[ 164.377199] Skipping EDID probe due to cached edid [ 168.260505] ath: Set HW RX filter: 0x417 [ 168.390071] ath: Set channel: 2412 MHz [ 168.390085] ath: tx chmask: 3, rx chmask: 3 [ 168.390224] ath: (5745 MHz) -> (2412 MHz), conf_is_ht40: 0 [ 168.457080] ath: Set channel: 2417 MHz [ 168.457093] ath: tx chmask: 3, rx chmask: 3 [ 168.457216] ath: (2412 MHz) -> (2417 MHz), conf_is_ht40: 0 [ 168.524074] ath: Set channel: 2422 MHz [ 168.524088] ath: tx chmask: 3, rx chmask: 3 [ 168.524238] ath: (2417 MHz) -> (2422 MHz), conf_is_ht40: 0 [ 168.591070] ath: Set channel: 2427 MHz [ 168.591084] ath: tx chmask: 3, rx chmask: 3 [ 168.591207] ath: (2422 MHz) -> (2427 MHz), conf_is_ht40: 0 [ 168.658094] ath: Set channel: 2432 MHz [ 168.658108] ath: tx chmask: 3, rx chmask: 3 [ 168.658233] ath: (2427 MHz) -> (2432 MHz), conf_is_ht40: 0 [ 168.725151] ath: Set channel: 2437 MHz [ 168.725168] ath: tx chmask: 3, rx chmask: 3 [ 168.725294] ath: (2432 MHz) -> (2437 MHz), conf_is_ht40: 0 [ 168.792214] ath: Set channel: 2442 MHz [ 168.792233] ath: tx chmask: 3, rx chmask: 3 [ 168.792369] ath: (2437 MHz) -> (2442 MHz), conf_is_ht40: 0 [ 168.859203] ath: Set channel: 2447 MHz [ 168.859218] ath: tx chmask: 3, rx chmask: 3 [ 168.859342] ath: (2442 MHz) -> (2447 MHz), conf_is_ht40: 0 [ 168.926098] ath: Set channel: 2452 MHz [ 168.926113] ath: tx chmask: 3, rx chmask: 3 [ 168.926277] ath: (2447 MHz) -> (2452 MHz), conf_is_ht40: 0 [ 168.993182] ath: Set channel: 2457 MHz [ 168.993200] ath: tx chmask: 3, rx chmask: 3 [ 168.993333] ath: (2452 MHz) -> (2457 MHz), conf_is_ht40: 0 [ 169.060077] ath: Set channel: 2462 MHz [ 169.060091] ath: tx chmask: 3, rx chmask: 3 [ 169.060252] ath: (2457 MHz) -> (2462 MHz), conf_is_ht40: 0 [ 169.127065] ath: Set channel: 2467 MHz [ 169.127079] ath: tx chmask: 3, rx chmask: 3 [ 169.127225] ath: (2462 MHz) -> (2467 MHz), conf_is_ht40: 0 [ 169.259065] ath: Set channel: 5745 MHz [ 169.259082] ath: tx chmask: 3, rx chmask: 3 [ 169.259244] ath: (2467 MHz) -> (5745 MHz), conf_is_ht40: 1 [ 169.566112] ath: Set channel: 2472 MHz [ 169.566128] ath: tx chmask: 3, rx chmask: 3 [ 169.566261] ath: (5745 MHz) -> (2472 MHz), conf_is_ht40: 0 [ 169.698049] ath: Set channel: 2484 MHz [ 169.698067] ath: tx chmask: 3, rx chmask: 3 [ 169.698232] ath: (2472 MHz) -> (2484 MHz), conf_is_ht40: 0 [ 169.830214] ath: Set channel: 5180 MHz [ 169.830228] ath: tx chmask: 3, rx chmask: 3 [ 169.830352] ath: (2484 MHz) -> (5180 MHz), conf_is_ht40: 0 [ 169.962086] ath: Set channel: 5200 MHz [ 169.962100] ath: tx chmask: 3, rx chmask: 3 [ 169.962256] ath: (5180 MHz) -> (5200 MHz), conf_is_ht40: 0 [ 170.094085] ath: Set channel: 5220 MHz [ 170.094099] ath: tx chmask: 3, rx chmask: 3 [ 170.094257] ath: (5200 MHz) -> (5220 MHz), conf_is_ht40: 0 [ 170.226126] ath: Set channel: 5240 MHz [ 170.226168] ath: tx chmask: 3, rx chmask: 3 [ 170.226305] ath: (5220 MHz) -> (5240 MHz), conf_is_ht40: 0 [ 170.358118] ath: Set channel: 5260 MHz [ 170.358161] ath: tx chmask: 3, rx chmask: 3 [ 170.358297] ath: (5240 MHz) -> (5260 MHz), conf_is_ht40: 0 [ 170.490199] ath: Set channel: 5745 MHz [ 170.490213] ath: tx chmask: 3, rx chmask: 3 [ 170.490335] ath: (5260 MHz) -> (5745 MHz), conf_is_ht40: 1 [ 170.797121] ath: Set channel: 5280 MHz [ 170.797174] ath: tx chmask: 3, rx chmask: 3 [ 170.797299] ath: (5745 MHz) -> (5280 MHz), conf_is_ht40: 0 [ 170.929117] ath: Set channel: 5300 MHz [ 170.929160] ath: tx chmask: 3, rx chmask: 3 [ 170.929295] ath: (5280 MHz) -> (5300 MHz), conf_is_ht40: 0 [ 171.061080] ath: Set channel: 5320 MHz [ 171.061097] ath: tx chmask: 3, rx chmask: 3 [ 171.061263] ath: (5300 MHz) -> (5320 MHz), conf_is_ht40: 0 [ 171.087760] wlan0: disassociating from 68:7f:74:3b:b1:10 by local choice (reason=3) [ 171.087846] ath: Configure tx [queue/halq] [0/3], aifs: 2, cw_min: 3, cw_max: 7, txop: 47 [ 171.087870] ath: Configure tx [queue/halq] [1/2], aifs: 2, cw_min: 7, cw_max: 15, txop: 94 [ 171.087887] ath: Configure tx [queue/halq] [2/1], aifs: 3, cw_min: 15, cw_max: 1023, txop: 0 [ 171.087903] ath: Configure tx [queue/halq] [3/0], aifs: 7, cw_min: 15, cw_max: 1023, txop: 0 [ 171.087924] ath: BSSID: 00:00:00:00:00:00 aid: 0x0 [ 171.087942] ath: BSS Changed PREAMBLE 0 [ 171.087949] ath: BSS Changed CTS PROT 0 [ 171.087957] ath: BSS Changed ASSOC 0 [ 171.087964] ath: Bss Info DISASSOC [ 171.087994] ath: Set HW Key [ 171.088169] ath: Set HW Key [ 171.092084] phy0: Removed STA 68:7f:74:3b:b1:10 [ 171.092241] phy0: Destroyed STA 68:7f:74:3b:b1:10 [ 171.095675] cfg80211: Calling CRDA to update world regulatory domain [ 171.098266] wlan0: deauthenticating from 68:7f:74:3b:b1:10 by local choice (reason=3) [ 171.158958] ath: Set HW RX filter: 0x17 [ 171.162181] ath: Set HW RX filter: 0x17 [ 171.166214] ath: Set HW RX filter: 0x207 [ 171.166229] phy0: device now idle [ 171.166247] ath: Detach Interface [ 171.166739] ath: Driver halt [ 182.338283] PM: Syncing filesystems ... done. [ 182.340336] PM: Preparing system for mem sleep [ 182.340348] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 182.341719] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 182.341829] PM: Entering mem sleep [ 182.341861] Suspending console(s) (use no_console_suspend to debug) [ 182.350222] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 182.353359] sd 0:0:0:0: [sda] Stopping disk [ 182.615653] ath9k 0000:01:00.0: PCI INT A disabled [ 182.615798] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 182.615814] uhci_hcd 0000:00:1d.3: PCI INT D disabled [ 182.615843] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 182.615872] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 182.615883] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 182.615940] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 182.686086] PM: suspend of devices complete after 343.958 msecs [ 182.697499] PM: late suspend of devices complete after 11.392 msecs [ 182.697628] ACPI: Preparing to enter system sleep state S3 [ 182.699110] Disabling non-boot CPUs ... [ 182.713427] CPU 1 is now offline [ 182.713436] SMP alternatives: switching to UP code [ 182.721712] TSC at resume: 504497420 [ 182.721712] Back to C! [ 182.721712] CPU0: Thermal monitoring handled by SMI [ 182.721712] Enabling non-boot CPUs ... [ 182.722182] SMP alternatives: switching to SMP code [ 182.726505] Booting processor 1 APIC 0x1 ip 0x6000 [ 182.721646] Initializing CPU#1 [ 182.721646] CPU: L1 I cache: 32K, L1 D cache: 24K [ 182.721646] CPU: L2 cache: 512K [ 182.721646] CPU: Physical Processor ID: 0 [ 182.721646] CPU: Processor Core ID: 0 [ 182.721646] CPU1: Thermal monitoring handled by SMI [ 182.797098] CPU1: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a [ 182.805166] CPU1 is up [ 182.805291] ACPI: Waking up from system sleep state S3 [ 183.074834] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 183.074958] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [ 183.075051] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff) [ 183.075081] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x50f15001) [ 183.075100] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0x51f05100) [ 183.075119] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x20001010) [ 183.075140] pcieport 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x10100) [ 183.075168] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 183.075275] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 183.075341] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 183.075407] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 183.075472] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 183.075541] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0x52204400) [ 183.075564] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [ 183.075617] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x0, writing 0xff) [ 183.075763] ahci 0000:00:1f.2: restoring config space at offset 0x9 (was 0x52200000, writing 0x52204000) [ 183.075796] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 183.075926] ath9k 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 183.075972] ath9k 0000:01:00.0: restoring config space at offset 0x4 (was 0x4, writing 0x51000004) [ 183.075991] ath9k 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 183.076036] ath9k 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 183.076446] PM: early resume of devices complete after 1.792 msecs [ 183.076816] i915 0000:00:02.0: setting latency timer to 64 [ 183.077338] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 183.077360] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 183.077444] HDA Intel 0000:00:1b.0: irq 27 for MSI/MSI-X [ 183.077543] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 183.077563] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 183.077603] usb usb2: root hub lost power or was reset [ 183.077652] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 183.077660] [drm] Big FIFO is enabled [ 183.077670] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 183.077708] usb usb3: root hub lost power or was reset [ 183.077721] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 183.077740] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 183.077753] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 183.077773] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 183.077782] usb usb4: root hub lost power or was reset [ 183.077811] usb usb5: root hub lost power or was reset [ 183.077825] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 183.077844] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 183.077914] pci 0000:00:1e.0: setting latency timer to 64 [ 183.077981] ahci 0000:00:1f.2: setting latency timer to 64 [ 183.078253] sd 0:0:0:0: [sda] Starting disk [ 183.078310] ath9k 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 183.143060] [drm] Big FIFO is enabled [ 183.143081] [drm] Big FIFO is enabled [ 183.143246] [drm] Big FIFO is enabled [ 183.229095] tpm_tis tpm_tis: TPM resume returned 0x26000000 (may be byte swapped) [ 183.311078] PM: resume of drv:usb dev:usb1 complete after 233.011 msecs [ 183.311121] PM: resume of drv:hub dev:1-0:1.0 complete after 233.040 msecs [ 183.311134] PM: resume of drv:usb dev:1-2 complete after 232.857 msecs [ 183.311179] PM: resume of drv:QCUSBNet2k dev:1-2:1.0 complete after 232.887 msecs [ 183.311193] PM: resume of drv:usb dev:1-5 complete after 232.954 msecs [ 183.311206] PM: resume of drv:usb dev:1-2:1.3 complete after 232.853 msecs [ 183.311225] PM: resume of drv:usb dev:1-2:1.1 complete after 232.907 msecs [ 183.311239] PM: resume of drv:uvcvideo dev:1-5:1.0 complete after 232.989 msecs [ 183.311252] PM: resume of drv:qcserial dev:1-2:1.2 complete after 232.919 msecs [ 183.311274] PM: resume of drv:uvcvideo dev:1-5:1.1 complete after 233.028 msecs [ 183.383081] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 183.386889] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 183.388571] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 183.388730] ata1.00: configured for UDMA/133 [ 183.389095] PM: resume of drv:sd dev:0:0:0:0 complete after 310.937 msecs [ 183.389142] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 310.955 msecs [ 183.392775] ath: Set HW RX filter: 0x2207 [ 183.404221] PM: resume of devices complete after 327.702 msecs [ 183.404541] PM: Finishing wakeup. [ 183.404548] Restarting tasks ... done. [ 183.506189] usb 1-2: reset high speed USB device using ehci_hcd and address 8 [ 183.620644] usb 1-2: device firmware changed [ 183.620684] usb 1-2: USB disconnect, address 8 [ 183.620953] usb0: unregister 'QCUSBNet2k' usb-0000:00:1d.7-2, QCUSBNet Ethernet Device [ 183.629591] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0 [ 183.629681] qcserial 1-2:1.2: device disconnected [ 183.722104] usb 1-5: reset high speed USB device using ehci_hcd and address 3 [ 184.133095] usb 1-2: new high speed USB device using ehci_hcd and address 9 [ 184.249027] usb 1-2: config 1 has an invalid interface number: 1 but max is 0 [ 184.249041] usb 1-2: config 1 has no interface number 0 [ 184.250896] usb 1-2: New USB device found, idVendor=1410, idProduct=a014 [ 184.250909] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 184.250920] usb 1-2: Product: Gobi 2000 [ 184.250928] usb 1-2: Manufacturer: Qualcomm Incorporated [ 184.252353] usb 1-2: configuration #1 chosen from 1 choice [ 184.253925] qcserial 1-2:1.1: Qualcomm USB modem converter detected [ 184.254772] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB0 [ 184.349209] usb 5-2: reset full speed USB device using uhci_hcd and address 4 [ 184.476247] usb 5-2: device firmware changed [ 184.578115] usb 1-3: new high speed USB device using ehci_hcd and address 10 [ 184.705906] usb 1-3: New USB device found, idVendor=0bda, idProduct=0138 [ 184.705921] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 184.705932] usb 1-3: Product: USB2.0-CRW [ 184.705940] usb 1-3: Manufacturer: Generic [ 184.705948] usb 1-3: SerialNumber: 20090516388200000 [ 184.706402] usb 1-3: configuration #1 chosen from 1 choice [ 184.715105] usb-storage: This device (0bda,0138,3882 S 06 P 50) has an unneeded SubClass entry in unusual_devs.h (kernel 2.6.32.23+drm33.10) [ 184.715117] Please send a copy of this message to and [ 184.733454] scsi5 : SCSI emulation for USB Mass Storage devices [ 184.734759] usb-storage: device found at 10 [ 184.734767] usb-storage: waiting for device to settle before scanning [ 184.734970] usb 1-3: USB disconnect, address 10 [ 184.787061] Stop polling thread! [ 184.787132] Polling thread stopped! [ 184.892218] usb 5-2: USB disconnect, address 4 [ 185.127204] usb 5-2: new full speed USB device using uhci_hcd and address 5 [ 185.264239] usb 5-2: New USB device found, idVendor=0cf3, idProduct=3000 [ 185.264254] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 185.264547] usb 5-2: configuration #1 chosen from 1 choice [ 185.268492] usb 5-2: firmware: requesting ath3k-1.fw [ 185.704186] usb 5-2: USB disconnect, address 5 [ 187.160093] usb 5-2: new full speed USB device using uhci_hcd and address 6 [ 187.298247] usb 5-2: New USB device found, idVendor=0cf3, idProduct=3002 [ 187.298260] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 187.298553] usb 5-2: configuration #1 chosen from 1 choice [ 187.792322] usb 1-2: USB disconnect, address 9 [ 187.792712] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0 [ 187.792799] qcserial 1-2:1.1: device disconnected [ 188.104114] usb 1-2: new high speed USB device using ehci_hcd and address 12 [ 188.219897] usb 1-2: New USB device found, idVendor=1410, idProduct=a010 [ 188.219911] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 188.219922] usb 1-2: Product: Gobi 2000 [ 188.219930] usb 1-2: Manufacturer: Qualcomm Incorporated [ 188.220732] usb 1-2: configuration #1 chosen from 1 choice [ 188.224302] usb0: register 'QCUSBNet2k' at usb-0000:00:1d.7-2, QCUSBNet Ethernet Device, c6:a1:cb:90:5a:e8 [ 196.738762] creating qcqmi0 [ 196.741720] qcserial 1-2:1.2: Qualcomm USB modem converter detected [ 196.742133] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB0 [ 197.241278] PM: Syncing filesystems ... done. [ 197.243645] PM: Preparing system for mem sleep [ 197.243654] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 197.244718] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 197.244790] PM: Entering mem sleep [ 197.244814] Suspending console(s) (use no_console_suspend to debug) [ 197.252222] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 197.255381] sd 0:0:0:0: [sda] Stopping disk [ 197.514661] ath9k 0000:01:00.0: PCI INT A disabled [ 197.514772] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 197.514800] uhci_hcd 0000:00:1d.3: PCI INT D disabled [ 197.514809] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 197.514824] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 197.514835] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 197.514890] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 197.547201] PM: suspend of devices complete after 302.224 msecs [ 197.558523] PM: late suspend of devices complete after 11.302 msecs [ 197.558641] ACPI: Preparing to enter system sleep state S3 [ 197.560093] Disabling non-boot CPUs ... [ 197.574573] CPU 1 is now offline [ 197.574581] SMP alternatives: switching to UP code [ 197.582808] TSC at resume: 504979910 [ 197.582808] Back to C! [ 197.582808] CPU0: Thermal monitoring handled by SMI [ 197.582808] Enabling non-boot CPUs ... [ 197.583275] SMP alternatives: switching to SMP code [ 197.587598] Booting processor 1 APIC 0x1 ip 0x6000 [ 197.582808] Initializing CPU#1 [ 197.582808] CPU: L1 I cache: 32K, L1 D cache: 24K [ 197.582808] CPU: L2 cache: 512K [ 197.582808] CPU: Physical Processor ID: 0 [ 197.582808] CPU: Processor Core ID: 0 [ 197.582808] CPU1: Thermal monitoring handled by SMI [ 197.658079] CPU1: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a [ 197.666165] CPU1 is up [ 197.666295] ACPI: Waking up from system sleep state S3 [ 197.935818] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 197.935942] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [ 197.936005] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff) [ 197.936063] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x50f15001) [ 197.936083] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0x51f05100) [ 197.936102] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x1010) [ 197.936121] pcieport 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x10100) [ 197.936150] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 197.936258] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 197.936324] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 197.936389] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 197.936454] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 197.936523] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0x52204400) [ 197.936546] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [ 197.936598] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x0, writing 0xff) [ 197.936745] ahci 0000:00:1f.2: restoring config space at offset 0x9 (was 0x52200000, writing 0x52204000) [ 197.936779] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 197.936910] ath9k 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 197.936956] ath9k 0000:01:00.0: restoring config space at offset 0x4 (was 0x4, writing 0x51000004) [ 197.936976] ath9k 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 197.936998] ath9k 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 197.937433] PM: early resume of devices complete after 1.795 msecs [ 197.937741] i915 0000:00:02.0: setting latency timer to 64 [ 197.938143] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 197.938164] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 197.938246] HDA Intel 0000:00:1b.0: irq 27 for MSI/MSI-X [ 197.938348] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 197.938369] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 197.938409] usb usb2: root hub lost power or was reset [ 197.938458] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 197.938478] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 197.938515] usb usb3: root hub lost power or was reset [ 197.938562] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 197.938570] [drm] Big FIFO is enabled [ 197.938580] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 197.938617] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 197.938627] usb usb4: root hub lost power or was reset [ 197.938636] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 197.938668] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 197.938678] usb usb5: root hub lost power or was reset [ 197.938687] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 197.938725] pci 0000:00:1e.0: setting latency timer to 64 [ 197.938774] ahci 0000:00:1f.2: setting latency timer to 64 [ 197.938787] ath9k 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 197.939225] sd 0:0:0:0: [sda] Starting disk [ 198.004235] [drm] Big FIFO is enabled [ 198.004256] [drm] Big FIFO is enabled [ 198.004371] [drm] Big FIFO is enabled [ 198.071086] PM: resume of drv:usb dev:usb4 complete after 132.081 msecs [ 198.071128] PM: resume of drv:hub dev:4-0:1.0 complete after 132.120 msecs [ 198.072098] PM: resume of drv:usb dev:usb3 complete after 133.119 msecs [ 198.072164] PM: resume of drv:hub dev:3-0:1.0 complete after 133.179 msecs [ 198.084117] tpm_tis tpm_tis: TPM resume returned 0x26000000 (may be byte swapped) [ 198.171081] PM: resume of drv:usb dev:usb1 complete after 232.125 msecs [ 198.171130] PM: resume of drv:hub dev:1-0:1.0 complete after 232.158 msecs [ 198.171143] PM: resume of drv:usb dev:1-2 complete after 231.127 msecs [ 198.171186] PM: resume of drv:QCUSBNet2k dev:1-2:1.0 complete after 231.018 msecs [ 198.171200] PM: resume of drv:usb dev:1-5 complete after 231.736 msecs [ 198.171214] PM: resume of drv:qcserial dev:1-2:1.2 complete after 230.867 msecs [ 198.171234] PM: resume of drv:usb dev:1-2:1.1 complete after 230.987 msecs [ 198.171248] PM: resume of drv:uvcvideo dev:1-5:1.0 complete after 231.696 msecs [ 198.171261] PM: resume of drv:usb dev:1-2:1.3 complete after 230.818 msecs [ 198.171280] PM: resume of drv:uvcvideo dev:1-5:1.1 complete after 231.640 msecs [ 198.175097] PM: resume of drv:usb dev:usb5 complete after 236.058 msecs [ 198.175150] PM: resume of drv:usb dev:5-2 complete after 235.415 msecs [ 198.175165] PM: resume of drv:hub dev:5-0:1.0 complete after 236.108 msecs [ 198.175190] PM: resume of drv:btusb dev:5-2:1.0 complete after 235.360 msecs [ 198.175204] PM: resume of drv:btusb dev:5-2:1.1 complete after 235.277 msecs [ 198.243092] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 198.246915] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 198.248618] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 198.248778] ata1.00: configured for UDMA/133 [ 198.249155] PM: resume of drv:sd dev:0:0:0:0 complete after 309.931 msecs [ 198.249208] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 309.834 msecs [ 198.249327] ath: Set HW RX filter: 0x2307 [ 198.261214] PM: resume of devices complete after 323.708 msecs [ 198.261545] PM: Finishing wakeup. [ 198.261552] Restarting tasks ... done. [ 198.363198] usb 1-2: reset high speed USB device using ehci_hcd and address 12 [ 198.477659] usb 1-2: device firmware changed [ 198.477712] usb 1-2: USB disconnect, address 12 [ 198.478133] usb0: unregister 'QCUSBNet2k' usb-0000:00:1d.7-2, QCUSBNet Ethernet Device [ 198.509708] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0 [ 198.509766] qcserial 1-2:1.2: device disconnected [ 198.579072] usb 1-5: reset high speed USB device using ehci_hcd and address 3 [ 198.989201] usb 1-2: new high speed USB device using ehci_hcd and address 13 [ 199.104913] usb 1-2: config 1 has an invalid interface number: 1 but max is 0 [ 199.104927] usb 1-2: config 1 has no interface number 0 [ 199.106786] usb 1-2: New USB device found, idVendor=1410, idProduct=a014 [ 199.106799] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 199.106810] usb 1-2: Product: Gobi 2000 [ 199.106818] usb 1-2: Manufacturer: Qualcomm Incorporated [ 199.107177] usb 1-2: configuration #1 chosen from 1 choice [ 199.109466] qcserial 1-2:1.1: Qualcomm USB modem converter detected [ 199.110517] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB0 [ 199.205198] usb 5-2: reset full speed USB device using uhci_hcd and address 6 [ 199.333147] usb 5-2: device firmware changed [ 199.435118] usb 1-3: new high speed USB device using ehci_hcd and address 14 [ 199.562796] usb 1-3: New USB device found, idVendor=0bda, idProduct=0138 [ 199.562811] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 199.562823] usb 1-3: Product: USB2.0-CRW [ 199.562831] usb 1-3: Manufacturer: Generic [ 199.562839] usb 1-3: SerialNumber: 20090516388200000 [ 199.563253] usb 1-3: configuration #1 chosen from 1 choice [ 199.569784] usb-storage: This device (0bda,0138,3882 S 06 P 50) has an unneeded SubClass entry in unusual_devs.h (kernel 2.6.32.23+drm33.10) [ 199.569796] Please send a copy of this message to and [ 199.595362] scsi6 : SCSI emulation for USB Mass Storage devices [ 199.596146] usb 5-2: USB disconnect, address 6 [ 199.602223] usb-storage: device found at 14 [ 199.602230] usb-storage: waiting for device to settle before scanning [ 199.699077] usb 5-2: new full speed USB device using uhci_hcd and address 7 [ 199.889134] usb 5-2: New USB device found, idVendor=0cf3, idProduct=3000 [ 199.889149] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 199.889487] usb 5-2: configuration #1 chosen from 1 choice [ 199.893451] usb 5-2: firmware: requesting ath3k-1.fw [ 200.155313] usb 1-3: USB disconnect, address 14 [ 200.211066] Stop polling thread! [ 200.211147] Polling thread stopped! [ 200.315208] usb 5-2: USB disconnect, address 7 [ 201.672090] usb 5-2: new full speed USB device using uhci_hcd and address 8 [ 201.813137] usb 5-2: New USB device found, idVendor=0cf3, idProduct=3002 [ 201.813151] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 201.813445] usb 5-2: configuration #1 chosen from 1 choice [ 202.962838] usb 1-2: USB disconnect, address 13 [ 202.963321] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0 [ 202.963418] qcserial 1-2:1.1: device disconnected [ 203.273102] usb 1-2: new high speed USB device using ehci_hcd and address 16 [ 203.388917] usb 1-2: New USB device found, idVendor=1410, idProduct=a010 [ 203.388931] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 203.388943] usb 1-2: Product: Gobi 2000 [ 203.388951] usb 1-2: Manufacturer: Qualcomm Incorporated [ 203.389365] usb 1-2: configuration #1 chosen from 1 choice [ 203.393007] usb0: register 'QCUSBNet2k' at usb-0000:00:1d.7-2, QCUSBNet Ethernet Device, c6:a1:cb:90:5a:e8 [ 205.210222] Skipping EDID probe due to cached edid [ 210.267081] ath: Starting driver with initial channel: 5745 MHz [ 210.394105] ath: timeout (100000 us) on reg 0x7000: 0xdeadbeef & 0x00000003 != 0x00000000 [ 212.008723] creating qcqmi0 [ 212.011589] qcserial 1-2:1.2: Qualcomm USB modem converter detected [ 212.012319] usb 1-2: Qualcomm USB modem converter now attached to ttyUSB0