From bzolnier@gmail.com Thu Jul 2 12:22:29 2009 From: Bartlomiej Zolnierkiewicz Date: Fri, 12 Jun 2009 18:28:35 +0200 Subject: Staging: rtl8187se: remove duplicate dot11d.h and ieee80211.h includes To: Greg KH Cc: linux-kernel@vger.kernel.org Message-ID: <200906121828.35709.bzolnier@gmail.com> Content-Disposition: inline Always use includes from ieee80211/ subdirectory. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8187se/dot11d.h | 101 - drivers/staging/rtl8187se/ieee80211.h | 1755 ---------------------------- drivers/staging/rtl8187se/r8180.h | 2 drivers/staging/rtl8187se/r8180_core.c | 2 drivers/staging/rtl8187se/r8180_rtl8225z2.c | 2 drivers/staging/rtl8187se/r8180_wx.c | 2 drivers/staging/rtl8187se/r8180_wx.h | 2 drivers/staging/rtl8187se/r8185b_init.c | 2 8 files changed, 6 insertions(+), 1862 deletions(-) --- a/drivers/staging/rtl8187se/dot11d.h +++ /dev/null @@ -1,101 +0,0 @@ -#ifndef __INC_DOT11D_H -#define __INC_DOT11D_H - -#include "ieee80211.h" - -//#define ENABLE_DOT11D - -//#define DOT11D_MAX_CHNL_NUM 83 - -typedef struct _CHNL_TXPOWER_TRIPLE { - u8 FirstChnl; - u8 NumChnls; - u8 MaxTxPowerInDbm; -}CHNL_TXPOWER_TRIPLE, *PCHNL_TXPOWER_TRIPLE; - -typedef enum _DOT11D_STATE { - DOT11D_STATE_NONE = 0, - DOT11D_STATE_LEARNED, - DOT11D_STATE_DONE, -}DOT11D_STATE; - -typedef struct _RT_DOT11D_INFO { - //DECLARE_RT_OBJECT(RT_DOT11D_INFO); - - bool bEnabled; // dot11MultiDomainCapabilityEnabled - - u16 CountryIeLen; // > 0 if CountryIeBuf[] contains valid country information element. - u8 CountryIeBuf[MAX_IE_LEN]; - u8 CountryIeSrcAddr[6]; // Source AP of the country IE. - u8 CountryIeWatchdog; - - u8 channel_map[MAX_CHANNEL_NUMBER+1]; //!!!Value 0: Invalid, 1: Valid (active scan), 2: Valid (passive scan) - //u8 ChnlListLen; // #Bytes valid in ChnlList[]. - //u8 ChnlList[DOT11D_MAX_CHNL_NUM]; - u8 MaxTxPwrDbmList[MAX_CHANNEL_NUMBER+1]; - - DOT11D_STATE State; -}RT_DOT11D_INFO, *PRT_DOT11D_INFO; -#define eqMacAddr(a,b) ( ((a)[0]==(b)[0] && (a)[1]==(b)[1] && (a)[2]==(b)[2] && (a)[3]==(b)[3] && (a)[4]==(b)[4] && (a)[5]==(b)[5]) ? 1:0 ) -#define cpMacAddr(des,src) ((des)[0]=(src)[0],(des)[1]=(src)[1],(des)[2]=(src)[2],(des)[3]=(src)[3],(des)[4]=(src)[4],(des)[5]=(src)[5]) -#define GET_DOT11D_INFO(__pIeeeDev) ((PRT_DOT11D_INFO)((__pIeeeDev)->pDot11dInfo)) - -#define IS_DOT11D_ENABLE(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->bEnabled -#define IS_COUNTRY_IE_VALID(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen > 0) - -#define IS_EQUAL_CIE_SRC(__pIeeeDev, __pTa) eqMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa) -#define UPDATE_CIE_SRC(__pIeeeDev, __pTa) cpMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa) - -#define IS_COUNTRY_IE_CHANGED(__pIeeeDev, __Ie) \ - (((__Ie).Length == 0 || (__Ie).Length != GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen) ? \ - FALSE : \ - (!memcmp(GET_DOT11D_INFO(__pIeeeDev)->CountryIeBuf, (__Ie).Octet, (__Ie).Length))) - -#define CIE_WATCHDOG_TH 1 -#define GET_CIE_WATCHDOG(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->CountryIeWatchdog -#define RESET_CIE_WATCHDOG(__pIeeeDev) GET_CIE_WATCHDOG(__pIeeeDev) = 0 -#define UPDATE_CIE_WATCHDOG(__pIeeeDev) ++GET_CIE_WATCHDOG(__pIeeeDev) - -#define IS_DOT11D_STATE_DONE(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->State == DOT11D_STATE_DONE) - - -void -Dot11d_Init( - struct ieee80211_device *dev - ); - -void -Dot11d_Reset( - struct ieee80211_device *dev - ); - -void -Dot11d_UpdateCountryIe( - struct ieee80211_device *dev, - u8 * pTaddr, - u16 CoutryIeLen, - u8 * pCoutryIe - ); - -u8 -DOT11D_GetMaxTxPwrInDbm( - struct ieee80211_device *dev, - u8 Channel - ); - -void -DOT11D_ScanComplete( - struct ieee80211_device * dev - ); - -int IsLegalChannel( - struct ieee80211_device * dev, - u8 channel -); - -int ToLegalChannel( - struct ieee80211_device * dev, - u8 channel -); - -#endif // #ifndef __INC_DOT11D_H --- a/drivers/staging/rtl8187se/ieee80211.h +++ /dev/null @@ -1,1755 +0,0 @@ -/* - * Merged with mainline ieee80211.h in Aug 2004. Original ieee802_11 - * remains copyright by the original authors - * - * Portions of the merged code are based on Host AP (software wireless - * LAN access point) driver for Intersil Prism2/2.5/3. - * - * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen - * - * Copyright (c) 2002-2003, Jouni Malinen - * - * Adaption to a generic IEEE 802.11 stack by James Ketrenos - * - * Copyright (c) 2004, Intel Corporation - * - * Modified for Realtek's wi-fi cards by Andrea Merello - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. See README and COPYING for - * more details. - */ -#ifndef IEEE80211_H -#define IEEE80211_H -#include /* ETH_ALEN */ -#include /* ARRAY_SIZE */ -#include -#include -#include -#include - -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,13)) -#include -#endif - -/* -#ifndef bool -#define bool int -#endif - -#ifndef true -#define true 1 -#endif - -#ifndef false -#define false 0 -#endif -*/ -#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)) -#ifndef bool -typedef enum{false = 0, true} bool; -#endif -#endif -//#ifdef JOHN_HWSEC -#define KEY_TYPE_NA 0x0 -#define KEY_TYPE_WEP40 0x1 -#define KEY_TYPE_TKIP 0x2 -#define KEY_TYPE_CCMP 0x4 -#define KEY_TYPE_WEP104 0x5 -//#endif - - -#define aSifsTime 10 - -#define MGMT_QUEUE_NUM 5 - - -#define IEEE_CMD_SET_WPA_PARAM 1 -#define IEEE_CMD_SET_WPA_IE 2 -#define IEEE_CMD_SET_ENCRYPTION 3 -#define IEEE_CMD_MLME 4 - -#define IEEE_PARAM_WPA_ENABLED 1 -#define IEEE_PARAM_TKIP_COUNTERMEASURES 2 -#define IEEE_PARAM_DROP_UNENCRYPTED 3 -#define IEEE_PARAM_PRIVACY_INVOKED 4 -#define IEEE_PARAM_AUTH_ALGS 5 -#define IEEE_PARAM_IEEE_802_1X 6 -//It should consistent with the driver_XXX.c -// David, 2006.9.26 -#define IEEE_PARAM_WPAX_SELECT 7 -//Added for notify the encryption type selection -// David, 2006.9.26 -#define IEEE_PROTO_WPA 1 -#define IEEE_PROTO_RSN 2 -//Added for notify the encryption type selection -// David, 2006.9.26 -#define IEEE_WPAX_USEGROUP 0 -#define IEEE_WPAX_WEP40 1 -#define IEEE_WPAX_TKIP 2 -#define IEEE_WPAX_WRAP 3 -#define IEEE_WPAX_CCMP 4 -#define IEEE_WPAX_WEP104 5 - -#define IEEE_KEY_MGMT_IEEE8021X 1 -#define IEEE_KEY_MGMT_PSK 2 - - - -#define IEEE_MLME_STA_DEAUTH 1 -#define IEEE_MLME_STA_DISASSOC 2 - - -#define IEEE_CRYPT_ERR_UNKNOWN_ALG 2 -#define IEEE_CRYPT_ERR_UNKNOWN_ADDR 3 -#define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED 4 -#define IEEE_CRYPT_ERR_KEY_SET_FAILED 5 -#define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED 6 -#define IEEE_CRYPT_ERR_CARD_CONF_FAILED 7 - - -#define IEEE_CRYPT_ALG_NAME_LEN 16 - -#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,10)) -#define ieee80211_wx_get_scan ieee80211_wx_get_scan_rtl -#define ieee80211_wx_set_encode ieee80211_wx_set_encode_rtl -#define ieee80211_wx_get_encode ieee80211_wx_get_encode_rtl -//////////////////////////////// -// added for kernel conflict under FC5 -#define ieee80211_wx_get_name ieee80211_wx_get_name_rtl -#define free_ieee80211 free_ieee80211_rtl -#define alloc_ieee80211 alloc_ieee80211_rtl -/////////////////////////////// -#endif -//error in ubuntu2.6.22,so add these -#define ieee80211_wake_queue ieee80211_wake_queue_rtl -#define ieee80211_stop_queue ieee80211_stop_queue_rtl - -#define ieee80211_rx ieee80211_rx_rtl - -#define ieee80211_register_crypto_ops ieee80211_register_crypto_ops_rtl -#define ieee80211_unregister_crypto_ops ieee80211_unregister_crypto_ops_rtl -#define ieee80211_get_crypto_ops ieee80211_get_crypto_ops_rtl -#define ieee80211_crypt_deinit_entries ieee80211_crypt_deinit_entries_rtl -#define ieee80211_crypt_deinit_handler ieee80211_crypt_deinit_handler_rtl -#define ieee80211_crypt_delayed_deinit ieee80211_crypt_delayed_deinit_rtl - -#define ieee80211_txb_free ieee80211_txb_free_rtl -#define ieee80211_wx_get_essid ieee80211_wx_get_essid_rtl -#define ieee80211_wx_set_essid ieee80211_wx_set_essid_rtl -#define ieee80211_wx_set_rate ieee80211_wx_set_rate_rtl -#define ieee80211_wx_get_rate ieee80211_wx_get_rate_rtl -#define ieee80211_wx_set_wap ieee80211_wx_set_wap_rtl -#define ieee80211_wx_get_wap ieee80211_wx_get_wap_rtl -#define ieee80211_wx_set_mode ieee80211_wx_set_mode_rtl -#define ieee80211_wx_get_mode ieee80211_wx_get_mode_rtl -#define ieee80211_wx_set_scan ieee80211_wx_set_scan_rtl -#define ieee80211_wx_get_freq ieee80211_wx_get_freq_rtl -#define ieee80211_wx_set_freq ieee80211_wx_set_freq_rtl -#define ieee80211_wx_set_rawtx ieee80211_wx_set_rawtx_rtl -#define ieee80211_wx_set_power ieee80211_wx_set_power_rtl -#define ieee80211_wx_get_power ieee80211_wx_get_power_rtl -#define ieee80211_wlan_frequencies ieee80211_wlan_frequencies_rtl -#define ieee80211_softmac_stop_protocol ieee80211_softmac_stop_protocol_rtl -#define ieee80211_softmac_start_protocol ieee80211_softmac_start_protocol_rtl -#define ieee80211_start_protocol ieee80211_start_protocol_rtl -#define ieee80211_stop_protocol ieee80211_stop_protocol_rtl -#define ieee80211_rx_mgt ieee80211_rx_mgt_rtl - -#define ieee80211_wx_set_auth ieee80211_wx_set_auth_rtl -//by amy for ps -#define notify_wx_assoc_event notify_wx_assoc_event_rtl -#define ieee80211_stop_send_beacons ieee80211_stop_send_beacons_rtl -#define ieee80211_disassociate ieee80211_disassociate_rtl -#define ieee80211_start_scan ieee80211_start_scan_rtl -//by amy for ps -typedef struct ieee_param { - u32 cmd; - u8 sta_addr[ETH_ALEN]; - union { - struct { - u8 name; - u32 value; - } wpa_param; - struct { - u32 len; - u8 reserved[32]; - u8 data[0]; - } wpa_ie; - struct{ - int command; - int reason_code; - } mlme; - struct { - u8 alg[IEEE_CRYPT_ALG_NAME_LEN]; - u8 set_tx; - u32 err; - u8 idx; - u8 seq[8]; /* sequence counter (set: RX, get: TX) */ - u16 key_len; - u8 key[0]; - } crypt; - - } u; -}ieee_param; - - -#if WIRELESS_EXT < 17 -#define IW_QUAL_QUAL_INVALID 0x10 -#define IW_QUAL_LEVEL_INVALID 0x20 -#define IW_QUAL_NOISE_INVALID 0x40 -#define IW_QUAL_QUAL_UPDATED 0x1 -#define IW_QUAL_LEVEL_UPDATED 0x2 -#define IW_QUAL_NOISE_UPDATED 0x4 -#endif - -// linux under 2.6.9 release may not support it, so modify it for common use -#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,9)) -#define MSECS(t) (1000 * ((t) / HZ) + 1000 * ((t) % HZ) / HZ) -static inline unsigned long msleep_interruptible_rtl(unsigned int msecs) -{ - unsigned long timeout = MSECS(msecs) + 1; - - while (timeout) { - set_current_state(TASK_UNINTERRUPTIBLE); - timeout = schedule_timeout(timeout); - } - return timeout; -} -#else -#define MSECS(t) msecs_to_jiffies(t) -#define msleep_interruptible_rtl msleep_interruptible -#endif - -#define IEEE80211_DATA_LEN 2304 -/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section - 6.2.1.1.2. - - The figure in section 7.1.2 suggests a body size of up to 2312 - bytes is allowed, which is a bit confusing, I suspect this - represents the 2304 bytes of real data, plus a possible 8 bytes of - WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */ - - -#define IEEE80211_HLEN 30 -#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN) - -/* this is stolen and modified from the madwifi driver*/ -#define IEEE80211_FC0_TYPE_MASK 0x0c -#define IEEE80211_FC0_TYPE_DATA 0x08 -#define IEEE80211_FC0_SUBTYPE_MASK 0xB0 -#define IEEE80211_FC0_SUBTYPE_QOS 0x80 - -#define IEEE80211_QOS_HAS_SEQ(fc) \ - (((fc) & (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == \ - (IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS)) - -/* this is stolen from ipw2200 driver */ -#define IEEE_IBSS_MAC_HASH_SIZE 31 -struct ieee_ibss_seq { - u8 mac[ETH_ALEN]; - u16 seq_num[17]; - u16 frag_num[17]; - unsigned long packet_time[17]; - struct list_head list; -}; - -struct ieee80211_hdr { - u16 frame_ctl; - u16 duration_id; - u8 addr1[ETH_ALEN]; - u8 addr2[ETH_ALEN]; - u8 addr3[ETH_ALEN]; - u16 seq_ctl; - u8 addr4[ETH_ALEN]; -} __attribute__ ((packed)); - -struct ieee80211_hdr_QOS { - u16 frame_ctl; - u16 duration_id; - u8 addr1[ETH_ALEN]; - u8 addr2[ETH_ALEN]; - u8 addr3[ETH_ALEN]; - u16 seq_ctl; - u8 addr4[ETH_ALEN]; - u16 QOS_ctl; -} __attribute__ ((packed)); - -struct ieee80211_hdr_3addr { - u16 frame_ctl; - u16 duration_id; - u8 addr1[ETH_ALEN]; - u8 addr2[ETH_ALEN]; - u8 addr3[ETH_ALEN]; - u16 seq_ctl; -} __attribute__ ((packed)); - -struct ieee80211_hdr_3addr_QOS { - u16 frame_ctl; - u16 duration_id; - u8 addr1[ETH_ALEN]; - u8 addr2[ETH_ALEN]; - u8 addr3[ETH_ALEN]; - u16 seq_ctl; - u16 QOS_ctl; -} __attribute__ ((packed)); - -enum eap_type { - EAP_PACKET = 0, - EAPOL_START, - EAPOL_LOGOFF, - EAPOL_KEY, - EAPOL_ENCAP_ASF_ALERT -}; - -static const char *eap_types[] = { - [EAP_PACKET] = "EAP-Packet", - [EAPOL_START] = "EAPOL-Start", - [EAPOL_LOGOFF] = "EAPOL-Logoff", - [EAPOL_KEY] = "EAPOL-Key", - [EAPOL_ENCAP_ASF_ALERT] = "EAPOL-Encap-ASF-Alert" -}; - -static inline const char *eap_get_type(int type) -{ - return (type >= ARRAY_SIZE(eap_types)) ? "Unknown" : eap_types[type]; -} - -struct eapol { - u8 snap[6]; - u16 ethertype; - u8 version; - u8 type; - u16 length; -} __attribute__ ((packed)); - -#define IEEE80211_3ADDR_LEN 24 -#define IEEE80211_4ADDR_LEN 30 -#define IEEE80211_FCS_LEN 4 - -#define MIN_FRAG_THRESHOLD 256U -#define MAX_FRAG_THRESHOLD 2346U - -/* Frame control field constants */ -#define IEEE80211_FCTL_VERS 0x0002 -#define IEEE80211_FCTL_FTYPE 0x000c -#define IEEE80211_FCTL_STYPE 0x00f0 -#define IEEE80211_FCTL_TODS 0x0100 -#define IEEE80211_FCTL_FROMDS 0x0200 -#define IEEE80211_FCTL_DSTODS 0x0300 //added by david -#define IEEE80211_FCTL_MOREFRAGS 0x0400 -#define IEEE80211_FCTL_RETRY 0x0800 -#define IEEE80211_FCTL_PM 0x1000 -#define IEEE80211_FCTL_MOREDATA 0x2000 -#define IEEE80211_FCTL_WEP 0x4000 -#define IEEE80211_FCTL_ORDER 0x8000 - -#define IEEE80211_FTYPE_MGMT 0x0000 -#define IEEE80211_FTYPE_CTL 0x0004 -#define IEEE80211_FTYPE_DATA 0x0008 - -/* management */ -#define IEEE80211_STYPE_ASSOC_REQ 0x0000 -#define IEEE80211_STYPE_ASSOC_RESP 0x0010 -#define IEEE80211_STYPE_REASSOC_REQ 0x0020 -#define IEEE80211_STYPE_REASSOC_RESP 0x0030 -#define IEEE80211_STYPE_PROBE_REQ 0x0040 -#define IEEE80211_STYPE_PROBE_RESP 0x0050 -#define IEEE80211_STYPE_BEACON 0x0080 -#define IEEE80211_STYPE_ATIM 0x0090 -#define IEEE80211_STYPE_DISASSOC 0x00A0 -#define IEEE80211_STYPE_AUTH 0x00B0 -#define IEEE80211_STYPE_DEAUTH 0x00C0 -#define IEEE80211_STYPE_MANAGE_ACT 0x00D0 - -/* control */ -#define IEEE80211_STYPE_PSPOLL 0x00A0 -#define IEEE80211_STYPE_RTS 0x00B0 -#define IEEE80211_STYPE_CTS 0x00C0 -#define IEEE80211_STYPE_ACK 0x00D0 -#define IEEE80211_STYPE_CFEND 0x00E0 -#define IEEE80211_STYPE_CFENDACK 0x00F0 - -/* data */ -#define IEEE80211_STYPE_DATA 0x0000 -#define IEEE80211_STYPE_DATA_CFACK 0x0010 -#define IEEE80211_STYPE_DATA_CFPOLL 0x0020 -#define IEEE80211_STYPE_DATA_CFACKPOLL 0x0030 -#define IEEE80211_STYPE_NULLFUNC 0x0040 -#define IEEE80211_STYPE_CFACK 0x0050 -#define IEEE80211_STYPE_CFPOLL 0x0060 -#define IEEE80211_STYPE_CFACKPOLL 0x0070 -#define IEEE80211_STYPE_QOS_DATA 0x0080 //added for WMM 2006/8/2 -#define IEEE80211_STYPE_QOS_NULL 0x00C0 - - -#define IEEE80211_SCTL_FRAG 0x000F -#define IEEE80211_SCTL_SEQ 0xFFF0 - - -/* debug macros */ - -#ifdef CONFIG_IEEE80211_DEBUG -extern u32 ieee80211_debug_level; -#define IEEE80211_DEBUG(level, fmt, args...) \ -do { if (ieee80211_debug_level & (level)) \ - printk(KERN_DEBUG "ieee80211: %c %s " fmt, \ - in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0) -#else -#define IEEE80211_DEBUG(level, fmt, args...) do {} while (0) -#endif /* CONFIG_IEEE80211_DEBUG */ - -/* - * To use the debug system; - * - * If you are defining a new debug classification, simply add it to the #define - * list here in the form of: - * - * #define IEEE80211_DL_xxxx VALUE - * - * shifting value to the left one bit from the previous entry. xxxx should be - * the name of the classification (for example, WEP) - * - * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your - * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want - * to send output to that classification. - * - * To add your debug level to the list of levels seen when you perform - * - * % cat /proc/net/ipw/debug_level - * - * you simply need to add your entry to the ipw_debug_levels array. - * - * If you do not see debug_level in /proc/net/ipw then you do not have - * CONFIG_IEEE80211_DEBUG defined in your kernel configuration - * - */ - -#define IEEE80211_DL_INFO (1<<0) -#define IEEE80211_DL_WX (1<<1) -#define IEEE80211_DL_SCAN (1<<2) -#define IEEE80211_DL_STATE (1<<3) -#define IEEE80211_DL_MGMT (1<<4) -#define IEEE80211_DL_FRAG (1<<5) -#define IEEE80211_DL_EAP (1<<6) -#define IEEE80211_DL_DROP (1<<7) - -#define IEEE80211_DL_TX (1<<8) -#define IEEE80211_DL_RX (1<<9) - -#define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a) -#define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a) -#define IEEE80211_DEBUG_INFO(f, a...) IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a) - -#define IEEE80211_DEBUG_WX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a) -#define IEEE80211_DEBUG_SCAN(f, a...) IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a) -//#define IEEE_DEBUG_SCAN IEEE80211_WARNING -#define IEEE80211_DEBUG_STATE(f, a...) IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a) -#define IEEE80211_DEBUG_MGMT(f, a...) IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a) -#define IEEE80211_DEBUG_FRAG(f, a...) IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a) -#define IEEE80211_DEBUG_EAP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a) -#define IEEE80211_DEBUG_DROP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a) -#define IEEE80211_DEBUG_TX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a) -#define IEEE80211_DEBUG_RX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a) -#include -#include -#include /* ARPHRD_ETHER */ - -#ifndef WIRELESS_SPY -#define WIRELESS_SPY // enable iwspy support -#endif -#include // new driver API - -#ifndef ETH_P_PAE -#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */ -#endif /* ETH_P_PAE */ - -#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */ - -#ifndef ETH_P_80211_RAW -#define ETH_P_80211_RAW (ETH_P_ECONET + 1) -#endif - -/* IEEE 802.11 defines */ - -#define P80211_OUI_LEN 3 - -struct ieee80211_snap_hdr { - - u8 dsap; /* always 0xAA */ - u8 ssap; /* always 0xAA */ - u8 ctrl; /* always 0x03 */ - u8 oui[P80211_OUI_LEN]; /* organizational universal id */ - -} __attribute__ ((packed)); - -#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr) - -#define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE) -#define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE) - -#define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG) -#define WLAN_GET_SEQ_SEQ(seq) ((seq) & IEEE80211_SCTL_SEQ) - -/* Authentication algorithms */ -#define WLAN_AUTH_OPEN 0 -#define WLAN_AUTH_SHARED_KEY 1 - -#define WLAN_AUTH_CHALLENGE_LEN 128 - -#define WLAN_CAPABILITY_BSS (1<<0) -#define WLAN_CAPABILITY_IBSS (1<<1) -#define WLAN_CAPABILITY_CF_POLLABLE (1<<2) -#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3) -#define WLAN_CAPABILITY_PRIVACY (1<<4) -#define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5) -#define WLAN_CAPABILITY_PBCC (1<<6) -#define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7) -#define WLAN_CAPABILITY_SHORT_SLOT (1<<10) - -/* Status codes */ -#define WLAN_STATUS_SUCCESS 0 -#define WLAN_STATUS_UNSPECIFIED_FAILURE 1 -#define WLAN_STATUS_CAPS_UNSUPPORTED 10 -#define WLAN_STATUS_REASSOC_NO_ASSOC 11 -#define WLAN_STATUS_ASSOC_DENIED_UNSPEC 12 -#define WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG 13 -#define WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION 14 -#define WLAN_STATUS_CHALLENGE_FAIL 15 -#define WLAN_STATUS_AUTH_TIMEOUT 16 -#define WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA 17 -#define WLAN_STATUS_ASSOC_DENIED_RATES 18 -/* 802.11b */ -#define WLAN_STATUS_ASSOC_DENIED_NOSHORT 19 -#define WLAN_STATUS_ASSOC_DENIED_NOPBCC 20 -#define WLAN_STATUS_ASSOC_DENIED_NOAGILITY 21 - -/* Reason codes */ -#define WLAN_REASON_UNSPECIFIED 1 -#define WLAN_REASON_PREV_AUTH_NOT_VALID 2 -#define WLAN_REASON_DEAUTH_LEAVING 3 -#define WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY 4 -#define WLAN_REASON_DISASSOC_AP_BUSY 5 -#define WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA 6 -#define WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA 7 -#define WLAN_REASON_DISASSOC_STA_HAS_LEFT 8 -#define WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH 9 - - -/* Information Element IDs */ -#define WLAN_EID_SSID 0 -#define WLAN_EID_SUPP_RATES 1 -#define WLAN_EID_FH_PARAMS 2 -#define WLAN_EID_DS_PARAMS 3 -#define WLAN_EID_CF_PARAMS 4 -#define WLAN_EID_TIM 5 -#define WLAN_EID_IBSS_PARAMS 6 -#define WLAN_EID_CHALLENGE 16 -#define WLAN_EID_RSN 48 -#define WLAN_EID_GENERIC 221 - -#define IEEE80211_MGMT_HDR_LEN 24 -#define IEEE80211_DATA_HDR3_LEN 24 -#define IEEE80211_DATA_HDR4_LEN 30 - - -#define IEEE80211_STATMASK_SIGNAL (1<<0) -#define IEEE80211_STATMASK_RSSI (1<<1) -#define IEEE80211_STATMASK_NOISE (1<<2) -#define IEEE80211_STATMASK_RATE (1<<3) -#define IEEE80211_STATMASK_WEMASK 0x7 - - -#define IEEE80211_CCK_MODULATION (1<<0) -#define IEEE80211_OFDM_MODULATION (1<<1) - -#define IEEE80211_24GHZ_BAND (1<<0) -#define IEEE80211_52GHZ_BAND (1<<1) - -#define IEEE80211_CCK_RATE_LEN 4 -#define IEEE80211_CCK_RATE_1MB 0x02 -#define IEEE80211_CCK_RATE_2MB 0x04 -#define IEEE80211_CCK_RATE_5MB 0x0B -#define IEEE80211_CCK_RATE_11MB 0x16 -#define IEEE80211_OFDM_RATE_LEN 8 -#define IEEE80211_OFDM_RATE_6MB 0x0C -#define IEEE80211_OFDM_RATE_9MB 0x12 -#define IEEE80211_OFDM_RATE_12MB 0x18 -#define IEEE80211_OFDM_RATE_18MB 0x24 -#define IEEE80211_OFDM_RATE_24MB 0x30 -#define IEEE80211_OFDM_RATE_36MB 0x48 -#define IEEE80211_OFDM_RATE_48MB 0x60 -#define IEEE80211_OFDM_RATE_54MB 0x6C -#define IEEE80211_BASIC_RATE_MASK 0x80 - -#define IEEE80211_CCK_RATE_1MB_MASK (1<<0) -#define IEEE80211_CCK_RATE_2MB_MASK (1<<1) -#define IEEE80211_CCK_RATE_5MB_MASK (1<<2) -#define IEEE80211_CCK_RATE_11MB_MASK (1<<3) -#define IEEE80211_OFDM_RATE_6MB_MASK (1<<4) -#define IEEE80211_OFDM_RATE_9MB_MASK (1<<5) -#define IEEE80211_OFDM_RATE_12MB_MASK (1<<6) -#define IEEE80211_OFDM_RATE_18MB_MASK (1<<7) -#define IEEE80211_OFDM_RATE_24MB_MASK (1<<8) -#define IEEE80211_OFDM_RATE_36MB_MASK (1<<9) -#define IEEE80211_OFDM_RATE_48MB_MASK (1<<10) -#define IEEE80211_OFDM_RATE_54MB_MASK (1<<11) - -#define IEEE80211_CCK_RATES_MASK 0x0000000F -#define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \ - IEEE80211_CCK_RATE_2MB_MASK) -#define IEEE80211_CCK_DEFAULT_RATES_MASK (IEEE80211_CCK_BASIC_RATES_MASK | \ - IEEE80211_CCK_RATE_5MB_MASK | \ - IEEE80211_CCK_RATE_11MB_MASK) - -#define IEEE80211_OFDM_RATES_MASK 0x00000FF0 -#define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \ - IEEE80211_OFDM_RATE_12MB_MASK | \ - IEEE80211_OFDM_RATE_24MB_MASK) -#define IEEE80211_OFDM_DEFAULT_RATES_MASK (IEEE80211_OFDM_BASIC_RATES_MASK | \ - IEEE80211_OFDM_RATE_9MB_MASK | \ - IEEE80211_OFDM_RATE_18MB_MASK | \ - IEEE80211_OFDM_RATE_36MB_MASK | \ - IEEE80211_OFDM_RATE_48MB_MASK | \ - IEEE80211_OFDM_RATE_54MB_MASK) -#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \ - IEEE80211_CCK_DEFAULT_RATES_MASK) - -#define IEEE80211_NUM_OFDM_RATES 8 -#define IEEE80211_NUM_CCK_RATES 4 -#define IEEE80211_OFDM_SHIFT_MASK_A 4 - - - - -/* NOTE: This data is for statistical purposes; not all hardware provides this - * information for frames received. Not setting these will not cause - * any adverse affects. */ -struct ieee80211_rx_stats { - u32 mac_time[2]; - u8 signalstrength; - s8 rssi; - u8 signal; - u8 noise; - u16 rate; /* in 100 kbps */ - u8 received_channel; - u8 control; - u8 mask; - u8 freq; - u16 len; - u8 nic_type; -}; - -/* IEEE 802.11 requires that STA supports concurrent reception of at least - * three fragmented frames. This define can be increased to support more - * concurrent frames, but it should be noted that each entry can consume about - * 2 kB of RAM and increasing cache size will slow down frame reassembly. */ -#define IEEE80211_FRAG_CACHE_LEN 4 - -struct ieee80211_frag_entry { - unsigned long first_frag_time; - unsigned int seq; - unsigned int last_frag; - struct sk_buff *skb; - u8 src_addr[ETH_ALEN]; - u8 dst_addr[ETH_ALEN]; -}; - -struct ieee80211_stats { - unsigned int tx_unicast_frames; - unsigned int tx_multicast_frames; - unsigned int tx_fragments; - unsigned int tx_unicast_octets; - unsigned int tx_multicast_octets; - unsigned int tx_deferred_transmissions; - unsigned int tx_single_retry_frames; - unsigned int tx_multiple_retry_frames; - unsigned int tx_retry_limit_exceeded; - unsigned int tx_discards; - unsigned int rx_unicast_frames; - unsigned int rx_multicast_frames; - unsigned int rx_fragments; - unsigned int rx_unicast_octets; - unsigned int rx_multicast_octets; - unsigned int rx_fcs_errors; - unsigned int rx_discards_no_buffer; - unsigned int tx_discards_wrong_sa; - unsigned int rx_discards_undecryptable; - unsigned int rx_message_in_msg_fragments; - unsigned int rx_message_in_bad_msg_fragments; -}; - -struct ieee80211_softmac_stats{ - unsigned int rx_ass_ok; - unsigned int rx_ass_err; - unsigned int rx_probe_rq; - unsigned int tx_probe_rs; - unsigned int tx_beacons; - unsigned int rx_auth_rq; - unsigned int rx_auth_rs_ok; - unsigned int rx_auth_rs_err; - unsigned int tx_auth_rq; - unsigned int no_auth_rs; - unsigned int no_ass_rs; - unsigned int tx_ass_rq; - unsigned int rx_ass_rq; - unsigned int tx_probe_rq; - unsigned int reassoc; - unsigned int swtxstop; - unsigned int swtxawake; -}; - -struct ieee80211_device; - -#include "ieee80211_crypt.h" - -#define SEC_KEY_1 (1<<0) -#define SEC_KEY_2 (1<<1) -#define SEC_KEY_3 (1<<2) -#define SEC_KEY_4 (1<<3) -#define SEC_ACTIVE_KEY (1<<4) -#define SEC_AUTH_MODE (1<<5) -#define SEC_UNICAST_GROUP (1<<6) -#define SEC_LEVEL (1<<7) -#define SEC_ENABLED (1<<8) - -#define SEC_LEVEL_0 0 /* None */ -#define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */ -#define SEC_LEVEL_2 2 /* Level 1 + TKIP */ -#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */ -#define SEC_LEVEL_3 4 /* Level 2 + CCMP */ - -#define WEP_KEYS 4 -#define WEP_KEY_LEN 13 - -#define WEP_KEY_LEN_MODIF 32 - -struct ieee80211_security { - u16 active_key:2, - enabled:1, - auth_mode:2, - auth_algo:4, - unicast_uses_group:1; - u8 key_sizes[WEP_KEYS]; - u8 keys[WEP_KEYS][WEP_KEY_LEN_MODIF]; - u8 level; - u16 flags; -} __attribute__ ((packed)); - - -/* - - 802.11 data frame from AP - - ,-------------------------------------------------------------------. -Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 | - |------|------|---------|---------|---------|------|---------|------| -Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs | - | | tion | (BSSID) | | | ence | data | | - `-------------------------------------------------------------------' - -Total: 28-2340 bytes - -*/ - -struct ieee80211_header_data { - u16 frame_ctl; - u16 duration_id; - u8 addr1[6]; - u8 addr2[6]; - u8 addr3[6]; - u16 seq_ctrl; -}; - -#define BEACON_PROBE_SSID_ID_POSITION 12 - -/* Management Frame Information Element Types */ -#define MFIE_TYPE_SSID 0 -#define MFIE_TYPE_RATES 1 -#define MFIE_TYPE_FH_SET 2 -#define MFIE_TYPE_DS_SET 3 -#define MFIE_TYPE_CF_SET 4 -#define MFIE_TYPE_TIM 5 -#define MFIE_TYPE_IBSS_SET 6 -#define MFIE_TYPE_COUNTRY 7 //+YJ,080625 -#define MFIE_TYPE_CHALLENGE 16 -#define MFIE_TYPE_ERP 42 -#define MFIE_TYPE_RSN 48 -#define MFIE_TYPE_RATES_EX 50 -#define MFIE_TYPE_GENERIC 221 - -#ifdef ENABLE_DOT11D -typedef enum -{ - COUNTRY_CODE_FCC = 0, - COUNTRY_CODE_IC = 1, - COUNTRY_CODE_ETSI = 2, - COUNTRY_CODE_SPAIN = 3, - COUNTRY_CODE_FRANCE = 4, - COUNTRY_CODE_MKK = 5, - COUNTRY_CODE_MKK1 = 6, - COUNTRY_CODE_ISRAEL = 7, - COUNTRY_CODE_TELEC = 8, - COUNTRY_CODE_GLOBAL_DOMAIN = 9, - COUNTRY_CODE_WORLD_WIDE_13_INDEX = 10 -}country_code_type_t; -#endif - -struct ieee80211_info_element_hdr { - u8 id; - u8 len; -} __attribute__ ((packed)); - -struct ieee80211_info_element { - u8 id; - u8 len; - u8 data[0]; -} __attribute__ ((packed)); - -/* - * These are the data types that can make up management packets - * - u16 auth_algorithm; - u16 auth_sequence; - u16 beacon_interval; - u16 capability; - u8 current_ap[ETH_ALEN]; - u16 listen_interval; - struct { - u16 association_id:14, reserved:2; - } __attribute__ ((packed)); - u32 time_stamp[2]; - u16 reason; - u16 status; -*/ - -#define IEEE80211_DEFAULT_TX_ESSID "Penguin" -#define IEEE80211_DEFAULT_BASIC_RATE 10 - -struct ieee80211_authentication { - struct ieee80211_header_data header; - u16 algorithm; - u16 transaction; - u16 status; - //struct ieee80211_info_element_hdr info_element; -} __attribute__ ((packed)); - - -struct ieee80211_probe_response { - struct ieee80211_header_data header; - u32 time_stamp[2]; - u16 beacon_interval; - u16 capability; - struct ieee80211_info_element info_element; -} __attribute__ ((packed)); - -struct ieee80211_probe_request { - struct ieee80211_header_data header; - /*struct ieee80211_info_element info_element;*/ -} __attribute__ ((packed)); - -struct ieee80211_assoc_request_frame { - struct ieee80211_hdr_3addr header; - u16 capability; - u16 listen_interval; - //u8 current_ap[ETH_ALEN]; - struct ieee80211_info_element_hdr info_element; -} __attribute__ ((packed)); - -struct ieee80211_assoc_response_frame { - struct ieee80211_hdr_3addr header; - u16 capability; - u16 status; - u16 aid; - struct ieee80211_info_element info_element; /* supported rates */ -} __attribute__ ((packed)); - -struct ieee80211_disassoc_frame{ - struct ieee80211_hdr_3addr header; - u16 reasoncode; -}__attribute__ ((packed)); - -struct ieee80211_txb { - u8 nr_frags; - u8 encrypted; - u16 reserved; - u16 frag_size; - u16 payload_size; - struct sk_buff *fragments[0]; -}; - -struct ieee80211_wmm_ac_param { - u8 ac_aci_acm_aifsn; - u8 ac_ecwmin_ecwmax; - u16 ac_txop_limit; -}; - -struct ieee80211_wmm_ts_info { - u8 ac_dir_tid; - u8 ac_up_psb; - u8 reserved; -} __attribute__ ((packed)); - -struct ieee80211_wmm_tspec_elem { - struct ieee80211_wmm_ts_info ts_info; - u16 norm_msdu_size; - u16 max_msdu_size; - u32 min_serv_inter; - u32 max_serv_inter; - u32 inact_inter; - u32 suspen_inter; - u32 serv_start_time; - u32 min_data_rate; - u32 mean_data_rate; - u32 peak_data_rate; - u32 max_burst_size; - u32 delay_bound; - u32 min_phy_rate; - u16 surp_band_allow; - u16 medium_time; -}__attribute__((packed)); - -enum {WMM_all_frame, WMM_two_frame, WMM_four_frame, WMM_six_frame}; -#define MAX_SP_Len (WMM_all_frame << 4) -#define IEEE80211_QOS_TID 0x0f -#define QOS_CTL_NOTCONTAIN_ACK (0x01 << 5) - -/* SWEEP TABLE ENTRIES NUMBER*/ -#define MAX_SWEEP_TAB_ENTRIES 42 -#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7 -/* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs - * only use 8, and then use extended rates for the remaining supported - * rates. Other APs, however, stick all of their supported rates on the - * main rates information element... */ -#define MAX_RATES_LENGTH ((u8)12) -#define MAX_RATES_EX_LENGTH ((u8)16) -#define MAX_NETWORK_COUNT 128 -//#define MAX_CHANNEL_NUMBER 161 -#define MAX_CHANNEL_NUMBER 165 //YJ,modified,080625 -#define MAX_IE_LEN 0xFF //+YJ,080625 - -typedef struct _CHANNEL_LIST{ - u8 Channel[MAX_CHANNEL_NUMBER + 1]; - u8 Len; -}CHANNEL_LIST, *PCHANNEL_LIST; - -#define IEEE80211_SOFTMAC_SCAN_TIME 100//400 -//(HZ / 2) -//by amy for ps -#define IEEE80211_WATCH_DOG_TIME 2000 -//by amy for ps -//by amy for antenna -#define ANTENNA_DIVERSITY_TIMER_PERIOD 1000 // 1000 m -//by amy for antenna -#define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2) - -#define CRC_LENGTH 4U - -#define MAX_WPA_IE_LEN 64 - -#define NETWORK_EMPTY_ESSID (1<<0) -#define NETWORK_HAS_OFDM (1<<1) -#define NETWORK_HAS_CCK (1<<2) - -#define IEEE80211_DTIM_MBCAST 4 -#define IEEE80211_DTIM_UCAST 2 -#define IEEE80211_DTIM_VALID 1 -#define IEEE80211_DTIM_INVALID 0 - -#define IEEE80211_PS_DISABLED 0 -#define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST -#define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST -#define IEEE80211_PS_ENABLE IEEE80211_DTIM_VALID -//added by David for QoS 2006/6/30 -//#define WMM_Hang_8187 -#ifdef WMM_Hang_8187 -#undef WMM_Hang_8187 -#endif - -#define WME_AC_BE 0x00 -#define WME_AC_BK 0x01 -#define WME_AC_VI 0x02 -#define WME_AC_VO 0x03 -#define WME_ACI_MASK 0x03 -#define WME_AIFSN_MASK 0x03 -#define WME_AC_PRAM_LEN 16 - -//UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP -//#define UP2AC(up) ((up<3) ? ((up==0)?1:0) : (up>>1)) -#define UP2AC(up) ( \ - ((up) < 1) ? WME_AC_BE : \ - ((up) < 3) ? WME_AC_BK : \ - ((up) < 4) ? WME_AC_BE : \ - ((up) < 6) ? WME_AC_VI : \ - WME_AC_VO) -//AC Mapping to UP, using in Tx part for selecting the corresponding TX queue -#define AC2UP(_ac) ( \ - ((_ac) == WME_AC_VO) ? 6 : \ - ((_ac) == WME_AC_VI) ? 5 : \ - ((_ac) == WME_AC_BK) ? 1 : \ - 0) - -#define ETHER_ADDR_LEN 6 /* length of an Ethernet address */ -struct ether_header { - u8 ether_dhost[ETHER_ADDR_LEN]; - u8 ether_shost[ETHER_ADDR_LEN]; - u16 ether_type; -} __attribute__((packed)); - -#ifndef ETHERTYPE_PAE -#define ETHERTYPE_PAE 0x888e /* EAPOL PAE/802.1x */ -#endif -#ifndef ETHERTYPE_IP -#define ETHERTYPE_IP 0x0800 /* IP protocol */ -#endif - -struct ieee80211_network { - /* These entries are used to identify a unique network */ - u8 bssid[ETH_ALEN]; - u8 channel; - /* Ensure null-terminated for any debug msgs */ - u8 ssid[IW_ESSID_MAX_SIZE + 1]; - u8 ssid_len; - - /* These are network statistics */ - struct ieee80211_rx_stats stats; - u16 capability; - u8 rates[MAX_RATES_LENGTH]; - u8 rates_len; - u8 rates_ex[MAX_RATES_EX_LENGTH]; - u8 rates_ex_len; - unsigned long last_scanned; - u8 mode; - u8 flags; - u32 last_associate; - u32 time_stamp[2]; - u16 beacon_interval; - u16 listen_interval; - u16 atim_window; - u8 wpa_ie[MAX_WPA_IE_LEN]; - size_t wpa_ie_len; - u8 rsn_ie[MAX_WPA_IE_LEN]; - size_t rsn_ie_len; - u8 dtim_period; - u8 dtim_data; - u32 last_dtim_sta_time[2]; - struct list_head list; - //appeded for QoS - u8 wmm_info; - struct ieee80211_wmm_ac_param wmm_param[4]; - u8 QoS_Enable; - u8 SignalStrength; -//by amy 080312 - u8 HighestOperaRate; -//by amy 080312 -#ifdef THOMAS_TURBO - u8 Turbo_Enable;//enable turbo mode, added by thomas -#endif -#ifdef ENABLE_DOT11D - u16 CountryIeLen; - u8 CountryIeBuf[MAX_IE_LEN]; -#endif -}; - -enum ieee80211_state { - - /* the card is not linked at all */ - IEEE80211_NOLINK = 0, - - /* IEEE80211_ASSOCIATING* are for BSS client mode - * the driver shall not perform RX filtering unless - * the state is LINKED. - * The driver shall just check for the state LINKED and - * defaults to NOLINK for ALL the other states (including - * LINKED_SCANNING) - */ - - /* the association procedure will start (wq scheduling)*/ - IEEE80211_ASSOCIATING, - IEEE80211_ASSOCIATING_RETRY, - - /* the association procedure is sending AUTH request*/ - IEEE80211_ASSOCIATING_AUTHENTICATING, - - /* the association procedure has successfully authentcated - * and is sending association request - */ - IEEE80211_ASSOCIATING_AUTHENTICATED, - - /* the link is ok. the card associated to a BSS or linked - * to a ibss cell or acting as an AP and creating the bss - */ - IEEE80211_LINKED, - - /* same as LINKED, but the driver shall apply RX filter - * rules as we are in NO_LINK mode. As the card is still - * logically linked, but it is doing a syncro site survey - * then it will be back to LINKED state. - */ - IEEE80211_LINKED_SCANNING, - -}; - -#define DEFAULT_MAX_SCAN_AGE (15 * HZ) -#define DEFAULT_FTS 2346 -#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x" -#define MAC_ARG(x) ((u8*)(x))[0],((u8*)(x))[1],((u8*)(x))[2],((u8*)(x))[3],((u8*)(x))[4],((u8*)(x))[5] - - -#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,11)) -extern inline int is_multicast_ether_addr(const u8 *addr) -{ - return ((addr[0] != 0xff) && (0x01 & addr[0])); -} -#endif - -#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,13)) -extern inline int is_broadcast_ether_addr(const u8 *addr) -{ - return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) && \ - (addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff)); -} -#endif - -#define CFG_IEEE80211_RESERVE_FCS (1<<0) -#define CFG_IEEE80211_COMPUTE_FCS (1<<1) - -typedef struct tx_pending_t{ - int frag; - struct ieee80211_txb *txb; -}tx_pending_t; - - -struct ieee80211_device { - struct net_device *dev; - - /* Bookkeeping structures */ - struct net_device_stats stats; - struct ieee80211_stats ieee_stats; - struct ieee80211_softmac_stats softmac_stats; - - /* Probe / Beacon management */ - struct list_head network_free_list; - struct list_head network_list; - struct ieee80211_network *networks; - int scans; - int scan_age; - - int iw_mode; /* operating mode (IW_MODE_*) */ - - spinlock_t lock; - spinlock_t wpax_suitlist_lock; - - int tx_headroom; /* Set to size of any additional room needed at front - * of allocated Tx SKBs */ - u32 config; - - /* WEP and other encryption related settings at the device level */ - int open_wep; /* Set to 1 to allow unencrypted frames */ - - int reset_on_keychange; /* Set to 1 if the HW needs to be reset on - * WEP key changes */ - - /* If the host performs {en,de}cryption, then set to 1 */ - int host_encrypt; - int host_decrypt; - int ieee802_1x; /* is IEEE 802.1X used */ - - /* WPA data */ - int wpa_enabled; - int drop_unencrypted; - int tkip_countermeasures; - int privacy_invoked; - size_t wpa_ie_len; - u8 *wpa_ie; - - u8 ap_mac_addr[6]; - u16 pairwise_key_type; - u16 broadcast_key_type; - - struct list_head crypt_deinit_list; - struct ieee80211_crypt_data *crypt[WEP_KEYS]; - int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */ - struct timer_list crypt_deinit_timer; - - int bcrx_sta_key; /* use individual keys to override default keys even - * with RX of broad/multicast frames */ - - /* Fragmentation structures */ - // each streaming contain a entry - struct ieee80211_frag_entry frag_cache[17][IEEE80211_FRAG_CACHE_LEN]; - unsigned int frag_next_idx[17]; - u16 fts; /* Fragmentation Threshold */ - - /* This stores infos for the current network. - * Either the network we are associated in INFRASTRUCTURE - * or the network that we are creating in MASTER mode. - * ad-hoc is a mixture ;-). - * Note that in infrastructure mode, even when not associated, - * fields bssid and essid may be valid (if wpa_set and essid_set - * are true) as thy carry the value set by the user via iwconfig - */ - struct ieee80211_network current_network; - - - enum ieee80211_state state; - - int short_slot; - int mode; /* A, B, G */ - int modulation; /* CCK, OFDM */ - int freq_band; /* 2.4Ghz, 5.2Ghz, Mixed */ - int abg_true; /* ABG flag */ - - /* used for forcing the ibss workqueue to terminate - * without wait for the syncro scan to terminate - */ - short sync_scan_hurryup; - -#ifdef ENABLE_DOT11D - void * pDot11dInfo; - bool bGlobalDomain; - - // For Liteon Ch12~13 passive scan - u8 MinPassiveChnlNum; - u8 IbssStartChnl; -#else - /* map of allowed channels. 0 is dummy */ - // FIXME: remeber to default to a basic channel plan depending of the PHY type - int channel_map[MAX_CHANNEL_NUMBER+1]; -#endif - - int rate; /* current rate */ - int basic_rate; - //FIXME: pleace callback, see if redundant with softmac_features - short active_scan; - - /* this contains flags for selectively enable softmac support */ - u16 softmac_features; - - /* if the sequence control field is not filled by HW */ - u16 seq_ctrl[5]; - - /* association procedure transaction sequence number */ - u16 associate_seq; - - /* AID for RTXed association responses */ - u16 assoc_id; - - /* power save mode related*/ - short ps; - short sta_sleep; - int ps_timeout; - struct tasklet_struct ps_task; - u32 ps_th; - u32 ps_tl; - - short raw_tx; - /* used if IEEE_SOFTMAC_TX_QUEUE is set */ - short queue_stop; - short scanning; - short proto_started; - - struct semaphore wx_sem; - struct semaphore scan_sem; - - spinlock_t mgmt_tx_lock; - spinlock_t beacon_lock; - - short beacon_txing; - - short wap_set; - short ssid_set; - - u8 wpax_type_set; //{added by David, 2006.9.28} - u32 wpax_type_notify; //{added by David, 2006.9.26} - - /* QoS related flag */ - char init_wmmparam_flag; - - /* for discarding duplicated packets in IBSS */ - struct list_head ibss_mac_hash[IEEE_IBSS_MAC_HASH_SIZE]; - - /* for discarding duplicated packets in BSS */ - u16 last_rxseq_num[17]; /* rx seq previous per-tid */ - u16 last_rxfrag_num[17];/* tx frag previous per-tid */ - unsigned long last_packet_time[17]; - - /* for PS mode */ - unsigned long last_rx_ps_time; - - /* used if IEEE_SOFTMAC_SINGLE_QUEUE is set */ - struct sk_buff *mgmt_queue_ring[MGMT_QUEUE_NUM]; - int mgmt_queue_head; - int mgmt_queue_tail; - - - /* used if IEEE_SOFTMAC_TX_QUEUE is set */ - struct tx_pending_t tx_pending; - - /* used if IEEE_SOFTMAC_ASSOCIATE is set */ - struct timer_list associate_timer; - - /* used if IEEE_SOFTMAC_BEACONS is set */ - struct timer_list beacon_timer; - - struct work_struct associate_complete_wq; -// struct work_struct associate_retry_wq; - struct work_struct associate_procedure_wq; -// struct work_struct softmac_scan_wq; - struct work_struct wx_sync_scan_wq; - struct work_struct wmm_param_update_wq; - struct work_struct ps_request_tx_ack_wq;//for ps -// struct work_struct hw_wakeup_wq; -// struct work_struct hw_sleep_wq; -// struct work_struct watch_dog_wq; - bool bInactivePs; - bool actscanning; - bool beinretry; - u16 ListenInterval; - unsigned long NumRxDataInPeriod; //YJ,add,080828 - unsigned long NumRxBcnInPeriod; //YJ,add,080828 - unsigned long NumRxOkTotal; - unsigned long NumRxUnicast;//YJ,add,080828,for keep alive - bool bHwRadioOff; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) - struct delayed_work softmac_scan_wq; - struct delayed_work associate_retry_wq; - struct delayed_work hw_wakeup_wq; - struct delayed_work hw_sleep_wq;//+by amy 080324 - struct delayed_work watch_dog_wq; - struct delayed_work sw_antenna_wq; - struct delayed_work start_ibss_wq; -//by amy for rate adaptive 080312 - struct delayed_work rate_adapter_wq; -//by amy for rate adaptive - struct delayed_work hw_dig_wq; - struct delayed_work tx_pw_wq; - -//Added for RF power on power off by lizhaoming 080512 - struct delayed_work GPIOChangeRFWorkItem; -#else - - struct work_struct start_ibss_wq; - struct work_struct softmac_scan_wq; - struct work_struct associate_retry_wq; - struct work_struct hw_wakeup_wq; - struct work_struct hw_sleep_wq; - struct work_struct watch_dog_wq; - struct work_struct sw_antenna_wq; -//by amy for rate adaptive 080312 - struct work_struct rate_adapter_wq; -//by amy for rate adaptive - struct work_struct hw_dig_wq; - struct work_struct tx_pw_wq; - -//Added for RF power on power off by lizhaoming 080512 - struct work_struct GPIOChangeRFWorkItem; -#endif - struct workqueue_struct *wq; - - /* Callback functions */ - void (*set_security)(struct net_device *dev, - struct ieee80211_security *sec); - - /* Used to TX data frame by using txb structs. - * this is not used if in the softmac_features - * is set the flag IEEE_SOFTMAC_TX_QUEUE - */ - int (*hard_start_xmit)(struct ieee80211_txb *txb, - struct net_device *dev); - - int (*reset_port)(struct net_device *dev); - - /* Softmac-generated frames (mamagement) are TXed via this - * callback if the flag IEEE_SOFTMAC_SINGLE_QUEUE is - * not set. As some cards may have different HW queues that - * one might want to use for data and management frames - * the option to have two callbacks might be useful. - * This fucntion can't sleep. - */ - int (*softmac_hard_start_xmit)(struct sk_buff *skb, - struct net_device *dev); - - /* used instead of hard_start_xmit (not softmac_hard_start_xmit) - * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data - * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set - * then also management frames are sent via this callback. - * This function can't sleep. - */ - void (*softmac_data_hard_start_xmit)(struct sk_buff *skb, - struct net_device *dev,int rate); - - /* stops the HW queue for DATA frames. Useful to avoid - * waste time to TX data frame when we are reassociating - * This function can sleep. - */ - void (*data_hard_stop)(struct net_device *dev); - - /* OK this is complementar to data_poll_hard_stop */ - void (*data_hard_resume)(struct net_device *dev); - - /* ask to the driver to retune the radio . - * This function can sleep. the driver should ensure - * the radio has been swithced before return. - */ - void (*set_chan)(struct net_device *dev,short ch); - - /* These are not used if the ieee stack takes care of - * scanning (IEEE_SOFTMAC_SCAN feature set). - * In this case only the set_chan is used. - * - * The syncro version is similar to the start_scan but - * does not return until all channels has been scanned. - * this is called in user context and should sleep, - * it is called in a work_queue when swithcing to ad-hoc mode - * or in behalf of iwlist scan when the card is associated - * and root user ask for a scan. - * the fucntion stop_scan should stop both the syncro and - * background scanning and can sleep. - * The fucntion start_scan should initiate the background - * scanning and can't sleep. - */ - void (*scan_syncro)(struct net_device *dev); - void (*start_scan)(struct net_device *dev); - void (*stop_scan)(struct net_device *dev); - - /* indicate the driver that the link state is changed - * for example it may indicate the card is associated now. - * Driver might be interested in this to apply RX filter - * rules or simply light the LINK led - */ - void (*link_change)(struct net_device *dev); - - /* these two function indicates to the HW when to start - * and stop to send beacons. This is used when the - * IEEE_SOFTMAC_BEACONS is not set. For now the - * stop_send_bacons is NOT guaranteed to be called only - * after start_send_beacons. - */ - void (*start_send_beacons) (struct net_device *dev); - void (*stop_send_beacons) (struct net_device *dev); - - /* power save mode related */ - void (*sta_wake_up) (struct net_device *dev); - void (*ps_request_tx_ack) (struct net_device *dev); - void (*enter_sleep_state) (struct net_device *dev, u32 th, u32 tl); - short (*ps_is_queue_empty) (struct net_device *dev); - - /* QoS related */ - //void (*wmm_param_update) (struct net_device *dev, u8 *ac_param); - //void (*wmm_param_update) (struct ieee80211_device *ieee); - - /* This must be the last item so that it points to the data - * allocated beyond this structure by alloc_ieee80211 */ - u8 priv[0]; -}; - -#define IEEE_A (1<<0) -#define IEEE_B (1<<1) -#define IEEE_G (1<<2) -#define IEEE_MODE_MASK (IEEE_A|IEEE_B|IEEE_G) - -/* Generate a 802.11 header */ - -/* Uses the channel change callback directly - * instead of [start/stop] scan callbacks - */ -#define IEEE_SOFTMAC_SCAN (1<<2) - -/* Perform authentication and association handshake */ -#define IEEE_SOFTMAC_ASSOCIATE (1<<3) - -/* Generate probe requests */ -#define IEEE_SOFTMAC_PROBERQ (1<<4) - -/* Generate respones to probe requests */ -#define IEEE_SOFTMAC_PROBERS (1<<5) - -/* The ieee802.11 stack will manages the netif queue - * wake/stop for the driver, taking care of 802.11 - * fragmentation. See softmac.c for details. */ -#define IEEE_SOFTMAC_TX_QUEUE (1<<7) - -/* Uses only the softmac_data_hard_start_xmit - * even for TX management frames. - */ -#define IEEE_SOFTMAC_SINGLE_QUEUE (1<<8) - -/* Generate beacons. The stack will enqueue beacons - * to the card - */ -#define IEEE_SOFTMAC_BEACONS (1<<6) - - - -static inline void *ieee80211_priv(struct net_device *dev) -{ - return ((struct ieee80211_device *)netdev_priv(dev))->priv; -} - -extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len) -{ - /* Single white space is for Linksys APs */ - if (essid_len == 1 && essid[0] == ' ') - return 1; - - /* Otherwise, if the entire essid is 0, we assume it is hidden */ - while (essid_len) { - essid_len--; - if (essid[essid_len] != '\0') - return 0; - } - - return 1; -} - -extern inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, int mode) -{ - /* - * It is possible for both access points and our device to support - * combinations of modes, so as long as there is one valid combination - * of ap/device supported modes, then return success - * - */ - if ((mode & IEEE_A) && - (ieee->modulation & IEEE80211_OFDM_MODULATION) && - (ieee->freq_band & IEEE80211_52GHZ_BAND)) - return 1; - - if ((mode & IEEE_G) && - (ieee->modulation & IEEE80211_OFDM_MODULATION) && - (ieee->freq_band & IEEE80211_24GHZ_BAND)) - return 1; - - if ((mode & IEEE_B) && - (ieee->modulation & IEEE80211_CCK_MODULATION) && - (ieee->freq_band & IEEE80211_24GHZ_BAND)) - return 1; - - return 0; -} - -extern inline int ieee80211_get_hdrlen(u16 fc) -{ - int hdrlen = 24; - - switch (WLAN_FC_GET_TYPE(fc)) { - case IEEE80211_FTYPE_DATA: - if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS)) - hdrlen = 30; /* Addr4 */ - if(IEEE80211_QOS_HAS_SEQ(fc)) - hdrlen += 2; /* QOS ctrl*/ - break; - case IEEE80211_FTYPE_CTL: - switch (WLAN_FC_GET_STYPE(fc)) { - case IEEE80211_STYPE_CTS: - case IEEE80211_STYPE_ACK: - hdrlen = 10; - break; - default: - hdrlen = 16; - break; - } - break; - } - - return hdrlen; -} - - - -/* ieee80211.c */ -extern void free_ieee80211(struct net_device *dev); -extern struct net_device *alloc_ieee80211(int sizeof_priv); - -extern int ieee80211_set_encryption(struct ieee80211_device *ieee); - -/* ieee80211_tx.c */ - -extern int ieee80211_encrypt_fragment( - struct ieee80211_device *ieee, - struct sk_buff *frag, - int hdr_len); - -extern int ieee80211_xmit(struct sk_buff *skb, - struct net_device *dev); -extern void ieee80211_txb_free(struct ieee80211_txb *); - - -/* ieee80211_rx.c */ -extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, - struct ieee80211_rx_stats *rx_stats); -extern void ieee80211_rx_mgt(struct ieee80211_device *ieee, - struct ieee80211_hdr *header, - struct ieee80211_rx_stats *stats); - -/* ieee80211_wx.c */ -extern int ieee80211_wx_get_scan(struct ieee80211_device *ieee, - struct iw_request_info *info, - union iwreq_data *wrqu, char *key); -extern int ieee80211_wx_set_encode(struct ieee80211_device *ieee, - struct iw_request_info *info, - union iwreq_data *wrqu, char *key); -extern int ieee80211_wx_get_encode(struct ieee80211_device *ieee, - struct iw_request_info *info, - union iwreq_data *wrqu, char *key); -extern int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, - struct iw_request_info *info, - union iwreq_data* wrqu, char *extra); -int ieee80211_wx_set_auth(struct ieee80211_device *ieee, - struct iw_request_info *info, - struct iw_param *data, char *extra); -int ieee80211_wx_set_mlme(struct ieee80211_device *ieee, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra); - -int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len); -/* ieee80211_softmac.c */ -extern short ieee80211_is_54g(struct ieee80211_network net); -extern short ieee80211_is_shortslot(struct ieee80211_network net); -extern int ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb, - struct ieee80211_rx_stats *rx_stats, u16 type, - u16 stype); -extern void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee80211_network *net); - -extern void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device *ieee); -extern void ieee80211_softmac_check_all_nets(struct ieee80211_device *ieee); -extern void ieee80211_start_bss(struct ieee80211_device *ieee); -extern void ieee80211_start_master_bss(struct ieee80211_device *ieee); -extern void ieee80211_start_ibss(struct ieee80211_device *ieee); -extern void ieee80211_softmac_init(struct ieee80211_device *ieee); -extern void ieee80211_softmac_free(struct ieee80211_device *ieee); -extern void ieee80211_associate_abort(struct ieee80211_device *ieee); -extern void ieee80211_disassociate(struct ieee80211_device *ieee); -extern void ieee80211_stop_scan(struct ieee80211_device *ieee); -extern void ieee80211_start_scan_syncro(struct ieee80211_device *ieee); -extern void ieee80211_check_all_nets(struct ieee80211_device *ieee); -extern void ieee80211_start_protocol(struct ieee80211_device *ieee); -extern void ieee80211_stop_protocol(struct ieee80211_device *ieee); -extern void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee); -extern void ieee80211_softmac_stop_protocol(struct ieee80211_device *ieee); -extern void ieee80211_reset_queue(struct ieee80211_device *ieee); -extern void ieee80211_wake_queue(struct ieee80211_device *ieee); -extern void ieee80211_stop_queue(struct ieee80211_device *ieee); -extern struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee); -extern void ieee80211_start_send_beacons(struct ieee80211_device *ieee); -extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee); -extern int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device *ieee, struct iw_point *p); -extern void notify_wx_assoc_event(struct ieee80211_device *ieee); -extern void ieee80211_ps_tx_ack(struct ieee80211_device *ieee, short success); -extern void SendDisassociation(struct ieee80211_device *ieee,u8* asSta,u8 asRsn); -extern void ieee80211_start_scan(struct ieee80211_device *ieee); - -//Add for RF power on power off by lizhaoming 080512 -extern void SendDisassociation(struct ieee80211_device *ieee, - u8* asSta, - u8 asRsn); - -/* ieee80211_crypt_ccmp&tkip&wep.c */ -extern void ieee80211_tkip_null(void); -extern void ieee80211_wep_null(void); -extern void ieee80211_ccmp_null(void); -/* ieee80211_softmac_wx.c */ - -extern int ieee80211_wx_get_wap(struct ieee80211_device *ieee, - struct iw_request_info *info, - union iwreq_data *wrqu, char *ext); - -extern int ieee80211_wx_set_wap(struct ieee80211_device *ieee, - struct iw_request_info *info, - union iwreq_data *awrq, - char *extra); - -extern int ieee80211_wx_get_essid(struct ieee80211_device *ieee, struct iw_request_info *a,union iwreq_data *wrqu,char *b); - -extern int ieee80211_wx_set_rate(struct ieee80211_device *ieee, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra); - -extern int ieee80211_wx_get_rate(struct ieee80211_device *ieee, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra); - -extern int ieee80211_wx_set_mode(struct ieee80211_device *ieee, struct iw_request_info *a, - union iwreq_data *wrqu, char *b); - -extern int ieee80211_wx_set_scan(struct ieee80211_device *ieee, struct iw_request_info *a, - union iwreq_data *wrqu, char *b); - -extern int ieee80211_wx_set_essid(struct ieee80211_device *ieee, - struct iw_request_info *a, - union iwreq_data *wrqu, char *extra); - -extern int ieee80211_wx_get_mode(struct ieee80211_device *ieee, struct iw_request_info *a, - union iwreq_data *wrqu, char *b); - -extern int ieee80211_wx_set_freq(struct ieee80211_device *ieee, struct iw_request_info *a, - union iwreq_data *wrqu, char *b); - -extern int ieee80211_wx_get_freq(struct ieee80211_device *ieee, struct iw_request_info *a, - union iwreq_data *wrqu, char *b); -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)) -extern void ieee80211_wx_sync_scan_wq(struct work_struct *work); -#else - extern void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee); -#endif -//extern void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee); - -extern int ieee80211_wx_set_rawtx(struct ieee80211_device *ieee, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra); - -extern int ieee80211_wx_get_name(struct ieee80211_device *ieee, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra); - -extern int ieee80211_wx_set_power(struct ieee80211_device *ieee, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra); - -extern int ieee80211_wx_get_power(struct ieee80211_device *ieee, - struct iw_request_info *info, - union iwreq_data *wrqu, char *extra); - -extern void ieee80211_softmac_ips_scan_syncro(struct ieee80211_device *ieee); - -extern void ieee80211_sta_ps_send_null_frame(struct ieee80211_device *ieee, short pwr); - -extern const long ieee80211_wlan_frequencies[]; - -extern inline void ieee80211_increment_scans(struct ieee80211_device *ieee) -{ - ieee->scans++; -} - -extern inline int ieee80211_get_scans(struct ieee80211_device *ieee) -{ - return ieee->scans; -} - -static inline const char *escape_essid(const char *essid, u8 essid_len) { - static char escaped[IW_ESSID_MAX_SIZE * 2 + 1]; - const char *s = essid; - char *d = escaped; - - if (ieee80211_is_empty_essid(essid, essid_len)) { - memcpy(escaped, "", sizeof("")); - return escaped; - } - - essid_len = min(essid_len, (u8)IW_ESSID_MAX_SIZE); - while (essid_len--) { - if (*s == '\0') { - *d++ = '\\'; - *d++ = '0'; - s++; - } else { - *d++ = *s++; - } - } - *d = '\0'; - return escaped; -} -#endif /* IEEE80211_H */ --- a/drivers/staging/rtl8187se/r8180_core.c +++ b/drivers/staging/rtl8187se/r8180_core.c @@ -79,7 +79,7 @@ double __extendsfdf2(float a) {return a; #endif #ifdef ENABLE_DOT11D -#include "dot11d.h" +#include "ieee80211/dot11d.h" #endif #ifdef CONFIG_RTL8185B --- a/drivers/staging/rtl8187se/r8180.h +++ b/drivers/staging/rtl8187se/r8180.h @@ -41,7 +41,7 @@ #include #include // Necessary because we use the proc fs #include -#include "ieee80211.h" +#include "ieee80211/ieee80211.h" #include //#include --- a/drivers/staging/rtl8187se/r8180_rtl8225z2.c +++ b/drivers/staging/rtl8187se/r8180_rtl8225z2.c @@ -15,7 +15,7 @@ #include "r8180_93cx6.h" #ifdef ENABLE_DOT11D -#include "dot11d.h" +#include "ieee80211/dot11d.h" #endif #ifdef CONFIG_RTL8185B --- a/drivers/staging/rtl8187se/r8180_wx.c +++ b/drivers/staging/rtl8187se/r8180_wx.c @@ -23,7 +23,7 @@ #include "r8180_sa2400.h" #ifdef ENABLE_DOT11D -#include "dot11d.h" +#include "ieee80211/dot11d.h" #endif //#define RATE_COUNT 4 --- a/drivers/staging/rtl8187se/r8180_wx.h +++ b/drivers/staging/rtl8187se/r8180_wx.h @@ -15,7 +15,7 @@ #ifndef R8180_WX_H #define R8180_WX_H #include -#include "ieee80211.h" +#include "ieee80211/ieee80211.h" extern struct iw_handler_def r8180_wx_handlers_def; #endif --- a/drivers/staging/rtl8187se/r8185b_init.c +++ b/drivers/staging/rtl8187se/r8185b_init.c @@ -35,7 +35,7 @@ Notes: #endif #ifdef ENABLE_DOT11D -#include "dot11d.h" +#include "ieee80211/dot11d.h" #endif #ifdef CONFIG_RTL8185B