From akropel1@rochester.rr.com Mon Jul 30 12:33:43 2007 From: Adam Kropelin Date: Sun, 29 Jul 2007 11:03:29 -0400 Subject: usb-serial: Fix edgeport regression on non-EPiC devices To: Greg Kroah-Hartman Cc: Nick Pasich , Andrew Morton , Al Borchers , Peter Berger Message-ID: <20070729150329.GA14873@mail.kroptech.com> Content-Disposition: inline Fix serious regression on non-EPiC edgeport usb-serial devices. Baud rate and MCR/LCR registers are not being written on these models due to apparent copy-n-paste errors introduced with EPiC support. Failure reported by Nick Pasich . Signed-off-by: Adam Kropelin Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/io_edgeport.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -2366,9 +2366,8 @@ static int send_cmd_write_baud_rate (str int status; unsigned char number = edge_port->port->number - edge_port->port->serial->minor; - if ((!edge_serial->is_epic) || - ((edge_serial->is_epic) && - (!edge_serial->epic_descriptor.Supports.IOSPSetBaudRate))) { + if (edge_serial->is_epic && + !edge_serial->epic_descriptor.Supports.IOSPSetBaudRate) { dbg("SendCmdWriteBaudRate - NOT Setting baud rate for port = %d, baud = %d", edge_port->port->number, baudRate); return 0; @@ -2461,18 +2460,16 @@ static int send_cmd_write_uart_register dbg("%s - write to %s register 0x%02x", (regNum == MCR) ? "MCR" : "LCR", __FUNCTION__, regValue); - if ((!edge_serial->is_epic) || - ((edge_serial->is_epic) && - (!edge_serial->epic_descriptor.Supports.IOSPWriteMCR) && - (regNum == MCR))) { + if (edge_serial->is_epic && + !edge_serial->epic_descriptor.Supports.IOSPWriteMCR && + regNum == MCR) { dbg("SendCmdWriteUartReg - Not writing to MCR Register"); return 0; } - if ((!edge_serial->is_epic) || - ((edge_serial->is_epic) && - (!edge_serial->epic_descriptor.Supports.IOSPWriteLCR) && - (regNum == LCR))) { + if (edge_serial->is_epic && + !edge_serial->epic_descriptor.Supports.IOSPWriteLCR && + regNum == LCR) { dbg ("SendCmdWriteUartReg - Not writing to LCR Register"); return 0; }