[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.37-rc8-dt5+ (wfg@bee) (gcc version 4.5.0 (GCC) ) #395 SMP Fri Dec 31 09:08:10 CST 2010 [ 0.000000] Command line: run=/home/wfg/ioless-balance_dirty_pages/test-each-fs.sh debug sched_debug apic=debug panic=10 hung_task_panic=1 softlockup_panic=1 unknown_nmi_panic=1 nmi_watchdog=panic,lapic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 netconsole=@:/eth0,6666@192.168.1.11/00:30:48:fe:19:95 ip=192.168.1.69:192.168.1.11:192.168.1.1:255.255.255.0:lkp-ws02:eth0:none nfsroot=192.168.1.11:/nfsroot/wfg,tcp,v3,rsize=524288,wsize=524288 rw BOOT_IMAGE=x86_64/vmlinuz [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable) [ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf30b000 (usable) [ 0.000000] BIOS-e820: 00000000bf30b000 - 00000000bf38b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf38b000 - 00000000bf3a1000 (reserved) [ 0.000000] BIOS-e820: 00000000bf3a1000 - 00000000bf3a2000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf3a2000 - 00000000bf3b3000 (reserved) [ 0.000000] BIOS-e820: 00000000bf3b3000 - 00000000bf3b6000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf3b6000 - 00000000bf3dd000 (reserved) [ 0.000000] BIOS-e820: 00000000bf3dd000 - 00000000bf3de000 (usable) [ 0.000000] BIOS-e820: 00000000bf3de000 - 00000000bf3df000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf3df000 - 00000000bf414000 (reserved) [ 0.000000] BIOS-e820: 00000000bf414000 - 00000000bf416000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf416000 - 00000000bf418000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf418000 - 00000000bf420000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf420000 - 00000000bf421000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf421000 - 00000000bf423000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf423000 - 00000000bf42b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf42b000 - 00000000bf454000 (reserved) [ 0.000000] BIOS-e820: 00000000bf454000 - 00000000bf657000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf657000 - 00000000bf800000 (usable) [ 0.000000] BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000440000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: X8DTN/X8DTN, BIOS 4.6.3 01/06/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x440000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FC00000000 write-back [ 0.000000] 1 base 0400000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFC0000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes. [ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes. [ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [ffff8800000fcf20] fcf20 [ 0.000000] mpc: fc9f0-fcea4 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000 [ 0.000000] 0000000000 - 00bf800000 page 4k [ 0.000000] kernel direct mapping tables up to bf800000 @ 1fa00000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000440000000 [ 0.000000] 0100000000 - 0440000000 page 4k [ 0.000000] kernel direct mapping tables up to 440000000 @ bd0f9000-bf30b000 [ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 A M I) [ 0.000000] ACPI: XSDT 00000000bf421e18 0008C (v01 A M I ALASKA 01072009 MSFT 00010013) [ 0.000000] ACPI: FACP 00000000bf41fd98 000F4 (v04 A M I ALASKA 01072009 MSFT 00010013) [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20101013/tbfadt-369) [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBF420F40/0x00000000BF420E40, using 32 (20101013/tbfadt-486) [ 0.000000] ACPI: DSDT 00000000bf418018 06059 (v01 A M I ALASKA 00000001 INTL 20051117) [ 0.000000] ACPI: FACS 00000000bf420f40 00040 [ 0.000000] ACPI: APIC 00000000bf41fc18 00130 (v02 A M I ALASKA 01072009 MSFT 00010013) [ 0.000000] ACPI: SSDT 00000000bf415798 006EE (v01 AMICPU PROC 00000001 MSFT 03000001) [ 0.000000] ACPI: MCFG 00000000bf422f18 0003C (v01 A M I OEMMCFG 01072009 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000bf414c98 00228 (v01 A M I AMI SRAT 00000001 AMI. 00000000) [ 0.000000] ACPI: SLIT 00000000bf422e98 00030 (v01 A M I AMI SLIT 00000000 AMI. 00000000) [ 0.000000] ACPI: HPET 00000000bf422e18 00038 (v01 A M I ICH7HPET 01072009 AMI. 00000003) [ 0.000000] ACPI: SPMI 00000000bf422d98 00040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.000000] ACPI: EINJ 00000000bf41fa98 00130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.000000] ACPI: ERST 00000000bf414a18 00210 (v01 AMIER AMI ERST 00000000 00000000) [ 0.000000] ACPI: HEST 00000000bf414f18 000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.000000] ACPI: BERT 00000000bf422d18 00030 (v01 AMI AMI BERT 00000000 00000000) [ 0.000000] ACPI: DMAR 00000000bf415f18 000D4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x12 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x13 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x14 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x15 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x20 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x21 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x22 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x23 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x24 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x25 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x30 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x31 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x32 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x33 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x34 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x35 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 0-c0000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-240000000 [ 0.000000] SRAT: Node 1 PXM 1 240000000-440000000 [ 0.000000] SRAT: Node 0 [0,c0000000) + [100000000,240000000) -> [0,240000000) [ 0.000000] NUMA: Using 30 for the hash shift. [ 0.000000] Initmem setup node 0 0000000000000000-0000000240000000 [ 0.000000] NODE_DATA [000000023fffb000 - 000000023fffffff] [ 0.000000] Initmem setup node 1 0000000240000000-0000000440000000 [ 0.000000] NODE_DATA [000000043fffa000 - 000000043fffefff] [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237e00000-ffff88023edfffff] on node 0 [ 0.000000] [ffffea0007e00000-ffffea000edfffff] PMD -> [ffff880437e00000-ffff88043edfffff] on node 1 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00440000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009c [ 0.000000] 0: 0x00000100 -> 0x000bf30b [ 0.000000] 0: 0x000bf3dd -> 0x000bf3de [ 0.000000] 0: 0x000bf657 -> 0x000bf800 [ 0.000000] 0: 0x00100000 -> 0x00240000 [ 0.000000] 1: 0x00240000 -> 0x00440000 [ 0.000000] On node 0 totalpages: 2094145 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3918 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 765165 pages, LIFO batch:31 [ 0.000000] Normal zone: 17920 pages used for memmap [ 0.000000] Normal zone: 1292800 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 2097152 [ 0.000000] Normal zone: 28672 pages used for memmap [ 0.000000] Normal zone: 2068480 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x20] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x22] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x24] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x30] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x32] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x34] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x21] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x23] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x31] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x33] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x35] enabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec02000] gsi_base[48]) [ 0.000000] IOAPIC[2]: apic_id 3, version 32, address 0xfec02000, GSI 48-71 [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec90000] gsi_base[72]) [ 0.000000] IOAPIC[3]: apic_id 4, version 32, address 0xfec90000, GSI 72-95 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 24 CPUs, 0 hotplug CPUs [ 0.000000] mapped APIC to ffffffffff5fc000 (fee00000) [ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000) [ 0.000000] mapped IOAPIC to ffffffffff5fa000 (fec01000) [ 0.000000] mapped IOAPIC to ffffffffff5f9000 (fec02000) [ 0.000000] mapped IOAPIC to ffffffffff5f8000 (fec90000) [ 0.000000] nr_irqs_gsi: 112 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf30b000 - 00000000bf38b000 [ 0.000000] PM: Registered nosave memory: 00000000bf38b000 - 00000000bf3a1000 [ 0.000000] PM: Registered nosave memory: 00000000bf3a1000 - 00000000bf3a2000 [ 0.000000] PM: Registered nosave memory: 00000000bf3a2000 - 00000000bf3b3000 [ 0.000000] PM: Registered nosave memory: 00000000bf3b3000 - 00000000bf3b6000 [ 0.000000] PM: Registered nosave memory: 00000000bf3b6000 - 00000000bf3dd000 [ 0.000000] PM: Registered nosave memory: 00000000bf3de000 - 00000000bf3df000 [ 0.000000] PM: Registered nosave memory: 00000000bf3df000 - 00000000bf414000 [ 0.000000] PM: Registered nosave memory: 00000000bf414000 - 00000000bf416000 [ 0.000000] PM: Registered nosave memory: 00000000bf416000 - 00000000bf418000 [ 0.000000] PM: Registered nosave memory: 00000000bf418000 - 00000000bf420000 [ 0.000000] PM: Registered nosave memory: 00000000bf420000 - 00000000bf421000 [ 0.000000] PM: Registered nosave memory: 00000000bf421000 - 00000000bf423000 [ 0.000000] PM: Registered nosave memory: 00000000bf423000 - 00000000bf42b000 [ 0.000000] PM: Registered nosave memory: 00000000bf42b000 - 00000000bf454000 [ 0.000000] PM: Registered nosave memory: 00000000bf454000 - 00000000bf657000 [ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ed1c000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:24 nr_node_ids:2 [ 0.000000] PERCPU: Embedded 475 pages/cpu @ffff8800bb800000 s1916096 r8192 d21312 u2097152 [ 0.000000] pcpu-alloc: s1916096 r8192 d21312 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 12 [0] 13 [ 0.000000] pcpu-alloc: [0] 14 [0] 15 [0] 16 [0] 17 [1] 06 [1] 07 [1] 08 [1] 09 [ 0.000000] pcpu-alloc: [1] 10 [1] 11 [1] 18 [1] 19 [1] 20 [1] 21 [1] 22 [1] 23 [ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 4130363 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: run=/home/wfg/ioless-balance_dirty_pages/test-each-fs.sh debug sched_debug apic=debug panic=10 hung_task_panic=1 softlockup_panic=1 unknown_nmi_panic=1 nmi_watchdog=panic,lapic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 netconsole=@:/eth0,6666@192.168.1.11/00:30:48:fe:19:95 ip=192.168.1.69:192.168.1.11:192.168.1.1:255.255.255.0:lkp-ws02:eth0:none nfsroot=192.168.1.11:/nfsroot/wfg,tcp,v3,rsize=524288,wsize=524288 rw BOOT_IMAGE=x86_64/vmlinuz [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 16361144k/17825792k available (10752k kernel code, 1060604k absent, 404044k reserved, 5468k data, 2812k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:2096 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 6335 kB [ 0.000000] per task-struct memory footprint: 2688 bytes [ 0.000000] allocated 167772160 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] ODEBUG: 31 of 31 active objects replaced [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 2800.194 MHz processor. [ 0.000015] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.38 BogoMIPS (lpj=11200776) [ 0.010960] pid_max: default: 32768 minimum: 301 [ 0.019921] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.032780] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.041756] Mount-cache hash table entries: 256 [ 0.046901] Initializing cgroup subsys debug [ 0.051290] Initializing cgroup subsys ns [ 0.055413] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.064461] Initializing cgroup subsys cpuacct [ 0.069027] Initializing cgroup subsys memory [ 0.073543] Initializing cgroup subsys devices [ 0.078103] Initializing cgroup subsys freezer [ 0.082661] Initializing cgroup subsys blkio [ 0.087149] CPU: Physical Processor ID: 0 [ 0.091276] CPU: Processor Core ID: 0 [ 0.095059] mce: CPU supports 9 MCE banks [ 0.099192] CPU0: Thermal monitoring enabled (TM1) [ 0.104110] using mwait in idle threads. [ 0.108152] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver. [ 0.115756] ... version: 3 [ 0.119880] ... bit width: 48 [ 0.124093] ... generic registers: 4 [ 0.128220] ... value mask: 0000ffffffffffff [ 0.133642] ... max period: 000000007fffffff [ 0.139067] ... fixed-purpose events: 3 [ 0.143193] ... event mask: 000000070000000f [ 0.149709] ACPI: Core revision 20101013 [ 0.175785] ftrace: allocating 33698 entries in 133 pages [ 0.190653] Getting VERSION: 1060015 [ 0.194353] Getting VERSION: 1060015 [ 0.198043] Getting ID: 0 [ 0.200785] Getting ID: 0 [ 0.203518] Setting APIC routing to physical flat [ 0.208337] enabled ExtINT on CPU#0 [ 0.212391] ESR value before enabling vector: 0x00000040 after: 0x00000000 [ 0.219462] ENABLING IO-APIC IRQs [ 0.222894] init IO_APIC IRQs [ 0.225982] 0-0 (apicid-pin) not connected [ 0.230350] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 0.237839] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) [ 0.245329] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) [ 0.252816] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) [ 0.260297] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) [ 0.267778] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) [ 0.275261] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) [ 0.282748] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 0.290236] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0) [ 0.297717] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) [ 0.305372] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) [ 0.313027] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 0.320683] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 0.328338] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) [ 0.335993] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) [ 0.343648] 0-16 0-17 0-18 0-19 0-20 0-21 0-22 0-23 2-0 2-1 2-2 2-3 2-4 2-5 2-6 2-7 2-8 2-9 2-10 2-11 2-12 2-13 2-14 2-15 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 3-0 3-1 3-2 3-3 3-4 3-5 3-6 3-7 3-8 3-9 3-10 3-11 3-12 3-13 3-14 3-15 3-16 3-17 3-18 3-19 3-20 3-21 3-22 3-23 4-0 4-1 4-2 4-3 4-4 4-5 4-6 4-7 4-8 4-9 4-10 4-11 4-12 4-13 4-14 4-15 4-16 4-17 4-18 4-19 4-20 4-21 4-22 4-23 (apicid-pin) not connected [ 0.385390] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.430715] CPU0: Intel(R) Xeon(R) CPU X5660 @ 2.80GHz stepping 01 [ 0.438090] Using local APIC timer interrupts. [ 0.438091] calibrating APIC timer ... [ 0.551701] ... lapic delta = 833352 [ 0.555385] ... PM-Timer delta = 357950 [ 0.559327] ... PM-Timer result ok [ 0.562840] ..... delta 833352 [ 0.566007] ..... mult: 35789958 [ 0.569346] ..... calibration result: 533345 [ 0.573723] ..... CPU clock speed is 2800.0258 MHz. [ 0.578706] ..... host bus clock speed is 133.1345 MHz. [ 0.584715] lockdep: fixing up alternatives. [ 0.589195] Booting Node 0, Processors #1masked ExtINT on CPU#1 [ 0.704289] lockdep: fixing up alternatives. [ 0.708770] #2masked ExtINT on CPU#2 [ 0.820060] lockdep: fixing up alternatives. [ 0.824485] #3masked ExtINT on CPU#3 [ 0.935885] lockdep: fixing up alternatives. [ 0.940313] #4masked ExtINT on CPU#4 [ 1.051613] lockdep: fixing up alternatives. [ 1.056026] #5masked ExtINT on CPU#5 [ 1.167683] lockdep: fixing up alternatives. [ 1.172110] Ok. [ 1.174063] Booting Node 1, Processors #6masked ExtINT on CPU#6 [ 1.290734] TSC synchronization [CPU#0 -> CPU#6]: [ 1.295612] Measured 304 cycles TSC warp between CPUs, turning off TSC clock. [ 0.012000] Marking TSC unstable due to check_tsc_sync_source failed [ 0.984649] lockdep: fixing up alternatives. [ 0.988035] #7masked ExtINT on CPU#7 [ 1.084763] lockdep: fixing up alternatives. [ 1.088033] #8masked ExtINT on CPU#8 [ 1.180721] lockdep: fixing up alternatives. [ 1.184036] #9masked ExtINT on CPU#9 [ 1.276690] lockdep: fixing up alternatives. [ 1.280036] #10masked ExtINT on CPU#10 [ 1.376665] lockdep: fixing up alternatives. [ 1.380036] #11masked ExtINT on CPU#11 [ 1.476489] lockdep: fixing up alternatives. [ 1.480034] Ok. [ 1.481988] Booting Node 0, Processors #12masked ExtINT on CPU#12 [ 1.580454] lockdep: fixing up alternatives. [ 1.584038] #13masked ExtINT on CPU#13 [ 1.676495] lockdep: fixing up alternatives. [ 1.680035] #14masked ExtINT on CPU#14 [ 1.772465] lockdep: fixing up alternatives. [ 1.776036] #15masked ExtINT on CPU#15 [ 1.868436] lockdep: fixing up alternatives. [ 1.872039] #16masked ExtINT on CPU#16 [ 1.964446] lockdep: fixing up alternatives. [ 1.968035] #17masked ExtINT on CPU#17 [ 2.060618] lockdep: fixing up alternatives. [ 2.064039] Ok. [ 2.065987] Booting Node 1, Processors #18masked ExtINT on CPU#18 [ 2.164590] lockdep: fixing up alternatives. [ 2.168032] #19masked ExtINT on CPU#19 [ 2.264577] lockdep: fixing up alternatives. [ 2.268028] #20masked ExtINT on CPU#20 [ 2.360595] lockdep: fixing up alternatives. [ 2.364033] #21masked ExtINT on CPU#21 [ 2.456613] lockdep: fixing up alternatives. [ 2.460032] #22masked ExtINT on CPU#22 [ 2.552510] lockdep: fixing up alternatives. [ 2.556029] #23 Ok. [ 0.012000] masked ExtINT on CPU#23 [ 2.652087] Brought up 24 CPUs [ 2.655248] Total of 24 processors activated (134404.83 BogoMIPS). [ 2.656049] Testing NMI watchdog ... OK. [ 2.744277] CPU0 attaching sched-domain: [ 2.748004] domain 0: span 0,12 level SIBLING [ 2.752002] groups: 0 (cpu_power = 589) 12 (cpu_power = 589) [ 2.758258] domain 1: span 0-5,12-17 level MC [ 2.764002] groups: 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) [ 2.778577] domain 2: span 0-23 level NODE [ 2.784002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 2.792305] CPU1 attaching sched-domain: [ 2.796012] domain 0: span 1,13 level SIBLING [ 2.800002] groups: 1 (cpu_power = 589) 13 (cpu_power = 589) [ 2.806256] domain 1: span 0-5,12-17 level MC [ 2.812002] groups: 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) [ 2.828002] domain 2: span 0-23 level NODE [ 2.832002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 2.840303] CPU2 attaching sched-domain: [ 2.844002] domain 0: span 2,14 level SIBLING [ 2.848002] groups: 2 (cpu_power = 589) 14 (cpu_power = 589) [ 2.854258] domain 1: span 0-5,12-17 level MC [ 2.860002] groups: 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) [ 2.876301] domain 2: span 0-23 level NODE [ 2.880002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 2.888303] CPU3 attaching sched-domain: [ 2.892002] domain 0: span 3,15 level SIBLING [ 2.896002] groups: 3 (cpu_power = 589) 15 (cpu_power = 589) [ 2.903874] domain 1: span 0-5,12-17 level MC [ 2.908002] groups: 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) [ 2.924301] domain 2: span 0-23 level NODE [ 2.928002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 2.936304] CPU4 attaching sched-domain: [ 2.940002] domain 0: span 4,16 level SIBLING [ 2.944002] groups: 4 (cpu_power = 589) 16 (cpu_power = 589) [ 2.952002] domain 1: span 0-5,12-17 level MC [ 2.956002] groups: 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) [ 2.972303] domain 2: span 0-23 level NODE [ 2.976002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 2.984303] CPU5 attaching sched-domain: [ 2.988002] domain 0: span 5,17 level SIBLING [ 2.992002] groups: 5 (cpu_power = 589) 17 (cpu_power = 589) [ 3.000301] domain 1: span 0-5,12-17 level MC [ 3.004002] groups: 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) [ 3.020301] domain 2: span 0-23 level NODE [ 3.024002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.032306] CPU6 attaching sched-domain: [ 3.036002] domain 0: span 6,18 level SIBLING [ 3.040002] groups: 6 (cpu_power = 589) 18 (cpu_power = 589) [ 3.048301] domain 1: span 6-11,18-23 level MC [ 3.052002] groups: 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) [ 3.068303] domain 2: span 0-23 level NODE [ 3.072002] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.082086] CPU7 attaching sched-domain: [ 3.084002] domain 0: span 7,19 level SIBLING [ 3.090298] groups: 7 (cpu_power = 589) 19 (cpu_power = 589) [ 3.096301] domain 1: span 6-11,18-23 level MC [ 3.100002] groups: 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) [ 3.116303] domain 2: span 0-23 level NODE [ 3.122039] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.130087] CPU8 attaching sched-domain: [ 3.132002] domain 0: span 8,20 level SIBLING [ 3.138301] groups: 8 (cpu_power = 589) 20 (cpu_power = 589) [ 3.144303] domain 1: span 6-11,18-23 level MC [ 3.148002] groups: 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) [ 3.166084] domain 2: span 0-23 level NODE [ 3.170042] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.179012] CPU9 attaching sched-domain: [ 3.180002] domain 0: span 9,21 level SIBLING [ 3.186300] groups: 9 (cpu_power = 589) 21 (cpu_power = 589) [ 3.193927] domain 1: span 6-11,18-23 level MC [ 3.198385] groups: 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) [ 3.214575] domain 2: span 0-23 level NODE [ 3.218032] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.227012] CPU10 attaching sched-domain: [ 3.228002] domain 0: span 10,22 level SIBLING [ 3.236002] groups: 10 (cpu_power = 589) 22 (cpu_power = 589) [ 3.242255] domain 1: span 6-11,18-23 level MC [ 3.246386] groups: 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) [ 3.262578] domain 2: span 0-23 level NODE [ 3.268002] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.276304] CPU11 attaching sched-domain: [ 3.280002] domain 0: span 11,23 level SIBLING [ 3.284002] groups: 11 (cpu_power = 589) 23 (cpu_power = 589) [ 3.290256] domain 1: span 6-11,18-23 level MC [ 3.296002] groups: 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) [ 3.312301] domain 2: span 0-23 level NODE [ 3.316002] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.324304] CPU12 attaching sched-domain: [ 3.328002] domain 0: span 0,12 level SIBLING [ 3.332002] groups: 12 (cpu_power = 589) 0 (cpu_power = 589) [ 3.340003] domain 1: span 0-5,12-17 level MC [ 3.344002] groups: 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) [ 3.360303] domain 2: span 0-23 level NODE [ 3.364002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.372303] CPU13 attaching sched-domain: [ 3.376002] domain 0: span 1,13 level SIBLING [ 3.380002] groups: 13 (cpu_power = 589) 1 (cpu_power = 589) [ 3.388301] domain 1: span 0-5,12-17 level MC [ 3.392002] groups: 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) [ 3.408303] domain 2: span 0-23 level NODE [ 3.412002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.420303] CPU14 attaching sched-domain: [ 3.424002] domain 0: span 2,14 level SIBLING [ 3.430299] groups: 14 (cpu_power = 589) 2 (cpu_power = 589) [ 3.436303] domain 1: span 0-5,12-17 level MC [ 3.440002] groups: 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) [ 3.456304] domain 2: span 0-23 level NODE [ 3.460002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.468305] CPU15 attaching sched-domain: [ 3.472002] domain 0: span 3,15 level SIBLING [ 3.478299] groups: 15 (cpu_power = 589) 3 (cpu_power = 589) [ 3.484303] domain 1: span 0-5,12-17 level MC [ 3.488002] groups: 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) [ 3.504301] domain 2: span 0-23 level NODE [ 3.510039] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.518087] CPU16 attaching sched-domain: [ 3.520002] domain 0: span 4,16 level SIBLING [ 3.526299] groups: 16 (cpu_power = 589) 4 (cpu_power = 589) [ 3.532301] domain 1: span 0-5,12-17 level MC [ 3.536002] groups: 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) [ 3.552303] domain 2: span 0-23 level NODE [ 3.558041] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.566087] CPU17 attaching sched-domain: [ 3.568002] domain 0: span 5,17 level SIBLING [ 3.574298] groups: 17 (cpu_power = 589) 5 (cpu_power = 589) [ 3.580301] domain 1: span 0-5,12-17 level MC [ 3.584001] groups: 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) [ 3.602084] domain 2: span 0-23 level NODE [ 3.606039] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.614079] CPU18 attaching sched-domain: [ 3.616002] domain 0: span 6,18 level SIBLING [ 3.620002] groups: 18 (cpu_power = 589) 6 (cpu_power = 589) [ 3.626169] domain 1: span 6-11,18-23 level MC [ 3.632001] groups: 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) [ 3.648301] domain 2: span 0-23 level NODE [ 3.652001] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.660307] CPU19 attaching sched-domain: [ 3.664002] domain 0: span 7,19 level SIBLING [ 3.668001] groups: 19 (cpu_power = 589) 7 (cpu_power = 589) [ 3.675787] domain 1: span 6-11,18-23 level MC [ 3.680001] groups: 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) [ 3.696303] domain 2: span 0-23 level NODE [ 3.700001] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.708304] CPU20 attaching sched-domain: [ 3.712002] domain 0: span 8,20 level SIBLING [ 3.716001] groups: 20 (cpu_power = 589) 8 (cpu_power = 589) [ 3.724301] domain 1: span 6-11,18-23 level MC [ 3.728001] groups: 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) [ 3.744301] domain 2: span 0-23 level NODE [ 3.748002] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.756304] CPU21 attaching sched-domain: [ 3.760002] domain 0: span 9,21 level SIBLING [ 3.766299] groups: 21 (cpu_power = 589) 9 (cpu_power = 589) [ 3.772301] domain 1: span 6-11,18-23 level MC [ 3.776002] groups: 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) [ 3.792301] domain 2: span 0-23 level NODE [ 3.798040] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.806084] CPU22 attaching sched-domain: [ 3.808002] domain 0: span 10,22 level SIBLING [ 3.814379] groups: 22 (cpu_power = 589) 10 (cpu_power = 589) [ 3.820303] domain 1: span 6-11,18-23 level MC [ 3.826384] groups: 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) [ 3.842575] domain 2: span 0-23 level NODE [ 3.846040] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.855012] CPU23 attaching sched-domain: [ 3.856002] domain 0: span 11,23 level SIBLING [ 3.864002] groups: 23 (cpu_power = 589) 11 (cpu_power = 589) [ 3.870257] domain 1: span 6-11,18-23 level MC [ 3.874386] groups: 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) [ 3.890663] domain 2: span 0-23 level NODE [ 3.896002] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.904774] kworker/u:0 used greatest stack depth: 6080 bytes left [ 3.911629] kworker/u:0 used greatest stack depth: 5400 bytes left [ 3.928540] xor: automatically using best checksumming function: generic_sse [ 3.952003] generic_sse: 10590.000 MB/sec [ 3.956004] xor: using function: generic_sse (10590.000 MB/sec) [ 3.960089] Time: 19:26:37 Date: 12/31/10 [ 3.964242] NET: Registered protocol family 16 [ 3.972593] ACPI: bus type pci registered [ 3.976147] dca service started, version 1.12.1 [ 3.980080] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) [ 3.984006] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820 [ 4.072257] PCI: Using configuration type 1 for base access [ 4.111051] bio: create slab at 0 [ 4.180019] raid6: int64x1 2305 MB/s [ 4.248005] raid6: int64x2 2894 MB/s [ 4.316013] raid6: int64x4 2267 MB/s [ 4.384004] raid6: int64x8 2253 MB/s [ 4.452008] raid6: sse2x1 6868 MB/s [ 4.520009] raid6: sse2x2 8046 MB/s [ 4.588007] raid6: sse2x4 8943 MB/s [ 4.591862] raid6: using algorithm sse2x4 (8943 MB/s) [ 4.598659] ACPI: EC: Look up EC in DSDT [ 4.604526] \_SB_:_OSC evaluation returned wrong type [ 4.608003] _OSC request data:1 6 [ 4.618598] ACPI: Executed 1 blocks of module-level executable AML code [ 4.700335] ACPI: SSDT 00000000bf416018 01494 (v01 AMI IST 00000001 MSFT 03000001) [ 4.708886] ACPI: Dynamic OEM Table Load: [ 4.712301] ACPI: SSDT (null) 01494 (v01 AMI IST 00000001 MSFT 03000001) [ 4.733347] ACPI: Interpreter enabled [ 4.736006] ACPI: (supports S0 S4 S5) [ 4.741094] ACPI: Using IOAPIC for interrupt routing [ 4.748265] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 4.756178] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 4.765538] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 4.774224] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 4.782135] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 4.808303] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 4.820586] ACPI: No dock devices found. [ 4.824006] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 4.828629] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 4.832328] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 4.836005] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 4.840003] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 4.844003] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff] [ 4.848032] pci 0000:00:00.0: [8086:3406] type 0 class 0x000600 [ 4.852076] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 4.856005] pci 0000:00:00.0: PME# disabled [ 4.860029] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604 [ 4.864067] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 4.868007] pci 0000:00:01.0: PME# disabled [ 4.872033] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604 [ 4.876066] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 4.880004] pci 0000:00:03.0: PME# disabled [ 4.884035] pci 0000:00:05.0: [8086:340c] type 1 class 0x000604 [ 4.888067] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 4.892005] pci 0000:00:05.0: PME# disabled [ 4.896029] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604 [ 4.900066] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 4.904004] pci 0000:00:07.0: PME# disabled [ 4.908029] pci 0000:00:09.0: [8086:3410] type 1 class 0x000604 [ 4.912066] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 4.916004] pci 0000:00:09.0: PME# disabled [ 4.920038] pci 0000:00:13.0: [8086:342d] type 0 class 0x000800 [ 4.924016] pci 0000:00:13.0: reg 10: [mem 0xfbe24000-0xfbe24fff] [ 4.928064] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 4.932004] pci 0000:00:13.0: PME# disabled [ 4.936025] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800 [ 4.940090] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800 [ 4.948004] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800 [ 4.952084] pci 0000:00:14.3: [8086:3438] type 0 class 0x000800 [ 4.956087] pci 0000:00:16.0: [8086:3430] type 0 class 0x000880 [ 4.960018] pci 0000:00:16.0: reg 10: [mem 0xfbe1c000-0xfbe1ffff 64bit] [ 4.964087] pci 0000:00:16.1: [8086:3431] type 0 class 0x000880 [ 4.968018] pci 0000:00:16.1: reg 10: [mem 0xfbe18000-0xfbe1bfff 64bit] [ 4.972087] pci 0000:00:16.2: [8086:3432] type 0 class 0x000880 [ 4.976018] pci 0000:00:16.2: reg 10: [mem 0xfbe14000-0xfbe17fff 64bit] [ 4.980090] pci 0000:00:16.3: [8086:3433] type 0 class 0x000880 [ 4.984018] pci 0000:00:16.3: reg 10: [mem 0xfbe10000-0xfbe13fff 64bit] [ 4.988090] pci 0000:00:16.4: [8086:3429] type 0 class 0x000880 [ 4.992018] pci 0000:00:16.4: reg 10: [mem 0xfbe0c000-0xfbe0ffff 64bit] [ 4.996087] pci 0000:00:16.5: [8086:342a] type 0 class 0x000880 [ 5.000017] pci 0000:00:16.5: reg 10: [mem 0xfbe08000-0xfbe0bfff 64bit] [ 5.004087] pci 0000:00:16.6: [8086:342b] type 0 class 0x000880 [ 5.008018] pci 0000:00:16.6: reg 10: [mem 0xfbe04000-0xfbe07fff 64bit] [ 5.012090] pci 0000:00:16.7: [8086:342c] type 0 class 0x000880 [ 5.016018] pci 0000:00:16.7: reg 10: [mem 0xfbe00000-0xfbe03fff 64bit] [ 5.020095] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03 [ 5.024058] pci 0000:00:1a.0: reg 20: [io 0xf0c0-0xf0df] [ 5.028061] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03 [ 5.032058] pci 0000:00:1a.2: reg 20: [io 0xf0a0-0xf0bf] [ 5.036075] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03 [ 5.040028] pci 0000:00:1a.7: reg 10: [mem 0xfbe23000-0xfbe233ff] [ 5.044097] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 5.048007] pci 0000:00:1a.7: PME# disabled [ 5.052028] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604 [ 5.056077] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 5.060005] pci 0000:00:1c.0: PME# disabled [ 5.064031] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604 [ 5.068077] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 5.072005] pci 0000:00:1c.4: PME# disabled [ 5.076035] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03 [ 5.080058] pci 0000:00:1d.0: reg 20: [io 0xf080-0xf09f] [ 5.084060] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03 [ 5.088058] pci 0000:00:1d.1: reg 20: [io 0xf060-0xf07f] [ 5.092062] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03 [ 5.096058] pci 0000:00:1d.2: reg 20: [io 0xf040-0xf05f] [ 5.100072] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03 [ 5.104028] pci 0000:00:1d.7: reg 10: [mem 0xfbe22000-0xfbe223ff] [ 5.108097] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 5.112005] pci 0000:00:1d.7: PME# disabled [ 5.116028] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 5.120077] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601 [ 5.124098] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO [ 5.128005] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO [ 5.132004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0600 (mask 00ff) [ 5.136004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f) [ 5.140004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 001f) [ 5.144004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0ca0 (mask 000f) [ 5.148053] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106 [ 5.152026] pci 0000:00:1f.2: reg 10: [io 0xf110-0xf117] [ 5.156011] pci 0000:00:1f.2: reg 14: [io 0xf100-0xf103] [ 5.160011] pci 0000:00:1f.2: reg 18: [io 0xf0f0-0xf0f7] [ 5.164011] pci 0000:00:1f.2: reg 1c: [io 0xf0e0-0xf0e3] [ 5.168011] pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f] [ 5.172011] pci 0000:00:1f.2: reg 24: [mem 0xfbe21000-0xfbe217ff] [ 5.176049] pci 0000:00:1f.2: PME# supported from D3hot [ 5.180005] pci 0000:00:1f.2: PME# disabled [ 5.184023] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05 [ 5.188020] pci 0000:00:1f.3: reg 10: [mem 0xfbe20000-0xfbe200ff 64bit] [ 5.192029] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f] [ 5.196108] pci 0000:01:00.0: [8086:10c9] type 0 class 0x000200 [ 5.200017] pci 0000:01:00.0: reg 10: [mem 0xfbaa0000-0xfbabffff] [ 5.204012] pci 0000:01:00.0: reg 14: [mem 0xfba80000-0xfba9ffff] [ 5.208012] pci 0000:01:00.0: reg 18: [io 0xe020-0xe03f] [ 5.212012] pci 0000:01:00.0: reg 1c: [mem 0xfbb44000-0xfbb47fff] [ 5.216032] pci 0000:01:00.0: reg 30: [mem 0xfba60000-0xfba7ffff pref] [ 5.220040] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 5.224005] pci 0000:01:00.0: PME# disabled [ 5.228050] pci 0000:01:00.1: [8086:10c9] type 0 class 0x000200 [ 5.232016] pci 0000:01:00.1: reg 10: [mem 0xfba40000-0xfba5ffff] [ 5.236012] pci 0000:01:00.1: reg 14: [mem 0xfba20000-0xfba3ffff] [ 5.240012] pci 0000:01:00.1: reg 18: [io 0xe000-0xe01f] [ 5.244012] pci 0000:01:00.1: reg 1c: [mem 0xfbb40000-0xfbb43fff] [ 5.248032] pci 0000:01:00.1: reg 30: [mem 0xfba00000-0xfba1ffff pref] [ 5.252039] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 5.256005] pci 0000:01:00.1: PME# disabled [ 5.260021] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 5.264005] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 5.268005] pci 0000:00:01.0: bridge window [mem 0xfba00000-0xfbbfffff] [ 5.272007] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.276053] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 5.280005] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled) [ 5.284005] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 5.288007] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.292052] pci 0000:00:05.0: PCI bridge to [bus 04-04] [ 5.296005] pci 0000:00:05.0: bridge window [io 0xf000-0x0000] (disabled) [ 5.300005] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 5.304008] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.308052] pci 0000:00:07.0: PCI bridge to [bus 05-05] [ 5.312005] pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled) [ 5.316004] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 5.320007] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.324061] pci 0000:06:00.0: [8086:0329] type 1 class 0x000604 [ 5.328023] pci 0000:06:00.0: PXH quirk detected; SHPC device MSI disabled [ 5.332065] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 5.336005] pci 0000:06:00.0: PME# disabled [ 5.340030] pci 0000:06:00.2: [8086:032a] type 1 class 0x000604 [ 5.344022] pci 0000:06:00.2: PXH quirk detected; SHPC device MSI disabled [ 5.348065] pci 0000:06:00.2: PME# supported from D0 D3hot D3cold [ 5.352004] pci 0000:06:00.2: PME# disabled [ 5.356021] pci 0000:00:09.0: PCI bridge to [bus 06-08] [ 5.360005] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 5.364005] pci 0000:00:09.0: bridge window [mem 0xfb700000-0xfb9fffff] [ 5.368007] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.372090] pci 0000:06:00.0: PCI bridge to [bus 07-07] [ 5.376005] pci 0000:06:00.0: bridge window [io 0xf000-0x0000] (disabled) [ 5.380005] pci 0000:06:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 5.384008] pci 0000:06:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.388060] pci 0000:08:01.0: [8086:1229] type 0 class 0x000200 [ 5.392022] pci 0000:08:01.0: reg 10: [mem 0xfb900000-0xfb900fff] [ 5.396013] pci 0000:08:01.0: reg 14: [io 0xd000-0xd03f] [ 5.400013] pci 0000:08:01.0: reg 18: [mem 0xfb800000-0xfb8fffff] [ 5.404043] pci 0000:08:01.0: reg 30: [mem 0xfb700000-0xfb7fffff pref] [ 5.408024] pci 0000:08:01.0: supports D1 D2 [ 5.412002] pci 0000:08:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 5.416015] pci 0000:08:01.0: PME# disabled [ 5.420061] pci 0000:06:00.2: PCI bridge to [bus 08-08] [ 5.424005] pci 0000:06:00.2: bridge window [io 0xd000-0xdfff] [ 5.428005] pci 0000:06:00.2: bridge window [mem 0xfb700000-0xfb9fffff] [ 5.432008] pci 0000:06:00.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.436085] pci 0000:09:00.0: [1000:0058] type 0 class 0x000100 [ 5.440019] pci 0000:09:00.0: reg 10: [io 0xc000-0xc0ff] [ 5.444021] pci 0000:09:00.0: reg 14: [mem 0xfb610000-0xfb613fff 64bit] [ 5.448021] pci 0000:09:00.0: reg 1c: [mem 0xfb600000-0xfb60ffff 64bit] [ 5.452025] pci 0000:09:00.0: reg 30: [mem 0xfb400000-0xfb5fffff pref] [ 5.456039] pci 0000:09:00.0: supports D1 D2 [ 5.460021] pci 0000:00:1c.0: PCI bridge to [bus 09-09] [ 5.464005] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff] [ 5.468005] pci 0000:00:1c.0: bridge window [mem 0xfb400000-0xfb6fffff] [ 5.472007] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.476075] pci 0000:0a:00.0: [197b:2368] type 0 class 0x000101 [ 5.480036] pci 0000:0a:00.0: reg 10: [io 0xb040-0xb047] [ 5.484017] pci 0000:0a:00.0: reg 14: [io 0xb030-0xb033] [ 5.488017] pci 0000:0a:00.0: reg 18: [io 0xb020-0xb027] [ 5.492017] pci 0000:0a:00.0: reg 1c: [io 0xb010-0xb013] [ 5.496017] pci 0000:0a:00.0: reg 20: [io 0xb000-0xb00f] [ 5.500032] pci 0000:0a:00.0: reg 30: [mem 0xfbd00000-0xfbd0ffff pref] [ 5.504065] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a] [ 5.508005] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 5.512005] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff] [ 5.516007] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.520045] pci 0000:0b:01.0: [1002:515e] type 0 class 0x000300 [ 5.524023] pci 0000:0b:01.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] [ 5.528013] pci 0000:0b:01.0: reg 14: [io 0xa000-0xa0ff] [ 5.532013] pci 0000:0b:01.0: reg 18: [mem 0xfbc20000-0xfbc2ffff] [ 5.536045] pci 0000:0b:01.0: reg 30: [mem 0xfbc00000-0xfbc1ffff pref] [ 5.540025] pci 0000:0b:01.0: supports D1 D2 [ 5.544063] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] (subtractive decode) [ 5.548005] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 5.552005] pci 0000:00:1e.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 5.556007] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 5.560005] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 5.564003] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 5.568003] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 5.572003] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) [ 5.576046] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 5.584920] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 5.588298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 5.592169] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 5.596240] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT] [ 5.600148] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9.PXHA._PRT] [ 5.604226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9.PXHB._PRT] [ 5.673056] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 5.679246] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 5.683234] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 5.691002] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 5.699003] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 5.707000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 5.715002] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 5.723002] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15) [ 5.730976] vgaarb: device added: PCI:0000:0b:01.0,decodes=io+mem,owns=io+mem,locks=none [ 5.732007] vgaarb: loaded [ 5.736469] SCSI subsystem initialized [ 5.740083] libata version 3.00 loaded. [ 5.744105] usbcore: registered new interface driver usbfs [ 5.748096] usbcore: registered new interface driver hub [ 5.752083] usbcore: registered new device driver usb [ 5.756486] wmi: Mapper loaded [ 5.760076] Advanced Linux Sound Architecture Driver Version 1.0.23. [ 5.764003] PCI: Using ACPI for IRQ routing [ 5.768005] PCI: pci_cache_line_size set to 64 bytes [ 5.772293] reserve RAM buffer: 000000000009c400 - 000000000009ffff [ 5.776004] reserve RAM buffer: 00000000bf30b000 - 00000000bfffffff [ 5.780018] reserve RAM buffer: 00000000bf3de000 - 00000000bfffffff [ 5.788008] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff [ 5.792190] [ 5.792190] printing PIC contents [ 5.796006] ... PIC IMR: ffff [ 5.799166] ... PIC IRR: 0c20 [ 5.800003] ... PIC ISR: 0000 [ 5.804004] ... PIC ELCR: 0c20 [ 5.808002] printing local APIC contents on CPU#0/0: [ 5.812000] ... APIC ID: 00000000 (0) [ 5.812000] ... APIC VERSION: 01060015 [ 5.812000] ... APIC TASKPRI: 00000000 (00) [ 5.812000] ... APIC PROCPRI: 00000000 [ 5.812000] ... APIC LDR: 01000000 [ 5.812000] ... APIC DFR: ffffffff [ 5.812000] ... APIC SPIV: 000001ff [ 5.812000] ... APIC ISR field: [ 5.812000] 0000000000000000000000000000000000000000000000000000000000000000 [ 5.812000] ... APIC TMR field: [ 5.812000] 0000000000000000000000000000000000000000000000000000000000000000 [ 5.812000] ... APIC IRR field: [ 5.812000] 0000000000000000000000000000000000000000000000000000000000008000 [ 5.812000] ... APIC ESR: 00000000 [ 5.812000] ... APIC ICR: 000000fc [ 5.812000] ... APIC ICR2: 35000000 [ 5.812000] ... APIC LVTT: 000200ef [ 5.812000] ... APIC LVTPC: 00000400 [ 5.812000] ... APIC LVT0: 00010700 [ 5.812000] ... APIC LVT1: 00000400 [ 5.812000] ... APIC LVTERR: 000000fe [ 5.812000] ... APIC TMICT: 00008236 [ 5.812000] ... APIC TMCCT: 000003db [ 5.812000] ... APIC TDCR: 00000003 [ 5.812000] [ 5.812004] number of MP IRQ sources: 15. [ 5.816003] number of IO-APIC #0 registers: 24. [ 5.820002] number of IO-APIC #2 registers: 24. [ 5.824002] number of IO-APIC #3 registers: 24. [ 5.828004] number of IO-APIC #4 registers: 24. [ 5.832002] testing the IO APIC....................... [ 5.836007] [ 5.837607] IO APIC #0...... [ 5.840002] .... register #00: 00000000 [ 5.844003] ....... : physical APIC id: 00 [ 5.848002] ....... : Delivery Type: 0 [ 5.852002] ....... : LTS : 0 [ 5.856002] .... register #01: 00170020 [ 5.860003] ....... : max redirection entries: 0017 [ 5.864002] ....... : PRQ implemented: 0 [ 5.868002] ....... : IO APIC version: 0020 [ 5.872002] .... IRQ redirection table: [ 5.876004] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 5.880005] 00 000 1 0 0 0 0 0 0 00 [ 5.884005] 01 000 0 0 0 0 0 0 0 31 [ 5.892006] 02 000 0 0 0 0 0 0 0 30 [ 5.896004] 03 000 0 0 0 0 0 0 0 33 [ 5.903342] 04 000 0 0 0 0 0 0 0 34 [ 5.908006] 05 000 0 0 0 0 0 0 0 35 [ 5.912005] 06 000 0 0 0 0 0 0 0 36 [ 5.919339] 07 000 0 0 0 0 0 0 0 37 [ 5.924006] 08 000 0 0 0 0 0 0 0 38 [ 5.928004] 09 000 0 1 0 0 0 0 0 39 [ 5.936004] 0a 000 0 0 0 0 0 0 0 3A [ 5.940006] 0b 000 0 0 0 0 0 0 0 3B [ 5.944005] 0c 000 0 0 0 0 0 0 0 3C [ 5.952004] 0d 000 0 0 0 0 0 0 0 3D [ 5.956006] 0e 000 0 0 0 0 0 0 0 3E [ 5.960005] 0f 000 0 0 0 0 0 0 0 3F [ 5.968004] 10 000 1 0 0 0 0 0 0 00 [ 5.972006] 11 000 1 0 0 0 0 0 0 00 [ 5.979340] 12 000 1 0 0 0 0 0 0 00 [ 5.984005] 13 000 1 0 0 0 0 0 0 00 [ 5.988006] 14 000 1 0 0 0 0 0 0 00 [ 5.995339] 15 070 1 0 0 0 0 0 2 73 [ 6.000004] 16 000 1 0 0 0 0 0 0 00 [ 6.004006] 17 000 1 0 0 0 0 0 0 00 [ 6.011339] [ 6.012002] IO APIC #2...... [ 6.016002] .... register #00: 02000000 [ 6.020003] ....... : physical APIC id: 02 [ 6.024002] ....... : Delivery Type: 0 [ 6.028002] ....... : LTS : 0 [ 6.032002] .... register #01: 00178020 [ 6.036003] ....... : max redirection entries: 0017 [ 6.040002] ....... : PRQ implemented: 1 [ 6.044002] ....... : IO APIC version: 0020 [ 6.048002] .... register #02: 02000000 [ 6.052004] ....... : arbitration: 02 [ 6.056002] .... register #03: 00000001 [ 6.060002] ....... : Boot DT : 1 [ 6.064002] .... IRQ redirection table: [ 6.068003] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 6.072004] 00 000 1 0 0 0 0 0 0 00 [ 6.076003] 01 000 1 0 0 0 0 0 0 00 [ 6.083340] 02 000 1 0 0 0 0 0 0 00 [ 6.088003] 03 000 1 0 0 0 0 0 0 00 [ 6.092003] 04 000 1 0 0 0 0 0 0 00 [ 6.100005] 05 000 1 0 0 0 0 0 0 00 [ 6.104003] 06 000 1 0 0 0 0 0 0 00 [ 6.108003] 07 000 1 0 0 0 0 0 0 00 [ 6.116005] 08 000 1 0 0 0 0 0 0 00 [ 6.120003] 09 000 1 0 0 0 0 0 0 00 [ 6.124003] 0a 000 1 0 0 0 0 0 0 00 [ 6.132005] 0b 000 1 0 0 0 0 0 0 00 [ 6.136003] 0c 000 1 0 0 0 0 0 0 00 [ 6.140003] 0d 000 1 0 0 0 0 0 0 00 [ 6.148005] 0e 000 1 0 0 0 0 0 0 00 [ 6.152003] 0f 000 1 0 0 0 0 0 0 00 [ 6.159339] 10 000 1 0 0 0 0 0 0 00 [ 6.164005] 11 000 1 0 0 0 0 0 0 00 [ 6.168003] 12 000 1 0 0 0 0 0 0 00 [ 6.175340] 13 000 1 0 0 0 0 0 0 00 [ 6.180005] 14 000 1 0 0 0 0 0 0 00 [ 6.184003] 15 000 1 0 0 0 0 0 0 00 [ 6.192003] 16 000 1 0 0 0 0 0 0 00 [ 6.196005] 17 000 1 0 0 0 0 0 0 00 [ 6.200006] [ 6.204002] IO APIC #3...... [ 6.206992] .... register #00: 03000000 [ 6.208002] ....... : physical APIC id: 03 [ 6.212003] ....... : Delivery Type: 0 [ 6.220001] ....... : LTS : 0 [ 6.224002] .... register #01: 00178020 [ 6.228004] ....... : max redirection entries: 0017 [ 6.232002] ....... : PRQ implemented: 1 [ 6.236002] ....... : IO APIC version: 0020 [ 6.240002] .... register #02: 03000000 [ 6.244003] ....... : arbitration: 03 [ 6.248002] .... register #03: 00000001 [ 6.252002] ....... : Boot DT : 1 [ 6.256002] .... IRQ redirection table: [ 6.260003] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 6.264003] 00 000 1 0 0 0 0 0 0 00 [ 6.268003] 01 000 1 0 0 0 0 0 0 00 [ 6.272003] 02 000 1 0 0 0 0 0 0 00 [ 6.280003] 03 000 1 0 0 0 0 0 0 00 [ 6.284003] 04 000 1 0 0 0 0 0 0 00 [ 6.288003] 05 000 1 0 0 0 0 0 0 00 [ 6.296003] 06 000 1 0 0 0 0 0 0 00 [ 6.300003] 07 000 1 0 0 0 0 0 0 00 [ 6.304003] 08 000 1 0 0 0 0 0 0 00 [ 6.312003] 09 000 1 0 0 0 0 0 0 00 [ 6.316003] 0a 000 1 0 0 0 0 0 0 00 [ 6.323337] 0b 000 1 0 0 0 0 0 0 00 [ 6.328004] 0c 000 1 0 0 0 0 0 0 00 [ 6.332003] 0d 000 1 0 0 0 0 0 0 00 [ 6.339340] 0e 000 1 0 0 0 0 0 0 00 [ 6.344003] 0f 000 1 0 0 0 0 0 0 00 [ 6.348003] 10 000 1 0 0 0 0 0 0 00 [ 6.355338] 11 000 1 0 0 0 0 0 0 00 [ 6.360003] 12 000 1 0 0 0 0 0 0 00 [ 6.364003] 13 000 1 0 0 0 0 0 0 00 [ 6.372005] 14 000 1 0 0 0 0 0 0 00 [ 6.376003] 15 000 1 0 0 0 0 0 0 00 [ 6.380003] 16 000 1 0 0 0 0 0 0 00 [ 6.388005] 17 000 1 0 0 0 0 0 0 00 [ 6.392005] [ 6.393607] IO APIC #4...... [ 6.396002] .... register #00: 04000000 [ 6.400002] ....... : physical APIC id: 04 [ 6.404003] ....... : Delivery Type: 0 [ 6.408002] ....... : LTS : 0 [ 6.412002] .... register #01: 00170020 [ 6.416002] ....... : max redirection entries: 0017 [ 6.420003] ....... : PRQ implemented: 0 [ 6.424002] ....... : IO APIC version: 0020 [ 6.428002] .... register #02: 00000000 [ 6.432002] ....... : arbitration: 00 [ 6.436003] .... register #03: 00000001 [ 6.440002] ....... : Boot DT : 1 [ 6.444002] .... IRQ redirection table: [ 6.448002] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 6.452005] 00 000 1 0 0 0 0 0 0 00 [ 6.460003] 01 000 1 0 0 0 0 0 0 00 [ 6.464003] 02 000 1 0 0 0 0 0 0 00 [ 6.468005] 03 000 1 0 0 0 0 0 0 00 [ 6.476004] 04 000 1 0 0 0 0 0 0 00 [ 6.480003] 05 000 1 0 0 0 0 0 0 00 [ 6.487340] 06 000 1 0 0 0 0 0 0 00 [ 6.492003] 07 000 1 0 0 0 0 0 0 00 [ 6.496003] 08 000 1 0 0 0 0 0 0 00 [ 6.503340] 09 000 1 0 0 0 0 0 0 00 [ 6.508004] 0a 000 1 0 0 0 0 0 0 00 [ 6.512003] 0b 000 1 0 0 0 0 0 0 00 [ 6.519339] 0c 000 1 0 0 0 0 0 0 00 [ 6.524003] 0d 000 1 0 0 0 0 0 0 00 [ 6.528004] 0e 000 1 0 0 0 0 0 0 00 [ 6.536003] 0f 000 1 0 0 0 0 0 0 00 [ 6.540004] 10 000 1 0 0 0 0 0 0 00 [ 6.544004] 11 000 1 0 0 0 0 0 0 00 [ 6.552004] 12 000 1 0 0 0 0 0 0 00 [ 6.556003] 13 000 1 0 0 0 0 0 0 00 [ 6.560004] 14 000 1 0 0 0 0 0 0 00 [ 6.568003] 15 000 1 0 0 0 0 0 0 00 [ 6.572004] 16 000 1 0 0 0 0 0 0 00 [ 6.579340] 17 000 1 0 0 0 0 0 0 00 [ 6.584002] IRQ to pin mappings: [ 6.588002] IRQ0 -> 0:2 [ 6.592002] IRQ1 -> 0:1 [ 6.594679] IRQ3 -> 0:3 [ 6.596888] IRQ4 -> 0:4 [ 6.600300] IRQ5 -> 0:5 [ 6.602984] IRQ6 -> 0:6 [ 6.604888] IRQ7 -> 0:7 [ 6.608300] IRQ8 -> 0:8 [ 6.610982] IRQ9 -> 0:9 [ 6.612890] IRQ10 -> 0:10 [ 6.616300] IRQ11 -> 0:11 [ 6.619156] IRQ12 -> 0:12 [ 6.620974] IRQ13 -> 0:13 [ 6.624977] IRQ14 -> 0:14 [ 6.628003] IRQ15 -> 0:15 [ 6.630854] .................................... done. [ 6.632007] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 6.637504] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 6.645004] Switching to clocksource hpet [ 6.682560] pnp: PnP ACPI init [ 6.685777] ACPI: bus type pnp registered [ 6.690115] pnp 00:00: [bus 00-ff] [ 6.693639] pnp 00:00: [io 0x0cf8-0x0cff] [ 6.697858] pnp 00:00: [io 0x0000-0x0cf7 window] [ 6.702685] pnp 00:00: [io 0x0d00-0xffff window] [ 6.707511] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 6.713036] pnp 00:00: [mem 0x00000000 window] [ 6.717599] pnp 00:00: [mem 0xc0000000-0xffffffff window] [ 6.723402] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 6.730838] pnp 00:01: [mem 0xfc000000-0xfcffffff] [ 6.735748] pnp 00:01: [mem 0xfd000000-0xfdffffff] [ 6.740661] pnp 00:01: [mem 0xfe000000-0xfe9fffff] [ 6.745576] pnp 00:01: [mem 0xfea00000-0xfea0001f] [ 6.750489] pnp 00:01: [mem 0xfeb00000-0xfebfffff] [ 6.755402] pnp 00:01: [mem 0xfed00400-0xfed3ffff] [ 6.760316] pnp 00:01: [mem 0xfed45000-0xfedfffff] [ 6.765493] pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 6.772730] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 6.778780] pnp 00:02: [io 0x0290-0x029f] [ 6.782998] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 6.789040] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 6.795079] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 6.801387] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 6.808118] pnp 00:03: [io 0x0060] [ 6.811713] pnp 00:03: [io 0x0064] [ 6.815340] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 6.822842] pnp 00:03: [irq 1] [ 6.826193] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 6.833732] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 6.841408] pnp 00:04: [irq 12] [ 6.844845] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 6.853826] pnp 00:05: [io 0x03f8-0x03ff] [ 6.858057] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) [ 6.865560] pnp 00:05: [irq 4] [ 6.868738] pnp 00:05: [dma 0 disabled] [ 6.872912] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 6.880639] pnp 00:06: [io 0x02f8-0x02ff] [ 6.884863] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) [ 6.892358] pnp 00:06: [irq 3] [ 6.895522] pnp 00:06: [dma 0 disabled] [ 6.899701] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 6.906890] pnp 00:07: [dma 4] [ 6.910069] pnp 00:07: [io 0x0000-0x000f] [ 6.914289] pnp 00:07: [io 0x0081-0x0083] [ 6.918509] pnp 00:07: [io 0x0087] [ 6.922122] pnp 00:07: [io 0x0089-0x008b] [ 6.926344] pnp 00:07: [io 0x008f] [ 6.929950] pnp 00:07: [io 0x00c0-0x00df] [ 6.934348] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active) [ 6.941037] pnp 00:08: [io 0x0070-0x0071] [ 6.945256] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 6.952754] pnp 00:08: [irq 8] [ 6.956109] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active) [ 6.962787] pnp 00:09: [io 0x0061] [ 6.966577] pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active) [ 6.973286] pnp 00:0a: [io 0x0010-0x001f] [ 6.977504] pnp 00:0a: [io 0x0022-0x003f] [ 6.981725] pnp 00:0a: [io 0x0044-0x005f] [ 6.985943] pnp 00:0a: [io 0x0062-0x0063] [ 6.990156] pnp 00:0a: [io 0x0065-0x006f] [ 6.994377] pnp 00:0a: [io 0x0072-0x007f] [ 6.998599] pnp 00:0a: [io 0x0080] [ 7.002210] pnp 00:0a: [io 0x0084-0x0086] [ 7.006431] pnp 00:0a: [io 0x0088] [ 7.010037] pnp 00:0a: [io 0x008c-0x008e] [ 7.014259] pnp 00:0a: [io 0x0090-0x009f] [ 7.018480] pnp 00:0a: [io 0x00a2-0x00bf] [ 7.022699] pnp 00:0a: [io 0x00e0-0x00ef] [ 7.026918] pnp 00:0a: [io 0x04d0-0x04d1] [ 7.031412] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 7.038094] pnp 00:0b: [io 0x00f0-0x00ff] [ 7.042314] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 7.049985] pnp 00:0b: [irq 13] [ 7.053423] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active) [ 7.060803] pnp 00:0c: [io 0x0400-0x047f] [ 7.065029] pnp 00:0c: [io 0x1180-0x119f] [ 7.069248] pnp 00:0c: [io 0x0500-0x057f] [ 7.073469] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff] [ 7.078382] pnp 00:0c: [mem 0xfec00000-0xfecfffff] [ 7.083297] pnp 00:0c: [mem 0xff000000-0xffffffff] [ 7.088482] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 7.095619] pnp 00:0d: [mem 0xfed00000-0xfed003ff] [ 7.100767] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active) [ 7.108059] pnp: PnP ACPI: found 14 devices [ 7.112365] ACPI: ACPI bus type pnp unregistered [ 7.117121] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved [ 7.123856] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved [ 7.130591] system 00:01: [mem 0xfe000000-0xfe9fffff] has been reserved [ 7.137325] system 00:01: [mem 0xfea00000-0xfea0001f] has been reserved [ 7.144060] system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved [ 7.150794] system 00:01: [mem 0xfed00400-0xfed3ffff] could not be reserved [ 7.157872] system 00:01: [mem 0xfed45000-0xfedfffff] has been reserved [ 7.164615] system 00:02: [io 0x0290-0x029f] has been reserved [ 7.170666] system 00:0a: [io 0x04d0-0x04d1] has been reserved [ 7.176713] system 00:0c: [io 0x0400-0x047f] has been reserved [ 7.182757] system 00:0c: [io 0x1180-0x119f] has been reserved [ 7.188795] system 00:0c: [io 0x0500-0x057f] could not be reserved [ 7.195184] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 7.201919] system 00:0c: [mem 0xfec00000-0xfecfffff] could not be reserved [ 7.209010] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved [ 7.231179] pci 0000:00:1c.0: BAR 9: assigned [mem 0xd0000000-0xd01fffff 64bit pref] [ 7.239118] pci 0000:00:1c.4: BAR 9: assigned [mem 0xd0200000-0xd03fffff 64bit pref] [ 7.247045] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 7.252393] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 7.258607] pci 0000:00:01.0: bridge window [mem 0xfba00000-0xfbbfffff] [ 7.265514] pci 0000:00:01.0: bridge window [mem pref disabled] [ 7.271728] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 7.277073] pci 0000:00:03.0: bridge window [io disabled] [ 7.282857] pci 0000:00:03.0: bridge window [mem disabled] [ 7.288635] pci 0000:00:03.0: bridge window [mem pref disabled] [ 7.294852] pci 0000:00:05.0: PCI bridge to [bus 04-04] [ 7.300194] pci 0000:00:05.0: bridge window [io disabled] [ 7.305978] pci 0000:00:05.0: bridge window [mem disabled] [ 7.311760] pci 0000:00:05.0: bridge window [mem pref disabled] [ 7.317974] pci 0000:00:07.0: PCI bridge to [bus 05-05] [ 7.323317] pci 0000:00:07.0: bridge window [io disabled] [ 7.329101] pci 0000:00:07.0: bridge window [mem disabled] [ 7.334881] pci 0000:00:07.0: bridge window [mem pref disabled] [ 7.341098] pci 0000:06:00.0: PCI bridge to [bus 07-07] [ 7.346440] pci 0000:06:00.0: bridge window [io disabled] [ 7.352224] pci 0000:06:00.0: bridge window [mem disabled] [ 7.358006] pci 0000:06:00.0: bridge window [mem pref disabled] [ 7.364220] pci 0000:06:00.2: PCI bridge to [bus 08-08] [ 7.369564] pci 0000:06:00.2: bridge window [io 0xd000-0xdfff] [ 7.375780] pci 0000:06:00.2: bridge window [mem 0xfb700000-0xfb9fffff] [ 7.382686] pci 0000:06:00.2: bridge window [mem pref disabled] [ 7.388903] pci 0000:00:09.0: PCI bridge to [bus 06-08] [ 7.394246] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 7.400462] pci 0000:00:09.0: bridge window [mem 0xfb700000-0xfb9fffff] [ 7.407370] pci 0000:00:09.0: bridge window [mem pref disabled] [ 7.413585] pci 0000:00:1c.0: PCI bridge to [bus 09-09] [ 7.418928] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff] [ 7.425146] pci 0000:00:1c.0: bridge window [mem 0xfb400000-0xfb6fffff] [ 7.432061] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref] [ 7.439993] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a] [ 7.445346] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 7.451561] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff] [ 7.458468] pci 0000:00:1c.4: bridge window [mem 0xd0200000-0xd03fffff 64bit pref] [ 7.466400] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] [ 7.471745] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 7.477960] pci 0000:00:1e.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 7.484875] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 7.492825] IOAPIC[3]: Set routing entry (4-4 -> 0x29 -> IRQ 76 Mode:1 Active:1) [ 7.500409] pci 0000:00:01.0: PCI INT A -> GSI 76 (level, low) -> IRQ 76 [ 7.507235] pci 0000:00:01.0: setting latency timer to 64 [ 7.512763] IOAPIC[3]: Set routing entry (4-0 -> 0x41 -> IRQ 72 Mode:1 Active:1) [ 7.521926] pci 0000:00:03.0: PCI INT A -> GSI 72 (level, low) -> IRQ 72 [ 7.528747] pci 0000:00:03.0: setting latency timer to 64 [ 7.534273] IOAPIC[3]: Set routing entry (4-2 -> 0x49 -> IRQ 74 Mode:1 Active:1) [ 7.541859] pci 0000:00:05.0: PCI INT A -> GSI 74 (level, low) -> IRQ 74 [ 7.548679] pci 0000:00:05.0: setting latency timer to 64 [ 7.554204] IOAPIC[3]: Set routing entry (4-6 -> 0x51 -> IRQ 78 Mode:1 Active:1) [ 7.561792] pci 0000:00:07.0: PCI INT A -> GSI 78 (level, low) -> IRQ 78 [ 7.568613] pci 0000:00:07.0: setting latency timer to 64 [ 7.574138] IOAPIC[3]: Set routing entry (4-8 -> 0x59 -> IRQ 80 Mode:1 Active:1) [ 7.581726] pci 0000:00:09.0: PCI INT A -> GSI 80 (level, low) -> IRQ 80 [ 7.588555] pci 0000:00:09.0: setting latency timer to 64 [ 7.594080] pci 0000:06:00.0: setting latency timer to 64 [ 7.599609] pci 0000:06:00.2: setting latency timer to 64 [ 7.605140] IOAPIC[0]: Set routing entry (0-17 -> 0x61 -> IRQ 17 Mode:1 Active:1) [ 7.612814] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.619642] pci 0000:00:1c.0: setting latency timer to 64 [ 7.625166] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.631991] pci 0000:00:1c.4: setting latency timer to 64 [ 7.637517] pci 0000:00:1e.0: setting latency timer to 64 [ 7.643041] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 7.648733] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 7.654427] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 7.660815] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff] [ 7.667201] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 7.672895] pci_bus 0000:01: resource 1 [mem 0xfba00000-0xfbbfffff] [ 7.679282] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff] [ 7.684978] pci_bus 0000:06: resource 1 [mem 0xfb700000-0xfb9fffff] [ 7.691363] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 7.697059] pci_bus 0000:08: resource 1 [mem 0xfb700000-0xfb9fffff] [ 7.703446] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 7.709139] pci_bus 0000:09: resource 1 [mem 0xfb400000-0xfb6fffff] [ 7.715526] pci_bus 0000:09: resource 2 [mem 0xd0000000-0xd01fffff 64bit pref] [ 7.722935] pci_bus 0000:0a: resource 0 [io 0xb000-0xbfff] [ 7.728631] pci_bus 0000:0a: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 7.735017] pci_bus 0000:0a: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref] [ 7.742428] pci_bus 0000:0b: resource 0 [io 0xa000-0xafff] [ 7.748123] pci_bus 0000:0b: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 7.754509] pci_bus 0000:0b: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref] [ 7.761919] pci_bus 0000:0b: resource 4 [io 0x0000-0x0cf7] [ 7.767613] pci_bus 0000:0b: resource 5 [io 0x0d00-0xffff] [ 7.773306] pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff] [ 7.779695] pci_bus 0000:0b: resource 7 [mem 0xc0000000-0xffffffff] [ 7.786421] NET: Registered protocol family 2 [ 7.792162] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 7.803093] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 7.813451] TCP bind hash table entries: 65536 (order: 10, 5242880 bytes) [ 7.823155] TCP: Hash tables configured (established 524288 bind 65536) [ 7.829919] TCP reno registered [ 7.833535] UDP hash table entries: 8192 (order: 8, 1572864 bytes) [ 7.840933] UDP-Lite hash table entries: 8192 (order: 8, 1572864 bytes) [ 7.848889] NET: Registered protocol family 1 [ 7.853829] RPC: Registered udp transport module. [ 7.858658] RPC: Registered tcp transport module. [ 7.863484] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 7.870130] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x003f [ 7.876790] pci 0000:00:1a.0: Performing full reset [ 7.881823] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x003f [ 7.888471] pci 0000:00:1a.2: Performing full reset [ 7.893545] pci 0000:00:1a.7: EHCI: BIOS handoff [ 7.924101] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x103f [ 7.930759] pci 0000:00:1d.0: Performing full reset [ 7.935772] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x003f [ 7.942419] pci 0000:00:1d.1: Performing full reset [ 7.947435] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x003f [ 7.954084] pci 0000:00:1d.2: Performing full reset [ 7.959151] pci 0000:00:1d.7: EHCI: BIOS handoff [ 7.988214] pci 0000:0b:01.0: Boot video device [ 7.992878] PCI: CLS 64 bytes, default 64 [ 7.997130] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 8.003692] Placing 64MB software IO TLB between ffff8800b7800000 - ffff8800bb800000 [ 8.011624] software IO TLB at phys 0xb7800000 - 0xbb800000 [ 8.034208] Machine check injector initialized [ 8.046065] microcode: CPU0 sig=0x206c1, pf=0x1, revision=0x3 [ 8.051942] microcode: CPU1 sig=0x206c1, pf=0x1, revision=0x3 [ 8.057817] microcode: CPU2 sig=0x206c1, pf=0x1, revision=0x3 [ 8.063684] microcode: CPU3 sig=0x206c1, pf=0x1, revision=0x3 [ 8.069552] microcode: CPU4 sig=0x206c1, pf=0x1, revision=0x3 [ 8.075418] microcode: CPU5 sig=0x206c1, pf=0x1, revision=0x3 [ 8.081289] microcode: CPU6 sig=0x206c1, pf=0x1, revision=0x3 [ 8.087173] microcode: CPU7 sig=0x206c1, pf=0x1, revision=0x3 [ 8.093051] microcode: CPU8 sig=0x206c1, pf=0x1, revision=0x3 [ 8.098932] microcode: CPU9 sig=0x206c1, pf=0x1, revision=0x3 [ 8.104811] microcode: CPU10 sig=0x206c1, pf=0x1, revision=0x3 [ 8.110779] microcode: CPU11 sig=0x206c1, pf=0x1, revision=0x3 [ 8.116743] microcode: CPU12 sig=0x206c1, pf=0x1, revision=0x3 [ 8.122704] microcode: CPU13 sig=0x206c1, pf=0x1, revision=0x3 [ 8.128657] microcode: CPU14 sig=0x206c1, pf=0x1, revision=0x3 [ 8.134611] microcode: CPU15 sig=0x206c1, pf=0x1, revision=0x3 [ 8.140565] microcode: CPU16 sig=0x206c1, pf=0x1, revision=0x3 [ 8.146518] microcode: CPU17 sig=0x206c1, pf=0x1, revision=0x3 [ 8.152477] microcode: CPU18 sig=0x206c1, pf=0x1, revision=0x3 [ 8.158446] microcode: CPU19 sig=0x206c1, pf=0x1, revision=0x3 [ 8.164399] microcode: CPU20 sig=0x206c1, pf=0x1, revision=0x3 [ 8.170354] microcode: CPU21 sig=0x206c1, pf=0x1, revision=0x3 [ 8.176307] microcode: CPU22 sig=0x206c1, pf=0x1, revision=0x3 [ 8.182273] microcode: CPU23 sig=0x206c1, pf=0x1, revision=0x3 [ 8.188379] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 8.197359] Scanning for low memory corruption every 60 seconds [ 8.204306] audit: initializing netlink socket (disabled) [ 8.209863] type=2000 audit(1293823599.208:1): initialized [ 8.230007] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 8.240256] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 8.247460] fuse init (API version 7.15) [ 8.251929] JFS: nTxBlock = 8192, nTxLock = 65536 [ 8.261010] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 8.272096] Btrfs loaded [ 8.274744] msgmni has been set to 31955 [ 8.280141] async_tx: api initialized (async) [ 8.284805] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 8.292393] io scheduler noop registered [ 8.296433] io scheduler deadline registered [ 8.300986] io scheduler cfq registered (default) [ 8.307551] pcieport 0000:00:01.0: ACPI _OSC control granted for 0x1c [ 8.314129] pcieport 0000:00:01.0: setting latency timer to 64 [ 8.320135] pcieport 0000:00:01.0: irq 112 for MSI/MSI-X [ 8.327102] pcieport 0000:00:03.0: ACPI _OSC control granted for 0x1c [ 8.333678] pcieport 0000:00:03.0: setting latency timer to 64 [ 8.339673] pcieport 0000:00:03.0: irq 113 for MSI/MSI-X [ 8.346635] pcieport 0000:00:05.0: ACPI _OSC control granted for 0x1c [ 8.353213] pcieport 0000:00:05.0: setting latency timer to 64 [ 8.359209] pcieport 0000:00:05.0: irq 114 for MSI/MSI-X [ 8.366172] pcieport 0000:00:07.0: ACPI _OSC control granted for 0x1c [ 8.372746] pcieport 0000:00:07.0: setting latency timer to 64 [ 8.378742] pcieport 0000:00:07.0: irq 115 for MSI/MSI-X [ 8.385693] pcieport 0000:00:09.0: ACPI _OSC control granted for 0x1c [ 8.392272] pcieport 0000:00:09.0: setting latency timer to 64 [ 8.398268] pcieport 0000:00:09.0: irq 116 for MSI/MSI-X [ 8.405245] pcieport 0000:00:1c.0: ACPI _OSC control granted for 0x1c [ 8.411822] pcieport 0000:00:1c.0: setting latency timer to 64 [ 8.417828] pcieport 0000:00:1c.0: irq 117 for MSI/MSI-X [ 8.424805] pcieport 0000:00:1c.4: ACPI _OSC control granted for 0x1c [ 8.431382] pcieport 0000:00:1c.4: setting latency timer to 64 [ 8.437383] pcieport 0000:00:1c.4: irq 118 for MSI/MSI-X [ 8.443323] aer 0000:00:01.0:pcie02: service driver aer loaded [ 8.449334] aer 0000:00:03.0:pcie02: service driver aer loaded [ 8.455341] aer 0000:00:05.0:pcie02: service driver aer loaded [ 8.461353] aer 0000:00:07.0:pcie02: service driver aer loaded [ 8.467360] aer 0000:00:09.0:pcie02: service driver aer loaded [ 8.473531] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 8.480183] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 8.488562] ACPI: Sleep Button [SLPB] [ 8.492511] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 8.500888] ACPI: Power Button [PWRB] [ 8.504872] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 8.512461] ACPI: Power Button [PWRF] [ 8.517541] ACPI: acpi_idle registered with cpuidle [ 8.523335] Monitor-Mwait will be used to enter C-3 state [ 8.528918] Monitor-Mwait will be used to enter C-3 state [ 8.641436] Initializing Nozomi driver 2.1d (build date: Dec 31 2010 09:03:57) [ 8.649886] Non-volatile memory driver v1.3 [ 8.654696] Linux agpgart interface v0.103 [ 8.659048] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 8.668204] Hangcheck: Using getrawmonotonic(). [ 8.672949] [drm] Initialized drm 1.1.0 20060810 [ 8.677691] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module! [ 8.685376] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 8.712256] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 8.800392] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 9.021018] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 9.108722] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 12.196148] floppy0: no floppy controllers found [ 12.206580] brd: module loaded [ 12.212303] loop: module loaded [ 12.216554] Loading iSCSI transport class v2.0-870. [ 12.222826] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 12.228523] Detecting Adaptec I2O RAID controllers... [ 12.234006] Adaptec aacraid driver 1.1-5[26400]-ms [ 12.239564] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 12.246952] QLogic Fibre Channel HBA Driver: 8.03.05-k0 [ 12.252624] iscsi: registered transport (qla4xxx) [ 12.257592] QLogic iSCSI HBA Driver [ 12.261334] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 12.268979] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 12.276188] megasas: 00.00.04.31-rc1 Mon. May 3, 11:41:51 PST 2010 [ 12.282615] mpt2sas version 06.100.00.00 loaded [ 12.287990] ahci 0000:00:1f.2: version 3.0 [ 12.292230] IOAPIC[0]: Set routing entry (0-19 -> 0xa1 -> IRQ 19 Mode:1 Active:1) [ 12.299904] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 12.306906] ahci 0000:00:1f.2: irq 119 for MSI/MSI-X [ 12.312123] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 12.320487] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ccc ems sxs [ 12.328680] ahci 0000:00:1f.2: setting latency timer to 64 [ 12.374794] scsi0 : ahci [ 12.377972] scsi1 : ahci [ 12.380962] scsi2 : ahci [ 12.383923] scsi3 : ahci [ 12.386908] scsi4 : ahci [ 12.389887] scsi5 : ahci [ 12.393382] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 119 [ 12.401835] ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 119 [ 12.410281] ata3: SATA max UDMA/133 abar m2048@0xfbe21000 port 0xfbe21200 irq 119 [ 12.417952] ata4: SATA max UDMA/133 abar m2048@0xfbe21000 port 0xfbe21280 irq 119 [ 12.425622] ata5: SATA max UDMA/133 abar m2048@0xfbe21000 port 0xfbe21300 irq 119 [ 12.433291] ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 119 [ 12.446114] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 12.453289] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 12.459297] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2 [ 12.465342] e1000e: Copyright (c) 1999 - 2010 Intel Corporation. [ 12.471606] Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2 [ 12.478342] Copyright (c) 2007-2009 Intel Corporation. [ 12.483645] igb 0000:01:00.0: PCI INT A -> GSI 76 (level, low) -> IRQ 76 [ 12.490479] igb 0000:01:00.0: setting latency timer to 64 [ 12.496325] igb 0000:01:00.0: irq 120 for MSI/MSI-X [ 12.501330] igb 0000:01:00.0: irq 121 for MSI/MSI-X [ 12.506330] igb 0000:01:00.0: irq 122 for MSI/MSI-X [ 12.511329] igb 0000:01:00.0: irq 123 for MSI/MSI-X [ 12.516331] igb 0000:01:00.0: irq 124 for MSI/MSI-X [ 12.521331] igb 0000:01:00.0: irq 125 for MSI/MSI-X [ 12.526331] igb 0000:01:00.0: irq 126 for MSI/MSI-X [ 12.531334] igb 0000:01:00.0: irq 127 for MSI/MSI-X [ 12.536335] igb 0000:01:00.0: irq 128 for MSI/MSI-X [ 12.760041] ata5: SATA link down (SStatus 0 SControl 300) [ 12.765602] ata4: SATA link down (SStatus 0 SControl 300) [ 12.769259] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 12.769262] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:30:48:cf:17:26 [ 12.769337] igb 0000:01:00.0: eth0: PBA No: 0010ff-0ff [ 12.769339] igb 0000:01:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 12.769374] IOAPIC[3]: Set routing entry (4-16 -> 0x2a -> IRQ 88 Mode:1 Active:1) [ 12.769379] igb 0000:01:00.1: PCI INT B -> GSI 88 (level, low) -> IRQ 88 [ 12.769392] igb 0000:01:00.1: setting latency timer to 64 [ 12.769715] igb 0000:01:00.1: irq 129 for MSI/MSI-X [ 12.769720] igb 0000:01:00.1: irq 130 for MSI/MSI-X [ 12.769725] igb 0000:01:00.1: irq 131 for MSI/MSI-X [ 12.769730] igb 0000:01:00.1: irq 132 for MSI/MSI-X [ 12.769735] igb 0000:01:00.1: irq 133 for MSI/MSI-X [ 12.769740] igb 0000:01:00.1: irq 134 for MSI/MSI-X [ 12.769745] igb 0000:01:00.1: irq 135 for MSI/MSI-X [ 12.769750] igb 0000:01:00.1: irq 136 for MSI/MSI-X [ 12.769757] igb 0000:01:00.1: irq 137 for MSI/MSI-X [ 12.863310] ata3: SATA link down (SStatus 0 SControl 300) [ 13.061491] igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection [ 13.068490] igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:30:48:cf:17:27 [ 13.075823] igb 0000:01:00.1: eth1: PBA No: 0010ff-0ff [ 13.081077] igb 0000:01:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 13.088936] Intel(R) Virtual Function Network Driver - version 1.0.0-k0 [ 13.095675] Copyright (c) 2009 Intel Corporation. [ 13.100629] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 2.0.84-k2 [ 13.108649] ixgbe: Copyright (c) 1999-2010 Intel Corporation. [ 13.114654] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 13.121908] ixgb: Copyright (c) 1999-2008 Intel Corporation. [ 13.128328] jme: JMicron JMC2XX ethernet driver version 1.0.7 [ 13.134677] ns83820.c: National Semiconductor DP83820 10/100/1000 driver. [ 13.141962] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.6 (Oct 12, 2010) [ 13.149667] sky2: driver version 1.28 [ 13.154868] tun: Universal TUN/TAP device driver, 1.6 [ 13.156051] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 13.156088] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 13.156132] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 13.157204] ata1.00: ATA-8: ST31000528AS, CC35, max UDMA/133 [ 13.157208] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 13.158483] ata1.00: configured for UDMA/133 [ 13.158724] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC35 PQ: 0 ANSI: 5 [ 13.158771] ata6.00: ATAPI: Slimtype DVD A DS8A2S, 6P5D, max UDMA/100 [ 13.159264] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 13.159417] sd 0:0:0:0: [sda] Write Protect is off [ 13.159420] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 13.159483] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.162514] ata6.00: configured for UDMA/100 [ 13.171416] sda: sda1 sda2 [ 13.198779] ata2.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133 [ 13.198782] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 13.257084] ata2.00: configured for UDMA/133 [ 13.257250] scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 13.257723] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 13.257898] sd 1:0:0:0: [sdb] Write Protect is off [ 13.257901] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 13.257975] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.261119] scsi 5:0:0:0: CD-ROM Slimtype DVD A DS8A2S 6P5D PQ: 0 ANSI: 5 [ 13.305935] tun: (C) 1999-2004 Max Krasnyansky [ 13.306475] sd 0:0:0:0: [sda] Attached SCSI disk [ 13.310472] sdb: sdb1 sdb2 sdb3 < sdb5 > [ 13.321741] usbcore: registered new interface driver catc [ 13.321921] sd 1:0:0:0: [sdb] Attached SCSI disk [ 13.331996] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver [ 13.338149] usbcore: registered new interface driver kaweth [ 13.343843] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 13.351620] usbcore: registered new interface driver pegasus [ 13.357398] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver [ 13.364492] usbcore: registered new interface driver rtl8150 [ 13.370375] usbcore: registered new interface driver asix [ 13.375996] usbcore: registered new interface driver cdc_ether [ 13.382050] usbcore: registered new interface driver cdc_eem [ 13.387934] usbcore: registered new interface driver dm9601 [ 13.393735] usbcore: registered new interface driver smsc75xx [ 13.399709] usbcore: registered new interface driver smsc95xx [ 13.405673] usbcore: registered new interface driver gl620a [ 13.411473] usbcore: registered new interface driver net1080 [ 13.417374] usbcore: registered new interface driver plusb [ 13.423080] usbcore: registered new interface driver rndis_host [ 13.429225] usbcore: registered new interface driver cdc_subset [ 13.435368] usbcore: registered new interface driver zaurus [ 13.441166] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 13.448858] usbcore: registered new interface driver int51x1 [ 13.454638] netconsole: local port 6665 [ 13.458597] netconsole: local IP 10.0.0.0 [ 13.462729] netconsole: interface 'eth0' [ 13.466768] netconsole: remote port 6666 [ 13.470807] netconsole: remote IP 192.168.1.11 [ 13.475374] netconsole: remote ethernet address 00:30:48:fe:19:95 [ 13.481590] netconsole: device eth0 not up yet, forcing it [ 15.716631] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 24.209301] console [netcon0] enabled [ 24.213087] netconsole: network logging started [ 24.217932] Fusion MPT base driver 3.04.17 [ 24.222177] Copyright (c) 1999-2008 LSI Corporation [ 24.227221] Fusion MPT SPI Host driver 3.04.17 [ 24.231925] Fusion MPT FC Host driver 3.04.17 [ 24.236544] Fusion MPT SAS Host driver 3.04.17 [ 24.241173] IOAPIC[0]: Set routing entry (0-16 -> 0x8a -> IRQ 16 Mode:1 Active:1) [ 24.248849] mptsas 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 24.256194] mptbase: ioc0: Initiating bringup [ 24.964024] ioc0: LSISAS1068E B2: Capabilities={Initiator} [ 24.969940] mptsas 0000:09:00.0: setting latency timer to 64 [ 35.895440] scsi6 : ioc0: LSISAS1068E B2, FwRev=01120000h, Ports=1, MaxQ=511, IRQ=16 [ 35.933550] mptsas: ioc0: add expander: num_phys 13, sas_addr (0x5000bb52118dc0ff) [ 35.985907] mptsas: ioc0: add expander: num_phys 12, sas_addr (0x5000bb52118dc1ff) [ 36.046372] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 18, phy 0, sas_addr 0x5000c500022d0c6d [ 36.057683] scsi 6:0:0:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 36.091077] sd 6:0:0:0: [sdc] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.098777] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 14, phy 1, sas_addr 0x5000c500022d09b5 [ 36.110076] sd 6:0:0:0: [sdc] Write Protect is off [ 36.115013] sd 6:0:0:0: [sdc] Mode Sense: b3 00 10 08 [ 36.115028] scsi 6:0:1:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 36.149543] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.159039] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 16, phy 2, sas_addr 0x5000c500022d0f35 [ 36.168929] sd 6:0:1:0: [sdd] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.170476] scsi 6:0:2:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 36.214605] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 17, phy 3, sas_addr 0x5000c500022d2a0d [ 36.224510] sd 6:0:2:0: [sde] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.232243] sd 6:0:1:0: [sdd] Write Protect is off [ 36.233902] scsi 6:0:3:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 36.234127] sd 6:0:2:0: [sde] Write Protect is off [ 36.234129] sd 6:0:2:0: [sde] Mode Sense: b3 00 10 08 [ 36.236169] sd 6:0:2:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.258349] sdc: sdc1 sdc2 [ 36.267219] sd 6:0:1:0: [sdd] Mode Sense: b3 00 10 08 [ 36.278053] sd 6:0:3:0: [sdf] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.285795] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 15, phy 4, sas_addr 0x5000c500022d25dd [ 36.305161] sd 6:0:1:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.307683] scsi 6:0:4:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 36.309114] sd 6:0:3:0: [sdf] Write Protect is off [ 36.309117] sd 6:0:3:0: [sdf] Mode Sense: b3 00 10 08 [ 36.329657] sd 6:0:3:0: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.329721] sd 6:0:0:0: [sdc] Attached SCSI disk [ 36.333008] sd 6:0:4:0: [sdg] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.333054] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 19, phy 5, sas_addr 0x5000c500022c3f65 [ 36.352432] sde: sde1 sde2 [ 36.354917] scsi 6:0:5:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 36.355812] sd 6:0:4:0: [sdg] Write Protect is off [ 36.355814] sd 6:0:4:0: [sdg] Mode Sense: b3 00 10 08 [ 36.376775] sd 6:0:4:0: [sdg] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.379951] sd 6:0:5:0: [sdh] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.379973] mptsas: ioc0: attaching stp device: fw_channel 0, fw_id 20, phy 12, sas_addr 0x5000bb52118dc0fc [ 36.399316] sdf: sdf1 sdf2 [ 36.402741] sd 6:0:5:0: [sdh] Write Protect is off [ 36.402744] sd 6:0:5:0: [sdh] Mode Sense: b3 00 10 08 [ 36.404425] sd 6:0:5:0: [sdh] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.497195] sdg: sdg1 sdg2 [ 36.500275] sdh: sdh1 sdh2 [ 36.500325] scsi 6:0:6:0: Enclosure XYRATEX 3GSAS1.0-SATAEXP 1.05 PQ: 0 ANSI: 5 [ 36.556132] sd 6:0:2:0: [sde] Attached SCSI disk [ 36.561015] sdd: sdd1 sdd2 [ 36.563959] sd 6:0:3:0: [sdf] Attached SCSI disk [ 36.564880] sd 6:0:5:0: [sdh] Attached SCSI disk [ 36.564893] sd 6:0:4:0: [sdg] Attached SCSI disk [ 36.604057] sd 6:0:1:0: [sdd] Attached SCSI disk [ 36.720999] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 28, phy 0, sas_addr 0x5000c500022c41a5 [ 36.732309] scsi 6:0:7:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 36.765604] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 29, phy 1, sas_addr 0x5000c500130f4649 [ 36.775548] sd 6:0:7:0: [sdi] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.784647] scsi 6:0:8:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 36.792964] sd 6:0:7:0: [sdi] Write Protect is off [ 36.795694] sd 6:0:8:0: [sdj] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.797163] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 30, phy 2, sas_addr 0x5000c500130fe681 [ 36.798529] sd 6:0:8:0: [sdj] Write Protect is off [ 36.798531] sd 6:0:8:0: [sdj] Mode Sense: b3 00 10 08 [ 36.798679] scsi 6:0:9:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 36.800024] sd 6:0:8:0: [sdj] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.801450] sd 6:0:9:0: [sdk] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.802965] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 31, phy 3, sas_addr 0x5000c500130f4f4d [ 36.804225] sd 6:0:9:0: [sdk] Write Protect is off [ 36.804229] sd 6:0:9:0: [sdk] Mode Sense: b3 00 10 08 [ 36.805667] sd 6:0:9:0: [sdk] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.809859] sdk: sdk1 sdk2 [ 36.816025] sdj: sdj1 sdj2 [ 36.840448] scsi 6:0:10:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 36.842990] sd 6:0:10:0: [sdl] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.844496] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 32, phy 4, sas_addr 0x5000c50013005f59 [ 36.845743] sd 6:0:10:0: [sdl] Write Protect is off [ 36.845745] sd 6:0:10:0: [sdl] Mode Sense: b3 00 10 08 [ 36.845895] scsi 6:0:11:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 36.847166] sd 6:0:10:0: [sdl] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.848437] sd 6:0:11:0: [sdm] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.849940] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 33, phy 5, sas_addr 0x5000c500130e21cd [ 36.851196] sd 6:0:11:0: [sdm] Write Protect is off [ 36.851198] sd 6:0:11:0: [sdm] Mode Sense: b3 00 10 08 [ 36.851346] scsi 6:0:12:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 36.852962] sd 6:0:11:0: [sdm] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.854102] sd 6:0:12:0: [sdn] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.855655] Fusion MPT misc device (ioctl) driver 3.04.17 [ 36.855801] mptctl: Registered with Fusion MPT base driver [ 36.855803] mptctl: /dev/mptctl @ (major,minor=10,220) [ 36.855977] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 36.855978] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 36.856068] IOAPIC[0]: Set routing entry (0-18 -> 0x92 -> IRQ 18 Mode:1 Active:1) [ 36.856074] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 36.856121] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 36.856125] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 36.856236] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file 'devices' [ 36.856253] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 36.856268] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 36.856822] sd 6:0:12:0: [sdn] Write Protect is off [ 36.856826] sd 6:0:12:0: [sdn] Mode Sense: b3 00 10 08 [ 36.858134] sdm: sdm1 sdm2 [ 36.858306] sd 6:0:12:0: [sdn] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.858712] sdl: sdl1 sdl2 [ 36.862589] sdn: sdn1 sdn2 [ 37.099015] sd 6:0:7:0: [sdi] Mode Sense: b3 00 10 08 [ 37.103387] sd 6:0:10:0: [sdl] Attached SCSI disk [ 37.103675] sd 6:0:9:0: [sdk] Attached SCSI disk [ 37.103687] sd 6:0:8:0: [sdj] Attached SCSI disk [ 37.120143] sd 6:0:7:0: [sdi] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 37.153542] sd 6:0:12:0: [sdn] Attached SCSI disk [ 37.158410] sd 6:0:11:0: [sdm] Attached SCSI disk [ 37.164041] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 37.164465] sdi: sdi1 sdi2 [ 37.176110] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 37.185747] ehci_hcd 0000:00:1a.7: debug port 1 [ 37.190405] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 37.201882] sd 6:0:7:0: [sdi] Attached SCSI disk [ 37.203422] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 37.203424] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 37.203460] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbe23000 [ 37.203464] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 37.207350] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 37.216027] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 37.216132] usb usb1: default language 0x0409 [ 37.216152] usb usb1: udev 1, busnum 1, minor = 0 [ 37.216153] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 37.216155] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 37.216156] usb usb1: Product: EHCI Host Controller [ 37.216158] usb usb1: Manufacturer: Linux 2.6.37-rc8-dt5+ ehci_hcd [ 37.216159] usb usb1: SerialNumber: 0000:00:1a.7 [ 37.216353] usb usb1: usb_probe_device [ 37.216356] usb usb1: configuration #1 chosen from 1 choice [ 37.216408] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 37.216556] hub 1-0:1.0: usb_probe_interface [ 37.216558] hub 1-0:1.0: usb_probe_interface - got id [ 37.216559] hub 1-0:1.0: USB hub found [ 37.216570] hub 1-0:1.0: 6 ports detected [ 37.216571] hub 1-0:1.0: standalone hub [ 37.216572] hub 1-0:1.0: no power switching (usb 1.0) [ 37.216574] hub 1-0:1.0: individual port over-current protection [ 37.216575] hub 1-0:1.0: power on to power good time: 20ms [ 37.216600] hub 1-0:1.0: local power source is good [ 37.216602] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 37.216674] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 37.216842] IOAPIC[0]: Set routing entry (0-23 -> 0x9a -> IRQ 23 Mode:1 Active:1) [ 37.216846] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 37.216877] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 37.216880] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 37.216887] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '002' [ 37.216898] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 37.316088] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 37.436028] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 37.445184] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 37.454800] ehci_hcd 0000:00:1d.7: debug port 1 [ 37.459458] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 37.472488] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 37.479397] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 37.485302] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbe22000 [ 37.491082] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 37.504099] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 37.524030] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 37.529965] usb usb2: default language 0x0409 [ 37.534478] usb usb2: udev 1, busnum 2, minor = 128 [ 37.539476] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 37.546383] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 37.553791] usb usb2: Product: EHCI Host Controller [ 37.558792] usb usb2: Manufacturer: Linux 2.6.37-rc8-dt5+ ehci_hcd [ 37.565095] usb usb2: SerialNumber: 0000:00:1d.7 [ 37.570029] usb usb2: usb_probe_device [ 37.573910] usb usb2: configuration #1 chosen from 1 choice [ 37.579615] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 37.585621] hub 2-0:1.0: usb_probe_interface [ 37.590020] hub 2-0:1.0: usb_probe_interface - got id [ 37.595192] hub 2-0:1.0: USB hub found [ 37.599074] hub 2-0:1.0: 6 ports detected [ 37.603210] hub 2-0:1.0: standalone hub [ 37.607169] hub 2-0:1.0: no power switching (usb 1.0) [ 37.612343] hub 2-0:1.0: individual port over-current protection [ 37.618470] hub 2-0:1.0: power on to power good time: 20ms [ 37.624089] hub 2-0:1.0: local power source is good [ 37.629088] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 37.636148] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 37.644090] uhci_hcd: USB Universal Host Controller Interface driver [ 37.650685] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 37.657959] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 37.663910] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 37.669268] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '003' [ 37.676943] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 37.708027] uhci_hcd 0000:00:1a.0: detected 2 ports [ 37.713034] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 37.719853] uhci_hcd 0000:00:1a.0: Performing full reset [ 37.725301] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 37.731183] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0c0 [ 37.737067] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 37.746050] hub 2-0:1.0: port 1: status 0501 change 0001 [ 37.746231] usb usb3: default language 0x0409 [ 37.746266] usb usb3: udev 1, busnum 3, minor = 256 [ 37.746267] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 37.746269] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 37.746271] usb usb3: Product: UHCI Host Controller [ 37.746273] usb usb3: Manufacturer: Linux 2.6.37-rc8-dt5+ uhci_hcd [ 37.746274] usb usb3: SerialNumber: 0000:00:1a.0 [ 37.746491] usb usb3: usb_probe_device [ 37.746493] usb usb3: configuration #1 chosen from 1 choice [ 37.746516] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 37.746657] hub 3-0:1.0: usb_probe_interface [ 37.746659] hub 3-0:1.0: usb_probe_interface - got id [ 37.746662] hub 3-0:1.0: USB hub found [ 37.746675] hub 3-0:1.0: 2 ports detected [ 37.746677] hub 3-0:1.0: standalone hub [ 37.746678] hub 3-0:1.0: no power switching (usb 1.0) [ 37.746680] hub 3-0:1.0: individual port over-current protection [ 37.746681] hub 3-0:1.0: power on to power good time: 2ms [ 37.746694] hub 3-0:1.0: local power source is good [ 37.746697] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 37.746748] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 37.746868] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0 [ 37.746939] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 37.746956] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 37.746961] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 37.746971] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '004' [ 37.746981] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4 [ 37.848053] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 37.936033] uhci_hcd 0000:00:1a.2: detected 2 ports [ 37.941047] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 37.947871] uhci_hcd 0000:00:1a.2: Performing full reset [ 37.953317] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 37.959226] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000f0a0 [ 37.965155] usb usb4: default language 0x0409 [ 37.969653] usb usb4: udev 1, busnum 4, minor = 384 [ 37.974652] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 37.981560] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 37.988969] usb usb4: Product: UHCI Host Controller [ 37.993970] usb usb4: Manufacturer: Linux 2.6.37-rc8-dt5+ uhci_hcd [ 38.000270] usb usb4: SerialNumber: 0000:00:1a.2 [ 38.005211] usb usb4: usb_probe_device [ 38.008051] hub 2-0:1.0: state 7 ports 6 chg 0002 evt 0000 [ 38.008074] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 38.021081] usb usb4: configuration #1 chosen from 1 choice [ 38.026785] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 38.032797] hub 4-0:1.0: usb_probe_interface [ 38.037191] hub 4-0:1.0: usb_probe_interface - got id [ 38.042365] hub 4-0:1.0: USB hub found [ 38.046247] hub 4-0:1.0: 2 ports detected [ 38.050381] hub 4-0:1.0: standalone hub [ 38.054342] hub 4-0:1.0: no power switching (usb 1.0) [ 38.059517] hub 4-0:1.0: individual port over-current protection [ 38.064247] ehci_hcd 0000:00:1d.7: port 1 full speed --> companion [ 38.064251] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 38.064257] hub 2-0:1.0: port 1 not reset yet, waiting 50ms [ 38.086757] hub 4-0:1.0: power on to power good time: 2ms [ 38.092288] hub 4-0:1.0: local power source is good [ 38.097293] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 38.104331] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 38.112106] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2 [ 38.118288] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 38.120033] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 38.120079] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0002 [ 38.140117] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 38.146070] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 38.151424] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '005' [ 38.159101] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 38.180030] uhci_hcd 0000:00:1d.0: detected 2 ports [ 38.185038] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 38.191865] uhci_hcd 0000:00:1d.0: Performing full reset [ 38.197312] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 38.203194] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080 [ 38.209096] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 38.209150] usb usb5: default language 0x0409 [ 38.209170] usb usb5: udev 1, busnum 5, minor = 512 [ 38.209171] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 38.209173] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 38.209174] usb usb5: Product: UHCI Host Controller [ 38.209175] usb usb5: Manufacturer: Linux 2.6.37-rc8-dt5+ uhci_hcd [ 38.209177] usb usb5: SerialNumber: 0000:00:1d.0 [ 38.209351] usb usb5: usb_probe_device [ 38.209353] usb usb5: configuration #1 chosen from 1 choice [ 38.209364] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 38.209461] hub 5-0:1.0: usb_probe_interface [ 38.209462] hub 5-0:1.0: usb_probe_interface - got id [ 38.209463] hub 5-0:1.0: USB hub found [ 38.209473] hub 5-0:1.0: 2 ports detected [ 38.209474] hub 5-0:1.0: standalone hub [ 38.209475] hub 5-0:1.0: no power switching (usb 1.0) [ 38.209477] hub 5-0:1.0: individual port over-current protection [ 38.209478] hub 5-0:1.0: power on to power good time: 2ms [ 38.209488] hub 5-0:1.0: local power source is good [ 38.209490] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 38.209536] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 38.209643] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 [ 38.209686] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 38.209697] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 38.209700] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 38.209709] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '006' [ 38.209716] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 38.308034] uhci_hcd 0000:00:1d.0: port 1 portsc 009b,00 [ 38.308042] hub 5-0:1.0: port 1: status 0101 change 0003 [ 38.404024] uhci_hcd 0000:00:1d.1: detected 2 ports [ 38.409038] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 38.415860] uhci_hcd 0000:00:1d.1: Performing full reset [ 38.421306] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 38.427193] hub 5-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 38.427203] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060 [ 38.427300] usb usb6: default language 0x0409 [ 38.427327] usb usb6: udev 1, busnum 6, minor = 640 [ 38.427330] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 38.427333] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 38.427337] usb usb6: Product: UHCI Host Controller [ 38.427339] usb usb6: Manufacturer: Linux 2.6.37-rc8-dt5+ uhci_hcd [ 38.427342] usb usb6: SerialNumber: 0000:00:1d.1 [ 38.427552] usb usb6: usb_probe_device [ 38.427555] usb usb6: configuration #1 chosen from 1 choice [ 38.427572] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 38.427726] hub 6-0:1.0: usb_probe_interface [ 38.427727] hub 6-0:1.0: usb_probe_interface - got id [ 38.427730] hub 6-0:1.0: USB hub found [ 38.427744] hub 6-0:1.0: 2 ports detected [ 38.427746] hub 6-0:1.0: standalone hub [ 38.427747] hub 6-0:1.0: no power switching (usb 1.0) [ 38.427749] hub 6-0:1.0: individual port over-current protection [ 38.427752] hub 6-0:1.0: power on to power good time: 2ms [ 38.427768] hub 6-0:1.0: local power source is good [ 38.427770] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 38.427835] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 38.428027] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 [ 38.428081] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 38.428093] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 38.428096] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 38.428104] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '007' [ 38.428111] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 38.591703] hub 5-0:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 38.620029] uhci_hcd 0000:00:1d.2: detected 2 ports [ 38.625043] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 38.631866] uhci_hcd 0000:00:1d.2: Performing full reset [ 38.637314] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 38.643188] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040 [ 38.649113] usb usb7: default language 0x0409 [ 38.653615] usb usb7: udev 1, busnum 7, minor = 768 [ 38.658613] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 38.665520] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 38.672930] usb usb7: Product: UHCI Host Controller [ 38.677930] usb usb7: Manufacturer: Linux 2.6.37-rc8-dt5+ uhci_hcd [ 38.684232] usb usb7: SerialNumber: 0000:00:1d.2 [ 38.689173] usb usb7: usb_probe_device [ 38.693047] usb usb7: configuration #1 chosen from 1 choice [ 38.698751] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 38.704750] hub 7-0:1.0: usb_probe_interface [ 38.708036] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 38.716221] hub 7-0:1.0: usb_probe_interface - got id [ 38.721395] hub 7-0:1.0: USB hub found [ 38.725279] hub 7-0:1.0: 2 ports detected [ 38.729412] hub 7-0:1.0: standalone hub [ 38.733373] hub 7-0:1.0: no power switching (usb 1.0) [ 38.738550] hub 7-0:1.0: individual port over-current protection [ 38.744683] hub 7-0:1.0: power on to power good time: 2ms [ 38.750215] hub 7-0:1.0: local power source is good [ 38.755216] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 38.762259] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 38.770043] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 [ 38.776324] Initializing USB Mass Storage driver... [ 38.781459] usbcore: registered new interface driver usb-storage [ 38.787590] USB Mass Storage support registered. [ 38.792491] usbcore: registered new interface driver libusual [ 38.798487] usbcore: registered new interface driver ums-alauda [ 38.804639] usbcore: registered new interface driver ums-cypress [ 38.812459] usbcore: registered new interface driver ums-datafab [ 38.818693] usbcore: registered new interface driver ums-freecom [ 38.824937] usbcore: registered new interface driver ums-isd200 [ 38.831083] usbcore: registered new interface driver ums-jumpshot [ 38.837399] usbcore: registered new interface driver ums-karma [ 38.840037] usb 5-1: ep0 maxpacket = 8 [ 38.840038] usb usb3: suspend_rh (auto-stop) [ 38.851730] usbcore: registered new interface driver ums-onetouch [ 38.857148] usb 5-1: udev 2, busnum 5, minor = 513 [ 38.857150] usb 5-1: New USB device found, idVendor=0557, idProduct=8021 [ 38.857152] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 38.857333] usb 5-1: usb_probe_device [ 38.857335] usb 5-1: configuration #1 chosen from 1 choice [ 38.860148] usb 5-1: adding 5-1:1.0 (config #1, interface 0) [ 38.860266] hub 5-1:1.0: usb_probe_interface [ 38.860267] hub 5-1:1.0: usb_probe_interface - got id [ 38.860269] hub 5-1:1.0: USB hub found [ 38.862152] hub 5-1:1.0: 4 ports detected [ 38.862153] hub 5-1:1.0: standalone hub [ 38.862154] hub 5-1:1.0: individual port power switching [ 38.862155] hub 5-1:1.0: individual port over-current protection [ 38.862157] hub 5-1:1.0: power on to power good time: 100ms [ 38.864151] hub 5-1:1.0: local power source is good [ 38.864152] hub 5-1:1.0: enabling power on all ports [ 38.868177] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '002' [ 38.868212] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 38.954158] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 38.954289] usbcore: registered new interface driver ums-sddr09 [ 38.954403] usbcore: registered new interface driver ums-sddr55 [ 38.954507] usbcore: registered new interface driver ums-usbat [ 38.954720] usbcore: registered new interface driver usbserial [ 38.954826] USB Serial support registered for generic [ 38.954954] usbcore: registered new interface driver usbserial_generic [ 38.954955] usbserial: USB Serial Driver core [ 38.955055] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter [ 38.955167] usbcore: registered new interface driver belkin [ 38.955168] belkin_sa: v1.3:USB Belkin Serial converter driver [ 38.955263] USB Serial support registered for MCT U232 [ 38.955372] usbcore: registered new interface driver mct_u232 [ 38.955373] mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver [ 39.040160] hub 5-1:1.0: port 1: status 0301 change 0001 [ 39.048270] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 39.058510] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 39.063616] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 39.069244] mice: PS/2 mouse device common for all mice [ 39.075769] rtc_cmos 00:08: RTC can wake from S4 [ 39.120278] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 39.126533] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 39.133465] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 39.139501] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0460) [ 39.146778] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 39.152917] iTCO_vendor_support: vendor-support=0 [ 39.157764] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 128, phase 0, 12 us [ 39.165797] SoftDog: cannot register miscdev on minor=130 (err=-16) [ 39.165803] hub 5-1:1.0: state 7 ports 4 chg 0002 evt 0000 [ 39.177814] hub 5-1:1.0: port 1, status 0301, change 0000, 1.5 Mb/s [ 39.177828] md: linear personality registered for level -1 [ 39.177830] md: raid0 personality registered for level 0 [ 39.177832] md: raid1 personality registered for level 1 [ 39.177835] md: raid10 personality registered for level 10 [ 39.177837] md: raid6 personality registered for level 6 [ 39.177839] md: raid5 personality registered for level 5 [ 39.177841] md: raid4 personality registered for level 4 [ 39.177843] md: multipath personality registered for level -4 [ 39.177844] md: faulty personality registered for level -5 [ 39.234252] device-mapper: uevent: version 1.0.3 [ 39.239400] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com [ 39.248696] device-mapper: multipath: version 1.1.1 loaded [ 39.254340] device-mapper: multipath round-robin: version 1.0.0 loaded [ 39.261001] device-mapper: multipath queue-length: version 0.1.0 loaded [ 39.267751] device-mapper: multipath service-time: version 0.2.0 loaded [ 39.274890] device-mapper: dm-log-userspace: version 1.0.0 loaded [ 39.291203] cpuidle: using governor ladder [ 39.309145] usb 5-1.1: new low speed USB device using uhci_hcd and address 3 [ 39.322325] cpuidle: using governor menu [ 39.326386] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 39.332540] ioatdma 0000:00:16.0: can't derive routing for PCI INT A [ 39.336063] usb usb4: suspend_rh (auto-stop) [ 39.343423] ioatdma 0000:00:16.0: PCI INT A: no GSI [ 39.348579] ioatdma 0000:00:16.0: setting latency timer to 64 [ 39.354649] ioatdma 0000:00:16.0: irq 138 for MSI/MSI-X [ 39.361162] igb 0000:01:00.0: DCA enabled [ 39.365461] igb 0000:01:00.1: DCA enabled [ 39.369647] ioatdma 0000:00:16.1: can't derive routing for PCI INT B [ 39.376167] ioatdma 0000:00:16.1: PCI INT B: no GSI [ 39.381318] ioatdma 0000:00:16.1: setting latency timer to 64 [ 39.387377] ioatdma 0000:00:16.1: irq 139 for MSI/MSI-X [ 39.393627] ioatdma 0000:00:16.2: can't derive routing for PCI INT C [ 39.400112] ioatdma 0000:00:16.2: PCI INT C: no GSI [ 39.405257] ioatdma 0000:00:16.2: setting latency timer to 64 [ 39.411328] ioatdma 0000:00:16.2: irq 140 for MSI/MSI-X [ 39.417579] ioatdma 0000:00:16.3: can't derive routing for PCI INT D [ 39.424072] ioatdma 0000:00:16.3: PCI INT D: no GSI [ 39.429219] ioatdma 0000:00:16.3: setting latency timer to 64 [ 39.435277] ioatdma 0000:00:16.3: irq 141 for MSI/MSI-X [ 39.441467] ioatdma 0000:00:16.4: can't derive routing for PCI INT A [ 39.447959] ioatdma 0000:00:16.4: PCI INT A: no GSI [ 39.453076] ioatdma 0000:00:16.4: setting latency timer to 64 [ 39.459136] ioatdma 0000:00:16.4: irq 142 for MSI/MSI-X [ 39.465349] ioatdma 0000:00:16.5: can't derive routing for PCI INT B [ 39.471836] ioatdma 0000:00:16.5: PCI INT B: no GSI [ 39.476731] usb 5-1.1: skipped 1 descriptor after interface [ 39.476734] usb 5-1.1: skipped 1 descriptor after interface [ 39.476736] usb 5-1.1: skipped 1 descriptor after interface [ 39.494145] ioatdma 0000:00:16.5: setting latency timer to 64 [ 39.500134] usb 5-1.1: default language 0x0409 [ 39.500223] ioatdma 0000:00:16.5: irq 143 for MSI/MSI-X [ 39.501041] ioatdma 0000:00:16.6: can't derive routing for PCI INT C [ 39.501042] ioatdma 0000:00:16.6: PCI INT C: no GSI [ 39.501077] ioatdma 0000:00:16.6: setting latency timer to 64 [ 39.501226] ioatdma 0000:00:16.6: irq 144 for MSI/MSI-X [ 39.502022] ioatdma 0000:00:16.7: can't derive routing for PCI INT D [ 39.502024] ioatdma 0000:00:16.7: PCI INT D: no GSI [ 39.502059] ioatdma 0000:00:16.7: setting latency timer to 64 [ 39.502203] ioatdma 0000:00:16.7: irq 145 for MSI/MSI-X [ 39.503558] usbcore: registered new interface driver usbhid [ 39.503559] usbhid: USB HID core driver [ 39.504217] dell-wmi: No known WMI GUID found [ 39.504219] acer-wmi: Acer Laptop ACPI-WMI Extras [ 39.504223] acer-wmi: No or unsupported WMI interface, unable to load [ 39.504865] ALSA device list: [ 39.504867] No soundcards found. [ 39.505062] oprofile: using NMI interrupt. [ 39.584044] usb usb6: suspend_rh (auto-stop) [ 39.596172] netem: version 1.2 [ 39.599342] Netfilter messages via NETLINK v0.30. [ 39.604268] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 39.613057] ctnetlink v0.93: registering with nfnetlink. [ 39.618602] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 39.625756] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 39.631778] usb 5-1.1: udev 3, busnum 5, minor = 514 [ 39.636880] usb 5-1.1: New USB device found, idVendor=0557, idProduct=2261 [ 39.636895] xt_time: kernel timezone is -0000 [ 39.638585] ip_tables: (C) 2000-2006 Netfilter Core Team [ 39.638743] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [ 39.638794] arp_tables: (C) 2002 David S. Miller [ 39.638860] TCP bic registered [ 39.638861] TCP cubic registered [ 39.638863] TCP westwood registered [ 39.638864] TCP highspeed registered [ 39.638865] TCP hybla registered [ 39.638866] TCP htcp registered [ 39.638868] TCP vegas registered [ 39.638869] TCP veno registered [ 39.638870] TCP scalable registered [ 39.638871] TCP lp registered [ 39.638872] TCP yeah registered [ 39.638873] TCP illinois registered [ 39.638875] Initializing XFRM netlink socket [ 39.638891] NET: Registered protocol family 17 [ 39.638904] NET: Registered protocol family 15 [ 39.719053] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 39.719138] Bridge firewalling registered [ 39.719152] Ebtables v2.0 registered [ 39.734420] usb 5-1.1: Product: CS1716A V1.0.098 [ 39.739160] usb 5-1.1: Manufacturer: ATEN International Co. Ltd [ 39.741486] PM: Hibernation image not present or could not be loaded. [ 39.741514] registered taskstats version 1 [ 39.742503] Magic number: 6:757:446 [ 39.759745] rtc_cmos 00:08: setting system clock to 2010-12-31 19:27:13 UTC (1293823633) [ 39.760170] usb 5-1.1: usb_probe_device [ 39.760173] usb 5-1.1: configuration #1 chosen from 1 choice [ 39.777887] usb 5-1.1: adding 5-1.1:1.0 (config #1, interface 0) [ 39.784318] usbserial_generic 5-1.1:1.0: usb_probe_interface [ 39.790154] usbserial_generic 5-1.1:1.0: usb_probe_interface - got id [ 39.796814] usbhid 5-1.1:1.0: usb_probe_interface [ 39.801684] usbhid 5-1.1:1.0: usb_probe_interface - got id [ 39.832038] usb usb7: suspend_rh (auto-stop) [ 39.860476] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input3 [ 39.873023] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 8, phase 4, 118 us [ 39.882895] generic-usb 0003:0557:2261.0001: input: USB HID v1.00 Keyboard [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-1.1/input0 [ 39.896732] usb 5-1.1: adding 5-1.1:1.1 (config #1, interface 1) [ 39.903173] usbserial_generic 5-1.1:1.1: usb_probe_interface [ 39.908977] usbserial_generic 5-1.1:1.1: usb_probe_interface - got id [ 39.915618] usbhid 5-1.1:1.1: usb_probe_interface [ 39.920497] usbhid 5-1.1:1.1: usb_probe_interface - got id [ 39.956634] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.1/input/input4 [ 39.969178] uhci_hcd 0000:00:1d.0: reserve dev 3 ep82-INT, period 8, phase 4, 118 us [ 39.977566] generic-usb 0003:0557:2261.0002: input: USB HID v1.00 Device [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-1.1/input1 [ 39.991244] usb 5-1.1: adding 5-1.1:1.2 (config #1, interface 2) [ 39.997790] usbserial_generic 5-1.1:1.2: usb_probe_interface [ 40.003585] usbserial_generic 5-1.1:1.2: usb_probe_interface - got id [ 40.010185] usbhid 5-1.1:1.2: usb_probe_interface [ 40.015013] usbhid 5-1.1:1.2: usb_probe_interface - got id [ 40.041732] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.2/input/input5 [ 40.055074] generic-usb 0003:0557:2261.0003: input: USB HID v1.10 Mouse [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-1.1/input2 [ 40.068671] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '003' [ 40.076394] hub 5-1:1.0: state 7 ports 4 chg 0000 evt 0002 [ 41.284182] IP-Config: Complete: [ 41.287293] device=eth0, addr=192.168.1.69, mask=255.255.255.0, gw=192.168.1.1, [ 41.295491] host=lkp-ws02, domain=, nis-domain=(none), [ 41.301316] bootserver=192.168.1.11, rootserver=192.168.1.11, rootpath= [ 41.309428] md: Waiting for all devices to be available before autodetect [ 41.316362] md: If you don't use raid, use raid=noautodetect [ 41.323257] md: Autodetecting RAID arrays. [ 41.327528] md: Scanned 0 and added 0 devices. [ 41.332143] md: autorun ... [ 41.335062] md: ... autorun DONE. [ 41.350819] VFS: Mounted root (nfs filesystem) on device 0:15. [ 41.356835] debug: unmapping init memory ffffffff81fd9000..ffffffff82298000 [ 41.493376] stty used greatest stack depth: 3184 bytes left [ 41.825111] create_static_n used greatest stack depth: 3120 bytes left [ 42.314753] hdparm used greatest stack depth: 2848 bytes left [ 42.923920] sshd (3232): /proc/3232/oom_adj is deprecated, please use /proc/3232/oom_score_adj instead. [ 44.421481] EXT4-fs (sda1): recovery complete [ 44.426229] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)