[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.0-next-20110802+ (wfg@bee) (gcc version 4.5.0 (GCC) ) #513 SMP Sat Aug 6 10:34:52 CST 2011 [ 0.000000] Command line: run=/home/wfg/ioless-balance_dirty_pages/test-each-fs.sh log_buf_len=8M debug sched_debug apic=debug dynamic_printk drm.debug=6 sysrq_always_enabled panic=10 unknown_nmi_panic=1 nmi_watchdog=panic,lapic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 netconsole=@:/eth0,6666@192.168.1.1/00:30:48:fe:19:95 ip=192.168.1.78:192.168.1.11:192.168.1.1:255.255.255.0:lkp-ne02:eth0:none nfsroot=192.168.1.11:/nfsroot/wfg,tcp,v3,nocto,nolock,rsize=524288,wsize=524288 rw BOOT_IMAGE=x86_64/vmlinuz [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf341000 (usable) [ 0.000000] BIOS-e820: 00000000bf341000 - 00000000bf3c2000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf3c2000 - 00000000bf3c3000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf3c3000 - 00000000bf3d4000 (reserved) [ 0.000000] BIOS-e820: 00000000bf3d4000 - 00000000bf3d5000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf3d5000 - 00000000bf3e6000 (reserved) [ 0.000000] BIOS-e820: 00000000bf3e6000 - 00000000bf3e9000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf3e9000 - 00000000bf447000 (reserved) [ 0.000000] BIOS-e820: 00000000bf447000 - 00000000bf452000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf452000 - 00000000bf45d000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf45d000 - 00000000bf47b000 (reserved) [ 0.000000] BIOS-e820: 00000000bf47b000 - 00000000bf67e000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf67e000 - 00000000bf800000 (usable) [ 0.000000] BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 00000001c0000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Supermicro X8DTN/X8DTN, BIOS 4.6.3 03/05/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x1c0000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FE00000000 write-back [ 0.000000] 1 base 01C0000000 mask FFC0000000 uncachable [ 0.000000] 2 base 00C0000000 mask FFC0000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes. [ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes. [ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [ffff8800000fdf20] fdf20 [ 0.000000] mpc: fda10-fde84 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000 [ 0.000000] 0000000000 - 00bf800000 page 4k [ 0.000000] kernel direct mapping tables up to bf800000 @ bed41000-bf341000 [ 0.000000] init_memory_mapping: 0000000100000000-00000001c0000000 [ 0.000000] 0100000000 - 01c0000000 page 4k [ 0.000000] kernel direct mapping tables up to 1c0000000 @ 1bf1f8000-1c0000000 [ 0.000000] log_buf_len: 8388608 [ 0.000000] early log buf free: 257462(98%) [ 0.000000] ACPI: RSDP 00000000000f03f0 00024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 00000000bf450e18 0007C (v01 ALASKA A M I 06222004 MSFT 00010013) [ 0.000000] ACPI: FACP 00000000bf44fd98 000F4 (v04 ALASKA A M I 06222004 MSFT 00010013) [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110623/tbfadt-369) [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBF459F40/0x00000000BF45AE40, using 32 (20110623/tbfadt-489) [ 0.000000] ACPI: DSDT 00000000bf448018 069B4 (v01 ALASKA A M I 00000001 INTL 20051117) [ 0.000000] ACPI: FACS 00000000bf459f40 00040 [ 0.000000] ACPI: APIC 00000000bf44fc18 000E4 (v02 ALASKA A M I 06222004 MSFT 00010013) [ 0.000000] ACPI: MCFG 00000000bf451f18 0003C (v01 A M I OEMMCFG 06222004 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000bf447c18 003B0 (v01 A M I AMI SRAT 00000000 AMI. 00000000) [ 0.000000] ACPI: SLIT 00000000bf451e98 00030 (v01 A M I AMI SLIT 00000000 AMI. 00000000) [ 0.000000] ACPI: HPET 00000000bf451e18 00038 (v01 A M I ICH7HPET 06222004 AMI. 00000003) [ 0.000000] ACPI: EINJ 00000000bf44fa98 00130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.000000] ACPI: ERST 00000000bf3c2c98 00210 (v01 AMIER AMI ERST 00000000 00000000) [ 0.000000] ACPI: HEST 00000000bf3c2f18 000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.000000] ACPI: BERT 00000000bf451d98 00030 (v01 AMI AMI BERT 00000000 00000000) [ 0.000000] ACPI: DMAR 00000000bf450d18 000C0 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fb000 ( fee00000) [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x06 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x07 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x10 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x11 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x12 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x13 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x14 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x15 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x16 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x17 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 0-c0000000 [ 0.000000] SRAT: Node 1 PXM 1 100000000-1c0000000 [ 0.000000] NUMA: Initialized distance table, cnt=2 [ 0.000000] Initmem setup node 0 0000000000000000-00000000c0000000 [ 0.000000] NODE_DATA [00000000bf7fb000 - 00000000bf7fffff] [ 0.000000] Initmem setup node 1 0000000100000000-00000001c0000000 [ 0.000000] NODE_DATA [00000001bf1f3000 - 00000001bf1f7fff] [ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bbc00000-ffff8800bebfffff] on node 0 [ 0.000000] [ffffea0004000000-ffffea0006ffffff] PMD -> [ffff8801bb800000-ffff8801be7fffff] on node 1 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x001c0000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000bf341 [ 0.000000] 0: 0x000bf67e -> 0x000bf800 [ 0.000000] 1: 0x00100000 -> 0x001c0000 [ 0.000000] On node 0 totalpages: 783440 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3912 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12192 pages used for memmap [ 0.000000] DMA32 zone: 767267 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 786432 [ 0.000000] Normal zone: 12288 pages used for memmap [ 0.000000] Normal zone: 774144 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fb000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x16] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x17] enabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec02000] gsi_base[48]) [ 0.000000] IOAPIC[2]: apic_id 3, version 32, address 0xfec02000, GSI 48-71 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 16 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff5fa000 (fec00000) [ 0.000000] mapped IOAPIC to ffffffffff5f9000 (fec01000) [ 0.000000] mapped IOAPIC to ffffffffff5f8000 (fec02000) [ 0.000000] nr_irqs_gsi: 88 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf341000 - 00000000bf3c2000 [ 0.000000] PM: Registered nosave memory: 00000000bf3c2000 - 00000000bf3c3000 [ 0.000000] PM: Registered nosave memory: 00000000bf3c3000 - 00000000bf3d4000 [ 0.000000] PM: Registered nosave memory: 00000000bf3d4000 - 00000000bf3d5000 [ 0.000000] PM: Registered nosave memory: 00000000bf3d5000 - 00000000bf3e6000 [ 0.000000] PM: Registered nosave memory: 00000000bf3e6000 - 00000000bf3e9000 [ 0.000000] PM: Registered nosave memory: 00000000bf3e9000 - 00000000bf447000 [ 0.000000] PM: Registered nosave memory: 00000000bf447000 - 00000000bf452000 [ 0.000000] PM: Registered nosave memory: 00000000bf452000 - 00000000bf45d000 [ 0.000000] PM: Registered nosave memory: 00000000bf45d000 - 00000000bf47b000 [ 0.000000] PM: Registered nosave memory: 00000000bf47b000 - 00000000bf67e000 [ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ed1c000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:2 [ 0.000000] PERCPU: Embedded 475 pages/cpu @ffff8800bac00000 s1915520 r8192 d21888 u2097152 [ 0.000000] pcpu-alloc: s1915520 r8192 d21888 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 08 [0] 09 [0] 10 [0] 11 [ 0.000000] pcpu-alloc: [1] 04 [1] 05 [1] 06 [1] 07 [1] 12 [1] 13 [1] 14 [1] 15 [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1545323 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: run=/home/wfg/ioless-balance_dirty_pages/test-each-fs.sh log_buf_len=8M debug sched_debug apic=debug dynamic_printk drm.debug=6 sysrq_always_enabled panic=10 unknown_nmi_panic=1 nmi_watchdog=panic,lapic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 netconsole=@:/eth0,6666@192.168.1.1/00:30:48:fe:19:95 ip=192.168.1.78:192.168.1.11:192.168.1.1:255.255.255.0:lkp-ne02:eth0:none nfsroot=192.168.1.11:/nfsroot/wfg,tcp,v3,nocto,nolock,rsize=524288,wsize=524288 rw BOOT_IMAGE=x86_64/vmlinuz [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 6036504k/7340032k available (9615k kernel code, 1060544k absent, 242984k reserved, 5709k data, 2752k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=2 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] NR_IRQS:4352 nr_irqs:1624 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 6335 kB [ 0.000000] per task-struct memory footprint: 2688 bytes [ 0.000000] allocated 50331648 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.001000] Fast TSC calibration using PIT [ 0.002000] Detected 2666.784 MHz processor. [ 0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.56 BogoMIPS (lpj=2666784) [ 0.011151] pid_max: default: 32768 minimum: 301 [ 0.018049] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.028269] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.036356] Mount-cache hash table entries: 256 [ 0.041671] Initializing cgroup subsys debug [ 0.046225] Initializing cgroup subsys cpuacct [ 0.050934] Initializing cgroup subsys memory [ 0.055602] Initializing cgroup subsys devices [ 0.060305] Initializing cgroup subsys freezer [ 0.065007] Initializing cgroup subsys blkio [ 0.069617] CPU: Physical Processor ID: 0 [ 0.073894] CPU: Processor Core ID: 0 [ 0.077819] mce: CPU supports 9 MCE banks [ 0.082104] CPU0: Thermal monitoring enabled (TM1) [ 0.087164] using mwait in idle threads. [ 0.092354] ACPI: Core revision 20110623 [ 0.106688] ftrace: allocating 36660 entries in 144 pages [ 0.122151] Getting VERSION: 60015 [ 0.125820] Getting VERSION: 60015 [ 0.129483] Getting ID: 0 [ 0.132363] Getting ID: 0 [ 0.135251] Switched APIC routing to physical flat. [ 0.140386] enabled ExtINT on CPU#0 [ 0.144459] ENABLING IO-APIC IRQs [ 0.148034] init IO_APIC IRQs [ 0.151267] apic 0 pin 0 not connected [ 0.155372] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:0) [ 0.163755] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0) [ 0.172141] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:0) [ 0.180520] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:0) [ 0.188897] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:0 Active:0 Dest:0) [ 0.197273] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:0) [ 0.205650] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:0) [ 0.214026] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:0) [ 0.222403] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:0) [ 0.230778] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:0 Active:0 Dest:0) [ 0.239329] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:0 Active:0 Dest:0) [ 0.247877] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:0) [ 0.256426] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:0) [ 0.264976] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:0) [ 0.273525] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:0) [ 0.282072] apic 0 pin 16 not connected [ 0.286254] apic 0 pin 17 not connected [ 0.290429] apic 0 pin 18 not connected [ 0.301016] apic 0 pin 19 not connected [ 0.305192] apic 0 pin 20 not connected [ 0.309368] apic 0 pin 21 not connected [ 0.313544] apic 0 pin 22 not connected [ 0.317720] apic 0 pin 23 not connected [ 0.321900] apic 2 pin 0 not connected [ 0.325991] apic 2 pin 1 not connected [ 0.330080] apic 2 pin 2 not connected [ 0.334169] apic 2 pin 3 not connected [ 0.338257] apic 2 pin 4 not connected [ 0.342347] apic 2 pin 5 not connected [ 0.346436] apic 2 pin 6 not connected [ 0.350525] apic 2 pin 7 not connected [ 0.354612] apic 2 pin 8 not connected [ 0.358701] apic 2 pin 9 not connected [ 0.362790] apic 2 pin 10 not connected [ 0.366966] apic 2 pin 11 not connected [ 0.371142] apic 2 pin 12 not connected [ 0.375317] apic 2 pin 13 not connected [ 0.379491] apic 2 pin 14 not connected [ 0.383666] apic 2 pin 15 not connected [ 0.387842] apic 2 pin 16 not connected [ 0.392016] apic 2 pin 17 not connected [ 0.396192] apic 2 pin 18 not connected [ 0.400367] apic 2 pin 19 not connected [ 0.404543] apic 2 pin 20 not connected [ 0.408718] apic 2 pin 21 not connected [ 0.412892] apic 2 pin 22 not connected [ 0.417068] apic 2 pin 23 not connected [ 0.421244] apic 3 pin 0 not connected [ 0.425333] apic 3 pin 1 not connected [ 0.429421] apic 3 pin 2 not connected [ 0.433510] apic 3 pin 3 not connected [ 0.437599] apic 3 pin 4 not connected [ 0.441689] apic 3 pin 5 not connected [ 0.445777] apic 3 pin 6 not connected [ 0.449866] apic 3 pin 7 not connected [ 0.453955] apic 3 pin 8 not connected [ 0.458042] apic 3 pin 9 not connected [ 0.462131] apic 3 pin 10 not connected [ 0.466307] apic 3 pin 11 not connected [ 0.470482] apic 3 pin 12 not connected [ 0.474658] apic 3 pin 13 not connected [ 0.478832] apic 3 pin 14 not connected [ 0.483009] apic 3 pin 15 not connected [ 0.487183] apic 3 pin 16 not connected [ 0.491359] apic 3 pin 17 not connected [ 0.495534] apic 3 pin 18 not connected [ 0.499710] apic 3 pin 19 not connected [ 0.503883] apic 3 pin 20 not connected [ 0.508059] apic 3 pin 21 not connected [ 0.512236] apic 3 pin 22 not connected [ 0.516409] apic 3 pin 23 not connected [ 0.520717] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.536949] CPU0: Genuine Intel(R) CPU 000 @ 2.67GHz stepping 04 [ 0.544461] Using local APIC timer interrupts. [ 0.544462] calibrating APIC timer ... [ 0.654613] ... lapic delta = 833352 [ 0.658444] ... PM-Timer delta = 357950 [ 0.662533] ... PM-Timer result ok [ 0.666188] ..... delta 833352 [ 0.669491] ..... mult: 35797637 [ 0.672973] ..... calibration result: 133336 [ 0.677495] ..... CPU clock speed is 2666.0722 MHz. [ 0.682622] ..... host bus clock speed is 133.0336 MHz. [ 0.688101] Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver. [ 0.698462] ... version: 3 [ 0.702721] ... bit width: 48 [ 0.707071] ... generic registers: 4 [ 0.711333] ... value mask: 0000ffffffffffff [ 0.716900] ... max period: 000000007fffffff [ 0.722465] ... fixed-purpose events: 3 [ 0.726727] ... event mask: 000000070000000f [ 0.732656] lockdep: fixing up alternatives. [ 0.737251] Booting Node 0, Processors #1 [ 0.741455] smpboot cpu 1: start_ip = 98000 [ 0.757427] masked ExtINT on CPU#1 [ 0.839972] lockdep: fixing up alternatives. [ 0.844525] #2 [ 0.846152] smpboot cpu 2: start_ip = 98000 [ 0.862116] masked ExtINT on CPU#2 [ 0.944642] lockdep: fixing up alternatives. [ 0.949195] #3 [ 0.950817] smpboot cpu 3: start_ip = 98000 [ 0.966782] masked ExtINT on CPU#3 [ 1.049316] lockdep: fixing up alternatives. [ 1.053872] Ok. [ 1.055969] Booting Node 1, Processors #4 [ 1.060178] smpboot cpu 4: start_ip = 98000 [ 1.076141] masked ExtINT on CPU#4 [ 1.159044] lockdep: fixing up alternatives. [ 1.163586] #5 [ 1.165216] smpboot cpu 5: start_ip = 98000 [ 1.181181] masked ExtINT on CPU#5 [ 1.263678] lockdep: fixing up alternatives. [ 1.268221] #6 [ 1.269849] smpboot cpu 6: start_ip = 98000 [ 1.285822] masked ExtINT on CPU#6 [ 1.368438] lockdep: fixing up alternatives. [ 1.372981] #7 [ 1.374609] smpboot cpu 7: start_ip = 98000 [ 1.390574] masked ExtINT on CPU#7 [ 1.473178] lockdep: fixing up alternatives. [ 1.477725] Ok. [ 1.479821] Booting Node 0, Processors #8 [ 1.484031] smpboot cpu 8: start_ip = 98000 [ 1.499994] masked ExtINT on CPU#8 [ 1.582910] lockdep: fixing up alternatives. [ 1.587465] #9 [ 1.589095] smpboot cpu 9: start_ip = 98000 [ 1.605079] masked ExtINT on CPU#9 [ 1.687630] lockdep: fixing up alternatives. [ 1.692180] #10 [ 1.693890] smpboot cpu 10: start_ip = 98000 [ 1.709941] masked ExtINT on CPU#10 [ 1.793280] lockdep: fixing up alternatives. [ 1.797832] #11 [ 1.799542] smpboot cpu 11: start_ip = 98000 [ 1.815594] masked ExtINT on CPU#11 [ 1.898943] lockdep: fixing up alternatives. [ 1.903496] Ok. [ 1.905593] Booting Node 1, Processors #12 [ 1.909888] smpboot cpu 12: start_ip = 98000 [ 1.925939] masked ExtINT on CPU#12 [ 2.008664] lockdep: fixing up alternatives. [ 2.013211] #13 [ 2.014928] smpboot cpu 13: start_ip = 98000 [ 2.030988] masked ExtINT on CPU#13 [ 2.114413] lockdep: fixing up alternatives. [ 2.118957] #14 [ 2.120675] smpboot cpu 14: start_ip = 98000 [ 2.136733] masked ExtINT on CPU#14 [ 2.220061] lockdep: fixing up alternatives. [ 2.224616] #15 Ok. [ 2.227062] smpboot cpu 15: start_ip = 98000 [ 2.242672] masked ExtINT on CPU#15 [ 2.325642] Brought up 16 CPUs [ 2.328954] Total of 16 processors activated (85321.71 BogoMIPS). [ 2.343310] CPU0 attaching sched-domain: [ 2.347499] domain 0: span 0,8 level SIBLING [ 2.352178] groups: 0 (cpu_power = 589) 8 (cpu_power = 589) [ 2.358516] domain 1: span 0-3,8-11 level MC [ 2.363278] groups: 0,8 (cpu_power = 1178) 1,9 (cpu_power = 1178) 2,10 (cpu_power = 1178) 3,11 (cpu_power = 1178) [ 2.374847] domain 2: span 0-15 level NODE [ 2.379530] groups: 0-3,8-11 (cpu_power = 4712) 4-7,12-15 (cpu_power = 4712) [ 2.387713] CPU1 attaching sched-domain: [ 2.391893] domain 0: span 1,9 level SIBLING [ 2.396567] groups: 1 (cpu_power = 589) 9 (cpu_power = 589) [ 2.402894] domain 1: span 0-3,8-11 level MC [ 2.407662] groups: 1,9 (cpu_power = 1178) 2,10 (cpu_power = 1178) 3,11 (cpu_power = 1178) 0,8 (cpu_power = 1178) [ 2.419239] domain 2: span 0-15 level NODE [ 2.423918] groups: 0-3,8-11 (cpu_power = 4712) 4-7,12-15 (cpu_power = 4712) [ 2.432105] CPU2 attaching sched-domain: [ 2.436281] domain 0: span 2,10 level SIBLING [ 2.441044] groups: 2 (cpu_power = 589) 10 (cpu_power = 589) [ 2.447459] domain 1: span 0-3,8-11 level MC [ 2.452222] groups: 2,10 (cpu_power = 1178) 3,11 (cpu_power = 1178) 0,8 (cpu_power = 1178) 1,9 (cpu_power = 1178) [ 2.463794] domain 2: span 0-15 level NODE [ 2.468473] groups: 0-3,8-11 (cpu_power = 4712) 4-7,12-15 (cpu_power = 4712) [ 2.476657] CPU3 attaching sched-domain: [ 2.480835] domain 0: span 3,11 level SIBLING [ 2.485597] groups: 3 (cpu_power = 589) 11 (cpu_power = 589) [ 2.492009] domain 1: span 0-3,8-11 level MC [ 2.496774] groups: 3,11 (cpu_power = 1178) 0,8 (cpu_power = 1178) 1,9 (cpu_power = 1178) 2,10 (cpu_power = 1178) [ 2.508342] domain 2: span 0-15 level NODE [ 2.513020] groups: 0-3,8-11 (cpu_power = 4712) 4-7,12-15 (cpu_power = 4712) [ 2.521224] CPU4 attaching sched-domain: [ 2.525406] domain 0: span 4,12 level SIBLING [ 2.530167] groups: 4 (cpu_power = 589) 12 (cpu_power = 589) [ 2.536578] domain 1: span 4-7,12-15 level MC [ 2.541430] groups: 4,12 (cpu_power = 1178) 5,13 (cpu_power = 1178) 6,14 (cpu_power = 1178) 7,15 (cpu_power = 1178) [ 2.553172] domain 2: span 0-15 level NODE [ 2.557846] groups: 4-7,12-15 (cpu_power = 4712) 0-3,8-11 (cpu_power = 4712) [ 2.566036] CPU5 attaching sched-domain: [ 2.570220] domain 0: span 5,13 level SIBLING [ 2.574989] groups: 5 (cpu_power = 589) 13 (cpu_power = 589) [ 2.581401] domain 1: span 4-7,12-15 level MC [ 2.586251] groups: 5,13 (cpu_power = 1178) 6,14 (cpu_power = 1178) 7,15 (cpu_power = 1178) 4,12 (cpu_power = 1178) [ 2.597996] domain 2: span 0-15 level NODE [ 2.602676] groups: 4-7,12-15 (cpu_power = 4712) 0-3,8-11 (cpu_power = 4712) [ 2.610868] CPU6 attaching sched-domain: [ 2.615047] domain 0: span 6,14 level SIBLING [ 2.626217] groups: 6 (cpu_power = 589) 14 (cpu_power = 589) [ 2.632626] domain 1: span 4-7,12-15 level MC [ 2.637482] groups: 6,14 (cpu_power = 1178) 7,15 (cpu_power = 1178) 4,12 (cpu_power = 1178) 5,13 (cpu_power = 1178) [ 2.649224] domain 2: span 0-15 level NODE [ 2.653906] groups: 4-7,12-15 (cpu_power = 4712) 0-3,8-11 (cpu_power = 4712) [ 2.662099] CPU7 attaching sched-domain: [ 2.666274] domain 0: span 7,15 level SIBLING [ 2.671040] groups: 7 (cpu_power = 589) 15 (cpu_power = 589) [ 2.677449] domain 1: span 4-7,12-15 level MC [ 2.682300] groups: 7,15 (cpu_power = 1178) 4,12 (cpu_power = 1178) 5,13 (cpu_power = 1178) 6,14 (cpu_power = 1178) [ 2.694045] domain 2: span 0-15 level NODE [ 2.698726] groups: 4-7,12-15 (cpu_power = 4712) 0-3,8-11 (cpu_power = 4712) [ 2.706922] CPU8 attaching sched-domain: [ 2.711095] domain 0: span 0,8 level SIBLING [ 2.715773] groups: 8 (cpu_power = 589) 0 (cpu_power = 589) [ 2.722095] domain 1: span 0-3,8-11 level MC [ 2.726863] groups: 0,8 (cpu_power = 1178) 1,9 (cpu_power = 1178) 2,10 (cpu_power = 1178) 3,11 (cpu_power = 1178) [ 2.738437] domain 2: span 0-15 level NODE [ 2.743117] groups: 0-3,8-11 (cpu_power = 4712) 4-7,12-15 (cpu_power = 4712) [ 2.751316] CPU9 attaching sched-domain: [ 2.755494] domain 0: span 1,9 level SIBLING [ 2.760169] groups: 9 (cpu_power = 589) 1 (cpu_power = 589) [ 2.766506] domain 1: span 0-3,8-11 level MC [ 2.771268] groups: 1,9 (cpu_power = 1178) 2,10 (cpu_power = 1178) 3,11 (cpu_power = 1178) 0,8 (cpu_power = 1178) [ 2.782841] domain 2: span 0-15 level NODE [ 2.787523] groups: 0-3,8-11 (cpu_power = 4712) 4-7,12-15 (cpu_power = 4712) [ 2.795722] CPU10 attaching sched-domain: [ 2.799986] domain 0: span 2,10 level SIBLING [ 2.804748] groups: 10 (cpu_power = 589) 2 (cpu_power = 589) [ 2.811169] domain 1: span 0-3,8-11 level MC [ 2.815935] groups: 2,10 (cpu_power = 1178) 3,11 (cpu_power = 1178) 0,8 (cpu_power = 1178) 1,9 (cpu_power = 1178) [ 2.827500] domain 2: span 0-15 level NODE [ 2.832181] groups: 0-3,8-11 (cpu_power = 4712) 4-7,12-15 (cpu_power = 4712) [ 2.840375] CPU11 attaching sched-domain: [ 2.844642] domain 0: span 3,11 level SIBLING [ 2.849404] groups: 11 (cpu_power = 589) 3 (cpu_power = 589) [ 2.855826] domain 1: span 0-3,8-11 level MC [ 2.860591] groups: 3,11 (cpu_power = 1178) 0,8 (cpu_power = 1178) 1,9 (cpu_power = 1178) 2,10 (cpu_power = 1178) [ 2.872157] domain 2: span 0-15 level NODE [ 2.876837] groups: 0-3,8-11 (cpu_power = 4712) 4-7,12-15 (cpu_power = 4712) [ 2.885040] CPU12 attaching sched-domain: [ 2.889308] domain 0: span 4,12 level SIBLING [ 2.894074] groups: 12 (cpu_power = 589) 4 (cpu_power = 589) [ 2.900492] domain 1: span 4-7,12-15 level MC [ 2.905344] groups: 4,12 (cpu_power = 1178) 5,13 (cpu_power = 1178) 6,14 (cpu_power = 1178) 7,15 (cpu_power = 1178) [ 2.917084] domain 2: span 0-15 level NODE [ 2.921768] groups: 4-7,12-15 (cpu_power = 4712) 0-3,8-11 (cpu_power = 4712) [ 2.929964] CPU13 attaching sched-domain: [ 2.934232] domain 0: span 5,13 level SIBLING [ 2.938999] groups: 13 (cpu_power = 589) 5 (cpu_power = 589) [ 2.945416] domain 1: span 4-7,12-15 level MC [ 2.950267] groups: 5,13 (cpu_power = 1178) 6,14 (cpu_power = 1178) 7,15 (cpu_power = 1178) 4,12 (cpu_power = 1178) [ 2.962008] domain 2: span 0-15 level NODE [ 2.966686] groups: 4-7,12-15 (cpu_power = 4712) 0-3,8-11 (cpu_power = 4712) [ 2.974873] CPU14 attaching sched-domain: [ 2.979131] domain 0: span 6,14 level SIBLING [ 2.983896] groups: 14 (cpu_power = 589) 6 (cpu_power = 589) [ 2.990314] domain 1: span 4-7,12-15 level MC [ 2.995168] groups: 6,14 (cpu_power = 1178) 7,15 (cpu_power = 1178) 4,12 (cpu_power = 1178) 5,13 (cpu_power = 1178) [ 3.006906] domain 2: span 0-15 level NODE [ 3.011583] groups: 4-7,12-15 (cpu_power = 4712) 0-3,8-11 (cpu_power = 4712) [ 3.019772] CPU15 attaching sched-domain: [ 3.024042] domain 0: span 7,15 level SIBLING [ 3.028812] groups: 15 (cpu_power = 589) 7 (cpu_power = 589) [ 3.035222] domain 1: span 4-7,12-15 level MC [ 3.040075] groups: 7,15 (cpu_power = 1178) 4,12 (cpu_power = 1178) 5,13 (cpu_power = 1178) 6,14 (cpu_power = 1178) [ 3.051816] domain 2: span 0-15 level NODE [ 3.056491] groups: 4-7,12-15 (cpu_power = 4712) 0-3,8-11 (cpu_power = 4712) [ 3.065606] devtmpfs: initialized [ 3.069448] kworker/u:0 used greatest stack depth: 5608 bytes left [ 3.075885] kworker/u:0 used greatest stack depth: 5192 bytes left [ 3.086262] PM: Registering ACPI NVS region at bf341000 (528384 bytes) [ 3.093060] PM: Registering ACPI NVS region at bf3d4000 (4096 bytes) [ 3.099661] PM: Registering ACPI NVS region at bf3e6000 (12288 bytes) [ 3.106361] PM: Registering ACPI NVS region at bf452000 (45056 bytes) [ 3.113054] PM: Registering ACPI NVS region at bf47b000 (2109440 bytes) [ 3.120781] xor: automatically using best checksumming function: generic_sse [ 3.132496] generic_sse: 9940.000 MB/sec [ 3.137022] xor: using function: generic_sse (9940.000 MB/sec) [ 3.143225] RTC time: 15:00:24, date: 08/06/11 [ 3.148046] NET: Registered protocol family 16 [ 3.153882] ACPI: bus type pci registered [ 3.158451] dca service started, version 1.12.1 [ 3.163359] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) [ 3.173124] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820 [ 3.244160] PCI: Using configuration type 1 for base access [ 3.287421] bio: create slab at 0 [ 3.308828] raid6: int64x1 2640 MB/s [ 3.329762] raid6: int64x2 2703 MB/s [ 3.350702] raid6: int64x4 2281 MB/s [ 3.371659] raid6: int64x8 1742 MB/s [ 3.392584] raid6: sse2x1 6523 MB/s [ 3.413528] raid6: sse2x2 7613 MB/s [ 3.434467] raid6: sse2x4 8820 MB/s [ 3.438469] raid6: using algorithm sse2x4 (8820 MB/s) [ 3.443894] ACPI: Added _OSI(Module Device) [ 3.448340] ACPI: Added _OSI(Processor Device) [ 3.453037] ACPI: Added _OSI(3.0 _SCP Extensions) [ 3.457998] ACPI: Added _OSI(Processor Aggregator Device) [ 3.468372] ACPI: EC: Look up EC in DSDT [ 3.473582] \_SB_:_OSC evaluation returned wrong type [ 3.478882] _OSC request data:1 6 [ 3.487296] ACPI: Executed 1 blocks of module-level executable AML code [ 3.505415] ACPI: SSDT 00000000bf453018 01054 (v01 AMI IST 00000001 MSFT 03000001) [ 3.516456] ACPI: Dynamic OEM Table Load: [ 3.520847] ACPI: SSDT (null) 01054 (v01 AMI IST 00000001 MSFT 03000001) [ 3.535535] ACPI: Interpreter enabled [ 3.539455] ACPI: (supports S0 S4 S5) [ 3.543599] ACPI: Using IOAPIC for interrupt routing [ 3.551638] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 3.580310] ACPI: No dock devices found. [ 3.584494] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 3.594429] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 3.601189] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 3.608059] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 3.614921] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 3.622690] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff] [ 3.630492] pci 0000:00:00.0: [8086:3400] type 0 class 0x000600 [ 3.636733] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 3.643077] pci 0000:00:00.0: PME# disabled [ 3.647544] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604 [ 3.653780] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 3.660124] pci 0000:00:01.0: PME# disabled [ 3.664591] pci 0000:00:02.0: [8086:3409] type 1 class 0x000604 [ 3.670825] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 3.677169] pci 0000:00:02.0: PME# disabled [ 3.681637] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604 [ 3.687876] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 3.694217] pci 0000:00:03.0: PME# disabled [ 3.698682] pci 0000:00:04.0: [8086:340b] type 1 class 0x000604 [ 3.704919] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 3.711262] pci 0000:00:04.0: PME# disabled [ 3.715720] pci 0000:00:05.0: [8086:340c] type 1 class 0x000604 [ 3.721949] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 3.728292] pci 0000:00:05.0: PME# disabled [ 3.732752] pci 0000:00:06.0: [8086:340d] type 1 class 0x000604 [ 3.738987] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 3.745330] pci 0000:00:06.0: PME# disabled [ 3.749789] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604 [ 3.756026] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 3.762369] pci 0000:00:07.0: PME# disabled [ 3.766826] pci 0000:00:08.0: [8086:340f] type 1 class 0x000604 [ 3.773066] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold [ 3.779407] pci 0000:00:08.0: PME# disabled [ 3.783865] pci 0000:00:09.0: [8086:3410] type 1 class 0x000604 [ 3.790103] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 3.796446] pci 0000:00:09.0: PME# disabled [ 3.800918] pci 0000:00:0a.0: [8086:3411] type 1 class 0x000604 [ 3.807148] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 3.813491] pci 0000:00:0a.0: PME# disabled [ 3.817956] pci 0000:00:13.0: [8086:342d] type 0 class 0x000800 [ 3.824136] pci 0000:00:13.0: reg 10: [mem 0xfbf03000-0xfbf03fff] [ 3.830538] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 3.836883] pci 0000:00:13.0: PME# disabled [ 3.847770] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800 [ 3.854022] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800 [ 3.860272] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800 [ 3.866534] pci 0000:00:14.3: [8086:3438] type 0 class 0x000800 [ 3.872790] pci 0000:00:16.0: [8086:3430] type 0 class 0x000880 [ 3.878969] pci 0000:00:16.0: reg 10: [mem 0xfffff1c000-0xfffff1ffff 64bit] [ 3.886266] pci 0000:00:16.1: [8086:3431] type 0 class 0x000880 [ 3.892445] pci 0000:00:16.1: reg 10: [mem 0xfffff18000-0xfffff1bfff 64bit] [ 3.899743] pci 0000:00:16.2: [8086:3432] type 0 class 0x000880 [ 3.905932] pci 0000:00:16.2: reg 10: [mem 0xfffff14000-0xfffff17fff 64bit] [ 3.913228] pci 0000:00:16.3: [8086:3433] type 0 class 0x000880 [ 3.919417] pci 0000:00:16.3: reg 10: [mem 0xfffff10000-0xfffff13fff 64bit] [ 3.926715] pci 0000:00:16.4: [8086:3429] type 0 class 0x000880 [ 3.932901] pci 0000:00:16.4: reg 10: [mem 0xfffff0c000-0xfffff0ffff 64bit] [ 3.940198] pci 0000:00:16.5: [8086:342a] type 0 class 0x000880 [ 3.946377] pci 0000:00:16.5: reg 10: [mem 0xfffff08000-0xfffff0bfff 64bit] [ 3.953676] pci 0000:00:16.6: [8086:342b] type 0 class 0x000880 [ 3.959863] pci 0000:00:16.6: reg 10: [mem 0xfffff04000-0xfffff07fff 64bit] [ 3.967160] pci 0000:00:16.7: [8086:342c] type 0 class 0x000880 [ 3.973349] pci 0000:00:16.7: reg 10: [mem 0xfffff00000-0xfffff03fff 64bit] [ 3.980651] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03 [ 3.986875] pci 0000:00:1a.0: reg 20: [io 0xf0c0-0xf0df] [ 3.992583] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03 [ 3.998803] pci 0000:00:1a.2: reg 20: [io 0xf0a0-0xf0bf] [ 4.004527] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03 [ 4.010721] pci 0000:00:1a.7: reg 10: [mem 0xfbf02000-0xfbf023ff] [ 4.017160] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 4.023508] pci 0000:00:1a.7: PME# disabled [ 4.027974] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604 [ 4.034222] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 4.040572] pci 0000:00:1c.0: PME# disabled [ 4.045043] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604 [ 4.051291] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 4.057636] pci 0000:00:1c.4: PME# disabled [ 4.062099] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03 [ 4.068322] pci 0000:00:1d.0: reg 20: [io 0xf080-0xf09f] [ 4.074029] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03 [ 4.080251] pci 0000:00:1d.1: reg 20: [io 0xf060-0xf07f] [ 4.085959] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03 [ 4.092190] pci 0000:00:1d.2: reg 20: [io 0xf040-0xf05f] [ 4.097908] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03 [ 4.104108] pci 0000:00:1d.7: reg 10: [mem 0xfbf01000-0xfbf013ff] [ 4.110547] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 4.116895] pci 0000:00:1d.7: PME# disabled [ 4.121357] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 4.127598] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601 [ 4.133866] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0600 (mask 00ff) [ 4.141893] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 001f) [ 4.149923] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0ca0 (mask 000f) [ 4.157999] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106 [ 4.164191] pci 0000:00:1f.2: reg 10: [io 0xf110-0xf117] [ 4.169847] pci 0000:00:1f.2: reg 14: [io 0xf100-0xf103] [ 4.175508] pci 0000:00:1f.2: reg 18: [io 0xf0f0-0xf0f7] [ 4.181162] pci 0000:00:1f.2: reg 1c: [io 0xf0e0-0xf0e3] [ 4.186826] pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f] [ 4.192487] pci 0000:00:1f.2: reg 24: [mem 0xfbf00000-0xfbf007ff] [ 4.198877] pci 0000:00:1f.2: PME# supported from D3hot [ 4.204357] pci 0000:00:1f.2: PME# disabled [ 4.208812] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05 [ 4.214996] pci 0000:00:1f.3: reg 10: [mem 0xfffff20000-0xfffff200ff 64bit] [ 4.222233] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f] [ 4.227989] pci 0000:01:00.0: [8086:10c9] type 0 class 0x000200 [ 4.234175] pci 0000:01:00.0: reg 10: [mem 0xfb9a0000-0xfb9bffff] [ 4.240525] pci 0000:01:00.0: reg 14: [mem 0xfb980000-0xfb99ffff] [ 4.246878] pci 0000:01:00.0: reg 18: [io 0xe020-0xe03f] [ 4.252531] pci 0000:01:00.0: reg 1c: [mem 0xfba44000-0xfba47fff] [ 4.258906] pci 0000:01:00.0: reg 30: [mem 0xfb960000-0xfb97ffff pref] [ 4.265715] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 4.272061] pci 0000:01:00.0: PME# disabled [ 4.276538] pci 0000:01:00.1: [8086:10c9] type 0 class 0x000200 [ 4.282722] pci 0000:01:00.1: reg 10: [mem 0xfb940000-0xfb95ffff] [ 4.289070] pci 0000:01:00.1: reg 14: [mem 0xfb920000-0xfb93ffff] [ 4.295426] pci 0000:01:00.1: reg 18: [io 0xe000-0xe01f] [ 4.301086] pci 0000:01:00.1: reg 1c: [mem 0xfba40000-0xfba43fff] [ 4.307461] pci 0000:01:00.1: reg 30: [mem 0xfb900000-0xfb91ffff pref] [ 4.314270] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 4.320619] pci 0000:01:00.1: PME# disabled [ 4.325076] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 4.330558] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 4.336902] pci 0000:00:01.0: bridge window [mem 0xfb900000-0xfbafffff] [ 4.343991] pci 0000:00:02.0: PCI bridge to [bus 03-03] [ 4.349611] pci 0000:04:00.0: [8086:10f1] type 0 class 0x000200 [ 4.355860] pci 0000:04:00.0: reg 10: [mem 0xfbea0000-0xfbebffff] [ 4.362277] pci 0000:04:00.0: reg 14: [mem 0xfbe40000-0xfbe7ffff] [ 4.368701] pci 0000:04:00.0: reg 18: [io 0xd020-0xd03f] [ 4.374423] pci 0000:04:00.0: reg 1c: [mem 0xfbec4000-0xfbec7fff] [ 4.380897] pci 0000:04:00.0: PME# supported from D0 D3hot [ 4.386700] pci 0000:04:00.0: PME# disabled [ 4.391236] pci 0000:04:00.1: [8086:10f1] type 0 class 0x000200 [ 4.397481] pci 0000:04:00.1: reg 10: [mem 0xfbe80000-0xfbe9ffff] [ 4.403900] pci 0000:04:00.1: reg 14: [mem 0xfbe00000-0xfbe3ffff] [ 4.410315] pci 0000:04:00.1: reg 18: [io 0xd000-0xd01f] [ 4.416038] pci 0000:04:00.1: reg 1c: [mem 0xfbec0000-0xfbec3fff] [ 4.422510] pci 0000:04:00.1: PME# supported from D0 D3hot [ 4.428314] pci 0000:04:00.1: PME# disabled [ 4.432839] pci 0000:00:03.0: PCI bridge to [bus 04-04] [ 4.438319] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff] [ 4.444663] pci 0000:00:03.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 4.451755] pci 0000:00:04.0: PCI bridge to [bus 05-05] [ 4.457290] pci 0000:00:05.0: PCI bridge to [bus 06-06] [ 4.462821] pci 0000:00:06.0: PCI bridge to [bus 07-07] [ 4.468354] pci 0000:00:07.0: PCI bridge to [bus 08-08] [ 4.473886] pci 0000:00:08.0: PCI bridge to [bus 09-09] [ 4.479426] pci 0000:0a:00.0: [8086:0329] type 1 class 0x000604 [ 4.485613] pci 0000:0a:00.0: PXH quirk detected; SHPC device MSI disabled [ 4.492795] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold [ 4.499140] pci 0000:0a:00.0: PME# disabled [ 4.503612] pci 0000:0a:00.2: [8086:032a] type 1 class 0x000604 [ 4.509799] pci 0000:0a:00.2: PXH quirk detected; SHPC device MSI disabled [ 4.516984] pci 0000:0a:00.2: PME# supported from D0 D3hot D3cold [ 4.523326] pci 0000:0a:00.2: PME# disabled [ 4.527779] pci 0000:00:09.0: PCI bridge to [bus 0a-0c] [ 4.533260] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] [ 4.539604] pci 0000:00:09.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 4.546732] pci 0000:0a:00.0: PCI bridge to [bus 0b-0b] [ 4.552268] pci 0000:0c:01.0: [8086:1229] type 0 class 0x000200 [ 4.558457] pci 0000:0c:01.0: reg 10: [mem 0xfbd20000-0xfbd20fff] [ 4.564815] pci 0000:0c:01.0: reg 14: [io 0xc000-0xc03f] [ 4.570472] pci 0000:0c:01.0: reg 18: [mem 0xfbd00000-0xfbd1ffff] [ 4.576879] pci 0000:0c:01.0: supports D1 D2 [ 4.581407] pci 0000:0c:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.588284] pci 0000:0c:01.0: PME# disabled [ 4.592783] pci 0000:0a:00.2: PCI bridge to [bus 0c-0c] [ 4.598257] pci 0000:0a:00.2: bridge window [io 0xc000-0xcfff] [ 4.604603] pci 0000:0a:00.2: bridge window [mem 0xfbd00000-0xfbdfffff] [ 4.611707] pci 0000:00:0a.0: PCI bridge to [bus 0d-0d] [ 4.617262] pci 0000:0e:00.0: [1000:0058] type 0 class 0x000100 [ 4.623443] pci 0000:0e:00.0: reg 10: [io 0xb000-0xb0ff] [ 4.629116] pci 0000:0e:00.0: reg 14: [mem 0xfb810000-0xfb813fff 64bit] [ 4.635998] pci 0000:0e:00.0: reg 1c: [mem 0xfb800000-0xfb80ffff 64bit] [ 4.642884] pci 0000:0e:00.0: reg 30: [mem 0xfb600000-0xfb7fffff pref] [ 4.649691] pci 0000:0e:00.0: supports D1 D2 [ 4.654237] pci 0000:00:1c.0: PCI bridge to [bus 0e-0e] [ 4.659718] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff] [ 4.666065] pci 0000:00:1c.0: bridge window [mem 0xfb600000-0xfb8fffff] [ 4.673175] pci 0000:0f:00.0: [197b:2368] type 0 class 0x000101 [ 4.679372] pci 0000:0f:00.0: reg 10: [io 0xa040-0xa047] [ 4.685033] pci 0000:0f:00.0: reg 14: [io 0xa030-0xa033] [ 4.690695] pci 0000:0f:00.0: reg 18: [io 0xa020-0xa027] [ 4.696357] pci 0000:0f:00.0: reg 1c: [io 0xa010-0xa013] [ 4.702018] pci 0000:0f:00.0: reg 20: [io 0xa000-0xa00f] [ 4.707697] pci 0000:0f:00.0: reg 30: [mem 0xfbc00000-0xfbc0ffff pref] [ 4.714535] pci 0000:00:1c.4: PCI bridge to [bus 0f-0f] [ 4.720014] pci 0000:00:1c.4: bridge window [io 0xa000-0xafff] [ 4.726358] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff] [ 4.733441] pci 0000:10:01.0: [1002:515e] type 0 class 0x000300 [ 4.739630] pci 0000:10:01.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] [ 4.746414] pci 0000:10:01.0: reg 14: [io 0x9000-0x90ff] [ 4.752075] pci 0000:10:01.0: reg 18: [mem 0xfbb20000-0xfbb2ffff] [ 4.758461] pci 0000:10:01.0: reg 30: [mem 0xfbb00000-0xfbb1ffff pref] [ 4.765266] pci 0000:10:01.0: supports D1 D2 [ 4.769855] pci 0000:00:1e.0: PCI bridge to [bus 10-10] (subtractive decode) [ 4.777152] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 4.783499] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff] [ 4.790537] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 4.798737] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 4.807111] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 4.815488] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 4.824557] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) [ 4.833690] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 4.840372] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 4.847161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 4.853856] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 4.860608] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT] [ 4.867283] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9.PXHB._PRT] [ 4.874396] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9.PXHA._PRT] [ 4.881755] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x19) [ 4.935470] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 4.943380] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15) [ 4.951306] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 4.959224] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 4.973546] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 4.981687] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 4.989838] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 4.997993] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15) [ 5.006352] vgaarb: device added: PCI:0000:10:01.0,decodes=io+mem,owns=io+mem,locks=none [ 5.014899] vgaarb: loaded [ 5.017862] vgaarb: bridge control possible 0000:10:01.0 [ 5.023753] SCSI subsystem initialized [ 5.028087] libata version 3.00 loaded. [ 5.032611] usbcore: registered new interface driver usbfs [ 5.038445] usbcore: registered new interface driver hub [ 5.044118] usbcore: registered new device driver usb [ 5.050211] wmi: Mapper loaded [ 5.053624] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 5.060231] PCI: Using ACPI for IRQ routing [ 5.071754] PCI: Discovered peer bus fe [ 5.075959] pci 0000:fe:00.0: [8086:2c40] type 0 class 0x000600 [ 5.082167] pci 0000:fe:00.1: [8086:2c01] type 0 class 0x000600 [ 5.088385] pci 0000:fe:02.0: [8086:2c10] type 0 class 0x000600 [ 5.094592] pci 0000:fe:02.1: [8086:2c11] type 0 class 0x000600 [ 5.100803] pci 0000:fe:02.4: [8086:2c14] type 0 class 0x000600 [ 5.107007] pci 0000:fe:02.5: [8086:2c15] type 0 class 0x000600 [ 5.113221] pci 0000:fe:03.0: [8086:2c18] type 0 class 0x000600 [ 5.119429] pci 0000:fe:03.1: [8086:2c19] type 0 class 0x000600 [ 5.125634] pci 0000:fe:03.2: [8086:2c1a] type 0 class 0x000600 [ 5.131842] pci 0000:fe:03.4: [8086:2c1c] type 0 class 0x000600 [ 5.138049] pci 0000:fe:04.0: [8086:2c20] type 0 class 0x000600 [ 5.144253] pci 0000:fe:04.1: [8086:2c21] type 0 class 0x000600 [ 5.150461] pci 0000:fe:04.2: [8086:2c22] type 0 class 0x000600 [ 5.156666] pci 0000:fe:04.3: [8086:2c23] type 0 class 0x000600 [ 5.162870] pci 0000:fe:05.0: [8086:2c28] type 0 class 0x000600 [ 5.169072] pci 0000:fe:05.1: [8086:2c29] type 0 class 0x000600 [ 5.175279] pci 0000:fe:05.2: [8086:2c2a] type 0 class 0x000600 [ 5.181489] pci 0000:fe:05.3: [8086:2c2b] type 0 class 0x000600 [ 5.187697] pci 0000:fe:06.0: [8086:2c30] type 0 class 0x000600 [ 5.193899] pci 0000:fe:06.1: [8086:2c31] type 0 class 0x000600 [ 5.200104] pci 0000:fe:06.2: [8086:2c32] type 0 class 0x000600 [ 5.206311] pci 0000:fe:06.3: [8086:2c33] type 0 class 0x000600 [ 5.214940] PCI: Discovered peer bus ff [ 5.219157] pci 0000:ff:00.0: [8086:2c40] type 0 class 0x000600 [ 5.225366] pci 0000:ff:00.1: [8086:2c01] type 0 class 0x000600 [ 5.231577] pci 0000:ff:02.0: [8086:2c10] type 0 class 0x000600 [ 5.237786] pci 0000:ff:02.1: [8086:2c11] type 0 class 0x000600 [ 5.243994] pci 0000:ff:02.4: [8086:2c14] type 0 class 0x000600 [ 5.250199] pci 0000:ff:02.5: [8086:2c15] type 0 class 0x000600 [ 5.256407] pci 0000:ff:03.0: [8086:2c18] type 0 class 0x000600 [ 5.262610] pci 0000:ff:03.1: [8086:2c19] type 0 class 0x000600 [ 5.268819] pci 0000:ff:03.2: [8086:2c1a] type 0 class 0x000600 [ 5.275025] pci 0000:ff:03.4: [8086:2c1c] type 0 class 0x000600 [ 5.281235] pci 0000:ff:04.0: [8086:2c20] type 0 class 0x000600 [ 5.287438] pci 0000:ff:04.1: [8086:2c21] type 0 class 0x000600 [ 5.293646] pci 0000:ff:04.2: [8086:2c22] type 0 class 0x000600 [ 5.299852] pci 0000:ff:04.3: [8086:2c23] type 0 class 0x000600 [ 5.306062] pci 0000:ff:05.0: [8086:2c28] type 0 class 0x000600 [ 5.312265] pci 0000:ff:05.1: [8086:2c29] type 0 class 0x000600 [ 5.318479] pci 0000:ff:05.2: [8086:2c2a] type 0 class 0x000600 [ 5.324691] pci 0000:ff:05.3: [8086:2c2b] type 0 class 0x000600 [ 5.330899] pci 0000:ff:06.0: [8086:2c30] type 0 class 0x000600 [ 5.337099] pci 0000:ff:06.1: [8086:2c31] type 0 class 0x000600 [ 5.343309] pci 0000:ff:06.2: [8086:2c32] type 0 class 0x000600 [ 5.349514] pci 0000:ff:06.3: [8086:2c33] type 0 class 0x000600 [ 5.358167] PCI: pci_cache_line_size set to 64 bytes [ 5.363442] pci 0000:00:16.0: no compatible bridge window for [mem 0xfffff1c000-0xfffff1ffff 64bit] [ 5.372946] pci 0000:00:16.1: no compatible bridge window for [mem 0xfffff18000-0xfffff1bfff 64bit] [ 5.382454] pci 0000:00:16.2: no compatible bridge window for [mem 0xfffff14000-0xfffff17fff 64bit] [ 5.391965] pci 0000:00:16.3: no compatible bridge window for [mem 0xfffff10000-0xfffff13fff 64bit] [ 5.401472] pci 0000:00:16.4: no compatible bridge window for [mem 0xfffff0c000-0xfffff0ffff 64bit] [ 5.410980] pci 0000:00:16.5: no compatible bridge window for [mem 0xfffff08000-0xfffff0bfff 64bit] [ 5.420490] pci 0000:00:16.6: no compatible bridge window for [mem 0xfffff04000-0xfffff07fff 64bit] [ 5.429999] pci 0000:00:16.7: no compatible bridge window for [mem 0xfffff00000-0xfffff03fff 64bit] [ 5.439543] pci 0000:00:1f.3: no compatible bridge window for [mem 0xfffff20000-0xfffff200ff 64bit] [ 5.449463] reserve RAM buffer: 000000000009d800 - 000000000009ffff [ 5.455678] reserve RAM buffer: 00000000bf341000 - 00000000bfffffff [ 5.462353] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff [ 5.469478] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 5.477221] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 5.482939] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 5.505019] Switching to clocksource hpet [ 5.509852] Switched to NOHz mode on CPU #0 [ 5.509904] Switched to NOHz mode on CPU #11 [ 5.509919] Switched to NOHz mode on CPU #3 [ 5.509941] Switched to NOHz mode on CPU #15 [ 5.509957] Switched to NOHz mode on CPU #10 [ 5.509963] Switched to NOHz mode on CPU #5 [ 5.509969] Switched to NOHz mode on CPU #14 [ 5.509973] Switched to NOHz mode on CPU #2 [ 5.509985] Switched to NOHz mode on CPU #12 [ 5.509992] Switched to NOHz mode on CPU #1 [ 5.510004] Switched to NOHz mode on CPU #6 [ 5.510009] Switched to NOHz mode on CPU #8 [ 5.510011] Switched to NOHz mode on CPU #9 [ 5.510035] Switched to NOHz mode on CPU #13 [ 5.510044] Switched to NOHz mode on CPU #4 [ 5.510046] Switched to NOHz mode on CPU #7 [ 5.541567] pnp: PnP ACPI init [ 5.541587] ACPI: bus type pnp registered [ 5.541734] pnp 00:00: [bus 00-ff] [ 5.541737] pnp 00:00: [io 0x0cf8-0x0cff] [ 5.541739] pnp 00:00: [io 0x0000-0x0cf7 window] [ 5.541741] pnp 00:00: [io 0x0d00-0xffff window] [ 5.541742] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 5.541744] pnp 00:00: [mem 0x00000000 window] [ 5.541746] pnp 00:00: [mem 0xc0000000-0xffffffff window] [ 5.541988] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 5.542009] pnp 00:01: [mem 0xfc000000-0xfcffffff] [ 5.542011] pnp 00:01: [mem 0xfd000000-0xfdffffff] [ 5.542013] pnp 00:01: [mem 0xfe000000-0xfe9fffff] [ 5.542015] pnp 00:01: [mem 0xfea00000-0xfea0001f] [ 5.542016] pnp 00:01: [mem 0xfeb00000-0xfebfffff] [ 5.542018] pnp 00:01: [mem 0xfed00400-0xfed3ffff] [ 5.542020] pnp 00:01: [mem 0xfed45000-0xfedfffff] [ 5.542313] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved [ 5.542316] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved [ 5.542319] system 00:01: [mem 0xfe000000-0xfe9fffff] has been reserved [ 5.542321] system 00:01: [mem 0xfea00000-0xfea0001f] has been reserved [ 5.542324] system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved [ 5.542327] system 00:01: [mem 0xfed00400-0xfed3ffff] could not be reserved [ 5.542330] system 00:01: [mem 0xfed45000-0xfedfffff] has been reserved [ 5.542334] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 5.542683] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 5.542685] pnp 00:02: [io 0x0290-0x029f] [ 5.542691] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 5.542693] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 5.542695] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 5.542974] system 00:02: [io 0x0290-0x029f] has been reserved [ 5.542978] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.543031] pnp 00:03: [io 0x0060] [ 5.543033] pnp 00:03: [io 0x0064] [ 5.543040] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:0) [ 5.543049] pnp 00:03: [irq 1] [ 5.543194] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 5.543274] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:0) [ 5.543281] pnp 00:04: [irq 12] [ 5.543425] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 5.544280] pnp 00:05: [io 0x03f8-0x03ff] [ 5.544285] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:0) [ 5.544291] pnp 00:05: [irq 4] [ 5.544293] pnp 00:05: [dma 0 disabled] [ 5.544464] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 5.545074] pnp 00:06: [io 0x02f8-0x02ff] [ 5.545078] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:0) [ 5.545085] pnp 00:06: [irq 3] [ 5.545087] pnp 00:06: [dma 0 disabled] [ 5.545257] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 5.545556] pnp 00:07: [dma 4] [ 5.545558] pnp 00:07: [io 0x0000-0x000f] [ 5.545559] pnp 00:07: [io 0x0081-0x0083] [ 5.545561] pnp 00:07: [io 0x0087] [ 5.545563] pnp 00:07: [io 0x0089-0x008b] [ 5.545564] pnp 00:07: [io 0x008f] [ 5.545565] pnp 00:07: [io 0x00c0-0x00df] [ 5.545708] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active) [ 5.545732] pnp 00:08: [io 0x0070-0x0071] [ 5.545736] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:0) [ 5.545742] pnp 00:08: [irq 8] [ 5.545898] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active) [ 5.545915] pnp 00:09: [io 0x0061] [ 5.546048] pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active) [ 5.546085] pnp 00:0a: [io 0x0010-0x001f] [ 5.546087] pnp 00:0a: [io 0x0022-0x003f] [ 5.546089] pnp 00:0a: [io 0x0044-0x005f] [ 5.546090] pnp 00:0a: [io 0x0062-0x0063] [ 5.546092] pnp 00:0a: [io 0x0065-0x006f] [ 5.546093] pnp 00:0a: [io 0x0072-0x007f] [ 5.546095] pnp 00:0a: [io 0x0080] [ 5.546096] pnp 00:0a: [io 0x0084-0x0086] [ 5.546098] pnp 00:0a: [io 0x0088] [ 5.546099] pnp 00:0a: [io 0x008c-0x008e] [ 5.546101] pnp 00:0a: [io 0x0090-0x009f] [ 5.546102] pnp 00:0a: [io 0x00a2-0x00bf] [ 5.546104] pnp 00:0a: [io 0x00e0-0x00ef] [ 5.546105] pnp 00:0a: [io 0x04d0-0x04d1] [ 5.546395] system 00:0a: [io 0x04d0-0x04d1] has been reserved [ 5.546399] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.546419] pnp 00:0b: [io 0x00f0-0x00ff] [ 5.546423] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:0) [ 5.546429] pnp 00:0b: [irq 13] [ 5.546564] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active) [ 5.547009] pnp 00:0c: [io 0x0400-0x047f] [ 5.547011] pnp 00:0c: [io 0x1180-0x119f] [ 5.547013] pnp 00:0c: [io 0x0500-0x057f] [ 5.547014] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff] [ 5.547016] pnp 00:0c: [mem 0xfec00000-0xfecfffff] [ 5.547018] pnp 00:0c: [mem 0xff000000-0xffffffff] [ 5.547306] system 00:0c: [io 0x0400-0x047f] has been reserved [ 5.547309] system 00:0c: [io 0x1180-0x119f] has been reserved [ 5.547312] system 00:0c: [io 0x0500-0x057f] has been reserved [ 5.547315] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 5.547318] system 00:0c: [mem 0xfec00000-0xfecfffff] could not be reserved [ 5.547321] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved [ 5.547325] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 5.547649] pnp 00:0d: [mem 0xfed00000-0xfed003ff] [ 5.547833] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active) [ 5.548234] pnp: PnP ACPI: found 14 devices [ 5.548236] ACPI: ACPI bus type pnp unregistered [ 5.564155] PCI: max bus depth: 2 pci_try_num: 3 [ 5.564280] pci 0000:00:16.0: BAR 0: assigned [mem 0xd0000000-0xd0003fff 64bit] [ 5.564287] pci 0000:00:16.0: BAR 0: set to [mem 0xd0000000-0xd0003fff 64bit] (PCI address [0xd0000000-0xd0003fff]) [ 5.564291] pci 0000:00:16.1: BAR 0: assigned [mem 0xd0004000-0xd0007fff 64bit] [ 5.564298] pci 0000:00:16.1: BAR 0: set to [mem 0xd0004000-0xd0007fff 64bit] (PCI address [0xd0004000-0xd0007fff]) [ 5.564301] pci 0000:00:16.2: BAR 0: assigned [mem 0xd0008000-0xd000bfff 64bit] [ 5.564308] pci 0000:00:16.2: BAR 0: set to [mem 0xd0008000-0xd000bfff 64bit] (PCI address [0xd0008000-0xd000bfff]) [ 5.564312] pci 0000:00:16.3: BAR 0: assigned [mem 0xd000c000-0xd000ffff 64bit] [ 5.564319] pci 0000:00:16.3: BAR 0: set to [mem 0xd000c000-0xd000ffff 64bit] (PCI address [0xd000c000-0xd000ffff]) [ 5.564323] pci 0000:00:16.4: BAR 0: assigned [mem 0xd0010000-0xd0013fff 64bit] [ 5.564329] pci 0000:00:16.4: BAR 0: set to [mem 0xd0010000-0xd0013fff 64bit] (PCI address [0xd0010000-0xd0013fff]) [ 5.564334] pci 0000:00:16.5: BAR 0: assigned [mem 0xd0014000-0xd0017fff 64bit] [ 5.564340] pci 0000:00:16.5: BAR 0: set to [mem 0xd0014000-0xd0017fff 64bit] (PCI address [0xd0014000-0xd0017fff]) [ 5.564345] pci 0000:00:16.6: BAR 0: assigned [mem 0xd0018000-0xd001bfff 64bit] [ 5.564351] pci 0000:00:16.6: BAR 0: set to [mem 0xd0018000-0xd001bfff 64bit] (PCI address [0xd0018000-0xd001bfff]) [ 5.564356] pci 0000:00:16.7: BAR 0: assigned [mem 0xd001c000-0xd001ffff 64bit] [ 5.564362] pci 0000:00:16.7: BAR 0: set to [mem 0xd001c000-0xd001ffff 64bit] (PCI address [0xd001c000-0xd001ffff]) [ 5.564367] pci 0000:00:1f.3: BAR 0: assigned [mem 0xd0020000-0xd00200ff 64bit] [ 5.564374] pci 0000:00:1f.3: BAR 0: set to [mem 0xd0020000-0xd00200ff 64bit] (PCI address [0xd0020000-0xd00200ff]) [ 5.564379] pci 0000:00:1c.4: BAR 9: assigned [mem 0xd0100000-0xd02fffff 64bit pref] [ 5.564383] pci 0000:00:1c.0: BAR 9: assigned [mem 0xd0300000-0xd04fffff 64bit pref] [ 5.564386] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 5.564389] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 5.564394] pci 0000:00:01.0: bridge window [mem 0xfb900000-0xfbafffff] [ 5.564403] pci 0000:00:02.0: PCI bridge to [bus 03-03] [ 5.564414] pci 0000:00:03.0: PCI bridge to [bus 04-04] [ 5.564417] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff] [ 5.564422] pci 0000:00:03.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 5.564430] pci 0000:00:04.0: PCI bridge to [bus 05-05] [ 5.564441] pci 0000:00:05.0: PCI bridge to [bus 06-06] [ 5.564453] pci 0000:00:06.0: PCI bridge to [bus 07-07] [ 5.564464] pci 0000:00:07.0: PCI bridge to [bus 08-08] [ 5.564475] pci 0000:00:08.0: PCI bridge to [bus 09-09] [ 5.564487] pci 0000:0a:00.0: PCI bridge to [bus 0b-0b] [ 5.564499] pci 0000:0a:00.2: PCI bridge to [bus 0c-0c] [ 5.564501] pci 0000:0a:00.2: bridge window [io 0xc000-0xcfff] [ 5.564506] pci 0000:0a:00.2: bridge window [mem 0xfbd00000-0xfbdfffff] [ 5.564515] pci 0000:00:09.0: PCI bridge to [bus 0a-0c] [ 5.564518] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] [ 5.564523] pci 0000:00:09.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 5.564531] pci 0000:00:0a.0: PCI bridge to [bus 0d-0d] [ 5.564542] pci 0000:00:1c.0: PCI bridge to [bus 0e-0e] [ 5.564546] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff] [ 5.564552] pci 0000:00:1c.0: bridge window [mem 0xfb600000-0xfb8fffff] [ 5.564557] pci 0000:00:1c.0: bridge window [mem 0xd0300000-0xd04fffff 64bit pref] [ 5.564566] pci 0000:00:1c.4: PCI bridge to [bus 0f-0f] [ 5.564569] pci 0000:00:1c.4: bridge window [io 0xa000-0xafff] [ 5.564575] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff] [ 5.564580] pci 0000:00:1c.4: bridge window [mem 0xd0100000-0xd02fffff 64bit pref] [ 5.564589] pci 0000:00:1e.0: PCI bridge to [bus 10-10] [ 5.564592] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff] [ 5.564597] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff] [ 5.564603] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 5.564628] IOAPIC[0]: Set routing entry (0-16 -> 0x29 -> IRQ 16 Mode:1 Active:1 Dest:0) [ 5.564633] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.564638] pci 0000:00:01.0: setting latency timer to 64 [ 5.564646] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.564651] pci 0000:00:02.0: setting latency timer to 64 [ 5.564658] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.564662] pci 0000:00:03.0: setting latency timer to 64 [ 5.564669] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.564674] pci 0000:00:04.0: setting latency timer to 64 [ 5.564681] pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.564686] pci 0000:00:05.0: setting latency timer to 64 [ 5.564693] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.564698] pci 0000:00:06.0: setting latency timer to 64 [ 5.564706] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.564711] pci 0000:00:07.0: setting latency timer to 64 [ 5.564718] pci 0000:00:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.564723] pci 0000:00:08.0: setting latency timer to 64 [ 5.564730] pci 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.564734] pci 0000:00:09.0: setting latency timer to 64 [ 5.564744] pci 0000:0a:00.0: setting latency timer to 64 [ 5.564753] pci 0000:0a:00.2: setting latency timer to 64 [ 5.564760] pci 0000:00:0a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.564765] pci 0000:00:0a.0: setting latency timer to 64 [ 5.564780] IOAPIC[0]: Set routing entry (0-17 -> 0x41 -> IRQ 17 Mode:1 Active:1 Dest:0) [ 5.564784] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 5.564789] pci 0000:00:1c.0: setting latency timer to 64 [ 5.564798] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 5.564803] pci 0000:00:1c.4: setting latency timer to 64 [ 5.564813] pci 0000:00:1e.0: setting latency timer to 64 [ 5.564828] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 5.564830] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 5.564832] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 5.564834] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff] [ 5.564836] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 5.564838] pci_bus 0000:01: resource 1 [mem 0xfb900000-0xfbafffff] [ 5.564840] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 5.564842] pci_bus 0000:04: resource 1 [mem 0xfbe00000-0xfbefffff] [ 5.564844] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 5.564846] pci_bus 0000:0a: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 5.564848] pci_bus 0000:0c: resource 0 [io 0xc000-0xcfff] [ 5.564850] pci_bus 0000:0c: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 5.564852] pci_bus 0000:0e: resource 0 [io 0xb000-0xbfff] [ 5.564854] pci_bus 0000:0e: resource 1 [mem 0xfb600000-0xfb8fffff] [ 5.564855] pci_bus 0000:0e: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref] [ 5.564857] pci_bus 0000:0f: resource 0 [io 0xa000-0xafff] [ 5.564859] pci_bus 0000:0f: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 5.564861] pci_bus 0000:0f: resource 2 [mem 0xd0100000-0xd02fffff 64bit pref] [ 5.564863] pci_bus 0000:10: resource 0 [io 0x9000-0x9fff] [ 5.564865] pci_bus 0000:10: resource 1 [mem 0xfbb00000-0xfbbfffff] [ 5.564867] pci_bus 0000:10: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref] [ 5.564869] pci_bus 0000:10: resource 4 [io 0x0000-0x0cf7] [ 5.564870] pci_bus 0000:10: resource 5 [io 0x0d00-0xffff] [ 5.564872] pci_bus 0000:10: resource 6 [mem 0x000a0000-0x000bffff] [ 5.564874] pci_bus 0000:10: resource 7 [mem 0xc0000000-0xffffffff] [ 5.564876] pci_bus 0000:fe: resource 0 [io 0x0000-0xffff] [ 5.564878] pci_bus 0000:fe: resource 1 [mem 0x00000000-0xffffffffff] [ 5.564880] pci_bus 0000:ff: resource 0 [io 0x0000-0xffff] [ 5.564882] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xffffffffff] [ 5.564970] NET: Registered protocol family 2 [ 5.565582] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 5.568046] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 5.570665] TCP bind hash table entries: 65536 (order: 10, 5242880 bytes) [ 5.573747] TCP: Hash tables configured (established 524288 bind 65536) [ 5.573764] TCP reno registered [ 5.573936] UDP hash table entries: 4096 (order: 7, 786432 bytes) [ 5.574497] UDP-Lite hash table entries: 4096 (order: 7, 786432 bytes) [ 5.575134] NET: Registered protocol family 1 [ 6.949669] RPC: Registered named UNIX socket transport module. [ 6.955868] RPC: Registered udp transport module. [ 6.960826] RPC: Registered tcp transport module. [ 6.965788] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 6.972596] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f30 [ 6.979387] pci 0000:00:1a.0: Performing full reset [ 6.984537] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0030 [ 6.991317] pci 0000:00:1a.2: Performing full reset [ 6.996499] pci 0000:00:1a.7: EHCI: BIOS handoff [ 8.098313] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 8.105754] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x1f30 [ 8.112531] pci 0000:00:1d.0: Performing full reset [ 8.117681] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030 [ 8.124459] pci 0000:00:1d.1: Performing full reset [ 8.129610] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030 [ 8.136389] pci 0000:00:1d.2: Performing full reset [ 8.141572] pci 0000:00:1d.7: EHCI: BIOS handoff [ 9.243364] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 9.250815] pci 0000:04:00.0: Disabling L0s [ 9.255332] pci 0000:04:00.1: Disabling L0s [ 9.259921] pci 0000:10:01.0: Boot video device [ 9.264846] PCI: CLS 64 bytes, default 64 [ 9.269221] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 9.275920] Placing 64MB software IO TLB between ffff8800b6c00000 - ffff8800bac00000 [ 9.284129] software IO TLB at phys 0xb6c00000 - 0xbac00000 [ 9.299924] Machine check injector initialized [ 9.310392] microcode: CPU0 sig=0x106a4, pf=0x1, revision=0x7 [ 9.316398] microcode: CPU1 sig=0x106a4, pf=0x1, revision=0x7 [ 9.322396] microcode: CPU2 sig=0x106a4, pf=0x1, revision=0x7 [ 9.328396] microcode: CPU3 sig=0x106a4, pf=0x1, revision=0x7 [ 9.334408] microcode: CPU4 sig=0x106a4, pf=0x1, revision=0x7 [ 9.340412] microcode: CPU5 sig=0x106a4, pf=0x1, revision=0x7 [ 9.346419] microcode: CPU6 sig=0x106a4, pf=0x1, revision=0x7 [ 9.352420] microcode: CPU7 sig=0x106a4, pf=0x1, revision=0x7 [ 9.358428] microcode: CPU8 sig=0x106a4, pf=0x1, revision=0x7 [ 9.364433] microcode: CPU9 sig=0x106a4, pf=0x1, revision=0x7 [ 9.370433] microcode: CPU10 sig=0x106a4, pf=0x1, revision=0x7 [ 9.376516] microcode: CPU11 sig=0x106a4, pf=0x1, revision=0x7 [ 9.382612] microcode: CPU12 sig=0x106a4, pf=0x1, revision=0x7 [ 9.388707] microcode: CPU13 sig=0x106a4, pf=0x1, revision=0x7 [ 9.394802] microcode: CPU14 sig=0x106a4, pf=0x1, revision=0x7 [ 9.400897] microcode: CPU15 sig=0x106a4, pf=0x1, revision=0x7 [ 9.407145] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 9.417102] audit: initializing netlink socket (disabled) [ 9.422807] type=2000 audit(1312642827.086:1): initialized [ 9.467872] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 9.489872] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 9.497231] fuse init (API version 7.16) [ 9.502285] JFS: nTxBlock = 8192, nTxLock = 65536 [ 9.511115] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 9.522973] NILFS version 2 loaded [ 9.528041] Btrfs loaded [ 9.530843] msgmni has been set to 11790 [ 9.536575] async_tx: api initialized (async) [ 9.541479] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 9.549425] io scheduler noop registered [ 9.553609] io scheduler deadline registered [ 9.558320] io scheduler cfq registered (default) [ 9.564299] pcieport 0000:00:1c.0: setting latency timer to 64 [ 9.570454] pcieport 0000:00:1c.0: irq 88 for MSI/MSI-X [ 9.576108] pcieport 0000:00:1c.4: setting latency timer to 64 [ 9.582248] pcieport 0000:00:1c.4: irq 89 for MSI/MSI-X [ 9.588267] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 9.594859] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 9.603509] ACPI: Sleep Button [SLPB] [ 9.607574] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 9.616214] ACPI: Power Button [PWRB] [ 9.620281] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 9.628141] ACPI: Power Button [PWRF] [ 9.633131] ACPI: acpi_idle registered with cpuidle [ 9.638868] Monitor-Mwait will be used to enter C-3 state [ 9.644590] Monitor-Mwait will be used to enter C-3 state [ 9.669634] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 9.675803] ioatdma 0000:00:16.0: can't derive routing for PCI INT A [ 9.682410] ioatdma 0000:00:16.0: PCI INT A: no GSI [ 9.687685] ioatdma 0000:00:16.0: setting latency timer to 64 [ 9.693906] ioatdma 0000:00:16.0: irq 90 for MSI/MSI-X [ 9.699895] ioatdma 0000:00:16.1: can't derive routing for PCI INT B [ 9.706506] ioatdma 0000:00:16.1: PCI INT B: no GSI [ 9.711732] ioatdma 0000:00:16.1: setting latency timer to 64 [ 9.717906] ioatdma 0000:00:16.1: irq 91 for MSI/MSI-X [ 9.723775] ioatdma 0000:00:16.2: can't derive routing for PCI INT C [ 9.730386] ioatdma 0000:00:16.2: PCI INT C: no GSI [ 9.735608] ioatdma 0000:00:16.2: setting latency timer to 64 [ 9.741784] ioatdma 0000:00:16.2: irq 92 for MSI/MSI-X [ 9.747642] ioatdma 0000:00:16.3: can't derive routing for PCI INT D [ 9.754252] ioatdma 0000:00:16.3: PCI INT D: no GSI [ 9.759479] ioatdma 0000:00:16.3: setting latency timer to 64 [ 9.765660] ioatdma 0000:00:16.3: irq 93 for MSI/MSI-X [ 9.771515] ioatdma 0000:00:16.4: can't derive routing for PCI INT A [ 9.778119] ioatdma 0000:00:16.4: PCI INT A: no GSI [ 9.783349] ioatdma 0000:00:16.4: setting latency timer to 64 [ 9.789528] ioatdma 0000:00:16.4: irq 94 for MSI/MSI-X [ 9.795384] ioatdma 0000:00:16.5: can't derive routing for PCI INT B [ 9.801996] ioatdma 0000:00:16.5: PCI INT B: no GSI [ 9.807223] ioatdma 0000:00:16.5: setting latency timer to 64 [ 9.813402] ioatdma 0000:00:16.5: irq 95 for MSI/MSI-X [ 9.819265] ioatdma 0000:00:16.6: can't derive routing for PCI INT C [ 9.825872] ioatdma 0000:00:16.6: PCI INT C: no GSI [ 9.831099] ioatdma 0000:00:16.6: setting latency timer to 64 [ 9.837279] ioatdma 0000:00:16.6: irq 96 for MSI/MSI-X [ 9.843140] ioatdma 0000:00:16.7: can't derive routing for PCI INT D [ 9.849746] ioatdma 0000:00:16.7: PCI INT D: no GSI [ 9.854979] ioatdma 0000:00:16.7: setting latency timer to 64 [ 9.861155] ioatdma 0000:00:16.7: irq 97 for MSI/MSI-X [ 9.923937] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 9.951015] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 9.985945] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 10.053328] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 10.088979] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 10.103415] Initializing Nozomi driver 2.1d [ 10.108615] Non-volatile memory driver v1.3 [ 10.113948] Linux agpgart interface v0.103 [ 10.118422] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 10.127837] Hangcheck: Using getrawmonotonic(). [ 10.132697] [drm] Initialized drm 1.1.0 20060810 [ 10.137570] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module! [ 10.288764] Refined TSC clocksource calibration: 2666.761 MHz. [ 10.294851] Switching to clocksource tsc [ 13.157739] floppy0: no floppy controllers found [ 13.261640] brd: module loaded [ 13.266978] loop: module loaded [ 13.270957] Loading iSCSI transport class v2.0-870. [ 13.276882] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 13.282705] Detecting Adaptec I2O RAID controllers... [ 13.288301] Adaptec aacraid driver 1.1-7[28000]-ms [ 13.294495] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 13.301803] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.03.07.03-k. [ 13.310657] iscsi: registered transport (qla4xxx) [ 13.315729] QLogic iSCSI HBA Driver [ 13.319600] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 13.327475] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 13.334801] megasas: 00.00.05.40-rc1 Tue. Jul. 26 17:00:00 PDT 2011 [ 13.341447] mpt2sas version 09.100.00.00 loaded [ 13.346746] ahci 0000:00:1f.2: version 3.0 [ 13.351122] IOAPIC[0]: Set routing entry (0-19 -> 0x99 -> IRQ 19 Mode:1 Active:1 Dest:0) [ 13.359680] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 13.366792] ahci 0000:00:1f.2: irq 98 for MSI/MSI-X [ 13.372015] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 13.380648] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ccc ems sxs [ 13.389112] ahci 0000:00:1f.2: setting latency timer to 64 [ 13.406178] scsi0 : ahci [ 13.409232] scsi1 : ahci [ 13.412244] scsi2 : ahci [ 13.415242] scsi3 : ahci [ 13.418241] scsi4 : ahci [ 13.421244] scsi5 : ahci [ 13.424531] ata1: SATA max UDMA/133 abar m2048@0xfbf00000 port 0xfbf00100 irq 98 [ 13.432394] ata2: SATA max UDMA/133 abar m2048@0xfbf00000 port 0xfbf00180 irq 98 [ 13.440251] ata3: SATA max UDMA/133 abar m2048@0xfbf00000 port 0xfbf00200 irq 98 [ 13.448108] ata4: SATA max UDMA/133 abar m2048@0xfbf00000 port 0xfbf00280 irq 98 [ 13.455966] ata5: SATA max UDMA/133 abar m2048@0xfbf00000 port 0xfbf00300 irq 98 [ 13.463823] ata6: SATA max UDMA/133 abar m2048@0xfbf00000 port 0xfbf00380 irq 98 [ 13.474365] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 13.481665] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 13.487788] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.16-k [ 13.500384] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 13.506672] Intel(R) Gigabit Ethernet Network Driver - version 3.0.6-k [ 13.513450] Copyright (c) 2007-2011 Intel Corporation. [ 13.518885] igb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.525848] igb 0000:01:00.0: setting latency timer to 64 [ 13.531813] igb 0000:01:00.0: irq 99 for MSI/MSI-X [ 13.536868] igb 0000:01:00.0: irq 100 for MSI/MSI-X [ 13.542013] igb 0000:01:00.0: irq 101 for MSI/MSI-X [ 13.547154] igb 0000:01:00.0: irq 102 for MSI/MSI-X [ 13.552298] igb 0000:01:00.0: irq 103 for MSI/MSI-X [ 13.557441] igb 0000:01:00.0: irq 104 for MSI/MSI-X [ 13.562585] igb 0000:01:00.0: irq 105 for MSI/MSI-X [ 13.567727] igb 0000:01:00.0: irq 106 for MSI/MSI-X [ 13.572862] igb 0000:01:00.0: irq 107 for MSI/MSI-X [ 13.751295] igb 0000:01:00.0: DCA enabled [ 13.755608] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 13.762730] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:30:48:c6:8a:aa [ 13.770186] igb 0000:01:00.0: eth0: PBA No: 0010FF-0FF [ 13.775576] igb 0000:01:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 13.775699] ata4: SATA link down (SStatus 0 SControl 300) [ 13.775738] ata3: SATA link down (SStatus 0 SControl 300) [ 13.775774] ata5: SATA link down (SStatus 0 SControl 300) [ 13.775810] ata2: SATA link down (SStatus 0 SControl 300) [ 13.775849] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 13.777892] ata1.00: ATA-8: ST3500320NS, SN05, max UDMA/133 [ 13.777894] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 13.780370] ata1.00: configured for UDMA/133 [ 13.780601] scsi 0:0:0:0: Direct-Access ATA ST3500320NS SN05 PQ: 0 ANSI: 5 [ 13.781057] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 13.781188] sd 0:0:0:0: [sda] Write Protect is off [ 13.781191] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 13.781244] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.795652] sda: sda1 sda2 sda3 [ 13.869797] igb 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 13.870315] sd 0:0:0:0: [sda] Attached SCSI disk [ 13.881630] igb 0000:01:00.1: setting latency timer to 64 [ 13.887598] igb 0000:01:00.1: irq 108 for MSI/MSI-X [ 13.892741] igb 0000:01:00.1: irq 109 for MSI/MSI-X [ 13.897882] igb 0000:01:00.1: irq 110 for MSI/MSI-X [ 13.903021] igb 0000:01:00.1: irq 111 for MSI/MSI-X [ 13.908162] igb 0000:01:00.1: irq 112 for MSI/MSI-X [ 13.913303] igb 0000:01:00.1: irq 113 for MSI/MSI-X [ 13.918438] igb 0000:01:00.1: irq 114 for MSI/MSI-X [ 13.923575] igb 0000:01:00.1: irq 115 for MSI/MSI-X [ 13.928717] igb 0000:01:00.1: irq 116 for MSI/MSI-X [ 14.095439] igb 0000:01:00.1: DCA enabled [ 14.099749] igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection [ 14.106872] igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:30:48:c6:8a:ab [ 14.114327] igb 0000:01:00.1: eth1: PBA No: 0010FF-0FF [ 14.119716] igb 0000:01:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 14.127856] Intel(R) Virtual Function Network Driver - version 2.0.0-k [ 14.134637] Copyright (c) 2009 - 2010 Intel Corporation. [ 14.140320] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.4.8-k [ 14.148442] ixgbe: Copyright (c) 1999-2011 Intel Corporation. [ 14.154548] ixgbe 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 14.161750] ixgbe 0000:04:00.0: setting latency timer to 64 [ 14.233533] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 14.247917] ixgbe 0000:04:00.0: irq 117 for MSI/MSI-X [ 14.253233] ixgbe 0000:04:00.0: irq 118 for MSI/MSI-X [ 14.258545] ixgbe 0000:04:00.0: irq 119 for MSI/MSI-X [ 14.263851] ixgbe 0000:04:00.0: irq 120 for MSI/MSI-X [ 14.269159] ixgbe 0000:04:00.0: irq 121 for MSI/MSI-X [ 14.274466] ixgbe 0000:04:00.0: irq 122 for MSI/MSI-X [ 14.279774] ixgbe 0000:04:00.0: irq 123 for MSI/MSI-X [ 14.285093] ixgbe 0000:04:00.0: irq 124 for MSI/MSI-X [ 14.290407] ixgbe 0000:04:00.0: irq 125 for MSI/MSI-X [ 14.295714] ixgbe 0000:04:00.0: irq 126 for MSI/MSI-X [ 14.301022] ixgbe 0000:04:00.0: irq 127 for MSI/MSI-X [ 14.306339] ixgbe 0000:04:00.0: irq 128 for MSI/MSI-X [ 14.311655] ixgbe 0000:04:00.0: irq 129 for MSI/MSI-X [ 14.316964] ixgbe 0000:04:00.0: irq 130 for MSI/MSI-X [ 14.320760] ata6.00: ATAPI: SlimtypeDVD A DS8A1P, CX17, max UDMA/33 [ 14.320763] ata6.00: applying bridge limits [ 14.333311] ixgbe 0000:04:00.0: irq 131 for MSI/MSI-X [ 14.333423] ata6.00: configured for UDMA/33 [ 14.343061] ixgbe 0000:04:00.0: irq 132 for MSI/MSI-X [ 14.348376] ixgbe 0000:04:00.0: irq 133 for MSI/MSI-X [ 14.353797] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 16, Tx Queue count = 16 [ 14.362837] ixgbe 0000:04:00.0: (PCI Express:2.5GT/s:Width x8) 00:1b:21:29:17:d5 [ 14.370838] ixgbe 0000:04:00.0: MAC: 1, PHY: 7, PBA No: E27462-006 [ 14.379837] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 14.386698] ixgbe 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 14.393899] ixgbe 0000:04:00.1: setting latency timer to 64 [ 14.432991] scsi 5:0:0:0: CD-ROM Slimtype DVD A DS8A1P CX17 PQ: 0 ANSI: 5 [ 15.914626] ixgbe 0000:04:00.1: irq 134 for MSI/MSI-X [ 15.919941] ixgbe 0000:04:00.1: irq 135 for MSI/MSI-X [ 15.925257] ixgbe 0000:04:00.1: irq 136 for MSI/MSI-X [ 15.930574] ixgbe 0000:04:00.1: irq 137 for MSI/MSI-X [ 15.935888] ixgbe 0000:04:00.1: irq 138 for MSI/MSI-X [ 15.941197] ixgbe 0000:04:00.1: irq 139 for MSI/MSI-X [ 15.946504] ixgbe 0000:04:00.1: irq 140 for MSI/MSI-X [ 15.951813] ixgbe 0000:04:00.1: irq 141 for MSI/MSI-X [ 15.957130] ixgbe 0000:04:00.1: irq 142 for MSI/MSI-X [ 15.962445] ixgbe 0000:04:00.1: irq 143 for MSI/MSI-X [ 15.967761] ixgbe 0000:04:00.1: irq 144 for MSI/MSI-X [ 15.973078] ixgbe 0000:04:00.1: irq 145 for MSI/MSI-X [ 15.978385] ixgbe 0000:04:00.1: irq 146 for MSI/MSI-X [ 15.983692] ixgbe 0000:04:00.1: irq 147 for MSI/MSI-X [ 15.989000] ixgbe 0000:04:00.1: irq 148 for MSI/MSI-X [ 15.994316] ixgbe 0000:04:00.1: irq 149 for MSI/MSI-X [ 15.999625] ixgbe 0000:04:00.1: irq 150 for MSI/MSI-X [ 16.005048] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 16, Tx Queue count = 16 [ 16.014084] ixgbe 0000:04:00.1: (PCI Express:2.5GT/s:Width x8) 00:1b:21:29:17:d4 [ 16.022084] ixgbe 0000:04:00.1: MAC: 1, PHY: 7, PBA No: E27462-006 [ 16.031122] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 16.037999] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 16.045382] ixgb: Copyright (c) 1999-2008 Intel Corporation. [ 16.051846] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 16.058275] ns83820.c: National Semiconductor DP83820 10/100/1000 driver. [ 16.065654] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.7 (July 20, 2011) [ 16.073695] sky2: driver version 1.29 [ 16.079012] tun: Universal TUN/TAP device driver, 1.6 [ 16.084316] tun: (C) 1999-2004 Max Krasnyansky [ 16.091139] usbcore: registered new interface driver catc [ 16.096789] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver [ 16.103021] usbcore: registered new interface driver kaweth [ 16.108848] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 16.116850] usbcore: registered new interface driver pegasus [ 16.122758] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver [ 16.129937] usbcore: registered new interface driver rtl8150 [ 16.135904] usbcore: registered new interface driver asix [ 16.141621] usbcore: registered new interface driver cdc_ether [ 16.147770] usbcore: registered new interface driver cdc_eem [ 16.153736] usbcore: registered new interface driver dm9601 [ 16.159619] usbcore: registered new interface driver smsc75xx [ 16.165681] usbcore: registered new interface driver smsc95xx [ 16.171735] usbcore: registered new interface driver gl620a [ 16.177620] usbcore: registered new interface driver net1080 [ 16.183585] usbcore: registered new interface driver plusb [ 16.189377] usbcore: registered new interface driver rndis_host [ 16.195609] usbcore: registered new interface driver cdc_subset [ 16.201843] usbcore: registered new interface driver zaurus [ 16.207732] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 16.215651] usbcore: registered new interface driver int51x1 [ 16.221562] cdc_ncm: 01-June-2011 [ 16.225190] usbcore: registered new interface driver cdc_ncm [ 16.231101] netconsole: local port 6665 [ 16.235195] netconsole: local IP 10.0.0.0 [ 16.239456] netconsole: interface 'eth0' [ 16.243631] netconsole: remote port 6666 [ 16.247806] netconsole: remote IP 192.168.1.1 [ 16.252413] netconsole: remote ethernet address 00:30:48:fe:19:95 [ 16.258759] netconsole: device eth0 not up yet, forcing it [ 18.540899] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 18.553427] console [netcon0] enabled [ 18.557351] netconsole: network logging started [ 18.562226] Fusion MPT base driver 3.04.19 [ 18.566583] Copyright (c) 1999-2008 LSI Corporation [ 18.571733] Fusion MPT SPI Host driver 3.04.19 [ 18.576572] Fusion MPT FC Host driver 3.04.19 [ 18.581318] Fusion MPT SAS Host driver 3.04.19 [ 18.586081] mptsas 0000:0e:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 18.593455] mptbase: ioc0: Initiating bringup [ 18.736909] ioc0: LSISAS1068E B2: Capabilities={Initiator} [ 18.742972] mptsas 0000:0e:00.0: setting latency timer to 64 [ 139.736583] scsi6 : ioc0: LSISAS1068E B2, FwRev=01120000h, Ports=1, MaxQ=511, IRQ=16 [ 139.772782] mptsas: ioc0: add expander: num_phys 25, sas_addr (0x500015535062223f) [ 139.870006] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 35, phy 0, sas_addr 0x5000155350622200 [ 139.884052] scsi 6:0:0:0: Direct-Access ATA ST3750330NS SN05 PQ: 0 ANSI: 5 [ 139.895362] sd 6:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 139.895962] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 37, phy 1, sas_addr 0x5000155350622201 [ 139.899673] scsi 6:0:1:0: Direct-Access ATA ST3750330NS SN05 PQ: 0 ANSI: 5 [ 139.902394] sd 6:0:1:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 139.903003] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 39, phy 2, sas_addr 0x5000155350622202 [ 139.906739] scsi 6:0:2:0: Direct-Access ATA ST3750330NS SN05 PQ: 0 ANSI: 5 [ 139.909566] sd 6:0:2:0: [sdd] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 139.910177] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 41, phy 3, sas_addr 0x5000155350622203 [ 139.913891] scsi 6:0:3:0: Direct-Access ATA ST3750330NS SN05 PQ: 0 ANSI: 5 [ 139.916749] sd 6:0:3:0: [sde] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 139.917360] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 36, phy 4, sas_addr 0x5000155350622204 [ 139.921209] scsi 6:0:4:0: Direct-Access ATA ST3750330NS SN05 PQ: 0 ANSI: 5 [ 139.924059] sd 6:0:4:0: [sdf] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 139.924671] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 38, phy 5, sas_addr 0x5000155350622205 [ 139.955091] scsi 6:0:5:0: Direct-Access ATA ST3750330NS SN05 PQ: 0 ANSI: 5 [ 139.957876] sd 6:0:5:0: [sdg] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 139.958492] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 40, phy 6, sas_addr 0x5000155350622206 [ 139.988096] scsi 6:0:6:0: Direct-Access ATA ST3750330NS SN05 PQ: 0 ANSI: 5 [ 139.990844] sd 6:0:6:0: [sdh] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 139.991459] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 42, phy 7, sas_addr 0x5000155350622207 [ 139.994651] sd 6:0:1:0: [sdc] Write Protect is off [ 139.994653] sd 6:0:1:0: [sdc] Mode Sense: 73 00 00 08 [ 139.995233] scsi 6:0:7:0: Direct-Access ATA ST3750330NS SN05 PQ: 0 ANSI: 5 [ 139.998083] sd 6:0:7:0: [sdi] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 139.998695] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 27, phy 8, sas_addr 0x5000155350622208 [ 139.998940] sd 6:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 140.001453] scsi 6:0:8:0: Direct-Access ATA HDS725050KLA360 AD1A PQ: 0 ANSI: 5 [ 140.003650] sd 6:0:8:0: [sdj] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 140.004880] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 28, phy 9, sas_addr 0x5000155350622209 [ 140.006651] sd 6:0:2:0: [sdd] Write Protect is off [ 140.006654] sd 6:0:2:0: [sdd] Mode Sense: 73 00 00 08 [ 140.007703] scsi 6:0:9:0: Direct-Access ATA HDS725050KLA360 AD1A PQ: 0 ANSI: 5 [ 140.008625] sd 6:0:3:0: [sde] Write Protect is off [ 140.008627] sd 6:0:3:0: [sde] Mode Sense: 73 00 00 08 [ 140.009994] sd 6:0:9:0: [sdk] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 140.011104] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 30, phy 10, sas_addr 0x500015535062220a [ 140.011325] sd 6:0:2:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 140.013277] sd 6:0:3:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 140.014135] scsi 6:0:10:0: Direct-Access ATA HDS725050KLA360 AD1A PQ: 0 ANSI: 5 [ 140.016205] sd 6:0:10:0: [sdl] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 140.017434] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 29, phy 11, sas_addr 0x500015535062220b [ 140.019363] sd 6:0:4:0: [sdf] Write Protect is off [ 140.019365] sd 6:0:4:0: [sdf] Mode Sense: 73 00 00 08 [ 140.020221] scsi 6:0:11:0: Direct-Access ATA HDS725050KLA360 AD1A PQ: 0 ANSI: 5 [ 140.022287] sd 6:0:11:0: [sdm] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 140.023540] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 56, phy 24, sas_addr 0x500015535062223e [ 140.023755] sd 6:0:4:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 140.028754] scsi 6:0:12:0: Enclosure PROMISE 2U-SAS-12-D2 BP 0107 PQ: 0 ANSI: 5 [ 140.059414] Fusion MPT misc device (ioctl) driver 3.04.19 [ 140.059537] mptctl: Registered with Fusion MPT base driver [ 140.059539] mptctl: /dev/mptctl @ (major,minor=10,220) [ 140.059688] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 140.059690] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 [ 140.059756] IOAPIC[0]: Set routing entry (0-18 -> 0x6c -> IRQ 18 Mode:1 Active:1 Dest:0) [ 140.059763] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 140.059795] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 140.059799] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 140.059879] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file 'devices' [ 140.059898] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '001' [ 140.059914] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 140.059924] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 140.059928] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 140.059965] ehci_hcd 0000:00:1a.7: debug port 1 [ 140.059971] ehci_hcd 0000:00:1a.7: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT [ 140.063859] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 140.063861] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 140.063886] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbf02000 [ 140.063890] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 140.066767] sd 6:0:5:0: [sdg] Write Protect is off [ 140.066770] sd 6:0:5:0: [sdg] Mode Sense: 73 00 00 08 [ 140.067777] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 140.070454] sd 6:0:5:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 140.073412] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 140.073505] usb usb1: default language 0x0409 [ 140.073516] usb usb1: udev 1, busnum 1, minor = 0 [ 140.073518] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 140.073521] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 140.073523] usb usb1: Product: EHCI Host Controller [ 140.073525] usb usb1: Manufacturer: Linux 3.0.0-next-20110802+ ehci_hcd [ 140.073526] usb usb1: SerialNumber: 0000:00:1a.7 [ 140.073747] usb usb1: usb_probe_device [ 140.073750] usb usb1: configuration #1 chosen from 1 choice [ 140.073784] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 140.073894] hub 1-0:1.0: usb_probe_interface [ 140.073896] hub 1-0:1.0: usb_probe_interface - got id [ 140.073897] hub 1-0:1.0: USB hub found [ 140.073904] hub 1-0:1.0: 6 ports detected [ 140.073906] hub 1-0:1.0: standalone hub [ 140.073907] hub 1-0:1.0: no power switching (usb 1.0) [ 140.073908] hub 1-0:1.0: individual port over-current protection [ 140.073910] hub 1-0:1.0: power on to power good time: 20ms [ 140.073932] hub 1-0:1.0: local power source is good [ 140.073934] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 140.073988] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '001' [ 140.074196] IOAPIC[0]: Set routing entry (0-23 -> 0x74 -> IRQ 23 Mode:1 Active:1 Dest:0) [ 140.074201] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 140.074227] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 140.074230] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 140.074238] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '002' [ 140.074250] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 140.074258] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 140.074262] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 140.074293] ehci_hcd 0000:00:1d.7: debug port 1 [ 140.074297] ehci_hcd 0000:00:1d.7: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT [ 140.078163] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 140.078165] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 140.078189] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbf01000 [ 140.078194] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 140.082053] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 140.087375] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 140.087439] usb usb2: default language 0x0409 [ 140.087450] usb usb2: udev 1, busnum 2, minor = 128 [ 140.087452] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 140.087454] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 140.087457] usb usb2: Product: EHCI Host Controller [ 140.087458] usb usb2: Manufacturer: Linux 3.0.0-next-20110802+ ehci_hcd [ 140.087460] usb usb2: SerialNumber: 0000:00:1d.7 [ 140.087680] usb usb2: usb_probe_device [ 140.087683] usb usb2: configuration #1 chosen from 1 choice [ 140.087694] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 140.087798] hub 2-0:1.0: usb_probe_interface [ 140.087800] hub 2-0:1.0: usb_probe_interface - got id [ 140.087801] hub 2-0:1.0: USB hub found [ 140.087807] hub 2-0:1.0: 6 ports detected [ 140.087809] hub 2-0:1.0: standalone hub [ 140.087810] hub 2-0:1.0: no power switching (usb 1.0) [ 140.087811] hub 2-0:1.0: individual port over-current protection [ 140.087813] hub 2-0:1.0: power on to power good time: 20ms [ 140.087821] hub 2-0:1.0: local power source is good [ 140.087822] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 140.087874] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '001' [ 140.088165] uhci_hcd: USB Universal Host Controller Interface driver [ 140.088248] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 140.088257] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 140.088261] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 140.088269] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '003' [ 140.088276] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 140.088285] uhci_hcd 0000:00:1a.0: detected 2 ports [ 140.088290] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 140.088292] uhci_hcd 0000:00:1a.0: Performing full reset [ 140.088307] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 140.088319] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0c0 [ 140.088414] usb usb3: default language 0x0409 [ 140.088425] usb usb3: udev 1, busnum 3, minor = 256 [ 140.088427] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 140.088429] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 140.088431] usb usb3: Product: UHCI Host Controller [ 140.088433] usb usb3: Manufacturer: Linux 3.0.0-next-20110802+ uhci_hcd [ 140.088434] usb usb3: SerialNumber: 0000:00:1a.0 [ 140.088634] usb usb3: usb_probe_device [ 140.088636] usb usb3: configuration #1 chosen from 1 choice [ 140.088646] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 140.088746] hub 3-0:1.0: usb_probe_interface [ 140.088747] hub 3-0:1.0: usb_probe_interface - got id [ 140.088749] hub 3-0:1.0: USB hub found [ 140.088755] hub 3-0:1.0: 2 ports detected [ 140.088757] hub 3-0:1.0: standalone hub [ 140.088758] hub 3-0:1.0: no power switching (usb 1.0) [ 140.088759] hub 3-0:1.0: individual port over-current protection [ 140.088761] hub 3-0:1.0: power on to power good time: 2ms [ 140.088768] hub 3-0:1.0: local power source is good [ 140.088770] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 140.088797] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '001' [ 140.088871] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0 [ 140.088979] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 140.088986] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 140.088989] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 140.088997] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '004' [ 140.089004] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4 [ 140.089013] uhci_hcd 0000:00:1a.2: detected 2 ports [ 140.089018] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 140.089019] uhci_hcd 0000:00:1a.2: Performing full reset [ 140.089035] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 140.089059] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000f0a0 [ 140.089106] usb usb4: default language 0x0409 [ 140.089117] usb usb4: udev 1, busnum 4, minor = 384 [ 140.089119] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 140.089121] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 140.089123] usb usb4: Product: UHCI Host Controller [ 140.089124] usb usb4: Manufacturer: Linux 3.0.0-next-20110802+ uhci_hcd [ 140.089126] usb usb4: SerialNumber: 0000:00:1a.2 [ 140.089317] usb usb4: usb_probe_device [ 140.089319] usb usb4: configuration #1 chosen from 1 choice [ 140.089328] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 140.089434] hub 4-0:1.0: usb_probe_interface [ 140.089436] hub 4-0:1.0: usb_probe_interface - got id [ 140.089437] hub 4-0:1.0: USB hub found [ 140.089443] hub 4-0:1.0: 2 ports detected [ 140.089445] hub 4-0:1.0: standalone hub [ 140.089446] hub 4-0:1.0: no power switching (usb 1.0) [ 140.089447] hub 4-0:1.0: individual port over-current protection [ 140.089449] hub 4-0:1.0: power on to power good time: 2ms [ 140.089456] hub 4-0:1.0: local power source is good [ 140.089458] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 140.089489] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '001' [ 140.089567] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2 [ 140.089673] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 140.089679] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 140.089682] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 140.089690] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '005' [ 140.089697] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 140.089706] uhci_hcd 0000:00:1d.0: detected 2 ports [ 140.089711] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 140.089712] uhci_hcd 0000:00:1d.0: Performing full reset [ 140.089728] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 140.089735] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080 [ 140.089781] usb usb5: default language 0x0409 [ 140.089791] usb usb5: udev 1, busnum 5, minor = 512 [ 140.089794] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 140.089796] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 140.089798] usb usb5: Product: UHCI Host Controller [ 140.089800] usb usb5: Manufacturer: Linux 3.0.0-next-20110802+ uhci_hcd [ 140.089801] usb usb5: SerialNumber: 0000:00:1d.0 [ 140.090003] usb usb5: usb_probe_device [ 140.090006] usb usb5: configuration #1 chosen from 1 choice [ 140.090015] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 140.090108] hub 5-0:1.0: usb_probe_interface [ 140.090110] hub 5-0:1.0: usb_probe_interface - got id [ 140.090112] hub 5-0:1.0: USB hub found [ 140.090118] hub 5-0:1.0: 2 ports detected [ 140.090119] hub 5-0:1.0: standalone hub [ 140.090120] hub 5-0:1.0: no power switching (usb 1.0) [ 140.090122] hub 5-0:1.0: individual port over-current protection [ 140.090123] hub 5-0:1.0: power on to power good time: 2ms [ 140.090131] hub 5-0:1.0: local power source is good [ 140.090132] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 140.090163] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '001' [ 140.090243] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 [ 140.090339] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 140.090346] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 140.090349] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 140.090364] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '006' [ 140.090371] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 140.090380] uhci_hcd 0000:00:1d.1: detected 2 ports [ 140.090385] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 140.090387] uhci_hcd 0000:00:1d.1: Performing full reset [ 140.090402] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 140.090409] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060 [ 140.090456] usb usb6: default language 0x0409 [ 140.090467] usb usb6: udev 1, busnum 6, minor = 640 [ 140.090469] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 140.090471] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 140.090473] usb usb6: Product: UHCI Host Controller [ 140.090474] usb usb6: Manufacturer: Linux 3.0.0-next-20110802+ uhci_hcd [ 140.090476] usb usb6: SerialNumber: 0000:00:1d.1 [ 140.090670] usb usb6: usb_probe_device [ 140.090672] usb usb6: configuration #1 chosen from 1 choice [ 140.090681] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 140.090776] hub 6-0:1.0: usb_probe_interface [ 140.090777] hub 6-0:1.0: usb_probe_interface - got id [ 140.090779] hub 6-0:1.0: USB hub found [ 140.090785] hub 6-0:1.0: 2 ports detected [ 140.090786] hub 6-0:1.0: standalone hub [ 140.090787] hub 6-0:1.0: no power switching (usb 1.0) [ 140.090789] hub 6-0:1.0: individual port over-current protection [ 140.090790] hub 6-0:1.0: power on to power good time: 2ms [ 140.090798] hub 6-0:1.0: local power source is good [ 140.090799] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 140.090839] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '001' [ 140.090923] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 [ 140.091019] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 140.091026] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 140.091030] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 140.091037] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '007' [ 140.091043] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 140.091051] uhci_hcd 0000:00:1d.2: detected 2 ports [ 140.091055] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 140.091056] uhci_hcd 0000:00:1d.2: Performing full reset [ 140.091072] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 140.091079] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040 [ 140.091128] usb usb7: default language 0x0409 [ 140.091139] usb usb7: udev 1, busnum 7, minor = 768 [ 140.091141] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 140.091143] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 140.091146] usb usb7: Product: UHCI Host Controller [ 140.091147] usb usb7: Manufacturer: Linux 3.0.0-next-20110802+ uhci_hcd [ 140.091149] usb usb7: SerialNumber: 0000:00:1d.2 [ 140.091341] usb usb7: usb_probe_device [ 140.091343] usb usb7: configuration #1 chosen from 1 choice [ 140.091353] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 140.091461] hub 7-0:1.0: usb_probe_interface [ 140.091462] hub 7-0:1.0: usb_probe_interface - got id [ 140.091464] hub 7-0:1.0: USB hub found [ 140.091470] hub 7-0:1.0: 2 ports detected [ 140.091471] hub 7-0:1.0: standalone hub [ 140.091473] hub 7-0:1.0: no power switching (usb 1.0) [ 140.091474] hub 7-0:1.0: individual port over-current protection [ 140.091475] hub 7-0:1.0: power on to power good time: 2ms [ 140.091483] hub 7-0:1.0: local power source is good [ 140.091484] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 140.091511] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '001' [ 140.091596] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 [ 140.091791] Initializing USB Mass Storage driver... [ 140.091900] usbcore: registered new interface driver usb-storage [ 140.091902] USB Mass Storage support registered. [ 140.092032] usbcore: registered new interface driver libusual [ 140.092117] usbcore: registered new interface driver ums-alauda [ 140.092200] usbcore: registered new interface driver ums-cypress [ 140.092287] usbcore: registered new interface driver ums-datafab [ 140.092377] usbcore: registered new interface driver ums-freecom [ 140.092466] usbcore: registered new interface driver ums-isd200 [ 140.092552] usbcore: registered new interface driver ums-jumpshot [ 140.092643] usbcore: registered new interface driver ums-karma [ 140.092730] usbcore: registered new interface driver ums-onetouch [ 140.092816] usbcore: registered new interface driver ums-sddr09 [ 140.092904] usbcore: registered new interface driver ums-sddr55 [ 140.092988] usbcore: registered new interface driver ums-usbat [ 140.093165] usbcore: registered new interface driver usbserial [ 140.093252] USB Serial support registered for generic [ 140.093356] usbcore: registered new interface driver usbserial_generic [ 140.093358] usbserial: USB Serial Driver core [ 140.093432] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter [ 140.093522] usbcore: registered new interface driver belkin [ 140.093523] belkin_sa: v1.3:USB Belkin Serial converter driver [ 140.093598] USB Serial support registered for MCT U232 [ 140.093693] usbcore: registered new interface driver mct_u232 [ 140.093695] mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver [ 140.093898] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 140.095981] sd 6:0:7:0: [sdi] Write Protect is off [ 140.095984] sd 6:0:7:0: [sdi] Mode Sense: 73 00 00 08 [ 140.096291] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 140.096310] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 140.096806] mousedev: PS/2 mouse device common for all mice [ 140.097718] rtc_cmos 00:08: RTC can wake from S4 [ 140.097981] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 140.098019] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 140.098094] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 140.098345] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0460) [ 140.098505] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 140.098508] iTCO_vendor_support: vendor-support=0 [ 140.098511] SoftDog: cannot register miscdev on minor=130 (err=-16) [ 140.098523] md: linear personality registered for level -1 [ 140.098525] md: raid0 personality registered for level 0 [ 140.098526] md: raid1 personality registered for level 1 [ 140.098528] md: raid10 personality registered for level 10 [ 140.098530] md: raid6 personality registered for level 6 [ 140.098531] md: raid5 personality registered for level 5 [ 140.098533] md: raid4 personality registered for level 4 [ 140.098535] md: multipath personality registered for level -4 [ 140.098537] md: faulty personality registered for level -5 [ 140.098881] device-mapper: uevent: version 1.0.3 [ 140.099078] sd 6:0:7:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 140.099227] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com [ 140.099474] device-mapper: multipath: version 1.3.0 loaded [ 140.099486] device-mapper: multipath round-robin: version 1.0.0 loaded [ 140.099488] device-mapper: multipath queue-length: version 0.1.0 loaded [ 140.099490] device-mapper: multipath service-time: version 0.2.0 loaded [ 140.099719] device-mapper: dm-log-userspace: version 1.1.0 loaded [ 140.101688] sd 6:0:6:0: [sdh] Write Protect is off [ 140.101690] sd 6:0:6:0: [sdh] Mode Sense: 73 00 00 08 [ 140.104135] cpuidle: using governor ladder [ 140.105455] sd 6:0:6:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 140.108102] sdc: sdc1 sdc2 sdc3 [ 140.121670] sde: sde1 sde2 sde3 [ 140.130267] sdd: sdd1 sdd2 sdd3 [ 140.178012] sd 6:0:8:0: [sdj] Write Protect is off [ 140.178015] sd 6:0:8:0: [sdj] Mode Sense: 73 00 00 08 [ 140.185364] sd 6:0:9:0: [sdk] Write Protect is off [ 140.185366] sd 6:0:9:0: [sdk] Mode Sense: 73 00 00 08 [ 140.185735] sd 6:0:8:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 140.187163] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 140.187170] hub 2-0:1.0: port 1: status 0501 change 0001 [ 140.188148] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 140.189143] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 140.189146] uhci_hcd 0000:00:1d.0: port 1 portsc 008a,00 [ 140.190135] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 140.191136] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 140.191210] sd 6:0:10:0: [sdl] Write Protect is off [ 140.191213] sd 6:0:10:0: [sdl] Mode Sense: 73 00 00 08 [ 140.193548] sd 6:0:9:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 140.196766] sdg: sdg1 sdg2 sdg3 [ 140.199123] sd 6:0:10:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 140.199623] sd 6:0:11:0: [sdm] Write Protect is off [ 140.199625] sd 6:0:11:0: [sdm] Mode Sense: 73 00 00 08 [ 140.207287] sd 6:0:11:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 140.209354] sdi: sdi1 sdi2 sdi3 [ 140.221897] sdh: sdh1 sdh2 sdh3 [ 140.375042] sdj: sdj1 sdj2 sdj3 [ 140.382974] sdk: sdk1 sdk2 sdk3 [ 140.388363] sdl: sdl1 sdl2 sdl3 [ 141.199516] usb usb3: suspend_rh (auto-stop) [ 141.199541] usb usb4: suspend_rh (auto-stop) [ 141.199566] usb usb6: suspend_rh (auto-stop) [ 141.199591] usb usb7: suspend_rh (auto-stop) [ 141.199614] usb usb5: suspend_rh (auto-stop) [ 142.325350] hub 2-0:1.0: state 7 ports 6 chg 0002 evt 0000 [ 142.325352] sdf: sdf1 sdf2 sdf3 [ 142.325354] sdm: sdm1 sdm2 sdm3 [ 142.325403] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 001030 0 ACK POWER sig=se0 OCC OC [ 142.325421] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001030 0 ACK POWER sig=se0 OCC OC [ 142.335295] cpuidle: using governor menu [ 142.335541] usbcore: registered new interface driver usbhid [ 142.335543] usbhid: USB HID core driver [ 142.336019] dell_wmi: No known WMI GUID found [ 142.336021] acer_wmi: Acer Laptop ACPI-WMI Extras [ 142.336029] acer_wmi: No or unsupported WMI interface, unable to load [ 142.336758] ALSA device list: [ 142.336760] No soundcards found. [ 142.336764] oprofile: using NMI interrupt. [ 142.336861] netem: version 1.3 [ 142.336863] Netfilter messages via NETLINK v0.30. [ 142.336914] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 142.338085] ctnetlink v0.93: registering with nfnetlink. [ 142.338140] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 142.338142] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 142.338584] xt_time: kernel timezone is -0000 [ 142.340925] ip_tables: (C) 2000-2006 Netfilter Core Team [ 142.341114] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [ 142.341145] arp_tables: (C) 2002 David S. Miller [ 142.341214] TCP bic registered [ 142.341216] TCP cubic registered [ 142.341218] TCP westwood registered [ 142.341220] TCP highspeed registered [ 142.341222] TCP hybla registered [ 142.341223] TCP htcp registered [ 142.341225] TCP vegas registered [ 142.341227] TCP veno registered [ 142.341229] TCP scalable registered [ 142.341230] TCP lp registered [ 142.341232] TCP yeah registered [ 142.341234] TCP illinois registered [ 142.341235] Initializing XFRM netlink socket [ 142.342165] NET: Registered protocol family 10 [ 142.350632] IPv6 over IPv4 tunneling driver [ 142.353490] NET: Registered protocol family 17 [ 142.353505] NET: Registered protocol family 15 [ 142.353720] Bridge firewalling registered [ 142.353739] Ebtables v2.0 registered [ 142.353886] [ 142.353887] printing PIC contents [ 142.353892] ... PIC IMR: ffff [ 142.353896] ... PIC IRR: 0c21 [ 142.353906] ... PIC ISR: 0000 [ 142.353910] ... PIC ELCR: 0c20 [ 142.353915] printing local APIC contents on CPU#0/0: [ 142.353917] ... APIC ID: 00000000 (0) [ 142.353918] ... APIC VERSION: 00060015 [ 142.353920] ... APIC TASKPRI: 00000000 (00) [ 142.353921] ... APIC PROCPRI: 00000000 [ 142.353922] ... APIC LDR: 01000000 [ 142.353923] ... APIC DFR: ffffffff [ 142.353924] ... APIC SPIV: 000001ff [ 142.353925] ... APIC ISR field: [ 142.353926] 0000000000000000000000000000000000000000000000000000000000000000 [ 142.353929] ... APIC TMR field: [ 142.353930] 0000000000000200000000000010100000000000000000000000000000000000 [ 142.353934] ... APIC IRR field: [ 142.353935] 0000000000000000000000000000000000000000000000000000000000000000 [ 142.353938] ... APIC ESR: 00000000 [ 142.353939] ... APIC ICR: 000000ef [ 142.353940] ... APIC ICR2: 15000000 [ 142.353941] ... APIC LVTT: 000000ef [ 142.353942] ... APIC LVTPC: 00000400 [ 142.353943] ... APIC LVT0: 00010700 [ 142.353944] ... APIC LVT1: 00000400 [ 142.353945] ... APIC LVTERR: 000000fe [ 142.353946] ... APIC TMICT: 0000206a [ 142.353947] ... APIC TMCCT: 000012cf [ 142.353948] ... APIC TDCR: 00000003 [ 142.353949] [ 142.353951] number of MP IRQ sources: 15. [ 142.353953] number of IO-APIC #0 registers: 24. [ 142.353954] number of IO-APIC #2 registers: 24. [ 142.353956] number of IO-APIC #3 registers: 24. [ 142.353958] testing the IO APIC....................... [ 142.353966] [ 142.353967] IO APIC #0...... [ 142.353968] .... register #00: 00000000 [ 142.353970] ....... : physical APIC id: 00 [ 142.353971] ....... : Delivery Type: 0 [ 142.353973] ....... : LTS : 0 [ 142.353974] .... register #01: 00170020 [ 142.353975] ....... : max redirection entries: 17 [ 142.353977] ....... : PRQ implemented: 0 [ 142.353978] ....... : IO APIC version: 20 [ 142.353980] .... IRQ redirection table: [ 142.353981] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 142.353986] 00 00 1 0 0 0 0 0 0 00 [ 142.353993] 01 00 0 0 0 0 0 0 0 31 [ 142.353999] 02 00 0 0 0 0 0 0 0 30 [ 142.354005] 03 00 0 0 0 0 0 0 0 33 [ 142.354010] 04 00 0 0 0 0 0 0 0 34 [ 142.354016] 05 00 0 0 0 0 0 0 0 35 [ 142.354022] 06 00 1 0 0 0 0 0 0 36 [ 142.354027] 07 00 0 0 0 0 0 0 0 37 [ 142.354033] 08 00 0 0 0 0 0 0 0 38 [ 142.354039] 09 00 0 1 0 0 0 0 0 39 [ 142.354045] 0a 00 0 0 0 0 0 0 0 3A [ 142.354050] 0b 00 0 0 0 0 0 0 0 3B [ 142.354056] 0c 00 0 0 0 0 0 0 0 3C [ 142.354062] 0d 00 0 0 0 0 0 0 0 3D [ 142.354067] 0e 00 0 0 0 0 0 0 0 3E [ 142.354073] 0f 00 0 0 0 0 0 0 0 3F [ 142.354080] 10 00 0 1 0 1 0 0 0 29 [ 142.354086] 11 00 1 1 0 1 0 0 0 41 [ 142.354093] 12 00 0 1 0 1 0 0 0 6C [ 142.354099] 13 00 0 1 0 1 0 0 0 99 [ 142.354106] 14 00 1 0 0 0 0 0 0 00 [ 142.354112] 15 00 1 0 0 0 0 0 0 00 [ 142.354118] 16 00 1 0 0 0 0 0 0 00 [ 142.354124] 17 00 0 1 0 1 0 0 0 74 [ 142.354129] [ 142.354130] IO APIC #2...... [ 142.354132] .... register #00: 02000000 [ 142.354133] ....... : physical APIC id: 02 [ 142.354134] ....... : Delivery Type: 0 [ 142.354136] ....... : LTS : 0 [ 142.354137] .... register #01: 00178020 [ 142.354138] ....... : max redirection entries: 17 [ 142.354140] ....... : PRQ implemented: 1 [ 142.354141] ....... : IO APIC version: 20 [ 142.354143] .... register #02: 02000000 [ 142.354144] ....... : arbitration: 02 [ 142.354146] .... register #03: 00000001 [ 142.354147] ....... : Boot DT : 1 [ 142.354148] .... IRQ redirection table: [ 142.354149] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 142.354152] 00 00 1 0 0 0 0 0 0 00 [ 142.354157] 01 00 1 0 0 0 0 0 0 00 [ 142.354161] 02 00 1 0 0 0 0 0 0 00 [ 142.354166] 03 00 1 0 0 0 0 0 0 00 [ 142.354170] 04 00 1 0 0 0 0 0 0 00 [ 142.354175] 05 00 1 0 0 0 0 0 0 00 [ 142.354179] 06 00 1 0 0 0 0 0 0 00 [ 142.354183] 07 00 1 0 0 0 0 0 0 00 [ 142.354188] 08 00 1 0 0 0 0 0 0 00 [ 142.354192] 09 00 1 0 0 0 0 0 0 00 [ 142.354197] 0a 00 1 0 0 0 0 0 0 00 [ 142.354201] 0b 00 1 0 0 0 0 0 0 00 [ 142.354205] 0c 00 1 0 0 0 0 0 0 00 [ 142.354210] 0d 00 1 0 0 0 0 0 0 00 [ 142.354214] 0e 00 1 0 0 0 0 0 0 00 [ 142.354219] 0f 00 1 0 0 0 0 0 0 00 [ 142.354223] 10 00 1 0 0 0 0 0 0 00 [ 142.354227] 11 00 1 0 0 0 0 0 0 00 [ 142.354232] 12 00 1 0 0 0 0 0 0 00 [ 142.354236] 13 00 1 0 0 0 0 0 0 00 [ 142.354241] 14 00 1 0 0 0 0 0 0 00 [ 142.354245] 15 00 1 0 0 0 0 0 0 00 [ 142.354250] 16 00 1 0 0 0 0 0 0 00 [ 142.354254] 17 00 1 0 0 0 0 0 0 00 [ 142.354259] [ 142.354260] IO APIC #3...... [ 142.354262] .... register #00: 03000000 [ 142.354263] ....... : physical APIC id: 03 [ 142.354264] ....... : Delivery Type: 0 [ 142.354266] ....... : LTS : 0 [ 142.354267] .... register #01: 00178020 [ 142.354268] ....... : max redirection entries: 17 [ 142.354270] ....... : PRQ implemented: 1 [ 142.354271] ....... : IO APIC version: 20 [ 142.354273] .... register #02: 03000000 [ 142.354274] ....... : arbitration: 03 [ 142.354275] .... register #03: 00000001 [ 142.354277] ....... : Boot DT : 1 [ 142.354278] .... IRQ redirection table: [ 142.354279] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 142.354282] 00 00 1 0 0 0 0 0 0 00 [ 142.354287] 01 00 1 0 0 0 0 0 0 00 [ 142.354291] 02 00 1 0 0 0 0 0 0 00 [ 142.354296] 03 00 1 0 0 0 0 0 0 00 [ 142.354300] 04 00 1 0 0 0 0 0 0 00 [ 142.354304] 05 00 1 0 0 0 0 0 0 00 [ 142.354309] 06 00 1 0 0 0 0 0 0 00 [ 142.354313] 07 00 1 0 0 0 0 0 0 00 [ 142.354318] 08 00 1 0 0 0 0 0 0 00 [ 142.354322] 09 00 1 0 0 0 0 0 0 00 [ 142.354327] 0a 00 1 0 0 0 0 0 0 00 [ 142.354331] 0b 00 1 0 0 0 0 0 0 00 [ 142.354336] 0c 00 1 0 0 0 0 0 0 00 [ 142.354340] 0d 00 1 0 0 0 0 0 0 00 [ 142.354344] 0e 00 1 0 0 0 0 0 0 00 [ 142.354349] 0f 00 1 0 0 0 0 0 0 00 [ 142.354353] 10 00 1 0 0 0 0 0 0 00 [ 142.354358] 11 00 1 0 0 0 0 0 0 00 [ 142.354362] 12 00 1 0 0 0 0 0 0 00 [ 142.354367] 13 00 1 0 0 0 0 0 0 00 [ 142.354371] 14 00 1 0 0 0 0 0 0 00 [ 142.354375] 15 00 1 0 0 0 0 0 0 00 [ 142.354380] 16 00 1 0 0 0 0 0 0 00 [ 142.354384] 17 00 1 0 0 0 0 0 0 00 [ 142.354387] IRQ to pin mappings: [ 142.354389] IRQ0 -> 0:2 [ 142.354391] IRQ1 -> 0:1 [ 142.354393] IRQ3 -> 0:3 [ 142.354395] IRQ4 -> 0:4 [ 142.354397] IRQ5 -> 0:5 [ 142.354399] IRQ6 -> 0:6 [ 142.354401] IRQ7 -> 0:7 [ 142.354403] IRQ8 -> 0:8 [ 142.354405] IRQ9 -> 0:9 [ 142.354407] IRQ10 -> 0:10 [ 142.354409] IRQ11 -> 0:11 [ 142.354411] IRQ12 -> 0:12 [ 142.354413] IRQ13 -> 0:13 [ 142.354415] IRQ14 -> 0:14 [ 142.354417] IRQ15 -> 0:15 [ 142.354419] IRQ16 -> 0:16 [ 142.354421] IRQ17 -> 0:17 [ 142.354423] IRQ18 -> 0:18 [ 142.354425] IRQ19 -> 0:19 [ 142.354427] IRQ23 -> 0:23 [ 142.354437] .................................... done. [ 142.355076] PM: Hibernation image not present or could not be loaded. [ 142.355103] registered taskstats version 1 [ 142.356828] Magic number: 7:15:32 [ 142.356836] block sdd1: hash matches [ 142.356918] tty ttydf: hash matches [ 142.418218] sd 6:0:0:0: [sdb] Write Protect is off [ 142.418220] sd 6:0:0:0: [sdb] Mode Sense: 73 00 00 08 [ 142.421580] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 142.429307] sd 6:0:3:0: [sde] Attached SCSI disk [ 142.432561] sd 6:0:1:0: [sdc] Attached SCSI disk [ 142.433896] sd 6:0:7:0: [sdi] Attached SCSI disk [ 142.435832] sd 6:0:2:0: [sdd] Attached SCSI disk [ 142.438548] sd 6:0:5:0: [sdg] Attached SCSI disk [ 142.473452] sd 6:0:6:0: [sdh] Attached SCSI disk [ 142.512379] sd 6:0:9:0: [sdk] Attached SCSI disk [ 142.512852] sd 6:0:8:0: [sdj] Attached SCSI disk [ 142.517727] sd 6:0:10:0: [sdl] Attached SCSI disk [ 142.539851] sdb: sdb1 sdb2 sdb3 [ 143.416598] rtc_cmos 00:08: setting system clock to 2011-08-06 15:02:44 UTC (1312642964) [ 143.416633] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 143.450948] IP-Config: Complete: [ 143.454457] device=eth0, addr=192.168.1.78, mask=255.255.255.0, gw=192.168.1.1, [ 143.462417] host=lkp-ne02, domain=, nis-domain=(none) [ 143.466989] ehci_hcd 0000:00:1d.7: port 1 full speed --> companion [ 143.466997] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 143.467006] hub 2-0:1.0: port 1 not reset yet, waiting 50ms [ 143.467013] usb usb5: wakeup_rh (auto-start) [ 143.494966] , [ 143.494967] bootserver=192.168.1.11, rootserver=192.168.1.11, rootpath= [ 143.517678] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 143.518413] sd 6:0:0:0: [sdb] Attached SCSI disk [ 143.520242] sd 6:0:4:0: [sdf] Attached SCSI disk [ 143.536748] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 143.548929] uhci_hcd 0000:00:1d.0: port 1 portsc 0093,00 [ 143.554511] hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 143.606378] sd 6:0:11:0: [sdm] Attached SCSI disk [ 143.664269] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 143.679539] md: Waiting for all devices to be available before autodetect [ 143.686616] md: If you don't use raid, use raid=noautodetect [ 143.693311] md: Autodetecting RAID arrays. [ 143.697680] md: Scanned 0 and added 0 devices. [ 143.702389] md: autorun ... [ 143.705455] md: ... autorun DONE. [ 143.715923] VFS: Mounted root (nfs filesystem) on device 0:16. [ 143.722043] debug: unmapping init memory ffffffff81efa000..ffffffff821aa000 [ 143.773976] usb 5-1: new full speed USB device number 2 using uhci_hcd [ 143.837810] stty used greatest stack depth: 4624 bytes left [ 143.869093] uname used greatest stack depth: 3728 bytes left [ 143.900741] usb 5-1: ep0 maxpacket = 8 [ 143.916477] sh used greatest stack depth: 3696 bytes left [ 143.921927] usb 5-1: udev 2, busnum 5, minor = 513 [ 143.921929] usb 5-1: New USB device found, idVendor=0557, idProduct=8021 [ 143.921931] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 143.922409] usb 5-1: usb_probe_device [ 143.922412] usb 5-1: configuration #1 chosen from 1 choice [ 143.924932] usb 5-1: adding 5-1:1.0 (config #1, interface 0) [ 143.925068] hub 5-1:1.0: usb_probe_interface [ 143.925070] hub 5-1:1.0: usb_probe_interface - got id [ 143.925072] hub 5-1:1.0: USB hub found [ 143.926911] hub 5-1:1.0: 4 ports detected [ 143.926914] hub 5-1:1.0: standalone hub [ 143.926915] hub 5-1:1.0: individual port power switching [ 143.926917] hub 5-1:1.0: individual port over-current protection [ 143.926919] hub 5-1:1.0: power on to power good time: 100ms [ 143.928849] hub 5-1:1.0: local power source is good [ 143.928852] hub 5-1:1.0: enabling power on all ports [ 143.932925] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '002' [ 143.932961] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0050 [ 143.932971] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 001030 0 ACK POWER sig=se0 OCC OC [ 143.932976] hub 1-0:1.0: over-current change on port 4 [ 144.033303] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 144.033639] hub 5-1:1.0: port 1: status 0301 change 0001 [ 144.047232] kworker/u:11 used greatest stack depth: 3384 bytes left [ 144.134051] hub 1-0:1.0: over-current condition on port 4 [ 144.139750] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 128, phase 0, 12 us [ 144.148082] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001030 0 ACK POWER sig=se0 OCC OC [ 144.157090] hub 1-0:1.0: over-current change on port 6 [ 144.262743] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 144.370368] hub 1-0:1.0: over-current condition on port 6 [ 144.376073] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0002 [ 144.381864] hub 5-1:1.0: state 7 ports 4 chg 0002 evt 0000 [ 144.388673] hub 5-1:1.0: port 1, status 0301, change 0000, 1.5 Mb/s [ 144.462481] usb 5-1.1: new low speed USB device number 3 using uhci_hcd [ 144.600136] usb 5-1.1: skipped 1 descriptor after interface [ 144.606014] usb 5-1.1: skipped 1 descriptor after interface [ 144.611903] usb 5-1.1: skipped 1 descriptor after interface [ 144.623062] usb 5-1.1: default language 0x0409 [ 144.653984] usb 5-1.1: udev 3, busnum 5, minor = 514 [ 144.659574] usb 5-1.1: New USB device found, idVendor=0557, idProduct=2261 [ 144.666858] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 144.674761] usb 5-1.1: Product: CS1716A V1.0.098 [ 144.679744] usb 5-1.1: Manufacturer: ATEN International Co. Ltd [ 144.687552] usb 5-1.1: usb_probe_device [ 144.691700] usb 5-1.1: configuration #1 chosen from 1 choice [ 144.702299] usb 5-1.1: adding 5-1.1:1.0 (config #1, interface 0) [ 144.708944] usbserial_generic 5-1.1:1.0: usb_probe_interface [ 144.714896] usbserial_generic 5-1.1:1.0: usb_probe_interface - got id [ 144.721848] usbhid 5-1.1:1.0: usb_probe_interface [ 144.726835] usbhid 5-1.1:1.0: usb_probe_interface - got id [ 144.757413] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input3 [ 144.770216] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 8, phase 4, 118 us [ 144.778713] generic-usb 0003:0557:2261.0001: input: USB HID v1.00 Keyboard [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-1.1/input0 [ 144.792849] usb 5-1.1: adding 5-1.1:1.1 (config #1, interface 1) [ 144.799957] usbserial_generic 5-1.1:1.1: usb_probe_interface [ 144.805895] usbserial_generic 5-1.1:1.1: usb_probe_interface - got id [ 144.812731] usbhid 5-1.1:1.1: usb_probe_interface [ 144.817697] usbhid 5-1.1:1.1: usb_probe_interface - got id [ 144.856173] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.1/input/input4 [ 144.868922] uhci_hcd 0000:00:1d.0: reserve dev 3 ep82-INT, period 8, phase 4, 118 us [ 144.877831] generic-usb 0003:0557:2261.0002: input: USB HID v1.00 Device [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-1.1/input1 [ 144.892278] usb 5-1.1: adding 5-1.1:1.2 (config #1, interface 2) [ 144.899064] usbserial_generic 5-1.1:1.2: usb_probe_interface [ 144.904989] usbserial_generic 5-1.1:1.2: usb_probe_interface - got id [ 144.911717] usbhid 5-1.1:1.2: usb_probe_interface [ 144.916676] usbhid 5-1.1:1.2: usb_probe_interface - got id [ 144.943915] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.2/input/input5 [ 144.956898] generic-usb 0003:0557:2261.0003: input: USB HID v1.10 Mouse [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-1.1/input2 [ 144.970717] /c/wfg/linux-next/drivers/usb/core/inode.c: creating file '003' [ 146.466370] mount.nfs used greatest stack depth: 3184 bytes left [ 146.777978] svc: failed to register lockdv1 RPC service (errno 97). [ 146.786963] mount.nfs used greatest stack depth: 3104 bytes left [ 147.170757] device fsid b9873b81-a187-4a3e-a8a2-e06b4ac7ae99 devid 1 transid 7 /dev/sdc1 [ 147.399709] device fsid 5dbb5bb1-c5da-461b-af0e-26271628ca9d devid 1 transid 7 /dev/sdd1 [ 147.629265] device fsid 95098bbd-4f58-426e-a13e-a9700f1ed6be devid 1 transid 7 /dev/sde1 [ 147.836741] device fsid 87a22860-d14c-4d51-968b-10a65497ad6a devid 1 transid 7 /dev/sdf1 [ 148.107952] device fsid f8dc4374-415f-4113-a429-51cd3ea57dc7 devid 1 transid 7 /dev/sdg1 [ 148.375222] device fsid a4a09ec2-e4d6-466b-9775-a6f2b2bcd700 devid 1 transid 7 /dev/sdh1 [ 148.661293] device fsid fe4e12df-6fdf-40b8-80eb-6695719d0c9d devid 1 transid 7 /dev/sdi1 [ 148.797202] device fsid ebd3fde0-30e2-4bb8-8f37-fc1cb7e76d1f devid 1 transid 7 /dev/sdj1 [ 148.886779] device fsid 72c93027-7ecf-49b9-a4c3-48a1cfbea190 devid 1 transid 7 /dev/sdk1 [ 148.973406] device fsid bd2986d9-1043-45a9-a8ff-0291937ff1db devid 1 transid 7 /dev/sdl1 [ 152.424616] eth0: no IPv6 routers present