From pcihpd-discuss-admin@lists.sourceforge.net Mon May 8 17:52:40 2006 Message-ID: <445F1091.5020009@jp.fujitsu.com> From: Kenji Kaneshige To: gregkh@suse.de Cc: Kenji Kaneshige , Subject: pciehp: Fix programming hotplug parameters Date: Mon, 08 May 2006 18:34:09 +0900 Current PCHEHP driver doesn't have any code to program hotplug parameters from firmware. So hotplug parameters are never programed at hot-add time. This patch add support for programming hotplug parameters to PCIEHP driver. Signed-off-by: Kenji Kaneshige Cc: Kristen Accardi Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/pciehp_pci.c | 141 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 139 insertions(+), 2 deletions(-) --- gregkh-2.6.orig/drivers/pci/hotplug/pciehp_pci.c +++ gregkh-2.6/drivers/pci/hotplug/pciehp_pci.c @@ -34,6 +34,144 @@ #include "../pci.h" #include "pciehp.h" +static void program_hpp_type0(struct pci_dev *dev, struct hpp_type0 *hpp) +{ + u16 pci_cmd, pci_bctl; + + if (hpp->revision > 1) { + printk(KERN_WARNING "%s: Rev.%d type0 record not supported\n", + __FUNCTION__, hpp->revision); + return; + } + + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpp->cache_line_size); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp->latency_timer); + pci_read_config_word(dev, PCI_COMMAND, &pci_cmd); + if (hpp->enable_serr) + pci_cmd |= PCI_COMMAND_SERR; + else + pci_cmd &= ~PCI_COMMAND_SERR; + if (hpp->enable_perr) + pci_cmd |= PCI_COMMAND_PARITY; + else + pci_cmd &= ~PCI_COMMAND_PARITY; + pci_write_config_word(dev, PCI_COMMAND, pci_cmd); + + /* Program bridge control value */ + if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { + pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, + hpp->latency_timer); + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl); + if (hpp->enable_serr) + pci_bctl |= PCI_BRIDGE_CTL_SERR; + else + pci_bctl &= ~PCI_BRIDGE_CTL_SERR; + if (hpp->enable_perr) + pci_bctl |= PCI_BRIDGE_CTL_PARITY; + else + pci_bctl &= ~PCI_BRIDGE_CTL_PARITY; + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl); + } +} + +static void program_hpp_type2(struct pci_dev *dev, struct hpp_type2 *hpp) +{ + int pos; + u16 reg16; + u32 reg32; + + if (hpp->revision > 1) { + printk(KERN_WARNING "%s: Rev.%d type2 record not supported\n", + __FUNCTION__, hpp->revision); + return; + } + + /* Find PCI Express capability */ + pos = pci_find_capability(dev, PCI_CAP_ID_EXP); + if (!pos) + return; + + /* Initialize Device Control Register */ + pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, ®16); + reg16 = (reg16 & hpp->pci_exp_devctl_and) | hpp->pci_exp_devctl_or; + pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, reg16); + + /* Initialize Link Control Register */ + if (dev->subordinate) { + pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, ®16); + reg16 = (reg16 & hpp->pci_exp_lnkctl_and) + | hpp->pci_exp_lnkctl_or; + pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, reg16); + } + + /* Find Advanced Error Reporting Enhanced Capability */ + pos = 256; + do { + pci_read_config_dword(dev, pos, ®32); + if (PCI_EXT_CAP_ID(reg32) == PCI_EXT_CAP_ID_ERR) + break; + } while ((pos = PCI_EXT_CAP_NEXT(reg32))); + if (!pos) + return; + + /* Initialize Uncorrectable Error Mask Register */ + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, ®32); + reg32 = (reg32 & hpp->unc_err_mask_and) | hpp->unc_err_mask_or; + pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, reg32); + + /* Initialize Uncorrectable Error Severity Register */ + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, ®32); + reg32 = (reg32 & hpp->unc_err_sever_and) | hpp->unc_err_sever_or; + pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, reg32); + + /* Initialize Correctable Error Mask Register */ + pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, ®32); + reg32 = (reg32 & hpp->cor_err_mask_and) | hpp->cor_err_mask_or; + pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg32); + + /* Initialize Advanced Error Capabilities and Control Register */ + pci_read_config_dword(dev, pos + PCI_ERR_CAP, ®32); + reg32 = (reg32 & hpp->adv_err_cap_and) | hpp->adv_err_cap_or; + pci_write_config_dword(dev, pos + PCI_ERR_CAP, reg32); + + /* + * FIXME: The following two registers are not supported yet. + * + * o Secondary Uncorrectable Error Severity Register + * o Secondary Uncorrectable Error Mask Register + */ +} + +static void program_fw_provided_values(struct pci_dev *dev) +{ + struct pci_dev *cdev; + struct hotplug_params hpp; + + /* Program hpp values for this device */ + if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL || + (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE && + (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI))) + return; + + if (pciehp_get_hp_params_from_firmware(dev, &hpp)) { + printk(KERN_WARNING "%s: Could not get hotplug parameters\n", + __FUNCTION__); + return; + } + + if (hpp.t2) + program_hpp_type2(dev, hpp.t2); + if (hpp.t0) + program_hpp_type0(dev, hpp.t0); + + /* Program child devices */ + if (dev->subordinate) { + list_for_each_entry(cdev, &dev->subordinate->devices, + bus_list) + program_fw_provided_values(cdev); + } +} + static int pciehp_add_bridge(struct pci_dev *dev) { struct pci_bus *parent = dev->bus; @@ -92,8 +230,7 @@ int pciehp_configure_device(struct slot (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) { pciehp_add_bridge(dev); } - /* TBD: program firmware provided _HPP values */ - /* program_fw_provided_values(dev); */ + program_fw_provided_values(dev); } pci_bus_assign_resources(parent);