From 03dff6265d0fa9bccf01c1036f72850d816080aa Mon Sep 17 00:00:00 2001 From: Florian Schilhabel Date: Wed, 14 Jul 2010 14:44:34 +0200 Subject: [PATCH 374/524] staging: rtl8192su: r8192U.h, clean header Signed-off-by: Florian Schilhabel Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192su/r8192U.h | 169 ++++-------------------------------- 1 files changed, 17 insertions(+), 152 deletions(-) diff --git a/drivers/staging/rtl8192su/r8192U.h b/drivers/staging/rtl8192su/r8192U.h index b87d1b4..ddf3cf1 100644 --- a/drivers/staging/rtl8192su/r8192U.h +++ b/drivers/staging/rtl8192su/r8192U.h @@ -20,14 +20,12 @@ #include #include -//#include #include #include #include #include #include #include -//#include #include #include #include @@ -51,9 +49,7 @@ #define RTL819X_EEPROM_CMD_CK (1 << 2) #define RTL819X_EEPROM_CMD_CS (1 << 3) -//#define RTL8192U #define RTL819xU_MODULE_NAME "rtl819xU" -//added for HW security, john.0629 #define FALSE 0 #define TRUE 1 #define MAX_KEY_LEN 61 @@ -137,10 +133,8 @@ do { if(rt_global_debug_component & component) \ #define COMP_SEC BIT20 // Event handling #define COMP_LED BIT21 // For LED. #define COMP_RF BIT22 // For RF. -//1!!!!!!!!!!!!!!!!!!!!!!!!!!! + #define COMP_RXDESC BIT23 // Show Rx desc information for SD3 debug. Added by Annie, 2006-07-15. -//1//1Attention Please!!!<11n or 8190 specific code should be put below this line> -//1!!!!!!!!!!!!!!!!!!!!!!!!!!! #define COMP_FIRMWARE BIT24 //for firmware downloading #define COMP_HT BIT25 // For 802.11n HT related information. by Emily 2006-8-11 @@ -159,8 +153,7 @@ do { if(rt_global_debug_component & component) \ printk( "Assertion failed! %s,%s,%s,line=%d\n", \ #expr,__FILE__,__FUNCTION__,__LINE__); \ } -//wb added to debug out data buf -//if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA + #define RT_DEBUG_DATA(level, data, datalen) \ do{ if ((rt_global_debug_component & (level)) == (level)) \ { \ @@ -180,25 +173,17 @@ do { if(rt_global_debug_component & component) \ #define RT_DEBUG_DATA(level, data, datalen) do {} while(0) #endif /* RTL8169_DEBUG */ -//#ifdef RTL8192SU //2TODO: We should define 8192S firmware related macro settings here!! #define RTL819X_DEFAULT_RF_TYPE RF_1T2R #define RTL819X_TOTAL_RF_PATH 2 - //#define Rtl819XFwBootArray Rtl8192UsbFwBootArray - //#define Rtl819XFwMainArray Rtl8192UsbFwMainArray - //#define Rtl819XFwDataArray Rtl8192UsbFwDataArray - #define Rtl819XMACPHY_Array_PG Rtl8192UsbMACPHY_Array_PG #define Rtl819XMACPHY_Array Rtl8192UsbMACPHY_Array #define Rtl819XPHY_REGArray Rtl8192UsbPHY_REGArray #define Rtl819XPHY_REG_1T2RArray Rtl8192UsbPHY_REG_1T2RArray - //#define Rtl819XRadioA_Array Rtl8192UsbRadioA_Array - //#define Rtl819XRadioB_Array Rtl8192UsbRadioB_Array #define Rtl819XRadioC_Array Rtl8192UsbRadioC_Array #define Rtl819XRadioD_Array Rtl8192UsbRadioD_Array - //2008.11.06 Add. #define Rtl819XFwImageArray Rtl8192SUFwImgArray #define Rtl819XMAC_Array Rtl8192SUMAC_2T_Array #define Rtl819XAGCTAB_Array Rtl8192SUAGCTAB_Array @@ -212,8 +197,6 @@ do { if(rt_global_debug_component & component) \ #define Rtl819XRadioB_GM_Array Rtl8192SURadioB_GM_Array #define Rtl819XRadioA_to1T_Array Rtl8192SURadioA_to1T_Array #define Rtl819XRadioA_to2T_Array Rtl8192SURadioA_to2T_Array -//#endif - // // Queue Select Value in TxDesc // @@ -256,7 +239,6 @@ do { if(rt_global_debug_component & component) \ #define DESC90_RATEMCS15 0x0f #define DESC90_RATEMCS32 0x20 -//#ifdef RTL8192SU // CCK Rates, TxHT = 0 #define DESC92S_RATE1M 0x00 #define DESC92S_RATE2M 0x01 @@ -292,13 +274,12 @@ do { if(rt_global_debug_component & component) \ #define DESC92S_RATEMCS15 0x1b #define DESC92S_RATEMCS15_SG 0x1c #define DESC92S_RATEMCS32 0x20 -//#endif #define RTL819X_DEFAULT_RF_TYPE RF_1T2R #define IEEE80211_WATCH_DOG_TIME 2000 #define PHY_Beacon_RSSI_SLID_WIN_MAX 10 -//for txpowertracking by amy +//for txpowertracking #define OFDM_Table_Length 19 #define CCK_Table_length 12 @@ -522,7 +503,6 @@ typedef struct rtl8192_rx_info { u8 out_pipe; }rtl8192_rx_info ; -//typedef struct _RX_DESC_STATUS_8192SU{ typedef struct rx_desc_819x_usb{ //DWORD 0 u16 Length:14; @@ -582,14 +562,12 @@ typedef struct rx_desc_819x_usb{ //DWORD 5 u32 TSFL; -//}RX_DESC_STATUS_8192SU, *PRX_DESC_STATUS_8192SU; }rx_desc_819x_usb, *prx_desc_819x_usb; // // Driver info are written to the begining of the RxBuffer // -//typedef struct _RX_DRIVER_INFO_8192S{ typedef struct rx_drvinfo_819x_usb{ // // Driver info contain PHY status and other variabel size info @@ -597,62 +575,27 @@ typedef struct rx_drvinfo_819x_usb{ // //DWORD 0 - /*u4Byte gain_0:7; - u4Byte trsw_0:1; - u4Byte gain_1:7; - u4Byte trsw_1:1; - u4Byte gain_2:7; - u4Byte trsw_2:1; - u4Byte gain_3:7; - u4Byte trsw_3:1; */ u8 gain_trsw[4]; //DWORD 1 - /*u4Byte pwdb_all:8; - u4Byte cfosho_0:8; - u4Byte cfosho_1:8; - u4Byte cfosho_2:8;*/ u8 pwdb_all; u8 cfosho[4]; //DWORD 2 - /*u4Byte cfosho_3:8; - u4Byte cfotail_0:8; - u4Byte cfotail_1:8; - u4Byte cfotail_2:8;*/ u8 cfotail[4]; //DWORD 3 - /*u4Byte cfotail_3:8; - u4Byte rxevm_0:8; - u4Byte rxevm_1:8; - u4Byte rxsnr_0:8;*/ char rxevm[2]; char rxsnr[4]; //DWORD 4 - /*u4Byte rxsnr_1:8; - u4Byte rxsnr_2:8; - u4Byte rxsnr_3:8; - u4Byte pdsnr_0:8;*/ u8 pdsnr[2]; //DWORD 5 - /*u4Byte pdsnr_1:8; - u4Byte csi_current_0:8; - u4Byte csi_current_1:8; - u4Byte csi_target_0:8;*/ u8 csi_current[2]; u8 csi_target[2]; //DWORD 6 - /*u4Byte csi_target_1:8; - u4Byte sigevm:8; - u4Byte max_ex_pwr:8; - u4Byte ex_intf_flag:1; - u4Byte sgi_en:1; - u4Byte rxsc:2; - u4Byte reserve:4;*/ u8 sigevm; u8 max_ex_pwr; u8 ex_intf_flag:1; @@ -669,10 +612,8 @@ typedef struct rx_drvinfo_819x_usb{ #define MAX_DEV_ADDR_SIZE 8 /* support till 64 bit bus width OS */ #define MAX_FIRMWARE_INFORMATION_SIZE 32 /*2006/04/30 by Emily forRTL8190*/ -//#define MAX_802_11_HEADER_LENGTH (40 + MAX_FIRMWARE_INFORMATION_SIZE) #define ENCRYPTION_MAX_OVERHEAD 128 #define USB_HWDESC_HEADER_LEN sizeof(tx_desc_819x_usb) -//#define TX_PACKET_SHIFT_BYTES (USB_HWDESC_HEADER_LEN + sizeof(tx_fwinfo_819x_usb)) #define MAX_FRAGMENT_COUNT 8 #ifdef RTL8192U #define MAX_TRANSMIT_BUFFER_SIZE 8000 @@ -780,10 +721,6 @@ typedef struct rtl_reg_debug{ typedef struct _rt_9x_tx_rate_history { u32 cck[4]; u32 ofdm[8]; - // HT_MCS[0][]: BW=0 SG=0 - // HT_MCS[1][]: BW=1 SG=0 - // HT_MCS[2][]: BW=0 SG=1 - // HT_MCS[3][]: BW=1 SG=1 u32 ht_mcs[4][16]; }rt_tx_rahis_t, *prt_tx_rahis_t; typedef struct _RT_SMOOTH_DATA_4RF { @@ -798,11 +735,6 @@ typedef struct _RT_SMOOTH_DATA_4RF { typedef struct Stats { unsigned long txrdu; -// unsigned long rxrdu; - //unsigned long rxnolast; - //unsigned long rxnodata; -// unsigned long rxreset; -// unsigned long rxnopointer; unsigned long rxok; unsigned long rxframgment; unsigned long rxcmdpkt[4]; //08/05/08 amy rx cmd element txfeedback/bcn report/cfg set/query @@ -822,18 +754,8 @@ typedef struct Stats unsigned long txnperr; unsigned long txnpdrop; unsigned long txresumed; -// unsigned long rxerr; -// unsigned long rxoverflow; -// unsigned long rxint; unsigned long txnpokint; -// unsigned long txhpokint; -// unsigned long txhperr; -// unsigned long ints; -// unsigned long shints; unsigned long txoverflow; -// unsigned long rxdmafail; -// unsigned long txbeacon; -// unsigned long txbeaconerr; unsigned long txlpokint; unsigned long txlpdrop; unsigned long txlperr; @@ -899,14 +821,11 @@ typedef struct Stats u32 CurrentShowTxate; } Stats; - // Bandwidth Offset #define HAL_PRIME_CHNL_OFFSET_DONT_CARE 0 #define HAL_PRIME_CHNL_OFFSET_LOWER 1 #define HAL_PRIME_CHNL_OFFSET_UPPER 2 -//+by amy 080507 - typedef struct ChnlAccessSetting { u16 SIFS_Timer; u16 DIFS_Timer; @@ -946,14 +865,12 @@ typedef enum _RT_RF_TYPE_819xU{ RF_PSEUDO_11N = 5, }RT_RF_TYPE_819xU, *PRT_RF_TYPE_819xU; -//#ifdef RTL8192SU typedef enum _RF_POWER_STATE{ RF_ON, RF_SLEEP, RF_OFF, RF_SHUT_DOWN, }RF_POWER_STATE, *PRF_POWER_STATE; -//#endif typedef struct _rate_adaptive { @@ -1004,7 +921,6 @@ typedef struct _init_gain u8 cca; } init_gain, *pinit_gain; -//by amy 0606 typedef struct _phy_ofdm_rx_status_report_819xusb { @@ -1083,8 +999,6 @@ typedef enum{ NIC_8192SU = 5, } nic_t; -//definded by WB. Ready to fill handlers for different NIC types. -//add handle here when necessary. struct rtl819x_ops{ nic_t nic_type; void (* rtl819x_read_eeprom_info)(struct net_device *dev); @@ -1121,55 +1035,31 @@ typedef struct r8192_priv short card_8192; /* O: rtl8192, 1:rtl8185 V B/C, 2:rtl8185 V D */ u8 card_8192_version; /* if TCR reports card V B/C this discriminates */ -// short phy_ver; /* meaningful for rtl8225 1:A 2:B 3:C */ short enable_gpio0; enum card_type {PCI,MINIPCI,CARDBUS,USB}card_type; short hw_plcp_len; short plcp_preamble_mode; spinlock_t irq_lock; -// spinlock_t irq_th_lock; spinlock_t tx_lock; spinlock_t ps_lock; struct mutex mutex; spinlock_t rf_lock; //used to lock rf write operation added by wb u16 irq_mask; -// short irq_enabled; -// struct net_device *dev; //comment this out. short chan; short sens; short max_sens; - - // u8 chtxpwr[15]; //channels from 1 to 14, 0 not used -// u8 chtxpwr_ofdm[15]; //channels from 1 to 14, 0 not used -// u8 cck_txpwr_base; -// u8 ofdm_txpwr_base; -// u8 challow[15]; //channels from 1 to 14, 0 not used short up; short crcmon; //if 1 allow bad crc frame reception in monitor mode -// short prism_hdr; - -// struct timer_list scan_timer; - /*short scanpending; - short stopscan;*/ -// spinlock_t scan_lock; -// u8 active_probe; - //u8 active_scan_num; + struct semaphore wx_sem; struct semaphore rf_sem; //used to lock rf write operation added by wb, modified by david -// short hw_wep; -// short digphy; -// short antb; -// short diversity; -// u8 cs_treshold; -// short rcr_csense; u8 rf_type; //0 means 1T2R, 1 means 2T4R RT_RF_TYPE_819xU rf_chip; -// u32 key0[4]; short (*rf_set_sens)(struct net_device *dev,short sens); u8 (*rf_set_chan)(struct net_device *dev,u8 ch); void (*rf_close)(struct net_device *dev); @@ -1182,13 +1072,10 @@ typedef struct r8192_priv struct proc_dir_entry *dir_dev; /*RX stuff*/ -// u32 *rxring; -// u32 *rxringtail; -// dma_addr_t rxringdma; struct urb **rx_urb; struct urb **rx_cmd_urb; -/* modified by davad for Rx process */ +/* for Rx process */ struct sk_buff_head rx_queue; struct sk_buff_head skb_queue; @@ -1248,7 +1135,6 @@ typedef struct r8192_priv u8 EEPROMTxPowerLevelOFDM24G[3]; // OFDM 2.4G channel 1~14 u8 EEPROMTxPowerLevelOFDM5G[24]; // OFDM 5G -//RTL8192SU bool bDmDisableProtect; bool bIgnoreDiffRateTxPowerOffset; @@ -1291,7 +1177,7 @@ typedef struct r8192_priv u8 RfTxPwrLevelCck[2][14]; u8 RfTxPwrLevelOfdm1T[2][14]; u8 RfTxPwrLevelOfdm2T[2][14]; - // 2009/01/20 MH Add for new EEPROM format. + // new EEPROM format. u8 TxPwrHt20Diff[2][14]; // HT 20<->40 Pwr diff u8 TxPwrLegacyHtDiff[2][14]; // For HT<->legacy pwr diff u8 TxPwrbandEdgeHt40[2][2]; // Band edge for HY 40MHZlow/up channel @@ -1303,7 +1189,6 @@ typedef struct r8192_priv u8 MidHighPwrTHR_L1; u8 MidHighPwrTHR_L2; u8 TxPwrSafetyFlag; // for Tx power safety spec -//RTL8192SU /*PHY related*/ BB_REGISTER_DEFINITION_T PHYRegDef[4]; //Radio A/B/C/D @@ -1335,19 +1220,15 @@ typedef struct r8192_priv // 8190 40MHz mode // u8 nCur40MhzPrimeSC; // Control channel sub-carrier - // Joseph test for shorten RF configuration time. - // We save RF reg0 in this variable to reduce RF reading. - // + u32 RfReg0Value[4]; u8 NumTotalRFPath; bool brfpath_rxenable[4]; //RF set related bool SetRFPowerStateInProgress; -//+by amy 080507 + struct timer_list watch_dog_timer; -//+by amy 080515 for dynamic mechenism - //Add by amy Tx Power Control for Near/Far Range 2008/05/15 bool bdynamic_txpower; //bDynamicTxPower bool bDynamicTxHighPower; // Tx high power state bool bDynamicTxLowPower; // Tx low power state @@ -1356,17 +1237,16 @@ typedef struct r8192_priv bool bstore_last_dtpflag; bool bstart_txctrl_bydtp; //Define to discriminate on High power State or on sitesuvey to change Tx gain index - //Add by amy for Rate Adaptive + rate_adaptive rate_adaptive; - //Add by amy for TX power tracking - //2008/05/15 Mars OPEN/CLOSE TX POWER TRACKING + // TX power tracking txbbgain_struct txbbgain_table[TxBBGainTableLength]; u8 EEPROMTxPowerTrackEnable; u8 txpower_count;//For 6 sec do tracking again bool btxpower_trackingInit; u8 OFDM_index; u8 CCK_index; - //2007/09/10 Mars Add CCK TX Power Tracking + // CCK TX Power Tracking ccktxbbgain_struct cck_txbbgain_table[CCKTxBBGainTableLength]; ccktxbbgain_struct cck_txbbgain_ch14_table[CCKTxBBGainTableLength]; u8 rfa_txpowertrackingindex; @@ -1386,7 +1266,7 @@ typedef struct r8192_priv //For Backup Initial Gain init_gain initgain_backup; u8 DefaultInitialGain[4]; - // For EDCA Turbo mode, Added by amy 080515. + // For EDCA Turbo mode bool bis_any_nonbepkts; bool bcurrent_turbo_EDCA; bool bis_cur_rdlstate; @@ -1400,17 +1280,16 @@ typedef struct r8192_priv u8 framesync; u32 framesyncC34; u8 framesyncMonitor; - //Added by amy 080516 for RX related + // RX related u16 nrxAMPDU_size; u8 nrxAMPDU_aggr_num; - //by amy for gpio + // gpio bool bHwRadioOff; - //by amy for reset_count u32 reset_count; bool bpbc_pressed; - //by amy for debug + // debug u32 txpower_checkcnt; u32 txpower_tracking_callback_cnt; u8 thermal_read_val[40]; @@ -1419,7 +1298,7 @@ typedef struct r8192_priv u32 ccktxpower_adjustcnt_ch14; u8 tx_fwinfo_force_subcarriermode; u8 tx_fwinfo_force_subcarrierval; - //by amy for silent reset + // silent reset RESET_TYPE ResetProgress; bool bForcedSilentReset; bool bDisableNormalResetCheck; @@ -1432,7 +1311,6 @@ typedef struct r8192_priv u16 SifsTime; - //define work item by amy 080526 struct delayed_work update_beacon_wq; struct delayed_work watch_dog_wq; struct delayed_work txpower_tracking_wq; @@ -1441,8 +1319,7 @@ typedef struct r8192_priv struct delayed_work initialgain_operate_wq; struct workqueue_struct *priv_wq; -//#ifdef RTL8192SU - //lzm add for 8192S + u32 IntrMask; // RF and BB access related synchronization flags. bool bChangeBBInProgress; // BaseBand RW is still in progress. @@ -1457,7 +1334,6 @@ typedef struct r8192_priv u8 ThermalReadBackIndex; //debug only u8 ThermalReadVal[40]; //debug only - // For HCT test, 2005.07.15, by rcnjko. // not realize true, just define it, set it 0 default, because some func use it bool bInHctTest; @@ -1474,7 +1350,6 @@ typedef struct r8192_priv char RF_C_TxPwDiff; // Antenna gain offset, rf-c to rf-a bool bRFSiOrPi;//0=si, 1=pi. - //lzm add for 8192S bool SetFwCmdInProgress; //is set FW CMD in Progress? 92S only u8 CurrentFwCmdIO; @@ -1499,14 +1374,6 @@ typedef struct r8192_priv }r8192_priv; -// for rtl8187 -// now mirging to rtl8187B -/* -typedef enum{ - LOW_PRIORITY = 0x02, - NORM_PRIORITY - } priority_t; -*/ //for rtl8187B typedef enum{ BULK_PRIORITY = 0x01, @@ -1560,7 +1427,6 @@ void rtl8192_rx_enable(struct net_device *); void rtl8192_tx_enable(struct net_device *); void rtl8192_disassociate(struct net_device *dev); -//void fix_rx_fifo(struct net_device *dev); void rtl8185_set_rf_pins_enable(struct net_device *dev,u32 a); void rtl8192_set_anaparam(struct net_device *dev,u32 a); @@ -1575,7 +1441,6 @@ void write_phy_cck(struct net_device *dev, u8 adr, u32 data); void write_phy_ofdm(struct net_device *dev, u8 adr, u32 data); void rtl8185_tx_antenna(struct net_device *dev, u8 ant); void rtl8192_set_rxconf(struct net_device *dev); -//short check_nic_enough_desc(struct net_device *dev, priority_t priority); extern void rtl819xusb_beacon_tx(struct net_device *dev,u16 tx_rate); void CamResetAllEntry(struct net_device* dev); void EnableHWSecurityConfig8192(struct net_device *dev); -- 1.7.1