[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.37-rc8-dt5+ (wfg@bee) (gcc version 4.5.0 (GCC) ) #395 SMP Fri Dec 31 09:08:10 CST 2010 [ 0.000000] Command line: run=/home/wfg/ioless-balance_dirty_pages/test-each-fs.sh debug sched_debug apic=debug panic=10 hung_task_panic=1 softlockup_panic=1 unknown_nmi_panic=1 nmi_watchdog=panic,lapic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 netconsole=@:/eth0,6666@192.168.1.11/00:30:48:fe:19:95 ip=192.168.1.69:192.168.1.11:192.168.1.1:255.255.255.0:lkp-ws02:eth0:none nfsroot=192.168.1.11:/nfsroot/wfg,tcp,v3,rsize=524288,wsize=524288 rw BOOT_IMAGE=x86_64/vmlinuz [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable) [ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf30b000 (usable) [ 0.000000] BIOS-e820: 00000000bf30b000 - 00000000bf38b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf38b000 - 00000000bf3a1000 (reserved) [ 0.000000] BIOS-e820: 00000000bf3a1000 - 00000000bf3a2000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf3a2000 - 00000000bf3b3000 (reserved) [ 0.000000] BIOS-e820: 00000000bf3b3000 - 00000000bf3b6000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf3b6000 - 00000000bf3dd000 (reserved) [ 0.000000] BIOS-e820: 00000000bf3dd000 - 00000000bf3de000 (usable) [ 0.000000] BIOS-e820: 00000000bf3de000 - 00000000bf3df000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf3df000 - 00000000bf414000 (reserved) [ 0.000000] BIOS-e820: 00000000bf414000 - 00000000bf416000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf416000 - 00000000bf418000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf418000 - 00000000bf420000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf420000 - 00000000bf421000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf421000 - 00000000bf423000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf423000 - 00000000bf42b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf42b000 - 00000000bf454000 (reserved) [ 0.000000] BIOS-e820: 00000000bf454000 - 00000000bf657000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf657000 - 00000000bf800000 (usable) [ 0.000000] BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000440000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: X8DTN/X8DTN, BIOS 4.6.3 01/06/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x440000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FC00000000 write-back [ 0.000000] 1 base 0400000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFC0000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes. [ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes. [ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [ffff8800000fcf20] fcf20 [ 0.000000] mpc: fc9f0-fcea4 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000 [ 0.000000] 0000000000 - 00bf800000 page 4k [ 0.000000] kernel direct mapping tables up to bf800000 @ 1fa00000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000440000000 [ 0.000000] 0100000000 - 0440000000 page 4k [ 0.000000] kernel direct mapping tables up to 440000000 @ bd0f9000-bf30b000 [ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 A M I) [ 0.000000] ACPI: XSDT 00000000bf421e18 0008C (v01 A M I ALASKA 01072009 MSFT 00010013) [ 0.000000] ACPI: FACP 00000000bf41fd98 000F4 (v04 A M I ALASKA 01072009 MSFT 00010013) [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20101013/tbfadt-369) [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBF420F40/0x00000000BF420E40, using 32 (20101013/tbfadt-486) [ 0.000000] ACPI: DSDT 00000000bf418018 06059 (v01 A M I ALASKA 00000001 INTL 20051117) [ 0.000000] ACPI: FACS 00000000bf420f40 00040 [ 0.000000] ACPI: APIC 00000000bf41fc18 00130 (v02 A M I ALASKA 01072009 MSFT 00010013) [ 0.000000] ACPI: SSDT 00000000bf415798 006EE (v01 AMICPU PROC 00000001 MSFT 03000001) [ 0.000000] ACPI: MCFG 00000000bf422f18 0003C (v01 A M I OEMMCFG 01072009 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000bf414c98 00228 (v01 A M I AMI SRAT 00000001 AMI. 00000000) [ 0.000000] ACPI: SLIT 00000000bf422e98 00030 (v01 A M I AMI SLIT 00000000 AMI. 00000000) [ 0.000000] ACPI: HPET 00000000bf422e18 00038 (v01 A M I ICH7HPET 01072009 AMI. 00000003) [ 0.000000] ACPI: SPMI 00000000bf422d98 00040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.000000] ACPI: EINJ 00000000bf41fa98 00130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.000000] ACPI: ERST 00000000bf414a18 00210 (v01 AMIER AMI ERST 00000000 00000000) [ 0.000000] ACPI: HEST 00000000bf414f18 000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.000000] ACPI: BERT 00000000bf422d18 00030 (v01 AMI AMI BERT 00000000 00000000) [ 0.000000] ACPI: DMAR 00000000bf415f18 000D4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x12 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x13 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x14 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x15 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x20 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x21 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x22 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x23 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x24 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x25 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x30 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x31 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x32 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x33 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x34 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x35 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 0-c0000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-240000000 [ 0.000000] SRAT: Node 1 PXM 1 240000000-440000000 [ 0.000000] SRAT: Node 0 [0,c0000000) + [100000000,240000000) -> [0,240000000) [ 0.000000] NUMA: Using 30 for the hash shift. [ 0.000000] Initmem setup node 0 0000000000000000-0000000240000000 [ 0.000000] NODE_DATA [000000023fffb000 - 000000023fffffff] [ 0.000000] Initmem setup node 1 0000000240000000-0000000440000000 [ 0.000000] NODE_DATA [000000043fffa000 - 000000043fffefff] [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237e00000-ffff88023edfffff] on node 0 [ 0.000000] [ffffea0007e00000-ffffea000edfffff] PMD -> [ffff880437e00000-ffff88043edfffff] on node 1 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00440000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009c [ 0.000000] 0: 0x00000100 -> 0x000bf30b [ 0.000000] 0: 0x000bf3dd -> 0x000bf3de [ 0.000000] 0: 0x000bf657 -> 0x000bf800 [ 0.000000] 0: 0x00100000 -> 0x00240000 [ 0.000000] 1: 0x00240000 -> 0x00440000 [ 0.000000] On node 0 totalpages: 2094145 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3918 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 765165 pages, LIFO batch:31 [ 0.000000] Normal zone: 17920 pages used for memmap [ 0.000000] Normal zone: 1292800 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 2097152 [ 0.000000] Normal zone: 28672 pages used for memmap [ 0.000000] Normal zone: 2068480 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x20] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x22] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x24] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x30] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x32] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x34] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x21] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x23] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x31] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x33] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x35] enabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec02000] gsi_base[48]) [ 0.000000] IOAPIC[2]: apic_id 3, version 32, address 0xfec02000, GSI 48-71 [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec90000] gsi_base[72]) [ 0.000000] IOAPIC[3]: apic_id 4, version 32, address 0xfec90000, GSI 72-95 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 24 CPUs, 0 hotplug CPUs [ 0.000000] mapped APIC to ffffffffff5fc000 (fee00000) [ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000) [ 0.000000] mapped IOAPIC to ffffffffff5fa000 (fec01000) [ 0.000000] mapped IOAPIC to ffffffffff5f9000 (fec02000) [ 0.000000] mapped IOAPIC to ffffffffff5f8000 (fec90000) [ 0.000000] nr_irqs_gsi: 112 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf30b000 - 00000000bf38b000 [ 0.000000] PM: Registered nosave memory: 00000000bf38b000 - 00000000bf3a1000 [ 0.000000] PM: Registered nosave memory: 00000000bf3a1000 - 00000000bf3a2000 [ 0.000000] PM: Registered nosave memory: 00000000bf3a2000 - 00000000bf3b3000 [ 0.000000] PM: Registered nosave memory: 00000000bf3b3000 - 00000000bf3b6000 [ 0.000000] PM: Registered nosave memory: 00000000bf3b6000 - 00000000bf3dd000 [ 0.000000] PM: Registered nosave memory: 00000000bf3de000 - 00000000bf3df000 [ 0.000000] PM: Registered nosave memory: 00000000bf3df000 - 00000000bf414000 [ 0.000000] PM: Registered nosave memory: 00000000bf414000 - 00000000bf416000 [ 0.000000] PM: Registered nosave memory: 00000000bf416000 - 00000000bf418000 [ 0.000000] PM: Registered nosave memory: 00000000bf418000 - 00000000bf420000 [ 0.000000] PM: Registered nosave memory: 00000000bf420000 - 00000000bf421000 [ 0.000000] PM: Registered nosave memory: 00000000bf421000 - 00000000bf423000 [ 0.000000] PM: Registered nosave memory: 00000000bf423000 - 00000000bf42b000 [ 0.000000] PM: Registered nosave memory: 00000000bf42b000 - 00000000bf454000 [ 0.000000] PM: Registered nosave memory: 00000000bf454000 - 00000000bf657000 [ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ed1c000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:24 nr_node_ids:2 [ 0.000000] PERCPU: Embedded 475 pages/cpu @ffff8800bb800000 s1916096 r8192 d21312 u2097152 [ 0.000000] pcpu-alloc: s1916096 r8192 d21312 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 12 [0] 13 [ 0.000000] pcpu-alloc: [0] 14 [0] 15 [0] 16 [0] 17 [1] 06 [1] 07 [1] 08 [1] 09 [ 0.000000] pcpu-alloc: [1] 10 [1] 11 [1] 18 [1] 19 [1] 20 [1] 21 [1] 22 [1] 23 [ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 4130363 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: run=/home/wfg/ioless-balance_dirty_pages/test-each-fs.sh debug sched_debug apic=debug panic=10 hung_task_panic=1 softlockup_panic=1 unknown_nmi_panic=1 nmi_watchdog=panic,lapic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 netconsole=@:/eth0,6666@192.168.1.11/00:30:48:fe:19:95 ip=192.168.1.69:192.168.1.11:192.168.1.1:255.255.255.0:lkp-ws02:eth0:none nfsroot=192.168.1.11:/nfsroot/wfg,tcp,v3,rsize=524288,wsize=524288 rw BOOT_IMAGE=x86_64/vmlinuz [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 16361144k/17825792k available (10752k kernel code, 1060604k absent, 404044k reserved, 5468k data, 2812k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:2096 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 6335 kB [ 0.000000] per task-struct memory footprint: 2688 bytes [ 0.000000] allocated 167772160 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] ODEBUG: 31 of 31 active objects replaced [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 2800.074 MHz processor. [ 0.000015] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.14 BogoMIPS (lpj=11200296) [ 0.010959] pid_max: default: 32768 minimum: 301 [ 0.019924] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.032807] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.041776] Mount-cache hash table entries: 256 [ 0.046920] Initializing cgroup subsys debug [ 0.051307] Initializing cgroup subsys ns [ 0.055430] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.064477] Initializing cgroup subsys cpuacct [ 0.069045] Initializing cgroup subsys memory [ 0.073562] Initializing cgroup subsys devices [ 0.078120] Initializing cgroup subsys freezer [ 0.082677] Initializing cgroup subsys blkio [ 0.087168] CPU: Physical Processor ID: 0 [ 0.091294] CPU: Processor Core ID: 0 [ 0.095076] mce: CPU supports 9 MCE banks [ 0.099209] CPU0: Thermal monitoring enabled (TM1) [ 0.104127] using mwait in idle threads. [ 0.108169] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver. [ 0.115774] ... version: 3 [ 0.119898] ... bit width: 48 [ 0.124110] ... generic registers: 4 [ 0.128237] ... value mask: 0000ffffffffffff [ 0.133659] ... max period: 000000007fffffff [ 0.139083] ... fixed-purpose events: 3 [ 0.143209] ... event mask: 000000070000000f [ 0.149726] ACPI: Core revision 20101013 [ 0.175843] ftrace: allocating 33698 entries in 133 pages [ 0.190696] Getting VERSION: 1060015 [ 0.194394] Getting VERSION: 1060015 [ 0.198086] Getting ID: 0 [ 0.200828] Getting ID: 0 [ 0.203562] Setting APIC routing to physical flat [ 0.208381] enabled ExtINT on CPU#0 [ 0.212424] ESR value before enabling vector: 0x00000040 after: 0x00000000 [ 0.219496] ENABLING IO-APIC IRQs [ 0.222928] init IO_APIC IRQs [ 0.226016] 0-0 (apicid-pin) not connected [ 0.230394] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 0.237883] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) [ 0.245371] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) [ 0.252858] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) [ 0.260340] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) [ 0.267822] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) [ 0.275304] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) [ 0.282790] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 0.290278] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0) [ 0.297759] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) [ 0.305416] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) [ 0.313069] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 0.320725] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 0.328381] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) [ 0.336036] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) [ 0.343690] 0-16 0-17 0-18 0-19 0-20 0-21 0-22 0-23 2-0 2-1 2-2 2-3 2-4 2-5 2-6 2-7 2-8 2-9 2-10 2-11 2-12 2-13 2-14 2-15 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 3-0 3-1 3-2 3-3 3-4 3-5 3-6 3-7 3-8 3-9 3-10 3-11 3-12 3-13 3-14 3-15 3-16 3-17 3-18 3-19 3-20 3-21 3-22 3-23 4-0 4-1 4-2 4-3 4-4 4-5 4-6 4-7 4-8 4-9 4-10 4-11 4-12 4-13 4-14 4-15 4-16 4-17 4-18 4-19 4-20 4-21 4-22 4-23 (apicid-pin) not connected [ 0.385398] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.431118] CPU0: Intel(R) Xeon(R) CPU X5660 @ 2.80GHz stepping 01 [ 0.438495] Using local APIC timer interrupts. [ 0.438496] calibrating APIC timer ... [ 0.551694] ... lapic delta = 833352 [ 0.555375] ... PM-Timer delta = 357950 [ 0.559321] ... PM-Timer result ok [ 0.562832] ..... delta 833352 [ 0.565997] ..... mult: 35789958 [ 0.569337] ..... calibration result: 533345 [ 0.573714] ..... CPU clock speed is 2800.0254 MHz. [ 0.578696] ..... host bus clock speed is 133.1345 MHz. [ 0.584703] lockdep: fixing up alternatives. [ 0.589186] Booting Node 0, Processors #1masked ExtINT on CPU#1 [ 0.704275] lockdep: fixing up alternatives. [ 0.708761] #2masked ExtINT on CPU#2 [ 0.820050] lockdep: fixing up alternatives. [ 0.824467] #3masked ExtINT on CPU#3 [ 0.935856] lockdep: fixing up alternatives. [ 0.940279] #4masked ExtINT on CPU#4 [ 1.051567] lockdep: fixing up alternatives. [ 1.055984] #5masked ExtINT on CPU#5 [ 1.167638] lockdep: fixing up alternatives. [ 1.172064] Ok. [ 1.174017] Booting Node 1, Processors #6masked ExtINT on CPU#6 [ 1.290777] TSC synchronization [CPU#0 -> CPU#6]: [ 1.295654] Measured 891 cycles TSC warp between CPUs, turning off TSC clock. [ 0.012000] Marking TSC unstable due to check_tsc_sync_source failed [ 0.980646] lockdep: fixing up alternatives. [ 0.984035] #7masked ExtINT on CPU#7 [ 1.080751] lockdep: fixing up alternatives. [ 1.084033] #8masked ExtINT on CPU#8 [ 1.176717] lockdep: fixing up alternatives. [ 1.180036] #9masked ExtINT on CPU#9 [ 1.272685] lockdep: fixing up alternatives. [ 1.276036] #10masked ExtINT on CPU#10 [ 1.372664] lockdep: fixing up alternatives. [ 1.376035] #11masked ExtINT on CPU#11 [ 1.472491] lockdep: fixing up alternatives. [ 1.476034] Ok. [ 1.477986] Booting Node 0, Processors #12masked ExtINT on CPU#12 [ 1.576446] lockdep: fixing up alternatives. [ 1.580039] #13masked ExtINT on CPU#13 [ 1.672435] lockdep: fixing up alternatives. [ 1.676035] #14masked ExtINT on CPU#14 [ 1.768235] lockdep: fixing up alternatives. [ 1.772036] #15masked ExtINT on CPU#15 [ 1.864383] lockdep: fixing up alternatives. [ 1.868039] #16masked ExtINT on CPU#16 [ 1.960405] lockdep: fixing up alternatives. [ 1.964035] #17masked ExtINT on CPU#17 [ 2.056565] lockdep: fixing up alternatives. [ 2.060039] Ok. [ 2.061986] Booting Node 1, Processors #18masked ExtINT on CPU#18 [ 2.160595] lockdep: fixing up alternatives. [ 2.164032] #19masked ExtINT on CPU#19 [ 2.260576] lockdep: fixing up alternatives. [ 2.264028] #20masked ExtINT on CPU#20 [ 2.356596] lockdep: fixing up alternatives. [ 2.360033] #21masked ExtINT on CPU#21 [ 2.452613] lockdep: fixing up alternatives. [ 2.456032] #22masked ExtINT on CPU#22 [ 2.548513] lockdep: fixing up alternatives. [ 2.552029] #23 Ok. [ 0.012000] masked ExtINT on CPU#23 [ 2.648074] Brought up 24 CPUs [ 2.651238] Total of 24 processors activated (134405.14 BogoMIPS). [ 2.652072] Testing NMI watchdog ... OK. [ 2.740282] CPU0 attaching sched-domain: [ 2.744004] domain 0: span 0,12 level SIBLING [ 2.748002] groups: 0 (cpu_power = 589) 12 (cpu_power = 589) [ 2.754258] domain 1: span 0-5,12-17 level MC [ 2.760002] groups: 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) [ 2.774578] domain 2: span 0-23 level NODE [ 2.780002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 2.788307] CPU1 attaching sched-domain: [ 2.792012] domain 0: span 1,13 level SIBLING [ 2.796002] groups: 1 (cpu_power = 589) 13 (cpu_power = 589) [ 2.802256] domain 1: span 0-5,12-17 level MC [ 2.808002] groups: 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) [ 2.824002] domain 2: span 0-23 level NODE [ 2.828002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 2.836303] CPU2 attaching sched-domain: [ 2.840002] domain 0: span 2,14 level SIBLING [ 2.844002] groups: 2 (cpu_power = 589) 14 (cpu_power = 589) [ 2.850258] domain 1: span 0-5,12-17 level MC [ 2.856002] groups: 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) [ 2.872301] domain 2: span 0-23 level NODE [ 2.876002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 2.884304] CPU3 attaching sched-domain: [ 2.888002] domain 0: span 3,15 level SIBLING [ 2.892002] groups: 3 (cpu_power = 589) 15 (cpu_power = 589) [ 2.899874] domain 1: span 0-5,12-17 level MC [ 2.904002] groups: 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) [ 2.920301] domain 2: span 0-23 level NODE [ 2.924002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 2.932304] CPU4 attaching sched-domain: [ 2.936002] domain 0: span 4,16 level SIBLING [ 2.940002] groups: 4 (cpu_power = 589) 16 (cpu_power = 589) [ 2.948002] domain 1: span 0-5,12-17 level MC [ 2.952002] groups: 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) [ 2.968301] domain 2: span 0-23 level NODE [ 2.972002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 2.980303] CPU5 attaching sched-domain: [ 2.984002] domain 0: span 5,17 level SIBLING [ 2.988002] groups: 5 (cpu_power = 589) 17 (cpu_power = 589) [ 2.996301] domain 1: span 0-5,12-17 level MC [ 3.000002] groups: 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) [ 3.016302] domain 2: span 0-23 level NODE [ 3.020002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.028303] CPU6 attaching sched-domain: [ 3.032002] domain 0: span 6,18 level SIBLING [ 3.036002] groups: 6 (cpu_power = 589) 18 (cpu_power = 589) [ 3.044302] domain 1: span 6-11,18-23 level MC [ 3.048002] groups: 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) [ 3.064301] domain 2: span 0-23 level NODE [ 3.068002] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.076304] CPU7 attaching sched-domain: [ 3.080002] domain 0: span 7,19 level SIBLING [ 3.086301] groups: 7 (cpu_power = 589) 19 (cpu_power = 589) [ 3.092303] domain 1: span 6-11,18-23 level MC [ 3.096002] groups: 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) [ 3.112303] domain 2: span 0-23 level NODE [ 3.118039] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.126087] CPU8 attaching sched-domain: [ 3.128002] domain 0: span 8,20 level SIBLING [ 3.134301] groups: 8 (cpu_power = 589) 20 (cpu_power = 589) [ 3.140301] domain 1: span 6-11,18-23 level MC [ 3.144002] groups: 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) [ 3.162084] domain 2: span 0-23 level NODE [ 3.166039] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.175013] CPU9 attaching sched-domain: [ 3.176002] domain 0: span 9,21 level SIBLING [ 3.182298] groups: 9 (cpu_power = 589) 21 (cpu_power = 589) [ 3.189927] domain 1: span 6-11,18-23 level MC [ 3.194386] groups: 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) [ 3.210578] domain 2: span 0-23 level NODE [ 3.214039] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.223014] CPU10 attaching sched-domain: [ 3.224002] domain 0: span 10,22 level SIBLING [ 3.232002] groups: 10 (cpu_power = 589) 22 (cpu_power = 589) [ 3.238257] domain 1: span 6-11,18-23 level MC [ 3.242387] groups: 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) [ 3.258578] domain 2: span 0-23 level NODE [ 3.264002] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.272005] CPU11 attaching sched-domain: [ 3.276002] domain 0: span 11,23 level SIBLING [ 3.280002] groups: 11 (cpu_power = 589) 23 (cpu_power = 589) [ 3.286257] domain 1: span 6-11,18-23 level MC [ 3.292002] groups: 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) [ 3.308301] domain 2: span 0-23 level NODE [ 3.312002] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.320306] CPU12 attaching sched-domain: [ 3.324002] domain 0: span 0,12 level SIBLING [ 3.328002] groups: 12 (cpu_power = 589) 0 (cpu_power = 589) [ 3.336002] domain 1: span 0-5,12-17 level MC [ 3.340002] groups: 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) [ 3.356301] domain 2: span 0-23 level NODE [ 3.360002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.368303] CPU13 attaching sched-domain: [ 3.372002] domain 0: span 1,13 level SIBLING [ 3.376002] groups: 13 (cpu_power = 589) 1 (cpu_power = 589) [ 3.384301] domain 1: span 0-5,12-17 level MC [ 3.388002] groups: 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) [ 3.404303] domain 2: span 0-23 level NODE [ 3.408002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.416304] CPU14 attaching sched-domain: [ 3.420002] domain 0: span 2,14 level SIBLING [ 3.426300] groups: 14 (cpu_power = 589) 2 (cpu_power = 589) [ 3.432304] domain 1: span 0-5,12-17 level MC [ 3.436002] groups: 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) [ 3.452301] domain 2: span 0-23 level NODE [ 3.456002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.464303] CPU15 attaching sched-domain: [ 3.468002] domain 0: span 3,15 level SIBLING [ 3.474299] groups: 15 (cpu_power = 589) 3 (cpu_power = 589) [ 3.480303] domain 1: span 0-5,12-17 level MC [ 3.484002] groups: 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) [ 3.500304] domain 2: span 0-23 level NODE [ 3.506039] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.514087] CPU16 attaching sched-domain: [ 3.516002] domain 0: span 4,16 level SIBLING [ 3.522301] groups: 16 (cpu_power = 589) 4 (cpu_power = 589) [ 3.528301] domain 1: span 0-5,12-17 level MC [ 3.532002] groups: 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) [ 3.548301] domain 2: span 0-23 level NODE [ 3.554032] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.562086] CPU17 attaching sched-domain: [ 3.564002] domain 0: span 5,17 level SIBLING [ 3.570299] groups: 17 (cpu_power = 589) 5 (cpu_power = 589) [ 3.576303] domain 1: span 0-5,12-17 level MC [ 3.580002] groups: 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) [ 3.598082] domain 2: span 0-23 level NODE [ 3.602040] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.610080] CPU18 attaching sched-domain: [ 3.612002] domain 0: span 6,18 level SIBLING [ 3.616002] groups: 18 (cpu_power = 589) 6 (cpu_power = 589) [ 3.622171] domain 1: span 6-11,18-23 level MC [ 3.628002] groups: 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) [ 3.644302] domain 2: span 0-23 level NODE [ 3.648002] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.656304] CPU19 attaching sched-domain: [ 3.660002] domain 0: span 7,19 level SIBLING [ 3.664001] groups: 19 (cpu_power = 589) 7 (cpu_power = 589) [ 3.671788] domain 1: span 6-11,18-23 level MC [ 3.676001] groups: 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) [ 3.692301] domain 2: span 0-23 level NODE [ 3.696001] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.704304] CPU20 attaching sched-domain: [ 3.708002] domain 0: span 8,20 level SIBLING [ 3.712001] groups: 20 (cpu_power = 589) 8 (cpu_power = 589) [ 3.720301] domain 1: span 6-11,18-23 level MC [ 3.724001] groups: 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) [ 3.740301] domain 2: span 0-23 level NODE [ 3.744002] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.752304] CPU21 attaching sched-domain: [ 3.756002] domain 0: span 9,21 level SIBLING [ 3.762299] groups: 21 (cpu_power = 589) 9 (cpu_power = 589) [ 3.768301] domain 1: span 6-11,18-23 level MC [ 3.772002] groups: 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) [ 3.788301] domain 2: span 0-23 level NODE [ 3.794040] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.802085] CPU22 attaching sched-domain: [ 3.804002] domain 0: span 10,22 level SIBLING [ 3.810386] groups: 22 (cpu_power = 589) 10 (cpu_power = 589) [ 3.816301] domain 1: span 6-11,18-23 level MC [ 3.822386] groups: 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) [ 3.838575] domain 2: span 0-23 level NODE [ 3.842040] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.851014] CPU23 attaching sched-domain: [ 3.852002] domain 0: span 11,23 level SIBLING [ 3.860002] groups: 23 (cpu_power = 589) 11 (cpu_power = 589) [ 3.866255] domain 1: span 6-11,18-23 level MC [ 3.870387] groups: 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) [ 3.886663] domain 2: span 0-23 level NODE [ 3.892002] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.900774] kworker/u:0 used greatest stack depth: 6080 bytes left [ 3.907586] kworker/u:0 used greatest stack depth: 5400 bytes left [ 3.924337] xor: automatically using best checksumming function: generic_sse [ 3.948003] generic_sse: 10590.000 MB/sec [ 3.952002] xor: using function: generic_sse (10590.000 MB/sec) [ 3.956089] Time: 10:28:41 Date: 12/31/10 [ 3.960323] NET: Registered protocol family 16 [ 3.968119] ACPI: bus type pci registered [ 3.972142] dca service started, version 1.12.1 [ 3.976081] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) [ 3.980006] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820 [ 4.067820] PCI: Using configuration type 1 for base access [ 4.102769] bio: create slab at 0 [ 4.176017] raid6: int64x1 2305 MB/s [ 4.244022] raid6: int64x2 2895 MB/s [ 4.312016] raid6: int64x4 2270 MB/s [ 4.380030] raid6: int64x8 2254 MB/s [ 4.448011] raid6: sse2x1 6868 MB/s [ 4.516010] raid6: sse2x2 8044 MB/s [ 4.584002] raid6: sse2x4 8872 MB/s [ 4.587861] raid6: using algorithm sse2x4 (8872 MB/s) [ 4.594670] ACPI: EC: Look up EC in DSDT [ 4.600527] \_SB_:_OSC evaluation returned wrong type [ 4.604004] _OSC request data:1 6 [ 4.614605] ACPI: Executed 1 blocks of module-level executable AML code [ 4.704334] ACPI: SSDT 00000000bf416018 01494 (v01 AMI IST 00000001 MSFT 03000001) [ 4.712894] ACPI: Dynamic OEM Table Load: [ 4.716299] ACPI: SSDT (null) 01494 (v01 AMI IST 00000001 MSFT 03000001) [ 4.737354] ACPI: Interpreter enabled [ 4.740006] ACPI: (supports S0 S4 S5) [ 4.745094] ACPI: Using IOAPIC for interrupt routing [ 4.752268] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 4.760200] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 4.769530] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 4.778220] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 4.786133] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 4.812298] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 4.824586] ACPI: No dock devices found. [ 4.828004] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 4.832630] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 4.836328] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 4.840004] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 4.844005] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 4.848003] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff] [ 4.852030] pci 0000:00:00.0: [8086:3406] type 0 class 0x000600 [ 4.856074] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 4.860007] pci 0000:00:00.0: PME# disabled [ 4.864030] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604 [ 4.868066] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 4.872004] pci 0000:00:01.0: PME# disabled [ 4.876036] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604 [ 4.880067] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 4.884005] pci 0000:00:03.0: PME# disabled [ 4.888032] pci 0000:00:05.0: [8086:340c] type 1 class 0x000604 [ 4.892067] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 4.896007] pci 0000:00:05.0: PME# disabled [ 4.900029] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604 [ 4.904066] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 4.908004] pci 0000:00:07.0: PME# disabled [ 4.912029] pci 0000:00:09.0: [8086:3410] type 1 class 0x000604 [ 4.916066] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 4.920004] pci 0000:00:09.0: PME# disabled [ 4.924039] pci 0000:00:13.0: [8086:342d] type 0 class 0x000800 [ 4.928016] pci 0000:00:13.0: reg 10: [mem 0xfbe24000-0xfbe24fff] [ 4.932064] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 4.936004] pci 0000:00:13.0: PME# disabled [ 4.940025] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800 [ 4.944089] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800 [ 4.948090] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800 [ 4.952084] pci 0000:00:14.3: [8086:3438] type 0 class 0x000800 [ 4.956087] pci 0000:00:16.0: [8086:3430] type 0 class 0x000880 [ 4.960018] pci 0000:00:16.0: reg 10: [mem 0xfbe1c000-0xfbe1ffff 64bit] [ 4.964087] pci 0000:00:16.1: [8086:3431] type 0 class 0x000880 [ 4.968018] pci 0000:00:16.1: reg 10: [mem 0xfbe18000-0xfbe1bfff 64bit] [ 4.972087] pci 0000:00:16.2: [8086:3432] type 0 class 0x000880 [ 4.980018] pci 0000:00:16.2: reg 10: [mem 0xfbe14000-0xfbe17fff 64bit] [ 4.984090] pci 0000:00:16.3: [8086:3433] type 0 class 0x000880 [ 4.988018] pci 0000:00:16.3: reg 10: [mem 0xfbe10000-0xfbe13fff 64bit] [ 4.992090] pci 0000:00:16.4: [8086:3429] type 0 class 0x000880 [ 4.996018] pci 0000:00:16.4: reg 10: [mem 0xfbe0c000-0xfbe0ffff 64bit] [ 5.000087] pci 0000:00:16.5: [8086:342a] type 0 class 0x000880 [ 5.004017] pci 0000:00:16.5: reg 10: [mem 0xfbe08000-0xfbe0bfff 64bit] [ 5.008087] pci 0000:00:16.6: [8086:342b] type 0 class 0x000880 [ 5.012018] pci 0000:00:16.6: reg 10: [mem 0xfbe04000-0xfbe07fff 64bit] [ 5.016090] pci 0000:00:16.7: [8086:342c] type 0 class 0x000880 [ 5.020018] pci 0000:00:16.7: reg 10: [mem 0xfbe00000-0xfbe03fff 64bit] [ 5.024094] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03 [ 5.028058] pci 0000:00:1a.0: reg 20: [io 0xf0c0-0xf0df] [ 5.032061] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03 [ 5.036058] pci 0000:00:1a.2: reg 20: [io 0xf0a0-0xf0bf] [ 5.040075] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03 [ 5.044027] pci 0000:00:1a.7: reg 10: [mem 0xfbe23000-0xfbe233ff] [ 5.048096] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 5.052006] pci 0000:00:1a.7: PME# disabled [ 5.056028] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604 [ 5.060077] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 5.064005] pci 0000:00:1c.0: PME# disabled [ 5.068031] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604 [ 5.072077] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 5.076005] pci 0000:00:1c.4: PME# disabled [ 5.080035] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03 [ 5.084058] pci 0000:00:1d.0: reg 20: [io 0xf080-0xf09f] [ 5.088060] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03 [ 5.092058] pci 0000:00:1d.1: reg 20: [io 0xf060-0xf07f] [ 5.096062] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03 [ 5.100058] pci 0000:00:1d.2: reg 20: [io 0xf040-0xf05f] [ 5.104073] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03 [ 5.108029] pci 0000:00:1d.7: reg 10: [mem 0xfbe22000-0xfbe223ff] [ 5.112097] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 5.116005] pci 0000:00:1d.7: PME# disabled [ 5.120028] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 5.124077] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601 [ 5.128098] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO [ 5.132004] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO [ 5.136004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0600 (mask 00ff) [ 5.140004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f) [ 5.144004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 001f) [ 5.148004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0ca0 (mask 000f) [ 5.152053] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106 [ 5.156026] pci 0000:00:1f.2: reg 10: [io 0xf110-0xf117] [ 5.160011] pci 0000:00:1f.2: reg 14: [io 0xf100-0xf103] [ 5.164011] pci 0000:00:1f.2: reg 18: [io 0xf0f0-0xf0f7] [ 5.168011] pci 0000:00:1f.2: reg 1c: [io 0xf0e0-0xf0e3] [ 5.172011] pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f] [ 5.176011] pci 0000:00:1f.2: reg 24: [mem 0xfbe21000-0xfbe217ff] [ 5.180048] pci 0000:00:1f.2: PME# supported from D3hot [ 5.184005] pci 0000:00:1f.2: PME# disabled [ 5.188023] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05 [ 5.192020] pci 0000:00:1f.3: reg 10: [mem 0xfbe20000-0xfbe200ff 64bit] [ 5.196029] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f] [ 5.200107] pci 0000:01:00.0: [8086:10c9] type 0 class 0x000200 [ 5.204016] pci 0000:01:00.0: reg 10: [mem 0xfbaa0000-0xfbabffff] [ 5.208012] pci 0000:01:00.0: reg 14: [mem 0xfba80000-0xfba9ffff] [ 5.212012] pci 0000:01:00.0: reg 18: [io 0xe020-0xe03f] [ 5.216012] pci 0000:01:00.0: reg 1c: [mem 0xfbb44000-0xfbb47fff] [ 5.220032] pci 0000:01:00.0: reg 30: [mem 0xfba60000-0xfba7ffff pref] [ 5.224039] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 5.228005] pci 0000:01:00.0: PME# disabled [ 5.232050] pci 0000:01:00.1: [8086:10c9] type 0 class 0x000200 [ 5.236017] pci 0000:01:00.1: reg 10: [mem 0xfba40000-0xfba5ffff] [ 5.240012] pci 0000:01:00.1: reg 14: [mem 0xfba20000-0xfba3ffff] [ 5.244012] pci 0000:01:00.1: reg 18: [io 0xe000-0xe01f] [ 5.248012] pci 0000:01:00.1: reg 1c: [mem 0xfbb40000-0xfbb43fff] [ 5.252032] pci 0000:01:00.1: reg 30: [mem 0xfba00000-0xfba1ffff pref] [ 5.256039] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 5.260005] pci 0000:01:00.1: PME# disabled [ 5.264021] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 5.268005] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 5.272005] pci 0000:00:01.0: bridge window [mem 0xfba00000-0xfbbfffff] [ 5.276007] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.280053] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 5.284005] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled) [ 5.288005] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 5.292007] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.296052] pci 0000:00:05.0: PCI bridge to [bus 04-04] [ 5.300005] pci 0000:00:05.0: bridge window [io 0xf000-0x0000] (disabled) [ 5.304004] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 5.308007] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.312053] pci 0000:00:07.0: PCI bridge to [bus 05-05] [ 5.316005] pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled) [ 5.320004] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 5.324007] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.328061] pci 0000:06:00.0: [8086:0329] type 1 class 0x000604 [ 5.332023] pci 0000:06:00.0: PXH quirk detected; SHPC device MSI disabled [ 5.336065] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 5.340004] pci 0000:06:00.0: PME# disabled [ 5.344030] pci 0000:06:00.2: [8086:032a] type 1 class 0x000604 [ 5.348023] pci 0000:06:00.2: PXH quirk detected; SHPC device MSI disabled [ 5.352065] pci 0000:06:00.2: PME# supported from D0 D3hot D3cold [ 5.356004] pci 0000:06:00.2: PME# disabled [ 5.360021] pci 0000:00:09.0: PCI bridge to [bus 06-08] [ 5.364005] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 5.368004] pci 0000:00:09.0: bridge window [mem 0xfb700000-0xfb9fffff] [ 5.372007] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.376090] pci 0000:06:00.0: PCI bridge to [bus 07-07] [ 5.380005] pci 0000:06:00.0: bridge window [io 0xf000-0x0000] (disabled) [ 5.384005] pci 0000:06:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 5.388007] pci 0000:06:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.392060] pci 0000:08:01.0: [8086:1229] type 0 class 0x000200 [ 5.396021] pci 0000:08:01.0: reg 10: [mem 0xfb900000-0xfb900fff] [ 5.400013] pci 0000:08:01.0: reg 14: [io 0xd000-0xd03f] [ 5.404013] pci 0000:08:01.0: reg 18: [mem 0xfb800000-0xfb8fffff] [ 5.408043] pci 0000:08:01.0: reg 30: [mem 0xfb700000-0xfb7fffff pref] [ 5.412024] pci 0000:08:01.0: supports D1 D2 [ 5.416002] pci 0000:08:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 5.420015] pci 0000:08:01.0: PME# disabled [ 5.424060] pci 0000:06:00.2: PCI bridge to [bus 08-08] [ 5.428006] pci 0000:06:00.2: bridge window [io 0xd000-0xdfff] [ 5.432005] pci 0000:06:00.2: bridge window [mem 0xfb700000-0xfb9fffff] [ 5.436008] pci 0000:06:00.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.440086] pci 0000:09:00.0: [1000:0058] type 0 class 0x000100 [ 5.444019] pci 0000:09:00.0: reg 10: [io 0xc000-0xc0ff] [ 5.448020] pci 0000:09:00.0: reg 14: [mem 0xfb610000-0xfb613fff 64bit] [ 5.452020] pci 0000:09:00.0: reg 1c: [mem 0xfb600000-0xfb60ffff 64bit] [ 5.456025] pci 0000:09:00.0: reg 30: [mem 0xfb400000-0xfb5fffff pref] [ 5.460039] pci 0000:09:00.0: supports D1 D2 [ 5.464021] pci 0000:00:1c.0: PCI bridge to [bus 09-09] [ 5.468005] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff] [ 5.472005] pci 0000:00:1c.0: bridge window [mem 0xfb400000-0xfb6fffff] [ 5.476008] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.480075] pci 0000:0a:00.0: [197b:2368] type 0 class 0x000101 [ 5.484036] pci 0000:0a:00.0: reg 10: [io 0xb040-0xb047] [ 5.488017] pci 0000:0a:00.0: reg 14: [io 0xb030-0xb033] [ 5.492017] pci 0000:0a:00.0: reg 18: [io 0xb020-0xb027] [ 5.496017] pci 0000:0a:00.0: reg 1c: [io 0xb010-0xb013] [ 5.500017] pci 0000:0a:00.0: reg 20: [io 0xb000-0xb00f] [ 5.504032] pci 0000:0a:00.0: reg 30: [mem 0xfbd00000-0xfbd0ffff pref] [ 5.508065] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a] [ 5.512005] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 5.516005] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff] [ 5.520007] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.528026] pci 0000:0b:01.0: [1002:515e] type 0 class 0x000300 [ 5.532023] pci 0000:0b:01.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] [ 5.536013] pci 0000:0b:01.0: reg 14: [io 0xa000-0xa0ff] [ 5.540013] pci 0000:0b:01.0: reg 18: [mem 0xfbc20000-0xfbc2ffff] [ 5.544045] pci 0000:0b:01.0: reg 30: [mem 0xfbc00000-0xfbc1ffff pref] [ 5.548025] pci 0000:0b:01.0: supports D1 D2 [ 5.552063] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] (subtractive decode) [ 5.556005] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 5.560005] pci 0000:00:1e.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 5.564008] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 5.568004] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 5.572003] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 5.576004] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 5.580003] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) [ 5.584046] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 5.592980] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 5.596299] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 5.600171] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 5.604240] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT] [ 5.608150] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9.PXHA._PRT] [ 5.612226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9.PXHB._PRT] [ 5.681235] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 5.687247] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 5.691234] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 5.695236] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 5.703001] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 5.711241] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 5.719237] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 5.727236] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15) [ 5.734975] vgaarb: device added: PCI:0000:0b:01.0,decodes=io+mem,owns=io+mem,locks=none [ 5.736006] vgaarb: loaded [ 5.740469] SCSI subsystem initialized [ 5.744084] libata version 3.00 loaded. [ 5.748108] usbcore: registered new interface driver usbfs [ 5.752098] usbcore: registered new interface driver hub [ 5.756097] usbcore: registered new device driver usb [ 5.760478] wmi: Mapper loaded [ 5.764079] Advanced Linux Sound Architecture Driver Version 1.0.23. [ 5.768003] PCI: Using ACPI for IRQ routing [ 5.772003] PCI: pci_cache_line_size set to 64 bytes [ 5.776290] reserve RAM buffer: 000000000009c400 - 000000000009ffff [ 5.780006] reserve RAM buffer: 00000000bf30b000 - 00000000bfffffff [ 5.784018] reserve RAM buffer: 00000000bf3de000 - 00000000bfffffff [ 5.788013] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff [ 5.792198] [ 5.792198] printing PIC contents [ 5.796006] ... PIC IMR: ffff [ 5.799167] ... PIC IRR: 0c20 [ 5.800004] ... PIC ISR: 0000 [ 5.804004] ... PIC ELCR: 0c20 [ 5.808002] printing local APIC contents on CPU#0/0: [ 5.812000] ... APIC ID: 00000000 (0) [ 5.812000] ... APIC VERSION: 01060015 [ 5.812000] ... APIC TASKPRI: 00000000 (00) [ 5.812000] ... APIC PROCPRI: 00000000 [ 5.812000] ... APIC LDR: 01000000 [ 5.812000] ... APIC DFR: ffffffff [ 5.812000] ... APIC SPIV: 000001ff [ 5.812000] ... APIC ISR field: [ 5.812000] 0000000000000000000000000000000000000000000000000000000000000000 [ 5.812000] ... APIC TMR field: [ 5.812000] 0000000000000000000000000000000000000000000000000000000000000000 [ 5.812000] ... APIC IRR field: [ 5.812000] 0000000000000000000000000000000000000000000000000000000000008000 [ 5.812000] ... APIC ESR: 00000000 [ 5.812000] ... APIC ICR: 000000fc [ 5.812000] ... APIC ICR2: 35000000 [ 5.812000] ... APIC LVTT: 000200ef [ 5.812000] ... APIC LVTPC: 00000400 [ 5.812000] ... APIC LVT0: 00010700 [ 5.812000] ... APIC LVT1: 00000400 [ 5.812000] ... APIC LVTERR: 000000fe [ 5.812000] ... APIC TMICT: 00008236 [ 5.812000] ... APIC TMCCT: 00008029 [ 5.812000] ... APIC TDCR: 00000003 [ 5.812000] [ 5.812002] number of MP IRQ sources: 15. [ 5.816004] number of IO-APIC #0 registers: 24. [ 5.820002] number of IO-APIC #2 registers: 24. [ 5.824002] number of IO-APIC #3 registers: 24. [ 5.828002] number of IO-APIC #4 registers: 24. [ 5.832003] testing the IO APIC....................... [ 5.836007] [ 5.837607] IO APIC #0...... [ 5.840002] .... register #00: 00000000 [ 5.844002] ....... : physical APIC id: 00 [ 5.848003] ....... : Delivery Type: 0 [ 5.852002] ....... : LTS : 0 [ 5.856002] .... register #01: 00170020 [ 5.860002] ....... : max redirection entries: 0017 [ 5.864004] ....... : PRQ implemented: 0 [ 5.868002] ....... : IO APIC version: 0020 [ 5.872002] .... IRQ redirection table: [ 5.876002] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 5.880006] 00 000 1 0 0 0 0 0 0 00 [ 5.887340] 01 000 0 0 0 0 0 0 0 31 [ 5.892005] 02 000 0 0 0 0 0 0 0 30 [ 5.896006] 03 000 0 0 0 0 0 0 0 33 [ 5.903340] 04 000 0 0 0 0 0 0 0 34 [ 5.908004] 05 000 0 0 0 0 0 0 0 35 [ 5.912006] 06 000 0 0 0 0 0 0 0 36 [ 5.919339] 07 000 0 0 0 0 0 0 0 37 [ 5.924004] 08 000 0 0 0 0 0 0 0 38 [ 5.928006] 09 000 0 1 0 0 0 0 0 39 [ 5.936004] 0a 000 0 0 0 0 0 0 0 3A [ 5.940004] 0b 000 0 0 0 0 0 0 0 3B [ 5.944006] 0c 000 0 0 0 0 0 0 0 3C [ 5.952004] 0d 000 0 0 0 0 0 0 0 3D [ 5.956004] 0e 000 0 0 0 0 0 0 0 3E [ 5.960006] 0f 000 0 0 0 0 0 0 0 3F [ 5.968004] 10 000 1 0 0 0 0 0 0 00 [ 5.972004] 11 000 1 0 0 0 0 0 0 00 [ 5.979342] 12 000 1 0 0 0 0 0 0 00 [ 5.984004] 13 000 1 0 0 0 0 0 0 00 [ 5.988004] 14 000 1 0 0 0 0 0 0 00 [ 5.995339] 15 072 1 0 0 0 0 0 2 62 [ 6.000004] 16 000 1 0 0 0 0 0 0 00 [ 6.004005] 17 000 1 0 0 0 0 0 0 00 [ 6.011339] [ 6.012002] IO APIC #2...... [ 6.016002] .... register #00: 02000000 [ 6.020002] ....... : physical APIC id: 02 [ 6.024003] ....... : Delivery Type: 0 [ 6.028002] ....... : LTS : 0 [ 6.032002] .... register #01: 00178020 [ 6.036002] ....... : max redirection entries: 0017 [ 6.040003] ....... : PRQ implemented: 1 [ 6.044002] ....... : IO APIC version: 0020 [ 6.048002] .... register #02: 02000000 [ 6.052002] ....... : arbitration: 02 [ 6.056003] .... register #03: 00000001 [ 6.060002] ....... : Boot DT : 1 [ 6.064002] .... IRQ redirection table: [ 6.068002] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 6.072005] 00 000 1 0 0 0 0 0 0 00 [ 6.076003] 01 000 1 0 0 0 0 0 0 00 [ 6.083340] 02 000 1 0 0 0 0 0 0 00 [ 6.088005] 03 000 1 0 0 0 0 0 0 00 [ 6.092003] 04 000 1 0 0 0 0 0 0 00 [ 6.100003] 05 000 1 0 0 0 0 0 0 00 [ 6.104005] 06 000 1 0 0 0 0 0 0 00 [ 6.108003] 07 000 1 0 0 0 0 0 0 00 [ 6.116003] 08 000 1 0 0 0 0 0 0 00 [ 6.120005] 09 000 1 0 0 0 0 0 0 00 [ 6.124003] 0a 000 1 0 0 0 0 0 0 00 [ 6.132004] 0b 000 1 0 0 0 0 0 0 00 [ 6.136005] 0c 000 1 0 0 0 0 0 0 00 [ 6.143339] 0d 000 1 0 0 0 0 0 0 00 [ 6.148004] 0e 000 1 0 0 0 0 0 0 00 [ 6.152005] 0f 000 1 0 0 0 0 0 0 00 [ 6.159341] 10 000 1 0 0 0 0 0 0 00 [ 6.164003] 11 000 1 0 0 0 0 0 0 00 [ 6.168005] 12 000 1 0 0 0 0 0 0 00 [ 6.175340] 13 000 1 0 0 0 0 0 0 00 [ 6.180003] 14 000 1 0 0 0 0 0 0 00 [ 6.184005] 15 000 1 0 0 0 0 0 0 00 [ 6.192003] 16 000 1 0 0 0 0 0 0 00 [ 6.196003] 17 000 1 0 0 0 0 0 0 00 [ 6.200006] [ 6.204002] IO APIC #3...... [ 6.206993] .... register #00: 03000000 [ 6.208002] ....... : physical APIC id: 03 [ 6.212002] ....... : Delivery Type: 0 [ 6.216003] ....... : LTS : 0 [ 6.220002] .... register #01: 00178020 [ 6.224002] ....... : max redirection entries: 0017 [ 6.228002] ....... : PRQ implemented: 1 [ 6.232003] ....... : IO APIC version: 0020 [ 6.236002] .... register #02: 03000000 [ 6.240002] ....... : arbitration: 03 [ 6.244002] .... register #03: 00000001 [ 6.248003] ....... : Boot DT : 1 [ 6.252002] .... IRQ redirection table: [ 6.256002] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 6.260004] 00 000 1 0 0 0 0 0 0 00 [ 6.264005] 01 000 1 0 0 0 0 0 0 00 [ 6.268003] 02 000 1 0 0 0 0 0 0 00 [ 6.276004] 03 000 1 0 0 0 0 0 0 00 [ 6.280005] 04 000 1 0 0 0 0 0 0 00 [ 6.284003] 05 000 1 0 0 0 0 0 0 00 [ 6.292003] 06 000 1 0 0 0 0 0 0 00 [ 6.296005] 07 000 1 0 0 0 0 0 0 00 [ 6.303339] 08 000 1 0 0 0 0 0 0 00 [ 6.308003] 09 000 1 0 0 0 0 0 0 00 [ 6.312005] 0a 000 1 0 0 0 0 0 0 00 [ 6.319340] 0b 000 1 0 0 0 0 0 0 00 [ 6.324003] 0c 000 1 0 0 0 0 0 0 00 [ 6.328005] 0d 000 1 0 0 0 0 0 0 00 [ 6.335338] 0e 000 1 0 0 0 0 0 0 00 [ 6.340003] 0f 000 1 0 0 0 0 0 0 00 [ 6.344005] 10 000 1 0 0 0 0 0 0 00 [ 6.352003] 11 000 1 0 0 0 0 0 0 00 [ 6.356003] 12 000 1 0 0 0 0 0 0 00 [ 6.360005] 13 000 1 0 0 0 0 0 0 00 [ 6.368003] 14 000 1 0 0 0 0 0 0 00 [ 6.372003] 15 000 1 0 0 0 0 0 0 00 [ 6.376005] 16 000 1 0 0 0 0 0 0 00 [ 6.384003] 17 000 1 0 0 0 0 0 0 00 [ 6.388005] [ 6.389607] IO APIC #4...... [ 6.392003] .... register #00: 04000000 [ 6.396002] ....... : physical APIC id: 04 [ 6.400002] ....... : Delivery Type: 0 [ 6.404003] ....... : LTS : 0 [ 6.408004] .... register #01: 00170020 [ 6.412002] ....... : max redirection entries: 0017 [ 6.416002] ....... : PRQ implemented: 0 [ 6.420002] ....... : IO APIC version: 0020 [ 6.424003] .... register #02: 00000000 [ 6.428002] ....... : arbitration: 00 [ 6.432002] .... register #03: 00000001 [ 6.436002] ....... : Boot DT : 1 [ 6.440003] .... IRQ redirection table: [ 6.444002] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 6.448004] 00 000 1 0 0 0 0 0 0 00 [ 6.456005] 01 000 1 0 0 0 0 0 0 00 [ 6.460003] 02 000 1 0 0 0 0 0 0 00 [ 6.467340] 03 000 1 0 0 0 0 0 0 00 [ 6.472005] 04 000 1 0 0 0 0 0 0 00 [ 6.476003] 05 000 1 0 0 0 0 0 0 00 [ 6.483338] 06 000 1 0 0 0 0 0 0 00 [ 6.488005] 07 000 1 0 0 0 0 0 0 00 [ 6.492003] 08 000 1 0 0 0 0 0 0 00 [ 6.499338] 09 000 1 0 0 0 0 0 0 00 [ 6.504005] 0a 000 1 0 0 0 0 0 0 00 [ 6.508004] 0b 000 1 0 0 0 0 0 0 00 [ 6.516004] 0c 000 1 0 0 0 0 0 0 00 [ 6.520005] 0d 000 1 0 0 0 0 0 0 00 [ 6.524004] 0e 000 1 0 0 0 0 0 0 00 [ 6.532004] 0f 000 1 0 0 0 0 0 0 00 [ 6.536005] 10 000 1 0 0 0 0 0 0 00 [ 6.540004] 11 000 1 0 0 0 0 0 0 00 [ 6.548003] 12 000 1 0 0 0 0 0 0 00 [ 6.552005] 13 000 1 0 0 0 0 0 0 00 [ 6.559338] 14 000 1 0 0 0 0 0 0 00 [ 6.564003] 15 000 1 0 0 0 0 0 0 00 [ 6.568005] 16 000 1 0 0 0 0 0 0 00 [ 6.575340] 17 000 1 0 0 0 0 0 0 00 [ 6.580002] IRQ to pin mappings: [ 6.584004] IRQ0 -> 0:2 [ 6.588002] IRQ1 -> 0:1 [ 6.590681] IRQ3 -> 0:3 [ 6.592891] IRQ4 -> 0:4 [ 6.596300] IRQ5 -> 0:5 [ 6.598983] IRQ6 -> 0:6 [ 6.600890] IRQ7 -> 0:7 [ 6.604301] IRQ8 -> 0:8 [ 6.606982] IRQ9 -> 0:9 [ 6.608889] IRQ10 -> 0:10 [ 6.612977] IRQ11 -> 0:11 [ 6.615840] IRQ12 -> 0:12 [ 6.616976] IRQ13 -> 0:13 [ 6.620975] IRQ14 -> 0:14 [ 6.624301] IRQ15 -> 0:15 [ 6.627154] .................................... done. [ 6.628007] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 6.633505] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 6.638006] Switching to clocksource hpet [ 6.674433] pnp: PnP ACPI init [ 6.677662] ACPI: bus type pnp registered [ 6.682031] pnp 00:00: [bus 00-ff] [ 6.685561] pnp 00:00: [io 0x0cf8-0x0cff] [ 6.689781] pnp 00:00: [io 0x0000-0x0cf7 window] [ 6.694607] pnp 00:00: [io 0x0d00-0xffff window] [ 6.699434] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 6.704955] pnp 00:00: [mem 0x00000000 window] [ 6.709521] pnp 00:00: [mem 0xc0000000-0xffffffff window] [ 6.715345] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 6.722787] pnp 00:01: [mem 0xfc000000-0xfcffffff] [ 6.727697] pnp 00:01: [mem 0xfd000000-0xfdffffff] [ 6.732609] pnp 00:01: [mem 0xfe000000-0xfe9fffff] [ 6.737523] pnp 00:01: [mem 0xfea00000-0xfea0001f] [ 6.742437] pnp 00:01: [mem 0xfeb00000-0xfebfffff] [ 6.747351] pnp 00:01: [mem 0xfed00400-0xfed3ffff] [ 6.752268] pnp 00:01: [mem 0xfed45000-0xfedfffff] [ 6.757447] pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 6.764729] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 6.770772] pnp 00:02: [io 0x0290-0x029f] [ 6.774989] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 6.781032] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 6.787071] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 6.793373] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 6.800105] pnp 00:03: [io 0x0060] [ 6.803706] pnp 00:03: [io 0x0064] [ 6.807332] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 6.814835] pnp 00:03: [irq 1] [ 6.818179] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 6.825719] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 6.833391] pnp 00:04: [irq 12] [ 6.836819] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 6.845891] pnp 00:05: [io 0x03f8-0x03ff] [ 6.850116] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) [ 6.857613] pnp 00:05: [irq 4] [ 6.860789] pnp 00:05: [dma 0 disabled] [ 6.864956] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 6.872742] pnp 00:06: [io 0x02f8-0x02ff] [ 6.876966] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) [ 6.884461] pnp 00:06: [irq 3] [ 6.887626] pnp 00:06: [dma 0 disabled] [ 6.891802] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 6.899021] pnp 00:07: [dma 4] [ 6.902201] pnp 00:07: [io 0x0000-0x000f] [ 6.906418] pnp 00:07: [io 0x0081-0x0083] [ 6.910639] pnp 00:07: [io 0x0087] [ 6.914245] pnp 00:07: [io 0x0089-0x008b] [ 6.918465] pnp 00:07: [io 0x008f] [ 6.922071] pnp 00:07: [io 0x00c0-0x00df] [ 6.926467] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active) [ 6.933145] pnp 00:08: [io 0x0070-0x0071] [ 6.937369] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 6.944869] pnp 00:08: [irq 8] [ 6.948220] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active) [ 6.954894] pnp 00:09: [io 0x0061] [ 6.958681] pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active) [ 6.965380] pnp 00:0a: [io 0x0010-0x001f] [ 6.969601] pnp 00:0a: [io 0x0022-0x003f] [ 6.973820] pnp 00:0a: [io 0x0044-0x005f] [ 6.978039] pnp 00:0a: [io 0x0062-0x0063] [ 6.982250] pnp 00:0a: [io 0x0065-0x006f] [ 6.986465] pnp 00:0a: [io 0x0072-0x007f] [ 6.990684] pnp 00:0a: [io 0x0080] [ 6.994289] pnp 00:0a: [io 0x0084-0x0086] [ 6.998510] pnp 00:0a: [io 0x0088] [ 7.002127] pnp 00:0a: [io 0x008c-0x008e] [ 7.006344] pnp 00:0a: [io 0x0090-0x009f] [ 7.010566] pnp 00:0a: [io 0x00a2-0x00bf] [ 7.014787] pnp 00:0a: [io 0x00e0-0x00ef] [ 7.019008] pnp 00:0a: [io 0x04d0-0x04d1] [ 7.023500] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 7.030180] pnp 00:0b: [io 0x00f0-0x00ff] [ 7.034402] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 7.042074] pnp 00:0b: [irq 13] [ 7.045518] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active) [ 7.052962] pnp 00:0c: [io 0x0400-0x047f] [ 7.057185] pnp 00:0c: [io 0x1180-0x119f] [ 7.061403] pnp 00:0c: [io 0x0500-0x057f] [ 7.065616] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff] [ 7.070531] pnp 00:0c: [mem 0xfec00000-0xfecfffff] [ 7.075443] pnp 00:0c: [mem 0xff000000-0xffffffff] [ 7.080633] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 7.087778] pnp 00:0d: [mem 0xfed00000-0xfed003ff] [ 7.092914] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active) [ 7.100225] pnp: PnP ACPI: found 14 devices [ 7.104530] ACPI: ACPI bus type pnp unregistered [ 7.109288] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved [ 7.116021] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved [ 7.122757] system 00:01: [mem 0xfe000000-0xfe9fffff] has been reserved [ 7.129491] system 00:01: [mem 0xfea00000-0xfea0001f] has been reserved [ 7.136225] system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved [ 7.142959] system 00:01: [mem 0xfed00400-0xfed3ffff] could not be reserved [ 7.150038] system 00:01: [mem 0xfed45000-0xfedfffff] has been reserved [ 7.156781] system 00:02: [io 0x0290-0x029f] has been reserved [ 7.162832] system 00:0a: [io 0x04d0-0x04d1] has been reserved [ 7.168879] system 00:0c: [io 0x0400-0x047f] has been reserved [ 7.174922] system 00:0c: [io 0x1180-0x119f] has been reserved [ 7.180961] system 00:0c: [io 0x0500-0x057f] could not be reserved [ 7.187349] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 7.194085] system 00:0c: [mem 0xfec00000-0xfecfffff] could not be reserved [ 7.201173] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved [ 7.223941] pci 0000:00:1c.0: BAR 9: assigned [mem 0xd0000000-0xd01fffff 64bit pref] [ 7.231881] pci 0000:00:1c.4: BAR 9: assigned [mem 0xd0200000-0xd03fffff 64bit pref] [ 7.239819] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 7.245164] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 7.251379] pci 0000:00:01.0: bridge window [mem 0xfba00000-0xfbbfffff] [ 7.258295] pci 0000:00:01.0: bridge window [mem pref disabled] [ 7.264510] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 7.269853] pci 0000:00:03.0: bridge window [io disabled] [ 7.275638] pci 0000:00:03.0: bridge window [mem disabled] [ 7.281418] pci 0000:00:03.0: bridge window [mem pref disabled] [ 7.287635] pci 0000:00:05.0: PCI bridge to [bus 04-04] [ 7.292985] pci 0000:00:05.0: bridge window [io disabled] [ 7.298769] pci 0000:00:05.0: bridge window [mem disabled] [ 7.304548] pci 0000:00:05.0: bridge window [mem pref disabled] [ 7.310764] pci 0000:00:07.0: PCI bridge to [bus 05-05] [ 7.316109] pci 0000:00:07.0: bridge window [io disabled] [ 7.321891] pci 0000:00:07.0: bridge window [mem disabled] [ 7.327672] pci 0000:00:07.0: bridge window [mem pref disabled] [ 7.333897] pci 0000:06:00.0: PCI bridge to [bus 07-07] [ 7.339246] pci 0000:06:00.0: bridge window [io disabled] [ 7.345031] pci 0000:06:00.0: bridge window [mem disabled] [ 7.350812] pci 0000:06:00.0: bridge window [mem pref disabled] [ 7.357027] pci 0000:06:00.2: PCI bridge to [bus 08-08] [ 7.362373] pci 0000:06:00.2: bridge window [io 0xd000-0xdfff] [ 7.368587] pci 0000:06:00.2: bridge window [mem 0xfb700000-0xfb9fffff] [ 7.375494] pci 0000:06:00.2: bridge window [mem pref disabled] [ 7.381710] pci 0000:00:09.0: PCI bridge to [bus 06-08] [ 7.387055] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 7.393270] pci 0000:00:09.0: bridge window [mem 0xfb700000-0xfb9fffff] [ 7.400186] pci 0000:00:09.0: bridge window [mem pref disabled] [ 7.406400] pci 0000:00:1c.0: PCI bridge to [bus 09-09] [ 7.411745] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff] [ 7.417961] pci 0000:00:1c.0: bridge window [mem 0xfb400000-0xfb6fffff] [ 7.424877] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref] [ 7.432810] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a] [ 7.438160] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 7.444379] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff] [ 7.451293] pci 0000:00:1c.4: bridge window [mem 0xd0200000-0xd03fffff 64bit pref] [ 7.459226] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] [ 7.464578] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 7.470793] pci 0000:00:1e.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 7.477707] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 7.485663] IOAPIC[3]: Set routing entry (4-4 -> 0x29 -> IRQ 76 Mode:1 Active:1) [ 7.493251] pci 0000:00:01.0: PCI INT A -> GSI 76 (level, low) -> IRQ 76 [ 7.500077] pci 0000:00:01.0: setting latency timer to 64 [ 7.505605] IOAPIC[3]: Set routing entry (4-0 -> 0x41 -> IRQ 72 Mode:1 Active:1) [ 7.514776] pci 0000:00:03.0: PCI INT A -> GSI 72 (level, low) -> IRQ 72 [ 7.521605] pci 0000:00:03.0: setting latency timer to 64 [ 7.527134] IOAPIC[3]: Set routing entry (4-2 -> 0x49 -> IRQ 74 Mode:1 Active:1) [ 7.534719] pci 0000:00:05.0: PCI INT A -> GSI 74 (level, low) -> IRQ 74 [ 7.541549] pci 0000:00:05.0: setting latency timer to 64 [ 7.547074] IOAPIC[3]: Set routing entry (4-6 -> 0x51 -> IRQ 78 Mode:1 Active:1) [ 7.554661] pci 0000:00:07.0: PCI INT A -> GSI 78 (level, low) -> IRQ 78 [ 7.561489] pci 0000:00:07.0: setting latency timer to 64 [ 7.567017] IOAPIC[3]: Set routing entry (4-8 -> 0x59 -> IRQ 80 Mode:1 Active:1) [ 7.574603] pci 0000:00:09.0: PCI INT A -> GSI 80 (level, low) -> IRQ 80 [ 7.581431] pci 0000:00:09.0: setting latency timer to 64 [ 7.586958] pci 0000:06:00.0: setting latency timer to 64 [ 7.592487] pci 0000:06:00.2: setting latency timer to 64 [ 7.598020] IOAPIC[0]: Set routing entry (0-17 -> 0x61 -> IRQ 17 Mode:1 Active:1) [ 7.605689] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.612519] pci 0000:00:1c.0: setting latency timer to 64 [ 7.618043] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.624867] pci 0000:00:1c.4: setting latency timer to 64 [ 7.630394] pci 0000:00:1e.0: setting latency timer to 64 [ 7.635916] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 7.641609] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 7.647303] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 7.653694] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff] [ 7.660088] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 7.665779] pci_bus 0000:01: resource 1 [mem 0xfba00000-0xfbbfffff] [ 7.672168] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff] [ 7.677863] pci_bus 0000:06: resource 1 [mem 0xfb700000-0xfb9fffff] [ 7.684250] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 7.689943] pci_bus 0000:08: resource 1 [mem 0xfb700000-0xfb9fffff] [ 7.696331] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 7.702025] pci_bus 0000:09: resource 1 [mem 0xfb400000-0xfb6fffff] [ 7.708411] pci_bus 0000:09: resource 2 [mem 0xd0000000-0xd01fffff 64bit pref] [ 7.715822] pci_bus 0000:0a: resource 0 [io 0xb000-0xbfff] [ 7.721516] pci_bus 0000:0a: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 7.727902] pci_bus 0000:0a: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref] [ 7.735314] pci_bus 0000:0b: resource 0 [io 0xa000-0xafff] [ 7.741006] pci_bus 0000:0b: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 7.747394] pci_bus 0000:0b: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref] [ 7.754810] pci_bus 0000:0b: resource 4 [io 0x0000-0x0cf7] [ 7.760507] pci_bus 0000:0b: resource 5 [io 0x0d00-0xffff] [ 7.766202] pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff] [ 7.772591] pci_bus 0000:0b: resource 7 [mem 0xc0000000-0xffffffff] [ 7.779324] NET: Registered protocol family 2 [ 7.785114] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 7.795941] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 7.806256] TCP bind hash table entries: 65536 (order: 10, 5242880 bytes) [ 7.815962] TCP: Hash tables configured (established 524288 bind 65536) [ 7.822733] TCP reno registered [ 7.826338] UDP hash table entries: 8192 (order: 8, 1572864 bytes) [ 7.833701] UDP-Lite hash table entries: 8192 (order: 8, 1572864 bytes) [ 7.841651] NET: Registered protocol family 1 [ 7.846609] RPC: Registered udp transport module. [ 7.851441] RPC: Registered tcp transport module. [ 7.856264] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 7.862911] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x003f [ 7.869572] pci 0000:00:1a.0: Performing full reset [ 7.874594] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x003f [ 7.881244] pci 0000:00:1a.2: Performing full reset [ 7.886323] pci 0000:00:1a.7: EHCI: BIOS handoff [ 7.916097] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x103f [ 7.922751] pci 0000:00:1d.0: Performing full reset [ 7.927764] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x003f [ 7.934411] pci 0000:00:1d.1: Performing full reset [ 7.939429] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x003f [ 7.946075] pci 0000:00:1d.2: Performing full reset [ 7.951142] pci 0000:00:1d.7: EHCI: BIOS handoff [ 7.980208] pci 0000:0b:01.0: Boot video device [ 7.984871] PCI: CLS 64 bytes, default 64 [ 7.989128] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 7.995694] Placing 64MB software IO TLB between ffff8800b7800000 - ffff8800bb800000 [ 8.003626] software IO TLB at phys 0xb7800000 - 0xbb800000 [ 8.027581] Machine check injector initialized [ 8.039720] microcode: CPU0 sig=0x206c1, pf=0x1, revision=0x3 [ 8.045591] microcode: CPU1 sig=0x206c1, pf=0x1, revision=0x3 [ 8.051466] microcode: CPU2 sig=0x206c1, pf=0x1, revision=0x3 [ 8.057343] microcode: CPU3 sig=0x206c1, pf=0x1, revision=0x3 [ 8.063216] microcode: CPU4 sig=0x206c1, pf=0x1, revision=0x3 [ 8.069094] microcode: CPU5 sig=0x206c1, pf=0x1, revision=0x3 [ 8.074969] microcode: CPU6 sig=0x206c1, pf=0x1, revision=0x3 [ 8.080847] microcode: CPU7 sig=0x206c1, pf=0x1, revision=0x3 [ 8.086725] microcode: CPU8 sig=0x206c1, pf=0x1, revision=0x3 [ 8.092597] microcode: CPU9 sig=0x206c1, pf=0x1, revision=0x3 [ 8.098464] microcode: CPU10 sig=0x206c1, pf=0x1, revision=0x3 [ 8.104417] microcode: CPU11 sig=0x206c1, pf=0x1, revision=0x3 [ 8.110375] microcode: CPU12 sig=0x206c1, pf=0x1, revision=0x3 [ 8.116344] microcode: CPU13 sig=0x206c1, pf=0x1, revision=0x3 [ 8.122306] microcode: CPU14 sig=0x206c1, pf=0x1, revision=0x3 [ 8.128261] microcode: CPU15 sig=0x206c1, pf=0x1, revision=0x3 [ 8.134224] microcode: CPU16 sig=0x206c1, pf=0x1, revision=0x3 [ 8.140186] microcode: CPU17 sig=0x206c1, pf=0x1, revision=0x3 [ 8.146134] microcode: CPU18 sig=0x206c1, pf=0x1, revision=0x3 [ 8.152102] microcode: CPU19 sig=0x206c1, pf=0x1, revision=0x3 [ 8.158064] microcode: CPU20 sig=0x206c1, pf=0x1, revision=0x3 [ 8.164021] microcode: CPU21 sig=0x206c1, pf=0x1, revision=0x3 [ 8.169980] microcode: CPU22 sig=0x206c1, pf=0x1, revision=0x3 [ 8.175937] microcode: CPU23 sig=0x206c1, pf=0x1, revision=0x3 [ 8.182034] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 8.191005] Scanning for low memory corruption every 60 seconds [ 8.197887] audit: initializing netlink socket (disabled) [ 8.203448] type=2000 audit(1293791323.200:1): initialized [ 8.223644] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 8.233718] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 8.240898] fuse init (API version 7.15) [ 8.245360] JFS: nTxBlock = 8192, nTxLock = 65536 [ 8.254843] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 8.265980] Btrfs loaded [ 8.268650] msgmni has been set to 31955 [ 8.274125] async_tx: api initialized (async) [ 8.278806] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 8.286398] io scheduler noop registered [ 8.290444] io scheduler deadline registered [ 8.294995] io scheduler cfq registered (default) [ 8.301685] pcieport 0000:00:01.0: ACPI _OSC control granted for 0x1c [ 8.308270] pcieport 0000:00:01.0: setting latency timer to 64 [ 8.314276] pcieport 0000:00:01.0: irq 112 for MSI/MSI-X [ 8.321330] pcieport 0000:00:03.0: ACPI _OSC control granted for 0x1c [ 8.327905] pcieport 0000:00:03.0: setting latency timer to 64 [ 8.333909] pcieport 0000:00:03.0: irq 113 for MSI/MSI-X [ 8.340975] pcieport 0000:00:05.0: ACPI _OSC control granted for 0x1c [ 8.347553] pcieport 0000:00:05.0: setting latency timer to 64 [ 8.353547] pcieport 0000:00:05.0: irq 114 for MSI/MSI-X [ 8.360620] pcieport 0000:00:07.0: ACPI _OSC control granted for 0x1c [ 8.367201] pcieport 0000:00:07.0: setting latency timer to 64 [ 8.373204] pcieport 0000:00:07.0: irq 115 for MSI/MSI-X [ 8.380265] pcieport 0000:00:09.0: ACPI _OSC control granted for 0x1c [ 8.386838] pcieport 0000:00:09.0: setting latency timer to 64 [ 8.392833] pcieport 0000:00:09.0: irq 116 for MSI/MSI-X [ 8.399892] pcieport 0000:00:1c.0: ACPI _OSC control granted for 0x1c [ 8.406467] pcieport 0000:00:1c.0: setting latency timer to 64 [ 8.412470] pcieport 0000:00:1c.0: irq 117 for MSI/MSI-X [ 8.419521] pcieport 0000:00:1c.4: ACPI _OSC control granted for 0x1c [ 8.426097] pcieport 0000:00:1c.4: setting latency timer to 64 [ 8.432099] pcieport 0000:00:1c.4: irq 118 for MSI/MSI-X [ 8.438080] aer 0000:00:01.0:pcie02: service driver aer loaded [ 8.444086] aer 0000:00:03.0:pcie02: service driver aer loaded [ 8.450095] aer 0000:00:05.0:pcie02: service driver aer loaded [ 8.456099] aer 0000:00:07.0:pcie02: service driver aer loaded [ 8.462109] aer 0000:00:09.0:pcie02: service driver aer loaded [ 8.468301] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 8.475051] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 8.483433] ACPI: Sleep Button [SLPB] [ 8.487406] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 8.495784] ACPI: Power Button [PWRB] [ 8.499768] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 8.507358] ACPI: Power Button [PWRF] [ 8.512545] ACPI: acpi_idle registered with cpuidle [ 8.518375] Monitor-Mwait will be used to enter C-3 state [ 8.523959] Monitor-Mwait will be used to enter C-3 state [ 8.638255] Initializing Nozomi driver 2.1d (build date: Dec 31 2010 09:03:57) [ 8.646679] Non-volatile memory driver v1.3 [ 8.651495] Linux agpgart interface v0.103 [ 8.655854] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 8.665001] Hangcheck: Using getrawmonotonic(). [ 8.669781] [drm] Initialized drm 1.1.0 20060810 [ 8.674526] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module! [ 8.682206] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 8.709095] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 8.796374] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 9.017013] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 9.104720] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 12.192126] floppy0: no floppy controllers found [ 12.202576] brd: module loaded [ 12.208297] loop: module loaded [ 12.212548] Loading iSCSI transport class v2.0-870. [ 12.218859] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 12.224555] Detecting Adaptec I2O RAID controllers... [ 12.230040] Adaptec aacraid driver 1.1-5[26400]-ms [ 12.235592] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 12.242978] QLogic Fibre Channel HBA Driver: 8.03.05-k0 [ 12.248691] iscsi: registered transport (qla4xxx) [ 12.253650] QLogic iSCSI HBA Driver [ 12.257391] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 12.265026] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 12.272235] megasas: 00.00.04.31-rc1 Mon. May 3, 11:41:51 PST 2010 [ 12.278673] mpt2sas version 06.100.00.00 loaded [ 12.284061] ahci 0000:00:1f.2: version 3.0 [ 12.288298] IOAPIC[0]: Set routing entry (0-19 -> 0xa1 -> IRQ 19 Mode:1 Active:1) [ 12.295968] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 12.302971] ahci 0000:00:1f.2: irq 119 for MSI/MSI-X [ 12.308167] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 12.316534] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ccc ems sxs [ 12.324725] ahci 0000:00:1f.2: setting latency timer to 64 [ 12.370784] scsi0 : ahci [ 12.373951] scsi1 : ahci [ 12.376941] scsi2 : ahci [ 12.379918] scsi3 : ahci [ 12.382901] scsi4 : ahci [ 12.385891] scsi5 : ahci [ 12.389384] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 119 [ 12.397843] ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 119 [ 12.406290] ata3: SATA max UDMA/133 abar m2048@0xfbe21000 port 0xfbe21200 irq 119 [ 12.413960] ata4: SATA max UDMA/133 abar m2048@0xfbe21000 port 0xfbe21280 irq 119 [ 12.421630] ata5: SATA max UDMA/133 abar m2048@0xfbe21000 port 0xfbe21300 irq 119 [ 12.429302] ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 119 [ 12.442181] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 12.449348] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 12.455351] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2 [ 12.461394] e1000e: Copyright (c) 1999 - 2010 Intel Corporation. [ 12.467657] Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2 [ 12.474393] Copyright (c) 2007-2009 Intel Corporation. [ 12.479694] igb 0000:01:00.0: PCI INT A -> GSI 76 (level, low) -> IRQ 76 [ 12.486531] igb 0000:01:00.0: setting latency timer to 64 [ 12.492375] igb 0000:01:00.0: irq 120 for MSI/MSI-X [ 12.497382] igb 0000:01:00.0: irq 121 for MSI/MSI-X [ 12.502382] igb 0000:01:00.0: irq 122 for MSI/MSI-X [ 12.507382] igb 0000:01:00.0: irq 123 for MSI/MSI-X [ 12.512382] igb 0000:01:00.0: irq 124 for MSI/MSI-X [ 12.517383] igb 0000:01:00.0: irq 125 for MSI/MSI-X [ 12.522384] igb 0000:01:00.0: irq 126 for MSI/MSI-X [ 12.527383] igb 0000:01:00.0: irq 127 for MSI/MSI-X [ 12.532390] igb 0000:01:00.0: irq 128 for MSI/MSI-X [ 12.753503] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 12.756038] ata3: SATA link down (SStatus 0 SControl 300) [ 12.756082] ata5: SATA link down (SStatus 0 SControl 300) [ 12.756114] ata4: SATA link down (SStatus 0 SControl 300) [ 12.777043] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:30:48:cf:17:26 [ 12.784378] igb 0000:01:00.0: eth0: PBA No: 0010ff-0ff [ 12.789642] igb 0000:01:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 12.797434] IOAPIC[3]: Set routing entry (4-16 -> 0x2a -> IRQ 88 Mode:1 Active:1) [ 12.805108] igb 0000:01:00.1: PCI INT B -> GSI 88 (level, low) -> IRQ 88 [ 12.811944] igb 0000:01:00.1: setting latency timer to 64 [ 12.817782] igb 0000:01:00.1: irq 129 for MSI/MSI-X [ 12.822789] igb 0000:01:00.1: irq 130 for MSI/MSI-X [ 12.827796] igb 0000:01:00.1: irq 131 for MSI/MSI-X [ 12.832797] igb 0000:01:00.1: irq 132 for MSI/MSI-X [ 12.837797] igb 0000:01:00.1: irq 133 for MSI/MSI-X [ 12.842799] igb 0000:01:00.1: irq 134 for MSI/MSI-X [ 12.847799] igb 0000:01:00.1: irq 135 for MSI/MSI-X [ 12.852799] igb 0000:01:00.1: irq 136 for MSI/MSI-X [ 12.857799] igb 0000:01:00.1: irq 137 for MSI/MSI-X [ 13.069494] igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection [ 13.076492] igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:30:48:cf:17:27 [ 13.083825] igb 0000:01:00.1: eth1: PBA No: 0010ff-0ff [ 13.089081] igb 0000:01:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 13.096944] Intel(R) Virtual Function Network Driver - version 1.0.0-k0 [ 13.103678] Copyright (c) 2009 Intel Corporation. [ 13.108635] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 2.0.84-k2 [ 13.116652] ixgbe: Copyright (c) 1999-2010 Intel Corporation. [ 13.122656] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 13.129911] ixgb: Copyright (c) 1999-2008 Intel Corporation. [ 13.136378] jme: JMicron JMC2XX ethernet driver version 1.0.7 [ 13.142720] ns83820.c: National Semiconductor DP83820 10/100/1000 driver. [ 13.149992] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.6 (Oct 12, 2010) [ 13.157686] sky2: driver version 1.28 [ 13.160041] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 13.160081] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 13.160112] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 13.161159] ata1.00: ATA-8: ST31000528AS, CC35, max UDMA/133 [ 13.161162] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 13.162436] ata1.00: configured for UDMA/133 [ 13.162684] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC35 PQ: 0 ANSI: 5 [ 13.163069] ata6.00: ATAPI: Slimtype DVD A DS8A2S, 6P5D, max UDMA/100 [ 13.163163] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 13.163271] sd 0:0:0:0: [sda] Write Protect is off [ 13.163273] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 13.163316] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.166838] ata6.00: configured for UDMA/100 [ 13.173911] sda: sda1 sda2 [ 13.203240] ata2.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133 [ 13.203243] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 13.260134] sd 0:0:0:0: [sda] Attached SCSI disk [ 13.261158] tun: Universal TUN/TAP device driver, 1.6 [ 13.261159] tun: (C) 1999-2004 Max Krasnyansky [ 13.261535] ata2.00: configured for UDMA/133 [ 13.261598] usbcore: registered new interface driver catc [ 13.261600] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver [ 13.261681] usbcore: registered new interface driver kaweth [ 13.261682] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 13.261731] scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 13.261769] usbcore: registered new interface driver pegasus [ 13.261770] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver [ 13.261907] usbcore: registered new interface driver rtl8150 [ 13.262031] usbcore: registered new interface driver asix [ 13.262170] usbcore: registered new interface driver cdc_ether [ 13.262198] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 13.262331] sd 1:0:0:0: [sdb] Write Protect is off [ 13.262333] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 13.262366] usbcore: registered new interface driver cdc_eem [ 13.262377] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.262524] usbcore: registered new interface driver dm9601 [ 13.262631] usbcore: registered new interface driver smsc75xx [ 13.262754] usbcore: registered new interface driver smsc95xx [ 13.262856] usbcore: registered new interface driver gl620a [ 13.262955] usbcore: registered new interface driver net1080 [ 13.263044] usbcore: registered new interface driver plusb [ 13.263132] usbcore: registered new interface driver rndis_host [ 13.263222] usbcore: registered new interface driver cdc_subset [ 13.263310] usbcore: registered new interface driver zaurus [ 13.263403] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 13.263497] usbcore: registered new interface driver int51x1 [ 13.263500] netconsole: local port 6665 [ 13.263502] netconsole: local IP 10.0.0.0 [ 13.263503] netconsole: interface 'eth0' [ 13.263504] netconsole: remote port 6666 [ 13.263505] netconsole: remote IP 192.168.1.11 [ 13.263506] netconsole: remote ethernet address 00:30:48:fe:19:95 [ 13.263508] netconsole: device eth0 not up yet, forcing it [ 13.265547] scsi 5:0:0:0: CD-ROM Slimtype DVD A DS8A2S 6P5D PQ: 0 ANSI: 5 [ 13.498199] sdb: sdb1 sdb2 sdb3 < sdb5 > [ 13.503273] sd 1:0:0:0: [sdb] Attached SCSI disk [ 15.492700] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 23.985547] console [netcon0] enabled [ 23.989332] netconsole: network logging started [ 23.994187] Fusion MPT base driver 3.04.17 [ 23.998437] Copyright (c) 1999-2008 LSI Corporation [ 24.003486] Fusion MPT SPI Host driver 3.04.17 [ 24.008193] Fusion MPT FC Host driver 3.04.17 [ 24.012807] Fusion MPT SAS Host driver 3.04.17 [ 24.017435] IOAPIC[0]: Set routing entry (0-16 -> 0x8a -> IRQ 16 Mode:1 Active:1) [ 24.025110] mptsas 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 24.032373] mptbase: ioc0: Initiating bringup [ 24.740024] ioc0: LSISAS1068E B2: Capabilities={Initiator} [ 24.745941] mptsas 0000:09:00.0: setting latency timer to 64 [ 35.695440] scsi6 : ioc0: LSISAS1068E B2, FwRev=01120000h, Ports=1, MaxQ=511, IRQ=16 [ 35.733607] mptsas: ioc0: add expander: num_phys 13, sas_addr (0x5000bb52118dc0ff) [ 35.786025] mptsas: ioc0: add expander: num_phys 12, sas_addr (0x5000bb52118dc1ff) [ 35.846402] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 18, phy 0, sas_addr 0x5000c500022d0c6d [ 35.857741] scsi 6:0:0:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 35.891189] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 14, phy 1, sas_addr 0x5000c500022d09b5 [ 35.901096] sd 6:0:0:0: [sdc] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 35.902583] scsi 6:0:1:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 35.927631] sd 6:0:1:0: [sdd] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 35.935355] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 16, phy 2, sas_addr 0x5000c500022d0f35 [ 35.945254] sd 6:0:0:0: [sdc] Write Protect is off [ 35.946782] scsi 6:0:2:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 35.958445] sd 6:0:0:0: [sdc] Mode Sense: b3 00 10 08 [ 35.971128] sd 6:0:1:0: [sdd] Write Protect is off [ 35.971798] sd 6:0:2:0: [sde] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 35.971829] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 17, phy 3, sas_addr 0x5000c500022d2a0d [ 35.971994] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 35.994031] sd 6:0:2:0: [sde] Write Protect is off [ 35.994034] sd 6:0:2:0: [sde] Mode Sense: b3 00 10 08 [ 35.994387] scsi 6:0:3:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 35.995795] sd 6:0:2:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.029452] sd 6:0:1:0: [sdd] Mode Sense: b3 00 10 08 [ 36.038039] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 15, phy 4, sas_addr 0x5000c500022d25dd [ 36.048286] sd 6:0:3:0: [sdf] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.056038] sd 6:0:1:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.056118] sdc: sdc1 sdc2 [ 36.056506] scsi 6:0:4:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 36.057942] sd 6:0:3:0: [sdf] Write Protect is off [ 36.057945] sd 6:0:3:0: [sdf] Mode Sense: b3 00 10 08 [ 36.060071] sd 6:0:3:0: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.079677] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 19, phy 5, sas_addr 0x5000c500022c3f65 [ 36.103137] sde: sde1 sde2 [ 36.107677] scsi 6:0:5:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 36.107685] sd 6:0:4:0: [sdg] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.172637] sd 6:0:4:0: [sdg] Write Protect is off [ 36.177604] sd 6:0:4:0: [sdg] Mode Sense: b3 00 10 08 [ 36.205529] sdf: sdf1 sdf2 [ 36.208482] sd 6:0:5:0: [sdh] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.212060] sd 6:0:4:0: [sdg] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.212781] mptsas: ioc0: attaching stp device: fw_channel 0, fw_id 20, phy 12, sas_addr 0x5000bb52118dc0fc [ 36.212844] sd 6:0:2:0: [sde] Attached SCSI disk [ 36.234401] sd 6:0:0:0: [sdc] Attached SCSI disk [ 36.241302] sdd: sdd1 sdd2 [ 36.290707] sdg: sdg1 sdg2 [ 36.290723] sd 6:0:5:0: [sdh] Write Protect is off [ 36.290726] sd 6:0:5:0: [sdh] Mode Sense: b3 00 10 08 [ 36.291950] scsi 6:0:6:0: Enclosure XYRATEX 3GSAS1.0-SATAEXP 1.05 PQ: 0 ANSI: 5 [ 36.292386] sd 6:0:5:0: [sdh] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.314979] sd 6:0:1:0: [sdd] Attached SCSI disk [ 36.315055] sd 6:0:3:0: [sdf] Attached SCSI disk [ 36.324100] sdh: sdh1 sdh2 [ 36.379704] sd 6:0:5:0: [sdh] Attached SCSI disk [ 36.384478] sd 6:0:4:0: [sdg] Attached SCSI disk [ 36.525613] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 28, phy 0, sas_addr 0x5000c500022c41a5 [ 36.536969] scsi 6:0:7:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 36.570282] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 29, phy 1, sas_addr 0x5000c500130f4649 [ 36.580226] sd 6:0:7:0: [sdi] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.589765] sd 6:0:7:0: [sdi] Write Protect is off [ 36.594690] sd 6:0:7:0: [sdi] Mode Sense: b3 00 10 08 [ 36.601518] sd 6:0:7:0: [sdi] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.610820] scsi 6:0:8:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 36.634165] sd 6:0:8:0: [sdj] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.643018] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 30, phy 2, sas_addr 0x5000c500130fe681 [ 36.654208] sd 6:0:8:0: [sdj] Write Protect is off [ 36.659149] sd 6:0:8:0: [sdj] Mode Sense: b3 00 10 08 [ 36.659166] scsi 6:0:9:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 36.674228] sdi: sdi1 sdi2 [ 36.676179] sd 6:0:8:0: [sdj] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.706095] sd 6:0:9:0: [sdk] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.714450] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 31, phy 3, sas_addr 0x5000c500130f4f4d [ 36.725678] sd 6:0:9:0: [sdk] Write Protect is off [ 36.730648] sd 6:0:9:0: [sdk] Mode Sense: b3 00 10 08 [ 36.730764] scsi 6:0:10:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 36.744258] sdj: sdj1 sdj2 [ 36.745580] sd 6:0:7:0: [sdi] Attached SCSI disk [ 36.746162] sd 6:0:10:0: [sdl] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.746282] sd 6:0:9:0: [sdk] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.747827] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 32, phy 4, sas_addr 0x5000c50013005f59 [ 36.748696] sd 6:0:10:0: [sdl] Write Protect is off [ 36.748699] sd 6:0:10:0: [sdl] Mode Sense: b3 00 10 08 [ 36.750123] sd 6:0:10:0: [sdl] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.755942] sdk: sdk1 sdk2 [ 36.764048] sdl: sdl1 sdl2 [ 36.772460] scsi 6:0:11:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 36.775113] sd 6:0:11:0: [sdm] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.776607] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 33, phy 5, sas_addr 0x5000c500130e21cd [ 36.777870] sd 6:0:11:0: [sdm] Write Protect is off [ 36.777874] sd 6:0:11:0: [sdm] Mode Sense: b3 00 10 08 [ 36.777989] scsi 6:0:12:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 36.779611] sd 6:0:11:0: [sdm] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.780610] sd 6:0:12:0: [sdn] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.782164] Fusion MPT misc device (ioctl) driver 3.04.17 [ 36.782306] mptctl: Registered with Fusion MPT base driver [ 36.782308] mptctl: /dev/mptctl @ (major,minor=10,220) [ 36.782482] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 36.782484] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 36.782554] IOAPIC[0]: Set routing entry (0-18 -> 0x92 -> IRQ 18 Mode:1 Active:1) [ 36.782559] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 36.782608] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 36.782612] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 36.782686] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file 'devices' [ 36.782703] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 36.782718] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 36.783330] sd 6:0:12:0: [sdn] Write Protect is off [ 36.783332] sd 6:0:12:0: [sdn] Mode Sense: b3 00 10 08 [ 36.784665] sdm: sdm1 sdm2 [ 36.784753] sd 6:0:12:0: [sdn] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.788905] sdn: sdn1 sdn2 [ 36.972339] sd 6:0:10:0: [sdl] Attached SCSI disk [ 36.977209] sd 6:0:11:0: [sdm] Attached SCSI disk [ 36.977248] sd 6:0:9:0: [sdk] Attached SCSI disk [ 36.977295] sd 6:0:12:0: [sdn] Attached SCSI disk [ 36.977309] sd 6:0:8:0: [sdj] Attached SCSI disk [ 37.004030] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 37.013188] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 37.022825] ehci_hcd 0000:00:1a.7: debug port 1 [ 37.027482] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 37.040514] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 37.047427] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 37.053334] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbe23000 [ 37.059120] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 37.072155] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 37.092028] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 37.097998] usb usb1: default language 0x0409 [ 37.102497] usb usb1: udev 1, busnum 1, minor = 0 [ 37.107322] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 37.114231] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 37.121639] usb usb1: Product: EHCI Host Controller [ 37.126641] usb usb1: Manufacturer: Linux 2.6.37-rc8-dt5+ ehci_hcd [ 37.132942] usb usb1: SerialNumber: 0000:00:1a.7 [ 37.137891] usb usb1: usb_probe_device [ 37.141766] usb usb1: configuration #1 chosen from 1 choice [ 37.147506] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 37.153532] hub 1-0:1.0: usb_probe_interface [ 37.157929] hub 1-0:1.0: usb_probe_interface - got id [ 37.163100] hub 1-0:1.0: USB hub found [ 37.166987] hub 1-0:1.0: 6 ports detected [ 37.171117] hub 1-0:1.0: standalone hub [ 37.175077] hub 1-0:1.0: no power switching (usb 1.0) [ 37.180252] hub 1-0:1.0: individual port over-current protection [ 37.186380] hub 1-0:1.0: power on to power good time: 20ms [ 37.192025] hub 1-0:1.0: local power source is good [ 37.197024] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 37.204091] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 37.211931] IOAPIC[0]: Set routing entry (0-23 -> 0x9a -> IRQ 23 Mode:1 Active:1) [ 37.219613] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 37.226901] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 37.232861] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 37.238216] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '002' [ 37.245892] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 37.268032] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 37.277191] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 37.286809] ehci_hcd 0000:00:1d.7: debug port 1 [ 37.291465] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 37.304511] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 37.311422] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 37.317351] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 37.317372] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbe22000 [ 37.317376] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 37.321260] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 37.332031] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 37.332105] usb usb2: default language 0x0409 [ 37.332124] usb usb2: udev 1, busnum 2, minor = 128 [ 37.332125] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 37.332127] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 37.332128] usb usb2: Product: EHCI Host Controller [ 37.332130] usb usb2: Manufacturer: Linux 2.6.37-rc8-dt5+ ehci_hcd [ 37.332131] usb usb2: SerialNumber: 0000:00:1d.7 [ 37.332304] usb usb2: usb_probe_device [ 37.332306] usb usb2: configuration #1 chosen from 1 choice [ 37.332318] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 37.332421] hub 2-0:1.0: usb_probe_interface [ 37.332423] hub 2-0:1.0: usb_probe_interface - got id [ 37.332424] hub 2-0:1.0: USB hub found [ 37.332434] hub 2-0:1.0: 6 ports detected [ 37.332435] hub 2-0:1.0: standalone hub [ 37.332436] hub 2-0:1.0: no power switching (usb 1.0) [ 37.332437] hub 2-0:1.0: individual port over-current protection [ 37.332438] hub 2-0:1.0: power on to power good time: 20ms [ 37.332449] hub 2-0:1.0: local power source is good [ 37.332451] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 37.332520] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 37.332750] uhci_hcd: USB Universal Host Controller Interface driver [ 37.471856] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 37.480892] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 37.488162] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 37.494117] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 37.499475] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '003' [ 37.507157] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 37.514759] hub 2-0:1.0: port 1: status 0501 change 0001 [ 37.532024] uhci_hcd 0000:00:1a.0: detected 2 ports [ 37.537035] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 37.543861] uhci_hcd 0000:00:1a.0: Performing full reset [ 37.549310] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 37.555190] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0c0 [ 37.561123] usb usb3: default language 0x0409 [ 37.565625] usb usb3: udev 1, busnum 3, minor = 256 [ 37.570623] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 37.577531] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 37.584940] usb usb3: Product: UHCI Host Controller [ 37.589941] usb usb3: Manufacturer: Linux 2.6.37-rc8-dt5+ uhci_hcd [ 37.596242] usb usb3: SerialNumber: 0000:00:1a.0 [ 37.601185] usb usb3: usb_probe_device [ 37.605057] usb usb3: configuration #1 chosen from 1 choice [ 37.612347] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 37.618353] hub 3-0:1.0: usb_probe_interface [ 37.622749] hub 3-0:1.0: usb_probe_interface - got id [ 37.627927] hub 3-0:1.0: USB hub found [ 37.631816] hub 2-0:1.0: state 7 ports 6 chg 0002 evt 0000 [ 37.631821] hub 3-0:1.0: 2 ports detected [ 37.631823] hub 3-0:1.0: standalone hub [ 37.631824] hub 3-0:1.0: no power switching (usb 1.0) [ 37.631825] hub 3-0:1.0: individual port over-current protection [ 37.631826] hub 3-0:1.0: power on to power good time: 2ms [ 37.631838] hub 3-0:1.0: local power source is good [ 37.631839] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 37.631885] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 37.631987] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0 [ 37.632050] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 37.632062] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 37.632064] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 37.632072] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '004' [ 37.632082] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4 [ 37.721858] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 37.732062] uhci_hcd 0000:00:1a.2: detected 2 ports [ 37.737070] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 37.743894] uhci_hcd 0000:00:1a.2: Performing full reset [ 37.749340] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 37.755235] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000f0a0 [ 37.761170] usb usb4: default language 0x0409 [ 37.765668] usb usb4: udev 1, busnum 4, minor = 384 [ 37.770667] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 37.777575] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 37.784287] ehci_hcd 0000:00:1d.7: port 1 full speed --> companion [ 37.784291] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 37.784296] hub 2-0:1.0: port 1 not reset yet, waiting 50ms [ 37.806099] usb usb4: Product: UHCI Host Controller [ 37.811096] usb usb4: Manufacturer: Linux 2.6.37-rc8-dt5+ uhci_hcd [ 37.817397] usb usb4: SerialNumber: 0000:00:1a.2 [ 37.822341] usb usb4: usb_probe_device [ 37.826213] usb usb4: configuration #1 chosen from 1 choice [ 37.831914] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 37.837909] hub 4-0:1.0: usb_probe_interface [ 37.840033] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 37.840080] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 37.840083] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0002 [ 37.862474] hub 4-0:1.0: usb_probe_interface - got id [ 37.867644] hub 4-0:1.0: USB hub found [ 37.871531] hub 4-0:1.0: 2 ports detected [ 37.875663] hub 4-0:1.0: standalone hub [ 37.879623] hub 4-0:1.0: no power switching (usb 1.0) [ 37.884795] hub 4-0:1.0: individual port over-current protection [ 37.890923] hub 4-0:1.0: power on to power good time: 2ms [ 37.896454] hub 4-0:1.0: local power source is good [ 37.901455] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 37.908491] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 37.916258] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2 [ 37.922443] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 37.929708] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 37.935664] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 37.941015] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '005' [ 37.948693] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 37.972029] uhci_hcd 0000:00:1d.0: detected 2 ports [ 37.977041] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 37.983866] uhci_hcd 0000:00:1d.0: Performing full reset [ 37.989314] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 37.995196] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080 [ 38.001122] usb usb5: default language 0x0409 [ 38.005621] usb usb5: udev 1, busnum 5, minor = 512 [ 38.010624] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 38.017537] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 38.024946] usb usb5: Product: UHCI Host Controller [ 38.029945] usb usb5: Manufacturer: Linux 2.6.37-rc8-dt5+ uhci_hcd [ 38.036247] usb usb5: SerialNumber: 0000:00:1d.0 [ 38.041020] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 38.041185] usb usb5: usb_probe_device [ 38.041187] usb usb5: configuration #1 chosen from 1 choice [ 38.041198] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 38.041303] hub 5-0:1.0: usb_probe_interface [ 38.041305] hub 5-0:1.0: usb_probe_interface - got id [ 38.041306] hub 5-0:1.0: USB hub found [ 38.041316] hub 5-0:1.0: 2 ports detected [ 38.041317] hub 5-0:1.0: standalone hub [ 38.041318] hub 5-0:1.0: no power switching (usb 1.0) [ 38.041319] hub 5-0:1.0: individual port over-current protection [ 38.041320] hub 5-0:1.0: power on to power good time: 2ms [ 38.041332] hub 5-0:1.0: local power source is good [ 38.041333] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 38.041377] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 38.041485] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 [ 38.041529] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 38.041541] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 38.041544] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 38.041551] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '006' [ 38.041561] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 38.140034] uhci_hcd 0000:00:1d.0: port 1 portsc 009b,00 [ 38.140043] hub 5-0:1.0: port 1: status 0101 change 0003 [ 38.204026] uhci_hcd 0000:00:1d.1: detected 2 ports [ 38.209036] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 38.215861] uhci_hcd 0000:00:1d.1: Performing full reset [ 38.221308] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 38.227180] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060 [ 38.233108] usb usb6: default language 0x0409 [ 38.237609] usb usb6: udev 1, busnum 6, minor = 640 [ 38.242609] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 38.249522] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 38.256933] usb usb6: Product: UHCI Host Controller [ 38.261932] usb usb6: Manufacturer: Linux 2.6.37-rc8-dt5+ uhci_hcd [ 38.268234] usb usb6: SerialNumber: 0000:00:1d.1 [ 38.272995] hub 5-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 38.273160] usb usb6: usb_probe_device [ 38.273162] usb usb6: configuration #1 chosen from 1 choice [ 38.273173] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 38.273290] hub 6-0:1.0: usb_probe_interface [ 38.273291] hub 6-0:1.0: usb_probe_interface - got id [ 38.273292] hub 6-0:1.0: USB hub found [ 38.273305] hub 6-0:1.0: 2 ports detected [ 38.273306] hub 6-0:1.0: standalone hub [ 38.273307] hub 6-0:1.0: no power switching (usb 1.0) [ 38.273308] hub 6-0:1.0: individual port over-current protection [ 38.273310] hub 6-0:1.0: power on to power good time: 2ms [ 38.273320] hub 6-0:1.0: local power source is good [ 38.273322] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 38.273366] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 38.273479] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 [ 38.273523] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 38.273531] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 38.273533] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 38.273541] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '007' [ 38.273547] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 38.391858] hub 5-0:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 38.408026] uhci_hcd 0000:00:1d.2: detected 2 ports [ 38.413039] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 38.419864] uhci_hcd 0000:00:1d.2: Performing full reset [ 38.425311] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 38.431185] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040 [ 38.437108] usb usb7: default language 0x0409 [ 38.441602] usb usb7: udev 1, busnum 7, minor = 768 [ 38.446602] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 38.453510] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 38.460919] usb usb7: Product: UHCI Host Controller [ 38.465920] usb usb7: Manufacturer: Linux 2.6.37-rc8-dt5+ uhci_hcd [ 38.472221] usb usb7: SerialNumber: 0000:00:1d.2 [ 38.477163] usb usb7: usb_probe_device [ 38.481037] usb usb7: configuration #1 chosen from 1 choice [ 38.486741] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 38.492741] hub 7-0:1.0: usb_probe_interface [ 38.497139] hub 7-0:1.0: usb_probe_interface - got id [ 38.502311] hub 7-0:1.0: USB hub found [ 38.506193] hub 7-0:1.0: 2 ports detected [ 38.510330] hub 7-0:1.0: standalone hub [ 38.512032] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 38.521362] hub 7-0:1.0: no power switching (usb 1.0) [ 38.526535] hub 7-0:1.0: individual port over-current protection [ 38.532664] hub 7-0:1.0: power on to power good time: 2ms [ 38.538196] hub 7-0:1.0: local power source is good [ 38.543193] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 38.550234] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 38.558022] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 [ 38.564302] Initializing USB Mass Storage driver... [ 38.569438] usbcore: registered new interface driver usb-storage [ 38.575570] USB Mass Storage support registered. [ 38.580466] usbcore: registered new interface driver libusual [ 38.586446] usbcore: registered new interface driver ums-alauda [ 38.592643] usbcore: registered new interface driver ums-cypress [ 38.600477] usbcore: registered new interface driver ums-datafab [ 38.606717] usbcore: registered new interface driver ums-freecom [ 38.612956] usbcore: registered new interface driver ums-isd200 [ 38.619109] usbcore: registered new interface driver ums-jumpshot [ 38.625436] usbcore: registered new interface driver ums-karma [ 38.631501] usbcore: registered new interface driver ums-onetouch [ 38.637821] usbcore: registered new interface driver ums-sddr09 [ 38.643963] usbcore: registered new interface driver ums-sddr55 [ 38.644039] usb 5-1: ep0 maxpacket = 8 [ 38.654003] usbcore: registered new interface driver ums-usbat [ 38.660262] usbcore: registered new interface driver usbserial [ 38.661116] usb 5-1: udev 2, busnum 5, minor = 513 [ 38.661118] usb 5-1: New USB device found, idVendor=0557, idProduct=8021 [ 38.661120] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 38.661295] usb 5-1: usb_probe_device [ 38.661298] usb 5-1: configuration #1 chosen from 1 choice [ 38.664115] usb 5-1: adding 5-1:1.0 (config #1, interface 0) [ 38.664242] hub 5-1:1.0: usb_probe_interface [ 38.664244] hub 5-1:1.0: usb_probe_interface - got id [ 38.664245] hub 5-1:1.0: USB hub found [ 38.666122] hub 5-1:1.0: 4 ports detected [ 38.666123] hub 5-1:1.0: standalone hub [ 38.666124] hub 5-1:1.0: individual port power switching [ 38.666125] hub 5-1:1.0: individual port over-current protection [ 38.666127] hub 5-1:1.0: power on to power good time: 100ms [ 38.668117] hub 5-1:1.0: local power source is good [ 38.668119] hub 5-1:1.0: enabling power on all ports [ 38.672140] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '002' [ 38.672177] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 38.672179] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 38.768110] USB Serial support registered for generic [ 38.773118] hub 5-1:1.0: port 1: status 0301 change 0001 [ 38.778830] usbcore: registered new interface driver usbserial_generic [ 38.785477] usbserial: USB Serial Driver core [ 38.790058] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter [ 38.798635] usbcore: registered new interface driver belkin [ 38.804328] belkin_sa: v1.3:USB Belkin Serial converter driver [ 38.810405] USB Serial support registered for MCT U232 [ 38.815772] usbcore: registered new interface driver mct_u232 [ 38.821641] mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver [ 38.840022] usb usb3: suspend_rh (auto-stop) [ 38.856264] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 38.866358] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 38.871470] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 38.876665] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 128, phase 0, 12 us [ 38.884699] hub 5-1:1.0: state 7 ports 4 chg 0002 evt 0000 [ 38.885098] mice: PS/2 mouse device common for all mice [ 38.886128] rtc_cmos 00:08: RTC can wake from S4 [ 38.902131] hub 5-1:1.0: port 1, status 0301, change 0000, 1.5 Mb/s [ 38.928262] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 38.934513] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 38.941431] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 38.947448] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0460) [ 38.954712] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 38.960848] iTCO_vendor_support: vendor-support=0 [ 38.965672] SoftDog: cannot register miscdev on minor=130 (err=-16) [ 38.972069] md: linear personality registered for level -1 [ 38.977676] md: raid0 personality registered for level 0 [ 38.981113] usb 5-1.1: new low speed USB device using uhci_hcd and address 3 [ 38.990269] md: raid1 personality registered for level 1 [ 38.995702] md: raid10 personality registered for level 10 [ 39.001308] md: raid6 personality registered for level 6 [ 39.006744] md: raid5 personality registered for level 5 [ 39.012177] md: raid4 personality registered for level 4 [ 39.017612] md: multipath personality registered for level -4 [ 39.023480] md: faulty personality registered for level -5 [ 39.029422] device-mapper: uevent: version 1.0.3 [ 39.034528] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com [ 39.043519] device-mapper: multipath: version 1.1.1 loaded [ 39.049144] device-mapper: multipath round-robin: version 1.0.0 loaded [ 39.055799] device-mapper: multipath queue-length: version 0.1.0 loaded [ 39.062539] device-mapper: multipath service-time: version 0.2.0 loaded [ 39.069655] device-mapper: dm-log-userspace: version 1.0.0 loaded [ 39.085331] cpuidle: using governor ladder [ 39.089561] usb usb4: suspend_rh (auto-stop) [ 39.112953] cpuidle: using governor menu [ 39.117001] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 39.123074] ioatdma 0000:00:16.0: can't derive routing for PCI INT A [ 39.123172] usb 5-1.1: skipped 1 descriptor after interface [ 39.123175] usb 5-1.1: skipped 1 descriptor after interface [ 39.123177] usb 5-1.1: skipped 1 descriptor after interface [ 39.129165] usb 5-1.1: default language 0x0409 [ 39.151200] ioatdma 0000:00:16.0: PCI INT A: no GSI [ 39.156309] ioatdma 0000:00:16.0: setting latency timer to 64 [ 39.159170] usb 5-1.1: udev 3, busnum 5, minor = 514 [ 39.159173] usb 5-1.1: New USB device found, idVendor=0557, idProduct=2261 [ 39.159175] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 39.159176] usb 5-1.1: Product: CS1716A V1.0.098 [ 39.159178] usb 5-1.1: Manufacturer: ATEN International Co. Ltd [ 39.159421] usb 5-1.1: usb_probe_device [ 39.159423] usb 5-1.1: configuration #1 chosen from 1 choice [ 39.164175] usb 5-1.1: adding 5-1.1:1.0 (config #1, interface 0) [ 39.164390] usbserial_generic 5-1.1:1.0: usb_probe_interface [ 39.164392] usbserial_generic 5-1.1:1.0: usb_probe_interface - got id [ 39.164454] usb 5-1.1: adding 5-1.1:1.1 (config #1, interface 1) [ 39.164664] usbserial_generic 5-1.1:1.1: usb_probe_interface [ 39.164666] usbserial_generic 5-1.1:1.1: usb_probe_interface - got id [ 39.164726] usb 5-1.1: adding 5-1.1:1.2 (config #1, interface 2) [ 39.164930] usbserial_generic 5-1.1:1.2: usb_probe_interface [ 39.164932] usbserial_generic 5-1.1:1.2: usb_probe_interface - got id [ 39.164982] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '003' [ 39.165018] hub 5-1:1.0: state 7 ports 4 chg 0000 evt 0002 [ 39.270956] ioatdma 0000:00:16.0: irq 138 for MSI/MSI-X [ 39.277371] igb 0000:01:00.0: DCA enabled [ 39.281635] igb 0000:01:00.1: DCA enabled [ 39.285805] ioatdma 0000:00:16.1: can't derive routing for PCI INT B [ 39.292284] ioatdma 0000:00:16.1: PCI INT B: no GSI [ 39.297387] ioatdma 0000:00:16.1: setting latency timer to 64 [ 39.303394] ioatdma 0000:00:16.1: irq 139 for MSI/MSI-X [ 39.309533] ioatdma 0000:00:16.2: can't derive routing for PCI INT C [ 39.316016] ioatdma 0000:00:16.2: PCI INT C: no GSI [ 39.321117] ioatdma 0000:00:16.2: setting latency timer to 64 [ 39.327126] ioatdma 0000:00:16.2: irq 140 for MSI/MSI-X [ 39.333244] ioatdma 0000:00:16.3: can't derive routing for PCI INT D [ 39.339733] usb usb6: suspend_rh (auto-stop) [ 39.344155] ioatdma 0000:00:16.3: PCI INT D: no GSI [ 39.349255] ioatdma 0000:00:16.3: setting latency timer to 64 [ 39.355265] ioatdma 0000:00:16.3: irq 141 for MSI/MSI-X [ 39.361406] ioatdma 0000:00:16.4: can't derive routing for PCI INT A [ 39.367884] ioatdma 0000:00:16.4: PCI INT A: no GSI [ 39.372988] ioatdma 0000:00:16.4: setting latency timer to 64 [ 39.378992] ioatdma 0000:00:16.4: irq 142 for MSI/MSI-X [ 39.385114] ioatdma 0000:00:16.5: can't derive routing for PCI INT B [ 39.391597] ioatdma 0000:00:16.5: PCI INT B: no GSI [ 39.396697] ioatdma 0000:00:16.5: setting latency timer to 64 [ 39.402706] ioatdma 0000:00:16.5: irq 143 for MSI/MSI-X [ 39.408837] ioatdma 0000:00:16.6: can't derive routing for PCI INT C [ 39.415316] ioatdma 0000:00:16.6: PCI INT C: no GSI [ 39.420418] ioatdma 0000:00:16.6: setting latency timer to 64 [ 39.426421] ioatdma 0000:00:16.6: irq 144 for MSI/MSI-X [ 39.432550] ioatdma 0000:00:16.7: can't derive routing for PCI INT D [ 39.439027] ioatdma 0000:00:16.7: PCI INT D: no GSI [ 39.444128] ioatdma 0000:00:16.7: setting latency timer to 64 [ 39.450138] ioatdma 0000:00:16.7: irq 145 for MSI/MSI-X [ 39.456725] usbhid 5-1.1:1.0: usb_probe_interface [ 39.461551] usbhid 5-1.1:1.0: usb_probe_interface - got id [ 39.520242] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input3 [ 39.532728] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 8, phase 4, 118 us [ 39.540864] generic-usb 0003:0557:2261.0001: input: USB HID v1.00 Keyboard [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-1.1/input0 [ 39.554626] usbhid 5-1.1:1.1: usb_probe_interface [ 39.559451] usbhid 5-1.1:1.1: usb_probe_interface - got id [ 39.584031] usb usb7: suspend_rh (auto-stop) [ 39.600540] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.1/input/input4 [ 39.613003] uhci_hcd 0000:00:1d.0: reserve dev 3 ep82-INT, period 8, phase 4, 118 us [ 39.621299] generic-usb 0003:0557:2261.0002: input: USB HID v1.00 Device [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-1.1/input1 [ 39.634891] usbhid 5-1.1:1.2: usb_probe_interface [ 39.639720] usbhid 5-1.1:1.2: usb_probe_interface - got id [ 39.667467] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.2/input/input5 [ 39.680456] generic-usb 0003:0557:2261.0003: input: USB HID v1.10 Mouse [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-1.1/input2 [ 39.694155] usbcore: registered new interface driver usbhid [ 39.699852] usbhid: USB HID core driver [ 39.704681] dell-wmi: No known WMI GUID found [ 39.709166] acer-wmi: Acer Laptop ACPI-WMI Extras [ 39.713995] acer-wmi: No or unsupported WMI interface, unable to load [ 39.721281] ALSA device list: [ 39.724376] No soundcards found. [ 39.728137] oprofile: using NMI interrupt. [ 39.733346] netem: version 1.2 [ 39.736527] Netfilter messages via NETLINK v0.30. [ 39.741397] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 39.750052] ctnetlink v0.93: registering with nfnetlink. [ 39.755538] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 39.762620] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 39.770108] xt_time: kernel timezone is -0000 [ 39.777863] ip_tables: (C) 2000-2006 Netfilter Core Team [ 39.783470] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [ 39.790001] arp_tables: (C) 2002 David S. Miller [ 39.794811] TCP bic registered [ 39.797991] TCP cubic registered [ 39.801343] TCP westwood registered [ 39.804958] TCP highspeed registered [ 39.808656] TCP hybla registered [ 39.811989] TCP htcp registered [ 39.815261] TCP vegas registered [ 39.818616] TCP veno registered [ 39.821873] TCP scalable registered [ 39.825479] TCP lp registered [ 39.828563] TCP yeah registered [ 39.831818] TCP illinois registered [ 39.835444] Initializing XFRM netlink socket [ 39.839851] NET: Registered protocol family 17 [ 39.844433] NET: Registered protocol family 15 [ 39.850062] Bridge firewalling registered [ 39.854213] Ebtables v2.0 registered [ 39.879648] PM: Hibernation image not present or could not be loaded. [ 39.886266] registered taskstats version 1 [ 39.891410] Magic number: 6:353:478 [ 39.895201] rtc rtc0: hash matches [ 39.899868] rtc_cmos 00:08: setting system clock to 2010-12-31 10:29:18 UTC (1293791358) [ 41.416100] IP-Config: Complete: [ 41.419205] device=eth0, addr=192.168.1.69, mask=255.255.255.0, gw=192.168.1.1, [ 41.427363] host=lkp-ws02, domain=, nis-domain=(none), [ 41.433161] bootserver=192.168.1.11, rootserver=192.168.1.11, rootpath= [ 41.441249] md: Waiting for all devices to be available before autodetect [ 41.448178] md: If you don't use raid, use raid=noautodetect [ 41.454748] md: Autodetecting RAID arrays. [ 41.458976] md: Scanned 0 and added 0 devices. [ 41.463582] md: autorun ... [ 41.466543] md: ... autorun DONE. [ 41.478768] VFS: Mounted root (nfs filesystem) on device 0:15. [ 41.484811] debug: unmapping init memory ffffffff81fd9000..ffffffff82298000 [ 42.232390] stty used greatest stack depth: 3184 bytes left [ 42.785938] create_static_n used greatest stack depth: 3120 bytes left [ 43.395655] edd_id used greatest stack depth: 2912 bytes left [ 44.470089] sshd (3256): /proc/3256/oom_adj is deprecated, please use /proc/3256/oom_score_adj instead. [ 48.144750] EXT4-fs (sda1): recovery complete [ 48.149412] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 48.467851] rc used greatest stack depth: 2896 bytes left [ 51.257659] XFS mounting filesystem sdc1 [ 51.374265] Ending clean XFS mount for filesystem: sdc1 [ 54.290330] XFS mounting filesystem sdd1 [ 54.404378] Ending clean XFS mount for filesystem: sdd1 [ 57.322237] XFS mounting filesystem sde1 [ 57.431686] Ending clean XFS mount for filesystem: sde1 [ 60.376505] XFS mounting filesystem sdf1 [ 60.501981] Ending clean XFS mount for filesystem: sdf1 [ 63.402614] XFS mounting filesystem sdg1 [ 63.531528] Ending clean XFS mount for filesystem: sdg1 [ 66.474815] XFS mounting filesystem sdh1 [ 66.579009] Ending clean XFS mount for filesystem: sdh1 [ 69.459482] XFS mounting filesystem sdi1 [ 69.580021] Ending clean XFS mount for filesystem: sdi1 [ 72.013684] XFS mounting filesystem sdj1 [ 72.080455] Ending clean XFS mount for filesystem: sdj1 [ 74.557799] XFS mounting filesystem sdk1 [ 74.630855] Ending clean XFS mount for filesystem: sdk1 [ 77.086013] XFS mounting filesystem sdl1 [ 77.150357] Ending clean XFS mount for filesystem: sdl1