR_CFG0_STRUC { struct { - UINT32 RegIdAndContent:24; // Register value to program into BBP - UINT32 bitwidth:5; // Selected BBP register - UINT32 StandbyMode:1; // 0: high when stand by 1: low when standby - UINT32 Sel:1; // 0:RF_LE0 activate 1:RF_LE1 activate - UINT32 Busy:1; // 0: idle 1: 8busy + UINT32 RegIdAndContent:24; /* Register value to program into BBP */ + UINT32 bitwidth:5; /* Selected BBP register */ + UINT32 StandbyMode:1; /* 0: high when stand by 1: low when standby */ + UINT32 Sel:1; /* 0:RF_LE0 activate 1:RF_LE1 activate */ + UINT32 Busy:1; /* 0: idle 1: 8busy */ } field; UINT32 word; } RF_CSR_CFG0_STRUC, *PRF_CSR_CFG0_STRUC; #define RF_CSR_CFG1 0x1024 typedef union _RF_CSR_CFG1_STRUC { struct { - UINT32 RegIdAndContent:24; // Register value to program into BBP - UINT32 RFGap:5; // Gap between BB_CONTROL_RF and RF_LE. 0: 3 system clock cycle (37.5usec) 1: 5 system clock cycle (62.5usec) - UINT32 rsv:7; // 0: idle 1: 8busy + UINT32 RegIdAndContent:24; /* Register value to program into BBP */ + UINT32 RFGap:5; /* Gap between BB_CONTROL_RF and RF_LE. 0: 3 system clock cycle (37.5usec) 1: 5 system clock cycle (62.5usec) */ + UINT32 rsv:7; /* 0: idle 1: 8busy */ } field; UINT32 word; } RF_CSR_CFG1_STRUC, *PRF_CSR_CFG1_STRUC; -#define RF_CSR_CFG2 0x1028 // +#define RF_CSR_CFG2 0x1028 /* */ typedef union _RF_CSR_CFG2_STRUC { struct { - UINT32 RegIdAndContent:24; // Register value to program into BBP - UINT32 rsv:8; // 0: idle 1: 8busy + UINT32 RegIdAndContent:24; /* Register value to program into BBP */ + UINT32 rsv:8; /* 0: idle 1: 8busy */ } field; UINT32 word; } RF_CSR_CFG2_STRUC, *PRF_CSR_CFG2_STRUC; -#define LED_CFG 0x102c // MAC_CSR14 +#define LED_CFG 0x102c /* MAC_CSR14 */ typedef union _LED_CFG_STRUC { struct { - UINT32 OnPeriod:8; // blinking on period unit 1ms - UINT32 OffPeriod:8; // blinking off period unit 1ms - UINT32 SlowBlinkPeriod:6; // slow blinking period. unit:1ms + UINT32 OnPeriod:8; /* blinking on period unit 1ms */ + UINT32 OffPeriod:8; /* blinking off period unit 1ms */ + UINT32 SlowBlinkPeriod:6; /* slow blinking period. unit:1ms */ UINT32 rsv:2; - UINT32 RLedMode:2; // red Led Mode 0: off1: blinking upon TX2: periodic slow blinking3: always on - UINT32 GLedMode:2; // green Led Mode - UINT32 YLedMode:2; // yellow Led Mode - UINT32 LedPolar:1; // Led Polarity. 0: active low1: active high + UINT32 RLedMode:2; /* red Led Mode 0: off1: blinking upon TX2: periodic slow blinking3: always on */ + UINT32 GLedMode:2; /* green Led Mode */ + UINT32 YLedMode:2; /* yellow Led Mode */ + UINT32 LedPolar:1; /* Led Polarity. 0: active low1: active high */ UINT32:1; } field; UINT32 word; } LED_CFG_STRUC, *PLED_CFG_STRUC; -// -// 4.2 MAC TIMING configuration registers (offset:0x1100) -// -#define XIFS_TIME_CFG 0x1100 // MAC_CSR8 MAC_CSR9 +/* */ +/* 4.2 MAC TIMING configuration registers (offset:0x1100) */ +/* */ +#define XIFS_TIME_CFG 0x1100 /* MAC_CSR8 MAC_CSR9 */ typedef union _IFS_SLOT_CFG_STRUC { struct { - UINT32 CckmSifsTime:8; // unit 1us. Applied after CCK RX/TX - UINT32 OfdmSifsTime:8; // unit 1us. Applied after OFDM RX/TX - UINT32 OfdmXifsTime:4; //OFDM SIFS. unit 1us. Applied after OFDM RX when MAC doesn't reference BBP signal BBRXEND - UINT32 EIFS:9; // unit 1us - UINT32 BBRxendEnable:1; // reference RXEND signal to begin XIFS defer + UINT32 CckmSifsTime:8; /* unit 1us. Applied after CCK RX/TX */ + UINT32 OfdmSifsTime:8; /* unit 1us. Applied after OFDM RX/TX */ + UINT32 OfdmXifsTime:4; /*OFDM SIFS. unit 1us. Applied after OFDM RX when MAC doesn't reference BBP signal BBRXEND */ + UINT32 EIFS:9; /* unit 1us */ + UINT32 BBRxendEnable:1; /* reference RXEND signal to begin XIFS defer */ UINT32 rsv:2; } field; UINT32 word; } IFS_SLOT_CFG_STRUC, *PIFS_SLOT_CFG_STRUC; -#define BKOFF_SLOT_CFG 0x1104 // mac_csr9 last 8 bits -#define NAV_TIME_CFG 0x1108 // NAV (MAC_CSR15) -#define CH_TIME_CFG 0x110C // Count as channel busy -#define PBF_LIFE_TIMER 0x1110 //TX/RX MPDU timestamp timer (free run)Unit: 1us -#define BCN_TIME_CFG 0x1114 // TXRX_CSR9 +#define BKOFF_SLOT_CFG 0x1104 /* mac_csr9 last 8 bits */ +#define NAV_TIME_CFG 0x1108 /* NAV (MAC_CSR15) */ +#define CH_TIME_CFG 0x110C /* Count as channel busy */ +#define PBF_LIFE_TIMER 0x1110 /*TX/RX MPDU timestamp timer (free run)Unit: 1us */ +#define BCN_TIME_CFG 0x1114 /* TXRX_CSR9 */ #define BCN_OFFSET0 0x042C #define BCN_OFFSET1 0x0430 -// -// BCN_TIME_CFG : Synchronization control register -// +/* */ +/* BCN_TIME_CFG : Synchronization control register */ +/* */ typedef union _BCN_TIME_CFG_STRUC { struct { - UINT32 BeaconInterval:16; // in unit of 1/16 TU - UINT32 bTsfTicking:1; // Enable TSF auto counting - UINT32 TsfSyncMode:2; // Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode + UINT32 BeaconInterval:16; /* in unit of 1/16 TU */ + UINT32 bTsfTicking:1; /* Enable TSF auto counting */ + UINT32 TsfSyncMode:2; /* Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode */ UINT32 bTBTTEnable:1; - UINT32 bBeaconGen:1; // Enable beacon generator + UINT32 bBeaconGen:1; /* Enable beacon generator */ UINT32:3; UINT32 TxTimestampCompensate:8; } field; UINT32 word; } BCN_TIME_CFG_STRUC, *PBCN_TIME_CFG_STRUC; -#define TBTT_SYNC_CFG 0x1118 // txrx_csr10 -#define TSF_TIMER_DW0 0x111C // Local TSF timer lsb 32 bits. Read-only -#define TSF_TIMER_DW1 0x1120 // msb 32 bits. Read-only. -#define TBTT_TIMER 0x1124 // TImer remains till next TBTT. Read-only. TXRX_CSR14 -#define INT_TIMER_CFG 0x1128 // -#define INT_TIMER_EN 0x112c // GP-timer and pre-tbtt Int enable -#define CH_IDLE_STA 0x1130 // channel idle time -#define CH_BUSY_STA 0x1134 // channle busy time -// -// 4.2 MAC POWER configuration registers (offset:0x1200) -// -#define MAC_STATUS_CFG 0x1200 // old MAC_CSR12 -#define PWR_PIN_CFG 0x1204 // old MAC_CSR12 -#define AUTO_WAKEUP_CFG 0x1208 // old MAC_CSR10 -// -// AUTO_WAKEUP_CFG: Manual power control / status register -// +#define TBTT_SYNC_CFG 0x1118 /* txrx_csr10 */ +#define TSF_TIMER_DW0 0x111C /* Local TSF timer lsb 32 bits. Read-only */ +#define TSF_TIMER_DW1 0x1120 /* msb 32 bits. Read-only. */ +#define TBTT_TIMER 0x1124 /* TImer remains till next TBTT. Read-only. TXRX_CSR14 */ +#define INT_TIMER_CFG 0x1128 /* */ +#define INT_TIMER_EN 0x112c /* GP-timer and pre-tbtt Int enable */ +#define CH_IDLE_STA 0x1130 /* channel idle time */ +#define CH_BUSY_STA 0x1134 /* channle busy time */ +/* */ +/* 4.2 MAC POWER configuration registers (offset:0x1200) */ +/* */ +#define MAC_STATUS_CFG 0x1200 /* old MAC_CSR12 */ +#define PWR_PIN_CFG 0x1204 /* old MAC_CSR12 */ +#define AUTO_WAKEUP_CFG 0x1208 /* old MAC_CSR10 */ +/* */ +/* AUTO_WAKEUP_CFG: Manual power control / status register */ +/* */ typedef union _AUTO_WAKEUP_STRUC { struct { UINT32 AutoLeadTime:8; - UINT32 NumofSleepingTbtt:7; // ForceWake has high privilege than PutToSleep when both set - UINT32 EnableAutoWakeup:1; // 0:sleep, 1:awake + UINT32 NumofSleepingTbtt:7; /* ForceWake has high privilege than PutToSleep when both set */ + UINT32 EnableAutoWakeup:1; /* 0:sleep, 1:awake */ UINT32:16; } field; UINT32 word; } AUTO_WAKEUP_STRUC, *PAUTO_WAKEUP_STRUC; -// -// 4.3 MAC TX configuration registers (offset:0x1300) -// +/* */ +/* 4.3 MAC TX configuration registers (offset:0x1300) */ +/* */ -#define EDCA_AC0_CFG 0x1300 //AC_TXOP_CSR0 0x3474 +#define EDCA_AC0_CFG 0x1300 /*AC_TXOP_CSR0 0x3474 */ #define EDCA_AC1_CFG 0x1304 #define EDCA_AC2_CFG 0x1308 #define EDCA_AC3_CFG 0x130c typedef union _EDCA_AC_CFG_STRUC { struct { - UINT32 AcTxop:8; // in unit of 32us - UINT32 Aifsn:4; // # of slot time - UINT32 Cwmin:4; // - UINT32 Cwmax:4; //unit power of 2 - UINT32:12; // + UINT32 AcTxop:8; /* in unit of 32us */ + UINT32 Aifsn:4; /* # of slot time */ + UINT32 Cwmin:4; /* */ + UINT32 Cwmax:4; /*unit power of 2 */ + UINT32:12; /* */ } field; UINT32 word; } EDCA_AC_CFG_STRUC, *PEDCA_AC_CFG_STRUC; @@ -590,7 +590,7 @@ typedef union _EDCA_AC_CFG_STRUC { #define TX_PWR_CFG_3 0x1320 #define TX_PWR_CFG_4 0x1324 #define TX_PIN_CFG 0x1328 -#define TX_BAND_CFG 0x132c // 0x1 use upper 20MHz. 0 juse lower 20MHz +#define TX_BAND_CFG 0x132c /* 0x1 use upper 20MHz. 0 juse lower 20MHz */ #define TX_SW_CFG0 0x1330 #define TX_SW_CFG1 0x1334 #define TX_SW_CFG2 0x1338 @@ -601,9 +601,9 @@ typedef union _EDCA_AC_CFG_STRUC { typedef union _TX_RTS_CFG_STRUC { struct { UINT32 AutoRtsRetryLimit:8; - UINT32 RtsThres:16; // unit:byte - UINT32 RtsFbkEn:1; // enable rts rate fallback - UINT32 rsv:7; // 1: HT non-STBC control frame enable + UINT32 RtsThres:16; /* unit:byte */ + UINT32 RtsFbkEn:1; /* enable rts rate fallback */ + UINT32 rsv:7; /* 1: HT non-STBC control frame enable */ } field; UINT32 word; } TX_RTS_CFG_STRUC, *PTX_RTS_CFG_STRUC; @@ -611,38 +611,38 @@ typedef union _TX_RTS_CFG_STRUC { typedef union _TX_TIMEOUT_CFG_STRUC { struct { UINT32 rsv:4; - UINT32 MpduLifeTime:4; // expiration time = 2^(9+MPDU LIFE TIME) us - UINT32 RxAckTimeout:8; // unit:slot. Used for TX precedure - UINT32 TxopTimeout:8; //TXOP timeout value for TXOP truncation. It is recommended that (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT) - UINT32 rsv2:8; // 1: HT non-STBC control frame enable + UINT32 MpduLifeTime:4; /* expiration time = 2^(9+MPDU LIFE TIME) us */ + UINT32 RxAckTimeout:8; /* unit:slot. Used for TX precedure */ + UINT32 TxopTimeout:8; /*TXOP timeout value for TXOP truncation. It is recommended that (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT) */ + UINT32 rsv2:8; /* 1: HT non-STBC control frame enable */ } field; UINT32 word; } TX_TIMEOUT_CFG_STRUC, *PTX_TIMEOUT_CFG_STRUC; #define TX_RTY_CFG 0x134c typedef union PACKED _TX_RTY_CFG_STRUC { struct { - UINT32 ShortRtyLimit:8; // short retry limit - UINT32 LongRtyLimit:8; //long retry limit - UINT32 LongRtyThre:12; // Long retry threshoold - UINT32 NonAggRtyMode:1; // Non-Aggregate MPDU retry mode. 0:expired by retry limit, 1: expired by mpdu life timer - UINT32 AggRtyMode:1; // Aggregate MPDU retry mode. 0:expired by retry limit, 1: expired by mpdu life timer - UINT32 TxautoFBEnable:1; // Tx retry PHY rate auto fallback enable - UINT32 rsv:1; // 1: HT non-STBC control frame enable + UINT32 ShortRtyLimit:8; /* short retry limit */ + UINT32 LongRtyLimit:8; /*long retry limit */ + UINT32 LongRtyThre:12; /* Long retry threshoold */ + UINT32 NonAggRtyMode:1; /* Non-Aggregate MPDU retry mode. 0:expired by retry limit, 1: expired by mpdu life timer */ + UINT32 AggRtyMode:1; /* Aggregate MPDU retry mode. 0:expired by retry limit, 1: expired by mpdu life timer */ + UINT32 TxautoFBEnable:1; /* Tx retry PHY rate auto fallback enable */ + UINT32 rsv:1; /* 1: HT non-STBC control frame enable */ } field; UINT32 word; } TX_RTY_CFG_STRUC, *PTX_RTY_CFG_STRUC; #define TX_LINK_CFG 0x1350 typedef union PACKED _TX_LINK_CFG_STRUC { struct PACKED { - UINT32 RemoteMFBLifeTime:8; //remote MFB life time. unit : 32us - UINT32 MFBEnable:1; // TX apply remote MFB 1:enable - UINT32 RemoteUMFSEnable:1; // remote unsolicit MFB enable. 0: not apply remote remote unsolicit (MFS=7) - UINT32 TxMRQEn:1; // MCS request TX enable - UINT32 TxRDGEn:1; // RDG TX enable - UINT32 TxCFAckEn:1; // Piggyback CF-ACK enable - UINT32 rsv:3; // - UINT32 RemotMFB:8; // remote MCS feedback - UINT32 RemotMFS:8; //remote MCS feedback sequence number + UINT32 RemoteMFBLifeTime:8; /*remote MFB life time. unit : 32us */ + UINT32 MFBEnable:1; /* TX apply remote MFB 1:enable */ + UINT32 RemoteUMFSEnable:1; /* remote unsolicit MFB enable. 0: not apply remote remote unsolicit (MFS=7) */ + UINT32 TxMRQEn:1; /* MCS request TX enable */ + UINT32 TxRDGEn:1; /* RDG TX enable */ + UINT32 TxCFAckEn:1; /* Piggyback CF-ACK enable */ + UINT32 rsv:3; /* */ + UINT32 RemotMFB:8; /* remote MCS feedback */ + UINT32 RemotMFS:8; /*remote MCS feedback sequence number */ } field; UINT32 word; } TX_LINK_CFG_STRUC, *PTX_LINK_CFG_STRUC; @@ -677,116 +677,116 @@ typedef union _HT_FBK_CFG1_STRUC { #define LG_FBK_CFG0 0x135c typedef union _LG_FBK_CFG0_STRUC { struct { - UINT32 OFDMMCS0FBK:4; //initial value is 0 - UINT32 OFDMMCS1FBK:4; //initial value is 0 - UINT32 OFDMMCS2FBK:4; //initial value is 1 - UINT32 OFDMMCS3FBK:4; //initial value is 2 - UINT32 OFDMMCS4FBK:4; //initial value is 3 - UINT32 OFDMMCS5FBK:4; //initial value is 4 - UINT32 OFDMMCS6FBK:4; //initial value is 5 - UINT32 OFDMMCS7FBK:4; //initial value is 6 + UINT32 OFDMMCS0FBK:4; /*initial value is 0 */ + UINT32 OFDMMCS1FBK:4; /*initial value is 0 */ + UINT32 OFDMMCS2FBK:4; /*initial value is 1 */ + UINT32 OFDMMCS3FBK:4; /*initial value is 2 */ + UINT32 OFDMMCS4FBK:4; /*initial value is 3 */ + UINT32 OFDMMCS5FBK:4; /*initial value is 4 */ + UINT32 OFDMMCS6FBK:4; /*initial value is 5 */ + UINT32 OFDMMCS7FBK:4; /*initial value is 6 */ } field; UINT32 word; } LG_FBK_CFG0_STRUC, *PLG_FBK_CFG0_STRUC; #define LG_FBK_CFG1 0x1360 typedef union _LG_FBK_CFG1_STRUC { struct { - UINT32 CCKMCS0FBK:4; //initial value is 0 - UINT32 CCKMCS1FBK:4; //initial value is 0 - UINT32 CCKMCS2FBK:4; //initial value is 1 - UINT32 CCKMCS3FBK:4; //initial value is 2 + UINT32 CCKMCS0FBK:4; /*initial value is 0 */ + UINT32 CCKMCS1FBK:4; /*initial value is 0 */ + UINT32 CCKMCS2FBK:4; /*initial value is 1 */ + UINT32 CCKMCS3FBK:4; /*initial value is 2 */ UINT32 rsv:16; } field; UINT32 word; } LG_FBK_CFG1_STRUC, *PLG_FBK_CFG1_STRUC; -//======================================================= -//================ Protection Paramater================================ -//======================================================= -#define CCK_PROT_CFG 0x1364 //CCK Protection +/*======================================================= */ +/*================ Protection Paramater================================ */ +/*======================================================= */ +#define CCK_PROT_CFG 0x1364 /*CCK Protection */ #define ASIC_SHORTNAV 1 #define ASIC_LONGNAV 2 #define ASIC_RTS 1 #define ASIC_CTS 2 typedef union _PROT_CFG_STRUC { struct { - UINT32 ProtectRate:16; //Protection control frame rate for CCK TX(RTS/CTS/CFEnd). - UINT32 ProtectCtrl:2; //Protection control frame type for CCK TX. 1:RTS/CTS, 2:CTS-to-self, 0:None, 3:rsv - UINT32 ProtectNav:2; //TXOP protection type for CCK TX. 0:None, 1:ShortNAVprotect, 2:LongNAVProtect, 3:rsv - UINT32 TxopAllowCck:1; //CCK TXOP allowance.0:disallow. - UINT32 TxopAllowOfdm:1; //CCK TXOP allowance.0:disallow. - UINT32 TxopAllowMM20:1; //CCK TXOP allowance. 0:disallow. - UINT32 TxopAllowMM40:1; //CCK TXOP allowance.0:disallow. - UINT32 TxopAllowGF20:1; //CCK TXOP allowance.0:disallow. - UINT32 TxopAllowGF40:1; //CCK TXOP allowance.0:disallow. - UINT32 RTSThEn:1; //RTS threshold enable on CCK TX + UINT32 ProtectRate:16; /*Protection control frame rate for CCK TX(RTS/CTS/CFEnd). */ + UINT32 ProtectCtrl:2; /*Protection control frame type for CCK TX. 1:RTS/CTS, 2:CTS-to-self, 0:None, 3:rsv */ + UINT32 ProtectNav:2; /*TXOP protection type for CCK TX. 0:None, 1:ShortNAVprotect, 2:LongNAVProtect, 3:rsv */ + UINT32 TxopAllowCck:1; /*CCK TXOP allowance.0:disallow. */ + UINT32 TxopAllowOfdm:1; /*CCK TXOP allowance.0:disallow. */ + UINT32 TxopAllowMM20:1; /*CCK TXOP allowance. 0:disallow. */ + UINT32 TxopAllowMM40:1; /*CCK TXOP allowance.0:disallow. */ + UINT32 TxopAllowGF20:1; /*CCK TXOP allowance.0:disallow. */ + UINT32 TxopAllowGF40:1; /*CCK TXOP allowance.0:disallow. */ + UINT32 RTSThEn:1; /*RTS threshold enable on CCK TX */ UINT32 rsv:5; } field; UINT32 word; } PROT_CFG_STRUC, *PPROT_CFG_STRUC; -#define OFDM_PROT_CFG 0x1368 //OFDM Protection -#define MM20_PROT_CFG 0x136C //MM20 Protection -#define MM40_PROT_CFG 0x1370 //MM40 Protection -#define GF20_PROT_CFG 0x1374 //GF20 Protection -#define GF40_PROT_CFG 0x1378 //GR40 Protection -#define EXP_CTS_TIME 0x137C // -#define EXP_ACK_TIME 0x1380 // - -// -// 4.4 MAC RX configuration registers (offset:0x1400) -// -#define RX_FILTR_CFG 0x1400 //TXRX_CSR0 -#define AUTO_RSP_CFG 0x1404 //TXRX_CSR4 -// -// TXRX_CSR4: Auto-Responder/ -// +#define OFDM_PROT_CFG 0x1368 /*OFDM Protection */ +#define MM20_PROT_CFG 0x136C /*MM20 Protection */ +#define MM40_PROT_CFG 0x1370 /*MM40 Protection */ +#define GF20_PROT_CFG 0x1374 /*GF20 Protection */ +#define GF40_PROT_CFG 0x1378 /*GR40 Protection */ +#define EXP_CTS_TIME 0x137C /* */ +#define EXP_ACK_TIME 0x1380 /* */ + +/* */ +/* 4.4 MAC RX configuration registers (offset:0x1400) */ +/* */ +#define RX_FILTR_CFG 0x1400 /*TXRX_CSR0 */ +#define AUTO_RSP_CFG 0x1404 /*TXRX_CSR4 */ +/* */ +/* TXRX_CSR4: Auto-Responder/ */ +/* */ typedef union _AUTO_RSP_CFG_STRUC { struct { UINT32 AutoResponderEnable:1; - UINT32 BACAckPolicyEnable:1; // 0:long, 1:short preamble - UINT32 CTS40MMode:1; // Response CTS 40MHz duplicate mode - UINT32 CTS40MRef:1; // Response CTS 40MHz duplicate mode - UINT32 AutoResponderPreamble:1; // 0:long, 1:short preamble - UINT32 rsv:1; // Power bit value in conrtrol frame - UINT32 DualCTSEn:1; // Power bit value in conrtrol frame - UINT32 AckCtsPsmBit:1; // Power bit value in conrtrol frame + UINT32 BACAckPolicyEnable:1; /* 0:long, 1:short preamble */ + UINT32 CTS40MMode:1; /* Response CTS 40MHz duplicate mode */ + UINT32 CTS40MRef:1; /* Response CTS 40MHz duplicate mode */ + UINT32 AutoResponderPreamble:1; /* 0:long, 1:short preamble */ + UINT32 rsv:1; /* Power bit value in conrtrol frame */ + UINT32 DualCTSEn:1; /* Power bit value in conrtrol frame */ + UINT32 AckCtsPsmBit:1; /* Power bit value in conrtrol frame */ UINT32:24; } field; UINT32 word; } AUTO_RSP_CFG_STRUC, *PAUTO_RSP_CFG_STRUC; -#define LEGACY_BASIC_RATE 0x1408 // TXRX_CSR5 0x3054 +#define LEGACY_BASIC_RATE 0x1408 /* TXRX_CSR5 0x3054 */ #define HT_BASIC_RATE 0x140c #define HT_CTRL_CFG 0x1410 #define SIFS_COST_CFG 0x1414 -#define RX_PARSER_CFG 0x1418 //Set NAV for all received frames +#define RX_PARSER_CFG 0x1418 /*Set NAV for all received frames */ -// -// 4.5 MAC Security configuration (offset:0x1500) -// -#define TX_SEC_CNT0 0x1500 // -#define RX_SEC_CNT0 0x1504 // -#define CCMP_FC_MUTE 0x1508 // -// -// 4.6 HCCA/PSMP (offset:0x1600) -// +/* */ +/* 4.5 MAC Security configuration (offset:0x1500) */ +/* */ +#define TX_SEC_CNT0 0x1500 /* */ +#define RX_SEC_CNT0 0x1504 /* */ +#define CCMP_FC_MUTE 0x1508 /* */ +/* */ +/* 4.6 HCCA/PSMP (offset:0x1600) */ +/* */ #define TXOP_HLDR_ADDR0 0x1600 #define TXOP_HLDR_ADDR1 0x1604 #define TXOP_HLDR_ET 0x1608 #define QOS_CFPOLL_RA_DW0 0x160c #define QOS_CFPOLL_A1_DW1 0x1610 #define QOS_CFPOLL_QC 0x1614 -// -// 4.7 MAC Statistis registers (offset:0x1700) -// -#define RX_STA_CNT0 0x1700 // -#define RX_STA_CNT1 0x1704 // -#define RX_STA_CNT2 0x1708 // - -// -// RX_STA_CNT0_STRUC: RX PLCP error count & RX CRC error count -// +/* */ +/* 4.7 MAC Statistis registers (offset:0x1700) */ +/* */ +#define RX_STA_CNT0 0x1700 /* */ +#define RX_STA_CNT1 0x1704 /* */ +#define RX_STA_CNT2 0x1708 /* */ + +/* */ +/* RX_STA_CNT0_STRUC: RX PLCP error count & RX CRC error count */ +/* */ typedef union _RX_STA_CNT0_STRUC { struct { USHORT CrcErr; @@ -795,9 +795,9 @@ typedef union _RX_STA_CNT0_STRUC { UINT32 word; } RX_STA_CNT0_STRUC, *PRX_STA_CNT0_STRUC; -// -// RX_STA_CNT1_STRUC: RX False CCA count & RX LONG frame count -// +/* */ +/* RX_STA_CNT1_STRUC: RX False CCA count & RX LONG frame count */ +/* */ typedef union _RX_STA_CNT1_STRUC { struct { USHORT FalseCca; @@ -806,9 +806,9 @@ typedef union _RX_STA_CNT1_STRUC { UINT32 word; } RX_STA_CNT1_STRUC, *PRX_STA_CNT1_STRUC; -// -// RX_STA_CNT2_STRUC: -// +/* */ +/* RX_STA_CNT2_STRUC: */ +/* */ typedef union _RX_STA_CNT2_STRUC { struct { USHORT RxDupliCount; @@ -816,10 +816,10 @@ typedef union _RX_STA_CNT2_STRUC { } field; UINT32 word; } RX_STA_CNT2_STRUC, *PRX_STA_CNT2_STRUC; -#define TX_STA_CNT0 0x170C // -// -// STA_CSR3: TX Beacon count -// +#define TX_STA_CNT0 0x170C /* */ +/* */ +/* STA_CSR3: TX Beacon count */ +/* */ typedef union _TX_STA_CNT0_STRUC { struct { USHORT TxFailCount; @@ -827,10 +827,10 @@ typedef union _TX_STA_CNT0_STRUC { } field; UINT32 word; } TX_STA_CNT0_STRUC, *PTX_STA_CNT0_STRUC; -#define TX_STA_CNT1 0x1710 // -// -// TX_STA_CNT1: TX tx count -// +#define TX_STA_CNT1 0x1710 /* */ +/* */ +/* TX_STA_CNT1: TX tx count */ +/* */ typedef union _TX_STA_CNT1_STRUC { struct { USHORT TxSuccess; @@ -838,10 +838,10 @@ typedef union _TX_STA_CNT1_STRUC { } field; UINT32 word; } TX_STA_CNT1_STRUC, *PTX_STA_CNT1_STRUC; -#define TX_STA_CNT2 0x1714 // -// -// TX_STA_CNT2: TX tx count -// +#define TX_STA_CNT2 0x1714 /* */ +/* */ +/* TX_STA_CNT2: TX tx count */ +/* */ typedef union _TX_STA_CNT2_STRUC { struct { USHORT TxZeroLenCount; @@ -849,26 +849,26 @@ typedef union _TX_STA_CNT2_STRUC { } field; UINT32 word; } TX_STA_CNT2_STRUC, *PTX_STA_CNT2_STRUC; -#define TX_STA_FIFO 0x1718 // -// -// TX_STA_FIFO_STRUC: TX Result for specific PID status fifo register -// +#define TX_STA_FIFO 0x1718 /* */ +/* */ +/* TX_STA_FIFO_STRUC: TX Result for specific PID status fifo register */ +/* */ typedef union PACKED _TX_STA_FIFO_STRUC { struct { - UINT32 bValid:1; // 1:This register contains a valid TX result + UINT32 bValid:1; /* 1:This register contains a valid TX result */ UINT32 PidType:4; - UINT32 TxSuccess:1; // Tx No retry success - UINT32 TxAggre:1; // Tx Retry Success - UINT32 TxAckRequired:1; // Tx fail - UINT32 wcid:8; //wireless client index -// UINT32 SuccessRate:16; //include MCS, mode ,shortGI, BW settingSame format as TXWI Word 0 Bit 31-16. - UINT32 SuccessRate:13; //include MCS, mode ,shortGI, BW settingSame format as TXWI Word 0 Bit 31-16. + UINT32 TxSuccess:1; /* Tx No retry success */ + UINT32 TxAggre:1; /* Tx Retry Success */ + UINT32 TxAckRequired:1; /* Tx fail */ + UINT32 wcid:8; /*wireless client index */ +/* UINT32 SuccessRate:16; //include MCS, mode ,shortGI, BW settingSame format as TXWI Word 0 Bit 31-16. */ + UINT32 SuccessRate:13; /*include MCS, mode ,shortGI, BW settingSame format as TXWI Word 0 Bit 31-16. */ UINT32 TxBF:1; UINT32 Reserve:2; } field; UINT32 word; } TX_STA_FIFO_STRUC, *PTX_STA_FIFO_STRUC; -// Debug counter +/* Debug counter */ #define TX_AGG_CNT 0x171c typedef union _TX_AGG_CNT_STRUC { struct { @@ -877,7 +877,7 @@ typedef union _TX_AGG_CNT_STRUC { } field; UINT32 word; } TX_AGG_CNT_STRUC, *PTX_AGG_CNT_STRUC; -// Debug counter +/* Debug counter */ #define TX_AGG_CNT0 0x1720 typedef union _TX_AGG_CNT0_STRUC { struct { @@ -886,7 +886,7 @@ typedef union _TX_AGG_CNT0_STRUC { } field; UINT32 word; } TX_AGG_CNT0_STRUC, *PTX_AGG_CNT0_STRUC; -// Debug counter +/* Debug counter */ #define TX_AGG_CNT1 0x1724 typedef union _TX_AGG_CNT1_STRUC { struct { @@ -903,7 +903,7 @@ typedef union _TX_AGG_CNT2_STRUC { } field; UINT32 word; } TX_AGG_CNT2_STRUC, *PTX_AGG_CNT2_STRUC; -// Debug counter +/* Debug counter */ #define TX_AGG_CNT3 0x172c typedef union _TX_AGG_CNT3_STRUC { struct { @@ -912,7 +912,7 @@ typedef union _TX_AGG_CNT3_STRUC { } field; UINT32 word; } TX_AGG_CNT3_STRUC, *PTX_AGG_CNT3_STRUC; -// Debug counter +/* Debug counter */ #define TX_AGG_CNT4 0x1730 typedef union _TX_AGG_CNT4_STRUC { struct { @@ -948,32 +948,32 @@ typedef union _TX_AGG_CNT7_STRUC { #define MPDU_DENSITY_CNT 0x1740 typedef union _MPDU_DEN_CNT_STRUC { struct { - USHORT TXZeroDelCount; //TX zero length delimiter count - USHORT RXZeroDelCount; //RX zero length delimiter count + USHORT TXZeroDelCount; /*TX zero length delimiter count */ + USHORT RXZeroDelCount; /*RX zero length delimiter count */ } field; UINT32 word; } MPDU_DEN_CNT_STRUC, *PMPDU_DEN_CNT_STRUC; -// -// TXRX control registers - base address 0x3000 -// -// rt2860b UNKNOWN reg use R/O Reg Addr 0x77d0 first.. +/* */ +/* TXRX control registers - base address 0x3000 */ +/* */ +/* rt2860b UNKNOWN reg use R/O Reg Addr 0x77d0 first.. */ #define TXRX_CSR1 0x77d0 -// -// Security key table memory, base address = 0x1000 -// -#define MAC_WCID_BASE 0x1800 //8-bytes(use only 6-bytes) * 256 entry = +/* */ +/* Security key table memory, base address = 0x1000 */ +/* */ +#define MAC_WCID_BASE 0x1800 /*8-bytes(use only 6-bytes) * 256 entry = */ #define HW_WCID_ENTRY_SIZE 8 -#define PAIRWISE_KEY_TABLE_BASE 0x4000 // 32-byte * 256-entry = -byte +#define PAIRWISE_KEY_TABLE_BASE 0x4000 /* 32-byte * 256-entry = -byte */ #define HW_KEY_ENTRY_SIZE 0x20 -#define PAIRWISE_IVEIV_TABLE_BASE 0x6000 // 8-byte * 256-entry = -byte -#define MAC_IVEIV_TABLE_BASE 0x6000 // 8-byte * 256-entry = -byte +#define PAIRWISE_IVEIV_TABLE_BASE 0x6000 /* 8-byte * 256-entry = -byte */ +#define MAC_IVEIV_TABLE_BASE 0x6000 /* 8-byte * 256-entry = -byte */ #define HW_IVEIV_ENTRY_SIZE 8 -#define MAC_WCID_ATTRIBUTE_BASE 0x6800 // 4-byte * 256-entry = -byte +#define MAC_WCID_ATTRIBUTE_BASE 0x6800 /* 4-byte * 256-entry = -byte */ #define HW_WCID_ATTRI_SIZE 4 #define WCID_RESERVED 0x6bfc -#define SHARED_KEY_TABLE_BASE 0x6c00 // 32-byte * 16-entry = 512-byte -#define SHARED_KEY_MODE_BASE 0x7000 // 32-byte * 16-entry = 512-byte +#define SHARED_KEY_TABLE_BASE 0x6c00 /* 32-byte * 16-entry = 512-byte */ +#define SHARED_KEY_MODE_BASE 0x7000 /* 32-byte * 16-entry = 512-byte */ #define HW_SHARED_KEY_MODE_SIZE 4 #define SHAREDKEYTABLE 0 #define PAIRWISEKEYTABLE 1 @@ -999,48 +999,48 @@ typedef union _SHAREDKEY_MODE_STRUC { } field; UINT32 word; } SHAREDKEY_MODE_STRUC, *PSHAREDKEY_MODE_STRUC; -// 64-entry for pairwise key table -typedef struct _HW_WCID_ENTRY { // 8-byte per entry +/* 64-entry for pairwise key table */ +typedef struct _HW_WCID_ENTRY { /* 8-byte per entry */ UCHAR Address[6]; UCHAR Rsv[2]; } HW_WCID_ENTRY, PHW_WCID_ENTRY; -// ================================================================================= -// WCID format -// ================================================================================= -//7.1 WCID ENTRY format : 8bytes +/* ================================================================================= */ +/* WCID format */ +/* ================================================================================= */ +/*7.1 WCID ENTRY format : 8bytes */ typedef struct _WCID_ENTRY_STRUC { - UCHAR RXBABitmap7; // bit0 for TID8, bit7 for TID 15 - UCHAR RXBABitmap0; // bit0 for TID0, bit7 for TID 7 - UCHAR MAC[6]; // 0 for shared key table. 1 for pairwise key table + UCHAR RXBABitmap7; /* bit0 for TID8, bit7 for TID 15 */ + UCHAR RXBABitmap0; /* bit0 for TID0, bit7 for TID 7 */ + UCHAR MAC[6]; /* 0 for shared key table. 1 for pairwise key table */ } WCID_ENTRY_STRUC, *PWCID_ENTRY_STRUC; -//8.1.1 SECURITY KEY format : 8DW -// 32-byte per entry, total 16-entry for shared key table, 64-entry for pairwise key table -typedef struct _HW_KEY_ENTRY { // 32-byte per entry +/*8.1.1 SECURITY KEY format : 8DW */ +/* 32-byte per entry, total 16-entry for shared key table, 64-entry for pairwise key table */ +typedef struct _HW_KEY_ENTRY { /* 32-byte per entry */ UCHAR Key[16]; UCHAR TxMic[8]; UCHAR RxMic[8]; } HW_KEY_ENTRY, *PHW_KEY_ENTRY; -//8.1.2 IV/EIV format : 2DW +/*8.1.2 IV/EIV format : 2DW */ -//8.1.3 RX attribute entry format : 1DW +/*8.1.3 RX attribute entry format : 1DW */ typedef struct _MAC_ATTRIBUTE_STRUC { - UINT32 KeyTab:1; // 0 for shared key table. 1 for pairwise key table + UINT32 KeyTab:1; /* 0 for shared key table. 1 for pairwise key table */ UINT32 PairKeyMode:3; - UINT32 BSSIDIdx:3; //multipleBSS index for the WCID + UINT32 BSSIDIdx:3; /*multipleBSS index for the WCID */ UINT32 RXWIUDF:3; UINT32 rsv:22; } MAC_ATTRIBUTE_STRUC, *PMAC_ATTRIBUTE_STRUC; -// ================================================================================= -// HOST-MCU communication data structure -// ================================================================================= - -// -// H2M_MAILBOX_CSR: Host-to-MCU Mailbox -// +/* ================================================================================= */ +/* HOST-MCU communication data structure */ +/* ================================================================================= */ + +/* */ +/* H2M_MAILBOX_CSR: Host-to-MCU Mailbox */ +/* */ typedef union _H2M_MAILBOX_STRUC { struct { UINT32 LowByte:8; @@ -1051,9 +1051,9 @@ typedef union _H2M_MAILBOX_STRUC { UINT32 word; } H2M_MAILBOX_STRUC, *PH2M_MAILBOX_STRUC; -// -// M2H_CMD_DONE_CSR: MCU-to-Host command complete indication -// +/* */ +/* M2H_CMD_DONE_CSR: MCU-to-Host command complete indication */ +/* */ typedef union _M2H_CMD_DONE_STRUC { struct { UINT32 CmdToken0; @@ -1064,42 +1064,42 @@ typedef union _M2H_CMD_DONE_STRUC { UINT32 word; } M2H_CMD_DONE_STRUC, *PM2H_CMD_DONE_STRUC; -//NAV_TIME_CFG :NAV +/*NAV_TIME_CFG :NAV */ typedef union _NAV_TIME_CFG_STRUC { struct { - UCHAR Sifs; // in unit of 1-us - UCHAR SlotTime; // in unit of 1-us - USHORT Eifs:9; // in unit of 1-us - USHORT ZeroSifs:1; // Applied zero SIFS timer after OFDM RX 0: disable + UCHAR Sifs; /* in unit of 1-us */ + UCHAR SlotTime; /* in unit of 1-us */ + USHORT Eifs:9; /* in unit of 1-us */ + USHORT ZeroSifs:1; /* Applied zero SIFS timer after OFDM RX 0: disable */ USHORT rsv:6; } field; UINT32 word; } NAV_TIME_CFG_STRUC, *PNAV_TIME_CFG_STRUC; -// -// RX_FILTR_CFG: /RX configuration register -// +/* */ +/* RX_FILTR_CFG: /RX configuration register */ +/* */ typedef union _RX_FILTR_CFG_STRUC { struct { - UINT32 DropCRCErr:1; // Drop CRC error - UINT32 DropPhyErr:1; // Drop physical error - UINT32 DropNotToMe:1; // Drop not to me unicast frame - UINT32 DropNotMyBSSID:1; // Drop fram ToDs bit is true - - UINT32 DropVerErr:1; // Drop version error frame - UINT32 DropMcast:1; // Drop multicast frames - UINT32 DropBcast:1; // Drop broadcast frames - UINT32 DropDuplicate:1; // Drop duplicate frame - - UINT32 DropCFEndAck:1; // Drop Ps-Poll - UINT32 DropCFEnd:1; // Drop Ps-Poll - UINT32 DropAck:1; // Drop Ps-Poll - UINT32 DropCts:1; // Drop Ps-Poll - - UINT32 DropRts:1; // Drop Ps-Poll - UINT32 DropPsPoll:1; // Drop Ps-Poll - UINT32 DropBA:1; // - UINT32 DropBAR:1; // + UINT32 DropCRCErr:1; /* Drop CRC error */ + UINT32 DropPhyErr:1; /* Drop physical error */ + UINT32 DropNotToMe:1; /* Drop not to me unicast frame */ + UINT32 DropNotMyBSSID:1; /* Drop fram ToDs bit is true */ + + UINT32 DropVerErr:1; /* Drop version error frame */ + UINT32 DropMcast:1; /* Drop multicast frames */ + UINT32 DropBcast:1; /* Drop broadcast frames */ + UINT32 DropDuplicate:1; /* Drop duplicate frame */ + + UINT32 DropCFEndAck:1; /* Drop Ps-Poll */ + UINT32 DropCFEnd:1; /* Drop Ps-Poll */ + UINT32 DropAck:1; /* Drop Ps-Poll */ + UINT32 DropCts:1; /* Drop Ps-Poll */ + + UINT32 DropRts:1; /* Drop Ps-Poll */ + UINT32 DropPsPoll:1; /* Drop Ps-Poll */ + UINT32 DropBA:1; /* */ + UINT32 DropBAR:1; /* */ UINT32 DropRsvCntlType:1; UINT32:15; @@ -1107,23 +1107,23 @@ typedef union _RX_FILTR_CFG_STRUC { UINT32 word; } RX_FILTR_CFG_STRUC, *PRX_FILTR_CFG_STRUC; -// -// PHY_CSR4: RF serial control register -// +/* */ +/* PHY_CSR4: RF serial control register */ +/* */ typedef union _PHY_CSR4_STRUC { struct { - UINT32 RFRegValue:24; // Register value (include register id) serial out to RF/IF chip. - UINT32 NumberOfBits:5; // Number of bits used in RFRegValue (I:20, RFMD:22) - UINT32 IFSelect:1; // 1: select IF to program, 0: select RF to program - UINT32 PLL_LD:1; // RF PLL_LD status - UINT32 Busy:1; // 1: ASIC is busy execute RF programming. + UINT32 RFRegValue:24; /* Register value (include register id) serial out to RF/IF chip. */ + UINT32 NumberOfBits:5; /* Number of bits used in RFRegValue (I:20, RFMD:22) */ + UINT32 IFSelect:1; /* 1: select IF to program, 0: select RF to program */ + UINT32 PLL_LD:1; /* RF PLL_LD status */ + UINT32 Busy:1; /* 1: ASIC is busy execute RF programming. */ } field; UINT32 word; } PHY_CSR4_STRUC, *PPHY_CSR4_STRUC; -// -// SEC_CSR5: shared key table security mode register -// +/* */ +/* SEC_CSR5: shared key table security mode register */ +/* */ typedef union _SEC_CSR5_STRUC { struct { UINT32 Bss2Key0CipherAlg:3; @@ -1146,9 +1146,9 @@ typedef union _SEC_CSR5_STRUC { UINT32 word; } SEC_CSR5_STRUC, *PSEC_CSR5_STRUC; -// -// HOST_CMD_CSR: For HOST to interrupt embedded processor -// +/* */ +/* HOST_CMD_CSR: For HOST to interrupt embedded processor */ +/* */ typedef union _HOST_CMD_CSR_STRUC { struct { UINT32 HostCommand:8; @@ -1157,47 +1157,47 @@ typedef union _HOST_CMD_CSR_STRUC { UINT32 word; } HOST_CMD_CSR_STRUC, *PHOST_CMD_CSR_STRUC; -// -// AIFSN_CSR: AIFSN for each EDCA AC -// - -// -// E2PROM_CSR: EEPROM control register -// +/* */ +/* AIFSN_CSR: AIFSN for each EDCA AC */ +/* */ + +/* */ +/* E2PROM_CSR: EEPROM control register */ +/* */ typedef union _E2PROM_CSR_STRUC { struct { - UINT32 Reload:1; // Reload EEPROM content, write one to reload, self-cleared. + UINT32 Reload:1; /* Reload EEPROM content, write one to reload, self-cleared. */ UINT32 EepromSK:1; UINT32 EepromCS:1; UINT32 EepromDI:1; UINT32 EepromDO:1; - UINT32 Type:1; // 1: 93C46, 0:93C66 - UINT32 LoadStatus:1; // 1:loading, 0:done + UINT32 Type:1; /* 1: 93C46, 0:93C66 */ + UINT32 LoadStatus:1; /* 1:loading, 0:done */ UINT32 Rsvd:25; } field; UINT32 word; } E2PROM_CSR_STRUC, *PE2PROM_CSR_STRUC; -// -// QOS_CSR0: TXOP holder address0 register -// +/* */ +/* QOS_CSR0: TXOP holder address0 register */ +/* */ typedef union _QOS_CSR0_STRUC { struct { - UCHAR Byte0; // MAC address byte 0 - UCHAR Byte1; // MAC address byte 1 - UCHAR Byte2; // MAC address byte 2 - UCHAR Byte3; // MAC address byte 3 + UCHAR Byte0; /* MAC address byte 0 */ + UCHAR Byte1; /* MAC address byte 1 */ + UCHAR Byte2; /* MAC address byte 2 */ + UCHAR Byte3; /* MAC address byte 3 */ } field; UINT32 word; } QOS_CSR0_STRUC, *PQOS_CSR0_STRUC; -// -// QOS_CSR1: TXOP holder address1 register -// +/* */ +/* QOS_CSR1: TXOP holder address1 register */ +/* */ typedef union _QOS_CSR1_STRUC { struct { - UCHAR Byte4; // MAC address byte 4 - UCHAR Byte5; // MAC address byte 5 + UCHAR Byte4; /* MAC address byte 4 */ + UCHAR Byte5; /* MAC address byte 5 */ UCHAR Rsvd0; UCHAR Rsvd1; } field; @@ -1207,41 +1207,41 @@ typedef union _QOS_CSR1_STRUC { #define RF_CSR_CFG 0x500 typedef union _RF_CSR_CFG_STRUC { struct { - UINT RF_CSR_DATA:8; // DATA - UINT TESTCSR_RFACC_REGNUM:5; // RF register ID - UINT Rsvd2:3; // Reserved - UINT RF_CSR_WR:1; // 0: read 1: write - UINT RF_CSR_KICK:1; // kick RF register read/write - UINT Rsvd1:14; // Reserved + UINT RF_CSR_DATA:8; /* DATA */ + UINT TESTCSR_RFACC_REGNUM:5; /* RF register ID */ + UINT Rsvd2:3; /* Reserved */ + UINT RF_CSR_WR:1; /* 0: read 1: write */ + UINT RF_CSR_KICK:1; /* kick RF register read/write */ + UINT Rsvd1:14; /* Reserved */ } field; UINT word; } RF_CSR_CFG_STRUC, *PRF_CSR_CFG_STRUC; -// -// Other on-chip shared memory space, base = 0x2000 -// +/* */ +/* Other on-chip shared memory space, base = 0x2000 */ +/* */ -// CIS space - base address = 0x2000 +/* CIS space - base address = 0x2000 */ #define HW_CIS_BASE 0x2000 -// Carrier-sense CTS frame base address. It's where mac stores carrier-sense frame for carrier-sense function. +/* Carrier-sense CTS frame base address. It's where mac stores carrier-sense frame for carrier-sense function. */ #define HW_CS_CTS_BASE 0x7700 -// DFS CTS frame base address. It's where mac stores CTS frame for DFS. +/* DFS CTS frame base address. It's where mac stores CTS frame for DFS. */ #define HW_DFS_CTS_BASE 0x7780 #define HW_CTS_FRAME_SIZE 0x80 -// 2004-11-08 john - since NULL frame won't be that long (256 byte). We steal 16 tail bytes -// to save debugging settings -#define HW_DEBUG_SETTING_BASE 0x77f0 // 0x77f0~0x77ff total 16 bytes -#define HW_DEBUG_SETTING_BASE2 0x7770 // 0x77f0~0x77ff total 16 bytes - -// In order to support maximum 8 MBSS and its maximum length is 512 for each beacon -// Three section discontinue memory segments will be used. -// 1. The original region for BCN 0~3 -// 2. Extract memory from FCE table for BCN 4~5 -// 3. Extract memory from Pair-wise key table for BCN 6~7 -// It occupied those memory of wcid 238~253 for BCN 6 -// and wcid 222~237 for BCN 7 +/* 2004-11-08 john - since NULL frame won't be that long (256 byte). We steal 16 tail bytes */ +/* to save debugging settings */ +#define HW_DEBUG_SETTING_BASE 0x77f0 /* 0x77f0~0x77ff total 16 bytes */ +#define HW_DEBUG_SETTING_BASE2 0x7770 /* 0x77f0~0x77ff total 16 bytes */ + +/* In order to support maximum 8 MBSS and its maximum length is 512 for each beacon */ +/* Three section discontinue memory segments will be used. */ +/* 1. The original region for BCN 0~3 */ +/* 2. Extract memory from FCE table for BCN 4~5 */ +/* 3. Extract memory from Pair-wise key table for BCN 6~7 */ +/* It occupied those memory of wcid 238~253 for BCN 6 */ +/* and wcid 222~237 for BCN 7 */ #define HW_BEACON_MAX_SIZE 0x1000 /* unit: byte */ #define HW_BEACON_BASE0 0x7800 #define HW_BEACON_BASE1 0x7A00 @@ -1256,7 +1256,7 @@ typedef union _RF_CSR_CFG_STRUC { #define HW_BEACON_OFFSET 0x0200 #define HW_BEACON_CONTENT_LEN (HW_BEACON_OFFSET - TXWI_SIZE) -// HOST-MCU shared memory - base address = 0x2100 +/* HOST-MCU shared memory - base address = 0x2100 */ #define HOST_CMD_CSR 0x404 #define H2M_MAILBOX_CSR 0x7010 #define H2M_MAILBOX_CID 0x7014 @@ -1264,37 +1264,37 @@ typedef union _RF_CSR_CFG_STRUC { #define H2M_INT_SRC 0x7024 #define H2M_BBP_AGENT 0x7028 #define M2H_CMD_DONE_CSR 0x000c -#define MCU_TXOP_ARRAY_BASE 0x000c // TODO: to be provided by Albert -#define MCU_TXOP_ENTRY_SIZE 32 // TODO: to be provided by Albert -#define MAX_NUM_OF_TXOP_ENTRY 16 // TODO: must be same with 8051 firmware -#define MCU_MBOX_VERSION 0x01 // TODO: to be confirmed by Albert -#define MCU_MBOX_VERSION_OFFSET 5 // TODO: to be provided by Albert - -// -// Host DMA registers - base address 0x200 . TX0-3=EDCAQid0-3, TX4=HCCA, TX5=MGMT, -// -// -// DMA RING DESCRIPTOR -// +#define MCU_TXOP_ARRAY_BASE 0x000c /* TODO: to be provided by Albert */ +#define MCU_TXOP_ENTRY_SIZE 32 /* TODO: to be provided by Albert */ +#define MAX_NUM_OF_TXOP_ENTRY 16 /* TODO: must be same with 8051 firmware */ +#define MCU_MBOX_VERSION 0x01 /* TODO: to be confirmed by Albert */ +#define MCU_MBOX_VERSION_OFFSET 5 /* TODO: to be provided by Albert */ + +/* */ +/* Host DMA registers - base address 0x200 . TX0-3=EDCAQid0-3, TX4=HCCA, TX5=MGMT, */ +/* */ +/* */ +/* DMA RING DESCRIPTOR */ +/* */ #define E2PROM_CSR 0x0004 #define IO_CNTL_CSR 0x77d0 -// ================================================================ -// Tx / Rx / Mgmt ring descriptor definition -// ================================================================ - -// the following PID values are used to mark outgoing frame type in TXD->PID so that -// proper TX statistics can be collected based on these categories -// b3-2 of PID field - +/* ================================================================ */ +/* Tx / Rx / Mgmt ring descriptor definition */ +/* ================================================================ */ + +/* the following PID values are used to mark outgoing frame type in TXD->PID so that */ +/* proper TX statistics can be collected based on these categories */ +/* b3-2 of PID field - */ #define PID_MGMT 0x05 #define PID_BEACON 0x0c #define PID_DATA_NORMALUCAST 0x02 #define PID_DATA_AMPDU 0x04 #define PID_DATA_NO_ACK 0x08 #define PID_DATA_NOT_NORM_ACK 0x03 -// value domain of pTxD->HostQId (4-bit: 0~15) -#define QID_AC_BK 1 // meet ACI definition in 802.11e -#define QID_AC_BE 0 // meet ACI definition in 802.11e +/* value domain of pTxD->HostQId (4-bit: 0~15) */ +#define QID_AC_BK 1 /* meet ACI definition in 802.11e */ +#define QID_AC_BE 0 /* meet ACI definition in 802.11e */ #define QID_AC_VI 2 #define QID_AC_VO 3 #define QID_HCCA 4 @@ -1303,4 +1303,4 @@ typedef union _RF_CSR_CFG_STRUC { #define QID_RX 14 #define QID_OTHER 15 -#endif // __RTMP_MAC_H__ // +#endif /* __RTMP_MAC_H__ // */ Index: b/drivers/staging/rt2860/chip/rtmp_phy.h =================================================================== --- a/drivers/staging/rt2860/chip/rtmp_phy.h +++ b/drivers/staging/rt2860/chip/rtmp_phy.h @@ -74,30 +74,30 @@ #define RF_R30 30 #define RF_R31 31 -// value domain of pAd->RfIcType -#define RFIC_2820 1 // 2.4G 2T3R -#define RFIC_2850 2 // 2.4G/5G 2T3R -#define RFIC_2720 3 // 2.4G 1T2R -#define RFIC_2750 4 // 2.4G/5G 1T2R -#define RFIC_3020 5 // 2.4G 1T1R -#define RFIC_2020 6 // 2.4G B/G -#define RFIC_3021 7 // 2.4G 1T2R -#define RFIC_3022 8 // 2.4G 2T2R -#define RFIC_3052 9 // 2.4G/5G 2T2R +/* value domain of pAd->RfIcType */ +#define RFIC_2820 1 /* 2.4G 2T3R */ +#define RFIC_2850 2 /* 2.4G/5G 2T3R */ +#define RFIC_2720 3 /* 2.4G 1T2R */ +#define RFIC_2750 4 /* 2.4G/5G 1T2R */ +#define RFIC_3020 5 /* 2.4G 1T1R */ +#define RFIC_2020 6 /* 2.4G B/G */ +#define RFIC_3021 7 /* 2.4G 1T2R */ +#define RFIC_3022 8 /* 2.4G 2T2R */ +#define RFIC_3052 9 /* 2.4G/5G 2T2R */ /* BBP sections */ -#define BBP_R0 0 // version -#define BBP_R1 1 // TSSI -#define BBP_R2 2 // TX configure +#define BBP_R0 0 /* version */ +#define BBP_R1 1 /* TSSI */ +#define BBP_R2 2 /* TX configure */ #define BBP_R3 3 #define BBP_R4 4 #define BBP_R5 5 #define BBP_R6 6 -#define BBP_R14 14 // RX configure +#define BBP_R14 14 /* RX configure */ #define BBP_R16 16 -#define BBP_R17 17 // RX sensibility +#define BBP_R17 17 /* RX sensibility */ #define BBP_R18 18 #define BBP_R21 21 #define BBP_R22 22 @@ -106,12 +106,12 @@ #define BBP_R26 26 #define BBP_R27 27 #define BBP_R31 31 -#define BBP_R49 49 //TSSI +#define BBP_R49 49 /*TSSI */ #define BBP_R50 50 #define BBP_R51 51 #define BBP_R52 52 #define BBP_R55 55 -#define BBP_R62 62 // Rx SQ0 Threshold HIGH +#define BBP_R62 62 /* Rx SQ0 Threshold HIGH */ #define BBP_R63 63 #define BBP_R64 64 #define BBP_R65 65 @@ -119,7 +119,7 @@ #define BBP_R67 67 #define BBP_R68 68 #define BBP_R69 69 -#define BBP_R70 70 // Rx AGC SQ CCK Xcorr threshold +#define BBP_R70 70 /* Rx AGC SQ CCK Xcorr threshold */ #define BBP_R73 73 #define BBP_R75 75 #define BBP_R77 77 @@ -133,7 +133,7 @@ #define BBP_R86 86 #define BBP_R91 91 #define BBP_R92 92 -#define BBP_R94 94 // Tx Gain Control +#define BBP_R94 94 /* Tx Gain Control */ #define BBP_R103 103 #define BBP_R105 105 #define BBP_R106 106 @@ -149,22 +149,22 @@ #define BBP_R122 122 #define BBP_R123 123 #ifdef RT30xx -#define BBP_R138 138 // add by johnli, RF power sequence setup, ADC dynamic on/off control -#endif // RT30xx // +#define BBP_R138 138 /* add by johnli, RF power sequence setup, ADC dynamic on/off control */ +#endif /* RT30xx // */ -#define BBPR94_DEFAULT 0x06 // Add 1 value will gain 1db +#define BBPR94_DEFAULT 0x06 /* Add 1 value will gain 1db */ -// -// BBP & RF are using indirect access. Before write any value into it. -// We have to make sure there is no outstanding command pending via checking busy bit. -// -#define MAX_BUSY_COUNT 100 // Number of retry before failing access BBP & RF indirect register - -//#define PHY_TR_SWITCH_TIME 5 // usec - -//#define BBP_R17_LOW_SENSIBILITY 0x50 -//#define BBP_R17_MID_SENSIBILITY 0x41 -//#define BBP_R17_DYNAMIC_UP_BOUND 0x40 +/* */ +/* BBP & RF are using indirect access. Before write any value into it. */ +/* We have to make sure there is no outstanding command pending via checking busy bit. */ +/* */ +#define MAX_BUSY_COUNT 100 /* Number of retry before failing access BBP & RF indirect register */ + +/*#define PHY_TR_SWITCH_TIME 5 // usec */ + +/*#define BBP_R17_LOW_SENSIBILITY 0x50 */ +/*#define BBP_R17_MID_SENSIBILITY 0x41 */ +/*#define BBP_R17_DYNAMIC_UP_BOUND 0x40 */ #define RSSI_FOR_VERY_LOW_SENSIBILITY -35 #define RSSI_FOR_LOW_SENSIBILITY -58 @@ -194,15 +194,15 @@ } \ } \ } -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ #ifdef RTMP_MAC_USB #define RTMP_RF_IO_WRITE32(_A, _V) RTUSBWriteRFRegister(_A, _V) -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ #ifdef RT30xx #define RTMP_RF_IO_READ8_BY_REG_ID(_A, _I, _pV) RT30xxReadRFRegister(_A, _I, _pV) #define RTMP_RF_IO_WRITE8_BY_REG_ID(_A, _I, _V) RT30xxWriteRFRegister(_A, _I, _V) -#endif // RT30xx // +#endif /* RT30xx // */ /***************************************************************************** BBP register Read/Write marco definitions. @@ -276,7 +276,7 @@ But for some chipset which didn't have mcu (e.g., RBUS based chipset), we will use this function too and didn't access the bbp register via the MCU. */ -// Read BBP register by register's ID. Generate PER to test BA +/* Read BBP register by register's ID. Generate PER to test BA */ #define RTMP_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV) \ { \ BBP_CSR_CFG_STRUC BbpCsr; \ @@ -425,7 +425,7 @@ But for some chipset which didn't have mcu (e.g., RBUS based chipset), we will use this function too and didn't access the bbp register via the MCU. */ -// Write BBP register by register's ID & value +/* Write BBP register by register's ID & value */ #define RTMP_BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V) \ { \ BBP_CSR_CFG_STRUC BbpCsr; \ @@ -510,7 +510,7 @@ DBGPRINT_ERR(("****** BBP_Write_Latch Buffer exceeds max boundry ****** \n")); \ } \ } -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ #ifdef RTMP_MAC_USB #define RTMP_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV) RTUSBReadBBPRegister(_A, _I, _pV) @@ -518,7 +518,7 @@ #define BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V) RTUSBWriteBBPRegister(_A, _I, _V) #define BBP_IO_READ8_BY_REG_ID(_A, _I, _pV) RTUSBReadBBPRegister(_A, _I, _pV) -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ #ifdef RT30xx #define RTMP_ASIC_MMPS_DISABLE(_pAd) \ @@ -551,6 +551,6 @@ RTMP_IO_WRITE32(_pAd, 0x1210, _macData); \ }while(0) -#endif // RT30xx // +#endif /* RT30xx // */ -#endif // __RTMP_PHY_H__ // +#endif /* __RTMP_PHY_H__ // */ Index: b/drivers/staging/rt2860/chlist.h =================================================================== --- a/drivers/staging/rt2860/chlist.h +++ b/drivers/staging/rt2860/chlist.h @@ -52,14 +52,14 @@ typedef struct _CH_DESP { UCHAR FirstChannel; UCHAR NumOfCh; - CHAR MaxTxPwr; // dBm - UCHAR Geography; // 0:out door, 1:in door, 2:both - BOOLEAN DfsReq; // Dfs require, 0: No, 1: yes. + CHAR MaxTxPwr; /* dBm */ + UCHAR Geography; /* 0:out door, 1:in door, 2:both */ + BOOLEAN DfsReq; /* Dfs require, 0: No, 1: yes. */ } CH_DESP, *PCH_DESP; typedef struct _CH_REGION { UCHAR CountReg[3]; - UCHAR DfsType; // 0: CE, 1: FCC, 2: JAP, 3:JAP_W53, JAP_W56 + UCHAR DfsType; /* 0: CE, 1: FCC, 2: JAP, 3:JAP_W53, JAP_W56 */ CH_DESP ChDesp[10]; } CH_REGION, *PCH_REGION; @@ -114,4 +114,4 @@ VOID N_SetCenCh(IN PRTMP_ADAPTER pAd); UINT8 GetCuntryMaxTxPwr(IN PRTMP_ADAPTER pAd, IN UINT8 channel); -#endif // __CHLIST_H__ +#endif /* __CHLIST_H__ */ Index: b/drivers/staging/rt2860/eeprom.h =================================================================== --- a/drivers/staging/rt2860/eeprom.h +++ b/drivers/staging/rt2860/eeprom.h @@ -43,25 +43,25 @@ ************************************************************************/ int rtmp_ee_prom_read16(IN PRTMP_ADAPTER pAd, IN USHORT Offset, OUT USHORT * pValue); -#endif // RTMP_PCI_SUPPORT // +#endif /* RTMP_PCI_SUPPORT // */ #ifdef RTMP_USB_SUPPORT /************************************************************************* * Public function declarations for usb-based prom chipset ************************************************************************/ NTSTATUS RTUSBReadEEPROM16(IN PRTMP_ADAPTER pAd, IN USHORT offset, OUT PUSHORT pData); -#endif // RTMP_USB_SUPPORT // +#endif /* RTMP_USB_SUPPORT // */ #ifdef RT30xx #ifdef RTMP_EFUSE_SUPPORT int rtmp_ee_efuse_read16(IN RTMP_ADAPTER * pAd, IN USHORT Offset, OUT USHORT * pValue); -#endif // RTMP_EFUSE_SUPPORT // -#endif // RT30xx // +#endif /* RTMP_EFUSE_SUPPORT // */ +#endif /* RT30xx // */ /************************************************************************* * Public function declarations for prom operation callback functions setting ************************************************************************/ INT RtmpChipOpsEepromHook(IN RTMP_ADAPTER * pAd, IN INT infType); -#endif // __EEPROM_H__ // +#endif /* __EEPROM_H__ // */ Index: b/drivers/staging/rt2860/mlme.h =================================================================== --- a/drivers/staging/rt2860/mlme.h +++ b/drivers/staging/rt2860/mlme.h @@ -41,18 +41,18 @@ #include "rtmp_dot11.h" -// maximum supported capability information - -// ESS, IBSS, Privacy, Short Preamble, Spectrum mgmt, Short Slot +/* maximum supported capability information - */ +/* ESS, IBSS, Privacy, Short Preamble, Spectrum mgmt, Short Slot */ #define SUPPORTED_CAPABILITY_INFO 0x0533 #define END_OF_ARGS -1 #define LFSR_MASK 0x80000057 -#define MLME_TASK_EXEC_INTV 100/*200*/ // +#define MLME_TASK_EXEC_INTV 100/*200*/ /* */ #define LEAD_TIME 5 -#define MLME_TASK_EXEC_MULTIPLE 10 /*5*/ // MLME_TASK_EXEC_MULTIPLE * MLME_TASK_EXEC_INTV = 1 sec -#define REORDER_EXEC_INTV 100 // 0.1 sec +#define MLME_TASK_EXEC_MULTIPLE 10 /*5*/ /* MLME_TASK_EXEC_MULTIPLE * MLME_TASK_EXEC_INTV = 1 sec */ +#define REORDER_EXEC_INTV 100 /* 0.1 sec */ -// The definition of Radar detection duration region +/* The definition of Radar detection duration region */ #define CE 0 #define FCC 1 #define JAP 2 @@ -60,61 +60,61 @@ #define JAP_W56 4 #define MAX_RD_REGION 5 -#define BEACON_LOST_TIME 4 * OS_HZ // 2048 msec = 2 sec +#define BEACON_LOST_TIME 4 * OS_HZ /* 2048 msec = 2 sec */ -#define DLS_TIMEOUT 1200 // unit: msec -#define AUTH_TIMEOUT 300 // unit: msec -#define ASSOC_TIMEOUT 300 // unit: msec -#define JOIN_TIMEOUT 2000 // unit: msec -#define SHORT_CHANNEL_TIME 90 // unit: msec -#define MIN_CHANNEL_TIME 110 // unit: msec, for dual band scan -#define MAX_CHANNEL_TIME 140 // unit: msec, for single band scan -#define FAST_ACTIVE_SCAN_TIME 30 // Active scan waiting for probe response time -#define CW_MIN_IN_BITS 4 // actual CwMin = 2^CW_MIN_IN_BITS - 1 -#define LINK_DOWN_TIMEOUT 20000 // unit: msec -#define AUTO_WAKEUP_TIMEOUT 70 //unit: msec - -#define CW_MAX_IN_BITS 10 // actual CwMax = 2^CW_MAX_IN_BITS - 1 - -// Note: RSSI_TO_DBM_OFFSET has been changed to variable for new RF (2004-0720). -// SHould not refer to this constant anymore -//#define RSSI_TO_DBM_OFFSET 120 // for RT2530 RSSI-115 = dBm -#define RSSI_FOR_MID_TX_POWER -55 // -55 db is considered mid-distance -#define RSSI_FOR_LOW_TX_POWER -45 // -45 db is considered very short distance and - // eligible to use a lower TX power +#define DLS_TIMEOUT 1200 /* unit: msec */ +#define AUTH_TIMEOUT 300 /* unit: msec */ +#define ASSOC_TIMEOUT 300 /* unit: msec */ +#define JOIN_TIMEOUT 2000 /* unit: msec */ +#define SHORT_CHANNEL_TIME 90 /* unit: msec */ +#define MIN_CHANNEL_TIME 110 /* unit: msec, for dual band scan */ +#define MAX_CHANNEL_TIME 140 /* unit: msec, for single band scan */ +#define FAST_ACTIVE_SCAN_TIME 30 /* Active scan waiting for probe response time */ +#define CW_MIN_IN_BITS 4 /* actual CwMin = 2^CW_MIN_IN_BITS - 1 */ +#define LINK_DOWN_TIMEOUT 20000 /* unit: msec */ +#define AUTO_WAKEUP_TIMEOUT 70 /*unit: msec */ + +#define CW_MAX_IN_BITS 10 /* actual CwMax = 2^CW_MAX_IN_BITS - 1 */ + +/* Note: RSSI_TO_DBM_OFFSET has been changed to variable for new RF (2004-0720). */ +/* SHould not refer to this constant anymore */ +/*#define RSSI_TO_DBM_OFFSET 120 // for RT2530 RSSI-115 = dBm */ +#define RSSI_FOR_MID_TX_POWER -55 /* -55 db is considered mid-distance */ +#define RSSI_FOR_LOW_TX_POWER -45 /* -45 db is considered very short distance and */ + /* eligible to use a lower TX power */ #define RSSI_FOR_LOWEST_TX_POWER -30 -//#define MID_TX_POWER_DELTA 0 // 0 db from full TX power upon mid-distance to AP -#define LOW_TX_POWER_DELTA 6 // -3 db from full TX power upon very short distance. 1 grade is 0.5 db -#define LOWEST_TX_POWER_DELTA 16 // -8 db from full TX power upon shortest distance. 1 grade is 0.5 db +/*#define MID_TX_POWER_DELTA 0 // 0 db from full TX power upon mid-distance to AP */ +#define LOW_TX_POWER_DELTA 6 /* -3 db from full TX power upon very short distance. 1 grade is 0.5 db */ +#define LOWEST_TX_POWER_DELTA 16 /* -8 db from full TX power upon shortest distance. 1 grade is 0.5 db */ #define RSSI_TRIGGERED_UPON_BELOW_THRESHOLD 0 #define RSSI_TRIGGERED_UPON_EXCCEED_THRESHOLD 1 #define RSSI_THRESHOLD_FOR_ROAMING 25 #define RSSI_DELTA 5 -// Channel Quality Indication +/* Channel Quality Indication */ #define CQI_IS_GOOD(cqi) ((cqi) >= 50) -//#define CQI_IS_FAIR(cqi) (((cqi) >= 20) && ((cqi) < 50)) -#define CQI_IS_POOR(cqi) (cqi < 50) //(((cqi) >= 5) && ((cqi) < 20)) +/*#define CQI_IS_FAIR(cqi) (((cqi) >= 20) && ((cqi) < 50)) */ +#define CQI_IS_POOR(cqi) (cqi < 50) /*(((cqi) >= 5) && ((cqi) < 20)) */ #define CQI_IS_BAD(cqi) (cqi < 5) #define CQI_IS_DEAD(cqi) (cqi == 0) -// weighting factor to calculate Channel quality, total should be 100% +/* weighting factor to calculate Channel quality, total should be 100% */ #define RSSI_WEIGHTING 50 #define TX_WEIGHTING 30 #define RX_WEIGHTING 20 #define BSS_NOT_FOUND 0xFFFFFFFF -#define MAX_LEN_OF_MLME_QUEUE 40 //10 +#define MAX_LEN_OF_MLME_QUEUE 40 /*10 */ -#define SCAN_PASSIVE 18 // scan with no probe request, only wait beacon and probe response -#define SCAN_ACTIVE 19 // scan with probe request, and wait beacon and probe response -#define SCAN_CISCO_PASSIVE 20 // Single channel passive scan -#define SCAN_CISCO_ACTIVE 21 // Single channel active scan -#define SCAN_CISCO_NOISE 22 // Single channel passive scan for noise histogram collection -#define SCAN_CISCO_CHANNEL_LOAD 23 // Single channel passive scan for channel load collection -#define FAST_SCAN_ACTIVE 24 // scan with probe request, and wait beacon and probe response +#define SCAN_PASSIVE 18 /* scan with no probe request, only wait beacon and probe response */ +#define SCAN_ACTIVE 19 /* scan with probe request, and wait beacon and probe response */ +#define SCAN_CISCO_PASSIVE 20 /* Single channel passive scan */ +#define SCAN_CISCO_ACTIVE 21 /* Single channel active scan */ +#define SCAN_CISCO_NOISE 22 /* Single channel passive scan for noise histogram collection */ +#define SCAN_CISCO_CHANNEL_LOAD 23 /* Single channel passive scan for channel load collection */ +#define FAST_SCAN_ACTIVE 24 /* scan with probe request, and wait beacon and probe response */ #define MAC_ADDR_IS_GROUP(Addr) (((Addr[0]) & 0x01)) #define MAC_ADDR_HASH(Addr) (Addr[0] ^ Addr[1] ^ Addr[2] ^ Addr[3] ^ Addr[4] ^ Addr[5]) @@ -122,13 +122,13 @@ #define TID_MAC_HASH(Addr,TID) (TID^Addr[0] ^ Addr[1] ^ Addr[2] ^ Addr[3] ^ Addr[4] ^ Addr[5]) #define TID_MAC_HASH_INDEX(Addr,TID) (TID_MAC_HASH(Addr,TID) % HASH_TABLE_SIZE) -// LED Control -// assoiation ON. one LED ON. another blinking when TX, OFF when idle -// no association, both LED off +/* LED Control */ +/* assoiation ON. one LED ON. another blinking when TX, OFF when idle */ +/* no association, both LED off */ #define ASIC_LED_ACT_ON(pAd) RTMP_IO_WRITE32(pAd, MAC_CSR14, 0x00031e46) #define ASIC_LED_ACT_OFF(pAd) RTMP_IO_WRITE32(pAd, MAC_CSR14, 0x00001e46) -// bit definition of the 2-byte pBEACON->Capability field +/* bit definition of the 2-byte pBEACON->Capability field */ #define CAP_IS_ESS_ON(x) (((x) & 0x0001) != 0) #define CAP_IS_IBSS_ON(x) (((x) & 0x0002) != 0) #define CAP_IS_CF_POLLABLE_ON(x) (((x) & 0x0004) != 0) @@ -137,44 +137,44 @@ #define CAP_IS_SHORT_PREAMBLE_ON(x) (((x) & 0x0020) != 0) #define CAP_IS_PBCC_ON(x) (((x) & 0x0040) != 0) #define CAP_IS_AGILITY_ON(x) (((x) & 0x0080) != 0) -#define CAP_IS_SPECTRUM_MGMT(x) (((x) & 0x0100) != 0) // 802.11e d9 -#define CAP_IS_QOS(x) (((x) & 0x0200) != 0) // 802.11e d9 +#define CAP_IS_SPECTRUM_MGMT(x) (((x) & 0x0100) != 0) /* 802.11e d9 */ +#define CAP_IS_QOS(x) (((x) & 0x0200) != 0) /* 802.11e d9 */ #define CAP_IS_SHORT_SLOT(x) (((x) & 0x0400) != 0) -#define CAP_IS_APSD(x) (((x) & 0x0800) != 0) // 802.11e d9 -#define CAP_IS_IMMED_BA(x) (((x) & 0x1000) != 0) // 802.11e d9 +#define CAP_IS_APSD(x) (((x) & 0x0800) != 0) /* 802.11e d9 */ +#define CAP_IS_IMMED_BA(x) (((x) & 0x1000) != 0) /* 802.11e d9 */ #define CAP_IS_DSSS_OFDM(x) (((x) & 0x2000) != 0) -#define CAP_IS_DELAY_BA(x) (((x) & 0x4000) != 0) // 802.11e d9 +#define CAP_IS_DELAY_BA(x) (((x) & 0x4000) != 0) /* 802.11e d9 */ #define CAP_GENERATE(ess,ibss,priv,s_pre,s_slot,spectrum) (((ess) ? 0x0001 : 0x0000) | ((ibss) ? 0x0002 : 0x0000) | ((priv) ? 0x0010 : 0x0000) | ((s_pre) ? 0x0020 : 0x0000) | ((s_slot) ? 0x0400 : 0x0000) | ((spectrum) ? 0x0100 : 0x0000)) -#define ERP_IS_NON_ERP_PRESENT(x) (((x) & 0x01) != 0) // 802.11g -#define ERP_IS_USE_PROTECTION(x) (((x) & 0x02) != 0) // 802.11g -#define ERP_IS_USE_BARKER_PREAMBLE(x) (((x) & 0x04) != 0) // 802.11g +#define ERP_IS_NON_ERP_PRESENT(x) (((x) & 0x01) != 0) /* 802.11g */ +#define ERP_IS_USE_PROTECTION(x) (((x) & 0x02) != 0) /* 802.11g */ +#define ERP_IS_USE_BARKER_PREAMBLE(x) (((x) & 0x04) != 0) /* 802.11g */ -#define DRS_TX_QUALITY_WORST_BOUND 8 // 3 // just test by gary +#define DRS_TX_QUALITY_WORST_BOUND 8 /* 3 // just test by gary */ #define DRS_PENALTY 8 #define BA_NOTUSE 2 -//BA Policy subfiled value in ADDBA frame +/*BA Policy subfiled value in ADDBA frame */ #define IMMED_BA 1 #define DELAY_BA 0 -// BA Initiator subfield in DELBA frame +/* BA Initiator subfield in DELBA frame */ #define ORIGINATOR 1 #define RECIPIENT 0 -// ADDBA Status Code +/* ADDBA Status Code */ #define ADDBA_RESULTCODE_SUCCESS 0 #define ADDBA_RESULTCODE_REFUSED 37 #define ADDBA_RESULTCODE_INVALID_PARAMETERS 38 -// DELBA Reason Code +/* DELBA Reason Code */ #define DELBA_REASONCODE_QSTA_LEAVING 36 #define DELBA_REASONCODE_END_BA 37 #define DELBA_REASONCODE_UNKNOWN_BA 38 #define DELBA_REASONCODE_TIMEOUT 39 -// reset all OneSecTx counters +/* reset all OneSecTx counters */ #define RESET_ONE_SEC_TX_CNT(__pEntry) \ if (((__pEntry)) != NULL) \ { \ @@ -183,38 +183,38 @@ if (((__pEntry)) != NULL) \ (__pEntry)->OneSecTxNoRetryOkCount = 0; \ } -// -// 802.11 frame formats -// -// HT Capability INFO field in HT Cap IE . +/* */ +/* 802.11 frame formats */ +/* */ +/* HT Capability INFO field in HT Cap IE . */ typedef struct PACKED { USHORT AdvCoding:1; USHORT ChannelWidth:1; - USHORT MimoPs:2; //momi power safe - USHORT GF:1; //green field + USHORT MimoPs:2; /*momi power safe */ + USHORT GF:1; /*green field */ USHORT ShortGIfor20:1; - USHORT ShortGIfor40:1; //for40MHz + USHORT ShortGIfor40:1; /*for40MHz */ USHORT TxSTBC:1; USHORT RxSTBC:2; - USHORT DelayedBA:1; //rt2860c not support - USHORT AMsduSize:1; // only support as zero + USHORT DelayedBA:1; /*rt2860c not support */ + USHORT AMsduSize:1; /* only support as zero */ USHORT CCKmodein40:1; USHORT PSMP:1; USHORT Forty_Mhz_Intolerant:1; USHORT LSIGTxopProSup:1; } HT_CAP_INFO, *PHT_CAP_INFO; -// HT Capability INFO field in HT Cap IE . +/* HT Capability INFO field in HT Cap IE . */ typedef struct PACKED { UCHAR MaxRAmpduFactor:2; UCHAR MpduDensity:3; - UCHAR rsv:3; //momi power safe + UCHAR rsv:3; /*momi power safe */ } HT_CAP_PARM, *PHT_CAP_PARM; -// HT Capability INFO field in HT Cap IE . +/* HT Capability INFO field in HT Cap IE . */ typedef struct PACKED { UCHAR MCSSet[10]; - UCHAR SupRate[2]; // unit : 1Mbps + UCHAR SupRate[2]; /* unit : 1Mbps */ UCHAR TxMCSSetDefined:1; UCHAR TxRxNotEqual:1; UCHAR TxStream:2; @@ -223,18 +223,18 @@ typedef struct PACKED { UCHAR rsv3[3]; } HT_MCS_SET, *PHT_MCS_SET; -// HT Capability INFO field in HT Cap IE . +/* HT Capability INFO field in HT Cap IE . */ typedef struct PACKED { USHORT Pco:1; USHORT TranTime:2; - USHORT rsv:5; //momi power safe - USHORT MCSFeedback:2; //0:no MCS feedback, 2:unsolicited MCS feedback, 3:Full MCS feedback, 1:rsv. - USHORT PlusHTC:1; //+HTC control field support - USHORT RDGSupport:1; //reverse Direction Grant support + USHORT rsv:5; /*momi power safe */ + USHORT MCSFeedback:2; /*0:no MCS feedback, 2:unsolicited MCS feedback, 3:Full MCS feedback, 1:rsv. */ + USHORT PlusHTC:1; /*+HTC control field support */ + USHORT RDGSupport:1; /*reverse Direction Grant support */ USHORT rsv2:4; } EXT_HT_CAP_INFO, *PEXT_HT_CAP_INFO; -// HT Beamforming field in HT Cap IE . +/* HT Beamforming field in HT Cap IE . */ typedef struct PACKED _HT_BF_CAP { ULONG TxBFRecCapable:1; ULONG RxSoundCapable:1; @@ -258,7 +258,7 @@ typedef struct PACKED _HT_BF_CAP { ULONG rsv:3; } HT_BF_CAP, *PHT_BF_CAP; -// HT antenna selection field in HT Cap IE . +/* HT antenna selection field in HT Cap IE . */ typedef struct PACKED _HT_AS_CAP { UCHAR AntSelect:1; UCHAR ExpCSIFbkTxASEL:1; @@ -270,48 +270,48 @@ typedef struct PACKED _HT_AS_CAP { UCHAR rsv:1; } HT_AS_CAP, *PHT_AS_CAP; -// Draft 1.0 set IE length 26, but is extensible.. +/* Draft 1.0 set IE length 26, but is extensible.. */ #define SIZE_HT_CAP_IE 26 -// The structure for HT Capability IE. +/* The structure for HT Capability IE. */ typedef struct PACKED _HT_CAPABILITY_IE { HT_CAP_INFO HtCapInfo; HT_CAP_PARM HtCapParm; -// HT_MCS_SET HtMCSSet; +/* HT_MCS_SET HtMCSSet; */ UCHAR MCSSet[16]; EXT_HT_CAP_INFO ExtHtCapInfo; - HT_BF_CAP TxBFCap; // beamforming cap. rt2860c not support beamforming. - HT_AS_CAP ASCap; //antenna selection. + HT_BF_CAP TxBFCap; /* beamforming cap. rt2860c not support beamforming. */ + HT_AS_CAP ASCap; /*antenna selection. */ } HT_CAPABILITY_IE, *PHT_CAPABILITY_IE; -// 802.11n draft3 related structure definitions. -// 7.3.2.60 -#define dot11OBSSScanPassiveDwell 20 // in TU. min amount of time that the STA continously scans each channel when performing an active OBSS scan. -#define dot11OBSSScanActiveDwell 10 // in TU.min amount of time that the STA continously scans each channel when performing an passive OBSS scan. -#define dot11BSSWidthTriggerScanInterval 300 // in sec. max interval between scan operations to be performed to detect BSS channel width trigger events. -#define dot11OBSSScanPassiveTotalPerChannel 200 // in TU. min total amount of time that the STA scans each channel when performing a passive OBSS scan. -#define dot11OBSSScanActiveTotalPerChannel 20 //in TU. min total amount of time that the STA scans each channel when performing a active OBSS scan -#define dot11BSSWidthChannelTransactionDelayFactor 5 // min ratio between the delay time in performing a switch from 20MHz BSS to 20/40 BSS operation and the maximum - // interval between overlapping BSS scan operations. -#define dot11BSSScanActivityThreshold 25 // in %%, max total time that a STA may be active on the medium during a period of - // (dot11BSSWidthChannelTransactionDelayFactor * dot11BSSWidthTriggerScanInterval) seconds without - // being obligated to perform OBSS Scan operations. default is 25(== 0.25%) +/* 802.11n draft3 related structure definitions. */ +/* 7.3.2.60 */ +#define dot11OBSSScanPassiveDwell 20 /* in TU. min amount of time that the STA continously scans each channel when performing an active OBSS scan. */ +#define dot11OBSSScanActiveDwell 10 /* in TU.min amount of time that the STA continously scans each channel when performing an passive OBSS scan. */ +#define dot11BSSWidthTriggerScanInterval 300 /* in sec. max interval between scan operations to be performed to detect BSS channel width trigger events. */ +#define dot11OBSSScanPassiveTotalPerChannel 200 /* in TU. min total amount of time that the STA scans each channel when performing a passive OBSS scan. */ +#define dot11OBSSScanActiveTotalPerChannel 20 /*in TU. min total amount of time that the STA scans each channel when performing a active OBSS scan */ +#define dot11BSSWidthChannelTransactionDelayFactor 5 /* min ratio between the delay time in performing a switch from 20MHz BSS to 20/40 BSS operation and the maximum */ + /* interval between overlapping BSS scan operations. */ +#define dot11BSSScanActivityThreshold 25 /* in %%, max total time that a STA may be active on the medium during a period of */ + /* (dot11BSSWidthChannelTransactionDelayFactor * dot11BSSWidthTriggerScanInterval) seconds without */ + /* being obligated to perform OBSS Scan operations. default is 25(== 0.25%) */ typedef struct PACKED _OVERLAP_BSS_SCAN_IE { USHORT ScanPassiveDwell; USHORT ScanActiveDwell; - USHORT TriggerScanInt; // Trigger scan interval - USHORT PassiveTalPerChannel; // passive total per channel - USHORT ActiveTalPerChannel; // active total per channel - USHORT DelayFactor; // BSS width channel transition delay factor - USHORT ScanActThre; // Scan Activity threshold + USHORT TriggerScanInt; /* Trigger scan interval */ + USHORT PassiveTalPerChannel; /* passive total per channel */ + USHORT ActiveTalPerChannel; /* active total per channel */ + USHORT DelayFactor; /* BSS width channel transition delay factor */ + USHORT ScanActThre; /* Scan Activity threshold */ } OVERLAP_BSS_SCAN_IE, *POVERLAP_BSS_SCAN_IE; -// 7.3.2.56. 20/40 Coexistence element used in Element ID = 72 = IE_2040_BSS_COEXIST +/* 7.3.2.56. 20/40 Coexistence element used in Element ID = 72 = IE_2040_BSS_COEXIST */ typedef union PACKED _BSS_2040_COEXIST_IE { struct PACKED { UCHAR InfoReq:1; - UCHAR Intolerant40:1; // Inter-BSS. set 1 when prohibits a receiving BSS from operating as a 20/40 Mhz BSS. - UCHAR BSS20WidthReq:1; // Intra-BSS set 1 when prohibits a receiving AP from operating its BSS as a 20/40MHz BSS. + UCHAR Intolerant40:1; /* Inter-BSS. set 1 when prohibits a receiving BSS from operating as a 20/40 Mhz BSS. */ + UCHAR BSS20WidthReq:1; /* Intra-BSS set 1 when prohibits a receiving AP from operating its BSS as a 20/40MHz BSS. */ UCHAR rsv:5; } field; UCHAR word; @@ -320,22 +320,22 @@ typedef union PACKED _BSS_2040_COEXIST_I typedef struct _TRIGGER_EVENTA { BOOLEAN bValid; UCHAR BSSID[6]; - UCHAR RegClass; // Regulatory Class + UCHAR RegClass; /* Regulatory Class */ USHORT Channel; - ULONG CDCounter; // Maintain a seperate count down counter for each Event A. + ULONG CDCounter; /* Maintain a seperate count down counter for each Event A. */ } TRIGGER_EVENTA, *PTRIGGER_EVENTA; -// 20/40 trigger event table -// If one Event A delete or created, or if Event B is detected or not detected, STA should send 2040BSSCoexistence to AP. +/* 20/40 trigger event table */ +/* If one Event A delete or created, or if Event B is detected or not detected, STA should send 2040BSSCoexistence to AP. */ #define MAX_TRIGGER_EVENT 64 typedef struct _TRIGGER_EVENT_TAB { UCHAR EventANo; TRIGGER_EVENTA EventA[MAX_TRIGGER_EVENT]; - ULONG EventBCountDown; // Count down counter for Event B. + ULONG EventBCountDown; /* Count down counter for Event B. */ } TRIGGER_EVENT_TAB, *PTRIGGER_EVENT_TAB; -// 7.3.27 20/40 Bss Coexistence Mgmt capability used in extended capabilities information IE( ID = 127 = IE_EXT_CAPABILITY). -// This is the first octet and was defined in 802.11n D3.03 and 802.11yD9.0 +/* 7.3.27 20/40 Bss Coexistence Mgmt capability used in extended capabilities information IE( ID = 127 = IE_EXT_CAPABILITY). */ +/* This is the first octet and was defined in 802.11n D3.03 and 802.11yD9.0 */ typedef struct PACKED _EXT_CAP_INFO_ELEMENT { UCHAR BssCoexistMgmtSupport:1; UCHAR rsv:1; @@ -343,59 +343,59 @@ typedef struct PACKED _EXT_CAP_INFO_ELEM UCHAR rsv2:5; } EXT_CAP_INFO_ELEMENT, *PEXT_CAP_INFO_ELEMENT; -// 802.11n 7.3.2.61 +/* 802.11n 7.3.2.61 */ typedef struct PACKED _BSS_2040_COEXIST_ELEMENT { - UCHAR ElementID; // ID = IE_2040_BSS_COEXIST = 72 + UCHAR ElementID; /* ID = IE_2040_BSS_COEXIST = 72 */ UCHAR Len; BSS_2040_COEXIST_IE BssCoexistIe; } BSS_2040_COEXIST_ELEMENT, *PBSS_2040_COEXIST_ELEMENT; -//802.11n 7.3.2.59 +/*802.11n 7.3.2.59 */ typedef struct PACKED _BSS_2040_INTOLERANT_CH_REPORT { - UCHAR ElementID; // ID = IE_2040_BSS_INTOLERANT_REPORT = 73 + UCHAR ElementID; /* ID = IE_2040_BSS_INTOLERANT_REPORT = 73 */ UCHAR Len; UCHAR RegulatoryClass; UCHAR ChList[0]; } BSS_2040_INTOLERANT_CH_REPORT, *PBSS_2040_INTOLERANT_CH_REPORT; -// The structure for channel switch annoucement IE. This is in 802.11n D3.03 +/* The structure for channel switch annoucement IE. This is in 802.11n D3.03 */ typedef struct PACKED _CHA_SWITCH_ANNOUNCE_IE { - UCHAR SwitchMode; //channel switch mode - UCHAR NewChannel; // - UCHAR SwitchCount; // + UCHAR SwitchMode; /*channel switch mode */ + UCHAR NewChannel; /* */ + UCHAR SwitchCount; /* */ } CHA_SWITCH_ANNOUNCE_IE, *PCHA_SWITCH_ANNOUNCE_IE; -// The structure for channel switch annoucement IE. This is in 802.11n D3.03 +/* The structure for channel switch annoucement IE. This is in 802.11n D3.03 */ typedef struct PACKED _SEC_CHA_OFFSET_IE { - UCHAR SecondaryChannelOffset; // 1: Secondary above, 3: Secondary below, 0: no Secondary + UCHAR SecondaryChannelOffset; /* 1: Secondary above, 3: Secondary below, 0: no Secondary */ } SEC_CHA_OFFSET_IE, *PSEC_CHA_OFFSET_IE; -// This structure is extracted from struct RT_HT_CAPABILITY +/* This structure is extracted from struct RT_HT_CAPABILITY */ typedef struct { - BOOLEAN bHtEnable; // If we should use ht rate. - BOOLEAN bPreNHt; // If we should use ht rate. - //Substract from HT Capability IE + BOOLEAN bHtEnable; /* If we should use ht rate. */ + BOOLEAN bPreNHt; /* If we should use ht rate. */ + /*Substract from HT Capability IE */ UCHAR MCSSet[16]; } RT_HT_PHY_INFO, *PRT_HT_PHY_INFO; -//This structure substracts ralink supports from all 802.11n-related features. -//Features not listed here but contained in 802.11n spec are not supported in rt2860. +/*This structure substracts ralink supports from all 802.11n-related features. */ +/*Features not listed here but contained in 802.11n spec are not supported in rt2860. */ typedef struct { USHORT ChannelWidth:1; - USHORT MimoPs:2; //mimo power safe MMPS_ - USHORT GF:1; //green field + USHORT MimoPs:2; /*mimo power safe MMPS_ */ + USHORT GF:1; /*green field */ USHORT ShortGIfor20:1; - USHORT ShortGIfor40:1; //for40MHz + USHORT ShortGIfor40:1; /*for40MHz */ USHORT TxSTBC:1; - USHORT RxSTBC:2; // 2 bits - USHORT AmsduEnable:1; // Enable to transmit A-MSDU. Suggest disable. We should use A-MPDU to gain best benifit of 802.11n - USHORT AmsduSize:1; // Max receiving A-MSDU size + USHORT RxSTBC:2; /* 2 bits */ + USHORT AmsduEnable:1; /* Enable to transmit A-MSDU. Suggest disable. We should use A-MPDU to gain best benifit of 802.11n */ + USHORT AmsduSize:1; /* Max receiving A-MSDU size */ USHORT rsv:5; - //Substract from Addiont HT INFO IE + /*Substract from Addiont HT INFO IE */ UCHAR MaxRAmpduFactor:2; UCHAR MpduDensity:3; - UCHAR ExtChanOffset:2; // Please not the difference with following UCHAR NewExtChannelOffset; from 802.11n + UCHAR ExtChanOffset:2; /* Please not the difference with following UCHAR NewExtChannelOffset; from 802.11n */ UCHAR RecomWidth:1; USHORT OperaionMode:2; @@ -404,19 +404,19 @@ typedef struct { USHORT OBSS_NonHTExist:1; USHORT rsv2:11; - // New Extension Channel Offset IE + /* New Extension Channel Offset IE */ UCHAR NewExtChannelOffset; - // Extension Capability IE = 127 + /* Extension Capability IE = 127 */ UCHAR BSSCoexist2040; } RT_HT_CAPABILITY, *PRT_HT_CAPABILITY; -// field in Addtional HT Information IE . +/* field in Addtional HT Information IE . */ typedef struct PACKED { UCHAR ExtChanOffset:2; UCHAR RecomWidth:1; UCHAR RifsMode:1; - UCHAR S_PSMPSup:1; //Indicate support for scheduled PSMP - UCHAR SerInterGranu:3; //service interval granularity + UCHAR S_PSMPSup:1; /*Indicate support for scheduled PSMP */ + UCHAR SerInterGranu:3; /*service interval granularity */ } ADD_HTINFO, *PADD_HTINFO; typedef struct PACKED { @@ -427,13 +427,13 @@ typedef struct PACKED { USHORT rsv2:11; } ADD_HTINFO2, *PADD_HTINFO2; -// TODO: Need sync with spec about the definition of StbcMcs. In Draft 3.03, it's reserved. +/* TODO: Need sync with spec about the definition of StbcMcs. In Draft 3.03, it's reserved. */ typedef struct PACKED { USHORT StbcMcs:6; USHORT DualBeacon:1; USHORT DualCTSProtect:1; USHORT STBCBeacon:1; - USHORT LsigTxopProt:1; // L-SIG TXOP protection full support + USHORT LsigTxopProt:1; /* L-SIG TXOP protection full support */ USHORT PcoActive:1; USHORT PcoPhase:1; USHORT rsv:4; @@ -445,7 +445,7 @@ typedef struct PACKED { ADD_HTINFO AddHtInfo; ADD_HTINFO2 AddHtInfo2; ADD_HTINFO3 AddHtInfo3; - UCHAR MCSSet[16]; // Basic MCS set + UCHAR MCSSet[16]; /* Basic MCS set */ } ADD_HT_INFO_IE, *PADD_HT_INFO_IE; typedef struct PACKED { @@ -457,7 +457,7 @@ typedef struct PACKED _FRAME_802_11 { UCHAR Octet[1]; } FRAME_802_11, *PFRAME_802_11; -// QoSNull embedding of management action. When HT Control MA field set to 1. +/* QoSNull embedding of management action. When HT Control MA field set to 1. */ typedef struct PACKED _MA_BODY { UCHAR Category; UCHAR Action; @@ -469,51 +469,51 @@ typedef struct PACKED _HEADER_802_3 { UCHAR SAAddr2[MAC_ADDR_LEN]; UCHAR Octet[2]; } HEADER_802_3, *PHEADER_802_3; -////Block ACK related format -// 2-byte BA Parameter field in DELBA frames to terminate an already set up bA +/*//Block ACK related format */ +/* 2-byte BA Parameter field in DELBA frames to terminate an already set up bA */ typedef struct PACKED { - USHORT Rsv:11; // always set to 0 - USHORT Initiator:1; // 1: originator 0:recipient - USHORT TID:4; // value of TC os TS + USHORT Rsv:11; /* always set to 0 */ + USHORT Initiator:1; /* 1: originator 0:recipient */ + USHORT TID:4; /* value of TC os TS */ } DELBA_PARM, *PDELBA_PARM; -// 2-byte BA Parameter Set field in ADDBA frames to signal parm for setting up a BA +/* 2-byte BA Parameter Set field in ADDBA frames to signal parm for setting up a BA */ typedef struct PACKED { - USHORT AMSDUSupported:1; // 0: not permitted 1: permitted - USHORT BAPolicy:1; // 1: immediately BA 0:delayed BA - USHORT TID:4; // value of TC os TS - USHORT BufSize:10; // number of buffe of size 2304 octetsr + USHORT AMSDUSupported:1; /* 0: not permitted 1: permitted */ + USHORT BAPolicy:1; /* 1: immediately BA 0:delayed BA */ + USHORT TID:4; /* value of TC os TS */ + USHORT BufSize:10; /* number of buffe of size 2304 octetsr */ } BA_PARM, *PBA_PARM; -// 2-byte BA Starting Seq CONTROL field +/* 2-byte BA Starting Seq CONTROL field */ typedef union PACKED { struct PACKED { - USHORT FragNum:4; // always set to 0 - USHORT StartSeq:12; // sequence number of the 1st MSDU for which this BAR is sent + USHORT FragNum:4; /* always set to 0 */ + USHORT StartSeq:12; /* sequence number of the 1st MSDU for which this BAR is sent */ } field; USHORT word; } BASEQ_CONTROL, *PBASEQ_CONTROL; -//BAControl and BARControl are the same -// 2-byte BA CONTROL field in BA frame +/*BAControl and BARControl are the same */ +/* 2-byte BA CONTROL field in BA frame */ typedef struct PACKED { - USHORT ACKPolicy:1; // only related to N-Delayed BA. But not support in RT2860b. 0:NormalACK 1:No ACK - USHORT MTID:1; //EWC V1.24 + USHORT ACKPolicy:1; /* only related to N-Delayed BA. But not support in RT2860b. 0:NormalACK 1:No ACK */ + USHORT MTID:1; /*EWC V1.24 */ USHORT Compressed:1; USHORT Rsv:9; USHORT TID:4; } BA_CONTROL, *PBA_CONTROL; -// 2-byte BAR CONTROL field in BAR frame +/* 2-byte BAR CONTROL field in BAR frame */ typedef struct PACKED { - USHORT ACKPolicy:1; // 0:normal ack, 1:no ack. - USHORT MTID:1; //if this bit1, use FRAME_MTBA_REQ, if 0, use FRAME_BA_REQ + USHORT ACKPolicy:1; /* 0:normal ack, 1:no ack. */ + USHORT MTID:1; /*if this bit1, use FRAME_MTBA_REQ, if 0, use FRAME_BA_REQ */ USHORT Compressed:1; USHORT Rsv1:9; USHORT TID:4; } BAR_CONTROL, *PBAR_CONTROL; -// BARControl in MTBAR frame +/* BARControl in MTBAR frame */ typedef struct PACKED { USHORT ACKPolicy:1; USHORT MTID:1; @@ -532,7 +532,7 @@ typedef struct { BASEQ_CONTROL BAStartingSeq; } EACH_TID, *PEACH_TID; -// BAREQ AND MTBAREQ have the same subtype BAR, 802.11n BAR use compressed bitmap. +/* BAREQ AND MTBAREQ have the same subtype BAR, 802.11n BAR use compressed bitmap. */ typedef struct PACKED _FRAME_BA_REQ { FRAME_CONTROL FC; USHORT Duration; @@ -552,7 +552,7 @@ typedef struct PACKED _FRAME_MTBA_REQ { BASEQ_CONTROL BAStartingSeq; } FRAME_MTBA_REQ, *PFRAME_MTBA_REQ; -// Compressed format is mandantory in HT STA +/* Compressed format is mandantory in HT STA */ typedef struct PACKED _FRAME_MTBA { FRAME_CONTROL FC; USHORT Duration; @@ -567,7 +567,7 @@ typedef struct PACKED _FRAME_PSMP_ACTION HEADER_802_11 Hdr; UCHAR Category; UCHAR Action; - UCHAR Psmp; // 7.3.1.25 + UCHAR Psmp; /* 7.3.1.25 */ } FRAME_PSMP_ACTION, *PFRAME_PSMP_ACTION; typedef struct PACKED _FRAME_ACTION_HDR { @@ -576,17 +576,17 @@ typedef struct PACKED _FRAME_ACTION_HDR UCHAR Action; } FRAME_ACTION_HDR, *PFRAME_ACTION_HDR; -//Action Frame -//Action Frame Category:Spectrum, Action:Channel Switch. 7.3.2.20 +/*Action Frame */ +/*Action Frame Category:Spectrum, Action:Channel Switch. 7.3.2.20 */ typedef struct PACKED _CHAN_SWITCH_ANNOUNCE { - UCHAR ElementID; // ID = IE_CHANNEL_SWITCH_ANNOUNCEMENT = 37 + UCHAR ElementID; /* ID = IE_CHANNEL_SWITCH_ANNOUNCEMENT = 37 */ UCHAR Len; CHA_SWITCH_ANNOUNCE_IE CSAnnounceIe; } CHAN_SWITCH_ANNOUNCE, *PCHAN_SWITCH_ANNOUNCE; -//802.11n : 7.3.2.20a +/*802.11n : 7.3.2.20a */ typedef struct PACKED _SECOND_CHAN_OFFSET { - UCHAR ElementID; // ID = IE_SECONDARY_CH_OFFSET = 62 + UCHAR ElementID; /* ID = IE_SECONDARY_CH_OFFSET = 62 */ UCHAR Len; SEC_CHA_OFFSET_IE SecChOffsetIe; } SECOND_CHAN_OFFSET, *PSECOND_CHAN_OFFSET; @@ -603,10 +603,10 @@ typedef struct PACKED _FRAME_ADDBA_REQ { HEADER_802_11 Hdr; UCHAR Category; UCHAR Action; - UCHAR Token; // 1 - BA_PARM BaParm; // 2 - 10 - USHORT TimeOutValue; // 0 - 0 - BASEQ_CONTROL BaStartSeq; // 0-0 + UCHAR Token; /* 1 */ + BA_PARM BaParm; /* 2 - 10 */ + USHORT TimeOutValue; /* 0 - 0 */ + BASEQ_CONTROL BaStartSeq; /* 0-0 */ } FRAME_ADDBA_REQ, *PFRAME_ADDBA_REQ; typedef struct PACKED _FRAME_ADDBA_RSP { @@ -615,7 +615,7 @@ typedef struct PACKED _FRAME_ADDBA_RSP { UCHAR Action; UCHAR Token; USHORT StatusCode; - BA_PARM BaParm; //0 - 2 + BA_PARM BaParm; /*0 - 2 */ USHORT TimeOutValue; } FRAME_ADDBA_RSP, *PFRAME_ADDBA_RSP; @@ -627,7 +627,7 @@ typedef struct PACKED _FRAME_DELBA_REQ { USHORT ReasonCode; } FRAME_DELBA_REQ, *PFRAME_DELBA_REQ; -//7.2.1.7 +/*7.2.1.7 */ typedef struct PACKED _FRAME_BAR { FRAME_CONTROL FC; USHORT Duration; @@ -637,7 +637,7 @@ typedef struct PACKED _FRAME_BAR { BASEQ_CONTROL StartingSeq; } FRAME_BAR, *PFRAME_BAR; -//7.2.1.7 +/*7.2.1.7 */ typedef struct PACKED _FRAME_BA { FRAME_CONTROL FC; USHORT Duration; @@ -648,7 +648,7 @@ typedef struct PACKED _FRAME_BA { UCHAR bitmask[8]; } FRAME_BA, *PFRAME_BA; -// Radio Measuement Request Frame Format +/* Radio Measuement Request Frame Format */ typedef struct PACKED _FRAME_RM_REQ_ACTION { HEADER_802_11 Hdr; UCHAR Category; @@ -668,21 +668,21 @@ typedef struct PACKED { } HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE, *PHT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE; -// -// _Limit must be the 2**n - 1 -// _SEQ1 , _SEQ2 must be within 0 ~ _Limit -// +/* */ +/* _Limit must be the 2**n - 1 */ +/* _SEQ1 , _SEQ2 must be within 0 ~ _Limit */ +/* */ #define SEQ_STEPONE(_SEQ1, _SEQ2, _Limit) ((_SEQ1 == ((_SEQ2+1) & _Limit))) #define SEQ_SMALLER(_SEQ1, _SEQ2, _Limit) (((_SEQ1-_SEQ2) & ((_Limit+1)>>1))) #define SEQ_LARGER(_SEQ1, _SEQ2, _Limit) ((_SEQ1 != _SEQ2) && !(((_SEQ1-_SEQ2) & ((_Limit+1)>>1)))) #define SEQ_WITHIN_WIN(_SEQ1, _SEQ2, _WIN, _Limit) (SEQ_LARGER(_SEQ1, _SEQ2, _Limit) && \ SEQ_SMALLER(_SEQ1, ((_SEQ2+_WIN+1)&_Limit), _Limit)) -// -// Contention-free parameter (without ID and Length) -// +/* */ +/* Contention-free parameter (without ID and Length) */ +/* */ typedef struct PACKED { - BOOLEAN bValid; // 1: variable contains valid value + BOOLEAN bValid; /* 1: variable contains valid value */ UCHAR CfpCount; UCHAR CfpPeriod; USHORT CfpMaxDuration; @@ -690,39 +690,39 @@ typedef struct PACKED { } CF_PARM, *PCF_PARM; typedef struct _CIPHER_SUITE { - NDIS_802_11_ENCRYPTION_STATUS PairCipher; // Unicast cipher 1, this one has more secured cipher suite - NDIS_802_11_ENCRYPTION_STATUS PairCipherAux; // Unicast cipher 2 if AP announce two unicast cipher suite - NDIS_802_11_ENCRYPTION_STATUS GroupCipher; // Group cipher - USHORT RsnCapability; // RSN capability from beacon - BOOLEAN bMixMode; // Indicate Pair & Group cipher might be different + NDIS_802_11_ENCRYPTION_STATUS PairCipher; /* Unicast cipher 1, this one has more secured cipher suite */ + NDIS_802_11_ENCRYPTION_STATUS PairCipherAux; /* Unicast cipher 2 if AP announce two unicast cipher suite */ + NDIS_802_11_ENCRYPTION_STATUS GroupCipher; /* Group cipher */ + USHORT RsnCapability; /* RSN capability from beacon */ + BOOLEAN bMixMode; /* Indicate Pair & Group cipher might be different */ } CIPHER_SUITE, *PCIPHER_SUITE; -// EDCA configuration from AP's BEACON/ProbeRsp +/* EDCA configuration from AP's BEACON/ProbeRsp */ typedef struct { - BOOLEAN bValid; // 1: variable contains valid value - BOOLEAN bAdd; // 1: variable contains valid value + BOOLEAN bValid; /* 1: variable contains valid value */ + BOOLEAN bAdd; /* 1: variable contains valid value */ BOOLEAN bQAck; BOOLEAN bQueueRequest; BOOLEAN bTxopRequest; BOOLEAN bAPSDCapable; -// BOOLEAN bMoreDataAck; +/* BOOLEAN bMoreDataAck; */ UCHAR EdcaUpdateCount; - UCHAR Aifsn[4]; // 0:AC_BK, 1:AC_BE, 2:AC_VI, 3:AC_VO + UCHAR Aifsn[4]; /* 0:AC_BK, 1:AC_BE, 2:AC_VI, 3:AC_VO */ UCHAR Cwmin[4]; UCHAR Cwmax[4]; - USHORT Txop[4]; // in unit of 32-us - BOOLEAN bACM[4]; // 1: Admission Control of AC_BK is mandattory + USHORT Txop[4]; /* in unit of 32-us */ + BOOLEAN bACM[4]; /* 1: Admission Control of AC_BK is mandattory */ } EDCA_PARM, *PEDCA_PARM; -// QBSS LOAD information from QAP's BEACON/ProbeRsp +/* QBSS LOAD information from QAP's BEACON/ProbeRsp */ typedef struct { - BOOLEAN bValid; // 1: variable contains valid value + BOOLEAN bValid; /* 1: variable contains valid value */ USHORT StaNum; UCHAR ChannelUtilization; - USHORT RemainingAdmissionControl; // in unit of 32-us + USHORT RemainingAdmissionControl; /* in unit of 32-us */ } QBSS_LOAD_PARM, *PQBSS_LOAD_PARM; -// QBSS Info field in QSTA's assoc req +/* QBSS Info field in QSTA's assoc req */ typedef struct PACKED { UCHAR UAPSD_AC_VO:1; UCHAR UAPSD_AC_VI:1; @@ -733,21 +733,21 @@ typedef struct PACKED { UCHAR Rsv2:1; } QBSS_STA_INFO_PARM, *PQBSS_STA_INFO_PARM; -// QBSS Info field in QAP's Beacon/ProbeRsp +/* QBSS Info field in QAP's Beacon/ProbeRsp */ typedef struct PACKED { UCHAR ParamSetCount:4; UCHAR Rsv:3; UCHAR UAPSD:1; } QBSS_AP_INFO_PARM, *PQBSS_AP_INFO_PARM; -// QOS Capability reported in QAP's BEACON/ProbeRsp -// QOS Capability sent out in QSTA's AssociateReq/ReAssociateReq +/* QOS Capability reported in QAP's BEACON/ProbeRsp */ +/* QOS Capability sent out in QSTA's AssociateReq/ReAssociateReq */ typedef struct { - BOOLEAN bValid; // 1: variable contains valid value + BOOLEAN bValid; /* 1: variable contains valid value */ BOOLEAN bQAck; BOOLEAN bQueueRequest; BOOLEAN bTxopRequest; -// BOOLEAN bMoreDataAck; +/* BOOLEAN bMoreDataAck; */ UCHAR EdcaUpdateCount; } QOS_CAPABILITY_PARM, *PQOS_CAPABILITY_PARM; @@ -759,7 +759,7 @@ typedef struct { typedef struct { UCHAR Bssid[MAC_ADDR_LEN]; UCHAR Channel; - UCHAR CentralChannel; //Store the wide-band central channel for 40MHz. .used in 40MHz AP. Or this is the same as Channel. + UCHAR CentralChannel; /*Store the wide-band central channel for 40MHz. .used in 40MHz AP. Or this is the same as Channel. */ UCHAR BssType; USHORT AtimWin; USHORT BeaconPeriod; @@ -770,11 +770,11 @@ typedef struct { UCHAR ExtRateLen; HT_CAPABILITY_IE HtCapability; UCHAR HtCapabilityLen; - ADD_HT_INFO_IE AddHtInfo; // AP might use this additional ht info IE + ADD_HT_INFO_IE AddHtInfo; /* AP might use this additional ht info IE */ UCHAR AddHtInfoLen; UCHAR NewExtChanOffset; CHAR Rssi; - UCHAR Privacy; // Indicate security function ON/OFF. Don't mess up with auth mode. + UCHAR Privacy; /* Indicate security function ON/OFF. Don't mess up with auth mode. */ UCHAR Hidden; USHORT DtimPeriod; @@ -787,30 +787,30 @@ typedef struct { UCHAR SsidLen; CHAR Ssid[MAX_LEN_OF_SSID]; - ULONG LastBeaconRxTime; // OS's timestamp + ULONG LastBeaconRxTime; /* OS's timestamp */ BOOLEAN bSES; - // New for WPA2 - CIPHER_SUITE WPA; // AP announced WPA cipher suite - CIPHER_SUITE WPA2; // AP announced WPA2 cipher suite + /* New for WPA2 */ + CIPHER_SUITE WPA; /* AP announced WPA cipher suite */ + CIPHER_SUITE WPA2; /* AP announced WPA2 cipher suite */ - // New for microsoft WPA support + /* New for microsoft WPA support */ NDIS_802_11_FIXED_IEs FixIEs; - NDIS_802_11_AUTHENTICATION_MODE AuthModeAux; // Addition mode for WPA2 / WPA capable AP + NDIS_802_11_AUTHENTICATION_MODE AuthModeAux; /* Addition mode for WPA2 / WPA capable AP */ NDIS_802_11_AUTHENTICATION_MODE AuthMode; - NDIS_802_11_WEP_STATUS WepStatus; // Unicast Encryption Algorithm extract from VAR_IE - USHORT VarIELen; // Length of next VIE include EID & Length + NDIS_802_11_WEP_STATUS WepStatus; /* Unicast Encryption Algorithm extract from VAR_IE */ + USHORT VarIELen; /* Length of next VIE include EID & Length */ UCHAR VarIEs[MAX_VIE_LEN]; - // CCX Ckip information + /* CCX Ckip information */ UCHAR CkipFlag; - // CCX 2 TSF - UCHAR PTSF[4]; // Parent TSF - UCHAR TTSF[8]; // Target TSF + /* CCX 2 TSF */ + UCHAR PTSF[4]; /* Parent TSF */ + UCHAR TTSF[8]; /* Target TSF */ - // 802.11e d9, and WMM + /* 802.11e d9, and WMM */ EDCA_PARM EdcaParm; QOS_CAPABILITY_PARM QosCapability; QBSS_LOAD_PARM QbssLoad; @@ -857,12 +857,12 @@ typedef struct _STATE_MACHINE { STATE_MACHINE_FUNC *TransFunc; } STATE_MACHINE, *PSTATE_MACHINE; -// MLME AUX data structure that hold temporarliy settings during a connection attempt. -// Once this attemp succeeds, all settings will be copy to pAd->StaActive. -// A connection attempt (user set OID, roaming, CCX fast roaming,..) consists of -// several steps (JOIN, AUTH, ASSOC or REASSOC) and may fail at any step. We purposely -// separate this under-trial settings away from pAd->StaActive so that once -// this new attempt failed, driver can auto-recover back to the active settings. +/* MLME AUX data structure that hold temporarliy settings during a connection attempt. */ +/* Once this attemp succeeds, all settings will be copy to pAd->StaActive. */ +/* A connection attempt (user set OID, roaming, CCX fast roaming,..) consists of */ +/* several steps (JOIN, AUTH, ASSOC or REASSOC) and may fail at any step. We purposely */ +/* separate this under-trial settings away from pAd->StaActive so that once */ +/* this new attempt failed, driver can auto-recover back to the active settings. */ typedef struct _MLME_AUX { UCHAR BssType; UCHAR Ssid[MAX_LEN_OF_SSID]; @@ -881,28 +881,28 @@ typedef struct _MLME_AUX { USHORT CfpPeriod; USHORT AtimWin; - // Copy supported rate from desired AP's beacon. We are trying to match - // AP's supported and extended rate settings. + /* Copy supported rate from desired AP's beacon. We are trying to match */ + /* AP's supported and extended rate settings. */ UCHAR SupRate[MAX_LEN_OF_SUPPORTED_RATES]; UCHAR ExtRate[MAX_LEN_OF_SUPPORTED_RATES]; UCHAR SupRateLen; UCHAR ExtRateLen; HT_CAPABILITY_IE HtCapability; UCHAR HtCapabilityLen; - ADD_HT_INFO_IE AddHtInfo; // AP might use this additional ht info IE + ADD_HT_INFO_IE AddHtInfo; /* AP might use this additional ht info IE */ UCHAR NewExtChannelOffset; - //RT_HT_CAPABILITY SupportedHtPhy; + /*RT_HT_CAPABILITY SupportedHtPhy; */ - // new for QOS - QOS_CAPABILITY_PARM APQosCapability; // QOS capability of the current associated AP - EDCA_PARM APEdcaParm; // EDCA parameters of the current associated AP - QBSS_LOAD_PARM APQbssLoad; // QBSS load of the current associated AP + /* new for QOS */ + QOS_CAPABILITY_PARM APQosCapability; /* QOS capability of the current associated AP */ + EDCA_PARM APEdcaParm; /* EDCA parameters of the current associated AP */ + QBSS_LOAD_PARM APQbssLoad; /* QBSS load of the current associated AP */ - // new to keep Ralink specific feature + /* new to keep Ralink specific feature */ ULONG APRalinkIe; - BSS_TABLE SsidBssTab; // AP list for the same SSID - BSS_TABLE RoamTab; // AP list eligible for roaming + BSS_TABLE SsidBssTab; /* AP list for the same SSID */ + BSS_TABLE RoamTab; /* AP list eligible for roaming */ ULONG BssIdx; ULONG RoamIdx; @@ -914,7 +914,7 @@ typedef struct _MLME_AUX { } MLME_AUX, *PMLME_AUX; typedef struct _MLME_ADDBA_REQ_STRUCT { - UCHAR Wcid; // + UCHAR Wcid; /* */ UCHAR pAddr[MAC_ADDR_LEN]; UCHAR BaBufSize; USHORT TimeOutValue; @@ -924,13 +924,13 @@ typedef struct _MLME_ADDBA_REQ_STRUCT { } MLME_ADDBA_REQ_STRUCT, *PMLME_ADDBA_REQ_STRUCT; typedef struct _MLME_DELBA_REQ_STRUCT { - UCHAR Wcid; // + UCHAR Wcid; /* */ UCHAR Addr[MAC_ADDR_LEN]; UCHAR TID; UCHAR Initiator; } MLME_DELBA_REQ_STRUCT, *PMLME_DELBA_REQ_STRUCT; -// assoc struct is equal to reassoc +/* assoc struct is equal to reassoc */ typedef struct _MLME_ASSOC_REQ_STRUCT { UCHAR Addr[MAC_ADDR_LEN]; USHORT CapabilityInfo; @@ -991,62 +991,62 @@ typedef struct PACKED _RTMP_TX_RATE_SWIT UCHAR TrainDown; } RRTMP_TX_RATE_SWITCH, *PRTMP_TX_RATE_SWITCH; -// ========================== AP mlme.h =============================== -#define TBTT_PRELOAD_TIME 384 // usec. LomgPreamble + 24-byte at 1Mbps +/* ========================== AP mlme.h =============================== */ +#define TBTT_PRELOAD_TIME 384 /* usec. LomgPreamble + 24-byte at 1Mbps */ #define DEFAULT_DTIM_PERIOD 1 -#define MAC_TABLE_AGEOUT_TIME 300 // unit: sec -#define MAC_TABLE_ASSOC_TIMEOUT 5 // unit: sec +#define MAC_TABLE_AGEOUT_TIME 300 /* unit: sec */ +#define MAC_TABLE_ASSOC_TIMEOUT 5 /* unit: sec */ #define MAC_TABLE_FULL(Tab) ((Tab).size == MAX_LEN_OF_MAC_TABLE) -// AP shall drop the sta if contine Tx fail count reach it. -#define MAC_ENTRY_LIFE_CHECK_CNT 20 // packet cnt. +/* AP shall drop the sta if contine Tx fail count reach it. */ +#define MAC_ENTRY_LIFE_CHECK_CNT 20 /* packet cnt. */ -// Value domain of pMacEntry->Sst +/* Value domain of pMacEntry->Sst */ typedef enum _Sst { - SST_NOT_AUTH, // 0: equivalent to IEEE 802.11/1999 state 1 - SST_AUTH, // 1: equivalent to IEEE 802.11/1999 state 2 - SST_ASSOC // 2: equivalent to IEEE 802.11/1999 state 3 + SST_NOT_AUTH, /* 0: equivalent to IEEE 802.11/1999 state 1 */ + SST_AUTH, /* 1: equivalent to IEEE 802.11/1999 state 2 */ + SST_ASSOC /* 2: equivalent to IEEE 802.11/1999 state 3 */ } SST; -// value domain of pMacEntry->AuthState +/* value domain of pMacEntry->AuthState */ typedef enum _AuthState { AS_NOT_AUTH, - AS_AUTH_OPEN, // STA has been authenticated using OPEN SYSTEM - AS_AUTH_KEY, // STA has been authenticated using SHARED KEY - AS_AUTHENTICATING // STA is waiting for AUTH seq#3 using SHARED KEY + AS_AUTH_OPEN, /* STA has been authenticated using OPEN SYSTEM */ + AS_AUTH_KEY, /* STA has been authenticated using SHARED KEY */ + AS_AUTHENTICATING /* STA is waiting for AUTH seq#3 using SHARED KEY */ } AUTH_STATE; -//for-wpa value domain of pMacEntry->WpaState 802.1i D3 p.114 +/*for-wpa value domain of pMacEntry->WpaState 802.1i D3 p.114 */ typedef enum _ApWpaState { - AS_NOTUSE, // 0 - AS_DISCONNECT, // 1 - AS_DISCONNECTED, // 2 - AS_INITIALIZE, // 3 - AS_AUTHENTICATION, // 4 - AS_AUTHENTICATION2, // 5 - AS_INITPMK, // 6 - AS_INITPSK, // 7 - AS_PTKSTART, // 8 - AS_PTKINIT_NEGOTIATING, // 9 - AS_PTKINITDONE, // 10 - AS_UPDATEKEYS, // 11 - AS_INTEGRITY_FAILURE, // 12 - AS_KEYUPDATE, // 13 + AS_NOTUSE, /* 0 */ + AS_DISCONNECT, /* 1 */ + AS_DISCONNECTED, /* 2 */ + AS_INITIALIZE, /* 3 */ + AS_AUTHENTICATION, /* 4 */ + AS_AUTHENTICATION2, /* 5 */ + AS_INITPMK, /* 6 */ + AS_INITPSK, /* 7 */ + AS_PTKSTART, /* 8 */ + AS_PTKINIT_NEGOTIATING, /* 9 */ + AS_PTKINITDONE, /* 10 */ + AS_UPDATEKEYS, /* 11 */ + AS_INTEGRITY_FAILURE, /* 12 */ + AS_KEYUPDATE, /* 13 */ } AP_WPA_STATE; -// for-wpa value domain of pMacEntry->WpaState 802.1i D3 p.114 +/* for-wpa value domain of pMacEntry->WpaState 802.1i D3 p.114 */ typedef enum _GTKState { REKEY_NEGOTIATING, REKEY_ESTABLISHED, KEYERROR, } GTK_STATE; -// for-wpa value domain of pMacEntry->WpaState 802.1i D3 p.114 +/* for-wpa value domain of pMacEntry->WpaState 802.1i D3 p.114 */ typedef enum _WpaGTKState { SETKEYS, SETKEYS_DONE, } WPA_GTK_STATE; -// ====================== end of AP mlme.h ============================ +/* ====================== end of AP mlme.h ============================ */ -#endif // MLME_H__ +#endif /* MLME_H__ */ Index: b/drivers/staging/rt2860/oid.h =================================================================== --- a/drivers/staging/rt2860/oid.h +++ b/drivers/staging/rt2860/oid.h @@ -37,7 +37,7 @@ #ifndef _OID_H_ #define _OID_H_ -//#include +/*#include */ #ifndef TRUE #define TRUE 1 @@ -45,9 +45,9 @@ #ifndef FALSE #define FALSE 0 #endif -// -// IEEE 802.11 Structures and definitions -// +/* */ +/* IEEE 802.11 Structures and definitions */ +/* */ #define MAX_TX_POWER_LEVEL 100 /* mW */ #define MAX_RSSI_TRIGGER -10 /* dBm */ #define MIN_RSSI_TRIGGER -200 /* dBm */ @@ -55,19 +55,19 @@ #define MIN_FRAG_THRESHOLD 256 /* byte count */ #define MAX_RTS_THRESHOLD 2347 /* byte count */ -// new types for Media Specific Indications -// Extension channel offset +/* new types for Media Specific Indications */ +/* Extension channel offset */ #define EXTCHA_NONE 0 #define EXTCHA_ABOVE 0x1 #define EXTCHA_BELOW 0x3 -// BW +/* BW */ #define BAND_WIDTH_20 0 #define BAND_WIDTH_40 1 #define BAND_WIDTH_BOTH 2 -#define BAND_WIDTH_10 3 // 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field. -// SHORTGI -#define GAP_INTERVAL_400 1 // only support in HT mode +#define BAND_WIDTH_10 3 /* 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field. */ +/* SHORTGI */ +#define GAP_INTERVAL_400 1 /* only support in HT mode */ #define GAP_INTERVAL_800 0 #define GAP_INTERVAL_BOTH 2 @@ -78,12 +78,12 @@ #define NDIS_802_11_LENGTH_RATES 8 #define NDIS_802_11_LENGTH_RATES_EX 16 #define MAC_ADDR_LENGTH 6 -//#define MAX_NUM_OF_CHS 49 // 14 channels @2.4G + 12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL terminationc -#define MAX_NUM_OF_CHS 54 // 14 channels @2.4G + 12@UNII(lower/middle) + 16@HiperLAN2 + 11@UNII(upper) + 0 @Japan + 1 as NULL termination -#define MAX_NUMBER_OF_EVENT 10 // entry # in EVENT table -#define MAX_NUMBER_OF_MAC 32 // if MAX_MBSSID_NUM is 8, this value can't be larger than 211 +/*#define MAX_NUM_OF_CHS 49 // 14 channels @2.4G + 12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL terminationc */ +#define MAX_NUM_OF_CHS 54 /* 14 channels @2.4G + 12@UNII(lower/middle) + 16@HiperLAN2 + 11@UNII(upper) + 0 @Japan + 1 as NULL termination */ +#define MAX_NUMBER_OF_EVENT 10 /* entry # in EVENT table */ +#define MAX_NUMBER_OF_MAC 32 /* if MAX_MBSSID_NUM is 8, this value can't be larger than 211 */ #define MAX_NUMBER_OF_ACL 64 -#define MAX_LENGTH_OF_SUPPORT_RATES 12 // 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54 +#define MAX_LENGTH_OF_SUPPORT_RATES 12 /* 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54 */ #define MAX_NUMBER_OF_DLS_ENTRY 4 #define RT_QUERY_SIGNAL_CONTEXT 0x0402 @@ -91,9 +91,9 @@ #define RT_SET_APD_PID 0x0405 #define RT_SET_DEL_MAC_ENTRY 0x0406 #define RT_QUERY_EVENT_TABLE 0x0407 -// -// IEEE 802.11 OIDs -// +/* */ +/* IEEE 802.11 OIDs */ +/* */ #define OID_GET_SET_TOGGLE 0x8000 #define OID_GET_SET_FROM_UI 0x4000 @@ -119,7 +119,7 @@ #define RT_OID_802_11_QUERY_LAST_RX_RATE 0x0613 #define RT_OID_802_11_TX_POWER_LEVEL_1 0x0614 #define RT_OID_802_11_QUERY_PIDVID 0x0615 -//for WPA_SUPPLICANT_SUPPORT +/*for WPA_SUPPLICANT_SUPPORT */ #define OID_SET_COUNTERMEASURES 0x0616 #define RT_OID_WPA_SUPPLICANT_SUPPORT 0x0621 #define RT_OID_WE_VERSION_COMPILED 0x0622 @@ -132,7 +132,7 @@ typedef enum _NDIS_802_11_STATUS_TYPE { Ndis802_11StatusType_Authentication, Ndis802_11StatusType_MediaStreamMode, Ndis802_11StatusType_PMKID_CandidateList, - Ndis802_11StatusTypeMax // not a real type, defined as an upper bound + Ndis802_11StatusTypeMax /* not a real type, defined as an upper bound */ } NDIS_802_11_STATUS_TYPE, *PNDIS_802_11_STATUS_TYPE; typedef UCHAR NDIS_802_11_MAC_ADDRESS[6]; @@ -141,7 +141,7 @@ typedef struct _NDIS_802_11_STATUS_INDIC NDIS_802_11_STATUS_TYPE StatusType; } NDIS_802_11_STATUS_INDICATION, *PNDIS_802_11_STATUS_INDICATION; -// mask for authentication/integrity fields +/* mask for authentication/integrity fields */ #define NDIS_802_11_AUTH_REQUEST_AUTH_FIELDS 0x0f #define NDIS_802_11_AUTH_REQUEST_REAUTH 0x01 @@ -150,27 +150,27 @@ typedef struct _NDIS_802_11_STATUS_INDIC #define NDIS_802_11_AUTH_REQUEST_GROUP_ERROR 0x0E typedef struct _NDIS_802_11_AUTHENTICATION_REQUEST { - ULONG Length; // Length of structure + ULONG Length; /* Length of structure */ NDIS_802_11_MAC_ADDRESS Bssid; ULONG Flags; } NDIS_802_11_AUTHENTICATION_REQUEST, *PNDIS_802_11_AUTHENTICATION_REQUEST; -//Added new types for PMKID Candidate lists. +/*Added new types for PMKID Candidate lists. */ typedef struct _PMKID_CANDIDATE { NDIS_802_11_MAC_ADDRESS BSSID; ULONG Flags; } PMKID_CANDIDATE, *PPMKID_CANDIDATE; typedef struct _NDIS_802_11_PMKID_CANDIDATE_LIST { - ULONG Version; // Version of the structure - ULONG NumCandidates; // No. of pmkid candidates + ULONG Version; /* Version of the structure */ + ULONG NumCandidates; /* No. of pmkid candidates */ PMKID_CANDIDATE CandidateList[1]; } NDIS_802_11_PMKID_CANDIDATE_LIST, *PNDIS_802_11_PMKID_CANDIDATE_LIST; -//Flags for PMKID Candidate list structure +/*Flags for PMKID Candidate list structure */ #define NDIS_802_11_PMKID_CANDIDATE_PREAUTH_ENABLED 0x01 -// Added new types for OFDM 5G and 2.4G +/* Added new types for OFDM 5G and 2.4G */ typedef enum _NDIS_802_11_NETWORK_TYPE { Ndis802_11FH, Ndis802_11DS, @@ -179,11 +179,11 @@ typedef enum _NDIS_802_11_NETWORK_TYPE { Ndis802_11Automode, Ndis802_11OFDM5_N, Ndis802_11OFDM24_N, - Ndis802_11NetworkTypeMax // not a real type, defined as an upper bound + Ndis802_11NetworkTypeMax /* not a real type, defined as an upper bound */ } NDIS_802_11_NETWORK_TYPE, *PNDIS_802_11_NETWORK_TYPE; typedef struct _NDIS_802_11_NETWORK_TYPE_LIST { - UINT NumberOfItems; // in list below, at least 1 + UINT NumberOfItems; /* in list below, at least 1 */ NDIS_802_11_NETWORK_TYPE NetworkType[1]; } NDIS_802_11_NETWORK_TYPE_LIST, *PNDIS_802_11_NETWORK_TYPE_LIST; @@ -192,33 +192,33 @@ typedef enum _NDIS_802_11_POWER_MODE { Ndis802_11PowerModeMAX_PSP, Ndis802_11PowerModeFast_PSP, Ndis802_11PowerModeLegacy_PSP, - Ndis802_11PowerModeMax // not a real mode, defined as an upper bound + Ndis802_11PowerModeMax /* not a real mode, defined as an upper bound */ } NDIS_802_11_POWER_MODE, *PNDIS_802_11_POWER_MODE; -typedef ULONG NDIS_802_11_TX_POWER_LEVEL; // in milliwatts +typedef ULONG NDIS_802_11_TX_POWER_LEVEL; /* in milliwatts */ -// -// Received Signal Strength Indication -// -typedef LONG NDIS_802_11_RSSI; // in dBm +/* */ +/* Received Signal Strength Indication */ +/* */ +typedef LONG NDIS_802_11_RSSI; /* in dBm */ typedef struct _NDIS_802_11_CONFIGURATION_FH { - ULONG Length; // Length of structure - ULONG HopPattern; // As defined by 802.11, MSB set - ULONG HopSet; // to one if non-802.11 - ULONG DwellTime; // units are Kusec + ULONG Length; /* Length of structure */ + ULONG HopPattern; /* As defined by 802.11, MSB set */ + ULONG HopSet; /* to one if non-802.11 */ + ULONG DwellTime; /* units are Kusec */ } NDIS_802_11_CONFIGURATION_FH, *PNDIS_802_11_CONFIGURATION_FH; typedef struct _NDIS_802_11_CONFIGURATION { - ULONG Length; // Length of structure - ULONG BeaconPeriod; // units are Kusec - ULONG ATIMWindow; // units are Kusec - ULONG DSConfig; // Frequency, units are kHz + ULONG Length; /* Length of structure */ + ULONG BeaconPeriod; /* units are Kusec */ + ULONG ATIMWindow; /* units are Kusec */ + ULONG DSConfig; /* Frequency, units are kHz */ NDIS_802_11_CONFIGURATION_FH FHConfig; } NDIS_802_11_CONFIGURATION, *PNDIS_802_11_CONFIGURATION; typedef struct _NDIS_802_11_STATISTICS { - ULONG Length; // Length of structure + ULONG Length; /* Length of structure */ LARGE_INTEGER TransmittedFragmentCount; LARGE_INTEGER MulticastTransmittedFrameCount; LARGE_INTEGER FailedCount; @@ -245,7 +245,7 @@ typedef struct _NDIS_802_11_STATISTICS { typedef ULONG NDIS_802_11_KEY_INDEX; typedef ULONGLONG NDIS_802_11_KEY_RSC; -#define MAX_RADIUS_SRV_NUM 2 // 802.1x failover number +#define MAX_RADIUS_SRV_NUM 2 /* 802.1x failover number */ typedef struct PACKED _RADIUS_SRV_INFO { UINT32 radius_ip; @@ -257,16 +257,16 @@ typedef struct PACKED _RADIUS_SRV_INFO { typedef struct PACKED _RADIUS_KEY_INFO { UCHAR radius_srv_num; RADIUS_SRV_INFO radius_srv_info[MAX_RADIUS_SRV_NUM]; - UCHAR ieee8021xWEP; // dynamic WEP + UCHAR ieee8021xWEP; /* dynamic WEP */ UCHAR key_index; - UCHAR key_length; // length of key in bytes + UCHAR key_length; /* length of key in bytes */ UCHAR key_material[13]; } RADIUS_KEY_INFO, *PRADIUS_KEY_INFO; -// It's used by 802.1x daemon to require relative configuration +/* It's used by 802.1x daemon to require relative configuration */ typedef struct PACKED _RADIUS_CONF { - UINT32 Length; // Length of this structure - UCHAR mbss_num; // indicate multiple BSS number + UINT32 Length; /* Length of this structure */ + UCHAR mbss_num; /* indicate multiple BSS number */ UINT32 own_ip_addr; UINT32 retry_interval; UINT32 session_timeout_interval; @@ -277,34 +277,34 @@ typedef struct PACKED _RADIUS_CONF { RADIUS_KEY_INFO RadiusInfo[8]; } RADIUS_CONF, *PRADIUS_CONF; -// Key mapping keys require a BSSID +/* Key mapping keys require a BSSID */ typedef struct _NDIS_802_11_KEY { - UINT Length; // Length of this structure + UINT Length; /* Length of this structure */ UINT KeyIndex; - UINT KeyLength; // length of key in bytes + UINT KeyLength; /* length of key in bytes */ NDIS_802_11_MAC_ADDRESS BSSID; NDIS_802_11_KEY_RSC KeyRSC; - UCHAR KeyMaterial[1]; // variable length depending on above field + UCHAR KeyMaterial[1]; /* variable length depending on above field */ } NDIS_802_11_KEY, *PNDIS_802_11_KEY; typedef struct _NDIS_802_11_PASSPHRASE { - UINT KeyLength; // length of key in bytes + UINT KeyLength; /* length of key in bytes */ NDIS_802_11_MAC_ADDRESS BSSID; - UCHAR KeyMaterial[1]; // variable length depending on above field + UCHAR KeyMaterial[1]; /* variable length depending on above field */ } NDIS_802_11_PASSPHRASE, *PNDIS_802_11_PASSPHRASE; typedef struct _NDIS_802_11_REMOVE_KEY { - UINT Length; // Length of this structure + UINT Length; /* Length of this structure */ UINT KeyIndex; NDIS_802_11_MAC_ADDRESS BSSID; } NDIS_802_11_REMOVE_KEY, *PNDIS_802_11_REMOVE_KEY; typedef struct _NDIS_802_11_WEP { - UINT Length; // Length of this structure - UINT KeyIndex; // 0 is the per-client key, 1-N are the - // global keys - UINT KeyLength; // length of key in bytes - UCHAR KeyMaterial[1]; // variable length depending on above field + UINT Length; /* Length of this structure */ + UINT KeyIndex; /* 0 is the per-client key, 1-N are the */ + /* global keys */ + UINT KeyLength; /* length of key in bytes */ + UCHAR KeyMaterial[1]; /* variable length depending on above field */ } NDIS_802_11_WEP, *PNDIS_802_11_WEP; typedef enum _NDIS_802_11_NETWORK_INFRASTRUCTURE { @@ -312,10 +312,10 @@ typedef enum _NDIS_802_11_NETWORK_INFRAS Ndis802_11Infrastructure, Ndis802_11AutoUnknown, Ndis802_11Monitor, - Ndis802_11InfrastructureMax // Not a real value, defined as upper bound + Ndis802_11InfrastructureMax /* Not a real value, defined as upper bound */ } NDIS_802_11_NETWORK_INFRASTRUCTURE, *PNDIS_802_11_NETWORK_INFRASTRUCTURE; -// Add new authentication modes +/* Add new authentication modes */ typedef enum _NDIS_802_11_AUTHENTICATION_MODE { Ndis802_11AuthModeOpen, Ndis802_11AuthModeShared, @@ -327,25 +327,25 @@ typedef enum _NDIS_802_11_AUTHENTICATION Ndis802_11AuthModeWPA2PSK, Ndis802_11AuthModeWPA1WPA2, Ndis802_11AuthModeWPA1PSKWPA2PSK, - Ndis802_11AuthModeMax // Not a real mode, defined as upper bound + Ndis802_11AuthModeMax /* Not a real mode, defined as upper bound */ } NDIS_802_11_AUTHENTICATION_MODE, *PNDIS_802_11_AUTHENTICATION_MODE; -typedef UCHAR NDIS_802_11_RATES[NDIS_802_11_LENGTH_RATES]; // Set of 8 data rates -typedef UCHAR NDIS_802_11_RATES_EX[NDIS_802_11_LENGTH_RATES_EX]; // Set of 16 data rates +typedef UCHAR NDIS_802_11_RATES[NDIS_802_11_LENGTH_RATES]; /* Set of 8 data rates */ +typedef UCHAR NDIS_802_11_RATES_EX[NDIS_802_11_LENGTH_RATES_EX]; /* Set of 16 data rates */ typedef struct PACKED _NDIS_802_11_SSID { - UINT SsidLength; // length of SSID field below, in bytes; - // this can be zero. - UCHAR Ssid[NDIS_802_11_LENGTH_SSID]; // SSID information field + UINT SsidLength; /* length of SSID field below, in bytes; */ + /* this can be zero. */ + UCHAR Ssid[NDIS_802_11_LENGTH_SSID]; /* SSID information field */ } NDIS_802_11_SSID, *PNDIS_802_11_SSID; typedef struct PACKED _NDIS_WLAN_BSSID { - ULONG Length; // Length of this structure - NDIS_802_11_MAC_ADDRESS MacAddress; // BSSID + ULONG Length; /* Length of this structure */ + NDIS_802_11_MAC_ADDRESS MacAddress; /* BSSID */ UCHAR Reserved[2]; - NDIS_802_11_SSID Ssid; // SSID - ULONG Privacy; // WEP encryption requirement - NDIS_802_11_RSSI Rssi; // receive signal strength in dBm + NDIS_802_11_SSID Ssid; /* SSID */ + ULONG Privacy; /* WEP encryption requirement */ + NDIS_802_11_RSSI Rssi; /* receive signal strength in dBm */ NDIS_802_11_NETWORK_TYPE NetworkTypeInUse; NDIS_802_11_CONFIGURATION Configuration; NDIS_802_11_NETWORK_INFRASTRUCTURE InfrastructureMode; @@ -353,19 +353,19 @@ typedef struct PACKED _NDIS_WLAN_BSSID { } NDIS_WLAN_BSSID, *PNDIS_WLAN_BSSID; typedef struct PACKED _NDIS_802_11_BSSID_LIST { - UINT NumberOfItems; // in list below, at least 1 + UINT NumberOfItems; /* in list below, at least 1 */ NDIS_WLAN_BSSID Bssid[1]; } NDIS_802_11_BSSID_LIST, *PNDIS_802_11_BSSID_LIST; -// Added Capabilities, IELength and IEs for each BSSID +/* Added Capabilities, IELength and IEs for each BSSID */ typedef struct PACKED _NDIS_WLAN_BSSID_EX { - ULONG Length; // Length of this structure - NDIS_802_11_MAC_ADDRESS MacAddress; // BSSID + ULONG Length; /* Length of this structure */ + NDIS_802_11_MAC_ADDRESS MacAddress; /* BSSID */ UCHAR Reserved[2]; - NDIS_802_11_SSID Ssid; // SSID - UINT Privacy; // WEP encryption requirement - NDIS_802_11_RSSI Rssi; // receive signal - // strength in dBm + NDIS_802_11_SSID Ssid; /* SSID */ + UINT Privacy; /* WEP encryption requirement */ + NDIS_802_11_RSSI Rssi; /* receive signal */ + /* strength in dBm */ NDIS_802_11_NETWORK_TYPE NetworkTypeInUse; NDIS_802_11_CONFIGURATION Configuration; NDIS_802_11_NETWORK_INFRASTRUCTURE InfrastructureMode; @@ -375,7 +375,7 @@ typedef struct PACKED _NDIS_WLAN_BSSID_E } NDIS_WLAN_BSSID_EX, *PNDIS_WLAN_BSSID_EX; typedef struct PACKED _NDIS_802_11_BSSID_LIST_EX { - UINT NumberOfItems; // in list below, at least 1 + UINT NumberOfItems; /* in list below, at least 1 */ NDIS_WLAN_BSSID_EX Bssid[1]; } NDIS_802_11_BSSID_LIST_EX, *PNDIS_802_11_BSSID_LIST_EX; @@ -387,7 +387,7 @@ typedef struct PACKED _NDIS_802_11_FIXED typedef struct _NDIS_802_11_VARIABLE_IEs { UCHAR ElementID; - UCHAR Length; // Number of bytes in data field + UCHAR Length; /* Number of bytes in data field */ UCHAR data[1]; } NDIS_802_11_VARIABLE_IEs, *PNDIS_802_11_VARIABLE_IEs; @@ -402,8 +402,8 @@ typedef enum _NDIS_802_11_PRIVACY_FILTER Ndis802_11PrivFilter8021xWEP } NDIS_802_11_PRIVACY_FILTER, *PNDIS_802_11_PRIVACY_FILTER; -// Added new encryption types -// Also aliased typedef to new name +/* Added new encryption types */ +/* Also aliased typedef to new name */ typedef enum _NDIS_802_11_WEP_STATUS { Ndis802_11WEPEnabled, Ndis802_11Encryption1Enabled = Ndis802_11WEPEnabled, @@ -417,7 +417,7 @@ typedef enum _NDIS_802_11_WEP_STATUS { Ndis802_11Encryption2KeyAbsent, Ndis802_11Encryption3Enabled, Ndis802_11Encryption3KeyAbsent, - Ndis802_11Encryption4Enabled, // TKIP or AES mix + Ndis802_11Encryption4Enabled, /* TKIP or AES mix */ Ndis802_11Encryption4KeyAbsent, Ndis802_11GroupWEP40Enabled, Ndis802_11GroupWEP104Enabled, @@ -465,13 +465,13 @@ typedef struct _NDIS_802_11_AUTHENTICATI NDIS_802_11_AUTHENTICATION_REQUEST Request[1]; } NDIS_802_11_AUTHENTICATION_EVENT, *PNDIS_802_11_AUTHENTICATION_EVENT; -// 802.11 Media stream constraints, associated with OID_802_11_MEDIA_STREAM_MODE +/* 802.11 Media stream constraints, associated with OID_802_11_MEDIA_STREAM_MODE */ typedef enum _NDIS_802_11_MEDIA_STREAM_MODE { Ndis802_11MediaStreamOff, Ndis802_11MediaStreamOn, } NDIS_802_11_MEDIA_STREAM_MODE, *PNDIS_802_11_MEDIA_STREAM_MODE; -// PMKID Structures +/* PMKID Structures */ typedef UCHAR NDIS_802_11_PMKID_VALUE[16]; typedef struct _BSSID_INFO { @@ -500,14 +500,14 @@ typedef struct _NDIS_802_11_CAPABILITY { AuthenticationEncryptionSupported[1]; } NDIS_802_11_CAPABILITY, *PNDIS_802_11_CAPABILITY; -#define RT_PRIV_IOCTL (SIOCIWFIRSTPRIV + 0x01) // Sync. with AP for wsc upnp daemon +#define RT_PRIV_IOCTL (SIOCIWFIRSTPRIV + 0x01) /* Sync. with AP for wsc upnp daemon */ #define RTPRIV_IOCTL_SET (SIOCIWFIRSTPRIV + 0x02) #define RTPRIV_IOCTL_STATISTICS (SIOCIWFIRSTPRIV + 0x09) #define RTPRIV_IOCTL_ADD_PMKID_CACHE (SIOCIWFIRSTPRIV + 0x0A) #define RTPRIV_IOCTL_RADIUS_DATA (SIOCIWFIRSTPRIV + 0x0C) #define RTPRIV_IOCTL_GSITESURVEY (SIOCIWFIRSTPRIV + 0x0D) -#define RT_PRIV_IOCTL_EXT (SIOCIWFIRSTPRIV + 0x0E) // Sync. with RT61 (for wpa_supplicant) +#define RT_PRIV_IOCTL_EXT (SIOCIWFIRSTPRIV + 0x0E) /* Sync. with RT61 (for wpa_supplicant) */ #define RTPRIV_IOCTL_GET_MAC_TABLE (SIOCIWFIRSTPRIV + 0x0F) #define RTPRIV_IOCTL_SHOW (SIOCIWFIRSTPRIV + 0x11) @@ -519,7 +519,7 @@ enum { #ifdef RTMP_MAC_USB SHOW_RXBULK_INFO = 8, SHOW_TXBULK_INFO = 9, -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ RAIO_OFF = 10, RAIO_ON = 11, SHOW_CFG_VALUE = 20, @@ -531,19 +531,19 @@ enum { #define OID_802_11_GET_COUNTRY_CODE 0x0716 #define OID_802_11_GET_CHANNEL_GEOGRAPHY 0x0717 -#define RT_OID_WSC_SET_PASSPHRASE 0x0740 // passphrase for wpa(2)-psk +#define RT_OID_WSC_SET_PASSPHRASE 0x0740 /* passphrase for wpa(2)-psk */ #define RT_OID_WSC_DRIVER_AUTO_CONNECT 0x0741 #define RT_OID_WSC_QUERY_DEFAULT_PROFILE 0x0742 #define RT_OID_WSC_SET_CONN_BY_PROFILE_INDEX 0x0743 #define RT_OID_WSC_SET_ACTION 0x0744 #define RT_OID_WSC_SET_SSID 0x0745 #define RT_OID_WSC_SET_PIN_CODE 0x0746 -#define RT_OID_WSC_SET_MODE 0x0747 // PIN or PBC -#define RT_OID_WSC_SET_CONF_MODE 0x0748 // Enrollee or Registrar +#define RT_OID_WSC_SET_MODE 0x0747 /* PIN or PBC */ +#define RT_OID_WSC_SET_CONF_MODE 0x0748 /* Enrollee or Registrar */ #define RT_OID_WSC_SET_PROFILE 0x0749 #define RT_OID_WSC_CONFIG_STATUS 0x074F #define RT_OID_802_11_WSC_QUERY_PROFILE 0x0750 -// for consistency with RT61 +/* for consistency with RT61 */ #define RT_OID_WSC_QUERY_STATUS 0x0751 #define RT_OID_WSC_PIN_CODE 0x0752 #define RT_OID_WSC_UUID 0x0753 @@ -555,20 +555,20 @@ enum { #define RT_OID_WSC_SERIAL_NO 0x0759 #define RT_OID_WSC_MAC_ADDRESS 0x0760 -// New for MeetingHouse Api support +/* New for MeetingHouse Api support */ #define OID_MH_802_1X_SUPPORTED 0xFFEDC100 -// MIMO Tx parameter, ShortGI, MCS, STBC, etc. these are fields in TXWI. Don't change this definition!!! +/* MIMO Tx parameter, ShortGI, MCS, STBC, etc. these are fields in TXWI. Don't change this definition!!! */ typedef union _HTTRANSMIT_SETTING { struct { - USHORT MCS:7; // MCS - USHORT BW:1; //channel bandwidth 20MHz or 40 MHz + USHORT MCS:7; /* MCS */ + USHORT BW:1; /*channel bandwidth 20MHz or 40 MHz */ USHORT ShortGI:1; - USHORT STBC:2; //SPACE -// USHORT rsv:3; + USHORT STBC:2; /*SPACE */ +/* USHORT rsv:3; */ USHORT rsv:2; USHORT TxBF:1; - USHORT MODE:2; // Use definition MODE_xxx. + USHORT MODE:2; /* Use definition MODE_xxx. */ } field; USHORT word; } HTTRANSMIT_SETTING, *PHTTRANSMIT_SETTING; @@ -585,45 +585,45 @@ typedef enum _RT_802_11_PHY_MODE { PHY_11A, PHY_11ABG_MIXED, PHY_11G, - PHY_11ABGN_MIXED, // both band 5 - PHY_11N_2_4G, // 11n-only with 2.4G band 6 - PHY_11GN_MIXED, // 2.4G band 7 - PHY_11AN_MIXED, // 5G band 8 - PHY_11BGN_MIXED, // if check 802.11b. 9 - PHY_11AGN_MIXED, // if check 802.11b. 10 - PHY_11N_5G, // 11n-only with 5G band 11 + PHY_11ABGN_MIXED, /* both band 5 */ + PHY_11N_2_4G, /* 11n-only with 2.4G band 6 */ + PHY_11GN_MIXED, /* 2.4G band 7 */ + PHY_11AN_MIXED, /* 5G band 8 */ + PHY_11BGN_MIXED, /* if check 802.11b. 9 */ + PHY_11AGN_MIXED, /* if check 802.11b. 10 */ + PHY_11N_5G, /* 11n-only with 5G band 11 */ } RT_802_11_PHY_MODE; -// put all proprietery for-query objects here to reduce # of Query_OID +/* put all proprietery for-query objects here to reduce # of Query_OID */ typedef struct _RT_802_11_LINK_STATUS { - ULONG CurrTxRate; // in units of 0.5Mbps - ULONG ChannelQuality; // 0..100 % - ULONG TxByteCount; // both ok and fail - ULONG RxByteCount; // both ok and fail - ULONG CentralChannel; // 40MHz central channel number + ULONG CurrTxRate; /* in units of 0.5Mbps */ + ULONG ChannelQuality; /* 0..100 % */ + ULONG TxByteCount; /* both ok and fail */ + ULONG RxByteCount; /* both ok and fail */ + ULONG CentralChannel; /* 40MHz central channel number */ } RT_802_11_LINK_STATUS, *PRT_802_11_LINK_STATUS; typedef struct _RT_802_11_EVENT_LOG { - LARGE_INTEGER SystemTime; // timestammp via NdisGetCurrentSystemTime() + LARGE_INTEGER SystemTime; /* timestammp via NdisGetCurrentSystemTime() */ UCHAR Addr[MAC_ADDR_LENGTH]; - USHORT Event; // EVENT_xxx + USHORT Event; /* EVENT_xxx */ } RT_802_11_EVENT_LOG, *PRT_802_11_EVENT_LOG; typedef struct _RT_802_11_EVENT_TABLE { ULONG Num; - ULONG Rsv; // to align Log[] at LARGE_INEGER boundary + ULONG Rsv; /* to align Log[] at LARGE_INEGER boundary */ RT_802_11_EVENT_LOG Log[MAX_NUMBER_OF_EVENT]; } RT_802_11_EVENT_TABLE, PRT_802_11_EVENT_TABLE; -// MIMO Tx parameter, ShortGI, MCS, STBC, etc. these are fields in TXWI. Don't change this definition!!! +/* MIMO Tx parameter, ShortGI, MCS, STBC, etc. these are fields in TXWI. Don't change this definition!!! */ typedef union _MACHTTRANSMIT_SETTING { struct { - USHORT MCS:7; // MCS - USHORT BW:1; //channel bandwidth 20MHz or 40 MHz + USHORT MCS:7; /* MCS */ + USHORT BW:1; /*channel bandwidth 20MHz or 40 MHz */ USHORT ShortGI:1; - USHORT STBC:2; //SPACE + USHORT STBC:2; /*SPACE */ USHORT rsv:3; - USHORT MODE:2; // Use definition MODE_xxx. + USHORT MODE:2; /* Use definition MODE_xxx. */ } field; USHORT word; } MACHTTRANSMIT_SETTING, *PMACHTTRANSMIT_SETTING; @@ -631,8 +631,8 @@ typedef union _MACHTTRANSMIT_SETTING { typedef struct _RT_802_11_MAC_ENTRY { UCHAR Addr[MAC_ADDR_LENGTH]; UCHAR Aid; - UCHAR Psm; // 0:PWR_ACTIVE, 1:PWR_SAVE - UCHAR MimoPs; // 0:MMPS_STATIC, 1:MMPS_DYNAMIC, 3:MMPS_Enabled + UCHAR Psm; /* 0:PWR_ACTIVE, 1:PWR_SAVE */ + UCHAR MimoPs; /* 0:MMPS_STATIC, 1:MMPS_DYNAMIC, 3:MMPS_Enabled */ CHAR AvgRssi0; CHAR AvgRssi1; CHAR AvgRssi2; @@ -645,48 +645,48 @@ typedef struct _RT_802_11_MAC_TABLE { RT_802_11_MAC_ENTRY Entry[MAX_NUMBER_OF_MAC]; } RT_802_11_MAC_TABLE, *PRT_802_11_MAC_TABLE; -// structure for query/set hardware register - MAC, BBP, RF register +/* structure for query/set hardware register - MAC, BBP, RF register */ typedef struct _RT_802_11_HARDWARE_REGISTER { - ULONG HardwareType; // 0:MAC, 1:BBP, 2:RF register, 3:EEPROM - ULONG Offset; // Q/S register offset addr - ULONG Data; // R/W data buffer + ULONG HardwareType; /* 0:MAC, 1:BBP, 2:RF register, 3:EEPROM */ + ULONG Offset; /* Q/S register offset addr */ + ULONG Data; /* R/W data buffer */ } RT_802_11_HARDWARE_REGISTER, *PRT_802_11_HARDWARE_REGISTER; typedef struct _RT_802_11_AP_CONFIG { - ULONG EnableTxBurst; // 0-disable, 1-enable - ULONG EnableTurboRate; // 0-disable, 1-enable 72/100mbps turbo rate - ULONG IsolateInterStaTraffic; // 0-disable, 1-enable isolation - ULONG HideSsid; // 0-disable, 1-enable hiding - ULONG UseBGProtection; // 0-AUTO, 1-always ON, 2-always OFF - ULONG UseShortSlotTime; // 0-no use, 1-use 9-us short slot time - ULONG Rsv1; // must be 0 - ULONG SystemErrorBitmap; // ignore upon SET, return system error upon QUERY + ULONG EnableTxBurst; /* 0-disable, 1-enable */ + ULONG EnableTurboRate; /* 0-disable, 1-enable 72/100mbps turbo rate */ + ULONG IsolateInterStaTraffic; /* 0-disable, 1-enable isolation */ + ULONG HideSsid; /* 0-disable, 1-enable hiding */ + ULONG UseBGProtection; /* 0-AUTO, 1-always ON, 2-always OFF */ + ULONG UseShortSlotTime; /* 0-no use, 1-use 9-us short slot time */ + ULONG Rsv1; /* must be 0 */ + ULONG SystemErrorBitmap; /* ignore upon SET, return system error upon QUERY */ } RT_802_11_AP_CONFIG, *PRT_802_11_AP_CONFIG; -// structure to query/set STA_CONFIG +/* structure to query/set STA_CONFIG */ typedef struct _RT_802_11_STA_CONFIG { - ULONG EnableTxBurst; // 0-disable, 1-enable - ULONG EnableTurboRate; // 0-disable, 1-enable 72/100mbps turbo rate - ULONG UseBGProtection; // 0-AUTO, 1-always ON, 2-always OFF - ULONG UseShortSlotTime; // 0-no use, 1-use 9-us short slot time when applicable - ULONG AdhocMode; // 0-11b rates only (WIFI spec), 1 - b/g mixed, 2 - g only - ULONG HwRadioStatus; // 0-OFF, 1-ON, default is 1, Read-Only - ULONG Rsv1; // must be 0 - ULONG SystemErrorBitmap; // ignore upon SET, return system error upon QUERY + ULONG EnableTxBurst; /* 0-disable, 1-enable */ + ULONG EnableTurboRate; /* 0-disable, 1-enable 72/100mbps turbo rate */ + ULONG UseBGProtection; /* 0-AUTO, 1-always ON, 2-always OFF */ + ULONG UseShortSlotTime; /* 0-no use, 1-use 9-us short slot time when applicable */ + ULONG AdhocMode; /* 0-11b rates only (WIFI spec), 1 - b/g mixed, 2 - g only */ + ULONG HwRadioStatus; /* 0-OFF, 1-ON, default is 1, Read-Only */ + ULONG Rsv1; /* must be 0 */ + ULONG SystemErrorBitmap; /* ignore upon SET, return system error upon QUERY */ } RT_802_11_STA_CONFIG, *PRT_802_11_STA_CONFIG; -// -// For OID Query or Set about BA structure -// +/* */ +/* For OID Query or Set about BA structure */ +/* */ typedef struct _OID_BACAP_STRUC { UCHAR RxBAWinLimit; UCHAR TxBAWinLimit; - UCHAR Policy; // 0: DELAY_BA 1:IMMED_BA (//BA Policy subfiled value in ADDBA frame) 2:BA-not use. other value invalid - UCHAR MpduDensity; // 0: DELAY_BA 1:IMMED_BA (//BA Policy subfiled value in ADDBA frame) 2:BA-not use. other value invalid - UCHAR AmsduEnable; //Enable AMSDU transmisstion - UCHAR AmsduSize; // 0:3839, 1:7935 bytes. UINT MSDUSizeToBytes[] = { 3839, 7935}; - UCHAR MMPSmode; // MIMO power save more, 0:static, 1:dynamic, 2:rsv, 3:mimo enable - BOOLEAN AutoBA; // Auto BA will automatically + UCHAR Policy; /* 0: DELAY_BA 1:IMMED_BA (//BA Policy subfiled value in ADDBA frame) 2:BA-not use. other value invalid */ + UCHAR MpduDensity; /* 0: DELAY_BA 1:IMMED_BA (//BA Policy subfiled value in ADDBA frame) 2:BA-not use. other value invalid */ + UCHAR AmsduEnable; /*Enable AMSDU transmisstion */ + UCHAR AmsduSize; /* 0:3839, 1:7935 bytes. UINT MSDUSizeToBytes[] = { 3839, 7935}; */ + UCHAR MMPSmode; /* MIMO power save more, 0:static, 1:dynamic, 2:rsv, 3:mimo enable */ + BOOLEAN AutoBA; /* Auto BA will automatically */ } OID_BACAP_STRUC, *POID_BACAP_STRUC; typedef struct _RT_802_11_ACL_ENTRY { @@ -695,7 +695,7 @@ typedef struct _RT_802_11_ACL_ENTRY { } RT_802_11_ACL_ENTRY, *PRT_802_11_ACL_ENTRY; typedef struct PACKED _RT_802_11_ACL { - ULONG Policy; // 0-disable, 1-positive list, 2-negative list + ULONG Policy; /* 0-disable, 1-positive list, 2-negative list */ ULONG Num; RT_802_11_ACL_ENTRY Entry[MAX_NUMBER_OF_ACL]; } RT_802_11_ACL, *PRT_802_11_ACL; @@ -714,29 +714,29 @@ typedef struct _RT_802_11_TX_RATES_ { UCHAR ExtRate[MAX_LENGTH_OF_SUPPORT_RATES]; } RT_802_11_TX_RATES, *PRT_802_11_TX_RATES; -// Definition of extra information code -#define GENERAL_LINK_UP 0x0 // Link is Up -#define GENERAL_LINK_DOWN 0x1 // Link is Down -#define HW_RADIO_OFF 0x2 // Hardware radio off -#define SW_RADIO_OFF 0x3 // Software radio off -#define AUTH_FAIL 0x4 // Open authentication fail -#define AUTH_FAIL_KEYS 0x5 // Shared authentication fail -#define ASSOC_FAIL 0x6 // Association failed -#define EAP_MIC_FAILURE 0x7 // Deauthencation because MIC failure -#define EAP_4WAY_TIMEOUT 0x8 // Deauthencation on 4-way handshake timeout -#define EAP_GROUP_KEY_TIMEOUT 0x9 // Deauthencation on group key handshake timeout -#define EAP_SUCCESS 0xa // EAP succeed -#define DETECT_RADAR_SIGNAL 0xb // Radar signal occur in current channel -#define EXTRA_INFO_MAX 0xb // Indicate Last OID +/* Definition of extra information code */ +#define GENERAL_LINK_UP 0x0 /* Link is Up */ +#define GENERAL_LINK_DOWN 0x1 /* Link is Down */ +#define HW_RADIO_OFF 0x2 /* Hardware radio off */ +#define SW_RADIO_OFF 0x3 /* Software radio off */ +#define AUTH_FAIL 0x4 /* Open authentication fail */ +#define AUTH_FAIL_KEYS 0x5 /* Shared authentication fail */ +#define ASSOC_FAIL 0x6 /* Association failed */ +#define EAP_MIC_FAILURE 0x7 /* Deauthencation because MIC failure */ +#define EAP_4WAY_TIMEOUT 0x8 /* Deauthencation on 4-way handshake timeout */ +#define EAP_GROUP_KEY_TIMEOUT 0x9 /* Deauthencation on group key handshake timeout */ +#define EAP_SUCCESS 0xa /* EAP succeed */ +#define DETECT_RADAR_SIGNAL 0xb /* Radar signal occur in current channel */ +#define EXTRA_INFO_MAX 0xb /* Indicate Last OID */ #define EXTRA_INFO_CLEAR 0xffffffff -// This is OID setting structure. So only GF or MM as Mode. This is valid when our wirelss mode has 802.11n in use. +/* This is OID setting structure. So only GF or MM as Mode. This is valid when our wirelss mode has 802.11n in use. */ typedef struct { - RT_802_11_PHY_MODE PhyMode; // + RT_802_11_PHY_MODE PhyMode; /* */ UCHAR TransmitNo; - UCHAR HtMode; //HTMODE_GF or HTMODE_MM - UCHAR ExtOffset; //extension channel above or below + UCHAR HtMode; /*HTMODE_GF or HTMODE_MM */ + UCHAR ExtOffset; /*extension channel above or below */ UCHAR MCS; UCHAR BW; UCHAR STBC; @@ -753,27 +753,27 @@ typedef enum _RT_802_11_D_CLIENT_MODE { } RT_802_11_D_CLIENT_MODE, *PRT_802_11_D_CLIENT_MODE; typedef struct _RT_CHANNEL_LIST_INFO { - UCHAR ChannelList[MAX_NUM_OF_CHS]; // list all supported channels for site survey - UCHAR ChannelListNum; // number of channel in ChannelList[] + UCHAR ChannelList[MAX_NUM_OF_CHS]; /* list all supported channels for site survey */ + UCHAR ChannelListNum; /* number of channel in ChannelList[] */ } RT_CHANNEL_LIST_INFO, *PRT_CHANNEL_LIST_INFO; -// WSC configured credential +/* WSC configured credential */ typedef struct _WSC_CREDENTIAL { - NDIS_802_11_SSID SSID; // mandatory - USHORT AuthType; // mandatory, 1: open, 2: wpa-psk, 4: shared, 8:wpa, 0x10: wpa2, 0x20: wpa2-psk - USHORT EncrType; // mandatory, 1: none, 2: wep, 4: tkip, 8: aes - UCHAR Key[64]; // mandatory, Maximum 64 byte + NDIS_802_11_SSID SSID; /* mandatory */ + USHORT AuthType; /* mandatory, 1: open, 2: wpa-psk, 4: shared, 8:wpa, 0x10: wpa2, 0x20: wpa2-psk */ + USHORT EncrType; /* mandatory, 1: none, 2: wep, 4: tkip, 8: aes */ + UCHAR Key[64]; /* mandatory, Maximum 64 byte */ USHORT KeyLength; - UCHAR MacAddr[6]; // mandatory, AP MAC address - UCHAR KeyIndex; // optional, default is 1 - UCHAR Rsvd[3]; // Make alignment + UCHAR MacAddr[6]; /* mandatory, AP MAC address */ + UCHAR KeyIndex; /* optional, default is 1 */ + UCHAR Rsvd[3]; /* Make alignment */ } WSC_CREDENTIAL, *PWSC_CREDENTIAL; -// WSC configured profiles +/* WSC configured profiles */ typedef struct _WSC_PROFILE { UINT ProfileCnt; - UINT ApplyProfileIdx; // add by johnli, fix WPS test plan 5.1.1 - WSC_CREDENTIAL Profile[8]; // Support up to 8 profiles + UINT ApplyProfileIdx; /* add by johnli, fix WPS test plan 5.1.1 */ + WSC_CREDENTIAL Profile[8]; /* Support up to 8 profiles */ } WSC_PROFILE, *PWSC_PROFILE; -#endif // _OID_H_ +#endif /* _OID_H_ */ Index: b/drivers/staging/rt2860/rt_config.h =================================================================== --- a/drivers/staging/rt2860/rt_config.h +++ b/drivers/staging/rt2860/rt_config.h @@ -66,6 +66,6 @@ #ifdef IGMP_SNOOP_SUPPORT #include "igmp_snoop.h" -#endif // IGMP_SNOOP_SUPPORT // +#endif /* IGMP_SNOOP_SUPPORT // */ -#endif // __RT_CONFIG_H__ +#endif /* __RT_CONFIG_H__ */ Index: b/drivers/staging/rt2860/rt_linux.h =================================================================== --- a/drivers/staging/rt2860/rt_linux.h +++ b/drivers/staging/rt2860/rt_linux.h @@ -60,20 +60,20 @@ #include -// load firmware +/* load firmware */ #define __KERNEL_SYSCALLS__ #include #include #include -#include // for get_unaligned() +#include /* for get_unaligned() */ #define KTHREAD_SUPPORT 1 -// RT2870 2.1.0.0 has it disabled +/* RT2870 2.1.0.0 has it disabled */ #ifdef KTHREAD_SUPPORT #include #include -#endif // KTHREAD_SUPPORT // +#endif /* KTHREAD_SUPPORT // */ /*********************************************************************************** * Profile related sections @@ -82,12 +82,12 @@ #ifdef RTMP_MAC_PCI #define STA_PROFILE_PATH "/etc/Wireless/RT2860STA/RT2860STA.dat" #define STA_DRIVER_VERSION "2.1.0.0" -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ #ifdef RTMP_MAC_USB #define STA_PROFILE_PATH "/etc/Wireless/RT2870STA/RT2870STA.dat" #define STA_DRIVER_VERSION "2.1.0.0" -// RT3070 version: 2.1.1.0 -#endif // RTMP_MAC_USB // +/* RT3070 version: 2.1.1.0 */ +#endif /* RTMP_MAC_USB // */ extern const struct iw_handler_def rt28xx_iw_handler_def; @@ -124,8 +124,8 @@ typedef int (*HARD_START_XMIT_FUNC) (str #define PCI_DEVICE(vend,dev) \ .vendor = (vend), .device = (dev), \ .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID -#endif // PCI_DEVICE // -#endif // RTMP_MAC_PCI // +#endif /* PCI_DEVICE // */ +#endif /* RTMP_MAC_PCI // */ #define RT_MOD_INC_USE_COUNT() \ if (!try_module_get(THIS_MODULE)) \ @@ -140,7 +140,7 @@ typedef int (*HARD_START_XMIT_FUNC) (str #define RTMP_DEC_REF(_A) 0 #define RTMP_GET_REF(_A) 0 -// This function will be called when query /proc +/* This function will be called when query /proc */ struct iw_statistics *rt28xx_get_wireless_stats(IN struct net_device *net_dev); /*********************************************************************************** @@ -176,13 +176,13 @@ struct iw_statistics *rt28xx_get_wireles /*********************************************************************************** * Ralink Specific network related constant definitions ***********************************************************************************/ -#define MIN_NET_DEVICE_FOR_AID 0x00 //0x00~0x3f -#define MIN_NET_DEVICE_FOR_MBSSID 0x00 //0x00,0x10,0x20,0x30 -#define MIN_NET_DEVICE_FOR_WDS 0x10 //0x40,0x50,0x60,0x70 +#define MIN_NET_DEVICE_FOR_AID 0x00 /*0x00~0x3f */ +#define MIN_NET_DEVICE_FOR_MBSSID 0x00 /*0x00,0x10,0x20,0x30 */ +#define MIN_NET_DEVICE_FOR_WDS 0x10 /*0x40,0x50,0x60,0x70 */ #define MIN_NET_DEVICE_FOR_APCLI 0x20 #define MIN_NET_DEVICE_FOR_MESH 0x30 #define MIN_NET_DEVICE_FOR_DLS 0x40 -#define NET_DEVICE_REAL_IDX_MASK 0x0f // for each operation mode, we maximum support 15 entities. +#define NET_DEVICE_REAL_IDX_MASK 0x0f /* for each operation mode, we maximum support 15 entities. */ #define NDIS_PACKET_TYPE_DIRECTED 0 #define NDIS_PACKET_TYPE_MULTICAST 1 @@ -217,9 +217,9 @@ struct os_lock { typedef spinlock_t NDIS_SPIN_LOCK; -// -// spin_lock enhanced for Nested spin lock -// +/* */ +/* spin_lock enhanced for Nested spin lock */ +/* */ #define NdisAllocateSpinLock(__lock) \ { \ spin_lock_init((spinlock_t *)(__lock)); \ @@ -238,7 +238,7 @@ typedef spinlock_t NDIS_SPIN_LOCK; spin_unlock_bh((spinlock_t *)(__lock)); \ } -// sample, use semaphore lock to replace IRQ lock, 2007/11/15 +/* sample, use semaphore lock to replace IRQ lock, 2007/11/15 */ #define RTMP_IRQ_LOCK(__lock, __irqflags) \ { \ __irqflags = 0; \ @@ -330,7 +330,7 @@ do { \ /*********************************************************************************** * OS Memory Access related data structure and definitions ***********************************************************************************/ -#define MEM_ALLOC_FLAG (GFP_ATOMIC) //(GFP_DMA | GFP_ATOMIC) +#define MEM_ALLOC_FLAG (GFP_ATOMIC) /*(GFP_DMA | GFP_ATOMIC) */ #define NdisMoveMemory(Destination, Source, Length) memmove(Destination, Source, Length) #define NdisCopyMemory(Destination, Source, Length) memcpy(Destination, Source, Length) @@ -405,10 +405,10 @@ struct os_cookie { struct pci_dev *parent_pci_dev; USHORT DeviceID; dma_addr_t pAd_pa; -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ #ifdef RTMP_MAC_USB struct usb_device *pUsb_Dev; -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ RTMP_NET_TASK_STRUCT rx_done_task; RTMP_NET_TASK_STRUCT mgmt_dma_done_task; @@ -419,14 +419,14 @@ struct os_cookie { RTMP_NET_TASK_STRUCT tbtt_task; #ifdef RTMP_MAC_PCI RTMP_NET_TASK_STRUCT fifo_statistic_full_task; -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ #ifdef RTMP_MAC_USB RTMP_NET_TASK_STRUCT null_frame_complete_task; RTMP_NET_TASK_STRUCT rts_frame_complete_task; RTMP_NET_TASK_STRUCT pspoll_frame_complete_task; -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ - unsigned long apd_pid; //802.1x daemon pid + unsigned long apd_pid; /*802.1x daemon pid */ INT ioctl_if_type; INT ioctl_if; }; @@ -501,12 +501,12 @@ void linux_pci_unmap_single(void *handle #define DEV_ALLOC_SKB(_length) \ dev_alloc_skb(_length) -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ #ifdef RTMP_MAC_USB #define PCI_MAP_SINGLE(_handle, _ptr, _size, _dir) (ULONG)0 #define PCI_UNMAP_SINGLE(_handle, _ptr, _size, _dir) -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ /* * ULONG @@ -545,7 +545,7 @@ void linux_pci_unmap_single(void *handle * Device Register I/O Access related definitions and data structures. **********************************************************************************/ #ifdef RTMP_MAC_PCI -//Patch for ASIC turst read/write bug, needs to remove after metel fix +/*Patch for ASIC turst read/write bug, needs to remove after metel fix */ #define RTMP_IO_READ32(_A, _R, _pV) \ { \ if ((_A)->bPCIclkOff == FALSE) \ @@ -603,7 +603,7 @@ void linux_pci_unmap_single(void *handle Val = readl((void *)((_A)->CSRBaseAddress + MAC_CSR0)); \ writeb((_V), (PUCHAR)((_A)->CSRBaseAddress + (_R))); \ } -#endif // #if defined(BRCM_6358) || defined(RALINK_2880) // +#endif /* #if defined(BRCM_6358) || defined(RALINK_2880) // */ #define RTMP_IO_WRITE16(_A, _R, _V) \ { \ @@ -611,9 +611,9 @@ void linux_pci_unmap_single(void *handle Val = readl((void *)((_A)->CSRBaseAddress + MAC_CSR0)); \ writew((_V), (PUSHORT)((_A)->CSRBaseAddress + (_R))); \ } -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ #ifdef RTMP_MAC_USB -//Patch for ASIC turst read/write bug, needs to remove after metel fix +/*Patch for ASIC turst read/write bug, needs to remove after metel fix */ #define RTMP_IO_READ32(_A, _R, _pV) \ RTUSBReadMACRegister((_A), (_R), (PUINT32) (_pV)) @@ -634,7 +634,7 @@ void linux_pci_unmap_single(void *handle { \ RTUSBSingleWrite((_A), (_R), (USHORT) (_V)); \ } -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ /*********************************************************************************** * Network Related data structure and marco definitions @@ -719,34 +719,34 @@ void linux_pci_unmap_single(void *handle #define CB_OFF 10 -// User Priority +/* User Priority */ #define RTMP_SET_PACKET_UP(_p, _prio) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+0] = _prio) #define RTMP_GET_PACKET_UP(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+0]) -// Fragment # +/* Fragment # */ #define RTMP_SET_PACKET_FRAGMENTS(_p, _num) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+1] = _num) #define RTMP_GET_PACKET_FRAGMENTS(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+1]) -// 0x0 ~0x7f: TX to AP's own BSS which has the specified AID. if AID>127, set bit 7 in RTMP_SET_PACKET_EMACTAB too. -//(this value also as MAC(on-chip WCID) table index) -// 0x80~0xff: TX to a WDS link. b0~6: WDS index +/* 0x0 ~0x7f: TX to AP's own BSS which has the specified AID. if AID>127, set bit 7 in RTMP_SET_PACKET_EMACTAB too. */ +/*(this value also as MAC(on-chip WCID) table index) */ +/* 0x80~0xff: TX to a WDS link. b0~6: WDS index */ #define RTMP_SET_PACKET_WCID(_p, _wdsidx) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+2] = _wdsidx) #define RTMP_GET_PACKET_WCID(_p) ((UCHAR)(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+2])) -// 0xff: PKTSRC_NDIS, others: local TX buffer index. This value affects how to a packet +/* 0xff: PKTSRC_NDIS, others: local TX buffer index. This value affects how to a packet */ #define RTMP_SET_PACKET_SOURCE(_p, _pktsrc) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+3] = _pktsrc) #define RTMP_GET_PACKET_SOURCE(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+3]) -// RTS/CTS-to-self protection method +/* RTS/CTS-to-self protection method */ #define RTMP_SET_PACKET_RTS(_p, _num) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+4] = _num) #define RTMP_GET_PACKET_RTS(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+4]) -// see RTMP_S(G)ET_PACKET_EMACTAB +/* see RTMP_S(G)ET_PACKET_EMACTAB */ -// TX rate index +/* TX rate index */ #define RTMP_SET_PACKET_TXRATE(_p, _rate) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+5] = _rate) #define RTMP_GET_PACKET_TXRATE(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+5]) -// From which Interface +/* From which Interface */ #define RTMP_SET_PACKET_IF(_p, _ifdx) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+6] = _ifdx) #define RTMP_GET_PACKET_IF(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+6]) #define RTMP_SET_PACKET_NET_DEVICE_MBSSID(_p, _bss) RTMP_SET_PACKET_IF((_p), (_bss)) @@ -759,9 +759,9 @@ void linux_pci_unmap_single(void *handle #define RTMP_SET_PACKET_MOREDATA(_p, _morebit) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+7] = _morebit) #define RTMP_GET_PACKET_MOREDATA(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+7]) -// -// Sepcific Pakcet Type definition -// +/* */ +/* Sepcific Pakcet Type definition */ +/* */ #define RTMP_PACKET_SPECIFIC_CB_OFFSET 11 #define RTMP_PACKET_SPECIFIC_DHCP 0x01 @@ -771,10 +771,10 @@ void linux_pci_unmap_single(void *handle #define RTMP_PACKET_SPECIFIC_VLAN 0x10 #define RTMP_PACKET_SPECIFIC_LLCSNAP 0x20 -//Specific +/*Specific */ #define RTMP_SET_PACKET_SPECIFIC(_p, _flg) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] = _flg) -//DHCP +/*DHCP */ #define RTMP_SET_PACKET_DHCP(_p, _flg) \ do{ \ if (_flg) \ @@ -784,7 +784,7 @@ void linux_pci_unmap_single(void *handle }while(0) #define RTMP_GET_PACKET_DHCP(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_DHCP) -//EAPOL +/*EAPOL */ #define RTMP_SET_PACKET_EAPOL(_p, _flg) \ do{ \ if (_flg) \ @@ -794,7 +794,7 @@ void linux_pci_unmap_single(void *handle }while(0) #define RTMP_GET_PACKET_EAPOL(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_EAPOL) -//WAI +/*WAI */ #define RTMP_SET_PACKET_WAI(_p, _flg) \ do{ \ if (_flg) \ @@ -806,7 +806,7 @@ void linux_pci_unmap_single(void *handle #define RTMP_GET_PACKET_LOWRATE(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & (RTMP_PACKET_SPECIFIC_EAPOL | RTMP_PACKET_SPECIFIC_DHCP | RTMP_PACKET_SPECIFIC_WAI)) -//VLAN +/*VLAN */ #define RTMP_SET_PACKET_VLAN(_p, _flg) \ do{ \ if (_flg) \ @@ -816,7 +816,7 @@ void linux_pci_unmap_single(void *handle }while(0) #define RTMP_GET_PACKET_VLAN(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_VLAN) -//LLC/SNAP +/*LLC/SNAP */ #define RTMP_SET_PACKET_LLCSNAP(_p, _flg) \ do{ \ if (_flg) \ @@ -827,7 +827,7 @@ void linux_pci_unmap_single(void *handle #define RTMP_GET_PACKET_LLCSNAP(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_LLCSNAP) -// IP +/* IP */ #define RTMP_SET_PACKET_IPV4(_p, _flg) \ do{ \ if (_flg) \ @@ -838,7 +838,7 @@ void linux_pci_unmap_single(void *handle #define RTMP_GET_PACKET_IPV4(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_IPV4) -// If this flag is set, it indicates that this EAPoL frame MUST be clear. +/* If this flag is set, it indicates that this EAPoL frame MUST be clear. */ #define RTMP_SET_PACKET_CLEAR_EAP_FRAME(_p, _flg) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+12] = _flg) #define RTMP_GET_PACKET_CLEAR_EAP_FRAME(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+12]) @@ -860,7 +860,7 @@ int rt28xx_packet_xmit(struct sk_buff *s #define IRQ_HANDLE_TYPE irqreturn_t IRQ_HANDLE_TYPE rt2860_interrupt(int irq, void *dev_instance); -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ INT rt28xx_sta_ioctl(IN PNET_DEV net_dev, IN OUT struct ifreq *rq, IN INT cmd); @@ -869,4 +869,4 @@ extern int ra_mtd_read(int num, loff_t f #define GET_PAD_FROM_NET_DEV(_pAd, _net_dev) (_pAd) = (PRTMP_ADAPTER)(_net_dev)->ml_priv; -#endif // __RT_LINUX_H__ // +#endif /* __RT_LINUX_H__ // */ Index: b/drivers/staging/rt2860/rtmp.h =================================================================== --- a/drivers/staging/rt2860/rtmp.h +++ b/drivers/staging/rt2860/rtmp.h @@ -49,14 +49,14 @@ typedef struct _RTMP_ADAPTER *PRTMP_ADAP typedef struct _RTMP_CHIP_OP_ RTMP_CHIP_OP; -//#define DBG 1 +/*#define DBG 1 */ -//#define DBG_DIAGNOSE 1 +/*#define DBG_DIAGNOSE 1 */ -//+++Add by shiang for merge MiniportMMRequest() and MiniportDataMMRequest() into one function +/*+++Add by shiang for merge MiniportMMRequest() and MiniportDataMMRequest() into one function */ #define MAX_DATAMM_RETRY 3 #define MGMT_USE_QUEUE_FLAG 0x80 -//---Add by shiang for merge MiniportMMRequest() and MiniportDataMMRequest() into one function +/*---Add by shiang for merge MiniportMMRequest() and MiniportDataMMRequest() into one function */ #define MAXSEQ (0xFFF) @@ -79,7 +79,7 @@ extern UCHAR EAPOL_LLC_SNAP[8]; extern UCHAR EAPOL[2]; extern UCHAR IPX[2]; extern UCHAR APPLE_TALK[2]; -extern UCHAR RateIdToPlcpSignal[12]; // see IEEE802.11a-1999 p.14 +extern UCHAR RateIdToPlcpSignal[12]; /* see IEEE802.11a-1999 p.14 */ extern UCHAR OfdmRateToRxwiMCS[]; extern UCHAR OfdmSignalToRateId[16]; extern UCHAR default_cwmin[4]; @@ -147,9 +147,9 @@ extern UCHAR RateSwitchTable11N2SForABan extern UCHAR PRE_N_HT_OUI[]; typedef struct _RSSI_SAMPLE { - CHAR LastRssi0; // last received RSSI - CHAR LastRssi1; // last received RSSI - CHAR LastRssi2; // last received RSSI + CHAR LastRssi0; /* last received RSSI */ + CHAR LastRssi1; /* last received RSSI */ + CHAR LastRssi2; /* last received RSSI */ CHAR AvgRssi0; CHAR AvgRssi1; CHAR AvgRssi2; @@ -158,14 +158,14 @@ typedef struct _RSSI_SAMPLE { SHORT AvgRssi2X8; } RSSI_SAMPLE; -// -// Queue structure and macros -// +/* */ +/* Queue structure and macros */ +/* */ typedef struct _QUEUE_ENTRY { struct _QUEUE_ENTRY *Next; } QUEUE_ENTRY, *PQUEUE_ENTRY; -// Queue structure +/* Queue structure */ typedef struct _QUEUE_HEADER { PQUEUE_ENTRY Head; PQUEUE_ENTRY Tail; @@ -224,15 +224,15 @@ typedef struct _QUEUE_HEADER { (QueueHeader)->Number++; \ } -// -// Macros for flag and ref count operations -// +/* */ +/* Macros for flag and ref count operations */ +/* */ #define RTMP_SET_FLAG(_M, _F) ((_M)->Flags |= (_F)) #define RTMP_CLEAR_FLAG(_M, _F) ((_M)->Flags &= ~(_F)) #define RTMP_CLEAR_FLAGS(_M) ((_M)->Flags = 0) #define RTMP_TEST_FLAG(_M, _F) (((_M)->Flags & (_F)) != 0) #define RTMP_TEST_FLAGS(_M, _F) (((_M)->Flags & (_F)) == (_F)) -// Macro for power save flag. +/* Macro for power save flag. */ #define RTMP_SET_PSFLAG(_M, _F) ((_M)->PSFlags |= (_F)) #define RTMP_CLEAR_PSFLAG(_M, _F) ((_M)->PSFlags &= ~(_F)) #define RTMP_CLEAR_PSFLAGS(_M) ((_M)->PSFlags = 0) @@ -266,7 +266,7 @@ typedef struct _QUEUE_HEADER { (_idx) = (_idx+1) % (_RingSize); \ } -// StaActive.SupportedHtPhy.MCSSet is copied from AP beacon. Don't need to update here. +/* StaActive.SupportedHtPhy.MCSSet is copied from AP beacon. Don't need to update here. */ #define COPY_HTSETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(_pAd) \ { \ _pAd->StaActive.SupportedHtPhy.ChannelWidth = _pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth; \ @@ -290,25 +290,25 @@ typedef struct _QUEUE_HEADER { _pAd->MacTab.Content[BSSID_WCID].MaxRAmpduFactor = (UCHAR)(_pHtCapability->HtCapParm.MaxRAmpduFactor); \ } -// -// MACRO for 32-bit PCI register read / write -// -// Usage : RTMP_IO_READ32( -// PRTMP_ADAPTER pAd, -// ULONG Register_Offset, -// PULONG pValue) -// -// RTMP_IO_WRITE32( -// PRTMP_ADAPTER pAd, -// ULONG Register_Offset, -// ULONG Value) -// - -// -// Common fragment list structure - Identical to the scatter gather frag list structure -// -//#define RTMP_SCATTER_GATHER_ELEMENT SCATTER_GATHER_ELEMENT -//#define PRTMP_SCATTER_GATHER_ELEMENT PSCATTER_GATHER_ELEMENT +/* */ +/* MACRO for 32-bit PCI register read / write */ +/* */ +/* Usage : RTMP_IO_READ32( */ +/* PRTMP_ADAPTER pAd, */ +/* ULONG Register_Offset, */ +/* PULONG pValue) */ +/* */ +/* RTMP_IO_WRITE32( */ +/* PRTMP_ADAPTER pAd, */ +/* ULONG Register_Offset, */ +/* ULONG Value) */ +/* */ + +/* */ +/* Common fragment list structure - Identical to the scatter gather frag list structure */ +/* */ +/*#define RTMP_SCATTER_GATHER_ELEMENT SCATTER_GATHER_ELEMENT */ +/*#define PRTMP_SCATTER_GATHER_ELEMENT PSCATTER_GATHER_ELEMENT */ #define NIC_MAX_PHYS_BUF_COUNT 8 typedef struct _RTMP_SCATTER_GATHER_ELEMENT { @@ -323,9 +323,9 @@ typedef struct _RTMP_SCATTER_GATHER_LIST RTMP_SCATTER_GATHER_ELEMENT Elements[NIC_MAX_PHYS_BUF_COUNT]; } RTMP_SCATTER_GATHER_LIST, *PRTMP_SCATTER_GATHER_LIST; -// -// Some utility macros -// +/* */ +/* Some utility macros */ +/* */ #ifndef min #define min(_a, _b) (((_a) < (_b)) ? (_a) : (_b)) #endif @@ -343,11 +343,11 @@ typedef struct _RTMP_SCATTER_GATHER_LIST #define MONITOR_ON(_p) (((_p)->StaCfg.BssType) == BSS_MONITOR) #define IDLE_ON(_p) (!INFRA_ON(_p) && !ADHOC_ON(_p)) -// Check LEAP & CCKM flags +/* Check LEAP & CCKM flags */ #define LEAP_ON(_p) (((_p)->StaCfg.LeapAuthMode) == CISCO_AuthModeLEAP) #define LEAP_CCKM_ON(_p) ((((_p)->StaCfg.LeapAuthMode) == CISCO_AuthModeLEAP) && ((_p)->StaCfg.LeapAuthInfo.CCKM == TRUE)) -// if orginal Ethernet frame contains no LLC/SNAP, then an extra LLC/SNAP encap is required +/* if orginal Ethernet frame contains no LLC/SNAP, then an extra LLC/SNAP encap is required */ #define EXTRA_LLCSNAP_ENCAP_FROM_PKT_START(_pBufVA, _pExtraLlcSnapEncap) \ { \ if (((*(_pBufVA + 12) << 8) + *(_pBufVA + 13)) > 1500) \ @@ -365,7 +365,7 @@ typedef struct _RTMP_SCATTER_GATHER_LIST } \ } -// New Define for new Tx Path. +/* New Define for new Tx Path. */ #define EXTRA_LLCSNAP_ENCAP_FROM_PKT_OFFSET(_pBufVA, _pExtraLlcSnapEncap) \ { \ if (((*(_pBufVA) << 8) + *(_pBufVA + 1)) > 1500) \ @@ -390,13 +390,13 @@ typedef struct _RTMP_SCATTER_GATHER_LIST NdisMoveMemory((_p + MAC_ADDR_LEN * 2), _pType, LENGTH_802_3_TYPE); \ } -// if pData has no LLC/SNAP (neither RFC1042 nor Bridge tunnel), keep it that way. -// else if the received frame is LLC/SNAP-encaped IPX or APPLETALK, preserve the LLC/SNAP field -// else remove the LLC/SNAP field from the result Ethernet frame -// Patch for WHQL only, which did not turn on Netbios but use IPX within its payload -// Note: -// _pData & _DataSize may be altered (remove 8-byte LLC/SNAP) by this MACRO -// _pRemovedLLCSNAP: pointer to removed LLC/SNAP; NULL is not removed +/* if pData has no LLC/SNAP (neither RFC1042 nor Bridge tunnel), keep it that way. */ +/* else if the received frame is LLC/SNAP-encaped IPX or APPLETALK, preserve the LLC/SNAP field */ +/* else remove the LLC/SNAP field from the result Ethernet frame */ +/* Patch for WHQL only, which did not turn on Netbios but use IPX within its payload */ +/* Note: */ +/* _pData & _DataSize may be altered (remove 8-byte LLC/SNAP) by this MACRO */ +/* _pRemovedLLCSNAP: pointer to removed LLC/SNAP; NULL is not removed */ #define CONVERT_TO_802_3(_p8023hdr, _pDA, _pSA, _pData, _DataSize, _pRemovedLLCSNAP) \ { \ char LLC_Len[2]; \ @@ -430,9 +430,9 @@ typedef struct _RTMP_SCATTER_GATHER_LIST } \ } -// Enqueue this frame to MLME engine -// We need to enqueue the whole frame because MLME need to pass data type -// information from 802.11 header +/* Enqueue this frame to MLME engine */ +/* We need to enqueue the whole frame because MLME need to pass data type */ +/* information from 802.11 header */ #ifdef RTMP_MAC_PCI #define REPORT_MGMT_FRAME_TO_MLME(_pAd, Wcid, _pFrame, _FrameSize, _Rssi0, _Rssi1, _Rssi2, _PlcpSignal) \ { \ @@ -441,21 +441,21 @@ typedef struct _RTMP_SCATTER_GATHER_LIST RTMP_IO_READ32(_pAd, TSF_TIMER_DW0, &Low32TSF); \ MlmeEnqueueForRecv(_pAd, Wcid, High32TSF, Low32TSF, (UCHAR)_Rssi0, (UCHAR)_Rssi1,(UCHAR)_Rssi2,_FrameSize, _pFrame, (UCHAR)_PlcpSignal); \ } -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ #ifdef RTMP_MAC_USB #define REPORT_MGMT_FRAME_TO_MLME(_pAd, Wcid, _pFrame, _FrameSize, _Rssi0, _Rssi1, _Rssi2, _PlcpSignal) \ { \ UINT32 High32TSF=0, Low32TSF=0; \ MlmeEnqueueForRecv(_pAd, Wcid, High32TSF, Low32TSF, (UCHAR)_Rssi0, (UCHAR)_Rssi1,(UCHAR)_Rssi2,_FrameSize, _pFrame, (UCHAR)_PlcpSignal); \ } -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ #define MAC_ADDR_EQUAL(pAddr1,pAddr2) RTMPEqualMemory((PVOID)(pAddr1), (PVOID)(pAddr2), MAC_ADDR_LEN) #define SSID_EQUAL(ssid1, len1, ssid2, len2) ((len1==len2) && (RTMPEqualMemory(ssid1, ssid2, len1))) -// -// Check if it is Japan W53(ch52,56,60,64) channel. -// +/* */ +/* Check if it is Japan W53(ch52,56,60,64) channel. */ +/* */ #define JapanChannelCheck(channel) ((channel == 52) || (channel == 56) || (channel == 60) || (channel == 64)) #define STA_EXTRA_SETTING(_pAd) @@ -472,67 +472,67 @@ typedef struct _RTMP_SCATTER_GATHER_LIST STA_EXTRA_SETTING(_pAd); \ } -// -// Data buffer for DMA operation, the buffer must be contiguous physical memory -// Both DMA to / from CPU use the same structure. -// +/* */ +/* Data buffer for DMA operation, the buffer must be contiguous physical memory */ +/* Both DMA to / from CPU use the same structure. */ +/* */ typedef struct _RTMP_DMABUF { ULONG AllocSize; - PVOID AllocVa; // TxBuf virtual address - NDIS_PHYSICAL_ADDRESS AllocPa; // TxBuf physical address + PVOID AllocVa; /* TxBuf virtual address */ + NDIS_PHYSICAL_ADDRESS AllocPa; /* TxBuf physical address */ } RTMP_DMABUF, *PRTMP_DMABUF; -// -// Control block (Descriptor) for all ring descriptor DMA operation, buffer must be -// contiguous physical memory. NDIS_PACKET stored the binding Rx packet descriptor -// which won't be released, driver has to wait until upper layer return the packet -// before giveing up this rx ring descriptor to ASIC. NDIS_BUFFER is assocaited pair -// to describe the packet buffer. For Tx, NDIS_PACKET stored the tx packet descriptor -// which driver should ACK upper layer when the tx is physically done or failed. -// +/* */ +/* Control block (Descriptor) for all ring descriptor DMA operation, buffer must be */ +/* contiguous physical memory. NDIS_PACKET stored the binding Rx packet descriptor */ +/* which won't be released, driver has to wait until upper layer return the packet */ +/* before giveing up this rx ring descriptor to ASIC. NDIS_BUFFER is assocaited pair */ +/* to describe the packet buffer. For Tx, NDIS_PACKET stored the tx packet descriptor */ +/* which driver should ACK upper layer when the tx is physically done or failed. */ +/* */ typedef struct _RTMP_DMACB { - ULONG AllocSize; // Control block size - PVOID AllocVa; // Control block virtual address - NDIS_PHYSICAL_ADDRESS AllocPa; // Control block physical address + ULONG AllocSize; /* Control block size */ + PVOID AllocVa; /* Control block virtual address */ + NDIS_PHYSICAL_ADDRESS AllocPa; /* Control block physical address */ PNDIS_PACKET pNdisPacket; PNDIS_PACKET pNextNdisPacket; - RTMP_DMABUF DmaBuf; // Associated DMA buffer structure + RTMP_DMABUF DmaBuf; /* Associated DMA buffer structure */ } RTMP_DMACB, *PRTMP_DMACB; typedef struct _RTMP_TX_RING { RTMP_DMACB Cell[TX_RING_SIZE]; UINT32 TxCpuIdx; UINT32 TxDmaIdx; - UINT32 TxSwFreeIdx; // software next free tx index + UINT32 TxSwFreeIdx; /* software next free tx index */ } RTMP_TX_RING, *PRTMP_TX_RING; typedef struct _RTMP_RX_RING { RTMP_DMACB Cell[RX_RING_SIZE]; UINT32 RxCpuIdx; UINT32 RxDmaIdx; - INT32 RxSwReadIdx; // software next read index + INT32 RxSwReadIdx; /* software next read index */ } RTMP_RX_RING, *PRTMP_RX_RING; typedef struct _RTMP_MGMT_RING { RTMP_DMACB Cell[MGMT_RING_SIZE]; UINT32 TxCpuIdx; UINT32 TxDmaIdx; - UINT32 TxSwFreeIdx; // software next free tx index + UINT32 TxSwFreeIdx; /* software next free tx index */ } RTMP_MGMT_RING, *PRTMP_MGMT_RING; -// -// Statistic counter structure -// +/* */ +/* Statistic counter structure */ +/* */ typedef struct _COUNTER_802_3 { - // General Stats + /* General Stats */ ULONG GoodTransmits; ULONG GoodReceives; ULONG TxErrors; ULONG RxErrors; ULONG RxNoBuffer; - // Ethernet Stats + /* Ethernet Stats */ ULONG RcvAlignmentErrors; ULONG OneCollision; ULONG MoreCollisions; @@ -557,8 +557,8 @@ typedef struct _COUNTER_802_11 { } COUNTER_802_11, *PCOUNTER_802_11; typedef struct _COUNTER_RALINK { - ULONG TransmittedByteCount; // both successful and failure, used to calculate TX throughput - ULONG ReceivedByteCount; // both CRC okay and CRC error, used to calculate RX throughput + ULONG TransmittedByteCount; /* both successful and failure, used to calculate TX throughput */ + ULONG ReceivedByteCount; /* both CRC okay and CRC error, used to calculate RX throughput */ ULONG BeenDisassociatedCount; ULONG BadCQIAutoRecoveryCount; ULONG PoorCQIRoamingCount; @@ -580,17 +580,17 @@ typedef struct _COUNTER_RALINK { UINT32 OneSecReceivedByteCount; UINT32 OneSecFrameDuplicateCount; - UINT32 OneSecTransmittedByteCount; // both successful and failure, used to calculate TX throughput + UINT32 OneSecTransmittedByteCount; /* both successful and failure, used to calculate TX throughput */ UINT32 OneSecTxNoRetryOkCount; UINT32 OneSecTxRetryOkCount; UINT32 OneSecTxFailCount; - UINT32 OneSecFalseCCACnt; // CCA error count, for debug purpose, might move to global counter - UINT32 OneSecRxOkCnt; // RX without error - UINT32 OneSecRxOkDataCnt; // unicast-to-me DATA frame count - UINT32 OneSecRxFcsErrCnt; // CRC error + UINT32 OneSecFalseCCACnt; /* CCA error count, for debug purpose, might move to global counter */ + UINT32 OneSecRxOkCnt; /* RX without error */ + UINT32 OneSecRxOkDataCnt; /* unicast-to-me DATA frame count */ + UINT32 OneSecRxFcsErrCnt; /* CRC error */ UINT32 OneSecBeaconSentCnt; - UINT32 LastOneSecTotalTxCount; // OneSecTxNoRetryOkCount + OneSecTxRetryOkCount + OneSecTxFailCount - UINT32 LastOneSecRxOkDataCnt; // OneSecRxOkDataCnt + UINT32 LastOneSecTotalTxCount; /* OneSecTxNoRetryOkCount + OneSecTxRetryOkCount + OneSecTxFailCount */ + UINT32 LastOneSecRxOkDataCnt; /* OneSecRxOkDataCnt */ ULONG DuplicateRcv; ULONG TxAggCount; ULONG TxNonAggCount; @@ -622,15 +622,15 @@ typedef struct _COUNTER_RALINK { } COUNTER_RALINK, *PCOUNTER_RALINK; typedef struct _COUNTER_DRS { - // to record the each TX rate's quality. 0 is best, the bigger the worse. + /* to record the each TX rate's quality. 0 is best, the bigger the worse. */ USHORT TxQuality[MAX_STEP_OF_TX_RATE_SWITCH]; UCHAR PER[MAX_STEP_OF_TX_RATE_SWITCH]; - UCHAR TxRateUpPenalty; // extra # of second penalty due to last unstable condition - ULONG CurrTxRateStableTime; // # of second in current TX rate + UCHAR TxRateUpPenalty; /* extra # of second penalty due to last unstable condition */ + ULONG CurrTxRateStableTime; /* # of second in current TX rate */ BOOLEAN fNoisyEnvironment; BOOLEAN fLastSecAccordingRSSI; - UCHAR LastSecTxRateChangeAction; // 0: no change, 1:rate UP, 2:rate down - UCHAR LastTimeTxRateChangeAction; //Keep last time value of LastSecTxRateChangeAction + UCHAR LastSecTxRateChangeAction; /* 0: no change, 1:rate UP, 2:rate down */ + UCHAR LastTimeTxRateChangeAction; /*Keep last time value of LastSecTxRateChangeAction */ ULONG LastTxOkCount; } COUNTER_DRS, *PCOUNTER_DRS; @@ -638,22 +638,22 @@ typedef struct _COUNTER_DRS { * security key related data structure **************************************************************************/ typedef struct _CIPHER_KEY { - UCHAR Key[16]; // right now we implement 4 keys, 128 bits max - UCHAR RxMic[8]; // make alignment + UCHAR Key[16]; /* right now we implement 4 keys, 128 bits max */ + UCHAR RxMic[8]; /* make alignment */ UCHAR TxMic[8]; - UCHAR TxTsc[6]; // 48bit TSC value - UCHAR RxTsc[6]; // 48bit TSC value - UCHAR CipherAlg; // 0-none, 1:WEP64, 2:WEP128, 3:TKIP, 4:AES, 5:CKIP64, 6:CKIP128 + UCHAR TxTsc[6]; /* 48bit TSC value */ + UCHAR RxTsc[6]; /* 48bit TSC value */ + UCHAR CipherAlg; /* 0-none, 1:WEP64, 2:WEP128, 3:TKIP, 4:AES, 5:CKIP64, 6:CKIP128 */ UCHAR KeyLen; UCHAR BssId[6]; - // Key length for each key, 0: entry is invalid - UCHAR Type; // Indicate Pairwise/Group when reporting MIC error + /* Key length for each key, 0: entry is invalid */ + UCHAR Type; /* Indicate Pairwise/Group when reporting MIC error */ } CIPHER_KEY, *PCIPHER_KEY; -// structure to define WPA Group Key Rekey Interval +/* structure to define WPA Group Key Rekey Interval */ typedef struct PACKED _RT_802_11_WPA_REKEY { - ULONG ReKeyMethod; // mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based - ULONG ReKeyInterval; // time-based: seconds, packet-based: kilo-packets + ULONG ReKeyMethod; /* mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based */ + ULONG ReKeyInterval; /* time-based: seconds, packet-based: kilo-packets */ } RT_WPA_REKEY, *PRT_WPA_REKEY, RT_802_11_WPA_REKEY, *PRT_802_11_WPA_REKEY; #ifdef RTMP_MAC_USB @@ -661,26 +661,26 @@ typedef struct PACKED _RT_802_11_WPA_REK * RTUSB I/O related data structure **************************************************************************/ typedef struct _RT_SET_ASIC_WCID { - ULONG WCID; // mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based - ULONG SetTid; // time-based: seconds, packet-based: kilo-packets - ULONG DeleteTid; // time-based: seconds, packet-based: kilo-packets - UCHAR Addr[MAC_ADDR_LEN]; // avoid in interrupt when write key + ULONG WCID; /* mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based */ + ULONG SetTid; /* time-based: seconds, packet-based: kilo-packets */ + ULONG DeleteTid; /* time-based: seconds, packet-based: kilo-packets */ + UCHAR Addr[MAC_ADDR_LEN]; /* avoid in interrupt when write key */ } RT_SET_ASIC_WCID, *PRT_SET_ASIC_WCID; typedef struct _RT_SET_ASIC_WCID_ATTRI { - ULONG WCID; // mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based - ULONG Cipher; // ASIC Cipher definition + ULONG WCID; /* mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based */ + ULONG Cipher; /* ASIC Cipher definition */ UCHAR Addr[ETH_LENGTH_OF_ADDRESS]; } RT_SET_ASIC_WCID_ATTRI, *PRT_SET_ASIC_WCID_ATTRI; -// for USB interface, avoid in interrupt when write key +/* for USB interface, avoid in interrupt when write key */ typedef struct RT_ADD_PAIRWISE_KEY_ENTRY { UCHAR MacAddr[6]; - USHORT MacTabMatchWCID; // ASIC + USHORT MacTabMatchWCID; /* ASIC */ CIPHER_KEY CipherKey; } RT_ADD_PAIRWISE_KEY_ENTRY, *PRT_ADD_PAIRWISE_KEY_ENTRY; -// Cipher suite type for mixed mode group cipher, P802.11i-2004 +/* Cipher suite type for mixed mode group cipher, P802.11i-2004 */ typedef enum _RT_802_11_CIPHER_SUITE_TYPE { Cipher_Type_NONE, Cipher_Type_WEP40, @@ -689,14 +689,14 @@ typedef enum _RT_802_11_CIPHER_SUITE_TYP Cipher_Type_CCMP, Cipher_Type_WEP104 } RT_802_11_CIPHER_SUITE_TYPE, *PRT_802_11_CIPHER_SUITE_TYPE; -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ typedef struct { UCHAR Addr[MAC_ADDR_LEN]; - UCHAR ErrorCode[2]; //00 01-Invalid authentication type - //00 02-Authentication timeout - //00 03-Challenge from AP failed - //00 04-Challenge to AP failed + UCHAR ErrorCode[2]; /*00 01-Invalid authentication type */ + /*00 02-Authentication timeout */ + /*00 03-Challenge from AP failed */ + /*00 04-Challenge to AP failed */ BOOLEAN Reported; } ROGUEAP_ENTRY, *PROGUEAP_ENTRY; @@ -705,23 +705,23 @@ typedef struct { ROGUEAP_ENTRY RogueApEntry[MAX_LEN_OF_BSS_TABLE]; } ROGUEAP_TABLE, *PROGUEAP_TABLE; -// -// Cisco IAPP format -// +/* */ +/* Cisco IAPP format */ +/* */ typedef struct _CISCO_IAPP_CONTENT_ { - USHORT Length; //IAPP Length - UCHAR MessageType; //IAPP type - UCHAR FunctionCode; //IAPP function type + USHORT Length; /*IAPP Length */ + UCHAR MessageType; /*IAPP type */ + UCHAR FunctionCode; /*IAPP function type */ UCHAR DestinaionMAC[MAC_ADDR_LEN]; UCHAR SourceMAC[MAC_ADDR_LEN]; - USHORT Tag; //Tag(element IE) - Adjacent AP report - USHORT TagLength; //Length of element not including 4 byte header - UCHAR OUI[4]; //0x00, 0x40, 0x96, 0x00 - UCHAR PreviousAP[MAC_ADDR_LEN]; //MAC Address of access point + USHORT Tag; /*Tag(element IE) - Adjacent AP report */ + USHORT TagLength; /*Length of element not including 4 byte header */ + UCHAR OUI[4]; /*0x00, 0x40, 0x96, 0x00 */ + UCHAR PreviousAP[MAC_ADDR_LEN]; /*MAC Address of access point */ USHORT Channel; USHORT SsidLen; UCHAR Ssid[MAX_LEN_OF_SSID]; - USHORT Seconds; //Seconds that the client has been disassociated. + USHORT Seconds; /*Seconds that the client has been disassociated. */ } CISCO_IAPP_CONTENT, *PCISCO_IAPP_CONTENT; /* @@ -732,55 +732,55 @@ typedef struct _FRAGMENT_FRAME { ULONG RxSize; USHORT Sequence; USHORT LastFrag; - ULONG Flags; // Some extra frame information. bit 0: LLC presented + ULONG Flags; /* Some extra frame information. bit 0: LLC presented */ } FRAGMENT_FRAME, *PFRAGMENT_FRAME; -// -// Packet information for NdisQueryPacket -// +/* */ +/* Packet information for NdisQueryPacket */ +/* */ typedef struct _PACKET_INFO { - UINT PhysicalBufferCount; // Physical breaks of buffer descripor chained - UINT BufferCount; // Number of Buffer descriptor chained - UINT TotalPacketLength; // Self explained - PNDIS_BUFFER pFirstBuffer; // Pointer to first buffer descriptor + UINT PhysicalBufferCount; /* Physical breaks of buffer descripor chained */ + UINT BufferCount; /* Number of Buffer descriptor chained */ + UINT TotalPacketLength; /* Self explained */ + PNDIS_BUFFER pFirstBuffer; /* Pointer to first buffer descriptor */ } PACKET_INFO, *PPACKET_INFO; -// -// Arcfour Structure Added by PaulWu -// +/* */ +/* Arcfour Structure Added by PaulWu */ +/* */ typedef struct _ARCFOUR { UINT X; UINT Y; UCHAR STATE[256]; } ARCFOURCONTEXT, *PARCFOURCONTEXT; -// -// Tkip Key structure which RC4 key & MIC calculation -// +/* */ +/* Tkip Key structure which RC4 key & MIC calculation */ +/* */ typedef struct _TKIP_KEY_INFO { - UINT nBytesInM; // # bytes in M for MICKEY + UINT nBytesInM; /* # bytes in M for MICKEY */ ULONG IV16; ULONG IV32; - ULONG K0; // for MICKEY Low - ULONG K1; // for MICKEY Hig - ULONG L; // Current state for MICKEY - ULONG R; // Current state for MICKEY - ULONG M; // Message accumulator for MICKEY + ULONG K0; /* for MICKEY Low */ + ULONG K1; /* for MICKEY Hig */ + ULONG L; /* Current state for MICKEY */ + ULONG R; /* Current state for MICKEY */ + ULONG M; /* Message accumulator for MICKEY */ UCHAR RC4KEY[16]; UCHAR MIC[8]; } TKIP_KEY_INFO, *PTKIP_KEY_INFO; -// -// Private / Misc data, counters for driver internal use -// +/* */ +/* Private / Misc data, counters for driver internal use */ +/* */ typedef struct __PRIVATE_STRUC { - UINT SystemResetCnt; // System reset counter - UINT TxRingFullCnt; // Tx ring full occurrance number - UINT PhyRxErrCnt; // PHY Rx error count, for debug purpose, might move to global counter - // Variables for WEP encryption / decryption in rtmp_wep.c + UINT SystemResetCnt; /* System reset counter */ + UINT TxRingFullCnt; /* Tx ring full occurrance number */ + UINT PhyRxErrCnt; /* PHY Rx error count, for debug purpose, might move to global counter */ + /* Variables for WEP encryption / decryption in rtmp_wep.c */ UINT FCSCRC32; ARCFOURCONTEXT WEPCONTEXT; - // Tkip stuff + /* Tkip stuff */ TKIP_KEY_INFO Tx; TKIP_KEY_INFO Rx; } PRIVATE_STRUC, *PPRIVATE_STRUC; @@ -788,19 +788,19 @@ typedef struct __PRIVATE_STRUC { /*************************************************************************** * Channel and BBP related data structures **************************************************************************/ -// structure to tune BBP R66 (BBP TUNING) +/* structure to tune BBP R66 (BBP TUNING) */ typedef struct _BBP_R66_TUNING { BOOLEAN bEnable; - USHORT FalseCcaLowerThreshold; // default 100 - USHORT FalseCcaUpperThreshold; // default 512 + USHORT FalseCcaLowerThreshold; /* default 100 */ + USHORT FalseCcaUpperThreshold; /* default 512 */ UCHAR R66Delta; UCHAR R66CurrentValue; - BOOLEAN R66LowerUpperSelect; //Before LinkUp, Used LowerBound or UpperBound as R66 value. + BOOLEAN R66LowerUpperSelect; /*Before LinkUp, Used LowerBound or UpperBound as R66 value. */ } BBP_R66_TUNING, *PBBP_R66_TUNING; -// structure to store channel TX power +/* structure to store channel TX power */ typedef struct _CHANNEL_TX_POWER { - USHORT RemainingTimeForUse; //unit: sec + USHORT RemainingTimeForUse; /*unit: sec */ UCHAR Channel; CHAR Power; CHAR Power2; @@ -808,26 +808,26 @@ typedef struct _CHANNEL_TX_POWER { UCHAR DfsReq; } CHANNEL_TX_POWER, *PCHANNEL_TX_POWER; -// structure to store 802.11j channel TX power +/* structure to store 802.11j channel TX power */ typedef struct _CHANNEL_11J_TX_POWER { UCHAR Channel; - UCHAR BW; // BW_10 or BW_20 + UCHAR BW; /* BW_10 or BW_20 */ CHAR Power; CHAR Power2; - USHORT RemainingTimeForUse; //unit: sec + USHORT RemainingTimeForUse; /*unit: sec */ } CHANNEL_11J_TX_POWER, *PCHANNEL_11J_TX_POWER; typedef struct _SOFT_RX_ANT_DIVERSITY_STRUCT { - UCHAR EvaluatePeriod; // 0:not evalute status, 1: evaluate status, 2: switching status + UCHAR EvaluatePeriod; /* 0:not evalute status, 1: evaluate status, 2: switching status */ UCHAR EvaluateStableCnt; - UCHAR Pair1PrimaryRxAnt; // 0:Ant-E1, 1:Ant-E2 - UCHAR Pair1SecondaryRxAnt; // 0:Ant-E1, 1:Ant-E2 - UCHAR Pair2PrimaryRxAnt; // 0:Ant-E3, 1:Ant-E4 - UCHAR Pair2SecondaryRxAnt; // 0:Ant-E3, 1:Ant-E4 - SHORT Pair1AvgRssi[2]; // AvgRssi[0]:E1, AvgRssi[1]:E2 - SHORT Pair2AvgRssi[2]; // AvgRssi[0]:E3, AvgRssi[1]:E4 - SHORT Pair1LastAvgRssi; // - SHORT Pair2LastAvgRssi; // + UCHAR Pair1PrimaryRxAnt; /* 0:Ant-E1, 1:Ant-E2 */ + UCHAR Pair1SecondaryRxAnt; /* 0:Ant-E1, 1:Ant-E2 */ + UCHAR Pair2PrimaryRxAnt; /* 0:Ant-E3, 1:Ant-E4 */ + UCHAR Pair2SecondaryRxAnt; /* 0:Ant-E3, 1:Ant-E4 */ + SHORT Pair1AvgRssi[2]; /* AvgRssi[0]:E1, AvgRssi[1]:E2 */ + SHORT Pair2AvgRssi[2]; /* AvgRssi[0]:E3, AvgRssi[1]:E4 */ + SHORT Pair1LastAvgRssi; /* */ + SHORT Pair2LastAvgRssi; /* */ ULONG RcvPktNumWhenEvaluate; BOOLEAN FirstPktArrivedWhenEvaluate; RALINK_TIMER_STRUCT RxAntDiversityTimer; @@ -837,19 +837,19 @@ typedef struct _SOFT_RX_ANT_DIVERSITY_ST * structure for radar detection and channel switch **************************************************************************/ typedef struct _RADAR_DETECT_STRUCT { - //BOOLEAN IEEE80211H; // 0: disable, 1: enable IEEE802.11h - UCHAR CSCount; //Channel switch counter - UCHAR CSPeriod; //Channel switch period (beacon count) - UCHAR RDCount; //Radar detection counter - UCHAR RDMode; //Radar Detection mode - UCHAR RDDurRegion; //Radar detection duration region + /*BOOLEAN IEEE80211H; // 0: disable, 1: enable IEEE802.11h */ + UCHAR CSCount; /*Channel switch counter */ + UCHAR CSPeriod; /*Channel switch period (beacon count) */ + UCHAR RDCount; /*Radar detection counter */ + UCHAR RDMode; /*Radar Detection mode */ + UCHAR RDDurRegion; /*Radar detection duration region */ UCHAR BBPR16; UCHAR BBPR17; UCHAR BBPR18; UCHAR BBPR21; UCHAR BBPR22; UCHAR BBPR64; - ULONG InServiceMonitorCount; // unit: sec + ULONG InServiceMonitorCount; /* unit: sec */ UINT8 DfsSessionTime; BOOLEAN bFastDfs; UINT8 ChMovingTime; @@ -863,25 +863,25 @@ typedef enum _ABGBAND_STATE_ { } ABGBAND_STATE; #ifdef RTMP_MAC_PCI -// Power save method control +/* Power save method control */ typedef union _PS_CONTROL { struct { - ULONG EnablePSinIdle:1; // Enable radio off when not connect to AP. radio on only when sitesurvey, - ULONG EnableNewPS:1; // Enable new Chip power save fucntion . New method can only be applied in chip version after 2872. and PCIe. - ULONG rt30xxPowerMode:2; // Power Level Mode for rt30xx chip - ULONG rt30xxFollowHostASPM:1; // Card Follows Host's setting for rt30xx chip. - ULONG rt30xxForceASPMTest:1; // Force enable L1 for rt30xx chip. This has higher priority than rt30xxFollowHostASPM Mode. - ULONG rsv:26; // Radio Measurement Enable + ULONG EnablePSinIdle:1; /* Enable radio off when not connect to AP. radio on only when sitesurvey, */ + ULONG EnableNewPS:1; /* Enable new Chip power save fucntion . New method can only be applied in chip version after 2872. and PCIe. */ + ULONG rt30xxPowerMode:2; /* Power Level Mode for rt30xx chip */ + ULONG rt30xxFollowHostASPM:1; /* Card Follows Host's setting for rt30xx chip. */ + ULONG rt30xxForceASPMTest:1; /* Force enable L1 for rt30xx chip. This has higher priority than rt30xxFollowHostASPM Mode. */ + ULONG rsv:26; /* Radio Measurement Enable */ } field; ULONG word; } PS_CONTROL, *PPS_CONTROL; -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ /*************************************************************************** * structure for MLME state machine **************************************************************************/ typedef struct _MLME_STRUCT { - // STA state machines + /* STA state machines */ STATE_MACHINE CntlMachine; STATE_MACHINE AssocMachine; STATE_MACHINE AuthMachine; @@ -894,15 +894,15 @@ typedef struct _MLME_STRUCT { STATE_MACHINE_FUNC AuthRspFunc[AUTH_RSP_FUNC_SIZE]; STATE_MACHINE_FUNC SyncFunc[SYNC_FUNC_SIZE]; STATE_MACHINE_FUNC ActFunc[ACT_FUNC_SIZE]; - // Action + /* Action */ STATE_MACHINE ActMachine; - // common WPA state machine + /* common WPA state machine */ STATE_MACHINE WpaMachine; STATE_MACHINE_FUNC WpaFunc[WPA_FUNC_SIZE]; - ULONG ChannelQuality; // 0..100, Channel Quality Indication for Roaming - ULONG Now32; // latch the value of NdisGetSystemUpTime() + ULONG ChannelQuality; /* 0..100, Channel Quality Indication for Roaming */ + ULONG Now32; /* latch the value of NdisGetSystemUpTime() */ ULONG LastSendNULLpsmTime; BOOLEAN bRunning; @@ -919,7 +919,7 @@ typedef struct _MLME_STRUCT { UCHAR bPsPollTimerRunning; RALINK_TIMER_STRUCT PsPollTimer; RALINK_TIMER_STRUCT RadioOnOffTimer; -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ ULONG PeriodicRound; ULONG OneSecPeriodicRound; @@ -931,12 +931,12 @@ typedef struct _MLME_STRUCT { #ifdef RT30xx UCHAR CaliBW40RfR24; UCHAR CaliBW20RfR24; -#endif // RT30xx // +#endif /* RT30xx // */ #ifdef RTMP_MAC_USB RALINK_TIMER_STRUCT AutoWakeupTimer; BOOLEAN AutoWakeupTimerRunning; -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ } MLME_STRUCT, *PMLME_STRUCT; /*************************************************************************** @@ -979,7 +979,7 @@ typedef struct _BA_ORI_ENTRY { UCHAR TID; UCHAR BAWinSize; UCHAR Token; -// Sequence is to fill every outgoing QoS DATA frame's sequence field in 802.11 header. +/* Sequence is to fill every outgoing QoS DATA frame's sequence field in 802.11 header. */ USHORT Sequence; USHORT TimeOutValue; ORI_BLOCKACK_STATUS ORI_BA_Status; @@ -990,47 +990,47 @@ typedef struct _BA_ORI_ENTRY { typedef struct _BA_REC_ENTRY { UCHAR Wcid; UCHAR TID; - UCHAR BAWinSize; // 7.3.1.14. each buffer is capable of holding a max AMSDU or MSDU. - //UCHAR NumOfRxPkt; - //UCHAR Curindidx; // the head in the RX reordering buffer + UCHAR BAWinSize; /* 7.3.1.14. each buffer is capable of holding a max AMSDU or MSDU. */ + /*UCHAR NumOfRxPkt; */ + /*UCHAR Curindidx; // the head in the RX reordering buffer */ USHORT LastIndSeq; -// USHORT LastIndSeqAtTimer; +/* USHORT LastIndSeqAtTimer; */ USHORT TimeOutValue; RALINK_TIMER_STRUCT RECBATimer; ULONG LastIndSeqAtTimer; ULONG nDropPacket; ULONG rcvSeq; REC_BLOCKACK_STATUS REC_BA_Status; -// UCHAR RxBufIdxUsed; - // corresponding virtual address for RX reordering packet storage. - //RTMP_REORDERDMABUF MAP_RXBuf[MAX_RX_REORDERBUF]; - NDIS_SPIN_LOCK RxReRingLock; // Rx Ring spinlock -// struct _BA_REC_ENTRY *pNext; +/* UCHAR RxBufIdxUsed; */ + /* corresponding virtual address for RX reordering packet storage. */ + /*RTMP_REORDERDMABUF MAP_RXBuf[MAX_RX_REORDERBUF]; */ + NDIS_SPIN_LOCK RxReRingLock; /* Rx Ring spinlock */ +/* struct _BA_REC_ENTRY *pNext; */ PVOID pAdapter; struct reordering_list list; } BA_REC_ENTRY, *PBA_REC_ENTRY; typedef struct { - ULONG numAsRecipient; // I am recipient of numAsRecipient clients. These client are in the BARecEntry[] - ULONG numAsOriginator; // I am originator of numAsOriginator clients. These clients are in the BAOriEntry[] - ULONG numDoneOriginator; // count Done Originator sessions + ULONG numAsRecipient; /* I am recipient of numAsRecipient clients. These client are in the BARecEntry[] */ + ULONG numAsOriginator; /* I am originator of numAsOriginator clients. These clients are in the BAOriEntry[] */ + ULONG numDoneOriginator; /* count Done Originator sessions */ BA_ORI_ENTRY BAOriEntry[MAX_LEN_OF_BA_ORI_TABLE]; BA_REC_ENTRY BARecEntry[MAX_LEN_OF_BA_REC_TABLE]; } BA_TABLE, *PBA_TABLE; -//For QureyBATableOID use; +/*For QureyBATableOID use; */ typedef struct PACKED _OID_BA_REC_ENTRY { UCHAR MACAddr[MAC_ADDR_LEN]; - UCHAR BaBitmap; // if (BaBitmap&(1<HTPhyMode.field.MODE >= MODE_HTMIX) -//This structure is for all 802.11n card InterOptibilityTest action. Reset all Num every n second. (Details see MLMEPeriodic) +/*This structure is for all 802.11n card InterOptibilityTest action. Reset all Num every n second. (Details see MLMEPeriodic) */ typedef struct _IOT_STRUC { UCHAR Threshold[2]; - UCHAR ReorderTimeOutNum[MAX_LEN_OF_BA_REC_TABLE]; // compare with threshold[0] - UCHAR RefreshNum[MAX_LEN_OF_BA_REC_TABLE]; // compare with threshold[1] + UCHAR ReorderTimeOutNum[MAX_LEN_OF_BA_REC_TABLE]; /* compare with threshold[0] */ + UCHAR RefreshNum[MAX_LEN_OF_BA_REC_TABLE]; /* compare with threshold[1] */ ULONG OneSecInWindowCount; ULONG OneSecFrameDuplicateCount; ULONG OneSecOutWindowCount; @@ -1098,16 +1098,16 @@ typedef struct _IOT_STRUC { BOOLEAN bToggle; } IOT_STRUC, *PIOT_STRUC; -// This is the registry setting for 802.11n transmit setting. Used in advanced page. +/* This is the registry setting for 802.11n transmit setting. Used in advanced page. */ typedef union _REG_TRANSMIT_SETTING { struct { - //UINT32 PhyMode:4; - //UINT32 MCS:7; // MCS + /*UINT32 PhyMode:4; */ + /*UINT32 MCS:7; // MCS */ UINT32 rsv0:10; UINT32 TxBF:1; - UINT32 BW:1; //channel bandwidth 20MHz or 40 MHz + UINT32 BW:1; /*channel bandwidth 20MHz or 40 MHz */ UINT32 ShortGI:1; - UINT32 STBC:1; //SPACE + UINT32 STBC:1; /*SPACE */ UINT32 TRANSNO:2; UINT32 HTMODE:1; UINT32 EXTCHA:2; @@ -1118,9 +1118,9 @@ typedef union _REG_TRANSMIT_SETTING { typedef union _DESIRED_TRANSMIT_SETTING { struct { - USHORT MCS:7; // MCS + USHORT MCS:7; /* MCS */ USHORT PhyMode:4; - USHORT FixedTxMode:2; // If MCS isn't AUTO, fix rate in CCK, OFDM or HT mode. + USHORT FixedTxMode:2; /* If MCS isn't AUTO, fix rate in CCK, OFDM or HT mode. */ USHORT rsv:3; } field; USHORT word; @@ -1136,11 +1136,11 @@ typedef struct _BEACON_SYNC_STRUCT_ { UCHAR BeaconTxWI[HW_BEACON_MAX_COUNT][TXWI_SIZE]; ULONG TimIELocationInBeacon[HW_BEACON_MAX_COUNT]; ULONG CapabilityInfoLocationInBeacon[HW_BEACON_MAX_COUNT]; - BOOLEAN EnableBeacon; // trigger to enable beacon transmission. - UCHAR BeaconBitMap; // NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change. - UCHAR DtimBitOn; // NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change. + BOOLEAN EnableBeacon; /* trigger to enable beacon transmission. */ + UCHAR BeaconBitMap; /* NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change. */ + UCHAR DtimBitOn; /* NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change. */ } BEACON_SYNC_STRUCT; -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ /*************************************************************************** * Multiple SSID related data structures @@ -1168,39 +1168,39 @@ typedef struct _BEACON_SYNC_STRUCT_ { UCHAR bit_offset = wcid & 0x7; \ ad_p->ApCfg.MBSSID[apidx].TimBitmaps[tim_offset] |= BIT8[bit_offset]; } -// configuration common to OPMODE_AP as well as OPMODE_STA +/* configuration common to OPMODE_AP as well as OPMODE_STA */ typedef struct _COMMON_CONFIG { BOOLEAN bCountryFlag; UCHAR CountryCode[3]; UCHAR Geography; - UCHAR CountryRegion; // Enum of country region, 0:FCC, 1:IC, 2:ETSI, 3:SPAIN, 4:France, 5:MKK, 6:MKK1, 7:Israel - UCHAR CountryRegionForABand; // Enum of country region for A band - UCHAR PhyMode; // PHY_11A, PHY_11B, PHY_11BG_MIXED, PHY_ABG_MIXED - USHORT Dsifs; // in units of usec - ULONG PacketFilter; // Packet filter for receiving + UCHAR CountryRegion; /* Enum of country region, 0:FCC, 1:IC, 2:ETSI, 3:SPAIN, 4:France, 5:MKK, 6:MKK1, 7:Israel */ + UCHAR CountryRegionForABand; /* Enum of country region for A band */ + UCHAR PhyMode; /* PHY_11A, PHY_11B, PHY_11BG_MIXED, PHY_ABG_MIXED */ + USHORT Dsifs; /* in units of usec */ + ULONG PacketFilter; /* Packet filter for receiving */ UINT8 RegulatoryClass; - CHAR Ssid[MAX_LEN_OF_SSID]; // NOT NULL-terminated - UCHAR SsidLen; // the actual ssid length in used - UCHAR LastSsidLen; // the actual ssid length in used - CHAR LastSsid[MAX_LEN_OF_SSID]; // NOT NULL-terminated + CHAR Ssid[MAX_LEN_OF_SSID]; /* NOT NULL-terminated */ + UCHAR SsidLen; /* the actual ssid length in used */ + UCHAR LastSsidLen; /* the actual ssid length in used */ + CHAR LastSsid[MAX_LEN_OF_SSID]; /* NOT NULL-terminated */ UCHAR LastBssid[MAC_ADDR_LEN]; UCHAR Bssid[MAC_ADDR_LEN]; USHORT BeaconPeriod; UCHAR Channel; - UCHAR CentralChannel; // Central Channel when using 40MHz is indicating. not real channel. + UCHAR CentralChannel; /* Central Channel when using 40MHz is indicating. not real channel. */ UCHAR SupRate[MAX_LEN_OF_SUPPORTED_RATES]; UCHAR SupRateLen; UCHAR ExtRate[MAX_LEN_OF_SUPPORTED_RATES]; UCHAR ExtRateLen; - UCHAR DesireRate[MAX_LEN_OF_SUPPORTED_RATES]; // OID_802_11_DESIRED_RATES + UCHAR DesireRate[MAX_LEN_OF_SUPPORTED_RATES]; /* OID_802_11_DESIRED_RATES */ UCHAR MaxDesiredRate; UCHAR ExpectedACKRate[MAX_LEN_OF_SUPPORTED_RATES]; - ULONG BasicRateBitmap; // backup basic ratebitmap + ULONG BasicRateBitmap; /* backup basic ratebitmap */ BOOLEAN bAPSDCapable; BOOLEAN bInServicePeriod; @@ -1216,83 +1216,83 @@ typedef struct _COMMON_CONFIG { BOOLEAN bACMAPSDTr[4]; /* no use */ BOOLEAN bNeedSendTriggerFrame; - BOOLEAN bAPSDForcePowerSave; // Force power save mode, should only use in APSD-STAUT + BOOLEAN bAPSDForcePowerSave; /* Force power save mode, should only use in APSD-STAUT */ ULONG TriggerTimerCount; UCHAR MaxSPLength; - UCHAR BBPCurrentBW; // BW_10, BW_20, BW_40 - // move to MULTISSID_STRUCT for MBSS - //HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode;// For transmit phy setting in TXWI. - REG_TRANSMIT_SETTING RegTransmitSetting; //registry transmit setting. this is for reading registry setting only. not useful. - //UCHAR FixedTxMode; // Fixed Tx Mode (CCK, OFDM), for HT fixed tx mode (GF, MIX) , refer to RegTransmitSetting.field.HTMode - UCHAR TxRate; // Same value to fill in TXD. TxRate is 6-bit - UCHAR MaxTxRate; // RATE_1, RATE_2, RATE_5_5, RATE_11 - UCHAR TxRateIndex; // Tx rate index in RateSwitchTable - UCHAR TxRateTableSize; // Valid Tx rate table size in RateSwitchTable - //BOOLEAN bAutoTxRateSwitch; - UCHAR MinTxRate; // RATE_1, RATE_2, RATE_5_5, RATE_11 - UCHAR RtsRate; // RATE_xxx - HTTRANSMIT_SETTING MlmeTransmit; // MGMT frame PHY rate setting when operatin at Ht rate. - UCHAR MlmeRate; // RATE_xxx, used to send MLME frames - UCHAR BasicMlmeRate; // Default Rate for sending MLME frames - - USHORT RtsThreshold; // in unit of BYTE - USHORT FragmentThreshold; // in unit of BYTE - - UCHAR TxPower; // in unit of mW - ULONG TxPowerPercentage; // 0~100 % - ULONG TxPowerDefault; // keep for TxPowerPercentage + UCHAR BBPCurrentBW; /* BW_10, BW_20, BW_40 */ + /* move to MULTISSID_STRUCT for MBSS */ + /*HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode;// For transmit phy setting in TXWI. */ + REG_TRANSMIT_SETTING RegTransmitSetting; /*registry transmit setting. this is for reading registry setting only. not useful. */ + /*UCHAR FixedTxMode; // Fixed Tx Mode (CCK, OFDM), for HT fixed tx mode (GF, MIX) , refer to RegTransmitSetting.field.HTMode */ + UCHAR TxRate; /* Same value to fill in TXD. TxRate is 6-bit */ + UCHAR MaxTxRate; /* RATE_1, RATE_2, RATE_5_5, RATE_11 */ + UCHAR TxRateIndex; /* Tx rate index in RateSwitchTable */ + UCHAR TxRateTableSize; /* Valid Tx rate table size in RateSwitchTable */ + /*BOOLEAN bAutoTxRateSwitch; */ + UCHAR MinTxRate; /* RATE_1, RATE_2, RATE_5_5, RATE_11 */ + UCHAR RtsRate; /* RATE_xxx */ + HTTRANSMIT_SETTING MlmeTransmit; /* MGMT frame PHY rate setting when operatin at Ht rate. */ + UCHAR MlmeRate; /* RATE_xxx, used to send MLME frames */ + UCHAR BasicMlmeRate; /* Default Rate for sending MLME frames */ + + USHORT RtsThreshold; /* in unit of BYTE */ + USHORT FragmentThreshold; /* in unit of BYTE */ + + UCHAR TxPower; /* in unit of mW */ + ULONG TxPowerPercentage; /* 0~100 % */ + ULONG TxPowerDefault; /* keep for TxPowerPercentage */ UINT8 PwrConstraint; - BACAP_STRUC BACapability; // NO USE = 0XFF ; IMMED_BA =1 ; DELAY_BA=0 - BACAP_STRUC REGBACapability; // NO USE = 0XFF ; IMMED_BA =1 ; DELAY_BA=0 + BACAP_STRUC BACapability; /* NO USE = 0XFF ; IMMED_BA =1 ; DELAY_BA=0 */ + BACAP_STRUC REGBACapability; /* NO USE = 0XFF ; IMMED_BA =1 ; DELAY_BA=0 */ - IOT_STRUC IOTestParm; // 802.11n InterOpbility Test Parameter; - ULONG TxPreamble; // Rt802_11PreambleLong, Rt802_11PreambleShort, Rt802_11PreambleAuto - BOOLEAN bUseZeroToDisableFragment; // Microsoft use 0 as disable - ULONG UseBGProtection; // 0: auto, 1: always use, 2: always not use - BOOLEAN bUseShortSlotTime; // 0: disable, 1 - use short slot (9us) - BOOLEAN bEnableTxBurst; // 1: enble TX PACKET BURST (when BA is established or AP is not a legacy WMM AP), 0: disable TX PACKET BURST - BOOLEAN bAggregationCapable; // 1: enable TX aggregation when the peer supports it - BOOLEAN bPiggyBackCapable; // 1: enable TX piggy-back according MAC's version - BOOLEAN bIEEE80211H; // 1: enable IEEE802.11h spec. - ULONG DisableOLBCDetect; // 0: enable OLBC detect; 1 disable OLBC detect + IOT_STRUC IOTestParm; /* 802.11n InterOpbility Test Parameter; */ + ULONG TxPreamble; /* Rt802_11PreambleLong, Rt802_11PreambleShort, Rt802_11PreambleAuto */ + BOOLEAN bUseZeroToDisableFragment; /* Microsoft use 0 as disable */ + ULONG UseBGProtection; /* 0: auto, 1: always use, 2: always not use */ + BOOLEAN bUseShortSlotTime; /* 0: disable, 1 - use short slot (9us) */ + BOOLEAN bEnableTxBurst; /* 1: enble TX PACKET BURST (when BA is established or AP is not a legacy WMM AP), 0: disable TX PACKET BURST */ + BOOLEAN bAggregationCapable; /* 1: enable TX aggregation when the peer supports it */ + BOOLEAN bPiggyBackCapable; /* 1: enable TX piggy-back according MAC's version */ + BOOLEAN bIEEE80211H; /* 1: enable IEEE802.11h spec. */ + ULONG DisableOLBCDetect; /* 0: enable OLBC detect; 1 disable OLBC detect */ BOOLEAN bRdg; - BOOLEAN bWmmCapable; // 0:disable WMM, 1:enable WMM - QOS_CAPABILITY_PARM APQosCapability; // QOS capability of the current associated AP - EDCA_PARM APEdcaParm; // EDCA parameters of the current associated AP - QBSS_LOAD_PARM APQbssLoad; // QBSS load of the current associated AP - UCHAR AckPolicy[4]; // ACK policy of the specified AC. see ACK_xxx - BOOLEAN bDLSCapable; // 0:disable DLS, 1:enable DLS - // a bitmap of BOOLEAN flags. each bit represent an operation status of a particular - // BOOLEAN control, either ON or OFF. These flags should always be accessed via - // OPSTATUS_TEST_FLAG(), OPSTATUS_SET_FLAG(), OP_STATUS_CLEAR_FLAG() macros. - // see fOP_STATUS_xxx in RTMP_DEF.C for detail bit definition + BOOLEAN bWmmCapable; /* 0:disable WMM, 1:enable WMM */ + QOS_CAPABILITY_PARM APQosCapability; /* QOS capability of the current associated AP */ + EDCA_PARM APEdcaParm; /* EDCA parameters of the current associated AP */ + QBSS_LOAD_PARM APQbssLoad; /* QBSS load of the current associated AP */ + UCHAR AckPolicy[4]; /* ACK policy of the specified AC. see ACK_xxx */ + BOOLEAN bDLSCapable; /* 0:disable DLS, 1:enable DLS */ + /* a bitmap of BOOLEAN flags. each bit represent an operation status of a particular */ + /* BOOLEAN control, either ON or OFF. These flags should always be accessed via */ + /* OPSTATUS_TEST_FLAG(), OPSTATUS_SET_FLAG(), OP_STATUS_CLEAR_FLAG() macros. */ + /* see fOP_STATUS_xxx in RTMP_DEF.C for detail bit definition */ ULONG OpStatusFlags; - BOOLEAN NdisRadioStateOff; //For HCT 12.0, set this flag to TRUE instead of called MlmeRadioOff. - ABGBAND_STATE BandState; // For setting BBP used on B/G or A mode. + BOOLEAN NdisRadioStateOff; /*For HCT 12.0, set this flag to TRUE instead of called MlmeRadioOff. */ + ABGBAND_STATE BandState; /* For setting BBP used on B/G or A mode. */ - // IEEE802.11H--DFS. + /* IEEE802.11H--DFS. */ RADAR_DETECT_STRUCT RadarDetect; - // HT - UCHAR BASize; // USer desired BAWindowSize. Should not exceed our max capability - //RT_HT_CAPABILITY SupportedHtPhy; + /* HT */ + UCHAR BASize; /* USer desired BAWindowSize. Should not exceed our max capability */ + /*RT_HT_CAPABILITY SupportedHtPhy; */ RT_HT_CAPABILITY DesiredHtPhy; HT_CAPABILITY_IE HtCapability; - ADD_HT_INFO_IE AddHTInfo; // Useful as AP. - //This IE is used with channel switch announcement element when changing to a new 40MHz. - //This IE is included in channel switch ammouncement frames 7.4.1.5, beacons, probe Rsp. - NEW_EXT_CHAN_IE NewExtChanOffset; //7.3.2.20A, 1 if extension channel is above the control channel, 3 if below, 0 if not present + ADD_HT_INFO_IE AddHTInfo; /* Useful as AP. */ + /*This IE is used with channel switch announcement element when changing to a new 40MHz. */ + /*This IE is included in channel switch ammouncement frames 7.4.1.5, beacons, probe Rsp. */ + NEW_EXT_CHAN_IE NewExtChanOffset; /*7.3.2.20A, 1 if extension channel is above the control channel, 3 if below, 0 if not present */ BOOLEAN bHTProtect; BOOLEAN bMIMOPSEnable; BOOLEAN bBADecline; -//2008/11/05: KH add to support Antenna power-saving of AP<-- +/*2008/11/05: KH add to support Antenna power-saving of AP<-- */ BOOLEAN bGreenAPEnable; -//2008/11/05: KH add to support Antenna power-saving of AP--> +/*2008/11/05: KH add to support Antenna power-saving of AP--> */ BOOLEAN bDisableReordering; BOOLEAN bForty_Mhz_Intolerant; BOOLEAN bExtChannelSwitchAnnouncement; @@ -1301,19 +1301,19 @@ typedef struct _COMMON_CONFIG { UCHAR TxBASize; - // Enable wireless event + /* Enable wireless event */ BOOLEAN bWirelessEvent; - BOOLEAN bWiFiTest; // Enable this parameter for WiFi test + BOOLEAN bWiFiTest; /* Enable this parameter for WiFi test */ - // Tx & Rx Stream number selection + /* Tx & Rx Stream number selection */ UCHAR TxStream; UCHAR RxStream; - BOOLEAN bHardwareRadio; // Hardware controlled Radio enabled + BOOLEAN bHardwareRadio; /* Hardware controlled Radio enabled */ #ifdef RTMP_MAC_USB - BOOLEAN bMultipleIRP; // Multiple Bulk IN flag - UCHAR NumOfBulkInIRP; // if bMultipleIRP == TRUE, NumOfBulkInIRP will be 4 otherwise be 1 + BOOLEAN bMultipleIRP; /* Multiple Bulk IN flag */ + UCHAR NumOfBulkInIRP; /* if bMultipleIRP == TRUE, NumOfBulkInIRP will be 4 otherwise be 1 */ RT_HT_CAPABILITY SupportedHtPhy; ULONG MaxPktOneTxBulk; UCHAR TxBulkFactor; @@ -1325,7 +1325,7 @@ typedef struct _COMMON_CONFIG { UINT32 BeaconAdjust; UINT32 BeaconFactor; UINT32 BeaconRemain; -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ NDIS_SPIN_LOCK MeasureReqTabLock; PMEASURE_REQ_TAB pMeasureReqTab; @@ -1333,10 +1333,10 @@ typedef struct _COMMON_CONFIG { NDIS_SPIN_LOCK TpcReqTabLock; PTPC_REQ_TAB pTpcReqTab; - BOOLEAN PSPXlink; // 0: Disable. 1: Enable + BOOLEAN PSPXlink; /* 0: Disable. 1: Enable */ #if defined(RT305x)||defined(RT30xx) - // request by Gary, for High Power issue + /* request by Gary, for High Power issue */ UCHAR HighPowerPatchDisabled; #endif @@ -1344,33 +1344,33 @@ typedef struct _COMMON_CONFIG { } COMMON_CONFIG, *PCOMMON_CONFIG; /* Modified by Wu Xi-Kun 4/21/2006 */ -// STA configuration and status +/* STA configuration and status */ typedef struct _STA_ADMIN_CONFIG { - // GROUP 1 - - // User configuration loaded from Registry, E2PROM or OID_xxx. These settings describe - // the user intended configuration, but not necessary fully equal to the final - // settings in ACTIVE BSS after negotiation/compromize with the BSS holder (either - // AP or IBSS holder). - // Once initialized, user configuration can only be changed via OID_xxx - UCHAR BssType; // BSS_INFRA or BSS_ADHOC - USHORT AtimWin; // used when starting a new IBSS - - // GROUP 2 - - // User configuration loaded from Registry, E2PROM or OID_xxx. These settings describe - // the user intended configuration, and should be always applied to the final - // settings in ACTIVE BSS without compromising with the BSS holder. - // Once initialized, user configuration can only be changed via OID_xxx + /* GROUP 1 - */ + /* User configuration loaded from Registry, E2PROM or OID_xxx. These settings describe */ + /* the user intended configuration, but not necessary fully equal to the final */ + /* settings in ACTIVE BSS after negotiation/compromize with the BSS holder (either */ + /* AP or IBSS holder). */ + /* Once initialized, user configuration can only be changed via OID_xxx */ + UCHAR BssType; /* BSS_INFRA or BSS_ADHOC */ + USHORT AtimWin; /* used when starting a new IBSS */ + + /* GROUP 2 - */ + /* User configuration loaded from Registry, E2PROM or OID_xxx. These settings describe */ + /* the user intended configuration, and should be always applied to the final */ + /* settings in ACTIVE BSS without compromising with the BSS holder. */ + /* Once initialized, user configuration can only be changed via OID_xxx */ UCHAR RssiTrigger; - UCHAR RssiTriggerMode; // RSSI_TRIGGERED_UPON_BELOW_THRESHOLD or RSSI_TRIGGERED_UPON_EXCCEED_THRESHOLD - USHORT DefaultListenCount; // default listen count; - ULONG WindowsPowerMode; // Power mode for AC power - ULONG WindowsBatteryPowerMode; // Power mode for battery if exists - BOOLEAN bWindowsACCAMEnable; // Enable CAM power mode when AC on - BOOLEAN bAutoReconnect; // Set to TRUE when setting OID_802_11_SSID with no matching BSSID - ULONG WindowsPowerProfile; // Windows power profile, for NDIS5.1 PnP + UCHAR RssiTriggerMode; /* RSSI_TRIGGERED_UPON_BELOW_THRESHOLD or RSSI_TRIGGERED_UPON_EXCCEED_THRESHOLD */ + USHORT DefaultListenCount; /* default listen count; */ + ULONG WindowsPowerMode; /* Power mode for AC power */ + ULONG WindowsBatteryPowerMode; /* Power mode for battery if exists */ + BOOLEAN bWindowsACCAMEnable; /* Enable CAM power mode when AC on */ + BOOLEAN bAutoReconnect; /* Set to TRUE when setting OID_802_11_SSID with no matching BSSID */ + ULONG WindowsPowerProfile; /* Windows power profile, for NDIS5.1 PnP */ - // MIB:ieee802dot11.dot11smt(1).dot11StationConfigTable(1) - USHORT Psm; // power management mode (PWR_ACTIVE|PWR_SAVE) + /* MIB:ieee802dot11.dot11smt(1).dot11StationConfigTable(1) */ + USHORT Psm; /* power management mode (PWR_ACTIVE|PWR_SAVE) */ USHORT DisassocReason; UCHAR DisassocSta[MAC_ADDR_LEN]; USHORT DeauthReason; @@ -1378,109 +1378,109 @@ typedef struct _STA_ADMIN_CONFIG { USHORT AuthFailReason; UCHAR AuthFailSta[MAC_ADDR_LEN]; - NDIS_802_11_PRIVACY_FILTER PrivacyFilter; // PrivacyFilter enum for 802.1X - NDIS_802_11_AUTHENTICATION_MODE AuthMode; // This should match to whatever microsoft defined + NDIS_802_11_PRIVACY_FILTER PrivacyFilter; /* PrivacyFilter enum for 802.1X */ + NDIS_802_11_AUTHENTICATION_MODE AuthMode; /* This should match to whatever microsoft defined */ NDIS_802_11_WEP_STATUS WepStatus; - NDIS_802_11_WEP_STATUS OrigWepStatus; // Original wep status set from OID + NDIS_802_11_WEP_STATUS OrigWepStatus; /* Original wep status set from OID */ - // Add to support different cipher suite for WPA2/WPA mode - NDIS_802_11_ENCRYPTION_STATUS GroupCipher; // Multicast cipher suite - NDIS_802_11_ENCRYPTION_STATUS PairCipher; // Unicast cipher suite - BOOLEAN bMixCipher; // Indicate current Pair & Group use different cipher suites + /* Add to support different cipher suite for WPA2/WPA mode */ + NDIS_802_11_ENCRYPTION_STATUS GroupCipher; /* Multicast cipher suite */ + NDIS_802_11_ENCRYPTION_STATUS PairCipher; /* Unicast cipher suite */ + BOOLEAN bMixCipher; /* Indicate current Pair & Group use different cipher suites */ USHORT RsnCapability; NDIS_802_11_WEP_STATUS GroupKeyWepStatus; - UCHAR WpaPassPhrase[64]; // WPA PSK pass phrase - UINT WpaPassPhraseLen; // the length of WPA PSK pass phrase - UCHAR PMK[32]; // WPA PSK mode PMK - UCHAR PTK[64]; // WPA PSK mode PTK - UCHAR GTK[32]; // GTK from authenticator + UCHAR WpaPassPhrase[64]; /* WPA PSK pass phrase */ + UINT WpaPassPhraseLen; /* the length of WPA PSK pass phrase */ + UCHAR PMK[32]; /* WPA PSK mode PMK */ + UCHAR PTK[64]; /* WPA PSK mode PTK */ + UCHAR GTK[32]; /* GTK from authenticator */ BSSID_INFO SavedPMK[PMKID_NO]; - UINT SavedPMKNum; // Saved PMKID number + UINT SavedPMKNum; /* Saved PMKID number */ UCHAR DefaultKeyId; - // WPA 802.1x port control, WPA_802_1X_PORT_SECURED, WPA_802_1X_PORT_NOT_SECURED + /* WPA 802.1x port control, WPA_802_1X_PORT_SECURED, WPA_802_1X_PORT_NOT_SECURED */ UCHAR PortSecured; - // For WPA countermeasures - ULONG LastMicErrorTime; // record last MIC error time - ULONG MicErrCnt; // Should be 0, 1, 2, then reset to zero (after disassoiciation). - BOOLEAN bBlockAssoc; // Block associate attempt for 60 seconds after counter measure occurred. - // For WPA-PSK supplicant state - WPA_STATE WpaState; // Default is SS_NOTUSE and handled by microsoft 802.1x + /* For WPA countermeasures */ + ULONG LastMicErrorTime; /* record last MIC error time */ + ULONG MicErrCnt; /* Should be 0, 1, 2, then reset to zero (after disassoiciation). */ + BOOLEAN bBlockAssoc; /* Block associate attempt for 60 seconds after counter measure occurred. */ + /* For WPA-PSK supplicant state */ + WPA_STATE WpaState; /* Default is SS_NOTUSE and handled by microsoft 802.1x */ UCHAR ReplayCounter[8]; - UCHAR ANonce[32]; // ANonce for WPA-PSK from aurhenticator - UCHAR SNonce[32]; // SNonce for WPA-PSK + UCHAR ANonce[32]; /* ANonce for WPA-PSK from aurhenticator */ + UCHAR SNonce[32]; /* SNonce for WPA-PSK */ - UCHAR LastSNR0; // last received BEACON's SNR - UCHAR LastSNR1; // last received BEACON's SNR for 2nd antenna + UCHAR LastSNR0; /* last received BEACON's SNR */ + UCHAR LastSNR1; /* last received BEACON's SNR for 2nd antenna */ RSSI_SAMPLE RssiSample; ULONG NumOfAvgRssiSample; - ULONG LastBeaconRxTime; // OS's timestamp of the last BEACON RX time - ULONG Last11bBeaconRxTime; // OS's timestamp of the last 11B BEACON RX time - ULONG Last11gBeaconRxTime; // OS's timestamp of the last 11G BEACON RX time - ULONG Last20NBeaconRxTime; // OS's timestamp of the last 20MHz N BEACON RX time - - ULONG LastScanTime; // Record last scan time for issue BSSID_SCAN_LIST - ULONG ScanCnt; // Scan counts since most recent SSID, BSSID, SCAN OID request - BOOLEAN bSwRadio; // Software controlled Radio On/Off, TRUE: On - BOOLEAN bHwRadio; // Hardware controlled Radio On/Off, TRUE: On - BOOLEAN bRadio; // Radio state, And of Sw & Hw radio state - BOOLEAN bHardwareRadio; // Hardware controlled Radio enabled - BOOLEAN bShowHiddenSSID; // Show all known SSID in SSID list get operation + ULONG LastBeaconRxTime; /* OS's timestamp of the last BEACON RX time */ + ULONG Last11bBeaconRxTime; /* OS's timestamp of the last 11B BEACON RX time */ + ULONG Last11gBeaconRxTime; /* OS's timestamp of the last 11G BEACON RX time */ + ULONG Last20NBeaconRxTime; /* OS's timestamp of the last 20MHz N BEACON RX time */ + + ULONG LastScanTime; /* Record last scan time for issue BSSID_SCAN_LIST */ + ULONG ScanCnt; /* Scan counts since most recent SSID, BSSID, SCAN OID request */ + BOOLEAN bSwRadio; /* Software controlled Radio On/Off, TRUE: On */ + BOOLEAN bHwRadio; /* Hardware controlled Radio On/Off, TRUE: On */ + BOOLEAN bRadio; /* Radio state, And of Sw & Hw radio state */ + BOOLEAN bHardwareRadio; /* Hardware controlled Radio enabled */ + BOOLEAN bShowHiddenSSID; /* Show all known SSID in SSID list get operation */ - // New for WPA, windows want us to keep association information and - // Fixed IEs from last association response + /* New for WPA, windows want us to keep association information and */ + /* Fixed IEs from last association response */ NDIS_802_11_ASSOCIATION_INFORMATION AssocInfo; - USHORT ReqVarIELen; // Length of next VIE include EID & Length - UCHAR ReqVarIEs[MAX_VIE_LEN]; // The content saved here should be little-endian format. - USHORT ResVarIELen; // Length of next VIE include EID & Length + USHORT ReqVarIELen; /* Length of next VIE include EID & Length */ + UCHAR ReqVarIEs[MAX_VIE_LEN]; /* The content saved here should be little-endian format. */ + USHORT ResVarIELen; /* Length of next VIE include EID & Length */ UCHAR ResVarIEs[MAX_VIE_LEN]; UCHAR RSNIE_Len; - UCHAR RSN_IE[MAX_LEN_OF_RSNIE]; // The content saved here should be little-endian format. + UCHAR RSN_IE[MAX_LEN_OF_RSNIE]; /* The content saved here should be little-endian format. */ - ULONG CLBusyBytes; // Save the total bytes received durning channel load scan time - USHORT RPIDensity[8]; // Array for RPI density collection + ULONG CLBusyBytes; /* Save the total bytes received durning channel load scan time */ + USHORT RPIDensity[8]; /* Array for RPI density collection */ - UCHAR RMReqCnt; // Number of measurement request saved. - UCHAR CurrentRMReqIdx; // Number of measurement request saved. - BOOLEAN ParallelReq; // Parallel measurement, only one request performed, - // It must be the same channel with maximum duration - USHORT ParallelDuration; // Maximum duration for parallel measurement - UCHAR ParallelChannel; // Only one channel with parallel measurement - USHORT IAPPToken; // IAPP dialog token - // Hack for channel load and noise histogram parameters - UCHAR NHFactor; // Parameter for Noise histogram - UCHAR CLFactor; // Parameter for channel load + UCHAR RMReqCnt; /* Number of measurement request saved. */ + UCHAR CurrentRMReqIdx; /* Number of measurement request saved. */ + BOOLEAN ParallelReq; /* Parallel measurement, only one request performed, */ + /* It must be the same channel with maximum duration */ + USHORT ParallelDuration; /* Maximum duration for parallel measurement */ + UCHAR ParallelChannel; /* Only one channel with parallel measurement */ + USHORT IAPPToken; /* IAPP dialog token */ + /* Hack for channel load and noise histogram parameters */ + UCHAR NHFactor; /* Parameter for Noise histogram */ + UCHAR CLFactor; /* Parameter for channel load */ RALINK_TIMER_STRUCT StaQuickResponeForRateUpTimer; BOOLEAN StaQuickResponeForRateUpTimerRunning; - UCHAR DtimCount; // 0.. DtimPeriod-1 - UCHAR DtimPeriod; // default = 3 + UCHAR DtimCount; /* 0.. DtimPeriod-1 */ + UCHAR DtimPeriod; /* default = 3 */ - //////////////////////////////////////////////////////////////////////////////////////// - // This is only for WHQL test. + /*////////////////////////////////////////////////////////////////////////////////////// */ + /* This is only for WHQL test. */ BOOLEAN WhqlTest; - //////////////////////////////////////////////////////////////////////////////////////// + /*////////////////////////////////////////////////////////////////////////////////////// */ RALINK_TIMER_STRUCT WpaDisassocAndBlockAssocTimer; - // Fast Roaming - BOOLEAN bAutoRoaming; // 0:disable auto roaming by RSSI, 1:enable auto roaming by RSSI - CHAR dBmToRoam; // the condition to roam when receiving Rssi less than this value. It's negative value. + /* Fast Roaming */ + BOOLEAN bAutoRoaming; /* 0:disable auto roaming by RSSI, 1:enable auto roaming by RSSI */ + CHAR dBmToRoam; /* the condition to roam when receiving Rssi less than this value. It's negative value. */ BOOLEAN IEEE8021X; BOOLEAN IEEE8021x_required_keys; - CIPHER_KEY DesireSharedKey[4]; // Record user desired WEP keys + CIPHER_KEY DesireSharedKey[4]; /* Record user desired WEP keys */ UCHAR DesireSharedKeyId; - // 0: driver ignores wpa_supplicant - // 1: wpa_supplicant initiates scanning and AP selection - // 2: driver takes care of scanning, AP selection, and IEEE 802.11 association parameters + /* 0: driver ignores wpa_supplicant */ + /* 1: wpa_supplicant initiates scanning and AP selection */ + /* 2: driver takes care of scanning, AP selection, and IEEE 802.11 association parameters */ UCHAR WpaSupplicantUP; UCHAR WpaSupplicantScanCount; BOOLEAN bRSN_IE_FromWpaSupplicant; @@ -1491,63 +1491,63 @@ typedef struct _STA_ADMIN_CONFIG { BOOLEAN bTGnWifiTest; BOOLEAN bScanReqIsFromWebUI; - HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode; // For transmit phy setting in TXWI. + HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode; /* For transmit phy setting in TXWI. */ DESIRED_TRANSMIT_SETTING DesiredTransmitSetting; RT_HT_PHY_INFO DesiredHtPhyInfo; BOOLEAN bAutoTxRateSwitch; #ifdef RTMP_MAC_PCI UCHAR BBPR3; - // PS Control has 2 meanings for advanced power save function. - // 1. EnablePSinIdle : When no connection, always radio off except need to do site survey. - // 2. EnableNewPS : will save more current in sleep or radio off mode. + /* PS Control has 2 meanings for advanced power save function. */ + /* 1. EnablePSinIdle : When no connection, always radio off except need to do site survey. */ + /* 2. EnableNewPS : will save more current in sleep or radio off mode. */ PS_CONTROL PSControl; -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ BOOLEAN bAutoConnectByBssid; - ULONG BeaconLostTime; // seconds - BOOLEAN bForceTxBurst; // 1: force enble TX PACKET BURST, 0: disable + ULONG BeaconLostTime; /* seconds */ + BOOLEAN bForceTxBurst; /* 1: force enble TX PACKET BURST, 0: disable */ } STA_ADMIN_CONFIG, *PSTA_ADMIN_CONFIG; -// This data structure keep the current active BSS/IBSS's configuration that this STA -// had agreed upon joining the network. Which means these parameters are usually decided -// by the BSS/IBSS creator instead of user configuration. Data in this data structurre -// is valid only when either ADHOC_ON(pAd) or INFRA_ON(pAd) is TRUE. -// Normally, after SCAN or failed roaming attempts, we need to recover back to -// the current active settings. +/* This data structure keep the current active BSS/IBSS's configuration that this STA */ +/* had agreed upon joining the network. Which means these parameters are usually decided */ +/* by the BSS/IBSS creator instead of user configuration. Data in this data structurre */ +/* is valid only when either ADHOC_ON(pAd) or INFRA_ON(pAd) is TRUE. */ +/* Normally, after SCAN or failed roaming attempts, we need to recover back to */ +/* the current active settings. */ typedef struct _STA_ACTIVE_CONFIG { USHORT Aid; - USHORT AtimWin; // in kusec; IBSS parameter set element + USHORT AtimWin; /* in kusec; IBSS parameter set element */ USHORT CapabilityInfo; USHORT CfpMaxDuration; USHORT CfpPeriod; - // Copy supported rate from desired AP's beacon. We are trying to match - // AP's supported and extended rate settings. + /* Copy supported rate from desired AP's beacon. We are trying to match */ + /* AP's supported and extended rate settings. */ UCHAR SupRate[MAX_LEN_OF_SUPPORTED_RATES]; UCHAR ExtRate[MAX_LEN_OF_SUPPORTED_RATES]; UCHAR SupRateLen; UCHAR ExtRateLen; - // Copy supported ht from desired AP's beacon. We are trying to match + /* Copy supported ht from desired AP's beacon. We are trying to match */ RT_HT_PHY_INFO SupportedPhyInfo; RT_HT_CAPABILITY SupportedHtPhy; } STA_ACTIVE_CONFIG, *PSTA_ACTIVE_CONFIG; typedef struct _MAC_TABLE_ENTRY { - //Choose 1 from ValidAsWDS and ValidAsCLI to validize. - BOOLEAN ValidAsCLI; // Sta mode, set this TRUE after Linkup,too. - BOOLEAN ValidAsWDS; // This is WDS Entry. only for AP mode. - BOOLEAN ValidAsApCli; //This is a AP-Client entry, only for AP mode which enable AP-Client functions. + /*Choose 1 from ValidAsWDS and ValidAsCLI to validize. */ + BOOLEAN ValidAsCLI; /* Sta mode, set this TRUE after Linkup,too. */ + BOOLEAN ValidAsWDS; /* This is WDS Entry. only for AP mode. */ + BOOLEAN ValidAsApCli; /*This is a AP-Client entry, only for AP mode which enable AP-Client functions. */ BOOLEAN ValidAsMesh; - BOOLEAN ValidAsDls; // This is DLS Entry. only for STA mode. + BOOLEAN ValidAsDls; /* This is DLS Entry. only for STA mode. */ BOOLEAN isCached; - BOOLEAN bIAmBadAtheros; // Flag if this is Atheros chip that has IOT problem. We need to turn on RTS/CTS protection. + BOOLEAN bIAmBadAtheros; /* Flag if this is Atheros chip that has IOT problem. We need to turn on RTS/CTS protection. */ - UCHAR EnqueueEapolStartTimerRunning; // Enqueue EAPoL-Start for triggering EAP SM - //jan for wpa - // record which entry revoke MIC Failure , if it leaves the BSS itself, AP won't update aMICFailTime MIB + UCHAR EnqueueEapolStartTimerRunning; /* Enqueue EAPoL-Start for triggering EAP SM */ + /*jan for wpa */ + /* record which entry revoke MIC Failure , if it leaves the BSS itself, AP won't update aMICFailTime MIB */ UCHAR CMTimerRunning; - UCHAR apidx; // MBSS number + UCHAR apidx; /* MBSS number */ UCHAR RSNIE_Len; UCHAR RSN_IE[MAX_LEN_OF_RSNIE]; UCHAR ANonce[LEN_KEY_DESC_NONCE]; @@ -1556,14 +1556,14 @@ typedef struct _MAC_TABLE_ENTRY { UCHAR PTK[64]; UCHAR ReTryCounter; RALINK_TIMER_STRUCT RetryTimer; - RALINK_TIMER_STRUCT EnqueueStartForPSKTimer; // A timer which enqueue EAPoL-Start for triggering PSK SM - NDIS_802_11_AUTHENTICATION_MODE AuthMode; // This should match to whatever microsoft defined + RALINK_TIMER_STRUCT EnqueueStartForPSKTimer; /* A timer which enqueue EAPoL-Start for triggering PSK SM */ + NDIS_802_11_AUTHENTICATION_MODE AuthMode; /* This should match to whatever microsoft defined */ NDIS_802_11_WEP_STATUS WepStatus; NDIS_802_11_WEP_STATUS GroupKeyWepStatus; AP_WPA_STATE WpaState; GTK_STATE GTKState; USHORT PortSecured; - NDIS_802_11_PRIVACY_FILTER PrivacyFilter; // PrivacyFilter enum for 802.1X + NDIS_802_11_PRIVACY_FILTER PrivacyFilter; /* PrivacyFilter enum for 802.1X */ CIPHER_KEY PairwiseKey; PVOID pAd; INT PMKID_CacheIdx; @@ -1572,75 +1572,75 @@ typedef struct _MAC_TABLE_ENTRY { UCHAR Addr[MAC_ADDR_LEN]; UCHAR PsMode; SST Sst; - AUTH_STATE AuthState; // for SHARED KEY authentication state machine used only - BOOLEAN IsReassocSta; // Indicate whether this is a reassociation procedure + AUTH_STATE AuthState; /* for SHARED KEY authentication state machine used only */ + BOOLEAN IsReassocSta; /* Indicate whether this is a reassociation procedure */ USHORT Aid; USHORT CapabilityInfo; UCHAR LastRssi; ULONG NoDataIdleCount; - UINT16 StationKeepAliveCount; // unit: second + UINT16 StationKeepAliveCount; /* unit: second */ ULONG PsQIdleCount; QUEUE_HEADER PsQueue; - UINT32 StaConnectTime; // the live time of this station since associated with AP + UINT32 StaConnectTime; /* the live time of this station since associated with AP */ BOOLEAN bSendBAR; USHORT NoBADataCountDown; - UINT32 CachedBuf[16]; // UINT (4 bytes) for alignment - UINT TxBFCount; // 3*3 + UINT32 CachedBuf[16]; /* UINT (4 bytes) for alignment */ + UINT TxBFCount; /* 3*3 */ UINT FIFOCount; UINT DebugFIFOCount; UINT DebugTxCount; BOOLEAN bDlsInit; -//==================================================== -//WDS entry needs these -// if ValidAsWDS==TRUE, MatchWDSTabIdx is the index in WdsTab.MacTab +/*==================================================== */ +/*WDS entry needs these */ +/* if ValidAsWDS==TRUE, MatchWDSTabIdx is the index in WdsTab.MacTab */ UINT MatchWDSTabIdx; UCHAR MaxSupportedRate; UCHAR CurrTxRate; UCHAR CurrTxRateIndex; - // to record the each TX rate's quality. 0 is best, the bigger the worse. + /* to record the each TX rate's quality. 0 is best, the bigger the worse. */ USHORT TxQuality[MAX_STEP_OF_TX_RATE_SWITCH]; -// USHORT OneSecTxOkCount; +/* USHORT OneSecTxOkCount; */ UINT32 OneSecTxNoRetryOkCount; UINT32 OneSecTxRetryOkCount; UINT32 OneSecTxFailCount; UINT32 ContinueTxFailCnt; - UINT32 CurrTxRateStableTime; // # of second in current TX rate - UCHAR TxRateUpPenalty; // extra # of second penalty due to last unstable condition -//==================================================== + UINT32 CurrTxRateStableTime; /* # of second in current TX rate */ + UCHAR TxRateUpPenalty; /* extra # of second penalty due to last unstable condition */ +/*==================================================== */ BOOLEAN fNoisyEnvironment; BOOLEAN fLastSecAccordingRSSI; - UCHAR LastSecTxRateChangeAction; // 0: no change, 1:rate UP, 2:rate down - CHAR LastTimeTxRateChangeAction; //Keep last time value of LastSecTxRateChangeAction + UCHAR LastSecTxRateChangeAction; /* 0: no change, 1:rate UP, 2:rate down */ + CHAR LastTimeTxRateChangeAction; /*Keep last time value of LastSecTxRateChangeAction */ ULONG LastTxOkCount; UCHAR PER[MAX_STEP_OF_TX_RATE_SWITCH]; - // a bitmap of BOOLEAN flags. each bit represent an operation status of a particular - // BOOLEAN control, either ON or OFF. These flags should always be accessed via - // CLIENT_STATUS_TEST_FLAG(), CLIENT_STATUS_SET_FLAG(), CLIENT_STATUS_CLEAR_FLAG() macros. - // see fOP_STATUS_xxx in RTMP_DEF.C for detail bit definition. fCLIENT_STATUS_AMSDU_INUSED + /* a bitmap of BOOLEAN flags. each bit represent an operation status of a particular */ + /* BOOLEAN control, either ON or OFF. These flags should always be accessed via */ + /* CLIENT_STATUS_TEST_FLAG(), CLIENT_STATUS_SET_FLAG(), CLIENT_STATUS_CLEAR_FLAG() macros. */ + /* see fOP_STATUS_xxx in RTMP_DEF.C for detail bit definition. fCLIENT_STATUS_AMSDU_INUSED */ ULONG ClientStatusFlags; - HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode; // For transmit phy setting in TXWI. + HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode; /* For transmit phy setting in TXWI. */ - // HT EWC MIMO-N used parameters - USHORT RXBAbitmap; // fill to on-chip RXWI_BA_BITMASK in 8.1.3RX attribute entry format - USHORT TXBAbitmap; // This bitmap as originator, only keep in software used to mark AMPDU bit in TXWI + /* HT EWC MIMO-N used parameters */ + USHORT RXBAbitmap; /* fill to on-chip RXWI_BA_BITMASK in 8.1.3RX attribute entry format */ + USHORT TXBAbitmap; /* This bitmap as originator, only keep in software used to mark AMPDU bit in TXWI */ USHORT TXAutoBAbitmap; USHORT BADeclineBitmap; - USHORT BARecWcidArray[NUM_OF_TID]; // The mapping wcid of recipient session. if RXBAbitmap bit is masked - USHORT BAOriWcidArray[NUM_OF_TID]; // The mapping wcid of originator session. if TXBAbitmap bit is masked - USHORT BAOriSequence[NUM_OF_TID]; // The mapping wcid of originator session. if TXBAbitmap bit is masked + USHORT BARecWcidArray[NUM_OF_TID]; /* The mapping wcid of recipient session. if RXBAbitmap bit is masked */ + USHORT BAOriWcidArray[NUM_OF_TID]; /* The mapping wcid of originator session. if TXBAbitmap bit is masked */ + USHORT BAOriSequence[NUM_OF_TID]; /* The mapping wcid of originator session. if TXBAbitmap bit is masked */ - // 802.11n features. + /* 802.11n features. */ UCHAR MpduDensity; UCHAR MaxRAmpduFactor; UCHAR AMsduSize; - UCHAR MmpsMode; // MIMO power save more. + UCHAR MmpsMode; /* MIMO power save more. */ HT_CAPABILITY_IE HTCapability; @@ -1670,16 +1670,16 @@ typedef struct _MAC_TABLE { QUEUE_HEADER McastPsQueue; ULONG PsQIdleCount; BOOLEAN fAnyStationInPsm; - BOOLEAN fAnyStationBadAtheros; // Check if any Station is atheros 802.11n Chip. We need to use RTS/CTS with Atheros 802,.11n chip. - BOOLEAN fAnyTxOPForceDisable; // Check if it is necessary to disable BE TxOP - BOOLEAN fAllStationAsRalink; // Check if all stations are ralink-chipset - BOOLEAN fAnyStationIsLegacy; // Check if I use legacy rate to transmit to my BSS Station/ - BOOLEAN fAnyStationNonGF; // Check if any Station can't support GF. - BOOLEAN fAnyStation20Only; // Check if any Station can't support GF. - BOOLEAN fAnyStationMIMOPSDynamic; // Check if any Station is MIMO Dynamic - BOOLEAN fAnyBASession; // Check if there is BA session. Force turn on RTS/CTS -//2008/10/28: KH add to support Antenna power-saving of AP<-- -//2008/10/28: KH add to support Antenna power-saving of AP--> + BOOLEAN fAnyStationBadAtheros; /* Check if any Station is atheros 802.11n Chip. We need to use RTS/CTS with Atheros 802,.11n chip. */ + BOOLEAN fAnyTxOPForceDisable; /* Check if it is necessary to disable BE TxOP */ + BOOLEAN fAllStationAsRalink; /* Check if all stations are ralink-chipset */ + BOOLEAN fAnyStationIsLegacy; /* Check if I use legacy rate to transmit to my BSS Station/ */ + BOOLEAN fAnyStationNonGF; /* Check if any Station can't support GF. */ + BOOLEAN fAnyStation20Only; /* Check if any Station can't support GF. */ + BOOLEAN fAnyStationMIMOPSDynamic; /* Check if any Station is MIMO Dynamic */ + BOOLEAN fAnyBASession; /* Check if there is BA session. Force turn on RTS/CTS */ +/*2008/10/28: KH add to support Antenna power-saving of AP<-- */ +/*2008/10/28: KH add to support Antenna power-saving of AP--> */ } MAC_TABLE, *PMAC_TABLE; struct wificonf { @@ -1711,11 +1711,11 @@ struct _RTMP_CHIP_OP_ { void (*AsicHaltAction) (RTMP_ADAPTER * pAd); }; -// -// The miniport adapter structure -// +/* */ +/* The miniport adapter structure */ +/* */ struct _RTMP_ADAPTER { - PVOID OS_Cookie; // save specific structure relative to OS + PVOID OS_Cookie; /* save specific structure relative to OS */ PNET_DEV net_dev; ULONG VirtualIfCnt; @@ -1726,7 +1726,7 @@ struct _RTMP_ADAPTER { /*****************************************************************************************/ /* PCI related parameters */ /*****************************************************************************************/ - PUCHAR CSRBaseAddress; // PCI MMIO Base Address, all access will use + PUCHAR CSRBaseAddress; /* PCI MMIO Base Address, all access will use */ unsigned int irq_num; USHORT LnkCtrlBitMask; @@ -1735,26 +1735,26 @@ struct _RTMP_ADAPTER { USHORT HostLnkCtrlConfiguration; USHORT HostLnkCtrlOffset; USHORT PCIePowerSaveLevel; - ULONG Rt3xxHostLinkCtrl; // USed for 3090F chip - ULONG Rt3xxRalinkLinkCtrl; // USed for 3090F chip - USHORT DeviceID; // Read from PCI config + ULONG Rt3xxHostLinkCtrl; /* USed for 3090F chip */ + ULONG Rt3xxRalinkLinkCtrl; /* USed for 3090F chip */ + USHORT DeviceID; /* Read from PCI config */ ULONG AccessBBPFailCount; - BOOLEAN bPCIclkOff; // flag that indicate if the PICE power status in Configuration SPace.. - BOOLEAN bPCIclkOffDisableTx; // + BOOLEAN bPCIclkOff; /* flag that indicate if the PICE power status in Configuration SPace.. */ + BOOLEAN bPCIclkOffDisableTx; /* */ - BOOLEAN brt30xxBanMcuCmd; //when = 0xff means all commands are ok to set . - BOOLEAN b3090ESpecialChip; //3090E special chip that write EEPROM 0x24=0x9280. - ULONG CheckDmaBusyCount; // Check Interrupt Status Register Count. + BOOLEAN brt30xxBanMcuCmd; /*when = 0xff means all commands are ok to set . */ + BOOLEAN b3090ESpecialChip; /*3090E special chip that write EEPROM 0x24=0x9280. */ + ULONG CheckDmaBusyCount; /* Check Interrupt Status Register Count. */ UINT int_enable_reg; UINT int_disable_mask; UINT int_pending; - RTMP_DMABUF TxBufSpace[NUM_OF_TX_RING]; // Shared memory of all 1st pre-allocated TxBuf associated with each TXD - RTMP_DMABUF RxDescRing; // Shared memory for RX descriptors - RTMP_DMABUF TxDescRing[NUM_OF_TX_RING]; // Shared memory for Tx descriptors - RTMP_TX_RING TxRing[NUM_OF_TX_RING]; // AC0~4 + HCCA -#endif // RTMP_MAC_PCI // + RTMP_DMABUF TxBufSpace[NUM_OF_TX_RING]; /* Shared memory of all 1st pre-allocated TxBuf associated with each TXD */ + RTMP_DMABUF RxDescRing; /* Shared memory for RX descriptors */ + RTMP_DMABUF TxDescRing[NUM_OF_TX_RING]; /* Shared memory for Tx descriptors */ + RTMP_TX_RING TxRing[NUM_OF_TX_RING]; /* AC0~4 + HCCA */ +#endif /* RTMP_MAC_PCI // */ NDIS_SPIN_LOCK irq_lock; UCHAR irq_disabled; @@ -1764,28 +1764,28 @@ struct _RTMP_ADAPTER { /* USB related parameters */ /*****************************************************************************************/ struct usb_config_descriptor *config; - UINT BulkInEpAddr; // bulk-in endpoint address - UINT BulkOutEpAddr[6]; // bulk-out endpoint address + UINT BulkInEpAddr; /* bulk-in endpoint address */ + UINT BulkOutEpAddr[6]; /* bulk-out endpoint address */ UINT NumberOfPipes; USHORT BulkOutMaxPacketSize; USHORT BulkInMaxPacketSize; - //======Control Flags + /*======Control Flags */ LONG PendingIoCount; ULONG BulkFlags; - BOOLEAN bUsbTxBulkAggre; // Flags for bulk out data priority + BOOLEAN bUsbTxBulkAggre; /* Flags for bulk out data priority */ - //======Cmd Thread + /*======Cmd Thread */ CmdQ CmdQ; - NDIS_SPIN_LOCK CmdQLock; // CmdQLock spinlock + NDIS_SPIN_LOCK CmdQLock; /* CmdQLock spinlock */ RTMP_OS_TASK cmdQTask; - //======Semaphores (event) + /*======Semaphores (event) */ RTMP_OS_SEM UsbVendorReq_semaphore; PVOID UsbVendorReqBuf; wait_queue_head_t *wait; -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ /*****************************************************************************************/ /* RBUS related parameters */ @@ -1794,7 +1794,7 @@ struct _RTMP_ADAPTER { /*****************************************************************************************/ /* Both PCI/USB related parameters */ /*****************************************************************************************/ - //RTMP_DEV_INFO chipInfo; + /*RTMP_DEV_INFO chipInfo; */ RTMP_INF_TYPE infType; /*****************************************************************************************/ @@ -1802,42 +1802,42 @@ struct _RTMP_ADAPTER { /*****************************************************************************************/ RTMP_OS_TASK mlmeTask; #ifdef RTMP_TIMER_TASK_SUPPORT - // If you want use timer task to handle the timer related jobs, enable this. + /* If you want use timer task to handle the timer related jobs, enable this. */ RTMP_TIMER_TASK_QUEUE TimerQ; NDIS_SPIN_LOCK TimerQLock; RTMP_OS_TASK timerTask; -#endif // RTMP_TIMER_TASK_SUPPORT // +#endif /* RTMP_TIMER_TASK_SUPPORT // */ /*****************************************************************************************/ /* Tx related parameters */ /*****************************************************************************************/ - BOOLEAN DeQueueRunning[NUM_OF_TX_RING]; // for ensuring RTUSBDeQueuePacket get call once + BOOLEAN DeQueueRunning[NUM_OF_TX_RING]; /* for ensuring RTUSBDeQueuePacket get call once */ NDIS_SPIN_LOCK DeQueueLock[NUM_OF_TX_RING]; #ifdef RTMP_MAC_USB - // Data related context and AC specified, 4 AC supported - NDIS_SPIN_LOCK BulkOutLock[6]; // BulkOut spinlock for 4 ACs - NDIS_SPIN_LOCK MLMEBulkOutLock; // MLME BulkOut lock + /* Data related context and AC specified, 4 AC supported */ + NDIS_SPIN_LOCK BulkOutLock[6]; /* BulkOut spinlock for 4 ACs */ + NDIS_SPIN_LOCK MLMEBulkOutLock; /* MLME BulkOut lock */ HT_TX_CONTEXT TxContext[NUM_OF_TX_RING]; - NDIS_SPIN_LOCK TxContextQueueLock[NUM_OF_TX_RING]; // TxContextQueue spinlock + NDIS_SPIN_LOCK TxContextQueueLock[NUM_OF_TX_RING]; /* TxContextQueue spinlock */ - // 4 sets of Bulk Out index and pending flag - UCHAR NextBulkOutIndex[4]; // only used for 4 EDCA bulkout pipe + /* 4 sets of Bulk Out index and pending flag */ + UCHAR NextBulkOutIndex[4]; /* only used for 4 EDCA bulkout pipe */ - BOOLEAN BulkOutPending[6]; // used for total 6 bulkout pipe + BOOLEAN BulkOutPending[6]; /* used for total 6 bulkout pipe */ UCHAR bulkResetPipeid; BOOLEAN MgmtBulkPending; ULONG bulkResetReq[6]; -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ - // resource for software backlog queues - QUEUE_HEADER TxSwQueue[NUM_OF_TX_RING]; // 4 AC + 1 HCCA - NDIS_SPIN_LOCK TxSwQueueLock[NUM_OF_TX_RING]; // TxSwQueue spinlock + /* resource for software backlog queues */ + QUEUE_HEADER TxSwQueue[NUM_OF_TX_RING]; /* 4 AC + 1 HCCA */ + NDIS_SPIN_LOCK TxSwQueueLock[NUM_OF_TX_RING]; /* TxSwQueue spinlock */ - RTMP_DMABUF MgmtDescRing; // Shared memory for MGMT descriptors + RTMP_DMABUF MgmtDescRing; /* Shared memory for MGMT descriptors */ RTMP_MGMT_RING MgmtRing; - NDIS_SPIN_LOCK MgmtRingLock; // Prio Ring spinlock + NDIS_SPIN_LOCK MgmtRingLock; /* Prio Ring spinlock */ /*****************************************************************************************/ /* Rx related parameters */ @@ -1845,65 +1845,65 @@ struct _RTMP_ADAPTER { #ifdef RTMP_MAC_PCI RTMP_RX_RING RxRing; - NDIS_SPIN_LOCK RxRingLock; // Rx Ring spinlock + NDIS_SPIN_LOCK RxRingLock; /* Rx Ring spinlock */ #ifdef RT3090 - NDIS_SPIN_LOCK McuCmdLock; //MCU Command Queue spinlock -#endif // RT3090 // -#endif // RTMP_MAC_PCI // + NDIS_SPIN_LOCK McuCmdLock; /*MCU Command Queue spinlock */ +#endif /* RT3090 // */ +#endif /* RTMP_MAC_PCI // */ #ifdef RTMP_MAC_USB - RX_CONTEXT RxContext[RX_RING_SIZE]; // 1 for redundant multiple IRP bulk in. - NDIS_SPIN_LOCK BulkInLock; // BulkIn spinlock for 4 ACs - UCHAR PendingRx; // The Maximum pending Rx value should be RX_RING_SIZE. - UCHAR NextRxBulkInIndex; // Indicate the current RxContext Index which hold by Host controller. - UCHAR NextRxBulkInReadIndex; // Indicate the current RxContext Index which driver can read & process it. - ULONG NextRxBulkInPosition; // Want to contatenate 2 URB buffer while 1st is bulkin failed URB. This Position is 1st URB TransferLength. - ULONG TransferBufferLength; // current length of the packet buffer - ULONG ReadPosition; // current read position in a packet buffer -#endif // RTMP_MAC_USB // + RX_CONTEXT RxContext[RX_RING_SIZE]; /* 1 for redundant multiple IRP bulk in. */ + NDIS_SPIN_LOCK BulkInLock; /* BulkIn spinlock for 4 ACs */ + UCHAR PendingRx; /* The Maximum pending Rx value should be RX_RING_SIZE. */ + UCHAR NextRxBulkInIndex; /* Indicate the current RxContext Index which hold by Host controller. */ + UCHAR NextRxBulkInReadIndex; /* Indicate the current RxContext Index which driver can read & process it. */ + ULONG NextRxBulkInPosition; /* Want to contatenate 2 URB buffer while 1st is bulkin failed URB. This Position is 1st URB TransferLength. */ + ULONG TransferBufferLength; /* current length of the packet buffer */ + ULONG ReadPosition; /* current read position in a packet buffer */ +#endif /* RTMP_MAC_USB // */ /*****************************************************************************************/ /* ASIC related parameters */ /*****************************************************************************************/ - UINT32 MACVersion; // MAC version. Record rt2860C(0x28600100) or rt2860D (0x28600101).. + UINT32 MACVersion; /* MAC version. Record rt2860C(0x28600100) or rt2860D (0x28600101).. */ - // --------------------------- - // E2PROM - // --------------------------- - ULONG EepromVersion; // byte 0: version, byte 1: revision, byte 2~3: unused - ULONG FirmwareVersion; // byte 0: Minor version, byte 1: Major version, otherwise unused. + /* --------------------------- */ + /* E2PROM */ + /* --------------------------- */ + ULONG EepromVersion; /* byte 0: version, byte 1: revision, byte 2~3: unused */ + ULONG FirmwareVersion; /* byte 0: Minor version, byte 1: Major version, otherwise unused. */ USHORT EEPROMDefaultValue[NUM_EEPROM_BBP_PARMS]; - UCHAR EEPROMAddressNum; // 93c46=6 93c66=8 + UCHAR EEPROMAddressNum; /* 93c46=6 93c66=8 */ BOOLEAN EepromAccess; UCHAR EFuseTag; - // --------------------------- - // BBP Control - // --------------------------- - UCHAR BbpWriteLatch[140]; // record last BBP register value written via BBP_IO_WRITE/BBP_IO_WRITE_VY_REG_ID - CHAR BbpRssiToDbmDelta; // change from UCHAR to CHAR for high power + /* --------------------------- */ + /* BBP Control */ + /* --------------------------- */ + UCHAR BbpWriteLatch[140]; /* record last BBP register value written via BBP_IO_WRITE/BBP_IO_WRITE_VY_REG_ID */ + CHAR BbpRssiToDbmDelta; /* change from UCHAR to CHAR for high power */ BBP_R66_TUNING BbpTuning; - // ---------------------------- - // RFIC control - // ---------------------------- - UCHAR RfIcType; // RFIC_xxx - ULONG RfFreqOffset; // Frequency offset for channel switching - RTMP_RF_REGS LatchRfRegs; // latch th latest RF programming value since RF IC doesn't support READ + /* ---------------------------- */ + /* RFIC control */ + /* ---------------------------- */ + UCHAR RfIcType; /* RFIC_xxx */ + ULONG RfFreqOffset; /* Frequency offset for channel switching */ + RTMP_RF_REGS LatchRfRegs; /* latch th latest RF programming value since RF IC doesn't support READ */ - EEPROM_ANTENNA_STRUC Antenna; // Since ANtenna definition is different for a & g. We need to save it for future reference. + EEPROM_ANTENNA_STRUC Antenna; /* Since ANtenna definition is different for a & g. We need to save it for future reference. */ EEPROM_NIC_CONFIG2_STRUC NicConfig2; - // This soft Rx Antenna Diversity mechanism is used only when user set - // RX Antenna = DIVERSITY ON + /* This soft Rx Antenna Diversity mechanism is used only when user set */ + /* RX Antenna = DIVERSITY ON */ SOFT_RX_ANT_DIVERSITY RxAnt; UCHAR RFProgSeq; - CHANNEL_TX_POWER TxPower[MAX_NUM_OF_CHANNELS]; // Store Tx power value for all channels. - CHANNEL_TX_POWER ChannelList[MAX_NUM_OF_CHANNELS]; // list all supported channels for site survey - CHANNEL_11J_TX_POWER TxPower11J[MAX_NUM_OF_11JCHANNELS]; // 802.11j channel and bw - CHANNEL_11J_TX_POWER ChannelList11J[MAX_NUM_OF_11JCHANNELS]; // list all supported channels for site survey + CHANNEL_TX_POWER TxPower[MAX_NUM_OF_CHANNELS]; /* Store Tx power value for all channels. */ + CHANNEL_TX_POWER ChannelList[MAX_NUM_OF_CHANNELS]; /* list all supported channels for site survey */ + CHANNEL_11J_TX_POWER TxPower11J[MAX_NUM_OF_11JCHANNELS]; /* 802.11j channel and bw */ + CHANNEL_11J_TX_POWER ChannelList11J[MAX_NUM_OF_11JCHANNELS]; /* list all supported channels for site survey */ - UCHAR ChannelListNum; // number of channel in ChannelList[] + UCHAR ChannelListNum; /* number of channel in ChannelList[] */ UCHAR Bbp94; BOOLEAN BbpForCCK; ULONG Tx20MPwrCfgABand[5]; @@ -1911,47 +1911,47 @@ struct _RTMP_ADAPTER { ULONG Tx40MPwrCfgABand[5]; ULONG Tx40MPwrCfgGBand[5]; - BOOLEAN bAutoTxAgcA; // Enable driver auto Tx Agc control - UCHAR TssiRefA; // Store Tssi reference value as 25 temperature. - UCHAR TssiPlusBoundaryA[5]; // Tssi boundary for increase Tx power to compensate. - UCHAR TssiMinusBoundaryA[5]; // Tssi boundary for decrease Tx power to compensate. - UCHAR TxAgcStepA; // Store Tx TSSI delta increment / decrement value - CHAR TxAgcCompensateA; // Store the compensation (TxAgcStep * (idx-1)) - - BOOLEAN bAutoTxAgcG; // Enable driver auto Tx Agc control - UCHAR TssiRefG; // Store Tssi reference value as 25 temperature. - UCHAR TssiPlusBoundaryG[5]; // Tssi boundary for increase Tx power to compensate. - UCHAR TssiMinusBoundaryG[5]; // Tssi boundary for decrease Tx power to compensate. - UCHAR TxAgcStepG; // Store Tx TSSI delta increment / decrement value - CHAR TxAgcCompensateG; // Store the compensation (TxAgcStep * (idx-1)) - - CHAR BGRssiOffset0; // Store B/G RSSI#0 Offset value on EEPROM 0x46h - CHAR BGRssiOffset1; // Store B/G RSSI#1 Offset value - CHAR BGRssiOffset2; // Store B/G RSSI#2 Offset value - - CHAR ARssiOffset0; // Store A RSSI#0 Offset value on EEPROM 0x4Ah - CHAR ARssiOffset1; // Store A RSSI#1 Offset value - CHAR ARssiOffset2; // Store A RSSI#2 Offset value - - CHAR BLNAGain; // Store B/G external LNA#0 value on EEPROM 0x44h - CHAR ALNAGain0; // Store A external LNA#0 value for ch36~64 - CHAR ALNAGain1; // Store A external LNA#1 value for ch100~128 - CHAR ALNAGain2; // Store A external LNA#2 value for ch132~165 + BOOLEAN bAutoTxAgcA; /* Enable driver auto Tx Agc control */ + UCHAR TssiRefA; /* Store Tssi reference value as 25 temperature. */ + UCHAR TssiPlusBoundaryA[5]; /* Tssi boundary for increase Tx power to compensate. */ + UCHAR TssiMinusBoundaryA[5]; /* Tssi boundary for decrease Tx power to compensate. */ + UCHAR TxAgcStepA; /* Store Tx TSSI delta increment / decrement value */ + CHAR TxAgcCompensateA; /* Store the compensation (TxAgcStep * (idx-1)) */ + + BOOLEAN bAutoTxAgcG; /* Enable driver auto Tx Agc control */ + UCHAR TssiRefG; /* Store Tssi reference value as 25 temperature. */ + UCHAR TssiPlusBoundaryG[5]; /* Tssi boundary for increase Tx power to compensate. */ + UCHAR TssiMinusBoundaryG[5]; /* Tssi boundary for decrease Tx power to compensate. */ + UCHAR TxAgcStepG; /* Store Tx TSSI delta increment / decrement value */ + CHAR TxAgcCompensateG; /* Store the compensation (TxAgcStep * (idx-1)) */ + + CHAR BGRssiOffset0; /* Store B/G RSSI#0 Offset value on EEPROM 0x46h */ + CHAR BGRssiOffset1; /* Store B/G RSSI#1 Offset value */ + CHAR BGRssiOffset2; /* Store B/G RSSI#2 Offset value */ + + CHAR ARssiOffset0; /* Store A RSSI#0 Offset value on EEPROM 0x4Ah */ + CHAR ARssiOffset1; /* Store A RSSI#1 Offset value */ + CHAR ARssiOffset2; /* Store A RSSI#2 Offset value */ + + CHAR BLNAGain; /* Store B/G external LNA#0 value on EEPROM 0x44h */ + CHAR ALNAGain0; /* Store A external LNA#0 value for ch36~64 */ + CHAR ALNAGain1; /* Store A external LNA#1 value for ch100~128 */ + CHAR ALNAGain2; /* Store A external LNA#2 value for ch132~165 */ #ifdef RT30xx - // for 3572 + /* for 3572 */ UCHAR Bbp25; UCHAR Bbp26; - UCHAR TxMixerGain24G; // Tx mixer gain value from EEPROM to improve Tx EVM / Tx DAC, 2.4G + UCHAR TxMixerGain24G; /* Tx mixer gain value from EEPROM to improve Tx EVM / Tx DAC, 2.4G */ UCHAR TxMixerGain5G; -#endif // RT30xx // - // ---------------------------- - // LED control - // ---------------------------- +#endif /* RT30xx // */ + /* ---------------------------- */ + /* LED control */ + /* ---------------------------- */ MCU_LEDCS_STRUC LedCntl; - USHORT Led1; // read from EEPROM 0x3c - USHORT Led2; // EEPROM 0x3e - USHORT Led3; // EEPROM 0x40 + USHORT Led1; /* read from EEPROM 0x3c */ + USHORT Led2; /* EEPROM 0x3e */ + USHORT Led3; /* EEPROM 0x40 */ UCHAR LedIndicatorStrength; UCHAR RssiSingalstrengthOffet; BOOLEAN bLedOnScanning; @@ -1960,12 +1960,12 @@ struct _RTMP_ADAPTER { /*****************************************************************************************/ /* 802.11 related parameters */ /*****************************************************************************************/ - // outgoing BEACON frame buffer and corresponding TXD + /* outgoing BEACON frame buffer and corresponding TXD */ TXWI_STRUC BeaconTxWI; PUCHAR BeaconBuf; USHORT BeaconOffset[HW_BEACON_MAX_COUNT]; - // pre-build PS-POLL and NULL frame upon link up. for efficiency purpose. + /* pre-build PS-POLL and NULL frame upon link up. for efficiency purpose. */ PSPOLL_FRAME PsPollFrame; HEADER_802_11 NullFrame; @@ -1974,45 +1974,45 @@ struct _RTMP_ADAPTER { TX_CONTEXT NullContext; TX_CONTEXT PsPollContext; TX_CONTEXT RTSContext; -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ -//=========AP=========== +/*=========AP=========== */ -//=======STA=========== - // ----------------------------------------------- - // STA specific configuration & operation status - // used only when pAd->OpMode == OPMODE_STA - // ----------------------------------------------- - STA_ADMIN_CONFIG StaCfg; // user desired settings - STA_ACTIVE_CONFIG StaActive; // valid only when ADHOC_ON(pAd) || INFRA_ON(pAd) - CHAR nickname[IW_ESSID_MAX_SIZE + 1]; // nickname, only used in the iwconfig i/f +/*=======STA=========== */ + /* ----------------------------------------------- */ + /* STA specific configuration & operation status */ + /* used only when pAd->OpMode == OPMODE_STA */ + /* ----------------------------------------------- */ + STA_ADMIN_CONFIG StaCfg; /* user desired settings */ + STA_ACTIVE_CONFIG StaActive; /* valid only when ADHOC_ON(pAd) || INFRA_ON(pAd) */ + CHAR nickname[IW_ESSID_MAX_SIZE + 1]; /* nickname, only used in the iwconfig i/f */ NDIS_MEDIA_STATE PreMediaState; -//=======Common=========== - // OP mode: either AP or STA - UCHAR OpMode; // OPMODE_STA, OPMODE_AP +/*=======Common=========== */ + /* OP mode: either AP or STA */ + UCHAR OpMode; /* OPMODE_STA, OPMODE_AP */ - NDIS_MEDIA_STATE IndicateMediaState; // Base on Indication state, default is NdisMediaStateDisConnected + NDIS_MEDIA_STATE IndicateMediaState; /* Base on Indication state, default is NdisMediaStateDisConnected */ /* MAT related parameters */ - // configuration: read from Registry & E2PROM - BOOLEAN bLocalAdminMAC; // Use user changed MAC - UCHAR PermanentAddress[MAC_ADDR_LEN]; // Factory default MAC address - UCHAR CurrentAddress[MAC_ADDR_LEN]; // User changed MAC address - - // ------------------------------------------------------ - // common configuration to both OPMODE_STA and OPMODE_AP - // ------------------------------------------------------ + /* configuration: read from Registry & E2PROM */ + BOOLEAN bLocalAdminMAC; /* Use user changed MAC */ + UCHAR PermanentAddress[MAC_ADDR_LEN]; /* Factory default MAC address */ + UCHAR CurrentAddress[MAC_ADDR_LEN]; /* User changed MAC address */ + + /* ------------------------------------------------------ */ + /* common configuration to both OPMODE_STA and OPMODE_AP */ + /* ------------------------------------------------------ */ COMMON_CONFIG CommonCfg; MLME_STRUCT Mlme; - // AP needs those vaiables for site survey feature. - MLME_AUX MlmeAux; // temporary settings used during MLME state machine - BSS_TABLE ScanTab; // store the latest SCAN result + /* AP needs those vaiables for site survey feature. */ + MLME_AUX MlmeAux; /* temporary settings used during MLME state machine */ + BSS_TABLE ScanTab; /* store the latest SCAN result */ - //About MacTab, the sta driver will use #0 and #1 for multicast and AP. - MAC_TABLE MacTab; // ASIC on-chip WCID entry table. At TX, ASIC always use key according to this on-chip table. + /*About MacTab, the sta driver will use #0 and #1 for multicast and AP. */ + MAC_TABLE MacTab; /* ASIC on-chip WCID entry table. At TX, ASIC always use key according to this on-chip table. */ NDIS_SPIN_LOCK MacTabLock; BA_TABLE BATable; @@ -2020,46 +2020,46 @@ struct _RTMP_ADAPTER { NDIS_SPIN_LOCK BATabLock; RALINK_TIMER_STRUCT RECBATimer; - // encryption/decryption KEY tables - CIPHER_KEY SharedKey[MAX_MBSSID_NUM][4]; // STA always use SharedKey[BSS0][0..3] + /* encryption/decryption KEY tables */ + CIPHER_KEY SharedKey[MAX_MBSSID_NUM][4]; /* STA always use SharedKey[BSS0][0..3] */ - // RX re-assembly buffer for fragmentation - FRAGMENT_FRAME FragFrame; // Frame storage for fragment frame + /* RX re-assembly buffer for fragmentation */ + FRAGMENT_FRAME FragFrame; /* Frame storage for fragment frame */ - // various Counters - COUNTER_802_3 Counters8023; // 802.3 counters - COUNTER_802_11 WlanCounters; // 802.11 MIB counters - COUNTER_RALINK RalinkCounters; // Ralink propriety counters - COUNTER_DRS DrsCounters; // counters for Dynamic TX Rate Switching - PRIVATE_STRUC PrivateInfo; // Private information & counters - - // flags, see fRTMP_ADAPTER_xxx flags - ULONG Flags; // Represent current device status - ULONG PSFlags; // Power Save operation flag. + /* various Counters */ + COUNTER_802_3 Counters8023; /* 802.3 counters */ + COUNTER_802_11 WlanCounters; /* 802.11 MIB counters */ + COUNTER_RALINK RalinkCounters; /* Ralink propriety counters */ + COUNTER_DRS DrsCounters; /* counters for Dynamic TX Rate Switching */ + PRIVATE_STRUC PrivateInfo; /* Private information & counters */ + + /* flags, see fRTMP_ADAPTER_xxx flags */ + ULONG Flags; /* Represent current device status */ + ULONG PSFlags; /* Power Save operation flag. */ - // current TX sequence # + /* current TX sequence # */ USHORT Sequence; - // Control disconnect / connect event generation - //+++Didn't used anymore + /* Control disconnect / connect event generation */ + /*+++Didn't used anymore */ ULONG LinkDownTime; - //--- + /*--- */ ULONG LastRxRate; ULONG LastTxRate; - //+++Used only for Station - BOOLEAN bConfigChanged; // Config Change flag for the same SSID setting - //--- - - ULONG ExtraInfo; // Extra information for displaying status - ULONG SystemErrorBitmap; // b0: E2PROM version error - - //+++Didn't used anymore - ULONG MacIcVersion; // MAC/BBP serial interface issue solved after ver.D - //--- - - // --------------------------- - // System event log - // --------------------------- + /*+++Used only for Station */ + BOOLEAN bConfigChanged; /* Config Change flag for the same SSID setting */ + /*--- */ + + ULONG ExtraInfo; /* Extra information for displaying status */ + ULONG SystemErrorBitmap; /* b0: E2PROM version error */ + + /*+++Didn't used anymore */ + ULONG MacIcVersion; /* MAC/BBP serial interface issue solved after ver.D */ + /*--- */ + + /* --------------------------- */ + /* System event log */ + /* --------------------------- */ RT_802_11_EVENT_TABLE EventTab; BOOLEAN HTCEnable; @@ -2070,64 +2070,64 @@ struct _RTMP_ADAPTER { #ifdef RTMP_MAC_USB ULONG BulkOutDataOneSecCount; ULONG BulkInDataOneSecCount; - ULONG BulkLastOneSecCount; // BulkOutDataOneSecCount + BulkInDataOneSecCount + ULONG BulkLastOneSecCount; /* BulkOutDataOneSecCount + BulkInDataOneSecCount */ ULONG watchDogRxCnt; ULONG watchDogRxOverFlowCnt; ULONG watchDogTxPendingCnt[NUM_OF_TX_RING]; INT TransferedLength[NUM_OF_TX_RING]; -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ BOOLEAN bUpdateBcnCntDone; - ULONG watchDogMacDeadlock; // prevent MAC/BBP into deadlock condition - // ---------------------------- - // DEBUG paramerts - // ---------------------------- - //ULONG DebugSetting[4]; + ULONG watchDogMacDeadlock; /* prevent MAC/BBP into deadlock condition */ + /* ---------------------------- */ + /* DEBUG paramerts */ + /* ---------------------------- */ + /*ULONG DebugSetting[4]; */ BOOLEAN bBanAllBaSetup; BOOLEAN bPromiscuous; - // ---------------------------- - // rt2860c emulation-use Parameters - // ---------------------------- - //ULONG rtsaccu[30]; - //ULONG ctsaccu[30]; - //ULONG cfendaccu[30]; - //ULONG bacontent[16]; - //ULONG rxint[RX_RING_SIZE+1]; - //UCHAR rcvba[60]; + /* ---------------------------- */ + /* rt2860c emulation-use Parameters */ + /* ---------------------------- */ + /*ULONG rtsaccu[30]; */ + /*ULONG ctsaccu[30]; */ + /*ULONG cfendaccu[30]; */ + /*ULONG bacontent[16]; */ + /*ULONG rxint[RX_RING_SIZE+1]; */ + /*UCHAR rcvba[60]; */ BOOLEAN bLinkAdapt; BOOLEAN bForcePrintTX; BOOLEAN bForcePrintRX; - //BOOLEAN bDisablescanning; //defined in RT2870 USB + /*BOOLEAN bDisablescanning; //defined in RT2870 USB */ BOOLEAN bStaFifoTest; BOOLEAN bProtectionTest; BOOLEAN bBroadComHT; - //+++Following add from RT2870 USB. + /*+++Following add from RT2870 USB. */ ULONG BulkOutReq; ULONG BulkOutComplete; ULONG BulkOutCompleteOther; - ULONG BulkOutCompleteCancel; // seems not use now? + ULONG BulkOutCompleteCancel; /* seems not use now? */ ULONG BulkInReq; ULONG BulkInComplete; ULONG BulkInCompleteFail; - //--- + /*--- */ struct wificonf WIFItestbed; struct reordering_mpdu_pool mpdu_blk_pool; - ULONG OneSecondnonBEpackets; // record non BE packets per second + ULONG OneSecondnonBEpackets; /* record non BE packets per second */ #ifdef LINUX struct iw_statistics iw_stats; struct net_device_stats stats; -#endif // LINUX // +#endif /* LINUX // */ ULONG TbttTickCount; #ifdef PCI_MSI_SUPPORT BOOLEAN HaveMsi; -#endif // PCI_MSI_SUPPORT // +#endif /* PCI_MSI_SUPPORT // */ UCHAR is_on; @@ -2143,30 +2143,30 @@ struct _RTMP_ADAPTER { #ifdef RTMP_EFUSE_SUPPORT BOOLEAN bUseEfuse; UCHAR EEPROMImage[1024]; -#endif // RTMP_EFUSE_SUPPORT // -#endif // RT30xx // +#endif /* RTMP_EFUSE_SUPPORT // */ +#endif /* RT30xx // */ }; #define DELAYINTMASK 0x0003fffb #define INTMASK 0x0003fffb #define IndMask 0x0003fffc -#define RxINT 0x00000005 // Delayed Rx or indivi rx -#define TxDataInt 0x000000fa // Delayed Tx or indivi tx -#define TxMgmtInt 0x00000102 // Delayed Tx or indivi tx -#define TxCoherent 0x00020000 // tx coherent -#define RxCoherent 0x00010000 // rx coherent -#define McuCommand 0x00000200 // mcu -#define PreTBTTInt 0x00001000 // Pre-TBTT interrupt -#define TBTTInt 0x00000800 // TBTT interrupt -#define GPTimeOutInt 0x00008000 // GPtimeout interrupt -#define AutoWakeupInt 0x00004000 // AutoWakeupInt interrupt -#define FifoStaFullInt 0x00002000 // fifo statistics full interrupt +#define RxINT 0x00000005 /* Delayed Rx or indivi rx */ +#define TxDataInt 0x000000fa /* Delayed Tx or indivi tx */ +#define TxMgmtInt 0x00000102 /* Delayed Tx or indivi tx */ +#define TxCoherent 0x00020000 /* tx coherent */ +#define RxCoherent 0x00010000 /* rx coherent */ +#define McuCommand 0x00000200 /* mcu */ +#define PreTBTTInt 0x00001000 /* Pre-TBTT interrupt */ +#define TBTTInt 0x00000800 /* TBTT interrupt */ +#define GPTimeOutInt 0x00008000 /* GPtimeout interrupt */ +#define AutoWakeupInt 0x00004000 /* AutoWakeupInt interrupt */ +#define FifoStaFullInt 0x00002000 /* fifo statistics full interrupt */ /*************************************************************************** * Rx Path software control block related data structures **************************************************************************/ typedef struct _RX_BLK_ { -// RXD_STRUC RxD; // sample +/* RXD_STRUC RxD; // sample */ RT28XX_RXD_STRUC RxD; PRXWI_STRUC pRxWI; PHEADER_802_11 pHeader; @@ -2174,7 +2174,7 @@ typedef struct _RX_BLK_ { UCHAR *pData; USHORT DataSize; USHORT Flags; - UCHAR UserPriority; // for calculate TKIP MIC using + UCHAR UserPriority; /* for calculate TKIP MIC using */ } RX_BLK; #define RX_BLK_SET_FLAG(_pRxBlk, _flag) (_pRxBlk->Flags |= _flag) @@ -2210,53 +2210,53 @@ typedef struct _RX_BLK_ { #define TX_RALINK_FRAME 0x10 #define TX_FRAG_FRAME 0x20 -// Currently the sizeof(TX_BLK) is 148 bytes. +/* Currently the sizeof(TX_BLK) is 148 bytes. */ typedef struct _TX_BLK_ { UCHAR QueIdx; - UCHAR TxFrameType; // Indicate the Transmission type of the all frames in one batch - UCHAR TotalFrameNum; // Total frame number want to send-out in one batch - USHORT TotalFragNum; // Total frame fragments required in one batch - USHORT TotalFrameLen; // Total length of all frames want to send-out in one batch + UCHAR TxFrameType; /* Indicate the Transmission type of the all frames in one batch */ + UCHAR TotalFrameNum; /* Total frame number want to send-out in one batch */ + USHORT TotalFragNum; /* Total frame fragments required in one batch */ + USHORT TotalFrameLen; /* Total length of all frames want to send-out in one batch */ QUEUE_HEADER TxPacketList; - MAC_TABLE_ENTRY *pMacEntry; // NULL: packet with 802.11 RA field is multicast/broadcast address + MAC_TABLE_ENTRY *pMacEntry; /* NULL: packet with 802.11 RA field is multicast/broadcast address */ HTTRANSMIT_SETTING *pTransmit; - // Following structure used for the characteristics of a specific packet. + /* Following structure used for the characteristics of a specific packet. */ PNDIS_PACKET pPacket; - PUCHAR pSrcBufHeader; // Reference to the head of sk_buff->data - PUCHAR pSrcBufData; // Reference to the sk_buff->data, will changed depends on hanlding progresss - UINT SrcBufLen; // Length of packet payload which not including Layer 2 header - PUCHAR pExtraLlcSnapEncap; // NULL means no extra LLC/SNAP is required - UCHAR HeaderBuf[128]; // TempBuffer for TX_INFO + TX_WI + 802.11 Header + padding + AMSDU SubHeader + LLC/SNAP - //RT2870 2.1.0.0 uses only 80 bytes - //RT3070 2.1.1.0 uses only 96 bytes - //RT3090 2.1.0.0 uses only 96 bytes - UCHAR MpduHeaderLen; // 802.11 header length NOT including the padding - UCHAR HdrPadLen; // recording Header Padding Length; - UCHAR apidx; // The interface associated to this packet - UCHAR Wcid; // The MAC entry associated to this packet - UCHAR UserPriority; // priority class of packet - UCHAR FrameGap; // what kind of IFS this packet use - UCHAR MpduReqNum; // number of fragments of this frame - UCHAR TxRate; // TODO: Obsoleted? Should change to MCS? - UCHAR CipherAlg; // cipher alogrithm + PUCHAR pSrcBufHeader; /* Reference to the head of sk_buff->data */ + PUCHAR pSrcBufData; /* Reference to the sk_buff->data, will changed depends on hanlding progresss */ + UINT SrcBufLen; /* Length of packet payload which not including Layer 2 header */ + PUCHAR pExtraLlcSnapEncap; /* NULL means no extra LLC/SNAP is required */ + UCHAR HeaderBuf[128]; /* TempBuffer for TX_INFO + TX_WI + 802.11 Header + padding + AMSDU SubHeader + LLC/SNAP */ + /*RT2870 2.1.0.0 uses only 80 bytes */ + /*RT3070 2.1.1.0 uses only 96 bytes */ + /*RT3090 2.1.0.0 uses only 96 bytes */ + UCHAR MpduHeaderLen; /* 802.11 header length NOT including the padding */ + UCHAR HdrPadLen; /* recording Header Padding Length; */ + UCHAR apidx; /* The interface associated to this packet */ + UCHAR Wcid; /* The MAC entry associated to this packet */ + UCHAR UserPriority; /* priority class of packet */ + UCHAR FrameGap; /* what kind of IFS this packet use */ + UCHAR MpduReqNum; /* number of fragments of this frame */ + UCHAR TxRate; /* TODO: Obsoleted? Should change to MCS? */ + UCHAR CipherAlg; /* cipher alogrithm */ PCIPHER_KEY pKey; - USHORT Flags; //See following definitions for detail. + USHORT Flags; /*See following definitions for detail. */ - //YOU SHOULD NOT TOUCH IT! Following parameters are used for hardware-depended layer. - ULONG Priv; // Hardware specific value saved in here. + /*YOU SHOULD NOT TOUCH IT! Following parameters are used for hardware-depended layer. */ + ULONG Priv; /* Hardware specific value saved in here. */ } TX_BLK, *PTX_BLK; -#define fTX_bRtsRequired 0x0001 // Indicate if need send RTS frame for protection. Not used in RT2860/RT2870. -#define fTX_bAckRequired 0x0002 // the packet need ack response -#define fTX_bPiggyBack 0x0004 // Legacy device use Piggback or not -#define fTX_bHTRate 0x0008 // allow to use HT rate -#define fTX_bForceNonQoS 0x0010 // force to transmit frame without WMM-QoS in HT mode -#define fTX_bAllowFrag 0x0020 // allow to fragment the packet, A-MPDU, A-MSDU, A-Ralink is not allowed to fragment -#define fTX_bMoreData 0x0040 // there are more data packets in PowerSave Queue -#define fTX_bWMM 0x0080 // QOS Data +#define fTX_bRtsRequired 0x0001 /* Indicate if need send RTS frame for protection. Not used in RT2860/RT2870. */ +#define fTX_bAckRequired 0x0002 /* the packet need ack response */ +#define fTX_bPiggyBack 0x0004 /* Legacy device use Piggback or not */ +#define fTX_bHTRate 0x0008 /* allow to use HT rate */ +#define fTX_bForceNonQoS 0x0010 /* force to transmit frame without WMM-QoS in HT mode */ +#define fTX_bAllowFrag 0x0020 /* allow to fragment the packet, A-MPDU, A-MSDU, A-Ralink is not allowed to fragment */ +#define fTX_bMoreData 0x0040 /* there are more data packets in PowerSave Queue */ +#define fTX_bWMM 0x0080 /* QOS Data */ #define fTX_bClearEAPFrame 0x0100 #define TX_BLK_SET_FLAG(_pTxBlk, _flag) (_pTxBlk->Flags |= _flag) @@ -2278,7 +2278,7 @@ static inline VOID ConvertMulticastIP2MA switch (ProtoType) { case ETH_P_IPV6: -// memset(*ppMacAddr, 0, ETH_LENGTH_OF_ADDRESS); +/* memset(*ppMacAddr, 0, ETH_LENGTH_OF_ADDRESS); */ *(*ppMacAddr) = 0x33; *(*ppMacAddr + 1) = 0x33; *(*ppMacAddr + 2) = pIpAddr[12]; @@ -2289,7 +2289,7 @@ static inline VOID ConvertMulticastIP2MA case ETH_P_IP: default: -// memset(*ppMacAddr, 0, ETH_LENGTH_OF_ADDRESS); +/* memset(*ppMacAddr, 0, ETH_LENGTH_OF_ADDRESS); */ *(*ppMacAddr) = 0x01; *(*ppMacAddr + 1) = 0x00; *(*ppMacAddr + 2) = 0x5e; @@ -2305,9 +2305,9 @@ static inline VOID ConvertMulticastIP2MA char *GetPhyMode(int Mode); char *GetBW(int BW); -// -// Private routines in rtmp_init.c -// +/* */ +/* Private routines in rtmp_init.c */ +/* */ NDIS_STATUS RTMPAllocAdapterBlock(IN PVOID handle, OUT PRTMP_ADAPTER * ppAdapter); @@ -2328,7 +2328,7 @@ NDIS_STATUS RT30xxWriteRFRegister(IN PRT NDIS_STATUS RT30xxReadRFRegister(IN PRTMP_ADAPTER pAd, IN UCHAR regID, IN PUCHAR pValue); -#endif // RTMP_RF_RW_SUPPORT // +#endif /* RTMP_RF_RW_SUPPORT // */ VOID NICReadEEPROMParameters(IN PRTMP_ADAPTER pAd, IN PUCHAR mac_addr); @@ -2386,9 +2386,9 @@ VOID RTMPSetSignalLED(IN PRTMP_ADAPTER p VOID RTMPEnableRxTx(IN PRTMP_ADAPTER pAd); -// -// prototype in action.c -// +/* */ +/* prototype in action.c */ +/* */ VOID ActionStateMachineInit(IN PRTMP_ADAPTER pAd, IN STATE_MACHINE * S, OUT STATE_MACHINE_FUNC Trans[]); @@ -2444,9 +2444,9 @@ BOOLEAN CntlEnqueueForRecv(IN PRTMP_ADAP IN ULONG Wcid, IN ULONG MsgLen, IN PFRAME_BA_REQ pMsg); -// -// Private routines in rtmp_data.c -// +/* */ +/* Private routines in rtmp_data.c */ +/* */ BOOLEAN RTMPHandleRxDoneInterrupt(IN PRTMP_ADAPTER pAd); BOOLEAN RTMPHandleTxRingDmaDoneInterrupt(IN PRTMP_ADAPTER pAd, @@ -2511,11 +2511,11 @@ NDIS_STATUS MlmeDataHardTransmit(IN PRTM VOID RTMPWriteTxDescriptor(IN PRTMP_ADAPTER pAd, IN PTXD_STRUC pTxD, IN BOOLEAN bWIV, IN UCHAR QSEL); -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ USHORT RTMPCalcDuration(IN PRTMP_ADAPTER pAd, IN UCHAR Rate, IN ULONG Size); -VOID RTMPWriteTxWI(IN PRTMP_ADAPTER pAd, IN PTXWI_STRUC pTxWI, IN BOOLEAN FRAG, IN BOOLEAN CFACK, IN BOOLEAN InsTimestamp, IN BOOLEAN AMPDU, IN BOOLEAN Ack, IN BOOLEAN NSeq, // HW new a sequence. +VOID RTMPWriteTxWI(IN PRTMP_ADAPTER pAd, IN PTXWI_STRUC pTxWI, IN BOOLEAN FRAG, IN BOOLEAN CFACK, IN BOOLEAN InsTimestamp, IN BOOLEAN AMPDU, IN BOOLEAN Ack, IN BOOLEAN NSeq, /* HW new a sequence. */ IN UCHAR BASize, IN UCHAR WCID, IN ULONG Length, @@ -2538,8 +2538,8 @@ VOID RTMPResumeMsduTransmission(IN PRTMP NDIS_STATUS MiniportMMRequest(IN PRTMP_ADAPTER pAd, IN UCHAR QueIdx, IN PUCHAR pData, IN UINT Length); -//+++mark by shiang, now this function merge to MiniportMMRequest() -//---mark by shiang, now this function merge to MiniportMMRequest() +/*+++mark by shiang, now this function merge to MiniportMMRequest() */ +/*---mark by shiang, now this function merge to MiniportMMRequest() */ VOID RTMPSendNullFrame(IN PRTMP_ADAPTER pAd, IN UCHAR TxRate, IN BOOLEAN bQosNull); @@ -2588,9 +2588,9 @@ BOOLEAN RTMPCheckDHCPFrame(IN PRTMP_ADAP BOOLEAN RTMPCheckEtherType(IN PRTMP_ADAPTER pAd, IN PNDIS_PACKET pPacket); -// -// Private routines in rtmp_wep.c -// +/* */ +/* Private routines in rtmp_wep.c */ +/* */ VOID RTMPInitWepEngine(IN PRTMP_ADAPTER pAd, IN PUCHAR pKey, IN UCHAR KeyId, IN UCHAR KeyLen, IN PUCHAR pDest); @@ -2619,11 +2619,11 @@ VOID WPAARCFOUR_ENCRYPT(IN PARCFOURCONTE UINT RTMP_CALC_FCS32(IN UINT Fcs, IN PUCHAR Cp, IN INT Len); -// -// MLME routines -// +/* */ +/* MLME routines */ +/* */ -// Asic/RF/BBP related functions +/* Asic/RF/BBP related functions */ VOID AsicAdjustTxPower(IN PRTMP_ADAPTER pAd); @@ -2711,7 +2711,7 @@ BOOLEAN AsicSendCommandToMcu(IN PRTMP_AD #ifdef RTMP_MAC_PCI BOOLEAN AsicCheckCommanOk(IN PRTMP_ADAPTER pAd, IN UCHAR Command); -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ VOID MacAddrRandomBssid(IN PRTMP_ADAPTER pAd, OUT PUCHAR pAddr); @@ -2748,7 +2748,7 @@ VOID BssTableDeleteEntry(IN OUT PBSS_TAB VOID BATableDeleteORIEntry(IN OUT PRTMP_ADAPTER pAd, IN BA_ORI_ENTRY * pBAORIEntry); -VOID BssEntrySet(IN PRTMP_ADAPTER pAd, OUT PBSS_ENTRY pBss, IN PUCHAR pBssid, IN CHAR Ssid[], IN UCHAR SsidLen, IN UCHAR BssType, IN USHORT BeaconPeriod, IN PCF_PARM CfParm, IN USHORT AtimWin, IN USHORT CapabilityInfo, IN UCHAR SupRate[], IN UCHAR SupRateLen, IN UCHAR ExtRate[], IN UCHAR ExtRateLen, IN HT_CAPABILITY_IE * pHtCapability, IN ADD_HT_INFO_IE * pAddHtInfo, // AP might use this additional ht info IE +VOID BssEntrySet(IN PRTMP_ADAPTER pAd, OUT PBSS_ENTRY pBss, IN PUCHAR pBssid, IN CHAR Ssid[], IN UCHAR SsidLen, IN UCHAR BssType, IN USHORT BeaconPeriod, IN PCF_PARM CfParm, IN USHORT AtimWin, IN USHORT CapabilityInfo, IN UCHAR SupRate[], IN UCHAR SupRateLen, IN UCHAR ExtRate[], IN UCHAR ExtRateLen, IN HT_CAPABILITY_IE * pHtCapability, IN ADD_HT_INFO_IE * pAddHtInfo, /* AP might use this additional ht info IE */ IN UCHAR HtCapabilityLen, IN UCHAR AddHtInfoLen, IN UCHAR NewExtChanOffset, @@ -2761,7 +2761,7 @@ VOID BssEntrySet(IN PRTMP_ADAPTER pAd, O IN PQBSS_LOAD_PARM pQbssLoad, IN USHORT LengthVIE, IN PNDIS_802_11_VARIABLE_IEs pVIE); -ULONG BssTableSetEntry(IN PRTMP_ADAPTER pAd, OUT PBSS_TABLE pTab, IN PUCHAR pBssid, IN CHAR Ssid[], IN UCHAR SsidLen, IN UCHAR BssType, IN USHORT BeaconPeriod, IN CF_PARM * CfParm, IN USHORT AtimWin, IN USHORT CapabilityInfo, IN UCHAR SupRate[], IN UCHAR SupRateLen, IN UCHAR ExtRate[], IN UCHAR ExtRateLen, IN HT_CAPABILITY_IE * pHtCapability, IN ADD_HT_INFO_IE * pAddHtInfo, // AP might use this additional ht info IE +ULONG BssTableSetEntry(IN PRTMP_ADAPTER pAd, OUT PBSS_TABLE pTab, IN PUCHAR pBssid, IN CHAR Ssid[], IN UCHAR SsidLen, IN UCHAR BssType, IN USHORT BeaconPeriod, IN CF_PARM * CfParm, IN USHORT AtimWin, IN USHORT CapabilityInfo, IN UCHAR SupRate[], IN UCHAR SupRateLen, IN UCHAR ExtRate[], IN UCHAR ExtRateLen, IN HT_CAPABILITY_IE * pHtCapability, IN ADD_HT_INFO_IE * pAddHtInfo, /* AP might use this additional ht info IE */ IN UCHAR HtCapabilityLen, IN UCHAR AddHtInfoLen, IN UCHAR NewExtChanOffset, @@ -2849,7 +2849,7 @@ VOID DisassocTimeout(IN PVOID SystemSpec IN PVOID FunctionContext, IN PVOID SystemSpecific2, IN PVOID SystemSpecific3); -//---------------------------------------------- +/*---------------------------------------------- */ VOID MlmeAssocReqAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem); VOID MlmeReassocReqAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem); @@ -2879,7 +2879,7 @@ VOID InvalidStateWhenDisassociate(IN PRT #ifdef RTMP_MAC_USB VOID MlmeCntlConfirm(IN PRTMP_ADAPTER pAd, IN ULONG MsgType, IN USHORT Msg); -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ VOID ComposePsPoll(IN PRTMP_ADAPTER pAd); @@ -2918,7 +2918,7 @@ VOID MlmeDeauthReqAction(IN PRTMP_ADAPTE VOID InvalidStateWhenAuth(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem); -//============================================= +/*============================================= */ VOID AuthRspStateMachineInit(IN PRTMP_ADAPTER pAd, IN PSTATE_MACHINE Sm, @@ -2932,11 +2932,11 @@ VOID PeerAuthSimpleRspGenAndSend(IN PRTM IN USHORT Seq, IN USHORT Reason, IN USHORT Status); -// -// Private routines in dls.c -// +/* */ +/* Private routines in dls.c */ +/* */ -//======================================== +/*======================================== */ VOID SyncStateMachineInit(IN PRTMP_ADAPTER pAd, IN STATE_MACHINE * Sm, @@ -2959,7 +2959,7 @@ VOID InvalidStateWhenStart(IN PRTMP_ADAP VOID EnqueueProbeRequest(IN PRTMP_ADAPTER pAd); BOOLEAN ScanRunning(IN PRTMP_ADAPTER pAd); -//========================================= +/*========================================= */ VOID MlmeCntlInit(IN PRTMP_ADAPTER pAd, IN STATE_MACHINE * S, OUT STATE_MACHINE_FUNC Trans[]); @@ -3135,7 +3135,7 @@ BOOLEAN PeerAuthSanity(IN PRTMP_ADAPTER OUT USHORT * Seq, OUT USHORT * Status, OUT CHAR ChlgText[]); -BOOLEAN PeerAssocRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * pMsg, IN ULONG MsgLen, OUT PUCHAR pAddr2, OUT USHORT * pCapabilityInfo, OUT USHORT * pStatus, OUT USHORT * pAid, OUT UCHAR SupRate[], OUT UCHAR * pSupRateLen, OUT UCHAR ExtRate[], OUT UCHAR * pExtRateLen, OUT HT_CAPABILITY_IE * pHtCapability, OUT ADD_HT_INFO_IE * pAddHtInfo, // AP might use this additional ht info IE +BOOLEAN PeerAssocRspSanity(IN PRTMP_ADAPTER pAd, IN VOID * pMsg, IN ULONG MsgLen, OUT PUCHAR pAddr2, OUT USHORT * pCapabilityInfo, OUT USHORT * pStatus, OUT USHORT * pAid, OUT UCHAR SupRate[], OUT UCHAR * pSupRateLen, OUT UCHAR ExtRate[], OUT UCHAR * pExtRateLen, OUT HT_CAPABILITY_IE * pHtCapability, OUT ADD_HT_INFO_IE * pAddHtInfo, /* AP might use this additional ht info IE */ OUT UCHAR * pHtCapabilityLen, OUT UCHAR * pAddHtInfoLen, OUT UCHAR * pNewExtChannelOffset, @@ -3260,7 +3260,7 @@ VOID AsicSetRxAnt(IN PRTMP_ADAPTER pAd, VOID RTMPFilterCalibration(IN PRTMP_ADAPTER pAd); #ifdef RTMP_EFUSE_SUPPORT -//2008/09/11:KH add to support efuse<-- +/*2008/09/11:KH add to support efuse<-- */ INT set_eFuseGetFreeBlockCount_Proc(IN PRTMP_ADAPTER pAd, IN PSTRING arg); INT set_eFusedump_Proc(IN PRTMP_ADAPTER pAd, IN PSTRING arg); @@ -3274,28 +3274,28 @@ int RtmpEfuseSupportCheck(IN RTMP_ADAPTE VOID eFuseGetFreeBlockCount(IN PRTMP_ADAPTER pAd, PUINT EfuseFreeBlock); INT eFuse_init(IN PRTMP_ADAPTER pAd); -//2008/09/11:KH add to support efuse--> -#endif // RTMP_EFUSE_SUPPORT // +/*2008/09/11:KH add to support efuse--> */ +#endif /* RTMP_EFUSE_SUPPORT // */ -// add by johnli, RF power sequence setup +/* add by johnli, RF power sequence setup */ VOID RT30xxLoadRFNormalModeSetup(IN PRTMP_ADAPTER pAd); VOID RT30xxLoadRFSleepModeSetup(IN PRTMP_ADAPTER pAd); VOID RT30xxReverseRFSleepModeSetup(IN PRTMP_ADAPTER pAd); -// end johnli +/* end johnli */ #ifdef RT3070 VOID NICInitRT3070RFRegisters(IN RTMP_ADAPTER * pAd); -#endif // RT3070 // +#endif /* RT3070 // */ #ifdef RT3090 VOID NICInitRT3090RFRegisters(IN RTMP_ADAPTER * pAd); -#endif // RT3090 // +#endif /* RT3090 // */ VOID RT30xxHaltAction(IN PRTMP_ADAPTER pAd); VOID RT30xxSetRxAnt(IN PRTMP_ADAPTER pAd, IN UCHAR Ant); -#endif // RT30xx // +#endif /* RT30xx // */ VOID AsicEvaluateRxAnt(IN PRTMP_ADAPTER pAd); @@ -3333,9 +3333,9 @@ UCHAR NextChannel(IN PRTMP_ADAPTER pAd, VOID ChangeToCellPowerLimit(IN PRTMP_ADAPTER pAd, IN UCHAR AironetCellPowerLimit); -// -// Prototypes of function definition in rtmp_tkip.c -// +/* */ +/* Prototypes of function definition in rtmp_tkip.c */ +/* */ VOID RTMPInitTkipEngine(IN PRTMP_ADAPTER pAd, IN PUCHAR pTKey, IN UCHAR KeyId, @@ -3375,9 +3375,9 @@ BOOLEAN RTMPSoftDecryptAES(IN PRTMP_ADAP IN PUCHAR pData, IN ULONG DataByteCnt, IN PCIPHER_KEY pWpaKey); -// -// Prototypes of function definition in cmm_info.c -// +/* */ +/* Prototypes of function definition in cmm_info.c */ +/* */ INT RT_CfgSetCountryRegion(IN PRTMP_ADAPTER pAd, IN PSTRING arg, IN INT band); INT RT_CfgSetWirelessMode(IN PRTMP_ADAPTER pAd, IN PSTRING arg); @@ -3393,9 +3393,9 @@ INT RT_CfgSetWPAPSKKey(IN RTMP_ADAPTER * IN UCHAR * pHashStr, IN INT hashStrLen, OUT PUCHAR pPMKBuf); -// -// Prototypes of function definition in cmm_info.c -// +/* */ +/* Prototypes of function definition in cmm_info.c */ +/* */ VOID RTMPWPARemoveAllKeys(IN PRTMP_ADAPTER pAd); VOID RTMPSetPhyMode(IN PRTMP_ADAPTER pAd, IN ULONG phymode); @@ -3478,9 +3478,9 @@ NDIS_STATUS RTMPSoftDecryptBroadCastData VOID RTMPMakeRSNIE(IN PRTMP_ADAPTER pAd, IN UINT AuthMode, IN UINT WepStatus, IN UCHAR apidx); -// -// function prototype in ap_wpa.c -// +/* */ +/* function prototype in ap_wpa.c */ +/* */ VOID RTMPGetTxTscFromAsic(IN PRTMP_ADAPTER pAd, IN UCHAR apidx, OUT PUCHAR pTxTsc); @@ -3524,7 +3524,7 @@ VOID AES_GTK_KEY_WRAP(IN UCHAR * key, IN UCHAR * plaintext, IN UINT32 p_len, OUT UCHAR * ciphertext); -//typedef void (*TIMER_FUNCTION)(unsigned long); +/*typedef void (*TIMER_FUNCTION)(unsigned long); */ /* timeout -- ms */ VOID RTMP_SetPeriodicTimer(IN NDIS_MINIPORT_TIMER * pTimer, @@ -3675,7 +3675,7 @@ void ba_reordering_resource_release(PRTM PSTRING rstrtok(IN PSTRING s, IN const PSTRING ct); -////////// common ioctl functions ////////// +/*//////// common ioctl functions ////////// */ INT SetCommonHT(IN PRTMP_ADAPTER pAd); INT WpaCheckEapCode(IN PRTMP_ADAPTER pAd, @@ -3688,15 +3688,15 @@ int wext_notify_event_assoc(IN RTMP_ADAP BOOLEAN STARxDoneInterruptHandle(IN PRTMP_ADAPTER pAd, IN BOOLEAN argc); -// AMPDU packet indication +/* AMPDU packet indication */ VOID Indicate_AMPDU_Packet(IN PRTMP_ADAPTER pAd, IN RX_BLK * pRxBlk, IN UCHAR FromWhichBSSID); -// AMSDU packet indication +/* AMSDU packet indication */ VOID Indicate_AMSDU_Packet(IN PRTMP_ADAPTER pAd, IN RX_BLK * pRxBlk, IN UCHAR FromWhichBSSID); -// Normal legacy Rx packet indication +/* Normal legacy Rx packet indication */ VOID Indicate_Legacy_Packet(IN PRTMP_ADAPTER pAd, IN RX_BLK * pRxBlk, IN UCHAR FromWhichBSSID); @@ -3711,7 +3711,7 @@ void wlan_802_11_to_802_3_packet(IN PRTM IN PUCHAR pHeader802_3, IN UCHAR FromWhichBSSID); -// remove LLC and get 802_3 Header +/* remove LLC and get 802_3 Header */ #define RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(_pRxBlk, _pHeader802_3) \ { \ PUCHAR _pRemovedLLCSNAP = NULL, _pDA, _pSA; \ @@ -3748,7 +3748,7 @@ VOID Sta_Announce_or_Forward_802_3_Packe #define ANNOUNCE_OR_FORWARD_802_3_PACKET(_pAd, _pPacket, _FromWhichBSS)\ Sta_Announce_or_Forward_802_3_Packet(_pAd, _pPacket, _FromWhichBSS); - //announce_802_3_packet(_pAd, _pPacket); + /*announce_802_3_packet(_pAd, _pPacket); */ PNDIS_PACKET DuplicatePacket(IN PRTMP_ADAPTER pAd, IN PNDIS_PACKET pPacket, IN UCHAR FromWhichBSSID); @@ -3757,7 +3757,7 @@ PNDIS_PACKET ClonePacket(IN PRTMP_ADAPTE IN PNDIS_PACKET pPacket, IN PUCHAR pData, IN ULONG DataSize); -// Normal, AMPDU or AMSDU +/* Normal, AMPDU or AMSDU */ VOID CmmRxnonRalinkFrameIndicate(IN PRTMP_ADAPTER pAd, IN RX_BLK * pRxBlk, IN UCHAR FromWhichBSSID); @@ -3913,9 +3913,9 @@ INT RtmpRaDevCtrlInit(IN RTMP_ADAPTER * BOOLEAN RtmpRaDevCtrlExit(IN RTMP_ADAPTER * pAd); #ifdef RTMP_MAC_PCI -// -// Function Prototype in cmm_data_pci.c -// +/* */ +/* Function Prototype in cmm_data_pci.c */ +/* */ USHORT RtmpPCI_WriteTxResource(IN PRTMP_ADAPTER pAd, IN TX_BLK * pTxBlk, IN BOOLEAN bIsLast, OUT USHORT * FreeNumber); @@ -3988,12 +3988,12 @@ VOID RT28xxPciStaAsicSleepThenAutoWakeup VOID RT28xxPciMlmeRadioOn(IN PRTMP_ADAPTER pAd); VOID RT28xxPciMlmeRadioOFF(IN PRTMP_ADAPTER pAd); -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ #ifdef RTMP_MAC_USB -// -// Function Prototype in rtusb_bulk.c -// +/* */ +/* Function Prototype in rtusb_bulk.c */ +/* */ VOID RTUSBInitTxDesc(IN PRTMP_ADAPTER pAd, IN PTX_CONTEXT pTxContext, IN UCHAR BulkOutPipeId, IN usb_complete_t Func); @@ -4036,9 +4036,9 @@ VOID RTUSBInitRxDesc(IN PRTMP_ADAPTER pA VOID RTUSBBulkRxHandle(IN unsigned long data); -// -// Function Prototype in rtusb_io.c -// +/* */ +/* Function Prototype in rtusb_io.c */ +/* */ NTSTATUS RTUSBMultiRead(IN PRTMP_ADAPTER pAd, IN USHORT Offset, OUT PUCHAR pData, IN USHORT length); @@ -4152,9 +4152,9 @@ VOID RTUSBMlmeHardTransmit(IN PRTMP_ADAP INT MlmeThread(IN PVOID Context); -// -// Function Prototype in rtusb_data.c -// +/* */ +/* Function Prototype in rtusb_data.c */ +/* */ NDIS_STATUS RTUSBFreeDescriptorRequest(IN PRTMP_ADAPTER pAd, IN UCHAR BulkOutPipeId, IN UINT32 NumberRequired); @@ -4167,9 +4167,9 @@ VOID RTMPWriteTxInfo(IN PRTMP_ADAPTER pA IN BOOLEAN bWiv, IN UCHAR QueueSel, IN UCHAR NextValid, IN UCHAR TxBurst); -// -// Function Prototype in cmm_data_usb.c -// +/* */ +/* Function Prototype in cmm_data_usb.c */ +/* */ USHORT RtmpUSB_WriteSubTxResource(IN PRTMP_ADAPTER pAd, IN TX_BLK * pTxBlk, IN BOOLEAN bIsLast, OUT USHORT * FreeNumber); @@ -4219,7 +4219,7 @@ VOID RT28xxUsbStaAsicSleepThenAutoWakeup VOID RT28xxUsbMlmeRadioOn(IN PRTMP_ADAPTER pAd); VOID RT28xxUsbMlmeRadioOFF(IN PRTMP_ADAPTER pAd); -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ VOID AsicTurnOffRFClk(IN PRTMP_ADAPTER pAd, IN UCHAR Channel); @@ -4237,7 +4237,7 @@ BOOLEAN RtmpTimerQRemove(IN RTMP_ADAPTER void RtmpTimerQExit(IN RTMP_ADAPTER * pAd); void RtmpTimerQInit(IN RTMP_ADAPTER * pAd); -#endif // RTMP_TIMER_TASK_SUPPORT // +#endif /* RTMP_TIMER_TASK_SUPPORT // */ VOID AsicStaBbpTuning(IN PRTMP_ADAPTER pAd); @@ -4291,7 +4291,7 @@ __inline VOID VIRTUAL_IF_DOWN(PRTMP_ADAP rt28xx_close(pAd->net_dev); return; } -#endif // LINUX // +#endif /* LINUX // */ /* OS Related funciton prototype definitions. @@ -4353,4 +4353,4 @@ int RtmpOSFileRead(IN RTMP_OS_FD osfd, I int RtmpOSFileWrite(IN RTMP_OS_FD osfd, IN char *pDataPtr, IN int writeLen); -#endif // __RTMP_H__ +#endif /* __RTMP_H__ */ Index: b/drivers/staging/rt2860/rtmp_chip.h =================================================================== --- a/drivers/staging/rt2860/rtmp_chip.h +++ b/drivers/staging/rt2860/rtmp_chip.h @@ -42,30 +42,30 @@ #ifdef RT2860 #include "chip/rt2860.h" -#endif // RT2860 // +#endif /* RT2860 // */ #ifdef RT2870 #include "chip/rt2870.h" -#endif // RT2870 // +#endif /* RT2870 // */ #ifdef RT3070 #include "chip/rt3070.h" -#endif // RT3070 // +#endif /* RT3070 // */ #ifdef RT3090 #include "chip/rt3090.h" -#endif // RT3090 // +#endif /* RT3090 // */ -// We will have a cost down version which mac version is 0x3090xxxx -// -// RT3090A facts -// -// a) 2.4 GHz -// b) Replacement for RT3090 -// c) Internal LNA -// d) Interference over channel #14 -// e) New BBP features (e.g., SIG re-modulation) -// +/* We will have a cost down version which mac version is 0x3090xxxx */ +/* */ +/* RT3090A facts */ +/* */ +/* a) 2.4 GHz */ +/* b) Replacement for RT3090 */ +/* c) Internal LNA */ +/* d) Interference over channel #14 */ +/* e) New BBP features (e.g., SIG re-modulation) */ +/* */ #define IS_RT3090A(_pAd) ((((_pAd)->MACVersion & 0xffff0000) == 0x30900000)) -// We will have a cost down version which mac version is 0x3090xxxx +/* We will have a cost down version which mac version is 0x3090xxxx */ #define IS_RT3090(_pAd) ((((_pAd)->MACVersion & 0xffff0000) == 0x30710000) || (IS_RT3090A(_pAd))) #define IS_RT3070(_pAd) (((_pAd)->MACVersion & 0xffff0000) == 0x30700000) @@ -73,28 +73,28 @@ #define IS_RT2070(_pAd) (((_pAd)->RfIcType == RFIC_2020) || ((_pAd)->EFuseTag == 0x27)) #define IS_RT30xx(_pAd) (((_pAd)->MACVersion & 0xfff00000) == 0x30700000||IS_RT3090A(_pAd)) -//#define IS_RT305X(_pAd) ((_pAd)->MACVersion == 0x28720200) +/*#define IS_RT305X(_pAd) ((_pAd)->MACVersion == 0x28720200) */ /* RT3572, 3592, 3562, 3062 share the same MAC version */ #define IS_RT3572(_pAd) (((_pAd)->MACVersion & 0xffff0000) == 0x35720000) #define IS_VERSION_BEFORE_F(_pAd) (((_pAd)->MACVersion&0xffff) <= 0x0211) -// F version is 0x0212, E version is 0x0211. 309x can save more power after F version. +/* F version is 0x0212, E version is 0x0211. 309x can save more power after F version. */ #define IS_VERSION_AFTER_F(_pAd) ((((_pAd)->MACVersion&0xffff) >= 0x0212) || (((_pAd)->b3090ESpecialChip == TRUE))) -// -// RT3390 facts -// -// a) Base on RT3090 (RF IC: RT3020) -// b) 2.4 GHz -// c) 1x1 -// d) Single chip -// e) Internal components: PA and LNA -// -//RT3390,RT3370 +/* */ +/* RT3390 facts */ +/* */ +/* a) Base on RT3090 (RF IC: RT3020) */ +/* b) 2.4 GHz */ +/* c) 1x1 */ +/* d) Single chip */ +/* e) Internal components: PA and LNA */ +/* */ +/*RT3390,RT3370 */ #define IS_RT3390(_pAd) (((_pAd)->MACVersion & 0xFFFF0000) == 0x33900000) -// ------------------------------------------------------ -// PCI registers - base address 0x0000 -// ------------------------------------------------------ +/* ------------------------------------------------------ */ +/* PCI registers - base address 0x0000 */ +/* ------------------------------------------------------ */ #define CHIP_PCI_CFG 0x0000 #define CHIP_PCI_EECTRL 0x0004 #define CHIP_PCI_MCUCTRL 0x0008 @@ -103,15 +103,15 @@ #define RETRY_LIMIT 10 -// ------------------------------------------------------ -// BBP & RF definition -// ------------------------------------------------------ +/* ------------------------------------------------------ */ +/* BBP & RF definition */ +/* ------------------------------------------------------ */ #define BUSY 1 #define IDLE 0 -//------------------------------------------------------------------------- -// EEPROM definition -//------------------------------------------------------------------------- +/*------------------------------------------------------------------------- */ +/* EEPROM definition */ +/*------------------------------------------------------------------------- */ #define EEDO 0x08 #define EEDI 0x04 #define EECS 0x02 @@ -123,11 +123,11 @@ #define EEPROM_EWDS_OPCODE 0x10 #define EEPROM_EWEN_OPCODE 0x13 -#define NUM_EEPROM_BBP_PARMS 19 // Include NIC Config 0, 1, CR, TX ALC step, BBPs +#define NUM_EEPROM_BBP_PARMS 19 /* Include NIC Config 0, 1, CR, TX ALC step, BBPs */ #define NUM_EEPROM_TX_G_PARMS 7 -#define EEPROM_NIC1_OFFSET 0x34 // The address is from NIC config 0, not BBP register ID -#define EEPROM_NIC2_OFFSET 0x36 // The address is from NIC config 0, not BBP register ID -#define EEPROM_BBP_BASE_OFFSET 0xf0 // The address is from NIC config 0, not BBP register ID +#define EEPROM_NIC1_OFFSET 0x34 /* The address is from NIC config 0, not BBP register ID */ +#define EEPROM_NIC2_OFFSET 0x36 /* The address is from NIC config 0, not BBP register ID */ +#define EEPROM_BBP_BASE_OFFSET 0xf0 /* The address is from NIC config 0, not BBP register ID */ #define EEPROM_G_TX_PWR_OFFSET 0x52 #define EEPROM_G_TX2_PWR_OFFSET 0x60 #define EEPROM_LED1_OFFSET 0x3c @@ -139,22 +139,22 @@ #define EEPROM_RSSI_A_OFFSET 0x4a #define EEPROM_TXMIXER_GAIN_5G 0x4c #define EEPROM_DEFINE_MAX_TXPWR 0x4e -#define EEPROM_TXPOWER_BYRATE_20MHZ_2_4G 0xde // 20MHZ 2.4G tx power. -#define EEPROM_TXPOWER_BYRATE_40MHZ_2_4G 0xee // 40MHZ 2.4G tx power. -#define EEPROM_TXPOWER_BYRATE_20MHZ_5G 0xfa // 20MHZ 5G tx power. -#define EEPROM_TXPOWER_BYRATE_40MHZ_5G 0x10a // 40MHZ 5G tx power. +#define EEPROM_TXPOWER_BYRATE_20MHZ_2_4G 0xde /* 20MHZ 2.4G tx power. */ +#define EEPROM_TXPOWER_BYRATE_40MHZ_2_4G 0xee /* 40MHZ 2.4G tx power. */ +#define EEPROM_TXPOWER_BYRATE_20MHZ_5G 0xfa /* 20MHZ 5G tx power. */ +#define EEPROM_TXPOWER_BYRATE_40MHZ_5G 0x10a /* 40MHZ 5G tx power. */ #define EEPROM_A_TX_PWR_OFFSET 0x78 #define EEPROM_A_TX2_PWR_OFFSET 0xa6 -//#define EEPROM_Japan_TX_PWR_OFFSET 0x90 // 802.11j -//#define EEPROM_Japan_TX2_PWR_OFFSET 0xbe -//#define EEPROM_TSSI_REF_OFFSET 0x54 -//#define EEPROM_TSSI_DELTA_OFFSET 0x24 -//#define EEPROM_CCK_TX_PWR_OFFSET 0x62 -//#define EEPROM_CALIBRATE_OFFSET 0x7c +/*#define EEPROM_Japan_TX_PWR_OFFSET 0x90 // 802.11j */ +/*#define EEPROM_Japan_TX2_PWR_OFFSET 0xbe */ +/*#define EEPROM_TSSI_REF_OFFSET 0x54 */ +/*#define EEPROM_TSSI_DELTA_OFFSET 0x24 */ +/*#define EEPROM_CCK_TX_PWR_OFFSET 0x62 */ +/*#define EEPROM_CALIBRATE_OFFSET 0x7c */ #define EEPROM_VERSION_OFFSET 0x02 #define EEPROM_FREQ_OFFSET 0x3a -#define EEPROM_TXPOWER_BYRATE 0xde // 20MHZ power. -#define EEPROM_TXPOWER_DELTA 0x50 // 20MHZ AND 40 MHZ use different power. This is delta in 40MHZ. +#define EEPROM_TXPOWER_BYRATE 0xde /* 20MHZ power. */ +#define EEPROM_TXPOWER_DELTA 0x50 /* 20MHZ AND 40 MHZ use different power. This is delta in 40MHZ. */ #define VALID_EEPROM_VERSION 1 /* @@ -163,13 +163,13 @@ #define RT28xx_EEPROM_READ16(_pAd, _offset, _value) \ (_pAd)->chipOps.eeread((RTMP_ADAPTER *)(_pAd), (USHORT)(_offset), (PUSHORT)&(_value)) -// ------------------------------------------------------------------- -// E2PROM data layout -// ------------------------------------------------------------------- - -// -// MCU_LEDCS: MCU LED Control Setting. -// +/* ------------------------------------------------------------------- */ +/* E2PROM data layout */ +/* ------------------------------------------------------------------- */ + +/* */ +/* MCU_LEDCS: MCU LED Control Setting. */ +/* */ typedef union _MCU_LEDCS_STRUC { struct { UCHAR LedMode:7; @@ -178,14 +178,14 @@ typedef union _MCU_LEDCS_STRUC { UCHAR word; } MCU_LEDCS_STRUC, *PMCU_LEDCS_STRUC; -// -// EEPROM antenna select format -// +/* */ +/* EEPROM antenna select format */ +/* */ typedef union _EEPROM_ANTENNA_STRUC { struct { - USHORT RxPath:4; // 1: 1R, 2: 2R, 3: 3R - USHORT TxPath:4; // 1: 1T, 2: 2T - USHORT RfIcType:4; // see E2PROM document + USHORT RxPath:4; /* 1: 1R, 2: 2R, 3: 3R */ + USHORT TxPath:4; /* 1: 1T, 2: 2T */ + USHORT RfIcType:4; /* see E2PROM document */ USHORT Rsv:4; } field; USHORT word; @@ -193,66 +193,66 @@ typedef union _EEPROM_ANTENNA_STRUC { typedef union _EEPROM_NIC_CINFIG2_STRUC { struct { - USHORT HardwareRadioControl:1; // 1:enable, 0:disable - USHORT DynamicTxAgcControl:1; // - USHORT ExternalLNAForG:1; // - USHORT ExternalLNAForA:1; // external LNA enable for 2.4G - USHORT CardbusAcceleration:1; // !!! NOTE: 0 - enable, 1 - disable + USHORT HardwareRadioControl:1; /* 1:enable, 0:disable */ + USHORT DynamicTxAgcControl:1; /* */ + USHORT ExternalLNAForG:1; /* */ + USHORT ExternalLNAForA:1; /* external LNA enable for 2.4G */ + USHORT CardbusAcceleration:1; /* !!! NOTE: 0 - enable, 1 - disable */ USHORT BW40MSidebandForG:1; USHORT BW40MSidebandForA:1; - USHORT EnableWPSPBC:1; // WPS PBC Control bit - USHORT BW40MAvailForG:1; // 0:enable, 1:disable - USHORT BW40MAvailForA:1; // 0:enable, 1:disable - USHORT Rsv1:1; // must be 0 - USHORT AntDiversity:1; // Antenna diversity - USHORT Rsv2:3; // must be 0 - USHORT DACTestBit:1; // control if driver should patch the DAC issue + USHORT EnableWPSPBC:1; /* WPS PBC Control bit */ + USHORT BW40MAvailForG:1; /* 0:enable, 1:disable */ + USHORT BW40MAvailForA:1; /* 0:enable, 1:disable */ + USHORT Rsv1:1; /* must be 0 */ + USHORT AntDiversity:1; /* Antenna diversity */ + USHORT Rsv2:3; /* must be 0 */ + USHORT DACTestBit:1; /* control if driver should patch the DAC issue */ } field; USHORT word; } EEPROM_NIC_CONFIG2_STRUC, *PEEPROM_NIC_CONFIG2_STRUC; -// -// TX_PWR Value valid range 0xFA(-6) ~ 0x24(36) -// +/* */ +/* TX_PWR Value valid range 0xFA(-6) ~ 0x24(36) */ +/* */ typedef union _EEPROM_TX_PWR_STRUC { struct { - CHAR Byte0; // Low Byte - CHAR Byte1; // High Byte + CHAR Byte0; /* Low Byte */ + CHAR Byte1; /* High Byte */ } field; USHORT word; } EEPROM_TX_PWR_STRUC, *PEEPROM_TX_PWR_STRUC; typedef union _EEPROM_VERSION_STRUC { struct { - UCHAR FaeReleaseNumber; // Low Byte - UCHAR Version; // High Byte + UCHAR FaeReleaseNumber; /* Low Byte */ + UCHAR Version; /* High Byte */ } field; USHORT word; } EEPROM_VERSION_STRUC, *PEEPROM_VERSION_STRUC; typedef union _EEPROM_LED_STRUC { struct { - USHORT PolarityRDY_G:1; // Polarity RDY_G setting. - USHORT PolarityRDY_A:1; // Polarity RDY_A setting. - USHORT PolarityACT:1; // Polarity ACT setting. - USHORT PolarityGPIO_0:1; // Polarity GPIO#0 setting. - USHORT PolarityGPIO_1:1; // Polarity GPIO#1 setting. - USHORT PolarityGPIO_2:1; // Polarity GPIO#2 setting. - USHORT PolarityGPIO_3:1; // Polarity GPIO#3 setting. - USHORT PolarityGPIO_4:1; // Polarity GPIO#4 setting. - USHORT LedMode:5; // Led mode. - USHORT Rsvd:3; // Reserved + USHORT PolarityRDY_G:1; /* Polarity RDY_G setting. */ + USHORT PolarityRDY_A:1; /* Polarity RDY_A setting. */ + USHORT PolarityACT:1; /* Polarity ACT setting. */ + USHORT PolarityGPIO_0:1; /* Polarity GPIO#0 setting. */ + USHORT PolarityGPIO_1:1; /* Polarity GPIO#1 setting. */ + USHORT PolarityGPIO_2:1; /* Polarity GPIO#2 setting. */ + USHORT PolarityGPIO_3:1; /* Polarity GPIO#3 setting. */ + USHORT PolarityGPIO_4:1; /* Polarity GPIO#4 setting. */ + USHORT LedMode:5; /* Led mode. */ + USHORT Rsvd:3; /* Reserved */ } field; USHORT word; } EEPROM_LED_STRUC, *PEEPROM_LED_STRUC; typedef union _EEPROM_TXPOWER_DELTA_STRUC { struct { - UCHAR DeltaValue:6; // Tx Power dalta value (MAX=4) - UCHAR Type:1; // 1: plus the delta value, 0: minus the delta value - UCHAR TxPowerEnable:1; // Enable + UCHAR DeltaValue:6; /* Tx Power dalta value (MAX=4) */ + UCHAR Type:1; /* 1: plus the delta value, 0: minus the delta value */ + UCHAR TxPowerEnable:1; /* Enable */ } field; UCHAR value; } EEPROM_TXPOWER_DELTA_STRUC, *PEEPROM_TXPOWER_DELTA_STRUC; -#endif // __RTMP_CHIP_H__ // +#endif /* __RTMP_CHIP_H__ // */ Index: b/drivers/staging/rt2860/rtmp_ckipmic.h =================================================================== --- a/drivers/staging/rt2860/rtmp_ckipmic.h +++ b/drivers/staging/rt2860/rtmp_ckipmic.h @@ -60,4 +60,4 @@ VOID shift_row(IN PUCHAR in, OUT PUCHAR VOID mix_column(IN PUCHAR in, OUT PUCHAR out); -#endif //__RTMP_CKIPMIC_H__ +#endif /*__RTMP_CKIPMIC_H__ */ Index: b/drivers/staging/rt2860/rtmp_def.h =================================================================== --- a/drivers/staging/rt2860/rtmp_def.h +++ b/drivers/staging/rt2860/rtmp_def.h @@ -41,9 +41,9 @@ #include "oid.h" -// -// Debug information verbosity: lower values indicate higher urgency -// +/* */ +/* Debug information verbosity: lower values indicate higher urgency */ +/* */ #define RT_DEBUG_OFF 0 #define RT_DEBUG_ERROR 1 #define RT_DEBUG_WARN 2 @@ -55,15 +55,15 @@ #define NIC_DBG_STRING ("**RT28xx**") #ifdef RTMP_MAC_USB -#define TX_RING_SIZE 8 // 1 +#define TX_RING_SIZE 8 /* 1 */ #define PRIO_RING_SIZE 8 -#define MGMT_RING_SIZE 32 // PRIO_RING_SIZE +#define MGMT_RING_SIZE 32 /* PRIO_RING_SIZE */ #define RX_RING_SIZE 8 #define MAX_TX_PROCESS 4 #define LOCAL_TXBUF_SIZE 2048 -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ -//#define PACKED +/*#define PACKED */ #define RALINK_2883_VERSION ((UINT32)0x28830300) #define RALINK_2880E_VERSION ((UINT32)0x28720200) @@ -71,38 +71,38 @@ #define MAX_RX_PKT_LEN 1520 -// -// Entry number for each DMA descriptor ring -// +/* */ +/* Entry number for each DMA descriptor ring */ +/* */ #ifdef RTMP_MAC_PCI -#define TX_RING_SIZE 64 //64 +#define TX_RING_SIZE 64 /*64 */ #define MGMT_RING_SIZE 128 -#define RX_RING_SIZE 128 //64 -#define MAX_TX_PROCESS TX_RING_SIZE //8 +#define RX_RING_SIZE 128 /*64 */ +#define MAX_TX_PROCESS TX_RING_SIZE /*8 */ #define MAX_DMA_DONE_PROCESS TX_RING_SIZE -#define MAX_TX_DONE_PROCESS TX_RING_SIZE //8 +#define MAX_TX_DONE_PROCESS TX_RING_SIZE /*8 */ #define LOCAL_TXBUF_SIZE 2 -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ -#define MAX_RX_PROCESS 128 //64 //32 +#define MAX_RX_PROCESS 128 /*64 //32 */ #define NUM_OF_LOCAL_TXBUF 2 #define TXD_SIZE 16 #define TXWI_SIZE 16 #define RXD_SIZE 16 #define RXWI_SIZE 16 -// TXINFO_SIZE + TXWI_SIZE + 802.11 Header Size + AMSDU sub frame header -#define TX_DMA_1ST_BUFFER_SIZE 96 // only the 1st physical buffer is pre-allocated -#define MGMT_DMA_BUFFER_SIZE 1536 //2048 -#define RX_BUFFER_AGGRESIZE 3840 //3904 //3968 //4096 //2048 //4096 -#define RX_BUFFER_NORMSIZE 3840 //3904 //3968 //4096 //2048 //4096 +/* TXINFO_SIZE + TXWI_SIZE + 802.11 Header Size + AMSDU sub frame header */ +#define TX_DMA_1ST_BUFFER_SIZE 96 /* only the 1st physical buffer is pre-allocated */ +#define MGMT_DMA_BUFFER_SIZE 1536 /*2048 */ +#define RX_BUFFER_AGGRESIZE 3840 /*3904 //3968 //4096 //2048 //4096 */ +#define RX_BUFFER_NORMSIZE 3840 /*3904 //3968 //4096 //2048 //4096 */ #define TX_BUFFER_NORMSIZE RX_BUFFER_NORMSIZE -#define MAX_FRAME_SIZE 2346 // Maximum 802.11 frame size -#define MAX_AGGREGATION_SIZE 3840 //3904 //3968 //4096 +#define MAX_FRAME_SIZE 2346 /* Maximum 802.11 frame size */ +#define MAX_AGGREGATION_SIZE 3840 /*3904 //3968 //4096 */ #define MAX_NUM_OF_TUPLE_CACHE 2 #define MAX_MCAST_LIST_SIZE 32 #define MAX_LEN_OF_VENDOR_DESC 64 -//#define MAX_SIZE_OF_MCAST_PSQ (NUM_OF_LOCAL_TXBUF >> 2) // AP won't spend more than 1/4 of total buffers on M/BCAST PSQ +/*#define MAX_SIZE_OF_MCAST_PSQ (NUM_OF_LOCAL_TXBUF >> 2) // AP won't spend more than 1/4 of total buffers on M/BCAST PSQ */ #define MAX_SIZE_OF_MCAST_PSQ 32 #define MAX_RX_PROCESS_CNT (RX_RING_SIZE) @@ -125,27 +125,27 @@ And in rt_main_end.c, clConfig.clNum = RX_RING_SIZE * 3; is changed to clConfig.clNum = RX_RING_SIZE * 4; */ -// TODO: For VxWorks the size is 256. Shall we cahnge the value as 256 for all OS????? -#define MAX_PACKETS_IN_QUEUE (512) //(512) // to pass WMM A5-WPAPSK +/* TODO: For VxWorks the size is 256. Shall we cahnge the value as 256 for all OS????? */ +#define MAX_PACKETS_IN_QUEUE (512) /*(512) // to pass WMM A5-WPAPSK */ #define MAX_PACKETS_IN_MCAST_PS_QUEUE 32 -#define MAX_PACKETS_IN_PS_QUEUE 128 //32 +#define MAX_PACKETS_IN_PS_QUEUE 128 /*32 */ #define WMM_NUM_OF_AC 4 /* AC0, AC1, AC2, and AC3 */ #ifdef RTMP_EFUSE_SUPPORT -//2008/09/11:KH add to support efuse<-- +/*2008/09/11:KH add to support efuse<-- */ #define MAX_EEPROM_BIN_FILE_SIZE 1024 #define EFUSE_BUFFER_PATH "/tmp/RT30xxEEPROM.bin" -//2008/09/11:KH add to support efuse--> -#endif // RTMP_EFUSE_SUPPORT // +/*2008/09/11:KH add to support efuse--> */ +#endif /* RTMP_EFUSE_SUPPORT // */ -// RxFilter +/* RxFilter */ #define STANORMAL 0x17f97 #define APNORMAL 0x15f97 #define PSPXLINK 0x17f93 -// -// RTMP_ADAPTER flags -// +/* */ +/* RTMP_ADAPTER flags */ +/* */ #define fRTMP_ADAPTER_MAP_REGISTER 0x00000001 #define fRTMP_ADAPTER_INTERRUPT_IN_USE 0x00000002 #define fRTMP_ADAPTER_HARDWARE_ERROR 0x00000004 @@ -171,13 +171,13 @@ #define fRTMP_ADAPTER_SCAN_2040 0x04000000 #define fRTMP_ADAPTER_RADIO_MEASUREMENT 0x08000000 -#define fRTMP_ADAPTER_START_UP 0x10000000 //Devive already initialized and enabled Tx/Rx. +#define fRTMP_ADAPTER_START_UP 0x10000000 /*Devive already initialized and enabled Tx/Rx. */ #define fRTMP_ADAPTER_MEDIA_STATE_CHANGE 0x20000000 #define fRTMP_ADAPTER_IDLE_RADIO_OFF 0x40000000 -// -// STA operation status flags -// +/* */ +/* STA operation status flags */ +/* */ #define fOP_STATUS_INFRA_ON 0x00000001 #define fOP_STATUS_ADHOC_ON 0x00000002 #define fOP_STATUS_BG_PROTECTION_INUSED 0x00000004 @@ -187,8 +187,8 @@ #define fOP_STATUS_MEDIA_STATE_CONNECTED 0x00000080 #define fOP_STATUS_WMM_INUSED 0x00000100 #define fOP_STATUS_AGGREGATION_INUSED 0x00000200 -#define fOP_STATUS_DOZE 0x00000400 // debug purpose -#define fOP_STATUS_PIGGYBACK_INUSED 0x00000800 // piggy-back, and aggregation +#define fOP_STATUS_DOZE 0x00000400 /* debug purpose */ +#define fOP_STATUS_PIGGYBACK_INUSED 0x00000800 /* piggy-back, and aggregation */ #define fOP_STATUS_APSD_INUSED 0x00001000 #define fOP_STATUS_TX_AMSDU_INUSED 0x00002000 #define fOP_STATUS_MAX_RETRY_ENABLED 0x00004000 @@ -196,25 +196,25 @@ #define fOP_STATUS_PCIE_DEVICE 0x00020000 #define fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE fOP_STATUS_PCIE_DEVICE -// -// RTMP_ADAPTER PSFlags : related to advanced power save. -// -// Indicate whether driver can go to sleep mode from now. This flag is useful AFTER link up +/* */ +/* RTMP_ADAPTER PSFlags : related to advanced power save. */ +/* */ +/* Indicate whether driver can go to sleep mode from now. This flag is useful AFTER link up */ #define fRTMP_PS_CAN_GO_SLEEP 0x00000001 -// Indicate whether driver has issue a LinkControl command to PCIe L1 +/* Indicate whether driver has issue a LinkControl command to PCIe L1 */ #define fRTMP_PS_SET_PCI_CLK_OFF_COMMAND 0x00000002 -// Indicate driver should disable kick off hardware to send packets from now. +/* Indicate driver should disable kick off hardware to send packets from now. */ #define fRTMP_PS_DISABLE_TX 0x00000004 -// Indicate driver should IMMEDIATELY fo to sleep after receiving AP's beacon in which doesn't indicate unicate nor multicast packets for me -//. This flag is used ONLY in RTMPHandleRxDoneInterrupt routine. +/* Indicate driver should IMMEDIATELY fo to sleep after receiving AP's beacon in which doesn't indicate unicate nor multicast packets for me */ +/*. This flag is used ONLY in RTMPHandleRxDoneInterrupt routine. */ #define fRTMP_PS_GO_TO_SLEEP_NOW 0x00000008 -#define fRTMP_PS_TOGGLE_L1 0x00000010 // Use Toggle L1 mechanism for rt28xx PCIe +#define fRTMP_PS_TOGGLE_L1 0x00000010 /* Use Toggle L1 mechanism for rt28xx PCIe */ #ifdef RT3090 #define WAKE_MCU_CMD 0x31 #define SLEEP_MCU_CMD 0x30 #define RFOFF_MCU_CMD 0x35 -#endif // RT3090 // +#endif /* RT3090 // */ #define CCKSETPROTECT 0x1 #define OFDMSETPROTECT 0x2 @@ -224,12 +224,12 @@ #define GR40SETPROTECT 0x20 #define ALLN_SETPROTECT (GR40SETPROTECT | GF20SETPROTECT | MM40SETPROTECT | MM20SETPROTECT) -// -// AP's client table operation status flags -// -#define fCLIENT_STATUS_WMM_CAPABLE 0x00000001 // CLIENT can parse QOS DATA frame -#define fCLIENT_STATUS_AGGREGATION_CAPABLE 0x00000002 // CLIENT can receive Ralink's proprietary TX aggregation frame -#define fCLIENT_STATUS_PIGGYBACK_CAPABLE 0x00000004 // CLIENT support piggy-back +/* */ +/* AP's client table operation status flags */ +/* */ +#define fCLIENT_STATUS_WMM_CAPABLE 0x00000001 /* CLIENT can parse QOS DATA frame */ +#define fCLIENT_STATUS_AGGREGATION_CAPABLE 0x00000002 /* CLIENT can receive Ralink's proprietary TX aggregation frame */ +#define fCLIENT_STATUS_PIGGYBACK_CAPABLE 0x00000004 /* CLIENT support piggy-back */ #define fCLIENT_STATUS_AMSDU_INUSED 0x00000008 #define fCLIENT_STATUS_SGI20_CAPABLE 0x00000010 #define fCLIENT_STATUS_SGI40_CAPABLE 0x00000020 @@ -241,45 +241,45 @@ #define fCLIENT_STATUS_APSD_CAPABLE 0x00000800 /* UAPSD STATION */ #define fCLIENT_STATUS_RALINK_CHIPSET 0x00100000 -// -// STA configuration flags -// +/* */ +/* STA configuration flags */ +/* */ -// 802.11n Operating Mode Definition. 0-3 also used in ASICUPdateProtect switch case +/* 802.11n Operating Mode Definition. 0-3 also used in ASICUPdateProtect switch case */ #define HT_NO_PROTECT 0 #define HT_LEGACY_PROTECT 1 #define HT_40_PROTECT 2 #define HT_2040_PROTECT 3 #define HT_RTSCTS_6M 7 -//following is our own definition in order to turn on our ASIC protection register in INFRASTRUCTURE. -#define HT_ATHEROS 8 // rt2860c has problem with atheros chip. we need to turn on RTS/CTS . -#define HT_FORCERTSCTS 9 // Force turn on RTS/CTS first. then go to evaluate if this force RTS is necessary. - -// -// RX Packet Filter control flags. Apply on pAd->PacketFilter -// +/*following is our own definition in order to turn on our ASIC protection register in INFRASTRUCTURE. */ +#define HT_ATHEROS 8 /* rt2860c has problem with atheros chip. we need to turn on RTS/CTS . */ +#define HT_FORCERTSCTS 9 /* Force turn on RTS/CTS first. then go to evaluate if this force RTS is necessary. */ + +/* */ +/* RX Packet Filter control flags. Apply on pAd->PacketFilter */ +/* */ #define fRX_FILTER_ACCEPT_DIRECT NDIS_PACKET_TYPE_DIRECTED #define fRX_FILTER_ACCEPT_MULTICAST NDIS_PACKET_TYPE_MULTICAST #define fRX_FILTER_ACCEPT_BROADCAST NDIS_PACKET_TYPE_BROADCAST #define fRX_FILTER_ACCEPT_ALL_MULTICAST NDIS_PACKET_TYPE_ALL_MULTICAST #define fRX_FILTER_ACCEPT_PROMISCUOUS NDIS_PACKET_TYPE_PROMISCUOUS -// -// Error code section -// -// NDIS_ERROR_CODE_ADAPTER_NOT_FOUND +/* */ +/* Error code section */ +/* */ +/* NDIS_ERROR_CODE_ADAPTER_NOT_FOUND */ #define ERRLOG_READ_PCI_SLOT_FAILED 0x00000101L #define ERRLOG_WRITE_PCI_SLOT_FAILED 0x00000102L #define ERRLOG_VENDOR_DEVICE_NOMATCH 0x00000103L -// NDIS_ERROR_CODE_ADAPTER_DISABLED +/* NDIS_ERROR_CODE_ADAPTER_DISABLED */ #define ERRLOG_BUS_MASTER_DISABLED 0x00000201L -// NDIS_ERROR_CODE_UNSUPPORTED_CONFIGURATION +/* NDIS_ERROR_CODE_UNSUPPORTED_CONFIGURATION */ #define ERRLOG_INVALID_SPEED_DUPLEX 0x00000301L #define ERRLOG_SET_SECONDARY_FAILED 0x00000302L -// NDIS_ERROR_CODE_OUT_OF_RESOURCES +/* NDIS_ERROR_CODE_OUT_OF_RESOURCES */ #define ERRLOG_OUT_OF_MEMORY 0x00000401L #define ERRLOG_OUT_OF_SHARED_MEMORY 0x00000402L #define ERRLOG_OUT_OF_MAP_REGISTERS 0x00000403L @@ -289,21 +289,21 @@ #define ERRLOG_OUT_OF_NDIS_PACKET 0x00000407L #define ERRLOG_OUT_OF_LOOKASIDE_MEMORY 0x00000408L -// NDIS_ERROR_CODE_HARDWARE_FAILURE +/* NDIS_ERROR_CODE_HARDWARE_FAILURE */ #define ERRLOG_SELFTEST_FAILED 0x00000501L #define ERRLOG_INITIALIZE_ADAPTER 0x00000502L #define ERRLOG_REMOVE_MINIPORT 0x00000503L -// NDIS_ERROR_CODE_RESOURCE_CONFLICT +/* NDIS_ERROR_CODE_RESOURCE_CONFLICT */ #define ERRLOG_MAP_IO_SPACE 0x00000601L #define ERRLOG_QUERY_ADAPTER_RESOURCES 0x00000602L #define ERRLOG_NO_IO_RESOURCE 0x00000603L #define ERRLOG_NO_INTERRUPT_RESOURCE 0x00000604L #define ERRLOG_NO_MEMORY_RESOURCE 0x00000605L -// WDS definition +/* WDS definition */ #define MAX_WDS_ENTRY 4 -#define WDS_PAIRWISE_KEY_OFFSET 60 // WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table +#define WDS_PAIRWISE_KEY_OFFSET 60 /* WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table */ #define WDS_DISABLE_MODE 0 #define WDS_RESTRICT_MODE 1 @@ -319,7 +319,7 @@ #ifdef MBSS_SUPPORT #undef MAX_MBSSID_NUM #define MAX_MBSSID_NUM (8 - MAX_MESH_NUM - MAX_APCLI_NUM) -#endif // MBSS_SUPPORT // +#endif /* MBSS_SUPPORT // */ /* sanity check for apidx */ #define MBSS_MR_APIDX_SANITY_CHECK(apidx) \ @@ -333,10 +333,10 @@ #define FIRST_MBSSID 1 #define MAX_BEACON_SIZE 512 -// If the MAX_MBSSID_NUM is larger than 6, -// it shall reserve some WCID space(wcid 222~253) for beacon frames. -// - these wcid 238~253 are reserved for beacon#6(ra6). -// - these wcid 222~237 are reserved for beacon#7(ra7). +/* If the MAX_MBSSID_NUM is larger than 6, */ +/* it shall reserve some WCID space(wcid 222~253) for beacon frames. */ +/* - these wcid 238~253 are reserved for beacon#6(ra6). */ +/* - these wcid 222~237 are reserved for beacon#7(ra7). */ #if defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 8) #define HW_RESERVED_WCID 222 #elif defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 7) @@ -345,17 +345,17 @@ #define HW_RESERVED_WCID 255 #endif -// Then dedicate wcid of DFS and Carrier-Sense. +/* Then dedicate wcid of DFS and Carrier-Sense. */ #define DFS_CTS_WCID (HW_RESERVED_WCID - 1) #define CS_CTS_WCID (HW_RESERVED_WCID - 2) #define LAST_SPECIFIC_WCID (HW_RESERVED_WCID - 2) -// If MAX_MBSSID_NUM is 8, the maximum available wcid for the associated STA is 211. -// If MAX_MBSSID_NUM is 7, the maximum available wcid for the associated STA is 228. +/* If MAX_MBSSID_NUM is 8, the maximum available wcid for the associated STA is 211. */ +/* If MAX_MBSSID_NUM is 7, the maximum available wcid for the associated STA is 228. */ #define MAX_AVAILABLE_CLIENT_WCID (LAST_SPECIFIC_WCID - MAX_MBSSID_NUM - 1) -// TX need WCID to find Cipher Key -// these wcid 212 ~ 219 are reserved for bc/mc packets if MAX_MBSSID_NUM is 8. +/* TX need WCID to find Cipher Key */ +/* these wcid 212 ~ 219 are reserved for bc/mc packets if MAX_MBSSID_NUM is 8. */ #define GET_GroupKey_WCID(__wcid, __bssidx) \ { \ __wcid = LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM) + __bssidx; \ @@ -363,7 +363,7 @@ #define IsGroupKeyWCID(__wcid) (((__wcid) < LAST_SPECIFIC_WCID) && ((__wcid) >= (LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM)))) -// definition to support multiple BSSID +/* definition to support multiple BSSID */ #define BSS0 0 #define BSS1 1 #define BSS2 2 @@ -373,26 +373,26 @@ #define BSS6 6 #define BSS7 7 -//============================================================ -// Length definitions +/*============================================================ */ +/* Length definitions */ #define PEER_KEY_NO 2 #define MAC_ADDR_LEN 6 #define TIMESTAMP_LEN 8 -#define MAX_LEN_OF_SUPPORTED_RATES MAX_LENGTH_OF_SUPPORT_RATES // 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54 -#define MAX_LEN_OF_KEY 32 // 32 octets == 256 bits, Redefine for WPA -#define MAX_NUM_OF_CHANNELS MAX_NUM_OF_CHS // 14 channels @2.4G + 12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination -#define MAX_NUM_OF_11JCHANNELS 20 // 14 channels @2.4G + 12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination +#define MAX_LEN_OF_SUPPORTED_RATES MAX_LENGTH_OF_SUPPORT_RATES /* 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54 */ +#define MAX_LEN_OF_KEY 32 /* 32 octets == 256 bits, Redefine for WPA */ +#define MAX_NUM_OF_CHANNELS MAX_NUM_OF_CHS /* 14 channels @2.4G + 12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination */ +#define MAX_NUM_OF_11JCHANNELS 20 /* 14 channels @2.4G + 12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination */ #define MAX_LEN_OF_SSID 32 #define CIPHER_TEXT_LEN 128 #define HASH_TABLE_SIZE 256 -#define MAX_VIE_LEN 1024 // New for WPA cipher suite variable IE sizes. +#define MAX_VIE_LEN 1024 /* New for WPA cipher suite variable IE sizes. */ #define MAX_SUPPORT_MCS 32 #define MAX_NUM_OF_BBP_LATCH 140 -//============================================================ -// ASIC WCID Table definition. -//============================================================ -#define BSSID_WCID 1 // in infra mode, always put bssid with this WCID +/*============================================================ */ +/* ASIC WCID Table definition. */ +/*============================================================ */ +#define BSSID_WCID 1 /* in infra mode, always put bssid with this WCID */ #define MCAST_WCID 0x0 #define BSS0Mcast_WCID 0x0 #define BSS1Mcast_WCID 0xf8 @@ -406,7 +406,7 @@ #define MAX_NUM_OF_ACL_LIST MAX_NUMBER_OF_ACL -#define MAX_LEN_OF_MAC_TABLE MAX_NUMBER_OF_MAC // if MAX_MBSSID_NUM is 8, this value can't be larger than 211 +#define MAX_LEN_OF_MAC_TABLE MAX_NUMBER_OF_MAC /* if MAX_MBSSID_NUM is 8, this value can't be larger than 211 */ #if MAX_LEN_OF_MAC_TABLE>MAX_AVAILABLE_CLIENT_WCID #error MAX_LEN_OF_MAC_TABLE can not be larger than MAX_AVAILABLE_CLIENT_WCID!!!! @@ -419,38 +419,38 @@ #define NUM_OF_TID 8 #define MAX_AID_BA 4 -#define MAX_LEN_OF_BA_REC_TABLE ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2) // (NUM_OF_TID*MAX_AID_BA + 32) //Block ACK recipient -#define MAX_LEN_OF_BA_ORI_TABLE ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2) // (NUM_OF_TID*MAX_AID_BA + 32) // Block ACK originator +#define MAX_LEN_OF_BA_REC_TABLE ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2) /* (NUM_OF_TID*MAX_AID_BA + 32) //Block ACK recipient */ +#define MAX_LEN_OF_BA_ORI_TABLE ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2) /* (NUM_OF_TID*MAX_AID_BA + 32) // Block ACK originator */ #define MAX_LEN_OF_BSS_TABLE 64 #define MAX_REORDERING_MPDU_NUM 512 -// key related definitions +/* key related definitions */ #define SHARE_KEY_NUM 4 -#define MAX_LEN_OF_SHARE_KEY 16 // byte count -#define MAX_LEN_OF_PEER_KEY 16 // byte count -#define PAIRWISE_KEY_NUM 64 // in MAC ASIC pairwise key table +#define MAX_LEN_OF_SHARE_KEY 16 /* byte count */ +#define MAX_LEN_OF_PEER_KEY 16 /* byte count */ +#define PAIRWISE_KEY_NUM 64 /* in MAC ASIC pairwise key table */ #define GROUP_KEY_NUM 4 #define PMK_LEN 32 -#define WDS_PAIRWISE_KEY_OFFSET 60 // WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table -#define PMKID_NO 4 // Number of PMKID saved supported +#define WDS_PAIRWISE_KEY_OFFSET 60 /* WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table */ +#define PMKID_NO 4 /* Number of PMKID saved supported */ #define MAX_LEN_OF_MLME_BUFFER 2048 -// power status related definitions +/* power status related definitions */ #define PWR_ACTIVE 0 #define PWR_SAVE 1 -#define PWR_MMPS 2 //MIMO power save +#define PWR_MMPS 2 /*MIMO power save */ -// Auth and Assoc mode related definitions +/* Auth and Assoc mode related definitions */ #define AUTH_MODE_OPEN 0x00 #define AUTH_MODE_KEY 0x01 -// BSS Type definitions -#define BSS_ADHOC 0 // = Ndis802_11IBSS -#define BSS_INFRA 1 // = Ndis802_11Infrastructure -#define BSS_ANY 2 // = Ndis802_11AutoUnknown -#define BSS_MONITOR 3 // = Ndis802_11Monitor +/* BSS Type definitions */ +#define BSS_ADHOC 0 /* = Ndis802_11IBSS */ +#define BSS_INFRA 1 /* = Ndis802_11Infrastructure */ +#define BSS_ANY 2 /* = Ndis802_11AutoUnknown */ +#define BSS_MONITOR 3 /* = Ndis802_11Monitor */ -// Reason code definitions +/* Reason code definitions */ #define REASON_RESERVED 0 #define REASON_UNSPECIFY 1 #define REASON_NO_LONGER_VALID 2 @@ -485,7 +485,7 @@ #define REASON_QOS_REQUEST_TIMEOUT 39 #define REASON_QOS_CIPHER_NOT_SUPPORT 45 -// Status code definitions +/* Status code definitions */ #define MLME_SUCCESS 0 #define MLME_UNSPECIFY_FAIL 1 #define MLME_CANNOT_SUPPORT_CAP 10 @@ -517,7 +517,7 @@ #define MLME_STATE_MACHINE_REJECT 0x53 #define MLME_MAC_TABLE_FAIL 0x54 -// IE code +/* IE code */ #define IE_SSID 0 #define IE_SUPP_RATES 1 #define IE_FH_PARM 2 @@ -525,83 +525,83 @@ #define IE_CF_PARM 4 #define IE_TIM 5 #define IE_IBSS_PARM 6 -#define IE_COUNTRY 7 // 802.11d -#define IE_802_11D_REQUEST 10 // 802.11d -#define IE_QBSS_LOAD 11 // 802.11e d9 -#define IE_EDCA_PARAMETER 12 // 802.11e d9 -#define IE_TSPEC 13 // 802.11e d9 -#define IE_TCLAS 14 // 802.11e d9 -#define IE_SCHEDULE 15 // 802.11e d9 +#define IE_COUNTRY 7 /* 802.11d */ +#define IE_802_11D_REQUEST 10 /* 802.11d */ +#define IE_QBSS_LOAD 11 /* 802.11e d9 */ +#define IE_EDCA_PARAMETER 12 /* 802.11e d9 */ +#define IE_TSPEC 13 /* 802.11e d9 */ +#define IE_TCLAS 14 /* 802.11e d9 */ +#define IE_SCHEDULE 15 /* 802.11e d9 */ #define IE_CHALLENGE_TEXT 16 -#define IE_POWER_CONSTRAINT 32 // 802.11h d3.3 -#define IE_POWER_CAPABILITY 33 // 802.11h d3.3 -#define IE_TPC_REQUEST 34 // 802.11h d3.3 -#define IE_TPC_REPORT 35 // 802.11h d3.3 -#define IE_SUPP_CHANNELS 36 // 802.11h d3.3 -#define IE_CHANNEL_SWITCH_ANNOUNCEMENT 37 // 802.11h d3.3 -#define IE_MEASUREMENT_REQUEST 38 // 802.11h d3.3 -#define IE_MEASUREMENT_REPORT 39 // 802.11h d3.3 -#define IE_QUIET 40 // 802.11h d3.3 -#define IE_IBSS_DFS 41 // 802.11h d3.3 -#define IE_ERP 42 // 802.11g -#define IE_TS_DELAY 43 // 802.11e d9 -#define IE_TCLAS_PROCESSING 44 // 802.11e d9 -#define IE_QOS_CAPABILITY 46 // 802.11e d6 -#define IE_HT_CAP 45 // 802.11n d1. HT CAPABILITY. ELEMENT ID TBD -#define IE_AP_CHANNEL_REPORT 51 // 802.11k d6 -#define IE_HT_CAP2 52 // 802.11n d1. HT CAPABILITY. ELEMENT ID TBD -#define IE_RSN 48 // 802.11i d3.0 -#define IE_WPA2 48 // WPA2 -#define IE_EXT_SUPP_RATES 50 // 802.11g -#define IE_SUPP_REG_CLASS 59 // 802.11y. Supported regulatory classes. -#define IE_EXT_CHANNEL_SWITCH_ANNOUNCEMENT 60 // 802.11n -#define IE_ADD_HT 61 // 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD -#define IE_ADD_HT2 53 // 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD - -// For 802.11n D3.03 -//#define IE_NEW_EXT_CHA_OFFSET 62 // 802.11n d1. New extension channel offset elemet -#define IE_SECONDARY_CH_OFFSET 62 // 802.11n D3.03 Secondary Channel Offset element -#define IE_WAPI 68 // WAPI information element -#define IE_2040_BSS_COEXIST 72 // 802.11n D3.0.3 -#define IE_2040_BSS_INTOLERANT_REPORT 73 // 802.11n D3.03 -#define IE_OVERLAPBSS_SCAN_PARM 74 // 802.11n D3.03 -#define IE_EXT_CAPABILITY 127 // 802.11n D3.03 - -#define IE_WPA 221 // WPA -#define IE_VENDOR_SPECIFIC 221 // Wifi WMM (WME) - -#define OUI_BROADCOM_HT 51 // -#define OUI_BROADCOM_HTADD 52 // -#define OUI_PREN_HT_CAP 51 // -#define OUI_PREN_ADD_HT 52 // - -// CCX information -#define IE_AIRONET_CKIP 133 // CCX1.0 ID 85H for CKIP -#define IE_AP_TX_POWER 150 // CCX 2.0 for AP transmit power -#define IE_MEASUREMENT_CAPABILITY 221 // CCX 2.0 +#define IE_POWER_CONSTRAINT 32 /* 802.11h d3.3 */ +#define IE_POWER_CAPABILITY 33 /* 802.11h d3.3 */ +#define IE_TPC_REQUEST 34 /* 802.11h d3.3 */ +#define IE_TPC_REPORT 35 /* 802.11h d3.3 */ +#define IE_SUPP_CHANNELS 36 /* 802.11h d3.3 */ +#define IE_CHANNEL_SWITCH_ANNOUNCEMENT 37 /* 802.11h d3.3 */ +#define IE_MEASUREMENT_REQUEST 38 /* 802.11h d3.3 */ +#define IE_MEASUREMENT_REPORT 39 /* 802.11h d3.3 */ +#define IE_QUIET 40 /* 802.11h d3.3 */ +#define IE_IBSS_DFS 41 /* 802.11h d3.3 */ +#define IE_ERP 42 /* 802.11g */ +#define IE_TS_DELAY 43 /* 802.11e d9 */ +#define IE_TCLAS_PROCESSING 44 /* 802.11e d9 */ +#define IE_QOS_CAPABILITY 46 /* 802.11e d6 */ +#define IE_HT_CAP 45 /* 802.11n d1. HT CAPABILITY. ELEMENT ID TBD */ +#define IE_AP_CHANNEL_REPORT 51 /* 802.11k d6 */ +#define IE_HT_CAP2 52 /* 802.11n d1. HT CAPABILITY. ELEMENT ID TBD */ +#define IE_RSN 48 /* 802.11i d3.0 */ +#define IE_WPA2 48 /* WPA2 */ +#define IE_EXT_SUPP_RATES 50 /* 802.11g */ +#define IE_SUPP_REG_CLASS 59 /* 802.11y. Supported regulatory classes. */ +#define IE_EXT_CHANNEL_SWITCH_ANNOUNCEMENT 60 /* 802.11n */ +#define IE_ADD_HT 61 /* 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD */ +#define IE_ADD_HT2 53 /* 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD */ + +/* For 802.11n D3.03 */ +/*#define IE_NEW_EXT_CHA_OFFSET 62 // 802.11n d1. New extension channel offset elemet */ +#define IE_SECONDARY_CH_OFFSET 62 /* 802.11n D3.03 Secondary Channel Offset element */ +#define IE_WAPI 68 /* WAPI information element */ +#define IE_2040_BSS_COEXIST 72 /* 802.11n D3.0.3 */ +#define IE_2040_BSS_INTOLERANT_REPORT 73 /* 802.11n D3.03 */ +#define IE_OVERLAPBSS_SCAN_PARM 74 /* 802.11n D3.03 */ +#define IE_EXT_CAPABILITY 127 /* 802.11n D3.03 */ + +#define IE_WPA 221 /* WPA */ +#define IE_VENDOR_SPECIFIC 221 /* Wifi WMM (WME) */ + +#define OUI_BROADCOM_HT 51 /* */ +#define OUI_BROADCOM_HTADD 52 /* */ +#define OUI_PREN_HT_CAP 51 /* */ +#define OUI_PREN_ADD_HT 52 /* */ + +/* CCX information */ +#define IE_AIRONET_CKIP 133 /* CCX1.0 ID 85H for CKIP */ +#define IE_AP_TX_POWER 150 /* CCX 2.0 for AP transmit power */ +#define IE_MEASUREMENT_CAPABILITY 221 /* CCX 2.0 */ #define IE_CCX_V2 221 -#define IE_AIRONET_IPADDRESS 149 // CCX ID 95H for IP Address -#define IE_AIRONET_CCKMREASSOC 156 // CCX ID 9CH for CCKM Reassociation Request element +#define IE_AIRONET_IPADDRESS 149 /* CCX ID 95H for IP Address */ +#define IE_AIRONET_CCKMREASSOC 156 /* CCX ID 9CH for CCKM Reassociation Request element */ #define CKIP_NEGOTIATION_LENGTH 30 #define AIRONET_IPADDRESS_LENGTH 10 #define AIRONET_CCKMREASSOC_LENGTH 24 -// ======================================================== -// MLME state machine definition -// ======================================================== +/* ======================================================== */ +/* MLME state machine definition */ +/* ======================================================== */ -// STA MLME state mahcines +/* STA MLME state mahcines */ #define ASSOC_STATE_MACHINE 1 #define AUTH_STATE_MACHINE 2 #define AUTH_RSP_STATE_MACHINE 3 #define SYNC_STATE_MACHINE 4 #define MLME_CNTL_STATE_MACHINE 5 #define WPA_PSK_STATE_MACHINE 6 -//#define LEAP_STATE_MACHINE 7 +/*#define LEAP_STATE_MACHINE 7 */ #define AIRONET_STATE_MACHINE 8 #define ACTION_STATE_MACHINE 9 -// AP MLME state machines +/* AP MLME state machines */ #define AP_ASSOC_STATE_MACHINE 11 #define AP_AUTH_STATE_MACHINE 12 #define AP_SYNC_STATE_MACHINE 14 @@ -611,9 +611,9 @@ #define WPA_STATE_MACHINE 23 -// -// STA's CONTROL/CONNECT state machine: states, events, total function # -// +/* */ +/* STA's CONTROL/CONNECT state machine: states, events, total function # */ +/* */ #define CNTL_IDLE 0 #define CNTL_WAIT_DISASSOC 1 #define CNTL_WAIT_JOIN 2 @@ -626,7 +626,7 @@ #define CNTL_WAIT_OID_DISASSOC 9 #ifdef RTMP_MAC_USB #define CNTL_WAIT_SCAN_FOR_CONNECT 10 -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ #define MT2_ASSOC_CONF 34 #define MT2_AUTH_CONF 35 @@ -645,9 +645,9 @@ #define CNTL_FUNC_SIZE 1 -// -// STA's ASSOC state machine: states, events, total function # -// +/* */ +/* STA's ASSOC state machine: states, events, total function # */ +/* */ #define ASSOC_IDLE 0 #define ASSOC_WAIT_RSP 1 #define REASSOC_WAIT_RSP 2 @@ -670,16 +670,16 @@ #define ASSOC_FUNC_SIZE (MAX_ASSOC_STATE * MAX_ASSOC_MSG) -// -// ACT state machine: states, events, total function # -// +/* */ +/* ACT state machine: states, events, total function # */ +/* */ #define ACT_IDLE 0 #define MAX_ACT_STATE 1 #define ACT_MACHINE_BASE 0 -//Those PEER_xx_CATE number is based on real Categary value in IEEE spec. Please don'es modify it by your self. -//Category +/*Those PEER_xx_CATE number is based on real Categary value in IEEE spec. Please don'es modify it by your self. */ +/*Category */ #define MT2_PEER_SPECTRUM_CATE 0 #define MT2_PEER_QOS_CATE 1 #define MT2_PEER_DLS_CATE 2 @@ -687,7 +687,7 @@ #define MT2_PEER_PUBLIC_CATE 4 #define MT2_PEER_RM_CATE 5 /* "FT_CATEGORY_BSS_TRANSITION equal to 6" is defined file of "dot11r_ft.h" */ -#define MT2_PEER_HT_CATE 7 // 7.4.7 +#define MT2_PEER_HT_CATE 7 /* 7.4.7 */ #define MAX_PEER_CATE_MSG 7 #define MT2_MLME_ADD_BA_CATE 8 @@ -698,7 +698,7 @@ #define MT2_ACT_INVALID 13 #define MAX_ACT_MSG 14 -//Category field +/*Category field */ #define CATEGORY_SPECTRUM 0 #define CATEGORY_QOS 1 #define CATEGORY_DLS 2 @@ -707,35 +707,35 @@ #define CATEGORY_RM 5 #define CATEGORY_HT 7 -// DLS Action frame definition +/* DLS Action frame definition */ #define ACTION_DLS_REQUEST 0 #define ACTION_DLS_RESPONSE 1 #define ACTION_DLS_TEARDOWN 2 -//Spectrum Action field value 802.11h 7.4.1 -#define SPEC_MRQ 0 // Request -#define SPEC_MRP 1 //Report +/*Spectrum Action field value 802.11h 7.4.1 */ +#define SPEC_MRQ 0 /* Request */ +#define SPEC_MRP 1 /*Report */ #define SPEC_TPCRQ 2 #define SPEC_TPCRP 3 #define SPEC_CHANNEL_SWITCH 4 -//BA Action field value +/*BA Action field value */ #define ADDBA_REQ 0 #define ADDBA_RESP 1 #define DELBA 2 -//Public's Action field value in Public Category. Some in 802.11y and some in 11n -#define ACTION_BSS_2040_COEXIST 0 // 11n -#define ACTION_DSE_ENABLEMENT 1 // 11y D9.0 -#define ACTION_DSE_DEENABLEMENT 2 // 11y D9.0 -#define ACTION_DSE_REG_LOCATION_ANNOUNCE 3 // 11y D9.0 -#define ACTION_EXT_CH_SWITCH_ANNOUNCE 4 // 11y D9.0 -#define ACTION_DSE_MEASUREMENT_REQ 5 // 11y D9.0 -#define ACTION_DSE_MEASUREMENT_REPORT 6 // 11y D9.0 -#define ACTION_MEASUREMENT_PILOT_ACTION 7 // 11y D9.0 -#define ACTION_DSE_POWER_CONSTRAINT 8 // 11y D9.0 +/*Public's Action field value in Public Category. Some in 802.11y and some in 11n */ +#define ACTION_BSS_2040_COEXIST 0 /* 11n */ +#define ACTION_DSE_ENABLEMENT 1 /* 11y D9.0 */ +#define ACTION_DSE_DEENABLEMENT 2 /* 11y D9.0 */ +#define ACTION_DSE_REG_LOCATION_ANNOUNCE 3 /* 11y D9.0 */ +#define ACTION_EXT_CH_SWITCH_ANNOUNCE 4 /* 11y D9.0 */ +#define ACTION_DSE_MEASUREMENT_REQ 5 /* 11y D9.0 */ +#define ACTION_DSE_MEASUREMENT_REPORT 6 /* 11y D9.0 */ +#define ACTION_MEASUREMENT_PILOT_ACTION 7 /* 11y D9.0 */ +#define ACTION_DSE_POWER_CONSTRAINT 8 /* 11y D9.0 */ -//HT Action field value +/*HT Action field value */ #define NOTIFY_BW_ACTION 0 #define SMPS_ACTION 1 #define PSMP_ACTION 2 @@ -747,9 +747,9 @@ #define HT_INFO_EXCHANGE 8 #define ACT_FUNC_SIZE (MAX_ACT_STATE * MAX_ACT_MSG) -// -// STA's AUTHENTICATION state machine: states, evvents, total function # -// +/* */ +/* STA's AUTHENTICATION state machine: states, evvents, total function # */ +/* */ #define AUTH_REQ_IDLE 0 #define AUTH_WAIT_SEQ2 1 #define AUTH_WAIT_SEQ4 2 @@ -763,9 +763,9 @@ #define AUTH_FUNC_SIZE (MAX_AUTH_STATE * MAX_AUTH_MSG) -// -// STA's AUTH_RSP state machine: states, events, total function # -// +/* */ +/* STA's AUTH_RSP state machine: states, events, total function # */ +/* */ #define AUTH_RSP_IDLE 0 #define AUTH_RSP_WAIT_CHAL 1 #define MAX_AUTH_RSP_STATE 2 @@ -778,10 +778,10 @@ #define AUTH_RSP_FUNC_SIZE (MAX_AUTH_RSP_STATE * MAX_AUTH_RSP_MSG) -// -// STA's SYNC state machine: states, events, total function # -// -#define SYNC_IDLE 0 // merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state +/* */ +/* STA's SYNC state machine: states, events, total function # */ +/* */ +#define SYNC_IDLE 0 /* merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state */ #define JOIN_WAIT_BEACON 1 #define SCAN_LISTEN 2 #define MAX_SYNC_STATE 3 @@ -801,7 +801,7 @@ #define SYNC_FUNC_SIZE (MAX_SYNC_STATE * MAX_SYNC_MSG) -//Messages for the DLS state machine +/*Messages for the DLS state machine */ #define DLS_IDLE 0 #define MAX_DLS_STATE 1 @@ -815,18 +815,18 @@ #define DLS_FUNC_SIZE (MAX_DLS_STATE * MAX_DLS_MSG) -// -// WSC State machine: states, events, total function # -// - -// -// AP's CONTROL/CONNECT state machine: states, events, total function # -// +/* */ +/* WSC State machine: states, events, total function # */ +/* */ + +/* */ +/* AP's CONTROL/CONNECT state machine: states, events, total function # */ +/* */ #define AP_CNTL_FUNC_SIZE 1 -// -// AP's ASSOC state machine: states, events, total function # -// +/* */ +/* AP's ASSOC state machine: states, events, total function # */ +/* */ #define AP_ASSOC_IDLE 0 #define AP_MAX_ASSOC_STATE 1 @@ -840,9 +840,9 @@ #define AP_ASSOC_FUNC_SIZE (AP_MAX_ASSOC_STATE * AP_MAX_ASSOC_MSG) -// -// AP's AUTHENTICATION state machine: states, events, total function # -// +/* */ +/* AP's AUTHENTICATION state machine: states, events, total function # */ +/* */ #define AP_AUTH_REQ_IDLE 0 #define AP_MAX_AUTH_STATE 1 @@ -856,9 +856,9 @@ #define AP_AUTH_FUNC_SIZE (AP_MAX_AUTH_STATE * AP_MAX_AUTH_MSG) -// -// AP's SYNC state machine: states, events, total function # -// +/* */ +/* AP's SYNC state machine: states, events, total function # */ +/* */ #define AP_SYNC_IDLE 0 #define AP_SCAN_LISTEN 1 #define AP_MAX_SYNC_STATE 2 @@ -874,9 +874,9 @@ #define AP_SYNC_FUNC_SIZE (AP_MAX_SYNC_STATE * AP_MAX_SYNC_MSG) -// -// Common WPA state machine: states, events, total function # -// +/* */ +/* Common WPA state machine: states, events, total function # */ +/* */ #define WPA_PTK 0 #define MAX_WPA_PTK_STATE 1 @@ -890,14 +890,14 @@ #define WPA_FUNC_SIZE (MAX_WPA_PTK_STATE * MAX_WPA_MSG) -// ============================================================================= +/* ============================================================================= */ -// value domain of 802.11 header FC.Tyte, which is b3..b2 of the 1st-byte of MAC header +/* value domain of 802.11 header FC.Tyte, which is b3..b2 of the 1st-byte of MAC header */ #define BTYPE_MGMT 0 #define BTYPE_CNTL 1 #define BTYPE_DATA 2 -// value domain of 802.11 MGMT frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header +/* value domain of 802.11 MGMT frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header */ #define SUBTYPE_ASSOC_REQ 0 #define SUBTYPE_ASSOC_RSP 1 #define SUBTYPE_REASSOC_REQ 2 @@ -912,7 +912,7 @@ #define SUBTYPE_ACTION 13 #define SUBTYPE_ACTION_NO_ACK 14 -// value domain of 802.11 CNTL frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header +/* value domain of 802.11 CNTL frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header */ #define SUBTYPE_WRAPPER 7 #define SUBTYPE_BLOCK_ACK_REQ 8 #define SUBTYPE_BLOCK_ACK 9 @@ -923,7 +923,7 @@ #define SUBTYPE_CFEND 14 #define SUBTYPE_CFEND_CFACK 15 -// value domain of 802.11 DATA frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header +/* value domain of 802.11 DATA frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header */ #define SUBTYPE_DATA 0 #define SUBTYPE_DATA_CFACK 1 #define SUBTYPE_DATA_CFPOLL 2 @@ -941,15 +941,15 @@ #define SUBTYPE_QOS_CFPOLL 14 #define SUBTYPE_QOS_CFACK_CFPOLL 15 -// ACK policy of QOS Control field bit 6:5 -#define NORMAL_ACK 0x00 // b6:5 = 00 -#define NO_ACK 0x20 // b6:5 = 01 -#define NO_EXPLICIT_ACK 0x40 // b6:5 = 10 -#define BLOCK_ACK 0x60 // b6:5 = 11 - -// -// rtmp_data.c use these definition -// +/* ACK policy of QOS Control field bit 6:5 */ +#define NORMAL_ACK 0x00 /* b6:5 = 00 */ +#define NO_ACK 0x20 /* b6:5 = 01 */ +#define NO_EXPLICIT_ACK 0x40 /* b6:5 = 10 */ +#define BLOCK_ACK 0x60 /* b6:5 = 11 */ + +/* */ +/* rtmp_data.c use these definition */ +/* */ #define LENGTH_802_11 24 #define LENGTH_802_11_AND_H 30 #define LENGTH_802_11_CRC_H 34 @@ -965,40 +965,40 @@ #define LENGTH_802_3_NO_TYPE 12 #define LENGTH_802_1Q 4 /* VLAN related */ -// STA_CSR4.field.TxResult +/* STA_CSR4.field.TxResult */ #define TX_RESULT_SUCCESS 0 #define TX_RESULT_ZERO_LENGTH 1 #define TX_RESULT_UNDER_RUN 2 #define TX_RESULT_OHY_ERROR 4 #define TX_RESULT_RETRY_FAIL 6 -// All PHY rate summary in TXD -// Preamble MODE in TxD +/* All PHY rate summary in TXD */ +/* Preamble MODE in TxD */ #define MODE_CCK 0 #define MODE_OFDM 1 #define MODE_HTMIX 2 #define MODE_HTGREENFIELD 3 -// MCS for CCK. BW.SGI.STBC are reserved -#define MCS_LONGP_RATE_1 0 // long preamble CCK 1Mbps -#define MCS_LONGP_RATE_2 1 // long preamble CCK 1Mbps +/* MCS for CCK. BW.SGI.STBC are reserved */ +#define MCS_LONGP_RATE_1 0 /* long preamble CCK 1Mbps */ +#define MCS_LONGP_RATE_2 1 /* long preamble CCK 1Mbps */ #define MCS_LONGP_RATE_5_5 2 #define MCS_LONGP_RATE_11 3 -#define MCS_SHORTP_RATE_1 4 // long preamble CCK 1Mbps. short is forbidden in 1Mbps -#define MCS_SHORTP_RATE_2 5 // short preamble CCK 2Mbps +#define MCS_SHORTP_RATE_1 4 /* long preamble CCK 1Mbps. short is forbidden in 1Mbps */ +#define MCS_SHORTP_RATE_2 5 /* short preamble CCK 2Mbps */ #define MCS_SHORTP_RATE_5_5 6 #define MCS_SHORTP_RATE_11 7 -// To send duplicate legacy OFDM. set BW=BW_40. SGI.STBC are reserved -#define MCS_RATE_6 0 // legacy OFDM -#define MCS_RATE_9 1 // OFDM -#define MCS_RATE_12 2 // OFDM -#define MCS_RATE_18 3 // OFDM -#define MCS_RATE_24 4 // OFDM -#define MCS_RATE_36 5 // OFDM -#define MCS_RATE_48 6 // OFDM -#define MCS_RATE_54 7 // OFDM -// HT -#define MCS_0 0 // 1S +/* To send duplicate legacy OFDM. set BW=BW_40. SGI.STBC are reserved */ +#define MCS_RATE_6 0 /* legacy OFDM */ +#define MCS_RATE_9 1 /* OFDM */ +#define MCS_RATE_12 2 /* OFDM */ +#define MCS_RATE_18 3 /* OFDM */ +#define MCS_RATE_24 4 /* OFDM */ +#define MCS_RATE_36 5 /* OFDM */ +#define MCS_RATE_48 6 /* OFDM */ +#define MCS_RATE_54 7 /* OFDM */ +/* HT */ +#define MCS_0 0 /* 1S */ #define MCS_1 1 #define MCS_2 2 #define MCS_3 3 @@ -1006,7 +1006,7 @@ #define MCS_5 5 #define MCS_6 6 #define MCS_7 7 -#define MCS_8 8 // 2S +#define MCS_8 8 /* 2S */ #define MCS_9 9 #define MCS_10 10 #define MCS_11 11 @@ -1014,7 +1014,7 @@ #define MCS_13 13 #define MCS_14 14 #define MCS_15 15 -#define MCS_16 16 // 3*3 +#define MCS_16 16 /* 3*3 */ #define MCS_17 17 #define MCS_18 18 #define MCS_19 19 @@ -1025,48 +1025,48 @@ #define MCS_32 32 #define MCS_AUTO 33 -// OID_HTPHYMODE -// MODE +/* OID_HTPHYMODE */ +/* MODE */ #define HTMODE_MM 0 #define HTMODE_GF 1 -// Fixed Tx MODE - HT, CCK or OFDM +/* Fixed Tx MODE - HT, CCK or OFDM */ #define FIXED_TXMODE_HT 0 #define FIXED_TXMODE_CCK 1 #define FIXED_TXMODE_OFDM 2 -// BW +/* BW */ #define BW_20 BAND_WIDTH_20 #define BW_40 BAND_WIDTH_40 #define BW_BOTH BAND_WIDTH_BOTH -#define BW_10 BAND_WIDTH_10 // 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field. +#define BW_10 BAND_WIDTH_10 /* 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field. */ -// SHORTGI -#define GI_400 GAP_INTERVAL_400 // only support in HT mode +/* SHORTGI */ +#define GI_400 GAP_INTERVAL_400 /* only support in HT mode */ #define GI_BOTH GAP_INTERVAL_BOTH #define GI_800 GAP_INTERVAL_800 -// STBC +/* STBC */ #define STBC_NONE 0 -#define STBC_USE 1 // limited use in rt2860b phy -#define RXSTBC_ONE 1 // rx support of one spatial stream -#define RXSTBC_TWO 2 // rx support of 1 and 2 spatial stream -#define RXSTBC_THR 3 // rx support of 1~3 spatial stream -// MCS FEEDBACK -#define MCSFBK_NONE 0 // not support mcs feedback / -#define MCSFBK_RSV 1 // reserved -#define MCSFBK_UNSOLICIT 2 // only support unsolict mcs feedback -#define MCSFBK_MRQ 3 // response to both MRQ and unsolict mcs feedback +#define STBC_USE 1 /* limited use in rt2860b phy */ +#define RXSTBC_ONE 1 /* rx support of one spatial stream */ +#define RXSTBC_TWO 2 /* rx support of 1 and 2 spatial stream */ +#define RXSTBC_THR 3 /* rx support of 1~3 spatial stream */ +/* MCS FEEDBACK */ +#define MCSFBK_NONE 0 /* not support mcs feedback / */ +#define MCSFBK_RSV 1 /* reserved */ +#define MCSFBK_UNSOLICIT 2 /* only support unsolict mcs feedback */ +#define MCSFBK_MRQ 3 /* response to both MRQ and unsolict mcs feedback */ -// MIMO power safe +/* MIMO power safe */ #define MMPS_STATIC 0 #define MMPS_DYNAMIC 1 #define MMPS_RSV 2 #define MMPS_ENABLE 3 -// A-MSDU size +/* A-MSDU size */ #define AMSDU_0 0 #define AMSDU_1 1 -// MCS use 7 bits +/* MCS use 7 bits */ #define TXRATEMIMO 0x80 #define TXRATEMCS 0x7F #define TXRATEOFDM 0x7F @@ -1074,77 +1074,77 @@ #define RATE_2 1 #define RATE_5_5 2 #define RATE_11 3 -#define RATE_6 4 // OFDM -#define RATE_9 5 // OFDM -#define RATE_12 6 // OFDM -#define RATE_18 7 // OFDM -#define RATE_24 8 // OFDM -#define RATE_36 9 // OFDM -#define RATE_48 10 // OFDM -#define RATE_54 11 // OFDM +#define RATE_6 4 /* OFDM */ +#define RATE_9 5 /* OFDM */ +#define RATE_12 6 /* OFDM */ +#define RATE_18 7 /* OFDM */ +#define RATE_24 8 /* OFDM */ +#define RATE_36 9 /* OFDM */ +#define RATE_48 10 /* OFDM */ +#define RATE_54 11 /* OFDM */ #define RATE_FIRST_OFDM_RATE RATE_6 #define RATE_LAST_OFDM_RATE RATE_54 -#define RATE_6_5 12 // HT mix -#define RATE_13 13 // HT mix -#define RATE_19_5 14 // HT mix -#define RATE_26 15 // HT mix -#define RATE_39 16 // HT mix -#define RATE_52 17 // HT mix -#define RATE_58_5 18 // HT mix -#define RATE_65 19 // HT mix -#define RATE_78 20 // HT mix -#define RATE_104 21 // HT mix -#define RATE_117 22 // HT mix -#define RATE_130 23 // HT mix -//#define RATE_AUTO_SWITCH 255 // for StaCfg.FixedTxRate only +#define RATE_6_5 12 /* HT mix */ +#define RATE_13 13 /* HT mix */ +#define RATE_19_5 14 /* HT mix */ +#define RATE_26 15 /* HT mix */ +#define RATE_39 16 /* HT mix */ +#define RATE_52 17 /* HT mix */ +#define RATE_58_5 18 /* HT mix */ +#define RATE_65 19 /* HT mix */ +#define RATE_78 20 /* HT mix */ +#define RATE_104 21 /* HT mix */ +#define RATE_117 22 /* HT mix */ +#define RATE_130 23 /* HT mix */ +/*#define RATE_AUTO_SWITCH 255 // for StaCfg.FixedTxRate only */ #define HTRATE_0 12 #define RATE_FIRST_MM_RATE HTRATE_0 #define RATE_FIRST_HT_RATE HTRATE_0 #define RATE_LAST_HT_RATE HTRATE_0 -// pTxWI->txop -#define IFS_HTTXOP 0 // The txop will be handles by ASIC. +/* pTxWI->txop */ +#define IFS_HTTXOP 0 /* The txop will be handles by ASIC. */ #define IFS_PIFS 1 #define IFS_SIFS 2 #define IFS_BACKOFF 3 -// pTxD->RetryMode +/* pTxD->RetryMode */ #define LONG_RETRY 1 #define SHORT_RETRY 0 -// Country Region definition +/* Country Region definition */ #define REGION_MINIMUM_BG_BAND 0 -#define REGION_0_BG_BAND 0 // 1-11 -#define REGION_1_BG_BAND 1 // 1-13 -#define REGION_2_BG_BAND 2 // 10-11 -#define REGION_3_BG_BAND 3 // 10-13 -#define REGION_4_BG_BAND 4 // 14 -#define REGION_5_BG_BAND 5 // 1-14 -#define REGION_6_BG_BAND 6 // 3-9 -#define REGION_7_BG_BAND 7 // 5-13 -#define REGION_31_BG_BAND 31 // 5-13 +#define REGION_0_BG_BAND 0 /* 1-11 */ +#define REGION_1_BG_BAND 1 /* 1-13 */ +#define REGION_2_BG_BAND 2 /* 10-11 */ +#define REGION_3_BG_BAND 3 /* 10-13 */ +#define REGION_4_BG_BAND 4 /* 14 */ +#define REGION_5_BG_BAND 5 /* 1-14 */ +#define REGION_6_BG_BAND 6 /* 3-9 */ +#define REGION_7_BG_BAND 7 /* 5-13 */ +#define REGION_31_BG_BAND 31 /* 5-13 */ #define REGION_MAXIMUM_BG_BAND 7 #define REGION_MINIMUM_A_BAND 0 -#define REGION_0_A_BAND 0 // 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 -#define REGION_1_A_BAND 1 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 -#define REGION_2_A_BAND 2 // 36, 40, 44, 48, 52, 56, 60, 64 -#define REGION_3_A_BAND 3 // 52, 56, 60, 64, 149, 153, 157, 161 -#define REGION_4_A_BAND 4 // 149, 153, 157, 161, 165 -#define REGION_5_A_BAND 5 // 149, 153, 157, 161 -#define REGION_6_A_BAND 6 // 36, 40, 44, 48 -#define REGION_7_A_BAND 7 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165, 169, 173 -#define REGION_8_A_BAND 8 // 52, 56, 60, 64 -#define REGION_9_A_BAND 9 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165 -#define REGION_10_A_BAND 10 // 36, 40, 44, 48, 149, 153, 157, 161, 165 -#define REGION_11_A_BAND 11 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161 -#define REGION_12_A_BAND 12 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 -#define REGION_13_A_BAND 13 // 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161 -#define REGION_14_A_BAND 14 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 136, 140, 149, 153, 157, 161, 165 -#define REGION_15_A_BAND 15 // 149, 153, 157, 161, 165, 169, 173 +#define REGION_0_A_BAND 0 /* 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 */ +#define REGION_1_A_BAND 1 /* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 */ +#define REGION_2_A_BAND 2 /* 36, 40, 44, 48, 52, 56, 60, 64 */ +#define REGION_3_A_BAND 3 /* 52, 56, 60, 64, 149, 153, 157, 161 */ +#define REGION_4_A_BAND 4 /* 149, 153, 157, 161, 165 */ +#define REGION_5_A_BAND 5 /* 149, 153, 157, 161 */ +#define REGION_6_A_BAND 6 /* 36, 40, 44, 48 */ +#define REGION_7_A_BAND 7 /* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165, 169, 173 */ +#define REGION_8_A_BAND 8 /* 52, 56, 60, 64 */ +#define REGION_9_A_BAND 9 /* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165 */ +#define REGION_10_A_BAND 10 /* 36, 40, 44, 48, 149, 153, 157, 161, 165 */ +#define REGION_11_A_BAND 11 /* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161 */ +#define REGION_12_A_BAND 12 /* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 */ +#define REGION_13_A_BAND 13 /* 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161 */ +#define REGION_14_A_BAND 14 /* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 136, 140, 149, 153, 157, 161, 165 */ +#define REGION_15_A_BAND 15 /* 149, 153, 157, 161, 165, 169, 173 */ #define REGION_MAXIMUM_A_BAND 15 -// pTxD->CipherAlg +/* pTxD->CipherAlg */ #define CIPHER_NONE 0 #define CIPHER_WEP64 1 #define CIPHER_WEP128 2 @@ -1152,10 +1152,10 @@ #define CIPHER_AES 4 #define CIPHER_CKIP64 5 #define CIPHER_CKIP128 6 -#define CIPHER_TKIP_NO_MIC 7 // MIC appended by driver: not a valid value in hardware key table +#define CIPHER_TKIP_NO_MIC 7 /* MIC appended by driver: not a valid value in hardware key table */ #define CIPHER_SMS4 8 -// LED Status. +/* LED Status. */ #define LED_LINK_DOWN 0 #define LED_LINK_UP 1 #define LED_RADIO_OFF 2 @@ -1165,35 +1165,35 @@ #define LED_ON_SITE_SURVEY 6 #define LED_POWER_UP 7 -// value domain of pAd->LedCntl.LedMode and E2PROM +/* value domain of pAd->LedCntl.LedMode and E2PROM */ #define LED_MODE_DEFAULT 0 #define LED_MODE_TWO_LED 1 -//#define LED_MODE_SIGNAL_STREGTH 8 // EEPROM define =8 -#define LED_MODE_SIGNAL_STREGTH 0x40 // EEPROM define = 64 +/*#define LED_MODE_SIGNAL_STREGTH 8 // EEPROM define =8 */ +#define LED_MODE_SIGNAL_STREGTH 0x40 /* EEPROM define = 64 */ -// RC4 init value, used fro WEP & TKIP +/* RC4 init value, used fro WEP & TKIP */ #define PPPINITFCS32 0xffffffff /* Initial FCS value */ -// value domain of pAd->StaCfg.PortSecured. 802.1X controlled port definition +/* value domain of pAd->StaCfg.PortSecured. 802.1X controlled port definition */ #define WPA_802_1X_PORT_SECURED 1 #define WPA_802_1X_PORT_NOT_SECURED 2 #define PAIRWISE_KEY 1 #define GROUP_KEY 2 -//definition of DRS +/*definition of DRS */ #define MAX_STEP_OF_TX_RATE_SWITCH 32 -// pre-allocated free NDIS PACKET/BUFFER poll for internal usage +/* pre-allocated free NDIS PACKET/BUFFER poll for internal usage */ #define MAX_NUM_OF_FREE_NDIS_PACKET 128 -//Block ACK +/*Block ACK */ #define MAX_TX_REORDERBUF 64 #define MAX_RX_REORDERBUF 64 #define DEFAULT_TX_TIMEOUT 30 #define DEFAULT_RX_TIMEOUT 30 -// definition of Recipient or Originator +/* definition of Recipient or Originator */ #define I_RECIPIENT TRUE #define I_ORIGINATOR FALSE @@ -1201,43 +1201,43 @@ #define DEFAULT_RF_TX_POWER 5 #define MAX_INI_BUFFER_SIZE 4096 -#define MAX_PARAM_BUFFER_SIZE (2048) // enough for ACL (18*64) - //18 : the length of Mac address acceptable format "01:02:03:04:05:06;") - //64 : MAX_NUM_OF_ACL_LIST -// definition of pAd->OpMode +#define MAX_PARAM_BUFFER_SIZE (2048) /* enough for ACL (18*64) */ + /*18 : the length of Mac address acceptable format "01:02:03:04:05:06;") */ + /*64 : MAX_NUM_OF_ACL_LIST */ +/* definition of pAd->OpMode */ #define OPMODE_STA 0 #define OPMODE_AP 1 -//#define OPMODE_L3_BRG 2 // as AP and STA at the same time +/*#define OPMODE_L3_BRG 2 // as AP and STA at the same time */ -// ========================= AP rtmp_def.h =========================== -// value domain for pAd->EventTab.Log[].Event -#define EVENT_RESET_ACCESS_POINT 0 // Log = "hh:mm:ss Restart Access Point" -#define EVENT_ASSOCIATED 1 // Log = "hh:mm:ss STA 00:01:02:03:04:05 associated" -#define EVENT_DISASSOCIATED 2 // Log = "hh:mm:ss STA 00:01:02:03:04:05 left this BSS" -#define EVENT_AGED_OUT 3 // Log = "hh:mm:ss STA 00:01:02:03:04:05 was aged-out and removed from this BSS" +/* ========================= AP rtmp_def.h =========================== */ +/* value domain for pAd->EventTab.Log[].Event */ +#define EVENT_RESET_ACCESS_POINT 0 /* Log = "hh:mm:ss Restart Access Point" */ +#define EVENT_ASSOCIATED 1 /* Log = "hh:mm:ss STA 00:01:02:03:04:05 associated" */ +#define EVENT_DISASSOCIATED 2 /* Log = "hh:mm:ss STA 00:01:02:03:04:05 left this BSS" */ +#define EVENT_AGED_OUT 3 /* Log = "hh:mm:ss STA 00:01:02:03:04:05 was aged-out and removed from this BSS" */ #define EVENT_COUNTER_M 4 #define EVENT_INVALID_PSK 5 #define EVENT_MAX_EVENT_TYPE 6 -// ==== end of AP rtmp_def.h ============ +/* ==== end of AP rtmp_def.h ============ */ -// definition RSSI Number +/* definition RSSI Number */ #define RSSI_0 0 #define RSSI_1 1 #define RSSI_2 2 -// definition of radar detection -#define RD_NORMAL_MODE 0 // Not found radar signal -#define RD_SWITCHING_MODE 1 // Found radar signal, and doing channel switch -#define RD_SILENCE_MODE 2 // After channel switch, need to be silence a while to ensure radar not found +/* definition of radar detection */ +#define RD_NORMAL_MODE 0 /* Not found radar signal */ +#define RD_SWITCHING_MODE 1 /* Found radar signal, and doing channel switch */ +#define RD_SILENCE_MODE 2 /* After channel switch, need to be silence a while to ensure radar not found */ -//Driver defined cid for mapping status and command. +/*Driver defined cid for mapping status and command. */ #define SLEEPCID 0x11 #define WAKECID 0x22 #define QUERYPOWERCID 0x33 #define OWNERMCU 0x1 #define OWNERCPU 0x0 -// MBSSID definition +/* MBSSID definition */ #define ENTRY_NOT_FOUND 0xFF /* After Linux 2.6.9, @@ -1259,15 +1259,15 @@ #define INF_APCLI_DEV_NAME "apcli" #define INF_MESH_DEV_NAME "mesh" -// WEP Key TYPE +/* WEP Key TYPE */ #define WEP_HEXADECIMAL_TYPE 0 #define WEP_ASCII_TYPE 1 -// WIRELESS EVENTS definition +/* WIRELESS EVENTS definition */ /* Max number of char in custom event, refer to wireless_tools.28/wireless.20.h */ #define IW_CUSTOM_MAX_LEN 255 /* In bytes */ -// For system event - start +/* For system event - start */ #define IW_SYS_EVENT_FLAG_START 0x0200 #define IW_ASSOC_EVENT_FLAG 0x0200 #define IW_DISASSOC_EVENT_FLAG 0x0201 @@ -1288,12 +1288,12 @@ #define IW_STA_LINKDOWN_EVENT_FLAG 0x0210 #define IW_SCAN_COMPLETED_EVENT_FLAG 0x0211 #define IW_SCAN_ENQUEUE_FAIL_EVENT_FLAG 0x0212 -// if add new system event flag, please upadte the IW_SYS_EVENT_FLAG_END +/* if add new system event flag, please upadte the IW_SYS_EVENT_FLAG_END */ #define IW_SYS_EVENT_FLAG_END 0x0212 #define IW_SYS_EVENT_TYPE_NUM (IW_SYS_EVENT_FLAG_END - IW_SYS_EVENT_FLAG_START + 1) -// For system event - end +/* For system event - end */ -// For spoof attack event - start +/* For spoof attack event - start */ #define IW_SPOOF_EVENT_FLAG_START 0x0300 #define IW_CONFLICT_SSID_EVENT_FLAG 0x0300 #define IW_SPOOF_ASSOC_RESP_EVENT_FLAG 0x0301 @@ -1305,12 +1305,12 @@ #define IW_SPOOF_DEAUTH_EVENT_FLAG 0x0307 #define IW_SPOOF_UNKNOWN_MGMT_EVENT_FLAG 0x0308 #define IW_REPLAY_ATTACK_EVENT_FLAG 0x0309 -// if add new spoof attack event flag, please upadte the IW_SPOOF_EVENT_FLAG_END +/* if add new spoof attack event flag, please upadte the IW_SPOOF_EVENT_FLAG_END */ #define IW_SPOOF_EVENT_FLAG_END 0x0309 #define IW_SPOOF_EVENT_TYPE_NUM (IW_SPOOF_EVENT_FLAG_END - IW_SPOOF_EVENT_FLAG_START + 1) -// For spoof attack event - end +/* For spoof attack event - end */ -// For flooding attack event - start +/* For flooding attack event - start */ #define IW_FLOOD_EVENT_FLAG_START 0x0400 #define IW_FLOOD_AUTH_EVENT_FLAG 0x0400 #define IW_FLOOD_ASSOC_REQ_EVENT_FLAG 0x0401 @@ -1319,18 +1319,18 @@ #define IW_FLOOD_DISASSOC_EVENT_FLAG 0x0404 #define IW_FLOOD_DEAUTH_EVENT_FLAG 0x0405 #define IW_FLOOD_EAP_REQ_EVENT_FLAG 0x0406 -// if add new flooding attack event flag, please upadte the IW_FLOOD_EVENT_FLAG_END +/* if add new flooding attack event flag, please upadte the IW_FLOOD_EVENT_FLAG_END */ #define IW_FLOOD_EVENT_FLAG_END 0x0406 #define IW_FLOOD_EVENT_TYPE_NUM (IW_FLOOD_EVENT_FLAG_END - IW_FLOOD_EVENT_FLAG_START + 1) -// For flooding attack - end +/* For flooding attack - end */ -// End - WIRELESS EVENTS definition +/* End - WIRELESS EVENTS definition */ -// definition for DLS, kathy +/* definition for DLS, kathy */ #define MAX_NUM_OF_INIT_DLS_ENTRY 1 #define MAX_NUM_OF_DLS_ENTRY MAX_NUMBER_OF_DLS_ENTRY -//Block ACK, kathy +/*Block ACK, kathy */ #define MAX_TX_REORDERBUF 64 #define MAX_RX_REORDERBUF 64 #define DEFAULT_TX_TIMEOUT 30 @@ -1342,19 +1342,19 @@ #define IW_ESSID_MAX_SIZE 32 #endif -// For AsicRadioOff/AsicRadioOn function +/* For AsicRadioOff/AsicRadioOn function */ #define DOT11POWERSAVE 0 #define GUIRADIO_OFF 1 #define RTMP_HALT 2 #define GUI_IDLE_POWER_SAVE 3 -// -- +/* -- */ -// definition for WpaSupport flag +/* definition for WpaSupport flag */ #define WPA_SUPPLICANT_DISABLE 0 #define WPA_SUPPLICANT_ENABLE 1 #define WPA_SUPPLICANT_ENABLE_WITH_WEB_UI 2 -// Endian byte swapping codes +/* Endian byte swapping codes */ #define SWAP16(x) \ ((UINT16)( \ (((UINT16)(x) & (UINT16) 0x00ffU) << 8) | \ @@ -1423,4 +1423,4 @@ do{ \ } \ }while(0) -#endif // __RTMP_DEF_H__ +#endif /* __RTMP_DEF_H__ */ Index: b/drivers/staging/rt2860/rtmp_dot11.h =================================================================== --- a/drivers/staging/rt2860/rtmp_dot11.h +++ b/drivers/staging/rt2860/rtmp_dot11.h @@ -30,46 +30,46 @@ #include "rtmp_type.h" -// 4-byte HTC field. maybe included in any frame except non-QOS data frame. The Order bit must set 1. +/* 4-byte HTC field. maybe included in any frame except non-QOS data frame. The Order bit must set 1. */ typedef struct PACKED { - UINT32 MA:1; //management action payload exist in (QoS Null+HTC) - UINT32 TRQ:1; //sounding request - UINT32 MRQ:1; //MCS feedback. Request for a MCS feedback - UINT32 MRSorASI:3; // MRQ Sequence identifier. unchanged during entire procedure. 0x000-0x110. - UINT32 MFS:3; //SET to the received value of MRS. 0x111 for unsolicited MFB. - UINT32 MFBorASC:7; //Link adaptation feedback containing recommended MCS. 0x7f for no feedback or not available - UINT32 CalPos:2; // calibration position - UINT32 CalSeq:2; //calibration sequence - UINT32 FBKReq:2; //feedback request - UINT32 CSISTEERING:2; //CSI/ STEERING - UINT32 ZLFAnnouce:1; // ZLF announcement - UINT32 rsv:5; //calibration sequence - UINT32 ACConstraint:1; //feedback request - UINT32 RDG:1; //RDG / More PPDU + UINT32 MA:1; /*management action payload exist in (QoS Null+HTC) */ + UINT32 TRQ:1; /*sounding request */ + UINT32 MRQ:1; /*MCS feedback. Request for a MCS feedback */ + UINT32 MRSorASI:3; /* MRQ Sequence identifier. unchanged during entire procedure. 0x000-0x110. */ + UINT32 MFS:3; /*SET to the received value of MRS. 0x111 for unsolicited MFB. */ + UINT32 MFBorASC:7; /*Link adaptation feedback containing recommended MCS. 0x7f for no feedback or not available */ + UINT32 CalPos:2; /* calibration position */ + UINT32 CalSeq:2; /*calibration sequence */ + UINT32 FBKReq:2; /*feedback request */ + UINT32 CSISTEERING:2; /*CSI/ STEERING */ + UINT32 ZLFAnnouce:1; /* ZLF announcement */ + UINT32 rsv:5; /*calibration sequence */ + UINT32 ACConstraint:1; /*feedback request */ + UINT32 RDG:1; /*RDG / More PPDU */ } HT_CONTROL, *PHT_CONTROL; -// 2-byte QOS CONTROL field +/* 2-byte QOS CONTROL field */ typedef struct PACKED { USHORT TID:4; USHORT EOSP:1; - USHORT AckPolicy:2; //0: normal ACK 1:No ACK 2:scheduled under MTBA/PSMP 3: BA + USHORT AckPolicy:2; /*0: normal ACK 1:No ACK 2:scheduled under MTBA/PSMP 3: BA */ USHORT AMsduPresent:1; USHORT Txop_QueueSize:8; } QOS_CONTROL, *PQOS_CONTROL; -// 2-byte Frame control field +/* 2-byte Frame control field */ typedef struct PACKED { - USHORT Ver:2; // Protocol version - USHORT Type:2; // MSDU type - USHORT SubType:4; // MSDU subtype - USHORT ToDs:1; // To DS indication - USHORT FrDs:1; // From DS indication - USHORT MoreFrag:1; // More fragment bit - USHORT Retry:1; // Retry status bit - USHORT PwrMgmt:1; // Power management bit - USHORT MoreData:1; // More data bit - USHORT Wep:1; // Wep data - USHORT Order:1; // Strict order expected + USHORT Ver:2; /* Protocol version */ + USHORT Type:2; /* MSDU type */ + USHORT SubType:4; /* MSDU subtype */ + USHORT ToDs:1; /* To DS indication */ + USHORT FrDs:1; /* From DS indication */ + USHORT MoreFrag:1; /* More fragment bit */ + USHORT Retry:1; /* Retry status bit */ + USHORT PwrMgmt:1; /* Power management bit */ + USHORT MoreData:1; /* More data bit */ + USHORT Wep:1; /* Wep data */ + USHORT Order:1; /* Strict order expected */ } FRAME_CONTROL, *PFRAME_CONTROL; typedef struct PACKED _HEADER_802_11 { @@ -97,4 +97,4 @@ typedef struct PACKED _RTS_FRAME { UCHAR Addr2[MAC_ADDR_LEN]; } RTS_FRAME, *PRTS_FRAME; -#endif // __DOT11_BASE_H__ // +#endif /* __DOT11_BASE_H__ // */ Index: b/drivers/staging/rt2860/rtmp_iface.h =================================================================== --- a/drivers/staging/rt2860/rtmp_iface.h +++ b/drivers/staging/rt2860/rtmp_iface.h @@ -39,19 +39,19 @@ #ifdef RTMP_PCI_SUPPORT #include "iface/rtmp_pci.h" -#endif // RTMP_PCI_SUPPORT // +#endif /* RTMP_PCI_SUPPORT // */ #ifdef RTMP_USB_SUPPORT #include "iface/rtmp_usb.h" -#endif // RTMP_USB_SUPPORT // +#endif /* RTMP_USB_SUPPORT // */ typedef struct _INF_PCI_CONFIG_ { - unsigned long CSRBaseAddress; // PCI MMIO Base Address, all access will use + unsigned long CSRBaseAddress; /* PCI MMIO Base Address, all access will use */ unsigned int irq_num; } INF_PCI_CONFIG; typedef struct _INF_USB_CONFIG_ { - UINT8 BulkInEpAddr; // bulk-in endpoint address - UINT8 BulkOutEpAddr[6]; // bulk-out endpoint address + UINT8 BulkInEpAddr; /* bulk-in endpoint address */ + UINT8 BulkOutEpAddr[6]; /* bulk-out endpoint address */ } INF_USB_CONFIG; typedef struct _INF_RBUS_CONFIG_ { @@ -72,4 +72,4 @@ typedef union _RTMP_INF_CONFIG_ { struct _INF_RBUS_CONFIG_ rbusConfig; } RTMP_INF_CONFIG; -#endif // __RTMP_IFACE_H__ // +#endif /* __RTMP_IFACE_H__ // */ Index: b/drivers/staging/rt2860/rtmp_mcu.h =================================================================== --- a/drivers/staging/rt2860/rtmp_mcu.h +++ b/drivers/staging/rt2860/rtmp_mcu.h @@ -46,4 +46,4 @@ INT RtmpAsicSendCommandToMcu(IN PRTMP_AD IN UCHAR Command, IN UCHAR Token, IN UCHAR Arg0, IN UCHAR Arg1); -#endif // __RTMP_MCU_H__ // +#endif /* __RTMP_MCU_H__ // */ Index: b/drivers/staging/rt2860/rtmp_os.h =================================================================== --- a/drivers/staging/rt2860/rtmp_os.h +++ b/drivers/staging/rt2860/rtmp_os.h @@ -39,7 +39,7 @@ #ifdef LINUX #include "rt_linux.h" -#endif // LINUX // +#endif /* LINUX // */ /* This data structure mainly strip some callback function defined in @@ -69,7 +69,7 @@ typedef enum _RTMP_TASK_STATUS_ { typedef struct _RTMP_OS_TASK_ { char taskName[RTMP_OS_TASK_NAME_LEN]; void *priv; - //unsigned long taskFlags; + /*unsigned long taskFlags; */ RTMP_TASK_STATUS taskStatus; #ifndef KTHREAD_SUPPORT RTMP_OS_SEM taskSema; @@ -87,4 +87,4 @@ typedef struct _RTMP_OS_TASK_ { int RtmpOSIRQRequest(IN PNET_DEV pNetDev); int RtmpOSIRQRelease(IN PNET_DEV pNetDev); -#endif // __RMTP_OS_H__ // +#endif /* __RMTP_OS_H__ // */ Index: b/drivers/staging/rt2860/rtmp_timer.h =================================================================== --- a/drivers/staging/rt2860/rtmp_timer.h +++ b/drivers/staging/rt2860/rtmp_timer.h @@ -50,29 +50,29 @@ rtmp_timer_##_func /* ----------------- Timer Related MARCO ---------------*/ -// In some os or chipset, we have a lot of timer functions and will read/write register, -// it's not allowed in Linux USB sub-system to do it ( because of sleep issue when -// submit to ctrl pipe). So we need a wrapper function to take care it. +/* In some os or chipset, we have a lot of timer functions and will read/write register, */ +/* it's not allowed in Linux USB sub-system to do it ( because of sleep issue when */ +/* submit to ctrl pipe). So we need a wrapper function to take care it. */ #ifdef RTMP_TIMER_TASK_SUPPORT typedef VOID(*RTMP_TIMER_TASK_HANDLE) (IN PVOID SystemSpecific1, IN PVOID FunctionContext, IN PVOID SystemSpecific2, IN PVOID SystemSpecific3); -#endif // RTMP_TIMER_TASK_SUPPORT // +#endif /* RTMP_TIMER_TASK_SUPPORT // */ typedef struct _RALINK_TIMER_STRUCT { - RTMP_OS_TIMER TimerObj; // Ndis Timer object - BOOLEAN Valid; // Set to True when call RTMPInitTimer - BOOLEAN State; // True if timer cancelled - BOOLEAN PeriodicType; // True if timer is periodic timer - BOOLEAN Repeat; // True if periodic timer - ULONG TimerValue; // Timer value in milliseconds - ULONG cookie; // os specific object + RTMP_OS_TIMER TimerObj; /* Ndis Timer object */ + BOOLEAN Valid; /* Set to True when call RTMPInitTimer */ + BOOLEAN State; /* True if timer cancelled */ + BOOLEAN PeriodicType; /* True if timer is periodic timer */ + BOOLEAN Repeat; /* True if periodic timer */ + ULONG TimerValue; /* Timer value in milliseconds */ + ULONG cookie; /* os specific object */ #ifdef RTMP_TIMER_TASK_SUPPORT RTMP_TIMER_TASK_HANDLE handle; void *pAd; -#endif // RTMP_TIMER_TASK_SUPPORT // +#endif /* RTMP_TIMER_TASK_SUPPORT // */ } RALINK_TIMER_STRUCT, *PRALINK_TIMER_STRUCT; #ifdef RTMP_TIMER_TASK_SUPPORT @@ -113,7 +113,7 @@ void rtmp_timer_##_func(unsigned long da if (pTimer->Repeat) \ RTMP_OS_Add_Timer(&pTimer->TimerObj, pTimer->TimerValue); \ } -#endif // RTMP_TIMER_TASK_SUPPORT // +#endif /* RTMP_TIMER_TASK_SUPPORT // */ DECLARE_TIMER_FUNCTION(MlmePeriodicExec); DECLARE_TIMER_FUNCTION(MlmeRssiReportExec); @@ -122,7 +122,7 @@ DECLARE_TIMER_FUNCTION(APSDPeriodicExec) DECLARE_TIMER_FUNCTION(AsicRfTuningExec); #ifdef RTMP_MAC_USB DECLARE_TIMER_FUNCTION(BeaconUpdateExec); -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ DECLARE_TIMER_FUNCTION(BeaconTimeout); DECLARE_TIMER_FUNCTION(ScanTimeout); @@ -138,10 +138,10 @@ DECLARE_TIMER_FUNCTION(RadioOnExec); #ifdef RTMP_MAC_USB DECLARE_TIMER_FUNCTION(RtmpUsbStaAsicForceWakeupTimeout); -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ #if defined(AP_LED) || defined(STA_LED) DECLARE_TIMER_FUNCTION(LedCtrlMain); #endif -#endif // __RTMP_TIMER_H__ // +#endif /* __RTMP_TIMER_H__ // */ Index: b/drivers/staging/rt2860/rtmp_type.h =================================================================== --- a/drivers/staging/rt2860/rtmp_type.h +++ b/drivers/staging/rt2860/rtmp_type.h @@ -41,15 +41,15 @@ #define PACKED __attribute__ ((packed)) #ifdef LINUX -// Put platform dependent declaration here -// For example, linux type definition +/* Put platform dependent declaration here */ +/* For example, linux type definition */ typedef unsigned char UINT8; typedef unsigned short UINT16; typedef unsigned int UINT32; typedef unsigned long long UINT64; typedef int INT32; typedef long long INT64; -#endif // LINUX // +#endif /* LINUX // */ typedef unsigned char *PUINT8; typedef unsigned short *PUINT16; @@ -58,7 +58,7 @@ typedef unsigned long long *PUINT64; typedef int *PINT32; typedef long long *PINT64; -// modified for fixing compile warning on Sigma 8634 platform +/* modified for fixing compile warning on Sigma 8634 platform */ typedef char STRING; typedef signed char CHAR; @@ -72,13 +72,13 @@ typedef unsigned char UCHAR; typedef unsigned short USHORT; typedef unsigned int UINT; typedef unsigned long ULONG; -#endif // LINUX // +#endif /* LINUX // */ typedef unsigned long long ULONGLONG; typedef unsigned char BOOLEAN; #ifdef LINUX typedef void VOID; -#endif // LINUX // +#endif /* LINUX // */ typedef char *PSTRING; typedef VOID *PVOID; @@ -99,9 +99,9 @@ typedef union _LARGE_INTEGER { INT64 QuadPart; } LARGE_INTEGER; -// -// Register set pair for initialzation register set definition -// +/* */ +/* Register set pair for initialzation register set definition */ +/* */ typedef struct _RTMP_REG_PAIR { ULONG Register; ULONG Value; @@ -112,9 +112,9 @@ typedef struct _REG_PAIR { UCHAR Value; } REG_PAIR, *PREG_PAIR; -// -// Register set pair for initialzation register set definition -// +/* */ +/* Register set pair for initialzation register set definition */ +/* */ typedef struct _RTMP_RF_REGS { UCHAR Channel; ULONG R1; @@ -135,4 +135,4 @@ typedef int NTSTATUS; #define STATUS_SUCCESS 0x00 #define STATUS_UNSUCCESSFUL 0x01 -#endif // __RTMP_TYPE_H__ // +#endif /* __RTMP_TYPE_H__ // */ Index: b/drivers/staging/rt2860/rtusb_io.h =================================================================== --- a/drivers/staging/rt2860/rtusb_io.h +++ b/drivers/staging/rt2860/rtusb_io.h @@ -30,54 +30,54 @@ #include "rtmp_type.h" -// New for MeetingHouse Api support -#define CMDTHREAD_VENDOR_RESET 0x0D730101 // cmd -#define CMDTHREAD_VENDOR_UNPLUG 0x0D730102 // cmd -#define CMDTHREAD_VENDOR_SWITCH_FUNCTION 0x0D730103 // cmd -#define CMDTHREAD_MULTI_WRITE_MAC 0x0D730107 // cmd -#define CMDTHREAD_MULTI_READ_MAC 0x0D730108 // cmd -#define CMDTHREAD_VENDOR_EEPROM_WRITE 0x0D73010A // cmd -#define CMDTHREAD_VENDOR_EEPROM_READ 0x0D73010B // cmd -#define CMDTHREAD_VENDOR_ENTER_TESTMODE 0x0D73010C // cmd -#define CMDTHREAD_VENDOR_EXIT_TESTMODE 0x0D73010D // cmd -#define CMDTHREAD_VENDOR_WRITE_BBP 0x0D730119 // cmd -#define CMDTHREAD_VENDOR_READ_BBP 0x0D730118 // cmd -#define CMDTHREAD_VENDOR_WRITE_RF 0x0D73011A // cmd -#define CMDTHREAD_VENDOR_FLIP_IQ 0x0D73011D // cmd -#define CMDTHREAD_RESET_BULK_OUT 0x0D730210 // cmd -#define CMDTHREAD_RESET_BULK_IN 0x0D730211 // cmd -#define CMDTHREAD_SET_PSM_BIT 0x0D730212 // cmd -#define CMDTHREAD_SET_RADIO 0x0D730214 // cmd -#define CMDTHREAD_UPDATE_TX_RATE 0x0D730216 // cmd -#define CMDTHREAD_802_11_ADD_KEY_WEP 0x0D730218 // cmd -#define CMDTHREAD_RESET_FROM_ERROR 0x0D73021A // cmd -#define CMDTHREAD_LINK_DOWN 0x0D73021B // cmd -#define CMDTHREAD_RESET_FROM_NDIS 0x0D73021C // cmd -#define CMDTHREAD_CHECK_GPIO 0x0D730215 // cmd -#define CMDTHREAD_FORCE_WAKE_UP 0x0D730222 // cmd -#define CMDTHREAD_SET_BW 0x0D730225 // cmd -#define CMDTHREAD_SET_ASIC_WCID 0x0D730226 // cmd -#define CMDTHREAD_SET_ASIC_WCID_CIPHER 0x0D730227 // cmd -#define CMDTHREAD_QKERIODIC_EXECUT 0x0D73023D // cmd -#define RT_CMD_SET_KEY_TABLE 0x0D730228 // cmd -#define RT_CMD_SET_RX_WCID_TABLE 0x0D730229 // cmd -#define CMDTHREAD_SET_CLIENT_MAC_ENTRY 0x0D73023E // cmd -#define CMDTHREAD_SET_GROUP_KEY 0x0D73023F // cmd -#define CMDTHREAD_SET_PAIRWISE_KEY 0x0D730240 // cmd - -#define CMDTHREAD_802_11_QUERY_HARDWARE_REGISTER 0x0D710105 // cmd -#define CMDTHREAD_802_11_SET_PHY_MODE 0x0D79010C // cmd -#define CMDTHREAD_802_11_SET_STA_CONFIG 0x0D790111 // cmd -#define CMDTHREAD_802_11_SET_PREAMBLE 0x0D790101 // cmd -#define CMDTHREAD_802_11_COUNTER_MEASURE 0x0D790102 // cmd -// add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet -#define CMDTHREAD_UPDATE_PROTECT 0x0D790103 // cmd -// end johnli - -//CMDTHREAD_MULTI_READ_MAC -//CMDTHREAD_MULTI_WRITE_MAC -//CMDTHREAD_VENDOR_EEPROM_READ -//CMDTHREAD_VENDOR_EEPROM_WRITE +/* New for MeetingHouse Api support */ +#define CMDTHREAD_VENDOR_RESET 0x0D730101 /* cmd */ +#define CMDTHREAD_VENDOR_UNPLUG 0x0D730102 /* cmd */ +#define CMDTHREAD_VENDOR_SWITCH_FUNCTION 0x0D730103 /* cmd */ +#define CMDTHREAD_MULTI_WRITE_MAC 0x0D730107 /* cmd */ +#define CMDTHREAD_MULTI_READ_MAC 0x0D730108 /* cmd */ +#define CMDTHREAD_VENDOR_EEPROM_WRITE 0x0D73010A /* cmd */ +#define CMDTHREAD_VENDOR_EEPROM_READ 0x0D73010B /* cmd */ +#define CMDTHREAD_VENDOR_ENTER_TESTMODE 0x0D73010C /* cmd */ +#define CMDTHREAD_VENDOR_EXIT_TESTMODE 0x0D73010D /* cmd */ +#define CMDTHREAD_VENDOR_WRITE_BBP 0x0D730119 /* cmd */ +#define CMDTHREAD_VENDOR_READ_BBP 0x0D730118 /* cmd */ +#define CMDTHREAD_VENDOR_WRITE_RF 0x0D73011A /* cmd */ +#define CMDTHREAD_VENDOR_FLIP_IQ 0x0D73011D /* cmd */ +#define CMDTHREAD_RESET_BULK_OUT 0x0D730210 /* cmd */ +#define CMDTHREAD_RESET_BULK_IN 0x0D730211 /* cmd */ +#define CMDTHREAD_SET_PSM_BIT 0x0D730212 /* cmd */ +#define CMDTHREAD_SET_RADIO 0x0D730214 /* cmd */ +#define CMDTHREAD_UPDATE_TX_RATE 0x0D730216 /* cmd */ +#define CMDTHREAD_802_11_ADD_KEY_WEP 0x0D730218 /* cmd */ +#define CMDTHREAD_RESET_FROM_ERROR 0x0D73021A /* cmd */ +#define CMDTHREAD_LINK_DOWN 0x0D73021B /* cmd */ +#define CMDTHREAD_RESET_FROM_NDIS 0x0D73021C /* cmd */ +#define CMDTHREAD_CHECK_GPIO 0x0D730215 /* cmd */ +#define CMDTHREAD_FORCE_WAKE_UP 0x0D730222 /* cmd */ +#define CMDTHREAD_SET_BW 0x0D730225 /* cmd */ +#define CMDTHREAD_SET_ASIC_WCID 0x0D730226 /* cmd */ +#define CMDTHREAD_SET_ASIC_WCID_CIPHER 0x0D730227 /* cmd */ +#define CMDTHREAD_QKERIODIC_EXECUT 0x0D73023D /* cmd */ +#define RT_CMD_SET_KEY_TABLE 0x0D730228 /* cmd */ +#define RT_CMD_SET_RX_WCID_TABLE 0x0D730229 /* cmd */ +#define CMDTHREAD_SET_CLIENT_MAC_ENTRY 0x0D73023E /* cmd */ +#define CMDTHREAD_SET_GROUP_KEY 0x0D73023F /* cmd */ +#define CMDTHREAD_SET_PAIRWISE_KEY 0x0D730240 /* cmd */ + +#define CMDTHREAD_802_11_QUERY_HARDWARE_REGISTER 0x0D710105 /* cmd */ +#define CMDTHREAD_802_11_SET_PHY_MODE 0x0D79010C /* cmd */ +#define CMDTHREAD_802_11_SET_STA_CONFIG 0x0D790111 /* cmd */ +#define CMDTHREAD_802_11_SET_PREAMBLE 0x0D790101 /* cmd */ +#define CMDTHREAD_802_11_COUNTER_MEASURE 0x0D790102 /* cmd */ +/* add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet */ +#define CMDTHREAD_UPDATE_PROTECT 0x0D790103 /* cmd */ +/* end johnli */ + +/*CMDTHREAD_MULTI_READ_MAC */ +/*CMDTHREAD_MULTI_WRITE_MAC */ +/*CMDTHREAD_VENDOR_EEPROM_READ */ +/*CMDTHREAD_VENDOR_EEPROM_WRITE */ typedef struct _CMDHandler_TLV { USHORT Offset; USHORT Length; @@ -116,7 +116,7 @@ typedef struct _CmdQ { USB Cmd to ASIC Related MACRO ******************************************************************************/ -// reset MAC of a station entry to 0xFFFFFFFFFFFF +/* reset MAC of a station entry to 0xFFFFFFFFFFFF */ #define RTMP_STA_ENTRY_MAC_RESET(pAd, Wcid) \ { RT_SET_ASIC_WCID SetAsicWcid; \ SetAsicWcid.WCID = Wcid; \ @@ -125,22 +125,22 @@ typedef struct _CmdQ { RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_SET_ASIC_WCID, \ &SetAsicWcid, sizeof(RT_SET_ASIC_WCID)); } -// add this entry into ASIC RX WCID search table +/* add this entry into ASIC RX WCID search table */ #define RTMP_STA_ENTRY_ADD(pAd, pEntry) \ RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_SET_CLIENT_MAC_ENTRY, \ pEntry, sizeof(MAC_TABLE_ENTRY)); -// add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet -// Set MAC register value according operation mode +/* add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet */ +/* Set MAC register value according operation mode */ #define RTMP_UPDATE_PROTECT(pAd) \ RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_UPDATE_PROTECT, NULL, 0); -// end johnli +/* end johnli */ -// remove Pair-wise key material from ASIC -// yet implement +/* remove Pair-wise key material from ASIC */ +/* yet implement */ #define RTMP_STA_ENTRY_KEY_DEL(pAd, BssIdx, Wcid) -// add Client security information into ASIC WCID table and IVEIV table +/* add Client security information into ASIC WCID table and IVEIV table */ #define RTMP_STA_SECURITY_INFO_ADD(pAd, apidx, KeyID, pEntry) \ { RTMP_STA_ENTRY_MAC_RESET(pAd, pEntry->Aid); \ if (pEntry->Aid >= 1) { \ @@ -160,7 +160,7 @@ typedef struct _CmdQ { RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_SET_ASIC_WCID_CIPHER, \ &SetAsicWcidAttri, sizeof(RT_SET_ASIC_WCID_ATTRI)); } } -// Insert the BA bitmap to ASIC for the Wcid entry +/* Insert the BA bitmap to ASIC for the Wcid entry */ #define RTMP_ADD_BA_SESSION_TO_ASIC(_pAd, _Aid, _TID) \ do{ \ RT_SET_ASIC_WCID SetAsicWcid; \ @@ -170,7 +170,7 @@ typedef struct _CmdQ { RTUSBEnqueueInternalCmd((_pAd), CMDTHREAD_SET_ASIC_WCID, &SetAsicWcid, sizeof(RT_SET_ASIC_WCID)); \ }while(0) -// Remove the BA bitmap from ASIC for the Wcid entry +/* Remove the BA bitmap from ASIC for the Wcid entry */ #define RTMP_DEL_BA_SESSION_FROM_ASIC(_pAd, _Wcid, _TID) \ do{ \ RT_SET_ASIC_WCID SetAsicWcid; \ @@ -180,4 +180,4 @@ typedef struct _CmdQ { RTUSBEnqueueInternalCmd((_pAd), CMDTHREAD_SET_ASIC_WCID, &SetAsicWcid, sizeof(RT_SET_ASIC_WCID)); \ }while(0) -#endif // __RTUSB_IO_H__ // +#endif /* __RTUSB_IO_H__ // */ Index: b/drivers/staging/rt2860/spectrum.h =================================================================== --- a/drivers/staging/rt2860/spectrum.h +++ b/drivers/staging/rt2860/spectrum.h @@ -186,4 +186,4 @@ VOID NotifyChSwAnnToPeerAPs(IN PRTMP_ADA VOID RguClass_BuildBcnChList(IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf, OUT PULONG pBufLen); -#endif // __SPECTRUM_H__ // +#endif /* __SPECTRUM_H__ // */ Index: b/drivers/staging/rt2860/spectrum_def.h =================================================================== --- a/drivers/staging/rt2860/spectrum_def.h +++ b/drivers/staging/rt2860/spectrum_def.h @@ -58,7 +58,7 @@ typedef struct _MEASURE_REQ_ENTRY { ULONG lastTime; BOOLEAN Valid; UINT8 DialogToken; - UINT8 MeasureDialogToken[3]; // 0:basic measure, 1: CCA measure, 2: RPI_Histogram measure. + UINT8 MeasureDialogToken[3]; /* 0:basic measure, 1: CCA measure, 2: RPI_Histogram measure. */ } MEASURE_REQ_ENTRY, *PMEASURE_REQ_ENTRY; typedef struct _MEASURE_REQ_TAB { @@ -195,4 +195,4 @@ typedef struct PACKED _QUIET_INFO { UINT16 QuietOffset; } QUIET_INFO, *PQUIET_INFO; -#endif // __SPECTRUM_DEF_H__ // +#endif /* __SPECTRUM_DEF_H__ // */ Index: b/drivers/staging/rt2860/wpa.h =================================================================== --- a/drivers/staging/rt2860/wpa.h +++ b/drivers/staging/rt2860/wpa.h @@ -38,7 +38,7 @@ #ifndef __WPA_H__ #define __WPA_H__ -// EAPOL Key descripter frame format related length +/* EAPOL Key descripter frame format related length */ #define LEN_KEY_DESC_NONCE 32 #define LEN_KEY_DESC_IV 16 #define LEN_KEY_DESC_RSC 8 @@ -46,25 +46,25 @@ #define LEN_KEY_DESC_REPLAY 8 #define LEN_KEY_DESC_MIC 16 -// The length is the EAPoL-Key frame except key data field. -// Please refer to 802.11i-2004 ,Figure 43u in p.78 +/* The length is the EAPoL-Key frame except key data field. */ +/* Please refer to 802.11i-2004 ,Figure 43u in p.78 */ #define LEN_EAPOL_KEY_MSG (sizeof(KEY_DESCRIPTER) - MAX_LEN_OF_RSNIE) -// EAP Code Type. +/* EAP Code Type. */ #define EAP_CODE_REQUEST 1 #define EAP_CODE_RESPONSE 2 #define EAP_CODE_SUCCESS 3 #define EAP_CODE_FAILURE 4 -// EAPOL frame Protocol Version +/* EAPOL frame Protocol Version */ #define EAPOL_VER 1 #define EAPOL_VER2 2 -// EAPOL-KEY Descriptor Type +/* EAPOL-KEY Descriptor Type */ #define WPA1_KEY_DESC 0xfe #define WPA2_KEY_DESC 0x02 -// Key Descriptor Version of Key Information +/* Key Descriptor Version of Key Information */ #define DESC_TYPE_TKIP 1 #define DESC_TYPE_AES 2 @@ -73,11 +73,11 @@ #define LEN_MASTER_KEY 32 -// EAPOL EK, MK +/* EAPOL EK, MK */ #define LEN_EAP_EK 16 #define LEN_EAP_MICK 16 #define LEN_EAP_KEY ((LEN_EAP_EK)+(LEN_EAP_MICK)) -// TKIP key related +/* TKIP key related */ #define LEN_PMKID 16 #define LEN_TKIP_EK 16 #define LEN_TKIP_RXMICK 8 @@ -94,13 +94,13 @@ #define LEN_PMK_NAME 16 #define LEN_NONCE 32 -// RSN IE Length definition +/* RSN IE Length definition */ #define MAX_LEN_OF_RSNIE 255 #define MIN_LEN_OF_RSNIE 8 #define KEY_LIFETIME 3600 -//EAP Packet Type +/*EAP Packet Type */ #define EAPPacket 0 #define EAPOLStart 1 #define EAPOLLogoff 2 @@ -119,28 +119,28 @@ #define PAIRWISEKEY 1 #define GROUPKEY 0 -// Retry timer counter initial value +/* Retry timer counter initial value */ #define PEER_MSG1_RETRY_TIMER_CTR 0 #define PEER_MSG3_RETRY_TIMER_CTR 10 #define GROUP_MSG1_RETRY_TIMER_CTR 20 -//#ifdef CONFIG_AP_SUPPORT -// WPA mechanism retry timer interval -#define PEER_MSG1_RETRY_EXEC_INTV 1000 // 1 sec -#define PEER_MSG3_RETRY_EXEC_INTV 3000 // 3 sec -#define GROUP_KEY_UPDATE_EXEC_INTV 1000 // 1 sec -#define PEER_GROUP_KEY_UPDATE_INIV 2000 // 2 sec +/*#ifdef CONFIG_AP_SUPPORT */ +/* WPA mechanism retry timer interval */ +#define PEER_MSG1_RETRY_EXEC_INTV 1000 /* 1 sec */ +#define PEER_MSG3_RETRY_EXEC_INTV 3000 /* 3 sec */ +#define GROUP_KEY_UPDATE_EXEC_INTV 1000 /* 1 sec */ +#define PEER_GROUP_KEY_UPDATE_INIV 2000 /* 2 sec */ -#define ENQUEUE_EAPOL_START_TIMER 200 // 200 ms +#define ENQUEUE_EAPOL_START_TIMER 200 /* 200 ms */ -// group rekey interval +/* group rekey interval */ #define TIME_REKEY 0 #define PKT_REKEY 1 #define DISABLE_REKEY 2 #define MAX_REKEY 2 #define MAX_REKEY_INTER 0x3ffffff -//#endif // CONFIG_AP_SUPPORT // +/*#endif // CONFIG_AP_SUPPORT // */ #define GROUP_SUITE 0 #define PAIRWISE_SUITE 1 @@ -194,13 +194,13 @@ #define IS_WPA_CAPABILITY(a) (((a) >= Ndis802_11AuthModeWPA) && ((a) <= Ndis802_11AuthModeWPA1PSKWPA2PSK)) -// EAPOL Key Information definition within Key descriptor format +/* EAPOL Key Information definition within Key descriptor format */ typedef struct PACKED _KEY_INFO { UCHAR KeyMic:1; UCHAR Secure:1; UCHAR Error:1; UCHAR Request:1; - UCHAR EKD_DL:1; // EKD for AP; DL for STA + UCHAR EKD_DL:1; /* EKD for AP; DL for STA */ UCHAR Rsvd:3; UCHAR KeyDescVer:3; UCHAR KeyType:1; @@ -209,7 +209,7 @@ typedef struct PACKED _KEY_INFO { UCHAR KeyAck:1; } KEY_INFO, *PKEY_INFO; -// EAPOL Key descriptor format +/* EAPOL Key descriptor format */ typedef struct PACKED _KEY_DESCRIPTER { UCHAR Type; KEY_INFO KeyInfo; @@ -231,7 +231,7 @@ typedef struct PACKED _EAPOL_PACKET { KEY_DESCRIPTER KeyDesc; } EAPOL_PACKET, *PEAPOL_PACKET; -//802.11i D10 page 83 +/*802.11i D10 page 83 */ typedef struct PACKED _GTK_ENCAP { UCHAR Kid:2; UCHAR tx:1; @@ -248,7 +248,7 @@ typedef struct PACKED _KDE_ENCAP { GTK_ENCAP GTKEncap; } KDE_ENCAP, *PKDE_ENCAP; -// For WPA1 +/* For WPA1 */ typedef struct PACKED _RSNIE { UCHAR oui[4]; USHORT version; @@ -259,7 +259,7 @@ typedef struct PACKED _RSNIE { } ucast[1]; } RSNIE, *PRSNIE; -// For WPA2 +/* For WPA2 */ typedef struct PACKED _RSNIE2 { USHORT version; UCHAR mcast[4]; @@ -269,7 +269,7 @@ typedef struct PACKED _RSNIE2 { } ucast[1]; } RSNIE2, *PRSNIE2; -// AKM Suite +/* AKM Suite */ typedef struct PACKED _RSNIE_AUTH { USHORT acount; struct PACKED { @@ -294,45 +294,45 @@ typedef struct PACKED _EAP_HDR { UCHAR Body_Len[2]; UCHAR code; UCHAR identifier; - UCHAR length[2]; // including code and identifier, followed by length-2 octets of data + UCHAR length[2]; /* including code and identifier, followed by length-2 octets of data */ } EAP_HDR, *PEAP_HDR; -// For supplicant state machine states. 802.11i Draft 4.1, p. 97 -// We simplified it +/* For supplicant state machine states. 802.11i Draft 4.1, p. 97 */ +/* We simplified it */ typedef enum _WpaState { - SS_NOTUSE, // 0 - SS_START, // 1 - SS_WAIT_MSG_3, // 2 - SS_WAIT_GROUP, // 3 - SS_FINISH, // 4 - SS_KEYUPDATE, // 5 + SS_NOTUSE, /* 0 */ + SS_START, /* 1 */ + SS_WAIT_MSG_3, /* 2 */ + SS_WAIT_GROUP, /* 3 */ + SS_FINISH, /* 4 */ + SS_KEYUPDATE, /* 5 */ } WPA_STATE; -// -// The definition of the cipher combination -// -// bit3 bit2 bit1 bit0 -// +------------+------------+ -// | WPA | WPA2 | -// +------+-----+------+-----+ -// | TKIP | AES | TKIP | AES | -// | 0 | 1 | 1 | 0 | -> 0x06 -// | 0 | 1 | 1 | 1 | -> 0x07 -// | 1 | 0 | 0 | 1 | -> 0x09 -// | 1 | 0 | 1 | 1 | -> 0x0B -// | 1 | 1 | 0 | 1 | -> 0x0D -// | 1 | 1 | 1 | 0 | -> 0x0E -// | 1 | 1 | 1 | 1 | -> 0x0F -// +------+-----+------+-----+ -// +/* */ +/* The definition of the cipher combination */ +/* */ +/* bit3 bit2 bit1 bit0 */ +/* +------------+------------+ */ +/* | WPA | WPA2 | */ +/* +------+-----+------+-----+ */ +/* | TKIP | AES | TKIP | AES | */ +/* | 0 | 1 | 1 | 0 | -> 0x06 */ +/* | 0 | 1 | 1 | 1 | -> 0x07 */ +/* | 1 | 0 | 0 | 1 | -> 0x09 */ +/* | 1 | 0 | 1 | 1 | -> 0x0B */ +/* | 1 | 1 | 0 | 1 | -> 0x0D */ +/* | 1 | 1 | 1 | 0 | -> 0x0E */ +/* | 1 | 1 | 1 | 1 | -> 0x0F */ +/* +------+-----+------+-----+ */ +/* */ typedef enum _WpaMixPairCipher { MIX_CIPHER_NOTUSE = 0x00, - WPA_NONE_WPA2_TKIPAES = 0x03, // WPA2-TKIPAES + WPA_NONE_WPA2_TKIPAES = 0x03, /* WPA2-TKIPAES */ WPA_AES_WPA2_TKIP = 0x06, WPA_AES_WPA2_TKIPAES = 0x07, WPA_TKIP_WPA2_AES = 0x09, WPA_TKIP_WPA2_TKIPAES = 0x0B, - WPA_TKIPAES_WPA2_NONE = 0x0C, // WPA-TKIPAES + WPA_TKIPAES_WPA2_NONE = 0x0C, /* WPA-TKIPAES */ WPA_TKIPAES_WPA2_AES = 0x0D, WPA_TKIPAES_WPA2_TKIP = 0x0E, WPA_TKIPAES_WPA2_TKIPAES = 0x0F, @@ -341,22 +341,22 @@ typedef enum _WpaMixPairCipher { typedef struct PACKED _RSN_IE_HEADER_STRUCT { UCHAR Eid; UCHAR Length; - USHORT Version; // Little endian format + USHORT Version; /* Little endian format */ } RSN_IE_HEADER_STRUCT, *PRSN_IE_HEADER_STRUCT; -// Cipher suite selector types +/* Cipher suite selector types */ typedef struct PACKED _CIPHER_SUITE_STRUCT { UCHAR Oui[3]; UCHAR Type; } CIPHER_SUITE_STRUCT, *PCIPHER_SUITE_STRUCT; -// Authentication and Key Management suite selector +/* Authentication and Key Management suite selector */ typedef struct PACKED _AKM_SUITE_STRUCT { UCHAR Oui[3]; UCHAR Type; } AKM_SUITE_STRUCT, *PAKM_SUITE_STRUCT; -// RSN capability +/* RSN capability */ typedef struct PACKED _RSN_CAPABILITY { USHORT Rsv:10; USHORT GTKSAReplayCnt:2;