From khali@linux-fr.org Tue Nov 29 13:26:51 2005 Date: Tue, 29 Nov 2005 22:27:14 +0100 From: Jean Delvare To: Greg KH Cc: Yuan Mu Subject: [PATCH] hwmon: w83792d fix unused fan pins Message-Id: <20051129222714.0b53543e.khali@linux-fr.org> Content-Disposition: inline; filename=hwmon-w83792d-fan-pins-fixes.patch 1. This patch add check for fan4,5,6,7 and do not create device file if their pins are not configured as fan. 2. Fix the issue that can not set fan divisor to 128. 3. Fix the index out of bounds bug in w83792d_detect function. Signed-off-by: Yuan Mu Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/w83792d.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) --- gregkh-2.6.orig/drivers/hwmon/w83792d.c +++ gregkh-2.6/drivers/hwmon/w83792d.c @@ -193,6 +193,7 @@ static const u8 W83792D_REG_LEVELS[3][4] 0xE2 } /* (bit3-0) SmartFanII: Fan3 Level 3 */ }; +#define W83792D_REG_GPIO_EN 0x1A #define W83792D_REG_CONFIG 0x40 #define W83792D_REG_VID_FANDIV 0x47 #define W83792D_REG_CHIPID 0x49 @@ -257,7 +258,7 @@ DIV_TO_REG(long val) { int i; val = SENSORS_LIMIT(val, 1, 128) >> 1; - for (i = 0; i < 6; i++) { + for (i = 0; i < 7; i++) { if (val == 0) break; val >>= 1; @@ -1282,8 +1283,8 @@ w83792d_detect(struct i2c_adapter *adapt w83792d_init_client(new_client); /* A few vars need to be filled upon startup */ - for (i = 1; i <= 7; i++) { - data->fan_min[i - 1] = w83792d_read_value(new_client, + for (i = 0; i < 7; i++) { + data->fan_min[i] = w83792d_read_value(new_client, W83792D_REG_FAN_MIN[i]); } @@ -1306,10 +1307,20 @@ w83792d_detect(struct i2c_adapter *adapt device_create_file_fan(new_client, 1); device_create_file_fan(new_client, 2); device_create_file_fan(new_client, 3); - device_create_file_fan(new_client, 4); - device_create_file_fan(new_client, 5); - device_create_file_fan(new_client, 6); - device_create_file_fan(new_client, 7); + + /* Read GPIO enable register to check if pins for fan 4,5 are used as + GPIO */ + val1 = w83792d_read_value(new_client, W83792D_REG_GPIO_EN); + if (!(val1 & 0x40)) + device_create_file_fan(new_client, 4); + if (!(val1 & 0x20)) + device_create_file_fan(new_client, 5); + + val1 = w83792d_read_value(new_client, W83792D_REG_PIN); + if (val1 & 0x40) + device_create_file_fan(new_client, 6); + if (val1 & 0x04) + device_create_file_fan(new_client, 7); device_create_file_temp1(new_client); /* Temp1 */ device_create_file_temp_add(new_client, 2); /* Temp2 */