commit ba95fd47d177d46743ad94055908d22840370e06 Merge: 59af0a0... be987fd... Author: Linus Torvalds Date: Wed Feb 18 18:33:04 2009 -0800 Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block * 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: fix deadlock in blk_abort_queue() for drivers that readd to timeout list block: fix booting from partitioned md array block: revert part of 18ce3751ccd488c78d3827e9f6bf54e6322676fb cciss: PCI power management reset for kexec paride/pg.c: xs(): &&/|| confusion fs/bio: bio_alloc_bioset: pass right object ptr to mempool_free block: fix bad definition of BIO_RW_SYNC bsg: Fix sense buffer bug in SG_IO commit 59af0a0b5848caf38f1bf7013905c3e9cdba4d1d Merge: f04b30d... 3ebf74b... Author: Linus Torvalds Date: Wed Feb 18 17:55:15 2009 -0800 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: omap_hsmmc: Change while(); loops with finite version omap_hsmmc: recover from transfer failures omap_hsmmc: only MMC1 allows HCTL.SDVS != 1.8V omap_hsmmc: card detect irq bugfix sdhci: fix led naming mmc_test: fix basic read test s3cmci: Fix hangup in do_pio_write() Revert "sdhci: force high speed capability on some controllers" MMC: fix bug - SDHC card capacity not correct commit f04b30de3c82528f1ab4c58b3dd4c975f5341901 Author: Ingo Molnar Date: Wed Feb 18 14:48:43 2009 -0800 inotify: fix GFP_KERNEL related deadlock Enhanced lockdep coverage of __GFP_NOFS turned up this new lockdep assert: [ 1093.677775] [ 1093.677781] ================================= [ 1093.680031] [ INFO: inconsistent lock state ] [ 1093.680031] 2.6.29-rc5-tip-01504-gb49eca1-dirty #1 [ 1093.680031] --------------------------------- [ 1093.680031] inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage. [ 1093.680031] kswapd0/308 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 1093.680031] (&inode->inotify_mutex){+.+.?.}, at: [] inotify_inode_is_dead+0x20/0x80 [ 1093.680031] {RECLAIM_FS-ON-W} state was registered at: [ 1093.680031] [] mark_held_locks+0x43/0x5b [ 1093.680031] [] lockdep_trace_alloc+0x6c/0x6e [ 1093.680031] [] kmem_cache_alloc+0x20/0x150 [ 1093.680031] [] idr_pre_get+0x27/0x6c [ 1093.680031] [] inotify_handle_get_wd+0x25/0xad [ 1093.680031] [] inotify_add_watch+0x7a/0x129 [ 1093.680031] [] sys_inotify_add_watch+0x20f/0x250 [ 1093.680031] [] sysenter_do_call+0x12/0x35 [ 1093.680031] [] 0xffffffff [ 1093.680031] irq event stamp: 60417 [ 1093.680031] hardirqs last enabled at (60417): [] call_rcu+0x53/0x59 [ 1093.680031] hardirqs last disabled at (60416): [] call_rcu+0x17/0x59 [ 1093.680031] softirqs last enabled at (59656): [] __do_softirq+0x157/0x16b [ 1093.680031] softirqs last disabled at (59651): [] do_softirq+0x74/0x15d [ 1093.680031] [ 1093.680031] other info that might help us debug this: [ 1093.680031] 2 locks held by kswapd0/308: [ 1093.680031] #0: (shrinker_rwsem){++++..}, at: [] shrink_slab+0x36/0x189 [ 1093.680031] #1: (&type->s_umount_key#4){+++++.}, at: [] shrink_dcache_memory+0x110/0x1fb [ 1093.680031] [ 1093.680031] stack backtrace: [ 1093.680031] Pid: 308, comm: kswapd0 Not tainted 2.6.29-rc5-tip-01504-gb49eca1-dirty #1 [ 1093.680031] Call Trace: [ 1093.680031] [] valid_state+0x12a/0x13d [ 1093.680031] [] mark_lock+0xc1/0x1e9 [ 1093.680031] [] ? check_usage_forwards+0x0/0x3f [ 1093.680031] [] __lock_acquire+0x2c6/0xac8 [ 1093.680031] [] ? register_lock_class+0x17/0x228 [ 1093.680031] [] lock_acquire+0x5d/0x7a [ 1093.680031] [] ? inotify_inode_is_dead+0x20/0x80 [ 1093.680031] [] __mutex_lock_common+0x3a/0x4cb [ 1093.680031] [] ? inotify_inode_is_dead+0x20/0x80 [ 1093.680031] [] mutex_lock_nested+0x2e/0x36 [ 1093.680031] [] ? inotify_inode_is_dead+0x20/0x80 [ 1093.680031] [] inotify_inode_is_dead+0x20/0x80 [ 1093.680031] [] dentry_iput+0x90/0xc2 [ 1093.680031] [] d_kill+0x21/0x45 [ 1093.680031] [] __shrink_dcache_sb+0x27f/0x355 [ 1093.680031] [] shrink_dcache_memory+0x15e/0x1fb [ 1093.680031] [] shrink_slab+0x121/0x189 [ 1093.680031] [] kswapd+0x39f/0x561 [ 1093.680031] [] ? isolate_pages_global+0x0/0x233 [ 1093.680031] [] ? autoremove_wake_function+0x0/0x43 [ 1093.680031] [] ? kswapd+0x0/0x561 [ 1093.680031] [] kthread+0x41/0x82 [ 1093.680031] [] ? kthread+0x0/0x82 [ 1093.680031] [] kernel_thread_helper+0x7/0x10 inotify_handle_get_wd() does idr_pre_get() which does a kmem_cache_alloc() without __GFP_FS - and is hence deadlockable under extreme MM pressure. Signed-off-by: Ingo Molnar Acked-by: Peter Zijlstra Cc: MinChan Kim Cc: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit be50344e604f956891fc0013f1ba78823a758124 Author: Michael Buesch Date: Wed Feb 18 14:48:41 2009 -0800 spi-gpio: sanitize MISO bitvalue gpio_get_value() returns 0 or nonzero, but getmiso() expects 0 or 1. Sanitize the value to a 0/1 boolean. Signed-off-by: Michael Buesch Acked-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit 97bef7dd05563807539122c488a5dd93ed327722 Author: Bernhard Walle Date: Wed Feb 18 14:48:40 2009 -0800 Bernhard has moved Since I don't work for SUSE any more and the bwalle@suse.de address is invalid, correct it in the copyright headers and documentation. Signed-off-by: Bernhard Walle Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit 310d8c93f9f07499cd7ca82d7997774a89de00e7 Author: Randy Dunlap Date: Wed Feb 18 14:48:39 2009 -0800 x86: dell-laptop: depends on POWER_SUPPLY Build breaks when DELL_LAPTOP=y and POWER_SUPPLY=m. DELL_LAPTOP needs to depend on POWER_SUPPLY. dell-laptop.c:(.text+0x1ef3c4): undefined reference to `power_supply_is_system_supplied' dell-laptop.c:(.text+0x1ef45e): undefined reference to `power_supply_is_system_supplied' Signed-off-by: Randy Dunlap Cc: Matthew Garrett Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: Len Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit 2db69a9340da12a4db44edb7506dd68799aeff55 Author: Bill Nottingham Date: Wed Feb 18 14:48:39 2009 -0800 vt: Declare PIO_CMAP/GIO_CMAP as compatbile ioctls. Otherwise, these don't work when called from 32-bit userspace on 64-bit kernels. Cc: Jiri Kosina Cc: Alan Cox Cc: [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit a1a5c3b9237662f326cc730e167e7524b5d05a36 Author: Krzysztof Helt Date: Wed Feb 18 14:48:38 2009 -0800 fbdev/drm: fix Kconfig submenu mess in "Graphics support" Submenus of the graphics support "Support for frame buffer devices" and "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)" are broken in half after latest changes for Intel 915 mode setting support. The DRM subsection is broken because one option is put outside the choice section it depends on. The frame buffers part is broken then due to circular dependency. Fix this by make Intel frame buffers depend on CONFIG_INTEL_AGP. Kconfigs are broken by d2f59357700487a8b944f4f7777d1e97cf5ea2ed ("drm/i915: select framebuffer support automatically"). This is probably not only way to fix this. Signed-off-by: Krzysztof Helt Cc: Ingo Molnar Cc: Dave Airlie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit 5a74db06cc8d36a325913aa4968ae169f997a466 Author: Philippe De Muyter Date: Wed Feb 18 14:48:36 2009 -0800 floppy: request and release only the ports we actually use The floppy driver requests an I/O port it doesn't need, and sometimes this causes a conflict with a motherboard device reported by PNPBIOS. This patch makes the floppy driver request and release only the ports it actually uses. It also factors out the request/release stuff and the io-ports list so they're all in one place now. The current floppy driver uses only these ports: 0x3f2 (FD_DOR) 0x3f4 (FD_STATUS) 0x3f5 (FD_DATA) 0x3f7 (FD_DCR/FD_DIR) but it requests 0x3f2-0x3f5 and 0x3f7, which includes the unused port 0x3f3. Some BIOSes report 0x3f3 as a motherboard resource. The PNP system driver reserves that, which causes a conflict when the floppy driver requests 0x3f2-0x3f5 later. Philippe reported that this conflict broke the floppy driver between 2.6.11 and 2.6.22. His PNPBIOS reports these devices: $ cat 00:07/id 00:07/resources # motherboard device PNP0c02 state = active io 0x80-0x80 io 0x10-0x1f io 0x22-0x3f io 0x44-0x5f io 0x90-0x9f io 0xa2-0xbf io 0x3f0-0x3f1 io 0x3f3-0x3f3 $ cat 00:03/id 00:03/resources # floppy device PNP0700 state = active io 0x3f4-0x3f5 io 0x3f2-0x3f2 Reference: http://lkml.org/lkml/2009/1/31/162 Signed-off-by: Bjorn Helgaas Signed-off-by: Philippe De Muyter Reported-by: Philippe De Muyter Tested-by: Philippe De Muyter Cc: Adam M Belay Cc: Robert Hancock Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit ffa7525c13eb3db0fd19a3e1cffe2ce6f561f5f3 Author: Adam Lackorzynski Date: Wed Feb 18 14:48:34 2009 -0800 jsm: additional device support I have a Digi Neo 8 PCI card (114f:00b1) Serial controller: Digi International Digi Neo 8 (rev 05) that works with the jsm driver after using the following patch. Signed-off-by: Adam Lackorzynski Cc: Scott H Kilau Cc: Wendy Xiong Acked-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit cc2559bccc72767cb446f79b071d96c30c26439b Author: KAMEZAWA Hiroyuki Date: Wed Feb 18 14:48:33 2009 -0800 mm: fix memmap init for handling memory hole Now, early_pfn_in_nid(PFN, NID) may returns false if PFN is a hole. and memmap initialization was not done. This was a trouble for sparc boot. To fix this, the PFN should be initialized and marked as PG_reserved. This patch changes early_pfn_in_nid() return true if PFN is a hole. Signed-off-by: KAMEZAWA Hiroyuki Reported-by: David Miller Tested-by: KOSAKI Motohiro Cc: Mel Gorman Cc: Heiko Carstens Cc: [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit f2dbcfa738368c8a40d4a5f0b65dc9879577cb21 Author: KAMEZAWA Hiroyuki Date: Wed Feb 18 14:48:32 2009 -0800 mm: clean up for early_pfn_to_nid() What's happening is that the assertion in mm/page_alloc.c:move_freepages() is triggering: BUG_ON(page_zone(start_page) != page_zone(end_page)); Once I knew this is what was happening, I added some annotations: if (unlikely(page_zone(start_page) != page_zone(end_page))) { printk(KERN_ERR "move_freepages: Bogus zones: " "start_page[%p] end_page[%p] zone[%p]\n", start_page, end_page, zone); printk(KERN_ERR "move_freepages: " "start_zone[%p] end_zone[%p]\n", page_zone(start_page), page_zone(end_page)); printk(KERN_ERR "move_freepages: " "start_pfn[0x%lx] end_pfn[0x%lx]\n", page_to_pfn(start_page), page_to_pfn(end_page)); printk(KERN_ERR "move_freepages: " "start_nid[%d] end_nid[%d]\n", page_to_nid(start_page), page_to_nid(end_page)); ... And here's what I got: move_freepages: Bogus zones: start_page[2207d0000] end_page[2207dffc0] zone[fffff8103effcb00] move_freepages: start_zone[fffff8103effcb00] end_zone[fffff8003fffeb00] move_freepages: start_pfn[0x81f600] end_pfn[0x81f7ff] move_freepages: start_nid[1] end_nid[0] My memory layout on this box is: [ 0.000000] Zone PFN ranges: [ 0.000000] Normal 0x00000000 -> 0x0081ff5d [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[8] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00020000 [ 0.000000] 1: 0x00800000 -> 0x0081f7ff [ 0.000000] 1: 0x0081f800 -> 0x0081fe50 [ 0.000000] 1: 0x0081fed1 -> 0x0081fed8 [ 0.000000] 1: 0x0081feda -> 0x0081fedb [ 0.000000] 1: 0x0081fedd -> 0x0081fee5 [ 0.000000] 1: 0x0081fee7 -> 0x0081ff51 [ 0.000000] 1: 0x0081ff59 -> 0x0081ff5d So it's a block move in that 0x81f600-->0x81f7ff region which triggers the problem. This patch: Declaration of early_pfn_to_nid() is scattered over per-arch include files, and it seems it's complicated to know when the declaration is used. I think it makes fix-for-memmap-init not easy. This patch moves all declaration to include/linux/mm.h After this, if !CONFIG_NODES_POPULATES_NODE_MAP && !CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID -> Use static definition in include/linux/mm.h else if !CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID -> Use generic definition in mm/page_alloc.c else -> per-arch back end function will be called. Signed-off-by: KAMEZAWA Hiroyuki Tested-by: KOSAKI Motohiro Reported-by: David Miller Cc: Mel Gorman Cc: Heiko Carstens Cc: [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit ada723dcd681e2dffd7d73345cc8fda0eb0df9bd Author: Peter Zijlstra Date: Wed Feb 18 14:48:30 2009 -0800 fs/super.c: add lockdep annotation to s_umount Li Zefan said: Thread 1: for ((; ;)) { mount -t cpuset xxx /mnt > /dev/null 2>&1 cat /mnt/cpus > /dev/null 2>&1 umount /mnt > /dev/null 2>&1 } Thread 2: for ((; ;)) { mount -t cpuset xxx /mnt > /dev/null 2>&1 umount /mnt > /dev/null 2>&1 } (Note: It is irrelevant which cgroup subsys is used.) After a while a lockdep warning showed up: ============================================= [ INFO: possible recursive locking detected ] 2.6.28 #479 --------------------------------------------- mount/13554 is trying to acquire lock: (&type->s_umount_key#19){--..}, at: [] sget+0x5e/0x321 but task is already holding lock: (&type->s_umount_key#19){--..}, at: [] sget+0x1e2/0x321 other info that might help us debug this: 1 lock held by mount/13554: #0: (&type->s_umount_key#19){--..}, at: [] sget+0x1e2/0x321 stack backtrace: Pid: 13554, comm: mount Not tainted 2.6.28-mc #479 Call Trace: [] validate_chain+0x4c6/0xbbd [] __lock_acquire+0x676/0x700 [] lock_acquire+0x5d/0x7a [] ? sget+0x5e/0x321 [] down_write+0x34/0x50 [] ? sget+0x5e/0x321 [] sget+0x5e/0x321 [] ? cgroup_set_super+0x0/0x3e [] ? cgroup_test_super+0x0/0x2f [] cgroup_get_sb+0x98/0x2e7 [] cpuset_get_sb+0x4a/0x5f [] vfs_kern_mount+0x40/0x7b [] do_kern_mount+0x37/0xbf [] do_mount+0x5c3/0x61a [] ? copy_mount_options+0x2c/0x111 [] sys_mount+0x69/0xa0 [] sysenter_do_call+0x12/0x31 The cause is after alloc_super() and then retry, an old entry in list fs_supers is found, so grab_super(old) is called, but both functions hold s_umount lock: struct super_block *sget(...) { ... retry: spin_lock(&sb_lock); if (test) { list_for_each_entry(old, &type->fs_supers, s_instances) { if (!test(old, data)) continue; if (!grab_super(old)) <--- 2nd: down_write(&old->s_umount); goto retry; if (s) destroy_super(s); return old; } } if (!s) { spin_unlock(&sb_lock); s = alloc_super(type); <--- 1th: down_write(&s->s_umount) if (!s) return ERR_PTR(-ENOMEM); goto retry; } ... } It seems like a false positive, and seems like VFS but not cgroup needs to be fixed. Peter said: We can simply put the new s_umount instance in a but lockdep doesn't particularly cares about subclass order. If there's any issue with the callers of sget() assuming the s_umount lock being of sublcass 0, then there is another annotation we can use to fix that, but lets not bother with that if this is sufficient. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=12673 Signed-off-by: Peter Zijlstra Tested-by: Li Zefan Reported-by: Li Zefan Cc: Al Viro Cc: Paul Menage Cc: Arjan van de Ven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit 27c0c8e511fa9e2389503926840fac606d90a049 Author: Atsushi Nemoto Date: Wed Feb 18 14:48:28 2009 -0800 atmel_serial might lose modem status change I found a problem of handling of modem status of atmel_serial driver. With the commit 1ecc26 ("atmel_serial: split the interrupt handler"), handling of modem status signal was splitted into two parts. The atmel_tasklet_func() compares new status with irq_status_prev, but irq_status_prev is not correct if signal status was changed while the port is closed. Here is a sequence to cause problem: 1. Remote side sets CTS (and DSR). 2. Local side close the port. 3. Local side clears RTS and DTR. 4. Remote side clears CTS and DSR. 5. Local side reopen the port. hw_stopped becomes 1. 6. Local side sets RTS and DTR. 7. Remote side sets CTS and DSR. Then CTS change interrupt can be received, but since CTS bit in irq_status_prev and new status is same, uart_handle_cts_change() will not be called (so hw_stopped will not be cleared, i.e. cannot send any data). I suppose irq_status_prev should be initialized at somewhere in open sequence. Itai Levi pointed out that we need to initialize atmel_port->irq_status as well here. His analysis is as follows: > Regarding the second part of the patch (which resets irq_status_prev), > it turns out that both versions of the patch (mine and Atsushi's) > still leave enough room for faulty behavior when opening the port. > > This is because we are not resetting both irq_status_prev and > irq_status in atmel_startup() to CSR, which leads faulty behavior in > the following sequences: > > First case: > 1. closing the port while CTS line = 1 (TX not allowed) > 2. setting CTS line = 0 (TX allowed) > 3. opening the port > 4. transmitting one char > 5. Cannot transmit more chars, although CTS line is 0 > > Second case: > 1. closing the port while CTS line = 0 (TX allowed) > 2. setting CTS line = 1 (TX not allowed) > 3. opening the port > 4. receiving some chars > 5. Now we can transmit, although CTS line is 1 > > This reason for this is that the tasklet is scheduled as a result of > TX or RX interrupts (not a status change!), in steps 4 above. Inside > the tasklet, the atmel_port->irq_status (which holds the value from > the previous session) is compared to atmel_port->irq_status_prev. > Hence, a status-change of the CTS line is faultily detected. > > Both cases were verified on 9260 hardware. [haavard.skinnemoen@atmel.com: folded with patch from Itai Levi] Signed-off-by: Atsushi Nemoto Signed-off-by: Haavard Skinnemoen Cc: Remy Bohmer Cc: Marc Pignat Cc: Itai Levi Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit 287d859222e0adbc67666a6154aaf42d7d5bbb54 Author: Dan Williams Date: Wed Feb 18 14:48:26 2009 -0800 atmel-mci: fix initialization of dma slave data The conversion of atmel-mci to dma_request_channel missed the initialization of the channel dma_slave information. The filter_fn passed to dma_request_channel is responsible for initializing the channel's private data. This implementation has the additional benefit of enabling a generic client-channel data passing mechanism. Reviewed-by: Atsushi Nemoto Signed-off-by: Dan Williams Acked-by: Haavard Skinnemoen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit 9ccf3b5e8409927835c4d38cb2f380c9e4349e76 Author: Giuseppe Bilotta Date: Wed Feb 18 14:48:25 2009 -0800 lis3lv02d: add axes knowledge of HP Pavilion dv5 models Add support for HP Pavilion dv5. Since Intel-based models have an inverted x axis, while AMD-based models have an inverted y axis, we introduce a new macro that special-cases axis orientation based on two DMI entries: HP dv5 axis configuration is then based on both the PRODUCT and BOARD name. Signed-off-by: Giuseppe Bilotta Cc: Eric Piel Cc: Pavel Machek Tested-by: Palatis Tseng Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit 137bad32342a613586347341d1307c2b9812ef44 Author: Giuseppe Bilotta Date: Wed Feb 18 14:48:24 2009 -0800 lis3lv02d: support both one- and two-byte sensors Sensors responding with 0x3B to WHO_AM_I only have one data register per direction, thus returning a signed byte from the position which is occupied by the MSB in sensors responding with 0x3A. Since multiple sensors share the reply to WHO_AM_I, we rename the defines to better indicate what they identify (family of single and double precision sensors). We support both kind of sensors by checking for the sensor type on init and defining appropriate data-access routines and sensor limits (for the joystick) depending on what we find. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Giuseppe Bilotta Acked-by: Eric Piel Cc: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit ef2cfc790bf5f0ff189b01eabc0f4feb5e8524df Author: Pavel Machek Date: Wed Feb 18 14:48:23 2009 -0800 hp accelerometer: add freefall detection This adds freefall handling to hp_accel driver. According to HP, it should just work, without us having to set the chip up by hand. hpfall.c is example .c program that parks the disk when accelerometer detects free fall. It should work; for now, it uses fixed 20seconds protection period. Signed-off-by: Pavel Machek Cc: Thomas Renninger Cc: Éric Piel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit 3a5093ee6728c8cbe9c039e685fc1fca8f965048 Author: Alexey Dobriyan Date: Wed Feb 18 14:48:22 2009 -0800 eeepc: should depend on INPUT Otherwise with INPUT=m, EEEPC_LAPTOP=y one gets drivers/built-in.o: In function `input_sync': eeepc-laptop.c:(.text+0x18ce51): undefined reference to `input_event' drivers/built-in.o: In function `input_report_key': eeepc-laptop.c:(.text+0x18ce73): undefined reference to `input_event' drivers/built-in.o: In function `eeepc_hotk_check': eeepc-laptop.c:(.text+0x18d05f): undefined reference to `input_allocate_device' eeepc-laptop.c:(.text+0x18d10f): undefined reference to `input_register_device' eeepc-laptop.c:(.text+0x18d131): undefined reference to `input_free_device' drivers/built-in.o: In function `eeepc_backlight_exit': eeepc-laptop.c:(.text+0x18d546): undefined reference to `input_unregister_device' Signed-off-by: Alexey Dobriyan Cc: Len Brown Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit 42f5e039c3f6512271636928ddc4e7f7a0371672 Author: Rafael J. Wysocki Date: Wed Feb 18 14:48:21 2009 -0800 pm: fix build for CONFIG_PM unset Compilation of kprobes.c with CONFIG_PM unset is broken due to some broken config dependncies. Fix that. Signed-off-by: Rafael J. Wysocki Reported-by: Ingo Molnar Tested-by: Masami Hiramatsu Cc: Len Brown Acked-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit 67e055d144c5b2acdc1c63811fde031263bf92c5 Author: Li Zefan Date: Wed Feb 18 14:48:20 2009 -0800 cgroups: fix possible use after free In cgroup_kill_sb(), root is freed before sb is detached from the list, so another sget() may find this sb and call cgroup_test_super(), which will access the root that has been freed. Reported-by: Al Viro Signed-off-by: Li Zefan Acked-by: Paul Menage Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit 1cf6e7d83bf334cc5916137862c920a97aabc018 Author: Nick Piggin Date: Wed Feb 18 14:48:18 2009 -0800 mm: task dirty accounting fix YAMAMOTO-san noticed that task_dirty_inc doesn't seem to be called properly for cases where set_page_dirty is not used to dirty a page (eg. mark_buffer_dirty). Additionally, there is some inconsistency about when task_dirty_inc is called. It is used for dirty balancing, however it even gets called for __set_page_dirty_no_writeback. So rather than increment it in a set_page_dirty wrapper, move it down to exactly where the dirty page accounting stats are incremented. Cc: YAMAMOTO Takashi Signed-off-by: Nick Piggin Acked-by: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit 610d18f4128ebbd88845d0fc60cce67b49af881e Author: Davide Libenzi Date: Wed Feb 18 14:48:18 2009 -0800 timerfd: add flags check As requested by Michael, add a missing check for valid flags in timerfd_settime(), and make it return EINVAL in case some extra bits are set. Michael said: If this is to be any use to userland apps that want to check flag support (perhaps it is too late already), then the sooner we get it into the kernel the better: 2.6.29 would be good; earlier stables as well would be even better. [akpm@linux-foundation.org: remove unused TFD_FLAGS_SET] Acked-by: Michael Kerrisk Signed-off-by: Davide Libenzi Cc: [2.6.27.x, 2.6.28.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit ef35ce231b3cb2a4b1808e826da263bf37ccb38a Author: Pavel Machek Date: Wed Feb 18 14:48:16 2009 -0800 Pavel has moved My @suse.cz address will stop working some day, so put working one into MAINTAINERS/CREDITS. It would be cool to get this to 2.6.29... it should not really break anything. Signed-off-by: Pavel Machek Cc: Jiri Kosina Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit 8f19d472935c83d823fa4cf02bcc0a7b9952db30 Author: Eric Biederman Date: Wed Feb 18 14:48:16 2009 -0800 seq_file: properly cope with pread Currently seq_read assumes that the offset passed to it is always the offset it passed to user space. In the case pread this assumption is broken and we do the wrong thing when presented with pread. To solve this I introduce an offset cache inside of struct seq_file so we know where our logical file position is. Then in seq_read if we try to read from another offset we reset our data structures and attempt to go to the offset user space wanted. [akpm@linux-foundation.org: restore FMODE_PWRITE] [pjt@google.com: seq_open needs its fmode opened up to take advantage of this] Signed-off-by: Eric Biederman Cc: Alexey Dobriyan Cc: Al Viro Cc: Paul Turner Cc: [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit 55ec82176eca52e4e0530a82a0eb59160a1a95a1 Author: Paul Turner Date: Wed Feb 18 14:48:15 2009 -0800 vfs: separate FMODE_PREAD/FMODE_PWRITE into separate flags Separate FMODE_PREAD and FMODE_PWRITE into separate flags to reflect the reality that the read and write paths may have independent restrictions. A git grep verifies that these flags are always cleared together so this new behavior will only apply to interfaces that change to clear flags individually. This is required for "seq_file: properly cope with pread", a post-2.6.25 regression fix. [akpm@linux-foundation.org: add comment] Signed-off-by: Paul Turner Cc: Eric Biederman Cc: Alexey Dobriyan Cc: Al Viro Cc: [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit b851ee7921fabdd7dfc96ffc4e9609f5062bd12b Author: Li Zefan Date: Wed Feb 18 14:48:14 2009 -0800 cgroups: update documentation about css_set hash table The css_set hash table was introduced in 2.6.26, so update the documentation accordingly. Signed-off-by: Li Zefan Acked-by: Paul Menage Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit b6d6c5175809934e04a606d9193ef04924a7a7d9 Author: Ed Cashin Date: Wed Feb 18 14:48:13 2009 -0800 aoe: ignore vendor extension AoE responses The Welland ME-747K-SI AoE target generates unsolicited AoE responses that are marked as vendor extensions. Instead of ignoring these packets, the aoe driver was generating kernel messages for each unrecognized response received. This patch corrects the behavior. Signed-off-by: Ed Cashin Reported-by: Tested-by: Cc: Cc: Alex Buell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit c296861291669f305deef19b78042330d7135017 Author: Benjamin Herrenschmidt Date: Wed Feb 18 14:48:12 2009 -0800 vmalloc: add __get_vm_area_caller() We have get_vm_area_caller() and __get_vm_area() but not __get_vm_area_caller() On powerpc, I use __get_vm_area() to separate the ranges of addresses given to vmalloc vs. ioremap (various good reasons for that) so in order to be able to implement the new caller tracking in /proc/vmallocinfo, I need a "_caller" variant of it. (akpm: needed for ongoing powerpc development, so merge it early) [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Benjamin Herrenschmidt Reviewed-by: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds commit 3ebf74b1de9f94da4291db3ea1ae11c5bedb5784 Author: Jean Pihet Date: Fri Feb 6 16:42:51 2009 +0100 omap_hsmmc: Change while(); loops with finite version Replace the infinite 'while() ;' loops with a finite loop version. Signed-off-by: Jean Pihet Acked-by: Tony Lindgren Signed-off-by: Pierre Ossman commit c232f457e409b34417166596ea3daf298ace95c9 Author: Jean Pihet Date: Wed Feb 11 13:11:39 2009 -0800 omap_hsmmc: recover from transfer failures Timeouts during a command that has a data phase can result in the next command issued after the command that failed not being processed, i.e. no interrupt ever occurs to indicate the command has completed. This failure can result in a deadlock. This patch resets the data state machine to clear the error in case of a command timeout. Tested on OMAP3430 chip and intensive MMC/SD device removal while transferring data. Signed-off-by: Andy Lowe Signed-off-by: Jean Pihet Signed-off-by: Adrian Hunter Signed-off-by: Andrew Morton Acked-by: Tony Lindgren Signed-off-by: Pierre Ossman commit eb25082657be3e7639e349fc926afdcbb0a4dc65 Author: David Brownell Date: Tue Feb 17 14:49:01 2009 -0800 omap_hsmmc: only MMC1 allows HCTL.SDVS != 1.8V Based on a patch from Tony Lindgren ... after initialization, never change HCTL.SDVS except for MMC1. The other controller instances only support 1.8V in that field, although they can suport other card/SDIO/eMMC/... voltages with level shifting solutions such as external transceivers. MMC2 behavior sanity tested on Overo/WLAN, OMAP3430 SDP, and custom hardware. MMC1 also sanity tested on those platforms plus Beagle. This also fixes a bug preventing MMC2 (and also presumably MMC3) from powering down when requested. Signed-off-by: David Brownell Acked-by: Tony Lindgren Signed-off-by: Pierre Ossman commit 249d0fa9d59b6165ecc224720d9ce9b7267cf1b8 Author: David Brownell Date: Wed Feb 4 14:42:03 2009 -0800 omap_hsmmc: card detect irq bugfix Work around lockdep issue when card detect IRQ handlers run in thread context ... it forces IRQF_DISABLED, which prevents all access to twl4030 card detect signals. Signed-off-by: David Brownell Acked-by: Tony Lindgren Signed-off-by: Pierre Ossman commit 5dbace0c9ba110c1a3810a89fa6bf12b7574b5a3 Author: Helmut Schaa Date: Sat Feb 14 16:22:39 2009 +0100 sdhci: fix led naming Fix the led device naming for the sdhci driver. The led class documentation defines the led name to have the form "devicename:colour:function" while not applicable sections should be left blank. To comply with the documentation the led device name is changed from "mmc*" to "mmc*::". Signed-off-by: Helmut Schaa Signed-off-by: Pierre Ossman commit 58a5dd3e0e77029d3db1f8fa75d0b54b38169d5d Author: Rabin Vincent Date: Fri Feb 13 22:55:26 2009 +0530 mmc_test: fix basic read test Due to a typo in the Basic Read test, it's currently identical to the Basic Write test. Fix this. Signed-off-by: Rabin Vincent Signed-off-by: Pierre Ossman commit 994244883739e4044bef76d4e5d7a9b66dc6c7b6 Author: Yauhen Kharuzhy Date: Wed Feb 11 13:25:52 2009 -0800 s3cmci: Fix hangup in do_pio_write() This commit fixes the regression what was added by commit 088a78af978d0c8e339071a9b2bca1f4cb368f30 "s3cmci: Support transfers which are not multiple of 32 bits." fifo_free() now returns amount of available space in FIFO buffer in bytes. But do_pio_write() writes to FIFO 32-bit words. Condition for return from cycle is (fifo_free() == 0), but when fifo has 1..3 bytes of free space then this condition will never be true and system hangs. This patch changes condition in the while() to (fifo_free() > 3). Signed-off-by: Yauhen Kharuzhy Signed-off-by: Andrew Morton Signed-off-by: Pierre Ossman commit be987fdb55a4726e2fcbab7501f89276bdb57288 Author: Hannes Reinecke Date: Wed Feb 18 10:30:15 2009 +0100 block: fix deadlock in blk_abort_queue() for drivers that readd to timeout list blk_abort_queue() iterates the timeout list and aborts each request on the list, but if the driver error handling readds a request to the timeout list during this processing, we could be looping forever. Fix this by splicing current entries to a local list and run over that list instead. Signed-off-by: Jens Axboe commit 41b8c853a495438208faa5be03bbb0050859163b Author: Neil Brown Date: Wed Feb 18 10:33:59 2009 +0100 block: fix booting from partitioned md array Hi Tejun, it looks like your commit: block: don't depend on consecutive minor space f331c0296f2a9fee0d396a70598b954062603015 broke a particular case for booting from partitioned md/raid devices. That is the second time this has been broken recently. The previous time was fixed by block: do_mounts - accept root= 30f2f0eb4bd2c43d10a8b0d872c6e5ad8f31c9a0 Because the data isn't available when an md device is first created (we add disks and set it up after creation), the initial partition scan finds nothing. It is not until the device is opened that another partition scan happens and finds something. So at the point where the kernel parameter "root=/dev/md_d0p1" is being parsed, md_d0 exists, but md_d0p1 does not. However if we let blk_lookup_devt return the correct device number even though the device doesn't exist, then the attempt to mount it will successfully find the partition. I have tried in the past to find a way to get the partition table to be read as soon as the array is assembled but that proved impossible (at the time). I don't remember the details, and could possibly revisit it. However it would be really nice if blk_lookup_devt could be adjusted to again accept non existant partitions. Signed-off-by: Jens Axboe commit 78f707bfc723552e8309b7c38a8d0cc51012e813 Author: Jens Axboe Date: Tue Feb 17 13:59:08 2009 +0100 block: revert part of 18ce3751ccd488c78d3827e9f6bf54e6322676fb The above commit added WRITE_SYNC and switched various places to using that for committing writes that will be waited upon immediately after submission. However, this causes a performance regression with AS and CFQ for ext3 at least, since sync_dirty_buffer() will submit some writes with WRITE_SYNC while ext3 has sumitted others dependent writes without the sync flag set. This causes excessive anticipation/idling in the IO scheduler because sync and async writes get interleaved, causing a big performance regression for the below test case (which is meant to simulate sqlite like behaviour). ---- test case ---- int main(int argc, char **argv) { int fdes, i; FILE *fp; struct timeval start; struct timeval end; struct timeval res; gettimeofday(&start, NULL); for (i=0; i commit 82eb03cfd862a65363fa2826de0dbd5474cfe5e2 Author: Chip Coldwell Date: Mon Feb 16 13:11:56 2009 +0100 cciss: PCI power management reset for kexec The kexec kernel resets the CCISS hardware in three steps: 1. Use PCI power management states to reset the controller in the kexec kernel. 2. Clear the MSI/MSI-X bits in PCI configuration space so that MSI initialization in the kexec kernel doesn't fail. 3. Use the CCISS "No-op" message to determine when the controller firmware has recovered from the PCI PM reset. [akpm@linux-foundation.org: cleanups] Signed-off-by: Mike Miller Cc: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe commit c8cbec6bdf6329279fd14696020f6b59d1d3124d Author: Roel Kluin Date: Mon Feb 16 13:11:55 2009 +0100 paride/pg.c: xs(): &&/|| confusion &&/|| confusion Signed-off-by: Roel Kluin Cc: Bartlomiej Zolnierkiewicz Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe commit a60e78e57a17d55bbd5a96da16fe9649d364b987 Author: Subhash Peddamallu Date: Mon Feb 16 10:27:07 2009 +0100 fs/bio: bio_alloc_bioset: pass right object ptr to mempool_free When freeing from bio pool use right ptr to account for bs->front_pad, instead of bio ptr, Signed-off-by: Subhash Peddamallu Signed-off-by: Jens Axboe commit 93dbb393503d53cd226e5e1f0088fe8f4dbaa2b8 Author: Jens Axboe Date: Mon Feb 16 10:25:40 2009 +0100 block: fix bad definition of BIO_RW_SYNC We can't OR shift values, so get rid of BIO_RW_SYNC and use BIO_RW_SYNCIO and BIO_RW_UNPLUG explicitly. This brings back the behaviour from before 213d9417fec62ef4c3675621b9364a667954d4dd. Signed-off-by: Jens Axboe commit c1c201200a359cf3b6e2e36a4236cdca77a3cd8e Author: Boaz Harrosh Date: Tue Feb 3 07:47:29 2009 +0100 bsg: Fix sense buffer bug in SG_IO When submitting requests via SG_IO, which does a sync io, a bsg_command is not allocated. So an in-Kernel sense_buffer was not set. However when calling blk_execute_rq() with no sense buffer one is provided from the stack. Now bsg at blk_complete_sgv4_hdr_rq() would check if rq->sense_len and a sense was requested by sg_io_v4 the rq->sense was copy_user() back, but by now it is already mangled stack memory. I have fixed that by forcing a sense_buffer when calling bsg_map_hdr(). The bsg_command->sense is provided in the write/read path like before, and on-the-stack buffer is provided when doing SG_IO. I have also fixed a dprintk message to print rq->errors in hex because of the scsi bit-field use of this member. For other block devices it does not matter anyway. Signed-off-by: Boaz Harrosh Acked-by: FUJITA Tomonori Signed-off-by: Jens Axboe commit 86a6a8749d5b8fd5c2b544fe9fd11101e3d0550f Author: Pierre Ossman Date: Mon Feb 2 21:13:49 2009 +0100 Revert "sdhci: force high speed capability on some controllers" This reverts commit a4b76193774b463b922cab2f92450efb20d29ef0. It turned out that the controller had problem running at the higher speed, so go back to trusting the hardware capability bits. Signed-off-by: Pierre Ossman commit 444122fd58fdc83c96877a92b3f6288cafddb08d Author: Yi Li Date: Thu Feb 5 15:31:57 2009 +0800 MMC: fix bug - SDHC card capacity not correct Signed-off-by: Yi Li Signed-off-by: Bryan Wu Signed-off-by: Pierre Ossman commit 5955c7a2cfb6a35429adea5dc480002b15ca8cfc Author: Zlatko Calusic Date: Wed Feb 18 01:33:34 2009 +0100 Add support for VT6415 PCIE PATA IDE Host Controller Signed-off-by: Zlatko Calusic Signed-off-by: Linus Torvalds commit 3494252d5644993f407a45f01c3e8ad5ae38f93c Author: Rafael J. Wysocki Date: Fri Feb 13 23:41:12 2009 +0100 USB/PCI: Fix resume breakage of controllers behind cardbus bridges If a USB PCI controller is behind a cardbus bridge, we are trying to restore its configuration registers too early, before the cardbus bridge is operational. To fix this, call pci_restore_state() from usb_hcd_pci_resume() and remove usb_hcd_pci_resume_early() which is no longer necessary (the configuration spaces of USB controllers that are not behind cardbus bridges will be restored by the PCI PM core with interrupts disabled anyway). This patch fixes the regression from 2.6.28 tracked as http://bugzilla.kernel.org/show_bug.cgi?id=12659 [ Side note: the proper long-term fix is probably to just force the unplug event at suspend time instead of doing a plug/unplug at resume time, but this patch is fine regardless - Linus ] Signed-off-by: Rafael J. Wysocki Reported-by: Miles Lane Signed-off-by: Linus Torvalds commit e78ac4b9deb8f36d8c828b6d91232960f109d951 Merge: 29a0c5c... a0490fa... Author: Linus Torvalds Date: Tue Feb 17 14:30:06 2009 -0800 Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: cpu hotplug fix commit 29a0c5ce5d008f398346d644456d62ab300d5e10 Merge: f8effd1... 3997ad3... Author: Linus Torvalds Date: Tue Feb 17 14:29:42 2009 -0800 Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: timers: more consistently use clock vs timer commit f8effd1a4a1833eac90261d78abacfaefe3d99e4 Merge: 3501033... f9aa28a... Author: Linus Torvalds Date: Tue Feb 17 14:29:15 2009 -0800 Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: doc: mmiotrace.txt, buffer size control change trace: mmiotrace to the tracer menu in Kconfig mmiotrace: count events lost due to not recording commit 35010334aa007480a833401b80922299cb1a15ef Merge: 8ce9a75... be71661... Author: Linus Torvalds Date: Tue Feb 17 14:27:39 2009 -0800 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, vm86: fix preemption bug x86, olpc: fix model detection without OFW x86, hpet: fix for LS21 + HPET = boot hang x86: CPA avoid repeated lazy mmu flush x86: warn if arch_flush_lazy_mmu_cpu is called in preemptible context x86/paravirt: make arch_flush_lazy_mmu/cpu disable preemption x86, pat: fix warn_on_once() while mapping 0-1MB range with /dev/mem x86/cpa: make sure cpa is safe to call in lazy mmu mode x86, ptrace, mm: fix double-free on race commit 8ce9a75a307e142a8871c649627555e0e4a1eefb Merge: b30b774... 9af8814... Author: Linus Torvalds Date: Tue Feb 17 14:26:35 2009 -0800 Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: iommu: fix Intel IOMMU write-buffer flushing futex: fix reference leak Trivial conflicts fixed manually in drivers/pci/intel-iommu.c commit b30b77493039b7b95b4d569a66af425b02651edd Merge: c951aa6... 26456dc... Author: Linus Torvalds Date: Tue Feb 17 14:23:49 2009 -0800 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/vsx: Fix VSX alignment handler for regs 32-63 powerpc/ps3: Move ps3_mm_add_memory to device_initcall powerpc/mm: Fix numa reserve bootmem page selection powerpc/mm: Fix _PAGE_CHG_MASK to protect _PAGE_SPECIAL commit c951aa62d59210636cc63a569bcf3331be7f5b15 Merge: 23beafb... a08f6e0... Author: Linus Torvalds Date: Tue Feb 17 14:23:35 2009 -0800 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: Documentation: fix minor PCIe HOWTO thinko PCI: fix missing kernel-doc and typos PCI: fix struct pci_platform_pm_ops kernel-doc PCI: fix rom.c kernel-doc warning PCI/MSI: fix msi_mask() shift fix commit 23beafbe3abd3f622931e83ef4e6b17642cf408e Merge: 48c0d9e... 8eb2dfa... Author: Linus Torvalds Date: Tue Feb 17 14:22:59 2009 -0800 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: lrw - Fix big endian support commit 48c0d9ece360ff6001e2ae36aa9b34446d0388a8 Merge: 0637810... 2456242... Author: Linus Torvalds Date: Tue Feb 17 14:19:14 2009 -0800 Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable * git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: hold trans_mutex when using btrfs_record_root_in_trans Btrfs: make a lockdep class for the extent buffer locks Btrfs: fs/btrfs/volumes.c: remove useless kzalloc Btrfs: remove unused code in split_state() Btrfs: remove btrfs_init_path Btrfs: balance_level checks !child after access Btrfs: Avoid using __GFP_HIGHMEM with slab allocator Btrfs: don't clean old snapshots on sync(1) Btrfs: use larger metadata clusters in ssd mode Btrfs: process mount options on mount -o remount, Btrfs: make sure all pending extent operations are complete commit 0637810f24bad641d3d3f80fd3f63f3baffd9536 Merge: 51f2677... 7dac745... Author: Linus Torvalds Date: Tue Feb 17 14:16:02 2009 -0800 Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_nv: give up hardreset on nf2 libata-sff: fix 32-bit PIO ATAPI regression commit 51f267739a81db5eb511b95aeae338413690b8a2 Merge: 59dad0c... 9297999... Author: Linus Torvalds Date: Tue Feb 17 14:15:23 2009 -0800 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes * git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes: kbuild: create the source symlink earlier in the objdir scripts: add x86 64 bit support to the markup_oops.pl script scripts: add x86 register parser to markup_oops.pl kbuild: add sys_* entries for syscalls in tags kbuild: fix tags generation of config symbols bootgraph: fix for use with dot symbols kbuild: add vmlinux to kernel rpm kbuild,setlocalversion: shorten the make time when using svn commit 59dad0cbe6fd52e68b1ee4b02cbf89d64a4655cc Merge: 1024d1c... 211e3e0... Author: Linus Torvalds Date: Tue Feb 17 14:14:15 2009 -0800 Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6 * 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: MAINTAINERS: Switch hdaps to Frank Seidel hwmon: Fix ACPI resource check error handling hwmon: (f71882fg) Hide misleading error message commit 1024d1c24bb3f2c4dc568d96d3b5e22ea5865481 Merge: 5e51d16... 7bf432d... Author: Linus Torvalds Date: Tue Feb 17 14:09:03 2009 -0800 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (10626): ivtv: fix regression in get sliced vbi format V4L/DVB (10625): ivtv: fix decoder crash regression V4L/DVB (10619): gspca - main: Destroy the URBs at disconnection time. V4L/DVB (10572): Revert commit dda06a8e4610757def753ee3a541a0b1a1feb36b V4L/DVB (10533): fix LED status output V4L/DVB (10532): Correction of Stereo detection/setting and signal strength indication V4L/DVB (10527): tuner: fix TUV1236D analog/digital setup V4L/DVB (10516a): zoran: Update MAINTAINERS entry commit 5e51d16ddefa0874993f42a4b2beb13127feda76 Merge: 7f302fe... 2b63938... Author: Linus Torvalds Date: Tue Feb 17 14:08:26 2009 -0800 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: fix bus endianity in file2alias HID: move tmff and zpff devices from ignore_list to blacklist HID: unlock properly on error paths in hidraw_ioctl() HID: blacklist Powercom USB UPS commit 7f302fe3173c61e0e4fcf0a6a906ae297225e3be Merge: 68cc830... dcd9651... Author: Linus Torvalds Date: Tue Feb 17 14:08:03 2009 -0800 Merge branch 'for-linus' of git://git.o-hand.com/linux-mfd * 'for-linus' of git://git.o-hand.com/linux-mfd: mfd: Fix sm501_register_gpio section mismatch mfd: fix sm501 section mismatches mfd: terminate pcf50633 i2c_device_id list mfd: Ensure all WM8350 IRQs are masked at startup mfd: fix htc-egpio iomem resource handling using resource_size mfd: Fix TWL4030 build on some ARM variants mfd: wm8350 tries reaches -1 mfd: Mark WM835x USB_SLV_500MA bit as accessible mfd: Improve diagnostics for WM8350 ID register probe mfd: Initialise WM8350 interrupts earlier mfd: Fix egpio kzalloc return test commit 68cc8301b45dee5de275a477a60f77f5560c8ca0 Merge: 11df586... 12d60e2... Author: Linus Torvalds Date: Tue Feb 17 14:07:18 2009 -0800 Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog * git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] iTCO_wdt: fix SMI_EN regression 2 commit 11df5864075f763ec0d1fdecd6a3f0af7d09a553 Merge: 2f60971... a3c1239... Author: Linus Torvalds Date: Tue Feb 17 14:05:59 2009 -0800 Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb * 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: wusb: whci-hcd: always lock whc->lock with interrupts disabled commit 2f6097129af5625db2fb5e601f89e5bf55cd1dcd Author: Roel Kluin Date: Mon Feb 16 12:49:16 2009 +0000 FRV: __pte_to_swp_entry doesn't expand correctly The macro doesn't expand correctly when its parameter isn't 'pte'. Signed-off-by: Roel Kluin Signed-off-by: David Howells Signed-off-by: Linus Torvalds commit 3512a79dbcc90e6edac98717607bd821bba50a14 Merge: 39a6576... 0905426... Author: Linus Torvalds Date: Tue Feb 17 14:05:05 2009 -0800 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Fix NULL dereference in ext4_ext_migrate()'s error handling ext4: Implement range_cyclic in ext4_da_writepages instead of write_cache_pages ext4: Initialize preallocation list_head's properly ext4: Fix lockdep warning ext4: Fix to read empty directory blocks correctly in 64k jbd2: Avoid possible NULL dereference in jbd2_journal_begin_ordered_truncate() Revert "ext4: wait on all pending commits in ext4_sync_fs()" jbd2: Fix return value of jbd2_journal_start_commit() commit 39a65762d4c48fd8a498f34b7fec74a6b0aebd55 Merge: 643aac1... 516a1a7... Author: Linus Torvalds Date: Tue Feb 17 14:04:32 2009 -0800 Merge branch 'kvm-updates/2.6.29' of git://git.kernel.org/pub/scm/virt/kvm/kvm * 'kvm-updates/2.6.29' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: Flush volatile msrs before emulating rdmsr KVM: Fix assigned devices circular locking dependency KVM: x86: fix LAPIC pending count calculation KVM: Fix INTx for device assignment KVM: MMU: Map device MMIO as UC in EPT KVM: x86: disable kvmclock on non constant TSC hosts KVM: PIT: fix i8254 pending count read KVM: Fix racy in kvm_free_assigned_irq KVM: Add kvm_arch_sync_events to sync with asynchronize events KVM: mmu_notifiers release method KVM: Avoid using CONFIG_ in userspace visible headers KVM: ia64: fix fp fault/trap handler commit 643aac1e2a34aa1d46a2d95c2a4087873f01e25e Merge: ca77fde... 1371be0... Author: Linus Torvalds Date: Tue Feb 17 14:04:00 2009 -0800 Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus * git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: cpumask: Use cpu_*_mask accessors code: alpha cpumask: fix powernow-k8: partial revert of 2fdf66b491ac706657946442789ec644cc317e1a commit ca77fde8e62cecb2c0769052228d15b901367af8 Author: David Woodhouse Date: Fri Feb 13 23:18:03 2009 +0000 Fix Intel IOMMU write-buffer flushing This is the cause of the DMA faults and disk corruption that people have been seeing. Some chipsets neglect to report the RWBF "capability" -- the flag which says that we need to flush the chipset write-buffer when changing the DMA page tables, to ensure that the change is visible to the IOMMU. Override that bit on the affected chipsets, and everything is happy again. Thanks to Chris and Bhavesh and others for helping to debug. Signed-off-by: David Woodhouse Tested-by: Chris Wright Reviewed-by: Bhavesh Davda Signed-off-by: Linus Torvalds commit 1a88b5364b535edaa321d70a566e358390ff0872 Author: Al Viro Date: Mon Feb 16 02:38:12 2009 +0000 Fix incomplete __mntput locking Getting this wrong caused WARNING: at fs/namespace.c:636 mntput_no_expire+0xac/0xf2() due to optimistically checking cpu_writer->mnt outside the spinlock. Here's what we really want: * we know that nobody will set cpu_writer->mnt to mnt from now on * all changes to that sucker are done under cpu_writer->lock * we want the laziest equivalent of spin_lock(&cpu_writer->lock); if (likely(cpu_writer->mnt != mnt)) { spin_unlock(&cpu_writer->lock); continue; } /* do stuff */ that would make sure we won't miss earlier setting of ->mnt done by another CPU. Anyway, for now we just move the spin_lock() earlier and move the test into the properly locked region. Signed-off-by: Al Viro Reported-and-tested-by: Li Zefan Signed-off-by: Linus Torvalds commit 211e3e0e1b116b10ba707db2fec972909fa647fd Author: Frank Seidel Date: Tue Feb 17 19:59:54 2009 +0100 MAINTAINERS: Switch hdaps to Frank Seidel As Rovert Love doesn't any more seem to be realy active on hdaps driver i'll happily take it over. Signed-off-by: Frank Seidel Cc: Robert Love Signed-off-by: Jean Delvare commit 18632f84fac770125c0982dfadec6b551e82144e Author: Hans de Goede Date: Tue Feb 17 19:59:54 2009 +0100 hwmon: Fix ACPI resource check error handling This patch fixes a number of cases where things were not properly cleaned up when acpi_check_resource_conflict() returned an error, causing oopses such as the one reported here: https://bugzilla.redhat.com/show_bug.cgi?id=483208 Signed-off-by: Hans de Goede Signed-off-by: Jean Delvare commit 603eaa1bdd3e0402085e815cc531bb0a32827a9e Author: Jean Delvare Date: Tue Feb 17 19:59:54 2009 +0100 hwmon: (f71882fg) Hide misleading error message If the F71882FG chip is at address 0x4e, then the probe at 0x2e will fail with the following message in the logs: f71882fg: Not a Fintek device This is misleading because there is a Fintek device, just at a different address. So I propose to degrade this message to a debug message. Signed-off-by: Jean Delvare Acked-by: Hans de Goede commit 7bf432d64c47f77111fbce5d48d7774df8b48948 Author: Hans Verkuil Date: Mon Feb 16 04:25:32 2009 -0300 V4L/DVB (10626): ivtv: fix regression in get sliced vbi format The new v4l2_subdev_call used s_fmt instead of g_fmt. Thanks-to: Andy Walls Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab commit ac9575f75c52bcb455120f8c43376b556acba048 Author: Hans Verkuil Date: Sat Feb 14 19:58:33 2009 -0300 V4L/DVB (10625): ivtv: fix decoder crash regression The video_ioctl2 conversion of ivtv in kernel 2.6.27 introduced a bug causing decoder commands to crash. The decoder commands should have been handled from the video_ioctl2 default handler, ensuring correct mapping of the argument between user and kernel space. Unfortunately they ended up before the video_ioctl2 call, causing random crashes. Thanks to hannes@linus.priv.at for testing and helping me track down the cause! Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab commit ad28127d7c7c617bca1d426f95b6ffa1fb8f700f Author: Adam Baker Date: Wed Feb 4 15:33:21 2009 -0300 V4L/DVB (10619): gspca - main: Destroy the URBs at disconnection time. If a device using the gspca framework is unplugged while it is still streaming then the call that is used to free the URBs that have been allocated occurs after the pointer it uses becomes invalid at the end of gspca_disconnect. Make another cleanup call in gspca_disconnect while the pointer is still valid (multiple calls are OK as destroy_urbs checks for pointers already being NULL. Signed-off-by: Adam Baker Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab commit 28100165c3f27f681fee8b60e4e44f64a739c454 Author: Mauro Carvalho Chehab Date: Mon Feb 16 15:27:44 2009 -0300 V4L/DVB (10572): Revert commit dda06a8e4610757def753ee3a541a0b1a1feb36b On Mon, 02 Feb 2009, Hartmut wrote: This change set is wrong. The affected functions cannot be called from an interrupt context, because they may process large buffers. In this case, interrupts are disabled for a long time. Functions, like dvb_dmx_swfilter_packets(), could be called only from a tasklet. This change set does hide some strong design bugs in dm1105.c and au0828-dvb.c. Please revert this change set and do fix the bugs in dm1105.c and au0828-dvb.c (and other files). On Sun, 15 Feb 2009, Oliver Endriss wrote: This changeset _must_ be reverted! It breaks all kernels since 2.6.27 for applications which use DVB and require a low interrupt latency. It is a very bad idea to call the demuxer to process data buffers with interrupts disabled! On Mon, 16 Feb 2009, Trent Piepho wrote: I agree, this is bad. The demuxer is far too much work to be done with IRQs off. IMHO, even doing it under a spin-lock is excessive. It should be a mutex. Drivers should use a work-queue to feed the demuxer. Thank you for testing this changeset and discovering the issues on it. Cc: Trent Piepho Cc: Hartmut Cc: Oliver Endriss Cc: Andreas Oberritter Signed-off-by: Mauro Carvalho Chehab commit 2f94fc465a6504443bb986ba9d36e28e2b422c6e Author: Tobias Lorenz Date: Thu Feb 12 14:56:19 2009 -0300 V4L/DVB (10533): fix LED status output This patch closes one of my todos that was since long on my list. Some people reported clicks and glitches in the audio stream, correlated to the LED color changing cycle. Thanks to Rick Bronson . Signed-off-by: Tobias Lorenz Signed-off-by: Mauro Carvalho Chehab commit d807dec59d3c850b332b5bf95fe33f18def00068 Author: Tobias Lorenz Date: Thu Feb 12 14:56:10 2009 -0300 V4L/DVB (10532): Correction of Stereo detection/setting and signal strength indication Thanks to Bob Ross - correction of stereo detection/setting - correction of signal strength indicator scaling Signed-off-by: Tobias Lorenz Signed-off-by: Mauro Carvalho Chehab commit ef88f2b563275d156beebc9f76ed134f3f90f210 Author: Mauro Carvalho Chehab Date: Fri Feb 13 08:24:34 2009 -0300 V4L/DVB (10527): tuner: fix TUV1236D analog/digital setup As reported by David Engel , ATSC115 doesn't work fine with mythtv. This software opens both analog and dvb interfaces of saa7134. What happens is that some tuner commands are going to the wrong place, as shown at the logs: Feb 12 20:37:48 opus kernel: tuner-simple 1-0061: using tuner params #0 (ntsc) Feb 12 20:37:48 opus kernel: tuner-simple 1-0061: freq = 67.25 (1076), range = 0, config = 0xce, cb = 0x01 Feb 12 20:37:48 opus kernel: tuner-simple 1-0061: Freq= 67.25 MHz, V_IF=45.75 MHz, Offset=0.00 MHz, div=1808 Feb 12 20:37:48 opus kernel: tuner 1-0061: tv freq set to 67.25 Feb 12 20:37:48 opus kernel: tuner-simple 1-000a: using tuner params #0 (ntsc) Feb 12 20:37:48 opus kernel: tuner-simple 1-000a: freq = 67.25 (1076), range = 0, config = 0xce, cb = 0x01 Feb 12 20:37:48 opus kernel: tuner-simple 1-000a: Freq= 67.25 MHz, V_IF=45.75 MHz, Offset=0.00 MHz, div=1808 Feb 12 20:37:48 opus kernel: tuner-simple 1-000a: tv 0x07 0x10 0xce 0x01 Feb 12 20:37:48 opus kernel: tuner-simple 1-0061: tv 0x07 0x10 0xce 0x01 This happens due to a hack at TUV1236D analog setup, where it replaces tuner address, at 0x61 for 0x0a, in order to save a few memory bytes. The code assumes that nobody else would try to access the tuner during that setup, but the point is that there's no lock to protect such access. So, this opens the possibility of race conditions to happen. Instead of hacking tuner address, this patch uses a temporary var with the proper tuner value to be used during the setup. This should save the issue, although we should consider to write some analog/digital lock at saa7134 driver. Signed-off-by: Mauro Carvalho Chehab commit f63145e28934a0b3ad8baf31adc195ec81423351 Author: Trent Piepho Date: Sat Jan 24 20:52:41 2009 -0300 V4L/DVB (10516a): zoran: Update MAINTAINERS entry Ronald Bultje hasn't been maintaining the zoran driver for some time. Re-direct people to the mailing lists and web pages. MAINTAINERS | 6 +++--- Signed-off-by: Trent Piepho Acked-by: Jean Delvare Acked-by: Ronald S. Bultje Signed-off-by: Mauro Carvalho Chehab commit 2b639386a2a26c84c8d26c649cf657ebd43a7bc8 Author: Jiri Slaby Date: Tue Feb 17 12:38:36 2009 +0100 HID: fix bus endianity in file2alias Fix endianness of bus member of hid_device_id in modpost. Signed-off-by: Jiri Slaby Reported-by: Nye Liu Cc: Jiri Kosina Signed-off-by: Jiri Kosina commit daedb3d6a91f9626ab4c921378ac52e44de833d5 Author: Anssi Hannula Date: Sat Feb 14 11:45:05 2009 +0200 HID: move tmff and zpff devices from ignore_list to blacklist The devices handled by hid-tmff and hid-zpff were added in the hid_ignore_list[] instead of hid_blacklist[] in hid-core.c, thus disabling them completely. hid_ignore_list[] causes hid layer to skip the device, while hid_blacklist[] indicates there is a specific driver in hid bus. Re-enable the devices by moving them to the correct list. Signed-off-by: Anssi Hannula Signed-off-by: Jiri Kosina commit dfd395aff4cb16d2480b280064bea1b19ededef1 Author: Dan Carpenter