From e23b01ba87875e179d09f7c6eabfce7a7bab6d92 Mon Sep 17 00:00:00 2001 From: Bernd Porr Date: Fri, 14 Nov 2008 14:49:34 -0800 Subject: Staging: comedi: add usb usbduxfast driver From: Bernd Porr ITL USB-DUXfast driver From: Bernd Porr Cc: David Schleef Cc: Frank Mori Hess Cc: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/Makefile | 1 drivers/staging/comedi/drivers/usbduxfast.c | 1779 ++++++++++++++++++++++++++++ 2 files changed, 1780 insertions(+) --- a/drivers/staging/comedi/drivers/Makefile +++ b/drivers/staging/comedi/drivers/Makefile @@ -9,3 +9,4 @@ obj-$(CONFIG_COMEDI_PCI_DRIVERS) += mite # Comedi USB drivers obj-$(CONFIG_COMEDI_USB_DRIVERS) += usbdux.o +obj-$(CONFIG_COMEDI_USB_DRIVERS) += usbduxfast.o --- /dev/null +++ b/drivers/staging/comedi/drivers/usbduxfast.c @@ -0,0 +1,1779 @@ +#define DRIVER_VERSION "v0.99a" +#define DRIVER_AUTHOR "Bernd Porr, BerndPorr@f2s.com" +#define DRIVER_DESC "USB-DUXfast, BerndPorr@f2s.com" +/* + comedi/drivers/usbduxfast.c + Copyright (C) 2004 Bernd Porr, Bernd.Porr@f2s.com + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* +Driver: usbduxfast +Description: ITL USB-DUXfast +Devices: [ITL] USB-DUX (usbduxfast.o) +Author: Bernd Porr +Updated: 04 Dec 2006 +Status: testing +*/ + +/* + * I must give credit here to Chris Baugher who + * wrote the driver for AT-MIO-16d. I used some parts of this + * driver. I also must give credits to David Brownell + * who supported me with the USB development. + * + * Bernd Porr + * + * + * Revision history: + * 0.9: Dropping the first data packet which seems to be from the last transfer. + * Buffer overflows in the FX2 are handed over to comedi. + * 0.92: Dropping now 4 packets. The quad buffer has to be emptied. + * Added insn command basically for testing. Sample rate is 1MHz/16ch=62.5kHz + * 0.99: Ian Abbott pointed out a bug which has been corrected. Thanks! + * 0.99a: added external trigger. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "comedi_fc.h" +#include "../comedidev.h" +#include "../usb.h" + +// (un)comment this if you want to have debug info. +//#define CONFIG_COMEDI_DEBUG +#undef CONFIG_COMEDI_DEBUG + +#define BOARDNAME "usbduxfast" + +// timeout for the USB-transfer +#define EZTIMEOUT 30 + +// constants for "firmware" upload and download +#define USBDUXFASTSUB_FIRMWARE 0xA0 +#define VENDOR_DIR_IN 0xC0 +#define VENDOR_DIR_OUT 0x40 + +// internal adresses of the 8051 processor +#define USBDUXFASTSUB_CPUCS 0xE600 + +// max lenghth of the transfer-buffer for software upload +#define TB_LEN 0x2000 + +// Input endpoint number +#define BULKINEP 6 + +// Endpoint for the A/D channellist: bulk OUT +#define CHANNELLISTEP 4 + +// Number of channels +#define NUMCHANNELS 32 + +// size of the waveform descriptor +#define WAVESIZE 0x20 + +// Size of one A/D value +#define SIZEADIN ((sizeof(int16_t))) + +// Size of the input-buffer IN BYTES +#define SIZEINBUF 512 + +// 16 bytes. +#define SIZEINSNBUF 512 + +// Size of the buffer for the dux commands +#define SIZEOFDUXBUFFER 256 // bytes + +// Number of in-URBs which receive the data: min=5 +#define NUMOFINBUFFERSHIGH 10 + +// Total number of usbduxfast devices +#define NUMUSBDUXFAST 16 + +// Number of subdevices +#define N_SUBDEVICES 1 + +// Analogue in subdevice +#define SUBDEV_AD 0 + +// min delay steps for more than one channel +// basically when the mux gives up. ;-) +#define MIN_SAMPLING_PERIOD 9 // steps at 30MHz in the FX2 + +// Max number of 1/30MHz delay steps: +#define MAX_SAMPLING_PERIOD 500 + +// Number of received packets to ignore before we start handing data over to comedi. +// It's quad buffering and we have to ignore 4 packets. +#define PACKETS_TO_IGNORE 4 + +///////////////////////////////////////////// +// comedi constants +static const comedi_lrange range_usbduxfast_ai_range = { 2, { + BIP_RANGE(0.75), + BIP_RANGE(0.5), + } +}; + +/* + * private structure of one subdevice + */ + +// This is the structure which holds all the data of this driver +// one sub device just now: A/D +typedef struct { + // attached? + int attached; + // is it associated with a subdevice? + int probed; + // pointer to the usb-device + struct usb_device *usbdev; + // BULK-transfer handling: urb + struct urb *urbIn; + int8_t *transfer_buffer; + // input buffer for single insn + int16_t *insnBuffer; + // interface number + int ifnum; +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) + // interface structure in 2.6 + struct usb_interface *interface; +#endif + // comedi device for the interrupt context + comedi_device *comedidev; + // asynchronous command is running + short int ai_cmd_running; + // continous aquisition + short int ai_continous; + // number of samples to aquire + long int ai_sample_count; + // commands + uint8_t *dux_commands; + // counter which ignores the first buffers + int ignore; + struct semaphore sem; +} usbduxfastsub_t; + +// The pointer to the private usb-data of the driver +// is also the private data for the comedi-device. +// This has to be global as the usb subsystem needs +// global variables. The other reason is that this +// structure must be there _before_ any comedi +// command is issued. The usb subsystem must be +// initialised before comedi can access it. +static usbduxfastsub_t usbduxfastsub[NUMUSBDUXFAST]; + +static DECLARE_MUTEX(start_stop_sem); + +// bulk transfers to usbduxfast + +#define SENDADCOMMANDS 0 +#define SENDINITEP6 1 + +static int send_dux_commands(usbduxfastsub_t * this_usbduxfastsub, int cmd_type) +{ + int result, nsent; + this_usbduxfastsub->dux_commands[0] = cmd_type; +#ifdef CONFIG_COMEDI_DEBUG + int i; + printk("comedi%d: usbduxfast: dux_commands: ", + this_usbduxfastsub->comedidev->minor); + for (i = 0; i < SIZEOFDUXBUFFER; i++) { + printk(" %02x", this_usbduxfastsub->dux_commands[i]); + } + printk("\n"); +#endif + result = USB_BULK_MSG(this_usbduxfastsub->usbdev, + usb_sndbulkpipe(this_usbduxfastsub->usbdev, + CHANNELLISTEP), + this_usbduxfastsub->dux_commands, + SIZEOFDUXBUFFER, &nsent, 10000); + if (result < 0) { + printk("comedi%d: could not transmit dux_commands to the usb-device, err=%d\n", this_usbduxfastsub->comedidev->minor, result); + } + return result; +} + +// Stops the data acquision +// It should be safe to call this function from any context +static int usbduxfastsub_unlink_InURBs(usbduxfastsub_t * usbduxfastsub_tmp) +{ + int j = 0; + int err = 0; + + if (usbduxfastsub_tmp && usbduxfastsub_tmp->urbIn) { + usbduxfastsub_tmp->ai_cmd_running = 0; +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,8) + j = usb_unlink_urb(usbduxfastsub_tmp->urbIn); + if (j < 0) { + err = j; + } +#else + // waits until a running transfer is over + usb_kill_urb(usbduxfastsub_tmp->urbIn); + j = 0; +#endif + } +#ifdef CONFIG_COMEDI_DEBUG + printk("comedi: usbduxfast: unlinked InURB: res=%d\n", j); +#endif + return err; +} + +/* This will stop a running acquisition operation */ +// Is called from within this driver from both the +// interrupt context and from comedi +static int usbduxfast_ai_stop(usbduxfastsub_t * this_usbduxfastsub, + int do_unlink) +{ + int ret = 0; + + if (!this_usbduxfastsub) { + printk("comedi?: usbduxfast_ai_stop: this_usbduxfastsub=NULL!\n"); + return -EFAULT; + } +#ifdef CONFIG_COMEDI_DEBUG + printk("comedi: usbduxfast_ai_stop\n"); +#endif + + this_usbduxfastsub->ai_cmd_running = 0; + + if (do_unlink) { + // stop aquistion + ret = usbduxfastsub_unlink_InURBs(this_usbduxfastsub); + } + + return ret; +} + +// This will cancel a running acquisition operation. +// This is called by comedi but never from inside the +// driver. +static int usbduxfast_ai_cancel(comedi_device * dev, comedi_subdevice * s) +{ + usbduxfastsub_t *this_usbduxfastsub; + int res = 0; + + // force unlink of all urbs +#ifdef CONFIG_COMEDI_DEBUG + printk("comedi: usbduxfast_ai_cancel\n"); +#endif + this_usbduxfastsub = dev->private; + if (!this_usbduxfastsub) { + printk("comedi: usbduxfast_ai_cancel: this_usbduxfastsub=NULL\n"); + return -EFAULT; + } + down(&this_usbduxfastsub->sem); + if (!(this_usbduxfastsub->probed)) { + up(&this_usbduxfastsub->sem); + return -ENODEV; + } + // unlink + res = usbduxfast_ai_stop(this_usbduxfastsub, 1); + up(&this_usbduxfastsub->sem); + + return res; +} + +// analogue IN +// interrupt service routine +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) +static void usbduxfastsub_ai_Irq(struct urb *urb) +#else +static void usbduxfastsub_ai_Irq(struct urb *urb PT_REGS_ARG) +#endif +{ + int n, err; + usbduxfastsub_t *this_usbduxfastsub; + comedi_device *this_comedidev; + comedi_subdevice *s; + uint16_t *p; + + // sanity checks + // is the urb there? + if (!urb) { + printk("comedi_: usbduxfast_: ao int-handler called with urb=NULL!\n"); + return; + } + // the context variable points to the subdevice + this_comedidev = urb->context; + if (!this_comedidev) { + printk("comedi_: usbduxfast_: urb context is a NULL pointer!\n"); + return; + } + // the private structure of the subdevice is usbduxfastsub_t + this_usbduxfastsub = this_comedidev->private; + if (!this_usbduxfastsub) { + printk("comedi_: usbduxfast_: private of comedi subdev is a NULL pointer!\n"); + return; + } + // are we running a command? + if (unlikely(!(this_usbduxfastsub->ai_cmd_running))) { + // not running a command + // do not continue execution if no asynchronous command is running + // in particular not resubmit + return; + } + + if (unlikely(!(this_usbduxfastsub->attached))) { + // no comedi device there + return; + } + // subdevice which is the AD converter + s = this_comedidev->subdevices + SUBDEV_AD; + + // first we test if something unusual has just happened + switch (urb->status) { + case 0: + break; + + // happens after an unlink command or when the device is plugged out + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + case -ECONNABORTED: + // tell this comedi + s->async->events |= COMEDI_CB_EOA; + s->async->events |= COMEDI_CB_ERROR; + comedi_event(this_usbduxfastsub->comedidev, s); + // stop the transfer w/o unlink + usbduxfast_ai_stop(this_usbduxfastsub, 0); + return; + + default: + printk("comedi%d: usbduxfast: non-zero urb status received in ai intr context: %d\n", this_usbduxfastsub->comedidev->minor, urb->status); + s->async->events |= COMEDI_CB_EOA; + s->async->events |= COMEDI_CB_ERROR; + comedi_event(this_usbduxfastsub->comedidev, s); + usbduxfast_ai_stop(this_usbduxfastsub, 0); + return; + } + + p = urb->transfer_buffer; + if (!this_usbduxfastsub->ignore) { + if (!(this_usbduxfastsub->ai_continous)) { + // not continous, fixed number of samples + n = urb->actual_length / sizeof(uint16_t); + if (unlikely(this_usbduxfastsub->ai_sample_count < n)) { + // we have send only a fraction of the bytes received + cfc_write_array_to_buffer(s, + urb->transfer_buffer, + this_usbduxfastsub->ai_sample_count * + sizeof(uint16_t)); + usbduxfast_ai_stop(this_usbduxfastsub, 0); + // say comedi that the acquistion is over + s->async->events |= COMEDI_CB_EOA; + comedi_event(this_usbduxfastsub->comedidev, s); + return; + } + this_usbduxfastsub->ai_sample_count -= n; + } + // write the full buffer to comedi + cfc_write_array_to_buffer(s, + urb->transfer_buffer, urb->actual_length); + + // tell comedi that data is there + comedi_event(this_usbduxfastsub->comedidev, s); + + } else { + // ignore this packet + this_usbduxfastsub->ignore--; + } + + // command is still running + // resubmit urb for BULK transfer + urb->dev = this_usbduxfastsub->usbdev; + urb->status = 0; + if ((err = USB_SUBMIT_URB(urb)) < 0) { + printk("comedi%d: usbduxfast: urb resubm failed: %d", + this_usbduxfastsub->comedidev->minor, err); + s->async->events |= COMEDI_CB_EOA; + s->async->events |= COMEDI_CB_ERROR; + comedi_event(this_usbduxfastsub->comedidev, s); + usbduxfast_ai_stop(this_usbduxfastsub, 0); + } +} + +static int usbduxfastsub_start(usbduxfastsub_t * usbduxfastsub) +{ + int errcode = 0; + unsigned char local_transfer_buffer[16]; + + if (usbduxfastsub->probed) { + // 7f92 to zero + local_transfer_buffer[0] = 0; + errcode = USB_CONTROL_MSG(usbduxfastsub->usbdev, + // create a pipe for a control transfer + usb_sndctrlpipe(usbduxfastsub->usbdev, 0), + // bRequest, "Firmware" + USBDUXFASTSUB_FIRMWARE, + // bmRequestType + VENDOR_DIR_OUT, + // Value + USBDUXFASTSUB_CPUCS, + // Index + 0x0000, + // address of the transfer buffer + local_transfer_buffer, + // Length + 1, + // Timeout + EZTIMEOUT); + if (errcode < 0) { + printk("comedi_: usbduxfast_: control msg failed (start)\n"); + return errcode; + } + } + return 0; +} + +static int usbduxfastsub_stop(usbduxfastsub_t * usbduxfastsub) +{ + int errcode = 0; + + unsigned char local_transfer_buffer[16]; + if (usbduxfastsub->probed) { + // 7f92 to one + local_transfer_buffer[0] = 1; + errcode = USB_CONTROL_MSG + (usbduxfastsub->usbdev, + usb_sndctrlpipe(usbduxfastsub->usbdev, 0), + // bRequest, "Firmware" + USBDUXFASTSUB_FIRMWARE, + // bmRequestType + VENDOR_DIR_OUT, + // Value + USBDUXFASTSUB_CPUCS, + // Index + 0x0000, local_transfer_buffer, + // Length + 1, + // Timeout + EZTIMEOUT); + if (errcode < 0) { + printk("comedi_: usbduxfast: control msg failed (stop)\n"); + return errcode; + } + } + return 0; +} + +static int usbduxfastsub_upload(usbduxfastsub_t * usbduxfastsub, + unsigned char *local_transfer_buffer, + unsigned int startAddr, unsigned int len) +{ + int errcode; + + if (usbduxfastsub->probed) { +#ifdef CONFIG_COMEDI_DEBUG + printk("comedi%d: usbduxfast: uploading %d bytes", + usbduxfastsub->comedidev->minor, len); + printk(" to addr %d, first byte=%d.\n", + startAddr, local_transfer_buffer[0]); +#endif + errcode = USB_CONTROL_MSG + (usbduxfastsub->usbdev, + usb_sndctrlpipe(usbduxfastsub->usbdev, 0), + // brequest, firmware + USBDUXFASTSUB_FIRMWARE, + // bmRequestType + VENDOR_DIR_OUT, + // value + startAddr, + // index + 0x0000, + // our local safe buffer + local_transfer_buffer, + // length + len, + // timeout + EZTIMEOUT); +#ifdef CONFIG_COMEDI_DEBUG + printk("comedi_: usbduxfast: result=%d\n", errcode); +#endif + if (errcode < 0) { + printk("comedi_: usbduxfast: uppload failed\n"); + return errcode; + } + } else { + // no device on the bus for this index + return -EFAULT; + } + return 0; +} + +int firmwareUpload(usbduxfastsub_t * usbduxfastsub, + unsigned char *firmwareBinary, int sizeFirmware) +{ + int ret; + + if (!firmwareBinary) { + return 0; + } + ret = usbduxfastsub_stop(usbduxfastsub); + if (ret < 0) { + printk("comedi_: usbduxfast: can not stop firmware\n"); + return ret; + } + ret = usbduxfastsub_upload(usbduxfastsub, + firmwareBinary, 0, sizeFirmware); + if (ret < 0) { + printk("comedi_: usbduxfast: firmware upload failed\n"); + return ret; + } + ret = usbduxfastsub_start(usbduxfastsub); + if (ret < 0) { + printk("comedi_: usbduxfast: can not start firmware\n"); + return ret; + } + return 0; +} + +int usbduxfastsub_submit_InURBs(usbduxfastsub_t * usbduxfastsub) +{ + int errFlag; + + if (!usbduxfastsub) { + return -EFAULT; + } + usb_fill_bulk_urb(usbduxfastsub->urbIn, + usbduxfastsub->usbdev, + usb_rcvbulkpipe(usbduxfastsub->usbdev, BULKINEP), + usbduxfastsub->transfer_buffer, + SIZEINBUF, usbduxfastsub_ai_Irq, usbduxfastsub->comedidev); + +#ifdef CONFIG_COMEDI_DEBUG + printk("comedi%d: usbduxfast: submitting in-urb: %x,%x\n", + usbduxfastsub->comedidev->minor, + (int)(usbduxfastsub->urbIn->context), + (int)(usbduxfastsub->urbIn->dev)); +#endif + errFlag = USB_SUBMIT_URB(usbduxfastsub->urbIn); + if (errFlag) { + printk("comedi_: usbduxfast: ai: "); + printk("USB_SUBMIT_URB"); + printk(" error %d\n", errFlag); + return errFlag; + } + return 0; +} + +static int usbduxfast_ai_cmdtest(comedi_device * dev, + comedi_subdevice * s, comedi_cmd * cmd) +{ + int err = 0, stop_mask = 0; + long int steps, tmp = 0; + int minSamplPer; + usbduxfastsub_t *this_usbduxfastsub = dev->private; + if (!(this_usbduxfastsub->probed)) { + return -ENODEV; + } +#ifdef CONFIG_COMEDI_DEBUG + printk("comedi%d: usbduxfast_ai_cmdtest\n", dev->minor); + printk("comedi%d: usbduxfast: convert_arg=%u scan_begin_arg=%u\n", + dev->minor, cmd->convert_arg, cmd->scan_begin_arg); +#endif + /* step 1: make sure trigger sources are trivially valid */ + + tmp = cmd->start_src; + cmd->start_src &= TRIG_NOW | TRIG_EXT | TRIG_INT; + if (!cmd->start_src || tmp != cmd->start_src) + err++; + + tmp = cmd->scan_begin_src; + cmd->scan_begin_src &= TRIG_TIMER | TRIG_FOLLOW | TRIG_EXT; + if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src) + err++; + + tmp = cmd->convert_src; + cmd->convert_src &= TRIG_TIMER | TRIG_EXT; + if (!cmd->convert_src || tmp != cmd->convert_src) + err++; + + tmp = cmd->scan_end_src; + cmd->scan_end_src &= TRIG_COUNT; + if (!cmd->scan_end_src || tmp != cmd->scan_end_src) + err++; + + tmp = cmd->stop_src; + stop_mask = TRIG_COUNT | TRIG_NONE; + cmd->stop_src &= stop_mask; + if (!cmd->stop_src || tmp != cmd->stop_src) + err++; + + if (err) + return 1; + + /* step 2: make sure trigger sources are unique and mutually compatible */ + + if (cmd->start_src != TRIG_NOW && + cmd->start_src != TRIG_EXT && cmd->start_src != TRIG_INT) + err++; + if (cmd->scan_begin_src != TRIG_TIMER && + cmd->scan_begin_src != TRIG_FOLLOW && + cmd->scan_begin_src != TRIG_EXT) + err++; + if (cmd->convert_src != TRIG_TIMER && cmd->convert_src != TRIG_EXT) + err++; + if (cmd->stop_src != TRIG_COUNT && + cmd->stop_src != TRIG_EXT && cmd->stop_src != TRIG_NONE) + err++; + + // can't have external stop and start triggers at once + if (cmd->start_src == TRIG_EXT && cmd->stop_src == TRIG_EXT) + err++; + + if (err) + return 2; + + /* step 3: make sure arguments are trivially compatible */ + + if (cmd->start_src == TRIG_NOW && cmd->start_arg != 0) { + cmd->start_arg = 0; + err++; + } + + if (!cmd->chanlist_len) { + err++; + } + if (cmd->scan_end_arg != cmd->chanlist_len) { + cmd->scan_end_arg = cmd->chanlist_len; + err++; + } + + if (cmd->chanlist_len == 1) { + minSamplPer = 1; + } else { + minSamplPer = MIN_SAMPLING_PERIOD; + } + + if (cmd->convert_src == TRIG_TIMER) { + steps = cmd->convert_arg * 30; + if (steps < (minSamplPer * 1000)) { + steps = minSamplPer * 1000; + } + if (steps > (MAX_SAMPLING_PERIOD * 1000)) { + steps = MAX_SAMPLING_PERIOD * 1000; + } + // calc arg again + tmp = steps / 30; + if (cmd->convert_arg != tmp) { + cmd->convert_arg = tmp; + err++; + } + } + + if (cmd->scan_begin_src == TRIG_TIMER) { + err++; + } + // stop source + switch (cmd->stop_src) { + case TRIG_COUNT: + if (!cmd->stop_arg) { + cmd->stop_arg = 1; + err++; + } + break; + case TRIG_NONE: + if (cmd->stop_arg != 0) { + cmd->stop_arg = 0; + err++; + } + break; + // TRIG_EXT doesn't care since it doesn't trigger off a numbered channel + default: + break; + } + + if (err) + return 3; + + /* step 4: fix up any arguments */ + + return 0; + +} + +static int usbduxfast_ai_inttrig(comedi_device * dev, + comedi_subdevice * s, unsigned int trignum) +{ + int ret; + usbduxfastsub_t *this_usbduxfastsub = dev->private; + if (!this_usbduxfastsub) { + return -EFAULT; + } + down(&this_usbduxfastsub->sem); + if (!(this_usbduxfastsub->probed)) { + up(&this_usbduxfastsub->sem); + return -ENODEV; + } +#ifdef CONFIG_COMEDI_DEBUG + printk("comedi%d: usbduxfast_ai_inttrig\n", dev->minor); +#endif + + if (trignum != 0) { + printk("comedi%d: usbduxfast_ai_inttrig: invalid trignum\n", + dev->minor); + up(&this_usbduxfastsub->sem); + return -EINVAL; + } + if (!(this_usbduxfastsub->ai_cmd_running)) { + this_usbduxfastsub->ai_cmd_running = 1; + ret = usbduxfastsub_submit_InURBs(this_usbduxfastsub); + if (ret < 0) { + printk("comedi%d: usbduxfast_ai_inttrig: urbSubmit: err=%d\n", dev->minor, ret); + this_usbduxfastsub->ai_cmd_running = 0; + up(&this_usbduxfastsub->sem); + return ret; + } + s->async->inttrig = NULL; + } else { + printk("comedi%d: ai_inttrig but acqu is already running\n", + dev->minor); + } + up(&this_usbduxfastsub->sem); + return 1; +} + +// offsets for the GPIF bytes +// the first byte is the command byte +#define LENBASE 1+0x00 +#define OPBASE 1+0x08 +#define OUTBASE 1+0x10 +#define LOGBASE 1+0x18 + +static int usbduxfast_ai_cmd(comedi_device * dev, comedi_subdevice * s) +{ + comedi_cmd *cmd = &s->async->cmd; + unsigned int chan, gain, rngmask = 0xff; + int i, j, ret; + usbduxfastsub_t *this_usbduxfastsub = dev->private; + int result; + long steps, steps_tmp; + +#ifdef CONFIG_COMEDI_DEBUG + printk("comedi%d: usbduxfast_ai_cmd\n", dev->minor); +#endif + if (!this_usbduxfastsub) { + return -EFAULT; + } + down(&this_usbduxfastsub->sem); + if (!(this_usbduxfastsub->probed)) { + up(&this_usbduxfastsub->sem); + return -ENODEV; + } + if (this_usbduxfastsub->ai_cmd_running) { + printk("comedi%d: ai_cmd not possible. Another ai_cmd is running.\n", dev->minor); + up(&this_usbduxfastsub->sem); + return -EBUSY; + } + // set current channel of the running aquisition to zero + s->async->cur_chan = 0; + + // ignore the first buffers from the device if there is an error condition + this_usbduxfastsub->ignore = PACKETS_TO_IGNORE; + + if (cmd->chanlist_len > 0) { + gain = CR_RANGE(cmd->chanlist[0]); + for (i = 0; i < cmd->chanlist_len; ++i) { + chan = CR_CHAN(cmd->chanlist[i]); + if (chan != i) { + printk("comedi%d: cmd is accepting only consecutive channels.\n", dev->minor); + up(&this_usbduxfastsub->sem); + return -EINVAL; + } + if ((gain != CR_RANGE(cmd->chanlist[i])) + && (cmd->chanlist_len > 3)) { + printk("comedi%d: the gain must be the same for all channels.\n", dev->minor); + up(&this_usbduxfastsub->sem); + return -EINVAL; + } + if (i >= NUMCHANNELS) { + printk("comedi%d: channel list too long\n", + dev->minor); + break; + } + } + } + steps = 0; + if (cmd->scan_begin_src == TRIG_TIMER) { + printk("comedi%d: usbduxfast: scan_begin_src==TRIG_TIMER not valid.\n", dev->minor); + up(&this_usbduxfastsub->sem); + return -EINVAL; + } + if (cmd->convert_src == TRIG_TIMER) { + steps = (cmd->convert_arg * 30) / 1000; + } + if ((steps < MIN_SAMPLING_PERIOD) && (cmd->chanlist_len != 1)) { + printk("comedi%d: usbduxfast: ai_cmd: steps=%ld, scan_begin_arg=%d. Not properly tested by cmdtest?\n", dev->minor, steps, cmd->scan_begin_arg); + up(&this_usbduxfastsub->sem); + return -EINVAL; + } + if (steps > MAX_SAMPLING_PERIOD) { + printk("comedi%d: usbduxfast: ai_cmd: sampling rate too low.\n", + dev->minor); + up(&this_usbduxfastsub->sem); + return -EINVAL; + } + if ((cmd->start_src == TRIG_EXT) && (cmd->chanlist_len != 1) + && (cmd->chanlist_len != 16)) { + printk("comedi%d: usbduxfast: ai_cmd: TRIG_EXT only with 1 or 16 channels possible.\n", dev->minor); + up(&this_usbduxfastsub->sem); + return -EINVAL; + } +#ifdef CONFIG_COMEDI_DEBUG + printk("comedi%d: usbduxfast: steps=%ld, convert_arg=%u, ai_timer=%u\n", + dev->minor, + steps, cmd->convert_arg, this_usbduxfastsub->ai_timer); +#endif + + switch (cmd->chanlist_len) { + // one channel + case 1: + if (CR_RANGE(cmd->chanlist[0]) > 0) + rngmask = 0xff - 0x04; + else + rngmask = 0xff; + + // for external trigger: looping in this state until the RDY0 pin + // becomes zero + if (cmd->start_src == TRIG_EXT) { // we loop here until ready has been set + this_usbduxfastsub->dux_commands[LENBASE + 0] = 0x01; // branch back to state 0 + this_usbduxfastsub->dux_commands[OPBASE + 0] = 0x01; // deceision state w/o data + this_usbduxfastsub->dux_commands[OUTBASE + 0] = + 0xFF & rngmask; + this_usbduxfastsub->dux_commands[LOGBASE + 0] = 0x00; // RDY0 = 0 + } else { // we just proceed to state 1 + this_usbduxfastsub->dux_commands[LENBASE + 0] = 1; + this_usbduxfastsub->dux_commands[OPBASE + 0] = 0; + this_usbduxfastsub->dux_commands[OUTBASE + 0] = + 0xFF & rngmask; + this_usbduxfastsub->dux_commands[LOGBASE + 0] = 0; + } + + if (steps < MIN_SAMPLING_PERIOD) { + // for fast single channel aqu without mux + if (steps <= 1) { + // we just stay here at state 1 and rexecute the same state + // this gives us 30MHz sampling rate + this_usbduxfastsub->dux_commands[LENBASE + 1] = 0x89; // branch back to state 1 + this_usbduxfastsub->dux_commands[OPBASE + 1] = 0x03; // deceision state with data + this_usbduxfastsub->dux_commands[OUTBASE + 1] = + 0xFF & rngmask; + this_usbduxfastsub->dux_commands[LOGBASE + 1] = 0xFF; // doesn't matter + } else { + // we loop through two states: data and delay: max rate is 15Mhz + this_usbduxfastsub->dux_commands[LENBASE + 1] = + steps - 1; + this_usbduxfastsub->dux_commands[OPBASE + 1] = 0x02; // data + this_usbduxfastsub->dux_commands[OUTBASE + 1] = + 0xFF & rngmask; + this_usbduxfastsub->dux_commands[LOGBASE + 1] = 0; // doesn't matter + + this_usbduxfastsub->dux_commands[LENBASE + 2] = 0x09; // branch back to state 1 + this_usbduxfastsub->dux_commands[OPBASE + 2] = 0x01; // deceision state w/o data + this_usbduxfastsub->dux_commands[OUTBASE + 2] = + 0xFF & rngmask; + this_usbduxfastsub->dux_commands[LOGBASE + 2] = 0xFF; // doesn't matter + } + } else { + // we loop through 3 states: 2x delay and 1x data. This gives a min + // sampling rate of 60kHz. + + // we have 1 state with duration 1 + steps = steps - 1; + + // do the first part of the delay + this_usbduxfastsub->dux_commands[LENBASE + 1] = + steps / 2; + this_usbduxfastsub->dux_commands[OPBASE + 1] = 0; + this_usbduxfastsub->dux_commands[OUTBASE + 1] = + 0xFF & rngmask; + this_usbduxfastsub->dux_commands[LOGBASE + 1] = 0; + + // and the second part + this_usbduxfastsub->dux_commands[LENBASE + 2] = + steps - steps / 2; + this_usbduxfastsub->dux_commands[OPBASE + 2] = 0; + this_usbduxfastsub->dux_commands[OUTBASE + 2] = + 0xFF & rngmask; + this_usbduxfastsub->dux_commands[LOGBASE + 2] = 0; + + // get the data and branch back + this_usbduxfastsub->dux_commands[LENBASE + 3] = 0x09; // branch back to state 1 + this_usbduxfastsub->dux_commands[OPBASE + 3] = 0x03; // deceision state w data + this_usbduxfastsub->dux_commands[OUTBASE + 3] = + 0xFF & rngmask; + this_usbduxfastsub->dux_commands[LOGBASE + 3] = 0xFF; // doesn't matter + } + break; + + case 2: + // two channels + // commit data to the FIFO + if (CR_RANGE(cmd->chanlist[0]) > 0) + rngmask = 0xff - 0x04; + else + rngmask = 0xff; + this_usbduxfastsub->dux_commands[LENBASE + 0] = 1; + this_usbduxfastsub->dux_commands[OPBASE + 0] = 0x02; // data + this_usbduxfastsub->dux_commands[OUTBASE + 0] = 0xFF & rngmask; + this_usbduxfastsub->dux_commands[LOGBASE + 0] = 0; + + // we have 1 state with duration 1: state 0 + steps_tmp = steps - 1; + + if (CR_RANGE(cmd->chanlist[1]) > 0) + rngmask = 0xff - 0x04; + else + rngmask = 0xff; + // do the first part of the delay + this_usbduxfastsub->dux_commands[LENBASE + 1] = steps_tmp / 2; + this_usbduxfastsub->dux_commands[OPBASE + 1] = 0; + this_usbduxfastsub->dux_commands[OUTBASE + 1] = 0xFE & rngmask; //count + this_usbduxfastsub->dux_commands[LOGBASE + 1] = 0; + + // and the second part + this_usbduxfastsub->dux_commands[LENBASE + 2] = + steps_tmp - steps_tmp / 2; + this_usbduxfastsub->dux_commands[OPBASE + 2] = 0; + this_usbduxfastsub->dux_commands[OUTBASE + 2] = 0xFF & rngmask; + this_usbduxfastsub->dux_commands[LOGBASE + 2] = 0; + + this_usbduxfastsub->dux_commands[LENBASE + 3] = 1; + this_usbduxfastsub->dux_commands[OPBASE + 3] = 0x02; // data + this_usbduxfastsub->dux_commands[OUTBASE + 3] = 0xFF & rngmask; + this_usbduxfastsub->dux_commands[LOGBASE + 3] = 0; + + // we have 2 states with duration 1: step 6 and the IDLE state + steps_tmp = steps - 2; + + if (CR_RANGE(cmd->chanlist[0]) > 0) + rngmask = 0xff - 0x04; + else + rngmask = 0xff; + // do the first part of the delay + this_usbduxfastsub->dux_commands[LENBASE + 4] = steps_tmp / 2; + this_usbduxfastsub->dux_commands[OPBASE + 4] = 0; + this_usbduxfastsub->dux_commands[OUTBASE + 4] = (0xFF - 0x02) & rngmask; //reset + this_usbduxfastsub->dux_commands[LOGBASE + 4] = 0; + + // and the second part + this_usbduxfastsub->dux_commands[LENBASE + 5] = + steps_tmp - steps_tmp / 2; + this_usbduxfastsub->dux_commands[OPBASE + 5] = 0; + this_usbduxfastsub->dux_commands[OUTBASE + 5] = 0xFF & rngmask; + this_usbduxfastsub->dux_commands[LOGBASE + 5] = 0; + + this_usbduxfastsub->dux_commands[LENBASE + 6] = 1; + this_usbduxfastsub->dux_commands[OPBASE + 6] = 0; + this_usbduxfastsub->dux_commands[OUTBASE + 6] = 0xFF & rngmask; + this_usbduxfastsub->dux_commands[LOGBASE + 6] = 0; + break; + + case 3: + // three channels + for (j = 0; j < 1; j++) { + if (CR_RANGE(cmd->chanlist[j]) > 0) + rngmask = 0xff - 0x04; + else + rngmask = 0xff; + // commit data to the FIFO and do the first part of the delay + this_usbduxfastsub->dux_commands[LENBASE + j * 2] = + steps / 2; + this_usbduxfastsub->dux_commands[OPBASE + j * 2] = 0x02; // data + this_usbduxfastsub->dux_commands[OUTBASE + j * 2] = 0xFF & rngmask; // no change + this_usbduxfastsub->dux_commands[LOGBASE + j * 2] = 0; + + if (CR_RANGE(cmd->chanlist[j + 1]) > 0) + rngmask = 0xff - 0x04; + else + rngmask = 0xff; + // do the second part of the delay + this_usbduxfastsub->dux_commands[LENBASE + j * 2 + 1] = + steps - steps / 2; + this_usbduxfastsub->dux_commands[OPBASE + j * 2 + 1] = 0; // no data + this_usbduxfastsub->dux_commands[OUTBASE + j * 2 + 1] = 0xFE & rngmask; //count + this_usbduxfastsub->dux_commands[LOGBASE + j * 2 + 1] = + 0; + } + + // 2 steps with duration 1: the idele step and step 6: + steps_tmp = steps - 2; + // commit data to the FIFO and do the first part of the delay + this_usbduxfastsub->dux_commands[LENBASE + 4] = steps_tmp / 2; + this_usbduxfastsub->dux_commands[OPBASE + 4] = 0x02; // data + this_usbduxfastsub->dux_commands[OUTBASE + 4] = 0xFF & rngmask; // no change + this_usbduxfastsub->dux_commands[LOGBASE + 4] = 0; + + if (CR_RANGE(cmd->chanlist[0]) > 0) + rngmask = 0xff - 0x04; + else + rngmask = 0xff; + // do the second part of the delay + this_usbduxfastsub->dux_commands[LENBASE + 5] = + steps_tmp - steps_tmp / 2; + this_usbduxfastsub->dux_commands[OPBASE + 5] = 0; // no data + this_usbduxfastsub->dux_commands[OUTBASE + 5] = (0xFF - 0x02) & rngmask; // reset + this_usbduxfastsub->dux_commands[LOGBASE + 5] = 0; + + this_usbduxfastsub->dux_commands[LENBASE + 6] = 1; + this_usbduxfastsub->dux_commands[OPBASE + 6] = 0; + this_usbduxfastsub->dux_commands[OUTBASE + 6] = 0xFF & rngmask; + this_usbduxfastsub->dux_commands[LOGBASE + 6] = 0; + + case 16: + if (CR_RANGE(cmd->chanlist[0]) > 0) + rngmask = 0xff - 0x04; + else + rngmask = 0xff; + if (cmd->start_src == TRIG_EXT) { // we loop here until ready has been set + this_usbduxfastsub->dux_commands[LENBASE + 0] = 0x01; // branch back to state 0 + this_usbduxfastsub->dux_commands[OPBASE + 0] = 0x01; // deceision state w/o data + this_usbduxfastsub->dux_commands[OUTBASE + 0] = (0xFF - 0x02) & rngmask; // reset + this_usbduxfastsub->dux_commands[LOGBASE + 0] = 0x00; // RDY0 = 0 + } else { // we just proceed to state 1 + this_usbduxfastsub->dux_commands[LENBASE + 0] = 255; // 30us reset pulse + this_usbduxfastsub->dux_commands[OPBASE + 0] = 0; + this_usbduxfastsub->dux_commands[OUTBASE + 0] = (0xFF - 0x02) & rngmask; // reset + this_usbduxfastsub->dux_commands[LOGBASE + 0] = 0; + } + + // commit data to the FIFO + this_usbduxfastsub->dux_commands[LENBASE + 1] = 1; + this_usbduxfastsub->dux_commands[OPBASE + 1] = 0x02; // data + this_usbduxfastsub->dux_commands[OUTBASE + 1] = 0xFF & rngmask; + this_usbduxfastsub->dux_commands[LOGBASE + 1] = 0; + + // we have 2 states with duration 1 + steps = steps - 2; + + // do the first part of the delay + this_usbduxfastsub->dux_commands[LENBASE + 2] = steps / 2; + this_usbduxfastsub->dux_commands[OPBASE + 2] = 0; + this_usbduxfastsub->dux_commands[OUTBASE + 2] = 0xFE & rngmask; + this_usbduxfastsub->dux_commands[LOGBASE + 2] = 0; + + // and the second part + this_usbduxfastsub->dux_commands[LENBASE + 3] = + steps - steps / 2; + this_usbduxfastsub->dux_commands[OPBASE + 3] = 0; + this_usbduxfastsub->dux_commands[OUTBASE + 3] = 0xFF & rngmask; + this_usbduxfastsub->dux_commands[LOGBASE + 3] = 0; + + this_usbduxfastsub->dux_commands[LENBASE + 4] = 0x09; // branch back to state 1 + this_usbduxfastsub->dux_commands[OPBASE + 4] = 0x01; // deceision state w/o data + this_usbduxfastsub->dux_commands[OUTBASE + 4] = 0xFF & rngmask; + this_usbduxfastsub->dux_commands[LOGBASE + 4] = 0xFF; // doesn't matter + + break; + + default: + printk("comedi %d: unsupported combination of channels\n", + dev->minor); + up(&this_usbduxfastsub->sem); + return -EFAULT; + } + +#ifdef CONFIG_COMEDI_DEBUG + printk("comedi %d: sending commands to the usb device\n", dev->minor); +#endif + // 0 means that the AD commands are sent + result = send_dux_commands(this_usbduxfastsub, SENDADCOMMANDS); + if (result < 0) { + printk("comedi%d: adc command could not be submitted. Aborting...\n", dev->minor); + up(&this_usbduxfastsub->sem); + return result; + } + if (cmd->stop_src == TRIG_COUNT) { + this_usbduxfastsub->ai_sample_count = + (cmd->stop_arg) * (cmd->scan_end_arg); + if (usbduxfastsub->ai_sample_count < 1) { + printk("comedi%d: (cmd->stop_arg)*(cmd->scan_end_arg)<1, aborting.\n", dev->minor); + up(&this_usbduxfastsub->sem); + return -EFAULT; + } + this_usbduxfastsub->ai_continous = 0; + } else { + // continous aquisition + this_usbduxfastsub->ai_continous = 1; + this_usbduxfastsub->ai_sample_count = 0; + } + + if ((cmd->start_src == TRIG_NOW) || (cmd->start_src == TRIG_EXT)) { + // enable this acquisition operation + this_usbduxfastsub->ai_cmd_running = 1; + ret = usbduxfastsub_submit_InURBs(this_usbduxfastsub); + if (ret < 0) { + this_usbduxfastsub->ai_cmd_running = 0; + // fixme: unlink here?? + up(&this_usbduxfastsub->sem); + return ret; + } + s->async->inttrig = NULL; + } else { + /* TRIG_INT */ + // don't enable the acquision operation + // wait for an internal signal + s->async->inttrig = usbduxfast_ai_inttrig; + } + up(&this_usbduxfastsub->sem); + + return 0; +} + +/* Mode 0 is used to get a single conversion on demand */ +static int usbduxfast_ai_insn_read(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + int i, j, n, actual_length; + int chan, range, rngmask; + int err; + usbduxfastsub_t *usbduxfastsub = dev->private; + + if (!usbduxfastsub) { + printk("comedi%d: ai_insn_read: no usb dev.\n", dev->minor); + return -ENODEV; + } +#ifdef CONFIG_COMEDI_DEBUG + printk("comedi%d: ai_insn_read, insn->n=%d, insn->subdev=%d\n", + dev->minor, insn->n, insn->subdev); +#endif + down(&usbduxfastsub->sem); + if (!(usbduxfastsub->probed)) { + up(&usbduxfastsub->sem); + return -ENODEV; + } + if (usbduxfastsub->ai_cmd_running) { + printk("comedi%d: ai_insn_read not possible. Async Command is running.\n", dev->minor); + up(&usbduxfastsub->sem); + return -EBUSY; + } + // sample one channel + chan = CR_CHAN(insn->chanspec); + range = CR_RANGE(insn->chanspec); + // set command for the first channel + + if (range > 0) + rngmask = 0xff - 0x04; + else + rngmask = 0xff; + // commit data to the FIFO + usbduxfastsub->dux_commands[LENBASE + 0] = 1; + usbduxfastsub->dux_commands[OPBASE + 0] = 0x02; // data + usbduxfastsub->dux_commands[OUTBASE + 0] = 0xFF & rngmask; + usbduxfastsub->dux_commands[LOGBASE + 0] = 0; + + // do the first part of the delay + usbduxfastsub->dux_commands[LENBASE + 1] = 12; + usbduxfastsub->dux_commands[OPBASE + 1] = 0; + usbduxfastsub->dux_commands[OUTBASE + 1] = 0xFE & rngmask; + usbduxfastsub->dux_commands[LOGBASE + 1] = 0; + + usbduxfastsub->dux_commands[LENBASE + 2] = 1; + usbduxfastsub->dux_commands[OPBASE + 2] = 0; + usbduxfastsub->dux_commands[OUTBASE + 2] = 0xFE & rngmask; + usbduxfastsub->dux_commands[LOGBASE + 2] = 0; + + usbduxfastsub->dux_commands[LENBASE + 3] = 1; + usbduxfastsub->dux_commands[OPBASE + 3] = 0; + usbduxfastsub->dux_commands[OUTBASE + 3] = 0xFE & rngmask; + usbduxfastsub->dux_commands[LOGBASE + 3] = 0; + + usbduxfastsub->dux_commands[LENBASE + 4] = 1; + usbduxfastsub->dux_commands[OPBASE + 4] = 0; + usbduxfastsub->dux_commands[OUTBASE + 4] = 0xFE & rngmask; + usbduxfastsub->dux_commands[LOGBASE + 4] = 0; + + // second part + usbduxfastsub->dux_commands[LENBASE + 5] = 12; + usbduxfastsub->dux_commands[OPBASE + 5] = 0; + usbduxfastsub->dux_commands[OUTBASE + 5] = 0xFF & rngmask; + usbduxfastsub->dux_commands[LOGBASE + 5] = 0; + + usbduxfastsub->dux_commands[LENBASE + 6] = 1; + usbduxfastsub->dux_commands[OPBASE + 6] = 0; + usbduxfastsub->dux_commands[OUTBASE + 6] = 0xFF & rngmask; + usbduxfastsub->dux_commands[LOGBASE + 0] = 0; + +#ifdef CONFIG_COMEDI_DEBUG + printk("comedi %d: sending commands to the usb device\n", dev->minor); +#endif + // 0 means that the AD commands are sent + err = send_dux_commands(usbduxfastsub, SENDADCOMMANDS); + if (err < 0) { + printk("comedi%d: adc command could not be submitted. Aborting...\n", dev->minor); + up(&usbduxfastsub->sem); + return err; + } +#ifdef CONFIG_COMEDI_DEBUG + printk("comedi%d: usbduxfast: submitting in-urb: %x,%x\n", + usbduxfastsub->comedidev->minor, + (int)(usbduxfastsub->urbIn->context), + (int)(usbduxfastsub->urbIn->dev)); +#endif + for (i = 0; i < PACKETS_TO_IGNORE; i++) { + err = USB_BULK_MSG(usbduxfastsub->usbdev, + usb_rcvbulkpipe(usbduxfastsub->usbdev, BULKINEP), + usbduxfastsub->transfer_buffer, + SIZEINBUF, &actual_length, 10000); + if (err < 0) { + printk("comedi%d: insn timeout. No data.\n", + dev->minor); + up(&usbduxfastsub->sem); + return err; + } + } + // data points + for (i = 0; i < insn->n;) { + err = USB_BULK_MSG(usbduxfastsub->usbdev, + usb_rcvbulkpipe(usbduxfastsub->usbdev, BULKINEP), + usbduxfastsub->transfer_buffer, + SIZEINBUF, &actual_length, 10000); + if (err < 0) { + printk("comedi%d: insn data error: %d\n", + dev->minor, err); + up(&usbduxfastsub->sem); + return err; + } + n = actual_length / sizeof(uint16_t); + if ((n % 16) != 0) { + printk("comedi%d: insn data packet corrupted.\n", + dev->minor); + up(&usbduxfastsub->sem); + return -EINVAL; + } + for (j = chan; (j < n) && (i < insn->n); j = j + 16) { + data[i] = + ((uint16_t *) (usbduxfastsub-> + transfer_buffer))[j]; + i++; + } + } + up(&usbduxfastsub->sem); + return i; +} + +static unsigned hex2unsigned(char *h) +{ + unsigned hi, lo; + if (h[0] > '9') { + hi = h[0] - 'A' + 0x0a; + } else { + hi = h[0] - '0'; + } + if (h[1] > '9') { + lo = h[1] - 'A' + 0x0a; + } else { + lo = h[1] - '0'; + } + return hi * 0x10 + lo; +} + +// for FX2 +#define FIRMWARE_MAX_LEN 0x2000 + +// taken from David Brownell's fxload and adjusted for this driver +static int read_firmware(usbduxfastsub_t * usbduxfastsub, void *firmwarePtr, + long size) +{ + int i = 0; + unsigned char *fp = (char *)firmwarePtr; + unsigned char *firmwareBinary = NULL; + int res = 0; + int maxAddr = 0; + + firmwareBinary = kmalloc(FIRMWARE_MAX_LEN, GFP_KERNEL); + if (!firmwareBinary) { + printk("comedi_: usbduxfast: mem alloc for firmware failed\n"); + return -ENOMEM; + } + + for (;;) { + char buf[256], *cp; + char type; + int len; + int idx, off; + int j = 0; + + // get one line + while ((i < size) && (fp[i] != 13) && (fp[i] != 10)) { + buf[j] = fp[i]; + i++; + j++; + if (j >= sizeof(buf)) { + printk("comedi_: usbduxfast: bogus firmware file!\n"); + return -1; + } + } + // get rid of LF/CR/... + while ((i < size) && ((fp[i] == 13) || (fp[i] == 10) + || (fp[i] == 0))) { + i++; + } + + buf[j] = 0; + //printk("comedi_: buf=%s\n",buf); + + /* EXTENSION: "# comment-till-end-of-line", for copyrights etc */ + if (buf[0] == '#') + continue; + + if (buf[0] != ':') { + printk("comedi_: usbduxfast: upload: not an ihex record: %s", buf); + return -EFAULT; + } + + /* Read the length field (up to 16 bytes) */ + len = hex2unsigned(buf + 1); + + /* Read the target offset */ + off = (hex2unsigned(buf + 3) * 0x0100) + hex2unsigned(buf + 5); + + if ((off + len) > maxAddr) { + maxAddr = off + len; + } + + if (maxAddr >= FIRMWARE_MAX_LEN) { + printk("comedi_: usbduxfast: firmware upload goes beyond FX2 RAM boundaries."); + return -EFAULT; + } + //printk("comedi_: usbduxfast: off=%x, len=%x:",off,len); + + /* Read the record type */ + type = hex2unsigned(buf + 7); + + /* If this is an EOF record, then make it so. */ + if (type == 1) { + break; + } + + if (type != 0) { + printk("comedi_: usbduxfast: unsupported record type: %u\n", type); + return -EFAULT; + } + + for (idx = 0, cp = buf + 9; idx < len; idx += 1, cp += 2) { + firmwareBinary[idx + off] = hex2unsigned(cp); + //printk("%02x ",firmwareBinary[idx+off]); + } + //printk("\n"); + + if (i >= size) { + printk("comedi_: usbduxfast: unexpected end of hex file\n"); + break; + } + + } + res = firmwareUpload(usbduxfastsub, firmwareBinary, maxAddr + 1); + kfree(firmwareBinary); + return res; +} + +static void tidy_up(usbduxfastsub_t * usbduxfastsub_tmp) +{ +#ifdef CONFIG_COMEDI_DEBUG + printk("comedi_: usbduxfast: tiding up\n"); +#endif + if (!usbduxfastsub_tmp) { + return; + } +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) + // shows the usb subsystem that the driver is down + if (usbduxfastsub_tmp->interface) { + usb_set_intfdata(usbduxfastsub_tmp->interface, NULL); + } +#endif + + usbduxfastsub_tmp->probed = 0; + + if (usbduxfastsub_tmp->urbIn) { +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,8) + // waits until a running transfer is over + // thus, under 2.4 hotplugging while a command + // is running is not safe + usb_kill_urb(usbduxfastsub_tmp->urbIn); +#endif + if (usbduxfastsub_tmp->transfer_buffer) { + kfree(usbduxfastsub_tmp->transfer_buffer); + usbduxfastsub_tmp->transfer_buffer = NULL; + } + usb_free_urb(usbduxfastsub_tmp->urbIn); + usbduxfastsub_tmp->urbIn = NULL; + } + if (usbduxfastsub_tmp->insnBuffer) { + kfree(usbduxfastsub_tmp->insnBuffer); + usbduxfastsub_tmp->insnBuffer = NULL; + } + if (usbduxfastsub_tmp->dux_commands) { + kfree(usbduxfastsub_tmp->dux_commands); + usbduxfastsub_tmp->dux_commands = NULL; + } + usbduxfastsub_tmp->ai_cmd_running = 0; +} + +// allocate memory for the urbs and initialise them +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) +static void *usbduxfastsub_probe(struct usb_device *udev, + unsigned int interfnum, const struct usb_device_id *id) +{ +#else +static int usbduxfastsub_probe(struct usb_interface *uinterf, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(uinterf); +#endif + int i; + int index; + + if (udev->speed != USB_SPEED_HIGH) { + printk("comedi_: usbduxfast_: This driver needs USB 2.0 to operate. Aborting...\n"); + return PROBE_ERR_RETURN(-ENODEV); + } +#ifdef CONFIG_COMEDI_DEBUG + printk("comedi_: usbduxfast_: finding a free structure for the usb-device\n"); +#endif + down(&start_stop_sem); + // look for a free place in the usbduxfast array + index = -1; + for (i = 0; i < NUMUSBDUXFAST; i++) { + if (!(usbduxfastsub[i].probed)) { + index = i; + break; + } + } + + // no more space + if (index == -1) { + printk("Too many usbduxfast-devices connected.\n"); + up(&start_stop_sem); + return PROBE_ERR_RETURN(-EMFILE); + } +#ifdef CONFIG_COMEDI_DEBUG + printk("comedi_: usbduxfast: usbduxfastsub[%d] is ready to connect to comedi.\n", index); +#endif + + init_MUTEX(&(usbduxfastsub[index].sem)); + // save a pointer to the usb device + usbduxfastsub[index].usbdev = udev; + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) + // save the interface number + usbduxfastsub[index].ifnum = interfnum; +#else + // 2.6: save the interface itself + usbduxfastsub[index].interface = uinterf; + // get the interface number from the interface + usbduxfastsub[index].ifnum = uinterf->altsetting->desc.bInterfaceNumber; + // hand the private data over to the usb subsystem + // will be needed for disconnect + usb_set_intfdata(uinterf, &(usbduxfastsub[index])); +#endif + +#ifdef CONFIG_COMEDI_DEBUG + printk("comedi_: usbduxfast: ifnum=%d\n", usbduxfastsub[index].ifnum); +#endif + // create space for the commands going to the usb device + usbduxfastsub[index].dux_commands = kmalloc(SIZEOFDUXBUFFER, + GFP_KERNEL); + if (!usbduxfastsub[index].dux_commands) { + printk("comedi_: usbduxfast: error alloc space for dac commands\n"); + tidy_up(&(usbduxfastsub[index])); + up(&start_stop_sem); + return PROBE_ERR_RETURN(-ENOMEM); + } + // create space of the instruction buffer + usbduxfastsub[index].insnBuffer = kmalloc(SIZEINSNBUF, GFP_KERNEL); + if (!(usbduxfastsub[index].insnBuffer)) { + printk("comedi_: usbduxfast: could not alloc space for insnBuffer\n"); + tidy_up(&(usbduxfastsub[index])); + up(&start_stop_sem); + return PROBE_ERR_RETURN(-ENOMEM); + } + // setting to alternate setting 1: enabling bulk ep + i = usb_set_interface(usbduxfastsub[index].usbdev, + usbduxfastsub[index].ifnum, 1); + if (i < 0) { + printk("comedi_: usbduxfast%d: could not switch to alternate setting 1.\n", index); + tidy_up(&(usbduxfastsub[index])); + up(&start_stop_sem); + return PROBE_ERR_RETURN(-ENODEV); + } + usbduxfastsub[index].urbIn = USB_ALLOC_URB(0); + if (usbduxfastsub[index].urbIn == NULL) { + printk("comedi_: usbduxfast%d: Could not alloc. urb\n", index); + tidy_up(&(usbduxfastsub[index])); + up(&start_stop_sem); + return PROBE_ERR_RETURN(-ENOMEM); + } + usbduxfastsub[index].transfer_buffer = kmalloc(SIZEINBUF, GFP_KERNEL); + if (!(usbduxfastsub[index].transfer_buffer)) { + printk("comedi_: usbduxfast%d: could not alloc. transb.\n", + index); + tidy_up(&(usbduxfastsub[index])); + up(&start_stop_sem); + return PROBE_ERR_RETURN(-ENOMEM); + } + // we've reached the bottom of the function + usbduxfastsub[index].probed = 1; + up(&start_stop_sem); + printk("comedi_: usbduxfast%d has been successfully initialized.\n", + index); +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) + return (void *)(&usbduxfastsub[index]); +#else + // success + return 0; +#endif +} + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) +static void usbduxfastsub_disconnect(struct usb_device *udev, void *ptr) +{ + usbduxfastsub_t *usbduxfastsub_tmp = (usbduxfastsub_t *) ptr; +#else +static void usbduxfastsub_disconnect(struct usb_interface *intf) +{ + usbduxfastsub_t *usbduxfastsub_tmp = usb_get_intfdata(intf); + struct usb_device *udev = interface_to_usbdev(intf); +#endif + if (!usbduxfastsub_tmp) { + printk("comedi_: usbduxfast: disconnect called with null pointer.\n"); + return; + } + if (usbduxfastsub_tmp->usbdev != udev) { + printk("comedi_: usbduxfast: BUG! called with wrong ptr!!!\n"); + return; + } + down(&start_stop_sem); + down(&usbduxfastsub_tmp->sem); + tidy_up(usbduxfastsub_tmp); + up(&usbduxfastsub_tmp->sem); + up(&start_stop_sem); +#ifdef CONFIG_COMEDI_DEBUG + printk("comedi_: usbduxfast: disconnected from the usb\n"); +#endif +} + +// is called when comedi-config is called +static int usbduxfast_attach(comedi_device * dev, comedi_devconfig * it) +{ + int ret; + int index; + int i; + comedi_subdevice *s = NULL; + dev->private = NULL; + + down(&start_stop_sem); + // find a valid device which has been detected by the probe function of the usb + index = -1; + for (i = 0; i < NUMUSBDUXFAST; i++) { + if ((usbduxfastsub[i].probed) && (!usbduxfastsub[i].attached)) { + index = i; + break; + } + } + + if (index < 0) { + printk("comedi%d: usbduxfast: error: attach failed, no usbduxfast devs connected to the usb bus.\n", dev->minor); + up(&start_stop_sem); + return -ENODEV; + } + + down(&(usbduxfastsub[index].sem)); + // pointer back to the corresponding comedi device + usbduxfastsub[index].comedidev = dev; + + // trying to upload the firmware into the chip + if (comedi_aux_data(it->options, 0) && + it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]) { + read_firmware(usbduxfastsub, + comedi_aux_data(it->options, 0), + it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]); + } + + dev->board_name = BOARDNAME; + + /* set number of subdevices */ + dev->n_subdevices = N_SUBDEVICES; + + // allocate space for the subdevices + if ((ret = alloc_subdevices(dev, N_SUBDEVICES)) < 0) { + printk("comedi%d: usbduxfast: error alloc space for subdev\n", + dev->minor); + up(&start_stop_sem); + return ret; + } + + printk("comedi%d: usbduxfast: usb-device %d is attached to comedi.\n", + dev->minor, index); + // private structure is also simply the usb-structure + dev->private = usbduxfastsub + index; + // the first subdevice is the A/D converter + s = dev->subdevices + SUBDEV_AD; + // the URBs get the comedi subdevice + // which is responsible for reading + // this is the subdevice which reads data + dev->read_subdev = s; + // the subdevice receives as private structure the + // usb-structure + s->private = NULL; + // analog input + s->type = COMEDI_SUBD_AI; + // readable and ref is to ground + s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_CMD_READ; + // 16 channels + s->n_chan = 16; + // length of the channellist + s->len_chanlist = 16; + // callback functions + s->insn_read = usbduxfast_ai_insn_read; + s->do_cmdtest = usbduxfast_ai_cmdtest; + s->do_cmd = usbduxfast_ai_cmd; + s->cancel = usbduxfast_ai_cancel; + // max value from the A/D converter (12bit+1 bit for overflow) + s->maxdata = 0x1000; + // range table to convert to physical units + s->range_table = &range_usbduxfast_ai_range; + + // finally decide that it's attached + usbduxfastsub[index].attached = 1; + + up(&(usbduxfastsub[index].sem)); + + up(&start_stop_sem); + + printk("comedi%d: successfully attached to usbduxfast.\n", dev->minor); + + return 0; +} + +static int usbduxfast_detach(comedi_device * dev) +{ + usbduxfastsub_t *usbduxfastsub_tmp; + +#ifdef CONFIG_COMEDI_DEBUG + printk("comedi%d: usbduxfast: detach usb device\n", dev->minor); +#endif + + if (!dev) { + printk("comedi?: usbduxfast: detach without dev variable...\n"); + return -EFAULT; + } + + usbduxfastsub_tmp = dev->private; + if (!usbduxfastsub_tmp) { + printk("comedi?: usbduxfast: detach without ptr to usbduxfastsub[]\n"); + return -EFAULT; + } + + down(&usbduxfastsub_tmp->sem); + down(&start_stop_sem); + // Don't allow detach to free the private structure + // It's one entry of of usbduxfastsub[] + dev->private = NULL; + usbduxfastsub_tmp->attached = 0; + usbduxfastsub_tmp->comedidev = NULL; +#ifdef CONFIG_COMEDI_DEBUG + printk("comedi%d: usbduxfast: detach: successfully removed\n", + dev->minor); +#endif + up(&start_stop_sem); + up(&usbduxfastsub_tmp->sem); + return 0; +} + +/* main driver struct */ +static comedi_driver driver_usbduxfast = { + driver_name:"usbduxfast", + module:THIS_MODULE, + attach:usbduxfast_attach, + detach:usbduxfast_detach, +}; + +static void init_usb_devices(void) +{ + int index; +#ifdef CONFIG_COMEDI_DEBUG + printk("comedi_: usbduxfast: setting all possible devs to invalid\n"); +#endif + // all devices entries are invalid to begin with + // they will become valid by the probe function + // and then finally by the attach-function + for (index = 0; index < NUMUSBDUXFAST; index++) { + memset(&(usbduxfastsub[index]), 0x00, + sizeof(usbduxfastsub[index])); + init_MUTEX(&(usbduxfastsub[index].sem)); + } +} + +// Table with the USB-devices: just now only testing IDs +static struct usb_device_id usbduxfastsub_table[] = { + // { USB_DEVICE(0x4b4, 0x8613), //testing + // }, + {USB_DEVICE(0x13d8, 0x0010) //real ID + }, + {USB_DEVICE(0x13d8, 0x0011) //real ID + }, + {} /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, usbduxfastsub_table); + +// The usbduxfastsub-driver +static struct usb_driver usbduxfastsub_driver = { +#ifdef COMEDI_HAVE_USB_DRIVER_OWNER + owner:THIS_MODULE, +#endif + name:BOARDNAME, + probe:usbduxfastsub_probe, + disconnect:usbduxfastsub_disconnect, + id_table:usbduxfastsub_table, +}; + +// Can't use the nice macro as I have also to initialise the USB +// subsystem: +// registering the usb-system _and_ the comedi-driver +static int init_usbduxfast(void) +{ + printk(KERN_INFO KBUILD_MODNAME ": " + DRIVER_VERSION ":" DRIVER_DESC "\n"); + init_usb_devices(); + usb_register(&usbduxfastsub_driver); + comedi_driver_register(&driver_usbduxfast); + return 0; +} + +// deregistering the comedi driver and the usb-subsystem +static void exit_usbduxfast(void) +{ + comedi_driver_unregister(&driver_usbduxfast); + usb_deregister(&usbduxfastsub_driver); +} + +module_init(init_usbduxfast); +module_exit(exit_usbduxfast); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL");