From f0d80d9140746ad8fbad12a867b84d57827681b8 Mon Sep 17 00:00:00 2001 From: ADDI-DATA GmbH Date: Thu, 12 Feb 2009 15:14:18 -0800 Subject: Staging: comedi: add addi-data drivers From: ADDI-DATA GmbH This adds the addi-data family of comedi drivers to the staging tree From: ADDI-DATA GmbH Cc: David Schleef Cc: Frank Mori Hess Cc: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c | 1690 +++ drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.h | 84 drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c | 2032 ++++ drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.h | 85 drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.c | 1020 ++ drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.h | 55 drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.c | 5363 ++++++++++++ drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.h | 269 drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.c | 861 + drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.h | 52 drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.c | 3588 ++++++++ drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.h | 79 drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c | 848 + drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.h | 52 drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.c | 2049 ++++ drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.h | 63 drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.c | 1038 ++ drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.h | 56 drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c | 203 drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.h | 59 drivers/staging/comedi/drivers/addi-data/addi_amcc_s5933.h | 490 + drivers/staging/comedi/drivers/addi-data/addi_common.c | 3062 ++++++ drivers/staging/comedi/drivers/addi-data/addi_common.h | 482 + drivers/staging/comedi/drivers/addi-data/addi_eeprom.c | 1158 ++ drivers/staging/comedi/drivers/addi-data/amcc_s5933_58.h | 462 + drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.c | 1265 ++ drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.h | 78 drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c | 600 + drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.h | 129 drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.c | 285 drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.h | 70 drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c | 3045 ++++++ drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.h | 157 drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.c | 542 + drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.h | 71 drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c | 1105 ++ drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.h | 122 drivers/staging/comedi/drivers/addi-data/hwdrv_apci16xx.c | 780 + drivers/staging/comedi/drivers/addi-data/hwdrv_apci16xx.h | 97 drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.c | 460 + drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.h | 77 drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c | 579 + drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.h | 87 drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.c | 549 + drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.h | 67 drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c | 2688 ++++++ drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h | 276 drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c | 3642 ++++++++ drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.h | 191 drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.c | 742 + drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.h | 96 drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.c | 1691 +++ drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.h | 69 drivers/staging/comedi/drivers/addi_apci_035.c | 5 drivers/staging/comedi/drivers/addi_apci_1032.c | 3 drivers/staging/comedi/drivers/addi_apci_1500.c | 3 drivers/staging/comedi/drivers/addi_apci_1516.c | 3 drivers/staging/comedi/drivers/addi_apci_1564.c | 3 drivers/staging/comedi/drivers/addi_apci_16xx.c | 3 drivers/staging/comedi/drivers/addi_apci_1710.c | 3 drivers/staging/comedi/drivers/addi_apci_2016.c | 3 drivers/staging/comedi/drivers/addi_apci_2032.c | 3 drivers/staging/comedi/drivers/addi_apci_2200.c | 3 drivers/staging/comedi/drivers/addi_apci_3001.c | 3 drivers/staging/comedi/drivers/addi_apci_3120.c | 3 drivers/staging/comedi/drivers/addi_apci_3200.c | 3 drivers/staging/comedi/drivers/addi_apci_3300.c | 3 drivers/staging/comedi/drivers/addi_apci_3501.c | 3 drivers/staging/comedi/drivers/addi_apci_3xxx.c | 3 drivers/staging/comedi/drivers/addi_apci_all.c | 18 70 files changed, 44828 insertions(+) create mode 100644 drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c create mode 100644 drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.h create mode 100644 drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c create mode 100644 drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.h create mode 100644 drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.c create mode 100644 drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.h create mode 100644 drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.c create mode 100644 drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.h create mode 100644 drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.c create mode 100644 drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.h create mode 100644 drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.c create mode 100644 drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.h create mode 100644 drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c create mode 100644 drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.h create mode 100644 drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.c create mode 100644 drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.h create mode 100644 drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.c create mode 100644 drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.h create mode 100755 drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c create mode 100755 drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.h create mode 100644 drivers/staging/comedi/drivers/addi-data/addi_amcc_s5933.h create mode 100644 drivers/staging/comedi/drivers/addi-data/addi_common.c create mode 100644 drivers/staging/comedi/drivers/addi-data/addi_common.h create mode 100644 drivers/staging/comedi/drivers/addi-data/addi_eeprom.c create mode 100644 drivers/staging/comedi/drivers/addi-data/amcc_s5933_58.h create mode 100644 drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.c create mode 100644 drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.h create mode 100644 drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c create mode 100644 drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.h create mode 100644 drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.c create mode 100644 drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.h create mode 100644 drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c create mode 100644 drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.h create mode 100644 drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.c create mode 100644 drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.h create mode 100644 drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c create mode 100644 drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.h create mode 100755 drivers/staging/comedi/drivers/addi-data/hwdrv_apci16xx.c create mode 100755 drivers/staging/comedi/drivers/addi-data/hwdrv_apci16xx.h create mode 100644 drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.c create mode 100644 drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.h create mode 100644 drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c create mode 100644 drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.h create mode 100644 drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.c create mode 100644 drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.h create mode 100644 drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c create mode 100644 drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h create mode 100644 drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c create mode 100644 drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.h create mode 100644 drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.c create mode 100644 drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.h create mode 100755 drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.c create mode 100755 drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.h create mode 100644 drivers/staging/comedi/drivers/addi_apci_035.c create mode 100644 drivers/staging/comedi/drivers/addi_apci_1032.c create mode 100644 drivers/staging/comedi/drivers/addi_apci_1500.c create mode 100644 drivers/staging/comedi/drivers/addi_apci_1516.c create mode 100644 drivers/staging/comedi/drivers/addi_apci_1564.c create mode 100644 drivers/staging/comedi/drivers/addi_apci_16xx.c create mode 100644 drivers/staging/comedi/drivers/addi_apci_1710.c create mode 100644 drivers/staging/comedi/drivers/addi_apci_2016.c create mode 100644 drivers/staging/comedi/drivers/addi_apci_2032.c create mode 100644 drivers/staging/comedi/drivers/addi_apci_2200.c create mode 100644 drivers/staging/comedi/drivers/addi_apci_3001.c create mode 100644 drivers/staging/comedi/drivers/addi_apci_3120.c create mode 100644 drivers/staging/comedi/drivers/addi_apci_3200.c create mode 100644 drivers/staging/comedi/drivers/addi_apci_3300.c create mode 100644 drivers/staging/comedi/drivers/addi_apci_3501.c create mode 100644 drivers/staging/comedi/drivers/addi_apci_3xxx.c create mode 100644 drivers/staging/comedi/drivers/addi_apci_all.c --- /dev/null +++ b/drivers/staging/comedi/drivers/addi_apci_035.c @@ -0,0 +1,5 @@ +#define CONFIG_APCI_035 1 + +#define ADDIDATA_WATCHDOG 2 // Or shold it be something else + +#include "addi-data/addi_common.c" --- /dev/null +++ b/drivers/staging/comedi/drivers/addi_apci_1032.c @@ -0,0 +1,3 @@ +#define CONFIG_APCI_1032 1 + +#include "addi-data/addi_common.c" --- /dev/null +++ b/drivers/staging/comedi/drivers/addi_apci_1500.c @@ -0,0 +1,3 @@ +#define CONFIG_APCI_1500 1 + +#include "addi-data/addi_common.c" --- /dev/null +++ b/drivers/staging/comedi/drivers/addi_apci_1516.c @@ -0,0 +1,3 @@ +#define CONFIG_APCI_1516 1 + +#include "addi-data/addi_common.c" --- /dev/null +++ b/drivers/staging/comedi/drivers/addi_apci_1564.c @@ -0,0 +1,3 @@ +#define CONFIG_APCI_1564 1 + +#include "addi-data/addi_common.c" --- /dev/null +++ b/drivers/staging/comedi/drivers/addi_apci_16xx.c @@ -0,0 +1,3 @@ +#define CONFIG_APCI_16XX 1 + +#include "addi-data/addi_common.c" --- /dev/null +++ b/drivers/staging/comedi/drivers/addi_apci_1710.c @@ -0,0 +1,3 @@ +#define CONFIG_APCI_1710 1 + +#include "addi-data/addi_common.c" --- /dev/null +++ b/drivers/staging/comedi/drivers/addi_apci_2016.c @@ -0,0 +1,3 @@ +#define CONFIG_APCI_2016 1 + +#include "addi-data/addi_common.c" --- /dev/null +++ b/drivers/staging/comedi/drivers/addi_apci_2032.c @@ -0,0 +1,3 @@ +#define CONFIG_APCI_2032 1 + +#include "addi-data/addi_common.c" --- /dev/null +++ b/drivers/staging/comedi/drivers/addi_apci_2200.c @@ -0,0 +1,3 @@ +#define CONFIG_APCI_2200 1 + +#include "addi-data/addi_common.c" --- /dev/null +++ b/drivers/staging/comedi/drivers/addi_apci_3001.c @@ -0,0 +1,3 @@ +#define CONFIG_APCI_3001 1 + +#include "addi-data/addi_common.c" --- /dev/null +++ b/drivers/staging/comedi/drivers/addi_apci_3120.c @@ -0,0 +1,3 @@ +#define CONFIG_APCI_3120 1 + +#include "addi-data/addi_common.c" --- /dev/null +++ b/drivers/staging/comedi/drivers/addi_apci_3200.c @@ -0,0 +1,3 @@ +#define CONFIG_APCI_3200 1 + +#include "addi-data/addi_common.c" --- /dev/null +++ b/drivers/staging/comedi/drivers/addi_apci_3300.c @@ -0,0 +1,3 @@ +#define CONFIG_APCI_3300 1 + +#include "addi-data/addi_common.c" --- /dev/null +++ b/drivers/staging/comedi/drivers/addi_apci_3501.c @@ -0,0 +1,3 @@ +#define CONFIG_APCI_3501 1 + +#include "addi-data/addi_common.c" --- /dev/null +++ b/drivers/staging/comedi/drivers/addi_apci_3xxx.c @@ -0,0 +1,3 @@ +#define CONFIG_APCI_3XXX 1 + +#include "addi-data/addi_common.c" --- /dev/null +++ b/drivers/staging/comedi/drivers/addi_apci_all.c @@ -0,0 +1,18 @@ +#define CONFIG_APCI_035 1 +#define CONFIG_APCI_1032 1 +#define CONFIG_APCI_1500 1 +#define CONFIG_APCI_1516 1 +#define CONFIG_APCI_1564 1 +#define CONFIG_APCI_16XX 1 +#define CONFIG_APCI_1710 1 +#define CONFIG_APCI_2016 1 +#define CONFIG_APCI_2032 1 +#define CONFIG_APCI_2200 1 +#define CONFIG_APCI_3001 1 +#define CONFIG_APCI_3120 1 +#define CONFIG_APCI_3200 1 +#define CONFIG_APCI_3300 1 +#define CONFIG_APCI_3501 1 +#define CONFIG_APCI_3XXX 1 + +#include "addi-data/addi_common.c" --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c @@ -0,0 +1,203 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-------------------------------+---------------------------------------+ + | Project : ADDI HEADER READ WRITER | Compiler : Visual C++ | + | Module name : S5920.cpp | Version : 6.0 | + +-------------------------------+---------------------------------------+ + | Author : E. LIBS Date : 02/05/2002 | + +-----------------------------------------------------------------------+ + | Description : DLL with the S5920 PCI Controller functions | + +-----------------------------------------------------------------------+ + | UPDATE'S | + +-----------------------------------------------------------------------+ + | Date | Author | Description of updates | + +----------+-----------+------------------------------------------------+ + | 28/08/02 | LIBS Eric | Add return codes each time a function of the | + | | | Addi Library is called | + +-----------------------------------------------------------------------+ + | 31/07/03 | KRAUTH J. | Changes for the MSX-Box | + +-----------------------------------------------------------------------+ +*/ + +#include "addi_amcc_S5920.h" + +/*+----------------------------------------------------------------------------+*/ +/*| Function Name : INT i_AddiHeaderRW_ReadEeprom |*/ +/*| (INT i_NbOfWordsToRead, |*/ +/*| DWORD dw_PCIBoardEepromAddress, |*/ +/*| WORD w_EepromStartAddress, |*/ +/*| PWORD pw_DataRead) |*/ +/*+----------------------------------------------------------------------------+*/ +/*| Task : Read word from the 5920 eeprom. |*/ +/*+----------------------------------------------------------------------------+*/ +/*| Input Parameters : INT i_NbOfWordsToRead : Nbr. of word to read |*/ +/*| DWORD dw_PCIBoardEepromAddress : Address of the eeprom |*/ +/*| WORD w_EepromStartAddress : Eeprom strat address |*/ +/*+----------------------------------------------------------------------------+*/ +/*| Output Parameters : PWORD pw_DataRead : Read data |*/ +/*+----------------------------------------------------------------------------+*/ +/*| Return Value : - |*/ +/*+----------------------------------------------------------------------------+*/ + +INT i_AddiHeaderRW_ReadEeprom(INT i_NbOfWordsToRead, + DWORD dw_PCIBoardEepromAddress, + WORD w_EepromStartAddress, PWORD pw_DataRead) +{ + DWORD dw_eeprom_busy = 0; + INT i_Counter = 0; + INT i_WordCounter; + INT i; + BYTE pb_ReadByte[1]; + BYTE b_ReadLowByte = 0; + BYTE b_ReadHighByte = 0; + BYTE b_SelectedAddressLow = 0; + BYTE b_SelectedAddressHigh = 0; + WORD w_ReadWord = 0; + + for (i_WordCounter = 0; i_WordCounter < i_NbOfWordsToRead; + i_WordCounter++) { + do { + dw_eeprom_busy = + inl(dw_PCIBoardEepromAddress + + AMCC_OP_REG_MCSR); + dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; + } + while (dw_eeprom_busy == EEPROM_BUSY); + + for (i_Counter = 0; i_Counter < 2; i_Counter++) { + b_SelectedAddressLow = (w_EepromStartAddress + i_Counter) % 256; //Read the low 8 bit part + b_SelectedAddressHigh = (w_EepromStartAddress + i_Counter) / 256; //Read the high 8 bit part + + //Select the load low address mode + outb(NVCMD_LOAD_LOW, + dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR + + 3); + + //Wait on busy + do { + dw_eeprom_busy = + inl(dw_PCIBoardEepromAddress + + AMCC_OP_REG_MCSR); + dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; + } + while (dw_eeprom_busy == EEPROM_BUSY); + + //Load the low address + outb(b_SelectedAddressLow, + dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR + + 2); + + //Wait on busy + do { + dw_eeprom_busy = + inl(dw_PCIBoardEepromAddress + + AMCC_OP_REG_MCSR); + dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; + } + while (dw_eeprom_busy == EEPROM_BUSY); + + //Select the load high address mode + outb(NVCMD_LOAD_HIGH, + dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR + + 3); + + //Wait on busy + do { + dw_eeprom_busy = + inl(dw_PCIBoardEepromAddress + + AMCC_OP_REG_MCSR); + dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; + } + while (dw_eeprom_busy == EEPROM_BUSY); + + //Load the high address + outb(b_SelectedAddressHigh, + dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR + + 2); + + //Wait on busy + do { + dw_eeprom_busy = + inl(dw_PCIBoardEepromAddress + + AMCC_OP_REG_MCSR); + dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; + } + while (dw_eeprom_busy == EEPROM_BUSY); + + //Select the READ mode + outb(NVCMD_BEGIN_READ, + dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR + + 3); + + //Wait on busy + do { + dw_eeprom_busy = + inl(dw_PCIBoardEepromAddress + + AMCC_OP_REG_MCSR); + dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; + } + while (dw_eeprom_busy == EEPROM_BUSY); + + //Read data into the EEPROM + *pb_ReadByte = + inb(dw_PCIBoardEepromAddress + + AMCC_OP_REG_MCSR + 2); + + //Wait on busy + do { + dw_eeprom_busy = + inl(dw_PCIBoardEepromAddress + + AMCC_OP_REG_MCSR); + dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; + } + while (dw_eeprom_busy == EEPROM_BUSY); + + //Select the upper address part + if (i_Counter == 0) { + b_ReadLowByte = pb_ReadByte[0]; + } else { + b_ReadHighByte = pb_ReadByte[0]; + } + + //Sleep + for (i = 0; i < 10000; i++) ; + + } + w_ReadWord = + (b_ReadLowByte | (((unsigned short)b_ReadHighByte) * + 256)); + + pw_DataRead[i_WordCounter] = w_ReadWord; + + w_EepromStartAddress += 2; // to read the next word + + } // for (...) i_NbOfWordsToRead + return (0); +} --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.h @@ -0,0 +1,59 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* +#define VOID void +#define INT int +#define UINT unsigned int +#define SHORT short +#define USHORT unsigned short +#define CHAR char +#define BYTE unsigned char +#define WORD unsigned int +#define LONG long +#define ULONG unsigned long +#define DWORD unsigned long +#define DOUBLE double +#define PINT int * +#define PUINT unsigned int * +#define PSHORT short * +#define PUSHORT unsigned short * +#define PCHAR char * +#define PBYTE unsigned char * +#define PWORD unsigned int * +#define PLONG long * +#define PULONG unsigned long * +#define PDWORD unsigned long * +#define PDOUBLE double * +*/ + +#define AMCC_OP_REG_MCSR 0x3c +#define EEPROM_BUSY 0x80000000 +#define NVCMD_LOAD_LOW (0x4 << 5 ) // nvRam load low command +#define NVCMD_LOAD_HIGH (0x5 << 5 ) // nvRam load high command +#define NVCMD_BEGIN_READ (0x7 << 5 ) // nvRam begin read command +#define NVCMD_BEGIN_WRITE (0x6 << 5) //EEPROM begin write command + +INT i_AddiHeaderRW_ReadEeprom(INT i_NbOfWordsToRead, + DWORD dw_PCIBoardEepromAddress, + WORD w_EepromStartAddress, PWORD pw_DataRead); --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/addi_amcc_s5933.h @@ -0,0 +1,490 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstrasse 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-----------------------------------------------------------------------+ + | Project : ADDI DATA | Compiler : GCC | + | Modulname : addi_amcc_s5933.h | Version : 2.96 Redhat Linux | + | | kernel-2.4.2 | + +-------------------------------+---------------------------------------+ + | Author : | Date : | + +-----------------------------------------------------------------------+ + | Description :|Header file for AMCC s 5933 | + +-----------------------------------------------------------------------+ + | UPDATE'S | + +-----------------------------------------------------------------------+ + | Date | Author | Description of updates | + +----------+-----------+------------------------------------------------+ + | | | | + | | | | + | | | | + | | | | + | | | | + +----------+-----------+------------------------------------------------+ + | | | | + | | | | + | | | | + +----------+-----------+------------------------------------------------+ +*/ + +#ifndef _AMCC_S5933_H_ +#define _AMCC_S5933_H_ + +#include "../../comedidev.h" + +#include "../comedi_pci.h" + +#ifdef PCI_SUPPORT_VER1 +#error No support for 2.1.55 and older +#endif + +#define FIFO_ADVANCE_ON_BYTE_2 0x20000000 // written on base0 + +#define AMWEN_ENABLE 0x02 // added for step 6 dma written on base2 +#define A2P_FIFO_WRITE_ENABLE 0x01 + +#define AGCSTS_TC_ENABLE 0x10000000 // for transfer count enable bit + +// ADDON RELATED ADDITIONS +// Constant +#define APCI3120_ENABLE_TRANSFER_ADD_ON_LOW 0x00 +#define APCI3120_ENABLE_TRANSFER_ADD_ON_HIGH 0x1200 +#define APCI3120_A2P_FIFO_MANAGEMENT 0x04000400L +#define APCI3120_AMWEN_ENABLE 0x02 +#define APCI3120_A2P_FIFO_WRITE_ENABLE 0x01 +#define APCI3120_FIFO_ADVANCE_ON_BYTE_2 0x20000000L +#define APCI3120_ENABLE_WRITE_TC_INT 0x00004000L +#define APCI3120_CLEAR_WRITE_TC_INT 0x00040000L +#define APCI3120_DISABLE_AMWEN_AND_A2P_FIFO_WRITE 0x0 +#define APCI3120_DISABLE_BUS_MASTER_ADD_ON 0x0 +#define APCI3120_DISABLE_BUS_MASTER_PCI 0x0 + + // ADD_ON ::: this needed since apci supports 16 bit interface to add on +#define APCI3120_ADD_ON_AGCSTS_LOW 0x3C +#define APCI3120_ADD_ON_AGCSTS_HIGH APCI3120_ADD_ON_AGCSTS_LOW + 2 +#define APCI3120_ADD_ON_MWAR_LOW 0x24 +#define APCI3120_ADD_ON_MWAR_HIGH APCI3120_ADD_ON_MWAR_LOW + 2 +#define APCI3120_ADD_ON_MWTC_LOW 0x058 +#define APCI3120_ADD_ON_MWTC_HIGH APCI3120_ADD_ON_MWTC_LOW + 2 + +// AMCC +#define APCI3120_AMCC_OP_MCSR 0x3C +#define APCI3120_AMCC_OP_REG_INTCSR 0x38 + +/****************************************************************************/ +/* AMCC Operation Register Offsets - PCI */ +/****************************************************************************/ + +#define AMCC_OP_REG_OMB1 0x00 +#define AMCC_OP_REG_OMB2 0x04 +#define AMCC_OP_REG_OMB3 0x08 +#define AMCC_OP_REG_OMB4 0x0c +#define AMCC_OP_REG_IMB1 0x10 +#define AMCC_OP_REG_IMB2 0x14 +#define AMCC_OP_REG_IMB3 0x18 +#define AMCC_OP_REG_IMB4 0x1c +#define AMCC_OP_REG_FIFO 0x20 +#define AMCC_OP_REG_MWAR 0x24 +#define AMCC_OP_REG_MWTC 0x28 +#define AMCC_OP_REG_MRAR 0x2c +#define AMCC_OP_REG_MRTC 0x30 +#define AMCC_OP_REG_MBEF 0x34 +#define AMCC_OP_REG_INTCSR 0x38 +#define AMCC_OP_REG_INTCSR_SRC (AMCC_OP_REG_INTCSR + 2) /* INT source */ +#define AMCC_OP_REG_INTCSR_FEC (AMCC_OP_REG_INTCSR + 3) /* FIFO ctrl */ +#define AMCC_OP_REG_MCSR 0x3c +#define AMCC_OP_REG_MCSR_NVDATA (AMCC_OP_REG_MCSR + 2) /* Data in byte 2 */ +#define AMCC_OP_REG_MCSR_NVCMD (AMCC_OP_REG_MCSR + 3) /* Command in byte 3 */ + +#define AMCC_FIFO_DEPTH_DWORD 8 +#define AMCC_FIFO_DEPTH_BYTES (8 * sizeof (u32)) + +/****************************************************************************/ +/* AMCC Operation Registers Size - PCI */ +/****************************************************************************/ + +#define AMCC_OP_REG_SIZE 64 /* in bytes */ + +/****************************************************************************/ +/* AMCC Operation Register Offsets - Add-on */ +/****************************************************************************/ + +#define AMCC_OP_REG_AIMB1 0x00 +#define AMCC_OP_REG_AIMB2 0x04 +#define AMCC_OP_REG_AIMB3 0x08 +#define AMCC_OP_REG_AIMB4 0x0c +#define AMCC_OP_REG_AOMB1 0x10 +#define AMCC_OP_REG_AOMB2 0x14 +#define AMCC_OP_REG_AOMB3 0x18 +#define AMCC_OP_REG_AOMB4 0x1c +#define AMCC_OP_REG_AFIFO 0x20 +#define AMCC_OP_REG_AMWAR 0x24 +#define AMCC_OP_REG_APTA 0x28 +#define AMCC_OP_REG_APTD 0x2c +#define AMCC_OP_REG_AMRAR 0x30 +#define AMCC_OP_REG_AMBEF 0x34 +#define AMCC_OP_REG_AINT 0x38 +#define AMCC_OP_REG_AGCSTS 0x3c +#define AMCC_OP_REG_AMWTC 0x58 +#define AMCC_OP_REG_AMRTC 0x5c + +/****************************************************************************/ +/* AMCC - Add-on General Control/Status Register */ +/****************************************************************************/ + +#define AGCSTS_CONTROL_MASK 0xfffff000 +#define AGCSTS_NV_ACC_MASK 0xe0000000 +#define AGCSTS_RESET_MASK 0x0e000000 +#define AGCSTS_NV_DA_MASK 0x00ff0000 +#define AGCSTS_BIST_MASK 0x0000f000 +#define AGCSTS_STATUS_MASK 0x000000ff +#define AGCSTS_TCZERO_MASK 0x000000c0 +#define AGCSTS_FIFO_ST_MASK 0x0000003f + +#define AGCSTS_RESET_MBFLAGS 0x08000000 +#define AGCSTS_RESET_P2A_FIFO 0x04000000 +#define AGCSTS_RESET_A2P_FIFO 0x02000000 +#define AGCSTS_RESET_FIFOS (AGCSTS_RESET_A2P_FIFO | AGCSTS_RESET_P2A_FIFO) + +#define AGCSTS_A2P_TCOUNT 0x00000080 +#define AGCSTS_P2A_TCOUNT 0x00000040 + +#define AGCSTS_FS_P2A_EMPTY 0x00000020 +#define AGCSTS_FS_P2A_HALF 0x00000010 +#define AGCSTS_FS_P2A_FULL 0x00000008 + +#define AGCSTS_FS_A2P_EMPTY 0x00000004 +#define AGCSTS_FS_A2P_HALF 0x00000002 +#define AGCSTS_FS_A2P_FULL 0x00000001 + +/****************************************************************************/ +/* AMCC - Add-on Interrupt Control/Status Register */ +/****************************************************************************/ + +#define AINT_INT_MASK 0x00ff0000 +#define AINT_SEL_MASK 0x0000ffff +#define AINT_IS_ENSEL_MASK 0x00001f1f + +#define AINT_INT_ASSERTED 0x00800000 +#define AINT_BM_ERROR 0x00200000 +#define AINT_BIST_INT 0x00100000 + +#define AINT_RT_COMPLETE 0x00080000 +#define AINT_WT_COMPLETE 0x00040000 + +#define AINT_OUT_MB_INT 0x00020000 +#define AINT_IN_MB_INT 0x00010000 + +#define AINT_READ_COMPL 0x00008000 +#define AINT_WRITE_COMPL 0x00004000 + +#define AINT_OMB_ENABLE 0x00001000 +#define AINT_OMB_SELECT 0x00000c00 +#define AINT_OMB_BYTE 0x00000300 + +#define AINT_IMB_ENABLE 0x00000010 +#define AINT_IMB_SELECT 0x0000000c +#define AINT_IMB_BYTE 0x00000003 + +/* Enable Bus Mastering */ +#define EN_A2P_TRANSFERS 0x00000400 +/* FIFO Flag Reset */ +#define RESET_A2P_FLAGS 0x04000000L +/* FIFO Relative Priority */ +#define A2P_HI_PRIORITY 0x00000100L +/* Identify Interrupt Sources */ +#define ANY_S593X_INT 0x00800000L +#define READ_TC_INT 0x00080000L +#define WRITE_TC_INT 0x00040000L +#define IN_MB_INT 0x00020000L +#define MASTER_ABORT_INT 0x00100000L +#define TARGET_ABORT_INT 0x00200000L +#define BUS_MASTER_INT 0x00200000L + +/****************************************************************************/ + +struct pcilst_struct { + struct pcilst_struct *next; + int used; + struct pci_dev *pcidev; + unsigned short vendor; + unsigned short device; + unsigned char pci_bus; + unsigned char pci_slot; + unsigned char pci_func; + resource_size_t io_addr[5]; + unsigned int irq; +}; + +struct pcilst_struct *amcc_devices; // ptr to root list of all amcc devices + +static const int i_ADDIDATADeviceID[] = { 0x15B8, 0x10E8 }; + +/****************************************************************************/ + +void v_pci_card_list_init(unsigned short pci_vendor, char display); +void v_pci_card_list_cleanup(unsigned short pci_vendor); +struct pcilst_struct *ptr_find_free_pci_card_by_device(unsigned short vendor_id, + unsigned short device_id); +int i_find_free_pci_card_by_position(unsigned short vendor_id, + unsigned short device_id, unsigned short pci_bus, + unsigned short pci_slot, struct pcilst_struct **card); +struct pcilst_struct *ptr_select_and_alloc_pci_card(unsigned short vendor_id, + unsigned short device_id, unsigned short pci_bus, + unsigned short pci_slot, int i_Master); + +int pci_card_alloc(struct pcilst_struct *amcc, int master); +int i_pci_card_free(struct pcilst_struct *amcc); +void v_pci_card_list_display(void); +int i_pci_card_data(struct pcilst_struct *amcc, + unsigned char *pci_bus, unsigned char *pci_slot, + unsigned char *pci_func, resource_size_t * io_addr, unsigned int *irq); + +/****************************************************************************/ + +/* build list of amcc cards in this system */ +void v_pci_card_list_init(unsigned short pci_vendor, char display) +{ + struct pci_dev *pcidev; + struct pcilst_struct *amcc, *last; + int i; + int i_Count = 0; + amcc_devices = NULL; + last = NULL; + + for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL); + pcidev != NULL; + pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) { + for (i_Count = 0; i_Count < 2; i_Count++) { + pci_vendor = i_ADDIDATADeviceID[i_Count]; + if (pcidev->vendor == pci_vendor) { + amcc = kmalloc(sizeof(*amcc), GFP_KERNEL); + memset(amcc, 0, sizeof(*amcc)); + + amcc->pcidev = pcidev; + if (last) { + last->next = amcc; + } else { + amcc_devices = amcc; + } + last = amcc; + + amcc->vendor = pcidev->vendor; + amcc->device = pcidev->device; + amcc->pci_bus = pcidev->bus->number; + amcc->pci_slot = PCI_SLOT(pcidev->devfn); + amcc->pci_func = PCI_FUNC(pcidev->devfn); + /* Note: resources may be invalid if PCI device + * not enabled, but they are corrected in + * pci_card_alloc. */ + for (i = 0; i < 5; i++) + amcc->io_addr[i] = + pci_resource_start(pcidev, i); + amcc->irq = pcidev->irq; + + } + } + } + + if (display) + v_pci_card_list_display(); +} + +/****************************************************************************/ +/* free up list of amcc cards in this system */ +void v_pci_card_list_cleanup(unsigned short pci_vendor) +{ + struct pcilst_struct *amcc, *next; + + for (amcc = amcc_devices; amcc; amcc = next) { + next = amcc->next; + kfree(amcc); + } + + amcc_devices = NULL; +} + +/****************************************************************************/ +/* find first unused card with this device_id */ +struct pcilst_struct *ptr_find_free_pci_card_by_device(unsigned short vendor_id, + unsigned short device_id) +{ + struct pcilst_struct *amcc, *next; + + for (amcc = amcc_devices; amcc; amcc = next) { + next = amcc->next; + if ((!amcc->used) && (amcc->device == device_id) + && (amcc->vendor == vendor_id)) + return amcc; + + } + + return NULL; +} + +/****************************************************************************/ +/* find card on requested position */ +int i_find_free_pci_card_by_position(unsigned short vendor_id, + unsigned short device_id, unsigned short pci_bus, + unsigned short pci_slot, struct pcilst_struct **card) +{ + struct pcilst_struct *amcc, *next; + + *card = NULL; + for (amcc = amcc_devices; amcc; amcc = next) { + next = amcc->next; + if ((amcc->vendor == vendor_id) && (amcc->device == device_id) + && (amcc->pci_bus == pci_bus) + && (amcc->pci_slot == pci_slot)) { + if (!(amcc->used)) { + *card = amcc; + return 0; // ok, card is found + } else { + rt_printk + (" - \nCard on requested position is used b:s %d:%d!\n", + pci_bus, pci_slot); + return 2; // card exist but is used + } + } + } + + return 1; // no card found +} + +/****************************************************************************/ +/* mark card as used */ +int pci_card_alloc(struct pcilst_struct *amcc, int master) +{ + int i; + + if (!amcc) + return -1; + + if (amcc->used) + return 1; + if (comedi_pci_enable(amcc->pcidev, "addi_amcc_s5933")) + return -1; + /* Resources will be accurate now. */ + for (i = 0; i < 5; i++) + amcc->io_addr[i] = pci_resource_start(amcc->pcidev, i); + if (master) + pci_set_master(amcc->pcidev); + amcc->used = 1; + + return 0; +} + +/****************************************************************************/ +/* mark card as free */ +int i_pci_card_free(struct pcilst_struct *amcc) +{ + if (!amcc) + return -1; + + if (!amcc->used) + return 1; + amcc->used = 0; + comedi_pci_disable(amcc->pcidev); + return 0; +} + +/****************************************************************************/ +/* display list of found cards */ +void v_pci_card_list_display(void) +{ + struct pcilst_struct *amcc, *next; + + printk("List of pci cards\n"); + printk("bus:slot:func vendor device io_amcc io_daq irq used\n"); + + for (amcc = amcc_devices; amcc; amcc = next) { + next = amcc->next; + printk("%2d %2d %2d 0x%4x 0x%4x 0x%8llx 0x%8llx %2u %2d\n", amcc->pci_bus, amcc->pci_slot, amcc->pci_func, amcc->vendor, amcc->device, (unsigned long long)amcc->io_addr[0], (unsigned long long)amcc->io_addr[2], amcc->irq, amcc->used); + + } +} + +/****************************************************************************/ +/* return all card information for driver */ +int i_pci_card_data(struct pcilst_struct *amcc, + unsigned char *pci_bus, unsigned char *pci_slot, + unsigned char *pci_func, resource_size_t * io_addr, unsigned int *irq) +{ + int i; + + if (!amcc) + return -1; + *pci_bus = amcc->pci_bus; + *pci_slot = amcc->pci_slot; + *pci_func = amcc->pci_func; + for (i = 0; i < 5; i++) + io_addr[i] = amcc->io_addr[i]; + *irq = amcc->irq; + return 0; +} + +/****************************************************************************/ +/* select and alloc card */ +struct pcilst_struct *ptr_select_and_alloc_pci_card(unsigned short vendor_id, + unsigned short device_id, unsigned short pci_bus, + unsigned short pci_slot, int i_Master) +{ + struct pcilst_struct *card; + + if ((pci_bus < 1) & (pci_slot < 1)) { // use autodetection + if ((card = ptr_find_free_pci_card_by_device(vendor_id, + device_id)) == NULL) { + rt_printk(" - Unused card not found in system!\n"); + return NULL; + } + } else { + switch (i_find_free_pci_card_by_position(vendor_id, device_id, + pci_bus, pci_slot, &card)) { + case 1: + rt_printk + (" - Card not found on requested position b:s %d:%d!\n", + pci_bus, pci_slot); + return NULL; + case 2: + rt_printk + (" - Card on requested position is used b:s %d:%d!\n", + pci_bus, pci_slot); + return NULL; + } + } + + if (pci_card_alloc(card, i_Master) != 0) { + rt_printk(" - Can't allocate card!\n"); + return NULL; + + } + + return card; +} +#endif --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/addi_common.c @@ -0,0 +1,3062 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstrasse 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-----------------------------------------------------------------------+ + | Project : ADDI DATA | Compiler : GCC | + | Modulname : addi_common.c | Version : 2.96 | + +-------------------------------+---------------------------------------+ + | Author : | Date : | + +-----------------------------------------------------------------------+ + | Description : ADDI COMMON Main Module | + +-----------------------------------------------------------------------+ + | CONFIG OPTIONS | + | option[0] - PCI bus number - if bus number and slot number are 0, | + | then driver search for first unused card | + | option[1] - PCI slot number | + | | + | option[2] = 0 - DMA ENABLE | + | = 1 - DMA DISABLE | + +----------+-----------+------------------------------------------------+ +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "../../comedidev.h" +#include +#if defined(CONFIG_APCI_1710) || defined(CONFIG_APCI_3200) || defined(CONFIG_APCI_3300) +#include +#endif +#include "../comedi_fc.h" + +#include "addi_common.h" +#include "addi_amcc_s5933.h" + +//Update-0.7.57->0.7.68MODULE_AUTHOR("ADDI-DATA GmbH "); +//Update-0.7.57->0.7.68MODULE_DESCRIPTION("Comedi ADDI-DATA module"); +//Update-0.7.57->0.7.68MODULE_LICENSE("GPL"); + +#define devpriv ((addi_private *)dev->private) +#define this_board ((boardtype *)dev->board_ptr) + +#if defined(CONFIG_APCI_1710) || defined(CONFIG_APCI_3200) || defined(CONFIG_APCI_3300) +//BYTE b_SaveFPUReg [94]; + +void fpu_begin(void) +{ + //asm ("fstenv b_SaveFPUReg"); + kernel_fpu_begin(); +} + +void fpu_end(void) +{ + // asm ("frstor b_SaveFPUReg"); + kernel_fpu_end(); +} +#endif + +#include "addi_eeprom.c" +#if (defined (CONFIG_APCI_3120) || defined (CONFIG_APCI_3001)) +#include "hwdrv_apci3120.c" +#endif +#ifdef CONFIG_APCI_1032 +#include "hwdrv_apci1032.c" +#endif +#ifdef CONFIG_APCI_1516 +#include "hwdrv_apci1516.c" +#endif +#ifdef CONFIG_APCI_2016 +#include "hwdrv_apci2016.c" +#endif +#ifdef CONFIG_APCI_2032 +#include "hwdrv_apci2032.c" +#endif +#ifdef CONFIG_APCI_2200 +#include "hwdrv_apci2200.c" +#endif +#ifdef CONFIG_APCI_1564 +#include "hwdrv_apci1564.c" +#endif +#ifdef CONFIG_APCI_1500 +#include "hwdrv_apci1500.c" +#endif +#ifdef CONFIG_APCI_3501 +#include "hwdrv_apci3501.c" +#endif +#ifdef CONFIG_APCI_035 +#include "hwdrv_apci035.c" +#endif +#if (defined (CONFIG_APCI_3200) || defined (CONFIG_APCI_3300)) +#include "hwdrv_apci3200.c" +#endif +#ifdef CONFIG_APCI_1710 +#include "hwdrv_APCI1710.c" +#endif +#ifdef CONFIG_APCI_16XX +#include "hwdrv_apci16xx.c" +#endif +#ifdef CONFIG_APCI_3XXX +#include "hwdrv_apci3xxx.c" +#endif + +#ifndef COMEDI_SUBD_TTLIO +#define COMEDI_SUBD_TTLIO 11 /* Digital Input Output But TTL */ +#endif + +static DEFINE_PCI_DEVICE_TABLE(addi_apci_tbl) = { +#ifdef CONFIG_APCI_3120 + {APCI3120_BOARD_VENDOR_ID, 0x818D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, +#endif +#ifdef CONFIG_APCI_1032 + {APCI1032_BOARD_VENDOR_ID, 0x1003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, +#endif +#ifdef CONFIG_APCI_1516 + {APCI1516_BOARD_VENDOR_ID, 0x1001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, +#endif +#ifdef CONFIG_APCI_2016 + {APCI2016_BOARD_VENDOR_ID, 0x1002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, +#endif +#ifdef CONFIG_APCI_2032 + {APCI2032_BOARD_VENDOR_ID, 0x1004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, +#endif +#ifdef CONFIG_APCI_2200 + {APCI2200_BOARD_VENDOR_ID, 0x1005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, +#endif +#ifdef CONFIG_APCI_1564 + {APCI1564_BOARD_VENDOR_ID, 0x1006, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, +#endif +#ifdef CONFIG_APCI_1500 + {APCI1500_BOARD_VENDOR_ID, 0x80fc, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, +#endif +#ifdef CONFIG_APCI_3001 + {APCI3120_BOARD_VENDOR_ID, 0x828D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, +#endif +#ifdef CONFIG_APCI_3501 + {APCI3501_BOARD_VENDOR_ID, 0x3001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, +#endif +#ifdef CONFIG_APCI_035 + {APCI035_BOARD_VENDOR_ID, 0x0300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, +#endif +#ifdef CONFIG_APCI_3200 + {APCI3200_BOARD_VENDOR_ID, 0x3000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, +#endif +#ifdef CONFIG_APCI_3300 + {APCI3200_BOARD_VENDOR_ID, 0x3007, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, +#endif +#ifdef CONFIG_APCI_1710 + {APCI1710_BOARD_VENDOR_ID, APCI1710_BOARD_DEVICE_ID, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, +#endif +#ifdef CONFIG_APCI_16XX + {0x15B8, 0x1009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x15B8, 0x100A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, +#endif +#ifdef CONFIG_APCI_3XXX + {0x15B8, 0x3010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x15B8, 0x300F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x15B8, 0x300E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x15B8, 0x3013, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x15B8, 0x3014, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x15B8, 0x3015, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x15B8, 0x3016, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x15B8, 0x3017, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x15B8, 0x3018, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x15B8, 0x3019, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x15B8, 0x301A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x15B8, 0x301B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x15B8, 0x301C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x15B8, 0x301D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x15B8, 0x301E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x15B8, 0x301F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x15B8, 0x3020, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x15B8, 0x3021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x15B8, 0x3022, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x15B8, 0x3023, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x15B8, 0x300B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x15B8, 0x3002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x15B8, 0x3003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x15B8, 0x3004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x15B8, 0x3024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, +#endif + {0} +}; + +MODULE_DEVICE_TABLE(pci, addi_apci_tbl); + +static const boardtype boardtypes[] = { +#ifdef CONFIG_APCI_3120 + {"apci3120", + APCI3120_BOARD_VENDOR_ID, + 0x818D, + AMCC_OP_REG_SIZE, + APCI3120_ADDRESS_RANGE, + 8, + 0, + ADDIDATA_NO_EEPROM, + NULL, + 16, + 8, + 16, + 8, + 0xffff, + 0x3fff, + &range_apci3120_ai, + &range_apci3120_ao, + 4, + 4, + 0x0f, + 0, + NULL, + 1, + 1, + 1, + 10000, + 100000, + v_APCI3120_Interrupt, + i_APCI3120_Reset, + i_APCI3120_InsnConfigAnalogInput, + i_APCI3120_InsnReadAnalogInput, + NULL, + NULL, + i_APCI3120_CommandTestAnalogInput, + i_APCI3120_CommandAnalogInput, + i_APCI3120_StopCyclicAcquisition, + NULL, + i_APCI3120_InsnWriteAnalogOutput, + NULL, + NULL, + i_APCI3120_InsnReadDigitalInput, + NULL, + i_APCI3120_InsnBitsDigitalInput, + i_APCI3120_InsnConfigDigitalOutput, + i_APCI3120_InsnWriteDigitalOutput, + i_APCI3120_InsnBitsDigitalOutput, + NULL, + i_APCI3120_InsnConfigTimer, + i_APCI3120_InsnWriteTimer, + i_APCI3120_InsnReadTimer, + NULL, + NULL, + NULL, + NULL, + NULL}, +#endif +#ifdef CONFIG_APCI_1032 + {"apci1032", + APCI1032_BOARD_VENDOR_ID, + 0x1003, + 4, + APCI1032_ADDRESS_RANGE, + 0, + 0, + ADDIDATA_EEPROM, + ADDIDATA_93C76, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 32, + 0, + 0, + 0, + NULL, + 0, + 0, + 0, + 0, + 0, + v_APCI1032_Interrupt, + i_APCI1032_Reset, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI1032_ConfigDigitalInput, + i_APCI1032_Read1DigitalInput, + NULL, + i_APCI1032_ReadMoreDigitalInput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL}, +#endif +#ifdef CONFIG_APCI_1516 + {"apci1516", + APCI1516_BOARD_VENDOR_ID, + 0x1001, + 128, + APCI1516_ADDRESS_RANGE, + 32, + 0, + ADDIDATA_EEPROM, + ADDIDATA_S5920, + 0, + 0, + 0, + 0, + 0, + 0, + NULL, + NULL, + 8, + 8, + 0, + 0, + NULL, + 0, + 1, + 0, + 0, + 0, + NULL, + i_APCI1516_Reset, + NULL, NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI1516_Read1DigitalInput, + NULL, + i_APCI1516_ReadMoreDigitalInput, + i_APCI1516_ConfigDigitalOutput, + i_APCI1516_WriteDigitalOutput, + i_APCI1516_ReadDigitalOutput, + NULL, + i_APCI1516_ConfigWatchdog, + i_APCI1516_StartStopWriteWatchdog, + i_APCI1516_ReadWatchdog, + NULL, + NULL, + NULL, + NULL, + NULL}, +#endif +#ifdef CONFIG_APCI_2016 + {"apci2016", + APCI2016_BOARD_VENDOR_ID, + 0x1002, + 128, + APCI2016_ADDRESS_RANGE, + 32, + 0, + ADDIDATA_EEPROM, + ADDIDATA_S5920, + 0, + 0, + 0, + 0, + 0, + 0, + NULL, + NULL, + 0, + 16, + 0, + 0, + NULL, + 0, + 1, + 0, + 0, + 0, + NULL, + i_APCI2016_Reset, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI2016_ConfigDigitalOutput, + i_APCI2016_WriteDigitalOutput, + i_APCI2016_BitsDigitalOutput, + NULL, + i_APCI2016_ConfigWatchdog, + i_APCI2016_StartStopWriteWatchdog, + i_APCI2016_ReadWatchdog, + NULL, + NULL, + NULL, + NULL, + NULL}, +#endif +#ifdef CONFIG_APCI_2032 + {"apci2032", + APCI2032_BOARD_VENDOR_ID, + 0x1004, + 4, + APCI2032_ADDRESS_RANGE, + 0, + 0, + ADDIDATA_EEPROM, + ADDIDATA_93C76, + 0, + 0, + 0, + 0, + 0, + 0, + NULL, + NULL, + 0, + 32, + 0xffffffff, + 0, + NULL, + 0, + 1, + 0, + 0, + 0, + v_APCI2032_Interrupt, + i_APCI2032_Reset, + NULL, NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI2032_ConfigDigitalOutput, + i_APCI2032_WriteDigitalOutput, + i_APCI2032_ReadDigitalOutput, + i_APCI2032_ReadInterruptStatus, + i_APCI2032_ConfigWatchdog, + i_APCI2032_StartStopWriteWatchdog, + i_APCI2032_ReadWatchdog, + NULL, + NULL, + NULL, + NULL, + NULL}, +#endif +#ifdef CONFIG_APCI_2200 + {"apci2200", + APCI2200_BOARD_VENDOR_ID, + 0x1005, + 4, + APCI2200_ADDRESS_RANGE, + 0, + 0, + ADDIDATA_EEPROM, + ADDIDATA_93C76, + 0, + 0, + 0, + 0, + 0, + 0, + NULL, + NULL, + 8, + 16, + 0, + 0, + NULL, + 0, + 1, + 0, + 0, + 0, + NULL, + i_APCI2200_Reset, + NULL, NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI2200_Read1DigitalInput, + NULL, + i_APCI2200_ReadMoreDigitalInput, + i_APCI2200_ConfigDigitalOutput, + i_APCI2200_WriteDigitalOutput, + i_APCI2200_ReadDigitalOutput, + NULL, + i_APCI2200_ConfigWatchdog, + i_APCI2200_StartStopWriteWatchdog, + i_APCI2200_ReadWatchdog, + NULL, + NULL, + NULL, + NULL, + NULL}, +#endif +#ifdef CONFIG_APCI_1564 + {"apci1564", + APCI1564_BOARD_VENDOR_ID, + 0x1006, + 128, + APCI1564_ADDRESS_RANGE, + 0, + 0, + ADDIDATA_EEPROM, + ADDIDATA_93C76, + 0, + 0, + 0, + 0, + 0, + 0, + NULL, + NULL, + 32, + 32, + 0xffffffff, + 0, + NULL, + 0, + 1, + 0, + 0, + 0, + v_APCI1564_Interrupt, + i_APCI1564_Reset, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI1564_ConfigDigitalInput, + i_APCI1564_Read1DigitalInput, + NULL, + i_APCI1564_ReadMoreDigitalInput, + i_APCI1564_ConfigDigitalOutput, + i_APCI1564_WriteDigitalOutput, + i_APCI1564_ReadDigitalOutput, + i_APCI1564_ReadInterruptStatus, + i_APCI1564_ConfigTimerCounterWatchdog, + i_APCI1564_StartStopWriteTimerCounterWatchdog, + i_APCI1564_ReadTimerCounterWatchdog, + NULL, + NULL, + NULL, + NULL, + NULL}, +#endif +#ifdef CONFIG_APCI_1500 + {"apci1500", + APCI1500_BOARD_VENDOR_ID, + 0x80fc, + 128, + APCI1500_ADDRESS_RANGE, + 4, + 0, + ADDIDATA_NO_EEPROM, + NULL, + 0, + 0, + 0, + 0, + 0, + 0, + NULL, + NULL, + 16, + 16, + 0xffff, + 0, + NULL, + 0, + 1, + 0, + 0, + 0, + v_APCI1500_Interrupt, + i_APCI1500_Reset, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI1500_ConfigDigitalInputEvent, + i_APCI1500_Initialisation, + i_APCI1500_StartStopInputEvent, + i_APCI1500_ReadMoreDigitalInput, + i_APCI1500_ConfigDigitalOutputErrorInterrupt, + i_APCI1500_WriteDigitalOutput, + i_APCI1500_ConfigureInterrupt, + NULL, + i_APCI1500_ConfigCounterTimerWatchdog, + i_APCI1500_StartStopTriggerTimerCounterWatchdog, + i_APCI1500_ReadInterruptMask, + i_APCI1500_ReadCounterTimerWatchdog, + NULL, + NULL, + NULL, + NULL}, +#endif +#ifdef CONFIG_APCI_3001 + {"apci3001", + APCI3120_BOARD_VENDOR_ID, + 0x828D, + AMCC_OP_REG_SIZE, + APCI3120_ADDRESS_RANGE, + 8, + 0, + ADDIDATA_NO_EEPROM, + NULL, + 16, + 8, + 16, + 0, + 0xfff, + 0, + &range_apci3120_ai, + NULL, + 4, + 4, + 0x0f, + 0, + NULL, + 1, + 1, + 1, + 10000, + 100000, + v_APCI3120_Interrupt, + i_APCI3120_Reset, + i_APCI3120_InsnConfigAnalogInput, + i_APCI3120_InsnReadAnalogInput, + NULL, + NULL, + i_APCI3120_CommandTestAnalogInput, + i_APCI3120_CommandAnalogInput, + i_APCI3120_StopCyclicAcquisition, + NULL, + NULL, + NULL, + NULL, + i_APCI3120_InsnReadDigitalInput, + NULL, + i_APCI3120_InsnBitsDigitalInput, + i_APCI3120_InsnConfigDigitalOutput, + i_APCI3120_InsnWriteDigitalOutput, + i_APCI3120_InsnBitsDigitalOutput, + NULL, + i_APCI3120_InsnConfigTimer, + i_APCI3120_InsnWriteTimer, + i_APCI3120_InsnReadTimer, + NULL, + NULL, + NULL, + NULL, + NULL}, +#endif +#ifdef CONFIG_APCI_3501 + {"apci3501", + APCI3501_BOARD_VENDOR_ID, + 0x3001, + 64, + APCI3501_ADDRESS_RANGE, + 0, + 0, + ADDIDATA_EEPROM, + ADDIDATA_S5933, + 0, + 0, + 0, + 8, + 0, + 16383, + NULL, + &range_apci3501_ao, + 2, + 2, + 0x3, + 0, + NULL, + 0, + 1, + 0, + 0, + 0, + v_APCI3501_Interrupt, + i_APCI3501_Reset, + NULL, NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3501_ConfigAnalogOutput, + i_APCI3501_WriteAnalogOutput, + NULL, + NULL, + NULL, + NULL, + i_APCI3501_ReadDigitalInput, + i_APCI3501_ConfigDigitalOutput, + i_APCI3501_WriteDigitalOutput, + i_APCI3501_ReadDigitalOutput, + NULL, + i_APCI3501_ConfigTimerCounterWatchdog, + i_APCI3501_StartStopWriteTimerCounterWatchdog, + i_APCI3501_ReadTimerCounterWatchdog, + NULL, + NULL, + NULL, + NULL, + NULL}, +#endif +#ifdef CONFIG_APCI_035 + {"apci035", + APCI035_BOARD_VENDOR_ID, + 0x0300, + 127, + APCI035_ADDRESS_RANGE, + 0, + 0, + 1, + ADDIDATA_S5920, + 16, + 8, + 16, + 0, + 0xff, + 0, + &range_apci035_ai, + NULL, + 0, + 0, + 0, + 0, + NULL, + 0, + 1, + 0, + 10000, + 100000, + v_APCI035_Interrupt, + i_APCI035_Reset, + i_APCI035_ConfigAnalogInput, + i_APCI035_ReadAnalogInput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI035_ConfigTimerWatchdog, + i_APCI035_StartStopWriteTimerWatchdog, + i_APCI035_ReadTimerWatchdog, + NULL, + NULL, + NULL, + NULL, + NULL}, +#endif +#ifdef CONFIG_APCI_3200 + {"apci3200", + APCI3200_BOARD_VENDOR_ID, + 0x3000, + 128, + 256, + 4, + 4, + ADDIDATA_EEPROM, + ADDIDATA_S5920, + 16, + 8, + 16, + 0, + 0x3ffff, + 0, + &range_apci3200_ai, + NULL, + 4, + 4, + 0, + 0, + NULL, + 0, + 0, + 0, + 10000, + 100000, + v_APCI3200_Interrupt, + i_APCI3200_Reset, + i_APCI3200_ConfigAnalogInput, + i_APCI3200_ReadAnalogInput, + i_APCI3200_InsnWriteReleaseAnalogInput, + i_APCI3200_InsnBits_AnalogInput_Test, + i_APCI3200_CommandTestAnalogInput, + i_APCI3200_CommandAnalogInput, + i_APCI3200_StopCyclicAcquisition, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3200_ReadDigitalInput, + i_APCI3200_ConfigDigitalOutput, + i_APCI3200_WriteDigitalOutput, + i_APCI3200_ReadDigitalOutput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL}, +#endif +#ifdef CONFIG_APCI_3300 + //Begin JK 20.10.2004: APCI-3300 integration + {"apci3300", + APCI3200_BOARD_VENDOR_ID, + 0x3007, + 128, + 256, + 4, + 4, + ADDIDATA_EEPROM, + ADDIDATA_S5920, + 0, + 8, + 8, + 0, + 0x3ffff, + 0, + &range_apci3300_ai, + NULL, + 4, + 4, + 0, + 0, + NULL, + 0, + 0, + 0, + 10000, + 100000, + v_APCI3200_Interrupt, + i_APCI3200_Reset, + i_APCI3200_ConfigAnalogInput, + i_APCI3200_ReadAnalogInput, + i_APCI3200_InsnWriteReleaseAnalogInput, + i_APCI3200_InsnBits_AnalogInput_Test, + i_APCI3200_CommandTestAnalogInput, + i_APCI3200_CommandAnalogInput, + i_APCI3200_StopCyclicAcquisition, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3200_ReadDigitalInput, + i_APCI3200_ConfigDigitalOutput, + i_APCI3200_WriteDigitalOutput, + i_APCI3200_ReadDigitalOutput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL}, +#endif +#ifdef CONFIG_APCI_1710 + {"apci1710", APCI1710_BOARD_VENDOR_ID, APCI1710_BOARD_DEVICE_ID, + 128, + 8, + 256, + 0, + ADDIDATA_NO_EEPROM, + NULL, + 0, + 0, + 0, + 0, + 0, + 0, + NULL, + NULL, + 0, + 0, + 0, + 0, + NULL, + 0, + 0, + 0, + 0, + 0, + v_APCI1710_Interrupt, + i_APCI1710_Reset, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL}, +#endif +#ifdef CONFIG_APCI_16XX + {"apci1648", + 0x15B8, + 0x1009, + 128, + 0, + 0, + 0, + ADDIDATA_NO_EEPROM, + NULL, + 0, + 0, + 0, + 0, + 0, + 0, + NULL, + NULL, + 0, + 0, + 0, + 48, + &range_apci16xx_ttl, + 0, + 0, + 0, + 0, + 0, + NULL, + i_APCI16XX_Reset, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI16XX_InsnConfigInitTTLIO, + i_APCI16XX_InsnBitsReadTTLIO, + i_APCI16XX_InsnReadTTLIOAllPortValue, + i_APCI16XX_InsnBitsWriteTTLIO}, + + {"apci1696", + 0x15B8, + 0x100A, + 128, + 0, + 0, + 0, + ADDIDATA_NO_EEPROM, + NULL, + 0, + 0, + 0, + 0, + 0, + 0, + NULL, + NULL, + 0, + 0, + 0, + 96, + &range_apci16xx_ttl, + 0, + 0, + 0, + 0, + 0, + NULL, + i_APCI16XX_Reset, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI16XX_InsnConfigInitTTLIO, + i_APCI16XX_InsnBitsReadTTLIO, + i_APCI16XX_InsnReadTTLIOAllPortValue, + i_APCI16XX_InsnBitsWriteTTLIO}, +#endif +#ifdef CONFIG_APCI_3XXX + {"apci3000-16", + 0x15B8, + 0x3010, + 256, + 256, + 256, + 256, + ADDIDATA_NO_EEPROM, + ADDIDATA_9054, + 16, + 8, + 16, + 0, + 4095, + 0, + &range_apci3XXX_ai, + NULL, + 0, + 0, + 0, + 24, + &range_apci3XXX_ttl, + 0, + 0, + 6, + 10000, + 0, + v_APCI3XXX_Interrupt, + i_APCI3XXX_Reset, + i_APCI3XXX_InsnConfigAnalogInput, + i_APCI3XXX_InsnReadAnalogInput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnConfigInitTTLIO, + i_APCI3XXX_InsnBitsTTLIO, + i_APCI3XXX_InsnReadTTLIO, + i_APCI3XXX_InsnWriteTTLIO}, + + {"apci3000-8", + 0x15B8, + 0x300F, + 256, + 256, + 256, + 256, + ADDIDATA_NO_EEPROM, + ADDIDATA_9054, + 8, + 4, + 8, + 0, + 4095, + 0, + &range_apci3XXX_ai, + NULL, + 0, + 0, + 0, + 24, + &range_apci3XXX_ttl, + 0, + 0, + 6, + 10000, + 0, + v_APCI3XXX_Interrupt, + i_APCI3XXX_Reset, + i_APCI3XXX_InsnConfigAnalogInput, + i_APCI3XXX_InsnReadAnalogInput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnConfigInitTTLIO, + i_APCI3XXX_InsnBitsTTLIO, + i_APCI3XXX_InsnReadTTLIO, + i_APCI3XXX_InsnWriteTTLIO}, + + {"apci3000-4", + 0x15B8, + 0x300E, + 256, + 256, + 256, + 256, + ADDIDATA_NO_EEPROM, + ADDIDATA_9054, + 4, + 2, + 4, + 0, + 4095, + 0, + &range_apci3XXX_ai, + NULL, + 0, + 0, + 0, + 24, + &range_apci3XXX_ttl, + 0, + 0, + 6, + 10000, + 0, + v_APCI3XXX_Interrupt, + i_APCI3XXX_Reset, + i_APCI3XXX_InsnConfigAnalogInput, + i_APCI3XXX_InsnReadAnalogInput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnConfigInitTTLIO, + i_APCI3XXX_InsnBitsTTLIO, + i_APCI3XXX_InsnReadTTLIO, + i_APCI3XXX_InsnWriteTTLIO}, + + {"apci3006-16", + 0x15B8, + 0x3013, + 256, + 256, + 256, + 256, + ADDIDATA_NO_EEPROM, + ADDIDATA_9054, + 16, + 8, + 16, + 0, + 65535, + 0, + &range_apci3XXX_ai, + NULL, + 0, + 0, + 0, + 24, + &range_apci3XXX_ttl, + 0, + 0, + 6, + 10000, + 0, + v_APCI3XXX_Interrupt, + i_APCI3XXX_Reset, + i_APCI3XXX_InsnConfigAnalogInput, + i_APCI3XXX_InsnReadAnalogInput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnConfigInitTTLIO, + i_APCI3XXX_InsnBitsTTLIO, + i_APCI3XXX_InsnReadTTLIO, + i_APCI3XXX_InsnWriteTTLIO}, + + {"apci3006-8", + 0x15B8, + 0x3014, + 256, + 256, + 256, + 256, + ADDIDATA_NO_EEPROM, + ADDIDATA_9054, + 8, + 4, + 8, + 0, + 65535, + 0, + &range_apci3XXX_ai, + NULL, + 0, + 0, + 0, + 24, + &range_apci3XXX_ttl, + 0, + 0, + 6, + 10000, + 0, + v_APCI3XXX_Interrupt, + i_APCI3XXX_Reset, + i_APCI3XXX_InsnConfigAnalogInput, + i_APCI3XXX_InsnReadAnalogInput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnConfigInitTTLIO, + i_APCI3XXX_InsnBitsTTLIO, + i_APCI3XXX_InsnReadTTLIO, + i_APCI3XXX_InsnWriteTTLIO}, + + {"apci3006-4", + 0x15B8, + 0x3015, + 256, + 256, + 256, + 256, + ADDIDATA_NO_EEPROM, + ADDIDATA_9054, + 4, + 2, + 4, + 0, + 65535, + 0, + &range_apci3XXX_ai, + NULL, + 0, + 0, + 0, + 24, + &range_apci3XXX_ttl, + 0, + 0, + 6, + 10000, + 0, + v_APCI3XXX_Interrupt, + i_APCI3XXX_Reset, + i_APCI3XXX_InsnConfigAnalogInput, + i_APCI3XXX_InsnReadAnalogInput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnConfigInitTTLIO, + i_APCI3XXX_InsnBitsTTLIO, + i_APCI3XXX_InsnReadTTLIO, + i_APCI3XXX_InsnWriteTTLIO}, + + {"apci3010-16", + 0x15B8, + 0x3016, + 256, + 256, + 256, + 256, + ADDIDATA_NO_EEPROM, + ADDIDATA_9054, + 16, + 8, + 16, + 0, + 4095, + 0, + &range_apci3XXX_ai, + NULL, + 4, + 4, + 1, + 24, + &range_apci3XXX_ttl, + 0, + 0, + 6, + 5000, + 0, + v_APCI3XXX_Interrupt, + i_APCI3XXX_Reset, + i_APCI3XXX_InsnConfigAnalogInput, + i_APCI3XXX_InsnReadAnalogInput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnReadDigitalInput, + NULL, + i_APCI3XXX_InsnBitsDigitalInput, + NULL, + i_APCI3XXX_InsnWriteDigitalOutput, + i_APCI3XXX_InsnBitsDigitalOutput, + i_APCI3XXX_InsnReadDigitalOutput, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnConfigInitTTLIO, + i_APCI3XXX_InsnBitsTTLIO, + i_APCI3XXX_InsnReadTTLIO, + i_APCI3XXX_InsnWriteTTLIO}, + + {"apci3010-8", + 0x15B8, + 0x3017, + 256, + 256, + 256, + 256, + ADDIDATA_NO_EEPROM, + ADDIDATA_9054, + 8, + 4, + 8, + 0, + 4095, + 0, + &range_apci3XXX_ai, + NULL, + 4, + 4, + 1, + 24, + &range_apci3XXX_ttl, + 0, + 0, + 6, + 5000, + 0, + v_APCI3XXX_Interrupt, + i_APCI3XXX_Reset, + i_APCI3XXX_InsnConfigAnalogInput, + i_APCI3XXX_InsnReadAnalogInput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnReadDigitalInput, + NULL, + i_APCI3XXX_InsnBitsDigitalInput, + NULL, + i_APCI3XXX_InsnWriteDigitalOutput, + i_APCI3XXX_InsnBitsDigitalOutput, + i_APCI3XXX_InsnReadDigitalOutput, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnConfigInitTTLIO, + i_APCI3XXX_InsnBitsTTLIO, + i_APCI3XXX_InsnReadTTLIO, + i_APCI3XXX_InsnWriteTTLIO}, + + {"apci3010-4", + 0x15B8, + 0x3018, + 256, + 256, + 256, + 256, + ADDIDATA_NO_EEPROM, + ADDIDATA_9054, + 4, + 2, + 4, + 0, + 4095, + 0, + &range_apci3XXX_ai, + NULL, + 4, + 4, + 1, + 24, + &range_apci3XXX_ttl, + 0, + 0, + 6, + 5000, + 0, + v_APCI3XXX_Interrupt, + i_APCI3XXX_Reset, + i_APCI3XXX_InsnConfigAnalogInput, + i_APCI3XXX_InsnReadAnalogInput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnReadDigitalInput, + NULL, + i_APCI3XXX_InsnBitsDigitalInput, + NULL, + i_APCI3XXX_InsnWriteDigitalOutput, + i_APCI3XXX_InsnBitsDigitalOutput, + i_APCI3XXX_InsnReadDigitalOutput, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnConfigInitTTLIO, + i_APCI3XXX_InsnBitsTTLIO, + i_APCI3XXX_InsnReadTTLIO, + i_APCI3XXX_InsnWriteTTLIO}, + + {"apci3016-16", + 0x15B8, + 0x3019, + 256, + 256, + 256, + 256, + ADDIDATA_NO_EEPROM, + ADDIDATA_9054, + 16, + 8, + 16, + 0, + 65535, + 0, + &range_apci3XXX_ai, + NULL, + 4, + 4, + 1, + 24, + &range_apci3XXX_ttl, + 0, + 0, + 6, + 5000, + 0, + v_APCI3XXX_Interrupt, + i_APCI3XXX_Reset, + i_APCI3XXX_InsnConfigAnalogInput, + i_APCI3XXX_InsnReadAnalogInput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnReadDigitalInput, + NULL, + i_APCI3XXX_InsnBitsDigitalInput, + NULL, + i_APCI3XXX_InsnWriteDigitalOutput, + i_APCI3XXX_InsnBitsDigitalOutput, + i_APCI3XXX_InsnReadDigitalOutput, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnConfigInitTTLIO, + i_APCI3XXX_InsnBitsTTLIO, + i_APCI3XXX_InsnReadTTLIO, + i_APCI3XXX_InsnWriteTTLIO}, + + {"apci3016-8", + 0x15B8, + 0x301A, + 256, + 256, + 256, + 256, + ADDIDATA_NO_EEPROM, + ADDIDATA_9054, + 8, + 4, + 8, + 0, + 65535, + 0, + &range_apci3XXX_ai, + NULL, + 4, + 4, + 1, + 24, + &range_apci3XXX_ttl, + 0, + 0, + 6, + 5000, + 0, + v_APCI3XXX_Interrupt, + i_APCI3XXX_Reset, + i_APCI3XXX_InsnConfigAnalogInput, + i_APCI3XXX_InsnReadAnalogInput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnReadDigitalInput, + NULL, + i_APCI3XXX_InsnBitsDigitalInput, + NULL, + i_APCI3XXX_InsnWriteDigitalOutput, + i_APCI3XXX_InsnBitsDigitalOutput, + i_APCI3XXX_InsnReadDigitalOutput, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnConfigInitTTLIO, + i_APCI3XXX_InsnBitsTTLIO, + i_APCI3XXX_InsnReadTTLIO, + i_APCI3XXX_InsnWriteTTLIO}, + + {"apci3016-4", + 0x15B8, + 0x301B, + 256, + 256, + 256, + 256, + ADDIDATA_NO_EEPROM, + ADDIDATA_9054, + 4, + 2, + 4, + 0, + 65535, + 0, + &range_apci3XXX_ai, + NULL, + 4, + 4, + 1, + 24, + &range_apci3XXX_ttl, + 0, + 0, + 6, + 5000, + 0, + v_APCI3XXX_Interrupt, + i_APCI3XXX_Reset, + i_APCI3XXX_InsnConfigAnalogInput, + i_APCI3XXX_InsnReadAnalogInput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnReadDigitalInput, + NULL, + i_APCI3XXX_InsnBitsDigitalInput, + NULL, + i_APCI3XXX_InsnWriteDigitalOutput, + i_APCI3XXX_InsnBitsDigitalOutput, + i_APCI3XXX_InsnReadDigitalOutput, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnConfigInitTTLIO, + i_APCI3XXX_InsnBitsTTLIO, + i_APCI3XXX_InsnReadTTLIO, + i_APCI3XXX_InsnWriteTTLIO}, + + {"apci3100-16-4", + 0x15B8, + 0x301C, + 256, + 256, + 256, + 256, + ADDIDATA_NO_EEPROM, + ADDIDATA_9054, + 16, + 8, + 16, + 4, + 4095, + 4095, + &range_apci3XXX_ai, + &range_apci3XXX_ao, + 0, + 0, + 0, + 24, + &range_apci3XXX_ttl, + 0, + 0, + 6, + 10000, + 0, + v_APCI3XXX_Interrupt, + i_APCI3XXX_Reset, + i_APCI3XXX_InsnConfigAnalogInput, + i_APCI3XXX_InsnReadAnalogInput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnWriteAnalogOutput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnConfigInitTTLIO, + i_APCI3XXX_InsnBitsTTLIO, + i_APCI3XXX_InsnReadTTLIO, + i_APCI3XXX_InsnWriteTTLIO}, + + {"apci3100-8-4", + 0x15B8, + 0x301D, + 256, + 256, + 256, + 256, + ADDIDATA_NO_EEPROM, + ADDIDATA_9054, + 8, + 4, + 8, + 4, + 4095, + 4095, + &range_apci3XXX_ai, + &range_apci3XXX_ao, + 0, + 0, + 0, + 24, + &range_apci3XXX_ttl, + 0, + 0, + 6, + 10000, + 0, + v_APCI3XXX_Interrupt, + i_APCI3XXX_Reset, + i_APCI3XXX_InsnConfigAnalogInput, + i_APCI3XXX_InsnReadAnalogInput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnWriteAnalogOutput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnConfigInitTTLIO, + i_APCI3XXX_InsnBitsTTLIO, + i_APCI3XXX_InsnReadTTLIO, + i_APCI3XXX_InsnWriteTTLIO}, + + {"apci3106-16-4", + 0x15B8, + 0x301E, + 256, + 256, + 256, + 256, + ADDIDATA_NO_EEPROM, + ADDIDATA_9054, + 16, + 8, + 16, + 4, + 65535, + 4095, + &range_apci3XXX_ai, + &range_apci3XXX_ao, + 0, + 0, + 0, + 24, + &range_apci3XXX_ttl, + 0, + 0, + 6, + 10000, + 0, + v_APCI3XXX_Interrupt, + i_APCI3XXX_Reset, + i_APCI3XXX_InsnConfigAnalogInput, + i_APCI3XXX_InsnReadAnalogInput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnWriteAnalogOutput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnConfigInitTTLIO, + i_APCI3XXX_InsnBitsTTLIO, + i_APCI3XXX_InsnReadTTLIO, + i_APCI3XXX_InsnWriteTTLIO}, + + {"apci3106-8-4", + 0x15B8, + 0x301F, + 256, + 256, + 256, + 256, + ADDIDATA_NO_EEPROM, + ADDIDATA_9054, + 8, + 4, + 8, + 4, + 65535, + 4095, + &range_apci3XXX_ai, + &range_apci3XXX_ao, + 0, + 0, + 0, + 24, + &range_apci3XXX_ttl, + 0, + 0, + 6, + 10000, + 0, + v_APCI3XXX_Interrupt, + i_APCI3XXX_Reset, + i_APCI3XXX_InsnConfigAnalogInput, + i_APCI3XXX_InsnReadAnalogInput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnWriteAnalogOutput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnConfigInitTTLIO, + i_APCI3XXX_InsnBitsTTLIO, + i_APCI3XXX_InsnReadTTLIO, + i_APCI3XXX_InsnWriteTTLIO}, + + {"apci3110-16-4", + 0x15B8, + 0x3020, + 256, + 256, + 256, + 256, + ADDIDATA_NO_EEPROM, + ADDIDATA_9054, + 16, + 8, + 16, + 4, + 4095, + 4095, + &range_apci3XXX_ai, + &range_apci3XXX_ao, + 4, + 4, + 1, + 24, + &range_apci3XXX_ttl, + 0, + 0, + 6, + 5000, + 0, + v_APCI3XXX_Interrupt, + i_APCI3XXX_Reset, + i_APCI3XXX_InsnConfigAnalogInput, + i_APCI3XXX_InsnReadAnalogInput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnWriteAnalogOutput, + NULL, + NULL, + i_APCI3XXX_InsnReadDigitalInput, + NULL, + i_APCI3XXX_InsnBitsDigitalInput, + NULL, + i_APCI3XXX_InsnWriteDigitalOutput, + i_APCI3XXX_InsnBitsDigitalOutput, + i_APCI3XXX_InsnReadDigitalOutput, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnConfigInitTTLIO, + i_APCI3XXX_InsnBitsTTLIO, + i_APCI3XXX_InsnReadTTLIO, + i_APCI3XXX_InsnWriteTTLIO}, + + {"apci3110-8-4", + 0x15B8, + 0x3021, + 256, + 256, + 256, + 256, + ADDIDATA_NO_EEPROM, + ADDIDATA_9054, + 8, + 4, + 8, + 4, + 4095, + 4095, + &range_apci3XXX_ai, + &range_apci3XXX_ao, + 4, + 4, + 1, + 24, + &range_apci3XXX_ttl, + 0, + 0, + 6, + 5000, + 0, + v_APCI3XXX_Interrupt, + i_APCI3XXX_Reset, + i_APCI3XXX_InsnConfigAnalogInput, + i_APCI3XXX_InsnReadAnalogInput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnWriteAnalogOutput, + NULL, + NULL, + i_APCI3XXX_InsnReadDigitalInput, + NULL, + i_APCI3XXX_InsnBitsDigitalInput, + NULL, + i_APCI3XXX_InsnWriteDigitalOutput, + i_APCI3XXX_InsnBitsDigitalOutput, + i_APCI3XXX_InsnReadDigitalOutput, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnConfigInitTTLIO, + i_APCI3XXX_InsnBitsTTLIO, + i_APCI3XXX_InsnReadTTLIO, + i_APCI3XXX_InsnWriteTTLIO}, + + {"apci3116-16-4", + 0x15B8, + 0x3022, + 256, + 256, + 256, + 256, + ADDIDATA_NO_EEPROM, + ADDIDATA_9054, + 16, + 8, + 16, + 4, + 65535, + 4095, + &range_apci3XXX_ai, + &range_apci3XXX_ao, + 4, + 4, + 1, + 24, + &range_apci3XXX_ttl, + 0, + 0, + 6, + 5000, + 0, + v_APCI3XXX_Interrupt, + i_APCI3XXX_Reset, + i_APCI3XXX_InsnConfigAnalogInput, + i_APCI3XXX_InsnReadAnalogInput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnWriteAnalogOutput, + NULL, + NULL, + i_APCI3XXX_InsnReadDigitalInput, + NULL, + i_APCI3XXX_InsnBitsDigitalInput, + NULL, + i_APCI3XXX_InsnWriteDigitalOutput, + i_APCI3XXX_InsnBitsDigitalOutput, + i_APCI3XXX_InsnReadDigitalOutput, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnConfigInitTTLIO, + i_APCI3XXX_InsnBitsTTLIO, + i_APCI3XXX_InsnReadTTLIO, + i_APCI3XXX_InsnWriteTTLIO}, + + {"apci3116-8-4", + 0x15B8, + 0x3023, + 256, + 256, + 256, + 256, + ADDIDATA_NO_EEPROM, + ADDIDATA_9054, + 8, + 4, + 8, + 4, + 65535, + 4095, + &range_apci3XXX_ai, + &range_apci3XXX_ao, + 4, + 4, + 1, + 24, + &range_apci3XXX_ttl, + 0, + 0, + 6, + 5000, + 0, + v_APCI3XXX_Interrupt, + i_APCI3XXX_Reset, + i_APCI3XXX_InsnConfigAnalogInput, + i_APCI3XXX_InsnReadAnalogInput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnWriteAnalogOutput, + NULL, + NULL, + i_APCI3XXX_InsnReadDigitalInput, + NULL, + i_APCI3XXX_InsnBitsDigitalInput, + NULL, + i_APCI3XXX_InsnWriteDigitalOutput, + i_APCI3XXX_InsnBitsDigitalOutput, + i_APCI3XXX_InsnReadDigitalOutput, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnConfigInitTTLIO, + i_APCI3XXX_InsnBitsTTLIO, + i_APCI3XXX_InsnReadTTLIO, + i_APCI3XXX_InsnWriteTTLIO}, + + {"apci3003", + 0x15B8, + 0x300B, + 256, + 256, + 256, + 256, + ADDIDATA_NO_EEPROM, + ADDIDATA_9054, + 0, + 4, + 4, + 0, + 65535, + 0, + &range_apci3XXX_ai, + NULL, + 4, + 4, + 1, + 0, + NULL, + 0, + 0, + 7, + 2500, + 0, + v_APCI3XXX_Interrupt, + i_APCI3XXX_Reset, + i_APCI3XXX_InsnConfigAnalogInput, + i_APCI3XXX_InsnReadAnalogInput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnReadDigitalInput, + NULL, + i_APCI3XXX_InsnBitsDigitalInput, + NULL, + i_APCI3XXX_InsnWriteDigitalOutput, + i_APCI3XXX_InsnBitsDigitalOutput, + i_APCI3XXX_InsnReadDigitalOutput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL}, + + {"apci3002-16", + 0x15B8, + 0x3002, + 256, + 256, + 256, + 256, + ADDIDATA_NO_EEPROM, + ADDIDATA_9054, + 0, + 16, + 16, + 0, + 65535, + 0, + &range_apci3XXX_ai, + NULL, + 4, + 4, + 1, + 0, + NULL, + 0, + 0, + 6, + 5000, + 0, + v_APCI3XXX_Interrupt, + i_APCI3XXX_Reset, + i_APCI3XXX_InsnConfigAnalogInput, + i_APCI3XXX_InsnReadAnalogInput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnReadDigitalInput, + NULL, + i_APCI3XXX_InsnBitsDigitalInput, + NULL, + i_APCI3XXX_InsnWriteDigitalOutput, + i_APCI3XXX_InsnBitsDigitalOutput, + i_APCI3XXX_InsnReadDigitalOutput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL}, + + {"apci3002-8", + 0x15B8, + 0x3003, + 256, + 256, + 256, + 256, + ADDIDATA_NO_EEPROM, + ADDIDATA_9054, + 0, + 8, + 8, + 0, + 65535, + 0, + &range_apci3XXX_ai, + NULL, + 4, + 4, + 1, + 0, + NULL, + 0, + 0, + 6, + 5000, + 0, + v_APCI3XXX_Interrupt, + i_APCI3XXX_Reset, + i_APCI3XXX_InsnConfigAnalogInput, + i_APCI3XXX_InsnReadAnalogInput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnReadDigitalInput, + NULL, + i_APCI3XXX_InsnBitsDigitalInput, + NULL, + i_APCI3XXX_InsnWriteDigitalOutput, + i_APCI3XXX_InsnBitsDigitalOutput, + i_APCI3XXX_InsnReadDigitalOutput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL}, + + {"apci3002-4", + 0x15B8, + 0x3004, + 256, + 256, + 256, + 256, + ADDIDATA_NO_EEPROM, + ADDIDATA_9054, + 0, + 4, + 4, + 0, + 65535, + 0, + &range_apci3XXX_ai, + NULL, + 4, + 4, + 1, + 0, + NULL, + 0, + 0, + 6, + 5000, + 0, + v_APCI3XXX_Interrupt, + i_APCI3XXX_Reset, + i_APCI3XXX_InsnConfigAnalogInput, + i_APCI3XXX_InsnReadAnalogInput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnReadDigitalInput, + NULL, + i_APCI3XXX_InsnBitsDigitalInput, + NULL, + i_APCI3XXX_InsnWriteDigitalOutput, + i_APCI3XXX_InsnBitsDigitalOutput, + i_APCI3XXX_InsnReadDigitalOutput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL}, + + {"apci3500", + 0x15B8, + 0x3024, + 256, + 256, + 256, + 256, + ADDIDATA_NO_EEPROM, + ADDIDATA_9054, + 0, + 0, + 0, + 4, + 0, + 4095, + NULL, + &range_apci3XXX_ao, + 0, + 0, + 0, + 24, + &range_apci3XXX_ttl, + 0, + 0, + 0, + 0, + 0, + v_APCI3XXX_Interrupt, + i_APCI3XXX_Reset, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnWriteAnalogOutput, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + NULL, + i_APCI3XXX_InsnConfigInitTTLIO, + i_APCI3XXX_InsnBitsTTLIO, + i_APCI3XXX_InsnReadTTLIO, + i_APCI3XXX_InsnWriteTTLIO}, +#endif +}; + +#define n_boardtypes (sizeof(boardtypes)/sizeof(boardtype)) + +comedi_driver driver_addi = { + driver_name:"addi_common", + module:THIS_MODULE, + attach:i_ADDI_Attach, + detach:i_ADDI_Detach, + num_names:n_boardtypes, + board_name:&boardtypes[0].pc_DriverName, + offset:sizeof(boardtype), +}; + +COMEDI_PCI_INITCLEANUP(driver_addi, addi_apci_tbl); + +/* ++----------------------------------------------------------------------------+ +| Function name :static int i_ADDI_Attach(comedi_device *dev, | +| comedi_devconfig *it) | +| | ++----------------------------------------------------------------------------+ +| Task :Detects the card. | +| Configure the driver for a particular board. | +| This function does all the initializations and memory | +| allocation of data structures for the driver. | ++----------------------------------------------------------------------------+ +| Input Parameters :comedi_device *dev | +| comedi_devconfig *it | +| | ++----------------------------------------------------------------------------+ +| Return Value : 0 | +| | ++----------------------------------------------------------------------------+ +*/ + +static int i_ADDI_Attach(comedi_device * dev, comedi_devconfig * it) +{ + comedi_subdevice *s; + int ret, pages, i, n_subdevices; + DWORD dw_Dummy; + resource_size_t io_addr[5]; + unsigned int irq; + resource_size_t iobase_a, iobase_main, iobase_addon, iobase_reserved; + struct pcilst_struct *card = NULL; + unsigned char pci_bus, pci_slot, pci_func; + int i_Dma = 0; + static char c_Identifier[150]; + + sprintf(c_Identifier, "Addi-Data GmbH Comedi %s", + this_board->pc_DriverName); + + if ((ret = alloc_private(dev, sizeof(addi_private))) < 0) { + return -ENOMEM; + } + + if (!pci_list_builded) { + v_pci_card_list_init(this_board->i_VendorId, 1); //1 for displaying the list.. + pci_list_builded = 1; + } + //rt_printk("comedi%d: addi_common: board=%s",dev->minor,this_board->pc_DriverName); + + if ((this_board->i_Dma) && (it->options[2] == 0)) { + i_Dma = 1; + } + + if ((card = ptr_select_and_alloc_pci_card(this_board->i_VendorId, + this_board->i_DeviceId, + it->options[0], + it->options[1], i_Dma)) == NULL) { + return -EIO; + } + devpriv->allocated = 1; + + if ((i_pci_card_data(card, &pci_bus, &pci_slot, &pci_func, &io_addr[0], + &irq)) < 0) { + i_pci_card_free(card); + printk(" - Can't get AMCC data!\n"); + return -EIO; + } + + iobase_a = io_addr[0]; + iobase_main = io_addr[1]; + iobase_addon = io_addr[2]; + iobase_reserved = io_addr[3]; + printk("\nBus %d: Slot %d: Funct%d\nBase0: 0x%8llx\nBase1: 0x%8llx\nBase2: 0x%8llx\nBase3: 0x%8llx\n", pci_bus, pci_slot, pci_func, (unsigned long long)io_addr[0], (unsigned long long)io_addr[1], (unsigned long long)io_addr[2], (unsigned long long)io_addr[3]); + + if ((this_board->pc_EepromChip == NULL) + || (strcmp(this_board->pc_EepromChip, ADDIDATA_9054) != 0)) { + /************************************/ + /* Test if more that 1 address used */ + /************************************/ + + if (this_board->i_IorangeBase1 != 0) { + dev->iobase = (unsigned long)iobase_main; // DAQ base address... + } else { + dev->iobase = (unsigned long)iobase_a; // DAQ base address... + } + + dev->board_name = this_board->pc_DriverName; + devpriv->amcc = card; + devpriv->iobase = (INT) dev->iobase; + devpriv->i_IobaseAmcc = (INT) iobase_a; //AMCC base address... + devpriv->i_IobaseAddon = (INT) iobase_addon; //ADD ON base address.... + devpriv->i_IobaseReserved = (INT) iobase_reserved; + devpriv->ps_BoardInfo = this_board; + } else { + dev->board_name = this_board->pc_DriverName; + dev->iobase = (unsigned long)io_addr[2]; + devpriv->amcc = card; + devpriv->iobase = (INT) io_addr[2]; + devpriv->ps_BoardInfo = this_board; + devpriv->i_IobaseReserved = (INT) io_addr[3]; + printk("\nioremap begin"); + devpriv->dw_AiBase = + (ULONG_PTR) ioremap(io_addr[3], + this_board->i_IorangeBase3); + printk("\nioremap end"); + } + + //## + + if (irq > 0) { + if (comedi_request_irq(irq, v_ADDI_Interrupt, IRQF_SHARED, + c_Identifier, dev) < 0) { + printk(", unable to allocate IRQ %u, DISABLING IT", + irq); + irq = 0; /* Can't use IRQ */ + } else { + rt_printk("\nirq=%u", irq); + } + } else { + rt_printk(", IRQ disabled"); + } + + printk("\nOption %d %d %d\n", it->options[0], it->options[1], + it->options[2]); + dev->irq = irq; + + // Read eepeom and fill boardtype Structure + + if (this_board->i_PCIEeprom) { + printk("\nPCI Eeprom used"); + if (!(strcmp(this_board->pc_EepromChip, "S5920"))) { + // Set 3 wait stait + if (!(strcmp(this_board->pc_DriverName, "apci035"))) { + outl(0x80808082, devpriv->i_IobaseAmcc + 0x60); + } else { + outl(0x83838383, devpriv->i_IobaseAmcc + 0x60); + } + // Enable the interrupt for the controler + dw_Dummy = inl(devpriv->i_IobaseAmcc + 0x38); + outl(dw_Dummy | 0x2000, devpriv->i_IobaseAmcc + 0x38); + printk("\nEnable the interrupt for the controler"); + } + printk("\nRead Eeprom"); + i_EepromReadMainHeader(io_addr[0], this_board->pc_EepromChip, + dev); + } else { + printk("\nPCI Eeprom unused"); + } + + if (it->options[2] > 0) { + devpriv->us_UseDma = ADDI_DISABLE; + } else { + devpriv->us_UseDma = ADDI_ENABLE; + } + + if (this_board->i_Dma) { + printk("\nDMA used"); + if (devpriv->us_UseDma == ADDI_ENABLE) { + // alloc DMA buffers + devpriv->b_DmaDoubleBuffer = 0; + for (i = 0; i < 2; i++) { + for (pages = 4; pages >= 0; pages--) { + if ((devpriv->ul_DmaBufferVirtual[i] = + (void *) + __get_free_pages + (GFP_KERNEL, pages))) { + break; + } + } + if (devpriv->ul_DmaBufferVirtual[i]) { + devpriv->ui_DmaBufferPages[i] = pages; + devpriv->ui_DmaBufferSize[i] = + PAGE_SIZE * pages; + devpriv->ui_DmaBufferSamples[i] = + devpriv-> + ui_DmaBufferSize[i] >> 1; + devpriv->ul_DmaBufferHw[i] = + virt_to_bus((void *)devpriv-> + ul_DmaBufferVirtual[i]); + } + } + if (!devpriv->ul_DmaBufferVirtual[0]) { + rt_printk + (", Can't allocate DMA buffer, DMA disabled!"); + devpriv->us_UseDma = ADDI_DISABLE; + } + + if (devpriv->ul_DmaBufferVirtual[1]) { + devpriv->b_DmaDoubleBuffer = 1; + } + } + + if ((devpriv->us_UseDma == ADDI_ENABLE)) { + rt_printk("\nDMA ENABLED\n"); + } else { + printk("\nDMA DISABLED\n"); + } + } + + if (!strcmp(this_board->pc_DriverName, "apci1710")) { +#ifdef CONFIG_APCI_1710 + i_ADDI_AttachPCI1710(dev); + + // save base address + devpriv->s_BoardInfos.ui_Address = io_addr[2]; +#endif + } else { + //Update-0.7.57->0.7.68dev->n_subdevices = 7; + n_subdevices = 7; + if ((ret = alloc_subdevices(dev, n_subdevices)) < 0) + return ret; + + // Allocate and Initialise AI Subdevice Structures + s = dev->subdevices + 0; + if ((this_board->i_NbrAiChannel) + || (this_board->i_NbrAiChannelDiff)) { + dev->read_subdev = s; + s->type = COMEDI_SUBD_AI; + s->subdev_flags = + SDF_READABLE | SDF_RT | SDF_COMMON | SDF_GROUND + | SDF_DIFF; + if (this_board->i_NbrAiChannel) { + s->n_chan = this_board->i_NbrAiChannel; + devpriv->b_SingelDiff = 0; + } else { + s->n_chan = this_board->i_NbrAiChannelDiff; + devpriv->b_SingelDiff = 1; + } + s->maxdata = this_board->i_AiMaxdata; + s->len_chanlist = this_board->i_AiChannelList; + s->range_table = this_board->pr_AiRangelist; + + /* Set the initialisation flag */ + devpriv->b_AiInitialisation = 1; + + s->insn_config = + this_board->i_hwdrv_InsnConfigAnalogInput; + s->insn_read = this_board->i_hwdrv_InsnReadAnalogInput; + s->insn_write = + this_board->i_hwdrv_InsnWriteAnalogInput; + s->insn_bits = this_board->i_hwdrv_InsnBitsAnalogInput; + s->do_cmdtest = + this_board->i_hwdrv_CommandTestAnalogInput; + s->do_cmd = this_board->i_hwdrv_CommandAnalogInput; + s->cancel = this_board->i_hwdrv_CancelAnalogInput; + + } else { + s->type = COMEDI_SUBD_UNUSED; + } + + // Allocate and Initialise AO Subdevice Structures + s = dev->subdevices + 1; + if (this_board->i_NbrAoChannel) { + s->type = COMEDI_SUBD_AO; + s->subdev_flags = + SDF_WRITEABLE | SDF_GROUND | SDF_COMMON | + SDF_RT; + s->n_chan = this_board->i_NbrAoChannel; + s->maxdata = this_board->i_AoMaxdata; + s->len_chanlist = this_board->i_NbrAoChannel; + s->range_table = this_board->pr_AoRangelist; + s->insn_config = + this_board->i_hwdrv_InsnConfigAnalogOutput; + s->insn_write = + this_board->i_hwdrv_InsnWriteAnalogOutput; + } else { + s->type = COMEDI_SUBD_UNUSED; + } + // Allocate and Initialise DI Subdevice Structures + s = dev->subdevices + 2; + if (this_board->i_NbrDiChannel) { + s->type = COMEDI_SUBD_DI; + s->subdev_flags = + SDF_READABLE | SDF_RT | SDF_GROUND | SDF_COMMON; + s->n_chan = this_board->i_NbrDiChannel; + s->maxdata = 1; + s->len_chanlist = this_board->i_NbrDiChannel; + s->range_table = &range_digital; + s->io_bits = 0; /* all bits input */ + s->insn_config = + this_board->i_hwdrv_InsnConfigDigitalInput; + s->insn_read = this_board->i_hwdrv_InsnReadDigitalInput; + s->insn_write = + this_board->i_hwdrv_InsnWriteDigitalInput; + s->insn_bits = this_board->i_hwdrv_InsnBitsDigitalInput; + } else { + s->type = COMEDI_SUBD_UNUSED; + } + // Allocate and Initialise DO Subdevice Structures + s = dev->subdevices + 3; + if (this_board->i_NbrDoChannel) { + s->type = COMEDI_SUBD_DO; + s->subdev_flags = + SDF_READABLE | SDF_WRITEABLE | SDF_RT | + SDF_GROUND | SDF_COMMON; + s->n_chan = this_board->i_NbrDoChannel; + s->maxdata = this_board->i_DoMaxdata; + s->len_chanlist = this_board->i_NbrDoChannel; + s->range_table = &range_digital; + s->io_bits = 0xf; /* all bits output */ + + s->insn_config = this_board->i_hwdrv_InsnConfigDigitalOutput; //for digital output memory.. + s->insn_write = + this_board->i_hwdrv_InsnWriteDigitalOutput; + s->insn_bits = + this_board->i_hwdrv_InsnBitsDigitalOutput; + s->insn_read = + this_board->i_hwdrv_InsnReadDigitalOutput; + } else { + s->type = COMEDI_SUBD_UNUSED; + } + + // Allocate and Initialise Timer Subdevice Structures + s = dev->subdevices + 4; + if (this_board->i_Timer) { + s->type = COMEDI_SUBD_TIMER; + s->subdev_flags = + SDF_WRITEABLE | SDF_RT | SDF_GROUND | + SDF_COMMON; + s->n_chan = 1; + s->maxdata = 0; + s->len_chanlist = 1; + s->range_table = &range_digital; + + s->insn_write = this_board->i_hwdrv_InsnWriteTimer; + s->insn_read = this_board->i_hwdrv_InsnReadTimer; + s->insn_config = this_board->i_hwdrv_InsnConfigTimer; + s->insn_bits = this_board->i_hwdrv_InsnBitsTimer; + } else { + s->type = COMEDI_SUBD_UNUSED; + } + + // Allocate and Initialise TTL + s = dev->subdevices + 5; + if (this_board->i_NbrTTLChannel) { + s->type = COMEDI_SUBD_TTLIO; + s->subdev_flags = + SDF_WRITEABLE | SDF_READABLE | SDF_RT | + SDF_GROUND | SDF_COMMON; + s->n_chan = this_board->i_NbrTTLChannel; + s->maxdata = 1; + s->io_bits = 0; /* all bits input */ + s->len_chanlist = this_board->i_NbrTTLChannel; + s->range_table = &range_digital; + s->insn_config = this_board->i_hwdr_ConfigInitTTLIO; + s->insn_bits = this_board->i_hwdr_ReadTTLIOBits; + s->insn_read = this_board->i_hwdr_ReadTTLIOAllPortValue; + s->insn_write = this_board->i_hwdr_WriteTTLIOChlOnOff; + } else { + s->type = COMEDI_SUBD_UNUSED; + } + + /* EEPROM */ + s = dev->subdevices + 6; + if (this_board->i_PCIEeprom) { + s->type = COMEDI_SUBD_MEMORY; + s->subdev_flags = SDF_READABLE | SDF_INTERNAL; + s->n_chan = 256; + s->maxdata = 0xffff; + s->insn_read = i_ADDIDATA_InsnReadEeprom; + } else { + s->type = COMEDI_SUBD_UNUSED; + } + } + + printk("\ni_ADDI_Attach end\n"); + i_ADDI_Reset(dev); + devpriv->b_ValidDriver = 1; + return 0; +} + +/* ++----------------------------------------------------------------------------+ +| Function name : static int i_ADDI_Detach(comedi_device *dev) | +| | +| | ++----------------------------------------------------------------------------+ +| Task : Deallocates resources of the addi_common driver | +| Free the DMA buffers, unregister irq. | +| | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev | +| | +| | ++----------------------------------------------------------------------------+ +| Return Value : 0 | +| | ++----------------------------------------------------------------------------+ +*/ + +static int i_ADDI_Detach(comedi_device * dev) +{ + + if (dev->private) { + if (devpriv->b_ValidDriver) { + i_ADDI_Reset(dev); + } + + if (dev->irq) { + comedi_free_irq(dev->irq, dev); + } + + if ((devpriv->ps_BoardInfo->pc_EepromChip == NULL) + || (strcmp(devpriv->ps_BoardInfo->pc_EepromChip, + ADDIDATA_9054) != 0)) { + if (devpriv->allocated) { + i_pci_card_free(devpriv->amcc); + } + + if (devpriv->ul_DmaBufferVirtual[0]) { + free_pages((unsigned long)devpriv-> + ul_DmaBufferVirtual[0], + devpriv->ui_DmaBufferPages[0]); + } + + if (devpriv->ul_DmaBufferVirtual[1]) { + free_pages((unsigned long)devpriv-> + ul_DmaBufferVirtual[1], + devpriv->ui_DmaBufferPages[1]); + } + } else { + iounmap((void *)devpriv->dw_AiBase); + + if (devpriv->allocated) { + i_pci_card_free(devpriv->amcc); + } + } + + if (pci_list_builded) { + //v_pci_card_list_cleanup(PCI_VENDOR_ID_AMCC); + v_pci_card_list_cleanup(this_board->i_VendorId); + pci_list_builded = 0; + } + } + + return 0; +} + +/* ++----------------------------------------------------------------------------+ +| Function name : static int i_ADDI_Reset(comedi_device *dev) | +| | ++----------------------------------------------------------------------------+ +| Task : Disables all interrupts, Resets digital output to low, | +| Set all analog output to low | +| | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev | +| | +| | ++----------------------------------------------------------------------------+ +| Return Value : 0 | +| | ++----------------------------------------------------------------------------+ +*/ + +static int i_ADDI_Reset(comedi_device * dev) +{ + + this_board->i_hwdrv_Reset(dev); + return 0; +} + +// Interrupt function +/* ++----------------------------------------------------------------------------+ +| Function name : | +|static void v_ADDI_Interrupt(int irq, void *d PT_REGS_ARG) | +| | ++----------------------------------------------------------------------------+ +| Task : Registerd interrupt routine | +| | ++----------------------------------------------------------------------------+ +| Input Parameters : int irq | +| | +| | ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ + +static irqreturn_t v_ADDI_Interrupt(int irq, void *d PT_REGS_ARG) +{ + comedi_device *dev = d; + this_board->v_hwdrv_Interrupt(irq, d); + return IRQ_RETVAL(1); +} + +// EEPROM Read Function +/* ++----------------------------------------------------------------------------+ +| Function name : | +|INT i_ADDIDATA_InsnReadEeprom(comedi_device *dev,comedi_subdevice *s, + comedi_insn *insn,lsampl_t *data) +| | ++----------------------------------------------------------------------------+ +| Task : Read 256 words from EEPROM | +| | ++----------------------------------------------------------------------------+ +| Input Parameters :(comedi_device *dev,comedi_subdevice *s, + comedi_insn *insn,lsampl_t *data) | +| | +| | ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ + +static int i_ADDIDATA_InsnReadEeprom(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + WORD w_Data; + WORD w_Address; + w_Address = CR_CHAN(insn->chanspec); // address to be read as 0,1,2,3...255 + + w_Data = w_EepromReadWord(devpriv->i_IobaseAmcc, + this_board->pc_EepromChip, 0x100 + (2 * w_Address)); + data[0] = w_Data; + //multiplied by 2 bcozinput will be like 0,1,2...255 + return insn->n; + +} --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/addi_common.h @@ -0,0 +1,482 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstrasse 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-----------------------------------------------------------------------+ + | Project : ADDI-DATA | Compiler : GCC | + | Modulname : addi_common.h | Version : 2.96 | + +-------------------------------+---------------------------------------+ + | Project manager: Eric Stolz | Date : 02/12/2002 | + +-----------------------------------------------------------------------+ + | Description : ADDI COMMON Header File | + +-----------------------------------------------------------------------+ +*/ + +//including header files + +#include +#include +#include +#include +//#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "../../comedidev.h" +#include "addi_amcc_s5933.h" +#include +#include + +#define ERROR -1 +#define SUCCESS 1 + +// variable type definition + +typedef void VOID, *PVOID; +typedef char CHAR, *PCHAR; +typedef const CHAR *PCSTR; +typedef unsigned char BYTE, *PBYTE; +typedef short SHORT, *PSHORT; +typedef unsigned short USHORT, *PUSHORT; +typedef unsigned short WORD, *PWORD; +typedef int INT, *PINT;; +typedef unsigned int UINT, *PUINT; +typedef int LONG, *PLONG; /* 32-bit */ +typedef unsigned int ULONG, *PULONG; /* 32-bit */ +typedef unsigned int DWORD, *PDWORD; /* 32-bit */ +typedef unsigned long ULONG_PTR; + +typedef const comedi_lrange *PCRANGE; +#define LOBYTE(W) (BYTE )((W)&0xFF) +#define HIBYTE(W) (BYTE )(((W)>>8)&0xFF) +#define MAKEWORD(H,L) (USHORT )((L)|( (H)<<8) ) +#define LOWORD(W) (USHORT )((W)&0xFFFF) +#define HIWORD(W) (USHORT )(((W)>>16)&0xFFFF) +#define MAKEDWORD(H,L) (UINT )((L)|( (H)<<16) ) + +#define ADDI_ENABLE 1 +#define ADDI_DISABLE 0 +#define APCI1710_SAVE_INTERRUPT 1 + +#define ADDIDATA_EEPROM 1 +#define ADDIDATA_NO_EEPROM 0 +#define ADDIDATA_93C76 "93C76" +#define ADDIDATA_S5920 "S5920" +#define ADDIDATA_S5933 "S5933" +#define ADDIDATA_9054 "9054" + +//ADDIDATA Enable Disable +#define ADDIDATA_ENABLE 1 +#define ADDIDATA_DISABLE 0 + +// Structures +// structure for the boardtype +typedef struct { + + PCSTR pc_DriverName; // driver name + INT i_VendorId; //PCI vendor a device ID of card + INT i_DeviceId; + INT i_IorangeBase0; + INT i_IorangeBase1; + INT i_IorangeBase2; // base 2 range + INT i_IorangeBase3; // base 3 range + INT i_PCIEeprom; // eeprom present or not + PCHAR pc_EepromChip; // type of chip + INT i_NbrAiChannel; // num of A/D chans + INT i_NbrAiChannelDiff; // num of A/D chans in diff mode + INT i_AiChannelList; // len of chanlist + INT i_NbrAoChannel; // num of D/A chans + INT i_AiMaxdata; // resolution of A/D + INT i_AoMaxdata; // resolution of D/A + PCRANGE pr_AiRangelist; // rangelist for A/D + PCRANGE pr_AoRangelist; // rangelist for D/A + + INT i_NbrDiChannel; // Number of DI channels + INT i_NbrDoChannel; // Number of DO channels + INT i_DoMaxdata; // data to set all chanels high + + INT i_NbrTTLChannel; // Number of TTL channels + PCRANGE pr_TTLRangelist; // rangelist for TTL + + INT i_Dma; // dma present or not + INT i_Timer; // timer subdevice present or not + BYTE b_AvailableConvertUnit; + UINT ui_MinAcquisitiontimeNs; // Minimum Acquisition in Nano secs + UINT ui_MinDelaytimeNs; // Minimum Delay in Nano secs + +// interrupt and reset + void (*v_hwdrv_Interrupt) (int irq, void *d); + int (*i_hwdrv_Reset) (comedi_device * dev); + +//Subdevice functions +//ANALOG INPUT + + int (*i_hwdrv_InsnConfigAnalogInput) (comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + int (*i_hwdrv_InsnReadAnalogInput) (comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + int (*i_hwdrv_InsnWriteAnalogInput) (comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + int (*i_hwdrv_InsnBitsAnalogInput) (comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + int (*i_hwdrv_CommandTestAnalogInput) (comedi_device * dev, + comedi_subdevice * s, comedi_cmd * cmd); + int (*i_hwdrv_CommandAnalogInput) (comedi_device * dev, + comedi_subdevice * s); + int (*i_hwdrv_CancelAnalogInput) (comedi_device * dev, + comedi_subdevice * s); + +//Analog Output + int (*i_hwdrv_InsnConfigAnalogOutput) (comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + int (*i_hwdrv_InsnWriteAnalogOutput) (comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + int (*i_hwdrv_InsnBitsAnalogOutput) (comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + +//Digital Input + int (*i_hwdrv_InsnConfigDigitalInput) (comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + int (*i_hwdrv_InsnReadDigitalInput) (comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + int (*i_hwdrv_InsnWriteDigitalInput) (comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + int (*i_hwdrv_InsnBitsDigitalInput) (comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + +//Digital Output + int (*i_hwdrv_InsnConfigDigitalOutput) (comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + int (*i_hwdrv_InsnWriteDigitalOutput) (comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + int (*i_hwdrv_InsnBitsDigitalOutput) (comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + int (*i_hwdrv_InsnReadDigitalOutput) (comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + +//TIMER + int (*i_hwdrv_InsnConfigTimer) (comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + int (*i_hwdrv_InsnWriteTimer) (comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + int (*i_hwdrv_InsnReadTimer) (comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + int (*i_hwdrv_InsnBitsTimer) (comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +//TTL IO + int (*i_hwdr_ConfigInitTTLIO) (comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + int (*i_hwdr_ReadTTLIOBits) (comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + int (*i_hwdr_ReadTTLIOAllPortValue) (comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + int (*i_hwdr_WriteTTLIOChlOnOff) (comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); +} boardtype; + +//MODULE INFO STRUCTURE + +typedef union { + /*****************************/ + /* Incremental counter infos */ + /*****************************/ + + struct { + union { + struct { + BYTE b_ModeRegister1; + BYTE b_ModeRegister2; + BYTE b_ModeRegister3; + BYTE b_ModeRegister4; + } s_ByteModeRegister; + DWORD dw_ModeRegister1_2_3_4; + } s_ModeRegister; + + struct { + unsigned int b_IndexInit:1; + unsigned int b_CounterInit:1; + unsigned int b_ReferenceInit:1; + unsigned int b_IndexInterruptOccur:1; + unsigned int b_CompareLogicInit:1; + unsigned int b_FrequencyMeasurementInit:1; + unsigned int b_FrequencyMeasurementEnable:1; + } s_InitFlag; + + } s_SiemensCounterInfo; + + /*************/ + /* SSI infos */ + /*************/ + + struct { + BYTE b_SSIProfile; + BYTE b_PositionTurnLength; + BYTE b_TurnCptLength; + BYTE b_SSIInit; + } s_SSICounterInfo; + + /*****************/ + /* TTL I/O infos */ + /*****************/ + + struct { + BYTE b_TTLInit; + BYTE b_PortConfiguration[4]; + } s_TTLIOInfo; + + /*********************/ + /* Digital I/O infos */ + /*********************/ + + struct { + BYTE b_DigitalInit; + BYTE b_ChannelAMode; + BYTE b_ChannelBMode; + BYTE b_OutputMemoryEnabled; + DWORD dw_OutputMemory; + } s_DigitalIOInfo; + + /*********************/ + /* 82X54 timer infos */ + /*********************/ + + struct { + struct { + BYTE b_82X54Init; + BYTE b_InputClockSelection; + BYTE b_InputClockLevel; + BYTE b_OutputLevel; + BYTE b_HardwareGateLevel; + DWORD dw_ConfigurationWord; + } s_82X54TimerInfo[3]; + BYTE b_InterruptMask; + } s_82X54ModuleInfo; + + /*********************/ + /* Chronometer infos */ + /*********************/ + + struct { + BYTE b_ChronoInit; + BYTE b_InterruptMask; + BYTE b_PCIInputClock; + BYTE b_TimingUnit; + BYTE b_CycleMode; + double d_TimingInterval; + DWORD dw_ConfigReg; + } s_ChronoModuleInfo; + + /***********************/ + /* Pulse encoder infos */ + /***********************/ + + struct { + struct { + BYTE b_PulseEncoderInit; + } s_PulseEncoderInfo[4]; + DWORD dw_SetRegister; + DWORD dw_ControlRegister; + DWORD dw_StatusRegister; + } s_PulseEncoderModuleInfo; + + /********************/ + /* Tor conter infos */ + /********************/ + + struct { + struct { + BYTE b_TorCounterInit; + BYTE b_TimingUnit; + BYTE b_InterruptEnable; + double d_TimingInterval; + ULONG ul_RealTimingInterval; + } s_TorCounterInfo[2]; + BYTE b_PCIInputClock; + } s_TorCounterModuleInfo; + + /*************/ + /* PWM infos */ + /*************/ + + struct { + struct { + BYTE b_PWMInit; + BYTE b_TimingUnit; + BYTE b_InterruptEnable; + double d_LowTiming; + double d_HighTiming; + ULONG ul_RealLowTiming; + ULONG ul_RealHighTiming; + } s_PWMInfo[2]; + BYTE b_ClockSelection; + } s_PWMModuleInfo; + + /*************/ + /* ETM infos */ + /*************/ + + struct { + struct { + BYTE b_ETMEnable; + BYTE b_ETMInterrupt; + } s_ETMInfo[2]; + BYTE b_ETMInit; + BYTE b_TimingUnit; + BYTE b_ClockSelection; + double d_TimingInterval; + ULONG ul_Timing; + } s_ETMModuleInfo; + + /*************/ + /* CDA infos */ + /*************/ + + struct { + BYTE b_CDAEnable; + BYTE b_CDAInterrupt; + BYTE b_CDAInit; + BYTE b_FctSelection; + BYTE b_CDAReadFIFOOverflow; + } s_CDAModuleInfo; + +} str_ModuleInfo; +// Private structure for the addi_apci3120 driver + +typedef struct { + + INT iobase; + INT i_IobaseAmcc; // base+size for AMCC chip + INT i_IobaseAddon; //addon base address + INT i_IobaseReserved; + ULONG_PTR dw_AiBase; + struct pcilst_struct *amcc; // ptr too AMCC data + BYTE allocated; // we have blocked card + BYTE b_ValidDriver; // driver is ok + BYTE b_AiContinuous; // we do unlimited AI + BYTE b_AiInitialisation; + UINT ui_AiActualScan; //how many scans we finished + UINT ui_AiBufferPtr; // data buffer ptr in samples + UINT ui_AiNbrofChannels; // how many channels is measured + UINT ui_AiScanLength; // Length of actual scanlist + UINT ui_AiActualScanPosition; // position in actual scan + PUINT pui_AiChannelList; // actual chanlist + UINT ui_AiChannelList[32]; // actual chanlist + BYTE b_AiChannelConfiguration[32]; // actual chanlist + UINT ui_AiReadData[32]; + DWORD dw_AiInitialised; + UINT ui_AiTimer0; //Timer Constant for Timer0 + UINT ui_AiTimer1; //Timer constant for Timer1 + UINT ui_AiFlags; + UINT ui_AiDataLength; + sampl_t *AiData; // Pointer to sample data + UINT ui_AiNbrofScans; // number of scans to do + USHORT us_UseDma; // To use Dma or not + BYTE b_DmaDoubleBuffer; // we can use double buffering + UINT ui_DmaActualBuffer; // which buffer is used now + //*UPDATE-0.7.57->0.7.68 + //ULONG ul_DmaBufferVirtual[2];// pointers to begin of DMA buffer + sampl_t *ul_DmaBufferVirtual[2]; // pointers to begin of DMA buffer + ULONG ul_DmaBufferHw[2]; // hw address of DMA buff + UINT ui_DmaBufferSize[2]; // size of dma buffer in bytes + UINT ui_DmaBufferUsesize[2]; // which size we may now used for transfer + UINT ui_DmaBufferSamples[2]; // size in samples + UINT ui_DmaBufferPages[2]; // number of pages in buffer + BYTE b_DigitalOutputRegister; // Digital Output Register + BYTE b_OutputMemoryStatus; + BYTE b_AnalogInputChannelNbr; // Analog input channel Nbr + BYTE b_AnalogOutputChannelNbr; // Analog input Output Nbr + BYTE b_TimerSelectMode; // Contain data written at iobase + 0C + BYTE b_ModeSelectRegister; // Contain data written at iobase + 0E + USHORT us_OutputRegister; // Contain data written at iobase + 0 + BYTE b_InterruptState; + BYTE b_TimerInit; // Specify if InitTimerWatchdog was load + BYTE b_TimerStarted; // Specify if timer 2 is running or not + BYTE b_Timer2Mode; // Specify the timer 2 mode + BYTE b_Timer2Interrupt; //Timer2 interrupt enable or disable + BYTE b_AiCyclicAcquisition; // indicate cyclic acquisition + BYTE b_InterruptMode; // eoc eos or dma + BYTE b_EocEosInterrupt; // Enable disable eoc eos interrupt + UINT ui_EocEosConversionTime; + BYTE b_EocEosConversionTimeBase; + BYTE b_SingelDiff; + BYTE b_ExttrigEnable; // To enable or disable external trigger + + struct task_struct *tsk_Current; // Pointer to the current process + boardtype *ps_BoardInfo; + + // Hardware board infos for 1710 + + struct { + UINT ui_Address; // Board address + UINT ui_FlashAddress; + BYTE b_InterruptNbr; // Board interrupt number + BYTE b_SlotNumber; // PCI slot number + BYTE b_BoardVersion; + DWORD dw_MolduleConfiguration[4]; // Module configuration + } s_BoardInfos; + + /*******************/ + /* Interrupt infos */ + /*******************/ + + struct { + ULONG ul_InterruptOccur; /* 0 : No interrupt occur */ + /* > 0 : Interrupt occur */ + UINT ui_Read; /* Read FIFO */ + UINT ui_Write; /* Write FIFO */ + struct { + BYTE b_OldModuleMask; + ULONG ul_OldInterruptMask; /* Interrupt mask */ + ULONG ul_OldCounterLatchValue; /* Interrupt counter value */ + } s_FIFOInterruptParameters[APCI1710_SAVE_INTERRUPT]; + } s_InterruptParameters; + + str_ModuleInfo s_ModuleInfo[4]; + ULONG ul_TTLPortConfiguration[10]; + +} addi_private; + +static unsigned short pci_list_builded = 0; /* set to 1 when list of card is known */ + +//Function declarations + +static int i_ADDI_Attach(comedi_device * dev, comedi_devconfig * it); +static int i_ADDI_Detach(comedi_device * dev); +static int i_ADDI_Reset(comedi_device * dev); + +static irqreturn_t v_ADDI_Interrupt(int irq, void *d PT_REGS_ARG); +static int i_ADDIDATA_InsnReadEeprom(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c @@ -0,0 +1,1158 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstrasse 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-----------------------------------------------------------------------+ + | Project : ADDI DATA | Compiler : GCC | + | Modulname : addi_eeprom.c | Version : 2.96 | + +-------------------------------+---------------------------------------+ + | Project manager: Eric Stolz | Date : 02/12/2002 | + +-----------------------------------------------------------------------+ + | Description : ADDI EEPROM Module | + +-----------------------------------------------------------------------+ + | UPDATE'S | + +-----------------------------------------------------------------------+ + | Date | Author | Description of updates | + +----------+-----------+------------------------------------------------+ + | | | | + | | | | + +----------+-----------+------------------------------------------------+ +*/ + +#define NVCMD_BEGIN_READ (0x7 << 5 ) // nvRam begin read command +#define NVCMD_LOAD_LOW (0x4 << 5 ) // nvRam load low command +#define NVCMD_LOAD_HIGH (0x5 << 5 ) // nvRam load high command +#define EE76_CMD_LEN 13 // bits in instructions +#define EE_READ 0x0180 // 01 1000 0000 read instruction + +#define WORD unsigned short +#define PWORD unsigned short * +#define PDWORD unsigned int * + +#ifndef DWORD +#define DWORD unsigned int +#endif + +#define EEPROM_DIGITALINPUT 0 +#define EEPROM_DIGITALOUTPUT 1 +#define EEPROM_ANALOGINPUT 2 +#define EEPROM_ANALOGOUTPUT 3 +#define EEPROM_TIMER 4 +#define EEPROM_WATCHDOG 5 +#define EEPROM_TIMER_WATCHDOG_COUNTER 10 + +struct str_Functionality { + BYTE b_Type; + WORD w_Address; +}; + +typedef struct { + WORD w_HeaderSize; + BYTE b_Nfunctions; + struct str_Functionality s_Functions[7]; +} str_MainHeader; + +typedef struct { + WORD w_Nchannel; + BYTE b_Interruptible; + WORD w_NinterruptLogic; +} str_DigitalInputHeader; + +typedef struct { + WORD w_Nchannel; +} str_DigitalOutputHeader; + +// used for timer as well as watchdog + +typedef struct { + WORD w_HeaderSize; + BYTE b_Resolution; + BYTE b_Mode; // in case of Watchdog it is functionality + WORD w_MinTiming; + BYTE b_TimeBase; +} str_TimerDetails; +typedef struct { + + WORD w_Ntimer; + str_TimerDetails s_TimerDetails[4]; // supports 4 timers +} str_TimerMainHeader; + +typedef struct { + WORD w_Nchannel; + BYTE b_Resolution; +} str_AnalogOutputHeader; + +typedef struct { + WORD w_Nchannel; + WORD w_MinConvertTiming; + WORD w_MinDelayTiming; + BYTE b_HasDma; + BYTE b_Resolution; +} str_AnalogInputHeader; + + /*****************************************/ + /* Read Header Functions */ + /*****************************************/ + +INT i_EepromReadMainHeader(WORD w_PCIBoardEepromAddress, + PCHAR pc_PCIChipInformation, comedi_device * dev); + +INT i_EepromReadDigitalInputHeader(WORD w_PCIBoardEepromAddress, + PCHAR pc_PCIChipInformation, WORD w_Address, + str_DigitalInputHeader * s_Header); + +INT i_EepromReadDigitalOutputHeader(WORD w_PCIBoardEepromAddress, + PCHAR pc_PCIChipInformation, WORD w_Address, + str_DigitalOutputHeader * s_Header); + +INT i_EepromReadTimerHeader(WORD w_PCIBoardEepromAddress, + PCHAR pc_PCIChipInformation, WORD w_Address, + str_TimerMainHeader * s_Header); + +INT i_EepromReadAnlogOutputHeader(WORD w_PCIBoardEepromAddress, + PCHAR pc_PCIChipInformation, WORD w_Address, + str_AnalogOutputHeader * s_Header); + +INT i_EepromReadAnlogInputHeader(WORD w_PCIBoardEepromAddress, + PCHAR pc_PCIChipInformation, WORD w_Address, + str_AnalogInputHeader * s_Header); + + /******************************************/ + /* Eeprom Specific Functions */ + /******************************************/ +WORD w_EepromReadWord(WORD w_PCIBoardEepromAddress, PCHAR pc_PCIChipInformation, + WORD w_EepromStartAddress); +VOID v_EepromWaitBusy(WORD w_PCIBoardEepromAddress); +VOID v_EepromClock76(DWORD dw_Address, DWORD dw_RegisterValue); +VOID v_EepromWaitBusy(WORD w_PCIBoardEepromAddress); +VOID v_EepromSendCommand76(DWORD dw_Address, DWORD dw_EepromCommand, + BYTE b_DataLengthInBits); +VOID v_EepromCs76Read(DWORD dw_Address, WORD w_offset, PWORD pw_Value); + +/* ++----------------------------------------------------------------------------+ +| Function Name : WORD w_EepromReadWord | +| (WORD w_PCIBoardEepromAddress, | +| PCHAR pc_PCIChipInformation, | +| WORD w_EepromStartAddress) | ++----------------------------------------------------------------------------+ +| Task : Read from eepromn a word | ++----------------------------------------------------------------------------+ +| Input Parameters : WORD w_PCIBoardEepromAddress : PCI eeprom address | +| | +| PCHAR pc_PCIChipInformation : PCI Chip Type. | +| | +| WORD w_EepromStartAddress : Selected eeprom address | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : Read word value from eeprom | ++----------------------------------------------------------------------------+ +*/ + +WORD w_EepromReadWord(WORD w_PCIBoardEepromAddress, PCHAR pc_PCIChipInformation, + WORD w_EepromStartAddress) +{ + + BYTE b_Counter = 0; + + BYTE b_ReadByte = 0; + + BYTE b_ReadLowByte = 0; + + BYTE b_ReadHighByte = 0; + + BYTE b_SelectedAddressLow = 0; + + BYTE b_SelectedAddressHigh = 0; + + WORD w_ReadWord = 0; + + /**************************/ + + /* Test the PCI chip type */ + + /**************************/ + + if ((!strcmp(pc_PCIChipInformation, "S5920")) || + (!strcmp(pc_PCIChipInformation, "S5933"))) + { + + for (b_Counter = 0; b_Counter < 2; b_Counter++) + { + + b_SelectedAddressLow = (w_EepromStartAddress + b_Counter) % 256; //Read the low 8 bit part + + b_SelectedAddressHigh = (w_EepromStartAddress + b_Counter) / 256; //Read the high 8 bit part + + /************************************/ + + /* Select the load low address mode */ + + /************************************/ + + outb(NVCMD_LOAD_LOW, w_PCIBoardEepromAddress + 0x3F); + + /****************/ + + /* Wait on busy */ + + /****************/ + + v_EepromWaitBusy(w_PCIBoardEepromAddress); + + /************************/ + + /* Load the low address */ + + /************************/ + + outb(b_SelectedAddressLow, + w_PCIBoardEepromAddress + 0x3E); + + /****************/ + + /* Wait on busy */ + + /****************/ + + v_EepromWaitBusy(w_PCIBoardEepromAddress); + + /*************************************/ + + /* Select the load high address mode */ + + /*************************************/ + + outb(NVCMD_LOAD_HIGH, w_PCIBoardEepromAddress + 0x3F); + + /****************/ + + /* Wait on busy */ + + /****************/ + + v_EepromWaitBusy(w_PCIBoardEepromAddress); + + /*************************/ + + /* Load the high address */ + + /*************************/ + + outb(b_SelectedAddressHigh, + w_PCIBoardEepromAddress + 0x3E); + + /****************/ + + /* Wait on busy */ + + /****************/ + + v_EepromWaitBusy(w_PCIBoardEepromAddress); + + /************************/ + + /* Select the READ mode */ + + /************************/ + + outb(NVCMD_BEGIN_READ, w_PCIBoardEepromAddress + 0x3F); + + /****************/ + + /* Wait on busy */ + + /****************/ + + v_EepromWaitBusy(w_PCIBoardEepromAddress); + + /*****************************/ + + /* Read data into the EEPROM */ + + /*****************************/ + + b_ReadByte = inb(w_PCIBoardEepromAddress + 0x3E); + + /****************/ + + /* Wait on busy */ + + /****************/ + + v_EepromWaitBusy(w_PCIBoardEepromAddress); + + /*********************************/ + + /* Select the upper address part */ + + /*********************************/ + + if (b_Counter == 0) + { + + b_ReadLowByte = b_ReadByte; + + } // if(b_Counter==0) + + else + { + + b_ReadHighByte = b_ReadByte; + + } // if(b_Counter==0) + + } // for (b_Counter=0; b_Counter<2; b_Counter++) + + w_ReadWord = (b_ReadLowByte | (((WORD) b_ReadHighByte) * 256)); + + } // end of if ((!strcmp(pc_PCIChipInformation, "S5920")) || (!strcmp(pc_PCIChipInformation, "S5933"))) + + if (!strcmp(pc_PCIChipInformation, "93C76")) + { + + /*************************************/ + + /* Read 16 bit from the EEPROM 93C76 */ + + /*************************************/ + + v_EepromCs76Read(w_PCIBoardEepromAddress, w_EepromStartAddress, + &w_ReadWord); + + } + + return (w_ReadWord); + +} + +/* + ++----------------------------------------------------------------------------+ + +| Function Name : VOID v_EepromWaitBusy | + +| (WORD w_PCIBoardEepromAddress) | + ++----------------------------------------------------------------------------+ + +| Task : Wait the busy flag from PCI controller | + ++----------------------------------------------------------------------------+ + +| Input Parameters : WORD w_PCIBoardEepromAddress : PCI eeprom base address | + ++----------------------------------------------------------------------------+ + +| Output Parameters : - | + ++----------------------------------------------------------------------------+ + +| Return Value : - | + ++----------------------------------------------------------------------------+ + +*/ + +VOID v_EepromWaitBusy(WORD w_PCIBoardEepromAddress) +{ + + BYTE b_EepromBusy = 0; + + do + { + + /*************/ + + /* IMPORTANT */ + + /*************/ + + /************************************************************************/ + + /* An error has been written in the AMCC 5933 book at the page B-13 */ + + /* Ex: if you read a byte and look for the busy statusEEPROM=0x80 and */ + + /* the operator register is AMCC_OP_REG_MCSR+3 */ + + /* WORD read EEPROM=0x8000 andAMCC_OP_REG_MCSR+2 */ + + /* DWORD read EEPROM=0x80000000 and AMCC_OP_REG_MCSR */ + + /************************************************************************/ + + b_EepromBusy = inb(w_PCIBoardEepromAddress + 0x3F); + b_EepromBusy = b_EepromBusy & 0x80; + + } + while (b_EepromBusy == 0x80); + +} + +/* + ++---------------------------------------------------------------------------------+ + +| Function Name : VOID v_EepromClock76(DWORD dw_Address, | + +| DWORD dw_RegisterValue) | + ++---------------------------------------------------------------------------------+ + +| Task : This function sends the clocking sequence to the EEPROM. | + ++---------------------------------------------------------------------------------+ + +| Input Parameters : DWORD dw_Address : PCI eeprom base address | + +| DWORD dw_RegisterValue : PCI eeprom register value to write.| + ++---------------------------------------------------------------------------------+ + +| Output Parameters : - | + ++---------------------------------------------------------------------------------+ + +| Return Value : - | + ++---------------------------------------------------------------------------------+ + +*/ + +VOID v_EepromClock76(DWORD dw_Address, DWORD dw_RegisterValue) +{ + + /************************/ + + /* Set EEPROM clock Low */ + + /************************/ + + outl(dw_RegisterValue & 0x6, dw_Address); + + /***************/ + + /* Wait 0.1 ms */ + + /***************/ + + udelay(100); + + /*************************/ + + /* Set EEPROM clock High */ + + /*************************/ + + outl(dw_RegisterValue | 0x1, dw_Address); + + /***************/ + + /* Wait 0.1 ms */ + + /***************/ + + udelay(100); + +} + +/* + ++---------------------------------------------------------------------------------+ + +| Function Name : VOID v_EepromSendCommand76(DWORD dw_Address, | + +| DWORD dw_EepromCommand, | + +| BYTE b_DataLengthInBits) | + ++---------------------------------------------------------------------------------+ + +| Task : This function sends a Command to the EEPROM 93C76. | + ++---------------------------------------------------------------------------------+ + +| Input Parameters : DWORD dw_Address : PCI eeprom base address | + +| DWORD dw_EepromCommand : PCI eeprom command to write. | + +| BYTE b_DataLengthInBits : PCI eeprom command data length. | + ++---------------------------------------------------------------------------------+ + +| Output Parameters : - | + ++---------------------------------------------------------------------------------+ + +| Return Value : - | + ++---------------------------------------------------------------------------------+ + +*/ + +VOID v_EepromSendCommand76(DWORD dw_Address, DWORD dw_EepromCommand, + BYTE b_DataLengthInBits) +{ + + CHAR c_BitPos = 0; + + DWORD dw_RegisterValue = 0; + + /*****************************/ + + /* Enable EEPROM Chip Select */ + + /*****************************/ + + dw_RegisterValue = 0x2; + + /********************************************************************/ + + /* Toggle EEPROM's Chip select to get it out of Shift Register Mode */ + + /********************************************************************/ + + outl(dw_RegisterValue, dw_Address); + + /***************/ + + /* Wait 0.1 ms */ + + /***************/ + + udelay(100); + + /*******************************************/ + + /* Send EEPROM command - one bit at a time */ + + /*******************************************/ + + for (c_BitPos = (b_DataLengthInBits - 1); c_BitPos >= 0; c_BitPos--) + { + + /**********************************/ + + /* Check if current bit is 0 or 1 */ + + /**********************************/ + + if (dw_EepromCommand & (1 << c_BitPos)) + { + + /***********/ + + /* Write 1 */ + + /***********/ + + dw_RegisterValue = dw_RegisterValue | 0x4; + + } + + else + { + + /***********/ + + /* Write 0 */ + + /***********/ + + dw_RegisterValue = dw_RegisterValue & 0x3; + + } + + /*********************/ + + /* Write the command */ + + /*********************/ + + outl(dw_RegisterValue, dw_Address); + + /***************/ + + /* Wait 0.1 ms */ + + /***************/ + + udelay(100); + + /****************************/ + + /* Trigger the EEPROM clock */ + + /****************************/ + + v_EepromClock76(dw_Address, dw_RegisterValue); + + } + +} + +/* + ++---------------------------------------------------------------------------------+ + +| Function Name : VOID v_EepromCs76Read(DWORD dw_Address, | + +| WORD w_offset, | + +| PWORD pw_Value) | + ++---------------------------------------------------------------------------------+ + +| Task : This function read a value from the EEPROM 93C76. | + ++---------------------------------------------------------------------------------+ + +| Input Parameters : DWORD dw_Address : PCI eeprom base address | + +| WORD w_offset : Offset of the adress to read | + +| PWORD pw_Value : PCI eeprom 16 bit read value. | + ++---------------------------------------------------------------------------------+ + +| Output Parameters : - | + ++---------------------------------------------------------------------------------+ + +| Return Value : - | + ++---------------------------------------------------------------------------------+ + +*/ + +VOID v_EepromCs76Read(DWORD dw_Address, WORD w_offset, PWORD pw_Value) +{ + + CHAR c_BitPos = 0; + + DWORD dw_RegisterValue = 0; + + DWORD dw_RegisterValueRead = 0; + + /*************************************************/ + + /* Send EEPROM read command and offset to EEPROM */ + + /*************************************************/ + + v_EepromSendCommand76(dw_Address, (EE_READ << 4) | (w_offset / 2), + EE76_CMD_LEN); + + /*******************************/ + + /* Get the last register value */ + + /*******************************/ + + dw_RegisterValue = (((w_offset / 2) & 0x1) << 2) | 0x2; + + /*****************************/ + + /* Set the 16-bit value of 0 */ + + /*****************************/ + + *pw_Value = 0; + + /************************/ + + /* Get the 16-bit value */ + + /************************/ + + for (c_BitPos = 0; c_BitPos < 16; c_BitPos++) + { + + /****************************/ + + /* Trigger the EEPROM clock */ + + /****************************/ + + v_EepromClock76(dw_Address, dw_RegisterValue); + + /**********************/ + + /* Get the result bit */ + + /**********************/ + + dw_RegisterValueRead = inl(dw_Address); + + /***************/ + + /* Wait 0.1 ms */ + + /***************/ + + udelay(100); + + /***************************************/ + + /* Get bit value and shift into result */ + + /***************************************/ + + if (dw_RegisterValueRead & 0x8) + { + + /**********/ + + /* Read 1 */ + + /**********/ + + *pw_Value = (*pw_Value << 1) | 0x1; + + } + + else + { + + /**********/ + + /* Read 0 */ + + /**********/ + + *pw_Value = (*pw_Value << 1); + + } + + } + + /*************************/ + + /* Clear all EEPROM bits */ + + /*************************/ + + dw_RegisterValue = 0x0; + + /********************************************************************/ + + /* Toggle EEPROM's Chip select to get it out of Shift Register Mode */ + + /********************************************************************/ + + outl(dw_RegisterValue, dw_Address); + + /***************/ + + /* Wait 0.1 ms */ + + /***************/ + + udelay(100); + +} + + /******************************************/ + /* EEPROM HEADER READ FUNCTIONS */ + /******************************************/ + +/* ++----------------------------------------------------------------------------+ +| Function Name : INT i_EepromReadMainHeader(WORD w_PCIBoardEepromAddress, | +| PCHAR pc_PCIChipInformation,comedi_device *dev) | ++----------------------------------------------------------------------------+ +| Task : Read from eeprom Main Header | ++----------------------------------------------------------------------------+ +| Input Parameters : WORD w_PCIBoardEepromAddress : PCI eeprom address | +| | +| PCHAR pc_PCIChipInformation : PCI Chip Type. | +| | +| comedi_device *dev : comedi device structure | +| pointer | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0 | ++----------------------------------------------------------------------------+ +*/ + +INT i_EepromReadMainHeader(WORD w_PCIBoardEepromAddress, + PCHAR pc_PCIChipInformation, comedi_device * dev) +{ + WORD w_Temp, i, w_Count = 0; + UINT ui_Temp; + str_MainHeader s_MainHeader; + str_DigitalInputHeader s_DigitalInputHeader; + str_DigitalOutputHeader s_DigitalOutputHeader; + //str_TimerMainHeader s_TimerMainHeader,s_WatchdogMainHeader; + str_AnalogOutputHeader s_AnalogOutputHeader; + str_AnalogInputHeader s_AnalogInputHeader; + + // Read size + s_MainHeader.w_HeaderSize = + w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation, + 0x100 + 8); + + // Read nbr of functionality + w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress, + pc_PCIChipInformation, 0x100 + 10); + s_MainHeader.b_Nfunctions = (BYTE) w_Temp & 0x00FF; + + // Read functionality details + for (i = 0; i < s_MainHeader.b_Nfunctions; i++) { + // Read Type + w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress, + pc_PCIChipInformation, 0x100 + 12 + w_Count); + s_MainHeader.s_Functions[i].b_Type = (BYTE) w_Temp & 0x3F; + w_Count = w_Count + 2; + //Read Address + s_MainHeader.s_Functions[i].w_Address = + w_EepromReadWord(w_PCIBoardEepromAddress, + pc_PCIChipInformation, 0x100 + 12 + w_Count); + w_Count = w_Count + 2; + } + + // Display main header info + for (i = 0; i < s_MainHeader.b_Nfunctions; i++) { + + switch (s_MainHeader.s_Functions[i].b_Type) { + case EEPROM_DIGITALINPUT: + i_EepromReadDigitalInputHeader(w_PCIBoardEepromAddress, + pc_PCIChipInformation, + s_MainHeader.s_Functions[i].w_Address, + &s_DigitalInputHeader); + this_board->i_NbrDiChannel = + s_DigitalInputHeader.w_Nchannel; + break; + + case EEPROM_DIGITALOUTPUT: + i_EepromReadDigitalOutputHeader(w_PCIBoardEepromAddress, + pc_PCIChipInformation, + s_MainHeader.s_Functions[i].w_Address, + &s_DigitalOutputHeader); + this_board->i_NbrDoChannel = + s_DigitalOutputHeader.w_Nchannel; + ui_Temp = 0xffffffff; + this_board->i_DoMaxdata = + ui_Temp >> (32 - this_board->i_NbrDoChannel); + break; + + case EEPROM_ANALOGINPUT: + i_EepromReadAnlogInputHeader(w_PCIBoardEepromAddress, + pc_PCIChipInformation, + s_MainHeader.s_Functions[i].w_Address, + &s_AnalogInputHeader); + if (!(strcmp(this_board->pc_DriverName, "apci3200"))) + this_board->i_NbrAiChannel = + s_AnalogInputHeader.w_Nchannel * 4; + else + this_board->i_NbrAiChannel = + s_AnalogInputHeader.w_Nchannel; + this_board->i_Dma = s_AnalogInputHeader.b_HasDma; + this_board->ui_MinAcquisitiontimeNs = + (UINT) s_AnalogInputHeader.w_MinConvertTiming * + 1000; + this_board->ui_MinDelaytimeNs = + (UINT) s_AnalogInputHeader.w_MinDelayTiming * + 1000; + ui_Temp = 0xffff; + this_board->i_AiMaxdata = + ui_Temp >> (16 - + s_AnalogInputHeader.b_Resolution); + break; + + case EEPROM_ANALOGOUTPUT: + i_EepromReadAnlogOutputHeader(w_PCIBoardEepromAddress, + pc_PCIChipInformation, + s_MainHeader.s_Functions[i].w_Address, + &s_AnalogOutputHeader); + this_board->i_NbrAoChannel = + s_AnalogOutputHeader.w_Nchannel; + ui_Temp = 0xffff; + this_board->i_AoMaxdata = + ui_Temp >> (16 - + s_AnalogOutputHeader.b_Resolution); + break; + + case EEPROM_TIMER: + this_board->i_Timer = 1; //Timer subdevice present + break; + + case EEPROM_WATCHDOG: + this_board->i_Timer = 1; //Timer subdevice present + break; + + case EEPROM_TIMER_WATCHDOG_COUNTER: + this_board->i_Timer = 1; //Timer subdevice present + } + } + + return 0; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : INT i_EepromReadDigitalInputHeader(WORD | +| w_PCIBoardEepromAddress,PCHAR pc_PCIChipInformation, | +| WORD w_Address,str_DigitalInputHeader *s_Header) | +| | ++----------------------------------------------------------------------------+ +| Task : Read Digital Input Header | ++----------------------------------------------------------------------------+ +| Input Parameters : WORD w_PCIBoardEepromAddress : PCI eeprom address | +| | +| PCHAR pc_PCIChipInformation : PCI Chip Type. | +| | +| str_DigitalInputHeader *s_Header: Digita Input Header | +| Pointer | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0 | ++----------------------------------------------------------------------------+ +*/ +INT i_EepromReadDigitalInputHeader(WORD w_PCIBoardEepromAddress, + PCHAR pc_PCIChipInformation, WORD w_Address, + str_DigitalInputHeader * s_Header) +{ + WORD w_Temp; + + // read nbr of channels + s_Header->w_Nchannel = + w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation, + 0x100 + w_Address + 6); + + // interruptible or not + w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress, + pc_PCIChipInformation, 0x100 + w_Address + 8); + s_Header->b_Interruptible = (BYTE) (w_Temp >> 7) & 0x01; + +// How many interruptible logic + s_Header->w_NinterruptLogic = + w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation, + 0x100 + w_Address + 10); + + return 0; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : INT i_EepromReadDigitalOutputHeader(WORD | +| w_PCIBoardEepromAddress,PCHAR pc_PCIChipInformation, | +| WORD w_Address,str_DigitalOutputHeader *s_Header) | +| | ++----------------------------------------------------------------------------+ +| Task : Read Digital Output Header | ++----------------------------------------------------------------------------+ +| Input Parameters : WORD w_PCIBoardEepromAddress : PCI eeprom address | +| | +| PCHAR pc_PCIChipInformation : PCI Chip Type. | +| | +| str_DigitalOutputHeader *s_Header: Digital Output Header| +| Pointer | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0 | ++----------------------------------------------------------------------------+ +*/ +INT i_EepromReadDigitalOutputHeader(WORD w_PCIBoardEepromAddress, + PCHAR pc_PCIChipInformation, WORD w_Address, + str_DigitalOutputHeader * s_Header) +{ +// Read Nbr channels + s_Header->w_Nchannel = + w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation, + 0x100 + w_Address + 6); + return 0; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : INT i_EepromReadTimerHeader(WORD w_PCIBoardEepromAddress, | +| PCHAR pc_PCIChipInformation,WORD w_Address, | +| str_TimerMainHeader *s_Header) | ++----------------------------------------------------------------------------+ +| Task : Read Timer or Watchdog Header | ++----------------------------------------------------------------------------+ +| Input Parameters : WORD w_PCIBoardEepromAddress : PCI eeprom address | +| | +| PCHAR pc_PCIChipInformation : PCI Chip Type. | +| | +| str_TimerMainHeader *s_Header: Timer Header | +| Pointer | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0 | ++----------------------------------------------------------------------------+ +*/ +INT i_EepromReadTimerHeader(WORD w_PCIBoardEepromAddress, + PCHAR pc_PCIChipInformation, WORD w_Address, + str_TimerMainHeader * s_Header) +{ + + WORD i, w_Size = 0, w_Temp; + +//Read No of Timer + s_Header->w_Ntimer = + w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation, + 0x100 + w_Address + 6); +//Read header size + + for (i = 0; i < s_Header->w_Ntimer; i++) { + s_Header->s_TimerDetails[i].w_HeaderSize = + w_EepromReadWord(w_PCIBoardEepromAddress, + pc_PCIChipInformation, + 0x100 + w_Address + 8 + w_Size + 0); + w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress, + pc_PCIChipInformation, + 0x100 + w_Address + 8 + w_Size + 2); + + //Read Resolution + s_Header->s_TimerDetails[i].b_Resolution = + (BYTE) (w_Temp >> 10) & 0x3F; + + //Read Mode + s_Header->s_TimerDetails[i].b_Mode = + (BYTE) (w_Temp >> 4) & 0x3F; + + w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress, + pc_PCIChipInformation, + 0x100 + w_Address + 8 + w_Size + 4); + + //Read MinTiming + s_Header->s_TimerDetails[i].w_MinTiming = (w_Temp >> 6) & 0x3FF; + + //Read Timebase + s_Header->s_TimerDetails[i].b_TimeBase = (BYTE) (w_Temp) & 0x3F; + w_Size += s_Header->s_TimerDetails[i].w_HeaderSize; + } + + return 0; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : INT i_EepromReadAnlogOutputHeader(WORD | +| w_PCIBoardEepromAddress,PCHAR pc_PCIChipInformation, | +| WORD w_Address,str_AnalogOutputHeader *s_Header) | ++----------------------------------------------------------------------------+ +| Task : Read Nalog Output Header | ++----------------------------------------------------------------------------+ +| Input Parameters : WORD w_PCIBoardEepromAddress : PCI eeprom address | +| | +| PCHAR pc_PCIChipInformation : PCI Chip Type. | +| | +| str_AnalogOutputHeader *s_Header:Anlog Output Header | +| Pointer | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0 | ++----------------------------------------------------------------------------+ +*/ + +INT i_EepromReadAnlogOutputHeader(WORD w_PCIBoardEepromAddress, + PCHAR pc_PCIChipInformation, WORD w_Address, + str_AnalogOutputHeader * s_Header) +{ + WORD w_Temp; + // No of channels for 1st hard component + w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress, + pc_PCIChipInformation, 0x100 + w_Address + 10); + s_Header->w_Nchannel = (w_Temp >> 4) & 0x03FF; + // Resolution for 1st hard component + w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress, + pc_PCIChipInformation, 0x100 + w_Address + 16); + s_Header->b_Resolution = (BYTE) (w_Temp >> 8) & 0xFF; + return 0; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : INT i_EepromReadAnlogInputHeader(WORD | +| w_PCIBoardEepromAddress,PCHAR pc_PCIChipInformation, | +| WORD w_Address,str_AnalogInputHeader *s_Header) | ++----------------------------------------------------------------------------+ +| Task : Read Nalog Output Header | ++----------------------------------------------------------------------------+ +| Input Parameters : WORD w_PCIBoardEepromAddress : PCI eeprom address | +| | +| PCHAR pc_PCIChipInformation : PCI Chip Type. | +| | +| str_AnalogInputHeader *s_Header:Anlog Input Header | +| Pointer | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0 | ++----------------------------------------------------------------------------+ +*/ + +// Reads only for ONE hardware component +INT i_EepromReadAnlogInputHeader(WORD w_PCIBoardEepromAddress, + PCHAR pc_PCIChipInformation, WORD w_Address, + str_AnalogInputHeader * s_Header) +{ + WORD w_Temp, w_Offset; + w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress, + pc_PCIChipInformation, 0x100 + w_Address + 10); + s_Header->w_Nchannel = (w_Temp >> 4) & 0x03FF; + s_Header->w_MinConvertTiming = + w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation, + 0x100 + w_Address + 16); + s_Header->w_MinDelayTiming = + w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation, + 0x100 + w_Address + 30); + w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress, + pc_PCIChipInformation, 0x100 + w_Address + 20); + s_Header->b_HasDma = (w_Temp >> 13) & 0x01; // whether dma present or not + + w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation, 0x100 + w_Address + 72); // reading Y + w_Temp = w_Temp & 0x00FF; + if (w_Temp) //Y>0 + { + w_Offset = 74 + (2 * w_Temp) + (10 * (1 + (w_Temp / 16))); // offset of first analog input single header + w_Offset = w_Offset + 2; // resolution + } else //Y=0 + { + w_Offset = 74; + w_Offset = w_Offset + 2; // resolution + } + +// read Resolution + w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress, + pc_PCIChipInformation, 0x100 + w_Address + w_Offset); + s_Header->b_Resolution = w_Temp & 0x001F; // last 5 bits + + return 0; +} --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/amcc_s5933_58.h @@ -0,0 +1,462 @@ +/* + Modified by umesh on 16th may 2001 + Modified by sarath on 22nd may 2001 +*/ + +/* + comedi/drivers/amcc_s5933_v_58.h + + Stuff for AMCC S5933 PCI Controller + + Author: Michal Dobes + + Inspirated from general-purpose AMCC S5933 PCI Matchmaker driver + made by Andrea Cisternino + and as result of espionage from MITE code made by David A. Schleef. + Thanks to AMCC for their on-line documentation and bus master DMA + example. +*/ + +#ifndef _AMCC_S5933_H_ +#define _AMCC_S5933_H_ + +#include +#include "../../comedidev.h" + +#ifdef PCI_SUPPORT_VER1 +#error Sorry, no support for 2.1.55 and older! :-(((( +#endif + +/***********Added by sarath for compatibility with APCI3120 + +*************************/ + +#define FIFO_ADVANCE_ON_BYTE_2 0x20000000 // written on base0 + +#define AMWEN_ENABLE 0x02 // added for step 6 dma written on base2 +#define A2P_FIFO_WRITE_ENABLE 0x01 + +#define AGCSTS_TC_ENABLE 0x10000000 // Added for transfer count enable bit + +// ADDON RELATED ADDITIONS +// Constant +#define APCI3120_ENABLE_TRANSFER_ADD_ON_LOW 0x00 +#define APCI3120_ENABLE_TRANSFER_ADD_ON_HIGH 0x1200 +#define APCI3120_A2P_FIFO_MANAGEMENT 0x04000400L +#define APCI3120_AMWEN_ENABLE 0x02 +#define APCI3120_A2P_FIFO_WRITE_ENABLE 0x01 +#define APCI3120_FIFO_ADVANCE_ON_BYTE_2 0x20000000L +#define APCI3120_ENABLE_WRITE_TC_INT 0x00004000L +#define APCI3120_CLEAR_WRITE_TC_INT 0x00040000L +#define APCI3120_DISABLE_AMWEN_AND_A2P_FIFO_WRITE 0x0 +#define APCI3120_DISABLE_BUS_MASTER_ADD_ON 0x0 +#define APCI3120_DISABLE_BUS_MASTER_PCI 0x0 + + // ADD_ON ::: this needed since apci supports 16 bit interface to add on +#define APCI3120_ADD_ON_AGCSTS_LOW 0x3C +#define APCI3120_ADD_ON_AGCSTS_HIGH APCI3120_ADD_ON_AGCSTS_LOW + 2 +#define APCI3120_ADD_ON_MWAR_LOW 0x24 +#define APCI3120_ADD_ON_MWAR_HIGH APCI3120_ADD_ON_MWAR_LOW + 2 +#define APCI3120_ADD_ON_MWTC_LOW 0x058 +#define APCI3120_ADD_ON_MWTC_HIGH APCI3120_ADD_ON_MWTC_LOW + 2 + +// AMCC +#define APCI3120_AMCC_OP_MCSR 0x3C +#define APCI3120_AMCC_OP_REG_INTCSR 0x38 + +/*******from here all upward definitions are added by sarath */ + +/****************************************************************************/ +/* AMCC Operation Register Offsets - PCI */ +/****************************************************************************/ + +#define AMCC_OP_REG_OMB1 0x00 +#define AMCC_OP_REG_OMB2 0x04 +#define AMCC_OP_REG_OMB3 0x08 +#define AMCC_OP_REG_OMB4 0x0c +#define AMCC_OP_REG_IMB1 0x10 +#define AMCC_OP_REG_IMB2 0x14 +#define AMCC_OP_REG_IMB3 0x18 +#define AMCC_OP_REG_IMB4 0x1c +#define AMCC_OP_REG_FIFO 0x20 +#define AMCC_OP_REG_MWAR 0x24 +#define AMCC_OP_REG_MWTC 0x28 +#define AMCC_OP_REG_MRAR 0x2c +#define AMCC_OP_REG_MRTC 0x30 +#define AMCC_OP_REG_MBEF 0x34 +#define AMCC_OP_REG_INTCSR 0x38 +#define AMCC_OP_REG_INTCSR_SRC (AMCC_OP_REG_INTCSR + 2) /* INT source */ +#define AMCC_OP_REG_INTCSR_FEC (AMCC_OP_REG_INTCSR + 3) /* FIFO ctrl */ +#define AMCC_OP_REG_MCSR 0x3c +#define AMCC_OP_REG_MCSR_NVDATA (AMCC_OP_REG_MCSR + 2) /* Data in byte 2 */ +#define AMCC_OP_REG_MCSR_NVCMD (AMCC_OP_REG_MCSR + 3) /* Command in byte 3 */ + +#define AMCC_FIFO_DEPTH_DWORD 8 +#define AMCC_FIFO_DEPTH_BYTES (8 * sizeof (u32)) + +/****************************************************************************/ +/* AMCC Operation Registers Size - PCI */ +/****************************************************************************/ + +#define AMCC_OP_REG_SIZE 64 /* in bytes */ + +/****************************************************************************/ +/* AMCC Operation Register Offsets - Add-on */ +/****************************************************************************/ + +#define AMCC_OP_REG_AIMB1 0x00 +#define AMCC_OP_REG_AIMB2 0x04 +#define AMCC_OP_REG_AIMB3 0x08 +#define AMCC_OP_REG_AIMB4 0x0c +#define AMCC_OP_REG_AOMB1 0x10 +#define AMCC_OP_REG_AOMB2 0x14 +#define AMCC_OP_REG_AOMB3 0x18 +#define AMCC_OP_REG_AOMB4 0x1c +#define AMCC_OP_REG_AFIFO 0x20 +#define AMCC_OP_REG_AMWAR 0x24 +#define AMCC_OP_REG_APTA 0x28 +#define AMCC_OP_REG_APTD 0x2c +#define AMCC_OP_REG_AMRAR 0x30 +#define AMCC_OP_REG_AMBEF 0x34 +#define AMCC_OP_REG_AINT 0x38 +#define AMCC_OP_REG_AGCSTS 0x3c +#define AMCC_OP_REG_AMWTC 0x58 +#define AMCC_OP_REG_AMRTC 0x5c + +/****************************************************************************/ +/* AMCC - Add-on General Control/Status Register */ +/****************************************************************************/ + +#define AGCSTS_CONTROL_MASK 0xfffff000 +#define AGCSTS_NV_ACC_MASK 0xe0000000 +#define AGCSTS_RESET_MASK 0x0e000000 +#define AGCSTS_NV_DA_MASK 0x00ff0000 +#define AGCSTS_BIST_MASK 0x0000f000 +#define AGCSTS_STATUS_MASK 0x000000ff +#define AGCSTS_TCZERO_MASK 0x000000c0 +#define AGCSTS_FIFO_ST_MASK 0x0000003f + +#define AGCSTS_RESET_MBFLAGS 0x08000000 +#define AGCSTS_RESET_P2A_FIFO 0x04000000 +#define AGCSTS_RESET_A2P_FIFO 0x02000000 +#define AGCSTS_RESET_FIFOS (AGCSTS_RESET_A2P_FIFO | AGCSTS_RESET_P2A_FIFO) + +#define AGCSTS_A2P_TCOUNT 0x00000080 +#define AGCSTS_P2A_TCOUNT 0x00000040 + +#define AGCSTS_FS_P2A_EMPTY 0x00000020 +#define AGCSTS_FS_P2A_HALF 0x00000010 +#define AGCSTS_FS_P2A_FULL 0x00000008 + +#define AGCSTS_FS_A2P_EMPTY 0x00000004 +#define AGCSTS_FS_A2P_HALF 0x00000002 +#define AGCSTS_FS_A2P_FULL 0x00000001 + +/****************************************************************************/ +/* AMCC - Add-on Interrupt Control/Status Register */ +/****************************************************************************/ + +#define AINT_INT_MASK 0x00ff0000 +#define AINT_SEL_MASK 0x0000ffff +#define AINT_IS_ENSEL_MASK 0x00001f1f + +#define AINT_INT_ASSERTED 0x00800000 +#define AINT_BM_ERROR 0x00200000 +#define AINT_BIST_INT 0x00100000 + +#define AINT_RT_COMPLETE 0x00080000 +#define AINT_WT_COMPLETE 0x00040000 + +#define AINT_OUT_MB_INT 0x00020000 +#define AINT_IN_MB_INT 0x00010000 + +#define AINT_READ_COMPL 0x00008000 +#define AINT_WRITE_COMPL 0x00004000 + +#define AINT_OMB_ENABLE 0x00001000 +#define AINT_OMB_SELECT 0x00000c00 +#define AINT_OMB_BYTE 0x00000300 + +#define AINT_IMB_ENABLE 0x00000010 +#define AINT_IMB_SELECT 0x0000000c +#define AINT_IMB_BYTE 0x00000003 + +/* Enable Bus Mastering */ +#define EN_A2P_TRANSFERS 0x00000400 +/* FIFO Flag Reset */ +#define RESET_A2P_FLAGS 0x04000000L +/* FIFO Relative Priority */ +#define A2P_HI_PRIORITY 0x00000100L +/* Identify Interrupt Sources */ +#define ANY_S593X_INT 0x00800000L +#define READ_TC_INT 0x00080000L +#define WRITE_TC_INT 0x00040000L +#define IN_MB_INT 0x00020000L +#define MASTER_ABORT_INT 0x00100000L +#define TARGET_ABORT_INT 0x00200000L +#define BUS_MASTER_INT 0x00200000L + +/****************************************************************************/ + +struct pcilst_struct { + struct pcilst_struct *next; + int used; + struct pci_dev *pcidev; + unsigned short vendor; + unsigned short device; + unsigned int master; + unsigned char pci_bus; + unsigned char pci_slot; + unsigned char pci_func; + unsigned int io_addr[5]; + unsigned int irq; +}; + +struct pcilst_struct *amcc_devices; // ptr to root list of all amcc devices + +/****************************************************************************/ + +void v_pci_card_list_init(unsigned short pci_vendor, char display); +void v_pci_card_list_cleanup(unsigned short pci_vendor); +struct pcilst_struct *ptr_find_free_pci_card_by_device(unsigned short vendor_id, + unsigned short device_id); +int i_find_free_pci_card_by_position(unsigned short vendor_id, + unsigned short device_id, unsigned short pci_bus, + unsigned short pci_slot, struct pcilst_struct **card); +struct pcilst_struct *ptr_select_and_alloc_pci_card(unsigned short vendor_id, + unsigned short device_id, unsigned short pci_bus, + unsigned short pci_slot); + +int i_pci_card_alloc(struct pcilst_struct *amcc); +int i_pci_card_free(struct pcilst_struct *amcc); +void v_pci_card_list_display(void); +int i_pci_card_data(struct pcilst_struct *amcc, + unsigned char *pci_bus, unsigned char *pci_slot, + unsigned char *pci_func, unsigned short *io_addr, unsigned short *irq, + unsigned short *master); + +/****************************************************************************/ + +/* build list of amcc cards in this system */ +void v_pci_card_list_init(unsigned short pci_vendor, char display) +{ + struct pci_dev *pcidev; + struct pcilst_struct *amcc, *last; + int i; + + amcc_devices = NULL; + last = NULL; + +#if LINUX_VERSION_CODE < 0x020300 + for (pcidev = pci_devices; pcidev; pcidev = pcidev->next) { +#else + pci_for_each_dev(pcidev) { +#endif + if (pcidev->vendor == pci_vendor) { + amcc = kmalloc(sizeof(*amcc), GFP_KERNEL); + memset(amcc, 0, sizeof(*amcc)); + + amcc->pcidev = pcidev; + if (last) { + last->next = amcc; + } else { + amcc_devices = amcc; + } + last = amcc; + +#if LINUX_VERSION_CODE < 0x020300 + amcc->vendor = pcidev->vendor; + amcc->device = pcidev->device; + amcc->master = pcidev->master; + amcc->pci_bus = pcidev->bus->number; + amcc->pci_slot = PCI_SLOT(pcidev->devfn); + amcc->pci_func = PCI_FUNC(pcidev->devfn); + for (i = 0; i < 5; i++) + amcc->io_addr[i] = + pcidev->base_address[i] & ~3UL; + amcc->irq = pcidev->irq; +#else + amcc->vendor = pcidev->vendor; + amcc->device = pcidev->device; +#if 0 + amcc->master = pcidev->master; // how get this information under 2.4 kernels? +#endif + amcc->pci_bus = pcidev->bus->number; + amcc->pci_slot = PCI_SLOT(pcidev->devfn); + amcc->pci_func = PCI_FUNC(pcidev->devfn); + for (i = 0; i < 5; i++) + amcc->io_addr[i] = + pcidev->resource[i].start & ~3UL; + amcc->irq = pcidev->irq; +#endif + + } + } + + if (display) + v_pci_card_list_display(); +} + +/****************************************************************************/ +/* free up list of amcc cards in this system */ +void v_pci_card_list_cleanup(unsigned short pci_vendor) +{ + struct pcilst_struct *amcc, *next; + + for (amcc = amcc_devices; amcc; amcc = next) { + next = amcc->next; + kfree(amcc); + } + + amcc_devices = NULL; +} + +/****************************************************************************/ +/* find first unused card with this device_id */ +struct pcilst_struct *ptr_find_free_pci_card_by_device(unsigned short vendor_id, + unsigned short device_id) +{ + struct pcilst_struct *amcc, *next; + + for (amcc = amcc_devices; amcc; amcc = next) { + next = amcc->next; + if ((!amcc->used) && (amcc->device == device_id) + && (amcc->vendor == vendor_id)) + return amcc; + + } + + return NULL; +} + +/****************************************************************************/ +/* find card on requested position */ +int i_find_free_pci_card_by_position(unsigned short vendor_id, + unsigned short device_id, unsigned short pci_bus, + unsigned short pci_slot, struct pcilst_struct **card) +{ + struct pcilst_struct *amcc, *next; + + *card = NULL; + for (amcc = amcc_devices; amcc; amcc = next) { + next = amcc->next; + if ((amcc->vendor == vendor_id) && (amcc->device == device_id) + && (amcc->pci_bus == pci_bus) + && (amcc->pci_slot == pci_slot)) { + if (!(amcc->used)) { + *card = amcc; + return 0; // ok, card is found + } else { + rt_printk + (" - \nCard on requested position is used b:s %d:%d!\n", + pci_bus, pci_slot); + return 2; // card exist but is used + } + } + } + + return 1; // no card found +} + +/****************************************************************************/ +/* mark card as used */ +int i_pci_card_alloc(struct pcilst_struct *amcc) +{ + if (!amcc) + return -1; + + if (amcc->used) + return 1; + amcc->used = 1; + return 0; +} + +/****************************************************************************/ +/* mark card as free */ +int i_pci_card_free(struct pcilst_struct *amcc) +{ + if (!amcc) + return -1; + + if (!amcc->used) + return 1; + amcc->used = 0; + return 0; +} + +/****************************************************************************/ +/* display list of found cards */ +void v_pci_card_list_display(void) +{ + struct pcilst_struct *amcc, *next; + + printk("List of pci cards\n"); + printk("bus:slot:func vendor device master io_amcc io_daq irq used\n"); + + for (amcc = amcc_devices; amcc; amcc = next) { + next = amcc->next; + printk("%2d %2d %2d 0x%4x 0x%4x %3s 0x%4x 0x%4x %2d %2d\n", amcc->pci_bus, amcc->pci_slot, amcc->pci_func, amcc->vendor, amcc->device, amcc->master ? "yes" : "no", amcc->io_addr[0], amcc->io_addr[2], amcc->irq, amcc->used); + + } +} + +/****************************************************************************/ +/* return all card information for driver */ +int i_pci_card_data(struct pcilst_struct *amcc, + unsigned char *pci_bus, unsigned char *pci_slot, + unsigned char *pci_func, unsigned short *io_addr, unsigned short *irq, + unsigned short *master) +{ + int i; + + if (!amcc) + return -1; + *pci_bus = amcc->pci_bus; + *pci_slot = amcc->pci_slot; + *pci_func = amcc->pci_func; + for (i = 0; i < 5; i++) + io_addr[i] = amcc->io_addr[i]; + *irq = amcc->irq; + *master = amcc->master; + return 0; +} + +/****************************************************************************/ +/* select and alloc card */ +struct pcilst_struct *ptr_select_and_alloc_pci_card(unsigned short vendor_id, + unsigned short device_id, unsigned short pci_bus, + unsigned short pci_slot) +{ + struct pcilst_struct *card; + + if ((pci_bus < 1) & (pci_slot < 1)) { // use autodetection + if ((card = ptr_find_free_pci_card_by_device(vendor_id, + device_id)) == NULL) { + rt_printk(" - Unused card not found in system!\n"); + return NULL; + } + } else { + switch (i_find_free_pci_card_by_position(vendor_id, device_id, + pci_bus, pci_slot, &card)) { + case 1: + rt_printk + (" - Card not found on requested position b:s %d:%d!\n", + pci_bus, pci_slot); + return NULL; + case 2: + rt_printk + (" - Card on requested position is used b:s %d:%d!\n", + pci_bus, pci_slot); + return NULL; + } + } + + if (i_pci_card_alloc(card) != 0) { + rt_printk(" - Can't allocate card!\n"); + return NULL; + } + + return card; +} + +#endif --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.c @@ -0,0 +1,1690 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-----------------------------------------------------------------------+ + | Project : API APCI1710 | Compiler : gcc | + | Module name : 82X54.C | Version : 2.96 | + +-------------------------------+---------------------------------------+ + | Project manager: Eric Stolz | Date : 02/12/2002 | + +-----------------------------------------------------------------------+ + | Description : APCI-1710 82X54 timer module | + | | + | | + +-----------------------------------------------------------------------+ + | UPDATES | + +-----------------------------------------------------------------------+ + | Date | Author | Description of updates | + +----------+-----------+------------------------------------------------+ + | 29/06/98 | S. Weber | Digital input / output implementation | + |----------|-----------|------------------------------------------------| + | 08/05/00 | Guinot C | - 0400/0228 All Function in RING 0 | + | | | available | + +-----------------------------------------------------------------------+ + | 27.10.03 | J. Krauth | Add the possibility to use a 40 Mhz quartz | + | | | | + +-----------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Included files | ++----------------------------------------------------------------------------+ +*/ + +#include "APCI1710_82x54.h" + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_InitTimer | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_TimerNbr, | +| BYTE_ b_TimerMode, | +| ULONG_ ul_ReloadValue, | +| BYTE_ b_InputClockSelection, | +| BYTE_ b_InputClockLevel, | +| BYTE_ b_OutputLevel, | +| BYTE_ b_HardwareGateLevel) +INT i_InsnConfig_InitTimer(comedi_device *dev,comedi_subdevice *s, + comedi_insn *insn,lsampl_t *data) +| ++----------------------------------------------------------------------------+ +| Task : Configure the Timer (b_TimerNbr) operating mode | +| (b_TimerMode) from selected module (b_ModulNbr). | +| You must calling this function be for you call any | +| other function witch access of the timer. | +| | +| | +| Timer mode description table | +| | +|+--------+-----------------------------+--------------+--------------------+| +||Selected+ Mode description +u_ReloadValue | Hardware gate input|| +|| mode | | description | action || +|+--------+-----------------------------+--------------+--------------------+| +|| |Mode 0 is typically used | | || +|| |for event counting. After | | || +|| |the initialisation, OUT | | || +|| |is initially low, and | | || +|| 0 |will remain low until the |Start counting| Hardware gate || +|| |counter reaches zero. | value | || +|| |OUT then goes high and | | || +|| |remains high until a new | | || +|| |count is written. See | | || +|| |"i_APCI1710_WriteTimerValue" | | || +|| |function. | | || +|+--------+-----------------------------+--------------+--------------------+| +|| |Mode 1 is similar to mode 0 | | || +|| |except for the gate input | | || +|| 1 |action. The gate input is not|Start counting| Hardware trigger || +|| |used for enabled or disabled | value | || +|| |the timer. | | || +|| |The gate input is used for | | || +|| |triggered the timer. | | || +|+--------+-----------------------------+--------------+--------------------+| +|| |This mode functions like a | | || +|| |divide-by-ul_ReloadValue | | || +|| |counter. It is typically used| | || +|| |to generate a real time clock| | || +|| |interrupt. OUT will initially| | || +|| 2 |be high after the | Division | Hardware gate || +|| |initialisation. When the | factor | || +|| |initial count has decremented| | || +|| |to 1, OUT goes low for one | | || +|| |CLK pule. OUT then goes high | | || +|| |again, the counter reloads | | || +|| |the initial count | | || +|| |(ul_ReloadValue) and the | | || +|| |process is repeated. | | || +|| |This action can generated a | | || +|| |interrupt. See function | | || +|| |"i_APCI1710_SetBoardInt- | | || +|| |RoutineX" | | || +|| |and "i_APCI1710_EnableTimer" | | || +|+--------+-----------------------------+--------------+--------------------+| +|| |Mode 3 is typically used for | | || +|| |baud rate generation. This | | || +|| |mode is similar to mode 2 | | || +|| |except for the duty cycle of | | || +|| 3 |OUT. OUT will initially be | Division | Hardware gate || +|| |high after the initialisation| factor | || +|| |When half the initial count | | || +|| |(ul_ReloadValue) has expired,| | || +|| |OUT goes low for the | | || +|| |remainder of the count. The | | || +|| |mode is periodic; the | | || +|| |sequence above is repeated | | || +|| |indefinitely. | | || +|+--------+-----------------------------+--------------+--------------------+| +|| |OUT will be initially high | | || +|| |after the initialisation. | | || +|| |When the initial count | | || +|| 4 |expires OUT will go low for |Start counting| Hardware gate || +|| |one CLK pulse and then go | value | || +|| |high again. | | || +|| |The counting sequences is | | || +|| |triggered by writing a new | | || +|| |value. See | | || +|| |"i_APCI1710_WriteTimerValue" | | || +|| |function. If a new count is | | || +|| |written during counting, | | || +|| |it will be loaded on the | | || +|| |next CLK pulse | | || +|+--------+-----------------------------+--------------+--------------------+| +|| |Mode 5 is similar to mode 4 | | || +|| |except for the gate input | | || +|| |action. The gate input is not| | || +|| 5 |used for enabled or disabled |Start counting| Hardware trigger || +|| |the timer. The gate input is | value | || +|| |used for triggered the timer.| | || +|+--------+-----------------------------+--------------+--------------------+| +| | +| | +| | +| Input clock selection table | +| | +| +--------------------------------+------------------------------------+ | +| | b_InputClockSelection | Description | | +| | parameter | | | +| +--------------------------------+------------------------------------+ | +| | APCI1710_PCI_BUS_CLOCK | For the timer input clock, the PCI | | +| | | bus clock / 4 is used. This PCI bus| | +| | | clock can be 30MHz or 33MHz. For | | +| | | Timer 0 only this selection are | | +| | | available. | | +| +--------------------------------+------------------------------------+ | +| | APCI1710_ FRONT_CONNECTOR_INPUT| Of the front connector you have the| | +| | | possibility to inject a input clock| | +| | | for Timer 1 or Timer 2. The source | | +| | | from this clock can eat the output | | +| | | clock from Timer 0 or any other | | +| | | clock source. | | +| +--------------------------------+------------------------------------+ | +| | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board | +| APCI-1710 | +| BYTE_ b_ModulNbr : Module number to | +| configure (0 to 3) | +| BYTE_ b_TimerNbr : Timer number to | +| configure (0 to 2) | +| BYTE_ b_TimerMode : Timer mode selection | +| (0 to 5) | +| 0: Interrupt on terminal| +| count | +| 1: Hardware | +| retriggerable one- | +| shot | +| 2: Rate generator | +| 3: Square wave mode | +| 4: Software triggered | +| strobe | +| 5: Hardware triggered | +| strobe | +| See timer mode | +| description table. | +| ULONG_ ul_ReloadValue : Start counting value | +| or division factor | +| See timer mode | +| description table. | +| BYTE_ b_InputClockSelection : Selection from input | +| timer clock. | +| See input clock | +| selection table. | +| BYTE_ b_InputClockLevel : Selection from input | +| clock level. | +| 0 : Low active | +| (Input inverted) | +| 1 : High active | +| BYTE_ b_OutputLevel, : Selection from output | +| clock level. | +| 0 : Low active | +| 1 : High active | +| (Output inverted) | +| BYTE_ b_HardwareGateLevel : Selection from | +| hardware gate level. | +| 0 : Low active | +| (Input inverted) | +| 1 : High active | +| If you will not used | +| the hardware gate set | +| this value to 0. +|b_ModulNbr = (BYTE) CR_AREF(insn->chanspec); + b_TimerNbr = (BYTE) CR_CHAN(insn->chanspec); + b_TimerMode = (BYTE) data[0]; + ul_ReloadValue = (ULONG) data[1]; + b_InputClockSelection =(BYTE) data[2]; + b_InputClockLevel =(BYTE) data[3]; + b_OutputLevel =(BYTE) data[4]; + b_HardwareGateLevel =(BYTE) data[5]; ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection wrong | +| -3: Timer selection wrong | +| -4: The module is not a TIMER module | +| -5: Timer mode selection is wrong | +| -6: Input timer clock selection is wrong | +| -7: Selection from input clock level is wrong | +| -8: Selection from output clock level is wrong | +| -9: Selection from hardware gate level is wrong | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnConfigInitTimer(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + + INT i_ReturnValue = 0; + BYTE b_ModulNbr; + BYTE b_TimerNbr; + BYTE b_TimerMode; + ULONG ul_ReloadValue; + BYTE b_InputClockSelection; + BYTE b_InputClockLevel; + BYTE b_OutputLevel; + BYTE b_HardwareGateLevel; + + //BEGIN JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz + DWORD dw_Test = 0; + //END JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz + + i_ReturnValue = insn->n; + b_ModulNbr = (BYTE) CR_AREF(insn->chanspec); + b_TimerNbr = (BYTE) CR_CHAN(insn->chanspec); + b_TimerMode = (BYTE) data[0]; + ul_ReloadValue = (ULONG) data[1]; + b_InputClockSelection = (BYTE) data[2]; + b_InputClockLevel = (BYTE) data[3]; + b_OutputLevel = (BYTE) data[4]; + b_HardwareGateLevel = (BYTE) data[5]; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /***********************/ + /* Test if 82X54 timer */ + /***********************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_82X54_TIMER) { + /*************************/ + /* Test the timer number */ + /*************************/ + + if (b_TimerNbr <= 2) { + /***********************/ + /* Test the timer mode */ + /***********************/ + + if (b_TimerMode <= 5) { + //BEGIN JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz + /*********************************/ + /* Test te imput clock selection */ + /*********************************/ + /* + if (((b_TimerNbr == 0) && (b_InputClockSelection == 0)) || + ((b_TimerNbr != 0) && ((b_InputClockSelection == 0) || (b_InputClockSelection == 1)))) + */ + + if (((b_TimerNbr == 0) + && + (b_InputClockSelection + == + APCI1710_PCI_BUS_CLOCK)) + || ((b_TimerNbr == 0) + && + (b_InputClockSelection + == + APCI1710_10MHZ)) + || ((b_TimerNbr != 0) + && + ((b_InputClockSelection + == + APCI1710_PCI_BUS_CLOCK) + || + (b_InputClockSelection + == + APCI1710_FRONT_CONNECTOR_INPUT) + || + (b_InputClockSelection + == + APCI1710_10MHZ)))) + //END JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz + { + //BEGIN JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz + if (((b_InputClockSelection == + APCI1710_10MHZ) + && ((devpriv->s_BoardInfos.dw_MolduleConfiguration[b_ModulNbr] & 0x0000FFFFUL) >= 0x3131)) || (b_InputClockSelection != APCI1710_10MHZ)) { + //END JK 27.10.2003 : Add the possibility to use a 40 Mhz quartz + /****************************************/ + /* Test the input clock level selection */ + /****************************************/ + + if ((b_InputClockLevel + == 0) + || + (b_InputClockLevel + == 1)) { + /*****************************************/ + /* Test the output clock level selection */ + /*****************************************/ + + if ((b_OutputLevel == 0) || (b_OutputLevel == 1)) { + /******************************************/ + /* Test the hardware gate level selection */ + /******************************************/ + + if ((b_HardwareGateLevel == 0) || (b_HardwareGateLevel == 1)) { + //BEGIN JK 27.10.03 : Add the possibility to use a 40 Mhz quartz + /*****************************************************/ + /* Test if version > 1.1 and clock selection = 10MHz */ + /*****************************************************/ + + if ((b_InputClockSelection == APCI1710_10MHZ) && ((devpriv->s_BoardInfos.dw_MolduleConfiguration[b_ModulNbr] & 0x0000FFFFUL) > 0x3131)) { + /*********************************/ + /* Test if 40MHz quartz on board */ + /*********************************/ + + dw_Test = inl(devpriv->s_BoardInfos.ui_Address + (16 + (b_TimerNbr * 4) + (64 * b_ModulNbr))); + + dw_Test = (dw_Test >> 16) & 1; + } else { + dw_Test = 1; + } + + /************************/ + /* Test if detection OK */ + /************************/ + + if (dw_Test == 1) { + //END JK 27.10.03 : Add the possibility to use a 40 Mhz quartz + /*********************/ + /* Initialisation OK */ + /*********************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_82X54ModuleInfo. + s_82X54TimerInfo + [b_TimerNbr]. + b_82X54Init + = + 1; + + /**********************************/ + /* Save the input clock selection */ + /**********************************/ + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_82X54ModuleInfo. + s_82X54TimerInfo + [b_TimerNbr]. + b_InputClockSelection + = + b_InputClockSelection; + + /******************************/ + /* Save the input clock level */ + /******************************/ + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_82X54ModuleInfo. + s_82X54TimerInfo + [b_TimerNbr]. + b_InputClockLevel + = + ~b_InputClockLevel + & + 1; + + /*************************/ + /* Save the output level */ + /*************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_82X54ModuleInfo. + s_82X54TimerInfo + [b_TimerNbr]. + b_OutputLevel + = + ~b_OutputLevel + & + 1; + + /***********************/ + /* Save the gate level */ + /***********************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_82X54ModuleInfo. + s_82X54TimerInfo + [b_TimerNbr]. + b_HardwareGateLevel + = + b_HardwareGateLevel; + + /****************************************************/ + /* Set the configuration word and disable the timer */ + /****************************************************/ + //BEGIN JK 27.10.03 : Add the possibility to use a 40 Mhz quartz + /* + devpriv->s_ModuleInfo [b_ModulNbr]. + s_82X54ModuleInfo. + s_82X54TimerInfo [b_TimerNbr]. + dw_ConfigurationWord = (DWORD) (((b_HardwareGateLevel << 0) & 0x1) | + ((b_InputClockLevel << 1) & 0x2) | + (((~b_OutputLevel & 1) << 2) & 0x4) | + ((b_InputClockSelection << 4) & 0x10)); + */ + /**************************/ + /* Test if 10MHz selected */ + /**************************/ + + if (b_InputClockSelection == APCI1710_10MHZ) { + b_InputClockSelection + = + 2; + } + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_82X54ModuleInfo. + s_82X54TimerInfo + [b_TimerNbr]. + dw_ConfigurationWord + = + (DWORD) + ( + ((b_HardwareGateLevel << 0) & 0x1) | ((b_InputClockLevel << 1) & 0x2) | (((~b_OutputLevel & 1) << 2) & 0x4) | ((b_InputClockSelection << 4) & 0x30)); + //END JK 27.10.03 : Add the possibility to use a 40 Mhz quartz + outl(devpriv->s_ModuleInfo[b_ModulNbr].s_82X54ModuleInfo.s_82X54TimerInfo[b_TimerNbr].dw_ConfigurationWord, devpriv->s_BoardInfos.ui_Address + 32 + (b_TimerNbr * 4) + (64 * b_ModulNbr)); + + /******************************/ + /* Initialise the 82X54 Timer */ + /******************************/ + + outl((DWORD) b_TimerMode, devpriv->s_BoardInfos.ui_Address + 16 + (b_TimerNbr * 4) + (64 * b_ModulNbr)); + + /**************************/ + /* Write the reload value */ + /**************************/ + + outl(ul_ReloadValue, devpriv->s_BoardInfos.ui_Address + 0 + (b_TimerNbr * 4) + (64 * b_ModulNbr)); + //BEGIN JK 27.10.03 : Add the possibility to use a 40 Mhz quartz + } // if (dw_Test == 1) + else { + /****************************************/ + /* Input timer clock selection is wrong */ + /****************************************/ + + i_ReturnValue + = + -6; + } // if (dw_Test == 1) + //END JK 27.10.03 : Add the possibility to use a 40 Mhz quartz + } // if ((b_HardwareGateLevel == 0) || (b_HardwareGateLevel == 1)) + else { + /***********************************************/ + /* Selection from hardware gate level is wrong */ + /***********************************************/ + + DPRINTK("Selection from hardware gate level is wrong\n"); + i_ReturnValue + = + -9; + } // if ((b_HardwareGateLevel == 0) || (b_HardwareGateLevel == 1)) + } // if ((b_OutputLevel == 0) || (b_OutputLevel == 1)) + else { + /**********************************************/ + /* Selection from output clock level is wrong */ + /**********************************************/ + + DPRINTK("Selection from output clock level is wrong\n"); + i_ReturnValue + = + -8; + } // if ((b_OutputLevel == 0) || (b_OutputLevel == 1)) + } // if ((b_InputClockLevel == 0) || (b_InputClockLevel == 1)) + else { + /*********************************************/ + /* Selection from input clock level is wrong */ + /*********************************************/ + + DPRINTK("Selection from input clock level is wrong\n"); + i_ReturnValue = + -7; + } // if ((b_InputClockLevel == 0) || (b_InputClockLevel == 1)) + } else { + /****************************************/ + /* Input timer clock selection is wrong */ + /****************************************/ + + DPRINTK("Input timer clock selection is wrong\n"); + i_ReturnValue = -6; + } + } else { + /****************************************/ + /* Input timer clock selection is wrong */ + /****************************************/ + + DPRINTK("Input timer clock selection is wrong\n"); + i_ReturnValue = -6; + } + } // if ((b_TimerMode >= 0) && (b_TimerMode <= 5)) + else { + /*********************************/ + /* Timer mode selection is wrong */ + /*********************************/ + + DPRINTK("Timer mode selection is wrong\n"); + i_ReturnValue = -5; + } // if ((b_TimerMode >= 0) && (b_TimerMode <= 5)) + } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) + else { + /*************************/ + /* Timer selection wrong */ + /*************************/ + + DPRINTK("Timer selection wrong\n"); + i_ReturnValue = -3; + } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) + } else { + /************************************/ + /* The module is not a TIMER module */ + /************************************/ + + DPRINTK("The module is not a TIMER module\n"); + i_ReturnValue = -4; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_EnableTimer | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_TimerNbr, | +| BYTE_ b_InterruptEnable) +INT i_APCI1710_InsnWriteEnableDisableTimer(comedi_device *dev,comedi_subdevice *s, + comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Enable OR Disable the Timer (b_TimerNbr) from selected module | +| (b_ModulNbr). You must calling the | +| "i_APCI1710_InitTimer" function be for you call this | +| function. If you enable the timer interrupt, the timer | +| generate a interrupt after the timer value reach | +| the zero. See function "i_APCI1710_SetBoardIntRoutineX"| ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board | +| APCI-1710 | +| BYTE_ b_ModulNbr : Selected module number | +| (0 to 3) | +| BYTE_ b_TimerNbr : Timer number to enable | +| (0 to 2) | +| BYTE_ b_InterruptEnable : Enable or disable the | +| timer interrupt. | +| APCI1710_ENABLE : | +| Enable the timer interrupt | +| APCI1710_DISABLE : | +| Disable the timer interrupt| +i_ReturnValue=insn->n; + b_ModulNbr = (BYTE) CR_AREF(insn->chanspec); + b_TimerNbr = (BYTE) CR_CHAN(insn->chanspec); + b_ActionType = (BYTE) data[0]; // enable disable ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection wrong | +| -3: Timer selection wrong | +| -4: The module is not a TIMER module | +| -5: Timer not initialised see function | +| "i_APCI1710_InitTimer" | +| -6: Interrupt parameter is wrong | +| -7: Interrupt function not initialised. | +| See function "i_APCI1710_SetBoardIntRoutineX" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnWriteEnableDisableTimer(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = 0; + DWORD dw_DummyRead; + BYTE b_ModulNbr; + BYTE b_TimerNbr; + BYTE b_ActionType; + BYTE b_InterruptEnable; + + i_ReturnValue = insn->n; + b_ModulNbr = (BYTE) CR_AREF(insn->chanspec); + b_TimerNbr = (BYTE) CR_CHAN(insn->chanspec); + b_ActionType = (BYTE) data[0]; // enable disable + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /***********************/ + /* Test if 82X54 timer */ + /***********************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_82X54_TIMER) { + /*************************/ + /* Test the timer number */ + /*************************/ + + if (b_TimerNbr <= 2) { + /*****************************/ + /* Test if timer initialised */ + /*****************************/ + + if (devpriv->s_ModuleInfo[b_ModulNbr]. + s_82X54ModuleInfo. + s_82X54TimerInfo[b_TimerNbr]. + b_82X54Init == 1) { + + switch (b_ActionType) { + case APCI1710_ENABLE: + + b_InterruptEnable = + (BYTE) data[1]; + /********************************/ + /* Test the interrupt selection */ + /********************************/ + + if ((b_InterruptEnable == + APCI1710_ENABLE) + || (b_InterruptEnable == + APCI1710_DISABLE)) + { + if (b_InterruptEnable == + APCI1710_ENABLE) + { + + dw_DummyRead = + inl + (devpriv-> + s_BoardInfos. + ui_Address + + 12 + + (b_TimerNbr + * + 4) + + + (64 * b_ModulNbr)); + + /************************/ + /* Enable the interrupt */ + /************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_82X54ModuleInfo. + s_82X54TimerInfo + [b_TimerNbr]. + dw_ConfigurationWord + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_82X54ModuleInfo. + s_82X54TimerInfo + [b_TimerNbr]. + dw_ConfigurationWord + | 0x8; + + outl(devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_82X54ModuleInfo. + s_82X54TimerInfo + [b_TimerNbr]. + dw_ConfigurationWord, + devpriv-> + s_BoardInfos. + ui_Address + + 32 + + (b_TimerNbr + * + 4) + + + (64 * b_ModulNbr)); + devpriv->tsk_Current = current; // Save the current process task structure + + } // if (b_InterruptEnable == APCI1710_ENABLE) + else { + /*************************/ + /* Disable the interrupt */ + /*************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_82X54ModuleInfo. + s_82X54TimerInfo + [b_TimerNbr]. + dw_ConfigurationWord + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_82X54ModuleInfo. + s_82X54TimerInfo + [b_TimerNbr]. + dw_ConfigurationWord + & 0xF7; + + outl(devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_82X54ModuleInfo. + s_82X54TimerInfo + [b_TimerNbr]. + dw_ConfigurationWord, + devpriv-> + s_BoardInfos. + ui_Address + + 32 + + (b_TimerNbr + * + 4) + + + (64 * b_ModulNbr)); + + /***************************/ + /* Save the interrupt flag */ + /***************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_82X54ModuleInfo. + b_InterruptMask + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_82X54ModuleInfo. + b_InterruptMask + & (0xFF + - + (1 << b_TimerNbr)); + } // if (b_InterruptEnable == APCI1710_ENABLE) + + /***********************/ + /* Test if error occur */ + /***********************/ + + if (i_ReturnValue >= 0) { + /***************************/ + /* Save the interrupt flag */ + /***************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_82X54ModuleInfo. + b_InterruptMask + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_82X54ModuleInfo. + b_InterruptMask + | ((1 & b_InterruptEnable) << b_TimerNbr); + + /********************/ + /* Enable the timer */ + /********************/ + + outl(1, devpriv->s_BoardInfos.ui_Address + 44 + (b_TimerNbr * 4) + (64 * b_ModulNbr)); + } + } else { + /********************************/ + /* Interrupt parameter is wrong */ + /********************************/ + + DPRINTK("\n"); + i_ReturnValue = -6; + } + break; + case APCI1710_DISABLE: + /***************************/ + /* Test the interrupt flag */ + /***************************/ + + if (((devpriv->s_ModuleInfo + [b_ModulNbr]. + s_82X54ModuleInfo. + b_InterruptMask + >> + b_TimerNbr) + & 1) == 1) { + /*************************/ + /* Disable the interrupt */ + /*************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_82X54ModuleInfo. + s_82X54TimerInfo + [b_TimerNbr]. + dw_ConfigurationWord + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_82X54ModuleInfo. + s_82X54TimerInfo + [b_TimerNbr]. + dw_ConfigurationWord + & 0xF7; + + outl(devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_82X54ModuleInfo. + s_82X54TimerInfo + [b_TimerNbr]. + dw_ConfigurationWord, + devpriv-> + s_BoardInfos. + ui_Address + + 32 + + (b_TimerNbr * + 4) + + (64 * b_ModulNbr)); + + /***************************/ + /* Save the interrupt flag */ + /***************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_82X54ModuleInfo. + b_InterruptMask + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_82X54ModuleInfo. + b_InterruptMask + & (0xFF - + (1 << b_TimerNbr)); + } + + /*********************/ + /* Disable the timer */ + /*********************/ + + outl(0, devpriv->s_BoardInfos. + ui_Address + 44 + + (b_TimerNbr * 4) + + (64 * b_ModulNbr)); + break; + } // Switch end + } else { + /**************************************/ + /* Timer not initialised see function */ + /**************************************/ + + DPRINTK("Timer not initialised see function\n"); + i_ReturnValue = -5; + } + } else { + /*************************/ + /* Timer selection wrong */ + /*************************/ + + DPRINTK("Timer selection wrong\n"); + i_ReturnValue = -3; + } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) + } else { + /************************************/ + /* The module is not a TIMER module */ + /************************************/ + + DPRINTK("The module is not a TIMER module\n"); + i_ReturnValue = -4; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_ReadAllTimerValue | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| PULONG_ pul_TimerValueArray) +INT i_APCI1710_InsnReadAllTimerValue(comedi_device *dev,comedi_subdevice *s, + comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Return the all timer values from selected timer | +| module (b_ModulNbr). | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board | +| APCI-1710 | +| BYTE_ b_ModulNbr : Selected module number | +| (0 to 3) | ++----------------------------------------------------------------------------+ +| Output Parameters : PULONG_ pul_TimerValueArray : Timer value array. | +| Element 0 contain the timer 0 value. | +| Element 1 contain the timer 1 value. | +| Element 2 contain the timer 2 value. | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection wrong | +| -3: The module is not a TIMER module | +| -4: Timer 0 not initialised see function | +| "i_APCI1710_InitTimer" | +| -5: Timer 1 not initialised see function | +| "i_APCI1710_InitTimer" | +| -6: Timer 2 not initialised see function | +| "i_APCI1710_InitTimer" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnReadAllTimerValue(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = 0; + BYTE b_ModulNbr, b_ReadType; + PULONG pul_TimerValueArray; + + b_ModulNbr = CR_AREF(insn->chanspec); + b_ReadType = CR_CHAN(insn->chanspec); + pul_TimerValueArray = (PULONG) data; + i_ReturnValue = insn->n; + + switch (b_ReadType) { + case APCI1710_TIMER_READINTERRUPT: + + data[0] = devpriv->s_InterruptParameters. + s_FIFOInterruptParameters[devpriv-> + s_InterruptParameters.ui_Read].b_OldModuleMask; + data[1] = devpriv->s_InterruptParameters. + s_FIFOInterruptParameters[devpriv-> + s_InterruptParameters.ui_Read].ul_OldInterruptMask; + data[2] = devpriv->s_InterruptParameters. + s_FIFOInterruptParameters[devpriv-> + s_InterruptParameters.ui_Read].ul_OldCounterLatchValue; + + /**************************/ + /* Increment the read FIFO */ + /***************************/ + + devpriv-> + s_InterruptParameters. + ui_Read = (devpriv-> + s_InterruptParameters. + ui_Read + 1) % APCI1710_SAVE_INTERRUPT; + + break; + + case APCI1710_TIMER_READALLTIMER: + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /***********************/ + /* Test if 82X54 timer */ + /***********************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_82X54_TIMER) { + /********************************/ + /* Test if timer 0 iniutialised */ + /********************************/ + + if (devpriv->s_ModuleInfo[b_ModulNbr]. + s_82X54ModuleInfo. + s_82X54TimerInfo[0].b_82X54Init == 1) { + /********************************/ + /* Test if timer 1 iniutialised */ + /********************************/ + + if (devpriv->s_ModuleInfo[b_ModulNbr]. + s_82X54ModuleInfo. + s_82X54TimerInfo[1]. + b_82X54Init == 1) { + /********************************/ + /* Test if timer 2 iniutialised */ + /********************************/ + + if (devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_82X54ModuleInfo. + s_82X54TimerInfo[2]. + b_82X54Init == 1) { + /*********************/ + /* Latch all counter */ + /*********************/ + + outl(0x17, + devpriv-> + s_BoardInfos. + ui_Address + + 12 + + (64 * b_ModulNbr)); + + /**************************/ + /* Read the timer 0 value */ + /**************************/ + + pul_TimerValueArray[0] = + inl(devpriv-> + s_BoardInfos. + ui_Address + 0 + + (64 * b_ModulNbr)); + + /**************************/ + /* Read the timer 1 value */ + /**************************/ + + pul_TimerValueArray[1] = + inl(devpriv-> + s_BoardInfos. + ui_Address + 4 + + (64 * b_ModulNbr)); + + /**************************/ + /* Read the timer 2 value */ + /**************************/ + + pul_TimerValueArray[2] = + inl(devpriv-> + s_BoardInfos. + ui_Address + 8 + + (64 * b_ModulNbr)); + } else { + /****************************************/ + /* Timer 2 not initialised see function */ + /****************************************/ + + DPRINTK("Timer 2 not initialised see function\n"); + i_ReturnValue = -6; + } + } else { + /****************************************/ + /* Timer 1 not initialised see function */ + /****************************************/ + + DPRINTK("Timer 1 not initialised see function\n"); + i_ReturnValue = -5; + } + } else { + /****************************************/ + /* Timer 0 not initialised see function */ + /****************************************/ + + DPRINTK("Timer 0 not initialised see function\n"); + i_ReturnValue = -4; + } + } else { + /************************************/ + /* The module is not a TIMER module */ + /************************************/ + + DPRINTK("The module is not a TIMER module\n"); + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + } // End of Switch + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name :INT i_APCI1710_InsnBitsTimer(comedi_device *dev, +comedi_subdevice *s,comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Read write functions for Timer | ++----------------------------------------------------------------------------+ +| Input Parameters : ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnBitsTimer(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + BYTE b_BitsType; + INT i_ReturnValue = 0; + b_BitsType = data[0]; + + printk("\n82X54"); + + switch (b_BitsType) { + case APCI1710_TIMER_READVALUE: + i_ReturnValue = i_APCI1710_ReadTimerValue(dev, + (BYTE) CR_AREF(insn->chanspec), + (BYTE) CR_CHAN(insn->chanspec), (PULONG) & data[0]); + break; + + case APCI1710_TIMER_GETOUTPUTLEVEL: + i_ReturnValue = i_APCI1710_GetTimerOutputLevel(dev, + (BYTE) CR_AREF(insn->chanspec), + (BYTE) CR_CHAN(insn->chanspec), (PBYTE) & data[0]); + break; + + case APCI1710_TIMER_GETPROGRESSSTATUS: + i_ReturnValue = i_APCI1710_GetTimerProgressStatus(dev, + (BYTE) CR_AREF(insn->chanspec), + (BYTE) CR_CHAN(insn->chanspec), (PBYTE) & data[0]); + break; + + case APCI1710_TIMER_WRITEVALUE: + i_ReturnValue = i_APCI1710_WriteTimerValue(dev, + (BYTE) CR_AREF(insn->chanspec), + (BYTE) CR_CHAN(insn->chanspec), (ULONG) data[1]); + + break; + + default: + printk("Bits Config Parameter Wrong\n"); + i_ReturnValue = -1; + } + + if (i_ReturnValue >= 0) + i_ReturnValue = insn->n; + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_ReadTimerValue | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_TimerNbr, | +| PULONG_ pul_TimerValue) | ++----------------------------------------------------------------------------+ +| Task : Return the timer value from selected digital timer | +| (b_TimerNbr) from selected timer module (b_ModulNbr). | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board | +| APCI-1710 | +| BYTE_ b_ModulNbr : Selected module number | +| (0 to 3) | +| BYTE_ b_TimerNbr : Timer number to read | +| (0 to 2) | ++----------------------------------------------------------------------------+ +| Output Parameters : PULONG_ pul_TimerValue : Timer value | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection wrong | +| -3: Timer selection wrong | +| -4: The module is not a TIMER module | +| -5: Timer not initialised see function | +| "i_APCI1710_InitTimer" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_ReadTimerValue(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_TimerNbr, PULONG pul_TimerValue) +{ + INT i_ReturnValue = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /***********************/ + /* Test if 82X54 timer */ + /***********************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_82X54_TIMER) { + /*************************/ + /* Test the timer number */ + /*************************/ + + if (b_TimerNbr <= 2) { + /*****************************/ + /* Test if timer initialised */ + /*****************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_82X54ModuleInfo. + s_82X54TimerInfo[b_TimerNbr]. + b_82X54Init == 1) { + /*************************/ + /* Latch the timer value */ + /*************************/ + + outl((2 << b_TimerNbr) | 0xD0, + devpriv->s_BoardInfos. + ui_Address + 12 + + (64 * b_ModulNbr)); + + /**************************/ + /* Read the counter value */ + /**************************/ + + *pul_TimerValue = + inl(devpriv->s_BoardInfos. + ui_Address + (b_TimerNbr * 4) + + (64 * b_ModulNbr)); + } else { + /**************************************/ + /* Timer not initialised see function */ + /**************************************/ + DPRINTK("Timer not initialised see function\n"); + i_ReturnValue = -5; + } + } else { + /*************************/ + /* Timer selection wrong */ + /*************************/ + DPRINTK("Timer selection wrong\n"); + i_ReturnValue = -3; + } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) + } else { + /************************************/ + /* The module is not a TIMER module */ + /************************************/ + DPRINTK("The module is not a TIMER module\n"); + i_ReturnValue = -4; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + + /* + +----------------------------------------------------------------------------+ + | Function Name : _INT_ i_APCI1710_GetTimerOutputLevel | + | (BYTE_ b_BoardHandle, | + | BYTE_ b_ModulNbr, | + | BYTE_ b_TimerNbr, | + | PBYTE_ pb_OutputLevel) | + +----------------------------------------------------------------------------+ + | Task : Return the output signal level (pb_OutputLevel) from | + | selected digital timer (b_TimerNbr) from selected timer| + | module (b_ModulNbr). | + +----------------------------------------------------------------------------+ + | Input Parameters : BYTE_ b_BoardHandle : Handle of board | + | APCI-1710 | + | BYTE_ b_ModulNbr : Selected module number | + | (0 to 3) | + | BYTE_ b_TimerNbr : Timer number to test | + | (0 to 2) | + +----------------------------------------------------------------------------+ + | Output Parameters : PBYTE_ pb_OutputLevel : Output signal level | + | 0 : The output is low | + | 1 : The output is high | + +----------------------------------------------------------------------------+ + | Return Value : 0: No error | + | -1: The handle parameter of the board is wrong | + | -2: Module selection wrong | + | -3: Timer selection wrong | + | -4: The module is not a TIMER module | + | -5: Timer not initialised see function | + | "i_APCI1710_InitTimer" | + +----------------------------------------------------------------------------+ + */ + +INT i_APCI1710_GetTimerOutputLevel(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_TimerNbr, PBYTE pb_OutputLevel) +{ + INT i_ReturnValue = 0; + DWORD dw_TimerStatus; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /***********************/ + /* Test if 82X54 timer */ + /***********************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_82X54_TIMER) { + /*************************/ + /* Test the timer number */ + /*************************/ + + if (b_TimerNbr <= 2) { + /*****************************/ + /* Test if timer initialised */ + /*****************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_82X54ModuleInfo. + s_82X54TimerInfo[b_TimerNbr]. + b_82X54Init == 1) { + /*************************/ + /* Latch the timer value */ + /*************************/ + + outl((2 << b_TimerNbr) | 0xE0, + devpriv->s_BoardInfos. + ui_Address + 12 + + (64 * b_ModulNbr)); + + /*************************/ + /* Read the timer status */ + /*************************/ + + dw_TimerStatus = + inl(devpriv->s_BoardInfos. + ui_Address + 16 + + (b_TimerNbr * 4) + + (64 * b_ModulNbr)); + + *pb_OutputLevel = + (BYTE) (((dw_TimerStatus >> 7) & + 1) ^ devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_82X54ModuleInfo. + s_82X54TimerInfo[b_TimerNbr]. + b_OutputLevel); + } else { + /**************************************/ + /* Timer not initialised see function */ + /**************************************/ + DPRINTK("Timer not initialised see function\n"); + i_ReturnValue = -5; + } + } else { + /*************************/ + /* Timer selection wrong */ + /*************************/ + DPRINTK("Timer selection wrong\n"); + i_ReturnValue = -3; + } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) + } else { + /************************************/ + /* The module is not a TIMER module */ + /************************************/ + DPRINTK("The module is not a TIMER module\n"); + i_ReturnValue = -4; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_GetTimerProgressStatus | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_TimerNbr, | +| PBYTE_ pb_TimerStatus) | ++----------------------------------------------------------------------------+ +| Task : Return the progress status (pb_TimerStatus) from | +| selected digital timer (b_TimerNbr) from selected timer| +| module (b_ModulNbr). | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board | +| APCI-1710 | +| BYTE_ b_ModulNbr : Selected module number | +| (0 to 3) | +| BYTE_ b_TimerNbr : Timer number to test | +| (0 to 2) | ++----------------------------------------------------------------------------+ +| Output Parameters : PBYTE_ pb_TimerStatus : Output signal level | +| 0 : Timer not in progress | +| 1 : Timer in progress | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection wrong | +| -3: Timer selection wrong | +| -4: The module is not a TIMER module | +| -5: Timer not initialised see function | +| "i_APCI1710_InitTimer" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_GetTimerProgressStatus(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_TimerNbr, PBYTE pb_TimerStatus) +{ + INT i_ReturnValue = 0; + DWORD dw_TimerStatus; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /***********************/ + /* Test if 82X54 timer */ + /***********************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_82X54_TIMER) { + /*************************/ + /* Test the timer number */ + /*************************/ + + if (b_TimerNbr <= 2) { + /*****************************/ + /* Test if timer initialised */ + /*****************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_82X54ModuleInfo. + s_82X54TimerInfo[b_TimerNbr]. + b_82X54Init == 1) { + /*************************/ + /* Latch the timer value */ + /*************************/ + + outl((2 << b_TimerNbr) | 0xE0, + devpriv->s_BoardInfos. + ui_Address + 12 + + (64 * b_ModulNbr)); + + /*************************/ + /* Read the timer status */ + /*************************/ + + dw_TimerStatus = + inl(devpriv->s_BoardInfos. + ui_Address + 16 + + (b_TimerNbr * 4) + + (64 * b_ModulNbr)); + + *pb_TimerStatus = + (BYTE) ((dw_TimerStatus) >> 8) & + 1; + printk("ProgressStatus : %d", + *pb_TimerStatus); + } else { + /**************************************/ + /* Timer not initialised see function */ + /**************************************/ + + i_ReturnValue = -5; + } + } else { + /*************************/ + /* Timer selection wrong */ + /*************************/ + + i_ReturnValue = -3; + } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) + } else { + /************************************/ + /* The module is not a TIMER module */ + /************************************/ + + i_ReturnValue = -4; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_WriteTimerValue | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_TimerNbr, | +| ULONG_ ul_WriteValue) | ++----------------------------------------------------------------------------+ +| Task : Write the value (ul_WriteValue) into the selected timer| +| (b_TimerNbr) from selected timer module (b_ModulNbr). | +| The action in depend of the time mode selection. | +| See timer mode description table. | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board | +| APCI-1710 | +| BYTE_ b_ModulNbr : Selected module number | +| (0 to 3) | +| BYTE_ b_TimerNbr : Timer number to write | +| (0 to 2) | +| ULONG_ ul_WriteValue : Value to write | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection wrong | +| -3: Timer selection wrong | +| -4: The module is not a TIMER module | +| -5: Timer not initialised see function | +| "i_APCI1710_InitTimer" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_WriteTimerValue(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_TimerNbr, ULONG ul_WriteValue) +{ + INT i_ReturnValue = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /***********************/ + /* Test if 82X54 timer */ + /***********************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_82X54_TIMER) { + /*************************/ + /* Test the timer number */ + /*************************/ + + if (b_TimerNbr <= 2) { + /*****************************/ + /* Test if timer initialised */ + /*****************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_82X54ModuleInfo. + s_82X54TimerInfo[b_TimerNbr]. + b_82X54Init == 1) { + /*******************/ + /* Write the value */ + /*******************/ + + outl(ul_WriteValue, + devpriv->s_BoardInfos. + ui_Address + (b_TimerNbr * 4) + + (64 * b_ModulNbr)); + } else { + /**************************************/ + /* Timer not initialised see function */ + /**************************************/ + DPRINTK("Timer not initialised see function\n"); + i_ReturnValue = -5; + } + } else { + /*************************/ + /* Timer selection wrong */ + /*************************/ + DPRINTK("Timer selection wrong\n"); + i_ReturnValue = -3; + } // if ((b_TimerNbr >= 0) && (b_TimerNbr <= 2)) + } else { + /************************************/ + /* The module is not a TIMER module */ + /************************************/ + DPRINTK("The module is not a TIMER module\n"); + i_ReturnValue = -4; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_82x54.h @@ -0,0 +1,84 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ + +#define APCI1710_PCI_BUS_CLOCK 0 +#define APCI1710_FRONT_CONNECTOR_INPUT 1 +#define APCI1710_TIMER_READVALUE 0 +#define APCI1710_TIMER_GETOUTPUTLEVEL 1 +#define APCI1710_TIMER_GETPROGRESSSTATUS 2 +#define APCI1710_TIMER_WRITEVALUE 3 + +#define APCI1710_TIMER_READINTERRUPT 1 +#define APCI1710_TIMER_READALLTIMER 2 + +// BEGIN JK 27.10.03 : Add the possibility to use a 40 Mhz quartz +#ifndef APCI1710_10MHZ +#define APCI1710_10MHZ 10 +#endif +// END JK 27.10.03 : Add the possibility to use a 40 Mhz quartz + +/* ++----------------------------------------------------------------------------+ +| 82X54 TIMER INISIALISATION FUNCTION | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnConfigInitTimer(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +INT i_APCI1710_InsnWriteEnableDisableTimer(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); +/* ++----------------------------------------------------------------------------+ +| 82X54 READ FUNCTION | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnReadAllTimerValue(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +INT i_APCI1710_InsnBitsTimer(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +/* ++----------------------------------------------------------------------------+ +| 82X54 READ & WRITE FUNCTION | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI1710_ReadTimerValue(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_TimerNbr, PULONG pul_TimerValue); + +INT i_APCI1710_GetTimerOutputLevel(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_TimerNbr, PBYTE pb_OutputLevel); + +INT i_APCI1710_GetTimerProgressStatus(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_TimerNbr, PBYTE pb_TimerStatus); + +/* ++----------------------------------------------------------------------------+ +| 82X54 WRITE FUNCTION | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI1710_WriteTimerValue(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_TimerNbr, ULONG ul_WriteValue); --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c @@ -0,0 +1,2032 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-----------------------------------------------------------------------+ + | Project : API APCI1710 | Compiler : gcc | + | Module name : CHRONO.C | Version : 2.96 | + +-------------------------------+---------------------------------------+ + | Project manager: Eric Stolz | Date : 02/12/2002 | + +-----------------------------------------------------------------------+ + | Description : APCI-1710 chronometer module | + | | + | | + +-----------------------------------------------------------------------+ + | UPDATES | + +-----------------------------------------------------------------------+ + | Date | Author | Description of updates | + +----------+-----------+------------------------------------------------+ + | 29/06/98 | S. Weber | Digital input / output implementation | + |----------|-----------|------------------------------------------------| + | 08/05/00 | Guinot C | - 0400/0228 All Function in RING 0 | + | | | available | + +-----------------------------------------------------------------------+ + | | | | + | | | | + +-----------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Included files | ++----------------------------------------------------------------------------+ +*/ +#include "APCI1710_Chrono.h" + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_InitChrono | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_ChronoMode, | +| BYTE_ b_PCIInputClock, | +| BYTE_ b_TimingUnit, | +| ULONG_ ul_TimingInterval, | +| PULONG_ pul_RealTimingInterval) + ++----------------------------------------------------------------------------+ +| Task : Configure the chronometer operating mode (b_ChronoMode)| +| from selected module (b_ModulNbr). | +| The ul_TimingInterval and ul_TimingUnit determine the | +| timing base for the measurement. | +| The pul_RealTimingInterval return the real timing | +| value. You must calling this function be for you call | +| any other function witch access of the chronometer. | +| | +| Witch this functionality from the APCI-1710 you have | +| the possibility to measure the timing witch two event. | +| | +| The mode 0 and 1 is appropriate for period measurement.| +| The mode 2 and 3 is appropriate for frequent | +| measurement. | +| The mode 4 to 7 is appropriate for measuring the timing| +| between two event. | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr CR_AREF(insn->chanspec) : Module number to configure | +| (0 to 3) | +| BYTE_ b_ChronoMode data[0] : Chronometer action mode | +| (0 to 7). | +| BYTE_ b_PCIInputClock data[1] : Selection from PCI bus clock| +| - APCI1710_30MHZ : | +| The PC have a PCI bus | +| clock from 30 MHz | +| - APCI1710_33MHZ : | +| The PC have a PCI bus | +| clock from 33 MHz | +| - APCI1710_40MHZ | +| The APCI-1710 have a | +| integrated 40Mhz | +| quartz. | +| BYTE_ b_TimingUnit data[2] : Base timing unity (0 to 4) | +| 0 : ns | +| 1 : µs | +| 2 : ms | +| 3 : s | +| 4 : mn | +| ULONG_ ul_TimingInterval : data[3] Base timing value. | ++----------------------------------------------------------------------------+ +| Output Parameters : PULONG_ pul_RealTimingInterval : Real base timing | +| value. +| data[0] ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection wrong | +| -3: The module is not a Chronometer module | +| -4: Chronometer mode selection is wrong | +| -5: The selected PCI input clock is wrong | +| -6: Timing unity selection is wrong | +| -7: Base timing selection is wrong | +| -8: You can not used the 40MHz clock selection wich | +| this board | +| -9: You can not used the 40MHz clock selection wich | +| this CHRONOS version | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnConfigInitChrono(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = 0; + ULONG ul_TimerValue = 0; + ULONG ul_TimingInterval = 0; + ULONG ul_RealTimingInterval = 0; + double d_RealTimingInterval = 0; + DWORD dw_ModeArray[8] = + { 0x01, 0x05, 0x00, 0x04, 0x02, 0x0E, 0x0A, 0x06 }; + BYTE b_ModulNbr, b_ChronoMode, b_PCIInputClock, b_TimingUnit; + + b_ModulNbr = CR_AREF(insn->chanspec); + b_ChronoMode = (BYTE) data[0]; + b_PCIInputClock = (BYTE) data[1]; + b_TimingUnit = (BYTE) data[2]; + ul_TimingInterval = (ULONG) data[3]; + i_ReturnValue = insn->n; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /***********************/ + /* Test if chronometer */ + /***********************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_CHRONOMETER) { + /*****************************/ + /* Test the chronometer mode */ + /*****************************/ + + if (b_ChronoMode <= 7) { + /**************************/ + /* Test the PCI bus clock */ + /**************************/ + + if ((b_PCIInputClock == APCI1710_30MHZ) || + (b_PCIInputClock == APCI1710_33MHZ) || + (b_PCIInputClock == APCI1710_40MHZ)) { + /*************************/ + /* Test the timing unity */ + /*************************/ + + if (b_TimingUnit <= 4) { + /**********************************/ + /* Test the base timing selection */ + /**********************************/ + + if (((b_PCIInputClock == APCI1710_30MHZ) && (b_TimingUnit == 0) && (ul_TimingInterval >= 66) && (ul_TimingInterval <= 0xFFFFFFFFUL)) || ((b_PCIInputClock == APCI1710_30MHZ) && (b_TimingUnit == 1) && (ul_TimingInterval >= 1) && (ul_TimingInterval <= 143165576UL)) || ((b_PCIInputClock == APCI1710_30MHZ) && (b_TimingUnit == 2) && (ul_TimingInterval >= 1) && (ul_TimingInterval <= 143165UL)) || ((b_PCIInputClock == APCI1710_30MHZ) && (b_TimingUnit == 3) && (ul_TimingInterval >= 1) && (ul_TimingInterval <= 143UL)) || ((b_PCIInputClock == APCI1710_30MHZ) && (b_TimingUnit == 4) && (ul_TimingInterval >= 1) && (ul_TimingInterval <= 2UL)) || ((b_PCIInputClock == APCI1710_33MHZ) && (b_TimingUnit == 0) && (ul_TimingInterval >= 60) && (ul_TimingInterval <= 0xFFFFFFFFUL)) || ((b_PCIInputClock == APCI1710_33MHZ) && (b_TimingUnit == 1) && (ul_TimingInterval >= 1) && (ul_TimingInterval <= 130150240UL)) || ((b_PCIInputClock == APCI1710_33MHZ) && (b_TimingUnit == 2) && (ul_TimingInterval >= 1) && (ul_TimingInterval <= 130150UL)) || ((b_PCIInputClock == APCI1710_33MHZ) && (b_TimingUnit == 3) && (ul_TimingInterval >= 1) && (ul_TimingInterval <= 130UL)) || ((b_PCIInputClock == APCI1710_33MHZ) && (b_TimingUnit == 4) && (ul_TimingInterval >= 1) && (ul_TimingInterval <= 2UL)) || ((b_PCIInputClock == APCI1710_40MHZ) && (b_TimingUnit == 0) && (ul_TimingInterval >= 50) && (ul_TimingInterval <= 0xFFFFFFFFUL)) || ((b_PCIInputClock == APCI1710_40MHZ) && (b_TimingUnit == 1) && (ul_TimingInterval >= 1) && (ul_TimingInterval <= 107374182UL)) || ((b_PCIInputClock == APCI1710_40MHZ) && (b_TimingUnit == 2) && (ul_TimingInterval >= 1) && (ul_TimingInterval <= 107374UL)) || ((b_PCIInputClock == APCI1710_40MHZ) && (b_TimingUnit == 3) && (ul_TimingInterval >= 1) && (ul_TimingInterval <= 107UL)) || ((b_PCIInputClock == APCI1710_40MHZ) && (b_TimingUnit == 4) && (ul_TimingInterval >= 1) && (ul_TimingInterval <= 1UL))) { + /**************************/ + /* Test the board version */ + /**************************/ + + if (((b_PCIInputClock == APCI1710_40MHZ) && (devpriv->s_BoardInfos.b_BoardVersion > 0)) || (b_PCIInputClock != APCI1710_40MHZ)) { + /************************/ + /* Test the TOR version */ + /************************/ + + if (((b_PCIInputClock == APCI1710_40MHZ) && ((devpriv->s_BoardInfos.dw_MolduleConfiguration[b_ModulNbr] & 0xFFFF) >= 0x3131)) || (b_PCIInputClock != APCI1710_40MHZ)) { + fpu_begin + (); + + /****************************************/ + /* Calculate the timer 0 division fator */ + /****************************************/ + + switch (b_TimingUnit) { + /******/ + /* ns */ + /******/ + + case 0: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_TimerValue + = + (ULONG) + (ul_TimingInterval + * + (0.001 * b_PCIInputClock)); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_TimingInterval * (0.001 * (double)b_PCIInputClock)) >= ((double)((double)ul_TimerValue + 0.5))) { + ul_TimerValue + = + ul_TimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + ul_RealTimingInterval + = + (ULONG) + (ul_TimerValue + / + (0.001 * (double)b_PCIInputClock)); + d_RealTimingInterval + = + (double) + ul_TimerValue + / + (0.001 + * + (double) + b_PCIInputClock); + + if ((double)((double)ul_TimerValue / (0.001 * (double)b_PCIInputClock)) >= (double)((double)ul_RealTimingInterval + 0.5)) { + ul_RealTimingInterval + = + ul_RealTimingInterval + + + 1; + } + + ul_TimingInterval + = + ul_TimingInterval + - + 1; + ul_TimerValue + = + ul_TimerValue + - + 2; + if (b_PCIInputClock != APCI1710_40MHZ) { + ul_TimerValue + = + (ULONG) + ( + (double) + (ul_TimerValue) + * + 0.99392); + } + + break; + + /******/ + /* æs */ + /******/ + + case 1: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_TimerValue + = + (ULONG) + (ul_TimingInterval + * + (1.0 * b_PCIInputClock)); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_TimingInterval * (1.0 * (double)b_PCIInputClock)) >= ((double)((double)ul_TimerValue + 0.5))) { + ul_TimerValue + = + ul_TimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + ul_RealTimingInterval + = + (ULONG) + (ul_TimerValue + / + (1.0 * (double)b_PCIInputClock)); + d_RealTimingInterval + = + (double) + ul_TimerValue + / + ( + (double) + 1.0 + * + (double) + b_PCIInputClock); + + if ((double)((double)ul_TimerValue / (1.0 * (double)b_PCIInputClock)) >= (double)((double)ul_RealTimingInterval + 0.5)) { + ul_RealTimingInterval + = + ul_RealTimingInterval + + + 1; + } + + ul_TimingInterval + = + ul_TimingInterval + - + 1; + ul_TimerValue + = + ul_TimerValue + - + 2; + if (b_PCIInputClock != APCI1710_40MHZ) { + ul_TimerValue + = + (ULONG) + ( + (double) + (ul_TimerValue) + * + 0.99392); + } + + break; + + /******/ + /* ms */ + /******/ + + case 2: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_TimerValue + = + ul_TimingInterval + * + (1000 + * + b_PCIInputClock); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_TimingInterval * (1000.0 * (double)b_PCIInputClock)) >= ((double)((double)ul_TimerValue + 0.5))) { + ul_TimerValue + = + ul_TimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + ul_RealTimingInterval + = + (ULONG) + (ul_TimerValue + / + (1000.0 * (double)b_PCIInputClock)); + d_RealTimingInterval + = + (double) + ul_TimerValue + / + (1000.0 + * + (double) + b_PCIInputClock); + + if ((double)((double)ul_TimerValue / (1000.0 * (double)b_PCIInputClock)) >= (double)((double)ul_RealTimingInterval + 0.5)) { + ul_RealTimingInterval + = + ul_RealTimingInterval + + + 1; + } + + ul_TimingInterval + = + ul_TimingInterval + - + 1; + ul_TimerValue + = + ul_TimerValue + - + 2; + if (b_PCIInputClock != APCI1710_40MHZ) { + ul_TimerValue + = + (ULONG) + ( + (double) + (ul_TimerValue) + * + 0.99392); + } + + break; + + /*****/ + /* s */ + /*****/ + + case 3: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_TimerValue + = + (ULONG) + (ul_TimingInterval + * + (1000000.0 + * + b_PCIInputClock)); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_TimingInterval * (1000000.0 * (double)b_PCIInputClock)) >= ((double)((double)ul_TimerValue + 0.5))) { + ul_TimerValue + = + ul_TimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + ul_RealTimingInterval + = + (ULONG) + (ul_TimerValue + / + (1000000.0 + * + (double) + b_PCIInputClock)); + d_RealTimingInterval + = + (double) + ul_TimerValue + / + (1000000.0 + * + (double) + b_PCIInputClock); + + if ((double)((double)ul_TimerValue / (1000000.0 * (double)b_PCIInputClock)) >= (double)((double)ul_RealTimingInterval + 0.5)) { + ul_RealTimingInterval + = + ul_RealTimingInterval + + + 1; + } + + ul_TimingInterval + = + ul_TimingInterval + - + 1; + ul_TimerValue + = + ul_TimerValue + - + 2; + if (b_PCIInputClock != APCI1710_40MHZ) { + ul_TimerValue + = + (ULONG) + ( + (double) + (ul_TimerValue) + * + 0.99392); + } + + break; + + /******/ + /* mn */ + /******/ + + case 4: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_TimerValue + = + (ULONG) + ( + (ul_TimingInterval + * + 60) + * + (1000000.0 + * + b_PCIInputClock)); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)(ul_TimingInterval * 60.0) * (1000000.0 * (double)b_PCIInputClock)) >= ((double)((double)ul_TimerValue + 0.5))) { + ul_TimerValue + = + ul_TimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + ul_RealTimingInterval + = + (ULONG) + (ul_TimerValue + / + (1000000.0 + * + (double) + b_PCIInputClock)) + / + 60; + d_RealTimingInterval + = + ( + (double) + ul_TimerValue + / + (0.001 * (double)b_PCIInputClock)) / 60.0; + + if ((double)(((double)ul_TimerValue / (1000000.0 * (double)b_PCIInputClock)) / 60.0) >= (double)((double)ul_RealTimingInterval + 0.5)) { + ul_RealTimingInterval + = + ul_RealTimingInterval + + + 1; + } + + ul_TimingInterval + = + ul_TimingInterval + - + 1; + ul_TimerValue + = + ul_TimerValue + - + 2; + if (b_PCIInputClock != APCI1710_40MHZ) { + ul_TimerValue + = + (ULONG) + ( + (double) + (ul_TimerValue) + * + 0.99392); + } + + break; + } + + fpu_end(); + + /****************************/ + /* Save the PCI input clock */ + /****************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_ChronoModuleInfo. + b_PCIInputClock + = + b_PCIInputClock; + + /*************************/ + /* Save the timing unity */ + /*************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_ChronoModuleInfo. + b_TimingUnit + = + b_TimingUnit; + + /************************/ + /* Save the base timing */ + /************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_ChronoModuleInfo. + d_TimingInterval + = + d_RealTimingInterval; + + /****************************/ + /* Set the chronometer mode */ + /****************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_ChronoModuleInfo. + dw_ConfigReg + = + dw_ModeArray + [b_ChronoMode]; + + /***********************/ + /* Test if 40 MHz used */ + /***********************/ + + if (b_PCIInputClock == APCI1710_40MHZ) { + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_ChronoModuleInfo. + dw_ConfigReg + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_ChronoModuleInfo. + dw_ConfigReg + | + 0x80; + } + + outl(devpriv->s_ModuleInfo[b_ModulNbr].s_ChronoModuleInfo.dw_ConfigReg, devpriv->s_BoardInfos.ui_Address + 16 + (64 * b_ModulNbr)); + + /***********************/ + /* Write timer 0 value */ + /***********************/ + + outl(ul_TimerValue, devpriv->s_BoardInfos.ui_Address + (64 * b_ModulNbr)); + + /*********************/ + /* Chronometer init. */ + /*********************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_ChronoModuleInfo. + b_ChronoInit + = + 1; + } else { + /***********************************************/ + /* TOR version error for 40MHz clock selection */ + /***********************************************/ + + DPRINTK("TOR version error for 40MHz clock selection\n"); + i_ReturnValue + = + -9; + } + } else { + /**************************************************************/ + /* You can not used the 40MHz clock selection wich this board */ + /**************************************************************/ + + DPRINTK("You can not used the 40MHz clock selection wich this board\n"); + i_ReturnValue = + -8; + } + } else { + /**********************************/ + /* Base timing selection is wrong */ + /**********************************/ + + DPRINTK("Base timing selection is wrong\n"); + i_ReturnValue = -7; + } + } // if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) + else { + /***********************************/ + /* Timing unity selection is wrong */ + /***********************************/ + + DPRINTK("Timing unity selection is wrong\n"); + i_ReturnValue = -6; + } // if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) + } // if ((b_PCIInputClock == APCI1710_30MHZ) || (b_PCIInputClock == APCI1710_33MHZ)) + else { + /*****************************************/ + /* The selected PCI input clock is wrong */ + /*****************************************/ + + DPRINTK("The selected PCI input clock is wrong\n"); + i_ReturnValue = -5; + } // if ((b_PCIInputClock == APCI1710_30MHZ) || (b_PCIInputClock == APCI1710_33MHZ)) + } // if (b_ChronoMode >= 0 && b_ChronoMode <= 7) + else { + /***************************************/ + /* Chronometer mode selection is wrong */ + /***************************************/ + + DPRINTK("Chronometer mode selection is wrong\n"); + i_ReturnValue = -4; + } // if (b_ChronoMode >= 0 && b_ChronoMode <= 7) + } else { + /******************************************/ + /* The module is not a Chronometer module */ + /******************************************/ + + DPRINTK("The module is not a Chronometer module\n"); + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + data[0] = ul_RealTimingInterval; + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_EnableChrono | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_CycleMode, | +| BYTE_ b_InterruptEnable) +INT i_APCI1710_InsnWriteEnableDisableChrono(comedi_device *dev, +comedi_subdevice *s,comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Enable the chronometer from selected module | +| (b_ModulNbr). You must calling the | +| "i_APCI1710_InitChrono" function be for you call this | +| function. | +| If you enable the chronometer interrupt, the | +| chronometer generate a interrupt after the stop signal.| +| See function "i_APCI1710_SetBoardIntRoutineX" and the | +| Interrupt mask description chapter from this manual. | +| The b_CycleMode parameter determine if you will | +| measured a single or more cycle. + +| Disable the chronometer from selected module | +| (b_ModulNbr). If you disable the chronometer after a | +| start signal occur and you restart the chronometer | +| witch the " i_APCI1710_EnableChrono" function, if no | +| stop signal occur this start signal is ignored. ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr CR_AREF(chanspec) : Selected module number (0 to 3) | + data[0] ENABle/Disable chrono +| BYTE_ b_CycleMode : Selected the chronometer | +| data[1] acquisition mode | +| BYTE_ b_InterruptEnable : Enable or disable the | +| data[2] chronometer interrupt. | +| APCI1710_ENABLE: | +| Enable the chronometer | +| interrupt | +| APCI1710_DISABLE: | +| Disable the chronometer | +| interrupt | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection wrong | +| -3: The module is not a Chronometer module | +| -4: Chronometer not initialised see function | +| "i_APCI1710_InitChrono" | +| -5: Chronometer acquisition mode cycle is wrong | +| -6: Interrupt parameter is wrong | +| -7: Interrupt function not initialised. | +| See function "i_APCI1710_SetBoardIntRoutineX" + -8: data[0] wrong input | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnWriteEnableDisableChrono(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = 0; + BYTE b_ModulNbr, b_CycleMode, b_InterruptEnable, b_Action; + b_ModulNbr = CR_AREF(insn->chanspec); + b_Action = (BYTE) data[0]; + b_CycleMode = (BYTE) data[1]; + b_InterruptEnable = (BYTE) data[2]; + i_ReturnValue = insn->n; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /***********************/ + /* Test if chronometer */ + /***********************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_CHRONOMETER) { + /***********************************/ + /* Test if chronometer initialised */ + /***********************************/ + + if (devpriv->s_ModuleInfo[b_ModulNbr]. + s_ChronoModuleInfo.b_ChronoInit == 1) { + + switch (b_Action) { + + case APCI1710_ENABLE: + + /*********************************/ + /* Test the cycle mode parameter */ + /*********************************/ + + if ((b_CycleMode == APCI1710_SINGLE) + || (b_CycleMode == + APCI1710_CONTINUOUS)) { + /***************************/ + /* Test the interrupt flag */ + /***************************/ + + if ((b_InterruptEnable == + APCI1710_ENABLE) + || (b_InterruptEnable == + APCI1710_DISABLE)) + { + + /***************************/ + /* Save the interrupt flag */ + /***************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_ChronoModuleInfo. + b_InterruptMask + = + b_InterruptEnable; + + /***********************/ + /* Save the cycle mode */ + /***********************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_ChronoModuleInfo. + b_CycleMode = + b_CycleMode; + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_ChronoModuleInfo. + dw_ConfigReg = + (devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_ChronoModuleInfo. + dw_ConfigReg & + 0x8F) | ((1 & + b_InterruptEnable) + << 5) | ((1 & + b_CycleMode) + << 6) | 0x10; + + /*****************************/ + /* Test if interrupt enabled */ + /*****************************/ + + if (b_InterruptEnable == + APCI1710_ENABLE) + { + /****************************/ + /* Clear the interrupt flag */ + /****************************/ + + outl(devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_ChronoModuleInfo. + dw_ConfigReg, + devpriv-> + s_BoardInfos. + ui_Address + + 32 + + (64 * b_ModulNbr)); + devpriv->tsk_Current = current; // Save the current process task structure + } + + /***********************************/ + /* Enable or disable the interrupt */ + /* Enable the chronometer */ + /***********************************/ + + outl(devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_ChronoModuleInfo. + dw_ConfigReg, + devpriv-> + s_BoardInfos. + ui_Address + + 16 + + (64 * b_ModulNbr)); + + /*************************/ + /* Clear status register */ + /*************************/ + + outl(0, devpriv-> + s_BoardInfos. + ui_Address + + 36 + + (64 * b_ModulNbr)); + + } // if ((b_InterruptEnable == APCI1710_ENABLE) || (b_InterruptEnable == APCI1710_DISABLE)) + else { + /********************************/ + /* Interrupt parameter is wrong */ + /********************************/ + + DPRINTK("Interrupt parameter is wrong\n"); + i_ReturnValue = -6; + } // if ((b_InterruptEnable == APCI1710_ENABLE) || (b_InterruptEnable == APCI1710_DISABLE)) + } // if ((b_CycleMode == APCI1710_SINGLE) || (b_CycleMode == APCI1710_CONTINUOUS)) + else { + /***********************************************/ + /* Chronometer acquisition mode cycle is wrong */ + /***********************************************/ + + DPRINTK("Chronometer acquisition mode cycle is wrong\n"); + i_ReturnValue = -5; + } // if ((b_CycleMode == APCI1710_SINGLE) || (b_CycleMode == APCI1710_CONTINUOUS)) + break; + + case APCI1710_DISABLE: + + devpriv->s_ModuleInfo[b_ModulNbr]. + s_ChronoModuleInfo. + b_InterruptMask = 0; + + devpriv->s_ModuleInfo[b_ModulNbr]. + s_ChronoModuleInfo. + dw_ConfigReg = + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_ChronoModuleInfo. + dw_ConfigReg & 0x2F; + + /***************************/ + /* Disable the interrupt */ + /* Disable the chronometer */ + /***************************/ + + outl(devpriv->s_ModuleInfo[b_ModulNbr]. + s_ChronoModuleInfo.dw_ConfigReg, + devpriv->s_BoardInfos. + ui_Address + 16 + + (64 * b_ModulNbr)); + + /***************************/ + /* Test if continuous mode */ + /***************************/ + + if (devpriv->s_ModuleInfo[b_ModulNbr]. + s_ChronoModuleInfo. + b_CycleMode == + APCI1710_CONTINUOUS) { + /*************************/ + /* Clear status register */ + /*************************/ + + outl(0, devpriv->s_BoardInfos. + ui_Address + 36 + + (64 * b_ModulNbr)); + } + break; + + default: + DPRINTK("Inputs wrong! Enable or Disable chrono\n"); + i_ReturnValue = -8; + } // switch ENABLE/DISABLE + } else { + /*******************************/ + /* Chronometer not initialised */ + /*******************************/ + + DPRINTK("Chronometer not initialised\n"); + i_ReturnValue = -4; + } + } else { + /******************************************/ + /* The module is not a Chronometer module */ + /******************************************/ + + DPRINTK("The module is not a Chronometer module\n"); + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name :INT i_APCI1710_InsnReadChrono(comedi_device *dev,comedi_subdevice *s, +comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Read functions for Timer | ++----------------------------------------------------------------------------+ +| Input Parameters : ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnReadChrono(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + BYTE b_ReadType; + INT i_ReturnValue = insn->n; + + b_ReadType = CR_CHAN(insn->chanspec); + + switch (b_ReadType) { + case APCI1710_CHRONO_PROGRESS_STATUS: + i_ReturnValue = i_APCI1710_GetChronoProgressStatus(dev, + (BYTE) CR_AREF(insn->chanspec), (PBYTE) & data[0]); + break; + + case APCI1710_CHRONO_READVALUE: + i_ReturnValue = i_APCI1710_ReadChronoValue(dev, + (BYTE) CR_AREF(insn->chanspec), + (UINT) insn->unused[0], + (PBYTE) & data[0], (PULONG) & data[1]); + break; + + case APCI1710_CHRONO_CONVERTVALUE: + i_ReturnValue = i_APCI1710_ConvertChronoValue(dev, + (BYTE) CR_AREF(insn->chanspec), + (ULONG) insn->unused[0], + (PULONG) & data[0], + (PBYTE) & data[1], + (PBYTE) & data[2], + (PUINT) & data[3], + (PUINT) & data[4], (PUINT) & data[5]); + break; + + case APCI1710_CHRONO_READINTERRUPT: + printk("In Chrono Read Interrupt\n"); + + data[0] = devpriv->s_InterruptParameters. + s_FIFOInterruptParameters[devpriv-> + s_InterruptParameters.ui_Read].b_OldModuleMask; + data[1] = devpriv->s_InterruptParameters. + s_FIFOInterruptParameters[devpriv-> + s_InterruptParameters.ui_Read].ul_OldInterruptMask; + data[2] = devpriv->s_InterruptParameters. + s_FIFOInterruptParameters[devpriv-> + s_InterruptParameters.ui_Read].ul_OldCounterLatchValue; + + /**************************/ + /* Increment the read FIFO */ + /***************************/ + + devpriv-> + s_InterruptParameters. + ui_Read = (devpriv-> + s_InterruptParameters. + ui_Read + 1) % APCI1710_SAVE_INTERRUPT; + break; + + default: + printk("ReadType Parameter wrong\n"); + } + + if (i_ReturnValue >= 0) + i_ReturnValue = insn->n; + return (i_ReturnValue); + +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_GetChronoProgressStatus | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| PBYTE_ pb_ChronoStatus) | ++----------------------------------------------------------------------------+ +| Task : Return the chronometer status (pb_ChronoStatus) from | +| selected chronometer module (b_ModulNbr). | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Selected module number (0 to 3) | ++----------------------------------------------------------------------------+ +| Output Parameters : PULONG_ pb_ChronoStatus : Return the chronometer | +| status. | +| 0 : Measurement not started.| +| No start signal occur. | +| 1 : Measurement started. | +| A start signal occur. | +| 2 : Measurement stopped. | +| A stop signal occur. | +| The measurement is | +| terminate. | +| 3: A overflow occur. You | +| must change the base | +| timing witch the | +| function | +| "i_APCI1710_InitChrono" | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection wrong | +| -3: The module is not a Chronometer module | +| -4: Chronometer not initialised see function | +| "i_APCI1710_InitChrono" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_GetChronoProgressStatus(comedi_device * dev, + BYTE b_ModulNbr, PBYTE pb_ChronoStatus) +{ + INT i_ReturnValue = 0; + DWORD dw_Status; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /***********************/ + /* Test if chronometer */ + /***********************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_CHRONOMETER) { + /***********************************/ + /* Test if chronometer initialised */ + /***********************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_ChronoModuleInfo.b_ChronoInit == 1) { + + dw_Status = inl(devpriv->s_BoardInfos. + ui_Address + 8 + (64 * b_ModulNbr)); + + /********************/ + /* Test if overflow */ + /********************/ + + if ((dw_Status & 8) == 8) { + /******************/ + /* Overflow occur */ + /******************/ + + *pb_ChronoStatus = 3; + } // if ((dw_Status & 8) == 8) + else { + /*******************************/ + /* Test if measurement stopped */ + /*******************************/ + + if ((dw_Status & 2) == 2) { + /***********************/ + /* A stop signal occur */ + /***********************/ + + *pb_ChronoStatus = 2; + } // if ((dw_Status & 2) == 2) + else { + /*******************************/ + /* Test if measurement started */ + /*******************************/ + + if ((dw_Status & 1) == 1) { + /************************/ + /* A start signal occur */ + /************************/ + + *pb_ChronoStatus = 1; + } // if ((dw_Status & 1) == 1) + else { + /***************************/ + /* Measurement not started */ + /***************************/ + + *pb_ChronoStatus = 0; + } // if ((dw_Status & 1) == 1) + } // if ((dw_Status & 2) == 2) + } // if ((dw_Status & 8) == 8) + } else { + /*******************************/ + /* Chronometer not initialised */ + /*******************************/ + DPRINTK("Chronometer not initialised\n"); + i_ReturnValue = -4; + } + } else { + /******************************************/ + /* The module is not a Chronometer module */ + /******************************************/ + DPRINTK("The module is not a Chronometer module\n"); + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_ReadChronoValue | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| UINT_ ui_TimeOut, | +| PBYTE_ pb_ChronoStatus, | +| PULONG_ pul_ChronoValue) | ++----------------------------------------------------------------------------+ +| Task : Return the chronometer status (pb_ChronoStatus) and the| +| timing value (pul_ChronoValue) after a stop signal | +| occur from selected chronometer module (b_ModulNbr). | +| This function are only avaible if you have disabled | +| the interrupt functionality. See function | +| "i_APCI1710_EnableChrono" and the Interrupt mask | +| description chapter. | +| You can test the chronometer status witch the | +| "i_APCI1710_GetChronoProgressStatus" function. | +| | +| The returned value from pul_ChronoValue parameter is | +| not real measured timing. | +| You must used the "i_APCI1710_ConvertChronoValue" | +| function or make this operation for calculate the | +| timing: | +| | +| Timing = pul_ChronoValue * pul_RealTimingInterval. | +| | +| pul_RealTimingInterval is the returned parameter from | +| "i_APCI1710_InitChrono" function and the time unity is | +| the b_TimingUnit from "i_APCI1710_InitChrono" function| ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Selected module number (0 to 3) | ++----------------------------------------------------------------------------+ +| Output Parameters : PULONG_ pb_ChronoStatus : Return the chronometer | +| status. | +| 0 : Measurement not started.| +| No start signal occur. | +| 1 : Measurement started. | +| A start signal occur. | +| 2 : Measurement stopped. | +| A stop signal occur. | +| The measurement is | +| terminate. | +| 3: A overflow occur. You | +| must change the base | +| timing witch the | +| function | +| "i_APCI1710_InitChrono" | +| PULONG pul_ChronoValue : Chronometer timing value. | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection wrong | +| -3: The module is not a Chronometer module | +| -4: Chronometer not initialised see function | +| "i_APCI1710_InitChrono" | +| -5: Timeout parameter is wrong (0 to 65535) | +| -6: Interrupt routine installed. You can not read | +| directly the chronometer measured timing. | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_ReadChronoValue(comedi_device * dev, + BYTE b_ModulNbr, + UINT ui_TimeOut, PBYTE pb_ChronoStatus, PULONG pul_ChronoValue) +{ + INT i_ReturnValue = 0; + DWORD dw_Status; + DWORD dw_TimeOut = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /***********************/ + /* Test if chronometer */ + /***********************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_CHRONOMETER) { + /***********************************/ + /* Test if chronometer initialised */ + /***********************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_ChronoModuleInfo.b_ChronoInit == 1) { + /*****************************/ + /* Test the timout parameter */ + /*****************************/ + + if ((ui_TimeOut >= 0) + && (ui_TimeOut <= 65535UL)) { + + for (;;) { + /*******************/ + /* Read the status */ + /*******************/ + + dw_Status = + inl(devpriv-> + s_BoardInfos. + ui_Address + 8 + + (64 * b_ModulNbr)); + + /********************/ + /* Test if overflow */ + /********************/ + + if ((dw_Status & 8) == 8) { + /******************/ + /* Overflow occur */ + /******************/ + + *pb_ChronoStatus = 3; + + /***************************/ + /* Test if continuous mode */ + /***************************/ + + if (devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_ChronoModuleInfo. + b_CycleMode == + APCI1710_CONTINUOUS) + { + /*************************/ + /* Clear status register */ + /*************************/ + + outl(0, devpriv->s_BoardInfos.ui_Address + 36 + (64 * b_ModulNbr)); + } + + break; + } // if ((dw_Status & 8) == 8) + else { + /*******************************/ + /* Test if measurement stopped */ + /*******************************/ + + if ((dw_Status & 2) == + 2) { + /***********************/ + /* A stop signal occur */ + /***********************/ + + *pb_ChronoStatus + = 2; + + /***************************/ + /* Test if continnous mode */ + /***************************/ + + if (devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_ChronoModuleInfo. + b_CycleMode + == + APCI1710_CONTINUOUS) + { + /*************************/ + /* Clear status register */ + /*************************/ + + outl(0, devpriv->s_BoardInfos.ui_Address + 36 + (64 * b_ModulNbr)); + } + break; + } // if ((dw_Status & 2) == 2) + else { + /*******************************/ + /* Test if measurement started */ + /*******************************/ + + if ((dw_Status & 1) == 1) { + /************************/ + /* A start signal occur */ + /************************/ + + *pb_ChronoStatus + = + 1; + } // if ((dw_Status & 1) == 1) + else { + /***************************/ + /* Measurement not started */ + /***************************/ + + *pb_ChronoStatus + = + 0; + } // if ((dw_Status & 1) == 1) + } // if ((dw_Status & 2) == 2) + } // if ((dw_Status & 8) == 8) + + if (dw_TimeOut == ui_TimeOut) { + /*****************/ + /* Timeout occur */ + /*****************/ + + break; + } else { + /*************************/ + /* Increment the timeout */ + /*************************/ + + dw_TimeOut = + dw_TimeOut + 1; + mdelay(1000); + + } + } // for (;;) + + /*****************************/ + /* Test if stop signal occur */ + /*****************************/ + + if (*pb_ChronoStatus == 2) { + /**********************************/ + /* Read the measured timing value */ + /**********************************/ + + *pul_ChronoValue = + inl(devpriv-> + s_BoardInfos. + ui_Address + 4 + + (64 * b_ModulNbr)); + + if (*pul_ChronoValue != 0) { + *pul_ChronoValue = + *pul_ChronoValue + - 1; + } + } else { + /*************************/ + /* Test if timeout occur */ + /*************************/ + + if ((*pb_ChronoStatus != 3) + && (dw_TimeOut == + ui_TimeOut) + && (ui_TimeOut != 0)) { + /*****************/ + /* Timeout occur */ + /*****************/ + + *pb_ChronoStatus = 4; + } + } + + } else { + /******************************/ + /* Timeout parameter is wrong */ + /******************************/ + DPRINTK("Timeout parameter is wrong\n"); + i_ReturnValue = -5; + } + } else { + /*******************************/ + /* Chronometer not initialised */ + /*******************************/ + DPRINTK("Chronometer not initialised\n"); + i_ReturnValue = -4; + } + } else { + /******************************************/ + /* The module is not a Chronometer module */ + /******************************************/ + DPRINTK("The module is not a Chronometer module\n"); + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_ConvertChronoValue | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| ULONG_ ul_ChronoValue, | +| PULONG_ pul_Hour, | +| PBYTE_ pb_Minute, | +| PBYTE_ pb_Second, | +| PUINT_ pui_MilliSecond, | +| PUINT_ pui_MicroSecond, | +| PUINT_ pui_NanoSecond) | ++----------------------------------------------------------------------------+ +| Task : Convert the chronometer measured timing | +| (ul_ChronoValue) in to h, mn, s, ms, µs, ns. | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Selected module number (0 to 3)| +| ULONG_ ul_ChronoValue : Measured chronometer timing | +| value. | +| See"i_APCI1710_ReadChronoValue"| ++----------------------------------------------------------------------------+ +| Output Parameters : PULONG_ pul_Hour : Chronometer timing hour | +| PBYTE_ pb_Minute : Chronometer timing minute | +| PBYTE_ pb_Second : Chronometer timing second | +| PUINT_ pui_MilliSecond : Chronometer timing mini | +| second | +| PUINT_ pui_MicroSecond : Chronometer timing micro | +| second | +| PUINT_ pui_NanoSecond : Chronometer timing nano | +| second | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection wrong | +| -3: The module is not a Chronometer module | +| -4: Chronometer not initialised see function | +| "i_APCI1710_InitChrono" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_ConvertChronoValue(comedi_device * dev, + BYTE b_ModulNbr, + ULONG ul_ChronoValue, + PULONG pul_Hour, + PBYTE pb_Minute, + PBYTE pb_Second, + PUINT pui_MilliSecond, PUINT pui_MicroSecond, PUINT pui_NanoSecond) +{ + INT i_ReturnValue = 0; + double d_Hour; + double d_Minute; + double d_Second; + double d_MilliSecond; + double d_MicroSecond; + double d_NanoSecond; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /***********************/ + /* Test if chronometer */ + /***********************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_CHRONOMETER) { + /***********************************/ + /* Test if chronometer initialised */ + /***********************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_ChronoModuleInfo.b_ChronoInit == 1) { + fpu_begin(); + + d_Hour = (double)ul_ChronoValue *(double) + devpriv->s_ModuleInfo[b_ModulNbr]. + s_ChronoModuleInfo.d_TimingInterval; + + switch (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_ChronoModuleInfo.b_TimingUnit) { + case 0: + d_Hour = d_Hour / (double)1000.0; + + case 1: + d_Hour = d_Hour / (double)1000.0; + + case 2: + d_Hour = d_Hour / (double)1000.0; + + case 3: + d_Hour = d_Hour / (double)60.0; + + case 4: + /**********************/ + /* Calculate the hour */ + /**********************/ + + d_Hour = d_Hour / (double)60.0; + *pul_Hour = (ULONG) d_Hour; + + /************************/ + /* Calculate the minute */ + /************************/ + + d_Minute = d_Hour - *pul_Hour; + d_Minute = d_Minute * 60; + *pb_Minute = (BYTE) d_Minute; + + /************************/ + /* Calculate the second */ + /************************/ + + d_Second = d_Minute - *pb_Minute; + d_Second = d_Second * 60; + *pb_Second = (BYTE) d_Second; + + /*****************************/ + /* Calculate the mini second */ + /*****************************/ + + d_MilliSecond = d_Second - *pb_Second; + d_MilliSecond = d_MilliSecond * 1000; + *pui_MilliSecond = (UINT) d_MilliSecond; + + /******************************/ + /* Calculate the micro second */ + /******************************/ + + d_MicroSecond = + d_MilliSecond - + *pui_MilliSecond; + d_MicroSecond = d_MicroSecond * 1000; + *pui_MicroSecond = (UINT) d_MicroSecond; + + /******************************/ + /* Calculate the micro second */ + /******************************/ + + d_NanoSecond = + d_MicroSecond - + *pui_MicroSecond; + d_NanoSecond = d_NanoSecond * 1000; + *pui_NanoSecond = (UINT) d_NanoSecond; + break; + } + + fpu_end(); + } else { + /*******************************/ + /* Chronometer not initialised */ + /*******************************/ + DPRINTK("Chronometer not initialised\n"); + i_ReturnValue = -4; + } + } else { + /******************************************/ + /* The module is not a Chronometer module */ + /******************************************/ + DPRINTK("The module is not a Chronometer module\n"); + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : INT i_APCI1710_InsnBitsChronoDigitalIO(comedi_device *dev,comedi_subdevice *s, + comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Sets the output witch has been passed with the | +| parameter b_Channel. Setting an output means setting an| +| output high. | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Selected module number (0 to 3)| +| BYTE_ b_OutputChannel : Selection from digital output | +| CR_CHAN() channel (0 to 2) | +| 0 : Channel H | +| 1 : Channel A | +| 2 : Channel B | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection wrong | +| -3: The module is not a Chronometer module | +| -4: The selected digital output is wrong | +| -5: Chronometer not initialised see function | +| "i_APCI1710_InitChrono" | ++----------------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_SetChronoChlOff | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_OutputChannel) | ++----------------------------------------------------------------------------+ +| Task : Resets the output witch has been passed with the | +| parameter b_Channel. Resetting an output means setting | +| an output low. | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 + data[0] : Chl ON, Chl OFF , Chl Read , Port Read + +| BYTE_ b_ModulNbr CR_AREF : Selected module number (0 to 3)| +| BYTE_ b_OutputChannel CR_CHAN : Selection from digital output | +| channel (0 to 2) | +| 0 : Channel H | +| 1 : Channel A | +| 2 : Channel B | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection wrong | +| -3: The module is not a Chronometer module | +| -4: The selected digital output is wrong | +| -5: Chronometer not initialised see function | +| "i_APCI1710_InitChrono" | ++----------------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_ReadChronoChlValue | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_InputChannel, | +| PBYTE_ pb_ChannelStatus) | ++----------------------------------------------------------------------------+ +| Task : Return the status from selected digital input | +| (b_InputChannel) from selected chronometer | +| module (b_ModulNbr). | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Selected module number (0 to 3)| +| BYTE_ b_InputChannel : Selection from digital input | +| channel (0 to 2) | +| CR_CHAN() 0 : Channel E | +| 1 : Channel F | +| 2 : Channel G | ++----------------------------------------------------------------------------+ +| Output Parameters : PBYTE_ pb_ChannelStatus : Digital input channel status.| +| data[0] 0 : Channel is not active | +| 1 : Channel is active | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection wrong | +| -3: The module is not a Chronometer module | +| -4: The selected digital input is wrong | +| -5: Chronometer not initialised see function | +| "i_APCI1710_InitChrono" | ++----------------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_ReadChronoPortValue | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| PBYTE_ pb_PortValue) | ++----------------------------------------------------------------------------+ +| Task : Return the status from digital inputs port from | +| selected (b_ModulNbr) chronometer module. | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Selected module number (0 to 3)| ++----------------------------------------------------------------------------+ +| Output Parameters : PBYTE_ pb_PortValue : Digital inputs port status. +| data[0] ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection wrong | +| -3: The module is not a Chronometer module | +| -4: Chronometer not initialised see function | +| "i_APCI1710_InitChrono" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnBitsChronoDigitalIO(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = 0; + BYTE b_ModulNbr, b_OutputChannel, b_InputChannel, b_IOType; + DWORD dw_Status; + PBYTE pb_ChannelStatus; + PBYTE pb_PortValue; + + b_ModulNbr = CR_AREF(insn->chanspec); + i_ReturnValue = insn->n; + b_IOType = (BYTE) data[0]; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /***********************/ + /* Test if chronometer */ + /***********************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_CHRONOMETER) { + /***********************************/ + /* Test if chronometer initialised */ + /***********************************/ + + if (devpriv->s_ModuleInfo[b_ModulNbr]. + s_ChronoModuleInfo.b_ChronoInit == 1) { + /***********************************/ + /* Test the digital output channel */ + /***********************************/ + switch (b_IOType) { + + case APCI1710_CHRONO_SET_CHANNELOFF: + + b_OutputChannel = + (BYTE) CR_CHAN(insn->chanspec); + if (b_OutputChannel <= 2) { + + outl(0, devpriv->s_BoardInfos. + ui_Address + 20 + + (b_OutputChannel * 4) + + (64 * b_ModulNbr)); + } // if ((b_OutputChannel >= 0) && (b_OutputChannel <= 2)) + else { + /****************************************/ + /* The selected digital output is wrong */ + /****************************************/ + + DPRINTK("The selected digital output is wrong\n"); + i_ReturnValue = -4; + + } // if ((b_OutputChannel >= 0) && (b_OutputChannel <= 2)) + + break; + + case APCI1710_CHRONO_SET_CHANNELON: + + b_OutputChannel = + (BYTE) CR_CHAN(insn->chanspec); + if (b_OutputChannel <= 2) { + + outl(1, devpriv->s_BoardInfos. + ui_Address + 20 + + (b_OutputChannel * 4) + + (64 * b_ModulNbr)); + } // if ((b_OutputChannel >= 0) && (b_OutputChannel <= 2)) + else { + /****************************************/ + /* The selected digital output is wrong */ + /****************************************/ + + DPRINTK("The selected digital output is wrong\n"); + i_ReturnValue = -4; + + } // if ((b_OutputChannel >= 0) && (b_OutputChannel <= 2)) + + break; + + case APCI1710_CHRONO_READ_CHANNEL: + /**********************************/ + /* Test the digital input channel */ + /**********************************/ + pb_ChannelStatus = (PBYTE) & data[0]; + b_InputChannel = + (BYTE) CR_CHAN(insn->chanspec); + + if (b_InputChannel <= 2) { + + dw_Status = + inl(devpriv-> + s_BoardInfos. + ui_Address + 12 + + (64 * b_ModulNbr)); + + *pb_ChannelStatus = + (BYTE) (((dw_Status >> + b_InputChannel) + & 1) ^ 1); + } // if ((b_InputChannel >= 0) && (b_InputChannel <= 2)) + else { + /***************************************/ + /* The selected digital input is wrong */ + /***************************************/ + + DPRINTK("The selected digital input is wrong\n"); + i_ReturnValue = -4; + } // if ((b_InputChannel >= 0) && (b_InputChannel <= 2)) + + break; + + case APCI1710_CHRONO_READ_PORT: + + pb_PortValue = (PBYTE) & data[0]; + + dw_Status = + inl(devpriv->s_BoardInfos. + ui_Address + 12 + + (64 * b_ModulNbr)); + + *pb_PortValue = + (BYTE) ((dw_Status & 0x7) ^ 7); + break; + } + } else { + /*******************************/ + /* Chronometer not initialised */ + /*******************************/ + + DPRINTK("Chronometer not initialised\n"); + i_ReturnValue = -5; + } + } else { + /******************************************/ + /* The module is not a Chronometer module */ + /******************************************/ + + DPRINTK("The module is not a Chronometer module\n"); + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.h @@ -0,0 +1,85 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ + +#define APCI1710_30MHZ 30 +#define APCI1710_33MHZ 33 +#define APCI1710_40MHZ 40 + +#define APCI1710_SINGLE 0 +#define APCI1710_CONTINUOUS 1 + +#define APCI1710_CHRONO_PROGRESS_STATUS 0 +#define APCI1710_CHRONO_READVALUE 1 +#define APCI1710_CHRONO_CONVERTVALUE 2 +#define APCI1710_CHRONO_READINTERRUPT 3 + +#define APCI1710_CHRONO_SET_CHANNELON 0 +#define APCI1710_CHRONO_SET_CHANNELOFF 1 +#define APCI1710_CHRONO_READ_CHANNEL 2 +#define APCI1710_CHRONO_READ_PORT 3 + +/* ++----------------------------------------------------------------------------+ +| CHRONOMETER INISIALISATION FUNCTION | ++----------------------------------------------------------------------------+ + */ + +INT i_APCI1710_InsnConfigInitChrono(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +INT i_APCI1710_InsnWriteEnableDisableChrono(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + +/* ++----------------------------------------------------------------------------+ +| CHRONOMETER READ FUNCTION | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnReadChrono(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +INT i_APCI1710_GetChronoProgressStatus(comedi_device * dev, + BYTE b_ModulNbr, PBYTE pb_ChronoStatus); + +INT i_APCI1710_ReadChronoValue(comedi_device * dev, + BYTE b_ModulNbr, + UINT ui_TimeOut, PBYTE pb_ChronoStatus, PULONG pul_ChronoValue); + +INT i_APCI1710_ConvertChronoValue(comedi_device * dev, + BYTE b_ModulNbr, + ULONG ul_ChronoValue, + PULONG pul_Hour, + PBYTE pb_Minute, + PBYTE pb_Second, + PUINT pui_MilliSecond, PUINT pui_MicroSecond, PUINT pui_NanoSecond); + +/* ++----------------------------------------------------------------------------+ +| CHRONOMETER DIGITAL INPUT OUTPUT FUNCTION | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnBitsChronoDigitalIO(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.c @@ -0,0 +1,1020 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-----------------------------------------------------------------------+ + | Project : API APCI1710 | Compiler : gcc | + | Module name : DIG_IO.C | Version : 2.96 | + +-------------------------------+---------------------------------------+ + | Project manager: Eric Stolz | Date : 02/12/2002 | + +-----------------------------------------------------------------------+ + | Description : APCI-1710 digital I/O module | + | | + | | + +-----------------------------------------------------------------------+ + | UPDATES | + +-----------------------------------------------------------------------+ + | Date | Author | Description of updates | + +----------+-----------+------------------------------------------------+ + | 16/06/98 | S. Weber | Digital input / output implementation | + |----------|-----------|------------------------------------------------| + | 08/05/00 | Guinot C | - 0400/0228 All Function in RING 0 | + | | | available | + +-----------------------------------------------------------------------+ + | | | | + | | | | + +-----------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Included files | ++----------------------------------------------------------------------------+ +*/ +#include "APCI1710_Dig_io.h" + +/* ++----------------------------------------------------------------------------+ +| Function Name : INT i_APCI1710_InsnConfigDigitalIO(comedi_device *dev, | +| comedi_subdevice *s,comedi_insn *insn,lsampl_t *data)| ++----------------------------------------------------------------------------+ +| Task : Configure the digital I/O operating mode from selected | +| module (b_ModulNbr). You must calling this function be| +| for you call any other function witch access of digital| +| I/O. | ++----------------------------------------------------------------------------+ +| Input Parameters : | +| BYTE_ b_ModulNbr data[0]: Module number to | +| configure (0 to 3) | +| BYTE_ b_ChannelAMode data[1] : Channel A mode selection | +| 0 : Channel used for digital | +| input | +| 1 : Channel used for digital | +| output | +| BYTE_ b_ChannelBMode data[2] : Channel B mode selection | +| 0 : Channel used for digital | +| input | +| 1 : Channel used for digital | +| output | + data[0] memory on/off +Activates and deactivates the digital output memory. + After having | +| called up this function with memory on,the output you have previously| +| activated with the function are not reset ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: The module parameter is wrong | +| -3: The module is not a digital I/O module | +| -4: Bi-directional channel A configuration error | +| -5: Bi-directional channel B configuration error | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnConfigDigitalIO(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + BYTE b_ModulNbr, b_ChannelAMode, b_ChannelBMode; + BYTE b_MemoryOnOff, b_ConfigType; + INT i_ReturnValue = 0; + DWORD dw_WriteConfig = 0; + + b_ModulNbr = (BYTE) CR_AREF(insn->chanspec); + b_ConfigType = (BYTE) data[0]; // Memory or Init + b_ChannelAMode = (BYTE) data[1]; + b_ChannelBMode = (BYTE) data[2]; + b_MemoryOnOff = (BYTE) data[1]; // if memory operation + i_ReturnValue = insn->n; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr >= 4) { + DPRINTK("Module Number invalid\n"); + i_ReturnValue = -2; + return i_ReturnValue; + } + switch (b_ConfigType) { + case APCI1710_DIGIO_MEMORYONOFF: + + if (b_MemoryOnOff) // If Memory ON + { + /****************************/ + /* Set the output memory on */ + /****************************/ + + devpriv->s_ModuleInfo[b_ModulNbr]. + s_DigitalIOInfo.b_OutputMemoryEnabled = 1; + + /***************************/ + /* Clear the output memory */ + /***************************/ + devpriv->s_ModuleInfo[b_ModulNbr]. + s_DigitalIOInfo.dw_OutputMemory = 0; + } else // If memory off + { + /*****************************/ + /* Set the output memory off */ + /*****************************/ + + devpriv->s_ModuleInfo[b_ModulNbr]. + s_DigitalIOInfo.b_OutputMemoryEnabled = 0; + } + break; + + case APCI1710_DIGIO_INIT: + + /*******************************/ + /* Test if digital I/O counter */ + /*******************************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_DIGITAL_IO) { + + /***************************************************/ + /* Test the bi-directional channel A configuration */ + /***************************************************/ + + if ((b_ChannelAMode == 0) || (b_ChannelAMode == 1)) { + /***************************************************/ + /* Test the bi-directional channel B configuration */ + /***************************************************/ + + if ((b_ChannelBMode == 0) + || (b_ChannelBMode == 1)) { + devpriv->s_ModuleInfo[b_ModulNbr]. + s_DigitalIOInfo.b_DigitalInit = + 1; + + /********************************/ + /* Save channel A configuration */ + /********************************/ + + devpriv->s_ModuleInfo[b_ModulNbr]. + s_DigitalIOInfo. + b_ChannelAMode = b_ChannelAMode; + + /********************************/ + /* Save channel B configuration */ + /********************************/ + + devpriv->s_ModuleInfo[b_ModulNbr]. + s_DigitalIOInfo. + b_ChannelBMode = b_ChannelBMode; + + /*****************************************/ + /* Set the channel A and B configuration */ + /*****************************************/ + + dw_WriteConfig = + (DWORD) (b_ChannelAMode | + (b_ChannelBMode * 2)); + + /***************************/ + /* Write the configuration */ + /***************************/ + + outl(dw_WriteConfig, + devpriv->s_BoardInfos. + ui_Address + 4 + + (64 * b_ModulNbr)); + + } else { + /************************************************/ + /* Bi-directional channel B configuration error */ + /************************************************/ + DPRINTK("Bi-directional channel B configuration error\n"); + i_ReturnValue = -5; + } + + } else { + /************************************************/ + /* Bi-directional channel A configuration error */ + /************************************************/ + DPRINTK("Bi-directional channel A configuration error\n"); + i_ReturnValue = -4; + + } + + } else { + /******************************************/ + /* The module is not a digital I/O module */ + /******************************************/ + DPRINTK("The module is not a digital I/O module\n"); + i_ReturnValue = -3; + } + } // end of Switch + printk("Return Value %d\n", i_ReturnValue); + return i_ReturnValue; +} + +/* ++----------------------------------------------------------------------------+ +| INPUT FUNCTIONS | ++----------------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ + +|INT i_APCI1710_InsnReadDigitalIOChlValue(comedi_device *dev,comedi_subdevice +*s, comedi_insn *insn,lsampl_t *data) + ++----------------------------------------------------------------------------+ +| Task : Read the status from selected digital I/O digital input| +| (b_InputChannel) | ++----------------------------------------------------------------------------| + + +| +| BYTE_ b_ModulNbr CR_AREF(chanspec) : Selected module number | +| (0 to 3) | +| BYTE_ b_InputChannel CR_CHAN(chanspec) : Selection from digital | +| input ( 0 to 6) | +| 0 : Channel C | +| 1 : Channel D | +| 2 : Channel E | +| 3 : Channel F | +| 4 : Channel G | +| 5 : Channel A | +| 6 : Channel B + + + | ++----------------------------------------------------------------------------+ +| Output Parameters : data[0] : Digital input channel | +| status | +| 0 : Channle is not active| +| 1 : Channle is active | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: The module parameter is wrong | +| -3: The module is not a digital I/O module | +| -4: The selected digital I/O digital input is wrong | +| -5: Digital I/O not initialised | +| -6: The digital channel A is used for output | +| -7: The digital channel B is used for output | ++----------------------------------------------------------------------------+ +*/ + +//_INT_ i_APCI1710_ReadDigitalIOChlValue (BYTE_ b_BoardHandle, +// BYTE_ b_ModulNbr, +// BYTE_ b_InputChannel, +// +// PBYTE_ pb_ChannelStatus) +INT i_APCI1710_InsnReadDigitalIOChlValue(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = 0; + DWORD dw_StatusReg; + BYTE b_ModulNbr, b_InputChannel; + PBYTE pb_ChannelStatus; + b_ModulNbr = (BYTE) CR_AREF(insn->chanspec); + b_InputChannel = (BYTE) CR_CHAN(insn->chanspec); + data[0] = 0; + pb_ChannelStatus = (PBYTE) & data[0]; + i_ReturnValue = insn->n; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if digital I/O counter */ + /*******************************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_DIGITAL_IO) { + /******************************************/ + /* Test the digital imnput channel number */ + /******************************************/ + + if (b_InputChannel <= 6) { + /**********************************************/ + /* Test if the digital I/O module initialised */ + /**********************************************/ + + if (devpriv->s_ModuleInfo[b_ModulNbr]. + s_DigitalIOInfo.b_DigitalInit == 1) { + /**********************************/ + /* Test if channel A or channel B */ + /**********************************/ + + if (b_InputChannel > 4) { + /*********************/ + /* Test if channel A */ + /*********************/ + + if (b_InputChannel == 5) { + /***************************/ + /* Test the channel A mode */ + /***************************/ + + if (devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_DigitalIOInfo. + b_ChannelAMode + != 0) { + /********************************************/ + /* The digital channel A is used for output */ + /********************************************/ + + i_ReturnValue = + -6; + } + } // if (b_InputChannel == 5) + else { + /***************************/ + /* Test the channel B mode */ + /***************************/ + + if (devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_DigitalIOInfo. + b_ChannelBMode + != 0) { + /********************************************/ + /* The digital channel B is used for output */ + /********************************************/ + + i_ReturnValue = + -7; + } + } // if (b_InputChannel == 5) + } // if (b_InputChannel > 4) + + /***********************/ + /* Test if error occur */ + /***********************/ + + if (i_ReturnValue >= 0) { + /**************************/ + /* Read all digital input */ + /**************************/ + + //INPDW (ps_APCI1710Variable-> + // s_Board [b_BoardHandle]. + // s_BoardInfos. + // ui_Address + (64 * b_ModulNbr), + // &dw_StatusReg); + + dw_StatusReg = + inl(devpriv-> + s_BoardInfos. + ui_Address + + (64 * b_ModulNbr)); + + *pb_ChannelStatus = + (BYTE) ((dw_StatusReg ^ + 0x1C) >> + b_InputChannel) & 1; + + } // if (i_ReturnValue == 0) + } else { + /*******************************/ + /* Digital I/O not initialised */ + /*******************************/ + DPRINTK("Digital I/O not initialised\n"); + i_ReturnValue = -5; + } + } else { + /********************************/ + /* Selected digital input error */ + /********************************/ + DPRINTK("Selected digital input error\n"); + i_ReturnValue = -4; + } + } else { + /******************************************/ + /* The module is not a digital I/O module */ + /******************************************/ + DPRINTK("The module is not a digital I/O module\n"); + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| OUTPUT FUNCTIONS | ++----------------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Function Name : INT i_APCI1710_InsnWriteDigitalIOChlOnOff(comedi_device +|*dev,comedi_subdevice *s,comedi_insn *insn,lsampl_t *data) + ++----------------------------------------------------------------------------+ +| Task : Sets or resets the output witch has been passed with the | +| parameter b_Channel. Setting an output means setting | +| an ouput high. | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr (aref ) : Selected module number (0 to 3)| +| BYTE_ b_OutputChannel (CR_CHAN) : Selection from digital output | +| channel (0 to 2) | +| 0 : Channel H | +| 1 : Channel A | +| 2 : Channel B | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: The module parameter is wrong | +| -3: The module is not a digital I/O module | +| -4: The selected digital output is wrong | +| -5: digital I/O not initialised see function | +| " i_APCI1710_InitDigitalIO" | +| -6: The digital channel A is used for input | +| -7: The digital channel B is used for input + -8: Digital Output Memory OFF. | +| Use previously the function | +| "i_APCI1710_SetDigitalIOMemoryOn". | ++----------------------------------------------------------------------------+ +*/ + +//_INT_ i_APCI1710_SetDigitalIOChlOn (BYTE_ b_BoardHandle, +// BYTE_ b_ModulNbr, +// BYTE_ b_OutputChannel) +INT i_APCI1710_InsnWriteDigitalIOChlOnOff(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = 0; + DWORD dw_WriteValue = 0; + BYTE b_ModulNbr, b_OutputChannel; + i_ReturnValue = insn->n; + b_ModulNbr = CR_AREF(insn->chanspec); + b_OutputChannel = CR_CHAN(insn->chanspec); + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if digital I/O counter */ + /*******************************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_DIGITAL_IO) { + /**********************************************/ + /* Test if the digital I/O module initialised */ + /**********************************************/ + + if (devpriv->s_ModuleInfo[b_ModulNbr]. + s_DigitalIOInfo.b_DigitalInit == 1) { + /******************************************/ + /* Test the digital output channel number */ + /******************************************/ + + switch (b_OutputChannel) { + /*************/ + /* Channel H */ + /*************/ + + case 0: + break; + + /*************/ + /* Channel A */ + /*************/ + + case 1: + if (devpriv->s_ModuleInfo[b_ModulNbr]. + s_DigitalIOInfo. + b_ChannelAMode != 1) { + /*******************************************/ + /* The digital channel A is used for input */ + /*******************************************/ + + i_ReturnValue = -6; + } + break; + + /*************/ + /* Channel B */ + /*************/ + + case 2: + if (devpriv->s_ModuleInfo[b_ModulNbr]. + s_DigitalIOInfo. + b_ChannelBMode != 1) { + /*******************************************/ + /* The digital channel B is used for input */ + /*******************************************/ + + i_ReturnValue = -7; + } + break; + + default: + /****************************************/ + /* The selected digital output is wrong */ + /****************************************/ + + i_ReturnValue = -4; + break; + } + + /***********************/ + /* Test if error occur */ + /***********************/ + + if (i_ReturnValue >= 0) { + + /*********************************/ + /* Test if set channel ON */ + /*********************************/ + if (data[0]) { + /*********************************/ + /* Test if output memory enabled */ + /*********************************/ + + if (devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_DigitalIOInfo. + b_OutputMemoryEnabled == + 1) { + dw_WriteValue = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_DigitalIOInfo. + dw_OutputMemory + | (1 << + b_OutputChannel); + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_DigitalIOInfo. + dw_OutputMemory + = dw_WriteValue; + } else { + dw_WriteValue = + 1 << + b_OutputChannel; + } + } // set channel off + else { + if (devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_DigitalIOInfo. + b_OutputMemoryEnabled == + 1) { + dw_WriteValue = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_DigitalIOInfo. + dw_OutputMemory + & (0xFFFFFFFFUL + - + (1 << b_OutputChannel)); + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_DigitalIOInfo. + dw_OutputMemory + = dw_WriteValue; + } else { + /*****************************/ + /* Digital Output Memory OFF */ + /*****************************/ + // +Use previously the function "i_APCI1710_SetDigitalIOMemoryOn" + i_ReturnValue = -8; + } + + } + /*******************/ + /* Write the value */ + /*******************/ + + //OUTPDW (ps_APCI1710Variable-> + // s_Board [b_BoardHandle]. + // s_BoardInfos. + // ui_Address + (64 * b_ModulNbr), + // dw_WriteValue); + outl(dw_WriteValue, + devpriv->s_BoardInfos. + ui_Address + (64 * b_ModulNbr)); + } + } else { + /*******************************/ + /* Digital I/O not initialised */ + /*******************************/ + + i_ReturnValue = -5; + } + } else { + /******************************************/ + /* The module is not a digital I/O module */ + /******************************************/ + + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ + +|INT i_APCI1710_InsnBitsDigitalIOPortOnOff(comedi_device *dev,comedi_subdevice + *s, comedi_insn *insn,lsampl_t *data) ++----------------------------------------------------------------------------+ +| Task : write: + Sets or resets one or several outputs from port. | +| Setting an output means setting an output high. | +| If you have switched OFF the digital output memory | +| (OFF), all the other output are set to "0". + +| read: + Read the status from digital input port | +| from selected digital I/O module (b_ModulNbr) ++----------------------------------------------------------------------------+ +| Input Parameters : + BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr CR_AREF(aref) : Selected module number (0 to 3)| +| BYTE_ b_PortValue CR_CHAN(chanspec) : Output Value ( 0 To 7 ) +| data[0] read or write port + data[1] if write then indicate ON or OFF + + if read : data[1] will return port status. ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : + + INPUT : + + 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: The module parameter is wrong | +| -3: The module is not a digital I/O module | +| -4: Digital I/O not initialised + + OUTPUT: 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: The module parameter is wrong | +| -3: The module is not a digital I/O module | +| -4: Output value wrong | +| -5: digital I/O not initialised see function | +| " i_APCI1710_InitDigitalIO" | +| -6: The digital channel A is used for input | +| -7: The digital channel B is used for input + -8: Digital Output Memory OFF. | +| Use previously the function | +| "i_APCI1710_SetDigitalIOMemoryOn". | ++----------------------------------------------------------------------------+ +*/ + +//_INT_ i_APCI1710_SetDigitalIOPortOn (BYTE_ b_BoardHandle, +// BYTE_ b_ModulNbr, +// BYTE_ b_PortValue) +INT i_APCI1710_InsnBitsDigitalIOPortOnOff(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = 0; + DWORD dw_WriteValue = 0; + DWORD dw_StatusReg; + BYTE b_ModulNbr, b_PortValue; + BYTE b_PortOperation, b_PortOnOFF; + + PBYTE pb_PortValue; + + b_ModulNbr = (BYTE) CR_AREF(insn->chanspec); + b_PortOperation = (BYTE) data[0]; // Input or output + b_PortOnOFF = (BYTE) data[1]; // if output then On or Off + b_PortValue = (BYTE) data[2]; // if out put then Value + i_ReturnValue = insn->n; + pb_PortValue = (PBYTE) & data[0]; +// if input then read value + + switch (b_PortOperation) { + case APCI1710_INPUT: + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if digital I/O counter */ + /*******************************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_DIGITAL_IO) { + /**********************************************/ + /* Test if the digital I/O module initialised */ + /**********************************************/ + + if (devpriv->s_ModuleInfo[b_ModulNbr]. + s_DigitalIOInfo.b_DigitalInit == 1) { + /**************************/ + /* Read all digital input */ + /**************************/ + + //INPDW (ps_APCI1710Variable-> + // s_Board [b_BoardHandle]. + // s_BoardInfos. + // ui_Address + (64 * b_ModulNbr), + // &dw_StatusReg); + + dw_StatusReg = + inl(devpriv->s_BoardInfos. + ui_Address + (64 * b_ModulNbr)); + *pb_PortValue = + (BYTE) (dw_StatusReg ^ 0x1C); + + } else { + /*******************************/ + /* Digital I/O not initialised */ + /*******************************/ + + i_ReturnValue = -4; + } + } else { + /******************************************/ + /* The module is not a digital I/O module */ + /******************************************/ + + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + + i_ReturnValue = -2; + } + + break; + + case APCI1710_OUTPUT: + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if digital I/O counter */ + /*******************************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_DIGITAL_IO) { + /**********************************************/ + /* Test if the digital I/O module initialised */ + /**********************************************/ + + if (devpriv->s_ModuleInfo[b_ModulNbr]. + s_DigitalIOInfo.b_DigitalInit == 1) { + /***********************/ + /* Test the port value */ + /***********************/ + + if (b_PortValue <= 7) { + /***********************************/ + /* Test the digital output channel */ + /***********************************/ + + /**************************/ + /* Test if channel A used */ + /**************************/ + + if ((b_PortValue & 2) == 2) { + if (devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_DigitalIOInfo. + b_ChannelAMode + != 1) { + /*******************************************/ + /* The digital channel A is used for input */ + /*******************************************/ + + i_ReturnValue = + -6; + } + } // if ((b_PortValue & 2) == 2) + + /**************************/ + /* Test if channel B used */ + /**************************/ + + if ((b_PortValue & 4) == 4) { + if (devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_DigitalIOInfo. + b_ChannelBMode + != 1) { + /*******************************************/ + /* The digital channel B is used for input */ + /*******************************************/ + + i_ReturnValue = + -7; + } + } // if ((b_PortValue & 4) == 4) + + /***********************/ + /* Test if error occur */ + /***********************/ + + if (i_ReturnValue >= 0) { + + //if(data[1]) + //{ + switch (b_PortOnOFF) { + /*********************************/ + /* Test if set Port ON */ + /*********************************/ + + case APCI1710_ON: + + /*********************************/ + /* Test if output memory enabled */ + /*********************************/ + + if (devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_DigitalIOInfo. + b_OutputMemoryEnabled + == 1) { + dw_WriteValue + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_DigitalIOInfo. + dw_OutputMemory + | + b_PortValue; + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_DigitalIOInfo. + dw_OutputMemory + = + dw_WriteValue; + } else { + dw_WriteValue + = + b_PortValue; + } + break; + + // If Set PORT OFF + case APCI1710_OFF: + + /*********************************/ + /* Test if output memory enabled */ + /*********************************/ + + if (devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_DigitalIOInfo. + b_OutputMemoryEnabled + == 1) { + dw_WriteValue + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_DigitalIOInfo. + dw_OutputMemory + & + (0xFFFFFFFFUL + - + b_PortValue); + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_DigitalIOInfo. + dw_OutputMemory + = + dw_WriteValue; + } else { + /*****************************/ + /* Digital Output Memory OFF */ + /*****************************/ + + i_ReturnValue + = + -8; + } + } // switch + + /*******************/ + /* Write the value */ + /*******************/ + + // OUTPDW (ps_APCI1710Variable-> + // s_Board [b_BoardHandle]. + // s_BoardInfos. + // ui_Address + (64 * b_ModulNbr), + // dw_WriteValue); + outl(dw_WriteValue, + devpriv-> + s_BoardInfos. + ui_Address + + (64 * b_ModulNbr)); + } + } else { + /**********************/ + /* Output value wrong */ + /**********************/ + + i_ReturnValue = -4; + } + } else { + /*******************************/ + /* Digital I/O not initialised */ + /*******************************/ + + i_ReturnValue = -5; + } + } else { + /******************************************/ + /* The module is not a digital I/O module */ + /******************************************/ + + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + + i_ReturnValue = -2; + } + break; + + default: + i_ReturnValue = -9; + DPRINTK("NO INPUT/OUTPUT specified\n"); + } //switch INPUT / OUTPUT + return (i_ReturnValue); +} --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Dig_io.h @@ -0,0 +1,55 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ + +#define APCI1710_ON 1 // Digital Output ON or OFF +#define APCI1710_OFF 0 + +#define APCI1710_INPUT 0 // Digital I/O +#define APCI1710_OUTPUT 1 + +#define APCI1710_DIGIO_MEMORYONOFF 0x10 // +#define APCI1710_DIGIO_INIT 0x11 + +/* ++----------------------------------------------------------------------------+ +| DIGITAL I/O INISIALISATION FUNCTION | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnConfigDigitalIO(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +/* ++----------------------------------------------------------------------------+ +| INPUT OUTPUT FUNCTIONS | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI1710_InsnReadDigitalIOChlValue(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + +INT i_APCI1710_InsnWriteDigitalIOChlOnOff(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + +INT i_APCI1710_InsnBitsDigitalIOPortOnOff(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.c @@ -0,0 +1,5363 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-----------------------------------------------------------------------+ + | Project : API APCI1710 | Compiler : gcc | + | Module name : INC_CPT.C | Version : 2.96 | + +-------------------------------+---------------------------------------+ + | Project manager: Eric Stolz | Date : 02/12/2002 | + +-----------------------------------------------------------------------+ + | Description : APCI-1710 incremental counter module | + | | + | | + +-----------------------------------------------------------------------+ + | UPDATES | + +-----------------------------------------------------------------------+ + | Date | Author | Description of updates | + +----------+-----------+------------------------------------------------+ + | | | | + |----------|-----------|------------------------------------------------| + | 08/05/00 | Guinot C | - 0400/0228 All Function in RING 0 | + | | | available | + +-----------------------------------------------------------------------+ + | 29/06/01 | Guinot C. | - 1100/0231 -> 0701/0232 | + | | | See i_APCI1710_DisableFrequencyMeasurement | + +-----------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Included files | ++----------------------------------------------------------------------------+ +*/ + +#include "APCI1710_INCCPT.h" + +/* ++----------------------------------------------------------------------------+ +| INT i_APCI1710_InsnConfigINCCPT(comedi_device *dev,comedi_subdevice *s, +comedi_insn *insn,lsampl_t *data) + ++----------------------------------------------------------------------------+ +| Task : Configuration function for INC_CPT | ++----------------------------------------------------------------------------+ +| Input Parameters : | ++----------------------------------------------------------------------------+ +| Output Parameters : *data ++----------------------------------------------------------------------------+ +| Return Value : | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnConfigINCCPT(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_ConfigType; + INT i_ReturnValue = 0; + ui_ConfigType = CR_CHAN(insn->chanspec); + + printk("\nINC_CPT"); + + devpriv->tsk_Current = current; // Save the current process task structure + switch (ui_ConfigType) { + case APCI1710_INCCPT_INITCOUNTER: + i_ReturnValue = i_APCI1710_InitCounter(dev, + CR_AREF(insn->chanspec), + (BYTE) data[0], + (BYTE) data[1], + (BYTE) data[2], (BYTE) data[3], (BYTE) data[4]); + break; + + case APCI1710_INCCPT_COUNTERAUTOTEST: + i_ReturnValue = i_APCI1710_CounterAutoTest(dev, + (PBYTE) & data[0]); + break; + + case APCI1710_INCCPT_INITINDEX: + i_ReturnValue = i_APCI1710_InitIndex(dev, + CR_AREF(insn->chanspec), + (BYTE) data[0], + (BYTE) data[1], (BYTE) data[2], (BYTE) data[3]); + break; + + case APCI1710_INCCPT_INITREFERENCE: + i_ReturnValue = i_APCI1710_InitReference(dev, + CR_AREF(insn->chanspec), (BYTE) data[0]); + break; + + case APCI1710_INCCPT_INITEXTERNALSTROBE: + i_ReturnValue = i_APCI1710_InitExternalStrobe(dev, + CR_AREF(insn->chanspec), + (BYTE) data[0], (BYTE) data[1]); + break; + + case APCI1710_INCCPT_INITCOMPARELOGIC: + i_ReturnValue = i_APCI1710_InitCompareLogic(dev, + CR_AREF(insn->chanspec), (UINT) data[0]); + break; + + case APCI1710_INCCPT_INITFREQUENCYMEASUREMENT: + i_ReturnValue = i_APCI1710_InitFrequencyMeasurement(dev, + CR_AREF(insn->chanspec), + (BYTE) data[0], + (BYTE) data[1], (ULONG) data[2], (PULONG) & data[0]); + break; + + default: + printk("Insn Config : Config Parameter Wrong\n"); + + } + + if (i_ReturnValue >= 0) + i_ReturnValue = insn->n; + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_InitCounter | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_CounterRange, | +| BYTE_ b_FirstCounterModus, | +| BYTE_ b_FirstCounterOption, | +| BYTE_ b_SecondCounterModus, | +| BYTE_ b_SecondCounterOption) | ++----------------------------------------------------------------------------+ +| Task : Configure the counter operating mode from selected | +| module (b_ModulNbr). You must calling this function be | +| for you call any other function witch access of | +| counters. | +| | +| Counter range | +| ------------- | +| +------------------------------------+-----------------------------------+ | +| | Parameter Passed value | Description | | +| |------------------------------------+-----------------------------------| | +| |b_ModulNbr APCI1710_16BIT_COUNTER | The module is configured for | | +| | | two 16-bit counter. | | +| | | - b_FirstCounterModus and | | +| | | b_FirstCounterOption | | +| | | configure the first 16 bit | | +| | | counter. | | +| | | - b_SecondCounterModus and | | +| | | b_SecondCounterOption | | +| | | configure the second 16 bit | | +| | | counter. | | +| |------------------------------------+-----------------------------------| | +| |b_ModulNbr APCI1710_32BIT_COUNTER | The module is configured for one | | +| | | 32-bit counter. | | +| | | - b_FirstCounterModus and | | +| | | b_FirstCounterOption | | +| | | configure the 32 bit counter. | | +| | | - b_SecondCounterModus and | | +| | | b_SecondCounterOption | | +| | | are not used and have no | | +| | | importance. | | +| +------------------------------------+-----------------------------------+ | +| | +| Counter operating mode | +| ---------------------- | +| | +| +--------------------+-------------------------+-------------------------+ | +| | Parameter | Passed value | Description | | +| |--------------------+-------------------------+-------------------------| | +| |b_FirstCounterModus | APCI1710_QUADRUPLE_MODE | In the quadruple mode, | | +| | or | | the edge analysis | | +| |b_SecondCounterModus| | circuit generates a | | +| | | | counting pulse from | | +| | | | each edge of 2 signals | | +| | | | which are phase shifted | | +| | | | in relation to each | | +| | | | other. | | +| |--------------------+-------------------------+-------------------------| | +| |b_FirstCounterModus | APCI1710_DOUBLE_MODE | Functions in the same | | +| | or | | way as the quadruple | | +| |b_SecondCounterModus| | mode, except that only | | +| | | | two of the four edges | | +| | | | are analysed per | | +| | | | period | | +| |--------------------+-------------------------+-------------------------| | +| |b_FirstCounterModus | APCI1710_SIMPLE_MODE | Functions in the same | | +| | or | | way as the quadruple | | +| |b_SecondCounterModus| | mode, except that only | | +| | | | one of the four edges | | +| | | | is analysed per | | +| | | | period. | | +| |--------------------+-------------------------+-------------------------| | +| |b_FirstCounterModus | APCI1710_DIRECT_MODE | In the direct mode the | | +| | or | | both edge analysis | | +| |b_SecondCounterModus| | circuits are inactive. | | +| | | | The inputs A, B in the | | +| | | | 32-bit mode or A, B and | | +| | | | C, D in the 16-bit mode | | +| | | | represent, each, one | | +| | | | clock pulse gate circuit| | +| | | | There by frequency and | | +| | | | pulse duration | | +| | | | measurements can be | | +| | | | performed. | | +| +--------------------+-------------------------+-------------------------+ | +| | +| | +| IMPORTANT! | +| If you have configured the module for two 16-bit counter, a mixed | +| mode with a counter in quadruple/double/single mode | +| and the other counter in direct mode is not possible! | +| | +| | +| Counter operating option for quadruple/double/simple mode | +| --------------------------------------------------------- | +| | +| +----------------------+-------------------------+------------------------+| +| | Parameter | Passed value | Description || +| |----------------------+-------------------------+------------------------|| +| |b_FirstCounterOption | APCI1710_HYSTERESIS_ON | In both edge analysis || +| | or | | circuits is available || +| |b_SecondCounterOption | | one hysteresis circuit.|| +| | | | It suppresses each || +| | | | time the first counting|| +| | | | pulse after a change || +| | | | of rotation. || +| |----------------------+-------------------------+------------------------|| +| |b_FirstCounterOption | APCI1710_HYSTERESIS_OFF | The first counting || +| | or | | pulse is not suppress || +| |b_SecondCounterOption | | after a change of || +| | | | rotation. || +| +----------------------+-------------------------+------------------------+| +| | +| | +| IMPORTANT! | +| This option are only avaible if you have selected the direct mode. | +| | +| | +| Counter operating option for direct mode | +| ---------------------------------------- | +| | +| +----------------------+--------------------+----------------------------+ | +| | Parameter | Passed value | Description | | +| |----------------------+--------------------+----------------------------| | +| |b_FirstCounterOption | APCI1710_INCREMENT | The counter increment for | | +| | or | | each counting pulse | | +| |b_SecondCounterOption | | | | +| |----------------------+--------------------+----------------------------| | +| |b_FirstCounterOption | APCI1710_DECREMENT | The counter decrement for | | +| | or | | each counting pulse | | +| |b_SecondCounterOption | | | | +| +----------------------+--------------------+----------------------------+ | +| | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710| +| BYTE_ b_ModulNbr : Module number to | +| configure (0 to 3) | +| BYTE_ b_CounterRange : Selection form counter | +| range. | +| BYTE_ b_FirstCounterModus : First counter operating | +| mode. | +| BYTE_ b_FirstCounterOption : First counter option. | +| BYTE_ b_SecondCounterModus : Second counter operating | +| mode. | +| BYTE_ b_SecondCounterOption : Second counter option. | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: The module is not a counter module | +| -3: The selected counter range is wrong. | +| -4: The selected first counter operating mode is wrong. | +| -5: The selected first counter operating option is wrong| +| -6: The selected second counter operating mode is wrong.| +| -7: The selected second counter operating option is | +| wrong. | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InitCounter(comedi_device * dev, + BYTE b_ModulNbr, + BYTE b_CounterRange, + BYTE b_FirstCounterModus, + BYTE b_FirstCounterOption, + BYTE b_SecondCounterModus, BYTE b_SecondCounterOption) +{ + INT i_ReturnValue = 0; + + /*******************************/ + /* Test if incremental counter */ + /*******************************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & 0xFFFF0000UL) == + APCI1710_INCREMENTAL_COUNTER) { + /**************************/ + /* Test the counter range */ + /**************************/ + + if (b_CounterRange == APCI1710_16BIT_COUNTER + || b_CounterRange == APCI1710_32BIT_COUNTER) { + /********************************/ + /* Test the first counter modus */ + /********************************/ + + if (b_FirstCounterModus == APCI1710_QUADRUPLE_MODE || + b_FirstCounterModus == APCI1710_DOUBLE_MODE || + b_FirstCounterModus == APCI1710_SIMPLE_MODE || + b_FirstCounterModus == APCI1710_DIRECT_MODE) { + /*********************************/ + /* Test the first counter option */ + /*********************************/ + + if ((b_FirstCounterModus == APCI1710_DIRECT_MODE + && (b_FirstCounterOption == + APCI1710_INCREMENT + || b_FirstCounterOption + == APCI1710_DECREMENT)) + || (b_FirstCounterModus != + APCI1710_DIRECT_MODE + && (b_FirstCounterOption == + APCI1710_HYSTERESIS_ON + || b_FirstCounterOption + == + APCI1710_HYSTERESIS_OFF))) + { + /**************************/ + /* Test if 16-bit counter */ + /**************************/ + + if (b_CounterRange == + APCI1710_16BIT_COUNTER) { + /*********************************/ + /* Test the second counter modus */ + /*********************************/ + + if ((b_FirstCounterModus != + APCI1710_DIRECT_MODE + && + (b_SecondCounterModus + == + APCI1710_QUADRUPLE_MODE + || + b_SecondCounterModus + == + APCI1710_DOUBLE_MODE + || + b_SecondCounterModus + == + APCI1710_SIMPLE_MODE)) + || (b_FirstCounterModus + == + APCI1710_DIRECT_MODE + && + b_SecondCounterModus + == + APCI1710_DIRECT_MODE)) + { + /**********************************/ + /* Test the second counter option */ + /**********************************/ + + if ((b_SecondCounterModus == APCI1710_DIRECT_MODE && (b_SecondCounterOption == APCI1710_INCREMENT || b_SecondCounterOption == APCI1710_DECREMENT)) || (b_SecondCounterModus != APCI1710_DIRECT_MODE && (b_SecondCounterOption == APCI1710_HYSTERESIS_ON || b_SecondCounterOption == APCI1710_HYSTERESIS_OFF))) { + i_ReturnValue = + 0; + } else { + /*********************************************************/ + /* The selected second counter operating option is wrong */ + /*********************************************************/ + + DPRINTK("The selected second counter operating option is wrong\n"); + i_ReturnValue = + -7; + } + } else { + /*******************************************************/ + /* The selected second counter operating mode is wrong */ + /*******************************************************/ + + DPRINTK("The selected second counter operating mode is wrong\n"); + i_ReturnValue = -6; + } + } + } else { + /********************************************************/ + /* The selected first counter operating option is wrong */ + /********************************************************/ + + DPRINTK("The selected first counter operating option is wrong\n"); + i_ReturnValue = -5; + } + } else { + /******************************************************/ + /* The selected first counter operating mode is wrong */ + /******************************************************/ + DPRINTK("The selected first counter operating mode is wrong\n"); + i_ReturnValue = -4; + } + } else { + /***************************************/ + /* The selected counter range is wrong */ + /***************************************/ + + DPRINTK("The selected counter range is wrong\n"); + i_ReturnValue = -3; + } + + /*************************/ + /* Test if a error occur */ + /*************************/ + + if (i_ReturnValue == 0) { + /**************************/ + /* Test if 16-Bit counter */ + /**************************/ + + if (b_CounterRange == APCI1710_32BIT_COUNTER) { + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister1 = b_CounterRange | + b_FirstCounterModus | + b_FirstCounterOption; + } else { + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister1 = b_CounterRange | + (b_FirstCounterModus & 0x5) | + (b_FirstCounterOption & 0x20) | + (b_SecondCounterModus & 0xA) | + (b_SecondCounterOption & 0x40); + + /***********************/ + /* Test if direct mode */ + /***********************/ + + if (b_FirstCounterModus == APCI1710_DIRECT_MODE) { + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister1 = devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister1 | + APCI1710_DIRECT_MODE; + } + } + + /***************************/ + /* Write the configuration */ + /***************************/ + + outl(devpriv->s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + dw_ModeRegister1_2_3_4, + devpriv->s_BoardInfos. + ui_Address + 20 + (64 * b_ModulNbr)); + + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_InitFlag.b_CounterInit = 1; + } + } else { + /**************************************/ + /* The module is not a counter module */ + /**************************************/ + + DPRINTK("The module is not a counter module\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_CounterAutoTest | +| (BYTE_ b_BoardHandle, | +| PBYTE_ pb_TestStatus) | ++----------------------------------------------------------------------------+ +| Task : A test mode is intended for testing the component and | +| the connected periphery. All the 8-bit counter chains | +| are operated internally as down counters. | +| Independently from the external signals, | +| all the four 8-bit counter chains are decremented in | +| parallel by each negative clock pulse edge of CLKX. | +| | +| Counter auto test conclusion | +| ---------------------------- | +| +-----------------+-----------------------------+ | +| | pb_TestStatus | Error description | | +| | mask | | | +| |-----------------+-----------------------------| | +| | 0000 | No error detected | | +| |-----------------|-----------------------------| | +| | 0001 | Error detected of counter 0 | | +| |-----------------|-----------------------------| | +| | 0010 | Error detected of counter 1 | | +| |-----------------|-----------------------------| | +| | 0100 | Error detected of counter 2 | | +| |-----------------|-----------------------------| | +| | 1000 | Error detected of counter 3 | | +| +-----------------+-----------------------------+ | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | | ++----------------------------------------------------------------------------+ +| Output Parameters : PBYTE_ pb_TestStatus : Auto test conclusion. See table| ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: No counter module found | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_CounterAutoTest(comedi_device * dev, PBYTE pb_TestStatus) +{ + BYTE b_ModulCpt = 0; + INT i_ReturnValue = 0; + DWORD dw_LathchValue; + + *pb_TestStatus = 0; + + /********************************/ + /* Test if counter module found */ + /********************************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[0] & 0xFFFF0000UL) == + APCI1710_INCREMENTAL_COUNTER + || (devpriv->s_BoardInfos. + dw_MolduleConfiguration[1] & 0xFFFF0000UL) == + APCI1710_INCREMENTAL_COUNTER + || (devpriv->s_BoardInfos. + dw_MolduleConfiguration[2] & 0xFFFF0000UL) == + APCI1710_INCREMENTAL_COUNTER + || (devpriv->s_BoardInfos. + dw_MolduleConfiguration[3] & 0xFFFF0000UL) == + APCI1710_INCREMENTAL_COUNTER) { + for (b_ModulCpt = 0; b_ModulCpt < 4; b_ModulCpt++) { + /*******************************/ + /* Test if incremental counter */ + /*******************************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulCpt] & + 0xFFFF0000UL) == + APCI1710_INCREMENTAL_COUNTER) { + /******************/ + /* Start the test */ + /******************/ + + outl(3, devpriv->s_BoardInfos. + ui_Address + 16 + (64 * b_ModulCpt)); + + /*********************/ + /* Tatch the counter */ + /*********************/ + + outl(1, devpriv->s_BoardInfos. + ui_Address + (64 * b_ModulCpt)); + + /************************/ + /* Read the latch value */ + /************************/ + + dw_LathchValue = inl(devpriv->s_BoardInfos. + ui_Address + 4 + (64 * b_ModulCpt)); + + if ((dw_LathchValue & 0xFF) != + ((dw_LathchValue >> 8) & 0xFF) + && (dw_LathchValue & 0xFF) != + ((dw_LathchValue >> 16) & 0xFF) + && (dw_LathchValue & 0xFF) != + ((dw_LathchValue >> 24) & 0xFF)) { + *pb_TestStatus = + *pb_TestStatus | (1 << + b_ModulCpt); + } + + /*****************/ + /* Stop the test */ + /*****************/ + + outl(0, devpriv->s_BoardInfos. + ui_Address + 16 + (64 * b_ModulCpt)); + } + } + } else { + /***************************/ + /* No counter module found */ + /***************************/ + + DPRINTK("No counter module found\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_InitIndex (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_ReferenceAction, | +| BYTE_ b_IndexOperation, | +| BYTE_ b_AutoMode, | +| BYTE_ b_InterruptEnable) | ++----------------------------------------------------------------------------+ +| Task : Initialise the index corresponding to the selected | +| module (b_ModulNbr). If a INDEX flag occur, you have | +| the possibility to clear the 32-Bit counter or to latch| +| the current 32-Bit value in to the first latch | +| register. The b_IndexOperation parameter give the | +| possibility to choice the INDEX action. | +| If you have enabled the automatic mode, each INDEX | +| action is cleared automatically, else you must read | +| the index status ("i_APCI1710_ReadIndexStatus") | +| after each INDEX action. | +| | +| | +| Index action | +| ------------ | +| | +| +------------------------+------------------------------------+ | +| | b_IndexOperation | Operation | | +| |------------------------+------------------------------------| | +| |APCI1710_LATCH_COUNTER | After a index signal, the counter | | +| | | value (32-Bit) is latched in to | | +| | | the first latch register | | +| |------------------------|------------------------------------| | +| |APCI1710_CLEAR_COUNTER | After a index signal, the counter | | +| | | value is cleared (32-Bit) | | +| +------------------------+------------------------------------+ | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure | +| (0 to 3) | +| BYTE_ b_ReferenceAction : Determine if the reference | +| must set or no for the | +| acceptance from index | +| APCI1710_ENABLE : | +| Reference must be set for | +| accepted the index | +| APCI1710_DISABLE : | +| Reference have not | +| importance | +| BYTE_ b_IndexOperation : Index operating mode. | +| See table. | +| BYTE_ b_AutoMode : Enable or disable the | +| automatic index reset. | +| APCI1710_ENABLE : | +| Enable the automatic mode | +| APCI1710_DISABLE : | +| Disable the automatic mode | +| BYTE_ b_InterruptEnable : Enable or disable the | +| interrupt. | +| APCI1710_ENABLE : | +| Enable the interrupt | +| APCI1710_DISABLE : | +| Disable the interrupt | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: No counter module found | +| -3: Counter not initialised see function | +| "i_APCI1710_InitCounter" | +| -4 The reference action parameter is wrong | +| -5: The index operating mode parameter is wrong | +| -6: The auto mode parameter is wrong | +| -7: Interrupt parameter is wrong | +| -8: Interrupt function not initialised. | +| See function "i_APCI1710_SetBoardIntRoutineX" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InitIndex(comedi_device * dev, + BYTE b_ModulNbr, + BYTE b_ReferenceAction, + BYTE b_IndexOperation, BYTE b_AutoMode, BYTE b_InterruptEnable) +{ + INT i_ReturnValue = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + /********************************/ + /* Test the reference parameter */ + /********************************/ + + if (b_ReferenceAction == APCI1710_ENABLE || + b_ReferenceAction == APCI1710_DISABLE) { + /****************************/ + /* Test the index parameter */ + /****************************/ + + if (b_IndexOperation == + APCI1710_HIGH_EDGE_LATCH_COUNTER + || b_IndexOperation == + APCI1710_LOW_EDGE_LATCH_COUNTER + || b_IndexOperation == + APCI1710_HIGH_EDGE_CLEAR_COUNTER + || b_IndexOperation == + APCI1710_LOW_EDGE_CLEAR_COUNTER + || b_IndexOperation == + APCI1710_HIGH_EDGE_LATCH_AND_CLEAR_COUNTER + || b_IndexOperation == + APCI1710_LOW_EDGE_LATCH_AND_CLEAR_COUNTER) + { + /********************************/ + /* Test the auto mode parameter */ + /********************************/ + + if (b_AutoMode == APCI1710_ENABLE || + b_AutoMode == APCI1710_DISABLE) + { + /***************************/ + /* Test the interrupt mode */ + /***************************/ + + if (b_InterruptEnable == + APCI1710_ENABLE + || b_InterruptEnable == + APCI1710_DISABLE) { + + /************************************/ + /* Makte the configuration commando */ + /************************************/ + + if (b_ReferenceAction == + APCI1710_ENABLE) + { + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister2 + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister2 + | + APCI1710_ENABLE_INDEX_ACTION; + } else { + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister2 + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister2 + & + APCI1710_DISABLE_INDEX_ACTION; + } + + /****************************************/ + /* Test if low level latch or/and clear */ + /****************************************/ + + if (b_IndexOperation == + APCI1710_LOW_EDGE_LATCH_COUNTER + || + b_IndexOperation + == + APCI1710_LOW_EDGE_CLEAR_COUNTER + || + b_IndexOperation + == + APCI1710_LOW_EDGE_LATCH_AND_CLEAR_COUNTER) + { + /*************************************/ + /* Set the index level to low (DQ26) */ + /*************************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister4 + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister4 + | + APCI1710_SET_LOW_INDEX_LEVEL; + } else { + /**************************************/ + /* Set the index level to high (DQ26) */ + /**************************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister4 + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister4 + & + APCI1710_SET_HIGH_INDEX_LEVEL; + } + + /***********************************/ + /* Test if latch and clear counter */ + /***********************************/ + + if (b_IndexOperation == + APCI1710_HIGH_EDGE_LATCH_AND_CLEAR_COUNTER + || + b_IndexOperation + == + APCI1710_LOW_EDGE_LATCH_AND_CLEAR_COUNTER) + { + /***************************************/ + /* Set the latch and clear flag (DQ27) */ + /***************************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister4 + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister4 + | + APCI1710_ENABLE_LATCH_AND_CLEAR; + } // if (b_IndexOperation == APCI1710_HIGH_EDGE_LATCH_AND_CLEAR_COUNTER || b_IndexOperation == APCI1710_LOW_EDGE_LATCH_AND_CLEAR_COUNTER) + else { + /*****************************************/ + /* Clear the latch and clear flag (DQ27) */ + /*****************************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister4 + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister4 + & + APCI1710_DISABLE_LATCH_AND_CLEAR; + + /*************************/ + /* Test if latch counter */ + /*************************/ + + if (b_IndexOperation == APCI1710_HIGH_EDGE_LATCH_COUNTER || b_IndexOperation == APCI1710_LOW_EDGE_LATCH_COUNTER) { + /*********************************/ + /* Enable the latch from counter */ + /*********************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister2 + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister2 + | + APCI1710_INDEX_LATCH_COUNTER; + } else { + /*********************************/ + /* Enable the clear from counter */ + /*********************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister2 + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister2 + & + (~APCI1710_INDEX_LATCH_COUNTER); + } + } // // if (b_IndexOperation == APCI1710_HIGH_EDGE_LATCH_AND_CLEAR_COUNTER || b_IndexOperation == APCI1710_LOW_EDGE_LATCH_AND_CLEAR_COUNTER) + + if (b_AutoMode == + APCI1710_DISABLE) + { + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister2 + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister2 + | + APCI1710_INDEX_AUTO_MODE; + } else { + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister2 + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister2 + & + (~APCI1710_INDEX_AUTO_MODE); + } + + if (b_InterruptEnable == + APCI1710_ENABLE) + { + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister3 + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister3 + | + APCI1710_ENABLE_INDEX_INT; + } else { + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister3 + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister3 + & + APCI1710_DISABLE_INDEX_INT; + } + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_InitFlag. + b_IndexInit = 1; + + } else { + /********************************/ + /* Interrupt parameter is wrong */ + /********************************/ + DPRINTK("Interrupt parameter is wrong\n"); + i_ReturnValue = -7; + } + } else { + /************************************/ + /* The auto mode parameter is wrong */ + /************************************/ + + DPRINTK("The auto mode parameter is wrong\n"); + i_ReturnValue = -6; + } + } else { + /***********************************************/ + /* The index operating mode parameter is wrong */ + /***********************************************/ + + DPRINTK("The index operating mode parameter is wrong\n"); + i_ReturnValue = -5; + } + } else { + /*******************************************/ + /* The reference action parameter is wrong */ + /*******************************************/ + + DPRINTK("The reference action parameter is wrong\n"); + i_ReturnValue = -4; + } + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_InitReference | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_ReferenceLevel) | ++----------------------------------------------------------------------------+ +| Task : Initialise the reference corresponding to the selected | +| module (b_ModulNbr). | +| | +| Reference level | +| --------------- | +| +--------------------+-------------------------+ | +| | b_ReferenceLevel | Operation | | +| +--------------------+-------------------------+ | +| | APCI1710_LOW | Reference occur if "0" | | +| |--------------------|-------------------------| | +| | APCI1710_HIGH | Reference occur if "1" | | +| +--------------------+-------------------------+ | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure | +| (0 to 3) | +| BYTE_ b_ReferenceLevel : Reference level. | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: The selected module number parameter is wrong | +| -3: Counter not initialised see function | +| "i_APCI1710_InitCounter" | +| -4: Reference level parameter is wrong | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InitReference(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_ReferenceLevel) +{ + INT i_ReturnValue = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + /**************************************/ + /* Test the reference level parameter */ + /**************************************/ + + if (b_ReferenceLevel == 0 || b_ReferenceLevel == 1) { + if (b_ReferenceLevel == 1) { + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister2 = devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister2 | + APCI1710_REFERENCE_HIGH; + } else { + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister2 = devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister2 & + APCI1710_REFERENCE_LOW; + } + + outl(devpriv->s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + dw_ModeRegister1_2_3_4, + devpriv->s_BoardInfos.ui_Address + 20 + + (64 * b_ModulNbr)); + + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_InitFlag.b_ReferenceInit = 1; + } else { + /**************************************/ + /* Reference level parameter is wrong */ + /**************************************/ + + DPRINTK("Reference level parameter is wrong\n"); + i_ReturnValue = -4; + } + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_InitExternalStrobe | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_ExternalStrobe, | +| BYTE_ b_ExternalStrobeLevel) | ++----------------------------------------------------------------------------+ +| Task : Initialises the external strobe level corresponding to | +| the selected module (b_ModulNbr). | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure | +| (0 to 3) | +| BYTE_ b_ExternalStrobe : External strobe selection | +| 0 : External strobe A | +| 1 : External strobe B | +| BYTE_ b_ExternalStrobeLevel : External strobe level | +| APCI1710_LOW : | +| External latch occurs if "0" | +| APCI1710_HIGH : | +| External latch occurs if "1" | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: The selected module number is wrong | +| -3: Counter not initialised. | +| See function "i_APCI1710_InitCounter" | +| -4: External strobe selection is wrong | +| -5: External strobe level parameter is wrong | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InitExternalStrobe(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_ExternalStrobe, BYTE b_ExternalStrobeLevel) +{ + INT i_ReturnValue = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + /**************************************/ + /* Test the external strobe selection */ + /**************************************/ + + if (b_ExternalStrobe == 0 || b_ExternalStrobe == 1) { + /******************/ + /* Test the level */ + /******************/ + + if ((b_ExternalStrobeLevel == APCI1710_HIGH) || + ((b_ExternalStrobeLevel == APCI1710_LOW + && (devpriv-> + s_BoardInfos. + dw_MolduleConfiguration + [b_ModulNbr] & + 0xFFFF) >= + 0x3135))) { + /*****************/ + /* Set the level */ + /*****************/ + + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister4 = (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister4 & (0xFF - + (0x10 << b_ExternalStrobe))) | ((b_ExternalStrobeLevel ^ 1) << (4 + b_ExternalStrobe)); + } else { + /********************************************/ + /* External strobe level parameter is wrong */ + /********************************************/ + + DPRINTK("External strobe level parameter is wrong\n"); + i_ReturnValue = -5; + } + } // if (b_ExternalStrobe == 0 || b_ExternalStrobe == 1) + else { + /**************************************/ + /* External strobe selection is wrong */ + /**************************************/ + + DPRINTK("External strobe selection is wrong\n"); + i_ReturnValue = -4; + } // if (b_ExternalStrobe == 0 || b_ExternalStrobe == 1) + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + + /* + +----------------------------------------------------------------------------+ + | Function Name : _INT_ i_APCI1710_InitCompareLogic | + | (BYTE_ b_BoardHandle, | + | BYTE_ b_ModulNbr, | + | UINT_ ui_CompareValue) | + +----------------------------------------------------------------------------+ + | Task : Set the 32-Bit compare value. At that moment that the | + | incremental counter arrive to the compare value | + | (ui_CompareValue) a interrupt is generated. | + +----------------------------------------------------------------------------+ + | Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | + | BYTE_ b_ModulNbr : Module number to configure | + | (0 to 3) | + | UINT_ ui_CompareValue : 32-Bit compare value | + +----------------------------------------------------------------------------+ + | Output Parameters : - + +----------------------------------------------------------------------------+ + | Return Value : 0: No error | + | -1: The handle parameter of the board is wrong | + | -2: No counter module found | + | -3: Counter not initialised see function | + | "i_APCI1710_InitCounter" | + +----------------------------------------------------------------------------+ + */ + +INT i_APCI1710_InitCompareLogic(comedi_device * dev, + BYTE b_ModulNbr, UINT ui_CompareValue) +{ + INT i_ReturnValue = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + + outl(ui_CompareValue, devpriv->s_BoardInfos. + ui_Address + 28 + (64 * b_ModulNbr)); + + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_InitFlag.b_CompareLogicInit = 1; + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_InitFrequencyMeasurement | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_PCIInputClock, | +| BYTE_ b_TimingUnity, | +| ULONG_ ul_TimingInterval, | +| PULONG_ pul_RealTimingInterval) | ++----------------------------------------------------------------------------+ +| Task : Sets the time for the frequency measurement. | +| Configures the selected TOR incremental counter of the | +| selected module (b_ModulNbr). The ul_TimingInterval and| +| ul_TimingUnity determine the time base for the | +| measurement. The pul_RealTimingInterval returns the | +| real time value. You must call up this function before | +| you call up any other function which gives access to | +| the frequency measurement. | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Number of the module to be | +| configured (0 to 3) | +| BYTE_ b_PCIInputClock : Selection of the PCI bus | +| clock | +| - APCI1710_30MHZ : | +| The PC has a PCI bus clock | +| of 30 MHz | +| - APCI1710_33MHZ : | +| The PC has a PCI bus clock | +| of 33 MHz | +| BYTE_ b_TimingUnity : Base time unit (0 to 2) | +| 0 : ns | +| 1 : æs | +| 2 : ms | +| ULONG_ ul_TimingInterval: Base time value. | ++----------------------------------------------------------------------------+ +| Output Parameters : PULONG_ pul_RealTimingInterval : Real base time value. | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: The selected module number is wrong | +| -3: Counter not initialised see function | +| "i_APCI1710_InitCounter" | +| -4: The selected PCI input clock is wrong | +| -5: Timing unity selection is wrong | +| -6: Base timing selection is wrong | +| -7: 40MHz quartz not on board | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InitFrequencyMeasurement(comedi_device * dev, + BYTE b_ModulNbr, + BYTE b_PCIInputClock, + BYTE b_TimingUnity, + ULONG ul_TimingInterval, PULONG pul_RealTimingInterval) +{ + INT i_ReturnValue = 0; + ULONG ul_TimerValue = 0; + double d_RealTimingInterval; + DWORD dw_Status = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + /**************************/ + /* Test the PCI bus clock */ + /**************************/ + + if ((b_PCIInputClock == APCI1710_30MHZ) || + (b_PCIInputClock == APCI1710_33MHZ) || + (b_PCIInputClock == APCI1710_40MHZ)) { + /************************/ + /* Test the timing unit */ + /************************/ + + if (b_TimingUnity <= 2) { + /**********************************/ + /* Test the base timing selection */ + /**********************************/ + + if (((b_PCIInputClock == APCI1710_30MHZ) + && (b_TimingUnity == 0) + && (ul_TimingInterval >= + 266) + && (ul_TimingInterval <= + 8738133UL)) + || ((b_PCIInputClock == + APCI1710_30MHZ) + && (b_TimingUnity == 1) + && (ul_TimingInterval >= + 1) + && (ul_TimingInterval <= + 8738UL)) + || ((b_PCIInputClock == + APCI1710_30MHZ) + && (b_TimingUnity == 2) + && (ul_TimingInterval >= + 1) + && (ul_TimingInterval <= + 8UL)) + || ((b_PCIInputClock == + APCI1710_33MHZ) + && (b_TimingUnity == 0) + && (ul_TimingInterval >= + 242) + && (ul_TimingInterval <= + 7943757UL)) + || ((b_PCIInputClock == + APCI1710_33MHZ) + && (b_TimingUnity == 1) + && (ul_TimingInterval >= + 1) + && (ul_TimingInterval <= + 7943UL)) + || ((b_PCIInputClock == + APCI1710_33MHZ) + && (b_TimingUnity == 2) + && (ul_TimingInterval >= + 1) + && (ul_TimingInterval <= + 7UL)) + || ((b_PCIInputClock == + APCI1710_40MHZ) + && (b_TimingUnity == 0) + && (ul_TimingInterval >= + 200) + && (ul_TimingInterval <= + 6553500UL)) + || ((b_PCIInputClock == + APCI1710_40MHZ) + && (b_TimingUnity == 1) + && (ul_TimingInterval >= + 1) + && (ul_TimingInterval <= + 6553UL)) + || ((b_PCIInputClock == + APCI1710_40MHZ) + && (b_TimingUnity == 2) + && (ul_TimingInterval >= + 1) + && (ul_TimingInterval <= + 6UL))) { + /**********************/ + /* Test if 40MHz used */ + /**********************/ + + if (b_PCIInputClock == + APCI1710_40MHZ) { + /******************************/ + /* Test if firmware >= Rev1.5 */ + /******************************/ + + if ((devpriv->s_BoardInfos.dw_MolduleConfiguration[b_ModulNbr] & 0xFFFF) >= 0x3135) { + /*********************************/ + /* Test if 40MHz quartz on board */ + /*********************************/ + + /*INPDW (ps_APCI1710Variable-> + s_Board [b_BoardHandle]. + s_BoardInfos. + ui_Address + 36 + (64 * b_ModulNbr), &dw_Status); */ + dw_Status = + inl + (devpriv-> + s_BoardInfos. + ui_Address + + 36 + + (64 * b_ModulNbr)); + + /******************************/ + /* Test the quartz flag (DQ0) */ + /******************************/ + + if ((dw_Status & 1) != 1) { + /*****************************/ + /* 40MHz quartz not on board */ + /*****************************/ + + DPRINTK("40MHz quartz not on board\n"); + i_ReturnValue + = + -7; + } + } else { + /*****************************/ + /* 40MHz quartz not on board */ + /*****************************/ + DPRINTK("40MHz quartz not on board\n"); + i_ReturnValue = + -7; + } + } // if (b_PCIInputClock == APCI1710_40MHZ) + + /***************************/ + /* Test if not error occur */ + /***************************/ + + if (i_ReturnValue == 0) { + /****************************/ + /* Test the INC_CPT version */ + /****************************/ + + if ((devpriv->s_BoardInfos.dw_MolduleConfiguration[b_ModulNbr] & 0xFFFF) >= 0x3131) { + + /**********************/ + /* Test if 40MHz used */ + /**********************/ + + if (b_PCIInputClock == APCI1710_40MHZ) { + /*********************************/ + /* Enable the 40MHz quarz (DQ30) */ + /*********************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister4 + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister4 + | + APCI1710_ENABLE_40MHZ_FREQUENCY; + } // if (b_PCIInputClock == APCI1710_40MHZ) + else { + /**********************************/ + /* Disable the 40MHz quarz (DQ30) */ + /**********************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister4 + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister4 + & + APCI1710_DISABLE_40MHZ_FREQUENCY; + + } // if (b_PCIInputClock == APCI1710_40MHZ) + + /********************************/ + /* Calculate the division fator */ + /********************************/ + + fpu_begin(); + switch (b_TimingUnity) { + /******/ + /* ns */ + /******/ + + case 0: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_TimerValue + = + (ULONG) + (ul_TimingInterval + * + (0.00025 * b_PCIInputClock)); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_TimingInterval * (0.00025 * (double)b_PCIInputClock)) >= ((double)((double)ul_TimerValue + 0.5))) { + ul_TimerValue + = + ul_TimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + *pul_RealTimingInterval + = + (ULONG) + (ul_TimerValue + / + (0.00025 * (double)b_PCIInputClock)); + d_RealTimingInterval + = + (double) + ul_TimerValue + / + (0.00025 + * + (double) + b_PCIInputClock); + + if ((double)((double)ul_TimerValue / (0.00025 * (double)b_PCIInputClock)) >= (double)((double)*pul_RealTimingInterval + 0.5)) { + *pul_RealTimingInterval + = + *pul_RealTimingInterval + + + 1; + } + + ul_TimingInterval + = + ul_TimingInterval + - + 1; + ul_TimerValue + = + ul_TimerValue + - + 2; + + break; + + /******/ + /* æs */ + /******/ + + case 1: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_TimerValue + = + (ULONG) + (ul_TimingInterval + * + (0.25 * b_PCIInputClock)); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_TimingInterval * (0.25 * (double)b_PCIInputClock)) >= ((double)((double)ul_TimerValue + 0.5))) { + ul_TimerValue + = + ul_TimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + *pul_RealTimingInterval + = + (ULONG) + (ul_TimerValue + / + (0.25 * (double)b_PCIInputClock)); + d_RealTimingInterval + = + (double) + ul_TimerValue + / + ( + (double) + 0.25 + * + (double) + b_PCIInputClock); + + if ((double)((double)ul_TimerValue / (0.25 * (double)b_PCIInputClock)) >= (double)((double)*pul_RealTimingInterval + 0.5)) { + *pul_RealTimingInterval + = + *pul_RealTimingInterval + + + 1; + } + + ul_TimingInterval + = + ul_TimingInterval + - + 1; + ul_TimerValue + = + ul_TimerValue + - + 2; + + break; + + /******/ + /* ms */ + /******/ + + case 2: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_TimerValue + = + ul_TimingInterval + * + (250.0 + * + b_PCIInputClock); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_TimingInterval * (250.0 * (double)b_PCIInputClock)) >= ((double)((double)ul_TimerValue + 0.5))) { + ul_TimerValue + = + ul_TimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + *pul_RealTimingInterval + = + (ULONG) + (ul_TimerValue + / + (250.0 * (double)b_PCIInputClock)); + d_RealTimingInterval + = + (double) + ul_TimerValue + / + (250.0 + * + (double) + b_PCIInputClock); + + if ((double)((double)ul_TimerValue / (250.0 * (double)b_PCIInputClock)) >= (double)((double)*pul_RealTimingInterval + 0.5)) { + *pul_RealTimingInterval + = + *pul_RealTimingInterval + + + 1; + } + + ul_TimingInterval + = + ul_TimingInterval + - + 1; + ul_TimerValue + = + ul_TimerValue + - + 2; + + break; + } + + fpu_end(); + /*************************/ + /* Write the timer value */ + /*************************/ + + outl(ul_TimerValue, devpriv->s_BoardInfos.ui_Address + 32 + (64 * b_ModulNbr)); + + /*******************************/ + /* Set the initialisation flag */ + /*******************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_InitFlag. + b_FrequencyMeasurementInit + = 1; + } else { + /***************************/ + /* Counter not initialised */ + /***************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = + -3; + } + } // if (i_ReturnValue == 0) + } else { + /**********************************/ + /* Base timing selection is wrong */ + /**********************************/ + + DPRINTK("Base timing selection is wrong\n"); + i_ReturnValue = -6; + } + } else { + /***********************************/ + /* Timing unity selection is wrong */ + /***********************************/ + + DPRINTK("Timing unity selection is wrong\n"); + i_ReturnValue = -5; + } + } else { + /*****************************************/ + /* The selected PCI input clock is wrong */ + /*****************************************/ + + DPRINTK("The selected PCI input clock is wrong\n"); + i_ReturnValue = -4; + } + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/*########################################################################### */ + + //INSN BITS +/*########################################################################### */ + +/* ++----------------------------------------------------------------------------+ +| Function Name :INT i_APCI1710_InsnBitsINCCPT(comedi_device *dev,comedi_subdevice *s, +comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Set & Clear Functions for INC_CPT | ++----------------------------------------------------------------------------+ +| Input Parameters : ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnBitsINCCPT(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_BitsType; + INT i_ReturnValue = 0; + ui_BitsType = CR_CHAN(insn->chanspec); + devpriv->tsk_Current = current; // Save the current process task structure + + switch (ui_BitsType) { + case APCI1710_INCCPT_CLEARCOUNTERVALUE: + i_ReturnValue = i_APCI1710_ClearCounterValue(dev, + (BYTE) CR_AREF(insn->chanspec)); + break; + + case APCI1710_INCCPT_CLEARALLCOUNTERVALUE: + i_ReturnValue = i_APCI1710_ClearAllCounterValue(dev); + break; + + case APCI1710_INCCPT_SETINPUTFILTER: + i_ReturnValue = i_APCI1710_SetInputFilter(dev, + (BYTE) CR_AREF(insn->chanspec), + (BYTE) data[0], (BYTE) data[1]); + break; + + case APCI1710_INCCPT_LATCHCOUNTER: + i_ReturnValue = i_APCI1710_LatchCounter(dev, + (BYTE) CR_AREF(insn->chanspec), (BYTE) data[0]); + break; + + case APCI1710_INCCPT_SETINDEXANDREFERENCESOURCE: + i_ReturnValue = i_APCI1710_SetIndexAndReferenceSource(dev, + (BYTE) CR_AREF(insn->chanspec), (BYTE) data[0]); + break; + + case APCI1710_INCCPT_SETDIGITALCHLON: + i_ReturnValue = i_APCI1710_SetDigitalChlOn(dev, + (BYTE) CR_AREF(insn->chanspec)); + break; + + case APCI1710_INCCPT_SETDIGITALCHLOFF: + i_ReturnValue = i_APCI1710_SetDigitalChlOff(dev, + (BYTE) CR_AREF(insn->chanspec)); + break; + + default: + printk("Bits Config Parameter Wrong\n"); + } + + if (i_ReturnValue >= 0) + i_ReturnValue = insn->n; + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_ClearCounterValue | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr) | ++----------------------------------------------------------------------------+ +| Task : Clear the counter value from selected module | +| (b_ModulNbr). | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure | +| (0 to 3) | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: The selected module number parameter is wrong | +| -3: Counter not initialised see function | +| "i_APCI1710_InitCounter" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_ClearCounterValue(comedi_device * dev, BYTE b_ModulNbr) +{ + INT i_ReturnValue = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + /*********************/ + /* Clear the counter */ + /*********************/ + + outl(1, devpriv->s_BoardInfos. + ui_Address + 16 + (64 * b_ModulNbr)); + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_ClearAllCounterValue | +| (BYTE_ b_BoardHandle) | ++----------------------------------------------------------------------------+ +| Task : Clear all counter value. | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: No counter module found | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_ClearAllCounterValue(comedi_device * dev) +{ + BYTE b_ModulCpt = 0; + INT i_ReturnValue = 0; + + /********************************/ + /* Test if counter module found */ + /********************************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[0] & 0xFFFF0000UL) == + APCI1710_INCREMENTAL_COUNTER + || (devpriv->s_BoardInfos. + dw_MolduleConfiguration[1] & 0xFFFF0000UL) == + APCI1710_INCREMENTAL_COUNTER + || (devpriv->s_BoardInfos. + dw_MolduleConfiguration[2] & 0xFFFF0000UL) == + APCI1710_INCREMENTAL_COUNTER + || (devpriv->s_BoardInfos. + dw_MolduleConfiguration[3] & 0xFFFF0000UL) == + APCI1710_INCREMENTAL_COUNTER) { + for (b_ModulCpt = 0; b_ModulCpt < 4; b_ModulCpt++) { + /*******************************/ + /* Test if incremental counter */ + /*******************************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulCpt] & + 0xFFFF0000UL) == + APCI1710_INCREMENTAL_COUNTER) { + /*********************/ + /* Clear the counter */ + /*********************/ + + outl(1, devpriv->s_BoardInfos. + ui_Address + 16 + (64 * b_ModulCpt)); + } + } + } else { + /***************************/ + /* No counter module found */ + /***************************/ + + DPRINTK("No counter module found\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_SetInputFilter | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_Module, | +| BYTE_ b_PCIInputClock, | +| BYTE_ b_Filter) | ++----------------------------------------------------------------------------+ +| Task : Disable or enable the software filter from selected | +| module (b_ModulNbr). b_Filter determine the filter time| ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Number of the module to be | +| configured (0 to 3) | +| BYTE_ b_PCIInputClock : Selection of the PCI bus | +| clock | +| - APCI1710_30MHZ : | +| The PC has a PCI bus clock | +| of 30 MHz | +| - APCI1710_33MHZ : | +| The PC has a PCI bus clock | +| of 33 MHz | +| - APCI1710_40MHZ : | +| The APCI1710 has a 40MHz | +| quartz | +| BYTE_ b_Filter : Filter selection | +| | +| 30 MHz | +| ------ | +| 0: Software filter not used | +| 1: Filter from 266ns (3.750000MHz) | +| 2: Filter from 400ns (2.500000MHz) | +| 3: Filter from 533ns (1.876170MHz) | +| 4: Filter from 666ns (1.501501MHz) | +| 5: Filter from 800ns (1.250000MHz) | +| 6: Filter from 933ns (1.071800MHz) | +| 7: Filter from 1066ns (0.938080MHz) | +| 8: Filter from 1200ns (0.833333MHz) | +| 9: Filter from 1333ns (0.750000MHz) | +| 10: Filter from 1466ns (0.682100MHz) | +| 11: Filter from 1600ns (0.625000MHz) | +| 12: Filter from 1733ns (0.577777MHz) | +| 13: Filter from 1866ns (0.535900MHz) | +| 14: Filter from 2000ns (0.500000MHz) | +| 15: Filter from 2133ns (0.468800MHz) | +| | +| 33 MHz | +| ------ | +| 0: Software filter not used | +| 1: Filter from 242ns (4.125000MHz) | +| 2: Filter from 363ns (2.754820MHz) | +| 3: Filter from 484ns (2.066115MHz) | +| 4: Filter from 605ns (1.652892MHz) | +| 5: Filter from 726ns (1.357741MHz) | +| 6: Filter from 847ns (1.180637MHz) | +| 7: Filter from 968ns (1.033055MHz) | +| 8: Filter from 1089ns (0.918273MHz) | +| 9: Filter from 1210ns (0.826446MHz) | +| 10: Filter from 1331ns (0.751314MHz) | +| 11: Filter from 1452ns (0.688705MHz) | +| 12: Filter from 1573ns (0.635727MHz) | +| 13: Filter from 1694ns (0.590318MHz) | +| 14: Filter from 1815ns (0.550964MHz) | +| 15: Filter from 1936ns (0.516528MHz) | +| | +| 40 MHz | +| ------ | +| 0: Software filter not used | +| 1: Filter from 200ns (5.000000MHz) | +| 2: Filter from 300ns (3.333333MHz) | +| 3: Filter from 400ns (2.500000MHz) | +| 4: Filter from 500ns (2.000000MHz) | +| 5: Filter from 600ns (1.666666MHz) | +| 6: Filter from 700ns (1.428500MHz) | +| 7: Filter from 800ns (1.250000MHz) | +| 8: Filter from 900ns (1.111111MHz) | +| 9: Filter from 1000ns (1.000000MHz) | +| 10: Filter from 1100ns (0.909090MHz) | +| 11: Filter from 1200ns (0.833333MHz) | +| 12: Filter from 1300ns (0.769200MHz) | +| 13: Filter from 1400ns (0.714200MHz) | +| 14: Filter from 1500ns (0.666666MHz) | +| 15: Filter from 1600ns (0.625000MHz) | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: The selected module number is wrong | +| -3: The module is not a counter module | +| -4: The selected PCI input clock is wrong | +| -5: The selected filter value is wrong | +| -6: 40MHz quartz not on board | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_SetInputFilter(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_PCIInputClock, BYTE b_Filter) +{ + INT i_ReturnValue = 0; + DWORD dw_Status = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if incremental counter */ + /*******************************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_INCREMENTAL_COUNTER) { + /******************************/ + /* Test if firmware >= Rev1.5 */ + /******************************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF) >= 0x3135) { + /**************************/ + /* Test the PCI bus clock */ + /**************************/ + + if ((b_PCIInputClock == APCI1710_30MHZ) || + (b_PCIInputClock == APCI1710_33MHZ) || + (b_PCIInputClock == APCI1710_40MHZ)) { + /*************************/ + /* Test the filter value */ + /*************************/ + + if (b_Filter < 16) { + /**********************/ + /* Test if 40MHz used */ + /**********************/ + + if (b_PCIInputClock == + APCI1710_40MHZ) { + /*********************************/ + /* Test if 40MHz quartz on board */ + /*********************************/ + + dw_Status = + inl(devpriv-> + s_BoardInfos. + ui_Address + + 36 + + (64 * b_ModulNbr)); + + /******************************/ + /* Test the quartz flag (DQ0) */ + /******************************/ + + if ((dw_Status & 1) != + 1) { + /*****************************/ + /* 40MHz quartz not on board */ + /*****************************/ + + DPRINTK("40MHz quartz not on board\n"); + i_ReturnValue = + -6; + } + } // if (b_PCIInputClock == APCI1710_40MHZ) + + /***************************/ + /* Test if error not occur */ + /***************************/ + + if (i_ReturnValue == 0) { + /**********************/ + /* Test if 40MHz used */ + /**********************/ + + if (b_PCIInputClock == + APCI1710_40MHZ) + { + /*********************************/ + /* Enable the 40MHz quarz (DQ31) */ + /*********************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister4 + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister4 + | + APCI1710_ENABLE_40MHZ_FILTER; + + } // if (b_PCIInputClock == APCI1710_40MHZ) + else { + /**********************************/ + /* Disable the 40MHz quarz (DQ31) */ + /**********************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister4 + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister4 + & + APCI1710_DISABLE_40MHZ_FILTER; + + } // if (b_PCIInputClock == APCI1710_40MHZ) + + /************************/ + /* Set the filter value */ + /************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister3 + = + (devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister3 + & 0x1F) | + ((b_Filter & + 0x7) << + 5); + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister4 + = + (devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister4 + & 0xFE) | + ((b_Filter & + 0x8) >> + 3); + + /***************************/ + /* Write the configuration */ + /***************************/ + + outl(devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + dw_ModeRegister1_2_3_4, + devpriv-> + s_BoardInfos. + ui_Address + + 20 + + (64 * b_ModulNbr)); + } // if (i_ReturnValue == 0) + } // if (b_Filter < 16) + else { + /**************************************/ + /* The selected filter value is wrong */ + /**************************************/ + + DPRINTK("The selected filter value is wrong\n"); + i_ReturnValue = -5; + } // if (b_Filter < 16) + } // if ((b_PCIInputClock == APCI1710_30MHZ) || (b_PCIInputClock == APCI1710_33MHZ) || (b_PCIInputClock == APCI1710_40MHZ)) + else { + /*****************************************/ + /* The selected PCI input clock is wrong */ + /*****************************************/ + + DPRINTK("The selected PCI input clock is wrong\n"); + i_ReturnValue = 4; + } // if ((b_PCIInputClock == APCI1710_30MHZ) || (b_PCIInputClock == APCI1710_33MHZ) || (b_PCIInputClock == APCI1710_40MHZ)) + } else { + /**************************************/ + /* The module is not a counter module */ + /**************************************/ + + DPRINTK("The module is not a counter module\n"); + i_ReturnValue = -3; + } + } else { + /**************************************/ + /* The module is not a counter module */ + /**************************************/ + + DPRINTK("The module is not a counter module\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_LatchCounter (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_LatchReg) | ++----------------------------------------------------------------------------+ +| Task : Latch the courant value from selected module | +| (b_ModulNbr) in to the selected latch register | +| (b_LatchReg). | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure | +| (0 to 3) | +| BYTE_ b_LatchReg : Selected latch register | +| 0 : for the first latch register | +| 1 : for the second latch register | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: No counter module found | +| -3: Counter not initialised see function | +| "i_APCI1710_InitCounter" | +| -4: The selected latch register parameter is wrong | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_LatchCounter(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_LatchReg) +{ + INT i_ReturnValue = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + /*************************************/ + /* Test the latch register parameter */ + /*************************************/ + + if (b_LatchReg < 2) { + /*********************/ + /* Tatch the counter */ + /*********************/ + + outl(1 << (b_LatchReg * 4), + devpriv->s_BoardInfos.ui_Address + + (64 * b_ModulNbr)); + } else { + /**************************************************/ + /* The selected latch register parameter is wrong */ + /**************************************************/ + + DPRINTK("The selected latch register parameter is wrong\n"); + i_ReturnValue = -4; + } + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_SetIndexAndReferenceSource | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_SourceSelection) | ++----------------------------------------------------------------------------+ +| Task : Determine the hardware source for the index and the | +| reference logic. Per default the index logic is | +| connected to the difference input C and the reference | +| logic is connected to the 24V input E | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure | +| (0 to 3) | +| BYTE_ b_SourceSelection : APCI1710_SOURCE_0 : | +| The index logic is connected | +| to the difference input C and| +| the reference logic is | +| connected to the 24V input E.| +| This is the default | +| configuration. | +| APCI1710_SOURCE_1 : | +| The reference logic is | +| connected to the difference | +| input C and the index logic | +| is connected to the 24V | +| input E | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: The selected module number is wrong | +| -3: The module is not a counter module. | +| -4: The source selection is wrong | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_SetIndexAndReferenceSource(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_SourceSelection) +{ + INT i_ReturnValue = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if incremental counter */ + /*******************************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_INCREMENTAL_COUNTER) { + /******************************/ + /* Test if firmware >= Rev1.5 */ + /******************************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF) >= 0x3135) { + /*****************************/ + /* Test the source selection */ + /*****************************/ + + if (b_SourceSelection == APCI1710_SOURCE_0 || + b_SourceSelection == APCI1710_SOURCE_1) + { + /******************************************/ + /* Test if invert the index and reference */ + /******************************************/ + + if (b_SourceSelection == + APCI1710_SOURCE_1) { + /********************************************/ + /* Invert index and reference source (DQ25) */ + /********************************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister4 = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister4 | + APCI1710_INVERT_INDEX_RFERENCE; + } else { + /****************************************/ + /* Set the default configuration (DQ25) */ + /****************************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister4 = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister4 & + APCI1710_DEFAULT_INDEX_RFERENCE; + } + } // if (b_SourceSelection == APCI1710_SOURCE_0 ||b_SourceSelection == APCI1710_SOURCE_1) + else { + /*********************************/ + /* The source selection is wrong */ + /*********************************/ + + DPRINTK("The source selection is wrong\n"); + i_ReturnValue = -4; + } // if (b_SourceSelection == APCI1710_SOURCE_0 ||b_SourceSelection == APCI1710_SOURCE_1) + } else { + /**************************************/ + /* The module is not a counter module */ + /**************************************/ + + DPRINTK("The module is not a counter module\n"); + i_ReturnValue = -3; + } + } else { + /**************************************/ + /* The module is not a counter module */ + /**************************************/ + + DPRINTK("The module is not a counter module\n"); + i_ReturnValue = -3; + } + } else { + /***************************************/ + /* The selected module number is wrong */ + /***************************************/ + + DPRINTK("The selected module number is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_SetDigitalChlOn | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr) | ++----------------------------------------------------------------------------+ +| Task : Sets the digital output H Setting an output means | +| setting an ouput high. | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Number of the module to be | +| configured (0 to 3) | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: The selected module number is wrong | +| -3: Counter not initialised see function | +| "i_APCI1710_InitCounter" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_SetDigitalChlOn(comedi_device * dev, BYTE b_ModulNbr) +{ + INT i_ReturnValue = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister3 = devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister.b_ModeRegister3 | 0x10; + + /*********************/ + /* Set the output On */ + /*********************/ + + outl(devpriv->s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + dw_ModeRegister1_2_3_4, devpriv->s_BoardInfos. + ui_Address + 20 + (64 * b_ModulNbr)); + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_SetDigitalChlOff | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr) | ++----------------------------------------------------------------------------+ +| Task : Resets the digital output H. Resetting an output means | +| setting an ouput low. | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Number of the module to be | +| configured (0 to 3) | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: The selected module number is wrong | +| -3: Counter not initialised see function | +| "i_APCI1710_InitCounter" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_SetDigitalChlOff(comedi_device * dev, BYTE b_ModulNbr) +{ + INT i_ReturnValue = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister3 = devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister.b_ModeRegister3 & 0xEF; + + /**********************/ + /* Set the output Off */ + /**********************/ + + outl(devpriv->s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + dw_ModeRegister1_2_3_4, devpriv->s_BoardInfos. + ui_Address + 20 + (64 * b_ModulNbr)); + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/*########################################################################### */ + + // INSN WRITE +/*########################################################################### */ + +/* ++----------------------------------------------------------------------------+ +| Function Name :INT i_APCI1710_InsnWriteINCCPT(comedi_device *dev,comedi_subdevice *s, +comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Enable Disable functions for INC_CPT | ++----------------------------------------------------------------------------+ +| Input Parameters : ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : ++----------------------------------------------------------------------------+ +*/ +INT i_APCI1710_InsnWriteINCCPT(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_WriteType; + INT i_ReturnValue = 0; + + ui_WriteType = CR_CHAN(insn->chanspec); + devpriv->tsk_Current = current; // Save the current process task structure + + switch (ui_WriteType) { + case APCI1710_INCCPT_ENABLELATCHINTERRUPT: + i_ReturnValue = i_APCI1710_EnableLatchInterrupt(dev, + (BYTE) CR_AREF(insn->chanspec)); + break; + + case APCI1710_INCCPT_DISABLELATCHINTERRUPT: + i_ReturnValue = i_APCI1710_DisableLatchInterrupt(dev, + (BYTE) CR_AREF(insn->chanspec)); + break; + + case APCI1710_INCCPT_WRITE16BITCOUNTERVALUE: + i_ReturnValue = i_APCI1710_Write16BitCounterValue(dev, + (BYTE) CR_AREF(insn->chanspec), + (BYTE) data[0], (UINT) data[1]); + break; + + case APCI1710_INCCPT_WRITE32BITCOUNTERVALUE: + i_ReturnValue = i_APCI1710_Write32BitCounterValue(dev, + (BYTE) CR_AREF(insn->chanspec), (ULONG) data[0]); + + break; + + case APCI1710_INCCPT_ENABLEINDEX: + i_APCI1710_EnableIndex(dev, (BYTE) CR_AREF(insn->chanspec)); + break; + + case APCI1710_INCCPT_DISABLEINDEX: + i_ReturnValue = i_APCI1710_DisableIndex(dev, + (BYTE) CR_AREF(insn->chanspec)); + break; + + case APCI1710_INCCPT_ENABLECOMPARELOGIC: + i_ReturnValue = i_APCI1710_EnableCompareLogic(dev, + (BYTE) CR_AREF(insn->chanspec)); + break; + + case APCI1710_INCCPT_DISABLECOMPARELOGIC: + i_ReturnValue = i_APCI1710_DisableCompareLogic(dev, + (BYTE) CR_AREF(insn->chanspec)); + break; + + case APCI1710_INCCPT_ENABLEFREQUENCYMEASUREMENT: + i_ReturnValue = i_APCI1710_EnableFrequencyMeasurement(dev, + (BYTE) CR_AREF(insn->chanspec), (BYTE) data[0]); + break; + + case APCI1710_INCCPT_DISABLEFREQUENCYMEASUREMENT: + i_ReturnValue = i_APCI1710_DisableFrequencyMeasurement(dev, + (BYTE) CR_AREF(insn->chanspec)); + break; + + default: + printk("Write Config Parameter Wrong\n"); + } + + if (i_ReturnValue >= 0) + i_ReturnValue = insn->n; + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_EnableLatchInterrupt | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr) | ++----------------------------------------------------------------------------+ +| Task : Enable the latch interrupt from selected module | +| (b_ModulNbr). Each software or hardware latch occur a | +| interrupt. | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure | +| (0 to 3) | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: No counter module found | +| -3: Counter not initialised see function | +| "i_APCI1710_InitCounter" | +| -4: Interrupt routine not installed see function | +| "i_APCI1710_SetBoardIntRoutine" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_EnableLatchInterrupt(comedi_device * dev, BYTE b_ModulNbr) +{ + INT i_ReturnValue = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv->s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + + /********************/ + /* Enable interrupt */ + /********************/ + + devpriv->s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister2 = devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister2 | APCI1710_ENABLE_LATCH_INT; + + /***************************/ + /* Write the configuration */ + /***************************/ + + outl(devpriv->s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + dw_ModeRegister1_2_3_4, devpriv->s_BoardInfos. + ui_Address + 20 + (64 * b_ModulNbr)); + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_DisableLatchInterrupt | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr) | ++----------------------------------------------------------------------------+ +| Task : Disable the latch interrupt from selected module | +| (b_ModulNbr). | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure | +| (0 to 3) | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: No counter module found | +| -3: Counter not initialised see function | +| "i_APCI1710_InitCounter" | +| -4: Interrupt routine not installed see function | +| "i_APCI1710_SetBoardIntRoutine" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_DisableLatchInterrupt(comedi_device * dev, BYTE b_ModulNbr) +{ + INT i_ReturnValue = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + + /***************************/ + /* Write the configuration */ + /***************************/ + + outl(devpriv->s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + dw_ModeRegister1_2_3_4 & + ((APCI1710_DISABLE_LATCH_INT << 8) | 0xFF), + devpriv->s_BoardInfos.ui_Address + 20 + + (64 * b_ModulNbr)); + + mdelay(1000); + + /*********************/ + /* Disable interrupt */ + /*********************/ + + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister2 = devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister2 & APCI1710_DISABLE_LATCH_INT; + + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_Write16BitCounterValue | +| (BYTE_ b_BoardHandle | +| BYTE_ b_ModulNbr, | +| BYTE_ b_SelectedCounter, | +| UINT_ ui_WriteValue) | ++----------------------------------------------------------------------------+ +| Task : Write a 16-Bit value (ui_WriteValue) in to the selected| +| 16-Bit counter (b_SelectedCounter) from selected module| +| (b_ModulNbr). | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure | +| (0 to 3) | +| BYTE_ b_SelectedCounter : Selected 16-Bit counter | +| (0 or 1) | +| UINT_ ui_WriteValue : 16-Bit write value | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: No counter module found | +| -3: Counter not initialised see function | +| "i_APCI1710_InitCounter" | +| -4: The selected 16-Bit counter parameter is wrong | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_Write16BitCounterValue(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_SelectedCounter, UINT ui_WriteValue) +{ + INT i_ReturnValue = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + /******************************/ + /* Test the counter selection */ + /******************************/ + + if (b_SelectedCounter < 2) { + /*******************/ + /* Write the value */ + /*******************/ + + outl((ULONG) ((ULONG) (ui_WriteValue) << (16 * + b_SelectedCounter)), + devpriv->s_BoardInfos.ui_Address + 8 + + (b_SelectedCounter * 4) + + (64 * b_ModulNbr)); + } else { + /**************************************************/ + /* The selected 16-Bit counter parameter is wrong */ + /**************************************************/ + + DPRINTK("The selected 16-Bit counter parameter is wrong\n"); + i_ReturnValue = -4; + } + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_Write32BitCounterValue | +| (BYTE_ b_BoardHandle | +| BYTE_ b_ModulNbr, | +| ULONG_ ul_WriteValue) | ++----------------------------------------------------------------------------+ +| Task : Write a 32-Bit value (ui_WriteValue) in to the selected| +| module (b_ModulNbr). | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure | +| (0 to 3) | +| ULONG_ ul_WriteValue : 32-Bit write value | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: No counter module found | +| -3: Counter not initialised see function | +| "i_APCI1710_InitCounter" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_Write32BitCounterValue(comedi_device * dev, + BYTE b_ModulNbr, ULONG ul_WriteValue) +{ + INT i_ReturnValue = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + /*******************/ + /* Write the value */ + /*******************/ + + outl(ul_WriteValue, devpriv->s_BoardInfos. + ui_Address + 4 + (64 * b_ModulNbr)); + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_EnableIndex (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr) | ++----------------------------------------------------------------------------+ +| Task : Enable the INDEX actions | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure | +| (0 to 3) | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: No counter module found | +| -3: Counter not initialised see function | +| "i_APCI1710_InitCounter" | +| -4: Index not initialised see function | +| "i_APCI1710_InitIndex" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_EnableIndex(comedi_device * dev, BYTE b_ModulNbr) +{ + INT i_ReturnValue = 0; + ULONG ul_InterruptLatchReg; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + /*****************************/ + /* Test if index initialised */ + /*****************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_IndexInit) { + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister2 = devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister2 | APCI1710_ENABLE_INDEX; + + ul_InterruptLatchReg = + inl(devpriv->s_BoardInfos.ui_Address + + 24 + (64 * b_ModulNbr)); + + outl(devpriv->s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + dw_ModeRegister1_2_3_4, + devpriv->s_BoardInfos.ui_Address + 20 + + (64 * b_ModulNbr)); + } else { + /*************************************************************/ + /* Index not initialised see function "i_APCI1710_InitIndex" */ + /*************************************************************/ + + DPRINTK("Index not initialised \n"); + i_ReturnValue = -4; + } + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_DisableIndex (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr) | ++----------------------------------------------------------------------------+ +| Task : Disable the INDEX actions | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure | +| (0 to 3) | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: No counter module found | +| -3: Counter not initialised see function | +| "i_APCI1710_InitCounter" | +| -4: Index not initialised see function | +| "i_APCI1710_InitIndex" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_DisableIndex(comedi_device * dev, BYTE b_ModulNbr) +{ + INT i_ReturnValue = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + /*****************************/ + /* Test if index initialised */ + /*****************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_IndexInit) { + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister2 = devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister2 & + APCI1710_DISABLE_INDEX; + + outl(devpriv->s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + dw_ModeRegister1_2_3_4, + devpriv->s_BoardInfos.ui_Address + 20 + + (64 * b_ModulNbr)); + } else { + /*************************************************************/ + /* Index not initialised see function "i_APCI1710_InitIndex" */ + /*************************************************************/ + + DPRINTK("Index not initialised \n"); + i_ReturnValue = -4; + } + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_EnableCompareLogic | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr) | ++----------------------------------------------------------------------------+ +| Task : Enable the 32-Bit compare logic. At that moment that | +| the incremental counter arrive to the compare value a | +| interrupt is generated. | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure | +| (0 to 3) | ++----------------------------------------------------------------------------+ +| Output Parameters : - ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: No counter module found | +| -3: Counter not initialised see function | +| "i_APCI1710_InitCounter" | +| -4: Compare logic not initialised. | +| See function "i_APCI1710_InitCompareLogic" | +| -5: Interrupt function not initialised. | +| See function "i_APCI1710_SetBoardIntRoutineX" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_EnableCompareLogic(comedi_device * dev, BYTE b_ModulNbr) +{ + INT i_ReturnValue = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + /*************************************/ + /* Test if compare logic initialised */ + /*************************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_InitFlag.b_CompareLogicInit == 1) { + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister3 = devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister3 | + APCI1710_ENABLE_COMPARE_INT; + + /***************************/ + /* Write the configuration */ + /***************************/ + + outl(devpriv->s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + dw_ModeRegister1_2_3_4, + devpriv->s_BoardInfos.ui_Address + 20 + + (64 * b_ModulNbr)); + } else { + /*********************************/ + /* Compare logic not initialised */ + /*********************************/ + + DPRINTK("Compare logic not initialised\n"); + i_ReturnValue = -4; + } + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_DisableCompareLogic | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr) | ++----------------------------------------------------------------------------+ +| Task : Disable the 32-Bit compare logic. ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure | +| (0 to 3) | ++----------------------------------------------------------------------------+ +| Output Parameters : - ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: No counter module found | +| -3: Counter not initialised see function | +| "i_APCI1710_InitCounter" | +| -4: Compare logic not initialised. | +| See function "i_APCI1710_InitCompareLogic" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_DisableCompareLogic(comedi_device * dev, BYTE b_ModulNbr) +{ + INT i_ReturnValue = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + /*************************************/ + /* Test if compare logic initialised */ + /*************************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_InitFlag.b_CompareLogicInit == 1) { + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister3 = devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister3 & + APCI1710_DISABLE_COMPARE_INT; + + /***************************/ + /* Write the configuration */ + /***************************/ + + outl(devpriv->s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + dw_ModeRegister1_2_3_4, + devpriv->s_BoardInfos.ui_Address + 20 + + (64 * b_ModulNbr)); + } else { + /*********************************/ + /* Compare logic not initialised */ + /*********************************/ + + DPRINTK("Compare logic not initialised\n"); + i_ReturnValue = -4; + } + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + + /* + +----------------------------------------------------------------------------+ + | Function Name : _INT_ i_APCI1710_EnableFrequencyMeasurement | + | (BYTE_ b_BoardHandle, | + | BYTE_ b_ModulNbr, | + | BYTE_ b_InterruptEnable) | + +----------------------------------------------------------------------------+ + | Task : Enables the frequency measurement function | + +----------------------------------------------------------------------------+ + | Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | + | BYTE_ b_ModulNbr : Number of the module to be | + | configured (0 to 3) | + | BYTE_ b_InterruptEnable: Enable or disable the | + | interrupt. | + | APCI1710_ENABLE: | + | Enable the interrupt | + | APCI1710_DISABLE: | + | Disable the interrupt | + +----------------------------------------------------------------------------+ + | Output Parameters : - | + +----------------------------------------------------------------------------+ + | Return Value : 0: No error | + | -1: The handle parameter of the board is wrong | + | -2: The selected module number is wrong | + | -3: Counter not initialised see function | + | "i_APCI1710_InitCounter" | + | -4: Frequency measurement logic not initialised. | + | See function "i_APCI1710_InitFrequencyMeasurement" | + | -5: Interrupt parameter is wrong | + | -6: Interrupt function not initialised. | + +----------------------------------------------------------------------------+ + */ + +INT i_APCI1710_EnableFrequencyMeasurement(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_InterruptEnable) +{ + INT i_ReturnValue = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + /********************************************/ + /* Test if frequency mesurement initialised */ + /********************************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_InitFlag.b_FrequencyMeasurementInit == 1) { + /***************************/ + /* Test the interrupt mode */ + /***************************/ + + if ((b_InterruptEnable == APCI1710_DISABLE) || + (b_InterruptEnable == APCI1710_ENABLE)) + { + + /************************************/ + /* Enable the frequency measurement */ + /************************************/ + + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister3 = devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister3 | + APCI1710_ENABLE_FREQUENCY; + + /*********************************************/ + /* Disable or enable the frequency interrupt */ + /*********************************************/ + + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister3 = (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister3 & + APCI1710_DISABLE_FREQUENCY_INT) + | (b_InterruptEnable << 3); + + /***************************/ + /* Write the configuration */ + /***************************/ + + outl(devpriv->s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + dw_ModeRegister1_2_3_4, + devpriv->s_BoardInfos. + ui_Address + 20 + + (64 * b_ModulNbr)); + + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_InitFlag. + b_FrequencyMeasurementEnable = + 1; + } else { + /********************************/ + /* Interrupt parameter is wrong */ + /********************************/ + + DPRINTK("Interrupt parameter is wrong\n"); + i_ReturnValue = -5; + } + } else { + /***********************************************/ + /* Frequency measurement logic not initialised */ + /***********************************************/ + + DPRINTK("Frequency measurement logic not initialised\n"); + i_ReturnValue = -4; + } + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + + /* + +----------------------------------------------------------------------------+ + | Function Name : _INT_ i_APCI1710_DisableFrequencyMeasurement | + | (BYTE_ b_BoardHandle, | + | BYTE_ b_ModulNbr) | + +----------------------------------------------------------------------------+ + | Task : Disables the frequency measurement function | + +----------------------------------------------------------------------------+ + | Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | + | BYTE_ b_ModulNbr : Number of the module to be | + | configured (0 to 3) | + +----------------------------------------------------------------------------+ + | Output Parameters : - | + +----------------------------------------------------------------------------+ + | Return Value : 0: No error | + | -1: The handle parameter of the board is wrong | + | -2: The selected module number is wrong | + | -3: Counter not initialised see function | + | "i_APCI1710_InitCounter" | + | -4: Frequency measurement logic not initialised. | + | See function "i_APCI1710_InitFrequencyMeasurement" | + +----------------------------------------------------------------------------+ + */ + +INT i_APCI1710_DisableFrequencyMeasurement(comedi_device * dev, BYTE b_ModulNbr) +{ + INT i_ReturnValue = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + /********************************************/ + /* Test if frequency mesurement initialised */ + /********************************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_InitFlag.b_FrequencyMeasurementInit == 1) { + /*************************************/ + /* Disable the frequency measurement */ + /*************************************/ + + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister3 = devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister3 & + APCI1710_DISABLE_FREQUENCY + // Begin CG 29/06/01 CG 1100/0231 -> 0701/0232 Frequence measure IRQ must be cleared + & APCI1710_DISABLE_FREQUENCY_INT; + // End CG 29/06/01 CG 1100/0231 -> 0701/0232 Frequence measure IRQ must be cleared + + /***************************/ + /* Write the configuration */ + /***************************/ + + outl(devpriv->s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + dw_ModeRegister1_2_3_4, + devpriv->s_BoardInfos.ui_Address + 20 + + (64 * b_ModulNbr)); + + /*************************************/ + /* Disable the frequency measurement */ + /*************************************/ + + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_InitFlag. + b_FrequencyMeasurementEnable = 0; + } else { + /***********************************************/ + /* Frequency measurement logic not initialised */ + /***********************************************/ + + DPRINTK("Frequency measurement logic not initialised\n"); + i_ReturnValue = -4; + } + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/*########################################################################### */ + + // INSN READ + +/*########################################################################### */ + +/* ++----------------------------------------------------------------------------+ +| Function Name :INT i_APCI1710_InsnWriteINCCPT(comedi_device *dev,comedi_subdevice *s, +comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Read and Get functions for INC_CPT | ++----------------------------------------------------------------------------+ +| Input Parameters : ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : ++----------------------------------------------------------------------------+ +*/ +INT i_APCI1710_InsnReadINCCPT(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_ReadType; + INT i_ReturnValue = 0; + + ui_ReadType = CR_CHAN(insn->chanspec); + + devpriv->tsk_Current = current; // Save the current process task structure + switch (ui_ReadType) { + case APCI1710_INCCPT_READLATCHREGISTERSTATUS: + i_ReturnValue = i_APCI1710_ReadLatchRegisterStatus(dev, + (BYTE) CR_AREF(insn->chanspec), + (BYTE) CR_RANGE(insn->chanspec), (PBYTE) & data[0]); + break; + + case APCI1710_INCCPT_READLATCHREGISTERVALUE: + i_ReturnValue = i_APCI1710_ReadLatchRegisterValue(dev, + (BYTE) CR_AREF(insn->chanspec), + (BYTE) CR_RANGE(insn->chanspec), (PULONG) & data[0]); + printk("Latch Register Value %d\n", data[0]); + break; + + case APCI1710_INCCPT_READ16BITCOUNTERVALUE: + i_ReturnValue = i_APCI1710_Read16BitCounterValue(dev, + (BYTE) CR_AREF(insn->chanspec), + (BYTE) CR_RANGE(insn->chanspec), (PUINT) & data[0]); + break; + + case APCI1710_INCCPT_READ32BITCOUNTERVALUE: + i_ReturnValue = i_APCI1710_Read32BitCounterValue(dev, + (BYTE) CR_AREF(insn->chanspec), (PULONG) & data[0]); + break; + + case APCI1710_INCCPT_GETINDEXSTATUS: + i_ReturnValue = i_APCI1710_GetIndexStatus(dev, + (BYTE) CR_AREF(insn->chanspec), (PBYTE) & data[0]); + break; + + case APCI1710_INCCPT_GETREFERENCESTATUS: + i_ReturnValue = i_APCI1710_GetReferenceStatus(dev, + (BYTE) CR_AREF(insn->chanspec), (PBYTE) & data[0]); + break; + + case APCI1710_INCCPT_GETUASSTATUS: + i_ReturnValue = i_APCI1710_GetUASStatus(dev, + (BYTE) CR_AREF(insn->chanspec), (PBYTE) & data[0]); + break; + + case APCI1710_INCCPT_GETCBSTATUS: + i_ReturnValue = i_APCI1710_GetCBStatus(dev, + (BYTE) CR_AREF(insn->chanspec), (PBYTE) & data[0]); + break; + + case APCI1710_INCCPT_GET16BITCBSTATUS: + i_ReturnValue = i_APCI1710_Get16BitCBStatus(dev, + (BYTE) CR_AREF(insn->chanspec), + (PBYTE) & data[0], (PBYTE) & data[1]); + break; + + case APCI1710_INCCPT_GETUDSTATUS: + i_ReturnValue = i_APCI1710_GetUDStatus(dev, + (BYTE) CR_AREF(insn->chanspec), (PBYTE) & data[0]); + + break; + + case APCI1710_INCCPT_GETINTERRUPTUDLATCHEDSTATUS: + i_ReturnValue = i_APCI1710_GetInterruptUDLatchedStatus(dev, + (BYTE) CR_AREF(insn->chanspec), (PBYTE) & data[0]); + break; + + case APCI1710_INCCPT_READFREQUENCYMEASUREMENT: + i_ReturnValue = i_APCI1710_ReadFrequencyMeasurement(dev, + (BYTE) CR_AREF(insn->chanspec), + (PBYTE) & data[0], + (PBYTE) & data[1], (PULONG) & data[2]); + break; + + case APCI1710_INCCPT_READINTERRUPT: + data[0] = devpriv->s_InterruptParameters. + s_FIFOInterruptParameters[devpriv-> + s_InterruptParameters.ui_Read].b_OldModuleMask; + data[1] = devpriv->s_InterruptParameters. + s_FIFOInterruptParameters[devpriv-> + s_InterruptParameters.ui_Read].ul_OldInterruptMask; + data[2] = devpriv->s_InterruptParameters. + s_FIFOInterruptParameters[devpriv-> + s_InterruptParameters.ui_Read].ul_OldCounterLatchValue; + + /**************************/ + /* Increment the read FIFO */ + /***************************/ + + devpriv-> + s_InterruptParameters. + ui_Read = (devpriv->s_InterruptParameters. + ui_Read + 1) % APCI1710_SAVE_INTERRUPT; + + break; + + default: + printk("ReadType Parameter wrong\n"); + } + + if (i_ReturnValue >= 0) + i_ReturnValue = insn->n; + return (i_ReturnValue); + +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_ReadLatchRegisterStatus | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_LatchReg, | +| PBYTE_ pb_LatchStatus) | ++----------------------------------------------------------------------------+ +| Task : Read the latch register status from selected module | +| (b_ModulNbr) and selected latch register (b_LatchReg). | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure | +| (0 to 3) | +| BYTE_ b_LatchReg : Selected latch register | +| 0 : for the first latch register | +| 1 : for the second latch register | ++----------------------------------------------------------------------------+ +| Output Parameters : PBYTE_ pb_LatchStatus : Latch register status. | +| 0 : No latch occur | +| 1 : A software latch occur | +| 2 : A hardware latch occur | +| 3 : A software and hardware | +| latch occur | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: No counter module found | +| -3: Counter not initialised see function | +| "i_APCI1710_InitCounter" | +| -4: The selected latch register parameter is wrong | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_ReadLatchRegisterStatus(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_LatchReg, PBYTE pb_LatchStatus) +{ + INT i_ReturnValue = 0; + DWORD dw_LatchReg; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + /*************************************/ + /* Test the latch register parameter */ + /*************************************/ + + if (b_LatchReg < 2) { + dw_LatchReg = inl(devpriv->s_BoardInfos. + ui_Address + (64 * b_ModulNbr)); + + *pb_LatchStatus = + (BYTE) ((dw_LatchReg >> (b_LatchReg * + 4)) & 0x3); + } else { + /**************************************************/ + /* The selected latch register parameter is wrong */ + /**************************************************/ + + DPRINTK("The selected latch register parameter is wrong\n"); + i_ReturnValue = -4; + } + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_ReadLatchRegisterValue | +| (BYTE_ b_BoardHandle,| +| BYTE_ b_ModulNbr, | +| BYTE_ b_LatchReg, | +| PULONG_ pul_LatchValue) | ++----------------------------------------------------------------------------+ +| Task : Read the latch register value from selected module | +| (b_ModulNbr) and selected latch register (b_LatchReg). | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure | +| (0 to 3) | +| BYTE_ b_LatchReg : Selected latch register | +| 0 : for the first latch register | +| 1 : for the second latch register | ++----------------------------------------------------------------------------+ +| Output Parameters : PULONG_ pul_LatchValue : Latch register value | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: No counter module found | +| -3: Counter not initialised see function | +| "i_APCI1710_InitCounter" | +| -4: The selected latch register parameter is wrong | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_ReadLatchRegisterValue(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_LatchReg, PULONG pul_LatchValue) +{ + INT i_ReturnValue = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + /*************************************/ + /* Test the latch register parameter */ + /*************************************/ + + if (b_LatchReg < 2) { + *pul_LatchValue = inl(devpriv->s_BoardInfos. + ui_Address + ((b_LatchReg + 1) * 4) + + (64 * b_ModulNbr)); + + } else { + /**************************************************/ + /* The selected latch register parameter is wrong */ + /**************************************************/ + + DPRINTK("The selected latch register parameter is wrong\n"); + i_ReturnValue = -4; + } + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_Read16BitCounterValue | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_SelectedCounter, | +| PUINT_ pui_CounterValue) | ++----------------------------------------------------------------------------+ +| Task : Latch the selected 16-Bit counter (b_SelectedCounter) | +| from selected module (b_ModulNbr) in to the first | +| latch register and return the latched value. | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure | +| (0 to 3) | +| BYTE_ b_SelectedCounter : Selected 16-Bit counter | +| (0 or 1) | ++----------------------------------------------------------------------------+ +| Output Parameters : PUINT_ pui_CounterValue : 16-Bit counter value | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: No counter module found | +| -3: Counter not initialised see function | +| "i_APCI1710_InitCounter" | +| -4: The selected 16-Bit counter parameter is wrong | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_Read16BitCounterValue(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_SelectedCounter, PUINT pui_CounterValue) +{ + INT i_ReturnValue = 0; + DWORD dw_LathchValue = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + /******************************/ + /* Test the counter selection */ + /******************************/ + + if (b_SelectedCounter < 2) { + /*********************/ + /* Latch the counter */ + /*********************/ + + outl(1, devpriv->s_BoardInfos. + ui_Address + (64 * b_ModulNbr)); + + /************************/ + /* Read the latch value */ + /************************/ + + dw_LathchValue = inl(devpriv->s_BoardInfos. + ui_Address + 4 + (64 * b_ModulNbr)); + + *pui_CounterValue = + (UINT) ((dw_LathchValue >> (16 * + b_SelectedCounter)) & + 0xFFFFU); + } else { + /**************************************************/ + /* The selected 16-Bit counter parameter is wrong */ + /**************************************************/ + + DPRINTK("The selected 16-Bit counter parameter is wrong\n"); + i_ReturnValue = -4; + } + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_Read32BitCounterValue | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| PULONG_ pul_CounterValue) | ++----------------------------------------------------------------------------+ +| Task : Latch the 32-Bit counter from selected module | +| (b_ModulNbr) in to the first latch register and return | +| the latched value. | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure | +| (0 to 3) | ++----------------------------------------------------------------------------+ +| Output Parameters : PULONG_ pul_CounterValue : 32-Bit counter value | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: No counter module found | +| -3: Counter not initialised see function | +| "i_APCI1710_InitCounter" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_Read32BitCounterValue(comedi_device * dev, + BYTE b_ModulNbr, PULONG pul_CounterValue) +{ + INT i_ReturnValue = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + /*********************/ + /* Tatch the counter */ + /*********************/ + + outl(1, devpriv->s_BoardInfos. + ui_Address + (64 * b_ModulNbr)); + + /************************/ + /* Read the latch value */ + /************************/ + + *pul_CounterValue = inl(devpriv->s_BoardInfos. + ui_Address + 4 + (64 * b_ModulNbr)); + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_GetIndexStatus (BYTE_ b_BoardHandle,| +| BYTE_ b_ModulNbr, | +| PBYTE_ pb_IndexStatus)| ++----------------------------------------------------------------------------+ +| Task : Return the index status | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure | +| (0 to 3) | ++----------------------------------------------------------------------------+ +| Output Parameters : PBYTE_ pb_IndexStatus : 0 : No INDEX occur | +| 1 : A INDEX occur | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: No counter module found | +| -3: Counter not initialised see function | +| "i_APCI1710_InitCounter" | +| -4: Index not initialised see function | +| "i_APCI1710_InitIndex" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_GetIndexStatus(comedi_device * dev, + BYTE b_ModulNbr, PBYTE pb_IndexStatus) +{ + INT i_ReturnValue = 0; + DWORD dw_StatusReg = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + /*****************************/ + /* Test if index initialised */ + /*****************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_IndexInit) { + dw_StatusReg = inl(devpriv->s_BoardInfos. + ui_Address + 12 + (64 * b_ModulNbr)); + + *pb_IndexStatus = (BYTE) (dw_StatusReg & 1); + } else { + /*************************************************************/ + /* Index not initialised see function "i_APCI1710_InitIndex" */ + /*************************************************************/ + + DPRINTK("Index not initialised\n"); + i_ReturnValue = -4; + } + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_GetReferenceStatus | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| PBYTE_ pb_ReferenceStatus) | ++----------------------------------------------------------------------------+ +| Task : Return the reference status | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure | +| (0 to 3) | ++----------------------------------------------------------------------------+ +| Output Parameters : PBYTE_ pb_ReferenceStatus : 0 : No REFERENCE occur | +| 1 : A REFERENCE occur | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: No counter module found | +| -3: Counter not initialised see function | +| "i_APCI1710_InitCounter" | +| -4: Reference not initialised see function | +| "i_APCI1710_InitReference" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_GetReferenceStatus(comedi_device * dev, + BYTE b_ModulNbr, PBYTE pb_ReferenceStatus) +{ + INT i_ReturnValue = 0; + DWORD dw_StatusReg = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + /*********************************/ + /* Test if reference initialised */ + /*********************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_InitFlag.b_ReferenceInit) { + dw_StatusReg = inl(devpriv->s_BoardInfos. + ui_Address + 24 + (64 * b_ModulNbr)); + + *pb_ReferenceStatus = + (BYTE) (~dw_StatusReg & 1); + } else { + /*********************************************************************/ + /* Reference not initialised see function "i_APCI1710_InitReference" */ + /*********************************************************************/ + + DPRINTK("Reference not initialised\n"); + i_ReturnValue = -4; + } + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_GetUASStatus | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| PBYTE_ pb_UASStatus) | ++----------------------------------------------------------------------------+ +| Task : Return the error signal (UAS) status | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure | +| (0 to 3) | ++----------------------------------------------------------------------------+ +| Output Parameters : PBYTE_ pb_UASStatus : 0 : UAS is low "0" | +| 1 : UAS is high "1" | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: No counter module found | +| -3: Counter not initialised see function | +| "i_APCI1710_InitCounter" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_GetUASStatus(comedi_device * dev, + BYTE b_ModulNbr, PBYTE pb_UASStatus) +{ + INT i_ReturnValue = 0; + DWORD dw_StatusReg = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + dw_StatusReg = inl(devpriv->s_BoardInfos. + ui_Address + 24 + (64 * b_ModulNbr)); + + *pb_UASStatus = (BYTE) ((dw_StatusReg >> 1) & 1); + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_GetCBStatus | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| PBYTE_ pb_CBStatus) | ++----------------------------------------------------------------------------+ +| Task : Return the counter overflow status | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure | +| (0 to 3) | ++----------------------------------------------------------------------------+ +| Output Parameters : PBYTE_ pb_CBStatus : 0 : Counter no overflow | +| 1 : Counter overflow | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: No counter module found | +| -3: Counter not initialised see function | +| "i_APCI1710_InitCounter" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_GetCBStatus(comedi_device * dev, + BYTE b_ModulNbr, PBYTE pb_CBStatus) +{ + INT i_ReturnValue = 0; + DWORD dw_StatusReg = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + dw_StatusReg = inl(devpriv->s_BoardInfos. + ui_Address + 16 + (64 * b_ModulNbr)); + + *pb_CBStatus = (BYTE) (dw_StatusReg & 1); + + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_Get16BitCBStatus | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| PBYTE_ pb_CBStatusCounter0, | +| PBYTE_ pb_CBStatusCounter1) | ++----------------------------------------------------------------------------+ +| Task : Returns the counter overflow (counter initialised to | +| 2*16-bit) status from selected incremental counter | +| module | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure | +| (0 to 3) | ++----------------------------------------------------------------------------+ +| Output Parameters : PBYTE_ pb_CBStatusCounter0 : 0 : No overflow occur for | +| the first 16-bit | +| counter | +| 1 : Overflow occur for the| +| first 16-bit counter | +| PBYTE_ pb_CBStatusCounter1 : 0 : No overflow occur for | +| the second 16-bit | +| counter | +| 1 : Overflow occur for the| +| second 16-bit counter | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: No counter module found | +| -3: Counter not initialised see function | +| "i_APCI1710_InitCounter" | +| -4: Counter not initialised to 2*16-bit mode. | +| See function "i_APCI1710_InitCounter" | +| -5: Firmware revision error | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_Get16BitCBStatus(comedi_device * dev, + BYTE b_ModulNbr, PBYTE pb_CBStatusCounter0, PBYTE pb_CBStatusCounter1) +{ + INT i_ReturnValue = 0; + DWORD dw_StatusReg = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + /*************************/ + /* Test if 2*16-Bit mode */ + /*************************/ + + if ((devpriv->s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister1 & 0x10) == 0x10) { + /*****************************/ + /* Test the Firmware version */ + /*****************************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration + [b_ModulNbr] & 0xFFFF) >= + 0x3136) { + dw_StatusReg = + inl(devpriv->s_BoardInfos. + ui_Address + 16 + + (64 * b_ModulNbr)); + + *pb_CBStatusCounter1 = + (BYTE) ((dw_StatusReg >> 0) & + 1); + *pb_CBStatusCounter0 = + (BYTE) ((dw_StatusReg >> 1) & + 1); + } // if ((ps_APCI1710Variable->s_Board [b_BoardHandle].s_BoardInfos.dw_MolduleConfiguration [b_ModulNbr] & 0xFFFF) >= 0x3136) + else { + /****************************/ + /* Firmware revision error */ + /****************************/ + + i_ReturnValue = -5; + } // if ((ps_APCI1710Variable->s_Board [b_BoardHandle].s_BoardInfos.dw_MolduleConfiguration [b_ModulNbr] & 0xFFFF) >= 0x3136) + } // if ((ps_APCI1710Variable->s_Board [b_BoardHandle].s_ModuleInfo [b_ModulNbr].s_SiemensCounterInfo.s_ModeRegister.s_ByteModeRegister.b_ModeRegister1 & 0x10) == 0x10) + else { + /********************************************/ + /* Counter not initialised to 2*16-bit mode */ + /* "i_APCI1710_InitCounter" */ + /********************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -4; + } // if ((ps_APCI1710Variable->s_Board [b_BoardHandle].s_ModuleInfo [b_ModulNbr].s_SiemensCounterInfo.s_ModeRegister.s_ByteModeRegister.b_ModeRegister1 & 0x10) == 0x10) + } // if (ps_APCI1710Variable->s_Board [b_BoardHandle].s_ModuleInfo [b_ModulNbr].s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) + else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } // if (ps_APCI1710Variable->s_Board [b_BoardHandle].s_ModuleInfo [b_ModulNbr].s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) + } // if (b_ModulNbr < 4) + else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } // if (b_ModulNbr < 4) + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_GetUDStatus | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| PBYTE_ pb_UDStatus) | ++----------------------------------------------------------------------------+ +| Task : Return the counter progress status | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure | +| (0 to 3) | ++----------------------------------------------------------------------------+ +| Output Parameters : PBYTE_ pb_UDStatus : 0 : Counter progress in the | +| selected mode down | +| 1 : Counter progress in the | +| selected mode up | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: No counter module found | +| -3: Counter not initialised see function | +| "i_APCI1710_InitCounter" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_GetUDStatus(comedi_device * dev, + BYTE b_ModulNbr, PBYTE pb_UDStatus) +{ + INT i_ReturnValue = 0; + DWORD dw_StatusReg = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + dw_StatusReg = inl(devpriv->s_BoardInfos. + ui_Address + 24 + (64 * b_ModulNbr)); + + *pb_UDStatus = (BYTE) ((dw_StatusReg >> 2) & 1); + + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_GetInterruptUDLatchedStatus | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| PBYTE_ pb_UDStatus) | ++----------------------------------------------------------------------------+ +| Task : Return the counter progress latched status after a | +| index interrupt occur. | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure | +| (0 to 3) | ++----------------------------------------------------------------------------+ +| Output Parameters : PBYTE_ pb_UDStatus : 0 : Counter progress in the | +| selected mode down | +| 1 : Counter progress in the | +| selected mode up | +| 2 : No index interrupt occur | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: No counter module found | +| -3: Counter not initialised see function | +| "i_APCI1710_InitCounter" | +| -4: Interrupt function not initialised. | +| See function "i_APCI1710_SetBoardIntRoutineX" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_GetInterruptUDLatchedStatus(comedi_device * dev, + BYTE b_ModulNbr, PBYTE pb_UDStatus) +{ + INT i_ReturnValue = 0; + DWORD dw_StatusReg = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + /*********************************/ + /* Test if index interrupt occur */ + /*********************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_InitFlag.b_IndexInterruptOccur == 1) { + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_InitFlag.b_IndexInterruptOccur = 0; + + dw_StatusReg = inl(devpriv->s_BoardInfos. + ui_Address + 12 + (64 * b_ModulNbr)); + + *pb_UDStatus = (BYTE) ((dw_StatusReg >> 1) & 1); + } else { + /****************************/ + /* No index interrupt occur */ + /****************************/ + + *pb_UDStatus = 2; + } + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + + /* + +----------------------------------------------------------------------------+ + | Function Name : _INT_ i_APCI1710_ReadFrequencyMeasurement | + | (BYTE_ b_BoardHandle, | + | BYTE_ b_ModulNbr, | + | PBYTE_ pb_Status, | + | PULONG_ pul_ReadValue) | + +----------------------------------------------------------------------------+ + | Task : Returns the status (pb_Status) and the number of | + | increments in the set time. | + | See function " i_APCI1710_InitFrequencyMeasurement " | + +----------------------------------------------------------------------------+ + | Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | + | BYTE_ b_ModulNbr : Number of the module to be | + | configured (0 to 3) | + +----------------------------------------------------------------------------+ + | Output Parameters : PBYTE_ pb_Status : Returns the frequency | + | measurement status | + | 0 : Counting cycle not | + | started. | + | 1 : Counting cycle started. | + | 2 : Counting cycle stopped. | + | The measurement cycle is | + | completed. | + | PBYTE_ pb_UDStatus : 0 : Counter progress in the | + | selected mode down | + | 1 : Counter progress in the | + | selected mode up | + | PULONG_ pul_ReadValue : Return the number of | + | increments in the defined | + | time base. | + +----------------------------------------------------------------------------+ + | Return Value : 0: No error | + | -1: The handle parameter of the board is wrong | + | -2: The selected module number is wrong | + | -3: Counter not initialised see function | + | "i_APCI1710_InitCounter" | + | -4: Frequency measurement logic not initialised. | + | See function "i_APCI1710_InitFrequencyMeasurement" | + +----------------------------------------------------------------------------+ + */ + +INT i_APCI1710_ReadFrequencyMeasurement(comedi_device * dev, + BYTE b_ModulNbr, + PBYTE pb_Status, PBYTE pb_UDStatus, PULONG pul_ReadValue) +{ + INT i_ReturnValue = 0; + UINT ui_16BitValue; + DWORD dw_StatusReg; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) { + /********************************************/ + /* Test if frequency mesurement initialised */ + /********************************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_InitFlag.b_FrequencyMeasurementInit == 1) { + /******************/ + /* Test if enable */ + /******************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SiemensCounterInfo. + s_InitFlag. + b_FrequencyMeasurementEnable == 1) { + /*******************/ + /* Read the status */ + /*******************/ + + dw_StatusReg = + inl(devpriv->s_BoardInfos. + ui_Address + 32 + + (64 * b_ModulNbr)); + + /**************************/ + /* Test if frequency stop */ + /**************************/ + + if (dw_StatusReg & 1) { + *pb_Status = 2; + *pb_UDStatus = + (BYTE) ((dw_StatusReg >> + 1) & 3); + + /******************/ + /* Read the value */ + /******************/ + + *pul_ReadValue = + inl(devpriv-> + s_BoardInfos. + ui_Address + 28 + + (64 * b_ModulNbr)); + + if (*pb_UDStatus == 0) { + /*************************/ + /* Test the counter mode */ + /*************************/ + + if ((devpriv->s_ModuleInfo[b_ModulNbr].s_SiemensCounterInfo.s_ModeRegister.s_ByteModeRegister.b_ModeRegister1 & APCI1710_16BIT_COUNTER) == APCI1710_16BIT_COUNTER) { + /****************************************/ + /* Test if 16-bit counter 1 pulse occur */ + /****************************************/ + + if ((*pul_ReadValue & 0xFFFFU) != 0) { + ui_16BitValue + = + (UINT) + * + pul_ReadValue + & + 0xFFFFU; + *pul_ReadValue + = + (*pul_ReadValue + & + 0xFFFF0000UL) + | + (0xFFFFU + - + ui_16BitValue); + } + + /****************************************/ + /* Test if 16-bit counter 2 pulse occur */ + /****************************************/ + + if ((*pul_ReadValue & 0xFFFF0000UL) != 0) { + ui_16BitValue + = + (UINT) + ( + (*pul_ReadValue + >> + 16) + & + 0xFFFFU); + *pul_ReadValue + = + (*pul_ReadValue + & + 0xFFFFUL) + | + ( + (0xFFFFU - ui_16BitValue) << 16); + } + } else { + if (*pul_ReadValue != 0) { + *pul_ReadValue + = + 0xFFFFFFFFUL + - + *pul_ReadValue; + } + } + } else { + if (*pb_UDStatus == 1) { + /****************************************/ + /* Test if 16-bit counter 2 pulse occur */ + /****************************************/ + + if ((*pul_ReadValue & 0xFFFF0000UL) != 0) { + ui_16BitValue + = + (UINT) + ( + (*pul_ReadValue + >> + 16) + & + 0xFFFFU); + *pul_ReadValue + = + (*pul_ReadValue + & + 0xFFFFUL) + | + ( + (0xFFFFU - ui_16BitValue) << 16); + } + } else { + if (*pb_UDStatus + == 2) { + /****************************************/ + /* Test if 16-bit counter 1 pulse occur */ + /****************************************/ + + if ((*pul_ReadValue & 0xFFFFU) != 0) { + ui_16BitValue + = + (UINT) + * + pul_ReadValue + & + 0xFFFFU; + *pul_ReadValue + = + (*pul_ReadValue + & + 0xFFFF0000UL) + | + (0xFFFFU + - + ui_16BitValue); + } + } + } + } + } else { + *pb_Status = 1; + *pb_UDStatus = 0; + } + } else { + *pb_Status = 0; + *pb_UDStatus = 0; + } + } else { + /***********************************************/ + /* Frequency measurement logic not initialised */ + /***********************************************/ + + DPRINTK("Frequency measurement logic not initialised\n"); + i_ReturnValue = -4; + } + } else { + /****************************************/ + /* Counter not initialised see function */ + /* "i_APCI1710_InitCounter" */ + /****************************************/ + + DPRINTK("Counter not initialised\n"); + i_ReturnValue = -3; + } + } else { + /*************************************************/ + /* The selected module number parameter is wrong */ + /*************************************************/ + + DPRINTK("The selected module number parameter is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.h @@ -0,0 +1,269 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ + +#define APCI1710_16BIT_COUNTER 0x10 +#define APCI1710_32BIT_COUNTER 0x0 +#define APCI1710_QUADRUPLE_MODE 0x0 +#define APCI1710_DOUBLE_MODE 0x3 +#define APCI1710_SIMPLE_MODE 0xF +#define APCI1710_DIRECT_MODE 0x80 +#define APCI1710_HYSTERESIS_ON 0x60 +#define APCI1710_HYSTERESIS_OFF 0x0 +#define APCI1710_INCREMENT 0x60 +#define APCI1710_DECREMENT 0x0 +#define APCI1710_LATCH_COUNTER 0x1 +#define APCI1710_CLEAR_COUNTER 0x0 +#define APCI1710_LOW 0x0 +#define APCI1710_HIGH 0x1 + +/*********************/ +/* Version 0600-0229 */ +/*********************/ + +#define APCI1710_HIGH_EDGE_CLEAR_COUNTER 0x0 +#define APCI1710_HIGH_EDGE_LATCH_COUNTER 0x1 +#define APCI1710_LOW_EDGE_CLEAR_COUNTER 0x2 +#define APCI1710_LOW_EDGE_LATCH_COUNTER 0x3 +#define APCI1710_HIGH_EDGE_LATCH_AND_CLEAR_COUNTER 0x4 +#define APCI1710_LOW_EDGE_LATCH_AND_CLEAR_COUNTER 0x5 +#define APCI1710_SOURCE_0 0x0 +#define APCI1710_SOURCE_1 0x1 + +#define APCI1710_30MHZ 30 +#define APCI1710_33MHZ 33 +#define APCI1710_40MHZ 40 + +#define APCI1710_ENABLE_LATCH_INT 0x80 +#define APCI1710_DISABLE_LATCH_INT (~APCI1710_ENABLE_LATCH_INT) + +#define APCI1710_INDEX_LATCH_COUNTER 0x10 +#define APCI1710_INDEX_AUTO_MODE 0x8 +#define APCI1710_ENABLE_INDEX 0x4 +#define APCI1710_DISABLE_INDEX (~APCI1710_ENABLE_INDEX) +#define APCI1710_ENABLE_LATCH_AND_CLEAR 0x8 +#define APCI1710_DISABLE_LATCH_AND_CLEAR (~APCI1710_ENABLE_LATCH_AND_CLEAR) +#define APCI1710_SET_LOW_INDEX_LEVEL 0x4 +#define APCI1710_SET_HIGH_INDEX_LEVEL (~APCI1710_SET_LOW_INDEX_LEVEL) +#define APCI1710_INVERT_INDEX_RFERENCE 0x2 +#define APCI1710_DEFAULT_INDEX_RFERENCE (~APCI1710_INVERT_INDEX_RFERENCE) + +#define APCI1710_ENABLE_INDEX_INT 0x1 +#define APCI1710_DISABLE_INDEX_INT (~APCI1710_ENABLE_INDEX_INT) + +#define APCI1710_ENABLE_FREQUENCY 0x4 +#define APCI1710_DISABLE_FREQUENCY (~APCI1710_ENABLE_FREQUENCY) + +#define APCI1710_ENABLE_FREQUENCY_INT 0x8 +#define APCI1710_DISABLE_FREQUENCY_INT (~APCI1710_ENABLE_FREQUENCY_INT) + +#define APCI1710_ENABLE_40MHZ_FREQUENCY 0x40 +#define APCI1710_DISABLE_40MHZ_FREQUENCY (~APCI1710_ENABLE_40MHZ_FREQUENCY) + +#define APCI1710_ENABLE_40MHZ_FILTER 0x80 +#define APCI1710_DISABLE_40MHZ_FILTER (~APCI1710_ENABLE_40MHZ_FILTER) + +#define APCI1710_ENABLE_COMPARE_INT 0x2 +#define APCI1710_DISABLE_COMPARE_INT (~APCI1710_ENABLE_COMPARE_INT) + +#define APCI1710_ENABLE_INDEX_ACTION 0x20 +#define APCI1710_DISABLE_INDEX_ACTION (~APCI1710_ENABLE_INDEX_ACTION) +#define APCI1710_REFERENCE_HIGH 0x40 +#define APCI1710_REFERENCE_LOW (~APCI1710_REFERENCE_HIGH) + +#define APCI1710_TOR_GATE_LOW 0x40 +#define APCI1710_TOR_GATE_HIGH (~APCI1710_TOR_GATE_LOW) + +// INSN CONFIG +#define APCI1710_INCCPT_INITCOUNTER 100 +#define APCI1710_INCCPT_COUNTERAUTOTEST 101 +#define APCI1710_INCCPT_INITINDEX 102 +#define APCI1710_INCCPT_INITREFERENCE 103 +#define APCI1710_INCCPT_INITEXTERNALSTROBE 104 +#define APCI1710_INCCPT_INITCOMPARELOGIC 105 +#define APCI1710_INCCPT_INITFREQUENCYMEASUREMENT 106 + +// INSN READ +#define APCI1710_INCCPT_READLATCHREGISTERSTATUS 200 +#define APCI1710_INCCPT_READLATCHREGISTERVALUE 201 +#define APCI1710_INCCPT_READ16BITCOUNTERVALUE 202 +#define APCI1710_INCCPT_READ32BITCOUNTERVALUE 203 +#define APCI1710_INCCPT_GETINDEXSTATUS 204 +#define APCI1710_INCCPT_GETREFERENCESTATUS 205 +#define APCI1710_INCCPT_GETUASSTATUS 206 +#define APCI1710_INCCPT_GETCBSTATUS 207 +#define APCI1710_INCCPT_GET16BITCBSTATUS 208 +#define APCI1710_INCCPT_GETUDSTATUS 209 +#define APCI1710_INCCPT_GETINTERRUPTUDLATCHEDSTATUS 210 +#define APCI1710_INCCPT_READFREQUENCYMEASUREMENT 211 +#define APCI1710_INCCPT_READINTERRUPT 212 + +//INSN BITS +#define APCI1710_INCCPT_CLEARCOUNTERVALUE 300 +#define APCI1710_INCCPT_CLEARALLCOUNTERVALUE 301 +#define APCI1710_INCCPT_SETINPUTFILTER 302 +#define APCI1710_INCCPT_LATCHCOUNTER 303 +#define APCI1710_INCCPT_SETINDEXANDREFERENCESOURCE 304 +#define APCI1710_INCCPT_SETDIGITALCHLON 305 +#define APCI1710_INCCPT_SETDIGITALCHLOFF 306 + +// INSN WRITE +#define APCI1710_INCCPT_ENABLELATCHINTERRUPT 400 +#define APCI1710_INCCPT_DISABLELATCHINTERRUPT 401 +#define APCI1710_INCCPT_WRITE16BITCOUNTERVALUE 402 +#define APCI1710_INCCPT_WRITE32BITCOUNTERVALUE 403 +#define APCI1710_INCCPT_ENABLEINDEX 404 +#define APCI1710_INCCPT_DISABLEINDEX 405 +#define APCI1710_INCCPT_ENABLECOMPARELOGIC 406 +#define APCI1710_INCCPT_DISABLECOMPARELOGIC 407 +#define APCI1710_INCCPT_ENABLEFREQUENCYMEASUREMENT 408 +#define APCI1710_INCCPT_DISABLEFREQUENCYMEASUREMENT 409 + +/************ Main Functions *************/ +INT i_APCI1710_InsnConfigINCCPT(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +INT i_APCI1710_InsnBitsINCCPT(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +INT i_APCI1710_InsnWriteINCCPT(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +INT i_APCI1710_InsnReadINCCPT(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +/*********** Supplementary Functions********/ + +// INSN CONFIG + +INT i_APCI1710_InitCounter(comedi_device * dev, + BYTE b_ModulNbr, + BYTE b_CounterRange, + BYTE b_FirstCounterModus, + BYTE b_FirstCounterOption, + BYTE b_SecondCounterModus, BYTE b_SecondCounterOption); + +INT i_APCI1710_CounterAutoTest(comedi_device * dev, PBYTE pb_TestStatus); + +INT i_APCI1710_InitIndex(comedi_device * dev, + BYTE b_ModulNbr, + BYTE b_ReferenceAction, + BYTE b_IndexOperation, BYTE b_AutoMode, BYTE b_InterruptEnable); + +INT i_APCI1710_InitReference(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_ReferenceLevel); + +INT i_APCI1710_InitExternalStrobe(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_ExternalStrobe, BYTE b_ExternalStrobeLevel); + +INT i_APCI1710_InitCompareLogic(comedi_device * dev, + BYTE b_ModulNbr, UINT ui_CompareValue); + +INT i_APCI1710_InitFrequencyMeasurement(comedi_device * dev, + BYTE b_ModulNbr, + BYTE b_PCIInputClock, + BYTE b_TimingUnity, + ULONG ul_TimingInterval, PULONG pul_RealTimingInterval); + +//INSN BITS + +INT i_APCI1710_ClearCounterValue(comedi_device * dev, BYTE b_ModulNbr); + +INT i_APCI1710_ClearAllCounterValue(comedi_device * dev); + +INT i_APCI1710_SetInputFilter(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_PCIInputClock, BYTE b_Filter); + +INT i_APCI1710_LatchCounter(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_LatchReg); + +INT i_APCI1710_SetIndexAndReferenceSource(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_SourceSelection); + +INT i_APCI1710_SetDigitalChlOn(comedi_device * dev, BYTE b_ModulNbr); + +INT i_APCI1710_SetDigitalChlOff(comedi_device * dev, BYTE b_ModulNbr); + +// INSN WRITE +INT i_APCI1710_EnableLatchInterrupt(comedi_device * dev, BYTE b_ModulNbr); + +INT i_APCI1710_DisableLatchInterrupt(comedi_device * dev, BYTE b_ModulNbr); + +INT i_APCI1710_Write16BitCounterValue(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_SelectedCounter, UINT ui_WriteValue); + +INT i_APCI1710_Write32BitCounterValue(comedi_device * dev, + BYTE b_ModulNbr, ULONG ul_WriteValue); + +INT i_APCI1710_EnableIndex(comedi_device * dev, BYTE b_ModulNbr); + +INT i_APCI1710_DisableIndex(comedi_device * dev, BYTE b_ModulNbr); + +INT i_APCI1710_EnableCompareLogic(comedi_device * dev, BYTE b_ModulNbr); + +INT i_APCI1710_DisableCompareLogic(comedi_device * dev, BYTE b_ModulNbr); + +INT i_APCI1710_EnableFrequencyMeasurement(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_InterruptEnable); + +INT i_APCI1710_DisableFrequencyMeasurement(comedi_device * dev, + BYTE b_ModulNbr); + +// INSN READ + +INT i_APCI1710_ReadLatchRegisterStatus(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_LatchReg, PBYTE pb_LatchStatus); + +INT i_APCI1710_ReadLatchRegisterValue(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_LatchReg, PULONG pul_LatchValue); + +INT i_APCI1710_Read16BitCounterValue(comedi_device * dev, + BYTE b_ModulNbr, BYTE b_SelectedCounter, PUINT pui_CounterValue); + +INT i_APCI1710_Read32BitCounterValue(comedi_device * dev, + BYTE b_ModulNbr, PULONG pul_CounterValue); + +INT i_APCI1710_GetIndexStatus(comedi_device * dev, + BYTE b_ModulNbr, PBYTE pb_IndexStatus); + +INT i_APCI1710_GetReferenceStatus(comedi_device * dev, + BYTE b_ModulNbr, PBYTE pb_ReferenceStatus); + +INT i_APCI1710_GetUASStatus(comedi_device * dev, + BYTE b_ModulNbr, PBYTE pb_UASStatus); + +INT i_APCI1710_GetCBStatus(comedi_device * dev, + BYTE b_ModulNbr, PBYTE pb_CBStatus); + +INT i_APCI1710_Get16BitCBStatus(comedi_device * dev, + BYTE b_ModulNbr, PBYTE pb_CBStatusCounter0, PBYTE pb_CBStatusCounter1); + +INT i_APCI1710_GetUDStatus(comedi_device * dev, + BYTE b_ModulNbr, PBYTE pb_UDStatus); + +INT i_APCI1710_GetInterruptUDLatchedStatus(comedi_device * dev, + BYTE b_ModulNbr, PBYTE pb_UDStatus); + +INT i_APCI1710_ReadFrequencyMeasurement(comedi_device * dev, + BYTE b_ModulNbr, + PBYTE pb_Status, PBYTE pb_UDStatus, PULONG pul_ReadValue); --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.c @@ -0,0 +1,861 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-----------------------------------------------------------------------+ + | Project : API APCI1710 | Compiler : gcc | + | Module name : Inp_CPT.C | Version : 2.96 | + +-------------------------------+---------------------------------------+ + | Project manager: Eric Stolz | Date : 02/12/2002 | + +-----------------------------------------------------------------------+ + | Description : APCI-1710 pulse encoder module | + | | + | | + +-----------------------------------------------------------------------+ + | UPDATES | + +-----------------------------------------------------------------------+ + | Date | Author | Description of updates | + +----------+-----------+------------------------------------------------+ + | | | | + |----------|-----------|------------------------------------------------| + | 08/05/00 | Guinot C | - 0400/0228 All Function in RING 0 | + | | | available | + +-----------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Included files | ++----------------------------------------------------------------------------+ +*/ + +#include "APCI1710_Inp_cpt.h" + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_InitPulseEncoder | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_PulseEncoderNbr, | +| BYTE_ b_InputLevelSelection, | +| BYTE_ b_TriggerOutputAction, | +| ULONG_ ul_StartValue) | ++----------------------------------------------------------------------------+ +| Task : Configure the pulse encoder operating mode selected via| +| b_ModulNbr and b_PulseEncoderNbr. The pulse encoder | +| after each pulse decrement the counter value from 1. | +| | +| You must calling this function be for you call any | +| other function witch access of pulse encoders. | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710| +| BYTE_ b_ModulNbr : Module number to | +| configure (0 to 3) | +| BYTE_ b_PulseEncoderNbr : Pulse encoder selection | +| (0 to 3) | +| BYTE_ b_InputLevelSelection : Input level selection | +| (0 or 1) | +| 0 : Set pulse encoder| +| count the the low| +| level pulse. | +| 1 : Set pulse encoder| +| count the the | +| high level pulse.| +| BYTE_ b_TriggerOutputAction : Digital TRIGGER output | +| action | +| 0 : No action | +| 1 : Set the trigger | +| output to "1" | +| (high) after the | +| passage from 1 to| +| 0 from pulse | +| encoder. | +| 2 : Set the trigger | +| output to "0" | +| (low) after the | +| passage from 1 to| +| 0 from pulse | +| encoder | +| ULONG_ ul_StartValue : Pulse encoder start value| +| (1 to 4294967295) + b_ModulNbr =(BYTE) CR_AREF(insn->chanspec); + b_PulseEncoderNbr =(BYTE) data[0]; + b_InputLevelSelection =(BYTE) data[1]; + b_TriggerOutputAction =(BYTE) data[2]; + ul_StartValue =(ULONG) data[3]; + | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: The module is not a pulse encoder module | +| -3: Pulse encoder selection is wrong | +| -4: Input level selection is wrong | +| -5: Digital TRIGGER output action selection is wrong | +| -6: Pulse encoder start value is wrong | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnConfigInitPulseEncoder(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = 0; + DWORD dw_IntRegister; + + BYTE b_ModulNbr; + BYTE b_PulseEncoderNbr; + BYTE b_InputLevelSelection; + BYTE b_TriggerOutputAction; + ULONG ul_StartValue; + + b_ModulNbr = (BYTE) CR_AREF(insn->chanspec); + b_PulseEncoderNbr = (BYTE) data[0]; + b_InputLevelSelection = (BYTE) data[1]; + b_TriggerOutputAction = (BYTE) data[2]; + ul_StartValue = (ULONG) data[3]; + + i_ReturnValue = insn->n; + + /***********************************/ + /* Test the selected module number */ + /***********************************/ + + if (b_ModulNbr <= 3) { + /*************************/ + /* Test if pulse encoder */ + /*************************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + APCI1710_PULSE_ENCODER) == + APCI1710_PULSE_ENCODER) { + /******************************************/ + /* Test the selected pulse encoder number */ + /******************************************/ + + if (b_PulseEncoderNbr <= 3) { + /************************/ + /* Test the input level */ + /************************/ + + if ((b_InputLevelSelection == 0) + || (b_InputLevelSelection == 1)) { + /*******************************************/ + /* Test the ouput TRIGGER action selection */ + /*******************************************/ + + if ((b_TriggerOutputAction <= 2) + || (b_PulseEncoderNbr > 0)) { + if (ul_StartValue > 1) { + + dw_IntRegister = + inl(devpriv-> + s_BoardInfos. + ui_Address + + 20 + + (64 * b_ModulNbr)); + + /***********************/ + /* Set the start value */ + /***********************/ + + outl(ul_StartValue, + devpriv-> + s_BoardInfos. + ui_Address + + (b_PulseEncoderNbr + * 4) + + (64 * b_ModulNbr)); + + /***********************/ + /* Set the input level */ + /***********************/ + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_SetRegister = + (devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_SetRegister & + (0xFFFFFFFFUL - + (1UL << (8 + b_PulseEncoderNbr)))) | ((1UL & (~b_InputLevelSelection)) << (8 + b_PulseEncoderNbr)); + + /*******************************/ + /* Test if output trigger used */ + /*******************************/ + + if ((b_TriggerOutputAction > 0) && (b_PulseEncoderNbr > 1)) { + /****************************/ + /* Enable the output action */ + /****************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_SetRegister + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_SetRegister + | (1UL + << (4 + b_PulseEncoderNbr)); + + /*********************************/ + /* Set the output TRIGGER action */ + /*********************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_SetRegister + = + (devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_SetRegister + & + (0xFFFFFFFFUL + - + (1UL << (12 + b_PulseEncoderNbr)))) | ((1UL & (b_TriggerOutputAction - 1)) << (12 + b_PulseEncoderNbr)); + } else { + /*****************************/ + /* Disable the output action */ + /*****************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_SetRegister + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_SetRegister + & + (0xFFFFFFFFUL + - + (1UL << (4 + b_PulseEncoderNbr))); + } + + /*************************/ + /* Set the configuration */ + /*************************/ + + outl(devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_SetRegister, + devpriv-> + s_BoardInfos. + ui_Address + + 20 + + (64 * b_ModulNbr)); + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PulseEncoderModuleInfo. + s_PulseEncoderInfo + [b_PulseEncoderNbr]. + b_PulseEncoderInit + = 1; + } else { + /**************************************/ + /* Pulse encoder start value is wrong */ + /**************************************/ + + DPRINTK("Pulse encoder start value is wrong\n"); + i_ReturnValue = -6; + } + } else { + /****************************************************/ + /* Digital TRIGGER output action selection is wrong */ + /****************************************************/ + + DPRINTK("Digital TRIGGER output action selection is wrong\n"); + i_ReturnValue = -5; + } + } else { + /**********************************/ + /* Input level selection is wrong */ + /**********************************/ + + DPRINTK("Input level selection is wrong\n"); + i_ReturnValue = -4; + } + } else { + /************************************/ + /* Pulse encoder selection is wrong */ + /************************************/ + + DPRINTK("Pulse encoder selection is wrong\n"); + i_ReturnValue = -3; + } + } else { + /********************************************/ + /* The module is not a pulse encoder module */ + /********************************************/ + + DPRINTK("The module is not a pulse encoder module\n"); + i_ReturnValue = -2; + } + } else { + /********************************************/ + /* The module is not a pulse encoder module */ + /********************************************/ + + DPRINTK("The module is not a pulse encoder module\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_EnablePulseEncoder | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_PulseEncoderNbr, | +| BYTE_ b_CycleSelection, | +| BYTE_ b_InterruptHandling) | ++----------------------------------------------------------------------------+ +| Task : Enableor disable the selected pulse encoder (b_PulseEncoderNbr) | +| from selected module (b_ModulNbr). Each input pulse | +| decrement the pulse encoder counter value from 1. | +| If you enabled the interrupt (b_InterruptHandling), a | +| interrupt is generated when the pulse encoder has run | +| down. | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710| +| BYTE_ b_ModulNbr : Module number to | +| configure (0 to 3) | +| BYTE_ b_PulseEncoderNbr : Pulse encoder selection | +| (0 to 3) | +| BYTE_ b_CycleSelection : APCI1710_CONTINUOUS: | +| Each time the | +| counting value is set| +| on "0", the pulse | +| encoder load the | +| start value after | +| the next pulse. | +| APCI1710_SINGLE: | +| If the counter is set| +| on "0", the pulse | +| encoder is stopped. | +| BYTE_ b_InterruptHandling : Interrupts can be | +| generated, when the pulse| +| encoder has run down. | +| With this parameter the | +| user decides if | +| interrupts are used or | +| not. | +| APCI1710_ENABLE: | +| Interrupts are enabled | +| APCI1710_DISABLE: | +| Interrupts are disabled + + b_ModulNbr =(BYTE) CR_AREF(insn->chanspec); + b_Action =(BYTE) data[0]; + b_PulseEncoderNbr =(BYTE) data[1]; + b_CycleSelection =(BYTE) data[2]; + b_InterruptHandling =(BYTE) data[3];| ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection is wrong | +| -3: Pulse encoder selection is wrong | +| -4: Pulse encoder not initialised. | +| See function "i_APCI1710_InitPulseEncoder" | +| -5: Cycle selection mode is wrong | +| -6: Interrupt handling mode is wrong | +| -7: Interrupt routine not installed. | +| See function "i_APCI1710_SetBoardIntRoutineX" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnWriteEnableDisablePulseEncoder(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = 0; + BYTE b_ModulNbr; + BYTE b_PulseEncoderNbr; + BYTE b_CycleSelection; + BYTE b_InterruptHandling; + BYTE b_Action; + + i_ReturnValue = insn->n; + b_ModulNbr = (BYTE) CR_AREF(insn->chanspec); + b_Action = (BYTE) data[0]; + b_PulseEncoderNbr = (BYTE) data[1]; + b_CycleSelection = (BYTE) data[2]; + b_InterruptHandling = (BYTE) data[3]; + + /***********************************/ + /* Test the selected module number */ + /***********************************/ + + if (b_ModulNbr <= 3) { + /******************************************/ + /* Test the selected pulse encoder number */ + /******************************************/ + + if (b_PulseEncoderNbr <= 3) { + /*************************************/ + /* Test if pulse encoder initialised */ + /*************************************/ + + if (devpriv->s_ModuleInfo[b_ModulNbr]. + s_PulseEncoderModuleInfo. + s_PulseEncoderInfo[b_PulseEncoderNbr]. + b_PulseEncoderInit == 1) { + switch (b_Action) { + + case APCI1710_ENABLE: + /****************************/ + /* Test the cycle selection */ + /****************************/ + + if (b_CycleSelection == + APCI1710_CONTINUOUS + || b_CycleSelection == + APCI1710_SINGLE) { + /*******************************/ + /* Test the interrupt handling */ + /*******************************/ + + if (b_InterruptHandling == + APCI1710_ENABLE + || b_InterruptHandling + == APCI1710_DISABLE) { + /******************************/ + /* Test if interrupt not used */ + /******************************/ + + if (b_InterruptHandling + == + APCI1710_DISABLE) + { + /*************************/ + /* Disable the interrupt */ + /*************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_SetRegister + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_SetRegister + & + (0xFFFFFFFFUL + - + (1UL << b_PulseEncoderNbr)); + } else { + + /************************/ + /* Enable the interrupt */ + /************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_SetRegister + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_SetRegister + | (1UL + << + b_PulseEncoderNbr); + devpriv->tsk_Current = current; // Save the current process task structure + + } + + if (i_ReturnValue >= 0) { + /***********************************/ + /* Enable or disable the interrupt */ + /***********************************/ + + outl(devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_SetRegister, + devpriv-> + s_BoardInfos. + ui_Address + + 20 + + (64 * b_ModulNbr)); + + /****************************/ + /* Enable the pulse encoder */ + /****************************/ + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_ControlRegister + = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_ControlRegister + | (1UL + << + b_PulseEncoderNbr); + + /**********************/ + /* Set the cycle mode */ + /**********************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_ControlRegister + = + (devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_ControlRegister + & + (0xFFFFFFFFUL + - + (1 << (b_PulseEncoderNbr + 4)))) | ((b_CycleSelection & 1UL) << (4 + b_PulseEncoderNbr)); + + /****************************/ + /* Enable the pulse encoder */ + /****************************/ + + outl(devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_ControlRegister, + devpriv-> + s_BoardInfos. + ui_Address + + 16 + + (64 * b_ModulNbr)); + } + } else { + /************************************/ + /* Interrupt handling mode is wrong */ + /************************************/ + + DPRINTK("Interrupt handling mode is wrong\n"); + i_ReturnValue = -6; + } + } else { + /*********************************/ + /* Cycle selection mode is wrong */ + /*********************************/ + + DPRINTK("Cycle selection mode is wrong\n"); + i_ReturnValue = -5; + } + break; + + case APCI1710_DISABLE: + devpriv->s_ModuleInfo[b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_ControlRegister = + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_ControlRegister & + (0xFFFFFFFFUL - + (1UL << b_PulseEncoderNbr)); + + /*****************************/ + /* Disable the pulse encoder */ + /*****************************/ + + outl(devpriv->s_ModuleInfo[b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_ControlRegister, + devpriv->s_BoardInfos. + ui_Address + 16 + + (64 * b_ModulNbr)); + + break; + } // switch End + + } else { + /*********************************/ + /* Pulse encoder not initialised */ + /*********************************/ + + DPRINTK("Pulse encoder not initialised\n"); + i_ReturnValue = -4; + } + } else { + /************************************/ + /* Pulse encoder selection is wrong */ + /************************************/ + + DPRINTK("Pulse encoder selection is wrong\n"); + i_ReturnValue = -3; + } + } else { + /*****************************/ + /* Module selection is wrong */ + /*****************************/ + + DPRINTK("Module selection is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_ReadPulseEncoderStatus | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_PulseEncoderNbr, | +| PBYTE_ pb_Status) | ++----------------------------------------------------------------------------+ +| Task APCI1710_PULSEENCODER_READ : Reads the pulse encoder status + and valuefrom selected pulse | +| encoder (b_PulseEncoderNbr) from selected module | +| (b_ModulNbr). | ++----------------------------------------------------------------------------+ + BYTE b_Type; data[0] + APCI1710_PULSEENCODER_WRITE + Writes a 32-bit value (ul_WriteValue) into the selected| +| pulse encoder (b_PulseEncoderNbr) from selected module | +| (b_ModulNbr). This operation set the new start pulse | +| encoder value. + APCI1710_PULSEENCODER_READ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710| +| CRAREF() BYTE_ b_ModulNbr : Module number to | +| configure (0 to 3) | +| data[1] BYTE_ b_PulseEncoderNbr : Pulse encoder selection | +| (0 to 3) + APCI1710_PULSEENCODER_WRITE + data[2] ULONG_ ul_WriteValue : 32-bit value to be | +| written | ++----------------------------------------------------------------------------+ +| Output Parameters : PBYTE_ pb_Status : Pulse encoder status. | +| 0 : No overflow occur| +| 1 : Overflow occur + PULONG_ pul_ReadValue : Pulse encoder value | | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection is wrong | +| -3: Pulse encoder selection is wrong | +| -4: Pulse encoder not initialised. | +| See function "i_APCI1710_InitPulseEncoder" | ++----------------------------------------------------------------------------+ +*/ + +/*_INT_ i_APCI1710_ReadPulseEncoderStatus (BYTE_ b_BoardHandle, + BYTE_ b_ModulNbr, + BYTE_ b_PulseEncoderNbr, + + PBYTE_ pb_Status) + */ +INT i_APCI1710_InsnBitsReadWritePulseEncoder(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = 0; + DWORD dw_StatusRegister; + BYTE b_ModulNbr; + BYTE b_PulseEncoderNbr; + PBYTE pb_Status; + BYTE b_Type; + PULONG pul_ReadValue; + ULONG ul_WriteValue; + + i_ReturnValue = insn->n; + b_ModulNbr = (BYTE) CR_AREF(insn->chanspec); + b_Type = (BYTE) data[0]; + b_PulseEncoderNbr = (BYTE) data[1]; + pb_Status = (PBYTE) & data[0]; + pul_ReadValue = (PULONG) & data[1]; + + /***********************************/ + /* Test the selected module number */ + /***********************************/ + + if (b_ModulNbr <= 3) { + /******************************************/ + /* Test the selected pulse encoder number */ + /******************************************/ + + if (b_PulseEncoderNbr <= 3) { + /*************************************/ + /* Test if pulse encoder initialised */ + /*************************************/ + + if (devpriv->s_ModuleInfo[b_ModulNbr]. + s_PulseEncoderModuleInfo. + s_PulseEncoderInfo[b_PulseEncoderNbr]. + b_PulseEncoderInit == 1) { + + switch (b_Type) { + case APCI1710_PULSEENCODER_READ: + /****************************/ + /* Read the status register */ + /****************************/ + + dw_StatusRegister = + inl(devpriv->s_BoardInfos. + ui_Address + 16 + + (64 * b_ModulNbr)); + + devpriv->s_ModuleInfo[b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_StatusRegister = devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_StatusRegister | + dw_StatusRegister; + + *pb_Status = + (BYTE) (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_StatusRegister >> (1 + + b_PulseEncoderNbr)) & 1; + + devpriv->s_ModuleInfo[b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_StatusRegister = + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_PulseEncoderModuleInfo. + dw_StatusRegister & + (0xFFFFFFFFUL - (1 << (1 + + b_PulseEncoderNbr))); + + /******************/ + /* Read the value */ + /******************/ + + *pul_ReadValue = + inl(devpriv->s_BoardInfos. + ui_Address + + (4 * b_PulseEncoderNbr) + + (64 * b_ModulNbr)); + break; + + case APCI1710_PULSEENCODER_WRITE: + ul_WriteValue = (ULONG) data[2]; + /*******************/ + /* Write the value */ + /*******************/ + + outl(ul_WriteValue, + devpriv->s_BoardInfos. + ui_Address + + (4 * b_PulseEncoderNbr) + + (64 * b_ModulNbr)); + + } //end of switch + } else { + /*********************************/ + /* Pulse encoder not initialised */ + /*********************************/ + + DPRINTK("Pulse encoder not initialised\n"); + i_ReturnValue = -4; + } + } else { + /************************************/ + /* Pulse encoder selection is wrong */ + /************************************/ + + DPRINTK("Pulse encoder selection is wrong\n"); + i_ReturnValue = -3; + } + } else { + /*****************************/ + /* Module selection is wrong */ + /*****************************/ + + DPRINTK("Module selection is wrong\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +INT i_APCI1710_InsnReadInterruptPulseEncoder(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + + data[0] = devpriv->s_InterruptParameters. + s_FIFOInterruptParameters[devpriv-> + s_InterruptParameters.ui_Read].b_OldModuleMask; + data[1] = devpriv->s_InterruptParameters. + s_FIFOInterruptParameters[devpriv-> + s_InterruptParameters.ui_Read].ul_OldInterruptMask; + data[2] = devpriv->s_InterruptParameters. + s_FIFOInterruptParameters[devpriv-> + s_InterruptParameters.ui_Read].ul_OldCounterLatchValue; + + /***************************/ + /* Increment the read FIFO */ + /***************************/ + + devpriv->s_InterruptParameters. + ui_Read = (devpriv-> + s_InterruptParameters.ui_Read + 1) % APCI1710_SAVE_INTERRUPT; + + return insn->n; + +} --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Inp_cpt.h @@ -0,0 +1,52 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ + +#define APCI1710_SINGLE 0 +#define APCI1710_CONTINUOUS 1 + +#define APCI1710_PULSEENCODER_READ 0 +#define APCI1710_PULSEENCODER_WRITE 1 + +INT i_APCI1710_InsnConfigInitPulseEncoder(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + +INT i_APCI1710_InsnWriteEnableDisablePulseEncoder(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); +/* ++----------------------------------------------------------------------------+ +| READ PULSE ENCODER FUNCTIONS | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnReadInterruptPulseEncoder(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + +/* ++----------------------------------------------------------------------------+ +| WRITE PULSE ENCODER FUNCTIONS | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnBitsReadWritePulseEncoder(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.c @@ -0,0 +1,3588 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-----------------------------------------------------------------------+ + | Project : API APCI1710 | Compiler : gcc | + | Module name : PWM.C | Version : 2.96 | + +-------------------------------+---------------------------------------+ + | Project manager: Eric Stolz | Date : 02/12/2002 | + +-----------------------------------------------------------------------+ + | Description : APCI-1710 Wulse wide modulation module | + | | + | | + +-----------------------------------------------------------------------+ + | UPDATES | + +-----------------------------------------------------------------------+ + | Date | Author | Description of updates | + +-----------------------------------------------------------------------+ + | 08/05/00 | Guinot C | - 0400/0228 All Function in RING 0 | + | | | available | + +-----------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Included files | ++----------------------------------------------------------------------------+ +*/ + +#include "APCI1710_Pwm.h" + +/* ++----------------------------------------------------------------------------+ +| Function Name :INT i_APCI1710_InsnConfigPWM(comedi_device *dev, +comedi_subdevice *s,comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Pwm Init and Get Pwm Initialisation | ++----------------------------------------------------------------------------+ +| Input Parameters : ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnConfigPWM(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + BYTE b_ConfigType; + INT i_ReturnValue = 0; + b_ConfigType = CR_CHAN(insn->chanspec); + + switch (b_ConfigType) { + case APCI1710_PWM_INIT: + i_ReturnValue = i_APCI1710_InitPWM(dev, (BYTE) CR_AREF(insn->chanspec), // b_ModulNbr + (BYTE) data[0], //b_PWM + (BYTE) data[1], // b_ClockSelection + (BYTE) data[2], // b_TimingUnit + (ULONG) data[3], //ul_LowTiming + (ULONG) data[4], //ul_HighTiming + (PULONG) & data[0], //pul_RealLowTiming + (PULONG) & data[1] //pul_RealHighTiming + ); + break; + + case APCI1710_PWM_GETINITDATA: + i_ReturnValue = i_APCI1710_GetPWMInitialisation(dev, (BYTE) CR_AREF(insn->chanspec), // b_ModulNbr + (BYTE) data[0], //b_PWM + (PBYTE) & data[0], //pb_TimingUnit + (PULONG) & data[1], //pul_LowTiming + (PULONG) & data[2], //pul_HighTiming + (PBYTE) & data[3], // pb_StartLevel + (PBYTE) & data[4], // pb_StopMode + (PBYTE) & data[5], // pb_StopLevel + (PBYTE) & data[6], // pb_ExternGate + (PBYTE) & data[7], // pb_InterruptEnable + (PBYTE) & data[8] // pb_Enable + ); + break; + + default: + printk(" Config Parameter Wrong\n"); + } + + if (i_ReturnValue >= 0) + i_ReturnValue = insn->n; + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_InitPWM | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_PWM, | +| BYTE_ b_ClockSelection, | +| BYTE_ b_TimingUnit, | +| ULONG_ ul_LowTiming, | +| ULONG_ ul_HighTiming, | +| PULONG_ pul_RealLowTiming, | +| PULONG_ pul_RealHighTiming) | ++----------------------------------------------------------------------------+ +| Task : Configure the selected PWM (b_PWM) from selected module| +| (b_ModulNbr). The ul_LowTiming, ul_HighTiming and | +| ul_TimingUnit determine the low/high timing base for | +| the period. pul_RealLowTiming, pul_RealHighTiming | +| return the real timing value. | +| You must calling this function be for you call any | +| other function witch access of the PWM. | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure| +| (0 to 3) | +| BYTE_ b_PWM : Selected PWM (0 or 1). | +| BYTE_ b_ClockSelection : Selection from PCI bus | +| clock | +| - APCI1710_30MHZ : | +| The PC have a 30 MHz | +| PCI bus clock | +| - APCI1710_33MHZ : | +| The PC have a 33 MHz | +| PCI bus clock | +| - APCI1710_40MHZ | +| The APCI-1710 have a | +| integrated 40Mhz | +| quartz. | +| BYTE_ b_TimingUnit : Base timing Unit (0 to 4) | +| 0 : ns | +| 1 : æs | +| 2 : ms | +| 3 : s | +| 4 : mn | +| ULONG_ ul_LowTiming : Low base timing value. | +| ULONG_ ul_HighTiming : High base timing value. | ++----------------------------------------------------------------------------+ +| Output Parameters : PULONG_ pul_RealLowTiming : Real low base timing | +| value. | +| PULONG_ pul_RealHighTiming : Real high base timing | +| value. | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection wrong | +| -3: The module is not a PWM module | +| -4: PWM selection is wrong | +| -5: The selected input clock is wrong | +| -6: Timing Unit selection is wrong | +| -7: Low base timing selection is wrong | +| -8: High base timing selection is wrong | +| -9: You can not used the 40MHz clock selection with | +| this board | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InitPWM(comedi_device * dev, + BYTE b_ModulNbr, + BYTE b_PWM, + BYTE b_ClockSelection, + BYTE b_TimingUnit, + ULONG ul_LowTiming, + ULONG ul_HighTiming, + PULONG pul_RealLowTiming, PULONG pul_RealHighTiming) +{ + INT i_ReturnValue = 0; + ULONG ul_LowTimerValue = 0; + ULONG ul_HighTimerValue = 0; + DWORD dw_Command; + double d_RealLowTiming = 0; + double d_RealHighTiming = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /***************/ + /* Test if PWM */ + /***************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_PWM) { + /**************************/ + /* Test the PWM selection */ + /**************************/ + + if (b_PWM <= 1) { + /******************/ + /* Test the clock */ + /******************/ + + if ((b_ClockSelection == APCI1710_30MHZ) || + (b_ClockSelection == APCI1710_33MHZ) || + (b_ClockSelection == APCI1710_40MHZ)) { + /************************/ + /* Test the timing unit */ + /************************/ + + if (b_TimingUnit <= 4) { + /*********************************/ + /* Test the low timing selection */ + /*********************************/ + + if (((b_ClockSelection == + APCI1710_30MHZ) + && (b_TimingUnit + == 0) + && (ul_LowTiming + >= 266) + && (ul_LowTiming + <= + 0xFFFFFFFFUL)) + || ((b_ClockSelection == + APCI1710_30MHZ) + && (b_TimingUnit + == 1) + && (ul_LowTiming + >= 1) + && (ul_LowTiming + <= + 571230650UL)) + || ((b_ClockSelection == + APCI1710_30MHZ) + && (b_TimingUnit + == 2) + && (ul_LowTiming + >= 1) + && (ul_LowTiming + <= + 571230UL)) + || ((b_ClockSelection == + APCI1710_30MHZ) + && (b_TimingUnit + == 3) + && (ul_LowTiming + >= 1) + && (ul_LowTiming + <= + 571UL)) + || ((b_ClockSelection == + APCI1710_30MHZ) + && (b_TimingUnit + == 4) + && (ul_LowTiming + >= 1) + && (ul_LowTiming + <= 9UL)) + || ((b_ClockSelection == + APCI1710_33MHZ) + && (b_TimingUnit + == 0) + && (ul_LowTiming + >= 242) + && (ul_LowTiming + <= + 0xFFFFFFFFUL)) + || ((b_ClockSelection == + APCI1710_33MHZ) + && (b_TimingUnit + == 1) + && (ul_LowTiming + >= 1) + && (ul_LowTiming + <= + 519691043UL)) + || ((b_ClockSelection == + APCI1710_33MHZ) + && (b_TimingUnit + == 2) + && (ul_LowTiming + >= 1) + && (ul_LowTiming + <= + 519691UL)) + || ((b_ClockSelection == + APCI1710_33MHZ) + && (b_TimingUnit + == 3) + && (ul_LowTiming + >= 1) + && (ul_LowTiming + <= + 520UL)) + || ((b_ClockSelection == + APCI1710_33MHZ) + && (b_TimingUnit + == 4) + && (ul_LowTiming + >= 1) + && (ul_LowTiming + <= 8UL)) + || ((b_ClockSelection == + APCI1710_40MHZ) + && (b_TimingUnit + == 0) + && (ul_LowTiming + >= 200) + && (ul_LowTiming + <= + 0xFFFFFFFFUL)) + || ((b_ClockSelection == + APCI1710_40MHZ) + && (b_TimingUnit + == 1) + && (ul_LowTiming + >= 1) + && (ul_LowTiming + <= + 429496729UL)) + || ((b_ClockSelection == + APCI1710_40MHZ) + && (b_TimingUnit + == 2) + && (ul_LowTiming + >= 1) + && (ul_LowTiming + <= + 429496UL)) + || ((b_ClockSelection == + APCI1710_40MHZ) + && (b_TimingUnit + == 3) + && (ul_LowTiming + >= 1) + && (ul_LowTiming + <= + 429UL)) + || ((b_ClockSelection == + APCI1710_40MHZ) + && (b_TimingUnit + == 4) + && (ul_LowTiming + >= 1) + && (ul_LowTiming + <= + 7UL))) { + /**********************************/ + /* Test the High timing selection */ + /**********************************/ + + if (((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 0) && (ul_HighTiming >= 266) && (ul_HighTiming <= 0xFFFFFFFFUL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 1) && (ul_HighTiming >= 1) && (ul_HighTiming <= 571230650UL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 2) && (ul_HighTiming >= 1) && (ul_HighTiming <= 571230UL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 3) && (ul_HighTiming >= 1) && (ul_HighTiming <= 571UL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 4) && (ul_HighTiming >= 1) && (ul_HighTiming <= 9UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 0) && (ul_HighTiming >= 242) && (ul_HighTiming <= 0xFFFFFFFFUL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 1) && (ul_HighTiming >= 1) && (ul_HighTiming <= 519691043UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 2) && (ul_HighTiming >= 1) && (ul_HighTiming <= 519691UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 3) && (ul_HighTiming >= 1) && (ul_HighTiming <= 520UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 4) && (ul_HighTiming >= 1) && (ul_HighTiming <= 8UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 0) && (ul_HighTiming >= 200) && (ul_HighTiming <= 0xFFFFFFFFUL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 1) && (ul_HighTiming >= 1) && (ul_HighTiming <= 429496729UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 2) && (ul_HighTiming >= 1) && (ul_HighTiming <= 429496UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 3) && (ul_HighTiming >= 1) && (ul_HighTiming <= 429UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 4) && (ul_HighTiming >= 1) && (ul_HighTiming <= 7UL))) { + /**************************/ + /* Test the board version */ + /**************************/ + + if (((b_ClockSelection == APCI1710_40MHZ) && (devpriv->s_BoardInfos.b_BoardVersion > 0)) || (b_ClockSelection != APCI1710_40MHZ)) { + + /************************************/ + /* Calculate the low division fator */ + /************************************/ + + fpu_begin + (); + + switch (b_TimingUnit) { + /******/ + /* ns */ + /******/ + + case 0: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_LowTimerValue + = + (ULONG) + (ul_LowTiming + * + (0.00025 * b_ClockSelection)); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_LowTiming * (0.00025 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) { + ul_LowTimerValue + = + ul_LowTimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + *pul_RealLowTiming + = + (ULONG) + (ul_LowTimerValue + / + (0.00025 * (double)b_ClockSelection)); + d_RealLowTiming + = + (double) + ul_LowTimerValue + / + (0.00025 + * + (double) + b_ClockSelection); + + if ((double)((double)ul_LowTimerValue / (0.00025 * (double)b_ClockSelection)) >= (double)((double)*pul_RealLowTiming + 0.5)) { + *pul_RealLowTiming + = + *pul_RealLowTiming + + + 1; + } + + ul_LowTiming + = + ul_LowTiming + - + 1; + ul_LowTimerValue + = + ul_LowTimerValue + - + 2; + + if (b_ClockSelection != APCI1710_40MHZ) { + ul_LowTimerValue + = + (ULONG) + ( + (double) + (ul_LowTimerValue) + * + 1.007752288); + } + + break; + + /******/ + /* æs */ + /******/ + + case 1: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_LowTimerValue + = + (ULONG) + (ul_LowTiming + * + (0.25 * b_ClockSelection)); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_LowTiming * (0.25 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) { + ul_LowTimerValue + = + ul_LowTimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + *pul_RealLowTiming + = + (ULONG) + (ul_LowTimerValue + / + (0.25 * (double)b_ClockSelection)); + d_RealLowTiming + = + (double) + ul_LowTimerValue + / + ( + (double) + 0.25 + * + (double) + b_ClockSelection); + + if ((double)((double)ul_LowTimerValue / (0.25 * (double)b_ClockSelection)) >= (double)((double)*pul_RealLowTiming + 0.5)) { + *pul_RealLowTiming + = + *pul_RealLowTiming + + + 1; + } + + ul_LowTiming + = + ul_LowTiming + - + 1; + ul_LowTimerValue + = + ul_LowTimerValue + - + 2; + + if (b_ClockSelection != APCI1710_40MHZ) { + ul_LowTimerValue + = + (ULONG) + ( + (double) + (ul_LowTimerValue) + * + 1.007752288); + } + + break; + + /******/ + /* ms */ + /******/ + + case 2: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_LowTimerValue + = + ul_LowTiming + * + (250.0 + * + b_ClockSelection); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_LowTiming * (250.0 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) { + ul_LowTimerValue + = + ul_LowTimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + *pul_RealLowTiming + = + (ULONG) + (ul_LowTimerValue + / + (250.0 * (double)b_ClockSelection)); + d_RealLowTiming + = + (double) + ul_LowTimerValue + / + (250.0 + * + (double) + b_ClockSelection); + + if ((double)((double)ul_LowTimerValue / (250.0 * (double)b_ClockSelection)) >= (double)((double)*pul_RealLowTiming + 0.5)) { + *pul_RealLowTiming + = + *pul_RealLowTiming + + + 1; + } + + ul_LowTiming + = + ul_LowTiming + - + 1; + ul_LowTimerValue + = + ul_LowTimerValue + - + 2; + + if (b_ClockSelection != APCI1710_40MHZ) { + ul_LowTimerValue + = + (ULONG) + ( + (double) + (ul_LowTimerValue) + * + 1.007752288); + } + + break; + + /*****/ + /* s */ + /*****/ + + case 3: + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_LowTimerValue + = + (ULONG) + (ul_LowTiming + * + (250000.0 + * + b_ClockSelection)); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_LowTiming * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) { + ul_LowTimerValue + = + ul_LowTimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + *pul_RealLowTiming + = + (ULONG) + (ul_LowTimerValue + / + (250000.0 + * + (double) + b_ClockSelection)); + d_RealLowTiming + = + (double) + ul_LowTimerValue + / + (250000.0 + * + (double) + b_ClockSelection); + + if ((double)((double)ul_LowTimerValue / (250000.0 * (double)b_ClockSelection)) >= (double)((double)*pul_RealLowTiming + 0.5)) { + *pul_RealLowTiming + = + *pul_RealLowTiming + + + 1; + } + + ul_LowTiming + = + ul_LowTiming + - + 1; + ul_LowTimerValue + = + ul_LowTimerValue + - + 2; + + if (b_ClockSelection != APCI1710_40MHZ) { + ul_LowTimerValue + = + (ULONG) + ( + (double) + (ul_LowTimerValue) + * + 1.007752288); + } + + break; + + /******/ + /* mn */ + /******/ + + case 4: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_LowTimerValue + = + (ULONG) + ( + (ul_LowTiming + * + 60) + * + (250000.0 + * + b_ClockSelection)); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)(ul_LowTiming * 60.0) * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) { + ul_LowTimerValue + = + ul_LowTimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + *pul_RealLowTiming + = + (ULONG) + (ul_LowTimerValue + / + (250000.0 + * + (double) + b_ClockSelection)) + / + 60; + d_RealLowTiming + = + ( + (double) + ul_LowTimerValue + / + (250000.0 + * + (double) + b_ClockSelection)) + / + 60.0; + + if ((double)(((double)ul_LowTimerValue / (250000.0 * (double)b_ClockSelection)) / 60.0) >= (double)((double)*pul_RealLowTiming + 0.5)) { + *pul_RealLowTiming + = + *pul_RealLowTiming + + + 1; + } + + ul_LowTiming + = + ul_LowTiming + - + 1; + ul_LowTimerValue + = + ul_LowTimerValue + - + 2; + + if (b_ClockSelection != APCI1710_40MHZ) { + ul_LowTimerValue + = + (ULONG) + ( + (double) + (ul_LowTimerValue) + * + 1.007752288); + } + + break; + } + + /*************************************/ + /* Calculate the high division fator */ + /*************************************/ + + switch (b_TimingUnit) { + /******/ + /* ns */ + /******/ + + case 0: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_HighTimerValue + = + (ULONG) + (ul_HighTiming + * + (0.00025 * b_ClockSelection)); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_HighTiming * (0.00025 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) { + ul_HighTimerValue + = + ul_HighTimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + *pul_RealHighTiming + = + (ULONG) + (ul_HighTimerValue + / + (0.00025 * (double)b_ClockSelection)); + d_RealHighTiming + = + (double) + ul_HighTimerValue + / + (0.00025 + * + (double) + b_ClockSelection); + + if ((double)((double)ul_HighTimerValue / (0.00025 * (double)b_ClockSelection)) >= (double)((double)*pul_RealHighTiming + 0.5)) { + *pul_RealHighTiming + = + *pul_RealHighTiming + + + 1; + } + + ul_HighTiming + = + ul_HighTiming + - + 1; + ul_HighTimerValue + = + ul_HighTimerValue + - + 2; + + if (b_ClockSelection != APCI1710_40MHZ) { + ul_HighTimerValue + = + (ULONG) + ( + (double) + (ul_HighTimerValue) + * + 1.007752288); + } + + break; + + /******/ + /* æs */ + /******/ + + case 1: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_HighTimerValue + = + (ULONG) + (ul_HighTiming + * + (0.25 * b_ClockSelection)); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_HighTiming * (0.25 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) { + ul_HighTimerValue + = + ul_HighTimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + *pul_RealHighTiming + = + (ULONG) + (ul_HighTimerValue + / + (0.25 * (double)b_ClockSelection)); + d_RealHighTiming + = + (double) + ul_HighTimerValue + / + ( + (double) + 0.25 + * + (double) + b_ClockSelection); + + if ((double)((double)ul_HighTimerValue / (0.25 * (double)b_ClockSelection)) >= (double)((double)*pul_RealHighTiming + 0.5)) { + *pul_RealHighTiming + = + *pul_RealHighTiming + + + 1; + } + + ul_HighTiming + = + ul_HighTiming + - + 1; + ul_HighTimerValue + = + ul_HighTimerValue + - + 2; + + if (b_ClockSelection != APCI1710_40MHZ) { + ul_HighTimerValue + = + (ULONG) + ( + (double) + (ul_HighTimerValue) + * + 1.007752288); + } + + break; + + /******/ + /* ms */ + /******/ + + case 2: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_HighTimerValue + = + ul_HighTiming + * + (250.0 + * + b_ClockSelection); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_HighTiming * (250.0 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) { + ul_HighTimerValue + = + ul_HighTimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + *pul_RealHighTiming + = + (ULONG) + (ul_HighTimerValue + / + (250.0 * (double)b_ClockSelection)); + d_RealHighTiming + = + (double) + ul_HighTimerValue + / + (250.0 + * + (double) + b_ClockSelection); + + if ((double)((double)ul_HighTimerValue / (250.0 * (double)b_ClockSelection)) >= (double)((double)*pul_RealHighTiming + 0.5)) { + *pul_RealHighTiming + = + *pul_RealHighTiming + + + 1; + } + + ul_HighTiming + = + ul_HighTiming + - + 1; + ul_HighTimerValue + = + ul_HighTimerValue + - + 2; + + if (b_ClockSelection != APCI1710_40MHZ) { + ul_HighTimerValue + = + (ULONG) + ( + (double) + (ul_HighTimerValue) + * + 1.007752288); + } + + break; + + /*****/ + /* s */ + /*****/ + + case 3: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_HighTimerValue + = + (ULONG) + (ul_HighTiming + * + (250000.0 + * + b_ClockSelection)); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_HighTiming * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) { + ul_HighTimerValue + = + ul_HighTimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + *pul_RealHighTiming + = + (ULONG) + (ul_HighTimerValue + / + (250000.0 + * + (double) + b_ClockSelection)); + d_RealHighTiming + = + (double) + ul_HighTimerValue + / + (250000.0 + * + (double) + b_ClockSelection); + + if ((double)((double)ul_HighTimerValue / (250000.0 * (double)b_ClockSelection)) >= (double)((double)*pul_RealHighTiming + 0.5)) { + *pul_RealHighTiming + = + *pul_RealHighTiming + + + 1; + } + + ul_HighTiming + = + ul_HighTiming + - + 1; + ul_HighTimerValue + = + ul_HighTimerValue + - + 2; + + if (b_ClockSelection != APCI1710_40MHZ) { + ul_HighTimerValue + = + (ULONG) + ( + (double) + (ul_HighTimerValue) + * + 1.007752288); + } + + break; + + /******/ + /* mn */ + /******/ + + case 4: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_HighTimerValue + = + (ULONG) + ( + (ul_HighTiming + * + 60) + * + (250000.0 + * + b_ClockSelection)); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)(ul_HighTiming * 60.0) * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) { + ul_HighTimerValue + = + ul_HighTimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + *pul_RealHighTiming + = + (ULONG) + (ul_HighTimerValue + / + (250000.0 + * + (double) + b_ClockSelection)) + / + 60; + d_RealHighTiming + = + ( + (double) + ul_HighTimerValue + / + (250000.0 + * + (double) + b_ClockSelection)) + / + 60.0; + + if ((double)(((double)ul_HighTimerValue / (250000.0 * (double)b_ClockSelection)) / 60.0) >= (double)((double)*pul_RealHighTiming + 0.5)) { + *pul_RealHighTiming + = + *pul_RealHighTiming + + + 1; + } + + ul_HighTiming + = + ul_HighTiming + - + 1; + ul_HighTimerValue + = + ul_HighTimerValue + - + 2; + + if (b_ClockSelection != APCI1710_40MHZ) { + ul_HighTimerValue + = + (ULONG) + ( + (double) + (ul_HighTimerValue) + * + 1.007752288); + } + + break; + } + + fpu_end(); + /****************************/ + /* Save the clock selection */ + /****************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PWMModuleInfo. + b_ClockSelection + = + b_ClockSelection; + + /************************/ + /* Save the timing unit */ + /************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PWMModuleInfo. + s_PWMInfo + [b_PWM]. + b_TimingUnit + = + b_TimingUnit; + + /****************************/ + /* Save the low base timing */ + /****************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PWMModuleInfo. + s_PWMInfo + [b_PWM]. + d_LowTiming + = + d_RealLowTiming; + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PWMModuleInfo. + s_PWMInfo + [b_PWM]. + ul_RealLowTiming + = + *pul_RealLowTiming; + + /****************************/ + /* Save the high base timing */ + /****************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PWMModuleInfo. + s_PWMInfo + [b_PWM]. + d_HighTiming + = + d_RealHighTiming; + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PWMModuleInfo. + s_PWMInfo + [b_PWM]. + ul_RealHighTiming + = + *pul_RealHighTiming; + + /************************/ + /* Write the low timing */ + /************************/ + + outl(ul_LowTimerValue, devpriv->s_BoardInfos.ui_Address + 0 + (20 * b_PWM) + (64 * b_ModulNbr)); + + /*************************/ + /* Write the high timing */ + /*************************/ + + outl(ul_HighTimerValue, devpriv->s_BoardInfos.ui_Address + 4 + (20 * b_PWM) + (64 * b_ModulNbr)); + + /***************************/ + /* Set the clock selection */ + /***************************/ + + dw_Command + = + inl + (devpriv-> + s_BoardInfos. + ui_Address + + + 8 + + + (20 * b_PWM) + (64 * b_ModulNbr)); + + dw_Command + = + dw_Command + & + 0x7F; + + if (b_ClockSelection == APCI1710_40MHZ) { + dw_Command + = + dw_Command + | + 0x80; + } + + /***************************/ + /* Set the clock selection */ + /***************************/ + + outl(dw_Command, devpriv->s_BoardInfos.ui_Address + 8 + (20 * b_PWM) + (64 * b_ModulNbr)); + + /*************/ + /* PWM init. */ + /*************/ + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PWMModuleInfo. + s_PWMInfo + [b_PWM]. + b_PWMInit + = + 1; + } else { + /***************************************************/ + /* You can not used the 40MHz clock selection with */ + /* this board */ + /***************************************************/ + DPRINTK("You can not used the 40MHz clock selection with this board\n"); + i_ReturnValue + = + -9; + } + } else { + /***************************************/ + /* High base timing selection is wrong */ + /***************************************/ + DPRINTK("High base timing selection is wrong\n"); + i_ReturnValue = + -8; + } + } else { + /**************************************/ + /* Low base timing selection is wrong */ + /**************************************/ + DPRINTK("Low base timing selection is wrong\n"); + i_ReturnValue = -7; + } + } // if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) + else { + /**********************************/ + /* Timing unit selection is wrong */ + /**********************************/ + DPRINTK("Timing unit selection is wrong\n"); + i_ReturnValue = -6; + } // if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) + } // if ((b_ClockSelection == APCI1710_30MHZ) || (b_ClockSelection == APCI1710_33MHZ) || (b_ClockSelection == APCI1710_40MHZ)) + else { + /*******************************/ + /* The selected clock is wrong */ + /*******************************/ + DPRINTK("The selected clock is wrong\n"); + i_ReturnValue = -5; + } // if ((b_ClockSelection == APCI1710_30MHZ) || (b_ClockSelection == APCI1710_33MHZ) || (b_ClockSelection == APCI1710_40MHZ)) + } // if (b_PWM >= 0 && b_PWM <= 1) + else { + /******************************/ + /* Tor PWM selection is wrong */ + /******************************/ + DPRINTK("Tor PWM selection is wrong\n"); + i_ReturnValue = -4; + } // if (b_PWM >= 0 && b_PWM <= 1) + } else { + /**********************************/ + /* The module is not a PWM module */ + /**********************************/ + DPRINTK("The module is not a PWM module\n"); + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_GetPWMInitialisation | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_PWM, | +| PBYTE_ pb_TimingUnit, | +| PULONG_ pul_LowTiming, | +| PULONG_ pul_HighTiming, | +| PBYTE_ pb_StartLevel, | +| PBYTE_ pb_StopMode, | +| PBYTE_ pb_StopLevel, | +| PBYTE_ pb_ExternGate, | +| PBYTE_ pb_InterruptEnable, | +| PBYTE_ pb_Enable) | ++----------------------------------------------------------------------------+ +| Task : Return the PWM (b_PWM) initialisation from selected | +| module (b_ModulNbr). You must calling the | +| "i_APCI1710_InitPWM" function be for you call this | +| function. | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Selected module number (0 to 3) | +| BYTE_ b_PWM : Selected PWM (0 or 1) | ++----------------------------------------------------------------------------+ +| Output Parameters : PBYTE_ pb_TimingUnit : Base timing Unit (0 to 4) | +| 0 : ns | +| 1 : æs | +| 2 : ms | +| 3 : s | +| 4 : mn | +| PULONG_ pul_LowTiming : Low base timing value. | +| PULONG_ pul_HighTiming : High base timing value. | +| PBYTE_ pb_StartLevel : Start period level | +| selection | +| 0 : The period start | +| with a low level | +| 1 : The period start | +| with a high level| +| PBYTE_ pb_StopMode : Stop mode selection | +| 0 : The PWM is stopped | +| directly after the | +| "i_APCI1710_DisablePWM"| +| function and break the| +| last period | +| 1 : After the | +| "i_APCI1710_DisablePWM"| +| function the PWM is | +| stopped at the end | +| from last period cycle| +| PBYTE_ pb_StopLevel : Stop PWM level selection | +| 0 : The output signal | +| keep the level after| +| the | +| "i_APCI1710_DisablePWM"| +| function | +| 1 : The output signal is| +| set to low after the| +| "i_APCI1710_DisablePWM"| +| function | +| 2 : The output signal is| +| set to high after | +| the | +| "i_APCI1710_DisablePWM"| +| function | +| PBYTE_ pb_ExternGate : Extern gate action | +| selection | +| 0 : Extern gate signal | +| not used. | +| 1 : Extern gate signal | +| used. | +| PBYTE_ pb_InterruptEnable : Enable or disable the PWM | +| interrupt. | +| - APCI1710_ENABLE : | +| Enable the PWM interrupt| +| A interrupt occur after | +| each period | +| - APCI1710_DISABLE : | +| Disable the PWM | +| interrupt | +| PBYTE_ pb_Enable : Indicate if the PWM is | +| enabled or no | +| 0 : PWM not enabled | +| 1 : PWM enabled | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection wrong | +| -3: The module is not a PWM module | +| -4: PWM selection is wrong | +| -5: PWM not initialised see function | +| "i_APCI1710_InitPWM" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_GetPWMInitialisation(comedi_device * dev, + BYTE b_ModulNbr, + BYTE b_PWM, + PBYTE pb_TimingUnit, + PULONG pul_LowTiming, + PULONG pul_HighTiming, + PBYTE pb_StartLevel, + PBYTE pb_StopMode, + PBYTE pb_StopLevel, + PBYTE pb_ExternGate, PBYTE pb_InterruptEnable, PBYTE pb_Enable) +{ + INT i_ReturnValue = 0; + DWORD dw_Status; + DWORD dw_Command; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /***************/ + /* Test if PWM */ + /***************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_PWM) { + /**************************/ + /* Test the PWM selection */ + /**************************/ + + if (b_PWM <= 1) { + /***************************/ + /* Test if PWM initialised */ + /***************************/ + + dw_Status = inl(devpriv->s_BoardInfos. + ui_Address + 12 + (20 * b_PWM) + + (64 * b_ModulNbr)); + + if (dw_Status & 0x10) { + /***********************/ + /* Read the low timing */ + /***********************/ + + *pul_LowTiming = + inl(devpriv->s_BoardInfos. + ui_Address + 0 + (20 * b_PWM) + + (64 * b_ModulNbr)); + + /************************/ + /* Read the high timing */ + /************************/ + + *pul_HighTiming = + inl(devpriv->s_BoardInfos. + ui_Address + 4 + (20 * b_PWM) + + (64 * b_ModulNbr)); + + /********************/ + /* Read the command */ + /********************/ + + dw_Command = inl(devpriv->s_BoardInfos. + ui_Address + 8 + (20 * b_PWM) + + (64 * b_ModulNbr)); + + *pb_StartLevel = + (BYTE) ((dw_Command >> 5) & 1); + *pb_StopMode = + (BYTE) ((dw_Command >> 0) & 1); + *pb_StopLevel = + (BYTE) ((dw_Command >> 1) & 1); + *pb_ExternGate = + (BYTE) ((dw_Command >> 4) & 1); + *pb_InterruptEnable = + (BYTE) ((dw_Command >> 3) & 1); + + if (*pb_StopLevel) { + *pb_StopLevel = + *pb_StopLevel + + (BYTE) ((dw_Command >> + 2) & 1); + } + + /********************/ + /* Read the command */ + /********************/ + + dw_Command = inl(devpriv->s_BoardInfos. + ui_Address + 8 + (20 * b_PWM) + + (64 * b_ModulNbr)); + + *pb_Enable = + (BYTE) ((dw_Command >> 0) & 1); + + *pb_TimingUnit = devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_PWMModuleInfo. + s_PWMInfo[b_PWM].b_TimingUnit; + } // if (dw_Status & 0x10) + else { + /***********************/ + /* PWM not initialised */ + /***********************/ + DPRINTK("PWM not initialised\n"); + i_ReturnValue = -5; + } // if (dw_Status & 0x10) + } // if (b_PWM >= 0 && b_PWM <= 1) + else { + /******************************/ + /* Tor PWM selection is wrong */ + /******************************/ + DPRINTK("Tor PWM selection is wrong\n"); + i_ReturnValue = -4; + } // if (b_PWM >= 0 && b_PWM <= 1) + } else { + /**********************************/ + /* The module is not a PWM module */ + /**********************************/ + DPRINTK("The module is not a PWM module\n"); + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name :INT i_APCI1710_InsnWritePWM(comedi_device *dev, +comedi_subdevice *s,comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Pwm Enable Disable and Set New Timing | ++----------------------------------------------------------------------------+ +| Input Parameters : ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnWritePWM(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + BYTE b_WriteType; + INT i_ReturnValue = 0; + b_WriteType = CR_CHAN(insn->chanspec); + + switch (b_WriteType) { + case APCI1710_PWM_ENABLE: + i_ReturnValue = i_APCI1710_EnablePWM(dev, + (BYTE) CR_AREF(insn->chanspec), + (BYTE) data[0], + (BYTE) data[1], + (BYTE) data[2], + (BYTE) data[3], (BYTE) data[4], (BYTE) data[5]); + break; + + case APCI1710_PWM_DISABLE: + i_ReturnValue = i_APCI1710_DisablePWM(dev, + (BYTE) CR_AREF(insn->chanspec), (BYTE) data[0]); + break; + + case APCI1710_PWM_NEWTIMING: + i_ReturnValue = i_APCI1710_SetNewPWMTiming(dev, + (BYTE) CR_AREF(insn->chanspec), + (BYTE) data[0], + (BYTE) data[1], (ULONG) data[2], (ULONG) data[3]); + break; + + default: + printk("Write Config Parameter Wrong\n"); + } + + if (i_ReturnValue >= 0) + i_ReturnValue = insn->n; + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_EnablePWM | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_PWM, | +| BYTE_ b_StartLevel, | +| BYTE_ b_StopMode, | +| BYTE_ b_StopLevel, | +| BYTE_ b_ExternGate, | +| BYTE_ b_InterruptEnable) | ++----------------------------------------------------------------------------+ +| Task : Enable the selected PWM (b_PWM) from selected module | +| (b_ModulNbr). You must calling the "i_APCI1710_InitPWM"| +| function be for you call this function. | +| If you enable the PWM interrupt, the PWM generate a | +| interrupt after each period. | +| See function "i_APCI1710_SetBoardIntRoutineX" and the | +| Interrupt mask description chapter. | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Selected module number | +| (0 to 3) | +| BYTE_ b_PWM : Selected PWM (0 or 1) | +| BYTE_ b_StartLevel : Start period level selection | +| 0 : The period start with a | +| low level | +| 1 : The period start with a | +| high level | +| BYTE_ b_StopMode : Stop mode selection | +| 0 : The PWM is stopped | +| directly after the | +| "i_APCI1710_DisablePWM" | +| function and break the | +| last period | +| 1 : After the | +| "i_APCI1710_DisablePWM" | +| function the PWM is | +| stopped at the end from| +| last period cycle. | +| BYTE_ b_StopLevel : Stop PWM level selection | +| 0 : The output signal keep | +| the level after the | +| "i_APCI1710_DisablePWM" | +| function | +| 1 : The output signal is set| +| to low after the | +| "i_APCI1710_DisablePWM" | +| function | +| 2 : The output signal is set| +| to high after the | +| "i_APCI1710_DisablePWM" | +| function | +| BYTE_ b_ExternGate : Extern gate action selection | +| 0 : Extern gate signal not | +| used. | +| 1 : Extern gate signal used.| +| BYTE_ b_InterruptEnable : Enable or disable the PWM | +| interrupt. | +| - APCI1710_ENABLE : | +| Enable the PWM interrupt | +| A interrupt occur after | +| each period | +| - APCI1710_DISABLE : | +| Disable the PWM interrupt | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection wrong | +| -3: The module is not a PWM module | +| -4: PWM selection is wrong | +| -5: PWM not initialised see function | +| "i_APCI1710_InitPWM" | +| -6: PWM start level selection is wrong | +| -7: PWM stop mode selection is wrong | +| -8: PWM stop level selection is wrong | +| -9: Extern gate signal selection is wrong | +| -10: Interrupt parameter is wrong | +| -11: Interrupt function not initialised. | +| See function "i_APCI1710_SetBoardIntRoutineX" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_EnablePWM(comedi_device * dev, + BYTE b_ModulNbr, + BYTE b_PWM, + BYTE b_StartLevel, + BYTE b_StopMode, + BYTE b_StopLevel, BYTE b_ExternGate, BYTE b_InterruptEnable) +{ + INT i_ReturnValue = 0; + DWORD dw_Status; + DWORD dw_Command; + + devpriv->tsk_Current = current; // Save the current process task structure + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /***************/ + /* Test if PWM */ + /***************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_PWM) { + /**************************/ + /* Test the PWM selection */ + /**************************/ + + if (b_PWM <= 1) { + /***************************/ + /* Test if PWM initialised */ + /***************************/ + + dw_Status = inl(devpriv->s_BoardInfos. + ui_Address + 12 + (20 * b_PWM) + + (64 * b_ModulNbr)); + + if (dw_Status & 0x10) { + /**********************************/ + /* Test the start level selection */ + /**********************************/ + + if (b_StartLevel <= 1) { + /**********************/ + /* Test the stop mode */ + /**********************/ + + if (b_StopMode <= 1) { + /***********************/ + /* Test the stop level */ + /***********************/ + + if (b_StopLevel <= 2) { + /*****************************/ + /* Test the extern gate mode */ + /*****************************/ + + if (b_ExternGate + <= 1) { + /*****************************/ + /* Test the interrupt action */ + /*****************************/ + + if (b_InterruptEnable == APCI1710_ENABLE || b_InterruptEnable == APCI1710_DISABLE) { + /******************************************/ + /* Test if interrupt function initialised */ + /******************************************/ + + /********************/ + /* Read the command */ + /********************/ + + dw_Command + = + inl + (devpriv-> + s_BoardInfos. + ui_Address + + + 8 + + + (20 * b_PWM) + (64 * b_ModulNbr)); + + dw_Command + = + dw_Command + & + 0x80; + + /********************/ + /* Make the command */ + /********************/ + + dw_Command + = + dw_Command + | + b_StopMode + | + (b_InterruptEnable + << + 3) + | + (b_ExternGate + << + 4) + | + (b_StartLevel + << + 5); + + if (b_StopLevel & 3) { + dw_Command + = + dw_Command + | + 2; + + if (b_StopLevel & 2) { + dw_Command + = + dw_Command + | + 4; + } + } + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PWMModuleInfo. + s_PWMInfo + [b_PWM]. + b_InterruptEnable + = + b_InterruptEnable; + + /*******************/ + /* Set the command */ + /*******************/ + + outl(dw_Command, devpriv->s_BoardInfos.ui_Address + 8 + (20 * b_PWM) + (64 * b_ModulNbr)); + + /******************/ + /* Enable the PWM */ + /******************/ + outl(1, devpriv->s_BoardInfos.ui_Address + 12 + (20 * b_PWM) + (64 * b_ModulNbr)); + } // if (b_InterruptEnable == APCI1710_ENABLE || b_InterruptEnable == APCI1710_DISABLE) + else { + /********************************/ + /* Interrupt parameter is wrong */ + /********************************/ + DPRINTK("Interrupt parameter is wrong\n"); + i_ReturnValue + = + -10; + } // if (b_InterruptEnable == APCI1710_ENABLE || b_InterruptEnable == APCI1710_DISABLE) + } // if (b_ExternGate >= 0 && b_ExternGate <= 1) + else { + /*****************************************/ + /* Extern gate signal selection is wrong */ + /*****************************************/ + DPRINTK("Extern gate signal selection is wrong\n"); + i_ReturnValue + = + -9; + } // if (b_ExternGate >= 0 && b_ExternGate <= 1) + } // if (b_StopLevel >= 0 && b_StopLevel <= 2) + else { + /*************************************/ + /* PWM stop level selection is wrong */ + /*************************************/ + DPRINTK("PWM stop level selection is wrong\n"); + i_ReturnValue = + -8; + } // if (b_StopLevel >= 0 && b_StopLevel <= 2) + } // if (b_StopMode >= 0 && b_StopMode <= 1) + else { + /************************************/ + /* PWM stop mode selection is wrong */ + /************************************/ + DPRINTK("PWM stop mode selection is wrong\n"); + i_ReturnValue = -7; + } // if (b_StopMode >= 0 && b_StopMode <= 1) + } // if (b_StartLevel >= 0 && b_StartLevel <= 1) + else { + /**************************************/ + /* PWM start level selection is wrong */ + /**************************************/ + DPRINTK("PWM start level selection is wrong\n"); + i_ReturnValue = -6; + } // if (b_StartLevel >= 0 && b_StartLevel <= 1) + } // if (dw_Status & 0x10) + else { + /***********************/ + /* PWM not initialised */ + /***********************/ + DPRINTK("PWM not initialised\n"); + i_ReturnValue = -5; + } // if (dw_Status & 0x10) + } // if (b_PWM >= 0 && b_PWM <= 1) + else { + /******************************/ + /* Tor PWM selection is wrong */ + /******************************/ + DPRINTK("Tor PWM selection is wrong\n"); + i_ReturnValue = -4; + } // if (b_PWM >= 0 && b_PWM <= 1) + } else { + /**********************************/ + /* The module is not a PWM module */ + /**********************************/ + DPRINTK("The module is not a PWM module\n"); + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_DisablePWM (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_PWM) | ++----------------------------------------------------------------------------+ +| Task : Disable the selected PWM (b_PWM) from selected module | +| (b_ModulNbr). The output signal level depend of the | +| initialisation by the "i_APCI1710_EnablePWM". | +| See the b_StartLevel, b_StopMode and b_StopLevel | +| parameters from this function. | ++----------------------------------------------------------------------------+ +| Input Parameters :BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Selected module number (0 to 3) | +| BYTE_ b_PWM : Selected PWM (0 or 1) | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection wrong | +| -3: The module is not a PWM module | +| -4: PWM selection is wrong | +| -5: PWM not initialised see function | +| "i_APCI1710_InitPWM" | +| -6: PWM not enabled see function | +| "i_APCI1710_EnablePWM" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_DisablePWM(comedi_device * dev, BYTE b_ModulNbr, BYTE b_PWM) +{ + INT i_ReturnValue = 0; + DWORD dw_Status; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /***************/ + /* Test if PWM */ + /***************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_PWM) { + /**************************/ + /* Test the PWM selection */ + /**************************/ + + if (b_PWM <= 1) { + /***************************/ + /* Test if PWM initialised */ + /***************************/ + + dw_Status = inl(devpriv->s_BoardInfos. + ui_Address + 12 + (20 * b_PWM) + + (64 * b_ModulNbr)); + + if (dw_Status & 0x10) { + /***********************/ + /* Test if PWM enabled */ + /***********************/ + + if (dw_Status & 0x1) { + /*******************/ + /* Disable the PWM */ + /*******************/ + outl(0, devpriv->s_BoardInfos. + ui_Address + 12 + + (20 * b_PWM) + + (64 * b_ModulNbr)); + } // if (dw_Status & 0x1) + else { + /*******************/ + /* PWM not enabled */ + /*******************/ + DPRINTK("PWM not enabled\n"); + i_ReturnValue = -6; + } // if (dw_Status & 0x1) + } // if (dw_Status & 0x10) + else { + /***********************/ + /* PWM not initialised */ + /***********************/ + DPRINTK(" PWM not initialised\n"); + i_ReturnValue = -5; + } // if (dw_Status & 0x10) + } // if (b_PWM >= 0 && b_PWM <= 1) + else { + /******************************/ + /* Tor PWM selection is wrong */ + /******************************/ + DPRINTK("Tor PWM selection is wrong\n"); + i_ReturnValue = -4; + } // if (b_PWM >= 0 && b_PWM <= 1) + } else { + /**********************************/ + /* The module is not a PWM module */ + /**********************************/ + DPRINTK("The module is not a PWM module\n"); + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_SetNewPWMTiming | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_PWM, | +| BYTE_ b_ClockSelection, | +| BYTE_ b_TimingUnit, | +| ULONG_ ul_LowTiming, | +| ULONG_ ul_HighTiming) | ++----------------------------------------------------------------------------+ +| Task : Set a new timing. The ul_LowTiming, ul_HighTiming and | +| ul_TimingUnit determine the low/high timing base for | +| the period. | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Module number to configure| +| (0 to 3) | +| BYTE_ b_PWM : Selected PWM (0 or 1). | +| BYTE_ b_TimingUnit : Base timing Unit (0 to 4) | +| 0 : ns | +| 1 : æs | +| 2 : ms | +| 3 : s | +| 4 : mn | +| ULONG_ ul_LowTiming : Low base timing value. | +| ULONG_ ul_HighTiming : High base timing value. | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection wrong | +| -3: The module is not a PWM module | +| -4: PWM selection is wrong | +| -5: PWM not initialised | +| -6: Timing Unit selection is wrong | +| -7: Low base timing selection is wrong | +| -8: High base timing selection is wrong | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_SetNewPWMTiming(comedi_device * dev, + BYTE b_ModulNbr, + BYTE b_PWM, BYTE b_TimingUnit, ULONG ul_LowTiming, ULONG ul_HighTiming) +{ + BYTE b_ClockSelection; + INT i_ReturnValue = 0; + ULONG ul_LowTimerValue = 0; + ULONG ul_HighTimerValue = 0; + ULONG ul_RealLowTiming = 0; + ULONG ul_RealHighTiming = 0; + DWORD dw_Status; + DWORD dw_Command; + double d_RealLowTiming = 0; + double d_RealHighTiming = 0; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /***************/ + /* Test if PWM */ + /***************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_PWM) { + /**************************/ + /* Test the PWM selection */ + /**************************/ + + if (b_PWM <= 1) { + /***************************/ + /* Test if PWM initialised */ + /***************************/ + + dw_Status = inl(devpriv->s_BoardInfos. + ui_Address + 12 + (20 * b_PWM) + + (64 * b_ModulNbr)); + + if (dw_Status & 0x10) { + b_ClockSelection = devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_PWMModuleInfo. + b_ClockSelection; + + /************************/ + /* Test the timing unit */ + /************************/ + + if (b_TimingUnit <= 4) { + /*********************************/ + /* Test the low timing selection */ + /*********************************/ + + if (((b_ClockSelection == + APCI1710_30MHZ) + && (b_TimingUnit + == 0) + && (ul_LowTiming + >= 266) + && (ul_LowTiming + <= + 0xFFFFFFFFUL)) + || ((b_ClockSelection == + APCI1710_30MHZ) + && (b_TimingUnit + == 1) + && (ul_LowTiming + >= 1) + && (ul_LowTiming + <= + 571230650UL)) + || ((b_ClockSelection == + APCI1710_30MHZ) + && (b_TimingUnit + == 2) + && (ul_LowTiming + >= 1) + && (ul_LowTiming + <= + 571230UL)) + || ((b_ClockSelection == + APCI1710_30MHZ) + && (b_TimingUnit + == 3) + && (ul_LowTiming + >= 1) + && (ul_LowTiming + <= + 571UL)) + || ((b_ClockSelection == + APCI1710_30MHZ) + && (b_TimingUnit + == 4) + && (ul_LowTiming + >= 1) + && (ul_LowTiming + <= 9UL)) + || ((b_ClockSelection == + APCI1710_33MHZ) + && (b_TimingUnit + == 0) + && (ul_LowTiming + >= 242) + && (ul_LowTiming + <= + 0xFFFFFFFFUL)) + || ((b_ClockSelection == + APCI1710_33MHZ) + && (b_TimingUnit + == 1) + && (ul_LowTiming + >= 1) + && (ul_LowTiming + <= + 519691043UL)) + || ((b_ClockSelection == + APCI1710_33MHZ) + && (b_TimingUnit + == 2) + && (ul_LowTiming + >= 1) + && (ul_LowTiming + <= + 519691UL)) + || ((b_ClockSelection == + APCI1710_33MHZ) + && (b_TimingUnit + == 3) + && (ul_LowTiming + >= 1) + && (ul_LowTiming + <= + 520UL)) + || ((b_ClockSelection == + APCI1710_33MHZ) + && (b_TimingUnit + == 4) + && (ul_LowTiming + >= 1) + && (ul_LowTiming + <= 8UL)) + || ((b_ClockSelection == + APCI1710_40MHZ) + && (b_TimingUnit + == 0) + && (ul_LowTiming + >= 200) + && (ul_LowTiming + <= + 0xFFFFFFFFUL)) + || ((b_ClockSelection == + APCI1710_40MHZ) + && (b_TimingUnit + == 1) + && (ul_LowTiming + >= 1) + && (ul_LowTiming + <= + 429496729UL)) + || ((b_ClockSelection == + APCI1710_40MHZ) + && (b_TimingUnit + == 2) + && (ul_LowTiming + >= 1) + && (ul_LowTiming + <= + 429496UL)) + || ((b_ClockSelection == + APCI1710_40MHZ) + && (b_TimingUnit + == 3) + && (ul_LowTiming + >= 1) + && (ul_LowTiming + <= + 429UL)) + || ((b_ClockSelection == + APCI1710_40MHZ) + && (b_TimingUnit + == 4) + && (ul_LowTiming + >= 1) + && (ul_LowTiming + <= + 7UL))) { + /**********************************/ + /* Test the High timing selection */ + /**********************************/ + + if (((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 0) && (ul_HighTiming >= 266) && (ul_HighTiming <= 0xFFFFFFFFUL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 1) && (ul_HighTiming >= 1) && (ul_HighTiming <= 571230650UL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 2) && (ul_HighTiming >= 1) && (ul_HighTiming <= 571230UL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 3) && (ul_HighTiming >= 1) && (ul_HighTiming <= 571UL)) || ((b_ClockSelection == APCI1710_30MHZ) && (b_TimingUnit == 4) && (ul_HighTiming >= 1) && (ul_HighTiming <= 9UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 0) && (ul_HighTiming >= 242) && (ul_HighTiming <= 0xFFFFFFFFUL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 1) && (ul_HighTiming >= 1) && (ul_HighTiming <= 519691043UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 2) && (ul_HighTiming >= 1) && (ul_HighTiming <= 519691UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 3) && (ul_HighTiming >= 1) && (ul_HighTiming <= 520UL)) || ((b_ClockSelection == APCI1710_33MHZ) && (b_TimingUnit == 4) && (ul_HighTiming >= 1) && (ul_HighTiming <= 8UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 0) && (ul_HighTiming >= 200) && (ul_HighTiming <= 0xFFFFFFFFUL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 1) && (ul_HighTiming >= 1) && (ul_HighTiming <= 429496729UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 2) && (ul_HighTiming >= 1) && (ul_HighTiming <= 429496UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 3) && (ul_HighTiming >= 1) && (ul_HighTiming <= 429UL)) || ((b_ClockSelection == APCI1710_40MHZ) && (b_TimingUnit == 4) && (ul_HighTiming >= 1) && (ul_HighTiming <= 7UL))) { + /************************************/ + /* Calculate the low division fator */ + /************************************/ + + fpu_begin(); + switch (b_TimingUnit) { + /******/ + /* ns */ + /******/ + + case 0: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_LowTimerValue + = + (ULONG) + (ul_LowTiming + * + (0.00025 * b_ClockSelection)); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_LowTiming * (0.00025 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) { + ul_LowTimerValue + = + ul_LowTimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + ul_RealLowTiming + = + (ULONG) + (ul_LowTimerValue + / + (0.00025 * (double)b_ClockSelection)); + d_RealLowTiming + = + (double) + ul_LowTimerValue + / + (0.00025 + * + (double) + b_ClockSelection); + + if ((double)((double)ul_LowTimerValue / (0.00025 * (double)b_ClockSelection)) >= (double)((double)ul_RealLowTiming + 0.5)) { + ul_RealLowTiming + = + ul_RealLowTiming + + + 1; + } + + ul_LowTiming + = + ul_LowTiming + - + 1; + ul_LowTimerValue + = + ul_LowTimerValue + - + 2; + + if (b_ClockSelection != APCI1710_40MHZ) { + ul_LowTimerValue + = + (ULONG) + ( + (double) + (ul_LowTimerValue) + * + 1.007752288); + } + + break; + + /******/ + /* æs */ + /******/ + + case 1: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_LowTimerValue + = + (ULONG) + (ul_LowTiming + * + (0.25 * b_ClockSelection)); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_LowTiming * (0.25 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) { + ul_LowTimerValue + = + ul_LowTimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + ul_RealLowTiming + = + (ULONG) + (ul_LowTimerValue + / + (0.25 * (double)b_ClockSelection)); + d_RealLowTiming + = + (double) + ul_LowTimerValue + / + ( + (double) + 0.25 + * + (double) + b_ClockSelection); + + if ((double)((double)ul_LowTimerValue / (0.25 * (double)b_ClockSelection)) >= (double)((double)ul_RealLowTiming + 0.5)) { + ul_RealLowTiming + = + ul_RealLowTiming + + + 1; + } + + ul_LowTiming + = + ul_LowTiming + - + 1; + ul_LowTimerValue + = + ul_LowTimerValue + - + 2; + + if (b_ClockSelection != APCI1710_40MHZ) { + ul_LowTimerValue + = + (ULONG) + ( + (double) + (ul_LowTimerValue) + * + 1.007752288); + } + + break; + + /******/ + /* ms */ + /******/ + + case 2: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_LowTimerValue + = + ul_LowTiming + * + (250.0 + * + b_ClockSelection); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_LowTiming * (250.0 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) { + ul_LowTimerValue + = + ul_LowTimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + ul_RealLowTiming + = + (ULONG) + (ul_LowTimerValue + / + (250.0 * (double)b_ClockSelection)); + d_RealLowTiming + = + (double) + ul_LowTimerValue + / + (250.0 + * + (double) + b_ClockSelection); + + if ((double)((double)ul_LowTimerValue / (250.0 * (double)b_ClockSelection)) >= (double)((double)ul_RealLowTiming + 0.5)) { + ul_RealLowTiming + = + ul_RealLowTiming + + + 1; + } + + ul_LowTiming + = + ul_LowTiming + - + 1; + ul_LowTimerValue + = + ul_LowTimerValue + - + 2; + + if (b_ClockSelection != APCI1710_40MHZ) { + ul_LowTimerValue + = + (ULONG) + ( + (double) + (ul_LowTimerValue) + * + 1.007752288); + } + + break; + + /*****/ + /* s */ + /*****/ + + case 3: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_LowTimerValue + = + (ULONG) + (ul_LowTiming + * + (250000.0 + * + b_ClockSelection)); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_LowTiming * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) { + ul_LowTimerValue + = + ul_LowTimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + ul_RealLowTiming + = + (ULONG) + (ul_LowTimerValue + / + (250000.0 + * + (double) + b_ClockSelection)); + d_RealLowTiming + = + (double) + ul_LowTimerValue + / + (250000.0 + * + (double) + b_ClockSelection); + + if ((double)((double)ul_LowTimerValue / (250000.0 * (double)b_ClockSelection)) >= (double)((double)ul_RealLowTiming + 0.5)) { + ul_RealLowTiming + = + ul_RealLowTiming + + + 1; + } + + ul_LowTiming + = + ul_LowTiming + - + 1; + ul_LowTimerValue + = + ul_LowTimerValue + - + 2; + + if (b_ClockSelection != APCI1710_40MHZ) { + ul_LowTimerValue + = + (ULONG) + ( + (double) + (ul_LowTimerValue) + * + 1.007752288); + } + + break; + + /******/ + /* mn */ + /******/ + + case 4: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_LowTimerValue + = + (ULONG) + ( + (ul_LowTiming + * + 60) + * + (250000.0 + * + b_ClockSelection)); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)(ul_LowTiming * 60.0) * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_LowTimerValue + 0.5))) { + ul_LowTimerValue + = + ul_LowTimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + ul_RealLowTiming + = + (ULONG) + (ul_LowTimerValue + / + (250000.0 + * + (double) + b_ClockSelection)) + / + 60; + d_RealLowTiming + = + ( + (double) + ul_LowTimerValue + / + (250000.0 + * + (double) + b_ClockSelection)) + / + 60.0; + + if ((double)(((double)ul_LowTimerValue / (250000.0 * (double)b_ClockSelection)) / 60.0) >= (double)((double)ul_RealLowTiming + 0.5)) { + ul_RealLowTiming + = + ul_RealLowTiming + + + 1; + } + + ul_LowTiming + = + ul_LowTiming + - + 1; + ul_LowTimerValue + = + ul_LowTimerValue + - + 2; + + if (b_ClockSelection != APCI1710_40MHZ) { + ul_LowTimerValue + = + (ULONG) + ( + (double) + (ul_LowTimerValue) + * + 1.007752288); + } + + break; + } + + /*************************************/ + /* Calculate the high division fator */ + /*************************************/ + + switch (b_TimingUnit) { + /******/ + /* ns */ + /******/ + + case 0: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_HighTimerValue + = + (ULONG) + (ul_HighTiming + * + (0.00025 * b_ClockSelection)); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_HighTiming * (0.00025 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) { + ul_HighTimerValue + = + ul_HighTimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + ul_RealHighTiming + = + (ULONG) + (ul_HighTimerValue + / + (0.00025 * (double)b_ClockSelection)); + d_RealHighTiming + = + (double) + ul_HighTimerValue + / + (0.00025 + * + (double) + b_ClockSelection); + + if ((double)((double)ul_HighTimerValue / (0.00025 * (double)b_ClockSelection)) >= (double)((double)ul_RealHighTiming + 0.5)) { + ul_RealHighTiming + = + ul_RealHighTiming + + + 1; + } + + ul_HighTiming + = + ul_HighTiming + - + 1; + ul_HighTimerValue + = + ul_HighTimerValue + - + 2; + + if (b_ClockSelection != APCI1710_40MHZ) { + ul_HighTimerValue + = + (ULONG) + ( + (double) + (ul_HighTimerValue) + * + 1.007752288); + } + + break; + + /******/ + /* æs */ + /******/ + + case 1: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_HighTimerValue + = + (ULONG) + (ul_HighTiming + * + (0.25 * b_ClockSelection)); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_HighTiming * (0.25 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) { + ul_HighTimerValue + = + ul_HighTimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + ul_RealHighTiming + = + (ULONG) + (ul_HighTimerValue + / + (0.25 * (double)b_ClockSelection)); + d_RealHighTiming + = + (double) + ul_HighTimerValue + / + ( + (double) + 0.25 + * + (double) + b_ClockSelection); + + if ((double)((double)ul_HighTimerValue / (0.25 * (double)b_ClockSelection)) >= (double)((double)ul_RealHighTiming + 0.5)) { + ul_RealHighTiming + = + ul_RealHighTiming + + + 1; + } + + ul_HighTiming + = + ul_HighTiming + - + 1; + ul_HighTimerValue + = + ul_HighTimerValue + - + 2; + + if (b_ClockSelection != APCI1710_40MHZ) { + ul_HighTimerValue + = + (ULONG) + ( + (double) + (ul_HighTimerValue) + * + 1.007752288); + } + + break; + + /******/ + /* ms */ + /******/ + + case 2: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_HighTimerValue + = + ul_HighTiming + * + (250.0 + * + b_ClockSelection); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_HighTiming * (250.0 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) { + ul_HighTimerValue + = + ul_HighTimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + ul_RealHighTiming + = + (ULONG) + (ul_HighTimerValue + / + (250.0 * (double)b_ClockSelection)); + d_RealHighTiming + = + (double) + ul_HighTimerValue + / + (250.0 + * + (double) + b_ClockSelection); + + if ((double)((double)ul_HighTimerValue / (250.0 * (double)b_ClockSelection)) >= (double)((double)ul_RealHighTiming + 0.5)) { + ul_RealHighTiming + = + ul_RealHighTiming + + + 1; + } + + ul_HighTiming + = + ul_HighTiming + - + 1; + ul_HighTimerValue + = + ul_HighTimerValue + - + 2; + + if (b_ClockSelection != APCI1710_40MHZ) { + ul_HighTimerValue + = + (ULONG) + ( + (double) + (ul_HighTimerValue) + * + 1.007752288); + } + + break; + + /*****/ + /* s */ + /*****/ + + case 3: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_HighTimerValue + = + (ULONG) + (ul_HighTiming + * + (250000.0 + * + b_ClockSelection)); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_HighTiming * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) { + ul_HighTimerValue + = + ul_HighTimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + ul_RealHighTiming + = + (ULONG) + (ul_HighTimerValue + / + (250000.0 + * + (double) + b_ClockSelection)); + d_RealHighTiming + = + (double) + ul_HighTimerValue + / + (250000.0 + * + (double) + b_ClockSelection); + + if ((double)((double)ul_HighTimerValue / (250000.0 * (double)b_ClockSelection)) >= (double)((double)ul_RealHighTiming + 0.5)) { + ul_RealHighTiming + = + ul_RealHighTiming + + + 1; + } + + ul_HighTiming + = + ul_HighTiming + - + 1; + ul_HighTimerValue + = + ul_HighTimerValue + - + 2; + + if (b_ClockSelection != APCI1710_40MHZ) { + ul_HighTimerValue + = + (ULONG) + ( + (double) + (ul_HighTimerValue) + * + 1.007752288); + } + + break; + + /******/ + /* mn */ + /******/ + + case 4: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_HighTimerValue + = + (ULONG) + ( + (ul_HighTiming + * + 60) + * + (250000.0 + * + b_ClockSelection)); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)(ul_HighTiming * 60.0) * (250000.0 * (double)b_ClockSelection)) >= ((double)((double)ul_HighTimerValue + 0.5))) { + ul_HighTimerValue + = + ul_HighTimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + ul_RealHighTiming + = + (ULONG) + (ul_HighTimerValue + / + (250000.0 + * + (double) + b_ClockSelection)) + / + 60; + d_RealHighTiming + = + ( + (double) + ul_HighTimerValue + / + (250000.0 + * + (double) + b_ClockSelection)) + / + 60.0; + + if ((double)(((double)ul_HighTimerValue / (250000.0 * (double)b_ClockSelection)) / 60.0) >= (double)((double)ul_RealHighTiming + 0.5)) { + ul_RealHighTiming + = + ul_RealHighTiming + + + 1; + } + + ul_HighTiming + = + ul_HighTiming + - + 1; + ul_HighTimerValue + = + ul_HighTimerValue + - + 2; + + if (b_ClockSelection != APCI1710_40MHZ) { + ul_HighTimerValue + = + (ULONG) + ( + (double) + (ul_HighTimerValue) + * + 1.007752288); + } + + break; + } + + fpu_end(); + + /************************/ + /* Save the timing unit */ + /************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PWMModuleInfo. + s_PWMInfo + [b_PWM]. + b_TimingUnit + = + b_TimingUnit; + + /****************************/ + /* Save the low base timing */ + /****************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PWMModuleInfo. + s_PWMInfo + [b_PWM]. + d_LowTiming + = + d_RealLowTiming; + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PWMModuleInfo. + s_PWMInfo + [b_PWM]. + ul_RealLowTiming + = + ul_RealLowTiming; + + /****************************/ + /* Save the high base timing */ + /****************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PWMModuleInfo. + s_PWMInfo + [b_PWM]. + d_HighTiming + = + d_RealHighTiming; + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_PWMModuleInfo. + s_PWMInfo + [b_PWM]. + ul_RealHighTiming + = + ul_RealHighTiming; + + /************************/ + /* Write the low timing */ + /************************/ + + outl(ul_LowTimerValue, devpriv->s_BoardInfos.ui_Address + 0 + (20 * b_PWM) + (64 * b_ModulNbr)); + + /*************************/ + /* Write the high timing */ + /*************************/ + + outl(ul_HighTimerValue, devpriv->s_BoardInfos.ui_Address + 4 + (20 * b_PWM) + (64 * b_ModulNbr)); + + /***************************/ + /* Set the clock selection */ + /***************************/ + + dw_Command = + inl + (devpriv-> + s_BoardInfos. + ui_Address + + 8 + + (20 * b_PWM) + (64 * b_ModulNbr)); + + dw_Command = + dw_Command + & 0x7F; + + if (b_ClockSelection == APCI1710_40MHZ) { + dw_Command + = + dw_Command + | + 0x80; + } + + /***************************/ + /* Set the clock selection */ + /***************************/ + + outl(dw_Command, + devpriv-> + s_BoardInfos. + ui_Address + + 8 + + (20 * b_PWM) + (64 * b_ModulNbr)); + } else { + /***************************************/ + /* High base timing selection is wrong */ + /***************************************/ + DPRINTK("High base timing selection is wrong\n"); + i_ReturnValue = + -8; + } + } else { + /**************************************/ + /* Low base timing selection is wrong */ + /**************************************/ + DPRINTK("Low base timing selection is wrong\n"); + i_ReturnValue = -7; + } + } // if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) + else { + /**********************************/ + /* Timing unit selection is wrong */ + /**********************************/ + DPRINTK("Timing unit selection is wrong\n"); + i_ReturnValue = -6; + } // if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) + } // if (dw_Status & 0x10) + else { + /***********************/ + /* PWM not initialised */ + /***********************/ + DPRINTK("PWM not initialised\n"); + i_ReturnValue = -5; + } // if (dw_Status & 0x10) + } // if (b_PWM >= 0 && b_PWM <= 1) + else { + /******************************/ + /* Tor PWM selection is wrong */ + /******************************/ + DPRINTK("Tor PWM selection is wrong\n"); + i_ReturnValue = -4; + } // if (b_PWM >= 0 && b_PWM <= 1) + } else { + /**********************************/ + /* The module is not a PWM module */ + /**********************************/ + DPRINTK("The module is not a PWM module\n"); + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_GetPWMStatus | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_PWM, | +| PBYTE_ pb_PWMOutputStatus, | +| PBYTE_ pb_ExternGateStatus) | ++----------------------------------------------------------------------------+ +| Task : Return the status from selected PWM (b_PWM) from | +| selected module (b_ModulNbr). | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_PWM : Selected PWM (0 or 1) | +| BYTE_ b_ModulNbr : Selected module number (0 to 3) + b_ModulNbr =(BYTE) CR_AREF(insn->chanspec); + b_PWM =(BYTE) data[0]; + + | ++----------------------------------------------------------------------------+ +| Output Parameters : PBYTE_ pb_PWMOutputStatus : Return the PWM output | +| level status. | +| 0 : The PWM output level| +| is low. | +| 1 : The PWM output level| +| is high. | +| PBYTE_ pb_ExternGateStatus : Return the extern gate | +| level status. | +| 0 : The extern gate is | +| low. | +| 1 : The extern gate is | +| high. + pb_PWMOutputStatus =(PBYTE) data[0]; + pb_ExternGateStatus =(PBYTE) data[1]; | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection wrong | +| -3: The module is not a PWM module | +| -4: PWM selection is wrong | +| -5: PWM not initialised see function | +| "i_APCI1710_InitPWM" | +| -6: PWM not enabled see function "i_APCI1710_EnablePWM"| ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnReadGetPWMStatus(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = 0; + DWORD dw_Status; + + BYTE b_ModulNbr; + BYTE b_PWM; + PBYTE pb_PWMOutputStatus; + PBYTE pb_ExternGateStatus; + + i_ReturnValue = insn->n; + b_ModulNbr = (BYTE) CR_AREF(insn->chanspec); + b_PWM = (BYTE) CR_CHAN(insn->chanspec); + pb_PWMOutputStatus = (PBYTE) & data[0]; + pb_ExternGateStatus = (PBYTE) & data[1]; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /***************/ + /* Test if PWM */ + /***************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_PWM) { + /**************************/ + /* Test the PWM selection */ + /**************************/ + + if (b_PWM <= 1) { + /***************************/ + /* Test if PWM initialised */ + /***************************/ + + dw_Status = inl(devpriv->s_BoardInfos. + ui_Address + 12 + (20 * b_PWM) + + (64 * b_ModulNbr)); + + if (dw_Status & 0x10) { + /***********************/ + /* Test if PWM enabled */ + /***********************/ + + if (dw_Status & 0x1) { + *pb_PWMOutputStatus = + (BYTE) ((dw_Status >> 7) + & 1); + *pb_ExternGateStatus = + (BYTE) ((dw_Status >> 6) + & 1); + } // if (dw_Status & 0x1) + else { + /*******************/ + /* PWM not enabled */ + /*******************/ + + DPRINTK("PWM not enabled \n"); + i_ReturnValue = -6; + } // if (dw_Status & 0x1) + } // if (dw_Status & 0x10) + else { + /***********************/ + /* PWM not initialised */ + /***********************/ + + DPRINTK("PWM not initialised\n"); + i_ReturnValue = -5; + } // if (dw_Status & 0x10) + } // if (b_PWM >= 0 && b_PWM <= 1) + else { + /******************************/ + /* Tor PWM selection is wrong */ + /******************************/ + + DPRINTK("Tor PWM selection is wrong\n"); + i_ReturnValue = -4; + } // if (b_PWM >= 0 && b_PWM <= 1) + } else { + /**********************************/ + /* The module is not a PWM module */ + /**********************************/ + + DPRINTK("The module is not a PWM module\n"); + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +INT i_APCI1710_InsnBitsReadPWMInterrupt(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + data[0] = devpriv->s_InterruptParameters. + s_FIFOInterruptParameters[devpriv-> + s_InterruptParameters.ui_Read].b_OldModuleMask; + data[1] = devpriv->s_InterruptParameters. + s_FIFOInterruptParameters[devpriv-> + s_InterruptParameters.ui_Read].ul_OldInterruptMask; + data[2] = devpriv->s_InterruptParameters. + s_FIFOInterruptParameters[devpriv-> + s_InterruptParameters.ui_Read].ul_OldCounterLatchValue; + + /**************************/ + /* Increment the read FIFO */ + /***************************/ + + devpriv-> + s_InterruptParameters. + ui_Read = (devpriv-> + s_InterruptParameters.ui_Read + 1) % APCI1710_SAVE_INTERRUPT; + + return insn->n; + +} --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Pwm.h @@ -0,0 +1,79 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ + +#define APCI1710_30MHZ 30 +#define APCI1710_33MHZ 33 +#define APCI1710_40MHZ 40 + +#define APCI1710_PWM_INIT 0 +#define APCI1710_PWM_GETINITDATA 1 + +#define APCI1710_PWM_DISABLE 0 +#define APCI1710_PWM_ENABLE 1 +#define APCI1710_PWM_NEWTIMING 2 + +INT i_APCI1710_InsnConfigPWM(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +INT i_APCI1710_InitPWM(comedi_device * dev, + BYTE b_ModulNbr, + BYTE b_PWM, + BYTE b_ClockSelection, + BYTE b_TimingUnit, + ULONG ul_LowTiming, + ULONG ul_HighTiming, + PULONG pul_RealLowTiming, PULONG pul_RealHighTiming); + +INT i_APCI1710_GetPWMInitialisation(comedi_device * dev, + BYTE b_ModulNbr, + BYTE b_PWM, + PBYTE pb_TimingUnit, + PULONG pul_LowTiming, + PULONG pul_HighTiming, + PBYTE pb_StartLevel, + PBYTE pb_StopMode, + PBYTE pb_StopLevel, + PBYTE pb_ExternGate, PBYTE pb_InterruptEnable, PBYTE pb_Enable); + +INT i_APCI1710_InsnWritePWM(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +INT i_APCI1710_EnablePWM(comedi_device * dev, + BYTE b_ModulNbr, + BYTE b_PWM, + BYTE b_StartLevel, + BYTE b_StopMode, + BYTE b_StopLevel, BYTE b_ExternGate, BYTE b_InterruptEnable); + +INT i_APCI1710_SetNewPWMTiming(comedi_device * dev, + BYTE b_ModulNbr, + BYTE b_PWM, BYTE b_TimingUnit, ULONG ul_LowTiming, ULONG ul_HighTiming); + +INT i_APCI1710_DisablePWM(comedi_device * dev, BYTE b_ModulNbr, BYTE b_PWM); + +INT i_APCI1710_InsnReadGetPWMStatus(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +INT i_APCI1710_InsnBitsReadPWMInterrupt(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c @@ -0,0 +1,848 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-----------------------------------------------------------------------+ + | Project : API APCI1710 | Compiler : gcc | + | Module name : SSI.C | Version : 2.96 | + +-------------------------------+---------------------------------------+ + | Project manager: Eric Stolz | Date : 02/12/2002 | + +-----------------------------------------------------------------------+ + | Description : APCI-1710 SSI counter module | + | | + | | + +-----------------------------------------------------------------------+ + | UPDATES | + +-----------------------------------------------------------------------+ + | Date | Author | Description of updates | + +----------+-----------+------------------------------------------------+ + | 13/05/98 | S. Weber | SSI digital input / output implementation | + |----------|-----------|------------------------------------------------| + | 22/03/00 | C.Guinot | 0100/0226 -> 0200/0227 | + | | | Änderung in InitSSI Funktion | + | | | b_SSIProfile >= 2 anstatt b_SSIProfile > 2 | + | | | | + +-----------------------------------------------------------------------+ + | 08/05/00 | Guinot C | - 0400/0228 All Function in RING 0 | + | | | available | + +-----------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Included files | ++----------------------------------------------------------------------------+ +*/ + +#include "APCI1710_Ssi.h" + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_InitSSI | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_SSIProfile, | +| BYTE_ b_PositionTurnLength, | +| BYTE_ b_TurnCptLength, | +| BYTE_ b_PCIInputClock, | +| ULONG_ ul_SSIOutputClock, | +| BYTE_ b_SSICountingMode) | ++----------------------------------------------------------------------------+ +| Task : Configure the SSI operating mode from selected module | +| (b_ModulNbr). You must calling this function be for you| +| call any other function witch access of SSI. | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710| +| BYTE_ b_ModulNbr : Module number to | +| configure (0 to 3) | +| BYTE_ b_SSIProfile : Selection from SSI | +| profile length (2 to 32).| +| BYTE_ b_PositionTurnLength : Selection from SSI | +| position data length | +| (1 to 31). | +| BYTE_ b_TurnCptLength : Selection from SSI turn | +| counter data length | +| (1 to 31). | +| BYTE b_PCIInputClock : Selection from PCI bus | +| clock | +| - APCI1710_30MHZ : | +| The PC have a PCI bus | +| clock from 30 MHz | +| - APCI1710_33MHZ : | +| The PC have a PCI bus | +| clock from 33 MHz | +| ULONG_ ul_SSIOutputClock : Selection from SSI output| +| clock. | +| From 229 to 5 000 000 Hz| +| for 30 MHz selection. | +| From 252 to 5 000 000 Hz| +| for 33 MHz selection. | +| BYTE b_SSICountingMode : SSI counting mode | +| selection | +| - APCI1710_BINARY_MODE : | +| Binary counting mode. | +| - APCI1710_GRAY_MODE : | +| Gray counting mode. + + b_ModulNbr = CR_AREF(insn->chanspec); + b_SSIProfile = (BYTE) data[0]; + b_PositionTurnLength= (BYTE) data[1]; + b_TurnCptLength = (BYTE) data[2]; + b_PCIInputClock = (BYTE) data[3]; + ul_SSIOutputClock = (ULONG) data[4]; + b_SSICountingMode = (BYTE) data[5]; | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: The module parameter is wrong | +| -3: The module is not a SSI module | +| -4: The selected SSI profile length is wrong | +| -5: The selected SSI position data length is wrong | +| -6: The selected SSI turn counter data length is wrong | +| -7: The selected PCI input clock is wrong | +| -8: The selected SSI output clock is wrong | +| -9: The selected SSI counting mode parameter is wrong | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnConfigInitSSI(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = 0; + UINT ui_TimerValue; + BYTE b_ModulNbr, b_SSIProfile, b_PositionTurnLength, b_TurnCptLength, + b_PCIInputClock, b_SSICountingMode; + ULONG ul_SSIOutputClock; + + b_ModulNbr = CR_AREF(insn->chanspec); + b_SSIProfile = (BYTE) data[0]; + b_PositionTurnLength = (BYTE) data[1]; + b_TurnCptLength = (BYTE) data[2]; + b_PCIInputClock = (BYTE) data[3]; + ul_SSIOutputClock = (ULONG) data[4]; + b_SSICountingMode = (BYTE) data[5]; + + i_ReturnValue = insn->n; + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /***********************/ + /* Test if SSI counter */ + /***********************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_SSI_COUNTER) { + /*******************************/ + /* Test the SSI profile length */ + /*******************************/ + + // CG 22/03/00 b_SSIProfile >= 2 anstatt b_SSIProfile > 2 + if (b_SSIProfile >= 2 && b_SSIProfile < 33) { + /*************************************/ + /* Test the SSI position data length */ + /*************************************/ + + if (b_PositionTurnLength > 0 + && b_PositionTurnLength < 32) { + /*****************************************/ + /* Test the SSI turn counter data length */ + /*****************************************/ + + if (b_TurnCptLength > 0 + && b_TurnCptLength < 32) { + /***************************/ + /* Test the profile length */ + /***************************/ + + if ((b_TurnCptLength + + b_PositionTurnLength) + <= b_SSIProfile) { + /****************************/ + /* Test the PCI input clock */ + /****************************/ + + if (b_PCIInputClock == + APCI1710_30MHZ + || + b_PCIInputClock + == + APCI1710_33MHZ) + { + /*************************/ + /* Test the output clock */ + /*************************/ + + if ((b_PCIInputClock == APCI1710_30MHZ && (ul_SSIOutputClock > 228 && ul_SSIOutputClock <= 5000000UL)) || (b_PCIInputClock == APCI1710_33MHZ && (ul_SSIOutputClock > 251 && ul_SSIOutputClock <= 5000000UL))) { + if (b_SSICountingMode == APCI1710_BINARY_MODE || b_SSICountingMode == APCI1710_GRAY_MODE) { + /**********************/ + /* Save configuration */ + /**********************/ + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SSICounterInfo. + b_SSIProfile + = + b_SSIProfile; + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SSICounterInfo. + b_PositionTurnLength + = + b_PositionTurnLength; + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SSICounterInfo. + b_TurnCptLength + = + b_TurnCptLength; + + /*********************************/ + /* Initialise the profile length */ + /*********************************/ + + if (b_SSICountingMode == APCI1710_BINARY_MODE) { + + outl(b_SSIProfile + 1, devpriv->s_BoardInfos.ui_Address + 4 + (64 * b_ModulNbr)); + } else { + + outl(b_SSIProfile, devpriv->s_BoardInfos.ui_Address + 4 + (64 * b_ModulNbr)); + } + + /******************************/ + /* Calculate the output clock */ + /******************************/ + + ui_TimerValue + = + (UINT) + ( + ((ULONG) (b_PCIInputClock) * 500000UL) / ul_SSIOutputClock); + + /************************/ + /* Initialise the timer */ + /************************/ + + outl(ui_TimerValue, devpriv->s_BoardInfos.ui_Address + (64 * b_ModulNbr)); + + /********************************/ + /* Initialise the counting mode */ + /********************************/ + + outl(7 * b_SSICountingMode, devpriv->s_BoardInfos.ui_Address + 12 + (64 * b_ModulNbr)); + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SSICounterInfo. + b_SSIInit + = + 1; + } else { + /*****************************************************/ + /* The selected SSI counting mode parameter is wrong */ + /*****************************************************/ + + DPRINTK("The selected SSI counting mode parameter is wrong\n"); + i_ReturnValue + = + -9; + } + } else { + /******************************************/ + /* The selected SSI output clock is wrong */ + /******************************************/ + + DPRINTK("The selected SSI output clock is wrong\n"); + i_ReturnValue + = + -8; + } + } else { + /*****************************************/ + /* The selected PCI input clock is wrong */ + /*****************************************/ + + DPRINTK("The selected PCI input clock is wrong\n"); + i_ReturnValue = + -7; + } + } else { + /********************************************/ + /* The selected SSI profile length is wrong */ + /********************************************/ + + DPRINTK("The selected SSI profile length is wrong\n"); + i_ReturnValue = -4; + } + } else { + /******************************************************/ + /* The selected SSI turn counter data length is wrong */ + /******************************************************/ + + DPRINTK("The selected SSI turn counter data length is wrong\n"); + i_ReturnValue = -6; + } + } else { + /**************************************************/ + /* The selected SSI position data length is wrong */ + /**************************************************/ + + DPRINTK("The selected SSI position data length is wrong\n"); + i_ReturnValue = -5; + } + } else { + /********************************************/ + /* The selected SSI profile length is wrong */ + /********************************************/ + + DPRINTK("The selected SSI profile length is wrong\n"); + i_ReturnValue = -4; + } + } else { + /**********************************/ + /* The module is not a SSI module */ + /**********************************/ + + DPRINTK("The module is not a SSI module\n"); + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_Read1SSIValue | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_SelectedSSI, | +| PULONG_ pul_Position, | +| PULONG_ pul_TurnCpt) + INT i_APCI1710_ReadSSIValue(comedi_device *dev,comedi_subdevice *s, + comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : + + + Read the selected SSI counter (b_SelectedSSI) from | +| selected module (b_ModulNbr). + or Read all SSI counter (b_SelectedSSI) from | +| selected module (b_ModulNbr). | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710| +| BYTE_ b_ModulNbr : Module number to | +| configure (0 to 3) | +| BYTE_ b_SelectedSSI : Selection from SSI | +| counter (0 to 2) + + b_ModulNbr = (BYTE) CR_AREF(insn->chanspec); + b_SelectedSSI = (BYTE) CR_CHAN(insn->chanspec); (in case of single ssi) + b_ReadType = (BYTE) CR_RANGE(insn->chanspec); +| ++----------------------------------------------------------------------------+ +| Output Parameters : PULONG_ pul_Position : SSI position in the turn | +| PULONG_ pul_TurnCpt : Number of turns + +pul_Position = (PULONG) &data[0]; + pul_TurnCpt = (PULONG) &data[1]; | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: The module parameter is wrong | +| -3: The module is not a SSI module | +| -4: SSI not initialised see function | +| "i_APCI1710_InitSSI" | +| -5: The selected SSI is wrong | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnReadSSIValue(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = 0; + BYTE b_Cpt; + BYTE b_Length; + BYTE b_Schift; + BYTE b_SSICpt; + DWORD dw_And; + DWORD dw_And1; + DWORD dw_And2; + DWORD dw_StatusReg; + DWORD dw_CounterValue; + BYTE b_ModulNbr; + BYTE b_SelectedSSI; + BYTE b_ReadType; + PULONG pul_Position; + PULONG pul_TurnCpt; + PULONG pul_Position1; + PULONG pul_TurnCpt1; + + i_ReturnValue = insn->n; + pul_Position1 = (PULONG) & data[0]; +// For Read1 + pul_TurnCpt1 = (PULONG) & data[1]; +// For Read all + pul_Position = (PULONG) & data[0]; //0-2 + pul_TurnCpt = (PULONG) & data[3]; //3-5 + b_ModulNbr = (BYTE) CR_AREF(insn->chanspec); + b_SelectedSSI = (BYTE) CR_CHAN(insn->chanspec); + b_ReadType = (BYTE) CR_RANGE(insn->chanspec); + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /***********************/ + /* Test if SSI counter */ + /***********************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_SSI_COUNTER) { + /***************************/ + /* Test if SSI initialised */ + /***************************/ + + if (devpriv->s_ModuleInfo[b_ModulNbr]. + s_SSICounterInfo.b_SSIInit == 1) { + + switch (b_ReadType) { + + case APCI1710_SSI_READ1VALUE: + /****************************************/ + /* Test the selected SSI counter number */ + /****************************************/ + + if (b_SelectedSSI < 3) { + /************************/ + /* Start the conversion */ + /************************/ + + outl(0, devpriv->s_BoardInfos. + ui_Address + 8 + + (64 * b_ModulNbr)); + + do { + /*******************/ + /* Read the status */ + /*******************/ + + dw_StatusReg = + inl(devpriv-> + s_BoardInfos. + ui_Address + + (64 * b_ModulNbr)); + } + while ((dw_StatusReg & 0x1) != + 0); + + /******************************/ + /* Read the SSI counter value */ + /******************************/ + + dw_CounterValue = + inl(devpriv-> + s_BoardInfos. + ui_Address + 4 + + (b_SelectedSSI * 4) + + (64 * b_ModulNbr)); + + b_Length = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SSICounterInfo. + b_SSIProfile / 2; + + if ((b_Length * 2) != + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SSICounterInfo. + b_SSIProfile) { + b_Length++; + } + + b_Schift = + b_Length - + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SSICounterInfo. + b_PositionTurnLength; + + *pul_Position1 = + dw_CounterValue >> + b_Schift; + + dw_And = 1; + + for (b_Cpt = 0; + b_Cpt < + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SSICounterInfo. + b_PositionTurnLength; + b_Cpt++) { + dw_And = dw_And * 2; + } + + *pul_Position1 = + *pul_Position1 & + ((dw_And) - 1); + + *pul_TurnCpt1 = + dw_CounterValue >> + b_Length; + + dw_And = 1; + + for (b_Cpt = 0; + b_Cpt < + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SSICounterInfo. + b_TurnCptLength; + b_Cpt++) { + dw_And = dw_And * 2; + } + + *pul_TurnCpt1 = + *pul_TurnCpt1 & + ((dw_And) - 1); + } else { + /*****************************/ + /* The selected SSI is wrong */ + /*****************************/ + + DPRINTK("The selected SSI is wrong\n"); + i_ReturnValue = -5; + } + break; + + case APCI1710_SSI_READALLVALUE: + dw_And1 = 1; + + for (b_Cpt = 0; + b_Cpt < + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SSICounterInfo. + b_PositionTurnLength; b_Cpt++) { + dw_And1 = dw_And1 * 2; + } + + dw_And2 = 1; + + for (b_Cpt = 0; + b_Cpt < + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_SSICounterInfo. + b_TurnCptLength; b_Cpt++) { + dw_And2 = dw_And2 * 2; + } + + /************************/ + /* Start the conversion */ + /************************/ + + outl(0, devpriv->s_BoardInfos. + ui_Address + 8 + + (64 * b_ModulNbr)); + + do { + /*******************/ + /* Read the status */ + /*******************/ + + dw_StatusReg = + inl(devpriv-> + s_BoardInfos. + ui_Address + + (64 * b_ModulNbr)); + } + while ((dw_StatusReg & 0x1) != 0); + + for (b_SSICpt = 0; b_SSICpt < 3; + b_SSICpt++) { + /******************************/ + /* Read the SSI counter value */ + /******************************/ + + dw_CounterValue = + inl(devpriv-> + s_BoardInfos. + ui_Address + 4 + + (b_SSICpt * 4) + + (64 * b_ModulNbr)); + + b_Length = + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SSICounterInfo. + b_SSIProfile / 2; + + if ((b_Length * 2) != + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SSICounterInfo. + b_SSIProfile) { + b_Length++; + } + + b_Schift = + b_Length - + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_SSICounterInfo. + b_PositionTurnLength; + + pul_Position[b_SSICpt] = + dw_CounterValue >> + b_Schift; + pul_Position[b_SSICpt] = + pul_Position[b_SSICpt] & + ((dw_And1) - 1); + + pul_TurnCpt[b_SSICpt] = + dw_CounterValue >> + b_Length; + pul_TurnCpt[b_SSICpt] = + pul_TurnCpt[b_SSICpt] & + ((dw_And2) - 1); + } + break; + + default: + printk("Read Type Inputs Wrong\n"); + + } // switch ending + + } else { + /***********************/ + /* SSI not initialised */ + /***********************/ + + DPRINTK("SSI not initialised\n"); + i_ReturnValue = -4; + } + } else { + /**********************************/ + /* The module is not a SSI module */ + /**********************************/ + + DPRINTK("The module is not a SSI module\n"); + i_ReturnValue = -3; + + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_ReadSSI1DigitalInput | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_InputChannel, | +| PBYTE_ pb_ChannelStatus) | ++----------------------------------------------------------------------------+ +| Task : + (0) Set the digital output from selected SSI moule | +| (b_ModuleNbr) ON + (1) Set the digital output from selected SSI moule | +| (b_ModuleNbr) OFF + (2)Read the status from selected SSI digital input | +| (b_InputChannel) + (3)Read the status from all SSI digital inputs from | +| selected SSI module (b_ModulNbr) | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710| +| BYTE_ b_ModulNbr CR_AREF : Module number to | +| configure (0 to 3) | +| BYTE_ b_InputChannel CR_CHAN : Selection from digital | +| data[0] which IOTYPE input ( 0 to 2) | ++----------------------------------------------------------------------------+ +| Output Parameters : PBYTE_ pb_ChannelStatus : Digital input channel | +| data[0] status | +| 0 : Channle is not active| +| 1 : Channle is active | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: The module parameter is wrong | +| -3: The module is not a SSI module | +| -4: The selected SSI digital input is wrong | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnBitsSSIDigitalIO(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = 0; + DWORD dw_StatusReg; + BYTE b_ModulNbr; + BYTE b_InputChannel; + PBYTE pb_ChannelStatus; + PBYTE pb_InputStatus; + BYTE b_IOType; + i_ReturnValue = insn->n; + b_ModulNbr = (BYTE) CR_AREF(insn->chanspec); + b_IOType = (BYTE) data[0]; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /***********************/ + /* Test if SSI counter */ + /***********************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_SSI_COUNTER) { + switch (b_IOType) { + case APCI1710_SSI_SET_CHANNELON: + /*****************************/ + /* Set the digital output ON */ + /*****************************/ + + outl(1, devpriv->s_BoardInfos.ui_Address + 16 + + (64 * b_ModulNbr)); + break; + + case APCI1710_SSI_SET_CHANNELOFF: + /******************************/ + /* Set the digital output OFF */ + /******************************/ + + outl(0, devpriv->s_BoardInfos.ui_Address + 16 + + (64 * b_ModulNbr)); + break; + + case APCI1710_SSI_READ_1CHANNEL: + /******************************************/ + /* Test the digital imnput channel number */ + /******************************************/ + + b_InputChannel = (BYTE) CR_CHAN(insn->chanspec); + pb_ChannelStatus = (PBYTE) & data[0]; + + if (b_InputChannel <= 2) { + /**************************/ + /* Read all digital input */ + /**************************/ + + dw_StatusReg = + inl(devpriv->s_BoardInfos. + ui_Address + (64 * b_ModulNbr)); + *pb_ChannelStatus = + (BYTE) (((~dw_StatusReg) >> (4 + + b_InputChannel)) + & 1); + } else { + /********************************/ + /* Selected digital input error */ + /********************************/ + + DPRINTK("Selected digital input error\n"); + i_ReturnValue = -4; + } + break; + + case APCI1710_SSI_READ_ALLCHANNEL: + /**************************/ + /* Read all digital input */ + /**************************/ + pb_InputStatus = (PBYTE) & data[0]; + + dw_StatusReg = + inl(devpriv->s_BoardInfos.ui_Address + + (64 * b_ModulNbr)); + *pb_InputStatus = + (BYTE) (((~dw_StatusReg) >> 4) & 7); + break; + + default: + printk("IO type wrong\n"); + + } //switch end + } else { + /**********************************/ + /* The module is not a SSI module */ + /**********************************/ + + DPRINTK("The module is not a SSI module\n"); + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.h @@ -0,0 +1,52 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ + +#define APCI1710_30MHZ 30 +#define APCI1710_33MHZ 33 +#define APCI1710_40MHZ 40 + +#define APCI1710_BINARY_MODE 0x1 +#define APCI1710_GRAY_MODE 0x0 + +#define APCI1710_SSI_READ1VALUE 1 +#define APCI1710_SSI_READALLVALUE 2 + +#define APCI1710_SSI_SET_CHANNELON 0 +#define APCI1710_SSI_SET_CHANNELOFF 1 +#define APCI1710_SSI_READ_1CHANNEL 2 +#define APCI1710_SSI_READ_ALLCHANNEL 3 + +/* ++----------------------------------------------------------------------------+ +| SSI INISIALISATION FUNCTION | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI1710_InsnConfigInitSSI(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +INT i_APCI1710_InsnReadSSIValue(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +INT i_APCI1710_InsnBitsSSIDigitalIO(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.c @@ -0,0 +1,2049 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-----------------------------------------------------------------------+ + | Project : API APCI1710 | Compiler : gcc | + | Module name : TOR.C | Version : 2.96 | + +-------------------------------+---------------------------------------+ + | Project manager: Eric Stolz | Date : 02/12/2002 | + +-----------------------------------------------------------------------+ + | Description : APCI-1710 tor counter module | + | | + | | + +-----------------------------------------------------------------------+ + | UPDATES | + +-----------------------------------------------------------------------+ + | Date | Author | Description of updates | + +----------+-----------+------------------------------------------------+ + | 27/01/99 | S. Weber | 40 MHz implementation | + +-----------------------------------------------------------------------+ + | 28/04/00 | S. Weber | Simple,double and quadruple mode implementation| + | | | Extern clock implementation | + +-----------------------------------------------------------------------+ + | 08/05/00 | Guinot C | - 0400/0228 All Function in RING 0 | + | | | available | + +-----------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Included files | ++----------------------------------------------------------------------------+ +*/ + +#include "APCI1710_Tor.h" + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_InitTorCounter | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_TorCounter, | +| BYTE_ b_PCIInputClock, | +| BYTE_ b_TimingUnit, | +| ULONG_ ul_TimingInterval, | +| PULONG_ pul_RealTimingInterval) | ++----------------------------------------------------------------------------+ +| Task : Configure the selected tor counter (b_TorCounter) | +| from selected module (b_ModulNbr). | +| The ul_TimingInterval and ul_TimingUnit determine the | +| timing base for the measurement. | +| The pul_RealTimingInterval return the real timing | +| value. You must calling this function be for you call | +| any other function witch access of the tor counter. | +| | ++----------------------------------------------------------------------------+ +| Input Parameters : | +| + CR_AREF BYTE_ b_ModulNbr : Module number to configure | +| (0 to 3) | +| data[0] BYTE_ b_TorCounter : Tor counter selection | +| (0 or 1). | +| data[1] BYTE_ b_PCIInputClock : Selection from PCI bus clock| +| - APCI1710_30MHZ : | +| The PC have a PCI bus | +| clock from 30 MHz | +| - APCI1710_33MHZ : | +| The PC have a PCI bus | +| clock from 33 MHz | +| - APCI1710_40MHZ | +| The APCI-1710 have a | +| integrated 40Mhz | +| quartz. | +| - APCI1710_GATE_INPUT | +| Used the gate input for | +| the base clock. If you | +| have selected this option,| +| than it is not possibl to | +| used the gate input for | +| enabled the acquisition | +| data[2] BYTE_ b_TimingUnit : Base timing unit (0 to 4) | +| 0 : ns | +| 1 : µs | +| 2 : ms | +| 3 : s | +| 4 : mn | +| data[3] ULONG_ ul_TimingInterval : Base timing value. | ++----------------------------------------------------------------------------+ +| Output Parameters : PULONG_ pul_RealTimingInterval : Real base timing | +| data[0] value. | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection wrong | +| -3: The module is not a tor counter module | +| -4: Tor counter selection is wrong | +| -5: The selected PCI input clock is wrong | +| -6: Timing unit selection is wrong | +| -7: Base timing selection is wrong | +| -8: You can not used the 40MHz clock selection wich | +| this board | +| -9: You can not used the 40MHz clock selection wich | +| this TOR version | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnConfigInitTorCounter(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = 0; + ULONG ul_TimerValue = 0; + DWORD dw_Command; + double d_RealTimingInterval = 0; + BYTE b_ModulNbr; + BYTE b_TorCounter; + BYTE b_PCIInputClock; + BYTE b_TimingUnit; + ULONG ul_TimingInterval; + ULONG ul_RealTimingInterval = 0; + + i_ReturnValue = insn->n; + b_ModulNbr = (BYTE) CR_AREF(insn->chanspec); + + b_TorCounter = (BYTE) data[0]; + b_PCIInputClock = (BYTE) data[1]; + b_TimingUnit = (BYTE) data[2]; + ul_TimingInterval = (ULONG) data[3]; + printk("INPUT clock %d\n", b_PCIInputClock); + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /***********************/ + /* Test if tor counter */ + /***********************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_TOR_COUNTER) { + /**********************************/ + /* Test the tor counter selection */ + /**********************************/ + + if (b_TorCounter <= 1) { + /**************************/ + /* Test the PCI bus clock */ + /**************************/ + + if ((b_PCIInputClock == APCI1710_30MHZ) || + (b_PCIInputClock == APCI1710_33MHZ) || + (b_PCIInputClock == APCI1710_40MHZ) || + (b_PCIInputClock == + APCI1710_GATE_INPUT)) { + /************************/ + /* Test the timing unit */ + /************************/ + + if ((b_TimingUnit <= 4) + || (b_PCIInputClock == + APCI1710_GATE_INPUT)) { + /**********************************/ + /* Test the base timing selection */ + /**********************************/ + + if (((b_PCIInputClock == APCI1710_30MHZ) && (b_TimingUnit == 0) && (ul_TimingInterval >= 133) && (ul_TimingInterval <= 0xFFFFFFFFUL)) || ((b_PCIInputClock == APCI1710_30MHZ) && (b_TimingUnit == 1) && (ul_TimingInterval >= 1) && (ul_TimingInterval <= 571230650UL)) || ((b_PCIInputClock == APCI1710_30MHZ) && (b_TimingUnit == 2) && (ul_TimingInterval >= 1) && (ul_TimingInterval <= 571230UL)) || ((b_PCIInputClock == APCI1710_30MHZ) && (b_TimingUnit == 3) && (ul_TimingInterval >= 1) && (ul_TimingInterval <= 571UL)) || ((b_PCIInputClock == APCI1710_30MHZ) && (b_TimingUnit == 4) && (ul_TimingInterval >= 1) && (ul_TimingInterval <= 9UL)) || ((b_PCIInputClock == APCI1710_33MHZ) && (b_TimingUnit == 0) && (ul_TimingInterval >= 121) && (ul_TimingInterval <= 0xFFFFFFFFUL)) || ((b_PCIInputClock == APCI1710_33MHZ) && (b_TimingUnit == 1) && (ul_TimingInterval >= 1) && (ul_TimingInterval <= 519691043UL)) || ((b_PCIInputClock == APCI1710_33MHZ) && (b_TimingUnit == 2) && (ul_TimingInterval >= 1) && (ul_TimingInterval <= 519691UL)) || ((b_PCIInputClock == APCI1710_33MHZ) && (b_TimingUnit == 3) && (ul_TimingInterval >= 1) && (ul_TimingInterval <= 520UL)) || ((b_PCIInputClock == APCI1710_33MHZ) && (b_TimingUnit == 4) && (ul_TimingInterval >= 1) && (ul_TimingInterval <= 8UL)) || ((b_PCIInputClock == APCI1710_40MHZ) && (b_TimingUnit == 0) && (ul_TimingInterval >= 100) && (ul_TimingInterval <= 0xFFFFFFFFUL)) || ((b_PCIInputClock == APCI1710_40MHZ) && (b_TimingUnit == 1) && (ul_TimingInterval >= 1) && (ul_TimingInterval <= 429496729UL)) || ((b_PCIInputClock == APCI1710_40MHZ) && (b_TimingUnit == 2) && (ul_TimingInterval >= 1) && (ul_TimingInterval <= 429496UL)) || ((b_PCIInputClock == APCI1710_40MHZ) && (b_TimingUnit == 3) && (ul_TimingInterval >= 1) && (ul_TimingInterval <= 429UL)) || ((b_PCIInputClock == APCI1710_40MHZ) && (b_TimingUnit == 4) && (ul_TimingInterval >= 1) && (ul_TimingInterval <= 7UL)) || ((b_PCIInputClock == APCI1710_GATE_INPUT) && (ul_TimingInterval >= 2))) { + /**************************/ + /* Test the board version */ + /**************************/ + + if (((b_PCIInputClock == APCI1710_40MHZ) && (devpriv->s_BoardInfos.b_BoardVersion > 0)) || (b_PCIInputClock != APCI1710_40MHZ)) { + /************************/ + /* Test the TOR version */ + /************************/ + + if (((b_PCIInputClock == APCI1710_40MHZ) && ((devpriv->s_BoardInfos.dw_MolduleConfiguration[b_ModulNbr] & 0xFFFF) >= 0x3131)) || ((b_PCIInputClock == APCI1710_GATE_INPUT) && ((devpriv->s_BoardInfos.dw_MolduleConfiguration[b_ModulNbr] & 0xFFFF) >= 0x3132)) || (b_PCIInputClock == APCI1710_30MHZ) || (b_PCIInputClock == APCI1710_33MHZ)) { + /*********************************/ + /* Test if not extern clock used */ + /*********************************/ + + if (b_PCIInputClock != APCI1710_GATE_INPUT) { + fpu_begin + (); + /****************************************/ + /* Calculate the timer 0 division fator */ + /****************************************/ + + switch (b_TimingUnit) { + /******/ + /* ns */ + /******/ + + case 0: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_TimerValue + = + (ULONG) + (ul_TimingInterval + * + (0.00025 * b_PCIInputClock)); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_TimingInterval * (0.00025 * (double)b_PCIInputClock)) >= ((double)((double)ul_TimerValue + 0.5))) { + ul_TimerValue + = + ul_TimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + ul_RealTimingInterval + = + (ULONG) + (ul_TimerValue + / + (0.00025 * (double)b_PCIInputClock)); + d_RealTimingInterval + = + (double) + ul_TimerValue + / + (0.00025 + * + (double) + b_PCIInputClock); + + if ((double)((double)ul_TimerValue / (0.00025 * (double)b_PCIInputClock)) >= (double)((double)ul_RealTimingInterval + 0.5)) { + ul_RealTimingInterval + = + ul_RealTimingInterval + + + 1; + } + + ul_TimingInterval + = + ul_TimingInterval + - + 1; + ul_TimerValue + = + ul_TimerValue + - + 2; + + if (b_PCIInputClock != APCI1710_40MHZ) { + ul_TimerValue + = + (ULONG) + ( + (double) + (ul_TimerValue) + * + 1.007752288); + } + + break; + + /******/ + /* æs */ + /******/ + + case 1: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_TimerValue + = + (ULONG) + (ul_TimingInterval + * + (0.25 * b_PCIInputClock)); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_TimingInterval * (0.25 * (double)b_PCIInputClock)) >= ((double)((double)ul_TimerValue + 0.5))) { + ul_TimerValue + = + ul_TimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + ul_RealTimingInterval + = + (ULONG) + (ul_TimerValue + / + (0.25 * (double)b_PCIInputClock)); + d_RealTimingInterval + = + (double) + ul_TimerValue + / + ( + (double) + 0.25 + * + (double) + b_PCIInputClock); + + if ((double)((double)ul_TimerValue / (0.25 * (double)b_PCIInputClock)) >= (double)((double)ul_RealTimingInterval + 0.5)) { + ul_RealTimingInterval + = + ul_RealTimingInterval + + + 1; + } + + ul_TimingInterval + = + ul_TimingInterval + - + 1; + ul_TimerValue + = + ul_TimerValue + - + 2; + + if (b_PCIInputClock != APCI1710_40MHZ) { + ul_TimerValue + = + (ULONG) + ( + (double) + (ul_TimerValue) + * + 1.007752288); + } + + break; + + /******/ + /* ms */ + /******/ + + case 2: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_TimerValue + = + ul_TimingInterval + * + (250.0 + * + b_PCIInputClock); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_TimingInterval * (250.0 * (double)b_PCIInputClock)) >= ((double)((double)ul_TimerValue + 0.5))) { + ul_TimerValue + = + ul_TimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + ul_RealTimingInterval + = + (ULONG) + (ul_TimerValue + / + (250.0 * (double)b_PCIInputClock)); + d_RealTimingInterval + = + (double) + ul_TimerValue + / + (250.0 + * + (double) + b_PCIInputClock); + + if ((double)((double)ul_TimerValue / (250.0 * (double)b_PCIInputClock)) >= (double)((double)ul_RealTimingInterval + 0.5)) { + ul_RealTimingInterval + = + ul_RealTimingInterval + + + 1; + } + + ul_TimingInterval + = + ul_TimingInterval + - + 1; + ul_TimerValue + = + ul_TimerValue + - + 2; + + if (b_PCIInputClock != APCI1710_40MHZ) { + ul_TimerValue + = + (ULONG) + ( + (double) + (ul_TimerValue) + * + 1.007752288); + } + + break; + + /*****/ + /* s */ + /*****/ + + case 3: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_TimerValue + = + (ULONG) + (ul_TimingInterval + * + (250000.0 + * + b_PCIInputClock)); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)ul_TimingInterval * (250000.0 * (double)b_PCIInputClock)) >= ((double)((double)ul_TimerValue + 0.5))) { + ul_TimerValue + = + ul_TimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + ul_RealTimingInterval + = + (ULONG) + (ul_TimerValue + / + (250000.0 + * + (double) + b_PCIInputClock)); + d_RealTimingInterval + = + (double) + ul_TimerValue + / + (250000.0 + * + (double) + b_PCIInputClock); + + if ((double)((double)ul_TimerValue / (250000.0 * (double)b_PCIInputClock)) >= (double)((double)ul_RealTimingInterval + 0.5)) { + ul_RealTimingInterval + = + ul_RealTimingInterval + + + 1; + } + + ul_TimingInterval + = + ul_TimingInterval + - + 1; + ul_TimerValue + = + ul_TimerValue + - + 2; + + if (b_PCIInputClock != APCI1710_40MHZ) { + ul_TimerValue + = + (ULONG) + ( + (double) + (ul_TimerValue) + * + 1.007752288); + } + + break; + + /******/ + /* mn */ + /******/ + + case 4: + + /******************/ + /* Timer 0 factor */ + /******************/ + + ul_TimerValue + = + (ULONG) + ( + (ul_TimingInterval + * + 60) + * + (250000.0 + * + b_PCIInputClock)); + + /*******************/ + /* Round the value */ + /*******************/ + + if ((double)((double)(ul_TimingInterval * 60.0) * (250000.0 * (double)b_PCIInputClock)) >= ((double)((double)ul_TimerValue + 0.5))) { + ul_TimerValue + = + ul_TimerValue + + + 1; + } + + /*****************************/ + /* Calculate the real timing */ + /*****************************/ + + ul_RealTimingInterval + = + (ULONG) + (ul_TimerValue + / + (250000.0 + * + (double) + b_PCIInputClock)) + / + 60; + d_RealTimingInterval + = + ( + (double) + ul_TimerValue + / + (250000.0 + * + (double) + b_PCIInputClock)) + / + 60.0; + + if ((double)(((double)ul_TimerValue / (250000.0 * (double)b_PCIInputClock)) / 60.0) >= (double)((double)ul_RealTimingInterval + 0.5)) { + ul_RealTimingInterval + = + ul_RealTimingInterval + + + 1; + } + + ul_TimingInterval + = + ul_TimingInterval + - + 1; + ul_TimerValue + = + ul_TimerValue + - + 2; + + if (b_PCIInputClock != APCI1710_40MHZ) { + ul_TimerValue + = + (ULONG) + ( + (double) + (ul_TimerValue) + * + 1.007752288); + } + + break; + } + + fpu_end(); + } // if (b_PCIInputClock != APCI1710_GATE_INPUT) + else { + /*************************************************************/ + /* 2 Clock used for the overflow and the reload from counter */ + /*************************************************************/ + + ul_TimerValue + = + ul_TimingInterval + - + 2; + } // if (b_PCIInputClock != APCI1710_GATE_INPUT) + + /****************************/ + /* Save the PCI input clock */ + /****************************/ + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_TorCounterModuleInfo. + b_PCIInputClock + = + b_PCIInputClock; + + /************************/ + /* Save the timing unit */ + /************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_TorCounterModuleInfo. + s_TorCounterInfo + [b_TorCounter]. + b_TimingUnit + = + b_TimingUnit; + + /************************/ + /* Save the base timing */ + /************************/ + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_TorCounterModuleInfo. + s_TorCounterInfo + [b_TorCounter]. + d_TimingInterval + = + d_RealTimingInterval; + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_TorCounterModuleInfo. + s_TorCounterInfo + [b_TorCounter]. + ul_RealTimingInterval + = + ul_RealTimingInterval; + + /*******************/ + /* Get the command */ + /*******************/ + + dw_Command + = + inl + (devpriv-> + s_BoardInfos. + ui_Address + + + 4 + + + (16 * b_TorCounter) + (64 * b_ModulNbr)); + + dw_Command + = + (dw_Command + >> + 4) + & + 0xF; + + /******************/ + /* Test if 40 MHz */ + /******************/ + + if (b_PCIInputClock == APCI1710_40MHZ) { + /****************************/ + /* Set the 40 MHz selection */ + /****************************/ + + dw_Command + = + dw_Command + | + 0x10; + } + + /*****************************/ + /* Test if extern clock used */ + /*****************************/ + + if (b_PCIInputClock == APCI1710_GATE_INPUT) { + /****************************/ + /* Set the 40 MHz selection */ + /****************************/ + + dw_Command + = + dw_Command + | + 0x20; + } + + /*************************/ + /* Write the new command */ + /*************************/ + + outl(dw_Command, devpriv->s_BoardInfos.ui_Address + 4 + (16 * b_TorCounter) + (64 * b_ModulNbr)); + + /*******************/ + /* Disable the tor */ + /*******************/ + + outl(0, devpriv->s_BoardInfos.ui_Address + 8 + (16 * b_TorCounter) + (64 * b_ModulNbr)); + /*************************/ + /* Set the timer 1 value */ + /*************************/ + + outl(ul_TimerValue, devpriv->s_BoardInfos.ui_Address + 0 + (16 * b_TorCounter) + (64 * b_ModulNbr)); + + /*********************/ + /* Tor counter init. */ + /*********************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_TorCounterModuleInfo. + s_TorCounterInfo + [b_TorCounter]. + b_TorCounterInit + = + 1; + } else { + /***********************************************/ + /* TOR version error for 40MHz clock selection */ + /***********************************************/ + + DPRINTK("TOR version error for 40MHz clock selection\n"); + i_ReturnValue + = + -9; + } + } else { + /**************************************************************/ + /* You can not used the 40MHz clock selection wich this board */ + /**************************************************************/ + + DPRINTK("You can not used the 40MHz clock selection wich this board\n"); + i_ReturnValue = + -8; + } + } else { + /**********************************/ + /* Base timing selection is wrong */ + /**********************************/ + + DPRINTK("Base timing selection is wrong\n"); + i_ReturnValue = -7; + } + } // if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) + else { + /**********************************/ + /* Timing unit selection is wrong */ + /**********************************/ + + DPRINTK("Timing unit selection is wrong\n"); + i_ReturnValue = -6; + } // if ((b_TimingUnit >= 0) && (b_TimingUnit <= 4)) + } // if ((b_PCIInputClock == APCI1710_30MHZ) || (b_PCIInputClock == APCI1710_33MHZ)) + else { + /*****************************************/ + /* The selected PCI input clock is wrong */ + /*****************************************/ + + DPRINTK("The selected PCI input clock is wrong\n"); + i_ReturnValue = -5; + } // if ((b_PCIInputClock == APCI1710_30MHZ) || (b_PCIInputClock == APCI1710_33MHZ)) + } // if (b_TorCounterMode >= 0 && b_TorCounterMode <= 7) + else { + /**********************************/ + /* Tor Counter selection is wrong */ + /**********************************/ + + DPRINTK("Tor Counter selection is wrong\n"); + i_ReturnValue = -4; + } // if (b_TorCounterMode >= 0 && b_TorCounterMode <= 7) + } else { + /******************************************/ + /* The module is not a tor counter module */ + /******************************************/ + + DPRINTK("The module is not a tor counter module\n"); + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + data[0] = (UINT) ul_RealTimingInterval; + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_EnableTorCounter | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_TorCounter, | +| BYTE_ b_InputMode, | +| BYTE_ b_ExternGate, | +| BYTE_ b_CycleMode, | +| BYTE_ b_InterruptEnable) | ++----------------------------------------------------------------------------+ +| Task : Enable the tor counter (b_TorCounter) from selected | +| module (b_ModulNbr). You must calling the | +| "i_APCI1710_InitTorCounter" function be for you call | +| this function. | +| If you enable the tor counter interrupt, the | +| tor counter generate a interrupt after the timing cycle| +| See function "i_APCI1710_SetBoardIntRoutineX" and the | +| Interrupt mask description chapter from this manual. | +| The b_CycleMode parameter determine if you will | +| measured a single or more cycle. | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Selected module number (0 to 3) | +| BYTE_ b_TorCounter : Tor counter selection (0 or 1). | +| BYTE_ b_InputMode : Input signal level selection | +| 0 : Tor count each low level | +| 1 : Tor count each high level| +| BYTE_ b_ExternGate : Extern gate action selection | +| 0 : Extern gate signal not | +| used | +| 1 : Extern gate signal used. | +| If you selected the | +| single mode, each high | +| level signal start the | +| counter. | +| If you selected the | +| continuous mode, the | +| first high level signal | +| start the tor counter | +| | +| APCI1710_TOR_QUADRUPLE _MODE : | +| In the quadruple mode, the edge| +| analysis circuit generates a | +| counting pulse from each edge | +| of 2 signals which are phase | +| shifted in relation to each | +| other. | +| The gate input is used for the | +| signal B | +| | +| APCI1710_TOR_DOUBLE_MODE: | +| Functions in the same way as | +| the quadruple mode, except that| +| only two of the four edges are | +| analysed per period. | +| The gate input is used for the | +| signal B | +| | +| APCI1710_TOR_SIMPLE_MODE: | +| Functions in the same way as | +| the quadruple mode, except that| +| only one of the four edges is | +| analysed per period. | +| The gate input is used for the | +| signal B | +| | +| BYTE_ b_CycleMode : Selected the tor counter | +| acquisition mode | +| BYTE_ b_InterruptEnable : Enable or disable the | +| tor counter interrupt. | +| APCI1710_ENABLE: | +| Enable the tor counter | +| interrupt | +| APCI1710_DISABLE: | +| Disable the tor counter | +| interrupt | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection wrong | +| -3: The module is not a tor counter module | +| -4: Tor counter selection is wrong | +| -5: Tor counter not initialised see function | +| "i_APCI1710_InitTorCounter" | +| -6: Tor input signal selection is wrong | +| -7: Extern gate signal mode is wrong | +| -8: Tor counter acquisition mode cycle is wrong | +| -9: Interrupt parameter is wrong | +| -10:Interrupt function not initialised. | +| See function "i_APCI1710_SetBoardIntRoutineX" | ++----------------------------------------------------------------------------+ +*/ +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_DisableTorCounter | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_TorCounter) | ++----------------------------------------------------------------------------+ +| Task : Disable the tor counter (b_TorCounter) from selected | +| module (b_ModulNbr). If you disable the tor counter | +| after a start cycle occur and you restart the tor | +| counter witch the " i_APCI1710_EnableTorCounter" | +| function, the status register is cleared | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Selected module number (0 to 3) | +| BYTE_ b_TorCounter : Tor counter selection (0 or 1). | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection wrong | +| -3: The module is not a tor counter module | +| -4: Tor counter selection is wrong | +| -5: Tor counter not initialised see function | +| "i_APCI1710_InitTorCounter" | +| -6: Tor counter not enabled see function | +| "i_APCI1710_EnableTorCounter" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnWriteEnableDisableTorCounter(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = 0; + DWORD dw_Status; + DWORD dw_DummyRead; + DWORD dw_ConfigReg; + BYTE b_ModulNbr, b_Action; + BYTE b_TorCounter; + BYTE b_InputMode; + BYTE b_ExternGate; + BYTE b_CycleMode; + BYTE b_InterruptEnable; + + b_ModulNbr = (BYTE) CR_AREF(insn->chanspec); + b_Action = (BYTE) data[0]; // enable or disable + b_TorCounter = (BYTE) data[1]; + b_InputMode = (BYTE) data[2]; + b_ExternGate = (BYTE) data[3]; + b_CycleMode = (BYTE) data[4]; + b_InterruptEnable = (BYTE) data[5]; + i_ReturnValue = insn->n;; + devpriv->tsk_Current = current; // Save the current process task structure + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /***********************/ + /* Test if tor counter */ + /***********************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_TOR_COUNTER) { + /**********************************/ + /* Test the tor counter selection */ + /**********************************/ + + if (b_TorCounter <= 1) { + switch (b_Action) // Enable or Disable + { + case APCI1710_ENABLE: + /***********************************/ + /* Test if tor counter initialised */ + /***********************************/ + + dw_Status = + inl(devpriv->s_BoardInfos. + ui_Address + 8 + + (16 * b_TorCounter) + + (64 * b_ModulNbr)); + + if (dw_Status & 0x10) { + /******************************/ + /* Test the input signal mode */ + /******************************/ + + if (b_InputMode == 0 || + b_InputMode == 1 || + b_InputMode == + APCI1710_TOR_SIMPLE_MODE + || b_InputMode == + APCI1710_TOR_DOUBLE_MODE + || b_InputMode == + APCI1710_TOR_QUADRUPLE_MODE) + { + /************************************/ + /* Test the extern gate signal mode */ + /************************************/ + + if (b_ExternGate == 0 + || b_ExternGate + == 1 + || b_InputMode > + 1) { + /*********************************/ + /* Test the cycle mode parameter */ + /*********************************/ + + if ((b_CycleMode == APCI1710_SINGLE) || (b_CycleMode == APCI1710_CONTINUOUS)) { + /***************************/ + /* Test the interrupt flag */ + /***************************/ + + if ((b_InterruptEnable == APCI1710_ENABLE) || (b_InterruptEnable == APCI1710_DISABLE)) { + + /***************************/ + /* Save the interrupt mode */ + /***************************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_TorCounterModuleInfo. + s_TorCounterInfo + [b_TorCounter]. + b_InterruptEnable + = + b_InterruptEnable; + + /*******************/ + /* Get the command */ + /*******************/ + + dw_ConfigReg + = + inl + (devpriv-> + s_BoardInfos. + ui_Address + + + 4 + + + (16 * b_TorCounter) + (64 * b_ModulNbr)); + + dw_ConfigReg + = + (dw_ConfigReg + >> + 4) + & + 0x30; + + /********************************/ + /* Test if not direct mode used */ + /********************************/ + + if (b_InputMode > 1) { + /*******************************/ + /* Extern gate can not be used */ + /*******************************/ + + b_ExternGate + = + 0; + + /*******************************************/ + /* Enable the extern gate for the Signal B */ + /*******************************************/ + + dw_ConfigReg + = + dw_ConfigReg + | + 0x40; + + /***********************/ + /* Test if simple mode */ + /***********************/ + + if (b_InputMode == APCI1710_TOR_SIMPLE_MODE) { + /**************************/ + /* Enable the sinple mode */ + /**************************/ + + dw_ConfigReg + = + dw_ConfigReg + | + 0x780; + + } // if (b_InputMode == APCI1710_TOR_SIMPLE_MODE) + + /***********************/ + /* Test if double mode */ + /***********************/ + + if (b_InputMode == APCI1710_TOR_DOUBLE_MODE) { + /**************************/ + /* Enable the double mode */ + /**************************/ + + dw_ConfigReg + = + dw_ConfigReg + | + 0x180; + + } // if (b_InputMode == APCI1710_TOR_DOUBLE_MODE) + + b_InputMode + = + 0; + } // if (b_InputMode > 1) + + /*******************/ + /* Set the command */ + /*******************/ + + dw_ConfigReg + = + dw_ConfigReg + | + b_CycleMode + | + (b_InterruptEnable + * + 2) + | + (b_InputMode + * + 4) + | + (b_ExternGate + * + 8); + + /*****************************/ + /* Clear the status register */ + /*****************************/ + + dw_DummyRead + = + inl + (devpriv-> + s_BoardInfos. + ui_Address + + + 0 + + + (16 * b_TorCounter) + (64 * b_ModulNbr)); + + /***************************************/ + /* Clear the interrupt status register */ + /***************************************/ + + dw_DummyRead + = + inl + (devpriv-> + s_BoardInfos. + ui_Address + + + 12 + + + (16 * b_TorCounter) + (64 * b_ModulNbr)); + + /********************/ + /* Set the commando */ + /********************/ + + outl(dw_ConfigReg, devpriv->s_BoardInfos.ui_Address + 4 + (16 * b_TorCounter) + (64 * b_ModulNbr)); + + /****************/ + /* Set the gate */ + /****************/ + + outl(1, devpriv->s_BoardInfos.ui_Address + 8 + (16 * b_TorCounter) + (64 * b_ModulNbr)); + + } // if ((b_InterruptEnable == APCI1710_ENABLE) || (b_InterruptEnable == APCI1710_DISABLE)) + else { + /********************************/ + /* Interrupt parameter is wrong */ + /********************************/ + + DPRINTK("Interrupt parameter is wrong\n"); + i_ReturnValue + = + -9; + } // if ((b_InterruptEnable == APCI1710_ENABLE) || (b_InterruptEnable == APCI1710_DISABLE)) + } // if ((b_CycleMode == APCI1710_SINGLE) || (b_CycleMode == APCI1710_CONTINUOUS)) + else { + /***********************************************/ + /* Tor counter acquisition mode cycle is wrong */ + /***********************************************/ + + DPRINTK("Tor counter acquisition mode cycle is wrong\n"); + i_ReturnValue + = + -8; + } // if ((b_CycleMode == APCI1710_SINGLE) || (b_CycleMode == APCI1710_CONTINUOUS)) + } // if (b_ExternGate >= 0 && b_ExternGate <= 1) + else { + /***********************************/ + /* Extern gate input mode is wrong */ + /***********************************/ + + DPRINTK("Extern gate input mode is wrong\n"); + i_ReturnValue = + -7; + } // if (b_ExternGate >= 0 && b_ExternGate <= 1) + } // if (b_InputMode >= 0 && b_InputMode <= 1) + else { + /***************************************/ + /* Tor input signal selection is wrong */ + /***************************************/ + + DPRINTK("Tor input signal selection is wrong\n"); + i_ReturnValue = -6; + } + } else { + /*******************************/ + /* Tor counter not initialised */ + /*******************************/ + + DPRINTK("Tor counter not initialised\n"); + i_ReturnValue = -5; + } + break; + + case APCI1710_DISABLE: + /***********************************/ + /* Test if tor counter initialised */ + /***********************************/ + + dw_Status = inl(devpriv->s_BoardInfos. + ui_Address + 8 + + (16 * b_TorCounter) + + (64 * b_ModulNbr)); + + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (dw_Status & 0x10) { + /***************************/ + /* Test if counter enabled */ + /***************************/ + + if (dw_Status & 0x1) { + /****************************/ + /* Clear the interrupt mode */ + /****************************/ + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_TorCounterModuleInfo. + s_TorCounterInfo + [b_TorCounter]. + b_InterruptEnable + = + APCI1710_DISABLE; + + /******************/ + /* Clear the gate */ + /******************/ + + outl(0, devpriv-> + s_BoardInfos. + ui_Address + 8 + + (16 * b_TorCounter) + (64 * b_ModulNbr)); + } // if (dw_Status & 0x1) + else { + /***************************/ + /* Tor counter not enabled */ + /***************************/ + + DPRINTK("Tor counter not enabled \n"); + i_ReturnValue = -6; + } // if (dw_Status & 0x1) + } // if (dw_Status & 0x10) + else { + /*******************************/ + /* Tor counter not initialised */ + /*******************************/ + + DPRINTK("Tor counter not initialised\n"); + i_ReturnValue = -5; + } // // if (dw_Status & 0x10) + + } // switch + } // if (b_TorCounter <= 1) + else { + /**********************************/ + /* Tor counter selection is wrong */ + /**********************************/ + + DPRINTK("Tor counter selection is wrong\n"); + i_ReturnValue = -4; + } // if (b_TorCounter <= 1) + } else { + /******************************************/ + /* The module is not a tor counter module */ + /******************************************/ + + DPRINTK("The module is not a tor counter module \n"); + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + + DPRINTK("Module number error \n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_GetTorCounterInitialisation | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_TorCounter, | +| PBYTE_ pb_TimingUnit, | +| PULONG_ pul_TimingInterval, | +| PBYTE_ pb_InputMode, | +| PBYTE_ pb_ExternGate, | +| PBYTE_ pb_CycleMode, | +| PBYTE_ pb_Enable, | +| PBYTE_ pb_InterruptEnable)| ++----------------------------------------------------------------------------+ +| Task : Enable the tor counter (b_TorCounter) from selected | +| module (b_ModulNbr). You must calling the | +| "i_APCI1710_InitTorCounter" function be for you call | +| this function. | +| If you enable the tor counter interrupt, the | +| tor counter generate a interrupt after the timing cycle| +| See function "i_APCI1710_SetBoardIntRoutineX" and the | +| Interrupt mask description chapter from this manual. | +| The b_CycleMode parameter determine if you will | +| measured a single or more cycle. | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Selected module number (0 to 3) | +| BYTE_ b_TorCounter : Tor counter selection (0 or 1) + + b_ModulNbr = CR_AREF(insn->chanspec); + b_TorCounter = CR_CHAN(insn->chanspec); +. | ++----------------------------------------------------------------------------+ +| Output Parameters : PBYTE_ pb_TimingUnit : Base timing unit (0 to 4) | +| 0 : ns | +| 1 : µs | +| 2 : ms | +| 3 : s | +| 4 : mn | +| PULONG_ pul_TimingInterval : Base timing value. | +| PBYTE_ pb_InputMode : Input signal level | +| selection | +| 0 : Tor count each low level | +| 1 : Tor count each high level| +| PBYTE_ pb_ExternGate : Extern gate action | +| selection | +| 0 : Extern gate signal not | +| used | +| 1 : Extern gate signal used| +| PBYTE_ pb_CycleMode : Tor counter acquisition | +| mode | +| PBYTE_ pb_Enable : Indicate if the tor counter| +| is enabled or no | +| 0 : Tor counter disabled | +| 1 : Tor counter enabled | +| PBYTE_ pb_InterruptEnable : Enable or disable the | +| tor counter interrupt. | +| APCI1710_ENABLE: | +| Enable the tor counter | +| interrupt | +| APCI1710_DISABLE: | +| Disable the tor counter | +| interrupt + pb_TimingUnit = (PBYTE) &data[0]; + pul_TimingInterval = (PULONG) &data[1]; + pb_InputMode = (PBYTE) &data[2]; + pb_ExternGate = (PBYTE) &data[3]; + pb_CycleMode = (PBYTE) &data[4]; + pb_Enable = (PBYTE) &data[5]; + pb_InterruptEnable = (PBYTE) &data[6]; + | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection wrong | +| -3: The module is not a tor counter module | +| -4: Tor counter selection is wrong | +| -5: Tor counter not initialised see function | +| "i_APCI1710_InitTorCounter" | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnReadGetTorCounterInitialisation(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = 0; + DWORD dw_Status; + BYTE b_ModulNbr; + BYTE b_TorCounter; + PBYTE pb_TimingUnit; + PULONG pul_TimingInterval; + PBYTE pb_InputMode; + PBYTE pb_ExternGate; + PBYTE pb_CycleMode; + PBYTE pb_Enable; + PBYTE pb_InterruptEnable; + + i_ReturnValue = insn->n; + b_ModulNbr = CR_AREF(insn->chanspec); + b_TorCounter = CR_CHAN(insn->chanspec); + + pb_TimingUnit = (PBYTE) & data[0]; + pul_TimingInterval = (PULONG) & data[1]; + pb_InputMode = (PBYTE) & data[2]; + pb_ExternGate = (PBYTE) & data[3]; + pb_CycleMode = (PBYTE) & data[4]; + pb_Enable = (PBYTE) & data[5]; + pb_InterruptEnable = (PBYTE) & data[6]; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /***********************/ + /* Test if tor counter */ + /***********************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_TOR_COUNTER) { + /**********************************/ + /* Test the tor counter selection */ + /**********************************/ + + if (b_TorCounter <= 1) { + + /***********************************/ + /* Test if tor counter initialised */ + /***********************************/ + + dw_Status = inl(devpriv->s_BoardInfos. + ui_Address + 8 + (16 * b_TorCounter) + + (64 * b_ModulNbr)); + + if (dw_Status & 0x10) { + *pb_Enable = dw_Status & 1; + + /********************/ + /* Get the commando */ + /********************/ + + dw_Status = inl(devpriv->s_BoardInfos. + ui_Address + 4 + + (16 * b_TorCounter) + + (64 * b_ModulNbr)); + + *pb_CycleMode = + (BYTE) ((dw_Status >> 4) & 1); + *pb_InterruptEnable = + (BYTE) ((dw_Status >> 5) & 1); + + /******************************************************/ + /* Test if extern gate used for clock or for signal B */ + /******************************************************/ + + if (dw_Status & 0x600) { + /*****************************************/ + /* Test if extern gate used for signal B */ + /*****************************************/ + + if (dw_Status & 0x400) { + /***********************/ + /* Test if simple mode */ + /***********************/ + + if ((dw_Status & 0x7800) + == 0x7800) { + *pb_InputMode = + APCI1710_TOR_SIMPLE_MODE; + } + + /***********************/ + /* Test if double mode */ + /***********************/ + + if ((dw_Status & 0x7800) + == 0x1800) { + *pb_InputMode = + APCI1710_TOR_DOUBLE_MODE; + } + + /**************************/ + /* Test if quadruple mode */ + /**************************/ + + if ((dw_Status & 0x7800) + == 0x0000) { + *pb_InputMode = + APCI1710_TOR_QUADRUPLE_MODE; + } + } // if (dw_Status & 0x400) + else { + *pb_InputMode = 1; + } // // if (dw_Status & 0x400) + + /************************/ + /* Extern gate not used */ + /************************/ + + *pb_ExternGate = 0; + } // if (dw_Status & 0x600) + else { + *pb_InputMode = + (BYTE) ((dw_Status >> 6) + & 1); + *pb_ExternGate = + (BYTE) ((dw_Status >> 7) + & 1); + } // if (dw_Status & 0x600) + + *pb_TimingUnit = + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_TorCounterModuleInfo. + s_TorCounterInfo[b_TorCounter]. + b_TimingUnit; + + *pul_TimingInterval = + devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_TorCounterModuleInfo. + s_TorCounterInfo[b_TorCounter]. + ul_RealTimingInterval; + } else { + /*******************************/ + /* Tor counter not initialised */ + /*******************************/ + + DPRINTK("Tor counter not initialised\n"); + i_ReturnValue = -5; + } + + } // if (b_TorCounter <= 1) + else { + /**********************************/ + /* Tor counter selection is wrong */ + /**********************************/ + + DPRINTK("Tor counter selection is wrong \n"); + i_ReturnValue = -4; + } // if (b_TorCounter <= 1) + } else { + /******************************************/ + /* The module is not a tor counter module */ + /******************************************/ + + DPRINTK("The module is not a tor counter module\n"); + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_ReadTorCounterValue | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_TorCounter, | +| UINT_ ui_TimeOut, | +| PBYTE_ pb_TorCounterStatus, | +| PULONG_ pul_TorCounterValue) | ++----------------------------------------------------------------------------+ +| Task case APCI1710_TOR_GETPROGRESSSTATUS: Return the tor counter +(b_TorCounter) status (pb_TorCounterStatus) from selected tor counter | +| module (b_ModulNbr). + + case APCI1710_TOR_GETCOUNTERVALUE : + Return the tor counter (b_TorCounter) status | +| (pb_TorCounterStatus) and the timing value | +| (pul_TorCounterValue) after a conting cycle stop | +| from selected tor counter module (b_ModulNbr). | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Selected module number (0 to 3) | +| BYTE_ b_TorCounter : Tor counter selection (0 or 1). + b_ModulNbr = CR_AREF(insn->chanspec); + b_ReadType = (BYTE) data[0]; + b_TorCounter = (BYTE) data[1]; + ui_TimeOut = (UINT) data[2]; | ++----------------------------------------------------------------------------+ +| Output Parameters : PBYTE_ pb_TorCounterStatus : Return the tor counter | +| status. | +| 0 : Conting cycle not started| +| Software gate not set. | +| 1 : Conting cycle started. | +| Software gate set. | +| 2 : Conting cycle stopped. | +| The conting cycle is | +| terminate. | +| 3 : A overflow occur. You | +| must change the base | +| timing witch the | +| function | +| "i_APCI1710_InitTorCounter"| +| 4 : Timeeout occur | +| PULONG pul_TorCounterValue : Tor counter value. + pb_TorCounterStatus=(PBYTE) &data[0]; + pul_TorCounterValue=(PULONG) &data[1]; | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: Module selection wrong | +| -3: The module is not a tor counter module | +| -4: Tor counter selection is wrong | +| -5: Tor counter not initialised see function | +| "i_APCI1710_InitTorCounter" | +| -6: Tor counter not enabled see function | +| "i_APCI1710_EnableTorCounter" | +| -7: Timeout parameter is wrong (0 to 65535) | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnBitsGetTorCounterProgressStatusAndValue(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = 0; + DWORD dw_Status; + DWORD dw_TimeOut = 0; + + BYTE b_ModulNbr; + BYTE b_TorCounter; + BYTE b_ReadType; + UINT ui_TimeOut; + PBYTE pb_TorCounterStatus; + PULONG pul_TorCounterValue; + + i_ReturnValue = insn->n; + b_ModulNbr = CR_AREF(insn->chanspec); + b_ReadType = (BYTE) data[0]; + b_TorCounter = (BYTE) data[1]; + ui_TimeOut = (UINT) data[2]; + pb_TorCounterStatus = (PBYTE) & data[0]; + pul_TorCounterValue = (PULONG) & data[1]; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ReadType == APCI1710_TOR_READINTERRUPT) { + + data[0] = devpriv->s_InterruptParameters. + s_FIFOInterruptParameters[devpriv-> + s_InterruptParameters.ui_Read].b_OldModuleMask; + data[1] = devpriv->s_InterruptParameters. + s_FIFOInterruptParameters[devpriv-> + s_InterruptParameters.ui_Read].ul_OldInterruptMask; + data[2] = devpriv->s_InterruptParameters. + s_FIFOInterruptParameters[devpriv-> + s_InterruptParameters.ui_Read].ul_OldCounterLatchValue; + + /**************************/ + /* Increment the read FIFO */ + /***************************/ + + devpriv-> + s_InterruptParameters. + ui_Read = (devpriv-> + s_InterruptParameters. + ui_Read + 1) % APCI1710_SAVE_INTERRUPT; + + return insn->n; + } + + if (b_ModulNbr < 4) { + /***********************/ + /* Test if tor counter */ + /***********************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_TOR_COUNTER) { + /**********************************/ + /* Test the tor counter selection */ + /**********************************/ + + if (b_TorCounter <= 1) { + /***********************************/ + /* Test if tor counter initialised */ + /***********************************/ + + dw_Status = inl(devpriv->s_BoardInfos. + ui_Address + 8 + (16 * b_TorCounter) + + (64 * b_ModulNbr)); + + /*******************************/ + /* Test if counter initialised */ + /*******************************/ + + if (dw_Status & 0x10) { + /***************************/ + /* Test if counter enabled */ + /***************************/ + + if (dw_Status & 0x1) { + + switch (b_ReadType) { + + case APCI1710_TOR_GETPROGRESSSTATUS: + /*******************/ + /* Read the status */ + /*******************/ + + dw_Status = + inl(devpriv-> + s_BoardInfos. + ui_Address + 4 + + (16 * b_TorCounter) + (64 * b_ModulNbr)); + + dw_Status = + dw_Status & 0xF; + + /*****************/ + /* Test if start */ + /*****************/ + + if (dw_Status & 1) { + if (dw_Status & + 2) { + if (dw_Status & 4) { + /************************/ + /* Tor counter owerflow */ + /************************/ + + *pb_TorCounterStatus + = + 3; + } else { + /***********************/ + /* Tor counter started */ + /***********************/ + + *pb_TorCounterStatus + = + 2; + } + } else { + /***********************/ + /* Tor counter started */ + /***********************/ + + *pb_TorCounterStatus + = + 1; + } + } else { + /***************************/ + /* Tor counter not started */ + /***************************/ + + *pb_TorCounterStatus + = 0; + } + break; + + case APCI1710_TOR_GETCOUNTERVALUE: + + /*****************************/ + /* Test the timout parameter */ + /*****************************/ + + if ((ui_TimeOut >= 0) + && (ui_TimeOut + <= + 65535UL)) + { + for (;;) { + /*******************/ + /* Read the status */ + /*******************/ + + dw_Status + = + inl + (devpriv-> + s_BoardInfos. + ui_Address + + + 4 + + + (16 * b_TorCounter) + (64 * b_ModulNbr)); + /********************/ + /* Test if overflow */ + /********************/ + + if ((dw_Status & 4) == 4) { + /******************/ + /* Overflow occur */ + /******************/ + + *pb_TorCounterStatus + = + 3; + + /******************/ + /* Read the value */ + /******************/ + + *pul_TorCounterValue + = + inl + (devpriv-> + s_BoardInfos. + ui_Address + + + 0 + + + (16 * b_TorCounter) + (64 * b_ModulNbr)); + break; + } // if ((dw_Status & 4) == 4) + else { + /*******************************/ + /* Test if measurement stopped */ + /*******************************/ + + if ((dw_Status & 2) == 2) { + /***********************/ + /* A stop signal occur */ + /***********************/ + + *pb_TorCounterStatus + = + 2; + + /******************/ + /* Read the value */ + /******************/ + + *pul_TorCounterValue + = + inl + (devpriv-> + s_BoardInfos. + ui_Address + + + 0 + + + (16 * b_TorCounter) + (64 * b_ModulNbr)); + + break; + } // if ((dw_Status & 2) == 2) + else { + /*******************************/ + /* Test if measurement started */ + /*******************************/ + + if ((dw_Status & 1) == 1) { + /************************/ + /* A start signal occur */ + /************************/ + + *pb_TorCounterStatus + = + 1; + } // if ((dw_Status & 1) == 1) + else { + /***************************/ + /* Measurement not started */ + /***************************/ + + *pb_TorCounterStatus + = + 0; + } // if ((dw_Status & 1) == 1) + } // if ((dw_Status & 2) == 2) + } // if ((dw_Status & 8) == 8) + + if (dw_TimeOut == ui_TimeOut) { + /*****************/ + /* Timeout occur */ + /*****************/ + + break; + } else { + /*************************/ + /* Increment the timeout */ + /*************************/ + + dw_TimeOut + = + dw_TimeOut + + + 1; + + mdelay(1000); + } + } // for (;;) + + /*************************/ + /* Test if timeout occur */ + /*************************/ + + if ((*pb_TorCounterStatus != 3) && (dw_TimeOut == ui_TimeOut) && (ui_TimeOut != 0)) { + /*****************/ + /* Timeout occur */ + /*****************/ + + *pb_TorCounterStatus + = + 4; + } + } else { + /******************************/ + /* Timeout parameter is wrong */ + /******************************/ + + DPRINTK("Timeout parameter is wrong\n"); + i_ReturnValue = + -7; + } + break; + + default: + printk("Inputs wrong\n"); + } // switch end + } // if (dw_Status & 0x1) + else { + /***************************/ + /* Tor counter not enabled */ + /***************************/ + + DPRINTK("Tor counter not enabled\n"); + i_ReturnValue = -6; + } // if (dw_Status & 0x1) + } else { + /*******************************/ + /* Tor counter not initialised */ + /*******************************/ + + DPRINTK("Tor counter not initialised\n"); + i_ReturnValue = -5; + } + } // if (b_TorCounter <= 1) + else { + /**********************************/ + /* Tor counter selection is wrong */ + /**********************************/ + + DPRINTK("Tor counter selection is wrong\n"); + i_ReturnValue = -4; + } // if (b_TorCounter <= 1) + } else { + /******************************************/ + /* The module is not a tor counter module */ + /******************************************/ + + DPRINTK("The module is not a tor counter module\n"); + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.h @@ -0,0 +1,63 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ + +#define APCI1710_30MHZ 30 +#define APCI1710_33MHZ 33 +#define APCI1710_40MHZ 40 + +#define APCI1710_GATE_INPUT 10 + +#define APCI1710_TOR_SIMPLE_MODE 2 +#define APCI1710_TOR_DOUBLE_MODE 3 +#define APCI1710_TOR_QUADRUPLE_MODE 4 + +#define APCI1710_SINGLE 0 +#define APCI1710_CONTINUOUS 1 + +#define APCI1710_TOR_GETPROGRESSSTATUS 0 +#define APCI1710_TOR_GETCOUNTERVALUE 1 +#define APCI1710_TOR_READINTERRUPT 2 + +/* ++----------------------------------------------------------------------------+ +| TOR_COUNTER INISIALISATION FUNCTION | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnConfigInitTorCounter(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + +INT i_APCI1710_InsnWriteEnableDisableTorCounter(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + +INT i_APCI1710_InsnReadGetTorCounterInitialisation(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); +/* ++----------------------------------------------------------------------------+ +| TOR_COUNTER READ FUNCTION | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnBitsGetTorCounterProgressStatusAndValue(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.c @@ -0,0 +1,1038 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-----------------------------------------------------------------------+ + | Project : API APCI1710 | Compiler : gcc | + | Module name : TTL.C | Version : 2.96 | + +-------------------------------+---------------------------------------+ + | Project manager: Eric Stolz | Date : 02/12/2002 | + +-----------------------------------------------------------------------+ + | Description : APCI-1710 TTL I/O module | + | | + | | + +-----------------------------------------------------------------------+ + | UPDATES | + +-----------------------------------------------------------------------+ + | Date | Author | Description of updates | + +----------+-----------+------------------------------------------------+ + | 13/05/98 | S. Weber | TTL digital input / output implementation | + |----------|-----------|------------------------------------------------| + | 08/05/00 | Guinot C | - 0400/0228 All Function in RING 0 | + | | | available | + +-----------------------------------------------------------------------+ + | | | | + | | | | + +-----------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Included files | ++----------------------------------------------------------------------------+ +*/ + +#include "APCI1710_Ttl.h" + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_InitTTLIODirection | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_PortAMode, | +| BYTE_ b_PortBMode, | +| BYTE_ b_PortCMode, | +| BYTE_ b_PortDMode) | ++----------------------------------------------------------------------------+ +| Task APCI1710_TTL_INIT (using defaults) : Configure the TTL I/O operating mode from selected | +| module (b_ModulNbr). You must calling this function be| +| for you call any other function witch access of TTL. | + APCI1710_TTL_INITDIRECTION(user inputs for direction) + ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710| +| BYTE_ b_ModulNbr : Module number to | +| configure (0 to 3) + b_ModulNbr = (BYTE) CR_AREF(insn->chanspec); + b_InitType = (BYTE) data[0]; + b_PortAMode = (BYTE) data[1]; + b_PortBMode = (BYTE) data[2]; + b_PortCMode = (BYTE) data[3]; + b_PortDMode = (BYTE) data[4];| ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: The module parameter is wrong | +| -3: The module is not a TTL module | +| -4: Function not available for this version | +| -5: Port A mode selection is wrong | +| -6: Port B mode selection is wrong | +| -7: Port C mode selection is wrong | +| -8: Port D mode selection is wrong | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnConfigInitTTLIO(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = 0; + BYTE b_ModulNbr; + BYTE b_InitType; + BYTE b_PortAMode; + BYTE b_PortBMode; + BYTE b_PortCMode; + BYTE b_PortDMode; + + b_ModulNbr = (BYTE) CR_AREF(insn->chanspec); + b_InitType = (BYTE) data[0]; + i_ReturnValue = insn->n; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /**************************/ + /* Test if TTL I/O module */ + /**************************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_TTL_IO) { + switch (b_InitType) { + case APCI1710_TTL_INIT: + + devpriv->s_ModuleInfo[b_ModulNbr]. + s_TTLIOInfo.b_TTLInit = 1; + + /***************************/ + /* Set TTL port A to input */ + /***************************/ + + devpriv->s_ModuleInfo[b_ModulNbr]. + s_TTLIOInfo.b_PortConfiguration[0] = 0; + + /***************************/ + /* Set TTL port B to input */ + /***************************/ + + devpriv->s_ModuleInfo[b_ModulNbr]. + s_TTLIOInfo.b_PortConfiguration[1] = 0; + + /***************************/ + /* Set TTL port C to input */ + /***************************/ + + devpriv->s_ModuleInfo[b_ModulNbr]. + s_TTLIOInfo.b_PortConfiguration[2] = 0; + + /****************************/ + /* Set TTL port D to output */ + /****************************/ + + devpriv->s_ModuleInfo[b_ModulNbr]. + s_TTLIOInfo.b_PortConfiguration[3] = 1; + + /*************************/ + /* Set the configuration */ + /*************************/ + + outl(0x8, + devpriv->s_BoardInfos.ui_Address + 20 + + (64 * b_ModulNbr)); + break; + + case APCI1710_TTL_INITDIRECTION: + + b_PortAMode = (BYTE) data[1]; + b_PortBMode = (BYTE) data[2]; + b_PortCMode = (BYTE) data[3]; + b_PortDMode = (BYTE) data[4]; + + /********************/ + /* Test the version */ + /********************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration + [b_ModulNbr] & 0xFFFF) >= + 0x3230) { + /************************/ + /* Test the port A mode */ + /************************/ + + if ((b_PortAMode == 0) + || (b_PortAMode == 1)) { + /************************/ + /* Test the port B mode */ + /************************/ + + if ((b_PortBMode == 0) + || (b_PortBMode == 1)) { + /************************/ + /* Test the port C mode */ + /************************/ + + if ((b_PortCMode == 0) + || (b_PortCMode + == 1)) { + /************************/ + /* Test the port D mode */ + /************************/ + + if ((b_PortDMode == 0) || (b_PortDMode == 1)) { + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_TTLIOInfo. + b_TTLInit + = + 1; + + /***********************/ + /* Set TTL port A mode */ + /***********************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_TTLIOInfo. + b_PortConfiguration + [0] + = + b_PortAMode; + + /***********************/ + /* Set TTL port B mode */ + /***********************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_TTLIOInfo. + b_PortConfiguration + [1] + = + b_PortBMode; + + /***********************/ + /* Set TTL port C mode */ + /***********************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_TTLIOInfo. + b_PortConfiguration + [2] + = + b_PortCMode; + + /***********************/ + /* Set TTL port D mode */ + /***********************/ + + devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_TTLIOInfo. + b_PortConfiguration + [3] + = + b_PortDMode; + + /*************************/ + /* Set the configuration */ + /*************************/ + + outl((b_PortAMode << 0) | (b_PortBMode << 1) | (b_PortCMode << 2) | (b_PortDMode << 3), devpriv->s_BoardInfos.ui_Address + 20 + (64 * b_ModulNbr)); + } else { + /**********************************/ + /* Port D mode selection is wrong */ + /**********************************/ + + DPRINTK("Port D mode selection is wrong\n"); + i_ReturnValue + = + -8; + } + } else { + /**********************************/ + /* Port C mode selection is wrong */ + /**********************************/ + + DPRINTK("Port C mode selection is wrong\n"); + i_ReturnValue = + -7; + } + } else { + /**********************************/ + /* Port B mode selection is wrong */ + /**********************************/ + + DPRINTK("Port B mode selection is wrong\n"); + i_ReturnValue = -6; + } + } else { + /**********************************/ + /* Port A mode selection is wrong */ + /**********************************/ + + DPRINTK("Port A mode selection is wrong\n"); + i_ReturnValue = -5; + } + } else { + /*******************************************/ + /* Function not available for this version */ + /*******************************************/ + + DPRINTK("Function not available for this version\n"); + i_ReturnValue = -4; + } + break; + + DPRINTK("\n"); + default: + printk("Bad Config Type\n"); + } // switch end + } else { + /**********************************/ + /* The module is not a TTL module */ + /**********************************/ + + DPRINTK("The module is not a TTL module\n"); + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| INPUT FUNCTIONS | ++----------------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_ReadTTLIOChannelValue | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_SelectedPort, | +| BYTE_ b_InputChannel, | +| PBYTE_ pb_ChannelStatus) | ++----------------------------------------------------------------------------+ +| Task : Read the status from selected TTL digital input | +| (b_InputChannel) ++----------------------------------------------------------------------------+ +| Task : Read the status from digital input port | +| (b_SelectedPort) from selected TTL module (b_ModulNbr) | ++----------------------------------------------------------------------------+ + ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710| +| BYTE_ b_ModulNbr : Module number to | +| configure (0 to 7) | +| BYTE_ b_SelectedPort, : Selection from TTL I/O | +| port (0 to 2) | +| 0 : Port A selection | +| 1 : Port B selection | +| 2 : Port C selection | +| 3 : Port D selection | +| BYTE_ b_InputChannel : Selection from digital | +| input ( 0 to 2) +APCI1710_TTL_READCHANNEL + b_ModulNbr = CR_AREF(insn->chanspec); + b_SelectedPort= CR_RANGE(insn->chanspec); + b_InputChannel= CR_CHAN(insn->chanspec); + b_ReadType = (BYTE) data[0]; + + APCI1710_TTL_READPORT| + b_ModulNbr = CR_AREF(insn->chanspec); + b_SelectedPort= CR_RANGE(insn->chanspec); + b_ReadType = (BYTE) data[0]; + ++----------------------------------------------------------------------------+ +| Output Parameters : data[0] + + PBYTE_ pb_ChannelStatus : Digital input channel | +| status | +| 0 : Channle is not active| +| 1 : Channle is active | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: The module parameter is wrong | +| -3: The module is not a TTL module | +| -4: The selected TTL input port is wrong | +| -5: The selected TTL digital input is wrong | +| -6: TTL I/O not initialised | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnBitsReadTTLIO(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = 0; + DWORD dw_StatusReg; + BYTE b_ModulNbr; + BYTE b_SelectedPort; + BYTE b_InputChannel; + BYTE b_ReadType; + PBYTE pb_ChannelStatus; + PBYTE pb_PortValue; + + i_ReturnValue = insn->n; + b_ReadType = (BYTE) data[0]; + b_ModulNbr = CR_AREF(insn->chanspec); + b_SelectedPort = CR_RANGE(insn->chanspec); + b_InputChannel = CR_CHAN(insn->chanspec); + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /**************************/ + /* Test if TTL I/O module */ + /**************************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_TTL_IO) { + switch (b_ReadType) { + + case APCI1710_TTL_READCHANNEL: + pb_ChannelStatus = (PBYTE) & data[0]; + /********************************/ + /* Test the TTL I/O port number */ + /********************************/ + + if (((b_SelectedPort <= 2) + && ((devpriv->s_BoardInfos. + dw_MolduleConfiguration + [b_ModulNbr] & + 0xFFFF) == + 0x3130)) + || ((b_SelectedPort <= 3) + && ((devpriv->s_BoardInfos. + dw_MolduleConfiguration + [b_ModulNbr] & + 0xFFFF) >= + 0x3230))) { + /******************************************/ + /* Test the digital imnput channel number */ + /******************************************/ + + if (((b_InputChannel <= 7) + && (b_SelectedPort < 3)) + || ((b_InputChannel <= 1) + && (b_SelectedPort == + 3))) { + /******************************************/ + /* Test if the TTL I/O module initialised */ + /******************************************/ + + if (devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_TTLIOInfo.b_TTLInit == + 1) { + /***********************************/ + /* Test if TTL port used for input */ + /***********************************/ + + if (((devpriv->s_BoardInfos.dw_MolduleConfiguration[b_ModulNbr] & 0xFFFF) == 0x3130) || (((devpriv->s_BoardInfos.dw_MolduleConfiguration[b_ModulNbr] & 0xFFFF) >= 0x3230) && (devpriv->s_ModuleInfo[b_ModulNbr].s_TTLIOInfo.b_PortConfiguration[b_SelectedPort] == 0))) { + /**************************/ + /* Read all digital input */ + /**************************/ + + dw_StatusReg = + inl + (devpriv-> + s_BoardInfos. + ui_Address + + + (64 * b_ModulNbr)); + + *pb_ChannelStatus + = + (BYTE) ( + (dw_StatusReg + >> + (8 * b_SelectedPort)) >> b_InputChannel) & 1; + } else { + /*******************************/ + /* Selected TTL I/O port error */ + /*******************************/ + + DPRINTK("Selected TTL I/O port error\n"); + i_ReturnValue = + -4; + } + } else { + /***************************/ + /* TTL I/O not initialised */ + /***************************/ + + DPRINTK("TTL I/O not initialised\n"); + i_ReturnValue = -6; + } + } else { + /********************************/ + /* Selected digital input error */ + /********************************/ + + DPRINTK("Selected digital input error\n"); + i_ReturnValue = -5; + } + } else { + /*******************************/ + /* Selected TTL I/O port error */ + /*******************************/ + + DPRINTK("Selected TTL I/O port error\n"); + i_ReturnValue = -4; + } + break; + + case APCI1710_TTL_READPORT: + pb_PortValue = (PBYTE) & data[0]; + /********************************/ + /* Test the TTL I/O port number */ + /********************************/ + + if (((b_SelectedPort <= 2) + && ((devpriv->s_BoardInfos. + dw_MolduleConfiguration + [b_ModulNbr] & + 0xFFFF) == + 0x3130)) + || ((b_SelectedPort <= 3) + && ((devpriv->s_BoardInfos. + dw_MolduleConfiguration + [b_ModulNbr] & + 0xFFFF) >= + 0x3230))) { + /******************************************/ + /* Test if the TTL I/O module initialised */ + /******************************************/ + + if (devpriv->s_ModuleInfo[b_ModulNbr]. + s_TTLIOInfo.b_TTLInit == 1) { + /***********************************/ + /* Test if TTL port used for input */ + /***********************************/ + + if (((devpriv->s_BoardInfos. + dw_MolduleConfiguration + [b_ModulNbr] + & + 0xFFFF) + == 0x3130) + || (((devpriv->s_BoardInfos.dw_MolduleConfiguration[b_ModulNbr] & 0xFFFF) >= 0x3230) && (devpriv->s_ModuleInfo[b_ModulNbr].s_TTLIOInfo.b_PortConfiguration[b_SelectedPort] == 0))) { + /**************************/ + /* Read all digital input */ + /**************************/ + + dw_StatusReg = + inl(devpriv-> + s_BoardInfos. + ui_Address + + (64 * b_ModulNbr)); + + *pb_PortValue = + (BYTE) ( + (dw_StatusReg >> + (8 * b_SelectedPort)) & 0xFF); + } else { + /*******************************/ + /* Selected TTL I/O port error */ + /*******************************/ + + DPRINTK("Selected TTL I/O port error\n"); + i_ReturnValue = -4; + } + } else { + /***************************/ + /* TTL I/O not initialised */ + /***************************/ + + DPRINTK("TTL I/O not initialised\n"); + i_ReturnValue = -5; + } + } else { + /*******************************/ + /* Selected TTL I/O port error */ + /*******************************/ + + DPRINTK("Selected TTL I/O port error\n"); + i_ReturnValue = -4; + } + break; + + default: + printk("Bad ReadType\n"); + + } //End Switch + } else { + /**********************************/ + /* The module is not a TTL module */ + /**********************************/ + + DPRINTK("The module is not a TTL module\n"); + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : INT i_APCI1710_InsnReadTTLIOAllPortValue(comedi_device +*dev,comedi_subdevice *s,comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Read the status from all digital input ports | +| (port A, port B and port C) from selected TTL | +| module (b_ModulNbr) | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710| +| BYTE_ b_ModulNbr : Module number to | +| configure (0 to 3) | ++----------------------------------------------------------------------------+ +| Output Parameters : PULONG_ pul_PortValue : Digital TTL inputs port | +| status | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: The module parameter is wrong | +| -3: The module is not a TTL module | +| -4: TTL I/O not initialised | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnReadTTLIOAllPortValue(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = 0; + DWORD dw_StatusReg; + BYTE b_ModulNbr; + PULONG pul_PortValue; + + b_ModulNbr = (BYTE) CR_AREF(insn->chanspec); + i_ReturnValue = insn->n; + pul_PortValue = (PULONG) & data[0]; + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /**************************/ + /* Test if TTL I/O module */ + /**************************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_TTL_IO) { + /******************************************/ + /* Test if the TTL I/O module initialised */ + /******************************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_TTLIOInfo.b_TTLInit == 1) { + /**************************/ + /* Read all digital input */ + /**************************/ + + dw_StatusReg = inl(devpriv->s_BoardInfos. + ui_Address + (64 * b_ModulNbr)); + + /**********************/ + /* Test if TTL Rev1.0 */ + /**********************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration + [b_ModulNbr] & 0xFFFF) == + 0x3130) { + *pul_PortValue = + dw_StatusReg & 0xFFFFFFUL; + } else { + /**************************************/ + /* Test if port A not used for output */ + /**************************************/ + + if (devpriv->s_ModuleInfo[b_ModulNbr]. + s_TTLIOInfo. + b_PortConfiguration[0] == 1) { + *pul_PortValue = + dw_StatusReg & + 0x3FFFF00UL; + } + + /**************************************/ + /* Test if port B not used for output */ + /**************************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_TTLIOInfo. + b_PortConfiguration[1] == 1) { + *pul_PortValue = + dw_StatusReg & + 0x3FF00FFUL; + } + + /**************************************/ + /* Test if port C not used for output */ + /**************************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_TTLIOInfo. + b_PortConfiguration[2] == 1) { + *pul_PortValue = + dw_StatusReg & + 0x300FFFFUL; + } + + /**************************************/ + /* Test if port D not used for output */ + /**************************************/ + + if (devpriv-> + s_ModuleInfo[b_ModulNbr]. + s_TTLIOInfo. + b_PortConfiguration[3] == 1) { + *pul_PortValue = + dw_StatusReg & + 0xFFFFFFUL; + } + } + } else { + /***************************/ + /* TTL I/O not initialised */ + /***************************/ + DPRINTK("TTL I/O not initialised\n"); + i_ReturnValue = -5; + } + } else { + /**********************************/ + /* The module is not a TTL module */ + /**********************************/ + DPRINTK("The module is not a TTL module\n"); + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| OUTPUT FUNCTIONS | ++----------------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Function Name : _INT_ i_APCI1710_SetTTLIOChlOn | +| (BYTE_ b_BoardHandle, | +| BYTE_ b_ModulNbr, | +| BYTE_ b_OutputChannel) +INT i_APCI1710_InsnWriteSetTTLIOChlOnOff(comedi_device *dev,comedi_subdevice *s, + comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Sets or resets the output witch has been passed with the | +| parameter b_Channel. Setting an output means setting | +| an ouput high. | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE_ b_BoardHandle : Handle of board APCI-1710 | +| BYTE_ b_ModulNbr : Selected module number (0 to 3)| +| BYTE_ b_OutputChannel : Selection from digital output | +| channel (0 or 1) | +| 0 : PD0 | +| 1 : PD1 | +| 2 to 9 : PA | +| 10 to 17: PB | +| 18 to 25: PC | + + b_ModulNbr = CR_AREF(insn->chanspec); + b_OutputChannel= CR_CHAN(insn->chanspec); + ui_State = data[0]; // ON or OFF ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -1: The handle parameter of the board is wrong | +| -2: The module parameter is wrong | +| -3: The module is not a TTL I/O module | +| -4: The selected digital output is wrong | +| -5: TTL I/O not initialised see function | +| " i_APCI1710_InitTTLIO" ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnWriteSetTTLIOChlOnOff(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = 0; + DWORD dw_StatusReg = 0; + BYTE b_ModulNbr; + BYTE b_OutputChannel; + UINT ui_State; + + i_ReturnValue = insn->n; + b_ModulNbr = CR_AREF(insn->chanspec); + b_OutputChannel = CR_CHAN(insn->chanspec); + ui_State = data[0]; // ON or OFF + + /**************************/ + /* Test the module number */ + /**************************/ + + if (b_ModulNbr < 4) { + /**************************/ + /* Test if TTL I/O module */ + /**************************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModulNbr] & + 0xFFFF0000UL) == APCI1710_TTL_IO) { + /******************************************/ + /* Test if the TTL I/O module initialised */ + /******************************************/ + + if (devpriv->s_ModuleInfo[b_ModulNbr]. + s_TTLIOInfo.b_TTLInit == 1) { + /***********************************/ + /* Test the TTL I/O channel number */ + /***********************************/ + + if (((b_OutputChannel <= 1) + && ((devpriv->s_BoardInfos. + dw_MolduleConfiguration + [b_ModulNbr] & + 0xFFFF) == + 0x3130)) + || ((b_OutputChannel <= 25) + && ((devpriv->s_BoardInfos. + dw_MolduleConfiguration + [b_ModulNbr] & + 0xFFFF) >= + 0x3230))) { + /****************************************************/ + /* Test if the selected channel is a output channel */ + /****************************************************/ + + if (((b_OutputChannel <= 1) + && (devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_TTLIOInfo. + b_PortConfiguration + [3] == 1)) + || ((b_OutputChannel >= 2) + && (b_OutputChannel <= + 9) + && (devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_TTLIOInfo. + b_PortConfiguration + [0] == 1)) + || ((b_OutputChannel >= 10) + && (b_OutputChannel <= + 17) + && (devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_TTLIOInfo. + b_PortConfiguration + [1] == 1)) + || ((b_OutputChannel >= 18) + && (b_OutputChannel <= + 25) + && (devpriv-> + s_ModuleInfo + [b_ModulNbr]. + s_TTLIOInfo. + b_PortConfiguration + [2] == 1))) { + /************************/ + /* Test if PD0 selected */ + /************************/ + + if (b_OutputChannel == 0) { + + outl(ui_State, + devpriv-> + s_BoardInfos. + ui_Address + + (64 * b_ModulNbr)); + } else { + /************************/ + /* Test if PD1 selected */ + /************************/ + + if (b_OutputChannel == + 1) { + + outl(ui_State, + devpriv-> + s_BoardInfos. + ui_Address + + 4 + + (64 * b_ModulNbr)); + } else { + b_OutputChannel + = + b_OutputChannel + - 2; + + /********************/ + /* Read all channel */ + /********************/ + + dw_StatusReg = + inl + (devpriv-> + s_BoardInfos. + ui_Address + + + (64 * b_ModulNbr)); + if (ui_State) // ON + { + dw_StatusReg + = + (dw_StatusReg + >> + ((b_OutputChannel / 8) * 8)) & 0xFF; + dw_StatusReg + = + dw_StatusReg + | + (1 + << + (b_OutputChannel + % + 8)); + } else // Off + { + dw_StatusReg + = + (dw_StatusReg + >> + ((b_OutputChannel / 8) * 8)) & 0xFF; + dw_StatusReg + = + dw_StatusReg + & + (0xFF + - + (1 << (b_OutputChannel % 8))); + + } + + /****************************/ + /* Set the new output value */ + /****************************/ + + outl(dw_StatusReg, devpriv->s_BoardInfos.ui_Address + 8 + ((b_OutputChannel / 8) * 4) + (64 * b_ModulNbr)); + } + } + } else { + /************************************/ + /* The selected TTL output is wrong */ + /************************************/ + + DPRINTK(" The selected TTL output is wrong\n"); + i_ReturnValue = -4; + } + } else { + /************************************/ + /* The selected TTL output is wrong */ + /************************************/ + + DPRINTK("The selected TTL output is wrong\n"); + i_ReturnValue = -4; + } + } else { + /***************************/ + /* TTL I/O not initialised */ + /***************************/ + + DPRINTK("TTL I/O not initialised\n"); + i_ReturnValue = -5; + } + } else { + /**************************************/ + /* The module is not a TTL I/O module */ + /**************************************/ + + DPRINTK("The module is not a TTL I/O module\n"); + i_ReturnValue = -3; + } + } else { + /***********************/ + /* Module number error */ + /***********************/ + + DPRINTK("Module number error\n"); + i_ReturnValue = -2; + } + + return (i_ReturnValue); +} --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.h @@ -0,0 +1,56 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ + +#define APCI1710_TTL_INIT 0 +#define APCI1710_TTL_INITDIRECTION 1 + +#define APCI1710_TTL_READCHANNEL 0 +#define APCI1710_TTL_READPORT 1 + +/* ++----------------------------------------------------------------------------+ +| TTL INISIALISATION FUNCTION | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnConfigInitTTLIO(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +/* ++----------------------------------------------------------------------------+ +| TTL INPUT FUNCTION | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnBitsReadTTLIO(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +INT i_APCI1710_InsnReadTTLIOAllPortValue(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); +/* ++----------------------------------------------------------------------------+ +| TTL OUTPUT FUNCTIONS | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1710_InsnWriteSetTTLIOChlOnOff(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c @@ -0,0 +1,600 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-------------------------------+---------------------------------------+ + | Project : APCI-035 | Compiler : GCC | + | Module name : hwdrv_apci035.c | Version : 2.96 | + +-------------------------------+---------------------------------------+ + | Project manager: Eric Stolz | Date : 02/12/2002 | + +-------------------------------+---------------------------------------+ + | Description : Hardware Layer Acces For APCI-035 | + +-----------------------------------------------------------------------+ + | UPDATES | + +----------+-----------+------------------------------------------------+ + | Date | Author | Description of updates | + +----------+-----------+------------------------------------------------+ + | | | | + | | | | + | | | | + +----------+-----------+------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Included files | ++----------------------------------------------------------------------------+ +*/ +#include "hwdrv_apci035.h" +INT i_WatchdogNbr = 0; +INT i_Temp = 0; +INT i_Flag = 1; +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI035_ConfigTimerWatchdog | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Configures The Timer , Counter or Watchdog | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT *data : Data Pointer contains | +| configuration parameters as below | +| | +| data[0] : 0 Configure As Timer | +| 1 Configure As Watchdog | + data[1] : Watchdog number +| data[2] : Time base Unit | +| data[3] : Reload Value | + data[4] : External Trigger | + 1:Enable + 0:Disable + data[5] :External Trigger Level + 00 Trigger Disabled + 01 Trigger Enabled (Low level) + 10 Trigger Enabled (High Level) + 11 Trigger Enabled (High/Low level) + data[6] : External Gate | + 1:Enable + 0:Disable + data[7] : External Gate level + 00 Gate Disabled + 01 Gate Enabled (Low level) + 10 Gate Enabled (High Level) + data[8] :Warning Relay + 1: ENABLE + 0: DISABLE + data[9] :Warning Delay available + data[10] :Warning Relay Time unit + data[11] :Warning Relay Time Reload value + data[12] :Reset Relay + 1 : ENABLE + 0 : DISABLE + data[13] :Interrupt + 1 : ENABLE + 0 : DISABLE + +| ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI035_ConfigTimerWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_Status = 0; + UINT ui_Command = 0; + UINT ui_Mode = 0; + i_Temp = 0; + devpriv->tsk_Current = current; + devpriv->b_TimerSelectMode = data[0]; + i_WatchdogNbr = data[1]; + if (data[0] == 0) { + ui_Mode = 2; + } else { + ui_Mode = 0; + } +//ui_Command = inl(devpriv->iobase+((i_WatchdogNbr-1)*32)+12); + ui_Command = 0; +//ui_Command = ui_Command & 0xFFFFF9FEUL; + outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12); + ui_Command = 0; + ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12); +/************************/ +/* Set the reload value */ +/************************/ + outl(data[3], devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 4); +/*********************/ +/* Set the time unit */ +/*********************/ + outl(data[2], devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 8); + if (data[0] == ADDIDATA_TIMER) { + + /******************************/ + /* Set the mode : */ + /* - Disable the hardware */ + /* - Disable the counter mode */ + /* - Disable the warning */ + /* - Disable the reset */ + /* - Enable the timer mode */ + /* - Set the timer mode */ + /******************************/ + + ui_Command = + (ui_Command & 0xFFF719E2UL) | ui_Mode << 13UL | 0x10UL; + + } //if (data[0] == ADDIDATA_TIMER) + else { + if (data[0] == ADDIDATA_WATCHDOG) { + + /******************************/ + /* Set the mode : */ + /* - Disable the hardware */ + /* - Disable the counter mode */ + /* - Disable the warning */ + /* - Disable the reset */ + /* - Disable the timer mode */ + /******************************/ + + ui_Command = ui_Command & 0xFFF819E2UL; + + } else { + printk("\n The parameter for Timer/watchdog selection is in error\n"); + return -EINVAL; + } + } + outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12); + ui_Command = 0; + ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12); +/********************************/ +/* Disable the hardware trigger */ +/********************************/ + ui_Command = ui_Command & 0xFFFFF89FUL; + if (data[4] == ADDIDATA_ENABLE) { + /**********************************/ + /* Set the hardware trigger level */ + /**********************************/ + ui_Command = ui_Command | (data[5] << 5); + } + outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12); + ui_Command = 0; + ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12); +/*****************************/ +/* Disable the hardware gate */ +/*****************************/ + ui_Command = ui_Command & 0xFFFFF87FUL; + if (data[6] == ADDIDATA_ENABLE) { +/*******************************/ +/* Set the hardware gate level */ +/*******************************/ + ui_Command = ui_Command | (data[7] << 7); + } + outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12); + ui_Command = 0; + ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12); +/*******************************/ +/* Disable the hardware output */ +/*******************************/ + ui_Command = ui_Command & 0xFFFFF9FBUL; +/*********************************/ +/* Set the hardware output level */ +/*********************************/ + ui_Command = ui_Command | (data[8] << 2); + outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12); + if (data[9] == ADDIDATA_ENABLE) { + /************************/ + /* Set the reload value */ + /************************/ + outl(data[11], + devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 24); + /**********************/ + /* Set the time unite */ + /**********************/ + outl(data[10], + devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 28); + } + + ui_Command = 0; + ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12); + /*******************************/ + /* Disable the hardware output */ + /*******************************/ + ui_Command = ui_Command & 0xFFFFF9F7UL; + /*********************************/ + /* Set the hardware output level */ + /*********************************/ + ui_Command = ui_Command | (data[12] << 3); + outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12); + /*************************************/ + /** Enable the watchdog interrupt **/ + /*************************************/ + ui_Command = 0; + ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12); +/*******************************/ +/* Set the interrupt selection */ +/*******************************/ + ui_Status = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 16); + + ui_Command = (ui_Command & 0xFFFFF9FDUL) | (data[13] << 1); + outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12); + + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI035_StartStopWriteTimerWatchdog | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Start / Stop The Selected Timer , or Watchdog | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT *data : Data Pointer contains | +| configuration parameters as below | +| | +| data[0] : 0 - Stop Selected Timer/Watchdog | +| 1 - Start Selected Timer/Watchdog | +| 2 - Trigger Selected Timer/Watchdog | +| 3 - Stop All Timer/Watchdog | +| 4 - Start All Timer/Watchdog | +| 5 - Trigger All Timer/Watchdog | +| | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI035_StartStopWriteTimerWatchdog(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + UINT ui_Command = 0; + INT i_Count = 0; + if (data[0] == 1) { + ui_Command = + inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12); + /**********************/ + /* Start the hardware */ + /**********************/ + ui_Command = (ui_Command & 0xFFFFF9FFUL) | 0x1UL; + outl(ui_Command, + devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12); + } // if (data[0]==1) + if (data[0] == 2) { + ui_Command = + inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12); + /***************************/ + /* Set the trigger command */ + /***************************/ + ui_Command = (ui_Command & 0xFFFFF9FFUL) | 0x200UL; + outl(ui_Command, + devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12); + } + + if (data[0] == 0) //Stop The Watchdog + { + //Stop The Watchdog + ui_Command = 0; + //ui_Command = inl(devpriv->iobase+((i_WatchdogNbr-1)*32)+12); + //ui_Command = ui_Command & 0xFFFFF9FEUL; + outl(ui_Command, + devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12); + } // if (data[1]==0) + if (data[0] == 3) //stop all Watchdogs + { + ui_Command = 0; + for (i_Count = 1; i_Count <= 4; i_Count++) { + if (devpriv->b_TimerSelectMode == ADDIDATA_WATCHDOG) { + ui_Command = 0x2UL; + } else { + ui_Command = 0x10UL; + } + i_WatchdogNbr = i_Count; + outl(ui_Command, + devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + + 0); + } + + } + if (data[0] == 4) //start all Watchdogs + { + ui_Command = 0; + for (i_Count = 1; i_Count <= 4; i_Count++) { + if (devpriv->b_TimerSelectMode == ADDIDATA_WATCHDOG) { + ui_Command = 0x1UL; + } else { + ui_Command = 0x8UL; + } + i_WatchdogNbr = i_Count; + outl(ui_Command, + devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + + 0); + } + } + if (data[0] == 5) //trigger all Watchdogs + { + ui_Command = 0; + for (i_Count = 1; i_Count <= 4; i_Count++) { + if (devpriv->b_TimerSelectMode == ADDIDATA_WATCHDOG) { + ui_Command = 0x4UL; + } else { + ui_Command = 0x20UL; + } + + i_WatchdogNbr = i_Count; + outl(ui_Command, + devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + + 0); + } + i_Temp = 1; + } + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI035_ReadTimerWatchdog | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Read The Selected Timer , Counter or Watchdog | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT *data : Data Pointer contains | +| configuration parameters as below | +| | +| | ++----------------------------------------------------------------------------+ +| Output Parameters : data[0] : software trigger status + data[1] : hardware trigger status +| data[2] : Software clear status + data[3] : Overflow status + data[4] : Timer actual value + + ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI035_ReadTimerWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_Status = 0; // Status register + i_WatchdogNbr = insn->unused[0]; + /******************/ + /* Get the status */ + /******************/ + ui_Status = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 16); + /***********************************/ + /* Get the software trigger status */ + /***********************************/ + data[0] = ((ui_Status >> 1) & 1); + /***********************************/ + /* Get the hardware trigger status */ + /***********************************/ + data[1] = ((ui_Status >> 2) & 1); + /*********************************/ + /* Get the software clear status */ + /*********************************/ + data[2] = ((ui_Status >> 3) & 1); + /***************************/ + /* Get the overflow status */ + /***************************/ + data[3] = ((ui_Status >> 0) & 1); + if (devpriv->b_TimerSelectMode == ADDIDATA_TIMER) { + data[4] = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 0); + + } // if (devpriv->b_TimerSelectMode==ADDIDATA_TIMER) + + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : INT i_APCI035_ConfigAnalogInput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Configures The Analog Input Subdevice | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| comedi_subdevice *s : Subdevice Pointer | +| comedi_insn *insn : Insn Structure Pointer | +| lsampl_t *data : Data Pointer contains | +| configuration parameters as below | +| data[0] : Warning delay value +| | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI035_ConfigAnalogInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + devpriv->tsk_Current = current; + outl(0x200 | 0, devpriv->iobase + 128 + 0x4); + outl(0, devpriv->iobase + 128 + 0); +/********************************/ +/* Initialise the warning value */ +/********************************/ + outl(0x300 | 0, devpriv->iobase + 128 + 0x4); + outl((data[0] << 8), devpriv->iobase + 128 + 0); + outl(0x200000UL, devpriv->iobase + 128 + 12); + + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI035_ReadAnalogInput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Read value of the selected channel | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT ui_NoOfChannels : No Of Channels To read | +| UINT *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | +| data[0] : Digital Value Of Input | +| | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI035_ReadAnalogInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_CommandRegister = 0; +/******************/ +/* Set the start */ +/******************/ + ui_CommandRegister = 0x80000; + /******************************/ + /* Write the command register */ + /******************************/ + outl(ui_CommandRegister, devpriv->iobase + 128 + 8); + +/***************************************/ +/* Read the digital value of the input */ +/***************************************/ + data[0] = inl(devpriv->iobase + 128 + 28); + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI035_Reset(comedi_device *dev) | +| | ++----------------------------------------------------------------------------+ +| Task :Resets the registers of the card | ++----------------------------------------------------------------------------+ +| Input Parameters : | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI035_Reset(comedi_device * dev) +{ + INT i_Count = 0; + for (i_Count = 1; i_Count <= 4; i_Count++) { + i_WatchdogNbr = i_Count; + outl(0x0, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 0); //stop all timers + } + outl(0x0, devpriv->iobase + 128 + 12); //Disable the warning delay + + return 0; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : static void v_APCI035_Interrupt | +| (int irq , void *d) | ++----------------------------------------------------------------------------+ +| Task : Interrupt processing Routine | ++----------------------------------------------------------------------------+ +| Input Parameters : int irq : irq number | +| void *d : void pointer | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +static void v_APCI035_Interrupt(int irq, void *d) +{ + comedi_device *dev = d; + UINT ui_StatusRegister1 = 0; + UINT ui_StatusRegister2 = 0; + UINT ui_ReadCommand = 0; + UINT ui_ChannelNumber = 0; + UINT ui_DigitalTemperature = 0; + if (i_Temp == 1) { + i_WatchdogNbr = i_Flag; + i_Flag = i_Flag + 1; + } + /**************************************/ + /* Read the interrupt status register of temperature Warning */ + /**************************************/ + ui_StatusRegister1 = inl(devpriv->iobase + 128 + 16); + /**************************************/ + /* Read the interrupt status register for Watchdog/timer */ + /**************************************/ + + ui_StatusRegister2 = + inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 20); + + if ((((ui_StatusRegister1) & 0x8) == 0x8)) //Test if warning relay interrupt + { + /**********************************/ + /* Disable the temperature warning */ + /**********************************/ + ui_ReadCommand = inl(devpriv->iobase + 128 + 12); + ui_ReadCommand = ui_ReadCommand & 0xFFDF0000UL; + outl(ui_ReadCommand, devpriv->iobase + 128 + 12); + /***************************/ + /* Read the channel number */ + /***************************/ + ui_ChannelNumber = inl(devpriv->iobase + 128 + 60); + /**************************************/ + /* Read the digital temperature value */ + /**************************************/ + ui_DigitalTemperature = inl(devpriv->iobase + 128 + 60); + send_sig(SIGIO, devpriv->tsk_Current, 0); // send signal to the sample + } //if (((ui_StatusRegister1 & 0x8) == 0x8)) + + else { + if ((ui_StatusRegister2 & 0x1) == 0x1) { + send_sig(SIGIO, devpriv->tsk_Current, 0); // send signal to the sample + } + } //else if (((ui_StatusRegister1 & 0x8) == 0x8)) + + return; +} --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.h @@ -0,0 +1,129 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +// Card Specific information +#define APCI035_BOARD_VENDOR_ID 0x15B8 +#define APCI035_ADDRESS_RANGE 255 + +INT i_TW_Number; +struct { + INT i_Gain; + INT i_Polarity; + INT i_OffsetRange; + INT i_Coupling; + INT i_SingleDiff; + INT i_AutoCalibration; + UINT ui_ReloadValue; + UINT ui_TimeUnitReloadVal; + INT i_Interrupt; + INT i_ModuleSelection; +} Config_Parameters_Main; + +//ANALOG INPUT RANGE +comedi_lrange range_apci035_ai = { 8, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2), + BIP_RANGE(1), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2), + UNI_RANGE(1) + } +}; + +// Timer / Watchdog Related Defines + +#define APCI035_TCW_SYNC_ENABLEDISABLE 0 +#define APCI035_TCW_RELOAD_VALUE 4 +#define APCI035_TCW_TIMEBASE 8 +#define APCI035_TCW_PROG 12 +#define APCI035_TCW_TRIG_STATUS 16 +#define APCI035_TCW_IRQ 20 +#define APCI035_TCW_WARN_TIMEVAL 24 +#define APCI035_TCW_WARN_TIMEBASE 28 + +#define ADDIDATA_TIMER 0 +//#define ADDIDATA_WATCHDOG 1 + +#define APCI035_TW1 0 +#define APCI035_TW2 32 +#define APCI035_TW3 64 +#define APCI035_TW4 96 + +#define APCI035_AI_OFFSET 0 +#define APCI035_TEMP 128 +#define APCI035_ALR_SEQ 4 +#define APCI035_START_STOP_INDEX 8 +#define APCI035_ALR_START_STOP 12 +#define APCI035_ALR_IRQ 16 +#define APCI035_EOS 20 +#define APCI035_CHAN_NO 24 +#define APCI035_CHAN_VAL 28 +#define APCI035_CONV_TIME_TIME_BASE 36 +#define APCI035_RELOAD_CONV_TIME_VAL 32 +#define APCI035_DELAY_TIME_TIME_BASE 44 +#define APCI035_RELOAD_DELAY_TIME_VAL 40 +#define ENABLE_EXT_TRIG 1 +#define ENABLE_EXT_GATE 2 +#define ENABLE_EXT_TRIG_GATE 3 + +#define ANALOG_INPUT 0 +#define TEMPERATURE 1 +#define RESISTANCE 2 + +#define ADDIDATA_GREATER_THAN_TEST 0 +#define ADDIDATA_LESS_THAN_TEST 1 + +#define APCI035_MAXVOLT 2.5 + +#define ADDIDATA_UNIPOLAR 1 +#define ADDIDATA_BIPOLAR 2 + +//ADDIDATA Enable Disable +#define ADDIDATA_ENABLE 1 +#define ADDIDATA_DISABLE 0 + +// Hardware Layer functions for Apci035 + +// TIMER +// timer value is passed as u seconds +INT i_APCI035_ConfigTimerWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +INT i_APCI035_StartStopWriteTimerWatchdog(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); +INT i_APCI035_ReadTimerWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +//Temperature Related Defines (Analog Input Subdevice) + +INT i_APCI035_ConfigAnalogInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +INT i_APCI035_ReadAnalogInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +//Interrupt +static void v_APCI035_Interrupt(int irq, void *d); + +//Reset functions +INT i_APCI035_Reset(comedi_device * dev); --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.c @@ -0,0 +1,285 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-------------------------------+---------------------------------------+ + | Project : APCI-1032 | Compiler : GCC | + | Module name : hwdrv_apci1032.c| Version : 2.96 | + +-------------------------------+---------------------------------------+ + | Project manager: Eric Stolz | Date : 02/12/2002 | + +-------------------------------+---------------------------------------+ + | Description : Hardware Layer Acces For APCI-1032 | + +-----------------------------------------------------------------------+ + | UPDATES | + +----------+-----------+------------------------------------------------+ + | Date | Author | Description of updates | + +----------+-----------+------------------------------------------------+ + | | | | + | | | | + | | | | + +----------+-----------+------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Included files | ++----------------------------------------------------------------------------+ +*/ +#include "hwdrv_apci1032.h" +#include +//Global variables +UINT ui_InterruptStatus = 0; + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1032_ConfigDigitalInput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Configures the digital input Subdevice | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| lsampl_t *data : Data Pointer contains | +| configuration parameters as below | +| | +| data[0] : 1 Enable Digital Input Interrupt | +| 0 Disable Digital Input Interrupt | +| data[1] : 0 ADDIDATA Interrupt OR LOGIC | +| : 1 ADDIDATA Interrupt AND LOGIC | +| data[2] : Interrupt mask for the mode 1 | +| data[3] : Interrupt mask for the mode 2 | +| | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1032_ConfigDigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_TmpValue; + + ULONG ul_Command1 = 0; + ULONG ul_Command2 = 0; + devpriv->tsk_Current = current; + + /*******************************/ + /* Set the digital input logic */ + /*******************************/ + if (data[0] == ADDIDATA_ENABLE) { + ul_Command1 = ul_Command1 | data[2]; + ul_Command2 = ul_Command2 | data[3]; + outl(ul_Command1, + devpriv->iobase + APCI1032_DIGITAL_IP_INTERRUPT_MODE1); + outl(ul_Command2, + devpriv->iobase + APCI1032_DIGITAL_IP_INTERRUPT_MODE2); + if (data[1] == ADDIDATA_OR) { + outl(0x4, devpriv->iobase + APCI1032_DIGITAL_IP_IRQ); + ui_TmpValue = + inl(devpriv->iobase + APCI1032_DIGITAL_IP_IRQ); + } //if (data[1] == ADDIDATA_OR) + else { + outl(0x6, devpriv->iobase + APCI1032_DIGITAL_IP_IRQ); + } //else if(data[1] == ADDIDATA_OR) + } // if( data[0] == ADDIDATA_ENABLE) + else { + ul_Command1 = ul_Command1 & 0xFFFF0000; + ul_Command2 = ul_Command2 & 0xFFFF0000; + outl(ul_Command1, + devpriv->iobase + APCI1032_DIGITAL_IP_INTERRUPT_MODE1); + outl(ul_Command2, + devpriv->iobase + APCI1032_DIGITAL_IP_INTERRUPT_MODE2); + outl(0x0, devpriv->iobase + APCI1032_DIGITAL_IP_IRQ); + } //else if ( data[0] == ADDIDATA_ENABLE) + + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1032_Read1DigitalInput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Return the status of the digital input | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT ui_Channel : Channel number to read | +| lsampl_t *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI1032_Read1DigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_TmpValue = 0; + UINT ui_Channel; + ui_Channel = CR_CHAN(insn->chanspec); + if (ui_Channel >= 0 && ui_Channel <= 31) { + ui_TmpValue = (UINT) inl(devpriv->iobase + APCI1032_DIGITAL_IP); + // since only 1 channel reqd to bring it to last bit it is rotated + // 8 +(chan - 1) times then ANDed with 1 for last bit. + *data = (ui_TmpValue >> ui_Channel) & 0x1; + } //if(ui_Channel >= 0 && ui_Channel <=31) + else { + //comedi_error(dev," \n chan spec wrong\n"); + return -EINVAL; // "sorry channel spec wrong " + } //else if(ui_Channel >= 0 && ui_Channel <=31) + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1032_ReadMoreDigitalInput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Return the status of the Requested digital inputs | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT ui_NoOfChannels : No Of Channels To be Read | +| UINT *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1032_ReadMoreDigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_PortValue = data[0]; + UINT ui_Mask = 0; + UINT ui_NoOfChannels; + + ui_NoOfChannels = CR_CHAN(insn->chanspec); + if (data[1] == 0) { + *data = (UINT) inl(devpriv->iobase + APCI1032_DIGITAL_IP); + switch (ui_NoOfChannels) { + case 2: + ui_Mask = 3; + *data = (*data >> (2 * ui_PortValue)) & ui_Mask; + break; + case 4: + ui_Mask = 15; + *data = (*data >> (4 * ui_PortValue)) & ui_Mask; + break; + case 8: + ui_Mask = 255; + *data = (*data >> (8 * ui_PortValue)) & ui_Mask; + break; + case 16: + ui_Mask = 65535; + *data = (*data >> (16 * ui_PortValue)) & ui_Mask; + break; + case 31: + break; + default: + //comedi_error(dev," \nchan spec wrong\n"); + return -EINVAL; // "sorry channel spec wrong " + break; + } //switch(ui_NoOfChannels) + } //if(data[1]==0) + else { + if (data[1] == 1) { + *data = ui_InterruptStatus; + } //if(data[1]==1) + } //else if(data[1]==0) + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : static void v_APCI1032_Interrupt | +| (int irq , void *d) | ++----------------------------------------------------------------------------+ +| Task : Interrupt handler for the interruptible digital inputs | ++----------------------------------------------------------------------------+ +| Input Parameters : int irq : irq number | +| void *d : void pointer | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +static VOID v_APCI1032_Interrupt(int irq, void *d) +{ + comedi_device *dev = d; + + UINT ui_Temp; + //disable the interrupt + ui_Temp = inl(devpriv->iobase + APCI1032_DIGITAL_IP_IRQ); + outl(ui_Temp & APCI1032_DIGITAL_IP_INTERRUPT_DISABLE, + devpriv->iobase + APCI1032_DIGITAL_IP_IRQ); + ui_InterruptStatus = + inl(devpriv->iobase + APCI1032_DIGITAL_IP_INTERRUPT_STATUS); + ui_InterruptStatus = ui_InterruptStatus & 0X0000FFFF; + send_sig(SIGIO, devpriv->tsk_Current, 0); // send signal to the sample + outl(ui_Temp, devpriv->iobase + APCI1032_DIGITAL_IP_IRQ); //enable the interrupt + return; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1032_Reset(comedi_device *dev) | | ++----------------------------------------------------------------------------+ +| Task :resets all the registers | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1032_Reset(comedi_device * dev) +{ + outl(0x0, devpriv->iobase + APCI1032_DIGITAL_IP_IRQ); //disable the interrupts + inl(devpriv->iobase + APCI1032_DIGITAL_IP_INTERRUPT_STATUS); //Reset the interrupt status register + outl(0x0, devpriv->iobase + APCI1032_DIGITAL_IP_INTERRUPT_MODE1); //Disable the and/or interrupt + outl(0x0, devpriv->iobase + APCI1032_DIGITAL_IP_INTERRUPT_MODE2); + return 0; +} --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.h @@ -0,0 +1,70 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ + +/********* Definitions for APCI-1032 card *****/ + +#define APCI1032_BOARD_VENDOR_ID 0x15B8 +#define APCI1032_ADDRESS_RANGE 20 +//DIGITAL INPUT DEFINE + +#define APCI1032_DIGITAL_IP 0 +#define APCI1032_DIGITAL_IP_INTERRUPT_MODE1 4 +#define APCI1032_DIGITAL_IP_INTERRUPT_MODE2 8 +#define APCI1032_DIGITAL_IP_IRQ 16 + +//Digital Input IRQ Function Selection +#define ADDIDATA_OR 0 +#define ADDIDATA_AND 1 + +//Digital Input Interrupt Status +#define APCI1032_DIGITAL_IP_INTERRUPT_STATUS 12 + +//Digital Input Interrupt Enable Disable. +#define APCI1032_DIGITAL_IP_INTERRUPT_ENABLE 0x4 +#define APCI1032_DIGITAL_IP_INTERRUPT_DISABLE 0xFFFFFFFB + +//ADDIDATA Enable Disable + +#define ADDIDATA_ENABLE 1 +#define ADDIDATA_DISABLE 0 + +// Hardware Layer functions for Apci1032 + +//DI +// for di read + +INT i_APCI1032_ConfigDigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +INT i_APCI1032_Read1DigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +INT i_APCI1032_ReadMoreDigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +// Interrupt functions..... + +static VOID v_APCI1032_Interrupt(int irq, void *d); +//Reset +INT i_APCI1032_Reset(comedi_device * dev); --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c @@ -0,0 +1,3045 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-------------------------------+---------------------------------------+ + | Project : APCI-1500 | Compiler : GCC | + | Module name : hwdrv_apci1500.c| Version : 2.96 | + +-------------------------------+---------------------------------------+ + | Project manager: Eric Stolz | Date : 02/12/2002 | + +-------------------------------+---------------------------------------+ + | Description : Hardware Layer Acces For APCI-1500 | + +-----------------------------------------------------------------------+ + | UPDATES | + +----------+-----------+------------------------------------------------+ + | Date | Author | Description of updates | + +----------+-----------+------------------------------------------------+ + | | | | + | | | | + | | | | + +----------+-----------+------------------------------------------------+ +*/ +#include "hwdrv_apci1500.h" + +int i_TimerCounter1Init = 0; +int i_TimerCounter2Init = 0; +int i_WatchdogCounter3Init = 0; +int i_Event1Status = 0, i_Event2Status = 0; +int i_TimerCounterWatchdogInterrupt = 0; +int i_Logic = 0, i_CounterLogic = 0; +int i_InterruptMask = 0; +int i_InputChannel = 0; +int i_TimerCounter1Enabled = 0, i_TimerCounter2Enabled = + 0, i_WatchdogCounter3Enabled = 0; + +/* + +----------------------------------------------------------------------------+ +| Function Name : int i_APCI1500_ConfigDigitalInputEvent | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : An event can be generated for each port. | +| The first event is related to the first 8 channels | +| (port 1) and the second to the following 6 channels | +| (port 2). An interrupt is generated when one or both | +| events have occurred | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| lsampl_t *data : Data Pointer contains | +| configuration parameters as below | +| | +| data[0] :Number of the input port on | +| which the event will take place | +| (1 or 2) + data[1] : The event logic for port 1 has | +| three possibilities | +| :0 APCI1500_AND :This logic | +| links | +| the inputs | +| with an AND | +| logic. | +| 1 APCI1500_OR :This logic | +| links | +| the inputs | +| with a | +| OR logic. | +| 2 APCI1500_OR_PRIORITY | +| :This logic | +| links | +| the inputs | +| with a | +| priority | +| OR logic. | +| Input 1 | +| has the | +| highest | +| priority | +| level and | +| input 8 | +| the smallest| +| For the second port the user has| +| 1 possibility: | +| APCI1500_OR :This logic | +| links | +| the inputs | +| with a | +| polarity | +| OR logic | +| data[2] : These 8-character word for port1| +| and 6-character word for port 2 | +| give the mask of the event. | +| Each place gives the state | +| of the input channels and can | +| have one of these six characters| +| | +| 0 : This input must be on 0 | +| 1 : This input must be on 1 | +| 2 : This input reacts to | +| a falling edge | +| 3 : This input reacts to a | +| rising edge | +| 4 : This input reacts to both edges | +| +| 5 : This input is not | +| used for event | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1500_ConfigDigitalInputEvent(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + int i_PatternPolarity = 0, i_PatternTransition = 0, i_PatternMask = 0; + int i_MaxChannel = 0, i_Count = 0, i_EventMask = 0; + int i_PatternTransitionCount = 0, i_RegValue; + int i; + + /*************************************************/ + /* Selects the master interrupt control register */ + /*************************************************/ + outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /**********************************************/ + /* Disables the main interrupt on the board */ + /**********************************************/ + outb(0x00, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + + if (data[0] == 1) { + i_MaxChannel = 8; + } // if (data[0] == 1) + else { + if (data[0] == 2) { + i_MaxChannel = 6; + } // if(data[0]==2) + else { + printk("\nThe specified port event does not exist\n"); + return -EINVAL; + } //else if(data[0]==2) + } //else if (data[0] == 1) + switch (data[1]) { + case 0: + data[1] = APCI1500_AND; + break; + case 1: + data[1] = APCI1500_OR; + break; + case 2: + data[1] = APCI1500_OR_PRIORITY; + break; + default: + printk("\nThe specified interrupt logic does not exist\n"); + return -EINVAL; + } //switch(data[1]); + + i_Logic = data[1]; + for (i_Count = i_MaxChannel, i = 0; i_Count > 0; i_Count--, i++) { + i_EventMask = data[2 + i]; + switch (i_EventMask) { + case 0: + i_PatternMask = + i_PatternMask | (1 << (i_MaxChannel - i_Count)); + break; + case 1: + i_PatternMask = + i_PatternMask | (1 << (i_MaxChannel - i_Count)); + i_PatternPolarity = + i_PatternPolarity | (1 << (i_MaxChannel - + i_Count)); + break; + case 2: + i_PatternMask = + i_PatternMask | (1 << (i_MaxChannel - i_Count)); + i_PatternTransition = + i_PatternTransition | (1 << (i_MaxChannel - + i_Count)); + break; + case 3: + i_PatternMask = + i_PatternMask | (1 << (i_MaxChannel - i_Count)); + i_PatternPolarity = + i_PatternPolarity | (1 << (i_MaxChannel - + i_Count)); + i_PatternTransition = + i_PatternTransition | (1 << (i_MaxChannel - + i_Count)); + break; + case 4: + i_PatternTransition = + i_PatternTransition | (1 << (i_MaxChannel - + i_Count)); + break; + case 5: + break; + default: + printk("\nThe option indicated in the event mask does not exist\n"); + return -EINVAL; + } // switch(i_EventMask) + } //for (i_Count = i_MaxChannel; i_Count >0;i_Count --) + + if (data[0] == 1) { + /****************************/ + /* Test the interrupt logic */ + /****************************/ + + if (data[1] == APCI1500_AND || + data[1] == APCI1500_OR || + data[1] == APCI1500_OR_PRIORITY) { + /**************************************/ + /* Tests if a transition was declared */ + /* for a OR PRIORITY logic */ + /**************************************/ + + if (data[1] == APCI1500_OR_PRIORITY + && i_PatternTransition != 0) { + /********************************************/ + /* Transition error on an OR PRIORITY logic */ + /********************************************/ + printk("\nTransition error on an OR PRIORITY logic\n"); + return -EINVAL; + } // if (data[1]== APCI1500_OR_PRIORITY && i_PatternTransition != 0) + + /*************************************/ + /* Tests if more than one transition */ + /* was declared for an AND logic */ + /*************************************/ + + if (data[1] == APCI1500_AND) { + for (i_Count = 0; i_Count < 8; i_Count++) { + i_PatternTransitionCount = + i_PatternTransitionCount + + ((i_PatternTransition >> + i_Count) & 0x1); + + } //for (i_Count = 0; i_Count < 8; i_Count++) + + if (i_PatternTransitionCount > 1) { + /****************************************/ + /* Transition error on an AND logic */ + /****************************************/ + printk("\n Transition error on an AND logic\n"); + return -EINVAL; + } // if (i_PatternTransitionCount > 1) + } // if (data[1]== APCI1500_AND) + + /*****************************************************************/ + /* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */ + /*****************************************************************/ + outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /******************/ + /* Disable Port A */ + /******************/ + outb(0xF0, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /**********************************************/ + /* Selects the polarity register of port 1 */ + /**********************************************/ + outb(APCI1500_RW_PORT_A_PATTERN_POLARITY, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + outb(i_PatternPolarity, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /*********************************************/ + /* Selects the pattern mask register of */ + /* port 1 */ + /*********************************************/ + outb(APCI1500_RW_PORT_A_PATTERN_MASK, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + outb(i_PatternMask, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /********************************************/ + /* Selects the pattern transition register */ + /* of port 1 */ + /********************************************/ + outb(APCI1500_RW_PORT_A_PATTERN_TRANSITION, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + outb(i_PatternTransition, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /******************************************/ + /* Selects the mode specification mask */ + /* register of port 1 */ + /******************************************/ + outb(APCI1500_RW_PORT_A_SPECIFICATION, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + i_RegValue = + inb(devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /******************************************/ + /* Selects the mode specification mask */ + /* register of port 1 */ + /******************************************/ + outb(APCI1500_RW_PORT_A_SPECIFICATION, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /**********************/ + /* Port A new mode */ + /**********************/ + + i_RegValue = (i_RegValue & 0xF9) | data[1] | 0x9; + outb(i_RegValue, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + i_Event1Status = 1; + + /*****************************************************************/ + /* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */ + /*****************************************************************/ + + outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /*****************/ + /* Enable Port A */ + /*****************/ + outb(0xF4, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + } // if(data[1]==APCI1500_AND||data[1]==APCI1500_OR||data[1]==APCI1500_OR_PRIORITY) + else { + printk("\nThe choice for interrupt logic does not exist\n"); + return -EINVAL; + } // else }// if(data[1]==APCI1500_AND||data[1]==APCI1500_OR||data[1]==APCI1500_OR_PRIORITY) + } // if (data[0]== 1) + + /************************************/ + /* Test if event setting for port 2 */ + /************************************/ + + if (data[0] == 2) { + /************************/ + /* Test the event logic */ + /************************/ + + if (data[1] == APCI1500_OR) { + /*****************************************************************/ + /* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */ + /*****************************************************************/ + outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /******************/ + /* Disable Port B */ + /******************/ + outb(0x74, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /****************************************/ + /* Selects the mode specification mask */ + /* register of port B */ + /****************************************/ + outb(APCI1500_RW_PORT_B_SPECIFICATION, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + i_RegValue = + inb(devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /******************************************/ + /* Selects the mode specification mask */ + /* register of port B */ + /******************************************/ + outb(APCI1500_RW_PORT_B_SPECIFICATION, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + i_RegValue = i_RegValue & 0xF9; + outb(i_RegValue, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /**********************************/ + /* Selects error channels 1 and 2 */ + /**********************************/ + + i_PatternMask = (i_PatternMask | 0xC0); + i_PatternPolarity = (i_PatternPolarity | 0xC0); + i_PatternTransition = (i_PatternTransition | 0xC0); + + /**********************************************/ + /* Selects the polarity register of port 2 */ + /**********************************************/ + outb(APCI1500_RW_PORT_B_PATTERN_POLARITY, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + outb(i_PatternPolarity, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /**********************************************/ + /* Selects the pattern transition register */ + /* of port 2 */ + /**********************************************/ + outb(APCI1500_RW_PORT_B_PATTERN_TRANSITION, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + outb(i_PatternTransition, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /**********************************************/ + /* Selects the pattern Mask register */ + /* of port 2 */ + /**********************************************/ + + outb(APCI1500_RW_PORT_B_PATTERN_MASK, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + outb(i_PatternMask, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /******************************************/ + /* Selects the mode specification mask */ + /* register of port 2 */ + /******************************************/ + outb(APCI1500_RW_PORT_B_SPECIFICATION, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + i_RegValue = + inb(devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /******************************************/ + /* Selects the mode specification mask */ + /* register of port 2 */ + /******************************************/ + outb(APCI1500_RW_PORT_B_SPECIFICATION, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + i_RegValue = (i_RegValue & 0xF9) | 4; + outb(i_RegValue, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + i_Event2Status = 1; + /*****************************************************************/ + /* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */ + /*****************************************************************/ + + outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /*****************/ + /* Enable Port B */ + /*****************/ + + outb(0xF4, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + } // if (data[1] == APCI1500_OR) + else { + printk("\nThe choice for interrupt logic does not exist\n"); + return -EINVAL; + } //elseif (data[1] == APCI1500_OR) + } //if(data[0]==2) + + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1500_StartStopInputEvent | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Allows or disallows a port event | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT ui_Channel : Channel number to read | +| lsampl_t *data : Data Pointer to read status | + data[0] :0 Start input event + 1 Stop input event + data[1] :No of port (1 or 2) ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +int i_APCI1500_StartStopInputEvent(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + int i_Event1InterruptStatus = 0, i_Event2InterruptStatus = + 0, i_RegValue; + switch (data[0]) { + case START: + /*************************/ + /* Tests the port number */ + /*************************/ + + if (data[1] == 1 || data[1] == 2) { + /***************************/ + /* Test if port 1 selected */ + /***************************/ + + if (data[1] == 1) { + /*****************************/ + /* Test if event initialised */ + /*****************************/ + if (i_Event1Status == 1) { + /*****************************************************************/ + /* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */ + /*****************************************************************/ + outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /******************/ + /* Disable Port A */ + /******************/ + outb(0xF0, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /***************************************************/ + /* Selects the command and status register of */ + /* port 1 */ + /***************************************************/ + outb(APCI1500_RW_PORT_A_COMMAND_AND_STATUS, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /*************************************/ + /* Allows the pattern interrupt */ + /*************************************/ + outb(0xC0, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /*****************************************************************/ + /* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */ + /*****************************************************************/ + outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /*****************/ + /* Enable Port A */ + /*****************/ + outb(0xF4, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + i_Event1InterruptStatus = 1; + outb(APCI1500_RW_PORT_A_SPECIFICATION, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + i_RegValue = + inb(devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /* Selects the master interrupt control register */ + /*************************************************/ + outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /**********************************************/ + /* Authorizes the main interrupt on the board */ + /**********************************************/ + outb(0xD0, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + } // if(i_Event1Status==1) + else { + printk("\nEvent 1 not initialised\n"); + return -EINVAL; + } //else if(i_Event1Status==1) + } //if (data[1]==1) + if (data[1] == 2) { + + if (i_Event2Status == 1) { + /*****************************************************************/ + /* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */ + /*****************************************************************/ + outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /******************/ + /* Disable Port B */ + /******************/ + outb(0x74, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /***************************************************/ + /* Selects the command and status register of */ + /* port 2 */ + /***************************************************/ + outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /*************************************/ + /* Allows the pattern interrupt */ + /*************************************/ + outb(0xC0, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /*****************************************************************/ + /* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */ + /*****************************************************************/ + outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /*****************/ + /* Enable Port B */ + /*****************/ + outb(0xF4, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /* Selects the master interrupt control register */ + /*************************************************/ + outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /**********************************************/ + /* Authorizes the main interrupt on the board */ + /**********************************************/ + outb(0xD0, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + i_Event2InterruptStatus = 1; + } // if(i_Event2Status==1) + else { + printk("\nEvent 2 not initialised\n"); + return -EINVAL; + } //else if(i_Event2Status==1) + } // if(data[1]==2) + } // if (data[1] == 1 || data[0] == 2) + else { + printk("\nThe port parameter is in error\n"); + return -EINVAL; + } //else if (data[1] == 1 || data[0] == 2) + + break; + + case STOP: + /*************************/ + /* Tests the port number */ + /*************************/ + + if (data[1] == 1 || data[1] == 2) { + /***************************/ + /* Test if port 1 selected */ + /***************************/ + + if (data[1] == 1) { + /*****************************/ + /* Test if event initialised */ + /*****************************/ + if (i_Event1Status == 1) { + /*****************************************************************/ + /* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */ + /*****************************************************************/ + outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /******************/ + /* Disable Port A */ + /******************/ + outb(0xF0, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /***************************************************/ + /* Selects the command and status register of */ + /* port 1 */ + /***************************************************/ + outb(APCI1500_RW_PORT_A_COMMAND_AND_STATUS, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /*************************************/ + /* Inhibits the pattern interrupt */ + /*************************************/ + outb(0xE0, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /*****************************************************************/ + /* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */ + /*****************************************************************/ + outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /*****************/ + /* Enable Port A */ + /*****************/ + outb(0xF4, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + i_Event1InterruptStatus = 0; + } // if(i_Event1Status==1) + else { + printk("\nEvent 1 not initialised\n"); + return -EINVAL; + } //else if(i_Event1Status==1) + } //if (data[1]==1) + if (data[1] == 2) { + /*****************************/ + /* Test if event initialised */ + /*****************************/ + if (i_Event2Status == 1) { + /*****************************************************************/ + /* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */ + /*****************************************************************/ + outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /******************/ + /* Disable Port B */ + /******************/ + outb(0x74, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /***************************************************/ + /* Selects the command and status register of */ + /* port 2 */ + /***************************************************/ + outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /*************************************/ + /* Inhibits the pattern interrupt */ + /*************************************/ + outb(0xE0, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /*****************************************************************/ + /* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */ + /*****************************************************************/ + outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /*****************/ + /* Enable Port B */ + /*****************/ + outb(0xF4, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + i_Event2InterruptStatus = 0; + } // if(i_Event2Status==1) + else { + printk("\nEvent 2 not initialised\n"); + return -EINVAL; + } //else if(i_Event2Status==1) + } //if(data[1]==2) + + } // if (data[1] == 1 || data[1] == 2) + else { + printk("\nThe port parameter is in error\n"); + return -EINVAL; + } //else if (data[1] == 1 || data[1] == 2) + break; + default: + printk("\nThe option of START/STOP logic does not exist\n"); + return -EINVAL; + } //switch(data[0]) + + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1500_Initialisation | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Return the status of the digital input | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT ui_Channel : Channel number to read | +| lsampl_t *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI1500_Initialisation(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + int i_DummyRead = 0; + /******************/ + /* Software reset */ + /******************/ + i_DummyRead = inb(devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + i_DummyRead = inb(devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + outb(1, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + + /*****************************************************/ + /* Selects the master configuration control register */ + /*****************************************************/ + outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + outb(0xF4, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + + /*****************************************************/ + /* Selects the mode specification register of port A */ + /*****************************************************/ + outb(APCI1500_RW_PORT_A_SPECIFICATION, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + outb(0x10, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + + /* Selects the data path polarity register of port A */ + outb(APCI1500_RW_PORT_A_DATA_PCITCH_POLARITY, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* High level of port A means 1 */ + outb(0xFF, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + + /* Selects the data direction register of port A */ + outb(APCI1500_RW_PORT_A_DATA_DIRECTION, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* All bits used as inputs */ + outb(0xFF, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Selects the command and status register of port A */ + outb(APCI1500_RW_PORT_A_COMMAND_AND_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deletes IP and IUS */ + outb(0x20, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Selects the command and status register of port A */ + outb(APCI1500_RW_PORT_A_COMMAND_AND_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deactivates the interrupt management of port A: */ + outb(0xE0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Selects the handshake specification register of port A */ + outb(APCI1500_RW_PORT_A_HANDSHAKE_SPECIFICATION, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deletes the register */ + outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + + /*****************************************************/ + /* Selects the mode specification register of port B */ + /*****************************************************/ + outb(APCI1500_RW_PORT_B_SPECIFICATION, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + outb(0x10, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Selects the data path polarity register of port B */ + outb(APCI1500_RW_PORT_B_DATA_PCITCH_POLARITY, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* A high level of port B means 1 */ + outb(0x7F, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Selects the data direction register of port B */ + outb(APCI1500_RW_PORT_B_DATA_DIRECTION, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* All bits used as inputs */ + outb(0xFF, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Selects the command and status register of port B */ + outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deletes IP and IUS */ + outb(0x20, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Selects the command and status register of port B */ + outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deactivates the interrupt management of port B: */ + outb(0xE0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Selects the handshake specification register of port B */ + outb(APCI1500_RW_PORT_B_HANDSHAKE_SPECIFICATION, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deletes the register */ + outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + + /*****************************************************/ + /* Selects the data path polarity register of port C */ + /*****************************************************/ + outb(APCI1500_RW_PORT_C_DATA_PCITCH_POLARITY, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* High level of port C means 1 */ + outb(0x9, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Selects the data direction register of port C */ + outb(APCI1500_RW_PORT_C_DATA_DIRECTION, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* All bits used as inputs except channel 1 */ + outb(0x0E, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Selects the special IO register of port C */ + outb(APCI1500_RW_PORT_C_SPECIAL_IO_CONTROL, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deletes it */ + outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /******************************************************/ + /* Selects the command and status register of timer 1 */ + /******************************************************/ + outb(APCI1500_RW_CPT_TMR1_CMD_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deletes IP and IUS */ + outb(0x20, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Selects the command and status register of timer 1 */ + outb(APCI1500_RW_CPT_TMR1_CMD_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deactivates the interrupt management of timer 1 */ + outb(0xE0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /******************************************************/ + /* Selects the command and status register of timer 2 */ + /******************************************************/ + outb(APCI1500_RW_CPT_TMR2_CMD_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deletes IP and IUS */ + outb(0x20, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Selects the command and status register of timer 2 */ + outb(APCI1500_RW_CPT_TMR2_CMD_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deactivates Timer 2 interrupt management: */ + outb(0xE0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /******************************************************/ + /* Selects the command and status register of timer 3 */ + /******************************************************/ + outb(APCI1500_RW_CPT_TMR3_CMD_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deletes IP and IUS */ + outb(0x20, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Selects the command and status register of Timer 3 */ + outb(APCI1500_RW_CPT_TMR3_CMD_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deactivates interrupt management of timer 3: */ + outb(0xE0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /*************************************************/ + /* Selects the master interrupt control register */ + /*************************************************/ + outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deletes all interrupts */ + outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1500_ReadMoreDigitalInput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Return the status of the Requested digital inputs | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT ui_NoOfChannels : No Of Channels To be Read | +| UINT *data : Data Pointer + data[0] : 0 Read a single channel + 1 read a port value + data[1] : port value ++----------------------------------------------------------------------------+ +| Output Parameters : -- data[0] :The read status value ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1500_ReadMoreDigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_PortValue = data[1]; + UINT ui_Mask = 0; + UINT ui_Channel; + UINT ui_TmpValue = 0; + ui_Channel = CR_CHAN(insn->chanspec); + + switch (data[0]) { + case 0: + if (ui_Channel >= 0 && ui_Channel <= 15) { + ui_TmpValue = + (UINT) inw(devpriv->i_IobaseAddon + + APCI1500_DIGITAL_IP); + *data = (ui_TmpValue >> ui_Channel) & 0x1; + } //if(ui_Channel >= 0 && ui_Channel <=15) + else { + printk("\nThe channel specification are in error\n"); + return -EINVAL; // "sorry channel spec wrong " + } //else if(ui_Channel >= 0 && ui_Channel <=15) + break; + case 1: + + *data = (UINT) inw(devpriv->i_IobaseAddon + + APCI1500_DIGITAL_IP); + switch (ui_Channel) { + case 2: + ui_Mask = 3; + *data = (*data >> (2 * ui_PortValue)) & ui_Mask; + break; + case 4: + ui_Mask = 15; + *data = (*data >> (4 * ui_PortValue)) & ui_Mask; + break; + case 8: + ui_Mask = 255; + *data = (*data >> (8 * ui_PortValue)) & ui_Mask; + break; + case 15: + break; + + default: + printk("\nSpecified channel cannot be read \n"); + return -EINVAL; // "sorry channel spec wrong " + break; + } //switch(ui_Channel) + break; + default: + printk("\nThe specified functionality does not exist\n"); + return -EINVAL; + } //switch(data[0]) + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1500_ConfigDigitalOutputErrorInterrupt + (comedi_device *dev,comedi_subdevice *s comedi_insn + *insn,lsampl_t *data) | +| | ++----------------------------------------------------------------------------+ +| Task : Configures the digital output memory and the digital + output error interrupt | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| lsampl_t *data : Data Pointer contains | +| configuration parameters as below | +| comedi_subdevice *s, :pointer to subdevice structure + comedi_insn *insn :pointer to insn structure | +| data[0] :1:Memory on | +| 0:Memory off | + data[1] :1 Enable the voltage error interrupt +| :0 Disable the voltage error interrupt | +| | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +int i_APCI1500_ConfigDigitalOutputErrorInterrupt(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + devpriv->b_OutputMemoryStatus = data[0]; + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1500_WriteDigitalOutput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Writes port value To the selected port | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT ui_NoOfChannels : No Of Channels To Write | +| UINT *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1500_WriteDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + static UINT ui_Temp = 0; + UINT ui_Temp1; + + UINT ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel + + if (!devpriv->b_OutputMemoryStatus) { + ui_Temp = 0; + + } //if(!devpriv->b_OutputMemoryStatus ) + if (data[3] == 0) { + if (data[1] == 0) { + data[0] = (data[0] << ui_NoOfChannel) | ui_Temp; + outw(data[0], + devpriv->i_IobaseAddon + APCI1500_DIGITAL_OP); + } //if(data[1]==0) + else { + if (data[1] == 1) { + switch (ui_NoOfChannel) { + + case 2: + data[0] = + (data[0] << (2 * + data[2])) | ui_Temp; + break; + + case 4: + data[0] = + (data[0] << (4 * + data[2])) | ui_Temp; + break; + + case 8: + data[0] = + (data[0] << (8 * + data[2])) | ui_Temp; + break; + + case 15: + data[0] = data[0] | ui_Temp; + break; + + default: + comedi_error(dev, " chan spec wrong"); + return -EINVAL; // "sorry channel spec wrong " + + } //switch(ui_NoOfChannels) + + outw(data[0], + devpriv->i_IobaseAddon + + APCI1500_DIGITAL_OP); + } // if(data[1]==1) + else { + printk("\nSpecified channel not supported\n"); + } //else if(data[1]==1) + } //elseif(data[1]==0) + } //if(data[3]==0) + else { + if (data[3] == 1) { + if (data[1] == 0) { + data[0] = ~data[0] & 0x1; + ui_Temp1 = 1; + ui_Temp1 = ui_Temp1 << ui_NoOfChannel; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = + (data[0] << ui_NoOfChannel) ^ + 0xffffffff; + data[0] = data[0] & ui_Temp; + outw(data[0], + devpriv->i_IobaseAddon + + APCI1500_DIGITAL_OP); + } //if(data[1]==0) + else { + if (data[1] == 1) { + switch (ui_NoOfChannel) { + + case 2: + data[0] = ~data[0] & 0x3; + ui_Temp1 = 3; + ui_Temp1 = + ui_Temp1 << 2 * data[2]; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = + ((data[0] << (2 * + data + [2])) ^ + 0xffffffff) & ui_Temp; + break; + + case 4: + data[0] = ~data[0] & 0xf; + ui_Temp1 = 15; + ui_Temp1 = + ui_Temp1 << 4 * data[2]; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = + ((data[0] << (4 * + data + [2])) ^ + 0xffffffff) & ui_Temp; + break; + + case 8: + data[0] = ~data[0] & 0xff; + ui_Temp1 = 255; + ui_Temp1 = + ui_Temp1 << 8 * data[2]; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = + ((data[0] << (8 * + data + [2])) ^ + 0xffffffff) & ui_Temp; + break; + + case 15: + break; + + default: + comedi_error(dev, + " chan spec wrong"); + return -EINVAL; // "sorry channel spec wrong " + + } //switch(ui_NoOfChannels) + + outw(data[0], + devpriv->i_IobaseAddon + + APCI1500_DIGITAL_OP); + } // if(data[1]==1) + else { + printk("\nSpecified channel not supported\n"); + } //else if(data[1]==1) + } //elseif(data[1]==0) + } //if(data[3]==1); + else { + printk("\nSpecified functionality does not exist\n"); + return -EINVAL; + } //if else data[3]==1) + } //if else data[3]==0) + ui_Temp = data[0]; + return (insn->n);; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1500_ConfigCounterTimerWatchdog(comedi_device + *dev,comedi_subdevice *s,comedi_insn *insn,lsampl_t *data)| +| | ++----------------------------------------------------------------------------+ +| Task : Configures The Watchdog | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| comedi_subdevice *s, :pointer to subdevice structure + comedi_insn *insn :pointer to insn structure | +| lsampl_t *data : Data Pointer to read status data[0] : 2 APCI1500_1_8_KHZ +| 1 APCI1500_3_6_KHZ | +| 0 APCI1500_115_KHZ + data[1] : 0 Counter1/Timer1 + 1 Counter2/Timer2 + 2 Counter3/Watchdog + data[2] : 0 Counter + 1 Timer/Watchdog + data[3] : This parameter has | +| two meanings. | +| - If the counter/timer | +| is used as a counter | +| the limit value of | +| the counter is given | +| | +| - If the counter/timer | +| is used as a timer, | +| the divider factor | +| for the output is | +| given. + data[4] : 0 APCI1500_CONTINUOUS + 1 APCI1500_SINGLE + data[5] : 0 Software Trigger + 1 Hardware Trigger + + data[6] :0 Software gate + 1 Hardware gate + data[7] :0 Interrupt Disable + 1 Interrupt Enable ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI1500_ConfigCounterTimerWatchdog(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + int i_TimerCounterMode, i_MasterConfiguration; + + devpriv->tsk_Current = current; + +//Selection of the input clock + if (data[0] == 0 || data[0] == 1 || data[0] == 2) { + outw(data[0], devpriv->i_IobaseAddon + APCI1500_CLK_SELECT); + } // if(data[0]==0||data[0]==1||data[0]==2) + else { + if (data[0] != 3) { + printk("\nThe option for input clock selection does not exist\n"); + return -EINVAL; + } // if(data[0]!=3) + } //elseif(data[0]==0||data[0]==1||data[0]==2) + //Select the counter/timer + switch (data[1]) { + case COUNTER1: + //selecting counter or timer + switch (data[2]) { + case 0: + data[2] = APCI1500_COUNTER; + break; + case 1: + data[2] = APCI1500_TIMER; + break; + default: + printk("\nThis choice is not a timer nor a counter\n"); + return -EINVAL; + } // switch(data[2]) + + //Selecting single or continuous mode + switch (data[4]) { + case 0: + data[4] = APCI1500_CONTINUOUS; + break; + case 1: + data[4] = APCI1500_SINGLE; + break; + default: + printk("\nThis option for single/continuous mode does not exist\n"); + return -EINVAL; + } // switch(data[4]) + + i_TimerCounterMode = data[2] | data[4] | 7; + /*************************/ + /* Test the reload value */ + /*************************/ + + if ((data[3] >= 0) && (data[3] <= 65535)) { + if (data[7] == APCI1500_ENABLE + || data[7] == APCI1500_DISABLE) { + + /************************************************/ + /* Selects the mode register of timer/counter 1 */ + /************************************************/ + outb(APCI1500_RW_CPT_TMR1_MODE_SPECIFICATION, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /***********************/ + /* Writes the new mode */ + /***********************/ + outb(i_TimerCounterMode, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /****************************************************/ + /* Selects the constant register of timer/counter 1 */ + /****************************************************/ + + outb(APCI1500_RW_CPT_TMR1_TIME_CST_LOW, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /*************************/ + /* Writes the low value */ + /*************************/ + + outb(data[3], + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /****************************************************/ + /* Selects the constant register of timer/counter 1 */ + /****************************************************/ + + outb(APCI1500_RW_CPT_TMR1_TIME_CST_HIGH, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /**************************/ + /* Writes the high value */ + /**************************/ + + data[3] = data[3] >> 8; + outb(data[3], + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /*********************************************/ + /* Selects the master configuration register */ + /*********************************************/ + + outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /**********************/ + /* Reads the register */ + /**********************/ + + i_MasterConfiguration = + inb(devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /********************************************************/ + /* Enables timer/counter 1 and triggers timer/counter 1 */ + /********************************************************/ + + i_MasterConfiguration = + i_MasterConfiguration | 0x40; + + /*********************************************/ + /* Selects the master configuration register */ + /*********************************************/ + outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /********************************/ + /* Writes the new configuration */ + /********************************/ + outb(i_MasterConfiguration, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /****************************************/ + /* Selects the commands register of */ + /* timer/counter 1 */ + /****************************************/ + + outb(APCI1500_RW_CPT_TMR1_CMD_STATUS, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /***************************/ + /* Disable timer/counter 1 */ + /***************************/ + + outb(0x0, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /****************************************/ + /* Selects the commands register of */ + /* timer/counter 1 */ + /****************************************/ + outb(APCI1500_RW_CPT_TMR1_CMD_STATUS, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /***************************/ + /* Trigger timer/counter 1 */ + /***************************/ + outb(0x2, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + } //if(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) + else { + printk("\nError in selection of interrupt enable or disable\n"); + return -EINVAL; + } //elseif(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) + } // if ((data[3]>= 0) && (data[3] <= 65535)) + else { + printk("\nError in selection of reload value\n"); + return -EINVAL; + } //else if ((data[3]>= 0) && (data[3] <= 65535)) + i_TimerCounterWatchdogInterrupt = data[7]; + i_TimerCounter1Init = 1; + break; + + case COUNTER2: //selecting counter or timer + switch (data[2]) { + case 0: + data[2] = APCI1500_COUNTER; + break; + case 1: + data[2] = APCI1500_TIMER; + break; + default: + printk("\nThis choice is not a timer nor a counter\n"); + return -EINVAL; + } // switch(data[2]) + + //Selecting single or continuous mode + switch (data[4]) { + case 0: + data[4] = APCI1500_CONTINUOUS; + break; + case 1: + data[4] = APCI1500_SINGLE; + break; + default: + printk("\nThis option for single/continuous mode does not exist\n"); + return -EINVAL; + } // switch(data[4]) + + //Selecting software or hardware trigger + switch (data[5]) { + case 0: + data[5] = APCI1500_SOFTWARE_TRIGGER; + break; + case 1: + data[5] = APCI1500_HARDWARE_TRIGGER; + break; + default: + printk("\nThis choice for software or hardware trigger does not exist\n"); + return -EINVAL; + } // switch(data[5]) + + //Selecting software or hardware gate + switch (data[6]) { + case 0: + data[6] = APCI1500_SOFTWARE_GATE; + break; + case 1: + data[6] = APCI1500_HARDWARE_GATE; + break; + default: + printk("\nThis choice for software or hardware gate does not exist\n"); + return -EINVAL; + } // switch(data[6]) + + i_TimerCounterMode = data[2] | data[4] | data[5] | data[6] | 7; + + /*************************/ + /* Test the reload value */ + /*************************/ + + if ((data[3] >= 0) && (data[3] <= 65535)) { + if (data[7] == APCI1500_ENABLE + || data[7] == APCI1500_DISABLE) { + + /************************************************/ + /* Selects the mode register of timer/counter 2 */ + /************************************************/ + outb(APCI1500_RW_CPT_TMR2_MODE_SPECIFICATION, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /***********************/ + /* Writes the new mode */ + /***********************/ + outb(i_TimerCounterMode, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /****************************************************/ + /* Selects the constant register of timer/counter 2 */ + /****************************************************/ + + outb(APCI1500_RW_CPT_TMR2_TIME_CST_LOW, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /*************************/ + /* Writes the low value */ + /*************************/ + + outb(data[3], + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /****************************************************/ + /* Selects the constant register of timer/counter 2 */ + /****************************************************/ + + outb(APCI1500_RW_CPT_TMR2_TIME_CST_HIGH, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /**************************/ + /* Writes the high value */ + /**************************/ + + data[3] = data[3] >> 8; + outb(data[3], + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /*********************************************/ + /* Selects the master configuration register */ + /*********************************************/ + + outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /**********************/ + /* Reads the register */ + /**********************/ + + i_MasterConfiguration = + inb(devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /********************************************************/ + /* Enables timer/counter 2 and triggers timer/counter 2 */ + /********************************************************/ + + i_MasterConfiguration = + i_MasterConfiguration | 0x20; + + /*********************************************/ + /* Selects the master configuration register */ + /*********************************************/ + outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /********************************/ + /* Writes the new configuration */ + /********************************/ + outb(i_MasterConfiguration, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /****************************************/ + /* Selects the commands register of */ + /* timer/counter 2 */ + /****************************************/ + + outb(APCI1500_RW_CPT_TMR2_CMD_STATUS, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /***************************/ + /* Disable timer/counter 2 */ + /***************************/ + + outb(0x0, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /****************************************/ + /* Selects the commands register of */ + /* timer/counter 2 */ + /****************************************/ + outb(APCI1500_RW_CPT_TMR2_CMD_STATUS, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /***************************/ + /* Trigger timer/counter 1 */ + /***************************/ + outb(0x2, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + } //if(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) + else { + printk("\nError in selection of interrupt enable or disable\n"); + return -EINVAL; + } //elseif(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) + } // if ((data[3]>= 0) && (data[3] <= 65535)) + else { + printk("\nError in selection of reload value\n"); + return -EINVAL; + } //else if ((data[3]>= 0) && (data[3] <= 65535)) + i_TimerCounterWatchdogInterrupt = data[7]; + i_TimerCounter2Init = 1; + break; + + case COUNTER3: //selecting counter or watchdog + switch (data[2]) { + case 0: + data[2] = APCI1500_COUNTER; + break; + case 1: + data[2] = APCI1500_WATCHDOG; + break; + default: + printk("\nThis choice is not a watchdog nor a counter\n"); + return -EINVAL; + } // switch(data[2]) + + //Selecting single or continuous mode + switch (data[4]) { + case 0: + data[4] = APCI1500_CONTINUOUS; + break; + case 1: + data[4] = APCI1500_SINGLE; + break; + default: + printk("\nThis option for single/continuous mode does not exist\n"); + return -EINVAL; + } // switch(data[4]) + + //Selecting software or hardware gate + switch (data[6]) { + case 0: + data[6] = APCI1500_SOFTWARE_GATE; + break; + case 1: + data[6] = APCI1500_HARDWARE_GATE; + break; + default: + printk("\nThis choice for software or hardware gate does not exist\n"); + return -EINVAL; + } // switch(data[6]) + + /*****************************/ + /* Test if used for watchdog */ + /*****************************/ + + if (data[2] == APCI1500_WATCHDOG) { + /*****************************/ + /* - Enables the output line */ + /* - Enables retrigger */ + /* - Pulses output */ + /*****************************/ + i_TimerCounterMode = data[2] | data[4] | 0x54; + } //if (data[2] == APCI1500_WATCHDOG) + else { + i_TimerCounterMode = data[2] | data[4] | data[6] | 7; + } //elseif (data[2] == APCI1500_WATCHDOG) + /*************************/ + /* Test the reload value */ + /*************************/ + + if ((data[3] >= 0) && (data[3] <= 65535)) { + if (data[7] == APCI1500_ENABLE + || data[7] == APCI1500_DISABLE) { + + /************************************************/ + /* Selects the mode register of watchdog/counter 3 */ + /************************************************/ + outb(APCI1500_RW_CPT_TMR3_MODE_SPECIFICATION, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /***********************/ + /* Writes the new mode */ + /***********************/ + outb(i_TimerCounterMode, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /****************************************************/ + /* Selects the constant register of watchdog/counter 3 */ + /****************************************************/ + + outb(APCI1500_RW_CPT_TMR3_TIME_CST_LOW, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /*************************/ + /* Writes the low value */ + /*************************/ + + outb(data[3], + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /****************************************************/ + /* Selects the constant register of watchdog/counter 3 */ + /****************************************************/ + + outb(APCI1500_RW_CPT_TMR3_TIME_CST_HIGH, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /**************************/ + /* Writes the high value */ + /**************************/ + + data[3] = data[3] >> 8; + outb(data[3], + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /*********************************************/ + /* Selects the master configuration register */ + /*********************************************/ + + outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /**********************/ + /* Reads the register */ + /**********************/ + + i_MasterConfiguration = + inb(devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /********************************************************/ + /* Enables watchdog/counter 3 and triggers watchdog/counter 3 */ + /********************************************************/ + + i_MasterConfiguration = + i_MasterConfiguration | 0x10; + + /*********************************************/ + /* Selects the master configuration register */ + /*********************************************/ + outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /********************************/ + /* Writes the new configuration */ + /********************************/ + outb(i_MasterConfiguration, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /********************/ + /* Test if COUNTER */ + /********************/ + if (data[2] == APCI1500_COUNTER) { + + /*************************************/ + /* Selects the command register of */ + /* watchdog/counter 3 */ + /*************************************/ + outb(APCI1500_RW_CPT_TMR3_CMD_STATUS, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /*************************************************/ + /* Disable the watchdog/counter 3 and starts it */ + /*************************************************/ + outb(0x0, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /*************************************/ + /* Selects the command register of */ + /* watchdog/counter 3 */ + /*************************************/ + + outb(APCI1500_RW_CPT_TMR3_CMD_STATUS, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /*************************************************/ + /* Trigger the watchdog/counter 3 and starts it */ + /*************************************************/ + outb(0x2, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + } //elseif(data[2]==APCI1500_COUNTER) + + } //if(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) + else { + printk("\nError in selection of interrupt enable or disable\n"); + return -EINVAL; + } //elseif(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) + } // if ((data[3]>= 0) && (data[3] <= 65535)) + else { + printk("\nError in selection of reload value\n"); + return -EINVAL; + } //else if ((data[3]>= 0) && (data[3] <= 65535)) + i_TimerCounterWatchdogInterrupt = data[7]; + i_WatchdogCounter3Init = 1; + break; + + default: + printk("\nThe specified counter\timer option does not exist\n"); + } //switch(data[1]) + i_CounterLogic = data[2]; + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1500_StartStopTriggerTimerCounterWatchdog | +| (comedi_device *dev,comedi_subdevice *s, + comedi_insn *insn,lsampl_t *data); | ++----------------------------------------------------------------------------+ +| Task : Start / Stop or trigger the timer counter or Watchdog | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| comedi_subdevice *s, :pointer to subdevice structure + comedi_insn *insn :pointer to insn structure | +| lsampl_t *data : Data Pointer to read status | + data[0] : 0 Counter1/Timer1 + 1 Counter2/Timer2 + 2 Counter3/Watchdog + data[1] : 0 start + 1 stop + 2 Trigger + data[2] : 0 Counter + 1 Timer/Watchdog ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +int i_APCI1500_StartStopTriggerTimerCounterWatchdog(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + int i_CommandAndStatusValue; + + switch (data[0]) { + case COUNTER1: + switch (data[1]) { + case START: + if (i_TimerCounter1Init == 1) { + if (i_TimerCounterWatchdogInterrupt == 1) { + i_CommandAndStatusValue = 0xC4; //Enable the interrupt + } // if(i_TimerCounterWatchdogInterrupt==1) + else { + i_CommandAndStatusValue = 0xE4; //disable the interrupt + } //elseif(i_TimerCounterWatchdogInterrupt==1) + /**************************/ + /* Starts timer/counter 1 */ + /**************************/ + i_TimerCounter1Enabled = 1; + /********************************************/ + /* Selects the commands and status register */ + /********************************************/ + outb(APCI1500_RW_CPT_TMR1_CMD_STATUS, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + outb(i_CommandAndStatusValue, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + } //if( i_TimerCounter1Init==1) + else { + printk("\nCounter/Timer1 not configured\n"); + return -EINVAL; + } + break; + + case STOP: + + /**************************/ + /* Stop timer/counter 1 */ + /**************************/ + + /********************************************/ + /* Selects the commands and status register */ + /********************************************/ + outb(APCI1500_RW_CPT_TMR1_CMD_STATUS, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + outb(0x00, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + i_TimerCounter1Enabled = 0; + break; + + case TRIGGER: + if (i_TimerCounter1Init == 1) { + if (i_TimerCounter1Enabled == 1) { + /************************/ + /* Set Trigger and gate */ + /************************/ + + i_CommandAndStatusValue = 0x6; + } //if( i_TimerCounter1Enabled==1) + else { + /***************/ + /* Set Trigger */ + /***************/ + + i_CommandAndStatusValue = 0x2; + } //elseif(i_TimerCounter1Enabled==1) + + /********************************************/ + /* Selects the commands and status register */ + /********************************************/ + outb(APCI1500_RW_CPT_TMR1_CMD_STATUS, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + outb(i_CommandAndStatusValue, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + } //if( i_TimerCounter1Init==1) + else { + printk("\nCounter/Timer1 not configured\n"); + return -EINVAL; + } + break; + + default: + printk("\nThe specified option for start/stop/trigger does not exist\n"); + return -EINVAL; + } //switch(data[1]) + break; + + case COUNTER2: + switch (data[1]) { + case START: + if (i_TimerCounter2Init == 1) { + if (i_TimerCounterWatchdogInterrupt == 1) { + i_CommandAndStatusValue = 0xC4; //Enable the interrupt + } // if(i_TimerCounterWatchdogInterrupt==1) + else { + i_CommandAndStatusValue = 0xE4; //disable the interrupt + } //elseif(i_TimerCounterWatchdogInterrupt==1) + /**************************/ + /* Starts timer/counter 2 */ + /**************************/ + i_TimerCounter2Enabled = 1; + /********************************************/ + /* Selects the commands and status register */ + /********************************************/ + outb(APCI1500_RW_CPT_TMR2_CMD_STATUS, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + outb(i_CommandAndStatusValue, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + } //if( i_TimerCounter2Init==1) + else { + printk("\nCounter/Timer2 not configured\n"); + return -EINVAL; + } + break; + + case STOP: + + /**************************/ + /* Stop timer/counter 2 */ + /**************************/ + + /********************************************/ + /* Selects the commands and status register */ + /********************************************/ + outb(APCI1500_RW_CPT_TMR2_CMD_STATUS, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + outb(0x00, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + i_TimerCounter2Enabled = 0; + break; + case TRIGGER: + if (i_TimerCounter2Init == 1) { + if (i_TimerCounter2Enabled == 1) { + /************************/ + /* Set Trigger and gate */ + /************************/ + + i_CommandAndStatusValue = 0x6; + } //if( i_TimerCounter2Enabled==1) + else { + /***************/ + /* Set Trigger */ + /***************/ + + i_CommandAndStatusValue = 0x2; + } //elseif(i_TimerCounter2Enabled==1) + + /********************************************/ + /* Selects the commands and status register */ + /********************************************/ + outb(APCI1500_RW_CPT_TMR2_CMD_STATUS, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + outb(i_CommandAndStatusValue, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + } //if( i_TimerCounter2Init==1) + else { + printk("\nCounter/Timer2 not configured\n"); + return -EINVAL; + } + break; + default: + printk("\nThe specified option for start/stop/trigger does not exist\n"); + return -EINVAL; + } //switch(data[1]) + break; + case COUNTER3: + switch (data[1]) { + case START: + if (i_WatchdogCounter3Init == 1) { + + if (i_TimerCounterWatchdogInterrupt == 1) { + i_CommandAndStatusValue = 0xC4; //Enable the interrupt + } // if(i_TimerCounterWatchdogInterrupt==1) + else { + i_CommandAndStatusValue = 0xE4; //disable the interrupt + } //elseif(i_TimerCounterWatchdogInterrupt==1) + /**************************/ + /* Starts Watchdog/counter 3 */ + /**************************/ + i_WatchdogCounter3Enabled = 1; + /********************************************/ + /* Selects the commands and status register */ + /********************************************/ + outb(APCI1500_RW_CPT_TMR3_CMD_STATUS, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + outb(i_CommandAndStatusValue, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + } // if( i_WatchdogCounter3init==1) + else { + printk("\nWatchdog/Counter3 not configured\n"); + return -EINVAL; + } + break; + + case STOP: + + /**************************/ + /* Stop Watchdog/counter 3 */ + /**************************/ + + /********************************************/ + /* Selects the commands and status register */ + /********************************************/ + outb(APCI1500_RW_CPT_TMR3_CMD_STATUS, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + outb(0x00, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + i_WatchdogCounter3Enabled = 0; + break; + + case TRIGGER: + switch (data[2]) { + case 0: //triggering counter 3 + if (i_WatchdogCounter3Init == 1) { + if (i_WatchdogCounter3Enabled == 1) { + /************************/ + /* Set Trigger and gate */ + /************************/ + + i_CommandAndStatusValue = 0x6; + } //if( i_WatchdogCounter3Enabled==1) + else { + /***************/ + /* Set Trigger */ + /***************/ + + i_CommandAndStatusValue = 0x2; + } //elseif(i_WatchdogCounter3Enabled==1) + + /********************************************/ + /* Selects the commands and status register */ + /********************************************/ + outb(APCI1500_RW_CPT_TMR3_CMD_STATUS, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + outb(i_CommandAndStatusValue, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + } //if( i_WatchdogCounter3Init==1) + else { + printk("\nCounter3 not configured\n"); + return -EINVAL; + } + break; + case 1: + //triggering Watchdog 3 + if (i_WatchdogCounter3Init == 1) { + + /********************************************/ + /* Selects the commands and status register */ + /********************************************/ + outb(APCI1500_RW_CPT_TMR3_CMD_STATUS, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + outb(0x6, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + } //if( i_WatchdogCounter3Init==1) + else { + printk("\nWatchdog 3 not configured\n"); + return -EINVAL; + } + break; + default: + printk("\nWrong choice of watchdog/counter3\n"); + return -EINVAL; + } //switch(data[2]) + break; + default: + printk("\nThe specified option for start/stop/trigger does not exist\n"); + return -EINVAL; + } //switch(data[1]) + break; + default: + printk("\nThe specified choice for counter/watchdog/timer does not exist\n"); + return -EINVAL; + } //switch(data[0]) + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1500_ReadCounterTimerWatchdog | +| (comedi_device *dev,comedi_subdevice *s,comedi_insn *insn, + lsampl_t *data); | ++----------------------------------------------------------------------------+ +| Task : Read The Watchdog | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| comedi_subdevice *s, :pointer to subdevice structure + comedi_insn *insn :pointer to insn structure | +| lsampl_t *data : Data Pointer to read status | + data[0] : 0 Counter1/Timer1 + 1 Counter2/Timer2 + 2 Counter3/Watchdog + ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI1500_ReadCounterTimerWatchdog(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + int i_CommandAndStatusValue; + switch (data[0]) { + case COUNTER1: + //Read counter/timer1 + if (i_TimerCounter1Init == 1) { + if (i_TimerCounter1Enabled == 1) { + /************************/ + /* Set RCC and gate */ + /************************/ + + i_CommandAndStatusValue = 0xC; + } //if( i_TimerCounter1Init==1) + else { + /***************/ + /* Set RCC */ + /***************/ + + i_CommandAndStatusValue = 0x8; + } //elseif(i_TimerCounter1Init==1) + + /********************************************/ + /* Selects the commands and status register */ + /********************************************/ + outb(APCI1500_RW_CPT_TMR1_CMD_STATUS, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + outb(i_CommandAndStatusValue, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /***************************************/ + /* Selects the counter register (high) */ + /***************************************/ + outb(APCI1500_R_CPT_TMR1_VALUE_HIGH, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + data[0] = + inb(devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + data[0] = data[0] << 8; + data[0] = data[0] & 0xff00; + outb(APCI1500_R_CPT_TMR1_VALUE_LOW, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + data[0] = + data[0] | inb(devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + } //if( i_TimerCounter1Init==1) + else { + printk("\nTimer/Counter1 not configured\n"); + return -EINVAL; + } //elseif( i_TimerCounter1Init==1) + break; + case COUNTER2: + //Read counter/timer2 + if (i_TimerCounter2Init == 1) { + if (i_TimerCounter2Enabled == 1) { + /************************/ + /* Set RCC and gate */ + /************************/ + + i_CommandAndStatusValue = 0xC; + } //if( i_TimerCounter2Init==1) + else { + /***************/ + /* Set RCC */ + /***************/ + + i_CommandAndStatusValue = 0x8; + } //elseif(i_TimerCounter2Init==1) + + /********************************************/ + /* Selects the commands and status register */ + /********************************************/ + outb(APCI1500_RW_CPT_TMR2_CMD_STATUS, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + outb(i_CommandAndStatusValue, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /***************************************/ + /* Selects the counter register (high) */ + /***************************************/ + outb(APCI1500_R_CPT_TMR2_VALUE_HIGH, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + data[0] = + inb(devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + data[0] = data[0] << 8; + data[0] = data[0] & 0xff00; + outb(APCI1500_R_CPT_TMR2_VALUE_LOW, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + data[0] = + data[0] | inb(devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + } //if( i_TimerCounter2Init==1) + else { + printk("\nTimer/Counter2 not configured\n"); + return -EINVAL; + } //elseif( i_TimerCounter2Init==1) + break; + case COUNTER3: + //Read counter/watchdog2 + if (i_WatchdogCounter3Init == 1) { + if (i_WatchdogCounter3Enabled == 1) { + /************************/ + /* Set RCC and gate */ + /************************/ + + i_CommandAndStatusValue = 0xC; + } //if( i_TimerCounter2Init==1) + else { + /***************/ + /* Set RCC */ + /***************/ + + i_CommandAndStatusValue = 0x8; + } //elseif(i_WatchdogCounter3Init==1) + + /********************************************/ + /* Selects the commands and status register */ + /********************************************/ + outb(APCI1500_RW_CPT_TMR3_CMD_STATUS, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + outb(i_CommandAndStatusValue, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /***************************************/ + /* Selects the counter register (high) */ + /***************************************/ + outb(APCI1500_R_CPT_TMR3_VALUE_HIGH, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + data[0] = + inb(devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + data[0] = data[0] << 8; + data[0] = data[0] & 0xff00; + outb(APCI1500_R_CPT_TMR3_VALUE_LOW, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + data[0] = + data[0] | inb(devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + } //if( i_WatchdogCounter3Init==1) + else { + printk("\nWatchdogCounter3 not configured\n"); + return -EINVAL; + } //elseif( i_WatchdogCounter3Init==1) + break; + default: + printk("\nThe choice of timer/counter/watchdog does not exist\n"); + return -EINVAL; + } //switch(data[0]) + + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1500_ReadInterruptMask | +| (comedi_device *dev,comedi_subdevice *s,comedi_insn *insn, + lsampl_t *data); | ++----------------------------------------------------------------------------+ +| Task : Read the interrupt mask | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| comedi_subdevice *s, :pointer to subdevice structure + comedi_insn *insn :pointer to insn structure | +| lsampl_t *data : Data Pointer to read status | + + ++----------------------------------------------------------------------------+ +| Output Parameters : -- data[0]:The interrupt mask value data[1]:Channel no ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +int i_APCI1500_ReadInterruptMask(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + data[0] = i_InterruptMask; + data[1] = i_InputChannel; + i_InterruptMask = 0; + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1500_ConfigureInterrupt | +| (comedi_device *dev,comedi_subdevice *s,comedi_insn *insn, + lsampl_t *data); | ++----------------------------------------------------------------------------+ +| Task : Configures the interrupt registers | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| comedi_subdevice *s, :pointer to subdevice structure + comedi_insn *insn :pointer to insn structure | +| lsampl_t *data : Data Pointer | + + ++----------------------------------------------------------------------------+ +| Output Parameters : -- ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +int i_APCI1500_ConfigureInterrupt(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_Status; + int i_RegValue; + int i_Constant; + devpriv->tsk_Current = current; + outl(0x0, devpriv->i_IobaseAmcc + 0x38); + if (data[0] == 1) { + i_Constant = 0xC0; + } //if(data[0]==1) + else { + if (data[0] == 0) { + i_Constant = 0x00; + } //if{data[0]==0) + else { + printk("\nThe parameter passed to driver is in error for enabling the voltage interrupt\n"); + return -EINVAL; + } //else if(data[0]==0) + } //elseif(data[0]==1) + + /*****************************************************/ + /* Selects the mode specification register of port B */ + /*****************************************************/ + outb(APCI1500_RW_PORT_B_SPECIFICATION, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + i_RegValue = inb(devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + outb(APCI1500_RW_PORT_B_SPECIFICATION, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /*********************************************/ + /* Writes the new configuration (APCI1500_OR) */ + /*********************************************/ + i_RegValue = (i_RegValue & 0xF9) | APCI1500_OR; + + outb(i_RegValue, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /*****************************************************/ + /* Selects the command and status register of port B */ + /*****************************************************/ + outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /*****************************************/ + /* Authorises the interrupt on the board */ + /*****************************************/ + outb(0xC0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /***************************************************/ + /* Selects the pattern polarity register of port B */ + /***************************************************/ + outb(APCI1500_RW_PORT_B_PATTERN_POLARITY, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + outb(i_Constant, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /*****************************************************/ + /* Selects the pattern transition register of port B */ + /*****************************************************/ + outb(APCI1500_RW_PORT_B_PATTERN_TRANSITION, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + outb(i_Constant, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /***********************************************/ + /* Selects the pattern mask register of port B */ + /***********************************************/ + outb(APCI1500_RW_PORT_B_PATTERN_MASK, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + outb(i_Constant, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + + /*****************************************************/ + /* Selects the command and status register of port A */ + /*****************************************************/ + outb(APCI1500_RW_PORT_A_COMMAND_AND_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + i_RegValue = inb(devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + outb(APCI1500_RW_PORT_A_COMMAND_AND_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /***********************************/ + /* Deletes the interrupt of port A */ + /***********************************/ + + i_RegValue = (i_RegValue & 0x0F) | 0x20; + outb(i_RegValue, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /*****************************************************/ + /* Selects the command and status register of port B */ + /*****************************************************/ + outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + i_RegValue = inb(devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /***********************************/ + /* Deletes the interrupt of port B */ + /***********************************/ + + i_RegValue = (i_RegValue & 0x0F) | 0x20; + outb(i_RegValue, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + + /*****************************************************/ + /* Selects the command and status register of timer 1 */ + /*****************************************************/ + outb(APCI1500_RW_CPT_TMR1_CMD_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + i_RegValue = inb(devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + outb(APCI1500_RW_CPT_TMR1_CMD_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /***********************************/ + /* Deletes the interrupt of timer 1 */ + /***********************************/ + + i_RegValue = (i_RegValue & 0x0F) | 0x20; + outb(i_RegValue, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + + /*****************************************************/ + /* Selects the command and status register of timer 2 */ + /*****************************************************/ + outb(APCI1500_RW_CPT_TMR2_CMD_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + i_RegValue = inb(devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + outb(APCI1500_RW_CPT_TMR2_CMD_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /***********************************/ + /* Deletes the interrupt of timer 2 */ + /***********************************/ + + i_RegValue = (i_RegValue & 0x0F) | 0x20; + outb(i_RegValue, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + + /*****************************************************/ + /* Selects the command and status register of timer 3 */ + /*****************************************************/ + outb(APCI1500_RW_CPT_TMR3_CMD_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + i_RegValue = inb(devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + outb(APCI1500_RW_CPT_TMR3_CMD_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /***********************************/ + /* Deletes the interrupt of timer 3 */ + /***********************************/ + + i_RegValue = (i_RegValue & 0x0F) | 0x20; + outb(i_RegValue, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + + /*************************************************/ + /* Selects the master interrupt control register */ + /*************************************************/ + outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /**********************************************/ + /* Authorizes the main interrupt on the board */ + /**********************************************/ + outb(0xD0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + + /***************************/ + /* Enables the PCI interrupt */ + /*****************************/ + outl(0x3000, devpriv->i_IobaseAmcc + 0x38); + ui_Status = inl(devpriv->i_IobaseAmcc + 0x10); + ui_Status = inl(devpriv->i_IobaseAmcc + 0x38); + outl(0x23000, devpriv->i_IobaseAmcc + 0x38); + + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : static void v_APCI1500_Interrupt | +| (int irq , void *d) | ++----------------------------------------------------------------------------+ +| Task : Interrupt handler | ++----------------------------------------------------------------------------+ +| Input Parameters : int irq : irq number | +| void *d : void pointer | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +static VOID v_APCI1500_Interrupt(int irq, void *d) +{ + + comedi_device *dev = d; + UINT ui_InterruptStatus = 0; + int i_RegValue = 0; + i_InterruptMask = 0; + + /***********************************/ + /* Read the board interrupt status */ + /***********************************/ + ui_InterruptStatus = inl(devpriv->i_IobaseAmcc + 0x38); + + /***************************************/ + /* Test if board generated a interrupt */ + /***************************************/ + if ((ui_InterruptStatus & 0x800000) == 0x800000) { + /************************/ + /* Disable all Interrupt */ + /************************/ + /*************************************************/ + /* Selects the master interrupt control register */ + /*************************************************/ + //outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL,devpriv->iobase+APCI1500_Z8536_CONTROL_REGISTER); + /**********************************************/ + /* Disables the main interrupt on the board */ + /**********************************************/ + //outb(0x00,devpriv->iobase+APCI1500_Z8536_CONTROL_REGISTER); + + /*****************************************************/ + /* Selects the command and status register of port A */ + /*****************************************************/ + outb(APCI1500_RW_PORT_A_COMMAND_AND_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + i_RegValue = + inb(devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + if ((i_RegValue & 0x60) == 0x60) { + /*****************************************************/ + /* Selects the command and status register of port A */ + /*****************************************************/ + outb(APCI1500_RW_PORT_A_COMMAND_AND_STATUS, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /***********************************/ + /* Deletes the interrupt of port A */ + /***********************************/ + i_RegValue = (i_RegValue & 0x0F) | 0x20; + outb(i_RegValue, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + i_InterruptMask = i_InterruptMask | 1; + if (i_Logic == APCI1500_OR_PRIORITY) { + outb(APCI1500_RW_PORT_A_SPECIFICATION, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + i_RegValue = + inb(devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + /***************************************************/ + /* Selects the interrupt vector register of port A */ + /***************************************************/ + outb(APCI1500_RW_PORT_A_INTERRUPT_CONTROL, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + i_RegValue = + inb(devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + + i_InputChannel = 1 + (i_RegValue >> 1); + + } // if(i_Logic==APCI1500_OR_PRIORITY) + else { + i_InputChannel = 0; + } //elseif(i_Logic==APCI1500_OR_PRIORITY) + } // if ((i_RegValue & 0x60) == 0x60) + + /*****************************************************/ + /* Selects the command and status register of port B */ + /*****************************************************/ + outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + i_RegValue = + inb(devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + if ((i_RegValue & 0x60) == 0x60) { + /*****************************************************/ + /* Selects the command and status register of port B */ + /*****************************************************/ + outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /***********************************/ + /* Deletes the interrupt of port B */ + /***********************************/ + i_RegValue = (i_RegValue & 0x0F) | 0x20; + outb(i_RegValue, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + printk("\n\n\n"); + /****************/ + /* Reads port B */ + /****************/ + i_RegValue = + inb((UINT) devpriv->iobase + + APCI1500_Z8536_PORT_B); + + i_RegValue = i_RegValue & 0xC0; + /**************************************/ + /* Tests if this is an external error */ + /**************************************/ + + if (i_RegValue) { + //Disable the interrupt + /*****************************************************/ + /* Selects the command and status register of port B */ + /*****************************************************/ + outl(0x0, devpriv->i_IobaseAmcc + 0x38); + + if (i_RegValue & 0x80) { + i_InterruptMask = + i_InterruptMask | 0x40; + } //if (i_RegValue & 0x80) + + if (i_RegValue & 0x40) { + i_InterruptMask = + i_InterruptMask | 0x80; + } //if (i_RegValue & 0x40) + } // if (i_RegValue) + else { + i_InterruptMask = i_InterruptMask | 2; + } // if (i_RegValue) + } //if ((i_RegValue & 0x60) == 0x60) + + /*****************************************************/ + /* Selects the command and status register of timer 1 */ + /*****************************************************/ + outb(APCI1500_RW_CPT_TMR1_CMD_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + i_RegValue = + inb(devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + if ((i_RegValue & 0x60) == 0x60) { + /*****************************************************/ + /* Selects the command and status register of timer 1 */ + /*****************************************************/ + outb(APCI1500_RW_CPT_TMR1_CMD_STATUS, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /***********************************/ + /* Deletes the interrupt of timer 1 */ + /***********************************/ + i_RegValue = (i_RegValue & 0x0F) | 0x20; + outb(i_RegValue, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + i_InterruptMask = i_InterruptMask | 4; + } // if ((i_RegValue & 0x60) == 0x60) + /*****************************************************/ + /* Selects the command and status register of timer 2 */ + /*****************************************************/ + outb(APCI1500_RW_CPT_TMR2_CMD_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + i_RegValue = + inb(devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + if ((i_RegValue & 0x60) == 0x60) { + /*****************************************************/ + /* Selects the command and status register of timer 2 */ + /*****************************************************/ + outb(APCI1500_RW_CPT_TMR2_CMD_STATUS, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /***********************************/ + /* Deletes the interrupt of timer 2 */ + /***********************************/ + i_RegValue = (i_RegValue & 0x0F) | 0x20; + outb(i_RegValue, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + i_InterruptMask = i_InterruptMask | 8; + } // if ((i_RegValue & 0x60) == 0x60) + + /*****************************************************/ + /* Selects the command and status register of timer 3 */ + /*****************************************************/ + outb(APCI1500_RW_CPT_TMR3_CMD_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + i_RegValue = + inb(devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + if ((i_RegValue & 0x60) == 0x60) { + /*****************************************************/ + /* Selects the command and status register of timer 3 */ + /*****************************************************/ + outb(APCI1500_RW_CPT_TMR3_CMD_STATUS, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + /***********************************/ + /* Deletes the interrupt of timer 3 */ + /***********************************/ + i_RegValue = (i_RegValue & 0x0F) | 0x20; + outb(i_RegValue, + devpriv->iobase + + APCI1500_Z8536_CONTROL_REGISTER); + if (i_CounterLogic == APCI1500_COUNTER) { + i_InterruptMask = i_InterruptMask | 0x10; + } //if(i_CounterLogic==APCI1500_COUNTER) + else { + i_InterruptMask = i_InterruptMask | 0x20; + } + } // if ((i_RegValue & 0x60) == 0x60) + + send_sig(SIGIO, devpriv->tsk_Current, 0); // send signal to the sample + /***********************/ + /* Enable all Interrupts */ + /***********************/ + + /*************************************************/ + /* Selects the master interrupt control register */ + /*************************************************/ + outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /**********************************************/ + /* Authorizes the main interrupt on the board */ + /**********************************************/ + outb(0xD0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + } // if ((ui_InterruptStatus & 0x800000) == 0x800000) + else { + printk("\nInterrupt from unknown source\n"); + + } //else if ((ui_InterruptStatus & 0x800000) == 0x800000) + return; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1500_Reset(comedi_device *dev) | | ++----------------------------------------------------------------------------+ +| Task :resets all the registers | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1500_Reset(comedi_device * dev) +{ + int i_DummyRead = 0; + i_TimerCounter1Init = 0; + i_TimerCounter2Init = 0; + i_WatchdogCounter3Init = 0; + i_Event1Status = 0; + i_Event2Status = 0; + i_TimerCounterWatchdogInterrupt = 0; + i_Logic = 0; + i_CounterLogic = 0; + i_InterruptMask = 0; + i_InputChannel = 0;; + i_TimerCounter1Enabled = 0; + i_TimerCounter2Enabled = 0; + i_WatchdogCounter3Enabled = 0; + + /******************/ + /* Software reset */ + /******************/ + i_DummyRead = inb(devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + i_DummyRead = inb(devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + outb(1, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + + /*****************************************************/ + /* Selects the master configuration control register */ + /*****************************************************/ + outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + outb(0xF4, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + + /*****************************************************/ + /* Selects the mode specification register of port A */ + /*****************************************************/ + outb(APCI1500_RW_PORT_A_SPECIFICATION, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + outb(0x10, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + + /* Selects the data path polarity register of port A */ + outb(APCI1500_RW_PORT_A_DATA_PCITCH_POLARITY, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* High level of port A means 1 */ + outb(0xFF, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + + /* Selects the data direction register of port A */ + outb(APCI1500_RW_PORT_A_DATA_DIRECTION, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* All bits used as inputs */ + outb(0xFF, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Selects the command and status register of port A */ + outb(APCI1500_RW_PORT_A_COMMAND_AND_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deletes IP and IUS */ + outb(0x20, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Selects the command and status register of port A */ + outb(APCI1500_RW_PORT_A_COMMAND_AND_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deactivates the interrupt management of port A: */ + outb(0xE0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Selects the handshake specification register of port A */ + outb(APCI1500_RW_PORT_A_HANDSHAKE_SPECIFICATION, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deletes the register */ + outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + + /*****************************************************/ + /* Selects the mode specification register of port B */ + /*****************************************************/ + outb(APCI1500_RW_PORT_B_SPECIFICATION, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + outb(0x10, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Selects the data path polarity register of port B */ + outb(APCI1500_RW_PORT_B_DATA_PCITCH_POLARITY, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* A high level of port B means 1 */ + outb(0x7F, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Selects the data direction register of port B */ + outb(APCI1500_RW_PORT_B_DATA_DIRECTION, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* All bits used as inputs */ + outb(0xFF, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Selects the command and status register of port B */ + outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deletes IP and IUS */ + outb(0x20, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Selects the command and status register of port B */ + outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deactivates the interrupt management of port B: */ + outb(0xE0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Selects the handshake specification register of port B */ + outb(APCI1500_RW_PORT_B_HANDSHAKE_SPECIFICATION, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deletes the register */ + outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + + /*****************************************************/ + /* Selects the data path polarity register of port C */ + /*****************************************************/ + outb(APCI1500_RW_PORT_C_DATA_PCITCH_POLARITY, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* High level of port C means 1 */ + outb(0x9, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Selects the data direction register of port C */ + outb(APCI1500_RW_PORT_C_DATA_DIRECTION, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* All bits used as inputs except channel 1 */ + outb(0x0E, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Selects the special IO register of port C */ + outb(APCI1500_RW_PORT_C_SPECIAL_IO_CONTROL, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deletes it */ + outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /******************************************************/ + /* Selects the command and status register of timer 1 */ + /******************************************************/ + outb(APCI1500_RW_CPT_TMR1_CMD_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deletes IP and IUS */ + outb(0x20, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Selects the command and status register of timer 1 */ + outb(APCI1500_RW_CPT_TMR1_CMD_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deactivates the interrupt management of timer 1 */ + outb(0xE0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /******************************************************/ + /* Selects the command and status register of timer 2 */ + /******************************************************/ + outb(APCI1500_RW_CPT_TMR2_CMD_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deletes IP and IUS */ + outb(0x20, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Selects the command and status register of timer 2 */ + outb(APCI1500_RW_CPT_TMR2_CMD_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deactivates Timer 2 interrupt management: */ + outb(0xE0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /******************************************************/ + /* Selects the command and status register of timer 3 */ + /******************************************************/ + outb(APCI1500_RW_CPT_TMR3_CMD_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deletes IP and IUS */ + outb(0x20, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Selects the command and status register of Timer 3 */ + outb(APCI1500_RW_CPT_TMR3_CMD_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deactivates interrupt management of timer 3: */ + outb(0xE0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /*************************************************/ + /* Selects the master interrupt control register */ + /*************************************************/ + outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /* Deletes all interrupts */ + outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + //reset all the digital outputs + outw(0x0, devpriv->i_IobaseAddon + APCI1500_DIGITAL_OP); +/*******************************/ +/* Disable the board interrupt */ +/*******************************/ + /*************************************************/ + /* Selects the master interrupt control register */ + /*************************************************/ + outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); +/****************************/ +/* Deactivates all interrupts */ +/******************************/ + outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + /*****************************************************/ + /* Selects the command and status register of port A */ + /*****************************************************/ + outb(APCI1500_RW_PORT_A_COMMAND_AND_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); +/****************************/ +/* Deactivates all interrupts */ +/******************************/ + outb(0x00, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); +/*****************************************************/ + /* Selects the command and status register of port B */ + /*****************************************************/ + outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); +/****************************/ +/* Deactivates all interrupts */ +/******************************/ + outb(0x00, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); +/*****************************************************/ + /* Selects the command and status register of timer 1 */ + /*****************************************************/ + outb(APCI1500_RW_CPT_TMR1_CMD_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); +/****************************/ +/* Deactivates all interrupts */ +/******************************/ + outb(0x00, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); +/*****************************************************/ + /* Selects the command and status register of timer 2 */ + /*****************************************************/ + outb(APCI1500_RW_CPT_TMR2_CMD_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); +/****************************/ +/* Deactivates all interrupts */ +/******************************/ + outb(0x00, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); +/*****************************************************/ +/* Selects the command and status register of timer 3*/ +/*****************************************************/ + outb(APCI1500_RW_CPT_TMR3_CMD_STATUS, + devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); +/****************************/ +/* Deactivates all interrupts */ +/******************************/ + outb(0x00, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); + return 0; +} --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.h @@ -0,0 +1,157 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ + +/********* Definitions for APCI-1500 card *****/ + +// Card Specific information +#define APCI1500_BOARD_VENDOR_ID 0x10e8 +#define APCI1500_ADDRESS_RANGE 4 + +//DIGITAL INPUT-OUTPUT DEFINE + +#define APCI1500_DIGITAL_OP 2 +#define APCI1500_DIGITAL_IP 0 +#define APCI1500_AND 2 +#define APCI1500_OR 4 +#define APCI1500_OR_PRIORITY 6 +#define APCI1500_CLK_SELECT 0 +#define COUNTER1 0 +#define COUNTER2 1 +#define COUNTER3 2 +#define APCI1500_COUNTER 0x20 +#define APCI1500_TIMER 0 +#define APCI1500_WATCHDOG 0 +#define APCI1500_SINGLE 0 +#define APCI1500_CONTINUOUS 0x80 +#define APCI1500_DISABLE 0 +#define APCI1500_ENABLE 1 +#define APCI1500_SOFTWARE_TRIGGER 0x4 +#define APCI1500_HARDWARE_TRIGGER 0x10 +#define APCI1500_SOFTWARE_GATE 0 +#define APCI1500_HARDWARE_GATE 0x8 +#define START 0 +#define STOP 1 +#define TRIGGER 2 + /**************************/ + /* Zillog I/O enumeration */ + /**************************/ +enum { + APCI1500_Z8536_PORT_C, + APCI1500_Z8536_PORT_B, + APCI1500_Z8536_PORT_A, + APCI1500_Z8536_CONTROL_REGISTER +}; + + /******************************/ + /* Z8536 CIO Internal Address */ + /******************************/ + +enum { + APCI1500_RW_MASTER_INTERRUPT_CONTROL, + APCI1500_RW_MASTER_CONFIGURATION_CONTROL, + APCI1500_RW_PORT_A_INTERRUPT_CONTROL, + APCI1500_RW_PORT_B_INTERRUPT_CONTROL, + APCI1500_RW_TIMER_COUNTER_INTERRUPT_VECTOR, + APCI1500_RW_PORT_C_DATA_PCITCH_POLARITY, + APCI1500_RW_PORT_C_DATA_DIRECTION, + APCI1500_RW_PORT_C_SPECIAL_IO_CONTROL, + + APCI1500_RW_PORT_A_COMMAND_AND_STATUS, + APCI1500_RW_PORT_B_COMMAND_AND_STATUS, + APCI1500_RW_CPT_TMR1_CMD_STATUS, + APCI1500_RW_CPT_TMR2_CMD_STATUS, + APCI1500_RW_CPT_TMR3_CMD_STATUS, + APCI1500_RW_PORT_A_DATA, + APCI1500_RW_PORT_B_DATA, + APCI1500_RW_PORT_C_DATA, + + APCI1500_R_CPT_TMR1_VALUE_HIGH, + APCI1500_R_CPT_TMR1_VALUE_LOW, + APCI1500_R_CPT_TMR2_VALUE_HIGH, + APCI1500_R_CPT_TMR2_VALUE_LOW, + APCI1500_R_CPT_TMR3_VALUE_HIGH, + APCI1500_R_CPT_TMR3_VALUE_LOW, + APCI1500_RW_CPT_TMR1_TIME_CST_HIGH, + APCI1500_RW_CPT_TMR1_TIME_CST_LOW, + APCI1500_RW_CPT_TMR2_TIME_CST_HIGH, + APCI1500_RW_CPT_TMR2_TIME_CST_LOW, + APCI1500_RW_CPT_TMR3_TIME_CST_HIGH, + APCI1500_RW_CPT_TMR3_TIME_CST_LOW, + APCI1500_RW_CPT_TMR1_MODE_SPECIFICATION, + APCI1500_RW_CPT_TMR2_MODE_SPECIFICATION, + APCI1500_RW_CPT_TMR3_MODE_SPECIFICATION, + APCI1500_R_CURRENT_VECTOR, + + APCI1500_RW_PORT_A_SPECIFICATION, + APCI1500_RW_PORT_A_HANDSHAKE_SPECIFICATION, + APCI1500_RW_PORT_A_DATA_PCITCH_POLARITY, + APCI1500_RW_PORT_A_DATA_DIRECTION, + APCI1500_RW_PORT_A_SPECIAL_IO_CONTROL, + APCI1500_RW_PORT_A_PATTERN_POLARITY, + APCI1500_RW_PORT_A_PATTERN_TRANSITION, + APCI1500_RW_PORT_A_PATTERN_MASK, + + APCI1500_RW_PORT_B_SPECIFICATION, + APCI1500_RW_PORT_B_HANDSHAKE_SPECIFICATION, + APCI1500_RW_PORT_B_DATA_PCITCH_POLARITY, + APCI1500_RW_PORT_B_DATA_DIRECTION, + APCI1500_RW_PORT_B_SPECIAL_IO_CONTROL, + APCI1500_RW_PORT_B_PATTERN_POLARITY, + APCI1500_RW_PORT_B_PATTERN_TRANSITION, + APCI1500_RW_PORT_B_PATTERN_MASK +}; + + /*----------DIGITAL INPUT----------------*/ +static int i_APCI1500_Initialisation(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int i_APCI1500_ConfigDigitalInputEvent(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + +static int i_APCI1500_StartStopInputEvent(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); +static int i_APCI1500_ReadMoreDigitalInput(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + +/*---------- DIGITAL OUTPUT------------*/ +static int i_APCI1500_ConfigDigitalOutputErrorInterrupt(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); +static int i_APCI1500_WriteDigitalOutput(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + +/*----------TIMER----------------*/ +static int i_APCI1500_ConfigCounterTimerWatchdog(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); +static int i_APCI1500_StartStopTriggerTimerCounterWatchdog(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); +static int i_APCI1500_ReadCounterTimerWatchdog(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); +static int i_APCI1500_ReadInterruptMask(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + +/*----------INTERRUPT HANDLER------*/ +static void v_APCI1500_Interrupt(int irq, void *d); +static int i_APCI1500_ConfigureInterrupt(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); +/*----------RESET---------------*/ +static int i_APCI1500_Reset(comedi_device * dev); --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.c @@ -0,0 +1,542 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-------------------------------+---------------------------------------+ + | Project : APCI-1516 | Compiler : GCC | + | Module name : hwdrv_apci1516.c| Version : 2.96 | + +-------------------------------+---------------------------------------+ + | Project manager: Eric Stolz | Date : 02/12/2002 | + +-------------------------------+---------------------------------------+ + | Description : Hardware Layer Acces For APCI-1516 | + +-----------------------------------------------------------------------+ + | UPDATES | + +----------+-----------+------------------------------------------------+ + | Date | Author | Description of updates | + +----------+-----------+------------------------------------------------+ + | | | | + | | | | + | | | | + +----------+-----------+------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Included files | ++----------------------------------------------------------------------------+ +*/ +#include "hwdrv_apci1516.h" + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1516_Read1DigitalInput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Return the status of the digital input | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| comedi_subdevice *s, :pointer to subdevice structure + comedi_insn *insn :pointer to insn structure | +| lsampl_t *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI1516_Read1DigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_TmpValue = 0; + UINT ui_Channel; + ui_Channel = CR_CHAN(insn->chanspec); + if (ui_Channel >= 0 && ui_Channel <= 7) { + ui_TmpValue = (UINT) inw(devpriv->iobase + APCI1516_DIGITAL_IP); + // since only 1 channel reqd to bring it to last bit it is rotated + // 8 +(chan - 1) times then ANDed with 1 for last bit. + *data = (ui_TmpValue >> ui_Channel) & 0x1; + } //if(ui_Channel >= 0 && ui_Channel <=7) + else { + //comedi_error(dev," \n chan spec wrong\n"); + return -EINVAL; // "sorry channel spec wrong " + } //else if(ui_Channel >= 0 && ui_Channel <=7) + + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1516_ReadMoreDigitalInput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Return the status of the Requested digital inputs | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| comedi_subdevice *s, :pointer to subdevice structure + comedi_insn *insn :pointer to insn structure | +| lsampl_t *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1516_ReadMoreDigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + + UINT ui_PortValue = data[0]; + UINT ui_Mask = 0; + UINT ui_NoOfChannels; + + ui_NoOfChannels = CR_CHAN(insn->chanspec); + + *data = (UINT) inw(devpriv->iobase + APCI1516_DIGITAL_IP); + switch (ui_NoOfChannels) { + case 2: + ui_Mask = 3; + *data = (*data >> (2 * ui_PortValue)) & ui_Mask; + break; + case 4: + ui_Mask = 15; + *data = (*data >> (4 * ui_PortValue)) & ui_Mask; + break; + case 7: + break; + + default: + printk("\nWrong parameters\n"); + return -EINVAL; // "sorry channel spec wrong " + break; + } //switch(ui_NoOfChannels) + + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1516_ConfigDigitalOutput (comedi_device *dev, + comedi_subdevice *s comedi_insn *insn,lsampl_t *data) | +| | ++----------------------------------------------------------------------------+ +| Task : Configures The Digital Output Subdevice. | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| lsampl_t *data : Data Pointer contains | +| configuration parameters as below | +| comedi_subdevice *s, :pointer to subdevice structure + comedi_insn *insn :pointer to insn structure | +| data[0] :1:Memory on | +| 0:Memory off | +| | +| | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +int i_APCI1516_ConfigDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + devpriv->b_OutputMemoryStatus = data[0]; + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1516_WriteDigitalOutput | +| (comedi_device *dev,comedi_subdevice *s,comedi_insn *insn, + lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Writes port value To the selected port | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| comedi_subdevice *s, :pointer to subdevice structure + comedi_insn *insn :pointer to insn structure | +| lsampl_t *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1516_WriteDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_Temp, ui_Temp1; + UINT ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel + + printk("EL311003 : @=%x\n", devpriv->iobase + APCI1516_DIGITAL_OP); + + if (devpriv->b_OutputMemoryStatus) { + ui_Temp = inw(devpriv->iobase + APCI1516_DIGITAL_OP); + + } //if(devpriv->b_OutputMemoryStatus ) + else { + ui_Temp = 0; + } //if(devpriv->b_OutputMemoryStatus ) + if (data[3] == 0) { + if (data[1] == 0) { + data[0] = (data[0] << ui_NoOfChannel) | ui_Temp; + outw(data[0], devpriv->iobase + APCI1516_DIGITAL_OP); + + printk("EL311003 : d=%d @=%x\n", data[0], + devpriv->iobase + APCI1516_DIGITAL_OP); + + } //if(data[1]==0) + else { + if (data[1] == 1) { + switch (ui_NoOfChannel) { + + case 2: + data[0] = + (data[0] << (2 * + data[2])) | ui_Temp; + break; + + case 4: + data[0] = + (data[0] << (4 * + data[2])) | ui_Temp; + break; + + case 7: + data[0] = data[0] | ui_Temp; + break; + + default: + comedi_error(dev, " chan spec wrong"); + return -EINVAL; // "sorry channel spec wrong " + + } //switch(ui_NoOfChannels) + + outw(data[0], + devpriv->iobase + APCI1516_DIGITAL_OP); + + printk("EL311003 : d=%d @=%x\n", data[0], + devpriv->iobase + APCI1516_DIGITAL_OP); + } // if(data[1]==1) + else { + printk("\nSpecified channel not supported\n"); + } //else if(data[1]==1) + } //elseif(data[1]==0) + } //if(data[3]==0) + else { + if (data[3] == 1) { + if (data[1] == 0) { + data[0] = ~data[0] & 0x1; + ui_Temp1 = 1; + ui_Temp1 = ui_Temp1 << ui_NoOfChannel; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = (data[0] << ui_NoOfChannel) ^ 0xff; + data[0] = data[0] & ui_Temp; + outw(data[0], + devpriv->iobase + APCI1516_DIGITAL_OP); + + printk("EL311003 : d=%d @=%x\n", data[0], + devpriv->iobase + APCI1516_DIGITAL_OP); + + } //if(data[1]==0) + else { + if (data[1] == 1) { + switch (ui_NoOfChannel) { + + case 2: + data[0] = ~data[0] & 0x3; + ui_Temp1 = 3; + ui_Temp1 = + ui_Temp1 << 2 * data[2]; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = + ((data[0] << (2 * + data + [2])) ^ + 0xff) & ui_Temp; + break; + + case 4: + data[0] = ~data[0] & 0xf; + ui_Temp1 = 15; + ui_Temp1 = + ui_Temp1 << 4 * data[2]; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = + ((data[0] << (4 * + data + [2])) ^ + 0xff) & ui_Temp; + break; + + case 7: + break; + + default: + comedi_error(dev, + " chan spec wrong"); + return -EINVAL; // "sorry channel spec wrong " + + } //switch(ui_NoOfChannels) + + outw(data[0], + devpriv->iobase + + APCI1516_DIGITAL_OP); + + printk("EL311003 : d=%d @=%x\n", + data[0], + devpriv->iobase + + APCI1516_DIGITAL_OP); + } // if(data[1]==1) + else { + printk("\nSpecified channel not supported\n"); + } //else if(data[1]==1) + } //elseif(data[1]==0) + } //if(data[3]==1); + else { + printk("\nSpecified functionality does not exist\n"); + return -EINVAL; + } //if else data[3]==1) + } //if else data[3]==0) + return (insn->n);; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1516_ReadDigitalOutput | +| (comedi_device *dev,comedi_subdevice *s,comedi_insn *insn, + lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Read value of the selected channel or port | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| comedi_subdevice *s, :pointer to subdevice structure + comedi_insn *insn :pointer to insn structure | +| lsampl_t *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1516_ReadDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + + UINT ui_Temp; + UINT ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel + ui_Temp = data[0]; + *data = inw(devpriv->iobase + APCI1516_DIGITAL_OP_RW); + if (ui_Temp == 0) { + *data = (*data >> ui_NoOfChannel) & 0x1; + } //if(ui_Temp==0) + else { + if (ui_Temp == 1) { + switch (ui_NoOfChannel) { + + case 2: + *data = (*data >> (2 * data[1])) & 3; + break; + + case 4: + *data = (*data >> (4 * data[1])) & 15; + break; + + case 7: + break; + + default: + comedi_error(dev, " chan spec wrong"); + return -EINVAL; // "sorry channel spec wrong " + + } //switch(ui_NoOfChannels) + } //if(ui_Temp==1) + else { + printk("\nSpecified channel not supported \n"); + } //elseif(ui_Temp==1) + } //elseif(ui_Temp==0) + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1516_ConfigWatchdog(comedi_device *dev, + comedi_subdevice *s,comedi_insn *insn,lsampl_t *data) | +| | ++----------------------------------------------------------------------------+ +| Task : Configures The Watchdog | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| comedi_subdevice *s, :pointer to subdevice structure + comedi_insn *insn :pointer to insn structure | +| lsampl_t *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI1516_ConfigWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + if (data[0] == 0) { + //Disable the watchdog + outw(0x0, + devpriv->i_IobaseAddon + + APCI1516_WATCHDOG_ENABLEDISABLE); + //Loading the Reload value + outw(data[1], + devpriv->i_IobaseAddon + + APCI1516_WATCHDOG_RELOAD_VALUE); + data[1] = data[1] >> 16; + outw(data[1], + devpriv->i_IobaseAddon + + APCI1516_WATCHDOG_RELOAD_VALUE + 2); + } //if(data[0]==0) + else { + printk("\nThe input parameters are wrong\n"); + return -EINVAL; + } //elseif(data[0]==0) + + return insn->n; +} + + /* + +----------------------------------------------------------------------------+ + | Function Name : int i_APCI1516_StartStopWriteWatchdog | + | (comedi_device *dev,comedi_subdevice *s, + comedi_insn *insn,lsampl_t *data); | + +----------------------------------------------------------------------------+ + | Task : Start / Stop The Watchdog | + +----------------------------------------------------------------------------+ + | Input Parameters : comedi_device *dev : Driver handle | + | comedi_subdevice *s, :pointer to subdevice structure + comedi_insn *insn :pointer to insn structure | + | lsampl_t *data : Data Pointer to read status | + +----------------------------------------------------------------------------+ + | Output Parameters : -- | + +----------------------------------------------------------------------------+ + | Return Value : TRUE : No error occur | + | : FALSE : Error occur. Return the error | + | | + +----------------------------------------------------------------------------+ + */ + +int i_APCI1516_StartStopWriteWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + switch (data[0]) { + case 0: //stop the watchdog + outw(0x0, devpriv->i_IobaseAddon + APCI1516_WATCHDOG_ENABLEDISABLE); //disable the watchdog + break; + case 1: //start the watchdog + outw(0x0001, + devpriv->i_IobaseAddon + + APCI1516_WATCHDOG_ENABLEDISABLE); + break; + case 2: //Software trigger + outw(0x0201, + devpriv->i_IobaseAddon + + APCI1516_WATCHDOG_ENABLEDISABLE); + break; + default: + printk("\nSpecified functionality does not exist\n"); + return -EINVAL; + } // switch(data[0]) + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1516_ReadWatchdog | +| (comedi_device *dev,comedi_subdevice *s,comedi_insn *insn, + lsampl_t *data); | ++----------------------------------------------------------------------------+ +| Task : Read The Watchdog | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| comedi_subdevice *s, :pointer to subdevice structure + comedi_insn *insn :pointer to insn structure | +| lsampl_t *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI1516_ReadWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + data[0] = inw(devpriv->i_IobaseAddon + APCI1516_WATCHDOG_STATUS) & 0x1; + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1516_Reset(comedi_device *dev) | | ++----------------------------------------------------------------------------+ +| Task :resets all the registers | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1516_Reset(comedi_device * dev) +{ + outw(0x0, devpriv->iobase + APCI1516_DIGITAL_OP); //RESETS THE DIGITAL OUTPUTS + outw(0x0, devpriv->i_IobaseAddon + APCI1516_WATCHDOG_ENABLEDISABLE); + outw(0x0, devpriv->i_IobaseAddon + APCI1516_WATCHDOG_RELOAD_VALUE); + outw(0x0, devpriv->i_IobaseAddon + APCI1516_WATCHDOG_RELOAD_VALUE + 2); + return 0; +} --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.h @@ -0,0 +1,71 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ + +/********* Definitions for APCI-1516 card *****/ + +// Card Specific information +#define APCI1516_BOARD_VENDOR_ID 0x15B8 +#define APCI1516_ADDRESS_RANGE 8 + +//DIGITAL INPUT-OUTPUT DEFINE + +#define APCI1516_DIGITAL_OP 4 +#define APCI1516_DIGITAL_OP_RW 4 +#define APCI1516_DIGITAL_IP 0 + +// TIMER COUNTER WATCHDOG DEFINES + +#define ADDIDATA_WATCHDOG 2 +#define APCI1516_DIGITAL_OP_WATCHDOG 0 +#define APCI1516_WATCHDOG_ENABLEDISABLE 12 +#define APCI1516_WATCHDOG_RELOAD_VALUE 4 +#define APCI1516_WATCHDOG_STATUS 16 + +// Hardware Layer functions for Apci1516 + +//Digital Input +INT i_APCI1516_ReadMoreDigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +INT i_APCI1516_Read1DigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +//Digital Output +int i_APCI1516_ConfigDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +INT i_APCI1516_WriteDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +INT i_APCI1516_ReadDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +// TIMER +// timer value is passed as u seconds +int i_APCI1516_ConfigWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +int i_APCI1516_StartStopWriteWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +int i_APCI1516_ReadWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +//reset +INT i_APCI1516_Reset(comedi_device * dev); --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c @@ -0,0 +1,1105 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-------------------------------+---------------------------------------+ + | Project : APCI-1564 | Compiler : GCC | + | Module name : hwdrv_apci1564.c| Version : 2.96 | + +-------------------------------+---------------------------------------+ + | Project manager: Eric Stolz | Date : 02/12/2002 | + +-------------------------------+---------------------------------------+ + | Description : Hardware Layer Acces For APCI-1564 | + +-----------------------------------------------------------------------+ + | UPDATES | + +----------+-----------+------------------------------------------------+ + | Date | Author | Description of updates | + +----------+-----------+------------------------------------------------+ + | | | | + | | | | + | | | | + +----------+-----------+------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Included files | ++----------------------------------------------------------------------------+ +*/ + +#include +#include "hwdrv_apci1564.h" + +//Global variables +UINT ui_InterruptStatus_1564 = 0; +UINT ui_InterruptData, ui_Type; + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1564_ConfigDigitalInput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Configures the digital input Subdevice | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| lsampl_t *data : Data Pointer contains | +| configuration parameters as below | +| | +| data[0] : 1 Enable Digital Input Interrupt | +| 0 Disable Digital Input Interrupt | +| data[1] : 0 ADDIDATA Interrupt OR LOGIC | +| : 1 ADDIDATA Interrupt AND LOGIC | +| data[2] : Interrupt mask for the mode 1 | +| data[3] : Interrupt mask for the mode 2 | +| | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI1564_ConfigDigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + devpriv->tsk_Current = current; + /*******************************/ + /* Set the digital input logic */ + /*******************************/ + if (data[0] == ADDIDATA_ENABLE) { + data[2] = data[2] << 4; + data[3] = data[3] << 4; + outl(data[2], + devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP + + APCI1564_DIGITAL_IP_INTERRUPT_MODE1); + outl(data[3], + devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP + + APCI1564_DIGITAL_IP_INTERRUPT_MODE2); + if (data[1] == ADDIDATA_OR) { + outl(0x4, + devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP + + APCI1564_DIGITAL_IP_IRQ); + } // if (data[1] == ADDIDATA_OR) + else { + outl(0x6, + devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP + + APCI1564_DIGITAL_IP_IRQ); + } // else if (data[1] == ADDIDATA_OR) + } // if (data[0] == ADDIDATA_ENABLE) + else { + outl(0x0, + devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP + + APCI1564_DIGITAL_IP_INTERRUPT_MODE1); + outl(0x0, + devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP + + APCI1564_DIGITAL_IP_INTERRUPT_MODE2); + outl(0x0, + devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP + + APCI1564_DIGITAL_IP_IRQ); + } // else if (data[0] == ADDIDATA_ENABLE) + + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1564_Read1DigitalInput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Return the status of the digital input | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT ui_Channel : Channel number to read | +| lsampl_t *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI1564_Read1DigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_TmpValue = 0; + UINT ui_Channel; + + ui_Channel = CR_CHAN(insn->chanspec); + if (ui_Channel >= 0 && ui_Channel <= 31) { + ui_TmpValue = + (UINT) inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP); + // since only 1 channel reqd to bring it to last bit it is rotated + // 8 +(chan - 1) times then ANDed with 1 for last bit. + *data = (ui_TmpValue >> ui_Channel) & 0x1; + } // if (ui_Channel >= 0 && ui_Channel <=31) + else { + comedi_error(dev, "Not a valid channel number !!! \n"); + return -EINVAL; // "sorry channel spec wrong " + } //else if (ui_Channel >= 0 && ui_Channel <=31) + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1564_ReadMoreDigitalInput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Return the status of the Requested digital inputs | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT ui_NoOfChannels : No Of Channels To be Read | +| UINT *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI1564_ReadMoreDigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_PortValue = data[0]; + UINT ui_Mask = 0; + UINT ui_NoOfChannels; + + ui_NoOfChannels = CR_CHAN(insn->chanspec); + if (data[1] == 0) { + *data = (UINT) inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP); + switch (ui_NoOfChannels) { + case 2: + ui_Mask = 3; + *data = (*data >> (2 * ui_PortValue)) & ui_Mask; + break; + case 4: + ui_Mask = 15; + *data = (*data >> (4 * ui_PortValue)) & ui_Mask; + break; + case 8: + ui_Mask = 255; + *data = (*data >> (8 * ui_PortValue)) & ui_Mask; + break; + case 16: + ui_Mask = 65535; + *data = (*data >> (16 * ui_PortValue)) & ui_Mask; + break; + case 31: + break; + default: + comedi_error(dev, "Not a valid Channel number !!!\n"); + return -EINVAL; // "sorry channel spec wrong " + break; + } // switch (ui_NoOfChannels) + } // if (data[1]==0) + else { + if (data[1] == 1) { + *data = ui_InterruptStatus_1564; + } // if (data[1]==1) + } // else if (data[1]==0) + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1564_ConfigDigitalOutput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Configures The Digital Output Subdevice. | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT *data : Data Pointer contains | +| configuration parameters as below | +| | +| data[1] : 1 Enable VCC Interrupt | +| 0 Disable VCC Interrupt | +| data[2] : 1 Enable CC Interrupt | +| 0 Disable CC Interrupt | +| | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI1564_ConfigDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + ULONG ul_Command = 0; + + if ((data[0] != 0) && (data[0] != 1)) { + comedi_error(dev, + "Not a valid Data !!! ,Data should be 1 or 0\n"); + return -EINVAL; + } // if ((data[0]!=0) && (data[0]!=1)) + if (data[0]) { + devpriv->b_OutputMemoryStatus = ADDIDATA_ENABLE; + } // if (data[0]) + else { + devpriv->b_OutputMemoryStatus = ADDIDATA_DISABLE; + } // else if (data[0]) + if (data[1] == ADDIDATA_ENABLE) { + ul_Command = ul_Command | 0x1; + } // if (data[1] == ADDIDATA_ENABLE) + else { + ul_Command = ul_Command & 0xFFFFFFFE; + } // else if (data[1] == ADDIDATA_ENABLE) + if (data[2] == ADDIDATA_ENABLE) { + ul_Command = ul_Command | 0x2; + } // if (data[2] == ADDIDATA_ENABLE) + else { + ul_Command = ul_Command & 0xFFFFFFFD; + } // else if (data[2] == ADDIDATA_ENABLE) + outl(ul_Command, + devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP + + APCI1564_DIGITAL_OP_INTERRUPT); + ui_InterruptData = + inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP + + APCI1564_DIGITAL_OP_INTERRUPT); + devpriv->tsk_Current = current; + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1564_WriteDigitalOutput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Writes port value To the selected port | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT ui_NoOfChannels : No Of Channels To Write | +| UINT *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI1564_WriteDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_Temp, ui_Temp1; + UINT ui_NoOfChannel; + + ui_NoOfChannel = CR_CHAN(insn->chanspec); + if (devpriv->b_OutputMemoryStatus) { + ui_Temp = + inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP + + APCI1564_DIGITAL_OP_RW); + } // if (devpriv->b_OutputMemoryStatus ) + else { + ui_Temp = 0; + } // else if (devpriv->b_OutputMemoryStatus ) + if (data[3] == 0) { + if (data[1] == 0) { + data[0] = (data[0] << ui_NoOfChannel) | ui_Temp; + outl(data[0], + devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP + + APCI1564_DIGITAL_OP_RW); + } // if (data[1]==0) + else { + if (data[1] == 1) { + switch (ui_NoOfChannel) { + case 2: + data[0] = + (data[0] << (2 * + data[2])) | ui_Temp; + break; + case 4: + data[0] = + (data[0] << (4 * + data[2])) | ui_Temp; + break; + case 8: + data[0] = + (data[0] << (8 * + data[2])) | ui_Temp; + break; + case 16: + data[0] = + (data[0] << (16 * + data[2])) | ui_Temp; + break; + case 31: + data[0] = data[0] | ui_Temp; + break; + default: + comedi_error(dev, " chan spec wrong"); + return -EINVAL; // "sorry channel spec wrong " + } // switch (ui_NoOfChannels) + outl(data[0], + devpriv->i_IobaseAmcc + + APCI1564_DIGITAL_OP + + APCI1564_DIGITAL_OP_RW); + } // if (data[1]==1) + else { + printk("\nSpecified channel not supported\n"); + } // else if (data[1]==1) + } // else if (data[1]==0) + } //if(data[3]==0) + else { + if (data[3] == 1) { + if (data[1] == 0) { + data[0] = ~data[0] & 0x1; + ui_Temp1 = 1; + ui_Temp1 = ui_Temp1 << ui_NoOfChannel; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = + (data[0] << ui_NoOfChannel) ^ + 0xffffffff; + data[0] = data[0] & ui_Temp; + outl(data[0], + devpriv->i_IobaseAmcc + + APCI1564_DIGITAL_OP + + APCI1564_DIGITAL_OP_RW); + } // if (data[1]==0) + else { + if (data[1] == 1) { + switch (ui_NoOfChannel) { + case 2: + data[0] = ~data[0] & 0x3; + ui_Temp1 = 3; + ui_Temp1 = + ui_Temp1 << 2 * data[2]; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = + ((data[0] << (2 * + data + [2])) ^ + 0xffffffff) & ui_Temp; + break; + case 4: + data[0] = ~data[0] & 0xf; + ui_Temp1 = 15; + ui_Temp1 = + ui_Temp1 << 4 * data[2]; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = + ((data[0] << (4 * + data + [2])) ^ + 0xffffffff) & ui_Temp; + break; + case 8: + data[0] = ~data[0] & 0xff; + ui_Temp1 = 255; + ui_Temp1 = + ui_Temp1 << 8 * data[2]; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = + ((data[0] << (8 * + data + [2])) ^ + 0xffffffff) & ui_Temp; + break; + case 16: + data[0] = ~data[0] & 0xffff; + ui_Temp1 = 65535; + ui_Temp1 = + ui_Temp1 << 16 * + data[2]; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = + ((data[0] << (16 * + data + [2])) ^ + 0xffffffff) & ui_Temp; + break; + case 31: + break; + default: + comedi_error(dev, + " chan spec wrong"); + return -EINVAL; // "sorry channel spec wrong " + } //switch(ui_NoOfChannels) + outl(data[0], + devpriv->i_IobaseAmcc + + APCI1564_DIGITAL_OP + + APCI1564_DIGITAL_OP_RW); + } // if (data[1]==1) + else { + printk("\nSpecified channel not supported\n"); + } // else if (data[1]==1) + } // else if (data[1]==0) + } // if (data[3]==1); + else { + printk("\nSpecified functionality does not exist\n"); + return -EINVAL; + } // else if (data[3]==1) + } // else if (data[3]==0) + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1564_ReadDigitalOutput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Read value of the selected channel or port | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT ui_NoOfChannels : No Of Channels To read | +| UINT *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI1564_ReadDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_Temp; + UINT ui_NoOfChannel; + + ui_NoOfChannel = CR_CHAN(insn->chanspec); + ui_Temp = data[0]; + *data = inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP + + APCI1564_DIGITAL_OP_RW); + if (ui_Temp == 0) { + *data = (*data >> ui_NoOfChannel) & 0x1; + } // if (ui_Temp==0) + else { + if (ui_Temp == 1) { + switch (ui_NoOfChannel) { + case 2: + *data = (*data >> (2 * data[1])) & 3; + break; + + case 4: + *data = (*data >> (4 * data[1])) & 15; + break; + + case 8: + *data = (*data >> (8 * data[1])) & 255; + break; + + case 16: + *data = (*data >> (16 * data[1])) & 65535; + break; + + case 31: + break; + + default: + comedi_error(dev, " chan spec wrong"); + return -EINVAL; // "sorry channel spec wrong " + break; + } // switch(ui_NoOfChannels) + } // if (ui_Temp==1) + else { + printk("\nSpecified channel not supported \n"); + } // else if (ui_Temp==1) + } // else if (ui_Temp==0) + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1564_ConfigTimerCounterWatchdog | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Configures The Timer , Counter or Watchdog | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT *data : Data Pointer contains | +| configuration parameters as below | +| | +| data[0] : 0 Configure As Timer | +| 1 Configure As Counter | +| 2 Configure As Watchdog | +| data[1] : 1 Enable Interrupt | +| 0 Disable Interrupt | +| data[2] : Time Unit | +| data[3] : Reload Value | +| data[4] : Timer Mode | +| data[5] : Timer Counter Watchdog Number| + data[6] : Counter Direction ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI1564_ConfigTimerCounterWatchdog(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + ULONG ul_Command1 = 0; + devpriv->tsk_Current = current; + if (data[0] == ADDIDATA_WATCHDOG) { + devpriv->b_TimerSelectMode = ADDIDATA_WATCHDOG; + + //Disable the watchdog + outl(0x0, + devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP_WATCHDOG + + APCI1564_TCW_PROG); + //Loading the Reload value + outl(data[3], + devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP_WATCHDOG + + APCI1564_TCW_RELOAD_VALUE); + } // if (data[0]==ADDIDATA_WATCHDOG) + else if (data[0] == ADDIDATA_TIMER) { + //First Stop The Timer + ul_Command1 = + inl(devpriv->i_IobaseAmcc + APCI1564_TIMER + + APCI1564_TCW_PROG); + ul_Command1 = ul_Command1 & 0xFFFFF9FEUL; + outl(ul_Command1, devpriv->i_IobaseAmcc + APCI1564_TIMER + APCI1564_TCW_PROG); //Stop The Timer + + devpriv->b_TimerSelectMode = ADDIDATA_TIMER; + if (data[1] == 1) { + outl(0x02, devpriv->i_IobaseAmcc + APCI1564_TIMER + APCI1564_TCW_PROG); //Enable TIMER int & DISABLE ALL THE OTHER int SOURCES + outl(0x0, + devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP + + APCI1564_DIGITAL_IP_IRQ); + outl(0x0, + devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP + + APCI1564_DIGITAL_OP_IRQ); + outl(0x0, + devpriv->i_IobaseAmcc + + APCI1564_DIGITAL_OP_WATCHDOG + + APCI1564_TCW_IRQ); + outl(0x0, + devpriv->iobase + APCI1564_COUNTER1 + + APCI1564_TCW_IRQ); + outl(0x0, + devpriv->iobase + APCI1564_COUNTER2 + + APCI1564_TCW_IRQ); + outl(0x0, + devpriv->iobase + APCI1564_COUNTER3 + + APCI1564_TCW_IRQ); + outl(0x0, + devpriv->iobase + APCI1564_COUNTER4 + + APCI1564_TCW_IRQ); + } // if (data[1]==1) + else { + outl(0x0, devpriv->i_IobaseAmcc + APCI1564_TIMER + APCI1564_TCW_PROG); //disable Timer interrupt + } // else if (data[1]==1) + + // Loading Timebase + + outl(data[2], + devpriv->i_IobaseAmcc + APCI1564_TIMER + + APCI1564_TCW_TIMEBASE); + + //Loading the Reload value + outl(data[3], + devpriv->i_IobaseAmcc + APCI1564_TIMER + + APCI1564_TCW_RELOAD_VALUE); + + ul_Command1 = + inl(devpriv->i_IobaseAmcc + APCI1564_TIMER + + APCI1564_TCW_PROG); + ul_Command1 = + (ul_Command1 & 0xFFF719E2UL) | 2UL << 13UL | 0x10UL; + outl(ul_Command1, devpriv->i_IobaseAmcc + APCI1564_TIMER + APCI1564_TCW_PROG); //mode 2 + } // else if (data[0]==ADDIDATA_TIMER) + else if (data[0] == ADDIDATA_COUNTER) { + devpriv->b_TimerSelectMode = ADDIDATA_COUNTER; + devpriv->b_ModeSelectRegister = data[5]; + + //First Stop The Counter + ul_Command1 = + inl(devpriv->iobase + ((data[5] - 1) * 0x20) + + APCI1564_TCW_PROG); + ul_Command1 = ul_Command1 & 0xFFFFF9FEUL; + outl(ul_Command1, devpriv->iobase + ((data[5] - 1) * 0x20) + APCI1564_TCW_PROG); //Stop The Timer + + /************************/ + /* Set the reload value */ + /************************/ + outl(data[3], + devpriv->iobase + ((data[5] - 1) * 0x20) + + APCI1564_TCW_RELOAD_VALUE); + + /******************************/ + /* Set the mode : */ + /* - Disable the hardware */ + /* - Disable the counter mode */ + /* - Disable the warning */ + /* - Disable the reset */ + /* - Disable the timer mode */ + /* - Enable the counter mode */ + /******************************/ + ul_Command1 = + (ul_Command1 & 0xFFFC19E2UL) | 0x80000UL | + (ULONG) ((ULONG) data[4] << 16UL); + outl(ul_Command1, + devpriv->iobase + ((data[5] - 1) * 0x20) + + APCI1564_TCW_PROG); + + // Enable or Disable Interrupt + ul_Command1 = (ul_Command1 & 0xFFFFF9FD) | (data[1] << 1); + outl(ul_Command1, + devpriv->iobase + ((data[5] - 1) * 0x20) + + APCI1564_TCW_PROG); + + /*****************************/ + /* Set the Up/Down selection */ + /*****************************/ + ul_Command1 = (ul_Command1 & 0xFFFBF9FFUL) | (data[6] << 18); + outl(ul_Command1, + devpriv->iobase + ((data[5] - 1) * 0x20) + + APCI1564_TCW_PROG); + } // else if (data[0]==ADDIDATA_COUNTER) + else { + printk(" Invalid subdevice."); + } // else if (data[0]==ADDIDATA_WATCHDOG) + + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1564_StartStopWriteTimerCounterWatchdog | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Start / Stop The Selected Timer , Counter or Watchdog | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT *data : Data Pointer contains | +| configuration parameters as below | +| | +| data[0] : 0 Timer | +| 1 Counter | +| 2 Watchdog | | data[1] : 1 Start | +| 0 Stop | +| 2 Trigger | +| Clear (Only Counter) | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI1564_StartStopWriteTimerCounterWatchdog(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + ULONG ul_Command1 = 0; + if (devpriv->b_TimerSelectMode == ADDIDATA_WATCHDOG) { + switch (data[1]) { + case 0: //stop the watchdog + outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP_WATCHDOG + APCI1564_TCW_PROG); //disable the watchdog + break; + case 1: //start the watchdog + outl(0x0001, + devpriv->i_IobaseAmcc + + APCI1564_DIGITAL_OP_WATCHDOG + + APCI1564_TCW_PROG); + break; + case 2: //Software trigger + outl(0x0201, + devpriv->i_IobaseAmcc + + APCI1564_DIGITAL_OP_WATCHDOG + + APCI1564_TCW_PROG); + break; + default: + printk("\nSpecified functionality does not exist\n"); + return -EINVAL; + } // switch (data[1]) + } // if (devpriv->b_TimerSelectMode==ADDIDATA_WATCHDOG) + if (devpriv->b_TimerSelectMode == ADDIDATA_TIMER) { + if (data[1] == 1) { + ul_Command1 = + inl(devpriv->i_IobaseAmcc + APCI1564_TIMER + + APCI1564_TCW_PROG); + ul_Command1 = (ul_Command1 & 0xFFFFF9FFUL) | 0x1UL; + + //Enable the Timer + outl(ul_Command1, + devpriv->i_IobaseAmcc + APCI1564_TIMER + + APCI1564_TCW_PROG); + } // if (data[1]==1) + else if (data[1] == 0) { + //Stop The Timer + + ul_Command1 = + inl(devpriv->i_IobaseAmcc + APCI1564_TIMER + + APCI1564_TCW_PROG); + ul_Command1 = ul_Command1 & 0xFFFFF9FEUL; + outl(ul_Command1, + devpriv->i_IobaseAmcc + APCI1564_TIMER + + APCI1564_TCW_PROG); + } // else if(data[1]==0) + } // if (devpriv->b_TimerSelectMode==ADDIDATA_TIMER) + if (devpriv->b_TimerSelectMode == ADDIDATA_COUNTER) { + ul_Command1 = + inl(devpriv->iobase + ((devpriv->b_ModeSelectRegister - + 1) * 0x20) + APCI1564_TCW_PROG); + if (data[1] == 1) { + //Start the Counter subdevice + ul_Command1 = (ul_Command1 & 0xFFFFF9FFUL) | 0x1UL; + } // if (data[1] == 1) + else if (data[1] == 0) { + // Stops the Counter subdevice + ul_Command1 = 0; + + } // else if (data[1] == 0) + else if (data[1] == 2) { + // Clears the Counter subdevice + ul_Command1 = (ul_Command1 & 0xFFFFF9FFUL) | 0x400; + } // else if (data[1] == 3) + outl(ul_Command1, + devpriv->iobase + ((devpriv->b_ModeSelectRegister - + 1) * 0x20) + APCI1564_TCW_PROG); + } // if (devpriv->b_TimerSelectMode==ADDIDATA_COUNTER) + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1564_ReadTimerCounterWatchdog | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Read The Selected Timer , Counter or Watchdog | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT *data : Data Pointer contains | +| configuration parameters as below | +| | + ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI1564_ReadTimerCounterWatchdog(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + ULONG ul_Command1 = 0; + + if (devpriv->b_TimerSelectMode == ADDIDATA_WATCHDOG) { + // Stores the status of the Watchdog + data[0] = + inl(devpriv->i_IobaseAmcc + + APCI1564_DIGITAL_OP_WATCHDOG + + APCI1564_TCW_TRIG_STATUS) & 0x1; + data[1] = + inl(devpriv->i_IobaseAmcc + + APCI1564_DIGITAL_OP_WATCHDOG); + } // if (devpriv->b_TimerSelectMode==ADDIDATA_WATCHDOG) + else if (devpriv->b_TimerSelectMode == ADDIDATA_TIMER) { + // Stores the status of the Timer + data[0] = + inl(devpriv->i_IobaseAmcc + APCI1564_TIMER + + APCI1564_TCW_TRIG_STATUS) & 0x1; + + // Stores the Actual value of the Timer + data[1] = inl(devpriv->i_IobaseAmcc + APCI1564_TIMER); + } // else if (devpriv->b_TimerSelectMode==ADDIDATA_TIMER) + else if (devpriv->b_TimerSelectMode == ADDIDATA_COUNTER) { + // Read the Counter Actual Value. + data[0] = + inl(devpriv->iobase + ((devpriv->b_ModeSelectRegister - + 1) * 0x20) + + APCI1564_TCW_SYNC_ENABLEDISABLE); + ul_Command1 = + inl(devpriv->iobase + ((devpriv->b_ModeSelectRegister - + 1) * 0x20) + APCI1564_TCW_TRIG_STATUS); + + /***********************************/ + /* Get the software trigger status */ + /***********************************/ + data[1] = (BYTE) ((ul_Command1 >> 1) & 1); + + /***********************************/ + /* Get the hardware trigger status */ + /***********************************/ + data[2] = (BYTE) ((ul_Command1 >> 2) & 1); + + /*********************************/ + /* Get the software clear status */ + /*********************************/ + data[3] = (BYTE) ((ul_Command1 >> 3) & 1); + + /***************************/ + /* Get the overflow status */ + /***************************/ + data[4] = (BYTE) ((ul_Command1 >> 0) & 1); + } // else if (devpriv->b_TimerSelectMode==ADDIDATA_COUNTER) + else if ((devpriv->b_TimerSelectMode != ADDIDATA_TIMER) + && (devpriv->b_TimerSelectMode != ADDIDATA_WATCHDOG) + && (devpriv->b_TimerSelectMode != ADDIDATA_COUNTER)) { + printk("\n Invalid Subdevice !!!\n"); + } // else if ((devpriv->b_TimerSelectMode!=ADDIDATA_TIMER) && (devpriv->b_TimerSelectMode!=ADDIDATA_WATCHDOG)&& (devpriv->b_TimerSelectMode!=ADDIDATA_COUNTER)) + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1564_ReadInterruptStatus | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task :Reads the interrupt status register | ++----------------------------------------------------------------------------+ +| Input Parameters : | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI1564_ReadInterruptStatus(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + *data = ui_Type; + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : static void v_APCI1564_Interrupt | +| (int irq , void *d) | ++----------------------------------------------------------------------------+ +| Task : Interrupt handler for the interruptible digital inputs | ++----------------------------------------------------------------------------+ +| Input Parameters : int irq : irq number | +| void *d : void pointer | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +static VOID v_APCI1564_Interrupt(int irq, void *d) +{ + comedi_device *dev = d; + UINT ui_DO, ui_DI; + UINT ui_Timer; + UINT ui_C1, ui_C2, ui_C3, ui_C4; + ULONG ul_Command2 = 0; + ui_DI = inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP + + APCI1564_DIGITAL_IP_IRQ) & 0x01; + ui_DO = inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP + + APCI1564_DIGITAL_OP_IRQ) & 0x01; + ui_Timer = + inl(devpriv->i_IobaseAmcc + APCI1564_TIMER + + APCI1564_TCW_IRQ) & 0x01; + ui_C1 = inl(devpriv->iobase + APCI1564_COUNTER1 + + APCI1564_TCW_IRQ) & 0x1; + ui_C2 = inl(devpriv->iobase + APCI1564_COUNTER2 + + APCI1564_TCW_IRQ) & 0x1; + ui_C3 = inl(devpriv->iobase + APCI1564_COUNTER3 + + APCI1564_TCW_IRQ) & 0x1; + ui_C4 = inl(devpriv->iobase + APCI1564_COUNTER4 + + APCI1564_TCW_IRQ) & 0x1; + if (ui_DI == 0 && ui_DO == 0 && ui_Timer == 0 && ui_C1 == 0 + && ui_C2 == 0 && ui_C3 == 0 && ui_C4 == 0) { + printk("\nInterrupt from unknown source\n"); + } // if(ui_DI==0 && ui_DO==0 && ui_Timer==0 && ui_C1==0 && ui_C2==0 && ui_C3==0 && ui_C4==0) + + if (ui_DI == 1) { + ui_DI = inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP + + APCI1564_DIGITAL_IP_IRQ); + outl(0x0, + devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP + + APCI1564_DIGITAL_IP_IRQ); + ui_InterruptStatus_1564 = + inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP + + APCI1564_DIGITAL_IP_INTERRUPT_STATUS); + ui_InterruptStatus_1564 = ui_InterruptStatus_1564 & 0X000FFFF0; + send_sig(SIGIO, devpriv->tsk_Current, 0); // send signal to the sample + outl(ui_DI, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP + APCI1564_DIGITAL_IP_IRQ); //enable the interrupt + return; + } + + if (ui_DO == 1) { + // Check for Digital Output interrupt Type - 1: Vcc interrupt 2: CC interrupt. + ui_Type = + inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP + + APCI1564_DIGITAL_OP_INTERRUPT_STATUS) & 0x3; + //Disable the Interrupt + outl(0x0, + devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP + + APCI1564_DIGITAL_OP_INTERRUPT); + + //Sends signal to user space + send_sig(SIGIO, devpriv->tsk_Current, 0); + + } // if (ui_DO) + + if ((ui_Timer == 1) && (devpriv->b_TimerSelectMode = ADDIDATA_TIMER)) { + // Disable Timer Interrupt + ul_Command2 = + inl(devpriv->i_IobaseAmcc + APCI1564_TIMER + + APCI1564_TCW_PROG); + outl(0x0, + devpriv->i_IobaseAmcc + APCI1564_TIMER + + APCI1564_TCW_PROG); + + //Send a signal to from kernel to user space + send_sig(SIGIO, devpriv->tsk_Current, 0); + + // Enable Timer Interrupt + + outl(ul_Command2, + devpriv->i_IobaseAmcc + APCI1564_TIMER + + APCI1564_TCW_PROG); + } // if ((ui_Timer == 1) && (devpriv->b_TimerSelectMode =ADDIDATA_TIMER)) + + if ((ui_C1 == 1) && (devpriv->b_TimerSelectMode = ADDIDATA_COUNTER)) { + // Disable Counter Interrupt + ul_Command2 = + inl(devpriv->iobase + APCI1564_COUNTER1 + + APCI1564_TCW_PROG); + outl(0x0, + devpriv->iobase + APCI1564_COUNTER1 + + APCI1564_TCW_PROG); + + //Send a signal to from kernel to user space + send_sig(SIGIO, devpriv->tsk_Current, 0); + + // Enable Counter Interrupt + outl(ul_Command2, + devpriv->iobase + APCI1564_COUNTER1 + + APCI1564_TCW_PROG); + } // if ((ui_C1 == 1) && (devpriv->b_TimerSelectMode = ADDIDATA_COUNTER)) + + if ((ui_C2 == 1) && (devpriv->b_TimerSelectMode = ADDIDATA_COUNTER)) { + // Disable Counter Interrupt + ul_Command2 = + inl(devpriv->iobase + APCI1564_COUNTER2 + + APCI1564_TCW_PROG); + outl(0x0, + devpriv->iobase + APCI1564_COUNTER2 + + APCI1564_TCW_PROG); + + //Send a signal to from kernel to user space + send_sig(SIGIO, devpriv->tsk_Current, 0); + + // Enable Counter Interrupt + outl(ul_Command2, + devpriv->iobase + APCI1564_COUNTER2 + + APCI1564_TCW_PROG); + } // if ((ui_C2 == 1) && (devpriv->b_TimerSelectMode =ADDIDATA_COUNTER)) + + if ((ui_C3 == 1) && (devpriv->b_TimerSelectMode = ADDIDATA_COUNTER)) { + // Disable Counter Interrupt + ul_Command2 = + inl(devpriv->iobase + APCI1564_COUNTER3 + + APCI1564_TCW_PROG); + outl(0x0, + devpriv->iobase + APCI1564_COUNTER3 + + APCI1564_TCW_PROG); + + //Send a signal to from kernel to user space + send_sig(SIGIO, devpriv->tsk_Current, 0); + + // Enable Counter Interrupt + outl(ul_Command2, + devpriv->iobase + APCI1564_COUNTER3 + + APCI1564_TCW_PROG); + } // if ((ui_C3 == 1) && (devpriv->b_TimerSelectMode =ADDIDATA_COUNTER)) + + if ((ui_C4 == 1) && (devpriv->b_TimerSelectMode = ADDIDATA_COUNTER)) { + // Disable Counter Interrupt + ul_Command2 = + inl(devpriv->iobase + APCI1564_COUNTER4 + + APCI1564_TCW_PROG); + outl(0x0, + devpriv->iobase + APCI1564_COUNTER4 + + APCI1564_TCW_PROG); + + //Send a signal to from kernel to user space + send_sig(SIGIO, devpriv->tsk_Current, 0); + + // Enable Counter Interrupt + outl(ul_Command2, + devpriv->iobase + APCI1564_COUNTER4 + + APCI1564_TCW_PROG); + } // if ((ui_C4 == 1) && (devpriv->b_TimerSelectMode =ADDIDATA_COUNTER)) + return; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI1564_Reset(comedi_device *dev) | | ++----------------------------------------------------------------------------+ +| Task :resets all the registers | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI1564_Reset(comedi_device * dev) +{ + outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP_IRQ); //disable the interrupts + inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP_INTERRUPT_STATUS); //Reset the interrupt status register + outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP_INTERRUPT_MODE1); //Disable the and/or interrupt + outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP_INTERRUPT_MODE2); + devpriv->b_DigitalOutputRegister = 0; + ui_Type = 0; + outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP); //Resets the output channels + outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP_INTERRUPT); //Disables the interrupt. + outl(0x0, + devpriv->i_IobaseAmcc + APCI1564_DIGITAL_OP_WATCHDOG + + APCI1564_TCW_RELOAD_VALUE); + outl(0x0, devpriv->i_IobaseAmcc + APCI1564_TIMER); + outl(0x0, devpriv->i_IobaseAmcc + APCI1564_TIMER + APCI1564_TCW_PROG); + + outl(0x0, devpriv->iobase + APCI1564_COUNTER1 + APCI1564_TCW_PROG); + outl(0x0, devpriv->iobase + APCI1564_COUNTER2 + APCI1564_TCW_PROG); + outl(0x0, devpriv->iobase + APCI1564_COUNTER3 + APCI1564_TCW_PROG); + outl(0x0, devpriv->iobase + APCI1564_COUNTER4 + APCI1564_TCW_PROG); + return 0; +} --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.h @@ -0,0 +1,122 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ + +/********* Definitions for APCI-1564 card *****/ + +#define APCI1564_BOARD_VENDOR_ID 0x15B8 +#define APCI1564_ADDRESS_RANGE 128 + +//DIGITAL INPUT-OUTPUT DEFINE +// Input defines +#define APCI1564_DIGITAL_IP 0x04 +#define APCI1564_DIGITAL_IP_INTERRUPT_MODE1 4 +#define APCI1564_DIGITAL_IP_INTERRUPT_MODE2 8 +#define APCI1564_DIGITAL_IP_IRQ 16 + +// Output defines +#define APCI1564_DIGITAL_OP 0x18 +#define APCI1564_DIGITAL_OP_RW 0 +#define APCI1564_DIGITAL_OP_INTERRUPT 4 +#define APCI1564_DIGITAL_OP_IRQ 12 + +//Digital Input IRQ Function Selection +#define ADDIDATA_OR 0 +#define ADDIDATA_AND 1 + +//Digital Input Interrupt Status +#define APCI1564_DIGITAL_IP_INTERRUPT_STATUS 12 + +//Digital Output Interrupt Status +#define APCI1564_DIGITAL_OP_INTERRUPT_STATUS 8 + +//Digital Input Interrupt Enable Disable. +#define APCI1564_DIGITAL_IP_INTERRUPT_ENABLE 0x4 +#define APCI1564_DIGITAL_IP_INTERRUPT_DISABLE 0xFFFFFFFB + +//Digital Output Interrupt Enable Disable. +#define APCI1564_DIGITAL_OP_VCC_INTERRUPT_ENABLE 0x1 +#define APCI1564_DIGITAL_OP_VCC_INTERRUPT_DISABLE 0xFFFFFFFE +#define APCI1564_DIGITAL_OP_CC_INTERRUPT_ENABLE 0x2 +#define APCI1564_DIGITAL_OP_CC_INTERRUPT_DISABLE 0xFFFFFFFD + +//ADDIDATA Enable Disable + +#define ADDIDATA_ENABLE 1 +#define ADDIDATA_DISABLE 0 + +// TIMER COUNTER WATCHDOG DEFINES + +#define ADDIDATA_TIMER 0 +#define ADDIDATA_COUNTER 1 +#define ADDIDATA_WATCHDOG 2 +#define APCI1564_DIGITAL_OP_WATCHDOG 0x28 +#define APCI1564_TIMER 0x48 +#define APCI1564_COUNTER1 0x0 +#define APCI1564_COUNTER2 0x20 +#define APCI1564_COUNTER3 0x40 +#define APCI1564_COUNTER4 0x60 +#define APCI1564_TCW_SYNC_ENABLEDISABLE 0 +#define APCI1564_TCW_RELOAD_VALUE 4 +#define APCI1564_TCW_TIMEBASE 8 +#define APCI1564_TCW_PROG 12 +#define APCI1564_TCW_TRIG_STATUS 16 +#define APCI1564_TCW_IRQ 20 +#define APCI1564_TCW_WARN_TIMEVAL 24 +#define APCI1564_TCW_WARN_TIMEBASE 28 + +// Hardware Layer functions for Apci1564 + +//DI +// for di read +INT i_APCI1564_ConfigDigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +INT i_APCI1564_Read1DigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +INT i_APCI1564_ReadMoreDigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +//DO +int i_APCI1564_ConfigDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +INT i_APCI1564_WriteDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +INT i_APCI1564_ReadDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +int i_APCI1564_ReadInterruptStatus(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +// TIMER +// timer value is passed as u seconds +INT i_APCI1564_ConfigTimerCounterWatchdog(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); +int i_APCI1564_StartStopWriteTimerCounterWatchdog(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); +int i_APCI1564_ReadTimerCounterWatchdog(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + +// INTERRUPT +static VOID v_APCI1564_Interrupt(int irq, void *d); + +// RESET +INT i_APCI1564_Reset(comedi_device * dev); --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci16xx.c @@ -0,0 +1,780 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-----------------------------------------------------------------------+ + | Project : API APCI1648 | Compiler : gcc | + | Module name : TTL.C | Version : 2.96 | + +-------------------------------+---------------------------------------+ + | Project manager: S. Weber | Date : 25/05/2005 | + +-----------------------------------------------------------------------+ + | Description : APCI-16XX TTL I/O module | + | | + | | + +-----------------------------------------------------------------------+ + | UPDATES | + +-----------------------------------------------------------------------+ + | Date | Author | Description of updates | + +----------+-----------+------------------------------------------------+ + |25.05.2005| S.Weber | Creation | + | | | | + +-----------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Included files | ++----------------------------------------------------------------------------+ +*/ + +#include "hwdrv_apci16xx.h" + +/* ++----------------------------------------------------------------------------+ +| Function Name : INT i_APCI16XX_InsnConfigInitTTLIO | +| (comedi_device *dev, | +| comedi_subdevice *s, | +| comedi_insn *insn, | +| lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task APCI16XX_TTL_INIT (using defaults) : | +| Configure the TTL I/O operating mode from all ports | +| You must calling this function be | +| for you call any other function witch access of TTL. | +| APCI16XX_TTL_INITDIRECTION(user inputs for direction) | ++----------------------------------------------------------------------------+ +| Input Parameters : b_InitType = (BYTE) data[0]; | +| b_Port0Mode = (BYTE) data[1]; | +| b_Port1Mode = (BYTE) data[2]; | +| b_Port2Mode = (BYTE) data[3]; | +| b_Port3Mode = (BYTE) data[4]; | +| ........ | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value :>0: No error | +| -1: Port 0 mode selection is wrong | +| -2: Port 1 mode selection is wrong | +| -3: Port 2 mode selection is wrong | +| -4: Port 3 mode selection is wrong | +| -X: Port X-1 mode selection is wrong | +| .... | +| -100 : Config command error | +| -101 : Data size error | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI16XX_InsnConfigInitTTLIO(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = insn->n; + BYTE b_Command = 0; + BYTE b_Cpt = 0; + BYTE b_NumberOfPort = + (BYTE) (devpriv->ps_BoardInfo->i_NbrTTLChannel / 8); + + /************************/ + /* Test the buffer size */ + /************************/ + + if (insn->n >= 1) { + /*******************/ + /* Get the command */ + /* **************** */ + + b_Command = (BYTE) data[0]; + + /********************/ + /* Test the command */ + /********************/ + + if ((b_Command == APCI16XX_TTL_INIT) || + (b_Command == APCI16XX_TTL_INITDIRECTION) || + (b_Command == APCI16XX_TTL_OUTPUTMEMORY)) { + /***************************************/ + /* Test the initialisation buffer size */ + /***************************************/ + + if ((b_Command == APCI16XX_TTL_INITDIRECTION) + && ((BYTE) (insn->n - 1) != b_NumberOfPort)) { + /*******************/ + /* Data size error */ + /*******************/ + + printk("\nBuffer size error"); + i_ReturnValue = -101; + } + + if ((b_Command == APCI16XX_TTL_OUTPUTMEMORY) + && ((BYTE) (insn->n) != 2)) { + /*******************/ + /* Data size error */ + /*******************/ + + printk("\nBuffer size error"); + i_ReturnValue = -101; + } + } else { + /************************/ + /* Config command error */ + /************************/ + + printk("\nCommand selection error"); + i_ReturnValue = -100; + } + } else { + /*******************/ + /* Data size error */ + /*******************/ + + printk("\nBuffer size error"); + i_ReturnValue = -101; + } + + /**************************************************************************/ + /* Test if no error occur and APCI16XX_TTL_INITDIRECTION command selected */ + /**************************************************************************/ + + if ((i_ReturnValue >= 0) && (b_Command == APCI16XX_TTL_INITDIRECTION)) { + memset(devpriv->ul_TTLPortConfiguration, 0, + sizeof(devpriv->ul_TTLPortConfiguration)); + + /*************************************/ + /* Test the port direction selection */ + /*************************************/ + + for (b_Cpt = 1; + (b_Cpt <= b_NumberOfPort) && (i_ReturnValue >= 0); + b_Cpt++) { + /**********************/ + /* Test the direction */ + /**********************/ + + if ((data[b_Cpt] != 0) && (data[b_Cpt] != 0xFF)) { + /************************/ + /* Port direction error */ + /************************/ + + printk("\nPort %d direction selection error", + (INT) b_Cpt); + i_ReturnValue = -(INT) b_Cpt; + } + + /**************************/ + /* Save the configuration */ + /**************************/ + + devpriv->ul_TTLPortConfiguration[(b_Cpt - 1) / 4] = + devpriv->ul_TTLPortConfiguration[(b_Cpt - + 1) / 4] | (data[b_Cpt] << (8 * ((b_Cpt - + 1) % 4))); + } + } + + /**************************/ + /* Test if no error occur */ + /**************************/ + + if (i_ReturnValue >= 0) { + /***********************************/ + /* Test if TTL port initilaisation */ + /***********************************/ + + if ((b_Command == APCI16XX_TTL_INIT) + || (b_Command == APCI16XX_TTL_INITDIRECTION)) { + /******************************/ + /* Set all port configuration */ + /******************************/ + + for (b_Cpt = 0; b_Cpt <= b_NumberOfPort; b_Cpt++) { + if ((b_Cpt % 4) == 0) { + /*************************/ + /* Set the configuration */ + /*************************/ + + outl(devpriv-> + ul_TTLPortConfiguration[b_Cpt / + 4], + devpriv->iobase + 32 + b_Cpt); + } + } + } + } + + /************************************************/ + /* Test if output memory initialisation command */ + /************************************************/ + + if (b_Command == APCI16XX_TTL_OUTPUTMEMORY) { + if (data[1]) { + devpriv->b_OutputMemoryStatus = ADDIDATA_ENABLE; + } else { + devpriv->b_OutputMemoryStatus = ADDIDATA_DISABLE; + } + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| INPUT FUNCTIONS | ++----------------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Function Name : INT i_APCI16XX_InsnBitsReadTTLIO | +| (comedi_device *dev, | +| comedi_subdevice *s, | +| comedi_insn *insn, | +| lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Read the status from selected TTL digital input | +| (b_InputChannel) | ++----------------------------------------------------------------------------+ +| Task : Read the status from digital input port | +| (b_SelectedPort) | ++----------------------------------------------------------------------------+ +| Input Parameters : | +| APCI16XX_TTL_READCHANNEL | +| b_SelectedPort= CR_RANGE(insn->chanspec); | +| b_InputChannel= CR_CHAN(insn->chanspec); | +| b_ReadType = (BYTE) data[0]; | +| | +| APCI16XX_TTL_READPORT | +| b_SelectedPort= CR_RANGE(insn->chanspec); | +| b_ReadType = (BYTE) data[0]; | ++----------------------------------------------------------------------------+ +| Output Parameters : data[0] 0 : Channle is not active | +| 1 : Channle is active | ++----------------------------------------------------------------------------+ +| Return Value : >0 : No error | +| -100 : Config command error | +| -101 : Data size error | +| -102 : The selected TTL input port is wrong | +| -103 : The selected TTL digital input is wrong | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI16XX_InsnBitsReadTTLIO(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = insn->n; + BYTE b_Command = 0; + BYTE b_NumberOfPort = + (BYTE) (devpriv->ps_BoardInfo->i_NbrTTLChannel / 8); + BYTE b_SelectedPort = CR_RANGE(insn->chanspec); + BYTE b_InputChannel = CR_CHAN(insn->chanspec); + BYTE *pb_Status; + DWORD dw_Status; + + /************************/ + /* Test the buffer size */ + /************************/ + + if (insn->n >= 1) { + /*******************/ + /* Get the command */ + /* **************** */ + + b_Command = (BYTE) data[0]; + + /********************/ + /* Test the command */ + /********************/ + + if ((b_Command == APCI16XX_TTL_READCHANNEL) + || (b_Command == APCI16XX_TTL_READPORT)) { + /**************************/ + /* Test the selected port */ + /**************************/ + + if (b_SelectedPort < b_NumberOfPort) { + /**********************/ + /* Test if input port */ + /**********************/ + + if (((devpriv->ul_TTLPortConfiguration + [b_SelectedPort / + 4] >> (8 * + (b_SelectedPort + % + 4))) & + 0xFF) == 0) { + /***************************/ + /* Test the channel number */ + /***************************/ + + if ((b_Command == + APCI16XX_TTL_READCHANNEL) + && (b_InputChannel > 7)) { + /*******************************************/ + /* The selected TTL digital input is wrong */ + /*******************************************/ + + printk("\nChannel selection error"); + i_ReturnValue = -103; + } + } else { + /****************************************/ + /* The selected TTL input port is wrong */ + /****************************************/ + + printk("\nPort selection error"); + i_ReturnValue = -102; + } + } else { + /****************************************/ + /* The selected TTL input port is wrong */ + /****************************************/ + + printk("\nPort selection error"); + i_ReturnValue = -102; + } + } else { + /************************/ + /* Config command error */ + /************************/ + + printk("\nCommand selection error"); + i_ReturnValue = -100; + } + } else { + /*******************/ + /* Data size error */ + /*******************/ + + printk("\nBuffer size error"); + i_ReturnValue = -101; + } + + /**************************/ + /* Test if no error occur */ + /**************************/ + + if (i_ReturnValue >= 0) { + pb_Status = (PBYTE) & data[0]; + + /*******************************/ + /* Get the digital inpu status */ + /*******************************/ + + dw_Status = + inl(devpriv->iobase + 8 + ((b_SelectedPort / 4) * 4)); + dw_Status = (dw_Status >> (8 * (b_SelectedPort % 4))) & 0xFF; + + /***********************/ + /* Save the port value */ + /***********************/ + + *pb_Status = (BYTE) dw_Status; + + /***************************************/ + /* Test if read channel status command */ + /***************************************/ + + if (b_Command == APCI16XX_TTL_READCHANNEL) { + *pb_Status = (*pb_Status >> b_InputChannel) & 1; + } + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : INT i_APCI16XX_InsnReadTTLIOAllPortValue | +| (comedi_device *dev, | +| comedi_subdevice *s, | +| comedi_insn *insn, | +| lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Read the status from all digital input ports | ++----------------------------------------------------------------------------+ +| Input Parameters : - | ++----------------------------------------------------------------------------+ +| Output Parameters : data[0] : Port 0 to 3 data | +| data[1] : Port 4 to 7 data | +| .... | ++----------------------------------------------------------------------------+ +| Return Value : 0: No error | +| -100 : Read command error | +| -101 : Data size error | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI16XX_InsnReadTTLIOAllPortValue(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + BYTE b_Command = (BYTE) CR_AREF(insn->chanspec); + INT i_ReturnValue = insn->n; + BYTE b_Cpt = 0; + BYTE b_NumberOfPort = 0; + lsampl_t *pls_ReadData = data; + + /********************/ + /* Test the command */ + /********************/ + + if ((b_Command == APCI16XX_TTL_READ_ALL_INPUTS) + || (b_Command == APCI16XX_TTL_READ_ALL_OUTPUTS)) { + /**********************************/ + /* Get the number of 32-Bit ports */ + /**********************************/ + + b_NumberOfPort = + (BYTE) (devpriv->ps_BoardInfo->i_NbrTTLChannel / 32); + if ((b_NumberOfPort * 32) < + devpriv->ps_BoardInfo->i_NbrTTLChannel) { + b_NumberOfPort = b_NumberOfPort + 1; + } + + /************************/ + /* Test the buffer size */ + /************************/ + + if (insn->n >= b_NumberOfPort) { + if (b_Command == APCI16XX_TTL_READ_ALL_INPUTS) { + /**************************/ + /* Read all digital input */ + /**************************/ + + for (b_Cpt = 0; b_Cpt < b_NumberOfPort; b_Cpt++) { + /************************/ + /* Read the 32-Bit port */ + /************************/ + + pls_ReadData[b_Cpt] = + inl(devpriv->iobase + 8 + + (b_Cpt * 4)); + + /**************************************/ + /* Mask all channels used als outputs */ + /**************************************/ + + pls_ReadData[b_Cpt] = + pls_ReadData[b_Cpt] & + (~devpriv-> + ul_TTLPortConfiguration[b_Cpt]); + } + } else { + /****************************/ + /* Read all digital outputs */ + /****************************/ + + for (b_Cpt = 0; b_Cpt < b_NumberOfPort; b_Cpt++) { + /************************/ + /* Read the 32-Bit port */ + /************************/ + + pls_ReadData[b_Cpt] = + inl(devpriv->iobase + 20 + + (b_Cpt * 4)); + + /**************************************/ + /* Mask all channels used als outputs */ + /**************************************/ + + pls_ReadData[b_Cpt] = + pls_ReadData[b_Cpt] & devpriv-> + ul_TTLPortConfiguration[b_Cpt]; + } + } + } else { + /*******************/ + /* Data size error */ + /*******************/ + + printk("\nBuffer size error"); + i_ReturnValue = -101; + } + } else { + /*****************/ + /* Command error */ + /*****************/ + + printk("\nCommand selection error"); + i_ReturnValue = -100; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| OUTPUT FUNCTIONS | ++----------------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Function Name : INT i_APCI16XX_InsnBitsWriteTTLIO | +| (comedi_device *dev, | +| comedi_subdevice *s, | +| comedi_insn *insn, | +| lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Set the state from selected TTL digital output | +| (b_OutputChannel) | ++----------------------------------------------------------------------------+ +| Task : Set the state from digital output port | +| (b_SelectedPort) | ++----------------------------------------------------------------------------+ +| Input Parameters : | +| APCI16XX_TTL_WRITECHANNEL_ON | APCI16XX_TTL_WRITECHANNEL_OFF | +| b_SelectedPort = CR_RANGE(insn->chanspec); | +| b_OutputChannel= CR_CHAN(insn->chanspec); | +| b_Command = (BYTE) data[0]; | +| | +| APCI16XX_TTL_WRITEPORT_ON | APCI16XX_TTL_WRITEPORT_OFF | +| b_SelectedPort = CR_RANGE(insn->chanspec); | +| b_Command = (BYTE) data[0]; | ++----------------------------------------------------------------------------+ +| Output Parameters : data[0] : TTL output port 0 to 3 data | +| data[1] : TTL output port 4 to 7 data | +| .... | ++----------------------------------------------------------------------------+ +| Return Value : >0 : No error | +| -100 : Command error | +| -101 : Data size error | +| -102 : The selected TTL output port is wrong | +| -103 : The selected TTL digital output is wrong | +| -104 : Output memory disabled | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI16XX_InsnBitsWriteTTLIO(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = insn->n; + BYTE b_Command = 0; + BYTE b_NumberOfPort = + (BYTE) (devpriv->ps_BoardInfo->i_NbrTTLChannel / 8); + BYTE b_SelectedPort = CR_RANGE(insn->chanspec); + BYTE b_OutputChannel = CR_CHAN(insn->chanspec); + DWORD dw_Status = 0; + + /************************/ + /* Test the buffer size */ + /************************/ + + if (insn->n >= 1) { + /*******************/ + /* Get the command */ + /* **************** */ + + b_Command = (BYTE) data[0]; + + /********************/ + /* Test the command */ + /********************/ + + if ((b_Command == APCI16XX_TTL_WRITECHANNEL_ON) || + (b_Command == APCI16XX_TTL_WRITEPORT_ON) || + (b_Command == APCI16XX_TTL_WRITECHANNEL_OFF) || + (b_Command == APCI16XX_TTL_WRITEPORT_OFF)) { + /**************************/ + /* Test the selected port */ + /**************************/ + + if (b_SelectedPort < b_NumberOfPort) { + /***********************/ + /* Test if output port */ + /***********************/ + + if (((devpriv->ul_TTLPortConfiguration + [b_SelectedPort / + 4] >> (8 * + (b_SelectedPort + % + 4))) & + 0xFF) == 0xFF) { + /***************************/ + /* Test the channel number */ + /***************************/ + + if (((b_Command == APCI16XX_TTL_WRITECHANNEL_ON) || (b_Command == APCI16XX_TTL_WRITECHANNEL_OFF)) && (b_OutputChannel > 7)) { + /********************************************/ + /* The selected TTL digital output is wrong */ + /********************************************/ + + printk("\nChannel selection error"); + i_ReturnValue = -103; + } + + if (((b_Command == APCI16XX_TTL_WRITECHANNEL_OFF) || (b_Command == APCI16XX_TTL_WRITEPORT_OFF)) && (devpriv->b_OutputMemoryStatus == ADDIDATA_DISABLE)) { + /********************************************/ + /* The selected TTL digital output is wrong */ + /********************************************/ + + printk("\nOutput memory disabled"); + i_ReturnValue = -104; + } + + /************************/ + /* Test the buffer size */ + /************************/ + + if (((b_Command == APCI16XX_TTL_WRITEPORT_ON) || (b_Command == APCI16XX_TTL_WRITEPORT_OFF)) && (insn->n < 2)) { + /*******************/ + /* Data size error */ + /*******************/ + + printk("\nBuffer size error"); + i_ReturnValue = -101; + } + } else { + /*****************************************/ + /* The selected TTL output port is wrong */ + /*****************************************/ + + printk("\nPort selection error %lX", + (unsigned long)devpriv-> + ul_TTLPortConfiguration[0]); + i_ReturnValue = -102; + } + } else { + /****************************************/ + /* The selected TTL output port is wrong */ + /****************************************/ + + printk("\nPort selection error %d %d", + b_SelectedPort, b_NumberOfPort); + i_ReturnValue = -102; + } + } else { + /************************/ + /* Config command error */ + /************************/ + + printk("\nCommand selection error"); + i_ReturnValue = -100; + } + } else { + /*******************/ + /* Data size error */ + /*******************/ + + printk("\nBuffer size error"); + i_ReturnValue = -101; + } + + /**************************/ + /* Test if no error occur */ + /**************************/ + + if (i_ReturnValue >= 0) { + /********************************/ + /* Get the digital output state */ + /********************************/ + + dw_Status = + inl(devpriv->iobase + 20 + ((b_SelectedPort / 4) * 4)); + + /**********************************/ + /* Test if output memory not used */ + /**********************************/ + + if (devpriv->b_OutputMemoryStatus == ADDIDATA_DISABLE) { + /*********************************/ + /* Clear the selected port value */ + /*********************************/ + + dw_Status = + dw_Status & (0xFFFFFFFFUL - + (0xFFUL << (8 * (b_SelectedPort % 4)))); + } + + /******************************/ + /* Test if setting channel ON */ + /******************************/ + + if (b_Command == APCI16XX_TTL_WRITECHANNEL_ON) { + dw_Status = + dw_Status | (1UL << ((8 * (b_SelectedPort % + 4)) + b_OutputChannel)); + } + + /***************************/ + /* Test if setting port ON */ + /***************************/ + + if (b_Command == APCI16XX_TTL_WRITEPORT_ON) { + dw_Status = + dw_Status | ((data[1] & 0xFF) << (8 * + (b_SelectedPort % 4))); + } + + /*******************************/ + /* Test if setting channel OFF */ + /*******************************/ + + if (b_Command == APCI16XX_TTL_WRITECHANNEL_OFF) { + dw_Status = + dw_Status & (0xFFFFFFFFUL - + (1UL << ((8 * (b_SelectedPort % 4)) + + b_OutputChannel))); + } + + /****************************/ + /* Test if setting port OFF */ + /****************************/ + + if (b_Command == APCI16XX_TTL_WRITEPORT_OFF) { + dw_Status = + dw_Status & (0xFFFFFFFFUL - + ((data[1] & 0xFF) << (8 * (b_SelectedPort % + 4)))); + } + + outl(dw_Status, + devpriv->iobase + 20 + ((b_SelectedPort / 4) * 4)); + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI2200_Reset(comedi_device *dev) | +----------------------------------------------------------------------------+ +| Task :resets all the registers | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : - | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI16XX_Reset(comedi_device * dev) +{ + return 0; +} --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci16xx.h @@ -0,0 +1,97 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ + +#ifndef COMEDI_SUBD_TTLIO +#define COMEDI_SUBD_TTLIO 11 /* Digital Input Output But TTL */ +#endif + +#ifndef ADDIDATA_ENABLE +#define ADDIDATA_ENABLE 1 +#define ADDIDATA_DISABLE 0 +#endif + +#define APCI16XX_TTL_INIT 0 +#define APCI16XX_TTL_INITDIRECTION 1 +#define APCI16XX_TTL_OUTPUTMEMORY 2 + +#define APCI16XX_TTL_READCHANNEL 0 +#define APCI16XX_TTL_READPORT 1 + +#define APCI16XX_TTL_WRITECHANNEL_ON 0 +#define APCI16XX_TTL_WRITECHANNEL_OFF 1 +#define APCI16XX_TTL_WRITEPORT_ON 2 +#define APCI16XX_TTL_WRITEPORT_OFF 3 + +#define APCI16XX_TTL_READ_ALL_INPUTS 0 +#define APCI16XX_TTL_READ_ALL_OUTPUTS 1 + +#ifdef __KERNEL__ + +static const comedi_lrange range_apci16xx_ttl = { 12, + {BIP_RANGE(1), + BIP_RANGE(1), + BIP_RANGE(1), + BIP_RANGE(1), + BIP_RANGE(1), + BIP_RANGE(1), + BIP_RANGE(1), + BIP_RANGE(1), + BIP_RANGE(1), + BIP_RANGE(1), + BIP_RANGE(1), + BIP_RANGE(1)} +}; + +/* ++----------------------------------------------------------------------------+ +| TTL INISIALISATION FUNCTION | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI16XX_InsnConfigInitTTLIO(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + +/* ++----------------------------------------------------------------------------+ +| TTL INPUT FUNCTION | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI16XX_InsnBitsReadTTLIO(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + +int i_APCI16XX_InsnReadTTLIOAllPortValue(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + +/* ++----------------------------------------------------------------------------+ +| TTL OUTPUT FUNCTIONS | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI16XX_InsnBitsWriteTTLIO(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + +int i_APCI16XX_Reset(comedi_device * dev); +#endif --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.c @@ -0,0 +1,1265 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-------------------------------+---------------------------------------+ + | Project : APCI-1710 | Compiler : GCC | + | Module name : hwdrv_apci1710.c| Version : 2.96 | + +-------------------------------+---------------------------------------+ + | Project manager: Eric Stolz | Date : 02/12/2002 | + +-------------------------------+---------------------------------------+ + | Description : Hardware Layer Acces For APCI-1710 | + +-----------------------------------------------------------------------+ + | UPDATES | + +----------+-----------+------------------------------------------------+ + | Date | Author | Description of updates | + +----------+-----------+------------------------------------------------+ + | | | | + | | | | + | | | | + +----------+-----------+------------------------------------------------+ +*/ +#include "hwdrv_APCI1710.h" +#include "APCI1710_Inp_cpt.c" + +#include "APCI1710_Ssi.c" +#include "APCI1710_Tor.c" +#include "APCI1710_Ttl.c" +#include "APCI1710_Dig_io.c" +#include "APCI1710_82x54.c" +#include "APCI1710_Chrono.c" +#include "APCI1710_Pwm.c" +#include "APCI1710_INCCPT.c" + +void i_ADDI_AttachPCI1710(comedi_device * dev) +{ + comedi_subdevice *s; + int ret = 0; + int n_subdevices = 9; + + //Update-0.7.57->0.7.68dev->n_subdevices = 9; + if ((ret = alloc_subdevices(dev, n_subdevices)) < 0) + return; + + // Allocate and Initialise Timer Subdevice Structures + s = dev->subdevices + 0; + + s->type = COMEDI_SUBD_TIMER; + s->subdev_flags = SDF_WRITEABLE | SDF_RT | SDF_GROUND | SDF_COMMON; + s->n_chan = 3; + s->maxdata = 0; + s->len_chanlist = 3; + s->range_table = &range_digital; + s->insn_write = i_APCI1710_InsnWriteEnableDisableTimer; + s->insn_read = i_APCI1710_InsnReadAllTimerValue; + s->insn_config = i_APCI1710_InsnConfigInitTimer; + s->insn_bits = i_APCI1710_InsnBitsTimer; + + // Allocate and Initialise DIO Subdevice Structures + s = dev->subdevices + 1; + + s->type = COMEDI_SUBD_DIO; + s->subdev_flags = + SDF_WRITEABLE | SDF_READABLE | SDF_RT | SDF_GROUND | SDF_COMMON; + s->n_chan = 7; + s->maxdata = 1; + s->len_chanlist = 7; + s->range_table = &range_digital; + s->insn_config = i_APCI1710_InsnConfigDigitalIO; + s->insn_read = i_APCI1710_InsnReadDigitalIOChlValue; + s->insn_bits = i_APCI1710_InsnBitsDigitalIOPortOnOff; + s->insn_write = i_APCI1710_InsnWriteDigitalIOChlOnOff; + + // Allocate and Initialise Chrono Subdevice Structures + s = dev->subdevices + 2; + + s->type = COMEDI_SUBD_CHRONO; + s->subdev_flags = SDF_WRITEABLE | SDF_RT | SDF_GROUND | SDF_COMMON; + s->n_chan = 4; + s->maxdata = 0; + s->len_chanlist = 4; + s->range_table = &range_digital; + s->insn_write = i_APCI1710_InsnWriteEnableDisableChrono; + s->insn_read = i_APCI1710_InsnReadChrono; + s->insn_config = i_APCI1710_InsnConfigInitChrono; + s->insn_bits = i_APCI1710_InsnBitsChronoDigitalIO; + + // Allocate and Initialise PWM Subdevice Structures + s = dev->subdevices + 3; + s->type = COMEDI_SUBD_PWM; + s->subdev_flags = + SDF_WRITEABLE | SDF_READABLE | SDF_RT | SDF_GROUND | SDF_COMMON; + s->n_chan = 3; + s->maxdata = 1; + s->len_chanlist = 3; + s->range_table = &range_digital; + s->io_bits = 0; //all bits input + s->insn_config = i_APCI1710_InsnConfigPWM; + s->insn_read = i_APCI1710_InsnReadGetPWMStatus; + s->insn_write = i_APCI1710_InsnWritePWM; + s->insn_bits = i_APCI1710_InsnBitsReadPWMInterrupt; + + // Allocate and Initialise TTLIO Subdevice Structures + s = dev->subdevices + 4; + s->type = COMEDI_SUBD_TTLIO; + s->subdev_flags = + SDF_WRITEABLE | SDF_READABLE | SDF_RT | SDF_GROUND | SDF_COMMON; + s->n_chan = 8; + s->maxdata = 1; + s->len_chanlist = 8; + s->range_table = &range_apci1710_ttl; // to pass arguments in range + s->insn_config = i_APCI1710_InsnConfigInitTTLIO; + s->insn_bits = i_APCI1710_InsnBitsReadTTLIO; + s->insn_write = i_APCI1710_InsnWriteSetTTLIOChlOnOff; + s->insn_read = i_APCI1710_InsnReadTTLIOAllPortValue; + + // Allocate and Initialise TOR Subdevice Structures + s = dev->subdevices + 5; + s->type = COMEDI_SUBD_TOR; + s->subdev_flags = + SDF_WRITEABLE | SDF_READABLE | SDF_RT | SDF_GROUND | SDF_COMMON; + s->n_chan = 8; + s->maxdata = 1; + s->len_chanlist = 8; + s->range_table = &range_digital; + s->io_bits = 0; //all bits input + s->insn_config = i_APCI1710_InsnConfigInitTorCounter; + s->insn_read = i_APCI1710_InsnReadGetTorCounterInitialisation; + s->insn_write = i_APCI1710_InsnWriteEnableDisableTorCounter; + s->insn_bits = i_APCI1710_InsnBitsGetTorCounterProgressStatusAndValue; + + // Allocate and Initialise SSI Subdevice Structures + s = dev->subdevices + 6; + s->type = COMEDI_SUBD_SSI; + s->subdev_flags = + SDF_WRITEABLE | SDF_READABLE | SDF_RT | SDF_GROUND | SDF_COMMON; + s->n_chan = 4; + s->maxdata = 1; + s->len_chanlist = 4; + s->range_table = &range_apci1710_ssi; + s->insn_config = i_APCI1710_InsnConfigInitSSI; + s->insn_read = i_APCI1710_InsnReadSSIValue; + s->insn_bits = i_APCI1710_InsnBitsSSIDigitalIO; + + // Allocate and Initialise PULSEENCODER Subdevice Structures + s = dev->subdevices + 7; + s->type = COMEDI_SUBD_PULSEENCODER; + s->subdev_flags = + SDF_WRITEABLE | SDF_READABLE | SDF_RT | SDF_GROUND | SDF_COMMON; + s->n_chan = 4; + s->maxdata = 1; + s->len_chanlist = 4; + s->range_table = &range_digital; + s->insn_config = i_APCI1710_InsnConfigInitPulseEncoder; + s->insn_write = i_APCI1710_InsnWriteEnableDisablePulseEncoder; + s->insn_bits = i_APCI1710_InsnBitsReadWritePulseEncoder; + s->insn_read = i_APCI1710_InsnReadInterruptPulseEncoder; + + // Allocate and Initialise INCREMENTALCOUNTER Subdevice Structures + s = dev->subdevices + 8; + s->type = COMEDI_SUBD_INCREMENTALCOUNTER; + s->subdev_flags = + SDF_WRITEABLE | SDF_READABLE | SDF_RT | SDF_GROUND | SDF_COMMON; + s->n_chan = 500; + s->maxdata = 1; + s->len_chanlist = 500; + s->range_table = &range_apci1710_inccpt; + s->insn_config = i_APCI1710_InsnConfigINCCPT; + s->insn_write = i_APCI1710_InsnWriteINCCPT; + s->insn_read = i_APCI1710_InsnReadINCCPT; + s->insn_bits = i_APCI1710_InsnBitsINCCPT; +} + +int i_APCI1710_Reset(comedi_device * dev); +VOID v_APCI1710_Interrupt(int irq, void *d); +//for 1710 + +int i_APCI1710_Reset(comedi_device * dev) +{ + int ret; + DWORD dw_Dummy; + + /*********************************/ + /* Read all module configuration */ + /*********************************/ + ret = inl(devpriv->s_BoardInfos.ui_Address + 60); + devpriv->s_BoardInfos.dw_MolduleConfiguration[0] = ret; + + ret = inl(devpriv->s_BoardInfos.ui_Address + 124); + devpriv->s_BoardInfos.dw_MolduleConfiguration[1] = ret; + + ret = inl(devpriv->s_BoardInfos.ui_Address + 188); + devpriv->s_BoardInfos.dw_MolduleConfiguration[2] = ret; + + ret = inl(devpriv->s_BoardInfos.ui_Address + 252); + devpriv->s_BoardInfos.dw_MolduleConfiguration[3] = ret; + + // outl(0x80808082,devpriv->s_BoardInfos.ui_Address+0x60); + outl(0x83838383, devpriv->s_BoardInfos.ui_Address + 0x60); + + devpriv->s_BoardInfos.b_BoardVersion = 1; + + // Enable the interrupt for the controler + dw_Dummy = inl(devpriv->s_BoardInfos.ui_Address + 0x38); + outl(dw_Dummy | 0x2000, devpriv->s_BoardInfos.ui_Address + 0x38); + + return 0; +} + +/* ++----------------------------------------------------------------------------+ +| Function's Name : __VOID__ v_APCI1710_InterruptFunction | +| (BYTE b_Interrupt, __CPPARGS) | ++----------------------------------------------------------------------------+ +| Task : APCI-1710 interrupt function | ++----------------------------------------------------------------------------+ +| Input Parameters : BYTE b_Interrupt : Interrupt number | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0 : OK | +| -1 : Error | ++----------------------------------------------------------------------------+ +*/ + +VOID v_APCI1710_Interrupt(int irq, void *d) +{ + comedi_device *dev = d; + BYTE b_ModuleCpt = 0; + BYTE b_InterruptFlag = 0; + BYTE b_PWMCpt = 0; + BYTE b_TorCounterCpt = 0; + BYTE b_PulseIncoderCpt = 0; + UINT ui_16BitValue; + ULONG ul_InterruptLatchReg = 0; + ULONG ul_LatchRegisterValue = 0; + ULONG ul_82X54InterruptStatus; + ULONG ul_StatusRegister; + + str_ModuleInfo *ps_ModuleInfo; + + printk("APCI1710 Interrupt\n"); + for (b_ModuleCpt = 0; b_ModuleCpt < 4; b_ModuleCpt++, ps_ModuleInfo++) { + + /**************************/ + /* 1199/0225 to 0100/0226 */ + /**************************/ + ps_ModuleInfo = &devpriv->s_ModuleInfo[b_ModuleCpt]; + + /***********************/ + /* Test if 82X54 timer */ + /***********************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModuleCpt] & + 0xFFFF0000UL) == APCI1710_82X54_TIMER) { + + //printk("TIMER Interrupt Occurred\n"); + ul_82X54InterruptStatus = inl(devpriv->s_BoardInfos. + ui_Address + 12 + (64 * b_ModuleCpt)); + + /***************************/ + /* Test if interrupt occur */ + /***************************/ + + if ((ul_82X54InterruptStatus & ps_ModuleInfo-> + s_82X54ModuleInfo. + b_InterruptMask) != 0) { + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters[devpriv-> + s_InterruptParameters. + ui_Write]. + ul_OldInterruptMask = + (ul_82X54InterruptStatus & + ps_ModuleInfo->s_82X54ModuleInfo. + b_InterruptMask) << 4; + + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters[devpriv-> + s_InterruptParameters. + ui_Write]. + b_OldModuleMask = 1 << b_ModuleCpt; + + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters[devpriv-> + s_InterruptParameters. + ui_Write].ul_OldCounterLatchValue = 0; + + devpriv-> + s_InterruptParameters. + ul_InterruptOccur++; + + /****************************/ + /* Increment the write FIFO */ + /****************************/ + + devpriv-> + s_InterruptParameters. + ui_Write = (devpriv-> + s_InterruptParameters. + ui_Write + 1) % APCI1710_SAVE_INTERRUPT; + + b_InterruptFlag = 1; + + /**********************/ + /* Call user function */ + /**********************/ + //Send a signal to from kernel to user space + send_sig(SIGIO, devpriv->tsk_Current, 0); + + } // if ((ul_82X54InterruptStatus & 0x7) != 0) + } // 82X54 timer + + /***************************/ + /* Test if increm. counter */ + /***************************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModuleCpt] & + 0xFFFF0000UL) == APCI1710_INCREMENTAL_COUNTER) { + + ul_InterruptLatchReg = inl(devpriv->s_BoardInfos. + ui_Address + (64 * b_ModuleCpt)); + + /*********************/ + /* Test if interrupt */ + /*********************/ + + if ((ul_InterruptLatchReg & 0x22) && (ps_ModuleInfo-> + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister2 & 0x80)) { + /************************************/ + /* Test if strobe latch I interrupt */ + /************************************/ + + if (ul_InterruptLatchReg & 2) { + ul_LatchRegisterValue = + inl(devpriv->s_BoardInfos. + ui_Address + 4 + + (64 * b_ModuleCpt)); + + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters + [devpriv->s_InterruptParameters. + ui_Write].ul_OldInterruptMask = + 1UL; + + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters + [devpriv->s_InterruptParameters. + ui_Write].b_OldModuleMask = + 1 << b_ModuleCpt; + + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters + [devpriv->s_InterruptParameters. + ui_Write]. + ul_OldCounterLatchValue = + ul_LatchRegisterValue; + + devpriv-> + s_InterruptParameters. + ul_InterruptOccur++; + + /****************************/ + /* 0899/0224 to 1199/0225 */ + /****************************/ + /* Increment the write FIFO */ + /****************************/ + + devpriv-> + s_InterruptParameters. + ui_Write = (devpriv-> + s_InterruptParameters. + ui_Write + + 1) % APCI1710_SAVE_INTERRUPT; + + b_InterruptFlag = 1; + + /**********************/ + /* Call user function */ + /**********************/ + //Send a signal to from kernel to user space + send_sig(SIGIO, devpriv->tsk_Current, + 0); + + } + + /*************************************/ + /* Test if strobe latch II interrupt */ + /*************************************/ + + if (ul_InterruptLatchReg & 0x20) { + + ul_LatchRegisterValue = + inl(devpriv->s_BoardInfos. + ui_Address + 8 + + (64 * b_ModuleCpt)); + + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters + [devpriv->s_InterruptParameters. + ui_Write].ul_OldInterruptMask = + 2UL; + + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters + [devpriv->s_InterruptParameters. + ui_Write].b_OldModuleMask = + 1 << b_ModuleCpt; + + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters + [devpriv->s_InterruptParameters. + ui_Write]. + ul_OldCounterLatchValue = + ul_LatchRegisterValue; + + devpriv-> + s_InterruptParameters. + ul_InterruptOccur++; + + /****************************/ + /* 0899/0224 to 1199/0225 */ + /****************************/ + /* Increment the write FIFO */ + /****************************/ + + devpriv-> + s_InterruptParameters. + ui_Write = (devpriv-> + s_InterruptParameters. + ui_Write + + 1) % APCI1710_SAVE_INTERRUPT; + + b_InterruptFlag = 1; + + /**********************/ + /* Call user function */ + /**********************/ + //Send a signal to from kernel to user space + send_sig(SIGIO, devpriv->tsk_Current, + 0); + + } + } + + ul_InterruptLatchReg = inl(devpriv->s_BoardInfos. + ui_Address + 24 + (64 * b_ModuleCpt)); + + /***************************/ + /* Test if index interrupt */ + /***************************/ + + if (ul_InterruptLatchReg & 0x8) { + ps_ModuleInfo-> + s_SiemensCounterInfo. + s_InitFlag.b_IndexInterruptOccur = 1; + + if (ps_ModuleInfo-> + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister2 & + APCI1710_INDEX_AUTO_MODE) { + + outl(ps_ModuleInfo-> + s_SiemensCounterInfo. + s_ModeRegister. + dw_ModeRegister1_2_3_4, + devpriv->s_BoardInfos. + ui_Address + 20 + + (64 * b_ModuleCpt)); + } + + /*****************************/ + /* Test if interrupt enabled */ + /*****************************/ + + if ((ps_ModuleInfo-> + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister3 & + APCI1710_ENABLE_INDEX_INT) == + APCI1710_ENABLE_INDEX_INT) { + devpriv->s_InterruptParameters. + s_FIFOInterruptParameters + [devpriv->s_InterruptParameters. + ui_Write].ul_OldInterruptMask = + 4UL; + + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters + [devpriv->s_InterruptParameters. + ui_Write].b_OldModuleMask = + 1 << b_ModuleCpt; + + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters + [devpriv->s_InterruptParameters. + ui_Write]. + ul_OldCounterLatchValue = + ul_LatchRegisterValue; + + devpriv-> + s_InterruptParameters. + ul_InterruptOccur++; + + /****************************/ + /* 0899/0224 to 1199/0225 */ + /****************************/ + /* Increment the write FIFO */ + /****************************/ + + devpriv-> + s_InterruptParameters. + ui_Write = (devpriv-> + s_InterruptParameters. + ui_Write + + 1) % APCI1710_SAVE_INTERRUPT; + + b_InterruptFlag = 1; + + /**********************/ + /* Call user function */ + /**********************/ + //Send a signal to from kernel to user space + send_sig(SIGIO, devpriv->tsk_Current, + 0); + + } + } + + /*****************************/ + /* Test if compare interrupt */ + /*****************************/ + + if (ul_InterruptLatchReg & 0x10) { + /*****************************/ + /* Test if interrupt enabled */ + /*****************************/ + + if ((ps_ModuleInfo-> + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister3 & + APCI1710_ENABLE_COMPARE_INT) == + APCI1710_ENABLE_COMPARE_INT) { + devpriv->s_InterruptParameters. + s_FIFOInterruptParameters + [devpriv->s_InterruptParameters. + ui_Write].ul_OldInterruptMask = + 8UL; + + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters + [devpriv->s_InterruptParameters. + ui_Write].b_OldModuleMask = + 1 << b_ModuleCpt; + + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters + [devpriv->s_InterruptParameters. + ui_Write]. + ul_OldCounterLatchValue = + ul_LatchRegisterValue; + + devpriv-> + s_InterruptParameters. + ul_InterruptOccur++; + + /****************************/ + /* 0899/0224 to 1199/0225 */ + /****************************/ + /* Increment the write FIFO */ + /****************************/ + + devpriv-> + s_InterruptParameters. + ui_Write = (devpriv-> + s_InterruptParameters. + ui_Write + + 1) % APCI1710_SAVE_INTERRUPT; + + b_InterruptFlag = 1; + + /**********************/ + /* Call user function */ + /**********************/ + //Send a signal to from kernel to user space + send_sig(SIGIO, devpriv->tsk_Current, + 0); + + } + } + + /*******************************************/ + /* Test if frequency measurement interrupt */ + /*******************************************/ + + if (ul_InterruptLatchReg & 0x20) { + /*******************/ + /* Read the status */ + /*******************/ + + ul_StatusRegister = inl(devpriv->s_BoardInfos. + ui_Address + 32 + (64 * b_ModuleCpt)); + + /******************/ + /* Read the value */ + /******************/ + + ul_LatchRegisterValue = + inl(devpriv->s_BoardInfos.ui_Address + + 28 + (64 * b_ModuleCpt)); + + switch ((ul_StatusRegister >> 1) & 3) { + case 0: + /*************************/ + /* Test the counter mode */ + /*************************/ + + if ((devpriv->s_ModuleInfo[b_ModuleCpt]. + s_SiemensCounterInfo. + s_ModeRegister. + s_ByteModeRegister. + b_ModeRegister1 & + APCI1710_16BIT_COUNTER) + == APCI1710_16BIT_COUNTER) { + /****************************************/ + /* Test if 16-bit counter 1 pulse occur */ + /****************************************/ + + if ((ul_LatchRegisterValue & + 0xFFFFU) != 0) { + ui_16BitValue = + (UINT) + ul_LatchRegisterValue + & 0xFFFFU; + ul_LatchRegisterValue = + (ul_LatchRegisterValue + & 0xFFFF0000UL) + | (0xFFFFU - + ui_16BitValue); + } + + /****************************************/ + /* Test if 16-bit counter 2 pulse occur */ + /****************************************/ + + if ((ul_LatchRegisterValue & + 0xFFFF0000UL) != + 0) { + ui_16BitValue = + (UINT) ( + (ul_LatchRegisterValue + >> 16) & + 0xFFFFU); + ul_LatchRegisterValue = + (ul_LatchRegisterValue + & 0xFFFFUL) | + ((0xFFFFU - + ui_16BitValue) + << 16); + } + } else { + if (ul_LatchRegisterValue != 0) { + ul_LatchRegisterValue = + 0xFFFFFFFFUL - + ul_LatchRegisterValue; + } + } + break; + + case 1: + /****************************************/ + /* Test if 16-bit counter 2 pulse occur */ + /****************************************/ + + if ((ul_LatchRegisterValue & + 0xFFFF0000UL) != 0) { + ui_16BitValue = + (UINT) ( + (ul_LatchRegisterValue + >> 16) & + 0xFFFFU); + ul_LatchRegisterValue = + (ul_LatchRegisterValue & + 0xFFFFUL) | ((0xFFFFU - + ui_16BitValue) + << 16); + } + break; + + case 2: + /****************************************/ + /* Test if 16-bit counter 1 pulse occur */ + /****************************************/ + + if ((ul_LatchRegisterValue & 0xFFFFU) != + 0) { + ui_16BitValue = + (UINT) + ul_LatchRegisterValue & + 0xFFFFU; + ul_LatchRegisterValue = + (ul_LatchRegisterValue & + 0xFFFF0000UL) | (0xFFFFU + - ui_16BitValue); + } + break; + } + + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters[devpriv-> + s_InterruptParameters. + ui_Write]. + ul_OldInterruptMask = 0x10000UL; + + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters[devpriv-> + s_InterruptParameters. + ui_Write]. + b_OldModuleMask = 1 << b_ModuleCpt; + + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters[devpriv-> + s_InterruptParameters. + ui_Write]. + ul_OldCounterLatchValue = + ul_LatchRegisterValue; + + devpriv-> + s_InterruptParameters. + ul_InterruptOccur++; + + /****************************/ + /* 0899/0224 to 1199/0225 */ + /****************************/ + /* Increment the write FIFO */ + /****************************/ + + devpriv-> + s_InterruptParameters. + ui_Write = (devpriv-> + s_InterruptParameters. + ui_Write + 1) % APCI1710_SAVE_INTERRUPT; + + b_InterruptFlag = 1; + + /**********************/ + /* Call user function */ + /**********************/ + //Send a signal to from kernel to user space + send_sig(SIGIO, devpriv->tsk_Current, 0); + + } + } // Incremental counter + + /***************/ + /* Test if CDA */ + /***************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModuleCpt] & + 0xFFFF0000UL) == APCI1710_CDA) { + /******************************************/ + /* Test if CDA enable and functionality 0 */ + /******************************************/ + + if ((devpriv->s_ModuleInfo[b_ModuleCpt]. + s_CDAModuleInfo. + b_CDAEnable == APCI1710_ENABLE) + && (devpriv->s_ModuleInfo[b_ModuleCpt]. + s_CDAModuleInfo.b_FctSelection == 0)) { + /****************************/ + /* Get the interrupt status */ + /****************************/ + + ul_StatusRegister = inl(devpriv->s_BoardInfos. + ui_Address + 16 + (64 * b_ModuleCpt)); + /***************************/ + /* Test if interrupt occur */ + /***************************/ + + if (ul_StatusRegister & 1) { + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters + [devpriv->s_InterruptParameters. + ui_Write].ul_OldInterruptMask = + 0x80000UL; + + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters + [devpriv->s_InterruptParameters. + ui_Write].b_OldModuleMask = + 1 << b_ModuleCpt; + + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters + [devpriv->s_InterruptParameters. + ui_Write]. + ul_OldCounterLatchValue = 0; + + devpriv-> + s_InterruptParameters. + ul_InterruptOccur++; + + /****************************/ + /* Increment the write FIFO */ + /****************************/ + + devpriv-> + s_InterruptParameters. + ui_Write = (devpriv-> + s_InterruptParameters. + ui_Write + + 1) % APCI1710_SAVE_INTERRUPT; + + b_InterruptFlag = 1; + + /**********************/ + /* Call user function */ + /**********************/ + + //Send a signal to from kernel to user space + send_sig(SIGIO, devpriv->tsk_Current, + 0); + + } // if (ul_StatusRegister & 1) + + } + } // CDA + + /***********************/ + /* Test if PWM counter */ + /***********************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModuleCpt] & + 0xFFFF0000UL) == APCI1710_PWM) { + for (b_PWMCpt = 0; b_PWMCpt < 2; b_PWMCpt++) { + /*************************************/ + /* Test if PWM interrupt initialised */ + /*************************************/ + + if (devpriv-> + s_ModuleInfo[b_ModuleCpt]. + s_PWMModuleInfo. + s_PWMInfo[b_PWMCpt]. + b_InterruptEnable == APCI1710_ENABLE) { + /*****************************/ + /* Read the interrupt status */ + /*****************************/ + + ul_StatusRegister = + inl(devpriv->s_BoardInfos. + ui_Address + 16 + + (20 * b_PWMCpt) + + (64 * b_ModuleCpt)); + + /***************************/ + /* Test if interrupt occur */ + /***************************/ + + if (ul_StatusRegister & 0x1) { + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters + [devpriv-> + s_InterruptParameters. + ui_Write]. + ul_OldInterruptMask = + 0x4000UL << b_PWMCpt; + + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters + [devpriv-> + s_InterruptParameters. + ui_Write]. + b_OldModuleMask = + 1 << b_ModuleCpt; + + devpriv-> + s_InterruptParameters. + ul_InterruptOccur++; + + /****************************/ + /* Increment the write FIFO */ + /****************************/ + + devpriv-> + s_InterruptParameters. + ui_Write = (devpriv-> + s_InterruptParameters. + ui_Write + + 1) % + APCI1710_SAVE_INTERRUPT; + + b_InterruptFlag = 1; + + /**********************/ + /* Call user function */ + /**********************/ + //Send a signal to from kernel to user space + send_sig(SIGIO, + devpriv->tsk_Current, + 0); + + } // if (ul_StatusRegister & 0x1) + } // if (APCI1710_ENABLE) + } // for (b_PWMCpt == 0; b_PWMCpt < 0; b_PWMCpt ++) + } // PWM counter + + /***********************/ + /* Test if tor counter */ + /***********************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModuleCpt] & + 0xFFFF0000UL) == APCI1710_TOR_COUNTER) { + for (b_TorCounterCpt = 0; b_TorCounterCpt < 2; + b_TorCounterCpt++) { + /*************************************/ + /* Test if tor interrupt initialised */ + /*************************************/ + + if (devpriv-> + s_ModuleInfo[b_ModuleCpt]. + s_TorCounterModuleInfo. + s_TorCounterInfo[b_TorCounterCpt]. + b_InterruptEnable == APCI1710_ENABLE) { + /*****************************/ + /* Read the interrupt status */ + /*****************************/ + + ul_StatusRegister = + inl(devpriv->s_BoardInfos. + ui_Address + 12 + + (16 * b_TorCounterCpt) + + (64 * b_ModuleCpt)); + + /***************************/ + /* Test if interrupt occur */ + /***************************/ + + if (ul_StatusRegister & 0x1) { + /******************************/ + /* Read the tor counter value */ + /******************************/ + + ul_LatchRegisterValue = + inl(devpriv-> + s_BoardInfos. + ui_Address + 0 + + (16 * b_TorCounterCpt) + + (64 * b_ModuleCpt)); + + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters + [devpriv-> + s_InterruptParameters. + ui_Write]. + ul_OldInterruptMask = + 0x1000UL << + b_TorCounterCpt; + + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters + [devpriv-> + s_InterruptParameters. + ui_Write]. + b_OldModuleMask = + 1 << b_ModuleCpt; + + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters + [devpriv-> + s_InterruptParameters. + ui_Write]. + ul_OldCounterLatchValue + = ul_LatchRegisterValue; + + devpriv-> + s_InterruptParameters. + ul_InterruptOccur++; + + /****************************/ + /* Increment the write FIFO */ + /****************************/ + + devpriv-> + s_InterruptParameters. + ui_Write = (devpriv-> + s_InterruptParameters. + ui_Write + + 1) % + APCI1710_SAVE_INTERRUPT; + + b_InterruptFlag = 1; + + /**********************/ + /* Call user function */ + /**********************/ + + //Send a signal to from kernel to user space + send_sig(SIGIO, + devpriv->tsk_Current, + 0); + } // if (ul_StatusRegister & 0x1) + } // if (APCI1710_ENABLE) + } // for (b_TorCounterCpt == 0; b_TorCounterCpt < 0; b_TorCounterCpt ++) + } // Tor counter + + /***********************/ + /* Test if chronometer */ + /***********************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModuleCpt] & + 0xFFFF0000UL) == APCI1710_CHRONOMETER) { + + //printk("APCI1710 Chrono Interrupt\n"); + /*****************************/ + /* Read the interrupt status */ + /*****************************/ + + ul_InterruptLatchReg = inl(devpriv->s_BoardInfos. + ui_Address + 12 + (64 * b_ModuleCpt)); + + /***************************/ + /* Test if interrupt occur */ + /***************************/ + + if ((ul_InterruptLatchReg & 0x8) == 0x8) { + /****************************/ + /* Clear the interrupt flag */ + /****************************/ + + outl(0, devpriv->s_BoardInfos. + ui_Address + 32 + (64 * b_ModuleCpt)); + + /***************************/ + /* Test if continuous mode */ + /***************************/ + + if (ps_ModuleInfo-> + s_ChronoModuleInfo. + b_CycleMode == APCI1710_ENABLE) { + /********************/ + /* Clear the status */ + /********************/ + + outl(0, devpriv->s_BoardInfos. + ui_Address + 36 + + (64 * b_ModuleCpt)); + } + + /*************************/ + /* Read the timing value */ + /*************************/ + + ul_LatchRegisterValue = + inl(devpriv->s_BoardInfos.ui_Address + + 4 + (64 * b_ModuleCpt)); + + /*****************************/ + /* Test if interrupt enabled */ + /*****************************/ + + if (ps_ModuleInfo-> + s_ChronoModuleInfo.b_InterruptMask) { + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters + [devpriv->s_InterruptParameters. + ui_Write].ul_OldInterruptMask = + 0x80; + + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters + [devpriv->s_InterruptParameters. + ui_Write].b_OldModuleMask = + 1 << b_ModuleCpt; + + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters + [devpriv->s_InterruptParameters. + ui_Write]. + ul_OldCounterLatchValue = + ul_LatchRegisterValue; + + devpriv-> + s_InterruptParameters. + ul_InterruptOccur++; + + /****************************/ + /* Increment the write FIFO */ + /****************************/ + + devpriv-> + s_InterruptParameters. + ui_Write = (devpriv-> + s_InterruptParameters. + ui_Write + + 1) % APCI1710_SAVE_INTERRUPT; + + b_InterruptFlag = 1; + + /**********************/ + /* Call user function */ + /**********************/ + //Send a signal to from kernel to user space + send_sig(SIGIO, devpriv->tsk_Current, + 0); + + } + } + } // Chronometer + + /*************************/ + /* Test if pulse encoder */ + /*************************/ + + if ((devpriv->s_BoardInfos. + dw_MolduleConfiguration[b_ModuleCpt] & + 0xFFFF0000UL) == APCI1710_PULSE_ENCODER) { + /****************************/ + /* Read the status register */ + /****************************/ + + ul_StatusRegister = inl(devpriv->s_BoardInfos. + ui_Address + 20 + (64 * b_ModuleCpt)); + + if (ul_StatusRegister & 0xF) { + for (b_PulseIncoderCpt = 0; + b_PulseIncoderCpt < 4; + b_PulseIncoderCpt++) { + /*************************************/ + /* Test if pulse encoder initialised */ + /*************************************/ + + if ((ps_ModuleInfo-> + s_PulseEncoderModuleInfo. + s_PulseEncoderInfo + [b_PulseIncoderCpt]. + b_PulseEncoderInit == 1) + && (((ps_ModuleInfo->s_PulseEncoderModuleInfo.dw_SetRegister >> b_PulseIncoderCpt) & 1) == 1) && (((ul_StatusRegister >> (b_PulseIncoderCpt)) & 1) == 1)) { + devpriv->s_InterruptParameters. + s_FIFOInterruptParameters + [devpriv-> + s_InterruptParameters. + ui_Write]. + ul_OldInterruptMask = + 0x100UL << + b_PulseIncoderCpt; + + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters + [devpriv-> + s_InterruptParameters. + ui_Write]. + b_OldModuleMask = + 1 << b_ModuleCpt; + + devpriv-> + s_InterruptParameters. + s_FIFOInterruptParameters + [devpriv-> + s_InterruptParameters. + ui_Write]. + ul_OldCounterLatchValue + = ul_LatchRegisterValue; + + devpriv-> + s_InterruptParameters. + ul_InterruptOccur++; + + /****************************/ + /* 0899/0224 to 1199/0225 */ + /****************************/ + /* Increment the write FIFO */ + /****************************/ + + devpriv-> + s_InterruptParameters. + ui_Write = (devpriv-> + s_InterruptParameters. + ui_Write + + 1) % + APCI1710_SAVE_INTERRUPT; + + b_InterruptFlag = 1; + + /**********************/ + /* Call user function */ + /**********************/ + //Send a signal to from kernel to user space + send_sig(SIGIO, + devpriv->tsk_Current, + 0); + + } + } + } + } //pulse encoder + + } + return; + +} --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.h @@ -0,0 +1,78 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ + +#define COMEDI_SUBD_TTLIO 11 /* Digital Input Output But TTL */ +#define COMEDI_SUBD_PWM 12 /* Pulse width Measurement */ +#define COMEDI_SUBD_SSI 13 /* Synchronous serial interface */ +#define COMEDI_SUBD_TOR 14 /* Tor counter */ +#define COMEDI_SUBD_CHRONO 15 /* Chrono meter */ +#define COMEDI_SUBD_PULSEENCODER 16 /* Pulse Encoder INP CPT */ +#define COMEDI_SUBD_INCREMENTALCOUNTER 17 /* Incremental Counter */ + +#define APCI1710_BOARD_NAME "apci1710" +#define APCI1710_BOARD_VENDOR_ID 0x10E8 +#define APCI1710_BOARD_DEVICE_ID 0x818F +#define APCI1710_ADDRESS_RANGE 256 +#define APCI1710_CONFIG_ADDRESS_RANGE 8 +#define APCI1710_INCREMENTAL_COUNTER 0x53430000UL +#define APCI1710_SSI_COUNTER 0x53490000UL +#define APCI1710_TTL_IO 0x544C0000UL +#define APCI1710_DIGITAL_IO 0x44490000UL +#define APCI1710_82X54_TIMER 0x49430000UL +#define APCI1710_CHRONOMETER 0x43480000UL +#define APCI1710_PULSE_ENCODER 0x495A0000UL +#define APCI1710_TOR_COUNTER 0x544F0000UL +#define APCI1710_PWM 0x50570000UL +#define APCI1710_ETM 0x45540000UL +#define APCI1710_CDA 0x43440000UL +#define APCI1710_DISABLE 0 +#define APCI1710_ENABLE 1 +#define APCI1710_SYNCHRONOUS_MODE 1 +#define APCI1710_ASYNCHRONOUS_MODE 0 + +//MODULE INFO STRUCTURE + +static const comedi_lrange range_apci1710_ttl = { 4, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2), + BIP_RANGE(1) + } +}; + +static const comedi_lrange range_apci1710_ssi = { 4, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2), + BIP_RANGE(1) + } +}; + +static const comedi_lrange range_apci1710_inccpt = { 4, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2), + BIP_RANGE(1) + } +}; --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.c @@ -0,0 +1,460 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-------------------------------+---------------------------------------+ + | Project : APCI-2016 | Compiler : GCC | + | Module name : hwdrv_apci2016.c| Version : 2.96 | + +-------------------------------+---------------------------------------+ + | Project manager: Eric Stolz | Date : 02/12/2002 | + +-------------------------------+---------------------------------------+ + | Description : Hardware Layer Acces For APCI-2016 | + +-----------------------------------------------------------------------+ + | UPDATES | + +----------+-----------+------------------------------------------------+ + | Date | Author | Description of updates | + +----------+-----------+------------------------------------------------+ + | | | | + | | | | + | | | | + +----------+-----------+------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Included files | ++----------------------------------------------------------------------------+ +*/ +#include "hwdrv_apci2016.h" + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI2016_ConfigDigitalOutput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Configures The Digital Output Subdevice. | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT *data : Data Pointer contains | +| configuration parameters as below | +| | +| data[0] : 1 Digital Memory On | +| 0 Digital Memory Off | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +int i_APCI2016_ConfigDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + if ((data[0] != 0) && (data[0] != 1)) { + comedi_error(dev, + "Not a valid Data !!! ,Data should be 1 or 0\n"); + return -EINVAL; + } // if ((data[0]!=0) && (data[0]!=1)) + if (data[0]) { + devpriv->b_OutputMemoryStatus = ADDIDATA_ENABLE; + } // if (data[0] + else { + devpriv->b_OutputMemoryStatus = ADDIDATA_DISABLE; + } // else if (data[0] + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI2016_WriteDigitalOutput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Writes port value To the selected port | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT ui_NoOfChannels : No Of Channels To Write | +| UINT *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +int i_APCI2016_WriteDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_NoOfChannel; + UINT ui_Temp, ui_Temp1; + ui_NoOfChannel = CR_CHAN(insn->chanspec); + if ((ui_NoOfChannel < 0) || (ui_NoOfChannel > 15)) { + comedi_error(dev, + "Invalid Channel Numbers !!!, Channel Numbers must be between 0 and 15\n"); + return -EINVAL; + } // if ((ui_NoOfChannel<0) || (ui_NoOfChannel>15)) + if (devpriv->b_OutputMemoryStatus) { + ui_Temp = inw(devpriv->iobase + APCI2016_DIGITAL_OP); + } // if (devpriv->b_OutputMemoryStatus ) + else { + ui_Temp = 0; + } // else if (devpriv->b_OutputMemoryStatus ) + if ((data[1] != 0) && (data[1] != 1)) { + comedi_error(dev, + "Invalid Data[1] value !!!, Data[1] should be 0 or 1\n"); + return -EINVAL; + } // if ((data[1]!=0) && (data[1]!=1)) + + if (data[3] == 0) { + if (data[1] == 0) { + data[0] = (data[0] << ui_NoOfChannel) | ui_Temp; + outw(data[0], devpriv->iobase + APCI2016_DIGITAL_OP); + } // if (data[1]==0) + else { + if (data[1] == 1) { + switch (ui_NoOfChannel) { + case 2: + data[0] = + (data[0] << (2 * + data[2])) | ui_Temp; + break; + case 4: + data[0] = + (data[0] << (4 * + data[2])) | ui_Temp; + break; + case 8: + data[0] = + (data[0] << (8 * + data[2])) | ui_Temp; + break; + case 15: + data[0] = data[0] | ui_Temp; + break; + default: + comedi_error(dev, " chan spec wrong"); + return -EINVAL; // "sorry channel spec wrong " + } //switch(ui_NoOfChannels) + outw(data[0], + devpriv->iobase + APCI2016_DIGITAL_OP); + } // if (data[1]==1) + else { + printk("\nSpecified channel not supported\n"); + } // else if (data[1]==1) + } // else if (data[1]==0) + } // if (data[3]==0) + else { + if (data[3] == 1) { + if (data[1] == 0) { + data[0] = ~data[0] & 0x1; + ui_Temp1 = 1; + ui_Temp1 = ui_Temp1 << ui_NoOfChannel; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = (data[0] << ui_NoOfChannel) ^ 0xffff; + data[0] = data[0] & ui_Temp; + outw(data[0], + devpriv->iobase + APCI2016_DIGITAL_OP); + } // if (data[1]==0) + else { + if (data[1] == 1) { + switch (ui_NoOfChannel) { + case 2: + data[0] = ~data[0] & 0x3; + ui_Temp1 = 3; + ui_Temp1 = + ui_Temp1 << 2 * data[2]; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = + ((data[0] << (2 * + data + [2])) ^ + 0xffff) & ui_Temp; + break; + case 4: + data[0] = ~data[0] & 0xf; + ui_Temp1 = 15; + ui_Temp1 = + ui_Temp1 << 4 * data[2]; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = + ((data[0] << (4 * + data + [2])) ^ + 0xffff) & ui_Temp; + break; + case 8: + data[0] = ~data[0] & 0xff; + ui_Temp1 = 255; + ui_Temp1 = + ui_Temp1 << 8 * data[2]; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = + ((data[0] << (8 * + data + [2])) ^ + 0xffff) & ui_Temp; + break; + case 15: + break; + default: + comedi_error(dev, + " chan spec wrong"); + return -EINVAL; // "sorry channel spec wrong " + } //switch(ui_NoOfChannels) + outw(data[0], + devpriv->iobase + + APCI2016_DIGITAL_OP); + } // if(data[1]==1) + else { + printk("\nSpecified channel not supported\n"); + } //else if(data[1]==1) + } //elseif(data[1]==0) + } //if(data[3]==1); + else { + printk("\nSpecified functionality does not exist\n"); + return -EINVAL; + } //if else data[3]==1) + } //if else data[3]==0) + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI2016_BitsDigitalOutput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Read value of the selected channel or port | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT ui_NoOfChannels : No Of Channels To read | +| UINT *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +int i_APCI2016_BitsDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_Temp; + UINT ui_NoOfChannel; + ui_NoOfChannel = CR_CHAN(insn->chanspec); + if ((ui_NoOfChannel < 0) || (ui_NoOfChannel > 15)) { + comedi_error(dev, + "Invalid Channel Numbers !!!, Channel Numbers must be between 0 and 15\n"); + return -EINVAL; + } // if ((ui_NoOfChannel<0) || (ui_NoOfChannel>15)) + if ((data[0] != 0) && (data[0] != 1)) { + comedi_error(dev, + "Invalid Data[0] value !!!, Data[0] should be 0 or 1\n"); + return -EINVAL; + } // if ((data[0]!=0) && (data[0]!=1)) + ui_Temp = data[0]; + *data = inw(devpriv->iobase + APCI2016_DIGITAL_OP_RW); + if (ui_Temp == 0) { + *data = (*data >> ui_NoOfChannel) & 0x1; + } // if (ui_Temp==0) + else { + if (ui_Temp == 1) { + switch (ui_NoOfChannel) { + case 2: + *data = (*data >> (2 * data[1])) & 3; + break; + + case 4: + *data = (*data >> (4 * data[1])) & 15; + break; + + case 8: + *data = (*data >> (8 * data[1])) & 255; + break; + + case 15: + break; + + default: + comedi_error(dev, " chan spec wrong"); + return -EINVAL; // "sorry channel spec wrong " + } //switch(ui_NoOfChannel) + } // if (ui_Temp==1) + else { + printk("\nSpecified channel not supported \n"); + } // else if (ui_Temp==1) + } // if (ui_Temp==0) + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI2016_ConfigWatchdog | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Configures The Watchdog | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| comedi_subdevice *s, :pointer to subdevice structure | +| comedi_insn *insn :pointer to insn structure | +| lsampl_t *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +int i_APCI2016_ConfigWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + + if (data[0] == 0) { + //Disable the watchdog + outw(0x0, + devpriv->i_IobaseAddon + + APCI2016_WATCHDOG_ENABLEDISABLE); + //Loading the Reload value + outw(data[1], + devpriv->i_IobaseAddon + + APCI2016_WATCHDOG_RELOAD_VALUE); + data[1] = data[1] >> 16; + outw(data[1], + devpriv->i_IobaseAddon + + APCI2016_WATCHDOG_RELOAD_VALUE + 2); + } else { + printk("\nThe input parameters are wrong\n"); + } + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI2016_StartStopWriteWatchdog | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Start / Stop The Watchdog | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| comedi_subdevice *s, :pointer to subdevice structure | +| comedi_insn *insn :pointer to insn structure | +| lsampl_t *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +int i_APCI2016_StartStopWriteWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + + switch (data[0]) { + case 0: //stop the watchdog + outw(0x0, devpriv->i_IobaseAddon + APCI2016_WATCHDOG_ENABLEDISABLE); //disable the watchdog + break; + case 1: //start the watchdog + outw(0x0001, + devpriv->i_IobaseAddon + + APCI2016_WATCHDOG_ENABLEDISABLE); + break; + case 2: //Software trigger + outw(0x0201, + devpriv->i_IobaseAddon + + APCI2016_WATCHDOG_ENABLEDISABLE); + break; + default: + printk("\nSpecified functionality does not exist\n"); + return -EINVAL; + } // switch(data[0]) + + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI2016_ReadWatchdog | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Read The Watchdog | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| comedi_subdevice *s, :pointer to subdevice structure | +| comedi_insn *insn :pointer to insn structure | +| lsampl_t *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI2016_ReadWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + udelay(5); + data[0] = inw(devpriv->i_IobaseAddon + APCI2016_WATCHDOG_STATUS) & 0x1; + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI2016_Reset(comedi_device *dev) | | ++----------------------------------------------------------------------------+ +| Task :resets all the registers | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI2016_Reset(comedi_device * dev) +{ + outw(0x0, devpriv->iobase + APCI2016_DIGITAL_OP); // Resets the digital output channels + outw(0x0, devpriv->i_IobaseAddon + APCI2016_WATCHDOG_ENABLEDISABLE); + outw(0x0, devpriv->i_IobaseAddon + APCI2016_WATCHDOG_RELOAD_VALUE); + outw(0x0, devpriv->i_IobaseAddon + APCI2016_WATCHDOG_RELOAD_VALUE + 2); + return 0; +} --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.h @@ -0,0 +1,77 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/********* Definitions for APCI-2016 card *****/ + +#define APCI2016_BOARD_VENDOR_ID 0x15B8 +#define APCI2016_ADDRESS_RANGE 8 + +//DIGITAL INPUT-OUTPUT DEFINE + +#define APCI2016_DIGITAL_OP 0x04 +#define APCI2016_DIGITAL_OP_RW 4 + +//ADDIDATA Enable Disable + +#define ADDIDATA_ENABLE 1 +#define ADDIDATA_DISABLE 0 + +// TIMER COUNTER WATCHDOG DEFINES + +#define ADDIDATA_WATCHDOG 2 +#define APCI2016_DIGITAL_OP_WATCHDOG 0 +#define APCI2016_WATCHDOG_ENABLEDISABLE 12 +#define APCI2016_WATCHDOG_RELOAD_VALUE 4 +#define APCI2016_WATCHDOG_STATUS 16 + +// Hardware Layer functions for Apci2016 + +//DO +int i_APCI2016_ConfigDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +int i_APCI2016_WriteDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +int i_APCI2016_BitsDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +// TIMER +// timer value is passed as u seconds + +int i_APCI2016_ConfigWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +int i_APCI2016_StartStopWriteWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +int i_APCI2016_ReadWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +// Interrupt functions..... + +// VOID v_APCI2016_Interrupt(int irq, void *d) ; + + //VOID v_APCI2016_Interrupt(int irq, void *d); +// RESET +INT i_APCI2016_Reset(comedi_device * dev); --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c @@ -0,0 +1,579 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-------------------------------+---------------------------------------+ + | Project : APCI-2032 | Compiler : GCC | + | Module name : hwdrv_apci2032.c| Version : 2.96 | + +-------------------------------+---------------------------------------+ + | Project manager: Eric Stolz | Date : 02/12/2002 | + +-------------------------------+---------------------------------------+ + | Description : Hardware Layer Acces For APCI-2032 | + +-----------------------------------------------------------------------+ + | UPDATES | + +----------+-----------+------------------------------------------------+ + | Date | Author | Description of updates | + +----------+-----------+------------------------------------------------+ + | | | | + | | | | + | | | | + +----------+-----------+------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Included files | ++----------------------------------------------------------------------------+ +*/ + +#include "hwdrv_apci2032.h" +UINT ui_InterruptData, ui_Type; +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI2032_ConfigDigitalOutput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Configures The Digital Output Subdevice. | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT *data : Data Pointer contains | +| configuration parameters as below | +| | +| data[1] : 1 Enable VCC Interrupt | +| 0 Disable VCC Interrupt | +| data[2] : 1 Enable CC Interrupt | +| 0 Disable CC Interrupt | +| | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +int i_APCI2032_ConfigDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + ULONG ul_Command = 0; + devpriv->tsk_Current = current; + + if ((data[0] != 0) && (data[0] != 1)) { + comedi_error(dev, + "Not a valid Data !!! ,Data should be 1 or 0\n"); + return -EINVAL; + } //if ( (data[0]!=0) && (data[0]!=1) ) + if (data[0]) { + devpriv->b_OutputMemoryStatus = ADDIDATA_ENABLE; + } // if (data[0]) + else { + devpriv->b_OutputMemoryStatus = ADDIDATA_DISABLE; + } //else if (data[0]) + + if (data[1] == ADDIDATA_ENABLE) { + ul_Command = ul_Command | 0x1; + } //if (data[1] == ADDIDATA_ENABLE) + else { + ul_Command = ul_Command & 0xFFFFFFFE; + } //elseif (data[1] == ADDIDATA_ENABLE) + if (data[2] == ADDIDATA_ENABLE) { + ul_Command = ul_Command | 0x2; + } //if (data[2] == ADDIDATA_ENABLE) + else { + ul_Command = ul_Command & 0xFFFFFFFD; + } //elseif (data[2] == ADDIDATA_ENABLE) + outl(ul_Command, devpriv->iobase + APCI2032_DIGITAL_OP_INTERRUPT); + ui_InterruptData = inl(devpriv->iobase + APCI2032_DIGITAL_OP_INTERRUPT); + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI2032_WriteDigitalOutput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Writes port value To the selected port | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT ui_NoOfChannels : No Of Channels To Write | +| UINT *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI2032_WriteDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_Temp, ui_Temp1; + UINT ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel + if (devpriv->b_OutputMemoryStatus) { + ui_Temp = inl(devpriv->iobase + APCI2032_DIGITAL_OP); + + } //if(devpriv->b_OutputMemoryStatus ) + else { + ui_Temp = 0; + } //if(devpriv->b_OutputMemoryStatus ) + if (data[3] == 0) { + if (data[1] == 0) { + data[0] = (data[0] << ui_NoOfChannel) | ui_Temp; + outl(data[0], devpriv->iobase + APCI2032_DIGITAL_OP); + } //if(data[1]==0) + else { + if (data[1] == 1) { + switch (ui_NoOfChannel) { + + case 2: + data[0] = + (data[0] << (2 * + data[2])) | ui_Temp; + break; + + case 4: + data[0] = + (data[0] << (4 * + data[2])) | ui_Temp; + break; + + case 8: + data[0] = + (data[0] << (8 * + data[2])) | ui_Temp; + break; + + case 16: + data[0] = + (data[0] << (16 * + data[2])) | ui_Temp; + break; + case 31: + data[0] = data[0] | ui_Temp; + break; + + default: + comedi_error(dev, " chan spec wrong"); + return -EINVAL; // "sorry channel spec wrong " + + } //switch(ui_NoOfChannels) + + outl(data[0], + devpriv->iobase + APCI2032_DIGITAL_OP); + } // if(data[1]==1) + else { + printk("\nSpecified channel not supported\n"); + } //else if(data[1]==1) + } //elseif(data[1]==0) + } //if(data[3]==0) + else { + if (data[3] == 1) { + if (data[1] == 0) { + data[0] = ~data[0] & 0x1; + ui_Temp1 = 1; + ui_Temp1 = ui_Temp1 << ui_NoOfChannel; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = + (data[0] << ui_NoOfChannel) ^ + 0xffffffff; + data[0] = data[0] & ui_Temp; + outl(data[0], + devpriv->iobase + APCI2032_DIGITAL_OP); + } //if(data[1]==0) + else { + if (data[1] == 1) { + switch (ui_NoOfChannel) { + + case 2: + data[0] = ~data[0] & 0x3; + ui_Temp1 = 3; + ui_Temp1 = + ui_Temp1 << 2 * data[2]; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = + ((data[0] << (2 * + data + [2])) ^ + 0xffffffff) & ui_Temp; + break; + + case 4: + data[0] = ~data[0] & 0xf; + ui_Temp1 = 15; + ui_Temp1 = + ui_Temp1 << 4 * data[2]; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = + ((data[0] << (4 * + data + [2])) ^ + 0xffffffff) & ui_Temp; + break; + + case 8: + data[0] = ~data[0] & 0xff; + ui_Temp1 = 255; + ui_Temp1 = + ui_Temp1 << 8 * data[2]; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = + ((data[0] << (8 * + data + [2])) ^ + 0xffffffff) & ui_Temp; + break; + + case 16: + data[0] = ~data[0] & 0xffff; + ui_Temp1 = 65535; + ui_Temp1 = + ui_Temp1 << 16 * + data[2]; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = + ((data[0] << (16 * + data + [2])) ^ + 0xffffffff) & ui_Temp; + break; + + case 31: + break; + default: + comedi_error(dev, + " chan spec wrong"); + return -EINVAL; // "sorry channel spec wrong " + + } //switch(ui_NoOfChannels) + + outl(data[0], + devpriv->iobase + + APCI2032_DIGITAL_OP); + } // if(data[1]==1) + else { + printk("\nSpecified channel not supported\n"); + } //else if(data[1]==1) + } //elseif(data[1]==0) + } //if(data[3]==1); + else { + printk("\nSpecified functionality does not exist\n"); + return -EINVAL; + } //if else data[3]==1) + } //if else data[3]==0) + return (insn->n);; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI2032_ReadDigitalOutput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Read value of the selected channel or port | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT ui_NoOfChannels : No Of Channels To read | +| UINT *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI2032_ReadDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_Temp; + UINT ui_NoOfChannel; + ui_NoOfChannel = CR_CHAN(insn->chanspec); + ui_Temp = data[0]; + *data = inl(devpriv->iobase + APCI2032_DIGITAL_OP_RW); + if (ui_Temp == 0) { + *data = (*data >> ui_NoOfChannel) & 0x1; + } //if (ui_Temp==0) + else { + if (ui_Temp == 1) { + switch (ui_NoOfChannel) { + + case 2: + *data = (*data >> (2 * data[1])) & 3; + break; + + case 4: + *data = (*data >> (4 * data[1])) & 15; + break; + + case 8: + *data = (*data >> (8 * data[1])) & 255; + break; + + case 16: + *data = (*data >> (16 * data[1])) & 65535; + break; + + case 31: + break; + + default: + comedi_error(dev, " chan spec wrong"); + return -EINVAL; // "sorry channel spec wrong " + + } //switch(ui_NoOfChannels) + } //if (ui_Temp==1) + else { + printk("\nSpecified channel not supported \n"); + } //elseif (ui_Temp==1) + } + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : INT i_APCI2032_ConfigWatchdog(comedi_device + *dev,comedi_subdevice *s,comedi_insn *insn,lsampl_t *data)| +| | ++----------------------------------------------------------------------------+ +| Task : Configures The Watchdog | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| comedi_subdevice *s, :pointer to subdevice structure + comedi_insn *insn :pointer to insn structure | +| lsampl_t *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI2032_ConfigWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + if (data[0] == 0) { + //Disable the watchdog + outl(0x0, + devpriv->iobase + APCI2032_DIGITAL_OP_WATCHDOG + + APCI2032_TCW_PROG); + //Loading the Reload value + outl(data[1], + devpriv->iobase + APCI2032_DIGITAL_OP_WATCHDOG + + APCI2032_TCW_RELOAD_VALUE); + } else { + printk("\nThe input parameters are wrong\n"); + return -EINVAL; + } + + return insn->n; +} + + /* + +----------------------------------------------------------------------------+ + | Function Name : int i_APCI2032_StartStopWriteWatchdog | + | (comedi_device *dev,comedi_subdevice *s, + comedi_insn *insn,lsampl_t *data); | + +----------------------------------------------------------------------------+ + | Task : Start / Stop The Watchdog | + +----------------------------------------------------------------------------+ + | Input Parameters : comedi_device *dev : Driver handle | + | comedi_subdevice *s, :pointer to subdevice structure + comedi_insn *insn :pointer to insn structure | + | lsampl_t *data : Data Pointer to read status | + +----------------------------------------------------------------------------+ + | Output Parameters : -- | + +----------------------------------------------------------------------------+ + | Return Value : TRUE : No error occur | + | : FALSE : Error occur. Return the error | + | | + +----------------------------------------------------------------------------+ + */ + +int i_APCI2032_StartStopWriteWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + switch (data[0]) { + case 0: //stop the watchdog + outl(0x0, devpriv->iobase + APCI2032_DIGITAL_OP_WATCHDOG + APCI2032_TCW_PROG); //disable the watchdog + break; + case 1: //start the watchdog + outl(0x0001, + devpriv->iobase + APCI2032_DIGITAL_OP_WATCHDOG + + APCI2032_TCW_PROG); + break; + case 2: //Software trigger + outl(0x0201, + devpriv->iobase + APCI2032_DIGITAL_OP_WATCHDOG + + APCI2032_TCW_PROG); + break; + default: + printk("\nSpecified functionality does not exist\n"); + return -EINVAL; + } + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI2032_ReadWatchdog | +| (comedi_device *dev,comedi_subdevice *s,comedi_insn *insn, + lsampl_t *data); | ++----------------------------------------------------------------------------+ +| Task : Read The Watchdog | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| comedi_subdevice *s, :pointer to subdevice structure + comedi_insn *insn :pointer to insn structure | +| lsampl_t *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI2032_ReadWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + + data[0] = + inl(devpriv->iobase + APCI2032_DIGITAL_OP_WATCHDOG + + APCI2032_TCW_TRIG_STATUS) & 0x1; + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : void v_APCI2032_Interrupt | +| (int irq , void *d) | ++----------------------------------------------------------------------------+ +| Task : Writes port value To the selected port | ++----------------------------------------------------------------------------+ +| Input Parameters : int irq : irq number | +| void *d : void pointer | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +void v_APCI2032_Interrupt(int irq, void *d) +{ + comedi_device *dev = d; + unsigned int ui_DO; + + ui_DO = inl(devpriv->iobase + APCI2032_DIGITAL_OP_IRQ) & 0x1; //Check if VCC OR CC interrupt has occured. + + if (ui_DO == 0) { + printk("\nInterrupt from unKnown source\n"); + } // if(ui_DO==0) + if (ui_DO) { + // Check for Digital Output interrupt Type - 1: Vcc interrupt 2: CC interrupt. + ui_Type = + inl(devpriv->iobase + + APCI2032_DIGITAL_OP_INTERRUPT_STATUS) & 0x3; + outl(0x0, + devpriv->iobase + APCI2032_DIGITAL_OP + + APCI2032_DIGITAL_OP_INTERRUPT); + if (ui_Type == 1) { + //Sends signal to user space + send_sig(SIGIO, devpriv->tsk_Current, 0); + } // if (ui_Type==1) + else { + if (ui_Type == 2) { + // Sends signal to user space + send_sig(SIGIO, devpriv->tsk_Current, 0); + } //if (ui_Type==2) + } //else if (ui_Type==1) + } //if(ui_DO) + + return; + +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI2032_ReadInterruptStatus | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task :Reads the interrupt status register | ++----------------------------------------------------------------------------+ +| Input Parameters : | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI2032_ReadInterruptStatus(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + *data = ui_Type; + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI2032_Reset(comedi_device *dev) | +| | ++----------------------------------------------------------------------------+ +| Task :Resets the registers of the card | ++----------------------------------------------------------------------------+ +| Input Parameters : | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI2032_Reset(comedi_device * dev) +{ + devpriv->b_DigitalOutputRegister = 0; + ui_Type = 0; + outl(0x0, devpriv->iobase + APCI2032_DIGITAL_OP); //Resets the output channels + outl(0x0, devpriv->iobase + APCI2032_DIGITAL_OP_INTERRUPT); //Disables the interrupt. + outl(0x0, devpriv->iobase + APCI2032_DIGITAL_OP_WATCHDOG + APCI2032_TCW_PROG); //disable the watchdog + outl(0x0, devpriv->iobase + APCI2032_DIGITAL_OP_WATCHDOG + APCI2032_TCW_RELOAD_VALUE); //reload=0 + return 0; +} --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.h @@ -0,0 +1,87 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/********* Definitions for APCI-2032 card *****/ + +// Card Specific information +#define APCI2032_BOARD_VENDOR_ID 0x15B8 +#define APCI2032_ADDRESS_RANGE 63 + +//DIGITAL INPUT-OUTPUT DEFINE + +#define APCI2032_DIGITAL_OP 0 +#define APCI2032_DIGITAL_OP_RW 0 +#define APCI2032_DIGITAL_OP_INTERRUPT 4 +#define APCI2032_DIGITAL_OP_IRQ 12 + +//Digital Output Interrupt Status +#define APCI2032_DIGITAL_OP_INTERRUPT_STATUS 8 + +//Digital Output Interrupt Enable Disable. +#define APCI2032_DIGITAL_OP_VCC_INTERRUPT_ENABLE 0x1 +#define APCI2032_DIGITAL_OP_VCC_INTERRUPT_DISABLE 0xFFFFFFFE +#define APCI2032_DIGITAL_OP_CC_INTERRUPT_ENABLE 0x2 +#define APCI2032_DIGITAL_OP_CC_INTERRUPT_DISABLE 0xFFFFFFFD + +//ADDIDATA Enable Disable + +#define ADDIDATA_ENABLE 1 +#define ADDIDATA_DISABLE 0 + +// TIMER COUNTER WATCHDOG DEFINES + +#define ADDIDATA_WATCHDOG 2 +#define APCI2032_DIGITAL_OP_WATCHDOG 16 +#define APCI2032_TCW_RELOAD_VALUE 4 +#define APCI2032_TCW_TIMEBASE 8 +#define APCI2032_TCW_PROG 12 +#define APCI2032_TCW_TRIG_STATUS 16 +#define APCI2032_TCW_IRQ 20 + +// Hardware Layer functions for Apci2032 + +//DO +int i_APCI2032_ConfigDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +INT i_APCI2032_WriteDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +INT i_APCI2032_ReadDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +int i_APCI2032_ReadInterruptStatus(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +// TIMER +// timer value is passed as u seconds +INT i_APCI2032_ConfigWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +int i_APCI2032_StartStopWriteWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +int i_APCI2032_ReadWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +// Interrupt functions..... + +void v_APCI2032_Interrupt(int irq, void *d); + +//Reset functions +int i_APCI2032_Reset(comedi_device * dev); --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.c @@ -0,0 +1,549 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-------------------------------+---------------------------------------+ + | Project : APCI-2200 | Compiler : GCC | + | Module name : hwdrv_apci2200.c| Version : 2.96 | + +-------------------------------+---------------------------------------+ + | Project manager: Eric Stolz | Date : 02/12/2002 | + +-------------------------------+---------------------------------------+ + | Description : Hardware Layer Acces For APCI-2200 | + +-----------------------------------------------------------------------+ + | UPDATES | + +----------+-----------+------------------------------------------------+ + | Date | Author | Description of updates | + +----------+-----------+------------------------------------------------+ + | | | | + | | | | + | | | | + +----------+-----------+------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Included files | ++----------------------------------------------------------------------------+ +*/ +#include "hwdrv_apci2200.h" + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI2200_Read1DigitalInput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Return the status of the digital input | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| comedi_subdevice *s, :pointer to subdevice structure + comedi_insn *insn :pointer to insn structure | +| lsampl_t *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI2200_Read1DigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_TmpValue = 0; + UINT ui_Channel; + ui_Channel = CR_CHAN(insn->chanspec); + if (ui_Channel >= 0 && ui_Channel <= 7) { + ui_TmpValue = (UINT) inw(devpriv->iobase + APCI2200_DIGITAL_IP); + *data = (ui_TmpValue >> ui_Channel) & 0x1; + } //if(ui_Channel >= 0 && ui_Channel <=7) + else { + printk("\nThe specified channel does not exist\n"); + return -EINVAL; // "sorry channel spec wrong " + } //else if(ui_Channel >= 0 && ui_Channel <=7) + + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI2200_ReadMoreDigitalInput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Return the status of the Requested digital inputs | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| comedi_subdevice *s, :pointer to subdevice structure + comedi_insn *insn :pointer to insn structure | +| lsampl_t *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI2200_ReadMoreDigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + + UINT ui_PortValue = data[0]; + UINT ui_Mask = 0; + UINT ui_NoOfChannels; + + ui_NoOfChannels = CR_CHAN(insn->chanspec); + + *data = (UINT) inw(devpriv->iobase + APCI2200_DIGITAL_IP); + switch (ui_NoOfChannels) { + case 2: + ui_Mask = 3; + *data = (*data >> (2 * ui_PortValue)) & ui_Mask; + break; + case 4: + ui_Mask = 15; + *data = (*data >> (4 * ui_PortValue)) & ui_Mask; + break; + case 7: + break; + + default: + printk("\nWrong parameters\n"); + return -EINVAL; // "sorry channel spec wrong " + break; + } //switch(ui_NoOfChannels) + + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI2200_ConfigDigitalOutput (comedi_device *dev, + comedi_subdevice *s comedi_insn *insn,lsampl_t *data) | +| | ++----------------------------------------------------------------------------+ +| Task : Configures The Digital Output Subdevice. | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| lsampl_t *data : Data Pointer contains | +| configuration parameters as below | +| comedi_subdevice *s, :pointer to subdevice structure + comedi_insn *insn :pointer to insn structure | +| data[0] :1:Memory on | +| 0:Memory off | +| | +| | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +int i_APCI2200_ConfigDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + devpriv->b_OutputMemoryStatus = data[0]; + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI2200_WriteDigitalOutput | +| (comedi_device *dev,comedi_subdevice *s,comedi_insn *insn, + lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Writes port value To the selected port | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| comedi_subdevice *s, :pointer to subdevice structure + comedi_insn *insn :pointer to insn structure | +| lsampl_t *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI2200_WriteDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_Temp, ui_Temp1; + UINT ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel + if (devpriv->b_OutputMemoryStatus) { + ui_Temp = inw(devpriv->iobase + APCI2200_DIGITAL_OP); + + } //if(devpriv->b_OutputMemoryStatus ) + else { + ui_Temp = 0; + } //if(devpriv->b_OutputMemoryStatus ) + if (data[3] == 0) { + if (data[1] == 0) { + data[0] = (data[0] << ui_NoOfChannel) | ui_Temp; + outw(data[0], devpriv->iobase + APCI2200_DIGITAL_OP); + } //if(data[1]==0) + else { + if (data[1] == 1) { + switch (ui_NoOfChannel) { + + case 2: + data[0] = + (data[0] << (2 * + data[2])) | ui_Temp; + break; + + case 4: + data[0] = + (data[0] << (4 * + data[2])) | ui_Temp; + break; + + case 8: + data[0] = + (data[0] << (8 * + data[2])) | ui_Temp; + break; + case 15: + data[0] = data[0] | ui_Temp; + break; + default: + comedi_error(dev, " chan spec wrong"); + return -EINVAL; // "sorry channel spec wrong " + + } //switch(ui_NoOfChannels) + + outw(data[0], + devpriv->iobase + APCI2200_DIGITAL_OP); + } // if(data[1]==1) + else { + printk("\nSpecified channel not supported\n"); + } //else if(data[1]==1) + } //elseif(data[1]==0) + } //if(data[3]==0) + else { + if (data[3] == 1) { + if (data[1] == 0) { + data[0] = ~data[0] & 0x1; + ui_Temp1 = 1; + ui_Temp1 = ui_Temp1 << ui_NoOfChannel; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = (data[0] << ui_NoOfChannel) ^ 0xffff; + data[0] = data[0] & ui_Temp; + outw(data[0], + devpriv->iobase + APCI2200_DIGITAL_OP); + } //if(data[1]==0) + else { + if (data[1] == 1) { + switch (ui_NoOfChannel) { + + case 2: + data[0] = ~data[0] & 0x3; + ui_Temp1 = 3; + ui_Temp1 = + ui_Temp1 << 2 * data[2]; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = + ((data[0] << (2 * + data + [2])) ^ + 0xffff) & ui_Temp; + break; + + case 4: + data[0] = ~data[0] & 0xf; + ui_Temp1 = 15; + ui_Temp1 = + ui_Temp1 << 4 * data[2]; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = + ((data[0] << (4 * + data + [2])) ^ + 0xffff) & ui_Temp; + break; + + case 8: + data[0] = ~data[0] & 0xff; + ui_Temp1 = 255; + ui_Temp1 = + ui_Temp1 << 8 * data[2]; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = + ((data[0] << (8 * + data + [2])) ^ + 0xffff) & ui_Temp; + break; + case 15: + break; + + default: + comedi_error(dev, + " chan spec wrong"); + return -EINVAL; // "sorry channel spec wrong " + + } //switch(ui_NoOfChannels) + + outw(data[0], + devpriv->iobase + + APCI2200_DIGITAL_OP); + } // if(data[1]==1) + else { + printk("\nSpecified channel not supported\n"); + } //else if(data[1]==1) + } //elseif(data[1]==0) + } //if(data[3]==1); + else { + printk("\nSpecified functionality does not exist\n"); + return -EINVAL; + } //if else data[3]==1) + } //if else data[3]==0) + return (insn->n);; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI2200_ReadDigitalOutput | +| (comedi_device *dev,comedi_subdevice *s,comedi_insn *insn, + lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Read value of the selected channel or port | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| comedi_subdevice *s, :pointer to subdevice structure + comedi_insn *insn :pointer to insn structure | +| lsampl_t *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI2200_ReadDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + + UINT ui_Temp; + UINT ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel + ui_Temp = data[0]; + *data = inw(devpriv->iobase + APCI2200_DIGITAL_OP); + if (ui_Temp == 0) { + *data = (*data >> ui_NoOfChannel) & 0x1; + } //if(ui_Temp==0) + else { + if (ui_Temp == 1) { + switch (ui_NoOfChannel) { + + case 2: + *data = (*data >> (2 * data[1])) & 3; + break; + + case 4: + *data = (*data >> (4 * data[1])) & 15; + break; + + case 8: + *data = (*data >> (8 * data[1])) & 255; + break; + + case 15: + break; + + default: + comedi_error(dev, " chan spec wrong"); + return -EINVAL; // "sorry channel spec wrong " + + } //switch(ui_NoOfChannels) + } //if(ui_Temp==1) + else { + printk("\nSpecified channel not supported \n"); + } //elseif(ui_Temp==1) + } //elseif(ui_Temp==0) + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI2200_ConfigWatchdog(comedi_device *dev, + comedi_subdevice *s,comedi_insn *insn,lsampl_t *data) | +| | ++----------------------------------------------------------------------------+ +| Task : Configures The Watchdog | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| comedi_subdevice *s, :pointer to subdevice structure + comedi_insn *insn :pointer to insn structure | +| lsampl_t *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI2200_ConfigWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + if (data[0] == 0) { + //Disable the watchdog + outw(0x0, + devpriv->iobase + APCI2200_WATCHDOG + + APCI2200_WATCHDOG_ENABLEDISABLE); + //Loading the Reload value + outw(data[1], + devpriv->iobase + APCI2200_WATCHDOG + + APCI2200_WATCHDOG_RELOAD_VALUE); + data[1] = data[1] >> 16; + outw(data[1], + devpriv->iobase + APCI2200_WATCHDOG + + APCI2200_WATCHDOG_RELOAD_VALUE + 2); + } //if(data[0]==0) + else { + printk("\nThe input parameters are wrong\n"); + return -EINVAL; + } //elseif(data[0]==0) + + return insn->n; +} + + /* + +----------------------------------------------------------------------------+ + | Function Name : int i_APCI2200_StartStopWriteWatchdog | + | (comedi_device *dev,comedi_subdevice *s, + comedi_insn *insn,lsampl_t *data); | + +----------------------------------------------------------------------------+ + | Task : Start / Stop The Watchdog | + +----------------------------------------------------------------------------+ + | Input Parameters : comedi_device *dev : Driver handle | + | comedi_subdevice *s, :pointer to subdevice structure + comedi_insn *insn :pointer to insn structure | + | lsampl_t *data : Data Pointer to read status | + +----------------------------------------------------------------------------+ + | Output Parameters : -- | + +----------------------------------------------------------------------------+ + | Return Value : TRUE : No error occur | + | : FALSE : Error occur. Return the error | + | | + +----------------------------------------------------------------------------+ + */ + +int i_APCI2200_StartStopWriteWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + switch (data[0]) { + case 0: //stop the watchdog + outw(0x0, devpriv->iobase + APCI2200_WATCHDOG + APCI2200_WATCHDOG_ENABLEDISABLE); //disable the watchdog + break; + case 1: //start the watchdog + outw(0x0001, + devpriv->iobase + APCI2200_WATCHDOG + + APCI2200_WATCHDOG_ENABLEDISABLE); + break; + case 2: //Software trigger + outw(0x0201, + devpriv->iobase + APCI2200_WATCHDOG + + APCI2200_WATCHDOG_ENABLEDISABLE); + break; + default: + printk("\nSpecified functionality does not exist\n"); + return -EINVAL; + } // switch(data[0]) + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI2200_ReadWatchdog | +| (comedi_device *dev,comedi_subdevice *s,comedi_insn *insn, + lsampl_t *data); | ++----------------------------------------------------------------------------+ +| Task : Read The Watchdog | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| comedi_subdevice *s, :pointer to subdevice structure + comedi_insn *insn :pointer to insn structure | +| lsampl_t *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI2200_ReadWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + data[0] = + inw(devpriv->iobase + APCI2200_WATCHDOG + + APCI2200_WATCHDOG_STATUS) & 0x1; + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI2200_Reset(comedi_device *dev) | | ++----------------------------------------------------------------------------+ +| Task :resets all the registers | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI2200_Reset(comedi_device * dev) +{ + outw(0x0, devpriv->iobase + APCI2200_DIGITAL_OP); //RESETS THE DIGITAL OUTPUTS + outw(0x0, + devpriv->iobase + APCI2200_WATCHDOG + + APCI2200_WATCHDOG_ENABLEDISABLE); + outw(0x0, + devpriv->iobase + APCI2200_WATCHDOG + + APCI2200_WATCHDOG_RELOAD_VALUE); + outw(0x0, + devpriv->iobase + APCI2200_WATCHDOG + + APCI2200_WATCHDOG_RELOAD_VALUE + 2); + return 0; +} --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.h @@ -0,0 +1,67 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/********* Definitions for APCI-2200 card *****/ + +// Card Specific information +#define APCI2200_BOARD_VENDOR_ID 0x15b8 +#define APCI2200_ADDRESS_RANGE 64 + +//DIGITAL INPUT-OUTPUT DEFINE + +#define APCI2200_DIGITAL_OP 4 +#define APCI2200_DIGITAL_IP 0 + +// TIMER COUNTER WATCHDOG DEFINES + +#define APCI2200_WATCHDOG 0x08 +#define APCI2200_WATCHDOG_ENABLEDISABLE 12 +#define APCI2200_WATCHDOG_RELOAD_VALUE 4 +#define APCI2200_WATCHDOG_STATUS 16 + +// Hardware Layer functions for Apci2200 + +//Digital Input +INT i_APCI2200_ReadMoreDigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +INT i_APCI2200_Read1DigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +//Digital Output +int i_APCI2200_ConfigDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +INT i_APCI2200_WriteDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +INT i_APCI2200_ReadDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +// TIMER +int i_APCI2200_ConfigWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +int i_APCI2200_StartStopWriteWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +int i_APCI2200_ReadWatchdog(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +//reset +INT i_APCI2200_Reset(comedi_device * dev); --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c @@ -0,0 +1,2688 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstrasse 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-----------------------------------------------------------------------+ + | Project : APCI-3120 | Compiler : GCC | + | Module name : hwdrv_apci3120.c| Version : 2.96 | + +-------------------------------+---------------------------------------+ + | Project manager: Eric Stolz | Date : 02/12/2002 | + +-----------------------------------------------------------------------+ + | Description :APCI3120 Module. Hardware abstraction Layer for APCI3120| + +-----------------------------------------------------------------------+ + | UPDATE'S | + +-----------------------------------------------------------------------+ + | Date | Author | Description of updates | + +----------+-----------+------------------------------------------------+ + | | | | + | | | | + +----------+-----------+------------------------------------------------+ +*/ + +#include "hwdrv_apci3120.h" +static UINT ui_Temp = 0; + +// FUNCTION DEFINITIONS + +/* ++----------------------------------------------------------------------------+ +| ANALOG INPUT SUBDEVICE | ++----------------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Function name :int i_APCI3120_InsnConfigAnalogInput(comedi_device *dev,| +| comedi_subdevice *s,comedi_insn *insn,lsampl_t *data) | +| | ++----------------------------------------------------------------------------+ +| Task : Calls card specific function | +| | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev | +| comedi_subdevice *s | +| comedi_insn *insn | +| lsampl_t *data | ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3120_InsnConfigAnalogInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT i; + + if ((data[0] != APCI3120_EOC_MODE) && (data[0] != APCI3120_EOS_MODE)) + return -1; + + // Check for Conversion time to be added ?? + devpriv->ui_EocEosConversionTime = data[2]; + + if (data[0] == APCI3120_EOS_MODE) { + + //Test the number of the channel + for (i = 0; i < data[3]; i++) { + + if (CR_CHAN(data[4 + i]) >= this_board->i_NbrAiChannel) { + printk("bad channel list\n"); + return -2; + } + } + + devpriv->b_InterruptMode = APCI3120_EOS_MODE; + + if (data[1]) { + devpriv->b_EocEosInterrupt = APCI3120_ENABLE; + } else + devpriv->b_EocEosInterrupt = APCI3120_DISABLE; + // Copy channel list and Range List to devpriv + + devpriv->ui_AiNbrofChannels = data[3]; + for (i = 0; i < devpriv->ui_AiNbrofChannels; i++) { + devpriv->ui_AiChannelList[i] = data[4 + i]; + } + + } else // EOC + { + devpriv->b_InterruptMode = APCI3120_EOC_MODE; + if (data[1]) { + devpriv->b_EocEosInterrupt = APCI3120_ENABLE; + } else { + devpriv->b_EocEosInterrupt = APCI3120_DISABLE; + } + } + + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function name :int i_APCI3120_InsnReadAnalogInput(comedi_device *dev, | +| comedi_subdevice *s,comedi_insn *insn, lsampl_t *data) | +| | ++----------------------------------------------------------------------------+ +| Task : card specific function | +| Reads analog input in synchronous mode | +| EOC and EOS is selected as per configured | +| if no conversion time is set uses default conversion | +| time 10 microsec. | +| | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev | +| comedi_subdevice *s | +| comedi_insn *insn | +| lsampl_t *data | ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3120_InsnReadAnalogInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + USHORT us_ConvertTiming, us_TmpValue, i; + BYTE b_Tmp; + + // fix convertion time to 10 us + if (!devpriv->ui_EocEosConversionTime) { + printk("No timer0 Value using 10 us\n"); + us_ConvertTiming = 10; + } else + us_ConvertTiming = (USHORT) (devpriv->ui_EocEosConversionTime / 1000); // nano to useconds + + // this_board->i_hwdrv_InsnReadAnalogInput(dev,us_ConvertTiming,insn->n,&insn->chanspec,data,insn->unused[0]); + + // Clear software registers + devpriv->b_TimerSelectMode = 0; + devpriv->b_ModeSelectRegister = 0; + devpriv->us_OutputRegister = 0; +// devpriv->b_DigitalOutputRegister=0; + + if (insn->unused[0] == 222) // second insn read + { + + for (i = 0; i < insn->n; i++) { + data[i] = devpriv->ui_AiReadData[i]; + } + + } else { + devpriv->tsk_Current = current; // Save the current process task structure + //Testing if board have the new Quartz and calculate the time value + //to set in the timer + + us_TmpValue = + (USHORT) inw(devpriv->iobase + APCI3120_RD_STATUS); + + //EL250804: Testing if board APCI3120 have the new Quartz or if it is an APCI3001 + if ((us_TmpValue & 0x00B0) == 0x00B0 + || !strcmp(this_board->pc_DriverName, "apci3001")) { + us_ConvertTiming = (us_ConvertTiming * 2) - 2; + } else { + us_ConvertTiming = + ((us_ConvertTiming * 12926) / 10000) - 1; + } + + us_TmpValue = (USHORT) devpriv->b_InterruptMode; + + switch (us_TmpValue) { + + case APCI3120_EOC_MODE: + + // Testing the interrupt flag and set the EOC bit + // Clears the FIFO + inw(devpriv->iobase + APCI3120_RESET_FIFO); + + // Initialize the sequence array + + //if (!i_APCI3120_SetupChannelList(dev,s,1,chanlist,0)) return -EINVAL; + + if (!i_APCI3120_SetupChannelList(dev, s, 1, + &insn->chanspec, 0)) + return -EINVAL; + + //Initialize Timer 0 mode 4 + devpriv->b_TimerSelectMode = + (devpriv-> + b_TimerSelectMode & 0xFC) | + APCI3120_TIMER_0_MODE_4; + outb(devpriv->b_TimerSelectMode, + devpriv->iobase + APCI3120_TIMER_CRT1); + + // Reset the scan bit and Disables the EOS, DMA, EOC interrupt + devpriv->b_ModeSelectRegister = + devpriv-> + b_ModeSelectRegister & APCI3120_DISABLE_SCAN; + + if (devpriv->b_EocEosInterrupt == APCI3120_ENABLE) { + + //Disables the EOS,DMA and enables the EOC interrupt + devpriv->b_ModeSelectRegister = + (devpriv-> + b_ModeSelectRegister & + APCI3120_DISABLE_EOS_INT) | + APCI3120_ENABLE_EOC_INT; + inw(devpriv->iobase); + + } else { + devpriv->b_ModeSelectRegister = + devpriv-> + b_ModeSelectRegister & + APCI3120_DISABLE_ALL_INTERRUPT_WITHOUT_TIMER; + } + + outb(devpriv->b_ModeSelectRegister, + devpriv->iobase + APCI3120_WRITE_MODE_SELECT); + + // Sets gate 0 + devpriv->us_OutputRegister = + (devpriv-> + us_OutputRegister & APCI3120_CLEAR_PA_PR) | + APCI3120_ENABLE_TIMER0; + outw(devpriv->us_OutputRegister, + devpriv->iobase + APCI3120_WR_ADDRESS); + + // Select Timer 0 + b_Tmp = ((devpriv-> + b_DigitalOutputRegister) & 0xF0) | + APCI3120_SELECT_TIMER_0_WORD; + outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0); + + //Set the convertion time + outw(us_ConvertTiming, + devpriv->iobase + APCI3120_TIMER_VALUE); + + us_TmpValue = + (USHORT) inw(dev->iobase + APCI3120_RD_STATUS); + + if (devpriv->b_EocEosInterrupt == APCI3120_DISABLE) { + + do { + // Waiting for the end of conversion + us_TmpValue = + inw(devpriv->iobase + + APCI3120_RD_STATUS); + } while ((us_TmpValue & APCI3120_EOC) == + APCI3120_EOC); + + //Read the result in FIFO and put it in insn data pointer + us_TmpValue = inw(devpriv->iobase + 0); + *data = us_TmpValue; + + inw(devpriv->iobase + APCI3120_RESET_FIFO); + } + + break; + + case APCI3120_EOS_MODE: + + inw(devpriv->iobase); + // Clears the FIFO + inw(devpriv->iobase + APCI3120_RESET_FIFO); + // clear PA PR and disable timer 0 + + devpriv->us_OutputRegister = + (devpriv-> + us_OutputRegister & APCI3120_CLEAR_PA_PR) | + APCI3120_DISABLE_TIMER0; + + outw(devpriv->us_OutputRegister, + devpriv->iobase + APCI3120_WR_ADDRESS); + + if (!i_APCI3120_SetupChannelList(dev, s, + devpriv->ui_AiNbrofChannels, + devpriv->ui_AiChannelList, 0)) + return -EINVAL; + + //Initialize Timer 0 mode 2 + devpriv->b_TimerSelectMode = + (devpriv-> + b_TimerSelectMode & 0xFC) | + APCI3120_TIMER_0_MODE_2; + outb(devpriv->b_TimerSelectMode, + devpriv->iobase + APCI3120_TIMER_CRT1); + + //Select Timer 0 + b_Tmp = ((devpriv-> + b_DigitalOutputRegister) & 0xF0) | + APCI3120_SELECT_TIMER_0_WORD; + outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0); + + //Set the convertion time + outw(us_ConvertTiming, + devpriv->iobase + APCI3120_TIMER_VALUE); + + //Set the scan bit + devpriv->b_ModeSelectRegister = + devpriv-> + b_ModeSelectRegister | APCI3120_ENABLE_SCAN; + outb(devpriv->b_ModeSelectRegister, + devpriv->iobase + APCI3120_WRITE_MODE_SELECT); + + //If Interrupt function is loaded + if (devpriv->b_EocEosInterrupt == APCI3120_ENABLE) { + //Disables the EOC,DMA and enables the EOS interrupt + devpriv->b_ModeSelectRegister = + (devpriv-> + b_ModeSelectRegister & + APCI3120_DISABLE_EOC_INT) | + APCI3120_ENABLE_EOS_INT; + inw(devpriv->iobase); + + } else + devpriv->b_ModeSelectRegister = + devpriv-> + b_ModeSelectRegister & + APCI3120_DISABLE_ALL_INTERRUPT_WITHOUT_TIMER; + + outb(devpriv->b_ModeSelectRegister, + devpriv->iobase + APCI3120_WRITE_MODE_SELECT); + + inw(devpriv->iobase + APCI3120_RD_STATUS); + + //Sets gate 0 + + devpriv->us_OutputRegister = + devpriv-> + us_OutputRegister | APCI3120_ENABLE_TIMER0; + outw(devpriv->us_OutputRegister, + devpriv->iobase + APCI3120_WR_ADDRESS); + + //Start conversion + outw(0, devpriv->iobase + APCI3120_START_CONVERSION); + + //Waiting of end of convertion if interrupt is not installed + if (devpriv->b_EocEosInterrupt == APCI3120_DISABLE) { + //Waiting the end of convertion + do { + us_TmpValue = + inw(devpriv->iobase + + APCI3120_RD_STATUS); + } + while ((us_TmpValue & APCI3120_EOS) != + APCI3120_EOS); + + for (i = 0; i < devpriv->ui_AiNbrofChannels; + i++) { + //Read the result in FIFO and write them in shared memory + us_TmpValue = inw(devpriv->iobase); + data[i] = (UINT) us_TmpValue; + } + + devpriv->b_InterruptMode = APCI3120_EOC_MODE; // Restore defaults. + } + break; + + default: + printk("inputs wrong\n"); + + } + devpriv->ui_EocEosConversionTime = 0; // re initializing the variable; + } + + return insn->n; + +} + +/* ++----------------------------------------------------------------------------+ +| Function name :int i_APCI3120_StopCyclicAcquisition(comedi_device *dev,| +| comedi_subdevice *s)| +| | ++----------------------------------------------------------------------------+ +| Task : Stops Cyclic acquisition | +| | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev | +| comedi_subdevice *s | +| | ++----------------------------------------------------------------------------+ +| Return Value :0 | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3120_StopCyclicAcquisition(comedi_device * dev, comedi_subdevice * s) +{ + // Disable A2P Fifo write and AMWEN signal + outw(0, devpriv->i_IobaseAddon + 4); + + //Disable Bus Master ADD ON + outw(APCI3120_ADD_ON_AGCSTS_LOW, devpriv->i_IobaseAddon + 0); + outw(0, devpriv->i_IobaseAddon + 2); + outw(APCI3120_ADD_ON_AGCSTS_HIGH, devpriv->i_IobaseAddon + 0); + outw(0, devpriv->i_IobaseAddon + 2); + + //Disable BUS Master PCI + outl(0, devpriv->i_IobaseAmcc + AMCC_OP_REG_MCSR); + + //outl(inl(devpriv->i_IobaseAmcc+AMCC_OP_REG_INTCSR)&(~AINT_WRITE_COMPL), devpriv->i_IobaseAmcc+AMCC_OP_REG_INTCSR); // stop amcc irqs + //outl(inl(devpriv->i_IobaseAmcc+AMCC_OP_REG_MCSR)&(~EN_A2P_TRANSFERS), devpriv->i_IobaseAmcc+AMCC_OP_REG_MCSR); // stop DMA + + //Disable ext trigger + i_APCI3120_ExttrigDisable(dev); + + devpriv->us_OutputRegister = 0; + //stop counters + outw(devpriv-> + us_OutputRegister & APCI3120_DISABLE_TIMER0 & + APCI3120_DISABLE_TIMER1, dev->iobase + APCI3120_WR_ADDRESS); + + outw(APCI3120_DISABLE_ALL_TIMER, dev->iobase + APCI3120_WR_ADDRESS); + + //DISABLE_ALL_INTERRUPT + outb(APCI3120_DISABLE_ALL_INTERRUPT, + dev->iobase + APCI3120_WRITE_MODE_SELECT); + //Flush FIFO + inb(dev->iobase + APCI3120_RESET_FIFO); + inw(dev->iobase + APCI3120_RD_STATUS); + devpriv->ui_AiActualScan = 0; + devpriv->ui_AiActualScanPosition = 0; + s->async->cur_chan = 0; + devpriv->ui_AiBufferPtr = 0; + devpriv->b_AiContinuous = 0; + devpriv->ui_DmaActualBuffer = 0; + + devpriv->b_AiCyclicAcquisition = APCI3120_DISABLE; + devpriv->b_InterruptMode = APCI3120_EOC_MODE; + devpriv->b_EocEosInterrupt = APCI3120_DISABLE; + i_APCI3120_Reset(dev); + return 0; +} + +/* ++----------------------------------------------------------------------------+ +| Function name :int i_APCI3120_CommandTestAnalogInput(comedi_device *dev| +| ,comedi_subdevice *s,comedi_cmd *cmd) | +| | ++----------------------------------------------------------------------------+ +| Task : Test validity for a command for cyclic anlog input | +| acquisition | +| | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev | +| comedi_subdevice *s | +| comedi_cmd *cmd | ++----------------------------------------------------------------------------+ +| Return Value :0 | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3120_CommandTestAnalogInput(comedi_device * dev, comedi_subdevice * s, + comedi_cmd * cmd) +{ + int err = 0; + int tmp; // divisor1,divisor2; + + // step 1: make sure trigger sources are trivially valid + + tmp = cmd->start_src; + cmd->start_src &= TRIG_NOW | TRIG_EXT; + if (!cmd->start_src || tmp != cmd->start_src) + err++; + + tmp = cmd->scan_begin_src; + cmd->scan_begin_src &= TRIG_TIMER | TRIG_FOLLOW; + if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src) + err++; + + tmp = cmd->convert_src; + cmd->convert_src &= TRIG_TIMER; + if (!cmd->convert_src || tmp != cmd->convert_src) + err++; + + tmp = cmd->scan_end_src; + cmd->scan_end_src &= TRIG_COUNT; + if (!cmd->scan_end_src || tmp != cmd->scan_end_src) + err++; + + tmp = cmd->stop_src; + cmd->stop_src &= TRIG_COUNT | TRIG_NONE; + if (!cmd->stop_src || tmp != cmd->stop_src) + err++; + + if (err) + return 1; + + //step 2: make sure trigger sources are unique and mutually compatible + + if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_EXT) { + err++; + } + + if (cmd->scan_begin_src != TRIG_TIMER && + cmd->scan_begin_src != TRIG_FOLLOW) + err++; + + if (cmd->convert_src != TRIG_TIMER) + err++; + + if (cmd->scan_end_src != TRIG_COUNT) { + cmd->scan_end_src = TRIG_COUNT; + err++; + } + + if (cmd->stop_src != TRIG_NONE && cmd->stop_src != TRIG_COUNT) + err++; + + if (err) + return 2; + + // step 3: make sure arguments are trivially compatible + + if (cmd->start_arg != 0) { + cmd->start_arg = 0; + err++; + } + + if (cmd->scan_begin_src == TRIG_TIMER) // Test Delay timing + { + if (cmd->scan_begin_arg < this_board->ui_MinDelaytimeNs) { + cmd->scan_begin_arg = this_board->ui_MinDelaytimeNs; + err++; + } + } + + if (cmd->convert_src == TRIG_TIMER) // Test Acquisition timing + { + if (cmd->scan_begin_src == TRIG_TIMER) { + if ((cmd->convert_arg) + && (cmd->convert_arg < + this_board->ui_MinAcquisitiontimeNs)) { + cmd->convert_arg = + this_board->ui_MinAcquisitiontimeNs; + err++; + } + } else { + if (cmd->convert_arg < + this_board->ui_MinAcquisitiontimeNs) { + cmd->convert_arg = + this_board->ui_MinAcquisitiontimeNs; + err++; + + } + } + } + + if (!cmd->chanlist_len) { + cmd->chanlist_len = 1; + err++; + } + if (cmd->chanlist_len > this_board->i_AiChannelList) { + cmd->chanlist_len = this_board->i_AiChannelList; + err++; + } + if (cmd->stop_src == TRIG_COUNT) { + if (!cmd->stop_arg) { + cmd->stop_arg = 1; + err++; + } + } else { // TRIG_NONE + if (cmd->stop_arg != 0) { + cmd->stop_arg = 0; + err++; + } + } + + if (err) + return 3; + + // step 4: fix up any arguments + + if (cmd->convert_src == TRIG_TIMER) { + + if (cmd->scan_begin_src == TRIG_TIMER && + cmd->scan_begin_arg < + cmd->convert_arg * cmd->scan_end_arg) { + cmd->scan_begin_arg = + cmd->convert_arg * cmd->scan_end_arg; + err++; + } + } + + if (err) + return 4; + + return 0; +} + +/* ++----------------------------------------------------------------------------+ +| Function name : int i_APCI3120_CommandAnalogInput(comedi_device *dev, | +| comedi_subdevice *s) | +| | ++----------------------------------------------------------------------------+ +| Task : Does asynchronous acquisition | +| Determines the mode 1 or 2. | +| | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev | +| comedi_subdevice *s | +| | ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3120_CommandAnalogInput(comedi_device * dev, comedi_subdevice * s) +{ + comedi_cmd *cmd = &s->async->cmd; + + //loading private structure with cmd structure inputs + devpriv->ui_AiFlags = cmd->flags; + devpriv->ui_AiNbrofChannels = cmd->chanlist_len; + devpriv->ui_AiScanLength = cmd->scan_end_arg; + devpriv->pui_AiChannelList = cmd->chanlist; + + //UPDATE-0.7.57->0.7.68devpriv->AiData=s->async->data; + devpriv->AiData = s->async->prealloc_buf; + //UPDATE-0.7.57->0.7.68devpriv->ui_AiDataLength=s->async->data_len; + devpriv->ui_AiDataLength = s->async->prealloc_bufsz; + + if (cmd->stop_src == TRIG_COUNT) { + devpriv->ui_AiNbrofScans = cmd->stop_arg; + } else { + devpriv->ui_AiNbrofScans = 0; + } + + devpriv->ui_AiTimer0 = 0; // variables changed to timer0,timer1 + devpriv->ui_AiTimer1 = 0; + if ((devpriv->ui_AiNbrofScans == 0) || (devpriv->ui_AiNbrofScans == -1)) + devpriv->b_AiContinuous = 1; // user want neverending analog acquisition + // stopped using cancel + + if (cmd->start_src == TRIG_EXT) + devpriv->b_ExttrigEnable = APCI3120_ENABLE; + else + devpriv->b_ExttrigEnable = APCI3120_DISABLE; + + if (cmd->scan_begin_src == TRIG_FOLLOW) { + // mode 1 or 3 + if (cmd->convert_src == TRIG_TIMER) { + // mode 1 + + devpriv->ui_AiTimer0 = cmd->convert_arg; // timer constant in nano seconds + //return this_board->i_hwdrv_CommandAnalogInput(1,dev,s); + return i_APCI3120_CyclicAnalogInput(1, dev, s); + } + + } + if ((cmd->scan_begin_src == TRIG_TIMER) + && (cmd->convert_src == TRIG_TIMER)) { + // mode 2 + devpriv->ui_AiTimer1 = cmd->scan_begin_arg; + devpriv->ui_AiTimer0 = cmd->convert_arg; // variable changed timer2 to timer0 + //return this_board->i_hwdrv_CommandAnalogInput(2,dev,s); + return i_APCI3120_CyclicAnalogInput(2, dev, s); + } + return -1; +} + +/* ++----------------------------------------------------------------------------+ +| Function name : int i_APCI3120_CyclicAnalogInput(int mode, | +| comedi_device * dev,comedi_subdevice * s) | ++----------------------------------------------------------------------------+ +| Task : This is used for analog input cyclic acquisition | +| Performs the command operations. | +| If DMA is configured does DMA initialization | +| otherwise does the acquisition with EOS interrupt. | +| | ++----------------------------------------------------------------------------+ +| Input Parameters : | +| | +| | ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3120_CyclicAnalogInput(int mode, comedi_device * dev, + comedi_subdevice * s) +{ + BYTE b_Tmp; + UINT ui_Tmp, ui_DelayTiming = 0, ui_TimerValue1 = 0, dmalen0 = + 0, dmalen1 = 0, ui_TimerValue2 = + 0, ui_TimerValue0, ui_ConvertTiming; + USHORT us_TmpValue; + + //BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver + //devpriv->b_AiCyclicAcquisition=APCI3120_ENABLE; + //END JK 07.05.04: Comparison between WIN32 and Linux driver + + /*******************/ + /* Resets the FIFO */ + /*******************/ + inb(dev->iobase + APCI3120_RESET_FIFO); + + //BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver + //inw(dev->iobase+APCI3120_RD_STATUS); + //END JK 07.05.04: Comparison between WIN32 and Linux driver + + /***************************/ + /* Acquisition initialized */ + /***************************/ + //BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver + devpriv->b_AiCyclicAcquisition = APCI3120_ENABLE; + //END JK 07.05.04: Comparison between WIN32 and Linux driver + + // clear software registers + devpriv->b_TimerSelectMode = 0; + devpriv->us_OutputRegister = 0; + devpriv->b_ModeSelectRegister = 0; + //devpriv->b_DigitalOutputRegister=0; + + //COMMENT JK 07.05.04: Followings calls are in i_APCI3120_StartAnalogInputAcquisition + + /****************************/ + /* Clear Timer Write TC INT */ + /****************************/ + outl(APCI3120_CLEAR_WRITE_TC_INT, + devpriv->i_IobaseAmcc + APCI3120_AMCC_OP_REG_INTCSR); + + /************************************/ + /* Clears the timer status register */ + /************************************/ + //BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver + //inw(dev->iobase+APCI3120_TIMER_STATUS_REGISTER); + inb(dev->iobase + APCI3120_TIMER_STATUS_REGISTER); + //END JK 07.05.04: Comparison between WIN32 and Linux driver + + /**************************/ + /* Disables All Timer */ + /* Sets PR and PA to 0 */ + /**************************/ + devpriv->us_OutputRegister = devpriv->us_OutputRegister & + APCI3120_DISABLE_TIMER0 & + APCI3120_DISABLE_TIMER1 & APCI3120_CLEAR_PA_PR; + + outw(devpriv->us_OutputRegister, dev->iobase + APCI3120_WR_ADDRESS); + + /*******************/ + /* Resets the FIFO */ + /*******************/ + //BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver + inb(devpriv->iobase + APCI3120_RESET_FIFO); + //END JK 07.05.04: Comparison between WIN32 and Linux driver + + devpriv->ui_AiActualScan = 0; + devpriv->ui_AiActualScanPosition = 0; + s->async->cur_chan = 0; + devpriv->ui_AiBufferPtr = 0; + devpriv->ui_DmaActualBuffer = 0; + + // value for timer2 minus -2 has to be done .....dunno y?? + ui_TimerValue2 = devpriv->ui_AiNbrofScans - 2; + ui_ConvertTiming = devpriv->ui_AiTimer0; + + if (mode == 2) + ui_DelayTiming = devpriv->ui_AiTimer1; + + /**********************************/ + /* Initializes the sequence array */ + /**********************************/ + if (!i_APCI3120_SetupChannelList(dev, s, devpriv->ui_AiNbrofChannels, + devpriv->pui_AiChannelList, 0)) + return -EINVAL; + + us_TmpValue = (USHORT) inw(dev->iobase + APCI3120_RD_STATUS); +/*** EL241003 : add this section in comment because floats must not be used + if((us_TmpValue & 0x00B0)==0x00B0) + { + f_ConvertValue=(((float)ui_ConvertTiming * 0.002) - 2); + ui_TimerValue0=(UINT)f_ConvertValue; + if (mode==2) + { + f_DelayValue = (((float)ui_DelayTiming * 0.00002) - 2); + ui_TimerValue1 = (UINT) f_DelayValue; + } + } + else + { + f_ConvertValue=(((float)ui_ConvertTiming * 0.0012926) - 1); + ui_TimerValue0=(UINT)f_ConvertValue; + if (mode == 2) + { + f_DelayValue = (((float)ui_DelayTiming * 0.000012926) - 1); + ui_TimerValue1 = (UINT) f_DelayValue; + } + } +***********************************************************************************************/ +/*** EL241003 Begin : add this section to replace floats calculation by integer calculations **/ + //EL250804: Testing if board APCI3120 have the new Quartz or if it is an APCI3001 + if ((us_TmpValue & 0x00B0) == 0x00B0 + || !strcmp(this_board->pc_DriverName, "apci3001")) { + ui_TimerValue0 = ui_ConvertTiming * 2 - 2000; + ui_TimerValue0 = ui_TimerValue0 / 1000; + + if (mode == 2) { + ui_DelayTiming = ui_DelayTiming / 1000; + ui_TimerValue1 = ui_DelayTiming * 2 - 200; + ui_TimerValue1 = ui_TimerValue1 / 100; + } + } else { + ui_ConvertTiming = ui_ConvertTiming / 1000; + ui_TimerValue0 = ui_ConvertTiming * 12926 - 10000; + ui_TimerValue0 = ui_TimerValue0 / 10000; + + if (mode == 2) { + ui_DelayTiming = ui_DelayTiming / 1000; + ui_TimerValue1 = ui_DelayTiming * 12926 - 1; + ui_TimerValue1 = ui_TimerValue1 / 1000000; + } + } +/*** EL241003 End ******************************************************************************/ + + if (devpriv->b_ExttrigEnable == APCI3120_ENABLE) { + i_APCI3120_ExttrigEnable(dev); // activate EXT trigger + } + switch (mode) { + case 1: + // init timer0 in mode 2 + devpriv->b_TimerSelectMode = + (devpriv-> + b_TimerSelectMode & 0xFC) | APCI3120_TIMER_0_MODE_2; + outb(devpriv->b_TimerSelectMode, + dev->iobase + APCI3120_TIMER_CRT1); + + //Select Timer 0 + b_Tmp = ((devpriv-> + b_DigitalOutputRegister) & 0xF0) | + APCI3120_SELECT_TIMER_0_WORD; + outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0); + //Set the convertion time + outw(((USHORT) ui_TimerValue0), + dev->iobase + APCI3120_TIMER_VALUE); + break; + + case 2: + // init timer1 in mode 2 + devpriv->b_TimerSelectMode = + (devpriv-> + b_TimerSelectMode & 0xF3) | APCI3120_TIMER_1_MODE_2; + outb(devpriv->b_TimerSelectMode, + dev->iobase + APCI3120_TIMER_CRT1); + + //Select Timer 1 + b_Tmp = ((devpriv-> + b_DigitalOutputRegister) & 0xF0) | + APCI3120_SELECT_TIMER_1_WORD; + outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0); + //Set the convertion time + outw(((USHORT) ui_TimerValue1), + dev->iobase + APCI3120_TIMER_VALUE); + + // init timer0 in mode 2 + devpriv->b_TimerSelectMode = + (devpriv-> + b_TimerSelectMode & 0xFC) | APCI3120_TIMER_0_MODE_2; + outb(devpriv->b_TimerSelectMode, + dev->iobase + APCI3120_TIMER_CRT1); + + //Select Timer 0 + b_Tmp = ((devpriv-> + b_DigitalOutputRegister) & 0xF0) | + APCI3120_SELECT_TIMER_0_WORD; + outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0); + + //Set the convertion time + outw(((USHORT) ui_TimerValue0), + dev->iobase + APCI3120_TIMER_VALUE); + break; + + } + // ##########common for all modes################# + + /***********************/ + /* Clears the SCAN bit */ + /***********************/ + //BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver + //devpriv->b_ModeSelectRegister=devpriv->b_ModeSelectRegister | APCI3120_DISABLE_SCAN; + devpriv->b_ModeSelectRegister = devpriv->b_ModeSelectRegister & + APCI3120_DISABLE_SCAN; + //END JK 07.05.04: Comparison between WIN32 and Linux driver + outb(devpriv->b_ModeSelectRegister, + dev->iobase + APCI3120_WRITE_MODE_SELECT); + + // If DMA is disabled + if (devpriv->us_UseDma == APCI3120_DISABLE) { + // disable EOC and enable EOS + devpriv->b_InterruptMode = APCI3120_EOS_MODE; + devpriv->b_EocEosInterrupt = APCI3120_ENABLE; + + devpriv->b_ModeSelectRegister = + (devpriv-> + b_ModeSelectRegister & APCI3120_DISABLE_EOC_INT) | + APCI3120_ENABLE_EOS_INT; + outb(devpriv->b_ModeSelectRegister, + dev->iobase + APCI3120_WRITE_MODE_SELECT); + + if (!devpriv->b_AiContinuous) { + // configure Timer2 For counting EOS + //Reset gate 2 of Timer 2 to disable it (Set Bit D14 to 0) + devpriv->us_OutputRegister = + devpriv-> + us_OutputRegister & APCI3120_DISABLE_TIMER2; + outw(devpriv->us_OutputRegister, + dev->iobase + APCI3120_WR_ADDRESS); + + // DISABLE TIMER INTERRUPT + devpriv->b_ModeSelectRegister = + devpriv-> + b_ModeSelectRegister & + APCI3120_DISABLE_TIMER_INT & 0xEF; + outb(devpriv->b_ModeSelectRegister, + dev->iobase + APCI3120_WRITE_MODE_SELECT); + + //(1) Init timer 2 in mode 0 and write timer value + devpriv->b_TimerSelectMode = + (devpriv-> + b_TimerSelectMode & 0x0F) | + APCI3120_TIMER_2_MODE_0; + outb(devpriv->b_TimerSelectMode, + dev->iobase + APCI3120_TIMER_CRT1); + + //Writing LOW WORD + b_Tmp = ((devpriv-> + b_DigitalOutputRegister) & 0xF0) | + APCI3120_SELECT_TIMER_2_LOW_WORD; + outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0); + outw(LOWORD(ui_TimerValue2), + dev->iobase + APCI3120_TIMER_VALUE); + + //Writing HIGH WORD + b_Tmp = ((devpriv-> + b_DigitalOutputRegister) & 0xF0) | + APCI3120_SELECT_TIMER_2_HIGH_WORD; + outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0); + outw(HIWORD(ui_TimerValue2), + dev->iobase + APCI3120_TIMER_VALUE); + + //(2) Reset FC_TIMER BIT Clearing timer status register + inb(dev->iobase + APCI3120_TIMER_STATUS_REGISTER); + // enable timer counter and disable watch dog + devpriv->b_ModeSelectRegister = + (devpriv-> + b_ModeSelectRegister | + APCI3120_ENABLE_TIMER_COUNTER) & + APCI3120_DISABLE_WATCHDOG; + // select EOS clock input for timer 2 + devpriv->b_ModeSelectRegister = + devpriv-> + b_ModeSelectRegister | + APCI3120_TIMER2_SELECT_EOS; + // Enable timer2 interrupt + devpriv->b_ModeSelectRegister = + devpriv-> + b_ModeSelectRegister | + APCI3120_ENABLE_TIMER_INT; + outb(devpriv->b_ModeSelectRegister, + dev->iobase + APCI3120_WRITE_MODE_SELECT); + devpriv->b_Timer2Mode = APCI3120_COUNTER; + devpriv->b_Timer2Interrupt = APCI3120_ENABLE; + } + } else { + // If DMA Enabled + //BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver + //inw(dev->iobase+0);// reset EOC bit + //END JK 07.05.04: Comparison between WIN32 and Linux driver + devpriv->b_InterruptMode = APCI3120_DMA_MODE; + + /************************************/ + /* Disables the EOC, EOS interrupt */ + /************************************/ + devpriv->b_ModeSelectRegister = devpriv->b_ModeSelectRegister & + APCI3120_DISABLE_EOC_INT & APCI3120_DISABLE_EOS_INT; + + outb(devpriv->b_ModeSelectRegister, + dev->iobase + APCI3120_WRITE_MODE_SELECT); + + dmalen0 = devpriv->ui_DmaBufferSize[0]; + dmalen1 = devpriv->ui_DmaBufferSize[1]; + + if (!devpriv->b_AiContinuous) { + + if (dmalen0 > (devpriv->ui_AiNbrofScans * devpriv->ui_AiScanLength * 2)) { // must we fill full first buffer? + dmalen0 = + devpriv->ui_AiNbrofScans * + devpriv->ui_AiScanLength * 2; + } else if (dmalen1 > (devpriv->ui_AiNbrofScans * devpriv->ui_AiScanLength * 2 - dmalen0)) // and must we fill full second buffer when first is once filled? + dmalen1 = + devpriv->ui_AiNbrofScans * + devpriv->ui_AiScanLength * 2 - dmalen0; + } + + if (devpriv->ui_AiFlags & TRIG_WAKE_EOS) { + // don't we want wake up every scan? + if (dmalen0 > (devpriv->ui_AiScanLength * 2)) { + dmalen0 = devpriv->ui_AiScanLength * 2; + if (devpriv->ui_AiScanLength & 1) + dmalen0 += 2; + } + if (dmalen1 > (devpriv->ui_AiScanLength * 2)) { + dmalen1 = devpriv->ui_AiScanLength * 2; + if (devpriv->ui_AiScanLength & 1) + dmalen1 -= 2; + if (dmalen1 < 4) + dmalen1 = 4; + } + } else { // isn't output buff smaller that our DMA buff? + if (dmalen0 > (devpriv->ui_AiDataLength)) { + dmalen0 = devpriv->ui_AiDataLength; + } + if (dmalen1 > (devpriv->ui_AiDataLength)) { + dmalen1 = devpriv->ui_AiDataLength; + } + } + devpriv->ui_DmaBufferUsesize[0] = dmalen0; + devpriv->ui_DmaBufferUsesize[1] = dmalen1; + + //Initialize DMA + + // Set Transfer count enable bit and A2P_fifo reset bit in AGCSTS register + //1 + ui_Tmp = AGCSTS_TC_ENABLE | AGCSTS_RESET_A2P_FIFO; + outl(ui_Tmp, devpriv->i_IobaseAmcc + AMCC_OP_REG_AGCSTS); + + // changed since 16 bit interface for add on + /*********************/ + /* ENABLE BUS MASTER */ + /*********************/ + outw(APCI3120_ADD_ON_AGCSTS_LOW, devpriv->i_IobaseAddon + 0); + outw(APCI3120_ENABLE_TRANSFER_ADD_ON_LOW, + devpriv->i_IobaseAddon + 2); + + outw(APCI3120_ADD_ON_AGCSTS_HIGH, devpriv->i_IobaseAddon + 0); + outw(APCI3120_ENABLE_TRANSFER_ADD_ON_HIGH, + devpriv->i_IobaseAddon + 2); + + // TO VERIFIED + //BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver + outw(0x1000, devpriv->i_IobaseAddon + 2); + //END JK 07.05.04: Comparison between WIN32 and Linux driver + + //2 No change + // A2P FIFO MANAGEMENT + // A2P fifo reset & transfer control enable + /***********************/ + /* A2P FIFO MANAGEMENT */ + /***********************/ + outl(APCI3120_A2P_FIFO_MANAGEMENT, devpriv->i_IobaseAmcc + + APCI3120_AMCC_OP_MCSR); + + //3 + //beginning address of dma buf + //The 32 bit address of dma buffer is converted into two 16 bit addresses + // Can done by using _attach and put into into an array + // array used may be for differnet pages + + // DMA Start Adress Low + outw(APCI3120_ADD_ON_MWAR_LOW, devpriv->i_IobaseAddon + 0); + outw((devpriv->ul_DmaBufferHw[0] & 0xFFFF), + devpriv->i_IobaseAddon + 2); + + /*************************/ + /* DMA Start Adress High */ + /*************************/ + outw(APCI3120_ADD_ON_MWAR_HIGH, devpriv->i_IobaseAddon + 0); + outw((devpriv->ul_DmaBufferHw[0] / 65536), + devpriv->i_IobaseAddon + 2); + + //4 + // amount of bytes to be transfered set transfer count + // used ADDON MWTC register + //commented testing outl(devpriv->ui_DmaBufferUsesize[0], devpriv->i_IobaseAddon+AMCC_OP_REG_AMWTC); + + /**************************/ + /* Nbr of acquisition LOW */ + /**************************/ + outw(APCI3120_ADD_ON_MWTC_LOW, devpriv->i_IobaseAddon + 0); + outw((devpriv->ui_DmaBufferUsesize[0] & 0xFFFF), + devpriv->i_IobaseAddon + 2); + + /***************************/ + /* Nbr of acquisition HIGH */ + /***************************/ + outw(APCI3120_ADD_ON_MWTC_HIGH, devpriv->i_IobaseAddon + 0); + outw((devpriv->ui_DmaBufferUsesize[0] / 65536), + devpriv->i_IobaseAddon + 2); + + //5 + // To configure A2P FIFO + // testing outl( FIFO_ADVANCE_ON_BYTE_2,devpriv->i_IobaseAmcc+AMCC_OP_REG_INTCSR); + + /******************/ + /* A2P FIFO RESET */ + /******************/ + // TO VERIFY + //BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver + outl(0x04000000UL, devpriv->i_IobaseAmcc + AMCC_OP_REG_MCSR); + //END JK 07.05.04: Comparison between WIN32 and Linux driver + + //6 + //ENABLE A2P FIFO WRITE AND ENABLE AMWEN + // AMWEN_ENABLE | A2P_FIFO_WRITE_ENABLE (0x01|0x02)=0x03 + //BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver + //outw(3,devpriv->i_IobaseAddon + 4); + //END JK 07.05.04: Comparison between WIN32 and Linux driver + + //7 + //initialise end of dma interrupt AINT_WRITE_COMPL = ENABLE_WRITE_TC_INT(ADDI) + /***************************************************/ + /* A2P FIFO CONFIGURATE, END OF DMA INTERRUPT INIT */ + /***************************************************/ + outl((APCI3120_FIFO_ADVANCE_ON_BYTE_2 | + APCI3120_ENABLE_WRITE_TC_INT), + devpriv->i_IobaseAmcc + AMCC_OP_REG_INTCSR); + + //BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver + /******************************************/ + /* ENABLE A2P FIFO WRITE AND ENABLE AMWEN */ + /******************************************/ + outw(3, devpriv->i_IobaseAddon + 4); + //END JK 07.05.04: Comparison between WIN32 and Linux driver + + /******************/ + /* A2P FIFO RESET */ + /******************/ + //BEGIN JK 07.05.04: Comparison between WIN32 and Linux driver + outl(0x04000000UL, + devpriv->i_IobaseAmcc + APCI3120_AMCC_OP_MCSR); + //END JK 07.05.04: Comparison between WIN32 and Linux driver + } + + if ((devpriv->us_UseDma == APCI3120_DISABLE) + && !devpriv->b_AiContinuous) { + // set gate 2 to start conversion + devpriv->us_OutputRegister = + devpriv->us_OutputRegister | APCI3120_ENABLE_TIMER2; + outw(devpriv->us_OutputRegister, + dev->iobase + APCI3120_WR_ADDRESS); + } + + switch (mode) { + case 1: + // set gate 0 to start conversion + devpriv->us_OutputRegister = + devpriv->us_OutputRegister | APCI3120_ENABLE_TIMER0; + outw(devpriv->us_OutputRegister, + dev->iobase + APCI3120_WR_ADDRESS); + break; + case 2: + // set gate 0 and gate 1 + devpriv->us_OutputRegister = + devpriv->us_OutputRegister | APCI3120_ENABLE_TIMER1; + devpriv->us_OutputRegister = + devpriv->us_OutputRegister | APCI3120_ENABLE_TIMER0; + outw(devpriv->us_OutputRegister, + dev->iobase + APCI3120_WR_ADDRESS); + break; + + } + + return 0; + +} + +/* ++----------------------------------------------------------------------------+ +| INTERNAL FUNCTIONS | ++----------------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Function name : int i_APCI3120_Reset(comedi_device *dev) | +| | +| | ++----------------------------------------------------------------------------+ +| Task : Hardware reset function | +| | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev | +| | +| | ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3120_Reset(comedi_device * dev) +{ + unsigned int i; + unsigned short us_TmpValue; + + devpriv->b_AiCyclicAcquisition = APCI3120_DISABLE; + devpriv->b_EocEosInterrupt = APCI3120_DISABLE; + devpriv->b_InterruptMode = APCI3120_EOC_MODE; + devpriv->ui_EocEosConversionTime = 0; // set eoc eos conv time to 0 + devpriv->b_OutputMemoryStatus = 0; + + // variables used in timer subdevice + devpriv->b_Timer2Mode = 0; + devpriv->b_Timer2Interrupt = 0; + devpriv->b_ExttrigEnable = 0; // Disable ext trigger + + /* Disable all interrupts, watchdog for the anolog output */ + devpriv->b_ModeSelectRegister = 0; + outb(devpriv->b_ModeSelectRegister, + dev->iobase + APCI3120_WRITE_MODE_SELECT); + + // Disables all counters, ext trigger and clears PA, PR + devpriv->us_OutputRegister = 0; + outw(devpriv->us_OutputRegister, dev->iobase + APCI3120_WR_ADDRESS); + + //Code to set the all anolog o/p channel to 0v + //8191 is decimal value for zero(0 v)volt in bipolar mode(default) + outw(8191 | APCI3120_ANALOG_OP_CHANNEL_1, dev->iobase + APCI3120_ANALOG_OUTPUT_1); //channel 1 + outw(8191 | APCI3120_ANALOG_OP_CHANNEL_2, dev->iobase + APCI3120_ANALOG_OUTPUT_1); //channel 2 + outw(8191 | APCI3120_ANALOG_OP_CHANNEL_3, dev->iobase + APCI3120_ANALOG_OUTPUT_1); //channel 3 + outw(8191 | APCI3120_ANALOG_OP_CHANNEL_4, dev->iobase + APCI3120_ANALOG_OUTPUT_1); //channel 4 + + outw(8191 | APCI3120_ANALOG_OP_CHANNEL_5, dev->iobase + APCI3120_ANALOG_OUTPUT_2); //channel 5 + outw(8191 | APCI3120_ANALOG_OP_CHANNEL_6, dev->iobase + APCI3120_ANALOG_OUTPUT_2); //channel 6 + outw(8191 | APCI3120_ANALOG_OP_CHANNEL_7, dev->iobase + APCI3120_ANALOG_OUTPUT_2); //channel 7 + outw(8191 | APCI3120_ANALOG_OP_CHANNEL_8, dev->iobase + APCI3120_ANALOG_OUTPUT_2); //channel 8 + + // Reset digital output to L0W + +//ES05 outb(0x0,dev->iobase+APCI3120_DIGITAL_OUTPUT); + udelay(10); + + inw(dev->iobase + 0); //make a dummy read + inb(dev->iobase + APCI3120_RESET_FIFO); // flush FIFO + inw(dev->iobase + APCI3120_RD_STATUS); // flush A/D status register + + //code to reset the RAM sequence + for (i = 0; i < 16; i++) { + us_TmpValue = i << 8; //select the location + outw(us_TmpValue, dev->iobase + APCI3120_SEQ_RAM_ADDRESS); + } + return 0; +} + +/* ++----------------------------------------------------------------------------+ +| Function name : int i_APCI3120_SetupChannelList(comedi_device * dev, | +| comedi_subdevice * s, int n_chan,unsigned int *chanlist| +| ,char check) | +| | ++----------------------------------------------------------------------------+ +| Task :This function will first check channel list is ok or not| +|and then initialize the sequence RAM with the polarity, Gain,Channel number | +|If the last argument of function "check"is 1 then it only checks the channel| +|list is ok or not. | +| | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device * dev | +| comedi_subdevice * s | +| int n_chan | + unsigned int *chanlist + char check ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3120_SetupChannelList(comedi_device * dev, comedi_subdevice * s, + int n_chan, unsigned int *chanlist, char check) +{ + unsigned int i; //, differencial=0, bipolar=0; + unsigned int gain; + unsigned short us_TmpValue; + + /* correct channel and range number check itself comedi/range.c */ + if (n_chan < 1) { + if (!check) + comedi_error(dev, "range/channel list is empty!"); + return 0; + } + // All is ok, so we can setup channel/range list + if (check) + return 1; + + //Code to set the PA and PR...Here it set PA to 0.. + devpriv->us_OutputRegister = + devpriv->us_OutputRegister & APCI3120_CLEAR_PA_PR; + devpriv->us_OutputRegister = ((n_chan - 1) & 0xf) << 8; + outw(devpriv->us_OutputRegister, dev->iobase + APCI3120_WR_ADDRESS); + + for (i = 0; i < n_chan; i++) { + // store range list to card + us_TmpValue = CR_CHAN(chanlist[i]); // get channel number; + + if (CR_RANGE(chanlist[i]) < APCI3120_BIPOLAR_RANGES) { + us_TmpValue &= ((~APCI3120_UNIPOLAR) & 0xff); // set bipolar + } else { + us_TmpValue |= APCI3120_UNIPOLAR; // enable unipolar...... + } + + gain = CR_RANGE(chanlist[i]); // get gain number + us_TmpValue |= ((gain & 0x03) << 4); //<<4 for G0 and G1 bit in RAM + us_TmpValue |= i << 8; //To select the RAM LOCATION.... + outw(us_TmpValue, dev->iobase + APCI3120_SEQ_RAM_ADDRESS); + + printk("\n Gain = %i", + (((unsigned char)CR_RANGE(chanlist[i]) & 0x03) << 2)); + printk("\n Channel = %i", CR_CHAN(chanlist[i])); + printk("\n Polarity = %i", us_TmpValue & APCI3120_UNIPOLAR); + } + return 1; // we can serve this with scan logic +} + +/* ++----------------------------------------------------------------------------+ +| Function name : int i_APCI3120_ExttrigEnable(comedi_device * dev) | +| | +| | ++----------------------------------------------------------------------------+ +| Task : Enable the external trigger | +| | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device * dev | +| | +| | ++----------------------------------------------------------------------------+ +| Return Value : 0 | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3120_ExttrigEnable(comedi_device * dev) +{ + + devpriv->us_OutputRegister |= APCI3120_ENABLE_EXT_TRIGGER; + outw(devpriv->us_OutputRegister, dev->iobase + APCI3120_WR_ADDRESS); + return 0; +} + +/* ++----------------------------------------------------------------------------+ +| Function name : int i_APCI3120_ExttrigDisable(comedi_device * dev) | +| | ++----------------------------------------------------------------------------+ +| Task : Disables the external trigger | +| | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device * dev | +| | +| | ++----------------------------------------------------------------------------+ +| Return Value : 0 | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3120_ExttrigDisable(comedi_device * dev) +{ + devpriv->us_OutputRegister &= ~APCI3120_ENABLE_EXT_TRIGGER; + outw(devpriv->us_OutputRegister, dev->iobase + APCI3120_WR_ADDRESS); + return 0; +} + +/* ++----------------------------------------------------------------------------+ +| INTERRUPT FUNCTIONS | ++----------------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Function name : void v_APCI3120_Interrupt(int irq, void *d) | +| | +| | ++----------------------------------------------------------------------------+ +| Task :Interrupt handler for APCI3120 | +| When interrupt occurs this gets called. | +| First it finds which interrupt has been generated and | +| handles corresponding interrupt | +| | ++----------------------------------------------------------------------------+ +| Input Parameters : int irq | +| void *d | +| | ++----------------------------------------------------------------------------+ +| Return Value : void | +| | ++----------------------------------------------------------------------------+ +*/ + +void v_APCI3120_Interrupt(int irq, void *d) +{ + comedi_device *dev = d; + USHORT int_daq; + + unsigned int int_amcc, ui_Check, i; + USHORT us_TmpValue; + BYTE b_DummyRead; + + comedi_subdevice *s = dev->subdevices + 0; + ui_Check = 1; + + int_daq = inw(dev->iobase + APCI3120_RD_STATUS) & 0xf000; // get IRQ reasons + int_amcc = inl(devpriv->i_IobaseAmcc + AMCC_OP_REG_INTCSR); // get AMCC INT register + + if ((!int_daq) && (!(int_amcc & ANY_S593X_INT))) { + comedi_error(dev, "IRQ from unknow source"); + return; + } + + outl(int_amcc | 0x00ff0000, devpriv->i_IobaseAmcc + AMCC_OP_REG_INTCSR); // shutdown IRQ reasons in AMCC + + int_daq = (int_daq >> 12) & 0xF; + + if (devpriv->b_ExttrigEnable == APCI3120_ENABLE) { + //Disable ext trigger + i_APCI3120_ExttrigDisable(dev); + devpriv->b_ExttrigEnable = APCI3120_DISABLE; + } + //clear the timer 2 interrupt + inb(devpriv->i_IobaseAmcc + APCI3120_TIMER_STATUS_REGISTER); + + if (int_amcc & MASTER_ABORT_INT) + comedi_error(dev, "AMCC IRQ - MASTER DMA ABORT!"); + if (int_amcc & TARGET_ABORT_INT) + comedi_error(dev, "AMCC IRQ - TARGET DMA ABORT!"); + + // Ckeck if EOC interrupt + if (((int_daq & 0x8) == 0) + && (devpriv->b_InterruptMode == APCI3120_EOC_MODE)) { + if (devpriv->b_EocEosInterrupt == APCI3120_ENABLE) { + + // Read the AI Value + + devpriv->ui_AiReadData[0] = + (UINT) inw(devpriv->iobase + 0); + devpriv->b_EocEosInterrupt = APCI3120_DISABLE; + send_sig(SIGIO, devpriv->tsk_Current, 0); // send signal to the sample + } else { + //Disable EOC Interrupt + devpriv->b_ModeSelectRegister = + devpriv-> + b_ModeSelectRegister & APCI3120_DISABLE_EOC_INT; + outb(devpriv->b_ModeSelectRegister, + devpriv->iobase + APCI3120_WRITE_MODE_SELECT); + + } + } + + // Check If EOS interrupt + if ((int_daq & 0x2) && (devpriv->b_InterruptMode == APCI3120_EOS_MODE)) { + + if (devpriv->b_EocEosInterrupt == APCI3120_ENABLE) // enable this in without DMA ??? + { + + if (devpriv->b_AiCyclicAcquisition == APCI3120_ENABLE) { + ui_Check = 0; + i_APCI3120_InterruptHandleEos(dev); + devpriv->ui_AiActualScan++; + devpriv->b_ModeSelectRegister = + devpriv-> + b_ModeSelectRegister | + APCI3120_ENABLE_EOS_INT; + outb(devpriv->b_ModeSelectRegister, + dev->iobase + + APCI3120_WRITE_MODE_SELECT); + } else { + ui_Check = 0; + for (i = 0; i < devpriv->ui_AiNbrofChannels; + i++) { + us_TmpValue = inw(devpriv->iobase + 0); + devpriv->ui_AiReadData[i] = + (UINT) us_TmpValue; + } + devpriv->b_EocEosInterrupt = APCI3120_DISABLE; + devpriv->b_InterruptMode = APCI3120_EOC_MODE; + + send_sig(SIGIO, devpriv->tsk_Current, 0); // send signal to the sample + + } + + } else { + devpriv->b_ModeSelectRegister = + devpriv-> + b_ModeSelectRegister & APCI3120_DISABLE_EOS_INT; + outb(devpriv->b_ModeSelectRegister, + dev->iobase + APCI3120_WRITE_MODE_SELECT); + devpriv->b_EocEosInterrupt = APCI3120_DISABLE; //Default settings + devpriv->b_InterruptMode = APCI3120_EOC_MODE; + } + + } + //Timer2 interrupt + if (int_daq & 0x1) { + + switch (devpriv->b_Timer2Mode) { + case APCI3120_COUNTER: + + devpriv->b_AiCyclicAcquisition = APCI3120_DISABLE; + devpriv->b_ModeSelectRegister = + devpriv-> + b_ModeSelectRegister & APCI3120_DISABLE_EOS_INT; + outb(devpriv->b_ModeSelectRegister, + dev->iobase + APCI3120_WRITE_MODE_SELECT); + + // stop timer 2 + devpriv->us_OutputRegister = + devpriv-> + us_OutputRegister & APCI3120_DISABLE_ALL_TIMER; + outw(devpriv->us_OutputRegister, + dev->iobase + APCI3120_WR_ADDRESS); + + //stop timer 0 and timer 1 + i_APCI3120_StopCyclicAcquisition(dev, s); + devpriv->b_AiCyclicAcquisition = APCI3120_DISABLE; + + //UPDATE-0.7.57->0.7.68comedi_done(dev,s); + s->async->events |= COMEDI_CB_EOA; + comedi_event(dev, s); + + break; + + case APCI3120_TIMER: + + //Send a signal to from kernel to user space + send_sig(SIGIO, devpriv->tsk_Current, 0); + break; + + case APCI3120_WATCHDOG: + + //Send a signal to from kernel to user space + send_sig(SIGIO, devpriv->tsk_Current, 0); + break; + + default: + + // disable Timer Interrupt + + devpriv->b_ModeSelectRegister = + devpriv-> + b_ModeSelectRegister & + APCI3120_DISABLE_TIMER_INT; + + outb(devpriv->b_ModeSelectRegister, + dev->iobase + APCI3120_WRITE_MODE_SELECT); + + } + + b_DummyRead = inb(dev->iobase + APCI3120_TIMER_STATUS_REGISTER); + + } + + if ((int_daq & 0x4) && (devpriv->b_InterruptMode == APCI3120_DMA_MODE)) { + if (devpriv->b_AiCyclicAcquisition == APCI3120_ENABLE) { + + /****************************/ + /* Clear Timer Write TC INT */ + /****************************/ + + outl(APCI3120_CLEAR_WRITE_TC_INT, + devpriv->i_IobaseAmcc + + APCI3120_AMCC_OP_REG_INTCSR); + + /************************************/ + /* Clears the timer status register */ + /************************************/ + inw(dev->iobase + APCI3120_TIMER_STATUS_REGISTER); + v_APCI3120_InterruptDma(irq, d); // do some data transfer + } else { + /* Stops the Timer */ + outw(devpriv-> + us_OutputRegister & APCI3120_DISABLE_TIMER0 & + APCI3120_DISABLE_TIMER1, + dev->iobase + APCI3120_WR_ADDRESS); + } + + } + + return; +} + +/* ++----------------------------------------------------------------------------+ +| Function name :int i_APCI3120_InterruptHandleEos(comedi_device *dev) | +| | +| | ++----------------------------------------------------------------------------+ +| Task : This function handles EOS interrupt. | +| This function copies the acquired data(from FIFO) | +| to Comedi buffer. | +| | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev | +| | +| | ++----------------------------------------------------------------------------+ +| Return Value : 0 | +| | ++----------------------------------------------------------------------------+ +*/ + +/*int i_APCI3120_InterruptHandleEos(comedi_device *dev) +{ + int n_chan,i; + sampl_t *data; + comedi_subdevice *s=dev->subdevices+0; + comedi_async *async = s->async; + data=async->data+async->buf_int_ptr;//new samples added from here onwards + n_chan=devpriv->ui_AiNbrofChannels; + + for(i=0;iiobase+0); + } + async->buf_int_count+=n_chan*sizeof(sampl_t); + async->buf_int_ptr+=n_chan*sizeof(sampl_t); + comedi_eos(dev,s); + if (s->async->buf_int_ptr>=s->async->data_len) // for buffer rool over + { +*//* buffer rollover */ +/* s->async->buf_int_ptr=0; + comedi_eobuf(dev,s); + } + return 0; +}*/ +int i_APCI3120_InterruptHandleEos(comedi_device * dev) +{ + int n_chan, i; + comedi_subdevice *s = dev->subdevices + 0; + int err = 1; + + n_chan = devpriv->ui_AiNbrofChannels; + + s->async->events = 0; + + for (i = 0; i < n_chan; i++) + err &= comedi_buf_put(s->async, inw(dev->iobase + 0)); + + s->async->events |= COMEDI_CB_EOS; + + if (err == 0) + s->async->events |= COMEDI_CB_OVERFLOW; + + comedi_event(dev, s); + + return 0; +} + +/* ++----------------------------------------------------------------------------+ +| Function name : void v_APCI3120_InterruptDma(int irq, void *d) | +| | ++----------------------------------------------------------------------------+ +| Task : This is a handler for the DMA interrupt | +| This function copies the data to Comedi Buffer. | +| For continuous DMA it reinitializes the DMA operation. | +| For single mode DMA it stop the acquisition. | +| | ++----------------------------------------------------------------------------+ +| Input Parameters : int irq, void *d | +| | ++----------------------------------------------------------------------------+ +| Return Value : void | +| | ++----------------------------------------------------------------------------+ +*/ + +void v_APCI3120_InterruptDma(int irq, void *d) +{ + comedi_device *dev = d; + comedi_subdevice *s = dev->subdevices + 0; + unsigned int next_dma_buf, samplesinbuf; + unsigned long low_word, high_word, var; + + UINT ui_Tmp; + samplesinbuf = + devpriv->ui_DmaBufferUsesize[devpriv->ui_DmaActualBuffer] - + inl(devpriv->i_IobaseAmcc + AMCC_OP_REG_MWTC); + + if (samplesinbuf < + devpriv->ui_DmaBufferUsesize[devpriv->ui_DmaActualBuffer]) { + comedi_error(dev, "Interrupted DMA transfer!"); + } + if (samplesinbuf & 1) { + comedi_error(dev, "Odd count of bytes in DMA ring!"); + i_APCI3120_StopCyclicAcquisition(dev, s); + devpriv->b_AiCyclicAcquisition = APCI3120_DISABLE; + + return; + } + samplesinbuf = samplesinbuf >> 1; // number of received samples + if (devpriv->b_DmaDoubleBuffer) { + // switch DMA buffers if is used double buffering + next_dma_buf = 1 - devpriv->ui_DmaActualBuffer; + + ui_Tmp = AGCSTS_TC_ENABLE | AGCSTS_RESET_A2P_FIFO; + outl(ui_Tmp, devpriv->i_IobaseAddon + AMCC_OP_REG_AGCSTS); + + // changed since 16 bit interface for add on + outw(APCI3120_ADD_ON_AGCSTS_LOW, devpriv->i_IobaseAddon + 0); + outw(APCI3120_ENABLE_TRANSFER_ADD_ON_LOW, + devpriv->i_IobaseAddon + 2); + outw(APCI3120_ADD_ON_AGCSTS_HIGH, devpriv->i_IobaseAddon + 0); + outw(APCI3120_ENABLE_TRANSFER_ADD_ON_HIGH, devpriv->i_IobaseAddon + 2); // 0x1000 is out putted in windows driver + + var = devpriv->ul_DmaBufferHw[next_dma_buf]; + low_word = var & 0xffff; + var = devpriv->ul_DmaBufferHw[next_dma_buf]; + high_word = var / 65536; + + /* DMA Start Adress Low */ + outw(APCI3120_ADD_ON_MWAR_LOW, devpriv->i_IobaseAddon + 0); + outw(low_word, devpriv->i_IobaseAddon + 2); + + /* DMA Start Adress High */ + outw(APCI3120_ADD_ON_MWAR_HIGH, devpriv->i_IobaseAddon + 0); + outw(high_word, devpriv->i_IobaseAddon + 2); + + var = devpriv->ui_DmaBufferUsesize[next_dma_buf]; + low_word = var & 0xffff; + var = devpriv->ui_DmaBufferUsesize[next_dma_buf]; + high_word = var / 65536; + + /* Nbr of acquisition LOW */ + outw(APCI3120_ADD_ON_MWTC_LOW, devpriv->i_IobaseAddon + 0); + outw(low_word, devpriv->i_IobaseAddon + 2); + + /* Nbr of acquisition HIGH */ + outw(APCI3120_ADD_ON_MWTC_HIGH, devpriv->i_IobaseAddon + 0); + outw(high_word, devpriv->i_IobaseAddon + 2); + + // To configure A2P FIFO + // ENABLE A2P FIFO WRITE AND ENABLE AMWEN + // AMWEN_ENABLE | A2P_FIFO_WRITE_ENABLE (0x01|0x02)=0x03 + outw(3, devpriv->i_IobaseAddon + 4); + //initialise end of dma interrupt AINT_WRITE_COMPL = ENABLE_WRITE_TC_INT(ADDI) + outl((APCI3120_FIFO_ADVANCE_ON_BYTE_2 | + APCI3120_ENABLE_WRITE_TC_INT), + devpriv->i_IobaseAmcc + AMCC_OP_REG_INTCSR); + + } +/*UPDATE-0.7.57->0.7.68 + ptr=(sampl_t *)devpriv->ul_DmaBufferVirtual[devpriv->ui_DmaActualBuffer]; + + + // if there is not enough space left in the buffer to copy all data contained in the DMABufferVirtual + if(s->async->buf_int_ptr+samplesinbuf*sizeof(sampl_t)>=devpriv->ui_AiDataLength) + { + m=(devpriv->ui_AiDataLength-s->async->buf_int_ptr)/sizeof(sampl_t); + v_APCI3120_InterruptDmaMoveBlock16bit(dev,s,(void *)ptr,((void *)(devpriv->AiData))+s->async->buf_int_ptr,m); + s->async->buf_int_count+=m*sizeof(sampl_t); + ptr+=m*sizeof(sampl_t); + samplesinbuf-=m; + s->async->buf_int_ptr=0; + comedi_eobuf(dev,s); + } + + if (samplesinbuf) + { + v_APCI3120_InterruptDmaMoveBlock16bit(dev,s,(void *)ptr,((void *)(devpriv->AiData))+s->async->buf_int_ptr,samplesinbuf); + + s->async->buf_int_count+=samplesinbuf*sizeof(sampl_t); + s->async->buf_int_ptr+=samplesinbuf*sizeof(sampl_t); + if (!(devpriv->ui_AiFlags & TRIG_WAKE_EOS)) + { + comedi_bufcheck(dev,s); + } + } + if (!devpriv->b_AiContinuous) + if ( devpriv->ui_AiActualScan>=devpriv->ui_AiNbrofScans ) + { + // all data sampled + i_APCI3120_StopCyclicAcquisition(dev,s); + devpriv->b_AiCyclicAcquisition=APCI3120_DISABLE; + //DPRINTK("\n Single DMA completed..\n"); + comedi_done(dev,s); + return; + } +*/ + if (samplesinbuf) { + v_APCI3120_InterruptDmaMoveBlock16bit(dev, s, + devpriv->ul_DmaBufferVirtual[devpriv-> + ui_DmaActualBuffer], samplesinbuf); + + if (!(devpriv->ui_AiFlags & TRIG_WAKE_EOS)) { + s->async->events |= COMEDI_CB_EOS; + comedi_event(dev, s); + } + } + if (!devpriv->b_AiContinuous) + if (devpriv->ui_AiActualScan >= devpriv->ui_AiNbrofScans) { + // all data sampled + i_APCI3120_StopCyclicAcquisition(dev, s); + devpriv->b_AiCyclicAcquisition = APCI3120_DISABLE; + s->async->events |= COMEDI_CB_EOA; + comedi_event(dev, s); + return; + } + + if (devpriv->b_DmaDoubleBuffer) { // switch dma buffers + devpriv->ui_DmaActualBuffer = 1 - devpriv->ui_DmaActualBuffer; + } else { + // restart DMA if is not used double buffering + //ADDED REINITIALISE THE DMA + ui_Tmp = AGCSTS_TC_ENABLE | AGCSTS_RESET_A2P_FIFO; + outl(ui_Tmp, devpriv->i_IobaseAddon + AMCC_OP_REG_AGCSTS); + + // changed since 16 bit interface for add on + outw(APCI3120_ADD_ON_AGCSTS_LOW, devpriv->i_IobaseAddon + 0); + outw(APCI3120_ENABLE_TRANSFER_ADD_ON_LOW, + devpriv->i_IobaseAddon + 2); + outw(APCI3120_ADD_ON_AGCSTS_HIGH, devpriv->i_IobaseAddon + 0); + outw(APCI3120_ENABLE_TRANSFER_ADD_ON_HIGH, devpriv->i_IobaseAddon + 2); // + // A2P FIFO MANAGEMENT + // A2P fifo reset & transfer control enable + outl(APCI3120_A2P_FIFO_MANAGEMENT, + devpriv->i_IobaseAmcc + AMCC_OP_REG_MCSR); + + var = devpriv->ul_DmaBufferHw[0]; + low_word = var & 0xffff; + var = devpriv->ul_DmaBufferHw[0]; + high_word = var / 65536; + outw(APCI3120_ADD_ON_MWAR_LOW, devpriv->i_IobaseAddon + 0); + outw(low_word, devpriv->i_IobaseAddon + 2); + outw(APCI3120_ADD_ON_MWAR_HIGH, devpriv->i_IobaseAddon + 0); + outw(high_word, devpriv->i_IobaseAddon + 2); + + var = devpriv->ui_DmaBufferUsesize[0]; + low_word = var & 0xffff; //changed + var = devpriv->ui_DmaBufferUsesize[0]; + high_word = var / 65536; + outw(APCI3120_ADD_ON_MWTC_LOW, devpriv->i_IobaseAddon + 0); + outw(low_word, devpriv->i_IobaseAddon + 2); + outw(APCI3120_ADD_ON_MWTC_HIGH, devpriv->i_IobaseAddon + 0); + outw(high_word, devpriv->i_IobaseAddon + 2); + + // To configure A2P FIFO + //ENABLE A2P FIFO WRITE AND ENABLE AMWEN + // AMWEN_ENABLE | A2P_FIFO_WRITE_ENABLE (0x01|0x02)=0x03 + outw(3, devpriv->i_IobaseAddon + 4); + //initialise end of dma interrupt AINT_WRITE_COMPL = ENABLE_WRITE_TC_INT(ADDI) + outl((APCI3120_FIFO_ADVANCE_ON_BYTE_2 | + APCI3120_ENABLE_WRITE_TC_INT), + devpriv->i_IobaseAmcc + AMCC_OP_REG_INTCSR); + } +} + +/* ++----------------------------------------------------------------------------+ +| Function name :void v_APCI3120_InterruptDmaMoveBlock16bit(comedi_device| +|*dev,comedi_subdevice *s,sampl_t *dma,sampl_t *data,int n) | +| | ++----------------------------------------------------------------------------+ +| Task : This function copies the data from DMA buffer to the | +| Comedi buffer | +| | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev | +| comedi_subdevice *s | +| sampl_t *dma | +| sampl_t *data,int n | ++----------------------------------------------------------------------------+ +| Return Value : void | +| | ++----------------------------------------------------------------------------+ +*/ + +/*void v_APCI3120_InterruptDmaMoveBlock16bit(comedi_device *dev,comedi_subdevice *s,sampl_t *dma,sampl_t *data,int n) +{ + int i,j,m; + + j=s->async->cur_chan; + m=devpriv->ui_AiActualScanPosition; + for(i=0;i=devpriv->ui_AiNbrofChannels) + { + m+=j; + j=0; + if(m>=devpriv->ui_AiScanLength) + { + m=0; + devpriv->ui_AiActualScan++; + if (devpriv->ui_AiFlags & TRIG_WAKE_EOS) +;//UPDATE-0.7.57->0.7.68 comedi_eos(dev,s); + } + } + } + devpriv->ui_AiActualScanPosition=m; + s->async->cur_chan=j; + +} +*/ +void v_APCI3120_InterruptDmaMoveBlock16bit(comedi_device * dev, + comedi_subdevice * s, sampl_t * dma_buffer, unsigned int num_samples) +{ + devpriv->ui_AiActualScan += + (s->async->cur_chan + num_samples) / devpriv->ui_AiScanLength; + s->async->cur_chan += num_samples; + s->async->cur_chan %= devpriv->ui_AiScanLength; + + cfc_write_array_to_buffer(s, dma_buffer, num_samples * sizeof(sampl_t)); +} + +/* ++----------------------------------------------------------------------------+ +| TIMER SUBDEVICE | ++----------------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Function name :int i_APCI3120_InsnConfigTimer(comedi_device *dev, | +| comedi_subdevice *s,comedi_insn *insn,lsampl_t *data) | +| | ++----------------------------------------------------------------------------+ +| Task :Configure Timer 2 | +| | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev | +| comedi_subdevice *s | +| comedi_insn *insn | +| lsampl_t *data | +| | +| data[0]= TIMER configure as timer | +| = WATCHDOG configure as watchdog | +| data[1] = Timer constant | +| data[2] = Timer2 interrupt (1)enable or(0) disable | +| | ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3120_InsnConfigTimer(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + + UINT ui_Timervalue2; + USHORT us_TmpValue; + BYTE b_Tmp; + + if (!data[1]) + comedi_error(dev, "config:No timer constant !"); + + devpriv->b_Timer2Interrupt = (BYTE) data[2]; // save info whether to enable or disable interrupt + + ui_Timervalue2 = data[1] / 1000; // convert nano seconds to u seconds + + //this_board->i_hwdrv_InsnConfigTimer(dev, ui_Timervalue2,(BYTE)data[0]); + us_TmpValue = (USHORT) inw(devpriv->iobase + APCI3120_RD_STATUS); + + //EL250804: Testing if board APCI3120 have the new Quartz or if it is an APCI3001 + // and calculate the time value to set in the timer + if ((us_TmpValue & 0x00B0) == 0x00B0 + || !strcmp(this_board->pc_DriverName, "apci3001")) { + //Calculate the time value to set in the timer + ui_Timervalue2 = ui_Timervalue2 / 50; + } else { + //Calculate the time value to set in the timer + ui_Timervalue2 = ui_Timervalue2 / 70; + } + + //Reset gate 2 of Timer 2 to disable it (Set Bit D14 to 0) + devpriv->us_OutputRegister = + devpriv->us_OutputRegister & APCI3120_DISABLE_TIMER2; + outw(devpriv->us_OutputRegister, devpriv->iobase + APCI3120_WR_ADDRESS); + + // Disable TIMER Interrupt + devpriv->b_ModeSelectRegister = + devpriv-> + b_ModeSelectRegister & APCI3120_DISABLE_TIMER_INT & 0xEF; + + // Disable Eoc and Eos Interrupts + devpriv->b_ModeSelectRegister = + devpriv-> + b_ModeSelectRegister & APCI3120_DISABLE_EOC_INT & + APCI3120_DISABLE_EOS_INT; + outb(devpriv->b_ModeSelectRegister, + devpriv->iobase + APCI3120_WRITE_MODE_SELECT); + if (data[0] == APCI3120_TIMER) //initialize timer + { + + //devpriv->b_ModeSelectRegister=devpriv->b_ModeSelectRegister| APCI3120_ENABLE_TIMER_INT ; + //outb(devpriv->b_ModeSelectRegister,devpriv->iobase+APCI3120_WRITE_MODE_SELECT); + + //Set the Timer 2 in mode 2(Timer) + devpriv->b_TimerSelectMode = + (devpriv-> + b_TimerSelectMode & 0x0F) | APCI3120_TIMER_2_MODE_2; + outb(devpriv->b_TimerSelectMode, + devpriv->iobase + APCI3120_TIMER_CRT1); + + //Configure the timer 2 for writing the LOW WORD of timer is Delay value + //You must make a b_tmp variable with DigitalOutPutRegister because at Address_1+APCI3120_TIMER_CRT0 + //you can set the digital output and configure the timer 2,and if you don't make this, digital output + //are erase (Set to 0) + + //Writing LOW WORD + b_Tmp = ((devpriv-> + b_DigitalOutputRegister) & 0xF0) | + APCI3120_SELECT_TIMER_2_LOW_WORD; + outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0); + outw(LOWORD(ui_Timervalue2), + devpriv->iobase + APCI3120_TIMER_VALUE); + + //Writing HIGH WORD + b_Tmp = ((devpriv-> + b_DigitalOutputRegister) & 0xF0) | + APCI3120_SELECT_TIMER_2_HIGH_WORD; + outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0); + outw(HIWORD(ui_Timervalue2), + devpriv->iobase + APCI3120_TIMER_VALUE); + // timer2 in Timer mode enabled + devpriv->b_Timer2Mode = APCI3120_TIMER; + + } else // Initialize Watch dog + { + + //Set the Timer 2 in mode 5(Watchdog) + + devpriv->b_TimerSelectMode = + (devpriv-> + b_TimerSelectMode & 0x0F) | APCI3120_TIMER_2_MODE_5; + outb(devpriv->b_TimerSelectMode, + devpriv->iobase + APCI3120_TIMER_CRT1); + + //Configure the timer 2 for writing the LOW WORD of timer is Delay value + //You must make a b_tmp variable with DigitalOutPutRegister because at Address_1+APCI3120_TIMER_CRT0 + //you can set the digital output and configure the timer 2,and if you don't make this, digital output + //are erase (Set to 0) + + //Writing LOW WORD + b_Tmp = ((devpriv-> + b_DigitalOutputRegister) & 0xF0) | + APCI3120_SELECT_TIMER_2_LOW_WORD; + outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0); + outw(LOWORD(ui_Timervalue2), + devpriv->iobase + APCI3120_TIMER_VALUE); + + //Writing HIGH WORD + b_Tmp = ((devpriv-> + b_DigitalOutputRegister) & 0xF0) | + APCI3120_SELECT_TIMER_2_HIGH_WORD; + outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0); + + outw(HIWORD(ui_Timervalue2), + devpriv->iobase + APCI3120_TIMER_VALUE); + //watchdog enabled + devpriv->b_Timer2Mode = APCI3120_WATCHDOG; + + } + + return insn->n; + +} + +/* ++----------------------------------------------------------------------------+ +| Function name :int i_APCI3120_InsnWriteTimer(comedi_device *dev, | +| comedi_subdevice *s, comedi_insn *insn,lsampl_t *data) | +| | ++----------------------------------------------------------------------------+ +| Task : To start and stop the timer | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev | +| comedi_subdevice *s | +| comedi_insn *insn | +| lsampl_t *data | +| | +| data[0] = 1 (start) | +| data[0] = 0 (stop ) | +| data[0] = 2 (write new value) | +| data[1]= new value | +| | +| devpriv->b_Timer2Mode = 0 DISABLE | +| 1 Timer | +| 2 Watch dog | +| | ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3120_InsnWriteTimer(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + + UINT ui_Timervalue2 = 0; + USHORT us_TmpValue; + BYTE b_Tmp; + + if ((devpriv->b_Timer2Mode != APCI3120_WATCHDOG) + && (devpriv->b_Timer2Mode != APCI3120_TIMER)) { + comedi_error(dev, "\nwrite:timer2 not configured "); + return -EINVAL; + } + + if (data[0] == 2) // write new value + { + if (devpriv->b_Timer2Mode != APCI3120_TIMER) { + comedi_error(dev, + "write :timer2 not configured in TIMER MODE"); + return -EINVAL; + } + + if (data[1]) + ui_Timervalue2 = data[1]; + else + ui_Timervalue2 = 0; + } + + //this_board->i_hwdrv_InsnWriteTimer(dev,data[0],ui_Timervalue2); + + switch (data[0]) { + case APCI3120_START: + + // Reset FC_TIMER BIT + inb(devpriv->iobase + APCI3120_TIMER_STATUS_REGISTER); + if (devpriv->b_Timer2Mode == APCI3120_TIMER) //start timer + { + //Enable Timer + devpriv->b_ModeSelectRegister = + devpriv->b_ModeSelectRegister & 0x0B; + } else //start watch dog + { + //Enable WatchDog + devpriv->b_ModeSelectRegister = + (devpriv-> + b_ModeSelectRegister & 0x0B) | + APCI3120_ENABLE_WATCHDOG; + } + + //enable disable interrupt + if ((devpriv->b_Timer2Interrupt) == APCI3120_ENABLE) { + + devpriv->b_ModeSelectRegister = + devpriv-> + b_ModeSelectRegister | + APCI3120_ENABLE_TIMER_INT; + // save the task structure to pass info to user + devpriv->tsk_Current = current; + } else { + + devpriv->b_ModeSelectRegister = + devpriv-> + b_ModeSelectRegister & + APCI3120_DISABLE_TIMER_INT; + } + outb(devpriv->b_ModeSelectRegister, + devpriv->iobase + APCI3120_WRITE_MODE_SELECT); + + if (devpriv->b_Timer2Mode == APCI3120_TIMER) //start timer + { + //For Timer mode is Gate2 must be activated **timer started + devpriv->us_OutputRegister = + devpriv-> + us_OutputRegister | APCI3120_ENABLE_TIMER2; + outw(devpriv->us_OutputRegister, + devpriv->iobase + APCI3120_WR_ADDRESS); + } + + break; + + case APCI3120_STOP: + if (devpriv->b_Timer2Mode == APCI3120_TIMER) { + //Disable timer + devpriv->b_ModeSelectRegister = + devpriv-> + b_ModeSelectRegister & + APCI3120_DISABLE_TIMER_COUNTER; + } else { + //Disable WatchDog + devpriv->b_ModeSelectRegister = + devpriv-> + b_ModeSelectRegister & + APCI3120_DISABLE_WATCHDOG; + } + // Disable timer interrupt + devpriv->b_ModeSelectRegister = + devpriv-> + b_ModeSelectRegister & APCI3120_DISABLE_TIMER_INT; + + // Write above states to register + outb(devpriv->b_ModeSelectRegister, + devpriv->iobase + APCI3120_WRITE_MODE_SELECT); + + // Reset Gate 2 + devpriv->us_OutputRegister = + devpriv->us_OutputRegister & APCI3120_DISABLE_TIMER_INT; + outw(devpriv->us_OutputRegister, + devpriv->iobase + APCI3120_WR_ADDRESS); + + // Reset FC_TIMER BIT + inb(devpriv->iobase + APCI3120_TIMER_STATUS_REGISTER); + + // Disable timer + //devpriv->b_Timer2Mode=APCI3120_DISABLE; + + break; + + case 2: //write new value to Timer + if (devpriv->b_Timer2Mode != APCI3120_TIMER) { + comedi_error(dev, + "write :timer2 not configured in TIMER MODE"); + return -EINVAL; + } + // ui_Timervalue2=data[1]; // passed as argument + us_TmpValue = + (USHORT) inw(devpriv->iobase + APCI3120_RD_STATUS); + + //EL250804: Testing if board APCI3120 have the new Quartz or if it is an APCI3001 + // and calculate the time value to set in the timer + if ((us_TmpValue & 0x00B0) == 0x00B0 + || !strcmp(this_board->pc_DriverName, "apci3001")) { + //Calculate the time value to set in the timer + ui_Timervalue2 = ui_Timervalue2 / 50; + } else { + //Calculate the time value to set in the timer + ui_Timervalue2 = ui_Timervalue2 / 70; + } + //Writing LOW WORD + b_Tmp = ((devpriv-> + b_DigitalOutputRegister) & 0xF0) | + APCI3120_SELECT_TIMER_2_LOW_WORD; + outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0); + + outw(LOWORD(ui_Timervalue2), + devpriv->iobase + APCI3120_TIMER_VALUE); + + //Writing HIGH WORD + b_Tmp = ((devpriv-> + b_DigitalOutputRegister) & 0xF0) | + APCI3120_SELECT_TIMER_2_HIGH_WORD; + outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0); + + outw(HIWORD(ui_Timervalue2), + devpriv->iobase + APCI3120_TIMER_VALUE); + + break; + default: + return -EINVAL; // Not a valid input + } + + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function name : int i_APCI3120_InsnReadTimer(comedi_device *dev, | +| comedi_subdevice *s,comedi_insn *insn, lsampl_t *data) | +| | +| | ++----------------------------------------------------------------------------+ +| Task : read the Timer value | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev | +| comedi_subdevice *s | +| comedi_insn *insn | +| lsampl_t *data | +| | ++----------------------------------------------------------------------------+ +| Return Value : | +| for Timer: data[0]= Timer constant | +| | +| for watchdog: data[0]=0 (still running) | +| data[0]=1 (run down) | +| | ++----------------------------------------------------------------------------+ +*/ +int i_APCI3120_InsnReadTimer(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + BYTE b_Tmp; + USHORT us_TmpValue, us_TmpValue_2, us_StatusValue; + + if ((devpriv->b_Timer2Mode != APCI3120_WATCHDOG) + && (devpriv->b_Timer2Mode != APCI3120_TIMER)) { + comedi_error(dev, "\nread:timer2 not configured "); + } + + //this_board->i_hwdrv_InsnReadTimer(dev,data); + if (devpriv->b_Timer2Mode == APCI3120_TIMER) { + + //Read the LOW WORD of Timer 2 register + b_Tmp = ((devpriv-> + b_DigitalOutputRegister) & 0xF0) | + APCI3120_SELECT_TIMER_2_LOW_WORD; + outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0); + + us_TmpValue = inw(devpriv->iobase + APCI3120_TIMER_VALUE); + + //Read the HIGH WORD of Timer 2 register + b_Tmp = ((devpriv-> + b_DigitalOutputRegister) & 0xF0) | + APCI3120_SELECT_TIMER_2_HIGH_WORD; + outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0); + + us_TmpValue_2 = inw(devpriv->iobase + APCI3120_TIMER_VALUE); + + // combining both words + data[0] = (UINT) ((us_TmpValue) | ((us_TmpValue_2) << 16)); + + } else // Read watch dog status + { + + us_StatusValue = inw(devpriv->iobase + APCI3120_RD_STATUS); + us_StatusValue = + ((us_StatusValue & APCI3120_FC_TIMER) >> 12) & 1; + if (us_StatusValue == 1) { + // RESET FC_TIMER BIT + inb(devpriv->iobase + APCI3120_TIMER_STATUS_REGISTER); + } + data[0] = us_StatusValue; // when data[0] = 1 then the watch dog has rundown + } + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| DIGITAL INPUT SUBDEVICE | ++----------------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Function name :int i_APCI3120_InsnReadDigitalInput(comedi_device *dev, | +| comedi_subdevice *s, comedi_insn *insn,lsampl_t *data) | +| | +| | ++----------------------------------------------------------------------------+ +| Task : Reads the value of the specified Digital input channel| +| | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev | +| comedi_subdevice *s | +| comedi_insn *insn | +| lsampl_t *data | ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3120_InsnReadDigitalInput(comedi_device * dev, comedi_subdevice + * s, comedi_insn * insn, lsampl_t * data) +{ + UINT ui_Chan, ui_TmpValue; + + ui_Chan = CR_CHAN(insn->chanspec); // channel specified + + //this_board->i_hwdrv_InsnReadDigitalInput(dev,ui_Chan,data); + if (ui_Chan >= 0 && ui_Chan <= 3) { + ui_TmpValue = (UINT) inw(devpriv->iobase + APCI3120_RD_STATUS); + + // since only 1 channel reqd to bring it to last bit it is rotated + // 8 +(chan - 1) times then ANDed with 1 for last bit. + *data = (ui_TmpValue >> (ui_Chan + 8)) & 1; + //return 0; + } else { + // comedi_error(dev," chan spec wrong"); + return -EINVAL; // "sorry channel spec wrong " + } + return insn->n; + +} + +/* ++----------------------------------------------------------------------------+ +| Function name :int i_APCI3120_InsnBitsDigitalInput(comedi_device *dev, | +|comedi_subdevice *s, comedi_insn *insn,lsampl_t *data) | +| | ++----------------------------------------------------------------------------+ +| Task : Reads the value of the Digital input Port i.e.4channels| +| value is returned in data[0] | +| | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev | +| comedi_subdevice *s | +| comedi_insn *insn | +| lsampl_t *data | ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ +int i_APCI3120_InsnBitsDigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_TmpValue; + ui_TmpValue = (UINT) inw(devpriv->iobase + APCI3120_RD_STATUS); + /***** state of 4 channels in the 11, 10, 9, 8 bits of status reg + rotated right 8 times to bring them to last four bits + ANDed with oxf for value. + *****/ + + *data = (ui_TmpValue >> 8) & 0xf; + //this_board->i_hwdrv_InsnBitsDigitalInput(dev,data); + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| DIGITAL OUTPUT SUBDEVICE | ++----------------------------------------------------------------------------+ +*/ +/* ++----------------------------------------------------------------------------+ +| Function name :int i_APCI3120_InsnConfigDigitalOutput(comedi_device | +| *dev,comedi_subdevice *s,comedi_insn *insn,lsampl_t *data) | +| | ++----------------------------------------------------------------------------+ +| Task :Configure the output memory ON or OFF | +| | ++----------------------------------------------------------------------------+ +| Input Parameters :comedi_device *dev | +| comedi_subdevice *s | +| comedi_insn *insn | +| lsampl_t *data | ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3120_InsnConfigDigitalOutput(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + + if ((data[0] != 0) && (data[0] != 1)) { + comedi_error(dev, + "Not a valid Data !!! ,Data should be 1 or 0\n"); + return -EINVAL; + } + if (data[0]) { + devpriv->b_OutputMemoryStatus = APCI3120_ENABLE; + + } else { + devpriv->b_OutputMemoryStatus = APCI3120_DISABLE; + devpriv->b_DigitalOutputRegister = 0; + } + if (!devpriv->b_OutputMemoryStatus) { + ui_Temp = 0; + + } //if(!devpriv->b_OutputMemoryStatus ) + + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function name :int i_APCI3120_InsnBitsDigitalOutput(comedi_device *dev, | +| comedi_subdevice *s, comedi_insn *insn,lsampl_t *data) | +| | ++----------------------------------------------------------------------------+ +| Task : write diatal output port | +| | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev | +| comedi_subdevice *s | +| comedi_insn *insn | +| lsampl_t *data | + data[0] Value to be written + data[1] :1 Set digital o/p ON + data[1] 2 Set digital o/p OFF with memory ON ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3120_InsnBitsDigitalOutput(comedi_device * dev, comedi_subdevice + * s, comedi_insn * insn, lsampl_t * data) +{ + if ((data[0] > this_board->i_DoMaxdata) || (data[0] < 0)) { + + comedi_error(dev, "Data is not valid !!! \n"); + return -EINVAL; + } + + switch (data[1]) { + case 1: + data[0] = (data[0] << 4) | devpriv->b_DigitalOutputRegister; + break; + + case 2: + data[0] = data[0]; + break; + default: + printk("\nThe parameter passed is in error \n"); + return -EINVAL; + } // switch(data[1]) + outb(data[0], devpriv->iobase + APCI3120_DIGITAL_OUTPUT); + + devpriv->b_DigitalOutputRegister = data[0] & 0xF0; + + return insn->n; + +} + +/* ++----------------------------------------------------------------------------+ +| Function name :int i_APCI3120_InsnWriteDigitalOutput(comedi_device *dev,| +|comedi_subdevice *s,comedi_insn *insn,lsampl_t *data) | +| | ++----------------------------------------------------------------------------+ +| Task : Write digiatl output | +| | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev | +| comedi_subdevice *s | +| comedi_insn *insn | +| lsampl_t *data | + data[0] Value to be written + data[1] :1 Set digital o/p ON + data[1] 2 Set digital o/p OFF with memory ON ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3120_InsnWriteDigitalOutput(comedi_device * dev, comedi_subdevice + * s, comedi_insn * insn, lsampl_t * data) +{ + + UINT ui_Temp1; + + UINT ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel + + if ((data[0] != 0) && (data[0] != 1)) { + comedi_error(dev, + "Not a valid Data !!! ,Data should be 1 or 0\n"); + return -EINVAL; + } + if ((ui_NoOfChannel > (this_board->i_NbrDoChannel - 1)) + || (ui_NoOfChannel < 0)) { + comedi_error(dev, + "This board doesn't have specified channel !!! \n"); + return -EINVAL; + } + + switch (data[1]) { + case 1: + data[0] = (data[0] << ui_NoOfChannel); +//ES05 data[0]=(data[0]<<4)|ui_Temp; + data[0] = (data[0] << 4) | devpriv->b_DigitalOutputRegister; + break; + + case 2: + data[0] = ~data[0] & 0x1; + ui_Temp1 = 1; + ui_Temp1 = ui_Temp1 << ui_NoOfChannel; + ui_Temp1 = ui_Temp1 << 4; +//ES05 ui_Temp=ui_Temp|ui_Temp1; + devpriv->b_DigitalOutputRegister = + devpriv->b_DigitalOutputRegister | ui_Temp1; + + data[0] = (data[0] << ui_NoOfChannel) ^ 0xf; + data[0] = data[0] << 4; +//ES05 data[0]=data[0]& ui_Temp; + data[0] = data[0] & devpriv->b_DigitalOutputRegister; + break; + default: + printk("\nThe parameter passed is in error \n"); + return -EINVAL; + } // switch(data[1]) + outb(data[0], devpriv->iobase + APCI3120_DIGITAL_OUTPUT); + +//ES05 ui_Temp=data[0] & 0xf0; + devpriv->b_DigitalOutputRegister = data[0] & 0xf0; + return (insn->n); + +} + +/* ++----------------------------------------------------------------------------+ +| ANALOG OUTPUT SUBDEVICE | ++----------------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Function name :int i_APCI3120_InsnWriteAnalogOutput(comedi_device *dev,| +|comedi_subdevice *s, comedi_insn *insn,lsampl_t *data) | +| | ++----------------------------------------------------------------------------+ +| Task : Write analog output | +| | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev | +| comedi_subdevice *s | +| comedi_insn *insn | +| lsampl_t *data | ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3120_InsnWriteAnalogOutput(comedi_device * dev, comedi_subdevice + * s, comedi_insn * insn, lsampl_t * data) +{ + UINT ui_Range, ui_Channel; + USHORT us_TmpValue; + + ui_Range = CR_RANGE(insn->chanspec); + ui_Channel = CR_CHAN(insn->chanspec); + + //this_board->i_hwdrv_InsnWriteAnalogOutput(dev, ui_Range, ui_Channel,data[0]); + if (ui_Range) // if 1 then unipolar + { + + if (data[0] != 0) + data[0] = + ((((ui_Channel & 0x03) << 14) & 0xC000) | (1 << + 13) | (data[0] + 8191)); + else + data[0] = + ((((ui_Channel & 0x03) << 14) & 0xC000) | (1 << + 13) | 8192); + + } else // if 0 then bipolar + { + data[0] = + ((((ui_Channel & 0x03) << 14) & 0xC000) | (0 << 13) | + data[0]); + + } + + //out put n values at the given channel. + // rt_printk("\nwaiting for DA_READY BIT"); + do //Waiting of DA_READY BIT + { + us_TmpValue = + ((USHORT) inw(devpriv->iobase + + APCI3120_RD_STATUS)) & 0x0001; + } while (us_TmpValue != 0x0001); + + if (ui_Channel <= 3) + // for channel 0-3 out at the register 1 (wrDac1-8) + // data[i] typecasted to ushort since word write is to be done + outw((USHORT) data[0], + devpriv->iobase + APCI3120_ANALOG_OUTPUT_1); + else + // for channel 4-7 out at the register 2 (wrDac5-8) + //data[i] typecasted to ushort since word write is to be done + outw((USHORT) data[0], + devpriv->iobase + APCI3120_ANALOG_OUTPUT_2); + + return insn->n; +} --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h @@ -0,0 +1,276 @@ + +// hwdrv_apci3120.h + +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstrasse 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-----------------------------------------------------------------------+ + | Project : ADDI DATA | Compiler : GCC | + | Modulname : hwdrv_apci3120.h | Version : 2.96 Redhat Linux | + | | kernel-2.4.2 | + +-------------------------------+---------------------------------------+ + | Author : | Date : | + +-----------------------------------------------------------------------+ + | Description :Header file for apci3120 hardware abstraction layer | + +-----------------------------------------------------------------------+ + | UPDATE'S | + +-----------------------------------------------------------------------+ + | Date | Author | Description of updates | + +----------+-----------+------------------------------------------------+ + | | | | + | | | | + | | | | + | | | | + | | | | + +----------+-----------+------------------------------------------------+ + | | | | + | | | | + | | | | + +----------+-----------+------------------------------------------------+ +*/ + +// comedi related defines + +//ANALOG INPUT RANGE +static const comedi_lrange range_apci3120_ai = { 8, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2), + BIP_RANGE(1), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2), + UNI_RANGE(1) + } +}; + +// ANALOG OUTPUT RANGE +static const comedi_lrange range_apci3120_ao = { 2, { + BIP_RANGE(10), + UNI_RANGE(10) + } +}; + +#define APCI3120_BIPOLAR_RANGES 4 // used for test on mixture of BIP/UNI ranges + +#define APCI3120_BOARD_VENDOR_ID 0x10E8 +#define APCI3120_ADDRESS_RANGE 16 + +#define APCI3120_DISABLE 0 +#define APCI3120_ENABLE 1 + +#define APCI3120_START 1 +#define APCI3120_STOP 0 + +#define APCI3120_EOC_MODE 1 +#define APCI3120_EOS_MODE 2 +#define APCI3120_DMA_MODE 3 + +//DIGITAL INPUT-OUTPUT DEFINE + +#define APCI3120_DIGITAL_OUTPUT 0x0D +#define APCI3120_RD_STATUS 0x02 +#define APCI3120_RD_FIFO 0x00 + +// digital output insn_write ON /OFF selection +#define APCI3120_SET4DIGITALOUTPUTON 1 +#define APCI3120_SET4DIGITALOUTPUTOFF 0 + +// analog output SELECT BIT +#define APCI3120_ANALOG_OP_CHANNEL_1 0x0000 +#define APCI3120_ANALOG_OP_CHANNEL_2 0x4000 +#define APCI3120_ANALOG_OP_CHANNEL_3 0x8000 +#define APCI3120_ANALOG_OP_CHANNEL_4 0xC000 +#define APCI3120_ANALOG_OP_CHANNEL_5 0x0000 +#define APCI3120_ANALOG_OP_CHANNEL_6 0x4000 +#define APCI3120_ANALOG_OP_CHANNEL_7 0x8000 +#define APCI3120_ANALOG_OP_CHANNEL_8 0xC000 + +// Enable external trigger bit in nWrAddress +#define APCI3120_ENABLE_EXT_TRIGGER 0x8000 + +//ANALOG OUTPUT AND INPUT DEFINE +#define APCI3120_UNIPOLAR 0x80 //$$ RAM sequence polarity BIT +#define APCI3120_BIPOLAR 0x00 //$$ RAM sequence polarity BIT +#define APCI3120_ANALOG_OUTPUT_1 0x08 // (ADDRESS ) +#define APCI3120_ANALOG_OUTPUT_2 0x0A // (ADDRESS ) +#define APCI3120_1_GAIN 0x00 //$$ RAM sequence Gain Bits for gain 1 +#define APCI3120_2_GAIN 0x10 //$$ RAM sequence Gain Bits for gain 2 +#define APCI3120_5_GAIN 0x20 //$$ RAM sequence Gain Bits for gain 5 +#define APCI3120_10_GAIN 0x30 //$$ RAM sequence Gain Bits for gain 10 +#define APCI3120_SEQ_RAM_ADDRESS 0x06 //$$ EARLIER NAMED APCI3120_FIFO_ADDRESS +#define APCI3120_RESET_FIFO 0x0C //(ADDRESS) +#define APCI3120_TIMER_0_MODE_2 0x01 //$$ Bits for timer mode +#define APCI3120_TIMER_0_MODE_4 0x2 +#define APCI3120_SELECT_TIMER_0_WORD 0x00 +#define APCI3120_ENABLE_TIMER0 0x1000 //$$Gatebit 0 in nWrAddress +#define APCI3120_CLEAR_PR 0xF0FF +#define APCI3120_CLEAR_PA 0xFFF0 +#define APCI3120_CLEAR_PA_PR (APCI3120_CLEAR_PR & APCI3120_CLEAR_PA) + +// nWrMode_Select +#define APCI3120_ENABLE_SCAN 0x8 //$$ bit in nWrMode_Select +#define APCI3120_DISABLE_SCAN (~APCI3120_ENABLE_SCAN) +#define APCI3120_ENABLE_EOS_INT 0x2 //$$ bit in nWrMode_Select + +#define APCI3120_DISABLE_EOS_INT (~APCI3120_ENABLE_EOS_INT) +#define APCI3120_ENABLE_EOC_INT 0x1 +#define APCI3120_DISABLE_EOC_INT (~APCI3120_ENABLE_EOC_INT) +#define APCI3120_DISABLE_ALL_INTERRUPT_WITHOUT_TIMER (APCI3120_DISABLE_EOS_INT & APCI3120_DISABLE_EOC_INT) +#define APCI3120_DISABLE_ALL_INTERRUPT (APCI3120_DISABLE_TIMER_INT & APCI3120_DISABLE_EOS_INT & APCI3120_DISABLE_EOC_INT) + +//status register bits +#define APCI3120_EOC 0x8000 +#define APCI3120_EOS 0x2000 + +// software trigger dummy register +#define APCI3120_START_CONVERSION 0x02 //(ADDRESS) + +//TIMER DEFINE +#define APCI3120_QUARTZ_A 70 +#define APCI3120_QUARTZ_B 50 +#define APCI3120_TIMER 1 +#define APCI3120_WATCHDOG 2 +#define APCI3120_TIMER_DISABLE 0 +#define APCI3120_TIMER_ENABLE 1 +#define APCI3120_ENABLE_TIMER2 0x4000 //$$ gatebit 2 in nWrAddress +#define APCI3120_DISABLE_TIMER2 (~APCI3120_ENABLE_TIMER2) +#define APCI3120_ENABLE_TIMER_INT 0x04 //$$ ENAIRQ_FC_Bit in nWrModeSelect +#define APCI3120_DISABLE_TIMER_INT (~APCI3120_ENABLE_TIMER_INT) +#define APCI3120_WRITE_MODE_SELECT 0x0E // (ADDRESS) +#define APCI3120_SELECT_TIMER_0_WORD 0x00 +#define APCI3120_SELECT_TIMER_1_WORD 0x01 +#define APCI3120_TIMER_1_MODE_2 0x4 + +//$$ BIT FOR MODE IN nCsTimerCtr1 +#define APCI3120_TIMER_2_MODE_0 0x0 +#define APCI3120_TIMER_2_MODE_2 0x10 +#define APCI3120_TIMER_2_MODE_5 0x30 + +//$$ BIT FOR MODE IN nCsTimerCtr0 +#define APCI3120_SELECT_TIMER_2_LOW_WORD 0x02 +#define APCI3120_SELECT_TIMER_2_HIGH_WORD 0x03 + +#define APCI3120_TIMER_CRT0 0x0D //(ADDRESS for cCsTimerCtr0) +#define APCI3120_TIMER_CRT1 0x0C //(ADDRESS for cCsTimerCtr1) + +#define APCI3120_TIMER_VALUE 0x04 //ADDRESS for nCsTimerWert +#define APCI3120_TIMER_STATUS_REGISTER 0x0D //ADDRESS for delete timer 2 interrupt +#define APCI3120_RD_STATUS 0x02 //ADDRESS +#define APCI3120_WR_ADDRESS 0x00 //ADDRESS +#define APCI3120_ENABLE_WATCHDOG 0x20 //$$BIT in nWrMode_Select +#define APCI3120_DISABLE_WATCHDOG (~APCI3120_ENABLE_WATCHDOG) +#define APCI3120_ENABLE_TIMER_COUNTER 0x10 //$$BIT in nWrMode_Select +#define APCI3120_DISABLE_TIMER_COUNTER (~APCI3120_ENABLE_TIMER_COUNTER) +#define APCI3120_FC_TIMER 0x1000 //bit in status register +#define APCI3120_ENABLE_TIMER0 0x1000 +#define APCI3120_ENABLE_TIMER1 0x2000 +#define APCI3120_ENABLE_TIMER2 0x4000 +#define APCI3120_DISABLE_TIMER0 (~APCI3120_ENABLE_TIMER0) +#define APCI3120_DISABLE_TIMER1 (~APCI3120_ENABLE_TIMER1) +#define APCI3120_DISABLE_TIMER2 (~APCI3120_ENABLE_TIMER2) + +#define APCI3120_TIMER2_SELECT_EOS 0xC0 // ADDED on 20-6 +#define APCI3120_COUNTER 3 // on 20-6 +#define APCI3120_DISABLE_ALL_TIMER ( APCI3120_DISABLE_TIMER0 & APCI3120_DISABLE_TIMER1 & APCI3120_DISABLE_TIMER2 ) // on 20-6 + +#define MAX_ANALOGINPUT_CHANNELS 32 + +typedef struct { + BYTE b_Type; /* EOC or EOS */ + BYTE b_InterruptFlag; /* Interrupt use or not */ + UINT ui_ConvertTiming; /* Selection of the convertion time */ + BYTE b_NbrOfChannel; /* Number of channel to read */ + UINT ui_ChannelList[MAX_ANALOGINPUT_CHANNELS]; /* Number of the channel to be read */ + UINT ui_RangeList[MAX_ANALOGINPUT_CHANNELS]; /* Gain of each channel */ + +} str_AnalogReadInformation; + +// Function Declaration For APCI-3120 + +// Internal functions +int i_APCI3120_SetupChannelList(comedi_device * dev, comedi_subdevice * s, + int n_chan, unsigned int *chanlist, char check); +int i_APCI3120_ExttrigEnable(comedi_device * dev); +int i_APCI3120_ExttrigDisable(comedi_device * dev); +int i_APCI3120_StopCyclicAcquisition(comedi_device * dev, comedi_subdevice * s); +int i_APCI3120_Reset(comedi_device * dev); +int i_APCI3120_CyclicAnalogInput(int mode, comedi_device * dev, + comedi_subdevice * s); +// Interrupt functions +void v_APCI3120_Interrupt(int irq, void *d); +//UPDATE-0.7.57->0.7.68 void v_APCI3120_InterruptDmaMoveBlock16bit(comedi_device *dev,comedi_subdevice *s,sampl_t *dma,sampl_t *data,int n); +void v_APCI3120_InterruptDmaMoveBlock16bit(comedi_device * dev, + comedi_subdevice * s, sampl_t * dma_buffer, unsigned int num_samples); +int i_APCI3120_InterruptHandleEos(comedi_device * dev); +void v_APCI3120_InterruptDma(int irq, void *d); + +// TIMER + +int i_APCI3120_InsnConfigTimer(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +int i_APCI3120_InsnWriteTimer(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +int i_APCI3120_InsnReadTimer(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +//DI +// for di read + +int i_APCI3120_InsnBitsDigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +int i_APCI3120_InsnReadDigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +//DO +//int i_APCI3120_WriteDigitalOutput(comedi_device *dev, BYTE data); +int i_APCI3120_InsnConfigDigitalOutput(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); +int i_APCI3120_InsnBitsDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +int i_APCI3120_InsnWriteDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +//AO +//int i_APCI3120_Write1AnalogValue(comedi_device *dev,UINT ui_Range,UINT ui_Channel,UINT data ); +int i_APCI3120_InsnWriteAnalogOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +//AI HArdware layer + +int i_APCI3120_InsnConfigAnalogInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +int i_APCI3120_InsnReadAnalogInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +int i_APCI3120_CommandTestAnalogInput(comedi_device * dev, comedi_subdevice * s, + comedi_cmd * cmd); +int i_APCI3120_CommandAnalogInput(comedi_device * dev, comedi_subdevice * s); +//int i_APCI3120_CancelAnalogInput(comedi_device * dev, comedi_subdevice * s); +int i_APCI3120_StopCyclicAcquisition(comedi_device * dev, comedi_subdevice * s); --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c @@ -0,0 +1,3642 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-------------------------------+---------------------------------------+ + | Project : APCI-3200 | Compiler : GCC | + | Module name : hwdrv_apci3200.c| Version : 2.96 | + +-------------------------------+---------------------------------------+ + | Project manager: Eric Stolz | Date : 02/12/2002 | + +-------------------------------+---------------------------------------+ + | Description : Hardware Layer Acces For APCI-3200 | + +-----------------------------------------------------------------------+ + | UPDATES | + +----------+-----------+------------------------------------------------+ + | Date | Author | Description of updates | + +----------+-----------+------------------------------------------------+ + | 02.07.04 | J. Krauth | Modification from the driver in order to | + | | | correct some errors when using several boards. | + | | | | + | | | | + +----------+-----------+------------------------------------------------+ + | 26.10.04 | J. Krauth | - Update for COMEDI 0.7.68 | + | | | - Read eeprom value | + | | | - Append APCI-3300 | + +----------+-----------+------------------------------------------------+ +*/ + +/* + +----------------------------------------------------------------------------+ + | Included files | + +----------------------------------------------------------------------------+ +*/ +#include "hwdrv_apci3200.h" +//Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values +#include "addi_amcc_S5920.h" +//#define PRINT_INFO + +//End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + +//BEGIN JK 06.07.04: Management of sevrals boards +/* + INT i_CJCAvailable=1; + INT i_CJCPolarity=0; + INT i_CJCGain=2;//changed from 0 to 2 + INT i_InterruptFlag=0; + INT i_ADDIDATAPolarity; + INT i_ADDIDATAGain; + INT i_AutoCalibration=0; //: auto calibration + INT i_ADDIDATAConversionTime; + INT i_ADDIDATAConversionTimeUnit; + INT i_ADDIDATAType; + INT i_ChannelNo; + INT i_ChannelCount=0; + INT i_ScanType; + INT i_FirstChannel; + INT i_LastChannel; + INT i_Sum=0; + INT i_Offset; + UINT ui_Channel_num=0; + static int i_Count=0; + INT i_Initialised=0; + UINT ui_InterruptChannelValue[96]; //Buffer +*/ +str_BoardInfos s_BoardInfos[100]; // 100 will be the max number of boards to be used +//END JK 06.07.04: Management of sevrals boards + +//Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + +/*+----------------------------------------------------------------------------+*/ +/*| Function Name : INT i_AddiHeaderRW_ReadEeprom |*/ +/*| (INT i_NbOfWordsToRead, |*/ +/*| DWORD dw_PCIBoardEepromAddress, |*/ +/*| WORD w_EepromStartAddress, |*/ +/*| PWORD pw_DataRead) |*/ +/*+----------------------------------------------------------------------------+*/ +/*| Task : Read word from the 5920 eeprom. |*/ +/*+----------------------------------------------------------------------------+*/ +/*| Input Parameters : INT i_NbOfWordsToRead : Nbr. of word to read |*/ +/*| DWORD dw_PCIBoardEepromAddress : Address of the eeprom |*/ +/*| WORD w_EepromStartAddress : Eeprom strat address |*/ +/*+----------------------------------------------------------------------------+*/ +/*| Output Parameters : PWORD pw_DataRead : Read data |*/ +/*+----------------------------------------------------------------------------+*/ +/*| Return Value : - |*/ +/*+----------------------------------------------------------------------------+*/ + +INT i_AddiHeaderRW_ReadEeprom(INT i_NbOfWordsToRead, + DWORD dw_PCIBoardEepromAddress, + WORD w_EepromStartAddress, PWORD pw_DataRead) +{ + DWORD dw_eeprom_busy = 0; + INT i_Counter = 0; + INT i_WordCounter; + INT i; + BYTE pb_ReadByte[1]; + BYTE b_ReadLowByte = 0; + BYTE b_ReadHighByte = 0; + BYTE b_SelectedAddressLow = 0; + BYTE b_SelectedAddressHigh = 0; + WORD w_ReadWord = 0; + + for (i_WordCounter = 0; i_WordCounter < i_NbOfWordsToRead; + i_WordCounter++) { + do { + dw_eeprom_busy = + inl(dw_PCIBoardEepromAddress + + AMCC_OP_REG_MCSR); + dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; + } + while (dw_eeprom_busy == EEPROM_BUSY); + + for (i_Counter = 0; i_Counter < 2; i_Counter++) { + b_SelectedAddressLow = (w_EepromStartAddress + i_Counter) % 256; //Read the low 8 bit part + b_SelectedAddressHigh = (w_EepromStartAddress + i_Counter) / 256; //Read the high 8 bit part + + //Select the load low address mode + outb(NVCMD_LOAD_LOW, + dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR + + 3); + + //Wait on busy + do { + dw_eeprom_busy = + inl(dw_PCIBoardEepromAddress + + AMCC_OP_REG_MCSR); + dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; + } + while (dw_eeprom_busy == EEPROM_BUSY); + + //Load the low address + outb(b_SelectedAddressLow, + dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR + + 2); + + //Wait on busy + do { + dw_eeprom_busy = + inl(dw_PCIBoardEepromAddress + + AMCC_OP_REG_MCSR); + dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; + } + while (dw_eeprom_busy == EEPROM_BUSY); + + //Select the load high address mode + outb(NVCMD_LOAD_HIGH, + dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR + + 3); + + //Wait on busy + do { + dw_eeprom_busy = + inl(dw_PCIBoardEepromAddress + + AMCC_OP_REG_MCSR); + dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; + } + while (dw_eeprom_busy == EEPROM_BUSY); + + //Load the high address + outb(b_SelectedAddressHigh, + dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR + + 2); + + //Wait on busy + do { + dw_eeprom_busy = + inl(dw_PCIBoardEepromAddress + + AMCC_OP_REG_MCSR); + dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; + } + while (dw_eeprom_busy == EEPROM_BUSY); + + //Select the READ mode + outb(NVCMD_BEGIN_READ, + dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR + + 3); + + //Wait on busy + do { + dw_eeprom_busy = + inl(dw_PCIBoardEepromAddress + + AMCC_OP_REG_MCSR); + dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; + } + while (dw_eeprom_busy == EEPROM_BUSY); + + //Read data into the EEPROM + *pb_ReadByte = + inb(dw_PCIBoardEepromAddress + + AMCC_OP_REG_MCSR + 2); + + //Wait on busy + do { + dw_eeprom_busy = + inl(dw_PCIBoardEepromAddress + + AMCC_OP_REG_MCSR); + dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; + } + while (dw_eeprom_busy == EEPROM_BUSY); + + //Select the upper address part + if (i_Counter == 0) { + b_ReadLowByte = pb_ReadByte[0]; + } else { + b_ReadHighByte = pb_ReadByte[0]; + } + + //Sleep + for (i = 0; i < 10000; i++) ; + + } + w_ReadWord = + (b_ReadLowByte | (((unsigned short)b_ReadHighByte) * + 256)); + + pw_DataRead[i_WordCounter] = w_ReadWord; + + w_EepromStartAddress += 2; // to read the next word + + } // for (...) i_NbOfWordsToRead + return (0); +} + +/*+----------------------------------------------------------------------------+*/ +/*| Function Name : VOID v_GetAPCI3200EepromCalibrationValue (VOID) |*/ +/*+----------------------------------------------------------------------------+*/ +/*| Task : Read calibration value from the APCI-3200 eeprom. |*/ +/*+----------------------------------------------------------------------------+*/ +/*| Input Parameters : - |*/ +/*+----------------------------------------------------------------------------+*/ +/*| Output Parameters : - |*/ +/*+----------------------------------------------------------------------------+*/ +/*| Return Value : - |*/ +/*+----------------------------------------------------------------------------+*/ + +VOID v_GetAPCI3200EepromCalibrationValue(DWORD dw_PCIBoardEepromAddress, + str_BoardInfos * BoardInformations) +{ + WORD w_AnalogInputMainHeaderAddress; + WORD w_AnalogInputComponentAddress; + WORD w_NumberOfModuls = 0; + WORD w_CurrentSources[2]; + WORD w_ModulCounter = 0; + WORD w_FirstHeaderSize = 0; + WORD w_NumberOfInputs = 0; + WORD w_CJCFlag = 0; + WORD w_NumberOfGainValue = 0; + WORD w_SingleHeaderAddress = 0; + WORD w_SingleHeaderSize = 0; + WORD w_Input = 0; + WORD w_GainFactorAddress = 0; + WORD w_GainFactorValue[2]; + WORD w_GainIndex = 0; + WORD w_GainValue = 0; + + /*****************************************/ + /** Get the Analog input header address **/ + /*****************************************/ + i_AddiHeaderRW_ReadEeprom(1, //i_NbOfWordsToRead + dw_PCIBoardEepromAddress, 0x116, //w_EepromStartAddress: Analog input header address + &w_AnalogInputMainHeaderAddress); + + /*******************************************/ + /** Compute the real analog input address **/ + /*******************************************/ + w_AnalogInputMainHeaderAddress = w_AnalogInputMainHeaderAddress + 0x100; + + /******************************/ + /** Get the number of moduls **/ + /******************************/ + i_AddiHeaderRW_ReadEeprom(1, //i_NbOfWordsToRead + dw_PCIBoardEepromAddress, w_AnalogInputMainHeaderAddress + 0x02, //w_EepromStartAddress: Number of conponment + &w_NumberOfModuls); + + for (w_ModulCounter = 0; w_ModulCounter < w_NumberOfModuls; + w_ModulCounter++) { + /***********************************/ + /** Compute the component address **/ + /***********************************/ + w_AnalogInputComponentAddress = + w_AnalogInputMainHeaderAddress + + (w_FirstHeaderSize * w_ModulCounter) + 0x04; + + /****************************/ + /** Read first header size **/ + /****************************/ + i_AddiHeaderRW_ReadEeprom(1, //i_NbOfWordsToRead + dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress, // Address of the first header + &w_FirstHeaderSize); + + w_FirstHeaderSize = w_FirstHeaderSize >> 4; + + /***************************/ + /** Read number of inputs **/ + /***************************/ + i_AddiHeaderRW_ReadEeprom(1, //i_NbOfWordsToRead + dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x06, // Number of inputs for the first modul + &w_NumberOfInputs); + + w_NumberOfInputs = w_NumberOfInputs >> 4; + + /***********************/ + /** Read the CJC flag **/ + /***********************/ + i_AddiHeaderRW_ReadEeprom(1, //i_NbOfWordsToRead + dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x08, // CJC flag + &w_CJCFlag); + + w_CJCFlag = (w_CJCFlag >> 3) & 0x1; // Get only the CJC flag + + /*******************************/ + /** Read number of gain value **/ + /*******************************/ + i_AddiHeaderRW_ReadEeprom(1, //i_NbOfWordsToRead + dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x44, // Number of gain value + &w_NumberOfGainValue); + + w_NumberOfGainValue = w_NumberOfGainValue & 0xFF; + + /***********************************/ + /** Compute single header address **/ + /***********************************/ + w_SingleHeaderAddress = + w_AnalogInputComponentAddress + 0x46 + + (((w_NumberOfGainValue / 16) + 1) * 2) + + (6 * w_NumberOfGainValue) + + (4 * (((w_NumberOfGainValue / 16) + 1) * 2)); + + /********************************************/ + /** Read current sources value for input 1 **/ + /********************************************/ + i_AddiHeaderRW_ReadEeprom(1, //i_NbOfWordsToRead + dw_PCIBoardEepromAddress, w_SingleHeaderAddress, //w_EepromStartAddress: Single header address + &w_SingleHeaderSize); + + w_SingleHeaderSize = w_SingleHeaderSize >> 4; + + /*************************************/ + /** Read gain factor for the module **/ + /*************************************/ + w_GainFactorAddress = w_AnalogInputComponentAddress; + + for (w_GainIndex = 0; w_GainIndex < w_NumberOfGainValue; + w_GainIndex++) { + /************************************/ + /** Read gain value for the module **/ + /************************************/ + i_AddiHeaderRW_ReadEeprom(1, //i_NbOfWordsToRead + dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 70 + (2 * (1 + (w_NumberOfGainValue / 16))) + (0x02 * w_GainIndex), // Gain value + &w_GainValue); + + BoardInformations->s_Module[w_ModulCounter]. + w_GainValue[w_GainIndex] = w_GainValue; + +# ifdef PRINT_INFO + printk("\n Gain value = %d", + BoardInformations->s_Module[w_ModulCounter]. + w_GainValue[w_GainIndex]); +# endif + + /*************************************/ + /** Read gain factor for the module **/ + /*************************************/ + i_AddiHeaderRW_ReadEeprom(2, //i_NbOfWordsToRead + dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 70 + ((2 * w_NumberOfGainValue) + (2 * (1 + (w_NumberOfGainValue / 16)))) + (0x04 * w_GainIndex), // Gain factor + w_GainFactorValue); + + BoardInformations->s_Module[w_ModulCounter]. + ul_GainFactor[w_GainIndex] = + (w_GainFactorValue[1] << 16) + + w_GainFactorValue[0]; + +# ifdef PRINT_INFO + printk("\n w_GainFactorValue [%d] = %lu", w_GainIndex, + BoardInformations->s_Module[w_ModulCounter]. + ul_GainFactor[w_GainIndex]); +# endif + } + + /***************************************************************/ + /** Read current source value for each channels of the module **/ + /***************************************************************/ + for (w_Input = 0; w_Input < w_NumberOfInputs; w_Input++) { + /********************************************/ + /** Read current sources value for input 1 **/ + /********************************************/ + i_AddiHeaderRW_ReadEeprom(2, //i_NbOfWordsToRead + dw_PCIBoardEepromAddress, + (w_Input * w_SingleHeaderSize) + + w_SingleHeaderAddress + 0x0C, w_CurrentSources); + + /************************************/ + /** Save the current sources value **/ + /************************************/ + BoardInformations->s_Module[w_ModulCounter]. + ul_CurrentSource[w_Input] = + (w_CurrentSources[0] + + ((w_CurrentSources[1] & 0xFFF) << 16)); + +# ifdef PRINT_INFO + printk("\n Current sources [%d] = %lu", w_Input, + BoardInformations->s_Module[w_ModulCounter]. + ul_CurrentSource[w_Input]); +# endif + } + + /***************************************/ + /** Read the CJC current source value **/ + /***************************************/ + i_AddiHeaderRW_ReadEeprom(2, //i_NbOfWordsToRead + dw_PCIBoardEepromAddress, + (w_Input * w_SingleHeaderSize) + w_SingleHeaderAddress + + 0x0C, w_CurrentSources); + + /************************************/ + /** Save the current sources value **/ + /************************************/ + BoardInformations->s_Module[w_ModulCounter]. + ul_CurrentSourceCJC = + (w_CurrentSources[0] + + ((w_CurrentSources[1] & 0xFFF) << 16)); + +# ifdef PRINT_INFO + printk("\n Current sources CJC = %lu", + BoardInformations->s_Module[w_ModulCounter]. + ul_CurrentSourceCJC); +# endif + } +} + +INT i_APCI3200_GetChannelCalibrationValue(comedi_device * dev, + unsigned int ui_Channel_num, lsampl_t * CJCCurrentSource, + lsampl_t * ChannelCurrentSource, lsampl_t * ChannelGainFactor) +{ + int i_DiffChannel = 0; + int i_Module = 0; + +#ifdef PRINT_INFO + printk("\n Channel = %u", ui_Channel_num); +#endif + + //Test if single or differential mode + if (s_BoardInfos[dev->minor].i_ConnectionType == 1) { + //if diff + + if ((ui_Channel_num >= 0) && (ui_Channel_num <= 1)) + i_DiffChannel = ui_Channel_num, i_Module = 0; + else if ((ui_Channel_num >= 2) && (ui_Channel_num <= 3)) + i_DiffChannel = ui_Channel_num - 2, i_Module = 1; + else if ((ui_Channel_num >= 4) && (ui_Channel_num <= 5)) + i_DiffChannel = ui_Channel_num - 4, i_Module = 2; + else if ((ui_Channel_num >= 6) && (ui_Channel_num <= 7)) + i_DiffChannel = ui_Channel_num - 6, i_Module = 3; + + } else { + // if single + if ((ui_Channel_num == 0) || (ui_Channel_num == 1)) + i_DiffChannel = 0, i_Module = 0; + else if ((ui_Channel_num == 2) || (ui_Channel_num == 3)) + i_DiffChannel = 1, i_Module = 0; + else if ((ui_Channel_num == 4) || (ui_Channel_num == 5)) + i_DiffChannel = 0, i_Module = 1; + else if ((ui_Channel_num == 6) || (ui_Channel_num == 7)) + i_DiffChannel = 1, i_Module = 1; + else if ((ui_Channel_num == 8) || (ui_Channel_num == 9)) + i_DiffChannel = 0, i_Module = 2; + else if ((ui_Channel_num == 10) || (ui_Channel_num == 11)) + i_DiffChannel = 1, i_Module = 2; + else if ((ui_Channel_num == 12) || (ui_Channel_num == 13)) + i_DiffChannel = 0, i_Module = 3; + else if ((ui_Channel_num == 14) || (ui_Channel_num == 15)) + i_DiffChannel = 1, i_Module = 3; + } + + //Test if thermocouple or RTD mode + *CJCCurrentSource = + s_BoardInfos[dev->minor].s_Module[i_Module].ul_CurrentSourceCJC; +#ifdef PRINT_INFO + printk("\n CJCCurrentSource = %lu", *CJCCurrentSource); +#endif + + *ChannelCurrentSource = + s_BoardInfos[dev->minor].s_Module[i_Module]. + ul_CurrentSource[i_DiffChannel]; +#ifdef PRINT_INFO + printk("\n ChannelCurrentSource = %lu", *ChannelCurrentSource); +#endif + // } + // } + + //Channle gain factor + *ChannelGainFactor = + s_BoardInfos[dev->minor].s_Module[i_Module]. + ul_GainFactor[s_BoardInfos[dev->minor].i_ADDIDATAGain]; +#ifdef PRINT_INFO + printk("\n ChannelGainFactor = %lu", *ChannelGainFactor); +#endif + //End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + + return (0); +} + +//End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + +/* + +----------------------------------------------------------------------------+ + | Function Name : int i_APCI3200_ReadDigitalInput | + | (comedi_device *dev,comedi_subdevice *s, | + | comedi_insn *insn,lsampl_t *data) | + +----------------------------------------------------------------------------+ + | Task : Read value of the selected channel or port | + +----------------------------------------------------------------------------+ + | Input Parameters : comedi_device *dev : Driver handle | + | UINT ui_NoOfChannels : No Of Channels To read for Port + Channel Numberfor single channel + | UINT data[0] : 0: Read single channel + 1: Read port value + data[1] Port number + +----------------------------------------------------------------------------+ + | Output Parameters : -- data[0] :Read status value + +----------------------------------------------------------------------------+ + | Return Value : TRUE : No error occur | + | : FALSE : Error occur. Return the error | + | | + +----------------------------------------------------------------------------+ +*/ + +INT i_APCI3200_ReadDigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_Temp = 0; + UINT ui_NoOfChannel = 0; + ui_NoOfChannel = CR_CHAN(insn->chanspec); + ui_Temp = data[0]; + *data = inl(devpriv->i_IobaseReserved); + + if (ui_Temp == 0) { + *data = (*data >> ui_NoOfChannel) & 0x1; + } //if (ui_Temp==0) + else { + if (ui_Temp == 1) { + if (data[1] < 0 || data[1] > 1) { + printk("\nThe port number is in error\n"); + return -EINVAL; + } //if(data[1] < 0 || data[1] >1) + switch (ui_NoOfChannel) { + + case 2: + *data = (*data >> (2 * data[1])) & 0x3; + break; + case 3: + *data = (*data & 15); + break; + default: + comedi_error(dev, " chan spec wrong"); + return -EINVAL; // "sorry channel spec wrong " + + } //switch(ui_NoOfChannels) + } //if (ui_Temp==1) + else { + printk("\nSpecified channel not supported \n"); + } //elseif (ui_Temp==1) + } + return insn->n; +} + +/* + +----------------------------------------------------------------------------+ + | Function Name : int i_APCI3200_ConfigDigitalOutput | + | (comedi_device *dev,comedi_subdevice *s, | + | comedi_insn *insn,lsampl_t *data) | + +----------------------------------------------------------------------------+ + | Task : Configures The Digital Output Subdevice. | + +----------------------------------------------------------------------------+ + | Input Parameters : comedi_device *dev : Driver handle | + | data[0] :1 Memory enable + 0 Memory Disable + +----------------------------------------------------------------------------+ + | Output Parameters : -- | + +----------------------------------------------------------------------------+ + | Return Value : TRUE : No error occur | + | : FALSE : Error occur. Return the error | + | | + +----------------------------------------------------------------------------+ +*/ +int i_APCI3200_ConfigDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + + if ((data[0] != 0) && (data[0] != 1)) { + comedi_error(dev, + "Not a valid Data !!! ,Data should be 1 or 0\n"); + return -EINVAL; + } //if ( (data[0]!=0) && (data[0]!=1) ) + if (data[0]) { + devpriv->b_OutputMemoryStatus = ADDIDATA_ENABLE; + } // if (data[0]) + else { + devpriv->b_OutputMemoryStatus = ADDIDATA_DISABLE; + } //else if (data[0]) + return insn->n; +} + +/* + +----------------------------------------------------------------------------+ + | Function Name : int i_APCI3200_WriteDigitalOutput | + | (comedi_device *dev,comedi_subdevice *s, | + | comedi_insn *insn,lsampl_t *data) | + +----------------------------------------------------------------------------+ + | Task : writes To the digital Output Subdevice | + +----------------------------------------------------------------------------+ + | Input Parameters : comedi_device *dev : Driver handle | + | comedi_subdevice *s : Subdevice Pointer | + | comedi_insn *insn : Insn Structure Pointer | + | lsampl_t *data : Data Pointer contains | + | configuration parameters as below | + | data[0] :Value to output + data[1] : 0 o/p single channel + 1 o/p port + data[2] : port no + data[3] :0 set the digital o/p on + 1 set the digital o/p off + +----------------------------------------------------------------------------+ + | Output Parameters : -- | + +----------------------------------------------------------------------------+ + | Return Value : TRUE : No error occur | + | : FALSE : Error occur. Return the error | + | | + +----------------------------------------------------------------------------+ +*/ +INT i_APCI3200_WriteDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_Temp = 0, ui_Temp1 = 0; + UINT ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel + if (devpriv->b_OutputMemoryStatus) { + ui_Temp = inl(devpriv->i_IobaseAddon); + + } //if(devpriv->b_OutputMemoryStatus ) + else { + ui_Temp = 0; + } //if(devpriv->b_OutputMemoryStatus ) + if (data[3] == 0) { + if (data[1] == 0) { + data[0] = (data[0] << ui_NoOfChannel) | ui_Temp; + outl(data[0], devpriv->i_IobaseAddon); + } //if(data[1]==0) + else { + if (data[1] == 1) { + switch (ui_NoOfChannel) { + + case 2: + data[0] = + (data[0] << (2 * + data[2])) | ui_Temp; + break; + case 3: + data[0] = (data[0] | ui_Temp); + break; + } //switch(ui_NoOfChannels) + + outl(data[0], devpriv->i_IobaseAddon); + } // if(data[1]==1) + else { + printk("\nSpecified channel not supported\n"); + } //else if(data[1]==1) + } //elseif(data[1]==0) + } //if(data[3]==0) + else { + if (data[3] == 1) { + if (data[1] == 0) { + data[0] = ~data[0] & 0x1; + ui_Temp1 = 1; + ui_Temp1 = ui_Temp1 << ui_NoOfChannel; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = (data[0] << ui_NoOfChannel) ^ 0xf; + data[0] = data[0] & ui_Temp; + outl(data[0], devpriv->i_IobaseAddon); + } //if(data[1]==0) + else { + if (data[1] == 1) { + switch (ui_NoOfChannel) { + + case 2: + data[0] = ~data[0] & 0x3; + ui_Temp1 = 3; + ui_Temp1 = + ui_Temp1 << 2 * data[2]; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = + ((data[0] << (2 * + data + [2])) ^ + 0xf) & ui_Temp; + + break; + case 3: + break; + + default: + comedi_error(dev, + " chan spec wrong"); + return -EINVAL; // "sorry channel spec wrong " + } //switch(ui_NoOfChannels) + + outl(data[0], devpriv->i_IobaseAddon); + } // if(data[1]==1) + else { + printk("\nSpecified channel not supported\n"); + } //else if(data[1]==1) + } //elseif(data[1]==0) + } //if(data[3]==1); + else { + printk("\nSpecified functionality does not exist\n"); + return -EINVAL; + } //if else data[3]==1) + } //if else data[3]==0) + return insn->n; +} + +/* + +----------------------------------------------------------------------------+ + | Function Name : int i_APCI3200_ReadDigitalOutput | + | (comedi_device *dev,comedi_subdevice *s, | + | comedi_insn *insn,lsampl_t *data) | + +----------------------------------------------------------------------------+ + | Task : Read value of the selected channel or port | + +----------------------------------------------------------------------------+ + | Input Parameters : comedi_device *dev : Driver handle | + | UINT ui_NoOfChannels : No Of Channels To read | + | UINT *data : Data Pointer to read status | + data[0] :0 read single channel + 1 read port value + data[1] port no + + +----------------------------------------------------------------------------+ + | Output Parameters : -- | + +----------------------------------------------------------------------------+ + | Return Value : TRUE : No error occur | + | : FALSE : Error occur. Return the error | + | | + +----------------------------------------------------------------------------+ +*/ +INT i_APCI3200_ReadDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_Temp; + UINT ui_NoOfChannel; + ui_NoOfChannel = CR_CHAN(insn->chanspec); + ui_Temp = data[0]; + *data = inl(devpriv->i_IobaseAddon); + if (ui_Temp == 0) { + *data = (*data >> ui_NoOfChannel) & 0x1; + } // if (ui_Temp==0) + else { + if (ui_Temp == 1) { + if (data[1] < 0 || data[1] > 1) { + printk("\nThe port selection is in error\n"); + return -EINVAL; + } //if(data[1] <0 ||data[1] >1) + switch (ui_NoOfChannel) { + case 2: + *data = (*data >> (2 * data[1])) & 3; + break; + + case 3: + break; + + default: + comedi_error(dev, " chan spec wrong"); + return -EINVAL; // "sorry channel spec wrong " + break; + } // switch(ui_NoOfChannels) + } // if (ui_Temp==1) + else { + printk("\nSpecified channel not supported \n"); + } // else if (ui_Temp==1) + } // else if (ui_Temp==0) + return insn->n; +} + +/* + +----------------------------------------------------------------------------+ + | Function Name : INT i_APCI3200_ConfigAnalogInput | + | (comedi_device *dev,comedi_subdevice *s, | + | comedi_insn *insn,lsampl_t *data) | + +----------------------------------------------------------------------------+ + | Task : Configures The Analog Input Subdevice | + +----------------------------------------------------------------------------+ + | Input Parameters : comedi_device *dev : Driver handle | + | comedi_subdevice *s : Subdevice Pointer | + | comedi_insn *insn : Insn Structure Pointer | + | lsampl_t *data : Data Pointer contains | + | configuration parameters as below | + | | + | data[0] + | 0:Normal AI | + | 1:RTD | + | 2:THERMOCOUPLE | + | data[1] : Gain To Use | + | | + | data[2] : Polarity + | 0:Bipolar | + | 1:Unipolar | + | | + | data[3] : Offset Range + | | + | data[4] : Coupling + | 0:DC Coupling | + | 1:AC Coupling | + | | + | data[5] :Differential/Single + | 0:Single | + | 1:Differential | + | | + | data[6] :TimerReloadValue + | | + | data[7] :ConvertingTimeUnit + | | + | data[8] :0 Analog voltage measurement + 1 Resistance measurement + 2 Temperature measurement + | data[9] :Interrupt + | 0:Disable + | 1:Enable + data[10] :Type of Thermocouple + | data[11] : 0: single channel + Module Number + | + | data[12] + | 0:Single Read + | 1:Read more channel + 2:Single scan + | 3:Continous Scan + data[13] :Number of channels to read + | data[14] :RTD connection type + :0:RTD not used + 1:RTD 2 wire connection + 2:RTD 3 wire connection + 3:RTD 4 wire connection + | | + | | + | | + +----------------------------------------------------------------------------+ + | Output Parameters : -- | + +----------------------------------------------------------------------------+ + | Return Value : TRUE : No error occur | + | : FALSE : Error occur. Return the error | + | | + +----------------------------------------------------------------------------+ +*/ +INT i_APCI3200_ConfigAnalogInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + + UINT ul_Config = 0, ul_Temp = 0; + UINT ui_ChannelNo = 0; + UINT ui_Dummy = 0; + INT i_err = 0; + + //Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + +#ifdef PRINT_INFO + INT i = 0, i2 = 0; +#endif + //End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + + //BEGIN JK 06.07.04: Management of sevrals boards + // Initialize the structure + if (s_BoardInfos[dev->minor].b_StructInitialized != 1) { + s_BoardInfos[dev->minor].i_CJCAvailable = 1; + s_BoardInfos[dev->minor].i_CJCPolarity = 0; + s_BoardInfos[dev->minor].i_CJCGain = 2; //changed from 0 to 2 + s_BoardInfos[dev->minor].i_InterruptFlag = 0; + s_BoardInfos[dev->minor].i_AutoCalibration = 0; //: auto calibration + s_BoardInfos[dev->minor].i_ChannelCount = 0; + s_BoardInfos[dev->minor].i_Sum = 0; + s_BoardInfos[dev->minor].ui_Channel_num = 0; + s_BoardInfos[dev->minor].i_Count = 0; + s_BoardInfos[dev->minor].i_Initialised = 0; + s_BoardInfos[dev->minor].b_StructInitialized = 1; + + //Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + s_BoardInfos[dev->minor].i_ConnectionType = 0; + //End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + + //Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + memset(s_BoardInfos[dev->minor].s_Module, 0, + sizeof(s_BoardInfos[dev->minor].s_Module[MAX_MODULE])); + + v_GetAPCI3200EepromCalibrationValue(devpriv->i_IobaseAmcc, + &s_BoardInfos[dev->minor]); + +#ifdef PRINT_INFO + for (i = 0; i < MAX_MODULE; i++) { + printk("\n s_Module[%i].ul_CurrentSourceCJC = %lu", i, + s_BoardInfos[dev->minor].s_Module[i]. + ul_CurrentSourceCJC); + + for (i2 = 0; i2 < 5; i2++) { + printk("\n s_Module[%i].ul_CurrentSource [%i] = %lu", i, i2, s_BoardInfos[dev->minor].s_Module[i].ul_CurrentSource[i2]); + } + + for (i2 = 0; i2 < 8; i2++) { + printk("\n s_Module[%i].ul_GainFactor [%i] = %lu", i, i2, s_BoardInfos[dev->minor].s_Module[i].ul_GainFactor[i2]); + } + + for (i2 = 0; i2 < 8; i2++) { + printk("\n s_Module[%i].w_GainValue [%i] = %u", + i, i2, + s_BoardInfos[dev->minor].s_Module[i]. + w_GainValue[i2]); + } + } +#endif + //End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + } + + if (data[0] != 0 && data[0] != 1 && data[0] != 2) { + printk("\nThe selection of acquisition type is in error\n"); + i_err++; + } //if(data[0]!=0 && data[0]!=1 && data[0]!=2) + if (data[0] == 1) { + if (data[14] != 0 && data[14] != 1 && data[14] != 2 + && data[14] != 4) { + printk("\n Error in selection of RTD connection type\n"); + i_err++; + } //if(data[14]!=0 && data[14]!=1 && data[14]!=2 && data[14]!=4) + } //if(data[0]==1 ) + if (data[1] < 0 || data[1] > 7) { + printk("\nThe selection of gain is in error\n"); + i_err++; + } // if(data[1]<0 || data[1]>7) + if (data[2] != 0 && data[2] != 1) { + printk("\nThe selection of polarity is in error\n"); + i_err++; + } //if(data[2]!=0 && data[2]!=1) + if (data[3] != 0) { + printk("\nThe selection of offset range is in error\n"); + i_err++; + } // if(data[3]!=0) + if (data[4] != 0 && data[4] != 1) { + printk("\nThe selection of coupling is in error\n"); + i_err++; + } //if(data[4]!=0 && data[4]!=1) + if (data[5] != 0 && data[5] != 1) { + printk("\nThe selection of single/differential mode is in error\n"); + i_err++; + } //if(data[5]!=0 && data[5]!=1) + if (data[8] != 0 && data[8] != 1 && data[2] != 2) { + printk("\nError in selection of functionality\n"); + } //if(data[8]!=0 && data[8]!=1 && data[2]!=2) + if (data[12] == 0 || data[12] == 1) { + if (data[6] != 20 && data[6] != 40 && data[6] != 80 + && data[6] != 160) { + printk("\nThe selection of conversion time reload value is in error\n"); + i_err++; + } // if (data[6]!=20 && data[6]!=40 && data[6]!=80 && data[6]!=160 ) + if (data[7] != 2) { + printk("\nThe selection of conversion time unit is in error\n"); + i_err++; + } // if(data[7]!=2) + } + if (data[9] != 0 && data[9] != 1) { + printk("\nThe selection of interrupt enable is in error\n"); + i_err++; + } //if(data[9]!=0 && data[9]!=1) + if (data[11] < 0 || data[11] > 4) { + printk("\nThe selection of module is in error\n"); + i_err++; + } //if(data[11] <0 || data[11]>1) + if (data[12] < 0 || data[12] > 3) { + printk("\nThe selection of singlechannel/scan selection is in error\n"); + i_err++; + } //if(data[12] < 0 || data[12]> 3) + if (data[13] < 0 || data[13] > 16) { + printk("\nThe selection of number of channels is in error\n"); + i_err++; + } // if(data[13] <0 ||data[13] >15) + + //BEGIN JK 06.07.04: Management of sevrals boards + /* + i_ChannelCount=data[13]; + i_ScanType=data[12]; + i_ADDIDATAPolarity = data[2]; + i_ADDIDATAGain=data[1]; + i_ADDIDATAConversionTime=data[6]; + i_ADDIDATAConversionTimeUnit=data[7]; + i_ADDIDATAType=data[0]; + */ + + // Save acquisition configuration for the actual board + s_BoardInfos[dev->minor].i_ChannelCount = data[13]; + s_BoardInfos[dev->minor].i_ScanType = data[12]; + s_BoardInfos[dev->minor].i_ADDIDATAPolarity = data[2]; + s_BoardInfos[dev->minor].i_ADDIDATAGain = data[1]; + s_BoardInfos[dev->minor].i_ADDIDATAConversionTime = data[6]; + s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit = data[7]; + s_BoardInfos[dev->minor].i_ADDIDATAType = data[0]; + //Begin JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 + s_BoardInfos[dev->minor].i_ConnectionType = data[5]; + //End JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 + //END JK 06.07.04: Management of sevrals boards + + //Begin JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 + memset(s_BoardInfos[dev->minor].ui_ScanValueArray, 0, (7 + 12) * sizeof(lsampl_t)); // 7 is the maximal number of channels + //End JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 + + //BEGIN JK 02.07.04 : This while can't be do, it block the process when using severals boards + //while(i_InterruptFlag==1) + while (s_BoardInfos[dev->minor].i_InterruptFlag == 1) { +#ifndef MSXBOX + udelay(1); +#else + // In the case where the driver is compiled for the MSX-Box + // we used a printk to have a little delay because udelay + // seems to be broken under the MSX-Box. + // This solution hat to be studied. + printk(""); +#endif + } + //END JK 02.07.04 : This while can't be do, it block the process when using severals boards + + ui_ChannelNo = CR_CHAN(insn->chanspec); // get the channel + //BEGIN JK 06.07.04: Management of sevrals boards + //i_ChannelNo=ui_ChannelNo; + //ui_Channel_num =ui_ChannelNo; + + s_BoardInfos[dev->minor].i_ChannelNo = ui_ChannelNo; + s_BoardInfos[dev->minor].ui_Channel_num = ui_ChannelNo; + + //END JK 06.07.04: Management of sevrals boards + + if (data[5] == 0) { + if (ui_ChannelNo < 0 || ui_ChannelNo > 15) { + printk("\nThe Selection of the channel is in error\n"); + i_err++; + } // if(ui_ChannelNo<0 || ui_ChannelNo>15) + } //if(data[5]==0) + else { + if (data[14] == 2) { + if (ui_ChannelNo < 0 || ui_ChannelNo > 3) { + printk("\nThe Selection of the channel is in error\n"); + i_err++; + } // if(ui_ChannelNo<0 || ui_ChannelNo>3) + } //if(data[14]==2) + else { + if (ui_ChannelNo < 0 || ui_ChannelNo > 7) { + printk("\nThe Selection of the channel is in error\n"); + i_err++; + } // if(ui_ChannelNo<0 || ui_ChannelNo>7) + } //elseif(data[14]==2) + } //elseif(data[5]==0) + if (data[12] == 0 || data[12] == 1) { + switch (data[5]) { + case 0: + if (ui_ChannelNo >= 0 && ui_ChannelNo <= 3) { + //BEGIN JK 06.07.04: Management of sevrals boards + //i_Offset=0; + s_BoardInfos[dev->minor].i_Offset = 0; + //END JK 06.07.04: Management of sevrals boards + } //if(ui_ChannelNo >=0 && ui_ChannelNo <=3) + if (ui_ChannelNo >= 4 && ui_ChannelNo <= 7) { + //BEGIN JK 06.07.04: Management of sevrals boards + //i_Offset=64; + s_BoardInfos[dev->minor].i_Offset = 64; + //END JK 06.07.04: Management of sevrals boards + } //if(ui_ChannelNo >=4 && ui_ChannelNo <=7) + if (ui_ChannelNo >= 8 && ui_ChannelNo <= 11) { + //BEGIN JK 06.07.04: Management of sevrals boards + //i_Offset=128; + s_BoardInfos[dev->minor].i_Offset = 128; + //END JK 06.07.04: Management of sevrals boards + } //if(ui_ChannelNo >=8 && ui_ChannelNo <=11) + if (ui_ChannelNo >= 12 && ui_ChannelNo <= 15) { + //BEGIN JK 06.07.04: Management of sevrals boards + //i_Offset=192; + s_BoardInfos[dev->minor].i_Offset = 192; + //END JK 06.07.04: Management of sevrals boards + } //if(ui_ChannelNo >=12 && ui_ChannelNo <=15) + break; + case 1: + if (data[14] == 2) { + if (ui_ChannelNo == 0) { + //BEGIN JK 06.07.04: Management of sevrals boards + //i_Offset=0; + s_BoardInfos[dev->minor].i_Offset = 0; + //END JK 06.07.04: Management of sevrals boards + } //if(ui_ChannelNo ==0 ) + if (ui_ChannelNo == 1) { + //BEGIN JK 06.07.04: Management of sevrals boards + //i_Offset=0; + s_BoardInfos[dev->minor].i_Offset = 64; + //END JK 06.07.04: Management of sevrals boards + } // if(ui_ChannelNo ==1) + if (ui_ChannelNo == 2) { + //BEGIN JK 06.07.04: Management of sevrals boards + //i_Offset=128; + s_BoardInfos[dev->minor].i_Offset = 128; + //END JK 06.07.04: Management of sevrals boards + } //if(ui_ChannelNo ==2 ) + if (ui_ChannelNo == 3) { + //BEGIN JK 06.07.04: Management of sevrals boards + //i_Offset=192; + s_BoardInfos[dev->minor].i_Offset = 192; + //END JK 06.07.04: Management of sevrals boards + } //if(ui_ChannelNo ==3) + + //BEGIN JK 06.07.04: Management of sevrals boards + //i_ChannelNo=0; + s_BoardInfos[dev->minor].i_ChannelNo = 0; + //END JK 06.07.04: Management of sevrals boards + ui_ChannelNo = 0; + break; + } //if(data[14]==2) + if (ui_ChannelNo >= 0 && ui_ChannelNo <= 1) { + //BEGIN JK 06.07.04: Management of sevrals boards + //i_Offset=0; + s_BoardInfos[dev->minor].i_Offset = 0; + //END JK 06.07.04: Management of sevrals boards + } //if(ui_ChannelNo >=0 && ui_ChannelNo <=1) + if (ui_ChannelNo >= 2 && ui_ChannelNo <= 3) { + //BEGIN JK 06.07.04: Management of sevrals boards + //i_ChannelNo=i_ChannelNo-2; + //i_Offset=64; + s_BoardInfos[dev->minor].i_ChannelNo = + s_BoardInfos[dev->minor].i_ChannelNo - + 2; + s_BoardInfos[dev->minor].i_Offset = 64; + //END JK 06.07.04: Management of sevrals boards + ui_ChannelNo = ui_ChannelNo - 2; + } //if(ui_ChannelNo >=2 && ui_ChannelNo <=3) + if (ui_ChannelNo >= 4 && ui_ChannelNo <= 5) { + //BEGIN JK 06.07.04: Management of sevrals boards + //i_ChannelNo=i_ChannelNo-4; + //i_Offset=128; + s_BoardInfos[dev->minor].i_ChannelNo = + s_BoardInfos[dev->minor].i_ChannelNo - + 4; + s_BoardInfos[dev->minor].i_Offset = 128; + //END JK 06.07.04: Management of sevrals boards + ui_ChannelNo = ui_ChannelNo - 4; + } //if(ui_ChannelNo >=4 && ui_ChannelNo <=5) + if (ui_ChannelNo >= 6 && ui_ChannelNo <= 7) { + //BEGIN JK 06.07.04: Management of sevrals boards + //i_ChannelNo=i_ChannelNo-6; + //i_Offset=192; + s_BoardInfos[dev->minor].i_ChannelNo = + s_BoardInfos[dev->minor].i_ChannelNo - + 6; + s_BoardInfos[dev->minor].i_Offset = 192; + //END JK 06.07.04: Management of sevrals boards + ui_ChannelNo = ui_ChannelNo - 6; + } //if(ui_ChannelNo >=6 && ui_ChannelNo <=7) + break; + + default: + printk("\n This selection of polarity does not exist\n"); + i_err++; + } //switch(data[2]) + } //if(data[12]==0 || data[12]==1) + else { + switch (data[11]) { + case 1: + //BEGIN JK 06.07.04: Management of sevrals boards + //i_Offset=0; + s_BoardInfos[dev->minor].i_Offset = 0; + //END JK 06.07.04: Management of sevrals boards + break; + case 2: + //BEGIN JK 06.07.04: Management of sevrals boards + //i_Offset=64; + s_BoardInfos[dev->minor].i_Offset = 64; + //END JK 06.07.04: Management of sevrals boards + break; + case 3: + //BEGIN JK 06.07.04: Management of sevrals boards + //i_Offset=128; + s_BoardInfos[dev->minor].i_Offset = 128; + //END JK 06.07.04: Management of sevrals boards + break; + case 4: + //BEGIN JK 06.07.04: Management of sevrals boards + //i_Offset=192; + s_BoardInfos[dev->minor].i_Offset = 192; + //END JK 06.07.04: Management of sevrals boards + break; + default: + printk("\nError in module selection\n"); + i_err++; + } // switch(data[11]) + } // elseif(data[12]==0 || data[12]==1) + if (i_err) { + i_APCI3200_Reset(dev); + return -EINVAL; + } + //if(i_ScanType!=1) + if (s_BoardInfos[dev->minor].i_ScanType != 1) { + //BEGIN JK 06.07.04: Management of sevrals boards + //i_Count=0; + //i_Sum=0; + s_BoardInfos[dev->minor].i_Count = 0; + s_BoardInfos[dev->minor].i_Sum = 0; + //END JK 06.07.04: Management of sevrals boards + } //if(i_ScanType!=1) + + ul_Config = + data[1] | (data[2] << 6) | (data[5] << 7) | (data[3] << 8) | + (data[4] << 9); + //BEGIN JK 06.07.04: Management of sevrals boards + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //END JK 06.07.04: Management of sevrals boards + /*********************************/ + /* Write the channel to configure */ + /*********************************/ + //BEGIN JK 06.07.04: Management of sevrals boards + //outl(0 | ui_ChannelNo , devpriv->iobase+i_Offset + 0x4); + outl(0 | ui_ChannelNo, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x4); + //END JK 06.07.04: Management of sevrals boards + + //BEGIN JK 06.07.04: Management of sevrals boards + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //END JK 06.07.04: Management of sevrals boards + /**************************/ + /* Reset the configuration */ + /**************************/ + //BEGIN JK 06.07.04: Management of sevrals boards + //outl(0 , devpriv->iobase+i_Offset + 0x0); + outl(0, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x0); + //END JK 06.07.04: Management of sevrals boards + + //BEGIN JK 06.07.04: Management of sevrals boards + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //END JK 06.07.04: Management of sevrals boards + + /***************************/ + /* Write the configuration */ + /***************************/ + //BEGIN JK 06.07.04: Management of sevrals boards + //outl(ul_Config , devpriv->iobase+i_Offset + 0x0); + outl(ul_Config, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x0); + //END JK 06.07.04: Management of sevrals boards + + /***************************/ + /*Reset the calibration bit */ + /***************************/ + //BEGIN JK 06.07.04: Management of sevrals boards + //ul_Temp = inl(devpriv->iobase+i_Offset + 12); + ul_Temp = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); + //END JK 06.07.04: Management of sevrals boards + + //BEGIN JK 06.07.04: Management of sevrals boards + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //END JK 06.07.04: Management of sevrals boards + + //BEGIN JK 06.07.04: Management of sevrals boards + //outl((ul_Temp & 0xFFF9FFFF) , devpriv->iobase+.i_Offset + 12); + outl((ul_Temp & 0xFFF9FFFF), + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); + //END JK 06.07.04: Management of sevrals boards + + if (data[9] == 1) { + devpriv->tsk_Current = current; + //BEGIN JK 06.07.04: Management of sevrals boards + //i_InterruptFlag=1; + s_BoardInfos[dev->minor].i_InterruptFlag = 1; + //END JK 06.07.04: Management of sevrals boards + } // if(data[9]==1) + else { + //BEGIN JK 06.07.04: Management of sevrals boards + //i_InterruptFlag=0; + s_BoardInfos[dev->minor].i_InterruptFlag = 0; + //END JK 06.07.04: Management of sevrals boards + } //else if(data[9]==1) + + //BEGIN JK 06.07.04: Management of sevrals boards + //i_Initialised=1; + s_BoardInfos[dev->minor].i_Initialised = 1; + //END JK 06.07.04: Management of sevrals boards + + //BEGIN JK 06.07.04: Management of sevrals boards + //if(i_ScanType==1) + if (s_BoardInfos[dev->minor].i_ScanType == 1) + //END JK 06.07.04: Management of sevrals boards + { + //BEGIN JK 06.07.04: Management of sevrals boards + //i_Sum=i_Sum+1; + s_BoardInfos[dev->minor].i_Sum = + s_BoardInfos[dev->minor].i_Sum + 1; + //END JK 06.07.04: Management of sevrals boards + + insn->unused[0] = 0; + i_APCI3200_ReadAnalogInput(dev, s, insn, &ui_Dummy); + } + + return insn->n; +} + +/* + +----------------------------------------------------------------------------+ + | Function Name : int i_APCI3200_ReadAnalogInput | + | (comedi_device *dev,comedi_subdevice *s, | + | comedi_insn *insn,lsampl_t *data) | + +----------------------------------------------------------------------------+ + | Task : Read value of the selected channel | + +----------------------------------------------------------------------------+ + | Input Parameters : comedi_device *dev : Driver handle | + | UINT ui_NoOfChannels : No Of Channels To read | + | UINT *data : Data Pointer to read status | + +----------------------------------------------------------------------------+ + | Output Parameters : -- | + | data[0] : Digital Value Of Input | + | data[1] : Calibration Offset Value | + | data[2] : Calibration Gain Value + | data[3] : CJC value + | data[4] : CJC offset value + | data[5] : CJC gain value + | Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + | data[6] : CJC current source from eeprom + | data[7] : Channel current source from eeprom + | data[8] : Channle gain factor from eeprom + | End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + +----------------------------------------------------------------------------+ + | Return Value : TRUE : No error occur | + | : FALSE : Error occur. Return the error | + | | + +----------------------------------------------------------------------------+ +*/ +INT i_APCI3200_ReadAnalogInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_DummyValue = 0; + int i_ConvertCJCCalibration; + int i = 0; + + //BEGIN JK 06.07.04: Management of sevrals boards + //if(i_Initialised==0) + if (s_BoardInfos[dev->minor].i_Initialised == 0) + //END JK 06.07.04: Management of sevrals boards + { + i_APCI3200_Reset(dev); + return -EINVAL; + } //if(i_Initialised==0); + +#ifdef PRINT_INFO + printk("\n insn->unused[0] = %i", insn->unused[0]); +#endif + + switch (insn->unused[0]) { + case 0: + + i_APCI3200_Read1AnalogInputChannel(dev, s, insn, + &ui_DummyValue); + //BEGIN JK 06.07.04: Management of sevrals boards + //ui_InterruptChannelValue[i_Count+0]=ui_DummyValue; + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue[s_BoardInfos[dev->minor]. + i_Count + 0] = ui_DummyValue; + //END JK 06.07.04: Management of sevrals boards + + //Begin JK 25.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + i_APCI3200_GetChannelCalibrationValue(dev, + s_BoardInfos[dev->minor].ui_Channel_num, + &s_BoardInfos[dev->minor]. + ui_InterruptChannelValue[s_BoardInfos[dev->minor]. + i_Count + 6], + &s_BoardInfos[dev->minor]. + ui_InterruptChannelValue[s_BoardInfos[dev->minor]. + i_Count + 7], + &s_BoardInfos[dev->minor]. + ui_InterruptChannelValue[s_BoardInfos[dev->minor]. + i_Count + 8]); + +#ifdef PRINT_INFO + printk("\n s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count+6] = %lu", s_BoardInfos[dev->minor].ui_InterruptChannelValue[s_BoardInfos[dev->minor].i_Count + 6]); + + printk("\n s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count+7] = %lu", s_BoardInfos[dev->minor].ui_InterruptChannelValue[s_BoardInfos[dev->minor].i_Count + 7]); + + printk("\n s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count+8] = %lu", s_BoardInfos[dev->minor].ui_InterruptChannelValue[s_BoardInfos[dev->minor].i_Count + 8]); +#endif + + //End JK 25.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + + //BEGIN JK 06.07.04: Management of sevrals boards + //if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE) && (i_CJCAvailable==1)) + if ((s_BoardInfos[dev->minor].i_ADDIDATAType == 2) + && (s_BoardInfos[dev->minor].i_InterruptFlag == FALSE) + && (s_BoardInfos[dev->minor].i_CJCAvailable == 1)) + //END JK 06.07.04: Management of sevrals boards + { + i_APCI3200_ReadCJCValue(dev, &ui_DummyValue); + //BEGIN JK 06.07.04: Management of sevrals boards + //ui_InterruptChannelValue[i_Count + 3]=ui_DummyValue; + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue[s_BoardInfos[dev-> + minor].i_Count + 3] = ui_DummyValue; + //END JK 06.07.04: Management of sevrals boards + } //if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)) + else { + //BEGIN JK 06.07.04: Management of sevrals boards + //ui_InterruptChannelValue[i_Count + 3]=0; + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue[s_BoardInfos[dev-> + minor].i_Count + 3] = 0; + //END JK 06.07.04: Management of sevrals boards + } //elseif((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE) && (i_CJCAvailable==1)) + + //BEGIN JK 06.07.04: Management of sevrals boards + //if (( i_AutoCalibration == FALSE) && (i_InterruptFlag == FALSE)) + if ((s_BoardInfos[dev->minor].i_AutoCalibration == FALSE) + && (s_BoardInfos[dev->minor].i_InterruptFlag == FALSE)) + //END JK 06.07.04: Management of sevrals boards + { + i_APCI3200_ReadCalibrationOffsetValue(dev, + &ui_DummyValue); + //BEGIN JK 06.07.04: Management of sevrals boards + //ui_InterruptChannelValue[i_Count + 1]=ui_DummyValue; + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue[s_BoardInfos[dev-> + minor].i_Count + 1] = ui_DummyValue; + //END JK 06.07.04: Management of sevrals boards + i_APCI3200_ReadCalibrationGainValue(dev, + &ui_DummyValue); + //BEGIN JK 06.07.04: Management of sevrals boards + //ui_InterruptChannelValue[i_Count + 2]=ui_DummyValue; + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue[s_BoardInfos[dev-> + minor].i_Count + 2] = ui_DummyValue; + //END JK 06.07.04: Management of sevrals boards + } //if (( i_AutoCalibration == FALSE) && (i_InterruptFlag == FALSE)) + + //BEGIN JK 06.07.04: Management of sevrals boards + //if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)&& (i_CJCAvailable==1)) + if ((s_BoardInfos[dev->minor].i_ADDIDATAType == 2) + && (s_BoardInfos[dev->minor].i_InterruptFlag == FALSE) + && (s_BoardInfos[dev->minor].i_CJCAvailable == 1)) + //END JK 06.07.04: Management of sevrals boards + { + /**********************************************************/ + /*Test if the Calibration channel must be read for the CJC */ + /**********************************************************/ + /**********************************/ + /*Test if the polarity is the same */ + /**********************************/ + //BEGIN JK 06.07.04: Management of sevrals boards + //if(i_CJCPolarity!=i_ADDIDATAPolarity) + if (s_BoardInfos[dev->minor].i_CJCPolarity != + s_BoardInfos[dev->minor].i_ADDIDATAPolarity) + //END JK 06.07.04: Management of sevrals boards + { + i_ConvertCJCCalibration = 1; + } //if(i_CJCPolarity!=i_ADDIDATAPolarity) + else { + //BEGIN JK 06.07.04: Management of sevrals boards + //if(i_CJCGain==i_ADDIDATAGain) + if (s_BoardInfos[dev->minor].i_CJCGain == + s_BoardInfos[dev->minor].i_ADDIDATAGain) + //END JK 06.07.04: Management of sevrals boards + { + i_ConvertCJCCalibration = 0; + } //if(i_CJCGain==i_ADDIDATAGain) + else { + i_ConvertCJCCalibration = 1; + } //elseif(i_CJCGain==i_ADDIDATAGain) + } //elseif(i_CJCPolarity!=i_ADDIDATAPolarity) + if (i_ConvertCJCCalibration == 1) { + i_APCI3200_ReadCJCCalOffset(dev, + &ui_DummyValue); + //BEGIN JK 06.07.04: Management of sevrals boards + //ui_InterruptChannelValue[i_Count+4]=ui_DummyValue; + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue[s_BoardInfos + [dev->minor].i_Count + 4] = + ui_DummyValue; + //END JK 06.07.04: Management of sevrals boards + + i_APCI3200_ReadCJCCalGain(dev, &ui_DummyValue); + + //BEGIN JK 06.07.04: Management of sevrals boards + //ui_InterruptChannelValue[i_Count+5]=ui_DummyValue; + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue[s_BoardInfos + [dev->minor].i_Count + 5] = + ui_DummyValue; + //END JK 06.07.04: Management of sevrals boards + } //if(i_ConvertCJCCalibration==1) + else { + //BEGIN JK 06.07.04: Management of sevrals boards + //ui_InterruptChannelValue[i_Count+4]=0; + //ui_InterruptChannelValue[i_Count+5]=0; + + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue[s_BoardInfos + [dev->minor].i_Count + 4] = 0; + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue[s_BoardInfos + [dev->minor].i_Count + 5] = 0; + //END JK 06.07.04: Management of sevrals boards + } //elseif(i_ConvertCJCCalibration==1) + } //if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)) + + //BEGIN JK 06.07.04: Management of sevrals boards + //if(i_ScanType!=1) + if (s_BoardInfos[dev->minor].i_ScanType != 1) { + //i_Count=0; + s_BoardInfos[dev->minor].i_Count = 0; + } //if(i_ScanType!=1) + else { + //i_Count=i_Count +6; + //Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + //s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count +6; + s_BoardInfos[dev->minor].i_Count = + s_BoardInfos[dev->minor].i_Count + 9; + //End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + } //else if(i_ScanType!=1) + + //if((i_ScanType==1) &&(i_InterruptFlag==1)) + if ((s_BoardInfos[dev->minor].i_ScanType == 1) + && (s_BoardInfos[dev->minor].i_InterruptFlag == 1)) { + //i_Count=i_Count-6; + //Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + //s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count-6; + s_BoardInfos[dev->minor].i_Count = + s_BoardInfos[dev->minor].i_Count - 9; + //End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + } + //if(i_ScanType==0) + if (s_BoardInfos[dev->minor].i_ScanType == 0) { + /* + data[0]= ui_InterruptChannelValue[0]; + data[1]= ui_InterruptChannelValue[1]; + data[2]= ui_InterruptChannelValue[2]; + data[3]= ui_InterruptChannelValue[3]; + data[4]= ui_InterruptChannelValue[4]; + data[5]= ui_InterruptChannelValue[5]; + */ +#ifdef PRINT_INFO + printk("\n data[0]= s_BoardInfos [dev->minor].ui_InterruptChannelValue[0];"); +#endif + data[0] = + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue[0]; + data[1] = + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue[1]; + data[2] = + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue[2]; + data[3] = + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue[3]; + data[4] = + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue[4]; + data[5] = + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue[5]; + + //Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + //printk("\n 0 - i_APCI3200_GetChannelCalibrationValue data [6] = %lu, data [7] = %lu, data [8] = %lu", data [6], data [7], data [8]); + i_APCI3200_GetChannelCalibrationValue(dev, + s_BoardInfos[dev->minor].ui_Channel_num, + &data[6], &data[7], &data[8]); + //End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + } + break; + case 1: + + for (i = 0; i < insn->n; i++) { + //data[i]=ui_InterruptChannelValue[i]; + data[i] = + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue[i]; + } + + //i_Count=0; + //i_Sum=0; + //if(i_ScanType==1) + s_BoardInfos[dev->minor].i_Count = 0; + s_BoardInfos[dev->minor].i_Sum = 0; + if (s_BoardInfos[dev->minor].i_ScanType == 1) { + //i_Initialised=0; + //i_InterruptFlag=0; + s_BoardInfos[dev->minor].i_Initialised = 0; + s_BoardInfos[dev->minor].i_InterruptFlag = 0; + //END JK 06.07.04: Management of sevrals boards + } + break; + default: + printk("\nThe parameters passed are in error\n"); + i_APCI3200_Reset(dev); + return -EINVAL; + } //switch(insn->unused[0]) + + return insn->n; +} + +/* + +----------------------------------------------------------------------------+ + | Function Name : int i_APCI3200_Read1AnalogInputChannel | + | (comedi_device *dev,comedi_subdevice *s, | + | comedi_insn *insn,lsampl_t *data) | + +----------------------------------------------------------------------------+ + | Task : Read value of the selected channel | + +----------------------------------------------------------------------------+ + | Input Parameters : comedi_device *dev : Driver handle | + | UINT ui_NoOfChannel : Channel No to read | + | UINT *data : Data Pointer to read status | + +----------------------------------------------------------------------------+ + | Output Parameters : -- | + | data[0] : Digital Value read | + | + +----------------------------------------------------------------------------+ + | Return Value : TRUE : No error occur | + | : FALSE : Error occur. Return the error | + | | + +----------------------------------------------------------------------------+ +*/ +INT i_APCI3200_Read1AnalogInputChannel(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + UINT ui_EOC = 0; + UINT ui_ChannelNo = 0; + UINT ui_CommandRegister = 0; + + //BEGIN JK 06.07.04: Management of sevrals boards + //ui_ChannelNo=i_ChannelNo; + ui_ChannelNo = s_BoardInfos[dev->minor].i_ChannelNo; + + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + /*********************************/ + /* Write the channel to configure */ + /*********************************/ + //Begin JK 20.10.2004: Bad channel value is used when using differential mode + //outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); + //outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); + outl(0 | s_BoardInfos[dev->minor].i_ChannelNo, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x4); + //End JK 20.10.2004: Bad channel value is used when using differential mode + + /*******************************/ + /* Set the convert timing unit */ + /*******************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + + //outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); + outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36); + + /**************************/ + /* Set the convert timing */ + /**************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + + //outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); + outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32); + + /**************************************************************************/ + /* Set the start end stop index to the selected channel and set the start */ + /**************************************************************************/ + + ui_CommandRegister = ui_ChannelNo | (ui_ChannelNo << 8) | 0x80000; + + /*********************************/ + /*Test if the interrupt is enable */ + /*********************************/ + + //if (i_InterruptFlag == ADDIDATA_ENABLE) + if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) { + /************************/ + /* Enable the interrupt */ + /************************/ + ui_CommandRegister = ui_CommandRegister | 0x00100000; + } //if (i_InterruptFlag == ADDIDATA_ENABLE) + + /******************************/ + /* Write the command register */ + /******************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + + //outl(ui_CommandRegister, devpriv->iobase+i_Offset + 8); + outl(ui_CommandRegister, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); + + /*****************************/ + /*Test if interrupt is enable */ + /*****************************/ + //if (i_InterruptFlag == ADDIDATA_DISABLE) + if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) { + do { + /*************************/ + /*Read the EOC Status bit */ + /*************************/ + + //ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; + ui_EOC = inl(devpriv->iobase + + s_BoardInfos[dev->minor].i_Offset + 20) & 1; + + } while (ui_EOC != 1); + + /***************************************/ + /* Read the digital value of the input */ + /***************************************/ + + //data[0] = inl (devpriv->iobase+i_Offset + 28); + data[0] = + inl(devpriv->iobase + + s_BoardInfos[dev->minor].i_Offset + 28); + //END JK 06.07.04: Management of sevrals boards + + } // if (i_InterruptFlag == ADDIDATA_DISABLE) + return 0; +} + +/* + +----------------------------------------------------------------------------+ + | Function Name : int i_APCI3200_ReadCalibrationOffsetValue | + | (comedi_device *dev,comedi_subdevice *s, | + | comedi_insn *insn,lsampl_t *data) | + +----------------------------------------------------------------------------+ + | Task : Read calibration offset value of the selected channel| + +----------------------------------------------------------------------------+ + | Input Parameters : comedi_device *dev : Driver handle | + | UINT *data : Data Pointer to read status | + +----------------------------------------------------------------------------+ + | Output Parameters : -- | + | data[0] : Calibration offset Value | + | + +----------------------------------------------------------------------------+ + | Return Value : TRUE : No error occur | + | : FALSE : Error occur. Return the error | + | | + +----------------------------------------------------------------------------+ +*/ +int i_APCI3200_ReadCalibrationOffsetValue(comedi_device * dev, UINT * data) +{ + UINT ui_Temp = 0, ui_EOC = 0; + UINT ui_CommandRegister = 0; + + //BEGIN JK 06.07.04: Management of sevrals boards + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + /*********************************/ + /* Write the channel to configure */ + /*********************************/ + //Begin JK 20.10.2004: This seems not necessary ! + //outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); + //outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); + //End JK 20.10.2004: This seems not necessary ! + + /*******************************/ + /* Set the convert timing unit */ + /*******************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); + outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36); + /**************************/ + /* Set the convert timing */ + /**************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); + outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32); + /*****************************/ + /*Read the calibration offset */ + /*****************************/ + //ui_Temp = inl(devpriv->iobase+i_Offset + 12); + ui_Temp = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); + + /*********************************/ + /*Configure the Offset Conversion */ + /*********************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl((ui_Temp | 0x00020000), devpriv->iobase+i_Offset + 12); + outl((ui_Temp | 0x00020000), + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); + /*******************************/ + /*Initialise ui_CommandRegister */ + /*******************************/ + + ui_CommandRegister = 0; + + /*********************************/ + /*Test if the interrupt is enable */ + /*********************************/ + + //if (i_InterruptFlag == ADDIDATA_ENABLE) + if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) { + + /**********************/ + /*Enable the interrupt */ + /**********************/ + + ui_CommandRegister = ui_CommandRegister | 0x00100000; + + } //if (i_InterruptFlag == ADDIDATA_ENABLE) + + /**********************/ + /*Start the conversion */ + /**********************/ + ui_CommandRegister = ui_CommandRegister | 0x00080000; + + /***************************/ + /*Write the command regiter */ + /***************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl(ui_CommandRegister, devpriv->iobase+i_Offset + 8); + outl(ui_CommandRegister, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); + + /*****************************/ + /*Test if interrupt is enable */ + /*****************************/ + + //if (i_InterruptFlag == ADDIDATA_DISABLE) + if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) { + + do { + /*******************/ + /*Read the EOC flag */ + /*******************/ + + //ui_EOC = inl (devpriv->iobase+i_Offset + 20) & 1; + ui_EOC = inl(devpriv->iobase + + s_BoardInfos[dev->minor].i_Offset + 20) & 1; + + } while (ui_EOC != 1); + + /**************************************************/ + /*Read the digital value of the calibration Offset */ + /**************************************************/ + + //data[0] = inl(devpriv->iobase+i_Offset+ 28); + data[0] = + inl(devpriv->iobase + + s_BoardInfos[dev->minor].i_Offset + 28); + } //if (i_InterruptFlag == ADDIDATA_DISABLE) + return 0; +} + +/* + +----------------------------------------------------------------------------+ + | Function Name : int i_APCI3200_ReadCalibrationGainValue | + | (comedi_device *dev,comedi_subdevice *s, | + | comedi_insn *insn,lsampl_t *data) | + +----------------------------------------------------------------------------+ + | Task : Read calibration gain value of the selected channel | + +----------------------------------------------------------------------------+ + | Input Parameters : comedi_device *dev : Driver handle | + | UINT *data : Data Pointer to read status | + +----------------------------------------------------------------------------+ + | Output Parameters : -- | + | data[0] : Calibration gain Value Of Input | + | + +----------------------------------------------------------------------------+ + | Return Value : TRUE : No error occur | + | : FALSE : Error occur. Return the error | + | | + +----------------------------------------------------------------------------+ +*/ +int i_APCI3200_ReadCalibrationGainValue(comedi_device * dev, UINT * data) +{ + UINT ui_EOC = 0; + INT ui_CommandRegister = 0; + + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + /*********************************/ + /* Write the channel to configure */ + /*********************************/ + //Begin JK 20.10.2004: This seems not necessary ! + //outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); + //outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); + //End JK 20.10.2004: This seems not necessary ! + + /***************************/ + /*Read the calibration gain */ + /***************************/ + /*******************************/ + /* Set the convert timing unit */ + /*******************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); + outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36); + /**************************/ + /* Set the convert timing */ + /**************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); + outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32); + /*******************************/ + /*Configure the Gain Conversion */ + /*******************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl(0x00040000 , devpriv->iobase+i_Offset + 12); + outl(0x00040000, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); + + /*******************************/ + /*Initialise ui_CommandRegister */ + /*******************************/ + + ui_CommandRegister = 0; + + /*********************************/ + /*Test if the interrupt is enable */ + /*********************************/ + + //if (i_InterruptFlag == ADDIDATA_ENABLE) + if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) { + + /**********************/ + /*Enable the interrupt */ + /**********************/ + + ui_CommandRegister = ui_CommandRegister | 0x00100000; + + } //if (i_InterruptFlag == ADDIDATA_ENABLE) + + /**********************/ + /*Start the conversion */ + /**********************/ + + ui_CommandRegister = ui_CommandRegister | 0x00080000; + /***************************/ + /*Write the command regiter */ + /***************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl(ui_CommandRegister , devpriv->iobase+i_Offset + 8); + outl(ui_CommandRegister, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); + + /*****************************/ + /*Test if interrupt is enable */ + /*****************************/ + + //if (i_InterruptFlag == ADDIDATA_DISABLE) + if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) { + + do { + + /*******************/ + /*Read the EOC flag */ + /*******************/ + + //ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; + ui_EOC = inl(devpriv->iobase + + s_BoardInfos[dev->minor].i_Offset + 20) & 1; + + } while (ui_EOC != 1); + + /************************************************/ + /*Read the digital value of the calibration Gain */ + /************************************************/ + + //data[0] = inl(devpriv->iobase+i_Offset + 28); + data[0] = + inl(devpriv->iobase + + s_BoardInfos[dev->minor].i_Offset + 28); + + } //if (i_InterruptFlag == ADDIDATA_DISABLE) + return 0; +} + +/* + +----------------------------------------------------------------------------+ + | Function Name : int i_APCI3200_ReadCJCValue | + | (comedi_device *dev,comedi_subdevice *s, | + | comedi_insn *insn,lsampl_t *data) | + +----------------------------------------------------------------------------+ + | Task : Read CJC value of the selected channel | + +----------------------------------------------------------------------------+ + | Input Parameters : comedi_device *dev : Driver handle | + | UINT *data : Data Pointer to read status | + +----------------------------------------------------------------------------+ + | Output Parameters : -- | + | data[0] : CJC Value | + | + +----------------------------------------------------------------------------+ + | Return Value : TRUE : No error occur | + | : FALSE : Error occur. Return the error | + | | + +----------------------------------------------------------------------------+ +*/ + +int i_APCI3200_ReadCJCValue(comedi_device * dev, lsampl_t * data) +{ + UINT ui_EOC = 0; + INT ui_CommandRegister = 0; + + /******************************/ + /*Set the converting time unit */ + /******************************/ + + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + + //outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); + outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36); + /**************************/ + /* Set the convert timing */ + /**************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + + //outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); + outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32); + + /******************************/ + /*Configure the CJC Conversion */ + /******************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + + //outl( 0x00000400 , devpriv->iobase+i_Offset + 4); + outl(0x00000400, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4); + /*******************************/ + /*Initialise dw_CommandRegister */ + /*******************************/ + ui_CommandRegister = 0; + /*********************************/ + /*Test if the interrupt is enable */ + /*********************************/ + //if (i_InterruptFlag == ADDIDATA_ENABLE) + if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) { + /**********************/ + /*Enable the interrupt */ + /**********************/ + ui_CommandRegister = ui_CommandRegister | 0x00100000; + } + + /**********************/ + /*Start the conversion */ + /**********************/ + + ui_CommandRegister = ui_CommandRegister | 0x00080000; + + /***************************/ + /*Write the command regiter */ + /***************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl(ui_CommandRegister , devpriv->iobase+i_Offset + 8); + outl(ui_CommandRegister, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); + + /*****************************/ + /*Test if interrupt is enable */ + /*****************************/ + + //if (i_InterruptFlag == ADDIDATA_DISABLE) + if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) { + do { + + /*******************/ + /*Read the EOC flag */ + /*******************/ + + //ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; + ui_EOC = inl(devpriv->iobase + + s_BoardInfos[dev->minor].i_Offset + 20) & 1; + + } while (ui_EOC != 1); + + /***********************************/ + /*Read the digital value of the CJC */ + /***********************************/ + + //data[0] = inl(devpriv->iobase+i_Offset + 28); + data[0] = + inl(devpriv->iobase + + s_BoardInfos[dev->minor].i_Offset + 28); + + } //if (i_InterruptFlag == ADDIDATA_DISABLE) + return 0; +} + +/* + +----------------------------------------------------------------------------+ + | Function Name : int i_APCI3200_ReadCJCCalOffset | + | (comedi_device *dev,comedi_subdevice *s, | + | comedi_insn *insn,lsampl_t *data) | + +----------------------------------------------------------------------------+ + | Task : Read CJC calibration offset value of the selected channel + +----------------------------------------------------------------------------+ + | Input Parameters : comedi_device *dev : Driver handle | + | UINT *data : Data Pointer to read status | + +----------------------------------------------------------------------------+ + | Output Parameters : -- | + | data[0] : CJC calibration offset Value + | + +----------------------------------------------------------------------------+ + | Return Value : TRUE : No error occur | + | : FALSE : Error occur. Return the error | + | | + +----------------------------------------------------------------------------+ +*/ +int i_APCI3200_ReadCJCCalOffset(comedi_device * dev, lsampl_t * data) +{ + UINT ui_EOC = 0; + INT ui_CommandRegister = 0; + /*******************************************/ + /*Read calibration offset value for the CJC */ + /*******************************************/ + /*******************************/ + /* Set the convert timing unit */ + /*******************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); + outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36); + /**************************/ + /* Set the convert timing */ + /**************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); + outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32); + /******************************/ + /*Configure the CJC Conversion */ + /******************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl(0x00000400 , devpriv->iobase+i_Offset + 4); + outl(0x00000400, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4); + /*********************************/ + /*Configure the Offset Conversion */ + /*********************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl(0x00020000, devpriv->iobase+i_Offset + 12); + outl(0x00020000, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); + /*******************************/ + /*Initialise ui_CommandRegister */ + /*******************************/ + ui_CommandRegister = 0; + /*********************************/ + /*Test if the interrupt is enable */ + /*********************************/ + + //if (i_InterruptFlag == ADDIDATA_ENABLE) + if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) { + /**********************/ + /*Enable the interrupt */ + /**********************/ + ui_CommandRegister = ui_CommandRegister | 0x00100000; + + } + + /**********************/ + /*Start the conversion */ + /**********************/ + ui_CommandRegister = ui_CommandRegister | 0x00080000; + /***************************/ + /*Write the command regiter */ + /***************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl(ui_CommandRegister,devpriv->iobase+i_Offset + 8); + outl(ui_CommandRegister, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); + //if (i_InterruptFlag == ADDIDATA_DISABLE) + if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) { + do { + /*******************/ + /*Read the EOC flag */ + /*******************/ + //ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; + ui_EOC = inl(devpriv->iobase + + s_BoardInfos[dev->minor].i_Offset + 20) & 1; + } while (ui_EOC != 1); + + /**************************************************/ + /*Read the digital value of the calibration Offset */ + /**************************************************/ + //data[0] = inl(devpriv->iobase+i_Offset + 28); + data[0] = + inl(devpriv->iobase + + s_BoardInfos[dev->minor].i_Offset + 28); + } //if (i_InterruptFlag == ADDIDATA_DISABLE) + return 0; +} + +/* + +----------------------------------------------------------------------------+ + | Function Name : int i_APCI3200_ReadCJCGainValue | + | (comedi_device *dev,comedi_subdevice *s, | + | comedi_insn *insn,lsampl_t *data) | + +----------------------------------------------------------------------------+ + | Task : Read CJC calibration gain value + +----------------------------------------------------------------------------+ + | Input Parameters : comedi_device *dev : Driver handle | + | UINT ui_NoOfChannels : No Of Channels To read | + | UINT *data : Data Pointer to read status | + +----------------------------------------------------------------------------+ + | Output Parameters : -- | + | data[0] : CJC calibration gain value + | + +----------------------------------------------------------------------------+ + | Return Value : TRUE : No error occur | + | : FALSE : Error occur. Return the error | + | | + +----------------------------------------------------------------------------+ +*/ +int i_APCI3200_ReadCJCCalGain(comedi_device * dev, lsampl_t * data) +{ + UINT ui_EOC = 0; + INT ui_CommandRegister = 0; + /*******************************/ + /* Set the convert timing unit */ + /*******************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); + outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36); + /**************************/ + /* Set the convert timing */ + /**************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); + outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32); + /******************************/ + /*Configure the CJC Conversion */ + /******************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl(0x00000400,devpriv->iobase+i_Offset + 4); + outl(0x00000400, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4); + /*******************************/ + /*Configure the Gain Conversion */ + /*******************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl(0x00040000,devpriv->iobase+i_Offset + 12); + outl(0x00040000, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); + + /*******************************/ + /*Initialise dw_CommandRegister */ + /*******************************/ + ui_CommandRegister = 0; + /*********************************/ + /*Test if the interrupt is enable */ + /*********************************/ + //if (i_InterruptFlag == ADDIDATA_ENABLE) + if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) { + /**********************/ + /*Enable the interrupt */ + /**********************/ + ui_CommandRegister = ui_CommandRegister | 0x00100000; + } + /**********************/ + /*Start the conversion */ + /**********************/ + ui_CommandRegister = ui_CommandRegister | 0x00080000; + /***************************/ + /*Write the command regiter */ + /***************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl(ui_CommandRegister ,devpriv->iobase+i_Offset + 8); + outl(ui_CommandRegister, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); + //if (i_InterruptFlag == ADDIDATA_DISABLE) + if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) { + do { + /*******************/ + /*Read the EOC flag */ + /*******************/ + //ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; + ui_EOC = inl(devpriv->iobase + + s_BoardInfos[dev->minor].i_Offset + 20) & 1; + } while (ui_EOC != 1); + /************************************************/ + /*Read the digital value of the calibration Gain */ + /************************************************/ + //data[0] = inl (devpriv->iobase+i_Offset + 28); + data[0] = + inl(devpriv->iobase + + s_BoardInfos[dev->minor].i_Offset + 28); + } //if (i_InterruptFlag == ADDIDATA_DISABLE) + return 0; +} + +/* + +----------------------------------------------------------------------------+ + | Function Name : int i_APCI3200_InsnBits_AnalogInput_Test | + | (comedi_device *dev,comedi_subdevice *s, | + | comedi_insn *insn,lsampl_t *data) | + +----------------------------------------------------------------------------+ + | Task : Tests the Selected Anlog Input Channel | + +----------------------------------------------------------------------------+ + | Input Parameters : comedi_device *dev : Driver handle | + | comedi_subdevice *s : Subdevice Pointer | + | comedi_insn *insn : Insn Structure Pointer | + | lsampl_t *data : Data Pointer contains | + | configuration parameters as below | + | + | + | data[0] : 0 TestAnalogInputShortCircuit + | 1 TestAnalogInputConnection | + + +----------------------------------------------------------------------------+ + | Output Parameters : -- | + | data[0] : Digital value obtained | + | data[1] : calibration offset | + | data[2] : calibration gain | + | | + | | + +----------------------------------------------------------------------------+ + | Return Value : TRUE : No error occur | + | : FALSE : Error occur. Return the error | + | | + +----------------------------------------------------------------------------+ +*/ + +INT i_APCI3200_InsnBits_AnalogInput_Test(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + UINT ui_Configuration = 0; + INT i_Temp; //,i_TimeUnit; + //if(i_Initialised==0) + + if (s_BoardInfos[dev->minor].i_Initialised == 0) { + i_APCI3200_Reset(dev); + return -EINVAL; + } //if(i_Initialised==0); + if (data[0] != 0 && data[0] != 1) { + printk("\nError in selection of functionality\n"); + i_APCI3200_Reset(dev); + return -EINVAL; + } //if(data[0]!=0 && data[0]!=1) + + if (data[0] == 1) //Perform Short Circuit TEST + { + /**************************/ + /*Set the short-cicuit bit */ + /**************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor]. + i_Offset + 12) >> 19) & 1) != + 1) ; + //outl((0x00001000 |i_ChannelNo) , devpriv->iobase+i_Offset + 4); + outl((0x00001000 | s_BoardInfos[dev->minor].i_ChannelNo), + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 4); + /*************************/ + /*Set the time unit to ns */ + /*************************/ + /* i_TimeUnit= i_ADDIDATAConversionTimeUnit; + i_ADDIDATAConversionTimeUnit= 1; */ + //i_Temp= i_InterruptFlag ; + i_Temp = s_BoardInfos[dev->minor].i_InterruptFlag; + //i_InterruptFlag = ADDIDATA_DISABLE; + s_BoardInfos[dev->minor].i_InterruptFlag = ADDIDATA_DISABLE; + i_APCI3200_Read1AnalogInputChannel(dev, s, insn, data); + //if(i_AutoCalibration == FALSE) + if (s_BoardInfos[dev->minor].i_AutoCalibration == FALSE) { + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor]. + i_Offset + + 12) >> 19) & 1) != 1) ; + + //outl((0x00001000 |i_ChannelNo) , devpriv->iobase+i_Offset + 4); + outl((0x00001000 | s_BoardInfos[dev->minor]. + i_ChannelNo), + devpriv->iobase + + s_BoardInfos[dev->minor].i_Offset + 4); + data++; + i_APCI3200_ReadCalibrationOffsetValue(dev, data); + data++; + i_APCI3200_ReadCalibrationGainValue(dev, data); + } + } else { + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor]. + i_Offset + 12) >> 19) & 1) != + 1) ; + //outl((0x00000800|i_ChannelNo) , devpriv->iobase+i_Offset + 4); + outl((0x00000800 | s_BoardInfos[dev->minor].i_ChannelNo), + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 4); + //ui_Configuration = inl(devpriv->iobase+i_Offset + 0); + ui_Configuration = + inl(devpriv->iobase + + s_BoardInfos[dev->minor].i_Offset + 0); + /*************************/ + /*Set the time unit to ns */ + /*************************/ + /* i_TimeUnit= i_ADDIDATAConversionTimeUnit; + i_ADDIDATAConversionTimeUnit= 1; */ + //i_Temp= i_InterruptFlag ; + i_Temp = s_BoardInfos[dev->minor].i_InterruptFlag; + //i_InterruptFlag = ADDIDATA_DISABLE; + s_BoardInfos[dev->minor].i_InterruptFlag = ADDIDATA_DISABLE; + i_APCI3200_Read1AnalogInputChannel(dev, s, insn, data); + //if(i_AutoCalibration == FALSE) + if (s_BoardInfos[dev->minor].i_AutoCalibration == FALSE) { + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor]. + i_Offset + + 12) >> 19) & 1) != 1) ; + //outl((0x00000800|i_ChannelNo) , devpriv->iobase+i_Offset + 4); + outl((0x00000800 | s_BoardInfos[dev->minor]. + i_ChannelNo), + devpriv->iobase + + s_BoardInfos[dev->minor].i_Offset + 4); + data++; + i_APCI3200_ReadCalibrationOffsetValue(dev, data); + data++; + i_APCI3200_ReadCalibrationGainValue(dev, data); + } + } + //i_InterruptFlag=i_Temp ; + s_BoardInfos[dev->minor].i_InterruptFlag = i_Temp; + //printk("\ni_InterruptFlag=%d\n",i_InterruptFlag); + return insn->n; +} + +/* + +----------------------------------------------------------------------------+ + | Function Name : int i_APCI3200_InsnWriteReleaseAnalogInput | + | (comedi_device *dev,comedi_subdevice *s, | + | comedi_insn *insn,lsampl_t *data) | + +----------------------------------------------------------------------------+ + | Task : Resets the channels | + +----------------------------------------------------------------------------+ + | Input Parameters : comedi_device *dev : Driver handle | + | comedi_subdevice *s : Subdevice Pointer | + | comedi_insn *insn : Insn Structure Pointer | + | lsampl_t *data : Data Pointer + +----------------------------------------------------------------------------+ + | Output Parameters : -- | + + +----------------------------------------------------------------------------+ + | Return Value : TRUE : No error occur | + | : FALSE : Error occur. Return the error | + | | + +----------------------------------------------------------------------------+ +*/ + +INT i_APCI3200_InsnWriteReleaseAnalogInput(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + i_APCI3200_Reset(dev); + return insn->n; +} + +/* + +----------------------------------------------------------------------------+ + | Function name :int i_APCI3200_CommandTestAnalogInput(comedi_device *dev| + | ,comedi_subdevice *s,comedi_cmd *cmd) | + | | + +----------------------------------------------------------------------------+ + | Task : Test validity for a command for cyclic anlog input | + | acquisition | + | | + +----------------------------------------------------------------------------+ + | Input Parameters : comedi_device *dev | + | comedi_subdevice *s | + | comedi_cmd *cmd | + | | + | + | | + | | + | | + +----------------------------------------------------------------------------+ + | Return Value :0 | + | | + +----------------------------------------------------------------------------+ +*/ + +int i_APCI3200_CommandTestAnalogInput(comedi_device * dev, comedi_subdevice * s, + comedi_cmd * cmd) +{ + + int err = 0; + int tmp; // divisor1,divisor2; + UINT ui_ConvertTime = 0; + UINT ui_ConvertTimeBase = 0; + UINT ui_DelayTime = 0; + UINT ui_DelayTimeBase = 0; + INT i_Triggermode = 0; + INT i_TriggerEdge = 0; + INT i_NbrOfChannel = 0; + INT i_Cpt = 0; + double d_ConversionTimeForAllChannels = 0.0; + double d_SCANTimeNewUnit = 0.0; + // step 1: make sure trigger sources are trivially valid + + tmp = cmd->start_src; + cmd->start_src &= TRIG_NOW | TRIG_EXT; + if (!cmd->start_src || tmp != cmd->start_src) + err++; + tmp = cmd->scan_begin_src; + cmd->scan_begin_src &= TRIG_TIMER | TRIG_FOLLOW; + if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src) + err++; + tmp = cmd->convert_src; + cmd->convert_src &= TRIG_TIMER; + if (!cmd->convert_src || tmp != cmd->convert_src) + err++; + tmp = cmd->scan_end_src; + cmd->scan_end_src &= TRIG_COUNT; + if (!cmd->scan_end_src || tmp != cmd->scan_end_src) + err++; + tmp = cmd->stop_src; + cmd->stop_src &= TRIG_COUNT | TRIG_NONE; + if (!cmd->stop_src || tmp != cmd->stop_src) + err++; + //if(i_InterruptFlag==0) + if (s_BoardInfos[dev->minor].i_InterruptFlag == 0) { + err++; + // printk("\nThe interrupt should be enabled\n"); + } + if (err) { + i_APCI3200_Reset(dev); + return 1; + } + + if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_EXT) { + err++; + } + if (cmd->start_src == TRIG_EXT) { + i_TriggerEdge = cmd->start_arg & 0xFFFF; + i_Triggermode = cmd->start_arg >> 16; + if (i_TriggerEdge < 1 || i_TriggerEdge > 3) { + err++; + printk("\nThe trigger edge selection is in error\n"); + } + if (i_Triggermode != 2) { + err++; + printk("\nThe trigger mode selection is in error\n"); + } + } + + if (cmd->scan_begin_src != TRIG_TIMER && + cmd->scan_begin_src != TRIG_FOLLOW) + err++; + + if (cmd->convert_src != TRIG_TIMER) + err++; + + if (cmd->scan_end_src != TRIG_COUNT) { + cmd->scan_end_src = TRIG_COUNT; + err++; + } + + if (cmd->stop_src != TRIG_NONE && cmd->stop_src != TRIG_COUNT) + err++; + + if (err) { + i_APCI3200_Reset(dev); + return 2; + } + //i_FirstChannel=cmd->chanlist[0]; + s_BoardInfos[dev->minor].i_FirstChannel = cmd->chanlist[0]; + //i_LastChannel=cmd->chanlist[1]; + s_BoardInfos[dev->minor].i_LastChannel = cmd->chanlist[1]; + + if (cmd->convert_src == TRIG_TIMER) { + ui_ConvertTime = cmd->convert_arg & 0xFFFF; + ui_ConvertTimeBase = cmd->convert_arg >> 16; + if (ui_ConvertTime != 20 && ui_ConvertTime != 40 + && ui_ConvertTime != 80 && ui_ConvertTime != 160) + { + printk("\nThe selection of conversion time reload value is in error\n"); + err++; + } // if (ui_ConvertTime!=20 && ui_ConvertTime!=40 && ui_ConvertTime!=80 && ui_ConvertTime!=160 ) + if (ui_ConvertTimeBase != 2) { + printk("\nThe selection of conversion time unit is in error\n"); + err++; + } //if(ui_ConvertTimeBase!=2) + } else { + ui_ConvertTime = 0; + ui_ConvertTimeBase = 0; + } + if (cmd->scan_begin_src == TRIG_FOLLOW) { + ui_DelayTime = 0; + ui_DelayTimeBase = 0; + } //if(cmd->scan_begin_src==TRIG_FOLLOW) + else { + ui_DelayTime = cmd->scan_begin_arg & 0xFFFF; + ui_DelayTimeBase = cmd->scan_begin_arg >> 16; + if (ui_DelayTimeBase != 2 && ui_DelayTimeBase != 3) { + err++; + printk("\nThe Delay time base selection is in error\n"); + } + if (ui_DelayTime < 1 && ui_DelayTime > 1023) { + err++; + printk("\nThe Delay time value is in error\n"); + } + if (err) { + i_APCI3200_Reset(dev); + return 3; + } + fpu_begin(); + d_SCANTimeNewUnit = (double)ui_DelayTime; + //i_NbrOfChannel= i_LastChannel-i_FirstChannel + 4; + i_NbrOfChannel = + s_BoardInfos[dev->minor].i_LastChannel - + s_BoardInfos[dev->minor].i_FirstChannel + 4; + /**********************************************************/ + /*calculate the total conversion time for all the channels */ + /**********************************************************/ + d_ConversionTimeForAllChannels = + (double)((double)ui_ConvertTime / + (double)i_NbrOfChannel); + + /*******************************/ + /*Convert the frequence in time */ + /*******************************/ + d_ConversionTimeForAllChannels = + (double)1.0 / d_ConversionTimeForAllChannels; + ui_ConvertTimeBase = 3; + /***********************************/ + /*Test if the time unit is the same */ + /***********************************/ + + if (ui_DelayTimeBase <= ui_ConvertTimeBase) { + + for (i_Cpt = 0; + i_Cpt < (ui_ConvertTimeBase - ui_DelayTimeBase); + i_Cpt++) { + + d_ConversionTimeForAllChannels = + d_ConversionTimeForAllChannels * 1000; + d_ConversionTimeForAllChannels = + d_ConversionTimeForAllChannels + 1; + } + } else { + for (i_Cpt = 0; + i_Cpt < (ui_DelayTimeBase - ui_ConvertTimeBase); + i_Cpt++) { + d_SCANTimeNewUnit = d_SCANTimeNewUnit * 1000; + + } + } + + if (d_ConversionTimeForAllChannels >= d_SCANTimeNewUnit) { + + printk("\nSCAN Delay value cannot be used\n"); + /*********************************/ + /*SCAN Delay value cannot be used */ + /*********************************/ + err++; + } + fpu_end(); + } //else if(cmd->scan_begin_src==TRIG_FOLLOW) + + if (err) { + i_APCI3200_Reset(dev); + return 4; + } + + return 0; +} + +/* + +----------------------------------------------------------------------------+ + | Function name :int i_APCI3200_StopCyclicAcquisition(comedi_device *dev,| + | comedi_subdevice *s)| + | | + +----------------------------------------------------------------------------+ + | Task : Stop the acquisition | + | | + +----------------------------------------------------------------------------+ + | Input Parameters : comedi_device *dev | + | comedi_subdevice *s | + | | + +----------------------------------------------------------------------------+ + | Return Value :0 | + | | + +----------------------------------------------------------------------------+ +*/ + +int i_APCI3200_StopCyclicAcquisition(comedi_device * dev, comedi_subdevice * s) +{ + UINT ui_Configuration = 0; + //i_InterruptFlag=0; + //i_Initialised=0; + //i_Count=0; + //i_Sum=0; + s_BoardInfos[dev->minor].i_InterruptFlag = 0; + s_BoardInfos[dev->minor].i_Initialised = 0; + s_BoardInfos[dev->minor].i_Count = 0; + s_BoardInfos[dev->minor].i_Sum = 0; + + /*******************/ + /*Read the register */ + /*******************/ + //ui_Configuration = inl(devpriv->iobase+i_Offset + 8); + ui_Configuration = + inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); + /*****************************/ + /*Reset the START and IRQ bit */ + /*****************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl((ui_Configuration & 0xFFE7FFFF),devpriv->iobase+i_Offset + 8); + outl((ui_Configuration & 0xFFE7FFFF), + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); + return 0; +} + +/* + +----------------------------------------------------------------------------+ + | Function name : int i_APCI3200_CommandAnalogInput(comedi_device *dev, | + | comedi_subdevice *s) | + | | + +----------------------------------------------------------------------------+ + | Task : Does asynchronous acquisition | + | Determines the mode 1 or 2. | + | | + +----------------------------------------------------------------------------+ + | Input Parameters : comedi_device *dev | + | comedi_subdevice *s | + | | + | | + +----------------------------------------------------------------------------+ + | Return Value : | + | | + +----------------------------------------------------------------------------+ +*/ + +int i_APCI3200_CommandAnalogInput(comedi_device * dev, comedi_subdevice * s) +{ + comedi_cmd *cmd = &s->async->cmd; + UINT ui_Configuration = 0; + //INT i_CurrentSource = 0; + UINT ui_Trigger = 0; + UINT ui_TriggerEdge = 0; + UINT ui_Triggermode = 0; + UINT ui_ScanMode = 0; + UINT ui_ConvertTime = 0; + UINT ui_ConvertTimeBase = 0; + UINT ui_DelayTime = 0; + UINT ui_DelayTimeBase = 0; + UINT ui_DelayMode = 0; + //i_FirstChannel=cmd->chanlist[0]; + //i_LastChannel=cmd->chanlist[1]; + s_BoardInfos[dev->minor].i_FirstChannel = cmd->chanlist[0]; + s_BoardInfos[dev->minor].i_LastChannel = cmd->chanlist[1]; + if (cmd->start_src == TRIG_EXT) { + ui_Trigger = 1; + ui_TriggerEdge = cmd->start_arg & 0xFFFF; + ui_Triggermode = cmd->start_arg >> 16; + } //if(cmd->start_src==TRIG_EXT) + else { + ui_Trigger = 0; + } //elseif(cmd->start_src==TRIG_EXT) + + if (cmd->stop_src == TRIG_COUNT) { + ui_ScanMode = 0; + } // if (cmd->stop_src==TRIG_COUNT) + else { + ui_ScanMode = 2; + } //else if (cmd->stop_src==TRIG_COUNT) + + if (cmd->scan_begin_src == TRIG_FOLLOW) { + ui_DelayTime = 0; + ui_DelayTimeBase = 0; + ui_DelayMode = 0; + } //if(cmd->scan_begin_src==TRIG_FOLLOW) + else { + ui_DelayTime = cmd->scan_begin_arg & 0xFFFF; + ui_DelayTimeBase = cmd->scan_begin_arg >> 16; + ui_DelayMode = 1; + } //else if(cmd->scan_begin_src==TRIG_FOLLOW) + // printk("\nui_DelayTime=%u\n",ui_DelayTime); + // printk("\nui_DelayTimeBase=%u\n",ui_DelayTimeBase); + if (cmd->convert_src == TRIG_TIMER) { + ui_ConvertTime = cmd->convert_arg & 0xFFFF; + ui_ConvertTimeBase = cmd->convert_arg >> 16; + } else { + ui_ConvertTime = 0; + ui_ConvertTimeBase = 0; + } + + // if(i_ADDIDATAType ==1 || ((i_ADDIDATAType==2))) + // { + /**************************************************/ + /*Read the old configuration of the current source */ + /**************************************************/ + //ui_Configuration = inl(devpriv->iobase+i_Offset + 12); + ui_Configuration = + inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); + /***********************************************/ + /*Write the configuration of the current source */ + /***********************************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl((ui_Configuration & 0xFFC00000 ), devpriv->iobase+i_Offset +12); + outl((ui_Configuration & 0xFFC00000), + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); + // } + ui_Configuration = 0; + // printk("\nfirstchannel=%u\n",i_FirstChannel); + // printk("\nlastchannel=%u\n",i_LastChannel); + // printk("\nui_Trigger=%u\n",ui_Trigger); + // printk("\nui_TriggerEdge=%u\n",ui_TriggerEdge); + // printk("\nui_Triggermode=%u\n",ui_Triggermode); + // printk("\nui_DelayMode=%u\n",ui_DelayMode); + // printk("\nui_ScanMode=%u\n",ui_ScanMode); + + //ui_Configuration = i_FirstChannel |(i_LastChannel << 8)| 0x00100000 | + ui_Configuration = + s_BoardInfos[dev->minor].i_FirstChannel | (s_BoardInfos[dev-> + minor]. + i_LastChannel << 8) | 0x00100000 | (ui_Trigger << 24) | + (ui_TriggerEdge << 25) | (ui_Triggermode << 27) | (ui_DelayMode + << 18) | (ui_ScanMode << 16); + + /*************************/ + /*Write the Configuration */ + /*************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl( ui_Configuration, devpriv->iobase+i_Offset + 0x8); + outl(ui_Configuration, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x8); + /***********************/ + /*Write the Delay Value */ + /***********************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl(ui_DelayTime,devpriv->iobase+i_Offset + 40); + outl(ui_DelayTime, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 40); + /***************************/ + /*Write the Delay time base */ + /***************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl(ui_DelayTimeBase,devpriv->iobase+i_Offset + 44); + outl(ui_DelayTimeBase, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 44); + /*********************************/ + /*Write the conversion time value */ + /*********************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl(ui_ConvertTime,devpriv->iobase+i_Offset + 32); + outl(ui_ConvertTime, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32); + + /********************************/ + /*Write the conversion time base */ + /********************************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl(ui_ConvertTimeBase,devpriv->iobase+i_Offset + 36); + outl(ui_ConvertTimeBase, + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36); + /*******************/ + /*Read the register */ + /*******************/ + //ui_Configuration = inl(devpriv->iobase+i_Offset + 4); + ui_Configuration = + inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4); + /******************/ + /*Set the SCAN bit */ + /******************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + + //outl(((ui_Configuration & 0x1E0FF) | 0x00002000),devpriv->iobase+i_Offset + 4); + outl(((ui_Configuration & 0x1E0FF) | 0x00002000), + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4); + /*******************/ + /*Read the register */ + /*******************/ + ui_Configuration = 0; + //ui_Configuration = inl(devpriv->iobase+i_Offset + 8); + ui_Configuration = + inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); + + /*******************/ + /*Set the START bit */ + /*******************/ + //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + + 12) >> 19) & 1) != 1) ; + //outl((ui_Configuration | 0x00080000),devpriv->iobase+i_Offset + 8); + outl((ui_Configuration | 0x00080000), + devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); + return 0; +} + +/* + +----------------------------------------------------------------------------+ + | Function Name : int i_APCI3200_Reset(comedi_device *dev) | + | | + +----------------------------------------------------------------------------+ + | Task :Resets the registers of the card | + +----------------------------------------------------------------------------+ + | Input Parameters : | + +----------------------------------------------------------------------------+ + | Output Parameters : -- | + +----------------------------------------------------------------------------+ + | Return Value : | + | | + +----------------------------------------------------------------------------+ +*/ + +int i_APCI3200_Reset(comedi_device * dev) +{ + INT i_Temp; + DWORD dw_Dummy; + //i_InterruptFlag=0; + //i_Initialised==0; + //i_Count=0; + //i_Sum=0; + + s_BoardInfos[dev->minor].i_InterruptFlag = 0; + s_BoardInfos[dev->minor].i_Initialised = 0; + s_BoardInfos[dev->minor].i_Count = 0; + s_BoardInfos[dev->minor].i_Sum = 0; + s_BoardInfos[dev->minor].b_StructInitialized = 0; + + outl(0x83838383, devpriv->i_IobaseAmcc + 0x60); + + // Enable the interrupt for the controler + dw_Dummy = inl(devpriv->i_IobaseAmcc + 0x38); + outl(dw_Dummy | 0x2000, devpriv->i_IobaseAmcc + 0x38); + outl(0, devpriv->i_IobaseAddon); //Resets the output + /***************/ + /*Empty the buffer */ + /**************/ + for (i_Temp = 0; i_Temp <= 95; i_Temp++) { + //ui_InterruptChannelValue[i_Temp]=0; + s_BoardInfos[dev->minor].ui_InterruptChannelValue[i_Temp] = 0; + } //for(i_Temp=0;i_Temp<=95;i_Temp++) + /*****************************/ + /*Reset the START and IRQ bit */ + /*****************************/ + for (i_Temp = 0; i_Temp <= 192;) { + while (((inl(devpriv->iobase + i_Temp + 12) >> 19) & 1) != 1) ; + outl(0, devpriv->iobase + i_Temp + 8); + i_Temp = i_Temp + 64; + } //for(i_Temp=0;i_Temp<=192;i_Temp+64) + return 0; +} + +/* + +----------------------------------------------------------------------------+ + | Function Name : static void v_APCI3200_Interrupt | + | (int irq , void *d) | + +----------------------------------------------------------------------------+ + | Task : Interrupt processing Routine | + +----------------------------------------------------------------------------+ + | Input Parameters : int irq : irq number | + | void *d : void pointer | + +----------------------------------------------------------------------------+ + | Output Parameters : -- | + +----------------------------------------------------------------------------+ + | Return Value : TRUE : No error occur | + | : FALSE : Error occur. Return the error | + | | + +----------------------------------------------------------------------------+ +*/ +void v_APCI3200_Interrupt(int irq, void *d) +{ + comedi_device *dev = d; + UINT ui_StatusRegister = 0; + UINT ui_ChannelNumber = 0; + INT i_CalibrationFlag = 0; + INT i_CJCFlag = 0; + UINT ui_DummyValue = 0; + UINT ui_DigitalTemperature = 0; + UINT ui_DigitalInput = 0; + int i_ConvertCJCCalibration; + + //BEGIN JK TEST + int i_ReturnValue = 0; + //END JK TEST + + //printk ("\n i_ScanType = %i i_ADDIDATAType = %i", s_BoardInfos [dev->minor].i_ScanType, s_BoardInfos [dev->minor].i_ADDIDATAType); + + //switch(i_ScanType) + switch (s_BoardInfos[dev->minor].i_ScanType) { + case 0: + case 1: + //switch(i_ADDIDATAType) + switch (s_BoardInfos[dev->minor].i_ADDIDATAType) { + case 0: + case 1: + + /************************************/ + /*Read the interrupt status register */ + /************************************/ + //ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16); + ui_StatusRegister = + inl(devpriv->iobase + + s_BoardInfos[dev->minor].i_Offset + 16); + if ((ui_StatusRegister & 0x2) == 0x2) { + //i_CalibrationFlag = ((inl(devpriv->iobase+i_Offset + 12) & 0x00060000) >> 17); + i_CalibrationFlag = + ((inl(devpriv->iobase + + s_BoardInfos[dev-> + minor]. + i_Offset + + 12) & 0x00060000) >> + 17); + /*************************/ + /*Read the channel number */ + /*************************/ + //ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24); + + /*************************************/ + /*Read the digital analog input value */ + /*************************************/ + //ui_DigitalInput = inl(devpriv->iobase+i_Offset + 28); + ui_DigitalInput = + inl(devpriv->iobase + + s_BoardInfos[dev->minor].i_Offset + 28); + + /***********************************************/ + /* Test if the value read is the channel value */ + /***********************************************/ + if (i_CalibrationFlag == 0) { + //ui_InterruptChannelValue[i_Count + 0] = ui_DigitalInput; + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue + [s_BoardInfos[dev->minor]. + i_Count + 0] = ui_DigitalInput; + + //Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + /* + printk("\n 1 - i_APCI3200_GetChannelCalibrationValue (dev, s_BoardInfos %i", ui_ChannelNumber); + i_APCI3200_GetChannelCalibrationValue (dev, s_BoardInfos [dev->minor].ui_Channel_num, + &s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count + 6], + &s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count + 7], + &s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count + 8]); + */ + //End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + + /******************************************************/ + /*Start the conversion of the calibration offset value */ + /******************************************************/ + i_APCI3200_ReadCalibrationOffsetValue + (dev, &ui_DummyValue); + } //if (i_CalibrationFlag == 0) + /**********************************************************/ + /* Test if the value read is the calibration offset value */ + /**********************************************************/ + + if (i_CalibrationFlag == 1) { + + /******************/ + /* Save the value */ + /******************/ + + //ui_InterruptChannelValue[i_Count + 1] = ui_DigitalInput; + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue + [s_BoardInfos[dev->minor]. + i_Count + 1] = ui_DigitalInput; + + /******************************************************/ + /* Start the conversion of the calibration gain value */ + /******************************************************/ + i_APCI3200_ReadCalibrationGainValue(dev, + &ui_DummyValue); + } //if (i_CalibrationFlag == 1) + /******************************************************/ + /*Test if the value read is the calibration gain value */ + /******************************************************/ + + if (i_CalibrationFlag == 2) { + + /****************/ + /*Save the value */ + /****************/ + //ui_InterruptChannelValue[i_Count + 2] = ui_DigitalInput; + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue + [s_BoardInfos[dev->minor]. + i_Count + 2] = ui_DigitalInput; + //if(i_ScanType==1) + if (s_BoardInfos[dev->minor]. + i_ScanType == 1) { + + //i_InterruptFlag=0; + s_BoardInfos[dev->minor]. + i_InterruptFlag = 0; + //i_Count=i_Count + 6; + //Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + //s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count + 6; + s_BoardInfos[dev->minor]. + i_Count = + s_BoardInfos[dev-> + minor].i_Count + 9; + //End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + } //if(i_ScanType==1) + else { + //i_Count=0; + s_BoardInfos[dev->minor]. + i_Count = 0; + } //elseif(i_ScanType==1) + //if(i_ScanType!=1) + if (s_BoardInfos[dev->minor]. + i_ScanType != 1) { + i_ReturnValue = send_sig(SIGIO, devpriv->tsk_Current, 0); // send signal to the sample + } //if(i_ScanType!=1) + else { + //if(i_ChannelCount==i_Sum) + if (s_BoardInfos[dev->minor]. + i_ChannelCount == + s_BoardInfos[dev-> + minor].i_Sum) { + send_sig(SIGIO, devpriv->tsk_Current, 0); // send signal to the sample + } + } //if(i_ScanType!=1) + } //if (i_CalibrationFlag == 2) + } // if ((ui_StatusRegister & 0x2) == 0x2) + + break; + + case 2: + /************************************/ + /*Read the interrupt status register */ + /************************************/ + + //ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16); + ui_StatusRegister = + inl(devpriv->iobase + + s_BoardInfos[dev->minor].i_Offset + 16); + /*************************/ + /*Test if interrupt occur */ + /*************************/ + + if ((ui_StatusRegister & 0x2) == 0x2) { + + //i_CJCFlag = ((inl(devpriv->iobase+i_Offset + 4) & 0x00000400) >> 10); + i_CJCFlag = + ((inl(devpriv->iobase + + s_BoardInfos[dev-> + minor]. + i_Offset + + 4) & 0x00000400) >> 10); + + //i_CalibrationFlag = ((inl(devpriv->iobase+i_Offset + 12) & 0x00060000) >> 17); + i_CalibrationFlag = + ((inl(devpriv->iobase + + s_BoardInfos[dev-> + minor]. + i_Offset + + 12) & 0x00060000) >> + 17); + + /*************************/ + /*Read the channel number */ + /*************************/ + + //ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24); + ui_ChannelNumber = + inl(devpriv->iobase + + s_BoardInfos[dev->minor].i_Offset + 24); + //Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + s_BoardInfos[dev->minor].ui_Channel_num = + ui_ChannelNumber; + //End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + + /************************************/ + /*Read the digital temperature value */ + /************************************/ + //ui_DigitalTemperature = inl(devpriv->iobase+i_Offset + 28); + ui_DigitalTemperature = + inl(devpriv->iobase + + s_BoardInfos[dev->minor].i_Offset + 28); + + /*********************************************/ + /*Test if the value read is the channel value */ + /*********************************************/ + + if ((i_CalibrationFlag == 0) + && (i_CJCFlag == 0)) { + //ui_InterruptChannelValue[i_Count + 0]=ui_DigitalTemperature; + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue + [s_BoardInfos[dev->minor]. + i_Count + 0] = + ui_DigitalTemperature; + + /*********************************/ + /*Start the conversion of the CJC */ + /*********************************/ + i_APCI3200_ReadCJCValue(dev, + &ui_DummyValue); + + } //if ((i_CalibrationFlag == 0) && (i_CJCFlag == 0)) + + /*****************************************/ + /*Test if the value read is the CJC value */ + /*****************************************/ + + if ((i_CJCFlag == 1) + && (i_CalibrationFlag == 0)) { + //ui_InterruptChannelValue[i_Count + 3]=ui_DigitalTemperature; + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue + [s_BoardInfos[dev->minor]. + i_Count + 3] = + ui_DigitalTemperature; + + /******************************************************/ + /*Start the conversion of the calibration offset value */ + /******************************************************/ + i_APCI3200_ReadCalibrationOffsetValue + (dev, &ui_DummyValue); + } // if ((i_CJCFlag == 1) && (i_CalibrationFlag == 0)) + + /********************************************************/ + /*Test if the value read is the calibration offset value */ + /********************************************************/ + + if ((i_CalibrationFlag == 1) + && (i_CJCFlag == 0)) { + //ui_InterruptChannelValue[i_Count + 1]=ui_DigitalTemperature; + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue + [s_BoardInfos[dev->minor]. + i_Count + 1] = + ui_DigitalTemperature; + + /****************************************************/ + /*Start the conversion of the calibration gain value */ + /****************************************************/ + i_APCI3200_ReadCalibrationGainValue(dev, + &ui_DummyValue); + + } //if ((i_CalibrationFlag == 1) && (i_CJCFlag == 0)) + + /******************************************************/ + /*Test if the value read is the calibration gain value */ + /******************************************************/ + + if ((i_CalibrationFlag == 2) + && (i_CJCFlag == 0)) { + //ui_InterruptChannelValue[i_Count + 2]=ui_DigitalTemperature; + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue + [s_BoardInfos[dev->minor]. + i_Count + 2] = + ui_DigitalTemperature; + + /**********************************************************/ + /*Test if the Calibration channel must be read for the CJC */ + /**********************************************************/ + + /*Test if the polarity is the same */ + /**********************************/ + //if(i_CJCPolarity!=i_ADDIDATAPolarity) + if (s_BoardInfos[dev->minor]. + i_CJCPolarity != + s_BoardInfos[dev->minor]. + i_ADDIDATAPolarity) { + i_ConvertCJCCalibration = 1; + } //if(i_CJCPolarity!=i_ADDIDATAPolarity) + else { + //if(i_CJCGain==i_ADDIDATAGain) + if (s_BoardInfos[dev->minor]. + i_CJCGain == + s_BoardInfos[dev-> + minor]. + i_ADDIDATAGain) { + i_ConvertCJCCalibration + = 0; + } //if(i_CJCGain==i_ADDIDATAGain) + else { + i_ConvertCJCCalibration + = 1; + } //elseif(i_CJCGain==i_ADDIDATAGain) + } //elseif(i_CJCPolarity!=i_ADDIDATAPolarity) + if (i_ConvertCJCCalibration == 1) { + /****************************************************************/ + /*Start the conversion of the calibration gain value for the CJC */ + /****************************************************************/ + i_APCI3200_ReadCJCCalOffset(dev, + &ui_DummyValue); + + } //if(i_ConvertCJCCalibration==1) + else { + //ui_InterruptChannelValue[i_Count + 4]=0; + //ui_InterruptChannelValue[i_Count + 5]=0; + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue + [s_BoardInfos[dev-> + minor].i_Count + + 4] = 0; + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue + [s_BoardInfos[dev-> + minor].i_Count + + 5] = 0; + } //elseif(i_ConvertCJCCalibration==1) + } //else if ((i_CalibrationFlag == 2) && (i_CJCFlag == 0)) + + /********************************************************************/ + /*Test if the value read is the calibration offset value for the CJC */ + /********************************************************************/ + + if ((i_CalibrationFlag == 1) + && (i_CJCFlag == 1)) { + //ui_InterruptChannelValue[i_Count + 4]=ui_DigitalTemperature; + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue + [s_BoardInfos[dev->minor]. + i_Count + 4] = + ui_DigitalTemperature; + + /****************************************************************/ + /*Start the conversion of the calibration gain value for the CJC */ + /****************************************************************/ + i_APCI3200_ReadCJCCalGain(dev, + &ui_DummyValue); + + } //if ((i_CalibrationFlag == 1) && (i_CJCFlag == 1)) + + /******************************************************************/ + /*Test if the value read is the calibration gain value for the CJC */ + /******************************************************************/ + + if ((i_CalibrationFlag == 2) + && (i_CJCFlag == 1)) { + //ui_InterruptChannelValue[i_Count + 5]=ui_DigitalTemperature; + s_BoardInfos[dev->minor]. + ui_InterruptChannelValue + [s_BoardInfos[dev->minor]. + i_Count + 5] = + ui_DigitalTemperature; + + //if(i_ScanType==1) + if (s_BoardInfos[dev->minor]. + i_ScanType == 1) { + + //i_InterruptFlag=0; + s_BoardInfos[dev->minor]. + i_InterruptFlag = 0; + //i_Count=i_Count + 6; + //Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + //s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count + 6; + s_BoardInfos[dev->minor]. + i_Count = + s_BoardInfos[dev-> + minor].i_Count + 9; + //End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + } //if(i_ScanType==1) + else { + //i_Count=0; + s_BoardInfos[dev->minor]. + i_Count = 0; + } //elseif(i_ScanType==1) + + //if(i_ScanType!=1) + if (s_BoardInfos[dev->minor]. + i_ScanType != 1) { + send_sig(SIGIO, devpriv->tsk_Current, 0); // send signal to the sample + } //if(i_ScanType!=1) + else { + //if(i_ChannelCount==i_Sum) + if (s_BoardInfos[dev->minor]. + i_ChannelCount == + s_BoardInfos[dev-> + minor].i_Sum) { + send_sig(SIGIO, devpriv->tsk_Current, 0); // send signal to the sample + + } //if(i_ChannelCount==i_Sum) + } //else if(i_ScanType!=1) + } //if ((i_CalibrationFlag == 2) && (i_CJCFlag == 1)) + + } //else if ((ui_StatusRegister & 0x2) == 0x2) + break; + } //switch(i_ADDIDATAType) + break; + case 2: + case 3: + i_APCI3200_InterruptHandleEos(dev); + break; + } //switch(i_ScanType) + return; +} + +/* + +----------------------------------------------------------------------------+ + | Function name :int i_APCI3200_InterruptHandleEos(comedi_device *dev) | + | | + | | + +----------------------------------------------------------------------------+ + | Task : . | + | This function copies the acquired data(from FIFO) | + | to Comedi buffer. | + | | + +----------------------------------------------------------------------------+ + | Input Parameters : comedi_device *dev | + | | + | | + +----------------------------------------------------------------------------+ + | Return Value : 0 | + | | + +----------------------------------------------------------------------------+ +*/ +int i_APCI3200_InterruptHandleEos(comedi_device * dev) +{ + UINT ui_StatusRegister = 0; + comedi_subdevice *s = dev->subdevices + 0; + + //BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 + //comedi_async *async = s->async; + //UINT *data; + //data=async->data+async->buf_int_ptr;//new samples added from here onwards + int n = 0, i = 0; + //END JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 + + /************************************/ + /*Read the interrupt status register */ + /************************************/ + //ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16); + ui_StatusRegister = + inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 16); + + /*************************/ + /*Test if interrupt occur */ + /*************************/ + + if ((ui_StatusRegister & 0x2) == 0x2) { + /*************************/ + /*Read the channel number */ + /*************************/ + //ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24); + //BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 + //This value is not used + //ui_ChannelNumber = inl(devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 24); + s->async->events = 0; + //END JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 + + /*************************************/ + /*Read the digital Analog Input value */ + /*************************************/ + + //data[i_Count] = inl(devpriv->iobase+i_Offset + 28); + //Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 + //data[s_BoardInfos [dev->minor].i_Count] = inl(devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 28); + s_BoardInfos[dev->minor].ui_ScanValueArray[s_BoardInfos[dev-> + minor].i_Count] = + inl(devpriv->iobase + + s_BoardInfos[dev->minor].i_Offset + 28); + //End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 + + //if((i_Count == (i_LastChannel-i_FirstChannel+3))) + if ((s_BoardInfos[dev->minor].i_Count == + (s_BoardInfos[dev->minor].i_LastChannel - + s_BoardInfos[dev->minor]. + i_FirstChannel + 3))) { + + //Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + s_BoardInfos[dev->minor].i_Count++; + + for (i = s_BoardInfos[dev->minor].i_FirstChannel; + i <= s_BoardInfos[dev->minor].i_LastChannel; + i++) { + i_APCI3200_GetChannelCalibrationValue(dev, i, + &s_BoardInfos[dev->minor]. + ui_ScanValueArray[s_BoardInfos[dev-> + minor].i_Count + ((i - + s_BoardInfos + [dev->minor]. + i_FirstChannel) + * 3)], + &s_BoardInfos[dev->minor]. + ui_ScanValueArray[s_BoardInfos[dev-> + minor].i_Count + ((i - + s_BoardInfos + [dev->minor]. + i_FirstChannel) + * 3) + 1], + &s_BoardInfos[dev->minor]. + ui_ScanValueArray[s_BoardInfos[dev-> + minor].i_Count + ((i - + s_BoardInfos + [dev->minor]. + i_FirstChannel) + * 3) + 2]); + } + + //End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + + //i_Count=-1; + + s_BoardInfos[dev->minor].i_Count = -1; + + //async->buf_int_count+=(i_LastChannel-i_FirstChannel+4)*sizeof(UINT); + //Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 + //async->buf_int_count+=(s_BoardInfos [dev->minor].i_LastChannel-s_BoardInfos [dev->minor].i_FirstChannel+4)*sizeof(UINT); + //End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 + //async->buf_int_ptr+=(i_LastChannel-i_FirstChannel+4)*sizeof(UINT); + //Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 + //async->buf_int_ptr+=(s_BoardInfos [dev->minor].i_LastChannel-s_BoardInfos [dev->minor].i_FirstChannel+4)*sizeof(UINT); + //comedi_eos(dev,s); + + // Set the event type (Comedi Buffer End Of Scan) + s->async->events |= COMEDI_CB_EOS; + + // Test if enougth memory is available and allocate it for 7 values + //n = comedi_buf_write_alloc(s->async, 7*sizeof(lsampl_t)); + n = comedi_buf_write_alloc(s->async, + (7 + 12) * sizeof(lsampl_t)); + + // If not enougth memory available, event is set to Comedi Buffer Errror + if (n > ((7 + 12) * sizeof(lsampl_t))) { + printk("\ncomedi_buf_write_alloc n = %i", n); + s->async->events |= COMEDI_CB_ERROR; + } + // Write all 7 scan values in the comedi buffer + comedi_buf_memcpy_to(s->async, 0, + (lsampl_t *) s_BoardInfos[dev->minor]. + ui_ScanValueArray, (7 + 12) * sizeof(lsampl_t)); + + // Update comedi buffer pinters indexes + comedi_buf_write_free(s->async, + (7 + 12) * sizeof(lsampl_t)); + + // Send events + comedi_event(dev, s); + //End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 + + //BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 + // + //if (s->async->buf_int_ptr>=s->async->data_len) // for buffer rool over + // { + // /* buffer rollover */ + // s->async->buf_int_ptr=0; + // comedi_eobuf(dev,s); + // } + //End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 + } + //i_Count++; + s_BoardInfos[dev->minor].i_Count++; + } + //i_InterruptFlag=0; + s_BoardInfos[dev->minor].i_InterruptFlag = 0; + return 0; +} --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.h @@ -0,0 +1,191 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ + +// Card Specific information +#define APCI3200_BOARD_VENDOR_ID 0x15B8 +//#define APCI3200_ADDRESS_RANGE 264 + +int MODULE_NO; +struct { + INT i_Gain; + INT i_Polarity; + INT i_OffsetRange; + INT i_Coupling; + INT i_SingleDiff; + INT i_AutoCalibration; + UINT ui_ReloadValue; + UINT ui_TimeUnitReloadVal; + INT i_Interrupt; + INT i_ModuleSelection; +} Config_Parameters_Module1, Config_Parameters_Module2, + Config_Parameters_Module3, Config_Parameters_Module4; + +//ANALOG INPUT RANGE +static const comedi_lrange range_apci3200_ai = { 8, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2), + BIP_RANGE(1), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2), + UNI_RANGE(1) + } +}; + +static const comedi_lrange range_apci3300_ai = { 4, { + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2), + UNI_RANGE(1) + } +}; + +//Analog Input related Defines +#define APCI3200_AI_OFFSET_GAIN 0 +#define APCI3200_AI_SC_TEST 4 +#define APCI3200_AI_IRQ 8 +#define APCI3200_AI_AUTOCAL 12 +#define APCI3200_RELOAD_CONV_TIME_VAL 32 +#define APCI3200_CONV_TIME_TIME_BASE 36 +#define APCI3200_RELOAD_DELAY_TIME_VAL 40 +#define APCI3200_DELAY_TIME_TIME_BASE 44 +#define APCI3200_AI_MODULE1 0 +#define APCI3200_AI_MODULE2 64 +#define APCI3200_AI_MODULE3 128 +#define APCI3200_AI_MODULE4 192 +#define TRUE 1 +#define FALSE 0 +#define APCI3200_AI_EOSIRQ 16 +#define APCI3200_AI_EOS 20 +#define APCI3200_AI_CHAN_ID 24 +#define APCI3200_AI_CHAN_VAL 28 +#define ANALOG_INPUT 0 +#define TEMPERATURE 1 +#define RESISTANCE 2 + +#define ENABLE_EXT_TRIG 1 +#define ENABLE_EXT_GATE 2 +#define ENABLE_EXT_TRIG_GATE 3 + +#define APCI3200_MAXVOLT 2.5 +#define ADDIDATA_GREATER_THAN_TEST 0 +#define ADDIDATA_LESS_THAN_TEST 1 + +#define ADDIDATA_UNIPOLAR 1 +#define ADDIDATA_BIPOLAR 2 + +//BEGIN JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values +#define MAX_MODULE 4 +//END JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + +typedef struct { + ULONG ul_NumberOfValue; + ULONG *pul_ResistanceValue; + ULONG *pul_TemperatureValue; +} str_ADDIDATA_RTDStruct, *pstr_ADDIDATA_RTDStruct; + +//BEGIN JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values +typedef struct { + // Begin JK 05/08/2003 change for Linux + unsigned long ul_CurrentSourceCJC; + unsigned long ul_CurrentSource[5]; + // End JK 05/08/2003 change for Linux + + // Begin CG 15/02/02 Rev 1.0 -> Rev 1.1 : Add Header Type 1 + unsigned long ul_GainFactor[8]; // Gain Factor + unsigned int w_GainValue[10]; + // End CG 15/02/02 Rev 1.0 -> Rev 1.1 : Add Header Type 1 +} str_Module; +//END JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + +//BEGIN JK 06.07.04: Management of sevrals boards +typedef struct { + INT i_CJCAvailable; + INT i_CJCPolarity; + INT i_CJCGain; + INT i_InterruptFlag; + INT i_ADDIDATAPolarity; + INT i_ADDIDATAGain; + INT i_AutoCalibration; + INT i_ADDIDATAConversionTime; + INT i_ADDIDATAConversionTimeUnit; + INT i_ADDIDATAType; + INT i_ChannelNo; + INT i_ChannelCount; + INT i_ScanType; + INT i_FirstChannel; + INT i_LastChannel; + INT i_Sum; + INT i_Offset; + UINT ui_Channel_num; + INT i_Count; + INT i_Initialised; + //UINT ui_InterruptChannelValue[96]; //Buffer + UINT ui_InterruptChannelValue[144]; //Buffer + BYTE b_StructInitialized; + //Begin JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 + lsampl_t ui_ScanValueArray[7 + 12]; // 7 is the maximal number of channels + //End JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 + + //Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + INT i_ConnectionType; + INT i_NbrOfModule; + str_Module s_Module[MAX_MODULE]; + //End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values +} str_BoardInfos; +//END JK 06.07.04: Management of sevrals boards + +// Hardware Layer functions for Apci3200 + +//AI + +INT i_APCI3200_ConfigAnalogInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +INT i_APCI3200_ReadAnalogInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +INT i_APCI3200_InsnWriteReleaseAnalogInput(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); +INT i_APCI3200_InsnBits_AnalogInput_Test(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); +INT i_APCI3200_StopCyclicAcquisition(comedi_device * dev, comedi_subdevice * s); +INT i_APCI3200_InterruptHandleEos(comedi_device * dev); +INT i_APCI3200_CommandTestAnalogInput(comedi_device * dev, comedi_subdevice * s, + comedi_cmd * cmd); +INT i_APCI3200_CommandAnalogInput(comedi_device * dev, comedi_subdevice * s); +INT i_APCI3200_ReadDigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +//Interrupt +void v_APCI3200_Interrupt(int irq, void *d); +int i_APCI3200_InterruptHandleEos(comedi_device * dev); +//Reset functions +INT i_APCI3200_Reset(comedi_device * dev); + +int i_APCI3200_ReadCJCCalOffset(comedi_device * dev, lsampl_t * data); +int i_APCI3200_ReadCJCValue(comedi_device * dev, lsampl_t * data); +int i_APCI3200_ReadCalibrationGainValue(comedi_device * dev, UINT * data); +int i_APCI3200_ReadCalibrationOffsetValue(comedi_device * dev, UINT * data); +int i_APCI3200_Read1AnalogInputChannel(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); +int i_APCI3200_ReadCJCCalGain(comedi_device * dev, lsampl_t * data); --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.c @@ -0,0 +1,742 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/*. + + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-------------------------------+---------------------------------------+ + | Project : APCI-3501 | Compiler : GCC | + | Module name : hwdrv_apci3501.c| Version : 2.96 | + +-------------------------------+---------------------------------------+ + | Project manager: Eric Stolz | Date : 02/12/2002 | + +-------------------------------+---------------------------------------+ + | Description : Hardware Layer Acces For APCI-3501 | + +-----------------------------------------------------------------------+ + | UPDATES | + +----------+-----------+------------------------------------------------+ + | Date | Author | Description of updates | + +----------+-----------+------------------------------------------------+ + | | | | + | | | | + | | | | + +----------+-----------+------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Included files | ++----------------------------------------------------------------------------+ +*/ +#include "hwdrv_apci3501.h" + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI3501_ReadDigitalInput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Read value of the selected channel or port | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT ui_NoOfChannels : No Of Channels To read | +| UINT *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ + +INT i_APCI3501_ReadDigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_Temp; + UINT ui_NoOfChannel; + ui_NoOfChannel = CR_CHAN(insn->chanspec); + ui_Temp = data[0]; + *data = inl(devpriv->iobase + APCI3501_DIGITAL_IP); + if (ui_Temp == 0) { + *data = (*data >> ui_NoOfChannel) & 0x1; + } //if (ui_Temp==0) + else { + if (ui_Temp == 1) { + + *data = *data & 0x3; + } //if (ui_Temp==1) + else { + printk("\nSpecified channel not supported \n"); + } //elseif (ui_Temp==1) + } //elseif (ui_Temp==0) + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI3501_ConfigDigitalOutput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Configures The Digital Output Subdevice. | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT *data : Data Pointer contains | +| configuration parameters as below | +| | +| data[1] : 1 Enable VCC Interrupt | +| 0 Disable VCC Interrupt | +| data[2] : 1 Enable CC Interrupt | +| 0 Disable CC Interrupt | +| | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +int i_APCI3501_ConfigDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + + if ((data[0] != 0) && (data[0] != 1)) { + comedi_error(dev, + "Not a valid Data !!! ,Data should be 1 or 0\n"); + return -EINVAL; + } //if ( (data[0]!=0) && (data[0]!=1) ) + if (data[0]) { + devpriv->b_OutputMemoryStatus = ADDIDATA_ENABLE; + } // if (data[0]) + else { + devpriv->b_OutputMemoryStatus = ADDIDATA_DISABLE; + } //else if (data[0]) + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI3501_WriteDigitalOutput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : writes To the digital Output Subdevice | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| comedi_subdevice *s : Subdevice Pointer | +| comedi_insn *insn : Insn Structure Pointer | +| lsampl_t *data : Data Pointer contains | +| configuration parameters as below | +| | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI3501_WriteDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_Temp, ui_Temp1; + UINT ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel + if (devpriv->b_OutputMemoryStatus) { + ui_Temp = inl(devpriv->iobase + APCI3501_DIGITAL_OP); + } //if(devpriv->b_OutputMemoryStatus ) + else { + ui_Temp = 0; + } //if(devpriv->b_OutputMemoryStatus ) + if (data[3] == 0) { + if (data[1] == 0) { + data[0] = (data[0] << ui_NoOfChannel) | ui_Temp; + outl(data[0], devpriv->iobase + APCI3501_DIGITAL_OP); + } //if(data[1]==0) + else { + if (data[1] == 1) { + data[0] = (data[0] << (2 * data[2])) | ui_Temp; + outl(data[0], + devpriv->iobase + APCI3501_DIGITAL_OP); + } // if(data[1]==1) + else { + printk("\nSpecified channel not supported\n"); + } //else if(data[1]==1) + } //elseif(data[1]==0) + } //if(data[3]==0) + else { + if (data[3] == 1) { + if (data[1] == 0) { + data[0] = ~data[0] & 0x1; + ui_Temp1 = 1; + ui_Temp1 = ui_Temp1 << ui_NoOfChannel; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = + (data[0] << ui_NoOfChannel) ^ + 0xffffffff; + data[0] = data[0] & ui_Temp; + outl(data[0], + devpriv->iobase + APCI3501_DIGITAL_OP); + } //if(data[1]==0) + else { + if (data[1] == 1) { + data[0] = ~data[0] & 0x3; + ui_Temp1 = 3; + ui_Temp1 = ui_Temp1 << 2 * data[2]; + ui_Temp = ui_Temp | ui_Temp1; + data[0] = + ((data[0] << (2 * + data[2])) ^ + 0xffffffff) & ui_Temp; + outl(data[0], + devpriv->iobase + + APCI3501_DIGITAL_OP); + } // if(data[1]==1) + else { + printk("\nSpecified channel not supported\n"); + } //else if(data[1]==1) + } //elseif(data[1]==0) + } //if(data[3]==1); + else { + printk("\nSpecified functionality does not exist\n"); + return -EINVAL; + } //if else data[3]==1) + } //if else data[3]==0) + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI3501_ReadDigitalOutput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Read value of the selected channel or port | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT ui_NoOfChannels : No Of Channels To read | +| UINT *data : Data Pointer to read status | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI3501_ReadDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + UINT ui_Temp; + UINT ui_NoOfChannel; + + ui_NoOfChannel = CR_CHAN(insn->chanspec); + ui_Temp = data[0]; + *data = inl(devpriv->iobase + APCI3501_DIGITAL_OP); + if (ui_Temp == 0) { + *data = (*data >> ui_NoOfChannel) & 0x1; + } // if (ui_Temp==0) + else { + if (ui_Temp == 1) { + *data = *data & 0x3; + + } // if (ui_Temp==1) + else { + printk("\nSpecified channel not supported \n"); + } // else if (ui_Temp==1) + } // else if (ui_Temp==0) + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI3501_ConfigAnalogOutput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Configures The Analog Output Subdevice | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| comedi_subdevice *s : Subdevice Pointer | +| comedi_insn *insn : Insn Structure Pointer | +| lsampl_t *data : Data Pointer contains | +| configuration parameters as below | +| | +| data[0] : Voltage Mode | +| 0:Mode 0 | +| 1:Mode 1 | +| | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI3501_ConfigAnalogOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + outl(data[0], + devpriv->iobase + APCI3501_ANALOG_OUTPUT + + APCI3501_AO_VOLT_MODE); + + if (data[0]) { + devpriv->b_InterruptMode = MODE1; + } else { + devpriv->b_InterruptMode = MODE0; + } + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI3501_WriteAnalogOutput | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Writes To the Selected Anlog Output Channel | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| comedi_subdevice *s : Subdevice Pointer | +| comedi_insn *insn : Insn Structure Pointer | +| lsampl_t *data : Data Pointer contains | +| configuration parameters as below | +| | +| | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI3501_WriteAnalogOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + ULONG ul_Command1 = 0, ul_Channel_no, ul_Polarity, ul_DAC_Ready = 0;; + + ul_Channel_no = CR_CHAN(insn->chanspec); + + if (devpriv->b_InterruptMode == MODE1) { + ul_Polarity = 0x80000000; + if ((*data < 0) || (*data > 16384)) { + printk("\nIn WriteAnalogOutput :: Not Valid Data\n"); + } + + } // end if(devpriv->b_InterruptMode==MODE1) + else { + ul_Polarity = 0; + if ((*data < 0) || (*data > 8192)) { + printk("\nIn WriteAnalogOutput :: Not Valid Data\n"); + } + + } // end else + + if ((ul_Channel_no < 0) || (ul_Channel_no > 7)) { + printk("\nIn WriteAnalogOutput :: Not Valid Channel\n"); + } // end if((ul_Channel_no<0)||(ul_Channel_no>7)) + + ul_DAC_Ready = inl(devpriv->iobase + APCI3501_ANALOG_OUTPUT); + + while (ul_DAC_Ready == 0) { + ul_DAC_Ready = inl(devpriv->iobase + APCI3501_ANALOG_OUTPUT); + ul_DAC_Ready = (ul_DAC_Ready >> 8) & 1; + } + + if (ul_DAC_Ready) { +// Output the Value on the output channels. + ul_Command1 = + (ULONG) ((ULONG) (ul_Channel_no & 0xFF) | + (ULONG) ((*data << 0x8) & 0x7FFFFF00L) | + (ULONG) (ul_Polarity)); + outl(ul_Command1, + devpriv->iobase + APCI3501_ANALOG_OUTPUT + + APCI3501_AO_PROG); + } + + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI3501_ConfigTimerCounterWatchdog | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Configures The Timer , Counter or Watchdog | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT *data : Data Pointer contains | +| configuration parameters as below | +| | +| data[0] : 0 Configure As Timer | +| 1 Configure As Counter | +| 2 Configure As Watchdog | +| data[1] : 1 Enable Interrupt | +| 0 Disable Interrupt | +| data[2] : Time Unit | +| data[3] : Reload Value | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +INT i_APCI3501_ConfigTimerCounterWatchdog(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + ULONG ul_Command1 = 0; + devpriv->tsk_Current = current; + if (data[0] == ADDIDATA_WATCHDOG) { + + devpriv->b_TimerSelectMode = ADDIDATA_WATCHDOG; + //Disable the watchdog + outl(0x0, devpriv->iobase + APCI3501_WATCHDOG + APCI3501_TCW_PROG); //disable Wa + + if (data[1] == 1) { + //Enable TIMER int & DISABLE ALL THE OTHER int SOURCES + outl(0x02, + devpriv->iobase + APCI3501_WATCHDOG + + APCI3501_TCW_PROG); + } else { + outl(0x0, devpriv->iobase + APCI3501_WATCHDOG + APCI3501_TCW_PROG); //disable Timer interrupt + } + + //Loading the Timebase value + outl(data[2], + devpriv->iobase + APCI3501_WATCHDOG + + APCI3501_TCW_TIMEBASE); + + //Loading the Reload value + outl(data[3], + devpriv->iobase + APCI3501_WATCHDOG + + APCI3501_TCW_RELOAD_VALUE); + //Set the mode + ul_Command1 = inl(devpriv->iobase + APCI3501_WATCHDOG + APCI3501_TCW_PROG) | 0xFFF819E0UL; //e2->e0 + outl(ul_Command1, + devpriv->iobase + APCI3501_WATCHDOG + + APCI3501_TCW_PROG); + } //end if(data[0]==ADDIDATA_WATCHDOG) + + else if (data[0] == ADDIDATA_TIMER) { + //First Stop The Timer + ul_Command1 = + inl(devpriv->iobase + APCI3501_WATCHDOG + + APCI3501_TCW_PROG); + ul_Command1 = ul_Command1 & 0xFFFFF9FEUL; + outl(ul_Command1, devpriv->iobase + APCI3501_WATCHDOG + APCI3501_TCW_PROG); //Stop The Timer + devpriv->b_TimerSelectMode = ADDIDATA_TIMER; + if (data[1] == 1) { + //Enable TIMER int & DISABLE ALL THE OTHER int SOURCES + outl(0x02, + devpriv->iobase + APCI3501_WATCHDOG + + APCI3501_TCW_PROG); + } else { + outl(0x0, devpriv->iobase + APCI3501_WATCHDOG + APCI3501_TCW_PROG); //disable Timer interrupt + } + + // Loading Timebase + outl(data[2], + devpriv->iobase + APCI3501_WATCHDOG + + APCI3501_TCW_TIMEBASE); + + //Loading the Reload value + outl(data[3], + devpriv->iobase + APCI3501_WATCHDOG + + APCI3501_TCW_RELOAD_VALUE); + + // printk ("\nTimer Address :: %x\n", (devpriv->iobase+APCI3501_WATCHDOG)); + ul_Command1 = + inl(devpriv->iobase + APCI3501_WATCHDOG + + APCI3501_TCW_PROG); + ul_Command1 = + (ul_Command1 & 0xFFF719E2UL) | 2UL << 13UL | 0x10UL; + outl(ul_Command1, devpriv->iobase + APCI3501_WATCHDOG + APCI3501_TCW_PROG); //mode 2 + + } //end if(data[0]==ADDIDATA_TIMER) + + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI3501_StartStopWriteTimerCounterWatchdog | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Start / Stop The Selected Timer , Counter or Watchdog | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT *data : Data Pointer contains | +| configuration parameters as below | +| | +| data[0] : 0 Timer | +| 1 Counter | +| 2 Watchdog | | data[1] : 1 Start | +| 0 Stop | 2 Trigger | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3501_StartStopWriteTimerCounterWatchdog(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + ULONG ul_Command1 = 0; + int i_Temp; + if (devpriv->b_TimerSelectMode == ADDIDATA_WATCHDOG) { + + if (data[1] == 1) { + ul_Command1 = + inl(devpriv->iobase + APCI3501_WATCHDOG + + APCI3501_TCW_PROG); + ul_Command1 = (ul_Command1 & 0xFFFFF9FFUL) | 0x1UL; + //Enable the Watchdog + outl(ul_Command1, + devpriv->iobase + APCI3501_WATCHDOG + + APCI3501_TCW_PROG); + } + + else if (data[1] == 0) //Stop The Watchdog + { + //Stop The Watchdog + ul_Command1 = + inl(devpriv->iobase + APCI3501_WATCHDOG + + APCI3501_TCW_PROG); + ul_Command1 = ul_Command1 & 0xFFFFF9FEUL; + outl(0x0, + devpriv->iobase + APCI3501_WATCHDOG + + APCI3501_TCW_PROG); + } else if (data[1] == 2) { + ul_Command1 = + inl(devpriv->iobase + APCI3501_WATCHDOG + + APCI3501_TCW_PROG); + ul_Command1 = (ul_Command1 & 0xFFFFF9FFUL) | 0x200UL; + outl(ul_Command1, + devpriv->iobase + APCI3501_WATCHDOG + + APCI3501_TCW_PROG); + } //if(data[1]==2) + } // end if (devpriv->b_TimerSelectMode==ADDIDATA_WATCHDOG) + + if (devpriv->b_TimerSelectMode == ADDIDATA_TIMER) { + if (data[1] == 1) { + + ul_Command1 = + inl(devpriv->iobase + APCI3501_WATCHDOG + + APCI3501_TCW_PROG); + ul_Command1 = (ul_Command1 & 0xFFFFF9FFUL) | 0x1UL; + //Enable the Timer + outl(ul_Command1, + devpriv->iobase + APCI3501_WATCHDOG + + APCI3501_TCW_PROG); + } else if (data[1] == 0) { + //Stop The Timer + ul_Command1 = + inl(devpriv->iobase + APCI3501_WATCHDOG + + APCI3501_TCW_PROG); + ul_Command1 = ul_Command1 & 0xFFFFF9FEUL; + outl(ul_Command1, + devpriv->iobase + APCI3501_WATCHDOG + + APCI3501_TCW_PROG); + } + + else if (data[1] == 2) { + //Trigger the Timer + ul_Command1 = + inl(devpriv->iobase + APCI3501_WATCHDOG + + APCI3501_TCW_PROG); + ul_Command1 = (ul_Command1 & 0xFFFFF9FFUL) | 0x200UL; + outl(ul_Command1, + devpriv->iobase + APCI3501_WATCHDOG + + APCI3501_TCW_PROG); + } + + } // end if (devpriv->b_TimerSelectMode==ADDIDATA_TIMER) + i_Temp = inl(devpriv->iobase + APCI3501_WATCHDOG + + APCI3501_TCW_TRIG_STATUS) & 0x1; + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI3501_ReadTimerCounterWatchdog | +| (comedi_device *dev,comedi_subdevice *s, | +| comedi_insn *insn,lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Read The Selected Timer , Counter or Watchdog | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev : Driver handle | +| UINT *data : Data Pointer contains | +| configuration parameters as below | +| | +| data[0] : 0 Timer | +| 1 Counter | +| 2 Watchdog | | data[1] : Timer Counter Watchdog Number | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3501_ReadTimerCounterWatchdog(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + + if (devpriv->b_TimerSelectMode == ADDIDATA_WATCHDOG) { + data[0] = + inl(devpriv->iobase + APCI3501_WATCHDOG + + APCI3501_TCW_TRIG_STATUS) & 0x1; + data[1] = inl(devpriv->iobase + APCI3501_WATCHDOG); + } // end if (devpriv->b_TimerSelectMode==ADDIDATA_WATCHDOG) + + else if (devpriv->b_TimerSelectMode == ADDIDATA_TIMER) { + data[0] = + inl(devpriv->iobase + APCI3501_WATCHDOG + + APCI3501_TCW_TRIG_STATUS) & 0x1; + data[1] = inl(devpriv->iobase + APCI3501_WATCHDOG); + } // end if (devpriv->b_TimerSelectMode==ADDIDATA_TIMER) + + else if ((devpriv->b_TimerSelectMode != ADDIDATA_TIMER) + && (devpriv->b_TimerSelectMode != ADDIDATA_WATCHDOG)) { + printk("\nIn ReadTimerCounterWatchdog :: Invalid Subdevice \n"); + } + return insn->n; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI3501_Reset(comedi_device *dev) | +| | ++----------------------------------------------------------------------------+ +| Task :Resets the registers of the card | ++----------------------------------------------------------------------------+ +| Input Parameters : | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : | +| | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3501_Reset(comedi_device * dev) +{ + int i_Count = 0, i_temp = 0; + ULONG ul_Command1 = 0, ul_Polarity, ul_DAC_Ready = 0; + outl(0x0, devpriv->iobase + APCI3501_DIGITAL_OP); + outl(1, devpriv->iobase + APCI3501_ANALOG_OUTPUT + + APCI3501_AO_VOLT_MODE); + + ul_Polarity = 0x80000000; + + for (i_Count = 0; i_Count <= 7; i_Count++) { + ul_DAC_Ready = inl(devpriv->iobase + APCI3501_ANALOG_OUTPUT); + + while (ul_DAC_Ready == 0) { + ul_DAC_Ready = + inl(devpriv->iobase + APCI3501_ANALOG_OUTPUT); + ul_DAC_Ready = (ul_DAC_Ready >> 8) & 1; + } + + if (ul_DAC_Ready) { + // Output the Value on the output channels. + ul_Command1 = + (ULONG) ((ULONG) (i_Count & 0xFF) | + (ULONG) ((i_temp << 0x8) & 0x7FFFFF00L) | + (ULONG) (ul_Polarity)); + outl(ul_Command1, + devpriv->iobase + APCI3501_ANALOG_OUTPUT + + APCI3501_AO_PROG); + } + } + + return 0; +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : static void v_APCI3501_Interrupt | +| (int irq , void *d) | ++----------------------------------------------------------------------------+ +| Task : Interrupt processing Routine | ++----------------------------------------------------------------------------+ +| Input Parameters : int irq : irq number | +| void *d : void pointer | ++----------------------------------------------------------------------------+ +| Output Parameters : -- | ++----------------------------------------------------------------------------+ +| Return Value : TRUE : No error occur | +| : FALSE : Error occur. Return the error | +| | ++----------------------------------------------------------------------------+ +*/ +void v_APCI3501_Interrupt(int irq, void *d) +{ + int i_temp; + comedi_device *dev = d; + unsigned int ui_Timer_AOWatchdog; + unsigned long ul_Command1; + // Disable Interrupt + ul_Command1 = + inl(devpriv->iobase + APCI3501_WATCHDOG + APCI3501_TCW_PROG); + + ul_Command1 = (ul_Command1 & 0xFFFFF9FDul); + outl(ul_Command1, + devpriv->iobase + APCI3501_WATCHDOG + APCI3501_TCW_PROG); + + ui_Timer_AOWatchdog = + inl(devpriv->iobase + APCI3501_WATCHDOG + + APCI3501_TCW_IRQ) & 0x1; + + if ((!ui_Timer_AOWatchdog)) { + comedi_error(dev, "IRQ from unknow source"); + return; + } + + // Enable Interrupt + //Send a signal to from kernel to user space + send_sig(SIGIO, devpriv->tsk_Current, 0); + ul_Command1 = + inl(devpriv->iobase + APCI3501_WATCHDOG + APCI3501_TCW_PROG); + ul_Command1 = ((ul_Command1 & 0xFFFFF9FDul) | 1 << 1); + outl(ul_Command1, + devpriv->iobase + APCI3501_WATCHDOG + APCI3501_TCW_PROG); + i_temp = inl(devpriv->iobase + APCI3501_WATCHDOG + + APCI3501_TCW_TRIG_STATUS) & 0x1; + return; +} --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.h @@ -0,0 +1,96 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +// Card Specific information +#define APCI3501_BOARD_VENDOR_ID 0x15B8 +#define APCI3501_ADDRESS_RANGE 255 + +#define APCI3501_DIGITAL_IP 0x50 +#define APCI3501_DIGITAL_OP 0x40 +#define APCI3501_ANALOG_OUTPUT 0x00 + +//Analog Output related Defines +#define APCI3501_AO_VOLT_MODE 0 +#define APCI3501_AO_PROG 4 +#define APCI3501_AO_TRIG_SCS 8 +#define UNIPOLAR 0 +#define BIPOLAR 1 +#define MODE0 0 +#define MODE1 1 +// ANALOG OUTPUT RANGE +comedi_lrange range_apci3501_ao = { 2, { + BIP_RANGE(10), + UNI_RANGE(10) + } +}; + +//Watchdog Related Defines + +#define APCI3501_WATCHDOG 0x20 +#define APCI3501_TCW_SYNC_ENABLEDISABLE 0 +#define APCI3501_TCW_RELOAD_VALUE 4 +#define APCI3501_TCW_TIMEBASE 8 +#define APCI3501_TCW_PROG 12 +#define APCI3501_TCW_TRIG_STATUS 16 +#define APCI3501_TCW_IRQ 20 +#define APCI3501_TCW_WARN_TIMEVAL 24 +#define APCI3501_TCW_WARN_TIMEBASE 28 +#define ADDIDATA_TIMER 0 +#define ADDIDATA_WATCHDOG 2 + +// Hardware Layer functions for Apci3501 + +//AO +INT i_APCI3501_ConfigAnalogOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +INT i_APCI3501_WriteAnalogOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +//DI +// for di read +//INT i_APCI3501_ReadDigitalInput(comedi_device *dev,comedi_subdevice *s,comedi_insn *insn,lsampl_t *data); + +INT i_APCI3501_ReadDigitalInput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +//DO +int i_APCI3501_ConfigDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +INT i_APCI3501_WriteDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +INT i_APCI3501_ReadDigitalOutput(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +// TIMER +// timer value is passed as u seconds +INT i_APCI3501_ConfigTimerCounterWatchdog(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); +int i_APCI3501_StartStopWriteTimerCounterWatchdog(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); +int i_APCI3501_ReadTimerCounterWatchdog(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); +//Interrupt +void v_APCI3501_Interrupt(int irq, void *d); + +//Reset functions +int i_APCI3501_Reset(comedi_device * dev); --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.c @@ -0,0 +1,1691 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ +/* + +-----------------------------------------------------------------------+ + | (C) ADDI-DATA GmbH Dieselstrasse 3 D-77833 Ottersweier | + +-----------------------------------------------------------------------+ + | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | + | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | + +-----------------------------------------------------------------------+ + | Project : APCI-3XXX | Compiler : GCC | + | Module name : hwdrv_apci3xxx.c| Version : 2.96 | + +-------------------------------+---------------------------------------+ + | Project manager: S. Weber | Date : 15/09/2005 | + +-----------------------------------------------------------------------+ + | Description :APCI3XXX Module. Hardware abstraction Layer for APCI3XXX| + +-----------------------------------------------------------------------+ + | UPDATE'S | + +-----------------------------------------------------------------------+ + | Date | Author | Description of updates | + +----------+-----------+------------------------------------------------+ + | | | | + | | | | + +----------+-----------+------------------------------------------------+ +*/ + +#include "hwdrv_apci3xxx.h" + +/* ++----------------------------------------------------------------------------+ +| ANALOG INPUT FUNCTIONS | ++----------------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Function Name : INT i_APCI3XXX_TestConversionStarted | +| (comedi_device *dev) | ++----------------------------------------------------------------------------+ +| Task Test if any conversion started | ++----------------------------------------------------------------------------+ +| Input Parameters : - | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0 : Conversion not started | +| 1 : Conversion started | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3XXX_TestConversionStarted(comedi_device * dev) +{ + if ((readl((void *)(devpriv->dw_AiBase + 8)) & 0x80000UL) == 0x80000UL) { + return (1); + } else { + return (0); + } +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : INT i_APCI3XXX_AnalogInputConfigOperatingMode | +| (comedi_device *dev, | +| comedi_subdevice *s, | +| comedi_insn *insn, | +| lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task Converting mode and convert time selection | ++----------------------------------------------------------------------------+ +| Input Parameters : b_SingleDiff = (BYTE) data[1]; | +| b_TimeBase = (BYTE) data[2]; (0: ns, 1:micros 2:ms)| +| dw_ReloadValue = (DWORD) data[3]; | +| ........ | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value :>0 : No error | +| -1 : Single/Diff selection error | +| -2 : Convert time base unity selection error | +| -3 : Convert time value selection error | +| -10: Any conversion started | +| .... | +| -100 : Config command error | +| -101 : Data size error | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3XXX_AnalogInputConfigOperatingMode(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = insn->n; + BYTE b_TimeBase = 0; + BYTE b_SingleDiff = 0; + DWORD dw_ReloadValue = 0; + DWORD dw_TestReloadValue = 0; + + /************************/ + /* Test the buffer size */ + /************************/ + + if (insn->n == 4) { + /****************************/ + /* Get the Singel/Diff flag */ + /****************************/ + + b_SingleDiff = (BYTE) data[1]; + + /****************************/ + /* Get the time base unitiy */ + /****************************/ + + b_TimeBase = (BYTE) data[2]; + + /*************************************/ + /* Get the convert time reload value */ + /*************************************/ + + dw_ReloadValue = (DWORD) data[3]; + + /**********************/ + /* Test the time base */ + /**********************/ + + if ((devpriv->ps_BoardInfo-> + b_AvailableConvertUnit & (1 << b_TimeBase)) != + 0) { + /*******************************/ + /* Test the convert time value */ + /*******************************/ + + if ((dw_ReloadValue >= 0) && (dw_ReloadValue <= 65535)) { + dw_TestReloadValue = dw_ReloadValue; + + if (b_TimeBase == 1) { + dw_TestReloadValue = + dw_TestReloadValue * 1000UL; + } + if (b_TimeBase == 2) { + dw_TestReloadValue = + dw_TestReloadValue * 1000000UL; + } + + /*******************************/ + /* Test the convert time value */ + /*******************************/ + + if (dw_TestReloadValue >= + devpriv->ps_BoardInfo-> + ui_MinAcquisitiontimeNs) { + if ((b_SingleDiff == APCI3XXX_SINGLE) + || (b_SingleDiff == + APCI3XXX_DIFF)) { + if (((b_SingleDiff == APCI3XXX_SINGLE) && (devpriv->ps_BoardInfo->i_NbrAiChannel == 0)) || ((b_SingleDiff == APCI3XXX_DIFF) && (devpriv->ps_BoardInfo->i_NbrAiChannelDiff == 0))) { + /*******************************/ + /* Single/Diff selection error */ + /*******************************/ + + printk("Single/Diff selection error\n"); + i_ReturnValue = -1; + } else { + /**********************************/ + /* Test if conversion not started */ + /**********************************/ + + if (i_APCI3XXX_TestConversionStarted(dev) == 0) { + devpriv-> + ui_EocEosConversionTime + = + (UINT) + dw_ReloadValue; + devpriv-> + b_EocEosConversionTimeBase + = + b_TimeBase; + devpriv-> + b_SingelDiff + = + b_SingleDiff; + devpriv-> + b_AiInitialisation + = 1; + + /*******************************/ + /* Set the convert timing unit */ + /*******************************/ + + writel((DWORD) + b_TimeBase, + (void *) + (devpriv-> + dw_AiBase + + + 36)); + + /**************************/ + /* Set the convert timing */ + /*************************/ + + writel(dw_ReloadValue, (void *)(devpriv->dw_AiBase + 32)); + } else { + /**************************/ + /* Any conversion started */ + /**************************/ + + printk("Any conversion started\n"); + i_ReturnValue = + -10; + } + } + } else { + /*******************************/ + /* Single/Diff selection error */ + /*******************************/ + + printk("Single/Diff selection error\n"); + i_ReturnValue = -1; + } + } else { + /************************/ + /* Time selection error */ + /************************/ + + printk("Convert time value selection error\n"); + i_ReturnValue = -3; + } + } else { + /************************/ + /* Time selection error */ + /************************/ + + printk("Convert time value selection error\n"); + i_ReturnValue = -3; + } + } else { + /*****************************/ + /* Time base selection error */ + /*****************************/ + + printk("Convert time base unity selection error\n"); + i_ReturnValue = -2; + } + } else { + /*******************/ + /* Data size error */ + /*******************/ + + printk("Buffer size error\n"); + i_ReturnValue = -101; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : INT i_APCI3XXX_InsnConfigAnalogInput | +| (comedi_device *dev, | +| comedi_subdevice *s, | +| comedi_insn *insn, | +| lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task Converting mode and convert time selection | ++----------------------------------------------------------------------------+ +| Input Parameters : b_ConvertMode = (BYTE) data[0]; | +| b_TimeBase = (BYTE) data[1]; (0: ns, 1:micros 2:ms)| +| dw_ReloadValue = (DWORD) data[2]; | +| ........ | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value :>0: No error | +| .... | +| -100 : Config command error | +| -101 : Data size error | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3XXX_InsnConfigAnalogInput(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = insn->n; + + /************************/ + /* Test the buffer size */ + /************************/ + + if (insn->n >= 1) { + switch ((BYTE) data[0]) { + case APCI3XXX_CONFIGURATION: + i_ReturnValue = + i_APCI3XXX_AnalogInputConfigOperatingMode(dev, + s, insn, data); + break; + + default: + i_ReturnValue = -100; + printk("Config command error %d\n", data[0]); + break; + } + } else { + /*******************/ + /* Data size error */ + /*******************/ + + printk("Buffer size error\n"); + i_ReturnValue = -101; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : INT i_APCI3XXX_InsnReadAnalogInput | +| (comedi_device *dev, | +| comedi_subdevice *s, | +| comedi_insn *insn, | +| lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task Read 1 analog input | ++----------------------------------------------------------------------------+ +| Input Parameters : b_Range = CR_RANGE(insn->chanspec); | +| b_Channel = CR_CHAN(insn->chanspec); | +| dw_NbrOfAcquisition = insn->n; | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value :>0: No error | +| -3 : Channel selection error | +| -4 : Configuration selelection error | +| -10: Any conversion started | +| .... | +| -100 : Config command error | +| -101 : Data size error | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3XXX_InsnReadAnalogInput(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = insn->n; + BYTE b_Configuration = (BYTE) CR_RANGE(insn->chanspec); + BYTE b_Channel = (BYTE) CR_CHAN(insn->chanspec); + DWORD dw_Temp = 0; + DWORD dw_Configuration = 0; + DWORD dw_AcquisitionCpt = 0; + BYTE b_Interrupt = 0; + + /*************************************/ + /* Test if operating mode configured */ + /*************************************/ + + if (devpriv->b_AiInitialisation) { + /***************************/ + /* Test the channel number */ + /***************************/ + + if (((b_Channel < devpriv->ps_BoardInfo->i_NbrAiChannel) + && (devpriv->b_SingelDiff == APCI3XXX_SINGLE)) + || ((b_Channel < devpriv->ps_BoardInfo-> + i_NbrAiChannelDiff) + && (devpriv->b_SingelDiff == APCI3XXX_DIFF))) { + /**********************************/ + /* Test the channel configuration */ + /**********************************/ + + if (b_Configuration > 7) { + /***************************/ + /* Channel not initialised */ + /***************************/ + + i_ReturnValue = -4; + printk("Channel %d range %d selection error\n", + b_Channel, b_Configuration); + } + } else { + /***************************/ + /* Channel selection error */ + /***************************/ + + i_ReturnValue = -3; + printk("Channel %d selection error\n", b_Channel); + } + + /**************************/ + /* Test if no error occur */ + /**************************/ + + if (i_ReturnValue >= 0) { + /************************/ + /* Test the buffer size */ + /************************/ + + if ((b_Interrupt != 0) || ((b_Interrupt == 0) + && (insn->n >= 1))) { + /**********************************/ + /* Test if conversion not started */ + /**********************************/ + + if (i_APCI3XXX_TestConversionStarted(dev) == 0) { + /******************/ + /* Clear the FIFO */ + /******************/ + + writel(0x10000UL, + (void *)(devpriv->dw_AiBase + + 12)); + + /*******************************/ + /* Get and save the delay mode */ + /*******************************/ + + dw_Temp = + readl((void *)(devpriv-> + dw_AiBase + 4)); + dw_Temp = dw_Temp & 0xFFFFFEF0UL; + + /***********************************/ + /* Channel configuration selection */ + /***********************************/ + + writel(dw_Temp, + (void *)(devpriv->dw_AiBase + + 4)); + + /**************************/ + /* Make the configuration */ + /**************************/ + + dw_Configuration = + (b_Configuration & 3) | + ((DWORD) (b_Configuration >> 2) + << 6) | ((DWORD) devpriv-> + b_SingelDiff << 7); + + /***************************/ + /* Write the configuration */ + /***************************/ + + writel(dw_Configuration, + (void *)(devpriv->dw_AiBase + + 0)); + + /*********************/ + /* Channel selection */ + /*********************/ + + writel(dw_Temp | 0x100UL, + (void *)(devpriv->dw_AiBase + + 4)); + writel((DWORD) b_Channel, + (void *)(devpriv->dw_AiBase + + 0)); + + /***********************/ + /* Restaure delay mode */ + /***********************/ + + writel(dw_Temp, + (void *)(devpriv->dw_AiBase + + 4)); + + /***********************************/ + /* Set the number of sequence to 1 */ + /***********************************/ + + writel(1, + (void *)(devpriv->dw_AiBase + + 48)); + + /***************************/ + /* Save the interrupt flag */ + /***************************/ + + devpriv->b_EocEosInterrupt = + b_Interrupt; + + /*******************************/ + /* Save the number of channels */ + /*******************************/ + + devpriv->ui_AiNbrofChannels = 1; + + /******************************/ + /* Test if interrupt not used */ + /******************************/ + + if (b_Interrupt == 0) { + for (dw_AcquisitionCpt = 0; + dw_AcquisitionCpt < + insn->n; + dw_AcquisitionCpt++) { + /************************/ + /* Start the conversion */ + /************************/ + + writel(0x80000UL, + (void *) + (devpriv-> + dw_AiBase + + 8)); + + /****************/ + /* Wait the EOS */ + /****************/ + + do { + dw_Temp = + readl( + (void *) + (devpriv-> + dw_AiBase + + + 20)); + dw_Temp = + dw_Temp + & 1; + } + while (dw_Temp != 1); + + /*************************/ + /* Read the analog value */ + /*************************/ + + data[dw_AcquisitionCpt] + = + (lsampl_t) + readl((void + *) + (devpriv-> + dw_AiBase + + 28)); + } + } else { + /************************/ + /* Start the conversion */ + /************************/ + + writel(0x180000UL, + (void *)(devpriv-> + dw_AiBase + 8)); + } + } else { + /**************************/ + /* Any conversion started */ + /**************************/ + + printk("Any conversion started\n"); + i_ReturnValue = -10; + } + } else { + /*******************/ + /* Data size error */ + /*******************/ + + printk("Buffer size error\n"); + i_ReturnValue = -101; + } + } + } else { + /***************************/ + /* Channel selection error */ + /***************************/ + + printk("Operating mode not configured\n"); + i_ReturnValue = -1; + } + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function name : void v_APCI3XXX_Interrupt (int irq, | +| void *d) | ++----------------------------------------------------------------------------+ +| Task :Interrupt handler for APCI3XXX | +| When interrupt occurs this gets called. | +| First it finds which interrupt has been generated and | +| handles corresponding interrupt | ++----------------------------------------------------------------------------+ +| Input Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : - | ++----------------------------------------------------------------------------+ +*/ + +void v_APCI3XXX_Interrupt(int irq, void *d) +{ + comedi_device *dev = d; + BYTE b_CopyCpt = 0; + DWORD dw_Status = 0; + + /***************************/ + /* Test if interrupt occur */ + /***************************/ + + if (((dw_Status = readl((void *)(devpriv->dw_AiBase + 16))) & 0x2UL) == + 0x2UL) { + /***********************/ + /* Reset the interrupt */ + /***********************/ + + writel(dw_Status, (void *)(devpriv->dw_AiBase + 16)); + + /*****************************/ + /* Test if interrupt enabled */ + /*****************************/ + + if (devpriv->b_EocEosInterrupt == 1) { + /********************************/ + /* Read all analog inputs value */ + /********************************/ + + for (b_CopyCpt = 0; + b_CopyCpt < devpriv->ui_AiNbrofChannels; + b_CopyCpt++) { + devpriv->ui_AiReadData[b_CopyCpt] = + (UINT) readl((void *)(devpriv-> + dw_AiBase + 28)); + } + + /**************************/ + /* Set the interrupt flag */ + /**************************/ + + devpriv->b_EocEosInterrupt = 2; + + /**********************************************/ + /* Send a signal to from kernel to user space */ + /**********************************************/ + + send_sig(SIGIO, devpriv->tsk_Current, 0); + } + } +} + +/* ++----------------------------------------------------------------------------+ +| ANALOG OUTPUT SUBDEVICE | ++----------------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Function Name : INT i_APCI3XXX_InsnWriteAnalogOutput | +| (comedi_device *dev, | +| comedi_subdevice *s, | +| comedi_insn *insn, | +| lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task Read 1 analog input | ++----------------------------------------------------------------------------+ +| Input Parameters : b_Range = CR_RANGE(insn->chanspec); | +| b_Channel = CR_CHAN(insn->chanspec); | +| data[0] = analog value; | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value :>0: No error | +| -3 : Channel selection error | +| -4 : Configuration selelection error | +| .... | +| -101 : Data size error | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3XXX_InsnWriteAnalogOutput(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + BYTE b_Range = (BYTE) CR_RANGE(insn->chanspec); + BYTE b_Channel = (BYTE) CR_CHAN(insn->chanspec); + DWORD dw_Status = 0; + INT i_ReturnValue = insn->n; + + /************************/ + /* Test the buffer size */ + /************************/ + + if (insn->n >= 1) { + /***************************/ + /* Test the channel number */ + /***************************/ + + if (b_Channel < devpriv->ps_BoardInfo->i_NbrAoChannel) { + /**********************************/ + /* Test the channel configuration */ + /**********************************/ + + if (b_Range < 2) { + /***************************/ + /* Set the range selection */ + /***************************/ + + writel(b_Range, + (void *)(devpriv->dw_AiBase + 96)); + + /**************************************************/ + /* Write the analog value to the selected channel */ + /**************************************************/ + + writel((data[0] << 8) | b_Channel, + (void *)(devpriv->dw_AiBase + 100)); + + /****************************/ + /* Wait the end of transfer */ + /****************************/ + + do { + dw_Status = + readl((void *)(devpriv-> + dw_AiBase + 96)); + } + while ((dw_Status & 0x100) != 0x100); + } else { + /***************************/ + /* Channel not initialised */ + /***************************/ + + i_ReturnValue = -4; + printk("Channel %d range %d selection error\n", + b_Channel, b_Range); + } + } else { + /***************************/ + /* Channel selection error */ + /***************************/ + + i_ReturnValue = -3; + printk("Channel %d selection error\n", b_Channel); + } + } else { + /*******************/ + /* Data size error */ + /*******************/ + + printk("Buffer size error\n"); + i_ReturnValue = -101; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| TTL FUNCTIONS | ++----------------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Function Name : INT i_APCI3XXX_InsnConfigInitTTLIO | +| (comedi_device *dev, | +| comedi_subdevice *s, | +| comedi_insn *insn, | +| lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task You must calling this function be | +| for you call any other function witch access of TTL. | +| APCI3XXX_TTL_INIT_DIRECTION_PORT2(user inputs for direction)| ++----------------------------------------------------------------------------+ +| Input Parameters : b_InitType = (BYTE) data[0]; | +| b_Port2Mode = (BYTE) data[1]; | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value :>0: No error | +| -1: Port 2 mode selection is wrong | +| .... | +| -100 : Config command error | +| -101 : Data size error | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3XXX_InsnConfigInitTTLIO(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = insn->n; + BYTE b_Command = 0; + + /************************/ + /* Test the buffer size */ + /************************/ + + if (insn->n >= 1) { + /*******************/ + /* Get the command */ + /* **************** */ + + b_Command = (BYTE) data[0]; + + /********************/ + /* Test the command */ + /********************/ + + if (b_Command == APCI3XXX_TTL_INIT_DIRECTION_PORT2) { + /***************************************/ + /* Test the initialisation buffer size */ + /***************************************/ + + if ((b_Command == APCI3XXX_TTL_INIT_DIRECTION_PORT2) + && (insn->n != 2)) { + /*******************/ + /* Data size error */ + /*******************/ + + printk("Buffer size error\n"); + i_ReturnValue = -101; + } + } else { + /************************/ + /* Config command error */ + /************************/ + + printk("Command selection error\n"); + i_ReturnValue = -100; + } + } else { + /*******************/ + /* Data size error */ + /*******************/ + + printk("Buffer size error\n"); + i_ReturnValue = -101; + } + + /*********************************************************************************/ + /* Test if no error occur and APCI3XXX_TTL_INIT_DIRECTION_PORT2 command selected */ + /*********************************************************************************/ + + if ((i_ReturnValue >= 0) + && (b_Command == APCI3XXX_TTL_INIT_DIRECTION_PORT2)) { + /**********************/ + /* Test the direction */ + /**********************/ + + if ((data[1] == 0) || (data[1] == 0xFF)) { + /**************************/ + /* Save the configuration */ + /**************************/ + + devpriv->ul_TTLPortConfiguration[0] = + devpriv->ul_TTLPortConfiguration[0] | data[1]; + } else { + /************************/ + /* Port direction error */ + /************************/ + + printk("Port 2 direction selection error\n"); + i_ReturnValue = -1; + } + } + + /**************************/ + /* Test if no error occur */ + /**************************/ + + if (i_ReturnValue >= 0) { + /***********************************/ + /* Test if TTL port initilaisation */ + /***********************************/ + + if (b_Command == APCI3XXX_TTL_INIT_DIRECTION_PORT2) { + /*************************/ + /* Set the configuration */ + /*************************/ + + outl(data[1], devpriv->iobase + 224); + } + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| TTL INPUT FUNCTIONS | ++----------------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Function Name : INT i_APCI3XXX_InsnBitsTTLIO | +| (comedi_device *dev, | +| comedi_subdevice *s, | +| comedi_insn *insn, | +| lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Write the selected output mask and read the status from| +| all TTL channles | ++----------------------------------------------------------------------------+ +| Input Parameters : dw_ChannelMask = data [0]; | +| dw_BitMask = data [1]; | ++----------------------------------------------------------------------------+ +| Output Parameters : data[1] : All TTL channles states | ++----------------------------------------------------------------------------+ +| Return Value : >0 : No error | +| -4 : Channel mask error | +| -101 : Data size error | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3XXX_InsnBitsTTLIO(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = insn->n; + BYTE b_ChannelCpt = 0; + DWORD dw_ChannelMask = 0; + DWORD dw_BitMask = 0; + DWORD dw_Status = 0; + + /************************/ + /* Test the buffer size */ + /************************/ + + if (insn->n >= 2) { + /*******************************/ + /* Get the channe and bit mask */ + /*******************************/ + + dw_ChannelMask = data[0]; + dw_BitMask = data[1]; + + /*************************/ + /* Test the channel mask */ + /*************************/ + + if (((dw_ChannelMask & 0XFF00FF00) == 0) && + (((devpriv->ul_TTLPortConfiguration[0] & 0xFF) == 0xFF) + || (((devpriv->ul_TTLPortConfiguration[0] & + 0xFF) == 0) + && ((dw_ChannelMask & 0XFF0000) == + 0)))) { + /*********************************/ + /* Test if set/reset any channel */ + /*********************************/ + + if (dw_ChannelMask) { + /****************************************/ + /* Test if set/rest any port 0 channels */ + /****************************************/ + + if (dw_ChannelMask & 0xFF) { + /*******************************************/ + /* Read port 0 (first digital output port) */ + /*******************************************/ + + dw_Status = inl(devpriv->iobase + 80); + + for (b_ChannelCpt = 0; b_ChannelCpt < 8; + b_ChannelCpt++) { + if ((dw_ChannelMask >> + b_ChannelCpt) & + 1) { + dw_Status = + (dw_Status & + (0xFF - (1 << b_ChannelCpt))) | (dw_BitMask & (1 << b_ChannelCpt)); + } + } + + outl(dw_Status, devpriv->iobase + 80); + } + + /****************************************/ + /* Test if set/rest any port 2 channels */ + /****************************************/ + + if (dw_ChannelMask & 0xFF0000) { + dw_BitMask = dw_BitMask >> 16; + dw_ChannelMask = dw_ChannelMask >> 16; + + /********************************************/ + /* Read port 2 (second digital output port) */ + /********************************************/ + + dw_Status = inl(devpriv->iobase + 112); + + for (b_ChannelCpt = 0; b_ChannelCpt < 8; + b_ChannelCpt++) { + if ((dw_ChannelMask >> + b_ChannelCpt) & + 1) { + dw_Status = + (dw_Status & + (0xFF - (1 << b_ChannelCpt))) | (dw_BitMask & (1 << b_ChannelCpt)); + } + } + + outl(dw_Status, devpriv->iobase + 112); + } + } + + /*******************************************/ + /* Read port 0 (first digital output port) */ + /*******************************************/ + + data[1] = inl(devpriv->iobase + 80); + + /******************************************/ + /* Read port 1 (first digital input port) */ + /******************************************/ + + data[1] = data[1] | (inl(devpriv->iobase + 64) << 8); + + /************************/ + /* Test if port 2 input */ + /************************/ + + if ((devpriv->ul_TTLPortConfiguration[0] & 0xFF) == 0) { + data[1] = + data[1] | (inl(devpriv->iobase + + 96) << 16); + } else { + data[1] = + data[1] | (inl(devpriv->iobase + + 112) << 16); + } + } else { + /************************/ + /* Config command error */ + /************************/ + + printk("Channel mask error\n"); + i_ReturnValue = -4; + } + } else { + /*******************/ + /* Data size error */ + /*******************/ + + printk("Buffer size error\n"); + i_ReturnValue = -101; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : INT i_APCI3XXX_InsnReadTTLIO | +| (comedi_device *dev, | +| comedi_subdevice *s, | +| comedi_insn *insn, | +| lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Read the status from selected channel | ++----------------------------------------------------------------------------+ +| Input Parameters : b_Channel = CR_CHAN(insn->chanspec) | ++----------------------------------------------------------------------------+ +| Output Parameters : data[0] : Selected TTL channel state | ++----------------------------------------------------------------------------+ +| Return Value : 0 : No error | +| -3 : Channel selection error | +| -101 : Data size error | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3XXX_InsnReadTTLIO(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + BYTE b_Channel = (BYTE) CR_CHAN(insn->chanspec); + INT i_ReturnValue = insn->n; + lsampl_t *pls_ReadData = data; + + /************************/ + /* Test the buffer size */ + /************************/ + + if (insn->n >= 1) { + /***********************/ + /* Test if read port 0 */ + /***********************/ + + if (b_Channel < 8) { + /*******************************************/ + /* Read port 0 (first digital output port) */ + /*******************************************/ + + pls_ReadData[0] = inl(devpriv->iobase + 80); + pls_ReadData[0] = (pls_ReadData[0] >> b_Channel) & 1; + } else { + /***********************/ + /* Test if read port 1 */ + /***********************/ + + if ((b_Channel > 7) && (b_Channel < 16)) { + /******************************************/ + /* Read port 1 (first digital input port) */ + /******************************************/ + + pls_ReadData[0] = inl(devpriv->iobase + 64); + pls_ReadData[0] = + (pls_ReadData[0] >> (b_Channel - + 8)) & 1; + } else { + /***********************/ + /* Test if read port 2 */ + /***********************/ + + if ((b_Channel > 15) && (b_Channel < 24)) { + /************************/ + /* Test if port 2 input */ + /************************/ + + if ((devpriv->ul_TTLPortConfiguration[0] + & 0xFF) == 0) { + pls_ReadData[0] = + inl(devpriv->iobase + + 96); + pls_ReadData[0] = + (pls_ReadData[0] >> + (b_Channel - 16)) & 1; + } else { + pls_ReadData[0] = + inl(devpriv->iobase + + 112); + pls_ReadData[0] = + (pls_ReadData[0] >> + (b_Channel - 16)) & 1; + } + } else { + /***************************/ + /* Channel selection error */ + /***************************/ + + i_ReturnValue = -3; + printk("Channel %d selection error\n", + b_Channel); + } + } + } + } else { + /*******************/ + /* Data size error */ + /*******************/ + + printk("Buffer size error\n"); + i_ReturnValue = -101; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| TTL OUTPUT FUNCTIONS | ++----------------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Function Name : INT i_APCI3XXX_InsnWriteTTLIO | +| (comedi_device *dev, | +| comedi_subdevice *s, | +| comedi_insn *insn, | +| lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Set the state from TTL output channel | ++----------------------------------------------------------------------------+ +| Input Parameters : b_Channel = CR_CHAN(insn->chanspec) | +| b_State = data [0] | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : 0 : No error | +| -3 : Channel selection error | +| -101 : Data size error | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3XXX_InsnWriteTTLIO(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = insn->n; + BYTE b_Channel = (BYTE) CR_CHAN(insn->chanspec); + BYTE b_State = 0; + DWORD dw_Status = 0; + + /************************/ + /* Test the buffer size */ + /************************/ + + if (insn->n >= 1) { + b_State = (BYTE) data[0]; + + /***********************/ + /* Test if read port 0 */ + /***********************/ + + if (b_Channel < 8) { + /*****************************************************************************/ + /* Read port 0 (first digital output port) and set/reset the selcted channel */ + /*****************************************************************************/ + + dw_Status = inl(devpriv->iobase + 80); + dw_Status = + (dw_Status & (0xFF - + (1 << b_Channel))) | ((b_State & 1) << + b_Channel); + outl(dw_Status, devpriv->iobase + 80); + } else { + /***********************/ + /* Test if read port 2 */ + /***********************/ + + if ((b_Channel > 15) && (b_Channel < 24)) { + /*************************/ + /* Test if port 2 output */ + /*************************/ + + if ((devpriv->ul_TTLPortConfiguration[0] & 0xFF) + == 0xFF) { + /*****************************************************************************/ + /* Read port 2 (first digital output port) and set/reset the selcted channel */ + /*****************************************************************************/ + + dw_Status = inl(devpriv->iobase + 112); + dw_Status = + (dw_Status & (0xFF - + (1 << (b_Channel - + 16)))) | + ((b_State & 1) << (b_Channel - + 16)); + outl(dw_Status, devpriv->iobase + 112); + } else { + /***************************/ + /* Channel selection error */ + /***************************/ + + i_ReturnValue = -3; + printk("Channel %d selection error\n", + b_Channel); + } + } else { + /***************************/ + /* Channel selection error */ + /***************************/ + + i_ReturnValue = -3; + printk("Channel %d selection error\n", + b_Channel); + } + } + } else { + /*******************/ + /* Data size error */ + /*******************/ + + printk("Buffer size error\n"); + i_ReturnValue = -101; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| DIGITAL INPUT SUBDEVICE | ++----------------------------------------------------------------------------+ +*/ + +/* ++----------------------------------------------------------------------------+ +| Function name :int i_APCI3XXX_InsnReadDigitalInput | +| (comedi_device *dev, | +| comedi_subdevice *s, | +| comedi_insn *insn, | +| lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Reads the value of the specified Digital input channel | ++----------------------------------------------------------------------------+ +| Input Parameters : b_Channel = CR_CHAN(insn->chanspec) (0 to 3) | ++----------------------------------------------------------------------------+ +| Output Parameters : data[0] : Channel value | ++----------------------------------------------------------------------------+ +| Return Value : 0 : No error | +| -3 : Channel selection error | +| -101 : Data size error | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3XXX_InsnReadDigitalInput(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = insn->n; + BYTE b_Channel = (BYTE) CR_CHAN(insn->chanspec); + DWORD dw_Temp = 0; + + /***************************/ + /* Test the channel number */ + /***************************/ + + if (b_Channel <= devpriv->ps_BoardInfo->i_NbrDiChannel) { + /************************/ + /* Test the buffer size */ + /************************/ + + if (insn->n >= 1) { + dw_Temp = inl(devpriv->iobase + 32); + *data = (dw_Temp >> b_Channel) & 1; + } else { + /*******************/ + /* Data size error */ + /*******************/ + + printk("Buffer size error\n"); + i_ReturnValue = -101; + } + } else { + /***************************/ + /* Channel selection error */ + /***************************/ + + printk("Channel selection error\n"); + i_ReturnValue = -3; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function name :int i_APCI3XXX_InsnBitsDigitalInput | +| (comedi_device *dev, | +| comedi_subdevice *s, | +| comedi_insn *insn, | +| lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Reads the value of the Digital input Port i.e.4channels| ++----------------------------------------------------------------------------+ +| Input Parameters : - | ++----------------------------------------------------------------------------+ +| Output Parameters : data[0] : Port value | ++----------------------------------------------------------------------------+ +| Return Value :>0: No error | +| .... | +| -101 : Data size error | ++----------------------------------------------------------------------------+ +*/ +int i_APCI3XXX_InsnBitsDigitalInput(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = insn->n; + DWORD dw_Temp = 0; + + /************************/ + /* Test the buffer size */ + /************************/ + + if (insn->n >= 1) { + dw_Temp = inl(devpriv->iobase + 32); + *data = dw_Temp & 0xf; + } else { + /*******************/ + /* Data size error */ + /*******************/ + + printk("Buffer size error\n"); + i_ReturnValue = -101; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| DIGITAL OUTPUT SUBDEVICE | ++----------------------------------------------------------------------------+ + +*/ + +/* ++----------------------------------------------------------------------------+ +| Function name :int i_APCI3XXX_InsnBitsDigitalOutput | +| (comedi_device *dev, | +| comedi_subdevice *s, | +| comedi_insn *insn, | +| lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Write the selected output mask and read the status from| +| all digital output channles | ++----------------------------------------------------------------------------+ +| Input Parameters : dw_ChannelMask = data [0]; | +| dw_BitMask = data [1]; | ++----------------------------------------------------------------------------+ +| Output Parameters : data[1] : All digital output channles states | ++----------------------------------------------------------------------------+ +| Return Value : >0 : No error | +| -4 : Channel mask error | +| -101 : Data size error | ++----------------------------------------------------------------------------+ +*/ +int i_APCI3XXX_InsnBitsDigitalOutput(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = insn->n; + BYTE b_ChannelCpt = 0; + DWORD dw_ChannelMask = 0; + DWORD dw_BitMask = 0; + DWORD dw_Status = 0; + + /************************/ + /* Test the buffer size */ + /************************/ + + if (insn->n >= 2) { + /*******************************/ + /* Get the channe and bit mask */ + /*******************************/ + + dw_ChannelMask = data[0]; + dw_BitMask = data[1]; + + /*************************/ + /* Test the channel mask */ + /*************************/ + + if ((dw_ChannelMask & 0XFFFFFFF0) == 0) { + /*********************************/ + /* Test if set/reset any channel */ + /*********************************/ + + if (dw_ChannelMask & 0xF) { + /********************************/ + /* Read the digital output port */ + /********************************/ + + dw_Status = inl(devpriv->iobase + 48); + + for (b_ChannelCpt = 0; b_ChannelCpt < 4; + b_ChannelCpt++) { + if ((dw_ChannelMask >> b_ChannelCpt) & + 1) { + dw_Status = + (dw_Status & (0xF - + (1 << b_ChannelCpt))) | (dw_BitMask & (1 << b_ChannelCpt)); + } + } + + outl(dw_Status, devpriv->iobase + 48); + } + + /********************************/ + /* Read the digital output port */ + /********************************/ + + data[1] = inl(devpriv->iobase + 48); + } else { + /************************/ + /* Config command error */ + /************************/ + + printk("Channel mask error\n"); + i_ReturnValue = -4; + } + } else { + /*******************/ + /* Data size error */ + /*******************/ + + printk("Buffer size error\n"); + i_ReturnValue = -101; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function name :int i_APCI3XXX_InsnWriteDigitalOutput | +| (comedi_device *dev, | +| comedi_subdevice *s, | +| comedi_insn *insn, | +| lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Set the state from digital output channel | ++----------------------------------------------------------------------------+ +| Input Parameters : b_Channel = CR_CHAN(insn->chanspec) | +| b_State = data [0] | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : >0 : No error | +| -3 : Channel selection error | +| -101 : Data size error | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3XXX_InsnWriteDigitalOutput(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = insn->n; + BYTE b_Channel = CR_CHAN(insn->chanspec); + BYTE b_State = 0; + DWORD dw_Status = 0; + + /************************/ + /* Test the buffer size */ + /************************/ + + if (insn->n >= 1) { + /***************************/ + /* Test the channel number */ + /***************************/ + + if (b_Channel < devpriv->ps_BoardInfo->i_NbrDoChannel) { + /*******************/ + /* Get the command */ + /*******************/ + + b_State = (BYTE) data[0]; + + /********************************/ + /* Read the digital output port */ + /********************************/ + + dw_Status = inl(devpriv->iobase + 48); + + dw_Status = + (dw_Status & (0xF - + (1 << b_Channel))) | ((b_State & 1) << + b_Channel); + outl(dw_Status, devpriv->iobase + 48); + } else { + /***************************/ + /* Channel selection error */ + /***************************/ + + printk("Channel selection error\n"); + i_ReturnValue = -3; + } + } else { + /*******************/ + /* Data size error */ + /*******************/ + + printk("Buffer size error\n"); + i_ReturnValue = -101; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function name :int i_APCI3XXX_InsnReadDigitalOutput | +| (comedi_device *dev, | +| comedi_subdevice *s, | +| comedi_insn *insn, | +| lsampl_t *data) | ++----------------------------------------------------------------------------+ +| Task : Read the state from digital output channel | ++----------------------------------------------------------------------------+ +| Input Parameters : b_Channel = CR_CHAN(insn->chanspec) | ++----------------------------------------------------------------------------+ +| Output Parameters : b_State = data [0] | ++----------------------------------------------------------------------------+ +| Return Value : >0 : No error | +| -3 : Channel selection error | +| -101 : Data size error | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3XXX_InsnReadDigitalOutput(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + INT i_ReturnValue = insn->n; + BYTE b_Channel = CR_CHAN(insn->chanspec); + DWORD dw_Status = 0; + + /************************/ + /* Test the buffer size */ + /************************/ + + if (insn->n >= 1) { + /***************************/ + /* Test the channel number */ + /***************************/ + + if (b_Channel < devpriv->ps_BoardInfo->i_NbrDoChannel) { + /********************************/ + /* Read the digital output port */ + /********************************/ + + dw_Status = inl(devpriv->iobase + 48); + + dw_Status = (dw_Status >> b_Channel) & 1; + *data = dw_Status; + } else { + /***************************/ + /* Channel selection error */ + /***************************/ + + printk("Channel selection error\n"); + i_ReturnValue = -3; + } + } else { + /*******************/ + /* Data size error */ + /*******************/ + + printk("Buffer size error\n"); + i_ReturnValue = -101; + } + + return (i_ReturnValue); +} + +/* ++----------------------------------------------------------------------------+ +| Function Name : int i_APCI3XXX_Reset(comedi_device *dev) | +----------------------------------------------------------------------------+ +| Task :resets all the registers | ++----------------------------------------------------------------------------+ +| Input Parameters : comedi_device *dev | ++----------------------------------------------------------------------------+ +| Output Parameters : - | ++----------------------------------------------------------------------------+ +| Return Value : - | ++----------------------------------------------------------------------------+ +*/ + +int i_APCI3XXX_Reset(comedi_device * dev) +{ + unsigned char b_Cpt = 0; + + /*************************/ + /* Disable the interrupt */ + /*************************/ + + disable_irq(dev->irq); + + /****************************/ + /* Reset the interrupt flag */ + /****************************/ + + devpriv->b_EocEosInterrupt = 0; + + /***************************/ + /* Clear the start command */ + /***************************/ + + writel(0, (void *)(devpriv->dw_AiBase + 8)); + + /*****************************/ + /* Reset the interrupt flags */ + /*****************************/ + + writel(readl((void *)(devpriv->dw_AiBase + 16)), + (void *)(devpriv->dw_AiBase + 16)); + + /*****************/ + /* clear the EOS */ + /*****************/ + + readl((void *)(devpriv->dw_AiBase + 20)); + + /******************/ + /* Clear the FIFO */ + /******************/ + + for (b_Cpt = 0; b_Cpt < 16; b_Cpt++) { + readl((void *)(devpriv->dw_AiBase + 28)); + } + + /************************/ + /* Enable the interrupt */ + /************************/ + + enable_irq(dev->irq); + + return 0; +} --- /dev/null +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.h @@ -0,0 +1,69 @@ +/** +@verbatim + +Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. + + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com + +This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +You shoud also find the complete GPL in the COPYING file accompanying this source code. + +@endverbatim +*/ + +#ifndef COMEDI_SUBD_TTLIO +#define COMEDI_SUBD_TTLIO 11 /* Digital Input Output But TTL */ +#endif + +#ifndef ADDIDATA_ENABLE +#define ADDIDATA_ENABLE 1 +#define ADDIDATA_DISABLE 0 +#endif + +#define APCI3XXX_SINGLE 0 +#define APCI3XXX_DIFF 1 +#define APCI3XXX_CONFIGURATION 0 + +#define APCI3XXX_TTL_INIT_DIRECTION_PORT2 0 + +#ifdef __KERNEL__ + +static const comedi_lrange range_apci3XXX_ai = { 8, {BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2), + BIP_RANGE(1), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2), + UNI_RANGE(1)} +}; + +static const comedi_lrange range_apci3XXX_ttl = { 12, {BIP_RANGE(1), + BIP_RANGE(1), + BIP_RANGE(1), + BIP_RANGE(1), + BIP_RANGE(1), + BIP_RANGE(1), + BIP_RANGE(1), + BIP_RANGE(1), + BIP_RANGE(1), + BIP_RANGE(1), + BIP_RANGE(1), + BIP_RANGE(1)} +}; + +static const comedi_lrange range_apci3XXX_ao = { 2, {BIP_RANGE(10), + UNI_RANGE(10)} +}; +#endif