From david-b@pacbell.net Sun Apr 2 11:38:22 2006 From: David Brownell To: Greg KH Subject: SPI: spi whitespace fixes Date: Sun, 2 Apr 2006 10:33:37 -0800 Cc: Andrew Morton Message-Id: <200604021133.38140.david-b@pacbell.net> This removes superfluous whitespace in the header. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- include/linux/spi/spi.h | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) --- gregkh-2.6.orig/include/linux/spi/spi.h +++ gregkh-2.6/include/linux/spi/spi.h @@ -36,15 +36,15 @@ extern struct bus_type spi_bus_type; * @mode: The spi mode defines how data is clocked out and in. * This may be changed by the device's driver. * @bits_per_word: Data transfers involve one or more words; word sizes - * like eight or 12 bits are common. In-memory wordsizes are + * like eight or 12 bits are common. In-memory wordsizes are * powers of two bytes (e.g. 20 bit samples use 32 bits). * This may be changed by the device's driver. * The spi_transfer.bits_per_word can override this for each transfer. * @irq: Negative, or the number passed to request_irq() to receive - * interrupts from this device. + * interrupts from this device. * @controller_state: Controller's runtime state * @controller_data: Board-specific definitions for controller, such as - * FIFO initialization parameters; from board_info.controller_data + * FIFO initialization parameters; from board_info.controller_data * * An spi_device is used to interchange data between an SPI slave * (usually a discrete chip) and CPU memory. @@ -145,13 +145,13 @@ static inline void spi_unregister_driver * struct spi_master - interface to SPI master controller * @cdev: class interface to this driver * @bus_num: board-specific (and often SOC-specific) identifier for a - * given SPI controller. + * given SPI controller. * @num_chipselect: chipselects are used to distinguish individual - * SPI slaves, and are numbered from zero to num_chipselects. - * each slave has a chipselect signal, but it's common that not - * every chipselect is connected to a slave. + * SPI slaves, and are numbered from zero to num_chipselects. + * each slave has a chipselect signal, but it's common that not + * every chipselect is connected to a slave. * @setup: updates the device mode and clocking records used by a - * device's SPI controller; protocol code may call this. + * device's SPI controller; protocol code may call this. * @transfer: adds a message to the controller's transfer queue. * @cleanup: frees controller-specific state * @@ -276,8 +276,8 @@ extern struct spi_master *spi_busnum_to_ * for this transfer. If 0 the default (from spi_device) is used. * @cs_change: affects chipselect after this transfer completes * @delay_usecs: microseconds to delay after this transfer before - * (optionally) changing the chipselect status, then starting - * the next transfer or completing this spi_message. + * (optionally) changing the chipselect status, then starting + * the next transfer or completing this spi_message. * @transfer_list: transfers are sequenced through spi_message.transfers * * SPI transfers always write the same number of bytes as they read. @@ -364,7 +364,7 @@ struct spi_transfer { * and its transfers, ignore them until its completion callback. */ struct spi_message { - struct list_head transfers; + struct list_head transfers; struct spi_device *spi; @@ -382,7 +382,7 @@ struct spi_message { */ /* completion is reported through a callback */ - void (*complete)(void *context); + void (*complete)(void *context); void *context; unsigned actual_length; int status;