[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.37-rc8-dt5+ (wfg@bee) (gcc version 4.5.0 (GCC) ) #395 SMP Fri Dec 31 09:08:10 CST 2010 [ 0.000000] Command line: run=/home/wfg/ioless-balance_dirty_pages/test-each-fs.sh debug sched_debug apic=debug panic=10 hung_task_panic=1 softlockup_panic=1 unknown_nmi_panic=1 nmi_watchdog=panic,lapic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 netconsole=@:/eth0,6666@192.168.1.11/00:30:48:fe:19:95 ip=192.168.1.69:192.168.1.11:192.168.1.1:255.255.255.0:lkp-ws02:eth0:none nfsroot=192.168.1.11:/nfsroot/wfg,tcp,v3,rsize=524288,wsize=524288 rw BOOT_IMAGE=x86_64/vmlinuz [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable) [ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf30b000 (usable) [ 0.000000] BIOS-e820: 00000000bf30b000 - 00000000bf38b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf38b000 - 00000000bf3a1000 (reserved) [ 0.000000] BIOS-e820: 00000000bf3a1000 - 00000000bf3a2000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf3a2000 - 00000000bf3b3000 (reserved) [ 0.000000] BIOS-e820: 00000000bf3b3000 - 00000000bf3b6000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf3b6000 - 00000000bf3dd000 (reserved) [ 0.000000] BIOS-e820: 00000000bf3dd000 - 00000000bf3de000 (usable) [ 0.000000] BIOS-e820: 00000000bf3de000 - 00000000bf3df000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf3df000 - 00000000bf414000 (reserved) [ 0.000000] BIOS-e820: 00000000bf414000 - 00000000bf416000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf416000 - 00000000bf418000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf418000 - 00000000bf420000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf420000 - 00000000bf421000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf421000 - 00000000bf423000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf423000 - 00000000bf42b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf42b000 - 00000000bf454000 (reserved) [ 0.000000] BIOS-e820: 00000000bf454000 - 00000000bf657000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf657000 - 00000000bf800000 (usable) [ 0.000000] BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000440000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: X8DTN/X8DTN, BIOS 4.6.3 01/06/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x440000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FC00000000 write-back [ 0.000000] 1 base 0400000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFC0000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes. [ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes. [ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [ffff8800000fcf20] fcf20 [ 0.000000] mpc: fc9f0-fcea4 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000 [ 0.000000] 0000000000 - 00bf800000 page 4k [ 0.000000] kernel direct mapping tables up to bf800000 @ 1fa00000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000440000000 [ 0.000000] 0100000000 - 0440000000 page 4k [ 0.000000] kernel direct mapping tables up to 440000000 @ bd0f9000-bf30b000 [ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 A M I) [ 0.000000] ACPI: XSDT 00000000bf421e18 0008C (v01 A M I ALASKA 01072009 MSFT 00010013) [ 0.000000] ACPI: FACP 00000000bf41fd98 000F4 (v04 A M I ALASKA 01072009 MSFT 00010013) [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20101013/tbfadt-369) [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBF420F40/0x00000000BF420E40, using 32 (20101013/tbfadt-486) [ 0.000000] ACPI: DSDT 00000000bf418018 06059 (v01 A M I ALASKA 00000001 INTL 20051117) [ 0.000000] ACPI: FACS 00000000bf420f40 00040 [ 0.000000] ACPI: APIC 00000000bf41fc18 00130 (v02 A M I ALASKA 01072009 MSFT 00010013) [ 0.000000] ACPI: SSDT 00000000bf415798 006EE (v01 AMICPU PROC 00000001 MSFT 03000001) [ 0.000000] ACPI: MCFG 00000000bf422f18 0003C (v01 A M I OEMMCFG 01072009 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000bf414c98 00228 (v01 A M I AMI SRAT 00000001 AMI. 00000000) [ 0.000000] ACPI: SLIT 00000000bf422e98 00030 (v01 A M I AMI SLIT 00000000 AMI. 00000000) [ 0.000000] ACPI: HPET 00000000bf422e18 00038 (v01 A M I ICH7HPET 01072009 AMI. 00000003) [ 0.000000] ACPI: SPMI 00000000bf422d98 00040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.000000] ACPI: EINJ 00000000bf41fa98 00130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.000000] ACPI: ERST 00000000bf414a18 00210 (v01 AMIER AMI ERST 00000000 00000000) [ 0.000000] ACPI: HEST 00000000bf414f18 000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.000000] ACPI: BERT 00000000bf422d18 00030 (v01 AMI AMI BERT 00000000 00000000) [ 0.000000] ACPI: DMAR 00000000bf415f18 000D4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x12 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x13 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x14 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x15 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x20 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x21 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x22 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x23 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x24 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x25 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x30 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x31 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x32 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x33 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x34 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x35 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 0-c0000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-240000000 [ 0.000000] SRAT: Node 1 PXM 1 240000000-440000000 [ 0.000000] SRAT: Node 0 [0,c0000000) + [100000000,240000000) -> [0,240000000) [ 0.000000] NUMA: Using 30 for the hash shift. [ 0.000000] Initmem setup node 0 0000000000000000-0000000240000000 [ 0.000000] NODE_DATA [000000023fffb000 - 000000023fffffff] [ 0.000000] Initmem setup node 1 0000000240000000-0000000440000000 [ 0.000000] NODE_DATA [000000043fffa000 - 000000043fffefff] [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237e00000-ffff88023edfffff] on node 0 [ 0.000000] [ffffea0007e00000-ffffea000edfffff] PMD -> [ffff880437e00000-ffff88043edfffff] on node 1 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00440000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009c [ 0.000000] 0: 0x00000100 -> 0x000bf30b [ 0.000000] 0: 0x000bf3dd -> 0x000bf3de [ 0.000000] 0: 0x000bf657 -> 0x000bf800 [ 0.000000] 0: 0x00100000 -> 0x00240000 [ 0.000000] 1: 0x00240000 -> 0x00440000 [ 0.000000] On node 0 totalpages: 2094145 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3918 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 765165 pages, LIFO batch:31 [ 0.000000] Normal zone: 17920 pages used for memmap [ 0.000000] Normal zone: 1292800 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 2097152 [ 0.000000] Normal zone: 28672 pages used for memmap [ 0.000000] Normal zone: 2068480 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x20] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x22] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x24] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x30] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x32] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x34] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x21] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x23] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x31] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x33] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x35] enabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec02000] gsi_base[48]) [ 0.000000] IOAPIC[2]: apic_id 3, version 32, address 0xfec02000, GSI 48-71 [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec90000] gsi_base[72]) [ 0.000000] IOAPIC[3]: apic_id 4, version 32, address 0xfec90000, GSI 72-95 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 24 CPUs, 0 hotplug CPUs [ 0.000000] mapped APIC to ffffffffff5fc000 (fee00000) [ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000) [ 0.000000] mapped IOAPIC to ffffffffff5fa000 (fec01000) [ 0.000000] mapped IOAPIC to ffffffffff5f9000 (fec02000) [ 0.000000] mapped IOAPIC to ffffffffff5f8000 (fec90000) [ 0.000000] nr_irqs_gsi: 112 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf30b000 - 00000000bf38b000 [ 0.000000] PM: Registered nosave memory: 00000000bf38b000 - 00000000bf3a1000 [ 0.000000] PM: Registered nosave memory: 00000000bf3a1000 - 00000000bf3a2000 [ 0.000000] PM: Registered nosave memory: 00000000bf3a2000 - 00000000bf3b3000 [ 0.000000] PM: Registered nosave memory: 00000000bf3b3000 - 00000000bf3b6000 [ 0.000000] PM: Registered nosave memory: 00000000bf3b6000 - 00000000bf3dd000 [ 0.000000] PM: Registered nosave memory: 00000000bf3de000 - 00000000bf3df000 [ 0.000000] PM: Registered nosave memory: 00000000bf3df000 - 00000000bf414000 [ 0.000000] PM: Registered nosave memory: 00000000bf414000 - 00000000bf416000 [ 0.000000] PM: Registered nosave memory: 00000000bf416000 - 00000000bf418000 [ 0.000000] PM: Registered nosave memory: 00000000bf418000 - 00000000bf420000 [ 0.000000] PM: Registered nosave memory: 00000000bf420000 - 00000000bf421000 [ 0.000000] PM: Registered nosave memory: 00000000bf421000 - 00000000bf423000 [ 0.000000] PM: Registered nosave memory: 00000000bf423000 - 00000000bf42b000 [ 0.000000] PM: Registered nosave memory: 00000000bf42b000 - 00000000bf454000 [ 0.000000] PM: Registered nosave memory: 00000000bf454000 - 00000000bf657000 [ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ed1c000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:24 nr_node_ids:2 [ 0.000000] PERCPU: Embedded 475 pages/cpu @ffff8800bb800000 s1916096 r8192 d21312 u2097152 [ 0.000000] pcpu-alloc: s1916096 r8192 d21312 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 12 [0] 13 [ 0.000000] pcpu-alloc: [0] 14 [0] 15 [0] 16 [0] 17 [1] 06 [1] 07 [1] 08 [1] 09 [ 0.000000] pcpu-alloc: [1] 10 [1] 11 [1] 18 [1] 19 [1] 20 [1] 21 [1] 22 [1] 23 [ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 4130363 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: run=/home/wfg/ioless-balance_dirty_pages/test-each-fs.sh debug sched_debug apic=debug panic=10 hung_task_panic=1 softlockup_panic=1 unknown_nmi_panic=1 nmi_watchdog=panic,lapic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 netconsole=@:/eth0,6666@192.168.1.11/00:30:48:fe:19:95 ip=192.168.1.69:192.168.1.11:192.168.1.1:255.255.255.0:lkp-ws02:eth0:none nfsroot=192.168.1.11:/nfsroot/wfg,tcp,v3,rsize=524288,wsize=524288 rw BOOT_IMAGE=x86_64/vmlinuz [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 16361144k/17825792k available (10752k kernel code, 1060604k absent, 404044k reserved, 5468k data, 2812k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:2096 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 6335 kB [ 0.000000] per task-struct memory footprint: 2688 bytes [ 0.000000] allocated 167772160 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] ODEBUG: 31 of 31 active objects replaced [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 2800.654 MHz processor. [ 0.000015] Calibrating delay loop (skipped), value calculated using timer frequency.. 5601.30 BogoMIPS (lpj=11202616) [ 0.010960] pid_max: default: 32768 minimum: 301 [ 0.019926] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.032802] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.041770] Mount-cache hash table entries: 256 [ 0.046909] Initializing cgroup subsys debug [ 0.051299] Initializing cgroup subsys ns [ 0.055431] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.064478] Initializing cgroup subsys cpuacct [ 0.069045] Initializing cgroup subsys memory [ 0.073562] Initializing cgroup subsys devices [ 0.078120] Initializing cgroup subsys freezer [ 0.082678] Initializing cgroup subsys blkio [ 0.087167] CPU: Physical Processor ID: 0 [ 0.091294] CPU: Processor Core ID: 0 [ 0.095076] mce: CPU supports 9 MCE banks [ 0.099210] CPU0: Thermal monitoring enabled (TM1) [ 0.104135] using mwait in idle threads. [ 0.108178] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver. [ 0.115783] ... version: 3 [ 0.119907] ... bit width: 48 [ 0.124120] ... generic registers: 4 [ 0.128246] ... value mask: 0000ffffffffffff [ 0.133669] ... max period: 000000007fffffff [ 0.139092] ... fixed-purpose events: 3 [ 0.143220] ... event mask: 000000070000000f [ 0.149735] ACPI: Core revision 20101013 [ 0.175988] ftrace: allocating 33698 entries in 133 pages [ 0.190858] Getting VERSION: 1060015 [ 0.194550] Getting VERSION: 1060015 [ 0.198241] Getting ID: 0 [ 0.200984] Getting ID: 0 [ 0.203716] Setting APIC routing to physical flat [ 0.208537] enabled ExtINT on CPU#0 [ 0.212579] ESR value before enabling vector: 0x00000040 after: 0x00000000 [ 0.219653] ENABLING IO-APIC IRQs [ 0.223085] init IO_APIC IRQs [ 0.226174] 0-0 (apicid-pin) not connected [ 0.230550] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 0.238039] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) [ 0.245527] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) [ 0.253014] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) [ 0.260495] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) [ 0.267978] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) [ 0.275460] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) [ 0.282947] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 0.290433] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0) [ 0.297915] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) [ 0.305571] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) [ 0.313226] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 0.320881] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 0.328538] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) [ 0.336192] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) [ 0.343847] 0-16 0-17 0-18 0-19 0-20 0-21 0-22 0-23 2-0 2-1 2-2 2-3 2-4 2-5 2-6 2-7 2-8 2-9 2-10 2-11 2-12 2-13 2-14 2-15 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 3-0 3-1 3-2 3-3 3-4 3-5 3-6 3-7 3-8 3-9 3-10 3-11 3-12 3-13 3-14 3-15 3-16 3-17 3-18 3-19 3-20 3-21 3-22 3-23 4-0 4-1 4-2 4-3 4-4 4-5 4-6 4-7 4-8 4-9 4-10 4-11 4-12 4-13 4-14 4-15 4-16 4-17 4-18 4-19 4-20 4-21 4-22 4-23 (apicid-pin) not connected [ 0.385501] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.431231] CPU0: Intel(R) Xeon(R) CPU X5660 @ 2.80GHz stepping 01 [ 0.438609] Using local APIC timer interrupts. [ 0.438610] calibrating APIC timer ... [ 0.551693] ... lapic delta = 833352 [ 0.555377] ... PM-Timer delta = 357950 [ 0.559320] ... PM-Timer result ok [ 0.562833] ..... delta 833352 [ 0.565998] ..... mult: 35789958 [ 0.569336] ..... calibration result: 533345 [ 0.573715] ..... CPU clock speed is 2800.0275 MHz. [ 0.578695] ..... host bus clock speed is 133.1345 MHz. [ 0.584706] lockdep: fixing up alternatives. [ 0.589187] Booting Node 0, Processors #1masked ExtINT on CPU#1 [ 0.704298] lockdep: fixing up alternatives. [ 0.708777] #2masked ExtINT on CPU#2 [ 0.820080] lockdep: fixing up alternatives. [ 0.824501] #3masked ExtINT on CPU#3 [ 0.935814] lockdep: fixing up alternatives. [ 0.940236] #4masked ExtINT on CPU#4 [ 1.051641] lockdep: fixing up alternatives. [ 1.056062] #5masked ExtINT on CPU#5 [ 1.167634] lockdep: fixing up alternatives. [ 1.172057] Ok. [ 1.174010] Booting Node 1, Processors #6masked ExtINT on CPU#6 [ 1.290791] TSC synchronization [CPU#0 -> CPU#6]: [ 1.295665] Measured 1312 cycles TSC warp between CPUs, turning off TSC clock. [ 0.012000] Marking TSC unstable due to check_tsc_sync_source failed [ 0.980644] lockdep: fixing up alternatives. [ 0.984035] #7masked ExtINT on CPU#7 [ 1.080774] lockdep: fixing up alternatives. [ 1.084033] #8masked ExtINT on CPU#8 [ 1.176716] lockdep: fixing up alternatives. [ 1.180036] #9masked ExtINT on CPU#9 [ 1.272695] lockdep: fixing up alternatives. [ 1.276036] #10masked ExtINT on CPU#10 [ 1.372669] lockdep: fixing up alternatives. [ 1.376035] #11masked ExtINT on CPU#11 [ 1.472489] lockdep: fixing up alternatives. [ 1.476034] Ok. [ 1.477989] Booting Node 0, Processors #12masked ExtINT on CPU#12 [ 1.576424] lockdep: fixing up alternatives. [ 1.580038] #13masked ExtINT on CPU#13 [ 1.672425] lockdep: fixing up alternatives. [ 1.676034] #14masked ExtINT on CPU#14 [ 1.768407] lockdep: fixing up alternatives. [ 1.772036] #15masked ExtINT on CPU#15 [ 1.864404] lockdep: fixing up alternatives. [ 1.868039] #16masked ExtINT on CPU#16 [ 1.960442] lockdep: fixing up alternatives. [ 1.964035] #17masked ExtINT on CPU#17 [ 2.056636] lockdep: fixing up alternatives. [ 2.060039] Ok. [ 2.061987] Booting Node 1, Processors #18masked ExtINT on CPU#18 [ 2.160628] lockdep: fixing up alternatives. [ 2.164032] #19masked ExtINT on CPU#19 [ 2.260539] lockdep: fixing up alternatives. [ 2.264028] #20masked ExtINT on CPU#20 [ 2.356572] lockdep: fixing up alternatives. [ 2.360033] #21masked ExtINT on CPU#21 [ 2.452608] lockdep: fixing up alternatives. [ 2.456032] #22masked ExtINT on CPU#22 [ 2.548528] lockdep: fixing up alternatives. [ 2.552029] #23 Ok. [ 0.012000] masked ExtINT on CPU#23 [ 2.648123] Brought up 24 CPUs [ 2.651291] Total of 24 processors activated (134406.16 BogoMIPS). [ 2.652049] Testing NMI watchdog ... OK. [ 2.740290] CPU0 attaching sched-domain: [ 2.744004] domain 0: span 0,12 level SIBLING [ 2.748002] groups: 0 (cpu_power = 589) 12 (cpu_power = 589) [ 2.754256] domain 1: span 0-5,12-17 level MC [ 2.760002] groups: 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) [ 2.776002] domain 2: span 0-23 level NODE [ 2.780002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 2.788305] CPU1 attaching sched-domain: [ 2.792012] domain 0: span 1,13 level SIBLING [ 2.796002] groups: 1 (cpu_power = 589) 13 (cpu_power = 589) [ 2.802256] domain 1: span 0-5,12-17 level MC [ 2.808002] groups: 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) [ 2.824301] domain 2: span 0-23 level NODE [ 2.828002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 2.836303] CPU2 attaching sched-domain: [ 2.840002] domain 0: span 2,14 level SIBLING [ 2.844002] groups: 2 (cpu_power = 589) 14 (cpu_power = 589) [ 2.851872] domain 1: span 0-5,12-17 level MC [ 2.856002] groups: 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) [ 2.872301] domain 2: span 0-23 level NODE [ 2.876002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 2.884303] CPU3 attaching sched-domain: [ 2.888002] domain 0: span 3,15 level SIBLING [ 2.892002] groups: 3 (cpu_power = 589) 15 (cpu_power = 589) [ 2.900002] domain 1: span 0-5,12-17 level MC [ 2.904002] groups: 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) [ 2.920301] domain 2: span 0-23 level NODE [ 2.924002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 2.932305] CPU4 attaching sched-domain: [ 2.936002] domain 0: span 4,16 level SIBLING [ 2.940002] groups: 4 (cpu_power = 589) 16 (cpu_power = 589) [ 2.948303] domain 1: span 0-5,12-17 level MC [ 2.952002] groups: 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) [ 2.968301] domain 2: span 0-23 level NODE [ 2.972002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 2.980303] CPU5 attaching sched-domain: [ 2.984002] domain 0: span 5,17 level SIBLING [ 2.988002] groups: 5 (cpu_power = 589) 17 (cpu_power = 589) [ 2.996301] domain 1: span 0-5,12-17 level MC [ 3.000002] groups: 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) [ 3.016301] domain 2: span 0-23 level NODE [ 3.020002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.028304] CPU6 attaching sched-domain: [ 3.032002] domain 0: span 6,18 level SIBLING [ 3.038299] groups: 6 (cpu_power = 589) 18 (cpu_power = 589) [ 3.044301] domain 1: span 6-11,18-23 level MC [ 3.048002] groups: 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) [ 3.064301] domain 2: span 0-23 level NODE [ 3.070032] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.078086] CPU7 attaching sched-domain: [ 3.080002] domain 0: span 7,19 level SIBLING [ 3.086298] groups: 7 (cpu_power = 589) 19 (cpu_power = 589) [ 3.092302] domain 1: span 6-11,18-23 level MC [ 3.096002] groups: 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) [ 3.114083] domain 2: span 0-23 level NODE [ 3.118039] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.126085] CPU8 attaching sched-domain: [ 3.128002] domain 0: span 8,20 level SIBLING [ 3.134299] groups: 8 (cpu_power = 589) 20 (cpu_power = 589) [ 3.140301] domain 1: span 6-11,18-23 level MC [ 3.146387] groups: 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) [ 3.162576] domain 2: span 0-23 level NODE [ 3.166038] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.175012] CPU9 attaching sched-domain: [ 3.176002] domain 0: span 9,21 level SIBLING [ 3.182299] groups: 9 (cpu_power = 589) 21 (cpu_power = 589) [ 3.189929] domain 1: span 6-11,18-23 level MC [ 3.194384] groups: 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) [ 3.210578] domain 2: span 0-23 level NODE [ 3.214040] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.223012] CPU10 attaching sched-domain: [ 3.224002] domain 0: span 10,22 level SIBLING [ 3.232002] groups: 10 (cpu_power = 589) 22 (cpu_power = 589) [ 3.238258] domain 1: span 6-11,18-23 level MC [ 3.242384] groups: 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) [ 3.258576] domain 2: span 0-23 level NODE [ 3.264002] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.272304] CPU11 attaching sched-domain: [ 3.276002] domain 0: span 11,23 level SIBLING [ 3.280002] groups: 11 (cpu_power = 589) 23 (cpu_power = 589) [ 3.286259] domain 1: span 6-11,18-23 level MC [ 3.292002] groups: 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) [ 3.308303] domain 2: span 0-23 level NODE [ 3.312002] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.320304] CPU12 attaching sched-domain: [ 3.324002] domain 0: span 0,12 level SIBLING [ 3.328002] groups: 12 (cpu_power = 589) 0 (cpu_power = 589) [ 3.336002] domain 1: span 0-5,12-17 level MC [ 3.340002] groups: 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) [ 3.356302] domain 2: span 0-23 level NODE [ 3.360002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.368303] CPU13 attaching sched-domain: [ 3.372002] domain 0: span 1,13 level SIBLING [ 3.376002] groups: 13 (cpu_power = 589) 1 (cpu_power = 589) [ 3.384301] domain 1: span 0-5,12-17 level MC [ 3.388002] groups: 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) [ 3.404302] domain 2: span 0-23 level NODE [ 3.408002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.416304] CPU14 attaching sched-domain: [ 3.420002] domain 0: span 2,14 level SIBLING [ 3.426301] groups: 14 (cpu_power = 589) 2 (cpu_power = 589) [ 3.432302] domain 1: span 0-5,12-17 level MC [ 3.436002] groups: 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) [ 3.452303] domain 2: span 0-23 level NODE [ 3.456002] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.464303] CPU15 attaching sched-domain: [ 3.468002] domain 0: span 3,15 level SIBLING [ 3.474298] groups: 15 (cpu_power = 589) 3 (cpu_power = 589) [ 3.480301] domain 1: span 0-5,12-17 level MC [ 3.484002] groups: 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) [ 3.500301] domain 2: span 0-23 level NODE [ 3.506039] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.514087] CPU16 attaching sched-domain: [ 3.516002] domain 0: span 4,16 level SIBLING [ 3.522301] groups: 16 (cpu_power = 589) 4 (cpu_power = 589) [ 3.528303] domain 1: span 0-5,12-17 level MC [ 3.532002] groups: 4,16 (cpu_power = 1178) 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) [ 3.548301] domain 2: span 0-23 level NODE [ 3.554039] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.562085] CPU17 attaching sched-domain: [ 3.564002] domain 0: span 5,17 level SIBLING [ 3.570299] groups: 17 (cpu_power = 589) 5 (cpu_power = 589) [ 3.576301] domain 1: span 0-5,12-17 level MC [ 3.582299] groups: 5,17 (cpu_power = 1178) 0,12 (cpu_power = 1178) 1,13 (cpu_power = 1178) 2,14 (cpu_power = 1178) 3,15 (cpu_power = 1178) 4,16 (cpu_power = 1178) [ 3.598077] domain 2: span 0-23 level NODE [ 3.602039] groups: 0-5,12-17 (cpu_power = 7068) 6-11,18-23 (cpu_power = 7068) [ 3.612004] CPU18 attaching sched-domain: [ 3.616002] domain 0: span 6,18 level SIBLING [ 3.620002] groups: 18 (cpu_power = 589) 6 (cpu_power = 589) [ 3.626170] domain 1: span 6-11,18-23 level MC [ 3.632001] groups: 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) [ 3.648301] domain 2: span 0-23 level NODE [ 3.652001] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.660304] CPU19 attaching sched-domain: [ 3.664002] domain 0: span 7,19 level SIBLING [ 3.668001] groups: 19 (cpu_power = 589) 7 (cpu_power = 589) [ 3.676002] domain 1: span 6-11,18-23 level MC [ 3.680001] groups: 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) [ 3.696301] domain 2: span 0-23 level NODE [ 3.700002] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.708306] CPU20 attaching sched-domain: [ 3.712002] domain 0: span 8,20 level SIBLING [ 3.718301] groups: 20 (cpu_power = 589) 8 (cpu_power = 589) [ 3.724303] domain 1: span 6-11,18-23 level MC [ 3.728001] groups: 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) [ 3.744301] domain 2: span 0-23 level NODE [ 3.750042] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.758085] CPU21 attaching sched-domain: [ 3.760002] domain 0: span 9,21 level SIBLING [ 3.766298] groups: 21 (cpu_power = 589) 9 (cpu_power = 589) [ 3.772301] domain 1: span 6-11,18-23 level MC [ 3.776002] groups: 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) [ 3.794082] domain 2: span 0-23 level NODE [ 3.798039] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.806086] CPU22 attaching sched-domain: [ 3.808002] domain 0: span 10,22 level SIBLING [ 3.814387] groups: 22 (cpu_power = 589) 10 (cpu_power = 589) [ 3.821927] domain 1: span 6-11,18-23 level MC [ 3.826387] groups: 10,22 (cpu_power = 1178) 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) [ 3.842576] domain 2: span 0-23 level NODE [ 3.846040] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.855012] CPU23 attaching sched-domain: [ 3.856002] domain 0: span 11,23 level SIBLING [ 3.864002] groups: 23 (cpu_power = 589) 11 (cpu_power = 589) [ 3.870257] domain 1: span 6-11,18-23 level MC [ 3.874384] groups: 11,23 (cpu_power = 1178) 6,18 (cpu_power = 1178) 7,19 (cpu_power = 1178) 8,20 (cpu_power = 1178) 9,21 (cpu_power = 1178) 10,22 (cpu_power = 1178) [ 3.890663] domain 2: span 0-23 level NODE [ 3.896002] groups: 6-11,18-23 (cpu_power = 7068) 0-5,12-17 (cpu_power = 7068) [ 3.905075] kworker/u:0 used greatest stack depth: 6080 bytes left [ 3.911810] kworker/u:0 used greatest stack depth: 5400 bytes left [ 3.928670] xor: automatically using best checksumming function: generic_sse [ 3.951947] generic_sse: 10591.000 MB/sec [ 3.956002] xor: using function: generic_sse (10591.000 MB/sec) [ 3.962438] Time: 10:47:09 Date: 12/31/10 [ 3.964247] NET: Registered protocol family 16 [ 3.972610] ACPI: bus type pci registered [ 3.977056] dca service started, version 1.12.1 [ 3.982054] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) [ 3.988005] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820 [ 4.079833] PCI: Using configuration type 1 for base access [ 4.118792] bio: create slab at 0 [ 4.191968] raid6: int64x1 2306 MB/s [ 4.259955] raid6: int64x2 2895 MB/s [ 4.327953] raid6: int64x4 2270 MB/s [ 4.395953] raid6: int64x8 2253 MB/s [ 4.463958] raid6: sse2x1 6865 MB/s [ 4.531955] raid6: sse2x2 8047 MB/s [ 4.599953] raid6: sse2x4 8889 MB/s [ 4.600002] raid6: using algorithm sse2x4 (8889 MB/s) [ 4.614665] ACPI: EC: Look up EC in DSDT [ 4.620531] \_SB_:_OSC evaluation returned wrong type [ 4.624003] _OSC request data:1 6 [ 4.634609] ACPI: Executed 1 blocks of module-level executable AML code [ 4.692314] ACPI: SSDT 00000000bf416018 01494 (v01 AMI IST 00000001 MSFT 03000001) [ 4.704882] ACPI: Dynamic OEM Table Load: [ 4.708302] ACPI: SSDT (null) 01494 (v01 AMI IST 00000001 MSFT 03000001) [ 4.733337] ACPI: Interpreter enabled [ 4.736005] ACPI: (supports S0 S4 S5) [ 4.741094] ACPI: Using IOAPIC for interrupt routing [ 4.748262] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 4.760158] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 4.769530] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 4.778333] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 4.786132] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 4.812307] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) [ 4.824589] ACPI: No dock devices found. [ 4.828004] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 4.840632] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 4.848328] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 4.852005] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 4.860003] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 4.868003] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff] [ 4.876035] pci 0000:00:00.0: [8086:3406] type 0 class 0x000600 [ 4.880074] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 4.888006] pci 0000:00:00.0: PME# disabled [ 4.892029] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604 [ 4.896067] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 4.904005] pci 0000:00:01.0: PME# disabled [ 4.908030] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604 [ 4.916066] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 4.920004] pci 0000:00:03.0: PME# disabled [ 4.924034] pci 0000:00:05.0: [8086:340c] type 1 class 0x000604 [ 4.932067] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 4.936005] pci 0000:00:05.0: PME# disabled [ 4.940033] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604 [ 4.948067] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 4.952005] pci 0000:00:07.0: PME# disabled [ 4.960030] pci 0000:00:09.0: [8086:3410] type 1 class 0x000604 [ 4.964066] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 4.972004] pci 0000:00:09.0: PME# disabled [ 4.976035] pci 0000:00:13.0: [8086:342d] type 0 class 0x000800 [ 4.980016] pci 0000:00:13.0: reg 10: [mem 0xfbe24000-0xfbe24fff] [ 4.988064] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 4.992004] pci 0000:00:13.0: PME# disabled [ 4.996028] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800 [ 5.004091] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800 [ 5.008090] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800 [ 5.016084] pci 0000:00:14.3: [8086:3438] type 0 class 0x000800 [ 5.024087] pci 0000:00:16.0: [8086:3430] type 0 class 0x000880 [ 5.028018] pci 0000:00:16.0: reg 10: [mem 0xfbe1c000-0xfbe1ffff 64bit] [ 5.036090] pci 0000:00:16.1: [8086:3431] type 0 class 0x000880 [ 5.040018] pci 0000:00:16.1: reg 10: [mem 0xfbe18000-0xfbe1bfff 64bit] [ 5.048087] pci 0000:00:16.2: [8086:3432] type 0 class 0x000880 [ 5.056013] pci 0000:00:16.2: reg 10: [mem 0xfbe14000-0xfbe17fff 64bit] [ 5.060087] pci 0000:00:16.3: [8086:3433] type 0 class 0x000880 [ 5.068017] pci 0000:00:16.3: reg 10: [mem 0xfbe10000-0xfbe13fff 64bit] [ 5.072090] pci 0000:00:16.4: [8086:3429] type 0 class 0x000880 [ 5.080019] pci 0000:00:16.4: reg 10: [mem 0xfbe0c000-0xfbe0ffff 64bit] [ 5.088090] pci 0000:00:16.5: [8086:342a] type 0 class 0x000880 [ 5.092017] pci 0000:00:16.5: reg 10: [mem 0xfbe08000-0xfbe0bfff 64bit] [ 5.100087] pci 0000:00:16.6: [8086:342b] type 0 class 0x000880 [ 5.104018] pci 0000:00:16.6: reg 10: [mem 0xfbe04000-0xfbe07fff 64bit] [ 5.112087] pci 0000:00:16.7: [8086:342c] type 0 class 0x000880 [ 5.120017] pci 0000:00:16.7: reg 10: [mem 0xfbe00000-0xfbe03fff 64bit] [ 5.124095] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03 [ 5.132059] pci 0000:00:1a.0: reg 20: [io 0xf0c0-0xf0df] [ 5.136061] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03 [ 5.144058] pci 0000:00:1a.2: reg 20: [io 0xf0a0-0xf0bf] [ 5.148075] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03 [ 5.156028] pci 0000:00:1a.7: reg 10: [mem 0xfbe23000-0xfbe233ff] [ 5.160097] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 5.168005] pci 0000:00:1a.7: PME# disabled [ 5.172028] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604 [ 5.176077] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 5.184005] pci 0000:00:1c.0: PME# disabled [ 5.188035] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604 [ 5.196077] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 5.200005] pci 0000:00:1c.4: PME# disabled [ 5.204035] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03 [ 5.212058] pci 0000:00:1d.0: reg 20: [io 0xf080-0xf09f] [ 5.216060] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03 [ 5.224058] pci 0000:00:1d.1: reg 20: [io 0xf060-0xf07f] [ 5.228062] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03 [ 5.236058] pci 0000:00:1d.2: reg 20: [io 0xf040-0xf05f] [ 5.240072] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03 [ 5.244028] pci 0000:00:1d.7: reg 10: [mem 0xfbe22000-0xfbe223ff] [ 5.252097] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 5.260006] pci 0000:00:1d.7: PME# disabled [ 5.264029] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 5.268077] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601 [ 5.276098] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO [ 5.284005] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO [ 5.292004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0600 (mask 00ff) [ 5.300004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f) [ 5.308005] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 001f) [ 5.316004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0ca0 (mask 000f) [ 5.324053] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106 [ 5.328026] pci 0000:00:1f.2: reg 10: [io 0xf110-0xf117] [ 5.336011] pci 0000:00:1f.2: reg 14: [io 0xf100-0xf103] [ 5.340011] pci 0000:00:1f.2: reg 18: [io 0xf0f0-0xf0f7] [ 5.344011] pci 0000:00:1f.2: reg 1c: [io 0xf0e0-0xf0e3] [ 5.352011] pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f] [ 5.356011] pci 0000:00:1f.2: reg 24: [mem 0xfbe21000-0xfbe217ff] [ 5.364047] pci 0000:00:1f.2: PME# supported from D3hot [ 5.368005] pci 0000:00:1f.2: PME# disabled [ 5.372023] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05 [ 5.380020] pci 0000:00:1f.3: reg 10: [mem 0xfbe20000-0xfbe200ff 64bit] [ 5.384029] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f] [ 5.392108] pci 0000:01:00.0: [8086:10c9] type 0 class 0x000200 [ 5.396017] pci 0000:01:00.0: reg 10: [mem 0xfbaa0000-0xfbabffff] [ 5.404013] pci 0000:01:00.0: reg 14: [mem 0xfba80000-0xfba9ffff] [ 5.408012] pci 0000:01:00.0: reg 18: [io 0xe020-0xe03f] [ 5.416012] pci 0000:01:00.0: reg 1c: [mem 0xfbb44000-0xfbb47fff] [ 5.420032] pci 0000:01:00.0: reg 30: [mem 0xfba60000-0xfba7ffff pref] [ 5.428040] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 5.436005] pci 0000:01:00.0: PME# disabled [ 5.440048] pci 0000:01:00.1: [8086:10c9] type 0 class 0x000200 [ 5.444016] pci 0000:01:00.1: reg 10: [mem 0xfba40000-0xfba5ffff] [ 5.452012] pci 0000:01:00.1: reg 14: [mem 0xfba20000-0xfba3ffff] [ 5.456012] pci 0000:01:00.1: reg 18: [io 0xe000-0xe01f] [ 5.464012] pci 0000:01:00.1: reg 1c: [mem 0xfbb40000-0xfbb43fff] [ 5.468032] pci 0000:01:00.1: reg 30: [mem 0xfba00000-0xfba1ffff pref] [ 5.476039] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 5.480005] pci 0000:01:00.1: PME# disabled [ 5.484021] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 5.492005] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 5.496005] pci 0000:00:01.0: bridge window [mem 0xfba00000-0xfbbfffff] [ 5.504007] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.512053] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 5.520006] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled) [ 5.524005] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 5.532007] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.540052] pci 0000:00:05.0: PCI bridge to [bus 04-04] [ 5.548005] pci 0000:00:05.0: bridge window [io 0xf000-0x0000] (disabled) [ 5.556005] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 5.564007] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.572053] pci 0000:00:07.0: PCI bridge to [bus 05-05] [ 5.576005] pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled) [ 5.584005] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 5.592007] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.600061] pci 0000:06:00.0: [8086:0329] type 1 class 0x000604 [ 5.604023] pci 0000:06:00.0: PXH quirk detected; SHPC device MSI disabled [ 5.612065] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 5.620004] pci 0000:06:00.0: PME# disabled [ 5.624031] pci 0000:06:00.2: [8086:032a] type 1 class 0x000604 [ 5.628022] pci 0000:06:00.2: PXH quirk detected; SHPC device MSI disabled [ 5.636064] pci 0000:06:00.2: PME# supported from D0 D3hot D3cold [ 5.644005] pci 0000:06:00.2: PME# disabled [ 5.648022] pci 0000:00:09.0: PCI bridge to [bus 06-08] [ 5.652005] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 5.660005] pci 0000:00:09.0: bridge window [mem 0xfb700000-0xfb9fffff] [ 5.664007] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.672090] pci 0000:06:00.0: PCI bridge to [bus 07-07] [ 5.680005] pci 0000:06:00.0: bridge window [io 0xf000-0x0000] (disabled) [ 5.688005] pci 0000:06:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 5.696007] pci 0000:06:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.704060] pci 0000:08:01.0: [8086:1229] type 0 class 0x000200 [ 5.708021] pci 0000:08:01.0: reg 10: [mem 0xfb900000-0xfb900fff] [ 5.716013] pci 0000:08:01.0: reg 14: [io 0xd000-0xd03f] [ 5.720013] pci 0000:08:01.0: reg 18: [mem 0xfb800000-0xfb8fffff] [ 5.728043] pci 0000:08:01.0: reg 30: [mem 0xfb700000-0xfb7fffff pref] [ 5.732024] pci 0000:08:01.0: supports D1 D2 [ 5.736002] pci 0000:08:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 5.744015] pci 0000:08:01.0: PME# disabled [ 5.748060] pci 0000:06:00.2: PCI bridge to [bus 08-08] [ 5.752005] pci 0000:06:00.2: bridge window [io 0xd000-0xdfff] [ 5.760005] pci 0000:06:00.2: bridge window [mem 0xfb700000-0xfb9fffff] [ 5.768007] pci 0000:06:00.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.776086] pci 0000:09:00.0: [1000:0058] type 0 class 0x000100 [ 5.780019] pci 0000:09:00.0: reg 10: [io 0xc000-0xc0ff] [ 5.788021] pci 0000:09:00.0: reg 14: [mem 0xfb610000-0xfb613fff 64bit] [ 5.792021] pci 0000:09:00.0: reg 1c: [mem 0xfb600000-0xfb60ffff 64bit] [ 5.800025] pci 0000:09:00.0: reg 30: [mem 0xfb400000-0xfb5fffff pref] [ 5.808039] pci 0000:09:00.0: supports D1 D2 [ 5.812021] pci 0000:00:1c.0: PCI bridge to [bus 09-09] [ 5.816005] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff] [ 5.824005] pci 0000:00:1c.0: bridge window [mem 0xfb400000-0xfb6fffff] [ 5.832008] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.840079] pci 0000:0a:00.0: [197b:2368] type 0 class 0x000101 [ 5.844036] pci 0000:0a:00.0: reg 10: [io 0xb040-0xb047] [ 5.852017] pci 0000:0a:00.0: reg 14: [io 0xb030-0xb033] [ 5.856017] pci 0000:0a:00.0: reg 18: [io 0xb020-0xb027] [ 5.860017] pci 0000:0a:00.0: reg 1c: [io 0xb010-0xb013] [ 5.868017] pci 0000:0a:00.0: reg 20: [io 0xb000-0xb00f] [ 5.872032] pci 0000:0a:00.0: reg 30: [mem 0xfbd00000-0xfbd0ffff pref] [ 5.880065] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a] [ 5.884005] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 5.892005] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff] [ 5.896008] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 5.904047] pci 0000:0b:01.0: [1002:515e] type 0 class 0x000300 [ 5.912023] pci 0000:0b:01.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] [ 5.920014] pci 0000:0b:01.0: reg 14: [io 0xa000-0xa0ff] [ 5.924013] pci 0000:0b:01.0: reg 18: [mem 0xfbc20000-0xfbc2ffff] [ 5.932045] pci 0000:0b:01.0: reg 30: [mem 0xfbc00000-0xfbc1ffff pref] [ 5.936026] pci 0000:0b:01.0: supports D1 D2 [ 5.940063] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] (subtractive decode) [ 5.948005] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 5.956005] pci 0000:00:1e.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 5.960008] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 5.968003] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 5.976003] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 5.984003] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 5.996003] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) [ 6.004046] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 6.012797] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 6.016298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 6.024172] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 6.032239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT] [ 6.036148] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9.PXHA._PRT] [ 6.044218] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9.PXHB._PRT] [ 6.116988] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 6.127238] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 6.135235] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 6.143006] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 6.150772] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 6.158769] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 6.167005] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 6.175003] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15) [ 6.182896] vgaarb: device added: PCI:0000:0b:01.0,decodes=io+mem,owns=io+mem,locks=none [ 6.188006] vgaarb: loaded [ 6.192473] SCSI subsystem initialized [ 6.199094] libata version 3.00 loaded. [ 6.203299] usbcore: registered new interface driver usbfs [ 6.209395] usbcore: registered new interface driver hub [ 6.214950] usbcore: registered new device driver usb [ 6.220485] wmi: Mapper loaded [ 6.224305] Advanced Linux Sound Architecture Driver Version 1.0.23. [ 6.228004] PCI: Using ACPI for IRQ routing [ 6.232003] PCI: pci_cache_line_size set to 64 bytes [ 6.240291] reserve RAM buffer: 000000000009c400 - 000000000009ffff [ 6.244004] reserve RAM buffer: 00000000bf30b000 - 00000000bfffffff [ 6.252019] reserve RAM buffer: 00000000bf3de000 - 00000000bfffffff [ 6.256013] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff [ 6.266423] [ 6.266423] printing PIC contents [ 6.272006] ... PIC IMR: ffff [ 6.275167] ... PIC IRR: 0c20 [ 6.276003] ... PIC ISR: 0000 [ 6.280004] ... PIC ELCR: 0c20 [ 6.284004] printing local APIC contents on CPU#0/0: [ 6.288000] ... APIC ID: 00000000 (0) [ 6.288000] ... APIC VERSION: 01060015 [ 6.288000] ... APIC TASKPRI: 00000000 (00) [ 6.288000] ... APIC PROCPRI: 00000000 [ 6.288000] ... APIC LDR: 01000000 [ 6.288000] ... APIC DFR: ffffffff [ 6.288000] ... APIC SPIV: 000001ff [ 6.288000] ... APIC ISR field: [ 6.288000] 0000000000000000000000000000000000000000000000000000000000000000 [ 6.288000] ... APIC TMR field: [ 6.288000] 0000000000000000000000000000000000000000000000000000000000000000 [ 6.288000] ... APIC IRR field: [ 6.288000] 0000000000000000000000000000000000000000000000000000000000008000 [ 6.288000] ... APIC ESR: 00000000 [ 6.288000] ... APIC ICR: 000000fd [ 6.288000] ... APIC ICR2: 01000000 [ 6.288000] ... APIC LVTT: 000200ef [ 6.288000] ... APIC LVTPC: 00000400 [ 6.288000] ... APIC LVT0: 00010700 [ 6.288000] ... APIC LVT1: 00000400 [ 6.288000] ... APIC LVTERR: 000000fe [ 6.288000] ... APIC TMICT: 00008236 [ 6.288000] ... APIC TMCCT: 00000340 [ 6.288000] ... APIC TDCR: 00000003 [ 6.288000] [ 6.287995] number of MP IRQ sources: 15. [ 6.292002] number of IO-APIC #0 registers: 24. [ 6.296002] number of IO-APIC #2 registers: 24. [ 6.300002] number of IO-APIC #3 registers: 24. [ 6.304002] number of IO-APIC #4 registers: 24. [ 6.308002] testing the IO APIC....................... [ 6.316008] [ 6.317608] IO APIC #0...... [ 6.320002] .... register #00: 00000000 [ 6.324002] ....... : physical APIC id: 00 [ 6.328002] ....... : Delivery Type: 0 [ 6.332002] ....... : LTS : 0 [ 6.336002] .... register #01: 00170020 [ 6.340002] ....... : max redirection entries: 0017 [ 6.344002] ....... : PRQ implemented: 0 [ 6.348002] ....... : IO APIC version: 0020 [ 6.356002] .... IRQ redirection table: [ 6.360002] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 6.364005] 00 000 1 0 0 0 0 0 0 00 [ 6.368005] 01 000 0 0 0 0 0 0 0 31 [ 6.376005] 02 000 0 0 0 0 0 0 0 30 [ 6.380005] 03 000 0 0 0 0 0 0 0 33 [ 6.387341] 04 000 0 0 0 0 0 0 0 34 [ 6.392005] 05 000 0 0 0 0 0 0 0 35 [ 6.396005] 06 000 0 0 0 0 0 0 0 36 [ 6.403342] 07 000 0 0 0 0 0 0 0 37 [ 6.408005] 08 000 0 0 0 0 0 0 0 38 [ 6.412005] 09 000 0 1 0 0 0 0 0 39 [ 6.419340] 0a 000 0 0 0 0 0 0 0 3A [ 6.424005] 0b 000 0 0 0 0 0 0 0 3B [ 6.428005] 0c 000 0 0 0 0 0 0 0 3C [ 6.436005] 0d 000 0 0 0 0 0 0 0 3D [ 6.440005] 0e 000 0 0 0 0 0 0 0 3E [ 6.444006] 0f 000 0 0 0 0 0 0 0 3F [ 6.452005] 10 000 1 0 0 0 0 0 0 00 [ 6.456005] 11 000 1 0 0 0 0 0 0 00 [ 6.460005] 12 000 1 0 0 0 0 0 0 00 [ 6.468005] 13 000 1 0 0 0 0 0 0 00 [ 6.472005] 14 000 1 0 0 0 0 0 0 00 [ 6.479342] 15 072 1 0 0 0 0 0 2 62 [ 6.484005] 16 000 1 0 0 0 0 0 0 00 [ 6.488005] 17 000 1 0 0 0 0 0 0 00 [ 6.495339] [ 6.496002] IO APIC #2...... [ 6.500002] .... register #00: 02000000 [ 6.504002] ....... : physical APIC id: 02 [ 6.508006] ....... : Delivery Type: 0 [ 6.512002] ....... : LTS : 0 [ 6.516002] .... register #01: 00178020 [ 6.520002] ....... : max redirection entries: 0017 [ 6.524002] ....... : PRQ implemented: 1 [ 6.528002] ....... : IO APIC version: 0020 [ 6.532002] .... register #02: 02000000 [ 6.536002] ....... : arbitration: 02 [ 6.540002] .... register #03: 00000001 [ 6.544002] ....... : Boot DT : 1 [ 6.548002] .... IRQ redirection table: [ 6.552002] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 6.560003] 00 000 1 0 0 0 0 0 0 00 [ 6.564003] 01 000 1 0 0 0 0 0 0 00 [ 6.571340] 02 000 1 0 0 0 0 0 0 00 [ 6.576003] 03 000 1 0 0 0 0 0 0 00 [ 6.580003] 04 000 1 0 0 0 0 0 0 00 [ 6.587340] 05 000 1 0 0 0 0 0 0 00 [ 6.592003] 06 000 1 0 0 0 0 0 0 00 [ 6.596003] 07 000 1 0 0 0 0 0 0 00 [ 6.604003] 08 000 1 0 0 0 0 0 0 00 [ 6.608003] 09 000 1 0 0 0 0 0 0 00 [ 6.612003] 0a 000 1 0 0 0 0 0 0 00 [ 6.620003] 0b 000 1 0 0 0 0 0 0 00 [ 6.624003] 0c 000 1 0 0 0 0 0 0 00 [ 6.628003] 0d 000 1 0 0 0 0 0 0 00 [ 6.636003] 0e 000 1 0 0 0 0 0 0 00 [ 6.640003] 0f 000 1 0 0 0 0 0 0 00 [ 6.647341] 10 000 1 0 0 0 0 0 0 00 [ 6.652003] 11 000 1 0 0 0 0 0 0 00 [ 6.656003] 12 000 1 0 0 0 0 0 0 00 [ 6.663341] 13 000 1 0 0 0 0 0 0 00 [ 6.668003] 14 000 1 0 0 0 0 0 0 00 [ 6.672003] 15 000 1 0 0 0 0 0 0 00 [ 6.679339] 16 000 1 0 0 0 0 0 0 00 [ 6.684003] 17 000 1 0 0 0 0 0 0 00 [ 6.688005] [ 6.692002] IO APIC #3...... [ 6.694992] .... register #00: 03000000 [ 6.696002] ....... : physical APIC id: 03 [ 6.700003] ....... : Delivery Type: 0 [ 6.704002] ....... : LTS : 0 [ 6.708002] .... register #01: 00178020 [ 6.712002] ....... : max redirection entries: 0017 [ 6.720002] ....... : PRQ implemented: 1 [ 6.724002] ....... : IO APIC version: 0020 [ 6.728002] .... register #02: 03000000 [ 6.732002] ....... : arbitration: 03 [ 6.736002] .... register #03: 00000001 [ 6.740002] ....... : Boot DT : 1 [ 6.744002] .... IRQ redirection table: [ 6.748002] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 6.752003] 00 000 1 0 0 0 0 0 0 00 [ 6.760003] 01 000 1 0 0 0 0 0 0 00 [ 6.764003] 02 000 1 0 0 0 0 0 0 00 [ 6.772003] 03 000 1 0 0 0 0 0 0 00 [ 6.776003] 04 000 1 0 0 0 0 0 0 00 [ 6.780003] 05 000 1 0 0 0 0 0 0 00 [ 6.788003] 06 000 1 0 0 0 0 0 0 00 [ 6.792003] 07 000 1 0 0 0 0 0 0 00 [ 6.796003] 08 000 1 0 0 0 0 0 0 00 [ 6.804003] 09 000 1 0 0 0 0 0 0 00 [ 6.808003] 0a 000 1 0 0 0 0 0 0 00 [ 6.815340] 0b 000 1 0 0 0 0 0 0 00 [ 6.820003] 0c 000 1 0 0 0 0 0 0 00 [ 6.824003] 0d 000 1 0 0 0 0 0 0 00 [ 6.831340] 0e 000 1 0 0 0 0 0 0 00 [ 6.836003] 0f 000 1 0 0 0 0 0 0 00 [ 6.840003] 10 000 1 0 0 0 0 0 0 00 [ 6.847338] 11 000 1 0 0 0 0 0 0 00 [ 6.852003] 12 000 1 0 0 0 0 0 0 00 [ 6.856003] 13 000 1 0 0 0 0 0 0 00 [ 6.864003] 14 000 1 0 0 0 0 0 0 00 [ 6.868003] 15 000 1 0 0 0 0 0 0 00 [ 6.872003] 16 000 1 0 0 0 0 0 0 00 [ 6.880003] 17 000 1 0 0 0 0 0 0 00 [ 6.884005] [ 6.885607] IO APIC #4...... [ 6.888002] .... register #00: 04000000 [ 6.892002] ....... : physical APIC id: 04 [ 6.896002] ....... : Delivery Type: 0 [ 6.900002] ....... : LTS : 0 [ 6.904002] .... register #01: 00170020 [ 6.908002] ....... : max redirection entries: 0017 [ 6.916002] ....... : PRQ implemented: 0 [ 6.920002] ....... : IO APIC version: 0020 [ 6.924002] .... register #02: 00000000 [ 6.928002] ....... : arbitration: 00 [ 6.932002] .... register #03: 00000001 [ 6.936002] ....... : Boot DT : 1 [ 6.940002] .... IRQ redirection table: [ 6.944002] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 6.948004] 00 000 1 0 0 0 0 0 0 00 [ 6.956004] 01 000 1 0 0 0 0 0 0 00 [ 6.960003] 02 000 1 0 0 0 0 0 0 00 [ 6.964004] 03 000 1 0 0 0 0 0 0 00 [ 6.972003] 04 000 1 0 0 0 0 0 0 00 [ 6.976003] 05 000 1 0 0 0 0 0 0 00 [ 6.980004] 06 000 1 0 0 0 0 0 0 00 [ 6.988003] 07 000 1 0 0 0 0 0 0 00 [ 6.992003] 08 000 1 0 0 0 0 0 0 00 [ 6.999340] 09 000 1 0 0 0 0 0 0 00 [ 7.004003] 0a 000 1 0 0 0 0 0 0 00 [ 7.008003] 0b 000 1 0 0 0 0 0 0 00 [ 7.015341] 0c 000 1 0 0 0 0 0 0 00 [ 7.020003] 0d 000 1 0 0 0 0 0 0 00 [ 7.024003] 0e 000 1 0 0 0 0 0 0 00 [ 7.031339] 0f 000 1 0 0 0 0 0 0 00 [ 7.036004] 10 000 1 0 0 0 0 0 0 00 [ 7.040003] 11 000 1 0 0 0 0 0 0 00 [ 7.048003] 12 000 1 0 0 0 0 0 0 00 [ 7.052003] 13 000 1 0 0 0 0 0 0 00 [ 7.056004] 14 000 1 0 0 0 0 0 0 00 [ 7.064003] 15 000 1 0 0 0 0 0 0 00 [ 7.068003] 16 000 1 0 0 0 0 0 0 00 [ 7.072004] 17 000 1 0 0 0 0 0 0 00 [ 7.080002] IRQ to pin mappings: [ 7.084003] IRQ0 -> 0:2 [ 7.088002] IRQ1 -> 0:1 [ 7.090690] IRQ3 -> 0:3 [ 7.092891] IRQ4 -> 0:4 [ 7.096303] IRQ5 -> 0:5 [ 7.098992] IRQ6 -> 0:6 [ 7.100889] IRQ7 -> 0:7 [ 7.104303] IRQ8 -> 0:8 [ 7.106983] IRQ9 -> 0:9 [ 7.108889] IRQ10 -> 0:10 [ 7.112303] IRQ11 -> 0:11 [ 7.115165] IRQ12 -> 0:12 [ 7.116978] IRQ13 -> 0:13 [ 7.120977] IRQ14 -> 0:14 [ 7.124002] IRQ15 -> 0:15 [ 7.126853] .................................... done. [ 7.132306] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 7.137503] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 7.145006] Switching to clocksource hpet [ 7.182538] pnp: PnP ACPI init [ 7.185766] ACPI: bus type pnp registered [ 7.190117] pnp 00:00: [bus 00-ff] [ 7.193645] pnp 00:00: [io 0x0cf8-0x0cff] [ 7.197867] pnp 00:00: [io 0x0000-0x0cf7 window] [ 7.202689] pnp 00:00: [io 0x0d00-0xffff window] [ 7.207517] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 7.213040] pnp 00:00: [mem 0x00000000 window] [ 7.217606] pnp 00:00: [mem 0xc0000000-0xffffffff window] [ 7.223404] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 7.230845] pnp 00:01: [mem 0xfc000000-0xfcffffff] [ 7.235764] pnp 00:01: [mem 0xfd000000-0xfdffffff] [ 7.240676] pnp 00:01: [mem 0xfe000000-0xfe9fffff] [ 7.245591] pnp 00:01: [mem 0xfea00000-0xfea0001f] [ 7.250503] pnp 00:01: [mem 0xfeb00000-0xfebfffff] [ 7.255416] pnp 00:01: [mem 0xfed00400-0xfed3ffff] [ 7.260331] pnp 00:01: [mem 0xfed45000-0xfedfffff] [ 7.265506] pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 7.272750] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 7.278795] pnp 00:02: [io 0x0290-0x029f] [ 7.283012] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 7.289055] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 7.295094] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 7.301397] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 7.308132] pnp 00:03: [io 0x0060] [ 7.311727] pnp 00:03: [io 0x0064] [ 7.315354] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 7.322856] pnp 00:03: [irq 1] [ 7.326206] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 7.333747] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 7.341421] pnp 00:04: [irq 12] [ 7.344861] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 7.353847] pnp 00:05: [io 0x03f8-0x03ff] [ 7.358071] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) [ 7.365574] pnp 00:05: [irq 4] [ 7.368751] pnp 00:05: [dma 0 disabled] [ 7.372930] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 7.380669] pnp 00:06: [io 0x02f8-0x02ff] [ 7.384893] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) [ 7.392398] pnp 00:06: [irq 3] [ 7.395560] pnp 00:06: [dma 0 disabled] [ 7.399736] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 7.406934] pnp 00:07: [dma 4] [ 7.410111] pnp 00:07: [io 0x0000-0x000f] [ 7.414332] pnp 00:07: [io 0x0081-0x0083] [ 7.418549] pnp 00:07: [io 0x0087] [ 7.422162] pnp 00:07: [io 0x0089-0x008b] [ 7.426384] pnp 00:07: [io 0x008f] [ 7.429998] pnp 00:07: [io 0x00c0-0x00df] [ 7.434397] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active) [ 7.441084] pnp 00:08: [io 0x0070-0x0071] [ 7.445305] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 7.452806] pnp 00:08: [irq 8] [ 7.456158] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active) [ 7.462836] pnp 00:09: [io 0x0061] [ 7.466625] pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active) [ 7.473326] pnp 00:0a: [io 0x0010-0x001f] [ 7.477543] pnp 00:0a: [io 0x0022-0x003f] [ 7.481766] pnp 00:0a: [io 0x0044-0x005f] [ 7.485984] pnp 00:0a: [io 0x0062-0x0063] [ 7.490205] pnp 00:0a: [io 0x0065-0x006f] [ 7.494427] pnp 00:0a: [io 0x0072-0x007f] [ 7.498648] pnp 00:0a: [io 0x0080] [ 7.502260] pnp 00:0a: [io 0x0084-0x0086] [ 7.506481] pnp 00:0a: [io 0x0088] [ 7.510094] pnp 00:0a: [io 0x008c-0x008e] [ 7.514315] pnp 00:0a: [io 0x0090-0x009f] [ 7.518537] pnp 00:0a: [io 0x00a2-0x00bf] [ 7.522757] pnp 00:0a: [io 0x00e0-0x00ef] [ 7.526977] pnp 00:0a: [io 0x04d0-0x04d1] [ 7.531477] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 7.538152] pnp 00:0b: [io 0x00f0-0x00ff] [ 7.542373] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 7.550044] pnp 00:0b: [irq 13] [ 7.553482] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active) [ 7.560871] pnp 00:0c: [io 0x0400-0x047f] [ 7.565097] pnp 00:0c: [io 0x1180-0x119f] [ 7.569313] pnp 00:0c: [io 0x0500-0x057f] [ 7.573526] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff] [ 7.578441] pnp 00:0c: [mem 0xfec00000-0xfecfffff] [ 7.583355] pnp 00:0c: [mem 0xff000000-0xffffffff] [ 7.588544] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 7.595681] pnp 00:0d: [mem 0xfed00000-0xfed003ff] [ 7.600824] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active) [ 7.608117] pnp: PnP ACPI: found 14 devices [ 7.612424] ACPI: ACPI bus type pnp unregistered [ 7.617177] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved [ 7.623916] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved [ 7.630650] system 00:01: [mem 0xfe000000-0xfe9fffff] has been reserved [ 7.637383] system 00:01: [mem 0xfea00000-0xfea0001f] has been reserved [ 7.644116] system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved [ 7.650851] system 00:01: [mem 0xfed00400-0xfed3ffff] could not be reserved [ 7.657930] system 00:01: [mem 0xfed45000-0xfedfffff] has been reserved [ 7.664671] system 00:02: [io 0x0290-0x029f] has been reserved [ 7.670724] system 00:0a: [io 0x04d0-0x04d1] has been reserved [ 7.676771] system 00:0c: [io 0x0400-0x047f] has been reserved [ 7.682813] system 00:0c: [io 0x1180-0x119f] has been reserved [ 7.688858] system 00:0c: [io 0x0500-0x057f] could not be reserved [ 7.695251] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 7.701987] system 00:0c: [mem 0xfec00000-0xfecfffff] could not be reserved [ 7.709077] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved [ 7.731302] pci 0000:00:1c.0: BAR 9: assigned [mem 0xd0000000-0xd01fffff 64bit pref] [ 7.739238] pci 0000:00:1c.4: BAR 9: assigned [mem 0xd0200000-0xd03fffff 64bit pref] [ 7.747175] pci 0000:00:01.0: PCI bridge to [bus 01-02] [ 7.752521] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 7.758736] pci 0000:00:01.0: bridge window [mem 0xfba00000-0xfbbfffff] [ 7.765650] pci 0000:00:01.0: bridge window [mem pref disabled] [ 7.771867] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 7.777209] pci 0000:00:03.0: bridge window [io disabled] [ 7.782994] pci 0000:00:03.0: bridge window [mem disabled] [ 7.788774] pci 0000:00:03.0: bridge window [mem pref disabled] [ 7.794997] pci 0000:00:05.0: PCI bridge to [bus 04-04] [ 7.800339] pci 0000:00:05.0: bridge window [io disabled] [ 7.806125] pci 0000:00:05.0: bridge window [mem disabled] [ 7.811912] pci 0000:00:05.0: bridge window [mem pref disabled] [ 7.818129] pci 0000:00:07.0: PCI bridge to [bus 05-05] [ 7.823482] pci 0000:00:07.0: bridge window [io disabled] [ 7.829265] pci 0000:00:07.0: bridge window [mem disabled] [ 7.835044] pci 0000:00:07.0: bridge window [mem pref disabled] [ 7.841262] pci 0000:06:00.0: PCI bridge to [bus 07-07] [ 7.846610] pci 0000:06:00.0: bridge window [io disabled] [ 7.852396] pci 0000:06:00.0: bridge window [mem disabled] [ 7.858175] pci 0000:06:00.0: bridge window [mem pref disabled] [ 7.864390] pci 0000:06:00.2: PCI bridge to [bus 08-08] [ 7.869736] pci 0000:06:00.2: bridge window [io 0xd000-0xdfff] [ 7.875951] pci 0000:06:00.2: bridge window [mem 0xfb700000-0xfb9fffff] [ 7.882866] pci 0000:06:00.2: bridge window [mem pref disabled] [ 7.889083] pci 0000:00:09.0: PCI bridge to [bus 06-08] [ 7.894436] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 7.900651] pci 0000:00:09.0: bridge window [mem 0xfb700000-0xfb9fffff] [ 7.907565] pci 0000:00:09.0: bridge window [mem pref disabled] [ 7.913782] pci 0000:00:1c.0: PCI bridge to [bus 09-09] [ 7.919127] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff] [ 7.925343] pci 0000:00:1c.0: bridge window [mem 0xfb400000-0xfb6fffff] [ 7.932260] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref] [ 7.940199] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a] [ 7.945552] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 7.951767] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff] [ 7.958683] pci 0000:00:1c.4: bridge window [mem 0xd0200000-0xd03fffff 64bit pref] [ 7.966615] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] [ 7.971968] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 7.978191] pci 0000:00:1e.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 7.985107] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 7.993059] IOAPIC[3]: Set routing entry (4-4 -> 0x29 -> IRQ 76 Mode:1 Active:1) [ 8.000650] pci 0000:00:01.0: PCI INT A -> GSI 76 (level, low) -> IRQ 76 [ 8.007476] pci 0000:00:01.0: setting latency timer to 64 [ 8.014588] IOAPIC[3]: Set routing entry (4-0 -> 0x41 -> IRQ 72 Mode:1 Active:1) [ 8.022175] pci 0000:00:03.0: PCI INT A -> GSI 72 (level, low) -> IRQ 72 [ 8.029003] pci 0000:00:03.0: setting latency timer to 64 [ 8.034534] IOAPIC[3]: Set routing entry (4-2 -> 0x49 -> IRQ 74 Mode:1 Active:1) [ 8.042118] pci 0000:00:05.0: PCI INT A -> GSI 74 (level, low) -> IRQ 74 [ 8.048947] pci 0000:00:05.0: setting latency timer to 64 [ 8.054472] IOAPIC[3]: Set routing entry (4-6 -> 0x51 -> IRQ 78 Mode:1 Active:1) [ 8.062059] pci 0000:00:07.0: PCI INT A -> GSI 78 (level, low) -> IRQ 78 [ 8.068888] pci 0000:00:07.0: setting latency timer to 64 [ 8.074418] IOAPIC[3]: Set routing entry (4-8 -> 0x59 -> IRQ 80 Mode:1 Active:1) [ 8.082010] pci 0000:00:09.0: PCI INT A -> GSI 80 (level, low) -> IRQ 80 [ 8.088839] pci 0000:00:09.0: setting latency timer to 64 [ 8.094365] pci 0000:06:00.0: setting latency timer to 64 [ 8.099894] pci 0000:06:00.2: setting latency timer to 64 [ 8.105423] IOAPIC[0]: Set routing entry (0-17 -> 0x61 -> IRQ 17 Mode:1 Active:1) [ 8.113096] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 8.119924] pci 0000:00:1c.0: setting latency timer to 64 [ 8.125450] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 8.132275] pci 0000:00:1c.4: setting latency timer to 64 [ 8.137800] pci 0000:00:1e.0: setting latency timer to 64 [ 8.143324] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 8.149015] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 8.154710] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 8.161099] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff] [ 8.167484] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 8.173180] pci_bus 0000:01: resource 1 [mem 0xfba00000-0xfbbfffff] [ 8.179566] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff] [ 8.185260] pci_bus 0000:06: resource 1 [mem 0xfb700000-0xfb9fffff] [ 8.191647] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 8.197342] pci_bus 0000:08: resource 1 [mem 0xfb700000-0xfb9fffff] [ 8.203729] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 8.209423] pci_bus 0000:09: resource 1 [mem 0xfb400000-0xfb6fffff] [ 8.215810] pci_bus 0000:09: resource 2 [mem 0xd0000000-0xd01fffff 64bit pref] [ 8.223221] pci_bus 0000:0a: resource 0 [io 0xb000-0xbfff] [ 8.228914] pci_bus 0000:0a: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 8.235302] pci_bus 0000:0a: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref] [ 8.242710] pci_bus 0000:0b: resource 0 [io 0xa000-0xafff] [ 8.248404] pci_bus 0000:0b: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 8.254793] pci_bus 0000:0b: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref] [ 8.262201] pci_bus 0000:0b: resource 4 [io 0x0000-0x0cf7] [ 8.267895] pci_bus 0000:0b: resource 5 [io 0x0d00-0xffff] [ 8.273591] pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff] [ 8.279977] pci_bus 0000:0b: resource 7 [mem 0xc0000000-0xffffffff] [ 8.286722] NET: Registered protocol family 2 [ 8.292478] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 8.303392] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 8.313741] TCP bind hash table entries: 65536 (order: 10, 5242880 bytes) [ 8.323366] TCP: Hash tables configured (established 524288 bind 65536) [ 8.330123] TCP reno registered [ 8.333732] UDP hash table entries: 8192 (order: 8, 1572864 bytes) [ 8.341097] UDP-Lite hash table entries: 8192 (order: 8, 1572864 bytes) [ 8.349046] NET: Registered protocol family 1 [ 8.353997] RPC: Registered udp transport module. [ 8.358832] RPC: Registered tcp transport module. [ 8.363653] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 8.370300] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x003f [ 8.376962] pci 0000:00:1a.0: Performing full reset [ 8.381981] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x003f [ 8.388631] pci 0000:00:1a.2: Performing full reset [ 8.393711] pci 0000:00:1a.7: EHCI: BIOS handoff [ 8.424101] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x103f [ 8.430757] pci 0000:00:1d.0: Performing full reset [ 8.435777] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x003f [ 8.442425] pci 0000:00:1d.1: Performing full reset [ 8.447441] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x003f [ 8.454090] pci 0000:00:1d.2: Performing full reset [ 8.459158] pci 0000:00:1d.7: EHCI: BIOS handoff [ 8.488214] pci 0000:0b:01.0: Boot video device [ 8.492873] PCI: CLS 64 bytes, default 64 [ 8.497119] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 8.503682] Placing 64MB software IO TLB between ffff8800b7800000 - ffff8800bb800000 [ 8.511613] software IO TLB at phys 0xb7800000 - 0xbb800000 [ 8.534222] Machine check injector initialized [ 8.546129] microcode: CPU0 sig=0x206c1, pf=0x1, revision=0x3 [ 8.552024] microcode: CPU1 sig=0x206c1, pf=0x1, revision=0x3 [ 8.557893] microcode: CPU2 sig=0x206c1, pf=0x1, revision=0x3 [ 8.563760] microcode: CPU3 sig=0x206c1, pf=0x1, revision=0x3 [ 8.569628] microcode: CPU4 sig=0x206c1, pf=0x1, revision=0x3 [ 8.575494] microcode: CPU5 sig=0x206c1, pf=0x1, revision=0x3 [ 8.581363] microcode: CPU6 sig=0x206c1, pf=0x1, revision=0x3 [ 8.587239] microcode: CPU7 sig=0x206c1, pf=0x1, revision=0x3 [ 8.593118] microcode: CPU8 sig=0x206c1, pf=0x1, revision=0x3 [ 8.598998] microcode: CPU9 sig=0x206c1, pf=0x1, revision=0x3 [ 8.604876] microcode: CPU10 sig=0x206c1, pf=0x1, revision=0x3 [ 8.610837] microcode: CPU11 sig=0x206c1, pf=0x1, revision=0x3 [ 8.616801] microcode: CPU12 sig=0x206c1, pf=0x1, revision=0x3 [ 8.622763] microcode: CPU13 sig=0x206c1, pf=0x1, revision=0x3 [ 8.628723] microcode: CPU14 sig=0x206c1, pf=0x1, revision=0x3 [ 8.634677] microcode: CPU15 sig=0x206c1, pf=0x1, revision=0x3 [ 8.640634] microcode: CPU16 sig=0x206c1, pf=0x1, revision=0x3 [ 8.646595] microcode: CPU17 sig=0x206c1, pf=0x1, revision=0x3 [ 8.652552] microcode: CPU18 sig=0x206c1, pf=0x1, revision=0x3 [ 8.658521] microcode: CPU19 sig=0x206c1, pf=0x1, revision=0x3 [ 8.664485] microcode: CPU20 sig=0x206c1, pf=0x1, revision=0x3 [ 8.670446] microcode: CPU21 sig=0x206c1, pf=0x1, revision=0x3 [ 8.676410] microcode: CPU22 sig=0x206c1, pf=0x1, revision=0x3 [ 8.682373] microcode: CPU23 sig=0x206c1, pf=0x1, revision=0x3 [ 8.688468] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 8.697444] Scanning for low memory corruption every 60 seconds [ 8.704398] audit: initializing netlink socket (disabled) [ 8.709959] type=2000 audit(1293792431.708:1): initialized [ 8.730071] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 8.740288] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 8.747500] fuse init (API version 7.15) [ 8.751970] JFS: nTxBlock = 8192, nTxLock = 65536 [ 8.761053] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 8.772117] Btrfs loaded [ 8.774768] msgmni has been set to 31955 [ 8.780148] async_tx: api initialized (async) [ 8.784803] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 8.792392] io scheduler noop registered [ 8.796438] io scheduler deadline registered [ 8.800986] io scheduler cfq registered (default) [ 8.807552] pcieport 0000:00:01.0: ACPI _OSC control granted for 0x1c [ 8.814134] pcieport 0000:00:01.0: setting latency timer to 64 [ 8.820138] pcieport 0000:00:01.0: irq 112 for MSI/MSI-X [ 8.827101] pcieport 0000:00:03.0: ACPI _OSC control granted for 0x1c [ 8.833684] pcieport 0000:00:03.0: setting latency timer to 64 [ 8.839686] pcieport 0000:00:03.0: irq 113 for MSI/MSI-X [ 8.846655] pcieport 0000:00:05.0: ACPI _OSC control granted for 0x1c [ 8.853235] pcieport 0000:00:05.0: setting latency timer to 64 [ 8.859231] pcieport 0000:00:05.0: irq 114 for MSI/MSI-X [ 8.866191] pcieport 0000:00:07.0: ACPI _OSC control granted for 0x1c [ 8.872771] pcieport 0000:00:07.0: setting latency timer to 64 [ 8.878774] pcieport 0000:00:07.0: irq 115 for MSI/MSI-X [ 8.885729] pcieport 0000:00:09.0: ACPI _OSC control granted for 0x1c [ 8.892305] pcieport 0000:00:09.0: setting latency timer to 64 [ 8.898308] pcieport 0000:00:09.0: irq 116 for MSI/MSI-X [ 8.905281] pcieport 0000:00:1c.0: ACPI _OSC control granted for 0x1c [ 8.911853] pcieport 0000:00:1c.0: setting latency timer to 64 [ 8.917859] pcieport 0000:00:1c.0: irq 117 for MSI/MSI-X [ 8.924839] pcieport 0000:00:1c.4: ACPI _OSC control granted for 0x1c [ 8.931416] pcieport 0000:00:1c.4: setting latency timer to 64 [ 8.937416] pcieport 0000:00:1c.4: irq 118 for MSI/MSI-X [ 8.943366] aer 0000:00:01.0:pcie02: service driver aer loaded [ 8.949377] aer 0000:00:03.0:pcie02: service driver aer loaded [ 8.955396] aer 0000:00:05.0:pcie02: service driver aer loaded [ 8.961400] aer 0000:00:07.0:pcie02: service driver aer loaded [ 8.967405] aer 0000:00:09.0:pcie02: service driver aer loaded [ 8.973580] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 8.980235] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 8.988612] ACPI: Sleep Button [SLPB] [ 8.992568] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 9.000946] ACPI: Power Button [PWRB] [ 9.004925] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 9.012513] ACPI: Power Button [PWRF] [ 9.017585] ACPI: acpi_idle registered with cpuidle [ 9.023377] Monitor-Mwait will be used to enter C-3 state [ 9.028960] Monitor-Mwait will be used to enter C-3 state [ 9.150969] Initializing Nozomi driver 2.1d (build date: Dec 31 2010 09:03:57) [ 9.159528] Non-volatile memory driver v1.3 [ 9.164367] Linux agpgart interface v0.103 [ 9.168709] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 9.177857] Hangcheck: Using getrawmonotonic(). [ 9.182639] [drm] Initialized drm 1.1.0 20060810 [ 9.187386] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module! [ 9.195064] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 9.221955] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 9.304384] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 9.537033] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 9.624730] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 12.712120] floppy0: no floppy controllers found [ 12.722928] brd: module loaded [ 12.728896] loop: module loaded [ 12.733181] Loading iSCSI transport class v2.0-870. [ 12.739568] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 12.745267] Detecting Adaptec I2O RAID controllers... [ 12.750775] Adaptec aacraid driver 1.1-5[26400]-ms [ 12.756360] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 12.763753] QLogic Fibre Channel HBA Driver: 8.03.05-k0 [ 12.769456] iscsi: registered transport (qla4xxx) [ 12.774425] QLogic iSCSI HBA Driver [ 12.778177] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 12.785829] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 12.793049] megasas: 00.00.04.31-rc1 Mon. May 3, 11:41:51 PST 2010 [ 12.799496] mpt2sas version 06.100.00.00 loaded [ 12.804917] ahci 0000:00:1f.2: version 3.0 [ 12.809153] IOAPIC[0]: Set routing entry (0-19 -> 0xa1 -> IRQ 19 Mode:1 Active:1) [ 12.816824] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 12.823825] ahci 0000:00:1f.2: irq 119 for MSI/MSI-X [ 12.829017] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 12.837383] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ccc ems sxs [ 12.845572] ahci 0000:00:1f.2: setting latency timer to 64 [ 12.890915] scsi0 : ahci [ 12.894085] scsi1 : ahci [ 12.897087] scsi2 : ahci [ 12.900087] scsi3 : ahci [ 12.903083] scsi4 : ahci [ 12.906070] scsi5 : ahci [ 12.909586] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 119 [ 12.918041] ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 119 [ 12.926488] ata3: SATA max UDMA/133 abar m2048@0xfbe21000 port 0xfbe21200 irq 119 [ 12.934158] ata4: SATA max UDMA/133 abar m2048@0xfbe21000 port 0xfbe21280 irq 119 [ 12.941827] ata5: SATA max UDMA/133 abar m2048@0xfbe21000 port 0xfbe21300 irq 119 [ 12.949499] ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 119 [ 12.962619] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 12.969787] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 12.975795] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2 [ 12.981834] e1000e: Copyright (c) 1999 - 2010 Intel Corporation. [ 12.988109] Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2 [ 12.994841] Copyright (c) 2007-2009 Intel Corporation. [ 13.000145] igb 0000:01:00.0: PCI INT A -> GSI 76 (level, low) -> IRQ 76 [ 13.006977] igb 0000:01:00.0: setting latency timer to 64 [ 13.012818] igb 0000:01:00.0: irq 120 for MSI/MSI-X [ 13.017822] igb 0000:01:00.0: irq 121 for MSI/MSI-X [ 13.022822] igb 0000:01:00.0: irq 122 for MSI/MSI-X [ 13.027820] igb 0000:01:00.0: irq 123 for MSI/MSI-X [ 13.032822] igb 0000:01:00.0: irq 124 for MSI/MSI-X [ 13.037822] igb 0000:01:00.0: irq 125 for MSI/MSI-X [ 13.042822] igb 0000:01:00.0: irq 126 for MSI/MSI-X [ 13.047824] igb 0000:01:00.0: irq 127 for MSI/MSI-X [ 13.052826] igb 0000:01:00.0: irq 128 for MSI/MSI-X [ 13.273584] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 13.276038] ata3: SATA link down (SStatus 0 SControl 300) [ 13.276086] ata5: SATA link down (SStatus 0 SControl 300) [ 13.276114] ata4: SATA link down (SStatus 0 SControl 300) [ 13.297120] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:30:48:cf:17:26 [ 13.304453] igb 0000:01:00.0: eth0: PBA No: 0010ff-0ff [ 13.309710] igb 0000:01:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 13.317501] IOAPIC[3]: Set routing entry (4-16 -> 0x2a -> IRQ 88 Mode:1 Active:1) [ 13.325175] igb 0000:01:00.1: PCI INT B -> GSI 88 (level, low) -> IRQ 88 [ 13.332018] igb 0000:01:00.1: setting latency timer to 64 [ 13.337860] igb 0000:01:00.1: irq 129 for MSI/MSI-X [ 13.342863] igb 0000:01:00.1: irq 130 for MSI/MSI-X [ 13.347863] igb 0000:01:00.1: irq 131 for MSI/MSI-X [ 13.352864] igb 0000:01:00.1: irq 132 for MSI/MSI-X [ 13.357863] igb 0000:01:00.1: irq 133 for MSI/MSI-X [ 13.362864] igb 0000:01:00.1: irq 134 for MSI/MSI-X [ 13.367864] igb 0000:01:00.1: irq 135 for MSI/MSI-X [ 13.372869] igb 0000:01:00.1: irq 136 for MSI/MSI-X [ 13.377876] igb 0000:01:00.1: irq 137 for MSI/MSI-X [ 13.589557] igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection [ 13.596557] igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:30:48:cf:17:27 [ 13.603884] igb 0000:01:00.1: eth1: PBA No: 0010ff-0ff [ 13.609141] igb 0000:01:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 13.617009] Intel(R) Virtual Function Network Driver - version 1.0.0-k0 [ 13.623743] Copyright (c) 2009 Intel Corporation. [ 13.628700] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 2.0.84-k2 [ 13.636719] ixgbe: Copyright (c) 1999-2010 Intel Corporation. [ 13.642726] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 13.649986] ixgb: Copyright (c) 1999-2008 Intel Corporation. [ 13.656455] jme: JMicron JMC2XX ethernet driver version 1.0.7 [ 13.662832] ns83820.c: National Semiconductor DP83820 10/100/1000 driver. [ 13.670128] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.6 (Oct 12, 2010) [ 13.677827] sky2: driver version 1.28 [ 13.680038] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 13.680072] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 13.680099] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 13.681156] ata1.00: ATA-8: ST31000528AS, CC35, max UDMA/133 [ 13.681160] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 13.682438] ata1.00: configured for UDMA/133 [ 13.682704] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC35 PQ: 0 ANSI: 5 [ 13.682787] ata6.00: ATAPI: Slimtype DVD A DS8A2S, 6P5D, max UDMA/100 [ 13.683173] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 13.683321] sd 0:0:0:0: [sda] Write Protect is off [ 13.683324] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 13.683382] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.686548] ata6.00: configured for UDMA/100 [ 13.693654] sda: sda1 sda2 [ 13.720257] ata2.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133 [ 13.720260] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 13.778562] ata2.00: configured for UDMA/133 [ 13.778750] scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 13.779206] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 13.779333] sd 1:0:0:0: [sdb] Write Protect is off [ 13.779335] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 13.779387] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 13.782370] scsi 5:0:0:0: CD-ROM Slimtype DVD A DS8A2S 6P5D PQ: 0 ANSI: 5 [ 13.828168] sd 0:0:0:0: [sda] Attached SCSI disk [ 13.829143] tun: Universal TUN/TAP device driver, 1.6 [ 13.829145] tun: (C) 1999-2004 Max Krasnyansky [ 13.829621] usbcore: registered new interface driver catc [ 13.829622] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver [ 13.829715] usbcore: registered new interface driver kaweth [ 13.829716] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 13.829812] usbcore: registered new interface driver pegasus [ 13.829813] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver [ 13.829909] usbcore: registered new interface driver rtl8150 [ 13.830005] usbcore: registered new interface driver asix [ 13.830103] usbcore: registered new interface driver cdc_ether [ 13.830202] usbcore: registered new interface driver cdc_eem [ 13.830302] usbcore: registered new interface driver dm9601 [ 13.830406] usbcore: registered new interface driver smsc75xx [ 13.830506] usbcore: registered new interface driver smsc95xx [ 13.830609] usbcore: registered new interface driver gl620a [ 13.830710] usbcore: registered new interface driver net1080 [ 13.830810] usbcore: registered new interface driver plusb [ 13.830906] usbcore: registered new interface driver rndis_host [ 13.831006] usbcore: registered new interface driver cdc_subset [ 13.831103] usbcore: registered new interface driver zaurus [ 13.831203] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 13.831303] usbcore: registered new interface driver int51x1 [ 13.831306] netconsole: local port 6665 [ 13.831307] netconsole: local IP 10.0.0.0 [ 13.831308] netconsole: interface 'eth0' [ 13.831309] netconsole: remote port 6666 [ 13.831311] netconsole: remote IP 192.168.1.11 [ 13.831312] netconsole: remote ethernet address 00:30:48:fe:19:95 [ 13.831314] netconsole: device eth0 not up yet, forcing it [ 13.831965] sdb: sdb1 sdb2 sdb3 < sdb5 > [ 14.007963] sd 1:0:0:0: [sdb] Attached SCSI disk [ 16.480631] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 24.977927] console [netcon0] enabled [ 24.981713] netconsole: network logging started [ 24.986557] Fusion MPT base driver 3.04.17 [ 24.990803] Copyright (c) 1999-2008 LSI Corporation [ 24.995852] Fusion MPT SPI Host driver 3.04.17 [ 25.000576] Fusion MPT FC Host driver 3.04.17 [ 25.005198] Fusion MPT SAS Host driver 3.04.17 [ 25.009826] IOAPIC[0]: Set routing entry (0-16 -> 0x8a -> IRQ 16 Mode:1 Active:1) [ 25.017500] mptsas 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 25.024763] mptbase: ioc0: Initiating bringup [ 25.732025] ioc0: LSISAS1068E B2: Capabilities={Initiator} [ 25.737936] mptsas 0000:09:00.0: setting latency timer to 64 [ 36.583437] scsi6 : ioc0: LSISAS1068E B2, FwRev=01120000h, Ports=1, MaxQ=511, IRQ=16 [ 36.621485] mptsas: ioc0: add expander: num_phys 13, sas_addr (0x5000bb52118dc0ff) [ 36.673945] mptsas: ioc0: add expander: num_phys 12, sas_addr (0x5000bb52118dc1ff) [ 36.734563] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 18, phy 0, sas_addr 0x5000c500022d0c6d [ 36.745902] scsi 6:0:0:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 36.779403] sd 6:0:0:0: [sdc] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.787109] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 14, phy 1, sas_addr 0x5000c500022d09b5 [ 36.798412] sd 6:0:0:0: [sdc] Write Protect is off [ 36.803355] sd 6:0:0:0: [sdc] Mode Sense: b3 00 10 08 [ 36.803370] scsi 6:0:1:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 36.837837] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.847231] sd 6:0:1:0: [sdd] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.847938] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 16, phy 2, sas_addr 0x5000c500022d0f35 [ 36.869806] scsi 6:0:2:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 36.878143] sd 6:0:1:0: [sdd] Write Protect is off [ 36.883063] sd 6:0:1:0: [sdd] Mode Sense: b3 00 10 08 [ 36.903197] sd 6:0:2:0: [sde] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.910911] sd 6:0:1:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.910933] sdc: sdc1 sdc2 [ 36.912066] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 17, phy 3, sas_addr 0x5000c500022d2a0d [ 36.913488] scsi 6:0:3:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 36.913855] sd 6:0:2:0: [sde] Write Protect is off [ 36.913857] sd 6:0:2:0: [sde] Mode Sense: b3 00 10 08 [ 36.915981] sd 6:0:2:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.936484] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 15, phy 4, sas_addr 0x5000c500022d25dd [ 36.959732] sd 6:0:3:0: [sdf] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 36.960154] scsi 6:0:4:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 36.961900] sd 6:0:3:0: [sdf] Write Protect is off [ 36.961903] sd 6:0:3:0: [sdf] Mode Sense: b3 00 10 08 [ 36.984562] sd 6:0:3:0: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 36.985179] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 19, phy 5, sas_addr 0x5000c500022c3f65 [ 36.985194] sd 6:0:4:0: [sdg] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 37.006801] sde: sde1 sde2 [ 37.007254] scsi 6:0:5:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 37.007804] sd 6:0:4:0: [sdg] Write Protect is off [ 37.007807] sd 6:0:4:0: [sdg] Mode Sense: b3 00 10 08 [ 37.009746] sd 6:0:4:0: [sdg] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 37.032203] mptsas: ioc0: attaching stp device: fw_channel 0, fw_id 20, phy 12, sas_addr 0x5000bb52118dc0fc [ 37.032232] sd 6:0:5:0: [sdh] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 37.053616] sdf: sdf1 sdf2 [ 37.054941] sd 6:0:5:0: [sdh] Write Protect is off [ 37.054943] sd 6:0:5:0: [sdh] Mode Sense: b3 00 10 08 [ 37.056624] sd 6:0:5:0: [sdh] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 37.084520] sdg: sdg1 sdg2 [ 37.089764] sdh: sdh1 sdh2 [ 37.096364] scsi 6:0:6:0: Enclosure XYRATEX 3GSAS1.0-SATAEXP 1.05 PQ: 0 ANSI: 5 [ 37.236628] sd 6:0:4:0: [sdg] Attached SCSI disk [ 37.241430] sd 6:0:3:0: [sdf] Attached SCSI disk [ 37.246209] sd 6:0:5:0: [sdh] Attached SCSI disk [ 37.246353] sd 6:0:2:0: [sde] Attached SCSI disk [ 37.247074] sd 6:0:0:0: [sdc] Attached SCSI disk [ 37.251497] sdd: sdd1 sdd2 [ 37.289160] sd 6:0:1:0: [sdd] Attached SCSI disk [ 37.329542] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 28, phy 0, sas_addr 0x5000c500022c41a5 [ 37.340852] scsi 6:0:7:0: Direct-Access SEAGATE ST3300555SS XRT0 PQ: 0 ANSI: 5 [ 37.374141] sd 6:0:7:0: [sdi] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 37.381838] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 29, phy 1, sas_addr 0x5000c500130f4649 [ 37.393131] sd 6:0:7:0: [sdi] Write Protect is off [ 37.398075] sd 6:0:7:0: [sdi] Mode Sense: b3 00 10 08 [ 37.398090] scsi 6:0:8:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 37.413453] sd 6:0:8:0: [sdj] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 37.421158] sd 6:0:7:0: [sdi] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 37.422306] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 30, phy 2, sas_addr 0x5000c500130fe681 [ 37.423766] sd 6:0:8:0: [sdj] Write Protect is off [ 37.423768] sd 6:0:8:0: [sdj] Mode Sense: b3 00 10 08 [ 37.423908] scsi 6:0:9:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 37.425251] sd 6:0:8:0: [sdj] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 37.426584] sd 6:0:9:0: [sdk] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 37.428110] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 31, phy 3, sas_addr 0x5000c500130f4f4d [ 37.429365] sd 6:0:9:0: [sdk] Write Protect is off [ 37.429367] sd 6:0:9:0: [sdk] Mode Sense: b3 00 10 08 [ 37.429692] scsi 6:0:10:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 37.431144] sd 6:0:9:0: [sdk] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 37.431355] sdj: sdj1 sdj2 [ 37.432781] sd 6:0:10:0: [sdl] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 37.434327] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 32, phy 4, sas_addr 0x5000c50013005f59 [ 37.435543] sd 6:0:10:0: [sdl] Write Protect is off [ 37.435545] sd 6:0:10:0: [sdl] Mode Sense: b3 00 10 08 [ 37.435861] scsi 6:0:11:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 37.437191] sd 6:0:10:0: [sdl] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 37.438666] sd 6:0:11:0: [sdm] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 37.440205] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 33, phy 5, sas_addr 0x5000c500130e21cd [ 37.441485] sd 6:0:11:0: [sdm] Write Protect is off [ 37.441488] sd 6:0:11:0: [sdm] Mode Sense: b3 00 10 08 [ 37.441786] scsi 6:0:12:0: Direct-Access SEAGATE ST3300656SS HS09 PQ: 0 ANSI: 5 [ 37.442003] sdk: sdk1 sdk2 [ 37.449232] sd 6:0:11:0: [sdm] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 37.449931] sd 6:0:12:0: [sdn] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 37.451444] sdl: sdl1 sdl2 [ 37.451489] Fusion MPT misc device (ioctl) driver 3.04.17 [ 37.451701] mptctl: Registered with Fusion MPT base driver [ 37.451703] mptctl: /dev/mptctl @ (major,minor=10,220) [ 37.451881] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 37.451883] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 37.451957] IOAPIC[0]: Set routing entry (0-18 -> 0x92 -> IRQ 18 Mode:1 Active:1) [ 37.451963] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 37.452040] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 37.452045] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 37.452135] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file 'devices' [ 37.452152] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 37.452166] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 37.452661] sd 6:0:12:0: [sdn] Write Protect is off [ 37.452663] sd 6:0:12:0: [sdn] Mode Sense: b3 00 10 08 [ 37.454081] sd 6:0:12:0: [sdn] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 37.454348] sdm: sdm1 sdm2 [ 37.458147] sdn: sdn1 sdn2 [ 37.749352] sd 6:0:11:0: [sdm] Attached SCSI disk [ 37.749406] sd 6:0:9:0: [sdk] Attached SCSI disk [ 37.749427] sd 6:0:10:0: [sdl] Attached SCSI disk [ 37.749445] sd 6:0:8:0: [sdj] Attached SCSI disk [ 37.749465] sd 6:0:12:0: [sdn] Attached SCSI disk [ 37.756580] sdi: sdi1 sdi2 [ 37.788036] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 37.797189] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 37.802006] sd 6:0:7:0: [sdi] Attached SCSI disk [ 37.811569] ehci_hcd 0000:00:1a.7: debug port 1 [ 37.816235] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 37.829279] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 37.836189] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 37.842113] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbe23000 [ 37.847902] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 37.860920] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 37.880032] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 37.886009] usb usb1: default language 0x0409 [ 37.890520] usb usb1: udev 1, busnum 1, minor = 0 [ 37.895346] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 37.902255] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 37.909663] usb usb1: Product: EHCI Host Controller [ 37.914670] usb usb1: Manufacturer: Linux 2.6.37-rc8-dt5+ ehci_hcd [ 37.920975] usb usb1: SerialNumber: 0000:00:1a.7 [ 37.925920] usb usb1: usb_probe_device [ 37.929798] usb usb1: configuration #1 chosen from 1 choice [ 37.935537] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 37.941563] hub 1-0:1.0: usb_probe_interface [ 37.945961] hub 1-0:1.0: usb_probe_interface - got id [ 37.951135] hub 1-0:1.0: USB hub found [ 37.955016] hub 1-0:1.0: 6 ports detected [ 37.959151] hub 1-0:1.0: standalone hub [ 37.963110] hub 1-0:1.0: no power switching (usb 1.0) [ 37.968283] hub 1-0:1.0: individual port over-current protection [ 37.974411] hub 1-0:1.0: power on to power good time: 20ms [ 37.980045] hub 1-0:1.0: local power source is good [ 37.985048] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 37.992116] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 37.999957] IOAPIC[0]: Set routing entry (0-23 -> 0x9a -> IRQ 23 Mode:1 Active:1) [ 38.007636] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 38.014922] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 38.020875] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 38.026227] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '002' [ 38.033911] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 38.060025] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 38.069184] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 38.078803] ehci_hcd 0000:00:1d.7: debug port 1 [ 38.083457] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 38.096513] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 38.103426] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 38.109373] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 38.109402] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbe22000 [ 38.109405] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 38.113293] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 38.124030] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 38.124101] usb usb2: default language 0x0409 [ 38.124120] usb usb2: udev 1, busnum 2, minor = 128 [ 38.124122] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 38.124123] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 38.124125] usb usb2: Product: EHCI Host Controller [ 38.124126] usb usb2: Manufacturer: Linux 2.6.37-rc8-dt5+ ehci_hcd [ 38.124128] usb usb2: SerialNumber: 0000:00:1d.7 [ 38.124308] usb usb2: usb_probe_device [ 38.124310] usb usb2: configuration #1 chosen from 1 choice [ 38.124321] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 38.124426] hub 2-0:1.0: usb_probe_interface [ 38.124427] hub 2-0:1.0: usb_probe_interface - got id [ 38.124428] hub 2-0:1.0: USB hub found [ 38.124438] hub 2-0:1.0: 6 ports detected [ 38.124439] hub 2-0:1.0: standalone hub [ 38.124440] hub 2-0:1.0: no power switching (usb 1.0) [ 38.124441] hub 2-0:1.0: individual port over-current protection [ 38.124443] hub 2-0:1.0: power on to power good time: 20ms [ 38.124453] hub 2-0:1.0: local power source is good [ 38.124455] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 38.124524] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 38.124755] uhci_hcd: USB Universal Host Controller Interface driver [ 38.263880] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 38.263953] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 38.263981] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 38.263987] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 38.264127] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '003' [ 38.264141] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 38.306658] hub 2-0:1.0: port 1: status 0501 change 0001 [ 38.340026] uhci_hcd 0000:00:1a.0: detected 2 ports [ 38.345034] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 38.351860] uhci_hcd 0000:00:1a.0: Performing full reset [ 38.357307] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 38.363190] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0c0 [ 38.369139] usb usb3: default language 0x0409 [ 38.373645] usb usb3: udev 1, busnum 3, minor = 256 [ 38.378649] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 38.385556] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 38.392967] usb usb3: Product: UHCI Host Controller [ 38.397966] usb usb3: Manufacturer: Linux 2.6.37-rc8-dt5+ uhci_hcd [ 38.404268] usb usb3: SerialNumber: 0000:00:1a.0 [ 38.410794] usb usb3: usb_probe_device [ 38.412048] hub 2-0:1.0: state 7 ports 6 chg 0002 evt 0000 [ 38.412071] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 38.426657] usb usb3: configuration #1 chosen from 1 choice [ 38.432367] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 38.438369] hub 3-0:1.0: usb_probe_interface [ 38.442767] hub 3-0:1.0: usb_probe_interface - got id [ 38.447938] hub 3-0:1.0: USB hub found [ 38.451821] hub 3-0:1.0: 2 ports detected [ 38.455956] hub 3-0:1.0: standalone hub [ 38.459917] hub 3-0:1.0: no power switching (usb 1.0) [ 38.465090] hub 3-0:1.0: individual port over-current protection [ 38.468194] ehci_hcd 0000:00:1d.7: port 1 full speed --> companion [ 38.468198] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 38.468204] hub 2-0:1.0: port 1 not reset yet, waiting 50ms [ 38.492340] hub 3-0:1.0: power on to power good time: 2ms [ 38.497868] hub 3-0:1.0: local power source is good [ 38.502868] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 38.509907] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 38.517671] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0 [ 38.523855] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 38.524034] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 38.524080] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0002 [ 38.545681] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 38.551637] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 38.556988] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '004' [ 38.564670] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4 [ 38.592041] uhci_hcd 0000:00:1a.2: detected 2 ports [ 38.597051] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 38.603878] uhci_hcd 0000:00:1a.2: Performing full reset [ 38.609329] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 38.615231] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 38.615254] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000f0a0 [ 38.615319] usb usb4: default language 0x0409 [ 38.615340] usb usb4: udev 1, busnum 4, minor = 384 [ 38.615341] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 38.615343] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 38.615344] usb usb4: Product: UHCI Host Controller [ 38.615346] usb usb4: Manufacturer: Linux 2.6.37-rc8-dt5+ uhci_hcd [ 38.615347] usb usb4: SerialNumber: 0000:00:1a.2 [ 38.615539] usb usb4: usb_probe_device [ 38.615541] usb usb4: configuration #1 chosen from 1 choice [ 38.615553] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 38.615663] hub 4-0:1.0: usb_probe_interface [ 38.615664] hub 4-0:1.0: usb_probe_interface - got id [ 38.615666] hub 4-0:1.0: USB hub found [ 38.615676] hub 4-0:1.0: 2 ports detected [ 38.615677] hub 4-0:1.0: standalone hub [ 38.615678] hub 4-0:1.0: no power switching (usb 1.0) [ 38.615679] hub 4-0:1.0: individual port over-current protection [ 38.615681] hub 4-0:1.0: power on to power good time: 2ms [ 38.615691] hub 4-0:1.0: local power source is good [ 38.615693] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 38.615734] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 38.615833] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2 [ 38.615891] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 38.615902] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 38.615906] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 38.615913] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '005' [ 38.615924] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 38.779776] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 38.812025] uhci_hcd 0000:00:1d.0: detected 2 ports [ 38.817036] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 38.823860] uhci_hcd 0000:00:1d.0: Performing full reset [ 38.829306] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 38.835182] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080 [ 38.841123] usb usb5: default language 0x0409 [ 38.845625] usb usb5: udev 1, busnum 5, minor = 512 [ 38.850625] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 38.857532] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 38.864941] usb usb5: Product: UHCI Host Controller [ 38.869942] usb usb5: Manufacturer: Linux 2.6.37-rc8-dt5+ uhci_hcd [ 38.876241] usb usb5: SerialNumber: 0000:00:1d.0 [ 38.881198] usb usb5: usb_probe_device [ 38.885077] usb usb5: configuration #1 chosen from 1 choice [ 38.890782] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 38.896797] hub 5-0:1.0: usb_probe_interface [ 38.901190] hub 5-0:1.0: usb_probe_interface - got id [ 38.906360] hub 5-0:1.0: USB hub found [ 38.910243] hub 5-0:1.0: 2 ports detected [ 38.914377] hub 5-0:1.0: standalone hub [ 38.918336] hub 5-0:1.0: no power switching (usb 1.0) [ 38.923510] hub 5-0:1.0: individual port over-current protection [ 38.929637] hub 5-0:1.0: power on to power good time: 2ms [ 38.935171] hub 5-0:1.0: local power source is good [ 38.940171] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 38.947217] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 38.954996] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 [ 38.961167] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 38.968428] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 38.974385] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 38.979739] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '006' [ 38.987420] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 39.020027] uhci_hcd 0000:00:1d.1: detected 2 ports [ 39.025035] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 39.031860] uhci_hcd 0000:00:1d.1: Performing full reset [ 39.037309] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 39.043190] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060 [ 39.049068] uhci_hcd 0000:00:1d.0: port 1 portsc 009b,00 [ 39.054513] hub 5-0:1.0: port 1: status 0101 change 0003 [ 39.054664] usb usb6: default language 0x0409 [ 39.054689] usb usb6: udev 1, busnum 6, minor = 640 [ 39.054691] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 39.054693] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 39.054694] usb usb6: Product: UHCI Host Controller [ 39.054696] usb usb6: Manufacturer: Linux 2.6.37-rc8-dt5+ uhci_hcd [ 39.054698] usb usb6: SerialNumber: 0000:00:1d.1 [ 39.054913] usb usb6: usb_probe_device [ 39.054916] usb usb6: configuration #1 chosen from 1 choice [ 39.054930] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 39.055071] hub 6-0:1.0: usb_probe_interface [ 39.055074] hub 6-0:1.0: usb_probe_interface - got id [ 39.055076] hub 6-0:1.0: USB hub found [ 39.055095] hub 6-0:1.0: 2 ports detected [ 39.055098] hub 6-0:1.0: standalone hub [ 39.055099] hub 6-0:1.0: no power switching (usb 1.0) [ 39.055100] hub 6-0:1.0: individual port over-current protection [ 39.055102] hub 6-0:1.0: power on to power good time: 2ms [ 39.055115] hub 6-0:1.0: local power source is good [ 39.055118] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 39.055174] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 39.055313] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 [ 39.055368] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 39.055378] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 39.055382] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 39.055390] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '007' [ 39.055404] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 39.156053] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.244030] uhci_hcd 0000:00:1d.2: detected 2 ports [ 39.249041] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 39.255867] uhci_hcd 0000:00:1d.2: Performing full reset [ 39.261312] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 39.267187] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040 [ 39.273112] usb usb7: default language 0x0409 [ 39.277614] usb usb7: udev 1, busnum 7, minor = 768 [ 39.282613] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 39.289520] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 39.296930] usb usb7: Product: UHCI Host Controller [ 39.301932] usb usb7: Manufacturer: Linux 2.6.37-rc8-dt5+ uhci_hcd [ 39.308231] usb usb7: SerialNumber: 0000:00:1d.2 [ 39.313180] usb usb7: usb_probe_device [ 39.316043] hub 5-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 39.316065] hub 5-0:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 39.328964] usb usb7: configuration #1 chosen from 1 choice [ 39.334668] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 39.340691] hub 7-0:1.0: usb_probe_interface [ 39.345084] hub 7-0:1.0: usb_probe_interface - got id [ 39.350255] hub 7-0:1.0: USB hub found [ 39.354137] hub 7-0:1.0: 2 ports detected [ 39.358273] hub 7-0:1.0: standalone hub [ 39.362233] hub 7-0:1.0: no power switching (usb 1.0) [ 39.367408] hub 7-0:1.0: individual port over-current protection [ 39.373536] hub 7-0:1.0: power on to power good time: 2ms [ 39.379067] hub 7-0:1.0: local power source is good [ 39.384065] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 39.391103] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '001' [ 39.398890] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 [ 39.405177] Initializing USB Mass Storage driver... [ 39.410326] usbcore: registered new interface driver usb-storage [ 39.416462] USB Mass Storage support registered. [ 39.421370] usbcore: registered new interface driver libusual [ 39.428034] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 39.436038] usbcore: registered new interface driver ums-alauda [ 39.442208] usbcore: registered new interface driver ums-cypress [ 39.448459] usbcore: registered new interface driver ums-datafab [ 39.454717] usbcore: registered new interface driver ums-freecom [ 39.460975] usbcore: registered new interface driver ums-isd200 [ 39.467145] usbcore: registered new interface driver ums-jumpshot [ 39.473490] usbcore: registered new interface driver ums-karma [ 39.479571] usbcore: registered new interface driver ums-onetouch [ 39.485915] usbcore: registered new interface driver ums-sddr09 [ 39.492113] usbcore: registered new interface driver ums-sddr55 [ 39.498286] usbcore: registered new interface driver ums-usbat [ 39.504495] usbcore: registered new interface driver usbserial [ 39.510570] USB Serial support registered for generic [ 39.560040] usb 5-1: ep0 maxpacket = 8 [ 39.581127] usb 5-1: udev 2, busnum 5, minor = 513 [ 39.584030] usb usb3: suspend_rh (auto-stop) [ 39.590449] usb 5-1: New USB device found, idVendor=0557, idProduct=8021 [ 39.597284] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 39.604736] usb 5-1: usb_probe_device [ 39.608527] usb 5-1: configuration #1 chosen from 1 choice [ 39.617130] usb 5-1: adding 5-1:1.0 (config #1, interface 0) [ 39.623049] hub 5-1:1.0: usb_probe_interface [ 39.627452] hub 5-1:1.0: usb_probe_interface - got id [ 39.632626] hub 5-1:1.0: USB hub found [ 39.638131] hub 5-1:1.0: 4 ports detected [ 39.642280] hub 5-1:1.0: standalone hub [ 39.646248] hub 5-1:1.0: individual port power switching [ 39.651701] hub 5-1:1.0: individual port over-current protection [ 39.657837] hub 5-1:1.0: power on to power good time: 100ms [ 39.666128] hub 5-1:1.0: local power source is good [ 39.671148] hub 5-1:1.0: enabling power on all ports [ 39.680152] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '002' [ 39.687868] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.687997] usbcore: registered new interface driver usbserial_generic [ 39.687999] usbserial: USB Serial Driver core [ 39.688148] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter [ 39.688260] usbcore: registered new interface driver belkin [ 39.688261] belkin_sa: v1.3:USB Belkin Serial converter driver [ 39.688354] USB Serial support registered for MCT U232 [ 39.688468] usbcore: registered new interface driver mct_u232 [ 39.688470] mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver [ 39.756280] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 39.766389] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 39.771490] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 39.777063] mice: PS/2 mouse device common for all mice [ 39.783526] rtc_cmos 00:08: RTC can wake from S4 [ 39.788296] hub 5-1:1.0: port 1: status 0301 change 0001 [ 39.816279] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 39.822535] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 39.829460] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 39.832042] usb usb4: suspend_rh (auto-stop) [ 39.839874] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0460) [ 39.847149] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 39.853284] iTCO_vendor_support: vendor-support=0 [ 39.858115] SoftDog: cannot register miscdev on minor=130 (err=-16) [ 39.864521] md: linear personality registered for level -1 [ 39.870148] md: raid0 personality registered for level 0 [ 39.875587] md: raid1 personality registered for level 1 [ 39.881019] md: raid10 personality registered for level 10 [ 39.886627] md: raid6 personality registered for level 6 [ 39.892062] md: raid5 personality registered for level 5 [ 39.897498] md: raid4 personality registered for level 4 [ 39.902938] md: multipath personality registered for level -4 [ 39.908805] md: faulty personality registered for level -5 [ 39.914420] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 128, phase 0, 12 us [ 39.922471] hub 5-1:1.0: state 7 ports 4 chg 0002 evt 0000 [ 39.928298] device-mapper: uevent: version 1.0.3 [ 39.930130] hub 5-1:1.0: port 1, status 0301, change 0000, 1.5 Mb/s [ 39.939788] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com [ 39.948785] device-mapper: multipath: version 1.1.1 loaded [ 39.954409] device-mapper: multipath round-robin: version 1.0.0 loaded [ 39.961066] device-mapper: multipath queue-length: version 0.1.0 loaded [ 39.967804] device-mapper: multipath service-time: version 0.2.0 loaded [ 39.974931] device-mapper: dm-log-userspace: version 1.0.0 loaded [ 39.990590] cpuidle: using governor ladder [ 40.001124] usb 5-1.1: new low speed USB device using uhci_hcd and address 3 [ 40.013470] cpuidle: using governor menu [ 40.017519] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 40.023602] ioatdma 0000:00:16.0: can't derive routing for PCI INT A [ 40.030084] ioatdma 0000:00:16.0: PCI INT A: no GSI [ 40.035190] ioatdma 0000:00:16.0: setting latency timer to 64 [ 40.041218] ioatdma 0000:00:16.0: irq 138 for MSI/MSI-X [ 40.047630] igb 0000:01:00.0: DCA enabled [ 40.051921] igb 0000:01:00.1: DCA enabled [ 40.056099] ioatdma 0000:00:16.1: can't derive routing for PCI INT B [ 40.062577] ioatdma 0000:00:16.1: PCI INT B: no GSI [ 40.067678] ioatdma 0000:00:16.1: setting latency timer to 64 [ 40.073692] ioatdma 0000:00:16.1: irq 139 for MSI/MSI-X [ 40.079864] ioatdma 0000:00:16.2: can't derive routing for PCI INT C [ 40.080038] usb usb6: suspend_rh (auto-stop) [ 40.090741] ioatdma 0000:00:16.2: PCI INT C: no GSI [ 40.095850] ioatdma 0000:00:16.2: setting latency timer to 64 [ 40.101888] ioatdma 0000:00:16.2: irq 140 for MSI/MSI-X [ 40.108131] ioatdma 0000:00:16.3: can't derive routing for PCI INT D [ 40.114634] ioatdma 0000:00:16.3: PCI INT D: no GSI [ 40.119760] ioatdma 0000:00:16.3: setting latency timer to 64 [ 40.125778] ioatdma 0000:00:16.3: irq 141 for MSI/MSI-X [ 40.131931] ioatdma 0000:00:16.4: can't derive routing for PCI INT A [ 40.138431] ioatdma 0000:00:16.4: PCI INT A: no GSI [ 40.143552] ioatdma 0000:00:16.4: setting latency timer to 64 [ 40.149591] ioatdma 0000:00:16.4: irq 142 for MSI/MSI-X [ 40.155762] ioatdma 0000:00:16.5: can't derive routing for PCI INT B [ 40.162248] ioatdma 0000:00:16.5: PCI INT B: no GSI [ 40.167346] ioatdma 0000:00:16.5: setting latency timer to 64 [ 40.173244] usb 5-1.1: skipped 1 descriptor after interface [ 40.173465] ioatdma 0000:00:16.5: irq 143 for MSI/MSI-X [ 40.174470] ioatdma 0000:00:16.6: can't derive routing for PCI INT C [ 40.174472] ioatdma 0000:00:16.6: PCI INT C: no GSI [ 40.174513] ioatdma 0000:00:16.6: setting latency timer to 64 [ 40.174684] ioatdma 0000:00:16.6: irq 144 for MSI/MSI-X [ 40.175697] ioatdma 0000:00:16.7: can't derive routing for PCI INT D [ 40.175699] ioatdma 0000:00:16.7: PCI INT D: no GSI [ 40.175738] ioatdma 0000:00:16.7: setting latency timer to 64 [ 40.175909] ioatdma 0000:00:16.7: irq 145 for MSI/MSI-X [ 40.177550] usbcore: registered new interface driver usbhid [ 40.177552] usbhid: USB HID core driver [ 40.178180] dell-wmi: No known WMI GUID found [ 40.178181] acer-wmi: Acer Laptop ACPI-WMI Extras [ 40.178187] acer-wmi: No or unsupported WMI interface, unable to load [ 40.178877] ALSA device list: [ 40.178878] No soundcards found. [ 40.179106] oprofile: using NMI interrupt. [ 40.265928] usb 5-1.1: skipped 1 descriptor after interface [ 40.266046] netem: version 1.2 [ 40.266049] Netfilter messages via NETLINK v0.30. [ 40.266097] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 40.285822] usb 5-1.1: skipped 1 descriptor after interface [ 40.292044] ctnetlink v0.93: registering with nfnetlink. [ 40.297574] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 40.298118] usb 5-1.1: default language 0x0409 [ 40.309260] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 40.316659] xt_time: kernel timezone is -0000 [ 40.322868] ip_tables: (C) 2000-2006 Netfilter Core Team [ 40.328173] usb 5-1.1: udev 3, busnum 5, minor = 514 [ 40.328175] usb 5-1.1: New USB device found, idVendor=0557, idProduct=2261 [ 40.328177] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 40.328179] usb 5-1.1: Product: CS1716A V1.0.098 [ 40.328180] usb 5-1.1: Manufacturer: ATEN International Co. Ltd [ 40.328500] usb 5-1.1: usb_probe_device [ 40.328503] usb 5-1.1: configuration #1 chosen from 1 choice [ 40.332177] usb 5-1.1: adding 5-1.1:1.0 (config #1, interface 0) [ 40.332447] usbserial_generic 5-1.1:1.0: usb_probe_interface [ 40.332450] usbserial_generic 5-1.1:1.0: usb_probe_interface - got id [ 40.332488] usbhid 5-1.1:1.0: usb_probe_interface [ 40.332489] usbhid 5-1.1:1.0: usb_probe_interface - got id [ 40.397395] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [ 40.403970] arp_tables: (C) 2002 David S. Miller [ 40.408862] TCP bic registered [ 40.412038] TCP cubic registered [ 40.415378] TCP westwood registered [ 40.419039] TCP highspeed registered [ 40.422784] TCP hybla registered [ 40.426180] TCP htcp registered [ 40.429490] TCP vegas registered [ 40.432879] TCP veno registered [ 40.436188] TCP scalable registered [ 40.439784] TCP lp registered [ 40.442927] TCP yeah registered [ 40.446232] TCP illinois registered [ 40.449882] Initializing XFRM netlink socket [ 40.454343] NET: Registered protocol family 17 [ 40.458969] NET: Registered protocol family 15 [ 40.460307] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input3 [ 40.460355] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 8, phase 4, 118 us [ 40.460592] generic-usb 0003:0557:2261.0001: input: USB HID v1.00 Keyboard [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-1.1/input0 [ 40.460627] usb 5-1.1: adding 5-1.1:1.1 (config #1, interface 1) [ 40.460868] usbserial_generic 5-1.1:1.1: usb_probe_interface [ 40.460870] usbserial_generic 5-1.1:1.1: usb_probe_interface - got id [ 40.460895] usbhid 5-1.1:1.1: usb_probe_interface [ 40.460896] usbhid 5-1.1:1.1: usb_probe_interface - got id [ 40.529205] Bridge firewalling registered [ 40.533393] Ebtables v2.0 registered [ 40.540427] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.1/input/input4 [ 40.552917] uhci_hcd 0000:00:1d.0: reserve dev 3 ep82-INT, period 8, phase 4, 118 us [ 40.555366] PM: Hibernation image not present or could not be loaded. [ 40.555395] registered taskstats version 1 [ 40.556463] Magic number: 6:662:781 [ 40.556658] tty ptyq3: hash matches [ 40.576072] usb usb7: suspend_rh (auto-stop) [ 40.583450] rtc_cmos 00:08: setting system clock to 2010-12-31 10:47:46 UTC (1293792466) [ 40.583679] generic-usb 0003:0557:2261.0002: input: USB HID v1.00 Device [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-1.1/input1 [ 40.583711] usb 5-1.1: adding 5-1.1:1.2 (config #1, interface 2) [ 40.583929] usbserial_generic 5-1.1:1.2: usb_probe_interface [ 40.583931] usbserial_generic 5-1.1:1.2: usb_probe_interface - got id [ 40.583960] usbhid 5-1.1:1.2: usb_probe_interface [ 40.583962] usbhid 5-1.1:1.2: usb_probe_interface - got id [ 40.634667] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.2/input/input5 [ 40.647918] generic-usb 0003:0557:2261.0003: input: USB HID v1.10 Mouse [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-1.1/input2 [ 40.661507] /home/wfg/cc/linux-next/drivers/usb/core/inode.c: creating file '003' [ 40.669231] hub 5-1:1.0: state 7 ports 4 chg 0000 evt 0002 [ 42.140219] IP-Config: Complete: [ 42.143321] device=eth0, addr=192.168.1.69, mask=255.255.255.0, gw=192.168.1.1, [ 42.151468] host=lkp-ws02, domain=, nis-domain=(none), [ 42.157254] bootserver=192.168.1.11, rootserver=192.168.1.11, rootpath= [ 42.165376] md: Waiting for all devices to be available before autodetect [ 42.172298] md: If you don't use raid, use raid=noautodetect [ 42.178974] md: Autodetecting RAID arrays. [ 42.183200] md: Scanned 0 and added 0 devices. [ 42.187764] md: autorun ... [ 42.190695] md: ... autorun DONE. [ 42.203887] VFS: Mounted root (nfs filesystem) on device 0:15. [ 42.209903] debug: unmapping init memory ffffffff81fd9000..ffffffff82298000 [ 42.350702] stty used greatest stack depth: 3184 bytes left [ 42.684777] create_static_n used greatest stack depth: 3120 bytes left [ 43.213948] hdparm used greatest stack depth: 2848 bytes left [ 43.762285] sshd (3237): /proc/3237/oom_adj is deprecated, please use /proc/3237/oom_score_adj instead. [ 45.293574] EXT4-fs (sda1): recovery complete [ 45.298321] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 48.360103] XFS mounting filesystem sdc1 [ 48.462129] Ending clean XFS mount for filesystem: sdc1 [ 51.354937] XFS mounting filesystem sdd1 [ 51.469234] Ending clean XFS mount for filesystem: sdd1 [ 54.422974] XFS mounting filesystem sde1 [ 54.541703] Ending clean XFS mount for filesystem: sde1 [ 57.523725] XFS mounting filesystem sdf1 [ 57.623641] Ending clean XFS mount for filesystem: sdf1 [ 60.558210] XFS mounting filesystem sdg1 [ 60.654248] Ending clean XFS mount for filesystem: sdg1 [ 63.559637] XFS mounting filesystem sdh1 [ 63.679641] Ending clean XFS mount for filesystem: sdh1 [ 66.587425] XFS mounting filesystem sdi1 [ 66.705042] Ending clean XFS mount for filesystem: sdi1 [ 69.154381] XFS mounting filesystem sdj1 [ 69.218680] Ending clean XFS mount for filesystem: sdj1 [ 71.685529] XFS mounting filesystem sdk1 [ 71.761158] Ending clean XFS mount for filesystem: sdk1 [ 74.200666] XFS mounting filesystem sdl1 [ 74.262139] Ending clean XFS mount for filesystem: sdl1