From amit.kucheria@verdurent.com Thu Nov 19 11:35:00 2009 From: Amit Kucheria Date: Mon, 9 Nov 2009 15:10:15 +0200 Subject: Staging: iio: Fix typos in documentation Cc: Jonathan Cameron , Greg Kroah-Hartman Message-ID: <1257772215-1396-1-git-send-email-amit.kucheria@verdurent.com> Spell-check wouln't catch these :) Signed-off-by: Amit Kucheria Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/staging/iio/Documentation/device.txt | 4 ++-- drivers/staging/iio/Documentation/overview.txt | 9 +++++---- 2 files changed, 7 insertions(+), 6 deletions(-) --- a/drivers/staging/iio/Documentation/device.txt +++ b/drivers/staging/iio/Documentation/device.txt @@ -10,7 +10,7 @@ First allocate one using: struct iio_dev *indio_dev = iio_allocate_device(); -The fill in the following. +Then fill in the following: indio_dev->dev.parent the struct device associated with the underlying hardware. @@ -45,5 +45,5 @@ allocated prior to registering the devic be registered afterwards (otherwise the whole parentage of devices gets confused) -On remove iio_device_unregister(indio_dev) will remove the device from +On remove, iio_device_unregister(indio_dev) will remove the device from the core, and iio_free_device will clean up. --- a/drivers/staging/iio/Documentation/overview.txt +++ b/drivers/staging/iio/Documentation/overview.txt @@ -24,11 +24,12 @@ hwmon with simple polled access to devic * Event chrdevs. These are similar to input in that they provide a route to user space for hardware triggered events. Such events include threshold detectors, free-fall detectors and more complex action -detection. They events themselves are currently very simple with +detection. The events themselves are currently very simple with merely an event code and a timestamp. Any data associated with the -event must be accessed via polling. Note a given device may have one -or more event channel. These events are turned on or off (if possible) -via sysfs interfaces. +event must be accessed via polling. + +Note: A given device may have one or more event channel. These events are +turned on or off (if possible) via sysfs interfaces. * Hardware ring buffer support. Some recent sensors have included fifo / ring buffers on the sensor chip. These greatly reduce the load