From bzolnier@gmail.com Mon Aug 17 14:17:26 2009 From: Bartlomiej Zolnierkiewicz Date: Sun, 16 Aug 2009 21:31:56 +0200 Subject: Staging: rtxxx0: remove private debugging ioctls To: "Greg Kroah-Hartman" Cc: devel@driverdev.osuosl.org, Bartlomiej Zolnierkiewicz , linux-kernel@vger.kernel.org Message-ID: <20090816193156.3789.86009.sendpatchset@localhost.localdomain> From: Bartlomiej Zolnierkiewicz Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rt2860/oid.h | 7 drivers/staging/rt2860/sta_ioctl.c | 775 ------------------------------------- 2 files changed, 782 deletions(-) --- a/drivers/staging/rt2860/oid.h +++ b/drivers/staging/rt2860/oid.h @@ -627,13 +627,6 @@ typedef struct _NDIS_802_11_CAPABILITY #define RT_PRIV_IOCTL_EXT (SIOCIWFIRSTPRIV + 0x01) // Sync. with AP for wsc upnp daemon #define RTPRIV_IOCTL_SET (SIOCIWFIRSTPRIV + 0x02) -#ifdef DBG -#define RTPRIV_IOCTL_BBP (SIOCIWFIRSTPRIV + 0x03) -#define RTPRIV_IOCTL_MAC (SIOCIWFIRSTPRIV + 0x05) -#define RTPRIV_IOCTL_RF (SIOCIWFIRSTPRIV + 0x13) -#define RTPRIV_IOCTL_E2P (SIOCIWFIRSTPRIV + 0x07) -#endif - #define RTPRIV_IOCTL_STATISTICS (SIOCIWFIRSTPRIV + 0x09) #define RTPRIV_IOCTL_ADD_PMKID_CACHE (SIOCIWFIRSTPRIV + 0x0A) #define RTPRIV_IOCTL_RADIUS_DATA (SIOCIWFIRSTPRIV + 0x0C) --- a/drivers/staging/rt2860/sta_ioctl.c +++ b/drivers/staging/rt2860/sta_ioctl.c @@ -93,23 +93,6 @@ struct iw_priv_args privtab[] = { #endif /* --- sub-ioctls relations --- */ -#ifdef DBG -{ RTPRIV_IOCTL_BBP, - IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, - "bbp"}, -{ RTPRIV_IOCTL_MAC, - IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | 1024, - "mac"}, -#ifdef RT30xx -{ RTPRIV_IOCTL_RF, - IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, - "rf"}, -#endif // RT30xx // -{ RTPRIV_IOCTL_E2P, - IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | 1024, - "e2p"}, -#endif /* DBG */ - { RTPRIV_IOCTL_STATISTICS, 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "stat"}, @@ -173,29 +156,6 @@ INT Set_Wpa_Support( IN PRTMP_ADAPTER pAd, IN PUCHAR arg); -#ifdef DBG -#if !defined(RT2860) && !defined(RT30xx) -VOID RTMPIoctlBBP( - IN PRTMP_ADAPTER pAdapter, - IN struct iwreq *wrq); -#endif - -VOID RTMPIoctlMAC( - IN PRTMP_ADAPTER pAdapter, - IN struct iwreq *wrq); - -VOID RTMPIoctlE2PROM( - IN PRTMP_ADAPTER pAdapter, - IN struct iwreq *wrq); - -#ifdef RT30xx -VOID RTMPIoctlRF( - IN PRTMP_ADAPTER pAdapter, - IN struct iwreq *wrq); -#endif // RT30xx // -#endif // DBG // - - NDIS_STATUS RTMPWPANoneAddKeyProc( IN PRTMP_ADAPTER pAd, IN PVOID pBuf); @@ -2543,138 +2503,6 @@ int rt_ioctl_siwpmksa(struct net_device return 0; } -#ifdef DBG -static int -rt_private_ioctl_bbp(struct net_device *dev, struct iw_request_info *info, - struct iw_point *wrq, char *extra) - { - CHAR *this_char; - CHAR *value = NULL; - UCHAR regBBP = 0; - UINT32 bbpId; - UINT32 bbpValue; - BOOLEAN bIsPrintAllBBP = FALSE; - INT Status = 0; - PRTMP_ADAPTER pAdapter = dev->ml_priv; - - - memset(extra, 0x00, IW_PRIV_SIZE_MASK); - - if (wrq->length > 1) //No parameters. - { - sprintf(extra, "\n"); - - //Parsing Read or Write - this_char = wrq->pointer; - DBGPRINT(RT_DEBUG_TRACE, ("this_char=%s\n", this_char)); - if (!*this_char) - goto next; - - if ((value = rtstrchr(this_char, '=')) != NULL) - *value++ = 0; - - if (!value || !*value) - { //Read - DBGPRINT(RT_DEBUG_TRACE, ("this_char=%s, value=%s\n", this_char, value)); - if (sscanf(this_char, "%d", &(bbpId)) == 1) - { -#ifndef RT30xx - if (bbpId <= 136) -#endif // RT30xx // -#ifdef RT30xx - if (bbpId <= 138) // edit by johnli, RF power sequence setup, add BBP R138 for ADC dynamic on/off control -#endif // RT30xx // - { - { - RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP); - } - sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X\n", bbpId, bbpId*2, regBBP); - wrq->length = strlen(extra) + 1; // 1: size of '\0' - DBGPRINT(RT_DEBUG_TRACE, ("msg=%s\n", extra)); - } - else - {//Invalid parametes, so default printk all bbp - bIsPrintAllBBP = TRUE; - goto next; - } - } - else - { //Invalid parametes, so default printk all bbp - bIsPrintAllBBP = TRUE; - goto next; - } - } - else - { //Write - if ((sscanf(this_char, "%d", &(bbpId)) == 1) && (sscanf(value, "%x", &(bbpValue)) == 1)) - { -#ifndef RT30xx - if (bbpId <= 136) -#endif // RT30xx // -#ifdef RT30xx - if (bbpId <= 138) // edit by johnli, RF power sequence setup, add BBP R138 for ADC dynamic on/off control -#endif // RT30xx // - { - { - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue); - //Read it back for showing - RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP); - } - sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X\n", bbpId, bbpId*2, regBBP); - wrq->length = strlen(extra) + 1; // 1: size of '\0' - DBGPRINT(RT_DEBUG_TRACE, ("msg=%s\n", extra)); - } - else - {//Invalid parametes, so default printk all bbp - bIsPrintAllBBP = TRUE; - goto next; - } - } - else - { //Invalid parametes, so default printk all bbp - bIsPrintAllBBP = TRUE; - goto next; - } - } - } - else - bIsPrintAllBBP = TRUE; - -next: - if (bIsPrintAllBBP) - { - memset(extra, 0x00, IW_PRIV_SIZE_MASK); - sprintf(extra, "\n"); -#ifndef RT30xx - for (bbpId = 0; bbpId <= 136; bbpId++) -#endif // RT30xx // -#ifdef RT30xx - for (bbpId = 0; bbpId <= 138; bbpId++) // edit by johnli, RF power sequence setup, add BBP R138 for ADC dynamic on/off control -#endif // RT30xx // - { - if (strlen(extra) >= (IW_PRIV_SIZE_MASK - 10)) - break; - RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP); -#ifndef RT30xx - sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X ", bbpId, bbpId*2, regBBP); - if (bbpId%5 == 4) - sprintf(extra+strlen(extra), "\n"); -#endif -#ifdef RT30xx - sprintf(extra+strlen(extra), "%03d = %02X\n", bbpId, regBBP); // edit by johnli, change display format -#endif - } - - wrq->length = strlen(extra) + 1; // 1: size of '\0' - DBGPRINT(RT_DEBUG_TRACE, ("wrq->length = %d\n", wrq->length)); - } - - DBGPRINT(RT_DEBUG_TRACE, ("<==rt_private_ioctl_bbp\n\n")); - - return Status; -} -#endif // DBG // - int rt_ioctl_siwrate(struct net_device *dev, struct iw_request_info *info, union iwreq_data *wrqu, char *extra) @@ -2848,11 +2676,7 @@ static const iw_handler rt_priv_handlers (iw_handler) NULL, /* + 0x00 */ (iw_handler) NULL, /* + 0x01 */ (iw_handler) rt_ioctl_setparam, /* + 0x02 */ -#ifdef DBG - (iw_handler) rt_private_ioctl_bbp, /* + 0x03 */ -#else (iw_handler) NULL, /* + 0x03 */ -#endif (iw_handler) NULL, /* + 0x04 */ (iw_handler) NULL, /* + 0x05 */ (iw_handler) NULL, /* + 0x06 */ @@ -4911,19 +4735,6 @@ INT rt28xx_sta_ioctl( case RTPRIV_IOCTL_GSITESURVEY: RTMPIoctlGetSiteSurvey(pAd, wrq); break; -#ifdef DBG - case RTPRIV_IOCTL_MAC: - RTMPIoctlMAC(pAd, wrq); - break; - case RTPRIV_IOCTL_E2P: - RTMPIoctlE2PROM(pAd, wrq); - break; -#ifdef RT30xx - case RTPRIV_IOCTL_RF: - RTMPIoctlRF(pAd, wrq); - break; -#endif // RT30xx // -#endif // DBG // case SIOCETHTOOL: break; default: @@ -5822,592 +5633,6 @@ INT Set_Wpa_Support( return TRUE; } -#ifdef DBG -/* - ========================================================================== - Description: - Read / Write MAC - Arguments: - pAdapter Pointer to our adapter - wrq Pointer to the ioctl argument - - Return Value: - None - - Note: - Usage: - 1.) iwpriv ra0 mac 0 ==> read MAC where Addr=0x0 - 2.) iwpriv ra0 mac 0=12 ==> write MAC where Addr=0x0, value=12 - ========================================================================== -*/ -VOID RTMPIoctlMAC( - IN PRTMP_ADAPTER pAdapter, - IN struct iwreq *wrq) -{ - CHAR *this_char; - CHAR *value; - INT j = 0, k = 0; - CHAR msg[1024]; - CHAR arg[255]; - ULONG macAddr = 0; - UCHAR temp[16], temp2[16]; - UINT32 macValue = 0; - INT Status; -#ifdef RT30xx - BOOLEAN bIsPrintAllMAC = FALSE; -#endif - - memset(msg, 0x00, 1024); - if (wrq->u.data.length > 1) //No parameters. - { - Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length); - sprintf(msg, "\n"); - - //Parsing Read or Write - this_char = arg; - if (!*this_char) - goto next; - - if ((value = rtstrchr(this_char, '=')) != NULL) - *value++ = 0; - - if (!value || !*value) - { //Read - // Sanity check - if(strlen(this_char) > 4) - goto next; - - j = strlen(this_char); - while(j-- > 0) - { - if(this_char[j] > 'f' || this_char[j] < '0') - return; - } - - // Mac Addr - k = j = strlen(this_char); - while(j-- > 0) - { - this_char[4-k+j] = this_char[j]; - } - - while(k < 4) - this_char[3-k++]='0'; - this_char[4]='\0'; - - if(strlen(this_char) == 4) - { - AtoH(this_char, temp, 2); - macAddr = *temp*256 + temp[1]; - if (macAddr < 0xFFFF) - { - RTMP_IO_READ32(pAdapter, macAddr, &macValue); - DBGPRINT(RT_DEBUG_TRACE, ("MacAddr=%lx, MacValue=%x\n", macAddr, macValue)); - sprintf(msg+strlen(msg), "[0x%08lX]:%08X ", macAddr , macValue); - } - else -#ifndef RT30xx - {//Invalid parametes, so default printk all bbp -#endif -#ifdef RT30xx - {//Invalid parametes, so default printk all mac - bIsPrintAllMAC = TRUE; -#endif - goto next; - } - } - } - else - { //Write - memcpy(&temp2, value, strlen(value)); - temp2[strlen(value)] = '\0'; - - // Sanity check - if((strlen(this_char) > 4) || strlen(temp2) > 8) - goto next; - - j = strlen(this_char); - while(j-- > 0) - { - if(this_char[j] > 'f' || this_char[j] < '0') - return; - } - - j = strlen(temp2); - while(j-- > 0) - { - if(temp2[j] > 'f' || temp2[j] < '0') - return; - } - - //MAC Addr - k = j = strlen(this_char); - while(j-- > 0) - { - this_char[4-k+j] = this_char[j]; - } - - while(k < 4) - this_char[3-k++]='0'; - this_char[4]='\0'; - - //MAC value - k = j = strlen(temp2); - while(j-- > 0) - { - temp2[8-k+j] = temp2[j]; - } - - while(k < 8) - temp2[7-k++]='0'; - temp2[8]='\0'; - - { - AtoH(this_char, temp, 2); - macAddr = *temp*256 + temp[1]; - - AtoH(temp2, temp, 4); - macValue = *temp*256*256*256 + temp[1]*256*256 + temp[2]*256 + temp[3]; - - // debug mode - if (macAddr == (HW_DEBUG_SETTING_BASE + 4)) - { - // 0x2bf4: byte0 non-zero: enable R17 tuning, 0: disable R17 tuning - if (macValue & 0x000000ff) - { - pAdapter->BbpTuning.bEnable = TRUE; - DBGPRINT(RT_DEBUG_TRACE,("turn on R17 tuning\n")); - } - else - { - UCHAR R66; - pAdapter->BbpTuning.bEnable = FALSE; - R66 = 0x26 + GET_LNA_GAIN(pAdapter); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter))); - DBGPRINT(RT_DEBUG_TRACE,("turn off R17 tuning, restore to 0x%02x\n", R66)); - } - return; - } - - DBGPRINT(RT_DEBUG_TRACE, ("MacAddr=%02lx, MacValue=0x%x\n", macAddr, macValue)); - - RTMP_IO_WRITE32(pAdapter, macAddr, macValue); - sprintf(msg+strlen(msg), "[0x%08lX]:%08X ", macAddr, macValue); - } - } - } -#ifdef RT30xx - else - bIsPrintAllMAC = TRUE; -#endif -next: -#ifdef RT30xx - if (bIsPrintAllMAC) - { - struct file *file_w; - PCHAR fileName = "MacDump.txt"; - mm_segment_t orig_fs; - - orig_fs = get_fs(); - set_fs(KERNEL_DS); - - // open file - file_w = filp_open(fileName, O_WRONLY|O_CREAT, 0); - if (IS_ERR(file_w)) - { - DBGPRINT(RT_DEBUG_TRACE, ("-->2) %s: Error %ld opening %s\n", __func__, -PTR_ERR(file_w), fileName)); - } - else - { - if (file_w->f_op && file_w->f_op->write) - { - file_w->f_pos = 0; - macAddr = 0x1000; - - while (macAddr <= 0x1800) - { - RTMP_IO_READ32(pAdapter, macAddr, &macValue); - sprintf(msg, "%08lx = %08X\n", macAddr, macValue); - - // write data to file - file_w->f_op->write(file_w, msg, strlen(msg), &file_w->f_pos); - - printk("%s", msg); - macAddr += 4; - } - sprintf(msg, "\nDump all MAC values to %s\n", fileName); - } - filp_close(file_w, NULL); - } - set_fs(orig_fs); - } -#endif /* RT30xx */ - if(strlen(msg) == 1) - sprintf(msg+strlen(msg), "===>Error command format!"); - - // Copy the information into the user buffer - wrq->u.data.length = strlen(msg); - Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length); - - DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlMAC\n\n")); -} - -/* - ========================================================================== - Description: - Read / Write E2PROM - Arguments: - pAdapter Pointer to our adapter - wrq Pointer to the ioctl argument - - Return Value: - None - - Note: - Usage: - 1.) iwpriv ra0 e2p 0 ==> read E2PROM where Addr=0x0 - 2.) iwpriv ra0 e2p 0=1234 ==> write E2PROM where Addr=0x0, value=1234 - ========================================================================== -*/ -VOID RTMPIoctlE2PROM( - IN PRTMP_ADAPTER pAdapter, - IN struct iwreq *wrq) -{ - CHAR *this_char; - CHAR *value; - INT j = 0, k = 0; - CHAR msg[1024]; - CHAR arg[255]; - USHORT eepAddr = 0; - UCHAR temp[16], temp2[16]; - USHORT eepValue; - int Status; -#ifdef RT30xx - BOOLEAN bIsPrintAllE2P = FALSE; -#endif - - memset(msg, 0x00, 1024); - if (wrq->u.data.length > 1) //No parameters. - { - Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length); - sprintf(msg, "\n"); - - //Parsing Read or Write - this_char = arg; - - - if (!*this_char) - goto next; - - if ((value = rtstrchr(this_char, '=')) != NULL) - *value++ = 0; - - if (!value || !*value) - { //Read - - // Sanity check - if(strlen(this_char) > 4) - goto next; - - j = strlen(this_char); - while(j-- > 0) - { - if(this_char[j] > 'f' || this_char[j] < '0') - return; - } - - // E2PROM addr - k = j = strlen(this_char); - while(j-- > 0) - { - this_char[4-k+j] = this_char[j]; - } - - while(k < 4) - this_char[3-k++]='0'; - this_char[4]='\0'; - - if(strlen(this_char) == 4) - { - AtoH(this_char, temp, 2); - eepAddr = *temp*256 + temp[1]; - if (eepAddr < 0xFFFF) - { - RT28xx_EEPROM_READ16(pAdapter, eepAddr, eepValue); - sprintf(msg+strlen(msg), "[0x%04X]:0x%04X ", eepAddr , eepValue); - } - else - {//Invalid parametes, so default printk all bbp -#ifdef RT30xx - bIsPrintAllE2P = TRUE; -#endif - goto next; - } - } - } - else - { //Write - memcpy(&temp2, value, strlen(value)); - temp2[strlen(value)] = '\0'; - - // Sanity check - if((strlen(this_char) > 4) || strlen(temp2) > 8) - goto next; - - j = strlen(this_char); - while(j-- > 0) - { - if(this_char[j] > 'f' || this_char[j] < '0') - return; - } - j = strlen(temp2); - while(j-- > 0) - { - if(temp2[j] > 'f' || temp2[j] < '0') - return; - } - - //MAC Addr - k = j = strlen(this_char); - while(j-- > 0) - { - this_char[4-k+j] = this_char[j]; - } - - while(k < 4) - this_char[3-k++]='0'; - this_char[4]='\0'; - - //MAC value - k = j = strlen(temp2); - while(j-- > 0) - { - temp2[4-k+j] = temp2[j]; - } - - while(k < 4) - temp2[3-k++]='0'; - temp2[4]='\0'; - - AtoH(this_char, temp, 2); - eepAddr = *temp*256 + temp[1]; - - AtoH(temp2, temp, 2); - eepValue = *temp*256 + temp[1]; - - RT28xx_EEPROM_WRITE16(pAdapter, eepAddr, eepValue); - sprintf(msg+strlen(msg), "[0x%02X]:%02X ", eepAddr, eepValue); - } - } -#ifdef RT30xx - else - bIsPrintAllE2P = TRUE; -#endif -next: -#ifdef RT30xx - if (bIsPrintAllE2P) - { - struct file *file_w; - PCHAR fileName = "EEPROMDump.txt"; - mm_segment_t orig_fs; - - orig_fs = get_fs(); - set_fs(KERNEL_DS); - - // open file - file_w = filp_open(fileName, O_WRONLY|O_CREAT, 0); - if (IS_ERR(file_w)) - { - DBGPRINT(RT_DEBUG_TRACE, ("-->2) %s: Error %ld opening %s\n", __func__, -PTR_ERR(file_w), fileName)); - } - else - { - if (file_w->f_op && file_w->f_op->write) - { - file_w->f_pos = 0; - eepAddr = 0x00; - - while (eepAddr <= 0xFE) - { - RT28xx_EEPROM_READ16(pAdapter, eepAddr, eepValue); - sprintf(msg, "%08x = %04x\n", eepAddr , eepValue); - - // write data to file - file_w->f_op->write(file_w, msg, strlen(msg), &file_w->f_pos); - - printk("%s", msg); - eepAddr += 2; - } - sprintf(msg, "\nDump all EEPROM values to %s\n", fileName); - } - filp_close(file_w, NULL); - } - set_fs(orig_fs); - } -#endif /* RT30xx */ - if(strlen(msg) == 1) - sprintf(msg+strlen(msg), "===>Error command format!"); - - - // Copy the information into the user buffer - wrq->u.data.length = strlen(msg); - Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length); - - DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlE2PROM\n")); -} -#ifdef RT30xx -/* - ========================================================================== - Description: - Read / Write RF register -Arguments: - pAdapter Pointer to our adapter - wrq Pointer to the ioctl argument - - Return Value: - None - - Note: - Usage: - 1.) iwpriv ra0 rf ==> read all RF registers - 2.) iwpriv ra0 rf 1 ==> read RF where RegID=1 - 3.) iwpriv ra0 rf 1=10 ==> write RF R1=0x10 - ========================================================================== -*/ -VOID RTMPIoctlRF( - IN PRTMP_ADAPTER pAdapter, - IN struct iwreq *wrq) -{ - CHAR *this_char; - CHAR *value; - UCHAR regRF = 0; - CHAR msg[2048]; - CHAR arg[255]; - INT rfId; - LONG rfValue; - int Status; - BOOLEAN bIsPrintAllRF = FALSE; - - - memset(msg, 0x00, 2048); - if (wrq->u.data.length > 1) //No parameters. - { - Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length); - sprintf(msg, "\n"); - - //Parsing Read or Write - this_char = arg; - if (!*this_char) - goto next; - - if ((value = strchr(this_char, '=')) != NULL) - *value++ = 0; - - if (!value || !*value) - { //Read - if (sscanf(this_char, "%d", &(rfId)) == 1) - { - if (rfId <= 31) - { - // In RT2860 ATE mode, we do not load 8051 firmware. - //We must access RF directly. - // For RT2870 ATE mode, ATE_RF_IO_WRITE8(/READ8)_BY_REG_ID are redefined. - // according to Andy, Gary, David require. - // the command rf shall read rf register directly for dubug. - // BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP); - RT30xxReadRFRegister(pAdapter, rfId, ®RF); - - sprintf(msg+strlen(msg), "R%02d[0x%02x]:%02X ", rfId, rfId*2, regRF); - } - else - {//Invalid parametes, so default printk all RF - bIsPrintAllRF = TRUE; - goto next; - } - } - else - { //Invalid parametes, so default printk all RF - bIsPrintAllRF = TRUE; - goto next; - } - } - else - { //Write - if ((sscanf(this_char, "%d", &(rfId)) == 1) && (sscanf(value, "%lx", &(rfValue)) == 1)) - { - if (rfId <= 31) - { - // In RT2860 ATE mode, we do not load 8051 firmware. - // We should access RF registers directly. - // For RT2870 ATE mode, ATE_RF_IO_WRITE8/READ8_BY_REG_ID are redefined. - { - // according to Andy, Gary, David require. - // the command RF shall read/write RF register directly for dubug. - //BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP); - //BBP_IO_WRITE8_BY_REG_ID(pAdapter, (UCHAR)bbpId,(UCHAR) bbpValue); - RT30xxReadRFRegister(pAdapter, rfId, ®RF); - RT30xxWriteRFRegister(pAdapter, (UCHAR)rfId,(UCHAR) rfValue); - //Read it back for showing - //BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP); - RT30xxReadRFRegister(pAdapter, rfId, ®RF); - sprintf(msg+strlen(msg), "R%02d[0x%02X]:%02X\n", rfId, rfId*2, regRF); - } - } - else - {//Invalid parametes, so default printk all RF - bIsPrintAllRF = TRUE; - } - } - else - { //Invalid parametes, so default printk all RF - bIsPrintAllRF = TRUE; - } - } - } - else - bIsPrintAllRF = TRUE; -next: - if (bIsPrintAllRF) - { - memset(msg, 0x00, 2048); - sprintf(msg, "\n"); - for (rfId = 0; rfId <= 31; rfId++) - { - // according to Andy, Gary, David require. - // the command RF shall read/write RF register directly for dubug. - RT30xxReadRFRegister(pAdapter, rfId, ®RF); - sprintf(msg+strlen(msg), "%03d = %02X\n", rfId, regRF); - } - // Copy the information into the user buffer - DBGPRINT(RT_DEBUG_TRACE, ("strlen(msg)=%d\n", (UINT32)strlen(msg))); - wrq->u.data.length = strlen(msg); - if (copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length)) - { - DBGPRINT(RT_DEBUG_TRACE, ("%s: copy_to_user() fail\n", __func__)); - } - } - else - { - if(strlen(msg) == 1) - sprintf(msg+strlen(msg), "===>Error command format!"); - - DBGPRINT(RT_DEBUG_TRACE, ("copy to user [msg=%s]\n", msg)); - // Copy the information into the user buffer - DBGPRINT(RT_DEBUG_TRACE, ("strlen(msg) =%d\n", (UINT32)strlen(msg))); - - // Copy the information into the user buffer - wrq->u.data.length = strlen(msg); - Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length); - } - - DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlRF\n\n")); -} -#endif // RT30xx // -#endif // DBG // - - - - INT Set_TGnWifiTest_Proc( IN PRTMP_ADAPTER pAd, IN PUCHAR arg)