Subject: [PATCH] [acpi driver model] Move the ASUS platform driver Signed-off-by: Patrick Mochel --- drivers/acpi/Makefile | 1 drivers/acpi/asus_acpi.c | 1238 ------------------------------- drivers/acpi/drivers/legacy/Makefile | 2 drivers/acpi/drivers/legacy/asus_acpi.c | 1238 +++++++++++++++++++++++++++++++ 4 files changed, 1240 insertions(+), 1239 deletions(-) delete mode 100644 drivers/acpi/asus_acpi.c create mode 100644 drivers/acpi/drivers/legacy/asus_acpi.c applies-to: 66c95489b0fef6946bf2f113d7def11279f4502d 51587a980c40990210a20f75890f1fa416f8d8d0 diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 46d8238..94574cd 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -36,7 +36,6 @@ obj-y += drivers/ obj-y += pci_root.o pci_link.o pci_irq.o pci_bind.o obj-$(CONFIG_ACPI_SYSTEM) += system.o event.o obj-$(CONFIG_ACPI_DEBUG) += debug.o -obj-$(CONFIG_ACPI_ASUS) += asus_acpi.o obj-$(CONFIG_ACPI_IBM) += ibm_acpi.o obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o obj-y += scan.o motherboard.o diff --git a/drivers/acpi/asus_acpi.c b/drivers/acpi/asus_acpi.c deleted file mode 100644 index fec895a..0000000 --- a/drivers/acpi/asus_acpi.c +++ /dev/null @@ -1,1238 +0,0 @@ -/* - * asus_acpi.c - Asus Laptop ACPI Extras - * - * - * Copyright (C) 2002, 2003, 2004 Julien Lerouge, Karol Kozimor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * - * The development page for this driver is located at - * http://sourceforge.net/projects/acpi4asus/ - * - * Credits: - * Pontus Fuchs - Helper functions, cleanup - * Johann Wiesner - Small compile fixes - * John Belmonte - ACPI code for Toshiba laptop was a good starting point. - * - * TODO: - * add Fn key status - * Add mode selection on module loading (parameter) -> still necessary? - * Complete display switching -- may require dirty hacks or calling _DOS? - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#define ASUS_ACPI_VERSION "0.29" - -#define PROC_ASUS "asus" //the directory -#define PROC_MLED "mled" -#define PROC_WLED "wled" -#define PROC_TLED "tled" -#define PROC_INFO "info" -#define PROC_LCD "lcd" -#define PROC_BRN "brn" -#define PROC_DISP "disp" - -#define ACPI_HOTK_NAME "Asus Laptop ACPI Extras Driver" -#define ACPI_HOTK_CLASS "hotkey" -#define ACPI_HOTK_DEVICE_NAME "Hotkey" -#define ACPI_HOTK_HID "ATK0100" - -/* - * Some events we use, same for all Asus - */ -#define BR_UP 0x10 -#define BR_DOWN 0x20 - -/* - * Flags for hotk status - */ -#define MLED_ON 0x01 //is MLED ON ? -#define WLED_ON 0x02 -#define TLED_ON 0x04 - -MODULE_AUTHOR("Julien Lerouge, Karol Kozimor"); -MODULE_DESCRIPTION(ACPI_HOTK_NAME); -MODULE_LICENSE("GPL"); - -static uid_t asus_uid; -static gid_t asus_gid; -module_param(asus_uid, uint, 0); -MODULE_PARM_DESC(uid, "UID for entries in /proc/acpi/asus.\n"); -module_param(asus_gid, uint, 0); -MODULE_PARM_DESC(gid, "GID for entries in /proc/acpi/asus.\n"); - -/* For each model, all features implemented, - * those marked with R are relative to HOTK, A for absolute */ -struct model_data { - char *name; //name of the laptop________________A - char *mt_mled; //method to handle mled_____________R - char *mled_status; //node to handle mled reading_______A - char *mt_wled; //method to handle wled_____________R - char *wled_status; //node to handle wled reading_______A - char *mt_tled; //method to handle tled_____________R - char *tled_status; //node to handle tled reading_______A - char *mt_lcd_switch; //method to turn LCD ON/OFF_________A - char *lcd_status; //node to read LCD panel state______A - char *brightness_up; //method to set brightness up_______A - char *brightness_down; //guess what ?______________________A - char *brightness_set; //method to set absolute brightness_R - char *brightness_get; //method to get absolute brightness_R - char *brightness_status; //node to get brightness____________A - char *display_set; //method to set video output________R - char *display_get; //method to get video output________R -}; - -/* - * This is the main structure, we can use it to store anything interesting - * about the hotk device - */ -struct asus_hotk { - struct acpi_device *device; //the device we are in - acpi_handle handle; //the handle of the hotk device - char status; //status of the hotk, for LEDs, ... - struct model_data *methods; //methods available on the laptop - u8 brightness; //brightness level - enum { - A1x = 0, //A1340D, A1300F - A2x, //A2500H - D1x, //D1 - L2D, //L2000D - L3C, //L3800C - L3D, //L3400D - L3H, //L3H, but also L2000E - L4R, //L4500R - L5x, //L5800C - L8L, //L8400L - M1A, //M1300A - M2E, //M2400E, L4400L - M6N, //M6800N - M6R, //M6700R - P30, //Samsung P30 - S1x, //S1300A, but also L1400B and M2400A (L84F) - S2x, //S200 (J1 reported), Victor MP-XP7210 - xxN, //M2400N, M3700N, M5200N, S1300N, S5200N, W1OOON - //(Centrino) - END_MODEL - } model; //Models currently supported - u16 event_count[128]; //count for each event TODO make this better -}; - -/* Here we go */ -#define A1x_PREFIX "\\_SB.PCI0.ISA.EC0." -#define L3C_PREFIX "\\_SB.PCI0.PX40.ECD0." -#define M1A_PREFIX "\\_SB.PCI0.PX40.EC0." -#define P30_PREFIX "\\_SB.PCI0.LPCB.EC0." -#define S1x_PREFIX "\\_SB.PCI0.PX40." -#define S2x_PREFIX A1x_PREFIX -#define xxN_PREFIX "\\_SB.PCI0.SBRG.EC0." - -static struct model_data model_conf[END_MODEL] = { - /* - * Those pathnames are relative to the HOTK / ATKD device : - * - mt_mled - * - mt_wled - * - brightness_set - * - brightness_get - * - display_set - * - display_get - * - * TODO I have seen a SWBX and AIBX method on some models, like L1400B, - * it seems to be a kind of switch, but what for ? - * - */ - - { - .name = "A1x", - .mt_mled = "MLED", - .mled_status = "\\MAIL", - .mt_lcd_switch = A1x_PREFIX "_Q10", - .lcd_status = "\\BKLI", - .brightness_up = A1x_PREFIX "_Q0E", - .brightness_down = A1x_PREFIX "_Q0F"}, - - { - .name = "A2x", - .mt_mled = "MLED", - .mt_wled = "WLED", - .wled_status = "\\SG66", - .mt_lcd_switch = "\\Q10", - .lcd_status = "\\BAOF", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "D1x", - .mt_mled = "MLED", - .mt_lcd_switch = "\\Q0D", - .lcd_status = "\\GP11", - .brightness_up = "\\Q0C", - .brightness_down = "\\Q0B", - .brightness_status = "\\BLVL", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "L2D", - .mt_mled = "MLED", - .mled_status = "\\SGP6", - .mt_wled = "WLED", - .wled_status = "\\RCP3", - .mt_lcd_switch = "\\Q10", - .lcd_status = "\\SGP0", - .brightness_up = "\\Q0E", - .brightness_down = "\\Q0F", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "L3C", - .mt_mled = "MLED", - .mt_wled = "WLED", - .mt_lcd_switch = L3C_PREFIX "_Q10", - .lcd_status = "\\GL32", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\_SB.PCI0.PCI1.VGAC.NMAP"}, - - { - .name = "L3D", - .mt_mled = "MLED", - .mled_status = "\\MALD", - .mt_wled = "WLED", - .mt_lcd_switch = "\\Q10", - .lcd_status = "\\BKLG", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "L3H", - .mt_mled = "MLED", - .mt_wled = "WLED", - .mt_lcd_switch = "EHK", - .lcd_status = "\\_SB.PCI0.PM.PBC", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "L4R", - .mt_mled = "MLED", - .mt_wled = "WLED", - .wled_status = "\\_SB.PCI0.SBRG.SG13", - .mt_lcd_switch = xxN_PREFIX "_Q10", - .lcd_status = "\\_SB.PCI0.SBSM.SEO4", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\_SB.PCI0.P0P1.VGA.GETD"}, - - { - .name = "L5x", - .mt_mled = "MLED", -/* WLED present, but not controlled by ACPI */ - .mt_tled = "TLED", - .mt_lcd_switch = "\\Q0D", - .lcd_status = "\\BAOF", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "L8L" -/* No features, but at least support the hotkeys */ - }, - - { - .name = "M1A", - .mt_mled = "MLED", - .mt_lcd_switch = M1A_PREFIX "Q10", - .lcd_status = "\\PNOF", - .brightness_up = M1A_PREFIX "Q0E", - .brightness_down = M1A_PREFIX "Q0F", - .brightness_status = "\\BRIT", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "M2E", - .mt_mled = "MLED", - .mt_wled = "WLED", - .mt_lcd_switch = "\\Q10", - .lcd_status = "\\GP06", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\INFB"}, - - { - .name = "M6N", - .mt_mled = "MLED", - .mt_wled = "WLED", - .wled_status = "\\_SB.PCI0.SBRG.SG13", - .mt_lcd_switch = xxN_PREFIX "_Q10", - .lcd_status = "\\_SB.BKLT", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\SSTE"}, - { - .name = "M6R", - .mt_mled = "MLED", - .mt_wled = "WLED", - .mt_lcd_switch = xxN_PREFIX "_Q10", - .lcd_status = "\\_SB.PCI0.SBSM.SEO4", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\SSTE"}, - - { - .name = "P30", - .mt_wled = "WLED", - .mt_lcd_switch = P30_PREFIX "_Q0E", - .lcd_status = "\\BKLT", - .brightness_up = P30_PREFIX "_Q68", - .brightness_down = P30_PREFIX "_Q69", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\DNXT"}, - - { - .name = "S1x", - .mt_mled = "MLED", - .mled_status = "\\EMLE", - .mt_wled = "WLED", - .mt_lcd_switch = S1x_PREFIX "Q10", - .lcd_status = "\\PNOF", - .brightness_set = "SPLV", - .brightness_get = "GPLV"}, - - { - .name = "S2x", - .mt_mled = "MLED", - .mled_status = "\\MAIL", - .mt_lcd_switch = S2x_PREFIX "_Q10", - .lcd_status = "\\BKLI", - .brightness_up = S2x_PREFIX "_Q0B", - .brightness_down = S2x_PREFIX "_Q0A"}, - - { - .name = "xxN", - .mt_mled = "MLED", -/* WLED present, but not controlled by ACPI */ - .mt_lcd_switch = xxN_PREFIX "_Q10", - .lcd_status = "\\BKLT", - .brightness_set = "SPLV", - .brightness_get = "GPLV", - .display_set = "SDSP", - .display_get = "\\ADVG"} -}; - -/* procdir we use */ -static struct proc_dir_entry *asus_proc_dir; - -/* - * This header is made available to allow proper configuration given model, - * revision number , ... this info cannot go in struct asus_hotk because it is - * available before the hotk - */ -static struct acpi_table_header *asus_info; - -/* The actual device the driver binds to */ -static struct asus_hotk *hotk; - -/* - * The hotkey driver declaration - */ -static int asus_hotk_add(struct acpi_device *device); -static int asus_hotk_remove(struct acpi_device *device, int type); -static struct acpi_driver asus_hotk_driver = { - .name = ACPI_HOTK_NAME, - .class = ACPI_HOTK_CLASS, - .ids = ACPI_HOTK_HID, - .ops = { - .add = asus_hotk_add, - .remove = asus_hotk_remove, - }, -}; - -/* - * This function evaluates an ACPI method, given an int as parameter, the - * method is searched within the scope of the handle, can be NULL. The output - * of the method is written is output, which can also be NULL - * - * returns 1 if write is successful, 0 else. - */ -static int write_acpi_int(acpi_handle handle, const char *method, int val, - struct acpi_buffer *output) -{ - struct acpi_object_list params; //list of input parameters (an int here) - union acpi_object in_obj; //the only param we use - acpi_status status; - - params.count = 1; - params.pointer = &in_obj; - in_obj.type = ACPI_TYPE_INTEGER; - in_obj.integer.value = val; - - status = acpi_evaluate_object(handle, (char *)method, ¶ms, output); - return (status == AE_OK); -} - -static int read_acpi_int(acpi_handle handle, const char *method, int *val) -{ - struct acpi_buffer output; - union acpi_object out_obj; - acpi_status status; - - output.length = sizeof(out_obj); - output.pointer = &out_obj; - - status = acpi_evaluate_object(handle, (char *)method, NULL, &output); - *val = out_obj.integer.value; - return (status == AE_OK) && (out_obj.type == ACPI_TYPE_INTEGER); -} - -/* - * We write our info in page, we begin at offset off and cannot write more - * than count bytes. We set eof to 1 if we handle those 2 values. We return the - * number of bytes written in page - */ -static int -proc_read_info(char *page, char **start, off_t off, int count, int *eof, - void *data) -{ - int len = 0; - int temp; - char buf[16]; //enough for all info - /* - * We use the easy way, we don't care of off and count, so we don't set eof - * to 1 - */ - - len += sprintf(page, ACPI_HOTK_NAME " " ASUS_ACPI_VERSION "\n"); - len += sprintf(page + len, "Model reference : %s\n", - hotk->methods->name); - /* - * The SFUN method probably allows the original driver to get the list - * of features supported by a given model. For now, 0x0100 or 0x0800 - * bit signifies that the laptop is equipped with a Wi-Fi MiniPCI card. - * The significance of others is yet to be found. - */ - if (read_acpi_int(hotk->handle, "SFUN", &temp)) - len += - sprintf(page + len, "SFUN value : 0x%04x\n", temp); - /* - * Another value for userspace: the ASYM method returns 0x02 for - * battery low and 0x04 for battery critical, its readings tend to be - * more accurate than those provided by _BST. - * Note: since not all the laptops provide this method, errors are - * silently ignored. - */ - if (read_acpi_int(hotk->handle, "ASYM", &temp)) - len += - sprintf(page + len, "ASYM value : 0x%04x\n", temp); - if (asus_info) { - snprintf(buf, 16, "%d", asus_info->length); - len += sprintf(page + len, "DSDT length : %s\n", buf); - snprintf(buf, 16, "%d", asus_info->checksum); - len += sprintf(page + len, "DSDT checksum : %s\n", buf); - snprintf(buf, 16, "%d", asus_info->revision); - len += sprintf(page + len, "DSDT revision : %s\n", buf); - snprintf(buf, 7, "%s", asus_info->oem_id); - len += sprintf(page + len, "OEM id : %s\n", buf); - snprintf(buf, 9, "%s", asus_info->oem_table_id); - len += sprintf(page + len, "OEM table id : %s\n", buf); - snprintf(buf, 16, "%x", asus_info->oem_revision); - len += sprintf(page + len, "OEM revision : 0x%s\n", buf); - snprintf(buf, 5, "%s", asus_info->asl_compiler_id); - len += sprintf(page + len, "ASL comp vendor id : %s\n", buf); - snprintf(buf, 16, "%x", asus_info->asl_compiler_revision); - len += sprintf(page + len, "ASL comp revision : 0x%s\n", buf); - } - - return len; -} - -/* - * /proc handlers - * We write our info in page, we begin at offset off and cannot write more - * than count bytes. We set eof to 1 if we handle those 2 values. We return the - * number of bytes written in page - */ - -/* Generic LED functions */ -static int read_led(const char *ledname, int ledmask) -{ - if (ledname) { - int led_status; - - if (read_acpi_int(NULL, ledname, &led_status)) - return led_status; - else - printk(KERN_WARNING "Asus ACPI: Error reading LED " - "status\n"); - } - return (hotk->status & ledmask) ? 1 : 0; -} - -static int parse_arg(const char __user * buf, unsigned long count, int *val) -{ - char s[32]; - if (!count) - return 0; - if (count > 31) - return -EINVAL; - if (copy_from_user(s, buf, count)) - return -EFAULT; - s[count] = 0; - if (sscanf(s, "%i", val) != 1) - return -EINVAL; - return count; -} - -/* FIXME: kill extraneous args so it can be called independently */ -static int -write_led(const char __user * buffer, unsigned long count, - char *ledname, int ledmask, int invert) -{ - int value; - int led_out = 0; - - count = parse_arg(buffer, count, &value); - if (count > 0) - led_out = value ? 1 : 0; - - hotk->status = - (led_out) ? (hotk->status | ledmask) : (hotk->status & ~ledmask); - - if (invert) /* invert target value */ - led_out = !led_out & 0x1; - - if (!write_acpi_int(hotk->handle, ledname, led_out, NULL)) - printk(KERN_WARNING "Asus ACPI: LED (%s) write failed\n", - ledname); - - return count; -} - -/* - * Proc handlers for MLED - */ -static int -proc_read_mled(char *page, char **start, off_t off, int count, int *eof, - void *data) -{ - return sprintf(page, "%d\n", - read_led(hotk->methods->mled_status, MLED_ON)); -} - -static int -proc_write_mled(struct file *file, const char __user * buffer, - unsigned long count, void *data) -{ - return write_led(buffer, count, hotk->methods->mt_mled, MLED_ON, 1); -} - -/* - * Proc handlers for WLED - */ -static int -proc_read_wled(char *page, char **start, off_t off, int count, int *eof, - void *data) -{ - return sprintf(page, "%d\n", - read_led(hotk->methods->wled_status, WLED_ON)); -} - -static int -proc_write_wled(struct file *file, const char __user * buffer, - unsigned long count, void *data) -{ - return write_led(buffer, count, hotk->methods->mt_wled, WLED_ON, 0); -} - -/* - * Proc handlers for TLED - */ -static int -proc_read_tled(char *page, char **start, off_t off, int count, int *eof, - void *data) -{ - return sprintf(page, "%d\n", - read_led(hotk->methods->tled_status, TLED_ON)); -} - -static int -proc_write_tled(struct file *file, const char __user * buffer, - unsigned long count, void *data) -{ - return write_led(buffer, count, hotk->methods->mt_tled, TLED_ON, 0); -} - -static int get_lcd_state(void) -{ - int lcd = 0; - - if (hotk->model != L3H) { - /* We don't have to check anything if we are here */ - if (!read_acpi_int(NULL, hotk->methods->lcd_status, &lcd)) - printk(KERN_WARNING - "Asus ACPI: Error reading LCD status\n"); - - if (hotk->model == L2D) - lcd = ~lcd; - } else { /* L3H and the like have to be handled differently */ - acpi_status status = 0; - struct acpi_object_list input; - union acpi_object mt_params[2]; - struct acpi_buffer output; - union acpi_object out_obj; - - input.count = 2; - input.pointer = mt_params; - /* Note: the following values are partly guessed up, but - otherwise they seem to work */ - mt_params[0].type = ACPI_TYPE_INTEGER; - mt_params[0].integer.value = 0x02; - mt_params[1].type = ACPI_TYPE_INTEGER; - mt_params[1].integer.value = 0x02; - - output.length = sizeof(out_obj); - output.pointer = &out_obj; - - status = - acpi_evaluate_object(NULL, hotk->methods->lcd_status, - &input, &output); - if (status != AE_OK) - return -1; - if (out_obj.type == ACPI_TYPE_INTEGER) - /* That's what the AML code does */ - lcd = out_obj.integer.value >> 8; - } - - return (lcd & 1); -} - -static int set_lcd_state(int value) -{ - int lcd = 0; - acpi_status status = 0; - - lcd = value ? 1 : 0; - if (lcd != get_lcd_state()) { - /* switch */ - if (hotk->model != L3H) { - status = - acpi_evaluate_object(NULL, - hotk->methods->mt_lcd_switch, - NULL, NULL); - } else { /* L3H and the like have to be handled differently */ - if (!write_acpi_int - (hotk->handle, hotk->methods->mt_lcd_switch, 0x07, - NULL)) - status = AE_ERROR; - /* L3H's AML executes EHK (0x07) upon Fn+F7 keypress, - the exact behaviour is simulated here */ - } - if (ACPI_FAILURE(status)) - printk(KERN_WARNING "Asus ACPI: Error switching LCD\n"); - } - return 0; - -} - -static int -proc_read_lcd(char *page, char **start, off_t off, int count, int *eof, - void *data) -{ - return sprintf(page, "%d\n", get_lcd_state()); -} - -static int -proc_write_lcd(struct file *file, const char __user * buffer, - unsigned long count, void *data) -{ - int value; - - count = parse_arg(buffer, count, &value); - if (count > 0) - set_lcd_state(value); - return count; -} - -static int read_brightness(void) -{ - int value; - - if (hotk->methods->brightness_get) { /* SPLV/GPLV laptop */ - if (!read_acpi_int(hotk->handle, hotk->methods->brightness_get, - &value)) - printk(KERN_WARNING - "Asus ACPI: Error reading brightness\n"); - } else if (hotk->methods->brightness_status) { /* For D1 for example */ - if (!read_acpi_int(NULL, hotk->methods->brightness_status, - &value)) - printk(KERN_WARNING - "Asus ACPI: Error reading brightness\n"); - } else /* No GPLV method */ - value = hotk->brightness; - return value; -} - -/* - * Change the brightness level - */ -static void set_brightness(int value) -{ - acpi_status status = 0; - - /* SPLV laptop */ - if (hotk->methods->brightness_set) { - if (!write_acpi_int(hotk->handle, hotk->methods->brightness_set, - value, NULL)) - printk(KERN_WARNING - "Asus ACPI: Error changing brightness\n"); - return; - } - - /* No SPLV method if we are here, act as appropriate */ - value -= read_brightness(); - while (value != 0) { - status = acpi_evaluate_object(NULL, (value > 0) ? - hotk->methods->brightness_up : - hotk->methods->brightness_down, - NULL, NULL); - (value > 0) ? value-- : value++; - if (ACPI_FAILURE(status)) - printk(KERN_WARNING - "Asus ACPI: Error changing brightness\n"); - } - return; -} - -static int -proc_read_brn(char *page, char **start, off_t off, int count, int *eof, - void *data) -{ - return sprintf(page, "%d\n", read_brightness()); -} - -static int -proc_write_brn(struct file *file, const char __user * buffer, - unsigned long count, void *data) -{ - int value; - - count = parse_arg(buffer, count, &value); - if (count > 0) { - value = (0 < value) ? ((15 < value) ? 15 : value) : 0; - /* 0 <= value <= 15 */ - set_brightness(value); - } else if (count < 0) { - printk(KERN_WARNING "Asus ACPI: Error reading user input\n"); - } - - return count; -} - -static void set_display(int value) -{ - /* no sanity check needed for now */ - if (!write_acpi_int(hotk->handle, hotk->methods->display_set, - value, NULL)) - printk(KERN_WARNING "Asus ACPI: Error setting display\n"); - return; -} - -/* - * Now, *this* one could be more user-friendly, but so far, no-one has - * complained. The significance of bits is the same as in proc_write_disp() - */ -static int -proc_read_disp(char *page, char **start, off_t off, int count, int *eof, - void *data) -{ - int value = 0; - - if (!read_acpi_int(hotk->handle, hotk->methods->display_get, &value)) - printk(KERN_WARNING - "Asus ACPI: Error reading display status\n"); - value &= 0x07; /* needed for some models, shouldn't hurt others */ - return sprintf(page, "%d\n", value); -} - -/* - * Experimental support for display switching. As of now: 1 should activate - * the LCD output, 2 should do for CRT, and 4 for TV-Out. Any combination - * (bitwise) of these will suffice. I never actually tested 3 displays hooked up - * simultaneously, so be warned. See the acpi4asus README for more info. - */ -static int -proc_write_disp(struct file *file, const char __user * buffer, - unsigned long count, void *data) -{ - int value; - - count = parse_arg(buffer, count, &value); - if (count > 0) - set_display(value); - else if (count < 0) - printk(KERN_WARNING "Asus ACPI: Error reading user input\n"); - - return count; -} - -typedef int (proc_readfunc) (char *page, char **start, off_t off, int count, - int *eof, void *data); -typedef int (proc_writefunc) (struct file * file, const char __user * buffer, - unsigned long count, void *data); - -static int -__init asus_proc_add(char *name, proc_writefunc * writefunc, - proc_readfunc * readfunc, mode_t mode, - struct acpi_device *device) -{ - struct proc_dir_entry *proc = - create_proc_entry(name, mode, acpi_device_dir(device)); - if (!proc) { - printk(KERN_WARNING " Unable to create %s fs entry\n", name); - return -1; - } - proc->write_proc = writefunc; - proc->read_proc = readfunc; - proc->data = acpi_driver_data(device); - proc->owner = THIS_MODULE; - proc->uid = asus_uid; - proc->gid = asus_gid; - return 0; -} - -static int __init asus_hotk_add_fs(struct acpi_device *device) -{ - struct proc_dir_entry *proc; - mode_t mode; - - /* - * If parameter uid or gid is not changed, keep the default setting for - * our proc entries (-rw-rw-rw-) else, it means we care about security, - * and then set to -rw-rw---- - */ - - if ((asus_uid == 0) && (asus_gid == 0)) { - mode = S_IFREG | S_IRUGO | S_IWUGO; - } else { - mode = S_IFREG | S_IRUSR | S_IRGRP | S_IWUSR | S_IWGRP; - } - - acpi_device_dir(device) = asus_proc_dir; - if (!acpi_device_dir(device)) - return -ENODEV; - - proc = create_proc_entry(PROC_INFO, mode, acpi_device_dir(device)); - if (proc) { - proc->read_proc = proc_read_info; - proc->data = acpi_driver_data(device); - proc->owner = THIS_MODULE; - proc->uid = asus_uid; - proc->gid = asus_gid; - } else { - printk(KERN_WARNING " Unable to create " PROC_INFO - " fs entry\n"); - } - - if (hotk->methods->mt_wled) { - asus_proc_add(PROC_WLED, &proc_write_wled, &proc_read_wled, - mode, device); - } - - if (hotk->methods->mt_mled) { - asus_proc_add(PROC_MLED, &proc_write_mled, &proc_read_mled, - mode, device); - } - - if (hotk->methods->mt_tled) { - asus_proc_add(PROC_TLED, &proc_write_tled, &proc_read_tled, - mode, device); - } - - /* - * We need both read node and write method as LCD switch is also accessible - * from keyboard - */ - if (hotk->methods->mt_lcd_switch && hotk->methods->lcd_status) { - asus_proc_add(PROC_LCD, &proc_write_lcd, &proc_read_lcd, mode, - device); - } - - if ((hotk->methods->brightness_up && hotk->methods->brightness_down) || - (hotk->methods->brightness_get && hotk->methods->brightness_set)) { - asus_proc_add(PROC_BRN, &proc_write_brn, &proc_read_brn, mode, - device); - } - - if (hotk->methods->display_set) { - asus_proc_add(PROC_DISP, &proc_write_disp, &proc_read_disp, - mode, device); - } - - return 0; -} - -static int asus_hotk_remove_fs(struct acpi_device *device) -{ - if (acpi_device_dir(device)) { - remove_proc_entry(PROC_INFO, acpi_device_dir(device)); - if (hotk->methods->mt_wled) - remove_proc_entry(PROC_WLED, acpi_device_dir(device)); - if (hotk->methods->mt_mled) - remove_proc_entry(PROC_MLED, acpi_device_dir(device)); - if (hotk->methods->mt_tled) - remove_proc_entry(PROC_TLED, acpi_device_dir(device)); - if (hotk->methods->mt_lcd_switch && hotk->methods->lcd_status) - remove_proc_entry(PROC_LCD, acpi_device_dir(device)); - if ((hotk->methods->brightness_up - && hotk->methods->brightness_down) - || (hotk->methods->brightness_get - && hotk->methods->brightness_set)) - remove_proc_entry(PROC_BRN, acpi_device_dir(device)); - if (hotk->methods->display_set) - remove_proc_entry(PROC_DISP, acpi_device_dir(device)); - } - return 0; -} - -static void asus_hotk_notify(acpi_handle handle, u32 event, void *data) -{ - /* TODO Find a better way to handle events count. */ - if (!hotk) - return; - - if ((event & ~((u32) BR_UP)) < 16) { - hotk->brightness = (event & ~((u32) BR_UP)); - } else if ((event & ~((u32) BR_DOWN)) < 16) { - hotk->brightness = (event & ~((u32) BR_DOWN)); - } - - acpi_bus_generate_event(hotk->device, event, - hotk->event_count[event % 128]++); - - return; -} - -/* - * This function is used to initialize the hotk with right values. In this - * method, we can make all the detection we want, and modify the hotk struct - */ -static int __init asus_hotk_get_info(void) -{ - struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; - struct acpi_buffer dsdt = { ACPI_ALLOCATE_BUFFER, NULL }; - union acpi_object *model = NULL; - int bsts_result; - acpi_status status; - - /* - * Get DSDT headers early enough to allow for differentiating between - * models, but late enough to allow acpi_bus_register_driver() to fail - * before doing anything ACPI-specific. Should we encounter a machine, - * which needs special handling (i.e. its hotkey device has a different - * HID), this bit will be moved. A global variable asus_info contains - * the DSDT header. - */ - status = acpi_get_table(ACPI_TABLE_DSDT, 1, &dsdt); - if (ACPI_FAILURE(status)) - printk(KERN_WARNING " Couldn't get the DSDT table header\n"); - else - asus_info = (struct acpi_table_header *)dsdt.pointer; - - /* We have to write 0 on init this far for all ASUS models */ - if (!write_acpi_int(hotk->handle, "INIT", 0, &buffer)) { - printk(KERN_ERR " Hotkey initialization failed\n"); - return -ENODEV; - } - - /* This needs to be called for some laptops to init properly */ - if (!read_acpi_int(hotk->handle, "BSTS", &bsts_result)) - printk(KERN_WARNING " Error calling BSTS\n"); - else if (bsts_result) - printk(KERN_NOTICE " BSTS called, 0x%02x returned\n", - bsts_result); - - /* Samsung P30 has a device with a valid _HID whose INIT does not - * return anything. Catch this one and any similar here */ - if (buffer.pointer == NULL) { - if (asus_info && /* Samsung P30 */ - strncmp(asus_info->oem_table_id, "ODEM", 4) == 0) { - hotk->model = P30; - printk(KERN_NOTICE - " Samsung P30 detected, supported\n"); - } else { - hotk->model = M2E; - printk(KERN_WARNING " no string returned by INIT\n"); - printk(KERN_WARNING " trying default values, supply " - "the developers with your DSDT\n"); - } - hotk->methods = &model_conf[hotk->model]; - return AE_OK; - } - - model = (union acpi_object *)buffer.pointer; - if (model->type == ACPI_TYPE_STRING) { - printk(KERN_NOTICE " %s model detected, ", - model->string.pointer); - } - - hotk->model = END_MODEL; - if (strncmp(model->string.pointer, "L3D", 3) == 0) - hotk->model = L3D; - else if (strncmp(model->string.pointer, "L3H", 3) == 0 || - strncmp(model->string.pointer, "L2E", 3) == 0) - hotk->model = L3H; - else if (strncmp(model->string.pointer, "L3", 2) == 0 || - strncmp(model->string.pointer, "L2B", 3) == 0) - hotk->model = L3C; - else if (strncmp(model->string.pointer, "L8L", 3) == 0) - hotk->model = L8L; - else if (strncmp(model->string.pointer, "L4R", 3) == 0) - hotk->model = L4R; - else if (strncmp(model->string.pointer, "M6N", 3) == 0) - hotk->model = M6N; - else if (strncmp(model->string.pointer, "M6R", 3) == 0) - hotk->model = M6R; - else if (strncmp(model->string.pointer, "M2N", 3) == 0 || - strncmp(model->string.pointer, "M3N", 3) == 0 || - strncmp(model->string.pointer, "M5N", 3) == 0 || - strncmp(model->string.pointer, "M6N", 3) == 0 || - strncmp(model->string.pointer, "S1N", 3) == 0 || - strncmp(model->string.pointer, "S5N", 3) == 0 || - strncmp(model->string.pointer, "W1N", 3) == 0) - hotk->model = xxN; - else if (strncmp(model->string.pointer, "M1", 2) == 0) - hotk->model = M1A; - else if (strncmp(model->string.pointer, "M2", 2) == 0 || - strncmp(model->string.pointer, "L4E", 3) == 0) - hotk->model = M2E; - else if (strncmp(model->string.pointer, "L2", 2) == 0) - hotk->model = L2D; - else if (strncmp(model->string.pointer, "L8", 2) == 0) - hotk->model = S1x; - else if (strncmp(model->string.pointer, "D1", 2) == 0) - hotk->model = D1x; - else if (strncmp(model->string.pointer, "A1", 2) == 0) - hotk->model = A1x; - else if (strncmp(model->string.pointer, "A2", 2) == 0) - hotk->model = A2x; - else if (strncmp(model->string.pointer, "J1", 2) == 0) - hotk->model = S2x; - else if (strncmp(model->string.pointer, "L5", 2) == 0) - hotk->model = L5x; - - if (hotk->model == END_MODEL) { - printk("unsupported, trying default values, supply the " - "developers with your DSDT\n"); - hotk->model = M2E; - } else { - printk("supported\n"); - } - - hotk->methods = &model_conf[hotk->model]; - - /* Sort of per-model blacklist */ - if (strncmp(model->string.pointer, "L2B", 3) == 0) - hotk->methods->lcd_status = NULL; - /* L2B is similar enough to L3C to use its settings, with this only - exception */ - else if (strncmp(model->string.pointer, "S5N", 3) == 0 || - strncmp(model->string.pointer, "M5N", 3) == 0) - hotk->methods->mt_mled = NULL; - /* S5N and M5N have no MLED */ - else if (strncmp(model->string.pointer, "M2N", 3) == 0 || - strncmp(model->string.pointer, "W1N", 3) == 0) - hotk->methods->mt_wled = "WLED"; - /* M2N and W1N have a usable WLED */ - else if (asus_info) { - if (strncmp(asus_info->oem_table_id, "L1", 2) == 0) - hotk->methods->mled_status = NULL; - /* S1300A reports L84F, but L1400B too, account for that */ - } - - acpi_os_free(model); - - return AE_OK; -} - -static int __init asus_hotk_check(void) -{ - int result = 0; - - result = acpi_bus_get_status(hotk->device); - if (result) - return result; - - if (hotk->device->status.present) { - result = asus_hotk_get_info(); - } else { - printk(KERN_ERR " Hotkey device not present, aborting\n"); - return -EINVAL; - } - - return result; -} - -static int __init asus_hotk_add(struct acpi_device *device) -{ - acpi_status status = AE_OK; - int result; - - if (!device) - return -EINVAL; - - printk(KERN_NOTICE "Asus Laptop ACPI Extras version %s\n", - ASUS_ACPI_VERSION); - - hotk = - (struct asus_hotk *)kmalloc(sizeof(struct asus_hotk), GFP_KERNEL); - if (!hotk) - return -ENOMEM; - memset(hotk, 0, sizeof(struct asus_hotk)); - - hotk->handle = device->handle; - strcpy(acpi_device_name(device), ACPI_HOTK_DEVICE_NAME); - strcpy(acpi_device_class(device), ACPI_HOTK_CLASS); - acpi_driver_data(device) = hotk; - hotk->device = device; - - result = asus_hotk_check(); - if (result) - goto end; - - result = asus_hotk_add_fs(device); - if (result) - goto end; - - /* - * We install the handler, it will receive the hotk in parameter, so, we - * could add other data to the hotk struct - */ - status = acpi_install_notify_handler(hotk->handle, ACPI_SYSTEM_NOTIFY, - asus_hotk_notify, hotk); - if (ACPI_FAILURE(status)) - printk(KERN_ERR " Error installing notify handler\n"); - - /* For laptops without GPLV: init the hotk->brightness value */ - if ((!hotk->methods->brightness_get) - && (!hotk->methods->brightness_status) - && (hotk->methods->brightness_up - && hotk->methods->brightness_down)) { - status = - acpi_evaluate_object(NULL, hotk->methods->brightness_down, - NULL, NULL); - if (ACPI_FAILURE(status)) - printk(KERN_WARNING " Error changing brightness\n"); - else { - status = - acpi_evaluate_object(NULL, - hotk->methods->brightness_up, - NULL, NULL); - if (ACPI_FAILURE(status)) - printk(KERN_WARNING " Strange, error changing" - " brightness\n"); - } - } - - end: - if (result) { - kfree(hotk); - } - - return result; -} - -static int asus_hotk_remove(struct acpi_device *device, int type) -{ - acpi_status status = 0; - - if (!device || !acpi_driver_data(device)) - return -EINVAL; - - status = acpi_remove_notify_handler(hotk->handle, ACPI_SYSTEM_NOTIFY, - asus_hotk_notify); - if (ACPI_FAILURE(status)) - printk(KERN_ERR "Asus ACPI: Error removing notify handler\n"); - - asus_hotk_remove_fs(device); - - kfree(hotk); - - return 0; -} - -static int __init asus_acpi_init(void) -{ - int result; - - if (acpi_disabled) - return -ENODEV; - - if (!acpi_specific_hotkey_enabled) { - printk(KERN_ERR "Using generic hotkey driver\n"); - return -ENODEV; - } - asus_proc_dir = proc_mkdir(PROC_ASUS, acpi_root_dir); - if (!asus_proc_dir) { - printk(KERN_ERR "Asus ACPI: Unable to create /proc entry\n"); - return -ENODEV; - } - asus_proc_dir->owner = THIS_MODULE; - - result = acpi_bus_register_driver(&asus_hotk_driver); - if (result < 1) { - acpi_bus_unregister_driver(&asus_hotk_driver); - remove_proc_entry(PROC_ASUS, acpi_root_dir); - return -ENODEV; - } - - return 0; -} - -static void __exit asus_acpi_exit(void) -{ - acpi_bus_unregister_driver(&asus_hotk_driver); - remove_proc_entry(PROC_ASUS, acpi_root_dir); - - acpi_os_free(asus_info); - - return; -} - -module_init(asus_acpi_init); -module_exit(asus_acpi_exit); diff --git a/drivers/acpi/drivers/legacy/Makefile b/drivers/acpi/drivers/legacy/Makefile index 94eab4e..df416c6 100644 --- a/drivers/acpi/drivers/legacy/Makefile +++ b/drivers/acpi/drivers/legacy/Makefile @@ -19,3 +19,5 @@ endif obj-$(CONFIG_ACPI_PROCESSOR) += processor.o obj-$(CONFIG_ACPI_THERMAL) += thermal.o obj-$(CONFIG_ACPI_VIDEO) += video.o + +obj-$(CONFIG_ACPI_ASUS) += asus_acpi.o diff --git a/drivers/acpi/drivers/legacy/asus_acpi.c b/drivers/acpi/drivers/legacy/asus_acpi.c new file mode 100644 index 0000000..fec895a --- /dev/null +++ b/drivers/acpi/drivers/legacy/asus_acpi.c @@ -0,0 +1,1238 @@ +/* + * asus_acpi.c - Asus Laptop ACPI Extras + * + * + * Copyright (C) 2002, 2003, 2004 Julien Lerouge, Karol Kozimor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * + * The development page for this driver is located at + * http://sourceforge.net/projects/acpi4asus/ + * + * Credits: + * Pontus Fuchs - Helper functions, cleanup + * Johann Wiesner - Small compile fixes + * John Belmonte - ACPI code for Toshiba laptop was a good starting point. + * + * TODO: + * add Fn key status + * Add mode selection on module loading (parameter) -> still necessary? + * Complete display switching -- may require dirty hacks or calling _DOS? + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define ASUS_ACPI_VERSION "0.29" + +#define PROC_ASUS "asus" //the directory +#define PROC_MLED "mled" +#define PROC_WLED "wled" +#define PROC_TLED "tled" +#define PROC_INFO "info" +#define PROC_LCD "lcd" +#define PROC_BRN "brn" +#define PROC_DISP "disp" + +#define ACPI_HOTK_NAME "Asus Laptop ACPI Extras Driver" +#define ACPI_HOTK_CLASS "hotkey" +#define ACPI_HOTK_DEVICE_NAME "Hotkey" +#define ACPI_HOTK_HID "ATK0100" + +/* + * Some events we use, same for all Asus + */ +#define BR_UP 0x10 +#define BR_DOWN 0x20 + +/* + * Flags for hotk status + */ +#define MLED_ON 0x01 //is MLED ON ? +#define WLED_ON 0x02 +#define TLED_ON 0x04 + +MODULE_AUTHOR("Julien Lerouge, Karol Kozimor"); +MODULE_DESCRIPTION(ACPI_HOTK_NAME); +MODULE_LICENSE("GPL"); + +static uid_t asus_uid; +static gid_t asus_gid; +module_param(asus_uid, uint, 0); +MODULE_PARM_DESC(uid, "UID for entries in /proc/acpi/asus.\n"); +module_param(asus_gid, uint, 0); +MODULE_PARM_DESC(gid, "GID for entries in /proc/acpi/asus.\n"); + +/* For each model, all features implemented, + * those marked with R are relative to HOTK, A for absolute */ +struct model_data { + char *name; //name of the laptop________________A + char *mt_mled; //method to handle mled_____________R + char *mled_status; //node to handle mled reading_______A + char *mt_wled; //method to handle wled_____________R + char *wled_status; //node to handle wled reading_______A + char *mt_tled; //method to handle tled_____________R + char *tled_status; //node to handle tled reading_______A + char *mt_lcd_switch; //method to turn LCD ON/OFF_________A + char *lcd_status; //node to read LCD panel state______A + char *brightness_up; //method to set brightness up_______A + char *brightness_down; //guess what ?______________________A + char *brightness_set; //method to set absolute brightness_R + char *brightness_get; //method to get absolute brightness_R + char *brightness_status; //node to get brightness____________A + char *display_set; //method to set video output________R + char *display_get; //method to get video output________R +}; + +/* + * This is the main structure, we can use it to store anything interesting + * about the hotk device + */ +struct asus_hotk { + struct acpi_device *device; //the device we are in + acpi_handle handle; //the handle of the hotk device + char status; //status of the hotk, for LEDs, ... + struct model_data *methods; //methods available on the laptop + u8 brightness; //brightness level + enum { + A1x = 0, //A1340D, A1300F + A2x, //A2500H + D1x, //D1 + L2D, //L2000D + L3C, //L3800C + L3D, //L3400D + L3H, //L3H, but also L2000E + L4R, //L4500R + L5x, //L5800C + L8L, //L8400L + M1A, //M1300A + M2E, //M2400E, L4400L + M6N, //M6800N + M6R, //M6700R + P30, //Samsung P30 + S1x, //S1300A, but also L1400B and M2400A (L84F) + S2x, //S200 (J1 reported), Victor MP-XP7210 + xxN, //M2400N, M3700N, M5200N, S1300N, S5200N, W1OOON + //(Centrino) + END_MODEL + } model; //Models currently supported + u16 event_count[128]; //count for each event TODO make this better +}; + +/* Here we go */ +#define A1x_PREFIX "\\_SB.PCI0.ISA.EC0." +#define L3C_PREFIX "\\_SB.PCI0.PX40.ECD0." +#define M1A_PREFIX "\\_SB.PCI0.PX40.EC0." +#define P30_PREFIX "\\_SB.PCI0.LPCB.EC0." +#define S1x_PREFIX "\\_SB.PCI0.PX40." +#define S2x_PREFIX A1x_PREFIX +#define xxN_PREFIX "\\_SB.PCI0.SBRG.EC0." + +static struct model_data model_conf[END_MODEL] = { + /* + * Those pathnames are relative to the HOTK / ATKD device : + * - mt_mled + * - mt_wled + * - brightness_set + * - brightness_get + * - display_set + * - display_get + * + * TODO I have seen a SWBX and AIBX method on some models, like L1400B, + * it seems to be a kind of switch, but what for ? + * + */ + + { + .name = "A1x", + .mt_mled = "MLED", + .mled_status = "\\MAIL", + .mt_lcd_switch = A1x_PREFIX "_Q10", + .lcd_status = "\\BKLI", + .brightness_up = A1x_PREFIX "_Q0E", + .brightness_down = A1x_PREFIX "_Q0F"}, + + { + .name = "A2x", + .mt_mled = "MLED", + .mt_wled = "WLED", + .wled_status = "\\SG66", + .mt_lcd_switch = "\\Q10", + .lcd_status = "\\BAOF", + .brightness_set = "SPLV", + .brightness_get = "GPLV", + .display_set = "SDSP", + .display_get = "\\INFB"}, + + { + .name = "D1x", + .mt_mled = "MLED", + .mt_lcd_switch = "\\Q0D", + .lcd_status = "\\GP11", + .brightness_up = "\\Q0C", + .brightness_down = "\\Q0B", + .brightness_status = "\\BLVL", + .display_set = "SDSP", + .display_get = "\\INFB"}, + + { + .name = "L2D", + .mt_mled = "MLED", + .mled_status = "\\SGP6", + .mt_wled = "WLED", + .wled_status = "\\RCP3", + .mt_lcd_switch = "\\Q10", + .lcd_status = "\\SGP0", + .brightness_up = "\\Q0E", + .brightness_down = "\\Q0F", + .display_set = "SDSP", + .display_get = "\\INFB"}, + + { + .name = "L3C", + .mt_mled = "MLED", + .mt_wled = "WLED", + .mt_lcd_switch = L3C_PREFIX "_Q10", + .lcd_status = "\\GL32", + .brightness_set = "SPLV", + .brightness_get = "GPLV", + .display_set = "SDSP", + .display_get = "\\_SB.PCI0.PCI1.VGAC.NMAP"}, + + { + .name = "L3D", + .mt_mled = "MLED", + .mled_status = "\\MALD", + .mt_wled = "WLED", + .mt_lcd_switch = "\\Q10", + .lcd_status = "\\BKLG", + .brightness_set = "SPLV", + .brightness_get = "GPLV", + .display_set = "SDSP", + .display_get = "\\INFB"}, + + { + .name = "L3H", + .mt_mled = "MLED", + .mt_wled = "WLED", + .mt_lcd_switch = "EHK", + .lcd_status = "\\_SB.PCI0.PM.PBC", + .brightness_set = "SPLV", + .brightness_get = "GPLV", + .display_set = "SDSP", + .display_get = "\\INFB"}, + + { + .name = "L4R", + .mt_mled = "MLED", + .mt_wled = "WLED", + .wled_status = "\\_SB.PCI0.SBRG.SG13", + .mt_lcd_switch = xxN_PREFIX "_Q10", + .lcd_status = "\\_SB.PCI0.SBSM.SEO4", + .brightness_set = "SPLV", + .brightness_get = "GPLV", + .display_set = "SDSP", + .display_get = "\\_SB.PCI0.P0P1.VGA.GETD"}, + + { + .name = "L5x", + .mt_mled = "MLED", +/* WLED present, but not controlled by ACPI */ + .mt_tled = "TLED", + .mt_lcd_switch = "\\Q0D", + .lcd_status = "\\BAOF", + .brightness_set = "SPLV", + .brightness_get = "GPLV", + .display_set = "SDSP", + .display_get = "\\INFB"}, + + { + .name = "L8L" +/* No features, but at least support the hotkeys */ + }, + + { + .name = "M1A", + .mt_mled = "MLED", + .mt_lcd_switch = M1A_PREFIX "Q10", + .lcd_status = "\\PNOF", + .brightness_up = M1A_PREFIX "Q0E", + .brightness_down = M1A_PREFIX "Q0F", + .brightness_status = "\\BRIT", + .display_set = "SDSP", + .display_get = "\\INFB"}, + + { + .name = "M2E", + .mt_mled = "MLED", + .mt_wled = "WLED", + .mt_lcd_switch = "\\Q10", + .lcd_status = "\\GP06", + .brightness_set = "SPLV", + .brightness_get = "GPLV", + .display_set = "SDSP", + .display_get = "\\INFB"}, + + { + .name = "M6N", + .mt_mled = "MLED", + .mt_wled = "WLED", + .wled_status = "\\_SB.PCI0.SBRG.SG13", + .mt_lcd_switch = xxN_PREFIX "_Q10", + .lcd_status = "\\_SB.BKLT", + .brightness_set = "SPLV", + .brightness_get = "GPLV", + .display_set = "SDSP", + .display_get = "\\SSTE"}, + { + .name = "M6R", + .mt_mled = "MLED", + .mt_wled = "WLED", + .mt_lcd_switch = xxN_PREFIX "_Q10", + .lcd_status = "\\_SB.PCI0.SBSM.SEO4", + .brightness_set = "SPLV", + .brightness_get = "GPLV", + .display_set = "SDSP", + .display_get = "\\SSTE"}, + + { + .name = "P30", + .mt_wled = "WLED", + .mt_lcd_switch = P30_PREFIX "_Q0E", + .lcd_status = "\\BKLT", + .brightness_up = P30_PREFIX "_Q68", + .brightness_down = P30_PREFIX "_Q69", + .brightness_get = "GPLV", + .display_set = "SDSP", + .display_get = "\\DNXT"}, + + { + .name = "S1x", + .mt_mled = "MLED", + .mled_status = "\\EMLE", + .mt_wled = "WLED", + .mt_lcd_switch = S1x_PREFIX "Q10", + .lcd_status = "\\PNOF", + .brightness_set = "SPLV", + .brightness_get = "GPLV"}, + + { + .name = "S2x", + .mt_mled = "MLED", + .mled_status = "\\MAIL", + .mt_lcd_switch = S2x_PREFIX "_Q10", + .lcd_status = "\\BKLI", + .brightness_up = S2x_PREFIX "_Q0B", + .brightness_down = S2x_PREFIX "_Q0A"}, + + { + .name = "xxN", + .mt_mled = "MLED", +/* WLED present, but not controlled by ACPI */ + .mt_lcd_switch = xxN_PREFIX "_Q10", + .lcd_status = "\\BKLT", + .brightness_set = "SPLV", + .brightness_get = "GPLV", + .display_set = "SDSP", + .display_get = "\\ADVG"} +}; + +/* procdir we use */ +static struct proc_dir_entry *asus_proc_dir; + +/* + * This header is made available to allow proper configuration given model, + * revision number , ... this info cannot go in struct asus_hotk because it is + * available before the hotk + */ +static struct acpi_table_header *asus_info; + +/* The actual device the driver binds to */ +static struct asus_hotk *hotk; + +/* + * The hotkey driver declaration + */ +static int asus_hotk_add(struct acpi_device *device); +static int asus_hotk_remove(struct acpi_device *device, int type); +static struct acpi_driver asus_hotk_driver = { + .name = ACPI_HOTK_NAME, + .class = ACPI_HOTK_CLASS, + .ids = ACPI_HOTK_HID, + .ops = { + .add = asus_hotk_add, + .remove = asus_hotk_remove, + }, +}; + +/* + * This function evaluates an ACPI method, given an int as parameter, the + * method is searched within the scope of the handle, can be NULL. The output + * of the method is written is output, which can also be NULL + * + * returns 1 if write is successful, 0 else. + */ +static int write_acpi_int(acpi_handle handle, const char *method, int val, + struct acpi_buffer *output) +{ + struct acpi_object_list params; //list of input parameters (an int here) + union acpi_object in_obj; //the only param we use + acpi_status status; + + params.count = 1; + params.pointer = &in_obj; + in_obj.type = ACPI_TYPE_INTEGER; + in_obj.integer.value = val; + + status = acpi_evaluate_object(handle, (char *)method, ¶ms, output); + return (status == AE_OK); +} + +static int read_acpi_int(acpi_handle handle, const char *method, int *val) +{ + struct acpi_buffer output; + union acpi_object out_obj; + acpi_status status; + + output.length = sizeof(out_obj); + output.pointer = &out_obj; + + status = acpi_evaluate_object(handle, (char *)method, NULL, &output); + *val = out_obj.integer.value; + return (status == AE_OK) && (out_obj.type == ACPI_TYPE_INTEGER); +} + +/* + * We write our info in page, we begin at offset off and cannot write more + * than count bytes. We set eof to 1 if we handle those 2 values. We return the + * number of bytes written in page + */ +static int +proc_read_info(char *page, char **start, off_t off, int count, int *eof, + void *data) +{ + int len = 0; + int temp; + char buf[16]; //enough for all info + /* + * We use the easy way, we don't care of off and count, so we don't set eof + * to 1 + */ + + len += sprintf(page, ACPI_HOTK_NAME " " ASUS_ACPI_VERSION "\n"); + len += sprintf(page + len, "Model reference : %s\n", + hotk->methods->name); + /* + * The SFUN method probably allows the original driver to get the list + * of features supported by a given model. For now, 0x0100 or 0x0800 + * bit signifies that the laptop is equipped with a Wi-Fi MiniPCI card. + * The significance of others is yet to be found. + */ + if (read_acpi_int(hotk->handle, "SFUN", &temp)) + len += + sprintf(page + len, "SFUN value : 0x%04x\n", temp); + /* + * Another value for userspace: the ASYM method returns 0x02 for + * battery low and 0x04 for battery critical, its readings tend to be + * more accurate than those provided by _BST. + * Note: since not all the laptops provide this method, errors are + * silently ignored. + */ + if (read_acpi_int(hotk->handle, "ASYM", &temp)) + len += + sprintf(page + len, "ASYM value : 0x%04x\n", temp); + if (asus_info) { + snprintf(buf, 16, "%d", asus_info->length); + len += sprintf(page + len, "DSDT length : %s\n", buf); + snprintf(buf, 16, "%d", asus_info->checksum); + len += sprintf(page + len, "DSDT checksum : %s\n", buf); + snprintf(buf, 16, "%d", asus_info->revision); + len += sprintf(page + len, "DSDT revision : %s\n", buf); + snprintf(buf, 7, "%s", asus_info->oem_id); + len += sprintf(page + len, "OEM id : %s\n", buf); + snprintf(buf, 9, "%s", asus_info->oem_table_id); + len += sprintf(page + len, "OEM table id : %s\n", buf); + snprintf(buf, 16, "%x", asus_info->oem_revision); + len += sprintf(page + len, "OEM revision : 0x%s\n", buf); + snprintf(buf, 5, "%s", asus_info->asl_compiler_id); + len += sprintf(page + len, "ASL comp vendor id : %s\n", buf); + snprintf(buf, 16, "%x", asus_info->asl_compiler_revision); + len += sprintf(page + len, "ASL comp revision : 0x%s\n", buf); + } + + return len; +} + +/* + * /proc handlers + * We write our info in page, we begin at offset off and cannot write more + * than count bytes. We set eof to 1 if we handle those 2 values. We return the + * number of bytes written in page + */ + +/* Generic LED functions */ +static int read_led(const char *ledname, int ledmask) +{ + if (ledname) { + int led_status; + + if (read_acpi_int(NULL, ledname, &led_status)) + return led_status; + else + printk(KERN_WARNING "Asus ACPI: Error reading LED " + "status\n"); + } + return (hotk->status & ledmask) ? 1 : 0; +} + +static int parse_arg(const char __user * buf, unsigned long count, int *val) +{ + char s[32]; + if (!count) + return 0; + if (count > 31) + return -EINVAL; + if (copy_from_user(s, buf, count)) + return -EFAULT; + s[count] = 0; + if (sscanf(s, "%i", val) != 1) + return -EINVAL; + return count; +} + +/* FIXME: kill extraneous args so it can be called independently */ +static int +write_led(const char __user * buffer, unsigned long count, + char *ledname, int ledmask, int invert) +{ + int value; + int led_out = 0; + + count = parse_arg(buffer, count, &value); + if (count > 0) + led_out = value ? 1 : 0; + + hotk->status = + (led_out) ? (hotk->status | ledmask) : (hotk->status & ~ledmask); + + if (invert) /* invert target value */ + led_out = !led_out & 0x1; + + if (!write_acpi_int(hotk->handle, ledname, led_out, NULL)) + printk(KERN_WARNING "Asus ACPI: LED (%s) write failed\n", + ledname); + + return count; +} + +/* + * Proc handlers for MLED + */ +static int +proc_read_mled(char *page, char **start, off_t off, int count, int *eof, + void *data) +{ + return sprintf(page, "%d\n", + read_led(hotk->methods->mled_status, MLED_ON)); +} + +static int +proc_write_mled(struct file *file, const char __user * buffer, + unsigned long count, void *data) +{ + return write_led(buffer, count, hotk->methods->mt_mled, MLED_ON, 1); +} + +/* + * Proc handlers for WLED + */ +static int +proc_read_wled(char *page, char **start, off_t off, int count, int *eof, + void *data) +{ + return sprintf(page, "%d\n", + read_led(hotk->methods->wled_status, WLED_ON)); +} + +static int +proc_write_wled(struct file *file, const char __user * buffer, + unsigned long count, void *data) +{ + return write_led(buffer, count, hotk->methods->mt_wled, WLED_ON, 0); +} + +/* + * Proc handlers for TLED + */ +static int +proc_read_tled(char *page, char **start, off_t off, int count, int *eof, + void *data) +{ + return sprintf(page, "%d\n", + read_led(hotk->methods->tled_status, TLED_ON)); +} + +static int +proc_write_tled(struct file *file, const char __user * buffer, + unsigned long count, void *data) +{ + return write_led(buffer, count, hotk->methods->mt_tled, TLED_ON, 0); +} + +static int get_lcd_state(void) +{ + int lcd = 0; + + if (hotk->model != L3H) { + /* We don't have to check anything if we are here */ + if (!read_acpi_int(NULL, hotk->methods->lcd_status, &lcd)) + printk(KERN_WARNING + "Asus ACPI: Error reading LCD status\n"); + + if (hotk->model == L2D) + lcd = ~lcd; + } else { /* L3H and the like have to be handled differently */ + acpi_status status = 0; + struct acpi_object_list input; + union acpi_object mt_params[2]; + struct acpi_buffer output; + union acpi_object out_obj; + + input.count = 2; + input.pointer = mt_params; + /* Note: the following values are partly guessed up, but + otherwise they seem to work */ + mt_params[0].type = ACPI_TYPE_INTEGER; + mt_params[0].integer.value = 0x02; + mt_params[1].type = ACPI_TYPE_INTEGER; + mt_params[1].integer.value = 0x02; + + output.length = sizeof(out_obj); + output.pointer = &out_obj; + + status = + acpi_evaluate_object(NULL, hotk->methods->lcd_status, + &input, &output); + if (status != AE_OK) + return -1; + if (out_obj.type == ACPI_TYPE_INTEGER) + /* That's what the AML code does */ + lcd = out_obj.integer.value >> 8; + } + + return (lcd & 1); +} + +static int set_lcd_state(int value) +{ + int lcd = 0; + acpi_status status = 0; + + lcd = value ? 1 : 0; + if (lcd != get_lcd_state()) { + /* switch */ + if (hotk->model != L3H) { + status = + acpi_evaluate_object(NULL, + hotk->methods->mt_lcd_switch, + NULL, NULL); + } else { /* L3H and the like have to be handled differently */ + if (!write_acpi_int + (hotk->handle, hotk->methods->mt_lcd_switch, 0x07, + NULL)) + status = AE_ERROR; + /* L3H's AML executes EHK (0x07) upon Fn+F7 keypress, + the exact behaviour is simulated here */ + } + if (ACPI_FAILURE(status)) + printk(KERN_WARNING "Asus ACPI: Error switching LCD\n"); + } + return 0; + +} + +static int +proc_read_lcd(char *page, char **start, off_t off, int count, int *eof, + void *data) +{ + return sprintf(page, "%d\n", get_lcd_state()); +} + +static int +proc_write_lcd(struct file *file, const char __user * buffer, + unsigned long count, void *data) +{ + int value; + + count = parse_arg(buffer, count, &value); + if (count > 0) + set_lcd_state(value); + return count; +} + +static int read_brightness(void) +{ + int value; + + if (hotk->methods->brightness_get) { /* SPLV/GPLV laptop */ + if (!read_acpi_int(hotk->handle, hotk->methods->brightness_get, + &value)) + printk(KERN_WARNING + "Asus ACPI: Error reading brightness\n"); + } else if (hotk->methods->brightness_status) { /* For D1 for example */ + if (!read_acpi_int(NULL, hotk->methods->brightness_status, + &value)) + printk(KERN_WARNING + "Asus ACPI: Error reading brightness\n"); + } else /* No GPLV method */ + value = hotk->brightness; + return value; +} + +/* + * Change the brightness level + */ +static void set_brightness(int value) +{ + acpi_status status = 0; + + /* SPLV laptop */ + if (hotk->methods->brightness_set) { + if (!write_acpi_int(hotk->handle, hotk->methods->brightness_set, + value, NULL)) + printk(KERN_WARNING + "Asus ACPI: Error changing brightness\n"); + return; + } + + /* No SPLV method if we are here, act as appropriate */ + value -= read_brightness(); + while (value != 0) { + status = acpi_evaluate_object(NULL, (value > 0) ? + hotk->methods->brightness_up : + hotk->methods->brightness_down, + NULL, NULL); + (value > 0) ? value-- : value++; + if (ACPI_FAILURE(status)) + printk(KERN_WARNING + "Asus ACPI: Error changing brightness\n"); + } + return; +} + +static int +proc_read_brn(char *page, char **start, off_t off, int count, int *eof, + void *data) +{ + return sprintf(page, "%d\n", read_brightness()); +} + +static int +proc_write_brn(struct file *file, const char __user * buffer, + unsigned long count, void *data) +{ + int value; + + count = parse_arg(buffer, count, &value); + if (count > 0) { + value = (0 < value) ? ((15 < value) ? 15 : value) : 0; + /* 0 <= value <= 15 */ + set_brightness(value); + } else if (count < 0) { + printk(KERN_WARNING "Asus ACPI: Error reading user input\n"); + } + + return count; +} + +static void set_display(int value) +{ + /* no sanity check needed for now */ + if (!write_acpi_int(hotk->handle, hotk->methods->display_set, + value, NULL)) + printk(KERN_WARNING "Asus ACPI: Error setting display\n"); + return; +} + +/* + * Now, *this* one could be more user-friendly, but so far, no-one has + * complained. The significance of bits is the same as in proc_write_disp() + */ +static int +proc_read_disp(char *page, char **start, off_t off, int count, int *eof, + void *data) +{ + int value = 0; + + if (!read_acpi_int(hotk->handle, hotk->methods->display_get, &value)) + printk(KERN_WARNING + "Asus ACPI: Error reading display status\n"); + value &= 0x07; /* needed for some models, shouldn't hurt others */ + return sprintf(page, "%d\n", value); +} + +/* + * Experimental support for display switching. As of now: 1 should activate + * the LCD output, 2 should do for CRT, and 4 for TV-Out. Any combination + * (bitwise) of these will suffice. I never actually tested 3 displays hooked up + * simultaneously, so be warned. See the acpi4asus README for more info. + */ +static int +proc_write_disp(struct file *file, const char __user * buffer, + unsigned long count, void *data) +{ + int value; + + count = parse_arg(buffer, count, &value); + if (count > 0) + set_display(value); + else if (count < 0) + printk(KERN_WARNING "Asus ACPI: Error reading user input\n"); + + return count; +} + +typedef int (proc_readfunc) (char *page, char **start, off_t off, int count, + int *eof, void *data); +typedef int (proc_writefunc) (struct file * file, const char __user * buffer, + unsigned long count, void *data); + +static int +__init asus_proc_add(char *name, proc_writefunc * writefunc, + proc_readfunc * readfunc, mode_t mode, + struct acpi_device *device) +{ + struct proc_dir_entry *proc = + create_proc_entry(name, mode, acpi_device_dir(device)); + if (!proc) { + printk(KERN_WARNING " Unable to create %s fs entry\n", name); + return -1; + } + proc->write_proc = writefunc; + proc->read_proc = readfunc; + proc->data = acpi_driver_data(device); + proc->owner = THIS_MODULE; + proc->uid = asus_uid; + proc->gid = asus_gid; + return 0; +} + +static int __init asus_hotk_add_fs(struct acpi_device *device) +{ + struct proc_dir_entry *proc; + mode_t mode; + + /* + * If parameter uid or gid is not changed, keep the default setting for + * our proc entries (-rw-rw-rw-) else, it means we care about security, + * and then set to -rw-rw---- + */ + + if ((asus_uid == 0) && (asus_gid == 0)) { + mode = S_IFREG | S_IRUGO | S_IWUGO; + } else { + mode = S_IFREG | S_IRUSR | S_IRGRP | S_IWUSR | S_IWGRP; + } + + acpi_device_dir(device) = asus_proc_dir; + if (!acpi_device_dir(device)) + return -ENODEV; + + proc = create_proc_entry(PROC_INFO, mode, acpi_device_dir(device)); + if (proc) { + proc->read_proc = proc_read_info; + proc->data = acpi_driver_data(device); + proc->owner = THIS_MODULE; + proc->uid = asus_uid; + proc->gid = asus_gid; + } else { + printk(KERN_WARNING " Unable to create " PROC_INFO + " fs entry\n"); + } + + if (hotk->methods->mt_wled) { + asus_proc_add(PROC_WLED, &proc_write_wled, &proc_read_wled, + mode, device); + } + + if (hotk->methods->mt_mled) { + asus_proc_add(PROC_MLED, &proc_write_mled, &proc_read_mled, + mode, device); + } + + if (hotk->methods->mt_tled) { + asus_proc_add(PROC_TLED, &proc_write_tled, &proc_read_tled, + mode, device); + } + + /* + * We need both read node and write method as LCD switch is also accessible + * from keyboard + */ + if (hotk->methods->mt_lcd_switch && hotk->methods->lcd_status) { + asus_proc_add(PROC_LCD, &proc_write_lcd, &proc_read_lcd, mode, + device); + } + + if ((hotk->methods->brightness_up && hotk->methods->brightness_down) || + (hotk->methods->brightness_get && hotk->methods->brightness_set)) { + asus_proc_add(PROC_BRN, &proc_write_brn, &proc_read_brn, mode, + device); + } + + if (hotk->methods->display_set) { + asus_proc_add(PROC_DISP, &proc_write_disp, &proc_read_disp, + mode, device); + } + + return 0; +} + +static int asus_hotk_remove_fs(struct acpi_device *device) +{ + if (acpi_device_dir(device)) { + remove_proc_entry(PROC_INFO, acpi_device_dir(device)); + if (hotk->methods->mt_wled) + remove_proc_entry(PROC_WLED, acpi_device_dir(device)); + if (hotk->methods->mt_mled) + remove_proc_entry(PROC_MLED, acpi_device_dir(device)); + if (hotk->methods->mt_tled) + remove_proc_entry(PROC_TLED, acpi_device_dir(device)); + if (hotk->methods->mt_lcd_switch && hotk->methods->lcd_status) + remove_proc_entry(PROC_LCD, acpi_device_dir(device)); + if ((hotk->methods->brightness_up + && hotk->methods->brightness_down) + || (hotk->methods->brightness_get + && hotk->methods->brightness_set)) + remove_proc_entry(PROC_BRN, acpi_device_dir(device)); + if (hotk->methods->display_set) + remove_proc_entry(PROC_DISP, acpi_device_dir(device)); + } + return 0; +} + +static void asus_hotk_notify(acpi_handle handle, u32 event, void *data) +{ + /* TODO Find a better way to handle events count. */ + if (!hotk) + return; + + if ((event & ~((u32) BR_UP)) < 16) { + hotk->brightness = (event & ~((u32) BR_UP)); + } else if ((event & ~((u32) BR_DOWN)) < 16) { + hotk->brightness = (event & ~((u32) BR_DOWN)); + } + + acpi_bus_generate_event(hotk->device, event, + hotk->event_count[event % 128]++); + + return; +} + +/* + * This function is used to initialize the hotk with right values. In this + * method, we can make all the detection we want, and modify the hotk struct + */ +static int __init asus_hotk_get_info(void) +{ + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + struct acpi_buffer dsdt = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *model = NULL; + int bsts_result; + acpi_status status; + + /* + * Get DSDT headers early enough to allow for differentiating between + * models, but late enough to allow acpi_bus_register_driver() to fail + * before doing anything ACPI-specific. Should we encounter a machine, + * which needs special handling (i.e. its hotkey device has a different + * HID), this bit will be moved. A global variable asus_info contains + * the DSDT header. + */ + status = acpi_get_table(ACPI_TABLE_DSDT, 1, &dsdt); + if (ACPI_FAILURE(status)) + printk(KERN_WARNING " Couldn't get the DSDT table header\n"); + else + asus_info = (struct acpi_table_header *)dsdt.pointer; + + /* We have to write 0 on init this far for all ASUS models */ + if (!write_acpi_int(hotk->handle, "INIT", 0, &buffer)) { + printk(KERN_ERR " Hotkey initialization failed\n"); + return -ENODEV; + } + + /* This needs to be called for some laptops to init properly */ + if (!read_acpi_int(hotk->handle, "BSTS", &bsts_result)) + printk(KERN_WARNING " Error calling BSTS\n"); + else if (bsts_result) + printk(KERN_NOTICE " BSTS called, 0x%02x returned\n", + bsts_result); + + /* Samsung P30 has a device with a valid _HID whose INIT does not + * return anything. Catch this one and any similar here */ + if (buffer.pointer == NULL) { + if (asus_info && /* Samsung P30 */ + strncmp(asus_info->oem_table_id, "ODEM", 4) == 0) { + hotk->model = P30; + printk(KERN_NOTICE + " Samsung P30 detected, supported\n"); + } else { + hotk->model = M2E; + printk(KERN_WARNING " no string returned by INIT\n"); + printk(KERN_WARNING " trying default values, supply " + "the developers with your DSDT\n"); + } + hotk->methods = &model_conf[hotk->model]; + return AE_OK; + } + + model = (union acpi_object *)buffer.pointer; + if (model->type == ACPI_TYPE_STRING) { + printk(KERN_NOTICE " %s model detected, ", + model->string.pointer); + } + + hotk->model = END_MODEL; + if (strncmp(model->string.pointer, "L3D", 3) == 0) + hotk->model = L3D; + else if (strncmp(model->string.pointer, "L3H", 3) == 0 || + strncmp(model->string.pointer, "L2E", 3) == 0) + hotk->model = L3H; + else if (strncmp(model->string.pointer, "L3", 2) == 0 || + strncmp(model->string.pointer, "L2B", 3) == 0) + hotk->model = L3C; + else if (strncmp(model->string.pointer, "L8L", 3) == 0) + hotk->model = L8L; + else if (strncmp(model->string.pointer, "L4R", 3) == 0) + hotk->model = L4R; + else if (strncmp(model->string.pointer, "M6N", 3) == 0) + hotk->model = M6N; + else if (strncmp(model->string.pointer, "M6R", 3) == 0) + hotk->model = M6R; + else if (strncmp(model->string.pointer, "M2N", 3) == 0 || + strncmp(model->string.pointer, "M3N", 3) == 0 || + strncmp(model->string.pointer, "M5N", 3) == 0 || + strncmp(model->string.pointer, "M6N", 3) == 0 || + strncmp(model->string.pointer, "S1N", 3) == 0 || + strncmp(model->string.pointer, "S5N", 3) == 0 || + strncmp(model->string.pointer, "W1N", 3) == 0) + hotk->model = xxN; + else if (strncmp(model->string.pointer, "M1", 2) == 0) + hotk->model = M1A; + else if (strncmp(model->string.pointer, "M2", 2) == 0 || + strncmp(model->string.pointer, "L4E", 3) == 0) + hotk->model = M2E; + else if (strncmp(model->string.pointer, "L2", 2) == 0) + hotk->model = L2D; + else if (strncmp(model->string.pointer, "L8", 2) == 0) + hotk->model = S1x; + else if (strncmp(model->string.pointer, "D1", 2) == 0) + hotk->model = D1x; + else if (strncmp(model->string.pointer, "A1", 2) == 0) + hotk->model = A1x; + else if (strncmp(model->string.pointer, "A2", 2) == 0) + hotk->model = A2x; + else if (strncmp(model->string.pointer, "J1", 2) == 0) + hotk->model = S2x; + else if (strncmp(model->string.pointer, "L5", 2) == 0) + hotk->model = L5x; + + if (hotk->model == END_MODEL) { + printk("unsupported, trying default values, supply the " + "developers with your DSDT\n"); + hotk->model = M2E; + } else { + printk("supported\n"); + } + + hotk->methods = &model_conf[hotk->model]; + + /* Sort of per-model blacklist */ + if (strncmp(model->string.pointer, "L2B", 3) == 0) + hotk->methods->lcd_status = NULL; + /* L2B is similar enough to L3C to use its settings, with this only + exception */ + else if (strncmp(model->string.pointer, "S5N", 3) == 0 || + strncmp(model->string.pointer, "M5N", 3) == 0) + hotk->methods->mt_mled = NULL; + /* S5N and M5N have no MLED */ + else if (strncmp(model->string.pointer, "M2N", 3) == 0 || + strncmp(model->string.pointer, "W1N", 3) == 0) + hotk->methods->mt_wled = "WLED"; + /* M2N and W1N have a usable WLED */ + else if (asus_info) { + if (strncmp(asus_info->oem_table_id, "L1", 2) == 0) + hotk->methods->mled_status = NULL; + /* S1300A reports L84F, but L1400B too, account for that */ + } + + acpi_os_free(model); + + return AE_OK; +} + +static int __init asus_hotk_check(void) +{ + int result = 0; + + result = acpi_bus_get_status(hotk->device); + if (result) + return result; + + if (hotk->device->status.present) { + result = asus_hotk_get_info(); + } else { + printk(KERN_ERR " Hotkey device not present, aborting\n"); + return -EINVAL; + } + + return result; +} + +static int __init asus_hotk_add(struct acpi_device *device) +{ + acpi_status status = AE_OK; + int result; + + if (!device) + return -EINVAL; + + printk(KERN_NOTICE "Asus Laptop ACPI Extras version %s\n", + ASUS_ACPI_VERSION); + + hotk = + (struct asus_hotk *)kmalloc(sizeof(struct asus_hotk), GFP_KERNEL); + if (!hotk) + return -ENOMEM; + memset(hotk, 0, sizeof(struct asus_hotk)); + + hotk->handle = device->handle; + strcpy(acpi_device_name(device), ACPI_HOTK_DEVICE_NAME); + strcpy(acpi_device_class(device), ACPI_HOTK_CLASS); + acpi_driver_data(device) = hotk; + hotk->device = device; + + result = asus_hotk_check(); + if (result) + goto end; + + result = asus_hotk_add_fs(device); + if (result) + goto end; + + /* + * We install the handler, it will receive the hotk in parameter, so, we + * could add other data to the hotk struct + */ + status = acpi_install_notify_handler(hotk->handle, ACPI_SYSTEM_NOTIFY, + asus_hotk_notify, hotk); + if (ACPI_FAILURE(status)) + printk(KERN_ERR " Error installing notify handler\n"); + + /* For laptops without GPLV: init the hotk->brightness value */ + if ((!hotk->methods->brightness_get) + && (!hotk->methods->brightness_status) + && (hotk->methods->brightness_up + && hotk->methods->brightness_down)) { + status = + acpi_evaluate_object(NULL, hotk->methods->brightness_down, + NULL, NULL); + if (ACPI_FAILURE(status)) + printk(KERN_WARNING " Error changing brightness\n"); + else { + status = + acpi_evaluate_object(NULL, + hotk->methods->brightness_up, + NULL, NULL); + if (ACPI_FAILURE(status)) + printk(KERN_WARNING " Strange, error changing" + " brightness\n"); + } + } + + end: + if (result) { + kfree(hotk); + } + + return result; +} + +static int asus_hotk_remove(struct acpi_device *device, int type) +{ + acpi_status status = 0; + + if (!device || !acpi_driver_data(device)) + return -EINVAL; + + status = acpi_remove_notify_handler(hotk->handle, ACPI_SYSTEM_NOTIFY, + asus_hotk_notify); + if (ACPI_FAILURE(status)) + printk(KERN_ERR "Asus ACPI: Error removing notify handler\n"); + + asus_hotk_remove_fs(device); + + kfree(hotk); + + return 0; +} + +static int __init asus_acpi_init(void) +{ + int result; + + if (acpi_disabled) + return -ENODEV; + + if (!acpi_specific_hotkey_enabled) { + printk(KERN_ERR "Using generic hotkey driver\n"); + return -ENODEV; + } + asus_proc_dir = proc_mkdir(PROC_ASUS, acpi_root_dir); + if (!asus_proc_dir) { + printk(KERN_ERR "Asus ACPI: Unable to create /proc entry\n"); + return -ENODEV; + } + asus_proc_dir->owner = THIS_MODULE; + + result = acpi_bus_register_driver(&asus_hotk_driver); + if (result < 1) { + acpi_bus_unregister_driver(&asus_hotk_driver); + remove_proc_entry(PROC_ASUS, acpi_root_dir); + return -ENODEV; + } + + return 0; +} + +static void __exit asus_acpi_exit(void) +{ + acpi_bus_unregister_driver(&asus_hotk_driver); + remove_proc_entry(PROC_ASUS, acpi_root_dir); + + acpi_os_free(asus_info); + + return; +} + +module_init(asus_acpi_init); +module_exit(asus_acpi_exit); --- 0.99.9.GIT