From joe@perches.com Mon Dec 17 11:42:23 2007 From: Joe Perches Date: Mon, 17 Dec 2007 11:40:18 -0800 Subject: USB: Spelling fixes To: linux-kernel@vger.kernel.org Cc: Andrew Morton , David Brownell , Greg Kroah-Hartman , Li Yang , Oliver Neukum , Thomas Winischhofer , linux-usb@vger.kernel.org, linuxppc-dev@ozlabs.org Message-ID: <1197920439-5455-12-git-send-email-joe@perches.com> Message-ID: <5703e57f925f31fc0eb38873bd7f10fc44f99cb4.1197918893.git.joe@perches.com> Signed-off-by: Joe Perches Signed-off-by: Greg Kroah-Hartman --- drivers/usb/atm/ueagle-atm.c | 2 +- drivers/usb/class/cdc-acm.c | 2 +- drivers/usb/gadget/at91_udc.h | 2 +- drivers/usb/gadget/fsl_usb2_udc.c | 2 +- drivers/usb/gadget/omap_udc.c | 2 +- drivers/usb/host/ehci-fsl.c | 2 +- drivers/usb/host/ehci-sched.c | 2 +- drivers/usb/host/r8a66597.h | 2 +- drivers/usb/misc/sisusbvga/sisusb.c | 2 +- drivers/usb/misc/usbtest.c | 2 +- drivers/usb/serial/io_edgeport.c | 8 ++++---- drivers/usb/serial/mos7840.c | 8 ++++---- 12 files changed, 18 insertions(+), 18 deletions(-) --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -999,7 +999,7 @@ static void __uea_load_page_e4(struct ue bi.dwAddress = swab32(blockidx->PageAddress); uea_dbg(INS_TO_USBDEV(sc), - "sending block %u for DSP page %u size %u adress %x\n", + "sending block %u for DSP page %u size %u address %x\n", blockno, pageno, blocksize, le32_to_cpu(blockidx->PageAddress)); /* send block info through the IDMA pipe */ --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -915,7 +915,7 @@ next_desc: } if (data_interface_num != call_interface_num) - dev_dbg(&intf->dev,"Seperate call control interface. That is not fully supported.\n"); + dev_dbg(&intf->dev,"Separate call control interface. That is not fully supported.\n"); skip_normal_probe: --- a/drivers/usb/gadget/at91_udc.h +++ b/drivers/usb/gadget/at91_udc.h @@ -53,7 +53,7 @@ #define AT91_UDP_RXRSM (1 << 9) /* USB Resume Interrupt Status */ #define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status [AT91RM9200 only] */ #define AT91_UDP_SOFINT (1 << 11) /* Start of Frame Interrupt Status */ -#define AT91_UDP_ENDBUSRES (1 << 12) /* End of Bus Reset Interrpt Status */ +#define AT91_UDP_ENDBUSRES (1 << 12) /* End of Bus Reset Interrupt Status */ #define AT91_UDP_WAKEUP (1 << 13) /* USB Wakeup Interrupt Status [AT91RM9200 only] */ #define AT91_UDP_ICR 0x20 /* Interrupt Clear Register */ --- a/drivers/usb/gadget/fsl_usb2_udc.c +++ b/drivers/usb/gadget/fsl_usb2_udc.c @@ -1896,7 +1896,7 @@ static int fsl_proc_read(char *page, cha spin_lock_irqsave(&udc->lock, flags); - /* ------basic driver infomation ---- */ + /* ------basic driver information ---- */ t = scnprintf(next, size, DRIVER_DESC "\n" "%s version: %s\n" --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -1028,7 +1028,7 @@ omap_ep_queue(struct usb_ep *_ep, struct /* STATUS for zero length DATA stages is * always an IN ... even for IN transfers, - * a wierd case which seem to stall OMAP. + * a weird case which seem to stall OMAP. */ UDC_EP_NUM_REG = (UDC_EP_SEL|UDC_EP_DIR); UDC_CTRL_REG = UDC_CLR_EP; --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -25,7 +25,7 @@ #include "ehci-fsl.h" -/* FIXME: Power Managment is un-ported so temporarily disable it */ +/* FIXME: Power Management is un-ported so temporarily disable it */ #undef CONFIG_PM /* PCI-based HCs are common, but plenty of non-PCI HCs are used too */ --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -211,7 +211,7 @@ static inline void carryover_tt_bandwidt * low/fullspeed transfer can "carry over" from one uframe to the next, * since the TT just performs downstream transfers in sequence. * - * For example two seperate 100 usec transfers can start in the same uframe, + * For example two separate 100 usec transfers can start in the same uframe, * and the second one would "carry over" 75 usecs into the next uframe. */ static void --- a/drivers/usb/host/r8a66597.h +++ b/drivers/usb/host/r8a66597.h @@ -405,7 +405,7 @@ struct r8a66597_pipe_info { u16 pipenum; - u16 address; /* R8A66597 HCD usb addres */ + u16 address; /* R8A66597 HCD usb address */ u16 epnum; u16 maxpacket; u16 type; --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -323,7 +323,7 @@ sisusb_bulkin_msg(struct sisusb_usb_data usb_kill_urb(urb); retval = -ETIMEDOUT; } else { - /* URB completed within timout */ + /* URB completed within timeout */ retval = urb->status; readbytes = urb->actual_length; } --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -1312,7 +1312,7 @@ static int ctrl_out (struct usbtest_dev len += vary; /* [real world] the "zero bytes IN" case isn't really used. - * hardware can easily trip up in this wierd case, since its + * hardware can easily trip up in this weird case, since its * status stage is IN, not OUT like other ep0in transfers. */ if (len > length) --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -959,7 +959,7 @@ static int edge_open (struct usb_serial_ * * This function will block the close until one of the following: * 1. Response to our Chase comes from Edgeport - * 2. A timout of 10 seconds without activity has expired + * 2. A timeout of 10 seconds without activity has expired * (1K of Edgeport data @ 2400 baud ==> 4 sec to empty) * ************************************************************************/ @@ -999,7 +999,7 @@ static void block_until_chase_response(s return; } } else { - // Reset timout value back to 10 seconds + // Reset timeout value back to 10 seconds dbg("%s - Last %d, Current %d", __FUNCTION__, lastCredits, edge_port->txCredits); loop = 10; } @@ -1014,7 +1014,7 @@ static void block_until_chase_response(s * This function will block the close until one of the following: * 1. TX count are 0 * 2. The edgeport has stopped - * 3. A timout of 3 seconds without activity has expired + * 3. A timeout of 3 seconds without activity has expired * ************************************************************************/ static void block_until_tx_empty (struct edgeport_port *edge_port) @@ -1050,7 +1050,7 @@ static void block_until_tx_empty (struct return; } } else { - // Reset timout value back to seconds + // Reset timeout value back to seconds loop = 30; } } --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1133,7 +1133,7 @@ static int mos7840_chars_in_buffer(struc * This function will block the close until one of the following: * 1. TX count are 0 * 2. The mos7840 has stopped - * 3. A timout of 3 seconds without activity has expired + * 3. A timeout of 3 seconds without activity has expired * ************************************************************************/ static void mos7840_block_until_tx_empty(struct moschip_port *mos7840_port) @@ -1161,7 +1161,7 @@ static void mos7840_block_until_tx_empty dbg("%s - TIMEOUT", __FUNCTION__); return; } else { - /* Reset timout value back to seconds */ + /* Reset timeout value back to seconds */ wait = 30; } } @@ -1275,7 +1275,7 @@ static void mos7840_close(struct usb_ser * * This function will block the close until one of the following: * 1. Response to our Chase comes from mos7840 - * 2. A timout of 10 seconds without activity has expired + * 2. A timeout of 10 seconds without activity has expired * (1K of mos7840 data @ 2400 baud ==> 4 sec to empty) * ************************************************************************/ @@ -1304,7 +1304,7 @@ static void mos7840_block_until_chase_re dbg("%s - TIMEOUT", __FUNCTION__); return; } else { - /* Reset timout value back to seconds */ + /* Reset timeout value back to seconds */ wait = 10; } }