From foo@baz Thu Jan 29 16:57:23 PST 2009 Date: Thu, 29 Jan 2009 16:57:23 -0800 To: Greg KH From: Greg Kroah-Hartman Subject: Staging: aten2011: remove unneeded defines Lots of unused and unneeded #defines in this code, so lets remove them. Cc: Russell Lang Signed-off-by: Greg Kroah-Hartman --- drivers/staging/uc2322/aten2011.c | 269 +++++++++++--------------------------- 1 file changed, 83 insertions(+), 186 deletions(-) --- a/drivers/staging/uc2322/aten2011.c +++ b/drivers/staging/uc2322/aten2011.c @@ -22,157 +22,73 @@ #include #include #include -#include - -#define KERNEL_2_6 1 - #include +#include -#define MAX_RS232_PORTS 2 /* Max # of RS-232 ports per device */ - -#include - -#ifndef TRUE - #define TRUE (1) -#endif - -#ifndef FALSE - #define FALSE (0) -#endif - -#ifndef LOW8 - #define LOW8(val) ((unsigned char)(val & 0xff)) -#endif - -#ifndef HIGH8 - #define HIGH8(val) ((unsigned char)((val & 0xff00) >> 8)) -#endif - -#ifndef NUM_ENTRIES - #define NUM_ENTRIES(x) (sizeof(x)/sizeof((x)[0])) -#endif - -#define MAX_SERIALNUMBER_LEN 12 - -/* The following table is used to map the USBx port number to - * the device serial number (or physical USB path), */ - -#define MAX_ATENPORTS 2 -#define MAX_NAME_LEN 64 - -#define RAID_REG1 0x30 -#define RAID_REG2 0x31 - -#define ZLP_REG1 0x3A //Zero_Flag_Reg1 58 -#define ZLP_REG2 0x3B //Zero_Flag_Reg2 59 -#define ZLP_REG3 0x3C //Zero_Flag_Reg3 60 -#define ZLP_REG4 0x3D //Zero_Flag_Reg4 61 -#define ZLP_REG5 0x3E //Zero_Flag_Reg5 62 - -#define THRESHOLD_VAL_SP1_1 0x3F -#define THRESHOLD_VAL_SP1_2 0x40 -#define THRESHOLD_VAL_SP2_1 0x41 -#define THRESHOLD_VAL_SP2_2 0x42 - -#define THRESHOLD_VAL_SP3_1 0x43 -#define THRESHOLD_VAL_SP3_2 0x44 -#define THRESHOLD_VAL_SP4_1 0x45 -#define THRESHOLD_VAL_SP4_2 0x46 - - -/* For higher baud Rates use TIOCEXBAUD */ -#define TIOCEXBAUD 0x5462 - -#define BAUD_1152 0 /* 115200bps * 1 */ -#define BAUD_2304 1 /* 230400bps * 2 */ -#define BAUD_4032 2 /* 403200bps * 3.5 */ -#define BAUD_4608 3 /* 460800bps * 4 */ -#define BAUD_8064 4 /* 806400bps * 7 */ -#define BAUD_9216 5 /* 921600bps * 8 */ - -#define CHASE_TIMEOUT (5*HZ) /* 5 seconds */ -#define OPEN_TIMEOUT (5*HZ) /* 5 seconds */ -#define COMMAND_TIMEOUT (5*HZ) /* 5 seconds */ - -#ifndef SERIAL_MAGIC - #define SERIAL_MAGIC 0x6702 -#endif - -#define PORT_MAGIC 0x7301 - - -#define USB_VENDOR_ID_ATENINTL 0x0557 -#define ATENINTL_DEVICE_ID_2011 0x2011 -#define ATENINTL_DEVICE_ID_7820 0x7820 +#define ZLP_REG1 0x3A /* Zero_Flag_Reg1 58 */ +#define ZLP_REG2 0x3B /* Zero_Flag_Reg2 59 */ +#define ZLP_REG3 0x3C /* Zero_Flag_Reg3 60 */ +#define ZLP_REG4 0x3D /* Zero_Flag_Reg4 61 */ +#define ZLP_REG5 0x3E /* Zero_Flag_Reg5 62 */ /* Interrupt Rotinue Defines */ +#define SERIAL_IIR_RLS 0x06 +#define SERIAL_IIR_RDA 0x04 +#define SERIAL_IIR_CTI 0x0c +#define SERIAL_IIR_THR 0x02 +#define SERIAL_IIR_MS 0x00 + +/* Emulation of the bit mask on the LINE STATUS REGISTER. */ +#define SERIAL_LSR_DR 0x0001 +#define SERIAL_LSR_OE 0x0002 +#define SERIAL_LSR_PE 0x0004 +#define SERIAL_LSR_FE 0x0008 +#define SERIAL_LSR_BI 0x0010 +#define SERIAL_LSR_THRE 0x0020 +#define SERIAL_LSR_TEMT 0x0040 +#define SERIAL_LSR_FIFOERR 0x0080 + +/* MSR bit defines(place holders) */ +#define ATEN_MSR_DELTA_CTS 0x10 +#define ATEN_MSR_DELTA_DSR 0x20 +#define ATEN_MSR_DELTA_RI 0x40 +#define ATEN_MSR_DELTA_CD 0x80 + +/* Serial Port register Address */ +#define RECEIVE_BUFFER_REGISTER ((__u16)(0x00)) +#define TRANSMIT_HOLDING_REGISTER ((__u16)(0x00)) +#define INTERRUPT_ENABLE_REGISTER ((__u16)(0x01)) +#define INTERRUPT_IDENT_REGISTER ((__u16)(0x02)) +#define FIFO_CONTROL_REGISTER ((__u16)(0x02)) +#define LINE_CONTROL_REGISTER ((__u16)(0x03)) +#define MODEM_CONTROL_REGISTER ((__u16)(0x04)) +#define LINE_STATUS_REGISTER ((__u16)(0x05)) +#define MODEM_STATUS_REGISTER ((__u16)(0x06)) +#define SCRATCH_PAD_REGISTER ((__u16)(0x07)) +#define DIVISOR_LATCH_LSB ((__u16)(0x00)) +#define DIVISOR_LATCH_MSB ((__u16)(0x01)) + +#define SP1_REGISTER ((__u16)(0x00)) +#define CONTROL1_REGISTER ((__u16)(0x01)) +#define CLK_MULTI_REGISTER ((__u16)(0x02)) +#define CLK_START_VALUE_REGISTER ((__u16)(0x03)) +#define DCR1_REGISTER ((__u16)(0x04)) +#define GPIO_REGISTER ((__u16)(0x07)) -#define SERIAL_IIR_RLS 0x06 -#define SERIAL_IIR_RDA 0x04 -#define SERIAL_IIR_CTI 0x0c -#define SERIAL_IIR_THR 0x02 -#define SERIAL_IIR_MS 0x00 - -/* - * Emulation of the bit mask on the LINE STATUS REGISTER. - */ -#define SERIAL_LSR_DR 0x0001 -#define SERIAL_LSR_OE 0x0002 -#define SERIAL_LSR_PE 0x0004 -#define SERIAL_LSR_FE 0x0008 -#define SERIAL_LSR_BI 0x0010 -#define SERIAL_LSR_THRE 0x0020 -#define SERIAL_LSR_TEMT 0x0040 -#define SERIAL_LSR_FIFOERR 0x0080 - -//MSR bit defines(place holders) -#define ATEN_MSR_CTS 0x01 -#define ATEN_MSR_DSR 0x02 -#define ATEN_MSR_RI 0x04 -#define ATEN_MSR_CD 0x08 -#define ATEN_MSR_DELTA_CTS 0x10 -#define ATEN_MSR_DELTA_DSR 0x20 -#define ATEN_MSR_DELTA_RI 0x40 -#define ATEN_MSR_DELTA_CD 0x80 - -// Serial Port register Address -#define RECEIVE_BUFFER_REGISTER ((__u16)(0x00)) -#define TRANSMIT_HOLDING_REGISTER ((__u16)(0x00)) -#define INTERRUPT_ENABLE_REGISTER ((__u16)(0x01)) -#define INTERRUPT_IDENT_REGISTER ((__u16)(0x02)) -#define FIFO_CONTROL_REGISTER ((__u16)(0x02)) -#define LINE_CONTROL_REGISTER ((__u16)(0x03)) -#define MODEM_CONTROL_REGISTER ((__u16)(0x04)) -#define LINE_STATUS_REGISTER ((__u16)(0x05)) -#define MODEM_STATUS_REGISTER ((__u16)(0x06)) -#define SCRATCH_PAD_REGISTER ((__u16)(0x07)) -#define DIVISOR_LATCH_LSB ((__u16)(0x00)) -#define DIVISOR_LATCH_MSB ((__u16)(0x01)) - -#define SP_REGISTER_BASE ((__u16)(0x08)) -#define CONTROL_REGISTER_BASE ((__u16)(0x09)) -#define DCR_REGISTER_BASE ((__u16)(0x16)) - -#define SP1_REGISTER ((__u16)(0x00)) -#define CONTROL1_REGISTER ((__u16)(0x01)) -#define CLK_MULTI_REGISTER ((__u16)(0x02)) -#define CLK_START_VALUE_REGISTER ((__u16)(0x03)) -#define DCR1_REGISTER ((__u16)(0x04)) -#define GPIO_REGISTER ((__u16)(0x07)) - -#define CLOCK_SELECT_REG1 ((__u16)(0x13)) -#define CLOCK_SELECT_REG2 ((__u16)(0x14)) - -#define SERIAL_LCR_DLAB ((__u16)(0x0080)) +#define SERIAL_LCR_DLAB ((__u16)(0x0080)) /* * URB POOL related defines */ -#define NUM_URBS 16 /* URB Count */ -#define URB_TRANSFER_BUFFER_SIZE 32 /* URB Size */ +#define NUM_URBS 16 /* URB Count */ +#define URB_TRANSFER_BUFFER_SIZE 32 /* URB Size */ -// different USB-serial Adapter's ID's table +#define USB_VENDOR_ID_ATENINTL 0x0557 +#define ATENINTL_DEVICE_ID_2011 0x2011 +#define ATENINTL_DEVICE_ID_7820 0x7820 + +/* different USB-serial Adapter's ID's table */ static struct usb_device_id ATENINTL_port_id_table [] = { { USB_DEVICE(USB_VENDOR_ID_ATENINTL,ATENINTL_DEVICE_ID_2011) }, { USB_DEVICE(USB_VENDOR_ID_ATENINTL,ATENINTL_DEVICE_ID_7820) }, @@ -332,14 +248,7 @@ void __exit ATENINTL2011_exit(void); #define ATEN2011_MSR_CD 0x80 /* Current state of CD */ -/* all defines goes here */ - -/* - * Debug related defines - */ - /* 1: Enables the debugging -- 0: Disable the debugging */ - #define ATEN_DEBUG 0 #ifdef ATEN_DEBUG @@ -351,36 +260,26 @@ static int debug = 0; #define DPRINTK(fmt, args...) #endif -//#undef DPRINTK -// #define DPRINTK(fmt, args...) /* * Version Information */ -#define DRIVER_VERSION "1.3.1" +#define DRIVER_VERSION "2.0" #define DRIVER_DESC "ATENINTL 2011 USB Serial Adapter" /* * Defines used for sending commands to port */ -#define WAIT_FOR_EVER (HZ * 0 ) /* timeout urb is wait for ever */ -#define ATEN_WDR_TIMEOUT (HZ * 5 ) /* default urb timeout */ - -#define ATEN_PORT1 0x0200 -#define ATEN_PORT2 0x0300 -#define ATEN_VENREG 0x0000 -#define ATEN_MAX_PORT 0x02 -#define ATEN_WRITE 0x0E -#define ATEN_READ 0x0D +#define ATEN_WDR_TIMEOUT (50) /* default urb timeout */ /* Requests */ -#define ATEN_RD_RTYPE 0xC0 -#define ATEN_WR_RTYPE 0x40 -#define ATEN_RDREQ 0x0D -#define ATEN_WRREQ 0x0E -#define ATEN_CTRL_TIMEOUT 500 -#define VENDOR_READ_LENGTH (0x01) +#define ATEN_RD_RTYPE 0xC0 +#define ATEN_WR_RTYPE 0x40 +#define ATEN_RDREQ 0x0D +#define ATEN_WRREQ 0x0E +#define ATEN_CTRL_TIMEOUT 500 +#define VENDOR_READ_LENGTH (0x01) int RS485mode = 0; //set to 1 for RS485 mode and 0 for RS232 mode @@ -608,7 +507,7 @@ static void ATEN2011_interrupt_callback( DPRINTK("%s", " : Entering\n"); ATEN2011_serial = (struct ATENINTL_serial *)urb->context; - if (!urb) // || ATEN2011_serial->status_polling_started == FALSE ) + if (!urb) // || ATEN2011_serial->status_polling_started == 0 ) { DPRINTK("%s", "Invalid Pointer !!!!:\n"); return; @@ -679,7 +578,7 @@ static void ATEN2011_interrupt_callback( wval = (((__u16) serial->port[i]->number - (__u16) (minor)) + 1) << 8; - if (ATEN2011_port->open != FALSE) { + if (ATEN2011_port->open != 0) { //printk("%s wval is:(for 2011) %x\n",__FUNCTION__,wval); if (sp[i] & 0x01) { @@ -712,7 +611,7 @@ static void ATEN2011_interrupt_callback( } exit: - if (ATEN2011_serial->status_polling_started == FALSE) + if (ATEN2011_serial->status_polling_started == 0) return; result = usb_submit_urb(urb, GFP_ATOMIC); @@ -974,7 +873,7 @@ static void ATEN2011_bulk_out_data_callb } /* Release the Write URB */ - ATEN2011_port->write_in_progress = FALSE; + ATEN2011_port->write_in_progress = 0; //schedule_work(&ATEN2011_port->port->work); tty_kref_put(tty); @@ -1280,7 +1179,7 @@ static int ATEN2011_open(struct tty_stru * were not set up at that time.) */ if (ATEN2011_serial->NoOfOpenPorts == 1) { // start the status polling here - ATEN2011_serial->status_polling_started = TRUE; + ATEN2011_serial->status_polling_started = 1; //if (ATEN2011_serial->interrupt_in_buffer == NULL) // { /* If not yet set, Set here */ @@ -1384,10 +1283,10 @@ static int ATEN2011_open(struct tty_stru /* initialize our port settings */ ATEN2011_port->shadowMCR = MCR_MASTER_IE; /* Must set to enable ints! */ - ATEN2011_port->chaseResponsePending = FALSE; + ATEN2011_port->chaseResponsePending = 0; /* send a open port command */ - ATEN2011_port->openPending = FALSE; - ATEN2011_port->open = TRUE; + ATEN2011_port->openPending = 0; + ATEN2011_port->open = 1; //ATEN2011_change_port_settings(ATEN2011_port,old_termios); /* Setup termios */ ATEN2011_set_termios(tty, port, &tmp_termios); @@ -1477,8 +1376,8 @@ static void ATEN2011_close(struct tty_st //printk("the num of ports opend is:%d\n",ATEN2011_serial->NoOfOpenPorts); if (ATEN2011_serial->NoOfOpenPorts == 0) { //stop the stus polling here - //printk("disabling the status polling flag to FALSE :\n"); - ATEN2011_serial->status_polling_started = FALSE; + //printk("disabling the status polling flag to 0 :\n"); + ATEN2011_serial->status_polling_started = 0; if (ATEN2011_serial->interrupt_read_urb) { DPRINTK("%s", "Shutdown interrupt_read_urb\n"); //ATEN2011_serial->interrupt_in_buffer=NULL; @@ -1501,9 +1400,9 @@ static void ATEN2011_close(struct tty_st //ATEN2011_get_Uart_Reg(port,MODEM_CONTROL_REGISTER,&Data1); //printk("value of MCR after closing the port is : 0x%x\n",Data1); - ATEN2011_port->open = FALSE; - ATEN2011_port->closePending = FALSE; - ATEN2011_port->openPending = FALSE; + ATEN2011_port->open = 0; + ATEN2011_port->closePending = 0; + ATEN2011_port->openPending = 0; DPRINTK("%s \n", "Leaving ............"); } @@ -1538,7 +1437,7 @@ static void ATEN2011_break(struct tty_st } /* flush and chase */ - ATEN2011_port->chaseResponsePending = TRUE; + ATEN2011_port->chaseResponsePending = 1; if (serial->dev) { @@ -1574,7 +1473,7 @@ static void ATEN2011_block_until_chase_r /* Check for Buffer status */ if (count <= 0) { - ATEN2011_port->chaseResponsePending = FALSE; + ATEN2011_port->chaseResponsePending = 0; return; } @@ -2350,8 +2249,6 @@ static int ATEN2011_ioctl(struct tty_str return -EFAULT; return 0; - case TIOCEXBAUD: - return 0; default: break; } @@ -2464,11 +2361,11 @@ static int ATEN2011_send_cmd_write_baud_ ATEN2011_set_Uart_Reg(port, LINE_CONTROL_REGISTER, Data); /* Write the divisor */ - Data = LOW8(divisor); //: commented to test + Data = (unsigned char)(divisor & 0xff); DPRINTK("set_serial_baud Value to write DLL is %x\n", Data); ATEN2011_set_Uart_Reg(port, DIVISOR_LATCH_LSB, Data); - Data = HIGH8(divisor); //: commented to test + Data = (unsigned char)((divisor & 0xff00) >> 8); DPRINTK("set_serial_baud Value to write DLM is %x\n", Data); ATEN2011_set_Uart_Reg(port, DIVISOR_LATCH_MSB, Data); @@ -2772,8 +2669,8 @@ static int ATEN2011_startup(struct usb_s memset(ATEN2011_serial, 0, sizeof(struct ATENINTL_serial)); ATEN2011_serial->serial = serial; - //initilize status polling flag to FALSE - ATEN2011_serial->status_polling_started = FALSE; + //initilize status polling flag to 0 + ATEN2011_serial->status_polling_started = 0; ATEN2011_set_serial_private(serial, ATEN2011_serial); ATEN2011_serial->ATEN2011_spectrum_2or4ports =