[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.37-rc8-dt5+ (wfg@bee) (gcc version 4.5.0 (GCC) ) #395 SMP Fri Dec 31 09:08:10 CST 2010 [ 0.000000] Command line: run=/home/wfg/ioless-balance_dirty_pages/test-each-fs.sh debug sched_debug apic=debug panic=10 hung_task_panic=1 softlockup_panic=1 unknown_nmi_panic=1 nmi_watchdog=panic,lapic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 netconsole=@:/eth0,6666@192.168.1.11/00:30:48:fe:19:95 ip=192.168.1.69:192.168.1.11:192.168.1.1:255.255.255.0:lkp-ws02:eth0:none nfsroot=192.168.1.11:/nfsroot/wfg,tcp,v3,rsize=524288,wsize=524288 rw BOOT_IMAGE=x86_64/vmlinuz [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable) [ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf30b000 (usable) [ 0.000000] BIOS-e820: 00000000bf30b000 - 00000000bf38b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf38b000 - 00000000bf3a1000 (reserved) [ 0.000000] BIOS-e820: 00000000bf3a1000 - 00000000bf3a2000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf3a2000 - 00000000bf3b3000 (reserved) [ 0.000000] BIOS-e820: 00000000bf3b3000 - 00000000bf3b6000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf3b6000 - 00000000bf3dd000 (reserved) [ 0.000000] BIOS-e820: 00000000bf3dd000 - 00000000bf3de000 (usable) [ 0.000000] BIOS-e820: 00000000bf3de000 - 00000000bf3df000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf3df000 - 00000000bf414000 (reserved) [ 0.000000] BIOS-e820: 00000000bf414000 - 00000000bf416000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf416000 - 00000000bf418000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf418000 - 00000000bf420000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf420000 - 00000000bf421000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf421000 - 00000000bf423000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf423000 - 00000000bf42b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf42b000 - 00000000bf454000 (reserved) [ 0.000000] BIOS-e820: 00000000bf454000 - 00000000bf657000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf657000 - 00000000bf800000 (usable) [ 0.000000] BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000440000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: X8DTN/X8DTN, BIOS 4.6.3 01/06/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x440000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FC00000000 write-back [ 0.000000] 1 base 0400000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFC0000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes. [ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes. [ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [ffff8800000fcf20] fcf20 [ 0.000000] mpc: fc9f0-fcea4 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000 [ 0.000000] 0000000000 - 00bf800000 page 4k [ 0.000000] kernel direct mapping tables up to bf800000 @ 1fa00000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000440000000 [ 0.000000] 0100000000 - 0440000000 page 4k [ 0.000000] kernel direct mapping tables up to 440000000 @ bd0f9000-bf30b000 [ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 A M I) [ 0.000000] ACPI: XSDT 00000000bf421e18 0008C (v01 A M I ALASKA 01072009 MSFT 00010013) [ 0.000000] ACPI: FACP 00000000bf41fd98 000F4 (v04 A M I ALASKA 01072009 MSFT 00010013) [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20101013/tbfadt-369) [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBF420F40/0x00000000BF420E40, using 32 (20101013/tbfadt-486) [ 0.000000] ACPI: DSDT 00000000bf418018 06059 (v01 A M I ALASKA 00000001 INTL 20051117) [ 0.000000] ACPI: FACS 00000000bf420f40 00040 [ 0.000000] ACPI: APIC 00000000bf41fc18 00130 (v02 A M I ALASKA 01072009 MSFT 00010013) [ 0.000000] ACPI: SSDT 00000000bf415798 006EE (v01 AMICPU PROC 00000001 MSFT 03000001) [ 0.000000] ACPI: MCFG 00000000bf422f18 0003C (v01 A M I OEMMCFG 01072009 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000bf414c98 00228 (v01 A M I AMI SRAT 00000001 AMI. 00000000) [ 0.000000] ACPI: SLIT 00000000bf422e98 00030 (v01 A M I AMI SLIT 00000000 AMI. 00000000) [ 0.000000] ACPI: HPET 00000000bf422e18 00038 (v01 A M I ICH7HPET 01072009 AMI. 00000003) [ 0.000000] ACPI: SPMI 00000000bf422d98 00040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.000000] ACPI: EINJ 00000000bf41fa98 00130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.000000] ACPI: ERST 00000000bf414a18 00210 (v01 AMIER AMI ERST 00000000 00000000) [ 0.000000] ACPI: HEST 00000000bf414f18 000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.000000] ACPI: BERT 00000000bf422d18 00030 (v01 AMI AMI BERT 00000000 00000000) [ 0.000000] ACPI: DMAR 00000000bf415f18 000D4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x12 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x13 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x14 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x15 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x20 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x21 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x22 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x23 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x24 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x25 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x30 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x31 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x32 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x33 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x34 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x35 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 0-c0000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-240000000 [ 0.000000] SRAT: Node 1 PXM 1 240000000-440000000 [ 0.000000] SRAT: Node 0 [0,c0000000) + [100000000,240000000) -> [0,240000000) [ 0.000000] NUMA: Using 30 for the hash shift. [ 0.000000] Initmem setup node 0 0000000000000000-0000000240000000 [ 0.000000] NODE_DATA [000000023fffb000 - 000000023fffffff] [ 0.000000] Initmem setup node 1 0000000240000000-0000000440000000 [ 0.000000] NODE_DATA [000000043fffa000 - 000000043fffefff] [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237e00000-ffff88023edfffff] on node 0 [ 0.000000] [ffffea0007e00000-ffffea000edfffff] PMD -> [ffff880437e00000-ffff88043edfffff] on node 1 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00440000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009c [ 0.000000] 0: 0x00000100 -> 0x000bf30b [ 0.000000] 0: 0x000bf3dd -> 0x000bf3de [ 0.000000] 0: 0x000bf657 -> 0x000bf800 [ 0.000000] 0: 0x00100000 -> 0x00240000 [ 0.000000] 1: 0x00240000 -> 0x00440000 [ 0.000000] On node 0 totalpages: 2094145 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3918 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 765165 pages, LIFO batch:31 [ 0.000000] Normal zone: 17920 pages used for memmap [ 0.000000] Normal zone: 1292800 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 2097152 [ 0.000000] Normal zone: 28672 pages used for memmap [ 0.000000] Normal zone: 2068480 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x20] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x22] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x24] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x30] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x32] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x34] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x21] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x23] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x31] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x33] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x35] enabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec02000] gsi_base[48]) [ 0.000000] IOAPIC[2]: apic_id 3, version 32, address 0xfec02000, GSI 48-71 [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec90000] gsi_base[72]) [ 0.000000] IOAPIC[3]: apic_id 4, version 32, address 0xfec90000, GSI 72-95 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 24 CPUs, 0 hotplug CPUs [ 0.000000] mapped APIC to ffffffffff5fc000 (fee00000) [ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000) [ 0.000000] mapped IOAPIC to ffffffffff5fa000 (fec01000) [ 0.000000] mapped IOAPIC to ffffffffff5f9000 (fec02000) [ 0.000000] mapped IOAPIC to ffffffffff5f8000 (fec90000) [ 0.000000] nr_irqs_gsi: 112 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf30b000 - 00000000bf38b000 [ 0.000000] PM: Registered nosave memory: 00000000bf38b000 - 00000000bf3a1000 [ 0.000000] PM: Registered nosave memory: 00000000bf3a1000 - 00000000bf3a2000 [ 0.000000] PM: Registered nosave memory: 00000000bf3a2000 - 00000000bf3b3000 [ 0.000000] PM: Registered nosave memory: 00000000bf3b3000 - 00000000bf3b6000 [ 0.000000] PM: Registered nosave memory: 00000000bf3b6000 - 00000000bf3dd000 [ 0.000000] PM: Registered nosave memory: 00000000bf3de000 - 00000000bf3df000 [ 0.000000] PM: Registered nosave memory: 00000000bf3df000 - 00000000bf414000 [ 0.000000] PM: Registered nosave memory: 00000000bf414000 - 00000000bf416000 [ 0.000000] PM: Registered nosave memory: 00000000bf416000 - 00000000bf418000 [ 0.000000] PM: Registered nosave memory: 00000000bf418000 - 00000000bf420000 [ 0.000000] PM: Registered nosave memory: 00000000bf420000 - 00000000bf421000 [ 0.000000] PM: Registered nosave memory: 00000000bf421000 - 00000000bf423000 [ 0.000000] PM: Registered nosave memory: 00000000bf423000 - 00000000bf42b000 [ 0.000000] PM: Registered nosave memory: 00000000bf42b000 - 00000000bf454000 [ 0.000000] PM: Registered nosave memory: 00000000bf454000 - 00000000bf657000 [ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ed1c000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:24 nr_node_ids:2 [ 0.000000] PERCPU: Embedded 475 pages/cpu @ffff8800bb800000 s1916096 r8192 d21312 u2097152 [ 0.000000] pcpu-alloc: s1916096 r8192 d21312 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 12 [0] 13 [ 0.000000] pcpu-alloc: [0] 14 [0] 15 [0] 16 [0] 17 [1] 06 [1] 07 [1] 08 [1] 09 [ 0.000000] pcpu-alloc: [1] 10 [1] 11 [1] 18 [1] 19 [1] 20 [1] 21 [1] 22 [1] 23 [ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 4130363 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: run=/home/wfg/ioless-balance_dirty_pages/test-each-fs.sh debug sched_debug apic=debug panic=10 hung_task_panic=1 softlockup_panic=1 unknown_nmi_panic=1 nmi_watchdog=panic,lapic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 netconsole=@:/eth0,6666@192.168.1.11/00:30:48:fe:19:95 ip=192.168.1.69:192.168.1.11:192.168.1.1:255.255.255.0:lkp-ws02:eth0:none nfsroot=192.168.1.11:/nfsroot/wfg,tcp,v3,rsize=524288,wsize=524288 rw BOOT_IMAGE=x86_64/vmlinuz [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 16361144k/17825792k available (10752k kernel code, 1060604k absent, 404044k reserved, 5468k data, 2812k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:2096 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 6335 kB [ 0.000000] per task-struct memory footprint: 2688 bytes [ 0.000000] allocated 167772160 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] ODEBUG: 31 of 31 active objects replaced [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 2800.618 MHz processor. [ 0.000015] Calibrating delay loop (skipped), value calculated using timer frequency.. 5601.23 BogoMIPS (lpj=11202472) [ 0.010960] pid_max: default: 32768 minimum: 301 [ 0.019927] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.032806] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.041786] Mount-cache hash table entries: 256 [ 0.047057] Initializing cgroup subsys debug [ 0.051446] Initializing cgroup subsys ns [ 0.055577] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.064625] Initializing cgroup subsys cpuacct [ 0.069192] Initializing cgroup subsys memory [ 0.073708] Initializing cgroup subsys devices [ 0.078268] Initializing cgroup subsys freezer [ 0.082825] Initializing cgroup subsys blkio [ 0.087316] CPU: Physical Processor ID: 0 [ 0.091441] CPU: Processor Core ID: 0 [ 0.095222] mce: CPU supports 9 MCE banks [ 0.099357] CPU0: Thermal monitoring enabled (TM1) [ 0.104282] using mwait in idle threads. [ 0.108325] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver. [ 0.115930] ... version: 3 [ 0.120054] ... bit width: 48 [ 0.124266] ... generic registers: 4 [ 0.128391] ... value mask: 0000ffffffffffff [ 0.133816] ... max period: 000000007fffffff [ 0.139240] ... fixed-purpose events: 3 [ 0.143366] ... event mask: 000000070000000f [ 0.149883] ACPI: Core revision 20101013 [ 0.175977] ftrace: allocating 33698 entries in 133 pages [ 0.190836] Getting VERSION: 1060015 [ 0.194534] Getting VERSION: 1060015 [ 0.198224] Getting ID: 0 [ 0.200967] Getting ID: 0 [ 0.203699] Setting APIC routing to physical flat [ 0.208519] enabled ExtINT on CPU#0 [ 0.212562] ESR value before enabling vector: 0x00000040 after: 0x00000000 [ 0.219633] ENABLING IO-APIC IRQs [ 0.223067] init IO_APIC IRQs [ 0.226155] 0-0 (apicid-pin) not connected [ 0.230533] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 0.238021] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) [ 0.245512] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) [ 0.252995] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) [ 0.260478] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) [ 0.267960] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) [ 0.275443] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) [ 0.282930] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 0.290416] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0) [ 0.297898] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) [ 0.305554] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) [ 0.313208] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 0.320864] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 0.328519] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) [ 0.336174] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) [ 0.343829] 0-16 0-17 0-18 0-19 0-20 0-21 0-22 0-23 2-0 2-1 2-2 2-3 2-4 2-5 2-6 2-7 2-8 2-9 2-10 2-11 2-12 2-13 2-14 2-15 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 3-0 3-1 3-2 3-3 3-4 3-5 3-6 3-7 3-8 3-9 3-10 3-11 3-12 3-13 3-14 3-15 3-16 3-17 3-18 3-19 3-20 3-21 3-22 3-23 4-0 4-1 4-2 4-3 4-4 4-5 4-6 4-7 4-8 4-9 4-10 4-11 4-12 4-13 4-14 4-15 4-16 4-17 4-18 4-19 4-20 4-21 4-22 4-23 (apicid-pin) not connected [ 0.385493] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.431223] CPU0: Intel(R) Xeon(R) CPU X5660 @ 2.80GHz stepping 01 [ 0.438599] Using local APIC timer interrupts. [ 0.438600] calibrating APIC timer ... [ 0.551694] ... lapic delta = 833352 [ 0.555374] ... PM-Timer delta = 357950 [ 0.559319] ... PM-Timer result ok [ 0.562833] ..... delta 833352 [ 0.565999] ..... mult: 35789958 [ 0.569336] ..... calibration result: 533345 [ 0.573714] ..... CPU clock speed is 2800.0236 MHz. [ 0.578697] ..... host bus clock speed is 133.1345 MHz. [ 0.584703] lockdep: fixing up alternatives. [ 0.589185] Booting Node 0, Processors #1masked ExtINT on CPU#1 [ 0.704295] lockdep: fixing up alternatives. [ 0.708777] #2masked ExtINT on CPU#2 [ 0.820103] lockdep: fixing up alternatives. [ 0.824519] #3masked ExtINT on CPU#3 [ 0.935845] lockdep: fixing up alternatives. [ 0.940270] #4masked ExtINT on CPU#4 [ 1.051580] lockdep: fixing up alternatives. [ 1.056000] #5masked ExtINT on CPU#5 [ 1.167674] lockdep: fixing up alternatives. [ 1.172099] Ok. [ 1.174052] Booting Node 1, Processors #6masked ExtINT on CPU#6 [ 1.290740] TSC synchronization [CPU#0 -> CPU#6]: [ 1.295621] Measured 896 cycles TSC warp between CPUs, turning off TSC clock. [ 0.012000] Marking TSC unstable due to check_tsc_sync_source failed [ 0.980645] lockdep: fixing up alternatives. [ 0.984035] #7masked ExtINT on CPU#7 [ 1.080751] lockdep: fixing up alternatives. [ 1.084032] #8masked ExtINT on CPU#8 [ 1.176721] lockdep: fixing up alternatives. [ 1.180036] #9masked ExtINT on CPU#9 [ 1.272704] lockdep: fixing up alternatives. [ 1.276036] #10masked ExtINT on CPU#10 [ 1.372663] lockdep: fixing up alternatives. [ 1.376035] #11masked ExtINT on CPU#11 [ 1.472490] lockdep: fixing up alternatives. [ 1.476035] Ok. [ 1.477986] Booting Node 0, Processors #12masked ExtINT on CPU#12 [ 1.576423] lockdep: fixing up alternatives. [ 1.580038] #13masked ExtINT on CPU#13 [ 1.672420] lockdep: fixing up alternatives. [ 1.676034] #14masked ExtINT on CPU#14 [ 1.768234] lockdep: fixing up alternatives. [ 1.772036] #15masked ExtINT on CPU#15 [ 1.864435] lockdep: fixing up alternatives. [ 1.868039] #16masked ExtINT on CPU#16 [ 1.960484] lockdep: fixing up alternatives. [ 1.964035] #17masked ExtINT on CPU#17 [ 2.056570] lockdep: fixing up alternatives. [ 2.060039] Ok. [ 2.061987] Booting Node 1, Processors #18masked ExtINT on CPU#18 [ 2.160558] lockdep: fixing up alternatives. [ 2.164032] #19masked ExtINT on CPU#19 [ 2.256570] lockdep: fixing up alternatives. [ 2.260028] #20masked ExtINT on CPU#20 [ 2.352612] lockdep: fixing up alternatives. [ 2.356033] #21masked ExtINT on CPU#21 [ 2.448551] lockdep: fixing up alternatives. [ 2.452031] #22masked ExtINT on CPU#22 [ 2.544575] lockdep: fixing up alternatives. [ 2.548028] #23 Ok. [ 0.012000] masked ExtINT on CPU#23 [ 2.644133] Brought up 24 CPUs [ 2.647295] Total of 24 processors activated (134406.40 BogoMIPS). [ 2.648048] Testing NMI watchdog ... OK. [ 2.736264] CPU0 attaching sched-domain: [ 2.740004] domain 0: span 0,12 level SIBLING [ 2.744002] groups: 0 (cpu_power = 589) 12 (cpu_power = 589) [ 2.750257] domain 1: span 0-5,12-17 level MC [ 2.754299] groups: 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) [ 2.770576] domain 2: span 0-23 level NODE [ 2.776002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 2.784304] CPU1 attaching sched-domain: [ 2.788012] domain 0: span 1,13 level SIBLING [ 2.792002] groups: 1 (cpu_power = 589) 13 (cpu_power = 589) [ 2.798259] domain 1: span 0-5,12-17 level MC [ 2.804002] groups: 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) [ 2.820002] domain 2: span 0-23 level NODE [ 2.824002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 2.832303] CPU2 attaching sched-domain: [ 2.836003] domain 0: span 2,14 level SIBLING [ 2.840002] groups: 2 (cpu_power = 589) 14 (cpu_power = 589) [ 2.846249] domain 1: span 0-5,12-17 level MC [ 2.852002] groups: 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) [ 2.868002] domain 2: span 0-23 level NODE [ 2.872002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 2.880304] CPU3 attaching sched-domain: [ 2.884002] domain 0: span 3,15 level SIBLING [ 2.888002] groups: 3 (cpu_power = 589) 15 (cpu_power = 589) [ 2.894256] domain 1: span 0-5,12-17 level MC [ 2.900002] groups: 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) [ 2.916301] domain 2: span 0-23 level NODE [ 2.920002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 2.928304] CPU4 attaching sched-domain: [ 2.932002] domain 0: span 4,16 level SIBLING [ 2.936002] groups: 4 (cpu_power = 589) 16 (cpu_power = 589) [ 2.944002] domain 1: span 0-5,12-17 level MC [ 2.948002] groups: 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) [ 2.964301] domain 2: span 0-23 level NODE [ 2.968002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 2.976303] CPU5 attaching sched-domain: [ 2.980002] domain 0: span 5,17 level SIBLING [ 2.984002] groups: 5 (cpu_power = 589) 17 (cpu_power = 589) [ 2.992002] domain 1: span 0-5,12-17 level MC [ 2.996002] groups: 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) [ 3.012301] domain 2: span 0-23 level NODE [ 3.016002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.024303] CPU6 attaching sched-domain: [ 3.028002] domain 0: span 6,18 level SIBLING [ 3.032002] groups: 6 (cpu_power = 589) 18 (cpu_power = 589) [ 3.040301] domain 1: span 6-11,18-23 level MC [ 3.044002] groups: 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) [ 3.060301] domain 2: span 0-23 level NODE [ 3.064002] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.072304] CPU7 attaching sched-domain: [ 3.076002] domain 0: span 7,19 level SIBLING [ 3.082299] groups: 7 (cpu_power = 589) 19 (cpu_power = 589) [ 3.088301] domain 1: span 6-11,18-23 level MC [ 3.092002] groups: 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) [ 3.108304] domain 2: span 0-23 level NODE [ 3.114040] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.122085] CPU8 attaching sched-domain: [ 3.124002] domain 0: span 8,20 level SIBLING [ 3.130299] groups: 8 (cpu_power = 589) 20 (cpu_power = 589) [ 3.136301] domain 1: span 6-11,18-23 level MC [ 3.140002] groups: 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) [ 3.158083] domain 2: span 0-23 level NODE [ 3.162040] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.170078] CPU9 attaching sched-domain: [ 3.172002] domain 0: span 9,21 level SIBLING [ 3.178301] groups: 9 (cpu_power = 589) 21 (cpu_power = 589) [ 3.184302] domain 1: span 6-11,18-23 level MC [ 3.190387] groups: 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) [ 3.206574] domain 2: span 0-23 level NODE [ 3.210038] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.219012] CPU10 attaching sched-domain: [ 3.220002] domain 0: span 10,22 level SIBLING [ 3.228002] groups: 10 (cpu_power = 589) 22 (cpu_power = 589) [ 3.234257] domain 1: span 6-11,18-23 level MC [ 3.238385] groups: 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) [ 3.254576] domain 2: span 0-23 level NODE [ 3.260002] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.268005] CPU11 attaching sched-domain: [ 3.272002] domain 0: span 11,23 level SIBLING [ 3.276002] groups: 11 (cpu_power = 589) 23 (cpu_power = 589) [ 3.282256] domain 1: span 6-11,18-23 level MC [ 3.288002] groups: 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) [ 3.304002] domain 2: span 0-23 level NODE [ 3.308002] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.316304] CPU12 attaching sched-domain: [ 3.320002] domain 0: span 0,12 level SIBLING [ 3.324002] groups: 12 (cpu_power = 589) 0 (cpu_power = 589) [ 3.331787] domain 1: span 0-5,12-17 level MC [ 3.336002] groups: 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) [ 3.352301] domain 2: span 0-23 level NODE [ 3.356002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.364305] CPU13 attaching sched-domain: [ 3.368002] domain 0: span 1,13 level SIBLING [ 3.372002] groups: 13 (cpu_power = 589) 1 (cpu_power = 589) [ 3.380002] domain 1: span 0-5,12-17 level MC [ 3.384002] groups: 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) [ 3.400301] domain 2: span 0-23 level NODE [ 3.404002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.412303] CPU14 attaching sched-domain: [ 3.416002] domain 0: span 2,14 level SIBLING [ 3.420002] groups: 14 (cpu_power = 589) 2 (cpu_power = 589) [ 3.428301] domain 1: span 0-5,12-17 level MC [ 3.432002] groups: 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) [ 3.448301] domain 2: span 0-23 level NODE [ 3.452002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.460303] CPU15 attaching sched-domain: [ 3.464002] domain 0: span 3,15 level SIBLING [ 3.470300] groups: 15 (cpu_power = 589) 3 (cpu_power = 589) [ 3.476301] domain 1: span 0-5,12-17 level MC [ 3.480002] groups: 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) [ 3.496301] domain 2: span 0-23 level NODE [ 3.500002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.508306] CPU16 attaching sched-domain: [ 3.512003] domain 0: span 4,16 level SIBLING [ 3.518299] groups: 16 (cpu_power = 589) 4 (cpu_power = 589) [ 3.524304] domain 1: span 0-5,12-17 level MC [ 3.528002] groups: 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) [ 3.544301] domain 2: span 0-23 level NODE [ 3.550040] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.558085] CPU17 attaching sched-domain: [ 3.560002] domain 0: span 5,17 level SIBLING [ 3.566299] groups: 17 (cpu_power = 589) 5 (cpu_power = 589) [ 3.572301] domain 1: span 0-5,12-17 level MC [ 3.576002] groups: 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) [ 3.592302] domain 2: span 0-23 level NODE [ 3.598040] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.606088] CPU18 attaching sched-domain: [ 3.608002] domain 0: span 6,18 level SIBLING [ 3.612001] groups: 18 (cpu_power = 589) 6 (cpu_power = 589) [ 3.618170] domain 1: span 6-11,18-23 level MC [ 3.622384] groups: 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) [ 3.640002] domain 2: span 0-23 level NODE [ 3.644001] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.652306] CPU19 attaching sched-domain: [ 3.656002] domain 0: span 7,19 level SIBLING [ 3.660001] groups: 19 (cpu_power = 589) 7 (cpu_power = 589) [ 3.666172] domain 1: span 6-11,18-23 level MC [ 3.672002] groups: 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) [ 3.688301] domain 2: span 0-23 level NODE [ 3.692001] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.700304] CPU20 attaching sched-domain: [ 3.704002] domain 0: span 8,20 level SIBLING [ 3.708001] groups: 20 (cpu_power = 589) 8 (cpu_power = 589) [ 3.716002] domain 1: span 6-11,18-23 level MC [ 3.720002] groups: 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) [ 3.736301] domain 2: span 0-23 level NODE [ 3.740002] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.748304] CPU21 attaching sched-domain: [ 3.752002] domain 0: span 9,21 level SIBLING [ 3.758299] groups: 21 (cpu_power = 589) 9 (cpu_power = 589) [ 3.764301] domain 1: span 6-11,18-23 level MC [ 3.768002] groups: 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) [ 3.784301] domain 2: span 0-23 level NODE [ 3.790040] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.798085] CPU22 attaching sched-domain: [ 3.800002] domain 0: span 10,22 level SIBLING [ 3.806385] groups: 22 (cpu_power = 589) 10 (cpu_power = 589) [ 3.812301] domain 1: span 6-11,18-23 level MC [ 3.816002] groups: 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) [ 3.834082] domain 2: span 0-23 level NODE [ 3.838032] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.847013] CPU23 attaching sched-domain: [ 3.848002] domain 0: span 11,23 level SIBLING [ 3.854386] groups: 23 (cpu_power = 589) 11 (cpu_power = 589) [ 3.862255] domain 1: span 6-11,18-23 level MC [ 3.866387] groups: 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) [ 3.882664] domain 2: span 0-23 level NODE [ 3.886032] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.896628] kworker/u:0 used greatest stack depth: 6080 bytes left [ 3.903340] kworker/u:0 used greatest stack depth: 5400 bytes left [ 3.920202] xor: automatically using best checksumming function: generic_sse [ 3.944003] generic_sse: 10590.000 MB/sec [ 3.948004] xor: using function: generic_sse (10590.000 MB/sec) [ 3.952088] Time: 10:38:06 Date: 12/31/10 [ 3.956242] NET: Registered protocol family 16 [ 3.965279] ACPI: bus type pci registered [ 3.968146] dca service started, version 1.12.1 [ 3.972079] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) [ 3.976006] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820 [ 4.064949] PCI: Using configuration type 1 for base access [ 4.104143] bio: create slab at 0 [ 4.176010] raid6: int64x1 2305 MB/s [ 4.244017] raid6: int64x2 2895 MB/s [ 4.312008] raid6: int64x4 2269 MB/s [ 4.380024] raid6: int64x8 2254 MB/s [ 4.448013] raid6: sse2x1 6787 MB/s [ 4.516008] raid6: sse2x2 7945 MB/s [ 4.584003] raid6: sse2x4 8833 MB/s [ 4.587857] raid6: using algorithm sse2x4 (8833 MB/s) [ 4.594668] ACPI: EC: Look up EC in DSDT [ 4.600524] \_SB_:_OSC evaluation returned wrong type [ 4.604003] _OSC request data:1 6 [ 4.614600] ACPI: Executed 1 blocks of module-level executable AML code [ 4.692330] ACPI: SSDT 00000000bf416018 01494 (v01 AMI IST 00000001 MSFT 03000001) [ 4.700885] ACPI: Dynamic OEM Table Load: [ 4.704302] ACPI: SSDT (null) 01494 (v01 AMI IST 00000001 MSFT 03000001) [ 4.725341] ACPI: Interpreter enabled [ 4.728005] ACPI: (supports S0 S4 S5) [ 4.733094] ACPI: Using IOAPIC for interrupt routing [ 4.740266] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 4.748185] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 4.757534] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 4.766226] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 4.774134] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 4.800313] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 4.812590] ACPI: No dock devices found. [ 4.816006] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 4.820626] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 4.824325] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 4.828004] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 4.832004] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 4.836003] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff] [ 4.840030] pci 0000:00:00.0: [8086:3406] type 0 class 0x000600 [ 4.844075] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 4.848005] pci 0000:00:00.0: PME# disabled [ 4.852030] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604 [ 4.856065] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 4.860004] pci 0000:00:01.0: PME# disabled [ 4.864036] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604 [ 4.868067] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 4.872005] pci 0000:00:03.0: PME# disabled [ 4.876032] pci 0000:00:05.0: [8086:340c] type 1 class 0x000604 [ 4.880067] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 4.884007] pci 0000:00:05.0: PME# disabled [ 4.888029] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604 [ 4.892066] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 4.896004] pci 0000:00:07.0: PME# disabled [ 4.900029] pci 0000:00:09.0: [8086:3410] type 1 class 0x000604 [ 4.904066] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 4.908004] pci 0000:00:09.0: PME# disabled [ 4.912038] pci 0000:00:13.0: [8086:342d] type 0 class 0x000800 [ 4.916016] pci 0000:00:13.0: reg 10: [mem 0xfbe24000-0xfbe24fff] [ 4.920064] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 4.924004] pci 0000:00:13.0: PME# disabled [ 4.928025] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800 [ 4.932090] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800 [ 4.940045] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800 [ 4.944084] pci 0000:00:14.3: [8086:3438] type 0 class 0x000800 [ 4.948087] pci 0000:00:16.0: [8086:3430] type 0 class 0x000880 [ 4.952018] pci 0000:00:16.0: reg 10: [mem 0xfbe1c000-0xfbe1ffff 64bit] [ 4.956087] pci 0000:00:16.1: [8086:3431] type 0 class 0x000880 [ 4.960017] pci 0000:00:16.1: reg 10: [mem 0xfbe18000-0xfbe1bfff 64bit] [ 4.964087] pci 0000:00:16.2: [8086:3432] type 0 class 0x000880 [ 4.968017] pci 0000:00:16.2: reg 10: [mem 0xfbe14000-0xfbe17fff 64bit] [ 4.972090] pci 0000:00:16.3: [8086:3433] type 0 class 0x000880 [ 4.976017] pci 0000:00:16.3: reg 10: [mem 0xfbe10000-0xfbe13fff 64bit] [ 4.980090] pci 0000:00:16.4: [8086:3429] type 0 class 0x000880 [ 4.984017] pci 0000:00:16.4: reg 10: [mem 0xfbe0c000-0xfbe0ffff 64bit] [ 4.988087] pci 0000:00:16.5: [8086:342a] type 0 class 0x000880 [ 4.992017] pci 0000:00:16.5: reg 10: [mem 0xfbe08000-0xfbe0bfff 64bit] [ 4.996087] pci 0000:00:16.6: [8086:342b] type 0 class 0x000880 [ 5.000017] pci 0000:00:16.6: reg 10: [mem 0xfbe04000-0xfbe07fff 64bit] [ 5.004090] pci 0000:00:16.7: [8086:342c] type 0 class 0x000880 [ 5.008017] pci 0000:00:16.7: reg 10: [mem 0xfbe00000-0xfbe03fff 64bit] [ 5.012095] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03 [ 5.016058] pci 0000:00:1a.0: reg 20: [io 0xf0c0-0xf0df] [ 5.020061] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03 [ 5.024058] pci 0000:00:1a.2: reg 20: [io 0xf0a0-0xf0bf] [ 5.028075] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03 [ 5.032028] pci 0000:00:1a.7: reg 10: [mem 0xfbe23000-0xfbe233ff] [ 5.036097] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 5.040006] pci 0000:00:1a.7: PME# disabled [ 5.044027] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604 [ 5.048077] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 5.052005] pci 0000:00:1c.0: PME# disabled [ 5.056032] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604 [ 5.060077] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 5.064005] pci 0000:00:1c.4: PME# disabled [ 5.068035] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03 [ 5.072058] pci 0000:00:1d.0: reg 20: [io 0xf080-0xf09f] [ 5.076059] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03 [ 5.080057] pci 0000:00:1d.1: reg 20: [io 0xf060-0xf07f] [ 5.084062] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03 [ 5.088058] pci 0000:00:1d.2: reg 20: [io 0xf040-0xf05f] [ 5.092072] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03 [ 5.096028] pci 0000:00:1d.7: reg 10: [mem 0xfbe22000-0xfbe223ff] [ 5.100097] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 5.104005] pci 0000:00:1d.7: PME# disabled [ 5.108029] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 5.112077] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601 [ 5.116099] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO [ 5.120005] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO [ 5.124004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0600 (mask 00ff) [ 5.128004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f) [ 5.132004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 001f) [ 5.136004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0ca0 (mask 000f) [ 5.140053] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106 [ 5.144026] pci 0000:00:1f.2: reg 10: [io 0xf110-0xf117] [ 5.148011] pci 0000:00:1f.2: reg 14: [io 0xf100-0xf103] [ 5.152011] pci 0000:00:1f.2: reg 18: [io 0xf0f0-0xf0f7] [ 5.156011] pci 0000:00:1f.2: reg 1c: [io 0xf0e0-0xf0e3] [ 5.160011] pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f] [ 5.164011] pci 0000:00:1f.2: reg 24: [mem 0xfbe21000-0xfbe217ff] [ 5.168048] pci 0000:00:1f.2: PME# supported from D3hot [ 5.172005] pci 0000:00:1f.2: PME# disabled [ 5.176023] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05 [ 5.180020] pci 0000:00:1f.3: reg 10: [mem 0xfbe20000-0xfbe200ff 64bit] [ 5.184029] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f] [ 5.188108] pci 0000:01:00.0: [8086:10c9] type 0 class 0x000200 [ 5.192017] pci 0000:01:00.0: reg 10: [mem 0xfbaa0000-0xfbabffff] [ 5.196012] pci 0000:01:00.0: reg 14: [mem 0xfba80000-0xfba9ffff] [ 5.200012] pci 0000:01:00.0: reg 18: [io 0xe020-0xe03f] [ 5.204013] pci 0000:01:00.0: reg 1c: [mem 0xfbb44000-0xfbb47fff] [ 5.208032] pci 0000:01:00.0: reg 30: [mem 0xfba60000-0xfba7ffff pref] [ 5.212039] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 5.216005] pci 0000:01:00.0: PME# disabled [ 5.220051] pci 0000:01:00.1: [8086:10c9] type 0 class 0x000200 [ 5.224016] pci 0000:01:00.1: reg 10: [mem 0xfba40000-0xfba5ffff] [ 5.228012] pci 0000:01:00.1: reg 14: [mem 0xfba20000-0xfba3ffff] [ 5.232012] pci 0000:01:00.1: reg 18: [io 0xe000-0xe01f] [ 5.236012] pci 0000:01:00.1: reg 1c: [mem 0xfbb40000-0xfbb43fff] [ 5.240032] pci 0000:01:00.1: reg 30: [mem 0xfba00000-0xfba1ffff pref] [ 5.244040] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 5.248005] pci 0000:01:00.1: PME# disabled [ 5.252021] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 5.256005] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 5.260005] pci 0000:00:01.0: bridge window [mem 0xfba00000-0xfbbfffff] [ 5.264007] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.268053] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 5.272005] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled) [ 5.276005] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 5.280007] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.284052] pci 0000:00:05.0: PCI bridge to [bus 04-04] [ 5.288005] pci 0000:00:05.0: bridge window [io 0xf000-0x0000] (disabled) [ 5.292004] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 5.296007] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.300052] pci 0000:00:07.0: PCI bridge to [bus 05-05] [ 5.304005] pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled) [ 5.308004] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 5.312007] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.316064] pci 0000:06:00.0: [8086:0329] type 1 class 0x000604 [ 5.320023] pci 0000:06:00.0: PXH quirk detected; SHPC device MSI disabled [ 5.324065] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 5.328004] pci 0000:06:00.0: PME# disabled [ 5.332030] pci 0000:06:00.2: [8086:032a] type 1 class 0x000604 [ 5.336022] pci 0000:06:00.2: PXH quirk detected; SHPC device MSI disabled [ 5.340065] pci 0000:06:00.2: PME# supported from D0 D3hot D3cold [ 5.344004] pci 0000:06:00.2: PME# disabled [ 5.348021] pci 0000:00:09.0: PCI bridge to [bus 06-08] [ 5.352005] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 5.356004] pci 0000:00:09.0: bridge window [mem 0xfb700000-0xfb9fffff] [ 5.360007] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.364091] pci 0000:06:00.0: PCI bridge to [bus 07-07] [ 5.368005] pci 0000:06:00.0: bridge window [io 0xf000-0x0000] (disabled) [ 5.372005] pci 0000:06:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 5.376007] pci 0000:06:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.380057] pci 0000:08:01.0: [8086:1229] type 0 class 0x000200 [ 5.384021] pci 0000:08:01.0: reg 10: [mem 0xfb900000-0xfb900fff] [ 5.388013] pci 0000:08:01.0: reg 14: [io 0xd000-0xd03f] [ 5.392013] pci 0000:08:01.0: reg 18: [mem 0xfb800000-0xfb8fffff] [ 5.396043] pci 0000:08:01.0: reg 30: [mem 0xfb700000-0xfb7fffff pref] [ 5.400024] pci 0000:08:01.0: supports D1 D2 [ 5.404002] pci 0000:08:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 5.408015] pci 0000:08:01.0: PME# disabled [ 5.412061] pci 0000:06:00.2: PCI bridge to [bus 08-08] [ 5.416005] pci 0000:06:00.2: bridge window [io 0xd000-0xdfff] [ 5.420005] pci 0000:06:00.2: bridge window [mem 0xfb700000-0xfb9fffff] [ 5.424008] pci 0000:06:00.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.428086] pci 0000:09:00.0: [1000:0058] type 0 class 0x000100 [ 5.432019] pci 0000:09:00.0: reg 10: [io 0xc000-0xc0ff] [ 5.436021] pci 0000:09:00.0: reg 14: [mem 0xfb610000-0xfb613fff 64bit] [ 5.440021] pci 0000:09:00.0: reg 1c: [mem 0xfb600000-0xfb60ffff 64bit] [ 5.444025] pci 0000:09:00.0: reg 30: [mem 0xfb400000-0xfb5fffff pref] [ 5.448039] pci 0000:09:00.0: supports D1 D2 [ 5.452021] pci 0000:00:1c.0: PCI bridge to [bus 09-09] [ 5.456005] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff] [ 5.460005] pci 0000:00:1c.0: bridge window [mem 0xfb400000-0xfb6fffff] [ 5.464007] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.468075] pci 0000:0a:00.0: [197b:2368] type 0 class 0x000101 [ 5.472036] pci 0000:0a:00.0: reg 10: [io 0xb040-0xb047] [ 5.476017] pci 0000:0a:00.0: reg 14: [io 0xb030-0xb033] [ 5.480017] pci 0000:0a:00.0: reg 18: [io 0xb020-0xb027] [ 5.484017] pci 0000:0a:00.0: reg 1c: [io 0xb010-0xb013] [ 5.488017] pci 0000:0a:00.0: reg 20: [io 0xb000-0xb00f] [ 5.492032] pci 0000:0a:00.0: reg 30: [mem 0xfbd00000-0xfbd0ffff pref] [ 5.496066] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a] [ 5.500005] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 5.504005] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff] [ 5.508008] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.512048] pci 0000:0b:01.0: [1002:515e] type 0 class 0x000300 [ 5.516023] pci 0000:0b:01.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] [ 5.520013] pci 0000:0b:01.0: reg 14: [io 0xa000-0xa0ff] [ 5.524013] pci 0000:0b:01.0: reg 18: [mem 0xfbc20000-0xfbc2ffff] [ 5.528045] pci 0000:0b:01.0: reg 30: [mem 0xfbc00000-0xfbc1ffff pref] [ 5.532026] pci 0000:0b:01.0: supports D1 D2 [ 5.536063] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] (subtractive decode) [ 5.540005] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 5.544005] pci 0000:00:1e.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 5.548009] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 5.552004] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 5.556003] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 5.560003] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 5.564003] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) [ 5.568046] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 5.577093] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 5.580304] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 5.584174] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 5.588240] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT] [ 5.592150] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9.PXHA._PRT] [ 5.596223] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9.PXHB._PRT] [ 5.668053] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 5.675236] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 5.679236] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 5.683236] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 5.687238] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 5.695236] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 5.699468] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 5.703467] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15) [ 5.707209] vgaarb: device added: PCI:0000:0b:01.0,decodes=io+mem,owns=io+mem,locks=none [ 5.708008] vgaarb: loaded [ 5.711279] SCSI subsystem initialized [ 5.712086] libata version 3.00 loaded. [ 5.720122] usbcore: registered new interface driver usbfs [ 5.724099] usbcore: registered new interface driver hub [ 5.728083] usbcore: registered new device driver usb [ 5.732482] wmi: Mapper loaded [ 5.736078] Advanced Linux Sound Architecture Driver Version 1.0.23. [ 5.740003] PCI: Using ACPI for IRQ routing [ 5.744005] PCI: pci_cache_line_size set to 64 bytes [ 5.748291] reserve RAM buffer: 000000000009c400 - 000000000009ffff [ 5.752005] reserve RAM buffer: 00000000bf30b000 - 00000000bfffffff [ 5.756018] reserve RAM buffer: 00000000bf3de000 - 00000000bfffffff [ 5.760013] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff [ 5.764190] [ 5.764190] printing PIC contents [ 5.768006] ... PIC IMR: ffff [ 5.771172] ... PIC IRR: 0c20 [ 5.772003] ... PIC ISR: 0000 [ 5.776004] ... PIC ELCR: 0c20 [ 5.780003] printing local APIC contents on CPU#0/0: [ 5.784000] ... APIC ID: 00000000 (0) [ 5.784000] ... APIC VERSION: 01060015 [ 5.784000] ... APIC TASKPRI: 00000000 (00) [ 5.784000] ... APIC PROCPRI: 00000000 [ 5.784000] ... APIC LDR: 01000000 [ 5.784000] ... APIC DFR: ffffffff [ 5.784000] ... APIC SPIV: 000001ff [ 5.784000] ... APIC ISR field: [ 5.784000] 0000000000000000000000000000000000000000000000000000000000000000 [ 5.784000] ... APIC TMR field: [ 5.784000] 0000000000000000000000000000000000000000000000000000000000000000 [ 5.784000] ... APIC IRR field: [ 5.784000] 0000000000000000000000000000000000000000000000000000000000008000 [ 5.784000] ... APIC ESR: 00000000 [ 5.784000] ... APIC ICR: 000000fc [ 5.784000] ... APIC ICR2: 35000000 [ 5.784000] ... APIC LVTT: 000200ef [ 5.784000] ... APIC LVTPC: 00000400 [ 5.784000] ... APIC LVT0: 00010700 [ 5.784000] ... APIC LVT1: 00000400 [ 5.784000] ... APIC LVTERR: 000000fe [ 5.784000] ... APIC TMICT: 00008236 [ 5.784000] ... APIC TMCCT: 00007be0 [ 5.784000] ... APIC TDCR: 00000003 [ 5.784000] [ 5.784004] number of MP IRQ sources: 15. [ 5.788002] number of IO-APIC #0 registers: 24. [ 5.792002] number of IO-APIC #2 registers: 24. [ 5.796002] number of IO-APIC #3 registers: 24. [ 5.800004] number of IO-APIC #4 registers: 24. [ 5.804002] testing the IO APIC....................... [ 5.808007] [ 5.809607] IO APIC #0...... [ 5.812002] .... register #00: 00000000 [ 5.816003] ....... : physical APIC id: 00 [ 5.820002] ....... : Delivery Type: 0 [ 5.824002] ....... : LTS : 0 [ 5.828002] .... register #01: 00170020 [ 5.832003] ....... : max redirection entries: 0017 [ 5.836002] ....... : PRQ implemented: 0 [ 5.840002] ....... : IO APIC version: 0020 [ 5.844002] .... IRQ redirection table: [ 5.848004] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 5.852005] 00 000 1 0 0 0 0 0 0 00 [ 5.859339] 01 000 0 0 0 0 0 0 0 31 [ 5.864006] 02 000 0 0 0 0 0 0 0 30 [ 5.868004] 03 000 0 0 0 0 0 0 0 33 [ 5.875340] 04 000 0 0 0 0 0 0 0 34 [ 5.880006] 05 000 0 0 0 0 0 0 0 35 [ 5.884005] 06 000 0 0 0 0 0 0 0 36 [ 5.892004] 07 000 0 0 0 0 0 0 0 37 [ 5.896006] 08 000 0 0 0 0 0 0 0 38 [ 5.900005] 09 000 0 1 0 0 0 0 0 39 [ 5.908005] 0a 000 0 0 0 0 0 0 0 3A [ 5.912006] 0b 000 0 0 0 0 0 0 0 3B [ 5.916005] 0c 000 0 0 0 0 0 0 0 3C [ 5.924004] 0d 000 0 0 0 0 0 0 0 3D [ 5.928006] 0e 000 0 0 0 0 0 0 0 3E [ 5.935339] 0f 000 0 0 0 0 0 0 0 3F [ 5.940005] 10 000 1 0 0 0 0 0 0 00 [ 5.944006] 11 000 1 0 0 0 0 0 0 00 [ 5.951339] 12 000 1 0 0 0 0 0 0 00 [ 5.956004] 13 000 1 0 0 0 0 0 0 00 [ 5.960006] 14 000 1 0 0 0 0 0 0 00 [ 5.967342] 15 072 1 0 0 0 0 0 2 62 [ 5.972005] 16 000 1 0 0 0 0 0 0 00 [ 5.976007] 17 000 1 0 0 0 0 0 0 00 [ 5.984004] [ 5.985607] IO APIC #2...... [ 5.988002] .... register #00: 02000000 [ 5.992003] ....... : physical APIC id: 02 [ 5.996002] ....... : Delivery Type: 0 [ 6.000002] ....... : LTS : 0 [ 6.004002] .... register #01: 00178020 [ 6.008003] ....... : max redirection entries: 0017 [ 6.012002] ....... : PRQ implemented: 1 [ 6.016002] ....... : IO APIC version: 0020 [ 6.020002] .... register #02: 02000000 [ 6.024003] ....... : arbitration: 02 [ 6.028002] .... register #03: 00000001 [ 6.032002] ....... : Boot DT : 1 [ 6.036002] .... IRQ redirection table: [ 6.040003] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 6.044003] 00 000 1 0 0 0 0 0 0 00 [ 6.048003] 01 000 1 0 0 0 0 0 0 00 [ 6.056005] 02 000 1 0 0 0 0 0 0 00 [ 6.060003] 03 000 1 0 0 0 0 0 0 00 [ 6.064003] 04 000 1 0 0 0 0 0 0 00 [ 6.072005] 05 000 1 0 0 0 0 0 0 00 [ 6.076003] 06 000 1 0 0 0 0 0 0 00 [ 6.080003] 07 000 1 0 0 0 0 0 0 00 [ 6.088005] 08 000 1 0 0 0 0 0 0 00 [ 6.092003] 09 000 1 0 0 0 0 0 0 00 [ 6.099339] 0a 000 1 0 0 0 0 0 0 00 [ 6.104006] 0b 000 1 0 0 0 0 0 0 00 [ 6.108003] 0c 000 1 0 0 0 0 0 0 00 [ 6.115340] 0d 000 1 0 0 0 0 0 0 00 [ 6.120005] 0e 000 1 0 0 0 0 0 0 00 [ 6.124003] 0f 000 1 0 0 0 0 0 0 00 [ 6.131338] 10 000 1 0 0 0 0 0 0 00 [ 6.136005] 11 000 1 0 0 0 0 0 0 00 [ 6.140003] 12 000 1 0 0 0 0 0 0 00 [ 6.148003] 13 000 1 0 0 0 0 0 0 00 [ 6.152005] 14 000 1 0 0 0 0 0 0 00 [ 6.156003] 15 000 1 0 0 0 0 0 0 00 [ 6.164003] 16 000 1 0 0 0 0 0 0 00 [ 6.168005] 17 000 1 0 0 0 0 0 0 00 [ 6.172004] [ 6.176002] IO APIC #3...... [ 6.178991] .... register #00: 03000000 [ 6.180002] ....... : physical APIC id: 03 [ 6.184003] ....... : Delivery Type: 0 [ 6.188002] ....... : LTS : 0 [ 6.192002] .... register #01: 00178020 [ 6.196002] ....... : max redirection entries: 0017 [ 6.200003] ....... : PRQ implemented: 1 [ 6.204002] ....... : IO APIC version: 0020 [ 6.208002] .... register #02: 03000000 [ 6.212002] ....... : arbitration: 03 [ 6.216003] .... register #03: 00000001 [ 6.220002] ....... : Boot DT : 1 [ 6.224002] .... IRQ redirection table: [ 6.228002] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 6.232006] 00 000 1 0 0 0 0 0 0 00 [ 6.236003] 01 000 1 0 0 0 0 0 0 00 [ 6.240003] 02 000 1 0 0 0 0 0 0 00 [ 6.248005] 03 000 1 0 0 0 0 0 0 00 [ 6.252003] 04 000 1 0 0 0 0 0 0 00 [ 6.259338] 05 000 1 0 0 0 0 0 0 00 [ 6.264005] 06 000 1 0 0 0 0 0 0 00 [ 6.268003] 07 000 1 0 0 0 0 0 0 00 [ 6.275338] 08 000 1 0 0 0 0 0 0 00 [ 6.280005] 09 000 1 0 0 0 0 0 0 00 [ 6.284003] 0a 000 1 0 0 0 0 0 0 00 [ 6.291339] 0b 000 1 0 0 0 0 0 0 00 [ 6.296005] 0c 000 1 0 0 0 0 0 0 00 [ 6.300003] 0d 000 1 0 0 0 0 0 0 00 [ 6.308003] 0e 000 1 0 0 0 0 0 0 00 [ 6.312005] 0f 000 1 0 0 0 0 0 0 00 [ 6.316003] 10 000 1 0 0 0 0 0 0 00 [ 6.324003] 11 000 1 0 0 0 0 0 0 00 [ 6.328005] 12 000 1 0 0 0 0 0 0 00 [ 6.332003] 13 000 1 0 0 0 0 0 0 00 [ 6.340003] 14 000 1 0 0 0 0 0 0 00 [ 6.344005] 15 000 1 0 0 0 0 0 0 00 [ 6.351341] 16 000 1 0 0 0 0 0 0 00 [ 6.356003] 17 000 1 0 0 0 0 0 0 00 [ 6.360007] [ 6.361606] IO APIC #4...... [ 6.364002] .... register #00: 04000000 [ 6.368002] ....... : physical APIC id: 04 [ 6.372002] ....... : Delivery Type: 0 [ 6.376003] ....... : LTS : 0 [ 6.380002] .... register #01: 00170020 [ 6.384002] ....... : max redirection entries: 0017 [ 6.388002] ....... : PRQ implemented: 0 [ 6.392003] ....... : IO APIC version: 0020 [ 6.396002] .... register #02: 00000000 [ 6.400002] ....... : arbitration: 00 [ 6.404002] .... register #03: 00000001 [ 6.408003] ....... : Boot DT : 1 [ 6.412002] .... IRQ redirection table: [ 6.416002] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 6.420004] 00 000 1 0 0 0 0 0 0 00 [ 6.428004] 01 000 1 0 0 0 0 0 0 00 [ 6.432003] 02 000 1 0 0 0 0 0 0 00 [ 6.439338] 03 000 1 0 0 0 0 0 0 00 [ 6.444003] 04 000 1 0 0 0 0 0 0 00 [ 6.448003] 05 000 1 0 0 0 0 0 0 00 [ 6.455338] 06 000 1 0 0 0 0 0 0 00 [ 6.460004] 07 000 1 0 0 0 0 0 0 00 [ 6.464003] 08 000 1 0 0 0 0 0 0 00 [ 6.472005] 09 000 1 0 0 0 0 0 0 00 [ 6.476003] 0a 000 1 0 0 0 0 0 0 00 [ 6.480004] 0b 000 1 0 0 0 0 0 0 00 [ 6.488006] 0c 000 1 0 0 0 0 0 0 00 [ 6.492004] 0d 000 1 0 0 0 0 0 0 00 [ 6.496004] 0e 000 1 0 0 0 0 0 0 00 [ 6.504005] 0f 000 1 0 0 0 0 0 0 00 [ 6.508003] 10 000 1 0 0 0 0 0 0 00 [ 6.515339] 11 000 1 0 0 0 0 0 0 00 [ 6.520005] 12 000 1 0 0 0 0 0 0 00 [ 6.524004] 13 000 1 0 0 0 0 0 0 00 [ 6.531341] 14 000 1 0 0 0 0 0 0 00 [ 6.536005] 15 000 1 0 0 0 0 0 0 00 [ 6.540003] 16 000 1 0 0 0 0 0 0 00 [ 6.547340] 17 000 1 0 0 0 0 0 0 00 [ 6.552003] IRQ to pin mappings: [ 6.556002] IRQ0 -> 0:2 [ 6.560002] IRQ1 -> 0:1 [ 6.562680] IRQ3 -> 0:3 [ 6.564890] IRQ4 -> 0:4 [ 6.568889] IRQ5 -> 0:5 [ 6.571571] IRQ6 -> 0:6 [ 6.572889] IRQ7 -> 0:7 [ 6.576889] IRQ8 -> 0:8 [ 6.579578] IRQ9 -> 0:9 [ 6.580889] IRQ10 -> 0:10 [ 6.584976] IRQ11 -> 0:11 [ 6.588002] IRQ12 -> 0:12 [ 6.590853] IRQ13 -> 0:13 [ 6.592975] IRQ14 -> 0:14 [ 6.596301] IRQ15 -> 0:15 [ 6.599155] .................................... done. [ 6.600008] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 6.605504] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 6.610005] Switching to clocksource hpet [ 6.646528] pnp: PnP ACPI init [ 6.649748] ACPI: bus type pnp registered [ 6.654089] pnp 00:00: [bus 00-ff] [ 6.657612] pnp 00:00: [io 0x0cf8-0x0cff] [ 6.661831] pnp 00:00: [io 0x0000-0x0cf7 window] [ 6.666658] pnp 00:00: [io 0x0d00-0xffff window] [ 6.671485] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 6.677006] pnp 00:00: [mem 0x00000000 window] [ 6.681573] pnp 00:00: [mem 0xc0000000-0xffffffff window] [ 6.687374] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 6.694812] pnp 00:01: [mem 0xfc000000-0xfcffffff] [ 6.699722] pnp 00:01: [mem 0xfd000000-0xfdffffff] [ 6.704635] pnp 00:01: [mem 0xfe000000-0xfe9fffff] [ 6.709550] pnp 00:01: [mem 0xfea00000-0xfea0001f] [ 6.714462] pnp 00:01: [mem 0xfeb00000-0xfebfffff] [ 6.719376] pnp 00:01: [mem 0xfed00400-0xfed3ffff] [ 6.724291] pnp 00:01: [mem 0xfed45000-0xfedfffff] [ 6.729471] pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 6.736707] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 6.742754] pnp 00:02: [io 0x0290-0x029f] [ 6.746972] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 6.753012] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 6.759053] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 6.765349] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 6.772090] pnp 00:03: [io 0x0060] [ 6.775687] pnp 00:03: [io 0x0064] [ 6.779314] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 6.786816] pnp 00:03: [irq 1] [ 6.790163] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 6.797705] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 6.805382] pnp 00:04: [irq 12] [ 6.808819] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 6.817799] pnp 00:05: [io 0x03f8-0x03ff] [ 6.822029] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) [ 6.829525] pnp 00:05: [irq 4] [ 6.832704] pnp 00:05: [dma 0 disabled] [ 6.836873] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 6.844607] pnp 00:06: [io 0x02f8-0x02ff] [ 6.848837] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) [ 6.856341] pnp 00:06: [irq 3] [ 6.859503] pnp 00:06: [dma 0 disabled] [ 6.863683] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 6.870875] pnp 00:07: [dma 4] [ 6.874052] pnp 00:07: [io 0x0000-0x000f] [ 6.878271] pnp 00:07: [io 0x0081-0x0083] [ 6.882491] pnp 00:07: [io 0x0087] [ 6.886104] pnp 00:07: [io 0x0089-0x008b] [ 6.890326] pnp 00:07: [io 0x008f] [ 6.893932] pnp 00:07: [io 0x00c0-0x00df] [ 6.898335] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active) [ 6.905018] pnp 00:08: [io 0x0070-0x0071] [ 6.909238] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 6.916738] pnp 00:08: [irq 8] [ 6.920140] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active) [ 6.926813] pnp 00:09: [io 0x0061] [ 6.930602] pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active) [ 6.937310] pnp 00:0a: [io 0x0010-0x001f] [ 6.941531] pnp 00:0a: [io 0x0022-0x003f] [ 6.945751] pnp 00:0a: [io 0x0044-0x005f] [ 6.949969] pnp 00:0a: [io 0x0062-0x0063] [ 6.954190] pnp 00:0a: [io 0x0065-0x006f] [ 6.958411] pnp 00:0a: [io 0x0072-0x007f] [ 6.962633] pnp 00:0a: [io 0x0080] [ 6.966247] pnp 00:0a: [io 0x0084-0x0086] [ 6.970466] pnp 00:0a: [io 0x0088] [ 6.974072] pnp 00:0a: [io 0x008c-0x008e] [ 6.978291] pnp 00:0a: [io 0x0090-0x009f] [ 6.982513] pnp 00:0a: [io 0x00a2-0x00bf] [ 6.986733] pnp 00:0a: [io 0x00e0-0x00ef] [ 6.990954] pnp 00:0a: [io 0x04d0-0x04d1] [ 6.995453] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 7.002129] pnp 00:0b: [io 0x00f0-0x00ff] [ 7.006350] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 7.014021] pnp 00:0b: [irq 13] [ 7.017463] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active) [ 7.024851] pnp 00:0c: [io 0x0400-0x047f] [ 7.029077] pnp 00:0c: [io 0x1180-0x119f] [ 7.033292] pnp 00:0c: [io 0x0500-0x057f] [ 7.037512] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff] [ 7.042427] pnp 00:0c: [mem 0xfec00000-0xfecfffff] [ 7.047339] pnp 00:0c: [mem 0xff000000-0xffffffff] [ 7.052523] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 7.059652] pnp 00:0d: [mem 0xfed00000-0xfed003ff] [ 7.064797] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active) [ 7.072089] pnp: PnP ACPI: found 14 devices [ 7.076390] ACPI: ACPI bus type pnp unregistered [ 7.081150] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved [ 7.087882] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved [ 7.094618] system 00:01: [mem 0xfe000000-0xfe9fffff] has been reserved [ 7.101352] system 00:01: [mem 0xfea00000-0xfea0001f] has been reserved [ 7.108085] system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved [ 7.114820] system 00:01: [mem 0xfed00400-0xfed3ffff] could not be reserved [ 7.121909] system 00:01: [mem 0xfed45000-0xfedfffff] has been reserved [ 7.128651] system 00:02: [io 0x0290-0x029f] has been reserved [ 7.134701] system 00:0a: [io 0x04d0-0x04d1] has been reserved [ 7.140748] system 00:0c: [io 0x0400-0x047f] has been reserved [ 7.146789] system 00:0c: [io 0x1180-0x119f] has been reserved [ 7.152831] system 00:0c: [io 0x0500-0x057f] could not be reserved [ 7.159219] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 7.165953] system 00:0c: [mem 0xfec00000-0xfecfffff] could not be reserved [ 7.173034] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved [ 7.195144] pci 0000:00:1c.0: BAR 9: assigned [mem 0xd0000000-0xd01fffff 64bit pref] [ 7.203085] pci 0000:00:1c.4: BAR 9: assigned [mem 0xd0200000-0xd03fffff 64bit pref] [ 7.211017] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 7.216365] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 7.222581] pci 0000:00:01.0: bridge window [mem 0xfba00000-0xfbbfffff] [ 7.229487] pci 0000:00:01.0: bridge window [mem pref disabled] [ 7.235703] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 7.241046] pci 0000:00:03.0: bridge window [io disabled] [ 7.246831] pci 0000:00:03.0: bridge window [mem disabled] [ 7.252610] pci 0000:00:03.0: bridge window [mem pref disabled] [ 7.258828] pci 0000:00:05.0: PCI bridge to [bus 04-04] [ 7.264176] pci 0000:00:05.0: bridge window [io disabled] [ 7.269960] pci 0000:00:05.0: bridge window [mem disabled] [ 7.275742] pci 0000:00:05.0: bridge window [mem pref disabled] [ 7.281957] pci 0000:00:07.0: PCI bridge to [bus 05-05] [ 7.287300] pci 0000:00:07.0: bridge window [io disabled] [ 7.293083] pci 0000:00:07.0: bridge window [mem disabled] [ 7.298862] pci 0000:00:07.0: bridge window [mem pref disabled] [ 7.305080] pci 0000:06:00.0: PCI bridge to [bus 07-07] [ 7.310423] pci 0000:06:00.0: bridge window [io disabled] [ 7.316206] pci 0000:06:00.0: bridge window [mem disabled] [ 7.321987] pci 0000:06:00.0: bridge window [mem pref disabled] [ 7.328204] pci 0000:06:00.2: PCI bridge to [bus 08-08] [ 7.333545] pci 0000:06:00.2: bridge window [io 0xd000-0xdfff] [ 7.339764] pci 0000:06:00.2: bridge window [mem 0xfb700000-0xfb9fffff] [ 7.346678] pci 0000:06:00.2: bridge window [mem pref disabled] [ 7.352894] pci 0000:00:09.0: PCI bridge to [bus 06-08] [ 7.358238] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 7.364453] pci 0000:00:09.0: bridge window [mem 0xfb700000-0xfb9fffff] [ 7.371361] pci 0000:00:09.0: bridge window [mem pref disabled] [ 7.377576] pci 0000:00:1c.0: PCI bridge to [bus 09-09] [ 7.382921] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff] [ 7.389138] pci 0000:00:1c.0: bridge window [mem 0xfb400000-0xfb6fffff] [ 7.396052] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref] [ 7.403983] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a] [ 7.409328] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 7.415544] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff] [ 7.422459] pci 0000:00:1c.4: bridge window [mem 0xd0200000-0xd03fffff 64bit pref] [ 7.430391] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] [ 7.435734] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 7.441951] pci 0000:00:1e.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 7.448866] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 7.456821] IOAPIC[3]: Set routing entry (4-4 -> 0x29 -> IRQ 76 Mode:1 Active:1) [ 7.464408] pci 0000:00:01.0: PCI INT A -> GSI 76 (level, low) -> IRQ 76 [ 7.471237] pci 0000:00:01.0: setting latency timer to 64 [ 7.476762] IOAPIC[3]: Set routing entry (4-0 -> 0x41 -> IRQ 72 Mode:1 Active:1) [ 7.485935] pci 0000:00:03.0: PCI INT A -> GSI 72 (level, low) -> IRQ 72 [ 7.492764] pci 0000:00:03.0: setting latency timer to 64 [ 7.498293] IOAPIC[3]: Set routing entry (4-2 -> 0x49 -> IRQ 74 Mode:1 Active:1) [ 7.505878] pci 0000:00:05.0: PCI INT A -> GSI 74 (level, low) -> IRQ 74 [ 7.512706] pci 0000:00:05.0: setting latency timer to 64 [ 7.518232] IOAPIC[3]: Set routing entry (4-6 -> 0x51 -> IRQ 78 Mode:1 Active:1) [ 7.525817] pci 0000:00:07.0: PCI INT A -> GSI 78 (level, low) -> IRQ 78 [ 7.532638] pci 0000:00:07.0: setting latency timer to 64 [ 7.538166] IOAPIC[3]: Set routing entry (4-8 -> 0x59 -> IRQ 80 Mode:1 Active:1) [ 7.545752] pci 0000:00:09.0: PCI INT A -> GSI 80 (level, low) -> IRQ 80 [ 7.552581] pci 0000:00:09.0: setting latency timer to 64 [ 7.558106] pci 0000:06:00.0: setting latency timer to 64 [ 7.563633] pci 0000:06:00.2: setting latency timer to 64 [ 7.569168] IOAPIC[0]: Set routing entry (0-17 -> 0x61 -> IRQ 17 Mode:1 Active:1) [ 7.576837] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.583659] pci 0000:00:1c.0: setting latency timer to 64 [ 7.589184] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.596010] pci 0000:00:1c.4: setting latency timer to 64 [ 7.601534] pci 0000:00:1e.0: setting latency timer to 64 [ 7.607058] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 7.612749] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 7.618445] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 7.624831] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff] [ 7.631218] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 7.636912] pci_bus 0000:01: resource 1 [mem 0xfba00000-0xfbbfffff] [ 7.643300] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff] [ 7.648994] pci_bus 0000:06: resource 1 [mem 0xfb700000-0xfb9fffff] [ 7.655379] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 7.661076] pci_bus 0000:08: resource 1 [mem 0xfb700000-0xfb9fffff] [ 7.667463] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 7.673157] pci_bus 0000:09: resource 1 [mem 0xfb400000-0xfb6fffff] [ 7.679544] pci_bus 0000:09: resource 2 [mem 0xd0000000-0xd01fffff 64bit pref] [ 7.686953] pci_bus 0000:0a: resource 0 [io 0xb000-0xbfff] [ 7.692646] pci_bus 0000:0a: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 7.699034] pci_bus 0000:0a: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref] [ 7.706445] pci_bus 0000:0b: resource 0 [io 0xa000-0xafff] [ 7.712138] pci_bus 0000:0b: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 7.718525] pci_bus 0000:0b: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref] [ 7.725936] pci_bus 0000:0b: resource 4 [io 0x0000-0x0cf7] [ 7.731629] pci_bus 0000:0b: resource 5 [io 0x0d00-0xffff] [ 7.737323] pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff] [ 7.743710] pci_bus 0000:0b: resource 7 [mem 0xc0000000-0xffffffff] [ 7.750460] NET: Registered protocol family 2 [ 7.756203] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 7.767118] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 7.777464] TCP bind hash table entries: 65536 (order: 10, 5242880 bytes) [ 7.787157] TCP: Hash tables configured (established 524288 bind 65536) [ 7.793919] TCP reno registered [ 7.797538] UDP hash table entries: 8192 (order: 8, 1572864 bytes) [ 7.804934] UDP-Lite hash table entries: 8192 (order: 8, 1572864 bytes) [ 7.812895] NET: Registered protocol family 1 [ 7.817838] RPC: Registered udp transport module. [ 7.822667] RPC: Registered tcp transport module. [ 7.827491] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 7.834137] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x003f [ 7.840799] pci 0000:00:1a.0: Performing full reset [ 7.845828] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x003f [ 7.852478] pci 0000:00:1a.2: Performing full reset [ 7.857553] pci 0000:00:1a.7: EHCI: BIOS handoff [ 7.888101] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x103f [ 7.894759] pci 0000:00:1d.0: Performing full reset [ 7.899771] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x003f [ 7.906419] pci 0000:00:1d.1: Performing full reset [ 7.911436] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x003f [ 7.918084] pci 0000:00:1d.2: Performing full reset [ 7.923151] pci 0000:00:1d.7: EHCI: BIOS handoff [ 7.952213] pci 0000:0b:01.0: Boot video device [ 7.956877] PCI: CLS 64 bytes, default 64 [ 7.961129] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 7.967692] Placing 64MB software IO TLB between ffff8800b7800000 - ffff8800bb800000 [ 7.975623] software IO TLB at phys 0xb7800000 - 0xbb800000 [ 7.998184] Machine check injector initialized [ 8.010046] microcode: CPU0 sig=0x206c1, pf=0x1, revision=0x3 [ 8.015928] microcode: CPU1 sig=0x206c1, pf=0x1, revision=0x3 [ 8.021808] microcode: CPU2 sig=0x206c1, pf=0x1, revision=0x3 [ 8.027676] microcode: CPU3 sig=0x206c1, pf=0x1, revision=0x3 [ 8.033553] microcode: CPU4 sig=0x206c1, pf=0x1, revision=0x3 [ 8.039429] microcode: CPU5 sig=0x206c1, pf=0x1, revision=0x3 [ 8.045306] microcode: CPU6 sig=0x206c1, pf=0x1, revision=0x3 [ 8.051190] microcode: CPU7 sig=0x206c1, pf=0x1, revision=0x3 [ 8.057073] microcode: CPU8 sig=0x206c1, pf=0x1, revision=0x3 [ 8.062941] microcode: CPU9 sig=0x206c1, pf=0x1, revision=0x3 [ 8.068817] microcode: CPU10 sig=0x206c1, pf=0x1, revision=0x3 [ 8.074780] microcode: CPU11 sig=0x206c1, pf=0x1, revision=0x3 [ 8.080742] microcode: CPU12 sig=0x206c1, pf=0x1, revision=0x3 [ 8.086705] microcode: CPU13 sig=0x206c1, pf=0x1, revision=0x3 [ 8.092659] microcode: CPU14 sig=0x206c1, pf=0x1, revision=0x3 [ 8.098620] microcode: CPU15 sig=0x206c1, pf=0x1, revision=0x3 [ 8.104576] microcode: CPU16 sig=0x206c1, pf=0x1, revision=0x3 [ 8.110528] microcode: CPU17 sig=0x206c1, pf=0x1, revision=0x3 [ 8.116483] microcode: CPU18 sig=0x206c1, pf=0x1, revision=0x3 [ 8.122446] microcode: CPU19 sig=0x206c1, pf=0x1, revision=0x3 [ 8.128408] microcode: CPU20 sig=0x206c1, pf=0x1, revision=0x3 [ 8.134363] microcode: CPU21 sig=0x206c1, pf=0x1, revision=0x3 [ 8.140324] microcode: CPU22 sig=0x206c1, pf=0x1, revision=0x3 [ 8.146287] microcode: CPU23 sig=0x206c1, pf=0x1, revision=0x3 [ 8.152372] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 8.161350] Scanning for low memory corruption every 60 seconds [ 8.168291] audit: initializing netlink socket (disabled) [ 8.173846] type=2000 audit(1293791888.172:1): initialized [ 8.193806] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 8.204044] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 8.211296] fuse init (API version 7.15) [ 8.215754] JFS: nTxBlock = 8192, nTxLock = 65536 [ 8.224866] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 8.235947] Btrfs loaded [ 8.238619] msgmni has been set to 31955 [ 8.244026] async_tx: api initialized (async) [ 8.248699] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 8.256290] io scheduler noop registered [ 8.260337] io scheduler deadline registered [ 8.264894] io scheduler cfq registered (default) [ 8.271468] pcieport 0000:00:01.0: ACPI _OSC control granted for 0x1c [ 8.278051] pcieport 0000:00:01.0: setting latency timer to 64 [ 8.284067] pcieport 0000:00:01.0: irq 112 for MSI/MSI-X [ 8.291032] pcieport 0000:00:03.0: ACPI _OSC control granted for 0x1c [ 8.297607] pcieport 0000:00:03.0: setting latency timer to 64 [ 8.303604] pcieport 0000:00:03.0: irq 113 for MSI/MSI-X [ 8.310566] pcieport 0000:00:05.0: ACPI _OSC control granted for 0x1c [ 8.317141] pcieport 0000:00:05.0: setting latency timer to 64 [ 8.323142] pcieport 0000:00:05.0: irq 114 for MSI/MSI-X [ 8.330107] pcieport 0000:00:07.0: ACPI _OSC control granted for 0x1c [ 8.336686] pcieport 0000:00:07.0: setting latency timer to 64 [ 8.342691] pcieport 0000:00:07.0: irq 115 for MSI/MSI-X [ 8.349653] pcieport 0000:00:09.0: ACPI _OSC control granted for 0x1c [ 8.356228] pcieport 0000:00:09.0: setting latency timer to 64 [ 8.362225] pcieport 0000:00:09.0: irq 116 for MSI/MSI-X [ 8.369200] pcieport 0000:00:1c.0: ACPI _OSC control granted for 0x1c [ 8.375778] pcieport 0000:00:1c.0: setting latency timer to 64 [ 8.381780] pcieport 0000:00:1c.0: irq 117 for MSI/MSI-X [ 8.388769] pcieport 0000:00:1c.4: ACPI _OSC control granted for 0x1c [ 8.395348] pcieport 0000:00:1c.4: setting latency timer to 64 [ 8.401350] pcieport 0000:00:1c.4: irq 118 for MSI/MSI-X [ 8.407282] aer 0000:00:01.0:pcie02: service driver aer loaded [ 8.413289] aer 0000:00:03.0:pcie02: service driver aer loaded [ 8.419294] aer 0000:00:05.0:pcie02: service driver aer loaded [ 8.425294] aer 0000:00:07.0:pcie02: service driver aer loaded [ 8.431304] aer 0000:00:09.0:pcie02: service driver aer loaded [ 8.437481] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 8.444148] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 8.452527] ACPI: Sleep Button [SLPB] [ 8.456480] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 8.464857] ACPI: Power Button [PWRB] [ 8.468835] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 8.476417] ACPI: Power Button [PWRF] [ 8.481497] ACPI: acpi_idle registered with cpuidle [ 8.487285] Monitor-Mwait will be used to enter C-3 state [ 8.492865] Monitor-Mwait will be used to enter C-3 state [ 8.614930] Initializing Nozomi driver 2.1d (build date: Dec 31 2010 09:03:57) [ 8.623433] Non-volatile memory driver v1.3 [ 8.628255] Linux agpgart interface v0.103 [ 8.632610] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 8.641755] Hangcheck: Using getrawmonotonic(). [ 8.646540] [drm] Initialized drm 1.1.0 20060810 [ 8.651283] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module! [ 8.658963] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 8.685846] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 8.764388] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 8.985035] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 9.072727] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 12.160181] floppy0: no floppy controllers found [ 12.170990] brd: module loaded [ 12.176923] loop: module loaded [ 12.181256] Loading iSCSI transport class v2.0-870. [ 12.187611] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 12.193312] Detecting Adaptec I2O RAID controllers... [ 12.198813] Adaptec aacraid driver 1.1-5[26400]-ms [ 12.204393] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 12.211792] QLogic Fibre Channel HBA Driver: 8.03.05-k0 [ 12.217501] iscsi: registered transport (qla4xxx) [ 12.222467] QLogic iSCSI HBA Driver [ 12.226227] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 12.233879] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 12.241099] megasas: 00.00.04.31-rc1 Mon. May 3, 11:41:51 PST 2010 [ 12.247547] mpt2sas version 06.100.00.00 loaded [ 12.252957] ahci 0000:00:1f.2: version 3.0 [ 12.257193] IOAPIC[0]: Set routing entry (0-19 -> 0xa1 -> IRQ 19 Mode:1 Active:1) [ 12.264864] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 12.271865] ahci 0000:00:1f.2: irq 119 for MSI/MSI-X [ 12.277062] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 12.285431] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ccc ems sxs [ 12.293622] ahci 0000:00:1f.2: setting latency timer to 64 [ 12.338935] scsi0 : ahci [ 12.342098] scsi1 : ahci [ 12.345094] scsi2 : ahci [ 12.348098] scsi3 : ahci [ 12.351082] scsi4 : ahci [ 12.354070] scsi5 : ahci [ 12.357578] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 119 [ 12.366030] ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 119 [ 12.374479] ata3: SATA max UDMA/133 abar m2048@0xfbe21000 port 0xfbe21200 irq 119 [ 12.382148] ata4: SATA max UDMA/133 abar m2048@0xfbe21000 port 0xfbe21280 irq 119 [ 12.389817] ata5: SATA max UDMA/133 abar m2048@0xfbe21000 port 0xfbe21300 irq 119 [ 12.397489] ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 119 [ 12.410682] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 12.417856] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 12.423864] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2 [ 12.429901] e1000e: Copyright (c) 1999 - 2010 Intel Corporation. [ 12.436169] Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2 [ 12.442900] Copyright (c) 2007-2009 Intel Corporation. [ 12.448204] igb 0000:01:00.0: PCI INT A -> GSI 76 (level, low) -> IRQ 76 [ 12.455036] igb 0000:01:00.0: setting latency timer to 64 [ 12.460882] igb 0000:01:00.0: irq 120 for MSI/MSI-X [ 12.465891] igb 0000:01:00.0: irq 121 for MSI/MSI-X [ 12.470890] igb 0000:01:00.0: irq 122 for MSI/MSI-X [ 12.475889] igb 0000:01:00.0: irq 123 for MSI/MSI-X [ 12.480890] igb 0000:01:00.0: irq 124 for MSI/MSI-X [ 12.485892] igb 0000:01:00.0: irq 125 for MSI/MSI-X [ 12.490893] igb 0000:01:00.0: irq 126 for MSI/MSI-X [ 12.495892] igb 0000:01:00.0: irq 127 for MSI/MSI-X [ 12.500899] igb 0000:01:00.0: irq 128 for MSI/MSI-X [ 12.721572] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 12.724042] ata4: SATA link down (SStatus 0 SControl 300) [ 12.724076] ata3: SATA link down (SStatus 0 SControl 300) [ 12.724108] ata5: SATA link down (SStatus 0 SControl 300) [ 12.745109] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:30:48:cf:17:26 [ 12.752445] igb 0000:01:00.0: eth0: PBA No: 0010ff-0ff [ 12.757708] igb 0000:01:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 12.765500] IOAPIC[3]: Set routing entry (4-16 -> 0x2a -> IRQ 88 Mode:1 Active:1) [ 12.773174] igb 0000:01:00.1: PCI INT B -> GSI 88 (level, low) -> IRQ 88 [ 12.780016] igb 0000:01:00.1: setting latency timer to 64 [ 12.785858] igb 0000:01:00.1: irq 129 for MSI/MSI-X [ 12.790863] igb 0000:01:00.1: irq 130 for MSI/MSI-X [ 12.795861] igb 0000:01:00.1: irq 131 for MSI/MSI-X [ 12.800864] igb 0000:01:00.1: irq 132 for MSI/MSI-X [ 12.805864] igb 0000:01:00.1: irq 133 for MSI/MSI-X [ 12.810865] igb 0000:01:00.1: irq 134 for MSI/MSI-X [ 12.815864] igb 0000:01:00.1: irq 135 for MSI/MSI-X [ 12.820865] igb 0000:01:00.1: irq 136 for MSI/MSI-X [ 12.825869] igb 0000:01:00.1: irq 137 for MSI/MSI-X [ 13.037523] igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection [ 13.044523] igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:30:48:cf:17:27 [ 13.051858] igb 0000:01:00.1: eth1: PBA No: 0010ff-0ff [ 13.057113] igb 0000:01:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 13.064985] Intel(R) Virtual Function Network Driver - version 1.0.0-k0 [ 13.071717] Copyright (c) 2009 Intel Corporation. [ 13.076672] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 2.0.84-k2 [ 13.084691] ixgbe: Copyright (c) 1999-2010 Intel Corporation. [ 13.090698] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 13.097951] ixgb: Copyright (c) 1999-2008 Intel Corporation. [ 13.104408] jme: JMicron JMC2XX ethernet driver version 1.0.7 [ 13.110782] ns83820.c: National Semiconductor DP83820 10/100/1000 driver. [ 13.118074] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.6 (Oct 12, 2010) [ 13.125773] sky2: driver version 1.28 [ 13.128044] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 13.128078] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 13.128105] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 13.129193] ata1.00: ATA-8: ST31000528AS, CC35, max UDMA/133 [ 13.129197] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 13.130469] ata1.00: configured for UDMA/133 [ 13.130732] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC35 PQ: 0 ANSI: 5 [ 13.130782] ata6.00: ATAPI: Slimtype DVD A DS8A2S, 6P5D, max UDMA/100 [ 13.131178] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 13.131293] sd 0:0:0:0: [sda] Write Protect is off [ 13.131296] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 13.131361] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.134542] ata6.00: configured for UDMA/100 [ 13.137561] sda: sda1 sda2 [ 13.171491] ata2.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133 [ 13.171494] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 13.228279] sd 0:0:0:0: [sda] Attached SCSI disk [ 13.229162] tun: Universal TUN/TAP device driver, 1.6 [ 13.229164] tun: (C) 1999-2004 Max Krasnyansky [ 13.229672] usbcore: registered new interface driver catc [ 13.229673] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver [ 13.229773] usbcore: registered new interface driver kaweth [ 13.229774] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 13.229796] ata2.00: configured for UDMA/133 [ 13.229882] usbcore: registered new interface driver pegasus [ 13.229883] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver [ 13.229973] usbcore: registered new interface driver rtl8150 [ 13.229986] scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 13.230060] usbcore: registered new interface driver asix [ 13.230160] usbcore: registered new interface driver cdc_ether [ 13.230278] usbcore: registered new interface driver cdc_eem [ 13.230415] usbcore: registered new interface driver dm9601 [ 13.230495] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 13.230513] usbcore: registered new interface driver smsc75xx [ 13.230656] usbcore: registered new interface driver smsc95xx [ 13.230676] sd 1:0:0:0: [sdb] Write Protect is off [ 13.230679] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 13.230745] usbcore: registered new interface driver gl620a [ 13.230750] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.230838] usbcore: registered new interface driver net1080 [ 13.230939] usbcore: registered new interface driver plusb [ 13.231022] usbcore: registered new interface driver rndis_host [ 13.231104] usbcore: registered new interface driver cdc_subset [ 13.231187] usbcore: registered new interface driver zaurus [ 13.231268] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 13.231358] usbcore: registered new interface driver int51x1 [ 13.231361] netconsole: local port 6665 [ 13.231363] netconsole: local IP 10.0.0.0 [ 13.231364] netconsole: interface 'eth0' [ 13.231365] netconsole: remote port 6666 [ 13.231366] netconsole: remote IP 192.168.1.11 [ 13.231367] netconsole: remote ethernet address 00:30:48:fe:19:95 [ 13.231369] netconsole: device eth0 not up yet, forcing it [ 13.233872] scsi 5:0:0:0: CD-ROM Slimtype DVD A DS8A2S 6P5D PQ: 0 ANSI: 5 [ 13.283199] sdb: sdb1 sdb2 sdb3 < sdb5 > [ 13.455943] sd 1:0:0:0: [sdb] Attached SCSI disk [ 15.460580] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 23.953643] console [netcon0] enabled [ 23.957436] netconsole: network logging started [ 23.962277] Fusion MPT base driver 3.04.17 [ 23.966534] Copyright (c) 1999-2008 LSI Corporation [ 23.971584] Fusion MPT SPI Host driver 3.04.17 [ 23.976302] Fusion MPT FC Host driver 3.04.17 [ 23.980916] Fusion MPT SAS Host driver 3.04.17 [ 23.985547] IOAPIC[0]: Set routing entry (0-16 -> 0x8a -> IRQ 16 Mode:1 Active:1) [ 23.993222] mptsas 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 24.000484] mptbase: ioc0: Initiating bringup [ 24.708026] ioc0: LSISAS1068E B2: Capabilities={Initiator} [ 24.713943] mptsas 0000:09:00.0: setting latency timer to 64 [ 35.543442] scsi6 : ioc0: LSISAS1068E B2, FwRev=01120000h, Ports=1, MaxQ=511, IRQ=16 [ 35.581937] mptsas: ioc0: add expander: num_phys 13, sas_addr (0x5000bb52118dc0ff) [ 35.634549] mptsas: ioc0: add expander: num_phys 12, sas_addr (0x5000bb52118dc1ff) [ 35.695075] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 18, phy 0, sas_addr 0x5000c500022d0c6d [ 35.706417] scsi 6:0:0:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 35.739728] sd 6:0:0:0: [sdc] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 35.747433] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 14, phy 1, sas_addr 0x5000c500022d09b5 [ 35.758736] sd 6:0:0:0: [sdc] Write Protect is off [ 35.763676] sd 6:0:0:0: [sdc] Mode Sense: b3 00 10 08 [ 35.763694] scsi 6:0:1:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 35.798159] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 35.807658] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 16, phy 2, sas_addr 0x5000c500022d0f35 [ 35.817566] sd 6:0:1:0: [sdd] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 35.839406] scsi 6:0:2:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 35.847743] sd 6:0:1:0: [sdd] Write Protect is off [ 35.852666] sd 6:0:1:0: [sdd] Mode Sense: b3 00 10 08 [ 35.872748] sd 6:0:2:0: [sde] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 35.880452] sd 6:0:1:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 35.880476] sdc: sdc1 sdc2 [ 35.884061] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 17, phy 3, sas_addr 0x5000c500022d2a0d [ 35.885490] scsi 6:0:3:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 35.885863] sd 6:0:2:0: [sde] Write Protect is off [ 35.885865] sd 6:0:2:0: [sde] Mode Sense: b3 00 10 08 [ 35.887986] sd 6:0:2:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 35.910423] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 15, phy 4, sas_addr 0x5000c500022d25dd [ 35.910450] sd 6:0:3:0: [sdf] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 35.932341] scsi 6:0:4:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 35.933749] sd 6:0:3:0: [sdf] Write Protect is off [ 35.933752] sd 6:0:3:0: [sdf] Mode Sense: b3 00 10 08 [ 35.956616] sd 6:0:3:0: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 35.957248] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 19, phy 5, sas_addr 0x5000c500022c3f65 [ 35.957263] sd 6:0:4:0: [sdg] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 35.976792] sde: sde1 sde2 [ 35.979310] scsi 6:0:5:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 35.979876] sd 6:0:4:0: [sdg] Write Protect is off [ 35.979879] sd 6:0:4:0: [sdg] Mode Sense: b3 00 10 08 [ 35.981799] sd 6:0:4:0: [sdg] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.004223] mptsas: ioc0: attaching stp device: fw_channel 0, fw_id 20, phy 12, sas_addr 0x5000bb52118dc0fc [ 36.004245] sd 6:0:5:0: [sdh] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.025633] sdf: sdf1 sdf2 [ 36.026960] sd 6:0:5:0: [sdh] Write Protect is off [ 36.026962] sd 6:0:5:0: [sdh] Mode Sense: b3 00 10 08 [ 36.028641] sd 6:0:5:0: [sdh] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.054978] sdg: sdg1 sdg2 [ 36.058904] sdh: sdh1 sdh2 [ 36.194745] scsi 6:0:6:0: Enclosure XYRATEX 3GSAS1.0-SATAEXP 1.05 PQ: 0 ANSI: 5 [ 36.198394] sd 6:0:0:0: [sdc] Attached SCSI disk [ 36.198412] sd 6:0:3:0: [sdf] Attached SCSI disk [ 36.198415] sd 6:0:5:0: [sdh] Attached SCSI disk [ 36.198428] sd 6:0:2:0: [sde] Attached SCSI disk [ 36.198534] sd 6:0:4:0: [sdg] Attached SCSI disk [ 36.203628] sdd: sdd1 sdd2 [ 36.255575] sd 6:0:1:0: [sdd] Attached SCSI disk [ 36.370680] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 28, phy 0, sas_addr 0x5000c500022c41a5 [ 36.381992] scsi 6:0:7:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 36.415276] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 29, phy 1, sas_addr 0x5000c500130f4649 [ 36.425220] sd 6:0:7:0: [sdi] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.434776] sd 6:0:7:0: [sdi] Write Protect is off [ 36.439703] sd 6:0:7:0: [sdi] Mode Sense: b3 00 10 08 [ 36.446535] sd 6:0:7:0: [sdi] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.477605] scsi 6:0:8:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 36.488636] sd 6:0:8:0: [sdj] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.497495] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 30, phy 2, sas_addr 0x5000c500130fe681 [ 36.507396] sdi: sdi1 sdi2 [ 36.511238] sd 6:0:8:0: [sdj] Write Protect is off [ 36.517757] sd 6:0:8:0: [sdj] Mode Sense: b3 00 10 08 [ 36.532996] scsi 6:0:9:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 36.541351] sd 6:0:8:0: [sdj] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.544025] sd 6:0:9:0: [sdk] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.544892] sd 6:0:7:0: [sdi] Attached SCSI disk [ 36.545584] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 31, phy 3, sas_addr 0x5000c500130f4f4d [ 36.546517] sd 6:0:9:0: [sdk] Write Protect is off [ 36.546520] sd 6:0:9:0: [sdk] Mode Sense: b3 00 10 08 [ 36.547987] sd 6:0:9:0: [sdk] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.557379] sdk: sdk1 sdk2 [ 36.588437] scsi 6:0:10:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 36.591042] sd 6:0:10:0: [sdl] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.592501] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 32, phy 4, sas_addr 0x5000c50013005f59 [ 36.593756] sd 6:0:10:0: [sdl] Write Protect is off [ 36.593758] sd 6:0:10:0: [sdl] Mode Sense: b3 00 10 08 [ 36.593872] scsi 6:0:11:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 36.595485] sd 6:0:10:0: [sdl] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.596516] sd 6:0:11:0: [sdm] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.598036] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 33, phy 5, sas_addr 0x5000c500130e21cd [ 36.599296] sd 6:0:11:0: [sdm] Write Protect is off [ 36.599298] sd 6:0:11:0: [sdm] Mode Sense: b3 00 10 08 [ 36.600722] sd 6:0:11:0: [sdm] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.604835] sdm: sdm1 sdm2 [ 36.607222] sdl: sdl1 sdl2 [ 36.623912] scsi 6:0:12:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 36.626494] sd 6:0:12:0: [sdn] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.628053] Fusion MPT misc device (ioctl) driver 3.04.17 [ 36.628193] mptctl: Registered with Fusion MPT base driver [ 36.628195] mptctl: /dev/mptctl @ (major,minor=10,220) [ 36.628380] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 36.628383] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 36.628452] IOAPIC[0]: Set routing entry (0-18 -> 0x92 -> IRQ 18 Mode:1 Active:1) [ 36.628457] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 36.628503] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 36.628506] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 36.628586] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file 'devices' [ 36.628603] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 36.628617] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 36.629184] sd 6:0:12:0: [sdn] Write Protect is off [ 36.629186] sd 6:0:12:0: [sdn] Mode Sense: b3 00 10 08 [ 36.630615] sd 6:0:12:0: [sdn] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.634688] sdn: sdn1 sdn2 [ 36.811354] sd 6:0:10:0: [sdl] Attached SCSI disk [ 36.816226] sd 6:0:11:0: [sdm] Attached SCSI disk [ 36.816252] sd 6:0:9:0: [sdk] Attached SCSI disk [ 36.818243] sdj: sdj1 sdj2 [ 36.828716] sd 6:0:12:0: [sdn] Attached SCSI disk [ 36.837119] sd 6:0:8:0: [sdj] Attached SCSI disk [ 36.856028] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 36.865187] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 36.874823] ehci_hcd 0000:00:1a.7: debug port 1 [ 36.879479] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 36.892494] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 36.899407] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 36.905309] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbe23000 [ 36.911093] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 36.924138] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 36.944028] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 36.949997] usb usb1: default language 0x0409 [ 36.954499] usb usb1: udev 1, busnum 1, minor = 0 [ 36.959321] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 36.966228] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 36.973639] usb usb1: Product: EHCI Host Controller [ 36.978640] usb usb1: Manufacturer: Linux 2.6.37-rc8-dt5+ ehci_hcd [ 36.984942] usb usb1: SerialNumber: 0000:00:1a.7 [ 36.989884] usb usb1: usb_probe_device [ 36.993757] usb usb1: configuration #1 chosen from 1 choice [ 36.999496] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 37.005520] hub 1-0:1.0: usb_probe_interface [ 37.009919] hub 1-0:1.0: usb_probe_interface - got id [ 37.015092] hub 1-0:1.0: USB hub found [ 37.018975] hub 1-0:1.0: 6 ports detected [ 37.023106] hub 1-0:1.0: standalone hub [ 37.027068] hub 1-0:1.0: no power switching (usb 1.0) [ 37.032241] hub 1-0:1.0: individual port over-current protection [ 37.038370] hub 1-0:1.0: power on to power good time: 20ms [ 37.044000] hub 1-0:1.0: local power source is good [ 37.049005] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 37.056071] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 37.063910] IOAPIC[0]: Set routing entry (0-23 -> 0x9a -> IRQ 23 Mode:1 Active:1) [ 37.071583] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 37.078871] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 37.084824] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 37.090175] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '002' [ 37.097846] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 37.124027] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 37.133185] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 37.142806] ehci_hcd 0000:00:1d.7: debug port 1 [ 37.147458] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 37.160491] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 37.167409] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 37.173337] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 37.173351] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbe22000 [ 37.173355] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 37.177240] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 37.188034] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 37.188107] usb usb2: default language 0x0409 [ 37.188126] usb usb2: udev 1, busnum 2, minor = 128 [ 37.188128] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 37.188129] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 37.188131] usb usb2: Product: EHCI Host Controller [ 37.188132] usb usb2: Manufacturer: Linux 2.6.37-rc8-dt5+ ehci_hcd [ 37.188133] usb usb2: SerialNumber: 0000:00:1d.7 [ 37.188306] usb usb2: usb_probe_device [ 37.188308] usb usb2: configuration #1 chosen from 1 choice [ 37.188322] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 37.188426] hub 2-0:1.0: usb_probe_interface [ 37.188427] hub 2-0:1.0: usb_probe_interface - got id [ 37.188428] hub 2-0:1.0: USB hub found [ 37.188439] hub 2-0:1.0: 6 ports detected [ 37.188440] hub 2-0:1.0: standalone hub [ 37.188441] hub 2-0:1.0: no power switching (usb 1.0) [ 37.188443] hub 2-0:1.0: individual port over-current protection [ 37.188444] hub 2-0:1.0: power on to power good time: 20ms [ 37.188454] hub 2-0:1.0: local power source is good [ 37.188456] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 37.188526] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 37.188758] uhci_hcd: USB Universal Host Controller Interface driver [ 37.327847] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 37.327907] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 37.327936] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 37.327944] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 37.327964] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '003' [ 37.327980] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 37.370614] hub 2-0:1.0: port 1: status 0501 change 0001 [ 37.404026] uhci_hcd 0000:00:1a.0: detected 2 ports [ 37.409035] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 37.415861] uhci_hcd 0000:00:1a.0: Performing full reset [ 37.421309] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 37.427193] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0c0 [ 37.433144] usb usb3: default language 0x0409 [ 37.437648] usb usb3: udev 1, busnum 3, minor = 256 [ 37.442651] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 37.449558] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 37.456969] usb usb3: Product: UHCI Host Controller [ 37.461967] usb usb3: Manufacturer: Linux 2.6.37-rc8-dt5+ uhci_hcd [ 37.468268] usb usb3: SerialNumber: 0000:00:1a.0 [ 37.473204] usb usb3: usb_probe_device [ 37.476053] hub 2-0:1.0: state 7 ports 6 chg 0002 evt 0000 [ 37.476075] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 37.490631] usb usb3: configuration #1 chosen from 1 choice [ 37.496337] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 37.502342] hub 3-0:1.0: usb_probe_interface [ 37.506733] hub 3-0:1.0: usb_probe_interface - got id [ 37.511904] hub 3-0:1.0: USB hub found [ 37.515787] hub 3-0:1.0: 2 ports detected [ 37.519922] hub 3-0:1.0: standalone hub [ 37.523881] hub 3-0:1.0: no power switching (usb 1.0) [ 37.529056] hub 3-0:1.0: individual port over-current protection [ 37.532267] ehci_hcd 0000:00:1d.7: port 1 full speed --> companion [ 37.532270] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 37.532276] hub 2-0:1.0: port 1 not reset yet, waiting 50ms [ 37.556298] hub 3-0:1.0: power on to power good time: 2ms [ 37.561826] hub 3-0:1.0: local power source is good [ 37.566827] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 37.573860] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 37.581627] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0 [ 37.587811] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 37.588048] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 37.588089] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0002 [ 37.609655] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 37.615611] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 37.620963] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '004' [ 37.628642] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4 [ 37.656030] uhci_hcd 0000:00:1a.2: detected 2 ports [ 37.661045] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 37.667869] uhci_hcd 0000:00:1a.2: Performing full reset [ 37.673321] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 37.679225] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 37.679246] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000f0a0 [ 37.679322] usb usb4: default language 0x0409 [ 37.679341] usb usb4: udev 1, busnum 4, minor = 384 [ 37.679343] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 37.679344] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 37.679346] usb usb4: Product: UHCI Host Controller [ 37.679347] usb usb4: Manufacturer: Linux 2.6.37-rc8-dt5+ uhci_hcd [ 37.679348] usb usb4: SerialNumber: 0000:00:1a.2 [ 37.679528] usb usb4: usb_probe_device [ 37.679530] usb usb4: configuration #1 chosen from 1 choice [ 37.679541] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 37.679645] hub 4-0:1.0: usb_probe_interface [ 37.679646] hub 4-0:1.0: usb_probe_interface - got id [ 37.679647] hub 4-0:1.0: USB hub found [ 37.679657] hub 4-0:1.0: 2 ports detected [ 37.679658] hub 4-0:1.0: standalone hub [ 37.679659] hub 4-0:1.0: no power switching (usb 1.0) [ 37.679660] hub 4-0:1.0: individual port over-current protection [ 37.679662] hub 4-0:1.0: power on to power good time: 2ms [ 37.679673] hub 4-0:1.0: local power source is good [ 37.679675] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 37.679716] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 37.679815] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2 [ 37.679871] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 37.679883] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 37.679886] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 37.679893] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '005' [ 37.679900] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 37.843712] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 37.876026] uhci_hcd 0000:00:1d.0: detected 2 ports [ 37.881036] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 37.887854] uhci_hcd 0000:00:1d.0: Performing full reset [ 37.893299] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 37.899174] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080 [ 37.905098] usb usb5: default language 0x0409 [ 37.909592] usb usb5: udev 1, busnum 5, minor = 512 [ 37.914591] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 37.921499] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 37.928909] usb usb5: Product: UHCI Host Controller [ 37.933909] usb usb5: Manufacturer: Linux 2.6.37-rc8-dt5+ uhci_hcd [ 37.940211] usb usb5: SerialNumber: 0000:00:1d.0 [ 37.945150] usb usb5: usb_probe_device [ 37.949025] usb usb5: configuration #1 chosen from 1 choice [ 37.954729] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 37.960727] hub 5-0:1.0: usb_probe_interface [ 37.965127] hub 5-0:1.0: usb_probe_interface - got id [ 37.970300] hub 5-0:1.0: USB hub found [ 37.974182] hub 5-0:1.0: 2 ports detected [ 37.978316] hub 5-0:1.0: standalone hub [ 37.982278] hub 5-0:1.0: no power switching (usb 1.0) [ 37.987451] hub 5-0:1.0: individual port over-current protection [ 37.993579] hub 5-0:1.0: power on to power good time: 2ms [ 37.999108] hub 5-0:1.0: local power source is good [ 38.004112] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 38.011156] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 38.018930] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 [ 38.025099] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 38.032361] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 38.038317] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 38.043676] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '006' [ 38.051356] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 38.084028] uhci_hcd 0000:00:1d.1: detected 2 ports [ 38.089035] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 38.095861] uhci_hcd 0000:00:1d.1: Performing full reset [ 38.101333] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 38.107210] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060 [ 38.113086] uhci_hcd 0000:00:1d.0: port 1 portsc 009b,00 [ 38.118523] hub 5-0:1.0: port 1: status 0101 change 0003 [ 38.118683] usb usb6: default language 0x0409 [ 38.118712] usb usb6: udev 1, busnum 6, minor = 640 [ 38.118714] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 38.118716] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 38.118718] usb usb6: Product: UHCI Host Controller [ 38.118719] usb usb6: Manufacturer: Linux 2.6.37-rc8-dt5+ uhci_hcd [ 38.118721] usb usb6: SerialNumber: 0000:00:1d.1 [ 38.118938] usb usb6: usb_probe_device [ 38.118940] usb usb6: configuration #1 chosen from 1 choice [ 38.118955] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 38.119094] hub 6-0:1.0: usb_probe_interface [ 38.119096] hub 6-0:1.0: usb_probe_interface - got id [ 38.119098] hub 6-0:1.0: USB hub found [ 38.119113] hub 6-0:1.0: 2 ports detected [ 38.119115] hub 6-0:1.0: standalone hub [ 38.119117] hub 6-0:1.0: no power switching (usb 1.0) [ 38.119118] hub 6-0:1.0: individual port over-current protection [ 38.119120] hub 6-0:1.0: power on to power good time: 2ms [ 38.119134] hub 6-0:1.0: local power source is good [ 38.119135] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 38.119192] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 38.119323] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 [ 38.119378] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 38.119393] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 38.119397] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 38.119407] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '007' [ 38.119415] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 38.220057] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 38.308033] uhci_hcd 0000:00:1d.2: detected 2 ports [ 38.313042] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 38.319868] uhci_hcd 0000:00:1d.2: Performing full reset [ 38.325315] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 38.331187] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040 [ 38.337114] usb usb7: default language 0x0409 [ 38.341614] usb usb7: udev 1, busnum 7, minor = 768 [ 38.346623] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 38.353531] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 38.360940] usb usb7: Product: UHCI Host Controller [ 38.365941] usb usb7: Manufacturer: Linux 2.6.37-rc8-dt5+ uhci_hcd [ 38.372241] usb usb7: SerialNumber: 0000:00:1d.2 [ 38.377175] usb usb7: usb_probe_device [ 38.380045] hub 5-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 38.380066] hub 5-0:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 38.392948] usb usb7: configuration #1 chosen from 1 choice [ 38.398649] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 38.404646] hub 7-0:1.0: usb_probe_interface [ 38.409041] hub 7-0:1.0: usb_probe_interface - got id [ 38.414213] hub 7-0:1.0: USB hub found [ 38.418087] hub 7-0:1.0: 2 ports detected [ 38.422221] hub 7-0:1.0: standalone hub [ 38.426182] hub 7-0:1.0: no power switching (usb 1.0) [ 38.431357] hub 7-0:1.0: individual port over-current protection [ 38.437485] hub 7-0:1.0: power on to power good time: 2ms [ 38.443014] hub 7-0:1.0: local power source is good [ 38.448016] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 38.455062] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 38.462833] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 [ 38.469103] Initializing USB Mass Storage driver... [ 38.474242] usbcore: registered new interface driver usb-storage [ 38.480374] USB Mass Storage support registered. [ 38.485268] usbcore: registered new interface driver libusual [ 38.491250] usbcore: registered new interface driver ums-alauda [ 38.492061] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 38.506064] usbcore: registered new interface driver ums-cypress [ 38.512298] usbcore: registered new interface driver ums-datafab [ 38.518536] usbcore: registered new interface driver ums-freecom [ 38.524766] usbcore: registered new interface driver ums-isd200 [ 38.530912] usbcore: registered new interface driver ums-jumpshot [ 38.537222] usbcore: registered new interface driver ums-karma [ 38.543277] usbcore: registered new interface driver ums-onetouch [ 38.549595] usbcore: registered new interface driver ums-sddr09 [ 38.555769] usbcore: registered new interface driver ums-sddr55 [ 38.561922] usbcore: registered new interface driver ums-usbat [ 38.568121] usbcore: registered new interface driver usbserial [ 38.574189] USB Serial support registered for generic [ 38.592030] usb usb3: suspend_rh (auto-stop) [ 38.628040] usb 5-1: ep0 maxpacket = 8 [ 38.649107] usb 5-1: udev 2, busnum 5, minor = 513 [ 38.654042] usb 5-1: New USB device found, idVendor=0557, idProduct=8021 [ 38.660882] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 38.668335] usb 5-1: usb_probe_device [ 38.672130] usb 5-1: configuration #1 chosen from 1 choice [ 38.680109] usb 5-1: adding 5-1:1.0 (config #1, interface 0) [ 38.686039] hub 5-1:1.0: usb_probe_interface [ 38.690463] hub 5-1:1.0: usb_probe_interface - got id [ 38.695642] hub 5-1:1.0: USB hub found [ 38.701111] hub 5-1:1.0: 4 ports detected [ 38.705259] hub 5-1:1.0: standalone hub [ 38.709226] hub 5-1:1.0: individual port power switching [ 38.714679] hub 5-1:1.0: individual port over-current protection [ 38.720817] hub 5-1:1.0: power on to power good time: 100ms [ 38.729106] hub 5-1:1.0: local power source is good [ 38.734127] hub 5-1:1.0: enabling power on all ports [ 38.743146] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '002' [ 38.750870] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 38.751027] usbcore: registered new interface driver usbserial_generic [ 38.751029] usbserial: USB Serial Driver core [ 38.751127] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter [ 38.751245] usbcore: registered new interface driver belkin [ 38.751246] belkin_sa: v1.3:USB Belkin Serial converter driver [ 38.751346] USB Serial support registered for MCT U232 [ 38.751460] usbcore: registered new interface driver mct_u232 [ 38.751461] mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver [ 38.816280] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 38.826694] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 38.831804] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 38.837417] mice: PS/2 mouse device common for all mice [ 38.840047] usb usb4: suspend_rh (auto-stop) [ 38.848414] rtc_cmos 00:08: RTC can wake from S4 [ 38.853183] hub 5-1:1.0: port 1: status 0301 change 0001 [ 38.900276] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 38.906530] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 38.913467] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 38.919516] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0460) [ 38.926798] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 38.932947] iTCO_vendor_support: vendor-support=0 [ 38.937778] SoftDog: cannot register miscdev on minor=130 (err=-16) [ 38.944182] md: linear personality registered for level -1 [ 38.949797] md: raid0 personality registered for level 0 [ 38.955229] md: raid1 personality registered for level 1 [ 38.960668] md: raid10 personality registered for level 10 [ 38.966280] md: raid6 personality registered for level 6 [ 38.971715] md: raid5 personality registered for level 5 [ 38.977149] md: raid4 personality registered for level 4 [ 38.982584] md: multipath personality registered for level -4 [ 38.988459] md: faulty personality registered for level -5 [ 38.994080] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 128, phase 0, 12 us [ 39.002131] hub 5-1:1.0: state 7 ports 4 chg 0002 evt 0000 [ 39.007955] device-mapper: uevent: version 1.0.3 [ 39.009109] hub 5-1:1.0: port 1, status 0301, change 0000, 1.5 Mb/s [ 39.019447] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com [ 39.028442] device-mapper: multipath: version 1.1.1 loaded [ 39.034063] device-mapper: multipath round-robin: version 1.0.0 loaded [ 39.040719] device-mapper: multipath queue-length: version 0.1.0 loaded [ 39.047460] device-mapper: multipath service-time: version 0.2.0 loaded [ 39.054586] device-mapper: dm-log-userspace: version 1.0.0 loaded [ 39.070781] cpuidle: using governor ladder [ 39.081097] usb 5-1.1: new low speed USB device using uhci_hcd and address 3 [ 39.102115] cpuidle: using governor menu [ 39.106174] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 39.112255] ioatdma 0000:00:16.0: can't derive routing for PCI INT A [ 39.118756] ioatdma 0000:00:16.0: PCI INT A: no GSI [ 39.123920] ioatdma 0000:00:16.0: setting latency timer to 64 [ 39.129983] ioatdma 0000:00:16.0: irq 138 for MSI/MSI-X [ 39.136488] igb 0000:01:00.0: DCA enabled [ 39.140828] igb 0000:01:00.1: DCA enabled [ 39.145049] ioatdma 0000:00:16.1: can't derive routing for PCI INT B [ 39.151571] ioatdma 0000:00:16.1: PCI INT B: no GSI [ 39.156720] ioatdma 0000:00:16.1: setting latency timer to 64 [ 39.162772] ioatdma 0000:00:16.1: irq 139 for MSI/MSI-X [ 39.168988] ioatdma 0000:00:16.2: can't derive routing for PCI INT C [ 39.175530] ioatdma 0000:00:16.2: PCI INT C: no GSI [ 39.180695] ioatdma 0000:00:16.2: setting latency timer to 64 [ 39.186810] ioatdma 0000:00:16.2: irq 140 for MSI/MSI-X [ 39.193046] ioatdma 0000:00:16.3: can't derive routing for PCI INT D [ 39.199573] ioatdma 0000:00:16.3: PCI INT D: no GSI [ 39.204717] ioatdma 0000:00:16.3: setting latency timer to 64 [ 39.210796] ioatdma 0000:00:16.3: irq 141 for MSI/MSI-X [ 39.217026] ioatdma 0000:00:16.4: can't derive routing for PCI INT A [ 39.223519] ioatdma 0000:00:16.4: PCI INT A: no GSI [ 39.228674] ioatdma 0000:00:16.4: setting latency timer to 64 [ 39.234725] ioatdma 0000:00:16.4: irq 142 for MSI/MSI-X [ 39.240145] usb 5-1.1: skipped 1 descriptor after interface [ 39.245851] usb 5-1.1: skipped 1 descriptor after interface [ 39.251590] usb 5-1.1: skipped 1 descriptor after interface [ 39.251893] ioatdma 0000:00:16.5: can't derive routing for PCI INT B [ 39.251895] ioatdma 0000:00:16.5: PCI INT B: no GSI [ 39.251935] ioatdma 0000:00:16.5: setting latency timer to 64 [ 39.252125] ioatdma 0000:00:16.5: irq 143 for MSI/MSI-X [ 39.253121] ioatdma 0000:00:16.6: can't derive routing for PCI INT C [ 39.253123] ioatdma 0000:00:16.6: PCI INT C: no GSI [ 39.253161] ioatdma 0000:00:16.6: setting latency timer to 64 [ 39.253330] ioatdma 0000:00:16.6: irq 144 for MSI/MSI-X [ 39.254305] ioatdma 0000:00:16.7: can't derive routing for PCI INT D [ 39.254307] ioatdma 0000:00:16.7: PCI INT D: no GSI [ 39.254347] ioatdma 0000:00:16.7: setting latency timer to 64 [ 39.254528] ioatdma 0000:00:16.7: irq 145 for MSI/MSI-X [ 39.256145] usbcore: registered new interface driver usbhid [ 39.256147] usbhid: USB HID core driver [ 39.256764] dell-wmi: No known WMI GUID found [ 39.256765] acer-wmi: Acer Laptop ACPI-WMI Extras [ 39.256771] acer-wmi: No or unsupported WMI interface, unable to load [ 39.257480] ALSA device list: [ 39.257482] No soundcards found. [ 39.257668] oprofile: using NMI interrupt. [ 39.336067] usb usb6: suspend_rh (auto-stop) [ 39.366095] netem: version 1.2 [ 39.369323] Netfilter messages via NETLINK v0.30. [ 39.374267] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 39.380509] usb 5-1.1: default language 0x0409 [ 39.386673] ctnetlink v0.93: registering with nfnetlink. [ 39.392206] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 39.399359] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 39.406882] xt_time: kernel timezone is -0000 [ 39.413123] ip_tables: (C) 2000-2006 Netfilter Core Team [ 39.418771] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [ 39.425362] arp_tables: (C) 2002 David S. Miller [ 39.430166] usb 5-1.1: udev 3, busnum 5, minor = 514 [ 39.430262] TCP bic registered [ 39.430264] TCP cubic registered [ 39.430266] TCP westwood registered [ 39.430268] TCP highspeed registered [ 39.430269] TCP hybla registered [ 39.430271] TCP htcp registered [ 39.430273] TCP vegas registered [ 39.430276] TCP veno registered [ 39.430278] TCP scalable registered [ 39.430281] TCP lp registered [ 39.430283] TCP yeah registered [ 39.430286] TCP illinois registered [ 39.430287] Initializing XFRM netlink socket [ 39.430322] NET: Registered protocol family 17 [ 39.430341] NET: Registered protocol family 15 [ 39.489351] usb 5-1.1: New USB device found, idVendor=0557, idProduct=2261 [ 39.489512] Bridge firewalling registered [ 39.489528] Ebtables v2.0 registered [ 39.504174] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 39.511692] usb 5-1.1: Product: CS1716A V1.0.098 [ 39.512474] PM: Hibernation image not present or could not be loaded. [ 39.512504] registered taskstats version 1 [ 39.513485] Magic number: 6:9:630 [ 39.530798] rtc_cmos 00:08: setting system clock to 2010-12-31 10:38:42 UTC (1293791922) [ 39.530815] usb 5-1.1: Manufacturer: ATEN International Co. Ltd [ 39.531082] usb 5-1.1: usb_probe_device [ 39.531084] usb 5-1.1: configuration #1 chosen from 1 choice [ 39.536104] usb 5-1.1: adding 5-1.1:1.0 (config #1, interface 0) [ 39.536321] usbserial_generic 5-1.1:1.0: usb_probe_interface [ 39.536323] usbserial_generic 5-1.1:1.0: usb_probe_interface - got id [ 39.536361] usbhid 5-1.1:1.0: usb_probe_interface [ 39.536363] usbhid 5-1.1:1.0: usb_probe_interface - got id [ 39.584092] usb usb7: suspend_rh (auto-stop) [ 39.616460] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input3 [ 39.629014] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 8, phase 4, 118 us [ 39.638881] generic-usb 0003:0557:2261.0001: input: USB HID v1.00 Keyboard [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-1.1/input0 [ 39.652781] usb 5-1.1: adding 5-1.1:1.1 (config #1, interface 1) [ 39.659229] usbserial_generic 5-1.1:1.1: usb_probe_interface [ 39.665033] usbserial_generic 5-1.1:1.1: usb_probe_interface - got id [ 39.671630] usbhid 5-1.1:1.1: usb_probe_interface [ 39.676458] usbhid 5-1.1:1.1: usb_probe_interface - got id [ 39.714483] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.1/input/input4 [ 39.726984] uhci_hcd 0000:00:1d.0: reserve dev 3 ep82-INT, period 8, phase 4, 118 us [ 39.735260] generic-usb 0003:0557:2261.0002: input: USB HID v1.00 Device [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-1.1/input1 [ 39.748900] usb 5-1.1: adding 5-1.1:1.2 (config #1, interface 2) [ 39.755345] usbserial_generic 5-1.1:1.2: usb_probe_interface [ 39.761147] usbserial_generic 5-1.1:1.2: usb_probe_interface - got id [ 39.767743] usbhid 5-1.1:1.2: usb_probe_interface [ 39.772572] usbhid 5-1.1:1.2: usb_probe_interface - got id [ 39.799553] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.2/input/input5 [ 39.812711] generic-usb 0003:0557:2261.0003: input: USB HID v1.10 Mouse [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-1.1/input2 [ 39.826506] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '003' [ 39.834256] hub 5-1:1.0: state 7 ports 4 chg 0000 evt 0002 [ 41.088151] IP-Config: Complete: [ 41.091255] device=eth0, addr=192.168.1.69, mask=255.255.255.0, gw=192.168.1.1, [ 41.099434] host=lkp-ws02, domain=, nis-domain=(none), [ 41.105258] bootserver=192.168.1.11, rootserver=192.168.1.11, rootpath= [ 41.113395] md: Waiting for all devices to be available before autodetect [ 41.120350] md: If you don't use raid, use raid=noautodetect [ 41.127205] md: Autodetecting RAID arrays. [ 41.131473] md: Scanned 0 and added 0 devices. [ 41.136065] md: autorun ... [ 41.138975] md: ... autorun DONE. [ 41.151957] VFS: Mounted root (nfs filesystem) on device 0:15. [ 41.157990] debug: unmapping init memory ffffffff81fd9000..ffffffff82298000 [ 41.294887] stty used greatest stack depth: 3184 bytes left [ 41.623757] create_static_n used greatest stack depth: 3120 bytes left [ 42.012844] net.agent used greatest stack depth: 2896 bytes left [ 42.127079] hdparm used greatest stack depth: 2848 bytes left [ 42.660972] sshd (3232): /proc/3232/oom_adj is deprecated, please use /proc/3232/oom_score_adj instead. [ 44.138003] EXT4-fs (sda1): recovery complete [ 44.142760] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 47.167911] XFS mounting filesystem sdc1 [ 47.265090] Ending clean XFS mount for filesystem: sdc1 [ 50.159191] XFS mounting filesystem sdd1 [ 50.273374] Ending clean XFS mount for filesystem: sdd1 [ 53.226283] XFS mounting filesystem sde1 [ 53.344712] Ending clean XFS mount for filesystem: sde1 [ 56.289866] XFS mounting filesystem sdf1 [ 56.387589] Ending clean XFS mount for filesystem: sdf1 [ 59.301130] XFS mounting filesystem sdg1 [ 59.397449] Ending clean XFS mount for filesystem: sdg1 [ 62.338288] XFS mounting filesystem sdh1 [ 62.462539] Ending clean XFS mount for filesystem: sdh1 [ 65.386250] XFS mounting filesystem sdi1 [ 65.485035] Ending clean XFS mount for filesystem: sdi1 [ 67.966211] XFS mounting filesystem sdj1 [ 68.032933] Ending clean XFS mount for filesystem: sdj1 [ 70.488555] XFS mounting filesystem sdk1 [ 70.563451] Ending clean XFS mount for filesystem: sdk1 [ 72.993018] XFS mounting filesystem sdl1 [ 73.058220] Ending clean XFS mount for filesystem: sdl1