From 50d8308953fde4391811d50f00806244b988b10f Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 6 Dec 2006 17:14:06 -0800 Subject: [PATCH] ARM: OMAP: USB peripheral support on H4 H4 has two peripheral ports, one for "download" and one for OTG. The one to use is selected through Kconfig. NOTE: not yet working; I suspect there's a clock still turned off or something like that, since neither port responds. Signed-off-by: David Brownell Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 21 ++++++++++++++++++ arch/arm/mach-omap2/board-h4.c | 46 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 67 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 47c8b57..d4a366d 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -26,6 +26,27 @@ config MACH_OMAP_H4 depends on ARCH_OMAP2 && ARCH_OMAP24XX select OMAP_DEBUG_DEVICES +config MACH_OMAP_H4_OTG + bool "Use USB OTG connector, not device connector (S1.10)" + depends on MACH_OMAP_H4 + help + Set this if you've set S1.10 (on the mainboard) to use the + Mini-AB (OTG) connector and OTG transceiver with the USB0 + port, instead of the Mini-B ("download") connector with its + non-OTG transceiver. + + Note that the "download" connector can be used to bootstrap + the system from the OMAP mask ROM. Also, since this is a + development platform, you can also force the OTG port into + a non-OTG operational mode. + +config MACH_OMAP2_H4_USB1 + bool "Use USB1 port, not UART2 (S3.3)" + depends on MACH_OMAP_H4 + help + Set this if you've set SW3.3 (on the CPU card) so that the + expansion connectors receive USB1 signals instead of UART2. + config MACH_OMAP_APOLLON bool "OMAP 2420 Apollon board" depends on ARCH_OMAP2 && ARCH_OMAP24XX diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index a00cddf..8486d7e 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -277,7 +277,11 @@ static void __init omap_h4_init_irq(void) } static struct omap_uart_config h4_uart_config __initdata = { +#ifdef CONFIG_MACH_OMAP2_H4_USB1 + .enabled_uarts = ((1 << 0) | (1 << 1)), +#else .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +#endif }; static struct omap_mmc_config h4_mmc_config __initdata = { @@ -294,10 +298,44 @@ static struct omap_lcd_config h4_lcd_config __initdata = { .ctrl_name = "internal", }; +static struct omap_usb_config h4_usb_config __initdata = { +#ifdef CONFIG_MACH_OMAP2_H4_USB1 + /* NOTE: usb1 could also be used with 3 wire signaling */ + .pins[1] = 4, +#endif + +#ifdef CONFIG_MACH_OMAP_H4_OTG + /* S1.10 ON -- USB OTG port + * usb0 switched to Mini-AB port and isp1301 transceiver; + * S2.POS3 = OFF, S2.POS4 = ON ... to allow battery charging + */ + .otg = 1, + .pins[0] = 4, +#ifdef CONFIG_USB_GADGET_OMAP + /* use OTG cable, or standard A-to-MiniB */ + .hmc_mode = 0x14, /* 0:dev/otg 1:host 2:disable */ +#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + /* use OTG cable, or NONSTANDARD (B-to-MiniB) */ + .hmc_mode = 0x11, /* 0:host 1:host 2:disable */ +#endif /* XX */ + +#else + /* S1.10 OFF -- usb "download port" + * usb0 switched to Mini-B port and isp1105 transceiver; + * S2.POS3 = ON, S2.POS4 = OFF ... to enable battery charging + */ + .register_dev = 1, + .pins[0] = 3, +// .hmc_mode = 0x14, /* 0:dev 1:host 2:disable */ + .hmc_mode = 0x00, /* 0:dev|otg 1:disable 2:disable */ +#endif +}; + static struct omap_board_config_kernel h4_config[] = { { OMAP_TAG_UART, &h4_uart_config }, { OMAP_TAG_MMC, &h4_mmc_config }, { OMAP_TAG_LCD, &h4_lcd_config }, + { OMAP_TAG_USB, &h4_usb_config }, }; static void __init omap_h4_init(void) @@ -320,6 +358,14 @@ static void __init omap_h4_init(void) } #endif +#ifdef CONFIG_MACH_OMAP2_H4_USB1 + /* S3.3 controls whether these pins are for UART2 or USB1 */ + omap_cfg_reg(N14_24XX_USB1_SE0); + omap_cfg_reg(P15_24XX_USB1_DAT); + omap_cfg_reg(W20_24XX_USB1_TXEN); + omap_cfg_reg(V19_24XX_USB1_RCV); +#endif + platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices)); omap_board_config = h4_config; omap_board_config_size = ARRAY_SIZE(h4_config); -- 1.4.4.2