[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.37-rc8-dt5+ (wfg@bee) (gcc version 4.5.0 (GCC) ) #395 SMP Fri Dec 31 09:08:10 CST 2010 [ 0.000000] Command line: run=/home/wfg/ioless-balance_dirty_pages/test-each-fs.sh debug sched_debug apic=debug panic=10 hung_task_panic=1 softlockup_panic=1 unknown_nmi_panic=1 nmi_watchdog=panic,lapic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 netconsole=@:/eth0,6666@192.168.1.11/00:30:48:fe:19:95 ip=192.168.1.69:192.168.1.11:192.168.1.1:255.255.255.0:lkp-ws02:eth0:none nfsroot=192.168.1.11:/nfsroot/wfg,tcp,v3,rsize=524288,wsize=524288 rw BOOT_IMAGE=x86_64/vmlinuz [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable) [ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf30b000 (usable) [ 0.000000] BIOS-e820: 00000000bf30b000 - 00000000bf38b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf38b000 - 00000000bf3a1000 (reserved) [ 0.000000] BIOS-e820: 00000000bf3a1000 - 00000000bf3a2000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf3a2000 - 00000000bf3b3000 (reserved) [ 0.000000] BIOS-e820: 00000000bf3b3000 - 00000000bf3b6000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf3b6000 - 00000000bf3dd000 (reserved) [ 0.000000] BIOS-e820: 00000000bf3dd000 - 00000000bf3de000 (usable) [ 0.000000] BIOS-e820: 00000000bf3de000 - 00000000bf3df000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf3df000 - 00000000bf414000 (reserved) [ 0.000000] BIOS-e820: 00000000bf414000 - 00000000bf416000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf416000 - 00000000bf418000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf418000 - 00000000bf420000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf420000 - 00000000bf421000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf421000 - 00000000bf423000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf423000 - 00000000bf42b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf42b000 - 00000000bf454000 (reserved) [ 0.000000] BIOS-e820: 00000000bf454000 - 00000000bf657000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf657000 - 00000000bf800000 (usable) [ 0.000000] BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000440000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: X8DTN/X8DTN, BIOS 4.6.3 01/06/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x440000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FC00000000 write-back [ 0.000000] 1 base 0400000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFC0000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes. [ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes. [ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [ffff8800000fcf20] fcf20 [ 0.000000] mpc: fc9f0-fcea4 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000 [ 0.000000] 0000000000 - 00bf800000 page 4k [ 0.000000] kernel direct mapping tables up to bf800000 @ 1fa00000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000440000000 [ 0.000000] 0100000000 - 0440000000 page 4k [ 0.000000] kernel direct mapping tables up to 440000000 @ bd0f9000-bf30b000 [ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 A M I) [ 0.000000] ACPI: XSDT 00000000bf421e18 0008C (v01 A M I ALASKA 01072009 MSFT 00010013) [ 0.000000] ACPI: FACP 00000000bf41fd98 000F4 (v04 A M I ALASKA 01072009 MSFT 00010013) [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20101013/tbfadt-369) [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBF420F40/0x00000000BF420E40, using 32 (20101013/tbfadt-486) [ 0.000000] ACPI: DSDT 00000000bf418018 06059 (v01 A M I ALASKA 00000001 INTL 20051117) [ 0.000000] ACPI: FACS 00000000bf420f40 00040 [ 0.000000] ACPI: APIC 00000000bf41fc18 00130 (v02 A M I ALASKA 01072009 MSFT 00010013) [ 0.000000] ACPI: SSDT 00000000bf415798 006EE (v01 AMICPU PROC 00000001 MSFT 03000001) [ 0.000000] ACPI: MCFG 00000000bf422f18 0003C (v01 A M I OEMMCFG 01072009 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000bf414c98 00228 (v01 A M I AMI SRAT 00000001 AMI. 00000000) [ 0.000000] ACPI: SLIT 00000000bf422e98 00030 (v01 A M I AMI SLIT 00000000 AMI. 00000000) [ 0.000000] ACPI: HPET 00000000bf422e18 00038 (v01 A M I ICH7HPET 01072009 AMI. 00000003) [ 0.000000] ACPI: SPMI 00000000bf422d98 00040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.000000] ACPI: EINJ 00000000bf41fa98 00130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.000000] ACPI: ERST 00000000bf414a18 00210 (v01 AMIER AMI ERST 00000000 00000000) [ 0.000000] ACPI: HEST 00000000bf414f18 000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.000000] ACPI: BERT 00000000bf422d18 00030 (v01 AMI AMI BERT 00000000 00000000) [ 0.000000] ACPI: DMAR 00000000bf415f18 000D4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x12 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x13 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x14 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x15 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x20 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x21 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x22 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x23 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x24 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x25 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x30 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x31 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x32 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x33 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x34 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x35 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 0-c0000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-240000000 [ 0.000000] SRAT: Node 1 PXM 1 240000000-440000000 [ 0.000000] SRAT: Node 0 [0,c0000000) + [100000000,240000000) -> [0,240000000) [ 0.000000] NUMA: Using 30 for the hash shift. [ 0.000000] Initmem setup node 0 0000000000000000-0000000240000000 [ 0.000000] NODE_DATA [000000023fffb000 - 000000023fffffff] [ 0.000000] Initmem setup node 1 0000000240000000-0000000440000000 [ 0.000000] NODE_DATA [000000043fffa000 - 000000043fffefff] [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237e00000-ffff88023edfffff] on node 0 [ 0.000000] [ffffea0007e00000-ffffea000edfffff] PMD -> [ffff880437e00000-ffff88043edfffff] on node 1 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00440000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009c [ 0.000000] 0: 0x00000100 -> 0x000bf30b [ 0.000000] 0: 0x000bf3dd -> 0x000bf3de [ 0.000000] 0: 0x000bf657 -> 0x000bf800 [ 0.000000] 0: 0x00100000 -> 0x00240000 [ 0.000000] 1: 0x00240000 -> 0x00440000 [ 0.000000] On node 0 totalpages: 2094145 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3918 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 765165 pages, LIFO batch:31 [ 0.000000] Normal zone: 17920 pages used for memmap [ 0.000000] Normal zone: 1292800 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 2097152 [ 0.000000] Normal zone: 28672 pages used for memmap [ 0.000000] Normal zone: 2068480 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x20] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x22] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x24] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x30] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x32] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x34] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x21] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x23] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x31] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x33] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x35] enabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec02000] gsi_base[48]) [ 0.000000] IOAPIC[2]: apic_id 3, version 32, address 0xfec02000, GSI 48-71 [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec90000] gsi_base[72]) [ 0.000000] IOAPIC[3]: apic_id 4, version 32, address 0xfec90000, GSI 72-95 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 24 CPUs, 0 hotplug CPUs [ 0.000000] mapped APIC to ffffffffff5fc000 (fee00000) [ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000) [ 0.000000] mapped IOAPIC to ffffffffff5fa000 (fec01000) [ 0.000000] mapped IOAPIC to ffffffffff5f9000 (fec02000) [ 0.000000] mapped IOAPIC to ffffffffff5f8000 (fec90000) [ 0.000000] nr_irqs_gsi: 112 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf30b000 - 00000000bf38b000 [ 0.000000] PM: Registered nosave memory: 00000000bf38b000 - 00000000bf3a1000 [ 0.000000] PM: Registered nosave memory: 00000000bf3a1000 - 00000000bf3a2000 [ 0.000000] PM: Registered nosave memory: 00000000bf3a2000 - 00000000bf3b3000 [ 0.000000] PM: Registered nosave memory: 00000000bf3b3000 - 00000000bf3b6000 [ 0.000000] PM: Registered nosave memory: 00000000bf3b6000 - 00000000bf3dd000 [ 0.000000] PM: Registered nosave memory: 00000000bf3de000 - 00000000bf3df000 [ 0.000000] PM: Registered nosave memory: 00000000bf3df000 - 00000000bf414000 [ 0.000000] PM: Registered nosave memory: 00000000bf414000 - 00000000bf416000 [ 0.000000] PM: Registered nosave memory: 00000000bf416000 - 00000000bf418000 [ 0.000000] PM: Registered nosave memory: 00000000bf418000 - 00000000bf420000 [ 0.000000] PM: Registered nosave memory: 00000000bf420000 - 00000000bf421000 [ 0.000000] PM: Registered nosave memory: 00000000bf421000 - 00000000bf423000 [ 0.000000] PM: Registered nosave memory: 00000000bf423000 - 00000000bf42b000 [ 0.000000] PM: Registered nosave memory: 00000000bf42b000 - 00000000bf454000 [ 0.000000] PM: Registered nosave memory: 00000000bf454000 - 00000000bf657000 [ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ed1c000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:24 nr_node_ids:2 [ 0.000000] PERCPU: Embedded 475 pages/cpu @ffff8800bb800000 s1916096 r8192 d21312 u2097152 [ 0.000000] pcpu-alloc: s1916096 r8192 d21312 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 12 [0] 13 [ 0.000000] pcpu-alloc: [0] 14 [0] 15 [0] 16 [0] 17 [1] 06 [1] 07 [1] 08 [1] 09 [ 0.000000] pcpu-alloc: [1] 10 [1] 11 [1] 18 [1] 19 [1] 20 [1] 21 [1] 22 [1] 23 [ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 4130363 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: run=/home/wfg/ioless-balance_dirty_pages/test-each-fs.sh debug sched_debug apic=debug panic=10 hung_task_panic=1 softlockup_panic=1 unknown_nmi_panic=1 nmi_watchdog=panic,lapic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 netconsole=@:/eth0,6666@192.168.1.11/00:30:48:fe:19:95 ip=192.168.1.69:192.168.1.11:192.168.1.1:255.255.255.0:lkp-ws02:eth0:none nfsroot=192.168.1.11:/nfsroot/wfg,tcp,v3,rsize=524288,wsize=524288 rw BOOT_IMAGE=x86_64/vmlinuz [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 16361144k/17825792k available (10752k kernel code, 1060604k absent, 404044k reserved, 5468k data, 2812k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:2096 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 6335 kB [ 0.000000] per task-struct memory footprint: 2688 bytes [ 0.000000] allocated 167772160 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] ODEBUG: 31 of 31 active objects replaced [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 2799.836 MHz processor. [ 0.000015] Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.67 BogoMIPS (lpj=11199344) [ 0.010960] pid_max: default: 32768 minimum: 301 [ 0.019921] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.032797] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.041764] Mount-cache hash table entries: 256 [ 0.046899] Initializing cgroup subsys debug [ 0.051290] Initializing cgroup subsys ns [ 0.055412] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.064460] Initializing cgroup subsys cpuacct [ 0.069027] Initializing cgroup subsys memory [ 0.073545] Initializing cgroup subsys devices [ 0.078104] Initializing cgroup subsys freezer [ 0.082661] Initializing cgroup subsys blkio [ 0.087151] CPU: Physical Processor ID: 0 [ 0.091277] CPU: Processor Core ID: 0 [ 0.095058] mce: CPU supports 9 MCE banks [ 0.099193] CPU0: Thermal monitoring enabled (TM1) [ 0.104110] using mwait in idle threads. [ 0.108152] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver. [ 0.115757] ... version: 3 [ 0.119881] ... bit width: 48 [ 0.124093] ... generic registers: 4 [ 0.128219] ... value mask: 0000ffffffffffff [ 0.133643] ... max period: 000000007fffffff [ 0.139066] ... fixed-purpose events: 3 [ 0.143192] ... event mask: 000000070000000f [ 0.149708] ACPI: Core revision 20101013 [ 0.175816] ftrace: allocating 33698 entries in 133 pages [ 0.190672] Getting VERSION: 1060015 [ 0.194370] Getting VERSION: 1060015 [ 0.198061] Getting ID: 0 [ 0.200801] Getting ID: 0 [ 0.203527] Setting APIC routing to physical flat [ 0.208346] enabled ExtINT on CPU#0 [ 0.212398] ESR value before enabling vector: 0x00000040 after: 0x00000000 [ 0.219470] ENABLING IO-APIC IRQs [ 0.222903] init IO_APIC IRQs [ 0.225990] 0-0 (apicid-pin) not connected [ 0.230366] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 0.237856] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) [ 0.245345] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) [ 0.252832] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) [ 0.260315] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) [ 0.267798] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) [ 0.275279] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) [ 0.282765] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 0.290251] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0) [ 0.297734] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) [ 0.305388] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) [ 0.313045] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 0.320700] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 0.328355] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) [ 0.336010] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) [ 0.343664] 0-16 0-17 0-18 0-19 0-20 0-21 0-22 0-23 2-0 2-1 2-2 2-3 2-4 2-5 2-6 2-7 2-8 2-9 2-10 2-11 2-12 2-13 2-14 2-15 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 3-0 3-1 3-2 3-3 3-4 3-5 3-6 3-7 3-8 3-9 3-10 3-11 3-12 3-13 3-14 3-15 3-16 3-17 3-18 3-19 3-20 3-21 3-22 3-23 4-0 4-1 4-2 4-3 4-4 4-5 4-6 4-7 4-8 4-9 4-10 4-11 4-12 4-13 4-14 4-15 4-16 4-17 4-18 4-19 4-20 4-21 4-22 4-23 (apicid-pin) not connected [ 0.385286] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.431004] CPU0: Intel(R) Xeon(R) CPU X5660 @ 2.80GHz stepping 01 [ 0.438384] Using local APIC timer interrupts. [ 0.438384] calibrating APIC timer ... [ 0.551701] ... lapic delta = 833352 [ 0.555384] ... PM-Timer delta = 357950 [ 0.559329] ... PM-Timer result ok [ 0.562840] ..... delta 833352 [ 0.566008] ..... mult: 35789958 [ 0.569346] ..... calibration result: 533345 [ 0.573723] ..... CPU clock speed is 2800.0253 MHz. [ 0.578705] ..... host bus clock speed is 133.1345 MHz. [ 0.584710] lockdep: fixing up alternatives. [ 0.589186] Booting Node 0, Processors #1masked ExtINT on CPU#1 [ 0.704363] lockdep: fixing up alternatives. [ 0.708848] #2masked ExtINT on CPU#2 [ 0.820025] lockdep: fixing up alternatives. [ 0.824441] #3masked ExtINT on CPU#3 [ 0.935825] lockdep: fixing up alternatives. [ 0.940251] #4masked ExtINT on CPU#4 [ 1.051631] lockdep: fixing up alternatives. [ 1.056051] #5masked ExtINT on CPU#5 [ 1.167688] lockdep: fixing up alternatives. [ 1.172110] Ok. [ 1.174063] Booting Node 1, Processors #6masked ExtINT on CPU#6 [ 1.290810] TSC synchronization [CPU#0 -> CPU#6]: [ 1.295682] Measured 895 cycles TSC warp between CPUs, turning off TSC clock. [ 0.012000] Marking TSC unstable due to check_tsc_sync_source failed [ 0.984649] lockdep: fixing up alternatives. [ 0.988036] #7masked ExtINT on CPU#7 [ 1.084748] lockdep: fixing up alternatives. [ 1.088033] #8masked ExtINT on CPU#8 [ 1.180664] lockdep: fixing up alternatives. [ 1.184035] #9masked ExtINT on CPU#9 [ 1.276628] lockdep: fixing up alternatives. [ 1.280036] #10masked ExtINT on CPU#10 [ 1.372665] lockdep: fixing up alternatives. [ 1.376035] #11masked ExtINT on CPU#11 [ 1.472452] lockdep: fixing up alternatives. [ 1.476035] Ok. [ 1.477988] Booting Node 0, Processors #12masked ExtINT on CPU#12 [ 1.576497] lockdep: fixing up alternatives. [ 1.580038] #13masked ExtINT on CPU#13 [ 1.672463] lockdep: fixing up alternatives. [ 1.676034] #14masked ExtINT on CPU#14 [ 1.768418] lockdep: fixing up alternatives. [ 1.772036] #15masked ExtINT on CPU#15 [ 1.864373] lockdep: fixing up alternatives. [ 1.868039] #16masked ExtINT on CPU#16 [ 1.960468] lockdep: fixing up alternatives. [ 1.964035] #17masked ExtINT on CPU#17 [ 2.056617] lockdep: fixing up alternatives. [ 2.060039] Ok. [ 2.061986] Booting Node 1, Processors #18masked ExtINT on CPU#18 [ 2.160573] lockdep: fixing up alternatives. [ 2.164032] #19masked ExtINT on CPU#19 [ 2.256561] lockdep: fixing up alternatives. [ 2.260029] #20masked ExtINT on CPU#20 [ 2.352566] lockdep: fixing up alternatives. [ 2.356033] #21masked ExtINT on CPU#21 [ 2.448564] lockdep: fixing up alternatives. [ 2.452032] #22masked ExtINT on CPU#22 [ 2.544554] lockdep: fixing up alternatives. [ 2.548029] #23 Ok. [ 0.012000] masked ExtINT on CPU#23 [ 2.644093] Brought up 24 CPUs [ 2.647257] Total of 24 processors activated (134404.43 BogoMIPS). [ 2.648048] Testing NMI watchdog ... OK. [ 2.736262] CPU0 attaching sched-domain: [ 2.740004] domain 0: span 0,12 level SIBLING [ 2.744002] groups: 0 (cpu_power = 589) 12 (cpu_power = 589) [ 2.750256] domain 1: span 0-5,12-17 level MC [ 2.756002] groups: 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) [ 2.770577] domain 2: span 0-23 level NODE [ 2.776002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 2.784304] CPU1 attaching sched-domain: [ 2.788011] domain 0: span 1,13 level SIBLING [ 2.792002] groups: 1 (cpu_power = 589) 13 (cpu_power = 589) [ 2.798256] domain 1: span 0-5,12-17 level MC [ 2.804002] groups: 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) [ 2.820002] domain 2: span 0-23 level NODE [ 2.824002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 2.832305] CPU2 attaching sched-domain: [ 2.836002] domain 0: span 2,14 level SIBLING [ 2.840002] groups: 2 (cpu_power = 589) 14 (cpu_power = 589) [ 2.846249] domain 1: span 0-5,12-17 level MC [ 2.852002] groups: 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) [ 2.868300] domain 2: span 0-23 level NODE [ 2.872002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 2.880305] CPU3 attaching sched-domain: [ 2.884002] domain 0: span 3,15 level SIBLING [ 2.888002] groups: 3 (cpu_power = 589) 15 (cpu_power = 589) [ 2.895873] domain 1: span 0-5,12-17 level MC [ 2.900002] groups: 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) [ 2.916303] domain 2: span 0-23 level NODE [ 2.920002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 2.928303] CPU4 attaching sched-domain: [ 2.932002] domain 0: span 4,16 level SIBLING [ 2.936002] groups: 4 (cpu_power = 589) 16 (cpu_power = 589) [ 2.944003] domain 1: span 0-5,12-17 level MC [ 2.948002] groups: 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) [ 2.964301] domain 2: span 0-23 level NODE [ 2.968002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 2.976305] CPU5 attaching sched-domain: [ 2.980002] domain 0: span 5,17 level SIBLING [ 2.984002] groups: 5 (cpu_power = 589) 17 (cpu_power = 589) [ 2.992002] domain 1: span 0-5,12-17 level MC [ 2.996002] groups: 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) [ 3.012301] domain 2: span 0-23 level NODE [ 3.016002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.024303] CPU6 attaching sched-domain: [ 3.028002] domain 0: span 6,18 level SIBLING [ 3.032002] groups: 6 (cpu_power = 589) 18 (cpu_power = 589) [ 3.040301] domain 1: span 6-11,18-23 level MC [ 3.044002] groups: 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) [ 3.060301] domain 2: span 0-23 level NODE [ 3.064002] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.072303] CPU7 attaching sched-domain: [ 3.076002] domain 0: span 7,19 level SIBLING [ 3.082300] groups: 7 (cpu_power = 589) 19 (cpu_power = 589) [ 3.088300] domain 1: span 6-11,18-23 level MC [ 3.092002] groups: 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) [ 3.108300] domain 2: span 0-23 level NODE [ 3.114039] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.122087] CPU8 attaching sched-domain: [ 3.124002] domain 0: span 8,20 level SIBLING [ 3.130301] groups: 8 (cpu_power = 589) 20 (cpu_power = 589) [ 3.136301] domain 1: span 6-11,18-23 level MC [ 3.140002] groups: 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) [ 3.158082] domain 2: span 0-23 level NODE [ 3.162039] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.170077] CPU9 attaching sched-domain: [ 3.172002] domain 0: span 9,21 level SIBLING [ 3.178301] groups: 9 (cpu_power = 589) 21 (cpu_power = 589) [ 3.184302] domain 1: span 6-11,18-23 level MC [ 3.190386] groups: 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) [ 3.206576] domain 2: span 0-23 level NODE [ 3.210040] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.219013] CPU10 attaching sched-domain: [ 3.220002] domain 0: span 10,22 level SIBLING [ 3.228002] groups: 10 (cpu_power = 589) 22 (cpu_power = 589) [ 3.234258] domain 1: span 6-11,18-23 level MC [ 3.238386] groups: 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) [ 3.254577] domain 2: span 0-23 level NODE [ 3.260002] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.268005] CPU11 attaching sched-domain: [ 3.272002] domain 0: span 11,23 level SIBLING [ 3.276002] groups: 11 (cpu_power = 589) 23 (cpu_power = 589) [ 3.282258] domain 1: span 6-11,18-23 level MC [ 3.288002] groups: 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) [ 3.304300] domain 2: span 0-23 level NODE [ 3.308002] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.316306] CPU12 attaching sched-domain: [ 3.320002] domain 0: span 0,12 level SIBLING [ 3.324002] groups: 12 (cpu_power = 589) 0 (cpu_power = 589) [ 3.331786] domain 1: span 0-5,12-17 level MC [ 3.336002] groups: 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) [ 3.352301] domain 2: span 0-23 level NODE [ 3.356002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.364305] CPU13 attaching sched-domain: [ 3.368002] domain 0: span 1,13 level SIBLING [ 3.372002] groups: 13 (cpu_power = 589) 1 (cpu_power = 589) [ 3.380002] domain 1: span 0-5,12-17 level MC [ 3.384002] groups: 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) [ 3.400303] domain 2: span 0-23 level NODE [ 3.404002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.412305] CPU14 attaching sched-domain: [ 3.416002] domain 0: span 2,14 level SIBLING [ 3.420002] groups: 14 (cpu_power = 589) 2 (cpu_power = 589) [ 3.428301] domain 1: span 0-5,12-17 level MC [ 3.432002] groups: 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) [ 3.448301] domain 2: span 0-23 level NODE [ 3.452002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.460305] CPU15 attaching sched-domain: [ 3.464002] domain 0: span 3,15 level SIBLING [ 3.470298] groups: 15 (cpu_power = 589) 3 (cpu_power = 589) [ 3.476301] domain 1: span 0-5,12-17 level MC [ 3.480002] groups: 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) [ 3.496303] domain 2: span 0-23 level NODE [ 3.500002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.510087] CPU16 attaching sched-domain: [ 3.512003] domain 0: span 4,16 level SIBLING [ 3.518298] groups: 16 (cpu_power = 589) 4 (cpu_power = 589) [ 3.524303] domain 1: span 0-5,12-17 level MC [ 3.528002] groups: 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) [ 3.544300] domain 2: span 0-23 level NODE [ 3.550039] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.558086] CPU17 attaching sched-domain: [ 3.560002] domain 0: span 5,17 level SIBLING [ 3.566298] groups: 17 (cpu_power = 589) 5 (cpu_power = 589) [ 3.572303] domain 1: span 0-5,12-17 level MC [ 3.576001] groups: 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) [ 3.594082] domain 2: span 0-23 level NODE [ 3.598041] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.606077] CPU18 attaching sched-domain: [ 3.608002] domain 0: span 6,18 level SIBLING [ 3.612001] groups: 18 (cpu_power = 589) 6 (cpu_power = 589) [ 3.618170] domain 1: span 6-11,18-23 level MC [ 3.624002] groups: 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) [ 3.640002] domain 2: span 0-23 level NODE [ 3.644001] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.652303] CPU19 attaching sched-domain: [ 3.656002] domain 0: span 7,19 level SIBLING [ 3.660001] groups: 19 (cpu_power = 589) 7 (cpu_power = 589) [ 3.667786] domain 1: span 6-11,18-23 level MC [ 3.672001] groups: 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) [ 3.688300] domain 2: span 0-23 level NODE [ 3.692001] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.700306] CPU20 attaching sched-domain: [ 3.704002] domain 0: span 8,20 level SIBLING [ 3.708001] groups: 20 (cpu_power = 589) 8 (cpu_power = 589) [ 3.716303] domain 1: span 6-11,18-23 level MC [ 3.720002] groups: 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) [ 3.736301] domain 2: span 0-23 level NODE [ 3.740002] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.748304] CPU21 attaching sched-domain: [ 3.752002] domain 0: span 9,21 level SIBLING [ 3.758300] groups: 21 (cpu_power = 589) 9 (cpu_power = 589) [ 3.764301] domain 1: span 6-11,18-23 level MC [ 3.768002] groups: 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) [ 3.784302] domain 2: span 0-23 level NODE [ 3.790041] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.798078] CPU22 attaching sched-domain: [ 3.800002] domain 0: span 10,22 level SIBLING [ 3.806386] groups: 22 (cpu_power = 589) 10 (cpu_power = 589) [ 3.812303] domain 1: span 6-11,18-23 level MC [ 3.818386] groups: 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) [ 3.834575] domain 2: span 0-23 level NODE [ 3.838039] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.847013] CPU23 attaching sched-domain: [ 3.848002] domain 0: span 11,23 level SIBLING [ 3.856001] groups: 23 (cpu_power = 589) 11 (cpu_power = 589) [ 3.862256] domain 1: span 6-11,18-23 level MC [ 3.866386] groups: 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) [ 3.882663] domain 2: span 0-23 level NODE [ 3.886032] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.896761] kworker/u:0 used greatest stack depth: 6080 bytes left [ 3.903465] kworker/u:0 used greatest stack depth: 5400 bytes left [ 3.920320] xor: automatically using best checksumming function: generic_sse [ 3.944003] generic_sse: 10589.000 MB/sec [ 3.948004] xor: using function: generic_sse (10589.000 MB/sec) [ 3.952090] Time: 10:05:52 Date: 12/31/10 [ 3.956241] NET: Registered protocol family 16 [ 3.964122] ACPI: bus type pci registered [ 3.968146] dca service started, version 1.12.1 [ 3.972082] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) [ 3.976006] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820 [ 4.063744] PCI: Using configuration type 1 for base access [ 4.099003] bio: create slab at 0 [ 4.168014] raid6: int64x1 2305 MB/s [ 4.236018] raid6: int64x2 2895 MB/s [ 4.304007] raid6: int64x4 2269 MB/s [ 4.372012] raid6: int64x8 2253 MB/s [ 4.440008] raid6: sse2x1 6869 MB/s [ 4.508003] raid6: sse2x2 8043 MB/s [ 4.576006] raid6: sse2x4 8929 MB/s [ 4.579862] raid6: using algorithm sse2x4 (8929 MB/s) [ 4.586679] ACPI: EC: Look up EC in DSDT [ 4.592542] \_SB_:_OSC evaluation returned wrong type [ 4.596003] _OSC request data:1 6 [ 4.606608] ACPI: Executed 1 blocks of module-level executable AML code [ 4.696336] ACPI: SSDT 00000000bf416018 01494 (v01 AMI IST 00000001 MSFT 03000001) [ 4.704893] ACPI: Dynamic OEM Table Load: [ 4.708299] ACPI: SSDT (null) 01494 (v01 AMI IST 00000001 MSFT 03000001) [ 4.729351] ACPI: Interpreter enabled [ 4.732003] ACPI: (supports S0 S4 S5) [ 4.737094] ACPI: Using IOAPIC for interrupt routing [ 4.744264] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 4.752206] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 4.761535] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 4.770225] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 4.778141] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 4.804297] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 4.816591] ACPI: No dock devices found. [ 4.820004] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 4.824628] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 4.828484] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 4.832005] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 4.836003] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 4.840003] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff] [ 4.844033] pci 0000:00:00.0: [8086:3406] type 0 class 0x000600 [ 4.848073] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 4.852005] pci 0000:00:00.0: PME# disabled [ 4.856029] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604 [ 4.860068] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 4.864007] pci 0000:00:01.0: PME# disabled [ 4.868033] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604 [ 4.872068] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 4.876004] pci 0000:00:03.0: PME# disabled [ 4.880033] pci 0000:00:05.0: [8086:340c] type 1 class 0x000604 [ 4.884069] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 4.888005] pci 0000:00:05.0: PME# disabled [ 4.892030] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604 [ 4.896066] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 4.900004] pci 0000:00:07.0: PME# disabled [ 4.904032] pci 0000:00:09.0: [8086:3410] type 1 class 0x000604 [ 4.908067] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 4.912005] pci 0000:00:09.0: PME# disabled [ 4.916039] pci 0000:00:13.0: [8086:342d] type 0 class 0x000800 [ 4.920016] pci 0000:00:13.0: reg 10: [mem 0xfbe24000-0xfbe24fff] [ 4.924064] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 4.928004] pci 0000:00:13.0: PME# disabled [ 4.932025] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800 [ 4.936090] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800 [ 4.940090] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800 [ 4.944084] pci 0000:00:14.3: [8086:3438] type 0 class 0x000800 [ 4.948087] pci 0000:00:16.0: [8086:3430] type 0 class 0x000880 [ 4.952018] pci 0000:00:16.0: reg 10: [mem 0xfbe1c000-0xfbe1ffff 64bit] [ 4.956087] pci 0000:00:16.1: [8086:3431] type 0 class 0x000880 [ 4.960017] pci 0000:00:16.1: reg 10: [mem 0xfbe18000-0xfbe1bfff 64bit] [ 4.964087] pci 0000:00:16.2: [8086:3432] type 0 class 0x000880 [ 4.968017] pci 0000:00:16.2: reg 10: [mem 0xfbe14000-0xfbe17fff 64bit] [ 4.972090] pci 0000:00:16.3: [8086:3433] type 0 class 0x000880 [ 4.976018] pci 0000:00:16.3: reg 10: [mem 0xfbe10000-0xfbe13fff 64bit] [ 4.984078] pci 0000:00:16.4: [8086:3429] type 0 class 0x000880 [ 4.988017] pci 0000:00:16.4: reg 10: [mem 0xfbe0c000-0xfbe0ffff 64bit] [ 4.992087] pci 0000:00:16.5: [8086:342a] type 0 class 0x000880 [ 4.996017] pci 0000:00:16.5: reg 10: [mem 0xfbe08000-0xfbe0bfff 64bit] [ 5.000087] pci 0000:00:16.6: [8086:342b] type 0 class 0x000880 [ 5.004018] pci 0000:00:16.6: reg 10: [mem 0xfbe04000-0xfbe07fff 64bit] [ 5.008091] pci 0000:00:16.7: [8086:342c] type 0 class 0x000880 [ 5.012018] pci 0000:00:16.7: reg 10: [mem 0xfbe00000-0xfbe03fff 64bit] [ 5.016095] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03 [ 5.020058] pci 0000:00:1a.0: reg 20: [io 0xf0c0-0xf0df] [ 5.024062] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03 [ 5.028058] pci 0000:00:1a.2: reg 20: [io 0xf0a0-0xf0bf] [ 5.032075] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03 [ 5.036028] pci 0000:00:1a.7: reg 10: [mem 0xfbe23000-0xfbe233ff] [ 5.040097] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 5.044006] pci 0000:00:1a.7: PME# disabled [ 5.048028] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604 [ 5.052077] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 5.056005] pci 0000:00:1c.0: PME# disabled [ 5.060031] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604 [ 5.064076] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 5.068005] pci 0000:00:1c.4: PME# disabled [ 5.072035] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03 [ 5.076058] pci 0000:00:1d.0: reg 20: [io 0xf080-0xf09f] [ 5.080059] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03 [ 5.084057] pci 0000:00:1d.1: reg 20: [io 0xf060-0xf07f] [ 5.088062] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03 [ 5.092058] pci 0000:00:1d.2: reg 20: [io 0xf040-0xf05f] [ 5.096072] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03 [ 5.100027] pci 0000:00:1d.7: reg 10: [mem 0xfbe22000-0xfbe223ff] [ 5.104096] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 5.108005] pci 0000:00:1d.7: PME# disabled [ 5.112028] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 5.116077] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601 [ 5.120097] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO [ 5.124005] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO [ 5.128004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0600 (mask 00ff) [ 5.132004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f) [ 5.136004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 001f) [ 5.140004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0ca0 (mask 000f) [ 5.144052] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106 [ 5.148026] pci 0000:00:1f.2: reg 10: [io 0xf110-0xf117] [ 5.152011] pci 0000:00:1f.2: reg 14: [io 0xf100-0xf103] [ 5.156011] pci 0000:00:1f.2: reg 18: [io 0xf0f0-0xf0f7] [ 5.160011] pci 0000:00:1f.2: reg 1c: [io 0xf0e0-0xf0e3] [ 5.164011] pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f] [ 5.168011] pci 0000:00:1f.2: reg 24: [mem 0xfbe21000-0xfbe217ff] [ 5.172048] pci 0000:00:1f.2: PME# supported from D3hot [ 5.176005] pci 0000:00:1f.2: PME# disabled [ 5.180023] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05 [ 5.184020] pci 0000:00:1f.3: reg 10: [mem 0xfbe20000-0xfbe200ff 64bit] [ 5.188029] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f] [ 5.192108] pci 0000:01:00.0: [8086:10c9] type 0 class 0x000200 [ 5.196017] pci 0000:01:00.0: reg 10: [mem 0xfbaa0000-0xfbabffff] [ 5.200012] pci 0000:01:00.0: reg 14: [mem 0xfba80000-0xfba9ffff] [ 5.204013] pci 0000:01:00.0: reg 18: [io 0xe020-0xe03f] [ 5.208012] pci 0000:01:00.0: reg 1c: [mem 0xfbb44000-0xfbb47fff] [ 5.212032] pci 0000:01:00.0: reg 30: [mem 0xfba60000-0xfba7ffff pref] [ 5.216040] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 5.220005] pci 0000:01:00.0: PME# disabled [ 5.224051] pci 0000:01:00.1: [8086:10c9] type 0 class 0x000200 [ 5.228017] pci 0000:01:00.1: reg 10: [mem 0xfba40000-0xfba5ffff] [ 5.232012] pci 0000:01:00.1: reg 14: [mem 0xfba20000-0xfba3ffff] [ 5.236013] pci 0000:01:00.1: reg 18: [io 0xe000-0xe01f] [ 5.240012] pci 0000:01:00.1: reg 1c: [mem 0xfbb40000-0xfbb43fff] [ 5.244032] pci 0000:01:00.1: reg 30: [mem 0xfba00000-0xfba1ffff pref] [ 5.248039] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 5.256005] pci 0000:01:00.1: PME# disabled [ 5.260021] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 5.264005] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 5.268005] pci 0000:00:01.0: bridge window [mem 0xfba00000-0xfbbfffff] [ 5.272007] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.276053] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 5.280005] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled) [ 5.284005] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 5.288007] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.292054] pci 0000:00:05.0: PCI bridge to [bus 04-04] [ 5.296005] pci 0000:00:05.0: bridge window [io 0xf000-0x0000] (disabled) [ 5.300005] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 5.304007] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.308053] pci 0000:00:07.0: PCI bridge to [bus 05-05] [ 5.312005] pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled) [ 5.316005] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 5.320007] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.324061] pci 0000:06:00.0: [8086:0329] type 1 class 0x000604 [ 5.328022] pci 0000:06:00.0: PXH quirk detected; SHPC device MSI disabled [ 5.332065] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 5.336005] pci 0000:06:00.0: PME# disabled [ 5.340030] pci 0000:06:00.2: [8086:032a] type 1 class 0x000604 [ 5.344022] pci 0000:06:00.2: PXH quirk detected; SHPC device MSI disabled [ 5.348064] pci 0000:06:00.2: PME# supported from D0 D3hot D3cold [ 5.352004] pci 0000:06:00.2: PME# disabled [ 5.356021] pci 0000:00:09.0: PCI bridge to [bus 06-08] [ 5.360005] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 5.364005] pci 0000:00:09.0: bridge window [mem 0xfb700000-0xfb9fffff] [ 5.368007] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.372090] pci 0000:06:00.0: PCI bridge to [bus 07-07] [ 5.376005] pci 0000:06:00.0: bridge window [io 0xf000-0x0000] (disabled) [ 5.380005] pci 0000:06:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 5.384007] pci 0000:06:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.388057] pci 0000:08:01.0: [8086:1229] type 0 class 0x000200 [ 5.392021] pci 0000:08:01.0: reg 10: [mem 0xfb900000-0xfb900fff] [ 5.396013] pci 0000:08:01.0: reg 14: [io 0xd000-0xd03f] [ 5.400013] pci 0000:08:01.0: reg 18: [mem 0xfb800000-0xfb8fffff] [ 5.404043] pci 0000:08:01.0: reg 30: [mem 0xfb700000-0xfb7fffff pref] [ 5.408024] pci 0000:08:01.0: supports D1 D2 [ 5.412002] pci 0000:08:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 5.416015] pci 0000:08:01.0: PME# disabled [ 5.420060] pci 0000:06:00.2: PCI bridge to [bus 08-08] [ 5.424005] pci 0000:06:00.2: bridge window [io 0xd000-0xdfff] [ 5.428006] pci 0000:06:00.2: bridge window [mem 0xfb700000-0xfb9fffff] [ 5.432007] pci 0000:06:00.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.436085] pci 0000:09:00.0: [1000:0058] type 0 class 0x000100 [ 5.440019] pci 0000:09:00.0: reg 10: [io 0xc000-0xc0ff] [ 5.444021] pci 0000:09:00.0: reg 14: [mem 0xfb610000-0xfb613fff 64bit] [ 5.448020] pci 0000:09:00.0: reg 1c: [mem 0xfb600000-0xfb60ffff 64bit] [ 5.452025] pci 0000:09:00.0: reg 30: [mem 0xfb400000-0xfb5fffff pref] [ 5.456039] pci 0000:09:00.0: supports D1 D2 [ 5.460021] pci 0000:00:1c.0: PCI bridge to [bus 09-09] [ 5.464005] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff] [ 5.468005] pci 0000:00:1c.0: bridge window [mem 0xfb400000-0xfb6fffff] [ 5.472007] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.476075] pci 0000:0a:00.0: [197b:2368] type 0 class 0x000101 [ 5.480036] pci 0000:0a:00.0: reg 10: [io 0xb040-0xb047] [ 5.484017] pci 0000:0a:00.0: reg 14: [io 0xb030-0xb033] [ 5.488017] pci 0000:0a:00.0: reg 18: [io 0xb020-0xb027] [ 5.492017] pci 0000:0a:00.0: reg 1c: [io 0xb010-0xb013] [ 5.496017] pci 0000:0a:00.0: reg 20: [io 0xb000-0xb00f] [ 5.500032] pci 0000:0a:00.0: reg 30: [mem 0xfbd00000-0xfbd0ffff pref] [ 5.504065] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a] [ 5.508005] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 5.512005] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff] [ 5.516007] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.520045] pci 0000:0b:01.0: [1002:515e] type 0 class 0x000300 [ 5.524023] pci 0000:0b:01.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] [ 5.528013] pci 0000:0b:01.0: reg 14: [io 0xa000-0xa0ff] [ 5.532013] pci 0000:0b:01.0: reg 18: [mem 0xfbc20000-0xfbc2ffff] [ 5.536045] pci 0000:0b:01.0: reg 30: [mem 0xfbc00000-0xfbc1ffff pref] [ 5.540025] pci 0000:0b:01.0: supports D1 D2 [ 5.544063] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] (subtractive decode) [ 5.548005] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 5.552005] pci 0000:00:1e.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 5.556008] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 5.560004] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 5.564003] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 5.568003] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 5.572003] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) [ 5.576046] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 5.581204] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 5.588055] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 5.592171] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 5.596240] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT] [ 5.604033] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9.PXHA._PRT] [ 5.608221] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9.PXHB._PRT] [ 5.680158] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 5.687236] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 5.691234] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 5.695236] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 5.699235] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 5.703466] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 5.707468] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 5.711467] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15) [ 5.715212] vgaarb: device added: PCI:0000:0b:01.0,decodes=io+mem,owns=io+mem,locks=none [ 5.716007] vgaarb: loaded [ 5.719294] SCSI subsystem initialized [ 5.720086] libata version 3.00 loaded. [ 5.728109] usbcore: registered new interface driver usbfs [ 5.732096] usbcore: registered new interface driver hub [ 5.736083] usbcore: registered new device driver usb [ 5.740486] wmi: Mapper loaded [ 5.744080] Advanced Linux Sound Architecture Driver Version 1.0.23. [ 5.748003] PCI: Using ACPI for IRQ routing [ 5.752003] PCI: pci_cache_line_size set to 64 bytes [ 5.756293] reserve RAM buffer: 000000000009c400 - 000000000009ffff [ 5.760004] reserve RAM buffer: 00000000bf30b000 - 00000000bfffffff [ 5.764018] reserve RAM buffer: 00000000bf3de000 - 00000000bfffffff [ 5.768015] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff [ 5.772191] [ 5.772191] printing PIC contents [ 5.776006] ... PIC IMR: ffff [ 5.779172] ... PIC IRR: 0c20 [ 5.780003] ... PIC ISR: 0000 [ 5.784004] ... PIC ELCR: 0c20 [ 5.788003] printing local APIC contents on CPU#0/0: [ 5.792000] ... APIC ID: 00000000 (0) [ 5.792000] ... APIC VERSION: 01060015 [ 5.792000] ... APIC TASKPRI: 00000000 (00) [ 5.792000] ... APIC PROCPRI: 00000000 [ 5.792000] ... APIC LDR: 01000000 [ 5.792000] ... APIC DFR: ffffffff [ 5.792000] ... APIC SPIV: 000001ff [ 5.792000] ... APIC ISR field: [ 5.792000] 0000000000000000000000000000000000000000000000000000000000000000 [ 5.792000] ... APIC TMR field: [ 5.792000] 0000000000000000000000000000000000000000000000000000000000000000 [ 5.792000] ... APIC IRR field: [ 5.792000] 0000000000000000000000000000000000000000000000000000000000008000 [ 5.792000] ... APIC ESR: 00000000 [ 5.792000] ... APIC ICR: 000000fc [ 5.792000] ... APIC ICR2: 35000000 [ 5.792000] ... APIC LVTT: 000200ef [ 5.792000] ... APIC LVTPC: 00000400 [ 5.792000] ... APIC LVT0: 00010700 [ 5.792000] ... APIC LVT1: 00000400 [ 5.792000] ... APIC LVTERR: 000000fe [ 5.792000] ... APIC TMICT: 00008236 [ 5.792000] ... APIC TMCCT: 00007633 [ 5.792000] ... APIC TDCR: 00000003 [ 5.792000] [ 5.792004] number of MP IRQ sources: 15. [ 5.796002] number of IO-APIC #0 registers: 24. [ 5.800002] number of IO-APIC #2 registers: 24. [ 5.804002] number of IO-APIC #3 registers: 24. [ 5.808004] number of IO-APIC #4 registers: 24. [ 5.812002] testing the IO APIC....................... [ 5.816007] [ 5.817608] IO APIC #0...... [ 5.820002] .... register #00: 00000000 [ 5.824003] ....... : physical APIC id: 00 [ 5.828002] ....... : Delivery Type: 0 [ 5.832002] ....... : LTS : 0 [ 5.836002] .... register #01: 00170020 [ 5.840003] ....... : max redirection entries: 0017 [ 5.844002] ....... : PRQ implemented: 0 [ 5.848002] ....... : IO APIC version: 0020 [ 5.852002] .... IRQ redirection table: [ 5.856004] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 5.860005] 00 000 1 0 0 0 0 0 0 00 [ 5.867338] 01 000 0 0 0 0 0 0 0 31 [ 5.872006] 02 000 0 0 0 0 0 0 0 30 [ 5.876004] 03 000 0 0 0 0 0 0 0 33 [ 5.884005] 04 000 0 0 0 0 0 0 0 34 [ 5.888006] 05 000 0 0 0 0 0 0 0 35 [ 5.892005] 06 000 0 0 0 0 0 0 0 36 [ 5.900004] 07 000 0 0 0 0 0 0 0 37 [ 5.904006] 08 000 0 0 0 0 0 0 0 38 [ 5.908005] 09 000 0 1 0 0 0 0 0 39 [ 5.916004] 0a 000 0 0 0 0 0 0 0 3A [ 5.920006] 0b 000 0 0 0 0 0 0 0 3B [ 5.927341] 0c 000 0 0 0 0 0 0 0 3C [ 5.932005] 0d 000 0 0 0 0 0 0 0 3D [ 5.936006] 0e 000 0 0 0 0 0 0 0 3E [ 5.943341] 0f 000 0 0 0 0 0 0 0 3F [ 5.948005] 10 000 1 0 0 0 0 0 0 00 [ 5.952006] 11 000 1 0 0 0 0 0 0 00 [ 5.959339] 12 000 1 0 0 0 0 0 0 00 [ 5.964004] 13 000 1 0 0 0 0 0 0 00 [ 5.968006] 14 000 1 0 0 0 0 0 0 00 [ 5.976005] 15 072 1 0 0 0 0 0 2 62 [ 5.980005] 16 000 1 0 0 0 0 0 0 00 [ 5.984007] 17 000 1 0 0 0 0 0 0 00 [ 5.992004] [ 5.993607] IO APIC #2...... [ 5.996002] .... register #00: 02000000 [ 6.000003] ....... : physical APIC id: 02 [ 6.004002] ....... : Delivery Type: 0 [ 6.008002] ....... : LTS : 0 [ 6.012002] .... register #01: 00178020 [ 6.016003] ....... : max redirection entries: 0017 [ 6.020002] ....... : PRQ implemented: 1 [ 6.024002] ....... : IO APIC version: 0020 [ 6.028002] .... register #02: 02000000 [ 6.032003] ....... : arbitration: 02 [ 6.036002] .... register #03: 00000001 [ 6.040002] ....... : Boot DT : 1 [ 6.044002] .... IRQ redirection table: [ 6.048004] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 6.052003] 00 000 1 0 0 0 0 0 0 00 [ 6.056003] 01 000 1 0 0 0 0 0 0 00 [ 6.064005] 02 000 1 0 0 0 0 0 0 00 [ 6.068003] 03 000 1 0 0 0 0 0 0 00 [ 6.072003] 04 000 1 0 0 0 0 0 0 00 [ 6.080005] 05 000 1 0 0 0 0 0 0 00 [ 6.084003] 06 000 1 0 0 0 0 0 0 00 [ 6.091340] 07 000 1 0 0 0 0 0 0 00 [ 6.096005] 08 000 1 0 0 0 0 0 0 00 [ 6.100003] 09 000 1 0 0 0 0 0 0 00 [ 6.107338] 0a 000 1 0 0 0 0 0 0 00 [ 6.112006] 0b 000 1 0 0 0 0 0 0 00 [ 6.116003] 0c 000 1 0 0 0 0 0 0 00 [ 6.123341] 0d 000 1 0 0 0 0 0 0 00 [ 6.128005] 0e 000 1 0 0 0 0 0 0 00 [ 6.132003] 0f 000 1 0 0 0 0 0 0 00 [ 6.140003] 10 000 1 0 0 0 0 0 0 00 [ 6.144005] 11 000 1 0 0 0 0 0 0 00 [ 6.148003] 12 000 1 0 0 0 0 0 0 00 [ 6.156003] 13 000 1 0 0 0 0 0 0 00 [ 6.160005] 14 000 1 0 0 0 0 0 0 00 [ 6.164003] 15 000 1 0 0 0 0 0 0 00 [ 6.172003] 16 000 1 0 0 0 0 0 0 00 [ 6.176005] 17 000 1 0 0 0 0 0 0 00 [ 6.180004] [ 6.184002] IO APIC #3...... [ 6.186991] .... register #00: 03000000 [ 6.188002] ....... : physical APIC id: 03 [ 6.192003] ....... : Delivery Type: 0 [ 6.196002] ....... : LTS : 0 [ 6.200002] .... register #01: 00178020 [ 6.204002] ....... : max redirection entries: 0017 [ 6.208003] ....... : PRQ implemented: 1 [ 6.212002] ....... : IO APIC version: 0020 [ 6.216002] .... register #02: 03000000 [ 6.220002] ....... : arbitration: 03 [ 6.224003] .... register #03: 00000001 [ 6.228002] ....... : Boot DT : 1 [ 6.232002] .... IRQ redirection table: [ 6.236002] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 6.240006] 00 000 1 0 0 0 0 0 0 00 [ 6.244003] 01 000 1 0 0 0 0 0 0 00 [ 6.251339] 02 000 1 0 0 0 0 0 0 00 [ 6.256005] 03 000 1 0 0 0 0 0 0 00 [ 6.260003] 04 000 1 0 0 0 0 0 0 00 [ 6.267339] 05 000 1 0 0 0 0 0 0 00 [ 6.272005] 06 000 1 0 0 0 0 0 0 00 [ 6.276003] 07 000 1 0 0 0 0 0 0 00 [ 6.283338] 08 000 1 0 0 0 0 0 0 00 [ 6.288005] 09 000 1 0 0 0 0 0 0 00 [ 6.292003] 0a 000 1 0 0 0 0 0 0 00 [ 6.300003] 0b 000 1 0 0 0 0 0 0 00 [ 6.304005] 0c 000 1 0 0 0 0 0 0 00 [ 6.308003] 0d 000 1 0 0 0 0 0 0 00 [ 6.316003] 0e 000 1 0 0 0 0 0 0 00 [ 6.320005] 0f 000 1 0 0 0 0 0 0 00 [ 6.324003] 10 000 1 0 0 0 0 0 0 00 [ 6.332003] 11 000 1 0 0 0 0 0 0 00 [ 6.336005] 12 000 1 0 0 0 0 0 0 00 [ 6.340003] 13 000 1 0 0 0 0 0 0 00 [ 6.348003] 14 000 1 0 0 0 0 0 0 00 [ 6.352005] 15 000 1 0 0 0 0 0 0 00 [ 6.359340] 16 000 1 0 0 0 0 0 0 00 [ 6.364003] 17 000 1 0 0 0 0 0 0 00 [ 6.368007] [ 6.369608] IO APIC #4...... [ 6.372002] .... register #00: 04000000 [ 6.376002] ....... : physical APIC id: 04 [ 6.380002] ....... : Delivery Type: 0 [ 6.384003] ....... : LTS : 0 [ 6.388002] .... register #01: 00170020 [ 6.392002] ....... : max redirection entries: 0017 [ 6.396002] ....... : PRQ implemented: 0 [ 6.400004] ....... : IO APIC version: 0020 [ 6.404002] .... register #02: 00000000 [ 6.408002] ....... : arbitration: 00 [ 6.412002] .... register #03: 00000001 [ 6.416004] ....... : Boot DT : 1 [ 6.420002] .... IRQ redirection table: [ 6.424002] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 6.428004] 00 000 1 0 0 0 0 0 0 00 [ 6.436004] 01 000 1 0 0 0 0 0 0 00 [ 6.440003] 02 000 1 0 0 0 0 0 0 00 [ 6.447339] 03 000 1 0 0 0 0 0 0 00 [ 6.452003] 04 000 1 0 0 0 0 0 0 00 [ 6.456003] 05 000 1 0 0 0 0 0 0 00 [ 6.464005] 06 000 1 0 0 0 0 0 0 00 [ 6.468004] 07 000 1 0 0 0 0 0 0 00 [ 6.472004] 08 000 1 0 0 0 0 0 0 00 [ 6.480005] 09 000 1 0 0 0 0 0 0 00 [ 6.484003] 0a 000 1 0 0 0 0 0 0 00 [ 6.488004] 0b 000 1 0 0 0 0 0 0 00 [ 6.496006] 0c 000 1 0 0 0 0 0 0 00 [ 6.500004] 0d 000 1 0 0 0 0 0 0 00 [ 6.504004] 0e 000 1 0 0 0 0 0 0 00 [ 6.512005] 0f 000 1 0 0 0 0 0 0 00 [ 6.516003] 10 000 1 0 0 0 0 0 0 00 [ 6.523339] 11 000 1 0 0 0 0 0 0 00 [ 6.528005] 12 000 1 0 0 0 0 0 0 00 [ 6.532004] 13 000 1 0 0 0 0 0 0 00 [ 6.539339] 14 000 1 0 0 0 0 0 0 00 [ 6.544005] 15 000 1 0 0 0 0 0 0 00 [ 6.548003] 16 000 1 0 0 0 0 0 0 00 [ 6.555339] 17 000 1 0 0 0 0 0 0 00 [ 6.560003] IRQ to pin mappings: [ 6.564002] IRQ0 -> 0:2 [ 6.568002] IRQ1 -> 0:1 [ 6.570690] IRQ3 -> 0:3 [ 6.572890] IRQ4 -> 0:4 [ 6.576889] IRQ5 -> 0:5 [ 6.579572] IRQ6 -> 0:6 [ 6.580890] IRQ7 -> 0:7 [ 6.584888] IRQ8 -> 0:8 [ 6.587571] IRQ9 -> 0:9 [ 6.588888] IRQ10 -> 0:10 [ 6.592975] IRQ11 -> 0:11 [ 6.596002] IRQ12 -> 0:12 [ 6.598862] IRQ13 -> 0:13 [ 6.600976] IRQ14 -> 0:14 [ 6.604301] IRQ15 -> 0:15 [ 6.607155] .................................... done. [ 6.608009] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 6.613505] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 6.618005] Switching to clocksource hpet [ 6.654547] pnp: PnP ACPI init [ 6.657764] ACPI: bus type pnp registered [ 6.662103] pnp 00:00: [bus 00-ff] [ 6.665629] pnp 00:00: [io 0x0cf8-0x0cff] [ 6.669847] pnp 00:00: [io 0x0000-0x0cf7 window] [ 6.674675] pnp 00:00: [io 0x0d00-0xffff window] [ 6.679501] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 6.685023] pnp 00:00: [mem 0x00000000 window] [ 6.689588] pnp 00:00: [mem 0xc0000000-0xffffffff window] [ 6.695391] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 6.702831] pnp 00:01: [mem 0xfc000000-0xfcffffff] [ 6.707748] pnp 00:01: [mem 0xfd000000-0xfdffffff] [ 6.712659] pnp 00:01: [mem 0xfe000000-0xfe9fffff] [ 6.717574] pnp 00:01: [mem 0xfea00000-0xfea0001f] [ 6.722486] pnp 00:01: [mem 0xfeb00000-0xfebfffff] [ 6.727400] pnp 00:01: [mem 0xfed00400-0xfed3ffff] [ 6.732316] pnp 00:01: [mem 0xfed45000-0xfedfffff] [ 6.737490] pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 6.744732] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 6.750778] pnp 00:02: [io 0x0290-0x029f] [ 6.754998] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 6.761037] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 6.767079] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 6.773380] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 6.780114] pnp 00:03: [io 0x0060] [ 6.783713] pnp 00:03: [io 0x0064] [ 6.787337] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 6.794833] pnp 00:03: [irq 1] [ 6.798183] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 6.805721] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 6.813398] pnp 00:04: [irq 12] [ 6.816840] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 6.825824] pnp 00:05: [io 0x03f8-0x03ff] [ 6.830054] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) [ 6.837549] pnp 00:05: [irq 4] [ 6.840727] pnp 00:05: [dma 0 disabled] [ 6.844899] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 6.852632] pnp 00:06: [io 0x02f8-0x02ff] [ 6.856861] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) [ 6.864355] pnp 00:06: [irq 3] [ 6.867520] pnp 00:06: [dma 0 disabled] [ 6.871695] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 6.878891] pnp 00:07: [dma 4] [ 6.882071] pnp 00:07: [io 0x0000-0x000f] [ 6.886287] pnp 00:07: [io 0x0081-0x0083] [ 6.890507] pnp 00:07: [io 0x0087] [ 6.894113] pnp 00:07: [io 0x0089-0x008b] [ 6.898334] pnp 00:07: [io 0x008f] [ 6.901949] pnp 00:07: [io 0x00c0-0x00df] [ 6.906347] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active) [ 6.913033] pnp 00:08: [io 0x0070-0x0071] [ 6.917254] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 6.924753] pnp 00:08: [irq 8] [ 6.928111] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active) [ 6.934785] pnp 00:09: [io 0x0061] [ 6.938580] pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active) [ 6.945286] pnp 00:0a: [io 0x0010-0x001f] [ 6.949503] pnp 00:0a: [io 0x0022-0x003f] [ 6.953723] pnp 00:0a: [io 0x0044-0x005f] [ 6.957943] pnp 00:0a: [io 0x0062-0x0063] [ 6.962163] pnp 00:0a: [io 0x0065-0x006f] [ 6.966384] pnp 00:0a: [io 0x0072-0x007f] [ 6.970606] pnp 00:0a: [io 0x0080] [ 6.974219] pnp 00:0a: [io 0x0084-0x0086] [ 6.978439] pnp 00:0a: [io 0x0088] [ 6.982045] pnp 00:0a: [io 0x008c-0x008e] [ 6.986266] pnp 00:0a: [io 0x0090-0x009f] [ 6.990487] pnp 00:0a: [io 0x00a2-0x00bf] [ 6.994706] pnp 00:0a: [io 0x00e0-0x00ef] [ 6.998926] pnp 00:0a: [io 0x04d0-0x04d1] [ 7.003424] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 7.010101] pnp 00:0b: [io 0x00f0-0x00ff] [ 7.014321] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 7.021992] pnp 00:0b: [irq 13] [ 7.025438] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active) [ 7.032821] pnp 00:0c: [io 0x0400-0x047f] [ 7.037045] pnp 00:0c: [io 0x1180-0x119f] [ 7.041263] pnp 00:0c: [io 0x0500-0x057f] [ 7.045483] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff] [ 7.050399] pnp 00:0c: [mem 0xfec00000-0xfecfffff] [ 7.055313] pnp 00:0c: [mem 0xff000000-0xffffffff] [ 7.060500] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 7.067634] pnp 00:0d: [mem 0xfed00000-0xfed003ff] [ 7.072778] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active) [ 7.080076] pnp: PnP ACPI: found 14 devices [ 7.084381] ACPI: ACPI bus type pnp unregistered [ 7.089135] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved [ 7.095872] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved [ 7.102607] system 00:01: [mem 0xfe000000-0xfe9fffff] has been reserved [ 7.109341] system 00:01: [mem 0xfea00000-0xfea0001f] has been reserved [ 7.116074] system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved [ 7.122810] system 00:01: [mem 0xfed00400-0xfed3ffff] could not be reserved [ 7.129888] system 00:01: [mem 0xfed45000-0xfedfffff] has been reserved [ 7.136631] system 00:02: [io 0x0290-0x029f] has been reserved [ 7.142682] system 00:0a: [io 0x04d0-0x04d1] has been reserved [ 7.148729] system 00:0c: [io 0x0400-0x047f] has been reserved [ 7.154771] system 00:0c: [io 0x1180-0x119f] has been reserved [ 7.160812] system 00:0c: [io 0x0500-0x057f] could not be reserved [ 7.167200] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 7.173934] system 00:0c: [mem 0xfec00000-0xfecfffff] could not be reserved [ 7.181016] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved [ 7.203226] pci 0000:00:1c.0: BAR 9: assigned [mem 0xd0000000-0xd01fffff 64bit pref] [ 7.211160] pci 0000:00:1c.4: BAR 9: assigned [mem 0xd0200000-0xd03fffff 64bit pref] [ 7.219086] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 7.224433] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 7.230648] pci 0000:00:01.0: bridge window [mem 0xfba00000-0xfbbfffff] [ 7.237556] pci 0000:00:01.0: bridge window [mem pref disabled] [ 7.243772] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 7.249122] pci 0000:00:03.0: bridge window [io disabled] [ 7.254907] pci 0000:00:03.0: bridge window [mem disabled] [ 7.260687] pci 0000:00:03.0: bridge window [mem pref disabled] [ 7.266905] pci 0000:00:05.0: PCI bridge to [bus 04-04] [ 7.272246] pci 0000:00:05.0: bridge window [io disabled] [ 7.278030] pci 0000:00:05.0: bridge window [mem disabled] [ 7.283810] pci 0000:00:05.0: bridge window [mem pref disabled] [ 7.290026] pci 0000:00:07.0: PCI bridge to [bus 05-05] [ 7.295369] pci 0000:00:07.0: bridge window [io disabled] [ 7.301152] pci 0000:00:07.0: bridge window [mem disabled] [ 7.306932] pci 0000:00:07.0: bridge window [mem pref disabled] [ 7.313149] pci 0000:06:00.0: PCI bridge to [bus 07-07] [ 7.318491] pci 0000:06:00.0: bridge window [io disabled] [ 7.324274] pci 0000:06:00.0: bridge window [mem disabled] [ 7.330056] pci 0000:06:00.0: bridge window [mem pref disabled] [ 7.336270] pci 0000:06:00.2: PCI bridge to [bus 08-08] [ 7.341614] pci 0000:06:00.2: bridge window [io 0xd000-0xdfff] [ 7.347830] pci 0000:06:00.2: bridge window [mem 0xfb700000-0xfb9fffff] [ 7.354737] pci 0000:06:00.2: bridge window [mem pref disabled] [ 7.360954] pci 0000:00:09.0: PCI bridge to [bus 06-08] [ 7.366298] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 7.372513] pci 0000:00:09.0: bridge window [mem 0xfb700000-0xfb9fffff] [ 7.379420] pci 0000:00:09.0: bridge window [mem pref disabled] [ 7.385635] pci 0000:00:1c.0: PCI bridge to [bus 09-09] [ 7.390979] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff] [ 7.397197] pci 0000:00:1c.0: bridge window [mem 0xfb400000-0xfb6fffff] [ 7.404111] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref] [ 7.412044] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a] [ 7.417387] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 7.423602] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff] [ 7.430510] pci 0000:00:1c.4: bridge window [mem 0xd0200000-0xd03fffff 64bit pref] [ 7.438442] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] [ 7.443787] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 7.450003] pci 0000:00:1e.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 7.456918] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 7.464868] IOAPIC[3]: Set routing entry (4-4 -> 0x29 -> IRQ 76 Mode:1 Active:1) [ 7.472450] pci 0000:00:01.0: PCI INT A -> GSI 76 (level, low) -> IRQ 76 [ 7.479277] pci 0000:00:01.0: setting latency timer to 64 [ 7.484803] IOAPIC[3]: Set routing entry (4-0 -> 0x41 -> IRQ 72 Mode:1 Active:1) [ 7.493967] pci 0000:00:03.0: PCI INT A -> GSI 72 (level, low) -> IRQ 72 [ 7.500787] pci 0000:00:03.0: setting latency timer to 64 [ 7.506315] IOAPIC[3]: Set routing entry (4-2 -> 0x49 -> IRQ 74 Mode:1 Active:1) [ 7.513901] pci 0000:00:05.0: PCI INT A -> GSI 74 (level, low) -> IRQ 74 [ 7.520731] pci 0000:00:05.0: setting latency timer to 64 [ 7.526257] IOAPIC[3]: Set routing entry (4-6 -> 0x51 -> IRQ 78 Mode:1 Active:1) [ 7.533843] pci 0000:00:07.0: PCI INT A -> GSI 78 (level, low) -> IRQ 78 [ 7.540672] pci 0000:00:07.0: setting latency timer to 64 [ 7.546202] IOAPIC[3]: Set routing entry (4-8 -> 0x59 -> IRQ 80 Mode:1 Active:1) [ 7.553785] pci 0000:00:09.0: PCI INT A -> GSI 80 (level, low) -> IRQ 80 [ 7.560604] pci 0000:00:09.0: setting latency timer to 64 [ 7.566130] pci 0000:06:00.0: setting latency timer to 64 [ 7.571658] pci 0000:06:00.2: setting latency timer to 64 [ 7.577190] IOAPIC[0]: Set routing entry (0-17 -> 0x61 -> IRQ 17 Mode:1 Active:1) [ 7.584863] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.591691] pci 0000:00:1c.0: setting latency timer to 64 [ 7.597217] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.604042] pci 0000:00:1c.4: setting latency timer to 64 [ 7.609567] pci 0000:00:1e.0: setting latency timer to 64 [ 7.615091] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 7.620783] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 7.626478] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 7.632866] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff] [ 7.639252] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 7.644946] pci_bus 0000:01: resource 1 [mem 0xfba00000-0xfbbfffff] [ 7.651333] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff] [ 7.657027] pci_bus 0000:06: resource 1 [mem 0xfb700000-0xfb9fffff] [ 7.663414] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 7.669109] pci_bus 0000:08: resource 1 [mem 0xfb700000-0xfb9fffff] [ 7.675496] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 7.681190] pci_bus 0000:09: resource 1 [mem 0xfb400000-0xfb6fffff] [ 7.687576] pci_bus 0000:09: resource 2 [mem 0xd0000000-0xd01fffff 64bit pref] [ 7.694986] pci_bus 0000:0a: resource 0 [io 0xb000-0xbfff] [ 7.700680] pci_bus 0000:0a: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 7.707068] pci_bus 0000:0a: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref] [ 7.714478] pci_bus 0000:0b: resource 0 [io 0xa000-0xafff] [ 7.720173] pci_bus 0000:0b: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 7.726560] pci_bus 0000:0b: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref] [ 7.733968] pci_bus 0000:0b: resource 4 [io 0x0000-0x0cf7] [ 7.739664] pci_bus 0000:0b: resource 5 [io 0x0d00-0xffff] [ 7.745357] pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff] [ 7.751745] pci_bus 0000:0b: resource 7 [mem 0xc0000000-0xffffffff] [ 7.758498] NET: Registered protocol family 2 [ 7.764262] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 7.775183] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 7.785505] TCP bind hash table entries: 65536 (order: 10, 5242880 bytes) [ 7.795201] TCP: Hash tables configured (established 524288 bind 65536) [ 7.801959] TCP reno registered [ 7.805568] UDP hash table entries: 8192 (order: 8, 1572864 bytes) [ 7.812974] UDP-Lite hash table entries: 8192 (order: 8, 1572864 bytes) [ 7.820915] NET: Registered protocol family 1 [ 7.825859] RPC: Registered udp transport module. [ 7.830691] RPC: Registered tcp transport module. [ 7.835516] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 7.842163] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x003f [ 7.848823] pci 0000:00:1a.0: Performing full reset [ 7.853856] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x003f [ 7.860503] pci 0000:00:1a.2: Performing full reset [ 7.865586] pci 0000:00:1a.7: EHCI: BIOS handoff [ 7.896100] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x103f [ 7.902758] pci 0000:00:1d.0: Performing full reset [ 7.907769] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x003f [ 7.914418] pci 0000:00:1d.1: Performing full reset [ 7.919435] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x003f [ 7.926083] pci 0000:00:1d.2: Performing full reset [ 7.931150] pci 0000:00:1d.7: EHCI: BIOS handoff [ 7.960211] pci 0000:0b:01.0: Boot video device [ 7.964875] PCI: CLS 64 bytes, default 64 [ 7.969124] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 7.975691] Placing 64MB software IO TLB between ffff8800b7800000 - ffff8800bb800000 [ 7.983624] software IO TLB at phys 0xb7800000 - 0xbb800000 [ 8.006229] Machine check injector initialized [ 8.018113] microcode: CPU0 sig=0x206c1, pf=0x1, revision=0x3 [ 8.023992] microcode: CPU1 sig=0x206c1, pf=0x1, revision=0x3 [ 8.029868] microcode: CPU2 sig=0x206c1, pf=0x1, revision=0x3 [ 8.035735] microcode: CPU3 sig=0x206c1, pf=0x1, revision=0x3 [ 8.041602] microcode: CPU4 sig=0x206c1, pf=0x1, revision=0x3 [ 8.047474] microcode: CPU5 sig=0x206c1, pf=0x1, revision=0x3 [ 8.053347] microcode: CPU6 sig=0x206c1, pf=0x1, revision=0x3 [ 8.059233] microcode: CPU7 sig=0x206c1, pf=0x1, revision=0x3 [ 8.065106] microcode: CPU8 sig=0x206c1, pf=0x1, revision=0x3 [ 8.070983] microcode: CPU9 sig=0x206c1, pf=0x1, revision=0x3 [ 8.076858] microcode: CPU10 sig=0x206c1, pf=0x1, revision=0x3 [ 8.082813] microcode: CPU11 sig=0x206c1, pf=0x1, revision=0x3 [ 8.088781] microcode: CPU12 sig=0x206c1, pf=0x1, revision=0x3 [ 8.094738] microcode: CPU13 sig=0x206c1, pf=0x1, revision=0x3 [ 8.100691] microcode: CPU14 sig=0x206c1, pf=0x1, revision=0x3 [ 8.106644] microcode: CPU15 sig=0x206c1, pf=0x1, revision=0x3 [ 8.112600] microcode: CPU16 sig=0x206c1, pf=0x1, revision=0x3 [ 8.118553] microcode: CPU17 sig=0x206c1, pf=0x1, revision=0x3 [ 8.124511] microcode: CPU18 sig=0x206c1, pf=0x1, revision=0x3 [ 8.130479] microcode: CPU19 sig=0x206c1, pf=0x1, revision=0x3 [ 8.136443] microcode: CPU20 sig=0x206c1, pf=0x1, revision=0x3 [ 8.142404] microcode: CPU21 sig=0x206c1, pf=0x1, revision=0x3 [ 8.148359] microcode: CPU22 sig=0x206c1, pf=0x1, revision=0x3 [ 8.154313] microcode: CPU23 sig=0x206c1, pf=0x1, revision=0x3 [ 8.160406] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 8.169384] Scanning for low memory corruption every 60 seconds [ 8.176312] audit: initializing netlink socket (disabled) [ 8.181872] type=2000 audit(1293789954.180:1): initialized [ 8.202006] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 8.212220] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 8.219446] fuse init (API version 7.15) [ 8.223927] JFS: nTxBlock = 8192, nTxLock = 65536 [ 8.232974] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 8.244027] Btrfs loaded [ 8.246674] msgmni has been set to 31955 [ 8.252070] async_tx: api initialized (async) [ 8.256732] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 8.264324] io scheduler noop registered [ 8.268372] io scheduler deadline registered [ 8.272926] io scheduler cfq registered (default) [ 8.279494] pcieport 0000:00:01.0: ACPI _OSC control granted for 0x1c [ 8.286076] pcieport 0000:00:01.0: setting latency timer to 64 [ 8.292083] pcieport 0000:00:01.0: irq 112 for MSI/MSI-X [ 8.299054] pcieport 0000:00:03.0: ACPI _OSC control granted for 0x1c [ 8.305634] pcieport 0000:00:03.0: setting latency timer to 64 [ 8.311636] pcieport 0000:00:03.0: irq 113 for MSI/MSI-X [ 8.318602] pcieport 0000:00:05.0: ACPI _OSC control granted for 0x1c [ 8.325176] pcieport 0000:00:05.0: setting latency timer to 64 [ 8.331174] pcieport 0000:00:05.0: irq 114 for MSI/MSI-X [ 8.338137] pcieport 0000:00:07.0: ACPI _OSC control granted for 0x1c [ 8.344713] pcieport 0000:00:07.0: setting latency timer to 64 [ 8.350716] pcieport 0000:00:07.0: irq 115 for MSI/MSI-X [ 8.357661] pcieport 0000:00:09.0: ACPI _OSC control granted for 0x1c [ 8.364236] pcieport 0000:00:09.0: setting latency timer to 64 [ 8.370233] pcieport 0000:00:09.0: irq 116 for MSI/MSI-X [ 8.377211] pcieport 0000:00:1c.0: ACPI _OSC control granted for 0x1c [ 8.383788] pcieport 0000:00:1c.0: setting latency timer to 64 [ 8.389789] pcieport 0000:00:1c.0: irq 117 for MSI/MSI-X [ 8.396768] pcieport 0000:00:1c.4: ACPI _OSC control granted for 0x1c [ 8.403348] pcieport 0000:00:1c.4: setting latency timer to 64 [ 8.409349] pcieport 0000:00:1c.4: irq 118 for MSI/MSI-X [ 8.415302] aer 0000:00:01.0:pcie02: service driver aer loaded [ 8.421320] aer 0000:00:03.0:pcie02: service driver aer loaded [ 8.427327] aer 0000:00:05.0:pcie02: service driver aer loaded [ 8.433332] aer 0000:00:07.0:pcie02: service driver aer loaded [ 8.439338] aer 0000:00:09.0:pcie02: service driver aer loaded [ 8.445524] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 8.452195] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 8.460578] ACPI: Sleep Button [SLPB] [ 8.464532] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 8.472906] ACPI: Power Button [PWRB] [ 8.476888] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 8.484479] ACPI: Power Button [PWRF] [ 8.489564] ACPI: acpi_idle registered with cpuidle [ 8.495358] Monitor-Mwait will be used to enter C-3 state [ 8.500942] Monitor-Mwait will be used to enter C-3 state [ 8.615179] Initializing Nozomi driver 2.1d (build date: Dec 31 2010 09:03:57) [ 8.623630] Non-volatile memory driver v1.3 [ 8.628437] Linux agpgart interface v0.103 [ 8.632783] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 8.641930] Hangcheck: Using getrawmonotonic(). [ 8.646709] [drm] Initialized drm 1.1.0 20060810 [ 8.651446] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module! [ 8.659128] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 8.686002] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 8.772392] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 8.993023] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 9.080723] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 12.168183] floppy0: no floppy controllers found [ 12.178643] brd: module loaded [ 12.184346] loop: module loaded [ 12.188615] Loading iSCSI transport class v2.0-870. [ 12.194870] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 12.200570] Detecting Adaptec I2O RAID controllers... [ 12.206039] Adaptec aacraid driver 1.1-5[26400]-ms [ 12.211590] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 12.218982] QLogic Fibre Channel HBA Driver: 8.03.05-k0 [ 12.224691] iscsi: registered transport (qla4xxx) [ 12.229653] QLogic iSCSI HBA Driver [ 12.233387] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 12.241021] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 12.248232] megasas: 00.00.04.31-rc1 Mon. May 3, 11:41:51 PST 2010 [ 12.254667] mpt2sas version 06.100.00.00 loaded [ 12.260055] ahci 0000:00:1f.2: version 3.0 [ 12.264293] IOAPIC[0]: Set routing entry (0-19 -> 0xa1 -> IRQ 19 Mode:1 Active:1) [ 12.271973] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 12.278980] ahci 0000:00:1f.2: irq 119 for MSI/MSI-X [ 12.284184] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 12.292561] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ccc ems sxs [ 12.300755] ahci 0000:00:1f.2: setting latency timer to 64 [ 12.346785] scsi0 : ahci [ 12.349945] scsi1 : ahci [ 12.352930] scsi2 : ahci [ 12.355899] scsi3 : ahci [ 12.358869] scsi4 : ahci [ 12.361850] scsi5 : ahci [ 12.365354] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 119 [ 12.373812] ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 119 [ 12.382258] ata3: SATA max UDMA/133 abar m2048@0xfbe21000 port 0xfbe21200 irq 119 [ 12.389929] ata4: SATA max UDMA/133 abar m2048@0xfbe21000 port 0xfbe21280 irq 119 [ 12.397598] ata5: SATA max UDMA/133 abar m2048@0xfbe21000 port 0xfbe21300 irq 119 [ 12.405268] ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 119 [ 12.418160] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 12.425333] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 12.431343] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2 [ 12.437387] e1000e: Copyright (c) 1999 - 2010 Intel Corporation. [ 12.443651] Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2 [ 12.450389] Copyright (c) 2007-2009 Intel Corporation. [ 12.455692] igb 0000:01:00.0: PCI INT A -> GSI 76 (level, low) -> IRQ 76 [ 12.462523] igb 0000:01:00.0: setting latency timer to 64 [ 12.468369] igb 0000:01:00.0: irq 120 for MSI/MSI-X [ 12.473378] igb 0000:01:00.0: irq 121 for MSI/MSI-X [ 12.478375] igb 0000:01:00.0: irq 122 for MSI/MSI-X [ 12.483376] igb 0000:01:00.0: irq 123 for MSI/MSI-X [ 12.488378] igb 0000:01:00.0: irq 124 for MSI/MSI-X [ 12.493377] igb 0000:01:00.0: irq 125 for MSI/MSI-X [ 12.498378] igb 0000:01:00.0: irq 126 for MSI/MSI-X [ 12.503378] igb 0000:01:00.0: irq 127 for MSI/MSI-X [ 12.508381] igb 0000:01:00.0: irq 128 for MSI/MSI-X [ 12.729499] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 12.732039] ata3: SATA link down (SStatus 0 SControl 300) [ 12.732080] ata5: SATA link down (SStatus 0 SControl 300) [ 12.732114] ata4: SATA link down (SStatus 0 SControl 300) [ 12.753039] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:30:48:cf:17:26 [ 12.760374] igb 0000:01:00.0: eth0: PBA No: 0010ff-0ff [ 12.765636] igb 0000:01:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 12.773428] IOAPIC[3]: Set routing entry (4-16 -> 0x2a -> IRQ 88 Mode:1 Active:1) [ 12.781102] igb 0000:01:00.1: PCI INT B -> GSI 88 (level, low) -> IRQ 88 [ 12.787938] igb 0000:01:00.1: setting latency timer to 64 [ 12.793777] igb 0000:01:00.1: irq 129 for MSI/MSI-X [ 12.798782] igb 0000:01:00.1: irq 130 for MSI/MSI-X [ 12.803782] igb 0000:01:00.1: irq 131 for MSI/MSI-X [ 12.808781] igb 0000:01:00.1: irq 132 for MSI/MSI-X [ 12.813783] igb 0000:01:00.1: irq 133 for MSI/MSI-X [ 12.818784] igb 0000:01:00.1: irq 134 for MSI/MSI-X [ 12.823784] igb 0000:01:00.1: irq 135 for MSI/MSI-X [ 12.828785] igb 0000:01:00.1: irq 136 for MSI/MSI-X [ 12.833788] igb 0000:01:00.1: irq 137 for MSI/MSI-X [ 13.045498] igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection [ 13.052495] igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:30:48:cf:17:27 [ 13.059829] igb 0000:01:00.1: eth1: PBA No: 0010ff-0ff [ 13.065085] igb 0000:01:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 13.072944] Intel(R) Virtual Function Network Driver - version 1.0.0-k0 [ 13.079680] Copyright (c) 2009 Intel Corporation. [ 13.084630] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 2.0.84-k2 [ 13.092645] ixgbe: Copyright (c) 1999-2010 Intel Corporation. [ 13.098644] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 13.105895] ixgb: Copyright (c) 1999-2008 Intel Corporation. [ 13.112324] jme: JMicron JMC2XX ethernet driver version 1.0.7 [ 13.118668] ns83820.c: National Semiconductor DP83820 10/100/1000 driver. [ 13.125946] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.6 (Oct 12, 2010) [ 13.133645] sky2: driver version 1.28 [ 13.136049] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 13.136081] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 13.136118] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 13.137162] ata1.00: ATA-8: ST31000528AS, CC35, max UDMA/133 [ 13.137165] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 13.138440] ata1.00: configured for UDMA/133 [ 13.138684] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC35 PQ: 0 ANSI: 5 [ 13.138800] ata6.00: ATAPI: Slimtype DVD A DS8A2S, 6P5D, max UDMA/100 [ 13.139222] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 13.139377] sd 0:0:0:0: [sda] Write Protect is off [ 13.139380] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 13.139443] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.142534] ata6.00: configured for UDMA/100 [ 13.146903] sda: sda1 sda2 [ 13.176108] ata2.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133 [ 13.176110] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 13.234428] ata2.00: configured for UDMA/133 [ 13.234622] scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 13.235092] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 13.235272] sd 1:0:0:0: [sdb] Write Protect is off [ 13.235274] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 13.235343] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.238362] scsi 5:0:0:0: CD-ROM Slimtype DVD A DS8A2S 6P5D PQ: 0 ANSI: 5 [ 13.283927] sd 0:0:0:0: [sda] Attached SCSI disk [ 13.284968] tun: Universal TUN/TAP device driver, 1.6 [ 13.284969] tun: (C) 1999-2004 Max Krasnyansky [ 13.285495] usbcore: registered new interface driver catc [ 13.285496] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver [ 13.285583] usbcore: registered new interface driver kaweth [ 13.285585] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 13.285677] usbcore: registered new interface driver pegasus [ 13.285678] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver [ 13.285787] usbcore: registered new interface driver rtl8150 [ 13.285860] usbcore: registered new interface driver asix [ 13.285946] usbcore: registered new interface driver cdc_ether [ 13.286037] usbcore: registered new interface driver cdc_eem [ 13.286125] usbcore: registered new interface driver dm9601 [ 13.286222] usbcore: registered new interface driver smsc75xx [ 13.286329] usbcore: registered new interface driver smsc95xx [ 13.286406] usbcore: registered new interface driver gl620a [ 13.286492] usbcore: registered new interface driver net1080 [ 13.286576] usbcore: registered new interface driver plusb [ 13.286660] usbcore: registered new interface driver rndis_host [ 13.286747] usbcore: registered new interface driver cdc_subset [ 13.286838] usbcore: registered new interface driver zaurus [ 13.286932] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 13.287019] usbcore: registered new interface driver int51x1 [ 13.287022] netconsole: local port 6665 [ 13.287024] netconsole: local IP 10.0.0.0 [ 13.287025] netconsole: interface 'eth0' [ 13.287026] netconsole: remote port 6666 [ 13.287027] netconsole: remote IP 192.168.1.11 [ 13.287028] netconsole: remote ethernet address 00:30:48:fe:19:95 [ 13.287030] netconsole: device eth0 not up yet, forcing it [ 13.287825] sdb: sdb1 sdb2 sdb3 < sdb5 > [ 13.463714] sd 1:0:0:0: [sdb] Attached SCSI disk [ 15.504611] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 24.001189] console [netcon0] enabled [ 24.004975] netconsole: network logging started [ 24.009817] Fusion MPT base driver 3.04.17 [ 24.014066] Copyright (c) 1999-2008 LSI Corporation [ 24.019113] Fusion MPT SPI Host driver 3.04.17 [ 24.023828] Fusion MPT FC Host driver 3.04.17 [ 24.028432] Fusion MPT SAS Host driver 3.04.17 [ 24.033062] IOAPIC[0]: Set routing entry (0-16 -> 0x8a -> IRQ 16 Mode:1 Active:1) [ 24.040737] mptsas 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 24.047998] mptbase: ioc0: Initiating bringup [ 24.756024] ioc0: LSISAS1068E B2: Capabilities={Initiator} [ 24.761943] mptsas 0000:09:00.0: setting latency timer to 64 [ 35.631435] scsi6 : ioc0: LSISAS1068E B2, FwRev=01120000h, Ports=1, MaxQ=511, IRQ=16 [ 35.669540] mptsas: ioc0: add expander: num_phys 13, sas_addr (0x5000bb52118dc0ff) [ 35.721875] mptsas: ioc0: add expander: num_phys 12, sas_addr (0x5000bb52118dc1ff) [ 35.782380] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 18, phy 0, sas_addr 0x5000c500022d0c6d [ 35.793709] scsi 6:0:0:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 35.827155] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 14, phy 1, sas_addr 0x5000c500022d09b5 [ 35.837057] sd 6:0:0:0: [sdc] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 35.838544] scsi 6:0:1:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 35.863541] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 16, phy 2, sas_addr 0x5000c500022d0f35 [ 35.873456] sd 6:0:1:0: [sdd] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 35.874449] sd 6:0:0:0: [sdc] Write Protect is off [ 35.874451] sd 6:0:0:0: [sdc] Mode Sense: b3 00 10 08 [ 35.874972] scsi 6:0:2:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 35.876384] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 35.918724] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 17, phy 3, sas_addr 0x5000c500022d2a0d [ 35.928966] sd 6:0:2:0: [sde] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 35.930073] sd 6:0:1:0: [sdd] Write Protect is off [ 35.930082] sd 6:0:1:0: [sdd] Mode Sense: b3 00 10 08 [ 35.930167] scsi 6:0:3:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 35.931944] sd 6:0:1:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 35.953866] sdc: sdc1 sdc2 [ 35.974043] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 15, phy 4, sas_addr 0x5000c500022d25dd [ 36.003342] sd 6:0:3:0: [sdf] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.011098] sd 6:0:2:0: [sde] Write Protect is off [ 36.011550] scsi 6:0:4:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 36.012973] sd 6:0:3:0: [sdf] Write Protect is off [ 36.012981] sd 6:0:3:0: [sdf] Mode Sense: b3 00 10 08 [ 36.033523] sd 6:0:3:0: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.033527] sd 6:0:0:0: [sdc] Attached SCSI disk [ 36.036787] sd 6:0:4:0: [sdg] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.036806] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 19, phy 5, sas_addr 0x5000c500022c3f65 [ 36.058218] sdd: sdd1 sdd2 [ 36.058963] scsi 6:0:5:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 36.059513] sd 6:0:4:0: [sdg] Write Protect is off [ 36.059516] sd 6:0:4:0: [sdg] Mode Sense: b3 00 10 08 [ 36.061461] sd 6:0:4:0: [sdg] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.083893] mptsas: ioc0: attaching stp device: fw_channel 0, fw_id 20, phy 12, sas_addr 0x5000bb52118dc0fc [ 36.083904] sd 6:0:5:0: [sdh] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.106628] sd 6:0:5:0: [sdh] Write Protect is off [ 36.106631] sd 6:0:5:0: [sdh] Mode Sense: b3 00 10 08 [ 36.108310] sd 6:0:5:0: [sdh] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.128108] sdf: sdf1 sdf2 [ 36.134787] sd 6:0:2:0: [sde] Mode Sense: b3 00 10 08 [ 36.177954] sdg: sdg1 sdg2 [ 36.177973] scsi 6:0:6:0: Enclosure XYRATEX 3GSAS1.0-SATAEXP 1.05 PQ: 0 ANSI: 5 [ 36.178752] sd 6:0:2:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.200607] sdh: sdh1 sdh2 [ 36.241426] sd 6:0:3:0: [sdf] Attached SCSI disk [ 36.246225] sd 6:0:1:0: [sdd] Attached SCSI disk [ 36.249742] sd 6:0:4:0: [sdg] Attached SCSI disk [ 36.250122] sd 6:0:5:0: [sdh] Attached SCSI disk [ 36.255882] sde: sde1 sde2 [ 36.290005] sd 6:0:2:0: [sde] Attached SCSI disk [ 36.401888] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 28, phy 0, sas_addr 0x5000c500022c41a5 [ 36.413241] scsi 6:0:7:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 36.446522] sd 6:0:7:0: [sdi] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.454227] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 29, phy 1, sas_addr 0x5000c500130f4649 [ 36.465520] sd 6:0:7:0: [sdi] Write Protect is off [ 36.470462] sd 6:0:7:0: [sdi] Mode Sense: b3 00 10 08 [ 36.470478] scsi 6:0:8:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 36.485829] sd 6:0:8:0: [sdj] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.493537] sd 6:0:7:0: [sdi] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.494686] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 30, phy 2, sas_addr 0x5000c500130fe681 [ 36.496152] sd 6:0:8:0: [sdj] Write Protect is off [ 36.496155] sd 6:0:8:0: [sdj] Mode Sense: b3 00 10 08 [ 36.496245] scsi 6:0:9:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 36.497575] sd 6:0:8:0: [sdj] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.499156] sd 6:0:9:0: [sdk] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.500779] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 31, phy 3, sas_addr 0x5000c500130f4f4d [ 36.501641] sd 6:0:9:0: [sdk] Write Protect is off [ 36.501644] sd 6:0:9:0: [sdk] Mode Sense: b3 00 10 08 [ 36.503163] sd 6:0:9:0: [sdk] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.508898] sdj: sdj1 sdj2 [ 36.516032] sdk: sdk1 sdk2 [ 36.532452] scsi 6:0:10:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 36.535039] sd 6:0:10:0: [sdl] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.536500] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 32, phy 4, sas_addr 0x5000c50013005f59 [ 36.537752] sd 6:0:10:0: [sdl] Write Protect is off [ 36.537755] sd 6:0:10:0: [sdl] Mode Sense: b3 00 10 08 [ 36.537901] scsi 6:0:11:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 36.539510] sd 6:0:10:0: [sdl] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.540492] sd 6:0:11:0: [sdm] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.542013] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 33, phy 5, sas_addr 0x5000c500130e21cd [ 36.543268] sd 6:0:11:0: [sdm] Write Protect is off [ 36.543270] sd 6:0:11:0: [sdm] Mode Sense: b3 00 10 08 [ 36.543429] scsi 6:0:12:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 36.544722] sd 6:0:11:0: [sdm] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.546154] sd 6:0:12:0: [sdn] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.547682] Fusion MPT misc device (ioctl) driver 3.04.17 [ 36.547830] mptctl: Registered with Fusion MPT base driver [ 36.547831] mptctl: /dev/mptctl @ (major,minor=10,220) [ 36.548060] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 36.548062] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 36.548158] IOAPIC[0]: Set routing entry (0-18 -> 0x92 -> IRQ 18 Mode:1 Active:1) [ 36.548163] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 36.548210] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 36.548213] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 36.548320] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file 'devices' [ 36.548337] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 36.548352] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 36.548845] sd 6:0:12:0: [sdn] Write Protect is off [ 36.548849] sd 6:0:12:0: [sdn] Mode Sense: b3 00 10 08 [ 36.549245] sdm: sdm1 sdm2 [ 36.550325] sd 6:0:12:0: [sdn] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.552314] sdl: sdl1 sdl2 [ 36.554638] sdn: sdn1 sdn2 [ 36.821345] sd 6:0:9:0: [sdk] Attached SCSI disk [ 36.826141] sd 6:0:11:0: [sdm] Attached SCSI disk [ 36.826161] sd 6:0:8:0: [sdj] Attached SCSI disk [ 36.826181] sd 6:0:10:0: [sdl] Attached SCSI disk [ 36.827551] sd 6:0:12:0: [sdn] Attached SCSI disk [ 36.834817] sdi: sdi1 sdi2 [ 36.860044] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 36.869198] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 36.874006] sd 6:0:7:0: [sdi] Attached SCSI disk [ 36.883566] ehci_hcd 0000:00:1a.7: debug port 1 [ 36.888223] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 36.901266] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 36.908178] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 36.914083] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbe23000 [ 36.919872] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 36.932907] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 36.952032] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 36.958010] usb usb1: default language 0x0409 [ 36.962509] usb usb1: udev 1, busnum 1, minor = 0 [ 36.967337] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 36.974250] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 36.981662] usb usb1: Product: EHCI Host Controller [ 36.986664] usb usb1: Manufacturer: Linux 2.6.37-rc8-dt5+ ehci_hcd [ 36.992964] usb usb1: SerialNumber: 0000:00:1a.7 [ 36.997906] usb usb1: usb_probe_device [ 37.001780] usb usb1: configuration #1 chosen from 1 choice [ 37.007517] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 37.013531] hub 1-0:1.0: usb_probe_interface [ 37.017925] hub 1-0:1.0: usb_probe_interface - got id [ 37.023097] hub 1-0:1.0: USB hub found [ 37.026983] hub 1-0:1.0: 6 ports detected [ 37.031114] hub 1-0:1.0: standalone hub [ 37.035073] hub 1-0:1.0: no power switching (usb 1.0) [ 37.040247] hub 1-0:1.0: individual port over-current protection [ 37.046374] hub 1-0:1.0: power on to power good time: 20ms [ 37.052021] hub 1-0:1.0: local power source is good [ 37.057020] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 37.064090] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 37.071925] IOAPIC[0]: Set routing entry (0-23 -> 0x9a -> IRQ 23 Mode:1 Active:1) [ 37.079599] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 37.086885] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 37.092839] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 37.098195] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '002' [ 37.105874] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 37.128032] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 37.137186] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 37.146802] ehci_hcd 0000:00:1d.7: debug port 1 [ 37.151461] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 37.164502] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 37.171419] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 37.177348] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 37.177371] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbe22000 [ 37.177376] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 37.181252] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 37.192032] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 37.192104] usb usb2: default language 0x0409 [ 37.192123] usb usb2: udev 1, busnum 2, minor = 128 [ 37.192125] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 37.192126] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 37.192128] usb usb2: Product: EHCI Host Controller [ 37.192129] usb usb2: Manufacturer: Linux 2.6.37-rc8-dt5+ ehci_hcd [ 37.192131] usb usb2: SerialNumber: 0000:00:1d.7 [ 37.192306] usb usb2: usb_probe_device [ 37.192308] usb usb2: configuration #1 chosen from 1 choice [ 37.192319] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 37.192423] hub 2-0:1.0: usb_probe_interface [ 37.192424] hub 2-0:1.0: usb_probe_interface - got id [ 37.192426] hub 2-0:1.0: USB hub found [ 37.192441] hub 2-0:1.0: 6 ports detected [ 37.192443] hub 2-0:1.0: standalone hub [ 37.192444] hub 2-0:1.0: no power switching (usb 1.0) [ 37.192445] hub 2-0:1.0: individual port over-current protection [ 37.192446] hub 2-0:1.0: power on to power good time: 20ms [ 37.192457] hub 2-0:1.0: local power source is good [ 37.192459] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 37.192528] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 37.192762] uhci_hcd: USB Universal Host Controller Interface driver [ 37.331860] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 37.331921] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 37.331942] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 37.331951] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 37.331972] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '003' [ 37.331984] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 37.374634] hub 2-0:1.0: port 1: status 0501 change 0001 [ 37.408026] uhci_hcd 0000:00:1a.0: detected 2 ports [ 37.413037] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 37.419863] uhci_hcd 0000:00:1a.0: Performing full reset [ 37.425309] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 37.431183] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0c0 [ 37.437127] usb usb3: default language 0x0409 [ 37.441629] usb usb3: udev 1, busnum 3, minor = 256 [ 37.446627] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 37.453533] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 37.460942] usb usb3: Product: UHCI Host Controller [ 37.465945] usb usb3: Manufacturer: Linux 2.6.37-rc8-dt5+ uhci_hcd [ 37.472244] usb usb3: SerialNumber: 0000:00:1a.0 [ 37.477185] usb usb3: usb_probe_device [ 37.480054] hub 2-0:1.0: state 7 ports 6 chg 0002 evt 0000 [ 37.480075] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 37.494634] usb usb3: configuration #1 chosen from 1 choice [ 37.500336] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 37.506334] hub 3-0:1.0: usb_probe_interface [ 37.510726] hub 3-0:1.0: usb_probe_interface - got id [ 37.515897] hub 3-0:1.0: USB hub found [ 37.519783] hub 3-0:1.0: 2 ports detected [ 37.523917] hub 3-0:1.0: standalone hub [ 37.527877] hub 3-0:1.0: no power switching (usb 1.0) [ 37.533049] hub 3-0:1.0: individual port over-current protection [ 37.536280] ehci_hcd 0000:00:1d.7: port 1 full speed --> companion [ 37.536284] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 37.536290] hub 2-0:1.0: port 1 not reset yet, waiting 50ms [ 37.560290] hub 3-0:1.0: power on to power good time: 2ms [ 37.565818] hub 3-0:1.0: local power source is good [ 37.570818] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 37.577860] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 37.585617] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0 [ 37.591804] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 37.592048] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 37.592088] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0002 [ 37.613640] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 37.619597] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 37.624947] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '004' [ 37.632629] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4 [ 37.660030] uhci_hcd 0000:00:1a.2: detected 2 ports [ 37.665037] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 37.671863] uhci_hcd 0000:00:1a.2: Performing full reset [ 37.677316] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 37.683217] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 37.683240] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000f0a0 [ 37.683313] usb usb4: default language 0x0409 [ 37.683332] usb usb4: udev 1, busnum 4, minor = 384 [ 37.683334] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 37.683336] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 37.683337] usb usb4: Product: UHCI Host Controller [ 37.683338] usb usb4: Manufacturer: Linux 2.6.37-rc8-dt5+ uhci_hcd [ 37.683340] usb usb4: SerialNumber: 0000:00:1a.2 [ 37.683520] usb usb4: usb_probe_device [ 37.683522] usb usb4: configuration #1 chosen from 1 choice [ 37.683533] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 37.683637] hub 4-0:1.0: usb_probe_interface [ 37.683638] hub 4-0:1.0: usb_probe_interface - got id [ 37.683639] hub 4-0:1.0: USB hub found [ 37.683649] hub 4-0:1.0: 2 ports detected [ 37.683650] hub 4-0:1.0: standalone hub [ 37.683651] hub 4-0:1.0: no power switching (usb 1.0) [ 37.683652] hub 4-0:1.0: individual port over-current protection [ 37.683654] hub 4-0:1.0: power on to power good time: 2ms [ 37.683665] hub 4-0:1.0: local power source is good [ 37.683667] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 37.683708] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 37.683809] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2 [ 37.683865] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 37.683874] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 37.683877] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 37.683887] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '005' [ 37.683893] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 37.847705] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 37.876026] uhci_hcd 0000:00:1d.0: detected 2 ports [ 37.881035] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 37.887861] uhci_hcd 0000:00:1d.0: Performing full reset [ 37.893307] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 37.899179] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080 [ 37.905106] usb usb5: default language 0x0409 [ 37.909608] usb usb5: udev 1, busnum 5, minor = 512 [ 37.914605] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 37.921513] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 37.928923] usb usb5: Product: UHCI Host Controller [ 37.933924] usb usb5: Manufacturer: Linux 2.6.37-rc8-dt5+ uhci_hcd [ 37.940224] usb usb5: SerialNumber: 0000:00:1d.0 [ 37.945159] usb usb5: usb_probe_device [ 37.949041] usb usb5: configuration #1 chosen from 1 choice [ 37.954745] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 37.960734] hub 5-0:1.0: usb_probe_interface [ 37.965124] hub 5-0:1.0: usb_probe_interface - got id [ 37.970299] hub 5-0:1.0: USB hub found [ 37.974180] hub 5-0:1.0: 2 ports detected [ 37.978315] hub 5-0:1.0: standalone hub [ 37.982274] hub 5-0:1.0: no power switching (usb 1.0) [ 37.987449] hub 5-0:1.0: individual port over-current protection [ 37.993577] hub 5-0:1.0: power on to power good time: 2ms [ 37.999107] hub 5-0:1.0: local power source is good [ 38.004109] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 38.011153] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 38.018928] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 [ 38.025101] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 38.032367] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 38.038323] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 38.043677] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '006' [ 38.051354] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 38.084026] uhci_hcd 0000:00:1d.1: detected 2 ports [ 38.089034] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 38.095859] uhci_hcd 0000:00:1d.1: Performing full reset [ 38.101332] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 38.107209] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060 [ 38.113092] uhci_hcd 0000:00:1d.0: port 1 portsc 009b,00 [ 38.118530] hub 5-0:1.0: port 1: status 0101 change 0003 [ 38.118701] usb usb6: default language 0x0409 [ 38.118729] usb usb6: udev 1, busnum 6, minor = 640 [ 38.118731] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 38.118733] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 38.118735] usb usb6: Product: UHCI Host Controller [ 38.118736] usb usb6: Manufacturer: Linux 2.6.37-rc8-dt5+ uhci_hcd [ 38.118738] usb usb6: SerialNumber: 0000:00:1d.1 [ 38.118952] usb usb6: usb_probe_device [ 38.118954] usb usb6: configuration #1 chosen from 1 choice [ 38.118969] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 38.119109] hub 6-0:1.0: usb_probe_interface [ 38.119112] hub 6-0:1.0: usb_probe_interface - got id [ 38.119114] hub 6-0:1.0: USB hub found [ 38.119128] hub 6-0:1.0: 2 ports detected [ 38.119130] hub 6-0:1.0: standalone hub [ 38.119132] hub 6-0:1.0: no power switching (usb 1.0) [ 38.119133] hub 6-0:1.0: individual port over-current protection [ 38.119135] hub 6-0:1.0: power on to power good time: 2ms [ 38.119150] hub 6-0:1.0: local power source is good [ 38.119153] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 38.119212] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 38.119357] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 [ 38.119413] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 38.119428] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 38.119432] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 38.119442] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '007' [ 38.119450] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 38.220057] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 38.308030] uhci_hcd 0000:00:1d.2: detected 2 ports [ 38.313041] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 38.319866] uhci_hcd 0000:00:1d.2: Performing full reset [ 38.325311] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 38.331187] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040 [ 38.337113] usb usb7: default language 0x0409 [ 38.341613] usb usb7: udev 1, busnum 7, minor = 768 [ 38.346621] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 38.353529] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 38.360939] usb usb7: Product: UHCI Host Controller [ 38.365938] usb usb7: Manufacturer: Linux 2.6.37-rc8-dt5+ uhci_hcd [ 38.372240] usb usb7: SerialNumber: 0000:00:1d.2 [ 38.377176] usb usb7: usb_probe_device [ 38.380045] hub 5-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 38.380065] hub 5-0:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 38.392963] usb usb7: configuration #1 chosen from 1 choice [ 38.398667] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 38.404658] hub 7-0:1.0: usb_probe_interface [ 38.409048] hub 7-0:1.0: usb_probe_interface - got id [ 38.414220] hub 7-0:1.0: USB hub found [ 38.418103] hub 7-0:1.0: 2 ports detected [ 38.422237] hub 7-0:1.0: standalone hub [ 38.426197] hub 7-0:1.0: no power switching (usb 1.0) [ 38.431372] hub 7-0:1.0: individual port over-current protection [ 38.437499] hub 7-0:1.0: power on to power good time: 2ms [ 38.443028] hub 7-0:1.0: local power source is good [ 38.448030] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 38.455071] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 38.462847] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 [ 38.469115] Initializing USB Mass Storage driver... [ 38.474255] usbcore: registered new interface driver usb-storage [ 38.480383] USB Mass Storage support registered. [ 38.485271] usbcore: registered new interface driver libusual [ 38.491252] usbcore: registered new interface driver ums-alauda [ 38.492055] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 38.506062] usbcore: registered new interface driver ums-cypress [ 38.512294] usbcore: registered new interface driver ums-datafab [ 38.518523] usbcore: registered new interface driver ums-freecom [ 38.524754] usbcore: registered new interface driver ums-isd200 [ 38.530900] usbcore: registered new interface driver ums-jumpshot [ 38.537217] usbcore: registered new interface driver ums-karma [ 38.543273] usbcore: registered new interface driver ums-onetouch [ 38.549592] usbcore: registered new interface driver ums-sddr09 [ 38.555767] usbcore: registered new interface driver ums-sddr55 [ 38.561922] usbcore: registered new interface driver ums-usbat [ 38.568120] usbcore: registered new interface driver usbserial [ 38.574186] USB Serial support registered for generic [ 38.592029] usb usb3: suspend_rh (auto-stop) [ 38.628040] usb 5-1: ep0 maxpacket = 8 [ 38.649114] usb 5-1: udev 2, busnum 5, minor = 513 [ 38.654048] usb 5-1: New USB device found, idVendor=0557, idProduct=8021 [ 38.660886] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 38.668351] usb 5-1: usb_probe_device [ 38.672146] usb 5-1: configuration #1 chosen from 1 choice [ 38.680116] usb 5-1: adding 5-1:1.0 (config #1, interface 0) [ 38.686043] hub 5-1:1.0: usb_probe_interface [ 38.690448] hub 5-1:1.0: usb_probe_interface - got id [ 38.695629] hub 5-1:1.0: USB hub found [ 38.701118] hub 5-1:1.0: 4 ports detected [ 38.705264] hub 5-1:1.0: standalone hub [ 38.709233] hub 5-1:1.0: individual port power switching [ 38.714686] hub 5-1:1.0: individual port over-current protection [ 38.720813] hub 5-1:1.0: power on to power good time: 100ms [ 38.729113] hub 5-1:1.0: local power source is good [ 38.734134] hub 5-1:1.0: enabling power on all ports [ 38.743155] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '002' [ 38.750871] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 38.751031] usbcore: registered new interface driver usbserial_generic [ 38.751033] usbserial: USB Serial Driver core [ 38.751129] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter [ 38.751242] usbcore: registered new interface driver belkin [ 38.751243] belkin_sa: v1.3:USB Belkin Serial converter driver [ 38.751337] USB Serial support registered for MCT U232 [ 38.751445] usbcore: registered new interface driver mct_u232 [ 38.751447] mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver [ 38.820273] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 38.830688] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 38.835800] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 38.840037] usb usb4: suspend_rh (auto-stop) [ 38.845821] mice: PS/2 mouse device common for all mice [ 38.851200] hub 5-1:1.0: port 1: status 0301 change 0001 [ 38.857830] rtc_cmos 00:08: RTC can wake from S4 [ 38.896269] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 38.902525] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 38.909452] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 38.915500] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0460) [ 38.922785] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 38.928921] iTCO_vendor_support: vendor-support=0 [ 38.933755] SoftDog: cannot register miscdev on minor=130 (err=-16) [ 38.940167] md: linear personality registered for level -1 [ 38.945783] md: raid0 personality registered for level 0 [ 38.951216] md: raid1 personality registered for level 1 [ 38.956648] md: raid10 personality registered for level 10 [ 38.962257] md: raid6 personality registered for level 6 [ 38.967693] md: raid5 personality registered for level 5 [ 38.973134] md: raid4 personality registered for level 4 [ 38.978567] md: multipath personality registered for level -4 [ 38.984435] md: faulty personality registered for level -5 [ 38.990059] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 128, phase 0, 12 us [ 38.998110] hub 5-1:1.0: state 7 ports 4 chg 0002 evt 0000 [ 39.003934] device-mapper: uevent: version 1.0.3 [ 39.005117] hub 5-1:1.0: port 1, status 0301, change 0000, 1.5 Mb/s [ 39.015427] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com [ 39.024430] device-mapper: multipath: version 1.1.1 loaded [ 39.030049] device-mapper: multipath round-robin: version 1.0.0 loaded [ 39.036704] device-mapper: multipath queue-length: version 0.1.0 loaded [ 39.043444] device-mapper: multipath service-time: version 0.2.0 loaded [ 39.050573] device-mapper: dm-log-userspace: version 1.0.0 loaded [ 39.066817] cpuidle: using governor ladder [ 39.077103] usb 5-1.1: new low speed USB device using uhci_hcd and address 3 [ 39.097474] cpuidle: using governor menu [ 39.101520] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 39.107587] ioatdma 0000:00:16.0: can't derive routing for PCI INT A [ 39.114109] ioatdma 0000:00:16.0: PCI INT A: no GSI [ 39.119263] ioatdma 0000:00:16.0: setting latency timer to 64 [ 39.125324] ioatdma 0000:00:16.0: irq 138 for MSI/MSI-X [ 39.131806] igb 0000:01:00.0: DCA enabled [ 39.136151] igb 0000:01:00.1: DCA enabled [ 39.140326] ioatdma 0000:00:16.1: can't derive routing for PCI INT B [ 39.146839] ioatdma 0000:00:16.1: PCI INT B: no GSI [ 39.151978] ioatdma 0000:00:16.1: setting latency timer to 64 [ 39.158031] ioatdma 0000:00:16.1: irq 139 for MSI/MSI-X [ 39.164380] ioatdma 0000:00:16.2: can't derive routing for PCI INT C [ 39.170862] ioatdma 0000:00:16.2: PCI INT C: no GSI [ 39.175999] ioatdma 0000:00:16.2: setting latency timer to 64 [ 39.182057] ioatdma 0000:00:16.2: irq 140 for MSI/MSI-X [ 39.188324] ioatdma 0000:00:16.3: can't derive routing for PCI INT D [ 39.194813] ioatdma 0000:00:16.3: PCI INT D: no GSI [ 39.199976] ioatdma 0000:00:16.3: setting latency timer to 64 [ 39.206029] ioatdma 0000:00:16.3: irq 141 for MSI/MSI-X [ 39.212279] ioatdma 0000:00:16.4: can't derive routing for PCI INT A [ 39.218776] ioatdma 0000:00:16.4: PCI INT A: no GSI [ 39.223918] ioatdma 0000:00:16.4: setting latency timer to 64 [ 39.229961] ioatdma 0000:00:16.4: irq 142 for MSI/MSI-X [ 39.235374] usb 5-1.1: skipped 1 descriptor after interface [ 39.236414] ioatdma 0000:00:16.5: can't derive routing for PCI INT B [ 39.236416] ioatdma 0000:00:16.5: PCI INT B: no GSI [ 39.236456] ioatdma 0000:00:16.5: setting latency timer to 64 [ 39.236637] ioatdma 0000:00:16.5: irq 143 for MSI/MSI-X [ 39.237658] ioatdma 0000:00:16.6: can't derive routing for PCI INT C [ 39.237660] ioatdma 0000:00:16.6: PCI INT C: no GSI [ 39.237701] ioatdma 0000:00:16.6: setting latency timer to 64 [ 39.237873] ioatdma 0000:00:16.6: irq 144 for MSI/MSI-X [ 39.238900] ioatdma 0000:00:16.7: can't derive routing for PCI INT D [ 39.238902] ioatdma 0000:00:16.7: PCI INT D: no GSI [ 39.238944] ioatdma 0000:00:16.7: setting latency timer to 64 [ 39.239115] ioatdma 0000:00:16.7: irq 145 for MSI/MSI-X [ 39.240751] usbcore: registered new interface driver usbhid [ 39.240753] usbhid: USB HID core driver [ 39.241408] dell-wmi: No known WMI GUID found [ 39.241410] acer-wmi: Acer Laptop ACPI-WMI Extras [ 39.241415] acer-wmi: No or unsupported WMI interface, unable to load [ 39.242097] ALSA device list: [ 39.242098] No soundcards found. [ 39.242284] oprofile: using NMI interrupt. [ 39.336063] usb usb6: suspend_rh (auto-stop) [ 39.349757] usb 5-1.1: skipped 1 descriptor after interface [ 39.349950] netem: version 1.2 [ 39.349953] Netfilter messages via NETLINK v0.30. [ 39.350002] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 39.369658] usb 5-1.1: skipped 1 descriptor after interface [ 39.375868] ctnetlink v0.93: registering with nfnetlink. [ 39.381396] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 39.382102] usb 5-1.1: default language 0x0409 [ 39.393074] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 39.400575] xt_time: kernel timezone is -0000 [ 39.406780] ip_tables: (C) 2000-2006 Netfilter Core Team [ 39.412158] usb 5-1.1: udev 3, busnum 5, minor = 514 [ 39.412160] usb 5-1.1: New USB device found, idVendor=0557, idProduct=2261 [ 39.412162] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 39.412164] usb 5-1.1: Product: CS1716A V1.0.098 [ 39.412165] usb 5-1.1: Manufacturer: ATEN International Co. Ltd [ 39.412484] usb 5-1.1: usb_probe_device [ 39.412487] usb 5-1.1: configuration #1 chosen from 1 choice [ 39.417159] usb 5-1.1: adding 5-1.1:1.0 (config #1, interface 0) [ 39.417453] usbserial_generic 5-1.1:1.0: usb_probe_interface [ 39.417455] usbserial_generic 5-1.1:1.0: usb_probe_interface - got id [ 39.417492] usbhid 5-1.1:1.0: usb_probe_interface [ 39.417494] usbhid 5-1.1:1.0: usb_probe_interface - got id [ 39.481316] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [ 39.487879] arp_tables: (C) 2002 David S. Miller [ 39.492712] TCP bic registered [ 39.495880] TCP cubic registered [ 39.499275] TCP westwood registered [ 39.502925] TCP highspeed registered [ 39.506657] TCP hybla registered [ 39.510049] TCP htcp registered [ 39.513349] TCP vegas registered [ 39.516739] TCP veno registered [ 39.519989] TCP scalable registered [ 39.523644] TCP lp registered [ 39.526773] TCP yeah registered [ 39.530078] TCP illinois registered [ 39.533722] Initializing XFRM netlink socket [ 39.538177] NET: Registered protocol family 17 [ 39.542795] NET: Registered protocol family 15 [ 39.544334] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input3 [ 39.544382] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 8, phase 4, 118 us [ 39.544646] generic-usb 0003:0557:2261.0001: input: USB HID v1.00 Keyboard [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-1.1/input0 [ 39.544681] usb 5-1.1: adding 5-1.1:1.1 (config #1, interface 1) [ 39.544900] usbserial_generic 5-1.1:1.1: usb_probe_interface [ 39.544902] usbserial_generic 5-1.1:1.1: usb_probe_interface - got id [ 39.544925] usbhid 5-1.1:1.1: usb_probe_interface [ 39.544927] usbhid 5-1.1:1.1: usb_probe_interface - got id [ 39.584065] usb usb7: suspend_rh (auto-stop) [ 39.617374] Bridge firewalling registered [ 39.621557] Ebtables v2.0 registered [ 39.629333] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.1/input/input4 [ 39.641828] uhci_hcd 0000:00:1d.0: reserve dev 3 ep82-INT, period 8, phase 4, 118 us [ 39.643678] PM: Hibernation image not present or could not be loaded. [ 39.643708] registered taskstats version 1 [ 39.644756] Magic number: 6:938:73 [ 39.664209] rtc_cmos 00:08: setting system clock to 2010-12-31 10:06:28 UTC (1293789988) [ 39.664480] generic-usb 0003:0557:2261.0002: input: USB HID v1.00 Device [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-1.1/input1 [ 39.664512] usb 5-1.1: adding 5-1.1:1.2 (config #1, interface 2) [ 39.664781] usbserial_generic 5-1.1:1.2: usb_probe_interface [ 39.664783] usbserial_generic 5-1.1:1.2: usb_probe_interface - got id [ 39.664808] usbhid 5-1.1:1.2: usb_probe_interface [ 39.664809] usbhid 5-1.1:1.2: usb_probe_interface - got id [ 39.715233] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.2/input/input5 [ 39.728270] generic-usb 0003:0557:2261.0003: input: USB HID v1.10 Mouse [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-1.1/input2 [ 39.741811] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '003' [ 39.749556] hub 5-1:1.0: state 7 ports 4 chg 0000 evt 0002 [ 41.220150] IP-Config: Complete: [ 41.223255] device=eth0, addr=192.168.1.69, mask=255.255.255.0, gw=192.168.1.1, [ 41.231436] host=lkp-ws02, domain=, nis-domain=(none), [ 41.237256] bootserver=192.168.1.11, rootserver=192.168.1.11, rootpath= [ 41.245401] md: Waiting for all devices to be available before autodetect [ 41.252327] md: If you don't use raid, use raid=noautodetect [ 41.259224] md: Autodetecting RAID arrays. [ 41.263492] md: Scanned 0 and added 0 devices. [ 41.268074] md: autorun ... [ 41.270986] md: ... autorun DONE. [ 41.287730] VFS: Mounted root (nfs filesystem) on device 0:15. [ 41.293759] debug: unmapping init memory ffffffff81fd9000..ffffffff82298000 [ 41.439065] stty used greatest stack depth: 3184 bytes left [ 41.765515] create_static_n used greatest stack depth: 3120 bytes left [ 42.282548] hdparm used greatest stack depth: 2848 bytes left [ 42.797968] sshd (3234): /proc/3234/oom_adj is deprecated, please use /proc/3234/oom_score_adj instead. [ 44.272473] EXT4-fs (sda1): recovery complete [ 44.277364] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 44.505578] device fsid 294f7a6c860b1a46-6af5d64184ec87b3 devid 1 transid 7 /dev/sdc1 [ 44.695670] device fsid 134317c30255406e-f8a9ee198c13f84 devid 1 transid 7 /dev/sdd1 [ 44.893378] device fsid ab4e73645f11dc31-d52c6011ec40b91 devid 1 transid 7 /dev/sde1 [ 45.127592] device fsid 7f4e2bbfd10e7548-27d2c9433cc79cbb devid 1 transid 7 /dev/sdf1 [ 45.364529] device fsid 3b4a52c4aa308542-478c5aad3ace98c devid 1 transid 7 /dev/sdg1 [ 45.574392] device fsid d14f5227fcfd0863-53cd27f1377c3a98 devid 1 transid 7 /dev/sdh1 [ 45.836386] device fsid a24c4d6707ad878c-92071cf44a020794 devid 1 transid 7 /dev/sdi1 [ 46.013113] device fsid bf4cb88aae610fa4-ae561f37bf01a5a0 devid 1 transid 7 /dev/sdj1 [ 46.183970] device fsid 694666328bf99090-d9a82b0017208197 devid 1 transid 7 /dev/sdk1 [ 46.330803] device fsid 974d0c6ab44fe824-7a778b12cca55a80 devid 1 transid 7 /dev/sdl1